26 CFR 1.953-3 - Risks deemed to be United States risks.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 10 2010-04-01 2010-04-01 false Risks deemed to be United States risks. 1.953-3... TAX (CONTINUED) INCOME TAXES Controlled Foreign Corporations § 1.953-3 Risks deemed to be United States risks. (a) Artificial arrangements. For purposes of paragraph (a) of § 1.953-1, the term “United...

An Efficient Way to Detect Poststroke Depression by Subsequent Administration of a 9-Item and a 2-Item Patient Health Questionnaire

NARCIS (Netherlands)

de Man-van Ginkel, Janneke M.; Hafsteinsdottir, Thora; Lindeman, Eline; Burger, Huibert; Grobbee, Diederick; Schuurmans, Marieke

Background and Purpose-The early detection of poststroke depression is essential for optimizing recovery after stroke. A prospective study was conducted to investigate the diagnostic value of the 9-item and the 2-item Patient Health Questionnaire (PHQ-9, PHQ-2). Methods-One hundred seventy-one

Characterization equipment essential/support drawing plan

International Nuclear Information System (INIS)

WILSON, G.W.

1999-01-01

The purpose of this document is to list the Characterization equipment drawings that are classified as Essential Drawings and Support Drawings. Essential Drawings: Are those drawings identified by the facility staff as necessary to directly support the safe operation of the facility or equipment (HNF 1997a). Support Drawings: Are those drawings identified by facility staff that further describe the design details of structures, systems, or components shown on essential drawings. (HNF 1997a) The Characterization equipment drawings identified in this report are deemed essential drawings as defined in HNF-PRO-242, Engineering Drawing Requirements (HNF 1997a). These drawings will be prepared, revised, and maintained per HNF-PRO-440, Engineering Document Change Control (HNF 1997b). All other Characterization equipment drawings not identified in this document will be considered General drawings until the Characterization Equipment Drawing Evaluation Report (Wilson 1998) is updated during fiscal year 1999. Trucks 1 and 2 drawings are not included in this revision of the essential drawing list due to uncertainty about future use

20 CFR 404.1059 - Deemed wages for certain individuals interned during World War II.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Deemed wages for certain individuals interned during World War II. 404.1059 Section 404.1059 Employees' Benefits SOCIAL SECURITY ADMINISTRATION FEDERAL...-Employment Income Wages § 404.1059 Deemed wages for certain individuals interned during World War II. (a) In...

20 CFR 404.346 - Your relationship as wife, husband, widow, or widower based upon a deemed valid marriage.

Science.gov (United States)

2010-04-01

... widower based upon a deemed valid marriage. 404.346 Section 404.346 Employees' Benefits SOCIAL SECURITY... relationship as wife, husband, widow, or widower based upon a deemed valid marriage. (a) General. If your... explained in § 404.345, you may be eligible for benefits based upon a deemed valid marriage. You will be...

DEEM, a versatile platform of FRD measurement for highly multiplexed fibre systems in astronomy

Science.gov (United States)

Yan, Yunxiang; Yan, Qi; Wang, Gang; Sun, Weimin; Luo, A.-Li; Ma, Zhenyu; Zhang, Qiong; Li, Jian; Wang, Shuqing

2018-06-01

We present a new method of DEEM, the direct energy encircling method, for characterizing the performance of fibres in most astronomical spectroscopic applications. It is a versatile platform to measure focal ratio degradation (FRD), throughput, and point spread function. The principle of DEEM and the relation between the encircled energy and the spot size were derived and simulated based on the power distribution model (PDM). We analysed the errors of DEEM and pointed out the major error source for better understanding and optimization. The validation of DEEM has been confirmed by comparing the results with conventional method which shows that DEEM has good robustness with high accuracy in both stable and complex experiment environments. Applications on the integral field unit (IFU) show that the FRD of 50 μm core fibre is substandard for the requirement which requires the output focal ratio to be slower than 4.5. The homogeneity of throughput is acceptable and higher than 85 per cent. The prototype IFU of the first generation helps to find out the imperfections to optimize the new design of the next generation based on the staggered structure with 35 μm core fibres of N.A. = 0.12, which can improve the FRD performance. The FRD dependence on wavelength and core size is revealed that higher output focal ratio occurs at shorter wavelengths for large core fibres, which is in agreement with the prediction of PDM. But the dependence of the observed data is weaker than the prediction.

Toward a Consensus in Ethics Education for the Doctor of Nursing Practice.

Science.gov (United States)

Laabs, Carolyn A

2015-01-01

The purpose of this study was to begin to develop a consensus as to the essential content and methods of ethics education for advanced practice nurses. An online Delphi technique was used to survey ethics experts to determine whether items were essential, desirable, or unnecessary to ethics education for students in doctor of nursing practice programs. Only the American Nurses Association Code of Ethics and ethics terminology were deemed essential foundational knowledge.

26 CFR 1.1298-3 - Deemed sale or deemed dividend election by a U.S. person that is a shareholder of a former PFIC.

Science.gov (United States)

2010-04-01

... its stock in the former PFIC for its fair market value on the termination date, as defined in... sale election, the shareholder's stock with respect to which the election was made under this paragraph... the deemed dividend election, the shareholder's stock with respect to which the election was made...

Identification of Essential Food Skills for Skill-Based Healthful Eating Programs in Secondary Schools

Science.gov (United States)

Fordyce-Voorham, Sandra

2011-01-01

Objective: To identify the food skills deemed essential to include in skill-based healthful eating programs in secondary schools. Methods: Fifty-one food experts including home economics educators, chefs, nutritionists and dietitians, community educators, homemakers, and young people were recruited by invitation, mail, and advertising. Data were…

Development and validation of 26-item dysfunctional attitude scale.

Science.gov (United States)

Ebrahimi, Amrollah; Samouei, Rahele; Mousavii, Sayyed Ghafour; Bornamanesh, Ali Reza

2013-06-01

Dysfunctional Attitude Scale is one of the most common instruments used to assess cognitive vulnerability. This study aimed to develop and validate a short form of Dysfunctional Attitude Scale appropriate for an Iranian clinical population. Participants were 160 psychiatric patients from medical centers affiliated with Isfahan Medical University, as well as 160 non-patients. Research instruments were clinical interviews based on the Diagnostic and Statistical Manual-IV-TR, Dysfunctional Attitude Scale and General Heath Questionnaire (GHQ-28). Data was analyzed using multicorrelation calculations and factor analysis. Based on the results of factor analysis and item-total correlation, 14 items were judged candidates for omission. Analysis of the 26-item Dysfunctional Attitude Scale (DAS-26) revealed a Cronbach's alpha of 0.92. Evidence for the concurrent criterion validity was obtained through calculating the correlation between the Dysfunctional Attitude Scale and psychiatric diagnosis (r = 0.55), GHQ -28 (r = 0.56) and somatization, anxiety, social dysfunction, and depression subscales (0.45,0.53,0.48, and 0.57, respectively). Factor analysis deemed a four-factor structure the best. The factors were labeled as success-perfectionism, need for approval, need for satisfying others, and vulnerability-performance evaluation. The results showed that the Iranian version of the Dysfunctional Attitude Scale (DAS-26) bears satisfactory psychometric properties suggesting that this cognitive instrument is appropriate for use in an Iranian cultural context. Copyright © 2012 Wiley Publishing Asia Pty Ltd.

42 CFR 137.138 - Once the Indian Tribe's final offer has been accepted or deemed accepted by operation of law...

Science.gov (United States)

2010-10-01

... accepted or deemed accepted by operation of law, what is the next step? 137.138 Section 137.138 Public... final offer has been accepted or deemed accepted by operation of law, what is the next step? After the... the acceptance or the deemed acceptance. Rejection of Final Offers ...

Deemed consent: Assessing the new opt-out approach to organ procurement in Wales

DEFF Research Database (Denmark)

Albertsen, Andreas

2018-01-01

In December 2015, Wales became the first country in the UK to move away from an opt-in system in organ procurement. The new legislation introduces the concept of deemed consent whereby a person who neither opt in nor opt out is deemed to have consented to donation. The data released by the National...... Health Service (NHS) in July 2017 provide an excellent opportunity to assess this legislation in light of concerns that it would decrease procurement rates for living and deceased donation, as well as sparking an increase in family refusals. None of these concerns have come to pass, with Wales...

9 CFR 325.2 - Parcel post and ferries deemed carriers.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Parcel post and ferries deemed carriers. 325.2 Section 325.2 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF... to transportation by ferry of any products loaded on a truck or other vehicle, or otherwise moved by...

Overview of Classical Test Theory and Item Response Theory for Quantitative Assessment of Items in Developing Patient-Reported Outcome Measures

Science.gov (United States)

Cappelleri, Joseph C.; Lundy, J. Jason; Hays, Ron D.

2014-01-01

Introduction The U.S. Food and Drug Administration’s patient-reported outcome (PRO) guidance document defines content validity as “the extent to which the instrument measures the concept of interest” (FDA, 2009, p. 12). “Construct validity is now generally viewed as a unifying form of validity for psychological measurements, subsuming both content and criterion validity” (Strauss & Smith, 2009, p. 7). Hence both qualitative and quantitative information are essential in evaluating the validity of measures. Methods We review classical test theory and item response theory approaches to evaluating PRO measures including frequency of responses to each category of the items in a multi-item scale, the distribution of scale scores, floor and ceiling effects, the relationship between item response options and the total score, and the extent to which hypothesized “difficulty” (severity) order of items is represented by observed responses. Conclusion Classical test theory and item response theory can be useful in providing a quantitative assessment of items and scales during the content validity phase of patient-reported outcome measures. Depending on the particular type of measure and the specific circumstances, either one or both approaches should be considered to help maximize the content validity of PRO measures. PMID:24811753

A survey of anatomical items relevant to the practice of rheumatology: upper extremity, head, neck, spine, and general concepts.

Science.gov (United States)

Villaseñor-Ovies, Pablo; Navarro-Zarza, José Eduardo; Saavedra, Miguel Ángel; Hernández-Díaz, Cristina; Canoso, Juan J; Biundo, Joseph J; Kalish, Robert A; de Toro Santos, Francisco Javier; McGonagle, Dennis; Carette, Simon; Alvarez-Nemegyei, José

2016-12-01

This study aimed to identify the anatomical items of the upper extremity and spine that are potentially relevant to the practice of rheumatology. Ten rheumatologists interested in clinical anatomy who published, taught, and/or participated as active members of Clinical Anatomy Interest groups (six seniors, four juniors), participated in a one-round relevance Delphi exercise. An initial, 560-item list that included 45 (8.0 %) general concepts items; 138 (24.8 %) hand items; 100 (17.8 %) forearm and elbow items; 147 (26.2 %) shoulder items; and 130 (23.2 %) head, neck, and spine items was compiled by 5 of the participants. Each item was graded for importance with a Likert scale from 1 (not important) to 5 (very important). Thus, scores could range from 10 (1 × 10) to 50 (5 × 10). An item score of ≥40 was considered most relevant to competent practice as a rheumatologist. Mean item Likert scores ranged from 2.2 ± 0.5 to 4.6 ± 0.7. A total of 115 (20.5 %) of the 560 initial items reached relevance. Broken down by categories, this final relevant item list was composed by 7 (6.1 %) general concepts items; 32 (27.8 %) hand items; 20 (17.4 %) forearm and elbow items; 33 (28.7 %) shoulder items; and 23 (17.6 %) head, neck, and spine items. In this Delphi exercise, a group of practicing academic rheumatologists with an interest in clinical anatomy compiled a list of anatomical items that were deemed important to the practice of rheumatology. We suggest these items be considered curricular priorities when training rheumatology fellows in clinical anatomy skills and in programs of continuing rheumatology education.

Distribution and Availability of Essential Tuberculosis Diagnostic Items in Amhara Region, Ethiopia.

Science.gov (United States)

Sinishaw, Mulusew Alemneh; Gebregergs, Gebremedhin Berhe; Shiferaw, Melashu Balew

2015-01-01

Adequate supplies of tuberculosis laboratory reagents and consumables are necessary for tuberculosis diagnosis and monitoring of treatment response. This study assessed the distribution and stock levels of laboratory commodities used in tuberculosis control in health centers of Amhara region, Ethiopia. A cross-sectional study was conducted in 82 health centers, among 801, providing sputum microscopy services. Stock levels were calculated, and distribution of reagents and consumables assessed. Thirty three (40.2%) health centers were under stocked for at least one of the key items for tuberculosis diagnosis at the time of visit. Fifteen (18.3%) health centers had no stocks of at least one of the key items (methylene blue (11%), carbol fuchsin (11%), acid alcohol (8.5%) and sputum cups (3.7%)). Of the 82 health centers, 77 (93.9%) did not fulfill the criteria for effective distribution of tuberculosis laboratory reagents and consumables. There were many health centers that had no or only low stocks of key tuberculosis laboratory reagents and consumables as a result of ineffective distribution system. It is necessary to strengthen supply chain management to ensure uninterrupted TB diagnostic service.

Adaptation to Cognitive Context and Item Information in the Medial Temporal Lobes

Science.gov (United States)

Diana, Rachel A.; Yonelinas, Andrew P.; Ranganath, Charan

2012-01-01

The medial temporal lobes (MTL) play an essential role in episodic memory, and accumulating evidence indicates that two MTL subregions--the perirhinal (PRc) and parahippocampal (PHc) cortices--might have different functions. According to the binding of item and context theory ( [16] and [21]), PRc is involved in processing item information, the…

42 CFR 423.165 - Compliance deemed on the basis of accreditation.

Science.gov (United States)

2010-10-01

... 42 Public Health 3 2010-10-01 2010-10-01 false Compliance deemed on the basis of accreditation. 423.165 Section 423.165 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICARE PROGRAM VOLUNTARY MEDICARE PRESCRIPTION DRUG BENEFIT Cost...

Item-focussed Trees for the Identification of Items in Differential Item Functioning.

Science.gov (United States)

Tutz, Gerhard; Berger, Moritz

2016-09-01

A novel method for the identification of differential item functioning (DIF) by means of recursive partitioning techniques is proposed. We assume an extension of the Rasch model that allows for DIF being induced by an arbitrary number of covariates for each item. Recursive partitioning on the item level results in one tree for each item and leads to simultaneous selection of items and variables that induce DIF. For each item, it is possible to detect groups of subjects with different item difficulties, defined by combinations of characteristics that are not pre-specified. The way a DIF item is determined by covariates is visualized in a small tree and therefore easily accessible. An algorithm is proposed that is based on permutation tests. Various simulation studies, including the comparison with traditional approaches to identify items with DIF, show the applicability and the competitive performance of the method. Two applications illustrate the usefulness and the advantages of the new method.

Re-evaluating a vision-related quality of life questionnaire with item response theory (IRT and differential item functioning (DIF analyses

Directory of Open Access Journals (Sweden)

Knol Dirk L

2011-09-01

Full Text Available Abstract Background For the Low Vision Quality Of Life questionnaire (LVQOL it is unknown whether the psychometric properties are satisfactory when an item response theory (IRT perspective is considered. This study evaluates some essential psychometric properties of the LVQOL questionnaire in an IRT model, and investigates differential item functioning (DIF. Methods Cross-sectional data were used from an observational study among visually-impaired patients (n = 296. Calibration was performed for every dimension of the LVQOL in the graded response model. Item goodness-of-fit was assessed with the S-X2-test. DIF was assessed on relevant background variables (i.e. age, gender, visual acuity, eye condition, rehabilitation type and administration type with likelihood-ratio tests for DIF. The magnitude of DIF was interpreted by assessing the largest difference in expected scores between subgroups. Measurement precision was assessed by presenting test information curves; reliability with the index of subject separation. Results All items of the LVQOL dimensions fitted the model. There was significant DIF on several items. For two items the maximum difference between expected scores exceeded one point, and DIF was found on multiple relevant background variables. Item 1 'Vision in general' from the "Adjustment" dimension and item 24 'Using tools' from the "Reading and fine work" dimension were removed. Test information was highest for the "Reading and fine work" dimension. Indices for subject separation ranged from 0.83 to 0.94. Conclusions The items of the LVQOL showed satisfactory item fit to the graded response model; however, two items were removed because of DIF. The adapted LVQOL with 21 items is DIF-free and therefore seems highly appropriate for use in heterogeneous populations of visually impaired patients.

42 CFR 102.51 - Documentation a smallpox vaccine recipient must submit to be deemed eligible by the Secretary.

Science.gov (United States)

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Documentation a smallpox vaccine recipient must..., DEPARTMENT OF HEALTH AND HUMAN SERVICES VACCINES SMALLPOX COMPENSATION PROGRAM Required Documentation To Be Deemed Eligible § 102.51 Documentation a smallpox vaccine recipient must submit to be deemed eligible by...

Evaluating an Automated Number Series Item Generator Using Linear Logistic Test Models

Directory of Open Access Journals (Sweden)

Bao Sheng Loe

2018-04-01

Full Text Available This study investigates the item properties of a newly developed Automatic Number Series Item Generator (ANSIG. The foundation of the ANSIG is based on five hypothesised cognitive operators. Thirteen item models were developed using the numGen R package and eleven were evaluated in this study. The 16-item ICAR (International Cognitive Ability Resource1 short form ability test was used to evaluate construct validity. The Rasch Model and two Linear Logistic Test Model(s (LLTM were employed to estimate and predict the item parameters. Results indicate that a single factor determines the performance on tests composed of items generated by the ANSIG. Under the LLTM approach, all the cognitive operators were significant predictors of item difficulty. Moderate to high correlations were evident between the number series items and the ICAR test scores, with high correlation found for the ICAR Letter-Numeric-Series type items, suggesting adequate nomothetic span. Extended cognitive research is, nevertheless, essential for the automatic generation of an item pool with predictable psychometric properties.

26 CFR 1.1033(c)-1 - Disposition of excess property within irrigation project deemed to be involuntary conversion.

Science.gov (United States)

2010-04-01

... project deemed to be involuntary conversion. 1.1033(c)-1 Section 1.1033(c)-1 Internal Revenue INTERNAL... Nontaxable Exchanges § 1.1033(c)-1 Disposition of excess property within irrigation project deemed to be... project or division shall be treated as an involuntary conversion to which the provisions of section 1033...

Item validity vs. item discrimination index: a redundancy?

Science.gov (United States)

Panjaitan, R. L.; Irawati, R.; Sujana, A.; Hanifah, N.; Djuanda, D.

2018-03-01

In several literatures about evaluation and test analysis, it is common to find that there are calculations of item validity as well as item discrimination index (D) with different formula for each. Meanwhile, other resources said that item discrimination index could be obtained by calculating the correlation between the testee’s score in a particular item and the testee’s score on the overall test, which is actually the same concept as item validity. Some research reports, especially undergraduate theses tend to include both item validity and item discrimination index in the instrument analysis. It seems that these concepts might overlap for both reflect the test quality on measuring the examinees’ ability. In this paper, examples of some results of data processing on item validity and item discrimination index were compared. It would be discussed whether item validity and item discrimination index can be represented by one of them only or it should be better to present both calculations for simple test analysis, especially in undergraduate theses where test analyses were included.

Procurement Engineering Process for Commercial Grade Item Dedication

International Nuclear Information System (INIS)

Park, Jong-Hyuck; Park, Jong-Eun; Kwak, Tack-Hun; Yoo, Keun-Bae; Lee, Sang-Guk; Hong, Sung-Yull

2006-01-01

Procurement Engineering Process for commercial grade item dedication plays an increasingly important role in operation management of Korea Nuclear Power Plants. The purpose of the Procurement Engineering Process is the provision and assurance of a high quality and quantity of spare, replacement, retrofit and new parts and equipment while maximizing plant availability, minimizing downtime due to parts unavailability and providing reasonable overall program and inventory cost. In this paper, we will review the overview requirements, responsibilities and the process for demonstrating with reasonable assurance that a procured item for potential nuclear safety related services or other essential plant service is adequate with reasonable assurance for its application. This paper does not cover the details of technical evaluation, selecting critical characteristics, selecting acceptance methods, performing failure modes and effects analysis, performing source surveillance, performing quality surveys, performing special tests and inspections, and the other aspects of effective Procurement Engineering and Commercial Grade Item Dedication. The main contribution of this paper is to provide the provision of an overview of Procurement Engineering Process for commercial grade item

26 CFR 1.408(q)-1 - Deemed IRAs in qualified employer plans.

Science.gov (United States)

2010-04-01

... (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Pension, Profit-Sharing, Stock Bonus Plans, Etc. § 1.408(q)-1... restrictions that a trustee, custodian, or insurance company is permitted to impose on distributions from... accounts of any of the deemed IRAs is invested in life insurance contracts, regardless of whether the...

A Delphi study among internal medicine clinicians to determine which therapeutic information is essential to record in a medical record.

Science.gov (United States)

van Unen, Robert J; Tichelaar, Jelle; Nanayakkara, Prabath W B; van Agtmael, Michiel A; Richir, Milan C; de Vries, Theo P G M

2015-12-01

Several studies have demonstrated that using a template for recording general and diagnostic information in the medical record (MR) improves the completeness of MR documentation, communication between doctors, and performance of doctors. However, little is known about how therapeutic information should be structured in the MR. The aim of this study was to investigate which specific therapeutic information registrars and consultants in internal medicine consider essential to record in the MR. Therefore, we carried out a 2-round Internet Delphi study. Fifty-nine items were assessed on a 5-point scale; an item was considered important if ≥ 80% of the respondents awarded it a score of 4 or 5. In total, 26 registrars and 30 consultants in internal medicine completed both rounds of the study. Overall, they considered it essential to include information about 11 items in the MR. Subgroup analyses revealed that the registrars considered 8 additional items essential, whereas the consultants considered 1 additional item essential to record. Study findings can be used as a starting point to develop a structured section of the MR for therapeutic information for both paper and electronic MRs. This section should contain at least 11 items considered essential by registrars and clinical consultants in internal medicine. © 2015, The American College of Clinical Pharmacology.

INTERDEPENDENCE OF COST AND QUALITY OF ITEMS OF REAL ESTATE

Directory of Open Access Journals (Sweden)

Lukmanova Inessa Galeevna

2012-10-01

Calculation of reduction of the overall cost of the real estate item that has improved quality indicators in comparison with the overall cost of the real estate item of satisfactory quality, taken as a benchmark, is made. The nature of interrelation between the quality of building works and maintenance expenses is provided. The overall cost of the item increases alongside with the increase of its quality, therefore the pre-set quality indicator should be defined by taking account of the market conditions, rates charged for building works and payable by buyers, and the amount of building works that sell at a higher price. The indicator of the overall cost of the item of real estate, if forthcoming operational expenses are taken into account, i.e. calculated for the course of the overall life cycle of the item, is essential if the investor is going to maintain the building. Investors often act as sellers of completed buildings; therefore, the product price set at the time when it is offered for sale is of particular importance.

Using automatic item generation to create multiple-choice test items.

Science.gov (United States)

Gierl, Mark J; Lai, Hollis; Turner, Simon R

2012-08-01

Many tests of medical knowledge, from the undergraduate level to the level of certification and licensure, contain multiple-choice items. Although these are efficient in measuring examinees' knowledge and skills across diverse content areas, multiple-choice items are time-consuming and expensive to create. Changes in student assessment brought about by new forms of computer-based testing have created the demand for large numbers of multiple-choice items. Our current approaches to item development cannot meet this demand. We present a methodology for developing multiple-choice items based on automatic item generation (AIG) concepts and procedures. We describe a three-stage approach to AIG and we illustrate this approach by generating multiple-choice items for a medical licensure test in the content area of surgery. To generate multiple-choice items, our method requires a three-stage process. Firstly, a cognitive model is created by content specialists. Secondly, item models are developed using the content from the cognitive model. Thirdly, items are generated from the item models using computer software. Using this methodology, we generated 1248 multiple-choice items from one item model. Automatic item generation is a process that involves using models to generate items using computer technology. With our method, content specialists identify and structure the content for the test items, and computer technology systematically combines the content to generate new test items. By combining these outcomes, items can be generated automatically. © Blackwell Publishing Ltd 2012.

26 CFR 1.996-1 - Rules for actual distributions and certain deemed distributions.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 10 2010-04-01 2010-04-01 false Rules for actual distributions and certain deemed distributions. 1.996-1 Section 1.996-1 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Domestic International Sales Corporations...

75 FR 7552 - Exclusion of Certain Military Pay From Deemed Income and Resources

Science.gov (United States)

2010-02-22

..., or visit our Internet site, Social Security Online, at http://www.socialsecurity.gov . SUPPLEMENTARY... SOCIAL SECURITY ADMINISTRATION 20 CFR Part 416 [Docket No. SSA-2008-0051] RIN 0960-AF97 Exclusion of Certain Military Pay From Deemed Income and Resources AGENCY: Social Security Administration...

Human resource management in the delivery of postal items

Directory of Open Access Journals (Sweden)

Kujačić Momčilo D.

2015-01-01

Full Text Available Delivery of postal items is the last phase in the postal conveyance process. This phase involved up to 57% in total costs of postal items conveyance. In order to reduce the costs of delivery phase, postal organizations apply different methods and techniques. Legal and technological regulations, various restrictions regarding the selection and deployment of employees influence the choice of appropriate methods. Also, the principle of availability of the universal postal service is an essential factor in defining the optimal model. In this paper, the model for assessing and planning of the number of employees in the delivery service observed postal operator has been proposed, with respect to the principles of productivity and accessibility constraints of the universal postal service. This paper will analyze the impact of daily fluctuations in the number of full-time employees and the possibility of hiring a part-time workers in the days with increased traffic volume in the delivery of items, when usually the items from large customers are delivered.

The Role of Item Models in Automatic Item Generation

Science.gov (United States)

Gierl, Mark J.; Lai, Hollis

2012-01-01

Automatic item generation represents a relatively new but rapidly evolving research area where cognitive and psychometric theories are used to produce tests that include items generated using computer technology. Automatic item generation requires two steps. First, test development specialists create item models, which are comparable to templates…

Assessing item fit for unidimensional item response theory models using residuals from estimated item response functions.

Science.gov (United States)

Haberman, Shelby J; Sinharay, Sandip; Chon, Kyong Hee

2013-07-01

Residual analysis (e.g. Hambleton & Swaminathan, Item response theory: principles and applications, Kluwer Academic, Boston, 1985; Hambleton, Swaminathan, & Rogers, Fundamentals of item response theory, Sage, Newbury Park, 1991) is a popular method to assess fit of item response theory (IRT) models. We suggest a form of residual analysis that may be applied to assess item fit for unidimensional IRT models. The residual analysis consists of a comparison of the maximum-likelihood estimate of the item characteristic curve with an alternative ratio estimate of the item characteristic curve. The large sample distribution of the residual is proved to be standardized normal when the IRT model fits the data. We compare the performance of our suggested residual to the standardized residual of Hambleton et al. (Fundamentals of item response theory, Sage, Newbury Park, 1991) in a detailed simulation study. We then calculate our suggested residuals using data from an operational test. The residuals appear to be useful in assessing the item fit for unidimensional IRT models.

Problems with the factor analysis of items: Solutions based on item response theory and item parcelling

Directory of Open Access Journals (Sweden)

Gideon P. De Bruin

2004-10-01

Full Text Available The factor analysis of items often produces spurious results in the sense that unidimensional scales appear multidimensional. This may be ascribed to failure in meeting the assumptions of linearity and normality on which factor analysis is based. Item response theory is explicitly designed for the modelling of the non-linear relations between ordinal variables and provides a strong alternative to the factor analysis of items. Items may also be combined in parcels that are more likely to satisfy the assumptions of factor analysis than do the items. The use of the Rasch rating scale model and the factor analysis of parcels is illustrated with data obtained with the Locus of Control Inventory. The results of these analyses are compared with the results obtained through the factor analysis of items. It is shown that the Rasch rating scale model and the factoring of parcels produce superior results to the factor analysis of items. Recommendations for the analysis of scales are made. Opsomming Die faktorontleding van items lewer dikwels misleidende resultate op, veral in die opsig dat eendimensionele skale as meerdimensioneel voorkom. Hierdie resultate kan dikwels daaraan toegeskryf word dat daar nie aan die aannames van lineariteit en normaliteit waarop faktorontleding berus, voldoen word nie. Itemresponsteorie, wat eksplisiet vir die modellering van die nie-liniêre verbande tussen ordinale items ontwerp is, bied ’n aantreklike alternatief vir die faktorontleding van items. Items kan ook in pakkies gegroepeer word wat meer waarskynlik aan die aannames van faktorontleding voldoen as individuele items. Die gebruik van die Rasch beoordelingskaalmodel en die faktorontleding van pakkies word aan die hand van data wat met die Lokus van Beheervraelys verkry is, gedemonstreer. Die resultate van hierdie ontledings word vergelyk met die resultate wat deur ‘n faktorontleding van die individuele items verkry is. Die resultate dui daarop dat die Rasch

Item information and discrimination functions for trinary PCM items

NARCIS (Netherlands)

Akkermans, Wies; Muraki, Eiji

1997-01-01

For trinary partial credit items the shape of the item information and the item discrimination function is examined in relation to the item parameters. In particular, it is shown that these functions are unimodal if δ2 – δ1 < 4 ln 2 and bimodal otherwise. The locations and values of the maxima are

Navy Supply: Economic Order Quantity and Item Essentiality Need More Consideration.

Science.gov (United States)

1988-01-06

Risk and Essentiality Need To compute safety levels, the Navy uses a set of mathematical formulas to Be Recognized that considers such factors as demand...OderQtia~tit ma Safty Lvel -" " Chapter 2 EOQ Principle Not Followed To reduce the purchase workload, the Navy adopted a policy in fiscal year 1985 that...than a minimum of 1 year’s supply. Navy Policy Overrides The EoQ principle is a mathematical technique for determining the pur- chase quantity that will

42 CFR 137.137 - If the 45 day review period or extension thereto, has expired, and the Tribes offer is deemed...

Science.gov (United States)

2010-10-01

..., has expired, and the Tribes offer is deemed accepted by operation of law, are there any exceptions to... SERVICES INDIAN HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES TRIBAL SELF-GOVERNANCE Final Offer § 137.137 If the 45 day review period or extension thereto, has expired, and the Tribes offer is deemed...

Deemed consent: assessing the new opt-out approach to organ procurement in Wales.

Science.gov (United States)

Albertsen, Andreas

2018-05-01

In December 2015, Wales became the first country in the UK to move away from an opt-in system in organ procurement. The new legislation introduces the concept of deemed consent whereby a person who neither opt in nor opt out is deemed to have consented to donation. The data released by the National Health Service (NHS) in July 2017 provide an excellent opportunity to assess this legislation in light of concerns that it would decrease procurement rates for living and deceased donation, as well as sparking an increase in family refusals. None of these concerns have come to pass, with Wales experiencing more registered donors, fewer family refusals and more living donations. However, as the number of actual donors has dropped slightly from a high level, the situation must be monitored closely in the years to come. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Item level diagnostics and model - data fit in item response theory ...

African Journals Online (AJOL)

Item response theory (IRT) is a framework for modeling and analyzing item response data. Item-level modeling gives IRT advantages over classical test theory. The fit of an item score pattern to an item response theory (IRT) models is a necessary condition that must be assessed for further use of item and models that best fit ...

Overview of classical test theory and item response theory for the quantitative assessment of items in developing patient-reported outcomes measures.

Science.gov (United States)

Cappelleri, Joseph C; Jason Lundy, J; Hays, Ron D

2014-05-01

The US Food and Drug Administration's guidance for industry document on patient-reported outcomes (PRO) defines content validity as "the extent to which the instrument measures the concept of interest" (FDA, 2009, p. 12). According to Strauss and Smith (2009), construct validity "is now generally viewed as a unifying form of validity for psychological measurements, subsuming both content and criterion validity" (p. 7). Hence, both qualitative and quantitative information are essential in evaluating the validity of measures. We review classical test theory and item response theory (IRT) approaches to evaluating PRO measures, including frequency of responses to each category of the items in a multi-item scale, the distribution of scale scores, floor and ceiling effects, the relationship between item response options and the total score, and the extent to which hypothesized "difficulty" (severity) order of items is represented by observed responses. If a researcher has few qualitative data and wants to get preliminary information about the content validity of the instrument, then descriptive assessments using classical test theory should be the first step. As the sample size grows during subsequent stages of instrument development, confidence in the numerical estimates from Rasch and other IRT models (as well as those of classical test theory) would also grow. Classical test theory and IRT can be useful in providing a quantitative assessment of items and scales during the content-validity phase of PRO-measure development. Depending on the particular type of measure and the specific circumstances, the classical test theory and/or the IRT should be considered to help maximize the content validity of PRO measures. Copyright © 2014 Elsevier HS Journals, Inc. All rights reserved.

Optimal pricing and marketing planning for deteriorating items.

Science.gov (United States)

Moosavi Tabatabaei, Seyed Reza; Sadjadi, Seyed Jafar; Makui, Ahmad

2017-01-01

Optimal pricing and marketing planning plays an essential role in production decisions on deteriorating items. This paper presents a mathematical model for a three-level supply chain, which includes one producer, one distributor and one retailer. The proposed study considers the production of a deteriorating item where demand is influenced by price, marketing expenditure, quality of product and after-sales service expenditures. The proposed model is formulated as a geometric programming with 5 degrees of difficulty and the problem is solved using the recent advances in optimization techniques. The study is supported by several numerical examples and sensitivity analysis is performed to analyze the effects of the changes in different parameters on the optimal solution. The preliminary results indicate that with the change in parameters influencing on demand, inventory holding, inventory deteriorating and set-up costs change and also significantly affect total revenue.

A Bifactor Multidimensional Item Response Theory Model for Differential Item Functioning Analysis on Testlet-Based Items

Science.gov (United States)

Fukuhara, Hirotaka; Kamata, Akihito

2011-01-01

A differential item functioning (DIF) detection method for testlet-based data was proposed and evaluated in this study. The proposed DIF model is an extension of a bifactor multidimensional item response theory (MIRT) model for testlets. Unlike traditional item response theory (IRT) DIF models, the proposed model takes testlet effects into…

Gender-Based Differential Item Performance in Mathematics Achievement Items.

Science.gov (United States)

Doolittle, Allen E.; Cleary, T. Anne

1987-01-01

Eight randomly equivalent samples of high school seniors were each given a unique form of the ACT Assessment Mathematics Usage Test (ACTM). Signed measures of differential item performance (DIP) were obtained for each item in the eight ACTM forms. DIP estimates were analyzed and a significant item category effect was found. (Author/LMO)

STARD 2015: An Updated List of Essential Items for Reporting Diagnostic Accuracy Studies

NARCIS (Netherlands)

Bossuyt, P.M.; Reitsma, J.B.; Bruns, D.E.; Gatsonis, C.A.; Glasziou, P.P.; Irwig, L.; Lijmer, J.G.; Moher, D.; Rennie, D.; de Vet, H.C.W.; Kressel, H.Y.; Rifai, N.; Golub, R.M.; Altman, D.G.; Hooft, L.; Korevaar, D.A.; Cohen, J.F.

2015-01-01

Incomplete reporting has been identified as a major source of avoidable waste in biomedical research. Essential information is often not provided in study reports, impeding the identification, critical appraisal, and replication of studies. To improve the quality of reporting of diagnostic accuracy

Evaluation of psychometric properties and differential item functioning of 8-item Child Perceptions Questionnaires using item response theory.

Science.gov (United States)

Yau, David T W; Wong, May C M; Lam, K F; McGrath, Colman

2015-08-19

Four-factor structure of the two 8-item short forms of Child Perceptions Questionnaire CPQ11-14 (RSF:8 and ISF:8) has been confirmed. However, the sum scores are typically reported in practice as a proxy of Oral health-related Quality of Life (OHRQoL), which implied a unidimensional structure. This study first assessed the unidimensionality of 8-item short forms of CPQ11-14. Item response theory (IRT) was employed to offer an alternative and complementary approach of validation and to overcome the limitations of classical test theory assumptions. A random sample of 649 12-year-old school children in Hong Kong was analyzed. Unidimensionality of the scale was tested by confirmatory factor analysis (CFA), principle component analysis (PCA) and local dependency (LD) statistic. Graded response model was fitted to the data. Contribution of each item to the scale was assessed by item information function (IIF). Reliability of the scale was assessed by test information function (TIF). Differential item functioning (DIF) across gender was identified by Wald test and expected score functions. Both CPQ11-14 RSF:8 and ISF:8 did not deviate much from the unidimensionality assumption. Results from CFA indicated acceptable fit of the one-factor model. PCA indicated that the first principle component explained >30 % of the total variation with high factor loadings for both RSF:8 and ISF:8. Almost all LD statistic items suggesting little contribution of information to the scale and item removal caused little practical impact. Comparing the TIFs, RSF:8 showed slightly better information than ISF:8. In addition to oral symptoms items, the item "Concerned with what other people think" demonstrated a uniform DIF (p Items related to oral symptoms were not informative to OHRQoL and deletion of these items is suggested. The impact of DIF across gender on the overall score was minimal. CPQ11-14 RSF:8 performed slightly better than ISF:8 in measurement precision. The 6-item short forms

NFC based Equipment Qualification Management (NEQM) system preventing counterfeit and fraudulent item

Energy Technology Data Exchange (ETDEWEB)

Chang, C.K., E-mail: ckchang@kings.ac.kr [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of); Lee, K.J., E-mail: klee@khu.ac.kr [Kyung Hee Univ., Seoul (Korea, Republic of)

2014-07-01

Qualification of equipment essential to safety in nuclear power plants (NPPs) ensures its capability to perform designated safety functions on demand under postulated service conditions. However, a number of incidents identified by the NRC since 1980s catalysed the US nuclear industry to adopt standard precautions to guard against counterfeit items. The purpose of this paper is to suggest the NFC (Near Field Communication) based equipment qualification management system preventing counterfeit and fraudulent items. The NEQM (NFC based Equipment Qualification Management) system work with the support of legacy systems such as PMS (Procurement Management System) and FMS (Facility management System). (author)

NFC based Equipment Qualification Management (NEQM) system preventing counterfeit and fraudulent item

International Nuclear Information System (INIS)

Chang, C.K.; Lee, K.J.

2014-01-01

Qualification of equipment essential to safety in nuclear power plants (NPPs) ensures its capability to perform designated safety functions on demand under postulated service conditions. However, a number of incidents identified by the NRC since 1980s catalysed the US nuclear industry to adopt standard precautions to guard against counterfeit items. The purpose of this paper is to suggest the NFC (Near Field Communication) based equipment qualification management system preventing counterfeit and fraudulent items. The NEQM (NFC based Equipment Qualification Management) system work with the support of legacy systems such as PMS (Procurement Management System) and FMS (Facility management System). (author)

Optimal pricing and marketing planning for deteriorating items.

Directory of Open Access Journals (Sweden)

Seyed Reza Moosavi Tabatabaei

Full Text Available Optimal pricing and marketing planning plays an essential role in production decisions on deteriorating items. This paper presents a mathematical model for a three-level supply chain, which includes one producer, one distributor and one retailer. The proposed study considers the production of a deteriorating item where demand is influenced by price, marketing expenditure, quality of product and after-sales service expenditures. The proposed model is formulated as a geometric programming with 5 degrees of difficulty and the problem is solved using the recent advances in optimization techniques. The study is supported by several numerical examples and sensitivity analysis is performed to analyze the effects of the changes in different parameters on the optimal solution. The preliminary results indicate that with the change in parameters influencing on demand, inventory holding, inventory deteriorating and set-up costs change and also significantly affect total revenue.

Optimal pricing and marketing planning for deteriorating items

Science.gov (United States)

Moosavi Tabatabaei, Seyed Reza; Sadjadi, Seyed Jafar; Makui, Ahmad

2017-01-01

Optimal pricing and marketing planning plays an essential role in production decisions on deteriorating items. This paper presents a mathematical model for a three-level supply chain, which includes one producer, one distributor and one retailer. The proposed study considers the production of a deteriorating item where demand is influenced by price, marketing expenditure, quality of product and after-sales service expenditures. The proposed model is formulated as a geometric programming with 5 degrees of difficulty and the problem is solved using the recent advances in optimization techniques. The study is supported by several numerical examples and sensitivity analysis is performed to analyze the effects of the changes in different parameters on the optimal solution. The preliminary results indicate that with the change in parameters influencing on demand, inventory holding, inventory deteriorating and set-up costs change and also significantly affect total revenue. PMID:28306750

42 CFR 423.171 - Procedures for approval of accreditation as a basis for deeming compliance.

Science.gov (United States)

2010-10-01

... BENEFIT Cost Control and Quality Improvement Requirements § 423.171 Procedures for approval of... 42 Public Health 3 2010-10-01 2010-10-01 false Procedures for approval of accreditation as a basis for deeming compliance. 423.171 Section 423.171 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES...

Evaluation of item candidates for a diabetic retinopathy quality of life item bank.

Science.gov (United States)

Fenwick, Eva K; Pesudovs, Konrad; Khadka, Jyoti; Rees, Gwyn; Wong, Tien Y; Lamoureux, Ecosse L

2013-09-01

We are developing an item bank assessing the impact of diabetic retinopathy (DR) on quality of life (QoL) using a rigorous multi-staged process combining qualitative and quantitative methods. We describe here the first two qualitative phases: content development and item evaluation. After a comprehensive literature review, items were generated from four sources: (1) 34 previously validated patient-reported outcome measures; (2) five published qualitative articles; (3) eight focus groups and 18 semi-structured interviews with 57 DR patients; and (4) seven semi-structured interviews with diabetes or ophthalmic experts. Items were then evaluated during 3 stages, namely binning (grouping) and winnowing (reduction) based on key criteria and panel consensus; development of item stems and response options; and pre-testing of items via cognitive interviews with patients. The content development phase yielded 1,165 unique items across 7 QoL domains. After 3 sessions of binning and winnowing, items were reduced to a minimally representative set (n = 312) across 9 domains of QoL: visual symptoms; ocular surface symptoms; activity limitation; mobility; emotional; health concerns; social; convenience; and economic. After 8 cognitive interviews, 42 items were amended resulting in a final set of 314 items. We have employed a systematic approach to develop items for a DR-specific QoL item bank. The psychometric properties of the nine QoL subscales will be assessed using Rasch analysis. The resulting validated item bank will allow clinicians and researchers to better understand the QoL impact of DR and DR therapies from the patient's perspective.

The role of attention in item-item binding in visual working memory.

Science.gov (United States)

Peterson, Dwight J; Naveh-Benjamin, Moshe

2017-09-01

An important yet unresolved question regarding visual working memory (VWM) relates to whether or not binding processes within VWM require additional attentional resources compared with processing solely the individual components comprising these bindings. Previous findings indicate that binding of surface features (e.g., colored shapes) within VWM is not demanding of resources beyond what is required for single features. However, it is possible that other types of binding, such as the binding of complex, distinct items (e.g., faces and scenes), in VWM may require additional resources. In 3 experiments, we examined VWM item-item binding performance under no load, articulatory suppression, and backward counting using a modified change detection task. Binding performance declined to a greater extent than single-item performance under higher compared with lower levels of concurrent load. The findings from each of these experiments indicate that processing item-item bindings within VWM requires a greater amount of attentional resources compared with single items. These findings also highlight an important distinction between the role of attention in item-item binding within VWM and previous studies of long-term memory (LTM) where declines in single-item and binding test performance are similar under divided attention. The current findings provide novel evidence that the specific type of binding is an important determining factor regarding whether or not VWM binding processes require attention. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Identification of nitrate sources in groundwater using a stable isotope and 3DEEM in a landfill in Northeast China

Energy Technology Data Exchange (ETDEWEB)

Ma, Zhifei [School of Environment, Beijing Normal University, Beijing 100875 (China); State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012 (China); State Environmental Protection Key Laboratory of Simulation and Control of Groundwater Pollution, Chinese Research Academy of Environmental Sciences, Beijing 100012 (China); Yang, Yu; Lian, Xinying [State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012 (China); State Environmental Protection Key Laboratory of Simulation and Control of Groundwater Pollution, Chinese Research Academy of Environmental Sciences, Beijing 100012 (China); Jiang, Yonghai, E-mail: jyhai203@126.com [State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012 (China); State Environmental Protection Key Laboratory of Simulation and Control of Groundwater Pollution, Chinese Research Academy of Environmental Sciences, Beijing 100012 (China); Xi, Beidou [State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012 (China); State Environmental Protection Key Laboratory of Simulation and Control of Groundwater Pollution, Chinese Research Academy of Environmental Sciences, Beijing 100012 (China); Lanzhou Jiaotong University, Gansu 730070 (China); Peng, Xing [School of Environment, Beijing Normal University, Beijing 100875 (China); State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012 (China); State Environmental Protection Key Laboratory of Simulation and Control of Groundwater Pollution, Chinese Research Academy of Environmental Sciences, Beijing 100012 (China); and others

2016-09-01

The groundwater was sampled in a typical landfill area of the Northeast China. Coupled stable isotope and three dimensional excitation–emission matrix (3DEEM) were applied to dentify diffused NO{sub 3}{sup −} inputs in the groundwater in this area. The results indicated that combined with the feature of groundwater hydrochemistry and three-dimensional fluorescence technology can effectively identify the nitrate pollution sources. The nitrate was derived from manure and sewage by δ{sup 15}N and δ{sup 18}O–NO{sub 3}{sup −} values of groundwater in the different periods. The excitation–emission matrix fluorescence spectroscopy was further evidence of groundwater DOM mainly which comes from the landfill. The protein-like was very significant at the sampling points near the landfill (SPNL), but only fulvic acid-like appeared at downstream of the landfill groundwater sampling points (DLGSP) in the study area. Partial denitrification processes helped to attenuate nitrate concentration in anaerobic environment. - Highlights: • We used stable isotope and 3DEEM to evaluate of nitrate sources. • Groundwater hydrochemistry was used to assess groundwater recharge. • The degradation process of organic matters was assessed using 3DEEM in groundwater. • This approach is a effective tool for trace to the nitrate sources in groundwater.

Identification of nitrate sources in groundwater using a stable isotope and 3DEEM in a landfill in Northeast China

International Nuclear Information System (INIS)

Ma, Zhifei; Yang, Yu; Lian, Xinying; Jiang, Yonghai; Xi, Beidou; Peng, Xing

2016-01-01

The groundwater was sampled in a typical landfill area of the Northeast China. Coupled stable isotope and three dimensional excitation–emission matrix (3DEEM) were applied to dentify diffused NO_3"− inputs in the groundwater in this area. The results indicated that combined with the feature of groundwater hydrochemistry and three-dimensional fluorescence technology can effectively identify the nitrate pollution sources. The nitrate was derived from manure and sewage by δ"1"5N and δ"1"8O–NO_3"− values of groundwater in the different periods. The excitation–emission matrix fluorescence spectroscopy was further evidence of groundwater DOM mainly which comes from the landfill. The protein-like was very significant at the sampling points near the landfill (SPNL), but only fulvic acid-like appeared at downstream of the landfill groundwater sampling points (DLGSP) in the study area. Partial denitrification processes helped to attenuate nitrate concentration in anaerobic environment. - Highlights: • We used stable isotope and 3DEEM to evaluate of nitrate sources. • Groundwater hydrochemistry was used to assess groundwater recharge. • The degradation process of organic matters was assessed using 3DEEM in groundwater. • This approach is a effective tool for trace to the nitrate sources in groundwater.

A Comprehensive List of Items to be Included on a Pediatric Drug Monograph.

Science.gov (United States)

Kelly, Lauren E; Ito, Shinya; Woods, David; Nunn, Anthony J; Taketomo, Carol; de Hoog, Matthijs; Offringa, Martin

2017-01-01

Children require special considerations for drug prescribing. Drug information summarized in a formulary containing drug monographs is essential for safe and effective prescribing. Currently, little is known about the information needs of those who prescribe and administer medicines to children. Our primary objective was to identify a list of important and relevant items to be included in a pediatric drug monograph. Following the establishment of an expert steering committee and an environmental scan of adult and pediatric formulary monograph items, 46 participants from 25 countries were invited to complete a 2-round Delphi survey. Questions regarding source of prescribing information and importance of items were recorded. An international consensus meeting to vote on and finalize the items list with the steering committee followed. Pediatric formularies are most commonly the first resource consulted for information on medication used in children by 31 Delphi participants. After the Delphi rounds, 116 items were identified to be included in a comprehensive pediatric drug monograph, including general information, adverse drug reactions, dosages, precautions, drug-drug interactions, formulation, and drug properties. Health care providers identified 116 monograph items as important for prescribing medicines for children by an international consensus-based process. This information will assist in setting standards for the creation of new pediatric drug monographs for international application and for those involved in pediatric formulary development.

Thorndike, Thurstone and Rasch: A Comparison of Their Approaches to Item-Invariant Measurement.

Science.gov (United States)

Englehard, George, Jr.

The methods used by E. L. Thorndike, L. L. Thurstone, and G. Rasch to address issues related to item-invariant measurement and the scoring of individual performance are compared. The analyses highlight the close connection among the three methods, and suggest that progress in measurement theory reflects the movement from essentially ad hoc methods…

Differential item functioning magnitude and impact measures from item response theory models.

Science.gov (United States)

Kleinman, Marjorie; Teresi, Jeanne A

2016-01-01

Measures of magnitude and impact of differential item functioning (DIF) at the item and scale level, respectively are presented and reviewed in this paper. Most measures are based on item response theory models. Magnitude refers to item level effect sizes, whereas impact refers to differences between groups at the scale score level. Reviewed are magnitude measures based on group differences in the expected item scores and impact measures based on differences in the expected scale scores. The similarities among these indices are demonstrated. Various software packages are described that provide magnitude and impact measures, and new software presented that computes all of the available statistics conveniently in one program with explanations of their relationships to one another.

ITEM LEVEL DIAGNOSTICS AND MODEL - DATA FIT IN ITEM ...

African Journals Online (AJOL)

Global Journal

Item response theory (IRT) is a framework for modeling and analyzing item response ... data. Though, there is an argument that the evaluation of fit in IRT modeling has been ... National Council on Measurement in Education ... model data fit should be based on three types of ... prediction should be assessed through the.

Three-dimensional excitation and emission matrix fluorescence (3DEEM) for quick and pseudo-quantitative determination of protein- and humic-like substances in full-scale membrane bioreactor (MBR).

Science.gov (United States)

Jacquin, Céline; Lesage, Geoffroy; Traber, Jacqueline; Pronk, Wouter; Heran, Marc

2017-07-01

The goal of this study is to help filling the research gaps linked to the on-line application of fluorescence spectroscopy in wastewater treatment and data processing tools suitable for rapid correction and extraction of data contained in three-dimensional fluorescence excitation-emission matrix (3DEEM) for real-time studies. 3DEEM was evaluated for direct quantification of Effluent Organic Matter (EfOM) fractions in full-scale MBR bulk supernatant and permeate samples. Principal Component Analysis (PCA) was used to investigate possible correlations between conventional Lowry and Dubois methods, Liquid Chromatography coupled to Organic Carbon and Organic Nitrogen Detection (LC-OCD-OND) and 3DEEM. 3DEEM data were analyzed using the volume of fluorescence (Φ) parameter from the Fluorescence Regional Integration (FRI) method. Two mathematical correlations were established between LC-OCD-OND and 3DEEM data to quantify protein-like and humic-like substances. These correlations were validated with supplementary data from the initial full-scale MBR, and were checked with samples from other systems (a second full-scale MBR, a full-scale conventional activated sludge (CAS) and a laboratory-scale MBR). While humic-like correlation showed satisfactory prediction for a second full-scale MBR and a CAS system, further studies are required for protein-like estimation in other systems. This new approach offers interesting perspectives for the on-line application of 3DEEM for EfOM quantification (protein-like and humic-like substances), fouling prediction and MBR process control. Copyright © 2017 Elsevier Ltd. All rights reserved.

Evolution of a Test Item

Science.gov (United States)

Spaan, Mary

2007-01-01

This article follows the development of test items (see "Language Assessment Quarterly", Volume 3 Issue 1, pp. 71-79 for the article "Test and Item Specifications Development"), beginning with a review of test and item specifications, then proceeding to writing and editing of items, pretesting and analysis, and finally selection of an item for a…

The Spanish version of the Self-Determination Inventory Student Report: application of item response theory to self-determination measurement.

Science.gov (United States)

Mumbardó-Adam, C; Guàrdia-Olmos, J; Giné, C; Raley, S K; Shogren, K A

2018-04-01

A new measure of self-determination, the Self-Determination Inventory: Student Report (Spanish version), has recently been adapted and empirically validated in Spanish language. As it is the first instrument intended to measure self-determination in youth with and without disabilities, there is a need to further explore and strengthen its psychometric analysis based on item response patterns. Through item response theory approach, this study examined item observed distributions across the essential characteristics of self-determination. The results demonstrated satisfactory to excellent item functioning patterns across characteristics, particularly within agentic action domains. Increased variability across items was also found within action-control beliefs dimensions, specifically within the self-realisation subdomain. These findings further support the instrument's psychometric properties and outline future research directions. © 2017 MENCAP and International Association of the Scientific Study of Intellectual and Developmental Disabilities and John Wiley & Sons Ltd.

Instructional Topics in Educational Measurement (ITEMS) Module: Using Automated Processes to Generate Test Items

Science.gov (United States)

Gierl, Mark J.; Lai, Hollis

2013-01-01

Changes to the design and development of our educational assessments are resulting in the unprecedented demand for a large and continuous supply of content-specific test items. One way to address this growing demand is with automatic item generation (AIG). AIG is the process of using item models to generate test items with the aid of computer…

A 67-Item Stress Resilience item bank showing high content validity was developed in a psychosomatic sample.

Science.gov (United States)

Obbarius, Nina; Fischer, Felix; Obbarius, Alexander; Nolte, Sandra; Liegl, Gregor; Rose, Matthias

2018-04-10

To develop the first item bank to measure Stress Resilience (SR) in clinical populations. Qualitative item development resulted in an initial pool of 131 items covering a broad theoretical SR concept. These items were tested in n=521 patients at a psychosomatic outpatient clinic. Exploratory and Confirmatory Factor Analysis (CFA), as well as other state-of-the-art item analyses and IRT were used for item evaluation and calibration of the final item bank. Out of the initial item pool of 131 items, we excluded 64 items (54 factor loading .3, 2 non-discriminative Item Response Curves, 4 Differential Item Functioning). The final set of 67 items indicated sufficient model fit in CFA and IRT analyses. Additionally, a 10-item short form with high measurement precision (SE≤.32 in a theta range between -1.8 and +1.5) was derived. Both the SR item bank and the SR short form were highly correlated with an existing static legacy tool (Connor-Davidson Resilience Scale). The final SR item bank and 10-item short form showed good psychometric properties. When further validated, they will be ready to be used within a framework of Computer-Adaptive Tests for a comprehensive assessment of the Stress-Construct. Copyright © 2018. Published by Elsevier Inc.

Teoria da Resposta ao Item Teoria de la respuesta al item Item response theory

Directory of Open Access Journals (Sweden)

Eutalia Aparecida Candido de Araujo

2009-12-01

Full Text Available A preocupação com medidas de traços psicológicos é antiga, sendo que muitos estudos e propostas de métodos foram desenvolvidos no sentido de alcançar este objetivo. Entre os trabalhos propostos, destaca-se a Teoria da Resposta ao Item (TRI que, a princípio, veio completar limitações da Teoria Clássica de Medidas, empregada em larga escala até hoje na medida de traços psicológicos. O ponto principal da TRI é que ela leva em consideração o item particularmente, sem relevar os escores totais; portanto, as conclusões não dependem apenas do teste ou questionário, mas de cada item que o compõe. Este artigo propõe-se a apresentar esta Teoria que revolucionou a teoria de medidas.La preocupación con las medidas de los rasgos psicológicos es antigua y muchos estudios y propuestas de métodos fueron desarrollados para lograr este objetivo. Entre estas propuestas de trabajo se incluye la Teoría de la Respuesta al Ítem (TRI que, en principio, vino a completar las limitaciones de la Teoría Clásica de los Tests, ampliamente utilizada hasta hoy en la medida de los rasgos psicológicos. El punto principal de la TRI es que se tiene en cuenta el punto concreto, sin relevar las puntuaciones totales; por lo tanto, los resultados no sólo dependen de la prueba o cuestionario, sino que de cada ítem que lo compone. En este artículo se propone presentar la Teoría que revolucionó la teoría de medidas.The concern with measures of psychological traits is old and many studies and proposals of methods were developed to achieve this goal. Among these proposed methods highlights the Item Response Theory (IRT that, in principle, came to complete limitations of the Classical Test Theory, which is widely used until nowadays in the measurement of psychological traits. The main point of IRT is that it takes into account the item in particular, not relieving the total scores; therefore, the findings do not only depend on the test or questionnaire

20 CFR 416.1166a - How we deem income to you from your sponsor if you are an alien.

Science.gov (United States)

2010-04-01

... determine your eligibility for SSI benefits beginning with the month in which your disability or blindness... deemed to Mr. Bert and Mr. Davis. Each of the brothers is liable for rent in the boarding house (a...

Computerized Adaptive Test (CAT) Applications and Item Response Theory Models for Polytomous Items

Science.gov (United States)

Aybek, Eren Can; Demirtasli, R. Nukhet

2017-01-01

This article aims to provide a theoretical framework for computerized adaptive tests (CAT) and item response theory models for polytomous items. Besides that, it aims to introduce the simulation and live CAT software to the related researchers. Computerized adaptive test algorithm, assumptions of item response theory models, nominal response…

Language-related differential item functioning between English and German PROMIS Depression items is negligible.

Science.gov (United States)

Fischer, H Felix; Wahl, Inka; Nolte, Sandra; Liegl, Gregor; Brähler, Elmar; Löwe, Bernd; Rose, Matthias

2017-12-01

To investigate differential item functioning (DIF) of PROMIS Depression items between US and German samples we compared data from the US PROMIS calibration sample (n = 780), a German general population survey (n = 2,500) and a German clinical sample (n = 621). DIF was assessed in an ordinal logistic regression framework, with 0.02 as criterion for R 2 -change and 0.096 for Raju's non-compensatory DIF. Item parameters were initially fixed to the PROMIS Depression metric; we used plausible values to account for uncertainty in depression estimates. Only four items showed DIF. Accounting for DIF led to negligible effects for the full item bank as well as a post hoc simulated computer-adaptive test (German general population sample was considerably lower compared to the US reference value of 50. Overall, we found little evidence for language DIF between US and German samples, which could be addressed by either replacing the DIF items by items not showing DIF or by scoring the short form in German samples with the corrected item parameters reported. Copyright © 2016 John Wiley & Sons, Ltd.

Selecting Items for Criterion-Referenced Tests.

Science.gov (United States)

Mellenbergh, Gideon J.; van der Linden, Wim J.

1982-01-01

Three item selection methods for criterion-referenced tests are examined: the classical theory of item difficulty and item-test correlation; the latent trait theory of item characteristic curves; and a decision-theoretic approach for optimal item selection. Item contribution to the standardized expected utility of mastery testing is discussed. (CM)

Geriatric Anxiety Scale: item response theory analysis, differential item functioning, and creation of a ten-item short form (GAS-10).

Science.gov (United States)

Mueller, Anne E; Segal, Daniel L; Gavett, Brandon; Marty, Meghan A; Yochim, Brian; June, Andrea; Coolidge, Frederick L

2015-07-01

The Geriatric Anxiety Scale (GAS; Segal et al. (Segal, D. L., June, A., Payne, M., Coolidge, F. L. and Yochim, B. (2010). Journal of Anxiety Disorders, 24, 709-714. doi:10.1016/j.janxdis.2010.05.002) is a self-report measure of anxiety that was designed to address unique issues associated with anxiety assessment in older adults. This study is the first to use item response theory (IRT) to examine the psychometric properties of a measure of anxiety in older adults. A large sample of older adults (n = 581; mean age = 72.32 years, SD = 7.64 years, range = 60 to 96 years; 64% women; 88% European American) completed the GAS. IRT properties were examined. The presence of differential item functioning (DIF) or measurement bias by age and sex was assessed, and a ten-item short form of the GAS (called the GAS-10) was created. All GAS items had discrimination parameters of 1.07 or greater. Items from the somatic subscale tended to have lower discrimination parameters than items on the cognitive or affective subscales. Two items were flagged for DIF, but the impact of the DIF was negligible. Women scored significantly higher than men on the GAS and its subscales. Participants in the young-old group (60 to 79 years old) scored significantly higher on the cognitive subscale than participants in the old-old group (80 years old and older). Results from the IRT analyses indicated that the GAS and GAS-10 have strong psychometric properties among older adults. We conclude by discussing implications and future research directions.

Asymptotic Standard Errors for Item Response Theory True Score Equating of Polytomous Items

Science.gov (United States)

Cher Wong, Cheow

2015-01-01

Building on previous works by Lord and Ogasawara for dichotomous items, this article proposes an approach to derive the asymptotic standard errors of item response theory true score equating involving polytomous items, for equivalent and nonequivalent groups of examinees. This analytical approach could be used in place of empirical methods like…

5 CFR 842.810 - Elections to be deemed a law enforcement officer for retirement purposes by certain police...

Science.gov (United States)

2010-01-01

... officer for retirement purposes by certain police officers employed by the Metropolitan Washington... § 842.810 Elections to be deemed a law enforcement officer for retirement purposes by certain police... Washington Airports Authority (MWAA) police officers employed as members of the MWAA police force as of...

MIMIC Methods for Assessing Differential Item Functioning in Polytomous Items

Science.gov (United States)

Wang, Wen-Chung; Shih, Ching-Lin

2010-01-01

Three multiple indicators-multiple causes (MIMIC) methods, namely, the standard MIMIC method (M-ST), the MIMIC method with scale purification (M-SP), and the MIMIC method with a pure anchor (M-PA), were developed to assess differential item functioning (DIF) in polytomous items. In a series of simulations, it appeared that all three methods…

Evaluation of Northwest University, Kano Post-UTME Test Items Using Item Response Theory

Science.gov (United States)

Bichi, Ado Abdu; Hafiz, Hadiza; Bello, Samira Abdullahi

2016-01-01

High-stakes testing is used for the purposes of providing results that have important consequences. Validity is the cornerstone upon which all measurement systems are built. This study applied the Item Response Theory principles to analyse Northwest University Kano Post-UTME Economics test items. The developed fifty (50) economics test items was…

Using Differential Item Functioning Procedures to Explore Sources of Item Difficulty and Group Performance Characteristics.

Science.gov (United States)

Scheuneman, Janice Dowd; Gerritz, Kalle

1990-01-01

Differential item functioning (DIF) methodology for revealing sources of item difficulty and performance characteristics of different groups was explored. A total of 150 Scholastic Aptitude Test items and 132 Graduate Record Examination general test items were analyzed. DIF was evaluated for males and females and Blacks and Whites. (SLD)

HIV/AIDS knowledge among men who have sex with men: applying the item response theory.

Science.gov (United States)

Gomes, Raquel Regina de Freitas Magalhães; Batista, José Rodrigues; Ceccato, Maria das Graças Braga; Kerr, Lígia Regina Franco Sansigolo; Guimarães, Mark Drew Crosland

2014-04-01

To evaluate the level of HIV/AIDS knowledge among men who have sex with men in Brazil using the latent trait model estimated by Item Response Theory. Multicenter, cross-sectional study, carried out in ten Brazilian cities between 2008 and 2009. Adult men who have sex with men were recruited (n = 3,746) through Respondent Driven Sampling. HIV/AIDS knowledge was ascertained through ten statements by face-to-face interview and latent scores were obtained through two-parameter logistic modeling (difficulty and discrimination) using Item Response Theory. Differential item functioning was used to examine each item characteristic curve by age and schooling. Overall, the HIV/AIDS knowledge scores using Item Response Theory did not exceed 6.0 (scale 0-10), with mean and median values of 5.0 (SD = 0.9) and 5.3, respectively, with 40.7% of the sample with knowledge levels below the average. Some beliefs still exist in this population regarding the transmission of the virus by insect bites, by using public restrooms, and by sharing utensils during meals. With regard to the difficulty and discrimination parameters, eight items were located below the mean of the scale and were considered very easy, and four items presented very low discrimination parameter (items contributed to the inaccuracy of the measurement of knowledge among those with median level and above. Item Response Theory analysis, which focuses on the individual properties of each item, allows measures to be obtained that do not vary or depend on the questionnaire, which provides better ascertainment and accuracy of knowledge scores. Valid and reliable scales are essential for monitoring HIV/AIDS knowledge among the men who have sex with men population over time and in different geographic regions, and this psychometric model brings this advantage.

Item Response Data Analysis Using Stata Item Response Theory Package

Science.gov (United States)

Yang, Ji Seung; Zheng, Xiaying

2018-01-01

The purpose of this article is to introduce and review the capability and performance of the Stata item response theory (IRT) package that is available from Stata v.14, 2015. Using a simulated data set and a publicly available item response data set extracted from Programme of International Student Assessment, we review the IRT package from…

Item Banking with Embedded Standards

Science.gov (United States)

MacCann, Robert G.; Stanley, Gordon

2009-01-01

An item banking method that does not use Item Response Theory (IRT) is described. This method provides a comparable grading system across schools that would be suitable for low-stakes testing. It uses the Angoff standard-setting method to obtain item ratings that are stored with each item. An example of such a grading system is given, showing how…

P2-19: The Effect of item Repetition on Item-Context Association Depends on the Prior Exposure of Items

Directory of Open Access Journals (Sweden)

Hongmi Lee

2012-10-01

Full Text Available Previous studies have reported conflicting findings on whether item repetition has beneficial or detrimental effects on source memory. To reconcile such contradictions, we investigated whether the degree of pre-exposure of items can be a potential modulating factor. The experimental procedures spanned two consecutive days. On Day 1, participants were exposed to a set of unfamiliar faces. On Day 2, the same faces presented on the previous day were used again in half of the participants, whereas novel faces were used for the other half. Day 2 procedures consisted of three successive phases: item repetition, source association, and source memory test. In the item repetition phase, half of the face stimuli were repeatedly presented while participants were making male/female judgments. During the source association phase, both the repeated and the unrepeated faces appeared in one of the four locations on the screen. Finally, participants were tested on the location in which a given face was presented during the previous phase and reported the confidence of their memory. Source memory accuracy was measured as the percentage of correct non-guess trials. As results, we found a significant interaction between prior exposure and repetition. Repetition impaired source memory when the items had been pre-exposed on Day 1, while it led to greater accuracy in novel ones. These results show that pre-experimental exposure can modulate the effects of repetition on associative binding between an item and its contextual information, suggesting that pre-existing representation and novelty signal interact to form new episodic memory.

Investigating the Impact of Item Parameter Drift for Item Response Theory Models with Mixture Distributions

Directory of Open Access Journals (Sweden)

Yoon Soo ePark

2016-02-01

Full Text Available This study investigates the impact of item parameter drift (IPD on parameter and ability estimation when the underlying measurement model fits a mixture distribution, thereby violating the item invariance property of unidimensional item response theory (IRT models. An empirical study was conducted to demonstrate the occurrence of both IPD and an underlying mixture distribution using real-world data. Twenty-one trended anchor items from the 1999, 2003, and 2007 administrations of Trends in International Mathematics and Science Study (TIMSS were analyzed using unidimensional and mixture IRT models. TIMSS treats trended anchor items as invariant over testing administrations and uses pre-calibrated item parameters based on unidimensional IRT. However, empirical results showed evidence of two latent subgroups with IPD. Results showed changes in the distribution of examinee ability between latent classes over the three administrations. A simulation study was conducted to examine the impact of IPD on the estimation of ability and item parameters, when data have underlying mixture distributions. Simulations used data generated from a mixture IRT model and estimated using unidimensional IRT. Results showed that data reflecting IPD using mixture IRT model led to IPD in the unidimensional IRT model. Changes in the distribution of examinee ability also affected item parameters. Moreover, drift with respect to item discrimination and distribution of examinee ability affected estimates of examinee ability. These findings demonstrate the need to caution and evaluate IPD using a mixture IRT framework to understand its effect on item parameters and examinee ability.

Investigating the Impact of Item Parameter Drift for Item Response Theory Models with Mixture Distributions.

Science.gov (United States)

Park, Yoon Soo; Lee, Young-Sun; Xing, Kuan

2016-01-01

This study investigates the impact of item parameter drift (IPD) on parameter and ability estimation when the underlying measurement model fits a mixture distribution, thereby violating the item invariance property of unidimensional item response theory (IRT) models. An empirical study was conducted to demonstrate the occurrence of both IPD and an underlying mixture distribution using real-world data. Twenty-one trended anchor items from the 1999, 2003, and 2007 administrations of Trends in International Mathematics and Science Study (TIMSS) were analyzed using unidimensional and mixture IRT models. TIMSS treats trended anchor items as invariant over testing administrations and uses pre-calibrated item parameters based on unidimensional IRT. However, empirical results showed evidence of two latent subgroups with IPD. Results also showed changes in the distribution of examinee ability between latent classes over the three administrations. A simulation study was conducted to examine the impact of IPD on the estimation of ability and item parameters, when data have underlying mixture distributions. Simulations used data generated from a mixture IRT model and estimated using unidimensional IRT. Results showed that data reflecting IPD using mixture IRT model led to IPD in the unidimensional IRT model. Changes in the distribution of examinee ability also affected item parameters. Moreover, drift with respect to item discrimination and distribution of examinee ability affected estimates of examinee ability. These findings demonstrate the need to caution and evaluate IPD using a mixture IRT framework to understand its effects on item parameters and examinee ability.

Evaluation of a screening instrument for essential tremor

DEFF Research Database (Denmark)

Lorenz, Delia; Papengut, Frank; Frederiksen, Henrik

2008-01-01

To evaluate a screening instrument for essential tremor (ET) consisting of a seven-item questionnaire and a spiral drawing. A total of 2,448 Danish twins aged 70 years or more and a second sample aged 60 years or more (n = 1,684) from a population-based northern German cross-sectional study (Pop....... Definite or probable ET was diagnosed in 104 patients, possible in 86 and other tremors in 98 patients. The sensitivity of the screening instrument was 70.5%, the positive predictive value was 64.9%, the specificity was 68.2%, and the negative predictive value was 73.5%. Tremor severity correlated...... significantly with higher spiral scores and more positive items. More patients were identified by spiral drawing in all tremor groups. The interrater and intrarater reliability for spirals ranged from 0.7 to 0.8 using intraclass coefficient. A cluster analysis revealed that the questionnaire can be reduced...

CCR6-dependent positioning of memory B cells is essential for their ability to mount a recall response to antigen

Science.gov (United States)

Elgueta, Raul; Marks, Ellen; Nowak, Elizabeth; Menezes, Shinelle; Benson, Micah; Raman, Vanitha S.; Ortiz, Carla; O’Connell, Samuel; Hess, Henry; Lord, Graham M.; Noelle, Randolph

2014-01-01

Chemokine-dependent localization of specific B cell subsets within the immune microarchitecture is essential to insure successful cognate interactions. While cognate interactions between T cells and memory B cells (Bmem)5 are essential for the secondary humoral immune responses, the chemokine response patterns of Bmem cells are largely unknown. In contrast to naïve B cells, this study shows that antigen-specific Bmem cells have heightened expression of CCR6 and a selective chemotactic response to the CCR6 ligand, CCL20. While CCR6 appears be non-essential for the initial clonal expansion and maintenance of Bmem, CCR6 is essential for the ability of Bmem to respond to a recall response to their cognate antigen. This dependency was deemed intrinsic by studies in CCR6-deficient mice and in bone-marrow chimeric mice where CCR6 deficiency was limited to the B cell lineage. Finally, the mis-positioning of CCR6-deficient Bmem was revealed by immunohistological analysis with an altered distribution of CCR6-deficient Bmem from the marginal and perifollicular to the follicular/germinal center area. PMID:25505290

The Technical Quality of Test Items Generated Using a Systematic Approach to Item Writing.

Science.gov (United States)

Siskind, Theresa G.; Anderson, Lorin W.

The study was designed to examine the similarity of response options generated by different item writers using a systematic approach to item writing. The similarity of response options to student responses for the same item stems presented in an open-ended format was also examined. A non-systematic (subject matter expertise) approach and a…

A Method of Assessing Leadership Effectiveness: Introducing the Essential Behavioral Leadership Qualities Approach

Science.gov (United States)

Oyinlade, A. Olu

2006-01-01

Assessing the effectiveness of a leader is often a difficult exercise for many organizations. This is usually because most assessment procedures are influenced by organizational politics, they are not standard based, and the items on which a leader is assessed are undefined or poorly defined. This study presents the "Essential Behavioral…

Generalizability theory and item response theory

NARCIS (Netherlands)

Glas, Cornelis A.W.; Eggen, T.J.H.M.; Veldkamp, B.P.

2012-01-01

Item response theory is usually applied to items with a selected-response format, such as multiple choice items, whereas generalizability theory is usually applied to constructed-response tasks assessed by raters. However, in many situations, raters may use rating scales consisting of items with a

Sharing the cost of redundant items

DEFF Research Database (Denmark)

Hougaard, Jens Leth; Moulin, Hervé

2014-01-01

We ask how to share the cost of finitely many public goods (items) among users with different needs: some smaller subsets of items are enough to serve the needs of each user, yet the cost of all items must be covered, even if this entails inefficiently paying for redundant items. Typical examples...... are network connectivity problems when an existing (possibly inefficient) network must be maintained. We axiomatize a family cost ratios based on simple liability indices, one for each agent and for each item, measuring the relative worth of this item across agents, and generating cost allocation rules...... additive in costs....

Are commercially available essential oils from Australian native plants repellent to mosquitoes?

Science.gov (United States)

Maguranyi, Suzann K; Webb, Cameron E; Mansfield, Sarah; Russell, Richard C

2009-09-01

While the use of topical insect repellents, particularly those containing synthetic active ingredients such as deet (N,N-diethyl-3-methylbenzamide), are a mainstay in personal protection strategies emphasized in public health messages, there is a growing demand in the community for alternative repellents, particularly those of botanical origin and thus deemed to be "natural." This study evaluated the repellency of essential oils from 11 Australian native plants in 5% v/v formulations against Aedes aegypti, Culex quinquefasciatus, and Culex annulirostris under laboratory conditions. A blend of the top 3 performing oils was then compared with deet and a commercially available botanical insect repellent. All essential oils provided at least some protection against the 3 mosquito species, with the longest protection time (110 min) afforded by Prostanthera melissifolia against Cx. quinquefasciatus. Mean protection times against Ae. aegypti were substantially lower than those for the Culex spp. tested. Deet provided significantly longer protection against Ae. aegypti than both the 5% v/v blend of Leptospermum petersonii, Prostanthera melissifolia, and Melaleuca alternifolia (the 3 most effective oils) and the commercial botanical repellent. The results of this study indicate that these essential oils from Australian native plants offer limited protection against biting mosquitoes and that a blend of essential oils holds may offer commercial potential as a short-period repellent or under conditions of low mosquito abundance. However, it is important that public health messages continue to emphasize the greater effectiveness of deet-based repellents in areas with risks of mosquito-borne disease.

ITEM Project: Risk Communication on Exposure to Electromagnetic Radiation from Mobile Communications

International Nuclear Information System (INIS)

Oliveira, Carla; Carpinteiro, Goncalo; Correia, Luis M.; Fernandes, Carlos A.; Serralha, Afonso; Marques, Nuno

2004-01-01

The ITEM Project is a pioneer project in Portugal, providing public information on exposure to electromagnetic radiation, essentially due to mobile communication systems. The motivation, the main goals and the Project description are presented in this paper, as well as the website that provides the public dissemination of results and further significant information (www.lx.it.pt/item). This site provides information on different issues related to exposure to radiation, namely results of measurement campaigns conducted by a team on several locations in Portugal, and results of continuous measurements performed by autonomous stations located in public places in collaboration with municipal authorities. The global overview of the results from the measurement campaigns carried out up to present shows that all the analysed locations are in compliance with the radiation thresholds, i.e., all the electric field measured values are below the most restrictive threshold established at European level. (author)

Dissociating the neural correlates of intra-item and inter-item working-memory binding.

Directory of Open Access Journals (Sweden)

Carinne Piekema

Full Text Available BACKGROUND: Integration of information streams into a unitary representation is an important task of our cognitive system. Within working memory, the medial temporal lobe (MTL has been conceptually linked to the maintenance of bound representations. In a previous fMRI study, we have shown that the MTL is indeed more active during working-memory maintenance of spatial associations as compared to non-spatial associations or single items. There are two explanations for this result, the mere presence of the spatial component activates the MTL, or the MTL is recruited to bind associations between neurally non-overlapping representations. METHODOLOGY/PRINCIPAL FINDINGS: The current fMRI study investigates this issue further by directly comparing intrinsic intra-item binding (object/colour, extrinsic intra-item binding (object/location, and inter-item binding (object/object. The three binding conditions resulted in differential activation of brain regions. Specifically, we show that the MTL is important for establishing extrinsic intra-item associations and inter-item associations, in line with the notion that binding of information processed in different brain regions depends on the MTL. CONCLUSIONS/SIGNIFICANCE: Our findings indicate that different forms of working-memory binding rely on specific neural structures. In addition, these results extend previous reports indicating that the MTL is implicated in working-memory maintenance, challenging the classic distinction between short-term and long-term memory systems.

Generalizability theory and item response theory

OpenAIRE

Glas, Cornelis A.W.; Eggen, T.J.H.M.; Veldkamp, B.P.

2012-01-01

Item response theory is usually applied to items with a selected-response format, such as multiple choice items, whereas generalizability theory is usually applied to constructed-response tasks assessed by raters. However, in many situations, raters may use rating scales consisting of items with a selected-response format. This chapter presents a short overview of how item response theory and generalizability theory were integrated to model such assessments. Further, the precision of the esti...

The 12-item World Health Organization Disability Assessment Schedule II (WHO-DAS II: a nonparametric item response analysis

Directory of Open Access Journals (Sweden)

Fernandez Ana

2010-05-01

Full Text Available Abstract Background Previous studies have analyzed the psychometric properties of the World Health Organization Disability Assessment Schedule II (WHO-DAS II using classical omnibus measures of scale quality. These analyses are sample dependent and do not model item responses as a function of the underlying trait level. The main objective of this study was to examine the effectiveness of the WHO-DAS II items and their options in discriminating between changes in the underlying disability level by means of item response analyses. We also explored differential item functioning (DIF in men and women. Methods The participants were 3615 adult general practice patients from 17 regions of Spain, with a first diagnosed major depressive episode. The 12-item WHO-DAS II was administered by the general practitioners during the consultation. We used a non-parametric item response method (Kernel-Smoothing implemented with the TestGraf software to examine the effectiveness of each item (item characteristic curves and their options (option characteristic curves in discriminating between changes in the underliying disability level. We examined composite DIF to know whether women had a higher probability than men of endorsing each item. Results Item response analyses indicated that the twelve items forming the WHO-DAS II perform very well. All items were determined to provide good discrimination across varying standardized levels of the trait. The items also had option characteristic curves that showed good discrimination, given that each increasing option became more likely than the previous as a function of increasing trait level. No gender-related DIF was found on any of the items. Conclusions All WHO-DAS II items were very good at assessing overall disability. Our results supported the appropriateness of the weights assigned to response option categories and showed an absence of gender differences in item functioning.

Item Response Theory with Covariates (IRT-C): Assessing Item Recovery and Differential Item Functioning for the Three-Parameter Logistic Model

Science.gov (United States)

Tay, Louis; Huang, Qiming; Vermunt, Jeroen K.

2016-01-01

In large-scale testing, the use of multigroup approaches is limited for assessing differential item functioning (DIF) across multiple variables as DIF is examined for each variable separately. In contrast, the item response theory with covariate (IRT-C) procedure can be used to examine DIF across multiple variables (covariates) simultaneously. To…

The de Morton Mobility Index (DEMMI: An essential health index for an ageing world

Directory of Open Access Journals (Sweden)

Davidson Megan

2008-08-01

Full Text Available Abstract Background Existing instruments for measuring mobility are inadequate for accurately assessing older people across the broad spectrum of abilities. Like other indices that monitor critical aspects of health such as blood pressure tests, a mobility test for all older acute medical patients provides essential health data. We have developed and validated an instrument that captures essential information about the mobility status of older acute medical patients. Methods Items suitable for a new mobility instrument were generated from existing scales, patient interviews and focus groups with experts. 51 items were pilot tested on older acute medical inpatients. An interval-level unidimensional mobility measure was constructed using Rasch analysis. The final item set required minimal equipment and was quick and simple to administer. The de Morton Mobility Index (DEMMI was validated on an independent sample of older acute medical inpatients and its clinimetric properties confirmed. Results The DEMMI is a 15 item unidimensional measure of mobility. Reliability (MDC90, validity and the minimally clinically important difference (MCID of the DEMMI were consistent across independent samples. The MDC90 and MCID were 9 and 10 points respectively (on the 100 point Rasch converted interval DEMMI scale. Conclusion The DEMMI provides clinicians and researchers with a valid interval-level method for accurately measuring and monitoring mobility levels of older acute medical patients. DEMMI validation studies are underway in other clinical settings and in the community. Given the ageing population and the importance of mobility for health and community participation, there has never been a greater need for this instrument.

The randomly renewed general item and the randomly inspected item with exponential life distribution

International Nuclear Information System (INIS)

Schneeweiss, W.G.

1979-01-01

For a randomly renewed item the probability distributions of the time to failure and of the duration of down time and the expectations of these random variables are determined. Moreover, it is shown that the same theory applies to randomly checked items with exponential probability distribution of life such as electronic items. The case of periodic renewals is treated as an example. (orig.) [de

Cross-cultural differences in knee functional status outcomes in a polyglot society represented true disparities not biased by differential item functioning.

Science.gov (United States)

Deutscher, Daniel; Hart, Dennis L; Crane, Paul K; Dickstein, Ruth

2010-12-01

Comparative effectiveness research across cultures requires unbiased measures that accurately detect clinical differences between patient groups. The purpose of this study was to assess the presence and impact of differential item functioning (DIF) in knee functional status (FS) items administered using computerized adaptive testing (CAT) as a possible cause for observed differences in outcomes between 2 cultural patient groups in a polyglot society. This study was a secondary analysis of prospectively collected data. We evaluated data from 9,134 patients with knee impairments from outpatient physical therapy clinics in Israel. Items were analyzed for DIF related to sex, age, symptom acuity, surgical history, exercise history, and language used to complete the functional survey (Hebrew versus Russian). Several items exhibited DIF, but unadjusted FS estimates and FS estimates that accounted for DIF were essentially equal (intraclass correlation coefficient [2,1]>.999). No individual patient had a difference between unadjusted and adjusted FS estimates as large as the median standard error of the unadjusted estimates. Differences between groups defined by any of the covariates considered were essentially unchanged when using adjusted instead of unadjusted FS estimates. The greatest group-level impact was <0.3% of 1 standard deviation of the unadjusted FS estimates. Complete data where patients answered all items in the scale would have been preferred for DIF analysis, but only CAT data were available. Differences in FS outcomes between groups of patients with knee impairments who answered the knee CAT in Hebrew or Russian in Israel most likely reflected true differences that may reflect societal disparities in this health outcome.

17 CFR 260.7a-16 - Inclusion of items, differentiation between items and answers, omission of instructions.

Science.gov (United States)

2010-04-01

... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Inclusion of items, differentiation between items and answers, omission of instructions. 260.7a-16 Section 260.7a-16 Commodity and... INDENTURE ACT OF 1939 Formal Requirements § 260.7a-16 Inclusion of items, differentiation between items and...

The Effects of Test Length and Sample Size on Item Parameters in Item Response Theory

Science.gov (United States)

Sahin, Alper; Anil, Duygu

2017-01-01

This study investigates the effects of sample size and test length on item-parameter estimation in test development utilizing three unidimensional dichotomous models of item response theory (IRT). For this purpose, a real language test comprised of 50 items was administered to 6,288 students. Data from this test was used to obtain data sets of…

Approximation Preserving Reductions among Item Pricing Problems

Science.gov (United States)

Hamane, Ryoso; Itoh, Toshiya; Tomita, Kouhei

When a store sells items to customers, the store wishes to determine the prices of the items to maximize its profit. Intuitively, if the store sells the items with low (resp. high) prices, the customers buy more (resp. less) items, which provides less profit to the store. So it would be hard for the store to decide the prices of items. Assume that the store has a set V of n items and there is a set E of m customers who wish to buy those items, and also assume that each item i ∈ V has the production cost di and each customer ej ∈ E has the valuation vj on the bundle ej ⊆ V of items. When the store sells an item i ∈ V at the price ri, the profit for the item i is pi = ri - di. The goal of the store is to decide the price of each item to maximize its total profit. We refer to this maximization problem as the item pricing problem. In most of the previous works, the item pricing problem was considered under the assumption that pi ≥ 0 for each i ∈ V, however, Balcan, et al. [In Proc. of WINE, LNCS 4858, 2007] introduced the notion of “loss-leader, ” and showed that the seller can get more total profit in the case that pi < 0 is allowed than in the case that pi < 0 is not allowed. In this paper, we derive approximation preserving reductions among several item pricing problems and show that all of them have algorithms with good approximation ratio.

Which Statistic Should Be Used to Detect Item Preknowledge When the Set of Compromised Items Is Known?

Science.gov (United States)

Sinharay, Sandip

2017-09-01

Benefiting from item preknowledge is a major type of fraudulent behavior during educational assessments. Belov suggested the posterior shift statistic for detection of item preknowledge and showed its performance to be better on average than that of seven other statistics for detection of item preknowledge for a known set of compromised items. Sinharay suggested a statistic based on the likelihood ratio test for detection of item preknowledge; the advantage of the statistic is that its null distribution is known. Results from simulated and real data and adaptive and nonadaptive tests are used to demonstrate that the Type I error rate and power of the statistic based on the likelihood ratio test are very similar to those of the posterior shift statistic. Thus, the statistic based on the likelihood ratio test appears promising in detecting item preknowledge when the set of compromised items is known.

An emotional functioning item bank of 24 items for computerized adaptive testing (CAT) was established

DEFF Research Database (Denmark)

Petersen, Morten Aa.; Gamper, Eva-Maria; Costantini, Anna

2016-01-01

of the widely used EORTC Quality of Life questionnaire (QLQ-C30). STUDY DESIGN AND SETTING: On the basis of literature search and evaluations by international samples of experts and cancer patients, 38 candidate items were developed. The psychometric properties of the items were evaluated in a large...... international sample of cancer patients. This included evaluations of dimensionality, item response theory (IRT) model fit, differential item functioning (DIF), and of measurement precision/statistical power. RESULTS: Responses were obtained from 1,023 cancer patients from four countries. The evaluations showed...... that 24 items could be included in a unidimensional IRT model. DIF did not seem to have any significant impact on the estimation of EF. Evaluations indicated that the CAT measure may reduce sample size requirements by up to 50% compared to the QLQ-C30 EF scale without reducing power. CONCLUSION...

Factoring handedness data: I. Item analysis.

Science.gov (United States)

Messinger, H B; Messinger, M I

1995-12-01

Recently in this journal Peters and Murphy challenged the validity of factor analyses done on bimodal handedness data, suggesting instead that right- and left-handers be studied separately. But bimodality may be avoidable if attention is paid to Oldfield's questionnaire format and instructions for the subjects. Two characteristics appear crucial: a two-column LEFT-RIGHT format for the body of the instrument and what we call Oldfield's Admonition: not to indicate strong preference for handedness item, such as write, unless "... the preference is so strong that you would never try to use the other hand unless absolutely forced to...". Attaining unimodality of an item distribution would seem to overcome the objections of Peters and Murphy. In a 1984 survey in Boston we used Oldfield's ten-item questionnaire exactly as published. This produced unimodal item distributions. With reflection of the five-point item scale and a logarithmic transformation, we achieved a degree of normalization for the items. Two surveys elsewhere based on Oldfield's 20-item list but with changes in the questionnaire format and the instructions, yielded markedly different item distributions with peaks at each extreme and sometimes in the middle as well.

Item Modeling Concept Based on Multimedia Authoring

Directory of Open Access Journals (Sweden)

Janez Stergar

2008-09-01

Full Text Available In this paper a modern item design framework for computer based assessment based on Flash authoring environment will be introduced. Question design will be discussed as well as the multimedia authoring environment used for item modeling emphasized. Item type templates are a structured means of collecting and storing item information that can be used to improve the efficiency and security of the innovative item design process. Templates can modernize the item design, enhance and speed up the development process. Along with content creation, multimedia has vast potential for use in innovative testing. The introduced item design template is based on taxonomy of innovative items which have great potential for expanding the content areas and construct coverage of an assessment. The presented item design approach is based on GUI's – one for question design based on implemented item design templates and one for user interaction tracking/retrieval. The concept of user interfaces based on Flash technology will be discussed as well as implementation of the innovative approach of the item design forms with multimedia authoring. Also an innovative method for user interaction storage/retrieval based on PHP extending Flash capabilities in the proposed framework will be introduced.

The medial temporal lobes distinguish between within-item and item-context relations during autobiographical memory retrieval.

Science.gov (United States)

Sheldon, Signy; Levine, Brian

2015-12-01

During autobiographical memory retrieval, the medial temporal lobes (MTL) relate together multiple event elements, including object (within-item relations) and context (item-context relations) information, to create a cohesive memory. There is consistent support for a functional specialization within the MTL according to these relational processes, much of which comes from recognition memory experiments. In this study, we compared brain activation patterns associated with retrieving within-item relations (i.e., associating conceptual and sensory-perceptual object features) and item-context relations (i.e., spatial relations among objects) with respect to naturalistic autobiographical retrieval. We developed a novel paradigm that cued participants to retrieve information about past autobiographical events, non-episodic within-item relations, and non-episodic item-context relations with the perceptuomotor aspects of retrieval equated across these conditions. We used multivariate analysis techniques to extract common and distinct patterns of activity among these conditions within the MTL and across the whole brain, both in terms of spatial and temporal patterns of activity. The anterior MTL (perirhinal cortex and anterior hippocampus) was preferentially recruited for generating within-item relations later in retrieval whereas the posterior MTL (posterior parahippocampal cortex and posterior hippocampus) was preferentially recruited for generating item-context relations across the retrieval phase. These findings provide novel evidence for functional specialization within the MTL with respect to naturalistic memory retrieval. © 2015 Wiley Periodicals, Inc.

Differential item functioning of the patient-reported outcomes information system (PROMIS®) pain interference item bank by language (Spanish versus English).

Science.gov (United States)

Paz, Sylvia H; Spritzer, Karen L; Reise, Steven P; Hays, Ron D

2017-06-01

About 70% of Latinos, 5 years old or older, in the United States speak Spanish at home. Measurement equivalence of the PROMIS ® pain interference (PI) item bank by language of administration (English versus Spanish) has not been evaluated. A sample of 527 adult Spanish-speaking Latinos completed the Spanish version of the 41-item PROMIS ® pain interference item bank. We evaluate dimensionality, monotonicity and local independence of the Spanish-language items. Then we evaluate differential item functioning (DIF) using ordinal logistic regression with item response theory scores estimated from DIF-free "anchor" items. One of the 41 items in the Spanish version of the PROMIS ® PI item bank was identified as having significant uniform DIF. English- and Spanish-speaking subjects with the same level of pain interference responded differently to 1 of the 41 items in the PROMIS ® PI item bank. This item was not retained due to proprietary issues. The original English language item parameters can be used when estimating PROMIS ® PI scores.

A strategy for optimizing item-pool management

NARCIS (Netherlands)

Ariel, A.; van der Linden, Willem J.; Veldkamp, Bernard P.

2006-01-01

Item-pool management requires a balancing act between the input of new items into the pool and the output of tests assembled from it. A strategy for optimizing item-pool management is presented that is based on the idea of a periodic update of an optimal blueprint for the item pool to tune item

Item response theory - A first approach

Science.gov (United States)

Nunes, Sandra; Oliveira, Teresa; Oliveira, Amílcar

2017-07-01

The Item Response Theory (IRT) has become one of the most popular scoring frameworks for measurement data, frequently used in computerized adaptive testing, cognitively diagnostic assessment and test equating. According to Andrade et al. (2000), IRT can be defined as a set of mathematical models (Item Response Models - IRM) constructed to represent the probability of an individual giving the right answer to an item of a particular test. The number of Item Responsible Models available to measurement analysis has increased considerably in the last fifteen years due to increasing computer power and due to a demand for accuracy and more meaningful inferences grounded in complex data. The developments in modeling with Item Response Theory were related with developments in estimation theory, most remarkably Bayesian estimation with Markov chain Monte Carlo algorithms (Patz & Junker, 1999). The popularity of Item Response Theory has also implied numerous overviews in books and journals, and many connections between IRT and other statistical estimation procedures, such as factor analysis and structural equation modeling, have been made repeatedly (Van der Lindem & Hambleton, 1997). As stated before the Item Response Theory covers a variety of measurement models, ranging from basic one-dimensional models for dichotomously and polytomously scored items and their multidimensional analogues to models that incorporate information about cognitive sub-processes which influence the overall item response process. The aim of this work is to introduce the main concepts associated with one-dimensional models of Item Response Theory, to specify the logistic models with one, two and three parameters, to discuss some properties of these models and to present the main estimation procedures.

Investigating Separate and Concurrent Approaches for Item Parameter Drift in 3PL Item Response Theory Equating

Science.gov (United States)

Arce-Ferrer, Alvaro J.; Bulut, Okan

2017-01-01

This study examines separate and concurrent approaches to combine the detection of item parameter drift (IPD) and the estimation of scale transformation coefficients in the context of the common item nonequivalent groups design with the three-parameter item response theory equating. The study uses real and synthetic data sets to compare the two…

Analysis of differential item functioning in the depression item bank from the Patient Reported Outcome Measurement Information System (PROMIS: An item response theory approach

Directory of Open Access Journals (Sweden)

JOSEPH P. EIMICKE

2009-06-01

Full Text Available The aims of this paper are to present findings related to differential item functioning (DIF in the Patient Reported Outcome Measurement Information System (PROMIS depression item bank, and to discuss potential threats to the validity of results from studies of DIF. The 32 depression items studied were modified from several widely used instruments. DIF analyses of gender, age and education were performed using a sample of 735 individuals recruited by a survey polling firm. DIF hypotheses were generated by asking content experts to indicate whether or not they expected DIF to be present, and the direction of the DIF with respect to the studied comparison groups. Primary analyses were conducted using the graded item response model (for polytomous, ordered response category data with likelihood ratio tests of DIF, accompanied by magnitude measures. Sensitivity analyses were performed using other item response models and approaches to DIF detection. Despite some caveats, the items that are recommended for exclusion or for separate calibration were "I felt like crying" and "I had trouble enjoying things that I used to enjoy." The item, "I felt I had no energy," was also flagged as evidencing DIF, and recommended for additional review. On the one hand, false DIF detection (Type 1 error was controlled to the extent possible by ensuring model fit and purification. On the other hand, power for DIF detection might have been compromised by several factors, including sparse data and small sample sizes. Nonetheless, practical and not just statistical significance should be considered. In this case the overall magnitude and impact of DIF was small for the groups studied, although impact was relatively large for some individuals.

76 FR 60474 - Commercial Item Handbook

Science.gov (United States)

2011-09-29

... DEPARTMENT OF DEFENSE Defense Acquisition Regulations System Commercial Item Handbook AGENCY.... SUMMARY: DoD has updated its Commercial Item Handbook. The purpose of the Handbook is to help acquisition personnel develop sound business strategies for procuring commercial items. DoD is seeking industry input on...

20 CFR 416.1148 - If you have both in-kind support and maintenance and income that is deemed to you.

Science.gov (United States)

2010-04-01

... ADMINISTRATION SUPPLEMENTAL SECURITY INCOME FOR THE AGED, BLIND, AND DISABLED Income In-Kind Support and... income may be deemed to you, and you are temporarily absent from the household to attend school (§ 416.1167(b)), any food or shelter you receive at school is income to you unless your parent purchases it...

Spare Items validation

International Nuclear Information System (INIS)

Fernandez Carratala, L.

1998-01-01

There is an increasing difficulty for purchasing safety related spare items, with certifications by manufacturers for maintaining the original qualifications of the equipment of destination. The main reasons are, on the top of the logical evolution of technology, applied to the new manufactured components, the quitting of nuclear specific production lines and the evolution of manufacturers quality systems, originally based on nuclear codes and standards, to conventional industry standards. To face this problem, for many years different Dedication processes have been implemented to verify whether a commercial grade element is acceptable to be used in safety related applications. In the same way, due to our particular position regarding the spare part supplies, mainly from markets others than the american, C.N. Trillo has developed a methodology called Spare Items Validation. This methodology, which is originally based on dedication processes, is not a single process but a group of coordinated processes involving engineering, quality and management activities. These are to be performed on the spare item itself, its design control, its fabrication and its supply for allowing its use in destinations with specific requirements. The scope of application is not only focussed on safety related items, but also to complex design, high cost or plant reliability related components. The implementation in C.N. Trillo has been mainly curried out by merging, modifying and making the most of processes and activities which were already being performed in the company. (Author)

Item response theory analysis applied to the Spanish version of the Personal Outcomes Scale.

Science.gov (United States)

Guàrdia-Olmos, J; Carbó-Carreté, M; Peró-Cebollero, M; Giné, C

2017-11-01

The study of measurements of quality of life (QoL) is one of the great challenges of modern psychology and psychometric approaches. This issue has greater importance when examining QoL in populations that were historically treated on the basis of their deficiency, and recently, the focus has shifted to what each person values and desires in their life, as in cases of people with intellectual disability (ID). Many studies of QoL scales applied in this area have attempted to improve the validity and reliability of their components by incorporating various sources of information to achieve consistency in the data obtained. The adaptation of the Personal Outcomes Scale (POS) in Spanish has shown excellent psychometric attributes, and its administration has three sources of information: self-assessment, practitioner and family. The study of possible congruence or incongruence of observed distributions of each item between sources is therefore essential to ensure a correct interpretation of the measure. The aim of this paper was to analyse the observed distribution of items and dimensions from the three Spanish POS information sources cited earlier, using the item response theory. We studied a sample of 529 people with ID and their respective practitioners and family member, and in each case, we analysed items and factors using Samejima's model of polytomic ordinal scales. The results indicated an important number of items with differential effects regarding sources, and in some cases, they indicated significant differences in the distribution of items, factors and sources of information. As a result of this analysis, we must affirm that the administration of the POS, considering three sources of information, was adequate overall, but a correct interpretation of the results requires that it obtain much more information to consider, as well as some specific items in specific dimensions. The overall ratings, if these comments are considered, could result in bias. © 2017

Item Analysis in Introductory Economics Testing.

Science.gov (United States)

Tinari, Frank D.

1979-01-01

Computerized analysis of multiple choice test items is explained. Examples of item analysis applications in the introductory economics course are discussed with respect to three objectives: to evaluate learning; to improve test items; and to help improve classroom instruction. Problems, costs and benefits of the procedures are identified. (JMD)

A review of the effects on IRT item parameter estimates with a focus on misbehaving common items in test equating

Directory of Open Access Journals (Sweden)

Michalis P Michaelides

2010-10-01

Full Text Available Many studies have investigated the topic of change or drift in item parameter estimates in the context of Item Response Theory. Content effects, such as instructional variation and curricular emphasis, as well as context effects, such as the wording, position, or exposure of an item have been found to impact item parameter estimates. The issue becomes more critical when items with estimates exhibiting differential behavior across test administrations are used as common for deriving equating transformations. This paper reviews the types of effects on IRT item parameter estimates and focuses on the impact of misbehaving or aberrant common items on equating transformations. Implications relating to test validity and the judgmental nature of the decision to keep or discard aberrant common items are discussed, with recommendations for future research into more informed and formal ways of dealing with misbehaving common items.

A Review of the Effects on IRT Item Parameter Estimates with a Focus on Misbehaving Common Items in Test Equating.

Science.gov (United States)

Michaelides, Michalis P

2010-01-01

Many studies have investigated the topic of change or drift in item parameter estimates in the context of item response theory (IRT). Content effects, such as instructional variation and curricular emphasis, as well as context effects, such as the wording, position, or exposure of an item have been found to impact item parameter estimates. The issue becomes more critical when items with estimates exhibiting differential behavior across test administrations are used as common for deriving equating transformations. This paper reviews the types of effects on IRT item parameter estimates and focuses on the impact of misbehaving or aberrant common items on equating transformations. Implications relating to test validity and the judgmental nature of the decision to keep or discard aberrant common items are discussed, with recommendations for future research into more informed and formal ways of dealing with misbehaving common items.

A Comparison of the 27-Item and 12-Item Intolerance of Uncertainty Scales

Science.gov (United States)

Khawaja, Nigar G.; Yu, Lai Ngo Heidi

2010-01-01

The 27-item Intolerance of Uncertainty Scale (IUS) has become one of the most frequently used measures of Intolerance of Uncertainty. More recently, an abridged, 12-item version of the IUS has been developed. The current research used clinical (n = 50) and non-clinical (n = 56) samples to examine and compare the psychometric properties of both…

More is not Always Better: The Relation between Item Response and Item Response Time in Raven’s Matrices

Directory of Open Access Journals (Sweden)

Frank Goldhammer

2015-03-01

Full Text Available The role of response time in completing an item can have very different interpretations. Responding more slowly could be positively related to success as the item is answered more carefully. However, the association may be negative if working faster indicates higher ability. The objective of this study was to clarify the validity of each assumption for reasoning items considering the mode of processing. A total of 230 persons completed a computerized version of Raven’s Advanced Progressive Matrices test. Results revealed that response time overall had a negative effect. However, this effect was moderated by items and persons. For easy items and able persons the effect was strongly negative, for difficult items and less able persons it was less negative or even positive. The number of rules involved in a matrix problem proved to explain item difficulty significantly. Most importantly, a positive interaction effect between the number of rules and item response time indicated that the response time effect became less negative with an increasing number of rules. Moreover, exploratory analyses suggested that the error type influenced the response time effect.

Antibacterial Activity of Daucus crinitus Essential Oils along the Vegetative Life of the Plant

Directory of Open Access Journals (Sweden)

Amel Bendiabdellah

2013-01-01

Full Text Available The essential oils from the aerial parts of Daucus crinitus Desf. were analyzed at three developmental stages (early vegetative, early flowering, and full flowering. Oil yield was found to vary depending on the stage of development, and the highest content of oil (0.15% w/w was obtained at full flowering. The chemical composition of essential oils studied by GC and GC-MS showed a total of 71 compounds: 27 aliphatic compounds, 18 sesquiterpene hydrocarbons, 9 hydrocarbons monoterpene, 5 oxygenated monoterpenes, 5 phenolic compounds, 4 oxygenated sesquiterpenes, 2 oxygenated diterpenes, and 01 diterpene hydrocarbons. Whatever the analyzed stage, phenolic compounds were the most abundant group. Their level significantly increased during ripening and varied from 36.4 to 82.1%. Antimicrobial activities of oils were tested on four different microorganisms. The oils of various phenological stages showed high activity against Candida albicans (30 mm and Staphylococcus aureus (11–28 mm bacteria strains which are deemed very dangerous and very difficult to eliminate. Thus, they represent an inexpensive source of natural antibacterial substances that may potentially be used in pathogenic systems.

Negative effects of item repetition on source memory.

Science.gov (United States)

Kim, Kyungmi; Yi, Do-Joon; Raye, Carol L; Johnson, Marcia K

2012-08-01

In the present study, we explored how item repetition affects source memory for new item-feature associations (picture-location or picture-color). We presented line drawings varying numbers of times in Phase 1. In Phase 2, each drawing was presented once with a critical new feature. In Phase 3, we tested memory for the new source feature of each item from Phase 2. Experiments 1 and 2 demonstrated and replicated the negative effects of item repetition on incidental source memory. Prior item repetition also had a negative effect on source memory when different source dimensions were used in Phases 1 and 2 (Experiment 3) and when participants were explicitly instructed to learn source information in Phase 2 (Experiments 4 and 5). Importantly, when the order between Phases 1 and 2 was reversed, such that item repetition occurred after the encoding of critical item-source combinations, item repetition no longer affected source memory (Experiment 6). Overall, our findings did not support predictions based on item predifferentiation, within-dimension source interference, or general interference from multiple traces of an item. Rather, the findings were consistent with the idea that prior item repetition reduces attention to subsequent presentations of the item, decreasing the likelihood that critical item-source associations will be encoded.

Examination of the PROMIS upper extremity item bank.

Science.gov (United States)

Hung, Man; Voss, Maren W; Bounsanga, Jerry; Crum, Anthony B; Tyser, Andrew R

Clinical measurement. The psychometric properties of the PROMIS v1.2 UE item bank were tested on various samples prior to its release, but have not been fully evaluated among the orthopaedic population. This study assesses the performance of the UE item bank within the UE orthopaedic patient population. The UE item bank was administered to 1197 adult patients presenting to a tertiary orthopaedic clinic specializing in hand and UE conditions and was examined using traditional statistics and Rasch analysis. The UE item bank fits a unidimensional model (outfit MNSQ range from 0.64 to 1.70) and has adequate reliabilities (person = 0.84; item = 0.82) and local independence (item residual correlations range from -0.37 to 0.34). Only one item exhibits gender differential item functioning. Most items target low levels of function. The UE item bank is a useful clinical assessment tool. Additional items covering higher functions are needed to enhance validity. Supplemental testing is recommended for patients at higher levels of function until more high function UE items are developed. 2c. Copyright © 2016 Hanley & Belfus. Published by Elsevier Inc. All rights reserved.

Psychometric Consequences of Subpopulation Item Parameter Drift

Science.gov (United States)

Huggins-Manley, Anne Corinne

2017-01-01

This study defines subpopulation item parameter drift (SIPD) as a change in item parameters over time that is dependent on subpopulations of examinees, and hypothesizes that the presence of SIPD in anchor items is associated with bias and/or lack of invariance in three psychometric outcomes. Results show that SIPD in anchor items is associated…

Location Indices for Ordinal Polytomous Items Based on Item Response Theory. Research Report. ETS RR-15-20

Science.gov (United States)

Ali, Usama S.; Chang, Hua-Hua; Anderson, Carolyn J.

2015-01-01

Polytomous items are typically described by multiple category-related parameters; situations, however, arise in which a single index is needed to describe an item's location along a latent trait continuum. Situations in which a single index would be needed include item selection in computerized adaptive testing or test assembly. Therefore single…

Few items in the thyroid-related quality of life instrument ThyPRO exhibited differential item functioning.

Science.gov (United States)

Watt, Torquil; Groenvold, Mogens; Hegedüs, Laszlo; Bonnema, Steen Joop; Rasmussen, Åse Krogh; Feldt-Rasmussen, Ulla; Bjorner, Jakob Bue

2014-02-01

To evaluate the extent of differential item functioning (DIF) within the thyroid-specific quality of life patient-reported outcome measure, ThyPRO, according to sex, age, education and thyroid diagnosis. A total of 838 patients with benign thyroid diseases completed the ThyPRO questionnaire (84 five-point items, 13 scales). Uniform and nonuniform DIF were investigated using ordinal logistic regression, testing for both statistical significance and magnitude (∆R(2) > 0.02). Scale level was estimated by the sum score, after purification. Twenty instances of DIF in 17 of the 84 items were found. Eight according to diagnosis, where the goiter scale was the one most affected, possibly due to differing perceptions in patients with auto-immune thyroid diseases compared to patients with simple goiter. Eight DIFs according to age were found, of which 5 were in positively worded items, which younger patients were more likely to endorse; one according to gender: women were more likely to report crying, and three according to educational level. The vast majority of DIF had only minor influence on the scale scores (0.1-2.3 points on the 0-100 scales), but two DIF corresponded to a difference of 4.6 and 9.8, respectively. Ordinal logistic regression identified DIF in 17 of 84 items. The potential impact of this on the present scales was low, but items displaying DIF could be avoided when developing abbreviated scales, where the potential impact of DIF (due to fewer items) will be larger.

Loglinear multidimensional IRT models for polytomously scired Items

NARCIS (Netherlands)

Kelderman, Henk

1988-01-01

A loglinear item response theory (IRT) model is proposed that relates polytomously scored item responses to a multidimensional latent space. Each item may have a different response function where each item response may be explained by one or more latent traits. Item response functions may follow a

48 CFR 852.214-72 - Alternate item(s).

Science.gov (United States)

2010-10-01

... AND FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Texts of Provisions and Clauses 852.214-72... 2008) Bids on []* will be given equal consideration along with bids on []** and any such bids received... [].** * Contracting officer will insert an alternate item that is considered acceptable. ** Contracting officer will...

Effect of hard and soft water on mineral concentration of food items

International Nuclear Information System (INIS)

Khan, M.H.; Hafeez, M.

2006-01-01

The present study was undertaken with special reference to the change occurs in concentration of essential elements present in food items on cooking in hard and soft water. Fourteen water and 08 vegetable samples were collected from various selected sites of Muzaffarabad city and around. The parameters such as pH, conductivity and TDS of water samples were determined. The concentration of Ca and Mg being major minerals in both water and vegetable samples were determined before and after cooking by employing AAS technique. It was found that Ca has increased in vegetable samples cooked in hard water type, while in most cases it decreased when soft water was used. Magnesium has decreased in vegetables samples after cooking with hard water types. The extraction of Mg was more pronounced when soft water was used for cooking purpose. The role of Ca and Mg in human body as essential elements has been discussed. (author)

Macrostructural Treatment of Multi-word Lexical Items

Directory of Open Access Journals (Sweden)

Alenka Vrbinc

2011-05-01

Full Text Available The paper discusses the macrostructural treatment of multi-word lexical items in mono- and bilingual dictionaries. First, the classification of multi-word lexical items is presented, and special attention is paid to the discussion of compounds – a specific group of multi-word lexical items that is most commonly afforded headword status but whose inclusion in the headword list may also depend on spelling. Then the inclusion of multi-word lexical items in monolingual dictionaries is dealt with in greater detail, while the results of a short survey on the inclusion of five randomly chosen multi-word lexical items in seven English monolingual dictionaries are presented. The proposals as to how to treat these five multi-word lexical items in bilingual dictionaries are presented in the section about the inclusion of multi-word lexical items in bilingual dictionaries. The conclusion is that it is most important to take the users’ needs into consideration and to make any dictionary as user friendly as possible.

Losing Items in the Psychogeriatric Nursing Home

Directory of Open Access Journals (Sweden)

J. van Hoof PhD

2016-09-01

Full Text Available Introduction: Losing items is a time-consuming occurrence in nursing homes that is ill described. An explorative study was conducted to investigate which items got lost by nursing home residents, and how this affects the residents and family caregivers. Method: Semi-structured interviews and card sorting tasks were conducted with 12 residents with early-stage dementia and 12 family caregivers. Thematic analysis was applied to the outcomes of the sessions. Results: The participants stated that numerous personal items and assistive devices get lost in the nursing home environment, which had various emotional, practical, and financial implications. Significant amounts of time are spent on trying to find items, varying from 1 hr up to a couple of weeks. Numerous potential solutions were identified by the interviewees. Discussion: Losing items often goes together with limitations to the participation of residents. Many family caregivers are reluctant to replace lost items, as these items may get lost again.

A unified factor-analytic approach to the detection of item and test bias: Illustration with the effect of providing calculators to students with dyscalculia

Directory of Open Access Journals (Sweden)

Lee, M. K.

2016-01-01

Full Text Available An absence of measurement bias against distinct groups is a prerequisite for the use of a given psychological instrument in scientific research or high-stakes assessment. Factor analysis is the framework explicitly adopted for the identification of such bias when the instrument consists of a multi-test battery, whereas item response theory is employed when the focus narrows to a single test composed of discrete items. Item response theory can be treated as a mild nonlinearization of the standard factor model, and thus the essential unity of bias detection at the two levels merits greater recognition. Here we illustrate the benefits of a unified approach with a real-data example, which comes from a statewide test of mathematics achievement where examinees diagnosed with dyscalculia were accommodated with calculators. We found that items that can be solved by explicit arithmetical computation became easier for the accommodated examinees, but the quantitative magnitude of this differential item functioning (measurement bias was small.

‘Forget me (not?’ – Remembering forget-items versus un-cued items in directed forgetting

Directory of Open Access Journals (Sweden)

Bastian eZwissler

2015-11-01

Full Text Available Humans need to be able to selectively control their memories. Here, we investigate the underlying processes in item-method directed forgetting and compare the classic active memory cues in this paradigm with a passive instruction. Typically, individual items are presented and each is followed by either a forget- or remember-instruction. On a surprise test of all items, memory is then worse for to-be-forgotten items (TBF compared to to-be-remembered items (TBR. This is thought to result from selective rehearsal of TBR, or from active inhibition of TBF, or from both. However, evidence suggests that if a forget instruction initiates active processing, paradoxical effects may also arise. To investigate the underlying mechanisms, four experiments were conducted where un-cued items (UI were introduced and recognition performance was compared between TBR, TBF and UI stimuli. Accuracy was encouraged via a performance-dependent monetary bonus. Across all experiments, including perceptually fully matched variants, memory accuracy for TBF was reduced compared to TBR, but better than for UI. Moreover, participants used a more conservative response criterion when responding to TBF stimuli. Thus, ironically, the F cue results in active processing, but this does not have inhibitory effects that would impair recognition memory beyond a un-cued baseline condition. This casts doubts on inhibitory accounts of item-method directed forgetting and is also difficult to reconcile with pure selective rehearsal of TBR. While the F-cue does induce active processing, this does not result in particularly successful forgetting. The pattern seems most consistent with the notion of ironic processing.

Item selection via Bayesian IRT models.

Science.gov (United States)

Arima, Serena

2015-02-10

With reference to a questionnaire that aimed to assess the quality of life for dysarthric speakers, we investigate the usefulness of a model-based procedure for reducing the number of items. We propose a mixed cumulative logit model, which is known in the psychometrics literature as the graded response model: responses to different items are modelled as a function of individual latent traits and as a function of item characteristics, such as their difficulty and their discrimination power. We jointly model the discrimination and the difficulty parameters by using a k-component mixture of normal distributions. Mixture components correspond to disjoint groups of items. Items that belong to the same groups can be considered equivalent in terms of both difficulty and discrimination power. According to decision criteria, we select a subset of items such that the reduced questionnaire is able to provide the same information that the complete questionnaire provides. The model is estimated by using a Bayesian approach, and the choice of the number of mixture components is justified according to information criteria. We illustrate the proposed approach on the basis of data that are collected for 104 dysarthric patients by local health authorities in Lecce and in Milan. Copyright © 2014 John Wiley & Sons, Ltd.

CCR6-dependent positioning of memory B cells is essential for their ability to mount a recall response to antigen.

Science.gov (United States)

Elgueta, Raul; Marks, Ellen; Nowak, Elizabeth; Menezes, Shinelle; Benson, Micah; Raman, Vanitha S; Ortiz, Carla; O'Connell, Samuel; Hess, Henry; Lord, Graham M; Noelle, Randolph

2015-01-15

Chemokine-dependent localization of specific B cell subsets within the immune microarchitecture is essential to ensure successful cognate interactions. Although cognate interactions between T cells and memory B cells (B(mem)) are essential for the secondary humoral immune responses, the chemokine response patterns of B(mem) cells are largely unknown. In contrast to naive B cells, this study shows that Ag-specific B(mem) cells have heightened expression of CCR6 and a selective chemotactic response to the CCR6 ligand, CCL20. Although CCR6 appears be nonessential for the initial clonal expansion and maintenance of B(mem), CCR6 is essential for the ability of B(mem) to respond to a recall response to their cognate Ag. This dependency was deemed intrinsic by studies in CCR6-deficient mice and in bone marrow chimeric mice where CCR6 deficiency was limited to the B cell lineage. Finally, the mis-positioning of CCR6-deficient B(mem) was revealed by immunohistological analysis with an altered distribution of CCR6-deficient B(mem) from the marginal and perifollicular to the follicular/germinal center area. Copyright © 2015 by The American Association of Immunologists, Inc.

Item response theory analysis of the life orientation test-revised: age and gender differential item functioning analyses.

Science.gov (United States)

Steca, Patrizia; Monzani, Dario; Greco, Andrea; Chiesi, Francesca; Primi, Caterina

2015-06-01

This study is aimed at testing the measurement properties of the Life Orientation Test-Revised (LOT-R) for the assessment of dispositional optimism by employing item response theory (IRT) analyses. The LOT-R was administered to a large sample of 2,862 Italian adults. First, confirmatory factor analyses demonstrated the theoretical conceptualization of the construct measured by the LOT-R as a single bipolar dimension. Subsequently, IRT analyses for polytomous, ordered response category data were applied to investigate the items' properties. The equivalence of the items across gender and age was assessed by analyzing differential item functioning. Discrimination and severity parameters indicated that all items were able to distinguish people with different levels of optimism and adequately covered the spectrum of the latent trait. Additionally, the LOT-R appears to be gender invariant and, with minor exceptions, age invariant. Results provided evidence that the LOT-R is a reliable and valid measure of dispositional optimism. © The Author(s) 2014.

Consensus on items and quantities of clinical equipment required to deal with a mass casualties big bang incident: a national Delphi study.

Science.gov (United States)

Duncan, Edward A S; Colver, Keith; Dougall, Nadine; Swingler, Kevin; Stephenson, John; Abhyankar, Purva

2014-02-22

Major short-notice or sudden impact incidents, which result in a large number of casualties, are rare events. However health services must be prepared to respond to such events appropriately. In the United Kingdom (UK), a mass casualties incident is when the normal response of several National Health Service organizations to a major incident, has to be supported with extraordinary measures. Having the right type and quantity of clinical equipment is essential, but planning for such emergencies is challenging. To date, the equipment stored for such events has been selected on the basis of local clinical judgment and has evolved without an explicit evidence-base. This has resulted in considerable variations in the types and quantities of clinical equipment being stored in different locations. This study aimed to develop an expert consensus opinion of the essential items and minimum quantities of clinical equipment that is required to treat 100 people at the scene of a big bang mass casualties event. A three round modified Delphi study was conducted with 32 experts using a specifically developed web-based platform. Individuals were invited to participate if they had personal clinical experience of providing a pre-hospital emergency medical response to a mass casualties incident, or had responsibility in health emergency planning for mass casualties incidents and were in a position of authority within the sphere of emergency health planning. Each item's importance was measured on a 5-point Likert scale. The quantity of items required was measured numerically. Data were analyzed using nonparametric statistics. Experts achieved consensus on a total of 134 items (54%) on completion of the study. Experts did not reach consensus on 114 (46%) items. Median quantities and interquartile ranges of the items, and their recommended quantities were identified and are presented. This study is the first to produce an expert consensus on the items and quantities of clinical equipment

Software Note: Using BILOG for Fixed-Anchor Item Calibration

Science.gov (United States)

DeMars, Christine E.; Jurich, Daniel P.

2012-01-01

The nonequivalent groups anchor test (NEAT) design is often used to scale item parameters from two different test forms. A subset of items, called the anchor items or common items, are administered as part of both test forms. These items are used to adjust the item calibrations for any differences in the ability distributions of the groups taking…

Inventions on presenting textual items in Graphical User Interface

OpenAIRE

Mishra, Umakant

2014-01-01

Although a GUI largely replaces textual descriptions by graphical icons, the textual items are not completely removed. The textual items are inevitably used in window titles, message boxes, help items, menu items and popup items. Textual items are necessary for communicating messages that are beyond the limitation of graphical messages. However, it is necessary to harness the textual items on the graphical interface in such a way that they complement each other to produce the best effect. One...

Science Library of Test Items. Volume Eighteen. A Collection of Multiple Choice Test Items Relating Mainly to Chemistry.

Science.gov (United States)

New South Wales Dept. of Education, Sydney (Australia).

As one in a series of test item collections developed by the Assessment and Evaluation Unit of the Directorate of Studies, items are made available to teachers for the construction of unit tests or term examinations or as a basis for class discussion. Each collection was reviewed for content validity and reliability. The test items meet syllabus…

Science Library of Test Items. Volume Seventeen. A Collection of Multiple Choice Test Items Relating Mainly to Biology.

Science.gov (United States)

New South Wales Dept. of Education, Sydney (Australia).

As one in a series of test item collections developed by the Assessment and Evaluation Unit of the Directorate of Studies, items are made available to teachers for the construction of unit tests or term examinations or as a basis for class discussion. Each collection was reviewed for content validity and reliability. The test items meet syllabus…

Science Library of Test Items. Volume Nineteen. A Collection of Multiple Choice Test Items Relating Mainly to Geology.

Science.gov (United States)

New South Wales Dept. of Education, Sydney (Australia).

As one in a series of test item collections developed by the Assessment and Evaluation Unit of the Directorate of Studies, items are made available to teachers for the construction of unit tests or term examinations or as a basis for class discussion. Each collection was reviewed for content validity and reliability. The test items meet syllabus…

Feed mechanism and method for feeding minute items

Science.gov (United States)

Stringer, Timothy Kent [Bucyrus, KS; Yerganian, Simon Scott [Lee's Summit, MO

2009-10-20

A feeding mechanism and method for feeding minute items, such as capacitors, resistors, or solder preforms. The mechanism is adapted to receive a plurality of the randomly-positioned and randomly-oriented extremely small or minute items, and to isolate, orient, and position one or more of the items in a specific repeatable pickup location wherefrom they may be removed for use by, for example, a computer-controlled automated assembly machine. The mechanism comprises a sliding shelf adapted to receive and support the items; a wiper arm adapted to achieve a single even layer of the items; and a pushing arm adapted to push the items into the pickup location. The mechanism can be adapted for providing the items with a more exact orientation, and can also be adapted for use in a liquid environment.

Memory for Items and Relationships among Items Embedded in Realistic Scenes: Disproportionate Relational Memory Impairments in Amnesia

Science.gov (United States)

Hannula, Deborah E.; Tranel, Daniel; Allen, John S.; Kirchhoff, Brenda A.; Nickel, Allison E.; Cohen, Neal J.

2014-01-01

Objective The objective of this study was to examine the dependence of item memory and relational memory on medial temporal lobe (MTL) structures. Patients with amnesia, who either had extensive MTL damage or damage that was relatively restricted to the hippocampus, were tested, as was a matched comparison group. Disproportionate relational memory impairments were predicted for both patient groups, and those with extensive MTL damage were also expected to have impaired item memory. Method Participants studied scenes, and were tested with interleaved two-alternative forced-choice probe trials. Probe trials were either presented immediately after the corresponding study trial (lag 1), five trials later (lag 5), or nine trials later (lag 9) and consisted of the studied scene along with a manipulated version of that scene in which one item was replaced with a different exemplar (item memory test) or was moved to a new location (relational memory test). Participants were to identify the exact match of the studied scene. Results As predicted, patients were disproportionately impaired on the test of relational memory. Item memory performance was marginally poorer among patients with extensive MTL damage, but both groups were impaired relative to matched comparison participants. Impaired performance was evident at all lags, including the shortest possible lag (lag 1). Conclusions The results are consistent with the proposed role of the hippocampus in relational memory binding and representation, even at short delays, and suggest that the hippocampus may also contribute to successful item memory when items are embedded in complex scenes. PMID:25068665

Applying Hierarchical Model Calibration to Automatically Generated Items.

Science.gov (United States)

Williamson, David M.; Johnson, Matthew S.; Sinharay, Sandip; Bejar, Isaac I.

This study explored the application of hierarchical model calibration as a means of reducing, if not eliminating, the need for pretesting of automatically generated items from a common item model prior to operational use. Ultimately the successful development of automatic item generation (AIG) systems capable of producing items with highly similar…

41 CFR 101-27.404 - Review of items.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Review of items. 101-27.404 Section 101-27.404 Public Contracts and Property Management Federal Property Management...-Elimination of Items From Inventory § 101-27.404 Review of items. Except for standby or reserve stocks, items...

Towards an authoring system for item construction

NARCIS (Netherlands)

Rikers, Jos H.A.N.

1988-01-01

The process of writing test items is analyzed, and a blueprint is presented for an authoring system for test item writing to reduce invalidity and to structure the process of item writing. The developmental methodology is introduced, and the first steps in the process are reported. A historical

Modeling Local Item Dependence in Cloze and Reading Comprehension Test Items Using Testlet Response Theory

Science.gov (United States)

Baghaei, Purya; Ravand, Hamdollah

2016-01-01

In this study the magnitudes of local dependence generated by cloze test items and reading comprehension items were compared and their impact on parameter estimates and test precision was investigated. An advanced English as a foreign language reading comprehension test containing three reading passages and a cloze test was analyzed with a…

Test-retest reliability of selected items of Health Behaviour in School-aged Children (HBSC survey questionnaire in Beijing, China

Directory of Open Access Journals (Sweden)

Liu Yang

2010-08-01

Full Text Available Abstract Background Children's health and health behaviour are essential for their development and it is important to obtain abundant and accurate information to understand young people's health and health behaviour. The Health Behaviour in School-aged Children (HBSC study is among the first large-scale international surveys on adolescent health through self-report questionnaires. So far, more than 40 countries in Europe and North America have been involved in the HBSC study. The purpose of this study is to assess the test-retest reliability of selected items in the Chinese version of the HBSC survey questionnaire in a sample of adolescents in Beijing, China. Methods A sample of 95 male and female students aged 11 or 15 years old participated in a test and retest with a three weeks interval. Student Identity numbers of respondents were utilized to permit matching of test-retest questionnaires. 23 items concerning physical activity, sedentary behaviour, sleep and substance use were evaluated by using the percentage of response shifts and the single measure Intraclass Correlation Coefficients (ICC with 95% confidence interval (CI for all respondents and stratified by gender and age. Items on substance use were only evaluated for school children aged 15 years old. Results The percentage of no response shift between test and retest varied from 32% for the item on computer use at weekends to 92% for the three items on smoking. Of all the 23 items evaluated, 6 items (26% showed a moderate reliability, 12 items (52% displayed a substantial reliability and 4 items (17% indicated almost perfect reliability. No gender and age group difference of the test-retest reliability was found except for a few items on sedentary behaviour. Conclusions The overall findings of this study suggest that most selected indicators in the HBSC survey questionnaire have satisfactory test-retest reliability for the students in Beijing. Further test-retest studies in a large

10 CFR 835.605 - Labeling items and containers.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Labeling items and containers. 835.605 Section 835.605... items and containers. Except as provided at § 835.606, each item or container of radioactive material... information to permit individuals handling, using, or working in the vicinity of the items or containers to...

Obtaining a Proportional Allocation by Deleting Items

NARCIS (Netherlands)

Dorn, B.; de Haan, R.; Schlotter, I.; Röthe, J.

2017-01-01

We consider the following control problem on fair allocation of indivisible goods. Given a set I of items and a set of agents, each having strict linear preference over the items, we ask for a minimum subset of the items whose deletion guarantees the existence of a proportional allocation in the

Item-Based Top-N Recommendation Algorithms

Science.gov (United States)

2003-01-20

basket of items, utilized by many e-commerce sites, cannot take advantage of pre-computed user-to-user similarities. Finally, even though the...not discriminate between items that are present in frequent itemsets and items that are not, while still maintaining the computational advantages of...453219 0.02% 7.74 ccard 42629 68793 398619 0.01% 9.35 ecommerce 6667 17491 91222 0.08% 13.68 em 8002 1648 769311 5.83% 96.14 ml 943 1682 100000 6.31

A Review of Classical Methods of Item Analysis.

Science.gov (United States)

French, Christine L.

Item analysis is a very important consideration in the test development process. It is a statistical procedure to analyze test items that combines methods used to evaluate the important characteristics of test items, such as difficulty, discrimination, and distractibility of the items in a test. This paper reviews some of the classical methods for…

Electronics. Criterion-Referenced Test (CRT) Item Bank.

Science.gov (United States)

Davis, Diane, Ed.

This document contains 519 criterion-referenced multiple choice and true or false test items for a course in electronics. The test item bank is designed to work with both the Vocational Instructional Management System (VIMS) and the Vocational Administrative Management System (VAMS) in Missouri. The items are grouped into 15 units covering the…

26 CFR 301.6501(o)-3 - Partnership items.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 18 2010-04-01 2010-04-01 false Partnership items. 301.6501(o)-3 Section 301... § 301.6501(o)-3 Partnership items. (a) Partnership item defined. For purposes of section 6501(o) (as it..., and § 301.6511(g)-1, the term “partnership item” means— (1) Any item required to be taken into account...

Consensus development on the essential competencies for Iranian public health nutritionists.

Science.gov (United States)

Sadeghi-Ghotbabadi, Farzaneh; Shakibazadeh, Elham; Omidvar, Nasrin; Mortazavi, Fathieh; Kolahdooz, Fariba

2015-03-01

To assess key experts' opinion regarding essential competencies required for effective public health nutrition practice within the health-care system of Iran. Qualitative study using the modified Delphi technique through an email-delivered questionnaire. Iran. Fifty-five experts were contacted through email. The inclusion criterion for the study panel was being in a relevant senior-level position in nutrition science or public health nutrition in Iran. In the first round, forty-two out of fifty-five experts responded to the questionnaire (response rate=76 %). A sixty-five-item questionnaire was designed with nine competency areas, including 'nutrition science', 'planning and implementing nutritional interventions', 'health and nutrition services', 'advocacy and communication', 'assessment and analysis', 'evaluation', 'cultural, social and political aspects', 'using technology' and 'leadership and management'. All experts who had participated in the first round completed a modified version of the questionnaire with seventy-seven items in the second round. The experts scored 'nutrition science' as the most essential competency area, while more applied areas such as 'management and leadership' were less emphasized. In both rounds, the mean difference between the opinions of the necessity of each area was 5.6 %. The Iranian experts had general agreement on most of the core competency areas of public health nutritionists. The results indicated the need for capacity building and revisions to educational curricula for public health nutritionist programmes, with more emphasis on skill-based competency development.

A Balance Sheet for Educational Item Banking.

Science.gov (United States)

Hiscox, Michael D.

Educational item banking presents observers with a considerable paradox. The development of test items from scratch is viewed as wasteful, a luxury in times of declining resources. On the other hand, item banking has failed to become a mature technology despite large amounts of money and the efforts of talented professionals. The question of which…

Promoting cold-start items in recommender systems.

Science.gov (United States)

Liu, Jin-Hu; Zhou, Tao; Zhang, Zi-Ke; Yang, Zimo; Liu, Chuang; Li, Wei-Min

2014-01-01

As one of the major challenges, cold-start problem plagues nearly all recommender systems. In particular, new items will be overlooked, impeding the development of new products online. Given limited resources, how to utilize the knowledge of recommender systems and design efficient marketing strategy for new items is extremely important. In this paper, we convert this ticklish issue into a clear mathematical problem based on a bipartite network representation. Under the most widely used algorithm in real e-commerce recommender systems, the so-called item-based collaborative filtering, we show that to simply push new items to active users is not a good strategy. Interestingly, experiments on real recommender systems indicate that to connect new items with some less active users will statistically yield better performance, namely, these new items will have more chance to appear in other users' recommendation lists. Further analysis suggests that the disassortative nature of recommender systems contributes to such observation. In a word, getting in-depth understanding on recommender systems could pave the way for the owners to popularize their cold-start products with low costs.

Promoting Cold-Start Items in Recommender Systems

Science.gov (United States)

Liu, Jin-Hu; Zhou, Tao; Zhang, Zi-Ke; Yang, Zimo; Liu, Chuang; Li, Wei-Min

2014-01-01

As one of the major challenges, cold-start problem plagues nearly all recommender systems. In particular, new items will be overlooked, impeding the development of new products online. Given limited resources, how to utilize the knowledge of recommender systems and design efficient marketing strategy for new items is extremely important. In this paper, we convert this ticklish issue into a clear mathematical problem based on a bipartite network representation. Under the most widely used algorithm in real e-commerce recommender systems, the so-called item-based collaborative filtering, we show that to simply push new items to active users is not a good strategy. Interestingly, experiments on real recommender systems indicate that to connect new items with some less active users will statistically yield better performance, namely, these new items will have more chance to appear in other users' recommendation lists. Further analysis suggests that the disassortative nature of recommender systems contributes to such observation. In a word, getting in-depth understanding on recommender systems could pave the way for the owners to popularize their cold-start products with low costs. PMID:25479013

Mixed-Format Test Score Equating: Effect of Item-Type Multidimensionality, Length and Composition of Common-Item Set, and Group Ability Difference

Science.gov (United States)

Wang, Wei

2013-01-01

Mixed-format tests containing both multiple-choice (MC) items and constructed-response (CR) items are now widely used in many testing programs. Mixed-format tests often are considered to be superior to tests containing only MC items although the use of multiple item formats leads to measurement challenges in the context of equating conducted under…

Negative affect impairs associative memory but not item memory.

Science.gov (United States)

Bisby, James A; Burgess, Neil

2013-12-17

The formation of associations between items and their context has been proposed to rely on mechanisms distinct from those supporting memory for a single item. Although emotional experiences can profoundly affect memory, our understanding of how it interacts with different aspects of memory remains unclear. We performed three experiments to examine the effects of emotion on memory for items and their associations. By presenting neutral and negative items with background contexts, Experiment 1 demonstrated that item memory was facilitated by emotional affect, whereas memory for an associated context was reduced. In Experiment 2, arousal was manipulated independently of the memoranda, by a threat of shock, whereby encoding trials occurred under conditions of threat or safety. Memory for context was equally impaired by the presence of negative affect, whether induced by threat of shock or a negative item, relative to retrieval of the context of a neutral item in safety. In Experiment 3, participants were presented with neutral and negative items as paired associates, including all combinations of neutral and negative items. The results showed both above effects: compared to a neutral item, memory for the associate of a negative item (a second item here, context in Experiments 1 and 2) is impaired, whereas retrieval of the item itself is enhanced. Our findings suggest that negative affect impairs associative memory while recognition of a negative item is enhanced. They support dual-processing models in which negative affect or stress impairs hippocampal-dependent associative memory while the storage of negative sensory/perceptual representations is spared or even strengthened.

Non-ignorable missingness item response theory models for choice effects in examinee-selected items.

Science.gov (United States)

Liu, Chen-Wei; Wang, Wen-Chung

2017-11-01

Examinee-selected item (ESI) design, in which examinees are required to respond to a fixed number of items in a given set, always yields incomplete data (i.e., when only the selected items are answered, data are missing for the others) that are likely non-ignorable in likelihood inference. Standard item response theory (IRT) models become infeasible when ESI data are missing not at random (MNAR). To solve this problem, the authors propose a two-dimensional IRT model that posits one unidimensional IRT model for observed data and another for nominal selection patterns. The two latent variables are assumed to follow a bivariate normal distribution. In this study, the mirt freeware package was adopted to estimate parameters. The authors conduct an experiment to demonstrate that ESI data are often non-ignorable and to determine how to apply the new model to the data collected. Two follow-up simulation studies are conducted to assess the parameter recovery of the new model and the consequences for parameter estimation of ignoring MNAR data. The results of the two simulation studies indicate good parameter recovery of the new model and poor parameter recovery when non-ignorable missing data were mistakenly treated as ignorable. © 2017 The British Psychological Society.

A Case Study on an Item Writing Process: Use of Test Specifications, Nature of Group Dynamics, and Individual Item Writers' Characteristics

Science.gov (United States)

Kim, Jiyoung; Chi, Youngshin; Huensch, Amanda; Jun, Heesung; Li, Hongli; Roullion, Vanessa

2010-01-01

This article discusses a case study on an item writing process that reflects on our practical experience in an item development project. The purpose of the article is to share our lessons from the experience aiming to demystify item writing process. The study investigated three issues that naturally emerged during the project: how item writers use…

Automated Item Generation with Recurrent Neural Networks.

Science.gov (United States)

von Davier, Matthias

2018-03-12

Utilizing technology for automated item generation is not a new idea. However, test items used in commercial testing programs or in research are still predominantly written by humans, in most cases by content experts or professional item writers. Human experts are a limited resource and testing agencies incur high costs in the process of continuous renewal of item banks to sustain testing programs. Using algorithms instead holds the promise of providing unlimited resources for this crucial part of assessment development. The approach presented here deviates in several ways from previous attempts to solve this problem. In the past, automatic item generation relied either on generating clones of narrowly defined item types such as those found in language free intelligence tests (e.g., Raven's progressive matrices) or on an extensive analysis of task components and derivation of schemata to produce items with pre-specified variability that are hoped to have predictable levels of difficulty. It is somewhat unlikely that researchers utilizing these previous approaches would look at the proposed approach with favor; however, recent applications of machine learning show success in solving tasks that seemed impossible for machines not too long ago. The proposed approach uses deep learning to implement probabilistic language models, not unlike what Google brain and Amazon Alexa use for language processing and generation.

Science Library of Test Items. Volume Twenty-Two. A Collection of Multiple Choice Test Items Relating Mainly to Skills.

Science.gov (United States)

New South Wales Dept. of Education, Sydney (Australia).

As one in a series of test item collections developed by the Assessment and Evaluation Unit of the Directorate of Studies, items are made available to teachers for the construction of unit tests or term examinations or as a basis for class discussion. Each collection was reviewed for content validity and reliability. The test items meet syllabus…

Science Library of Test Items. Volume Twenty. A Collection of Multiple Choice Test Items Relating Mainly to Physics, 1.

Science.gov (United States)

New South Wales Dept. of Education, Sydney (Australia).

As one in a series of test item collections developed by the Assessment and Evaluation Unit of the Directorate of Studies, items are made available to teachers for the construction of unit tests or term examinations or as a basis for class discussion. Each collection was reviewed for content validity and reliability. The test items meet syllabus…

Does remembering emotional items impair recall of same-emotion items?

Science.gov (United States)

Sison, Jo Ann G; Mather, Mara

2007-04-01

In the part-set cuing effect, cuing a subset of previously studied items impairs recall of the remaining noncued items. This experiment reveals that cuing participants with previously-studied emotional pictures (e.g., fear-evoking pictures of people) can impair recall of pictures involving the same emotion but different content (e.g., fear-evoking pictures of animals). This indicates that new events can be organized in memory using emotion as a grouping function to create associations. However, whether new information is organized in memory along emotional or nonemotional lines appears to be a flexible process that depends on people's current focus. Mentioning in the instructions that the pictures were either amusement- or fear-related led to memory impairment for pictures with the same emotion as cued pictures, whereas mentioning that the pictures depicted either animals or people led to memory impairment for pictures with the same type of actor.

Modeling Item-Level and Step-Level Invariance Effects in Polytomous Items Using the Partial Credit Model

Science.gov (United States)

Gattamorta, Karina A.; Penfield, Randall D.; Myers, Nicholas D.

2012-01-01

Measurement invariance is a common consideration in the evaluation of the validity and fairness of test scores when the tested population contains distinct groups of examinees, such as examinees receiving different forms of a translated test. Measurement invariance in polytomous items has traditionally been evaluated at the item-level,…

Essential elements of an early intervention service for psychosis: the opinions of expert clinicians

Directory of Open Access Journals (Sweden)

Lewis Shôn

2004-07-01

Full Text Available Abstract Background Early intervention teams attempt to improve outcome in schizophrenia through earlier detection and the provision of phase-specific treatments. Whilst the number of early intervention teams is growing, there is a lack of clarity over their essential structural and functional elements. Methods A 'Delphi' exercise was carried out to identify how far there was consensus on the essential elements of early intervention teams in a group of 21 UK expert clinicians. Using published guidelines, an initial list was constructed containing 151 elements from ten categories of team structure and function. Results Overall there was expert consensus on the importance of 136 (90% of these elements. Of the items on which there was consensus, 106 (70.2% were rated essential, meaning that in their absence the functioning of the team would be severely impaired. Conclusion This degree of consensus over essential elements suggests that it is reasonable to define a model for UK early intervention teams, from which a measure of fidelity could be derived.

Item Information in the Rasch Model

NARCIS (Netherlands)

Engelen, Ron J.H.; van der Linden, Willem J.; Oosterloo, Sebe J.

1988-01-01

Fisher's information measure for the item difficulty parameter in the Rasch model and its marginal and conditional formulations are investigated. It is shown that expected item information in the unconditional model equals information in the marginal model, provided the assumption of sampling

Work ability as prognostic risk marker of disability pension : Single-item work ability score versus multi-item work ability index

NARCIS (Netherlands)

Roelen, C.A.M.; Rhenen, van W.; Groothoff, J.W.; Klink, van der J.J.L.; Twisk, W.R.; Heymans, M.W.

2014-01-01

Work ability predicts future disability pension (DP). A single-item work ability score (WAS) is emerging as a measure for work ability. This study compared single-item WAS with the multi-item work ability index (WAI) in its ability to identify workers at risk of DP.

CERN Running Club – Sale of Items

CERN Multimedia

CERN Running club

2018-01-01

The CERN Running Club is organising a sale of items  on 26 June from 11:30 – 13:00 in the entry area of Restaurant 2 (504 R-202). The items for sale are souvenir prizes of past Relay Races and comprise: Backpacks, thermos, towels, gloves & caps, lamps, long sleeve winter shirts and windproof vest. All items will be sold at 5 CHF.

Work ability as prognostic risk marker of disability pension: single-item work ability score versus multi-item work ability index

NARCIS (Netherlands)

Roelen, C.A.M.; van Rhenen, W.; Groothoff, J.W.; van der Klink, J.J.L.; Twisk, J.W.R.; Heymans, M.W.

2014-01-01

Objectives Work ability predicts future disability pension (DP). A single-item work ability score (WAS) is emerging as a measure for work ability. This study compared single-item WAS with the multi-item work ability index (WAI) in its ability to identify workers at risk of DP. Methods This

Work ability as prognostic risk marker of disability pension : single-item work ability score versus multi-item work ability index

NARCIS (Netherlands)

Roelen, Corne A. M.; van Rhenen, Willem; Groothoff, Johan W.; van der Klink, Jac J. L.; Twisk, Jos W. R.; Heymans, Martijn W.

Objectives Work ability predicts future disability pension (DP). A single-item work ability score (WAS) is emerging as a measure for work ability. This study compared single-item WAS with the multi-item work ability index (WAI) in its ability to identify workers at risk of DP. Methods This

Binomial test models and item difficulty

NARCIS (Netherlands)

van der Linden, Willem J.

1979-01-01

In choosing a binomial test model, it is important to know exactly what conditions are imposed on item difficulty. In this paper these conditions are examined for both a deterministic and a stochastic conception of item responses. It appears that they are more restrictive than is generally

Vegetable parenting practices scale: Item response modeling analyses

Science.gov (United States)

Our objective was to evaluate the psychometric properties of a vegetable parenting practices scale using multidimensional polytomous item response modeling which enables assessing item fit to latent variables and the distributional characteristics of the items in comparison to the respondents. We al...

Using 3–6 differences in essential fatty acids rather than 3/6 ratios gives useful food balance scores

Directory of Open Access Journals (Sweden)

Lands Bill

2012-05-01

Full Text Available Abstract Background The vitamin-like omega-3 and omega-6 essential fatty acids are converted in the body to a large family of hormones which act at selective receptors that occur on nearly every cell and tissue. A relative omega-3 deficit allows overabundant actions of omega-6 hormones to develop into health disorders. People need simple, explicit information on the balance of essential fatty acids in their foods to avoid accumulating unintended imbalances in their tissue omega-3 and omega-6 fatty acids. Results We developed an Omega 3–6 Balance Food Score that summarizes in a single value the balance among eleven omega-3 and omega-6 essential fatty acids in a food. The value allows a quantitative estimate of the impact of each food item on the proportions of omega-3 and omega-6 that will accumulate in the 20- and 22-carbon highly unsaturated fatty acids of blood, which is an important health risk assessment biomarker. Conclusions The impact of an individual food item upon a useful health risk assessment biomarker is easily evident in a simple, explicit value for the balance among eleven essential fatty acids nutrients. Foods with more positive Omega 3–6 Balance Food Scores will increase the percent of omega-3 in the biomarker, whereas those with more negative Scores will increase the percent of omega-6 in the biomarker.

Efficient Algorithms for Segmentation of Item-Set Time Series

Science.gov (United States)

Chundi, Parvathi; Rosenkrantz, Daniel J.

We propose a special type of time series, which we call an item-set time series, to facilitate the temporal analysis of software version histories, email logs, stock market data, etc. In an item-set time series, each observed data value is a set of discrete items. We formalize the concept of an item-set time series and present efficient algorithms for segmenting a given item-set time series. Segmentation of a time series partitions the time series into a sequence of segments where each segment is constructed by combining consecutive time points of the time series. Each segment is associated with an item set that is computed from the item sets of the time points in that segment, using a function which we call a measure function. We then define a concept called the segment difference, which measures the difference between the item set of a segment and the item sets of the time points in that segment. The segment difference values are required to construct an optimal segmentation of the time series. We describe novel and efficient algorithms to compute segment difference values for each of the measure functions described in the paper. We outline a dynamic programming based scheme to construct an optimal segmentation of the given item-set time series. We use the item-set time series segmentation techniques to analyze the temporal content of three different data sets—Enron email, stock market data, and a synthetic data set. The experimental results show that an optimal segmentation of item-set time series data captures much more temporal content than a segmentation constructed based on the number of time points in each segment, without examining the item set data at the time points, and can be used to analyze different types of temporal data.

Sources of interference in item and associative recognition memory.

Science.gov (United States)

Osth, Adam F; Dennis, Simon

2015-04-01

A powerful theoretical framework for exploring recognition memory is the global matching framework, in which a cue's memory strength reflects the similarity of the retrieval cues being matched against the contents of memory simultaneously. Contributions at retrieval can be categorized as matches and mismatches to the item and context cues, including the self match (match on item and context), item noise (match on context, mismatch on item), context noise (match on item, mismatch on context), and background noise (mismatch on item and context). We present a model that directly parameterizes the matches and mismatches to the item and context cues, which enables estimation of the magnitude of each interference contribution (item noise, context noise, and background noise). The model was fit within a hierarchical Bayesian framework to 10 recognition memory datasets that use manipulations of strength, list length, list strength, word frequency, study-test delay, and stimulus class in item and associative recognition. Estimates of the model parameters revealed at most a small contribution of item noise that varies by stimulus class, with virtually no item noise for single words and scenes. Despite the unpopularity of background noise in recognition memory models, background noise estimates dominated at retrieval across nearly all stimulus classes with the exception of high frequency words, which exhibited equivalent levels of context noise and background noise. These parameter estimates suggest that the majority of interference in recognition memory stems from experiences acquired before the learning episode. (c) 2015 APA, all rights reserved).

CTTITEM: SAS macro and SPSS syntax for classical item analysis.

Science.gov (United States)

Lei, Pui-Wa; Wu, Qiong

2007-08-01

This article describes the functions of a SAS macro and an SPSS syntax that produce common statistics for conventional item analysis including Cronbach's alpha, item difficulty index (p-value or item mean), and item discrimination indices (D-index, point biserial and biserial correlations for dichotomous items and item-total correlation for polytomous items). These programs represent an improvement over the existing SAS and SPSS item analysis routines in terms of completeness and user-friendliness. To promote routine evaluations of item qualities in instrument development of any scale, the programs are available at no charge for interested users. The program codes along with a brief user's manual that contains instructions and examples are downloadable from suen.ed.psu.edu/-pwlei/plei.htm.

Negative effects of item repetition on source memory

OpenAIRE

Kim, Kyungmi; Yi, Do-Joon; Raye, Carol L.; Johnson, Marcia K.

2012-01-01

In the present study, we explored how item repetition affects source memory for new item–feature associations (picture–location or picture–color). We presented line drawings varying numbers of times in Phase 1. In Phase 2, each drawing was presented once with a critical new feature. In Phase 3, we tested memory for the new source feature of each item from Phase 2. Experiments 1 and 2 demonstrated and replicated the negative effects of item repetition on incidental source memory. Prior item re...

Three controversies over item disclosure in medical licensure examinations

Directory of Open Access Journals (Sweden)

Yoon Soo Park

2015-09-01

Full Text Available In response to views on public's right to know, there is growing attention to item disclosure – release of items, answer keys, and performance data to the public – in medical licensure examinations and their potential impact on the test's ability to measure competence and select qualified candidates. Recent debates on this issue have sparked legislative action internationally, including South Korea, with prior discussions among North American countries dating over three decades. The purpose of this study is to identify and analyze three issues associated with item disclosure in medical licensure examinations – 1 fairness and validity, 2 impact on passing levels, and 3 utility of item disclosure – by synthesizing existing literature in relation to standards in testing. Historically, the controversy over item disclosure has centered on fairness and validity. Proponents of item disclosure stress test takers’ right to know, while opponents argue from a validity perspective. Item disclosure may bias item characteristics, such as difficulty and discrimination, and has consequences on setting passing levels. To date, there has been limited research on the utility of item disclosure for large scale testing. These issues requires ongoing and careful consideration.

Method of data mining including determining multidimensional coordinates of each item using a predetermined scalar similarity value for each item pair

Science.gov (United States)

Meyers, Charles E.; Davidson, George S.; Johnson, David K.; Hendrickson, Bruce A.; Wylie, Brian N.

1999-01-01

A method of data mining represents related items in a multidimensional space. Distance between items in the multidimensional space corresponds to the extent of relationship between the items. The user can select portions of the space to perceive. The user also can interact with and control the communication of the space, focusing attention on aspects of the space of most interest. The multidimensional spatial representation allows more ready comprehension of the structure of the relationships among the items.

Guide to good practices for the development of test items

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-01-01

While the methodology used in developing test items can vary significantly, to ensure quality examinations, test items should be developed systematically. Test design and development is discussed in the DOE Guide to Good Practices for Design, Development, and Implementation of Examinations. This guide is intended to be a supplement by providing more detailed guidance on the development of specific test items. This guide addresses the development of written examination test items primarily. However, many of the concepts also apply to oral examinations, both in the classroom and on the job. This guide is intended to be used as guidance for the classroom and laboratory instructor or curriculum developer responsible for the construction of individual test items. This document focuses on written test items, but includes information relative to open-reference (open book) examination test items, as well. These test items have been categorized as short-answer, multiple-choice, or essay. Each test item format is described, examples are provided, and a procedure for development is included. The appendices provide examples for writing test items, a test item development form, and examples of various test item formats.

38 CFR 3.1606 - Transportation items.

Science.gov (United States)

2010-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Transportation items. 3... Burial Benefits § 3.1606 Transportation items. The transportation costs of those persons who come within... shipment. (6) Cost of transportation by common carrier including amounts paid as Federal taxes. (7) Cost of...

Assessing difference between classical test theory and item ...

African Journals Online (AJOL)

Assessing difference between classical test theory and item response theory methods in scoring primary four multiple choice objective test items. ... All research participants were ranked on the CTT number correct scores and the corresponding IRT item pattern scores from their performance on the PRISMADAT. Wilcoxon ...

The basics of item response theory using R

CERN Document Server

Baker, Frank B

2017-01-01

This graduate-level textbook is a tutorial for item response theory that covers both the basics of item response theory and the use of R for preparing graphical presentation in writings about the theory. Item response theory has become one of the most powerful tools used in test construction, yet one of the barriers to learning and applying it is the considerable amount of sophisticated computational effort required to illustrate even the simplest concepts. This text provides the reader access to the basic concepts of item response theory freed of the tedious underlying calculations. It is intended for those who possess limited knowledge of educational measurement and psychometrics. Rather than presenting the full scope of item response theory, this textbook is concise and practical and presents basic concepts without becoming enmeshed in underlying mathematical and computational complexities. Clearly written text and succinct R code allow anyone familiar with statistical concepts to explore and apply item re...

Science Library of Test Items. Volume Twenty-One. A Collection of Multiple Choice Test Items Relating Mainly to Physics, 2.

Science.gov (United States)

New South Wales Dept. of Education, Sydney (Australia).

As one in a series of test item collections developed by the Assessment and Evaluation Unit of the Directorate of Studies, items are made available to teachers for the construction of unit tests or term examinations or as a basis for class discussion. Each collection was reviewed for content validity and reliability. The test items meet syllabus…

Few items in the thyroid-related quality of life instrument ThyPRO exhibited differential item functioning

DEFF Research Database (Denmark)

Watt, Torquil; Grønvold, Mogens; Hegedüs, Laszlo

2014-01-01

To evaluate the extent of differential item functioning (DIF) within the thyroid-specific quality of life patient-reported outcome measure, ThyPRO, according to sex, age, education and thyroid diagnosis.......To evaluate the extent of differential item functioning (DIF) within the thyroid-specific quality of life patient-reported outcome measure, ThyPRO, according to sex, age, education and thyroid diagnosis....

Effect of Differential Item Functioning on Test Equating

Science.gov (United States)

Kabasakal, Kübra Atalay; Kelecioglu, Hülya

2015-01-01

This study examines the effect of differential item functioning (DIF) items on test equating through multilevel item response models (MIRMs) and traditional IRMs. The performances of three different equating models were investigated under 24 different simulation conditions, and the variables whose effects were examined included sample size, test…

Item bias detection in the Hospital Anxiety and Depression Scale using structural equation modeling: comparison with other item bias detection methods

NARCIS (Netherlands)

Verdam, M.G.E.; Oort, F.J.; Sprangers, M.A.G.

Purpose Comparison of patient-reported outcomes may be invalidated by the occurrence of item bias, also known as differential item functioning. We show two ways of using structural equation modeling (SEM) to detect item bias: (1) multigroup SEM, which enables the detection of both uniform and

Calibration of Automatically Generated Items Using Bayesian Hierarchical Modeling.

Science.gov (United States)

Johnson, Matthew S.; Sinharay, Sandip

For complex educational assessments, there is an increasing use of "item families," which are groups of related items. However, calibration or scoring for such an assessment requires fitting models that take into account the dependence structure inherent among the items that belong to the same item family. C. Glas and W. van der Linden…

ACER Chemistry Test Item Collection. ACER Chemtic Year 12.

Science.gov (United States)

Australian Council for Educational Research, Hawthorn.

The chemistry test item banks contains 225 multiple-choice questions suitable for diagnostic and achievement testing; a three-page teacher's guide; answer key with item facilities; an answer sheet; and a 45-item sample achievement test. Although written for the new grade 12 chemistry course in Victoria, Australia, the items are widely applicable.…

Counterfeit and Fraudulent Items - Mitigating the risk

International Nuclear Information System (INIS)

Tannenbaum, Marc

2011-01-01

This presentation (slides) provides an overview of the industry's challenges and activities. Firstly, it outlines the differences between counterfeit, fraudulent, suspect, and also substandard items. Notice is given that items could be found not to meet the standard, but the difference in the intent to deceive with counterfeit and fraudulent items is the critical element. Examples from other industries are used which also rely heavily on the assurance of quality for safety. It also informs that EPRI has just completed a report in October 2009 in coordination with other US government agencies and industry organizations; this report, entitled Counterfeit, Substandard and Fraudulent Items, number 1019163, is available for free on the EPRI web site. As a follow-up to this report, EPRI is developing a CFSI Database; any country interested in a collaborative agreement is invited to use and contribute to the database information. Finally, it stresses the importance of the oversight of contractors, training to raise the awareness of the employees and the inspectors, and having a response plan for identified items

Utilizing Response Time Distributions for Item Selection in CAT

Science.gov (United States)

Fan, Zhewen; Wang, Chun; Chang, Hua-Hua; Douglas, Jeffrey

2012-01-01

Traditional methods for item selection in computerized adaptive testing only focus on item information without taking into consideration the time required to answer an item. As a result, some examinees may receive a set of items that take a very long time to finish, and information is not accrued as efficiently as possible. The authors propose two…

Item analysis and evaluation in the examinations in the faculty of ...

African Journals Online (AJOL)

2014-11-05

Nov 5, 2014 ... Key words: Classical test theory, item analysis, item difficulty, item discrimination, item response theory, reliability ... the probability of answering an item correctly or of attaining ..... A Monte Carlo comparison of item and person.

Are great apes able to reason from multi-item samples to populations of food items?

Science.gov (United States)

Eckert, Johanna; Rakoczy, Hannes; Call, Josep

2017-10-01

Inductive learning from limited observations is a cognitive capacity of fundamental importance. In humans, it is underwritten by our intuitive statistics, the ability to draw systematic inferences from populations to randomly drawn samples and vice versa. According to recent research in cognitive development, human intuitive statistics develops early in infancy. Recent work in comparative psychology has produced first evidence for analogous cognitive capacities in great apes who flexibly drew inferences from populations to samples. In the present study, we investigated whether great apes (Pongo abelii, Pan troglodytes, Pan paniscus, Gorilla gorilla) also draw inductive inferences in the opposite direction, from samples to populations. In two experiments, apes saw an experimenter randomly drawing one multi-item sample from each of two populations of food items. The populations differed in their proportion of preferred to neutral items (24:6 vs. 6:24) but apes saw only the distribution of food items in the samples that reflected the distribution of the respective populations (e.g., 4:1 vs. 1:4). Based on this observation they were then allowed to choose between the two populations. Results show that apes seemed to make inferences from samples to populations and thus chose the population from which the more favorable (4:1) sample was drawn in Experiment 1. In this experiment, the more attractive sample not only contained proportionally but also absolutely more preferred food items than the less attractive sample. Experiment 2, however, revealed that when absolute and relative frequencies were disentangled, apes performed at chance level. Whether these limitations in apes' performance reflect true limits of cognitive competence or merely performance limitations due to accessory task demands is still an open question. © 2017 Wiley Periodicals, Inc.

An NCME Instructional Module on Polytomous Item Response Theory Models

Science.gov (United States)

Penfield, Randall David

2014-01-01

A polytomous item is one for which the responses are scored according to three or more categories. Given the increasing use of polytomous items in assessment practices, item response theory (IRT) models specialized for polytomous items are becoming increasingly common. The purpose of this ITEMS module is to provide an accessible overview of…

41 CFR 101-27.204 - Types of shelf-life items.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Types of shelf-life items...-Management of Shelf-Life Materials § 101-27.204 Types of shelf-life items. Shelf-life items are classified as nonextendable (Type I) and extendable (Type II). Type I items have a definite storage life after which the item...

Constructing the 32-item Fitness-to-Drive Screening Measure.

Science.gov (United States)

Medhizadah, Shabnam; Classen, Sherrilene; Johnson, Andrew M

2018-04-01

The Fitness-to-Drive Screening Measure © (FTDS) enables proxies to identify at-risk older drivers via 54 driving-related items, but may be too lengthy for widespread uptake. We reduced the number of items in the FTDS and validated the shorter measure, using 200 caregiver responses. Exploratory factor analysis and classical test theory techniques were used to determine the most interpretable factor model and the minimum number of items to be used for predicting fitness to drive. The extent to which the shorter FTDS predicted the results of the 54-item FTDS was evaluated through correlational analysis. A three-factor model best represented the empirical data. Classical test theory techniques lead to the development of the 32-item FTDS. The 32-item FTDS was highly correlated ( r = .99, p = .05) with the FTDS. The 32-item FTDS may provide raters with a faster and more efficient way to identify at-risk older drivers.

Tailored Cloze: Improved with Classical Item Analysis Techniques.

Science.gov (United States)

Brown, James Dean

1988-01-01

The reliability and validity of a cloze procedure used as an English-as-a-second-language (ESL) test in China were improved by applying traditional item analysis and selection techniques. The 'best' test items were chosen on the basis of item facility and discrimination indices, and were administered as a 'tailored cloze.' 29 references listed.…

Is it nutrients, food items, diet quality or eating behaviours that are responsible for the association of children's diet with sleep?

Science.gov (United States)

Khan, Mohammad K A; Faught, Erin L; Chu, Yen Li; Ekwaru, John P; Storey, Kate E; Veugelers, Paul J

2017-08-01

Both diet quality and sleep duration of children have declined in the past decades. Several studies have suggested that diet and sleep are associated; however, it is not established which aspects of the diet are responsible for this association. Is it nutrients, food items, diet quality or eating behaviours? We surveyed 2261 grade 5 children on their dietary intake and eating behaviours, and their parents on their sleep duration and sleep quality. We performed factor analysis to identify and quantify the essential factors among 57 nutrients, 132 food items and 19 eating behaviours. We considered these essential factors along with a diet quality score in multivariate regression analyses to assess their independent associations with sleep. Nutrients, food items and diet quality did not exhibit independent associations with sleep, whereas two groupings of eating behaviours did. 'Unhealthy eating habits and environments' was independently associated with sleep. For each standard deviation increase in their factor score, children had 6 min less sleep and were 12% less likely to have sleep of good quality. 'Snacking between meals and after supper' was independently associated with sleep quality. For each standard deviation increase in its factor score, children were 7% less likely to have good quality sleep. This study demonstrates that eating behaviours are responsible for the associations of diet with sleep among children. Health promotion programmes aiming to improve sleep should therefore focus on discouraging eating behaviours such as eating alone or in front of the TV, and snacking between meals and after supper. © 2016 European Sleep Research Society.

Analysis test of understanding of vectors with the three-parameter logistic model of item response theory and item response curves technique

Directory of Open Access Journals (Sweden)

Suttida Rakkapao

2016-10-01

Full Text Available This study investigated the multiple-choice test of understanding of vectors (TUV, by applying item response theory (IRT. The difficulty, discriminatory, and guessing parameters of the TUV items were fit with the three-parameter logistic model of IRT, using the parscale program. The TUV ability is an ability parameter, here estimated assuming unidimensionality and local independence. Moreover, all distractors of the TUV were analyzed from item response curves (IRC that represent simplified IRT. Data were gathered on 2392 science and engineering freshmen, from three universities in Thailand. The results revealed IRT analysis to be useful in assessing the test since its item parameters are independent of the ability parameters. The IRT framework reveals item-level information, and indicates appropriate ability ranges for the test. Moreover, the IRC analysis can be used to assess the effectiveness of the test’s distractors. Both IRT and IRC approaches reveal test characteristics beyond those revealed by the classical analysis methods of tests. Test developers can apply these methods to diagnose and evaluate the features of items at various ability levels of test takers.

Analysis test of understanding of vectors with the three-parameter logistic model of item response theory and item response curves technique

Science.gov (United States)

Rakkapao, Suttida; Prasitpong, Singha; Arayathanitkul, Kwan

2016-12-01

This study investigated the multiple-choice test of understanding of vectors (TUV), by applying item response theory (IRT). The difficulty, discriminatory, and guessing parameters of the TUV items were fit with the three-parameter logistic model of IRT, using the parscale program. The TUV ability is an ability parameter, here estimated assuming unidimensionality and local independence. Moreover, all distractors of the TUV were analyzed from item response curves (IRC) that represent simplified IRT. Data were gathered on 2392 science and engineering freshmen, from three universities in Thailand. The results revealed IRT analysis to be useful in assessing the test since its item parameters are independent of the ability parameters. The IRT framework reveals item-level information, and indicates appropriate ability ranges for the test. Moreover, the IRC analysis can be used to assess the effectiveness of the test's distractors. Both IRT and IRC approaches reveal test characteristics beyond those revealed by the classical analysis methods of tests. Test developers can apply these methods to diagnose and evaluate the features of items at various ability levels of test takers.

41 CFR 101-26.605 - Items other than petroleum products and electronic items available from the Defense Logistics...

Science.gov (United States)

2010-07-01

... petroleum products and electronic items available from the Defense Logistics Agency. 101-26.605 Section 101... available from the Defense Logistics Agency. Agencies required to use GSA supply sources should also use... Logistics Agency, the catalog will contain only those items in Federal supply classification classes which...

Extending item response theory to online homework

Directory of Open Access Journals (Sweden)

Gerd Kortemeyer

2014-05-01

Full Text Available Item response theory (IRT becomes an increasingly important tool when analyzing “big data” gathered from online educational venues. However, the mechanism was originally developed in traditional exam settings, and several of its assumptions are infringed upon when deployed in the online realm. For a large-enrollment physics course for scientists and engineers, the study compares outcomes from IRT analyses of exam and homework data, and then proceeds to investigate the effects of each confounding factor introduced in the online realm. It is found that IRT yields the correct trends for learner ability and meaningful item parameters, yet overall agreement with exam data is moderate. It is also found that learner ability and item discrimination is robust over a wide range with respect to model assumptions and introduced noise. Item difficulty is also robust, but over a narrower range.

Editorial Changes and Item Performance: Implications for Calibration and Pretesting

Directory of Open Access Journals (Sweden)

Heather Stoffel

2014-11-01

Full Text Available Previous research on the impact of text and formatting changes on test-item performance has produced mixed results. This matter is important because it is generally acknowledged that any change to an item requires that it be recalibrated. The present study investigated the effects of seven classes of stylistic changes on item difficulty, discrimination, and response time for a subset of 65 items that make up a standardized test for physician licensure completed by 31,918 examinees in 2012. One of two versions of each item (original or revised was randomly assigned to examinees such that each examinee saw only two experimental items, with each item being administered to approximately 480 examinees. The stylistic changes had little or no effect on item difficulty or discrimination; however, one class of edits -' changing an item from an open lead-in (incomplete statement to a closed lead-in (direct question -' did result in slightly longer response times. Data for nonnative speakers of English were analyzed separately with nearly identical results. These findings have implications for the conventional practice of repretesting (or recalibrating items that have been subjected to minor editorial changes.

Item response theory analysis of Centers for Disease Control and Prevention Health-Related Quality of Life (CDC HRQOL) items in adults with arthritis.

Science.gov (United States)

Mielenz, Thelma J; Callahan, Leigh F; Edwards, Michael C

2016-03-12

Examine the feasibility of performing an item response theory (IRT) analysis on two of the Centers for Disease Control and Prevention health-related quality of life (CDC HRQOL) modules - the 4-item Healthy Days Core Module (HDCM) and the 5-item Healthy days Symptoms Module (HDSM). Previous principal components analyses confirm that the two scales both assess a mix of mental (CDC-MH) and physical health (CDC-PH). The purpose is to conduct item response theory (IRT) analysis on the CDC-MH and CDC-PH scales separately. 2182 patients with self-reported or physician-diagnosed arthritis completed a cross-sectional survey including HDCM and HDSM items. Besides global health, the other 8 items ask the number of days that some statement was true; we chose to recode the data into 8 categories based on observed clustering. The IRT assumptions were assessed using confirmatory factor analysis and the data could be modeled using an unidimensional IRT model. The graded response model was used for IRT analyses and CDC-MH and CDC-PH scales were analyzed separately in flexMIRT. The IRT parameter estimates for the five-item CDC-PH all appeared reasonable. The three-item CDC-MH did not have reasonable parameter estimates. The CDC-PH scale is amenable to IRT analysis but the existing The CDC-MH scale is not. We suggest either using the 4-item Healthy Days Core Module (HDCM) and the 5-item Healthy days Symptoms Module (HDSM) as they currently stand or the CDC-PH scale alone if the primary goal is to measure physical health related HRQOL.

On multidimensional item response theory -- a coordinate free approach

OpenAIRE

Antal, Tamás

2007-01-01

A coordinate system free definition of complex structure multidimensional item response theory (MIRT) for dichotomously scored items is presented. The point of view taken emphasizes the possibilities and subtleties of understanding MIRT as a multidimensional extension of the ``classical'' unidimensional item response theory models. The main theorem of the paper is that every monotonic MIRT model looks the same; they are all trivial extensions of univariate item response theory.

Verification of Differential Item Functioning (DIF) Status of West ...

African Journals Online (AJOL)

This study investigated test item bias and Differential Item Functioning (DIF) of West African ... items in chemistry function differentially with respect to gender and location. In Aba education zone of Abia, 50 secondary schools were purposively ...

Mixture Item Response Theory-MIMIC Model: Simultaneous Estimation of Differential Item Functioning for Manifest Groups and Latent Classes

Science.gov (United States)

Bilir, Mustafa Kuzey

2009-01-01

This study uses a new psychometric model (mixture item response theory-MIMIC model) that simultaneously estimates differential item functioning (DIF) across manifest groups and latent classes. Current DIF detection methods investigate DIF from only one side, either across manifest groups (e.g., gender, ethnicity, etc.), or across latent classes…

Acne severity grading: determining essential clinical components and features using a Delphi consensus.

Science.gov (United States)

Tan, Jerry; Wolfe, Barat; Weiss, Jonathan; Stein-Gold, Linda; Bikowski, Joseph; Del Rosso, James; Webster, Guy F; Lucky, Anne; Thiboutot, Diane; Wilkin, Jonathan; Leyden, James; Chren, Mary-Margaret

2012-08-01

There are multiple global scales for acne severity grading but no singular standard. Our objective was to determine the essential clinical components (content items) and features (property-related items) for an acne global grading scale for use in research and clinical practice using an iterative method, the Delphi process. Ten acne experts were invited to participate in a Web-based Delphi survey comprising 3 iterative rounds of questions. In round 1, the experts identified the following clinical components (primary acne lesions, number of lesions, extent, regional involvement, secondary lesions, and patient experiences) and features (clinimetric properties, ease of use, categorization of severity based on photographs or text, and acceptance by all stakeholders). In round 2, consensus for inclusion in the scale was established for primary lesions, number, sites, and extent; as well as clinimetric properties and ease of use. In round 3, consensus for inclusion was further established for categorization and acceptance. Patient experiences were excluded and no consensus was achieved for secondary lesions. The Delphi panel consisted solely of the United States (U.S.)-based acne experts. Using an established method for achieving consensus, experts in acne vulgaris concluded that an ideal acne global grading scale would comprise the essential clinical components of primary acne lesions, their quantity, extent, and facial and extrafacial sites of involvement; with features of clinimetric properties, categorization, efficiency, and acceptance. Copyright © 2011 American Academy of Dermatology, Inc. Published by Mosby, Inc. All rights reserved.

Understanding and quantifying cognitive complexity level in mathematical problem solving items

Directory of Open Access Journals (Sweden)

SUSAN E. EMBRETSON

2008-09-01

Full Text Available The linear logistic test model (LLTM; Fischer, 1973 has been applied to a wide variety of new tests. When the LLTM application involves item complexity variables that are both theoretically interesting and empirically supported, several advantages can result. These advantages include elaborating construct validity at the item level, defining variables for test design, predicting parameters of new items, item banking by sources of complexity and providing a basis for item design and item generation. However, despite the many advantages of applying LLTM to test items, it has been applied less often to understand the sources of complexity for large-scale operational test items. Instead, previously calibrated item parameters are modeled using regression techniques because raw item response data often cannot be made available. In the current study, both LLTM and regression modeling are applied to mathematical problem solving items from a widely used test. The findings from the two methods are compared and contrasted for their implications for continued development of ability and achievement tests based on mathematical problem solving items.

Improved Approximation Algorithms for Item Pricing with Bounded Degree and Valuation

Science.gov (United States)

Hamane, Ryoso; Itoh, Toshiya

When a store sells items to customers, the store wishes to decide the prices of the items to maximize its profit. If the store sells the items with low (resp. high) prices, the customers buy more (resp. less) items, which provides less profit to the store. It would be hard for the store to decide the prices of items. Assume that a store has a set V of n items and there is a set C of m customers who wish to buy those items. The goal of the store is to decide the price of each item to maximize its profit. We refer to this maximization problem as an item pricing problem. We classify the item pricing problems according to how many items the store can sell or how the customers valuate the items. If the store can sell every item i with unlimited (resp. limited) amount, we refer to this as unlimited supply (resp. limited supply). We say that the item pricing problem is single-minded if each customer j∈C wishes to buy a set ej⊆V of items and assigns valuation w(ej)≥0. For the single-minded item pricing problems (in unlimited supply), Balcan and Blum regarded them as weighted k-hypergraphs and gave several approximation algorithms. In this paper, we focus on the (pseudo) degree of k-hypergraphs and the valuation ratio, i. e., the ratio between the smallest and the largest valuations. Then for the single-minded item pricing problems (in unlimited supply), we show improved approximation algorithms (for k-hypergraphs, general graphs, bipartite graphs, etc.) with respect to the maximum (pseudo) degree and the valuation ratio.

Item-level factor analysis of the Self-Efficacy Scale.

Science.gov (United States)

Bunketorp Käll, Lina

2014-03-01

This study explores the internal structure of the Self-Efficacy Scale (SES) using item response analysis. The SES was previously translated into Swedish and modified to encompass all types of pain, not exclusively back pain. Data on perceived self-efficacy in 47 patients with subacute whiplash-associated disorders were derived from a previously conducted randomized-controlled trial. The item-level factor analysis was carried out using a six-step procedure. To further study the item inter-relationships and to determine the underlying structure empirically, the 20 items of the SES were also subjected to principal component analysis with varimax rotation. The analyses showed two underlying factors, named 'social activities' and 'physical activities', with seven items loading on each factor. The remaining six items of the SES appeared to measure somewhat different constructs and need to be analysed further.

Negative affect impairs associative memory but not item memory.

OpenAIRE

Bisby, J. A.; Burgess, N.

2014-01-01

The formation of associations between items and their context has been proposed to rely on mechanisms distinct from those supporting memory for a single item. Although emotional experiences can profoundly affect memory, our understanding of how it interacts with different aspects of memory remains unclear. We performed three experiments to examine the effects of emotion on memory for items and their associations. By presenting neutral and negative items with background contexts, Experiment 1 ...

Hazardous metals in yellow items used in RCAs

International Nuclear Information System (INIS)

Brown, K.F.; Rankin, W.N.

1992-01-01

Yellow items used in Radiologically Controlled Areas (RCAs) that could contain hazardous metals were identified. X-ray fluorescence analyses indicated that thirty of the fifty-two items do contain hazardous metals. It is important to minimize the hazardous metals put into the wastes. The authors recommend that the specifications for all yellow items stocked in Stores be changed to specify that they contain no hazardous metals

Evaluating the Psychometric Characteristics of Generated Multiple-Choice Test Items

Science.gov (United States)

Gierl, Mark J.; Lai, Hollis; Pugh, Debra; Touchie, Claire; Boulais, André-Philippe; De Champlain, André

2016-01-01

Item development is a time- and resource-intensive process. Automatic item generation integrates cognitive modeling with computer technology to systematically generate test items. To date, however, items generated using cognitive modeling procedures have received limited use in operational testing situations. As a result, the psychometric…

Can Item Keyword Feedback Help Remediate Knowledge Gaps?

Science.gov (United States)

Feinberg, Richard A; Clauser, Amanda L

2016-10-01

In graduate medical education, assessment results can effectively guide professional development when both assessment and feedback support a formative model. When individuals cannot directly access the test questions and responses, a way of using assessment results formatively is to provide item keyword feedback. The purpose of the following study was to investigate whether exposure to item keyword feedback aids in learner remediation. Participants included 319 trainees who completed a medical subspecialty in-training examination (ITE) in 2012 as first-year fellows, and then 1 year later in 2013 as second-year fellows. Performance on 2013 ITE items in which keywords were, or were not, exposed as part of the 2012 ITE score feedback was compared across groups based on the amount of time studying (preparation). For the same items common to both 2012 and 2013 ITEs, response patterns were analyzed to investigate changes in answer selection. Test takers who indicated greater amounts of preparation on the 2013 ITE did not perform better on the items in which keywords were exposed compared to those who were not exposed. The response pattern analysis substantiated overall growth in performance from the 2012 ITE. For items with incorrect responses on both attempts, examinees selected the same option 58% of the time. Results from the current study were unsuccessful in supporting the use of item keywords in aiding remediation. Unfortunately, the results did provide evidence of examinees retaining misinformation.

Method using a density field for locating related items for data mining

Science.gov (United States)

Wylie, Brian N.

2002-01-01

A method for locating related items in a geometric space transforms relationships among items to geometric locations. The method locates items in the geometric space so that the distance between items corresponds to the degree of relatedness. The method facilitates communication of the structure of the relationships among the items. The method makes use of numeric values as a measure of similarity between each pairing of items. The items are given initial coordinates in the space. An energy is then determined for each item from the item's distance and similarity to other items, and from the density of items assigned coordinates near the item. The distance and similarity component can act to draw items with high similarities close together, while the density component can act to force all items apart. If a terminal condition is not yet reached, then new coordinates can be determined for one or more items, and the energy determination repeated. The iteration can terminate, for example, when the total energy reaches a threshold, when each item's energy is below a threshold, after a certain amount of time or iterations.

Maintenance of item and order information in verbal working memory.

Science.gov (United States)

Camos, Valérie; Lagner, Prune; Loaiza, Vanessa M

2017-09-01

Although verbal recall of item and order information is well-researched in short-term memory paradigms, there is relatively little research concerning item and order recall from working memory. The following study examined whether manipulating the opportunity for attentional refreshing and articulatory rehearsal in a complex span task differently affected the recall of item- and order-specific information of the memoranda. Five experiments varied the opportunity for articulatory rehearsal and attentional refreshing in a complex span task, but the type of recall was manipulated between experiments (item and order, order only, and item only recall). The results showed that impairing attentional refreshing and articulatory rehearsal similarly affected recall regardless of whether the scoring procedure (Experiments 1 and 4) or recall requirements (Experiments 2, 3, and 5) reflected item- or order-specific recall. This implies that both mechanisms sustain the maintenance of item and order information, and suggests that the common cumulative functioning of these two mechanisms to maintain items could be at the root of order maintenance.

Do people with and without medical conditions respond similarly to the short health anxiety inventory? An assessment of differential item functioning using item response theory.

Science.gov (United States)

LeBouthillier, Daniel M; Thibodeau, Michel A; Alberts, Nicole M; Hadjistavropoulos, Heather D; Asmundson, Gordon J G

2015-04-01

Individuals with medical conditions are likely to have elevated health anxiety; however, research has not demonstrated how medical status impacts response patterns on health anxiety measures. Measurement bias can undermine the validity of a questionnaire by overestimating or underestimating scores in groups of individuals. We investigated whether the Short Health Anxiety Inventory (SHAI), a widely-used measure of health anxiety, exhibits medical condition-based bias on item and subscale levels, and whether the SHAI subscales adequately assess the health anxiety continuum. Data were from 963 individuals with diabetes, breast cancer, or multiple sclerosis, and 372 healthy individuals. Mantel-Haenszel tests and item characteristic curves were used to classify the severity of item-level differential item functioning in all three medical groups compared to the healthy group. Test characteristic curves were used to assess scale-level differential item functioning and whether the SHAI subscales adequately assess the health anxiety continuum. Nine out of 14 items exhibited differential item functioning. Two items exhibited differential item functioning in all medical groups compared to the healthy group. In both Thought Intrusion and Fear of Illness subscales, differential item functioning was associated with mildly deflated scores in medical groups with very high levels of the latent traits. Fear of Illness items poorly discriminated between individuals with low and very low levels of the latent trait. While individuals with medical conditions may respond differentially to some items, clinicians and researchers can confidently use the SHAI with a variety of medical populations without concern of significant bias. Copyright © 2015 Elsevier Inc. All rights reserved.

Comparison on Computed Tomography using industrial items

DEFF Research Database (Denmark)

Angel, Jais Andreas Breusch; De Chiffre, Leonardo

2014-01-01

In a comparison involving 27 laboratories from 8 countries, measurements on two common industrial items, a polymer part and a metal part, were carried out using X-ray Computed Tomography. All items were measured using coordinate measuring machines before and after circulation, with reference...

Using Item Response Theory to Develop a 60-Item Representation of the NEO PI-R Using the International Personality Item Pool: Development of the IPIP-NEO-60.

Science.gov (United States)

Maples-Keller, Jessica L; Williamson, Rachel L; Sleep, Chelsea E; Carter, Nathan T; Campbell, W Keith; Miller, Joshua D

2017-10-31

Given advantages of freely available and modifiable measures, an increase in the use of measures developed from the International Personality Item Pool (IPIP), including the 300-item representation of the Revised NEO Personality Inventory (NEO PI-R; Costa & McCrae, 1992a ) has occurred. The focus of this study was to use item response theory to develop a 60-item, IPIP-based measure of the Five-Factor Model (FFM) that provides equal representation of the FFM facets and to test the reliability and convergent and criterion validity of this measure compared to the NEO Five Factor Inventory (NEO-FFI). In an undergraduate sample (n = 359), scores from the NEO-FFI and IPIP-NEO-60 demonstrated good reliability and convergent validity with the NEO PI-R and IPIP-NEO-300. Additionally, across criterion variables in the undergraduate sample as well as a community-based sample (n = 757), the NEO-FFI and IPIP-NEO-60 demonstrated similar nomological networks across a wide range of external variables (r ICC = .96). Finally, as expected, in an MTurk sample the IPIP-NEO-60 demonstrated advantages over the Big Five Inventory-2 (Soto & John, 2017 ; n = 342) with regard to the Agreeableness domain content. The results suggest strong reliability and validity of the IPIP-NEO-60 scores.

16 CFR 304.6 - Marking requirements for imitation numismatic items.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Marking requirements for imitation... for imitation numismatic items. (a) An imitation numismatic item which is manufactured in the United... the item. (3) An imitation numismatic item of incusable material shall be incused with the word “COPY...

A comparison of Rasch item-fit and Cronbach's alpha item reduction analysis for the development of a Quality of Life scale for children and adolescents.

Science.gov (United States)

Erhart, M; Hagquist, C; Auquier, P; Rajmil, L; Power, M; Ravens-Sieberer, U

2010-07-01

This study compares item reduction analysis based on classical test theory (maximizing Cronbach's alpha - approach A), with analysis based on the Rasch Partial Credit Model item-fit (approach B), as applied to children and adolescents' health-related quality of life (HRQoL) items. The reliability and structural, cross-cultural and known-group validity of the measures were examined. Within the European KIDSCREEN project, 3019 children and adolescents (8-18 years) from seven European countries answered 19 HRQoL items of the Physical Well-being dimension of a preliminary KIDSCREEN instrument. The Cronbach's alpha and corrected item total correlation (approach A) were compared with infit mean squares and the Q-index item-fit derived according to a partial credit model (approach B). Cross-cultural differential item functioning (DIF ordinal logistic regression approach), structural validity (confirmatory factor analysis and residual correlation) and relative validity (RV) for socio-demographic and health-related factors were calculated for approaches (A) and (B). Approach (A) led to the retention of 13 items, compared with 11 items with approach (B). The item overlap was 69% for (A) and 78% for (B). The correlation coefficient of the summated ratings was 0.93. The Cronbach's alpha was similar for both versions [0.86 (A); 0.85 (B)]. Both approaches selected some items that are not strictly unidimensional and items displaying DIF. RV ratios favoured (A) with regard to socio-demographic aspects. Approach (B) was superior in RV with regard to health-related aspects. Both types of item reduction analysis should be accompanied by additional analyses. Neither of the two approaches was universally superior with regard to cultural, structural and known-group validity. However, the results support the usability of the Rasch method for developing new HRQoL measures for children and adolescents.

Dissociation between source and item memory in Parkinson's disease

Institute of Scientific and Technical Information of China (English)

Hu Panpan; Li Youhai; Ma Huijuan; Xi Chunhua; Chen Xianwen; Wang Kai

2014-01-01

Background Episodic memory includes information about item memory and source memory.Many researches support the hypothesis that these two memory systems are implemented by different brain structures.The aim of this study was to investigate the characteristics of item memory and source memory processing in patients with Parkinson's disease (PD),and to further verify the hypothesis of dual-process model of source and item memory.Methods We established a neuropsychological battery to measure the performance of item memory and source memory.Totally 35 PD individuals and 35 matched healthy controls (HC) were administrated with the battery.Item memory task consists of the learning and recognition of high-frequency national Chinese characters; source memory task consists of the learning and recognition of three modes (character,picture,and image) of objects.Results Compared with the controls,the idiopathic PD patients have been impaired source memory (PD vs.HC:0.65±0.06 vs.0.72±0.09,P=0.001),but not impaired in item memory (PD vs.HC:0.65±0.07 vs.0.67±0.08,P=0.240).Conclusions The present experiment provides evidence for dissociation between item and source memory in PD patients,thereby strengthening the claim that the item or source memory rely on different brain structures.PD patients show poor source memory,in which dopamine plays a critical role.

Development of a provisional essential medicines list for children in Canada: consensus process.

Science.gov (United States)

Woods, Hannah; Oronsaye, Efosa; Bali, Anjli; Rajakulasingam, Yathavan; Lee, Taehoon; Umali, Norman; Cohen, Eyal; Finkelstein, Yaron; Offringa, Martin; Persaud, Nav

2018-03-26

Worldwide, many countries have developed a list of essential medicines for children to improve prescribing. We aimed to create an essential medicines list for children in Canada. We adapted the previously created preliminary list of essential medicines for adults in Canada and the WHO Model List of Essential Medicines for Children to create a provisional list of essential medicines for children in Canada. Canadian clinicians made suggestions for changes. Literature relevant to each suggestion was presented to clinician-scientists, who used a modified nominal group technique to make recommendations on the suggestions. Ontario Public Drug Programs prescription data were reviewed to identify commonly prescribed medications missing from the list. Literature relevant to these medications was shared with a clinician-scientist review panel to determine which should be added, and a revised list was developed. A total of 76 items were removed from the list of essential medicines for adults in Canada because they were not indicated for use in children or were not relevant in the Canadian health care context; 7 medications were added to the child list based on Ontario Public Drugs Programs prescribing data and clinician-scientist review. Suggestions to add, remove or substitute medications were made by peer-reviewers and resulted in removal of 1 medication and replacement of 1 medication. The process produced a provisional list of 67 essential medications for children. A provisional list of 67 essential medicines for children was created through a peer-reviewed, multistep process based on current clinical evidence, Canadian clinical practice guidelines and historical prescribing data. It is publicly posted at http://cleanmeds.ca/. The list should be further developed based on wider input and should be continuously revised based on emerging evidence of the safety and effectiveness of these medicines in all pediatric age groups. Copyright 2018, Joule Inc. or its licensors.

Collaborative Filtering Based on Sequential Extraction of User-Item Clusters

Science.gov (United States)

Honda, Katsuhiro; Notsu, Akira; Ichihashi, Hidetomo

Collaborative filtering is a computational realization of “word-of-mouth” in network community, in which the items prefered by “neighbors” are recommended. This paper proposes a new item-selection model for extracting user-item clusters from rectangular relation matrices, in which mutual relations between users and items are denoted in an alternative process of “liking or not”. A technique for sequential co-cluster extraction from rectangular relational data is given by combining the structural balancing-based user-item clustering method with sequential fuzzy cluster extraction appraoch. Then, the tecunique is applied to the collaborative filtering problem, in which some items may be shared by several user clusters.

An empirical comparison of Item Response Theory and Classical Test Theory

Directory of Open Access Journals (Sweden)

Špela Progar

2008-11-01

Full Text Available Based on nonlinear models between the measured latent variable and the item response, item response theory (IRT enables independent estimation of item and person parameters and local estimation of measurement error. These properties of IRT are also the main theoretical advantages of IRT over classical test theory (CTT. Empirical evidence, however, often failed to discover consistent differences between IRT and CTT parameters and between invariance measures of CTT and IRT parameter estimates. In this empirical study a real data set from the Third International Mathematics and Science Study (TIMSS 1995 was used to address the following questions: (1 How comparable are CTT and IRT based item and person parameters? (2 How invariant are CTT and IRT based item parameters across different participant groups? (3 How invariant are CTT and IRT based item and person parameters across different item sets? The findings indicate that the CTT and the IRT item/person parameters are very comparable, that the CTT and the IRT item parameters show similar invariance property when estimated across different groups of participants, that the IRT person parameters are more invariant across different item sets, and that the CTT item parameters are at least as much invariant in different item sets as the IRT item parameters. The results furthermore demonstrate that, with regards to the invariance property, IRT item/person parameters are in general empirically superior to CTT parameters, but only if the appropriate IRT model is used for modelling the data.

Item difficulty of multiple choice tests dependant on different item response formats – An experiment in fundamental research on psychological assessment

Directory of Open Access Journals (Sweden)

KLAUS D. KUBINGER

2007-12-01

Full Text Available Multiple choice response formats are problematical as an item is often scored as solved simply because the test-taker is a lucky guesser. Instead of applying pertinent IRT models which take guessing effects into account, a pragmatic approach of re-conceptualizing multiple choice response formats to reduce the chance of lucky guessing is considered. This paper compares the free response format with two different multiple choice formats. A common multiple choice format with a single correct response option and five distractors (“1 of 6” is used, as well as a multiple choice format with five response options, of which any number of the five is correct and the item is only scored as mastered if all the correct response options and none of the wrong ones are marked (“x of 5”. An experiment was designed, using pairs of items with exactly the same content but different response formats. 173 test-takers were randomly assigned to two test booklets of 150 items altogether. Rasch model analyses adduced a fitting item pool, after the deletion of 39 items. The resulting item difficulty parameters were used for the comparison of the different formats. The multiple choice format “1 of 6” differs significantly from “x of 5”, with a relative effect of 1.63, while the multiple choice format “x of 5” does not significantly differ from the free response format. Therefore, the lower degree of difficulty of items with the “1 of 6” multiple choice format is an indicator of relevant guessing effects. In contrast the “x of 5” multiple choice format can be seen as an appropriate substitute for free response format.

Attention restores discrete items to visual short-term memory.

Science.gov (United States)

Murray, Alexandra M; Nobre, Anna C; Clark, Ian A; Cravo, André M; Stokes, Mark G

2013-04-01

When a memory is forgotten, is it lost forever? Our study shows that selective attention can restore forgotten items to visual short-term memory (VSTM). In our two experiments, all stimuli presented in a memory array were designed to be equally task relevant during encoding. During the retention interval, however, participants were sometimes given a cue predicting which of the memory items would be probed at the end of the delay. This shift in task relevance improved recall for that item. We found that this type of cuing improved recall for items that otherwise would have been irretrievable, providing critical evidence that attention can restore forgotten information to VSTM. Psychophysical modeling of memory performance has confirmed that restoration of information in VSTM increases the probability that the cued item is available for recall but does not improve the representational quality of the memory. We further suggest that attention can restore discrete items to VSTM.

Australian Chemistry Test Item Bank: Years 11 & 12. Volume 1.

Science.gov (United States)

Commons, C., Ed.; Martin, P., Ed.

Volume 1 of the Australian Chemistry Test Item Bank, consisting of two volumes, contains nearly 2000 multiple-choice items related to the chemistry taught in Year 11 and Year 12 courses in Australia. Items which were written during 1979 and 1980 were initially published in the "ACER Chemistry Test Item Collection" and in the "ACER…

Evaluating the quality of medical multiple-choice items created with automated processes.

Science.gov (United States)

Gierl, Mark J; Lai, Hollis

2013-07-01

Computerised assessment raises formidable challenges because it requires large numbers of test items. Automatic item generation (AIG) can help address this test development problem because it yields large numbers of new items both quickly and efficiently. To date, however, the quality of the items produced using a generative approach has not been evaluated. The purpose of this study was to determine whether automatic processes yield items that meet standards of quality that are appropriate for medical testing. Quality was evaluated firstly by subjecting items created using both AIG and traditional processes to rating by a four-member expert medical panel using indicators of multiple-choice item quality, and secondly by asking the panellists to identify which items were developed using AIG in a blind review. Fifteen items from the domain of therapeutics were created in three different experimental test development conditions. The first 15 items were created by content specialists using traditional test development methods (Group 1 Traditional). The second 15 items were created by the same content specialists using AIG methods (Group 1 AIG). The third 15 items were created by a new group of content specialists using traditional methods (Group 2 Traditional). These 45 items were then evaluated for quality by a four-member panel of medical experts and were subsequently categorised as either Traditional or AIG items. Three outcomes were reported: (i) the items produced using traditional and AIG processes were comparable on seven of eight indicators of multiple-choice item quality; (ii) AIG items can be differentiated from Traditional items by the quality of their distractors, and (iii) the overall predictive accuracy of the four expert medical panellists was 42%. Items generated by AIG methods are, for the most part, equivalent to traditionally developed items from the perspective of expert medical reviewers. While the AIG method produced comparatively fewer plausible

An Investigation of Item Type in a Standards-Based Assessment.

Directory of Open Access Journals (Sweden)

Liz Hollingworth

2007-12-01

Full Text Available Large-scale state assessment programs use both multiple-choice and open-ended items on tests for accountability purposes. Certainly, there is an intuitive belief among some educators and policy makers that open-ended items measure something different than multiple-choice items. This study examined two item formats in custom-built, standards-based tests of achievement in Reading and Mathematics at grades 3-8. In this paper, we raise questions about the value of including open-ended items, given scoring costs, time constraints, and the higher probability of missing data from test-takers.

Measuring the nursing work environment: translation and psychometric evaluation of the Essentials of Magnetism.

Science.gov (United States)

de Brouwer, B J M; Kaljouw, M J; Kramer, M; Schmalenberg, C; van Achterberg, T

2014-03-01

Translate the Essentials of Magnetism II© (EOMII; Dutch Nurses' Association, Utrecht, The Netherlands) and assess its psychometric properties in a culture different from its origin. The EOMII, developed in the USA, measures the extent to which organizations/units provide healthy, productive and satisfying work environments. As many healthcare organizations are facing difficulties in attracting and retaining staff nurses, the EOMII provides the opportunity to assess the health and effectiveness of work environments. A three-phased (respectively N = 13, N = 74 and N = 2542) combined descriptive and correlational design was undertaken for translation and evaluation validity and psychometric qualities of the EOMII for Dutch hospitals (December 2009-January 2010). We performed forward-backward translation, face and content validation via cross-sectional survey research, and semi-structured interviews on relevance, clarity, and recognizability of instruments' items. Psychometric testing included principal component analysis using varimax rotation, item-total statistics, and reliability in terms of internal consistency (Cronbach's α) for the total scale and its subscales. Face validity was confirmed. Items were recognizable, relevant and clear. Confirmatory factor analysis indicated that five of eight subscales formed clear factors. Three original subscales contained two factors. Item-total correlations ranged from 0.43 to 0.83. One item correlated weakly (0.24) with its subscale. Cronbach's α for the entire scale was 0.92 and ranged from 0.58 to 0.92 for eight subscales. Dutch-translated EOMII (D-EOMII) demonstrated acceptable reliability and validity for assessing hospital staff nurses' work environment. The D-EOMII can be useful and effective in identifying areas in which change is needed for a hospital to pursue an excellent work environment that attracts and retains well-qualified nurses. © 2013 International Council of Nurses.

Instemmingsgeneigdheid en verskillende item- en responsformate in 'n gesommeerde selfbeoordelingskaal

Directory of Open Access Journals (Sweden)

Nadene Hanekom

1998-06-01

Full Text Available This study examines the degree of acquiescence present when the item and response formats of a summated rating scale are varied. It is often recommended that acquiescence response bias in rating scales may be controlled by using both positively and negatively worded items. Such items are generally worded in the Likert-type format of statements. The purpose of the study was to establish whether items in question format would result in a smaller degree of acquiescence than items worded as statements. the response format was also varied (five- and seven-point options to determine whether this would influence the reliability and degree of acquiescence in the scales. A twenty-item Locus of Control (LC questionnaire was used, but each item was complemented by its opposite, resulting in 40 items. The subjects, divided randomly into two groups, were second year students who had to complete four versions of the questionnaire, plus a shortened version of Bass's scale for measuring acquiescence. The LC version were questions or statements each combined with a five- or seven-point respons format. Partial counterbalancing was introduced by testing on two separate occasions, presenting the tests to the two groups in the opposite order. The degree of acquiescence was assessed by correlating the items with their opposite, and by correlating scores on each version with scores on the acquiescence questionnaire. No major difference were found between the various item and response format in relation to acquiescence. Opsomming Hierdie ondersoek is uitgevoer om te bepaal of die mate van instemmingsgeneigdheid deur die item- en responsformaat van 'n gesommeerde selfbeoordelingskaal beinvloed word. Daar word dikwels aanbeveel dat die gebruik van positief- sowel as negatiefbewoorde items in 'n vraelys instemmingsgeneigdheid beperk. Suike items word gewoonlik in die tradisionele Likertformaat as stellings geformuleer. Die doel van die ondersoek was om te bepaal of items

Writing, Evaluating and Assessing Data Response Items in Economics.

Science.gov (United States)

Trotman-Dickenson, D. I.

1989-01-01

Describes some of the problems in writing data response items in economics for use by A Level and General Certificate of Secondary Education (GCSE) students. Examines the experience of two series of workshops on writing items, evaluating them and assessing responses from schools. Offers suggestions for producing packages of data response items as…

Three Modeling Applications to Promote Automatic Item Generation for Examinations in Dentistry.

Science.gov (United States)

Lai, Hollis; Gierl, Mark J; Byrne, B Ellen; Spielman, Andrew I; Waldschmidt, David M

2016-03-01

Test items created for dentistry examinations are often individually written by content experts. This approach to item development is expensive because it requires the time and effort of many content experts but yields relatively few items. The aim of this study was to describe and illustrate how items can be generated using a systematic approach. Automatic item generation (AIG) is an alternative method that allows a small number of content experts to produce large numbers of items by integrating their domain expertise with computer technology. This article describes and illustrates how three modeling approaches to item content-item cloning, cognitive modeling, and image-anchored modeling-can be used to generate large numbers of multiple-choice test items for examinations in dentistry. Test items can be generated by combining the expertise of two content specialists with technology supported by AIG. A total of 5,467 new items were created during this study. From substitution of item content, to modeling appropriate responses based upon a cognitive model of correct responses, to generating items linked to specific graphical findings, AIG has the potential for meeting increasing demands for test items. Further, the methods described in this study can be generalized and applied to many other item types. Future research applications for AIG in dental education are discussed.

Separating relational from item load effects in paired recognition: temporoparietal and middle frontal gyral activity with increased associates, but not items during encoding and retention.

Science.gov (United States)

Phillips, Steven; Niki, Kazuhisa

2002-10-01

Working memory is affected by items stored and the relations between them. However, separating these factors has been difficult, because increased items usually accompany increased associations/relations. Hence, some have argued, relational effects are reducible to item effects. We overcome this problem by manipulating index length: the fewest number of item positions at which there is a unique item, or tuple of items (if length >1), for every instance in the relational (memory) set. Longer indexes imply greater similarity (number of shared items) between instances and higher load on encoding processes. Subjects were given lists of study pairs and asked to make a recognition judgement. The number of unique items and index length in the three list conditions were: (1) AB, CD: four/one; (2) AB, CD, EF: six/one; and (3) AB, AD, CB: four/two, respectively. Japanese letters were used in Experiments 1 (kanji-ideograms) and 2 (hiragana-phonograms); numbers in Experiment 3; and shapes generated from Fourier descriptors in Experiment 4. Across all materials, right dominant temporoparietal and middle frontal gyral activity was found with increased index length, but not items during study. In Experiment 5, a longer delay was used to isolate retention effects in the absence of visual stimuli. Increased left hemispheric activity was observed in the precuneus, middle frontal gyrus, and superior temporal gyrus with increased index length for the delay period. These results show that relational load is not reducible to item load.

Rats Remember Items in Context Using Episodic Memory.

Science.gov (United States)

Panoz-Brown, Danielle; Corbin, Hannah E; Dalecki, Stefan J; Gentry, Meredith; Brotheridge, Sydney; Sluka, Christina M; Wu, Jie-En; Crystal, Jonathon D

2016-10-24

Vivid episodic memories in people have been characterized as the replay of unique events in sequential order [1-3]. Animal models of episodic memory have successfully documented episodic memory of a single event (e.g., [4-8]). However, a fundamental feature of episodic memory in people is that it involves multiple events, and notably, episodic memory impairments in human diseases are not limited to a single event. Critically, it is not known whether animals remember many unique events using episodic memory. Here, we show that rats remember many unique events and the contexts in which the events occurred using episodic memory. We used an olfactory memory assessment in which new (but not old) odors were rewarded using 32 items. Rats were presented with 16 odors in one context and the same odors in a second context. To attain high accuracy, the rats needed to remember item in context because each odor was rewarded as a new item in each context. The demands on item-in-context memory were varied by assessing memory with 2, 3, 5, or 15 unpredictable transitions between contexts, and item-in-context memory survived a 45 min retention interval challenge. When the memory of item in context was put in conflict with non-episodic familiarity cues, rats relied on item in context using episodic memory. Our findings suggest that rats remember multiple unique events and the contexts in which these events occurred using episodic memory and support the view that rats may be used to model fundamental aspects of human cognition. Copyright © 2016 Elsevier Ltd. All rights reserved.

The effect of non-recurring items on analysts’ earnings forecasts

Directory of Open Access Journals (Sweden)

Nan Li

2018-03-01

Full Text Available This article discusses the effects of non-recurring profits and losses on statement users’ decision-making processes from the perspective of securities analysts. We examine the relationship between analysts’ forecast revisions and firms’ non-recurring earnings. We find that 1 non-recurring gains and losses can influence analysts’ earnings forecast revision; 2 compared with non-recurring items resulting from policy changes, analysts are more concerned about those attributed to changes in business scope; 3 if listed companies use non-recurring items to turn losses into gains during earnings management, it will weaken the effects of non-recurring items on analysts’ earnings forecast revision. The results suggest that non-recurring items that result from changes in business scope incorporate information that users need for the future operation of the business. This article verifies the information relevance of non-recurring items and provides evidence for the necessity of non-recurring item disclosure. Keywords: Non-recurring items, Earnings forecasts, Revisions

Mediate gamma radiation effects on some packaged food items

International Nuclear Information System (INIS)

Inamura, Patricia Y.; Uehara, Vanessa B.; Teixeira, Christian A.H.M.; Mastro, Nelida L. del

2012-01-01

For most of prepackaged foods a 10 kGy radiation dose is considered the maximum dose needed; however, the commercially available and practically accepted packaging materials must be suitable for such application. This work describes the application of ionizing radiation on several packaged food items, using 5 dehydrated food items, 5 ready-to-eat meals and 5 ready-to-eat food items irradiated in a 60 Co gamma source with a 3 kGy dose. The quality evaluation of the irradiated samples was performed 2 and 8 months after irradiation. Microbiological analysis (bacteria, fungus and yeast load) was performed. The sensory characteristics were established for appearance, aroma, texture and flavor attributes were also established. From these data, the acceptability of all irradiated items was obtained. All ready-to-eat food items assayed like manioc flour, some pâtés and blocks of raw brown sugar and most of ready-to-eat meals like sausages and chicken with legumes were considered acceptable for microbial and sensory characteristics. On the other hand, the dehydrated food items chosen for this study, such as dehydrated bacon potatoes or pea soups were not accepted by the sensory analysis. A careful dose choice and special irradiation conditions must be used in order to achieve sensory acceptability needed for the commercialization of specific irradiated food items. - Highlights: ► We applied gamma radiation on several kinds of packaged food items. ► Microbiological and sensory analyses were performed 2 and 8 months after irradiation. ► All ready-to-eat food items assayed were approved for microbial and sensory characteristics. ► Most ready-to-eat meals like sausages and chicken with legumes were also acceptable. ► Dehydrated bacon potatoes or pea soups were considered not acceptable.

41 CFR 101-27.209-1 - GSA stock items.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true GSA stock items. 101-27.209-1 Section 101-27.209-1 Public Contracts and Property Management Federal Property Management...-Management of Shelf-Life Materials § 101-27.209-1 GSA stock items. Shelf-life items that meet the criteria...

12 CFR 210.8 - Presenting noncash items for acceptance.

Science.gov (United States)

2010-01-01

... for acceptance. (a) A Reserve Bank or a subsequent collecting bank may, if instructed by the sender, present a noncash item for acceptance in any manner authorized by law if— (1) The item provides that it... 12 Banks and Banking 2 2010-01-01 2010-01-01 false Presenting noncash items for acceptance. 210.8...

Brief Sensation Seeking Scale: Latent structure of 8-item and 4-item versions in Peruvian adolescents.

Science.gov (United States)

Merino-Soto, Cesar; Salas Blas, Edwin

2018-01-01

This research intended to validate two brief scales of sensations seeking with Peruvian adolescents: the eight item scale (BSSS8; Hoyle, Stephenson, Palmgreen, Lorch, y Donohew, 2002) and the four item scale (BSSS4; Stephenson, Hoyle, Slater, y Palmgreen, 2003). Questionnaires were administered to 618 voluntary participants, with an average age of 13.6 years, from different levels of high school, state and private school in a district in the south of Lima. It analyzed the internal structure of both short versions using three models: a) unidimensional (M1), b) oblique or related dimensions (M2), and c) the bifactor model (M3). Results show that both instruments have a single dimension which best represents the variability of the items; a fact that can be explained both by the complexity of the concept and by the small number of items representing each factor, which is more noticeable in the BSSS4. Reliability is within levels found by previous studies: alpha: .745 = BSSS8 and BSSS4 =. 643; omega coefficient: .747 in BSSS8 and .651 in BSSS4. These are considered suitable for the type of instruments studied. Based on the correlation between the two instruments, it was found that there are satisfactory levels of equivalence between the BSSS8 and BSSS4. However, it is recommended that the BSSS4 is mainly used for research and for the purpose of describing populations.

Item response theory analysis of the mechanics baseline test

Science.gov (United States)

Cardamone, Caroline N.; Abbott, Jonathan E.; Rayyan, Saif; Seaton, Daniel T.; Pawl, Andrew; Pritchard, David E.

2012-02-01

Item response theory is useful in both the development and evaluation of assessments and in computing standardized measures of student performance. In item response theory, individual parameters (difficulty, discrimination) for each item or question are fit by item response models. These parameters provide a means for evaluating a test and offer a better measure of student skill than a raw test score, because each skill calculation considers not only the number of questions answered correctly, but the individual properties of all questions answered. Here, we present the results from an analysis of the Mechanics Baseline Test given at MIT during 2005-2010. Using the item parameters, we identify questions on the Mechanics Baseline Test that are not effective in discriminating between MIT students of different abilities. We show that a limited subset of the highest quality questions on the Mechanics Baseline Test returns accurate measures of student skill. We compare student skills as determined by item response theory to the more traditional measurement of the raw score and show that a comparable measure of learning gain can be computed.

Item Response Theory Analysis of the Psychopathic Personality Inventory-Revised.

Science.gov (United States)

Eichenbaum, Alexander E; Marcus, David K; French, Brian F

2017-06-01

This study examined item and scale functioning in the Psychopathic Personality Inventory-Revised (PPI-R) using an item response theory analysis. PPI-R protocols from 1,052 college student participants (348 male, 704 female) were analyzed. Analyses were conducted on the 131 self-report items comprising the PPI-R's eight content scales, using a graded response model. Scales collected a majority of their information about respondents possessing higher than average levels of the traits being measured. Each scale contained at least some items that evidenced limited ability to differentiate between respondents with differing levels of the trait being measured. Moreover, 80 items (61.1%) yielded significantly different responses between men and women presumably possessing similar levels of the trait being measured. Item performance was also influenced by the scoring format (directly scored vs. reverse-scored) of the items. Overall, the results suggest that the PPI-R, despite identifying psychopathic personality traits in individuals possessing high levels of those traits, may not identify these traits equally well for men and women, and scores are likely influenced by the scoring format of the individual item and scale.

26 CFR 301.6231(a)(3)-1 - Partnership items.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 18 2010-04-01 2010-04-01 false Partnership items. 301.6231(a)(3)-1 Section 301... Partnership items. (a) In general. For purposes of subtitle F of the Internal Revenue Code of 1954, the following items which are required to be taken into account for the taxable year of a partnership under...

Item Response Theory Models for Performance Decline during Testing

Science.gov (United States)

Jin, Kuan-Yu; Wang, Wen-Chung

2014-01-01

Sometimes, test-takers may not be able to attempt all items to the best of their ability (with full effort) due to personal factors (e.g., low motivation) or testing conditions (e.g., time limit), resulting in poor performances on certain items, especially those located toward the end of a test. Standard item response theory (IRT) models fail to…

Identifying predictors of physics item difficulty: A linear regression approach

Science.gov (United States)

Mesic, Vanes; Muratovic, Hasnija

2011-06-01

Large-scale assessments of student achievement in physics are often approached with an intention to discriminate students based on the attained level of their physics competencies. Therefore, for purposes of test design, it is important that items display an acceptable discriminatory behavior. To that end, it is recommended to avoid extraordinary difficult and very easy items. Knowing the factors that influence physics item difficulty makes it possible to model the item difficulty even before the first pilot study is conducted. Thus, by identifying predictors of physics item difficulty, we can improve the test-design process. Furthermore, we get additional qualitative feedback regarding the basic aspects of student cognitive achievement in physics that are directly responsible for the obtained, quantitative test results. In this study, we conducted a secondary analysis of data that came from two large-scale assessments of student physics achievement at the end of compulsory education in Bosnia and Herzegovina. Foremost, we explored the concept of “physics competence” and performed a content analysis of 123 physics items that were included within the above-mentioned assessments. Thereafter, an item database was created. Items were described by variables which reflect some basic cognitive aspects of physics competence. For each of the assessments, Rasch item difficulties were calculated in separate analyses. In order to make the item difficulties from different assessments comparable, a virtual test equating procedure had to be implemented. Finally, a regression model of physics item difficulty was created. It has been shown that 61.2% of item difficulty variance can be explained by factors which reflect the automaticity, complexity, and modality of the knowledge structure that is relevant for generating the most probable correct solution, as well as by the divergence of required thinking and interference effects between intuitive and formal physics knowledge

Identifying predictors of physics item difficulty: A linear regression approach

Directory of Open Access Journals (Sweden)

Hasnija Muratovic

2011-06-01

Full Text Available Large-scale assessments of student achievement in physics are often approached with an intention to discriminate students based on the attained level of their physics competencies. Therefore, for purposes of test design, it is important that items display an acceptable discriminatory behavior. To that end, it is recommended to avoid extraordinary difficult and very easy items. Knowing the factors that influence physics item difficulty makes it possible to model the item difficulty even before the first pilot study is conducted. Thus, by identifying predictors of physics item difficulty, we can improve the test-design process. Furthermore, we get additional qualitative feedback regarding the basic aspects of student cognitive achievement in physics that are directly responsible for the obtained, quantitative test results. In this study, we conducted a secondary analysis of data that came from two large-scale assessments of student physics achievement at the end of compulsory education in Bosnia and Herzegovina. Foremost, we explored the concept of “physics competence” and performed a content analysis of 123 physics items that were included within the above-mentioned assessments. Thereafter, an item database was created. Items were described by variables which reflect some basic cognitive aspects of physics competence. For each of the assessments, Rasch item difficulties were calculated in separate analyses. In order to make the item difficulties from different assessments comparable, a virtual test equating procedure had to be implemented. Finally, a regression model of physics item difficulty was created. It has been shown that 61.2% of item difficulty variance can be explained by factors which reflect the automaticity, complexity, and modality of the knowledge structure that is relevant for generating the most probable correct solution, as well as by the divergence of required thinking and interference effects between intuitive and formal

Item response theory analysis of the Pain Self-Efficacy Questionnaire.

Science.gov (United States)

Costa, Daniel S J; Asghari, Ali; Nicholas, Michael K

2017-01-01

The Pain Self-Efficacy Questionnaire (PSEQ) is a 10-item instrument designed to assess the extent to which a person in pain believes s/he is able to accomplish various activities despite their pain. There is strong evidence for the validity and reliability of both the full-length PSEQ and a 2-item version. The purpose of this study is to further examine the properties of the PSEQ using an item response theory (IRT) approach. We used the two-parameter graded response model to examine the category probability curves, and location and discrimination parameters of the 10 PSEQ items. In item response theory, responses to a set of items are assumed to be probabilistically determined by a latent (unobserved) variable. In the graded-response model specifically, item response threshold (the value of the latent variable for which adjacent response categories are equally likely) and discrimination parameters are estimated for each item. Participants were 1511 mixed, chronic pain patients attending for initial assessment at a tertiary pain management centre. All items except item 7 ('I can cope with my pain without medication') performed well in IRT analysis, and the category probability curves suggested that participants used the 7-point response scale consistently. Items 6 ('I can still do many of the things I enjoy doing, such as hobbies or leisure activity, despite pain'), 8 ('I can still accomplish most of my goals in life, despite the pain') and 9 ('I can live a normal lifestyle, despite the pain') captured higher levels of the latent variable with greater precision. The results from this IRT analysis add to the body of evidence based on classical test theory illustrating the strong psychometric properties of the PSEQ. Despite the relatively poor performance of Item 7, its clinical utility warrants its retention in the questionnaire. The strong psychometric properties of the PSEQ support its use as an effective tool for assessing self-efficacy in people with pain

Development of six PROMIS pediatrics proxy-report item banks.

Science.gov (United States)

Irwin, Debra E; Gross, Heather E; Stucky, Brian D; Thissen, David; DeWitt, Esi Morgan; Lai, Jin Shei; Amtmann, Dagmar; Khastou, Leyla; Varni, James W; DeWalt, Darren A

2012-02-22

Pediatric self-report should be considered the standard for measuring patient reported outcomes (PRO) among children. However, circumstances exist when the child is too young, cognitively impaired, or too ill to complete a PRO instrument and a proxy-report is needed. This paper describes the development process including the proxy cognitive interviews and large-field-test survey methods and sample characteristics employed to produce item parameters for the Patient Reported Outcomes Measurement Information System (PROMIS) pediatric proxy-report item banks. The PROMIS pediatric self-report items were converted into proxy-report items before undergoing cognitive interviews. These items covered six domains (physical function, emotional distress, social peer relationships, fatigue, pain interference, and asthma impact). Caregivers (n = 25) of children ages of 5 and 17 years provided qualitative feedback on proxy-report items to assess any major issues with these items. From May 2008 to March 2009, the large-scale survey enrolled children ages 8-17 years to complete the self-report version and caregivers to complete the proxy-report version of the survey (n = 1548 dyads). Caregivers of children ages 5 to 7 years completed the proxy report survey (n = 432). In addition, caregivers completed other proxy instruments, PedsQL™ 4.0 Generic Core Scales Parent Proxy-Report version, PedsQL™ Asthma Module Parent Proxy-Report version, and KIDSCREEN Parent-Proxy-52. Item content was well understood by proxies and did not require item revisions but some proxies clearly noted that determining an answer on behalf of their child was difficult for some items. Dyads and caregivers of children ages 5-17 years old were enrolled in the large-scale testing. The majority were female (85%), married (70%), Caucasian (64%) and had at least a high school education (94%). Approximately 50% had children with a chronic health condition, primarily asthma, which was diagnosed or treated within 6

Suspect/Counterfeit Items Information Guide for Subcontractors/Suppliers

Energy Technology Data Exchange (ETDEWEB)

Tessmar, Nancy D. [Los Alamos National Laboratory; Salazar, Michael J. [Los Alamos National Laboratory

2012-09-18

Counterfeiting of industrial and commercial grade items is an international problem that places worker safety, program objectives, expensive equipment, and security at risk. In order to prevent the introduction of Suspect/Counterfeit Items (S/CI), this information sheet is being made available as a guide to assist in the implementation of S/CI awareness and controls, in conjunction with subcontractor's/supplier's quality assurance programs. When it comes to counterfeit goods, including industrial materials, items, and equipment, no market is immune. Some manufactures have been known to misrepresent their products and intentionally use inferior materials and processes to manufacture substandard items, whose properties can significantly cart from established standards and specifications. These substandard items termed by the Department of Energy (DOE) as S/CI, pose immediate and potential threats to the safety of DOE and contractor workers, the public, and the environment. Failure of certain systems and processes caused by an S/CI could also have national security implications at Los Alamos National Laboratory (LANL). Nuclear Safety Rules (federal Laws), DOE Orders, and other regulations set forth requirements for DOE contractors to implement effective controls to assure that items and services meet specified requirements. This includes techniques to implement and thereby minimizing the potential threat of entry of S/CI to LANL. As a qualified supplier of goods or services to the LANL, your company will be required to establish and maintain effective controls to prevent the introduction of S/CI to LANL. This will require that your company warrant that all items (including their subassemblies, components, and parts) sold to LANL are genuine (i.e. not counterfeit), new, and unused, and conform to the requirements of the LANL purchase orders/contracts unless otherwise approved in writing to the Los Alamos National Security (LANS) contract administrator

Combining item and bulk material loss-detection uncertainties

International Nuclear Information System (INIS)

Eggers, R.F.

1982-01-01

Loss detection requirements, such as five formula kilograms with 99% probability of detection, which apply to the sum of losses from material in both item and bulk form, constitute a special problem for the nuclear material statistician. Requirements of this type are included in the Material Control and Accounting Reform Amendments described in the Advance Notice of Proposed Rule Making (Federal Register, 46(175):45144-46151). Attribute test sampling of items is the method used to detect gross defects in the inventory of items in a given control unit. Attribute sampling plans are designed to detect a loss of a specificed goal quantity of material with a given probability. In contrast to the methods and statistical models used for item loss detection, bulk material loss detection requires all the material entering and leaving a control unit to be measured and the calculation of a loss estimator that will be tested against an appropriate alarm threshold. The alarm threshold is determined from an estimate of the error inherent in the components of the loss estimator. In this paper a simple grahical method of evaluating the combined capabilities of bulk material loss detection methods and item attribute testing procedures will be described. Quantitative results will be given for several cases, indicating how a decrease in the precision of the item loss detection method tends to force an increase in the precision of the bulk loss detection procedure in order to meet the overall detection requirement. 4 figures

Individuals with knee impairments identify items in need of clarification in the Patient Reported Outcomes Measurement Information System (PROMIS®) pain interference and physical function item banks - a qualitative study.

Science.gov (United States)

Lynch, Andrew D; Dodds, Nathan E; Yu, Lan; Pilkonis, Paul A; Irrgang, James J

2016-05-11

The content and wording of the Patient Reported Outcome Measurement Information System (PROMIS) Physical Function and Pain Interference item banks have not been qualitatively assessed by individuals with knee joint impairments. The purpose of this investigation was to identify items in the PROMIS Physical Function and Pain Interference Item Banks that are irrelevant, unclear, or otherwise difficult to respond to for individuals with impairment of the knee and to suggest modifications based on cognitive interviews. Twenty-nine individuals with knee joint impairments qualitatively assessed items in the Pain Interference and Physical Function Item Banks in a mixed-methods cognitive interview. Field notes were analyzed to identify themes and frequency counts were calculated to identify items not relevant to individuals with knee joint impairments. Issues with clarity were identified in 23 items in the Physical Function Item Bank, resulting in the creation of 43 new or modified items, typically changing words within the item to be clearer. Interpretation issues included whether or not the knee joint played a significant role in overall health and age/gender differences in items. One quarter of the original items (31 of 124) in the Physical Function Item Bank were identified as irrelevant to the knee joint. All 41 items in the Pain Interference Item Bank were identified as clear, although individuals without significant pain substituted other symptoms which interfered with their life. The Physical Function Item Bank would benefit from additional items that are relevant to individuals with knee joint impairments and, by extension, to other lower extremity impairments. Several issues in clarity were identified that are likely to be present in other patient cohorts as well.

Detection of person misfit in computerized adaptive tests with polytomous items

NARCIS (Netherlands)

van Krimpen-Stoop, Edith; Meijer, R.R.

2000-01-01

Item scores that do not fit an assumed item response theory model may cause the latent trait value to be estimated inaccurately. For computerized adaptive tests (CAT) with dichotomous items, several person-fit statistics for detecting nonfitting item score patterns have been proposed. Both for

Binary classification of items of interest in a repeatable process

Science.gov (United States)

Abell, Jeffrey A.; Spicer, John Patrick; Wincek, Michael Anthony; Wang, Hui; Chakraborty, Debejyo

2014-06-24

A system includes host and learning machines in electrical communication with sensors positioned with respect to an item of interest, e.g., a weld, and memory. The host executes instructions from memory to predict a binary quality status of the item. The learning machine receives signals from the sensor(s), identifies candidate features, and extracts features from the candidates that are more predictive of the binary quality status relative to other candidate features. The learning machine maps the extracted features to a dimensional space that includes most of the items from a passing binary class and excludes all or most of the items from a failing binary class. The host also compares the received signals for a subsequent item of interest to the dimensional space to thereby predict, in real time, the binary quality status of the subsequent item of interest.

The Dif Identification in Constructed Response Items Using Partial Credit Model

Directory of Open Access Journals (Sweden)

Heri Retnawati

2017-10-01

Full Text Available The study was to identify the load, the type and the significance of differential item functioning (DIF in constructed response item using the partial credit model (PCM. The data in the study were the students’ instruments and the students’ responses toward the PISA-like test items that had been completed by 386 ninth grade students and 460 tenth grade students who had been about 15 years old in the Province of Yogyakarta Special Region in Indonesia. The analysis toward the item characteristics through the student categorization based on their class was conducted toward the PCM using CONQUEST software. Furthermore, by applying these items characteristics, the researcher draw the category response function (CRF graphic in order to identify whether the type of DIF content had been in uniform or non-uniform. The significance of DIF was identified by comparing the discrepancy between the difficulty level parameter and the error in the CONQUEST output results. The results of the analysis showed that from 18 items that had been analyzed there were 4 items which had not been identified load DIF, there were 5 items that had been identified containing DIF but not statistically significant and there were 9 items that had been identified containing DIF significantly. The causes of items containing DIF were discussed.

Grouping of Items in Mobile Web Questionnaires

Science.gov (United States)

Mavletova, Aigul; Couper, Mick P.

2016-01-01

There is some evidence that a scrolling design may reduce breakoffs in mobile web surveys compared to a paging design, but there is little empirical evidence to guide the choice of the optimal number of items per page. We investigate the effect of the number of items presented on a page on data quality in two types of questionnaires: with or…

Polytomous latent scales for the investigation of the ordering of items

NARCIS (Netherlands)

Ligtvoet, R.; van der Ark, L.A.; Bergsma, W. P.; Sijtsma, K.

2011-01-01

We propose three latent scales within the framework of nonparametric item response theory for polytomously scored items. Latent scales are models that imply an invariant item ordering, meaning that the order of the items is the same for each measurement value on the latent scale. This ordering

Computerized adaptive testing item selection in computerized adaptive learning systems

NARCIS (Netherlands)

Eggen, Theodorus Johannes Hendrikus Maria; Eggen, T.J.H.M.; Veldkamp, B.P.

2012-01-01

Item selection methods traditionally developed for computerized adaptive testing (CAT) are explored for their usefulness in item-based computerized adaptive learning (CAL) systems. While in CAT Fisher information-based selection is optimal, for recovering learning populations in CAL systems item

Optimal item discrimination and maximum information for logistic IRT models

NARCIS (Netherlands)

Veerkamp, W.J.J.; Veerkamp, Wim J.J.; Berger, Martijn P.F.; Berger, Martijn

1999-01-01

Items with the highest discrimination parameter values in a logistic item response theory model do not necessarily give maximum information. This paper derives discrimination parameter values, as functions of the guessing parameter and distances between person parameters and item difficulty, that

Data Visualization of Item-Total Correlation by Median Smoothing

Directory of Open Access Journals (Sweden)

Chong Ho Yu

2016-02-01

Full Text Available This paper aims to illustrate how data visualization could be utilized to identify errors prior to modeling, using an example with multi-dimensional item response theory (MIRT. MIRT combines item response theory and factor analysis to identify a psychometric model that investigates two or more latent traits. While it may seem convenient to accomplish two tasks by employing one procedure, users should be cautious of problematic items that affect both factor analysis and IRT. When sample sizes are extremely large, reliability analyses can misidentify even random numbers as meaningful patterns. Data visualization, such as median smoothing, can be used to identify problematic items in preliminary data cleaning.

Deliberate ambiguity in a finite environment: The urban ecology of artificial items

Directory of Open Access Journals (Sweden)

Abraham Akkerman

2000-01-01

Full Text Available A distinction is made between visual declaration and virtual usage of artificial items within a physical environment, such as a street. Visual declaration is a formal pictorial designation, or a function, e.g. “decoration,” of an item, such as a “planter.” Virtual usage refers to the item when it is used in lieu of another item. The formal designation, “sitting,” customarily designated to an item such as “bench,” could also be a virtual usage of the item “planter.” The question asked is, “What is the relationship between items, given their formal, visual declaration and their informal, virtual, usage?” An artificial item, according to its visual declaration, is referred to as a ‘visual’ or ‘real item’. Each visual item has the property of being used as another item by virtue of its undeclared usage. Pending on the item's design and configuration, a visual item can be then substituted for another visual item. An artificial item, thus, attains deliberate ambiguity between its formal designation and its virtual usage. This ambiguity between visual declaration and virtual usage can be quantified. Within the full domain of n possible usages, this relationship can be conveniently presented in a nonnegative matrix. It is shown that the inverse of this matrix belongs to a class of well-known matrices. This being the case, the relationship between visual and virtual properties of items within the environment can be formalized. The formalization throws further light on the emerging opportunities in streetscape design.

Comparing Two Versions of the MEOCS Using Differential Item Functioning

National Research Council Canada - National Science Library

Truhon, Stephen

2003-01-01

...) from item response theory (IRT). DIF was found for the majority of the 40 items examined, although in many cases the DIF indicated improvements in the revised items. Implications for these scales and for the use of IRT with the MEOCS are discussed.

A simple and fast item selection procedure for adaptive testing

NARCIS (Netherlands)

Veerkamp, W.J.J.; Veerkamp, Wim J.J.; Berger, Martijn; Berger, Martijn P.F.

1994-01-01

Items with the highest discrimination parameter values in a logistic item response theory (IRT) model do not necessarily give maximum information. This paper shows which discrimination parameter values (as a function of the guessing parameter and the distance between person ability and item

Comparison of Alternate and Original Items on the Montreal Cognitive Assessment.

Science.gov (United States)

Lebedeva, Elena; Huang, Mei; Koski, Lisa

2016-03-01

The Montreal Cognitive Assessment (MoCA) is a screening tool for mild cognitive impairment (MCI) in elderly individuals. We hypothesized that measurement error when using the new alternate MoCA versions to monitor change over time could be related to the use of items that are not of comparable difficulty to their corresponding originals of similar content. The objective of this study was to compare the difficulty of the alternate MoCA items to the original ones. Five selected items from alternate versions of the MoCA were included with items from the original MoCA administered adaptively to geriatric outpatients (N = 78). Rasch analysis was used to estimate the difficulty level of the items. None of the five items from the alternate versions matched the difficulty level of their corresponding original items. This study demonstrates the potential benefits of a Rasch analysis-based approach for selecting items during the process of development of parallel forms. The results suggest that better match of the items from different MoCA forms by their difficulty would result in higher sensitivity to changes in cognitive function over time.

Bayes factor covariance testing in item response models

NARCIS (Netherlands)

Fox, J.P.; Mulder, J.; Sinharay, Sandip

2017-01-01

Two marginal one-parameter item response theory models are introduced, by integrating out the latent variable or random item parameter. It is shown that both marginal response models are multivariate (probit) models with a compound symmetry covariance structure. Several common hypotheses concerning

Bayes Factor Covariance Testing in Item Response Models

NARCIS (Netherlands)

Fox, Jean-Paul; Mulder, Joris; Sinharay, Sandip

2017-01-01

Two marginal one-parameter item response theory models are introduced, by integrating out the latent variable or random item parameter. It is shown that both marginal response models are multivariate (probit) models with a compound symmetry covariance structure. Several common hypotheses concerning

26 CFR 301.6222(a)-1 - Consistent treatment of partnership items.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 18 2010-04-01 2010-04-01 false Consistent treatment of partnership items. 301... Consistent treatment of partnership items. (a) In general. The treatment of a partnership item on the partner's return must be consistent with the treatment of that item by the partnership on the partnership...

Analyzing force concept inventory with item response theory

Science.gov (United States)

Wang, Jing; Bao, Lei

2010-10-01

Item response theory is a popular assessment method used in education. It rests on the assumption of a probability framework that relates students' innate ability and their performance on test questions. Item response theory transforms students' raw test scores into a scaled proficiency score, which can be used to compare results obtained with different test questions. The scaled score also addresses the issues of ceiling effects and guessing, which commonly exist in quantitative assessment. We used item response theory to analyze the force concept inventory (FCI). Our results show that item response theory can be useful for analyzing physics concept surveys such as the FCI and produces results about the individual questions and student performance that are beyond the capability of classical statistics. The theory yields detailed measurement parameters regarding the difficulty, discrimination features, and probability of correct guess for each of the FCI questions.

Criteria for eliminating items of a Test of Figural Analogies

Directory of Open Access Journals (Sweden)

Diego Blum

2013-12-01

Full Text Available This paper describes the steps taken to eliminate two of the items in a Test of Figural Analogies (TFA. The main guidelines of psychometric analysis concerning Classical Test Theory (CTT and Item Response Theory (IRT are explained. The item elimination process was based on both the study of the CTT difficulty and discrimination index, and the unidimensionality analysis. The a, b, and c parameters of the Three Parameter Logistic Model of IRT were also considered for this purpose, as well as the assessment of each item fitting this model. The unfavourable characteristics of a group of TFA items are detailed, and decisions leading to their possible elimination are discussed.

Factors enabling and inhibiting facilitator development: lessons learned from Essentials of Care in South Eastern Sydney Local Health District

Directory of Open Access Journals (Sweden)

Tamera Watling

2015-11-01

Full Text Available Background: Building and sustaining facilitation capacity for the creation of person-centred workplace cultures is a strategic priority of the South Eastern Sydney Local Health District Nursing and Midwifery Practice and Workforce Unit. Skilled facilitation is considered critical to the successful implementation and sustainability of practice development-based programmes, including Essentials of Care. Review of facilitator activity across the district revealed that less than half of those who had participated in a facilitation development programme were actively applying their knowledge to the facilitation of Essentials of Care. Aim: To understand the enablers and barriers to the development and application of facilitation skills and the implementation of Essentials of Care from the perspective of the programme’s facilitators. The purpose was to inform ongoing strategies to build and sustain facilitation capacity for its effective implementation. Method: A 21-question qualitative survey was designed using Survey Monkey. Questions were framed to allow free text responses for qualitative content analysis. Ethics approval was applied for and deemed unnecessary by the local health district ethics committee; the committee deemed the project to be a quality improvement activity not requiring independent ethical review. The survey was distributed electronically to 230 health professionals who had participated in the facilitation development programme between 2008 and 2013. Findings: The key enablers for both facilitator development and implementation of Essentials of Care were time, engagement of staff and leadership support. Additional enablers for facilitation development included access to development opportunities and practical application of skills. Facilitation was an enabler of Essentials of Care implementation. Leadership support is pivotal, especially where time and patient acuity impinge on the release of staff for facilitated activities

Understanding And Developing Innovative Products And Services: The Essential Elements

DEFF Research Database (Denmark)

Tan, Adrian; McAloone, Timothy Charles

2006-01-01

Innovation is synonymous with successful development and implementation, and therefore peculiar to innovation is that it has to prove itself on the market before we can deem it innovative. This paper suggests an approach for understanding the principles for innovative products which is based, not...

Detection of Uniform and Nonuniform Differential Item Functioning by Item-Focused Trees

Science.gov (United States)

Berger, Moritz; Tutz, Gerhard

2016-01-01

Detection of differential item functioning (DIF) by use of the logistic modeling approach has a long tradition. One big advantage of the approach is that it can be used to investigate nonuniform (NUDIF) as well as uniform DIF (UDIF). The classical approach allows one to detect DIF by distinguishing between multiple groups. We propose an…

Development of six PROMIS pediatrics proxy-report item banks

Directory of Open Access Journals (Sweden)

Irwin Debra E

2012-02-01

Full Text Available Abstract Background Pediatric self-report should be considered the standard for measuring patient reported outcomes (PRO among children. However, circumstances exist when the child is too young, cognitively impaired, or too ill to complete a PRO instrument and a proxy-report is needed. This paper describes the development process including the proxy cognitive interviews and large-field-test survey methods and sample characteristics employed to produce item parameters for the Patient Reported Outcomes Measurement Information System (PROMIS pediatric proxy-report item banks. Methods The PROMIS pediatric self-report items were converted into proxy-report items before undergoing cognitive interviews. These items covered six domains (physical function, emotional distress, social peer relationships, fatigue, pain interference, and asthma impact. Caregivers (n = 25 of children ages of 5 and 17 years provided qualitative feedback on proxy-report items to assess any major issues with these items. From May 2008 to March 2009, the large-scale survey enrolled children ages 8-17 years to complete the self-report version and caregivers to complete the proxy-report version of the survey (n = 1548 dyads. Caregivers of children ages 5 to 7 years completed the proxy report survey (n = 432. In addition, caregivers completed other proxy instruments, PedsQL™ 4.0 Generic Core Scales Parent Proxy-Report version, PedsQL™ Asthma Module Parent Proxy-Report version, and KIDSCREEN Parent-Proxy-52. Results Item content was well understood by proxies and did not require item revisions but some proxies clearly noted that determining an answer on behalf of their child was difficult for some items. Dyads and caregivers of children ages 5-17 years old were enrolled in the large-scale testing. The majority were female (85%, married (70%, Caucasian (64% and had at least a high school education (94%. Approximately 50% had children with a chronic health condition, primarily

An improved non-Markovian degradation model with long-term dependency and item-to-item uncertainty

Science.gov (United States)

Xi, Xiaopeng; Chen, Maoyin; Zhang, Hanwen; Zhou, Donghua

2018-05-01

It is widely noted in the literature that the degradation should be simplified into a memoryless Markovian process for the purpose of predicting the remaining useful life (RUL). However, there actually exists the long-term dependency in the degradation processes of some industrial systems, including electromechanical equipments, oil tankers, and large blast furnaces. This implies the new degradation state depends not only on the current state, but also on the historical states. Such dynamic systems cannot be accurately described by traditional Markovian models. Here we present an improved non-Markovian degradation model with both the long-term dependency and the item-to-item uncertainty. As a typical non-stationary process with dependent increments, fractional Brownian motion (FBM) is utilized to simulate the fractal diffusion of practical degradations. The uncertainty among multiple items can be represented by a random variable of the drift. Based on this model, the unknown parameters are estimated through the maximum likelihood (ML) algorithm, while a closed-form solution to the RUL distribution is further derived using a weak convergence theorem. The practicability of the proposed model is fully verified by two real-world examples. The results demonstrate that the proposed method can effectively reduce the prediction error.

Mathematical-programming approaches to test item pool design

NARCIS (Netherlands)

Veldkamp, Bernard P.; van der Linden, Willem J.; Ariel, A.

2002-01-01

This paper presents an approach to item pool design that has the potential to improve on the quality of current item pools in educational and psychological testing andhence to increase both measurement precision and validity. The approach consists of the application of mathematical programming

17 CFR 229.1010 - (Item 1010) Financial statements.

Science.gov (United States)

2010-04-01

....1010 (Item 1010) Financial statements. (a) Financial information. Furnish the following financial information: (1) Audited financial statements for the two fiscal years required to be filed with the company's... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false (Item 1010) Financial...

Procedures for Selecting Items for Computerized Adaptive Tests.

Science.gov (United States)

Kingsbury, G. Gage; Zara, Anthony R.

1989-01-01

Several classical approaches and alternative approaches to item selection for computerized adaptive testing (CAT) are reviewed and compared. The study also describes procedures for constrained CAT that may be added to classical item selection approaches to allow them to be used for applied testing. (TJH)

When Educational Material Is Delivered: A Mixed Methods Content Validation Study of the Information Assessment Method.

Science.gov (United States)

Badran, Hani; Pluye, Pierre; Grad, Roland

2017-03-14

The Information Assessment Method (IAM) allows clinicians to report the cognitive impact, clinical relevance, intention to use, and expected patient health benefits associated with clinical information received by email. More than 15,000 Canadian physicians and pharmacists use the IAM in continuing education programs. In addition, information providers can use IAM ratings and feedback comments from clinicians to improve their products. Our general objective was to validate the IAM questionnaire for the delivery of educational material (ecological and logical content validity). Our specific objectives were to measure the relevance and evaluate the representativeness of IAM items for assessing information received by email. A 3-part mixed methods study was conducted (convergent design). In part 1 (quantitative longitudinal study), the relevance of IAM items was measured. Participants were 5596 physician members of the Canadian Medical Association who used the IAM. A total of 234,196 ratings were collected in 2012. The relevance of IAM items with respect to their main construct was calculated using descriptive statistics (relevance ratio R). In part 2 (qualitative descriptive study), the representativeness of IAM items was evaluated. A total of 15 family physicians completed semistructured face-to-face interviews. For each construct, we evaluated the representativeness of IAM items using a deductive-inductive thematic qualitative data analysis. In part 3 (mixing quantitative and qualitative parts), results from quantitative and qualitative analyses were reviewed, juxtaposed in a table, discussed with experts, and integrated. Thus, our final results are derived from the views of users (ecological content validation) and experts (logical content validation). Of the 23 IAM items, 21 were validated for content, while 2 were removed. In part 1 (quantitative results), 21 items were deemed relevant, while 2 items were deemed not relevant (R=4.86% [N=234,196] and R=3.04% [n

Improving Measurement Efficiency of the Inner EAR Scale with Item Response Theory.

Science.gov (United States)

Jessen, Annika; Ho, Andrew D; Corrales, C Eduardo; Yueh, Bevan; Shin, Jennifer J

2018-02-01

Objectives (1) To assess the 11-item Inner Effectiveness of Auditory Rehabilitation (Inner EAR) instrument with item response theory (IRT). (2) To determine whether the underlying latent ability could also be accurately represented by a subset of the items for use in high-volume clinical scenarios. (3) To determine whether the Inner EAR instrument correlates with pure tone thresholds and word recognition scores. Design IRT evaluation of prospective cohort data. Setting Tertiary care academic ambulatory otolaryngology clinic. Subjects and Methods Modern psychometric methods, including factor analysis and IRT, were used to assess unidimensionality and item properties. Regression methods were used to assess prediction of word recognition and pure tone audiometry scores. Results The Inner EAR scale is unidimensional, and items varied in their location and information. Information parameter estimates ranged from 1.63 to 4.52, with higher values indicating more useful items. The IRT model provided a basis for identifying 2 sets of items with relatively lower information parameters. Item information functions demonstrated which items added insubstantial value over and above other items and were removed in stages, creating a 8- and 3-item Inner EAR scale for more efficient assessment. The 8-item version accurately reflected the underlying construct. All versions correlated moderately with word recognition scores and pure tone averages. Conclusion The 11-, 8-, and 3-item versions of the Inner EAR scale have strong psychometric properties, and there is correlational validity evidence for the observed scores. Modern psychometric methods can help streamline care delivery by maximizing relevant information per item administered.

QA in the procurement of items and services

International Nuclear Information System (INIS)

Wilhelm, H.

1980-01-01

Procurement of items and services is one of the important elements during the design and construction of Nuclear Power Plants. The purchaser has to establish and implement controls over the procurement process to ensure that the quality criteria, quality level and other quality requirements specified for the particuliar item or service are taken into account. The effect on safety of an error in service or the malfunction of an item is the most important factor to be considered in determining the extent of quality assurance efforts. A typical example of a procurement process will be demonstrated for safety related mechanical components. (orig./RW)

DIF Trees: Using Classification Trees to Detect Differential Item Functioning

Science.gov (United States)

Vaughn, Brandon K.; Wang, Qiu

2010-01-01

A nonparametric tree classification procedure is used to detect differential item functioning for items that are dichotomously scored. Classification trees are shown to be an alternative procedure to detect differential item functioning other than the use of traditional Mantel-Haenszel and logistic regression analysis. A nonparametric…

DRD4 long allele carriers show heightened attention to high-priority items relative to low-priority items.

Science.gov (United States)

Gorlick, Marissa A; Worthy, Darrell A; Knopik, Valerie S; McGeary, John E; Beevers, Christopher G; Maddox, W Todd

2015-03-01

Humans with seven or more repeats in exon III of the DRD4 gene (long DRD4 carriers) sometimes demonstrate impaired attention, as seen in attention-deficit hyperactivity disorder, and at other times demonstrate heightened attention, as seen in addictive behavior. Although the clinical effects of DRD4 are the focus of much work, this gene may not necessarily serve as a "risk" gene for attentional deficits, but as a plasticity gene where attention is heightened for priority items in the environment and impaired for minor items. Here we examine the role of DRD4 in two tasks that benefit from selective attention to high-priority information. We examine a category learning task where performance is supported by focusing on features and updating verbal rules. Here, selective attention to the most salient features is associated with good performance. In addition, we examine the Operation Span (OSPAN) task, a working memory capacity task that relies on selective attention to update and maintain items in memory while also performing a secondary task. Long DRD4 carriers show superior performance relative to short DRD4 homozygotes (six or less tandem repeats) in both the category learning and OSPAN tasks. These results suggest that DRD4 may serve as a "plasticity" gene where individuals with the long allele show heightened selective attention to high-priority items in the environment, which can be beneficial in the appropriate context.

Australian Chemistry Test Item Bank: Years 11 and 12. Volume 2.

Science.gov (United States)

Commons, C., Ed.; Martin, P., Ed.

The second volume of the Australian Chemistry Test Item Bank, consisting of two volumes, contains nearly 2000 multiple-choice items related to the chemistry taught in Year 11 and Year 12 courses in Australia. Items which were written during 1979 and 1980 were initially published in the "ACER Chemistry Test Item Collection" and in the…

The Body Appreciation Scale-2: item refinement and psychometric evaluation.

Science.gov (United States)

Tylka, Tracy L; Wood-Barcalow, Nichole L

2015-01-01

Considered a positive body image measure, the 13-item Body Appreciation Scale (BAS; Avalos, Tylka, & Wood-Barcalow, 2005) assesses individuals' acceptance of, favorable opinions toward, and respect for their bodies. While the BAS has accrued psychometric support, we improved it by rewording certain BAS items (to eliminate sex-specific versions and body dissatisfaction-based language) and developing additional items based on positive body image research. In three studies, we examined the reworded, newly developed, and retained items to determine their psychometric properties among college and online community (Amazon Mechanical Turk) samples of 820 women and 767 men. After exploratory factor analysis, we retained 10 items (five original BAS items). Confirmatory factor analysis upheld the BAS-2's unidimensionality and invariance across sex and sample type. Its internal consistency, test-retest reliability, and construct (convergent, incremental, and discriminant) validity were supported. The BAS-2 is a psychometrically sound positive body image measure applicable for research and clinical settings. Copyright © 2014 Elsevier Ltd. All rights reserved.

Difference in method of administration did not significantly impact item response

DEFF Research Database (Denmark)

Bjorner, Jakob B; Rose, Matthias; Gandek, Barbara

2014-01-01

assistant (PDA), or personal computer (PC) on the Internet, and a second form by PC, in the same administration. Structural invariance, equivalence of item responses, and measurement precision were evaluated using confirmatory factor analysis and item response theory methods. RESULTS: Multigroup...... levels in IVR, PQ, or PDA administration as compared to PC. Availability of large item response theory-calibrated PROMIS item banks allowed for innovations in study design and analysis.......PURPOSE: To test the impact of method of administration (MOA) on the measurement characteristics of items developed in the Patient-Reported Outcomes Measurement Information System (PROMIS). METHODS: Two non-overlapping parallel 8-item forms from each of three PROMIS domains (physical function...

PENGEMBANGAN TES BERPIKIR KRITIS DENGAN PENDEKATAN ITEM RESPONSE THEORY

Directory of Open Access Journals (Sweden)

Fajrianthi Fajrianthi

2016-06-01

Full Text Available Penelitian ini bertujuan untuk menghasilkan sebuah alat ukur (tes berpikir kritis yang valid dan reliabel untuk digunakan, baik dalam lingkup pendidikan maupun kerja di Indonesia. Tahapan penelitian dilakukan berdasarkan tahap pengembangan tes menurut Hambleton dan Jones (1993. Kisi-kisi dan pembuatan butir didasarkan pada konsep dalam tes Watson-Glaser Critical Thinking Appraisal (WGCTA. Pada WGCTA, berpikir kritis terdiri dari lima dimensi yaitu Inference, Recognition Assumption, Deduction, Interpretation dan Evaluation of arguments. Uji coba tes dilakukan pada 1.453 peserta tes seleksi karyawan di Surabaya, Gresik, Tuban, Bojonegoro, Rembang. Data dikotomi dianalisis dengan menggunakan model IRT dengan dua parameter yaitu daya beda dan tingkat kesulitan butir. Analisis dilakukan dengan menggunakan program statistik Mplus versi 6.11 Sebelum melakukan analisis dengan IRT, dilakukan pengujian asumsi yaitu uji unidimensionalitas, independensi lokal dan Item Characteristic Curve (ICC. Hasil analisis terhadap 68 butir menghasilkan 15 butir dengan daya beda yang cukup baik dan tingkat kesulitan butir yang berkisar antara –4 sampai dengan 2.448. Sedikitnya jumlah butir yang berkualitas baik disebabkan oleh kelemahan dalam menentukan subject matter experts di bidang berpikir kritis dan pemilihan metode skoring. Kata kunci: Pengembangan tes, berpikir kritis, item response theory   DEVELOPING CRITICAL THINKING TEST UTILISING ITEM RESPONSE THEORY Abstract The present study was aimed to develop a valid and reliable instrument in assesing critical thinking which can be implemented both in educational and work settings in Indonesia. Following the Hambleton and Jones’s (1993 procedures on test development, the study developed the instrument by employing the concept of critical thinking from Watson-Glaser Critical Thinking Appraisal (WGCTA. The study included five dimensions of critical thinking as adopted from the WGCTA: Inference, Recognition

Item response theory at subject- and group-level

NARCIS (Netherlands)

Tobi, Hilde

1990-01-01

This paper reviews the literature about item response models for the subject level and aggregated level (group level). Group-level item response models (IRMs) are used in the United States in large-scale assessment programs such as the National Assessment of Educational Progress and the California

48 CFR 52.212-2 - Evaluation-Commercial Items.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Evaluation-Commercial....212-2 Evaluation—Commercial Items. As prescribed in 12.301(c), the Contracting Officer may insert a provision substantially as follows: Evaluation—Commercial Items (JAN 1999) (a) The Government will award a...

Loglinear multidimensional IRT models for polytomously scored items

NARCIS (Netherlands)

Kelderman, Henk; Rijkes, Carl P.M.; Rijkes, Carl

1994-01-01

A loglinear IRT model is proposed that relates polytomously scored item responses to a multidimensional latent space. The analyst may specify a response function for each response, indicating which latent abilities are necessary to arrive at that response. Each item may have a different number of

Item Response Theory Models for Wording Effects in Mixed-Format Scales

Science.gov (United States)

Wang, Wen-Chung; Chen, Hui-Fang; Jin, Kuan-Yu

2015-01-01

Many scales contain both positively and negatively worded items. Reverse recoding of negatively worded items might not be enough for them to function as positively worded items do. In this study, we commented on the drawbacks of existing approaches to wording effect in mixed-format scales and used bi-factor item response theory (IRT) models to…

16 CFR 304.5 - Marking requirements for imitation political items.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Marking requirements for imitation political... imitation political items. (a) An imitation political item which is manufactured in the United States, or...) An imitation political item of incusable material shall be incused with the calendar year in sans...

Improving measurement of injection drug risk behavior using item response theory.

Science.gov (United States)

Janulis, Patrick

2014-03-01

Recent research highlights the multiple steps to preparing and injecting drugs and the resultant viral threats faced by drug users. This research suggests that more sensitive measurement of injection drug HIV risk behavior is required. In addition, growing evidence suggests there are gender differences in injection risk behavior. However, the potential for differential item functioning between genders has not been explored. To explore item response theory as an improved measurement modeling technique that provides empirically justified scaling of injection risk behavior and to examine for potential gender-based differential item functioning. Data is used from three studies in the National Institute on Drug Abuse's Criminal Justice Drug Abuse Treatment Studies. A two-parameter item response theory model was used to scale injection risk behavior and logistic regression was used to examine for differential item functioning. Item fit statistics suggest that item response theory can be used to scale injection risk behavior and these models can provide more sensitive estimates of risk behavior. Additionally, gender-based differential item functioning is present in the current data. Improved measurement of injection risk behavior using item response theory should be encouraged as these models provide increased congruence between construct measurement and the complexity of injection-related HIV risk. Suggestions are made to further improve injection risk behavior measurement. Furthermore, results suggest direct comparisons of composite scores between males and females may be misleading and future work should account for differential item functioning before comparing levels of injection risk behavior.

Medial temporal lobe contributions to cued retrieval of items and contexts.

Science.gov (United States)

Hannula, Deborah E; Libby, Laura A; Yonelinas, Andrew P; Ranganath, Charan

2013-10-01

Several models have proposed that different regions of the medial temporal lobes contribute to different aspects of episodic memory. For instance, according to one view, the perirhinal cortex represents specific items, parahippocampal cortex represents information regarding the context in which these items were encountered, and the hippocampus represents item-context bindings. Here, we used event-related functional magnetic resonance imaging (fMRI) to test a specific prediction of this model-namely, that successful retrieval of items from context cues will elicit perirhinal recruitment and that successful retrieval of contexts from item cues will elicit parahippocampal cortex recruitment. Retrieval of the bound representation in either case was expected to elicit hippocampal engagement. To test these predictions, we had participants study several item-context pairs (i.e., pictures of objects and scenes, respectively), and then had them attempt to recall items from associated context cues and contexts from associated item cues during a scanned retrieval session. Results based on both univariate and multivariate analyses confirmed a role for hippocampus in content-general relational memory retrieval, and a role for parahippocampal cortex in successful retrieval of contexts from item cues. However, we also found that activity differences in perirhinal cortex were correlated with successful cued recall for both items and contexts. These findings provide partial support for the above predictions and are discussed with respect to several models of medial temporal lobe function. Copyright © 2013 Elsevier Ltd. All rights reserved.

Medial Temporal Lobe Contributions to Cued Retrieval of Items and Contexts

Science.gov (United States)

Hannula, Deborah E.; Libby, Laura A.; Yonelinas, Andrew P.; Ranganath, Charan

2013-01-01

Several models have proposed that different regions of the medial temporal lobes contribute to different aspects of episodic memory. For instance, according to one view, the perirhinal cortex represents specific items, parahippocampal cortex represents information regarding the context in which these items were encountered, and the hippocampus represents item-context bindings. Here, we used event-related functional magnetic resonance imaging (fMRI) to test a specific prediction of this model – namely, that successful retrieval of items from context cues will elicit perirhinal recruitment and that successful retrieval of contexts from item cues will elicit parahippocampal cortex recruitment. Retrieval of the bound representation in either case was expected to elicit hippocampal engagement. To test these predictions, we had participants study several item-context pairs (i.e., pictures of objects and scenes, respectively), and then had them attempt to recall items from associated context cues and contexts from associated item cues during a scanned retrieval session. Results based on both univariate and multivariate analyses confirmed a role for hippocampus in content-general relational memory retrieval, and a role for parahippocampal cortex in successful retrieval of contexts from item cues. However, we also found that activity differences in perirhinal cortex were correlated with successful cued recall for both items and contexts. These findings provide partial support for the above predictions and are discussed with respect to several models of medial temporal lobe function. PMID:23466350

A scale purification procedure for evaluation of differential item functioning

NARCIS (Netherlands)

Khalid, Muhammad Naveed; Glas, Cornelis A.W.

2014-01-01

Item bias or differential item functioning (DIF) has an important impact on the fairness of psychological and educational testing. In this paper, DIF is seen as a lack of fit to an item response (IRT) model. Inferences about the presence and importance of DIF require a process of so-called test

ACER Chemistry Test Item Collection (ACER CHEMTIC Year 12 Supplement).

Science.gov (United States)

Australian Council for Educational Research, Hawthorn.

This publication contains 317 multiple-choice chemistry test items related to topics covered in the Victorian (Australia) Year 12 chemistry course. It allows teachers access to a range of items suitable for diagnostic and achievement purposes, supplementing the ACER Chemistry Test Item Collection--Year 12 (CHEMTIC). The topics covered are: organic…

48 CFR 53.212 - Acquisition of commercial items.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Acquisition of commercial... (CONTINUED) CLAUSES AND FORMS FORMS Prescription of Forms 53.212 Acquisition of commercial items. SF 1449 (Rev. 3/2005), Solicitation/Contract/Order for Commercial Items. SF 1449 is prescribed for use in...

The utility of single-item readiness screeners in middle school.

Science.gov (United States)

Lewis, Crystal G; Herman, Keith C; Huang, Francis L; Stormont, Melissa; Grossman, Caroline; Eddy, Colleen; Reinke, Wendy M

2017-10-01

This study examined the benefit of utilizing one-item academic and one-item behavior readiness teacher-rated screeners at the beginning of the school year to predict end-of-school year outcomes for middle school students. The Middle School Academic and Behavior Readiness (M-ABR) screeners were developed to provide an efficient and effective way to assess readiness in students. Participants included 889 students in 62 middle school classrooms in an urban Missouri school district. Concurrent validity with the M-ABR items and other indicators of readiness in the fall were evaluated using Pearson product-moment correlation coefficients, with the academic readiness item having medium to strong correlations with other baseline academic indicators (r=±0.56 to 0.91) and the behavior readiness item having low to strong correlations with baseline behavior items (r=±0.20 to 0.79). Next, the predictive validity of the M-ABR items was analyzed with hierarchical linear regressions using end-of-year outcomes as the dependent variable. The academic and behavior readiness items demonstrated adequate validity for all outcomes with moderate effects (β=±0.31 to 0.73 for academic outcomes and β=±0.24 to 0.59 for behavioral outcomes) after controlling for baseline demographics. Even after controlling for baseline scores, the M-ABR items predicted unique variance in almost all outcome variables. Four conditional probability indices were calculated to obtain an optimal cut score, to determine ready vs. not ready, for both single-item M-ABR scales. The cut point of "fair" yielded the most acceptable values for the indices. The odd ratios (OR) of experiencing negative outcomes given a "fair" or lower readiness rating (2 or below on the M-ABR screeners) at the beginning of the year were significant and strong for all outcomes (OR=2.29 to OR=14.46), except for internalizing problems. These findings suggest promise for using single readiness items to screen for varying negative end

Method of locating related items in a geometric space for data mining

Science.gov (United States)

Hendrickson, Bruce A.

1999-01-01

A method for locating related items in a geometric space transforms relationships among items to geometric locations. The method locates items in the geometric space so that the distance between items corresponds to the degree of relatedness. The method facilitates communication of the structure of the relationships among the items. The method is especially beneficial for communicating databases with many items, and with non-regular relationship patterns. Examples of such databases include databases containing items such as scientific papers or patents, related by citations or keywords. A computer system adapted for practice of the present invention can include a processor, a storage subsystem, a display device, and computer software to direct the location and display of the entities. The method comprises assigning numeric values as a measure of similarity between each pairing of items. A matrix is constructed, based on the numeric values. The eigenvectors and eigenvalues of the matrix are determined. Each item is located in the geometric space at coordinates determined from the eigenvectors and eigenvalues. Proper construction of the matrix and proper determination of coordinates from eigenvectors can ensure that distance between items in the geometric space is representative of the numeric value measure of the items' similarity.

Cross-National Prevalence of Traditional Bullying, Traditional Victimization, Cyberbullying and Cyber-Victimization: Comparing Single-Item and Multiple-Item Approaches of Measurement

Science.gov (United States)

Yanagida, Takuya; Gradinger, Petra; Strohmeier, Dagmar; Solomontos-Kountouri, Olga; Trip, Simona; Bora, Carmen

2016-01-01

Many large-scale cross-national studies rely on a single-item measurement when comparing prevalence rates of traditional bullying, traditional victimization, cyberbullying, and cyber-victimization between countries. However, the reliability and validity of single-item measurement approaches are highly problematic and might be biased. Data from…

Storage options for Long Length Contaminated Equipment (LLCE) items

International Nuclear Information System (INIS)

Hodgson, R.D.

1994-11-01

A review of the Washington state requirements for the storage of long equipment items removed from tanks indicate that if the contaminated materials on the long equipment items are analyzed and determined to be DW, and not EHW, the containers can be stored on an uncovered, RCRA approved, storage pad. Long equipment items contaminated with reportable levels of EHW, or suspected of being contaminated with EHW, must be protected from the elements by means of a building or other protective covering that otherwise allows adequate inspection of the containers. Storage of the long equipment item containers on an uncovered storage pad is recommended and will reduce construction costs for new storage by an estimated 60 percent when compared to construction costs for enclosed storage

Gender Invariance of the Gambling Behavior Scale for Adolescents (GBS-A): An Analysis of Differential Item Functioning Using Item Response Theory.

Science.gov (United States)

Donati, Maria Anna; Chiesi, Francesca; Izzo, Viola A; Primi, Caterina

2017-01-01

As there is a lack of evidence attesting the equivalent item functioning across genders for the most employed instruments used to measure pathological gambling in adolescence, the present study was aimed to test the gender invariance of the Gambling Behavior Scale for Adolescents (GBS-A), a new measurement tool to assess the severity of Gambling Disorder (GD) in adolescents. The equivalence of the items across genders was assessed by analyzing Differential Item Functioning within an Item Response Theory framework. The GBS-A was administered to 1,723 adolescents, and the graded response model was employed. The results attested the measurement equivalence of the GBS-A when administered to male and female adolescent gamblers. Overall, findings provided evidence that the GBS-A is an effective measurement tool of the severity of GD in male and female adolescents and that the scale was unbiased and able to relieve truly gender differences. As such, the GBS-A can be profitably used in educational interventions and clinical treatments with young people.

Safety Evaluation for Packaging (onsite) T Plant Canyon Items

International Nuclear Information System (INIS)

OBRIEN, J.H.

2000-01-01

This safety evaluation for packaging (SEP) evaluates and documents the ability to safely ship mostly unique inventories of miscellaneous T Plant canyon waste items (T-P Items) encountered during the canyon deck clean off campaign. In addition, this SEP addresses contaminated items and material that may be shipped in a strong tight package (STP). The shipments meet the criteria for onsite shipments as specified by Fluor Hanford in HNF-PRO-154, Responsibilities and Procedures for all Hazardous Material Shipments

Safety Evaluation for Packaging (onsite) T Plant Canyon Items

Energy Technology Data Exchange (ETDEWEB)

OBRIEN, J.H.

2000-07-14

This safety evaluation for packaging (SEP) evaluates and documents the ability to safely ship mostly unique inventories of miscellaneous T Plant canyon waste items (T-P Items) encountered during the canyon deck clean off campaign. In addition, this SEP addresses contaminated items and material that may be shipped in a strong tight package (STP). The shipments meet the criteria for onsite shipments as specified by Fluor Hanford in HNF-PRO-154, Responsibilities and Procedures for all Hazardous Material Shipments.

Reliability and validity of the Spanish version of the 10-item Connor-Davidson Resilience Scale (10-item CD-RISC in young adults

Directory of Open Access Journals (Sweden)

García-Campayo Javier

2011-08-01

Full Text Available Abstract Background The 10-item Connor-Davidson Resilience Scale (10-item CD-RISC is an instrument for measuring resilience that has shown good psychometric properties in its original version in English. The aim of this study was to evaluate the validity and reliability of the Spanish version of the 10-item CD-RISC in young adults and to verify whether it is structured in a single dimension as in the original English version. Findings Cross-sectional observational study including 681 university students ranging in age from 18 to 30 years. The number of latent factors in the 10 items of the scale was analyzed by exploratory factor analysis. Confirmatory factor analysis was used to verify whether a single factor underlies the 10 items of the scale as in the original version in English. The convergent validity was analyzed by testing whether the mean of the scores of the mental component of SF-12 (MCS and the quality of sleep as measured with the Pittsburgh Sleep Index (PSQI were higher in subjects with better levels of resilience. The internal consistency of the 10-item CD-RISC was estimated using the Cronbach α test and test-retest reliability was estimated with the intraclass correlation coefficient. The Cronbach α coefficient was 0.85 and the test-retest intraclass correlation coefficient was 0.71. The mean MCS score and the level of quality of sleep in both men and women were significantly worse in subjects with lower resilience scores. Conclusions The Spanish version of the 10-item CD-RISC showed good psychometric properties in young adults and thus can be used as a reliable and valid instrument for measuring resilience. Our study confirmed that a single factor underlies the resilience construct, as was the case of the original scale in English.

The Influence of Item Properties on Association-Memory

Science.gov (United States)

Madan, Christopher R.; Glaholt, Mackenzie G.; Caplan, Jeremy B.

2010-01-01

Word properties like imageability and word frequency improve cued recall of verbal paired-associates. We asked whether these enhancements follow simply from prior effects on item-memory, or also strengthen associations between items. Participants studied word pairs varying in imageability or frequency: pairs were "pure" (high-high, low-low) or…

Assessment of Differential Item Functioning in the Experiences of Discrimination Index

Science.gov (United States)

Cunningham, Timothy J.; Berkman, Lisa F.; Gortmaker, Steven L.; Kiefe, Catarina I.; Jacobs, David R.; Seeman, Teresa E.; Kawachi, Ichiro

2011-01-01

The psychometric properties of instruments used to measure self-reported experiences of discrimination in epidemiologic studies are rarely assessed, especially regarding construct validity. The authors used 2000–2001 data from the Coronary Artery Risk Development in Young Adults (CARDIA) Study to examine differential item functioning (DIF) in 2 versions of the Experiences of Discrimination (EOD) Index, an index measuring self-reported experiences of racial/ethnic and gender discrimination. DIF may confound interpretation of subgroup differences. Large DIF was observed for 2 of 7 racial/ethnic discrimination items: White participants reported more racial/ethnic discrimination for the “at school” item, and black participants reported more racial/ethnic discrimination for the “getting housing” item. The large DIF by race/ethnicity in the index for racial/ethnic discrimination probably reflects item impact and is the result of valid group differences between blacks and whites regarding their respective experiences of discrimination. The authors also observed large DIF by race/ethnicity for 3 of 7 gender discrimination items. This is more likely to have been due to item bias. Users of the EOD Index must consider the advantages and disadvantages of DIF adjustment (omitting items, constructing separate measures, and retaining items). The EOD Index has substantial usefulness as an instrument that can assess self-reported experiences of discrimination. PMID:22038104

41 CFR 101-30.101-1a - Item of production.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Item of production. 101-30.101-1a Section 101-30.101-1a Public Contracts and Property Management Federal Property Management....1-General § 101-30.101-1a Item of production. Item-of-production means those articles, equipment...

Selecting Lower Priced Items.

Science.gov (United States)

Kleinert, Harold L.; And Others

1988-01-01

A program used to teach moderately to severely mentally handicapped students to select the lower priced items in actual shopping activities is described. Through a five-phase process, students are taught to compare prices themselves as well as take into consideration variations in the sizes of containers and varying product weights. (VW)

Test Score Equating Using Discrete Anchor Items versus Passage-Based Anchor Items: A Case Study Using "SAT"® Data. Research Report. ETS RR-14-14

Science.gov (United States)

Liu, Jinghua; Zu, Jiyun; Curley, Edward; Carey, Jill

2014-01-01

The purpose of this study is to investigate the impact of discrete anchor items versus passage-based anchor items on observed score equating using empirical data.This study compares an "SAT"® critical reading anchor that contains more discrete items proportionally, compared to the total tests to be equated, to another anchor that…

Applying modern psychometric techniques to melodic discrimination testing: Item response theory, computerised adaptive testing, and automatic item generation.

Science.gov (United States)

Harrison, Peter M C; Collins, Tom; Müllensiefen, Daniel

2017-06-15

Modern psychometric theory provides many useful tools for ability testing, such as item response theory, computerised adaptive testing, and automatic item generation. However, these techniques have yet to be integrated into mainstream psychological practice. This is unfortunate, because modern psychometric techniques can bring many benefits, including sophisticated reliability measures, improved construct validity, avoidance of exposure effects, and improved efficiency. In the present research we therefore use these techniques to develop a new test of a well-studied psychological capacity: melodic discrimination, the ability to detect differences between melodies. We calibrate and validate this test in a series of studies. Studies 1 and 2 respectively calibrate and validate an initial test version, while Studies 3 and 4 calibrate and validate an updated test version incorporating additional easy items. The results support the new test's viability, with evidence for strong reliability and construct validity. We discuss how these modern psychometric techniques may also be profitably applied to other areas of music psychology and psychological science in general.

A note on monotonicity of item response functions for ordered polytomous item response theory models.

Science.gov (United States)

Kang, Hyeon-Ah; Su, Ya-Hui; Chang, Hua-Hua

2018-03-08

A monotone relationship between a true score (τ) and a latent trait level (θ) has been a key assumption for many psychometric applications. The monotonicity property in dichotomous response models is evident as a result of a transformation via a test characteristic curve. Monotonicity in polytomous models, in contrast, is not immediately obvious because item response functions are determined by a set of response category curves, which are conceivably non-monotonic in θ. The purpose of the present note is to demonstrate strict monotonicity in ordered polytomous item response models. Five models that are widely used in operational assessments are considered for proof: the generalized partial credit model (Muraki, 1992, Applied Psychological Measurement, 16, 159), the nominal model (Bock, 1972, Psychometrika, 37, 29), the partial credit model (Masters, 1982, Psychometrika, 47, 147), the rating scale model (Andrich, 1978, Psychometrika, 43, 561), and the graded response model (Samejima, 1972, A general model for free-response data (Psychometric Monograph no. 18). Psychometric Society, Richmond). The study asserts that the item response functions in these models strictly increase in θ and thus there exists strict monotonicity between τ and θ under certain specified conditions. This conclusion validates the practice of customarily using τ in place of θ in applied settings and provides theoretical grounds for one-to-one transformations between the two scales. © 2018 The British Psychological Society.

Validation of the Spanish versions of the long (26 items) and short (12 items) forms of the Self-Compassion Scale (SCS).

Science.gov (United States)

Garcia-Campayo, Javier; Navarro-Gil, Mayte; Andrés, Eva; Montero-Marin, Jesús; López-Artal, Lorena; Demarzo, Marcelo Marcos Piva

2014-01-10

Self-compassion is a key psychological construct for assessing clinical outcomes in mindfulness-based interventions. The aim of this study was to validate the Spanish versions of the long (26 item) and short (12 item) forms of the Self-Compassion Scale (SCS). The translated Spanish versions of both subscales were administered to two independent samples: Sample 1 was comprised of university students (n = 268) who were recruited to validate the long form, and Sample 2 was comprised of Aragon Health Service workers (n = 271) who were recruited to validate the short form. In addition to SCS, the Mindful Attention Awareness Scale (MAAS), the State-Trait Anxiety Inventory-Trait (STAI-T), the Beck Depression Inventory (BDI) and the Perceived Stress Questionnaire (PSQ) were administered. Construct validity, internal consistency, test-retest reliability and convergent validity were tested. The Confirmatory Factor Analysis (CFA) of the long and short forms of the SCS confirmed the original six-factor model in both scales, showing goodness of fit. Cronbach's α for the 26 item SCS was 0.87 (95% CI = 0.85-0.90) and ranged between 0.72 and 0.79 for the 6 subscales. Cronbach's α for the 12-item SCS was 0.85 (95% CI = 0.81-0.88) and ranged between 0.71 and 0.77 for the 6 subscales. The long (26-item) form of the SCS showed a test-retest coefficient of 0.92 (95% CI = 0.89-0.94). The Intraclass Correlation (ICC) for the 6 subscales ranged from 0.84 to 0.93. The short (12-item) form of the SCS showed a test-retest coefficient of 0.89 (95% CI: 0.87-0.93). The ICC for the 6 subscales ranged from 0.79 to 0.91. The long and short forms of the SCS exhibited a significant negative correlation with the BDI, the STAI and the PSQ, and a significant positive correlation with the MAAS. The correlation between the total score of the long and short SCS form was r = 0.92. The Spanish versions of the long (26-item) and short (12-item) forms of the SCS are valid and

Exploring differential item functioning (DIF) with the Rasch model: a comparison of gender differences on eighth grade science items in the United States and Spain.

Science.gov (United States)

Babiar, Tasha Calvert

2011-01-01

Traditionally, women and minorities have not been fully represented in science and engineering. Numerous studies have attributed these differences to gaps in science achievement as measured by various standardized tests. Rather than describe mean group differences in science achievement across multiple cultures, this study focused on an in-depth item-level analysis across two countries: Spain and the United States. This study investigated eighth-grade gender differences on science items across the two countries. A secondary purpose of the study was to explore the nature of gender differences using the many-faceted Rasch Model as a way to estimate gender DIF. A secondary analysis of data from the Third International Mathematics and Science Study (TIMSS) was used to address three questions: 1) Does gender DIF in science achievement exist? 2) Is there a relationship between gender DIF and characteristics of the science items? 3) Do the relationships between item characteristics and gender DIF in science items replicate across countries. Participants included 7,087 eight grade students from the United States and 3,855 students from Spain who participated in TIMSS. The Facets program (Linacre and Wright, 1992) was used to estimate gender DIF. The results of the analysis indicate that the content of the item seemed to be related to gender DIF. The analysis also suggests that there is a relationship between gender DIF and item format. No pattern of gender DIF related to cognitive demand was found. The general pattern of gender DIF was similar across the two countries used in the analysis. The strength of item-level analysis as opposed to group mean difference analysis is that gender differences can be detected at the item level, even when no mean differences can be detected at the group level.

Scenes for Social Information Processing in Adolescence: Item and factor analytic procedures for psychometric appraisal.

Science.gov (United States)

Vagos, Paula; Rijo, Daniel; Santos, Isabel M

2016-04-01

Relatively little is known about measures used to investigate the validity and applications of social information processing theory. The Scenes for Social Information Processing in Adolescence includes items built using a participatory approach to evaluate the attribution of intent, emotion intensity, response evaluation, and response decision steps of social information processing. We evaluated a sample of 802 Portuguese adolescents (61.5% female; mean age = 16.44 years old) using this instrument. Item analysis and exploratory and confirmatory factor analytic procedures were used for psychometric examination. Two measures for attribution of intent were produced, including hostile and neutral; along with 3 emotion measures, focused on negative emotional states; 8 response evaluation measures; and 4 response decision measures, including prosocial and impaired social behavior. All of these measures achieved good internal consistency values and fit indicators. Boys seemed to favor and choose overt and relational aggression behaviors more often; girls conveyed higher levels of neutral attribution, sadness, and assertiveness and passiveness. The Scenes for Social Information Processing in Adolescence achieved adequate psychometric results and seems a valuable alternative for evaluating social information processing, even if it is essential to continue investigation into its internal and external validity. (c) 2016 APA, all rights reserved.

An item-oriented recommendation algorithm on cold-start problem

Science.gov (United States)

Qiu, Tian; Chen, Guang; Zhang, Zi-Ke; Zhou, Tao

2011-09-01

Based on a hybrid algorithm incorporating the heat conduction and probability spreading processes (Proc. Natl. Acad. Sci. U.S.A., 107 (2010) 4511), in this letter, we propose an improved method by introducing an item-oriented function, focusing on solving the dilemma of the recommendation accuracy between the cold and popular items. Differently from previous works, the present algorithm does not require any additional information (e.g., tags). Further experimental results obtained in three real datasets, RYM, Netflix and MovieLens, show that, compared with the original hybrid method, the proposed algorithm significantly enhances the recommendation accuracy of the cold items, while it keeps the recommendation accuracy of the overall and the popular items. This work might shed some light on both understanding and designing effective methods for long-tailed online applications of recommender systems.

Essential elements of the nursing practice environment in nursing homes: Psychometric evaluation.

Science.gov (United States)

de Brouwer, Brigitte Johanna Maria; Kaljouw, Marian J; Schoonhoven, Lisette; van Achterberg, Theo

2017-06-01

To develop and psychometrically test the Essentials of Magnetism II in nursing homes. Increasing numbers and complex needs of older people in nursing homes strain the nursing workforce. Fewer adequately trained staff and increased care complexity raise concerns about declining quality. Nurses' practice environment has been reported to affect quality of care and productivity. The Essentials of Magnetism II © measures processes and relationships of practice environments that contribute to productivity and quality of care and can therefore be useful in identifying processes requiring change to pursue excellent practice environments. However, this instrument was not explicitly evaluated for its use in nursing home settings so far. In a preparatory phase, a cross-sectional survey study focused on face validity of the essentials of magnetism in nursing homes. A second cross-sectional survey design was then used to further test the instrument's validity and reliability. Psychometric testing included evaluation of content and construct validity, and reliability. Nurses (N = 456) working at 44 units of three nursing homes were included. Respondent acceptance, relevance and clarity were adequate. Five of the eight subscales and 54 of the 58 items did meet preset psychometric criteria. All essentials of magnetism are considered relevant for nursing homes. The subscales Adequacy of Staffing, Clinically Competent Peers, Patient Centered Culture, Autonomy and Nurse Manager Support can be used in nursing homes without problems. The other subscales cannot be directly applied to this setting. The valid subscales of the Essentials of Magnetism II instrument can be used to design excellent nursing practice environments that support nurses' delivery of care. Before using the entire instrument, however, the other subscales have to be improved. © 2016 John Wiley & Sons Ltd.

Building an Evaluation Scale using Item Response Theory.

Science.gov (United States)

Lalor, John P; Wu, Hao; Yu, Hong

2016-11-01

Evaluation of NLP methods requires testing against a previously vetted gold-standard test set and reporting standard metrics (accuracy/precision/recall/F1). The current assumption is that all items in a given test set are equal with regards to difficulty and discriminating power. We propose Item Response Theory (IRT) from psychometrics as an alternative means for gold-standard test-set generation and NLP system evaluation. IRT is able to describe characteristics of individual items - their difficulty and discriminating power - and can account for these characteristics in its estimation of human intelligence or ability for an NLP task. In this paper, we demonstrate IRT by generating a gold-standard test set for Recognizing Textual Entailment. By collecting a large number of human responses and fitting our IRT model, we show that our IRT model compares NLP systems with the performance in a human population and is able to provide more insight into system performance than standard evaluation metrics. We show that a high accuracy score does not always imply a high IRT score, which depends on the item characteristics and the response pattern.

Intentional forgetting reduces color-naming interference: evidence from item-method directed forgetting.

Science.gov (United States)

Lee, Yuh-Shiow; Lee, Huang-Mou; Fawcett, Jonathan M

2013-01-01

In an item-method-directed forgetting task, Chinese words were presented individually, each followed by an instruction to remember or forget. Colored probe items were presented following each memory instruction requiring a speeded color-naming response. Half of the probe items were novel and unrelated to the preceding study item, whereas the remaining half of the probe items were a repetition of the preceding study item. Repeated probe items were either identical to the preceding study item (E1, E2), a phonetic reproduction of the preceding study item (E3), or perceptually matched to the preceding study item (E4). Color-naming interference was calculated by subtracting color-naming reaction times made in response to a string of meaningless symbols from that of the novel and repeated conditions. Across all experiments, participants recalled more to-be-remembered (TBR) than to-be-forgotten (TBF) study words. More importantly, Experiments 1 and 2 found that color-naming interference was reduced for repeated TBF words relative to repeated TBR words. Experiments 3 and 4 further found that this effect occurred at the perceptual rather than semantic level. These findings suggest that participants may bias processing resources away from the perceptual representation of to-be-forgotten information.

Essential elements of professional nursing environments in Primary Care and their influence on the quality of care.

Science.gov (United States)

Gea-Caballero, Vicente; Castro-Sánchez, Enrique; Júarez-Vela, Raúl; Díaz-Herrera, Miguel Ángel; de Miguel-Montoya, Isabel; Martínez-Riera, José Ramón

Nursing work environments are key determinants of care quality. Our study aimed to evaluate the characteristics of nursing environments in primary care settings in the Canary Islands, and identify crucial components of such environments to improve quality. We conducted a cross-sectional study in primary care organisations using the Practice Environment Scale - Nursing Work Index tool. We collected sociodemographic variables, scores, and selected the essential items conducive to optimal care. Appropriate parametric and non-parametric statistical tests were used to analyse relations between variables (CI = 95%, error = 5%). One hundred and forty-four nurses participated. The mean total score was 81.6. The results for the five dimensions included in the Practice Environment Scale - Nursing Work Index ranged from 2.25 - 2.92 (Mean). Twelve key items for quality of care were selected; six were positive in the Canary Islands, two were mixed, and four negative. 7/12 items were included in Dimension 2 (fundamentals of nursing). Being a manager was statistically associated with higher scores (p<.000). Years of experience was inversely associated with scores in the 12 items (p<.021). Nursing work environments in primary care settings in the Canary Islands are comparable to others previously studied in Spain. Areas to improve were human resources and participation of nurses in management decisions. Nurse managers must be knowledgeable about their working environments so they can focus on improvements in key dimensions. Copyright © 2017 Elsevier España, S.L.U. All rights reserved.

Analysis Test of Understanding of Vectors with the Three-Parameter Logistic Model of Item Response Theory and Item Response Curves Technique

Science.gov (United States)

Rakkapao, Suttida; Prasitpong, Singha; Arayathanitkul, Kwan

2016-01-01

This study investigated the multiple-choice test of understanding of vectors (TUV), by applying item response theory (IRT). The difficulty, discriminatory, and guessing parameters of the TUV items were fit with the three-parameter logistic model of IRT, using the parscale program. The TUV ability is an ability parameter, here estimated assuming…

Cash Impact of the Consumable Item Transfer, Phase II

National Research Council Canada - National Science Library

1998-01-01

...). This report is the third in a series of reports regarding the consumable item transfer (CIT), phase II. The Deputy Secretary of Defense directed the transfer of the management of consumable items to Defense Logistics Agency...

A confirmative clinimetric analysis of the 36-item Family Assessment Device.

Science.gov (United States)

Timmerby, Nina; Cosci, Fiammetta; Watson, Maggie; Csillag, Claudio; Schmitt, Florence; Steck, Barbara; Bech, Per; Thastum, Mikael

2018-02-07

The Family Assessment Device (FAD) is a 60-item questionnaire widely used to evaluate self-reported family functioning. However, the factor structure as well as the number of items has been questioned. A shorter and more user-friendly version of the original FAD-scale, the 36-item FAD, has therefore previously been proposed, based on findings in a nonclinical population of adults. We aimed in this study to evaluate the brief 36-item version of the FAD in a clinical population. Data from a European multinational study, examining factors associated with levels of family functioning in adult cancer patients' families, were used. Both healthy and ill parents completed the 60-item version FAD. The psychometric analyses conducted were Principal Component Analysis and Mokken-analysis. A total of 564 participants were included. Based on the psychometric analysis we confirmed that the 36-item version of the FAD has robust psychometric properties and can be used in clinical populations. The present analysis confirmed that the 36-item version of the FAD (18 items assessing 'well-being' and 18 items assessing 'dysfunctional' family function) is a brief scale where the summed total score is a valid measure of the dimensions of family functioning. This shorter version of the FAD is, in accordance with the concept of 'measurement-based care', an easy to use scale that could be considered when the aim is to evaluate self-reported family functioning.

[Instrument to measure adherence in hypertensive patients: contribution of Item Response Theory].

Science.gov (United States)

Rodrigues, Malvina Thaís Pacheco; Moreira, Thereza Maria Magalhaes; Vasconcelos, Alexandre Meira de; Andrade, Dalton Francisco de; Silva, Daniele Braz da; Barbetta, Pedro Alberto

2013-06-01

To analyze, by means of "Item Response Theory", an instrument to measure adherence to t treatment for hypertension. Analytical study with 406 hypertensive patients with associated complications seen in primary care in Fortaleza, CE, Northeastern Brazil, 2011 using "Item Response Theory". The stages were: dimensionality test, calibrating the items, processing data and creating a scale, analyzed using the gradual response model. A study of the dimensionality of the instrument was conducted by analyzing the polychoric correlation matrix and factor analysis of complete information. Multilog software was used to calibrate items and estimate the scores. Items relating to drug therapy are the most directly related to adherence while those relating to drug-free therapy need to be reworked because they have less psychometric information and low discrimination. The independence of items, the small number of levels in the scale and low explained variance in the adjustment of the models show the main weaknesses of the instrument analyzed. The "Item Response Theory" proved to be a relevant analysis technique because it evaluated respondents for adherence to treatment for hypertension, the level of difficulty of the items and their ability to discriminate between individuals with different levels of adherence, which generates a greater amount of information. The instrument analyzed is limited in measuring adherence to hypertension treatment, by analyzing the "Item Response Theory" of the item, and needs adjustment. The proper formulation of the items is important in order to accurately measure the desired latent trait.

Work ability as prognostic risk marker of disability pension: single-item work ability score versus multi-item work ability index.

Science.gov (United States)

Roelen, Corné A M; van Rhenen, Willem; Groothoff, Johan W; van der Klink, Jac J L; Twisk, Jos W R; Heymans, Martijn W

2014-07-01

Work ability predicts future disability pension (DP). A single-item work ability score (WAS) is emerging as a measure for work ability. This study compared single-item WAS with the multi-item work ability index (WAI) in its ability to identify workers at risk of DP. This prospective cohort study comprised 11 537 male construction workers, who completed the WAI at baseline and reported DP after a mean 2.3 years of follow-up. WAS and WAI were calibrated for DP risk predictions with the Hosmer-Lemeshow (H-L) test and their ability to discriminate between high- and low-risk construction workers was investigated with the area under the receiver operating characteristic curve (AUC). At follow-up, 336 (3%) construction workers reported DP. Both WAS [odds ratio (OR) 0.72, 95% confidence interval (95% CI) 0.66-0.78] and WAI (OR 0.57, 95% CI 0.52-0.63) scores were associated with DP at follow-up. The WAS showed miscalibration (H-L model χ (�)=10.60; df=3; P=0.01) and poorly discriminated between high- and low-risk construction workers (AUC 0.67, 95% CI 0.64-0.70). In contrast, calibration (H-L model χ �=8.20; df=8; P=0.41) and discrimination (AUC 0.78, 95% CI 0.75-0.80) were both adequate for the WAI. Although associated with the risk of future DP, the single-item WAS poorly identified male construction workers at risk of DP. We recommend using the multi-item WAI to screen for risk of DP in occupational health practice.

SHIPPING OF RADIOACTIVE ITEMS

CERN Multimedia

TIS/RP Group

2001-01-01

The TIS-RP group informs users that shipping of small radioactive items is normally guaranteed within 24 hours from the time the material is handed in at the TIS-RP service. This time is imposed by the necessary procedures (identification of the radionuclides, determination of dose rate and massive objects require a longer procedure and will therefore take longer.

Conjunctive and Disjunctive Item Response Functions.

Science.gov (United States)

1984-10-01

fed set ofvaluesof a, b, AI , B1 A2 2 . 2 A3 , and 13 , the f ’. g ’a. nd h’a in (7) are fied. Equation (7) must still hold for S - e19029e3,..* . Thus...for Item I Is -- b ?(a:1 , b1 ,O) (1 + ’)(I + e4 (22 where a and pi are arbitrary constants. These constants mst be the sam for all Items In a given...NETHERLIS I E3I1 Focility-Acquisitions 4133 Rugby Avnue 1 Lee Cronbach Bethesda, NO 20014 16 Laburnue Road Atherton, CA 94205 1 Dr. Benjamin A. Fairbank

An Effect Size Measure for Raju's Differential Functioning for Items and Tests

Science.gov (United States)

Wright, Keith D.; Oshima, T. C.

2015-01-01

This study established an effect size measure for differential functioning for items and tests' noncompensatory differential item functioning (NCDIF). The Mantel-Haenszel parameter served as the benchmark for developing NCDIF's effect size measure for reporting moderate and large differential item functioning in test items. The effect size of…

An NCME Instructional Module on Item-Fit Statistics for Item Response Theory Models

Science.gov (United States)

Ames, Allison J.; Penfield, Randall D.

2015-01-01

Drawing valid inferences from item response theory (IRT) models is contingent upon a good fit of the data to the model. Violations of model-data fit have numerous consequences, limiting the usefulness and applicability of the model. This instructional module provides an overview of methods used for evaluating the fit of IRT models. Upon completing…

Item response theory, computerized adaptive testing, and PROMIS: assessment of physical function.

Science.gov (United States)

Fries, James F; Witter, James; Rose, Matthias; Cella, David; Khanna, Dinesh; Morgan-DeWitt, Esi

2014-01-01

Patient-reported outcome (PRO) questionnaires record health information directly from research participants because observers may not accurately represent the patient perspective. Patient-reported Outcomes Measurement Information System (PROMIS) is a US National Institutes of Health cooperative group charged with bringing PRO to a new level of precision and standardization across diseases by item development and use of item response theory (IRT). With IRT methods, improved items are calibrated on an underlying concept to form an item bank for a "domain" such as physical function (PF). The most informative items can be combined to construct efficient "instruments" such as 10-item or 20-item PF static forms. Each item is calibrated on the basis of the probability that a given person will respond at a given level, and the ability of the item to discriminate people from one another. Tailored forms may cover any desired level of the domain being measured. Computerized adaptive testing (CAT) selects the best items to sharpen the estimate of a person's functional ability, based on prior responses to earlier questions. PROMIS item banks have been improved with experience from several thousand items, and are calibrated on over 21,000 respondents. In areas tested to date, PROMIS PF instruments are superior or equal to Health Assessment Questionnaire and Medical Outcome Study Short Form-36 Survey legacy instruments in clarity, translatability, patient importance, reliability, and sensitivity to change. Precise measures, such as PROMIS, efficiently incorporate patient self-report of health into research, potentially reducing research cost by lowering sample size requirements. The advent of routine IRT applications has the potential to transform PRO measurement.

INVESTIGATION OF MIS ITEM 011589A AND 3013 CONTAINERS HAVING SIMILAR CHARACTERISTICS

Energy Technology Data Exchange (ETDEWEB)

Friday, G

2006-08-23

Recent testing has identified the presence of hydrogen and oxygen in MIS Item 011589A. This isolated observation has effectuated concern regarding the potential for flammable gas mixtures in containers in the storage inventory. This study examines the known physicochemical characteristics of MIS Item 011589A and queries the ISP Database for items that are most similar or potentially similar. Items identified as most similar are believed to have the highest probability of being chemically and structurally identical to MIS Item 011589A. Items identified as potentially like MIS Item 011589A have some attributes in common, have the potential to generate gases, but have a lower probability of having similar gas generating characteristics. MIS Item 011589A is an oxide that was generated prior to 1990 at Rocky Flats in Building 707. It was associated with foundry processing and had an actinide assay of approximately 77%. Prompt gamma analysis of MIS Item 011589A indicated the presence of chloride, fluorine, magnesium, sodium, and aluminum. Queries based on MIS representation classification and process of origin were applied to the ISP Database. Evaluation criteria included binning classification (i.e., innocuous, pressure, or pressure and corrosion), availability of prompt gamma analyses, presence of chlorine and magnesium, percentage of chlorine by weight, peak ratios (i.e., Na:Cl and Mg:Na), moisture, and percent assay. These queries identified 15 items that were most similar and 106 items that were potentially like MIS Item 011589A. Although these queries identified containers that could potentially generate flammable gases, verification and confirmation can only be accomplished by destructive evaluation and testing of containers from the storage inventory.

Quantum partial search for uneven distribution of multiple target items

Science.gov (United States)

Zhang, Kun; Korepin, Vladimir

2018-06-01

Quantum partial search algorithm is an approximate search. It aims to find a target block (which has the target items). It runs a little faster than full Grover search. In this paper, we consider quantum partial search algorithm for multiple target items unevenly distributed in a database (target blocks have different number of target items). The algorithm we describe can locate one of the target blocks. Efficiency of the algorithm is measured by number of queries to the oracle. We optimize the algorithm in order to improve efficiency. By perturbation method, we find that the algorithm runs the fastest when target items are evenly distributed in database.

Evaluating construct validity of the second version of the Copenhagen Psychosocial Questionnaire through analysis of differential item functioning and differential item effect

DEFF Research Database (Denmark)

Bjorner, Jakob Bue; Pejtersen, Jan Hyld

2010-01-01

AIMS: To evaluate the construct validity of the Copenhagen Psychosocial Questionnaire II (COPSOQ II) by means of tests for differential item functioning (DIF) and differential item effect (DIE). METHODS: We used a Danish general population postal survey (n = 4,732 with 3,517 wage earners) with a ...

Validation of a mobility item bank for older patients in primary care.

Science.gov (United States)

Cabrero-García, Julio; Ramos-Pichardo, Juan Diego; Muñoz-Mendoza, Carmen Luz; Cabañero-Martínez, María José; González-Llopis, Lorena; Reig-Ferrer, Abilio

2012-12-05

To develop and validate an item bank to measure mobility in older people in primary care and to analyse differential item functioning (DIF) and differential bundle functioning (DBF) by sex. A pool of 48 mobility items was administered by interview to 593 older people attending primary health care practices. The pool contained four domains based on the International Classification of Functioning: changing and maintaining body position, carrying, lifting and pushing, walking and going up and down stairs. The Late Life Mobility item bank consisted of 35 items, and measured with a reliability of 0.90 or more across the full spectrum of mobility, except at the higher end of better functioning. No evidence was found of non-uniform DIF but uniform DIF was observed, mainly for items in the changing and maintaining body position and carrying, lifting and pushing domains. The walking domain did not display DBF, but the other three domains did, principally the carrying, lifting and pushing items. During the design and validation of an item bank to measure mobility in older people, we found that strength (carrying, lifting and pushing) items formed a secondary dimension that produced DBF. More research is needed to determine how best to include strength items in a mobility measure, or whether it would be more appropriate to design separate measures for each construct.

Development of a questionnaire to assess patient satisfaction with allergen-specific immunotherapy in adults: item generation, item reduction, and preliminary validation

Directory of Open Access Journals (Sweden)

Justícia JL

2011-05-01

Full Text Available Jose Luis Justícia1, Eva Baró2, Victoria Cardona3, Pedro Guardia4, Pedro Ojeda5, José Maria Olaguíbel6, José Maria Vega7, Carmen Vidal81Medical Department, Stallergenes Ibérica, Barcelona, Spain; 2Health Outcomes Research Department, 3D Health Research, Barcelona, Spain; 3Hospital Vall d'Hebron, Barcelona, Spain; 4Hospital Virgen Macarena, Sevilla, Spain; 5Clínica de Asma y Alergia Dres. Ojeda, Madrid, Spain; 6Complejo Hospitalario de Navarra, Pamplona, Spain; 7Hospital Regional Universitario Carlos Haya Málaga, Spain; 8Complejo Hospitalario Universitario de Santiago, Santiago de Compostela, SpainBackground: Allergen-specific immunotherapy (SIT is a treatment capable of modifying the natural course of allergy, so ensuring good adherence to SIT is fundamental. Up until now there has not existed an instrument specifically developed to measure patient satisfaction with SIT, although its assessment could help us to comprehend better and improve treatment adherence and effectiveness. The aim of this study was to develop an instrument to measure adult patient satisfaction with SIT.Methods: Items were generated from a literature review, focus groups with allergic adult patients undergoing SIT, and a meeting with experts. Potential items were administered to allergic patients undergoing SIT in an observational, cross-sectional, multicenter study. Item reduction was based on quantitative and qualitative criteria. A preliminary assessment of feasibility, reliability, and validity of the retained items was performed.Results: An initial pool of 70 items was administered to 257 patients undergoing SIT. Fifty-four items were eliminated resulting in a provisional instrument with 16 items. Factor analysis yielded four factors that were identified as perceived efficacy, activities and environment, cost-benefit balance, and overall satisfaction, explaining 74.8% of variance. Ceiling and floor effects were negligible for overall score. Overall score was

Development of a lack of appetite item bank for computer-adaptive testing (CAT)

DEFF Research Database (Denmark)

Thamsborg, Lise Laurberg Holst; Petersen, Morten Aa; Aaronson, Neil K

2015-01-01

to 12 lack of appetite items. CONCLUSIONS: Phases 1-3 resulted in 12 lack of appetite candidate items. Based on a field testing (phase 4), the psychometric characteristics of the items will be assessed and the final item bank will be generated. This CAT item bank is expected to provide precise...

Graphical modeling for item difficulty in medical faculty exams

African Journals Online (AJOL)

. Conclusion: The ... difficulty criteria. Key words: Item difficulty, quality control, statistical process control, variable control charts ..... assumed that 68% of the values fall in the interval ± 1.S; .... The balance of the construction of items of exam has ...

Exploring differential item functioning (DIF) with the Rasch model: A comparison of gender differences on eighth-grade science items in the United States and Spain

Science.gov (United States)

Calvert, Tasha

Despite the attention that has been given to gender and science, boys continue to outperform girls in science achievement, particularly by the end of secondary school. Because it is unclear whether gender differences have narrowed over time (Leder, 1992; Willingham & Cole, 1997), it is important to continue a line of inquiry into the nature of gender differences, specifically at the international level. The purpose of this study was to investigate gender differences in science achievement across two countries: United States and Spain. A secondary purpose was to demonstrate an alternative method for exploring gender differences based on the many-faceted Rasch model (1980). A secondary analysis of the data from the Third International Mathematics and Science Study (TIMSS) was used to examine the relationship between gender DIF (differential item functioning) and item characteristics (item type, content, and performance expectation) across both countries. Nationally representative samples of eighth grade students in the United States and Spain who participated in TIMSS were analyzed to answer the research questions in this study. In both countries, girls showed an advantage over boys on life science items and most extended response items, whereas boys, by and large, had an advantage on earth science, physics, and chemistry items. However, even within areas that favored boys, such as physics, there were items that were differentially easier for girls. In general, patterns in gender differences were similar across both countries although there were a few differences between the countries on individual items. It was concluded that simply looking at mean differences does not provide an adequate understanding of the nature of gender differences in science achievement.

Applying Item Response Theory methods to design a learning progression-based science assessment

Science.gov (United States)

Chen, Jing

Learning progressions are used to describe how students' understanding of a topic progresses over time and to classify the progress of students into steps or levels. This study applies Item Response Theory (IRT) based methods to investigate how to design learning progression-based science assessments. The research questions of this study are: (1) how to use items in different formats to classify students into levels on the learning progression, (2) how to design a test to give good information about students' progress through the learning progression of a particular construct and (3) what characteristics of test items support their use for assessing students' levels. Data used for this study were collected from 1500 elementary and secondary school students during 2009--2010. The written assessment was developed in several formats such as the Constructed Response (CR) items, Ordered Multiple Choice (OMC) and Multiple True or False (MTF) items. The followings are the main findings from this study. The OMC, MTF and CR items might measure different components of the construct. A single construct explained most of the variance in students' performances. However, additional dimensions in terms of item format can explain certain amount of the variance in student performance. So additional dimensions need to be considered when we want to capture the differences in students' performances on different types of items targeting the understanding of the same underlying progression. Items in each item format need to be improved in certain ways to classify students more accurately into the learning progression levels. This study establishes some general steps that can be followed to design other learning progression-based tests as well. For example, first, the boundaries between levels on the IRT scale can be defined by using the means of the item thresholds across a set of good items. Second, items in multiple formats can be selected to achieve the information criterion at all

Intentional Forgetting Reduces Color-Naming Interference: Evidence from Item-Method Directed Forgetting

Science.gov (United States)

Lee, Yuh-shiow; Lee, Huang-mou; Fawcett, Jonathan M.

2013-01-01

In an item-method-directed forgetting task, Chinese words were presented individually, each followed by an instruction to remember or forget. Colored probe items were presented following each memory instruction requiring a speeded color-naming response. Half of the probe items were novel and unrelated to the preceding study item, whereas the…

The Long-Term Conditions Questionnaire: conceptual framework and item development.

Science.gov (United States)

Peters, Michele; Potter, Caroline M; Kelly, Laura; Hunter, Cheryl; Gibbons, Elizabeth; Jenkinson, Crispin; Coulter, Angela; Forder, Julien; Towers, Ann-Marie; A'Court, Christine; Fitzpatrick, Ray

2016-01-01

To identify the main issues of importance when living with long-term conditions to refine a conceptual framework for informing the item development of a patient-reported outcome measure for long-term conditions. Semi-structured qualitative interviews (n=48) were conducted with people living with at least one long-term condition. Participants were recruited through primary care. The interviews were transcribed verbatim and analyzed by thematic analysis. The analysis served to refine the conceptual framework, based on reviews of the literature and stakeholder consultations, for developing candidate items for a new measure for long-term conditions. Three main organizing concepts were identified: impact of long-term conditions, experience of services and support, and self-care. The findings helped to refine a conceptual framework, leading to the development of 23 items that represent issues of importance in long-term conditions. The 23 candidate items formed the first draft of the measure, currently named the Long-Term Conditions Questionnaire. The aim of this study was to refine the conceptual framework and develop items for a patient-reported outcome measure for long-term conditions, including single and multiple morbidities and physical and mental health conditions. Qualitative interviews identified the key themes for assessing outcomes in long-term conditions, and these underpinned the development of the initial draft of the measure. These initial items will undergo cognitive testing to refine the items prior to further validation in a survey.

Using a Linear Regression Method to Detect Outliers in IRT Common Item Equating

Science.gov (United States)

He, Yong; Cui, Zhongmin; Fang, Yu; Chen, Hanwei

2013-01-01

Common test items play an important role in equating alternate test forms under the common item nonequivalent groups design. When the item response theory (IRT) method is applied in equating, inconsistent item parameter estimates among common items can lead to large bias in equated scores. It is prudent to evaluate inconsistency in parameter…

The impact of item order on ratings of cancer risk perception.

Science.gov (United States)

Taylor, Kathryn L; Shelby, Rebecca A; Schwartz, Marc D; Ackerman, Josh; LaSalle, V Holland; Gelmann, Edward P; McGuire, Colleen

2002-07-01

Although perceived risk is central to most theories of health behavior, there is little consensus on its measurement with regard to item wording, response set, or the number of items to include. In a methodological assessment of perceived risk, we assessed the impact of changing the order of three commonly used perceived risk items: quantitative personal risk, quantitative population risk, and comparative risk. Participants were 432 men and women enrolled in an ancillary study of the Prostate, Lung, Colorectal, and Ovarian Cancer Screening Trial. Three groups of consecutively enrolled participants responded to the three items in one of three question orders. Results indicated that item order was related to the perceived risk ratings of both ovarian (P Perceptions of risk were significantly lower when the comparative rating was made first. The findings suggest that compelling participants to consider their own risk relative to the risk of others results in lower ratings of perceived risk. Although the use of multiple items may provide more information than when only a single method is used, different conclusions may be reached depending on the context in which an item is assessed.

Representation of Item Position in Immediate Serial Recall: Evidence from Intrusion Errors

Science.gov (United States)

Fischer-Baum, Simon; McCloskey, Michael

2015-01-01

In immediate serial recall, participants are asked to recall novel sequences of items in the correct order. Theories of the representations and processes required for this task differ in how order information is maintained; some have argued that order is represented through item-to-item associations, while others have argued that each item is…

The Dif Identification in Constructed Response Items Using Partial Credit Model

OpenAIRE

Heri Retnawati

2017-01-01

The study was to identify the load, the type and the significance of differential item functioning (DIF) in constructed response item using the partial credit model (PCM). The data in the study were the students’ instruments and the students’ responses toward the PISA-like test items that had been completed by 386 ninth grade students and 460 tenth grade students who had been about 15 years old in the Province of Yogyakarta Special Region in Indonesia. The analysis toward the item characteris...

Development of the PROMIS positive emotional and sensory expectancies of smoking item banks.

Science.gov (United States)

Tucker, Joan S; Shadel, William G; Edelen, Maria Orlando; Stucky, Brian D; Li, Zhen; Hansen, Mark; Cai, Li

2014-09-01

The positive emotional and sensory expectancies of cigarette smoking include improved cognitive abilities, positive affective states, and pleasurable sensorimotor sensations. This paper describes development of Positive Emotional and Sensory Expectancies of Smoking item banks that will serve to standardize the assessment of this construct among daily and nondaily cigarette smokers. Data came from daily (N = 4,201) and nondaily (N =1,183) smokers who completed an online survey. To identify a unidimensional set of items, we conducted item factor analyses, item response theory analyses, and differential item functioning analyses. Additionally, we evaluated the performance of fixed-item short forms (SFs) and computer adaptive tests (CATs) to efficiently assess the construct. Eighteen items were included in the item banks (15 common across daily and nondaily smokers, 1 unique to daily, 2 unique to nondaily). The item banks are strongly unidimensional, highly reliable (reliability = 0.95 for both), and perform similarly across gender, age, and race/ethnicity groups. A SF common to daily and nondaily smokers consists of 6 items (reliability = 0.86). Results from simulated CATs indicated that, on average, less than 8 items are needed to assess the construct with adequate precision using the item banks. These analyses identified a new set of items that can assess the positive emotional and sensory expectancies of smoking in a reliable and standardized manner. Considerable efficiency in assessing this construct can be achieved by using the item bank SF, employing computer adaptive tests, or selecting subsets of items tailored to specific research or clinical purposes. © The Author 2014. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Secondary Psychometric Examination of the Dimensional Obsessive-Compulsive Scale: Classical Testing, Item Response Theory, and Differential Item Functioning.

Science.gov (United States)

Thibodeau, Michel A; Leonard, Rachel C; Abramowitz, Jonathan S; Riemann, Bradley C

2015-12-01

The Dimensional Obsessive-Compulsive Scale (DOCS) is a promising measure of obsessive-compulsive disorder (OCD) symptoms but has received minimal psychometric attention. We evaluated the utility and reliability of DOCS scores. The study included 832 students and 300 patients with OCD. Confirmatory factor analysis supported the originally proposed four-factor structure. DOCS total and subscale scores exhibited good to excellent internal consistency in both samples (α = .82 to α = .96). Patient DOCS total scores reduced substantially during treatment (t = 16.01, d = 1.02). DOCS total scores discriminated between students and patients (sensitivity = 0.76, 1 - specificity = 0.23). The measure did not exhibit gender-based differential item functioning as tested by Mantel-Haenszel chi-square tests. Expected response options for each item were plotted as a function of item response theory and demonstrated that DOCS scores incrementally discriminate OCD symptoms ranging from low to extremely high severity. Incremental differences in DOCS scores appear to represent unbiased and reliable differences in true OCD symptom severity. © The Author(s) 2014.

Optimal lot sizing in screening processes with returnable defective items

Science.gov (United States)

Vishkaei, Behzad Maleki; Niaki, S. T. A.; Farhangi, Milad; Rashti, Mehdi Ebrahimnezhad Moghadam

2014-07-01

This paper is an extension of Hsu and Hsu (Int J Ind Eng Comput 3(5):939-948, 2012) aiming to determine the optimal order quantity of product batches that contain defective items with percentage nonconforming following a known probability density function. The orders are subject to 100 % screening process at a rate higher than the demand rate. Shortage is backordered, and defective items in each ordering cycle are stored in a warehouse to be returned to the supplier when a new order is received. Although the retailer does not sell defective items at a lower price and only trades perfect items (to avoid loss), a higher holding cost incurs to store defective items. Using the renewal-reward theorem, the optimal order and shortage quantities are determined. Some numerical examples are solved at the end to clarify the applicability of the proposed model and to compare the new policy to an existing one. The results show that the new policy provides better expected profit per time.

Optimizing incomplete sample designs for item response model parameters

NARCIS (Netherlands)

van der Linden, Willem J.

Several models for optimizing incomplete sample designs with respect to information on the item parameters are presented. The following cases are considered: (1) known ability parameters; (2) unknown ability parameters; (3) item sets with multiple ability scales; and (4) response models with

Using Reversed MFCC and IT-EM for Automatic Speaker Verification

Directory of Open Access Journals (Sweden)

Sheeraz Memon

2012-01-01

Full Text Available This paper proposes text independent automatic speaker verification system using IMFCC (Inverse/ Reverse Mel Frequency Coefficients and IT-EM (Information Theoretic Expectation Maximization. To perform speaker verification, feature extraction using Mel scale has been widely applied and has established better results. The IMFCC is based on inverse Mel-scale. The IMFCC effectively captures information available at the high frequency formants which is ignored by the MFCC. In this paper the fusion of MFCC and IMFCC at input level is proposed. GMMs (Gaussian Mixture Models based on EM (Expectation Maximization have been widely used for classification of text independent verification. However EM comes across the convergence issue. In this paper we use our proposed IT-EM which has faster convergence, to train speaker models. IT-EM uses information theory principles such as PDE (Parzen Density Estimation and KL (Kullback-Leibler divergence measure. IT-EM acclimatizes the weights, means and covariances, like EM. However, IT-EM process is not performed on feature vector sets but on a set of centroids obtained using IT (Information Theoretic metric. The IT-EM process at once diminishes divergence measure between PDE estimates of features distribution within a given class and the centroids distribution within the same class. The feature level fusion and IT-EM is tested for the task of speaker verification using NIST2001 and NIST2004. The experimental evaluation validates that MFCC/IMFCC has better results than the conventional delta/MFCC feature set. The MFCC/IMFCC feature vector size is also much smaller than the delta MFCC thus reducing the computational burden as well. IT-EM method also showed faster convergence, than the conventional EM method, and thus it leads to higher speaker recognition scores.

Designing a Virtual Item Bank Based on the Techniques of Image Processing

Science.gov (United States)

Liao, Wen-Wei; Ho, Rong-Guey

2011-01-01

One of the major weaknesses of the item exposure rates of figural items in Intelligence Quotient (IQ) tests lies in its inaccuracies. In this study, a new approach is proposed and a useful test tool known as the Virtual Item Bank (VIB) is introduced. The VIB combine Automatic Item Generation theory and image processing theory with the concepts of…

[Essential data set's archetypes for nursing care of endometriosis patients].

Science.gov (United States)

Spigolon, Dandara Novakowski; Moro, Claudia Maria Cabral

2012-12-01

This study aimed to develop an Essential Data Set for Nursing Care of Patients with Endometriosis (CDEEPE), represented by archetypes. An exploratory applied research with specialists' participation that was carried out at Heath Informatics Laboratory of PUCPR, between February and November of 2010. It was divided in two stages: CDEEPE construction and evaluation including Nursing Process phases and Basic Human Needs, and archetypes development based on this data set. CDEEPE was evaluated by doctors and nurses with 95.9% of consensus and containing 51 data items. The archetype "Perception of Organs and Senses" was created to represents this data set. This study allowed identifying important information for nursing practices contributing to computerization and application of nursing process during care. The CDEEPE was the basis for archetype creation, that will make possible structured, organized, efficient, interoperable, and semantics records.

Using Patient Health Questionnaire-9 item parameters of a common metric resulted in similar depression scores compared to independent item response theory model reestimation.

Science.gov (United States)

Liegl, Gregor; Wahl, Inka; Berghöfer, Anne; Nolte, Sandra; Pieh, Christoph; Rose, Matthias; Fischer, Felix

2016-03-01

To investigate the validity of a common depression metric in independent samples. We applied a common metrics approach based on item-response theory for measuring depression to four German-speaking samples that completed the Patient Health Questionnaire (PHQ-9). We compared the PHQ item parameters reported for this common metric to reestimated item parameters that derived from fitting a generalized partial credit model solely to the PHQ-9 items. We calibrated the new model on the same scale as the common metric using two approaches (estimation with shifted prior and Stocking-Lord linking). By fitting a mixed-effects model and using Bland-Altman plots, we investigated the agreement between latent depression scores resulting from the different estimation models. We found different item parameters across samples and estimation methods. Although differences in latent depression scores between different estimation methods were statistically significant, these were clinically irrelevant. Our findings provide evidence that it is possible to estimate latent depression scores by using the item parameters from a common metric instead of reestimating and linking a model. The use of common metric parameters is simple, for example, using a Web application (http://www.common-metrics.org) and offers a long-term perspective to improve the comparability of patient-reported outcome measures. Copyright © 2016 Elsevier Inc. All rights reserved.

Survey of the capacity for essential surgery and anaesthesia services in Papua New Guinea

Science.gov (United States)

Martin, Janet; Tau, Goa; Cherian, Meena Nathan; Vergel de Dios, Jennifer; Mills, David; Fitzpatrick, Jane; Adu-Krow, William; Cheng, Davy

2015-01-01

Objective To assess capacity to provide essential surgical services including emergency, obstetric and anaesthesia care in Papua New Guinea (PNG) in order to support planning for relevant post-2015 sustainable development goals for PNG. Design Cross-sectional survey. Setting Hospitals and health facilities in PNG. Participants 21 facilities including 3 national/provincial hospitals, 11 district/rural hospitals, and 7 health centres. Outcome measures The WHO Situational Analysis Tool to Assess Emergency and Essential Surgical Care (WHO-SAT) was used to measure each participating facility's capacity to deliver essential surgery and anaesthesia services, including 108 items related to relevant infrastructure, human resources, interventions and equipment. Results While major surgical procedures were provided at each hospital, fewer than 30% had uninterrupted access to oxygen, and 57% had uninterrupted access to resuscitation bag and mask. Most hospitals reported capacity to provide general anaesthesia, though few hospitals reported having at least one certified surgeon, obstetrician and anaesthesiologist. Access to anaesthetic machines, pulse oximetry and blood bank was severely limited. Many non-hospital health centres providing basic surgical procedures, but almost none had uninterrupted access to electricity, running water, oxygen and basic supplies for resuscitation, airway management and obstetric services. Conclusions Capacity for essential surgery and anaesthesia services is severely limited in PNG due to shortfalls in physical infrastructure, human resources, and basic equipment and supplies. Achieving post-2015 sustainable development goals, including universal healthcare, will require significant investment in surgery and anaesthesia capacity in PNG. PMID:26674504

48 CFR 46.202-1 - Contracts for commercial items.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Contracts for commercial... CONTRACT MANAGEMENT QUALITY ASSURANCE Contract Quality Requirements 46.202-1 Contracts for commercial items. When acquiring commercial items (see part 12), the Government shall rely on contractors' existing...

Algorithms for computerized test construction using classical item parameters

NARCIS (Netherlands)

Adema, Jos J.; van der Linden, Willem J.

1989-01-01

Recently, linear programming models for test construction were developed. These models were based on the information function from item response theory. In this paper another approach is followed. Two 0-1 linear programming models for the construction of tests using classical item and test

Methodology for the development and calibration of the SCI-QOL item banks.

Science.gov (United States)

Tulsky, David S; Kisala, Pamela A; Victorson, David; Choi, Seung W; Gershon, Richard; Heinemann, Allen W; Cella, David

2015-05-01

To develop a comprehensive, psychometrically sound, and conceptually grounded patient reported outcomes (PRO) measurement system for individuals with spinal cord injury (SCI). Individual interviews (n=44) and focus groups (n=65 individuals with SCI and n=42 SCI clinicians) were used to select key domains for inclusion and to develop PRO items. Verbatim items from other cutting-edge measurement systems (i.e. PROMIS, Neuro-QOL) were included to facilitate linkage and cross-population comparison. Items were field tested in a large sample of individuals with traumatic SCI (n=877). Dimensionality was assessed with confirmatory factor analysis. Local item dependence and differential item functioning were assessed, and items were calibrated using the item response theory (IRT) graded response model. Finally, computer adaptive tests (CATs) and short forms were administered in a new sample (n=245) to assess test-retest reliability and stability. A calibration sample of 877 individuals with traumatic SCI across five SCI Model Systems sites and one Department of Veterans Affairs medical center completed SCI-QOL items in interview format. We developed 14 unidimensional calibrated item banks and 3 calibrated scales across physical, emotional, and social health domains. When combined with the five Spinal Cord Injury--Functional Index physical function banks, the final SCI-QOL system consists of 22 IRT-calibrated item banks/scales. Item banks may be administered as CATs or short forms. Scales may be administered in a fixed-length format only. The SCI-QOL measurement system provides SCI researchers and clinicians with a comprehensive, relevant and psychometrically robust system for measurement of physical-medical, physical-functional, emotional, and social outcomes. All SCI-QOL instruments are freely available on Assessment CenterSM.

Reduced-Item Food Audits Based on the Nutrition Environment Measures Surveys.

Science.gov (United States)

Partington, Susan N; Menzies, Tim J; Colburn, Trina A; Saelens, Brian E; Glanz, Karen

2015-10-01

The community food environment may contribute to obesity by influencing food choice. Store and restaurant audits are increasingly common methods for assessing food environments, but are time consuming and costly. A valid, reliable brief measurement tool is needed. The purpose of this study was to develop and validate reduced-item food environment audit tools for stores and restaurants. Nutrition Environment Measures Surveys for stores (NEMS-S) and restaurants (NEMS-R) were completed in 820 stores and 1,795 restaurants in West Virginia, San Diego, and Seattle. Data mining techniques (correlation-based feature selection and linear regression) were used to identify survey items highly correlated to total survey scores and produce reduced-item audit tools that were subsequently validated against full NEMS surveys. Regression coefficients were used as weights that were applied to reduced-item tool items to generate comparable scores to full NEMS surveys. Data were collected and analyzed in 2008-2013. The reduced-item tools included eight items for grocery, ten for convenience, seven for variety, and five for other stores; and 16 items for sit-down, 14 for fast casual, 19 for fast food, and 13 for specialty restaurants-10% of the full NEMS-S and 25% of the full NEMS-R. There were no significant differences in median scores for varying types of retail food outlets when compared to the full survey scores. Median in-store audit time was reduced 25%-50%. Reduced-item audit tools can reduce the burden and complexity of large-scale or repeated assessments of the retail food environment without compromising measurement quality. Copyright © 2015 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Single-Item Measurement of Suicidal Behaviors: Validity and Consequences of Misclassification.

Directory of Open Access Journals (Sweden)

Alexander J Millner

Full Text Available Suicide is a leading cause of death worldwide. Although research has made strides in better defining suicidal behaviors, there has been less focus on accurate measurement. Currently, the widespread use of self-report, single-item questions to assess suicide ideation, plans and attempts may contribute to measurement problems and misclassification. We examined the validity of single-item measurement and the potential for statistical errors. Over 1,500 participants completed an online survey containing single-item questions regarding a history of suicidal behaviors, followed by questions with more precise language, multiple response options and narrative responses to examine the validity of single-item questions. We also conducted simulations to test whether common statistical tests are robust against the degree of misclassification produced by the use of single-items. We found that 11.3% of participants that endorsed a single-item suicide attempt measure engaged in behavior that would not meet the standard definition of a suicide attempt. Similarly, 8.8% of those who endorsed a single-item measure of suicide ideation endorsed thoughts that would not meet standard definitions of suicide ideation. Statistical simulations revealed that this level of misclassification substantially decreases statistical power and increases the likelihood of false conclusions from statistical tests. Providing a wider range of response options for each item reduced the misclassification rate by approximately half. Overall, the use of single-item, self-report questions to assess the presence of suicidal behaviors leads to misclassification, increasing the likelihood of statistical decision errors. Improving the measurement of suicidal behaviors is critical to increase understanding and prevention of suicide.

Item Purification Does Not Always Improve DIF Detection: A Counterexample with Angoff's Delta Plot

Science.gov (United States)

Magis, David; Facon, Bruno

2013-01-01

Item purification is an iterative process that is often advocated as improving the identification of items affected by differential item functioning (DIF). With test-score-based DIF detection methods, item purification iteratively removes the items currently flagged as DIF from the test scores to get purified sets of items, unaffected by DIF. The…

Statistical Indexes for Monitoring Item Behavior under Computer Adaptive Testing Environment.

Science.gov (United States)

Zhu, Renbang; Yu, Feng; Liu, Su

A computerized adaptive test (CAT) administration usually requires a large supply of items with accurately estimated psychometric properties, such as item response theory (IRT) parameter estimates, to ensure the precision of examinee ability estimation. However, an estimated IRT model of a given item in any given pool does not always correctly…

41 CFR 101-26.103-2 - Restriction on personal convenience items.

Science.gov (United States)

2010-07-01

... convenience items. 101-26.103-2 Section 101-26.103-2 Public Contracts and Property Management Federal Property... SOURCES AND PROGRAM 26.1-General § 101-26.103-2 Restriction on personal convenience items. Government... type items intended solely for the personal convenience or to satisfy the personal desire of an...

Using Item Response Theory to Describe the Nonverbal Literacy Assessment (NVLA)

Science.gov (United States)

Fleming, Danielle; Wilson, Mark; Ahlgrim-Delzell, Lynn

2018-01-01

The Nonverbal Literacy Assessment (NVLA) is a literacy assessment designed for students with significant intellectual disabilities. The 218-item test was initially examined using confirmatory factor analysis. This method showed that the test worked as expected, but the items loaded onto a single factor. This article uses item response theory to…

Developing and testing items for the South African Personality Inventory (SAPI

Directory of Open Access Journals (Sweden)

Carin Hill

2013-11-01

Research purpose: This article reports on the process of identifying items for, and provides a quantitative evaluation of, the South African Personality Inventory (SAPI items. Motivation for the study: The study intended to develop an indigenous and psychometrically sound personality instrument that adheres to the requirements of South African legislation and excludes cultural bias. Research design, approach and method: The authors used a cross-sectional design. They measured the nine SAPI clusters identified in the qualitative stage of the SAPI project in 11 separate quantitative studies. Convenience sampling yielded 6735 participants. Statistical analysis focused on the construct validity and reliability of items. The authors eliminated items that showed poor performance, based on common psychometric criteria, and selected the best performing items to form part of the final version of the SAPI. Main findings: The authors developed 2573 items from the nine SAPI clusters. Of these, 2268 items were valid and reliable representations of the SAPI facets. Practical/managerial implications: The authors developed a large item pool. It measures personality in South Africa. Researchers can refine it for the SAPI. Furthermore, the project illustrates an approach that researchers can use in projects that aim to develop culturally-informed psychological measures. Contribution/value-add: Personality assessment is important for recruiting, selecting and developing employees. This study contributes to the current knowledge about the early processes researchers follow when they develop a personality instrument that measures personality fairly in different cultural groups, as the SAPI does.

Astronomy essentials

CERN Document Server

Brass, Charles O

2012-01-01

REA's Essentials provide quick and easy access to critical information in a variety of different fields, ranging from the most basic to the most advanced. As its name implies, these concise, comprehensive study guides summarize the essentials of the field covered. Essentials are helpful when preparing for exams, doing homework and will remain a lasting reference source for students, teachers, and professionals. Astronomy includes the historical perspective of astronomy, sky basics and the celestial coordinate systems, a model and the origin of the solar system, the sun, the planets, Kepler'

Validity and Reliability of the 8-Item Work Limitations Questionnaire.

Science.gov (United States)

Walker, Timothy J; Tullar, Jessica M; Diamond, Pamela M; Kohl, Harold W; Amick, Benjamin C

2017-12-01

Purpose To evaluate factorial validity, scale reliability, test-retest reliability, convergent validity, and discriminant validity of the 8-item Work Limitations Questionnaire (WLQ) among employees from a public university system. Methods A secondary analysis using de-identified data from employees who completed an annual Health Assessment between the years 2009-2015 tested research aims. Confirmatory factor analysis (CFA) (n = 10,165) tested the latent structure of the 8-item WLQ. Scale reliability was determined using a CFA-based approach while test-retest reliability was determined using the intraclass correlation coefficient. Convergent/discriminant validity was tested by evaluating relations between the 8-item WLQ with health/performance variables for convergent validity (health-related work performance, number of chronic conditions, and general health) and demographic variables for discriminant validity (gender and institution type). Results A 1-factor model with three correlated residuals demonstrated excellent model fit (CFI = 0.99, TLI = 0.99, RMSEA = 0.03, and SRMR = 0.01). The scale reliability was acceptable (0.69, 95% CI 0.68-0.70) and the test-retest reliability was very good (ICC = 0.78). Low-to-moderate associations were observed between the 8-item WLQ and the health/performance variables while weak associations were observed between the demographic variables. Conclusions The 8-item WLQ demonstrated sufficient reliability and validity among employees from a public university system. Results suggest the 8-item WLQ is a usable alternative for studies when the more comprehensive 25-item WLQ is not available.

The Stanford Leisure-Time Activity Categorical Item (L-Cat): a single categorical item sensitive to physical activity changes in overweight/obese women.

Science.gov (United States)

Kiernan, M; Schoffman, D E; Lee, K; Brown, S D; Fair, J M; Perri, M G; Haskell, W L

2013-12-01

Physical activity is essential for chronic disease prevention, yet Cat) is a single item comprising six descriptive categories ranging from inactive to very active. This novel methodological approach assesses national activity recommendations as well as multiple clinically relevant categories below and above the recommendations, and incorporates critical methodological principles that enhance psychometrics (reliability, validity and sensitivity to change). We evaluated the L-Cat's psychometrics among 267 overweight/obese women who were asked to meet the national activity recommendations in a randomized behavioral weight-loss trial. The L-Cat had excellent test-retest reliability (κ=0.64, PCat category at 6 months was associated with 1059 more daily pedometer steps (95% CI 712-1407, β=0.38, PCat categories differentiated from each other in a dose-response gradient for steps and weight loss (PsCat was sensitive to change in response to the trial's activity component. Women increased one L-Cat category at 6 months (M=1.0±1.4, PCat categories at 6 months lost more weight than those who did not (M=-4.6%, 95% CI -6.7 to -2.5, PCat has timely potential for clinical use such as tracking activity changes via electronic medical records, especially among overweight/obese populations who are unable or unlikely to reach national recommendations.

Application of Item Response Theory to Tests of Substance-related Associative Memory

Science.gov (United States)

Shono, Yusuke; Grenard, Jerry L.; Ames, Susan L.; Stacy, Alan W.

2015-01-01

A substance-related word association test (WAT) is one of the commonly used indirect tests of substance-related implicit associative memory and has been shown to predict substance use. This study applied an item response theory (IRT) modeling approach to evaluate psychometric properties of the alcohol- and marijuana-related WATs and their items among 775 ethnically diverse at-risk adolescents. After examining the IRT assumptions, item fit, and differential item functioning (DIF) across gender and age groups, the original 18 WAT items were reduced to 14- and 15-items in the alcohol- and marijuana-related WAT, respectively. Thereafter, unidimensional one- and two-parameter logistic models (1PL and 2PL models) were fitted to the revised WAT items. The results demonstrated that both alcohol- and marijuana-related WATs have good psychometric properties. These results were discussed in light of the framework of a unified concept of construct validity (Messick, 1975, 1989, 1995). PMID:25134051

Development and validation of a ten-item questionnaire with explanatory illustrations to assess upper extremity disorders: favorable effect of illustrations in the item reduction process.

Science.gov (United States)

Kurimoto, Shigeru; Suzuki, Mikako; Yamamoto, Michiro; Okui, Nobuyuki; Imaeda, Toshihiko; Hirata, Hitoshi

2011-11-01

The purpose of this study is to develop a short and valid measure for upper extremity disorders and to assess the effect of attached illustrations in item reduction of a self-administered disability questionnaire while retaining psychometric properties. A validated questionnaire used to assess upper extremity disorders, the Hand20, was reduced to ten items using two item-reduction techniques. The psychometric properties of the abbreviated form, the Hand10, were evaluated on an independent sample that was used for the shortening process. Validity, reliability, and responsiveness of the Hand10 were retained in the item reduction process. It was possible that the use of explanatory illustrations attached to the Hand10 helped with its reproducibility. The illustrations for the Hand10 promoted text comprehension and motivation to answer the items. These changes resulted in high acceptability; more than 99.3% of patients, including 98.5% of elderly patients, could complete the Hand10 properly. The illustrations had favorable effects on the item reduction process and made it possible to retain precision of the instrument. The Hand10 is a reliable and valid instrument for individual-level applications with the advantage of being compact and broadly applicable, even in elderly individuals.

Effects of Reducing the Cognitive Load of Mathematics Test Items on Student Performance

Directory of Open Access Journals (Sweden)

Susan C. Gillmor

2015-01-01

Full Text Available This study explores a new item-writing framework for improving the validity of math assessment items. The authors transfer insights from Cognitive Load Theory (CLT, traditionally used in instructional design, to educational measurement. Fifteen, multiple-choice math assessment items were modified using research-based strategies for reducing extraneous cognitive load. An experimental design with 222 middle-school students tested the effects of the reduced cognitive load items on student performance and anxiety. Significant findings confirm the main research hypothesis that reducing the cognitive load of math assessment items improves student performance. Three load-reducing item modifications are identified as particularly effective for reducing item difficulty: signalling important information, aesthetic item organization, and removing extraneous content. Load reduction was not shown to impact student anxiety. Implications for classroom assessment and future research are discussed.

Response Mixture Modeling: Accounting for Heterogeneity in Item Characteristics across Response Times.

Science.gov (United States)

Molenaar, Dylan; de Boeck, Paul

2018-06-01

In item response theory modeling of responses and response times, it is commonly assumed that the item responses have the same characteristics across the response times. However, heterogeneity might arise in the data if subjects resort to different response processes when solving the test items. These differences may be within-subject effects, that is, a subject might use a certain process on some of the items and a different process with different item characteristics on the other items. If the probability of using one process over the other process depends on the subject's response time, within-subject heterogeneity of the item characteristics across the response times arises. In this paper, the method of response mixture modeling is presented to account for such heterogeneity. Contrary to traditional mixture modeling where the full response vectors are classified, response mixture modeling involves classification of the individual elements in the response vector. In a simulation study, the response mixture model is shown to be viable in terms of parameter recovery. In addition, the response mixture model is applied to a real dataset to illustrate its use in investigating within-subject heterogeneity in the item characteristics across response times.

Prevalence of item level negative symptoms in first episode psychosis diagnoses.

LENUS (Irish Health Repository)

Lyne, John

2012-03-01

The relevance of negative symptoms across the diagnostic spectrum of the psychoses remains uncertain. The purpose of this study was to report on prevalence of item and subscale level negative symptoms across the first episode psychosis (FEP) diagnostic spectrum in an epidemiological sample, and to ascertain whether items and subscales were more prevalent in a schizophrenia spectrum diagnoses group compared to an \\'all other psychotic diagnoses\\' group. We measured negative symptoms in 330 patients presenting with FEP using the Scale for Assessment of Negative Symptoms (SANS), and ascertained diagnosis using the Structured Clinical Interview for DSM IV. Prevalence of SANS items and subscales were tabulated across all psychotic diagnoses, and logistic regression analysis determined which items and subscales were predictive of schizophrenia spectrum diagnoses. SANS items were most prevalent in schizophrenia spectrum conditions but frequently presented in other FEP diagnoses, particularly substance induced psychotic disorder and Major Depressive Disorder. Brief psychotic disorder and bipolar disorders had low levels of negative symptoms. SANS items and subscales which significantly predicted schizophrenia spectrum diagnoses, were also frequently present in some of the other psychotic diagnoses. Conclusions: SANS items have high prevalence in FEP, and while commonest in schizophrenia spectrum conditions are not restricted to this diagnostic subgroup.

ABORTION ATTITUDES, 1984-1987-1988 - EFFECTS OF ITEM ORDER AND DIMENSIONALITY

NARCIS (Netherlands)

TENVERGERT, E; GILLESPIE, MW; KINGMA, J; KLASEN, H

The comparability of surveys is often hampered by differences in the item order of presentation. The major focus of the present study was to investigate whether a general item or a specific item at the beginning of the questionnaire would affect the endorsement as well as the scalability of a set of

The Effects of Goal Relevance and Perceptual Features on Emotional Items and Associative Memory.

Science.gov (United States)

Mao, Wei B; An, Shu; Yang, Xiao F

2017-01-01

Showing an emotional item in a neutral background scene often leads to enhanced memory for the emotional item and impaired associative memory for background details. Meanwhile, both top-down goal relevance and bottom-up perceptual features played important roles in memory binding. We conducted two experiments and aimed to further examine the effects of goal relevance and perceptual features on emotional items and associative memory. By manipulating goal relevance (asking participants to categorize only each item image as living or non-living or to categorize each whole composite picture consisted of item image and background scene as natural scene or manufactured scene) and perceptual features (controlling visual contrast and visual familiarity) in two experiments, we found that both high goal relevance and salient perceptual features (high salience of items vs. high familiarity of items) could promote emotional item memory, but they had different effects on associative memory for emotional items and neutral backgrounds. Specifically, high goal relevance and high perceptual-salience of items could jointly impair the associative memory for emotional items and neutral backgrounds, while the effect of item familiarity on associative memory for emotional items would be modulated by goal relevance. High familiarity of items could increase associative memory for negative items and neutral backgrounds only in the low goal relevance condition. These findings suggest the effect of emotion on associative memory is not only related to attentional capture elicited by emotion, but also can be affected by goal relevance and perceptual features of stimulus.

Linking Existing Instruments to Develop an Activity of Daily Living Item Bank.

Science.gov (United States)

Li, Chih-Ying; Romero, Sergio; Bonilha, Heather S; Simpson, Kit N; Simpson, Annie N; Hong, Ickpyo; Velozo, Craig A

2018-03-01

This study examined dimensionality and item-level psychometric properties of an item bank measuring activities of daily living (ADL) across inpatient rehabilitation facilities and community living centers. Common person equating method was used in the retrospective veterans data set. This study examined dimensionality, model fit, local independence, and monotonicity using factor analyses and fit statistics, principal component analysis (PCA), and differential item functioning (DIF) using Rasch analysis. Following the elimination of invalid data, 371 veterans who completed both the Functional Independence Measure (FIM) and minimum data set (MDS) within 6 days were retained. The FIM-MDS item bank demonstrated good internal consistency (Cronbach's α = .98) and met three rating scale diagnostic criteria and three of the four model fit statistics (comparative fit index/Tucker-Lewis index = 0.98, root mean square error of approximation = 0.14, and standardized root mean residual = 0.07). PCA of Rasch residuals showed the item bank explained 94.2% variance. The item bank covered the range of θ from -1.50 to 1.26 (item), -3.57 to 4.21 (person) with person strata of 6.3. The findings indicated the ADL physical function item bank constructed from FIM and MDS measured a single latent trait with overall acceptable item-level psychometric properties, suggesting that it is an appropriate source for developing efficient test forms such as short forms and computerized adaptive tests.

SHIPPING OF RADIOACTIVE ITEMS

CERN Multimedia

TIS/RP Group

2001-01-01

The TIS-RP group informs users that shipping of small radioactive items is normally guaranteed within 24 hours from the time the material is handed in at the TIS-RP service. This time is imposed by the necessary procedures (identification of the radionuclides, determination of dose rate, preparation of the package and related paperwork). Large and massive objects require a longer procedure and will therefore take longer.

Item Response Theory analysis of Fagerström Test for Cigarette Dependence.

Science.gov (United States)

Svicher, Andrea; Cosci, Fiammetta; Giannini, Marco; Pistelli, Francesco; Fagerström, Karl

2018-02-01

The Fagerström Test for Cigarette Dependence (FTCD) and the Heaviness of Smoking Index (HSI) are the gold standard measures to assess cigarette dependence. However, FTCD reliability and factor structure have been questioned and HSI psychometric properties are in need of further investigations. The present study examined the psychometrics properties of the FTCD and the HSI via the Item Response Theory. The study was a secondary analysis of data collected in 862 Italian daily smokers. Confirmatory factor analysis was run to evaluate the dimensionality of FTCD. A Grade Response Model was applied to FTCD and HSI to verify the fit to the data. Both item and test functioning were analyzed and item statistics, Test Information Function, and scale reliabilities were calculated. Mokken Scale Analysis was applied to estimate homogeneity and Loevinger's coefficients were calculated. The FTCD showed unidimensionality and homogeneity for most of the items and for the total score. It also showed high sensitivity and good reliability from medium to high levels of cigarette dependence, although problems related to some items (i.e., items 3 and 5) were evident. HSI had good homogeneity, adequate item functioning, and high reliability from medium to high levels of cigarette dependence. Significant Differential Item Functioning was found for items 1, 4, 5 of the FTCD and for both items of HSI. HSI seems highly recommended in clinical settings addressed to heavy smokers while FTCD would be better used in smokers with a level of cigarette dependence ranging between low and high. Copyright © 2017 Elsevier Ltd. All rights reserved.

Overcoming the effects of differential skewness of test items in scale construction

Directory of Open Access Journals (Sweden)

Johann M. Schepers

2004-10-01

Full Text Available The principal objective of the study was to develop a procedure for overcoming the effects of differential skewness of test items in scale construction. It was shown that the degree of skewness of test items places an upper limit on the correlations between the items, regardless of the contents of the items. If the items are ordered in terms of skewness the resulting inter correlation matrix forms a simplex or a pseudo simplex. Factoring such a matrix results in a multiplicity of factors, most of which are artifacts. A procedure for overcoming this problem was demonstrated with items from the Locus of Control Inventory (Schepers, 1995. The analysis was based on a sample of 1662 first year university students. Opsomming Die hoofdoel van die studie was om ’n prosedure te ontwikkel om die gevolge van differensiële skeefheid van toetsitems, in skaalkonstruksie, teen te werk. Daar is getoon dat die graad van skeefheid van toetsitems ’n boonste grens plaas op die korrelasies tussen die items ongeag die inhoud daarvan. Indien die items gerangskik word volgens graad van skeefheid, sal die interkorrelasiematriks van die items ’n simpleks of pseudosimpleks vorm. Indien so ’n matriks aan faktorontleding onderwerp word, lei dit tot ’n veelheid van faktore waarvan die meerderheid artefakte is. ’n Prosedure om hierdie probleem te bowe te kom, is gedemonstreer met behulp van die items van die Lokus van Beheer-vraelys (Schepers, 1995. Die ontledings is op ’n steekproef van 1662 eerstejaaruniversiteitstudente gebaseer.

Converging evidence for control of color-word Stroop interference at the item level.

Science.gov (United States)

Bugg, Julie M; Hutchison, Keith A

2013-04-01

Prior studies have shown that cognitive control is implemented at the list and context levels in the color-word Stroop task. At first blush, the finding that Stroop interference is reduced for mostly incongruent items as compared with mostly congruent items (i.e., the item-specific proportion congruence [ISPC] effect) appears to provide evidence for yet a third level of control, which modulates word reading at the item level. However, evidence to date favors the view that ISPC effects reflect the rapid prediction of high-contingency responses and not item-specific control. In Experiment 1, we first show that an ISPC effect is obtained when the relevant dimension (i.e., color) signals proportion congruency, a problematic pattern for theories based on differential response contingencies. In Experiment 2, we replicate and extend this pattern by showing that item-specific control settings transfer to new stimuli, ruling out alternative frequency-based accounts. In Experiment 3, we revert to the traditional design in which the irrelevant dimension (i.e., word) signals proportion congruency. Evidence for item-specific control, including transfer of the ISPC effect to new stimuli, is apparent when 4-item sets are employed but not when 2-item sets are employed. We attribute this pattern to the absence of high-contingency responses on incongruent trials in the 4-item set. These novel findings provide converging evidence for reactive control of color-word Stroop interference at the item level, reveal theoretically important factors that modulate reliance on item-specific control versus contingency learning, and suggest an update to the item-specific control account (Bugg, Jacoby, & Chanani, 2011).

Concreteness effects in short-term memory: a test of the item-order hypothesis.

Science.gov (United States)

Roche, Jaclynn; Tolan, G Anne; Tehan, Gerald

2011-12-01

The following experiments explore word length and concreteness effects in short-term memory within an item-order processing framework. This framework asserts order memory is better for those items that are relatively easy to process at the item level. However, words that are difficult to process benefit at the item level for increased attention/resources being applied. The prediction of the model is that differential item and order processing can be detected in episodic tasks that differ in the degree to which item or order memory are required by the task. The item-order account has been applied to the word length effect such that there is a short word advantage in serial recall but a long word advantage in item recognition. The current experiment considered the possibility that concreteness effects might be explained within the same framework. In two experiments, word length (Experiment 1) and concreteness (Experiment 2) are examined using forward serial recall, backward serial recall, and item recognition. These results for word length replicate previous studies showing the dissociation in item and order tasks. The same was not true for the concreteness effect. In all three tasks concrete words were better remembered than abstract words. The concreteness effect cannot be explained in terms of an item-order trade off. PsycINFO Database Record (c) 2011 APA, all rights reserved.

41 CFR 109-1.5109 - Control of sensitive items.

Science.gov (United States)

2010-07-01

... administrative control of sensitive items assigned for general use within an organizational unit as appropriate... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Control of sensitive...-INTRODUCTION 1.51-Personal Property Management Standards and Practices § 109-1.5109 Control of sensitive items...

The development of a single-item Food Choice Questionnaire

NARCIS (Netherlands)

Onwezen, M.C.; Reinders, M.J.; Verain, M.C.D.; Snoek, H.M.

2019-01-01

Based on the multi-item Food Choice Questionnaire (FCQ) originally developed by Steptoe and colleagues (1995), the current study developed a single-item FCQ that provides an acceptable balance between practical needs and psychometric concerns. Studies 1 (N = 1851) and 2 (2a (N = 3290), 2b (N =

Practical Guide to Conducting an Item Response Theory Analysis

Science.gov (United States)

Toland, Michael D.

2014-01-01

Item response theory (IRT) is a psychometric technique used in the development, evaluation, improvement, and scoring of multi-item scales. This pedagogical article provides the necessary information needed to understand how to conduct, interpret, and report results from two commonly used ordered polytomous IRT models (Samejima's graded…

General mixture item response models with different item response structures: Exposition with an application to Likert scales.

Science.gov (United States)

Tijmstra, Jesper; Bolsinova, Maria; Jeon, Minjeong

2018-01-10

This article proposes a general mixture item response theory (IRT) framework that allows for classes of persons to differ with respect to the type of processes underlying the item responses. Through the use of mixture models, nonnested IRT models with different structures can be estimated for different classes, and class membership can be estimated for each person in the sample. If researchers are able to provide competing measurement models, this mixture IRT framework may help them deal with some violations of measurement invariance. To illustrate this approach, we consider a two-class mixture model, where a person's responses to Likert-scale items containing a neutral middle category are either modeled using a generalized partial credit model, or through an IRTree model. In the first model, the middle category ("neither agree nor disagree") is taken to be qualitatively similar to the other categories, and is taken to provide information about the person's endorsement. In the second model, the middle category is taken to be qualitatively different and to reflect a nonresponse choice, which is modeled using an additional latent variable that captures a person's willingness to respond. The mixture model is studied using simulation studies and is applied to an empirical example.

Remembered but Unused: The Accessory Items in Working Memory that Do Not Guide Attention

Science.gov (United States)

Peters, Judith C.; Goebel, Rainer; Roelfsema, Pieter R.

2009-01-01

If we search for an item, a representation of this item in our working memory guides attention to matching items in the visual scene. We can hold multiple items in working memory. Do all these items guide attention in parallel? We asked participants to detect a target object in a stream of objects while they maintained a second item in memory for…

A Markov Chain Monte Carlo Approach to Confirmatory Item Factor Analysis

Science.gov (United States)

Edwards, Michael C.

2010-01-01

Item factor analysis has a rich tradition in both the structural equation modeling and item response theory frameworks. The goal of this paper is to demonstrate a novel combination of various Markov chain Monte Carlo (MCMC) estimation routines to estimate parameters of a wide variety of confirmatory item factor analysis models. Further, I show…

Uncertainties in the Item Parameter Estimates and Robust Automated Test Assembly

Science.gov (United States)

Veldkamp, Bernard P.; Matteucci, Mariagiulia; de Jong, Martijn G.

2013-01-01

Item response theory parameters have to be estimated, and because of the estimation process, they do have uncertainty in them. In most large-scale testing programs, the parameters are stored in item banks, and automated test assembly algorithms are applied to assemble operational test forms. These algorithms treat item parameters as fixed values,…

Informatization of items quality control for NI in nuclear power plant

International Nuclear Information System (INIS)

Zhang Jiankui; Zang Baiqi

2010-01-01

Design ideas, implementation methods and some key techniques for item quality control of NI in nuclear power plant are illustrated in this article according to item quality management mode. The item quality control method can improve the quality of NI, ensure the safety and lower the construction and operation cost of nuclear power plant. (authors)

A Comparison of Multidimensional Item Selection Methods in Simple and Complex Test Designs

Directory of Open Access Journals (Sweden)

Eren Halil ÖZBERK

2017-03-01

Full Text Available In contrast with the previous studies, this study employed various test designs (simple and complex which allow the evaluation of the overall ability score estimations across multiple real test conditions. In this study, four factors were manipulated, namely the test design, number of items per dimension, correlation between dimensions and item selection methods. Using the generated item and ability parameters, dichotomous item responses were generated in by using M3PL compensatory multidimensional IRT model with specified correlations. MCAT composite ability score accuracy was evaluated using absolute bias (ABSBIAS, correlation and the root mean square error (RMSE between true and estimated ability scores. The results suggest that the multidimensional test structure, number of item per dimension and correlation between dimensions had significant effect on item selection methods for the overall score estimations. For simple structure test design it was found that V1 item selection has the lowest absolute bias estimations for both long and short tests while estimating overall scores. As the model gets complex KL item selection method performed better than other two item selection method.

Items to be reflected to the nuclear power safety measures in Japan (concerning the examination, design and operation management) (excluding the items to be reflected to the standards)

Energy Technology Data Exchange (ETDEWEB)

1980-10-01

In connection with the Three Mile Island nuclear power accident in March, 1979, in the United States, in order to introduce the lessons from it in the nuclear power safety regulations in Japan, 52 items to be reflected to the nuclear power safety measures were chosen by the Nuclear Safety Commission. Of these, 16 items were examined by the Committee on Examination of Reactor Safety. It was decided that these results would be introduced in the nuclear safety regulations, by the Nuclear Safety Commission. The following 16 items are described. For the examination, four items concerning the automatic operation of safety systems and others; for the design, five items concerning a small rupture accident, the monitoring of the state of primary coolant, control room layout and others; for the operation management, seven items concerning the inspection at the time of repair, the prevention of faulty handlings by operators and others.

Modelling sequentially scored item responses

NARCIS (Netherlands)

Akkermans, W.

2000-01-01

The sequential model can be used to describe the variable resulting from a sequential scoring process. In this paper two more item response models are investigated with respect to their suitability for sequential scoring: the partial credit model and the graded response model. The investigation is

Dissociative effects of orthographic distinctiveness in pure and mixed lists: an item-order account.

Science.gov (United States)

McDaniel, Mark A; Cahill, Michael; Bugg, Julie M; Meadow, Nathaniel G

2011-10-01

We apply the item-order theory of list composition effects in free recall to the orthographic distinctiveness effect. The item-order account assumes that orthographically distinct items advantage item-specific encoding in both mixed and pure lists, but at the expense of exploiting relational information present in the list. Experiment 1 replicated the typical free recall advantage of orthographically distinct items in mixed lists and the elimination of that advantage in pure lists. Supporting the item-order account, recognition performances indicated that orthographically distinct items received greater item-specific encoding than did orthographically common items in mixed and pure lists (Experiments 1 and 2). Furthermore, order memory (input-output correspondence and sequential contiguity effects) was evident in recall of pure unstructured common lists, but not in recall of unstructured distinct lists (Experiment 1). These combined patterns, although not anticipated by prevailing views, are consistent with an item-order account.

Using personality item characteristics to predict single-item reliability, retest reliability, and self-other agreement

NARCIS (Netherlands)

de Vries, Reinout Everhard; Realo, Anu; Allik, Jüri

2016-01-01

The use of reliability estimates is increasingly scrutinized as scholars become more aware that test–retest stability and self–other agreement provide a better approximation of the theoretical and practical usefulness of an instrument than its internal reliability. In this study, we investigate item

MMPI-2 Item Endorsements in Dissociative Identity Disorder vs. Simulators.

Science.gov (United States)

Brand, Bethany L; Chasson, Gregory S; Palermo, Cori A; Donato, Frank M; Rhodes, Kyle P; Voorhees, Emily F

2016-03-01

Elevated scores on some MMPI-2 (Minnesota Multiphasic Inventory-2) validity scales are common among patients with dissociative identity disorder (DID), which raises questions about the validity of their responses. Such patients show elevated scores on atypical answers (F), F-psychopathology (Fp), atypical answers in the second half of the test (FB), schizophrenia (Sc), and depression (D) scales, with Fp showing the greatest utility in distinguishing them from coached and uncoached DID simulators. In the current study, we investigated the items on the MMPI-2 F, Fp, FB, Sc, and D scales that were most and least commonly endorsed by participants with DID in our 2014 study and compared these responses with those of coached and uncoached DID simulators. The comparisons revealed that patients with DID most frequently endorsed items related to dissociation, trauma, depression, fearfulness, conflict within family, and self-destructiveness. The coached group more successfully imitated item endorsements of the DID group than did the uncoached group. However, both simulating groups, especially the uncoached group, frequently endorsed items that were uncommonly endorsed by the DID group. The uncoached group endorsed items consistent with popular media portrayals of people with DID being violent, delusional, and unlawful. These results suggest that item endorsement patterns can provide useful information to clinicians making determinations about whether an individual is presenting with DID or feigning. © 2016 American Academy of Psychiatry and the Law.

The Effects of Goal Relevance and Perceptual Features on Emotional Items and Associative Memory

Directory of Open Access Journals (Sweden)

Wei B. Mao

2017-07-01

Full Text Available Showing an emotional item in a neutral background scene often leads to enhanced memory for the emotional item and impaired associative memory for background details. Meanwhile, both top–down goal relevance and bottom–up perceptual features played important roles in memory binding. We conducted two experiments and aimed to further examine the effects of goal relevance and perceptual features on emotional items and associative memory. By manipulating goal relevance (asking participants to categorize only each item image as living or non-living or to categorize each whole composite picture consisted of item image and background scene as natural scene or manufactured scene and perceptual features (controlling visual contrast and visual familiarity in two experiments, we found that both high goal relevance and salient perceptual features (high salience of items vs. high familiarity of items could promote emotional item memory, but they had different effects on associative memory for emotional items and neutral backgrounds. Specifically, high goal relevance and high perceptual-salience of items could jointly impair the associative memory for emotional items and neutral backgrounds, while the effect of item familiarity on associative memory for emotional items would be modulated by goal relevance. High familiarity of items could increase associative memory for negative items and neutral backgrounds only in the low goal relevance condition. These findings suggest the effect of emotion on associative memory is not only related to attentional capture elicited by emotion, but also can be affected by goal relevance and perceptual features of stimulus.

Policy for the treatment of insulting and sensitive lexical items in the ...

African Journals Online (AJOL)

Keywords: policy, treatment, insulting lexical items, sensitive lexical items, dictionary, woordeboek van die afrikaanse taal, simplexes, compounds, expressions, general usage criterion, labelling, synonyms, metalanguage, collocations, editorial usage examples, citations, advisors, racist lexical items, neutral lemmas, ...

Elu kui näitemäng / Helju Koger

Index Scriptorium Estoniae

Koger, Helju, 1943-

2007-01-01

VI kihelkonnapäevadest Juurus. Juuru Mihkli kirikus esines ansambel Resonabilis. Konverentsil räägiti Järlepa mõisast, Anu Allikvee pidas ettekande "August von Kotzebue elu nagu näitemäng" jm. Näitemängu "Pärmi Jaagu unenägu" nägi kohalike asjaarmastajate esituses

Item Construction and Psychometric Models Appropriate for Constructed Responses

Science.gov (United States)

1991-08-01

which involve only one attribute per item. This is especially true when we are dealing with constructed-response items, we have to measure much more...Service University of Ilinois Educacional Testing Service Rosedal Road Capign. IL 61801 Princeton. K3 08541 Princeton. N3 08541 Dr. Charles LeiS Dr

The Role of Item Feedback in Self-Adapted Testing.

Science.gov (United States)

Roos, Linda L.; And Others

1997-01-01

The importance of item feedback in self-adapted testing was studied by comparing feedback and no feedback conditions for computerized adaptive tests and self-adapted tests taken by 363 college students. Results indicate that item feedback is not necessary to realize score differences between self-adapted and computerized adaptive testing. (SLD)

Item Response Theory Modeling of the Philadelphia Naming Test

Science.gov (United States)

Fergadiotis, Gerasimos; Kellough, Stacey; Hula, William D.

2015-01-01

Purpose: In this study, we investigated the fit of the Philadelphia Naming Test (PNT; Roach, Schwartz, Martin, Grewal, & Brecher, 1996) to an item-response-theory measurement model, estimated the precision of the resulting scores and item parameters, and provided a theoretical rationale for the interpretation of PNT overall scores by relating…

Negative Affect Impairs Associative Memory but Not Item Memory

Science.gov (United States)

Bisby, James A.; Burgess, Neil

2014-01-01

The formation of associations between items and their context has been proposed to rely on mechanisms distinct from those supporting memory for a single item. Although emotional experiences can profoundly affect memory, our understanding of how it interacts with different aspects of memory remains unclear. We performed three experiments to examine…

Instrumental neutron activation analysis of 23 individual food articles from a high altitude region. Part 1. Determination of 14 essential minor and trace elements

International Nuclear Information System (INIS)

Waheed, S.; Zaidi, J.H.; Ahmad, S.; Saleem, M.

2002-01-01

Twenty-three individual food items commonly consumed in a high altitude region (Kashmir) have been investigated using instrumental neutron activation analysis. The concentration of Ca, Cl, Co, Cr, Cu, Fe, K, Mg, Mn, Mo, Na, Se, Sn, and Zn is reported for these food articles. For quality assurance of our data, IAEA and NIST standard reference materials have also been studied. The dietary intake of these elements was calculated in accordance with the weekly food selection habits of the residents of this area. The dietary contribution of most of these elements was found to be in agreement to the RDA/ESadi levels. The purpose was to design a database of essential elements for this area and to study the adequacy levels of these elements in different dietary items. Fairly adequate intake of Ca, Co, Cr, Cu, Fe, Mg, Mn, Mo, Se, Sn, and Zn through these foodstuffs is reported, whereas, lower intakes through these items were found for Cl, K, and Na. (author)

Matrix Sampling of Items in Large-Scale Assessments

Directory of Open Access Journals (Sweden)

Ruth A. Childs

2003-07-01

Full Text Available Matrix sampling of items -' that is, division of a set of items into different versions of a test form..-' is used by several large-scale testing programs. Like other test designs, matrixed designs have..both advantages and disadvantages. For example, testing time per student is less than if each..student received all the items, but the comparability of student scores may decrease. Also,..curriculum coverage is maintained, but reporting of scores becomes more complex. In this paper,..matrixed designs are compared with more traditional designs in nine categories of costs:..development costs, materials costs, administration costs, educational costs, scoring costs,..reliability costs, comparability costs, validity costs, and reporting costs. In choosing among test..designs, a testing program should examine the costs in light of its mandate(s, the content of the..tests, and the financial resources available, among other considerations.

Recommended core items to assess e-cigarette use in population-based surveys.

Science.gov (United States)

Pearson, Jennifer L; Hitchman, Sara C; Brose, Leonie S; Bauld, Linda; Glasser, Allison M; Villanti, Andrea C; McNeill, Ann; Abrams, David B; Cohen, Joanna E

2018-05-01

A consistent approach using standardised items to assess e-cigarette use in both youth and adult populations will aid cross-survey and cross-national comparisons of the effect of e-cigarette (and tobacco) policies and improve our understanding of the population health impact of e-cigarette use. Focusing on adult behaviour, we propose a set of e-cigarette use items, discuss their utility and potential adaptation, and highlight e-cigarette constructs that researchers should avoid without further item development. Reliable and valid items will strengthen the emerging science and inform knowledge synthesis for policy-making. Building on informal discussions at a series of international meetings of 65 experts from 15 countries, the authors provide recommendations for assessing e-cigarette use behaviour, relative perceived harm, device type, presence of nicotine, flavours and reasons for use. We recommend items assessing eight core constructs: e-cigarette ever use, frequency of use and former daily use; relative perceived harm; device type; primary flavour preference; presence of nicotine; and primary reason for use. These items should be standardised or minimally adapted for the policy context and target population. Researchers should be prepared to update items as e-cigarette device characteristics change. A minimum set of e-cigarette items is proposed to encourage consensus around items to allow for cross-survey and cross-jurisdictional comparisons of e-cigarette use behaviour. These proposed items are a starting point. We recognise room for continued improvement, and welcome input from e-cigarette users and scientific colleagues. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Qualitative Development and Content Validation of the PROMIS Pediatric Sleep Health Items.

Science.gov (United States)

Bevans, Katherine B; Meltzer, Lisa J; De La Motte, Anna; Kratchman, Amy; Viél, Dominique; Forrest, Christopher B

2018-04-25

To develop the Patient Reported Outcome Measurement Information System (PROMIS) Pediatric Sleep Health item pool and evaluate its content validity. Participants included 8 expert sleep clinician-researchers, 64 children ages 8-17 years, and 54 parents of children ages 5-17 years. We started with item concepts and expressions from the PROMIS Sleep Disturbance and Sleep Related Impairment adult measures. Additional pediatric sleep health concepts were generated by expert (n = 8), child (n = 28), and parent (n = 33) concept elicitation interviews and a systematic review of existing pediatric sleep health questionnaires. Content validity of the item pool was evaluated with item translatability review, readability analysis, and child (n = 36) and parent (n = 21) cognitive interviews. The final pediatric Sleep Health item pool includes 43 items that assess sleep disturbance (children's capacity to fall and stay asleep, sleep quality, dreams, and parasomnias) and sleep-related impairments (daytime sleepiness, low energy, difficulty waking up, and the impact of sleep and sleepiness on cognition, affect, behavior, and daily activities). Items are translatable and relevant and well understood by children ages 8-17 and parents of children ages 5-17. Rigorous qualitative procedures were used to develop and evaluate the content validity of the PROMIS Pediatric Sleep Health item pool. Once the item pool's psychometric properties are established, the scales will be useful for measuring children's subjective experiences of sleep.

Psychometric properties of the Triarchic Psychopathy Measure: An item response theory approach.

Science.gov (United States)

Shou, Yiyun; Sellbom, Martin; Xu, Jing

2018-05-01

There is cumulative evidence for the cross-cultural validity of the Triarchic Psychopathy Measure (TriPM; Patrick, 2010) among non-Western populations. Recent studies using correlational and regression analyses show promising construct validity of the TriPM in Chinese samples. However, little is known about the efficiency of items in TriPM in assessing the proposed latent traits. The current study evaluated the psychometric properties of the Chinese TriPM at the item level using item response theory analyses. It also examined the measurement invariance of the TriPM between the Chinese and the U.S. student samples by applying differential item functioning analyses under the item response theory framework. The results supported the unidimensional nature of the Disinhibition and Meanness scales. Both scales had a greater level of precision in the respective underlying constructs at the positive ends. The two scales, however, had several items that were weakly associated with their respective latent traits in the Chinese student sample. Boldness, on the other hand, was found to be multidimensional, and reflected a more normally distributed range of variation. The examination of measurement bias via differential item functioning analyses revealed that a number of items of the TriPM were not equivalent across the Chinese and the U.S. Some modification and adaptation of items might be considered for improving the precision of the TriPM for Chinese participants. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Quantitative Analysis of Complex Multiple-Choice Items in Science Technology and Society: Item Scaling

Directory of Open Access Journals (Sweden)

Ángel Vázquez Alonso

2005-05-01

Full Text Available The scarce attention to assessment and evaluation in science education research has been especially harmful for Science-Technology-Society (STS education, due to the dialectic, tentative, value-laden, and controversial nature of most STS topics. To overcome the methodological pitfalls of the STS assessment instruments used in the past, an empirically developed instrument (VOSTS, Views on Science-Technology-Society have been suggested. Some methodological proposals, namely the multiple response models and the computing of a global attitudinal index, were suggested to improve the item implementation. The final step of these methodological proposals requires the categorization of STS statements. This paper describes the process of categorization through a scaling procedure ruled by a panel of experts, acting as judges, according to the body of knowledge from history, epistemology, and sociology of science. The statement categorization allows for the sound foundation of STS items, which is useful in educational assessment and science education research, and may also increase teachers’ self-confidence in the development of the STS curriculum for science classrooms.

Developing an African youth psychosocial assessment: an application of item response theory.

Science.gov (United States)

Betancourt, Theresa S; Yang, Frances; Bolton, Paul; Normand, Sharon-Lise

2014-06-01

This study aimed to refine a dimensional scale for measuring psychosocial adjustment in African youth using item response theory (IRT). A 60-item scale derived from qualitative data was administered to 667 war-affected adolescents (55% female). Exploratory factor analysis (EFA) determined the dimensionality of items based on goodness-of-fit indices. Items with loadings less than 0.4 were dropped. Confirmatory factor analysis (CFA) was used to confirm the scale's dimensionality found under the EFA. Item discrimination and difficulty were estimated using a graded response model for each subscale using weighted least squares means and variances. Predictive validity was examined through correlations between IRT scores (θ) for each subscale and ratings of functional impairment. All models were assessed using goodness-of-fit and comparative fit indices. Fisher's Information curves examined item precision at different underlying ranges of each trait. Original scale items were optimized and reconfigured into an empirically-robust 41-item scale, the African Youth Psychosocial Assessment (AYPA). Refined subscales assess internalizing and externalizing problems, prosocial attitudes/behaviors and somatic complaints without medical cause. The AYPA is a refined dimensional assessment of emotional and behavioral problems in African youth with good psychometric properties. Validation studies in other cultures are recommended. Copyright © 2014 John Wiley & Sons, Ltd.

Nickel and cobalt release from jewellery and metal clothing items in Korea.

Science.gov (United States)

Cheong, Seung Hyun; Choi, You Won; Choi, Hae Young; Byun, Ji Yeon

2014-01-01

In Korea, the prevalence of nickel allergy has shown a sharply increasing trend. Cobalt contact allergy is often associated with concomitant reactions to nickel, and is more common in Korea than in western countries. The aim of the present study was to investigate the prevalence of items that release nickel and cobalt on the Korean market. A total of 471 items that included 193 branded jewellery, 202 non-branded jewellery and 76 metal clothing items were sampled and studied with a dimethylglyoxime (DMG) test and a cobalt spot test to detect nickel and cobalt release, respectively. Nickel release was detected in 47.8% of the tested items. The positive rates in the DMG test were 12.4% for the branded jewellery, 70.8% for the non-branded jewellery, and 76.3% for the metal clothing items. Cobalt release was found in 6.2% of items. Among the types of jewellery, belts and hair pins showed higher positive rates in both the DMG test and the cobalt spot test. Our study shows that the prevalence of items that release nickel or cobalt among jewellery and metal clothing items is high in Korea. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

An item response theory analysis of the Olweus Bullying scale.

Science.gov (United States)

Breivik, Kyrre; Olweus, Dan

2014-12-02

In the present article, we used IRT (graded response) modeling as a useful technology for a detailed and refined study of the psychometric properties of the various items of the Olweus Bullying scale and the scale itself. The sample consisted of a very large number of Norwegian 4th-10th grade students (n = 48 926). The IRT analyses revealed that the scale was essentially unidimensional and had excellent reliability in the upper ranges of the latent bullying tendency trait, as intended and desired. Gender DIF effects were identified with regard to girls' use of indirect bullying by social exclusion and boys' use of physical bullying by hitting and kicking but these effects were small and worked in opposite directions, having negligible effects at the scale level. Also scale scores adjusted for DIF effects differed very little from non-adjusted scores. In conclusion, the empirical data were well characterized by the chosen IRT model and the Olweus Bullying scale was considered well suited for the conduct of fair and reliable comparisons involving different gender-age groups. Information Aggr. Behav. 9999:XX-XX, 2014. © 2014 Wiley Periodicals, Inc. © 2014 Wiley Periodicals, Inc.

Detection of differential item functioning using Lagrange multiplier tests

NARCIS (Netherlands)

Glas, Cornelis A.W.

1996-01-01

In this paper it is shown that differential item functioning can be evaluated using the Lagrange multiplier test or C. R. Rao's efficient score test. The test is presented in the framework of a number of item response theory (IRT) models such as the Rasch model, the one-parameter logistic model, the

Semiparametric Item Response Functions in the Context of Guessing

Science.gov (United States)

Falk, Carl F.; Cai, Li

2016-01-01

We present a logistic function of a monotonic polynomial with a lower asymptote, allowing additional flexibility beyond the three-parameter logistic model. We develop a maximum marginal likelihood-based approach to estimate the item parameters. The new item response model is demonstrated on math assessment data from a state, and a computationally…

Items to be reflected to the nuclear power safety measures in Japan (concerning the examination, design and operation management) (excluding the items to be reflected to the standards)

International Nuclear Information System (INIS)

1980-01-01

In connection with the Three Mile Island nuclear power accident in March, 1979, in the United States, in order to introduce the lessons from it in the nuclear power safety regulations in Japan, 52 items to be reflected to the nuclear power safety measures were chosen by the Nuclear Safety Commission. Of these, 16 items were examined by the Committee on Examination of Reactor Safety. It was decided that these results would be introduced in the nuclear safety regulations, by the Nuclear Safety Commission. The following 16 items are described. For the examination, four items concerning the automatic operation of safety systems and others; for the design, five items concerning a small rupture accident, the monitoring of the state of primary coolant, control room layout and others; for the operation management, seven items concerning the inspection at the time of repair, the prevention of faulty handlings by operators and others. (J.P.N.)

Working memory for sequences of temporal durations reveals a volatile single-item store

Directory of Open Access Journals (Sweden)

Sanjay G Manohar

2016-10-01

Full Text Available When a sequence is held in working memory, different items are retained with differing fidelity. Here we ask whether a sequence of brief time intervals that must be remembered show recency effects, similar to those observed in verbal and visuospatial working memory. It has been suggested that prioritising some items over others can be accounted for by a focus of attention, maintaining some items in a privileged state. We therefore also investigated whether such benefits are vulnerable to disruption by attention or expectation. Participants listened to sequences of one to five tones, of varying durations (200ms to 2s. Subsequently, the length of one of the tones in the sequence had to be reproduced by holding a key. The discrepancy between the reproduced and actual durations quantified the fidelity of memory for auditory durations. Recall precision decreased with the number of items that had to be remembered, and was better for the first and last items of sequences, in line with set-size and serial position effects seen in other modalities. To test whether attentional filtering demands might impair performance, an irrelevant variation in pitch was introduced in some blocks of trials. In those blocks, memory precision was worse for sequences that consisted of only one item, i.e. the smallest memory set size. Thus, when irrelevant information was present, the benefit of having only one item in memory is attenuated. Finally we examined whether expectation could interfere with memory. On half the trials, the number of items in the upcoming sequence was cued. When the number of items was known in advance, performance was paradoxically worse when the sequence consisted of only one item. Thus the benefit of having only one item to remember is stronger when it is unexpectedly the only item. Our results suggest that similar mechanisms are used to hold auditory time durations in working memory, as for visual or verbal stimuli. Further, solitary items were

NHRIC (National Health Related Items Code)

Data.gov (United States)

U.S. Department of Health & Human Services — The National Health Related Items Code (NHRIC) is a system for identification and numbering of marketed device packages that is compatible with other numbering...

Measuring single constructs by single items: Constructing an even shorter version of the "Short Five" personality inventory.

Directory of Open Access Journals (Sweden)

Kenn Konstabel

Full Text Available The aim of this study was to construct a short, 30-item personality questionnaire that would be, in terms of content and meaning of the scores, as comparable as possible with longer, well-established inventories such as NEO PI-R and its clones. To do this, we shortened the formerly constructed 60-item "Short Five" (S5 by half so that each subscale would be represented by a single item. We compared all possibilities of selecting 30 items (preserving balanced keying within each domain of the five-factor model in terms of correlations with well-established scales, self-peer correlations, and clarity of meaning, and selected an optimal combination for each domain. The resulting shortened questionnaire, XS5, was compared to the original S5 using data from student samples in 6 different countries (Estonia, Finland, UK, Germany, Spain, and China, and a representative Finnish sample. The correlations between XS5 domain scales and their longer counterparts from well-established scales ranged from 0.74 to 0.84; the difference from the equivalent correlations for full version of S5 or from meta-analytic short-term dependability coefficients of NEO PI-R was not large. In terms of prediction of external criteria (emotional experience and self-reported behaviours, there were no important differences between XS5, S5, and the longer well-established scales. Controlling for acquiescence did not improve the prediction of criteria, self-peer correlations, or correlations with longer scales, but it did improve internal reliability and, in some analyses, comparability of the principal component structure. XS5 can be recommended as an economic measure of the five-factor model of personality at the level of domain scales; it has reasonable psychometric properties, fair correlations with longer well-established scales, and it can predict emotional experience and self-reported behaviours no worse than S5. When subscales are essential, we would still recommend using the

Understanding Mission Essential Competencies as a Work Analysis Method

Science.gov (United States)

2007-08-01

the beginnings of the popularity of competencies to Boyatzis. Brannick and Levine (2002), for example, suggest that it was the work of Prahalad and...job holders. This is intentional , both because it is deemed desirable to use the level of KS “chunking” that is common among warfighters since this...both reflected differences in complexity and character. A few of the missions they discussed included Basic Interdiction, Strategic Attack, and

Item response theory analyses of the Delis-Kaplan Executive Function System card sorting subtest.

Science.gov (United States)

Spencer, Mercedes; Cho, Sun-Joo; Cutting, Laurie E

2018-02-02

In the current study, we examined the dimensionality of the 16-item Card Sorting subtest of the Delis-Kaplan Executive Functioning System assessment in a sample of 264 native English-speaking children between the ages of 9 and 15 years. We also tested for measurement invariance for these items across age and gender groups using item response theory (IRT). Results of the exploratory factor analysis indicated that a two-factor model that distinguished between verbal and perceptual items provided the best fit to the data. Although the items demonstrated measurement invariance across age groups, measurement invariance was violated for gender groups, with two items demonstrating differential item functioning for males and females. Multigroup analysis using all 16 items indicated that the items were more effective for individuals whose IRT scale scores were relatively high. A single-group explanatory IRT model using 14 non-differential item functioning items showed that for perceptual ability, females scored higher than males and that scores increased with age for both males and females; for verbal ability, the observed increase in scores across age differed for males and females. The implications of these findings are discussed.

Remembered but unused: the accessory items in working memory that do not guide attention

NARCIS (Netherlands)

Peters, Judith C.; Goebel, Rainer; Roelfsema, Pieter R.

2009-01-01

If we search for an item, a representation of this item in our working memory guides attention to matching items in the visual scene. We can hold multiple items in working memory. Do all these items guide attention in parallel? We asked participants to detect a target object in a stream of objects

No evidence for an item limit in change detection.

Directory of Open Access Journals (Sweden)

Shaiyan Keshvari

Full Text Available Change detection is a classic paradigm that has been used for decades to argue that working memory can hold no more than a fixed number of items ("item-limit models". Recent findings force us to consider the alternative view that working memory is limited by the precision in stimulus encoding, with mean precision decreasing with increasing set size ("continuous-resource models". Most previous studies that used the change detection paradigm have ignored effects of limited encoding precision by using highly discriminable stimuli and only large changes. We conducted two change detection experiments (orientation and color in which change magnitudes were drawn from a wide range, including small changes. In a rigorous comparison of five models, we found no evidence of an item limit. Instead, human change detection performance was best explained by a continuous-resource model in which encoding precision is variable across items and trials even at a given set size. This model accounts for comparison errors in a principled, probabilistic manner. Our findings sharply challenge the theoretical basis for most neural studies of working memory capacity.

Missouri Assessment Program (MAP), Spring 2000: Secondary Science, Released Items, Grade 10.

Science.gov (United States)

Missouri State Dept. of Elementary and Secondary Education, Jefferson City.

This assessment sample provides information on the Missouri Assessment Program (MAP) for grade 10 science. The sample consists of six items taken from the test booklet and scoring guides for the six items. The items assess ecosystems, mechanics, and data analysis. (MM)

Development of the Oxford Participation and Activities Questionnaire: constructing an item pool

Directory of Open Access Journals (Sweden)

Kelly L

2015-05-01

Full Text Available Laura Kelly, Crispin Jenkinson, Sarah Dummett, Jill Dawson, Ray Fitzpatrick, David Morley Health Services Research Unit, Nuffield Department of Population Health, University of Oxford, Oxford, UK Purpose: The Oxford Participation and Activities Questionnaire is a patient-reported outcome measure in development that is grounded on the World Health Organization International Classification of Functioning, Disability, and Health (ICF. The study reported here aimed to inform and generate an item pool for the new measure, which is specifically designed for the assessment of participation and activity in patients experiencing a range of health conditions. Methods: Items were informed through in-depth interviews conducted with 37 participants spanning a range of conditions. Interviews aimed to identify how their condition impacted their ability to participate in meaningful activities. Conditions included arthritis, cancer, chronic back pain, diabetes, motor neuron disease, multiple sclerosis, Parkinson's disease, and spinal cord injury. Transcripts were analyzed using the framework method. Statements relating to ICF themes were recast as questionnaire items and shown for review to an expert panel. Cognitive debrief interviews (n=13 were used to assess items for face and content validity. Results: ICF themes relevant to activities and participation in everyday life were explored, and a total of 222 items formed the initial item pool. This item pool was refined by the research team and 28 generic items were mapped onto all nine chapters of the ICF construct, detailing activity and participation. Cognitive interviewing confirmed the questionnaire instructions, items, and response options were acceptable to participants. Conclusion: Using a clear conceptual basis to inform item generation, 28 items have been identified as suitable to undergo further psychometric testing. A large-scale postal survey will follow in order to refine the instrument further and

Identification of metallic items that caused nickel dermatitis in Danish patients.

Science.gov (United States)

Thyssen, Jacob P; Menné, Torkil; Johansen, Jeanne D

2010-09-01

Nickel allergy is prevalent as assessed by epidemiological studies. In an attempt to further identify and characterize sources that may result in nickel allergy and dermatitis, we analysed items identified by nickel-allergic dermatitis patients as causative of nickel dermatitis by using the dimethylglyoxime (DMG) test. Dermatitis patients with nickel allergy of current relevance were identified over a 2-year period in a tertiary referral patch test centre. When possible, their work tools and personal items were examined with the DMG test. Among 95 nickel-allergic dermatitis patients, 70 (73.7%) had metallic items investigated for nickel release. A total of 151 items were investigated, and 66 (43.7%) gave positive DMG test reactions. Objects were nearly all purchased or acquired after the introduction of the EU Nickel Directive. Only one object had been inherited, and only two objects had been purchased outside of Denmark. DMG testing is valuable as a screening test for nickel release and should be used to identify relevant exposures in nickel-allergic patients. Mainly consumer items, but also work tools used in an occupational setting, released nickel in dermatitis patients. This study confirmed 'risk items' from previous studies, including mobile phones.

In-Process Items on LCS.

Science.gov (United States)

Russell, Thyra K.

Morris Library at Southern Illinois University computerized its technical processes using the Library Computer System (LCS), which was implemented in the library to streamline order processing by: (1) providing up-to-date online files to track in-process items; (2) encouraging quick, efficient accessing of information; (3) reducing manual files;…

Three-item Direct Observation Screen (TIDOS) for autism spectrum disorder.

Science.gov (United States)

Oner, Pinar; Oner, Ozgur; Munir, Kerim

2014-08-01

We compared ratings on the Three-Item Direct Observation Screen test for autism spectrum disorders completed by pediatric residents with the Social Communication Questionnaire parent reports as an augmentative tool for improving autism spectrum disorder screening performance. We examined three groups of children (18-60 months) comparable in age (18-24 month, 24-36 month, 36-60 preschool subgroups) and gender distribution: n = 86 with Diagnostic and Statistical Manual of Mental Disorders (4th ed., text rev.) autism spectrum disorders; n = 76 with developmental delay without autism spectrum disorders; and n = 97 with typical development. The Three-Item Direct Observation Screen test included the following (a) Joint Attention, (b) Eye Contact, and (c) Responsiveness to Name. The parent Social Communication Questionnaire ratings had a sensitivity of .73 and specificity of .70 for diagnosis of autism spectrum disorders. The Three-Item Direct Observation Screen test item Joint Attention had a sensitivity of .82 and specificity of .90, Eye Contact had a sensitivity of .89 and specificity of .91, and Responsiveness to Name had a sensitivity of .67 and specificity of .87. In the Three-Item Direct Observation Screen test, having at least one of the three items positive had a sensitivity of .95 and specificity of .85. Age, diagnosis of autism spectrum disorder, and developmental level were important factors affecting sensitivity and specificity. The results indicate that augmentation of autism spectrum disorder screening by observational items completed by trained pediatric-oriented professionals can be a highly effective tool in improving screening performance. If supported by future population studies, the results suggest that primary care practitioners will be able to be trained to use this direct procedure to augment screening for autism spectrum disorders in the community. © The Author(s) 2013.

Quantum Partial Searching Algorithm of a Database with Several Target Items

International Nuclear Information System (INIS)

Pu-Cha, Zhong; Wan-Su, Bao; Yun, Wei

2009-01-01

Choi and Korepin [Quantum Information Processing 6(2007)243] presented a quantum partial search algorithm of a database with several target items which can find a target block quickly when each target block contains the same number of target items. Actually, the number of target items in each target block is arbitrary. Aiming at this case, we give a condition to guarantee performance of the partial search algorithm to be performed and the number of queries to oracle of the algorithm to be minimized. In addition, by further numerical computing we come to the conclusion that the more uniform the distribution of target items, the smaller the number of queries

Item-Based Top-N Recommendation Algorithms

National Research Council Canada - National Science Library

Deshpande, Mukund; Karypis, George

2003-01-01

... items that will be of interest to a certain user. User-based collaborative filtering is the most successful technology for building recommender systems to date, and is extensively used in many commercial recommender systems...

17 CFR 229.406 - (Item 406) Code of ethics.

Science.gov (United States)

2010-04-01

... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false (Item 406) Code of ethics. 229... 406) Code of ethics. (a) Disclose whether the registrant has adopted a code of ethics that applies to... code of ethics, explain why it has not done so. (b) For purposes of this Item 406, the term code of...

Reliability and norms for the 10-item self-motivation inventory: The TIGER Study

Science.gov (United States)

The Self-Motivation Inventory (SMI) has been shown to be a predictor of exercise dropout. The original SMI of 40 items has been shortened to 10 items and the psychometric qualities of the 10-item SMI are not known. To estimate the reliability of a 10-item SMI and develop norms for an ethnically dive...