Respiratory symptoms, sensitization, and exposure-response relationships in spray painters exposed to isocyanates

NARCIS (Netherlands)

Pronk, A.; Preller, L.; Raulf-Heimsoth, M.; Jonkers, I.C.L.; Lammers, J.-W.; Wouters, I.M.; Doekes, G.; Wisnewski, A.V.; Heederik, D.

2007-01-01

Rationale: Associations between oligomeric isocyanate exposure, sensitization, and respiratory disease have received little attention, despite the extensive use of isocyanate oligomers. Objectives: To investigate exposure-response relationships of respiratory symptoms and sensitization in a large

Inhalation exposure to isocyanates of car body repair shop workers and industrial spray painters

NARCIS (Netherlands)

Pronk, A.; Tielemans, E.; Skarping, G.; Bobeldijk, I.; Hemmen, J. van; Heederik, D.; Preller, L.

2006-01-01

As part of a large-scale epidemiological study, occupational isocyanate exposure was assessed in spray-painting environments. The aim was to assess which compounds contribute to isocyanate exposure in car body repair shops and industrial painting companies, and to identify tasks with high risk of

Transient receptor potential ankyrin 1 antagonists block the noxious effects of toxic industrial isocyanates and tear gases.

Science.gov (United States)

Bessac, Bret F; Sivula, Michael; von Hehn, Christian A; Caceres, Ana I; Escalera, Jasmine; Jordt, Sven-Eric

2009-04-01

The release of methyl isocyanate in Bhopal, India, caused the worst industrial accident in history. Exposures to industrial isocyanates induce lacrimation, pain, airway irritation, and edema. Similar responses are elicited by chemicals used as tear gases. Despite frequent exposures, the biological targets of isocyanates and tear gases in vivo have not been identified, precluding the development of effective countermeasures. We use Ca(2+) imaging and electrophysiology to show that the noxious effects of isocyanates and those of all major tear gas agents are caused by activation of Ca(2+) influx and membrane currents in mustard oil-sensitive sensory neurons. These responses are mediated by transient receptor potential ankyrin 1 (TRPA1), an ion channel serving as a detector for reactive chemicals. In mice, genetic ablation or pharmacological inhibition of TRPA1 dramatically reduces isocyanate- and tear gas-induced nocifensive behavior after both ocular and cutaneous exposures. We conclude that isocyanates and tear gas agents target the same neuronal receptor, TRPA1. Treatment with TRPA1 antagonists may prevent and alleviate chemical irritation of the eyes, skin, and airways and reduce the adverse health effects of exposures to a wide range of toxic noxious chemicals.

Inhalation exposure to isocyanates of car body repair shop workers and industrial spray painters.

Science.gov (United States)

Pronk, Anjoeka; Tielemans, Erik; Skarping, Gunnar; Bobeldijk, Ivana; VAN Hemmen, Joop; Heederik, Dick; Preller, Liesbeth

2006-01-01

As part of a large-scale epidemiological study, occupational isocyanate exposure was assessed in spray-painting environments. The aim was to assess which compounds contribute to isocyanate exposure in car body repair shops and industrial painting companies, and to identify tasks with high risk of isocyanate exposure. Mainly personal task-based samples (n = 566) were collected from 24 car body repair shops and five industrial painting companies using impingers with DBA in toluene. Samples were analysed by LC-MS for isocyanate monomers, oligomers and products of thermal degradation. From the 23 analysed compounds, 20 were detected. Exploratory factor analysis resulted in a HDI, TDI and MDI factor with the thermal degradation products divided over the TDI and MDI factors. The HDI factor mainly consisted of HDI oligomers and was dominant in frequency and exposure levels in both industries. Spray painting of PU lacquers resulted in the highest exposures for the HDI factor (car body repair shops than in industrial painting companies. Exposure levels were low (car body repair shops (isocyanate exposure in both industries with highest exposures during PU spraying. However, since respiratory protection is less extensively used during other tasks, lower level exposure during these other tasks may significantly contribute to the internal dose.

Developing an Efficient and General Strategy for Immobilization of Small Molecules onto Microarrays Using Isocyanate Chemistry.

Science.gov (United States)

Zhu, Chenggang; Zhu, Xiangdong; Landry, James P; Cui, Zhaomeng; Li, Quanfu; Dang, Yongjun; Mi, Lan; Zheng, Fengyun; Fei, Yiyan

2016-03-16

Small-molecule microarray (SMM) is an effective platform for identifying lead compounds from large collections of small molecules in drug discovery, and efficient immobilization of molecular compounds is a pre-requisite for the success of such a platform. On an isocyanate functionalized surface, we studied the dependence of immobilization efficiency on chemical residues on molecular compounds, terminal residues on isocyanate functionalized surface, lengths of spacer molecules, and post-printing treatment conditions, and we identified a set of optimized conditions that enable us to immobilize small molecules with significantly improved efficiencies, particularly for those molecules with carboxylic acid residues that are known to have low isocyanate reactivity. We fabricated microarrays of 3375 bioactive compounds on isocyanate functionalized glass slides under these optimized conditions and confirmed that immobilization percentage is over 73%.

Antimutagenic effect of isocyanates and related compounds in escherichia coli

International Nuclear Information System (INIS)

Kawazoe, Yutaka; Kato, Masanari

1982-01-01

Isocyanates and isothiocyanates have been suggested to inactivate enzymes involved in the metabolic activation of chemical carcinogens and the repair of DNA damage. These compounds decrease the mutability of a tester strain of Escherichia coli B under UV irradiation. This paper deals with the antimutagenicity of acylating agents, including isocyanates and isothiocyanates, and some anti-oxidants which are suspected to be anticarcinogenic. The results can be summarized as follows. (1) The antimutagenic effect observed in the present study operates on UV-induced mutagenesis but not on X-ray-induced mutagenesis. (2) This effect operates only on the wild-type strain, H/r30R, but not on Hs30R deficient in the excision repair system. (3) This effect may function through giving the irradiated cells a greater chance to carry out excision repair by prolonging the lag-period before entry into the S-phase. (4) The carbamoylating ability of isocyanates and isothiocyanates may be responsible for the antimutagenicity, but other type of reactivities may also be involved. These antimutagens also participate in inactivating enzymes relevant to the metabolic activation of mutagens, resulting in a decrease in the frequency of chemically induced mutagenesis. (author)

Isocyanate toughening of pCBT/organoclay nanocomposites with exfoliated structure and enhanced mechanical properties

Directory of Open Access Journals (Sweden)

T. Abt

2014-12-01

Full Text Available Cyclic butylene terephthalate (CBT® is an interesting matrix material for the preparation of nanocomposites due to its very low, water-like melt viscosity which favours clay exfoliation. Nevertheless, polymerized CBT (pCBT is inherently brittle. This paper reports the preparation of isocyanate-toughened nanocomposites made from CBT and organo-modified montmorillonite. The role of the organoclay as reinforcement and the polymeric isocyanate (PMDI as toughening agent on the properties of pCBT was studied. The organoclay increased the stiffness and strength by up to 20% whereas the PMDI improved the deformation behaviour. However, the PMDI did not affect the degree of clay dispersion or exfoliation and flocculated-intercalated structures were observed. The compatibility between the pCBT matrix and clay was further increased by preparing PMDI-tethered intercalated organoclay. The modified organoclay then exfoliated during ring-opening polymerization and yielded true pCBT/clay nanocomposites. This work demonstrates that reactive chain extension of CBT with a polyfunctional isocyanate is an effective method to obtain toughened pCBT nanocomposites. Moreover, isocyanates can enhance the compatibility between pCBT and nanofiller as well as the degree of exfoliation.

The addition of organotin hydrides to isocyanates and isothiocyanates: synthesis and structure of some organotin-substituted amides

NARCIS (Netherlands)

Noltes, J.G.; Janssen, M.J.

Organotin hydrides add across the carbon---nitrogen double bond of aryl isocyanates (tin---nitrogen bond formation) and hexyl isocyanate (tin---carbon bond formation) and across the carbon---sulfur double bond of phenyl isothiocyanate (tin---sulfur bond formation) to afford in excellent yield 1:1

Effect of reaction time and polyethylene glycol monooleate-isocyanate composition on the properties of polyurethane-polysiloxane modified epoxy

Science.gov (United States)

Triwulandari, Evi; Ramadhan, Mohammad Kemilau; Ghozali, Muhammad

2017-11-01

Polyurethane-polysiloxane modified epoxy based on polyethylene glycol monooleate (PSME-PEGMO) was synthesized. Polyethylene glycol monooleate (PEGMO) for the synthesis of PSME-GMO was synthesized via esterification between oleic acid and polyethylene glycol by using sodium hydroxide as catalyst. Synthesis of PSME-PEGMO was conducted by reacting epoxy, isocyanate, PEGMO, and polysiloxane (hydrolyzed and condensable 3-glycidyloxypropyltrimethoxysilane) simultaneously in one step. This synthesis was carried out by varied the reaction time (1, 2, 3 hours), PEGMO-isocyanate composition (PI composition: 10 and 20 % toward epoxy), and isocyanate/PEGMO ratio (NCO/OH ratio: 1.5 and 2.5). Characterization of PSME-PEGMO was conducted by determining the isocyanate conversion, viscosity analysis, mechanical properties (tensile strength and elongation at break) and thermal analysis using thermogravimetric analysis (TGA). The data show that the PI composition and NCO/OH ratio does not affect the isocyanate conversion linearly. The viscosity of PSME-PEGMO product at ratio and composition variation show has tended to increase with increasing of reaction time. The highest tensile strength and elongation at break PSME-PEGMO was shown by PI composition 20%, NCO/OH ratio 2.5 and reaction time 3 hours.

The 14C-labelling of 2-chloroethyl isocyanate. Application to the labelling of chloroethyl tetrazinone and chloroethylnitrosoureas

International Nuclear Information System (INIS)

Madelmont, J.C.; Moreau, M.F.; Godeneche, D.; Labarre, P.; Veyre, A.

1988-01-01

The labelling of 2-chloroethyl isocyanate with 14 C on the carbonyl group from 3-chloro [carboxyl- 14 C] propionic acid is described. The Curtius reaction under phase transfer condition was used. This isocyanate was used to synthesize 2-chloroethyl tetrazinone and 2-chloro-ethyl nitrosourea. (author)

Isocyanate test antigens

International Nuclear Information System (INIS)

Karol, M.H.; Alarie, Y.C.

1980-01-01

A test antigen for detecting antibodies to a diisocyanate comprises the reaction product of a protein and a monoisocyanate derived from the same radical as the diisocyanate. The diisocyanates most usually encountered and therefore calling for antibody detection are those of toluene, hexamethylene, methylene, isophorone and naphthylene. The preferred protein is human serum albumin. (author)

Isocyanate exposure and respiratory symptoms in Dutch car spray painters

NARCIS (Netherlands)

Heederik, D.; Pronk, A.; Doekes, G.; Bobbeldijk, I.; Preller, L.

2005-01-01

Isocyanate allergy and asthma is an important respiratory disease in most industrialized countries. Little information about its importance is available for the Netherlands. A baseline survey, part of a larger longitudinal epidemiological survey, shows that exposure to mainly HDI monomers and

Quantification of isocyanates and amines in polyurethane foams and coated products by liquid chromatography–tandem mass spectrometry

Science.gov (United States)

Mutsuga, Motoh; Yamaguchi, Miku; Kawamura, Yoko

2014-01-01

An analytical method for the identification and quantification of 10 different isocyanates and 11 different amines in polyurethane (PUR) foam and PUR-coated products was developed and optimized. Isocyanates were extracted and derivatized with di-n-butylamine, while amines were extracted with methanol. Quantification was subsequently performed by liquid chromatography–tandem mass spectrometry. Using this methodology, residual levels of isocyanates and amines in commercial PUR products were quantified. Although the recoveries of certain isocyanates and amines were low, the main compounds used as monomers in the production of PUR products, and their decomposition species, were clearly identified at quantifiable levels. 2,4-and 2,6-toluenediisocyanate were detected in most PUR foam samples and a pastry bag in the range of 0.02–0.92 mg/kg, with their decomposition compounds, 2,4-and 2,6-toluenediamine, detected in all PUR foam samples in the range of 9.5–59 mg/kg. PUR-coated gloves are manufactured using 4,4′-methylenebisphenyl diisocyanate as the main raw material, and a large amount of this compound, in addition to 4,4′-methylenedianiline and dicyclohexylmethane-4,4′-diamine were found in these samples. PMID:24804074

Aryliminopropadienone-C-Amidoketenimine- Amidinoketene-2-Aminoquinolone Cascades and the Ynamine-Isocyanate Reaction.

Science.gov (United States)

Wentrup, Curt; Rao, V. V. Ramana; Frank, Wilhelm; Fulloon, Belinda E.; Moloney, Daniel W. J.; Mosandl, Thomas

1999-05-14

Imidoylketenes 11 and oxoketenimines 12 are generated by flash vacuum thermolysis of Meldrum's acid derivatives 9, pyrrolediones 17 and 18, and triazole 19 and are observed by IR spectroscopy. Ketenimine-3-carboxylic acid esters 12a are isolable at room temperature. Ketenes 11 and ketenimines 12 undergo rapid interconversion in the gas phase, and the ketenes cyclize to 4-quinolones 13. When using an amine leaving group in Meldrum's acid derivatives 9c, the major reaction products are aryliminopropadienones, ArN=C=C=C=O (15). The latter react with 1 equiv of nucleophile to produce ketenimines 12 and with 2 equiv to afford malonic acid imide derivatives 16. N-Arylketenimine-C-carboxamides 12c cyclize to quinolones 13c via the transient amidinoketenes 11c at temperatures of 25-40 degrees C. This implies rapid interconversion of ketenes and ketenimines by a 1,3-shift of the dimethylamino group, even at room temperature. This interconversion explains previously poorly understood outcomes of the ynamine-isocyanate reaction. The solvent dependence of the tautomerism of 4-quinolones/4-quinolinols is discussed. Rotational barriers of NMe(2) groups in amidoketenimines 12c and malonioc amides and amidines 16 (24) are reported.

A study on the grafting reaction of isocyanates with hydroxyapatite particles

NARCIS (Netherlands)

Liu, Q.; de Wijn, J.R.; van Blitterswijk, Clemens

1998-01-01

The surface grafting reactions of a series of isocyanates with hydroxyapatite particles at different temperatures were studied by Infrared spectrophotometry (IR) and thermal gravimetric analysis (TGA). The study results show that both hexamethylene diisocyanate (HMDI) and isocyanatoethyl

Isocyanates and human health: Multi-stakeholder information needs and research priorities

Science.gov (United States)

Lockey, JE; Redlich, CA; Streicher, R; Pfahles-Hutchens, A; Hakkinen, PJ; Ellison, GL; Harber, P; Utell, M; Holland, J; Comai, A; White, Marc

2014-01-01

Objective Outline the knowledge gaps and research priorities identified by a broad-base of stakeholders involved in the planning and participation of an international conference and research agenda workshop on isocyanates and human health held in Potomac, Maryland in April 2013. Methods A multi-modal iterative approach was employed for data collection including pre-conference surveys, review of a 2001 consensus conference on isocyanates, oral and poster presentations, focused break-out sessions, panel discussions and post-conference research agenda workshop. Results Participants included representatives of consumer and worker health, health professionals, regulatory agencies, academic and industry scientists, labor, and trade associations. Conclusions Recommendations were summarized regarding knowledge gaps and research priorities in the following areas: worker and consumer exposures; toxicology, animal models, and biomarkers; human cancer risk; environmental exposure and monitoring; and respiratory epidemiology and disease, and occupational health surveillance. PMID:25563538

Isocyanate exposure and asthma in the UK vehicle repair industry.

Science.gov (United States)

Stocks, S J; Jones, K; Piney, M; Agius, R M

2015-12-01

Organic diisocyanates are a common cause of occupational asthma, particularly in motor vehicle repair (MVR) workers. The UK Health & Safety Laboratory provides screening for urinary hexamethylenediamine (UHDA), a biomarker of exposure to 1,6-hexamethylene diisocyanate (HDI). The UK Surveillance of Work-related and Occupational Respiratory Disease scheme (SWORD) has collected reports of occupational asthma since 1996. To compare trends in HDI exposure with trends in the incidence of work-related asthma attributed to isocyanates or paint spraying in MVR workers reported to SWORD. Two-level regression models were used to estimate trends in UHDA levels and work-related asthma in MVR workers reported to SWORD. The direction and magnitude of the trends were compared descriptively. From 2006 to 2014, there was a significant decline in the number of urine samples with detectable levels of UHDA (odds ratio = 0.96; 95% confidence intervals 0.94-0.98) and minimal change in those over the guidance value (1.03; 1.00-1.06). Over the same period, there was a significant decline in all asthma cases attributed to isocyanates or paint spraying reported to SWORD (0.90; 0.86-0.94) and a non-significant decline among MVR workers (0.94; 0.86-1.02). The simultaneous decrease in HDI exposure and incident cases of asthma reported to SWORD is temporally consistent with a reduction in exposure to airborne isocyanate leading to a reduction in asthma. Although this is not direct evidence of a causal relationship between the two trends, it is suggestive. © The Author 2015. Published by Oxford University Press on behalf of the Society of Occupational Medicine.

Environmental Isocyanate-Induced Asthma: Morphologic and Pathogenetic Aspects of an Increasing Occupational Disease

Directory of Open Access Journals (Sweden)

Joachim Schirren

2011-09-01

Full Text Available Occupational diseases affect more and more people every year. According to the International Labour Organization (ILO, in 2000 an estimated amount of at least 160 million people became ill as a result of occupational-related hazards or injuries. Globally, occupational deaths, diseases and injuries account for an estimated loss of 4% of the Gross Domestic Product. Important substances that are related to occupational diseases are isocyanates and their products. These substances, which are used in a lot of different industrial processes, are not only toxic and irritant, but also allergenic. Although the exposure to higher concentrations could be monitored and restricted by technical means, very low concentrations are difficult to monitor and may, over time, lead to allergic reactions in some workers, ending in an occupational disease. In order to prevent the people from sickening, the mechanisms underlying the disease, by patho-physiological and genetical means, have to be known and understood so that high risk groups and early signs in the development of an allergic reaction could be detected before the exposure to isocyanates leads to an occupational disease. Therefore, this paper reviews the so far known facts concerning the patho-physiologic appearance and mechanisms of isocyanate-associated toxic reactions and possible genetic involvement that might trigger the allergic reactions.

Linear uranium complexes X2UL5 with L=cyanide, iso-cyanate: DFT evidence for similarities between uranyl (X = O) and uranocene (X = Cp) derivatives

International Nuclear Information System (INIS)

Iche-Tarrat, N.; Marsden, Colin J.; Barros, N.; Maron, L.; Barros, N.

2008-01-01

A DFT study of the isostructural compounds [UO 2 L 5 ] n- with n=3-5 and linear [Cp 2 UL 5 ] m- with m=1-3 has been carried out for two different anionic ligands. Structurally stable structures are obtained for all systems. The coordination competition between cyanide (CN - ) and isocyanide (NC - ) as well as between cyanate (OCN - ) and iso-cyanate (NCO - ) has been studied in the uranyl case. A clear preference for cyanide and iso-cyanate complexes is reported. The coordination of five ligands in the equatorial plane is rationalized by the analysis of the MO diagram of both systems. Moreover, the qualitative comparison of the two MO diagrams shows a high similarity in agreement with the isolobality concept. The existence of linear [Cp 2 UL 5 ] - organometallic U(VI) complexes is thus proposed, as well as the possibility of obtaining complexes of both types for U(VI) and U(V) with OCN - ligands. In addition, the U(IV) linear metallocene is calculated to be stable for the latter ligand. (authors)

Performance of composite boards from long strand oil palm trunk bonded by isocyanate and urea formaldehyde adhesives

Science.gov (United States)

Hermanto, Indra; Massijaya, M. Y.

2018-03-01

In this research, the obtained long strand were produced from the outer part of oil palm trunk and then hot-prepressed. The three-ply composite boards were made from hot-prepressed long strand and use bonded by isocyanate and urea formaldehyde adhesives with a glue spread variation of 150 g/m2, 225 g/m2, and 300 g/m2. The board target density was 0.65 g/cm3, face and back layers orientation is the same and the core layer was perpendicular to the face and back layers. The research results showed that : (1) composite boards bonded by isocyanate performed better physical and mechanical properties compared to those of bonded by urea formaldehyde, (2) utilization of higher glue spread level would improve the physical and mechanical properties of the composite board. (3) composite boards bonded by isocyanate and urea formaldehyde adhesives at glue spread of 225 g/m2, 300 g/m2, respectively were enough to fulfill the JIS A 5908 (2003) standard.

Highly efficient isocyanate-free microwave-assisted synthesis of [6]-oligourea

KAUST Repository

Qaroush, Abdussalam K.

2013-01-01

A new eco-friendly, isocyanate-free, energy-saving method for the production of [6]-oligourea, utilizing a green carbonylating agent, viz. propylene carbonate, is reported. It comprises an organocatalyzed, microwave-assisted, solvent-free synthesis. Two modes of microwave-assisted synthesis, viz. dynamic and fixed energy modes, were applied. Upon optimization, the dynamic mode gave 79% yields of [6]-oligourea. On the other hand, almost quantitative yields were obtained using the fixed mode, within 20 min, at 10 W and with the same catalyst loading. Combination of both organocatalysis and microwave energy input appears to be a key issue for the efficiency of the reaction, with the fixed energy mode being best suited. It should be noted that all data reported are reproducible (due to the homogeneous microwave technology used by CEM Discover S-Class of microwave reactors). To the best of our knowledge, this is the best eco-friendly synthetic approach for the preparation of the title oligomers. It paves the way for using more of the biorenewable and sustainable chemicals as a feedstock for the production of polyureas. The oligomer produced was analyzed by EA, ATR-FTIR, XRD, 1H and 13CNMR. Furthermore, thermal properties of the resulting [6]-oligourea were analyzed using TGA and DSC. © The Royal Society of Chemistry 2013.

Rh(III-catalyzed directed C–H bond amidation of ferrocenes with isocyanates

Directory of Open Access Journals (Sweden)

Satoshi Takebayashi

2012-10-01

Full Text Available [RhCp*(OAc2(H2O] [Cp* = pentamethylcyclopentadienyl] catalyzed the C–H bond amidation of ferrocenes possessing directing groups with isocyanates in the presence of 2 equiv/Rh of HBF4·OEt2. A variety of disubstituted ferrocenes were prepared in high yields, or excellent diastereoselectivities.

Radiation cross-linking of ethylene vinyl alcohol copolymer functionalized with m-isopropenyl-α,α-dimethyl benzyl isocyanate

International Nuclear Information System (INIS)

Ekman, K.B.; Naesman, J.H.

1993-01-01

An ethylene vinyl alcohol copolymer was functionalized with m-isopropenyl-α,α-dimethyl benzyl isocyanate using reactive processing in a mixer. The functionalization introduces pendant unsaturation to the polymer, which allows radiation cross-linked to gel contents >70% at radiation doses below 100 kGy. Unfunctionalized ethylene vinyl alcohol copolymer, on the other hand, forms no gel upon irradiation. The functionalization was completed within a few minutes of reactive mixing, which was confirmed with both FTIR and 13 C-NMR measurements. The oxygen permeability of ethylene vinyl alcohol copolymer increased with increasing degree of functionalization, and irradiation of the samples formed trapped radicals, which act as oxygen scavengers. Consequently no oxygen permeability was detected. However, radical activity was inhibited by annealing the samples at 110 C resulting in a 24% higher oxygen permeability value for the irradiated unfunctionalized copolymer. The oxygen permeability values of the irradiated functionalized samples were approximately 13% lower. Laminates of m-isopropenyl-α,α-dimethyl benzyl isocyanate functionalized ethylene vinyl alcohol copolymer and m-isopropenyl-α,α-dimethyl benzyl isocyanate functionalized ethylene hydroxyethyl methacrylate copolymer acquired improved adhesive strength both at dry and wet conditions as well as at elevated temperature upon exposure to radiation

Determination of isocyanate specific albumin-adducts in workers exposed to toluene diisocyanates.

Science.gov (United States)

Sabbioni, Gabriele; Gu, Qi; Vanimireddy, Lakshiminiranjan Reddy

2012-03-01

Toluene diisocyanates (2,4-TDI and 2,6-TDI) are important intermediates in the chemical industry. Among the main damages after low levels of TDI exposure are lung sensitization and asthma. It is therefore necessary to have sensitive and specific methods to monitor isocyanate exposure of workers. Urinary metabolites or protein adducts have been used as biomarkers in workers exposed to TDI. However, with these methods it was not possible to determine if the biomarkers result from exposure to TDI or to the corresponding toluene diamines (TDA). This work presents a new procedure for the determination of isocyanate-specific albumin adducts. Isotope dilution mass spectrometry was used to measure the adducts in albumin present in workers exposed to TDI. 2,4-TDI and 2,6-TDI formed adducts with lysine: N(ϵ)-[({3-amino-4-methylphenyl}amino)carbonyl]-lysine, N(ϵ)-[({5-amino-2-methylphenyl}amino)carbonyl]-lysine, and N(ϵ)- [({3-amino-2-methylphenyl}amino)carbonyl]-lysine. In future studies, this new method can be applied to measure TDI-exposures in workers.

Homochiral Acyl Isocyanates as Diagnostic NMR Probes for the Enantiomeric Purity of Chiral Alcohols

Directory of Open Access Journals (Sweden)

Gregory H. P. Roos

2000-12-01

Full Text Available The first reported acyl and sulfonylisocyanates were developed and tested in reactions with chiral alcohols to afford diastereomeric carbamates. NMR analysis of these investigates the chemical shift discrimination that would allow these activated isocyanates to be used as diagnostic probes of enantiomeric purity.

Isocyanates useful for forming synthetic antigens receptive to radiolabelling

International Nuclear Information System (INIS)

Eisenhardt, W.A. Jr.; Hedaya, E.; Theodoropulos, S.

1981-01-01

This patent claim on behalf of Union Carbide Corporation, relates to synthesizing isocyantes useful for forming synthetic antigens receptive to radio labelling. The claim is for an isocyanate having the structural formula (R) 3 SiO-R' -N=C=O, wherein each R is independently selected from alkyl, alicyclic, aryl, alkaryl and aralkyl groups, each having no more than 10 carbon atoms and being optionally substituted by one or more halogen atoms, and R' is selected from -C 6 H 4 -CH 2 -CH 2 - and -C 6 H 4 -CH 2 -CH-COOCH 3 . (U.K.)

Exhaled nitric oxide in spray painters exposed to isocyanates : Effect modification by atopy and smoking

NARCIS (Netherlands)

Jonaid, Badri Sadat; Pronk, Anjoeka; Doekes, Gert; Heederik, Dick

2014-01-01

Background: Isocyanate asthma is one of the most frequently identified forms of occupational asthma in industrialised countries. The underlying mechanisms have not been clarified. There is only limited information about the relationship between exhaled nitric oxide (eNO) and occupational exposure to

Exhaled nitric oxide in spray painters exposed to isocyanates: Effect modification by atopy and smoking

NARCIS (Netherlands)

Jonaid, B.S.; Pronk, A.; Doekes, G.; Heederik, D.

2014-01-01

Background: Isocyanate asthma is one of the most frequently identified forms of occupational asthma in industrialised countries. The underlying mechanisms have not been clarified. There is only limited information about the relationship between exhaled nitric oxide (eNO) and occupational exposure to

Palladium-catalyzed cyclocarbonylation of o-iodoanilines with heterocumulenes: regioselective preparation of 4(3H)-quinazolinone derivatives

Science.gov (United States)

Larksarp; Alper

2000-05-09

A catalyst system comprising palladium acetate-bidentate phosphine is effective for the cyclocarbonylation of o-iodoanilines with heterocumulenes at 70-100 degrees C for 12-24 h to give the corresponding 4(3H)-quinazolinone derivatives in good yields. Utilizing o-iodoaniline with isocyanates, carbodiimides, and ketenimines for the reaction, 2,4-(1H,3H)-quinazolinediones, 2-amino-4(3H)-quinazolinones and 2-alkyl-4(3H)-quinazolinones were obtained, respectively. The nature of the substrates including the electrophilicity of the carbon center of the carbodiimide, and the stability of the ketenimine, influence the product yields of this reaction. Urea-type intermediates are believed to be generated first in situ from the reaction of o-iodoanilines with heterocumulenes, followed by palladium-catalyzed carbonylation and cyclization to yield the products.

Effects of humidity and filter material on diffusive sampling of isocyanates using reagent-coated filters

NARCIS (Netherlands)

Henneken, H.; Vogel, M.; Karst, U.

2006-01-01

Diffusive sampling of methyl isocyanate (MIC) on 4-nitro-7-piperazinobenzo-2-oxa-1,3-diazole (NBDPZ)-coated glass fibre (GF) filters is strongly affected by high relative humidity (RH) conditions. It is shown that the humidity interference is a physical phenomenon, based on displacement of reagent

Laboratory study of isocyanic acid ions: Rotational spectroscopy of NCO{sup −}, H{sub 2}NCO{sup +}, and HNCOH{sup +}

Energy Technology Data Exchange (ETDEWEB)

Lattanzi, Valerio; Gottlieb, Carl A.; Thaddeus, Patrick; McCarthy, Michael C. [Harvard-Smithsonian Center for Astrophysics, and School of Engineering and Applied Sciences, Harvard University (United States); Thorwirth, Sven [I. Physikalisches Institut Universität zu Köln, and Max-Planck-Institut für Radioastronomie (Germany)

2015-01-22

We report detection of protonated isocyanic acid in two isomeric forms, H{sub 2}NCO{sup +} and HNCOH{sup +}, by high-resolution spectroscopy. The two ions were first observed at centimeter wavelengths by Fourier Transform (FT) microwave spectroscopy, in a discharge through HNCO heavily diluted in hydrogen in the throat of a supersonic nozzle. Spectroscopic constants derived from the two lowest rotational transitions of both isomers agree very well with those derived from theoretical structures computed at the coupled cluster level of theory. In the same molecular beam, the fundamental rotational transition of NCO{sup −} was observed with well-resolved nitrogen quadrupole hyperfine structure. Detection of NCO{sup −} and H{sub 2}NCO{sup +} in our beam was subsequently confirmed by observation of several millimeter-wave transitions in a low pressure discharge through cyanogen and water. The spectroscopic constants of NCO{sup −} obtained earlier by infrared laser spectroscopy are in good agreement with the highly accurate constants derived here. Owing to the high abundance of HNCO in many galactic molecular sources, both ions are excellent candidates for astronomical detection in the radio band.

Investigation of non-isocyanate urethane functional latexes and carbon nanofiller/epoxy coatings

Science.gov (United States)

Meng, Lei

This dissertation consists of two parts. In the first part, a new class of non-isocyanate urethane methacrylates was synthesized and the effect of the new monomers on the urethane functional latex was investigated. The second part focused on a comparison of carbon nanofillers in inorganic/organic epoxy coating system for anticorrosive applications. A new class of non-isocyanate urethane methacrylates (UMAs) monomers was synthesized through an environmentally friendly non-isocyanate pathway. The kinetics of seeded semibatch emulsion polymerization of UMAs with methyl methacrylate (MMA) and butyl acrylate (BA) was monitored. The particle size and morphology were investigated by dynamic light scattering (DLS), ultrasound acoustic attenuation spectroscopy (UAAS) and transmission electron microscopy (TEM). The minimum film formation temperature (MFFT), mechanical and viscoelastic properties were studied. It was found that the emulsion polymerization processes all proceeded via Smith-Ewart control, leading to the uniform morphology and particle size. The glass transition temperature (Tg) and the mechanical properties of poly(MMA/BA/UMA) decreased with the increasing chain length of urethane methacrylate monomers due to the increasing flexibility of side chains. Without the effect of Tg, lower MFFT and improved mechanical properties were observed from urethane functional latexes. The improved mechanical properties were due to the increasing particle interaction by forming hydrogen bonding. Furthermore, the effect of urethane functionality in terms of the polymer composition, the location and the concentration was investigated by the batch, single-stage and two-stage semibatch polymerization of 2-[(butylcarbamoyl)oxy]ethyl methacrylate (BEM) with MMA and BA. The core-shell and homogeneous structures were evaluated by TEM, differential scanning calorimetry (DSC), and solid state nuclear magnetic resonance (SS-NMR). The compositional drift was observed from the batch

Size selective isocyanate aerosols personal air sampling using porous plastic foams

International Nuclear Information System (INIS)

Cong Khanh Huynh; Trinh Vu Duc

2009-01-01

As part of a European project (SMT4-CT96-2137), various European institutions specialized in occupational hygiene (BGIA, HSL, IOM, INRS, IST, Ambiente e Lavoro) have established a program of scientific collaboration to develop one or more prototypes of European personal samplers for the collection of simultaneous three dust fractions: inhalable, thoracic and respirable. These samplers based on existing sampling heads (IOM, GSP and cassettes) use Polyurethane Plastic Foam (PUF) according to their porosity to support sampling and separator size of the particles. In this study, the authors present an original application of size selective personal air sampling using chemical impregnated PUF to perform isocyanate aerosols capturing and derivatizing in industrial spray-painting shops.

Real-time emission factor measurements of isocyanic acid from light duty gasoline vehicles.

Science.gov (United States)

Brady, James M; Crisp, Timia A; Collier, Sonya; Kuwayama, Toshihiro; Forestieri, Sara D; Perraud, Véronique; Zhang, Qi; Kleeman, Michael J; Cappa, Christopher D; Bertram, Timothy H

2014-10-07

Exposure to gas-phase isocyanic acid (HNCO) has been previously shown to be associated with the development of atherosclerosis, cataracts and rheumatoid arthritis. As such, accurate emission inventories for HNCO are critical for modeling the spatial and temporal distribution of HNCO on a regional and global scale. To date, HNCO emission rates from light duty gasoline vehicles, operated under driving conditions, have not been determined. Here, we present the first measurements of real-time emission factors of isocyanic acid from a fleet of eight light duty gasoline-powered vehicles (LDGVs) tested on a chassis dynamometer using the Unified Driving Cycle (UC) at the California Air Resources Board (CARB) Haagen-Smit test facility, all of which were equipped with three-way catalytic converters. HNCO emissions were observed from all vehicles, in contrast to the idealized laboratory measurements. We report the tested fleet averaged HNCO emission factors, which depend strongly on the phase of the drive cycle; ranging from 0.46 ± 0.13 mg kg fuel(-1) during engine start to 1.70 ± 1.77 mg kg fuel(-1) during hard acceleration after the engine and catalytic converter were warm. The tested eight-car fleet average fuel based HNCO emission factor was 0.91 ± 0.58 mg kg fuel(-1), within the range previously estimated for light duty diesel-powered vehicles (0.21-3.96 mg kg fuel(-1)). Our results suggest that HNCO emissions from LDGVs represent a significant emission source in urban areas that should be accounted for in global and regional models.

Synthesis of New Imidazolidin-2,4-dione and 2-Thioxoimidazolidin-4-ones via C-Phenylglycine Derivatives

Directory of Open Access Journals (Sweden)

José Alixandre de Sousa Luis

2009-12-01

Full Text Available Hydantoins and their derivatives constitute a group of pharmaceutical compounds with anticonvulsant and antiarrhythmic properties, and are also used against diabetes. N-3 and C-5 substituted imidazolidines are examples of such products. As such, we have developed a synthesis of 2,4-dione and 2-thioxo-4-one imidazolidinic derivatives by reaction of amino acids with C-phenylglycine, phenyl isocyanate and phenyl isothiocyanate. Four amino-derivatives IG(1-4 and eight imidazolidinic derivatives, IM(1-8, were obtained in yields of 70–74%. The mass, infrared, 1H and 13C-NMR spectra of representative products are discussed.

Respiratory protection from isocyanate exposure in the autobody repair and refinishing industry.

Science.gov (United States)

Liu, Youcheng; Stowe, Meredith H; Bello, Dhimiter; Woskie, Susan R; Sparer, Judy; Gore, Rebecca; Youngs, Fred; Cullen, Mark R; Redlich, Carrie A

2006-05-01

This study, part of the Survey of Painters and Repairers of Auto bodies by Yale (SPRAY), evaluated the effectiveness of respiratory protection against exposure to aliphatic polyisocyanates. A total of 36 shops were assessed for respiratory protection program completeness; 142 workers were measured for respirator fit factor (FF) using PortaCount Plus respirator fit tester. Twenty-two painters from 21 shops were sampled using NIOSH method 5525 to determine the workplace protection factor (WPF) of negative pressure, air-purifying half-facepiece respirators equipped with organic vapor cartridges and paint prefilters during spray-painting and priming activities. Only 11 shops (30%) had written respiratory protection programs. Eighty percent of all fit tested workers passed the test on the first try with FF >or= 100, and 92% passed the second test after respirator use training. Overall geometric mean (GM) FF was 1012 for all fit tested workers. Significant differences on pass rate (92% vs. 72%) and on FF (1990 vs. 736) were found between previously fit tested workers vs. nontested workers. Twenty-nine WPF samples were collected. The outside facepiece GM concentration of total isocyanate group (NCO) was 378.4 micro g NCO/m(3) with 96% concentrations exceeding the U.K. short-term exposure limit, 70 micro g NCO/m(3), but no in-facepiece concentrations exceeded the limit. The GM WPF of total NCO was 319 (GSD 4) and the 5th percentile was 54. WPF of total NCO was positively correlated with the duration of painting task. FF positively correlated with WPF when FF was 450. We conclude that negative pressure, air-purifying half-facepiece respirators equipped with organic vapor cartridges and paint prefilters provide effective protection against isocyanate exposure in spray and priming operations if workers are properly trained and fitted.

Influence of the prepolymer molecular weight and free isocyanate content on the rheology of polyurethane modified bitumens

OpenAIRE

Carrera Páez, Virginia; Cuadri Vega, Antonio Abad; García Morales, Moisés; Partal López, Pedro

2014-01-01

Isocyanate-based modification is lately gaining acceptance as a successful way to give added value to bitumen, a crude oil refining by-product. In order to study the influence of prepolymer type on the rheological properties of the resulting binders, six prepolymers synthesized from polypropylene-glycols (PPG) with varying molecular weight (between 440 and 2425) and different molar excess of a polymeric MDI (4,4’-diphenylmethane diisocyanate) were used. Two modification procedures, either inv...

Synthetic antigens, radiolabelled derivatives thereof, and methods of analysis using such derivatives

International Nuclear Information System (INIS)

Eisenhardt, W.A. Jr.; Hedaya, E.; Theodoropulos, S.

1981-01-01

This patent claim on behalf of Union Carbide Corporation, relates to a method of carrying out a competitive binding radioassay of a compound of interest in a clinical sample, using isocyanates labelled with radioiodine as synthetic antigens. (U.K.)

Tin oxide surfaces--8. An infrared study of the mechanism of formation of a surface isocyanate species on SnO/sub 2//0. 55 CuO during catalysis of the oxidation of carbon monoxide by nitric oxide

Energy Technology Data Exchange (ETDEWEB)

Harrison, P.G.; Thornton, E.W.

1978-01-01

In studies carried out at 470/sup 0/K, the measurements of the isotopic shifts of the 2189/cm pseudo-antisymmetric stretching vibration for carbon-13, nitrogen-15, and oxygen-18 substitution indicated that the oxygen atom of the surface isocyanate, formed as an intermediate in the reaction of CO with NO, originated from NO, not from CO as previously believed. The mechanism proposed involves the dissociative chemisorption of CO, the formation of a fulminate by the reaction of NO with the surface carbon atom, and rapid isomerization to the isocyanate.

Selective activation of human heat shock gene transcription by nitrosourea antitumor drugs mediated by isocyanate-induced damage and activation of heat shock transcription factor.

Science.gov (United States)

Kroes, R A; Abravaya, K; Seidenfeld, J; Morimoto, R I

1991-01-01

Treatment of cultured human tumor cells with the chloroethylnitrosourea antitumor drug 1,3-bis(2-chloroethyl)-1-nitrosourea (BCNU) selectively induces transcription and protein synthesis of a subset of the human heat shock or stress-induced genes (HSP90 and HSP70) with little effect on other stress genes or on expression of the c-fos, c-myc, or beta-actin genes. The active component of BCNU and related compounds appears to be the isocyanate moiety that causes carbamoylation of proteins and nucleic acids. Transcriptional activation of the human HSP70 gene by BCNU is dependent on the heat shock element and correlates with the level of heat shock transcription factor and its binding to the heat shock element in vivo. Unlike activation by heat or heavy metals, BCNU-mediated activation is strongly dependent upon new protein synthesis. This suggests that BCNU-induced, isocyanate-mediated damage to newly synthesized protein(s) may be responsible for activation of the heat shock transcription factor and increased transcription of the HSP90 and HSP70 genes. Images PMID:2052560

The preparation of new functionalized [2.2]paracyclophane derivatives with N-containing functional groups

Directory of Open Access Journals (Sweden)

Henning Hopf

2015-04-01

Full Text Available The two isomeric bis(isocyanates 4,12- and 4,16-di-isocyanato[2.2]paracyclophane, 16 and 28, have been prepared from their corresponding diacids by simple routes. The two isomers are versatile intermediates for the preparation of various cyclophanes bearing substituents with nitrogen-containing functional groups, e.g., the pseudo-ortho diamine 8, the bis secondary amine 23, and the crownophanes 18 and 19. Several of these new cyclophane derivatives (18, 19, 22, 26, 28 have been characterized by X-ray structural analysis.

Contribution of post-harvest agricultural paddy residue fires in the N.W. Indo-Gangetic Plain to ambient carcinogenic benzenoids, toxic isocyanic acid and carbon monoxide

Science.gov (United States)

Praphulla Chandra, Boggarapu; Sinha, Vinayak

2016-04-01

In the North West Indo-Gangetic Plain (N.W.IGP), large scale post-harvest paddy residue fires occur every year during the months of October-November. This anthropogenic perturbation causes contamination of the atmospheric environment with adverse impacts on regional air quality posing health risks for the population exposed to high concentrations of carcinogens such as benzene and toxic VOCs such as isocyanic acid. These gases and carbon monoxide are known to be emitted from biomass fires along with acetonitrile. Yet no long-term in-situ measurements quantifying the impact of this activity have been carried out in the N.W. IGP. Using high quality continuous online in-situ measurements of these gases at a strategic downwind site over a three year period from 2012 to 2014, we demonstrate the strong impact of this anthropogenic emission activity on ambient concentrations of these gases. In contrast to the pre-paddy harvest period, excellent correlation of benzenoids, isocyanic acid and CO with acetonitrile (a biomass burning chemical tracer); (r ≥ 0.82) and distinct VOC/acetonitrile emission ratios were observed for the post-paddy harvest period which was also characterized by high ambient concentrations of these species. The average concentrations of acetonitrile (1.62 ± 0.18 ppb), benzene (2.51 ± 0.28 ppb), toluene (3.72 ± 0.41 ppb), C8-aromatics (2.88 ± 0.30 ppb), C9-aromatics (1.55 ± 0.19 ppb) and CO (552 ± 113 ppb) in the post-paddy harvest periods were about 1.5 times higher than the annual average concentrations. For isocyanic acid, a compound with both primary and secondary sources, the concentration in the post-paddy harvest period was 0.97 ± 0.17 ppb. The annual average concentrations of benzene, a class A carcinogen, exceeded the annual exposure limit of 1.6 ppb at NTP mandated by the National Ambient Air Quality Standard of India (NAAQS). We show that mitigating the post-harvest paddy residue fires can lower the annual average concentration of

Isocyanate-functionalized chitin and chitosan as gelling agents of castor oil.

Science.gov (United States)

Gallego, Rocío; Arteaga, Jesús F; Valencia, Concepción; Franco, José M

2013-06-03

The main objective of this work was the incorporation of reactive isocyanate groups into chitin and chitosan in order to effectively use the products as reactive thickening agents in castor oil. The resulting gel-like dispersions could be potentially used as biodegradable lubricating greases. Three different NCO-functionalized polymers were obtained: two of them by promoting the reaction of chitosan with 1,6-hexamethylene diisocyanate (HMDI), and the other by using chitin instead of chitosan. These polymers were characterized through 1H-NMR, FTIR and thermogravimetric analysis (TGA). Thermal and rheological behaviours of the oleogels prepared by dispersing these polymers in castor oil were studied by means of TGA and small-amplitude oscillatory shear (SAOS) measurements. The evolution and values of the linear viscoelasticity functions with frequency for -NCO-functionalized chitosan- and chitin-based oleogels are quite similar to those found for standard lubricating greases. In relation to long-term stability of these oleogels, no phase separation was observed and the values of viscoelastic functions increase significantly during the first seven days of ageing, and then remain almost constant. TGA analysis showed that the degradation temperature of the resulting oleogels is higher than that found for traditional lubricating greases.

Excess Substrate is a Spectator Ligand in a Rhodium-Catalyzed Asymmetric [2+2+2] Cycloaddition of Alkenyl Isocyanates with Tolanes

Science.gov (United States)

Oinen, Mark Emil; Yu, Robert T.; Rovis, Tomislav

2009-01-01

Excess substrate has been identified as an unintended spectator ligand affecting enantioselectivity in the [2+2+2] cycloaddition of alkenyl isocyanates with tolanes. Replacement of excess substrate with an exogenous additive affords products with consistent and higher ee’s. The increase in enantioselectivity is the result of a change in composition of a proposed rhodium(III) intermediate on the catalytic cycle. The net result is a rational probe of a short-lived rhodium(III) intermediate, and gives insight that may have applications in many rhodium catalyzed reactions. PMID:19803471

Synthesis and Evaluation of New Phthalazine Urea and Thiourea Derivatives as Carbonic Anhydrase Inhibitors

Directory of Open Access Journals (Sweden)

Nurcan Berber

2013-01-01

Full Text Available A new series of phthalazine substituted urea and thiourea derivatives were synthesized, and their inhibitory effects on the activity of purified human carbonic anhydrases (hCAs I and II were evaluated. 2H-Indazolo[2,1-b]phthalazine-trione derivative (1 was prepared with 4-nitrobenzaldehyde, dimedone, and phthalhydrazide in the presence of TFA in DMF, and nitro group was reduced to amine derivative (2 with SnCl2·2H2O. The compound was reacted with isocyanates and isothiocyanates to get the final products (3a–p. The results showed that all the synthesized compounds inhibited the CA isoenzymes activity. 3a (IC50 = 6.40 µM for hCA I and 6.13 µM for hCA II has the most inhibitory effect. The synthesized compounds are very bulky to be able to bind near the zinc ion, and they much more probably bind as the coumarin derivatives.

Synthesis and biological evaluation of novel urea and thiourea derivatives of valacyclovir

Directory of Open Access Journals (Sweden)

Katla Ramana Venkata

2014-01-01

Full Text Available A series of novel urea and thiourea derivatives of valacyclovir were efficiently synthesized in high yields and evaluated their antiviral activity. 2-((6-Amino-4-oxo-4,5-dihydro-1H-imidazo[4,5-c]pyridin-1-ylmethoxyethyl-2-amino-3-ethylbutanoate (valacyclovir 1 is reacted with various aromatic isocyanates/thiocyanates 2 in the presence of N, N- dimethyl piperazine as a base in THF: pyridine (4:1 to obtain valacyclovir urea/thiourea derivatives 3(a-j. The structures of the title compounds 3(a-j were confirmed by IR, NMR (1H, 13C, mass spectral and elemental analysis. The newly synthesized compounds were screened for their antiviral activity against Tobacco mosaic virus (TMV and antioxidant activity was evaluated by DPPH, SOD and GST methods. The title compounds exhibited potent antiviral and good antioxidant activities.

Contribution of post-harvest agricultural paddy residue fires in the N.W. Indo-Gangetic Plain to ambient carcinogenic benzenoids, toxic isocyanic acid and carbon monoxide.

Science.gov (United States)

Chandra, B P; Sinha, Vinayak

2016-03-01

In the north west Indo-Gangetic Plain (N.W.IGP), large scale post-harvest paddy residue fires occur every year during the months of October-November. This anthropogenic perturbation causes contamination of the atmospheric environment with adverse impacts on regional air quality posing health risks for the population exposed to high concentrations of carcinogens such as benzene and toxic VOCs such as isocyanic acid. These gases and carbon monoxide are known to be emitted from biomass fires along with acetonitrile. Yet no long-term in-situ measurements quantifying the impact of this activity have been carried out in the N.W. IGP. Using high quality continuous online in-situ measurements of these gases at a strategic downwind site over a three year period from 2012 to 2014, we demonstrate the strong impact of this anthropogenic emission activity on ambient concentrations of these gases. In contrast to the pre-paddy harvest period, excellent correlation of benzenoids, isocyanic acid and CO with acetonitrile (a biomass burning chemical tracer); (r≥0.82) and distinct VOC/acetonitrile emission ratios were observed for the post-paddy harvest period which was also characterized by high ambient concentrations of these species. The average concentrations of acetonitrile (1.62±0.18ppb), benzene (2.51±0.28ppb), toluene (3.72±0.41ppb), C8-aromatics (2.88±0.30ppb), C9-aromatics (1.55±0.19ppb) and CO (552±113ppb) in the post-paddy harvest periods were about 1.5 times higher than the annual average concentrations. For isocyanic acid, a compound with both primary and secondary sources, the concentration in the post-paddy harvest period was 0.97±0.17ppb. The annual average concentrations of benzene, a class A carcinogen, exceeded the annual exposure limit of 1.6ppb at NTP mandated by the National Ambient Air Quality Standard of India (NAAQS). We show that mitigating the post-harvest paddy residue fires can lower the annual average concentration of benzene and ensure

Hydroformylation catalyst comprising a complex with ligands having a structure derived from bisphenol A

NARCIS (Netherlands)

2002-01-01

Ethylenically unsaturated compounds are hydroformylated in the presence of a hydroformylation catalyst comprising at least one complex of a metal of transition group VIII with at least one phosphorus-containing compound as ligand, where this compound contains two groups which contain P atoms and are

Nucleophilic reactions of hydrazido(2-) complexes of molybdenum and tungsten with succinyl dichloride and phenyl isocyanate

International Nuclear Information System (INIS)

Iwanami, Kiyotaka; Mizobe, Yasushi; Takahashi, Tamotsu; Kodama, Teruyuki; Uchida, Yasuzo

1981-01-01

Nucleophilic attack of the WNNH 2 group in the hydrazido(2-) complex [WF(NNH 2 )(dpe) 2 ][BF 4 ] (dpe = Ph 2 PCH 2 CH 2 PPh 2 ) on succinyl dichloride gives a novel ethanedioylhydrazido(2-) complex, [WF(NNCOCH 2 CH 2 CO)(dpe) 2 ][BF 4 ]. X-Ray structural analysis shows that the carbon, nitrogen, and oxygen atoms of the ethanedioylhydrazido(2-) ligand lie nearly in the same plane, indicating sp 2 character of the nitrogen atom bearing the two carbonyl groups. Phenyl isocyanate also undergoes nucleophilic attack by the hydrazido(2-) complex [MBr(NNH 2 )(dpe) 2 ]Br (M = Mo or W) to yield the phenylsemicarbazido(2-) type complex, [MBr(NNHCONHPh)(dpe) 2 ]Br. Treatment of the semicarbazido(2-) complex with triethylamine gives a new diazenido complex [MBr(NNCONHPh)(dpe) 2 ]. (author)

Synthesis and Characterization of Starch-based Aqueous Polymer Isocyanate Wood Adhesive

Directory of Open Access Journals (Sweden)

Shu-min Wang

2015-09-01

Full Text Available Modified starch was prepared in this work by acid-thinning and oxidizing corn starch with ammonium persulfate. Also, starch-based aqueous polymer isocyanate (API wood adhesive was prepared. The effect of the added amount of modified starch, styrene butadiene rubber (SBR, polymeric diphenylmethane diisocyanate (P-MDI, and the mass concentration of polyvinyl alcohol (PVOH on the bonding strength of starch-based API adhesives were determined by orthogonal testing. The starch-based API adhesive performance was found to be the best when the addition of modified starch (mass concentration 35% was 45 g, the amount of SBR was 3%, the PVOH mass concentration was 10%, and the amount of P-MDI was 18%. The compression shearing of glulam produced by starch-based API adhesive reached bonding performance indicators of I type adhesive. A scanning electron microscope (SEM was used to analyze the changes in micro-morphology of the starch surface during each stage. Fourier transform infrared spectroscopy (FT-IR was used to study the changes in absorption peaks and functional groups from starch to starch-based API adhesives. The results showed that during starch-based API adhesive synthesis, corn starch surface was differently changed and it gradually reacted with other materials.

Palladium-catalyzed cyclization reactions of 2-vinylthiiranes with heterocumulenes. Regioselective and enantioselective formation of thiazolidine, oxathiolane, and dithiolane derivatives.

Science.gov (United States)

Larksarp, C; Sellier, O; Alper, H

2001-05-18

The first palladium-catalyzed ring-expansion reaction of 2-vinylthiiranes with heterocumulenes to form sulfur-containing five-membered-ring heterocycles is described. This regioselective reaction requires 5 mol % of Pd(2)(dba)(3).CHCl(3) and 10 mol % of bidendate phosphine ligand (dppp, BINAP), at 50-80 degrees C, in THF. The reaction of 2-vinylthiiranes with carbodiimides, isocyanates, and ketenimines affords 1,3-thiazolidine derivatives, whereas the reaction with diphenylketene or isothiocyanates results in the formation of 1,3-oxathiolane or 1,3-dithiolane compounds in good to excellent isolated yields and in up to 78% ee.

Method of forming a nanocluster comprising dielectric layer and device comprising such a layer

NARCIS (Netherlands)

2009-01-01

A method of forming a dielectric layer (330) on a further layer (114, 320) of a semiconductor device (300) is disclosed. The method comprises depositing a dielectric precursor compound and a further precursor compound over the further layer (114, 320), the dielectric precursor compound comprising a

Casting materials

Science.gov (United States)

Chaudhry, Anil R [Xenia, OH; Dzugan, Robert [Cincinnati, OH; Harrington, Richard M [Cincinnati, OH; Neece, Faurice D [Lyndurst, OH; Singh, Nipendra P [Pepper Pike, OH

2011-06-14

A foam material comprises a liquid polymer and a liquid isocyanate which is mixed to make a solution that is poured, injected or otherwise deposited into a corresponding mold. A reaction from the mixture of the liquid polymer and liquid isocyanate inside the mold forms a thermally collapsible foam structure having a shape that corresponds to the inside surface configuration of the mold and a skin that is continuous and unbroken. Once the reaction is complete, the foam pattern is removed from the mold and may be used as a pattern in any number of conventional casting processes.

Compositions comprising free-standing two-dimensional nanocrystals

Energy Technology Data Exchange (ETDEWEB)

Barsoum, Michel W.; Gogotsi, Yury; Abdelmalak, Michael Naguib; Mashtalir, Olha

2017-12-05

The present invention is directed to methods of transferring urea from an aqueous solution comprising urea to a MXene composition, the method comprising contacting the aqueous solution comprising urea with the MXene composition for a time sufficient to form an intercalated MXene composition comprising urea.

BALLISTIC RESISTANT ARTICLES COMPRISING TAPES

NARCIS (Netherlands)

VAN DER EEM, JORIS; HARINGS, JULES; JANSE, GERARDUS; TJADEN, HENDRIK

2015-01-01

The invention pertains to a ballistic-resistant moulded article comprising a compressed stack of sheets comprising reinforcing tapes having a tensile strength of at least 1.0 GPa, a tensile modulus of at least 40 GPa, and a tensile energy-to-break of at least 15 J/g, the direction of the tapes

Ytterbium triflate as a new catalyst on the curing of epoxy-isocyanate based thermosets

Energy Technology Data Exchange (ETDEWEB)

Flores, Marjorie; Fernandez-Francos, Xavier [Departament de Quimica Analitica i Quimica Organica, Universitat Rovira i Virgili, Marcelli Domingo s/n, 43007 Tarragona (Spain); Morancho, Josep M. [Laboratori de Termodinamica, ETSEIB, Universitat Politecnica de Catalunya, Diagonal 647, 08028 Barcelona (Spain); Serra, Angels [Departament de Quimica Analitica i Quimica Organica, Universitat Rovira i Virgili, Marcelli Domingo s/n, 43007 Tarragona (Spain); Ramis, Xavier, E-mail: ramis@mmt.upc.es [Laboratori de Termodinamica, ETSEIB, Universitat Politecnica de Catalunya, Diagonal 647, 08028 Barcelona (Spain)

2012-09-10

Highlights: Black-Right-Pointing-Pointer Ytterbium triflate is an active catalyst for diepoxides/diisocyanate formulations. Black-Right-Pointing-Pointer Ytterbium triflate promotes the formation of oxazolidone, isocyanurate, urethane and allophanate groups and the polyetherification of epoxides. Black-Right-Pointing-Pointer Diepoxides/diisocyanate formulations catalyzed by ytterbium triflate show higher pot-life than equivalent formulations catalyzed by benzyldimethylamine. - Abstract: Networks containing oxazolidone, isocyanurate, urethane, allophanate and ether groups were prepared by copolymerization of mixtures of diglycidylether of bisphenol A and toluene-2,4-diisocyanate in presence of ytterbium triflate. It has been demonstrated that ytterbium triflate promotes six elemental reactions that coexist during curing and yield the aforementioned groups. Changes during curing, fraction of different groups present in the network and final properties of the cured materials were investigated by thermal analysis and infrared spectroscopy. The influence of the molar ratio of isocyanate to epoxide groups on the properties and curing has been studied. The curing kinetics were analyzed by means of an integral isoconversional non-isothermal procedure. The results obtained were compared with those obtained by using a common catalyst such as the benzyldimethylamine. The structure and the properties of the resulting thermosets are controlled by the initial composition of the formulation and the catalyst used.

Copolymer semiconductors comprising thiazolothiazole or benzobisthiazole, or benzobisoxazole electron acceptor subunits, and electron donor subunits, and their uses in transistors and solar cells

Science.gov (United States)

Jenekhe, Samson A; Subramaniyan, Selvam; Ahmed, Eilaf; Xin, Hao; Kim, Felix Sunjoo

2014-10-28

The inventions disclosed, described, and/or claimed herein relate to copolymers comprising copolymers comprising electron accepting A subunits that comprise thiazolothiazole, benzobisthiazole, or benzobisoxazoles rings, and electron donating subunits that comprise certain heterocyclic groups. The copolymers are useful for manufacturing organic electronic devices, including transistors and solar cells. The invention also relates to certain synthetic precursors of the copolymers. Methods for making the copolymers and the derivative electronic devices are also described.

Free radical explosive composition

Science.gov (United States)

Walker, Franklin E.; Wasley, Richard J.

1979-01-01

An improved explosive composition is disclosed and comprises a major portion of an explosive having a detonation velocity between about 1500 and 10,000 meters per second and a minor amount of a getter additive comprising a compound or mixture of compounds capable of capturing or deactivating free radicals or ions under mechanical or electrical shock conditions and which is not an explosive. Exemplary getter additives are isocyanates, olefins and iodine.

Effect of spatial distribution of wax and PEG-isocyanate on the morphology and hydrophobicity of starch films.

Science.gov (United States)

Muscat, Delina; Adhikari, Raju; Tobin, Mark J; McKnight, Stafford; Wakeling, Lara; Adhikari, Benu

2014-10-13

This study proposes a novel method for improving surface hydrophobicity of glycerol plasticized high amylose (HAG) films. We used polyethylene glycol isocyanate (PEG-iso) crosslinker to link HAG and three natural waxes (beeswax, candelilla wax and carnauba wax) to produce HAG+wax+PEG-iso films. The spatial distributions of wax and PEG-iso across the thickness of these films were determined using Synchrotron-based Fourier transform infrared spectroscopy. The hydrophobicity and surface morphology of the films were determined using contact angle (CA) and scanning electron microscopic measurements, respectively. The distribution patterns of wax and the PEG-iso across the thickness of the film, and the nature of crystalline patterns formed on the surface of these films were found to be the key factors affecting surface hydrophobicity. The highest hydrophobicity (CA >90°) was created when the PEG-iso was primarily distributed in the interior of the films and a hierarchical circular pinnacle structure of solidified wax was formed on the surface. Copyright © 2014 Elsevier Ltd. All rights reserved.

Electrochemical energy storage devices comprising self-compensating polymers

Science.gov (United States)

Johnson, Paul; Bautista-Martinez, Jose Antonio; Friesen, Cody; Switzer, Elise

2018-01-30

The disclosed technology relates generally to devices comprising conductive polymers and more particularly to electrochemical devices comprising self-compensating conductive polymers. In one aspect, electrochemical energy storage device comprises a negative electrode comprising an active material including a redox-active polymer. The device additionally comprises a positive electrode comprising an active material including a redox-active polymer. The device further comprises an electrolyte material interposed between the negative electrode and positive electrode and configured to conduct mobile counterions therethrough between the negative electrode and positive electrode. At least one of the negative electrode redox-active polymer and the positive electrode redox-active polymer comprises a zwitterionic polymer unit configured to reversibly switch between a zwitterionic state in which the zwitterionic polymer unit has first and second charge centers having opposite charge states that compensate each other, and a non-zwitterionic state in which the zwitterionic polymer unit has one of the first and second charge centers whose charge state is compensated by mobile counterions.

Semiconductor device comprising a pn-heterojunction

NARCIS (Netherlands)

2007-01-01

An electric device is disclosed comprising a pn-heterojunction ( 4 ) formed by a nanowire ( 3 ) of 111 -V semiconductor material and a semiconductor body ( 1 ) comprising a group IV semiconductor material. The nanowire ( 3 ) is positioned in direct contact with the surface ( 2 ) of the semiconductor

Coating compositions comprising bismuth-alloyed zinc

DEFF Research Database (Denmark)

2008-01-01

The present application discloses (i) a coating composition comprising a particulate zinc-based alloyed material, said material comprising 0.05-0.7% by weight of bismuth (Bi), the D50 of the particulate material being in the range of 2.5-30 µm; (ii) a coated structure comprising a metal structure...... having a first coating of the zinc-containing coating composition applied onto at least a part of the metal structure in a dry film thickness of 5-100 µm; and an outer coating applied onto said zinc-containing coating in a dry film thickness of 30-200 µm; (iii) a particulate zinc-based alloyed material......, wherein the material comprises 0.05-0.7%(w/w) of bismuth (Bi), and wherein the D50 of the particulate material is in the range of 2.5-30 µm; (iv) a composite powder consisting of at least 25%(w/w) of the particulate zinc-based alloyed material, the rest being a particulate material consisting of zinc...

Mechanistic studies on the conjugation of methyl isocyanate with N-Acetyl-Cysteine in rats

International Nuclear Information System (INIS)

Hu, P.; Davis, M.R.; Baillie, T.A.

1996-01-01

In order to investigate the utility of selected thiols as scavengers of MIC, we first assessed the chemical stability of SMG, AMCC and SMC by measuring their rates of reaction in vitro with thiorphan. The initial rates of carbamoylation of thiorpan (0.5 mM) by the above conjugates (0.5 mM) in aqeous buffer at pH 7.4 and 37 deg C were 2.51, 0.76 and 8.47 μmol L -1 min -1 , repectively, indicating that the mercapturate AMCC was the most stable of the three MIC conjugates. In light of these results, studies were conducted to examine the effect of pretreatment with N-acetyl-L-cysteine (L-NAC; 500 mg kg -1 , i.p.) on the urinary elimination of AMCC in rats dosed with MIC (15 mg kg -1 , i.p.). In separate experiments, groups of rats were pretreated with either N-acetyl-D-cysteine (D-NAC) or N-trideuteroacetyl-L-cysteine (d 3 -L-NAC) in order to explore the mechanism by which MIC undergoes conjugation to AMCC in vivo. The results indicated that exogenous NAC effectively enhancess the urinary excretion of MIC in the form of AMCC, and that it does so lagerly by direct conjugation with the isocyanate, rather than via biosynthesis to GSH. (author). 9 refs., 5 figs

Uptake and distribution of 14C during and following exposure to [14C]methyl isocyanate

International Nuclear Information System (INIS)

Ferguson, J.S.; Kennedy, A.L.; Stock, M.F.; Brown, W.E.; Alarie, Y.

1988-01-01

Guinea pigs were exposed to [ 14 C]methyl isocyanate ( 14 CH 3 -NCO, 14 C MIC) for periods of 1 to 6 hr at concentrations of 0.5 to 15 ppm. Arterial blood samples taken during exposure revealed immediate and rapid uptake of 14 C. Clearance of 14 C was then gradual over a period of 3 days. Similarly 14 C was present in urine and bile immediately following exposure, and clearance paralleled that observed in blood. Guinea pigs fitted with a tracheal cannula and exposed while under anesthesia showed a reduced 14 C uptake in blood indicating that most of the 14 C MIC uptake in normal guinea pigs occurred from retention of this agent in the upper respiratory tract passages. In exposed guinea pigs 14 C was distributed to all examined tissues. In pregnant female mice similarly exposed to 14 C MIC, 14 C was observed in all tissues examined following exposure including the uterus, placenta, and fetus. While the form of 14 C distributed in blood and tissues has not yet been identified, these findings may help to explain the toxicity of MIC or MIC reaction products on organs other than the respiratory tract, as noted by several investigators

Cationic electrodepositable coating composition comprising lignin

Science.gov (United States)

Fenn, David; Bowman, Mark P; Zawacky, Steven R; Van Buskirk, Ellor J; Kamarchik, Peter

2013-07-30

A cationic electrodepositable coating composition is disclosed. The present invention in directed to a cationic electrodepositable coating composition comprising a lignin-containing cationic salt resin, that comprises (A) the reaction product of: lignin, an amine, and a carbonyl compound; (B) the reaction product of lignin, epichlorohydrin, and an amine; or (C) combinations thereof.

Overview of VOC emissions and chemistry from PTR-TOF-MS measurements during the SusKat-ABC campaign: high acetaldehyde, isoprene and isocyanic acid in wintertime air of the Kathmandu Valley

Science.gov (United States)

Sarkar, Chinmoy; Sinha, Vinayak; Kumar, Vinod; Rupakheti, Maheswar; Panday, Arnico; Mahata, Khadak S.; Rupakheti, Dipesh; Kathayat, Bhogendra; Lawrence, Mark G.

2016-03-01

= 60.051), which can photochemically produce isocyanic acid in the atmosphere, are reported in this study along with nitromethane (a tracer for diesel exhaust), which has only recently been detected in ambient studies. Two distinct periods were selected during the campaign for detailed analysis: the first was associated with high wintertime emissions of biogenic isoprene and the second with elevated levels of ambient acetonitrile, benzene and isocyanic acid from biomass burning activities. Emissions from biomass burning and biomass co-fired brick kilns were found to be the dominant sources for compounds such as propyne, propene, benzene and propanenitrile, which correlated strongly with acetonitrile (r2 > 0.7), a chemical tracer for biomass burning. The calculated total VOC OH reactivity was dominated by acetaldehyde (24.0 %), isoprene (20.2 %) and propene (18.7 %), while oxygenated VOCs and isoprene collectively contributed to more than 68 % of the total ozone production potential. Based on known secondary organic aerosol (SOA) yields and measured ambient concentrations in the Kathmandu Valley, the relative SOA production potential of VOCs were benzene > naphthalene > toluene > xylenes > monoterpenes > trimethylbenzenes > styrene > isoprene. The first ambient measurements from any site in South Asia of compounds with significant health effects such as isocyanic acid, formamide, acetamide, naphthalene and nitromethane have been reported in this study. Our results suggest that mitigation of intense wintertime biomass burning activities, in particular point sources such biomass co-fired brick kilns, would be important to reduce the emission and formation of toxic VOCs (such as benzene and isocyanic acid) in the Kathmandu Valley.

Molecularly oriented surface relief formation in polymethacrylates comprising N-benzylideneaniline derivative side groups

Science.gov (United States)

Kawatsuki, Nobuhiro; Hosoda, Risa; Kondo, Mizuho; Sasaki, Tomoyuki; Ono, Hiroshi

2014-12-01

Molecularly oriented surface relief (SR) formation in polymethacrylates with N-benzylideneaniline (NBA) derivative side groups is investigated by holographic exposure using a 325 nm He-Cd laser. Because the NBA moieties show a photoinduced orientation perpendicular to the polarization of light, polarization holography successfully forms a molecularly oriented SR structure in accordance with the polarization distribution that includes p-polarized components. Although intensity holography induces molecular orientation, it does not generate a satisfactory SR structure. In all the holographic modes, the SR depth depends on the direction of the C=N bonds in the NBA moieties and the photoproducts affect the SR formation ability.

Skin exposure to aliphatic polyisocyanates in the auto body repair and refinishing industry: II. A quantitative assessment.

Science.gov (United States)

Bello, Dhimiter; Redlich, Carrie A; Stowe, Meredith H; Sparer, Judy; Woskie, Susan R; Streicher, Robert P; Hosgood, H Dean; Liu, Youcheng

2008-03-01

Skin exposure to isocyanates, in addition to respiratory exposures, may contribute to sensitization and asthma. Quantitative skin exposure data are scarce and quantitative methods limited. As part of the Survey of Painters and Repairers of Autobodies by Yale study, a method to sample and quantify human isocyanate skin exposure was developed (based on NIOSH 5525 method) and used to evaluate aliphatic isocyanate skin exposure in 81 auto body shop painters and body technicians. Wipe samples were collected from unprotected skin and from under PPE (gloves, clothing and respirator) using a polypropylene glycol-impregnated wipe. Hexamethylene diisocyanate (HDI), its polyisocyanates [HDI-derived polyisocyanates (pHDI)], isophorone diisocyanate (IPDI) and its polyisocyanates and IPDI-derived polyisocyanates (pIPDI) were quantified separately and also expressed as the total free isocyanate groups (total NCO). For unprotected skin areas, 49 samples were collected for spray painting, 13 for mixing, 27 for paint-related tasks (e.g. sanding and compounding) and 53 for non-paint-related tasks. Forty-three samples were also collected under PPE. The geometric mean (GM) [geometric standard deviation (GSD)] total NCO concentrations (ng NCO cm(-2)) for unprotected skin (hands, face and forearms) was 1.9 (10.9) and range 0.0-64.4. pHDI species were the major contributor to the total NCO content. Levels were very variable, with the highest concentrations measured for clear coating and paint mixing tasks. Isocyanate skin exposure was also commonly detected under PPE, with 92% of samples above the limit of detection. Levels were very variable with the overall GM (GSD) total NCO (ng NCO cm(-2)) under PPE 1.0 (5.2) and range (0.0-47.0) and similar under the different PPE (glove, respirator and clothing). The highest concentrations were detected for mixing and spraying tasks, 6.9 (5.3) and 1.0 (5.2), respectively. Levels under PPE were generally lower than unpaired samples obtained with no

A new class of nitrosoureas. 4. Synthesis and antitumor activity of disaccharide derivatives of 3,3-disubstituted 1-(2-chloroethyl)-1-nitrosoureas.

Science.gov (United States)

Tsujihara, K; Ozeki, M; Morikawa, T; Kawamori, M; Akaike, Y; Arai, Y

1982-04-01

A series of 33 N-(2-chloroethyl)-N-nitrosocarbamoyl derivatives of N-substituted glycosylamines has been prepared and tested for antitumor activities. The compounds were obtained by reaction of glycosylamines with isocyanate, followed by nitrosation with N2O4. Structure-activity relationships of these trisubstituted nitrosoureas were investigated by varying the N-substituents and disaccharide groups and by comparing them with the corresponding disubstituted analogues. A large number of the nitrosoureas bearing a maltosyl group exhibited strong antitumor activities against leukemia L1210 and Ehrlich ascites carcinoma, and 60-day survivors against leukemia L1210 were found at the optimal dose for these derivatives. In contrast, the lactosyl and the melibiosyl derivatives were almost inactive. The most interesting compound in this series, the 3-isobutyl-3-maltosyl derivative (37), was tested against leukemia L1210 by single and multiple treatment. Its therapeutic ratio (96.3) obtained by multiple treatment is 3 times larger than that (31.5) obtained by single treatment, suggesting a possible clinical utility of 37 by multiple treatment. The favorable effect of a maltosyl moiety in this class of compounds is discussed.

GAS SEPARATION MEMBRANES COMPRISING PERMEABILITY ENHANCING ADDITIVES

NARCIS (Netherlands)

Wessling, Matthias; Sterescu, D.M.; Stamatialis, Dimitrios

2007-01-01

The present invention relates to polymer compositions comprising a (co)polymer comprising (a) an arylene oxide moiety and (b) a dendritic (co)polymer, a hyperbranched (co)polymer or a mixture thereof, and the use of these polymer compositions as membrane materials for the separation of gases. The

Medical preparation container comprising microwave powered sensor assembly

DEFF Research Database (Denmark)

2016-01-01

The present invention relates to a medical preparation container which comprises a microwave powered sensor assembly. The microwave powered sensor assembly comprises a sensor configured to measure a physical property or chemical property of a medical preparation during its heating in a microwave ...... oven. The microwave powered sensor assembly is configured for harvesting energy from microwave radiation emitted by the microwave oven and energize the sensor by the harvested microwave energy.......The present invention relates to a medical preparation container which comprises a microwave powered sensor assembly. The microwave powered sensor assembly comprises a sensor configured to measure a physical property or chemical property of a medical preparation during its heating in a microwave...

Modificação do acetato de celulose em meio homogêneo via reações de condensação com diferentes isocianatos Homogeneous chemical modification of cellulose acetate using different isocyanates

Directory of Open Access Journals (Sweden)

Vagner R. Botaro

1998-01-01

Full Text Available Este estudo descreve uma série de reações envolvendo os grupos isocianatos (NCO e os grupos hidroxílicos do acetato de celulose com grau de substituição (DS igual a 2,4. As reações foram realizadas em meio homogêneo e utilizaram dois isocianatos estruturalmente diferentes: o 3-isopropenil-,'-dimetilbenzil isocianato (TMI e o 2-isocianato-etil metacrilato (IEM. Um acompanhamento cinético das reações foi realizado por espectroscopia na região do infravermelho, onde acompanhou-se o desaparecimento da banda típica de isocianato a aproximadamente 2260 cm-1. Filmes de acetato de celulose modificados foram obtidos após as reações, sendo posteriormente caracterizados por análises de ângulos de contato, espectroscopia na região do infravermelho e ensaios de tração.This investigation describes a series of homogeneous reactions involving the OH groups of cellulose acetate with a DS of 2.4 and two alkenyl isocyanates, viz. 3-isopropyl a,a-dimethylbenzyl isocyanate (TMI and 2-isocyanato-ethyl methacrylate (IEM. The kinetics of these reactions were followed by FTIR spectroscopy by monitoring the decrease in intensity with time of the band around 2260 cm-1. The product of these condensations were isolated as thin films which were characterized by FTIR spectroscopy, surface hydrophilic-hydrophobic evaluation through contact angle measurements and tensile strength.

Artificial skin and patient simulator comprising the artificial skin

NARCIS (Netherlands)

2011-01-01

The invention relates to an artificial skin (10, 12, 14), and relates to a patient simulator (100) comprising the artificial skin. The artificial skin is a layered structure comprising a translucent cover layer (20) configured for imitating human or animal skin, and comprising a light emitting layer

Coated silicon comprising material for protection against environmental corrosion

Science.gov (United States)

Hazel, Brian Thomas (Inventor)

2009-01-01

In accordance with an embodiment of the invention, an article is disclosed. The article comprises a gas turbine engine component substrate comprising a silicon material; and an environmental barrier coating overlying the substrate, wherein the environmental barrier coating comprises cerium oxide, and the cerium oxide reduces formation of silicate glass on the substrate upon exposure to corrodant sulfates.

Ball bearings comprising nickel-titanium and methods of manufacture thereof

Science.gov (United States)

DellaCorte, Christopher (Inventor); Glennon, Glenn N. (Inventor)

2012-01-01

Disclosed herein is a friction reducing nickel-titanium composition. The nickel-titanium composition includes a first phase that comprises nickel and titanium in an atomic ratio of about 0.45:0.55 to about 0.55:0.45; a second phase that comprises nickel and titanium in an atomic ratio of about 0.70:0.30 to about 0.80:0.20; and a third phase that comprises nickel and titanium in an atomic ratio of about 0.52:0.48 to about 0.62:0.38. A bearing for reducing friction comprising a nickel-titanium composition comprising a first phase that comprises nickel and titanium in an atomic ratio of about 0.45:0.55 to about 0.55:0.45; a second phase that comprises nickel and titanium in an atomic ratio of about 0.70:0.30 to about 0.80:0.20; and a third phase that comprises nickel and titanium in an atomic ratio of about 0.52:0.48 to about 0.62:0.38; where the bearing is free from voids and pinholes.

Printhead and inkjet printer comprising such a printhead

NARCIS (Netherlands)

2007-01-01

The invention relates to a printhead comprising multiple substantially closed ink chambers (13), the ink chambers being mutually separated by at least one wall (12), wherein each of the chambers comprises an electro-mechanical converter (15), where actuation of the converter leads to a volume change

Ionic liquids comprising heteraromatic anions

Energy Technology Data Exchange (ETDEWEB)

Schneider, William F.; Brennecke, Joan F.; Maginn, Edward J.; Mindrup, Elaine; Gurkan, Burcu; Price, Erica; Goodrich, Brett

2018-04-24

Some embodiments described herein relate to ionic liquids comprising an anion of a heteraromatic compound such as optionally substituted pyrrolide, optionally substituted pyrazolide, optionally substituted indolide, optionally substituted phospholide, or optionally substituted imidazolide. Methods and devices for gas separation or gas absorption related to these ionic liquids are also described herein.

Purification and crystallization of a trimodular complex comprising the type II cohesin–dockerin interaction from the cellulosome of Clostridium thermocellum

International Nuclear Information System (INIS)

Adams, Jarrett J.; Pal, Gour; Yam, Katherine; Spencer, Holly L.; Jia, Zongchao; Smith, Steven P.

2004-01-01

A trimodular complex comprising the type II cohesin–dockerin interaction from the cellulosome of C. thermocellum has been purified and crystallized by the hanging-drop vapour-diffusion method. A native crystal and a selenomethionine derivative have been analyzed using X-ray diffraction. The high-affinity calcium-mediated type II cohesin–dockerin interaction is responsible for the attachment of the multi-enzyme cellulose-degrading complex, termed the cellulosome, to the cell surface of the thermophilic anaerobe Clostridium thermocellum. A trimodular 40 kDa complex comprising the SdbA type II cohesin and the the CipA type II dockerin–X module modular pair from the cellulosome of C. thermocellum has been crystallized. The crystals belong to space group P2 1 2 1 2 1 , with unit-cell parameters a = 45.21, b = 52.34, c = 154.69 Å. The asymmetric unit contains one molecule of the protein complex and native and selenomethionine-derivative crystals diffracted to 2.1 and 2.0 Å, respectively

Compositions, methods, and systems comprising fluorous-soluble polymers

Science.gov (United States)

Swager, Timothy M.; Lim, Jeewoo; Takeda, Yohei

2015-10-13

The present invention generally relates to compositions, methods, and systems comprising polymers that are fluorous-soluble and/or organize at interfaces between a fluorous phase and a non-fluorous phase. In some embodiments, emulsions or films are provided comprising a polymer. The polymers, emulsions, and films can be used in many applications, including for determining, treating, and/or imaging a condition and/or disease in a subject. The polymer may also be incorporated into various optoelectronic device such as photovoltaic cells, organic light-emitting diodes, organic field effect transistors, or the like. In some embodiments, the polymers comprise pi-conjugated backbones, and in some cases, are highly emissive.

MALDI-TOF and 13C NMR Analysis of Tannin–Furanic–Polyurethane Foams Adapted for Industrial Continuous Lines Application

Directory of Open Access Journals (Sweden)

Maria Cecilia Basso

2014-12-01

Full Text Available Mixed phenolic-polyurethane-type rigid foams were developed using tannin-furfuryl alcohol natural materials co-reacted with polymeric isocyanate in the proportions imposed by the limitations inherent to continuous industrial plants for polyurethane foams. A variety of different copolymerization oligomers formed. Urethanes appeared to have been formed with two flavonoid tannin sites, mainly at the flavonoid hydroxyl group at C3, but also, although less, on the phenolic hydroxyl groups of the flavonoid oligomers. Urethanes are also formed with (i glyoxal in the formulation, be it pre-reacted or not with the tannin; (ii with phenolsulfonic acid and (iii with furfural. This latter one, however, greatly favors reaction with the A-ring of the flavonoids through a methylene bridge rather than reaction with the isocyanate groups to form urethanes. All of the materials appeared to have co-reacted in a manner to form urethane and methylene bridges between all of the main components used. Thus, the tannin, the furfuryl alcohol, the isocyanate, the glyoxal and even the phenol sulfonic acid hardener formed a number of mixed species linked by the two bridge types. Several mixed species comprised of 2, 3 and even 4 co-reacted different components have been observed.

Enantioselective Rhodium-Catalyzed [2+2+2] Cycloadditions of Terminal Alkynes and Alkenyl Isocyanates: Mechanistic Insights Lead to a Unified Model that Rationalizes Product Selectivity

Science.gov (United States)

Dalton, Derek M.; Oberg, Kevin M.; Yu, Robert T.; Lee, Ernest E.; Perreault, Stéphane; Oinen, Mark Emil; Pease, Melissa L.; Malik, Guillaume; Rovis, Tomislav

2009-01-01

This manuscript describes the development and scope of the asymmetric rhodium-catalyzed [2+2+2] cycloaddition of terminal alkynes and alkenyl isocyanates leading to the formation of indolizidine and quinolizidine scaffolds. The use of phosphoramidite ligands proved crucial for avoiding competitive terminal alkyne dimerization. Both aliphatic and aromatic terminal alkynes participate well, with product selectivity a function of both the steric and electronic character of the alkyne. Manipulation of the phosphoramidite ligand leads to tuning of enantio- and product selectivity, with a complete turnover in product selectivity seen with aliphatic alkynes when moving from Taddol-based to biphenol-based phosphoramidites. Terminal and 1,1-disubstituted olefins are tolerated with nearly equal efficacy. Examination of a series of competition experiments in combination with analysis of reaction outcome shed considerable light on the operative catalytic cycle. Through a detailed study of a series of X-ray structures of rhodium(cod)chloride/phosphoramidite complexes, we have formulated a mechanistic hypothesis that rationalizes the observed product selectivity. PMID:19817441

Towards Green Cyclic Carbonate Synthesis : Heterogeneous and Homogeneous Catalyst Development

NARCIS (Netherlands)

Stewart, J.A.

2015-01-01

This PhD research serves to implement both known and novel catalytic systems for the purpose of cyclic carbonate synthesis from biomass-derived substrates. Such products have been earmarked as potential monomers for non-isocyanate polyurethanes (NIPUs), amongst other uses. Particular attention has

Dielectric electroactive polymers comprising an ionic supramolecular structure

DEFF Research Database (Denmark)

2014-01-01

The present invention relates to an ionic interpenetrating polymer network comprising at least one elastomer and an ionic supramolecular structure comprising the reaction product of at least two chemical compounds wherein each of said compounds has at least two functional groups and wherein said ...... compounds are able to undergo Lewis acid-base reactions. The interpenetrating polymer network may be used as dielectric electroactive polymers (DEAPs) having a high dielectric permittivity....

Investigating diesel engines as an atmospheric source of isocyanic acid in urban areas

Directory of Open Access Journals (Sweden)

S. H. Jathar

2017-07-01

Full Text Available Isocyanic acid (HNCO, an acidic gas found in tobacco smoke, urban environments, and biomass-burning-affected regions, has been linked to adverse health outcomes. Gasoline- and diesel-powered engines and biomass burning are known to emit HNCO and hypothesized to emit precursors such as amides that can photochemically react to produce HNCO in the atmosphere. Increasingly, diesel engines in developed countries like the United States are required to use selective catalytic reduction (SCR systems to reduce tailpipe emissions of oxides of nitrogen. SCR chemistry is known to produce HNCO as an intermediate product, and SCR systems have been implicated as an atmospheric source of HNCO. In this work, we measure HNCO emissions from an SCR system-equipped diesel engine and, in combination with earlier data, use a three-dimensional chemical transport model (CTM to simulate the ambient concentrations and source/pathway contributions to HNCO in an urban environment. Engine tests were conducted at three different engine loads, using two different fuels and at multiple operating points. HNCO was measured using an acetate chemical ionization mass spectrometer. The diesel engine was found to emit primary HNCO (3–90 mg kg fuel−1 but we did not find any evidence that the SCR system or other aftertreatment devices (i.e., oxidation catalyst and particle filter produced or enhanced HNCO emissions. The CTM predictions compared well with the only available observational datasets for HNCO in urban areas but underpredicted the contribution from secondary processes. The comparison implied that diesel-powered engines were the largest source of HNCO in urban areas. The CTM also predicted that daily-averaged concentrations of HNCO reached a maximum of ∼ 110 pptv but were an order of magnitude lower than the 1 ppbv level that could be associated with physiological effects in humans. Precursor contributions from other combustion sources (gasoline and biomass

Investigating Diesel Engines as an Atmospheric Source of Isocyanic Acid in Urban Areas

Science.gov (United States)

Farmer, D.; Jathar, S.; Heppding, C.; Link, M.; Akherati, A.; Kleeman, M.; De Gouw, J. A.; Veres, P. R.; Roberts, J. M.

2017-12-01

Isocyanic acid (HNCO), an acidic gas found in tobacco smoke, urban environments and biomass burning-affected regions, has been linked to adverse health outcomes. Gasoline- and diesel-powered engines and biomass burning are known to emit HNCO and hypothesized to emit precursors such as amides that can photochemically react to produce HNCO in the atmosphere. Increasingly, diesel engines in developed countries like the United States are required to use Selective Catalytic Reduction (SCR) systems to reduce tailpipe emissions of oxides of nitrogen. SCR chemistry is known to produce HNCO as an intermediate product, and SCR systems have been implicated as an atmospheric source of HNCO. In this work, we measure HNCO emissions from an SCR system-equipped diesel engine and, in combination with earlier data, use a three-dimensional chemical transport model (CTM) to simulate the ambient concentrations and source/pathway contributions to HNCO in an urban environment. Engine tests were conducted at three different engine loads, using two different fuels and at multiple operating points. HNCO was measured using an acetate chemical ionization mass spectrometer. The diesel engine was found to emit primary HNCO (3-90 mg kg-fuel-1) but we did not find any evidence that the SCR system or other aftertreatment devices (i.e., oxidation catalyst and particle filter) produced or enhanced HNCO emissions. The CTM predictions compared well with the only available observational data sets for HNCO in urban areas but under-predicted the contribution from secondary processes. The comparison implied that diesel-powered engines were the largest source of HNCO in urban areas. The CTM also predicted that daily-averaged concentrations of HNCO reached a maximum of 110 pptv but were an order of magnitude lower than the 1 ppbv level that could be associated with physiological effects in humans. Precursor contributions from other combustion sources (gasoline and biomass burning) and wintertime conditions

Overview of VOC emissions and chemistry from PTR-TOF-MS measurements during the SusKat-ABC campaign: high acetaldehyde, isoprene and isocyanic acid in wintertime air of the Kathmandu Valley

Directory of Open Access Journals (Sweden)

C. Sarkar

2016-03-01

( ∼  1 ppb to be among the highest reported to date. Two "new" ambient compounds, namely formamide (m ∕ z  =  46.029 and acetamide (m ∕ z  =  60.051, which can photochemically produce isocyanic acid in the atmosphere, are reported in this study along with nitromethane (a tracer for diesel exhaust, which has only recently been detected in ambient studies. Two distinct periods were selected during the campaign for detailed analysis: the first was associated with high wintertime emissions of biogenic isoprene and the second with elevated levels of ambient acetonitrile, benzene and isocyanic acid from biomass burning activities. Emissions from biomass burning and biomass co-fired brick kilns were found to be the dominant sources for compounds such as propyne, propene, benzene and propanenitrile, which correlated strongly with acetonitrile (r2 > 0.7, a chemical tracer for biomass burning. The calculated total VOC OH reactivity was dominated by acetaldehyde (24.0 %, isoprene (20.2 % and propene (18.7 %, while oxygenated VOCs and isoprene collectively contributed to more than 68 % of the total ozone production potential. Based on known secondary organic aerosol (SOA yields and measured ambient concentrations in the Kathmandu Valley, the relative SOA production potential of VOCs were benzene  >  naphthalene  >  toluene  >  xylenes  >  monoterpenes  >  trimethylbenzenes  >  styrene  >  isoprene. The first ambient measurements from any site in South Asia of compounds with significant health effects such as isocyanic acid, formamide, acetamide, naphthalene and nitromethane have been reported in this study. Our results suggest that mitigation of intense wintertime biomass burning activities, in particular point sources such biomass co-fired brick kilns, would be important to reduce the emission and formation of toxic VOCs (such as benzene and isocyanic acid in the Kathmandu Valley.

A review of syntheses of 1,5-disubstituted tetrazole derivatives.

Science.gov (United States)

Sarvary, Afshin; Maleki, Ali

2015-02-01

This report provides a brief overview of the various representative literature procedures for the synthesis of 1,5-disubstituted tetrazoles (1,5-DSTs) and fused 1,5-disubstituted tetrazoles with more than 120 references. Most of the published methods for the synthesis of 1,5-DSTs include the use of nitriles, amides, thioamides, imidoyl chlorides, heterocumulenes, isocyanates, isothiocyanates, carbodiimides, ketenimines, ketones, amines, and alkenes as the starting materials. The transformation of 1- and 5-substituted tetrazoles into 1,5-DSTs is also covered in this report.

Flexible and conductive waste tire-derived carbon/polymer composite paper as pseudocapacitive electrode

Science.gov (United States)

Naskar, Amit K.; Paranthaman, Mariappan Parans; Boota, Muhammad; Gogotsi, Yury

2018-04-10

A method of making a supercapacitor from waste tires, includes the steps of providing rubber pieces and contacting the rubber pieces with a sulfonation bath to produce sulfonated rubber; pyrolyzing the sulfonated rubber to produce a tire-derived carbon composite comprising carbon black embedded in rubber-derived carbon matrix comprising graphitized interface portions; activating the tire-derived carbon composite by contacting the tire-derived carbon composite with a specific surface area-increasing composition to increase the specific surface area of the carbon composite to provide an activated tire-derived carbon composite; and, mixing the activated tire-derived carbon composite with a monomer and polymerizing the monomer to produce a redox-active polymer coated, activated tire-derived carbon composite. The redox-active polymer coated, activated tire-derived carbon composite can be formed into a film. An electrode and a supercapacitor are also disclosed.

Composition comprising lignin and antidi arrheal component

DEFF Research Database (Denmark)

2008-01-01

The present invention relates to a composition comprising lignin and at least one compound selected from the group consisting of bromelain, papain, tannin, carvacrol, thymol, alliin, allicin, fenugreek seed, egg, poppy, poppy seeds, humic acid, roots, kaolin, catechu, cellulase, flavonoid...

Downhole transmission system comprising a coaxial capacitor

Science.gov (United States)

Hall, David R [Provo, UT; Pixton, David S [Lehi, UT; Johnson, Monte L [Orem, UT; Bartholomew, David B [Springville, UT; Hall, Jr., H. Tracy; Rawle, Michael [Springville, UT

2011-05-24

A transmission system in a downhole component comprises a plurality of data transmission elements. A coaxial cable having an inner conductor and an outer conductor is disposed within a passage in the downhole component such that at least one capacitor is disposed in the passage and having a first terminal coupled to the inner conductor and a second terminal coupled to the outer conductor. Preferably the transmission element comprises an electrically conducting coil. Preferably, within the passage a connector is adapted to electrically connect the inner conductor of the coaxial cable and the lead wire. The coaxial capacitor may be disposed between and in electrically communication with the connector and the passage. In another embodiment a connector is adapted to electrical connect a first and a second portion of the inner conductor of the coaxial cable and a coaxial capacitor is in electrical communication with the connector and the passage.

Influence of Functionalization Degree on the Rheological Properties of Isocyanate-Functionalized Chitin- and Chitosan-Based Chemical Oleogels for Lubricant Applications

Directory of Open Access Journals (Sweden)

Rocío Gallego

2014-07-01

Full Text Available This work deals with the influence of functionalization degree on the thermogravimetric and rheological behaviour of NCO-functionalized chitosan- and chitin-based oleogels. Chitosan and chitin were functionalized using different proportions of 1,6-hexamethylene diisocyanate (HMDI and subsequently dispersed in castor oil to promote the chemical reaction between the –NCO group of the modified biopolymer and the –OH group located in the ricinoleic fatty acid chain of castor oil, thus resulting in different oleogels with specific thermogravimetric and rheological characteristics. Biopolymers and oleogels were characterized through Fourier transform infrared spectroscopy (FTIR and thermogravimetric analysis (TGA. Small-amplitude oscillatory shear (SAOS measurements were performed on the oleogels. Oleogels presented suitable thermal resistance, despite the fact that the inclusion of HMDI moieties in the polymer structure led to a reduction in the onset temperature of thermal degradation. The insertion of low amounts of HMDI in both chitin and chitosan produces a drastic reduction in the values of oleogel viscoelastic functions but, above a critical threshold, they increase with the functionalization degree so that isocyanate functionalization results in a chemical tool to modulate oleogel rheological response. Several NCO-functionalized chitosan- and chitin-based oleogel formulations present suitable thermal resistance and rheological characteristics to be proposed as bio-based alternatives to traditional lubricating greases.

New mesostructured organosilica with chiral sugar derived structures: nice host for gold nanoparticles stabilisation.

Science.gov (United States)

Hérault, Damien; Cerveau, Geneviève; Corriu, Robert J P; Mehdi, Ahmad

2011-01-14

In this paper we describe the synthesis of functionalised mesoporous organosilicas containing a mannitol derivative in the framework. For this purpose, a bis-silylated precursor 3,4-Di-O-[3-(triethoxysilylpropyl)carbamate]-1,2:5,6-di-O-isopropylidene-D-mannitol was prepared by coupling of 1,2:5,6-di-O-isopropylidene-D-mannitol with 3-(triethoxysilylpropyl)isocyanate. The framework-functionalised materials were obtained in one step by the "direct synthesis" method which consists of a co-hydrolysis and polycondensation of a bis-silylated mannitol precursor with tetraethylorthosilicate (TEOS) in the presence of a non-ionic triblock co-polymer (P123) as structure-directing agent. Interestingly, deprotection of the 1,2,5,6 OH functional groups occurred during the material synthesis. The obtained solids were characterized by (13)C and (29)Si CP-MAS NMR, N(2) adsorption-desorption, powder X-ray diffraction, TEM and elemental analysis. We have shown that, the OH functional groups, which are released during the synthesis of the mesoporous silica, can be used for chelation of ions and stabilisation of nanoparticles. The subsequent growth of gold (0) nanoparticles in the wall has been investigated and evidenced.

Kinetic analysis of overlapping multistep thermal decomposition comprising exothermic and endothermic processes: thermolysis of ammonium dinitramide.

Science.gov (United States)

Muravyev, Nikita V; Koga, Nobuyoshi; Meerov, Dmitry B; Pivkina, Alla N

2017-01-25

This study focused on kinetic modeling of a specific type of multistep heterogeneous reaction comprising exothermic and endothermic reaction steps, as exemplified by the practical kinetic analysis of the experimental kinetic curves for the thermal decomposition of molten ammonium dinitramide (ADN). It is known that the thermal decomposition of ADN occurs as a consecutive two step mass-loss process comprising the decomposition of ADN and subsequent evaporation/decomposition of in situ generated ammonium nitrate. These reaction steps provide exothermic and endothermic contributions, respectively, to the overall thermal effect. The overall reaction process was deconvoluted into two reaction steps using simultaneously recorded thermogravimetry and differential scanning calorimetry (TG-DSC) curves by considering the different physical meanings of the kinetic data derived from TG and DSC by P value analysis. The kinetic data thus separated into exothermic and endothermic reaction steps were kinetically characterized using kinetic computation methods including isoconversional method, combined kinetic analysis, and master plot method. The overall kinetic behavior was reproduced as the sum of the kinetic equations for each reaction step considering the contributions to the rate data derived from TG and DSC. During reproduction of the kinetic behavior, the kinetic parameters and contributions of each reaction step were optimized using kinetic deconvolution analysis. As a result, the thermal decomposition of ADN was successfully modeled as partially overlapping exothermic and endothermic reaction steps. The logic of the kinetic modeling was critically examined, and the practical usefulness of phenomenological modeling for the thermal decomposition of ADN was illustrated to demonstrate the validity of the methodology and its applicability to similar complex reaction processes.

Electrode material comprising graphene-composite materials in a graphite network

Science.gov (United States)

Kung, Harold H.; Lee, Jung K.

2017-08-08

A durable electrode material suitable for use in Li ion batteries is provided. The material is comprised of a continuous network of graphite regions integrated with, and in good electrical contact with a composite comprising graphene sheets and an electrically active material, such as silicon, wherein the electrically active material is dispersed between, and supported by, the graphene sheets.

Zinc comprising coordination compounds as growth stimulants of cotton seeds

International Nuclear Information System (INIS)

Yusupov, Z.N.; Nurmatov, T.M.; Rakhimova, M.M.; Dzhafarov, M.I.; Nikolaeva, T.B.

1991-01-01

Present article is devoted to zinc comprising coordination compounds as growth stimulants of cotton seeds. The influence of zinc coordination compounds with physiologically active ligands on germinative energy and seed germination of cotton was studied. The biogical activity and effectiveness of zinc comprising coordination compounds at application them for humidification of cotton seeds was studied as well.

Study of the catalytic selectivity of an aqueous two-component polyurethane system by ftir spectroscopy

Directory of Open Access Journals (Sweden)

Stamenković Jakov V.

2003-01-01

Full Text Available The difficulty in formulating a two component waterborne polyurethane, is the isocyanate-water side reaction, which can lead to gassing/foaming, loss of isocyanate functionality, low gloss and a reduced pot life. To compensate for this side reaction, these formulations usually contain a large excess of isocyanate. Tin compounds, especially dibutyltin dilaurate, are widely used in coatings as catalysts for the isocyanate/hydroxyl reaction. Because of the high aquatic toxicity of some organotin compounds, there has been an attempt to ban organotin compounds from all coating applications. As a general rule, organotin catalysts are not selective, they catalyze the reaction of isocyanates with both hydroxyl groups and water and also catalyze the hydrolysis of ester groups. One novel approach to control the water side reaction is the use of catalysts which selectively catalyze the isocyanate-polyol reaction and not the isocyanate-water reaction. The selectivity of a variety of metal catalysts (metal octoates, metal acetylacetonates and mangan chelates with mixed ligands to catalyze the preferred reaction was measured using the FTIR method.

Resonant power converter comprising adaptive dead-time control

DEFF Research Database (Denmark)

2017-01-01

The invention relates in a first aspect to a resonant power converter comprising: a first power supply rail for receipt of a positive DC supply voltage and a second power supply rail for receipt of a negative DC supply voltage. The resonant power converter comprises a resonant network with an input...... terminal for receipt of a resonant input voltage from a driver circuit. The driver circuit is configured for alternatingly pulling the resonant input voltage towards the positive and negative DC supply voltages via first and second semiconductor switches, respectively, separated by intervening dead......-time periods in accordance with one or more driver control signals. A dead-time controller is configured to adaptively adjusting the dead-time periods based on the resonant input voltage....

Synthesis and Bioactivity of N-Benzoyl-N'-[5-(2'-substituted phenyl-2-furoyl] Semicarbazide Derivatives

Directory of Open Access Journals (Sweden)

Zining Cui

2010-06-01

Full Text Available In order to find novel chitin synthesis inhibitors (CSIs with good activity, benzoylphenylurea, a typical kind of CSIs, was chosen as the lead compound and 15 novel derivatives containing furan moieties were designed by converting the urea linkage of benzoylphenylureas into a semicarbazide and changing the aniline part into furoyl groups. The title compounds were synthesized by the reaction of substituted benzoyl isocyanates with 5-(substituted phenyl-2-furoyl hydrazine, and the structures were confirmed by IR, 1H-NMR, elemental analysis and single crystal X-ray diffraction analyses (compound E2. The bioassay results indicated that the title compounds exhibit good insecticidal activity, especially towards Plutella xylostella L., but had lower fungicidal activity. Inspiringly, the title compounds possessed obvious anticancer activity against human promyelocytic leukemic cell line (HL-60, and some of the title compounds also had activity against human hepatocellular carcinoma cell line (Bel-7402, human gastric carcinoma cell line (BGC-823, and human nasopharyngeal carcinoma cell line (KB. The results indicated that the linkage in the lead compounds was important to the bioactivity and spectra. The modification on the urea linkage is an effective strategy to discover new pesticide and drug candidates.

Thermoacoustic refrigerators and engines comprising cascading stirling thermodynamic units

Science.gov (United States)

Backhaus, Scott; Swift, Greg

2013-06-25

The present invention includes a thermoacoustic assembly and method for improved efficiency. The assembly has a first stage Stirling thermal unit comprising a main ambient heat exchanger, a regenerator and at least one additional heat exchanger. The first stage Stirling thermal unit is serially coupled to a first end of a quarter wavelength long coupling tube. A second stage Stirling thermal unit comprising a main ambient heat exchanger, a regenerator, and at least one additional heat exchanger, is serially coupled to a second end of the quarter wavelength long coupling tube.

Biocatalytic material comprising multilayer enzyme coated fiber

Science.gov (United States)

Kim, Jungbae [Richland, WA; Kwak, Ja Hun [Richland, WA; Grate, Jay W [West Richland, WA

2009-11-03

The present invention relates generally to high stability, high activity biocatalytic materials and processes for using the same. The materials comprise enzyme aggregate coatings having high biocatalytic activity and stability useful in heterogeneous environment. These new materials provide a new biocatalytic immobilized enzyme system with applications in bioconversion, bioremediation, biosensors, and biofuel cells.

Synthesis, Central Nervous System Activity and Structure-Activity Relationships of Novel 1-(1-Alkyl-4-aryl-4,5-dihydro-1H-imidazo-3-substituted Urea Derivatives

Directory of Open Access Journals (Sweden)

Elżbieta Szacoń

2015-02-01

Full Text Available A series of 10 novel urea derivatives has been synthesized and evaluated for their central nervous system activity. Compounds 3a–3h were prepared in the reaction between the respective 1-alkyl-4-aryl-4,5-dihydro-1H-imidazol-2-amines 1a and 1b and appropriate benzyl-, phenethyl-isocyanate or ethyl 4-isocyanatobenzoate and ethyl isocyanatoacetate 2 in dichloromethane. Derivatives 4c and 4g resulted from the conversion of 3c and 3g into the respective amides due to action of an aqueous ammonia solution. The results obtained in this study, based on literature data suggest a possible involvement of serotonin system and/or the opioid system in the effects of tested compounds, and especially in the effect of compound 3h. The best activity of compound 3h may be primarily attributed to its favourable ADMET properties, i.e., higher lipophilicity (related to lower polar surface area and greater molecular surface, volume and mass than for other compounds and good blood-brain permeation. This compound has also the greatest polarizability and ovality. The HOMO and LUMO energies do not seem to be directly related to activity.

Protic Cationic Oligomeric Ionic Liquids of the Urethane Type

DEFF Research Database (Denmark)

Shevchenko, V. V.; Stryutsky, A. V.; Klymenko, N. S.

2014-01-01

Protic oligomeric cationic ionic liquids of the oligo(ether urethane) type are synthesized via the reaction of an isocyanate prepolymer based on oligo(oxy ethylene)glycol with M = 1000 with hexamethylene-diisocyanate followed by blocking of the terminal isocyanate groups with the use of amine...... derivatives of imidazole, pyridine, and 3-methylpyridine and neutralization of heterocycles with ethanesulfonic acid and p-toluenesulfonic acid. The structures and properties of the synthesized oligomeric ionic liquids substantially depend on the structures of the ionic groups. They are amorphous at room...... temperature, but ethanesulfonate imidazolium and pyridinium oligomeric ionic liquids form a low melting crystalline phase. The proton conductivities of the oligomeric ionic liquids are determined by the type of cation in the temperature range 80-120 degrees C under anhydrous conditions and vary within five...

Sol-gel derived sorbents

Science.gov (United States)

Sigman, Michael E.; Dindal, Amy B.

2003-11-11

Described is a method for producing copolymerized sol-gel derived sorbent particles for the production of copolymerized sol-gel derived sorbent material. The method for producing copolymerized sol-gel derived sorbent particles comprises adding a basic solution to an aqueous metal alkoxide mixture for a pH.ltoreq.8 to hydrolyze the metal alkoxides. Then, allowing the mixture to react at room temperature for a precalculated period of time for the mixture to undergo an increased in viscosity to obtain a desired pore size and surface area. The copolymerized mixture is then added to an immiscible, nonpolar solvent that has been heated to a sufficient temperature wherein the copolymerized mixture forms a solid upon the addition. The solid is recovered from the mixture, and is ready for use in an active sampling trap or activated for use in a passive sampling trap.

Additive manufacturing of short and mixed fibre-reinforced polymer

Science.gov (United States)

Lewicki, James; Duoss, Eric B.; Rodriguez, Jennifer Nicole; Worsley, Marcus A.; King, Michael J.

2018-01-09

Additive manufacturing of a fiber-reinforced polymer (FRP) product using an additive manufacturing print head; a reservoir in the additive manufacturing print head; short carbon fibers in the reservoir, wherein the short carbon fibers are randomly aligned in the reservoir; an acrylate, methacrylate, epoxy, cyanate ester or isocyanate resin in the reservoir, wherein the short carbon fibers are dispersed in the acrylate, methacrylate, epoxy, cyanate ester or isocyanate resin; a tapered nozzle in the additive manufacturing print head operatively connected to the reservoir, the tapered nozzle produces an extruded material that forms the fiber-reinforced polymer product; baffles in the tapered nozzle that receive the acrylate, methacrylate, epoxy, cyanate ester or isocyanate resin with the short carbon fibers dispersed in the acrylate, methacrylate, epoxy, cyanate ester or isocyanate resin; and a system for driving the acrylate, methacrylate, epoxy, cyanate ester or isocyanate resin with the short carbon fibers dispersed in the acrylate, methacrylate, epoxy, cyanate ester or isocyanate resin from the reservoir through the tapered nozzle wherein the randomly aligned short carbon fibers in the acrylate, methacrylate, epoxy, cyanate ester or isocyanate resin are aligned by the baffles and wherein the extruded material has the short carbon fibers aligned in the acrylate, methacrylate, epoxy, cyanate ester or isocyanate resin that forms the fiber-reinforced polymer product.

Foam patterns

Science.gov (United States)

Chaudhry, Anil R; Dzugan, Robert; Harrington, Richard M; Neece, Faurice D; Singh, Nipendra P; Westendorf, Travis

2013-11-26

A method of creating a foam pattern comprises mixing a polyol component and an isocyanate component to form a liquid mixture. The method further comprises placing a temporary core having a shape corresponding to a desired internal feature in a cavity of a mold and inserting the mixture into the cavity of the mold so that the mixture surrounds a portion of the temporary core. The method optionally further comprises using supporting pins made of foam to support the core in the mold cavity, with such pins becoming integral part of the pattern material simplifying subsequent processing. The method further comprises waiting for a predetermined time sufficient for a reaction from the mixture to form a foam pattern structure corresponding to the cavity of the mold, wherein the foam pattern structure encloses a portion of the temporary core and removing the temporary core from the pattern independent of chemical leaching.

Metal-polymer composites comprising nanostructures and applications thereof

Science.gov (United States)

Wang, Hsing-Lin [Los Alamos, NM; Jeon, Sea Ho [Dracut, MA; Mack, Nathan H [Los Alamos, NM

2011-08-02

Metal-polymer composites, and methods of making and use thereof, said composites comprising a thermally-cured dense polyaniline substrate; an acid dopant; and, metal nanostructure deposits wherein the deposits have a morphology dependent upon the acid dopant.

Non-cementitious compositions comprising vaterite and methods thereof

Science.gov (United States)

Devenney, Martin; Fernandez, Miguel; Morgan, Samuel O.

2015-09-15

Non-cementitious compositions and products are provided. The compositions of the invention include a carbonate additive comprising vaterite such as reactive vaterite. Additional aspects of the invention include methods of making and using the non-cementitious compositions and products.

Pneumatic stepper motor and device comprising at least one such pneumatic stepper motor

NARCIS (Netherlands)

Groenhuis, Vincent; Siepel, Françoise Jeanette; Stramigioli, Stefano

2018-01-01

The invention relates to a pneumatic stepper motor, comprising: - a housing, said housing accommodating at least part of: - a rack or geared axle comprising a plurality of gear elements; and - two pistons, each comprising at least two teeth, said pistons being arranged to cooperate with said rack or

Compositions comprising enhanced graphene oxide structures and related methods

Science.gov (United States)

Kumar, Priyank Vijaya; Bardhan, Neelkanth M.; Belcher, Angela; Grossman, Jeffrey

2016-12-27

Embodiments described herein generally relate to compositions comprising a graphene oxide species. In some embodiments, the compositions advantageously have relatively high oxygen content, even after annealing.

Site-selective modification of cellulose nanocrystals with isophorone diisocyanate and formation of polyurethane-CNC composites

Science.gov (United States)

Natalie M. Girouard; Shanhong Xu; Gregory T. Schueneman; Meisha L. Shofner; J. Carson. Meredith

2016-01-01

The unequal reactivity of the two isocyanate groups in an isophorone diisocyante (IPDI) monomer was exploited to yield modified cellulose nanocrystals (CNCs) with both urethane and isocyanate functionality. The chemical functionality of the modified CNCs was verified with ATR-FTIR analysis and elemental analysis. The selectivity for the secondary isocyanate group using...

Actinic radiation-curable formulations from the reaction product of organic isocyanate, poly(alkylene oxide) polyol and an unsaturated addition-polymerizable monomeric compound having a single isocyanate-reactive hydrogen group

International Nuclear Information System (INIS)

Howard, D.D.

1979-01-01

Energy-curable compositions which can be cured in the presence of air by exposure to actinic radiation contain at least one unsaturated urethane oligomer. The oligomer comprises the reaction product of at least one poly(alkylene oxide) polyol, at least one polyisocyanate, and at least one unsaturated active hydrogen-containing compound

Tritium labelled steroids, preparation process and application to synthesis of tritium labelled estrane derivatives

International Nuclear Information System (INIS)

1978-01-01

Process for preparing new steroids labelled with tritium in 6.7 and comprising in 3 a blocked ketonic group as ketal, thioketal or derivatives. Application of these products to the synthesis of tritium labelled estrane derivatives [fr

Functional Analysis of Genes Comprising the Locus of Heat Resistance in Escherichia coli.

Science.gov (United States)

Mercer, Ryan; Nguyen, Oanh; Ou, Qixing; McMullen, Lynn; Gänzle, Michael G

2017-10-15

The locus of heat resistance (LHR) is a 15- to 19-kb genomic island conferring exceptional heat resistance to organisms in the family Enterobacteriaceae , including pathogenic strains of Salmonella enterica and Escherichia coli The complement of LHR-comprising genes that is necessary for heat resistance and the stress-induced or growth-phase-induced expression of LHR-comprising genes are unknown. This study determined the contribution of the seven LHR-comprising genes yfdX1 GI , yfdX2 , hdeD GI , orf11 , trx GI , kefB , and psiE GI by comparing the heat resistances of E. coli strains harboring plasmid-encoded derivatives of the different LHRs in these genes. (Genes carry a subscript "GI" [genomic island] if an ortholog of the same gene is present in genomes of E. coli ) LHR-encoded heat shock proteins sHSP20, ClpK GI , and sHSP GI are not sufficient for the heat resistance phenotype; YfdX1, YfdX2, and HdeD are necessary to complement the LHR heat shock proteins and to impart a high level of resistance. Deletion of trx GI , kefB , and psiE GI from plasmid-encoded copies of the LHR did not significantly affect heat resistance. The effect of the growth phase and the NaCl concentration on expression from the putative LHR promoter p2 was determined by quantitative reverse transcription-PCR and by a plasmid-encoded p2:GFP promoter fusion. The expression levels of exponential- and stationary-phase E. coli cells were not significantly different, but the addition of 1% NaCl significantly increased LHR expression. Remarkably, LHR expression in E. coli was dependent on a chromosomal copy of evgA In conclusion, this study improved our understanding of the genes required for exceptional heat resistance in E. coli and factors that increase their expression in food. IMPORTANCE The locus of heat resistance (LHR) is a genomic island conferring exceptional heat resistance to several foodborne pathogens. The exceptional level of heat resistance provided by the LHR questions the

Crystal structures and DFT calculations of mixed chloride-azide zinc(II) and chloride-isocyanate cadmium(II) complexes with the condensation product of 2-quinolinecarboxaldehyde and Girard's T reagent

Science.gov (United States)

Anđelković, Katarina; Pevec, Andrej; Grubišić, Sonja; Turel, Iztok; Čobeljić, Božidar; Milenković, Milica R.; Keškić, Tanja; Radanović, Dušanka

2018-06-01

The mixed chloride-azide [ZnL(N3)1.65Cl0.35] (1) and chloride-isocyanate [CdL(NCO)1.64Cl0.36] (2) complexes with the condensation product of 2-quinolinecarboxaldehyde and trimethylammonium acetohydrazide chloride (Girard's T reagent) (HLCl) have been prepared and characterized by X-ray crystallography. In complexes 1 and 2, Zn1 and Cd1 ions, respectively, are five-coordinated in a distorted square based pyramidal geometry with NNO set of donor atoms of deprotonated hydrazone ligand and two monodentate ligands N3- and/or N3- and Cl- in the case of 1 and OCN- and/or OCN- and Cl- in the case of 2. The structural parameters of 1 and 2 have been discussed in relation to those of previously reported M(II) complexes with the same hydrazone ligand. Density functional theory calculations have been employed to study the interaction between the Zn2+ and Cd2+ ions and ligands. High affinity of ligands towards the Zn2+ and Cd2+ ions are predicted for both complexes.

Fibrous composites comprising carbon nanotubes and silica

Science.gov (United States)

Peng, Huisheng [Shanghai, CN; Zhu, Yuntian Theodore [Cary, NC; Peterson, Dean E [Los Alamos, NM; Jia, Quanxi [Los Alamos, NM

2011-10-11

Fibrous composite comprising a plurality of carbon nanotubes; and a silica-containing moiety having one of the structures: (SiO).sub.3Si--(CH.sub.2).sub.n--NR.sub.1R.sub.2) or (SiO).sub.3Si--(CH.sub.2).sub.n--NCO; where n is from 1 to 6, and R.sub.1 and R.sub.2 are each independently H, CH.sub.3, or C.sub.2H.sub.5.

Nanophosphor composite scintillators comprising a polymer matrix

Science.gov (United States)

Muenchausen, Ross Edward; Mckigney, Edward Allen; Gilbertson, Robert David

2010-11-16

An improved nanophosphor composite comprises surface modified nanophosphor particles in a solid matrix. The nanophosphor particle surface is modified with an organic ligand, or by covalently bonding a polymeric or polymeric precursor material. The surface modified nanophosphor particle is essentially charge neutral, thereby preventing agglomeration of the nanophosphor particles during formation of the composite material. The improved nanophosphor composite may be used in any conventional scintillator application, including in a radiation detector.

Isocyanic acid in a global chemistry transport model: Tropospheric distribution, budget, and identification of regions with potential health impacts

Science.gov (United States)

Young, Paul. J.; Emmons, Louisa K.; Roberts, James M.; Lamarque, Jean-FrançOis; Wiedinmyer, Christine; Veres, Patrick; Vandenboer, Trevor C.

2012-05-01

This study uses a global chemical transport model to estimate the distribution of isocyanic acid (HNCO). HNCO is toxic, and concentrations exceeding 1 ppbv have been suggested to have negative health effects. Based on fire studies, HNCO emissions were scaled to those of hydrogen cyanide (30%), resulting in yearly total emissions of 1.5 Tg for 2008, from both anthropogenic and biomass burning sources. Loss processes included heterogeneous uptake (pH dependent), dry deposition (like formic acid), and reaction with the OH radical (k = 1 × 10-15 molecule-1 cm3 s-1). Annual mean surface HNCO concentrations were highest over parts of China (maximum of 470 pptv), but episodic fire emissions gave much higher levels, exceeding 4 ppbv in tropical Africa and the Amazon, and exceeding 10 ppbv in Southeast Asia and Siberia. This suggests that large biomass burning events could result in deleterious health effects for populations in these regions. For the tropospheric budget, using the model-calculated pH the HNCO lifetime was 37 days, with the split between dry deposition and heterogeneous loss being 95%:5%. Fixing the heterogeneous loss rate at pH = 7 meant that this process dominated, accounting for ˜70% of the total loss, giving a lifetime of 6 days, and resulting in upper tropospheric concentrations that were essentially zero. However, changing the pH does not notably impact the high concentrations found in biomass burning regions. More observational data is needed to evaluate the model, as well as a better representation of the likely underestimated biofuel emissions, which could mean more populations exposed to elevated HNCO concentrations.

Thermal emitter comprising near-zero permittivity materials

Science.gov (United States)

Luk, Ting S.; Campione, Salvatore; Sinclair, Michael B.

2017-10-25

A novel thermal source comprising a semiconductor hyperbolic metamaterial provides control of the emission spectrum and the angular emission pattern. These properties arise because of epsilon-near-zero conditions in the semiconductor hyperbolic metamaterial. In particular, the thermal emission is dominated by the epsilon-near-zero effect in the doped quantum wells composing the semiconductor hyperbolic metamaterial. Furthermore, different properties are observed for s and p polarizations, following the characteristics of the strong anisotropy of hyperbolic metamaterials.

Photovoltaic device comprising compositionally graded intrinsic photoactive layer

Science.gov (United States)

Hoffbauer, Mark A; Williamson, Todd L

2013-04-30

Photovoltaic devices and methods of making photovoltaic devices comprising at least one compositionally graded photoactive layer, said method comprising providing a substrate; growing onto the substrate a uniform intrinsic photoactive layer having one surface disposed upon the substrate and an opposing second surface, said intrinsic photoactive layer consisting essentially of In.sub.1-xA.sub.xN,; wherein: i. 0.ltoreq.x.ltoreq.1; ii. A is gallium, aluminum, or combinations thereof; and iii. x is at least 0 on one surface of the intrinsic photoactive layer and is compositionally graded throughout the layer to reach a value of 1 or less on the opposing second surface of the layer; wherein said intrinsic photoactive layer is isothermally grown by means of energetic neutral atom beam lithography and epitaxy at a temperature of 600.degree. C. or less using neutral nitrogen atoms having a kinetic energy of from about 1.0 eV to about 5.0 eV, and wherein the intrinsic photoactive layer is grown at a rate of from about 5 nm/min to about 100 nm/min.

COUPLING OF LIPOPOLYSACCHARIDE-DERIVED CARBOHYDRATES ONTO SOLID SURFACES

DEFF Research Database (Denmark)

2000-01-01

The present invention provides a method for immobilising a polysaccharide (PS) to a solid surface, said polysaccharide having a keto-carboxy group (-C(=O)-COOH) or a ketal or hemiketal group corresponding thereto, e.g. derived from KDO (2-keto-3-deoxy-D-mannooctonic acid), the method comprising t...

Synthesis of novel ionic liquids from lignin-derived compounds

Science.gov (United States)

Socha, Aaron; Singh, Seema; Simmons, Blake A.; Bergeron, Maxime

2017-09-19

Methods and compositions are provided for synthesizing ionic liquids from lignin derived compounds comprising: contacting a starting material comprising lignin with a depolymerization agent to depolymerize the lignin and form a mixture of aldehyde containing compounds; contacting the mixture of aldehyde containing compounds with an amine under conditions suitable to convert the mixture of aldehyde containing compounds to a mixture of amine containing compounds; and contacting the mixture of amine containing compounds with an acid under conditions suitable to form an ammonium salt, thereby preparing the ionic liquid.

Solid radiation curable polyene compositions containing liquid polythiols and solid styrene-allyl copolymer based polyenes

International Nuclear Information System (INIS)

Morgan, C.R.

1977-01-01

Novel styrene-allyl alcohol copolymer based solid polyene compositions which when mixed with liquid polythiols can form solid curable polyene-polythiol systems are claimed. These solid polyenes, containing at least two reactive carbon-to-carbon unsaturated bonds, are urethane or ester derivatives of styrene-allyl alcohol copolymers. The solid polyenes are prepared by treating the hydroxyl groups of a styrene-allyl alcohol copolymer with a reactive unsaturated isocyanate, e.g., allyl isocyanate or a reactive unsaturated carboxylic acid, e.g., acrylic acid. Upon exposure to a free radical generator, e.g., actinic radiation, the solid polyene-polythiol compositions cure to solid, insoluble, chemically resistant, cross-linked polythioether products. Since the solid polyene-liquid polythiol composition can be cured in a solid state, such a curable system finds particular use in preparation of coatings, imaged surfaces such as photoresists, particularly solder-resistant photoresists, printing plates, etc

The obtaining of iron acetate from processed iron comprising catalyst of ammonia synthesis

International Nuclear Information System (INIS)

Mansurov, M.M.; Lugovenko, A.N.; Mirzoeva, M.M.

1993-01-01

Present article is devoted to obtaining of iron acetate from processed iron comprising catalyst of ammonia synthesis. The method of synthesis of iron acetate from processed iron comprising catalyst of ammonia synthesis was elaborated. The structure of complex was determined.

Exploring the learnings derived from catalytic experiences in a leadership context

OpenAIRE

Daphna S. Horowitz; René van Eeden

2015-01-01

Orientation: Personal leadership comprises self-awareness, authenticity, inspiration and passion. The concept of personal leadership was explored together with its relationship with leadership-related learnings derived from a catalytic experience. Research purpose: The objective of the study was to explore the leadership-related learnings derived from a catalytic experience and any connection between these learnings, personal leadership and leadership in an organisational context. Mot...

Synthesis and biological activity of novel series of 4-methoxy, and 4,9-dimethoxy-5-substituted furo[2,3-g]-1,2,3-benzoxathiazine-7,7-dioxide derivatives.

Science.gov (United States)

El-Sawy, Eslam R; Ebaid, Manal S; Abo-Salem, Heba M; El-Hallouty, Salwa; Kassem, Emad M; Mandour, Adel H

2014-05-01

A novel series of 4-methoxy, and 4,9-dimethoxy-5-substituted furo[2,3-g]-1,2,3-benzoxathiazine-7,7-dioxide derivatives 3a,b, 10a-g and 11a-g were prepared in good yields via the reaction of 4-methoxy (1a) and 4,7-dimethoxy-5-acetyl-6-hydroxybenzofurans (1b) and their α,β-unsaturated keto derivatives 6a-g and 7a-g with chlorosulfonyl isocyanate (CSI). On the other hand, N-chlorosulfonyl carbamate derivatives 4a,b, 12a,b and 13a,b were prepared and allowed to react with piperidine to give the corresponding N-piperidinosulfonyl carbamate derivatives 5a,b, 14a,b and 15a,b, respectively. Sixteen new target compounds 3a,b, 10a-g, and 11a-g were tested for their DPPH radical-scavenging, and in vitro antiproliferative activity against A-549, MCF7 and HCT-116 cancer cell lines. Compounds 10a, 11c, 11e, and 11g showed moderate DPPH radical-scavenging activity compared to ascorbic acid at 100 μg/mL. 4,9-Dimethoxy-5-substituted styrylfuro[3,2-g]-1,2,3-benzoxathiazine-7,7-dioxides 11a, 11b, and 11c were found to be highly active against A-549 and HCT-116 cancer cell lines with IC50 values ranging from 0.02 to 0.08 μmol/mL compared to doxorubicin with IC50 = 0.04 and 0.06 μmol/mL, respectively.

DC-to-DC converter comprising a reconfigurable capacitor unit

NARCIS (Netherlands)

2008-01-01

The present invention relates to a configurable trench multi-capacitor device comprising a trench in a semiconductor substrate. The trench has a lateral extension exceeding 10 micrometer and a trench filling includes a number of at least four electrically conductive capacitor-electrode layers. A

DC-to-DC converter comprising a reconfigurable capacitor unit

NARCIS (Netherlands)

Klootwijk, J.H.; Bergveld, H.J.; Roozeboom, F.; Reefman, D.; Ruigrok, J.

2013-01-01

The present invention relates to a configurable trench multi-capacitor device comprising a trench in a semiconductor substrate. The trench has a lateral extension exceeding 10 micrometer and a trench filling includes a number of at least four electrically conductive capacitor-electrode layers. A

Derivation of the extended elastic stiffness formula of the holddown spring assembly comprised of several leaves

International Nuclear Information System (INIS)

Song, Kee Nam; Kang, H. S.; Yoon, K. H.

1999-01-01

Based on the Euler beam theory and the elastic strain energy method, the elastic stiffness formula of the holddown spring assembly consisting of several leaves was previously derived. Even though the previous formula was known to be useful to estimate the elastic stiffness of the holddown spring assembly, recently it was reported that the elastic stiffness from the previous formula deviated greatly from the test results as the number of leaves was increased. The objective of this study is to extend the previous formula in order to resolve such an increasing deviation when increasing the number of leaves. Additionally, considering the friction forces acting on the interfaces between the leaves, we obtained an extended elastic stiffness formula. The characteristic test and the elastic stiffness analysis on the various kinds of specimens of the holddown spring assembly have been carried out; the validity of the extended formula has been verified by the comparison of their results. As a result of comparisons, it is found that the extended formula is able to evaluate the elastic stiffness of the holddown spring assembly within the maximum error range of +12%, irrespective of the number of the leaves. (author). 9 refs., 5 figs., 1 tab

Synthesis and Antibacterial Activities of New Metronidazole and Imidazole Derivatives

Directory of Open Access Journals (Sweden)

Abdul Jabar Kh. Atia

2009-07-01

Full Text Available New imidazole ring derivatives comprising 1,3-oxazoline, Schiff's bases, thiadiazole, oxadiazole and 1,2,4-triazole moieties are reported. 3-Aminobiimidazol-4-one compounds 7a-c were synthesized by the reaction of compounds 6a-c with hydrazine hydrate. Biimidazole esters 9a-c were converted into biimidazole hydrazide esters 10a-c. Compounds 7a-c and 10a-c were converted into a variety of derivatives.

Liquid, urea group-containing polyisocyanate mixtures and plastics derived therefrom

Energy Technology Data Exchange (ETDEWEB)

Buethe, I.; Marx, M.; Schoenleben, W.

1988-04-05

The invention relates to urea group-containing polyisocyanate mixtures which are liquid at room temperature and have an isocyanate group content of from 15 to 30 weight percent and a diphenylmethane diisocyanate content of from 55 to 90 weight percent. These mixtures are obtained through the reaction of polyoxyalkylene polyamines having a functionality of from 2 to 5 and an amine number from 20 to 250 with a polyisocyanate selected from the group consisting of: a mixture of diphenylmethane diisocyanates and polyphenyl polymethylene polysocyanates having a diphenylmethane diisocyanate content of from 55 to 90 wt%, or at least one diphenylmethane diisocyanate isomer. The polyisocyanate mixtures claimed in the invention are used to prepare dense or cellular polyurethane and/or polyisocyanurate plastics, in particular, flexible polyurethane foams.

Airborne thermal degradation products of polyurethene coatings in car repair shops.

Science.gov (United States)

Karlsson, D; Spanne, M; Dalene, M; Skarping, G

2000-10-01

A methodology for workplace air monitoring of aromatic and aliphatic, mono- and polyisocyanates by derivatisation with di-n-butylamine (DBA) is presented. Air sampling was performed using midget impinger flasks containing 10 ml of 0.01 mol l(-1) DBA in toluene and a glass-fibre filter in series after the impinger flask, thereby providing the possibility of collecting and derivatising isocyanates in both the gas and particle phases. Quantification was made by LC-MS, monitoring the molecular ions [MH]+. Air samples taken with this method in car repair shops showed that many different isocyanates are formed during thermal decomposition of polyurethane (PUR) coatings. In addition to isocyanates such as hexamethylene (HDI), isophorone (IPDI), toluene (TDI) and methylenediphenyl diisocyanate (MDI), monoisocyanates such as methyl (MIC), ethyl (EIC), propyl (PIC), butyl (BIC) and phenyl isocyanate (PhI) were found. In many air samples the aliphatic monoisocyanates dominated. During cutting and welding operations, the highest levels of isocyanates were observed. In a single air sample from a welding operation in a car repair shop, the highest concentrations found were: MIC, 290; EIC, 60; PIC, 20; BIC, 9; PhI, 27; HDI, 105; IPDI, 39; MDI, 4; and 2,4-TDI and 2,6-TDI 140 microg m(-3). Monitoring the particle size distribution and concentration during grinding, welding and cutting operations showed that ultrafine particles (< 0.1 microm) were formed at high concentrations. Isocyanates with low volatility were mainly found in the particle phase, but isocyanates with a relatively high volatility such as TDI, were found in both the particle and gas phases.

SYNTHESIS AND CHARACTERIZATION OF BIO-BASED POLYESTER POLYOL

Directory of Open Access Journals (Sweden)

MİTHAT ÇELEBİ

2016-11-01

Full Text Available Polyurethanes are versatile polymeric materials and are usually synthesised by isocyanate reactions with polyols. Due to the variety of isocyanates and polyols, particularly polyols, polyurethanes can be easily tailored for wide applications, such as rigid and flexible foams, coatings, adhesives, and elastomers. Considerable efforts have been recently devoted to developing bio-based substitutes for petroleum-based polyuretahanes due to increasing concerns over the depletion of petroleum resources, environment, and sustainability. Polyester polyols based on aliphatic and aromatic dicarboxylic acids are one of the most important materials in polymer technologies. Large volume of plants oils are used as renewable resources to produce various chemicals which are industrially important to make soaps, cosmetic products, surfactants, lubricants, diluents, plasticizers, inks, agrochemicals, composite materials, food industry. This study introduces synthesis and properties of bio-based polyols from different renewable feedstocks including vegetable oils and derivatives. A comparison of bio-based polyol properties with their petroleum-based analogues were investigated.

LDRD final report on "Pumping up CO2 and conversion into useful molecules" (LDRD 105932).

Energy Technology Data Exchange (ETDEWEB)

Kemp, Richard Alan; Stewart, Constantine A.; Dickie, Diane A. (University of New Mexico, Albuquerque, NM)

2009-11-01

Group 12 metal cyclam complexes and their derivatives as well as (octyl){sub 2}Sn(OMe){sub 2} were examined as potential catalysts for the production of dimethyl carbonate (DMC) using CO{sub 2} and methanol. The zinc cyclams will readily take up carbon dioxide and methanol at room temperature and atmospheric pressure to give the metal methyl carbonate. The tin exhibited an improvement in DMC yields. Studies involving the reaction of bis-phosphino- and (phosphino)(silyl)-amido group 2 and 12 complexes with CO{sub 2} and CS{sub 2} were performed. Notable results include formation of phosphino-substituted isocyanates, fixation of three moles of CO{sub 2} in an unprecedented [N(CO{sub 2}){sub 3}]{sup 3-} anion, and rapid splitting of CS{sub 2} by main group elements under extremely mild conditions. Similar investigations of divalent group 14 silyl amides led to room temperature splitting of CO{sub 2} into CO and metal oxide clusters, and the formation of isocyanates and carbodiimides.

Immunogenic compositions comprising human immunodeficiency virus (HIV) mosaic Nef proteins

Science.gov (United States)

Korber, Bette T [Los Alamos, NM; Perkins, Simon [Los Alamos, NM; Bhattacharya, Tanmoy [Los Alamos, NM; Fischer, William M [Los Alamos, NM; Theiler, James [Los Alamos, NM; Letvin, Norman [Boston, MA; Haynes, Barton F [Durham, NC; Hahn, Beatrice H [Birmingham, AL; Yusim, Karina [Los Alamos, NM; Kuiken, Carla [Los Alamos, NM

2012-02-21

The present invention relates to mosaic clade M HIV-1 Nef polypeptides and to compositions comprising same. The polypeptides of the invention are suitable for use in inducing an immune response to HIV-1 in a human.

Isocyanate-functionalized castor oil as a novel bitumen modifier

OpenAIRE

Cuadri Vega, Antonio Abad; García Morales, Moisés; Navarro Domínguez, Francisco Javier; Partal López, Pedro

2013-01-01

The use of biomaterials from renewable sources in the synthesis of polyurethane-derived polymers is lately receiving great attention from social, environmental and economic standpoints. In this work, prepolymers having different -NCO/-OH ratio were synthesized, by reaction of 4,4´-diphenylmethane diisocyanate (MDI) with castor oil (CO), to be used as modifying agent of asphaltic bitumen. Reactions between MDI and CO, performed with -NCO/-OH molar ratios of 8:1 and 4:1, have led to suitable bi...

Chemical structure of carbamoylating groups and their relationship to bone marrow toxicity and antiglioma activity of bifunctionally alkylating and carbamoylating nitrosoureas.

Science.gov (United States)

Ali-Osman, F; Giblin, J; Berger, M; Murphy, M J; Rosenblum, M L

1985-09-01

Although the antitumor effects of chloroethylnitrosoureas have been shown to be due primarily to DNA-DNA cross-linking by the alkylating moieties of these agents, the basis of the often accompanying bone marrow toxicity has been more controversial. We report on the relative bone marrow toxicity of four model nitrosoureas with different alkylating and carbamoylating activities: 1,3-bis(2-chloroethyl)-1-nitrosourea; 1,3-bis(trans-4-hydroxycyclohexyl)-1-nitrosourea; chlorozotozin, (2-[3-(2-chloroethyl)-3 -nitrosoureido]-2-deoxy-D-glucopyranose); and -3-(beta-D-glucopyranosyl)-1-nitrosourea. Inhibitions of DNA, RNA, and protein synthesis in murine bone marrow cells and of colony growth of myeloid precursor cells (granulocyte-macrophage colony-forming units) were used as in vitro end points of myelotoxicity. Further, we determined the antiglioma activity of the four nitrosoureas on two human gliomas in a clonogenic tumor cell assay and studied the effect of the non-nitrosourea carbamoylators potassium cyanate, chloroethyl isocyanate, cyclohexyl isocyanate, ethyl isocyanate, and ethyl isothiocyanate on granulocyte-macrophage colony-forming units. The results show that, at equivalent drug exposures, clonogenic glioma cell kill was significant and comparative for 1,3-bis(2-chloroethyl)-1-nitrosourea, 1-(2-chloroethyl)-3-(beta-D-glucopyranosyl)-1-nitrosourea, and chlorozotocin; 1,3-bis(trans-4-hydroxycyclohexyl)-1-nitrosourea showed little activity. In contrast, granulocyte-macrophage colony-forming unit toxicity was low with chlorozotocin and 1-(2-chloroethyl)-3-(beta-D-glucopyranosyl)-1-nitrosourea and very high with 1,3-bis(2-chloroethyl)-1-nitrosourea and 1,3-bis(trans-4-hydroxycyclohexyl)-1-nitrosourea. Of the isocyanates, bone marrow toxicity was highest with chloroethyl isocyanate and cyclohexyl isocyanate, intermediate with ethyl isocyanate, and lowest with KOCN and ethyl isothiocyanate. Our results indicate that (a) bifunctional alkylation is essential for

Preparation of graphite derivatives by selective reduction of graphite oxide and isocyanate functionalization

Czech Academy of Sciences Publication Activity Database

Kumar, A. R. S. S.; Piana, Francesco; Mičušík, M.; Pionteck, J.; Banerjee, S.; Voit, B.

2016-01-01

Roč. 182, 1 October (2016), s. 237-245 ISSN 0254-0584 Institutional support: RVO:61389013 Keywords : graphite oxide * surface modification * conductive nanoparticles Subject RIV: CD - Macromolecular Chemistry Impact factor: 2.084, year: 2016

Recyclable organic solar cells on substrates comprising cellulose nanocrystals (CNC)

Science.gov (United States)

Kippelen, Bernard; Fuentes-Hernandez, Canek; Zhou, Yinhua; Moon, Robert; Youngblood, Jeffrey P

2015-12-01

Recyclable organic solar cells are disclosed herein. Systems and methods are further disclosed for producing, improving performance, and for recycling the solar cells. In certain example embodiments, the recyclable organic solar cells disclosed herein include: a first electrode; a second electrode; a photoactive layer disposed between the first electrode and the second electrode; an interlayer comprising a Lewis basic oligomer or polymer disposed between the photoactive layer and at least a portion of the first electrode or the second electrode; and a substrate disposed adjacent to the first electrode or the second electrode. The interlayer reduces the work function associated with the first or second electrode. In certain example embodiments, the substrate comprises cellulose nanocrystals that can be recycled. In certain example embodiments, one or more of the first electrode, the photoactive layer, and the second electrode may be applied by a film transfer lamination method.

Method for recovering aroma concentrate from a caffeine- or theobromine-comprising food base material

NARCIS (Netherlands)

Kattenberg, H.R.; Willemsen, J.H.A.; Starmans, D.A.J.; Hoving, H.D.; Winters, M.G.M.

2002-01-01

Described is a method for recovering aroma concentrate from a caffeine- or theobromine-comprising food base material, such as coffee or tea, and in particular cocoa, at least comprising the steps of: introducing the food base material into an aqueous extractant and incubating the food base material

Hot gas handling device and motorized vehicle comprising the device

NARCIS (Netherlands)

Klein Geltink, J.; Beukers, A.; Van Tooren, M.J.L.; Koussios, S.

2012-01-01

The invention relates to a device for handling hot exhaust gasses discharged from an internal combustion engine. The device comprises a housing (2), enclosing a space (3) for transporting the exhaust gasses. The housing (2) is provided with an entrance - opening (4) for the exhaust gasses discharged

Electromagnetic radiation absorbers and modulators comprising polyaniline

Science.gov (United States)

Epstein, Arthur J.; Ginder, John M.; Roe, Mitchell G.; Hajiseyedjavadi, Hamid

1992-01-01

A composition for absorbing electromagnetic radiation, wherein said electromagnetic radiation possesses a wavelength generally in the range of from about 1000 Angstroms to about 50 meters, wherein said composition comprises a polyaniline composition of the formula ##STR1## where y can be equal to or greater than zero, and R.sup.1 and R.sup.2 are independently selected from the group containing of H, --OCH.sub.3, --CH.sub.3, --F, --Cl, --Br, --I, NR.sup.3 .sub.2, --NHCOR.sup.3, --OH, --O.sup.-, SR.sup.3, --OCOR.sup.3, --NO.sub.2, --COOH, --COOR.sup.3, --COR.sup.3, --CHO, and --CN, where R.sup.3 is a C.sub.1 to C.sub.8 alkyl, aryl or aralkyl group.

Corrosion protection and adhesion properties of the epoxy coating applied on the steel substrate pre-treated by a sol-gel based silane coating filled with amino and isocyanate silane functionalized graphene oxide nanosheets

Science.gov (United States)

Parhizkar, Nafise; Ramezanzadeh, Bahram; Shahrabi, Taghi

2018-05-01

This research has focused on the effect of graphene oxide (GO) nano-fillers embedded in the sol-gel based silane coating on the corrosion protection and adhesion properties of the epoxy coating applied on the steel substrate pre-treated by silane coatings. For this purpose, a mixture of Methyltriethoxysilane (MTES) and Tetraethylorthosilicate (TEOS) silane precursors was used for preparation of composite matrix and the GO nanosheets, which are covalently functionalized with 3-(Triethoxysilyl)propyl isocyanate (TEPI, IGO nano-fillers) and 3-aminopropyltriethoxysilane (APTES, AGO nano-fillers), were used as filler. The GO, AGO and IGO nanosheets were characterized by Fourier Transform Infrared Spectroscopy (FT-IR), UV-Visible analysis and field emission-scanning electron microscopy techniques. The performance of the silane/epoxy coatings was investigated by pull-off adhesion, cathodic delamination, salt spray and electrochemical impedance spectroscopy (EIS) tests. Results revealed that AGO and IGO nano-fillers significantly improved the corrosion resistance and adhesion properties of the top epoxy coating due to better compatibility with silane matrix, excellent barrier properties and the formation of covalent bonds with the top epoxy coating.

Semipermeable thin-film membranes comprising siloxane, alkoxysilyl and aryloxysilyl oligomers and copolymers

Science.gov (United States)

Babcock, Walter C.; Friesen, Dwayne T.

1988-01-01

Novel semiperimeable membranes and thin film composite (TFC) gas separation membranes useful in the separation of oxygen, nitrogen, hydrogen, water vapor, methane, carbon dioxide, hydrogen sulfide, lower hydrocarbons, and other gases are disclosed. The novel semipermeable membranes comprise the polycondensation reaction product of two complementary polyfunctional compounds, each having at least two functional groups that are mutually reactive in a condensation polymerization reaction, and at least one of which is selected from siloxanes, alkoxsilyls and aryloxysilyls. The TFC membrane comprises a microporous polymeric support, the surface of which has the novel semipermeable film formed thereon, preferably by interfacial polymerization.

Alignment of Carbon Nanotubes Comprising Magnetically Sensitive Metal Oxides in Nanofluids

Science.gov (United States)

Hong, Haiping (Inventor); Peterson, G. P. " Bud" (Inventor)

2016-01-01

The present invention is a nanoparticle mixture or suspension or nanofluid comprising nonmagnetically sensitive nanoparticles, magnetically sensitive nanoparticles, and surfactant(s). The present invention also relates to methods of preparing and using the same.

Process for the separation of contaminant or mixture of contaminants from a Ch4-comprising gaseous feed streem

NARCIS (Netherlands)

2012-01-01

The invention provides a process for the separation of a contaminant or mixture of contaminants from a CH4-comprising gaseous feed streem, comprising the subsequent steps of: a) passing a CH4-comprising gaseous feed streem comprising the contaminant or the mixture of contaminants in to and through a

Multilayer Electroactive Polymer Composite Material Comprising Carbon Nanotubes

Science.gov (United States)

Ounaies, Zoubeida (Inventor); Park, Cheol (Inventor); Harrison, Joycelyn S. (Inventor); Holloway, Nancy M. (Inventor); Draughon, Gregory K. (Inventor)

2009-01-01

An electroactive material comprises multiple layers of electroactive composite with each layer having unique dielectric, electrical and mechanical properties that define an electromechanical operation thereof when affected by an external stimulus. For example, each layer can be (i) a 2-phase composite made from a polymer with polarizable moieties and an effective amount of carbon nanotubes incorporated in the polymer for a predetermined electromechanical operation, or (ii) a 3-phase composite having the elements of the 2-phase composite and further including a third component of micro-sized to nano-sized particles of an electroactive ceramic incorporated in the polymer matrix.

Polymer coating comprising 2-methoxyethyl acrylate units synthesized by surface-initiated atom transfer radical polymerization

DEFF Research Database (Denmark)

2011-01-01

Source: US2012184029A The present invention relates to preparation of a polymer coating comprising or consisting of polymer chains comprising or consisting of units of 2-methoxyethyl acrylate synthesized by Surface-Initiated Atom Transfer Radical Polymerization (SI ATRP) such as ARGET SI ATRP...

Soluble fullerene derivatives : The effect of electronic structure on transistor performance and air stability

NARCIS (Netherlands)

Ball, James M.; Bouwer, Ricardo K.M.; Kooistra, Floris B.; Frost, Jarvist M.; Qi, Yabing; Buchaca Domingo, Ester; Smith, Jeremy; de Leeuw, Dago M.; Hummelen, Jan C.; Nelson, Jenny; Kahn, Antoine; Stingelin, Natalie; Bradley, Donal D.C.; Anthopoulos, Thomas D.

2011-01-01

The family of soluble fullerene derivatives comprises a widely studied group of electron transporting molecules for use in organic electronic and optoelectronic devices. For electronic applications, electron transporting (n-channel) materials are required for implementation into organic

Sustainable hybrid photocatalysts: titania immobilized on carbon materials derived from renewable and biodegradable resources

Science.gov (United States)

This review comprises the preparation, properties and heterogeneous photocatalytic applications of TiO2 immobilized on carbon materials derived from earth-abundant, renewable and biodegradable agricultural residues and sea food waste resources. The overview provides key scientifi...

Radiation hardenable coating mixture

International Nuclear Information System (INIS)

Howard, D.D.

1977-01-01

This invention relates to coatings that harden under radiation and to their compositions. Specifically, this invention concerns unsaturated urethane resins polymerisable by addition and to compositions, hardening under the effect of radiation, containing these resins. These resins feature the presence of at least one unsaturated ethylenic terminal group of structure CH 2 =C and containing the product of the reaction of an organic isocyanate compound with at least two isocyanate groups and one polyester polyol with at least two hydroxyl groups, and one unsaturated monomer compound polymerisable by addition having a single active hydrogen group reacting with the isocyanate [fr

Bacterial Artificial Chromosome Clones of Viruses Comprising the Towne Cytomegalovirus Vaccine

Directory of Open Access Journals (Sweden)

Xiaohong Cui

2012-01-01

Full Text Available Bacterial artificial chromosome (BAC clones have proven invaluable for genetic manipulation of herpesvirus genomes. BAC cloning can also be useful for capturing representative genomes that comprise a viral stock or mixture. The Towne live attenuated cytomegalovirus vaccine was developed in the 1970s by serial passage in cultured fibroblasts. Although its safety, immunogenicity, and efficacy have been evaluated in nearly a thousand human subjects, the vaccine itself has been little studied. Instead, genetic composition and in vitro growth properties have been inferred from studies of laboratory stocks that may not always accurately represent the viruses that comprise the vaccine. Here we describe the use of BAC cloning to define the genotypic and phenotypic properties of viruses from the Towne vaccine. Given the extensive safety history of the Towne vaccine, these BACs provide a logical starting point for the development of next-generation rationally engineered cytomegalovirus vaccines.

Bacterial artificial chromosome clones of viruses comprising the towne cytomegalovirus vaccine.

Science.gov (United States)

Cui, Xiaohong; Adler, Stuart P; Davison, Andrew J; Smith, Larry; Habib, El-Sayed E; McVoy, Michael A

2012-01-01

Bacterial artificial chromosome (BAC) clones have proven invaluable for genetic manipulation of herpesvirus genomes. BAC cloning can also be useful for capturing representative genomes that comprise a viral stock or mixture. The Towne live attenuated cytomegalovirus vaccine was developed in the 1970s by serial passage in cultured fibroblasts. Although its safety, immunogenicity, and efficacy have been evaluated in nearly a thousand human subjects, the vaccine itself has been little studied. Instead, genetic composition and in vitro growth properties have been inferred from studies of laboratory stocks that may not always accurately represent the viruses that comprise the vaccine. Here we describe the use of BAC cloning to define the genotypic and phenotypic properties of viruses from the Towne vaccine. Given the extensive safety history of the Towne vaccine, these BACs provide a logical starting point for the development of next-generation rationally engineered cytomegalovirus vaccines.

Solid phase syntheses of oligoureas

Energy Technology Data Exchange (ETDEWEB)

Burgess, K.; Linthicum, D.S.; Russell, D.H.; Shin, H.; Shitangkoon, A.; Totani, R.; Zhang, A.J.; Ibarzo, J. [Texas A& M Univ., College Station, TX (United States)

1997-02-19

Isocyanates 7 were formed from monoprotected diamines 3 or 6, which in turn can be easily prepared from commercially available N-BOC- or N-FMOC-protected amino acid derivatives. Isocyanates 7, formed in situ, could be coupled directly to a solid support functionalized with amine groups or to amino acids anchored on resins using CH{sub 2}Cl{sub 2} as solvent and an 11 h coupling time at 25 {degree}C. Such couplings afforded peptidomimetics with an N-phthaloyl group at the N-terminus. The optimal conditions identified for removal of the N-phthaloyl group were to use 60% hydrazine in DMF for 1-3 h. Several sequences of amino acids coupled to ureas (`peptidic ureas`) and of sequential urea units (`oligoureas`) were prepared via solid phase syntheses and isolated by HPLC. Partition coefficients were measured for two of these peptidomimetics, and their water solubilities were found to be similar to the corresponding peptides. A small library of 160 analogues of the YGGFL-amide sequence was prepared via Houghten`s tea bag methodology. This library was tested for binding to the anti-{beta}-endorphin monoclonal antibody. Overall, this paper describes methodology for solid phase syntheses of oligourea derivatives with side chains corresponding to some of the protein amino acids. The chemistry involved is ideal for high-throughput syntheses and screening operations. 51 refs., 3 figs., 2 tabs.

40 CFR 63.1292 - Definitions.

Science.gov (United States)

2010-07-01

... added to assist foaming by generating gas beyond that resulting from the isocyanate-water reaction..., material safety data sheets, or engineering calculations. High-pressure mixhead means a mixhead where.... Isocyanate means a reactive chemical grouping composed of a nitrogen atom bonded to a carbon atom bonded to...

Determination of albumin adducts of 4,4'-methylenediphenyl diisocyanate after specific inhalative challenge tests in workers.

Science.gov (United States)

Sabbioni, Gabriele; Dongari, Nagaraju; Kumar, Anoop; Baur, Xaver

2016-10-17

4,4'-Methylenediphenyl diisocyanate (MDI) is the most important isocyanate used in the industry. Lung sensitization with bronchial asthma is the main disorder in exposed workers. Albumin adducts of MDI might be involved in specific immunological reactions. MDI adducts with lysine (MDI-Lys) of albumin have been found in MDI-workers and construction workers. MDI-Lys is an isocyanate-specific adduct of MDI with albumin. In the present study, we report MDI-adducts in workers undergoing diagnostic MDI challenge tests. The workers were exposed for 2h to 5ppb of MDI. The adduct levels increase significantly after the exposure to MDI in the challenge chamber. About 0.6% of the dose was bound to albumin. So far, only urinary metabolites of MDI were measured to monitor isocyanate workers. However, such urinary metabolites are not isocyanate specific. Therefore, we propose to measure albumin adducts for monitoring MDI exposed subjects. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

77 FR 5091 - Certain New Chemicals; Receipt and Status Information

Science.gov (United States)

2012-02-01

...) Component of coatings.... (G) Isocyanate polymer, alcohol- blocked. P-12-0057 11/18/2011 02/15/2012 CBI (G) Component of coatings.... (G) Hydroxyalkenoate, polymer with isocyanate and diglycol, alcohol- blocked. P-12... substance is used (G) Aromatic substituted in liquid and polymer-based isobenzofuranone. sensors that change...

Electric circuit breaker comprising a plurality of vacuum interrupters simultaneously operated by a common operator

Science.gov (United States)

Barkan, Philip; Imam, Imdad

1980-01-01

This circuit breaker comprises a plurality of a vacuum-type circuit interrupters, each having a movable contact rod. A common operating device for the interrupters comprises a linearly-movable operating member. The interrupters are mounted at one side of the operating member with their movable contact rods extending in a direction generally toward the operating member. Means is provided for mechanically coupling the operating member to the contact rods, and this means comprises a plurality of insulating operating rods, each connected at one end to the operating member and at its opposite end to one of the movable contact rods. The operating rods are of substantially equal length and have longitudinal axes that converge and intersect at substantially a common point.

Molecular sleds comprising a positively -charged amino acid sequence and a molecular cargo and uses thereof

NARCIS (Netherlands)

Mangel, F Walter; Blainey, Paul C; Graziano, Vito; Herrmann, Andreas; McGrath, William J; van Oijen, Antonius Martinus; Xie, Xiaoliang Sunney

2014-01-01

The present invention relates to compositions which may comprise a molecular sled linked to cargo and uses thereof. In particular, the present invention relates to a non-naturally occurring or engineered composition which may comprise a molecular sled, linkers and a molecular cargo connected to the

Method and device for fabricating dispersion fuel comprising fission product collection spaces

Science.gov (United States)

Shaber, Eric L; Fielding, Randall S

2015-05-05

A method of fabricating a nuclear fuel comprising a fissile material, one or more hollow microballoons, a phenolic resin, and metal matrix. The fissile material, phenolic resin and the one or more hollow microballoons are combined. The combined fissile material, phenolic resin and the hollow microballoons are heated sufficiently to form at least some fissile material carbides creating a nuclear fuel particle. The resulting nuclear fuel particle comprises one or more fission product collection spaces. In a preferred embodiment, the fissile material, phenolic resin and the one or more hollow microballoons are combined by forming the fissile material into microspheres. The fissile material microspheres are then overcoated with the phenolic resin and microballoon. In another preferred embodiment, the fissile material, phenolic resin and the one or more hollow microballoons are combined by overcoating the microballoon with the fissile material, and phenolic resin.

An oral Mycobacterium bovis BCG vaccine for wildlife produced in the absence of animal-derived reagents.

Science.gov (United States)

Cross, Martin L; Lambeth, Matthew R; Aldwell, Frank E

2009-09-01

Cultures of Mycobacterium bovis BCG, comprising predominantly single-cell bacilli, were prepared in broth without animal-derived reagents. When formulated into a vegetable-derived lipid matrix, the vaccine was stable in vitro and was immunogenic in vivo upon feeding it to mice. This formulation could be useful for oral vaccination of wildlife against tuberculosis, where concern over transmissible prions may preclude the field use of vaccines containing animal products.

Lateral acoustic wave resonator comprising a suspended membrane of low damping resonator material

Science.gov (United States)

Olsson, Roy H.; El-Kady; , Ihab F.; Ziaei-Moayyed, Maryam; Branch; , Darren W.; Su; Mehmet F.,; Reinke; Charles M.,

2013-09-03

A very high-Q, low insertion loss resonator can be achieved by storing many overtone cycles of a lateral acoustic wave (i.e., Lamb wave) in a lithographically defined suspended membrane comprising a low damping resonator material, such as silicon carbide. The high-Q resonator can sets up a Fabry-Perot cavity in a low-damping resonator material using high-reflectivity acoustic end mirrors, which can comprise phononic crystals. The lateral overtone acoustic wave resonator can be electrically transduced by piezoelectric couplers. The resonator Q can be increased without increasing the impedance or insertion loss by storing many cycles or wavelengths in the high-Q resonator material, with much lower damping than the piezoelectric transducer material.

Energy storage systems having an electrode comprising Li.sub.xS.sub.y

Science.gov (United States)

Xiao, Jie; Zhang, Jiguang; Graff, Gordon L.; Liu, Jun; Wang, Wei; Zheng, Jianming; Xu, Wu; Shao, Yuyan; Yang, Zhenguo

2016-08-02

Improved lithium-sulfur energy storage systems can utilizes Li.sub.xS.sub.y as a component in an electrode of the system. For example, the energy storage system can include a first electrode current collector, a second electrode current collector, and an ion-permeable separator separating the first and second electrode current collectors. A second electrode is arranged between the second electrode current collector and the separator. A first electrode is arranged between the first electrode current collector and the separator and comprises a first condensed-phase fluid comprising Li.sub.xS.sub.y. The energy storage system can be arranged such that the first electrode functions as a positive or a negative electrode.

Nanoscale Cross-Point Resistive Switching Memory Comprising p-Type SnO Bilayers

KAUST Repository

Hota, Mrinal Kanti; Hedhili, Mohamed N.; Wang, Qingxiao; Melnikov, Vasily; Mohammed, Omar F.; Alshareef, Husam N.

2015-01-01

Reproducible low-voltage bipolar resistive switching is reported in bilayer structures of p-type SnO films. Specifically, a bilayer homojunction comprising SnOx (oxygen-rich) and SnOy (oxygen-deficient) in nanoscale cross-point (300 × 300 nm2

Microwave-assisted synthesis of N-pyrazole ureas and the p38alpha inhibitor BIRB 796 for study into accelerated cell ageing.

Science.gov (United States)

Bagley, Mark C; Davis, Terence; Dix, Matthew C; Widdowson, Caroline S; Kipling, David

2006-11-21

Microwave irradiation of substituted hydrazines and beta-ketoesters gives 5-aminopyrazoles in excellent yield, which can be transformed to the corresponding N-carbonyl derivatives by treatment with an isocyanate or chloroformate. Derivatization of 4-nitronaphth-1-ol using predominantly microwave heating methods and reaction with an N-pyrazole carbamate provides a rapid route to the N-pyrazole urea BIRB 796 in high purity, as a potent and selective inhibitor of p38alpha mitogen-activated protein kinase for the study of accelerated ageing in Werner syndrome cells.

Carbamoylating activity associated with the activation of the antitumor agent laromustine inhibits angiogenesis by inducing ASK1-dependent endothelial cell death.

Directory of Open Access Journals (Sweden)

Weidong Ji

Full Text Available The anticancer agent 1,2-bis(methylsulfonyl-1-(2-chloroethyl-2-[(methylaminocarbonyl]hydrazine (laromustine, upon decomposition in situ, yields methyl isocyanate and the chloroethylating species 1,2-bis(methylsulfonyl-1-(2-chloroethylhydrazine (90CE. 90CE has been shown to kill tumor cells via a proposed mechanism that involves interstrand DNA cross-linking. However, the role of methyl isocyanate in the antineoplastic function of laromustine has not been delineated. Herein, we show that 1,2-bis(methylsulfonyl-1-[(methylaminocarbonyl]hydrazine (101MDCE, an analog of laromustine that generates only methyl isocyanate, activates ASK1-JNK/p38 signaling in endothelial cells (EC. We have previously shown that ASK1 forms a complex with reduced thioredoxin (Trx1 in resting EC, and that the Cys residues in ASK1 and Trx1 are critical for their interaction. 101MDCE dissociated ASK1 from Trx1, but not from the phosphoserine-binding inhibitor 14-3-3, in whole cells and in cell lysates, consistent with the known ability of methyl isocyanate to carbamoylate free thiol groups of proteins. 101MDCE had no effect on the kinase activity of purified ASK1, JNK, or the catalytic activity of Trx1. However, 101MDCE, but not 90CE, significantly decreased the activity of Trx reductase-1 (TrxR1. We conclude that methyl isocyanate induces dissociation of ASK1 from Trx1 either directly by carbamoylating the critical Cys groups in the ASK1-Trx1 complex or indirectly by inhibiting TrxR1. Furthermore, 101MDCE (but not 90CE induced EC death through a non-apoptotic (necroptotic pathway leading to inhibition of angiogenesis in vitro. Our study has identified methyl isocyanates may contribute to the anticancer activity in part by interfering with tumor angiogenesis.

Radiation sensitive polymers of oxygen-substituted maleimides and elements containing same

International Nuclear Information System (INIS)

Wilson, J.C.

1977-01-01

Radiation sensitive polymers comprising from about 1 to 100 mole % of a polymerized maleimide monomer consisting of a hydrocarbon group having from 2 to 20 carbon atoms, preferably a bridged hydrocarbon group having from 6 to 10 carbon atoms and from 0 to about 99 mole % of at least one additional polymerized ethylenically unsaturated monomer are described. The polymers are soluble in organic solvents, possess desirably high glass transition temperatures and are capable of undergoing a photochemical reaction to yield polymers having isocyanate and oxy-substituted cyclopropane moieties which are capable of crosslinking in the presence of active hydrogen-containing compounds. The polymers are useful in radiation sensitive compositions and elements containing same

Low oxygen biomass-derived pyrolysis oils and methods for producing the same

Science.gov (United States)

Marinangeli, Richard; Brandvold, Timothy A; Kocal, Joseph A

2013-08-27

Low oxygen biomass-derived pyrolysis oils and methods for producing them from carbonaceous biomass feedstock are provided. The carbonaceous biomass feedstock is pyrolyzed in the presence of a catalyst comprising base metal-based catalysts, noble metal-based catalysts, treated zeolitic catalysts, or combinations thereof to produce pyrolysis gases. During pyrolysis, the catalyst catalyzes a deoxygenation reaction whereby at least a portion of the oxygenated hydrocarbons in the pyrolysis gases are converted into hydrocarbons. The oxygen is removed as carbon oxides and water. A condensable portion (the vapors) of the pyrolysis gases is condensed to low oxygen biomass-derived pyrolysis oil.

Study of the formation of lignin-based polyurethanes

OpenAIRE

Cateto, C.A.; Barreiro, M.F.; Rodrigues, A.E.

2004-01-01

The main objective of this work was to study the reactivity of lignin with isocyanates in the presence of a polyesther as the flexible segment. The course of the polymerization reaction was followed by FTIR working in the ATR mode. The decay in the isocyanate absorbance was measured during 30 minutes at a temperature of 80 ºC.

Methods of forming aluminum oxynitride-comprising bodies, including methods of forming a sheet of transparent armor

Science.gov (United States)

Chu, Henry Shiu-Hung [Idaho Falls, ID; Lillo, Thomas Martin [Idaho Falls, ID

2008-12-02

The invention includes methods of forming an aluminum oxynitride-comprising body. For example, a mixture is formed which comprises A:B:C in a respective molar ratio in the range of 9:3.6-6.2:0.1-1.1, where "A" is Al.sub.2O.sub.3, "B" is AlN, and "C" is a total of one or more of B.sub.2O.sub.3, SiO.sub.2, Si--Al--O--N, and TiO.sub.2. The mixture is sintered at a temperature of at least 1,600.degree. C. at a pressure of no greater than 500 psia effective to form an aluminum oxynitride-comprising body which is at least internally transparent and has at least 99% maximum theoretical density.

Neurosensory and vascular function after 14 months of military training comprising cold winter conditions.

Science.gov (United States)

Carlsson, Daniel; Pettersson, Hans; Burström, Lage; Nilsson, Tohr; Wahlström, Jens

2016-01-01

This study aimed to examine the effects of 14 months of military training comprising cold winter conditions on neurosensory and vascular function in the hands and feet. Military conscripts (N=54) were assessed with quantitative sensory testing comprising touch, temperature, and vibration perception thresholds and finger systolic blood pressure (FSBP) after local cooling and a questionnaire on neurosensory and vascular symptoms at both baseline and follow-up. Ambient air temperature was recorded with body worn temperature loggers. The subjects showed reduced sensitivity to perception of touch, warmth, cold and vibrations in both the hands and feet except from vibrotactile perception in digit two of the right hand (right dig 2). Cold sensations, white fingers, and pain/discomfort when exposed to cold as well as pain increased in both prevalence and severity. There were no statistically significant changes in FSBP after local cooling. Fourteen months of winter military training comprising cold winter conditions reduced sensation from touch, warmth, cold, and vibrotactile stimulus in both hands and feet and increased the severity and prevalence of symptoms and pain. The vascular function in the hands, measured by FSBP after local cooling, was not affected.

Marine-derived fungi as a source of proteases

Digital Repository Service at National Institute of Oceanography (India)

Kamat, T.; Rodrigues, C.; Naik, C.G.

, of marine-derived fungi in order to identify the potential sources. Sponge and corals were collected by SCUBA diving, from a depth of 8 to 10 m from the coastal waters of Mandapam, Tamil Nadu (9"16' N; 79"liE). The samples comprised of a soft coral Sinularia... pieces of approximately 2x2 cm were cut out aseptically. These fourteen pieces of each organism were subjected to two different treatments 23 • In the first case seven pieces were vortexed four times, for 20 seconds each, with sterile seawater while...

Photodetection, photon event localization and position tomography device comprising a gammagraphy camera equipped wit such devices

International Nuclear Information System (INIS)

Jatteau, M.R.

1984-01-01

This device of photodetection and photon event (and noticeably scintillations) localization comprises at least a photomultiplier tube with unique photomultiplying structure and in front of this tube, a net of juxtaposed conduction metal wires excited by voltage pulses. This net comprises only 2n metallic wires to assure the localization of 2sup(2n) possible positions, and that is one of its characteristics [fr

Optical device comprising a cantilever and method of fabrication and use thereof

NARCIS (Netherlands)

Iannuzzi, Davide; Deladi, S.; Elwenspoek, Michael Curt

2008-01-01

The present invention provides an optical device, comprising an optical fiber and a cantilever that is arranged on an end of the optical fiber; The cantilever may be an integral part of the optical fiber, and may have a length that is substantially equal to a diameter of the optical fiber.

Optical device comprising a cantilever and method of fabrication and use thereof

NARCIS (Netherlands)

Iannuzzi, Davide; Deladi, S.; Elwenspoek, Michael Curt

2011-01-01

The present invention provides an optical device, comprising an optical fiber and a cantilever that is arranged on an end of the optical fiber; The cantilever may be an integral part of the optical fiber, and may have a length that is substantially equal to a diameter of the optical fiber.

Modeling superhydrophobic surfaces comprised of random roughness

Science.gov (United States)

Samaha, M. A.; Tafreshi, H. Vahedi; Gad-El-Hak, M.

2011-11-01

We model the performance of superhydrophobic surfaces comprised of randomly distributed roughness that resembles natural surfaces, or those produced via random deposition of hydrophobic particles. Such a fabrication method is far less expensive than ordered-microstructured fabrication. The present numerical simulations are aimed at improving our understanding of the drag reduction effect and the stability of the air-water interface in terms of the microstructure parameters. For comparison and validation, we have also simulated the flow over superhydrophobic surfaces made up of aligned or staggered microposts for channel flows as well as streamwise or spanwise ridge configurations for pipe flows. The present results are compared with other theoretical and experimental studies. The numerical simulations indicate that the random distribution of surface roughness has a favorable effect on drag reduction, as long as the gas fraction is kept the same. The stability of the meniscus, however, is strongly influenced by the average spacing between the roughness peaks, which needs to be carefully examined before a surface can be recommended for fabrication. Financial support from DARPA, contract number W91CRB-10-1-0003, is acknowledged.

Processes for converting biomass-derived feedstocks to chemicals and liquid fuels

Science.gov (United States)

Held, Andrew; Woods, Elizabeth; Cortright, Randy; Gray, Matthew

2018-04-17

The present invention provides processes, methods, and systems for converting biomass-derived feedstocks to liquid fuels and chemicals. The method generally includes the reaction of a hydrolysate from a biomass deconstruction process with hydrogen and a catalyst to produce a reaction product comprising one of more oxygenated compounds. The process also includes reacting the reaction product with a condensation catalyst to produce C.sub.4+ compounds useful as fuels and chemicals.

Processes for converting biomass-derived feedstocks to chemicals and liquid fuels

Science.gov (United States)

Held, Andrew; Woods, Elizabeth; Cortright, Randy; Gray, Matthew

2017-05-23

The present invention provides processes, methods, and systems for converting biomass-derived feedstocks to liquid fuels and chemicals. The method generally includes the reaction of a hydrolysate from a biomass deconstruction process with hydrogen and a catalyst to produce a reaction product comprising one of more oxygenated compounds. The process also includes reacting the reaction product with a condensation catalyst to produce C.sub.4+ compounds useful as fuels and chemicals.

Self-composite comprised of nanocrystalline diamond and a non-diamond component useful for thermoelectric applications

Science.gov (United States)

Gruen, Dieter M [Downers Grove, IL

2009-08-11

One provides nanocrystalline diamond material that comprises a plurality of substantially ordered diamond crystallites that are sized no larger than about 10 nanometers. One then disposes a non-diamond component within the nanocrystalline diamond material. By one approach this non-diamond component comprises an electrical conductor that is formed at the grain boundaries that separate the diamond crystallites from one another. The resultant nanowire is then able to exhibit a desired increase with respect to its ability to conduct electricity while also preserving the thermal conductivity behavior of the nanocrystalline diamond material.

Instrument comprising a cable or tube provided provided with a propulsion device

NARCIS (Netherlands)

Breedveld, P.

2006-01-01

The invention relates to an instrument (1) comprising a cable or tube (3), at a distal end of which a propulsion device (4) is provided for moving the cable or tube in a hollow space, the propulsion device being shaped like a donut lying in a plane at right angles to the longitudinal direction of

Ionizing device comprising a microchannel electron multiplier with secondary electron emission

International Nuclear Information System (INIS)

Chalmeton, Vincent.

1974-01-01

The present invention relates to a ionizing device comprising a microchannel electron multiplier involving secondary electron emission as a means of ionization. A system of electrodes is used to accelerate said electrons, ionize the gas and extract the ions from thus created plasma. Said ionizer is suitable for bombarding the target in neutron sources (target of the type of nickel molybdenum coated with tritiated titanium or with a tritium deuterium mixture) [fr

Carbamylation of proteins – mechanism, causes and consequences

Directory of Open Access Journals (Sweden)

Anna Pieniążek

2016-05-01

Full Text Available Carbamylation (carbamoylation is a post-translational modification resulting from the nonenzymatic reaction between isocyanic acid and free functional groups of proteins, in particular with the free amino groups. This reaction alters structural and functional properties of proteins and results in faster aging of proteins.Urea present in the body can be transformed into cyanate and its more reactive form, isocyanic acid. High concentration of urea is associated with some diseases, especially with chronic renal failure and atherosclerosis. In human tissues, urea and cyanate are in equilibrium in aqueous solutions. Surprisingly, concentration of isocyanate in the body is much lower than it would appear from the kinetic parameters of urea decomposition. The low concentration of isocyanic acid results from its high reactivity and short half-life.In this review we describe the biochemical mechanism of carbamylation of proteins and freeamino acids. We summarize the literature data for carbamylation of hemoglobin, lipoproteins,albumin, membrane proteins and erythropoietin in chronic renal failure.In summary, the carbamylation of proteins may have a negative impact on their biologicalactivity and may contribute to the deterioration of patients with chronic renal failure.

Understanding Factors that Influence Protective Glove Use among Automotive Spray Painters

Science.gov (United States)

Ceballos, Diana; Reeb-Whitaker, Carolyn; Glazer, Patricia; Murphy-Robinson, Helen; Yost, Michael

2017-01-01

Dermal contact with isocyanate-based coatings may lead to systemic respiratory sensitization. The most common isocyanates found in sprayed automotive coatings are monomeric and oligomeric 1,6-hexamethylene diisocyanate (HDI) and isophorone diisocyanate (IPDI). Most spray painters use thin (4–5 mil) latex gloves that are not effective at preventing dermal exposures when spraying isocyanate paints. Personal interviews with collision repair industry personnel and focus groups with spray painters were held to characterize risk awareness, to examine perceptions and challenges concerning protective glove use and selection, and to generate ideas for protective glove use interventions. The most popular gloves among spray painters were thin (4–5 mil) and thick (14 mil) latex. We found that medium to thick (6–8 mil) nitrile were not always perceived as comfortable and were expected to be more expensive than thin (4–5 mil) latex gloves. Of concern is the users’ difficulty to distinguish between nitrile and latex gloves; latex gloves are now sold in different colors including blue, which has traditionally been associated with nitrile gloves. Even though spray painters were familiar with the health hazards related to working with isocyanate paints; most were not always aware that dermal exposure to isocyanates could contribute to the development of occupational asthma. There is a need for more research to identify dermal materials that are protective against sprayed automotive coatings. Automotive spray painters and their employers need to be educated in the selection and use of protective gloves, specifically on attributes such as glove material, color, and thickness. PMID:24215135

Photomlxer for terahertz electromagnetic wave emission comprising quantum dots in a laser cavity

DEFF Research Database (Denmark)

2013-01-01

The present invention relates to a photomixer for generating terahertz electromagnetic radiation in response to illumination by a time-modulated optical signal. The photomixer (300) comprises a carrier substrate (310) with a plurality of quantum dots arranged in an emission region (308) thereof...

Synthetic Studies Towards the Core Structure of Nakadomarin A by a Thioamide-Based Strategy

Science.gov (United States)

Chavda, Jai K; Procopiou, Panayiotis A; Horton, Peter N; Coles, Simon J; Porter, Michael J

2014-01-01

The tricyclic BCD substructure of the marine natural product nakadomarin A has been synthesised. The strategy utilised a key carbon–carbon bond-forming reaction between a furan and an N-acyliminium ion derived from a secondary thiolactam. In addition, a novel three-component coupling reaction between a thioamide, an allylic bromide and an isocyanate, leading to the establishment of two new stereogenic centres, is reported. Two key steps in a projected total synthesis of nakadomarin A have been realised by using the unique chemistry of thioamides. Formation of the carbocyclic B ring can be effected by nucleophilic attack of a furan on a thiolactam-derived iminium ion, and the key quaternary centre can be established by a novel three-component coupling reaction. PMID:24829538

Compositions and methods comprising cellulase variants with reduced affinity to non-cellulosic materials

Energy Technology Data Exchange (ETDEWEB)

Cascao-Pereira, Luis; Kaper, Thijs; Kelemen, Bradley R.; Liu, Amy D.

2017-07-04

The present disclosure relates to cellulase variants. In particular the present disclosure relates to cellulase variants having reduced binding to non-cellulosic materials. Also described are nucleic acids encoding the cellulase, compositions comprising said cellulase, methods of identifying cellulose variants and methods of using the compositions.

Compositions and methods comprising cellulase variants with reduced affinity to non-cellulosic materials

Science.gov (United States)

Cascao-Pereira, Luis G.; Kaper, Thijs; Kelemen, Bradley R; Liu, Amy D.

2012-08-07

The present disclosure relates to cellulase variants. In particular the present disclosure relates to cellulase variants having reduced binding to non-cellulosic materials. Also described are nucleic acids encoding the cellulase, compositions comprising said cellulase, methods of identifying cellulose variants and methods of using the compositions.

Compositions and methods comprising cellulase variants with reduced affinity to non-cellulosic materials

Energy Technology Data Exchange (ETDEWEB)

Cascao-Pereira, Luis G; Kaper, Thijs; Kelemen, Bradley R; Liu, Amy D

2015-04-07

The present disclosure relates to cellulase variants. In particular the present disclosure relates to cellulase variants having reduced binding to non-cellulosic materials. Also described are nucleic acids encoding the cellulase, compositions comprising said cellulase, methods of identifying cellulose variants and methods of using the compositions.

Niche-dependent development of functional neuronal networks from embryonic stem cell-derived neural populations

Directory of Open Access Journals (Sweden)

Siebler Mario

2009-08-01

Full Text Available Abstract Background The present work was performed to investigate the ability of two different embryonic stem (ES cell-derived neural precursor populations to generate functional neuronal networks in vitro. The first ES cell-derived neural precursor population was cultivated as free-floating neural aggregates which are known to form a developmental niche comprising different types of neural cells, including neural precursor cells (NPCs, progenitor cells and even further matured cells. This niche provides by itself a variety of different growth factors and extracellular matrix proteins that influence the proliferation and differentiation of neural precursor and progenitor cells. The second population was cultivated adherently in monolayer cultures to control most stringently the extracellular environment. This population comprises highly homogeneous NPCs which are supposed to represent an attractive way to provide well-defined neuronal progeny. However, the ability of these different ES cell-derived immature neural cell populations to generate functional neuronal networks has not been assessed so far. Results While both precursor populations were shown to differentiate into sufficient quantities of mature NeuN+ neurons that also express GABA or vesicular-glutamate-transporter-2 (vGlut2, only aggregate-derived neuronal populations exhibited a synchronously oscillating network activity 2–4 weeks after initiating the differentiation as detected by the microelectrode array technology. Neurons derived from homogeneous NPCs within monolayer cultures did merely show uncorrelated spiking activity even when differentiated for up to 12 weeks. We demonstrated that these neurons exhibited sparsely ramified neurites and an embryonic vGlut2 distribution suggesting an inhibited terminal neuronal maturation. In comparison, neurons derived from heterogeneous populations within neural aggregates appeared as fully mature with a dense neurite network and punctuated

Antimalarial activity of compounds comprising a primary benzene sulfonamide fragment.

Science.gov (United States)

Andrews, Katherine T; Fisher, Gillian M; Sumanadasa, Subathdrage D M; Skinner-Adams, Tina; Moeker, Janina; Lopez, Marie; Poulsen, Sally-Ann

2013-11-15

Despite the urgent need for effective antimalarial drugs with novel modes of action no new chemical class of antimalarial drug has been approved for use since 1996. To address this, we have used a rational approach to investigate compounds comprising the primary benzene sulfonamide fragment as a potential new antimalarial chemotype. We report the in vitro activity against Plasmodium falciparum drug sensitive (3D7) and resistant (Dd2) parasites for a panel of fourteen primary benzene sulfonamide compounds. Our findings provide a platform to support the further evaluation of primary benzene sulfonamides as a new antimalarial chemotype, including the identification of the target of these compounds in the parasite. Copyright © 2013 Elsevier Ltd. All rights reserved.

Electrochemical supercapacitor application of electroless surface polymerization of polyaniline nanostructures

International Nuclear Information System (INIS)

Amarnath, Chellachamy A.; Chang, Jin Ho; Kim, Doyoung; Mane, Rajaram S.; Han, Sung-Hwan; Sohn, Daewon

2009-01-01

Electrochemical supercapacitive behaviour of polyaniline nanostructures, i.e., nanorods and nanospheres fabricated on aniline-primed conducting indium-tin oxide substrate via electroless surface polymerization using ammonium persulfate as initiator and selenious acid as efficient dopant is investigated. The self-assembled monolayer of urea derivative in presence of 3-(triethoxysilyl)-propyl isocyanate and aniline plays role of aniline-primed substrate. Polyaniline electrode composed of nanorods of excess surface area responsible for large redox reactions has shown 592 F g -1 specific capacitance which is significantly greater than closely compact polyaniline nanospheres, i.e., 214 F g -1

Preparation of salted meat products, e.g. cured bacon - by injecting liquid comprising meat proteins hydrolysed with enzymes

DEFF Research Database (Denmark)

1997-01-01

Preparation of salted meat products comprises the following:(1) meat is chopped into fine pieces and mixed with water to form a slurry; (2) enzymes hydrolyse proteins in the meat; (3) adding a culture to the resulting medium, which comprises short peptide chains or amino acids; (4) forming...... flavourings as the culture is growing, and (5) injecting the liquid into pieces of meat....

Structural and biophysical characterization of an antimicrobial peptide chimera comprised of lactoferricin and lactoferrampin

NARCIS (Netherlands)

Haney, E.F.; Nazmi, K.; Bolscher, J.G.M.; Vogel, H.J.

2012-01-01

Lactoferricin and lactoferrampin are two antimicrobial peptides found in the N-terminal lobe of bovine lactoferrin with broad spectrum antimicrobial activity against a range of Gram-positive and Gram-negative bacteria as well as Candida albicans. A heterodimer comprised of lactoferrampin joined to a

Combination Comprising Parthenolide For Use In The Treatment Of Alzheimer's Disease And Other Neurodegenerative Disorders

KAUST Repository

Bajic, Vladimir B.; Essack, Magbubah

2015-01-01

The present invention generally concerns particular methods and compositions for treatment of a neurodegenerative disease, such as Alzheimer's Disease. In particular embodiments, there is a composition comprising Parthenolide and a second agent

Interference with effects of amphotericin B on Candida albicans cells by 2-chloroethyl-1-nitrosoureas.

OpenAIRE

Brajtburg, J; Elberg, S; Kobayashi, G S; Medoff, G

1988-01-01

Two nitrosoureas, 1-(2-chloroethyl)-3-cyclohexyl-1-nitrosourea (CCNU) and 1,3-bis-(2-chloroethyl)-1-nitrosourea (BCNU), with strong carbamoylating and weak alkylating activities, interfered with the induction of potassium leakage and lethal action of amphotericin B (AmB) on Candida albicans. 2-Cyclohexyl isocyanate, the product of decomposition of CCNU, and 2-chloroethyl isocyanate, the product of decomposition of BCNU, also interfered with the anticandidal actions of AmB. In contrast, two ni...

Palladium catalyst system comprising zwitterion and/or acid-​functionalized ionic liquid

DEFF Research Database (Denmark)

2011-01-01

The present invention concerns a catalyst system in particular a catalyst system comprising Palladium (Pd), a zwitterion and/or an acid-functionalized ionic liquid, and one or more phosphine ligands, wherein the Pd catalyst can be provided by a complex precursor, such as Pd(CH3COO)2, PdCI2, Pd(CH3...... methyl methacrylate and/or methacrylic acid. Catalyst systems according to the invention are suitable for reactions forming separable product and catalyst phases and supported ionic liquid phase SILP applications....

Enzymes that cleave non-glycosidic ether bonds between lignins or derivatives thereof and saccharides

Science.gov (United States)

Kravit, Nancy G.; Schmidt, Katherine A.

2017-10-24

The patent application relates to isolated polypeptides that specifically cleave non-glycosidic ether bonds between lignins or derivatives thereof and saccharides, and to cDNAs encoding the polypeptides. The patent application also relates to nucleic acid constructs, expression vectors and host cells comprising the cDNAs, as well as methods of producing and using the isolated polypeptides for treating pulp and biomass to increase soluble saccharide yield and enrich lignin fractions.

Method of preparing an Al-Ti-B grain refiner for aluminium-comprising products, and a method of casting aluminium products

NARCIS (Netherlands)

Brinkman, H.J.; Duszczyk, J.; Katgerman, L.

1999-01-01

The invention relates to a method of preparing an Al-Ti-B grain refiner for cast aluminium-comprising products. According to the invention the preparation is realized by mixing powders selected from the group comprising aluminium, titanium, boron, and alloys and intermetallic compounds thereof,

Anticonvection device for a narrow space comprised between two parallel walls

International Nuclear Information System (INIS)

Costes, Didier.

1975-01-01

The invention relates to an anticonvection device providing strong limitations against the convection currents inside a space submitted to a vertical thermal gradient and more especially the space enclosed between the inner wall of a vessel generally cyclindrical in shape and of vertical axis, intended for a nuclear reactor, and the outer wall of a plug fitted together with said vessel. To this effect, said device is characterized in that it comprises a packing of a material of open porosity and thickness-wise elasticity, in the form of threads, fibers, knitted-cloths or sheets separated by distances shorter than the thickness of stagnancy under the temperature conditions inside said space [fr

A reconfigurable on-line learning spiking neuromorphic processor comprising 256 neurons and 128K synapses.

Science.gov (United States)

Qiao, Ning; Mostafa, Hesham; Corradi, Federico; Osswald, Marc; Stefanini, Fabio; Sumislawska, Dora; Indiveri, Giacomo

2015-01-01

Implementing compact, low-power artificial neural processing systems with real-time on-line learning abilities is still an open challenge. In this paper we present a full-custom mixed-signal VLSI device with neuromorphic learning circuits that emulate the biophysics of real spiking neurons and dynamic synapses for exploring the properties of computational neuroscience models and for building brain-inspired computing systems. The proposed architecture allows the on-chip configuration of a wide range of network connectivities, including recurrent and deep networks, with short-term and long-term plasticity. The device comprises 128 K analog synapse and 256 neuron circuits with biologically plausible dynamics and bi-stable spike-based plasticity mechanisms that endow it with on-line learning abilities. In addition to the analog circuits, the device comprises also asynchronous digital logic circuits for setting different synapse and neuron properties as well as different network configurations. This prototype device, fabricated using a 180 nm 1P6M CMOS process, occupies an area of 51.4 mm(2), and consumes approximately 4 mW for typical experiments, for example involving attractor networks. Here we describe the details of the overall architecture and of the individual circuits and present experimental results that showcase its potential. By supporting a wide range of cortical-like computational modules comprising plasticity mechanisms, this device will enable the realization of intelligent autonomous systems with on-line learning capabilities.

IDIOMS THAT COMPRISE THE PRESENCE OF TURKISH WORDS IN GREEK CYPRIOT LANGUAGE

OpenAIRE

Şevket ÖZNUR; Mahmut İSLÂMOĞLU

2010-01-01

In this communiqué again we preferred to present some examples from the effects of Turkish Cypriot Culture. For a few years, we have concentrated on our culture’s effect on other cultures in Cyprus. Bearing in mind that we have lived together for hundreds of years with other societies, we have seen fit to give examples of the cultural interaction between other cultures and Turkish Cypriot culture. Our communiqué mostly comprises the effects of Turkish Culture. We have found it convenient to p...

Semisynthetic Lipopeptides Derived from Nisin Display Antibacterial Activity and Lipid II Binding on Par with That of the Parent Compound

NARCIS (Netherlands)

Koopmans, Timo; Wood, Thomas M.; 't Hart, Peter; Kleijn, Laurens H. J.; Hendrickx, Antoni P. A.; Willems, Rob J. L.; Breukink, Eefjan; Martin, Nathaniel I.

2015-01-01

The lipid II-binding N-terminus of nisin, comprising the so-called A/B ring system, was synthetically modified to provide antibacterially active and proteolytically stable derivatives. A variety of lipids were coupled to the C-terminus of the nisin A/B ring system to generate semisynthetic

Tumor-Derived G-CSF Facilitates Neoplastic Growth through a Granulocytic Myeloid-Derived Suppressor Cell-Dependent Mechanism

Science.gov (United States)

Waight, Jeremy D.; Hu, Qiang; Miller, Austin; Liu, Song; Abrams, Scott I.

2011-01-01

Myeloid-derived suppressor cells (MDSC) are induced under diverse pathologic conditions, including neoplasia, and suppress innate and adaptive immunity. While the mechanisms by which MDSC mediate immunosuppression are well-characterized, details on how they develop remain less understood. This is complicated further by the fact that MDSC comprise multiple myeloid cell types, namely monocytes and granulocytes, reflecting diverse stages of differentiation and the proportion of these subpopulations vary among different neoplastic models. Thus, it is thought that the type and quantities of inflammatory mediators generated during neoplasia dictate the composition of the resultant MDSC response. Although much interest has been devoted to monocytic MDSC biology, a fundamental gap remains in our understanding of the derivation of granulocytic MDSC. In settings of heightened granulocytic MDSC responses, we hypothesized that inappropriate production of G-CSF is a key initiator of granulocytic MDSC accumulation. We observed abundant amounts of G-CSF in vivo, which correlated with robust granulocytic MDSC responses in multiple tumor models. Using G-CSF loss- and gain-of-function approaches, we demonstrated for the first time that: 1) abrogating G-CSF production significantly diminished granulocytic MDSC accumulation and tumor growth; 2) ectopically over-expressing G-CSF in G-CSF-negative tumors significantly augmented granulocytic MDSC accumulation and tumor growth; and 3) treatment of naïve healthy mice with recombinant G-CSF protein elicited granulocytic-like MDSC remarkably similar to those induced under tumor-bearing conditions. Collectively, we demonstrated that tumor-derived G-CSF enhances tumor growth through granulocytic MDSC-dependent mechanisms. These findings provide us with novel insights into MDSC subset development and potentially new biomarkers or targets for cancer therapy. PMID:22110722

Site-Selective Modification of Cellulose Nanocrystals with Isophorone Diisocyanate and Formation of Polyurethane-CNC Composites.

Science.gov (United States)

Girouard, Natalie M; Xu, Shanhong; Schueneman, Gregory T; Shofner, Meisha L; Meredith, J Carson

2016-01-20

The unequal reactivity of the two isocyanate groups in an isophorone diisocyante (IPDI) monomer was exploited to yield modified cellulose nanocrystals (CNCs) with both urethane and isocyanate functionality. The chemical functionality of the modified CNCs was verified with ATR-FTIR analysis and elemental analysis. The selectivity for the secondary isocyanate group using dibutyl tin dilaurate (DBTDL) as the reaction catalyst was confirmed with (13)C NMR. The modified CNCs showed improvements in the onset of thermal degradation by 35 °C compared to the unmodified CNCs. Polyurethane composites based on IPDI and a trifunctional polyether alcohol were synthesized using unmodified (um-CNC) and modified CNCs (m-CNC). The degree of nanoparticle dispersion was qualitatively assessed with polarized optical microscopy. It was found that the modification step facilitated superior nanoparticle dispersion compared to the um-CNCs, which resulted in increases in the tensile strength and work of fracture of over 200% compared to the neat matrix without degradation of elongation at break.

Sol-gel derived C-SiC composites and protective coatings for sustained durability in the space environment

Science.gov (United States)

Haruvy, Yair; Liedtke, Volker

2003-09-01

Composites and coatings were produced via the fast sol-gel process of a mixture of alkoxysilane precursors. The composites were comprised of carbon fibers, fabrics, or their precursors as reinforcement, and sol-gel-derived silicon carbide as matrix, aiming at high-temperature stable ceramics that can be utilized for re-entry structures. The protective coatings were comprised of fluorine-rich sol-gel derived resins, which exhibit high flexibility and coherence to provide sustained ATOX protection necessary for LEO space-exposed elements. For producing the composites, the sol-gel-derived resin is cast onto the reinforcement fibers/fabrics mat (carbon or its precursors) to produce a 'green' composite that is being cured. The 'green' composite is converted into a C-SiC composite via a gradual heat-pressure process under inert atmosphere, during which the organic substituents on the silicon atoms undergo internal oxidative pyrolysis via the schematic reaction: (SiRO3/2)n -> SiC + CO2 + H2O. The composition of the resultant silicon-oxi-carbide is tailorable via modifying the composition of the sol-gel reactants. The reinforcement, when made of carbon precursors, is converted into carbon during the heat-and-pressure processing as well. The C-SiC composites thus derived exhibit superior thermal stability and comparable thermal conductivity, combined with good mechanical strength features and failure resistance, which render them greatly applicable for re-entry shielding, heat-exchange pipes, and the like. Fluorine rich sol-gel derived coatings were developed as well, via the use of HF rich sol-gel process. These coatings provide oxidation-protection via the silica formation process, together with flexibility that allows 18,000 repetitive folding of the coating without cracking.

X-ray diffraction device comprising cooling medium connections provided on the x-ray tube

NARCIS (Netherlands)

1996-01-01

An X-ray diffraction device comprises a water-cooled X-ray tube which exhibits a line focus as well as, after rotation through 90 DEG , a point focus. Contrary to customary X-ray tubes, the cooling water is not supplied via the housing (12) in which the X-ray tube is mounted, but the cooling water

Alcohol dose dumping: The influence of ethanol on hot-melt extruded pellets comprising solid lipids.

Science.gov (United States)

Jedinger, N; Schrank, S; Mohr, S; Feichtinger, A; Khinast, J; Roblegg, E

2015-05-01

The objective of the present study was to investigate interactions between alcohol and hot-melt extruded pellets and the resulting drug release behavior. The pellets were composed of vegetable calcium stearate as matrix carrier and paracetamol or codeine phosphate as model drugs. Two solid lipids (Compritol® and Precirol®) were incorporated into the matrix to form robust/compact pellets. The drug release characteristics were a strong function of the API solubility, the addition of solid lipids, the dissolution media composition (i.e., alcohol concentration) and correspondingly, the pellet wettability. Pellets comprising paracetamol, which is highly soluble in ethanol, showed alcohol dose dumping regardless of the matrix composition. The wettability increased with increasing ethanol concentrations due to higher paracetamol solubilities yielding increased dissolution rates. For pellets containing codeine phosphate, which has a lower solubility in ethanol than in acidic media, the wettability was a function of the matrix composition. Dose dumping occurred for formulations comprising solid lipids as they showed increased wettabilities with increasing ethanol concentrations. In contrast, pellets comprising calcium stearate as single matrix component showed robustness in alcoholic media due to wettabilities that were not affected by the addition of ethanol. The results clearly indicate that the physico-chemical properties of the drug and the matrix systems are crucial for the design of ethanol-resistant dosage forms. Moreover, hydrophobic calcium stearate can be considered a suitable matrix system that minimizes the risk of ethanol-induced dose dumping for certain API's. Copyright © 2015 Elsevier B.V. All rights reserved.

ELECTRON IRRADIATION OF KUIPER BELT SURFACE ICES: TERNARY N2-CH4-CO MIXTURES AS A CASE STUDY

International Nuclear Information System (INIS)

Kim, Y. S.; Kaiser, R. I.

2012-01-01

The space weathering of icy Kuiper Belt Objects was investigated in this case study by exposing methane (CH 4 ) and carbon monoxide (CO) doped nitrogen (N 2 ) ices at 10 K to ionizing radiation in the form of energetic electrons. Online and in situ Fourier transform infrared spectroscopy was utilized to monitor the radiation-induced chemical processing of these ices. Along with isocyanic acid (HNCO), the products could be mainly derived from those formed in irradiated binary ices of the N 2 -CH 4 and CO-CH 4 systems: nitrogen-bearing products were found in the form of hydrogen cyanide (HCN), hydrogen isocyanide (HNC), diazomethane (CH 2 N 2 ), and its radical fragment (HCN 2 ); oxygen-bearing products were of acetaldehyde (CH 3 CHO), formyl radical (HCO), and formaldehyde (H 2 CO). As in the pure ices, the methyl radical (CH 3 ) and ethane (C 2 H 6 ) were also detected, as were carbon dioxide (CO 2 ) and the azide radical (N 3 ). Based on the temporal evolution of the newly formed products, kinetic reaction schemes were then developed to fit the temporal profiles of the newly formed species, resulting in numerical sets of rate constants. The current study highlights important constraints on the preferential formation of isocyanic acid (HNCO) over hydrogen cyanide (HCN) and hydrogen isocyanide (HNC), thus guiding the astrobiological and chemical evolution of those distant bodies.

Electrical characterization of MIM capacitor comprises an adamantane film at room temperature

Energy Technology Data Exchange (ETDEWEB)

Tiwari, Rajanish N., E-mail: rajanisht@gmail.com [Department of Physics and Astronomical Sciences, Central University of Himachal Pradesh, Dharmshala 176206 Kangra, H.P. India (India); Toyota Technological Institute, 2-12-1Hisakata, Tempaku-Ku, Nagoya 468-8511 (Japan); Yoshimura, Masamichi [Department of Physics and Astronomical Sciences, Central University of Himachal Pradesh, Dharmshala 176206 Kangra, H.P. India (India)

2016-06-15

We fabricated a new metal-insulator-metal capacitor at room temperature, comprising a ∼90 nm thin low–k adamantane film on a Si substrate. The surface morphology of deposited organic film was investigated by using scanning electron microscopy and Raman spectroscopy, which is confirmed that the adamantane thin film was uniformly distributed on the Si surface. The adamantane film exhibits a low leakage current density of 7.4 x 10{sup −7} A/cm{sup 2} at 13.5 V, better capacitance density of 2.14 fF/μm{sup 2} at 100 KHz.

Mycobacterium tuberculosis Lineage 4 comprises globally distributed and geographically restricted sublineages

Science.gov (United States)

Coscolla, Mireia; Liu, Qingyun; Trauner, Andrej; Fenner, Lukas; Rutaihwa, Liliana; Borrell, Sonia; Luo, Tao; Gao, Qian; Kato-Maeda, Midori; Ballif, Marie; Egger, Matthias; Macedo, Rita; Mardassi, Helmi; Moreno, Milagros; Tudo Vilanova, Griselda; Fyfe, Janet; Globan, Maria; Thomas, Jackson; Jamieson, Frances; Guthrie, Jennifer L.; Asante-Poku, Adwoa; Yeboah-Manu, Dorothy; Wampande, Eddie; Ssengooba, Willy; Joloba, Moses; Henry Boom, W.; Basu, Indira; Bower, James; Saraiva, Margarida; Vaconcellos, Sidra E. G.; Suffys, Philip; Koch, Anastasia; Wilkinson, Robert; Gail-Bekker, Linda; Malla, Bijaya; Ley, Serej D.; Beck, Hans-Peter; de Jong, Bouke C.; Toit, Kadri; Sanchez-Padilla, Elisabeth; Bonnet, Maryline; Gil-Brusola, Ana; Frank, Matthias; Penlap Beng, Veronique N.; Eisenach, Kathleen; Alani, Issam; Wangui Ndung’u, Perpetual; Revathi, Gunturu; Gehre, Florian; Akter, Suriya; Ntoumi, Francine; Stewart-Isherwood, Lynsey; Ntinginya, Nyanda E.; Rachow, Andrea; Hoelscher, Michael; Cirillo, Daniela Maria; Skenders, Girts; Hoffner, Sven; Bakonyte, Daiva; Stakenas, Petras; Diel, Roland; Crudu, Valeriu; Moldovan, Olga; Al-Hajoj, Sahal; Otero, Larissa; Barletta, Francesca; Jane Carter, E.; Diero, Lameck; Supply, Philip; Comas, Iñaki; Niemann, Stefan; Gagneux, Sebastien

2016-01-01

Generalist and specialist species differ in the breadth of their ecological niche. Little is known about the niche width of obligate human pathogens. Here we analyzed a global collection of Mycobacterium tuberculosis Lineage 4 clinical isolates, the most geographically widespread cause of human tuberculosis. We show that Lineage 4 comprises globally distributed and geographically restricted sublineages, suggesting a distinction between generalists and specialists. Population genomic analyses showed that while the majority of human T cell epitopes were conserved in all sublineages, the proportion of variable epitopes was higher in generalists. Our data further support a European origin for the most common generalist sublineage. Hence, the global success of Lineage 4 reflects distinct strategies adopted by different sublineages and the influence of human migration. PMID:27798628

Rod-shaped ion exchanger useful for purifying liquids or recovering components from liquids comprises a metal wire core surrounded by an ion-exchange resin

NARCIS (Netherlands)

Koopman, C.; Witkamp, G.J.

2002-01-01

Rod-shaped ion exchanger comprises a metal wire core surrounded by an ion-exchange resin. Independent claims are also included for: (1) a module comprising a housing with an inlet and outlet and one or more ion exchangers as above; (2) a process for producing an ion exchanger as above, comprising

Polythiophenes Comprising Conjugated Pendants for Polymer Solar Cells: A Review

Directory of Open Access Journals (Sweden)

Hsing-Ju Wang

2014-03-01

Full Text Available Polythiophene (PT is one of the widely used donor materials for solution-processable polymer solar cells (PSCs. Much progress in PT-based PSCs can be attributed to the design of novel PTs exhibiting intense and broad visible absorption with high charge carrier mobility to increase short-circuit current density (Jsc, along with low-lying highest occupied molecular orbital (HOMO levels to achieve large open circuit voltage (Voc values. A promising strategy to tailor the photophysical properties and energy levels via covalently attaching electron donor and acceptor pendants on PTs backbone has attracted much attention recently. The geometry, electron-donating capacity, and composition of conjugated pendants are supposed to be the crucial factors in adjusting the conformation, energy levels, and photovoltaic performance of PTs. This review will go over the most recent approaches that enable researchers to obtain in-depth information in the development of PTs comprising conjugated pendants for PSCs.

Solid polymer electrolyte composite membrane comprising plasma etched porous support

Science.gov (United States)

Liu, Han; LaConti, Anthony B.

2010-10-05

A solid polymer electrolyte composite membrane and method of manufacturing the same. According to one embodiment, the composite membrane comprises a rigid, non-electrically-conducting support, the support preferably being a sheet of polyimide having a thickness of about 7.5 to 15 microns. The support has a plurality of cylindrical pores extending perpendicularly between opposing top and bottom surfaces of the support. The pores, which preferably have a diameter of about 0.1 to 5 microns, are made by plasma etching and preferably are arranged in a defined pattern, for example, with fewer pores located in areas of high membrane stress and more pores located in areas of low membrane stress. The pores are filled with a first solid polymer electrolyte, such as a perfluorosulfonic acid (PFSA) polymer. A second solid polymer electrolyte, which may be the same as or different than the first solid polymer electrolyte, may be deposited over the top and/or bottom of the first solid polymer electrolyte.

Solid polymer electrolyte composite membrane comprising laser micromachined porous support

Science.gov (United States)

Liu, Han [Waltham, MA; LaConti, Anthony B [Lynnfield, MA; Mittelsteadt, Cortney K [Natick, MA; McCallum, Thomas J [Ashland, MA

2011-01-11

A solid polymer electrolyte composite membrane and method of manufacturing the same. According to one embodiment, the composite membrane comprises a rigid, non-electrically-conducting support, the support preferably being a sheet of polyimide having a thickness of about 7.5 to 15 microns. The support has a plurality of cylindrical pores extending perpendicularly between opposing top and bottom surfaces of the support. The pores, which preferably have a diameter of about 5 microns, are made by laser micromachining and preferably are arranged in a defined pattern, for example, with fewer pores located in areas of high membrane stress and more pores located in areas of low membrane stress. The pores are filled with a first solid polymer electrolyte, such as a perfluorosulfonic acid (PFSA) polymer. A second solid polymer electrolyte, which may be the same as or different than the first solid polymer electrolyte, may be deposited over the top and/or bottom of the first solid polymer electrolyte.

High-performance organic light-emitting diodes comprising ultrastable glass layers

Science.gov (United States)

Rodríguez-Viejo, Javier

2018-01-01

Organic light-emitting diodes (OLEDs) are one of the key solid-state light sources for various applications including small and large displays, automotive lighting, solid-state lighting, and signage. For any given commercial application, OLEDs need to perform at their best, which is judged by their device efficiency and operational stability. We present OLEDs that comprise functional layers fabricated as ultrastable glasses, which represent the thermodynamically most favorable and, thus, stable molecular conformation achievable nowadays in disordered solids. For both external quantum efficiencies and LT70 lifetimes, OLEDs with four different phosphorescent emitters show >15% enhancements over their respective reference devices. The only difference to the latter is the growth condition used for ultrastable glass layers that is optimal at about 85% of the materials’ glass transition temperature. These improvements are achieved through neither material refinements nor device architecture optimization, suggesting a general applicability of this concept to maximize the OLED performance, no matter which specific materials are used. PMID:29806029

Polyurethane Binder Systems for Polymer Bonded Explosives

Science.gov (United States)

2006-12-01

Propulsion (2005), Santiago , Chile . 8. Huang, C.-C., Hwu, W.-H., Cheng, C.-S., Shyy, I.-N., and Yang, K.-K., Study on Thermal Decomposition of Composite...water or amines to form ureas (Figure 2). R NCO R N C O H+ H2O O H R NH2 - CO2 R NCO R N C O NR’ H H ureaamine Figure 2. Reaction of an isocyanate...Monoisocyanates are present as impurities in low concentration in most diisocyanates. Table 1. Common diisocyanates Isocyanate Structure B.p. (ºC

A Re-configurable On-line Learning Spiking Neuromorphic Processor comprising 256 neurons and 128K synapses

Directory of Open Access Journals (Sweden)

Ning eQiao

2015-04-01

Full Text Available Implementing compact, low-power artificial neural processing systems with real-time on-line learning abilities is still an open challenge. In this paper we present a full-custom mixed-signal VLSI device with neuromorphic learning circuits that emulate the biophysics of real spiking neurons and dynamic synapses for exploring the properties of computational neuroscience models and for building brain-inspired computing systems. The proposed architecture allows the on-chip configuration of a wide range of network connectivities, including recurrent and deep networks with short-term and long-term plasticity. The device comprises 128 K analog synapse and 256 neuron circuits with biologically plausible dynamics and bi-stable spike-based plasticity mechanisms that endow it with on-line learning abilities. In addition to the analog circuits, the device comprises also asynchronous digital logic circuits for setting different synapse and neuron properties as well as different network configurations. This prototype device, fabricated using a 180 nm 1P6M CMOS process, occupies an area of 51.4 mm 2 , and consumes approximately 4 mW for typical experiments, for example involving attractor networks. Here we describe the details of the overall architecture and of the individual circuits and present experimental results that showcase its potential. By supporting a wide range of cortical-like computational modules comprising plasticity mechanisms, this device will enable the realization of intelligent autonomous systems with on-line learning capabilities.

Sensor devices comprising a metal-organic framework material and methods of making and using the same

Science.gov (United States)

Wang, Alan X.; Chang, Chih-hung; Kim, Ki-Joong; Chong, Xinyuan; Ohodnicki, Paul R.

2018-05-29

Disclosed herein are embodiments of sensor devices comprising a sensing component able to determine the presence of, detect, and/or quantify detectable species in a variety of environments and applications. The sensing components disclosed herein can comprise MOF materials, plasmonic nanomaterials, or combinations thereof. In an exemplary embodiment, light guides can be coupled with the sensing components described herein to provide sensor devices capable of increased NIR detection sensitivity in determining the presence of detectable species, such as gases and volatile organic compounds. In another exemplary embodiment, optical properties of the plasmonic nanomaterials combined with MOF materials can be monitored directly to detect analyte species through their impact on external conditions surrounding the particle or as a result of charge transfer to and from the plasmonic material as a result of interactions with the plasmonic material and/or the MOF material.

Polymer foam comprising a polymer and nanoparticles, and nanoparticles for the manufacture of such foam.

NARCIS (Netherlands)

Vancso, Gyula J.; Duvigneau, Joost; Nederkoorn, P.H.J.; Wassing, T.

2014-01-01

A polymer foam is produced comprising a polymer and nanoparticles having a maximum dimensionof 750 nm, which foam has cells with an average cell size of at most 1 µm and a cell density of at least 1012 cells/ml, wherein polymeric grafts have been attached to the nanoparticles. The nanoparticles may

Palladium catalyst system comprising zwitterion and/or acid-functionalized ionic liquid

DEFF Research Database (Denmark)

2011-01-01

The present invention concerns a catalyst system in particular a catalyst system comprising Palladium (Pd), a zwitterion and/or an acid-functionalized ionic liquid, and one or more phosphine ligands, wherein the Pd catalyst can be provided by a complex precursor, such as Pd(CH3COO)2, PdCI2, Pd(CH3......COCHCOCH3), Pd (CF3COO)2, Pd(PPh3)4 or Pd2(dibenzylideneacetone)3. Such catalyst systems can be used for e.g. alkoxycarbonylation reactions, carboxylation reactions, and/or in a co-polymerization reaction, e.g. in the production of methyl propionate and/or propanoic acid, optionally in processes forming...... methyl methacrylate and/or methacrylic acid. Catalyst systems according to the invention are suitable for reactions forming separable product and catalyst phases and supported ionic liquid phase SILP applications....

Preparation and characterization of biopolymers comprising chitosan-grafted-ENR via acid-induced reaction of ENR50 with chitosan

Directory of Open Access Journals (Sweden)

M. R. H. Mas Haris

2014-02-01

Full Text Available This paper describes the first detailed tailored-approach for the preparation of biopolymers comprising chitosan (CTS grafted onto the backbone of epoxidized natural rubber (CTS-g-ENR. In a typical experiment, appropriate amount of CTS and AlCl3•6H2O was added to a specified amount of ENR50 (ENR with about 50% epoxy content dissolved in a dual-solvent consisting of 1,4-dioxane and water (97.5:2.5% v/v and the resulting mixture refluxed with continuous stirring for 6 hours. Nuclear magnetic resonance (NMR spectral analysis of a biocomposite, CTS-g-ENR-P1, revealed that its epoxy content is 22.36% which is considerably lower than 44.93% as determined for ENR50-control (ENR50 derivative obtained under similar experimental condition but in the absence of CTS. This means that the grafting of CTS onto the backbone of ENR had occurred. The revelation is affirmed by the presence of the characteristic absorption bands of CTS and ENR, and the appearance of new bands at 1219, 902 and 733 cm–1 in the Fourier transform infrared (FTIR spectrum of CTS-g-ENR-P1. Further evidence that CTS had been successfully grafted onto the backbone of ENR can be deduced and described in this paper from the data obtained by means of Differential Scanning Calorimetric analysis, Thermogravimetric analysis and Variable Pressure Scanning Electron Microscopy.

Coordinated operation of a neighborhood of smart households comprising electric vehicles, energy storage and distributed generation

NARCIS (Netherlands)

Paterakis, N.G.; Erdinc, O.; Pappi, I.N.; Bakirtzis, A.G.; Catalao, J.P.S.

2016-01-01

In this paper, the optimal operation of a neighborhood of smart households in terms of minimizing the total energy procurement cost is analyzed. Each household may comprise several assets such as electric vehicles, controllable appliances, energy storage and distributed generation. Bi-directional

Bioalerts: a python library for the derivation of structural alerts from bioactivity and toxicity data sets.

Science.gov (United States)

Cortes-Ciriano, Isidro

2016-01-01

Assessing compound toxicity at early stages of the drug discovery process is a crucial task to dismiss drug candidates likely to fail in clinical trials. Screening drug candidates against structural alerts, i.e. chemical fragments associated to a toxicological response prior or after being metabolized (bioactivation), has proved a valuable approach for this task. During the last decades, diverse algorithms have been proposed for the automatic derivation of structural alerts from categorical toxicity data sets. Here, the python library bioalerts is presented, which comprises functionalities for the automatic derivation of structural alerts from categorical (dichotomous), e.g. toxic/non-toxic, and continuous bioactivity data sets, e.g. [Formula: see text] or [Formula: see text] values. The library bioalerts relies on the RDKit implementation of the circular Morgan fingerprint algorithm to compute chemical substructures, which are derived by considering radial atom neighbourhoods of increasing bond radius. In addition to the derivation of structural alerts, bioalerts provides functionalities for the calculation of unhashed (keyed) Morgan fingerprints, which can be used in predictive bioactivity modelling with the advantage of allowing for a chemically meaningful deconvolution of the chemical space. Finally, bioalerts provides functionalities for the easy visualization of the derived structural alerts.

Light source comprising a common substrate, a first led device and a second led device

Science.gov (United States)

Choong, Vi-En

2010-02-23

At least one stacked organic or polymeric light emitting diode (PLEDs) devices to comprise a light source is disclosed. At least one of the PLEDs includes a patterned cathode which has regions which transmit light. The patterned cathodes enable light emission from the PLEDs to combine together. The light source may be top or bottom emitting or both.

Combination Comprising Parthenolide For Use In The Treatment Of Alzheimer's Disease And Other Neurodegenerative Disorders

KAUST Repository

Bajic, Vladimir B.

2015-06-18

The present invention generally concerns particular methods and compositions for treatment of a neurodegenerative disease, such as Alzheimer\\'s Disease. In particular embodiments, there is a composition comprising Parthenolide and a second agent, including an inhibitor of TLR4/MD-2/CD14, nAChR agonist, Resatorvid, Curcumin, Tilorone or a Tilorone analog, or a combination thereof.

New method to measure the carbamoylating activity of nitrosoureas by electron paramagnetic resonance spectroscopy.

Science.gov (United States)

Gadzheva, V; Ichimori, K; Raikov, Z; Nakazawa, H

1997-08-01

A new method for measuring the carbamoylating activity of nitrosoureas and isocyanates using electron paramagnetic resonance (EPR) spectroscopy is described. The extent and time course of carbamoylation reaction of chloroethyl isocyanate and a series of 9 nitrosoureas toward amino group of 4-amino-2,2,6,6-tetramethyl-piperidine-1-oxyl were examined with both the EPR method and the HPLC method which has been proposed by Brubaker et al. [Biochem. Pharmacol. 35:2359 (1986)]. Spin-labeled nitrosoureas we synthesized are included in this study since they have less toxicity or more efficiency than commercially available drug in some cases. The concentration of carbamoylated product was easily determined with the EPR spectra. There is a very high correlation (r = 0.982, t = 2.58, N = 10, p nitrosoureas showed lower carbamoylating activity than non-labeled analogues. The carbamoylating activity for these nitrosourea depended on the reactivity of isocyanate intermediate and almost independent of their half life. This rapid and simple EPR method is suitable for the detailed investigation of the rate and extent of carbamoylation reaction.

Article comprising a garment or other textile structure for use in controlling body temperature

Science.gov (United States)

Butzer, Melissa J.

2000-01-01

There is disclosed an article for use in cooling body temperature which comprises a garment having a coat and pant, with each having a body section adapted to receive a portion of the torso of the wearer and extensions from the body section to receive the wearer's limbs. The garment includes a system for circulating temperature controlling fluid from a suitable source through patches removably received in pockets in each of body section and extensions.

Exploring the learnings derived from catalytic experiences in a leadership context

Directory of Open Access Journals (Sweden)

Daphna S. Horowitz

2015-06-01

Full Text Available Orientation: Personal leadership comprises self-awareness, authenticity, inspiration and passion. The concept of personal leadership was explored together with its relationship with leadership-related learnings derived from a catalytic experience. Research purpose: The objective of the study was to explore the leadership-related learnings derived from a catalytic experience and any connection between these learnings, personal leadership and leadership in an organisational context. Motivation for the study: Measurement of leaders’ performance remains largely focused on the results achieved. The importance of personal leadership in the corporate environment is often ignored and even questioned. Recognising that there is a relationship between personal leadership and professional leadership enables leaders to connect who they are being and what they are doing. This can enhance their leadership. Research design, approach and method: The study was conducted using a qualitative approach, specifically narrative enquiry. The sample comprised seven leaders who have had catalytic experiences in their lives. In-depth interviews were conducted and thematic analysis was used to identify themes on the leadership-related learnings gained from the leaders’catalytic experiences. Main findings: Elements of personal leadership and the processes involved in the development of personal leadership were identified. It was furthermore shown that challenging experiences serve as learning opportunities and that time for reflection is essential in this learning process. Practical/managerial implications: Leadership lessons are best learnt through experience.Using challenging experiences as learning opportunities may assist leaders in their growth and development. Contribution: Leadership effectiveness and organisational effectiveness may be enhanced by a more holistic view of leadership that includes elements of personal leadership.

Method of preparing an Al-Ti-B grain refiner for aluminium-comprising products, and a method of casting aluminium products

OpenAIRE

Brinkman, H.J.; Duszczyk, J.; Katgerman, L.

1999-01-01

The invention relates to a method of preparing an Al-Ti-B grain refiner for cast aluminium-comprising products. According to the invention the preparation is realized by mixing powders selected from the group comprising aluminium, titanium, boron, and alloys and intermetallic compounds thereof, compressing, heating in an inert environment until an exothermic reaction is initiated and cooling. It has been shown that when the grain refiner thus prepared is applied, the quality of cast products ...

A rapid approach for automated comparison of independently derived stream networks

Science.gov (United States)

Stanislawski, Larry V.; Buttenfield, Barbara P.; Doumbouya, Ariel T.

2015-01-01

This paper presents an improved coefficient of line correspondence (CLC) metric for automatically assessing the similarity of two different sets of linear features. Elevation-derived channels at 1:24,000 scale (24K) are generated from a weighted flow-accumulation model and compared to 24K National Hydrography Dataset (NHD) flowlines. The CLC process conflates two vector datasets through a raster line-density differencing approach that is faster and more reliable than earlier methods. Methods are tested on 30 subbasins distributed across different terrain and climate conditions of the conterminous United States. CLC values for the 30 subbasins indicate 44–83% of the features match between the two datasets, with the majority of the mismatching features comprised of first-order features. Relatively lower CLC values result from subbasins with less than about 1.5 degrees of slope. The primary difference between the two datasets may be explained by different data capture criteria. First-order, headwater tributaries derived from the flow-accumulation model are captured more comprehensively through drainage area and terrain conditions, whereas capture of headwater features in the NHD is cartographically constrained by tributary length. The addition of missing headwaters to the NHD, as guided by the elevation-derived channels, can substantially improve the scientific value of the NHD.

Semiconductor sensor device, diagnostic instrument comprising such a device and method of manufacturing such a device

NARCIS (Netherlands)

2010-01-01

The invention relates to a semiconductor sensor device (10) for sensing a substance comprising at least one mesa- shaped semiconductor region (11) which is formed on a surface of a semiconductor body (12) and which is connected at a first end to a first electrically conducting connection region (13)

Composites comprising novel RTIL-based polymers, and methods of making and using same

Science.gov (United States)

Gin, Douglas; Carlisle, Trevor; Noble, Richard; Nicodemus, Garret; McDanel, William; Cowan, Matthew

2017-06-27

The invention includes compositions comprising curable imidazolium-functionalized poly(room-temperature ionic liquid) copolymers and homopolymers. The invention further includes methods of preparing and using the compositions of the invention. The invention further includes novel methods of preparing thin, supported, room-temperature ionic liquid-containing polymeric films on a porous support. In certain embodiments, the methods of the invention avoid the use of a gutter layer, which greatly reduces the overall gas permeance and selectivity of the composite membrane. In other embodiments, the films of the invention have increased gas selectivity and permeance over films prepared using methods described in the prior art.

HVDC Solution for Offshore Wind Park Comprising Turbines Equipped with Full-Range Converters

DEFF Research Database (Denmark)

Sharma, Ranjan; Rasmussen, Tonny Wederberg; Jensen, Kim Høj

2010-01-01

a voltage drop is created at the collection grid, the wind turbines go into fault-ride-through mode. The power output from each of the wind turbines is thus reduced to balance the system power. The detailed explanation of the strategy is presented in the paper. Matlab simulation model was prepared and some...... of a HVDC transmission system. The power system under study includes an offshore wind farm comprising turbines equipped with full range converters. The collection network is a local AC grid. Power transmission is done through HVDC system. The grid side VSC (voltage source converter) controls the DC voltage...

A spatial-spectral approach for deriving high signal quality eigenvectors for remote sensing image transformations

DEFF Research Database (Denmark)

Rogge, Derek; Bachmann, Martin; Rivard, Benoit

2014-01-01

Spectral decorrelation (transformations) methods have long been used in remote sensing. Transformation of the image data onto eigenvectors that comprise physically meaningful spectral properties (signal) can be used to reduce the dimensionality of hyperspectral images as the number of spectrally...... distinct signal sources composing a given hyperspectral scene is generally much less than the number of spectral bands. Determining eigenvectors dominated by signal variance as opposed to noise is a difficult task. Problems also arise in using these transformations on large images, multiple flight...... and spectral subsampling to the data, which is accomplished by deriving a limited set of eigenvectors for spatially contiguous subsets. These subset eigenvectors are compiled together to form a new noise reduced data set, which is subsequently used to derive a set of global orthogonal eigenvectors. Data from...

Composites comprising silicon carbide fibers dispersed in magnesia-aluminate matrix and fabrication thereof and of other composites by sinter forging

Science.gov (United States)

Panda, Prakash C.; Seydel, Edgar R.; Raj, Rishi

1989-10-03

A novel ceramic-ceramic composite of a uniform dispersion of silicon carbide fibers in a matrix of MgO.multidot.nAl.sub.2 O.sub.3 wherein n ranges from about 1 to about 4.5, said composite comprising by volume from 1 to 50% silicon carbide fibers and from 99 to 50% MgO.multidot.nAl.sub.2 O.sub.3. The composite is readily fabricated by forming a powder comprising a uniform dispersion of silicon carbide fibers in poorly crystalline phase comprising MgO and Al.sub.2 O.sub.3 in a mole ratio of n and either (a) hot pressing or preferably (b) cold pressing to form a preform and then forging utilizing a temperature in the range of 1100.degree. C. to 1900.degree. C. and a strain rate ranging from about 10.sup.-5 seconds .sup.-1 to about 1 seconds .sup.-1 so that surfaces cracks do not appear to obtain a shear deformation greater than 30%.

Observations on human smooth muscle cell cultures from hyperplastic lesions of prosthetic bypass grafts: Production of a platelet-derived growth factor-like mitogen and expression of a gene for a platelet-derived growth factor receptor--a preliminary study

International Nuclear Information System (INIS)

Birinyi, L.K.; Warner, S.J.; Salomon, R.N.; Callow, A.D.; Libby, P.

1989-01-01

Prosthetic bypass grafts placed to the distal lower extremity often fail because of an occlusive tissue response in the perianastomotic region. The origin of the cells that comprise this occlusive lesion and the causes of the cellular proliferation are not known. To increase our understanding of this process we cultured cells from hyperplastic lesions obtained from patients at the time of reexploration for lower extremity graft failure, and we studied their identity and growth factor production in tissue culture. These cultures contain cells that express muscle-specific actin isoforms, shown by immunohistochemical staining, consistent with vascular smooth muscle origin. These cultures also released material that stimulated smooth muscle cell growth. A portion of this activity was similar to platelet-derived growth factor, since preincubation with antibody-to-human platelet-derived growth factor partially blocked the mitogenic effect of medium conditioned by human anastomotic hyperplastic cells. These conditioned media also contained material that competed with platelet-derived growth factor for its receptor, as measured in a radioreceptor assay. Northern blot analysis showed that these cells contain messenger RNA that encodes the A chain but not the B chain of platelet-derived growth factor. In addition, these cells contain messenger RNA that encodes a platelet-derived growth factor receptor. We conclude that cultured smooth muscle cells from human anastomotic hyperplastic lesions express genes for platelet-derived growth factor A chain and a platelet-derived growth factor receptor and secrete biologically active molecules similar to platelet-derived growth factor

Synthesis of Polyurethane/Silica Modified Epoxy Polymer Based on 1,3-Propanediol for Coating Application

Directory of Open Access Journals (Sweden)

Lutviasari Nuraini

2017-11-01

Full Text Available Studies on the synthesis of polyurethane/silica modified epoxy polymer using 1,3-propanediol has been conducted. Synthesis of polymers made by reaction of tolonate and 1,3-propanediol (ratio NCO/OH=2.5 as the building blocks of polyurethane with diglycidyl ether bisphenol A (DGEBA epoxy and catalyst dibutyltin dilaurate (DBTL.The total weight of the polyurethane used was 20% (w/w of the total epoxy. Based on Fourier Transform Infrared (FTIR and 1H-Nuclear Magnetic Resonance (1H-NMR spectra indicated the existence of a new bond that is formed from the reaction of isocyanate group and hydroxyl group, where the hydroxyl groups derived from epoxy and 1,3-propanediol. The addition of silica (5, 10, and 15% w/w to epoxy into the epoxy-modified polyurethane has been carried out through sol-gel reaction of tetraethyl orthosilicate (TEOS. The isocyanate conversion rate for the addition of silica 5, 10, and 15% are 95.69; 100, and 100%, respectively. The morphology and element identification by Scanning Electron Microscopy/Energy Dispersive X-Ray Analysis (SEM/EDX, showed that Si element has been successfully added in the polymer. From the tensile strength and elongation analysis, also thermal stability analysis using Thermal Gravimetric Analyzer (TGA, the increase of silica amount into the polyurethane modified epoxy did not significantly affect to thermal properties, but decrease the tensile strength of the polymer.

RNA-Seq of the nucleolus reveals abundant SNORD44-derived small RNAs.

Directory of Open Access Journals (Sweden)

Baoyan Bai

Full Text Available Small non-coding RNAs represent RNA species that are not translated to proteins, but which have diverse and broad functional activities in physiological and pathophysiological states. The knowledge of these small RNAs is rapidly expanding in part through the use of massive parallel (deep sequencing efforts. We present here the first deep sequencing of small RNomes in subcellular compartments with particular emphasis on small RNAs (sRNA associated with the nucleolus. The vast majority of the cellular, cytoplasmic and nuclear sRNAs were identified as miRNAs. In contrast, the nucleolar sRNAs had a unique size distribution consisting of 19-20 and 25 nt RNAs, which were predominantly composed of small snoRNA-derived box C/D RNAs (termed as sdRNA. Sequences from 47 sdRNAs were identified, which mapped to both 5' and 3' ends of the snoRNAs, and retained conserved box C or D motifs. SdRNA reads mapping to SNORD44 comprised 74% of all nucleolar sdRNAs, and were confirmed by Northern blotting as comprising both 20 and 25 nt RNAs. A novel 120 nt SNORD44 form was also identified. The expression of the SNORD44 sdRNA and 120 nt form was independent of Dicer/Drosha-mediated processing pathways but was dependent on the box C/D snoRNP proteins/sno-ribonucleoproteins fibrillarin and NOP58. The 120 nt SNORD44-derived RNA bound to fibrillarin suggesting that C/D sno-ribonucleoproteins are involved in regulating the stability or processing of SNORD44. This study reveals sRNA cell-compartment specific expression and the distinctive unique composition of the nucleolar sRNAs.

Formulation comprising silicon microparticles, as a pigment that can absorb visible UV radiation and reflect ir radiation

OpenAIRE

Rodríguez, Marie-Isabelle; Fenollosa Esteve, Roberto; Meseguer, Francisco

2011-01-01

[EN] The invention relates to a formulation characterised in that it comprises silicon microparticles having a size between 0.010 um and 50 um in diameter, and to the use thereof as a pigment that can absorb visible UV radiation and reflect IR radiation.

EFFECTIVENESS OF CAPITAL MARKET DERIVATIVES IN HOUSING DELIVERY OF NIGERIA EMERGING MARKET

Directory of Open Access Journals (Sweden)

Bernard Adjekophori

2016-07-01

Full Text Available The capital market is unarguably the most robust institution in any economy notable for mobilizing the necessary fund for financing long-term productive project. It controls relatively large amounts of capital and represent the largest institutional providing long-term credits for capital project like real estate that requires huge capital outlay. This study therefore, attempts an investigation into the effectiveness of capital market derivatives in housing delivery in Lagos. An empirical survey research was conducted in Lagos, using a random sampling technique with a structured questionnaire to collect data from 147 respondents comprising 89 stockbrokers and 58 real estate developers in Lagos mega-city. Data collected were analyzed with SPSS using descriptive and inferential statistics. The result revealed that 56.7% of the observed variations in housing delivery (R2= 0.567; p< 0.05 is explained by capital market derivatives, which suggests that, proper utilization of capital market derivatives will enhance and improve housing delivery in Nigeria. However, this is not been adequately used by developers of real estate projects in the study. Thus, the study recommends amongst other remedial steps that a synergetic effort should be created between the capital market and real estate developers which will enhance effective housing delivery, the development of people and the Nation.

Alternation vs. Allomorphic Variation in Old English Word-Formation: Evidence from the Derivational Paradigm of Strong Verbs

Directory of Open Access Journals (Sweden)

Urraca Carmen Novo

2015-01-01

Full Text Available This article addresses the question of Old English alternations with a view to identifying instances of allomorphic variation attributable to the loss of motivation and the subsequent morphologization of alternations. The focus is on the strong verb and its derivatives, in such a way that the alternations in which the strong verb partakes can be predicted on the basis of phonological principles, whereas allomorphic variation with respect to the strong verb base is unpredictable. Out of 304 derivational paradigms based on strong verbs and comprising 4,853 derivatives, 478 instances have been found of phonologically motivated vocalic alternations. The conclusion is reached that the most frequent alternations are those that have /a/ as source and those with /y/ as target, because /a/ is the point of departure of i-mutation and /y/ its point of arrival. Sixteen instances of allomorphic variation have also been found, of which /e/ ~ /eo/, /e/ ~ /ea/ and /i/ ~ /e/ are relatively frequent.

Characterization and immunomodulatory activity of polysaccharides derived from Dendrobium tosaense.

Science.gov (United States)

Yang, Li-Chan; Lu, Ting-Jang; Hsieh, Chang-Chi; Lin, Wen-Chuan

2014-10-13

Dendrobium tosaense is a medicinal Dendrobium species widely used in traditional medicine. This study demonstrated some structural characterizations and immunomodulatory activity of the water-soluble polysaccharides derived from the stem of D. tosaense (DTP). DTP was fractioned using DEAE-650 M anion-exchange gel filtration chromatography, producing one neutral polysaccharide fraction (DTP-N), which was investigated for its structural characteristics, using HPAEC-PAD, HP-SEC, GC-MS, and NMR spectroscopy. DTP and DTP-N consisted of galactose, glucose, and mannose in ratios of 1:9.1:150.7 and 1:12.2:262.5, respectively. DTP-N comprised (1 → 4)Man as its main backbone, and its average molecular weight was 220 kDa. We also investigated the immunomodulatory effects of DTP administered orally to BALB/c mice for 3 weeks. DTP substantially boosted the population of splenic natural killer (NK) cells, NK cytotoxicity, macrophage phagocytosis, and cytokine induction in splenocytes. This is the first study to demonstrate the structural characteristics of an active polysaccharide derived from D. tosaense and its immunopharmacological effects in vivo. Copyright © 2014 Elsevier Ltd. All rights reserved.

Chemically modified cellulose paper as a thin film microextraction phase.

Science.gov (United States)

Saraji, Mohammad; Farajmand, Bahman

2013-11-01

In this paper, chemically modified cellulose paper was introduced as a novel extracting phase for thin film microextraction (TFME). Different reagents (Octadecyltrichlorosilane, diphenyldichlorosilane, cyclohexyl isocyanate and phenyl isocyanate) were used to modify the cellulose papers. The modified papers were evaluated as a sorbent for the extraction of some synthetic and natural estrogenic hormones (17α-ethynylestradiol, estriol and estradiol) from aqueous samples. Liquid chromatography-fluorescence detection was used for the quantification of the extracted compounds. The cellulose paper modified with phenyl isocyanate showed the best affinity to the target compounds. TEME parameters such as desorption condition, shaking rate, sample ionic strength and extraction time were investigated and optimized. Limit of detections were between 0.05 and 0.23μgL(-1) and relative standard deviations were less than 11.1% under the optimized condition. The calibration curves were obtained in the range of 0.2-100μgL(-1) with a good linearity (r(2)>0.9935). Wastewater, human urine, pool and river water samples were studied as real samples for the evaluation of the method. Relative recoveries were found to be between 75% and 101%. Copyright © 2013 Elsevier B.V. All rights reserved.

Deriving inflation forecasts from government bond prices

Directory of Open Access Journals (Sweden)

Kožul Nataša

2014-01-01

Full Text Available In financial research and practice, it is widely accepted that nominal interest rates derived from the prices of various financial products of different maturities comprise of corresponding real interest rates and inflation. While extensive research has been conducted on the relationship between these three variables, estimation of their levels is still largely based on the industry surveys and market data. As this information only indicates the current expectations of interest rate and inflation movements over time, a number of caveats should be noted when interpreting such measures. In the US and the UK, where the government bond markets are the largest and most active, a comparative analysis between conventional government bonds and those whose yield is linked to inflation provides a measure of inflation expectations. However, as such analyses implicitly assume that investment in government bonds is virtually risk free, it is questionable whether the derived estimates are of any value in current economic conditions. Moreover, this approach cannot be generalized to other countries, where number of traded products from which any relationship between interest rates and inflation can be determined is limited and different economic conditions prevail. Thus, this paper aims to present an overview of the methodologies used to forecast inflation rates from government bond prices, drawing attention to the key assumptions and limitations of these approaches. The goal is to ascertain their accuracy, and thus their value in determining the real yields of various interest rate-linked products.

Nucleic acids encoding phloem small RNA-binding proteins and transgenic plants comprising them

Science.gov (United States)

Lucas, William J.; Yoo, Byung-Chun; Lough, Tony J.; Varkonyi-Gasic, Erika

2007-03-13

The present invention provides a polynucleotide sequence encoding a component of the protein machinery involved in small RNA trafficking, Cucurbita maxima phloem small RNA-binding protein (CmPSRB 1), and the corresponding polypeptide sequence. The invention also provides genetic constructs and transgenic plants comprising the polynucleotide sequence encoding a phloem small RNA-binding protein to alter (e.g., prevent, reduce or elevate) non-cell autonomous signaling events in the plants involving small RNA metabolism. These signaling events are involved in a broad spectrum of plant physiological and biochemical processes, including, for example, systemic resistance to pathogens, responses to environmental stresses, e.g., heat, drought, salinity, and systemic gene silencing (e.g., viral infections).

Function and anatomy of plant siRNA pools derived from hairpin transgenes

Directory of Open Access Journals (Sweden)

Lee Kevin AW

2007-11-01

Full Text Available Abstract Background RNA interference results in specific gene silencing by small-interfering RNAs (siRNAs. Synthetic siRNAs provide a powerful tool for manipulating gene expression but high cost suggests that novel siRNA production methods are desirable. Strong evolutionary conservation of siRNA structure suggested that siRNAs will retain cross-species function and that transgenic plants expressing heterologous siRNAs might serve as useful siRNA bioreactors. Here we report a detailed evaluation of the above proposition and present evidence regarding structural features of siRNAs extracted from plants. Results Testing the gene silencing capacity of plant-derived siRNAs in mammalian cells proved to be very challenging and required partial siRNA purification and design of a highly sensitive assay. Using the above assay we found that plant-derived siRNAs are ineffective for gene silencing in mammalian cells. Plant-derived siRNAs are almost exclusively double-stranded and most likely comprise a mixture of bona fide siRNAs and aberrant partially complementary duplexes. We also provide indirect evidence that plant-derived siRNAs may contain a hitherto undetected physiological modification, distinct from 3' terminal 2-O-methylation. Conclusion siRNAs produced from plant hairpin transgenes and extracted from plants are ineffective for gene silencing in mammalian cells. Thus our findings establish that a previous claim that transgenic plants offer a cost-effective, scalable and sustainable source of siRNAs is unwarranted. Our results also indicate that the presence of aberrant siRNA duplexes and possibly a plant-specific siRNA modification, compromises the gene silencing capacity of plant-derived siRNAs in mammalian cells.

Global Derivatives

DEFF Research Database (Denmark)

Andersen, Torben Juul

approaches to dealing in the global business environment." - Sharon Brown-Hruska, Commissioner, Commodity Futures Trading Commission, USA. "This comprehensive survey of modern risk management using derivative securities is a fine demonstration of the practical relevance of modern derivatives theory to risk......" provides comprehensive coverage of different types of derivatives, including exchange traded contracts and over-the-counter instruments as well as real options. There is an equal emphasis on the practical application of derivatives and their actual uses in business transactions and corporate risk...... management situations. Its key features include: derivatives are introduced in a global market perspective; describes major derivative pricing models for practical use, extending these principles to valuation of real options; practical applications of derivative instruments are richly illustrated...

Functions of Müller cell-derived vascular endothelial growthfactor in diabetic retinopathy

Institute of Scientific and Technical Information of China (English)

2015-01-01

Müller cells are macroglia and play many essentialroles as supporting cells in the retina. To respond topathological changes in diabetic retinopathy （DR）, amajor complication in the eye of diabetic patients,retinal Müller glia produce a high level of vascularendothelial growth factor （VEGF or VEGF-A）. As VEGFis expressed by multiple retinal cell-types and Müllerglia comprise only a small portion of cells in the retina,it has been a great challenge to reveal the function ofVEGF or other globally expressed proteins produced byMüller cells. With the development of conditional genetargeting tools, it is now possible to dissect the functionof Müller cell-derived VEGF in vivo . By using conditionalgene targeting approach, we demonstrate that Müllerglia are a major source of retinal VEGF in diabetic miceand Müller cell-derived VEGF plays a significant role inthe alteration of protein expression and peroxynitration,which leads to retinal inflammation, neovascularization,vascular leakage, and vascular lesion, key pathologicalchanges in DR. Therefore, Müller glia are a potentialcellular target for the treatment of DR, a leading causeof blindness.

DC-driven plasma gun: self-oscillatory operation mode of atmospheric-pressure helium plasma jet comprised of repetitive streamer breakdowns

Science.gov (United States)

Wang, Xingxing; Shashurin, Alexey

2017-02-01

This paper presents and studies helium atmospheric pressure plasma jet comprised of a series of repetitive streamer breakdowns, which is driven by pure DC high voltage (self-oscillatory behavior). The repetition frequency of the breakdowns is governed by the geometry of discharge electrodes/surroundings and gas flow rate. Each next streamer is initiated when the electric field on the anode tip recovers after the previous breakdown and reaches the breakdown threshold value of about 2.5 kV cm-1. One type of the helium plasma gun designed using this operational principle is demonstrated. The gun operates on about 3 kV DC high voltage and is comprised of the series of the repetitive streamer breakdowns at a frequency of about 13 kHz.

Biology-Oriented Syntheses (BIOS) of Novel Santonic-1,3,4-oxadiazole Derivatives under Microwave-Irradiation and their Antimicrobial Activity

International Nuclear Information System (INIS)

Salar, U.; Khan, K. M.; Naz, F.; Siddiqui, N. I.

2015-01-01

Novel 2-thio substituted 1,3,4-oxadiazole derivatives of santonic acid (13-18) were synthesized. The synthesis of these derivatives was comprised of six steps which start from the basic hydrolysis of santonin 1 to the santoninic acid 2 followed by in situ rearrangement of 2 into santonic acid 3. Santonic acid 3 was then converted into its acyl imidazole derivative 4 followed by hydrazinolysis to give santonic carbohydrazide 5 which was further converted into santonic-1,3,4-oxadiazole-2-thiol 6. Santonic-1,3,4-oxadiazole-2-thiol 6 was alkylated to afford 2-thio substituted 1,3,4-oxadiazole derivatives of santonic acid (13-18). All the synthetic steps were carried out under microwave irradiation in controlled parameters. Compounds 13-18 along with intervening intermediates 5 and 6 were evaluated for their antimicrobial potential. Compound 14 showed appreciably good activity against Staphylococcus epidermidis. On the other hand compounds 6 and 17 demonstrated good activity against Escherichia coli and Shigella flexeneri, respectively. Compound 6 showed good antifungal activity. The synthesized compounds were characterized by different spectroscopy techniques. (author)

Role of Stress-Related Brain-Derived Neurotrophic Factor (BDNF) in the Rat Submandibular Gland

International Nuclear Information System (INIS)

Tsukinoki, Keiichi; Saruta, Juri

2012-01-01

The nerve growth factor (NGF) family comprises NGF, brain-derived neurotrophic factor (BDNF) and neurotrophins (NTs)-3, -4/5, -6 and -7, all of which are collectively referred to as neurotrophins. However, the expression of neurotrophins other than NGF in the salivary gland has not been described in detail. Through interaction with the TrkB receptor, BDNF plays an important role in long-term potentiation. We found that BDNF expression increased within submandibular gland tissue in response to stress, suggesting that the salivary glands are sensitive to stress. In addition, stress caused increases in plasma BDNF derived from the submandibular gland and in TrkB receptor mRNA in the adrenal medulla. Plasma BDNF might activate TrkB receptors in the adrenal medulla during acute stress. The salivary glands are likely to influence not only oral health, but also systemic organs. This review addressed the relationship between hormone-like effects and stress-related BDNF expression in the rat submandibular gland

Nanoscale Cross-Point Resistive Switching Memory Comprising p-Type SnO Bilayers

KAUST Repository

Hota, Mrinal Kanti

2015-02-23

Reproducible low-voltage bipolar resistive switching is reported in bilayer structures of p-type SnO films. Specifically, a bilayer homojunction comprising SnOx (oxygen-rich) and SnOy (oxygen-deficient) in nanoscale cross-point (300 × 300 nm2) architecture with self-compliance effect is demonstrated. By using two layers of SnO film, a good memory performance is obtained as compared to the individual oxide films. The memory devices show resistance ratio of 103 between the high resistance and low resistance states, and this difference can be maintained for up to 180 cycles. The devices also show good retention characteristics, where no significant degradation is observed for more than 103 s. Different charge transport mechanisms are found in both resistance states, depending on the applied voltage range and its polarity. The resistive switching is shown to originate from the oxygen ion migration and subsequent formation/rupture of conducting filaments.

Analyses of carnivore microsatellites and their intimate association with tRNA-derived SINEs.

Science.gov (United States)

López-Giráldez, Francesc; Andrés, Olga; Domingo-Roura, Xavier; Bosch, Montserrat

2006-10-23

The popularity of microsatellites has greatly increased in the last decade on account of their many applications. However, little is currently understood about the factors that influence their genesis and distribution among and within species genomes. In this work, we analyzed carnivore microsatellite clones from GenBank to study their association with interspersed repeats and elucidate the role of the latter in microsatellite genesis and distribution. We constructed a comprehensive carnivore microsatellite database comprising 1236 clones from GenBank. Thirty-three species of 11 out of 12 carnivore families were represented, although two distantly related species, the domestic dog and cat, were clearly overrepresented. Of these clones, 330 contained tRNALys-derived SINEs and 357 contained other interspersed repeats. Our rough estimates of tRNA SINE copies per haploid genome were much higher than published ones. Our results also revealed a distinct juxtaposition of AG and A-rich repeats and tRNALys-derived SINEs suggesting their coevolution. Both microsatellites arose repeatedly in two regions of the interspersed repeat. Moreover, microsatellites associated with tRNALys-derived SINEs showed the highest complexity and less potential instability. Our results suggest that tRNALys-derived SINEs are a significant source for microsatellite generation in carnivores, especially for AG and A-rich repeat motifs. These observations indicate two modes of microsatellite generation: the expansion and variation of pre-existing tandem repeats and the conversion of sequences with high cryptic simplicity into a repeat array; mechanisms which are not specific to tRNALys-derived SINEs. Microsatellite and interspersed repeat coevolution could also explain different distribution of repeat types among and within species genomes.Finally, due to their higher complexity and lower potential informative content of microsatellites associated with tRNALys-derived SINEs, we recommend avoiding

Analyses of carnivore microsatellites and their intimate association with tRNA-derived SINEs

Directory of Open Access Journals (Sweden)

Bosch Montserrat

2006-10-01

Full Text Available Abstract Background The popularity of microsatellites has greatly increased in the last decade on account of their many applications. However, little is currently understood about the factors that influence their genesis and distribution among and within species genomes. In this work, we analyzed carnivore microsatellite clones from GenBank to study their association with interspersed repeats and elucidate the role of the latter in microsatellite genesis and distribution. Results We constructed a comprehensive carnivore microsatellite database comprising 1236 clones from GenBank. Thirty-three species of 11 out of 12 carnivore families were represented, although two distantly related species, the domestic dog and cat, were clearly overrepresented. Of these clones, 330 contained tRNALys-derived SINEs and 357 contained other interspersed repeats. Our rough estimates of tRNA SINE copies per haploid genome were much higher than published ones. Our results also revealed a distinct juxtaposition of AG and A-rich repeats and tRNALys-derived SINEs suggesting their coevolution. Both microsatellites arose repeatedly in two regions of the insterspersed repeat. Moreover, microsatellites associated with tRNALys-derived SINEs showed the highest complexity and less potential instability. Conclusion Our results suggest that tRNALys-derived SINEs are a significant source for microsatellite generation in carnivores, especially for AG and A-rich repeat motifs. These observations indicate two modes of microsatellite generation: the expansion and variation of pre-existing tandem repeats and the conversion of sequences with high cryptic simplicity into a repeat array; mechanisms which are not specific to tRNALys-derived SINEs. Microsatellite and interspersed repeat coevolution could also explain different distribution of repeat types among and within species genomes. Finally, due to their higher complexity and lower potential informative content of microsatellites

Co2 chemosorption by functionalized amino acid derivatives

DEFF Research Database (Denmark)

2015-01-01

The absorption and desorption behaviour of carbon dioxide (CO2) using a composition comprising an ionic compound comprising a cation [A+] and an anion [B-] is described, wherein the anion [B-] is a mono-amine functionalized amino acid.......The absorption and desorption behaviour of carbon dioxide (CO2) using a composition comprising an ionic compound comprising a cation [A+] and an anion [B-] is described, wherein the anion [B-] is a mono-amine functionalized amino acid....

Approximate *-derivations and approximate quadratic *-derivations on C*-algebras

Directory of Open Access Journals (Sweden)

Park Choonkil

2011-01-01

Full Text Available Abstract In this paper, we prove the stability of *-derivations and of quadratic *-derivations on Banach *-algebras. We moreover prove the superstability of *-derivations and of quadratic *-derivations on C*-algebras. 2000 Mathematics Subject Classification: 39B52; 47B47; 46L05; 39B72.

Coating compositions hardenable by ionization beams

International Nuclear Information System (INIS)

Chaudhari, D.; Haering, E.; Dobbelstein, A.; Hoselmann, W.

1976-01-01

Coating compositions hardenable by ionizing radiation comprise as binding agents a mixture of A. at least 1 unsaturated olefin compound containing urethane groups, and B. at least 1 further unsaturated olefin compound that may be copolymerized. The unsaturated olefin compound A. containing the urethane groups in a reaction product of (a) a compound of the general formula (CHR 1 = CR 2 COOCH 2 CH(OH)CH 2 O CO-)/sub n/R where n is 1 or 2, where R stands for a straight chain or branched alkyl group of valence n, where R 1 is hydrogen, methyl; or the group -COOCH 2 CH(OH)CH 2 OCOR 3 - where R 3 is a monovalent alkyl residue and where R 2 is hydrogen or methyl, and (b) a compound containing at least 1 isocyanate group where the mixture of (A) and (B) may contain conventional additives of the lacquer industry. 6 claims

Critical Limits for Hg(II) in soils, derived from chronic toxicity data

International Nuclear Information System (INIS)

Tipping, E.; Lofts, S.; Hooper, H.; Frey, B.; Spurgeon, D.; Svendsen, C.

2010-01-01

Published chronic toxicity data for Hg(II) added to soils were assembled and evaluated to produce a data set comprising 52 chronic end-points, five each for plants and invertebrates and 42 for microbes. With end-points expressed in terms of added soil Hg(II) contents, Critical Limits were derived from the 5th percentiles of species sensitivity distributions, values of 0.13 μg (g soil) -1 and 3.3 μg (g soil organic matter) -1 being obtained. The latter value exceeds the currently recommended Critical Limit, used to determine Hg(II) Critical Loads in Europe, of 0.5 μg (g soil organic matter) -1 . We also applied the WHAM/Model VI chemical speciation model to estimate concentrations of Hg 2+ in soil solution, and derived an approximate Critical Limit Function (CLF) that includes pH; log [Hg 2+ ] crit = -2.15 pH -17.10. Because they take soil properties into account, the soil organic matter-based limit and the CLF provide the best assessment of toxic threat for different soils. For differing representative soils, each predicts a range of up to 100-fold in the dry weight-based content of mercury that corresponds to the Critical Limit. - Published laboratory toxicity data and chemical speciation modelling are used to derive Critical Limits expressed as either soil Hg(II) content or Hg 2+ concentration.

Asteroseismology of KIC 7107778: a binary comprising almost identical subgiants

Science.gov (United States)

Li, Yaguang; Bedding, Timothy R.; Li, Tanda; Bi, Shaolan; Murphy, Simon J.; Corsaro, Enrico; Chen, Li; Tian, Zhijia

2018-05-01

We analyse an asteroseismic binary system: KIC 7107778, a non-eclipsing, unresolved target, with solar-like oscillations in both components. We used Kepler short cadence time series spanning nearly 2 yr to obtain the power spectrum. Oscillation mode parameters were determined using Bayesian inference and a nested sampling Monte Carlo algorithm with the DIAMONDS package. The power profiles of the two components fully overlap, indicating their close similarity. We modelled the two stars with MESA and calculated oscillation frequencies with GYRE. Stellar fundamental parameters (mass, radius, and age) were estimated by grid modelling with atmospheric parameters and the oscillation frequencies of l = 0, 2 modes as constraints. Most l = 1 mixed modes were identified with models searched using a bisection method. Stellar parameters for the two sub-giant stars are MA = 1.42 ± 0.06 M⊙, MB = 1.39 ± 0.03 M⊙, RA = 2.93 ± 0.05 R⊙, RB = 2.76 ± 0.04 R⊙, tA = 3.32 ± 0.54 Gyr and tB = 3.51 ± 0.33 Gyr. The mass difference of the system is ˜1 per cent. The results confirm their simultaneous birth and evolution, as is expected from binary formation. KIC 7107778 comprises almost identical twins, and is the first asteroseismic sub-giant binary to be detected.

A lung cancer risk classifier comprising genome maintenance genes measured in normal bronchial epithelial cells.

Science.gov (United States)

Yeo, Jiyoun; Crawford, Erin L; Zhang, Xiaolu; Khuder, Sadik; Chen, Tian; Levin, Albert; Blomquist, Thomas M; Willey, James C

2017-05-02

Annual low dose CT (LDCT) screening of individuals at high demographic risk reduces lung cancer mortality by more than 20%. However, subjects selected for screening based on demographic criteria typically have less than a 10% lifetime risk for lung cancer. Thus, there is need for a biomarker that better stratifies subjects for LDCT screening. Toward this goal, we previously reported a lung cancer risk test (LCRT) biomarker comprising 14 genome-maintenance (GM) pathway genes measured in normal bronchial epithelial cells (NBEC) that accurately classified cancer (CA) from non-cancer (NC) subjects. The primary goal of the studies reported here was to optimize the LCRT biomarker for high specificity and ease of clinical implementation. Targeted competitive multiplex PCR amplicon libraries were prepared for next generation sequencing (NGS) analysis of transcript abundance at 68 sites among 33 GM target genes in NBEC specimens collected from a retrospective cohort of 120 subjects, including 61 CA cases and 59 NC controls. Genes were selected for analysis based on contribution to the previously reported LCRT biomarker and/or prior evidence for association with lung cancer risk. Linear discriminant analysis was used to identify the most accurate classifier suitable to stratify subjects for screening. After cross-validation, a model comprising expression values from 12 genes (CDKN1A, E2F1, ERCC1, ERCC4, ERCC5, GPX1, GSTP1, KEAP1, RB1, TP53, TP63, and XRCC1) and demographic factors age, gender, and pack-years smoking, had Receiver Operator Characteristic area under the curve (ROC AUC) of 0.975 (95% CI: 0.96-0.99). The overall classification accuracy was 93% (95% CI 88%-98%) with sensitivity 93.1%, specificity 92.9%, positive predictive value 93.1% and negative predictive value 93%. The ROC AUC for this classifier was significantly better (p < 0.0001) than the best model comprising demographic features alone. The LCRT biomarker reported here displayed high accuracy and ease

Detection matrix of an electromagnetic radiation and radiological image intensifier comprising such a matrix

International Nuclear Information System (INIS)

Fraleux, Jean.

1982-01-01

This invention concerns a detection matrix comprising, in an electrode lattice of lines and columns, addressing means constituted of thin film technology MOS transistors and photoconductances which enable the number of unit module crossings to be halved and to bring about an increase in the effective detection area. This detection matrix is employed in radiological image intensifiers where it ensures the conversion of incident X photons into reading electric signals or only the detection of a visible radiation in the case where the incident X photons are converted into lesser energy photons by a scintillator. The scintillator is then formed of a panel brought into contact with the detector mosaic [fr

On halide derivatives of rare-earth metal(III) oxidomolybdates(VI) and -tungstates(VI)

International Nuclear Information System (INIS)

Schleid, Thomas; Hartenbach, Ingo

2016-01-01

Halide derivatives of rare-earth metal(III) oxidomolybdates(VI) have been investigated comprehensively over the last decade comprising the halogens fluorine, chlorine, and bromine. Iodide-containing compounds are so far unknown. The simple composition REXMoO 4 (RE=rare-earth element, X=halogen) is realized for X=F almost throughout the complete lanthanide series as well as for yttrium. While ytterbium and lutetium do not form any fluoride derivative, for lanthanum, only a fluoride-deprived compound with the formula La 3 FMo 4 O 16 is realized. Moreover, molybdenum-rich compounds with the formula REXMo 2 O 7 are also known for yttrium and the smaller lanthanoids. For X=Cl the composition REClMoO 4 is known for yttrium and the whole lanthanide series, although, four different structure types were identified. Almost the same holds for X=Br, however, only two different structure types are realized in this class of compounds. In the case of halide derivatives of rare-earth metal(III) oxidotungstates(VI) the composition REXWO 4 is found for chlorides and bromides only, so far. Due to the similar size of Mo 6+ and W 6+ cations, the structures found for the tungstates are basically the same as for the molybdates. With the larger lanthanides, the representatives for both chloride and bromide derivates exhibit similar structural motifs as seen in the molybdates, however, the crystal structure cannot be determined reliably. In case of the smaller lanthanoids, the chloride derivatives are isostructural with the respective molybdates, although the existence ranges differ slightly. The same is true for rare-earth metal(III) bromide oxidotungstates(VI).

Synthesis and evaluation of the plant growth regulator property of indolic compounds derived from safrole

International Nuclear Information System (INIS)

Marchi, Irineu; Rebelo, Ricardo Andrade; Rosa, Flavia A. Fernandes da; Maiochi, Riceli A.

2007-01-01

The present work describes the use of piperonal, a derivative of the secondary metabolite safrole, for the synthesis of new 5,6-methylenedioxy substituted indole carboxylic acids structurally related to the indol-3-yl-acetic acid (AIA, I). The route comprises six steps beginning with piperonal with an overall yield of 19%. Compound IX was tested towards its plant growth regulator properties in bioassays specific for auxine activity. The in vitro assays were performed in a germination chamber and were of two types: root growth in germinated seeds of Lactuca sativa, Cucumbis sativus and Raphanus sativus and peciole biotest using Phaseolus vulgaris. (author)

The role of nanocrystalline cellulose on the microstructure of foamed castor-oil polyurethane nanocomposites.

Science.gov (United States)

Cordero, Andrés Ignacio; Amalvy, Javier Ignacio; Fortunati, Elena; Kenny, José María; Chiacchiarelli, Leonel Matías

2015-12-10

Nanocrystalline cellulose (CNC), obtained by sulphuric acid hydrolysis, was used to synthesize polyurethane foams (PUFs) based on a functionalized castor oil polyol and a Methylene diphenyl diisocyanate (MDI). Formulations with varying isocyanate index (FI) and NCO number were prepared. At 0.5 wt.%, SEM's of the fractured surface underlined that the CNC acted both as a nucleation agent and as a particulate surfactant with cell geometries and apparent density changing selectively. The chemical structure of the PUF (FTIR) changed after the incorporation of CNC by a relative change of the amount of urea, urethane and isocyanurate groups. A low NCO number and isocyanate index contributed to the migration of the CNC to the Hard Segment (HS), acting as reinforcement and improving substantially the compressive mechanical properties (Ec and σc improvements of 63 and 50%, respectively). For a high NCO number or isocyanate index, the CNC migrated to the Soft Segment (SS), without causing a reinforcement effect. The migration of the CNC was also detected with DSC, TGA and DMA, furtherly supporting the hypothesis that a low NCO number and index contributed both to the formation of a microstructure with a higher content of urethane groups. Copyright © 2015 Elsevier Ltd. All rights reserved.

Method and article of manufacture corresponding to a composite comprised of ultra nonacrystalline diamond, metal, and other nanocarbons useful for thermoelectric and other applications

Science.gov (United States)

Gruen, Dieter M.

2010-05-18

One provides (101) disperse ultra-nanocrystalline diamond powder material that comprises a plurality of substantially ordered crystallites that are each sized no larger than about 10 nanometers. One then reacts (102) these crystallites with a metallic component. The resultant nanowire is then able to exhibit a desired increase with respect to its ability to conduct electricity while also substantially preserving the thermal conductivity behavior of the disperse ultra-nanocrystalline diamond powder material. The reaction process can comprise combining (201) the crystallites with one or more metal salts in an aqueous solution and then heating (203) that aqueous solution to remove the water. This heating can occur in a reducing atmosphere (comprising, for example, hydrogen and/or methane) to also reduce the salt to metal.

Conformational dynamics of semiflexibly bridged electron donor-acceptor systems comprising long aliphatic tails

NARCIS (Netherlands)

Bleisteiner, B.; Marian, T.; Schneider, S.; Brouwer, A.M.; Verhoeven, J.W.

2001-01-01

In continuation of our previous work on the conformational dynamics (harpooning mechanism) of semiflexibly bridged electron donor-acceptor systems we have studied a derivative with two long aliphatic chains tethered to the donor and acceptor moieties, respectively. The fitting of the time- and

Position sensitive detector with semiconductor and image electron tube comprising such a detector

International Nuclear Information System (INIS)

Roziere, Guy.

1977-01-01

This invention concerns a position sensitive detector comprising a semiconducting substrate. It also concerns the electron tubes in which the detector may be incorporated in order to obtain an image formed at the tube input by an incident flux of particles or radiation. When a charged particle or group of such particles, electrons in particular, enter the space charge region of an inversely biased semiconductor diode, the energy supplied by these particles releases in the diode a certain number of electron-hole pairs which move in the field existing in the area towards the diode contacts. A corresponding current arises in the connections of this diode which constitutes the signal corresponding to the incident energy. Such a tube or chain of tubes is employed in nuclear medicine for observing parts of the human body, particularly by gamma radiation [fr

Survival data for postoperative adjuvant chemotherapy comprising cisplatin plus vinorelbine after complete resection of non-small cell lung cancer.

Science.gov (United States)

Kenmotsu, Hirotsugu; Ohde, Yasuhisa; Wakuda, Kazushige; Nakashima, Kazuhisa; Omori, Shota; Ono, Akira; Naito, Tateaki; Murakami, Haruyasu; Kojima, Hideaki; Takahashi, Shoji; Isaka, Mitsuhiro; Endo, Masahiro; Takahashi, Toshiaki

2017-09-01

Despite the efficacy of postoperative adjuvant cisplatin (CDDP)-based chemotherapy for patients who have undergone surgical resection of non-small cell lung cancer (NSCLC), few reports have presented survival data for Asian patients treated with adjuvant chemotherapy involving a combination of CDDP and vinorelbine (VNR). This study was performed to evaluate the survival of patients with NSCLC who received postoperative adjuvant chemotherapy comprising CDDP + VNR. We retrospectively evaluated patients with NSCLC who received adjuvant chemotherapy comprising CDDP + VNR at the Shizuoka Cancer Center between February 2006 and October 2011. One hundred patients who underwent surgical resection of NSCLC were included in this study. The patients' characteristics were as follows: median age 63 years (range 36-74 years), female 34%, never-smokers 20%, and non-squamous NSCLC 73%. Pathological stages IIA, IIB, and IIIA were observed in 31, 22, and 47% of patients, respectively. The 5- and 2-year overall survival rates were 73 and 93%, respectively. The 5- and 2-year relapse-free survival rates were 53 and 62%, respectively. Univariate analysis of prognostic factors showed that patient characteristics (sex, histology, and pathological stage) and CDDP dose intensity were not significantly associated with survival. In 48 patients who developed NSCLC recurrence, the 5-year survival rate after recurrence was 29%, and the median survival time after recurrence was 37 months. Our results suggest that the prognosis after surgical resection of NSCLC and adjuvant chemotherapy comprising CDDP + VNR might be improving compared with previous survival data of adjuvant chemotherapy for NSCLC.

Concept for the generation of the model designated for the simulation of interaction between enterprises comprising one major construction company

Directory of Open Access Journals (Sweden)

Dubovkina Alla Viktorovna

2014-12-01

Full Text Available The author offers an original concept designated for the generation of the model designated to simulate interaction between the enterprises comprising one major construction company within the framework of the production and logistics chain, comprising production facilities, transport enterprises, construction and assembly companies. The author has identified the factors that may produce an adverse effect on construction operations or cause untimely commissioning of a construction facility. The author employed methods of mathematics to describe the operations performed by each constituent enterprise. A graphic model describing each operation was compiled through the integration of mathematical functions. The model binds specific operations, performed by constituent companies, to deadlines, drives attention to interaction bottlenecks, and makes adjustments to assure reliable attainment of the main goal, that is, the timely commissioning of a construction facility.

Half esters and coating compositions comprising reactions products of half esters and polyepoxides

NARCIS (Netherlands)

Blaauw, R.; Mulder, W.J.; Koelewijn, R.; Boswinkel, G.

2006-01-01

The present invention relates to half esters based on dicarboxylic acid derivatives and dimer fatty diols, wherein the dimer fatty dio ls are based on dimerised and/or trimerised and/or oligomerised unsaturated fatty acids. The present invention further relates to resin compositions based on the

Critical Limits for Hg(II) in soils, derived from chronic toxicity data

Energy Technology Data Exchange (ETDEWEB)

Tipping, E., E-mail: et@ceh.ac.u [Centre for Ecology and Hydrology, Lancaster Environment Centre, Library Avenue, Bailrigg, Lancaster LA1 4AP (United Kingdom); Lofts, S. [Centre for Ecology and Hydrology, Lancaster Environment Centre, Library Avenue, Bailrigg, Lancaster LA1 4AP (United Kingdom); Hooper, H. [Centre for Ecology and Hydrology, Wallingford, OX10 8BB (United Kingdom); Frey, B. [Swiss Federal Research Institute WSL, 8903 Birmensdorf (Switzerland); Spurgeon, D.; Svendsen, C. [Centre for Ecology and Hydrology, Wallingford, OX10 8BB (United Kingdom)

2010-07-15

Published chronic toxicity data for Hg(II) added to soils were assembled and evaluated to produce a data set comprising 52 chronic end-points, five each for plants and invertebrates and 42 for microbes. With end-points expressed in terms of added soil Hg(II) contents, Critical Limits were derived from the 5th percentiles of species sensitivity distributions, values of 0.13 {mu}g (g soil){sup -1} and 3.3 {mu}g (g soil organic matter){sup -1} being obtained. The latter value exceeds the currently recommended Critical Limit, used to determine Hg(II) Critical Loads in Europe, of 0.5 {mu}g (g soil organic matter){sup -1}. We also applied the WHAM/Model VI chemical speciation model to estimate concentrations of Hg{sup 2+} in soil solution, and derived an approximate Critical Limit Function (CLF) that includes pH; log [Hg{sup 2+}]{sub crit} = -2.15 pH -17.10. Because they take soil properties into account, the soil organic matter-based limit and the CLF provide the best assessment of toxic threat for different soils. For differing representative soils, each predicts a range of up to 100-fold in the dry weight-based content of mercury that corresponds to the Critical Limit. - Published laboratory toxicity data and chemical speciation modelling are used to derive Critical Limits expressed as either soil Hg(II) content or Hg{sup 2+} concentration.

Crystallization behaviour of nanostructured hybrid SiO2-TiO2 gel glasses to nanocomposites.

Science.gov (United States)

Tsvetelina, Gerganova; Yordanka, Ivanova; Yuliya, Vueva; Miranda, Salvado Isabel M; Helena, Fernandes Maria

2010-04-01

The crystallization behaviour of hybrid SiO2-TiO2 nanocomposites derived from titanosiloxanes by sol-gel method has been investigated depending on the type of siloxane precursor and the pirolysis temperature. The resulting hybrid titanosiloxanes, crosslinked with trimethylsilil isocyanate (nitrogen-modified) or methyltrietoxisilane (carbon-modified), were pirolyzed in an inert atmosphere in the temperature range between 600 to 1100 degrees C in order to form C-(N)-Si-O-TiO2 nanocomposites. By means of XRD, FTIR, 29Si NMR, SEM, TEM and AFM investigations have been established that the transformation of the nanostructured SiO2-TiO2 hybrid materials into nanocomposites as well as the crystalline size depend on the titanium content and the type of cross-linking agents used in the synthesizes.

Myeloid-Derived Suppressor Cells and Therapeutic Strategies in Cancer

Directory of Open Access Journals (Sweden)

Hiroshi Katoh

2015-01-01

Full Text Available Development of solid cancer depends on escape from host immunosurveillance. Various types of immune cells contribute to tumor-induced immune suppression, including tumor associated macrophages, regulatory T cells, type 2 NKT cells, and myeloid-derived suppressor cells (MDSCs. Growing body of evidences shows that MDSCs play pivotal roles among these immunosuppressive cells in multiple steps of cancer progression. MDSCs are immature myeloid cells that arise from myeloid progenitor cells and comprise a heterogeneous immune cell population. MDSCs are characterized by the ability to suppress both adaptive and innate immunities mainly through direct inhibition of the cytotoxic functions of T cells and NK cells. In clinical settings, the number of circulating MDSCs is associated with clinical stages and response to treatment in several cancers. Moreover, MDSCs are reported to contribute to chemoresistant phenotype. Collectively, targeting MDSCs could potentially provide a rationale for novel treatment strategies in cancer. This review summarizes recent understandings of MDSCs in cancer and discusses promissing clinical approaches in cancer patients.

Coal and biomass-based chemicals via carbonylation, hydroformylation and homologation reactions

Energy Technology Data Exchange (ETDEWEB)

Sunavala, P.D.; Raghunath, B.

The paper emphasizes the importance of carbonylation, hydroformylation and homologation reactions in the manufacture of organic chemicals (such as acetic acid, acetic anhydride, cellulose acetate, vinyl acetate monomer, aliphatic amines, isocyanates, methanol, ethanol, n-butanol, ethylene glycol, acrylic acid, etc.) from coal and biomass feedstocks. Topics covered are: synthesis of acetic acid; manufacture of acetic anhydride; synthesis of vinyl acetate monomer by carbonylation; synthesis of aliphatic amines by hydroformylation; synthesis of organic diisocyanates; ethanol synthesis by homologation of methanol; synthesis of ethylene glycol via hydroformylation of formaldehyde; synthesis of n- butanol and n-butyraldehyde by propylene formylation; synthesis of acrylic acid; homologation reaction of carboxylic acid esters with ruthenium catalysts; and synthesis of phenyl isocyanate from nitrobenzene by reductive carbonylation. 26 refs.

SYNTHESIS AND CHARACTERIZATION OF NEW STABILIZERS WITH OPTIMAL MOLECULAR WEIGHT

Institute of Scientific and Technical Information of China (English)

Jiang-qing Pan

2001-01-01

Over 2 × l08 tons of polymers are produced every year, and a large portion of polymers faces the degradation problem. There are many effective methods to protect polymers against degradation and the addition of stabilizers to polymer remains the most convenient and effective way of enhancing polymer life and performance. In this article, a series of effective stabilizers with optimal molecular weight (MW), including common, monomeric and polymeric stabilizers (antioxidant and light stabilizer) were synthesized using isocyanation, controlled isocyanation, hydrosilylation, epoxide addition, macroreaction of stabilizing functional compounds and polymerization of monomeric stabilizers. The sructure and performance of these new stabilizers were characterized by using IR, NMR, MS, UV-spectra, XPS and elemental analysis. The current development of stabilizer synthesis was also reviewed.``

PREPARATION AND CHARACTERIZATION OF COMPOSITES COMPRISING MODIFIED HARDWOOD AND WOOD POLYMERS/POLY(VINYL CHLORIDE

Directory of Open Access Journals (Sweden)

Ruxanda Bodîrlău

Full Text Available Chemical modification of hardwood sawdust from ash-tree species was carried out with a solution of maleic anhydride in acetone. Wood polymers, lignin, and cellulose were isolated from the wood sawdust and modified by the same method. Samples were characterized by Fourier transform infrared spectroscopy (FTIR, providing evidence that maleic anhydride esterifies the free hydroxyl groups of the wood polymer components. Composites comprising chemically modified wood sawdust and wood polymers (cellulose, lignin-as variable weight percentages-, and poly (vinyl chloride were obtained and further characterized by using FTIR spectroscopy and scanning electron microscopy (SEM. The thermal behavior of composites was investigated by using the thermogravimetric analysis (TGA. In all cases, thermal properties were affected by fillers addition.

Apparatus comprising trace element dosage and method for treating raw water in biofilter

DEFF Research Database (Denmark)

2015-01-01

the inlet (2) to the outlet (3) or in the reverse direction, - the trace element dosage device (13) is positioned upstream of the porous filter material and microbial biomass and is configured to dose trace element(s) to the water flowing through the filter. A method for treating raw water by microbial......Apparatus for treating raw water in a biofilter The present invention relates to an apparatus in which raw water is treated through microbial activity where microbial activity is controlled by nutrients and other parameters. Some of the nutrients controlling the microbial activity are trace...... elements such as certain metals (Cu, Co, Cr, Mo, Ni, W, Zn or a mixture thereof). The apparatus comprising - a volume provided with an inlet (2) for raw water and an outlet (3) for water having been subjected to microbial activity, a filter and a trace element dosage device (13) are placed in this volume...

Synthesis of new oxovanadium (IV) complexes of potential insulinmimetic activity with coumarin-3-carboxylic acid ligands and substituted derivatives

International Nuclear Information System (INIS)

Salas Fernandez, Paloma; Alvino de la Sota, Nora; Galli Rigo-Righi, Carla

2013-01-01

This work comprises the design and synthesis of four new oxovanadium (IV) complexes, a metal which possesses insulin-mimetic action. Coumarin-3-carboxylic acid and three of its 6 -and 6,8- derivatives were used as ligands. Coumarins are of interest due to their well-known biological properties and pharmacological applications; these include the insulino-sensibilizing effect of certain alcoxy-hydroxy-derivatives which might lead to the eventual existence of a synergetic effect with the active metal center. The synthesis of the vanadyl complexes was preceded by the synthesis of the coumarin-3-carboxylic acid and its 6-bromo- derivative, as well as the syntheses of three derivatives not previously reported: 6-bromo-8-metoxi-, 6-bromo-8-nitro-, and 6-bromo-8-hydroxy-, which were prepared by a Knoevenagel condensation reaction. The complexes, on their part, were prepared by a metathesis reaction between VOSO 4 and the corresponding ligands, on the basis of methods reported for other vanadyl complexes and under strict pH control. The coumarin-3-carboxylic ligands and the derivatives were characterized by 1 H-NMR-, FTIR- and UV-Vis-spectroscopy. In the case of the complexes, their paramagnetic character did not allow for NMR characterization, being thus identified by FT-IR-spectroscopy and by the quantitative determination of their vanadium contents. (author)

Financial Derivatives

DEFF Research Database (Denmark)

Wigan, Duncan

2013-01-01

Contemporary derivatives mark the development of capital and constitute a novel form of ownership. By reconfiguring the temporal, spatial and legal character of ownership derivatives present a substantive challenge to the tax collecting state. While fiscal systems are nationally bounded...... and inherently static, capital itself is unprecedentedly mobile, fluid and fungible. As such derivatives raise the specter of ‘financial weapons of mass destruction’....

Interest rate derivatives

DEFF Research Database (Denmark)

Svenstrup, Mikkel

This Ph.D. thesis consists of four self-contained essays on valuation of interest rate derivatives. In particular derivatives related to management of interest rate risk care are considered.......This Ph.D. thesis consists of four self-contained essays on valuation of interest rate derivatives. In particular derivatives related to management of interest rate risk care are considered....

Deuteration of benzen derivatives and condensed aromatics

International Nuclear Information System (INIS)

Ichikawa, Masaru.

1970-01-01

A process for the deuteration of aromatic compounds (benzene derivatives having one or more cyano, halogeno, nitro or other electron attractive groups, and condensed ring aromatics) is provided. The process comprises reducing said aromatic compound with an alkali metal (preferably K, Rb or Cs) in a solvent (dimethoxyethane, tetrahydrofuran, etc.) to provide an electron-acceptor-donor complex, which is followed by introducing gaseous deuterium into the solution. The deuteration takes place selectively at the position of highest electron density in accordance with nature of the substituent, regardless of steric hindrance. The process is applicable to a wide variety of aromatics to give deuterated compounds in high yields. In one example, 5x10 -3 mole of anthracene (An) was reacted with 2g of metallic potassium in 80cc of dimethoxyethane in a N 2 atmosphere. Into the resulting solution of An=2K + was introduced D 2 gas (30 cmHg) at 25 0 C. After decomposition with air and washing with alcohol, the precipitate was recrystallized from benzene. Yield of recovered AN: more than 90%. Yield of deuteration: 100%. Position of deuteration: 9 and 10 (revealed by NMR and mass spectroscopy). (Kaichi, S.)

Disease Modeling Using 3D Organoids Derived from Human Induced Pluripotent Stem Cells.

Science.gov (United States)

Ho, Beatrice Xuan; Pek, Nicole Min Qian; Soh, Boon-Seng

2018-03-21

The rising interest in human induced pluripotent stem cell (hiPSC)-derived organoid culture has stemmed from the manipulation of various combinations of directed multi-lineage differentiation and morphogenetic processes that mimic organogenesis. Organoids are three-dimensional (3D) structures that are comprised of multiple cell types, self-organized to recapitulate embryonic and tissue development in vitro. This model has been shown to be superior to conventional two-dimensional (2D) cell culture methods in mirroring functionality, architecture, and geometric features of tissues seen in vivo. This review serves to highlight recent advances in the 3D organoid technology for use in modeling complex hereditary diseases, cancer, host-microbe interactions, and possible use in translational and personalized medicine where organoid cultures were used to uncover diagnostic biomarkers for early disease detection via high throughput pharmaceutical screening. In addition, this review also aims to discuss the advantages and shortcomings of utilizing organoids in disease modeling. In summary, studying human diseases using hiPSC-derived organoids may better illustrate the processes involved due to similarities in the architecture and microenvironment present in an organoid, which also allows drug responses to be properly recapitulated in vitro.

Preparation of Organic-Inorganic Hybrid Materials Based on MCM-41 and Its Applications

Directory of Open Access Journals (Sweden)

Sana M. Alahmadi

2013-01-01

Full Text Available This work reports the covalent attachment of three different calix[4]arenes (calix[4]arene (C4, p-sulfonatocalix[4]arene (C4S, and p-tert-butyl-calix[4]arene (PC4 to MCM-41, using a three-step modification process. 3-Chloropropyltrimethoxysilane (ClPTS was first attached to the mesoporous silica surface and subsequently converted to amides via the reaction with toluene diisocyanate (TDI. Finally, calix[4]arene derivatives attached to the isocyanate ending remained available on toluene di-iso-cyanate. Changes in the surface properties of the mesoporous silica caused by the chemical modification were monitored using the Fourier transform infrared spectroscopy (FTIR, thermal analysis (TGA, and elemental analysis. The FTIR spectra and TGA analysis verify that the calix[4]arene derivatives are covalently attached to the mesoporous silica. The preservation of the MCM-41 channel system was checked by the X-ray diffraction and nitrogen adsorption analysis. These materials were then used to evaluate the sorption properties of some organotins compounds (Tributyltin (TBT, Triphenyltin (TPT, and Dibutyltin (DBT.

Mechanical and swelling behaviour of well characterized polybutadiene networks

Science.gov (United States)

Mckenna, Gregory B.; Hinkley, Jeffrey A.

1986-01-01

Endlinking of hydroxyl-terminated polybutadiene with the appropriate isocyanate has been used to prepare well characterized networks. Two networks have been studied with molecular weights of the prepolymers being 6100 and 2400 g/mole by g.p.c. Cylindrical specimens were prepared and the derivatives of the stored energy function with respect to the stretch invariants were determined by torque and normal force measurements in torsion. From these data the Valanis-Landel (1967) stored energy function derivatives w-prime(lambda) were determined for both networks. The stored energy function for the junction constraint model of Flory (1953, 1977, 1979, 1985) which is a special form of the Valanis-Landel function, has been fitted to that determined from the experiments. The contributions to the stored energy function from the phantom network and from the junction constraints respectively do not agree with predictions from the topologies of the networks. In spite of this, the form of w-prime(lambda) for the junction constraint model gives an excellent 'curve fit' to the data. Comparison is also made with equilibrium swelling.

Implementation of a documentation model comprising nursing terminologies--theoretical and methodological issues.

Science.gov (United States)

von Krogh, Gunn; Nåden, Dagfinn

2008-04-01

To describe and discuss theoretical and methodological issues of implementation of a nursing services documentation model comprising NANDA nursing diagnoses, Nursing Intervention Classification and Nursing Outcome Classification terminologies. The model is developed for electronic patient record and was implemented in a psychiatric hospital on an organizational level and on five test wards in 2001-2005. The theory of Rogers guided the process of innovation, whereas the implementation procedure of McCloskey and Bulecheck combined with adult learning principals guided the test site implementation. The test wards managed in different degrees to adopt the model. Two wards succeeded fully, including a ward with high percentage of staff with interdisciplinary background. Better planning regarding the impact of the organization's innovative aptitude, the innovation strategies and the use of differentiated methods regarding the clinician's individual premises for learning nursing terminologies might have enhanced the adoption to the model. To better understand the nature of barriers and the importance of careful planning regarding the implementation of electronic patient record elements in nursing care services, focusing on nursing terminologies. Further to indicate how a theory and specific procedure can be used to guide the process of implementation throughout the different levels of management.

Financial Derivatives

OpenAIRE

Janečková, Alena

2011-01-01

1 Abstract/ Financial derivatives The purpose of this thesis is to provide an introduction to financial derivatives which has been, from the legal perspective, described in a not satisfactory manner as quite little literature that can be found about this topic. The main objectives of this thesis are to define the term "financial derivatives" and its particular types and to analyse legal nature of these financial instruments. The last objective is to try to draft future law regulation of finan...

Journal of Chemical Sciences | Indian Academy of Sciences

Indian Academy of Sciences (India)

propanonyl thio)-3-arylquinazol-4(3H)ones (2). Further, the treatment of compound (2) with hydroxylamine hydrochloride gave the corresponding oximes (3) which on reaction with phenyl isocyanate in THF yielded corresponding oxime ...

Synthesis, mechanical, thermal and chemical properties of ...

Indian Academy of Sciences (India)

Unknown

Cardanol, an excellent monomer for polymer production, has been isolated from CNSL and allowed to ... solution), and 1% glutaric acid catalyst in methanol were refluxed .... volving terminal isocyanate groups with active hydrogen present in ...

Health Concerns about Spray Polyurethane Foam

Science.gov (United States)

Exposures to SPF's key ingredient, isocyanates and other SPF chemicals in vapors, aerosols, and dust created during and after installation, can cause: asthma, sensitization, lung damage, other respiratory and breathing problems, skin and eye irritation.

Biopolymer Electrolyte Based on Derivatives of Cellulose from Kenaf Bast Fiber

Directory of Open Access Journals (Sweden)

Mohd Saiful Asmal Rani

2014-09-01

Full Text Available A cellulose derivative, carboxymethyl cellulose (CMC, was synthesized by the reaction of cellulose from kenaf bast fiber with monochloroacetic acid. A series of biopolymer electrolytes comprised of the synthesized CMC and ammonium acetate (CH3COONH4 were prepared by the solution-casting technique. The biopolymer-based electrolyte films were characterized by Fourier Transform Infrared spectroscopy to investigate the formation of the CMC–CH3COONH4 complexes. Electrochemical impedance spectroscopy was conducted to obtain their ionic conductivities. The highest conductivity at ambient temperature of 5.77 × 10−4 S cm−1 was obtained for the electrolyte film containing 20 wt% of CH3COONH4. The biopolymer electrolyte film also exhibited electrochemical stability up to 2.5 V. These results indicated that the biopolymer electrolyte has great potential for applications to electrochemical devices, such as proton batteries and solar cells.

Lignocellulosic Biomass Derived Functional Materials: Synthesis and Applications in Biomedical Engineering.

Science.gov (United States)

Zhang, Lei; Peng, Xinwen; Zhong, Linxin; Chua, Weitian; Xiang, Zhihua; Sun, Runcang

2017-09-18

The pertinent issue of resources shortage arising from global climate change in the recent years has accentuated the importance of materials that are environmental friendly. Despite the merits of current material like cellulose as the most abundant natural polysaccharide on earth, the incorporation of lignocellulosic biomass has the potential to value-add the recent development of cellulose-derivatives in drug delivery systems. Lignocellulosic biomass, with a hierarchical structure, comprised of cellulose, hemicellulose and lignin. As an excellent substrate that is renewable, biodegradable, biocompatible and chemically accessible for modified materials, lignocellulosic biomass sets forth a myriad of applications. To date, materials derived from lignocellulosic biomass have been extensively explored for new technological development and applications, such as biomedical, green electronics and energy products. In this review, chemical constituents of lignocellulosic biomass are first discussed before we critically examine the potential alternatives in the field of biomedical application. In addition, the pretreatment methods for extracting cellulose, hemicellulose and lignin from lignocellulosic biomass as well as their biological applications including drug delivery, biosensor, tissue engineering etc will be reviewed. It is anticipated there will be an increasing interest and research findings in cellulose, hemicellulose and lignin from natural resources, which help provide important directions for the development in biomedical applications. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

21 CFR 184.1685 - Rennet (animal-derived) and chymosin preparation (fermentation-derived).

Science.gov (United States)

2010-04-01

... (fermentation-derived). 184.1685 Section 184.1685 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF... (animal-derived) and chymosin preparation (fermentation-derived). (a)(1) Rennet and bovine rennet are... clear solution containing the active enzyme chymosin (E.C. 3.4.23.4). It is derived, via fermentation...

A Phylogenetic Analysis of Chloroplast Genomes Elucidates the Relationships of the Six Economically Important Brassica Species Comprising the Triangle of U

NARCIS (Netherlands)

Li, Peirong; Zhang, Shujiang; Li, Fei; Zhang, Shifan; Zhang, Hui; Wang, Xiaowu; Sun, Rifei; Bonnema, Guusje; Borm, Theo J.A.

2017-01-01

The Brassica genus comprises many economically important worldwide cultivated crops. The well-established model of the Brassica genus, U’s triangle, consists of three basic diploid plant species (Brassica rapa, Brassica oleracea, and Brassica nigra) and three amphidiploid species (Brassica napus,

A Modular Synthesis of N-Benzotriazole Ureas Using Alkylation of 5-Nitrobenzotriazole

Czech Academy of Sciences Publication Activity Database

Machara, A.; Konvalinka, Jan; Kotora, M.

2016-01-01

Roč. 1, č. 1 (2016), s. 101-107 ISSN 2365-6549 R&D Projects: GA ČR GA13-19561S Institutional support: RVO:61388963 Keywords : benzotriazole * alkylation * urea * isocyanate * reduction Subject RIV: CE - Biochemistry

Remarkable promoting effect of rhodium on the catalytic performance of Ag/Al2O3 for the selective reduction of NO with decane

International Nuclear Information System (INIS)

Sato, Kazuhito; Yoshinari, Tomohiro; Kintaichi, Yoshiaki; Haneda, Masaaki; Hamada, Hideaki

2003-01-01

The addition of small amounts of rhodium enhanced the activity of Ag/Al 2 O 3 catalyst for the selective reduction of NO with decane at low temperatures. The Rh-promoted Ag/Al 2 O 3 showed its high performance even in the presence of low concentrations of SO 2 . Based on the catalytic activity for elementary reactions, it was suggested that the role of added rhodium is to enhance the reaction between NO x and decane-derived species, leading to NO reduction. Catalyst characterization by UV-Vis spectroscopy indicated that the major silver species on Rh-promoted Ag/Al 2 O 3 is Ag nn δ+ clusters, which would be responsible for the high activity. FT-IR measurements revealed that the formation rate of isocyanate species, which is a major reaction intermediate, is higher on Rh-promoted Ag/Al 2 O 3

Human lactoferricin derived di-peptides deploying loop structures induce apoptosis specifically in cancer cells through targeting membranous phosphatidylserine.

Science.gov (United States)

Riedl, Sabrina; Leber, Regina; Rinner, Beate; Schaider, Helmut; Lohner, Karl; Zweytick, Dagmar

2015-11-01

Host defense-derived peptides have emerged as a novel strategy for the development of alternative anticancer therapies. In this study we report on characteristic features of human lactoferricin (hLFcin) derivatives which facilitate specific killing of cancer cells of melanoma, glioblastoma and rhabdomyosarcoma compared with non-specific derivatives and the synthetic peptide RW-AH. Changes in amino acid sequence of hLFcin providing 9-11 amino acids stretched derivatives LF11-316, -318 and -322 only yielded low antitumor activity. However, the addition of the repeat (di-peptide) and the retro-repeat (di-retro-peptide) sequences highly improved cancer cell toxicity up to 100% at 20 μM peptide concentration. Compared to the complete parent sequence hLFcin the derivatives showed toxicity on the melanoma cell line A375 increased by 10-fold and on the glioblastoma cell line U-87mg by 2-3-fold. Reduced killing velocity, apoptotic blebbing, activation of caspase 3/7 and formation of apoptotic DNA fragments proved that the active and cancer selective peptides, e.g. R-DIM-P-LF11-322, trigger apoptosis, whereas highly active, though non-selective peptides, such as DIM-LF11-318 and RW-AH seem to kill rapidly via necrosis inducing membrane lyses. Structural studies revealed specific toxicity on cancer cells by peptide derivatives with loop structures, whereas non-specific peptides comprised α-helical structures without loop. Model studies with the cancer membrane mimic phosphatidylserine (PS) gave strong evidence that PS only exposed by cancer cells is an important target for specific hLFcin derivatives. Other negatively charged membrane exposed molecules as sialic acid, heparan and chondroitin sulfate were shown to have minor impact on peptide activity. Copyright © 2015. Published by Elsevier B.V.

Magnetoresistance in single-electron transistors comprising a superconducting island with ferromagnetic leads

Science.gov (United States)

Mizugaki, Yoshinao; Takiguchi, Masashi; Tamura, Nobuyuki; Shimada, Hiroshi

2018-03-01

We report electric and magnetic field responses of single-electron transistors (SETs) comprising a superconducting island with ferromagnetic (FM) leads. We fabricated two SETs, one of which had relatively high resistance and the other had relatively low resistance. The SETs had two states for the gate charge: SET-ON or SET-OFF. They also had two states for the FM lead magnetization: parallel (P) or anti-parallel (AP) configuration. Current-voltage characteristics of four SET states (“P & SET-ON,” “P & SET-OFF,” “AP & SET-ON,” and “AP & SET-OFF”) were measured at approximately 0.1 K in a compact dilution refrigerator. Magnetoresistance ratio (MRR) values were obtained for the SET-ON and SET-OFF states, respectively. The higher-resistance SET1 exhibited positive MRR values for all measured bias voltages. The MRR enhancement was confirmed for the SET-OFF state, which agreed well with the co-tunneling model. The lower-resistance SET2, on the other hand, exhibited negative and positive MRR values for higher and lower bias voltage conditions, respectively. The bias voltage for the MRR polarity reversal was changed by the gate voltage. It was also confirmed that the co-tunneling model was partially valid for negative MRR values.

Polycondensation of Asparagine-comprising Dipeptides in Aqueous Media-A Simulation of Polypeptide Formation in Primordial Earth Hydrosphere

Science.gov (United States)

Munegumi, Toratane; Tanikawa, Naoya

2017-09-01

Asparagine and aspartic acid might have mutually transformed in the primordial hydrosphere of the earth, if ammonia and aspartic acid had existed in equilibrium. These amino acids seem to contribute to polypeptides, while the simple amino acids glycine and alanine easily form cyclic dipeptides and do not achieve long peptide chains. Asparagine-comprising dipeptides contribute some kinds of activation forms of dipeptides because these can polymerize faster than asparagine only. The new finding of polypeptide formation suggests a pathway of sequential polypeptides to evolve a diversity of polypeptides.

Polycondensation of Asparagine-comprising Dipeptides in Aqueous Media-A Simulation of Polypeptide Formation in Primordial Earth Hydrosphere.

Science.gov (United States)

Munegumi, Toratane; Tanikawa, Naoya

2017-09-01

Asparagine and aspartic acid might have mutually transformed in the primordial hydrosphere of the earth, if ammonia and aspartic acid had existed in equilibrium. These amino acids seem to contribute to polypeptides, while the simple amino acids glycine and alanine easily form cyclic dipeptides and do not achieve long peptide chains. Asparagine-comprising dipeptides contribute some kinds of activation forms of dipeptides because these can polymerize faster than asparagine only. The new finding of polypeptide formation suggests a pathway of sequential polypeptides to evolve a diversity of polypeptides.

Derivative chameleons

International Nuclear Information System (INIS)

Noller, Johannes

2012-01-01

We consider generalized chameleon models where the conformal coupling between matter and gravitational geometries is not only a function of the chameleon field φ, but also of its derivatives via higher order co-ordinate invariants (such as ∂ μ φ∂ μ φ,□φ,...). Specifically we consider the first such non-trivial conformal factor A(φ,∂ μ φ∂ μ φ). The associated phenomenology is investigated and we show that such theories have a new generic mass-altering mechanism, potentially assisting the generation of a sufficiently large chameleon mass in dense environments. The most general effective potential is derived for such derivative chameleon setups and explicit examples are given. Interestingly this points us to the existence of a purely derivative chameleon protected by a shift symmetry for φ → φ+c. We also discuss potential ghost-like instabilities associated with mass-lifting mechanisms and find another, mass-lowering and instability-free, branch of solutions. This suggests that, barring fine-tuning, stable derivative models are in fact typically anti-chameleons that suppress the field's mass in dense environments. Furthermore we investigate modifications to the thin-shell regime and prove a no-go theorem for chameleon effects in non-conformal geometries of the disformal type

Derivative chameleons

Energy Technology Data Exchange (ETDEWEB)

Noller, Johannes, E-mail: johannes.noller08@imperial.ac.uk [Theoretical Physics, Blackett Laboratory, Imperial College London, Prince Consort Road, London, SW7 2BZ (United Kingdom)

2012-07-01

We consider generalized chameleon models where the conformal coupling between matter and gravitational geometries is not only a function of the chameleon field φ, but also of its derivatives via higher order co-ordinate invariants (such as ∂{sub μ}φ∂{sup μ}φ,□φ,...). Specifically we consider the first such non-trivial conformal factor A(φ,∂{sub μ}φ∂{sup μ}φ). The associated phenomenology is investigated and we show that such theories have a new generic mass-altering mechanism, potentially assisting the generation of a sufficiently large chameleon mass in dense environments. The most general effective potential is derived for such derivative chameleon setups and explicit examples are given. Interestingly this points us to the existence of a purely derivative chameleon protected by a shift symmetry for φ → φ+c. We also discuss potential ghost-like instabilities associated with mass-lifting mechanisms and find another, mass-lowering and instability-free, branch of solutions. This suggests that, barring fine-tuning, stable derivative models are in fact typically anti-chameleons that suppress the field's mass in dense environments. Furthermore we investigate modifications to the thin-shell regime and prove a no-go theorem for chameleon effects in non-conformal geometries of the disformal type.

Aliphatic isocyanurates and polyisocyanurate networks

NARCIS (Netherlands)

Driest, Pieter Job; Lenzi, V.; Marques, L.S.A.; Ramos, M.M.D; Dijkstra, D.J.; Richter, F.U.; Stamatialis, Dimitrios; Grijpma, Dirk W.

2016-01-01

The production, processing, and application of aliphatic isocyanate (NCO)-based thermosets such as polyurethane coatings and adhesives are generally limited by the surprisingly high viscosity of tri-functionality and higher-functionality isocyanurates. These compounds are essential crosslinking

Aliphatic isocyanurates and polyisocyanurate networks

NARCIS (Netherlands)

Driest, P. J.; Lenzi, V.; Marques, L. S. A.; Ramos, M. M. D.; Dijkstra, D. J.; Richter, F. U.; Stamatialis, D.; Grijpma, D. W.

2017-01-01

The production, processing, and application of aliphatic isocyanate (NCO)-based thermosets such as polyurethane coatings and adhesives are generally limited by the surprisingly high viscosity of tri-functionality and higher-functionality isocyanurates. These compounds are essential crosslinking

Reaction pathways of biomass-derived oxygenates on noble metal surfaces

Science.gov (United States)

McManus, Jesse R.

As the global demand for energy continues to rise, the environmental concerns associated with increased fossil fuel consumption have motivated the use of biomass as an alternative, carbon-renewable energy feedstock. Controlling reactive chemistry of the sugars that comprise biomass through the use of catalysis becomes essential in effectively producing green fuels and value-added chemicals. Recent work on biomass conversion catalysts have demonstrated the efficacy of noble metal catalyst systems for the reforming of biomass to hydrogen fuel, and the hydrodeoxygenation of biomass-derived compounds to value-added chemicals. In particular, Pt and Pd surfaces have shown considerable promise as reforming catalysts in preliminary aqueous phase reforming studies. It becomes important to understand the mechanisms by which these molecules react on the catalyst surfaces in order to determine structure-activity relationships and bond scission energetics as to provide a framework for engineering more active and selective catalysts. Fundamental surface science techniques provide the tools to do this; however, work in this field has been so far limited to simple model molecules like ethanol and ethylene glycol. Herein, temperature programmed desorption and high resolution electron energy loss spectroscopy are utilized in an ultra-high vacuum surface science study of the biomass-derived sugar glucose on Pt and Pd single crystal catalysts. Overall, it was determined that the aldehyde function of a ring-open glucose molecule plays an integral part in the initial bonding and reforming reaction pathway, pointing to the use of aldoses glycolaldehyde and glyceraldehyde as the most appropriate model compounds for future studies. Furthermore, the addition of adatom Zn to a Pt(111) surface was found to significantly decrease the C-H and C-C bond scission activity in aldehyde containing compounds, resulting in a preferred deoxygenation pathway in opposition to the decarbonylation pathway

Ion source using a hollow cathode discharge system and especially, particle accelerator comprising said source

International Nuclear Information System (INIS)

Mourier, Georges.

1975-01-01

An ion source provided with a hollow cathode discharge system is presented. The ion extraction system is designed in view of generating a beam directed towards a point of use located far from the point of ion production. Said source essentially comprises two cathodes facing each other, an anode at a continuous voltage with respect to the cathodes, a heated filament beyond the cathode on the path of the extracted beam, and a grid between said filament and cathode. The ion extraction is limited to a certain portion of the ions present inside the plasma, so as the discharge to continue to be sustained by itself. For that purpose pierced cathodes are used, with a transparency (the ratio of the hole area to the whole cathode area) not much higher than 50% [fr

Identifying a compound modifying a cellular response, comprises attaching cells having a reporter system onto solid supports, releasing a library member, screening and identifying target cells

DEFF Research Database (Denmark)

2011-01-01

The present invention relates to methods for identifying compounds capable of modulating a cellular response. The methods involve attaching living cells to solid supports comprising a library of test compounds. Test compounds modulating a cellular response, for example via a cell surface molecule...... may be identified by selecting solid supports comprising cells, wherein the cellular response of interest has been modulated. The cellular response may for example be changes in signal transduction pathways modulated by a cell surface molecule....

MODIS-derived daily PAR simulation from cloud-free images and its validation

Energy Technology Data Exchange (ETDEWEB)

Chen, Liangfu; Gu, Xingfa; Tian, Guoliang [State Key Laboratory of Remote Sensing Science, Jointly Sponsored by Institute of Remote Sensing Applications of Chinese Academy of Sciences and Beijing Normal University, Beijing 100101 (China); The Center for National Spaceborne Demonstration, Beijing 100101 (China); Gao, Yanhua [State Key Laboratory of Remote Sensing Science, Jointly Sponsored by Institute of Remote Sensing Applications of Chinese Academy of Sciences and Beijing Normal University, Beijing 100101 (China); Institute of Geographic Sciences and Natural Resources Research, Chinese Academy of Sciences, Beijing 100101 (China); Yang, Lei [State Key Laboratory of Remote Sensing Science, Jointly Sponsored by Institute of Remote Sensing Applications of Chinese Academy of Sciences and Beijing Normal University, Beijing 100101 (China); Jilin University, Changchun 130026 (China); Liu, Qinhuo [State Key Laboratory of Remote Sensing Science, Jointly Sponsored by Institute of Remote Sensing Applications of Chinese Academy of Sciences and Beijing Normal University, Beijing 100101 (China)

2008-06-15

In this paper, a MODIS-derived daily PAR (photosynthetically active radiation) simulation model from cloud-free image over land surface has been developed based on Bird and Riordan's model. In this model, the total downwelling spectral surface irradiance is divided into two parts: one is beam irradiance, and another is diffuse irradiance. The attenuation of solar beam irradiance comprises scattering by the gas mixture, absorption by ozone, the gas mixture and water vapor, and scattering and absorption by aerosols. The diffuse irradiance is scattered out of the direct beam and towards the surface. The multiple ground-air interactions have been taken into account in the diffuse irradiance model. The parameters needed in this model are atmospheric water vapor content, aerosol optical thickness and spectral albedo ranging from 400 nm to 700 nm. They are all retrieved from MODIS data. Then, the instantaneous photosynthetically available radiation (IPAR) is integrated by using a weighted sum at each of the visible MODIS wavebands. Finally, a daily PAR is derived by integration of IPAR. In order to validate the MODIS-derived PAR model, we compared the field PAR measurements in 2003 and 2004 against the simulated PAR. The measurements were made at the Qianyanzhou ecological experimental station, Chinese Ecosystem Research Network. A total of 54 days of cloud-free MODIS L1B level images were used for the PAR simulation. Our results show that the simulated PAR is consistent with field measurements, where the correlation coefficient of linear regression between calculated PAR and measured PAR is 0.93396. However, there were some uncertainties in the comparison of 1 km pixel PAR with the tower flux stand measurement. (author)

Efficient Synthesis of Single-Chain Polymer Nanoparticles via Amide Formation

Directory of Open Access Journals (Sweden)

Ana Sanchez-Sanchez

2015-01-01

Full Text Available Single-chain technology (SCT allows the transformation of individual polymer chains to folded/collapsed unimolecular soft nanoparticles. In this work we contribute to the enlargement of the SCT toolbox by demonstrating the efficient synthesis of single-chain polymer nanoparticles (SCNPs via intrachain amide formation. In particular, we exploit cross-linking between active methylene groups and isocyanate moieties as powerful “click” chemistry driving force for SCNP construction. By employing poly(methyl methacrylate- (PMMA- based copolymers bearing β-ketoester units distributed randomly along the copolymer chains and bifunctional isocyanate cross-linkers, SCNPs were successfully synthesized at r.t. under appropriate reaction conditions. Characterization of the resulting SCNPs was carried out by means of a combination of techniques including size exclusion chromatography (SEC, infrared (IR spectroscopy, proton nuclear magnetic resonance (1H NMR spectroscopy, dynamic light scattering (DLS, and elemental analysis (EA.

Canadian safeguards research and development in support of the IAEA program document outlining the various tasks which comprise the program

International Nuclear Information System (INIS)

1985-12-01

Canada has established a safeguards research and development program, the purpose of which is to supplement the resources of the International Atomic Energy Agency. The program of support is a coordinated effort for the development and application of safeguards techniques and instruments to facilities safeguarded by the IAEA. This document sets forth those tasks which comprise the program

Taxation of Derivatives

DEFF Research Database (Denmark)

Dyppel, Katja Joo

2013-01-01

The main objective for this thesis is to analyse and systematise the Danish legislation on taxation of derivatives. According to financial terminology, a derivative is a financial instrument. Its value is derived from changes in the value of one or more underlying assets.The most common derivatives...... in the Danish tax legislation. However, contracts known as forwards (terminskontrakter) and options (aftaler om køberetter og salgsretter) are generally included in the term financials contracts covered by the Danish Act on Taxation of Gains and Losses on Claims and Debt. The main part of the analysis deals...... with the scope of sections 29-33 of the Danish Act on Taxation of Gains and Losses on Claims and Debt and the tax consequences for the covered financial contracts. In the analysis of taxation of derivatives, the fundamental issues of qualification and tax treatment of the instruments are dealt with....

Possibility of sorption purification of chromium comprising waste waters of galvanic production by inorganic ion exchangers

International Nuclear Information System (INIS)

Khaynakov, S.A.; Likov, E.P.; Bortun, A.I.; Belyukov, V.N.

1986-01-01

Present work is devoted to possibilities of sorption purification of chromium comprising waste waters of galvanic production by inorganic ion exchangers. Thus, the comparative study of sorption of chromium ions on anion exchanger A B-17 and on inorganic ion exchangers on the basis of hydrated titanium and zirconium dioxides in static and dynamic conditions is conducted. The influence of chromium ions concentration, solutions acidity (ph=1÷12) and presence of base electrolyte on sorption is studied. The state of chromium ions sorbed by inorganic ion exchangers is studied by means of infrared spectroscopy and spectroscopy. It is defined that inorganic sorbents could be used for chromium extraction from different solutions.

Experts' understanding of partial derivatives using the Partial Derivative Machine

OpenAIRE

Roundy, David; Dorko, Allison; Dray, Tevian; Manogue, Corinne A.; Weber, Eric

2014-01-01

Partial derivatives are used in a variety of different ways within physics. Most notably, thermodynamics uses partial derivatives in ways that students often find confusing. As part of a collaboration with mathematics faculty, we are at the beginning of a study of the teaching of partial derivatives, a goal of better aligning the teaching of multivariable calculus with the needs of students in STEM disciplines. As a part of this project, we have performed a pilot study of expert understanding...

Design of self-dispersible charged-polymer building blocks for waterborne polyurethane dispersions

NARCIS (Netherlands)

Jiménez-Pardo, I.; Sun, P.; van Benthem, R.A.T.M.; Esteves, A.C.C.

2018-01-01

Waterborne polyurethane dispersions (PUDs) currently have a wide spectrum of applications as coating resins for biomedical products, food packaging, cosmetics and traditional coatings. At present, PUDs are commonly prepared by the “prepolymer extension” method in which isocyanate terminated

Multivalent contrast agents based on Gd-DTPA-terminated poly (propylene imine) dendrimers for Magnetic Resonance Imaging

NARCIS (Netherlands)

Langereis, S.; Lussanet, de Q.G; Genderen, van M.H.P.; Backes, W.H.; Meijer, E.W.

2004-01-01

A convenient methodol. has been developed for the synthesis of gadolinium-diethylenetriaminepentaacetic acid (Gd-DTPA)-terminated poly(propylene imine) dendrimers as contrast agents for magnetic resonance imaging (MRI). In our strategy, isocyanate-activated, tert-butyl-protected DTPA analogs were

Composite materials comprising two jonal functions and methods for making the same

Science.gov (United States)

Fareed, Ali Syed; Garnier, John Edward; Schiroky, Gerhard Hans; Kennedy, Christopher Robin; Sonuparlak, Birol

2001-01-01

The present invention generally relates to mechanisms for preventing undesirable oxidation (i.e., oxidation protection mechanisms) in composite bodies. The oxidation protection mechanisms include getterer materials which are added to the composite body which gather or scavenge undesirable oxidants which may enter the composite body. The getterer materials may be placed into at least a portion of the composite body such that any undesirable oxidant approaching, for example, a fiber reinforcement, would be scavenged by (e.g., reacted with) the getterer. The getterer materials) may form at least one compound which acts as a passivation layer, and/or is able to move by bulk transport (e.g., by viscous flow as a glassy material) to a crack, and sealing the crack, thereby further enhancing the oxidation protection of the composite body. One or more ceramic filler materials which serve as reinforcements may have a plurality of super-imposed coatings thereon, at least one of which coatings may function as or contain an oxidation protection mechanism. Specifically, a coating comprising boron nitride which has been engineered or modified to contain some silicon exhibits improved corrosion resistance, specifically to oxygen and moisture. The coated materials may be useful as reinforcing materials in high performance composites to provide improved mechanical properties such as fracture toughness. The present invention also relates to improved composites which incorporate these materials, and to their methods of manufacture.

Solvent exchange-induced in situ forming gel comprising ethyl cellulose-antimicrobial drugs.

Science.gov (United States)

Phaechamud, Thawatchai; Mahadlek, Jongjan

2015-10-15

Solvent-exchanged in situ forming gel is a drug delivery system which is in sol form before administration. When it contacts with the body fluid, then the water miscible organic solvent dissipates and water penetrates into the system, leading the polymer precipitation as in situ gel at the site of injection. The aim of this research was to study the parameters affecting the gel properties, drug release and antimicrobial activities of the in situ forming gels prepared from ethyl cellulose (EC) dissolved in N-methyl pyrrolidone (NMP) to deliver the antimicrobial agents (doxycycline hyclate, metronidazole and benzyl peroxide) for periodontitis treatment. The gel appearance, pH, viscosity, rheology, syringeability, gel formation, rate of water diffusion into the gels, in vitro degradation, drug release behavior and antimicrobial activities against Staphylococcus aureus, Escherichia coli, Candida albicans, Streptococcus mutans and Porphyrommonas gingivalis were determined. Increasing the amount of EC increased the viscosity of system while still exhibiting Newtonian flow and increased the work of syringeability whereas decreased the releasing of drug. The system transformed into the rigid gel formation after being injected into the simulated gingival crevicular fluid. The developed systems containing 5% w/w antimicrobial agent showed the antimicrobial activities against all test bacteria. Thus the developed solvent exchange-induced in situ forming gels comprising EC-antimicrobial drugs exhibited potential use for periodontitis treatment. Copyright © 2015 Elsevier B.V. All rights reserved.

A dielectric tensor for magnetoplasmas comprising components with generalized Lorentzian distributions

International Nuclear Information System (INIS)

Mace, R.L.

1996-01-01

We report on a new form for the dielectric tensor for a plasma containing superthermal particles. The individual particle components are modelled by 3-dimensional isotropic kappa, or generalized Lorentzian, distributions with arbitrary real-valued index κ. The new dielectric tensor is valid for arbitrary wavevectors. The dielectric tensor, which resembles Trubnikov's dielectric tensor for a relativistic plasma, is compared with the familiar Maxwellian form. When the dielectric tensor is used in the plasma dispersion relation for waves propagating parallel to the magnetic field it reproduces previously derived dispersion relations for various electromagnetic and electrostatic waves in plasmas modelled by Lorentzian particle distributions. Within the constraints of propagation parallel to the ambient magnetic field, we extend the above results to incorporate loss-cone Lorentzian particle distributions, which have important applications in laboratory mirror devices, as well as in space and astrophysical environments. (orig.)

Phenotypic stability and plasticity in GMP-derived cells as determined by their underlying regulatory network.

Science.gov (United States)

Ramírez, Carlos; Mendoza, Luis

2018-04-01

Blood cell formation has been recognized as a suitable system to study celular differentiation mainly because of its experimental accessibility, and because it shows characteristics such as hierarchical and gradual bifurcated patterns of commitment, which are present in several developmental processes. Although hematopoiesis has been extensively studied and there is a wealth of molecular and cellular data about it, it is not clear how the underlying molecular regulatory networks define or restrict cellular differentiation processes. Here, we infer the molecular regulatory network that controls the differentiation of a blood cell subpopulation derived from the granulocyte-monocyte precursor (GMP), comprising monocytes, neutrophils, eosinophils, basophils and mast cells. We integrate published qualitative experimental data into a model to describe temporal expression patterns observed in GMP-derived cells. The model is implemented as a Boolean network, and its dynamical behavior is studied. Steady states of the network can be clearly identified with the expression profiles of monocytes, mast cells, neutrophils, basophils, and eosinophils, under wild-type and mutant backgrounds. All scripts are publicly available at https://github.com/caramirezal/RegulatoryNetworkGMPModel. lmendoza@biomedicas.unam.mx. Supplementary data are available at Bioinformatics online.

Characterization of the proteins comprising the integral matrix of Strongylocentrotus purpuratus embryonic spicules

Science.gov (United States)

Killian, C. E.; Wilt, F. H.

1996-01-01

In the present study, we enumerate and characterize the proteins that comprise the integral spicule matrix of the Strongylocentrotus purpuratus embryo. Two-dimensional gel electrophoresis of [35S]methionine radiolabeled spicule matrix proteins reveals that there are 12 strongly radiolabeled spicule matrix proteins and approximately three dozen less strongly radiolabeled spicule matrix proteins. The majority of the proteins have acidic isoelectric points; however, there are several spicule matrix proteins that have more alkaline isoelectric points. Western blotting analysis indicates that SM50 is the spicule matrix protein with the most alkaline isoelectric point. In addition, two distinct SM30 proteins are identified in embryonic spicules, and they have apparent molecular masses of approximately 43 and 46 kDa. Comparisons between embryonic spicule matrix proteins and adult spine integral matrix proteins suggest that the embryonic 43-kDa SM30 protein is an embryonic isoform of SM30. An adult 49-kDa spine matrix protein is also identified as a possible adult isoform of SM30. Analysis of the SM30 amino acid sequences indicates that a portion of SM30 proteins is very similar to the carbohydrate recognition domain of C-type lectin proteins.

Global Derivatives Market

Directory of Open Access Journals (Sweden)

Stankovska Aleksandra

2017-06-01

Full Text Available Globalization of financial markets led to the enormous growth of volume and diversification of financial transactions. Financial derivatives were the basic elements of this growth. Derivatives play a useful and important role in hedging and risk management, but they also pose several dangers to the stability of financial markets and thereby the overall economy. Derivatives are used to hedge and speculate the risk associated with commerce and finance.

A combination vaccine comprising of inactivated enterovirus 71 and coxsackievirus A16 elicits balanced protective immunity against both viruses.

Science.gov (United States)

Cai, Yicun; Ku, Zhiqiang; Liu, Qingwei; Leng, Qibin; Huang, Zhong

2014-05-01

Enterovirus 71 (EV71) and coxsackievirus A16 (CA16) are the two major causative agents of hand, foot and mouth disease (HFMD), which is an infectious disease frequently occurring in children. A bivalent vaccine against both EV71 and CA16 is highly desirable. In the present study, we compare monovalent inactivated EV71, monovalent inactivated CA16, and a combination vaccine candidate comprising of both inactivated EV71 and CA16, for their immunogenicity and in vivo protective efficacy. The two monovalent vaccines were found to elicit serum antibodies that potently neutralized the homologous virus but had no or weak neutralization activity against the heterologous one; in contrast, the bivalent vaccine immunized sera efficiently neutralized both EV71 and CA16. More importantly, passive immunization with the bivalent vaccine protected mice against either EV71 or CA16 lethal infections, whereas the monovalent vaccines only prevented the homologous but not the heterologous challenges. Together, our results demonstrate that the experimental bivalent vaccine comprising of inactivated EV71 and CA16 induces a balanced protective immunity against both EV71 and CA16, and thus provide proof-of-concept for further development of multivalent vaccines for broad protection against HFMD. Copyright © 2014 Elsevier Ltd. All rights reserved.

A Military Guide to Terrorism in the Twenty-First Century. U.S. Army DCSINT Handbook No. 1 (Version 3.0)

Science.gov (United States)

2005-08-15

or varnished brown Length: 102mm Width: 61mm Weight: 773g Filler: Amatol Characteristics Color: Black and unmarked Length: 131mm Width: 55mm...isocyanate Diborane Boron tribromide Nitrogen dioxide Ethylene oxide Carbon monoxide Phosphine Fluorine Carbonyl sulfide Phosphorus oxychloride

Reusable Mg-Al hydrotalcites for the catalytic synthesis of diglycerol dicarbonate from diglycerol and dimethyl carbonate

NARCIS (Netherlands)

Stewart, Joseph A.; Weckhuysen, Bert M.; Bruijnincx, Pieter C A

2014-01-01

Diglycerol dicarbonate, which has been highlighted as a potential monomer for the production of non-isocyanate polyurethanes, has been synthesised using as-synthesised hydrotalcites of varying magnesium-to-aluminium ratio as catalyst materials. The hydrotalcite materials were aged for two different

Highly regio- and diastereoselective, acidic clay supported intramolecular nitrile oxide-alkene cycloaddition on D-ribose derived nitriles: an efficient synthetic route to isoxazoline fused five and six membered carbocycles.

Science.gov (United States)

Panda, Amarendra; Das, Sulagna; Pal, Shantanu

2014-10-29

An efficient synthetic route to isoxazoline fused carbocycles from carbohydrate scaffolds that comprise of free hydroxyl group(s) is described with high regio- and stereoselectivity. Montmorillonite K-10/chloramine T oxidation and in situ intramolecular nitrile oxide-alkene cycloaddition (INOC) of D-ribose derived oximes have been developed for the diversity oriented synthesis of isoxazoline fused five and six membered carbocycles. Copyright © 2014 Elsevier Ltd. All rights reserved.

A Dew Point Meter Comprising a Nanoporous Thin Film Alumina Humidity Sensor with a Linearizing Capacitance Measuring Electronics

Directory of Open Access Journals (Sweden)

Dilip Kumar Ghara

2008-02-01

Full Text Available A novel trace moisture analyzer is presented comprising a capacitive nanoporous film of metal oxide sensor and electronics. The change in capacity of the sensor is due to absorption of water vapor by the pores. A simple capacitance measuring electronics is developed which can detect any change in capacitance and correlates to ambient humidity. The circuit can minimize the parasitic earth capacitance. The non linear response of the sensor is linearized with a micro-controller linearizing circuit. The experimental result shows a resolution of -4°C DP and accuracy within 2%.

Derivatives in emerging markets

OpenAIRE

Dubravko Mihaljek; Frank Packer

2010-01-01

Turnover of derivatives has grown more rapidly in emerging markets than in developed countries. Foreign exchange derivatives are the most commonly traded of all risk categories, with increasingly frequent turnover in emerging market currencies and a growing share of cross-border transactions. As the global reach of the financial centres in emerging Asia has expanded, the offshore trading of many emerging market currency derivatives has risen as well. Growth in derivatives turnover is positive...

fq-Derivations of G-Algebra

Directory of Open Access Journals (Sweden)

Deena Al-Kadi

2016-01-01

Full Text Available We introduce the notion of fq-derivation as a new derivation of G-algebra. For an endomorphism map f of any G-algebra X, we show that at least one fq-derivation of X exists. Moreover, for such a map, we show that a self-map dqf of X is fq-derivation of X if X is an associative medial G-algebra. For a medial G-algebra X, dqf is fq-derivation of X if dqf is an outside fq-derivation of X. Finally, we show that if f is the identity endomorphism of X then the composition of two fq-derivations of X is a fq-derivation. Moreover, we give a condition to get a commutative composition.

Electricity derivatives

CERN Document Server

Aïd, René

2015-01-01

Offering a concise but complete survey of the common features of the microstructure of electricity markets, this book describes the state of the art in the different proposed electricity price models for pricing derivatives and in the numerical methods used to price and hedge the most prominent derivatives in electricity markets, namely power plants and swings. The mathematical content of the book has intentionally been made light in order to concentrate on the main subject matter, avoiding fastidious computations. Wherever possible, the models are illustrated by diagrams. The book should allow prospective researchers in the field of electricity derivatives to focus on the actual difficulties associated with the subject. It should also offer a brief but exhaustive overview of the latest techniques used by financial engineers in energy utilities and energy trading desks.

Isolation and characterization of biochar-derived organic matter fractions and their phenanthrene sorption.

Science.gov (United States)

Jin, Jie; Sun, Ke; Liu, Wei; Li, Shiwei; Peng, Xianqiang; Yang, Yan; Han, Lanfang; Du, Ziwen; Wang, Xiangke

2018-05-01

Chemical composition and pollutant sorption of biochar-derived organic matter fractions (BDOMs) are critical for understanding the long-term environmental significance of biochar. Phenanthrene (PHE) sorption by the humic acid-like (HAL) fractions isolated from plant straw- (PLABs) and animal manure-based (ANIBs) biochars, and the residue materials (RES) after HAL extraction was investigated. The HAL fraction comprised approximately 50% of organic carbon (OC) of the original biochars. Results of XPS and 13 C NMR demonstrated that the biochar-derived HAL fractions mainly consisted of aromatic clusters substituted by carboxylic groups. The CO 2 cumulative surface area of BDOMs excluding PLAB-derived RES fractions was obviously lower than that of corresponding biochars. The sorption nonlinearity of PHE by the fresh biochars was significantly stronger than that of the BDOM fractions, implying that the BDOM fractions were more chemically homogeneous. The BDOMs generally exhibited comparable or higher OC-normalized distribution coefficients (K oc ) of PHE than the original biochars. The PHE logK oc values of the fresh biochars correlated negatively with the micropore volumes due to steric hindrance effect. In contrast, a positive relationship between the sorption coefficients (K d ) of BDOMs and the micropore volumes was observed in this study, suggesting that pore filling could dominate PHE sorption by the BDOMs. The positive correlation between the PHE logK oc values of the HAL fractions and the aromatic C contents indicates that PHE sorption by the HAL fractions was regulated by aromatic domains. The findings of this study improve our knowledge of the evolution of biochar properties after application and its potential environmental impacts. Copyright © 2018 Elsevier Ltd. All rights reserved.

Synthesis of hybrid polymers of beta-Cd and siloxanes

International Nuclear Information System (INIS)

Abbehausen, Camilla; Yoshida, Inez V.P.

2009-01-01

Hybrid polymers derived from siloxane and β-cyclodextrin (β-CD) were obtained from gamma-isocyanate-propyl-triethoxy-silane (IPTS) and β-CD. The resulting alkoxysilane was hydrolyzed generating glassy β-CD modified polysilsesquioxane. The alkoxysilane was also submitted to condensation with poly(dimethylsiloxane) with - Si(CH 3 -) 2 -OH end groups, giving rise to a polymeric network with β-CD at crosslinking nodes. These materials were characterized by infrared spectrum, 13 C and 29 Si nuclear magnetic resonance and X ray diffraction. The thermal behavior was analyzed by thermogravimetry. The capability of β-CD grafted in the siloxane polymers to form inclusion complexes was evaluated by the formation of β-CD-phenolphthalein complex, by UV-vis spectrum. The ability of water diffusion into β-CD-PSS film was evaluated by swollen measurement. β-CD-modified siloxanes were able to form films and their morphologies were evaluated by scanning electron microscopy. (author)

Industrial Hygiene.

Science.gov (United States)

Langhorst, Marsha L.; Coyne, Linda B.

1989-01-01

Presents a review focusing on some of the most widely used analytical techniques in monitoring personal exposures in the workplace for assessing human health risk. Discusses several basic techniques: solid sorbents, calibration standards, derivatizations, dosimeters, biomonitoring, gas monitoring, particulates, isocyanates, formaldehyde, and…

Physico-chemical, thermal and electrical properties of the fabricated ...

African Journals Online (AJOL)

We successfully fabricated polyurethane (PU) thin films deposited on glass substrates utilizing bio-based epoxidized soybean oil (ESBO) via spin coating technique. Prior to deposition, one-shot polymerization condensation reaction was made by reacting varied amount of ESBO-based polyols with isocyanate.

Covalent bonding of PMMA, PBMA, and poly(HEMA) to hydroxyapatite particles

NARCIS (Netherlands)

Liu, Q.; de Wijn, J.R.; van Blitterswijk, Clemens

1998-01-01

In our earlier study, we showed that the surface hydroxyl groups of hydroxyapatite have the ability to react with organic isocyanate groups. In this study, the feasibility of grafting poly(methyl methacrylate) (PMMA), poly(n-butyl methacrylate) (PBMA), and Poly(hydroxyethyl methacrylate)

Structural analysis and taste evaluation of γ-glutamyl peptides comprising sulfur-containing amino acids.

Science.gov (United States)

Amino, Yusuke; Wakabayashi, Hidehiko; Akashi, Satoko; Ishiwatari, Yutaka

2018-03-01

The structures, flavor-modifying effects, and CaSR activities of γ-glutamyl peptides comprising sulfur-containing amino acids were investigated. The chemical structures, including the linkage mode of the N-terminal glutamic acid, of γ-L-glutamyl-S-(2-propenyl)-L-cysteine (γ-L-glutamyl-S-allyl-L-cysteine) and its sulfoxide isolated from garlic were established by comparing their NMR spectra with those of authentic peptides prepared using chemical methods. Mass spectrometric analysis also enabled determination of the linkage modes in the glutamyl dipeptides by their characteristic fragmentation. In sensory evaluation, these peptides exhibited flavor-modifying effects (continuity) in umami solutions less pronounced but similar to that of glutathione. Furthermore, the peptides exhibited intrinsic flavor due to the sulfur-containing structure, which may be partially responsible for their flavor-modifying effects. In CaSR assays, γ-L-glutamyl-S-methyl-L-cysteinylglycine was most active, which indicates that the presence of a medium-sized aliphatic substituent at the second amino acid residue in γ-glutamyl peptides enhances CaSR activity.

SYNTHESIS OF FLAVANONE-6-CARBOXYLIC ACID DERIVATIVES FROM SALICYLIC ACID DERIVATIVE

Directory of Open Access Journals (Sweden)

Muhammad Idham Darussalam Mardjan

2012-02-01

Full Text Available Synthesis of flavanone-6-carboxylic acid derivatives had been conducted via the route of chalcone. The synthesis was carried out from salicylic acid derivative, i.e. 4-hydroxybenzoic acid, via esterification, Fries rearrangement, Claisen-Schmidt condensation and 1,4-nucleophilic addition reactions. Structure elucidation of products was performed using FT-IR, 1H-NMR, GC-MS and UV-Vis spectrometers. Reaction of 4-hydroxybenzoic acid with methanol catalyzed with sulfuric acid produced methyl 4-hydroxybenzoate in 87% yield. The acid-catalyzed-acetylation of the product using acetic anhydride gave methyl 4-acetoxybenzoate in 75% yield. Furthermore, solvent-free Fries rearrangement of methyl 4-acetoxybenzoate in the presence of AlCl3 produced 3-acetyl-4-hydroxybenzoic acid as the acetophenone derivatives in 67% yield. Then, Claisen-Schmidt condensation of the acetophenone and benzaldehyde derivatives of p-anisaldehyde and veratraldehyde in basic condition gave 2'-hydroxychalcone-5'-carboxylic acid derivatives  in 81 and 71 % yield, respectively. Finally, the ring closure reaction of the chalcone yielded the corresponding flavanone-6-carboxylic acids in 67 and 59% yield, respectively.

Allergy assessment of foods or ingredients derived from biotechnology, gene-modified organisms, or novel foods

DEFF Research Database (Denmark)

Poulsen, Lars K.

2004-01-01

E (IgE) cross-reactions to known allergens, digestability studies of the proteins in simulated gastric and/or intestinal fluids, and animal studies. These steps are discussed and five examples of risk evaluation of GMOs or novel foods are presented. These include ice-structuring protein derived from......The introduction of novel proteins into foods carries a risk of eliciting allergic reactions in individuals sensitive to the introduced protein and a risk of sensitizing susceptible individuals. No single predictive test exists to perform a hazard assessment in relation to allergenic properties...... of newly expressed proteins in gene-modified organisms (GMOs). Instead, performance of a weighted risk analysis based on the decision tree approach has been suggested. The individual steps of this analysis comprise sequence homology to known allergens, specific or targeted serum screens for immunoglobulin...

Guided wave propagation and scattering in pipeworks comprising elbows: Theoretical and experimental results

International Nuclear Information System (INIS)

Bakkali, M El; Lhémery, A; Baronian, V; Chapuis, B

2015-01-01

Elastic guided waves (GW) are used to inspect pipeworks in various industries. Modelling tools for simulating GW inspection are necessary to understand complex scattering phenomena occurring at specific features (welds, elbows, junctions...). In pipeworks, straight pipes coexist with elbows. GW propagation in the former cases is well-known, but is less documented in the latter. Their scattering at junction of straight and curved pipes constitutes a complex phenomenon. When a curved part is joined to two straight parts, these phenomena couple and give rise to even more complex wave structures. In a previous work, the SemiAnalytic Finite Element method extended to curvilinear coordinates was used to handle GW propagation in elbows, combined with a mode matching method to predict their scattering at the junction with a straight pipe. Here, a pipework comprising an arbitrary number of elbows of finite length and of different curvature linking straight pipes is considered. A modal scattering matrix is built by cascading local scattering and propagation matrices. The overall formulation only requires meshing the pipe section to compute both the modal solutions and the integrals resulting from the mode-matching method for computing local scattering matrices. Numerical predictions using this approach are studied and compared to experiments

New recombinant bacterium comprises a heterologous gene encoding glycerol dehydrogenase and/or an up-regulated native gene encoding glycerol dehydrogenase, useful for producing ethanol

DEFF Research Database (Denmark)

2010-01-01

dehydrogenase encoding region of the bacterium, or is inserted into a phosphotransacetylase encoding region of the bacterium, or is inserted into an acetate kinase encoding region of the bacterium. It is operably linked to an inducible, a regulated or a constitutive promoter. The up-regulated glycerol......TECHNOLOGY FOCUS - BIOTECHNOLOGY - Preparation (claimed): Producing recombinant bacterium having enhanced ethanol production characteristics when cultivated in growth medium comprising glycerol comprises: (a) transforming a parental bacterium by (i) the insertion of a heterologous gene encoding...... glycerol dehydrogenase; and/or (ii) up-regulating a native gene encoding glycerol dehydrogenase; and (b) obtaining the recombinant bacterium. Preferred Bacterium: In the recombinant bacterium above, the inserted heterologous gene and/or the up-regulated native gene is encoding a glycerol dehydrogenase...

A novel off-grid hybrid power system comprised of solar photovoltaic, wind, and hydro energy sources

International Nuclear Information System (INIS)

Bhandari, Binayak; Lee, Kyung-Tae; Lee, Caroline Sunyong; Song, Chul-Ki; Maskey, Ramesh K.; Ahn, Sung-Hoon

2014-01-01

Highlights: • We propose two hybridization methods for small off-grid power systems consisting solar (PV), wind, and micro-hydro sources. • One of the methods was implemented in a mini-grid connecting Thingan and Kolkhop villages in Makawanpur District, Nepal. • The results can be applied to help achieve Millennium Development Goal 7: Ensuring environmental sustainability. • This is the first implementation anywhere comprising of three renewable energy power, in a single off-grid power system. • This research may be applied as a practical guide for implementing similar systems in various locations. - Abstract: Several factors must be considered before adopting a full-phase power generation system based on renewable energy sources. Long-term necessary data (for one year if possible) should be collected before making any decisions concerning implementation of such a systems. To accurately assess the potential of available resources, we measured solar irradiation, wind speed, and ambient temperature at two high-altitude locations in Nepal: the Lama Hotel in Rasuwa District and Thingan in Makawanpur District. Here, we propose two practical, economical hybridization methods for small off-grid systems consisting entirely of renewable energy sources—specifically solar photovoltaic (PV), wind, and micro-hydro sources. One of the methods was tested experimentally, and the results can be applied to help achieve Millennium Development Goal 7: Ensuring environmental sustainability. Hydro, wind, and solar photovoltaic energy are the top renewable energy sources in terms of globally installed capacity. However, no reports have been published about off-grid hybrid systems comprised of all three sources, making this implementation the first of its kind anywhere. This research may be applied as a practical guide for implementing similar systems in various locations. Of the four off-grid PV systems installed by the authors for village electrification in Nepal, one was

Development of a fast curing tissue adhesive for meniscus tear repair.

Science.gov (United States)

Bochyńska, Agnieszka Izabela; Hannink, Gerjon; Janssen, Dennis; Buma, Pieter; Grijpma, Dirk W

2017-01-01

Isocyanate-terminated adhesive amphiphilic block copolymers are attractive materials to treat meniscus tears due to their tuneable mechanical properties and good adhesive characteristics. However, a drawback of this class of materials is their relatively long curing time. In this study, we evaluate the use of an amine cross-linker and addition of catalysts as two strategies to accelerate the curing rates of a recently developed biodegradable reactive isocyanate-terminated hyper-branched adhesive block copolymer prepared from polyethylene glycol (PEG), trimethylene carbonate, citric acid and hexamethylene diisocyanate. The curing kinetics of the hyper-branched adhesive alone and in combination with different concentrations of spermidine solutions, and after addition of 2,2-dimorpholinodiethylether (DMDEE) or 1,4-diazabicyclo [2.2.2] octane (DABCO) were determined using FTIR. Additionally, lap-shear adhesion tests using all compositions at various time points were performed. The two most promising compositions of the fast curing adhesives were evaluated in a meniscus bucket handle lesion model and their performance was compared with that of fibrin glue. The results showed that addition of both spermidine and catalysts to the adhesive copolymer can accelerate the curing rate and that firm adhesion can already be achieved after 2 h. The adhesive strength to meniscus tissue of 3.2-3.7 N was considerably higher for the newly developed compositions than for fibrin glue (0.3 N). The proposed combination of an adhesive component and a cross-linking component or catalyst is a promising way to accelerate curing rates of isocyanate-terminated tissue adhesives.

In vitro generation of three-dimensional substrate-adherent embryonic stem cell-derived neural aggregates for application in animal models of neurological disorders.

Science.gov (United States)

Hargus, Gunnar; Cui, Yi-Fang; Dihné, Marcel; Bernreuther, Christian; Schachner, Melitta

2012-05-01

In vitro-differentiated embryonic stem (ES) cells comprise a useful source for cell replacement therapy, but the efficiency and safety of a translational approach are highly dependent on optimized protocols for directed differentiation of ES cells into the desired cell types in vitro. Furthermore, the transplantation of three-dimensional ES cell-derived structures instead of a single-cell suspension may improve graft survival and function by providing a beneficial microenvironment for implanted cells. To this end, we have developed a new method to efficiently differentiate mouse ES cells into neural aggregates that consist predominantly (>90%) of postmitotic neurons, neural progenitor cells, and radial glia-like cells. When transplanted into the excitotoxically lesioned striatum of adult mice, these substrate-adherent embryonic stem cell-derived neural aggregates (SENAs) showed significant advantages over transplanted single-cell suspensions of ES cell-derived neural cells, including improved survival of GABAergic neurons, increased cell migration, and significantly decreased risk of teratoma formation. Furthermore, SENAs mediated functional improvement after transplantation into animal models of Parkinson's disease and spinal cord injury. This unit describes in detail how SENAs are efficiently derived from mouse ES cells in vitro and how SENAs are isolated for transplantation. Furthermore, methods are presented for successful implantation of SENAs into animal models of Huntington's disease, Parkinson's disease, and spinal cord injury to study the effects of stem cell-derived neural aggregates in a disease context in vivo.

Superstability for Generalized Module Left Derivations and Generalized Module Derivations on a Banach Module (I

Directory of Open Access Journals (Sweden)

Rassias JM

2009-01-01

Full Text Available We discuss the superstability of generalized module left derivations and generalized module derivations on a Banach module. Let be a Banach algebra and a Banach -module, and . The mappings , and are defined and it is proved that if (resp., is dominated by then is a generalized (resp., linear module- left derivation and is a (resp., linear module- left derivation. It is also shown that if (resp., is dominated by then is a generalized (resp., linear module- derivation and is a (resp., linear module- derivation.

Anti corrosion layer for stainless steel in molten carbonate fuel cell - comprises phase vapour deposition of titanium nitride, aluminium nitride or chromium nitride layer then oxidising layer in molten carbonate electrolyte

DEFF Research Database (Denmark)

2000-01-01

Forming an anticorrosion protective layer on a stainless steel surface used in a molten carbonate fuel cell (MCFC) - comprises the phase vapour deposition (PVD) of a layer comprising at least one of titanium nitride, aluminium nitride or chromium nitride and then forming a protective layer in situ...

CHRIS: Hazardous Chemical Data

Science.gov (United States)

1978-10-01

CPLORD-O-TOLUICIfE FAST RED Z& BASE = ’-1-ITRCAMILINE FERMENTAITION ALCOH!OL - ETHYL ALCOHOL FERMENTATION AMYL ALCOHCL -ISCANYL ALCOJIGI FERMENTATION BUTYL...ACID ETHYLENEDIAMINE IETRACETIC ACID VIC-H-XYLENOL XYLENOL VIENNA GREEN COPPER ACETOARSE1ITE VILRATHANE 4300 -CIPHENYLETHAME01ISOCYANATE (MDIl VINEGAR

Free radical and thermal curing of terpyridine-modified terpolymers

NARCIS (Netherlands)

Hofmeier, H.; El-Ghayoury, A.; Schubert, U.S.

2004-01-01

Terpolymers bearing terpyridine as well as (meth)acrylates as free radical curable groups (UV-curing) or hydroxyl groups (thermal curing with bis-isocyanates) were synthesized and characterized using 1H NMR, IR and UV-vis spectroscopy as well as GPC. Subsequently, the ability of covalent

Journal of Chemical Sciences | Indian Academy of Sciences

Indian Academy of Sciences (India)

The insertion reactions of zirconium(IV) -butoxide and titanium(IV) -butoxide with a heterocumulene like carbodiimide, carbon dioxide or phenyl isocyanate are compared. Both give an intermediate which carries out metathesis at elevated temperatures by inserting a second heterocumulene in a head-to-head fashion.

Light-controlled supramolecular helicity of a liquid crystalline phase using a helical polymer functionalized with a single chiroptical molecular switch

NARCIS (Netherlands)

Pijper, Dirk; Jongejan, Mahthild G. M.; Meetsma, Auke; Feringa, Ben L.

2008-01-01

Control over the preferred helical sense of a poly(n-hexyl isocyanate) (PHIC) by using a single light-driven molecular motor, covalently attached at the polymer's terminus, has been accomplished in solution via a combination of photochemical and thermal isomerizations. Here, we report that after

Adaptive synchronization of the complex dynamical network with non-derivative and derivative coupling

Energy Technology Data Exchange (ETDEWEB)

Xu Yuhua, E-mail: yuhuaxu2004@163.co [College of Information Science and Technology, Donghua University, Shanghai 201620 (China) and Department of Maths, Yunyang Teachers' College, Hubei 442000 (China); Zhou Wuneng, E-mail: wnzhou@163.co [College of Information Science and Technology, Donghua University, Shanghai 201620 (China); Fang Jian' an [College of Information Science and Technology, Donghua University, Shanghai 201620 (China); Sun Wen [School of Mathematics and Information, Yangtze University, Hubei Jingzhou 434023 (China)

2010-04-05

This Letter investigates the synchronization of a general complex dynamical network with non-derivative and derivative coupling. Based on LaSalle's invariance principle, adaptive synchronization criteria are obtained. Analytical result shows that under the designed adaptive controllers, a general complex dynamical network with non-derivative and derivative coupling can asymptotically synchronize to a given trajectory, and several useful criteria for synchronization are given. What is more, the coupling matrix is not assumed to be symmetric or irreducible. Finally, simulations results show the method is effective.

Credit derivatives in emerging markets

OpenAIRE

Romain Rancière

2002-01-01

Credit Derivatives are securities that offer protection against credit or default risk of bonds or loans. The credit derivatives emerging market has grown rapidly and credit derivatives are widely used. This paper describes the emerging credit derivatives market structure. The current market activity is analyzed through elementary pricing dynamics and the study of the term structure of default risk. Focusing on the performance of credit derivatives in stress situation, including legal and mar...

Hydrolysis of isocyanic acid on SCR catalysts

Energy Technology Data Exchange (ETDEWEB)

Elsener, M; Kleemann, M; Koebel, M [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

1999-08-01

Standard SCR catalysts possess high activity for the hydrolysis of HNCO and thus explain the suitability of urea as a selective reducing agent for NO{sub x}. At high space velocities HNCO-slip can get perceptible over the entire temperature range. This can be attributed to the fact that the temperature dependence is strong for the SCR reaction, but weak for the hydrolysis reaction. (author) 3 figs., 5 refs.

Vitamin D derivatives

International Nuclear Information System (INIS)

Deluca, H.F.; Schnoes, H.K.; Napoli, J.L.; Fivizzani, M.A.

1982-01-01

The chemical preparation of 26,27-isotopically labelled vitamin D 3 derivatives of high specific activity is described. These labelled vitamin D derivatives are useful in the determination of vitamin D metabolite levels in the blood and tissues of man and animals. (U.K.)

Credit derivatives and risk management

OpenAIRE

Michael S. Gibson

2007-01-01

The striking growth of credit derivatives suggests that market participants find them to be useful tools for risk management. I illustrate the value of credit derivatives with three examples. A commercial bank can use credit derivatives to manage the risk of its loan portfolio. An investment bank can use credit derivatives to manage the risks it incurs when underwriting securities. An investor, such as an insurance company, asset manager, or hedge fund, can use credit derivatives to align its...

Systematic derivation of an Australian standard for Tall Man lettering to distinguish similar drug names.

Science.gov (United States)

Emmerton, Lynne; Rizk, Mariam F S; Bedford, Graham; Lalor, Daniel

2015-02-01

Confusion between similar drug names can cause harmful medication errors. Similar drug names can be visually differentiated using a typographical technique known as Tall Man lettering. While international conventions exist to derive Tall Man representation for drug names, there has been no national standard developed in Australia. This paper describes the derivation of a risk-based, standardized approach for use of Tall Man lettering in Australia, and known as National Tall Man Lettering. A three-stage approach was applied. An Australian list of similar drug names was systematically compiled from the literature and clinical error reports. Secondly, drug name pairs were prioritized using a risk matrix based on the likelihood of name confusion (a four-component score) vs. consensus ratings of the potential severity of the confusion by 31 expert reviewers. The mid-type Tall Man convention was then applied to derive the typography for the highest priority drug pair names. Of 250 pairs of confusable Australian drug names, comprising 341 discrete names, 35 pairs were identified by the matrix as an 'extreme' risk if confused. The mid-type Tall Man convention was successfully applied to the majority of the prioritized drugs; some adaption of the convention was required. This systematic process for identification of confusable drug names and associated risk, followed by application of a convention for Tall Man lettering, has produced a standard now endorsed for use in clinical settings in Australia. Periodic updating is recommended to accommodate new drug names and error reports. © 2014 John Wiley & Sons, Ltd.

Microstructure and corrosion behavior of shielded metal arc-welded dissimilar joints comprising duplex stainless steel and low alloy steel

Science.gov (United States)

Srinivasan, P. Bala; Muthupandi, V.; Sivan, V.; Srinivasan, P. Bala; Dietzel, W.

2006-12-01

This work describes the results of an investigation on a dissimilar weld joint comprising a boiler-grade low alloy steel and duplex stainless steel (DSS). Welds produced by shielded metal arc-welding with two different electrodes (an austenitic and a duplex grade) were examined for their microstructural features and properties. The welds were found to have overmatching mechanical properties. Although the general corrosion resistance of the weld metals was good, their pitting resistance was found to be inferior when compared with the DSS base material.

A continuous culture system of direct somatic embryogenesis in microspore-derived embryos of Brassica juncea.

Science.gov (United States)

Prabhudesai, V; Bhaskaran, S

1993-03-01

An efficient culture system has been developed for repeated cycles of somatic embryogenesis in microspore-derived embryos of Brassica juncea without a callus phase. Haploid embryos produced through anther culture showed a high propensity for direct production of somatic embryos in response to 2 mgL(-1) BA and 0.1 mgL(-1) NAA. The embryogenic cultures which comprised the elongated embryonal axis of microspore-derived embryos when explanted and grown on the medium of same composition produced a large number of secondary embryos. These somatic embryos in turn underwent axis elongation and produced more somatic embryos when explanted and cultured. This cycle of repetitive somatic embryogenesis continued with undiminished vigour passage after passage and was monitored for more than a year. Somatic embryos from any passage when isolated at cotyledonary stage and grown on auxin-free medium for 5 days and then on a medium containing NAA (0.1 mgL(-1)), developed into complete plants with a profuse root system and were easily established in the soil. The cytology of the root tips of these plants confirmed their haploid nature. The total absence of callus phase makes the system ideal for continuous cloning of androgenic lines, Agrobacterium-mediated transformation and mutation induction studies.

Conditional non-independence of radiographic image features and the derivation of post-test probabilities – A mammography BI-RADS example

International Nuclear Information System (INIS)

Benndorf, Matthias

2012-01-01

Bayes' theorem has proven to be one of the cornerstones in medical decision making. It allows for the derivation of post-test probabilities, which in case of a positive test result become positive predictive values. If several test results are observed successively Bayes' theorem may be used with assumed conditional independence of test results or with incorporated conditional dependencies. Herein it is examined whether radiographic image features should be considered conditionally independent diagnostic tests when post-test probabilities are to be derived. For this purpose the mammographic mass dataset from the UCI (University of California, Irvine) machine learning repository is analysed. It comprises the description of 961 (516 benign, 445 malignant) mammographic mass lesions according to the BI-RADS (Breast Imaging: Reporting and Data System) lexicon. Firstly, an exhaustive correlation matrix is presented for mammography BI-RADS features among benign and malignant lesions separately; correlation can be regarded as measure for conditional dependence. Secondly, it is shown that the derived positive predictive values for the conjunction of the two features “irregular shape” and “spiculated margin” differ significantly depending on whether conditional dependencies are incorporated into the decision process or not. It is concluded that radiographic image features should not generally be regarded as conditionally independent diagnostic tests.

Methods for applying microchannels to separate methane using liquid absorbents, especially ionic liquid absorbents from a mixture comprising methane and nitrogen

Science.gov (United States)

Tonkovich, Anna Lee Y [Dublin, OH; Litt, Robert D [Westerville, OH; Dongming, Qiu [Dublin, OH; Silva, Laura J [Plain City, OH; Lamont, Micheal Jay [Plain City, OH; Fanelli, Maddalena [Plain City, OH; Simmons, Wayne W [Plain city, OH; Perry, Steven [Galloway, OH

2011-10-04

Methods of using microchannel separation systems including absorbents to improve thermal efficiency and reduce parasitic power loss. Energy is typically added to desorb methane and then energy or heat is removed to absorb methane using a working solution. The working solution or absorbent may comprise an ionic liquid, or other fluids that demonstrate a difference in affinity between methane and nitrogen in a solution.

European Scientific Notes. Volume 37, Number 9.

Science.gov (United States)

1983-09-30

isocyanates, have been crosslinked production of ethyl alcohol from glucose with water (See Klein and Manecke, using whole yeast cells in epoxy-based 1982...more specialized studies ic particles. Dr. J.L. Sarmiento were presented. (Princeton Univ., US) presented prelim- Dr. P.G. Brewer (National Science inary

Research Article Special Issue

African Journals Online (AJOL)

pc

2018-04-18

Apr 18, 2018 ... prepared by coating the mixed solution on transparent polycarbonate substrate using spinning ... The sensitivity (speed of color changing), fatigue resistance to UV source and color ... to add isocyanate crosslinking agent for curing process. ... The average thickness of coated layer is less than 150 micron.

Occurrence of pyrrolizidine alkaloids in animal- and plant-derived food: results of a survey across Europe.

Science.gov (United States)

Mulder, Patrick P J; López, Patricia; Castelari, Massimo; Bodi, Dorina; Ronczka, Stefan; Preiss-Weigert, Angelika; These, Anja

2018-01-01

Pyrrolizidine alkaloids (PAs) are secondary metabolites of plant families such as Asteraceae or Boraginaceae and are suspected to be genotoxic carcinogens. Recent investigations revealed their frequent occurrence in honey and particularly in tea. To obtain a comprehensive overview of the PA content in animal- and plant-derived food from the European market, and to provide a basis for future risk analysis, a total of 1105 samples were collected in 2014 and 2015. These comprised milk and milk products, eggs, meat and meat products, (herbal) teas, and (herbal) food supplements collected in supermarkets, retail shops, and via the internet. PAs were detected in a large proportion of plant-derived foods: 91% of the (herbal) teas and 60% of the food supplements contained at least one individual PA. All types of (herbal) teas investigated were found to contain PAs, with a mean concentration of 460 µg kg -1 dry tea (corresponding to 6.13 µg L -1 in [herbal] tea infusion). The highest mean concentrations were found in rooibos tea (599 µg kg -1 dry tea, 7.99 µg L -1 tea infusion) and the lowest in camomile tea (274 µg kg -1 dry tea, 3.65 µg L -1 tea infusion). Occurrence of PAs in food supplements was found to be highly variable, but in comparable ranges as for (herbal) tea. The highest concentrations were present in supplements containing plant material from known PA-producing plants. In contrast, only 2% of the animal-derived products, in particular 6% of milk samples and 1% of egg samples, contained PAs. Determined levels in milk were relatively low, ranged between 0.05 and 0.17 µg L -1 and only trace amounts of 0.10-0.12 µg kg -1 were found in eggs. No PAs were detected in the other animal-derived products.

Exploring the Oxidation of Lignin-Derived Phenols by a Library of Laccase Mutants

Directory of Open Access Journals (Sweden)

Isabel Pardo

2015-09-01

Full Text Available Saturation mutagenesis was performed over six residues delimiting the substrate binding pocket of a fungal laccase previously engineered in the lab. Mutant libraries were screened using sinapic acid as a model substrate, and those mutants presenting increased activity were selected for exploring the oxidation of lignin-derived phenols. The latter comprised a battery of phenolic compounds of interest due to their use as redox mediators or precursors of added-value products and their biological activity. The new laccase variants were investigated in a multi-screening assay and the structural determinants, at both the substrate and the protein level, for the oxidation of the different phenols are discussed. Laccase activity greatly varied only by changing one or two residues of the enzyme pocket. Our results suggest that once the redox potential threshold is surpassed, the contribution of the residues of the enzymatic pocket for substrate recognition and binding strongly influence the overall rate of the catalytic reaction.

An inequality for detecting financial fraud, derived from the Markowitz Optimal Portfolio Theory

Science.gov (United States)

Bard, Gregory V.

2016-12-01

The Markowitz Optimal Portfolio Theory, published in 1952, is well-known, and was often taught because it blends Lagrange Multipliers, matrices, statistics, and mathematical finance. However, the theory faded from prominence in American investing, as Business departments at US universities shifted from techniques based on mathematics, finance, and statistics, to focus instead on leadership, public speaking, interpersonal skills, advertising, etc… The author proposes a new application of Markowitz's Theory: the detection of a fairly broad category of financial fraud (called "Ponzi schemes" in American newspapers) by looking at a particular inequality derived from the Markowitz Optimal Portfolio Theory, relating volatility and expected rate of return. For example, one recent Ponzi scheme was that of Bernard Madoff, uncovered in December 2008, which comprised fraud totaling 64,800,000,000 US dollars [23]. The objective is to compare investments with the "efficient frontier" as predicted by Markowitz's theory. Violations of the inequality should be impossible in theory; therefore, in practice, violations might indicate fraud.

Studies on non-steroidal inhibitors of aromatase enzyme; 4-(aryl/heteroaryl)-2-(pyrimidin-2-yl)thiazole derivatives.

Science.gov (United States)

Sahin, Zafer; Ertas, Merve; Berk, Barkın; Biltekin, Sevde Nur; Yurttas, Leyla; Demirayak, Seref

2018-05-01

Steroidal and non-steroidal aromatase inhibitors target the suppression of estrogen biosynthesis in the treatment of breast cancer. Researchers have increasingly focused on developing non-steroidal derivatives for their potential clinical use avoiding steroidal side-effects. Non-steroidal derivatives generally have planar aromatic structures attached to the azole ring system. One part of this ring system comprises functional groups that inhibit aromatization through the coordination of the haem group of the aromatase enzyme. Replacement of the triazole ring system and development of aromatic/cyclic structures of the side chain can increase selectivity over aromatase enzyme inhibition. In this study, 4-(aryl/heteroaryl)-2-(pyrimidin-2-yl)thiazole derivatives were synthesized and physical analyses and structural determination studies were performed. The IC 50 values were determined by a fluorescence-based aromatase inhibition assay and compound 1 (4-(2-hydroxyphenyl)-2-(pyrimidine-2-yl)thiazole) were found potent inhibitor of enzyme (IC 50 :0.42 nM). Then, their antiproliferative activity over MCF-7 and HEK-293 cell lines was evaluated using a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Compounds 1, 7, 8, 13, 15, 18, 21 were active against MCF-7 breast cancer cells. Lastly, a series of docking experiments were undertaken to analyze the crystal structure of human placental aromatase and identify the possible interactions between the most active structure and the active site. Copyright © 2018 Elsevier Ltd. All rights reserved.

Determination of hydrophobic coenzyme a esters and other lipids using a biosensor comprising a modified coenzyme a- and acyl-coa binding protein (acbp)

DEFF Research Database (Denmark)

2002-01-01

, food and feed preparations, tissue extracts, acyl-CoA synthetase reaction media and various laboratory conditions using a modified Coenzyme A- and acyl-CoA binding protein (ACBP) is provided. Furthermore the invention relates to a construct comprising a peptide and a signal moiety for performing...

A Respiratory Marker Derived From Left Vagus Nerve Signals Recorded With Implantable Cuff Electrodes.

Science.gov (United States)

Sevcencu, Cristian; Nielsen, Thomas N; Kjaergaard, Benedict; Struijk, Johannes J

2018-04-01

Left vagus nerve (LVN) stimulation (LVNS) has been tested for lowering the blood pressure (BP) in patients with resistant hypertension (RH). Whereas, closed-loop LVNS (CL-LVNS) driven by a BP marker may be superior to open-loop LVNS, there are situations (e.g., exercising) when hypertension is normal. Therefore, an ideal anti-RH CL-LVNS system requires a variable to avoid stimulation in such conditions, for example, a respiratory marker ideally extracted from the LVN. As the LVN conducts respiratory signals, this study aimed to investigate if such signals can be recorded using implantable means and if a marker to monitor respiration could be derived from such recordings. The experiments were performed in 14 anesthetized pigs. Five pigs were subjected to changes of the respiratory frequency and nine to changes of the respiratory volume. The LVN electroneurogram (VENG) was recorded using two cuff electrodes and the respiratory cycles (RC) using a pressure transducer. To separate the afferent and efferent VENGs, vagotomy was performed between the cuffs in the first group of pigs. The VENG was squared to derive respiration-related neural profiles (RnPs) and their correlation with the RCs was investigated in regard to timing and magnitude parameters derived from the two waveforms. The RnPs were morphologically similar with the RCs and the average RnPs represented accurate copies of the average RCs. Consequently, the lung inflation/deflation RC and RnP components had the same duration, the respiratory frequency changes affected in the same way both waveforms and the RnP amplitude increased linearly with the lung inflation in all tested pigs (R 2 values between 0.85 and 0.99). The RnPs comprise information regarding the timing and magnitude of the respiratory parameters. As those LVN profiles were derived using implantable means, this study indicates that the RnPs could serve as respiratory markers in implantable systems. © 2017 International Neuromodulation Society.

4-Aminoquinoline derivatives

DEFF Research Database (Denmark)

Singh, Shailja; Agarwal, Drishti; Sharma, Kumkum

2016-01-01

and found them to be effective against Plasmodium falciparum under in vitro conditions. Further, we selected four most active derivatives 1m, 1o, 2c and 2j and evaluated their antimalarial potential against Plasmodium berghei in vivo. These 4-aminoquinolines cured BALB/c mice infected with P. berghei......Synthetic quinoline derivatives continue to be considered as candidates for new drug discovery if they act against CQ-resistant strains of malaria even after the widespread emergence of resistance to CQ. In this study, we explored the activities of two series of new 4-aminoquinoline derivatives...... for structure activity relationship to find lead molecules for treating multidrug-resistant Plasmodium falciparum and Plasmodium vivax....

Experiment of enhancing critical current and reducing ac loss in pancake coil comprised of Ni-coated Bi-2223/Ag tape

International Nuclear Information System (INIS)

Alamgir, A.K.M.; Gu, C.; Han, Z.

2006-01-01

An approach of realizing high performance HTS coil comprised of ferromagnetic material-coated BSCCO tape is proposed. The concept of influencing critical current and ac loss is based on the magnetic shielding effect resulting in redirection of self-field flux-lines. In the previous article, ac performance of Ni-coated tape was demonstrated where the Ni-coating was introduced at the edge-regime of the finished tape in order to redirect the perpendicular component of self-field lines. In order to investigate the shielding effect on ac performance in HTS coil, a two-turn pancake coil comprised of Ni-coated Bi-2223/Ag tape is demonstrated in the present article. About 6.4% of critical current was enhanced and 30% of transport current ac loss was reduced by means of 40 μm thick and 0.3 mm long (from the edge toward center of the tape) Ni-coating. This result suggests that additional ferromagnetic loss could be compensated well by the shielding effect of the partial Ni-coating. The degree of enhancement in critical current as well as ferromagnetic impact on ac losses depend on the volume and geometry of ferromagnetic coating introduced. Therefore, it is very important to control the parameter of ferromagnetic coating of the tape in order to balance the critical current and ac loss for optimum coil performance

Experiment of enhancing critical current and reducing ac loss in pancake coil comprised of Ni-coated Bi-2223/Ag tape

Energy Technology Data Exchange (ETDEWEB)

Alamgir, A.K.M. [Department of Physics, Applied Superconductivity Research Center, Tsinghua University, Beijing 100084 (China)]. E-mail: alam643@hotmail.com; Gu, C. [Department of Physics, Applied Superconductivity Research Center, Tsinghua University, Beijing 100084 (China); Han, Z. [Department of Physics, Applied Superconductivity Research Center, Tsinghua University, Beijing 100084 (China)

2006-07-01

An approach of realizing high performance HTS coil comprised of ferromagnetic material-coated BSCCO tape is proposed. The concept of influencing critical current and ac loss is based on the magnetic shielding effect resulting in redirection of self-field flux-lines. In the previous article, ac performance of Ni-coated tape was demonstrated where the Ni-coating was introduced at the edge-regime of the finished tape in order to redirect the perpendicular component of self-field lines. In order to investigate the shielding effect on ac performance in HTS coil, a two-turn pancake coil comprised of Ni-coated Bi-2223/Ag tape is demonstrated in the present article. About 6.4% of critical current was enhanced and 30% of transport current ac loss was reduced by means of 40 {mu}m thick and 0.3 mm long (from the edge toward center of the tape) Ni-coating. This result suggests that additional ferromagnetic loss could be compensated well by the shielding effect of the partial Ni-coating. The degree of enhancement in critical current as well as ferromagnetic impact on ac losses depend on the volume and geometry of ferromagnetic coating introduced. Therefore, it is very important to control the parameter of ferromagnetic coating of the tape in order to balance the critical current and ac loss for optimum coil performance.

Electrode assembly for a lithium ion battery, process for the production of such electrode assembly, and lithium ion battery comprising such electrode assemblies

NARCIS (Netherlands)

Mulder, F.M.; Wagemaker, M.

2013-01-01

The invention provides an electrode assembly for a lithium ion battery, the electrode assembly comprising a lithium storage electrode layer on a current collector, wherein the lithium storage electrode layer is a porous layer having a porosity in the range of -35 %, with pores having pore widths in

The synthesis and biological evaluation of new DNA-directed alkylating agents, phenyl N-mustard-4-anilinoquinoline conjugates containing a urea linker.

Science.gov (United States)

Marvania, Bhavin; Kakadiya, Rajesh; Christian, Wilson; Chen, Tai-Lin; Wu, Ming-Hsi; Suman, Sharda; Tala, Kiran; Lee, Te-Chang; Shah, Anamik; Su, Tsann-Long

2014-08-18

We synthesized a series of phenyl N-mustard-4-anilinoquinoline conjugates to study their antitumorigenic effects. These agents were prepared by the condensation of 4-[N,N-bis(2-chloroethyl)amino]phenyl isocyanate with 6-amino-4-methylamino or 4-anilinoquinolines. The structure-activity relationship (SAR) studies revealed that the C2-methylquinoline derivatives (18a-o) were generally more cytotoxic than the C2-phenylquinoline conjugates (23a-d) in inhibiting the cell growth of various human tumor cell lines in vitro. However, the methylamino or aniline substituents at C4 of quinoline did not influence the cytotoxic effects. The title conjugates were capable of inducing DNA cross-linking and promoting cell-cycle arrest at the G2/M phase. This study demonstrates that phenyl N-mustard-4-anilinoquinoline conjugates are generally more potent than phenyl N-mustard-4-anilinoquinazoline conjugates against the cell growth of various tumor cell-lines. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

Atmospheric analyzer, carbon monoxide monitor and toluene diisocyanate monitor

Science.gov (United States)

Shannon, A. V.

1977-01-01

The purpose of the atmospheric analyzer and the carbon monoxide and toluene diisocyanate monitors is to analyze the atmospheric volatiles and to monitor carbon monoxide and toluene diisocyanate levels in the cabin atmosphere of Skylab. The carbon monoxide monitor was used on Skylab 2, 3, and 4 to detect any carbon monoxide levels above 25 ppm. Air samples were taken once each week. The toluene diisocyanate monitor was used only on Skylab 2. The loss of a micrometeoroid shield following the launch of Skylab 1 resulted in overheating of the interior walls of the Orbital Workshop. A potential hazard existed from outgassing of an isocyanate derivative resulting from heat-decomposition of the rigid polyurethane wall insulation. The toluene diisocyanate monitor was used to detect any polymer decomposition. The atmospheric analyzer was used on Skylab 4 because of a suspected leak in the Skylab cabin. An air sample was taken at the beginning, middle, and the end of the mission.

Sustained-release microsphere formulation containing an agrochemical by polyurethane polymerization during an agitation granulation process.

Science.gov (United States)

Terada, Takatoshi; Tagami, Manabu; Ohtsubo, Toshiro; Iwao, Yasunori; Noguchi, Shuji; Itai, Shigeru

2016-07-25

In this report, a new solventless microencapsulation method by synthesizing polyurethane (PU) from polyol and isocyanate during an agglomeration process in a high-speed mixing apparatus was developed. Clothianidin (CTD), which is a neonicotinoid insecticide and highly effective against a wide variety of insect pests, was used as the model compound. The microencapsulated samples covered with PU (CTD microspheres) had a median diameter of <75μm and sustained-release properties. The CTD microspheres were analyzed by synchrotron X-ray computed tomography measurements. Multiple cores of CTD and other solid excipient were dispersed in PU. Although voids appeared in the CTD microspheres after CTD release, the spherical shape of the microspheres remained stable and no change in its framework was observed. The experimental release data were highly consistent with the Baker-Lonsdale model derived from drug release of spherical monolithic dispersions and consistent with the computed tomography measurements. Copyright © 2016 Elsevier B.V. All rights reserved.

Sulfonated graphene oxide/nafion composite membrane for vanadium redox flow battery.

Science.gov (United States)

Kim, Byung Guk; Han, Tae Hee; Cho, Chang Gi

2014-12-01

Nafion is the most frequently used as the membrane material due to its good proton conductivity, and excellent chemical and mechanical stabilities. But it is known to have poor barrier property due to its well-developed water channels. In order to overcome this drawback, graphene oxide (GO) derivatives were introduced for Nafion composite membranes. Sulfonated graphene oxide (sGO) was prepared from GO. Both sGO and GO were treated each with phenyl isocyanate and transformed into corresponding isGO and iGO in order to promote miscibility with Nafion. Then composite membranes were obtained, and the adaptability as a membrane for vanadium redox flow battery (VRFB) was investigated in terms of proton conductivity and vanadium permeability. Compared to a pristine Nafion, proton conductivities of both isGO/Nafion and iGO/Nafion membranes showed less temperature sensitivity. Both membranes also showed quite lower vanadium permeability at room temperature. Selectivity of the membrane was the highest for isGO/Nafion and the lowest for the pristine Nafion.

Studies on Synthesis of Some Novel Heterocyclic Azlactone Derivatives and Imidazolinone Derivatives and their Antimicrobial Activity

Directory of Open Access Journals (Sweden)

Rakesh N. Mistry

2005-01-01

Full Text Available p - Methyl benzoic acid on reaction with phosphorus pentachloride gives p - methyl benzoyl chloride derivative which on condensation with glycine gives p - methyl benzoyl glycine derivative. Now, this p - methyl benzoyl glycine derivative on condensation with various substituted aldehydes gives corresponding substituted 4 - [aryl methylidine] - 2 - [p - methyl phenyl] - oxazole - 5 - one derivatives [1(a-j]. Further, these derivatives [1(a-j] on condensation with 4 , 4’ - diamino diphenyl sulphone gives corresponding substituted imidazolinone - dibenzsulphone derivatives [2(a-j], on condensation with 4 , 4’ - diamino diphenyl methane gives corresponding substituted imidazolinone - dibenzmethane derivatives [3(a-j], on condensation with 4,4’- diamino benzanilide gives corresponding substituted imidazolinone - benzanilide derivatives [4(a-j] and on condensation with 2 - amino pyridine gives corresponding substituted imidazolinone - pyridine derivatives [5(a-j] respectively. Structure elucidation of synthesised compounds has been made on the basis of elemental analysis, I.R. spectral studies and 1H N.M.R. spectral studies. The antimicrobial activity of the synthesised compounds has been studied against the cultures “Staphylococcus aureus”, “Escherichia coli” and “Candela albicans”.

Gene expression profiling in mouse lung following polymeric hexamethylene diisocyanate exposure

International Nuclear Information System (INIS)

Lee, C.-T.; Ylostalo, Joni; Friedman, Mitchell; Hoyle, Gary W.

2005-01-01

Isocyanates are a common cause of occupational lung disease. Hexamethylene diisocyanate (HDI), a component of polyurethane spray paints, can induce respiratory symptoms, inflammation, lung function impairment, and isocyanate asthma. The predominant form of HDI in polyurethane paints is a nonvolatile polyisocyanate known as HDI biuret trimer (HDI-BT). Exposure of mice to aerosolized HDI-BT results in pathological effects, including pulmonary edema, lung inflammation, cellular proliferation, and fibrotic lesions, which occur with distinct time courses following exposure. To identify genes that mediate lung pathology in the distinct temporal phases after exposure, gene expression profiles in HDI-BT-exposed C57BL/6J mouse lungs were analyzed. RNase protection assay (RPA) of genes involved in apoptosis, cell survival, and inflammation revealed increased expression of IκBα, Fas, Bcl-X L , TNFα, KC, MIP-2, IL-6, and GM-CSF following HDI-BT exposure. Microarray analysis of approximately 10 000 genes was performed on lung RNA collected from mice 6, 18, and 90 h after HDI-BT exposure and from unexposed mice. Classes of genes whose expression was increased 6 h after exposure included those involved in stress responses (particularly oxidative stress and thiol redox balance), growth arrest, apoptosis, signal transduction, and inflammation. Types of genes whose expression was increased at 18 h included proteinases, anti-proteinases, cytoskeletal molecules, and inflammatory mediators. Transcripts increased at 90 h included extracellular matrix components, transcription factors, inflammatory mediators, and cell cycle regulators. This characterization of the gene expression profile in lungs exposed to HDI-BT will provide a basis for investigating injury and repair pathways that are operative during isocyanate-induced lung disease

Effect of chondrocyte-derived early extracellular matrix on chondrogenesis of placenta-derived mesenchymal stem cells.

Science.gov (United States)

Park, Yong-Beom; Seo, Sinji; Kim, Jin-A; Heo, Jin-Chul; Lim, Young-Cheol; Ha, Chul-Won

2015-06-24

The extracellular matrix (ECM) surrounding cells contains a variety of proteins that provide structural support and regulate cellular functions. Previous studies have shown that decellularized ECM isolated from tissues or cultured cells can be used to improve cell differentiation in tissue engineering applications. In this study we evaluated the effect of decellularized chondrocyte-derived ECM (CDECM) on the chondrogenesis of human placenta-derived mesenchymal stem cells (hPDMSCs) in a pellet culture system. After incubation with or without chondrocyte-derived ECM in chondrogenic medium for 1 or 3 weeks, the sizes and wet masses of the cell pellets were compared with untreated controls (hPDMSCs incubated in chondrogenic medium without chondrocyte-derived ECM). In addition, histologic analysis of the cell pellets (Safranin O and collagen type II staining) and quantitative reverse transcription-PCR analysis of chondrogenic markers (aggrecan, collagen type II, and SOX9) were carried out. Our results showed that the sizes and masses of hPDMSC pellets incubated with chondrocyte-derived ECM were significantly higher than those of untreated controls. Differentiation of hPDMSCs (both with and without chondrocyte-derived ECM) was confirmed by Safranin O and collagen type II staining. Chondrogenic marker expression and glycosaminoglycan (GAG) levels were significantly higher in hPDMSC pellets incubated with chondrocyte-derived ECM compared with untreated controls, especially in cells precultured with chondrocyte-derived ECM for 7 d. Taken together, these results demonstrate that chondrocyte-derived ECM enhances the chondrogenesis of hPDMSCs, and this effect is further increased by preculture with chondrocyte-derived ECM. This preculture method for hPDMSC chondrogenesis represents a promising approach for cartilage tissue engineering.

Stability Assessment of a System Comprising a Single Machine and Inverter with Scalable Ratings

Energy Technology Data Exchange (ETDEWEB)

Johnson, Brian B [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Lin, Yashen [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Gevorgian, Vahan [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Purba, Victor [University of Minnesota; Dhople, Sairaj [University of Minnesota

2017-09-28

From the inception of power systems, synchronous machines have acted as the foundation of large-scale electrical infrastructures and their physical properties have formed the cornerstone of system operations. However, power electronics interfaces are playing a growing role as they are the primary interface for several types of renewable energy sources and storage technologies. As the role of power electronics in systems continues to grow, it is crucial to investigate the properties of bulk power systems in low inertia settings. In this paper, we assess the properties of coupled machine-inverter systems by studying an elementary system comprised of a synchronous generator, three-phase inverter, and a load. Furthermore, the inverter model is formulated such that its power rating can be scaled continuously across power levels while preserving its closed-loop response. Accordingly, the properties of the machine-inverter system can be assessed for varying ratios of machine-to-inverter power ratings and, hence, differing levels of inertia. After linearizing the model and assessing its eigenvalues, we show that system stability is highly dependent on the interaction between the inverter current controller and machine exciter, thus uncovering a key concern with mixed machine-inverter systems and motivating the need for next-generation grid-stabilizing inverter controls.

Energy derivatives, experiences in derivative trading from the natural gas industry : back to basics

International Nuclear Information System (INIS)

Dittmer, G.; Coyle, T.

1998-01-01

Some basic facts regarding derivatives in the electric power industry were discussed based on experiences in the natural gas industry. Derivatives were described as financial instruments that have no value of their own but derive their value from other assets, such as commodities. Futures and Options are the two forms of derivatives. Electricity as a commodity was characterized, and a historical parallel was drawn between deregulation in the natural gas and electric power industry. Short term and long term factors impacting the market and market dynamics impacting derivatives were identified. The latter include: (1) volatility, (2) liquidity, (3) correlations, and (4) price discovery. In contrast to the natural gas market, the electricity market is considered as lacking liquidity and in need of moving farther along the maturity timeline. The question of natural gas/ electricity convergence was also addressed refs., tabs., figs

Conceptual evaluation of hybrid energy system comprising wind-biomass-nuclear plants for load balancing and for production of renewable synthetic transport fuels

International Nuclear Information System (INIS)

Carlsson, Johan; Purvins, Arturs; Papaioannou, Ioulia T.; Shropshire, David; Cherry, Robert S.

2014-01-01

Future energy systems will increasingly need to integrate variable renewable energy in order to reduce greenhouse gas emissions from power production. Addressing this trend the present paper studies how a hybrid energy systems comprising aggregated wind farms, a biomass processing plant, and a nuclear cogeneration plant could support high renewable energy penetration. The hybrid energy system operates so that its electrical output tends to meet demand. This is achieved mainly through altering the heat-to-power ratio of the nuclear reactor and by using excess electricity for hydrogen production through electrolysis. Hybrid energy systems with biomass treatment processes, i.e. drying, torrefaction, pyrolysis and synthetic fuel production were evaluated. It was shown that the studied hybrid energy system comprising a 1 GWe wind farm and a 347 MWe nuclear reactor could closely follow the power demand profile with a standard deviation of 34 MWe. In addition, on average 600 m"3 of bio-gasoline and 750 m"3 bio-diesel are produced daily. The reduction of greenhouse gas emissions of up to 4.4 MtCO_2eq annually compared to power generation and transport using conventional fossil fuel sources. (author)

A New Grünwald-Letnikov Derivative Derived from a Second-Order Scheme

Directory of Open Access Journals (Sweden)

B. A. Jacobs

2015-01-01

Full Text Available A novel derivation of a second-order accurate Grünwald-Letnikov-type approximation to the fractional derivative of a function is presented. This scheme is shown to be second-order accurate under certain modifications to account for poor accuracy in approximating the asymptotic behavior near the lower limit of differentiation. Some example functions are chosen and numerical results are presented to illustrate the efficacy of this new method over some other popular choices for discretizing fractional derivatives.

Structure activity relationships of quinoxalin-2-one derivatives as platelet-derived growth factor-beta receptor (PDGFbeta R) inhibitors, derived from molecular modeling.

Science.gov (United States)

Mori, Yoshikazu; Hirokawa, Takatsugu; Aoki, Katsuyuki; Satomi, Hisanori; Takeda, Shuichi; Aburada, Masaki; Miyamoto, Ken-ichi

2008-05-01

We previously reported a quinoxalin-2-one compound (Compound 1) that had inhibitory activity equivalent to existing platelet-derived growth factor-beta receptor (PDGFbeta R) inhibitors. Lead optimization of Compound 1 to increase its activity and selectivity, using structural information regarding PDGFbeta R-ligand interactions, is urgently needed. Here we present models of the PDGFbeta R kinase domain complexed with quinoxalin-2-one derivatives. The models were constructed using comparative modeling, molecular dynamics (MD) and ligand docking. In particular, conformations derived from MD, and ligand binding site information presented by alpha-spheres in the pre-docking processing, allowed us to identify optimal protein structures for docking of target ligands. By carrying out molecular modeling and MD of PDGFbeta R in its inactive state, we obtained two structural models having good Compound 1 binding potentials. In order to distinguish the optimal candidate, we evaluated the structural activity relationships (SAR) between the ligand-binding free energies and inhibitory activity values (IC50 values) for available quinoxalin-2-one derivatives. Consequently, a final model with a high SAR was identified. This model included a molecular interaction between the hydrophobic pocket behind the ATP binding site and the substitution region of the quinoxalin-2-one derivatives. These findings should prove useful in lead optimization of quinoxalin-2-one derivatives as PDGFb R inhibitors.

Synthesis and antimicrobial activities of new oxime carbamates of 3 ...

Indian Academy of Sciences (India)

Abstract. S-alkylation of 3-aryl-2-thioquinazolin-4(3H)-one (1) with chloroacetone gave 2-(propanonyl thio)-3-arylquinazol-4(3H)ones (2). Further, the treatment of compound (2) with hydroxylamine hydrochloride gave the corresponding oximes (3) which on reaction with phenyl isocyanate in THF yielded corresponding.

Sustainable Intensified Process Retrofit for the Production of MDI

DEFF Research Database (Denmark)

Babi, Deenesh Kavi; Woodley, John; Gani, Rafiqul

Process intensification (PI) is a means by which processes can be made more efficient and sustainable at different levels, the unit operations, functional and phenomena levels. Therefore PI can be used for making process improvements at the functional level for the production of an important poly...... polyurethane, methylene diphenyldi-isocyanate (MDI)....

Laboratory Tests to Determine the Chemical and Physical Characteristics of Propellant-Solvent-Fuel Oil Mixtures

Science.gov (United States)

1990-02-01

isocyanates and many heterocyclic alcohols and ketones such as furfural and camphor also possess some I solvent power for nitrocellulose. Amines...34Estimation of Solvent Power by the Dilution-Ratio Method," J. Appl. Chem. (London) 7, 332 (1957). U R.P. Teulings, "A Multivariable Study of the Adsorption of

Plastic Models Designed to Produce Large Height-to-Length Ratio Steady-State Planar and Axisymmetric (Radial) Viscous Liquid Laminar Flow Gravity Currents

Science.gov (United States)

Blanck, Harvey F.

2012-01-01

Naturally occurring gravity currents include events such as air flowing through an open front door, a volcanic eruption's pyroclastic flow down a mountainside, and the spread of the Bhopal disaster's methyl isocyanate gas. Gravity currents typically have a small height-to-distance ratio. Plastic models were designed and constructed with a…

12 CFR 403.4 - Derivative classification.

Science.gov (United States)

2010-01-01

... SAFEGUARDING OF NATIONAL SECURITY INFORMATION § 403.4 Derivative classification. (a) Use of derivative classification. (1) Unlike original classification which is an initial determination, derivative classification... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Derivative classification. 403.4 Section 403.4...

Study of the antimalarial properties of hydroxyethylamine derivatives using green fluorescent protein transformed Plasmodium berghei

Directory of Open Access Journals (Sweden)

Mariana Conceição Souza

2015-06-01

Full Text Available A rapid decrease in parasitaemia remains the major goal for new antimalarial drugs and thus, in vivo models must provide precise results concerning parasitaemia modulation. Hydroxyethylamine comprise an important group of alkanolamine compounds that exhibit pharmacological properties as proteases inhibitors that has already been proposed as a new class of antimalarial drugs. Herein, it was tested the antimalarial property of new nine different hydroxyethylamine derivatives using the green fluorescent protein (GFP-expressing Plasmodium berghei strain. By comparing flow cytometry and microscopic analysis to evaluate parasitaemia recrudescence, it was observed that flow cytometry was a more sensitive methodology. The nine hydroxyethylamine derivatives were obtained by inserting one of the following radical in the para position: H, 4Cl, 4-Br, 4-F, 4-CH3, 4-OCH3, 4-NO2, 4-NH2 and 3-Br. The antimalarial test showed that the compound that received the methyl group (4-CH3 inhibited 70% of parasite growth. Our results suggest that GFP-transfected P. berghei is a useful tool to study the recrudescence of novel antimalarial drugs through parasitaemia examination by flow cytometry. Furthermore, it was demonstrated that the insertion of a methyl group at the para position of the sulfonamide ring appears to be critical for the antimalarial activity of this class of compounds.

STEREO PHOTO HYDROFEL, A PROCESS OF MAKING SAID STEREO PHOTO HYDROGEL, POLYMERS FOR USE IN MAKING SUCH HYDROGEL AND A PHARMACEUTICAL COMPRISING SAID POLYMERS

NARCIS (Netherlands)

Hiemstra, C.; Zhong, Zhiyuan; Feijen, Jan

2008-01-01

The Invention relates to a stereo photo hydrogel formed by stereo complexed and photo cross-linked polymers, which polymers comprise at least two types of polymers having at least one hydrophilic component, at least one hydrophobic mutually stereo complexing component, and at least one of the types

Amphetamine derivative related deaths.

Science.gov (United States)

Lora-Tamayo, C; Tena, T; Rodríguez, A

1997-02-28

Amphetamine its methylendioxy (methylendioxyamphetamine methylenedioxymethylamphetamine, methylenedioxyethylamphetamine) and methoxy derivatives (p-methoxyamphetamine and p-methoxymethylamphetamine) are widely abused in Spanish society. We present here the results of a systematic study of all cases of deaths brought to the attention of the Madrid department of the Instituto Nacional de Toxicologia from 1993 to 1995 in which some of these drugs have been found in the cadaveric blood. The cases were divided into three categories: amphetamine and derivatives, amphetamines and alcohol, amphetamines and other drugs. Data on age, sex, clinical symptoms, morphological findings, circumstances of death, when known, and concentration of amphetamine derivatives, alcohol and other drugs in blood are given for each group. The information provided here may prove to be useful for the forensic interpretation of deaths which are directly or indirectly related to abuse of amphetamine derivatives.

Isotope-labelled folic acid derivatives

International Nuclear Information System (INIS)

Lewin, N.; Wong, E.T.

1976-01-01

The suggestion deals with the production of folic acid derivatives suitable as indicators or tracers for analyses of serum folates. These folic acid derivatives contain folic acid which is bound by one or both carboxyl groups to the amino nitrogen of compounds such as, e.g., tyramine, glycyl tyrosine, tyrosine, or the methyl ester of tyrosine. The derivative obtained can be substituted by a gamma emitter, e.g. the iodine isotope I 125. The radioactive derivative is used in the method for the competitive protein bonding to determine endogenic folates in the serum. (UWI) [de

Performance of small-scale aero-derivative industrial gas turbines derived from helicopter engines

Directory of Open Access Journals (Sweden)

Barinyima Nkoi

2013-12-01

Full Text Available This paper considers comparative assessment of simple and advanced cycle small-scale aero-derivative industrial gas turbines derived from helicopter engines. More particularly, investigation was made of technical performance of the small-scale aero-derivative engine cycles based on existing and projected cycles for applications in industrial power generation, combined heat and power concept, rotating equipment driving, and/or allied processes. The investigation was done by carrying out preliminary design and performance simulation of a simple cycle (baseline two-spool small-scale aero-derivative turboshaft engine model, and some advanced counterpart aero-derivative configurations. The advanced configurations consist of recuperated and intercooled/recuperated engine cycles of same nominal power rating of 1.567 MW. The baseline model was derived from the conversion of an existing helicopter engine model. In doing so, design point and off-design point performances of the engine models were established. In comparing their performances, it was observed that to a large extent, the advanced engine cycles showed superior performance in terms of thermal efficiency, and specific fuel consumption. In numerical terms, thermal efficiencies of recuperated engine cycle, and intercooled/recuperated engine cycles, over the simple cycle at DP increased by 13.5%, and 14.5% respectively, whereas specific fuel consumption of these cycles over simple cycle at DP decreased by 12.5%, and 13% respectively. This research relied on open access public literature for data.

Dutch Lung Surgery Audit: A National Audit Comprising Lung and Thoracic Surgery Patients.

Science.gov (United States)

Berge, Martijn Ten; Beck, Naomi; Heineman, David Jonathan; Damhuis, Ronald; Steup, Willem Hans; van Huijstee, Pieter Jan; Eerenberg, Jan Peter; Veen, Eelco; Maat, Alexander; Versteegh, Michel; van Brakel, Thomas; Schreurs, Wilhemina Hendrika; Wouters, Michel Wilhelmus

2018-04-21

The nationwide Dutch Lung Surgery Audit (DLSA) started in 2012 to monitor and evaluate the quality of lung surgery in the Netherlands as an improvement tool. This outline describes the establishment, structure and organization of the audit by the Dutch Society of Lung Surgeons (NVvL) and the Dutch Society of Cardiothoracic Surgeons (NVT), in collaboration with the Dutch Institute for Clinical Auditing (DICA). In addition, first four-year results are presented. The NVvL and NVT initiated a web-based registration including weekly updated online feedback for participating hospitals. Data verification by external data managers is performed on regular basis. The audit is incorporated in national quality improvement programs and participation in the DLSA is mandatory by health insurance organizations and the National Healthcare Inspectorate. Between 1 January 2012 and 31 December 2015, all hospitals performing lung surgery participated and a total of 19,557 patients were registered from which almost half comprised lung cancer patients. Nationwide the guideline adherence increased over the years and 96.5% of lung cancer patients were discussed in preoperative multidisciplinary teams. Overall postoperative complications and mortality after non-small cell lung cancer surgery were 15.5% and 2.0%, respectively. The audit provides reliable benchmarked information for caregivers and hospital management with potential to start local, regional or national improvement initiatives. Currently, the audit is further completed with data from non-surgical lung cancer patients including treatment data from pulmonary oncologists and radiation oncologists. This will ultimately provide a comprehensive overview of lung cancer treatment in The Netherlands. Copyright © 2018. Published by Elsevier Inc.

The contribution of tumour-derived exosomes to the hallmarks of cancer.

Science.gov (United States)

Meehan, Katie; Vella, Laura J

2016-01-01

Exosomes are small, biologically active extracellular vesicles and over the last decade, both stromal and tumour-derived exosomes (TDE) have been implicated in cancer onset, progression and metastases. Cancer is a complex disease that is underpinned by several "cancer hallmarks", originally described by Hanahan and Weinberg in 2000 and then revised in 2011. The hallmarks of cancer comprise six biological capabilities, along with two emerging hallmarks and two enabling characteristics that facilitate tumour growth and metastatic dissemination. Ample evidence supports a clear role for TDE in four of the original biological hallmarks (sustaining proliferative signalling, resisting cell death, inducing angiogenesis and activating invasion and metastases). A less-defined role exists for TDE in evading growth suppressors, and currently, there is no evidence to suggest a role for TDE in enabling replicative immortality. TDE are intimately involved in the newly defined hallmarks of cancer and enabling characteristics, most evidently in immune inhibition and tumour-promoting inflammation, which ultimately enable escape from immune destruction and tumour progression. Herein, we discuss the role of TDE in the context of the hallmarks and enabling characteristics of cancer as defined by Hanahan and Weinberg.

Highly derived eutherian mammals from the earliest Cretaceous of southern Britain

Directory of Open Access Journals (Sweden)

Steven C. Sweetman

2017-11-01

Full Text Available Eutherian mammals (Placentalia and all mammals phylogenetically closer to placentals than to marsupials comprise the vast majority of extant Mammalia. Among these there is a phenomenal range of forms and sizes, but the origins of crown group placentals are obscure. They lie within the generally tiny mammals of the Mesozoic, represented for the most part by isolated teeth and jaws, and there is strongly conflicting evidence from phenomic and molecular data as to the date of origin of both Eutheria and Placentalia. The oldest purported eutherians are Juramaia from the Upper Jurassic of China, and Eomaia and Acristatherium from the Lower Cretaceous, also of China. Based on dental characters and analyses of other morphological and molecular data, doubt has recently been cast on the eutherian affinities of the Chinese taxa and consequently on the date of emergence of Eutheria. Until now, the only tribosphenic mammal recorded from the earliest Cretaceous (Berriasian Purbeck Group of Britain was the stem tribosphenidan Tribactonodon. Here we document two new tribosphenic mammals from the Purbeck Group, Durlstotherium gen. nov. and Durlstodon gen. nov., showing highly derived eutherian molar characters that support the early emergence of this clade, prior to the Cretaceous.

Strain gauge sensors comprised of carbon nanotube yarn: parametric numerical analysis of their piezoresistive response

International Nuclear Information System (INIS)

Abot, Jandro L; Kiyono, César Y; Thomas, Gilles P; Silva, Emílio C N

2015-01-01

Carbon nanotube (CNT) yarns are micron-size fibers that contain thousands of intertwined CNTs in their cross sections and exhibit piezoresistance characteristics that can be tapped for sensing purposes. Sensor yarns can be integrated into polymeric and composite materials to measure strain through resistance measurements without adding weight or altering the integrity of the host material. This paper includes the details of novel strain gauge sensor configurations comprised of CNT yarn, the numerical modeling of their piezoresistive response, and the parametric analysis schemes that determines the highest sensor sensitivity to mechanical loading. The effect of several sensor configuration parameters are discussed including the inclination and separation of the CNT yarns within the sensor, the mechanical properties of the CNT yarn, the direction and magnitude of the applied mechanical load, and the dimensions and shape of the sensor. The sensor configurations that yield the highest sensitivity are presented and discussed in terms of the mechanical and electrical properties of the CNT yarn. It is shown that strain gauge sensors consisting of CNT yarn are sensitive enough to measure strain, and could exhibit even higher gauge factors than those of metallic foil strain gauges. (paper)

A multistep continuous-flow system for rapid on-demand synthesis of receptor ligands

DEFF Research Database (Denmark)

Petersen, Trine P; Ritzén, Andreas; Ulven, Trond

2009-01-01

A multistep continuous-flow system for synthesis of receptor ligands by assembly of three variable building blocks in a single unbroken flow is described. The sequence consists of three reactions and two scavenger steps, where a Cbz-protected diamine is reacted with an isocyanate, deprotected, an......, and reacted further with an alkylating agent....

77 FR 40033 - Certain New Chemicals; Receipt and Status Information

Science.gov (United States)

2012-07-06

.../02/2012 07/30/2012 CBI (G) Coating (G) Acid anhydride, additive. polymer with aromatic isocyanate and... pigment. earth doped. P-12-0345 05/09/2012 08/06/2012 CBI (G) Coating for (G) Ultra violet- open non...) Crosslinker (S) 2-propenone, Corporation. in moisture o,o',o- cure sealant (ethylsilylidyne) formulation...

Gorenstein derived functions

DEFF Research Database (Denmark)

Holm, Henrik Granau

2004-01-01

Over any associative ring R it is standard to derive HomR(􀀀;􀀀) using projective resolutions in the rst variable, or injective resolutions in the second variable, and doing this, one obtains Extn R(􀀀;􀀀) in both cases. We examine the situation where projective...... and injective modules are replaced by Gorenstein projective and Gorenstein injective ones, respectively. Furthermore, we derive the tensor product 􀀀 R 􀀀 using Gorenstein at modules....

Exploring Covalent Allosteric Inhibition of Antigen 85C from Mycobacterium tuberculosis by Ebselen Derivatives.

Science.gov (United States)

Goins, Christopher M; Dajnowicz, Steven; Thanna, Sandeep; Sucheck, Steven J; Parks, Jerry M; Ronning, Donald R

2017-05-12

Previous studies identified ebselen as a potent in vitro and in vivo inhibitor of the Mycobacterium tuberculosis (Mtb) antigen 85 (Ag85) complex, comprising three homologous enzymes required for the biosynthesis of the mycobacterial cell wall. In this study, the Mtb Ag85C enzyme was cocrystallized with azido and adamantyl ebselen derivatives, resulting in two crystallographic structures of 2.01 and 1.30 Å resolution, respectively. Both structures displayed the anticipated covalent modification of the solvent accessible, noncatalytic Cys209 residue forming a selenenylsulfide bond. Continuous difference density for both thiol modifiers allowed for the assessment of interactions that influence ebselen binding and inhibitor orientation that were unobserved in previous Ag85C ebselen structures. The k inact /K I values for ebselen, adamantyl ebselen, and azido ebselen support the importance of observed constructive chemical interactions with Arg239 for increased in vitro efficacy toward Ag85C. To better understand the in vitro kinetic properties of these ebselen derivatives, the energetics of specific protein-inhibitor interactions and relative reaction free energies were calculated for ebselen and both derivatives using density functional theory. These studies further support the different in vitro properties of ebselen and two select ebselen derivatives from our previously published ebselen library with respect to kinetics and protein-inhibitor interactions. In both structures, the α9 helix was displaced farther from the enzyme active site than the previous Ag85C ebselen structure, resulting in the restructuring of a connecting loop and imparting a conformational change to residues believed to play a role in substrate binding specific to Ag85C. These notable structural changes directly affect protein stability, reducing the overall melting temperature by up to 14.5 °C, resulting in the unfolding of protein at physiological temperatures. Additionally, this structural

Financial Derivatives in China

Institute of Scientific and Technical Information of China (English)

无

2006-01-01

Francis Repka sees bright prospects for the future development of the financial derivatives market in China. Repka,Vice President of the Asian Bond Finance Department of Societe Generale, says the situation in France just after the birth of derivatives was very similar to the situation in China today.

A Unique Model System for Tumor Progression in GBM Comprising Two Developed Human Neuro-Epithelial Cell Lines with Differential Transforming Potential and Coexpressing Neuronal and Glial Markers

Directory of Open Access Journals (Sweden)

Anjali Shiras

2003-11-01

Full Text Available The molecular mechanisms involved in tumor progression from a low-grade astrocytoma to the most malignant glioblastoma multiforme (GBM have been hampered due to lack of suitable experimental models. We have established a model of tumor progression comprising of two cell lines derived from the same astrocytoma tumor with a set of features corresponding to low-grade glioma (as in HNGC-1 and high-grade GBM (as in HNGC-2. The HNGC-1 cell line is slowgrowing, contact-inhibited, nontumorigenic, and noninvasive, whereas HNGC-2 is a rapidly proliferating, anchorage-independent, highly tumorigenic, and invasive cell line. The proliferation of cell lines is independent of the addition of exogenous growth factors. Interestingly, the HNGC-2 cell line displays a near-haploid karyotype except for a disomy of chromosome 2. The two cell lines express the neuronal precursor and progenitor markers vimentin, nestin, MAP-2, and NFP160, as well as glial differentiation protein S100μ. The HNGC-1 cell line also expresses markers of mature neurons like Tuj1 and GFAP, an astrocytic differentiation marker, hence contributing toward a more morphologically differentiated phenotype with a propensity for neural differentiation in vitro. Additionally, overexpression of epidermal growth factor receptor and c-erbB2, and loss of fibronectin were observed only in the HNGC-2 cell line, implicating the significance of these pathways in tumor progression. This in vitro model system assumes importance in unraveling the cellular and molecular mechanisms in differentiation, transformation, and gliomagenesis.

Derivative spectrophotometry of cobalt alloys

International Nuclear Information System (INIS)

Spitsyn, P.K.

1985-01-01

The method of derivative spectrophotometry is briefly described, and derivative absorption spectra are presented for samarium, cobalt, and commercial Sm-Co alloys. It is shown that the use of derivative spectrophotometry not only improves the accuracy and selectivity of element determinations but also simplifies the analysis of alloys. Results of a statistical evaluation of the metrological characteristics of the analytical procedure described here are presented. 8 references

Artificial promoter libraries for selected organisms and promoters derived from such libraries

DEFF Research Database (Denmark)

1998-01-01

or organisms may be selected from prokaryotes and from eukaryotes; and in prokaryotes the consensus sequences to be retained most often will comprise the -35 signal (-35 to -30): TTGACA and the -10 signal (-12 to -7): TATAAT or parts of both comprising at least 3 conserved nucleotides of each, while...... in eukaryotes said consensus sequences should comprise a TATA box and at least one upstream activation sequence (UAS). Such artificial promoter libraries can be used i.a. for optimizing the expression of specific genes in various selected organisms....

Full-power test of a string of magnets comprising a half-cell of the Superconducting Super Collider

International Nuclear Information System (INIS)

Burgett, W.; Christianson, M.; Coombes, R.

1992-10-01

In this paper we describe the full-powered operation of a string of industrially-fabricated magnets comprising a half-cell of the Superconducting Super Collider (SSC). The completion of these tests marks the first successful operation of a major SSC subsystem. The five 15-m long dipole magnets in the string had an aperture of 50 mm and the single 5-m long quadrupole aperture was 40 mm. Power and cryogenic connections were made to the string through spool pieces that are prototypes for SSC operations. The string was cooled to cryogenic temperatures in early July, 1992, and power tests were performed at progressively higher currents up to the nominal SSC operating point above 6500 amperes achieved in mid-August. In this paper we report on the electrical and cryogenic performance of the string components and the quench protection system during these initial tests

Superstability for Generalized Module Left Derivations and Generalized Module Derivations on a Banach Module (I

Directory of Open Access Journals (Sweden)

Huai-Xin Cao

2009-01-01

Full Text Available We discuss the superstability of generalized module left derivations and generalized module derivations on a Banach module. Let 𝒜 be a Banach algebra and X a Banach 𝒜-module, f:X→X and g:𝒜→𝒜. The mappings Δf,g1, Δf,g2, Δf,g3, and Δf,g4 are defined and it is proved that if ∥Δf,g1(x,y,z,w∥ (resp., ∥Δf,g3(x,y,z,w,α,β∥ is dominated by φ(x,y,z,w, then f is a generalized (resp., linear module-𝒜 left derivation and g is a (resp., linear module-X left derivation. It is also shown that if ∥Δf,g2(x,y,z,w∥ (resp., ∥Δf,g4(x,y,z,w,α,β∥ is dominated by φ(x,y,z,w, then f is a generalized (resp., linear module-𝒜 derivation and g is a (resp., linear module-X derivation.

Detection of Volatile Metabolites Derived from Garlic (Allium sativum in Human Urine

Directory of Open Access Journals (Sweden)

Laura Scheffler

2016-12-01

Full Text Available The metabolism and excretion of flavor constituents of garlic, a common plant used in flavoring foods and attributed with several health benefits, in humans is not fully understood. Likewise, the physiologically active principles of garlic have not been fully clarified to date. It is possible that not only the parent compounds present in garlic but also its metabolites are responsible for the specific physiological properties of garlic, including its influence on the characteristic body odor signature of humans after garlic consumption. Accordingly, the aim of this study was to investigate potential garlic-derived metabolites in human urine. To this aim, 14 sets of urine samples were obtained from 12 volunteers, whereby each set comprised one sample that was collected prior to consumption of food-relevant concentrations of garlic, followed by five to eight subsequent samples after garlic consumption that covered a time interval of up to 26 h. The samples were analyzed chemo-analytically using gas chromatography-mass spectrometry/olfactometry (GC-MS/O, as well as sensorially by a trained human panel. The analyses revealed three different garlic-derived metabolites in urine, namely allyl methyl sulfide (AMS, allyl methyl sulfoxide (AMSO and allyl methyl sulfone (AMSO2, confirming our previous findings on human milk metabolite composition. The excretion rates of these metabolites into urine were strongly time-dependent with distinct inter-individual differences. These findings indicate that the volatile odorant fraction of garlic is heavily biotransformed in humans, opening up a window into substance circulation within the human body with potential wider ramifications in view of physiological effects of this aromatic plant that is appreciated by humans in their daily diet.

Risk and Derivative Price

OpenAIRE

Yusuke Osaki

2007-01-01

We consider an asset market traded three types of assets: the risk–free asset, the market portfolio and derivatives written on the market portfolio return. We determine a sufficient condition to guarantee that noise risk monotonically changes their derivatives. The condition is that Arrow–Pratt absolute risk aversion is decreasing and convex.

Physical and mechanical properties of parallel strand lumber made from hot pre-pressed long strand oil palm trunk waste

Science.gov (United States)

Fridiyanti, Inayah; Massijaya, M. Y.

2018-03-01

This research was focused on the utilization of oil palm trunk waste as a Parallel Strand Lumber (PSL) raw material. This research aimed to analyze the effect of adhesive types and glue spreads to the physical and mechanical properties of PSL. The adhesive types used were isocyanate and urea formaldehyde adhesives. The glue spreads used were 150 g/m2 and 300 g/m2. The research results showed that the moisture content of PSL ranged from 9.30% to 11.80%. The PSL density ranged from 0.64 to 0.78 g/cm3. The volume shrinkage ranged from 5.69 to 7.17%. Modulus of Elasticity (MOE) parallel to the grain and edge side ranged from 51.6 × 103 to 98.3 × 103 kg/cm2, and 62.1 × 103 to 99.9 × 103 kg/cm2, respectively. The Modulus of Rupture (MOR) parallel to the grain and edge side ranged from 269 to 724 kg/cm2 and 342 to 728 kg/cm2, respectively. The PSL hardness perpendicular to the grain, parallel to the grain and the edge side ranged from 135 to 300 kg/cm2, 87 to 321 kg/cm2, and 128 to 251 kg/cm2, respectively. The compressive strength ranged from 181 to 231 kg/cm2. The best adhesive and glue spreads of PSL was isocyanate with glue spread 300 g/m2. PSL made from hot pre-pressed long strand of oil palm trunk waste bonded by isocyanate fulfill JAS 1152: 2007. However, those of bonded by urea formaldehyde failed to fulfill the standard. The physical and mechanical properties of PSL made from oil palm trunk were better compared to those of solid oil palm trunk.

Biomimetic PDMS-hydroxyurethane terminated with catecholic moieties for chemical grafting on transition metal oxide-based surfaces

Science.gov (United States)

de Aguiar, Kelen R.; Rischka, Klaus; Gätjen, Linda; Noeske, Paul-Ludwig Michael; Cavalcanti, Welchy Leite; Rodrigues-Filho, Ubirajara P.

2018-01-01

The aim of this work was to synthesize a non-isocyanate poly(dimethylsiloxane) hydroxyurethane with biomimetic terminal catechol moieties, as a candidate for inorganic and metallic surface modification. Such surface modifier is capable to strongly attach onto metallic and inorganic substrates forming layers and, in addition, providing water-repellent surfaces. The non-isocyanate route is based on carbon dioxide cycloaddition into bis-epoxide, resulting in a precursor bis(cyclic carbonate)-polydimethylsiloxane (CCPDMS), thus fully replacing isocyanate in the manufacture process. A biomimetic approach was chosen with the molecular composition being inspired by terminal peptides present in adhesive proteins of mussels, like Mefp (Mytilus edulis foot protein), which bear catechol moieties and are strong adhesives even under natural and saline water. The catechol terminal groups were grafted by aminolysis reaction into a polydimethylsiloxane backbone. The product, PDMSUr-Dopamine, presented high affinity towards inhomogeneous alloy surfaces terminated by native oxide layers as demonstrated by quartz crystal microbalance (QCM-D), as well as stability against desorption by rinsing with ethanol. As revealed by QCM-D, X-ray photoelectron spectroscopy (XPS) and computational studies, the thickness and composition of the resulting nanolayers indicated an attachment of PDMSUr-Dopamine molecules to the substrate through both terminal catechol groups, with the adsorbate exposing the hydrophobic PDMS backbone. This hypothesis was investigated by classical molecular dynamic simulation (MD) of pure PDMSUr-Dopamine molecules on SiO2 surfaces. The computationally obtained PDMSUr-Dopamine assembly is in agreement with the conclusions from the experiments regarding the conformation of PDMSUr-Dopamine towards the surface. The tendency of the terminal catechol groups to approach the surface is in agreement with proposed model for the attachment PDMSUr-Dopamine. Remarkably, the versatile

Experimental and theoretical understanding of the gas phase oxidation of atmospheric amides with OH radicals: kinetics, products, and mechanisms.

Science.gov (United States)

Borduas, Nadine; da Silva, Gabriel; Murphy, Jennifer G; Abbatt, Jonathan P D

2015-05-14

Atmospheric amides have primary and secondary sources and are present in ambient air at low pptv levels. To better assess the fate of amides in the atmosphere, the room temperature (298 ± 3 K) rate coefficients of five different amides with OH radicals were determined in a 1 m(3) smog chamber using online proton-transfer-reaction mass spectrometry (PTR-MS). Formamide, the simplest amide, has a rate coefficient of (4.44 ± 0.46) × 10(-12) cm(3) molec(-1) s(-1) against OH, translating to an atmospheric lifetime of ∼1 day. N-methylformamide, N-methylacetamide and propanamide, alkyl versions of formamide, have rate coefficients of (10.1 ± 0.6) × 10(-12), (5.42 ± 0.19) × 10(-12), and (1.78 ± 0.43) × 10(-12) cm(3) molec(-1) s(-1), respectively. Acetamide was also investigated, but due to its slow oxidation kinetics, we report a range of (0.4-1.1) × 10(-12) cm(3) molec(-1) s(-1) for its rate coefficient with OH radicals. Oxidation products were monitored and quantified and their time traces were fitted using a simple kinetic box model. To further probe the mechanism, ab initio calculations are used to identify the initial radical products of the amide reactions with OH. Our results indicate that N-H abstractions are negligible in all cases, in contrast to what is predicted by structure-activity relationships. Instead, the reactions proceed via C-H abstraction from alkyl groups and from formyl C(O)-H bonds when available. The latter process leads to radicals that can readily react with O2 to form isocyanates, explaining the detection of toxic compounds such as isocyanic acid (HNCO) and methyl isocyanate (CH3NCO). These contaminants of significant interest are primary oxidation products in the photochemical oxidation of formamide and N-methylformamide, respectively.

Mechanisms with discrete nitrene species

Indian Academy of Sciences (India)

identifying a dissociation path involving singlet acyl- nitrene. However, CCSD(T) and CBS-QB3 studies62 predicted acetyl azide decomposes by methyl group migration to give methyl isocyanate and N2 with a bar- rier of 27 kcal/mol. Experimentally, photolysis of pival- oyl azide gives singlet pivaloyl nitrene,45 which adds to.

Erythrocyte folate, plasma folate and plasma homocysteine during normal pregnancy and postpartum: a longitudinal study comprising 404 danish women

DEFF Research Database (Denmark)

Milman, N; Byg, KE; Hvas, Anne-Mette

2006-01-01

OBJECTIVE: To assess folate and homocysteine status during normal pregnancy and postpartum in a longitudinal setting. METHODS: This study, performed in 1995-1996, comprised 404 healthy pregnant Danish Caucasian women residential in Copenhagen County. Women taking folic acid tablets or vitamin B12...... injections were not included. Dietary multivitamin supplements containing folic acid 100 microg or vitamin B12 1 microg, taken by 34%, were discontinued at inclusion. Participants had normal renal function. Folate status [erythrocyte (Ery-) folate, plasma (P-) folate, P-homocysteine] was measured at 18, 32...... new guidelines for folic acid supplement since 1997, only 13% of pregnant women followed the guidelines in 2003. The official recommendations for periconceptional folic acid supplement should be reconsidered and reinforced....

Uses of monoclonal antibody 8H9

Energy Technology Data Exchange (ETDEWEB)

Cheung, Nai-Kong V.

2018-04-10

This invention provides a composition comprising an effective amount of monoclonal antibody 8H9 or a derivative thereof and a suitable carrier. This invention provides a pharmaceutical composition comprising an effective amount of monoclonal antibody 8H9 or a derivative thereof and a pharmaceutically acceptable carrier. This invention also provides an antibody other than the monoclonal antibody 8H9 comprising the complementary determining regions of monoclonal antibody 8H9 or a derivative thereof, capable of binding to the same antigen as the monoclonal antibody 8H9. This invention provides a substance capable of competitively inhibiting the binding of monoclonal antibody 8H9. This invention also provides an isolated scFv of monoclonal antibody 8H9 or a derivative thereof. This invention also provides the 8H9 antigen. This invention also provides a method of inhibiting the growth of tumor cells comprising contacting said tumor cells with an appropriate amount of monoclonal antibody 8H9 or a derivative thereof.

Asymptotic aspect of derivations in Banach algebras

Directory of Open Access Journals (Sweden)

Jaiok Roh

2017-02-01

Full Text Available Abstract We prove that every approximate linear left derivation on a semisimple Banach algebra is continuous. Also, we consider linear derivations on Banach algebras and we first study the conditions for a linear derivation on a Banach algebra. Then we examine the functional inequalities related to a linear derivation and their stability. We finally take central linear derivations with radical ranges on semiprime Banach algebras and a continuous linear generalized left derivation on a semisimple Banach algebra.

Synthesis and Application of Jatropha Oil based Polyurethane as Paint Coating Material

Directory of Open Access Journals (Sweden)

Zainal Alim Mas’ud

2012-08-01

Full Text Available Recently, the use of renewable sources in the preparation of various industrial materials has been revitalized in response to environmental concerns. Natural oils are considered to be the most important genre of renewable sources. Jatropha curcas oil (JPO based polyol is an alternative material that may possibly replace petrochemical-based polyol for polyurethane coating material. Polyurethane was synthesized by reacting JPO-based polyol with isocyanate. To produce JPO-based polyol, JPO was first epoxidized to form epoxidized J. curcas oil (EJP, subsequently it was converted to polyol by the opening ring reaction with acrylic acid (AA using triethylamine (TEA as a catalyst. The JPO-based polyurethane film resulting from this study is compared with polyurethane film from commercial polyol for gloss, hardness, and adhesion quality. The result showed that the source of polyol has an influence on gloss, hardness, and adhesion of polyurethane film, but the differences with using isocyanate has less influence. Using visual observation, polyurethane film produced from L.OHV polyol, H.OHV polyol and commercial polyol have similar quality.

5 CFR 1312.7 - Derivative classification.

Science.gov (United States)

2010-01-01

..., DOWNGRADING, DECLASSIFICATION AND SAFEGUARDING OF NATIONAL SECURITY INFORMATION Classification and Declassification of National Security Information § 1312.7 Derivative classification. A derivative classification... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Derivative classification. 1312.7 Section...

Optimal economic order quantity for buyer-distributor-vendor supply chain with backlogging derived without derivatives

Science.gov (United States)

Teng, Jinn-Tsair; Cárdenas-Barrón, Leopoldo Eduardo; Lou, Kuo-Ren; Wee, Hui Ming

2013-05-01

In this article, we first complement an inappropriate mathematical error on the total cost in the previously published paper by Chung and Wee [2007, 'Optimal the Economic Lot Size of a Three-stage Supply Chain With Backlogging Derived Without Derivatives', European Journal of Operational Research, 183, 933-943] related to buyer-distributor-vendor three-stage supply chain with backlogging derived without derivatives. Then, an arithmetic-geometric inequality method is proposed not only to simplify the algebraic method of completing prefect squares, but also to complement their shortcomings. In addition, we provide a closed-form solution to integral number of deliveries for the distributor and the vendor without using complex derivatives. Furthermore, our method can solve many cases in which their method cannot, because they did not consider that a squared root of a negative number does not exist. Finally, we use some numerical examples to show that our proposed optimal solution is cheaper to operate than theirs.

Asia Pacific energy derivatives

International Nuclear Information System (INIS)

Fusaro, P.C.

1997-09-01

Asia Pacific Energy Derivatives, from FT Energy, is the first report of its kind to examine the growth of energy derivatives within Asia Pacific and their increasing importance within this region. It provides a comprehensive overview of the subject, including analysis of: deregulation as a market driver; the impact of privatisation; the future for energy risk management tools; the unique characteristics of the Asia Pacific energy market; the role of futures exchanges in Asia; existing indexes and their performance; the differences between the Asia Pacific markets and their more mature counterparts in London and New York; non-oil derivatives, project finance and cross commodity arbitrage; the thriving Pacific Rim Over the Counter (OTC) markets. (author)

DEVELOPMENT OF DERIVATIVE MARKET IN 2000-2012

Directory of Open Access Journals (Sweden)

Evgeniya V. Vasina

2014-01-01

Full Text Available At the end of XIX century futures exchange emerged, in the early 70-ies XX century - option exchange of financial derivatives. These exchanges gave a huge boost to the development of market of the operations with derivative financial instruments. In fact, in the 1970-1980-ies a new market segment was actually formed - the stock and financial derivatives. Trade in financial derivatives began in the OTC market, which accounts for most of the trade of derivatives. Today volumes of the OTC market of derivatives are several times greater than the volume of world trade and world GDP. From 2000 to 2007 derivative OTC market grew rapidly. In 2007-2008 there is a decline in trade of derivatives, but already in 2009 the world market of OTC derivatives returned to pre-crisis growth rates. Among all the instruments of the OTC market of derivatives swaps on interest rates stand out in the volumes, which even in the crisis of2007-2008 slightly, but increased. Analysis of indicators of the global OTC market of derivatives reveals the predominance of instruments on interest rates: their share in the total world market in 2012 amounted to about 77%. If we consider the structure of the OTC market of derivatives on type contracts, in 2012 most of the contracts (66% belonged to the swaps. As regards the structure of the world market of exchange derivatives, in 2012 the options had the largest share - 54 %, futures accounted for 46 %. Among all the exchange instruments on interest rates held 92%.

Development Of Derivative Market In 2000-2012

Directory of Open Access Journals (Sweden)

Evgeniya V. Vasina

2014-01-01

Full Text Available At the end of XIX century futures exchange emerged, in the early 70-ies XX century - option exchange of financial derivatives. These exchanges gave a huge boost to the development of market of the operations with derivative financial instruments. In fact, in the 1970-1980-ies a new market segment was actually formed - the stock and financial derivatives. Trade in financial derivatives began in the OTC market, which accounts for most of the trade of derivatives. Today volumes of the OTC market of derivatives are several times greater than the volume of world trade and world GDP. From 2000 to 2007 derivative OTC market grew rapidly. In 2007-2008 there is a decline in trade of derivatives, but already in 2009 the world market of OTC derivatives returned to pre-crisis growth rates. Among all the instruments of the OTC market of derivatives swaps on interest rates stand out in the volumes, which even in the crisis of2007-2008 slightly, but increased. Analysis of indicators of the global OTC market of derivatives reveals the predominance of instruments on interest rates: their share in the total world market in 2012 amounted to about 77%. If we consider the structure of the OTC market of derivatives on type contracts, in 2012 most of the contracts (66% belonged to the swaps. As regards the structure of the world market of exchange derivatives, in 2012 the options had the largest share - 54 %, futures accounted for 46 %. Among all the exchange instruments on interest rates held 92%.

The combinatorial derivation

Directory of Open Access Journals (Sweden)

Igor V. Protasov

2013-09-01

$\\Delta(A=\\{g\\in G:|gA\\cap A|=\\infty\\}$. The mapping $\\Delta:\\mathcal{P}_G\\rightarrow\\mathcal{P}_G$, $A\\mapsto\\Delta(A$, is called a combinatorial derivation and can be considered as an analogue of the topological derivation $d:\\mathcal{P}_X\\rightarrow\\mathcal{P}_X$, $A\\mapsto A^d$, where $X$ is a topological space and $A^d$ is the set of all limit points of $A$. Content: elementary properties, thin and almost thin subsets, partitions, inverse construction and $\\Delta$-trajectories,  $\\Delta$ and $d$.

22 CFR 9.6 - Derivative classification.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Derivative classification. 9.6 Section 9.6 Foreign Relations DEPARTMENT OF STATE GENERAL SECURITY INFORMATION REGULATIONS § 9.6 Derivative classification. (a) Definition. Derivative classification is the incorporating, paraphrasing, restating or...

Murine pluripotent stem cells derived scaffold-free cartilage grafts from a micro-cavitary hydrogel platform.

Science.gov (United States)

He, Pengfei; Fu, Jiayin; Wang, Dong-An

2016-04-15

By means of appropriate cell type and scaffold, tissue-engineering approaches aim to construct grafts for cartilage repair. Pluripotent stem cells especially induced pluripotent stem cells (iPSCs) are of promising cell candidates due to the pluripotent plasticity and abundant cell source. We explored three dimensional (3D) culture and chondrogenesis of murine iPSCs (miPSCs) on an alginate-based micro-cavity hydrogel (MCG) platform in pursuit of fabricating synthetic-scaffold-free cartilage grafts. Murine embryonic stem cells (mESCs) were employed in parallel as the control. Chondrogenesis was fulfilled using a consecutive protocol via mesoderm differentiation followed by chondrogenic differentiation; subsequently, miPSC and mESC-seeded constructs were further respectively cultured in chondrocyte culture (CC) medium. Alginate phase in the constructs was then removed to generate a graft only comprised of induced chondrocytic cells and cartilaginous extracellular matrix (ECMs). We found that from the mESC-seeded constructs, formation of intact grafts could be achieved in greater sizes with relatively fewer chondrocytic cells and abundant ECMs; from miPSC-seeded constructs, relatively smaller sized cartilaginous grafts could be formed by cells with chondrocytic phenotype wrapped by abundant and better assembled collagen type II. This study demonstrated successful creation of pluripotent stem cells-derived cartilage/chondroid graft from a 3D MCG interim platform. By the support of materials and methodologies established from this study, particularly given the autologous availability of iPSCs, engineered autologous cartilage engraftment may be potentially fulfilled without relying on the limited and invasive autologous chondrocytes acquisition. In this study, we explored chondrogenic differentiation of pluripotent stem cells on a 3D micro-cavitary hydrogel interim platform and creation of pluripotent stem cells-derived cartilage/chondroid graft via a consecutive

The use of dialdehyde starch derivatives in the phytoremediation of soils contaminated with heavy metals.

Science.gov (United States)

Antonkiewicz, Jacek; Para, Andrzej

2016-01-01

Products of the reaction between dialdehyde starch and Y-NH2 compounds (e.g. semicarbazide or hydrazine) are effective ligands for metal ions. The usefulness of these derivatives was tested in the experiment, both in terms of the immobilization of heavy metal ions in soil and the potential application in phytoextraction processes. The experimental model comprised maize and the ions of such metals as: Zn(II), Pb(II), Cu(II), Cd(II), and Ni(II). The amount of maize yield, as well as heavy metal content and uptake by the aboveground parts and roots of maize, were studied during a three-year pot experiment. The results of the study indicate the significant impact of heavy metals on reduced yield and increased heavy metal content in maize. Soil-applied dialdehyde starch derivatives resulted in lower yields, particularly disemicarbazone (DASS), but in heavy metal-contaminated soils they largely limited the negative impact of these metals both on yielding and heavy metal content in plants, particularly dihydrazone (DASH). It was demonstrated that the application of dihydrazone (DASH) to a soil polluted with heavy metals boosted the uptake of Zn, Pb, Cu, and Cd from the soil, hence there is a possibility to use this compound in the phytoextraction of these metals from the soil. Decreased Ni uptake was also determined, hence the possibility of using this compound in the immobilization of this metal. The study showed that dialdehyde starch disemicarbazone was ineffective in the discussed processes.

Clearing and settlement of exchange traded derivatives

OpenAIRE

John McPartland

2009-01-01

Derivatives are a class of financial instruments that derive their value from some underlying commodity, security, index, or other asset. Futures and options are common forms of derivatives. This article explains how clearing and settlement systems for exchange traded derivatives work.

6 CFR 7.26 - Derivative classification.

Science.gov (United States)

2010-01-01

... 6 Domestic Security 1 2010-01-01 2010-01-01 false Derivative classification. 7.26 Section 7.26 Domestic Security DEPARTMENT OF HOMELAND SECURITY, OFFICE OF THE SECRETARY CLASSIFIED NATIONAL SECURITY INFORMATION Classified Information § 7.26 Derivative classification. (a) Derivative classification is defined...

Fractional derivatives. An introduction; Derivate frazionarie. Che cosa sono, a cosa servono

Energy Technology Data Exchange (ETDEWEB)

Dattoli, G. [ENEA, Div. Fisica Applicata, Centro Ricerche Frascati, Rome (Italy)

2001-07-01

In this item is presented a brief survey of fractional calculus and of the relevant applications. In the work are discussed different points of view of the operation of fractional derivative and present a unifying definition. The role played by fractional derivatives and integrals within the framework of integral transform is analyzed. [Italian] In questo articolo si traccia un profilo del cosidetto calcolo frazionario e delle relative applicazioni a problemi di matematica pura ed applicata. Si discutono varie definizioni dell'operazione di derivata frazionaria, non tutte coincidenti fra loro, e si mostra come sia possibile proporre una definizione univoca che inglobi tutte le altre. Si analizza infine il ruolo giocato dalle derivate e dagli integrali frazionari e, piu' in generale, quello degli operatori differenziali ad esponente frazionario, nell'ambito della teoria delle rappresentazioni integrali.

45 CFR 601.5 - Derivative classification.

Science.gov (United States)

2010-10-01

... CLASSIFICATION AND DECLASSIFICATION OF NATIONAL SECURITY INFORMATION § 601.5 Derivative classification. Distinct... 45 Public Welfare 3 2010-10-01 2010-10-01 false Derivative classification. 601.5 Section 601.5... classification guide, need not possess original classification authority. (a) If a person who applies derivative...

Modeling drag reduction and meniscus stability of superhydrophobic surfaces comprised of random roughness

Science.gov (United States)

Samaha, Mohamed A.; Tafreshi, Hooman Vahedi; Gad-el-Hak, Mohamed

2011-01-01

Previous studies dedicated to modeling drag reduction and stability of the air-water interface on superhydrophobic surfaces were conducted for microfabricated coatings produced by placing hydrophobic microposts/microridges arranged on a flat surface in aligned or staggered configurations. In this paper, we model the performance of superhydrophobic surfaces comprised of randomly distributed roughness (e.g., particles or microposts) that resembles natural superhydrophobic surfaces, or those produced via random deposition of hydrophobic particles. Such fabrication method is far less expensive than microfabrication, making the technology more practical for large submerged bodies such as submarines and ships. The present numerical simulations are aimed at improving our understanding of the drag reduction effect and the stability of the air-water interface in terms of the microstructure parameters. For comparison and validation, we have also simulated the flow over superhydrophobic surfaces made up of aligned or staggered microposts for channel flows as well as streamwise or spanwise ridges configurations for pipe flows. The present results are compared with theoretical and experimental studies reported in the literature. In particular, our simulation results are compared with work of Sbragaglia and Prosperetti, and good agreement has been observed for gas fractions up to about 0.9. The numerical simulations indicate that the random distribution of surface roughness has a favorable effect on drag reduction, as long as the gas fraction is kept the same. This effect peaks at about 30% as the gas fraction increases to 0.98. The stability of the meniscus, however, is strongly influenced by the average spacing between the roughness peaks, which needs to be carefully examined before a surface can be recommended for fabrication. It was found that at a given maximum allowable pressure, surfaces with random post distribution produce less drag reduction than those made up of

40 CFR 721.1820 - Bisphenol derivative.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Bisphenol derivative. 721.1820 Section... Substances § 721.1820 Bisphenol derivative. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as bisphenol derivative (PMN No. P-92-509) is...

12 CFR 563.172 - Financial derivatives.

Science.gov (United States)

2010-01-01

... underlying assets, indices, or reference rates. The most common types of financial derivatives are futures, forward commitments, options, and swaps. A mortgage derivative security, such as a collateralized mortgage... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Financial derivatives. 563.172 Section 563.172...

Hydrodeoxygenation of lignin-derived phenolic compounds to hydrocarbons over Ni/SiO2-ZrO2 catalysts.

Science.gov (United States)

Zhang, Xinghua; Zhang, Qi; Wang, Tiejun; Ma, Longlong; Yu, Yuxiao; Chen, Lungang

2013-04-01

Inexpensive non-sulfided Ni-based catalysts were evaluated for hydrodeoxygenation (HDO) using guaiacol as model compound. SiO2-ZrO2 (SZ), a complex oxide synthesized by precipitation method with different ratio of Si/Zr, was impregnated with Ni(NO3)2·6H2O and calcined at 500°C. Conversion rates and product distribution for guaiacol HDO at 200-340°C were determined. Guaiacol conversion reached the maximum at 300°C in the presence of Ni/SZ-3. When HDO reaction was carried out with real lignin-derived phenolic compounds under the optimal conditions determined for guaiacol, the total yield of hydrocarbons was 62.81%. These hydrocarbons were comprised of cyclohexane, alkyl-substituted cyclohexane and alkyl-substituted benzene. They have high octane number, would be the most desirable components for fungible liquid transportation fuel. Copyright © 2013 Elsevier Ltd. All rights reserved.

Development trends of the international derivatives market

OpenAIRE

Motorniuk, U.; Terebukh, M.; Kharchuk, V.

2016-01-01

The factors forming international derivatives market trends are researched in this article. The history of the formation of the global derivatives market was analyzed, in particular, events which have led to the growth of the derivatives market. Global derivatives market has revealed major changes in its trends and witnessed the gradual transformation of its structure, observed in recent years. Global derivatives market has revealed major changes in its trends and witnessed the gradual transf...

Do measures matter? Comparing surface-density-derived and census-tract-derived measures of racial residential segregation

Directory of Open Access Journals (Sweden)

Waller Lance A

2010-06-01

Full Text Available Abstract Background Racial residential segregation is hypothesized to affect population health by systematically patterning health-relevant exposures and opportunities according to individuals' race or income. Growing interest into the association between residential segregation and health disparities demands more rigorous appraisal of commonly used measures of segregation. Most current studies rely on census tracts as approximations of the local residential environment when calculating segregation indices of either neighborhoods or metropolitan areas. Because census tracts are arbitrary in size and shape, reliance on this geographic scale limits understanding of place-health associations. More flexible, explicitly spatial derivations of traditional segregation indices have been proposed but have not been compared with tract-derived measures in the context of health disparities studies common to social epidemiology, health demography, or medical geography. We compared segregation measured with tract-derived as well as GIS surface-density-derived indices. Measures were compared by region and population size, and segregation measures were linked to birth record to estimate the difference in association between segregation and very preterm birth. Separate analyses focus on metropolitan segregation and on neighborhood segregation. Results Across 231 metropolitan areas, tract-derived and surface-density-derived segregation measures are highly correlated. However overall correlation obscures important differences by region and metropolitan size. In general the discrepancy between measure types is greatest for small metropolitan areas, declining with increasing population size. Discrepancies in measures are greatest in the South, and smallest in Western metropolitan areas. Choice of segregation index changed the magnitude of the measured association between segregation and very preterm birth. For example among black women, the risk ratio for very

32 CFR 2400.16 - Derivative classification markings.

Science.gov (United States)

2010-07-01

... SECURITY PROGRAM Derivative Classification § 2400.16 Derivative classification markings. (a) Documents... 32 National Defense 6 2010-07-01 2010-07-01 false Derivative classification markings. 2400.16..., as described in § 2400.12 of this part, the information may not be used as a basis for derivative...

Push-outs of derivations

Indian Academy of Sciences (India)

extension as a limit of operators b ↦→ D(ba) − b.D(a), a ∈ A in an appropriate operator topology, the main point in the proof being to show that the limit map is in fact a derivation. In this paper we make clear which part of this approach is analytic and which algebraic by presenting an algebraic scheme that gives derivations ...

MODERN TRENDS OF DEVELOPMENT OF INTERNATIONAL DERIVATIVES MARKET

Directory of Open Access Journals (Sweden)

V. Shelydko

2014-09-01

Full Text Available Article is devoted to analysis of structure and peculiarities of development of the international derivatives market. The history of formation of the international derivatives market is investigated. The nature, functions and advantages of use of derivatives, and also their role in the modern international securities market are defined. Classification of financial derivatives is considered. Product lines of financial derivatives are analyzed. The regional structure of the international derivatives market and dynamics of its development are investigated. The comparative characteristic of volumes and structure of exchange and over-the-counter segments of international derivatives market are carried out. Dynamics and structure of international markets of interest-bearing derivatives and currency derivatives are analyzed. The fundamental trends of development of the modern international derivatives market are defined.

Synthesis, Characterization and Antimicrobial Evaluation of some Thiazole-Derived Carbamates, Semicarbazones, Amides and Carboxamide

International Nuclear Information System (INIS)

Balawi, N.A.A.; ALShaikh, M.A.A.; Alafeefy, A.M.; Khan, K.M.

2016-01-01

This study comprises the synthesis and characterization of twenty thiazole-derived carbamates (3a-e), N-substituted amides (8a-h) and carboxamide (10) from 2-aminothiazoles (1a, b) via nucleophilic substitution reactions with activated carbonyl compounds including, chloroformates (2a-d), acid chlorides (7a-e) and glutaric anhydride (9), respectively. Sequential hydrazinolysis of carbamate (3e) and condensation with a variety of aldehydes and ketones (5a d) afforded the corresponding semicarbazones (6a-d). Some selected synthesized compounds were subjected to in vitro antimicrobial evaluation against common pathogens including, Gram+ve bacteria Bacillus subtilis (NRRL B-543) and Staphylococcus aureus, Gram-ve bacteria Escherichia coli (NRRLB-21), yeasts-Candida albicans (NRRLY-477) and Saccharomyces cercvisiae (NRRL Y-567) and fungs Asperigillus niger (NRRL 599). Screening results revealed that most of the tested compounds possess good antimicrobial activity compared to standard drugs. The highest inhibitory effects against Gram-ve Escherichia coli, Gram+ve Staphylococcus aureus, yeast Candida albicans and fungus Aspergillus niger was displayed by amide (8g) bearing the thiophene moiety. (author)

Derivation of site-specific selenium criteria for a Kentucky stream receiving fly ash effluent

International Nuclear Information System (INIS)

Reash, R.J.; Van Hassel, J.H.

1993-01-01

Blaine Creek, a fifth-order tributary to the Big Sandy River in eastern Kentucky, receives fly ash effluent from Kentucky Power Company's Big Sandy Plant fly ash pond near the creek's mouth. Long-term biosurvey/physicochemical data and speciation studies were used to derive proposed site-specific selenium water quality criteria. Biosurvey results from 1982--1990 were consistent in showing no adverse effects of fly ash discharge, even during low flow conditions when the effluent comprised 75% of creek flow. Five macroinvertebrate parameters (taxa richness, total abundance, EPT taxa, number caddisflies and chironomids) were significantly correlated with % effluent, indicating enhanced communities at high instream waste concentrations. Several fish metrics similarly showed greater enhancement at high % effluent conditions. Selenium speciation studies indicated that selenite (Se 4+ ) represented 100% of total selenium in the effluent. Total selenium concentrations were low at fully mixed downstream reaches. US EPA's Recalculation Procedure was used to calculate site-specific selenium criteria based on Se 4+ toxicity data for resident species. These criteria are higher than statewide criteria which are based on selenium, effects at waterbodies having low turnover rates

INTEGRATION OF IMAGE-DERIVED AND POS-DERIVED FEATURES FOR IMAGE BLUR DETECTION

Directory of Open Access Journals (Sweden)

T.-A. Teo

2016-06-01

Full Text Available The image quality plays an important role for Unmanned Aerial Vehicle (UAV’s applications. The small fixed wings UAV is suffering from the image blur due to the crosswind and the turbulence. Position and Orientation System (POS, which provides the position and orientation information, is installed onto an UAV to enable acquisition of UAV trajectory. It can be used to calculate the positional and angular velocities when the camera shutter is open. This study proposes a POS-assisted method to detect the blur image. The major steps include feature extraction, blur image detection and verification. In feature extraction, this study extracts different features from images and POS. The image-derived features include mean and standard deviation of image gradient. For POS-derived features, we modify the traditional degree-of-linear-blur (blinear method to degree-of-motion-blur (bmotion based on the collinear condition equations and POS parameters. Besides, POS parameters such as positional and angular velocities are also adopted as POS-derived features. In blur detection, this study uses Support Vector Machines (SVM classifier and extracted features (i.e. image information, POS data, blinear and bmotion to separate blur and sharp UAV images. The experiment utilizes SenseFly eBee UAV system. The number of image is 129. In blur image detection, we use the proposed degree-of-motion-blur and other image features to classify the blur image and sharp images. The classification result shows that the overall accuracy using image features is only 56%. The integration of image-derived and POS-derived features have improved the overall accuracy from 56% to 76% in blur detection. Besides, this study indicates that the performance of the proposed degree-of-motion-blur is better than the traditional degree-of-linear-blur.

Angiogenic Gene Signature Derived from Subtype Specific Cell Models Segregate Proneural and Mesenchymal Glioblastoma

Directory of Open Access Journals (Sweden)

Aman Sharma

2017-07-01

Full Text Available Intertumoral molecular heterogeneity in glioblastoma identifies four major subtypes based on expression of molecular markers. Among them, the two clinically interrelated subtypes, proneural and mesenchymal, are the most aggressive with proneural liable for conversion to mesenchymal upon therapy. Using two patient-derived novel primary cell culture models (MTA10 and KW10, we developed a minimal but unique four-gene signature comprising genes vascular endothelial growth factor A (VEGF-A, vascular endothelial growth factor B (VEGF-B and angiopoietin 1 (ANG1, angiopoietin 2 (ANG2 that effectively segregated the proneural (MTA10 and mesenchymal (KW10 glioblastoma subtypes. The cell culture preclassified as mesenchymal showed elevated expression of genes VEGF-A, VEGF-B and ANG1, ANG2 as compared to the other cell culture model that mimicked the proneural subtype. The differentially expressed genes in these two cell culture models were confirmed by us using TCGA and Verhaak databases and we refer to it as a minimal multigene signature (MMS. We validated this MMS on human glioblastoma tissue sections with the use of immunohistochemistry on preclassified (YKL-40 high or mesenchymal glioblastoma and OLIG2 high or proneural glioblastoma tumor samples (n = 30. MMS segregated mesenchymal and proneural subtypes with 83% efficiency using a simple histopathology scoring approach (p = 0.008 for ANG2 and p = 0.01 for ANG1. Furthermore, MMS expression negatively correlated with patient survival. Importantly, MMS staining demonstrated spatiotemporal heterogeneity within each subclass, adding further complexity to subtype identification in glioblastoma. In conclusion, we report a novel and simple sequencing-independent histopathology-based biomarker signature comprising genes VEGF-A, VEGF-B and ANG1, ANG2 for subtyping of proneural and mesenchymal glioblastoma.

Risk management, derivatives and shariah compliance

Science.gov (United States)

Bacha, Obiyathulla Ismath

2013-04-01

Despite the impressive growth of Islamic Banking and Finance (IBF), a number of weaknesses remain. The most important of this is perhaps the lack of shariah compliant risk management tools. While the risk sharing philosophy of Islamic Finance requires the acceptance of risk to justify returns, the shariah also requires adherents to avoid unnecessary risk-maysir. The requirement to avoid maysir is in essence a call for the prudent management of risk. Contemporary risk management revolves around financial engineering, the building blocks of which are financial derivatives. Despite the proven efficacy of derivatives in the management of risk in the conventional space, shariah scholars appear to be suspicious and uneasy with their use in IBF. Some have imposed outright prohibition of their use. This paper re-examines the issue of contemporary derivative instruments and shariah compliance. The shariah compatibility of derivatives is shown in a number of ways. First, by way of qualitative evaluation of whether derivatives can be made to comply with the key prohibitions of the sharia. Second, by way of comparing the payoff profiles of derivatives with risk sharing finance and Bai Salam contracts. Finally, the equivalence between shariah compliant derivatives like the IPRS and Islamic FX Currency Forwards with conventional ones is presented.

Repetitive elements may comprise over two-thirds of the human genome.

Directory of Open Access Journals (Sweden)

A P Jason de Koning

2011-12-01

Full Text Available Transposable elements (TEs are conventionally identified in eukaryotic genomes by alignment to consensus element sequences. Using this approach, about half of the human genome has been previously identified as TEs and low-complexity repeats. We recently developed a highly sensitive alternative de novo strategy, P-clouds, that instead searches for clusters of high-abundance oligonucleotides that are related in sequence space (oligo "clouds". We show here that P-clouds predicts >840 Mbp of additional repetitive sequences in the human genome, thus suggesting that 66%-69% of the human genome is repetitive or repeat-derived. To investigate this remarkable difference, we conducted detailed analyses of the ability of both P-clouds and a commonly used conventional approach, RepeatMasker (RM, to detect different sized fragments of the highly abundant human Alu and MIR SINEs. RM can have surprisingly low sensitivity for even moderately long fragments, in contrast to P-clouds, which has good sensitivity down to small fragment sizes (∼25 bp. Although short fragments have a high intrinsic probability of being false positives, we performed a probabilistic annotation that reflects this fact. We further developed "element-specific" P-clouds (ESPs to identify novel Alu and MIR SINE elements, and using it we identified ∼100 Mb of previously unannotated human elements. ESP estimates of new MIR sequences are in good agreement with RM-based predictions of the amount that RM missed. These results highlight the need for combined, probabilistic genome annotation approaches and suggest that the human genome consists of substantially more repetitive sequence than previously believed.

Effects of lactoferrin derived peptides on simulants of biological warfare agents.

Science.gov (United States)

Sijbrandij, Tjitske; Ligtenberg, Antoon J; Nazmi, Kamran; Veerman, Enno C I; Bolscher, Jan G M; Bikker, Floris J

2017-01-01

Lactoferrin (LF) is an important immune protein in neutrophils and secretory fluids of mammals. Bovine LF (bLF) harbours two antimicrobial stretches, lactoferricin and lactoferampin, situated in close proximity in the N1 domain. To mimic these antimicrobial domain parts a chimeric peptide (LFchimera) has been constructed comprising parts of both stretches (LFcin17-30 and LFampin265-284). To investigate the potency of this construct to combat a set of Gram positive and Gram negative bacteria which are regarded as simulants for biological warfare agents, the effect on bacterial killing, membrane permeability and membrane polarity were determined in comparison to the constituent peptides and the native bLF. Furthermore we aimed to increase the antimicrobial potency of the bLF derived peptides by cationic amino acid substitutions. Overall, the bactericidal activity of the peptides could be related to membrane disturbing effects, i.e. membrane permeabilization and depolarization. Those effects were most prominent for the LFchimera. Arginine residues were found to be crucial for displaying antimicrobial activity, as lysine to arginine substitutions resulted in an increased antimicrobial activity, affecting mostly LFampin265-284 whereas arginine to lysine substitutions resulted in a decreased bactericidal activity, predominantly in case of LFcin17-30.

A microbially derived tyrosine-sulfated peptide mimics a plant peptide hormone.

Science.gov (United States)

Pruitt, Rory N; Joe, Anna; Zhang, Weiguo; Feng, Wei; Stewart, Valley; Schwessinger, Benjamin; Dinneny, José R; Ronald, Pamela C

2017-07-01

The biotrophic pathogen Xanthomonas oryzae pv. oryzae (Xoo) produces a sulfated peptide named RaxX, which shares similarity to peptides in the PSY (plant peptide containing sulfated tyrosine) family. We hypothesize that RaxX mimics the growth-stimulating activity of PSY peptides. Root length was measured in Arabidopsis and rice treated with synthetic RaxX peptides. We also used comparative genomic analyses and reactive oxygen species burst assays to evaluate the activity of RaxX and PSY peptides. Here we found that a synthetic sulfated RaxX derivative comprising 13 residues (RaxX13-sY), highly conserved between RaxX and PSY, induces root growth in Arabidopsis and rice in a manner similar to that triggered by PSY. We identified residues that are required for activation of immunity mediated by the rice XA21 receptor but that are not essential for root growth induced by PSY. Finally, we showed that a Xanthomonas strain lacking raxX is impaired in virulence. These findings suggest that RaxX serves as a molecular mimic of PSY peptides to facilitate Xoo infection and that XA21 has evolved the ability to recognize and respond specifically to the microbial form of the peptide. © 2017 UT-Battelle LLC. New Phytologist © 2017 New Phytologist Trust.

Saccharification of sunflower stalks using lignocellulases from a fungal consortium comprising Pholiota adiposa and Armillaria gemina.

Science.gov (United States)

Ramachandran, Priyadharshini; Kim, Tae-Su; Dhiman, Saurabh Sudha; Li, Jinglin; Park, Ji-Hyun; Choi, Joon-Ho; Kim, Jae Young; Kim, Dongwook; Lee, Jung-Kul

2015-09-01

Lignocellulases from Armillaria gemina and Pholiota adiposa are efficient in hydrolyzing aspen and poplar biomass, respectively. In the present study, lignocellulosic enzymes obtained from a fungal consortium comprising P. adiposa and A. gemina were used for the saccharification of sunflower stalks. Sunflower stalks were thermochemically pretreated using 2 % NaOH at 50 °C for 24 h. The saccharification process parameters including substrate concentration, enzyme loading, pH, and temperature were optimized using response surface methodology to improve the saccharification yield. The highest enzymatic hydrolysis (84.3 %) was obtained using the following conditions: enzyme loading 10 FPU/g-substrate, substrate 5.5 %, temperature 50 °C, and pH 4.5. The hydrolysis yield obtained using the enzymes from the fungal consortium was equivalent to that obtained using a mixture of commercial enzymes Celluclast and Novozyme β-glucosidase. Addition of up to 500 ppm of heavy metal ions (As, Cu, Fe, Mn, Ni, Pb, and Zn) during saccharification did not significantly affect the saccharification yield. Thus, the biomass grown for phytoremediation of heavy metals can be used for the production of reducing sugars followed by ethanol fermentation.

Formation and coupling of band gaps in a locally resonant elastic system comprising a string with attached resonators

International Nuclear Information System (INIS)

Xiao Yong; Mace, Brian R.; Wen Jihong; Wen Xisen

2011-01-01

A uniform string with periodically attached spring-mass resonators represents a simple locally resonant continuous elastic system whose band gap mechanisms are basic to more general and complicated problems. In this Letter, analytical models with explicit formulations are provided to understand the band gap mechanisms of such a system. Some interesting phenomena are demonstrated and discussed, such as asymmetric/symmetric attenuation behavior within a resonance gap, and the realization of a super-wide gap due to exact coupling between Bragg and resonance gaps. In addition, some approximate formulas for the evaluation of low frequency resonance gaps are derived using an approach different from existing investigations. - Research highlights: → We examine band gaps in a special one-dimensional locally resonant system. → Bragg and resonance gaps co-exist. → Explicit formulas for locating band edges are derived. → Exact physical models are used to clarify the band gap formation mechanisms. → Coupling between Bragg and resonance gaps leads to a super-wide gap.

Development of Derivatives Reporting

OpenAIRE

Pejčochová, Kristina

2012-01-01

This thesis aims to summarise the theoretical principles, concepts and considerations pertaining to accounting for and reporting of derivatives and to describe and analyse the development of major accounting standards dealing with related issues. Sections 1 and 2 provide a basic overview of derivative instruments'categorisation, mechanics, valuation and uses. Section 3 studies the principles that ensure the provision of useful financial information, with specific focus on financial instrument...

Quantum derivatives and the Schroedinger equation

International Nuclear Information System (INIS)

Ben Adda, Faycal; Cresson, Jacky

2004-01-01

We define a scale derivative for non-differentiable functions. It is constructed via quantum derivatives which take into account non-differentiability and the existence of a minimal resolution for mean representation. This justify heuristic computations made by Nottale in scale-relativity. In particular, the Schroedinger equation is derived via the scale-relativity principle and Newton's fundamental equation of dynamics

32 CFR 2400.14 - Use of derivative classification.

Science.gov (United States)

2010-07-01

... SECURITY PROGRAM Derivative Classification § 2400.14 Use of derivative classification. (a) Derivative... 32 National Defense 6 2010-07-01 2010-07-01 false Use of derivative classification. 2400.14... person who applies derivative classification markings believes that the paraphrasing, restating, or...

A gas sensor comprising two back-to-back connected Au/TiO2 Schottky diodes

Science.gov (United States)

Dehghani, Niloofar; Yousefiazari, Ehsan

2018-04-01

A miniature, but sturdy, gas sensor capable of operation at temperatures as high as 600 °C is presented. The device comprises two back-to-back connected gold/rutile Schottky diodes, which are fabricated on the opposite bases of a self-standing 100 μm-thick pellet of polycrystalline rutile. The rutile layer is formed by the direct oxidation of titanium metal in air at 900 °C, and the Au/rutile diodes are formed by the diffusion bonding of the gold wire segments to the pellet bases. The current versus voltage diagrams and gas sensing properties of the Au/rutile/Au structured device are recorded at different voltage sweeping frequencies and operating temperatures. The interesting features of these diagrams are explained based on an equivalent circuit of the device, which considers Schottky-type contacts at both bases and memristive conduction for the rutile in between. The device current is controlled by the leakage current of the reverse biased diode, which depends on the concentration of the oxygen vacancy at the Au/rutile interface and, hence, on the composition of the surrounding atmosphere. The device current increases 15 times in response to the presence of 1000 ppm of ethanol vapor in air. Consisting only of bulk gold and bulk rutile, the device is resilient to harsh environments and elevated temperatures; a suitable gas sensor for in-exhaust installation.

Novel Metabolic Attributes of the Genus Cyanothece, Comprising a Group of Unicellular Nitrogen-Fixing Cyanobacteria

Science.gov (United States)

Bandyopadhyay, Anindita; Elvitigala, Thanura; Welsh, Eric; Stöckel, Jana; Liberton, Michelle; Min, Hongtao; Sherman, Louis A.; Pakrasi, Himadri B.

2011-01-01

ABSTRACT The genus Cyanothece comprises unicellular cyanobacteria that are morphologically diverse and ecologically versatile. Studies over the last decade have established members of this genus to be important components of the marine ecosystem, contributing significantly to the nitrogen and carbon cycle. System-level studies of Cyanothece sp. ATCC 51142, a prototypic member of this group, revealed many interesting metabolic attributes. To identify the metabolic traits that define this class of cyanobacteria, five additional Cyanothece strains were sequenced to completion. The presence of a large, contiguous nitrogenase gene cluster and the ability to carry out aerobic nitrogen fixation distinguish Cyanothece as a genus of unicellular, aerobic nitrogen-fixing cyanobacteria. Cyanothece cells can create an anoxic intracellular environment at night, allowing oxygen-sensitive processes to take place in these oxygenic organisms. Large carbohydrate reserves accumulate in the cells during the day, ensuring sufficient energy for the processes that require the anoxic phase of the cells. Our study indicates that this genus maintains a plastic genome, incorporating new metabolic capabilities while simultaneously retaining archaic metabolic traits, a unique combination which provides the flexibility to adapt to various ecological and environmental conditions. Rearrangement of the nitrogenase cluster in Cyanothece sp. strain 7425 and the concomitant loss of its aerobic nitrogen-fixing ability suggest that a similar mechanism might have been at play in cyanobacterial strains that eventually lost their nitrogen-fixing ability. PMID:21972240

Generalized Fractional Derivative Anisotropic Viscoelastic Characterization

Directory of Open Access Journals (Sweden)

Harry H. Hilton

2012-01-01

Full Text Available Isotropic linear and nonlinear fractional derivative constitutive relations are formulated and examined in terms of many parameter generalized Kelvin models and are analytically extended to cover general anisotropic homogeneous or non-homogeneous as well as functionally graded viscoelastic material behavior. Equivalent integral constitutive relations, which are computationally more powerful, are derived from fractional differential ones and the associated anisotropic temperature-moisture-degree-of-cure shift functions and reduced times are established. Approximate Fourier transform inversions for fractional derivative relations are formulated and their accuracy is evaluated. The efficacy of integer and fractional derivative constitutive relations is compared and the preferential use of either characterization in analyzing isotropic and anisotropic real materials must be examined on a case-by-case basis. Approximate protocols for curve fitting analytical fractional derivative results to experimental data are formulated and evaluated.

Method of making Tl-Sr-Ca-Cu-oxide superconductors comprising heating at elevated pressures in a sealed container

International Nuclear Information System (INIS)

Lechtev, W.L.; Osofsky, M.S.; Skelton, E.F.; Toth, L.E.

1992-01-01

This patent describes a method of forming a Tl-Sr-Ca-Cu-oxide high T c superconductor. It comprises forming a reaction mixture of the oxides of Sr, Cu, Ca, and Tl in stoichiometric proportions to make a Tl-Sr-Ca-Cu-oxide high T c superconducting compound; compressing the reaction mixture into a hard body; placing the hard body into a container for containing thallium vapor; evacuating and sealing the hard body in the container; heating the hard body and the container at a temperature of about 800 degrees C to about 950 degrees C and under pressure of at least about 30,000 psi until the container metal around the hard body and the oxides of Tl, Sr, Ca, and Cu react to form a superconducting compound; and cooling the superconducting compound to room temperature and returning the superconducting compound to atmospheric pressure

Proliferating cells in psoriatic dermis are comprised primarily of T cells, endothelial cells, and factor XIIIa+ perivascular dendritic cells

International Nuclear Information System (INIS)

Morganroth, G.S.; Chan, L.S.; Weinstein, G.D.; Voorhees, J.J.; Cooper, K.D.

1991-01-01

Determination of the cell types proliferating in the dermis of patients with psoriasis should identify those cells experiencing activation or responding to growth factors in the psoriatic dermal milieu. Toward that end, sections of formalin-fixed biopsies obtained from 3H-deoxyuridine (3H-dU)-injected skin of eight psoriatic patients were immunostained, followed by autoradiography. Proliferating dermal cells exhibit silver grains from tritium emissions. The identity of the proliferating cells could then be determined by simultaneous visualization with antibodies specific for various cell types. UCHL1+ (CD45RO+) T cells (recall antigen-reactive helper T-cell subset) constituted 36.6 +/- 3.1% (mean +/- SEM, n = 6) of the proliferating dermal cells in involved skin, whereas Leu 18+ (CD45RA+) T cells (recall antigen naive T-cell subsets) comprised only 8.7 +/- 1.5% (n = 6). The Factor XIIIa+ dermal perivascular dendritic cell subset (24.9 +/- 1.5% of proliferating dermal cells, n = 6) and Factor VIII+ endothelial cells represented the two other major proliferating populations in lesional psoriatic dermis. Differentiated tissue macrophages, identified by phase microscopy as melanophages or by immunostaining with antibodies to Leu M1 (CD15) or myeloid histiocyte antigen, comprised less than 5% of the proliferating population in either skin type. In addition to calculating the relative proportions of these cells to each other as percent, we also determined the density of cells, in cells/mm2 of tissue. The density of proliferating cells within these populations was increased in involved versus uninvolved skin: UCHL1+, 9.0 +/- 1.7 cells/mm2 versus 1.8 +/- 0.6 cells/mm2, p less than 0.01; Factor XIIIa+, 6.0 +/- 0.7 cells/mm2 versus 1.5 +/- 0.5 cells/mm2, p less than 0.01; Factor VIII+, 5.5 +/- 1.4 cells/mm2 versus 0.0 cells/mm2, p less than 0.05

Essays on Derivatives Pricing

DEFF Research Database (Denmark)

Kokholm, Thomas

. With the existence of a liquid market for derivatives with variance as underlying, such as VIX options, VIX futures and a well-developed over-the-counter market for options on variance swaps, it is important to consider models that are able to fit these markets while consistently pricing vanilla options...... financial models, and most importantly, to be aware of their limitations. Following that belief, this thesis consists of three independent and self-contained papers, all dealing with topics in derivatives pricing. The first paper considers the pricing of traffic light options, which are appropriate...... the market for multivariate credit instruments, we take a step back and focus on single-name default modeling and introduce two new model classes for modeling of the default time of a company. Finally, in the third paper we propose a consistent pricing model for index and volatility derivatives...

Effects of a novel β–lapachone derivative on Trypanosoma cruzi: Parasite death involving apoptosis, autophagy and necrosis

Directory of Open Access Journals (Sweden)

Danielle Oliveira dos Anjos

2016-12-01

Full Text Available Natural products comprise valuable sources for new antiparasitic drugs. Here we tested the effects of a novel β–lapachone derivative on Trypanosoma cruzi parasite survival and proliferation and used microscopy and cytometry techniques to approach the mechanism(s underlying parasite death. The selectivity index determination indicate that the compound trypanocidal activity was over ten-fold more cytotoxic to epimastigotes than to macrophages or splenocytes. Scanning electron microscopy analysis revealed that the R72 β–lapachone derivative affected the T. cruzi morphology and surface topography. General plasma membrane waving and blebbing particularly on the cytostome region were observed in the R72-treated parasites. Transmission electron microscopy observations confirmed the surface damage at the cytostome opening vicinity. We also observed ultrastructural evidence of the autophagic mechanism termed macroautophagy. Some of the autophagosomes involved large portions of the parasite cytoplasm and their fusion/confluence may lead to necrotic parasite death. The remarkably enhanced frequency of autophagy triggering was confirmed by quantitating monodansylcadaverine labeling. Some cells displayed evidence of chromatin pycnosis and nuclear fragmentation were detected. This latter phenomenon was also indicated by DAPI staining of R72-treated cells. The apoptotis induction was suggested to take place in circa one-third of the parasites assessed by annexin V labeling measured by flow cytometry. TUNEL staining corroborated the apoptosis induction. Propidium iodide labeling indicate that at least 10% of the R72-treated parasites suffered necrosis within 24 h. The present data indicate that the β–lapachone derivative R72 selectively triggers T. cruzi cell death, involving both apoptosis and autophagy-induced necrosis.

Financial Derivatives (Based on Two Supports Evaluation

Directory of Open Access Journals (Sweden)

Tiberiu Socaciu

2016-07-01

Full Text Available In this paper we build a PDE like Black-Scholes equation in hypothesis of a financial derivative that is dependent on two supports (usual is dependent only on one support, like amoption based on gold, when national currency has a great float.Keywords: Financial derivatives, derivatives evaluation, derivatives based on two supports, extended Itō like lemma.

Animal-derived natural products of Sowa Rigpa medicine: Their pharmacopoeial description, current utilization and zoological identification.

Science.gov (United States)

Yeshi, Karma; Morisco, Paolo; Wangchuk, Phurpa

2017-07-31

The Bhutanese Sowa Rigpa medicine (BSM) uses animal parts in the preparation of numerous polyingredient traditional remedies. Our study reports the taxonomical identification of medicinal animals and the description of traditional uses in English medical terminologies. To taxonomically identify the medicinal animals and their derived natural products used as a zootherapeutic agents in BSM. First, the traditional textbooks were reviewed to generate a list of animal products described as ingredients. Second, animal parts that are currently used in Bhutan were identified. Third, the ethnopharmacological uses of each animal ingredients were translated into English medical terminologies by consulting Traditional Physicians, clinical assistants, pharmacognosists, and pharmacists in Bhutan. Fourth, the animal parts were taxonomically identified and their Latin names were confirmed by crosschecking them with online animal databases and relevant scientific literature. The study found 73 natural products belonging to 29 categories derived from 45 medicinal animals (36 vertebrates and 9 invertebrates), comprising of 9 taxonomic categories and 30 zoological families. Out of 116 formulations currently produced, 87 of them contain one or more extracts and products obtained from 13 medicinal animals to treat more than 124 traditionally classified illnesses. Only five animal ingredients were found available in Bhutan and rest of the animal parts are being imported from India. Out of 73 natural products described in the traditional textbooks, only 13 of them (some omitted and few substituted by plants) are currently included in 87 formulations of BSM. Copyright © 2017 Elsevier Ireland Ltd. All rights reserved.

On higher derivative gravity

International Nuclear Information System (INIS)

Accioly, A.J.

1987-01-01

A possible classical route conducting towards a general relativity theory with higher-derivatives starting, in a sense, from first principles, is analysed. A completely causal vacuum solution with the symmetries of the Goedel universe is obtained in the framework of this higher-derivative gravity. This very peculiar and rare result is the first known vcuum solution of the fourth-order gravity theory that is not a solution of the corresponding Einstein's equations.(Author) [pt

Brain derived neurotrophic factor

DEFF Research Database (Denmark)

Mitchelmore, Cathy; Gede, Lene

2014-01-01

Brain Derived Neurotrophic Factor (BDNF) is a neurotrophin with important functions in neuronal development and neuroplasticity. Accumulating evidence suggests that alterations in BDNF expression levels underlie a variety of psychiatric and neurological disorders. Indeed, BDNF therapies are curre......Brain Derived Neurotrophic Factor (BDNF) is a neurotrophin with important functions in neuronal development and neuroplasticity. Accumulating evidence suggests that alterations in BDNF expression levels underlie a variety of psychiatric and neurological disorders. Indeed, BDNF therapies...

Derivation and characterization of a pig embryonic stem cell-derived exocrine pancreatic cell line

Science.gov (United States)

The establishment and initial characterization of a pig embryonic stem cell-derived pancreatic cell line, PICM-31, and a colony-cloned derivative cell line, PICM-31A, is described. The cell lines were propagated for several months at split ratios of 1:3 or 1:5 at each passage on STO feeder cells af...

Quantile driven identification of structural derivatives

OpenAIRE

Andrew Chesher

2001-01-01

Conditions are derived under which there is local nonparametric identification of derivatives of structural equations in nonlinear triangular simultaneous equations systems. The attack on this problem is via conditional quantile functions and exploits local quantile independence conditions. The identification conditions include local analogues of the order and rank conditions familiar in the analysis of linear simultaneous equations models. The objects whose identification is sought are deriv...

Drug Nanoparticle Formulation Using Ascorbic Acid Derivatives

Directory of Open Access Journals (Sweden)

Kunikazu Moribe

2011-01-01

Full Text Available Drug nanoparticle formulation using ascorbic acid derivatives and its therapeutic uses have recently been introduced. Hydrophilic ascorbic acid derivatives such as ascorbyl glycoside have been used not only as antioxidants but also as food and pharmaceutical excipients. In addition to drug solubilization, drug nanoparticle formation was observed using ascorbyl glycoside. Hydrophobic ascorbic acid derivatives such as ascorbyl mono- and di-n-alkyl fatty acid derivatives are used either as drugs or carrier components. Ascorbyl n-alkyl fatty acid derivatives have been formulated as antioxidants or anticancer drugs for nanoparticle formulations such as micelles, microemulsions, and liposomes. ASC-P vesicles called aspasomes are submicron-sized particles that can encapsulate hydrophilic drugs. Several transdermal and injectable formulations of ascorbyl n-alkyl fatty acid derivatives were used, including ascorbyl palmitate.

Platelet-rich plasma and its derivatives as promising bioactive materials for regenerative medicine: basic principles and concepts underlying recent advances.

Science.gov (United States)

Kawase, Tomoyuki

2015-05-01

Over the past decade, platelet-rich plasma (PRP), a platelet-concentrated plasma fraction, has been widely investigated and applied to regenerative medicine. The clinical utility of PRP is supported by evidence that PRP contains high concentrations of platelet-related growth factors and normal concentrations of plasma-derived fibrinogen, both of which contribute synergistically to the regenerative process. Additionally, its superior cost-efficacy versus conventional therapies is attractive to many clinicians. However, current disadvantages of PRP include a relatively complicated preparation procedure and variable operator-dependent efficacy. An additional disadvantage is the use of bovine thrombin, an animal-derived biological, as a coagulant. Many of these disadvantages are overcome by recent advances in preparation procedures and devices; for example, Joseph Choukroun simplified the platelet-rich fibrin preparation procedure and improved handling efficiency without the aid of animal-derived factors. With advancements in cell processing technology, there has been a general shift in cell therapy from autologous to allogeneic treatment; however, autologous PRP therapy will not easily be replaced by allogeneic treatment in the near future. Therefore, to provide more predictable regenerative therapy outcomes using autologous PRP, further investigations should address developing a standardized procedure for PRP preparation to augment its efficacy and potency, independent of donor variability. We would then propose that operators and clinicians prepare PRP according to the standardized protocol and to carefully evaluate the clinical scenario (i.e., recipient factors comprising skeletal defects) to determine which factor(s) should be added to PRP preparations. This careful approach will lead to improved clinical outcomes for patients.

Robustness of solvent/detergent treatment of plasma derivatives: a data collection from Plasma Protein Therapeutics Association member companies.

Science.gov (United States)

Dichtelmüller, Herbert O; Biesert, Lothar; Fabbrizzi, Fabrizio; Gajardo, Rodrigo; Gröner, Albrecht; von Hoegen, Ilka; Jorquera, Juan I; Kempf, Christoph; Kreil, Thomas R; Pifat, Dominique; Osheroff, Wendy; Poelsler, Gerhard

2009-09-01

Solvent/detergent (S/D) treatment is an established virus inactivation technology that has been applied in the manufacture of medicinal products derived from human plasma for more than 20 years. Data on the inactivation of enveloped viruses by S/D treatment collected from seven Plasma Protein Therapeutics Association member companies demonstrate the robustness, reliability, and efficacy of this virus inactivation method. The results from 308 studies reflecting production conditions as well as technical variables significantly beyond the product release specification were evaluated for virus inactivation, comprising different combinations of solvent and detergent (tri(n-butyl) phosphate [TNBP]/Tween 80, TNBP/Triton X-100, TNBP/Na-cholate) and different products (Factor [F]VIII, F IX, and intravenous and intramuscular immunoglobulins). Neither product class, process temperature, protein concentration, nor pH value has a significant impact on virus inactivation. A variable that did appear to be critical was the concentration of solvent and detergent. The data presented here demonstrate the robustness of virus inactivation by S/D treatment for a broad spectrum of enveloped test viruses and process variables. Our data substantiate the fact that no transmission of viruses such as human immunodeficiency virus, hepatitis B virus, hepatitis C virus, or of other enveloped viruses was reported for licensed plasma derivatives since the introduction of S/D treatment.

Wood-Derived Materials for Green Electronics, Biological Devices, and Energy Applications.

Science.gov (United States)

Zhu, Hongli; Luo, Wei; Ciesielski, Peter N; Fang, Zhiqiang; Zhu, J Y; Henriksson, Gunnar; Himmel, Michael E; Hu, Liangbing

2016-08-24

With the arising of global climate change and resource shortage, in recent years, increased attention has been paid to environmentally friendly materials. Trees are sustainable and renewable materials, which give us shelter and oxygen and remove carbon dioxide from the atmosphere. Trees are a primary resource that human society depends upon every day, for example, homes, heating, furniture, and aircraft. Wood from trees gives us paper, cardboard, and medical supplies, thus impacting our homes, school, work, and play. All of the above-mentioned applications have been well developed over the past thousands of years. However, trees and wood have much more to offer us as advanced materials, impacting emerging high-tech fields, such as bioengineering, flexible electronics, and clean energy. Wood naturally has a hierarchical structure, composed of well-oriented microfibers and tracheids for water, ion, and oxygen transportation during metabolism. At higher magnification, the walls of fiber cells have an interesting morphology-a distinctly mesoporous structure. Moreover, the walls of fiber cells are composed of thousands of fibers (or macrofibrils) oriented in a similar angle. Nanofibrils and nanocrystals can be further liberated from macrofibrils by mechanical, chemical, and enzymatic methods. The obtained nanocellulose has unique optical, mechanical, and barrier properties and is an excellent candidate for chemical modification and reconfiguration. Wood is naturally a composite material, comprised of cellulose, hemicellulose, and lignin. Wood is sustainable, earth abundant, strong, biodegradable, biocompatible, and chemically accessible for modification; more importantly, multiscale natural fibers from wood have unique optical properties applicable to different kinds of optoelectronics and photonic devices. Today, the materials derived from wood are ready to be explored for applications in new technology areas, such as electronics, biomedical devices, and energy. The

Wood-Derived Materials for Green Electronics, Biological Devices, and Energy Applications

Energy Technology Data Exchange (ETDEWEB)

Zhu, Hongli; Luo, Wei; Ciesielski, Peter N.; Fang, Zhiqiang; Zhu, J. Y.; Henriksson, Gunnar; Himmel, Michael E.; Hu, Liangbing

2016-08-24

With the arising of global climate change and resource shortage, in recent years, increased attention has been paid to environmentally friendly materials. Trees are sustainable and renewable materials, which give us shelter and oxygen and remove carbon dioxide from the atmosphere. Trees are a primary resource that human society depends upon every day, for example, homes, heating, furniture, and aircraft. Wood from trees gives us paper, cardboard, and medical supplies, thus impacting our homes, school, work, and play. All of the above-mentioned applications have been well developed over the past thousands of years. However, trees and wood have much more to offer us as advanced materials, impacting emerging high-tech fields, such as bioengineering, flexible electronics, and clean energy. Wood naturally has a hierarchical structure, composed of well-oriented microfibers and tracheids for water, ion, and oxygen transportation during metabolism. At higher magnification, the walls of fiber cells have an interesting morphology--a distinctly mesoporous structure. Moreover, the walls of fiber cells are composed of thousands of fibers (or macrofibrils) oriented in a similar angle. Nanofibrils and nanocrystals can be further liberated from macrofibrils by mechanical, chemical, and enzymatic methods. The obtained nanocellulose has unique optical, mechanical, and barrier properties and is an excellent candidate for chemical modification and reconfiguration. Wood is naturally a composite material, comprised of cellulose, hemicellulose, and lignin. Wood is sustainable, earth abundant, strong, biodegradable, biocompatible, and chemically accessible for modification; more importantly, multiscale natural fibers from wood have unique optical properties applicable to different kinds of optoelectronics and photonic devices. Today, the materials derived from wood are ready to be explored for applications in new technology areas, such as electronics, biomedical devices, and energy. The

The millimeter wave spectrum of methyl cyanate: a laboratory study and astronomical search in space ⋆,⋆⋆

Science.gov (United States)

Kolesniková, L.; Alonso, J. L.; Bermúdez, C.; Alonso, E. R.; Tercero, B.; Cernicharo, J.; Guillemin, J.-C.

2016-01-01

Aims The recent discovery of methyl isocyanate (CH3NCO) in Sgr B2(N) and Orion KL makes methyl cyanate (CH3OCN) a potential molecule in the interstellar medium. The aim of this work is to fulfill the first requirement for its unequivocal identification in space, i.e. the availability of transition frequencies with high accuracy. Methods The room-temperature rotational spectrum of methyl cyanate was recorded in the millimeter wave domain from 130 to 350 GHz. All rotational transitions revealed A-E splitting owing to methyl internal rotation and were globally analyzed using the ERHAM program. Results The data set for the ground torsional state of methyl cyanate exceeds 700 transitions within J″ = 10 – 35 and Ka″=0−13 and newly derived spectroscopic constants reproduce the spectrum close to the experimental uncertainty. Spectral features of methyl cyanate were then searched for in Orion KL, Sgr B2(N), B1-b, and TMC-1 molecular clouds. Upper limits to the column density of methyl cyanate are provided. PMID:27721514

Central Clearing of OTC Derivatives

DEFF Research Database (Denmark)

Cont, Rama; Kokholm, Thomas

2014-01-01

netting agreements. When a CCP exists for interest rate derivatives, adding a CCP for credit derivatives is shown to decrease overall exposures. These findings are shown to be robust to the statistical assumptions of the model as well as the choice of risk measure used to quantify exposures....

Toxic Industrial Chemicals: A Future Weapons of Mass Destruction Threat

Science.gov (United States)

2002-05-31

1937 by Dr. Gerhard Schrader, a chemist conducting insecticide research with organophosphates (Stockholm International Peace Research Institute 1971...International Peace Research Institute 1971 and 1973). Phosgene oxime is known as “ nettle gas,” so named because of its property of intensely irritating...as a WMD. Common TICs Effects of CW Agents Organophosphate Insecticide Nerve Dimethyl Sulfate Blister Methyl Isocyanate Blood Anhydrous Ammonia

Regeneration of ammonia borane from polyborazylene

Science.gov (United States)

Sutton, Andrew; Gordon, John C; Ott, Kevin C; Burrell, Anthony K

2013-02-05

Method of producing ammonia borane, comprising providing a reagent comprising a dehydrogenated material in a suitable solvent; and combining the reagent with a reducing agent comprising hydrazine, a hydrazine derivative, or combinations thereof, in a reaction which produces a mixture comprising ammonia borane.

Higher-derivative generalization of conformal mechanics

Science.gov (United States)

Baranovsky, Oleg

2017-08-01

Higher-derivative analogs of multidimensional conformal particle and many-body conformal mechanics are constructed. Their Newton-Hooke counterparts are derived by applying appropriate coordinate transformations.

Aggregator: a machine learning approach to identifying MEDLINE articles that derive from the same underlying clinical trial.

Science.gov (United States)

Shao, Weixiang; Adams, Clive E; Cohen, Aaron M; Davis, John M; McDonagh, Marian S; Thakurta, Sujata; Yu, Philip S; Smalheiser, Neil R

2015-03-01

It is important to identify separate publications that report outcomes from the same underlying clinical trial, in order to avoid over-counting these as independent pieces of evidence. We created positive and negative training sets (comprised of pairs of articles reporting on the same condition and intervention) that were, or were not, linked to the same clinicaltrials.gov trial registry number. Features were extracted from MEDLINE and PubMed metadata; pairwise similarity scores were modeled using logistic regression. Article pairs from the same trial were identified with high accuracy (F1 score=0.843). We also created a clustering tool, Aggregator, that takes as input a PubMed user query for RCTs on a given topic, and returns article clusters predicted to arise from the same clinical trial. Although painstaking examination of full-text may be needed to be conclusive, metadata are surprisingly accurate in predicting when two articles derive from the same underlying clinical trial. Copyright © 2014 Elsevier Inc. All rights reserved.

Studies on activated carbon derived from neem (azadirachta indica) bio-waste, and its application as supercapacitor electrode

Science.gov (United States)

Ahmed, Sultan; Parvaz, M.; Johari, Rahul; Rafat, M.

2018-04-01

The present study reports the preparation of quasi solid-state supercapacitor employing activated carbon (AC) electrodes and gel polymer electrolyte (GPE). AC was derived from Neem leaves by means of chemical activation using zinc chloride as activating agent. GPE was prepared using solution-cast technique and comprises of LiClO 4 salt, dispersed in EC:PC (1:1 vol.) and entrapped in PVdF-HFP solution. Extensive physical and electrochemical characterization of synthesized AC and GPE was done. AC was characterized using the techniques of SEM, TEM, XRD, Raman spectroscopy, TGA and BET tests while GPE was characterized by electrochemical stability window (ESW) and conductivity test. The fabricated supercapacitor cell was tested using standard electrochemical characterization techniques. It was found that the fabricated cell offers high values of specific capacitance (74.41 F g‑1), specific energy (10.33 Wh kg‑1) and specific power (4.66 kW kg‑1). These results demonstrate the suitability of prepared AC as promising electrode material for supercapacitor applications.

Survey on the Use of Derivatives in Indonesia

Directory of Open Access Journals (Sweden)

I Wayan Nuka Lantara

2010-09-01

Full Text Available This paper provides survey evidence on the use of derivatives among firms listed on the Indonesian Stock Exchange. The finding shows that the participation rate in the use of derivatives is 28.8 percent, much lower than those found in developed countries. For the derivatives non-users, insignificant risk exposure is reported as the most important rationale for not using derivatives. Consumer goods industry constitutes the largest proportion of firms using derivatives. The majority of respondents utilize derivatives to hedge against financial risks rather than to speculate. Foreign currency risk and interest rate risk are the most important types of risks faced with by respondents. Using the Chi-square and the Fisher’s exact tests, the result corroborates the size effect hypothesis, where the use of derivatives is more popular among large firms than small firms. A SURVEY ON THE USE OF DERIVATIVES IN INDONESIA Keywords: derivatives; hedging; risk management

Structural and biophysical characterization of an antimicrobial peptide chimera comprised of lactoferricin and lactoferrampin.

Science.gov (United States)

Haney, Evan F; Nazmi, Kamran; Bolscher, Jan G M; Vogel, Hans J

2012-03-01

Lactoferricin and lactoferrampin are two antimicrobial peptides found in the N-terminal lobe of bovine lactoferrin with broad spectrum antimicrobial activity against a range of Gram-positive and Gram-negative bacteria as well as Candida albicans. A heterodimer comprised of lactoferrampin joined to a fragment of lactoferricin was recently reported in which these two peptides were joined at their C-termini through the two amino groups of a single Lys residue (Bolscher et al., 2009, Biochimie 91(1):123-132). This hybrid peptide, termed LFchimera, has significantly higher antimicrobial activity compared to the individual peptides or an equimolar mixture of the two. In this work, the underlying mechanism behind the increased antibacterial activity of LFchimera was investigated. Differential scanning calorimetry studies demonstrated that all the peptides influenced the thermotropic phase behaviour of anionic phospholipid suspensions. Calcein leakage and vesicle fusion experiments with anionic liposomes revealed that LFchimera had enhanced membrane perturbing properties compared to the individual peptides. Peptide structures were evaluated using circular dichroism and NMR spectroscopy to gain insight into the structural features of LFchimera that contribute to the increased antimicrobial activity. The NMR solution structure, determined in a miscible co-solvent mixture of chloroform, methanol and water, revealed that the Lys linkage increased the helical content in LFchimera compared to the individual peptides, but it did not fix the relative orientations of lactoferricin and lactoferrampin with respect to each other. The structure of LFchimera provides insight into the conformation of this peptide in a membranous environment and improves our understanding of its antimicrobial mechanism of action. Copyright © 2011 Elsevier B.V. All rights reserved.

Perturbative reduction of derivative order in EFT

Science.gov (United States)

Glavan, Dražen

2018-02-01

Higher derivative corrections are ubiquitous in effective field theories, which seemingly introduces new degrees of freedom at successive orders. This is actually an artefact of the implicit local derivative expansion defining effective field theories. We argue that higher derivative corrections that introduce additional degrees of freedom should be removed and their effects captured either by lower derivative corrections, or special combinations of higher derivative corrections not propagating extra degrees of freedom. Three methods adapted for this task are examined and field redefinitions are found to be most appropriate. First order higher derivative corrections in a scalar tensor theory are removed by field redefinition and it is found that their effects are captured by a subset of Horndeski theories. A case is made for restricting the effective field theory expansions in principle to only terms not introducing additional degrees of freedom.

Preparation of 7-substituted ginkgolide derivatives

DEFF Research Database (Denmark)

Vogensen, Stine Byskov; Strømgaard, Kristian; Shindou, Hideo

2003-01-01

alpha-fluoro ginkgolide B was equipotent to ginkgolide B underlining the critical importance of the 7-position of ginkgolides for PAF receptor activity. Herein we describe the synthesis of a series of ginkgolide B derivatives with modifications at the 7-position and the pharmacological evaluation...... of these derivatives as assayed by cloned PAF receptors. In two cases nucleophilic attack on a 7beta-O-triflate ginkgolide B did not lead to the expected products, but gave rise to two unprecedented ginkgolide derivatives, one with a novel rearranged skeleton. Furthermore, standard reduction of 7alpha-azido ginkgolide......-chloro ginkgolide B, the most potent nonaromatic ginkgolide derivative described to date with a K(i) value of 110 nM....

Nanocomposite multilayer capacitors comprising BaTiO3@TiO2 and poly(vinylidene fluoride-hexafluoropropylene for dielectric-based energy storage

Directory of Open Access Journals (Sweden)

Mojtaba Rahimabady

2014-04-01

Full Text Available Multilayer dielectric capacitors were fabricated from nanocomposite precursor comprised of BaTiO3@TiO2 core–shell nanosized particles and poly(vinylidene fluoride–hexafluoropropylene (P(VDF–HFP polymer matrix (20 vol%. The multilayer capacitors showed very high discharge speed and high discharged energy density of around 2.5 J/cm3 at its breakdown field (~ 166 MV/m. The energy density of the nanocomposite multilayer capacitors was substantially higher than the energy density of commercially used power capacitors. Low cost, flexible structure, high discharge rate and energy density suggest that the nanocomposite multilayer capacitors are promising for energy storage applications in many power devices and systems.

Inadequate vitamin D status: does it contribute to the disorders comprising syndrome 'X'?

Science.gov (United States)

Boucher, B J

1998-04-01

Environmental factors are important in the aetiology of glucose intolerance, type II diabetes and IHD. The lack of vitamin D, which is necessary for adequate insulin secretion, relates demographically to increased risk of myocardial infarction. These disorders are connected, degenerative vascular disease increasing with glucose intolerance and diabetes and, with its risk factors, comprising syndrome 'X'. Evidence is presented suggesting that vitamin D deficiency may be an avoidable risk factor for syndrome 'X', adding another preventative measure to current recommendations which are aimed at reducing the worldwide epidemic of these disorders. Experimentally, vitamin D deficiency progressively reduces insulin secretion; glucose intolerance follows and becomes irreversible. Relationships between vitamin D status, glucose tolerance and 30 min insulin secretion during oral glucose tolerance tests are reported in British Asians; insulin secretion, but not glycaemia, improving with short-term supplementation. Studies showing reduction in blood pressure and in risk of heart attack and diabetes with exercise (usually outdoor), rarely consider the role of vitamin D status. Glycaemia and insulin secretion in elderly European men, however, relate to vitamin D status, independent of season or physical activity. Prolonged supplementation can improve glycaemia. Hypertension improves with vitamin D treatment with or without initial deficiency. Vitamin D status and climate are reviewed as risk factors for myocardial infarction; the risk reducing with altitude despite increasing cold. Glycaemia and fibrinogenaemia improve with insulin secretion increases in summer. Variation in vitamin D requirements could arise from genetic differences in vitamin D processing since bone density can vary with vitamin D-receptor genotype. Vitamin D receptors are present in islet beta cells and we report insulin secretion in healthy Asians differing profoundly with the Apa I genotype, being