Geochemistry and meaning of the geotectonic position of plutonic rocks from Chapada region, Goias, Brazil

International Nuclear Information System (INIS)

Kuyumjian, R.M.

1989-01-01

In common with other orogenic belts, in which the presence of both, granitic and small basic-ultrabasic intrusions are characteristics of medium-high pressure metamorphic terranes, the geological and geochemical evidences indicate a close relationship between the granitoid, gabbroic and pyroxenitic plutons and the orogenic metabasaltic rocks from the Chapada volcano-sedimentary sequence. The granitoids are tonalitic and, on discriminant diagrams, they plot in the volcanic arc and pre-collisional fields. They display geochemical characteristics similar to the Jamaican oceanic arc-related granities. They show low LIL and HSF element abundances, low (Ta, Nb)/(K, La, etc) ratios and very low concentrations of Th, Hf, K and Y, when compared to patterns of calkaline, alkali-calcic and alkaline-peralkaline granitoids of magmatic arcs. These chemical features are characteristic of immature island arcs mantle-derived intrusives. The Chapada olivine gabbro has a chondrite-normalized spidergram, closely resembling those of island-arc basaltic lavas, the compositions of its coexisting olivine and plagioclase been similar to those from arc-related cumulate gabbros, and therefore, it could be the plutonic equivalent of the arc volcanics in the Chapada region. It is suggested that the evolution of the granitoids and gabbro intrusives from Chapada are related to a process of subduction that occurred in central Brazil during the Brasiliano/Pan-African event. (author) [pt

Metasedimentary, granitoid, and gabbroic rocks from central Stewart Island, New Zealand

International Nuclear Information System (INIS)

Allibone, A.H.; Tulloch, A.J.

1997-01-01

A NNE-NE trending strip, 3-8 km wide, extending from the Freshwater valley across Mt Rakeahua Table Hill, and Mt Allen to the northern end or the Tin Range was mapped at a scale of 1:12,500 to locate and investigate the boundary between the Median Tectonic Zone (MTZ) and Western Province on Stewart Island. A NNE-trending fault, herein termed the Escarpment Fault, separates predominantly ductily deformed rocks on its south side from essentially undeformed rocks to the north. North of the Escarpment Fault, a small (2-3 km 2 ) pluton of alkali-feldspar granite (Freds Camp) intruded gabbroic rocks tentatively considered to be associated with gabbro/anorthosite/diorite of the Rakeahua pluton, centred on Mt Rakeahua. Both units were subsequently intruded by I-type biotite granite of the South West Arm pluton. South of the Escarpment Fault the oldest intrusions are biotite tonalite-granite orthogneisses (Ridge and Table Hill plutons) intercalated with the sillimanite-cordierite-bearing Pegasus Group metasedimentary rocks, considered to represent the Western Province. They contain titanite, allanite, and magmatic epidote-bearing assemblages, implying affinities with I-type granitoids. These older granitoids have been affected by at least three phases of ductile deformation. Immediately south of the Escarpment Fault, the Escarpment pluton (hornblende, biotite, quartz, monzonite-quartz monzodiorite) only exhibit effects of the third phase of deformation. Minor gabbroic intrusives concordant with the S 3 fabric intrude the Pegasus Group and intercalated orthogneisses. Plutons of two-mica, garnet ±cordierite granite (Blaikies and Knob) and younger biotite-titanite-magmatic epidote granite (Campsite) cut fabrics associated with the third phase of ductile deformation. Preliminary U-Pb dating indicate Devonian-Carboniferous, Jurassic, and Early Cretaceous emplacement ages for Ridge Orthogneiss, Freds Camp pluton, South West Arm pluton, and Blaikies pluton, respectively. South

Geological, petrogical and geochemical characteristics of granitoid rocks in Burma: with special reference to the associated WSn mineralization and their tectonic setting

Science.gov (United States)

Zaw, Khin

The granitoid rocks in Burma extend over a distance of 1450 km from Putao, Kachin State in the north, through Mogok, Kyaukse, Yamethin and Pyinmana in the Mandalay Division, to Tavoy and Mergui areas, Tenasserim Division, in the south. The Burmese granitoids can be subdivided into three N-S trending, major belts viz. western granitoid belt, central graniotoid belt and eastern granitoid belt. The Upper Cretaceous-Lower Eocene western belt granitoids are characterized by high-level intrusions associated with porphyry Cu(Au) related, younger volcanics; these plutonic and volcanic rocks are thought to have been emplaced as a magmatic-volcanic arc (inner magmatic-volcanic arc) above an east-dipping, but westwardly migrating, subduction zone related to the prolonged plate convergence which occurred during Upper Mesozoic and Cenozoic. The central granitoid belt is characterized by mesozonal, Mostly Upper Cretaceous to Lower Eocene plutons associated with abundant pegmalites and aplites, numerous vein-type W-Sn deposits and rare co-magmatic volcanics. The country rocks are structurally deformed, metamorphic rocks of greenschist to upper amphibolite facies ranging in age as early as Upper Precambrian to Upper Paleozoic and locally of fossiliferous, metaclastic rocks (Mid Jurassic to Lower Cretaceous). Available K/Ar radiometric data indicate significant and possibly widespread thermal disturbances in the central granitoid belt during the Tertiary (mostly Miocence). In this study, the distribution, lithological, textural and structural characteristics of the central belt granitoids are reviewed, and their mineralogical, petrological, and geochemical features are presented. A brief description of W-Sn ore veins associated with these granitoid plutons is also reported. Present geological, petrological and geochemical evidences demonstrate that the W-Sn related, central belt granitoids are mostly granodiorite and granite which are commonly transformed into granitoid gneisses

Bivergent thrust wedges surrounding oceanic island arcs: Insight from observations and sandbox models of the northeastern caribbean plate

Science.gov (United States)

ten Brink, Uri S.; Marshak, S.; Granja, Bruna J.L.

2009-01-01

At several localities around the world, thrust belts have developed on both sides of oceanic island arcs (e.g., Java-Timor, Panama, Vanuatu, and the northeastern Caribbean). In these localities, the overall vergence of the backarc thrust belt is opposite to that of the forearc thrust belt. For example, in the northeastern Caribbean, a north-verging accretionary prism lies to the north of the Eastern Greater Antilles arc (Hispaniola and Puerto Rico), whereas a south-verging thrust belt called the Muertos thrust belt lies to the south. Researchers have attributed such bivergent geometry to several processes, including: reversal of subduction polarity; subduction-driven mantle flow; stress transmission across the arc; gravitational spreading of the arc; and magmatic inflation within the arc. New observations of deformational features in the Muertos thrust belt and of fault geometries produced in sandbox kinematic models, along with examination of published studies of island arcs, lead to the conclusion that the bivergence of thrusting in island arcs can develop without reversal of subduction polarity, without subarc mantle flow, and without magmatic inflation. We suggest that the Eastern Greater Antilles arc and comparable arcs are simply crustalscale bivergent (or "doubly vergent") thrust wedges formed during unidirectional subduction. Sandbox kinematic modeling suggests, in addition, that a broad retrowedge containing an imbricate fan of thrusts develops only where the arc behaves relatively rigidly. In such cases, the arc acts as a backstop that transmits compressive stress into the backarc region. Further, modeling shows that when arcs behave as rigid blocks, the strike-slip component of oblique convergence is accommodated entirely within the prowedge and the arc-the retrowedge hosts only dip-slip faulting ("frontal thrusting"). The existence of large retrowedges and the distribution of faulting in an island arc may, therefore, be evidence that the arc is

230Th/234U activity ratio in the products from Izu-Bonin island-arc volcanoes

International Nuclear Information System (INIS)

Kurihara, Y.; Takahashi, M.; Sato, J.

2006-01-01

Magma genesis at subduction zone is generally inferred to be induced by the partial melting of the mantle wedge by the addition of fluid derived from the subducting slab. Uranium-series disequilibria in the volcanic products are a useful tracer to understand various magma processes. Young island-arc volcanic rocks showed the characteristic feature of excess 234 U over 230 Th. Observation was carried out on the radioactive disequilibrium between 234 U and 230 Th in the volcanic products from Asama volcano and Izu-Mariana island-arc volcanoes. Thorium and Uranium in the volcanic rock samples were separated by anion-exchange resin and purified by TEVA·Spec. and UTEVA·Spec. resins, respectively. Purified Th and U were electrodeposited onto a stainless steel planchet for α-ray counting. U-234 and 230 Th in volcanic rock samples were determined by isotope dilution method coupled with α-ray spectrometry. 230 Th/ 234 U activity ratio in the volcanic products from Asama volcano and Izu-Bonin island-arc volcanoes were in radioactive disequilibrium, enriched in 234 U relative to 230 Th, which is often observed for volcanic products from young island-arc volcanic products. (author)

Tomographic imaging of subducted lithosphere below northwest Pacific island arcs

Science.gov (United States)

Van Der Hilst, R.; Engdahl, R.; Spakman, W.; Nolet, G.

1991-01-01

The seismic tomography problem does not have a unique solution, and published tomographic images have been equivocal with regard to the deep structure of subducting slabs. An improved tomographic method, using a more realistic background Earth model and surf ace-reflected as well as direct seismic phases, shows that slabs beneath the Japan and Izu Bonin island arcs are deflected at the boundary between upper and lower mantle, whereas those beneath the northern Kuril and Mariana arcs sink into the lower mantle.

An extending island arc: The case of Kamchatka

Science.gov (United States)

Kozhurin, Andrey; Zelenin, Egor

2017-06-01

We report a first estimate of the extension rate of the onshore Kamchatka island arc, it central wider part. This average rate is 17 ± 3 mm/yr over mid-late Quaternary time. The extension is absorbed by slip on major normal active faults of Central Kamchatka, and graben-producing faulting in its volcanic belt. Probable extension of the underwater portion of the arc, its rate remaining unknown, may add up to the total value. The onshore extension rate, established by remote fault scarp measurements on DEMs resembles the numerical modelling estimate of Schellart et al. (2007), suggesting that the primary driving force responsible for the extension at Kamchatka is slab and trench retreat.

Eocene to Miocene back-arc basin basalts and associated island arc tholeiites from northern Sulawesi (Indonesia): Implications for the geodynamic evolution of the Celebes basin

International Nuclear Information System (INIS)

Rangin, C.; Maury, R.C.; Bellon, H.; Cotten, J.; Polve, M.; Priadi, B.; Soeria-Atmadja, R.; Joron, J.L.

1997-01-01

Eocene BABB basalts intruded by tholeiitic and calk-alkalic island arc magmatic rocks are reported from the north arm of Sulawesi (Indonesia). Age and geochemical similarities between these basalts and those drilled in the Celebes Sea indicate this North Sulawesi volcanic arc was built on the same oceanic crust. The 25 deg late Neogene clockwise rotation of the north arm of Sulawesi following its collision with fragments of Australia (Sula, Buton) is not sufficient to explain the asymmetrical magnetic anomalies in the Celebes basin. The North Sulawesi island arc could be interpreted as having progressively retreated northward on its own Celebes sea back arc basin, during an episode of Palaeogene-early Neogene tectonic erosion along the trench. (authors)

SHRIMP zircon dating of granitoids from Myanmar: constraints on the tectonic evolution of Southeast Asia

International Nuclear Information System (INIS)

Barley, M.E.; Pickard, A.L.; Zaw, K.; University of Tasmania, Hobart, TAS

1999-01-01

Full text: Situated south of the eastern syntaxis of the Himalayas, Myanmar occupies a key position in the tectonic evolution of Southeast Asia. However, there is almost no modern geochronology for this region. In this contribution we present new SHRIMP zircon dates for granitoids from the Shan Scarp (Mogok Metamorphic Belt), Taninthayi (Tenasserim) Region in the Myeik (Mergui) Archipelago and Central Valley (Western Myanmar) regions of Myanmar. The oldest ages obtained were from Jurassic granitoids, gneisses and amphibolites interlayered with marbles that were metamorphosed and deformed during the Eocene-Oligiocene and Miocene in the Mogok Metamorphic Belt. The occurrence of mid-Jurassic metamorphosed igneous rocks in the Mogok Metamorphic Belt is similar to that in the Hunza Karakoram and confirms interpretations that the southern margin of Asia became an Andean-type convergent margin at that time. Ages between 120 and 80 Ma for l-type granitoids intruding the Mogok Metamorphic Belt, Myeik Archipelago and Western Myanmar confirm that an up to 200km wide mid Cretaceous magmatic belt extended along the Eurasian margin from Tibet to Sumatra. Fractionated l-Type granitoids, that locally host Sn-W mineralisation, were emplaced in the Myeik Archipelago (and adjacent Thailand) in the latest Cretaceous to Early Eocene (80 to 50 Ma). These granitoids formed a wide convergent margin magmatic belt as the Indian plate rapidly approached Eurasia. Deformation and high-grade metamorphism occurred in the Mogok Metamorphic Belt during the Eocene-Oligiocene as the collision between India and Eurasia initiated crustal thickening prior to extrusion, or rotation, of Indochina and northward movement of Western Myanmar. Arc magmatism continued in Western Myanmar with emplacement of granitoids in the Central Valley. Deformation, extensional uplift and further granitoid magmatism occurred in the Mogok Metamorphic Belt during the Early Miocene northward movement of Western Myanmar

Fundamental structure model of island arcs and subducted plates in and around Japan

Science.gov (United States)

Iwasaki, T.; Sato, H.; Ishiyama, T.; Shinohara, M.; Hashima, A.

2015-12-01

The eastern margin of the Asian continent is a well-known subduction zone, where the Pacific (PAC) and Philippine Sea (PHS) plates are being subducted. In this region, several island arcs (Kuril, Northeast Japan, Southwest Japan, Izu-Bonin and Ryukyu arcs) meet one another to form a very complicated tectonic environment. At 2014, we started to construct fundamental structure models for island arcs and subducted plates in and around Japan. Our research is composed of 6 items of (1) topography, (2) plate geometry, (3) fault models, (4) the Moho and brittle-ductile transition zone, (5) the lithosphere-asthenosphere boundary, and (6) petrological/rheological models. Such information is basic but inevitably important in qualitative understanding not only for short-term crustal activities in the subduction zone (particularly caused by megathrust earthquakes) but also for long-term cumulative deformation of the arcs as a result of strong plate-arc/arc-arc interactions. This paper is the first presentation of our research, mainly presenting the results of items (1) and (2). The area of our modelling is 12o-54o N and 118o-164o E to cover almost the entire part of Japanese Islands together with Kuril, Ryukyu and Izu-Bonin trenches. The topography model was constructed from the 500-m mesh data provided from GSJ, JODC, GINA and Alaska University. Plate geometry models are being constructed through the two steps. In the first step, we modelled very smooth plate boundaries of the Pacific and Philippine Sea plates in our whole model area using 42,000 earthquake data from JMA, USGS and ISC. For 7,800 cross sections taken with several directions to the trench axes, 2D plate boundaries were defined by fitting to the earthquake distribution (the Wadati-Benioff zone), from which we obtained equi-depth points of the plate boundary. These equi-depth points were then approximated by spline interpolation technique to eliminate shorter wave length undulation (75-150 km), but provide a

Petrogenesis of Jurassic granitoids at the northeastern margin of the North China Craton: New geochemical and geochronological constraints on subduction of the Paleo-Pacific Plate

Science.gov (United States)

Liu, Jin; Zhang, Jian; Liu, Zhenghong; Yin, Changqing; Zhao, Chen; Peng, Youbo

2018-06-01

At the junction between the North China Craton (NCC) and the Central Asian Orogenic Belt (CAOB), northern Liaoning province, NE China, there are widespread Jurassic igneous rocks. The tectonic setting and petrogenesis of these rocks are unresolved. Zircon U-Pb dating, whole-rock geochemistry, and Hf isotopic compositions of Jurassic granitoids were investigated to constrain their ages and petrogenesis in order to understand the tectonic evolution of the Paleo-Pacific Ocean along the northeastern margin of the NCC. Geochronological data indicate that magmatism occurred between the early and late Jurassic (180-156 Ma). Despite the wide range in ages of the intrusions, Jurassic granitoids were likely derived from a similar or common source, as inferred from their geochemical and Hf isotopic characteristics. Compared to the island arc andesite-dacite-rhyolite series, the Jurassic granitoids are characterized by higher SiO2, Al2O3, and Sr contents, and lower MgO, FeOT, Y, and Yb contents, indicating that the primary magmas show typical characteristics of adakitic magmas derived from partial melting of thickened lower crust. These findings, combined with their εHf(t) values (+1.4 to +5.4) and two-stage model ages (1515-1165 Ma), indicate the primary magmas originated from partial melting of juvenile crustal material accreted during the Mesoproterozoic. They are enriched in large-ion lithophile elements (e.g., Rb, K, Th, Ba, and U) and light rare-earth elements (REE), and depleted in high-field-strength elements (e.g., Nb, Ta, Ti, and P) and heavy REE. Based on these findings and previous studies, we suggest that the Jurassic adakitic granitoids (180-156 Ma) were formed in an active continental margin and compressive tectonic setting, related to subduction of the Paleo-Pacific Plate.

Using experimental petrology to constrain genesis of wet, silicic magmas in the Tonga-Kermadec island arc

Science.gov (United States)

Brens, R.; Rushmer, T. A.; Turner, S.; Adam, J.

2012-12-01

The Tongan arc system is comprised of a pair of island chains, where the western chain is the active volcanic arc. A range of rock suites, from basaltic andesites (53-56% SiO2) to dacites (64-66% SiO2), has been recovered from Late, Tofua and Fonualei in the Tonga-Kermadec primitive island arc system. For which the question arises: What is the mechanism that allows for silicic magmas to develop in a primitive island arc system? Caufield et al. (2012) suggest that fractional crystallization of a multi magma chamber process, with varying depth, is responsible for the silicic magma generation in this arc. Models such as this one have been proposed and experimentally tested in other systems (Novarupta, Alaska) to explain the origin of these silicic rocks. Our Tongan suite of rocks has had a full geochemical analysis for majors, traces and isotopes. The lavas from Tofua and Late are Fe-rich and have low concentrations of K, Rb, Ba, Zr, REE, Pb and U. However, experimental studies are needed to complement the extensive geochemical analysis done on the Tongan arc. Former geochemical work done on the igneous rocks from both of these volcanic suites from this arc suggests that the source of these rocks extend from 1.5-5.5 km in depth (Caulfield et al., 2012). Here, we present an experimental study of the phase equilibria on a natural andesitic sample (Late 1, from Ewart et al., 1975) from the island of Late. Experiments were run using the temperature constraints between 900 to 1220oC, pressure from 5 to 25 kbars and H2O addition of mostly 5wt% (but some results were obtained at 2wt% in the rocks). In the presence of 5 wt% water, phase equilibria of these experiments show the garnet stability field at >10 kb for 900 oC and increases with increasing temperature, while plagioclase enters at lower pressures when garnet exits. Experimental results currently suggests, at lower temperatures (900-950oC), a fractional crystallization relationship due to shallow level pressures of

Bimodal volcanism in northeast Puerto Rico and the Virgin Islands (Greater Antilles Island Arc): Genetic links with Cretaceous subduction of the mid-Atlantic ridge Caribbean spur

Science.gov (United States)

Jolly, Wayne T.; Lidiak, Edward G.; Dickin, Alan P.

2008-07-01

Bimodal extrusive volcanic rocks in the northeast Greater Antilles Arc consist of two interlayered suites, including (1) a predominantly basaltic suite, dominated by island arc basalts with small proportions of andesite, and (2) a silicic suite, similar in composition to small volume intrusive veins of oceanic plagiogranite commonly recognized in oceanic crustal sequences. The basaltic suite is geochemically characterized by variable enrichment in the more incompatible elements and negative chondrite-normalized HFSE anomalies. Trace element melting and mixing models indicate the magnitude of the subducted sediment component in Antilles arc basalts is highly variable and decreases dramatically from east to west along the arc. In the Virgin Islands, the sediment component ranges between 4% during the Cenomanian-Campanian interval. The silicic suite, consisting predominantly of rhyolites, is characterized by depleted Al 2O 3 (average Virgin Islands on the east, rhyolites comprise up to 80% of Lower Albian strata (112 to 105 Ma), and about 20% in post-Albian strata (105 to 100 Ma). Farther west, in Puerto Rico, more limited proportions (Atlantic Ridge, which was located approximately midway between North and South America until Campanian times. Within this hypothetical setting the centrally positioned Virgin Islands terrain remained approximately fixed above the subducting ridge as the Antilles arc platform swept northeastward into the slot between the Americas. Accordingly, heat flow in the Virgin Islands was elevated throughout the Cretaceous, giving rise to widespread crustal melting, whereas the subducted sediment flux was limited. Conversely, toward the west in central Puerto Rico, which was consistently more remote from the subducting ridge, heat flow was relatively low and produced limited crustal melting, while the sediment flux was comparatively elevated.

Ankaramite: A New Type of High-Magnesium and High-Calcium Primitive Melt in the Magnitogorsk Island-Arc Zone (Southern Urals)

Science.gov (United States)

Pushkarev, E. V.; Ryazancev, A. V.; Gottman, I. A.; Degtyarev, K. E.; Kamenetsky, V. S.

2018-04-01

This work describes the geological position, mineral and chemical composition of high-Mg effusive ankaramites occurring as dykes and lava flows. They were found in the mélange zone of the western margin of the Magnitogorsk island arc zone in the Southern Urals. Data on the liquidus association of phenocrysts and on the composition of the matrix of effusives are given. According to the data obtained, the conclusion was drawn that the ankaramites studied can be attributed to the primary island arc melts, which were not subject to essential differentiation. This type of effusives has not been distinguished previously among island arc volcanogenic formations of the Urals. It is shown that ankaramites can be considered to be primary melts parental for dunite-clinopyroxenites-gabbro complexes of Ural-Alaskan type. The occurrence of ankaramites in the Paleozoic island arc formations of the Urals indicates the wehrlite composition of the mantle as the reason for the extremely wide development of wehrlites and clinopyroxenites in different mafic-ultramafic complexes of the Urals.

The geochemistry of marine sediments, island arc magma genesis, and crust-mantle recycling

International Nuclear Information System (INIS)

Ben Othman, D.; Paris-6 Univ., 75; White, W.M.; Cornell Univ., Ithaca, NY; Patchett, J.; Arizona Univ., Tucson

1989-01-01

To assess the role of sediment subduction and recycling in island arc magma genesis and mantle evolution, we have determined Sr, Nd, and Pb isotope ratios and the concentrations of K, Rb, Cs, Ba, Sr, U, Th, Pb and rare earth elements in 36 modern marine sediments, including Mn nodules, biogenic oozes, and pelagic and hemipelagic clays from the Pacific, Antlantic and Indian Oceans. Sr and Nd isotope ratios and the Sr/Nd concentration ratios in sediments are such that mixing between subducted sediment on the one hand and depleted mantle or subducted oceanic crust on the other can produce mixing arrays which may pass either through or outside of the oceanic basalt Sr-Nd isotope 'mantle array'. Thus whether isotope compositions of island arc volcanics (IAV) plot inside our outside of the mantle array is not a good indication of whether or not their sources contain a subducted sediment component. The presence of subducted sediment in the sources of IAV should lead to Cs/Rb and Pb/Ce ratios which are higher than those in oceanic basalts, and Ba/Rb ratios which may be either higher or lower than oceanic basalts. Simple mixing calculations suggest that as little as a percent or so sediment in island arc magma sources can account for the observed Cs/Rb, Pb/Ce, and Ba/Rb ratios in IAV. However, it does not appear that high Ba/La ratios and negative Ce anomalies in IAV are inherited from sediment in IAV magma sources. It is more likely these features reflect fractionation of alkalis and alkaline earths from rare earths during slab dehydration and metasomatism. Pb isotope ratios in sediments from the Warton Basin south of the Sunda Arc are collinear in 208 Pb/ 204 Pb- 207 Pb/ 204 Pb- 206 Bp/ 204 Pb space with volcanics from West Sunda, but not with volcanics from the East Sunda. This collinearity is consistent with the hypothesis that sediments similar to these are being subducted to the magma genesis zone of the West Sunda Arc. (orig./WB)

Temporal evolution of the Western and Central volcanism of the Aeolian Island Arc (Italy, southern Tyrhhenian Sea)

Science.gov (United States)

Leocat, E.; Gillot, P.-Y.; Peccerillo, A.

2009-04-01

The Aeolian Archipelago is a volcanic arc in the Southern Tyrrhenian Sea located on the continental margin of the Calabro-Peloritan basement. The Aeolian volcanism occurs in a very complex geodynamic setting linked to the convergence of the European and African plates. For that reason, it is strongly related to regional tectonic lineaments, such as the NW-SE trending Tindari-Letojani (TL) fault. The archipelago consists of seven main islands and several seamounts, which extend around the Marsili Basin, forming a ring-like shape, typical for an island arc. While the seamounts began their activities around 1 Ma , the emerged part is active since about 400 ka. The magmatic products of the whole arc range from typical island arc calc-alkaline (CA) and shoshonitic series, to slightly silica undersaturated potassic alkaline series that are typical of post-collisional settings. Furthermore, the TL fault, along which the Lipari and Vulcano islands are developed, separates a calc-alkaline western sector (Alicudi, Filicudi and Salina islands) from the calc-alkaline to potassic eastern system (Panarea and Stromboli islands) (Peccerillo,1999). This makes of the Aeolian Islands a complex volcanism, with a still controversial origin. In this context, the aim of this work is to constrain the sources and spatio-temporal evolution of this magmatism. We present here new K-Ar ages based on the accurate Cassignol-Gillot technique devoted to the dating of very young rocks (Gillot et Cornette, 1986). These geochronological data were used together with new geochemical data on the same samples. In this study, we attempt to understand the origin of those magmatic events and the relationship between the deep processes and the shallow structures. Our results allow us to define specific periods of very quick geomechemical changes. In the case of Filicudi island, the first rocks range in composition from CA basalts to andesites. This period ended with the edification of the Mte Guardia at 189�

Rb-Sr isochronous age of Vepor pluton granitoids

International Nuclear Information System (INIS)

Bagdasaryan, G.P.; Gykasyan, R.Kh.; Cambel, B.

1986-01-01

The result are presented of geochronological investigations of the Vepor pluton granitoids by the Rb-Sr isochronous method. The results prove the Variscan age of granodiorite magmatism of the Sihla type (387±27 m.y.) and the Early Variscan age of leucocratic granitoids of the Vepor and the Ipel types (284±22 m.y.). Since the initial ratio of 87 Sr/ 86 Sr in granitoids of the Sihla type is 0.7054 and of the Vepor type 0.7060, it can be assumed that during the formation of the granitoids of veporides there was an increased supply of matter from the main source affecting genesis of granitoids. The results prove a polyphase character of the Variscan granitoids of Veporicum. (author)

Petrology and tectonics of Phanerozoic continent formation: From island arcs to accretion and continental arc magmatism

Science.gov (United States)

Lee, C.-T.A.; Morton, D.M.; Kistler, R.W.; Baird, A.K.

2007-01-01

Mesozoic continental arcs in the North American Cordillera were examined here to establish a baseline model for Phanerozoic continent formation. We combine new trace-element data on lower crustal xenoliths from the Mesozoic Sierra Nevada Batholith with an extensive grid-based geochemical map of the Peninsular Ranges Batholith, the southern equivalent of the Sierras. Collectively, these observations give a three-dimensional view of the crust, which permits the petrogenesis and tectonics of Phanerozoic crust formation to be linked in space and time. Subduction of the Farallon plate beneath North America during the Triassic to early Cretaceous was characterized by trench retreat and slab rollback because old and cold oceanic lithosphere was being subducted. This generated an extensional subduction zone, which created fringing island arcs just off the Paleozoic continental margin. However, as the age of the Farallon plate at the time of subduction decreased, the extensional environment waned, allowing the fringing island arc to accrete onto the continental margin. With continued subduction, a continental arc was born and a progressively more compressional environment developed as the age of subducting slab continued to young. Refinement into a felsic crust occurred after accretion, that is, during the continental arc stage, wherein a thickened crustal and lithospheric column permitted a longer differentiation column. New basaltic arc magmas underplate and intrude the accreted terrane, suture, and former continental margin. Interaction of these basaltic magmas with pre-existing crust and lithospheric mantle created garnet pyroxenitic mafic cumulates by fractional crystallization at depth as well as gabbroic and garnet pyroxenitic restites at shallower levels by melting of pre-existing lower crust. The complementary felsic plutons formed by these deep-seated differentiation processes rose into the upper crust, stitching together the accreted terrane, suture and former

A-type and I-type granitoids and mylonitic granites of Hassan Salaran area of SE Saqqez, Kurdistan, Iran

Science.gov (United States)

Abdullah, Fakhraddin Mohammad; Saeed Ahmad, Sheler

2014-05-01

The Hassan Salarn area is located 20km to southeast of Saqqez city in Kurdistan Province, western Iran. In this area there are two distinct granitic rock suites consisting A-type and I-type granites and also mylonitic granites. These A-type and I-type granites have various petrological and geochemical characteristics. They also have different origins and petrogenesis. A-type granitoids comprise alkali feldspar granite, syenogranite and quartz alkali feldspar syenite, whereas I-type granitoids are composed of monzogranite, granodiorite and tonalite. Geochemically, A-type granitoids are peralkaline and acmite-normative but I-type granitoids are subalkaline (calc-alkaline), metaluminous and diopside-normative. A-type granitoids are also ferroan alkali and ferroan alkali-calcic whereas I-type granitoids are magnesian and calcic. A-type granitoids resemble to within plate granites and post-orogenic granites whereas I-type granitoids resemble to volcanic arc granites. A-type granitoids contain higher concentrations of alkalies, Zr, Rb, Nb, Y, Th, Ce, high FeO/MgO ratios and lower concentrations of Mg, Ca and Sr, resembling post-orogenic A-type granites. It is possible that heat from a mantle-derived magma which intruded into the lower crust, and/or rapid crustal extension have been essential generation of approriate melts producing A-type granitoids. Thus we can conclude that A-type granitoids were generated from a mixed mantle-crust source. Negative Nb anomalies and low contents of Ti and P probably indicate a subduction-related origin for protolith of I-type granitoids. Negative Nb anomalies and enrichment in Ce relative to its adjacent elements can be related to involvement of continental crust in magmatic processes. I-type granitoids are also enriched in Rb, Ba, K, Th, Ce and depleted in Nb, Zr and Y, indicating that they have had interacted with crust. I-type granitoids may result from contamination of mantle-derived magmas by continental crust during a subduction

Geological constraints on continental arc activity since 720 Ma: implications for the link between long-term climate variability and episodicity of continental arcs

Science.gov (United States)

Cao, W.; Lee, C. T.

2016-12-01

Continental arc volcanoes have been suggested to release more CO2 than island arc volcanoes due to decarbonation of wallrock carbonates in the continental upper plate through which the magmas traverse (Lee et al., 2013). Continental arcs may thus play an important role in long-term climate. To test this hypothesis, we compiled geological maps to reconstruct the surface distribution of granitoid plutons and the lengths of ancient continental arcs. These results were then compiled into a GIS framework and incorporated into GPlates plate reconstructions. Our results show an episodic nature of global continental arc activity since 720 Ma. The lengths of continental arcs were at minimums during most of the Cryogenian ( 720-670 Ma), the middle Paleozoic ( 460-300 Ma) and the Cenozoic ( 50-0 Ma). Arc lengths were highest during the Ediacaran ( 640-570 Ma), the early Paleozoic ( 550-430 Ma) and the entire Mesozoic with peaks in the Early Triassic ( 250-240 Ma), Late Jurassic-Early Cretaceous ( 160-130 Ma), and Late Cretaceous ( 90-65 Ma). The extensive continental arcs in the Ediacaran and early Paleozoic reflect the Pan-African events and circum-Gondwana subduction during the assembly of the Gondwana supercontinent. The Early Triassic peak is coincident with the final closure of the paleo-Asian oceans and the onset of circum-Pacific subduction associated with the assembly of the Pangea supercontinent. The Jurassic-Cretaceous peaks reflect the extensive continental arcs established in the western Pacific, North and South American Cordillera, coincident with the initial dispersal of the Pangea. Continental arcs are favored during the final assembly and the early-stage dispersal of a supercontinent. Our compilation shows a temporal match between continental arc activity and long-term climate at least since 720 Ma. For example, continental arc activity was reduced during the Cryogenian icehouse event, and enhanced during the Early Paleozoic and Jurassic-Cretaceous greenhouse

K-Ar age and tectonic setting of brannerite-mineralized Futagojima granodiorite, Koshiki Islands, Southern Kyushu

International Nuclear Information System (INIS)

Ishihara, Shunso; Shibata, Ken; Terashima, Shigeru

1984-01-01

Futagojima granodiorite, which was previously thought to be a part of Cretaceous Ryoke granitoids, is turned out to be upper Miocene granitoids (7.5 Ma). The granodiorite contains magnetite and is depleted in lithophile components. This is characteristics of magnetite-series granitoids in the Green Tuff terrains. All the Miocene granitoids in Koshiki Islands are relatively mafic consisting of hornblende-bearing facies such as quartz diorite, tonalite and granodiorite; thus belonging to I-type magnetite series. These rocks are considered to have generated at depth and formed along a rift zone during Miocene time (13 - 7 Ma). Thus, Koshiki Islands may represent an aborted rift at margin of the Danjo basin. Miocene granitoids of Koshiki Islands are small stocks but magmatic-hydrothermal ore deposits are only seen in Futagojima. This localization of mineralization is explained by a high degree of magmatic fractionation, which is only observed in Futagojima and by a low rate of erosion to preserve the mineralized horizons. Mineralization here is unique having brannerite-magnetite and chalcopyrite-molybdenite-quartz assemblages. No gold and silver were detected from the vein-type deposit. (author)

Seismic activity around and under Krakatau volcano, Sunda Arc: constraints to the source region of island arc volcanics

Czech Academy of Sciences Publication Activity Database

Špičák, Aleš; Hanuš, Václav; Vaněk, Jiří

2002-01-01

Roč. 46, č. 3 (2002), s. 545-565 ISSN 0039-3169 R&D Projects: GA ČR GA205/97/0898; GA AV ČR IAA3012002 Institutional research plan: CEZ:AV0Z3012916 Keywords : Krakatau * Sunda Strait seismicity * island arc volcanism * subduction * Wadati-Benioff zone Subject RIV: DC - Siesmology, Volcanology, Earth Structure Impact factor: 0.571, year: 2002

Indoor radon related to uranium in granitoids of the Central Bohemian plutonic complex

International Nuclear Information System (INIS)

Barnet, I.; Fojtikova, I.

2004-01-01

The study is based on the indoor radon data (one year measurements, Kodak LR 115 track etch detectors), vectorized geological maps 1:50000, vectorized coordinates of dwellings and uranium data for granitoid types of the Central Bohemian Plutonic Complex (CBPC). Using ArcGis 8.2 programme, the position of 16145 dwellings was linked to a geological database covering the CBPC (approx. 3200 km 2 ), and the type of underlying rock type was specified for each house. The resulting databases enabled us to calculate the mean EEC indoor Rn data for particular granitoid types and to study the relationship between the indoor Rn and the U concentrations. The petrogenetically variable CBPC was emplaced during Variscan orogenesis (330-350 Ma) and is among the most radioactive rock types within the Bohemian Massif. A long-term process of CBPC genesis resulted in more than 20 granitoid types, differing by their petrogenetic characteristics as well as mineralogical and chemical composition, including uranium concentration. The relation between the mean indoor radon values and uranium concentrations in particular rock types was examined. A positive regression between indoor Rn and uranium as the source of Rn soil gas clearly demonstrates how regional geology influences the indoor radon activity concentration in dwellings. The highest indoor Rn concentrations were observed in the Sedlcany granodiorite and Certovo bremeno syenite, where also the highest gamma dose rates (150-210 nGy.h -1 ) within all granitoid types in the Czech Republic were observed. The two rock types differ from other granitoids by a relatively high zircon concentration, which is the main source of U and subsequently of soil gas Rn being released from the bedrock. The lower indoor Rn values of Certovo bremeno syenite which do not correspond with the high U concentrations can be explained by a relatively low permeability of its clayey weathering crust. This feature was also observed for soil gas radon concentration

Temporal geochemical trends in northern Luzon arc lavas (Philippines): implications on metasomatic processes in the island arc mantle

International Nuclear Information System (INIS)

Maury, R.C.; Bellon, H.; Jacques, D.; Defant, J.; Joron, J.L.; Mcdermott, F.; Vidal, Ph.

1998-01-01

Neogene and Quaternary lavas from Batan, Babuyan de Claro, Camiguin and Calayan islands (northern Luzon arc) display temporal increases in incompatible elements including Cs, Rb, Ba, K, La, Ce, Th, U, Ta, Hf and Zr from volcanoes older than 3 Ma to younger ones. These enrichments occur either within a single island (Batan) or within an island group (from Calayan to Camiguin and Babuyan). We show that these enrichments result from incompatible element input into the mantle wedge rather than from partial melting or fractionation effects. The fact that highly incompatible elements display temporal enrichment patterns in Batan lavas whatever their chemical properties indicates that hydrous fluids are not the only metasomatic agents operating in the mantle wedge and that slab-derived melts (adakitic magmas) may also be involved. The coupled temporal variation patterns of large ion lithophile elements and Sr-Nd isotopes suggest that the metasomatic budgets beneath the southern group of islands are mainly controlled by hydrous fluids inputs. In contrast, young Batan lavas likely derive from a mantle source mostly metasomatized by adakitic magmas. (authors)

Eocene to Miocene back-arc basin basalts and associated island arc tholeiites from northern Sulawesi (Indonesia): Implications for the geodynamic evolution of the Celebes basin; Basaltes de bassin arriere-arc de l`Eocene-Miocene et tholeiites d`arc insulaire associees du nord Sulawesi (Indonesie): implications pour l`evolution geodynamique du bassin des Celebes

Energy Technology Data Exchange (ETDEWEB)

Rangin, C. [Centre National de la Recherche Scientifique (CNRS), 75 - Paris (France); Maury, R.C.; Bellon, H.; Cotten, J. [Universite de Bretagne Occidentale, 29 - Brest (France); Polve, M. [Universite Paul Sabatier, 31 - Toulouse (France); Priadi, B.; Soeria-Atmadja, R. [Department of Geology, ITB, Bandung (Indonesia); Joron, J.L. [CEA Centre d`Etudes de Saclay, 91 - Gif-sur-Yvette (France). Dept. de Recherche sur l`Etat Condense, les Atomes et les Molecules

1997-12-31

Eocene BABB basalts intruded by tholeiitic and calk-alkalic island arc magmatic rocks are reported from the north arm of Sulawesi (Indonesia). Age and geochemical similarities between these basalts and those drilled in the Celebes Sea indicate this North Sulawesi volcanic arc was built on the same oceanic crust. The 25 deg late Neogene clockwise rotation of the north arm of Sulawesi following its collision with fragments of Australia (Sula, Buton) is not sufficient to explain the asymmetrical magnetic anomalies in the Celebes basin. The North Sulawesi island arc could be interpreted as having progressively retreated northward on its own Celebes sea back arc basin, during an episode of Palaeogene-early Neogene tectonic erosion along the trench. (authors) 37 refs.

Melting of subducted continental crust: Geochemical evidence from Mesozoic granitoids in the Dabie-Sulu orogenic belt, east-central China

Science.gov (United States)

Zhao, Zi-Fu; Liu, Zhi-Bin; Chen, Qi

2017-09-01

Syn-collisional and postcollisional granitoids are common in collisional orogens, and they were primarily produced by partial melting of subducted continental crust. This is exemplified by Mesozoic granitoids from the Dabie-Sulu orogenic belt in east-central China. These granitoids were emplaced in small volumes in the Late Triassic (200-206 Ma) and the Late Jurassic (146-167 Ma) but massively in the Early Cretaceous (111-143 Ma). Nevertheless, all of them exhibit arc-like trace element distribution patterns and are enriched in Sr-Nd-Hf isotope compositions, indicating their origination from the ancient continental crust. They commonly contain relict zircons with Neoproterozoic and Triassic U-Pb ages, respectively, consistent with the protolith and metamorphic ages for ultrahigh-pressure (UHP) metaigneous rocks in the Dabie-Sulu orogenic belt. Some granitoids show low zircon δ18O values, and SIMS in-situ O isotope analysis reveals that the relict zircons with Neoproterozoic and Triassic U-Pb ages also commonly exhibit low δ18O values. Neoproterozoic U-Pb ages and low δ18O values are the two diagnostic features that distinguish the subducted South China Block from the obducted North China Block. Thus, the magma source of these Mesozoic granitoids has a genetic link to the subducted continental crust of the South China Block. On the other hand, these granitoids contain relict zircons with Paleoproterozoic and Archean U-Pb ages, which are present in both the South and North China Blocks. Taken together, the Mesozoic granitoids in the Dabie-Sulu orogenic belt and its hanging wall have their magma sources that are predominated by the continental crust of the South China Block with minor contributions from the continental crust of the North China Block. The Triassic continental collision between the South and North China Blocks brought the continental crust into the thickened orogen, where they underwent the three episodes of partial melting in the Late Triassic, Late

Lead isotopic compositions of South Sandwich Island volcanic rocks and their bearing on magmagenesis in intra-oceanic island arcs

International Nuclear Information System (INIS)

Barreiro, B.

1983-01-01

Pb isotope ratios have been measured in 12 volcanic rocks from the South Sandwich Islands. The results are reported. In 207 Pb/ 204 Pb- 206 Pb/ 204 Pb and 208 Pb/ 204 Pb- 206 Pb/ 204 Pb correlation diagrams, the South Sandwich data plot distinctly above the fields for ocean ridge basalts, and yield trends showing apparent mixing with a sedimentary end member similar to South Atlantic pelagic sediments as reported by Chow and Patterson (1962) and this study. Armstrong and Cooper (1971) have likewise shown that volcanics from the Lesser Antilles show mixing trends with North Atlantic sediments in Pb isotope correlation diagrams. The North Atlantic sediments have distinctly higher 206 Pb/ 204 Pb and 208 Pb/ 204 Pb ratios compared to the South Atlantic sediments. The parallel relationships between sediments and volcanic island arc rocks of the North and South Atlantic provide strong evidence for a component of Pb from subducted sediments in the lavas of the west Atlantic basin. In contrast to these data, lavas from the Mariana Arc in the western Pacific show little or no component of Pb from pelagic sediments. The reason for the different behaviors in the two settings is speculative. (author)

Granitoid magmatism of Alarmaut granite-metamorphic dome, West Chukotka, NE Russia

Science.gov (United States)

Luchitskaya, M. V.; Sokolov, S. D.; Bondarenko, G. E.; Katkov, S. M.

2009-04-01

]. Analyses of cores of some zircons from granodiorites of Lupveem batholith indicate Precambrian age of protolith (717, 1070.4 and 1581.5 m.a.) [15]. 40Ar-39Ar age of synmetamorphic biotite varies from 108 to 103 m.a. [15]. Intrusive rocks of Alarmaut dome are represented by wide spectrum of rocks: diorites, Q diorites, Q monzodiorites, granodiorites, tonalites, granites. Granodiorites and granites contain mafic enclaves of monzonites and Q monzonites. SiO2 contents in rocks of Alarmaut dome varies from 58,55% in diorites to 71,3% in granites; in enclaves - from 54,6% in monzonites to 61.89% in Q monzonites. Granitoids are normal and subalkaline rocks according to SiO2 vs K2O+Na2O and belong to high-K calc-alkaline and shoshonite series according to K2O vs SiO2. They are mainly metaluminous rocks (ASI intermediate rocks are characterized by LREE enrichment, HREE depletion and insignificant negative Eu-anomaly (LaN/YbN=8,42-15,69; Eu/Eu*=0,66-0,94). Granodiorites and granites REE patterns are more enriched in LREE, more depleted in HREE and have deeper negative Eu-anomaly (LaN/YbN=11,48-45,6; Eu/Eu*=0,47-0,81). REE patterns of monzonites from enclaves in granites and granodiorites are similar to patterns of host rocks. REE patterns of intermediate rocks and granodiorites are well correlated with those of "mafic root" rocks of K2 Kigluaik pluton from the core part of the same name gneiss dome, Seward Peninsula, Alaska [16], and K1-2 granitoids of Chauna fold zone, West Chukotka [17]. Spidergrams of granitoids and enclaves are similar and characterized by LILE, LREE enrichment and Nb, Sr, P, Ti depletion, typical for supra-subduction magmatites. On F1-F2 diagram [18], separating granitoids by geodynamic settings, granitoids fall in the field of collisional granites; on Rb vs Y+Nb diagram, along the boundary between the fields of syncollisional granites and volcanic arc granites, but within the field of postcollisional [19]. Geochronological and structural data indicate temporal

K, Rb and Sr abundances and Sr isotopic composition of the Tanzawa granitic and associated gabbroic rocks, Japan: low-potash island arc plutonic complex

International Nuclear Information System (INIS)

Ishizaka, K.; Yanagi, T.

1977-01-01

The granitic and associated gabbroic rocks of the Tanzawa plutonic complex of Miocene age occurring in the northern part of the Izu-Bonin arc are characterized by low abundances of K (229-6790 ppm) and Rb (0.414-12.1 ppm), low K 2 O/Na 2 O ratios (0.037-0.21), moderately high K/Rb ratios (541-630), low Rb/Sr ratios (0.00137-0.0579) and low initial 87 Sr/ 86 Sr ratios (0.70332-0.70372). This indicates that acid to intermediate plutonic rocks with these geochemical characteristics also occur in island arc environments besides mid-oceanic ridge environments. They represent, together with associated gabbroic rocks, a low-potash island arc plutonic complex and are expected to occur beneath young island arcs, although now unexposed. The Tanzawa plutonic complex may have been formed by differentiation of low-K calc-alkaline magma. (Auth.)

Geochemical characteristics of granitoids and related mafic granulites from the Pan-African Dahomeyide belt, southeastern Ghana

International Nuclear Information System (INIS)

Aidoo, F.

2012-07-01

-23%) and sometimes sericite and microline. The mafic granulites contain SiO 2 content of 43.10-49.40 wt. % with low to moderate Mg# of 37-60. They exhibit fractionated REE patterns with (La/Sm) N = 1.80-5.85 and (La/Yb) N = 3.76-76.30, and negative and positive Eu anomalies (Eu/Eu*'' = 0.68-2.10). The mafic granulites show total REEs content of 17.86-1245.13 ppm with Eu/Eu*'' between 1.01 and 1.36. Two types of mafic granulites are identified with one type displaying un-fractionated (flat), MORB-like REE patterns whereas the other shows slightly fractionated to highly fractionated, IAT-like REE patterns. The primitive mantle-normalised trace element patterns of the granulites show subduction-related geochemical characteristics. The LREE-enriched type show pronounced negative Th, U, Ta, Nb, Zr and Hf anomalies and positive l3a and Sr I) pical arc roots, whereas the un-fractionated type show pronounced Th-U trough, but slightly negative Ta, Nb, Hf, Ti anomalies and positive Ba and Sr anomalies, suggesting subduction inputs in the protolith of the MORB-like granulites. Thus, the mafic granulites show both N-MORB and IAT imprints. The ultramafic rock, AD6, associated with the mafic granulites is composed mainly of pyroxene (60%), plagioclase (13%), olivine (12%), hornblende (6%) and sericite (4%). It contains SiO 2 content of 52.80 wt. %; low TiO 2 (0.25 wt. %) and has very high Mg# of 84. The ultramaf-ic rock also shows total REEs content of 64.85 ppm, very high Cr of 3520 ppm and Ni of 48I ppm. The ultramafic rocks also show typical IAT signatures. In general, the mafic granulites and ultramafic rocks from the suture zone assemblages of the Dahomeyide belt suggest subduction zone magmatism with oceanic crust forming in either a back-arc basin or intra-arc basin environment. The geochemical characteristics of the granitoid gneisses from the external nappes (basement complex) also show subduction-related magmatic activity. Therefore, all the rocks studied

K-Ar geochronology and palaeomagnetism of volcanic rocks in the lesser Antilles island arc

International Nuclear Information System (INIS)

Briden, J.C.; Rex, D.C.; Faller, A.M.; Tomblin, J.F.

1979-01-01

K-Ar age determinations on rocks and minerals from 95 locations in the Lesser Antilles. An age range of 38 - 10 million years was found for the outer arc (Limestone Caribbees) but less than 7.7 million years in the inner arc (Volcanic Caribbees). From Martinique southwards the two arcs are superimposed. These age ranges fit between discontinuities in sea floor spreading in the North Atlantic at about 38 and 9 million years and a causal connection between spreading change and relocation of arc volcanicity is suggested. Paleomagnetic directions at 108 localities in 10 islands fall into normal and reversed groups with 6 sites intermediate and 5 indeterminate. The mean dipole axis is within 2% of the present rotation axis. The data generally agrees with the established geomagnetic polarity time scale but there is some suggestion of a normal polarity event at about 1.18 million years. The paleomagnetic data suggest that in the past 10 million years the Lesser Antilles have not changed their latitude or geographical orientation and the geomagnetic field has averaged that of a central axial dipole. (author)

Petrotectonic framework of granitoids and associated granulites at ...

Indian Academy of Sciences (India)

tion that wraps around the feldspar augen. The sheared granitoid ..... 1987) has been used to classify the granitoids ... The data for all the analyses used in the diagrams are given in table 1. ..... Different stages of crystal-plastic deformation are.

Volcano-Hydrothermal Systems of the Kuril Island Arc (Russia): Geochemistry of the Thermal Waters and Gases.

Science.gov (United States)

Kalacheva, E.; Taran, Y.; Voloshina, E.; Kotenko, T.; Tarasov, K.

2017-12-01

More than 30 active volcanoes with historical eruptions are known on 20 main islands composing the Kuril Arc. Eight islands - Paramushir, Shiashkotan, Rasshua, Ushishir, Ketoy, Urup, Iturup and Kunashir - are characterized by hydrothermal activity, complementary to the fumarole activity in the craters and volcano slopes. At Paramushir, Shiashkotan, Iturup and Kunashir most of thermal manifestations are acidic to ultra-acidic hot springs associated with hydrothermal aquifers inside volcano edifices. The most powerful of them is the ultra-acid hydrothermal system of Ebeko volcano (Paramushir island) with more than 80 t/day of the chloride output and pH of springs of 1.5. At the summit part of the Ebeko volcano there are 12 thermal fields with the total thermal area exceeding 1 km2. The measured temperatures of fumaroles are from 98º C to 500ºC. Another type of hydrothermal activity are the wide spread coastal hot and neutral springs situated as a rule within the tide zone. Four groups of this type of thermal manifestation were found on the western shore of Shiashkotan island. It have Na-Ca-Cl-SO4 composition with temperatures 50-80°C and TDS 7-8 g/L. Coastal neutral springs were found also on Russhua, Uturup and Kunashir islands. Ushishir volcano-hydrothermal system in the middle of the arc is formed by the absorption of magmatic gases by seawater. In the crater of the Pallas cone (Ketoy island) there is a small Glazok lake with acid SO4 water and pH=2.4, TDS=2g/L, T=12oC. Ketoy volcano on the same island hosts a high temperature hydrothermal system with unusual boiling Ca-Na-SO4 neutral springs and steam vents. Mendeleev and Golovnin volcanoes on Kunashir Island are the southernmost of the Kuril arc. Mendeleev edifice is a centre of a large thermal area with many manifestations of different types including steam vents, acid springs and neutral coastal springs. In a 4.2x4 km wide caldera of Golovnin volcano there are two lakes with acid Cl-SO4 water and numerous

Granitoides paleozoicos de la Sierra de Narváez, Sistema de Famatina, Argentina: Hibridización de magmas en un margen continental activo

Directory of Open Access Journals (Sweden)

Cisterna, C. E.

1992-12-01

Full Text Available The granitoids from the Sierra de Narváez were investigated for their geochemical and petrographical characteristics. They are composed of calc-alkaline granites, granodiorites and tonalites, similar to the other paleozoic granitoids of the Famatina System. These rocks are intrusive in the Las Planchadas (volcanic rocks and Suri (sedimentary rocks Formations, which are probably cogenetic with the granitoids within the same magmatic cycle.The study of the granitoids reveals the close relationship between their composition and the abundance of the enclosed magmatic inclusions. The latter represent rocks and granodioritic tonalitic and diorite composition, and have a great number of mineralogical characteristic that suggest the presence of two magmas, mafic and felsic for the origin of such enclaves.The close chemical relationship existing between the inclusions and their host rocks shows that the mafic and felsic components are compositionally modified and that the granitoids are more or less hybridized.Trace elements discrimination diagrams have been used as a tools for fingerprinting the tectonic setting of the Sierra de Narváez granitoids. The geochemistry as well as the geologic relations of the granitoids with the roughly coeval ordovician vulcanism indicate a volcanic arc environment.Las rocas que afloran en el extremo septentrional de la Sierra de Narváez están representadas por una asociación de monzogranitos, granodioritas y tonalitas que definen una serie calcoalcalina, de características similares a las de otros intrusivos del Paleozoico del Sistema de Famatina. Estos granitoides se hallan intruyendo las Formaciones Las Planchadas y Suri, representadas por vulcanitas y metasedimentitas, respectivamente, y corresponderían a un mismo evento magmático del Paleozoico Inferior.Los granitoides estudiados presentan abundantes inclusiones ígneas de composición granodiorítica o tonalítica y diorítica. La estrecha relación que

Crustal evolution of granitoids and gneisses from the Cambaizinho belt, southern Brazil: Review zircon Pb-Pb evaporation ages and Pb-Nd-Sr isotopes

International Nuclear Information System (INIS)

Remus, M.V.D; Macambira, M.B; Hartmann, L.A.; Beilfuss, M

2001-01-01

Deformed granitoids and gneisses from the Cambai Complex (900-700 Ma) along Cambaizinho Creek and in the Vila Nova do Sul region, state of Rio Grande do Sul, Brazil, were formed in a remarkably short time, about 10 m.y., between 704±13 and 697±3 Ma. The data base of this work includes eighteen zircon Pb/Pb evaporation analyses, five Pb isotope in feldspar and whole rock. The oldest known rocks in the region are polydeformed dioritic gneisses dated by conventional U-Pb zircon at 704±13 Ma. New Pb-Pb zircon evaporation data on the late transcurrent, less deformed and more evolved granitoids (Sanga do Jobim Granitoids) yield a 697± Ma age and indicates that the evolution of the plutonic magmatism in the area was nearly contemporaneous. These data contrast with previous interpretations based on Rb-Sr data which considered that these rock associations were formed during a longer time period (700-640 Ma). All these granitoids intruded the supracrustal sequence. These granitoids yield a minimum age of about 700 Ma for the formation of the supracrustal sequence and its regional dynamothermal metamorphism. Lead isotope composition of K-feldspar from Sanga do Jobim Granitoids plot close to, but slightly below the lead isotope evolution curve of orogeny in the Zartmann and Doe model (1981). This indicates that the setting for these granitoids was that of a juvenile magmatic arc. These new data plus previous data in the region also corroborate that the crustal evolution involved juvenile crust accreted between 760-700 Ma. In contrast, the Cacapava and Sao Sepe Granites intruded the supracrustal sequences along the eastern side of the Sao Gabriel Block at 562 Ma and 550 Ma, respectively, and show Pb and Nd isotope signatures from an old basement. This evidence suggests that the juvenile terrane was thrusted over the older basement situated along the eastern part of the shield during the Dom Feliciano collisional orogeny at about 620-590 Ma (au)

THE NEOPROTEROZOIC ISLAND-ARC ASSOCIATION OF THE MUKODEK GOLD-ORE FIELD, NORTHERN BAIKAL AREA

Directory of Open Access Journals (Sweden)

V. A. Vanin

2014-01-01

Full Text Available Metamorphosed volcanic rocks of the Ushmukan suite were studied in the Mukodek gold-ore field located in the Baikal-Muya belt in the Northern Baikal area, Russia. The Ushmukan suite shows interleaving of ortoschists which compositions are widely variable. Basalt-andesite-dacite series of normal alkalinity are the substrate of the studied metavolcanic rocks. Based on the set of geochemical characteristics, it is concluded that the rocks were formed in suprasubduction geodynamic conditions corresponding to a mature island arc. The proximity of the geological locations and the similarity of the geochemical characteristics of the volcanic rocks of the Ushmukan suite and rocks of the Kelyan suite (Neoproterozoic, 823 Ma, which have similar compositions, give grounds to consider these two rock suites as age peers. Specific features of gold distribution through the Mukodek gold-ore field are analyzed. Industrial gold contents are recorded only in berezite-listvenite metasomatic rocks of the gold-quartz-sulfide formation which were formed on metavolcanic rocks of the Ushmukan suite. It is concluded that the volcanic rocks, which are specific of the island-arc setting, could be a source of gold for deposits in the Mukodek gold-ore field. 

Structural, Geochemical, and Isotopic Studies on Magmatic Dyke Swarms of the South Shetland Islands Volcanic Arc, West Antarctica - Revealing the Geodynamic History

Science.gov (United States)

Kraus, S.; Miller, H.

2003-12-01

Between 2000 and 2002 areas of up to 100,000 m2 have been mapped at several locations of the South Shetland Islands, mainly on King George and Livingston Islands. A structural analysis of the dykes and the host rocks was undertaken, and about 250 dykes were sampled for geochemical studies. On Livingston Island six different strike directions were identified, yielding a reliable relative time sequence as deduced from field-relationships. Geochemically, these dykes can be separated into five different groups, correlating with the different strike directions, one of those groups comprising two directions. Analysis of the structural data shows, that at least on Livingston Island only minor changes of the tensional situation occurred. Geochemical data reveal that all dykes of the South Shetland Islands belong to a calc-alkaline, arc-related suite, ranging from primitive basalts to highly differentiated rhyolites. Interpretation of Sr isotopic data of the dykes proves difficult, as there are indications for sea-water induced Sr-alteration. Nd isotopic analysis yield better results, revealing a three-stage development from the oldest dykes (ɛ Nd -0.2 to 0.6) on Livingston Island towards a second, younger group (ɛ Nd 2.8 to 4.2, also Livingston), terminating with a third one (ɛ Nd 5.2 to 7.6), which includes the youngest dykes on Livingston and all dykes on King George and also Penguin Island. Either two mantle sources were involved, or the amount of crustal contamination changed considerately with time. It may have been high during initial arc volcanism, because of a still unstretched crust, then decreasing continually with progressing volcanism. In any case, the pattern reflects a chronological sequence corresponding with other authors' hypothesis of a migrating arc volcanism from SW to NE, i.e. from Livingston (older dykes) towards King George Island (younger dykes). Pb isotopic data, plottet together with MORB- and sediment-samples dredged from the Drake Passage

Geochemistry of southern Pagan Island lavas, Mariana arc: The role of subduction zone processes

Science.gov (United States)

Marske, J.P.; Pietruszka, A.J.; Trusdell, F.A.; Garcia, M.O.

2011-01-01

New major and trace element abundances, and Pb, Sr, and Nd isotopic ratios of Quaternary lavas from two adjacent volcanoes (South Pagan and the Central Volcanic Region, or CVR) located on Pagan Island allow us to investigate the mantle source (i.e., slab components) and melting dynamics within the Mariana intra-oceanic arc. Geologic mapping reveals a pre-caldera (780-9.4ka) and post-caldera (<9.4ka) eruptive stage for South Pagan, whereas the eruptive history of the older CVR is poorly constrained. Crystal fractionation and magma mixing were important crustal processes for lavas from both volcanoes. Geochemical and isotopic variations indicate that South Pagan and CVR lavas, and lavas from the northern volcano on the island, Mt. Pagan, originated from compositionally distinct parental magmas due to variations in slab contributions (sediment and aqueous fluid) to the mantle wedge and the extent of mantle partial melting. A mixing model based on Pb and Nd isotopic ratios suggests that the average amount of sediment in the source of CVR (~2.1%) and South Pagan (~1.8%) lavas is slightly higher than Mt. Pagan (~1.4%) lavas. These estimates span the range of sediment-poor Guguan (~1.3%) and sediment-rich Agrigan (~2.0%) lavas for the Mariana arc. Melt modeling demonstrates that the saucer-shaped normalized rare earth element (REE) patterns observed in Pagan lavas can arise from partial melting of a mixed source of depleted mantle and enriched sediment, and do not require amphibole interaction or fractionation to depress the middle REE abundances of the lavas. The modeled degree of mantle partial melting for Agrigan (2-5%), Pagan (3-7%), and Guguan (9-15%) lavas correlates with indicators of fluid addition (e.g., Ba/Th). This relationship suggests that the fluid flux to the mantle wedge is the dominant control on the extent of partial melting beneath Mariana arc volcanoes. A decrease in the amount of fluid addition (lower Ba/Th) and extent of melting (higher Sm/Yb), and

Application of Satellite Geodesy in Analyzing the Accelerated Movement of the Back-arc Rifting in the Izu Bonin Islands, Japan

Science.gov (United States)

Arisa, D.; Heki, K.

2014-12-01

The Izu-Bonin islands lies along the convergent boundary between the subducting Pacific plate (PA) and the overriding Philippine Sea plate (PH) in the western Pacific. Nishimura (2011) found that the back-arc rifting goes on behind the Izu arc by studying the horizontal velocities of GNSS stations on the Izu islands. Here we show that this rifting has accelerated in 2004 using GNSS data at Aogashima, Hachijoujima, and Mikurajima stations. The back-arc rifting behind the Izu islands can be seen as the increasing distance between stations in the Izu-Bonin islands and stations located in the stable part of PH. We found that their movement showed clear acceleration around the third quarter of 2004. Obtaining the Euler vector of the PH is necessary to analyzed the movement of each stations relative to the other stations on the same plate. The analyzing of GPS timeseries leads us to one initial conclusion that some accelerated movement started to occur in the third quarter of 2004. This event was closely related to the earthquake on May 29, 2004 in Nankai Trough and September 5, 2004 earthquake near the triple junction of Sagami Trough. The analyzing process help us to understand that this accelerated movement was not the afterslip of any of these earthquakes, but it was triggering these area to move faster and further than it was. We first rule out the best possible cause by constraining the onset time of the accelerated movement, and correlating it with the earthquakes. May 29, 2004 earthquake (M6.5) at the PA-PH boundary clearly lacked the jump which should mark the onset of the eastward slow movement. Moreover, additional velocity vectors do not converge to the epicenter, and onset time that minimizes the post-fit residual is significantly later than May. We therefore conclude that accelerated movement started in 2004 was not due to the afterslip of interplate earthquake in May 29. On the next step we found that the onset time coincides with the occurrence of

Potassium-argon ages of two granitoids northwest of Kumasi, Ghana

International Nuclear Information System (INIS)

Agyei, E.K.

1989-01-01

Four granitic samples from two granitoids northwest of Kumasi,Ghana, have been dated using the conventional K-Ar method. Two samples NB1 NB2 from a road-cutting at Nyamebekyere village, located about 60 km from Kumasi on the Kumasi-Sunyani road gave biotite ages of 2144+/= 11 Ma and 2144+/=7 Ma, respectively. The biotite ages for two samples NTN1 and NTN2 from Kassardjan quarry, located about 3 km south of the Kumasi-Sunyani road at Ntensere village some 20 km northwest of Kumasi were 2070+/= 10 Ma and 2099+/=14 Ma, respectively. A hornblende age of 2169+/=26 Ma was obtained for NTN2 which suggests a slow cooling during the uplift of the granitoid. Although the biotite ages obtained here for the two G2 granitoids are older than most of the reported biotite ages which happen to be for G1 granites, it is too premature to generalize that G2 granitoids are older than G1 granitoids. (author). 21 refs. 1 fig. 1 tab

On the time-scales of magmatism at island-arc volcanoes.

Science.gov (United States)

Turner, S P

2002-12-15

Precise information on time-scales and rates of change is fundamental to an understanding of natural processes and the development of quantitative physical models in the Earth sciences. U-series isotope studies are revolutionizing this field by providing time information in the range 10(2)-10(4) years, which is similar to that of many modern Earth processes. I review how the application of U-series isotopes has been used to constrain the time-scales of magma formation, ascent and storage beneath island-arc volcanoes. Different elements are distilled-off the subducting plate at different times and in different places. Contributions from subducted sediments to island-arc lava sources appear to occur some 350 kyr to 4 Myr prior to eruption. Fluid release from the subducting oceanic crust into the mantle wedge may be a multi-stage process and occurs over a period ranging from a few hundred kyr to less than one kyr prior to eruption. This implies that dehydration commences prior to the initiation of partial melting within the mantle wedge, which is consistent with recent evidence that the onset of melting is controlled by an isotherm and thus the thermal structure within the wedge. U-Pa disequilibria appear to require a component of decompression melting, possibly due to the development of gravitational instabilities. The preservation of large (226)Ra disequilibria permits only a short period of time between fluid addition and eruption. This requires rapid melt segregation, magma ascent by channelled flow and minimal residence time within the lithosphere. The evolution from basalt to basaltic andesite probably occurs rapidly during ascent or in magma reservoirs inferred from some geophysical data to lie within the lithospheric mantle. The flux across the Moho is broadly andesitic, and some magmas subsequently stall in more shallow crustal-level magma chambers, where they evolve to more differentiated compositions on time-scales of a few thousand years or less.

Origin of the mafic microgranular enclaves (MMEs) and their host granitoids from the Tagong pluton in Songpan-Ganze terrane: An igneous response to the closure of the Paleo-Tethys ocean

Science.gov (United States)

Chen, Qiong; Sun, Min; Zhao, Guochun; Yang, Fengli; Long, Xiaoping; Li, Jianhua; Wang, Jun; Yu, Yang

2017-10-01

The Songpan-Ganze terrane is mainly composed of a Triassic sedimentary sequence and late Triassic-Jurassic igneous rocks. A large number of plutons were emplaced as a result of tectono-magmatic activity related to the late stages of Paleo-Tethys ocean closure and ensuing collision. Granitoids and their hosted mafic enclaves can provide important constraints on the crust-mantle interaction and continental crustal growth. Mesozoic magmatism of Songpan-Ganze remains enigmatic with regard to their magma generation and geodynamic evolution. The Tagong pluton (209 Ma), in the eastern part of the Songpan-Ganze terrane, consists mainly of monzogranite and granodiorite with abundant coeval mafic microgranular enclaves (MMEs) (ca. 208-209 Ma). The pluton comprises I-type granitoid that possesses intermediate to acidic compositions (SiO2 = 61.6-65.8 wt.%), high potassium (K2O = 3.2-4.1 wt.%), and high Mg# (51-54). They are also characterized by arc-type enrichment of LREEs and LILEs, depletion of HFSEs (e.g. Nb, Ta, Ti) and moderate Eu depletions (Eu/Eu* = 0.46-0.63). Their evolved zircon Hf and whole-rock Nd isotopic compositions indicate that their precursor magmas were likely generated by melting of old lower continental crust. Comparatively, the MMEs have lower SiO2 (53.4-58.2 wt.%), higher Mg# (54-67) and show covariation of major and trace elements, coupled with field and petrographic observations, such as the disequilibrium textures of plagioclase and amphibole, indicating that the MMEs and host granitoids were originated from different magma sources but underwent mafic-felsic magma mixing process. Geochemical and isotopic data further suggest that the precursor magma of the MMEs was formed in the continental arc setting, mainly derived from an ancient metasomatized lithospheric mantle wedge. The Triassic granitoids from the Songpan-Ganze terrane show remarkable temporal-spatial-petrogenetic affinities to the counterparts of subduction zones in the Yidun and Kunlun arc

Geochemistry and petrogenesis of the Kolah-Ghazi granitoid assemblage, south of Esfahan

Directory of Open Access Journals (Sweden)

Jamshid Ahmadian

2018-04-01

, andalusite and sillimanite, the predominance of ilmenite, A/CNK values (A/CNK >1, and crondom contents (more than 3% in norm suggest that the Kolah-Ghazi plutonic assemblage can be classified as S-type granitoids. Moreover, all of the Kolah-Ghazi samples plot on the S-type field of the granite classification diagrams (Whalen et al., 1987; Chappell and White, 1992 which is in good agreement with mineralogical evidences. The sedimentary source, mostly shale and greywacke, can be suggested for Kolah-Ghazi melts according to the Rb/Sr vs. Rb/Ba diagram (Sylvester, 1998. Several discrimination diagrams such as Rb vs. Ta+Yb (Pearce et al., 1984 and R1-R2 (Batchelor and Bowden, 1985 were used to determine the tectonic setting of the Kolah-Ghazi granitoids. The Kolah-Ghazi samples lied between the fields of magmatic arc and syn-collisional granitoids in the discrimination diagrams. The geochemistry of the studied samples suggest a syntectonic environment for the Kolah-Ghazi granitoids which may be related to the late Cimmerian orogenic phase. References Batchelor, R.A. and Bowden, P., 1985. Petrogenetic interpretation of granitoid rock series using multicationic parameters. Chemical Geology, 48(1: 43–55. Chappell, B.W. and White, A.J.R., 1992. I- and S-type granites in the Lachlan Fold Belt. Transactions of the Royal Society of Edinburgh, Earth Sciences, 83: 1–2. Pearce, J.A., Harris, N.B.W. and Tindle, A.G., 1984. Trace Element Discrimination Diagrams for the Tectonic Interpretation of Granitic Rocks. Journal of Petrology, 25(4: 956–983. Sylvester, P.J., 1998. Post-collisional strongly peraluminous granites. Lithos, 45(1-4: 29–44. Whalen, J.B., Currie, K.L. and Chappell, B.W., 1987. A-type granites: geochemical characteristics, discrimination and petrogenesis. Contributions to Mineralogy and Petrology, 95(4: 407–419.

Petrology of Oligocene Ghaleh Yaghmesh granitoids in the west of Yazd province

Directory of Open Access Journals (Sweden)

Bahareh Fazeli

2017-02-01

calculation of amphibole minerals by Cameca SX50 microprobe device at the Oklahomacity University (Norman - USA. Results The studied plutonic rocks are dominated by plagioclase, orthoclase, quartz, amphibole (magnesio hornblende and actinolite hornblende, biotite, and pyroxene. Zircon, apatite, sphene, tourmaline and opaque minerals as the common accessory and chlorite, epidote and calcite are the secondary minerals. On the base of petrographic observation as well as mineral-chemistry and geochemical data, the granitoid massif is classified as I-type (magnetite series, calc – alkaline and metaluminous composition. The rocks under discussion are characterized by the high level of LILE (Ba, Sr, K and Cs and the negative anomaly of HFS elements (Ti, Nb, Zr and Y indicating the subduction related magmatism. The Ghaleh Yaghmesh granitoids are cogenetic and possibly developed in subduction zone related to active continental margin calc – alkaline volcanic arcs. Mixing process of acidic and basic magmas is likely involved in generation of the rocks being studied. Discussion The parent magma probably formed by partial melting of amphibolites with some sedimentary materials. Fractional crystallization of melt in the higher levels of crust gave rise to various rock types. Mantle – derived basaltic magmas emplaced into the lower crust most likely provide heat for partial melting Clemens et al., 2011(. Field evidences such as the presence of mafic microgranular enclaves having sharp boundaries with the host rocks (Zorpi et al., 1989; Didier, 1991, petrographic observations (similar mineralogy of MME and the host rock (Didier, 1991; Didier and Barbarin, 1991, the occurrence of accicular apatite (Zorpi et al., 1989; Didier, 1991, the corroded margin of amphibole and plagioclase (Zorpi et al., 1989; Shelley, 1993 and the abundance of biotite and hornblende in MME compared to the host rock (Ellis and Thompson, 1986 and geochemical criteria (range of silica from 51.35 to 70.78 indicate

Magmatic dyke swarms of the south shetland islands volcanic arc, west-antarctica - tracers of geodynamic history

Science.gov (United States)

Kraus, St.; Miller, H.

2003-04-01

Magmatic dykes are essential components of volcanic arcs, following joint systems and fracture zones. This work aims to reconstruct the deformational and intrusive history of the northern part of the Antarctic Peninsula by combining structural information with the geochemistry, isotopy and age of the dykes. On the South Shetland Islands volcanic activity began about 130 Ma ago. From Mid to Late Eocene (49-34 Ma) the northern Antarctic Peninsula and southern South America underwent extensional tectonics, which led to sea-floor spreading in the Drake Passage 28 Ma ago. Subsequent slab-rollback caused arc-extension and the opening of the Bransfield Rift as a backarc-basin between 4 and 1.3 Ma ago. Very slow subduction (1mm/a) at the South Shetland trench continues until the present day. Several changes of subduction direction caused crucial variations regarding the tectonic regime in the overlying South Shetland block, being the reason for the shifting strike of the dykes. Several dyke systems were mapped in areas of up to 100000m2, with the outcrop situation being good enough to observe plenty of relative age relationships. ICP-MS geochemical analysis on 132 dykes shows, as expected, that the majority of them correspond to a typical subduction-related calcalcalic suite, ranging from basalts to rhyolites. Nevertheless, some dykes show shoshonitic characteristics and are maybe related to an early stage extensional crustal regime. This is supported by the relative ages observed in the field, indicating, that these dykes belong to the oldest ones outcropping in the investigated area. In one case, the geochemical behaviour of the dyke corresponds clearly to adacitic conditions, being a hint on partially molten subducted oceanic crust. In several areas (e.g. Potter Peninsula, King George Island, and Hurd Peninsula, Livingston Island) a strong correlation between chemism and strike of the dykes - and therefore the tectonic regime at the time of intrusion - is observed. Ce

Paleozoic subduction complex and Paleozoic-Mesozoic island-arc volcano-plutonic assemblages in the northern Sierra terrane

Science.gov (United States)

Hanson, Richard E.; Girty, Gary H.; Harwood, David S.; Schweickert, Richard A.

2000-01-01

This field trip provides an overview of the stratigraphic and structural evolution of the northern Sierra terrane, which forms a significant part of the wall rocks on the western side of the later Mesozoic Sierra Nevada batholith in California. The terrane consists of a pre-Late Devonian subduction complex (Shoo Fly Complex) overlain by submarine arc-related deposits that record the evolution of three separate island-arc systems in the Late Sevonian-Early Mississippian, Permian, and Late Triassic-Jurassic. The two Paleozoic are packages and the underlying Shoo Fly Complex have an important bearing on plate-tectonic processes affecting the convergent margin outboard of the Paleozoic Cordilleran miogeocline, although their original paleogeographic relations to North America are controversial. The third arc package represents an overlap assemblage that ties the terrane to North America by the Late Triassic and helps constrain the nature and timing of Mesozoic orogenesis. Several of the field-trip stops examine the record of pre-Late Devonian subduction contained in the Shoo Fly Complex, as well as the paleovolcanology of the overlying Devonian to Jurassic arc rocks. Excellent glaciated exposures provide the opportunity to study a cross section through a tilted Devonian volcano-plutonic association. Additional stops focus on plutonic rocks emplaced during the Middle Jurassic arc magmatism in the terrane, and during the main pulse of Cretaceous magmatism in the Sierra Nevada batholith to the east.

Characterising the continental crust factory: new insights into the roots of an island arc from Hf isotopes in rutile (Kohistan complex, Pakistan)

Science.gov (United States)

Ewing, Tanya; Müntener, Othmar; Schaltegger, Urs

2017-04-01

Island arcs are one of the primary sites of generation of new continental crust. As such, a question of fundamental importance to models of continental growth is to what extent island arc magmas are strictly juvenile melts derived directly from the mantle, versus potentially incorporating a significant recycled continental component, for example from subducted sediment. The Kohistan complex (northeastern Pakistan) preserves a remarkably complete ˜50 km thick cross-section through an exhumed Jurassic-Cretaceous island arc. It affords a rare opportunity to study the evolution of island arc magmatism from subduction initiation, through intra-oceanic subduction, to arc-continent collision. In this study, we investigate the ultramafic-mafic Jijal Complex, which preserves part of the plutonic roots of the Kohistan complex formed over ˜20 Ma of intra-oceanic subduction. The Jijal Complex is volumetrically dominated by ultramafic rocks and garnet-bearing gabbros whose petrogenesis is controversial. Garnet formation has variously been attributed a prograde metamorphic origin1, a magmatic origin recording crystallisation at high pressures2,3, or a restitic origin following partial melting4. We have characterised the source of the Jijal Complex using in situ LA-MC-ICPMS determination of the Hf isotope composition of rutile from garnet gabbros, which are zircon-free. This work exploits the superior sensitivity of the Neptune Plus, coupled with an improved analytical protocol, to improve precision of this novel technique and permit in situ analysis of rutile with only ˜10-30 ppm Hf. Rutile occurs included in early-formed minerals such as clinopyroxene and garnet, indicating crystallisation at high pressures and temperatures. Rutile from all samples, collected across ˜3 km of former crustal depth, has indistinguishable Hf isotope compositions close to depleted mantle values. Integrating the new Hf isotope data for rutile with previously published whole rock Nd-Sr isotope

Distribution of natural radioactive elements in Western Carpathians granitoids

International Nuclear Information System (INIS)

Katlovsky, V.

1979-01-01

The content of natural radioactive elements was determined using the 1024-channel analyser NTA-512 B with NaI(Tl) scintillators or with a Ge(Li) detector. The following groups of samples were processed: 1. granitoids, pegmatites and weathered rocks in the Small Carpathians; 2. acid magmatites of exotic rocks of the klippen zone; 3. granitoids of the Western Carpathians. The results of the measurements are summed up. (Ha)

Back-arc with frontal-arc component origin of Triassic Karmutsen basalt, British Columbia, Canada

Science.gov (United States)

Barker, F.; Sutherland, Brown A.; Budahn, J.R.; Plafker, G.

1989-01-01

The largely basaltic, ???4.5-6.2-km-thick, Middle to Upper Triassic Karmutsen Formation is a prominent part of the Wrangellian sequence. Twelve analyses of major and minor elements of representative samples of pillowed and massive basalt flows and sills from Queen Charlotte and Vancouver Islands are ferrotholeiites that show a range of 10.2-3.8% MgO (as normalized, H2O- and CO2-free) and related increases in TiO2 (1.0-2.5%), Zr (43-147 ppm) and Nb (5-16 ppm). Other elemental abundances are not related simply to MgO: distinct groupings are evident in Al2O3, Na2O and Cr, but considerable scatter is present in FeO* (FeO + 0.9Fe2O3) and CaO. Some of the variation is attributed to alteration during low-rank metamorphism or by seawater - including variation of Ba, Rb, Sr and Cu, but high-field-strength elements (Sc, Ti, Y, Zr and Nb) as well as Cr, Ni, Cu and rare-earth elements (REE's) were relatively immobile. REE's show chondrite-normalized patterns ranging from light-REE depleted to moderately light-REE enriched. On eleven discriminant plots these analyses fall largely into or across fields of within-plate basalt (WIP), normal or enriched mid-ocean-ridge tholeiite (MORB) and island-arc tholeiite (IAT). Karmutsen basalts are chemically identical to the stratigraphically equivalent Nikolai Greenstone of southern Alaska and Yukon Territory. These data and the fact that the Karmutsen rests on Sicker Group island-arc rocks of Paleozoic age suggest to us that: 1. (1) the basal arc, after minor carbonate-shale deposition, underwent near-axial back-arc rifting (as, e.g., the Mariana arc rifted at different times); 2. (2) the Karmutsen basalts were erupted along this rift or basin as "arc-rift" tholeiitite; and 3. (3) after subsequent deposition of carbonates and other rocks, and Jurassic magmatism, a large fragment of this basalt-sediment-covered island arc was accreted to North America as Wrangellia. The major- and minor-elemental abundances of Karmutsen basalt is modeled

The age of Male Karpaty Mts. granitoid rocks determined by Rb-Sr isochrone method

International Nuclear Information System (INIS)

Badgasaryan, G.P.; Gukasyan, R.Kh.; Veselsky, J.

1982-01-01

The results are presented of nuclear geochronological datings of Male Karpaty Mts. granitoids by Rb-Sr isochrone method. Using the method the age of Bratislava massif granitoids was established to be 347+-4 mil. y. at ( 87 Sr/ 86 Sr)=0.7076+-0.0013 and the age of Modra massif granitoids to be 324+-18 mil. y. at ( 87 Sr/ 86 Sr)=0.7075+-0.00032 (2σ). The relative agreement of age of both massifs as well as the agreement of the primary ratio ( 87 Sr/ 86 Sr) 0 not only testifies to their continuity in age but also in genesis. The same relations also confirm the genetic dependence of pegmatites and leucocratic granitoids on fundamental types of granitoids building up the Bratislava and Modra massifs. (author)

DURATION OF GRANITOID MAGMATISM IN PERIPHERAL PARTS OF LARGE IGNEOUS PROVINCES (BASED ON 40AR/39AR ISOTOPIC STUDIES OF ALTAI PERMIAN-TRIASSIC GRANITOIDS

Directory of Open Access Journals (Sweden)

O. A. Gavryushkina

2017-01-01

Full Text Available In large igneous provinces (LIP of fold areas, granitoid rocks are dominant, while mantle-derivated rocks play a subordinate role in rock formation. If magma emissions are impulsive, it may take 25–30 million years for a LIP to form and take shape. In this paper, we present the results of 40Ar/39Ar isotopic studies of Permian-Triassic grani­toids in the Altai region, Russia, and clarify the evolution of this region located at the periphery of the Siberian LIP. These granitoids are very diverse and differ not only in their rock set, but also in the composition features. In the study region, the granodiorite-granite and granite-leucogranite association with the characteristics of I- and S-types as well rare metal ore-bearing leucogranites are observed along with gabbro- and syenite-granite series, including mafic and intermediate rocks with the A2-type geochemical features. The 40Ar/39Ar data obtained in our study suggest that most of the studied granitoids intruded within a short period of time, 254–247 Ma. This timeline is closely related to the formation of granitoids in theKuznetsk basin and dolerite dikes in the Terekta complex (251–248 and 255±5 Ma, respectively, as well as intrusions of lamproite and lamprophyre dikes of the Chuya complex (245–242 and 237–235 Ma. Thus, we conclude that the Altai Permian-Triassic granitoids are varied mainly due to the evolution of mafic magmatism.

Comparison of hydrothermal alteration patterns associated with porphyry Cu deposits hosted by granitoids and intermediate-mafic volcanic rocks, Kerman Magmatic Arc, Iran: Application of geological, mineralogical and remote sensing data

Science.gov (United States)

Yousefi, Seyyed Jabber; Ranjbar, Hojjatollah; Alirezaei, Saeed; Dargahi, Sara; Lentz, David R.

2018-06-01

The southern section of the Cenozoic Urumieh-Dokhtar Magmatic Arc (UDMA) of Iran, known as Kerman Magmatic Arc (KMA) or Kerman copper belt, is a major host to porphyry Cu ± Mo ± Au deposits, collectively known as PCDs. In this study, the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) data and spectral angle mapper (SAM) method, combined with field data, mineralogical studies, and spectral analysis are used to determine hydrothermal alteration patterns related to PCDs in the KMA. Gossans developed over some of these porphyry type deposits were mapped using Landsat 8 data. In the NKMA gossans are more developed than in the SKMA due to comparatively lower rate of erosion. The hydrothermal alteration pattern mapped by ASTER data were evaluated using mineralogical and spectral data. ASTER data proved to be useful for mapping the hydrothermal alteration in this semi-arid type of climate. Also Landsat 8 was useful for mapping the iron oxide minerals in the gossans that are associated with the porphyry copper deposits. Our multidisciplinary approach indicates that unlike the PCDs in the northern KMA that are associated with distinct and widespread propylitic alteration, those in the granitoid country rocks lack propylitic alteration or the alteration is only weakly and irregularly developed. The porphyry systems in southern KMA are further distinguished by development of quartz-rich phyllic alteration zones in the outer parts of the PCDs that could be mapped using remote sensing data. Consideration of variations in alteration patterns and specific alteration assemblages are critical in regional exploration for PCDs.

Cold-front driven storm erosion and overwash in the central part of the Isles Dernieres, a Louisiana barrier-island arc

Science.gov (United States)

Dingler, J.R.; Reiss, T.E.

1990-01-01

Tropical and extratropical storms produce significant erosion on the barrier islands of Louisiana. Over the past 100 years, such storms have produced at least 2 km of northward beach-face retreat and the loss of 63% of the surface area of the Isles Dernieres, a low-lying barrier-island arc along the central Louisiana coast. Elevations on the islands within the arc are typically less than 2 m above mean sea level. The islands typically have a washover-flat topography with occasional, poorly developed, dune-terrace topography consisting of low-lying and broken dunes. The central part of the arc consists of salt-marsh deposits overlain by washover sands along the Gulf of Mexico shoreline. Sand thicknesses range from zero behind the beach, to less than 2 m under the berm crest, and back to zero in the first nearshore trough. The sand veneer is sufficiently thin that storms can strip all the sand from the beach face, exposing the underlying marsh deposits. The geomorphic changes produced by cold fronts, a type of extratropical storm that commonly affect the Isles Dernieres between late fall and early spring are described. Between August 1986 and September 1987, repeated surveys along eleven shore-normal transects that covered 400 m of shoreline revealed the timing and extent of cold-front-produced beach change along a typical section of the central Isles Dernieres. During the study period, the beach face retreated approximately 20 m during the cold-front season but did not rebuild during the subsequent summer. Because the volume of sand deposited on the backshore (5600 m3) was less than the volume of material lost from the beach face (19,200 m3), approximately 13,600 m3 of material disappeared. Assuming that underlying marsh deposits decrease in volume in direct proportion to the amount of beach-face retreat, an estimate of the mud loss during the study period is 14,000 m3. Thus, the decrease in volume along the profiles can be accounted for without removing any sand

Crustal basement controls granitoid magmatism, and implications for generation of continental crust in subduction zones: A Sr-Nd-Hf-O isotopic study from the Paleozoic Tongbai orogen, central China

Science.gov (United States)

Wang, Hao; Wu, Yuan-Bao; Yang, Jin-Hui; Qin, Zheng-Wei; Duan, Rui-Chun; Zhou, Lian; Yang, Sai-Hong

2017-06-01

Ascertaining the petrogenesis of granitoid rocks in subduction zones holds the key for understanding the processes of how continental crust is produced. The synchronous Taoyuan and Huanggang plutons occur in two different geological units of the Paleozoic Tongbai orogen of central China. They provide an optimal opportunity for a study to address the role of the crustal basement in generating voluminous granitoid magmatism in subduction zones. The Taoyuan and Huanggang plutons have identical U-Pb zircon crystallization ages of 440-444 Ma, which are temporally related to northward subduction of the Paleotethyan Ocean. The Taoyuan samples show high SiO2 (73.36-79.16%) and low Al2O3 (12.00-13.45%) contents, Mg numbers (20.6-38.2), and Sr/Y (2.04-10.1) and (La/Yb)N (2.34-7.32) ratios with negative Eu anomalies (Eu/Eu* = 0.33-0.93). They yielded positive εNd(t) (+ 3.0 to + 6.7) and εHf(t) (+ 11.8 to + 13.2) values, elevated initial Sr isotopic ratios (0.7040-0.7057) and relatively low zircon δ18O values of 4.62-5.39‰. These suggest that they were produced through partial melting of hydrothermally altered lower crust of the accreted Erlangping oceanic arc. In contrast, the Huanggang samples exhibit variable whole-rock geochemical and isotopic compositions with SiO2 contents of 57.01-64.42 wt.%, initial Sr isotopic ratios of 0.7065-0.7078, and εNd(t) values of - 5.7 to - 9.4. Additionally, they have high zircon δ18O values of 7.57-8.45‰ and strongly negative zircon εHf(t) values of - 14.4 to - 10.5. They were suggested to have been mainly derived from ancient continental crust of the Kuanping crustal unit with the addition of 20-40% juvenile, mantle-derived material. Accordingly, the granitoids in both oceanic and continental arcs are likely to be mainly derived from intracrustal melting of their crustal basement. It is revealed by the Huanggang pluton that little net continental crust growth occurs in continental arcs, and addition of new volume of continental

Diagenesis of arc-derived sandstones of Cretaceous formations in the Queen Charlotte Islands, British Columbia, Canada(MEMORIAL VOLUME TO THE LATE PROFESSOR TERUHIKO SAMESHIMA)

OpenAIRE

Yagishita, Koji

1994-01-01

Diagenesis of sediments derived from a magmatic arc provenance may greatly differ from that of sediments derived from an intracratonic- or foreland-type provenance. Sediments from the magmatic arc are compositionally immature and rich in volcanic and sedimentary rock fragments. Sandstone samples of mid- to Upper Cretaceous formations in the Queen Charlotte Islands, British Columbia, Canada, contain either large amounts of pseudomatrix or authigenic cements. An inverse relationship between the...

Rb-Sr isochrone dating of granitoids from Tribec Mts

International Nuclear Information System (INIS)

Bagdasaryan, G.P.; Gukasyan, R.Kh.; Cambel, B.; Broska, I.

1990-01-01

The results of Rb-Sr isochrone dating of granitoids from the Tribec-Zobor crystalline complex region are presented. Whole-rock Rb-Sr isochrone indicates an age of 352±5 m.y., the initial ratio being ( 87 Sr/ 86 Sr) 0 =0.70582±0.00008, which approaches the hitherto published initial ratios from the Tatric-Veporide part of the crystalline complex. This indicates a common source of granitoid rocks over the entire region studied. (author). 2 figs., 1 tab., 15 refs

U-Series disequilibria, magma petrogenesis and flux rates along the depleted Tonga-Kermadec Island Arc

International Nuclear Information System (INIS)

Turner, S.; Hawkesworth, C.; Rogers, N.; Bartlett, J.; Smith, I.; Worthington, T.; Smith, I.; Worthington, T.

1997-01-01

The fluid contribution to the lava source has been calculated as -1 ppm Rb, 10 ppm Ba, 0.02 ppm U, 600 ppm K 0.2 ppm Pb and 30 ppm Sr. It has 87 Sr/ 86 Sr = 0.7035 and 206 Pb/ 204 Pb = 18.5 and thus is inferred to be derived from dehydration of the subducting altered oceanic crust. U-Th isotope disequilibria reflect the time since fluid release from the subducting slab and a pseudo-isochron through the lowest ( 230 Th/ 232 Th) lavas constrains this to be ∼ 50 000 yr. Significantly, U-Th isotope data record similar timescales in the Lesser Antilles (∼40 000 yr, Turner et al., 1996) and in the Marianas (30 000 yr, Elliott et al., 1996) which provides encouragement that these data reflect some general aspect of the flux rates beneath island arcs. Large 226 Ra excesses have also been reported from Tonga-Kermadec (( 226 Ra/ 230 Th) = 1.5-3.0, Gill and Williams, 1990). Since 226 Ra will return to secular equilibrium with 230 Th (( 226 Ra/ 230 Th) = 1) within 7500 yr of Ra/Th fractionation the 238 U/ 230 Th and 226 Ra/ 230 Th disequilibria are clearly decoupled (see also Turner et al., 1996). This is an unexpected result and clearly the 226 Ra/ 230 Th disequilibria must have developed after the process responsible for the major U/Th fractionation. It is suggested that Th-Ra isotope disequilibria record the time since partial melting and thus indicate rapid channelled magma ascent. Olivine gabbro xenoliths from Raoul are interpreted as cumulates to their host lavas with which they form zero age U-Th isochrons indicating that minimal time was spent in magma chambers. The subduction signature is not observed in lavas from the back arc island of Niuafo'ou and thus does not penetrate as far 200 km beyond the arc front volcanoes. These were derived from partial melting of fertile peridotite at 130-160 km depth with melt rates around 2 x 10 -4 kg m -3 yr -1 , possibly due to volatiles released from the breakdown of phengite and lawsonite in the underlying slab at 200 km

Effects of relative plate motion on the deep structure and penetration depth of slabs below the Izu-Bonin and Mariana island arcs

NARCIS (Netherlands)

Hilst, R.D. van der; Seno, Tetsuzo

1993-01-01

An increasing number of seismological studies indicate that slabs of subducted lithosphere penetrate the Earth's lower mantle below some island arcs but are deflected, or, rather, laid down, in the transition zone below others. Recent numerical simulations of mantle flow also advocate a hybrid form

Petrography, geochemistry and tectonic setting of Rigi granitoid body (east of Lut Block, Central Iran)

International Nuclear Information System (INIS)

Ghonjalipour, R.; Biabangard, H.; Ahmadi, A.

2016-01-01

The Rigi Granitoid Mountain is located in 5 Km West of Dehsalm and 85 Km West of Nehbandan city, southeast of Birjand province and east of Lut Block. This granitoid with Eocene-Oligocene age was penetrated into sedimentary rocks (shale, limestone and sandstone) and changes theses rocks to skarn, hornfels and calcsilicate rocks. This granitoid consist of granodiorite, quartz monzonite and syenogranite with plagioclase, orthose, biotite, hornblende and quartz minerals. Sericite, chlorite, and Magnetite are secondary mineral in these rocks. Geochemical properties this pluton showes that it subalkaline and has metaluminous. Geochemical diagrams and presence of hornblende mineral in this pluton shows that belong to I-type granite. The rocks in granitoid pluton are enrichment LREE compare to HREE, high contents of LILE relative to HFSE and negative anomalies of Nb, Ti and P show it granitoid related to subduction zone. Also, tectonomagmatic diagrams improve that this pluton has belong to active continental margin.

Petrogenesis of shoshonitic granitoids, eastern India: Implications for the late Grenvillian post-collisional magmatism

Directory of Open Access Journals (Sweden)

B. Goswami

2014-11-01

Full Text Available Many elongated, lenticular plutons of porphyritic granitoids are distributed mainly near the southern and northern margin of the Chhotanagpur Gneissic Complex (CGC which belongs to the EW to ENE–WSW tending 1500 km long Proterozoic orogenic belt amalgamating the North and South Indian cratonic blocks. The late Grenvillian (1071 ± 64 Ma Raghunathpur porphyritic granitoid gneiss (PGG batholith comprising alkali feldspar granite, granite, granodiorite, tonalite, quartz syenite and quartz monzonite intruded into the granitoid gneisses of southeastern part of CGC in the Purulia district, West Bengal and is aligned with ENE–WSW trending North Purulia shear zone. Mineral chemistry, geochemistry, physical condition of crystallization and petrogenetic model of Raghunathpur PGG have been discussed for the first time. The petrographic and geochemical features (including major and trace-elements, mineral chemistry and 87Sr/86Sr ratio suggest these granitoids to be classified as the shoshonitic type. Raghunathpur batholith was emplaced at around 800 °C and at 6 kbar pressure tectonic discrimination diagrams reveal a post-collision tectonic setting while structural studies reveal its emplacement in the extensional fissure of North Purulia shear zone. The Raghunathpur granitoid is compared with some similar granitoids of Europe and China to draw its petrogenetic model. Hybridization of mantle-generated enriched mafic magma and crustal magma at lower crust and later fractional crystallization is proposed for the petrogenesis of this PGG. Mafic magma generated in a post-collisional extension possibly because of delamination of subducting slab. Raghunathpur batholith had emplaced in the CGC during the final amalgamation (∼1.0 Ga of the North and South Indian cratonic blocks. Granitoid magma, after its generation at depth, was transported to its present level along megadyke channel, ways within shear zones.

Albari granodiorite - a typical calcalkaline diapir of volcanic arc stage from the Arabian Shield

Science.gov (United States)

Radain, Abdulaziz A.

Granodiorite rocks of the Arabian Shield are generally considered to be collision-related granitoids. However, there are some granodiorites that were formed during the volcanic arc stage. Major and trace elements studies are carried out on Albari diapiric granodiorite to reveal its tectonic environment. This intrusive rock type is common in the Taif arc province (Mahd adh Dhahab quadrangle) of the Asir microplate near the border of the southeast dipping subduction zone that ended up with arc-arc collision (Asir-Hijaz microplates) along the now known Bir Umq suture zone. The granodiorite exhibits a calcalkaline trend on ternary AFM and K 2ONa 2OCaO diagrams. Tectonic discrimination diagrams using multicationic parameters (R1 = 4Sill(Na+K)2(Fe+Ti); R2 = 6Ca+2Mg+Al), SiO 2-trace elements (Nb, Y, Rb), and Y versus Nb and Rb versus (Y+Nb) indicate a destructive active plate margin or volcanic arc stage tectonic environment. Albari calcalkaline granodiorite might have been derived directly from partial melting of subducted oceanic crust or overlying mantle contaminated with variable amounts of intermediate (quartz diorite, diorite, tonalite, trondhjemite) early and late volcanic arc-related plutonic country rocks.

Record of Permian-Early Triassic continental arc magmatism in the western margin of the Jiamusi Block, NE China: petrogenesis and implications for Paleo-Pacific subduction

Science.gov (United States)

Yang, Hao; Ge, Wenchun; Dong, Yu; Bi, Junhui; Wang, Zhihui; Ji, Zheng; Yang, H.; Ge, W. C.; Dong, Y.; Bi, J. H.; Wang, Z. H.; Ji, Z.

2017-09-01

In this paper, we report zircon U-Pb ages, Hf isotopes and whole-rock geochemical data for the Permian to Early Triassic granitoids from the western margin of the Jiamusi Block (WJB), NE China. The intermediate to felsic (SiO2 = 59.67-74.04 wt%) granitoids belong to calc-alkaline series and are characterized by enrichments in light rare earth elements and large ion lithophile elements with pronounced negative Nb, Ta and Ti anomalies, revealing typical continental magmatic arc geochemical signatures. The zircon U-Pb determinations on the granodiorite, monzogranite, syenogranite and quartz diorite samples yielded ages between ca. 275-245 Ma, which, together with the published coeval intrusive rocks, indicates that Permian to Early Triassic continental arc magmatism occurred extensively in the WJB. The low and mainly negative zircon ɛ Hf( t) values between -7.6 and +1.6 and the zircon Hf model ages of 1.2-1.8 Ga, which are significantly older than their crystallization ages, suggest that they were mainly derived from reworking of ancient crustal materials with a limited input of juvenile components. The geochemical systematics and petrogenetic considerations indicate that the studied granitoids were generated from a zone of melting, assimilation, storage, and homogenization, i.e., a MASHed zone at the base of Paleo- to Mesoproterozoic continental crust, where large portions of igneous rocks and minor clay-poor sediments involved in the source region. In combination with regional geological data, we argue that the Jiamusi Block was unlikely the rifted segment of the Songliao Block and two possible geodynamical models were proposed to interpret the formation of the ca. 275-245 Ma granitoids in the WJB. In the context of Permian global plate reconstruction, we suggest that Paleo-Pacific plate subduction was initiated in the Permian to Early Triassic beneath the Jiamusi Block, and even whole eastern NE China.

Oxidation state inherited from the magma source and implications for mineralization: Late Jurassic to Early Cretaceous granitoids, Central Lhasa subterrane, Tibet

Science.gov (United States)

Cao, MingJian; Qin, KeZhang; Li, GuangMing; Evans, Noreen J.; McInnes, Brent I. A.; Li, JinXiang; Zhao, JunXing

2018-03-01

Arc magmas are more oxidized than mid-ocean ridge basalts; however, there is continuing debate as to whether this higher oxidation state is inherited from the source magma or developed during late-stage magmatic differentiation processes. Well-constrained Late Jurassic to Early Cretaceous arc-related intermediate to felsic rocks derived from distinct magma sources provide us with a good opportunity to resolve this enigma. A series of granitoids from the western Central Lhasa subterrane were analyzed for whole-rock magnetic susceptibility, Fe2O3/FeO ratios, and trace elements in zircon. Compared to Late Jurassic samples (1.8 ± 2.0 × 10-4 emu g-1 oe-1, Fe3+/Fetotal = 0.32 ± 0.07, zircon Ce4+/Ce3+* = 15.0 ± 13.4), Early Cretaceous rocks show higher whole-rock magnetic susceptibility (5.8 ± 2.5 × 10-4 emu g-1 oe-1), Fe3+/Fetotal ratios (0.43 ± 0.04), and zircon Ce4+/Ce3+* values (23.9 ± 22.3). In addition, positive correlations among whole-rock magnetic susceptibility, Fe3+/Fetotal ratios, and zircon Ce4+/Ce3+* reveal a slight increase in oxidation state from fO2 = QFM to NNO in the Late Jurassic to fO2 = ˜NNO in the Early Cretaceous. Obvious linear correlation between oxidation indices (whole-rock magnetic susceptibility, zircon Ce4+/Ce3+*) and source signatures (zircon ɛHf(t), TDM C ages) indicates that the oxidation state was predominantly inherited from the source with only a minor contribution from magmatic differentiation. Thus, the sources for both the Late Jurassic and Early Cretaceous rocks were probably influenced by mantle wedge-derived magma, contributing to the increased fO2. Compared to ore-forming rocks at giant porphyry Cu deposits, the relatively low oxidation state (QFM to NNO) and negative ɛHf(t) (-16 to 0) of the studied granitoids implies relative infertility. However, this study demonstrates two potential fast and effective indices ( fO2 and ɛHf(t)) to evaluate the fertility of granitoids for porphyry-style mineralization. In an

Interaction between felsic granitoids and basic dykes in ...

Indian Academy of Sciences (India)

37

Many workers gave detailed petrographical and geochemical data of the ... greenstone complex (Malviya et al., 2006; Kumar et al., 2013; Singh and ...... Mafic rock shows lobate shape pointing towards granitoids (marked by the white arrows);.

Constraints on the source of Cu in a submarine magmatic-hydrothermal system, Brothers volcano, Kermadec island arc

Science.gov (United States)

Keith, Manuel; Haase, Karsten M.; Klemd, Reiner; Smith, Daniel J.; Schwarz-Schampera, Ulrich; Bach, Wolfgang

2018-05-01

Most magmatic-hydrothermal Cu deposits are genetically linked to arc magmas. However, most continental or oceanic arc magmas are barren, and hence new methods have to be developed to distinguish between barren and mineralised arc systems. Source composition, melting conditions, the timing of S saturation and an initial chalcophile element-enrichment represent important parameters that control the potential of a subduction setting to host an economically valuable deposit. Brothers volcano in the Kermadec island arc is one of the best-studied examples of arc-related submarine magmatic-hydrothermal activity. This study, for the first time, compares the chemical and mineralogical composition of the Brothers seafloor massive sulphides and the associated dacitic to rhyolitic lavas that host the hydrothermal system. Incompatible trace element ratios, such as La/Sm and Ce/Pb, indicate that the basaltic melts from L'Esperance volcano may represent a parental analogue to the more evolved Brothers lavas. Copper-rich magmatic sulphides (Cu > 2 wt%) identified in fresh volcanic glass and phenocryst phases, such as clinopyroxene, plagioclase and Fe-Ti oxide suggest that the surrounding lavas that host the Brothers hydrothermal system represent a potential Cu source for the sulphide ores at the seafloor. Thermodynamic calculations reveal that the Brothers melts reached volatile saturation during their evolution. Melt inclusion data and the occurrence of sulphides along vesicle margins indicate that an exsolving volatile phase extracted Cu from the silicate melt and probably contributed it to the overlying hydrothermal system. Hence, the formation of the Cu-rich seafloor massive sulphides (up to 35.6 wt%) is probably due to the contribution of Cu from a bimodal source including wall rock leaching and magmatic degassing, in a mineralisation style that is hybrid between Cyprus-type volcanic-hosted massive sulphide and subaerial epithermal-porphyry deposits.

Granitoids of South Korea and Southwest Japan. Trace element evidence regarding their differentiation

International Nuclear Information System (INIS)

Tsusue, Akio; Mizuta, Toshio; Tamai, Tadaharu.

1994-01-01

Although we have already published our trace element data for granitoids of South Korea and Southwest Japan, and we have interpreted REE patterns and Ba, Rb and Sr relationships of the granitoids (Tsusue et al., 1986, 1987a, 1987b, 1988), we intend to review briefly the trace element data of South Korea and Southwest Japan in this report. (J.P.N.)

Monitoring the Sumatra volcanic arc with InSAR

Science.gov (United States)

Chaussard, E.; Hong, S.; Amelung, F.

2009-12-01

The Sumatra volcanic arc is the result of the subduction of the Indo-Australian plate under the Sunda plate. The arc consists of 35 known volcanic centers, subaerials on the west coast of the Sumatra and Andaman Islands and submarines between these islands. Six active centers are known in the Sumatra volcanic arc. Surface deformation in volcanic areas usually indicates movement of magma or hydrothermal fluids at depth. Here we present a satellite-based Interferometric synthetic aperture radar (InSAR) survey of the Sumatra volcanic arc using ALOS data. Spanning the years 2007 to beginning of 2009, our survey reveals the background level of activity of the 35 volcanoes. We processed data from 40 tracks (24 in descending orbit and 16 in ascending orbit) to cover the whole Sumatra arc. In the first results five of these six known active centers show no sign of activity: Dempo, Kaba, Marapi, Talang and Peuet. The remaining active volcano, Mount Kerinci, has an ambiguous signal. We used pair-wise logic and InSAR time series of the available ALOS data to determine if the observed InSAR signal is caused by ground deformation or by atmospheric delays.

Gold contents of sulfide minerals in granitoids from southwestern New Brunswick, Canada

Science.gov (United States)

Yang, Xue-Ming; Lentz, David R.; Sylvester, Paul J.

2006-07-01

The abundance of gold and selected trace elements in magmatic sulfide and rock-forming minerals from Silurian-Devonian granitoids in southwestern New Brunswick were quantitatively analyzed by laser-ablation inductively coupled plasma mass-spectrometry. Gold is mainly hosted in sulfide minerals (i.e., chalcopyrite, pyrrhotite, and pyrite), in some cases perhaps as submicron inclusions (nanonuggets). Gold is below detection (caca % qGTbGaaeyzaiaabYgacaqG0baaaOGaeyypa0JaaGymaiaaiwdacaaI % WaGaeyySaeRaaGioaiaaiodacaGGSaGaaeiiaiaabggacaqGUbGaae % izaiaabccacaWGebWaa0baaSqaaiaabgeacaqG1baabaGaaeiCaiaa % bMhacaqGVaGaaeyBaiaabwgacaqGSbGaaeiDaaaakiabg2da9iaaio % dacaaI2aGaaGOmaiabgglaXkaaiMdacaaI2aaaaa!6E8F! D^{{{text{cpy/melt}}}}_{{{text{Au}}}}= 948 ± 269,{text{ }}D^{{{text{po/melt}}}}_{{{text{Au}}}} = 150 ± 83,{text{ and }}D^{{{text{py/melt}}}}_{{{text{Au}}}} = 362 ± 96. This result suggests that gold behavior in the granitoid systems is controlled by the conditions of sulfur saturation during magmatic evolution; the threshold of physiochemical conditions for sulfur saturation in the melts is a key factor affecting gold activity. Gold behaves incompatibly prior to the formation of sulfide liquids or minerals, but it becomes compatible at their appearance. Gold would be enriched in sulfur-undersaturated granitoid magmas during fractionation, partitioning into evolved magmatic fluids and favoring the formation of intrusion-related gold deposits. However, gold becomes depleted in residual melts if these melts become sulfur-saturated during differentiation, leading to gold precipitation in the early sulfide phases of a granitoid suite. Late-stage Cl-bearing magmatic-hydrothermal fluids with low pH and relatively high oxidation state derived from either progressively cooling magmas at depth or convective circulation of meteoric water buffered by reduced carbon-bearing sediments, may scavenge gold from early sulfide minerals. If a significant amount of gold produced in this

Cyclic formation and stabilization of Archean lithosphere by accretionary orogenesis: Constraints from TTG and potassic granitoids, North China Craton

Science.gov (United States)

Wang, Wei; Cawood, Peter A.; Liu, Shuwen; Guo, Rongrong; Bai, Xiang; Wang, Kang

2017-09-01

Accretionary orogens are major sites of modern continental growth, yet their role in the development of Archean continental crust remains enigmatic. Diverse granitoid suites from tonalite-trondhjemite-granodiorite (TTG) to potassic granitoids appeared during late Archean, representing a period of major continental formation and stabilization. In this study, whole-rock geochemical and zircon U-Pb and Lu-Hf isotopic data are reported for Neoarchean granitoid gneisses from the Northern Liaoning Terrane, northeastern North China Craton (NCC). Older granitoid gneisses ( 2592-2537 Ma) define three magmatic zones migrating from southeast to northwest, each showing a common magmatic evolution from high-pressure TTGs to medium-/low-pressure TTGs and potassic granitoids. They have depleted zircon ƐHf(t) of +0.5 to +8.7. Younger 2529-2503 Ma potassic granitoids and TTGs occur throughout the terrane, which are marked by variable zircon ƐHf(t) of -4.7 to +8.1, and are coeval with regional high-grade metamorphism. Petrogenetic modeling and changing Sr/Y and (La/Yb)N of the granitoids suggest that the crust experienced episodic thickening and thinning and became progressively evolved through development of potassic granitoids and sedimentary successions. The metavolcanic basement to the granitoids display tholeiitic to calc-alkaline affinities, together with the top-to-the-northwest thrusting and associated volcanogenic massive sulfide-type Cu-Zn deposits, suggesting cyclic crustal formation of Northern Liaoning within an accretionary orogen with a SE-dipping subduction polarity. Cyclic crustal thickening and thinning is related to tectonic switching from advancing to retreating relations between the downgoing and overriding plate. After 2530 Ma, this accretionary system accreted to the ancient continental nucleus of NCC (Anshan-Benxi Terrane), signifying final lithosphere stabilization.

Oxygen isotope regional pattern in granitoids from the Cachoeirinha Belt, northeast Brazil

International Nuclear Information System (INIS)

Sial, A.N.

1984-01-01

Four groups of granitoids are present within the Cachoeirinha belt and in the adjacent migmatitic basement, between 37 0 and 40 0 W long. and 7 0 and 8 0 15' S lat., States of Pernambuco and Paraiba: a) K 2 O - enriched, very porphyritic; b) a calc-alkalic slightly porphyritic group; c) group with trondjemitic affinities; and d) peralkalic group. Petrology and oxygen isotope geochemistry for over 100 samples from these groups were studied. Almost all plutons for which 5 or more samples were analyzed, exhibit a total range of gamma 18 O less than 2% o. A broad range of mean oxygen isotope composition is observed, varying from 6.93 to 12.79% o. There is a systematic regional trend in which the calc-alkalic granitoids (conceicao-type) found within the Cachoeirinha space are the most 18 O - enriched rocks (10.6 to 12.9% o) while the lowest mean gamma 18 O values (4.5 to 9.7% o) are found in the K 2 O - enriched granitoids (Itaporanga-type). Intermediate gamma 18 O values were recorded in the bodies with trondhjemitic affinities (8.9 to 9.8% o) which intruded metasediments of the Salgueiro Group and in the peralkalic granitoids of Catingueira (8.1 to 9.8% o) which intruded Cachoeirinha metamorphics. Among the potassic granitoids, mean gamma 18 O increases from Bodoco to Itaporanga (from west to east). As a whole, the W.R. gamma 18 O of these plutons correlate with the type of grade of metamorphism of the host rocks and, therefore, with the tectonic framework, increasing from those which intruded the gneiss-migmatites to those which intruded the low-grade metamorphics of the Cachoeirinha Group. The possible origin of each rock group is discussed in light of the oxygen isotope geochemistry. (Author) [pt

Late Paleozoic-Early Mesozoic tectonic evolution of the Paleo-Asian Ocean: geochronological and geochemical evidence from granitoids in the northern margin of Alxa, Western China

Science.gov (United States)

Sha, Xin; Wang, Jinrong; Chen, Wanfeng; Liu, Zheng; Zhai, Xinwei; Ma, Jinlong; Wang, Shuhua

2018-03-01

The Paleo-Asian Ocean (Southern Mongolian Ocean) ophiolitic belts and massive granitoids are exposed in the Alxa block, in response to oceanic subduction processes. In this work, we report petrographic, geochemical, and zircon U-Pb age data of some granitoid intrusions from the northern Alxa. Zircon U-Pb dating for the quartz diorite, tonalite, monzogranite, and biotite granite yielded weighted mean 206Pb/238U ages of 302±9.2 Ma, 246.5±4.6 Ma, 235±4.4 Ma, and 229.5±5.6 Ma, respectively. The quartz diorites ( 302 Ma) exhibit geochemical similarities to adakites, likely derived from partial melting of the initially subducted Chaganchulu back-arc oceanic slab. The tonalites ( 246.5 Ma) display geochemical affinities of I-type granites. They were probably derived by fractional crystallization of the modified lithospheric mantle-derived basaltic magmas in a volcanic arc setting. The monzogranites ( 235 Ma) are characterized by low Al2O3, but high Y and Yb with notably negative Eu anomalies. In contrast, the biotite granites ( 229.5 Ma) show high Al2O3 but low Y and Yb with steep HREE patterns and the absence of negative Eu anomalies. Elemental data suggested that the biotite granites were likely derived from a thickened lower crust, but the monzogranites originated from a thin crust. Our data suggested that the initial subduction of the Chaganchulu oceanic slab towards the Alxa block occurred at 302 Ma. This subduction process continued to the Early Triassic ( 246 Ma) and the basin was finally closed before the Middle Triassic ( 235 Ma). Subsequently, the break-off of the subducted slab triggered asthenosphere upwelling (240-230 Ma).

Geochemistry and Nd-Sr isotopic signatures of the Pensamiento Granitoid Complex, Rondonian-San Ignacio Province, eastern precambrian shield of Bolivia: petrogenetic constraints for a mesoproterozoic magmatic arc setting

International Nuclear Information System (INIS)

Matos, Ramiro; Teixeira, Wilson; Bettencourt, Jorge Silva; Geraldes, Mauro Cesar

2009-01-01

The Pensamiento Granitoid Complex (PGC), located in the northern part of the eastern Precambrian shield of Bolivia, is tectonically assigned to the Rondonian-San Ignacio Province (1.55 - 1.30 Ga) of the Amazonian Craton that is made up by Archean and Proterozoic provinces. The Proterozoic ones result from accretionary orogens that become successively younger south westwards, such as the Rondonian/San Ignacio (1.37 - 1.32 Ga) and the Sunsas orogenies (1.20 - 1.00 Ga). The PGC crops out mainly on the 'Paragua craton' bounded to the south by the Sunsas belt, and composed of granites and subvolcanic terms, and subordinately of syenites, granodiorites, tonalites, trondhjemites and diorites as orogenic representatives of the Rondonian/San Ignacio Orogeny, intrusive into the Lomas Maneches (ca. 1.68 Ga) and Chiquitania (ca. 1.7 Ga) complexes. Thirteen whole rock chemical analyses for major, trace and REE elements were performed for the La Junta, San Martin, Diamantina, Porvernir, San Cristobal, Piso Firme plutons of the PGC. The negative trends of MgO, Al 2 O 3 and CaO contents with increasing SiO 2 suggest that fractional crystallization played an important role in the petrogenesis of the investigated rocks. The data also indicate a mainly peraluminous, sub-alkaline to high-K calc-alkaline composition, and fractionated LREE/HREE patterns are consistent with a magmatic arc character for these plutons. SHRIMP U-Pb zircon ages of the La Junta and San Martin syn- to late-kinematic plutons are 1347 ± 21 Ma and 1373 ± 20 Ma respectively, and the Sm-Nd T DM model ages are between 1.9 to 2.0 Ga, while ε Nd(1330) values range from +1.8 to -4.3, respectively. In addition, the late- to post-kinematic Diamantina pluton yields SHRIMP U-Pb zircon age of 1340 ± 20 Ma, and variable Sm-Nd T DM model ages (1.6 to 1.9 Ga) and ε Nd(1330) values (+0.4 to -1.2) that are comparable with previous results found for other coeval plutons. The Porvenir, San Cristobal and Piso Firme plutons

Age of granitoids from the Kohut Veporic zone according to Rb-Sr isochrone analysis

International Nuclear Information System (INIS)

Cambel, B.; Bagdasaryan, G.P.; Gukasyan, R.K.; Dupej, J.

1988-01-01

Rb-Sr isochrone analyses of granitoid rocks from the southern part of the Veporic zone - the so-called Kohut zone - are presented. In this region, the Sinec (Rimavica) type of granitoids formerly considered to be Late Palaeozoic to Neoide, is found. The present isochrone research determines them as equivalents of granitoids of the Sihla type (387±27 m.y.). The Sinec (Rimavica) granite reaches an age of 392±5 m.y. This extended age must partly be attributed to additional processes which took place in the stage of retrograde alterations. The conclusions are of considerable importance in clarifying the metamorphic age and stratigraphy of the crystalline complex in the region of the southern Veporic zone. (author). 9 figs., 4 tabs., 38 refs

222Rn activity concentration differences in groundwaters of three Variscan granitoid massifs in the Sudetes (NE Bohemian Massif, SW Poland)

International Nuclear Information System (INIS)

Przylibski, Tadeusz A.; Gorecka, Joanna

2014-01-01

Based on research conducted in three Variscan granitoid massifs located within the crystalline Bohemian Massif, the authors confirmed that the higher the degree of their erosional dissection, the smaller the concentration of 222 Rn in groundwaters circulating in these massifs. This notion implies that radon waters and high-radon waters, from which at least some of the dissolved radon should be removed before feeding them as drinking water to the water-supply system, could be expected in granitoid massifs which have been poorly exposed by erosion. At the same time, such massifs must be taken into account as the areas of possible occurrence of radon medicinal waters, which in some countries can be used for balneotherapy in health resorts. Slightly eroded granitoid massifs should be also regarded as very probable radon prone areas or areas of high radon potential. - Highlights: • The concentration of 222 Rn in groundwater depends on the zone of the granitoid massif which is exposed on the ground surface. • The highest 222 Rn concentrations occur in the least eroded granitoid massifs, the lowest in massifs with exposed root parts. • The stronger the erosional dissection of a granitoid massif, the lower 222 Rn concentration in groundwaters in this massif. • Not all granitoid massifs are areas with groundwaters containing high concentrations of 222 Rn. • The least eroded granitoid massifs are radon prone areas with the occurrence of high-radon and radon groundwaters

Seismological Imaging of Melt Production Regions Beneath the Backarc Spreading Center and Volcanic Arc, Mariana Islands

Science.gov (United States)

Wiens, Douglas; Pozgay, Sara; Barklage, Mitchell; Pyle, Moira; Shiobara, Hajime; Sugioka, Hiroko

2010-05-01

We image the seismic velocity and attenuation structure of the mantle melt production regions associated with the Mariana Backarc Spreading Center and Mariana Volcanic Arc using data from the Mariana Subduction Factory Imaging Experiment. The passive component of this experiment consisted of 20 broadband seismographs deployed on the island chain and 58 ocean-bottom seismographs from June, 2003 until April, 2004. We obtained the 3D P and S wave velocity structure of the Mariana mantle wedge from a tomographic inversion of body wave arrivals from local earthquakes as well as P and S arrival times from large teleseismic earthquakes determined by multi-channel cross correlation. We also determine the 2-D attenuation structure of the mantle wedge using attenuation tomography based on local and regional earthquake spectra, and a broader-scale, lower resolution 3-D shear velocity structure from inversion of Rayleigh wave phase velocities using a two plane wave array analysis approach. We observe low velocity, high attenuation anomalies in the upper mantle beneath both the arc and backarc spreading center. These anomalies are separated by a higher velocity, lower attenuation region at shallow depths (< 80 km), implying distinct magma production regions for the arc and backarc in the uppermost mantle. The largest magnitude anomaly beneath the backarc spreading center is found at shallower depth (25-50 km) compared to the arc (50-100 km), consistent with melting depths estimated from the geochemistry of arc and backarc basalts (K. Kelley, pers. communication). The velocity and attenuation signature of the backarc spreading center is narrower than the corresponding anomaly found beneath the East Pacific Rise by the MELT experiment, perhaps implying a component of focused upwelling beneath the spreading center. The strong velocity and attenuation anomaly beneath the spreading center contrasts strongly with preliminary MT inversion results showing no conductivity anomaly in the

Evolution of an intra-oceanic island arc during the late Silurian to late Devonian, New England fold belt

International Nuclear Information System (INIS)

Offler, R.; Gamble, J.

2002-01-01

Geochemical studies of volcanic rocks in the Gamilaroi terrane and Calliope Volcanic Assemblage, New England Fold Belt, eastern Australia, indicate that the setting in which these rocks formed changed in both space and time. The Upper Silurian to Middle Devonian basalts of the Gamilaroi terrane show flat to slightly light rare-earth element (LREE) depleted chondrite normalised patterns, depletion of high field strength elements (HFSE) relative to N-MORB, low Ti/V and high Ti/Zr ratios, high Ni, Cr and large-ion lithophile element (LILE) contents, features characteristic of intra-oceanic island arc basaltic magmas. They are associated with low-K, less mafic volcanics, showing moderate LREE enrichment, low Nb and Y contents and Rb/Zr ratios. The depletion of HFSE in the basalts indicates that the magmas were derived from a refractory source in a supra-subduction zone setting. The presence of such a zone implies that the arc was associated with a backarc basin, the location of which was to the west where a wide backarc region existed from the Middle Silurian. This polarity of arc and backarc basin suggests that the subduction zone dipped to the west. In contrast to their older counterparts, Middle to Upper Devonian basalts of the Gamilaroi terrane have MORB-like chondrite normalised patterns and higher Ti and lower LILE contents. Moreover, they have low Ti/Zr ratios and MORB-like Ti/V ratios and HFSE contents, features typical of backarc basins. Dolerites of the Gamilaroi terrane also have predominantly backarc basin signatures. These features suggest that both the basalts and dolerites have been emplaced in an extensional environment produced during the rifting of the intra-oceanic island arc lithosphere. A progressive increase in Ti/V ratios, and TiO 2 and Fe 2 O 3 contents at constant MgO, of stratigraphically equivalent basalts, towards the north-northwest part of the belt, is consistent with either greater extension to the north or melting of a more fertile magma

The Rb/Sr ages for granitoids of the Middle Chukotka: a new approach to the geological history of the region

International Nuclear Information System (INIS)

Efremov, S.V.; Kozlov, V.D.; Sandimirova, G.P.

2000-01-01

For studying the history of geological evolution of the Middle Chukotka in the Mesozoic by the method of Rb-Sr dating the age of granitoids in the region was determined. It was ascertained that the granitoids have different genetic nature, their formation involving the most intensive tectonic restructuring. Magmatism was manifested in two stages. Formation of the first stage granitoids (126-144 mln. years) relates to orogenesis, while that of the second stage granitoids (∼ 80 mln. years) - to the process of the Chukotka folded region activation [ru

Study of rare earth elements for the characterization and metalogenetic evaluation of granitoids of the paranaense shield

International Nuclear Information System (INIS)

Chiodi Filho, C.; Santos, J.F. dos; Moretzsohn, J.S.

1989-01-01

REE geochemistry combined with major and trace elements data, provide some diagnostic criteria regarding the origin, the geotectonic setting and the metallogenesis of granitoid intrusions in the Parana Shield. The intrusions were grouped as mantle (Sintexis Series) and crustal (Transformation Series) origins. The two lineages include six suites, with pre, syn, tardi-to-post and post-collisional emplacement. From the metallogenetic standpoint, the 'Sintexis' granitoids can be labelled as ''0Mo-W-Cu-Au porphyry-granites''and the 'Transformation' granitoids as Sn-W greisengranites. (author) [pt

The mantle source of island arc magmatism during early subduction: Evidence from Hf isotopes in rutile from the Jijal Complex (Kohistan arc, Pakistan)

Science.gov (United States)

Ewing, Tanya A.; Müntener, Othmar

2018-05-01

The Cretaceous-Paleogene Kohistan arc complex, northern Pakistan, is renowned as one of the most complete sections through a preserved paleo-island arc. The Jijal Complex represents a fragment of the plutonic roots of the Kohistan arc, formed during its early intraoceanic history. We present the first Hf isotope determinations for the Jijal Complex, made on rutile from garnet gabbros. These lithologies are zircon-free, but contain rutile that formed as an early phase. Recent developments in analytical capabilities coupled with a careful analytical and data reduction protocol allow the accurate determination of Hf isotope composition for rutile with <30 ppm Hf for the first time. Rutile from the analysed samples contains 5-35 ppm Hf, with sample averages of 13-17 ppm. Rutile from five samples from the Jijal Complex mafic section, sampling 2 km of former crustal thickness, gave indistinguishable Hf isotope compositions with εHf(i) ranging from 11.4 ± 3.2 to 20.1 ± 5.7. These values are within error of or only slightly more enriched than modern depleted mantle. The analysed samples record variable degrees of interaction with late-stage melt segregations, which produced symplectitic overprints on the main mineral assemblage as well as pegmatitic segregations of hydrous minerals. The indistinguishable εHf(i) across this range of lithologies demonstrates the robust preservation of the Hf isotope composition of rutile. The Hf isotope data, combined with previously published Nd isotope data for the Jijal Complex garnet gabbros, favour derivation from an inherently enriched, Indian Ocean type mantle. This implies a smaller contribution from subducted sediments than if the source was a normal (Pacific-type) depleted mantle. The Jijal Complex thus had only a limited recycled continental crustal component in its source, and represents a largely juvenile addition of new continental crust during the early phases of intraoceanic magmatism. The ability to determine the Hf

The W (Sn-Mo)-specialized catinga suite and other granitoids of the Brusque Group, neo proterozoic of the state of Santa Catarina, Southern Brazil

International Nuclear Information System (INIS)

Castro, Neivaldo Araujo de; Crosta, Alvaro Penteado; Basei, Miguel Angelo Stipp

1999-01-01

The petrographic, geochemical and isotopic data on the granitoids intrusive in the Brusque Group, State of Santa Catarina, southern Brazil, are presented in this paper. These are late-to post-tectonic rocks, being the most evolved ones those that constitute the Catinga Suite. The granitoids intrusive in the southern domain of the Brusque Group are grayish rocks, in which biotite (when present) is practically the only mafic mineral. They are rather reduced, slightly alkalic, transitional between meta-and peraluminous. An acid subvolcanic pluton, the Ribeirao da Velha pluton, has similar petrographic and geochemical characteristics, and seems to be genetically related to these granitoids. LREE fractionation relative to HREE is incipient for the Catinga suite, and the REE patterns showing strong negative Eu anomaly. Initial 87 Sr/ 86 Sr ratios, from the literature for these granitoids are around 0.721 (Sao Joao Batista granitoid) and the only available t DM model age (Valsungana granitoid) points to a genesis from a continental crust of ca. 2020 Ma old. Gneiss-migmatitic rocks such as those that occur in the eastern portion of Brusque Group domain and as enclaves in the Nova Italia granitoid are strong candidates for protoliths of these granitoids. Little available information on the granitoids intrusive in the northern domain of the Brusque Group reports the presence of pink K-feldspar hornblende granitoids (Faxinal pluton) and light pink K-feldspar biotite granitoid (Guabiruba pluton). These granitoids are more enriched in K and more oxidized than those in the southern domain, and the LREE fractionation relative to HREE is strong, with the REE patterns showing incipient negative Eu anomaly. It is suggested that part of the Au concentrations found in the northern domain may be genetically associated with the granitoids, since they present characteristics favorable to promote Au mineralizations than the granitoids in the southern domain. Distinct protoliths and

Earthquake location in island arcs

Science.gov (United States)

Engdahl, E.R.; Dewey, J.W.; Fujita, K.

1982-01-01

A comprehensive data set of selected teleseismic P-wave arrivals and local-network P- and S-wave arrivals from large earthquakes occurring at all depths within a small section of the central Aleutians is used to examine the general problem of earthquake location in island arcs. Reference hypocenters for this special data set are determined for shallow earthquakes from local-network data and for deep earthquakes from combined local and teleseismic data by joint inversion for structure and location. The high-velocity lithospheric slab beneath the central Aleutians may displace hypocenters that are located using spherically symmetric Earth models; the amount of displacement depends on the position of the earthquakes with respect to the slab and on whether local or teleseismic data are used to locate the earthquakes. Hypocenters for trench and intermediate-depth events appear to be minimally biased by the effects of slab structure on rays to teleseismic stations. However, locations of intermediate-depth events based on only local data are systematically displaced southwards, the magnitude of the displacement being proportional to depth. Shallow-focus events along the main thrust zone, although well located using only local-network data, are severely shifted northwards and deeper, with displacements as large as 50 km, by slab effects on teleseismic travel times. Hypocenters determined by a method that utilizes seismic ray tracing through a three-dimensional velocity model of the subduction zone, derived by thermal modeling, are compared to results obtained by the method of joint hypocenter determination (JHD) that formally assumes a laterally homogeneous velocity model over the source region and treats all raypath anomalies as constant station corrections to the travel-time curve. The ray-tracing method has the theoretical advantage that it accounts for variations in travel-time anomalies within a group of events distributed over a sizable region of a dipping, high

Ams Fabric and Deformation of The Jawornik Granitoids In The Zloty Stok - Skrzynka Deformation Zone (sudetes, SW Poland)- Preliminary Interpretations.

Science.gov (United States)

Werner, T.; Bialek, D.

Jawornik granitoids comprise the NE-SW trending sequences of the 1cm up to 1 km thick granitoid veins surrounded by schists and gneisses of the Zloty Stok - Skrzynka deformation zone in Eastern Sudetes (SW Poland). According to conflicting theories granitoids are of magmatic origin or were formed from blastomylonitic rocks that underwent multiphase deformation. AMS studies were performed for the 53 sites lo- calized within granitoid veins and within the surrounding gneisses. AMS foliations for granitoid veins of various thickness as well as for gneisses dip at moderate to steep an- gles to N-NW. AMS lineations in the surrounding gneisses plunge subhorizontally to NE-SW that reflects the regional NE-SW shearing components. Magnetic lineations for sites within wider veins of granitoids plunge at low angles (mostly from S to W) but with more varying trends between sites. Mezoscopic tectonic foliations are record- able only in 50% of sites. They show good correlation with AMS planar fabric on the site scale. The uniformity of AMS fabric on the site scale and high AMS anisotropy within all sites (P of 1.05-1.30, T of 0.3-0.6 on average) suggest syntectonic gener- ation of granitoids. Further interpretations of the AMS and tectonic fabrics will be performed when microtectonic studies and chemical analyses results are available.

Petrology, geochronology, geochemistry and petrogenesis of Bajestan granitoids, North of Ferdows, Khorasan Razvi Province

Directory of Open Access Journals (Sweden)

Reyhaneh Ahmadirouhani

2017-02-01

Full Text Available Introduction The investigated area is situated in the south west of the Khorasan Razavi Province along the North West of the Lut Block. Different types of metal ore bodies along with non-metal deposits have already been documented in the Lut Block (Karimpour et al., 2008. Most of the study area is covered with granitoid rocks. Metamorphic rocks with unknown age are present in the north of the area. Skarns are observed in contact with fault zones and intrusive bodies. Eocene volcanic rocks with andesite and andesibasalt composition are located in the east and north east of the area (Ahmadirouhani et al., 2015. The study area that is a part of the Lut Block has a high potentials for Cu, Fe, Au, and Barite mineralization along the observed alteration zones. In the present study, the petrography, petrogenesis, Sr–Nd isotopes, and U–Pb zircon age of acidic granitoids in the east of Bajestan were investigated. Materials and methods In the current study, 400 rock samples were collected from the field and 170 thin sections were prepared for petrography studies. Thirty samples of volcanic rocks, intrusions, and dykes were analyzed using XRF at the Geological Survey of Iran. Twenty-five samples were selected for the elemental analysis using ICP-MS by the Acme Lab Company (Canada, 16 samples of them were related to acidic intrusive bodies and dykes. In addition, zircon crystals from four samples of the granitoids bodies were collected for U–Pb dating. Approximately 50 zircon grains (i.e. euhedral, clear, uncracked crystals with no visible heritage cores and no inclusions were hand-picked from each sample. Through cathodoluminescence imaging, the internal structure and the origin of zircon grains were examined at the Geological Survey of Vienna, Austria. Moreover, zircons were dated using the (LA-ICP-MS method at the Laboratory of Geochronology, the University of Vienna, Austria using the methodology outlined in Klötzli et al., (2009. Sr and Nd

Silica-enriched mantle sources of subalkaline picrite-boninite-andesite island arc magmas

Science.gov (United States)

Bénard, A.; Arculus, R. J.; Nebel, O.; Ionov, D. A.; McAlpine, S. R. B.

2017-02-01

Primary arc melts may form through fluxed or adiabatic decompression melting in the mantle wedge, or via a combination of both processes. Major limitations to our understanding of the formation of primary arc melts stem from the fact that most arc lavas are aggregated blends of individual magma batches, further modified by differentiation processes in the sub-arc mantle lithosphere and overlying crust. Primary melt generation is thus masked by these types of second-stage processes. Magma-hosted peridotites sampled as xenoliths in subduction zone magmas are possible remnants of sub-arc mantle and magma generation processes, but are rarely sampled in active arcs. Published studies have emphasised the predominantly harzburgitic lithologies with particularly high modal orthopyroxene in these xenoliths; the former characteristic reflects the refractory nature of these materials consequent to extensive melt depletion of a lherzolitic protolith whereas the latter feature requires additional explanation. Here we present major and minor element data for pristine, mantle-derived, lava-hosted spinel-bearing harzburgite and dunite xenoliths and associated primitive melts from the active Kamchatka and Bismarck arcs. We show that these peridotite suites, and other mantle xenoliths sampled in circum-Pacific arcs, are a distinctive peridotite type not found in other tectonic settings, and are melting residues from hydrous melting of silica-enriched mantle sources. We explore the ability of experimental studies allied with mantle melting parameterisations (pMELTS, Petrolog3) to reproduce the compositions of these arc peridotites, and present a protolith ('hybrid mantle wedge') composition that satisfies the available constraints. The composition of peridotite xenoliths recovered from erupted arc magmas plausibly requires their formation initially via interaction of slab-derived components with refractory mantle prior to or during the formation of primary arc melts. The liquid

Magmatic versus tectonic influence in the Eolian arc: the case of Vulcano and Lipari islands revisited

Science.gov (United States)

Ruch, Joel; Di Lorenzo, Riccardo; Vezzoli, Luigina Maria; De Rosa, Rosanna; Acocella, Valerio; Catalano, Stefano; Romagnoli, Gino

2014-05-01

The prevalent influence of magma versus tectonics for the edification and the evolution of volcanic zones is matter of debate. Here we focus on Vulcano and Lipari, two active volcanic islands located in the central sector of the Eolian arc (North of Sicily). Both systems are influenced by regional tectonics and affected by historical magmatic events taking place along a NS oriented structure, connecting both islands. We revisit and implement previous structural studies performed during the 1980's considering several new geophysical, geochemical and geodynamical findings. Four extensive structural campaigns have been performed on both islands and along the shorelines in 2012-2013 covering about 80% of the possible accessible outcrops. We collected ~500 measurements (e.g. faults, fractures and dikes) at 40 sites. Overall, most of the observed structures are oriented N-S and NNW-SSE, confirming previous studies, however, almost all features are strikingly dominated by an EW-oriented extensive regime, which is a novelty. These findings are supported by kinematic indicators and suggest a predominant dip-slip component (pitch from 80 and 130°) with alternating left and right kinematics. Marginal faulting in most recent formations have been observed, suggesting that the deformation may occur preferentially during transient deformation related to periods of magmatic activity, instead of resulting from continuous regional tectonic processes. Overall, fault and dike planes are characterized by a dominant eastward immersion, suggesting an asymmetric graben-like structure of the entire area. This may be explained by the presence of a topographic gradient connecting both islands to the deep Gioia basin to the East, leading to a preferential ample gravitational collapse. Finally, we propose a model in which the stress field rotates northward. It transits from a pure right lateral strike-slip regime along the Tindari fault zone (tectonic-dominant) to an extensive regime

INTERACTIONS BETWEEN GABBROID AND GRANITOID MAGMAS DURING FORMATION OF THE PREOBRAZHENSKY INTRUSION, EAST KAZAKHSTAN

Directory of Open Access Journals (Sweden)

S. V. Khromykh

2017-01-01

Full Text Available The paper reports on studies of the Preobrazhensky gabbro‐granitoid intrusion, East Kazakhstan, com‐ posed of the rocks that belong to four phases of intrusion, from quartz monzonites and gabbroids to granite‐ leucogranites. Specific relationships between basite and granitoid rocks are usually classified as the result of interac‐ tions and mixing of liquid magmas, i.e. magma mingling and mixing. Basite rocks are represented by a series from biotite gabbros to monzodiorites. Granitoids rocks are biotite‐amphibole granites. Porphyric granosyenites, com‐ bining the features of both granites and monzodiorites, are also involved in mingling. It is established that the primary granitoid magmas contained granosyenite/quartz‐monzonite and occurred in the lower‐medium‐crust conditions in equilibrium with the garnet‐rich restite enriched with plagioclase. Monzodiorites formed during fractionation of the parent gabbroid magma that originated from the enriched mantle source. We propose a magma interaction model describing penetration of the basite magma into the lower horizons of the granitoid source, which ceased below the viscoplastic horizon of granitoids. The initial interaction assumes the thermal effect of basites on the almost crystal‐ lized granitic magma and saturation of the boundary horizons of the basite magma with volatile elements, which can change the composition of the crystallizing melt from gabbroid to monzodiorite. A ‘boundary’ layer of monzodiorite melt is formed at the boundary of the gabbroid and granitoid magmas, and interacts with granitoids. Due to chemical interactions, hybrid rocks – porphyric granosyenites – are formed. The heterogeneous mixture of monzodiorites and granosyenites is more mobile in comparison with the overlying almost crystallized granites. Due to contraction frac‐ turing in the crystallized granites, the heterogeneous mixture of monzodiorites and granosyenites penetrate into the

Magnetotelluric Investigation of the South Aegean Volcanic Arc, Greece

Science.gov (United States)

Kalisperi, Despina; Romano, Gerardo; Smirnov, Maxim; Kouli, Maria; Perrone, Angela; Makris, John P.; Vallianatos, Filippos

2014-05-01

The South Aegean Volcanic Arc (SAVA) is a chain of volcanic islands in the South Aegean resulting from the subduction of the African tectonic plate beneath the Eurasian plate. It extends from Methana, northwest, to the Island of Nisyros southeast (450 km total length). SAVA comprises a series of dormant and historically active volcanoes, with the most prominent to be Aegina, Methana, Milos, Santorini, Kolumbo, Kos and Nisyros. The aim of the ongoing research project "MagnetoTellurics in studying Geodynamics of the hEllenic ARc (MT-GEAR)" is to contribute to the investigation of the geoelectric structure of Southern Aegean, and particularly to attempt to image the Hellenic Subduction Zone. In this context, onshore magnetotelluric (MT) measurements were recently carried out on the central and eastern part of SAVA (Milos, Santorini, Nisyros and Kos Islands). Data were collected using two MT systems running simultaneously plus a remote reference station installed in Omalos plateau (Western Crete). Robust MT data analysis of the broad-band MT soundings and the resulting model of the conductivity structure of the South Aegean Volcanic Arc is presented. The research is co-funded by the European Social Fund (ESF) and National Resources under the Operational Programme 'Education and Lifelong Learning (EdLL) within the context of the Action 'Supporting Postdoctoral Researchers' in the framework of the project title "MagnetoTellurics in studying Geodynamics of the hEllenic ARc (MT-GEAR)".

Rare earth element lithogeochemistry of granitoid mineral deposits

Energy Technology Data Exchange (ETDEWEB)

Taylor, R.P.; Fryer, B.J. (Memorial Univ. of Newfoundland, St. John' s (Canada). Dept. of Earth Sciences)

1983-12-01

As a monitor of the processes involved in the formation of granitoid mineral deposits the coherent group behaviour of the rare earth elements (REE) actively reflects changing fluid characteristics. For example, in the porphyry environment, magmatic-hydrothermal fluids produce potassic alteration with strong enrichment in the light rare earth elements, reflecting their high pH, low fluid/rock ratios, and the dominant role of Cl/sup -/ complexing in metal (i.e. Cu, Au) transport. With increasing fluid/rock ratios and decreasing pH accompanying the progressive involvement of meteoric fluids (and the production of propylitic, argillic, and phyllic alteration) anionic species such as F/sup -/ and CO/sub 3//sup 2 -/ become important in metal (e.g. Mo, W) transport through complexing, and their activity in the hydrothermal fluids is illustrated by mobilization of the heavy rare earth elements. The relative involvement of Cl/sup -/ versus F/sup -/ versus CO/sub 3//sup 2 -/ in metal transport in other granite-related systems can also be monitored through REE behaviour. Hence granitoid tin-tungsten mineralization and associated greisenization typically exhibit heavy rare earth enrichment and evidence the importance of F/sup -/ and CO/sub 3//sup 2 -/ in metal transport. Similarly, heavy rare earth element enrichment in hydrothermal uranium deposits can be related to the transport of uranium as carbonate complexes. REE are widely accepted as powerful tools in the study of rock petrogenesis, but their use has been neglected in the investigation of mineral deposits. The recognition of the systematic variation of REE distributions in granitoid mineral deposits suggests that the application of REE geochemistry, particularly when integrated with fluid inclusion and isotope studies, can provide l) an effective method for identifying the physiochemical controls of metal transport and 2) a useful criterion of elucidating metal distribution.

Rare earth element lithogeochemistry of granitoid mineral deposits

International Nuclear Information System (INIS)

Taylor, R.P.; Fryer, B.J.

1983-01-01

As a monitor of the processes involved in the formation of granitoid mineral deposits the coherent group behaviour of the rare earth elements (REE) actively reflects changing fluid characteristics. For example, in the porphyry environment, magmatic-hydrothermal fluids produce potassic alteration with strong enrichment in the light rare earth elements, reflecting their high pH, low fluid/rock ratios, and the dominant role of Cl - complexing in metal (i.e. Cu, Au) transport. With increasing fluid/rock ratios and decreasing pH accompanying the progressive involvement of meteoric fluids (and the production of propylitic, argillic, and phyllic alteration) anionic species such as F - and CO 3 2- become important in metal (e.g. Mo, W) transport through complexing, and their activity in the hydrothermal fluids is illustrated by mobilization of the heavy rare earth elements. The relative involvement of Cl - versus F - versus CO 3 2- in metal transport in other granite-related systems can also be monitored through REE behaviour. Hence granitoid tin-tungsten mineralization and associated greisenization typically exhibit heavy rare earth enrichment and evidence the importance of F - and CO 3 2- in metal transport. Similarly, heavy rare earth element enrichment in hydrothermal uranium deposits can be related to the transport of uranium as carbonate complexes. REE are widely accepted as powerful tools in the study of rock petrogenesis, but their use has been neglected in the investigation of mineral deposits. The recognition of the systematic variation of REE distributions in granitoid mineral deposits suggests that the application of REE geochemistry, particularly when integrated with fluid inclusion and isotope studies, can provide l) an effective method for identifying the physiochemical controls of metal transport and 2) a useful criterion of elucidating metal distribution

U-Pb SHRIMP data and geochemical characterization of granitoids intruded along the Coxixola shear zone, Provincia Borborema, NE Brazil

Energy Technology Data Exchange (ETDEWEB)

Guimaraes, Ignez de Pinho; Silva Filho, Adejardo Francisco da; Silva, Francis M.J.V. da, E-mail: ignez@ufpe.br [Universidade Federal de Pernanmbuco (UFPE), Recife, PE (Brazil). Dept. de Geologia; Armstrong, Richard [Australian National University (Australia)

2011-07-01

A large volume of granitic magmatism associated with large scale shear zone and metamorphism under high-T amphibolite facies conditions characterize the Brasiliano Orogeny in the Borborema Province, NE Brazil. Granitoids from two plutons and later dykes intruded along the Coxixola shear zone show distinct crystallization ages and geochemical signature. The oldest granitoids (618 ± 5 Ma), Serra de Inacio Pereira Pluton are coeval with the peak of regional metamorphism and they were probably originated by melting of a paleoproterozoic source. The granitoids from the Serra do Marinho Pluton show crystallization age of 563 ± 4 Ma and geochemical signature of post-collisional A-type granites. The later dykes have crystallization age of 526 ± 7 Ma, geochemical signature of A-type granitoids. (author)

K-U-Th systematics of terrestrial igneous rocks for planetological comparisons: volcanic rocks of the Earth oceanic island arc and Venus surface material

International Nuclear Information System (INIS)

Nikolaeva, O.V.

1997-01-01

Principles of the formation o data base for 339 samples of oceanic island arc (OIA) igneous rocks of the Earth available in literature are described as well as of the formation of fresh rock sample, characteristics of this sample, and K-U-Th-systematics of the fresh igneous rocks of Earth OIA. Results of comparison of the Venus measured rocks and Earth OIA rocks by K, U, Th

Trace-element and isotopic constraints on the source of magmas in the active volcano and Mariana island arcs, Western Pacific

Science.gov (United States)

Stern, Robert James; Ito, Emi

1983-10-01

Analytical results of the relative and absolute abundance of LIL-incompatible trace elements (K, Rb, Cs, Sr, and Ba) and isotopic compositions ( {18O}/{16O}, {87Sr}/{86Sr}, and {143Nd}/{144Nd}) are summarized for fresh samples from active and dormant volcanoes of the Volcano and Mariana island arcs. The presence of thickened oceanic crust ( T ˜ 15-20 km) beneath the arc indicates that while hybridization processes resulting in the modification of primitive magmas by anatectic mixing at shallow crustal levels cannot be neglected, the extent and effects of these processes on this arc's magmas are minimized. All components of the subducted plate disappear at the trench. This observation is used to reconstruct the composition of the crust in the Wadati-Benioff zone by estimating proportions of various lithologies in the crust of the subducted plate coupled with analyses from DSDP sites. Over 90% of the mass of the subducted crust consists of basaltic Layers II and III. Sediments and seamounts, containing the bulk of the incompatible elements, make up the rest. Bulk Western Pacific seafloor has {87Sr}/{86Sr} ˜ 0.7032 , δ 18O ˜ +7.2 , K/Rb ˜ 510, K/Ba ˜ 46, and K/Cs ˜ 13,500. Consideration of trace-element data and combined δ 18O - {87Sr}/{86Sr} systematics limits the participation of sediments in magmagenesis to less than 1%, in accord with the earlier results of Pb-isotopic studies. Combined {143Nd}/{144Nd} - {87Sr}/{86Sr} data indicate little, if any, involvement of altered basaltic seafloor in magmagenesis. Perhaps more important than mean isotopic and LIL-element ratios is the restricted range for lavas from along over 1000 km of this arc. Mixtures of mantle with either the subducted crust or derivative fluids should result in strong heterogeneities in the sources of individual volcanoes along the arc. Such heterogeneities would be due to: (1) gross variations of crustal materials supplied to the subduction zone; and (2) lesser efficiency of mixing processes

Magmatic control along a strike-slip volcanic arc: The central Aeolian arc (Italy)

Science.gov (United States)

Ruch, J.; Vezzoli, L.; De Rosa, R.; Di Lorenzo, R.; Acocella, V.

2016-02-01

The regional stress field in volcanic areas may be overprinted by that produced by magmatic activity, promoting volcanism and faulting. In particular, in strike-slip settings, the definition of the relationships between the regional stress field and magmatic activity remains elusive. To better understand these relationships, we collected stratigraphic, volcanic, and structural field data along the strike-slip central Aeolian arc (Italy): here the islands of Lipari and Vulcano separate the extensional portion of the arc (to the east) from the contractional one (to the west). We collected >500 measurements of faults, extension fractures, and dikes at 40 sites. Most structures are NNE-SSW to NNW-SSE oriented, eastward dipping, and show almost pure dip-slip motion, consistent with an E-W extension direction, with minor dextral and sinistral shear. Our data highlight six eruptive periods during the last 55 ka, which allow considering both islands as a single magmatic system, in which tectonic and magmatic activities steadily migrated eastward and currently focus on a 10 km long × 2 km wide active segment. Faulting appears to mostly occur in temporal and spatial relation with magmatic events, supporting that most of the observable deformation derives from transient magmatic activity (shorter term, days to months), rather than from steady longer-term regional tectonics (102-104 years). More in general, the central Aeolian case shows how magmatic activity may affect the structure and evolution of volcanic arcs, overprinting any strike-slip motion with magma-induced extension at the surface.

Magmatic control along a strike-slip volcanic arc: The central Aeolian arc (Italy)

KAUST Repository

Ruch, Joel

2016-01-23

The regional stress field in volcanic areas may be overprinted by that produced by magmatic activity, promoting volcanism and faulting. In particular, in strike-slip settings, the definition of the relationships between the regional stress field and magmatic activity remains elusive. To better understand these relationships, we collected stratigraphic, volcanic and structural field data along the strike-slip Central Aeolian arc (Italy): here the islands of Lipari and Vulcano separate the extensional portion of the arc (to the east) from the contractional one (to the west). We collected >500 measurements of faults, extension fractures and dikes at 40 sites. Most structures are NNE-SSW to NNW-SSE oriented, eastward dipping, and show almost pure dip-slip motion; consistent with an E-W extension direction, with minor dextral and sinistral shear. Our data highlight six eruptive periods during the last 55 ka, which allow considering both islands as a single magmatic system, in which tectonic and magmatic activity steadily migrated eastward and currently focus on a 10 km long x 2 km wide active segment. Faulting appears to mostly occur in temporal and spatial relation with magmatic events, supporting that most of the observable deformation derives from transient magmatic activity (shorter-term, days to months), rather than from steady longer-term regional tectonics (102-104 years). More in general, the Central Aeolian case shows how magmatic activity may affect the structure and evolution of volcanic arcs, overprinting any strike-slip motion with magma-induced extension at the surface.

Emplacement, petrological and magnetic susceptibility characteristics of diverse magmatic epidote-bearing granitoid rocks in Brazil, Argentina and Chile

Science.gov (United States)

Sial, A. N.; Toselli, A. J.; Saavedra, J.; Parada, M. A.; Ferreira, V. P.

1999-03-01

Magmatic epidote (mEp)-bearing granitoids from five Neoproterozoic tectonostratigraphic terranes in Northeastern (NE) Brazil, Early Palaeozoic calc-alkalic granitoids in Northwestern (NW) Argentina and from three batholiths in Chile have been studied. The elongated shape of some of these plutons suggests that magmas filled fractures and that dyking was probably the major mechanism of emplacement. Textures reveal that, in many cases, epidote underwent partial dissolution by host magma and, in these cases, may have survived dissolution by relatively rapid upward transport by the host magma. In plutons where such a mechanism is not evident, unevenly distributed epidote at outcrop scale is armoured by biotite or near-solidus K-feldspar aggregates, which probably grew much faster than epidote dissolution, preventing complete resorption of epidote by the melt. Al-in-hornblende barometry indicates that, in most cases, amphibole crystallized at P≥5 kbar. Kyanite-bearing thermal aureoles surrounding plutons that intruded low-grade metamorphic rocks in NE Brazil support pluton emplacement at intermediate to high pressure. mEp show overall chemical variation from 20 to 30 mol% (mole percent) pistacite (Ps) and can be grouped into two compositional ranges: Ps 20-24 and Ps 27-30. The highest Ps contents are in epidotes of plutons in which hornblende solidified under Pcorrosion of individual epidote crystals included in plagioclase in high-K calc-alkalic granitoids in NE Brazil, emplaced at 5-7 kbar pressure, yielded estimates of magma transport rate from 70 to 350 m year -1. Most of these plutons lack Fe-Ti oxide minerals and Fe +3 is mostly associated with the epidote structure. Consequently, magnetic susceptibility (MS) in the Neoproterozoic granitoids in NE Brazil, as well as Early Palaeozoic plutons in Argentina and Late Palaeozoic plutons in Chile, is usually low (3.0×10 -3 SI, typical of magnetite-series granitoids crystallized under higher oxygen fugacity. In NE

Tectonic implications of U-Pb (zircon) Geochronology of Chor Granitoids of the Lesser Himalaya, Himachal Pradesh, NW Himalaya

Science.gov (United States)

Singh, P.; Bhakuni, S. S.

2017-12-01

Granitoids of various ages ranging from Proterozoic to Tertiary occur throughout the Himalayan fold-thrust belt. The occurrence of the Neoproterozoic granitoids are very less in the Himalayan orogen. One of the best example of Neoproterozoic granitoids is Chor granitoids, which are the intrusive granite bodies in the Paleoproterozoic of the Lesser Himalayan Crystallines of the Jutogh Group. In the central part these granites are non-foliated homogeneous that are porphyritic and peraluminous in nature (Singh et al., 2002; Bhargava et al., 2014, 2016), whereas in the peripheral part these are foliated showing south directed shear sense of movement. In this work we present the U-Pb (zircon) geochronology of two different granites samples of the Chor granitoids of Himachal Pradesh, NW Himalaya. The Jutogh Group of rocks is thrust over the Lesser Himalayan Sequence along the Jutogh Thrust or MCT. The geochronology of the Chor Granitoids and Lesser Himalayan Crystallines and their relationship with each other, including with the Indian shield are sparsely obscure. U-Pb zircon geochrnological age populations from these granitoids yield ages between 780 and 980 Ma. One sample gives the prominent age spectra for 206Pb/238U with weighted mean age of 908.3 ± 6.7 Ma (2σ) MSWD = 2.4 (n = 18). Similarly another sample gives the age of crystallization with weight mean age of 917 ± 17 Ma (2σ) MSWD = 3 (n = 11) and Th/U ratios of both samples are >0.1, indicating their magmatic origin. As a result of ductile shearing of granites along the MCT during the Cenozoic Himalayan Orogeny, the age has reduced to 780 Ma. The Neoproterozoic age of Chor granite matches with the Neoproterozoic detrital zircon age (800 to 1000 Ma by Parrish and Hodges 1996, Decelles et al., 2000) of the HHC. On the basis of U-Pb (zircon) geochronological ages, it is revealed that the source of zircons of the Chor granite and HHC rocks was the northern margin of the Pan-African orogen. The Chor granitoids was

Petrography and geochronology of the Sao Jose dos Quatro Marcos granitoids, southwestern Mato Grosso, Brazil

International Nuclear Information System (INIS)

Carneiro, M.A.; Ulbrich, H.H.G.J.; Kawashita, K.

1989-01-01

An area of about 400Km 2 was mapped in the region of Sao Jose dos Quatro Marcos, southwestern State of Mato Grosso, western Brazil. Various granitoid rocks were recognized, intrusive into basement gneisses, and mapped as two distinct units, one of massive late granitoids (mostly 3a and 3b granites) and one of foliated granitoids, with oriented mafic minerals, consisting mainly of tonalites and, to a lesser degree, of granodiorites. The sequence of intrusion is from tonalites to granodiorites to late granites. Magmatic textures are usually preserved in the rocks, with the exception of some clearly recrystallized samples. Field aspects, as well as petrography and mineralogy, suggest a genetic relationship between the various granitoid types, showing overall features commonly cited as typical of 'I' lineages. A Rb/Sr whole-rock isochron obtained from 3b granites (six points) shows an age of 1,472 +- 19 Ma, and Sr 87 86 initial ratio of 0.7037 +- 0.0004; a nine point isochron (adding two tonalites and one granodiorite) yelds similar results (age of 1,505 +- 20 Ma, initial ratio of 0.7029+- 0.0003). The obtained ages confirm the existence of a thermal-magmatic event at about 1,500 Ma at the southern border of the Amazon Craton. (author) [pt

Geology and geochronology of Cardoso Island, in the southeastern coast of Sao Paulo State

International Nuclear Information System (INIS)

Weber, Werner

1998-01-01

This aim of work is the geological and geochronological study of rocks cropping out on Cardoso Island, on the southeastern coast of Sao Paulo States, close to be boundary with Parana State. The Island with an area of about 151 km 2 is a protected area administered by the Forest Institute of Environment Secretariat of the State of Sao Paulo. It is mountanious, with a peak at 814 m, and is covered by dense Mata Atlantica vegetation. The terrains which compose the island are mainly an igneous complex with light grey leucocratic, inequigranular, medium - to coarse-grained syenites. The predominant Tres Irmaos Syenite (STI), composed of pyroxene, hornblende, and perthitic to mesoperthitic microcline, has a magmatic flow structures, and is cut by the Cambriu alkali-feldspar Granites (GC), which is pinkish grey, leucocratic and medium-grained. Geochemical analysis of STI and GC demonstrate their meta luminous alkaline nature and late-orogenic to an orogenic character. The geochronological results suggest that the bodies were formed between 620 and 570 My according to the U-Pb method in zircons, with cooling between 597 and 531 My (K-Ar in amphiboles). Whole rock Sm-Nd analysis yield T DM ages in the Meso and Paleoproterozoic (1.200 - 2.200 My). belt of low grade meta sedimentary rocks occurs in the northern part of the island. Quartz schist, quartz-mica schist and mica-quartz schist, often containing andaluzite and cordierite, predominate. The geochemical and geochronological data suggest that the sources of the metasediments were andesites of continental arc whose protolities separated from the mantle during the Paleoproterozoic, between 1.800 and 2.200 My. These metasediments probably continue on the continent in the Taquari region and extend southwards in narrow strips between the granitoids of the Paranagua Domain. Although quaternary deposits are expressive, they were not studied in details since they were not the objectives of this study. (author)

A petrochemical investigation of a group of granitoids in the Cnydas area, West of Upington

International Nuclear Information System (INIS)

Jankowitz, J.A.C.

1981-01-01

Detailed mapping in the eastern Namaqualand Metamorphic Complex west of Upington, indicates that the Cnydas batholith can be divided into ten different granitoidal phases. The classification is based on the intrusive field relationships supported by variation in mineralogy, texture, petrography and geochemistry. A differentiation sequence from granodiorite through mesocratic granite to leucogranite is proposed on the basis of geochemical evidence. The chemistry and petrography suggests an I-type origin for these granitoids

Lithogeochemistry of rare-earth elements in the characterization of granitoids from the Cachoeirinha belt, Northeast Brazil

International Nuclear Information System (INIS)

Sial, A.N.

1984-01-01

Detailed rare-earth element study on about 40 samples from 14 granitic bodies distributed within and in adjacent areas of the Cachoeirinha belt, states of Pernambuco and Paraiba, between 37 0 and 40 0 W long. and 7 0 and 8 0 15' lat., was performed. These bodies include potassic, calc-alkalic, and peralkalic granitic associations, besides one with trondhjemitic affinities. The REE patterns for the potassic granitoids (Bodoco, Serra da Lagoinha and Itaporanga) which pierced basement migmatites, are strongly fractionated, mutually similar, LREE-enriched, and lack En anomaly. The calc-alkalic granitoids (Conceicao-type) intruded the low-grade metamorphics, and display strongly fractionated REE patterns, LREE-enriched relative to HREE, and exhibit a discrete, yet significative negative Eu anomaly. The granitoids with trondhjemitic affinities (Serrita-type) which intruded the Salgueiro schists, exhibit Σ REE much lower than in the previously mentioned granituids - REE patterns are strongly fractionated, LREE - enriched in relation to HREE, with discrete positive Eu anomaly and HREE approaching chondrite abundances. REE patterns of the peralkalic granitoids (Catingueira-type) ressemble those of rocks with trondhjemitic affinities and show a discrete positive Eu anomaly. The REE geochemistry agrees essentially with the major chemistry of the 4 granitoid associations, and is consistent with the 18 O/ 1 6O behavior which of ten varies sympathetically with Σ REE and S;O 2 . The presence of magmatic epidote, a high pressure phase, in three of these associations suggests that these rocks crystallized at a relatively great depth. (D.M.) [pt

Petrology and Geochemistry of Shakh Sefid Granitoid and related skarn in the North of Rayen (southeastern of Kerman

Directory of Open Access Journals (Sweden)

Habib biabangard

2017-11-01

Full Text Available The Shakh Sefid Granitoid pluton and related Skarn are located 80 Km in the southeastern of Kerman and 20 Km north of Rayen. This area   is geologically located in the southeastern of the Lut block in the Central Iran. The Shakh Sefid Granitoid with Eocene-Oligocene age cuts the Cretaceous sedimentary rocks and led to the formation of Skarn. The granitoids are granite and granodiorite in composition composing of quartz, plagioclase, orthoclase, as primary minerals, biotite as minor and chlorite and sericite as secondary minerals. The sedimentary rocks are shale, sandstone, siltstone and limestone. Metamorphic rocks are marble and Skarns. The Skarn is calcic type. Garnet (grossular-andradite, tremolite and magnetite are the main minerals that are often accompanied with hematite, goethite and limonite. Pyrite, chalcopyrite and copper carbonate (malachite and azurite are the other minerals in Skarn. Geochemical studies show that the amount of major and minor elements of granitoid with increasing SiO2 content do not change due to the uniform mass, low dispersion of elements which result from heterogeneous textures and low alteration zone. Spider diagrams from minor elements normalized to Chondrite and primitive mantle show enrichment of all elements except for Ti, positive anomalies of Th, Pb and negative anomalies of Ti, P and Sr for the Sakh Sefid granitoids are probably due to crustal contamination. They are enriched in light rare earth elements (LREE between 10 to 100 times and heavy elements (HREE enrichment between 1 to 10 times compared to the reference (chondrite and regular pattern with approximately the same slope , the parallel trends indicate that the granitoid rocks share  a common source rock . The Shakh Sefid granitoid is I-type, metaluminous to peraluminous belonging to an active continental margin. Mineral and Mineralization in Kuh Shakh Sefid skarn is remarkably similar to iron skarn deposits. Minerals such as garnet and

Isotopic and chemical evidence for three accretionary magmatic arcs ( 1.79 - 1.42 Ga) in the SW Amazon Craton, Mato Grosso State, Brazil

International Nuclear Information System (INIS)

Geraldes, Mauro Cesar; Teixeira, Wilson; Schmus, William Randall van

2000-01-01

Twenty-one U/Pb ages of granitoids in the SW Amazon craton define three crustal accretionary events during the Paleo-and Mesoproterozoic that represent significant portions of the Rio Negro-Juruena Province and the Rondonian/San Ignacio province. Two events refer to the Rio Negro-Juruena province: The Alto Jauru greenstone belt comprises acid volcanics and tonalite to granite gneisses with U/Pb ages from 1790 to 1750 Ma. Sm/Nd isotopic data (e N -d (t) from +2.6 to +2.2 and T DM from 2.0 to 1.80 Ga) indicate a volcanic arc with juvenile signatures for these units. The second event (Cachoeirinha arc) comprises granites to tonalites with U/Pb ages from 1580 to 1530 Ma. Sm/Nd results. (author)

Bermuda 3 arc-second Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The 3 arc-second Bermuda DEM will be used to support NOAA's tsunami forecast system and for tsunami inundation modeling. This DEM encompasses the islands of Bermuda...

Bermuda 1 arc-second Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The 1 arc-second Bermuda DEM will be used to support NOAA's tsunami forecast system and for tsunami inundation modeling. This DEM encompasses the islands of Bermuda...

Gridded multibeam bathymetry of Rota Island, Commonwealth of the Northern Mariana Islands (CNMI)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Gridded bathymetry shelf, bank and slope environments of Rota Island, CNMI. Bottom coverage was achieved in depths between 0 and -1905 meters. The netCDF and Arc...

Genesis of Neoproterozoic granitoid magmatism in the Eastern Aracuai Fold Belt, eastern Brazil: field, geochemical and Sr-Nd isotopic evidence

International Nuclear Information System (INIS)

Celino, Joil Jose; Botelho, Nilson Francisquini; Pimentel, Marcio Martins

2000-01-01

The Neoproterozoic granitoid magmatism of the Aracuai Fold Belt (AFB) is an important element for the discussion of the evolution of this belt and its relationships with the African counterpart, the West Congo Belt. In the eastern part of the AFB, four different granitoid suites were recognized. The Nanuque Suite (NQS) comprises syn-tectonic peraluminous cordierite-bearing monzogranites. The Sao Paulinho Suite (SPS) consists of Th-rich peraluminous two mica or biotite-only granitoids. Calc-alkalic granitoids with magmatic epidote were grouped into the Itagimirim Suite (ITS) and post-tectonic charnockitic rocks were grouped into the Salomao Suite (SLS). Sm-Nd mineral isochron and Rb- isochron yielded ages of yielded ages of respectively 761 Ma and 714 Ma for the Nanuque and Sao Paulino suites. The general Sr-Nd isotopic characteristics of the granitoid suites and some country rocks indicate that the parental magmas were mostly the product of melting of the Paraiba do Sul metasediments. The chronological and genetic evolution the Neoproterozoic plutonism can be envisaged in a model of est-dipping subduction zone, followed by a continental collision between the Brasiliano/Pan-African (Brazil) and Congo (Africa cratons and final episodes of uplift and collapse. (author)

Petrography and geochronology (U/Pb-Sm/Nd) the Passagem Granite, Pensamiento Granitoid Complex, Paragua Terrane, SW Amazon Craton, Mato Grosso, Brazil; Petrologia e geocronologia (U/Pb-Sm/Nd) do Granito Passagem, Complexo Granitoide Pensamiento, SW do Craton Amazonico (MT)

Energy Technology Data Exchange (ETDEWEB)

Jesus, Gisely Carmo de, E-mail: giselycarmo@hotmail.co [Universidade Federal de Mato Grosso (ICET/UFMT), Cuiaba, MT (Brazil). Inst. de Ciencias Exatas e da Terra. Programa de Pos-Graduacao em Geociencias; Sousa, Maria Zelia Aguiar de, E-mail: mzaguiar@terra.com.b [Universidade Federal de Mato Grosso(ICET/UFMT), Cuiaba, MT (Brazil). Inst. de Ciencias Exatas e da Terra. Dept. de Recursos Minerais; Ruiz, Amarildo Salina; Matos, Joao Batista de, E-mail: asruiz@gmail.co, E-mail: jmatos@cpd.ufmt.b [Universidade Federal de Mato Grosso (ICET/UFMT), Cuiaba, MT (Brazil). Inst. de Ciencias Exatas e da Terra. Dept. de Geologia Geral

2010-09-15

The Passagem granite includes stocks, plugs and dikes located in the Ricardo Franco hill - Vila Bela da Santissima Trindade region - state of Mato Grosso, central Brazil. The Passagem Granite is included in the Paragua terrane - SW Amazonian Craton. It consists of isotropic monzogranite, sienogranite and more rarely granodiorites with leucocratic dark gray to white color. These rocks range from hypidomorphic inequigranular to xenomorphic texture, fine to medium grained. Biotite is the only primary mafic present as essential phase and characterize an expanded slightly acid sequence formed by a sub-alkaline magmatism of high-potassium calc-alkaline, slightly peraluminous composition from arc magmatic tectonic environment during a post-collisional period. Mechanism of fractional crystallization of plagioclase, biotite, titanite, apatite and zircon associated with simultaneous crustal assimilation are suggested for the evolution of these rocks. The results support the hypothesis of a post-collisional magmatism in the Paragua terrane at 1284 +- 20 Ma corresponding to the crystallization age of the Passagem granite. This paper propose that Passagem Granite represents as an extension in Brazilian terrane of the Pensamiento Granitoid Complex. (author)

The crustal thickness and lithospheric structure of active and inactive volcanic arc terrains in Fiji and Tonga

Science.gov (United States)

Chen, J.; Wiens, D.; Wei, S. S.; Zha, Y.; Julià, J.; Cai, C.; Chen, Y. J.

2015-12-01

In order to investigate the crustal thickness and lithospheric structure beneath active and inactive volcanic arcs in Fiji and Tonga, we analyzed receiver functions from teleseismic P waves as well as Rayleigh waves from teleseismic earthquakes and ambient noise. The data were recorded by stations from three previous temporary seismic arrays deployed on the islands during 1993-1995, 2001-2002, and 2009-2010. Receiver functions were calculated with an iterative deconvolution in the time domain. We used an H-k stacking method to get preliminary Moho depth estimates under the island arcs, after assuming constant seismic average crustal P velocity. We also determined the shear wave velocity structure beneath each station from a 1-D combined inversion of receiver functions and Rayleigh wave phase velocity dispersion curves from ambient noise cross correlation at 8s - 20s and teleseismic surface waves at 20s-90s. The joint inversion models reveal that the Moho beneath the main islands of the Fiji plateau is 26-31 km deep, whereas the crust under the outer islands - including the Lau Ridge - is generally thinner, with Moho depths of 21-23.5 km. The thinnest crust (16 km) is found beneath Moala Island located between the Fiji Platform and the Lau Ridge. Crustal thickness beneath several Tonga islands is about 18-20 km. A relatively high velocity lithosphere (Vs of 4.4 - 4.5 km/s) extends to only about 60 km depth beneath the outer Fiji Islands and Lau Ridge, but to depths of 90 km underneath the main islands of the Fiji Plateau. The much thicker crust and lithosphere of the Fiji plateau relative to the Lau Ridge and Tonga Arc reflects its much longer geological history of arc crust building, going back to the early Miocene.

On the metamorphic history of an Archaean granitoid greenstone terrane, East Pilbara, Western Australia, using the 40Ar/39Ar age spectrum technique

International Nuclear Information System (INIS)

Wijbrans, J.R.; McDougall, I.

1987-01-01

Age spectrum analyses of blue-green hornblendes from amphibolites from the Western Shaw Belt, East Pilbara, Western Australia, indicate an age of at least 3200 Ma for early regional metamorphism. Ages on hornblende and muscovite from the narrow contact zone with the adjacent Yule Batholith probably data updoming of the granitoid gneiss terranes at 2950 Ma. Hornblendes from within the Shaw Batholith and from a contact zone of a post-tectonic granitoid yield ages of 2840-2900 Ma, indicating either prolonged high temperatures within the granitoid gneiss terranes or a separate thermal pulse associated with the intrusion of post-tectonic granitoids. The preservation of very old hornblendes in a narrow greenstone belt surrounded by massive granitoid gneiss domes indicates that remarkable contrasts in metamorphic geotherms existed over short distances during the Late Archaean, suggesting that updoming occurred during a period of rapid tectonism. (orig.)

Melt inclusion: methods, applications and problem: Silica-rich melts in quartz xenoliths from Vulcano islands and their bearing on processes of crustal melting and crust-magma interaction in the Aeolian Arc, Italy

NARCIS (Netherlands)

Frezzotti, M.L.; Zavon, V.; Peccerillo, A.; Nikogosian, I.

2002-01-01

Silica-rich melts in quartz xenoliths from Vulcano islands and their bearing on processes of crustal melting and crust-magma interaction in the Aeolian Arc, Italy Proceedings of workshop Melt inclusion: methods, applications and problem. Napoli, Italy, September 2002, p. 71-73

Crustal growth of the Izu-Ogasawara arc estimated from structural characteristics of Oligocene arc

Science.gov (United States)

Takahashi, N.; Yamashita, M.; Kodaira, S.; Miura, S.; Sato, T.; No, T.; Tatsumi, Y.

2011-12-01

Japan Agency for Marine-Earth Science and Technology (JAMSTEC) carried out seismic surveys using a multichannel reflection system and ocean bottom seismographs, and we have clarified crustal structures of whole Izu-Ogasawara (Bonin)-Marina (IBM) arc since 2002. These refection images and velocity structures suggest that the crustal evolution in the intra-oceanic island arc accompanies with much interaction of materials between crust and mantle. Slow mantle velocity identified beneath the thick arc crusts suggests that dense crustal materials transformed into the mantle. On the other hand, high velocity lower crust can be seen around the bottom of the crust beneath the rifted region, and it suggests that underplating of mafic materials occurs there. Average crustal production rate of the entire arc is larger than expected one and approximately 200 km3/km/Ma. The production rate of basaltic magmas corresponds to that of oceanic ridge. Repeated crustal differentiation is indispensable to produce much light materials like continental materials, however, the real process cannot still be resolved yet. We, therefore, submitted drilling proposals to obtain in-situ middle crust with P-wave velocity of 6 km/s. In the growth history of the IBM arc, it is known by many papers that boninitic volcanisms preceded current bimodal volcanisms based on basaltic magmas. The current volcanisms accompanied with basaltic magmas have been occurred since Oligocene age, however, the tectonic differences to develop crustal architecture between Oligocene and present are not understood yet. We obtained new refraction/reflection data along an arc strike of N-S in fore-arc region. Then, we estimate crustal structure with severe change of the crustal thickness from refraction data, which are similar to that along the volcanic front. Interval for location of the thick arc crust along N-S is very similar to that along the volcanic front. The refection image indicates that the basement of the fore-arc

Ar-Ar dating and petrogenesis of the Early Miocene Taşkapı-Mecitli (Erciş-Van) granitoid, Eastern Anatolia Collisional Zone, Turkey

Science.gov (United States)

Oyan, Vural

2018-06-01

The Early Miocene Taşkapı-Mecitli granitoid that is located in the northern section of the Eastern Anatolia Collision Zone has typical I-type, metaluminous and calk-alkaline characteristics. It also contains mafic microgranular / magmatic enclaves (MMEs). New Ar-Ar dating results show that the age of the Taşkapı-Mecitli granitoid is ∼23 Ma and it crystallised in the Early Miocene, in contrast to its previously known Cretaceous age. Identical crystallisation ages (∼23 Ma), similar mineral assemblages and geochemical compositions, and indistinguishable isotopic compositions of MMEs and host rocks imply that the MMEs are most consistent with a cumulate origin formed at earlier stages of the same magmatic system that produced the Taşkapı-Mecitli granitoid. MELTS modelling suggests that magma of the Taşkapı-Mecitli granitoid was the result of fractionation under a crustal pressure of 4 kbar, with a H2O content of 1.5%. EC-AFC model calculation reveals that the Taşkapı-Mecitli granitoid includes from 0.5% to 2% crustal assimilation rates. These rates indicate that crustal contamination can be negligible when compared to fractional crystallisation in the evolution of the magma beneath the Taşkapı-Mecitli granitoid. The partial melting model calculations and MORB-normalised trace element concentrations of the least evolved samples of the Taşkapı-Mecitli granitoid are consistent with those of mafic melts obtained from partial melting of interacting mantle- lower crust with a melting degree of 18%. The age (23 Ma) of the post- or syn-collisional Taşkapı-Mecitli granitoid suggests that the collision between Arabian and Eurasian plates could be before/around ∼23 Ma (Late Oligocene to Early Miocene).

Electron probe micro analyser chemical zircon ages of the Khetri granitoids, Rajasthan, India: records of widespread late palaeoproterozoic extension-related magmatism

International Nuclear Information System (INIS)

Kaur, Parampreet; Chaudhri, Naveen; Biju-Sekhar, S.; Yokoyama, K.

2006-01-01

A number of granitoid plutons were emplaced in the northernmost entity of the Aravalli craton, the Khetri Copper Belt (KCB). We report here Th-U-Pb electron probe micro analyser chemical ages for zircon and monazite from two granitoid plutons of the north KCB, the Biharipur and Dabla. Zircons occurring in the granitoids depict well-developed magmatic zoning and are chronologically unzoned. Both the plutons and their diverse granitoid facies are coeval and provide ages around 1765-1710 Ma. Geochemical attributes of the studied plutons are typical of A-type within-plate granites and consistent with an extensional tectonic environment. Our new age data are comparable to the petrologically similar A-type granitoids of the Alwar region, which have provided zircon chemical ages around 1780-1710 Ma. These analogous ages imply a widespread late palaeoproterozoic extension-related plutonism in the northern part of the Aravalli craton. The monazites, which were recovered only from the mafic magmatic rocks of the Biharipur pluton, yielded an isochron age of 910 ±10 Ma, signifying an over- print of a younger neoproterozoic thermal event in the region. (author)

S-type granite from the Gongpoquan arc in the Beishan Orogenic Collage, southern Altaids: Implications for the tectonic transition

Science.gov (United States)

Wang, Xinyu; Yuan, Chao; Zhang, Yunying; Long, Xiaoping; Sun, Min; Wang, Lixing; Soldner, Jeremie; Lin, Zhengfan

2018-03-01

Voluminous Paleozoic intrusions occur in the Beishan Orogenic Collage (BOC) and their genesis and tectonic background are important to reconstruct the accretion-collision processes in the southernmost Altaids. Paleozoic is an important period for arc development in the BOC, where the Gongpoquan and Huaniushan arcs are located. There are two pulses of magmatism in the Huaniushan and Gongpoquan arcs, i.e., the ca. 470-423 Ma I-type and ca. 424-395 Ma S- and A-type granitoids. In this study, we focus on two peraluminous granitic plutons in the Gongpoquan arc, i.e., the Baitoushan muscovite granite and Haergen two-mica granite, aiming at unraveling their petrogenesis and tectonic background. Zircon LA-ICP-MS U-Pb dating yields emplacement ages of ca. 409-395 Ma and ca. 409 Ma for the Baitoushan and Haergen plutons, respectively. Both the granitic plutons are strongly peraluminous with A/CNK ratios of 1.10-1.20, indicative of S-type affinities. The rocks are characterized by high SiO2 and K2O contents with high CaO/Na2O ratios. Moreover, the rocks possess low MgO contents, Rb/Sr and Rb/Ba ratios, together with their relatively high initial 87Sr/86Sr ratios (0.7139-0.7152) and less radiogenic εNd(t) values (-3.15 to -5.17), implying a clay-poor and plagioclase-rich crustal source. Compared with earlier pulse of arc-related magmatism (ca. 470-423 Ma), the latter pulse of magmatism (ca. 424-395 Ma) consists mainly of "normal granite" characterized by higher SiO2 (>66%) and K2O contents, weaker fractionated REE patterns and lower δEu values, and gabbroic to dioritic intrusions are only sporadic. Moreover, the granitoids of the latter pulse show variable but more crust-like Sr-Nd isotopic compositions ((87Sr/86Sr)0 = 0.7038-0.7327; εNd(t) = -6.70 to +0.33) than the earlier ones ((87Sr/86Sr)0 = 0.7024-0.7080; εNd(t) = -2.56 to +8.86), indicating that the Early Devonian (ca. 424-395 Ma) experienced extensive crustal melting with minor involvement of mantle materials

Geochemistry of the Serifos calc-alkaline granodiorite pluton, Greece: constraining the crust and mantle contributions to I-type granitoids

Science.gov (United States)

Stouraiti, C.; Baziotis, I.; Asimow, P. D.; Downes, H.

2017-11-01

The Late Miocene (11.6-9.5 Ma) granitoid intrusion on the island of Serifos (Western Cyclades, Aegean Sea) is composed of syn- to post-tectonic granodiorite with quartz monzodiorite enclaves, cut by dacitic and aplitic dikes. The granitoid, a typical I-type metaluminous calcic amphibole-bearing calc-alkaline pluton, intruded the Cycladic Blueschists during thinning of the Aegean plate. Combining field, textural, geochemical and new Sr-Nd-O isotope data presented in this paper, we postulate that the Serifos intrusion is a single-zoned pluton. The central facies has initial 87Sr/86Sr = 0.70906 to 0.7106, ɛNd(t) = - 5.9 to - 7.5 and δ18Οqtz = + 10 to + 10.6‰, whereas the marginal zone (or border facies) has higher initial 87Sr/86Sr = 0.711 to 0.7112, lower ɛ Nd(t) = - 7.3 to - 8.3, and higher δ18Οqtz = + 10.6 to + 11.9‰. The small range in initial Sr and Nd isotopic values throughout the pluton is paired with a remarkable uniformity in trace element patterns, despite a large range in silica contents (58.8 to 72 wt% SiO2). Assimilation of a crustally derived partial melt into the mafic parental magma would progressively add incompatible trace elements and SiO2 to the evolving mafic starting liquid, but the opposite trend, of trace element depletion during magma evolution, is observed in the Serifos granodiorites. Thermodynamic modeling of whole-rock compositions during simple fractional crystallization (FC) or assimilation-fractional crystallization (AFC) processes of major rock-forming minerals—at a variety of pressure, oxidation state, and water activity conditions—fails to reproduce simultaneously the major element and trace element variations among the Serifos granitoids, implying a critical role for minor phases in controlling trace element fractionation. Both saturation of accessory phases such as allanite and titanite (at SiO2 ≥ 71 wt%)(to satisfy trace element constraints) and assimilation of partial melts from a metasedimentary component (to

Direct evidence for the origin of low-18O silicic magmas: Quenched samples of a magma chamber's partially-fused granitoid walls, Crater Lake, Oregon

International Nuclear Information System (INIS)

Bacon, C.R.; Adami, L.H.; Lanphere, M.A.

1989-01-01

Partially fused granitoid blocks were ejected in the climactic eruption of Mount Mazama, which was accompanied by collapse of Crater Lake caldera. Quartz, plagioclase, and glass in the granitoids have much lower δ 18 O values (-3.4 to +4.9per mille) than any fresh lavas of Mount Mazama and the surrounding region (+5.8 to +7.0per mille). Oxygen isotope fractionation between phases in granitoids is consistent with equilibrium at T≥900deg C following subsolidus exchange with hydrothermal fluids of meteoric origin. Assimilation of ≅ 10-20% of material similar to these granitoids can account for the O and Sr isotopic compositions of lavas and juvenile pyroclasts derived from the climactic magma chamber, many of which have δ 18 O values ≅ 0.5per mille or more lower than comparable lavas of Mount Mazama. The O isotope data provide the only clear evidence for such assimilation because the mineralogy and chemical and radiogenic isotopic compositions of the granitoids (dominantly granodiorite) are similar to those of erupted juvenile magmas. The granitoid blocks from Crater Lake serve as direct evidence for the origin of 18 O depletion in large, shallow silicic magma bodies. (orig.)

Petrogenesis of Luchuba and Wuchaba granitoids in western Qinling: geochronological and geochemical evidence

Science.gov (United States)

Kong, Juanjuan; Niu, Yaoling; Duan, Meng; Zhang, Yu; Hu, Yan; Li, Jiyong; Chen, Shuo

2017-12-01

The West Qinling Orogenic Belt (WQOB) is a major portion of the Qinling-Dabie-Sulu Orogen and holds essential information for understanding the prolonged evolution of the northeastern branch of the Paleo-Tethys in East Asia. This study focuses on the petrogenesis of granitoids from Luchuba and Wuchaba plutons in the WQOB. We obtained zircon U-Pb ages of 211 ± 1.4 Ma for the Luchuba pluton and 218.7 ± 1.3 Ma for the Wuchaba pluton, which are the same as the proposed timing of continental collision at ˜220 Ma. We thus interpret the granitoids to represent a magmatic response to the collision between the North China Craton (NCC) and the Yangtze Block (YB). The two plutons are metaluminous to weakly peraluminous I-type granitoids. Samples from the two plutons show strong light rare earth element (REEs) enrichment and weak heavy REE depletion, with varying negative Eu anomalies, which is most consistent with significant plagioclase fractionation although the possible effect of plagioclase as residual phase in the magma source region cannot be ruled out. In primitive mantle normalized multi-element variation diagrams, nearly all the samples show negative Nb, Ta, P and Ti anomalies and relative enrichment in Rb, Pb, U and K. These characteristics resemble those of the average continental crust. The Luchuba pluton has lower (87Sr/86Sr)i (0.7051 to 0.7104), higher ɛNd(t) (-8.11 to -5.73) and ɛHf(t) (-6.70 to -1.65) than mature continental crust ([87Sr/86Sr] i > 0.72, ɛNd(t) pluton also has lower (87Sr/86Sr)i (0.7069 to 0.7080), higher ɛNd(t) (-9.86 to -3.34) and ɛHf(t) (-5.69 to 1.58) than mature continental crust. We conclude that the Luchuba and Wuchaba granitoids in the WQOB are best explained as resulting from fractional crystallization with crustal assimilation of parental magmas derived from melting of Mianlue oceanic crust under amphibolite facies conditions during the initial stage of continental collision between the North China Craton and the Yangtze Block

Alaska Open-file Report 144 Assessment of Thermal Springs Sites Aleutian Arc, Atka Island to Becherof Lake -- Preliminary Results and Evaluation

Energy Technology Data Exchange (ETDEWEB)

Motyka, R.J.; Moorman, M.A.; Liss, S.A.

1981-12-01

Twenty of more than 30 thermal spring areas reported to exist in the Aleutian arc extending from Atka Island to Becherof Lake were investigated during July and August, 1980. Thermal activity of three of these sites had diminished substantially or no longer existed. At least seven more sites where thermal-spring activity is probable or certain were not visited because of their remoteness or because of time constraints. The existence of several other reported thermal spring sites could not be verified; these sites are considered questionable. On the basis of geothermometry, subsurface reservoir temperatures in excess of 150 C are estimated for 10 of the thermal spring sites investigated. These sites all occur in or near regions of Recent volcanism. Five of the sites are characterized by fumaroles and steaming ground, indicating the presence of at least a shallow vapor-dominated zone. Two, the Makushin Valley and Glacier Valley thermal areas, occur on the flanks of active Mukushin Volcano located on Unalaska Island, and may be connected to a common source of heat. Gas geothermometry suggests that the reservoir feeding the Kliuchef thermal field, located on the flanks of Kliuchef volcano of northeast Atka Island, may be as high as 239 C.

Along Arc Structural Variation in the Izu-Bonin Arc and its Implications for Crustal Evolution Processes

Science.gov (United States)

Kodaira, S.; Sato, T.; Takahashi, N.; Ito, A.; Kaneda, Y.

2005-12-01

A continental-type middle crust having Vp = 6.1 - 6.3 km/s has been imaged at several oceanic island arcs (e.g. northern Izu, Mariana, Tonga, Kyushu-Palau ridge) since Suyehiro et al. (1996) has found a felsic middle crust in the northern Izu arc. A high velocity lower crust (Vp > 7.3 km/s) underlying the felsic middle crust has been also underlined as a characteristic structure in the northern Izu arc. A bulk composition of the crust in the Izu arc may indicate more mafic than that of a typical continental crust due to a large volume of the high velocity lower crust. Since a crust becomes more mature toward the north along the Izu-Bonin arc, investigating structural variation along the volcanic front has been believed to provide a fundamental knowledge for a crustal evolution process. In 2004 and 2005, Japan Agency for Marine-Earth Science and Technology has conducted two along arc wide-angle seismic surveys from the Sagami-bay to the Kita-Iwo jima, a total profile length of about 1000 km. Although data from the Bonin-part of the profile which were acquired this year has not been processed yet, a result from the Izu-part, from the Sagami-bay to Tori shima, shows significant structural variations along the volcanic front. The crustal thickness are varied with a wavelength of several tens of km, i.e., thickened up to 25-30 km around the volcanoes (the Miyake jama, Hachijo jima, Aoga sima, Sumisu jima), while thinned down to 20 km between them. The fine seismic velocity image obtained by refraction tomography as well as a wide-angle reflection migration shows that the variation of the crustal block having 6.0 - 6.7 km/s, which is a typical continental crustal velocity, is mainly responsible for the observed variation of the crustal thickness. The thickness of the high velocity lower crust is not significantly varied along the arc. Therefore, an average crustal seismic velocity (varied 6.6 to 7.0 km/s) represents a higher velocity that that of a typical continental

On the metamorphic history of an Archaean granitoid greenstone terrane, East Pilbara, Western Australia, using the /sup 40/Ar//sup 39/Ar age spectrum technique

Energy Technology Data Exchange (ETDEWEB)

Wijbrans, J.R.; McDougall, I.

1987-07-01

Age spectrum analyses of blue-green hornblendes from amphibolites from the Western Shaw Belt, East Pilbara, Western Australia, indicate an age of at least 3200 Ma for early regional metamorphism. Ages on hornblende and muscovite from the narrow contact zone with the adjacent Yule Batholith probably data updoming of the granitoid gneiss terranes at 2950 Ma. Hornblendes from within the Shaw Batholith and from a contact zone of a post-tectonic granitoid yield ages of 2840-2900 Ma, indicating either prolonged high temperatures within the granitoid gneiss terranes or a separate thermal pulse associated with the intrusion of post-tectonic granitoids. The preservation of very old hornblendes in a narrow greenstone belt surrounded by massive granitoid gneiss domes indicates that remarkable contrasts in metamorphic geotherms existed over short distances during the Late Archaean, suggesting that updoming occurred during a period of rapid tectonism.

The mechanics of granitoid systems and maximum entropy production rates.

Science.gov (United States)

Hobbs, Bruce E; Ord, Alison

2010-01-13

A model for the formation of granitoid systems is developed involving melt production spatially below a rising isotherm that defines melt initiation. Production of the melt volumes necessary to form granitoid complexes within 10(4)-10(7) years demands control of the isotherm velocity by melt advection. This velocity is one control on the melt flux generated spatially just above the melt isotherm, which is the control valve for the behaviour of the complete granitoid system. Melt transport occurs in conduits initiated as sheets or tubes comprising melt inclusions arising from Gurson-Tvergaard constitutive behaviour. Such conduits appear as leucosomes parallel to lineations and foliations, and ductile and brittle dykes. The melt flux generated at the melt isotherm controls the position of the melt solidus isotherm and hence the physical height of the Transport/Emplacement Zone. A conduit width-selection process, driven by changes in melt viscosity and constitutive behaviour, operates within the Transport Zone to progressively increase the width of apertures upwards. Melt can also be driven horizontally by gradients in topography; these horizontal fluxes can be similar in magnitude to vertical fluxes. Fluxes induced by deformation can compete with both buoyancy and topographic-driven flow over all length scales and results locally in transient 'ponds' of melt. Pluton emplacement is controlled by the transition in constitutive behaviour of the melt/magma from elastic-viscous at high temperatures to elastic-plastic-viscous approaching the melt solidus enabling finite thickness plutons to develop. The system involves coupled feedback processes that grow at the expense of heat supplied to the system and compete with melt advection. The result is that limits are placed on the size and time scale of the system. Optimal characteristics of the system coincide with a state of maximum entropy production rate. This journal is © 2010 The Royal Society

Geochemical studies, magmatic evolution, microstructures and replacement mechanisms in Jebale-Barez granitoid Complex (East and Southeast Jiroft

Directory of Open Access Journals (Sweden)

Jamal Rasouli

2017-08-01

Full Text Available Introduction The Jebale-Barez Plutonic Complex (JBPC is composed of many intrusive bodies and is located in the southeastern province of Kerman on the longitude of the 57◦ 45 ' east to 58◦ 00' and Northern latitudes 28◦ 30' to 29◦ 00'. The petrologic composition is composed of granodiorite, quartzdiorite, granite, alkali-granite, and trace amounts of tonalite with dominant granodiorite composition. Previously, the JBPC was separated into three plutonic phases by Ghorbani (2014. The first plutonic phase is the main body of the complex with composition of quartz-diorite to granodiorite. After differentiation of magma in the magmatic chamber, the porphyritic and not fully consolidated magmas have intruded into the main body. Their compositions were dominantly granodiorite and granite that are defined as the second plutonic phase. Finally, the last phase was started by an intrusion of the holo- leucogranite into the previous bodies. This plutonic activity was pursued by the minor Quaternary basaltic volcanism that shows metamorphic haloes in the contacts. They are dominantly porphyric leucogranites. However, some bodies show dendritic texture that may imply the existence of silicic fluids in the latest crystallization stages. Materials and methods In this article different analysis methods were used. For example, we used a total of two hundred samples of the various granitoids that were selected for common thin section study. Forty four representative samples from the different granitic rocks were selected for whole rock chemical analyses. The analyses of both major and trace elements were performed at the Department of Earth Sciences, the University of Perugia, Italy. The analysis for all major elements was carried out by an X-ray fluorescence spectrometry (XRF using a tube completed with a Rn and W anode under conditions with acceleration voltage of 40-45 kV and electric current ranging from I=30-35 mA. After calcination of powdered

Geochemistry and Nd-Sr isotopic signatures of the Pensamiento Granitoid Complex, Rondonian-San Ignacio Province, eastern precambrian shield of Bolivia: petrogenetic constraints for a mesoproterozoic magmatic arc setting;Geoquimica e assinaturas Nd-Sr do Complexo Granitoide Pensamiento, provincia Rondoniana-San Ignacio, pre-cambriano de Bolivia Oriental: caracterizacao petrogenetica de um arco magmatico no mesoproterozoico

Energy Technology Data Exchange (ETDEWEB)

Matos, Ramiro, E-mail: rmatoss@igc.usp.b [Universidad Mayor de San Andre (UMSA), La Paz (Bolivia, Plurinational State of). Inst. de Investigaciones Geologicas y del Medio Ambiente; Teixeira, Wilson; Bettencourt, Jorge Silva, E-mail: wteixeir@usp.b, E-mail: jsbetten@usp.b [Universidade de Sao Paulo (IGC/USP), SP (Brazil). Inst. de Geociencias. Dept. de Mineralogia e Geotectonica; Geraldes, Mauro Cesar, E-mail: geraldes@uerj.b [Universidade do Estado do Rio de Janeiro (FG/UERJ), RJ (Brazil). Faculdade de Geologia

2009-07-01

The Pensamiento Granitoid Complex (PGC), located in the northern part of the eastern Precambrian shield of Bolivia, is tectonically assigned to the Rondonian-San Ignacio Province (1.55 - 1.30 Ga) of the Amazonian Craton that is made up by Archean and Proterozoic provinces. The Proterozoic ones result from accretionary orogens that become successively younger south westwards, such as the Rondonian/San Ignacio (1.37 - 1.32 Ga) and the Sunsas orogenies (1.20 - 1.00 Ga). The PGC crops out mainly on the 'Paragua craton' bounded to the south by the Sunsas belt, and composed of granites and subvolcanic terms, and subordinately of syenites, granodiorites, tonalites, trondhjemites and diorites as orogenic representatives of the Rondonian/San Ignacio Orogeny, intrusive into the Lomas Maneches (ca. 1.68 Ga) and Chiquitania (ca. 1.7 Ga) complexes. Thirteen whole rock chemical analyses for major, trace and REE elements were performed for the La Junta, San Martin, Diamantina, Porvernir, San Cristobal, Piso Firme plutons of the PGC. The negative trends of MgO, Al{sub 2}O{sub 3} and CaO contents with increasing SiO{sub 2} suggest that fractional crystallization played an important role in the petrogenesis of the investigated rocks. The data also indicate a mainly peraluminous, sub-alkaline to high-K calc-alkaline composition, and fractionated LREE/HREE patterns are consistent with a magmatic arc character for these plutons. SHRIMP U-Pb zircon ages of the La Junta and San Martin syn- to late-kinematic plutons are 1347 {+-} 21 Ma and 1373 {+-} 20 Ma respectively, and the Sm-Nd T{sub DM} model ages are between 1.9 to 2.0 Ga, while {epsilon}{sub Nd(1330)} values range from +1.8 to -4.3, respectively. In addition, the late- to post-kinematic Diamantina pluton yields SHRIMP U-Pb zircon age of 1340 {+-} 20 Ma, and variable Sm-Nd T{sub DM} model ages (1.6 to 1.9 Ga) and {epsilon}{sub Nd(1330)} values (+0.4 to -1.2) that are comparable with previous results found for other coeval

Tok-Algoma magmatic complex of the Selenga-Stanovoi Superterrain in the Central Asian fold belt: Age and tectonic setting

Science.gov (United States)

Kotov, A. B.; Larin, A. M.; Salnikova, E. B.; Velikoslavinskii, S. D.; Sorokin, A. A.; Sorokin, A. P.; Yakovleva, S. Z.; Anisimova, I. V.; Tolmacheva, E. V.

2012-05-01

According to the results of U-Pb geochronological investigations, the hornblende subalkali diorite rocks making up the Tok-Algoma Complex in the eastern part of the Selenga-Stanovoi Superterrain of the Central Asian fold belt were formed in the Middle Jurassic rather than in the Middle Archean as was suggested previously. Thus, the age of the regional amphibolite facies metamorphism manifested itself in the Ust'-Gilyui rock sequence of the Stanovoi Complex and that superimposed on granitoids of the Tok-Algoma Complex is Mesozoic rather than Early Precambrian. The geochemical features of the Tok-Algoma granitoids are indicative of the fact that they were formed in the geodynamic setting of the active continental margin or a mature island arc. Hence, it is possible to suggest that the subduction processes along the southern boundary between the Selenga-Stanovoi Superterrain and the Mongolian-Okhotsk ocean basin in the Middle Jurassic resulted in the formation of a magmatic belt of over 500 km in length.

Seismic evidence for arc segmentation, active magmatic intrusions and syn-rift fault system in the northern Ryukyu volcanic arc

Science.gov (United States)

Arai, Ryuta; Kodaira, Shuichi; Takahashi, Tsutomu; Miura, Seiichi; Kaneda, Yoshiyuki

2018-04-01

Tectonic and volcanic structures of the northern Ryukyu arc are investigated on the basis of multichannel seismic (MCS) reflection data. The study area forms an active volcanic front in parallel to the non-volcanic island chain in the eastern margin of the Eurasian plate and has been undergoing regional extension on its back-arc side. We carried out a MCS reflection experiment along two across-arc lines, and one of the profiles was laid out across the Tokara Channel, a linear bathymetric depression which demarcates the northern and central Ryukyu arcs. The reflection image reveals that beneath this topographic valley there exists a 3-km-deep sedimentary basin atop the arc crust, suggesting that the arc segment boundary was formed by rapid and focused subsidence of the arc crust driven by the arc-parallel extension. Around the volcanic front, magmatic conduits represented by tubular transparent bodies in the reflection images are well developed within the shallow sediments and some of them are accompanied by small fragments of dipping seismic reflectors indicating intruded sills at their bottoms. The spatial distribution of the conduits may suggest that the arc volcanism has multiple active outlets on the seafloor which bifurcate at crustal depths and/or that the location of the volcanic front has been migrating trenchward over time. Further distant from the volcanic front toward the back-arc (> 30 km away), these volcanic features vanish, and alternatively wide rift basins become predominant where rapid transitions from normal-fault-dominant regions to strike-slip-fault-dominant regions occur. This spatial variation in faulting patterns indicates complex stress regimes associated with arc/back-arc rifting in the northern Okinawa Trough.[Figure not available: see fulltext.

Natural tracers for identifying the origin of the thermal fluids emerging along the Aegean Volcanic arc (Greece): Evidence of Arc-Type Magmatic Water (ATMW) participation

Science.gov (United States)

Dotsika, E.; Poutoukis, D.; Michelot, J. L.; Raco, B.

2009-01-01

The Aegean volcanic arc is the result of a lithosphere subduction process during the Quaternary time. Starting from the Soussaki area, from west to east, the arc proceeds through the islands of Egina, Methana, Milos, Santorini, the Columbus Bank, Kos and Nisyros. Volcano-tectonic activities are still pronounced at Santorini and Nisyros in form of seismic activity, craters of hydrothermal explosions, hot fumaroles and thermal springs. A significant number of cold water springs emerge in the vicinity of hot waters on these islands. Chemical and isotopic analyses were applied on water and fumaroles samples collected in different areas of the volcanic arc in order to attempt the assessment of these fluids. Stable isotopes of water and carbon have been used to evaluate the origin of cold and thermal water and CO 2. Chemical solute concentrations and isotopic contents of waters show that the fluids emerging in Egina, Soussaki, Methana and Kos areas represent geothermal systems in their waning stage, while the fluids from Milos, Santorini and Nisyros proceed from active geothermal systems. The δ 2H-δ 18O-Cl - relationships suggest that the parent hydrothermal liquids of Nisyros and Milos are produced through mixing of seawater and Arc-Type Magmatic Water (ATMW), with negligible to nil contribution of local ground waters and with very high participation of the magmatic component, which is close to 70% in both sites. A very high magmatic contribution to the deep geothermal system could occur at Santorini as well, perhaps with a percentage similar to Nisyros and Milos, but it cannot be calculated because of steam condensation heavily affecting the fumarolic fluids of Nea Kameni before the surface discharge. The parent hydrothermal liquid at Methana originates through mixing of local groundwaters, seawater and ATMW, with a magmatic participation close to 19%. All in all, the contribution of ATMW is higher in the central-eastern part of the Aegean volcanic arc than in the

The contribution of the young Cretaceous Caribbean Oceanic Plateau to the genesis of late Cretaceous arc magmatism in the Cordillera Occidental of Ecuador

Science.gov (United States)

Allibon, J.; Monjoie, P.; Lapierre, H.; Jaillard, E.; Bussy, F.; Bosch, D.; Senebier, F.

2008-12-01

The eastern part of the Cordillera Occidental of Ecuador comprises thick buoyant oceanic plateaus associated with island-arc tholeiites and subduction-related calc-alkaline series, accreted to the Ecuadorian Continental Margin from Late Cretaceous to Eocene times. One of these plateau sequences, the Guaranda Oceanic Plateau is considered as remnant of the Caribbean-Colombian Oceanic Province (CCOP) accreted to the Ecuadorian Margin in the Maastrichtien. Samples studied in this paper were taken from four cross-sections through two arc-sequences in the northern part of the Cordillera Occidental of Ecuador, dated as (Río Cala) or ascribed to (Macuchi) the Late Cretaceous and one arc-like sequence in the Chogòn-Colonche Cordillera (Las Orquídeas). These three island-arcs can clearly be identified and rest conformably on the CCOP. In all four localities, basalts with abundant large clinopyroxene phenocrysts can be found, mimicking a picritic or ankaramitic facies. This mineralogical particularity, although not uncommon in island arc lavas, hints at a contribution of the CCOP in the genesis of these island arc rocks. The complete petrological and geochemical study of these rocks reveals that some have a primitive island-arc nature (MgO values range from 6 to 11 wt.%). Studied samples display marked Nb, Ta and Ti negative anomalies relative to the adjacent elements in the spidergrams characteristic of subduction-related magmatism. These rocks are LREE-enriched and their clinopyroxenes show a tholeiitic affinity (FeO T-TiO 2 enrichment and CaO depletion from core to rim within a single crystal). The four sampled cross-sections through the island-arc sequences display homogeneous initial Nd, and Pb isotope ratios that suggest a unique mantellic source for these rocks resulting from the mixing of three components: an East-Pacific MORB end-member, an enriched pelagic sediment component, and a HIMU component carried by the CCOP. Indeed, the ankaramite and Mg

5 m Gridded multibeam bathymetry of Rota Island, Commonwealth of the Northern Mariana Islands (CNMI)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Rota Island, CNMI. Bottom coverage was achieved in depths between 0 and -1905 meters; this 5-m grid has data only to -400 m. The netCDF and Arc ASCII grids include...

Late Proterozoic island-arc complexes and tectonic belts in the southern part of the Arabian Shield, Kingdom of Saudi Arabia

Science.gov (United States)

Greenwood, William R.; Stoeser, D.B.; Fleck, R.J.; Stacey, J.S.

1983-01-01

Sr ratios are not included in the appendix, but all rocks more than 660 m.y. old have initial ratios in the range 0.7021-0.7035, with only two greater than 0.7030. Thus, nothing in the Rb-Sr data suggests involvement of an older continental crust during the evolution of the southern Shield. A lead isotope study of ore minerals and potassium feldspars of the Arabian Shield by Stacey and others (1980) also suggests that no older (Archean to early Proterozoic) evolved continental-type crust underlies the southern Shield. An early summary of mapping (Schmidt and others, 1973) suggests that older sialic basement underlies the late Proterozoic layered rocks in the southern Shield. However, subsequent-mapping and the isotopic studies cited above have established that all of these rocks are of late Proterozoic age and that all rocks of the southern Shield that are more than 660 m.y. old have ensimatic or mantle isotopic characteristics. Figure 2 shows, with only two exceptions, that rocks more than 800 m.y. old are present west of the boundary separating the Tayyah and Khadra belts. The exceptions are two poorly controlled Rb-Sr ages obtained by Fleck (1980) on two quartz diorite plutons in the Malahah region (appendix 1, localities 26 and 27). Preliminary uranium-thorium zircon data of Stacey now suggest that one of these quartz diorite plutons (locality 26) has an age of approximately 640 m.y. Therefore, we prefer to discount the two dates of Fleck until further information is available. As noted earlier and as described below, most of the rocks of the southern Arabian Shield have characteristics typical of those formed in the island-arc environment by subduction-related processes. We shall refer to the group of rocks in the western part of the southern Shield, which formed from 1100 to 800 m.y. ago, as the 'older ensimatic-arc complex' and those in the eastern and northwestern parts, which formed from 800 to 690 m.y. ago, as the 'younger marginal-arc compl

Geochronology, geochemistry, and Sr-Nd-Pb-Hf isotopes of the Zhunsujihua granitoid intrusions associated with the molybdenum deposit, northern Inner Mongolia, China: implications for petrogenesis and tectonic setting

Science.gov (United States)

Zhang, Xiaojun; Lentz, David R.; Yao, Chunliang; Liu, Rui; Yang, Zhen; Mei, Yanxiong; Fan, Xianwang; Huang, Fei; Qin, Ying; Zhang, Kun; Zhang, Zhenfei

2018-03-01

The Zhunsujihua porphyry molybdenum deposit, located in northern Inner Mongolia of China that belongs to Central-Asian Orogenic Belt (CAOB), is the only Mo deposit formed in the late Carboniferous in this area so far. Its mineralization is mainly restricted to the Zhunsujihua granitoid intrusions, which are composed of the main granodiorite (GD) and crosscutting, virtually coeval minor syn-ore leucogranite (LG) and diorite porphyry (DP) dykes. LA-ICP-MS zircon U-Pb dating yields crystallization ages of 300.0 ± 2.0, 299.3 ± 2.0, and 299.0 ± 2.6 Ma for the GD, LG, and DP, respectively. The major and trace element lithogeochemical data show that the GD and LG are metaluminous to weakly peraluminous, high-K calc-alkaline series with I-type granite characteristics, strongly oxidized, with low concentrations of Ba, Nb, Sr, P, and Ti and elevated K and Rb contents, indicating typical arc magmatic features. The LG is a product derived by extensive fractional crystallization of a parental magma similar to the GD as evident from the lower Eu/Eu*, Nb/Ta, Zr/Hf, and T Zr. The moderately altered DP exhibits high concentrations of K, Rb, Cs, LREE, Y, and low Sr/Y, with a positive ɛ Nd (300 Ma), which indicates a mantle or juvenile source associated with an arc setting. The Sr-Nd-Hf isotope data show low I Sr (0.70406-0.70461) and moderate ɛ Nd (300 Ma) (-0.9 to 1.5) for the GD and LG, and relatively high ɛ Hf (300 Ma) values (-3.6 to +11.2) for the GD, suggesting the magma mainly originated from the juvenile lower crust that was derived from depleted mantle, with a minor component of ancient continental crust. Lead isotope data have characteristics of a lower crust source with minor contamination by upper crustal material. Combined with previous research, the Zhunsujihua granitoid intrusions developed in an intracontinental volcanic arc (Uliastai) associated with northward subduction of the Paleo-Asian Ocean plate during late Carboniferous to early Permian; this suggests

Magnetic anomalies over the Andaman Islands and their geological ...

Indian Academy of Sciences (India)

plate boundary zone (e.g., Gahalaut et al. 2008; ... Himalayan arc/collision system in the north and the Indonesian arc system .... prominent linear ridges, (b) geological map of the Andaman Islands (after Pal et al. 2003a) ... ophiolite rocks occur in N–S to NE–SW trending bodies. ... described above gave rise to three areas of.

Generation of Silicic Melts in the Early Izu-Bonin Arc Recorded by Detrital Zircons in Proximal Arc Volcaniclastic Rocks From the Philippine Sea

Science.gov (United States)

Barth, A. P.; Tani, K.; Meffre, S.; Wooden, J. L.; Coble, M. A.; Arculus, R. J.; Ishizuka, O.; Shukle, J. T.

2017-10-01

A 1.2 km thick Paleogene volcaniclastic section at International Ocean Discovery Program Site 351-U1438 preserves the deep-marine, proximal record of Izu-Bonin oceanic arc initiation, and volcano evolution along the Kyushu-Palau Ridge (KPR). Pb/U ages and trace element compositions of zircons recovered from volcaniclastic sandstones preserve a remarkable temporal record of juvenile island arc evolution. Pb/U ages ranging from 43 to 27 Ma are compatible with provenance in one or more active arc edifices of the northern KPR. The abundances of selected trace elements with high concentrations provide insight into the genesis of U1438 detrital zircon host melts, and represent useful indicators of both short and long-term variations in melt compositions in arc settings. The Site U1438 zircons span the compositional range between zircons from mid-ocean ridge gabbros and zircons from relatively enriched continental arcs, as predicted for melts in a primitive oceanic arc setting derived from a highly depleted mantle source. Melt zircon saturation temperatures and Ti-in-zircon thermometry suggest a provenance in relatively cool and silicic melts that evolved toward more Th and U-rich compositions with time. Th, U, and light rare earth element enrichments beginning about 35 Ma are consistent with detrital zircons recording development of regional arc asymmetry and selective trace element-enriched rear arc silicic melts as the juvenile Izu-Bonin arc evolved.

Granites and granitoids of the southern region - Granite molybdenite system

International Nuclear Information System (INIS)

Issler, R.S.

1987-01-01

Economic concentrations of molybdenum are genetically closely associated with acidic and moderately acid granitoids-granites, granodiorites, monzonites and diorites, and are located in two geotectonic settings: subduction-related and rift-related. The aim of this paper is twofold, first succinctly approach the geology, tectonic setting and chemical parameters of the 'granite molybdenite system' as defined by Mutschler and/or alcali granite porphyry bodies emplaced in the North American continent for occasion of a Mesozoic-Fanerozoic extensile event; second to relate the computer-assisted evaluation of 422 major element chemical analysis of granites and granitoids of southern region of Brazil, using chemical fingerprints (SiO 2 ≥ 74. Owt%, Na 2 O ≤ 3.6wt%, K 2 O ≥ 4.5wt%), and K 2 O/Na 2 O ratio > 1.5 developed and testified from North American and Finnish occurrences, may locate molybdenite-bearing granite bodies with high exploration potential. These techniques suggest that some late Precambrian to early Paleozoic granite-rhyolite assemblages inserted at domains of the SG. 22/23 Curitiba/Iguape, SH. 21/22 Uruguaiana/Porto Alegre and SI.22 Lagoa Mirim Sheets, have exploration potential for molybdenum. (author) [pt

An isotopic study of granitoids in the Litchfield Block, Northern Territory

International Nuclear Information System (INIS)

Page, R.W.; Bower, M.J.; Guy, D.B.

1984-01-01

The Litchfield Block contains a variety of granitoids, gneissic rocks, and migmatites that are intrusive into metasediments of probable Early Proterozoic age at the western margin of the Pine Creek Inlier. Isotopic data, which include U-Pb measurements on cogenetic zircon and xenotime and Rb-Sr total-rock measurements on the least metamorphosed granodiorites, show that these rocks crystallised from mantle-derived melts between 1840 Ma and 1850 Ma ago. Radiogenic Pb was lost from zircon in the early Palaeozoic (about 435 Ma), but xenotime remained a closed system until recent time. Many granitoids in the Litchfield Block have a gneissic fabric imposed during greenschist to amphibolite-grade regional metamorphism. This disturbance allowed partial isotopic re-equilibration of Rb-Sr total-rock systems, at about 1770 +- 16 Ma. As this igneous and metamorphic evolution is mirrored in other parts of the Pine Creek Inlier, the Halls Creek Inlier, and many other orogenic belts in northern Australia, its recognition and isotopic definition in the Litchfield Block further emphasise the magnitude and chronological integrity of this early Proterozoic tectonic event

Chemical Zoning of Feldspars in Lunar Granitoids: Implications for the Origins of Lunar Silicic Magmas

Science.gov (United States)

Mills, R. D; Simon, J. I.; Alexander, C.M. O'D.; Wang, J.; Christoffersen, R.; Rahman, Z..

2014-01-01

Fine-scale chemical and textural measurements of alkali and plagioclase feldspars in the Apollo granitoids (ex. Fig. 1) can be used to address their petrologic origin(s). Recent findings suggest that these granitoids may hold clues of global importance, rather than of only local significance for small-scale fractionation. Observations of morphological features that resemble silicic domes on the unsampled portion of the Moon suggest that local, sizable net-works of high-silica melt (>65 wt % SiO2) were present during crust-formation. Remote sensing data from these regions suggest high concentrations of Si and heat-producing elements (K, U, and Th). To help under-stand the role of high-silica melts in the chemical differentiation of the Moon, three questions must be answered: (1) when were these magmas generated?, (2) what was the source material?, and (3) were these magmas produced from internal differentiation. or impact melting and crystallization? Here we focus on #3. It is difficult to produce high-silica melts solely by fractional crystallization. Partial melting of preexisting crust may therefore also have been important and pos-sibly the primary mechanism that produced the silicic magmas on the Moon. Experimental studies demonstrate that partial melting of gabbroic rock under mildly hydrated conditions can produce high-silica compositions and it has been suggested by that partial melting by basaltic underplating is the mechanism by which high-silica melts were produced on the Moon. TEM and SIMS analyses, coordinated with isotopic dating and tracer studies, can help test whether the minerals in the Apollo granitoids formed in a plutonic setting or were the result of impact-induced partial melting. We analyzed granitoid clasts from 3 Apollo samples: polymict breccia 12013,141, crystalline-matrix breccia 14303,353, and breccia 15405,78

Some genetic aspects of hydrothermal uranium deposits in the Bakulja granitoide (Serbia)

International Nuclear Information System (INIS)

Jelenkovic, Rade

1998-01-01

This paper discusses the influence of temperature and the way of hydrothermal fluids flow in function of both the degree of tectonized granitoid and the origin of solutions, and partly the processes accompanying mineralization expressed through physico-chemical, mineralogical and mechanical alterations of the mother rock. It has been concluded that heat energy exchange is in function of: 1) petrochemical characteristic of a rock the hydrothermal fluids flow through; 2) degree of tectonization of the surrounding mineralized rocks; 3) volume and morphology of the fissured-porous space; 4) form of uranium bonding in mineral carriers; 5) degree of uranium leaching in hydrothermal solutions; 6) the way of hydrothermal fluids flow, and 7) coefficient of heat exchange expressed by distribution of heat energy within a fluid-rock system. It has also been established that contraction of granite volume results from physico-chemical processes that take place within a granitoid-hydrothermal fluid system and its quantification has been carried out. (Author)

Mafic microgranular enclave swarms in the Chenar granitoid stock, NW of Kerman, Iran: evidence for magma mingling

Science.gov (United States)

Arvin, M.; Dargahi, S.; Babaei, A. A.

2004-10-01

Mafic microgranular enclaves (MME) are common in the Early to Middle Miocene Chenar granitoid stock, northwest of Kerman, which is a part of Central Iranian Eocene volcanic belt. They occur individually and in homogeneous or heterogeneous swarms. The MME form a number of two-dimensional structural arrangements, such as dykes, small rafts, vortices, folded lens-shapes and late swarms. The enclaves are elongated, rounded to non-elongated and subrounded in shape and often show some size-sorting parallel to direction of flow. Variation in the elongation of enclaves could reflect variations in the viscosity of the enclave, the time available for enclave deformation and differential strain during flow of the host granitoid magma. The most effective mechanism in the formation of enclave swarms in the Chenar granitoid stock was velocity gradient-related convection currents in the granitoid magma chamber. Gravitational sorting and the break-up of heterogeneous dykes also form MME swarms. The MME (mainly diorite to diorite gabbro) have igneous mineralogy and texture, and are marked by sharp contacts next to their host granitoid rocks. The contact is often marked by a chilled margin with no sign of solid state deformation. Evidence of disequilibrium is manifested in feldspars by oscillatory zoning, resorbed rims, mantling and punctuated growth, together with overgrowth of clinopyroxene/amphibole on quartz crystals, the acicular habit of apatites and the development of Fe-Ti oxides along clinopyroxene cleavages. These observations suggest that the MMEs are derived from a hybrid-magma formed as a result of the intrusion of a mafic magma into the base of a felsic magma chamber. The density contrast between hybrid-magma and the overlying felsic magma was reduced by the release of dissolved fluids and the ascent of exsolved gas bubbles from the mafic magma into the hybrid zone. Further convection in the magma chamber dispersed the hybridized magma as globules in the upper parts of

Petrological mineralogical and geochemical characterization of the granitoids and fracture fillings developed in Ratones Mines (Spain)

International Nuclear Information System (INIS)

Buil Gutierrez, B.

2002-01-01

The petrological, mineralogical and geochemical characterisation of the granitoids and fracture fillings developed in the Ratones Mine (Caceres, Spain) has been done in order to understand rock-water interaction processes which control water geochemical parameters. Special interest has been devoted to the analysis and interpretation of REE patterns in the solid phase (granitoids and fracture fillings) because they constitute geochemical tracers in water-rock interaction process. Moreover, REE are considered as actinide analogues. In order to characterise the solid phase (granitoids and fracture fillings) several investigation scales (system, outcrop, whole rock, mineral and geochemical components) have been considered and different types of samples have been analysed. These factors control the methodological approach used in this investigation. The analytical methods we have used in this investigation are microscope, qualitative and semi-quantitative methods (XRD, SEM,EDAX) and quantitative methods (ICP-MS, XRF, EM, LAM-IC-MS). The bulk of the granitoids located around the Ratones Mine Belongs to the alkaline feldspar granite-sienogranite lihotype and they show a peraluminous and subalkaline pattern. From the mineralogical point of view, they are composed by quartz, K-feldspar (Or>90%), showing sericitation, moscovitization and turmolinization altherations, alkaline plagioclase (An-=-3%), usually altered to sericite, saussirite and less frequently affected by moscovitization processes, Fe-Al biotite, frequently affected by chloritization processes and sometimes replaced by muscovite, and finally muscovite (>2% celadonite and <4% paragonite) both of primary and secondary origin. The differences observed between the different lithotypes are related with the modal proportion of the principal minerals,with the presence or absence of certain accessory minerals ( turmaline, cordierite), with specific textural patterns, grain size and also with the richness in specific

Spatial distribution of helium isotopes in volcanic gases and thermal waters along the Vanuatu (New Hebrides) volcanic arc

Science.gov (United States)

Jean-Baptiste, P.; Allard, P.; Fourré, E.; Bani, P.; Calabrese, S.; Aiuppa, A.; Gauthier, P. J.; Parello, F.; Pelletier, B.; Garaebiti, E.

2016-08-01

We report the first helium isotope survey of volcanic gases, hot springs and some olivine phenocrysts along the Vanuatu island arc, from Tanna in the south to Vanua Lava in the north. Low CO2 content and low 3He/4He ratios in thermal fluids of Epi (4.0 ± 0.1 Ra), Efate (4.5 ± 0.1 Ra) and Pentecost (5.3 ± 0.5 Ra) islands coherently indicate reduced mantle gas leakage and crustal contamination by radiogenic helium on these extinct volcanic systems of the former (Pliocene) arc. Instead, presently active Vanuatu volcanoes display 3He/4He and C/3He ratios typical of subduction-related volcanic arcs: 3He/4He ratios range from 6.4 ± 0.5 Ra in southernmost Tanna and 7.23 ± 0.09 Ra in northernmost Vanua Lava to typical MORB values in the central islands of Gaua (7.68 ± 0.06 Ra), Ambrym (7.6 ± 0.8 Ra) and Ambae (7 ± 2 Ra in groundwaters, 7.9 ± 1.4 Ra in olivine phenocrysts, and 8.0 ± 0.1 Ra in summit fumaroles of Aoba volcano). On Ambrym, however, we discover that hydrothermal manifestations separated by only 10-15 km on both sides of a major E-W transverse fault zone crossing the island are fed by two distinct helium sources, with different 3He/4He signatures: while fluids in southwest Ambrym (Baiap and Sesivi areas) have typical arc ratios (7.6 ± 0.8 Ra), fluids on the northwest coast (Buama Bay area) display both higher 3He/4He ratios (9.8 ± 0.2 Ra in waters to 10.21 ± 0.08 Ra in bubbling gases) and lower C/3He ratios that evidence a hotspot influence. We thus infer that the influx of Indian MORB mantle beneath the central Vanuatu arc, from which Ambrym magmas originate, also involves a 3He-rich hotspot component, possibly linked to a westward influx of Samoan hotspot material or another yet unknown local source. This duality in magmatic He source at Ambrym fits with the bimodal composition and geochemistry of the erupted basalts, implying two distinct magma sources and feeding systems. More broadly, the wide He isotopic variations detected along the Vanuatu

Petrography and geochronology (U/Pb-Sm/Nd) the Passagem Granite, Pensamiento Granitoid Complex, Paragua Terrane, SW Amazon Craton, Mato Grosso, Brazil

International Nuclear Information System (INIS)

Jesus, Gisely Carmo de; Sousa, Maria Zelia Aguiar de; Ruiz, Amarildo Salina; Matos, Joao Batista de

2010-01-01

The Passagem granite includes stocks, plugs and dikes located in the Ricardo Franco hill - Vila Bela da Santissima Trindade region - state of Mato Grosso, central Brazil. The Passagem Granite is included in the Paragua terrane - SW Amazonian Craton. It consists of isotropic monzogranite, sienogranite and more rarely granodiorites with leucocratic dark gray to white color. These rocks range from hypidomorphic inequigranular to xenomorphic texture, fine to medium grained. Biotite is the only primary mafic present as essential phase and characterize an expanded slightly acid sequence formed by a sub-alkaline magmatism of high-potassium calc-alkaline, slightly peraluminous composition from arc magmatic tectonic environment during a post-collisional period. Mechanism of fractional crystallization of plagioclase, biotite, titanite, apatite and zircon associated with simultaneous crustal assimilation are suggested for the evolution of these rocks. The results support the hypothesis of a post-collisional magmatism in the Paragua terrane at 1284 +- 20 Ma corresponding to the crystallization age of the Passagem granite. This paper propose that Passagem Granite represents as an extension in Brazilian terrane of the Pensamiento Granitoid Complex. (author)

Geological evolution of the center-southern portion of the Guyana shield based on the geochemical, geochronological and isotopic studies of paleoproterozoic granitoids from southeastern Roraima, Brazil; Evolucao geologica da porcao centro-sul do escudo das Guianas com base no estudo geoquimico, geocronologico e isotopico dos granitoides paleoproterozoicos do sudeste de Roraima, Brasil

Energy Technology Data Exchange (ETDEWEB)

Almeida, Marcelo Esteves

2006-07-01

Granite. On the other hand, xenoliths of Martins Pereira and biotite bearing enclaves are founded in the younger, undeformed, and SiO{sub 2}-rich Igarape Azul Granite (1.89 Ga). This last and the high-K calc-alkaline Caroebe Granite (1.90-1.89 Ga, Agua Branca Suite), including coeval volcanic rocks (1.89 Ga, Jatapu volcanics) and charnockitoids (1.89 Ga, e.g. Santa Maria Enderbite), crop out in the southern UAD. This sub domain is characterized only by local and slight NE-SW ductile-brittle dextral shear zones. A-type granites such as Moderna (ca. 1.81 Ga) and Mapuera (ca. 1.87 Ga) granites, cross cut both areas of UAD. The geological mapping also identified three main types of metalotects in this region. Gold mineralization is observed in Martins Pereira-Serra Dourada granitoids (northern UAD); alluvial columbitetantalite is related to Igarape Azul granitoids (southern UAD); and amethyst is associated to pegmatites from Moderna A-type granites. The Nd-Pb isotope data suggest that all granitoids of UAD were generated by reworking of older and previous crustal sources (sialic Rhyacian-Archean and/or juvenile Transamazonian origin) and mantle input is not probably a viable model. Although the dominant process may be subduction in the early stage of NUAD evolution, post-collisional magmatism may be a significant process in the production of new continental crust in the southern UAD. It is possible that, following oceanic closure in the Anaua arc system (2.03 Ga) and subsequent collisional orogeny (1.97-1.94 Ga?), under plated mantle melts (basalt liquids) were trapped below preexisting lower crustal rocks of various compositions (e.g. granulite, metatonalites, amphibolite). The basalt liquids and subsequently melted lower crust could produced the immense volumes of granite (and volcanics) observed at 1.90-1.87 Ga. This geological picture is similar to the Tapajos Domain (TD) in the southern Amazonian Craton and suggest that both belong to the same province (Ventuari

Pukala intrusion, its age and connection to hydrothermal alteration in Orivesi, southwestern Finland

Directory of Open Access Journals (Sweden)

Matti Talikka

2005-01-01

Full Text Available The Pukala intrusion is situated in the Paleoproterozoic Svecofennian domain of the Fennoscandian Shield in the contact region between the Central Finland Granitoid Complex and the Tampere Belt. The acid subvolcanic intrusion, which is in contact or close to severalaltered domains, mainly consists of porphyritic granodiorite and trondhjemite. The Pukala intrusion was emplaced into volcanic sequence in an island-arc or fore-arc setting before or during the early stages of the main regional deformation phase of the Svecofennian orogeny. On the basis of the geochemical data, the Pukala intrusion is a peraluminous volcanic-arc granitoid. After crystallisation at 1896±3 Ma, multiphase deformation and metamorphismcaused alteration, recrystallisation, and orientation of the minerals, and tilted the intrusion steeply towards south. The 1851±5 Ma U-Pb age for titanite is connected to the late stages of the Svecofennian tectonometamorphic evolution of the region. Several hydrothermally altered domains are located in the felsic and intermediate metavolcanic rocks of the Tampere Belt within less than one kilometre south of the Pukala intrusion. Alteration is divided into three basic types: partial silica alteration, chlorite-sericite±silica alteration, and sericite alteration in shear zones. The first two types probably formed during the emplacement and crystallisation of the Pukala intrusion, and the third is linked to late shearing. Intense sericitisation and comb quartz bands in the contact of theintrusion and the altered domain at Kutemajärvi suggest that the hydrothermal system was driven by the Pukala intrusion.

CRED 40 m Gridded bathymetry of Howland Island, Pacific Remote Island Areas, Central Pacific (Arc ASCII Format)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Gridded (40 m cell size) bathymetry of the shelf and slope environments of Howland Island, Pacific Remote Island Areas, Central Pacific. Almost complete bottom...

CRED 5 m Gridded bathymetry of Jarvis Island, Pacific Remote Island Areas, Central Pacific (Arc ASCII Format)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Gridded (5 m cell size) bathymetry of the shelf and slope environments of Jarvis Island, Pacific Remote Island Areas, Central Pacific. Almost complete bottom...

CRED 40 m Gridded bathymetry of Baker Island, Pacific Remote Island Areas, Central Pacific (Arc ASCII Format)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Gridded (40 m cell size) bathymetry of the shelf and slope environments of Baker Island, Pacific Remote Island Areas, Central Pacific. Almost complete bottom...

Large-scale slope failure and active erosion occurring in the southwest Ryukyu fore-arc area

Directory of Open Access Journals (Sweden)

T. Matsumoto

2001-01-01

Full Text Available The southwestern Ryukyu area east of Taiwan Island is an arcuate boundary between Philippine Sea Plate and Eurasian Plate. The topographic features in the area are characterised by (1 a large-scale amphitheatre off Ishigaki Island, just on the estimated epicentre of the tsunamigenic earthquake in 1771, (2 lots of deep sea canyons located north of the amphitheatre, (3 15–20 km wide fore-arc basin, (4 15–20 km wide flat plane in the axial area of the trench, (5 E-W trending half grabens located on the fore-arc area, etc., which were revealed by several recent topographic survey expeditions. The diving survey by SHINKAI6500 in the fore-arc area on a spur located 120 km south of Ishigaki Island was carried out in 1992. The site is characterised dominantly by rough topography consisting of a series of steep slopes and escarpments. A part of the surface is eroded due to the weight of the sediment itself and consequently the basement layer is exposed. The site was covered with suspended particles during the diving, due to the present surface sliding and erosion. The same site was resurveyed in 1997 by ROV KAIKO, which confirmed the continuous slope failure taking place in the site. Another example that was observed by KAIKO expedition in 1997 is a largescale mud block on the southward dipping slope 80 km south of Ishigaki Island. This is apparently derived from the shallower part of the steep slope on the southern edge of the fan deposit south of Ishigaki Island. The topographic features suggest N-S or NE-SW tensional stress over the whole study area. In this sense, the relative motion between the two plates in this area is oblique to the plate boundary. So, the seaward migration of the plate boundary may occur due to the gravitational instability at the boundary of the two different lithospheric structures. This is evidenced by a lack of accretionary sediment on the fore-arc and the mechanism of a recent earthquake which occurred on 3 May 1998 in

U.S. Virgin Islands Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The 1 arc-second Virgin Islands DEM will be used to support NOAA's tsunami forecast system and for tsunami inundation modeling. This DEM encompasses the Virgin...

Geología de la parte sur de la Sierra de San Luis y granitoides asociados, Argentina

Directory of Open Access Journals (Sweden)

Llambías, E. J.

1992-12-01

Full Text Available The lower Palaeozoic basement of the southern part of Sierra de San Luis, Argentina, is made up of metamorphic rocks, granitoids and ultramafic rocks. The metamorphic grade ranges from the lower limit of greenschist facies through the upper limit of amphibolite facies, in apparent transition. The lower grade metamorphic rocks include slates, metavolcanics, metaconglomerates, quartzites and phyllites. Rocks with intermediate metamorphism are biotite-quartz-oligoclase schists with abundant pegmatoid veins. The higher grade metamorphism is represented by gneisses, amphibolites and migmatites, to which mafic and ultramafic bodies are associated. Three deformation phases have been recognized, being the last one (D3, of ordovician age, responsible of the most marked structures.The granitoids were grouped into pre-, syn- and post-kynematic bodies respect to D3. The pre-kynematic granitoids are located within the belt of lower grade metamorphic rocks and are composed of tonalites, granodiorites and monzogranites, strongly deformed. Their age is unknown. The syn-kynematic bodies are mainly garnet-moscovite-bearing leucogranodiorites. They show low thermal and rheological contrasts respect to the country rocks, and the age is 454 ± 21 m.a. The post-kynematic granitoids are mainly monzogranites with K-feldspar megacrysts and abundant sphene. They are subcircular and discordant, and are associated with an extensional regime. Their age is comprised between 423 and 320 m.a., and corresponds to the end of the Famatinian cycle.El basamento cristalino de la parte sur de la Sierra de San Luis, de edad Paleozoico Inferior, está constituido por rocas metamórficas, granitoides y rocas ultramáficas. El grado de metamorfismo varía desde la parte baja de esquistos verdes hasta la parte alta de la facies anfibolita, siendo sus relaciones de aparente transicionalidad. Las rocas con menor grado metamórfico consisten en pizarras, metavolcanitas, metaconglomerados

Physical and chemical consequences of crustal melting in fossil mature intra-oceanic arcs

Science.gov (United States)

Berger, J.; Burg, J.-P.

2012-04-01

Seismic velocity models of active intra-oceanic arcs show roots with densities and P-wave velocities intermediate to classical lower oceanic crust (density; ~3.0, Vp: ~7.0 km/s) and uppermost harzburgitic mantle (density: 3.2-3.3, Vp: 7.9-8.0 km/s). Most studies on active and fossil exhumed island arcs interpret the petrological nature of this root as ultramafic cumulates crystallized from primitive melts and/or as pyroxenites formed via basalt-peridotite reactions. Igneous cumulates and pyroxenites have densities close to or above that of uppermost mantle rocks; they can consequently undergo gravity-driven delamination, a process thought to drive the bulk composition of the arc toward an andesitic, continental crust-like composition. Dehydration and melting reactions are reported from exposed arc roots (Jijal complex in Kohistan; Amalaoulaou arc in Mali; Fiordland arc in New-Zealand). Intense influx of mantle-derived basaltic magmas at high pressure in a thickening island arc can enable lower crustal rocks to locally cross the dehydration-melting solidus of hydrous subalkaline basalts. Thermodynamic modeling using Perple_X, geochemical analysis and compilation of experimental and field data have been combined to constrain processes, conditions and consequences of intra-arc melting. The position of the solidus in a P-T grid is strongly dependent of the bulk water content: at 1 GPa, it is as low as 750 °C for water saturated hornblende-gabbros (>1 wt% H2O) and 830°C for gabbros with 0.1 wt% H2O. Incipient melting (F conditions to trigger gravity-driven delamination of the root and could lead to introduction of fertile arc garnet pyroxenites within the upper mantle. However, in Kohistan and at Amalaoulaou, the dense garnet-clinopyroxene residues are dispersed in the arc roots; they are intermingled with hornblendite and pyroxenite bodies. The small density contrast between garnet granulites and the harzburgitic mantle, and the low volumes of garnet

New monazite U-Pb age constraints on the evolution of the Paleoproterozoic Vaasa granitoid batholith, western Finland

Directory of Open Access Journals (Sweden)

A.K. Kotilainen

2016-09-01

Full Text Available The Vaasa batholith, western Finland, is a large, peraluminous granitoid pluton that crystallized at 1.88–1.87 Ga during the culmination of the Svecofennian orogeny. The batholith has gradual contacts, through metatexites and diatexites, with the enveloping metasedimentary rocks of the Bothnian Belt. We present ID-TIMS U-Pb age data on monazite from granitoids and xenoliths of the Vaasa batholith and combine these with published U–Pb zircon ages in order to shed further light on the evolution of the Vaasa batholith. The apparent monazite ages for seven of the examined samples are 1870–1863 Ma, and 1855±3 Ma for one further sample from the southern part of the batholith. Combined with pre-existing data, the monazite ages of the granitoids are 9 to 18 Ma (face values or 3 to 9 Ma (external errors considered younger than the U–Pb zircon crystallization ages from respective samples. Our new data suggest slow cooling for the Vaasa batholith – the closure/saturation temperature of the monazite U–Pb system was probably reached in ~10 m.y. after the crystallization of magmatic zircon in the examined rocks.

Temporal and spatial variations in provenance of Eastern Mediterranean Sea sediments: Implications for Aegean and Aeolian arc volcanism

NARCIS (Netherlands)

Klaver, M.; Djuly, T.; de Graaf, S.; Sakes, A.; Wijbrans, J.R.; Davies, G.R.; Vroon, P.Z.

2015-01-01

The Eastern Mediterranean Sea (EMS) is the last remnant of the Tethys Ocean that has been subducted to the north since the Jurassic. Subduction has led to the formation of multiple island arcs in the EMS region where the Aeolian and Aegean arcs are currently active. The EMS is surrounded by

The neoproterozoic Goias magmatic arc, central Brazil: a review and new Sm-Nd isotopic data

International Nuclear Information System (INIS)

Pimentel, Marcio Martins; Fuck, Reinhardt Adolfo; Gioia, Simone Maria Costa Lima

2000-01-01

In this study we review the main characteristics and geochronological/isotopic data of metaigneous rocks of the juvenile Neoproterozoic Goias Magmatic Arc in central Brazil. Some new Sm-Nd isotopic data are also presented for both the southern (Arenopolis) and northern (Mara Rosa) sections of the arc. In the south, granitoids of the Choupana-Turvania area yielded a Sm-Nd whole-rock isochron age of 863± 97 Ma and e Nd (T) of +4.1 T D M model ages vary between 0.94 and 1.13 Ga. Metavolcanic rocks in the Pontalina region have a Sm-Nd whole rock isochron age of 762 ± 77 Ma and e Nd (T) of +2.9. T DM values are between 0.96 and 1.10 Ga. In the northern section of the Goias Arc, mylonitic gneisses of the Serra Azul ridge, an important N30E shear zone, were investigated and have a Sm-Nd isochron age of 3058 ± 120 Ma and initial e Nd value of ca.+ 2.1. This data suggests that the Serra Azul ridge might represent either a mylonitized fragment of the Archaen terranes exposed just to the south, or the sialic basement of the Araguaia Belt supracrustal, along the eastern margin of the Amazon Craton. The geochronological data available so far indicate a long history of arc formation and amalgamation on the western margin of the Sao Francisco-Congo continent during the Neoproterozoic. The history of convergence of continental masses is partially coeval with the fragmentation of Rodinia, indicating that the western margin (present geographic reference) of that continent occupied a peripheral setting in the Rodinia super continent. (author)

The neoproterozoic Goias magmatic arc, central Brazil: a review and new Sm-Nd isotopic data

Energy Technology Data Exchange (ETDEWEB)

Pimentel, Marcio Martins; Fuck, Reinhardt Adolfo; Gioia, Simone Maria Costa Lima [Brasilia Univ., DF (Brazil). Inst. de Geociencias]. E-mail: marcio@unb.br

2000-03-01

In this study we review the main characteristics and geochronological/isotopic data of metaigneous rocks of the juvenile Neoproterozoic Goias Magmatic Arc in central Brazil. Some new Sm-Nd isotopic data are also presented for both the southern (Arenopolis) and northern (Mara Rosa) sections of the arc. In the south, granitoids of the Choupana-Turvania area yielded a Sm-Nd whole-rock isochron age of 863{+-} 97 Ma and e{sub Nd} (T) of +4.1 T{sub D}M model ages vary between 0.94 and 1.13 Ga. Metavolcanic rocks in the Pontalina region have a Sm-Nd whole rock isochron age of 762 {+-} 77 Ma and e{sub Nd} (T) of +2.9. T {sub DM} values are between 0.96 and 1.10 Ga. In the northern section of the Goias Arc, mylonitic gneisses of the Serra Azul ridge, an important N30E shear zone, were investigated and have a Sm-Nd isochron age of 3058 {+-} 120 Ma and initial e{sub Nd} value of ca.+ 2.1. This data suggests that the Serra Azul ridge might represent either a mylonitized fragment of the Archaen terranes exposed just to the south, or the sialic basement of the Araguaia Belt supracrustal, along the eastern margin of the Amazon Craton. The geochronological data available so far indicate a long history of arc formation and amalgamation on the western margin of the Sao Francisco-Congo continent during the Neoproterozoic. The history of convergence of continental masses is partially coeval with the fragmentation of Rodinia, indicating that the western margin (present geographic reference) of that continent occupied a peripheral setting in the Rodinia super continent. (author)

Lithospheric Contributions to Arc Magmatism: Isotope Variations Along Strike in Volcanoes of Honshu, Japan

Science.gov (United States)

Kersting; Arculus; Gust

1996-06-07

Major chemical exchange between the crust and mantle occurs in subduction zone environments, profoundly affecting the chemical evolution of Earth. The relative contributions of the subducting slab, mantle wedge, and arc lithosphere to the generation of island arc magmas, and ultimately new continental crust, are controversial. Isotopic data for lavas from a transect of volcanoes in a single arc segment of northern Honshu, Japan, have distinct variations coincident with changes in crustal lithology. These data imply that the relatively thin crustal lithosphere is an active geochemical filter for all traversing magmas and is responsible for significant modification of primary mantle melts.

The Origin of Tholeiitic and Calc-Alkaline Trends in Arc Magmas

Science.gov (United States)

Luffi, P. I.; Lee, C.

2012-12-01

It has long been recognized that tholeiitic (TH, high-Fe/Mg) and calc-alkaline (CA, low-Fe/Mg) magmatic series define the two most important igneous differentiation trends shaping Earth's crust. While oceanic crust formation at mid-ocean ridges is typically confined to a TH trend, arc magmatism at convergent margins, considered to significantly contribute to continent formation, generates both TH and CA trends. Thus, the origin of these trends - a key issue to understanding how continental crust forms - is matter of ongoing debate. Prevalent factors thought to contribute to the TH-CA duality are: 1) redox conditions (oxygen fugacity, fO2) and H2O contents in magmas, which control the onset and abundance of high-Fe/Mg oxide mineral fractionation; 2) crystallization depths that regulate the fractionating solid assemblage and thereby the solid/liquid Kd(Fe-Mg). Relying on an extensive geochemical dataset of modern arc volcanics and thermodynamic phase equilibria modeling, here we examine the validity and relative importance of these factors in arc petrogenesis. First, to discriminate igneous rocks more efficiently, we formulate an improved CA/TH index solely based on FeO-MgO systematics. We then confirm on a quantitative basis that, on regional scales, arcs formed on thick crust tend to be more calk-alkaline than those emplaced on thinner crust are, and show that the effect of fO2 on the CA/TH index in arc magmas is more significant than that of H2O. Importantly, we demonstrate that CA trends typical for continental arcs only form when crystal fractionation is accompanied by the assimilation of oxidized crustal components; in the absence of buffering oxidized assimilants fractionating magmas follow a TH trend more common in island arcs, irrespective of their H2O content and initial fO2 level. We find that high-pressure fractionation of amphibole and garnet in arc magmas occurs too late to have a significant influence on the CA/TH index; in addition, garnet-melt and

Hydrothermal influence on nearshore sediments of Kos Island, Aegean Sea

Science.gov (United States)

Megalovasilis, Pavlos; Godelitsas, Athanasios

2015-04-01

The Kos-Nisyros volcanic centre is a long-active, Plio-Pleistocene magmatic system in the subduction zone along the easternmost edge of the active Hellenic volcanic arc in the Aegean Sea. Although today there are signs of relative quiescence in volcanic activity, active onshore fumaroles and shallow-sea hydrothermal vents persist on, amongst others, the island of Kos. The present study explores the large-scale imprint of hydrothermally sourced heavy metals and nutrients on the island's coastal marine environment, based on geochemical data collected in September 2007 from hydrothermal waters and surficial nearshore sediments (Kos is severely influenced by ongoing submarine hydrothermal activity, and confirm that shallow-water sediment Fe, Mn, Zn and Pb levels are substantially higher than those of other islands along the Hellenic volcanic arc, and even exceed those of some deep-water hydrothermal vents in other world regions. Evidently, there may be significant metallic sulphide deposits of hydrothermal origin at depth beneath Kos.

Ordovician A-type granitoid magmatism on the Ceará Central Domain, Borborema Province, NE-Brazil

Science.gov (United States)

Castro, Neivaldo A.; Ganade de Araujo, Carlos E.; Basei, Miguel A. S.; Osako, Liliane S.; Nutman, Alan A.; Liu, Dunyi

2012-07-01

We present field relationships, major and trace element geochemistry and U-Pb SHRIMP and ID-TIMS geochronology of the A-type Ordovician Quintas pluton located in the Ceará Central Domain of the Borborema Province, in northeastern Brazil. This pluton presents a concentric geometry and is composed mainly of syenogranite, monzogranite, quartz syenite to quartz monzodiorite, monzogabbro and diorite. Its geochemical characteristics [SiO2 (52-70%), Na2O/K2O (1.55-0.65), Fe2O3/MgO (2.2-7.3), metaluminous to sligthly alkaline affinity, post-collisional type in (Y + Nb) × Rb diagram, and A-type affinity (Ga > 22 ppm, Nb > 20 ppm, Zn > 60 ppm), REE fractioned pattern with negative Eu anomaly] are coherent with post-collisional A2-type granitoids. However, the emplacement of this pluton is to some extent temporally associated with the deposition of the first strata of the Parnaíba intracratonic basin, attesting also to a purely anorogenic character (A1-type granitoid). The emplacement of this pluton is preceded by one of the largest known orogenesis of the planet (Neoproterozoic Pan-African/Brasiliano) and, if it is classified as an A2-type granitoid, it provides interesting constraints about how long can last A2-type magmatic activity after a major collisional episode, arguably triggered by disturbance of the underlying mantle, a topic extensively debated in the geoscience community.

Review of the geochemistry and metallogeny of approximately 1.4 Ga granitoid intrusions of the conterminous United States

Science.gov (United States)

du Bray, Edward A.; Holm-Denoma, Christopher S.; Lund, Karen; Premo, Wayne R.

2018-03-27

The conterminous United States hosts numerous volumetrically significant and geographically dispersed granitoid intrusions that range in age from 1.50 to 1.32 billion years before present (Ga). Although previously referred to as A-type granites, most are better described as ferroan granites. These granitoid intrusions are distributed in the northern and central Rocky Mountains, the Southwest, the northern midcontinent, and a swath largely buried beneath Phanerozoic cover across the Great Plains and into the southern midcontinent. These intrusions, with ages that are bimodally distributed between about 1.455–1.405 Ga and 1.405–1.320 Ga, are dispersed nonsystematically with respect to age across their spatial extents. Globally, although A-type or ferroan granites are genetically associated with rare-metal deposits, most U.S. 1.4 Ga granitoid intrusions do not contain significant deposits. Exceptions are the light rare-earth element deposit at Mountain Pass, California, and the iron oxide-apatite and iron oxide-copper-gold deposits in southeast Missouri.Most of the U.S. 1.4 Ga granitoid intrusions are composed of hornblende ± biotite or biotite ± muscovite monzogranite, commonly with prominent alkali feldspar megacrysts; however, modal compositions vary widely. These intrusions include six of the eight commonly identified subtypes of ferroan granite: alkali-calcic and calc-alkalic peraluminous subtypes; alkalic, alkali-calcic, and calc-alkalic metaluminous subtypes; and the alkalic peralkaline subtype. The U.S. 1.4 Ga granitoid intrusions also include variants of these subtypes that have weakly magnesian compositions. Extreme large-ion lithophile element enrichments typical of ferroan granites elsewhere are absent among these intrusions. Chondrite-normalized rare-earth element patterns for these intrusions have modest negative slopes and moderately developed negative europium anomalies. Their radiogenic isotopic compositions are consistent with mixing involving

Abundances of chemical elements in granitoids of different geological ages and their characteristics in China

Directory of Open Access Journals (Sweden)

Changyi Shi

2011-04-01

Full Text Available Actual granitoid analytical data of 767 composited samples are presented here. The data source is 6080 samples collected mainly from 750 large- to middle-sized granitoid bodies across China. Data from the composited samples, which includes that of 70 elements, is analyzed according to geological age — Archeozoic (Ar, Proterozoic (Pt, Eopaleozoic (Pz1, Neopaleozoic (Pz2, Mesozoic (Mz, and Cenozoic (Cz — and three major compositional varieties, e.g. alkali-feldspar granite, syenogranite and adamellite. Petrochemical parameters, trace-element content and rare-earth element (REE distributions of the different rock types and geological ages are characterized, and change tendencies through Archean to Cenozoic time are recorded. The comprehensive analytical data presented here has not been previously published. This significant data set can be used as fundamental information in studies of basic China geology, magma petrogenesis, ore exploration and geochemistry.

Geological evolution of the center-southern portion of the Guyana shield based on the geochemical, geochronological and isotopic studies of paleoproterozoic granitoids from southeastern Roraima, Brazil

International Nuclear Information System (INIS)

Almeida, Marcelo Esteves

2006-01-01

Granite. On the other hand, xenoliths of Martins Pereira and biotite bearing enclaves are founded in the younger, undeformed, and SiO 2 -rich Igarape Azul Granite (1.89 Ga). This last and the high-K calc-alkaline Caroebe Granite (1.90-1.89 Ga, Agua Branca Suite), including coeval volcanic rocks (1.89 Ga, Jatapu volcanics) and charnockitoids (1.89 Ga, e.g. Santa Maria Enderbite), crop out in the southern UAD. This sub domain is characterized only by local and slight NE-SW ductile-brittle dextral shear zones. A-type granites such as Moderna (ca. 1.81 Ga) and Mapuera (ca. 1.87 Ga) granites, cross cut both areas of UAD. The geological mapping also identified three main types of metalotects in this region. Gold mineralization is observed in Martins Pereira-Serra Dourada granitoids (northern UAD); alluvial columbitetantalite is related to Igarape Azul granitoids (southern UAD); and amethyst is associated to pegmatites from Moderna A-type granites. The Nd-Pb isotope data suggest that all granitoids of UAD were generated by reworking of older and previous crustal sources (sialic Rhyacian-Archean and/or juvenile Transamazonian origin) and mantle input is not probably a viable model. Although the dominant process may be subduction in the early stage of NUAD evolution, post-collisional magmatism may be a significant process in the production of new continental crust in the southern UAD. It is possible that, following oceanic closure in the Anaua arc system (2.03 Ga) and subsequent collisional orogeny (1.97-1.94 Ga?), under plated mantle melts (basalt liquids) were trapped below preexisting lower crustal rocks of various compositions (e.g. granulite, metatonalites, amphibolite). The basalt liquids and subsequently melted lower crust could produced the immense volumes of granite (and volcanics) observed at 1.90-1.87 Ga. This geological picture is similar to the Tapajos Domain (TD) in the southern Amazonian Craton and suggest that both belong to the same province (Ventuari-Tapajos or

Magnetization strucrure of thermal vent on island arc from vector magnetic anomlies using AUV

Science.gov (United States)

Isezaki, N.; Matsuo, J.; Sayanagi, K.

2012-04-01

The geomagnetic anomaly measured by a scalar magnetometer,such as a proton precession magnetometer cannot be defined its direction, then it does not satisfy the Laplace's equation. Therefore physical formula describing the relation between magnetic field and magnetization cannot be established.Because the difference between results obtained from scalar data and from vector data is very significant, we must use vector magnetic field data for magnetization analyses to get the more reliable and exact solutions. The development program of fundamental tools for exploration of deep seabed resources started with the financial support of the Ministry of Education, Culture, Sports, Science & Technology (MEXT) in 2008 and will end in 2012. In this project, we are developing magnetic exploration tools for seabed resources using AUV (Autonomous Underwater Vehicle) and other deep-towed vehicles to measure not the scalar magnetic field but the vector magnetic field in order to estimate magnetization structure below the sea-floor exactly and precisely. We conducted AUV magnetic survey in 2010 at the thermal area called Hakurei deposit in the Bayonnaise submarine caldera at the southern end of Izu island arc, about 400km south of Tokyo. We analyzed the observed vector magnetic fields to get the vector magnetic anomaly Fields using the method of Isezaki(1984). We inverted these vector magnetic anomaly fields to magnetization structure. CONCLUSIONS 1.The scalar magnetic field TIA (Total Intensity Anomaly) has no physical formula describing the relation between M (Magnetization) and TIA because TIA does not satisfy the Laplace's equation. Then it is impossible to estimate M from TIA. 2.Anlyses of M using TIA have been done so far under assumption TIA=PTA (Projected Total Anomay on MF (Main Geomagnetic Field)), however, which caused the analysis error due to ɛT= TIA - PTA . 3.We succeeded to measure the vector magnetic anomaly fields using AUV despite the severe magnetic noises

Molybdenite Re/Os dating, zircon U-Pb age and geochemistry of granitoids in the Yangchuling porphyry W-Mo deposit (Jiangnan tungsten ore belt), China: Implications for petrogenesis, mineralization and geodynamic setting

Science.gov (United States)

Mao, Jingwen; Xiong, Bikang; Liu, Jun; Pirajno, Franco; Cheng, Yanbo; Ye, Huishou; Song, Shiwei; Dai, Pan

2017-08-01

) in the north, as well as the Southeastern Coast porphyry-skarn Cu-Mo-Au ore belt (SCB) recognized in South China in this paper, we propose that the latest Jurassic to earliest Cretaceous granitoids and associated ores were formed during a tearing of the subducting Izanagi slab. This tearing of the subduction slab caused the upwelling of asthenosphere and the resulting mantle-crust interaction. The granitoid-related W ore systems in JNB resulted from the remelting of the Proterozoic crust. The mafic-ultramafic volcanic rocks of the Shuangqiaoshan Group intercalated with phyllite and slate, ophiolitic mélange and magmatic arc rocks, mainly comprising I-type granite, basalt, andesite, rhyolite, pyroclastics, together with subduction-related metasomatized lithospheric mantle, would have provided additional mantle material. In this case, the partial melting of rocks of the Shuangqiaoshan Group can produce S-, I- and transitional type granitoids. After strong differentiation it formed tungsten-bearing granitoids characterized by enrichment of high alkali, silicon and volatile components. In the Yangchuling mine area the small monzogranitic porphyry stock has stronger fractionation, volatile content and ore-forming components than the older granodiorite, resulting in the development of the porphyry W-Mo ore system.

Diversity, origin and tectonic significance of the Mesoarchean granitoids of Ourilândia do Norte, Carajás province (Brazil)

Science.gov (United States)

da Silva, Luciano Ribeiro; de Oliveira, Davis Carvalho; dos Santos, Maria Nattânia Sampaio

2018-03-01

This study investigates the diversity, origin and tectonic significance of the Ourilândia do Norte Mesoarchean granitoids, emplaced near Rio Maria-Carajás domains boundary, southeastern Amazonian Craton (Brazil). In this area, previous works has identified sanukitoids (∼2.87 Ga), (quartz) diorites of BADR affinity and undifferentiated leucogranites, with charnockites cross-cutting the other granitoids. New geological mapping data allowed to differentiate three new groups of granitoids: (i) biotite monzogranites (BMzG); (ii) epidote-biotite granodiorites (EBGd); and (iii) porphyritic granitoids (pGrt). Thus, this paper aims to define their classification, nature, formation processes and deformation aspects, and discuss the relations between plutonism and deformation for the Ourilandia do Norte granitoids. The petrographic data showed that each one of these groups can be subdivided into two facies. The BMzG is differentiated into equigranular (eBMzG) and heterogranular (hBMzG) and the EBGd into heterogranular (hEBGd) and sparsely porphyritic (spTEBGd). These granitoids constitute two batholiths separated by a rock strip of sanukitoid and BADR affinities. Both are largely dominated by BMzG rocks, with less abundant EBGd lenses. The pGrt is individualized in porphyritic granodiorites (pBHGd) and trondhjemites (pEBTd), which occur as smaller bodies. Structurally, the central portions these plutons represent lower strain domains, while their borders are marked by large-scale shear zones, where occur submagmatic and mylonitic fabrics of ENE-WSW main direction and subvertical dip, respectively. The meso- and microstructural data indicate that the rocks studied are syn-to late-tectonic and were affected by high temperature deformation (>500 °C) and low differential stress, in a sinistral transpression regime, indicating that both fabrics are related to the a same deformational event. Geochemically, except the pEBTd facies that has sodic affinity, the Ourilândia do

Geology and geochronology of Cardoso Island, in the southeastern coast of Sao Paulo State; Geologia e geocronologia da Ilha de Cardoso, sudeste do Estado de Sao Paulo

Energy Technology Data Exchange (ETDEWEB)

Weber, Werner

1998-07-01

This aim of work is the geological and geochronological study of rocks cropping out on Cardoso Island, on the southeastern coast of Sao Paulo States, close to be boundary with Parana State. The Island with an area of about 151 km{sup 2} is a protected area administered by the Forest Institute of Environment Secretariat of the State of Sao Paulo. It is mountanious, with a peak at 814 m, and is covered by dense Mata Atlantica vegetation. The terrains which compose the island are mainly an igneous complex with light grey leucocratic, inequigranular, medium - to coarse-grained syenites. The predominant Tres Irmaos Syenite (STI), composed of pyroxene, hornblende, and perthitic to mesoperthitic microcline, has a magmatic flow structures, and is cut by the Cambriu alkali-feldspar Granites (GC), which is pinkish grey, leucocratic and medium-grained. Geochemical analysis of STI and GC demonstrate their meta luminous alkaline nature and late-orogenic to an orogenic character. The geochronological results suggest that the bodies were formed between 620 and 570 My according to the U-Pb method in zircons, with cooling between 597 and 531 My (K-Ar in amphiboles). Whole rock Sm-Nd analysis yield T{sub DM} ages in the Meso and Paleoproterozoic (1.200 - 2.200 My). belt of low grade meta sedimentary rocks occurs in the northern part of the island. Quartz schist, quartz-mica schist and mica-quartz schist, often containing andaluzite and cordierite, predominate. The geochemical and geochronological data suggest that the sources of the metasediments were andesites of continental arc whose protolities separated from the mantle during the Paleoproterozoic, between 1.800 and 2.200 My. These metasediments probably continue on the continent in the Taquari region and extend southwards in narrow strips between the granitoids of the Paranagua Domain. Although quaternary deposits are expressive, they were not studied in details since they were not the objectives of this study. (author)

Geology and geochemistry of epithermal precious metal vein systems in the intra-oceanic arcs of Palau and Yap, western Pacific

Science.gov (United States)

Rytuba, J.J.; Miller, W.R.

1990-01-01

The Palau and Yap arcs are part of an intra-oceanic island-arc-trench system which separates the Pacific and Philippine plates in the western Pacific Ocean. The 350-km-long Palau arc consists of over 200 islands while the 400-km-long Yap arc located to the north has only four major islands exposed. Four of the largest islands in Palau are composed primarily of early Eocene to mid-Miocene volcanic rocks and the four islands comprising Yap contain only Miocene volcanic rocks. Basalt and basaltic andesites of the Babelthuap Formation are the oldest volcanic rocks in Palau and are characterized by high MgO, Ni and Cr and low TiO2 and have a boninitic affinity. They form the central and southeastern parts of Babelthuap Island. Oligocene arc tholeiite flows having an age of 34-35.5 Ma comprise most of the three smaller volcanic islands in Palau and the western part of Babelthuap. The youngest volcanic rocks are dacitic intrusions having an age of 22.7-23.2 Ma. The Yap arc is unusual in that metamorphic rocks up to amphibolite grade form most of the islands. These are underlain by a melange composed of igneous and volcanic clasts as well as clasts from a dismembered copper-gold skarn deposit. Miocene volcanic rocks consisting of flows and volcaniclastic deposits overlie the melange and metamorphic complex. An epithermal precious-metal vein system hosted by flows and flow breccias of the Babelthuap Formation occurs in an area 1.5 km by 1 km on the southeast side of Babelthuap Island. Over 50 veins and mineralized breccias ranging up to 2 m in width and having a strike length up to 500 m contain from trace to 13.0 ppm gold. The veins consist of quartz with varying amounts of sulfides and iron oxides after sulfides and the mineralized breccias consist of brecciated country rock cemented by quartz and iron oxides after sulfides. The veins and mineralized breccias generally dip within 15?? of vertical and have two preferred orientations, north-northwest and north

Petrotectonic characteristics, geochemistry, and U-Pb geochronology of Jurassic plutons in the Upper Magdalena Valley-Colombia: Implications on the evolution of magmatic arcs in the NW Andes

Science.gov (United States)

Rodríguez, G.; Arango, M. I.; Zapata, G.; Bermúdez, J. G.

2018-01-01

Field, petrographic, and geochemical characterization along with U-Pb zircon geochronology of the Jurassic plutons exposed in the Upper Magdalena Valley (Colombia) allowed recognizing distinct western and eastern suites formed in at least three magmatic pulses. The western plutons crop out between the eastern flank of the Central Cordillera and the Las Minas range, being limited by the Avirama and the Betania-El Agrado faults. The western suite comprises a quartz monzonite - quartz monzodiorite - quartz diorite series and subordinate monzogranites. Chemically, the rocks are high-K calc-alkaline I-type granitoids (some reaching the shoshonitic series) with metaluminous of magnesium affinity. Trace-element tectonic discrimination is consistent with magmatism in a continental arc environment. Most rocks of this suite crystallized between 195 and 186 Ma (Early Jurassic, Pliensbachian), but locally some plutons yielded younger ages between 182 and 179 Ma (Early Jurassic, Toarcian). The eastern suite crops out in the eastern margin of the Upper Magdalena Valley, east of the Betania - El Agrado fault. Plutons of this unit belong to the monzogranite series with rock types ranging between syenogranites and granodiorites. They are high-K calc-alkaline continental granitoids, some metaluminous and some peraluminous, related to I-type granites generated in a volcanic arc. Crystallization of the suite was between 173 and 169 Ma (Middle Jurassic, Aalenian-Bajocian), but locally these rocks contain zircon with earlier inherited ages related to the magmatic pulse of the western suite between 182 and 179 Ma (Early Jurassic, Toarcian). The evolution of the Jurassic plutons in the Upper Magdalena Valley is best explained by onset or increase in subduction erosion of the accretionary prism. This explains the eastward migration of the arc away from the trench. Subduction of prism sediments increased the water flux from the subducting slab, decreasing solidus temperatures, therefore

Geodynamic controls on the contamination of Cenozoic arc magmas in the southern Central Andes: Insights from the O and Hf isotopic composition of zircon

Science.gov (United States)

Jones, Rosemary E.; Kirstein, Linda A.; Kasemann, Simone A.; Dhuime, Bruno; Elliott, Tim; Litvak, Vanesa D.; Alonso, Ricardo; Hinton, Richard

2015-09-01

Subduction zones, such as the Andean convergent margin of South America, are sites of active continental growth and crustal recycling. The composition of arc magmas, and therefore new continental crust, reflects variable contributions from mantle, crustal and subducted reservoirs. Temporal (Ma) and spatial (km) variations in these contributions to southern Central Andean arc magmas are investigated in relation to the changing plate geometry and geodynamic setting of the southern Central Andes (28-32° S) during the Cenozoic. The in-situ analysis of O and Hf isotopes in zircon, from both intrusive (granitoids) and extrusive (basaltic andesites to rhyolites) Late Cretaceous - Late Miocene arc magmatic rocks, combined with high resolution U-Pb dating, demonstrates distinct across-arc variations. Mantle-like δ18O(zircon) values (+5.4‰ to +5.7‰ (±0.4 (2σ))) and juvenile initial εHf(zircon) values (+8.3 (±0.8 (2σ)) to +10.0 (±0.9 (2σ))), combined with a lack of zircon inheritance suggests that the Late Cretaceous (∼73 Ma) to Eocene (∼39 Ma) granitoids emplaced in the Principal Cordillera of Chile formed from mantle-derived melts with very limited interaction with continental crustal material, therefore representing a sustained period of upper crustal growth. Late Eocene (∼36 Ma) to Early Miocene (∼17 Ma) volcanic arc rocks present in the Frontal Cordillera have 'mantle-like' δ18O(zircon) values (+4.8‰ (±0.2 (2σ) to +5.8‰ (±0.5 (2σ))), but less radiogenic initial εHf(zircon) values (+1.0 (±1.1 (2σ)) to +4.0 (±0.6 (2σ))) providing evidence for mixing of mantle-derived melts with the Late Paleozoic - Early Mesozoic basement (up to ∼20%). The assimilation of both Late Paleozoic - Early Mesozoic Andean crust and a Grenville-aged basement is required to produce the higher than 'mantle-like' δ18O(zircon) values (+5.5‰ (±0.6 (2σ) to +7.2‰ (±0.4 (2σ))) and unradiogenic, initial εHf(zircon) values (-3.9 (±1.0 (2σ)) to +1.6 (±4.4 (2�

Geophysical imaging of buried volcanic structures within a continental back-arc basin

DEFF Research Database (Denmark)

Stratford, Wanda Rose; Stern, T.A.

2008-01-01

Hidden beneath the ~2 km thick low-velocity volcaniclastics on the western margin of the Central Volcanic Region, North Island, New Zealand, are two structures that represent the early history of volcanic activity in a continental back-arc. These ~20×20 km structures, at Tokoroa and Mangakino, fo...

Crustal evolution of Eocene paleo arc around Ogasawara region obtained by seismic reflection survey

Science.gov (United States)

Yamashita, M.; Takahashi, N.; Kodaira, S.; Miura, S.; Ishizuka, O.; Tatsumi, Y.

2011-12-01

The Izu-Bonin (Ogasawara)-Mariana (IBM) arc is known to the typical oceanic island arc, and it is the most suitable area to understand the growth process of island arc. The existence of two paleo arc which consists of Oligocene and Eocene paleo age is known in IBM forearc region by geological and geophysical studies. The Ogasawara ridge is also known to locate the initial structure of arc evolution from geologic sampling of research submersible. In this region, IODP drilling site: IBM-2 is proposed in order to understand the temporal and spatial change in arc crust composition from 50 to 40Ma magmatism. Site IBM-2 consists of two offset drilling holes (BON-1, BON-2). BON-1 designed to first encounter forearc basalt and will reach the sheeted dykes. BON-2 will start in boninites and finish in fore arc basalts. The purpose of these drilling is sampling the full volcanic stratigraphy from gabbro to boninite. There is no seismic data around BON-1 and BON-2, therefore it is need to conduct the multi-channel seismic reflection survey. Japan Agency for Marine-Earth Science and Technology carried out multi-channel seismic reflection survey and wide-angle reflection survey using 7,800 cu.in. air gun, 5 km streamer with 444 ch hydrophones and 40 OBSs in March 2011. We obtained two seismic reflection profiles of lines KT06 and KT07 along the paleo arc around Ogasawara ridge. Line KT06 located the north side of Ogasawara ridge. Line KT07 located the trench side of Ogasawara ridge. Lines KT06 is also deployed the OBSs every 5 km interval. Thin sediments are covered with basement in both survey lines. There are some sediment filled in depression topography. The low-frequency reflection from the top of subducting Pacific plate is recognized in line KT06. The continuity of this reflection is not clear due to the complicated bathymetry. The displacement of basement in northern side of Ogasawara ridge is identified along the lineament of bathymetry in Line 06. This structure is

Les granitoïdes hercyniens post-collisionnels du Maroc oriental : une province magmatique calco-alcaline à shoshonitiqueThe post-collisional Hercynian granitoids from eastern Morocco: a calc-alkaline to shoshonitic magmatic province

Science.gov (United States)

El Hadi, Hassan; Tahiri, Abdelfatah; Reddad, Aicha

2003-11-01

The post-collisional Hercynian granitoids crop out in the easternmost part of the Moroccan Hercynian belt. Petrographical and geochemical studies show a composition similarity in the various granitoids. The granitoids belong to per-aluminous and metaluminous magmatic associations. They have evolved according to a scheme similar to high-K calc-alkaline to shoshonitic associations. To cite this article: H. El Hadi et al., C. R. Geoscience 335 (2003).

Ancient xenocrystic zircon in young volcanic rocks of the southern Lesser Antilles island arc

Science.gov (United States)

Rojas-Agramonte, Yamirka; Williams, Ian S.; Arculus, Richard; Kröner, Alfred; García-Casco, Antonio; Lázaro, Concepción; Buhre, Stephan; Wong, Jean; Geng, Helen; Echeverría, Carlos Morales; Jeffries, Teresa; Xie, Hangqian; Mertz-Kraus, Regina

2017-10-01

The Lesser Antilles arc is one of the best global examples in which to examine the effects of the involvement of subducted sediment and crustal assimilation in the generation of arc crust. Most of the zircon recovered in our study of igneous and volcaniclastic rocks from Grenada and Carriacou (part of the Grenadines chain) is younger than 2 Ma. Within some late Paleogene to Neogene ( 34-0.2 Ma) lavas and volcaniclastic sediments however, there are Paleozoic to Paleoarchean ( 250-3469 Ma) xenocrysts, and Late Jurassic to Precambrian zircon ( 158-2667 Ma) are found in beach and river sands. The trace element characteristics of zircon clearly differentiate between different types of magmas generated in the southern Lesser Antilles through time. The zircon population from the younger arc (Miocene, 22-19 Ma, to Present) has minor negative Eu anomalies, well-defined positive Ce anomalies, and a marked enrichment in heavy rare earth elements (HREE), consistent with crystallization from very oxidized magmas in which Eu2 + was in low abundance. In contrast, zircon from the older arc (Eocene to mid-Oligocene, 30-28 Ma) has two different REE patterns: 1) slight enrichment in the light (L)REE, small to absent Ce anomalies, and negative Eu anomalies and 2) enriched High (H)REE, positive Ce anomalies and negative Eu anomalies (a similar pattern is observed in the xenocrystic zircon population). The combination of positive Ce and negative Eu anomalies in the zircon population of the older arc indicates crystallization from magmas that were variably, but considerably less oxidized than those of the younger arc. All the igneous zircon has positive εHf(t), reflecting derivation from a predominantly juvenile mantle source. However, the εHf(t) values vary significantly within samples, reflecting considerable Hf isotopic heterogeneity in the source. The presence of xenocrystic zircon in the southern Lesser Antilles is evidence for the assimilation of intra-arc crustal sediments and

St. Croix, U.S. Virgin Islands Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The 1/3 arc-second St. Croix, U.S. Virgin Islands Coastal Digital Elevation Model will be used to support NOAA's tsunami forecast system and for tsunami inundation...

Contrasting sedimentary processes along a convergent margin: the Lesser Antilles arc system

Science.gov (United States)

Picard, Michel; Schneider, Jean-Luc; Boudon, Georges

2006-12-01

Sedimentation processes occurring in an active convergent setting are well illustrated in the Lesser Antilles island arc. The margin is related to westward subduction of the North and/or the South America plates beneath the Caribbean plate. From east to west, the arc can be subdivided into several tectono-sedimentary depositional domains: the accretionary prism, the fore-arc basin, the arc platform and inter-arc basin, and the Grenada back-arc basin. The Grenada back-arc basin, the fore-arc basin (Tobago Trough) and the accretionary prism on the east side of the volcanic arc constitute traps for particles derived from the arc platform and the South American continent. The arc is volcanically active, and provides large volumes of volcaniclastic sediments which accumulate mainly in the Grenada basin by volcaniclastic gravity flows (volcanic debris avalanches, debris flows, turbiditic flows) and minor amounts by fallout. By contrast, the eastern side of the margin is fed by ash fallout and minor volcaniclastic turbidites. In this area, the dominant component of the sediments is pelagic in origin, or derived from South America (siliciclastic turbidites). Insular shelves are the locations of carbonate sedimentation, such as large platforms which develop in the Limestone Caribbees in the northern part of the margin. Reworking of carbonate material by turbidity currents also delivers lesser amounts to eastern basins of the margin. This contrasting sedimentation on both sides of the arc platform along the margin is controlled by several interacting factors including basin morphology, volcanic productivity, wind and deep-sea current patterns, and sea-level changes. Basin morphology appears to be the most dominant factor. The western slopes of the arc platform are steeper than the eastern ones, thus favouring gravity flow processes.

Progressive enrichment of arc magmas caused by the subduction of seamounts under Nishinoshima volcano, Izu-Bonin Arc, Japan

Science.gov (United States)

Sano, Takashi; Shirao, Motomaro; Tani, Kenichiro; Tsutsumi, Yukiyasu; Kiyokawa, Shoichi; Fujii, Toshitsugu

2016-06-01

The chemical composition of intraplate seamounts is distinct from normal seafloor material, meaning that the subduction of seamounts at a convergent margin can cause a change in the chemistry of the mantle wedge and associated arc magmas. Nishinoshima, a volcanic island in the Izu-Bonin Arc of Japan, has been erupting continuously over the past 2 years, providing an ideal opportunity to examine the effect of seamount subduction on the chemistry of arc magmas. Our research is based on the whole-rock geochemistry and the chemistry of minerals within lavas and air-fall scoria from Nishinoshima that were erupted before 1702, in 1973-1974, and in 2014. The mineral phases within the analyzed samples crystallized under hydrous conditions (H2O = 3-4 wt.%) at temperatures of 970 °C-990 °C in a shallow (3-6 km depth) magma chamber. Trace element data indicate that the recently erupted Nishinoshima volcanics are much less depleted in the high field strength elements (Nb, Ta, Zr, Hf) than other volcanics within the Izu-Bonin Arc. In addition, the level of enrichment in the Nishinoshima magmas has increased in recent years, probably due to the addition of material from HIMU-enriched (i.e., high Nb/Zr and Ta/Hf) seamounts on the Pacific Plate, which is being subducted westwards beneath the Philippine Sea Plate. This suggests that the chemistry of scoria from Nishinoshima volcano records the progressive addition of components derived from subducted seamounts.

Transient crustal movement in the northern Izu-Bonin arc starting in 2004: A large slow slip event or a slow back-arc rifting event?

Science.gov (United States)

Arisa, Deasy; Heki, Kosuke

2016-07-01

The Izu-Bonin arc lies along the convergent boundary where the Pacific Plate subducts beneath the Philippine Sea Plate. Horizontal velocities of continuous Global Navigation Satellite System stations on the Izu Islands move eastward by up to 1 cm/year relative to the stable part of the Philippine Sea Plate suggesting active back-arc rifting behind the northern part of the arc. Here, we report that such eastward movements transiently accelerated in the middle of 2004 resulting in 3 cm extra movements in 3 years. We compare three different mechanisms possibly responsible for this transient movement, i.e. (1) postseismic movement of the 2004 September earthquake sequence off the Kii Peninsula far to the west, (2) a temporary activation of the back-arc rifting to the west dynamically triggered by seismic waves from a nearby earthquake, and (3) a large slow slip event in the Izu-Bonin Trench to the east. By comparing crustal movements in different regions, the first possibility can be shown unlikely. It is difficult to rule out the second possibility, but current evidence support the third possibility, i.e. a large slow slip event with moment magnitude of 7.5 may have occurred there.

Depleted arc volcanism in the Alboran Sea and shoshonitic volcanism in Morocco: geochemical and isotopic constraints on Neogene tectonic processes

Science.gov (United States)

Gill, R. C. O.; Aparicio, A.; El Azzouzi, M.; Hernandez, J.; Thirlwall, M. F.; Bourgois, J.; Marriner, G. F.

2004-12-01

Samples of volcanic rocks from Alborán Island, the Alboran Sea floor and from the Gourougou volcanic centre in northern Morocco have been analyzed for major and trace elements and Sr-Nd isotopes to test current theories on the tectonic geodynamic evolution of the Alboran Sea. The Alborán Island samples are low-K tholeiitic basaltic andesites whose depleted contents of HFS elements (˜0.5×N-MORB), especially Nb (˜0.2×N-MORB), show marked geochemical parallels with volcanics from immature intra-oceanic arcs and back-arc basins. Several of the submarine samples have similar compositions, one showing low-Ca boninite affinity. 143Nd/ 144Nd ratios fall in the same range as many island-arc and back-arc basin samples, whereas 87Sr/ 86Sr ratios (on leached samples) are somewhat more radiogenic. Our data point to active subduction taking place beneath the Alboran region in Miocene times, and imply the presence of an associated back-arc spreading centre. Our sea floor suite includes a few more evolved dacite and rhyolite samples with ( 87Sr/ 86Sr) 0 up to 0.717 that probably represent varying degrees of crustal melting. The shoshonite and high-K basaltic andesite lavas from Gourougou have comparable normalized incompatible-element enrichment diagrams and Ce/Y ratios to shoshonitic volcanics from oceanic island arcs, though they have less pronounced Nb deficits. They are much less LIL- and LREE-enriched than continental arc analogues and post-collisional shoshonites from Tibet. The magmas probably originated by melting in subcontinental lithospheric mantle that had experienced negligible subduction input. Sr-Nd isotope compositions point to significant crustal contamination which appears to account for the small Nb anomalies. The unmistakable supra-subduction zone (SSZ) signature shown by our Alboran basalts and basaltic andesite samples refutes geodynamic models that attribute all Neogene volcanism in the Alboran domain to decompression melting of upwelling asthenosphere

Sedimentary architecture of a Plio-Pleistocene proto-back-arc basin: Wanganui Basin, New Zealand

Science.gov (United States)

Proust, Jean-Noël; Lamarche, Geoffroy; Nodder, Scott; Kamp, Peter J. J.

2005-11-01

The sedimentary architecture of active margin basins, including back-arc basins, is known only from a few end-members that barely illustrate the natural diversity of such basins. Documenting more of these basins types is the key to refining our understanding of the tectonic evolution of continental margins. This paper documents the sedimentary architecture of an incipient back-arc basin 200 km behind the active Hikurangi subduction margin, North Island, New Zealand. The Wanganui Basin (WB) is a rapidly subsiding, Plio-Pleistocene sedimentary basin located at the southern termination of the extensional back-arc basin of the active Central Volcanic Region (TVZ). The WB is asymmetric with a steep, thrust-faulted, outer (arc-ward) margin and a gentle inner (craton-ward) margin. It contains a 4-km-thick succession of Plio-Pleistocene sediments, mostly lying offshore, composed of shelf platform sediments. It lacks the late molasse-like deposits derived from erosion of a subaerial volcanic arc and basement observed in classical back-arc basins. Detailed seismic stratigraphic interpretations from an extensive offshore seismic reflection data grid show that the sediment fill comprises two basin-scale mega-sequences: (1) a Pliocene (3.8 to 1.35 Ma), sub-parallel, regressive "pre-growth" sequence that overtops the uplifted craton-ward margin above the reverse Taranaki Fault, and (2) a Pleistocene (1.35 Ma to present), divergent, transgressive, "syn-growth" sequence that onlaps: (i) the craton-ward high to the west, and (ii) uplifted basement blocks associated with the high-angle reverse faults of the arc-ward margin to the east. Along strike, the sediments offlap first progressively southward (mega-sequence 1) and then southeastward (mega-sequence 2), with sediment transport funnelled between the craton- and arc-ward highs, towards the Hikurangi Trough through the Cook Strait. The change in offlap direction corresponds to the onset of arc-ward thrust faulting and the rise of

CRED 20m Gridded bathymetry of Necker Island, Hawaii, USA (Arc ASCII format)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Gridded bathymetry of the shelf and slope environments of Necker Island, Northwestern Hawaiian Islands, Hawaii, USA. This ASCII includes multibeam bathymetry from...

A-type granitoid in Hasansalaran complex, northwestern Iran: Evidence for extensional tectonic regime in northern Gondwana in the Late Paleozoic

Science.gov (United States)

Azizi, Hossein; Kazemi, Tahmineh; Asahara, Yoshihiro

2017-07-01

The Hasansalaran plutonic complex is one of the main intrusive bodies with a wide range of granite, monzonite, diorite and syenite that crop out in northwest Iran. This body includes Paleozoic granitoids that are surrounded and cut by Cretaceous granitoids. Zircon U-Pb age dating shows that the crystallization of this body occurred at 360 Ma ago in the Early Carboniferous. Whole rock compositions of the investigated intrusive body, show high contents of Ga (11.1-76.3 ppm), Zr (73.5-1280 ppm), Zn (43.7-358 ppm), Y(17.9-177 ppm), enrichment of rare earth elements (REEs) together with high Ga/Al ratios and a strong Eu negative anomaly, fairly consistent with typical A-type signature. The low εNd(t = 360 Ma) value (model for evolution of northwest Iran in the Late Paleozoic. Based on our model, the upwelling of a mantle plume, probably due to the proto-Tethys oceanic rollback activity beneath northern Gondwana, had a crucial role in the uplifting of the continental crust and resulted in the crystallization of A-type granitoids with some gabbroic rocks in northwest Iran.

Impacts of continental arcs on global carbon cycling and climate

Science.gov (United States)

Lee, C. T.; Jiang, H.; Carter, L.; Dasgupta, R.; Cao, W.; Lackey, J. S.; Lenardic, A.; Barnes, J.; McKenzie, R.

2017-12-01

On myr timescales, climatic variability is tied to variations in atmospheric CO2, which in turn is driven by geologic sources of CO2 and modulated by the efficiency of chemical weathering and carbonate precipitation (sinks). Long-term variability in CO2 has largely been attributed to changes in mid-ocean ridge inputs or the efficiency of global weathering. For example, the Cretaceous greenhouse is thought to be related to enhanced oceanic crust production, while the late Cenozoic icehouse is attributed to enhanced chemical weathering associated with the Himalayan orogeny. Here, we show that continental arcs may play a more important role in controlling climate, both in terms of sources and sinks. Continental arcs differ from island arcs and mid-ocean ridges in that the continental plate through which arc magmas pass may contain large amounts of sedimentary carbonate, accumulated over the history of the continent. Interaction of arc magmas with crustal carbonates via assimilation, reaction or heating can significantly add to the mantle-sourced CO2 flux. Detrital zircons and global mapping of basement rocks shows that the length of continental arcs in the Cretaceous was more than twice that in the mid-Cenozoic; maps also show many of these arcs intersected crustal carbonates. The increased length of continental arc magmatism coincided with increased oceanic spreading rates, placing convergent margins into compression, which favors continental arcs. Around 50 Ma, however, nearly all the continental arcs in Eurasia and North America terminated as India collided with Eurasia and the western Pacific rolled back, initiating the Marianas-Tonga-Kermadec intra-oceanic subduction complex and possibly leading to a decrease in global CO2 production. Meanwhile, extinct continental arcs continued to erode, resulting in regionally enhanced chemical weathering unsupported by magmatic fluxes of CO2. Continental arcs, during their magmatic lifetimes, are thus a source of CO2, driving

From steep feeders to tabular plutons - Emplacement controls of syntectonic granitoid plutons in the Damara Belt, Namibia

Science.gov (United States)

Hall, Duncan; Kisters, Alexander

2016-01-01

Granitoid plutons in the deeply eroded south Central Zone of the Damara Belt in Namibia commonly show tabular geometries and pronounced stratigraphic controls on their emplacement. Subhorizontal, sheet-like pluton geometries record emplacement during regional subhorizontal shortening, but the intrusion of spatially and temporally closely-related granitoid plutons at different structural levels and in distinct structural settings suggests independent controls on their levels of emplacement. We describe and evaluate the controls on the loci of the dyke-to-sill transition that initiated the emplacement of three syntectonic (560-530 Ma) plutons in the basement-cover stratigraphy of the Erongo region. Intrusive relationships highlight the significance of (1) rigidity anisotropies associated with competent sedimentary packages or pre-existing subhorizontal granite sheets and (2) rheological anisotropies associated with the presence of thick ductile marble horizons. These mechanical anisotropies may lead to the initial deflection of steep feeder conduits as well as subsequent pluton assembly by the repeated underaccretion of later magma batches. The upward displacement of regional isotherms due to the heat advection associated with granite emplacement is likely to have a profound effect on the mechanical stratification of the upper crust and, consequently, on the level at which granitoid pluton emplacement is initiated. In this way, pluton emplacement at progressively shallower crustal depths may have resulted in the unusually high apparent geothermal gradients recorded in the upper crustal levels of the Damara Belt during its later evolution.

Oxygen and U-Th isotopes and the timescales of hydrothermal exchange and melting in granitoid wall rocks at Mount Mazama, Crater Lake, Oregon

Science.gov (United States)

Ankney, Meagan E.; Bacon, Charles R.; Valley, John W.; Beard, Brian L.; Johnson, Clark M.

2017-01-01

We report new whole rock U-Th and in-situ oxygen isotope compositions for partially melted (0–50 vol% melt), low-δ18O Pleistocene granitoid blocks ejected during the ∼7.7 ka caldera-forming eruption of Mt. Mazama (Crater Lake, Oregon). The blocks are interpreted to represent wall rocks of the climactic magma chamber that, prior to eruption, experienced variable amounts of exchange with meteoric hydrothermal fluids and subsequent partial melting. U-Th and oxygen isotope results allow us to examine the timescales of hydrothermal circulation and partial melting, and provide an “outside in” perspective on the buildup to the climactic eruption of Mt. Mazama. Oxygen isotope compositions measured in the cores and rims of individual quartz (n = 126) and plagioclase (n = 91) crystals, and for transects across ten quartz crystals, document zonation in quartz (Δ18OCore-Rim ≤ 0.1–5.5‰), but show homogeneity in plagioclase (Δ18OCore-Rim ≤ ±0.8‰). We propose that oxygen isotope zonation in quartz records hydrothermal exchange followed by high-temperature exchange in response to partial melting caused by injection of basaltic to andesitic recharge magma into the deeper portions of the chamber. Results of modeling of oxygen diffusion in quartz indicates that hydrothermal exchange in quartz occurred over a period of ∼1000–63,000 years. Models also suggest that the onset of melting of the granitoids occurred a minimum of ∼10–200 years prior to the Mazama climactic eruption, an inference which is broadly consistent with results for magnetite homogenization and for Zr diffusion in melt previously reported by others.Uranium-thorium isotope compositions of most granitoid blocks are in 238U excess, and are in agreement with a 238U enriched array previously measured for volcanic rocks at Mt. Mazama. Uranium excess in the granitoids is likely due to enrichment via hydrothermal circulation, given their low δ18O values. The sample with the

Rhode Island, Connecticut, New York, and New Jersey ESI: FISHL (Fish Lines)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains sensitive biological resource data for anadromous fish species in coastal Rhode Island, Connecticut, New York, and New Jersey. Vector arcs in...

Petrological mineralogical and geochemical characterization of the granitoids and fracture fillings developed in Ratones Mines (Spain); Caracterizacion petrologica, mineralogica, geoquimica y evaluacion del comportamiento geoquimico de las REE en la fase solida (granitoides y rellenos fisurales) del sistema de interaccion agua-roca delentorno de la Mina Ratones

Energy Technology Data Exchange (ETDEWEB)

Buil Gutierrez, B [Ciemat. Madrid (Spain)

2002-07-01

The petrological, mineralogical and geochemical characterisation of the granitoids and fracture fillings developed in the Ratones Mine (Caceres, Spain) has been done in order to understand rock-water interaction processes which control water geochemical parameters. Special interest has been devoted to the analysis and interpretation of REE patterns in the solid phase (granitoids and fracture fillings) because they constitute geochemical tracers in water-rock interaction process. Moreover, REE are considered as actinide analogues. In order to characterise the solid phase (granitoids and fracture fillings) several investigation scales (system, outcrop, whole rock, mineral and geochemical components) have been considered and different types of samples have been analysed. These factors control the methodological approach used in this investigation. The analytical methods we have used in this investigation are microscope, qualitative and semi-quantitative methods (XRD, SEM,EDAX) and quantitative methods (ICP-MS, XRF, EM, LAM-IC-MS). The bulk of the granitoids located around the Ratones Mine Belongs to the alkaline feldspar granite-sienogranite lihotype and they show a peraluminous and subalkaline pattern. From the mineralogical point of view, they are composed by quartz, K-feldspar (Or>90%), showing sericitation, moscovitization and turmolinization altherations, alkaline plagioclase (An-=-3%), usually altered to sericite, saussirite and less frequently affected by moscovitization processes, Fe-Al biotite, frequently affected by chloritization processes and sometimes replaced by muscovite, and finally muscovite (>2% celadonite and <4% paragonite) both of primary and secondary origin. The differences observed between the different lithotypes are related with the modal proportion of the principal minerals,with the presence or absence of certain accessory minerals ( turmaline, cordierite), with specific textural patterns, grain size and also with the richness in specific

143Nd/144Nd and 87Sr/86Sr isotope ratio variations in magmatic rocks of Aleutian island arc as regard to the problem of their petrogenesis

International Nuclear Information System (INIS)

Zhuravlev, D.Z.; Chernyshev, I.V.; Tsvetkov, A.A.; Borsuk, A.M.; Agapova, A.A.; Serdyuk, N.I.

1983-01-01

The results of precision measurement of isotope composition of neodymium in rocks of Pre-Quaternary magmatic formations of the Aleutian island arc (AIA) (Commander Islands). It has been found summing the Nd and Sr analysis results in AIA magmatic rocks that AIA magmatic melts are of mantle origin. The AIA magma source the full its length off and for all the history of geological development remained isotopically homogeneousm Crust contamination of magmatic melts played a significant role only in the initial and early stages of the AIA development, in the later and conclusive stages this process has been sharply reduced. Sedimentary material practically did not take part in the magmaproduction process at the initial stage of the AIA development, it is hardly probable that its role increased at the later stages. The cause of important 87 Sr/ 86 Sr ratio variations in the rocks of one AIA petrographic type is the propylitization process with participation of sea water. Variance of 87 Sr/ 86 Sr ratios without taking into account other isotope systems data is not an indisputable proof of magma source heterogeneity

Unusual Rb-Sr data on the age of two typical peralkaline granitoid plutons in West Transbeikalia

International Nuclear Information System (INIS)

Litvinovskij, B.A.; Posokhov, V.F.; Zanvilevich, A.N.

1995-01-01

Rb-Sr isotope study of two typical plutons in West Transbaikalia (Bryansk and Kharitonov) has been carried out. For alkaline and peralkaline suits of the Bryansk pluton the obtained data are 287 ± m.y., I Sx =0.7054 ± 3 and 285 ± 1 m.y., I Sr =0.7037 ± 3 respectively. Rb-Sr age of peralkaline syenites and granites from the Kharitonov pluton are in more or less consistency with those on the Malokunal pluton (233 ± 5 m.y.) and much less than the age of the Khorinsk pluton (253 ± 3 m.y.). Taking into account the K-Ar data on amphibole from the peralkaline granitoids it is concluded that probable age of these rocks span the interval 250-220 m.y. However results obtained from the Bryansk pluton suggest that within the Mongolia-Transbaikalia belt one more stage of peralkaline granitoid generation i.e. the Early Permian stage could be manifested as well. 20 refs.; 5 figs.; 3 tabs

Amphibious Magnetotelluric Investigation of the Aleutian Arc: Mantle Melt Generation and Migration beneath Okmok Caldera

Science.gov (United States)

Zelenak, G.; Key, K.; Bennington, N. L.; Bedrosian, P.

2015-12-01

Understanding the factors controlling the release of volatiles from the downgoing slab, the subsequent generation of melt in the overlying mantle wedge, the migration of melt to the crust, and its evolution and emplacement within the crust are important for advancing our understanding of arc magmatism and crustal genesis. Because melt and aqueous fluids are a few orders of magnitude more electrically conductive than unmelted peridotite, the conductivity-mapping magnetotelluric (MT) method is well-suited to imaging fluids and melt beneath arc volcanoes. Here we present conductivity results from an amphibious MT profile crossing Okmok volcano in the central Aleutian arc. The Aleutian arc is one of the most volcanically active regions in North America, making it an ideal location for studying arc magnetism. Okmok volcano, located on the northeastern portion of Umnak Island, is among the most active volcanoes in the Aleutian chain. In addition to two caldera-forming events in the Holocene, numerous eruptions in the past century indicate a robust magmatic supply. Previous coarse resolution seismic studies have inferred a crustal magma reservoir. In order to investigate the role fluids play in melting the mantle wedge, how melts ascend through the corner flow regime of the mantle wedge, how melt migrates and is stored within the upper mantle and crust, and how this impacts explosive caldera forming eruptions, we carried out an amphibious geophysical survey across the arc in June-July 2015. Twenty-nine onshore MT stations and 10 offshore stations were collected in a 3D array covering Okmok, and 43 additional offshore MT stations completed a 300 km amphibious profile starting at the trench, crossing the forearc, arc and backarc. Thirteen onshore passive seismic stations were also installed and will remain in place for one year to supplement the twelve permanent stations on the island. Data collected by this project will be used to map seismic velocity and electrical

U-Th-Pb systematics of some granitoids from the northeastern Yilgarn Block, Western Australia and implications for uranium source rock potential

Energy Technology Data Exchange (ETDEWEB)

Stuckless, J S; Nkomo, I T [Geological Survey, Denver, CO (USA); Bunting, J A [Geological Survey of Western Australia, Perth

1981-11-01

The Mount Boreas-type granite and spatially associated syenitic granitoid of Western Australia yield Pb-Pb ages of 2370 +- 100 Ma and 2760 +- 210 Ma, respectively. Th-Pb ages, although less precise, are concordant with these ages, and therefore the apparent ages are interpreted to be the crystallisation ages for these two units. U-Pb ages are variable and for the most part anomalously old, which suggests a Cainozoic uranium loss. However, this loss is generally small (3..mu..g/g); therefore, neither granitoid in its fresh state provides a good source for nearby calcrete-hosted uranium deposits. The possibility remains that the Mount Boreas-type granite that has been completely weathered during the Tertiary could have been a source for the calcrete-type uranium deposits in W.A. Although the Mount Boreas-type granite is highly fractionated, it does not bear a strong geochemical imprint of a sedimentary precursor. This feature contrasts it with apparently fresh granitoids from other parts of the world that have lost large amounts of uranium (approx. 20..mu..g/g) and are associated with large roll-type and other low temperature-type uranium deposits.

Metal halide arc discharge lamp having short arc length

Science.gov (United States)

Muzeroll, Martin E. (Inventor)

1994-01-01

A metal halide arc discharge lamp includes a sealed light-transmissive outer jacket, a light-transmissive shroud located within the outer jacket and an arc tube assembly located within the shroud. The arc tube assembly includes an arc tube, electrodes mounted within the arc tube and a fill material for supporting an arc discharge. The electrodes have a spacing such that an electric field in a range of about 60 to 95 volts per centimeter is established between the electrodes. The diameter of the arc tube and the spacing of the electrodes are selected to provide an arc having an arc diameter to arc length ratio in a range of about 1.6 to 1.8. The fill material includes mercury, sodium iodide, scandium tri-iodide and a rare gas, and may include lithium iodide. The lamp exhibits a high color rendering index, high lumen output and high color temperature.

Granitoids of the Dry Valleys area, southern Victoria Land, Antarctica : plutons, field relationships, and isotopic dating

International Nuclear Information System (INIS)

Allibone, A.H.; Cox, S.C.; Johnstone, R.D.

1993-01-01

Detailed mapping throughout much of the Dry Valleys area indicates the region is underlain by 15 major granitoid plutons and numerous smaller plugs and dikes. Intrusive relationships of these plutons and dikes indicate repeated intrusion of superficially similar granitoids at different times. Sufficient internal lithologic variation occurs within individual plutons, to allow correlation with several of the previously defined granitoid units based on lithologic character. Consequently, previous subdivision schemes based on lithology are no longer tenable and are here replaced with a subdivision scheme based on the identification of individual plutons. The elongate, concordant Bonney, Denton, Cavendish, and Wheeler Plutons, which range in composition between monzodiorite and granodiorite, are the oldest relatively undeformed plutons in the Dry Valleys area. Each pluton is characterised by flow alignment of K-feldspar megacrysts, hornblende, biotite, and mafic enclaves. Field relationships and radiometric dating indicate these are deep-level plutons, emplaced synchronous with upper amphibolite facies metamorphism of the adjacent Koettlitz Group between 589 and 490 Ma ago. Elongate, discordant plutons of equigranular homogeneous biotite granodiorite and granite (Hedley, Valhalla, St Johns, Suess) were subsequently emplaced by stoping at a relatively high crustal level at 490 Ma. These eight plutons are cut by numerous swarms of Vanda mafic and felsic porphyry dikes. The ovoid, discordant, high level Pearse, Nibelungen, Orestes, Brownworth, Swinford, and Harker Plutons, emplaced between c. 486 and 477 Ma, display mutually crosscutting relationships with the youngest of the Vanda dikes. These younger plutons range in composition between monzonite and granite. Some are characterised by K-feldspar megacrystic textures superficially similar to some of the oldest concordant plutons. (author). 57 refs.; 2 tabs.; 4 figs

The tardi-Pan-African granitoids of South-Westerner Anti-Atlas (Morocco: Evolution from magnesian to ferroan type. Example of the Ifni inlier

Directory of Open Access Journals (Sweden)

El Aouli, E. H.

2007-06-01

Full Text Available The study of the neoproterozoic granitoids in the Ifni Inlier and those of the other inliers in south-westerner Anti-Atlas shows that this magmatism evolves from magnesian to ferroan type. In the Ifni inlier, these granitoids outcrop within the sedimentary and volcanogenic formations of the Ouarzazate Super- Group SGO (615 to 540 My. They belong to two distinct magmatic episodes (i an early one composed of magnesian granitoids with alkali-calcic and metaluminous to slightly aluminous character (quartz bearing diorite, granodiorite and monzogranite intrusive in the lower formations of the SGO, and (ii a late episode associated to the summit of the SGO volcanites, which includes granites and sub-volcanic syenogranites of iron-bearing type and alkali-calcic to alkaline affinity. These magmatisms resulting from the partial melting of mixed material mark the end of the last Panafrican episode and would be set up in a transition from orogenic to anorogenic settings which announce the Paleozoic cycle. They would be contemporary to posterior with the exhumation of the extensive metamorphic domes of the Western Anti-Atlas.El estudio de los granitoides neoproterozoicos de la “boutonnière” (complejo plutono-metamórfico profundo con geometría subcircular de Ifni y de los de otras “boutonnières” del dominio suroccidental del Anti-Atlas, demuestra que este magmatismo evoluciona desde un tipo magnésico hacia un tipo férrico. En la “boutonnière” de Ifni, estos granitoides afloran en el interior de formaciones sedimentarias y volcano-sedimentarias del Supergrupo de Ouarzazate SGO (615 a 540 Ma. Pertenecen a dos episodios magmáticos diferentes (i un episodio precoz compuesto de granitoides magnésicos, calcoalcalinos y metaluminosos a poco aluminosos (dioritas con cuarzo, granodioritas y monzogranitos que intruyen en las formaciones inferiores del SGO, (ii un episodio tardío asociado con un vulcanismo terminal a techo del

Monitoring ARC services with GangliARC

International Nuclear Information System (INIS)

Cameron, D; Karpenko, D

2012-01-01

Monitoring of Grid services is essential to provide a smooth experience for users and provide fast and easy to understand diagnostics for administrators running the services. GangliARC makes use of the widely-used Ganglia monitoring tool to present web-based graphical metrics of the ARC computing element. These include statistics of running and finished jobs, data transfer metrics, as well as showing the availability of the computing element and hardware information such as free disk space left in the ARC cache. Ganglia presents metrics as graphs of the value of the metric over time and shows an easily-digestable summary of how the system is performing, and enables quick and easy diagnosis of common problems. This paper describes how GangliARC works and shows numerous examples of how the generated data can quickly be used by an administrator to investigate problems. It also presents possibilities of combining GangliARC with other commonly-used monitoring tools such as Nagios to easily integrate ARC monitoring into the regular monitoring infrastructure of any site or computing centre.

Arc Interference Behavior during Twin Wire Gas Metal Arc Welding Process

Directory of Open Access Journals (Sweden)

Dingjian Ye

2013-01-01

Full Text Available In order to study arc interference behavior during twin wire gas metal arc welding process, the synchronous acquisition system has been established to acquire instantaneous information of arc profile including dynamic arc length variation as well as relative voltage and current signals. The results show that after trailing arc (T-arc is added to the middle arc (M-arc in a stable welding process, the current of M arc remains unchanged while the agitation increases; the voltage of M arc has an obvious increase; the shape of M arc changes, with increasing width, length, and area; the transfer frequency of M arc droplet increases and the droplet itself becomes smaller. The wire extension length of twin arc turns out to be shorter than that of single arc welding.

Control of paleoshorelines by trench forebulge uplift, Loyalty Islands

Science.gov (United States)

Dickinson, William R.

2013-07-01

Unlike most tropical Pacific islands, which lie along island arcs or hotspot chains, the Loyalty Islands between New Caledonia and Vanuatu owe their existence and morphology to the uplift of pre-existing atolls on the flexural forebulge of the New Hebrides Trench. The configuration and topography of each island is a function of distance from the crest of the uplifted forebulge. Both Maré and Lifou are fully emergent paleoatolls upon which ancient barrier reefs form highstanding annular ridges that enclose interior plateaus representing paleolagoon floors, whereas the partially emergent Ouvea paleoatoll rim flanks a drowned remnant lagoon. Emergent paleoshoreline features exposed by island uplift include paleoreef flats constructed as ancient fringing reefs built to past low tide levels and emergent tidal notches incised at past high tide levels. Present paleoshoreline elevations record uplift rates of the islands since last-interglacial and mid-Holocene highstands in global and regional sea levels, respectively, and paleoreef stratigraphy reflects net Quaternary island emergence. The empirical uplift rates vary in harmony with theoretical uplift rates inferred from the different positions of the islands in transit across the trench forebulge at the trench subduction rate. The Loyalty Islands provide a case study of island environments controlled primarily by neotectonics.

Granitoids of the Dry Valleys area, southern Victoria Land : geochemistry and evolution along the early Paleozoic Antarctic Craton margin

International Nuclear Information System (INIS)

Allibone, A.H.; Cox, S.C.; Smillie, R.W.

1993-01-01

Field relationships and geochemistry indicate granitoid plutons of the Dry Valleys area comprise at least three petrogenetically distinct suites. The older Dry Valleys 1a (DV1a) suite, comprising the Bonney, Catspaw, Denton, Cavendish, and Wheeler Plutons and hornblende-biotite orthogneisses, and Dry Valleys 1b (DV1b) suite, comprising the Hedley, Valhalla, St Johns, Dun, Calkin, and Suess Plutons, biotite granitoid dikes and biotite orthogneisses, were emplaced before prominent swarms of Vanda mafic and felsic dikes. Both the DV1a and DV1b suites are time transgressive, with older intrusions in each suite being emplaced during the later stages of deformation of the Koettlitz Group. Younger granitoids that postdate the majority of the Vanda dikes include: the Dry Valleys 2 (DV2) suite, comprising the Pearse and Nibelungen Plutons plus several smaller, unnamed plugs; and the Harker, Swinford, Orestes, and Brownworth Plutons with identical field relationships and enclaves but distinct chemistries. Chemical characteristics and limited Rb-Sr isotopic dating indicate plutonism before c. 500 Ma was dominated by the Cordilleran I-type DV1a suite, inferred to have developed during melting above a west-dipping subduction zone along the Antarctic Craton margin. The chemical characteristics of the DV1b suite indicate large-scale melting of a quartzo-feldspathic protolith lacking residual plagioclase, but containing refractory garnet. Potential DV1b suite source rocks include metamorphosed immature sediments, possibly underplated along the subduction zone associated with DV1a magmatism, or older granitoid orthogneisses. Major DV1b plutonism at 490 Ma marks the end of subduction-related plutonism in southern Victoria Land. Younger DV2 alkali-calcic, Caledonian I-type plutonism is inferred to have formed in response to uplift and extension between 480 and 455 Ma. Lack of DV2 suite correlatives and Vanda mafic and felsic dikes in northern Victoria Land suggests significantly

Permian alkali granitoids of the transbaikal region (new Rb-Sr dates)

Energy Technology Data Exchange (ETDEWEB)

Sukhanov, M K; Ryakhovskij, V M; Abramov, A V

1984-01-01

Rubidium-strontium isotopic investigations of granitoids from Khorinsk and Middle Oninsk massifs were conducted. Isochrones for two chief-modifications of rocks - subalkaline syenites and alkaline granites-were constructed. The age of syenites is determined to be (293 + 20) x 10/sup 6/ at (/sup 87/Sr//sup 86/Sr)/sub 0/=0.7044 +- 0.0106 that of alkaline granites - (253 +- 3) x 10/sup 6/ at (/sup 87/Sr//sup 86/Sr)/sub 0/=0.7077 +- 0.0033. Analytical data for determination of rubidium-strontium age of rocks of the mentioned massits are presented as well.

Arc Shape Characteristics with Ultra-High-Frequency Pulsed Arc Welding

Directory of Open Access Journals (Sweden)

Mingxuan Yang

2017-01-01

Full Text Available Arc plasma possesses a constriction phenomenon with a pulsed current. The constriction is created by the Lorentz force, the radial electromagnetic force during arc welding, which determines the energy distribution of the arc plasma. Welding experiments were carried out with ultra-high-frequency pulsed arc welding (UHFP-AW. Ultra-high-speed camera observations were produced for arc surveillance. Hue-saturation-intensity (HSI image analysis was used to distinguish the regions of the arc plasma that represented the heat energy distribution. The measurement of arc regions indicated that, with an ultra-high-frequency pulsed arc, the constriction was not only within the decreased arc geometry, but also within the constricted arc core region. This can be checked by the ratio of the core region to the total area. The arc core region expanded significantly at 40 kHz at 60 A. A current level of 80 A caused a decrease in the total region of the arc. Meanwhile, the ratio of the core region to the total increased. It can be concluded that arc constriction depends on the increased area of the core region with the pulsed current (>20 kHz.

Multivariate statistical tools for the radiometric features of volcanic islands

International Nuclear Information System (INIS)

Basile, S.; Brai, M.; Marrale, M.; Micciche, S.; Lanzo, G.; Rizzo, S.

2009-01-01

The Aeolian Islands represents a Quaternary volcanic arc related to the subduction of the Ionian plate beneath the Calabrian Arc. The geochemical variability of the islands has led to a broad spectrum of magma rocks. Volcanic products from calc-alkaline (CA) to calc-alkaline high in potassium (HKCA) are present throughout the Archipelago, but products belonging to shoshonitic (SHO) and potassium (KS) series characterize the southern portion of Lipari, Vulcano and Stromboli. Tectonics also plays an important role in the process of the islands differentiation. In this work, we want to review and cross-analyze the data on Lipari, Stromboli and Vulcano, collected in measurement and sampling campaigns over the last years. Chemical data were obtained by X-ray fluorescence. High resolution gamma-ray spectrometry with germanium detectors was used to measure primordial radionuclide activities. The activity of primordial radionuclides in the volcanic products of these three islands is strongly dependent on their chemism. The highest contents are found in more differentiated products (rhyolites). The CA products have lower concentrations, while the HKCA and Shoshonitic product concentrations are in between. Calculated dose rates have been correlated with the petrochemical features in order to gain further insight in evolution and differentiation of volcanic products. Ratio matching technique and multivariate statistical analyses, such as Principal Component Analysis and Minimum Spanning Tree, have been applied as an additional tool helpful to better describe the lithological affinities of the samples. (Author)

Petrochemical and Tectonogenesis of Granitoids in the Wuyo-Gubrunde Horst, Northeastern Nigeria: Implication for Uranium Enrichment

Energy Technology Data Exchange (ETDEWEB)

Bolarinwa, Anthony Temidayo, E-mail: atbola@yahoo.com; Bute, Saleh Ibrahim [University of Ibadan, Department of Geology (Nigeria)

2016-06-15

The Wuyo-Gubrunde Horst in the northeastern Nigeria consists of migmatite gneiss, unaltered, altered, and sheared porphyritic granites, pegmatites, aplites, basalts, and sandstone. Uranium has been reported in rhyolite, sheared rocks, and sandstone within the area. The petrogenesis of the granitoids and associated rocks in the area was evaluated in the light of new geochemical data, which showed that the U content of altered porphyritic granite is highest and hydrothermal-related. The granitoids are metaluminous, sub-alkaline, and S-type granite, and have evolved by partial melting of crustal material emplaced at moderate depth of 20–30 km in a syn-to late-collisional within-plate tectonic setting. The negative Eu/Eu* anomaly and high (La/Yb){sub N} ratio of the granitoids indicate magma fractionation. The low SiO{sub 2} (<53%) and high Fe{sub 2}O{sub 3} (10%) of the altered porphyritic granite compared to other similar rock units suggest pervasive alteration. The associated basalts are tholeiitic, emplaced within continental plate tectonic setting, and enriched in Ni, V, Nb, Sr, and light rare earth elements, and they have SiO{sub 2}, Fe{sub 2}O{sub 3}, V, Th, and Co contents that are similar to those of the altered porphyritic granites. The U occurrence in the Wuyo-Gubrunde Horst is believed to be sourced from the adjoining Bima sandstone in the Benue Trough, which locally contains carbonaceous zones with anomalously high concentrations of U. The Fe{sup 2+}/Fe{sup 3+} redox fronts formed by alteration of the iron-rich basalts provided the requisite geochemical barrier for U-bearing hydrothermal fluid, causing enrichment of U leached and mobilized from the sandstone through fractures in the rocks.

Field {gamma}-ray spectrometry on the Vulcano island (Aeolian Arc, Italy)

Energy Technology Data Exchange (ETDEWEB)

Chiozzi, P.; Pasquale, V.; Russo, D.; Verdoya, M. [Dipartimento di Scienze della Terra, Universita di Genova, Genoa (Italy); De Felice, P. [Istituto Nazionale di Metrologica delle Radiazioni Ionizzanti ENEA, Dipartimento Ambiente, Centro Ricerche Casaccia, Rome (Italy)

1999-08-01

In situ NaI(Tl) {gamma}-ray spectrometric measurements on the Vulcano island show that the magmatic evolution of the main structural units is reflected by the uranium, thorium and potassium concentrations. The results allowed us to delineate two temporal and radiometric districts. The older district comprises lava flows and pyroclastics of mafic composition forming the whole southern part of the island, with an equivalent uranium concentration and an eTh/eU ratio ranging, on average, from 2.9 to 3.4 ppm and from 2.4 to 4.1, respectively. Rocks of the younger district, ranging from leucitic tephritic and trachytic to rhyolitic composition, show higher K contents (about 6%) and more variable eTh/eU ratios (2.4-6.1)

Field γ-ray spectrometry on the Vulcano island (Aeolian Arc, Italy)

International Nuclear Information System (INIS)

Chiozzi, P.; Pasquale, V.; Russo, D.; Verdoya, M.; De Felice, P.

1999-01-01

In situ NaI(Tl) γ-ray spectrometric measurements on the Vulcano island show that the magmatic evolution of the main structural units is reflected by the uranium, thorium and potassium concentrations. The results allowed us to delineate two temporal and radiometric districts. The older district comprises lava flows and pyroclastics of mafic composition forming the whole southern part of the island, with an equivalent uranium concentration and an eTh/eU ratio ranging, on average, from 2.9 to 3.4 ppm and from 2.4 to 4.1, respectively. Rocks of the younger district, ranging from leucitic tephritic and trachytic to rhyolitic composition, show higher K contents (about 6%) and more variable eTh/eU ratios (2.4-6.1)

Subaerial records of large-scale explosive volcanism and tsunami along an oceanic arc, Tonga, SW Pacific

Science.gov (United States)

Cronin, S. J.; Smith, I. E.

2015-12-01

We present a new chronology of major terrestrial eruptions and tsunami events for the central Tongan Arc. The active Tonga-Kermadec oceanic arc extends 2500 km northward of New Zealand and hosts many tens of submarine volcanoes with around a dozen forming islands. Despite its obious volcanic setting, the impacts of explosive volcanism and volcano-tectonic related tsunami are an often overlooked in archaeological and paleo-botanical histories, mainly due the lack of good Holocene subaerial exposures. The inhabited small uplifted coral platform islands east of the volcanic arc in Tonga collectively cover only gods flying overhead with baskets of ash, and an analysis of the high-level wind distribution patterns, lake and wetland sites were investigated along the Tongan chain. In most cases former lagoon basins lifted above sea-level by a combination of tectonic rise and the lowering of mean sea levels by around 2 m since the Mid-Holocene form closed lake or swampy depressions. Coring reveaed between 6 and 20 mineral layers at each site, withn humic sediment or peat. Over thirty new radiocarbon dates were collected to develop a chronology for the sequences and the mineral layers were examined mineralogically and geochemically. These sites reveal mainly tephra fall layers of particles.

Elemental and Sr-Nd isotopic geochemistry of Cretaceous to Early Paleogene granites and volcanic rocks in the Sikhote-Alin Orogenic Belt (Russian Far East): implications for the regional tectonic evolution

Science.gov (United States)

Zhao, Pan; Jahn, Bor-ming; Xu, Bei

2017-09-01

The Sikhote-Alin Orogenic Belt in Russian Far East is an important Late Mesozoic to Early Cenozoic accretionary orogen related to the subduction of the Paleo-Pacific Plate. This belt was generated by successive accretion of terranes made of accretionary prisms, turbidite basins and island arcs to the continental margin of northeastern Asia (represented by the Bureya-Jiamusi-Khanka Block) from Jurassic to Late Cretaceous. In order to study the tectonic and crustal evolution of this orogenic belt, we carried out zircon U-Pb dating, and whole-rock elemental and Sr-Nd isotopic analyses on granites and volcanic rocks from the Primorye region of southern Sikhote-Alin. Zircon dating revealed three episodes of granitoid emplacement: Permian, Early Cretaceous and Late Cretaceous to Early Paleogene. Felsic volcanic rocks (mainly rhyolite, dacite and ignimbrite) that overlay all tectonostratigraphic terranes were erupted during 80-57 Ma, postdating the accretionary process in the Sikhote-Alin belt. The Cretaceous-Paleogene magmatism represents the most intense tectonothermal event in the Sikhote-Alin belt. Whole-rock major and trace elemental data show arc-like affinity for granitoids and volcanic rocks, indicating that they were likely generated in a supra-subduction setting. Their initial 87Sr/86Sr ratios range from 0.7048 to 0.7114, and εNd(t) values vary from +1.7 to -3.8 (mostly < 0). Thus, the elemental and Sr-Nd isotopic data suggest that the felsic magmas were generated by partial melting of source rocks comprising mantle-derived juvenile component and recycled crustal component. In addition to the occurrence in the Sikhote-Alin orogenic belt, Cretaceous to Early Paleogene magmatic rocks are also widespread in NE China, southern Korean peninsula, Japanese islands and other areas of Russian Far East, particularly along the coastal regions of the Okhotsk and Bering Seas. These rocks constitute an extended magmatic belt along the continental margin of NE Asia. The

St. Thomas and St. John, U.S. Virgin Islands Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The 1/3 arc-second St. Thomas and St. John, U.S. Virgin Islands Coastal Digital Elevation Model will be used to support NOAA's tsunami forecast system and for...

A review of the ascent and emplacement of granitoid bodies into the crust

Directory of Open Access Journals (Sweden)

Katarína Bónová

2005-03-01

Full Text Available This paper relates to basic information (i.e. mechanical aspects of ascent, indicators faciliting the discriminability of various ascent styles about the models of ascent and emplacement of granitoid bodies, since the purely mechanical aspect of intrusion of magmas is a fascinating subject and it has generated a considerable controversy over many years. Individual models are demonstrated by world-known occurrences and examples from Western Carpathian’s region. The conditions of magma migration are demonstrated as well.

Seismic velocity variation along the Izu-Bonin arc estaimated from traveltime tomography using OBS data

Science.gov (United States)

Obana, K.; Tamura, Y.; Takahashi, T.; Kodaira, S.

2014-12-01

The Izu-Bonin (Ogasawara) arc is an intra-oceanic island arc along the convergent plate boundary between the subducting Pacific and overriding Philippine Sea plates. Recent active seismic studies in the Izu-Bonin arc reveal significant along-arc variations in crustal structure [Kodaira et al., 2007]. The thickness of the arc crust shows a remarkable change between thicker Izu (~30 km) and thinner Bonin (~10 km) arcs. In addition to this, several geological and geophysical contrasts, such as seafloor topography and chemical composition of volcanic rocks, between Izu and Bonin arc have been reported [e.g., Yuasa 1992]. We have conducted earthquake observations using ocean bottom seismographs (OBSs) to reveal seismic velocity structure of the crust and mantle wedge in the Izu-Bonin arc and to investigate origin of the along-arc structure variations. We deployed 40 short-period OBSs in Izu and Bonin area in 2006 and 2009, respectively. The OBS data were processed with seismic data recorded at routine seismic stations on Hachijo-jima, Aoga-shima, and Chichi-jima operated by National Research Institute for Earth Science and Disaster Prevention (NIED). More than 5000 earthquakes were observed during about three-months observation period in each experiment. We conducted three-dimensional seismic tomography using manually picked P- and S-wave arrival time data. The obtained image shows a different seismic velocity structures in the mantle beneath the volcanic front between Izu and Bonin arcs. Low P-wave velocity anomalies in the mantle beneath the volcanic front in the Izu arc are limited at depths deeper than those in the Bonin arc. On the other hand, P-wave velocity in the low velocity anomalies beneath volcanic front in the Bonin arc is slower than that in the Izu arc. These large-scale along-arc structure variations in the mantle could relate to the geological and geophysical contrasts between Izu and Bonin arcs.

CRED 20 m Gridded bathymetry and IKONOS estimated depths of Northampton Seamounts to Laysan Island, Northwestern Hawaiian Islands, USA (Arc ASCII format)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Gridded bathymetry and IKONOS estimated depths of the shelf and slope environments of Northampton Seamounts to Laysan Island, Northwestern Hawaiian Islands, Hawaii,...

CRED 5 m Gridded bathymetry of Baker Island, Pacific Remote Island Areas, Central Pacific (Arc ASCII Format)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Gridded (5 m cell size) bathymetry of the shelf and slope environments of Baker Island, Pacific Remote Isand Areas, Central Pacific. Almost complete bottom coverage...

Effect of Si on DC arc plasma generation from Al-Cr and Al-Cr-Si cathodes used in oxygen

Science.gov (United States)

Zhirkov, I.; Landälv, L.; Göthelid, E.; Ahlgren, M.; Eklund, P.; Rosen, J.

2017-02-01

Al2O3 alloyed with Cr is an important material for the tooling industry. It can be synthesized from an arc discharge using Al-Cr cathodes in an oxygen atmosphere. Due to formation of Al-rich oxide islands on the cathode surface, the arc process stability is highly sensitive to oxygen pressure. For improved stability, the use of Al0.70Cr0.25Si0.05 cathodes has previously been suggested, where Si may reduce island formation. Here, we have investigated the effect of Si by comparing plasma generation and thin film deposition from Al0.7Cr0.3 and Al0.7Cr0.25Si0.05 cathodes. Plasma ion composition, ion energies, ion charge states, neutral species, droplet formation, and film composition have been characterized at different O2 flow rates for arc currents of 60 and 90 A. Si and related compounds are detected in plasma ions and in plasma neutrals. Scanning electron microscopy and energy dispersive X-ray analysis show that the cathode composition and the film composition are the same, with Si present in droplets as well. The effect of Si on the process stability, ion energies, and ion charge states is found to be negligible compared to that of the arc current. The latter is identified as the most relevant parameter for tuning the properties of the reactive discharge. The present work increases the fundamental understanding of plasma generation in a reactive atmosphere, and provides input for the choice of cathode composition and process parameters in reactive DC arc synthesis.

Transition of magma genesis estimated by change of chemical composition of Izu-bonin arc volcanism associated with spreading of Shikoku Basin

Science.gov (United States)

Haraguchi, S.; Ishii, T.

2006-12-01

Arc volcanism in the Izu-Ogasawara arc is separated into first and latter term at the separate of Shikoku Basin. Middle to late Eocene early arc volcanism formed a vast terrane of boninites and island arc tholeiites that is unlike active arc systems. A following modern-style arc volcanism was active during the Oligocene, along which intense tholeiitic and calc-alkaline volcanism continued until 29Ma, before spreading of the back- arc basin. The recent arc volcanism in the Izu-Ogasawara arc have started in the middle Miocene, and it is assumed that arc volcanism were decline during spreading of back-arc basin. In the northern Kyushu-Palau Ridge, submarine bottom materials were dredged during the KT95-9 and KT97-8 cruise by the R/V Tansei-maru, Ocean Research Institute, university of Tokyo, and basaltic to andesitic volcanic rocks were recovered during both cruise except for Komahashi-Daini Seamount where recovered acidic plutonic rocks. Komahashi-Daini Seamount tonalite show 37.5Ma of K-Ar dating, and this age indicates early stage of normal arc volcanism. These volcanic rocks are mainly cpx basalt to andesite. Two pyroxene basalt and andesite are only found from Miyazaki Seamount, northern end of the Kyushu-Palau Ridge. Volcanic rocks show different characteristics from first term volcanism in the Izu-Ogasawara forearc rise and recent arc volcanism. The most characteristic is high content of incompatible elements, that is, these volcanics show two to three times content of incompatible elements to Komahashi-Daini Seamount tonalite and former normal arc volcanism in the Izu outer arc (ODP Leg126), and higher content than recent Izu arc volcanism. This characteristic is similar to some volcanics at the ODP Leg59 Site448 in the central Kyushu- Palau Ridge. Site448 volcanic rocks show 32-33Ma of Ar-Ar ages, which considered beginning of activity of Parece Vela Basin. It is considered that the dredged volcanic rocks are uppermost part of volcanism before spreading of

Lithogeochemistry of the main unities of Pelotas batholith from Rio Grande do Sul State

International Nuclear Information System (INIS)

Figueiredo, M.C.H. de; Cesar, A.R.S.; Kronberg, B.I.

1990-01-01

The Pelotas batholith is composed predominantly of a Cambrian multi-intrusive granitic complex (Dom Feliciano Granitic Suite) associated to rhyolitic dike swarms and small basic plutons. The Piratini Gneisses (Late Riphean -Vendian) correspond to calcalkaline dioritic-tonalitic-granodioritic orthogneisses with chemical features of pre-collisional granitoids related to oceanic crust subduction (B-subduction) under an active continental margin. The Pinheiro Machado Granitoids (Vendian) are alkali-calcic granodiorite-monzogranites with Caledonian-type characteristics, but appear to also correspond to pre-collisional granitoids as a latter and more mature phase in the evolution of the magmatic arc. The Dom Feliciano Granitic Suite (Cambrian) is subdivided into porphyritic and equigranular facies, with predominance of monzogranites and syenogranites, respectively, with alkali-calcic late-orogenic characteristics. While the Rb/Sr isotopic data is consistent with the proposed evolution, the Nd model ages range from 2.0 - 1.2 Ga. This may reflect episodes of Sm/Nd fractionation within a lithospheric mantle instead of the accretion age of the granitoids. These apparent ages, which are also obtained in Parana and Karroo continental basalts, probably indicate coupled evolution of the continental crust and lithospheric mantle. In the suggested model, the Piratini Gneisses were orginated by differentiation of basic magmas formed by partial melting of lithospheric mantle, induced by dehydration of subducted oceanic crust, while the more mature arc granitoids had increasing crustal contamination or mingling-mixing with crustal melts and finally, in the late-and post-orogenic stages, partial melting of continental crust predominates. (author)

Energy Transition Initiative: Island Energy Snapshot - St. Lucia (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

2015-02-01

This profile provides a snapshot of the electricity generation or reduction technologies, including solar hot water heating, available to Saint Lucia, one of six Caribbean countries that make up the Windward Islands - the southern arc of the Lesser Antilles chain - at the eastern end of the Caribbean Sea. Heating and transportation fuels are not addressed.

On arc efficiency in gas tungsten arc welding

Directory of Open Access Journals (Sweden)

Nils Stenbacka

2013-12-01

Full Text Available The aim of this study was to review the literature on published arc efficiency values for GTAW and, if possible, propose a narrower band. Articles between the years 1955 - 2011 have been found. Published arc efficiency values for GTAW DCEN show to lie on a wide range, between 0.36 to 0.90. Only a few studies covered DCEP - direct current electrode positive and AC current. Specific information about the reproducibility in calorimetric studies as well as in modeling and simulation studies (considering that both random and systematic errors are small was scarce. An estimate of the average arc efficiency value for GTAW DCEN indicates that it should be about 0.77. It indicates anyway that the GTAW process with DCEN is an efficient welding method. The arc efficiency is reduced when the arc length is increased. On the other hand, there are conflicting results in the literature as to the influence of arc current and travel speed.

Hurricane impact and recovery shoreline change analysis of the Chandeleur Islands, Louisiana, USA: 1855 to 2005

Science.gov (United States)

Fearnley, Sarah M.; Miner, Michael; Brock, John C.

2011-01-01

Results from historical (1855-2005) shoreline change analysis of the Chandeleur Islands, Louisiana, demonstrate that tropical cyclone frequency dominates the long-term evolution of this barrier-island arc. The detailed results of this study were published in December 2009 as part of a special issue of Geo-Marine Letters that documents early results from the Northern Gulf of Mexico (NGOM) Ecosystem Change and Hazard Susceptibility Project.

Water contents of clinopyroxenes from sub-arc mantle peridotites

Science.gov (United States)

Turner, Michael; Turner, Simon; Blatter, Dawnika; Maury, Rene; Perfit, Michael; Yogodzinski, Gene

2017-01-01

One poorly constrained reservoir of the Earth's water budget is that of clinopyroxene in metasomatised, mantle peridotites. This study presents reconnaissance Sensitive High-Resolution, Ion Microprobe–Stable Isotope (SHRIMP–SI) determinations of the H2O contents of (dominantly) clinopyroxenes in rare mantle xenoliths from four different subduction zones, i.e. Mexico, Kamchatka, Philippines, and New Britain (Tabar-Feni island chain) as well as one intra-plate setting (western Victoria). All of the sub-arc xenoliths have been metasomatised and carry strong arc trace element signatures. Average measured H2O contents of the pyroxenes range from 70 ppm to 510 ppm whereas calculated bulk H2O contents range from 88 ppm to 3 737 ppm if the variable presence of amphibole is taken into account. In contrast, the intra-plate, continental mantle xenolith from western Victoria has higher water contents (3 447 ppm) but was metasomatised by alkali and/or carbonatitic melts and does not carry a subduction-related signature. Material similar to the sub-arc peridotites can either be accreted to the base of the lithosphere or potentially be transported by convection deeper into the mantle where it will lose water due to amphibole breakdown.

Rock strength measurements on Archaean basement granitoids recovered from scientific drilling in the active Koyna seismogenic zone, western India

Science.gov (United States)

Goswami, Deepjyoti; Akkiraju, Vyasulu V.; Misra, Surajit; Roy, Sukanta; Singh, Santosh K.; Sinha, Amalendu; Gupta, Harsh; Bansal, B. K.; Nayak, Shailesh

2017-08-01

Reservoir triggered earthquakes have been occurring in the Koyna area, western India for the past five decades. Triaxial tests carried out on 181 core samples of Archaean granitoids underlying the Deccan Traps provide valuable constraints on rock strength properties in the Koyna seismogenic zone for the first time. The data include measurements on granite gneiss, granite, migmatitic gneiss and mylonitised granite gneiss obtained from boreholes KBH-3, KBH-4A, KBH-5 and KBH-7 located in the western and eastern margins of the seismic zone. Salient results are as follows. (i) Increase of rock strength with increasing confining pressure allow determination of the linearized failure envelopes from which the cohesive strength and angle of internal friction are calculated. (ii) Variable differential stresses at different depths are the manifestations of deformation partitioning in close association of fault zone(s) or localized fracture zones. (iii) Fractures controlled by naturally developed weak planes such as cleavage and fabric directly affect the rock strength properties, but the majority of failure planes developed during triaxial tests is not consistent with the orientations of pre-existing weak planes. The failure planes may, therefore, represent other planes of weakness induced by ongoing seismic activity. (iv) Stress-strain curves confirm that axial deformation is controlled by the varying intensity of pre-existing shear in the granitoids, viz., mylonite, granite gneiss and migmatitic gneiss. (v) Frequent occurrences of low magnitude earthquakes may be attributed to low and variable rock strength of the granitoids, which, in turn, is modified by successive seismic events.

Metallogenetic systems associated with granitoid magmatism in the Amazonian Craton: An overview of the present level of understanding and exploration significance

Science.gov (United States)

Bettencourt, Jorge Silva; Juliani, Caetano; Xavier, Roberto P.; Monteiro, Lena V. S.; Bastos Neto, Artur C.; Klein, Evandro L.; Assis, Rafael R.; Leite, Washington Barbosa, Jr.; Moreto, Carolina P. N.; Fernandes, Carlos Marcello Dias; Pereira, Vitor Paulo

2016-07-01

The Amazonian Craton hosts world-class metallogenic provinces with a wide range of styles of primary precious, rare, base metal, and placer deposits. This paper provides a synthesis of the geological database with regard to granitoid magmatic suites, spatio temporal distribution, tectonic settings, and the nature of selected mineral deposits. The Archean Carajás Mineral Province comprises greenstone belts (3.04-2.97 Ga), metavolcanic-sedimentary units (2.76-2.74 Ga), granitoids (3.07-2.84 Ga) formed in a magmatic arc and syn-collisional setting, post-orogenic A2-type granites as well as gabbros (ca. 2.74 Ga), and anorogenic granites (1.88 Ga). Archean iron oxide-Cu-Au (IOCG) deposits were synchronous or later than bimodal magmatism (2.74-2.70 Ga). Paleoproterozoic IOCG deposits, emplaced at shallow-crustal levels, are enriched with Nb-Y-Sn-Be-U. The latter, as well as Sn-W and Au-EGP deposits are coeval with ca. 1.88 Ga A2-type granites. The Tapajós Mineral Province includes a low-grade meta-volcano-sedimentary sequence (2.01 Ga), tonalites to granites (2.0-1.87 Ga), two calc-alkaline volcanic sequences (2.0-1.95 Ga to 1.89-1.87 Ga) and A-type rhyolites and granites (1.88 Ga). The calc-alkaline volcanic rocks host epithermal Au and base metal mineralization, whereas Cu-Au and Cu-Mo ± Au porphyry-type mineralization is associated with sub-volcanic felsic rocks, formed in two continental magmatic arcs related to an accretionary event, resulting from an Andean-type northwards subduction. The Alta Floresta Gold Province consists of Paleoproterozoic plutono-volcanic sequences (1.98-1.75 Ga), generated in ocean-ocean orogenies. Disseminated and vein-type Au ± Cu and Au + base metal deposits are hosted by calc-alkaline I-type granitic intrusions (1.98 Ga, 1.90 Ga, and 1.87 Ga) and quartz-feldspar porphyries (ca. 1.77 Ga). Timing of the gold deposits has been constrained between 1.78 Ga and 1.77 Ga and linked to post-collisional Juruena arc felsic magmatism (e.g., Col

Neotectonics of central Japan and Izu-Bonin arc. Chuo Nippon no neotectonics to Izu Ogasawara ko

Energy Technology Data Exchange (ETDEWEB)

Takeuchi, A. (Toyama Univ., Toyama (Japan). College of Liberal Arts)

1991-08-25

Central Japan is the boundary region among the Northeast Japan arc (NEJ), which was parted from the Honshu arc accompanying the basin in the Japan sea area and the bending of Japan Islands, the Southwest Japan arc (SWJ) and the end of the Izu-Bonin arc (IOA), and involves the specific volcanic activity. In this report, the geohistory of the Late Cainozoic era in the central Japan was re-arranged and the neotectonics of the central Japan was tried to reorganize. Especially from a viewpoint that the central Japan is a juncture between the north end of the volcanic arc IOA (Fuji, Norikura and Hakusan volcanic belts) and the southwest end of the volcanic arc NEJ (Nasu and Chokai volcanic belts), the relation between the volcanic activity and tectonics from the Pliocene to Pleistocene has been mainly handled in the Hida region east of the Hakusan and in the northern Fossa Magna region. In addition to it, the tectonics was pointed out to be an indication of mechanical jointing state with IOA. Then the results of IOA drilling according to ODP, Leg 129 were referred as well, in order to compare with the transition of more typical volcanic activity in IOA. 61 refs., 4 figs.

U-Pb zircon geochronology, Sr-Nd isotope geochemistry, and petrogenesis of oxidant granitoids at Keybarkuh, southwest of Khaf

Directory of Open Access Journals (Sweden)

Ehsan Salati

2012-10-01

Full Text Available Keybarkuh area is located 70 km southwest of Khaf, Khorasan Razavi province. The study area is situated in northeastern Lut block. The rock units in the area are Paleozoic metamorphic rocks and Cretaceous to Tertiary subvolcanic intrusions intruded as dike, stock and batholith; their composition varies from granite to diorite. Based on magnetic susceptibility, the intrusive rocks are divided into oxidant and reduced series. In this study, the oxidant intrusions are discussed. These intrusions are mostly high-K to shoshonitic and also meta-aluminous type. Their magma formed in subduction magmatic arc and they belong to I-type granitoid series. Enrichment of Large Ion Lithophile Elements (LILE such as Rb, Cs, K, Ba, and Th relative to High Field Stength Elements (HFSE such as Nb, Zr, and Ti supported the idea. Enrichment of Light Rare Earth Elements (LREE and depletion of Heavy Rare Earth Elements (HREE are also typical of subduction magmatism. Negative anomalies of Eu/Eu* can be attributed to the presence of residual plagioclase in a mantle source and contamination of magma by reduced continental crust. The amount of Nb > 11 ppm, lower ratio of Zr/Nb 0.706, initial 143Nd/144Nd (> 0.512 and εNd (< -3.5 indicate that magma contaminated by reduced continental crust. Hornblende biotite granodiorite porphyry dated using U-Pb zircon geochronology at 43.44 Ma (Middle Eocene. Based on calculated TDM, magma derived from ancient slab with 820 Ma age in the Keybarkuh area, was affected by the highest continental crust contamination during its ascent.

Erosive effects of the storms HELENA (1963) and HUGO (1989) on Basse-Terre island (Guadeloupe - Lesser Antilles Arc).

Science.gov (United States)

Le Bivic, Rejanne; Allemand, Pascal; Delacourt, Christophe; Quiquerez, Amélie

2014-05-01

Basse-Terre is a volcanic island which belongs to the archipelago of Guadeloupe located in the Lesser Antilles Arc (Caribbean Sea). As a mountainous region in the tropical belt, Basse-Terre is affected by intense sediment transport due to extreme meteorological events. During the last fifty years, eight major tropical storms and hurricanes with intense rainfalls induced landslides and scars in the weathered layers. The purpose of this study is to compare two major meteorological events within a period of 26 years (HELENA in 10/1963 and HUGO in 09/1989) in order to qualify the parameters responsible of the spatial distribution of landslides and scars. The storm HELENA affected Basse-Terre between the 23rd and the 25th of October, 1963. The maximal daily rainfall reached 300 mm in Baillif which is located on the leeward coast at the altitude of 650 m while the maximum wind velocity reached 50 km/h. A similar exceptional event happened when the hurricane HUGO slammed the island in September 17, 1989. The maximum daily rainfall recorded in Sainte-Rose (on the northern coast) was 250 mm while it reached 208 mm in Petit-Bourg and the maximum wind speed was 60 km/h. Aerial images were acquired by the IGN (French Geographical Institute) before and a few weeks after the extreme events: less than three months after the event HELENA and less than a month after the event HUGO. Those images have been orthorectified at a metric resolution and combined in a GIS with a 10 m resolution DEM. Scars and landslides were digitalized and their surface area and mean slope were measured for both HELENA and HUGO. This work confirms several results proposed by a previous study related to the HELENA event: (1) the landslides occurred mainly in the center of the island and (2) the slope is the main parameter for the initiation of landslides, since all of them occurred with a slope superior to 30°. Furthermore, the resiliency of the surface affected by the landslides induced by HELENA was

Research on the spatial analysis method of seismic hazard for island

International Nuclear Information System (INIS)

Jia, Jing; Jiang, Jitong; Zheng, Qiuhong; Gao, Huiying

2017-01-01

Seismic hazard analysis(SHA) is a key component of earthquake disaster prevention field for island engineering, whose result could provide parameters for seismic design microscopically and also is the requisite work for the island conservation planning’s earthquake and comprehensive disaster prevention planning macroscopically, in the exploitation and construction process of both inhabited and uninhabited islands. The existing seismic hazard analysis methods are compared in their application, and their application and limitation for island is analysed. Then a specialized spatial analysis method of seismic hazard for island (SAMSHI) is given to support the further related work of earthquake disaster prevention planning, based on spatial analysis tools in GIS and fuzzy comprehensive evaluation model. The basic spatial database of SAMSHI includes faults data, historical earthquake record data, geological data and Bouguer gravity anomalies data, which are the data sources for the 11 indices of the fuzzy comprehensive evaluation model, and these indices are calculated by the spatial analysis model constructed in ArcGIS’s Model Builder platform. (paper)

Research on the spatial analysis method of seismic hazard for island

Science.gov (United States)

Jia, Jing; Jiang, Jitong; Zheng, Qiuhong; Gao, Huiying

2017-05-01

Seismic hazard analysis(SHA) is a key component of earthquake disaster prevention field for island engineering, whose result could provide parameters for seismic design microscopically and also is the requisite work for the island conservation planning’s earthquake and comprehensive disaster prevention planning macroscopically, in the exploitation and construction process of both inhabited and uninhabited islands. The existing seismic hazard analysis methods are compared in their application, and their application and limitation for island is analysed. Then a specialized spatial analysis method of seismic hazard for island (SAMSHI) is given to support the further related work of earthquake disaster prevention planning, based on spatial analysis tools in GIS and fuzzy comprehensive evaluation model. The basic spatial database of SAMSHI includes faults data, historical earthquake record data, geological data and Bouguer gravity anomalies data, which are the data sources for the 11 indices of the fuzzy comprehensive evaluation model, and these indices are calculated by the spatial analysis model constructed in ArcGIS’s Model Builder platform.

Petrological and geochemical characterization of the plutonic rocks of the Sierra de La Aguada, Province of San Luis, Argentina: Genetic implications with the Famatinian magmatic arc

Directory of Open Access Journals (Sweden)

E. Cristofolini

2017-07-01

Full Text Available This study presents a synthesis on the geology of the crystalline complex that constitute the Sierra de la Aguada, San Luis province, Argentine, from an approach based on field relations, petrologic and structural features and geochemical characteristic. This mountain range exposes a basement dominated by intermediate to mafic calcalkaline igneous rocks and peraluminous felsic granitoids, both emplaced in low to medium grade metamorphic rocks stabilized under low amphibolite facies. All this lithological terrane has been grouped in the El Carrizal-La Aguada Complex. Field relations, petrographic characterization and geochemical comparison of the plutonic rocks from the study area with those belonging to the Ordovician Famatinian suit exposed in the Sierra Grande de San Luis, suggest a genetic and temporal relation linked to the development of the Famatinian magmatic arc.

PRELIMINARY ANALYSIS OF THE EARTHQUAKE (MW 8.1 AND TSUNAMI OF APRIL 1, 2007, IN THE SOLOMON ISLANDS, SOUTHWESTERN PACIFIC OCEAN

Directory of Open Access Journals (Sweden)

Michael A. Fisher

2007-01-01

Full Text Available On April 1, 2007, a destructive earthquake (Mw 8.1 and tsunami struck the central Solomon Islands arc in the southwestern Pacific Ocean. The earthquake had a thrust-fault focal mechanism and occurred at shallow depth (between 15 km and 25 km beneath the island arc. The combined effects of the earthquake and tsunami caused dozens of fatalities and thousands remain without shelter. We present a preliminary analysis of the Mw-8.1 earthquake and resulting tsunami. Multichannel seismic- reflection data collected during 1984 show the geologic structure of the arc’s frontal prism within the earthquake’s rupture zone. Modeling tsunami-wave propagation indicates that some of the islands are so close to the earthquake epicenter that they were hard hit by tsunami waves as soon as 5 min. after shaking began, allowing people scant time to react.

Geochemical evidence for Paleozoic crustal growth and tectonic conversion in the Northern Beishan Orogenic Belt, southern Central Asian Orogenic Belt

Science.gov (United States)

Yuan, Yu; Zong, Keqing; He, Zhenyu; Klemd, Reiner; Jiang, Hongying; Zhang, Wen; Liu, Yongsheng; Hu, Zhaochu; Zhang, Zeming

2018-03-01

The Beishan Orogenic Belt is located in the central southernmost part of the Central Asian Orogenic Belt (CAOB), which plays a key role in understanding the formation and evolution of the CAOB. Granitoids are the documents of crustal and tectonic evolution in orogenic belts. However, little is known regarding the petrogenesis and geodynamic setting of the widely distributed Paleozoic granitoids in the Northern Beishan Orogenic Belt (NBOB). The present study reveals significant differences concerning the petrogenesis and tectonic setting of early and late Paleozoic granitoids from the NBOB. The early Paleozoic granitoids from the 446-430 Ma Hongliuxia granite complex of the Mazongshan unit and the 466-428 Ma Shibanjing complex of the Hanshan unit show classic I-type granite affinities as revealed by the relative enrichment of LILEs and LREEs, pronounced depletions of Nb, Ta and Ti and the abundant presence of hornblende. Furthermore, they are characterized by strongly variable zircon εHf(t) values between - 16.7 and + 12.8 and evolved plagioclase Sr isotopic compositions of 0.7145-0.7253, indicating the involvement of both juvenile and ancient continental crust in the magma source. Thus, we propose that the early Paleozoic granitoids in the NBOB were generated in a subduction-related continental arc setting. In contrast, the late Paleozoic 330-281 Ma granitoids from the Shuangjingzi complex of the Hanshan unit exhibit positive zircon εHf(t) values between + 5.8 and + 13.2 and relatively depleted plagioclase Sr isotopic compositions of 0.7037-0.7072, indicating that they were mainly formed by remelting of juvenile crust. Thus, an intra-plate extensional setting is proposed to have occurred during formation of the late Paleozoic granitoids. Therefore, between the early and late Paleozoic, the magma sources of the NBOB granitoids converted from the reworking of both juvenile and ancient crusts during a subduction-induced compressional setting to the remelting of

Clustering of arc volcanoes caused by temperature perturbations in the back-arc mantle.

Science.gov (United States)

Lee, Changyeol; Wada, Ikuko

2017-06-29

Clustering of arc volcanoes in subduction zones indicates along-arc variation in the physical condition of the underlying mantle where majority of arc magmas are generated. The sub-arc mantle is brought in from the back-arc largely by slab-driven mantle wedge flow. Dynamic processes in the back-arc, such as small-scale mantle convection, are likely to cause lateral variations in the back-arc mantle temperature. Here we use a simple three-dimensional numerical model to quantify the effects of back-arc temperature perturbations on the mantle wedge flow pattern and sub-arc mantle temperature. Our model calculations show that relatively small temperature perturbations in the back-arc result in vigorous inflow of hotter mantle and subdued inflow of colder mantle beneath the arc due to the temperature dependence of the mantle viscosity. This causes a three-dimensional mantle flow pattern that amplifies the along-arc variations in the sub-arc mantle temperature, providing a simple mechanism for volcano clustering.

Magma storage constrains by compositional zoning of plagioclase from dacites of the caldera forming eruptions of Vetrovoy Isthmus and Lvinaya Past’ Bay (Iturup Island, Kurile Islands)

Science.gov (United States)

Maksimovich, I. A.; Smirnov, S. Z.; Kotov, A. A.; Timina, T. Yu; Shevko, A. V.

2017-12-01

The Vetrovoy Isthmus and the Lvinaya Past’ Bay on the Iturup island (Kuril island arc) are the results of large Plinian eruptions of compositionally similar dacitic magmas. This study is devoted to a comparative analysis of the storage and crystallization conditions for magma reservoirs, which were a source of large-scale explosive eruptions. The plagioclase is most informative mineral in studying of the melt evolution. The studied plagioclases possess a complex zoning patterns, which are not typical for silicic rocks in island-arc systems. It was shown that increase of Ca in the plagioclase up to unusually high An95 is related to increase of H2O pressure in both volcanic magma chambers. The study revealed that minerals of the Vetrovoy Isthmus and Lvinaya Past’ crystallized from compositionally similar melts. Despite the compositional similarity of the melts, the phenocryst assemblage of the Lvinaya Past’ differs from the Vetrovoy Isthmus by the presence of the amphibole, which indicates that the pressure in the magmatic chamber exceeded 1-2 kbar at a 4-6 wt. % of H2O in the melt. The rocks of the Vetrovoy Isthmus do not contain amphibole phenocrysts, but melt and fluid inclusions assemblages in plagioclase demonstrate that the magma degassed in the course of evolution. This is an indication that the pressure did not exceed significantly 1-2 kbar.

Geochronology, petrogenesis and metallogeny of Piaotang granitoids in the tungsten deposit region of South China

International Nuclear Information System (INIS)

He Zhenyu; Xu Xisheng; Wang Xudong; Yu Yao; Zou Haibo

2010-01-01

The tungsten deposit region of South China is well known as the world's leading tungsten (W) producer. The Piaotang tungsten deposit in the region is such a representative large-scale quartz vein type tungsten polymetallic deposit that is closely associated with granitoids. In the present study we present precise LA-ICP-MS zircon U-Pb dating and LA-MC-ICPMS zircon Hf isotopic data for the samples from exposed quartz diorite body and buried granite stock in the Piaotang tungsten deposit area. Zircon U-Pb dating results indicate that the quartz diorite body was formed in Early Paleozoic time at 439±2 Ma, whereas the granite body was emplaced in EarlyYanshanian time at 158±3 Ma. Both the quartz diorite and granite have negative ε Hf (t) values, with similar two-stage zircon Hf model ages ranging from 1.8 to 2.1 Ga. Through integration of our new data with the isotope data of Precambrian basement rocks in western Cathaysia, we suggest that the Paleoproterozoic Hf model ages (1.8-2.1 Ga) might be an average age which resulted from mixing of continental materials of different ages. Both the Piaotang Early Paleozoic quartz diorite and Early Yanshanian granite are produced by reworking of the heterogeneous Neoproterozoic crust. Our zircon ages, together with the geochemical data and geological features and ore-forming ages of this tungsten deposit, indicate that the buried Early Yanshanian granite, rather than the exposed quartz diorite, is genetically associated with tungsten mineralization. The distinct metallogeny difference between the Piaotang Early Paleozoic quartz diorite and Early Yanshanian granite can be ascribed to the different degrees of magma differentiation. The Early Yanshanian granite is highly differentiated rock and similar to the other W-Sn deposits generating granitoids in South China. The extents of magma differentiation depend on the tectonic setting and the mechanism of magma generation. On the basis of the relationship between two different

Behaviour of {sup 238}U, {sup 234}U, {sup 228}Ra and {sup 226}Ra in rock alterations: study of Morungaba granitoids, SP-Brazil and ground water in its fractures; Comportamento de {sup 238}U, {sup 234}U, {sup 228}Ra e {sup 226}Ra na alteracao de rochas: estudo dos granitoides de Morungaba (SP) e aguas subterraneas de suas fraturas

Energy Technology Data Exchange (ETDEWEB)

Santos, Rosana N. dos [Pontificia Univ. Catolica de Sao Paulo, SP (Brazil). Dept. de Fisica]. E-mail: rosana@pucsp.br; Marques, Leila S. [Sao Paulo Univ., SP (Brazil). Inst. de Astronomia, Geofisica e Ciencias Atmosfericas. Dept. de Geofisica]. E-mail: leila@iag.usp.br

2005-07-01

This work presents the first results obtained on the investigation of the behavior of uranium and radium radioisotopes in the processes of weathering and rock-water interaction of Morungaba granitoids belonging to Meridional Pluton (Valinhos Town-SP-Brazil). Specific activities of {sup 238}U, {sup 234}U, {sup 228}Ra and {sup 226}Ra were determined in non altered granitoids (Group A), as well as in those affected by different degrees of weathering (Groups B, C and D). The uranium specific activities were determined by alpha spectrometry method, whereas for the determination of radium isotopes high resolution gamma-ray spectrometry technique was employed. The data indicate that {sup 238}U and {sup 234}U are in radioactive equilibrium in the fresh analyzed granitoids, but show a slight depletion of {sup 234}U in relation to {sup 238}U in the weathered rocks. The ({sup 226}Ra/{sup 238}U) and ({sup 226}Ra/{sup 234}U) activity ratios of all investigated rocks are similar, showing a significant {sup 226}Ra depletion, which is probably caused by its preferential leaching. These results indicate that even samples macroscopically classified as fresh rocks, their systems have been opened for some geochemical changes. The high ({sup 234}U/{sup 238}U) activity ratios of groundwaters which are found in the fractures of these granitoids suggest their prolonged residence times in the aquifer and/or their percolation by other rocks presenting different geochemical properties. (author)

Magnesium Isotopes as a Tracer of Crustal Materials in Volcanic Arc Magmas in the Northern Cascade Arc

Directory of Open Access Journals (Sweden)

Aaron W. Brewer

2018-03-01

Full Text Available Fifteen North Cascade Arc basalts and andesites were analyzed for Mg isotopes to investigate the extent and manner of crustal contributions to this magmatic system. The δ26Mg of these samples vary from within the range of ocean island basalts (the lightest being −0.33 ± 0.07‰ to heavier compositions (as heavy as −0.15 ± 0.06‰. The observed range in chemical and isotopic composition is similar to that of other volcanic arcs that have been assessed to date in the circum-pacific subduction zones and in the Caribbean. The heavy Mg isotope compositions are best explained by assimilation and fractional crystallization within the deep continental crust with a possible minor contribution from the addition of subducting slab-derived fluids to the primitive magma. The bulk mixing of sediment into the primitive magma or mantle source and the partial melting of garnet-rich peridotite are unlikely to have produced the observed range of Mg isotope compositions. The results show that Mg isotopes may be a useful tracer of crustal input into a magma, supplementing traditional methods such as radiogenic isotopic and trace element data, particularly in cases in which a high fraction of crustal material has been added.

Crustal evolution derived from the Izu-Bonin-Mariana arc velocity images

Science.gov (United States)

Takahashi, N.; Kodaira, S.; Tatsumi, Y.; Miura, S.; Sato, T.; Yamashita, M.; No, T.; Takahashi, T.; Noguchi, N.; Takizawa, K.; Kaiho, Y.; Kaneda, Y.

2010-12-01

The Izu-Bonin-Mariana arc is known as one of typical oceanic island arcs, which has developed by subduction between oceanic crusts producing continental materials. Japan Agency for Marine-Earth Science and Technology has carried out seismic surveys using a multi-channel reflection survey system (MCS) and ocean bottom seismographs (OBSs) in the Izu-Bonin-Mariana (IBM) arc since 2002, and reported these crustal images. As the results, we identified the structural characteristics of whole Izu-Bonin-Mariana arc. Rough structural characteristics are, 1) middle crust with Vp of 6 km/s, 2) upper part of the lower crust with Vp of 6.5-6.8 km/s, 3) lower part of the lower crust with Vp of 6.8-7.5 km/s, and 4) lower mantle velocity beneath the arc crusts. In addition, structural variation along the volcanic front, for example, thickness variation of andesitic layers was imaged and the distributions is consistent with those of rhyolite volcanoes, that is, it suggested that the cause the structural variation is various degree of crustal growth (Kodaira et al., 2007). Moreover, crustal thinning with high velocity lower crust across arc was also imaged, and it is interpreted that such crust has been influenced backarc opening (Takahashi et al., 2009). According to Tatsumi et al. (2008), andesitic middle crust is produced by differentiation of basaltic lower crust and a part of the restites are transformed to the upper mantle. This means that region showing much crustal differentiation has large volume of transformation of dense crustal materials to the mantle. We calculated volume profiles of the lower crust along all seismic lines based on the petrologic model, and compared them with observed real volumes obtained by seismic images. If the real volume of the lower crust is large, it means that the underplating of dense materials to the crustal bottom is dominant rather than transformation of dense materials to the upper mantle. According to obtained profiles to judge if the

Critical Length Criterion and the Arc Chain Model for Calculating the Arcing Time of the Secondary Arc Related to AC Transmission Lines

International Nuclear Information System (INIS)

Cong Haoxi; Li Qingmin; Xing Jinyuan; Li Jinsong; Chen Qiang

2015-01-01

The prompt extinction of the secondary arc is critical to the single-phase reclosing of AC transmission lines, including half-wavelength power transmission lines. In this paper, a low-voltage physical experimental platform was established and the motion process of the secondary arc was recorded by a high-speed camera. It was found that the arcing time of the secondary arc rendered a close relationship with its arc length. Through the input and output power energy analysis of the secondary arc, a new critical length criterion for the arcing time was proposed. The arc chain model was then adopted to calculate the arcing time with both the traditional and the proposed critical length criteria, and the simulation results were compared with the experimental data. The study showed that the arcing time calculated from the new critical length criterion gave more accurate results, which can provide a reliable criterion in term of arcing time for modeling and simulation of the secondary arc related with power transmission lines. (paper)

Arc saw development report

International Nuclear Information System (INIS)

Deichelbohrer, P.R.; Beitel, G.A.

1981-01-01

The arc saw is one of the key components of the Contaminated Equipment Volume Reduction (CEVR) Program. This report describes the progress of the arc saw from its inception to its current developmental status. History of the arc saw and early contributors are discussed. Particular features of the arc saw and their advantages for CEVR are detailed. Development of the arc saw including theory of operation, pertinent experimental results, plans for the large arc saw and advanced control systems are covered. Associated topics such as potential applications for the arc saw and other arc saw installations in the world is also touched upon

Auroral arc classification scheme based on the observed arc-associated electric field pattern

International Nuclear Information System (INIS)

Marklund, G.

1983-06-01

Radar and rocket electric field observations of auroral arcs have earlier been used to identify essentially four different arc types, namely anticorrelation and correlation arcs (with, respectively, decreased and increased arc-assocaited field) and asymmetric and reversal arcs. In this paper rocket double probe and supplementary observations from the literature, obtained under various geophysical conditions, are used to organize the different arc types on a physical rather than morphological basis. This classification is based on the relative influence on the arc electric field pattern from the two current continuity mechanisms, polarisation electric fields and Birkeland currents. In this context the tangential electric field plays an essential role and it is thus important that it can be obtained with both high accuracy and resolution. In situ observations by sounding rockets are shown to be better suited for this specific task than monostatic radar observations. Depending on the dominating mechanism, estimated quantitatively for a number of arc-crossings, the different arc types have been grouped into the following main categories: Polarisation arcs, Birkeland current arcs and combination arcs. Finally the high altitude potential distributions corresponding to some of the different arc types are presented. (author)

Across-arc versus along-arc Sr-Nd-Pb isotope variations in the Ecuadorian volcanic arc

Science.gov (United States)

Ancellin, Marie-Anne; Samaniego, Pablo; Vlastélic, Ivan; Nauret, François; Gannoun, Adbelmouhcine; Hidalgo, Silvana

2017-03-01

Previous studies of the Ecuadorian arc (1°N-2°S) have revealed across-arc geochemical trends that are consistent with a decrease in mantle melting and slab dehydration away from the trench. The aim of this work is to evaluate how these processes vary along the arc in response to small-scale changes in the age of the subducted plate, subduction angle, and continental crustal basement. We use an extensive database of 1437 samples containing 71 new analyses, of major and trace elements as well as Sr-Nd-Pb isotopes from Ecuadorian and South Colombian volcanic centers. Large geochemical variations are found to occur along the Ecuadorian arc, in particular along the front arc, which encompasses 99% and 71% of the total variations in 206Pb/204Pb and 87Sr/86Sr ratios of Quaternary Ecuadorian volcanics, respectively. The front arc volcanoes also show two major latitudinal trends: (1) the southward increase of 207Pb/204Pb and decrease of 143Nd/144Nd reflect more extensive crustal contamination of magma in the southern part (up to 14%); and (2) the increase of 206Pb/204Pb and decrease of Ba/Th away from ˜0.5°S result from the changing nature of metasomatism in the subarc mantle wedge with the aqueous fluid/siliceous slab melt ratio decreasing away from 0.5°S. Subduction of a younger and warmer oceanic crust in the Northern part of the arc might promote slab melting. Conversely, the subduction of a colder oceanic crust south of the Grijalva Fracture Zone and higher crustal assimilation lead to the reduction of slab contribution in southern part of the arc.

Geophysical characteristics of the Ninetyeast Ridge–Andaman island arc/trench convergent zone

Digital Repository Service at National Institute of Oceanography (India)

Subrahmanyam, C.; Gireesh, R.; Chand, S.; KameshRaju, K.A.; Rao, D.G.

] N. Furus, Y. Kono, Slab residual gravity anomaly: gravity reduction due to subducting plates beneath the Japanese Islands, J. Geodyn. 36 (2003) 497-514. 19 [15] S Dasgupta, M. Mukhopadhyay, A. Bhattacharya, T. K. Jana, The geometry...

The southwestern extension of the Jiao-Liao-Ji belt in the North China Craton: Geochronological and geochemical evidence from the Wuhe Group in the Bengbu area

Science.gov (United States)

Liu, Chaohui; Zhao, Guochun; Liu, Fulai; Cai, Jia

2018-04-01

The Wuhe complex is located at the southeastern margin of the North China Craton. The complex consists of metamorphosed Paleoproterozoic potassic granitoids and supracrustal rocks, of which the latter include the Fengyang and Wuhe groups. Meta-mafic rocks from the lower Wuhe Group have igneous zircon U-Pb ages of 2126 ± 37 Ma with εHf(t) values of -6.22 to +8.38, and xenocrystic zircons of 2.39-2.36 Ga, 2.55-2.54 Ga and 2.77-2.69 Ga. Geochemically, the meta-mafic rocks can be classified into two groups. Group 1 island arc tholeiites display flat to slightly right declined REE patterns and moderately negative Nb, Ta, Zr, and Ti anomalies. Group 2 mature arc calcalkaline basalts display strongly fractionated chondrite-normalized REE patterns and evidently negative Nb, Ta and Ti anomalies. These meta-mafic rocks formed by partial melting of sub-arc depleted mantle wedge which had been modified by slab-derived melts at an active continental margin. Depositional age of the group can be constrained in the period of 2.16-2.10 Ga based on ages of the youngest detrital zircons and latter intrusions. U-Pb ages of detrital zircons yield major age peaks of 2.69 Ga and 2.52 Ga, with minor peaks at 2.88 Ga, 2.78 Ga, 2.35 Ga and 2.17 Ga, most of which are derived from the late Mesoarchean to early Paleoproterozoic granitoids in the Wuhe complex and the Jiaodong Terrane. Metamorphic zircons in the marbles coexisting with garnet amphibolites or granulites occur as either single grains or overgrowth (or recrystallization) rims surrounding magmatic zircon cores and yield ages of 1882 ± 19 Ma to 1844 ± 15 Ma. The comparable ca. 2.1 Ga potassic granites with A-type granite affinity, the ca. 2.1 Ga meta-mafic rocks with arc-like geochemical features, the 2.1-1.9 Ga meta-sedimentary units and the 1.9-1.8 Ga subduction- and collision-related granulite-facies metamorphism suggest that the Wuhe complex and the Jiao-Liao-Ji Belt share the same late Paleoproterozoic tectonic evolution

The Continental Margin of East Asia: a collage of multiple plates formed by convergence and extension from multiple directions

Science.gov (United States)

Mao, J.; Wang, T.; Ludington, S.; Qiu, Z.; Li, Z.

2017-12-01

East Asia is one of the most complex regions in the world. Its margin was divided into 4 parts: Northeast Asia, North China, South China and Southeast Asia. During the Phanerozoic, continental plates of East Asia have interacted successively with a) the Paleo Tethyan Ocean, b) the Tethyan and Paleo Pacific Oceans and c) the Pacific and Indian. In the Early Mesozoic, the Indosinian orogeny is characterized by the convergence and extension within multiple continental plates, whereas the Late Mesozoic Yanshanian orogeny is characterized by both convergence and compression due to oceanic subduction and by widespread extension. We propose this combination as "East Asia Continental Margin type." Except in Northeast Asia, where Jurassic and Cretaeous accretionary complexes are common, most magmatic rocks are the result of reworking of ancient margins of small continental plates; and oceanic island arc basalts and continental margin arc andesites are largely absent. Because South China is adjacent to the western margin of the Pacific Plate, some effects of its westward subduction must be unavoidable, but juvenile arc-related crust has not been identified. The East Asian Continental Margin is characterized by magmatic rocks that are the result of post-convergent tectonics, which differs markedly from the active continental margins of both South and North America. In summary, the chief characteristics of the East Asian Continental Margin are: 1) In Mesozoic, the periphery of multiple blocks experienced magmatism caused by lithospheric delamination and thinning in response to extension punctuated by shorter periods of convergence. 2) The main mechanism of magma generation was the partial melting of crustal rocks, due to underplating by upwelling mafic magma associated with the collapse of orogenic belts and both extension and compression between small continental blocks. 3) During orogeny, mostly high Sr/Y arc-related granitoids formed, whereas during post-orogenic times, A

Geology and geochemistry of Massangana Granitoid Complex, Brazil, and its relation with tin mineralization

International Nuclear Information System (INIS)

Romanini, S.J.

1982-01-01

The geochemical and petroLogical characteristics of the Massangana Granitoid Complex, situated in the Rondonia Federal Territory, Brazil, aiming to discriminate the tin mineralized granitic rocks from the no mineralized ones. The collected samples consists of examples in tin mineralized and sterile phases. The elements traces were determined by x-ray fluorescence analysis, emission spectrography, molecular absorption spectrophotometry and atomic absorption spectrophotometry. The complex edifying evolved in four sucessive episodes called Massangana Phase, Bom Jardim Phase, Sao domingos Phase and Taboca Phase ordered stratigraphycally in this sequence. (author/M.C.K.) [pt

Influence of arc current and pressure on non-chemical equilibrium air arc behavior

Science.gov (United States)

Yi, WU; Yufei, CUI; Jiawei, DUAN; Hao, SUN; Chunlin, WANG; Chunping, NIU

2018-01-01

The influence of arc current and pressure on the non-chemical equilibrium (non-CE) air arc behavior of a nozzle structure was investigated based on the self-consistent non-chemical equilibrium model. The arc behavior during both the arc burning and arc decay phases were discussed at different currents and different pressures. We also devised the concept of a non-equilibrium parameter for a better understanding of non-CE effects. During the arc burning phase, the increasing current leads to a decrease of the non-equilibrium parameter of the particles in the arc core, while the increasing pressure leads to an increase of the non-equilibrium parameter of the particles in the arc core. During the arc decay phase, the non-CE effect will decrease by increasing the arc burning current and the nozzle pressure. Three factors together—convection, diffusion and chemical reactions—influence non-CE behavior.

The dual-electrode DC arc furnace-modelling brush arc conditions

OpenAIRE

Reynolds, Q.G.

2012-01-01

The dual-electrode DC arc furnace, an alternative design using an anode and cathode electrode instead of a hearth anode, was studied at small scale using computational modelling methods. Particular attention was paid to the effect of two key design variables, the arc length and the electrode separation, on the furnace behaviour. It was found that reducing the arc length to brush arc conditions was a valid means of overcoming several of the limitations of the dual-electrode design, namely high...

Field, geochemistry and Sr-Nd isotopes of the Pan-African granitoids from the Tifnoute Valley (Sirwa, Anti-Atlas, Morocco): a post-collisional event in a metacratonic setting

Science.gov (United States)

Toummite, A.; Liegeois, J. P.; Gasquet, D.; Bruguier, O.; Beraaouz, E. H.; Ikenne, M.

2013-10-01

In the Tifnoute Valley, three plutonic units have been defined: the Askaoun intrusion, the Imourkhssen intrusion and the Ougougane group of small intrusions. They are made of quartz diorite, granodiorite and granite and all contain abundant mafic microgranular enclaves (MME). The Askaoun granodiorite and the Imourkhssen granite have been dated by LA-ICP-MS on zircon at 558 ± 2 Ma and 561 ± 3 Ma, respectively. These granitic intrusions are subcontemporaneous to the widespread volcanic and volcano-detrital rocks from the Ouarzazate Group (580-545 Ma), marking the post-collisional transtensional period in the Anti-Atlas and which evolved towards alkaline and tholeiitic lavas in minor volume at the beginning of the Cambrian anorogenic intraplate extensional period. Geochemically, the Tifnoute Valley granitoids belong to an alkali-calcic series (high-K calc-alkaline) with typical Nb-Ta negative anomalies and no alkaline affinities. Granitoids and enclaves display positive ɛNd-560Ma (+0.8 to +3.5) with young Nd-TDM between 800 and 1200 Ma and relatively low 87Sr/86Sr initial ratios (Sri: 0.7034 and 0.7065). These values indicate a mainly juvenile source corresponding to a Pan-African metasomatized lithospheric mantle partly mixed with an old crustal component from the underlying West African Craton (WAC). Preservation in the Anti-Atlas of pre-Pan-African lithologies (c. 2.03 Ga basement, c. 800 Ma passive margin greenschist-facies sediments, allochthonous 750-700 Ma ophiolitic sequences) indicates that the Anti-Atlas lithosphere has not been thickened and was never an active margin during the Neoproterozoic. After a transpressive period, the late Ediacaran period (580-545 Ma) is marked by movement on near vertical transtensional faults, synchronous with the emplacement of the huge Ouarzazate Group and the Tifnoute Valley granitoids. We propose here a geodynamical model where the Tifnoute Valley granitoids as well as the Ouarzazate Group were generated during the post

Pliocene-Quaternary history of Futuna island, south Vanuatu, southwest Pacific

International Nuclear Information System (INIS)

Neef, G.; McCulloch, M.T.

2001-01-01

Uranium-series ages from thermal ionisation mass spectrometry are reported here for the raised coral reefs of Futuna Island, which lies adjacent to the eastern margin of the backarc Futuna Trough in south Vanuatu, southwest Pacific. U-series ages from coral from the lowest raised reef indicate that its upper part is most likely to be ca 210 ka, whereas the most elevated raised reef has a likely age of ca 520 ka (range 600-440 ka). The inferred Pliocene-Quaternary history for Futuna Island and the adjacent Futuna Trough is: (i) formation of the Pliocene - Early Quaternary basaltic-andesite cone in a southeast part of the Vanuatu Island Arc; (ii) inception of the Futuna Trough (adjacent to the west margin of Futuna Island) since 1.8Ma; (iii) subsequent uplift of the volcanic cone above sea-level caused ∼ 500 m of its upper part to be removed by marine erosion; (iv) the island then subsided and at least 160 m of limestone was deposited on the truncated cone; and (v) during the period 520 ka to ca 210 ka seven fringing reefs formed at the margin of the cone as the island was uplifted. Since ca 210 ka Futuna further subsided and, as a result, the post ca 210 ka history of the island is obscure. Copyright (2001) Geological Society of Australia

THE REDSHIFT DISTRIBUTION OF GIANT ARCS IN THE SLOAN GIANT ARCS SURVEY

International Nuclear Information System (INIS)

Bayliss, Matthew B.; Gladders, Michael D.; Koester, Benjamin P.; Oguri, Masamune; Hennawi, Joseph F.; Sharon, Keren; Dahle, Haakon

2011-01-01

We measure the redshift distribution of a sample of 28 giant arcs discovered as a part of the Sloan Giant Arcs Survey. Gemini/GMOS-North spectroscopy provides precise redshifts for 24 arcs, and 'redshift desert' constrains for the remaining 4 arcs. This is a direct measurement of the redshift distribution of a uniformly selected sample of bright giant arcs, which is an observable that can be used to inform efforts to predict giant arc statistics. Our primary giant arc sample has a median redshift z = 1.821 and nearly two-thirds of the arcs, 64%, are sources at z ∼> 1.4, indicating that the population of background sources that are strongly lensed into bright giant arcs resides primarily at high redshift. We also analyze the distribution of redshifts for 19 secondary strongly lensed background sources that are not visually apparent in Sloan Digital Sky Survey imaging, but were identified in deeper follow-up imaging of the lensing cluster fields. Our redshift sample for the secondary sources is not spectroscopically complete, but combining it with our primary giant arc sample suggests that a large fraction of all background galaxies that are strongly lensed by foreground clusters reside at z ∼> 1.4. Kolmogorov-Smirnov tests indicate that our well-selected, spectroscopically complete primary giant arc redshift sample can be reproduced with a model distribution that is constructed from a combination of results from studies of strong-lensing clusters in numerical simulations and observational constraints on the galaxy luminosity function.

Isotopic composition of strontium in three basalt-andesite centers along the Lesser Antilles arc

Science.gov (United States)

Hedge, C.E.; Lewis, J.F.

1971-01-01

Si87/Sr86 ratios have been determined for lavas and py lastic rocks from three basalt-andesite centers along the Lesser Antilles arc-Mt. Misery on the island of St. Kitts, Soufriere on the island of St. Vincent, and Carriacou, an island of The Grenadines. The average Si87/Sr86 content of these rocks is 0.7038 for Mt. Misery, 0.7041 for Soufriere, and 0.7053 for Carriacou. All the Sr87/Sr86 values from each center are the same within analytical uncertainty (??0.0002). The constancy of strontium isotopic data within each center supports the hypothesis that basalts and andesites for each specific center investigated are generated from the same source - in agreement with petrographic and major- and minor-element data. Strontium isotopic compositions and elemental concentrations, particularly of strontium and nickel, indicate that this source was mantle peridotite and that the relationship between the respective basalts and andesites is probably fractional crystallization. ?? 1971 Springer-Verlag.

Sunda-Banda Arc Transition: Marine Wide-Angle Seismic Modeling

Science.gov (United States)

Shulgin, A.; Planert, L.; Kopp, H.; Mueller, C.; Lueschen, E.; Engels, M.; Flueh, E.; Djajadihardja, Y.; Sindbad Working Group, T

2008-12-01

The Sunda-Banda Arc transition is the region of active convergence and collision of the Indo-Australian and Eurasian Plates. The style of subduction changes from an oceanic-island arc subduction to a continental- island arc collision. The character of the incoming plate varies from the rough topography of the Roo Rise, to the smooth seafloor of the Abyssal Plain off Bali, Sumbawa. Forearc structures include well-developed forearc basins and an accretionary prism/outer forearc high of variable size and shape. To quantify the variability of structure of the lower plate and the effects on the upper plate a refraction seismic survey was carried during cruise SO190-2. A total of 245 ocean bottom seismometers were deployed along 1020 nm of wide-angle seismic profiles in four major north-south oriented corridors. To assess the velocity structure we used a tomographic method which jointly inverts for refracted and reflected phases. The sedimentary layers of the models, obtained by the analysis of high-resolution MCS data (see Lueschen et al), were incorporated into the starting model. The obtained models exhibit strong changes of the incoming oceanic crust for the different portions of the margin: The westernmost profile off eastern Java shows a crustal thickness of more than 15 km, most likely related to the presence of an oceanic plateau. Profiles off Lombok reveal an oceanic crust of 8-9 km average thickness in the Argo Abyssal Plain. Crustal and upper mantle velocities are slightly decreased within an area of about 50-60 km seaward of the trench, indicating fracturing and related serpentinization due to bending of the oceanic crust and associated normal faulting. The outer forearc high is characterized by velocities of 2.5-5.5 km/s. For the Lombok Basin, the profiles show a sedimentary infill of up to 3.5 km thick and typical sediment velocities of 1.75-3.0 km/s. A reflector at 16 km depth and velocity values of 7.4-7.8 km/s beneath it suggest the presence of a shallow

Old inherited zircons in two synkinematic variscan granitoids: the 'granite du Pinet' and the 'Orthogneiss de Marvejols' (Southern French Massif Central)

International Nuclear Information System (INIS)

Pin, C.

1981-01-01

Two granitic bodies outcropping in the metamorphic basement of the Southern French Massif Central have been studied with the zircon U-Pb method: the Pinet granite (Rouergue area) and the Marvejols orthogneisses (Serie du Lot). It is shown that neither of them are pre-Variscan intrusions but that they were emplaced synkinematically, during the early stages of the Hercynian tectonometamorphic event. As numerous other S-type granitoids, both formations are characterized by an important inherited zircon component, whose apparent age is 1800 +- 200 m.y. Lower intersections with the Concordia curve allow to settle an emplacement age around 350-360 m.y., although the Pinet zircons display a complex pattern, owing both to heterogeneity of the inherited component and to late isotopic disturbances. Regional consequences of the synkinematic character of these S-type granitoids are outlined. It is shown that inherited zircons occurences often hinder accurate dating and the possible petrogenetic significance of the old proterozoic component is discussed. (orig.)

The Sunda-Banda Arc Transition: New Insights From Marine Wide-Angle Seismic Data

Science.gov (United States)

Planert, L.; Shulgin, A.; Kopp, H.; Mueller, C.; Flueh, E.; Lueschen, E.; Engels, M.; Dayuf Jusuf, M.

2007-12-01

End of 2006, RV SONNE cruise SO190 SINDBAD (Seismic and Geoacoustic Investigations along the Sunda- Banda Arc Transition) went south of the Indonesian archipelago to acquire various geophysical datasets between 112 °E and 122 °E. The main goal of the project is to investigate the modifications of the lower plate (variability in the plate roughness, transition from oceanic to continental lower plate) and their effects on the tectonics of the upper plate (development of an outer high and forearc basin, accretionary and erosive processes). The tectonic style changes in neighboring margin segments from an oceanic plate-island arc subduction along the eastern Sunda margin to a continental plate-island arc collision along the Banda margin. Moreover, the character of the incoming oceanic plate varies from the rough topography in the area where the Roo Rise is subducting off eastern Java, to the smooth oceanic seafloor of the Argo- Abyssal Plain subducting off Bali, Lombok, and Sumbawa. In order to cover the entire variations of the lower plate, seven seismic refraction profiles were conducted along four major north-south oriented corridors of the margin, at 113 °E, 116 °E, 119 °E, and 121 °E, as well as three profiles running perpendicular to the major corridors. A total of 239 ocean bottom hydrophone and seismometer deployments were successfully recovered. Shooting was conducted along 1020 nm of seismic profiles using a G-gun cluster of 64 l. Here, we present velocity models obtained by applying a tomographic approach which jointly inverts for refracted and reflected phases. Additional geometry and velocity information for the uppermost layers, obtained by prestack depth migration of multichannel seismic reflection data (see poster of Mueller et al. in this session), is incorporated into our models and held fixed during the iterations. geomar.de/index.php?id=sindbad

VoiLA: A multidisciplinary study of Volatile recycling in the Lesser Antilles Arc

Science.gov (United States)

Collier, J.; Blundy, J. D.; Goes, S. D. B.; Henstock, T.; Harmon, N.; Kendall, J. M.; Macpherson, C.; Rietbrock, A.; Rychert, C.; Van Hunen, J.; Wilkinson, J.; Wilson, M.

2017-12-01

Project VoiLA will address the role of volatiles in controlling geological processes at subduction zones. The study area was chosen as it subducts oceanic lithosphere formed at the slow-spreading Mid Atlantic Ridge. This should result in a different level and pattern of hydration to compare with subduction zones in the Pacific which consume oceanic lithosphere generated at faster spreading rates. In five project components, we will test (1) where volatiles are held within the incoming plate; (2) where they are transported and released below the arc; (3) how the volatile distribution and pathways relate to the construction of the arc; and (4) their relationship to seismic and volcanic hazards and the fractionation of economic metals. Finally, (5) the behaviour of the Lesser Antilles arc will be compared with that of other well-studied systems to improve our wider understanding of the role of water in subduction processes. To address these questions the project will combine seismology; petrology and numerical modelling of wedge dynamics and its consequences on dehydration and melting. So-far island-based fieldwork has included mantle xenolith collection and installation of a temporary seismometer network. In 2016 and 2017 we conducted cruises onboard the RRS James Cook that collected a network of passive-recording and active-recording ocean-bottom seismometer data within the back-arc, fore-arc and incoming plate region. A total of 175 deployments and recoveries were made with the loss of only 6 stations. The presentation will present preliminary results from the project.

Tectonomagmatic evolution of the proto Andean Margin: Geochemical characterization and zircon U-Pb geochronologic constraints from the Ecuadorian Eastern Cordilleran granitoids

Science.gov (United States)

Buchwaldt, R.; Toulkeridis, T.

2013-05-01

the northern Andes from Peru to Columbia. The occurrence of numerous granite intrusions during Triassic times along the South American margin indicates that western South America underwent a widespread thermal anomaly between 250 and 210 Ma, which produced large amounts of granitoids. We argue that this occurrence is associated with the closure of the Panthalassan Gondwana sutur between 200 and 300 Ma and the correlated magmatism is related to the development of strike-slip tectonics subparallel to the proto-Andean margin. Contrasting to the older episode the younger magmatics appears to be the ultimate dispersal of Gondwana in the Cretaceous, which has been followed by the establishment of a continental arc that has intermittently characterized the modern Andean orogeny for the past 180 Ma.

Plan quality comparison between 4-arc and 6-arc noncoplanar volumetric modulated arc stereotactic radiotherapy for the treatment of multiple brain metastases.

Science.gov (United States)

Yoshio, Kotaro; Mitsuhashi, Toshiharu; Wakita, Akihisa; Kitayama, Takahiro; Hisazumi, Kento; Inoue, Daisaku; Shiode, Tsuyoki; Akaki, Shiro; Kanazawa, Susumu

2018-01-04

To compare the plans of 4-arc and 6-arc noncoplanar volumetric modulated arc stereotactic radiotherapy (VMA-SRT) for multiple brain metastases and to investigate the cutoff value for the tumor number and volume for 6-arc rather than 4-arc VMA-SRT. We identified 24 consecutive multiple-target cases (3 to 19 targets in each case) with 189 total targets. We constructed plans using both 4- and 6-arc noncoplanar VMA-SRT. The prescribed dose was 36 Gy/6 fr, and it was delivered to 95% of the planning target volume (PTV). The plans were evaluated for the dose conformity using the Radiation Therapy Oncology Group and Paddick conformity indices (RCI and PCI), fall-off (Paddick gradient index [PGI]), and the normal brain dose. The median (range) RCI, PCI, and PGI was 0.94 (0.92 to 0.99), 0.89 (0.77 to 0.94), and 3.75 (2.24 to 6.54) for the 4-arc plan and 0.94 (0.91 to 0.98), 0.89 (0.76 to 0.94), and 3.65 (2.24 to 6.5) for the 6-arc plan, respectively. The median (range) of the normal brain dose was 910.3 cGy (381.4 to 1268.9) for the 4-arc plan and 898.8 cGy (377 to 1252.9) for the 6-arc plan. The PGI of the 6-arc plan was significantly superior to that of the 4-arc plan (p = 0.0076), and the optimal cutoff values for the tumor number and volume indicative of 6-arc (and not 4-arc) VMA-SRT were cases with ≥ 5 metastases and a PTV of ≥ 12.9 mL, respectively. The PCI values, however, showed no significant difference between the 2 plans. We believe these results will help in considering the use of 6-arc VMA-SRT for multiple brain metastases. Copyright © 2017 American Association of Medical Dosimetrists. Published by Elsevier Inc. All rights reserved.

Arc dynamics of a pulsed DC nitrogen rotating gliding arc discharge

Science.gov (United States)

Zhu, Fengsen; Zhang, Hao; Li, Xiaodong; Wu, Angjian; Yan, Jianhua; Ni, Mingjiang; Tu, Xin

2018-03-01

In this study, a novel pulsed direct current (DC) rotating gliding arc (RGA) plasma reactor co-driven by an external magnetic field and a tangential gas flow has been developed. The dynamic characteristics of the rotating gliding arc have been investigated by means of numerical simulation and experiment. The simulation results show that a highly turbulent vortex flow can be generated at the bottom of the RGA reactor to accelerate the arc rotation after arc ignition, whereas the magnitude of gas velocity declined significantly along the axial direction of the RGA reactor. The calculated arc rotation frequency (14.4 Hz) is reasonably close to the experimental result (18.5 Hz) at a gas flow rate of 10 l min-1. In the presence of an external magnet, the arc rotation frequency is around five times higher than that of the RGA reactor without using a magnet, which suggests that the external magnetic field plays a dominant role in the maintenance of the arc rotation in the upper zone of the RGA reactor. In addition, when the magnet is placed outside the reactor reversely to form a reverse external magnetic field, the arc can be stabilized at a fixed position in the inner wall of the outer electrode at a critical gas flow rate of 16 l min-1.

UAV-based detection and spatial analyses of periglacial landforms on Demay Point (King George Island, South Shetland Islands, Antarctica)

Science.gov (United States)

Dąbski, Maciej; Zmarz, Anna; Pabjanek, Piotr; Korczak-Abshire, Małgorzata; Karsznia, Izabela; Chwedorzewska, Katarzyna J.

2017-08-01

High-resolution aerial images allow detailed analyses of periglacial landforms, which is of particular importance in light of climate change and resulting changes in active layer thickness. The aim of this study is to show possibilities of using UAV-based photography to perform spatial analysis of periglacial landforms on the Demay Point peninsula, King George Island, and hence to supplement previous geomorphological studies of the South Shetland Islands. Photogrammetric flights were performed using a PW-ZOOM fixed-winged unmanned aircraft vehicle. Digital elevation models (DEM) and maps of slope and contour lines were prepared in ESRI ArcGIS 10.3 with the Spatial Analyst extension, and three-dimensional visualizations in ESRI ArcScene 10.3 software. Careful interpretation of orthophoto and DEM, allowed us to vectorize polygons of landforms, such as (i) solifluction landforms (solifluction sheets, tongues, and lobes); (ii) scarps, taluses, and a protalus rampart; (iii) patterned ground (hummocks, sorted circles, stripes, nets and labyrinths, and nonsorted nets and stripes); (iv) coastal landforms (cliffs and beaches); (v) landslides and mud flows; and (vi) stone fields and bedrock outcrops. We conclude that geomorphological studies based on commonly accessible aerial and satellite images can underestimate the spatial extent of periglacial landforms and result in incomplete inventories. The PW-ZOOM UAV is well suited to gather detailed geomorphological data and can be used in spatial analysis of periglacial landforms in the Western Antarctic Peninsula region.

Izu-Bonin arc and Philippine sea. Izuter dot Ogasawara ko to Philippine kai

Energy Technology Data Exchange (ETDEWEB)

Fujioka, K. (Japan Marine Science and Technology Center, Tokyo (Japan)); Nishimura, A. (Geological Survey of Japan, Tsukuba (Japan)); Koyama, M. (Shizuoka Univ., Shizuoka (Japan). Faculty of Education)

1991-08-25

The geoscience on the ocean floor has been remarkably developed for last 20 years, and the study of the Philippine sea floor also has extensively advanced especially by the deep sea drilling. In order to review the geoscientific studies on the Philippine sea and its surrounding regions under these circumstances, a simposium was held at the Ocean Research Institute, University of Tokyo on May 29/30 in 1990. The purposes of this symposium were to introduce the deep sea drilling results done in the Izu-Bonin arc during about 60 days from April to June in 1989, and to collect the geoscientific data and problems of surrounding regions which have an important significance to interprete the drilling results. In this report, the content of the collected papers was outlined with frontispieces dividing into 5 issues, namely issues regarding to the Izu-Bonin arc, issues regarding to the influenced regions by the subducting Philippine sea and the collision-accretion of the Izu-Bonin arc, the geophysical issues of regions surrounding the Japanese Islands, issues of the Philippine sea, and issues of the tectonic development history. 13 refs.

arcControlTower: the System for Atlas Production and Analysis on ARC

International Nuclear Information System (INIS)

Filipcic, Andrej

2011-01-01

PanDA, the Atlas management and distribution system for production and analysis jobs on EGEE and OSG clusters, is based on pilot jobs to increase the throughput and stability of the job execution on grid. The ARC middleware uses a specific approach which tightly connects the job requirements with cluster capabilities like resource usage, software availability and caching of input files. The pilot concept renders the ARC features useless. The arcControlTower is the job submission system which merges the pilot benefits and ARC advantages. It takes the pilot payload from the panda server and submits the jobs to the Nordugrid ARC clusters as regular jobs, with all the job resources known in advance. All the pilot communication with the PanDA server is done by the arcControlTower, so it plays the role of a pilot factory and the pilot itself. There are several advantages to this approach: no grid middleware is needed on the worker nodes, the fair-share between the production and user jobs is tuned with the arcControlTower load parameters, the jobs can be controlled by ARC client tools. The system could be extended to other submission systems using central distribution.

Oxidation State of Iron in the Izu-Bonin Arc Initial Magma and Its Influence Factors

Science.gov (United States)

Li, H.; Arculus, R. J.; Brandl, P. A.; Hamada, M.; Savov, I. P.; Zhu, S.; Hickey-Vargas, R.; Tepley, F. J., III; Meffre, S.; Yogodzinski, G. M.; McCarthy, A.; Barth, A. P.; Kanayama, K.; Kusano, Y.; Sun, W.

2014-12-01

The redox state of mantle-derived magmas is a controversial issue, especially whether island arc basalts are more oxidized than those from mid-ocean ridges. Usually, arc magmas have higher Fe3+/Fe2+ and calculated oxygen fugacity (fO2) than mid-ocean ridge basalts (MORB). It is the high fO2 of arc magma that apparently delays onset of sulfide fractionation and sequestration of precious/base metals thereby facilitating the formation of many giant gold-copper deposits typically associated with subduction zones. But due to a paucity of Fe3+/Fe2+ data for primary mantle-derived arc magmas, the cause for high fO2 of these magma types is still controversial; causes may include inter alia subduction-released oxidized material addition to the mantle wedge source of arc magma, partial melting of subducted slab, and redox changes occurring during ascent of the magma. Fortunately, IODP expedition 351 drilling at IODP Site U1438 in the Amami-Sankaku Basin of the northwestern Philipine Sea, adjacent to the proto-Izu-Bonin Arc at the Kyushu-Palau Ridge (KPR), recovered not only volcaniclastics derived from the inception of Izu-Bonin Mariana (IBM) arc in the Eocene, but also similar materials for the Arc's subsequent evolution through to the Late Oligocene and abandonment of the KPR as a remnant arc. Samples of the pre-Arc oceanic crustal basement were also recovered enabling us to determine the fO2of the mantle preceding arc inception. As the oxidation state of iron in basaltic glass directly relates to the fO2 , the Fe3+/∑Fe ratio [Fe3+/(Fe3++ Fe2+)] of basaltic glass are quantified by synchrotron-facilitated micro X-ray Absorption Near Edge Structure (XANES) spectroscopy to reflect its fO2. Fe K-edge µ-XANES spectra were recorded in fluorescence mode at Beamline 15U1, Shanghai Synchrotron Radiation Facility (SSRF). Synthetic silicate glass with known Fe3+/∑Fe ratio was used in data handling. The experimental results as well as preliminary data from IODP Expedition 351

High-Mg basalts as a Signal of Magma System Replenishment at Lopevi Island, Vanuatu

Science.gov (United States)

Stewart, R. B.; Smith, I. E.; Turner, M. B.; Cronin, S. J.

2007-05-01

Lopevi is is a basalt to basaltic andesite island stratovolcano in central Vanuatu and is part of a long-lived, mature Island Arc chain. Central Vanuatu is tectonically influenced by the subduction of the D'Entrecasteaux zone. Primitive rock types that have been identified from the arc include picrites, ankaramites and high MgO basalts. High MgO rocks are generally considered to be a relatively rare component of arc-type magma suites but as detailed sequence sampling of individual volcanoes occurs, they have been identified more often. Here we report on the occurrence of high-Mg basalts in a sequence of lavas erupted in the last 100 years from Lopevi volcano. Activity at Lopevi is characteristically intermittent with eruptive sequences occurring over a c. 6 year period, separated by longer periods of repose. A major eruptive episode in 1939 caused evacuation of the island and the next eruptive episode in the 1960's also led to evacuation. The 1960's cycle of activity ended in 1982. The most recent phase of activity commenced in 1998 with a return to eruption of more siliceous, high alumina basaltic andesite. Geochemical data show that the 1960's lavas were different from those erupted earlier and later. They are olivine basalts with up to 9 wt percent MgO, 70 ppm Ni and 300 ppm Cr; Al2O3 content is about 12 wt percent. The 2003 lavas and pre-1960's lavas, in contrast, are basaltic andesites with c. 4 wt percent MgO, less than 25 ppm Ni, less than 100 ppm Cr and c. 20 wt percent Al2O3. The 1960's Lopevi sequence of eruptions represents an injection of a more primitive, high MgO magma at the end of a 21 year quiescent period after the major eruptions of 1939. Injection of small batches of more primitive magmas over decadal time periods at Lopevi marks the initiation of a new magmatic cycle. The occurrence of high MgO magmas as part of a cycle that includes typically low MgO arc type rocks demonstrates a consanguineous relationship and shows that high MgO arc type

Physically based arc-circuit interaction

International Nuclear Information System (INIS)

Zhong-Lie, L.

1984-01-01

An integral arc model is extended to study the interaction of the gas blast arc with the test circuit in this paper. The deformation in the waveshapes of arc current and voltage around the current zero has been formulated to first approximation by using a simple model of arc voltage based on the arc core energy conservation. By supplementing with the time scale for the radiation, the time rates of arc processes were amended. Both the contributions of various arc processes and the influence of circuit parameters to the arc-circuit interaction have been estimated by this theory. Analysis generated a new method of calculating test circuit parameters which improves the accurate simulation of arc-circuit interaction. The new method agrees with the published experimental results

CRED 20m Gridded bathymetry of Nihoa Island, Hawaii, USA (Arc ASCII format)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Gridded bathymetry (20m) of the shelf and slope environments of Nihoa Island, Hawaii, USA. The ASCII includes multibeam bathymetry from the Simrad EM120, Simrad...

PC-based arc ignition and arc length control system for gas tungsten arc welding

International Nuclear Information System (INIS)

Liu, Y.; Cook, G.E.; Barnett, R.J.; Springfield, J.F.

1992-01-01

In this paper, a PC-based digital control system for gas tungsten arc welding (GTAW) is presented. This system controls the arc ignition process, the arc length, and the process of welding termination. A DT2818 made by Data Translation is used for interface and A/D and D/A conversions. The digital I/O ports of the DT2818 are used for control of wirefeed, shield gas, cooling water, welding power supply, etc. The DT2818 is housed in a PC. The welding signals and status are displayed on the screen for in-process monitoring. A user can control the welding process by the keyboard

Geology, petrography, Geochemistry, and geochronology of the old granite batholith between Quen and Safaga, eastern desert, Egypt. Vol. 3

International Nuclear Information System (INIS)

Attawiya, M.Y.; Nossair, L.M.; El-Debeiky, A.; Ragab, A.I.

1996-01-01

A suite of tonalite-granodiorite and monzogranite forms a huge old granite batholith between qena and Safaga, Eastern Desert, Egypt. The batholith was originated from the fractional crystallization of a peraluminous calk-alkaline magma rich in silica and of low potassium content. It is developed in an island arc tectonic setting. The rocks forming the batholith are depleted in both U and Th elements. However, a gradual increase in these two elements from tonalite to monzogranite was observed. Zircon and sphene are responsible for U and Th contents in these rocks. Rh/Sr isotope age determination reported an age of 632.8 ± 4.6 Ma for these old granitoids. The low initial 87 Sr/ 86 Sr ratio in these rocks suggested their mantle origin or derivation from lower crustal materials with low Rb/Sr ratios and short residence in the crust. 10 figs., 5 tabs

Geology, petrography, Geochemistry, and geochronology of the old granite batholith between Quen and Safaga, eastern desert, Egypt. Vol. 3.

Energy Technology Data Exchange (ETDEWEB)

Attawiya, M Y; Nossair, L M; El-Debeiky, A [Nuclear Materials Authority, Cairo, (Egypt); Ragab, A I [Ain Sahms Univ., Cairo, (Egypt)

1996-03-01

A suite of tonalite-granodiorite and monzogranite forms a huge old granite batholith between qena and Safaga, Eastern Desert, Egypt. The batholith was originated from the fractional crystallization of a peraluminous calk-alkaline magma rich in silica and of low potassium content. It is developed in an island arc tectonic setting. The rocks forming the batholith are depleted in both U and Th elements. However, a gradual increase in these two elements from tonalite to monzogranite was observed. Zircon and sphene are responsible for U and Th contents in these rocks. Rh/Sr isotope age determination reported an age of 632.8 {+-} 4.6 Ma for these old granitoids. The low initial{sup 87} Sr/{sup 86} Sr ratio in these rocks suggested their mantle origin or derivation from lower crustal materials with low Rb/Sr ratios and short residence in the crust. 10 figs., 5 tabs.

Paleomagnetic Constraints on the Tectonic History of the Mesozoic Ophiolite and Arc Terranes of Western Mexico

Science.gov (United States)

Boschman, L.; Van Hinsbergen, D. J. J.; Langereis, C. G.; Molina-Garza, R. S.; Kimbrough, D. L.

2017-12-01

The North American Cordillera has been shaped by a long history of accretion of arcs and other buoyant crustal fragments to the western margin of the North American Plate since the Early Mesozoic. Accretion of these terranes resulted from a complex tectonic history interpreted to include episodes of both intra-oceanic subduction within the Panthalassa/Pacific Ocean, as well as continental margin subduction along the western margin of North America. Western Mexico, at the southern end of the Cordillera, contains a Late Cretaceous-present day long-lived continental margin arc, as well as Mesozoic arc and SSZ ophiolite assemblages of which the origin is under debate. Interpretations of the origin of these subduction-related rock assemblages vary from far-travelled exotic intra-oceanic island arc character to autochthonous or parautochthonous extended continental margin origin. We present new paleomagnetic data from four localities: (1) the Norian SSZ Vizcaíno peninsula Ophiolite; (2) its Lower Jurassic sedimentary cover; and (3) Barremian and (4) Aptian sediments derived from the Guerrero arc. The data show that the Mexican ophiolite and arc terranes have a paleolatitudinal plate motion history that is equal to that of the North American continent. This suggests that these rock assemblages were part of the overriding plate and were perhaps only separated from the North American continent by temporal fore- or back-arc spreading. These spreading phases resulted in the temporal existence of tectonic plates between the North American and Farallon Plates, and upon closure of the basins, in the growth of the North American continent without addition of any far-travelled exotic terranes.

Sheath and arc-column voltages in high-pressure arc discharges

International Nuclear Information System (INIS)

Benilov, M S; Benilova, L G; Li Heping; Wu Guiqing

2012-01-01

Electrical characteristics of a 1 cm-long free-burning atmospheric-pressure argon arc are calculated by means of a model taking into account the existence of a near-cathode space-charge sheath and the discrepancy between the electron and heavy-particle temperatures in the arc column. The computed arc voltage exhibits a variation with the arc current I similar to the one revealed by the experiment and exceeds experimental values by no more than approximately 2 V in the current range 20-175 A. The sheath contributes about two-thirds or more of the arc voltage. The LTE model predicts a different variation of the arc voltage with I and underestimates the experimental values appreciably for low currents but by no more than approximately 2 V for I ≳ 120 A. However, the latter can hardly be considered as a proof of unimportance of the space-charge sheath at high currents: the LTE model overestimates both the resistance of the bulk of the arc column and the resistance of the part of the column that is adjacent to the cathode, and this overestimation to a certain extent compensates for the neglect of the voltage drop in the sheath. Furthermore, if the latter resistance were evaluated in the framework of the LTE model in an accurate way, then the overestimation would be still much stronger and the obtained voltage would significantly exceed those observed in the experiment.

Digitizing topography map of pulau panjang Banten, using ArcGIS 9.2 and surfer 8

International Nuclear Information System (INIS)

Ari Nugroho and Yarianto SBS

2010-01-01

In supporting the site safety and feasibility assessment of the Nuclear Power Plant (NPP), has been created the topographical map based on Geographic Information System (GIS). This map was created from the primary spatial data compilation resulting from the topographical survey of Pulo Panjang Island in February 2009. A personal computer installed with ArcGIS version 9.2 from Environmental System Research Institute (ESRI) and Surfer version 8 was used to support the activity. ArcGIS 9.2 was used to compile and process an extra-terrestrial spatial data from Global Positioning System (GPS) Real Time Kinematic (RTK) while surfer 8 was used to create a contour from orthometric elevation data. The result of this activity is a topographical map of Pulo Panjang in digital data which integrated, duplicable, informative, and editable. (author)

Geochronology of granitoids and gnaisses from the Rio Maria, Mata Geral farm and Itacaiunas river regions, southern Para, Brazil

International Nuclear Information System (INIS)

Montalvao, R.M.G. de; Tassinari, C.C.G.; Bezerra, P.E.L.; Prado, P.

1984-01-01

Granitoids and gneisses occurring at Rio Maria, Mata Geral farm and Itacaiunas river regions, southern Para, underwent radiometric age determinations by Rb/Sr method using conventional isochrons. Results obtained from the Rio Maria and Mata Geral farm regions allowed te establishment of a reference 2,600 my Rb/Sr isochron with an initial Sr 87 /Sr 86 ratio of 0.7009. This result resembles the one obtained for granitoids and gneisses hosting rocks of the Serra do Inaja greenstone belt, located some what south of this area, which yielded, in Rb/Sr isochron, a radiometric age of 2,696 + - 79 my with an initial Sr 87 /Sr 86 ratio of 0.701. Results obtained from the Itacaiunas river region allowed for the establishment of a Rb/Sr referential isochron of 2,480 + - 40 my wth an initial Sr 87 /.Sr 86 ratio of 0.7072. Due to low initial ratios, it is suggested that the rocks from the Rio Maria, Mata Geral farm and Serra do Inaja regions formed from Mafic crust or superior mantle reworking, while those from the Itacaiunas river region, due to a high initial ratio, result from reworking at high crustal levels. (Author) [pt

The geochemistry and geochronology of some proterozoic granitoid rocks from the Natal structural and metamorphic province, Southeastern Africa

International Nuclear Information System (INIS)

Kerr, A.; Milne, G.C.; Eglington, B.M.

1987-01-01

The Natal Structural and Metamorphic Province is thought to be an eastern extension of the Namaqua Metamorphic Province. Until recently few geochemical and isotopic data have been available on many of the rocks of this mobile belt. This paper presentes initial geochemical and geochronological information on the granitoids and associated rocks from three areas NSMP. Together, these areas provide a traverse through central and southern parts of the Mapumulo Group. Supracrustal gneisses, of uncertain age, are the oldest rocks in all areas, while the granitic intrusives range from 1,200-850 Ma, with a tendency for younger dates towards dates towards the south. Low initial 87 Sr/ 86 Sr ratios for these plutonic units suggest that the rocks were the products of partial melting of a relatively juvenile (circa 1,400 Ma) protolith. A type granites are common within the NSMP and give a range of ages, indicating that conditions suitable for their formation persited in this part of the African continent for an extended period of time. Economic deposits are lacking in eastern (Natal) sector of the mobile belt. Reconnaissance studies, however indicate that syn-tolate-Kinematic granitoids, intruded circa 1,000 Ma, are enriched in uranium and thorium irrespective of bulk chemistry, textural nature,mineralogy,structural setting, and isotopic characteristics. (author) [pt

Single-Arc IMRT?

International Nuclear Information System (INIS)

Bortfeld, Thomas; Webb, Steve

2009-01-01

The idea of delivering intensity-modulated radiation therapy (IMRT) with a multileaf collimator in a continuous dynamic mode during a single rotation of the gantry has recently gained momentum both in research and industry. In this note we investigate the potential of this Single-Arc IMRT technique at a conceptual level. We consider the original theoretical example case from Brahme et al that got the field of IMRT started. Using analytical methods, we derive deliverable intensity 'landscapes' for Single-Arc as well as standard IMRT and Tomotherapy. We find that Tomotherapy provides the greatest flexibility in shaping intensity landscapes and that it allows one to deliver IMRT in a way that comes close to the ideal case in the transverse plane. Single-Arc and standard IMRT make compromises in different areas. Only in relatively simple cases that do not require substantial intensity modulation will Single-Arc be dosimetrically comparable to Tomotherapy. Compared with standard IMRT, Single-Arc could be dosimetrically superior in certain cases if one is willing to accept the spreading of low dose values over large volumes of normal tissue. In terms of treatment planning, Single-Arc poses a more challenging optimization problem than Tomotherapy or standard IMRT. We conclude that Single-Arc holds potential as an efficient IMRT technique especially for relatively simple cases. In very complex cases, Single-Arc may unduly compromise the quality of the dose distribution, if one tries to keep the treatment time below 2 min or so. As with all IMRT techniques, it is important to explore the tradeoff between plan quality and the efficiency of its delivery carefully for each individual case. (note)

The possibility of use of Kremicj granitoid (Serbia) as an architectural stone

International Nuclear Information System (INIS)

Kureshevicj, Lidja

2010-01-01

The stone from the granitoid pluton of Kremić in southern Serbia has been examined in order to evaluate the possibility of its use as an architectural stone. Both field observations and laboratory testing of specimens have been performed. Although the specimens were collected from the field surface level, their physicomechanical lab test results have shown that the rock mass itself fulfils all the requirements for use as an architectural stone set by the State through Serbian standards. Also, the stone quality is higher in deeper ground levels, where the weathering agents have less intense effects. This stone does not have high ornamental properties, but it has a finegrained texture and low mica content which has a positive effect on its technical characteristics and susceptibility to processing. (Author)

Amphibole Fractional Crystallization and Delamination in Arc Roots: Implications for the `Missing' Nb Reservoir in the Earth

Science.gov (United States)

Galster, F.; Chatterjee, R. N.; Stockli, D. F.

2017-12-01

Most geologic processes should not fractionate Nb from Ta but Earth's major silicate reservoirs have subchondritic Nb/Ta values. Nb/Ta of >10000 basalts and basaltic andesites from different tectonic settings (GEOROC) cluster around 16, indistinguishable from upper mantle values. In contrast, Nb/Ta in more evolved arc volcanics have progressively lower values, reaching continental crust estimates, and correlate negatively with SiO2 (see figure) and positively with TiO2 and MgO. This global trend suggests that differentiation processes in magmatic arcs could explain bulk crustal Nb/Ta estimates. Understanding processes that govern fractionation of Nb from Ta in arcs can provide key insights on continental crust formation and help identify Earth's `missing' Nb reservoir. Ti-rich phases (rutile, titanite and ilmenite) have DNb/DTa values in the evolved liquid. Lack of correlation between Nb/Ta and K2O in global volcanic rocks implies that biotite plays a minor role in fractionating Nb from Ta during differentiation. Experimental petrology and evidence from exposed arc sections indicate that amphibole fractionation and delamination of island arc roots can explain the andesitic composition of bulk continental crust. Experimental studies have shown that amphibole Mg# correlate with DNb/DTa and amphibole could effectively fractionate Nb from Ta. Preliminary data from lower to middle crustal amphiboles from preserved arcs show sub- to super-chondritic Nb/Ta up to >60. This suggests that delamination of amphibole-rich cumulates can be a viable mechanism for the preferential removal of Nb from the continental crust. Future examination of Nb/Ta ratios in lower crustal amphiboles from various preserved arcs will provide improved constraints on the Nb-Ta paradox of the silicate Earth.

Evaluation of volumetric modulated arc therapy for cranial radiosurgery using multiple noncoplanar arcs

International Nuclear Information System (INIS)

Audet, Chantal; Poffenbarger, Brett A.; Chang, Pauling; Jackson, Paul S.; Lundahl, Robert E.; Ryu, Stephen I.; Ray, Gordon R.

2011-01-01

Purpose: To evaluate a commercial volumetric modulated arc therapy (VMAT), using multiple noncoplanar arcs, for linac-based cranial radiosurgery, as well as evaluate the combined accuracy of the VMAT dose calculations and delivery. Methods: Twelve patients with cranial lesions of variable size (0.1-29 cc) and two multiple metastases patients were planned (Eclipse RapidArc AAA algorithm, v8.6.15) using VMAT (1-6 noncoplanar arcs), dynamic conformal arc (DCA, ∼4 arcs), and IMRT (nine static fields). All plans were evaluated according to a conformity index (CI), healthy brain tissue doses and volumes, and the dose to organs at risk. A 2D dose distribution was measured (Varian Novalis Tx, HD120 MLC, 1000 MU/min, 6 MV beam) for the ∼4 arc VMAT treatment plans using calibrated film dosimetry. Results: The CI (0-1 best) average for all plans was best for ∼4 noncoplanar arc VMAT at 0.86 compared with ∼0.78 for IMRT and a single arc VMAT and 0.68 for DCA. The volumes of healthy brain receiving 50% of the prescribed target coverage dose or more (V 50% ) were lowest for the four arc VMAT [RA(4)] and DCA plans. The average ratio of the V 50% for the other plans to the RA(4) V 50% were 1.9 for a single noncoplanar arc VMAT [RA(1nc)], 1.4 for single full coplanar arc VMAT [RA(1f)] and 1.3 for IMRT. The V 50% improved significantly for single isocenter multiple metastases plan when two noncoplanar VMAT arcs were added to a full single coplanar one. The maximum dose to 5 cc of the outer 1 cm rim of healthy brain which one may want to keep below nonconsequential doses of 300-400 cGy, was 2-3 times greater for IMRT, RA(1nc) and RA(1f) plans compared with the multiple noncoplanar arc DCA and RA(4) techniques. Organs at risk near (0-4 mm) to targets were best spared by (i) single noncoplanar arcs when the targets are lateral to the organ at risk and (ii) by skewed nonvertical planes of IMRT fields when the targets are not lateral to the organ at risk. The highest dose gradient

Hybrid laser-arc welding

DEFF Research Database (Denmark)

Hybrid laser-arc welding (HLAW) is a combination of laser welding with arc welding that overcomes many of the shortfalls of both processes. This important book gives a comprehensive account of hybrid laser-arc welding technology and applications. The first part of the book reviews...... the characteristics of the process, including the properties of joints produced by hybrid laser-arc welding and ways of assessing weld quality. Part II discusses applications of the process to such metals as magnesium alloys, aluminium and steel as well as the use of hybrid laser-arc welding in such sectors as ship...... building and the automotive industry. With its distinguished editor and international team of contributors, Hybrid laser-arc welding, will be a valuable source of reference for all those using this important welding technology. Professor Flemming Ove Olsen works in the Department of Manufacturing...

The 2004 Sumatra Earthquake Mw 9.3: Seismological and Geophysical Investigations in the Andaman-Nicobar Islands

Science.gov (United States)

Mooney, W. D.; Kayal, J.

2007-05-01

The December 26, 2004 Sumatra-Andaman earthquake (MW 9.3) is the fourth largest event (M>9.0) in the world during the last 100 years. It occurred by thrust faulting on the interplate thrust zone of the subducting India plate and overriding Burma platelet. The main shock rupture, ~1300 km long and ~200 km wide, propagated from north of Sumatra to Andaman - Nicobar Islands; the slow rupture generated Tsunami which killed about 300,000 people. The epicenter of the earthquake is located at 3.90N and 94.260E with a focal depth at 28 km (USGS). This mega seismic event triggered giant tsunamis that devastated the coastal regions of Indonesia, Malaysia, Thailand, Sri Lanka, India, Maldives and even the east coast of Africa. The impact of the tsunami was quite severe in India, in the coasts of Andaman and Nicobar Islands. The Air-base in the Car- Nicobar island was totally devastated by the tsunami and killed about 200 people. Macroseismic survey was carried out by different teams of GSI in North Andaman, Middle Andaman, South Andaman, Havelock Hut Bay and also in the Nicobar Islands. A maximum intensity VIII was recorded in the Andaman Islands. The mega thrust event was followed by an intense aftershock activity spreading over an area extending between 30-140N along the Andaman - Nicobar - Sumatra Island arc region. The aftershocks are distributed northwards from the epicenter of the main shock suggesting a unilateral rupture propagation. The aftershock (M >4.5) area covers a length of about 1300 km and a width of about 200 km, in a 'banana' shape. The national network (IMD) recorded almost all aftershocks M >5.0; about 350 were recorded till 31.01.2005. The Geological Survey of India (GSI) deployed six temporary seismograph stations in the Andaman and Nicobar Islands and also in Havelok and Narkunda (volcanic) islands. About 20,000 aftershocks (M >3.0) were recorded until end of March, 2005. About 1000 aftershocks (M >3.0) located by the GSI network until January 31, 2005

Chemical weathering on the North Island of New Zealand: CO2 consumption and fluxes of Sr and Os

Science.gov (United States)

Blazina, Tim; Sharma, Mukul

2013-09-01

We present Os and Sr isotope ratios and Os, Sr and major/trace element concentrations for river waters, spring waters and rains on the North Island of New Zealand. The Os and Sr data are used to examine whether the NINZ is a significant contributor of unradiogenic Os and Sr to the oceans. Major element chemistry is used to quantify weathering and CO2 consumption rates on the island to investigate relationships between these processes and Os and Sr behavior. Chemical erosion rates and CO2 consumption rates across the island range from 44 to 555 km-2 yr-1 and 95 to 1900 × 103 mol CO2 km-2 yr-1, respectively. Strontium flux for the island range from 177 to 16,100 mol km-2 yr-1 and the rivers have an average flux normalized 87Sr/86Sr ratio of 0.7075. In agreement with the previous studies these findings provide further evidence that weathering of arc terrains contributes a disproportionally large amount of Sr to the oceans and consumes very large amounts of CO2 annually compared to their areal extent. However, the 87Sr/86Sr from the NINZ is not particularly unradiogenic and it is likely not contributing significant amounts of unradiogenic Sr to the oceans. Repeated Os analyses and bottle leaching experiments revealed extensive and variable sample contamination by Os leaching from rigorously precleaned LDPE bottles. An upper bound on the flux of Os from NINZ can nevertheless be assessed and indicates that island arcs cannot provide significant amounts of unradiogenic Os to the oceans.

Electric Arc Furnace Modeling with Artificial Neural Networks and Arc Length with Variable Voltage Gradient

Directory of Open Access Journals (Sweden)

Raul Garcia-Segura

2017-09-01

Full Text Available Electric arc furnaces (EAFs contribute to almost one third of the global steel production. Arc furnaces use a large amount of electrical energy to process scrap or reduced iron and are relevant to study because small improvements in their efficiency account for significant energy savings. Optimal controllers need to be designed and proposed to enhance both process performance and energy consumption. Due to the random and chaotic nature of the electric arcs, neural networks and other soft computing techniques have been used for modeling EAFs. This study proposes a methodology for modeling EAFs that considers the time varying arc length as a relevant input parameter to the arc furnace model. Based on actual voltages and current measurements taken from an arc furnace, it was possible to estimate an arc length suitable for modeling the arc furnace using neural networks. The obtained results show that the model reproduces not only the stable arc conditions but also the unstable arc conditions, which are difficult to identify in a real heat process. The presented model can be applied for the development and testing of control systems to improve furnace energy efficiency and productivity.

U-series isotopes in arc magma

Energy Technology Data Exchange (ETDEWEB)

Hawkesworth, C.; Turner, S.; McDermott, F.; Peate, D.; Van Calsteren, P.

1997-12-31

Thorium is not readily mobilized in the fluid component along destructive plate margins. Uranium is mobilized, and the resultant fractionation in U/Th can be used to estimate the rates of transfer slab derived components through the mantle wedge. The variations in Th/Yb, and by implication in the fractionation-corrected Th abundances of arc magmas largely depend on the contributions from subducted sediments. It is inferred that the distinctive high Th/Ta ratios of subduction related magmas primarily reflect the Th/Ta ratios of the subducted sediments, and that such high Th/Ta ratios are generated by processes other than those associated with recent subduction-related magmatism. Uranium and thorium isotopes have also been used to evaluate magma residence times within the crust. Thus, separated minerals and groundmass from six rocks erupted in the last 4,000 years from Soufriere on St. Vincent in the Lesser Antilles, scatter about a 50,000 year errorchron on the U-Th equiline diagram (Heath et al., 1977). Models are currently being developed to investigate how such apparent ages may relate to calculated replenishment times in steady state systems. Bulk continental crust has a lower U/Th ratio (0.25) than at least some estimates for the bulk Earth (0.26) and the depleted upper mantle (0.39). However, the island arc rocks with low U/Th ratios appear to have inherited those from subducted sediments, and arc rocks with a low sediment contribution have significantly higher U/Th. Consequently, the U/Th ratios of new crustal material generated along destructive plate margins are significantly higher than those of bulk continental crust. The low average U/Th of bulk crust may be primarily due to different crust generation processes in the Archaean, when U would be less mobile because conditions were less oxidising, and when residual garnet may have had more of a role in crust generation processes. Extended abstract. 4 figs., 23 refs.

Hydrothermal manganese oxide deposits from the Izu-Ogasawara (Bonin)-Mariana Arc and adjacent areas

Energy Technology Data Exchange (ETDEWEB)

Usui, A.; Nishimura, A. (Geological Survey of Japan, Tsukuba (Japan))

1992-04-27

Modern and fossil hydrothermal manganese oxide deposits were discovered from a number of locations in the Izu-Ogasawara(Bonin)-Mariana Arc and adjacent areas during the Hakurei-Maru cruises from 1984 to 1989. This paper describes the occurrence and characteristics of these manganese deposits and their geological significance. It was found that the mineralogical and chemical composition and microstructure of the deposits are typically different from manganese nodules and crusts of hydrogenetic or diagenetic origin. Hardpans, veinlets, sheets, and irregular mass of the hydrothermal manganese deposits often cover a large area of sea bed, which suggests possible high-temperature hydrothermal sulfide deposits in their vicinity. On the other hand, the manganese minerals sometimes occur as substrate of younger hydrogenetic crusts and as nucleus of hydrogenetic nodules, which can provide a geological history of low-temperature hydrothermal activity on the past island arcs. 45 refs., 19 figs., 3 tabs.

Method to reduce arc blow during DC arc welding of pipelines

Energy Technology Data Exchange (ETDEWEB)

Espina-Hernandez, J. H.; Rueda-Morales, G.L.; Caleyo, F.; Hallen, J. M. [Instituto Politecnico Nacional, Mexico, (Mexico); Lopez-Montenegro, A.; Perz-Baruch, E. [Pemex Exploracion y Produccion, Tabasco, (Mexico)

2010-07-01

Steel pipelines are huge ferromagnetic structures and can be easily subjected to arc blow during the DC arc welding process. The development of methods to avoid arc blow during pipeline DC arc welding is a major objective in the pipeline industry. This study developed a simple procedure to compensate the residual magnetic field in the groove during DC arc welding. A Gaussmeter was used to perform magnetic flux density measurements in pipelines in southern Mexico. These data were used to perform magnetic finite element simulations using FEMM. Different variables were studied such as the residual magnetic field in the groove or the position of the coil with respect to the groove. An empirical predictive equation was developed from these trials to compensate for the residual magnetic field. A new method of compensating for the residual magnetic field in the groove by selecting the number of coil turns and the position of the coil with respect to the groove was established.

Using arc voltage to locate the anode attachment in plasma arc cutting

International Nuclear Information System (INIS)

Osterhouse, D J; Heberlein, J V R; Lindsay, J W

2013-01-01

Plasma arc cutting is a widely used industrial process in which an electric arc in the form of a high velocity plasma jet is used to melt and blow away metal. The arc attaches inside the resulting cut slot, or kerf, where it both provides a large heat flux and determines the flow dynamics of the plasma. Knowledge of the position of the arc attachment is essential for understanding the phenomena present at the work piece. This work presents a new method of measuring the location of the arc attachment in which the arc voltage is measured during the cutting of a range of work piece thicknesses. The attachment location is then interpreted from the voltages. To support the validity of this method, the kerf shape, dross particle size and dross adhesion to the work piece are also observed. While these do not conclusively give an attachment location, they show patterns which are consistent with the attachment location found from the voltage measurements. The method is demonstrated on the cutting of mild steel, where the arc attachment is found to be stationary in the upper portion of the cut slot and in reasonable agreement with existing published findings. For a process optimized for the cutting of 12.7 mm mild steel, the attachment is found at a depth of 1.5–3.4 mm. For a slower process optimized for the cutting of 25.4 mm mild steel, the attachment is found at a depth of 3.4–4.8 mm, which enhances heat transfer further down in the kerf, allowing cutting of the thicker work piece. The use of arc voltage to locate the position of the arc attachment is unique when compared with existing methods because it is entirely independent of the heat distribution and visualization techniques. (paper)

Source of marine turbidites on the Andaman-Nicobar Islands: Nicobar Fan, Bengal Fan or paleo-Irrawaddy?

Science.gov (United States)

Carter, A.

2017-12-01

Marine turbidites from an axially fed submarine fan are intermittently exposed across the entire chain of the Andaman-Nicobar Islands. Known as the Andaman Flysch (AF) and loosely assigned to the Paleogene, it has been proposed that these rocks are sourced from the Himalaya and thus provide a unique window into early stages of orogenesis. Where the turbidites came from has been subject to debate; they are either Bengal Fan or forearc deposits cut off from the Bengal Fan and possibly sourced from the Irrawaddy delta. Following recent IODP drilling in the eastern Indian Ocean (Expeditions 354 and 362) it is now possible resolve this by comparing the provenance of AF turbidites with the Bengal and Nicobar Fans. The Andaman Flysch can be traced as detached outcrops all along the western side of the main islands of Andaman over a strike length of more than 200 km. Exposures along the east coast are confined to South Andaman Island. Petrographic and geochemical data show a common continental crust signal with minor contributions from arc material. But, there are also differences whereby west coast sandstones show significantly higher quartz content and less feldspars and rock fragments. Staurolite is also present in all samples from the western side, but is absent from east coast samples. Both detrital zircon U-Pb and Bulk rock Nd data record the presence of arc material likely from Myanmar. Detrital zircon data from the Nicobar Fan match the Andaman turbidites and indicate sources from the Greater and Tethyan Himalaya mixed with sediment from the Burmese arc. Transfer of Irrawaddy derived sediment to the Nicobar Fan is ruled out as sediment transfer across the fore-arc to the west was restricted by the then exposed Yadana and M8 highs in the north and the Sewell and Alcock Rises to the south. Sediment isopachs of the Martaban back arc basin, the main north-south-oriented depocentre in the Andaman Sea related to the development of the Thanlwin -Irrawaddy delta system

Relict Forms of a Disappeared Mountain. The Periglacial Deposits in Asinara Island-Sardinia, Italy

Directory of Open Access Journals (Sweden)

Sergio GINESU

2014-10-01

Full Text Available Asinara Island is located in northwestern Sardinia (Italy and only recently has been divested as a maximum-security prison and returned to nature protection as a National Park with Marine Protected Area along the coastal perimeter. Geologically, the island is formed by a Paleozoic basement in transition between the metamorphic rocks and the Pre-Hercynian granitic batholith of Sardinia. New surveys carried out to reconstruct the recent evolution of the landscape have shown a lot of deposits formed by large blocks of granitoid and anphibolitic rocks representing a favorable situation to produce this material formation in terms of differential erosion in periglaciar environment. Similar morphologies are possible to observe in many places in Sardinia continental hard rocks as effect of the conditions of refreezing periods ("glacial". These deposits are commonly known as " block streams " or " block fields " and reported for the first time in Italy in 1990 in the central area of the island of Sardinia, about 500 meters above sea level. Their presence in Sardinia is always documented in a range of altitudes not less than 350-400 meters and, in this case for the first time they have been identified in close proximity to the coastline. In addition, some of these deposits cover the thalwegs present on the granite rocks in the central portion of the island. The most interesting cases are represented by the deposits located on the northwestern side, near the lighthouse of Punta Scorno. The widespread presence of these deposits suggests significant areal erosion of the island terrain; they probably accumulated during the colder episodes that have characterized the Middle and Upper Pleistocene of the entire western Mediterranean. These testify the existence of an energy relief higher than the present one and a coastline located about 25 kilometers from the current position, however, documented by the block stream of Cala Arena, the first deposit located for

Diffuse and spot mode of cathode arc attachments in an atmospheric magnetically rotating argon arc

International Nuclear Information System (INIS)

Chen, Tang; Wang, Cheng; Liao, Meng-Ran; Xia, Wei-Dong

2016-01-01

A model including the cathode, near-cathode region, and arc column was constructed. Specifically, a thermal perturbation layer at the arc fringe was calculated in order to couple sheath/presheath modelling with typical arc column modelling. Comparative investigation of two modes of attachment of a dc (100, 150, 200 A) atmospheric-pressure arc in argon to a thermionic cathode made of pure tungsten was conducted. Computational data revealed that there exists two modes of arc discharge: the spot mode, which has an obvious cathode surface temperature peak in the arc attachment centre; and the diffuse mode, which has a flat cathode surface temperature distribution and a larger arc attachment area. The modelling results of the arc attachment agree with previous experimental observations for the diffuse mode. A further 3D simulation is obviously needed to investigate the non-axisymmetrical features, especially for the spot mode. (paper)

Interactions between laser and arc plasma during laser-arc hybrid welding of magnesium alloy

Science.gov (United States)

Liu, Liming; Chen, Minghua

2011-09-01

This paper presents the results of the investigation on the interactions between laser and arc plasma during laser-arc hybrid welding on magnesium alloy AZ31B using the spectral diagnose technique. By comparably analyzing the variation in plasma information (the shape, the electron temperature and density) of single tungsten inert gas (TIG) welding with the laser-arc hybrid welding, it is found that the laser affects the arc plasma through the keyhole forming on the workpiece. Depending on the welding parameters there are three kinds of interactions taking place between laser and arc plasma.

First report of (U-Th)/He thermochronometric data across Northeast Japan Arc: implications for the long-term inelastic deformation

Science.gov (United States)

Sueoka, Shigeru; Tagami, Takahiro; Kohn, Barry P.

2017-06-01

(U-Th)/He thermochronometric analyses were performed across the southern part of the Northeast Japan Arc for reconstructing the long-term uplift and denudation history in the region. Apatite (U-Th-Sm)/He ages ranged from 64.3 to 1.5 Ma, while zircon (U-Th)/He ages ranged between 39.6 and 11.0 Ma. Apatite (U-Th-Sm)/He ages showed obvious contrast among the morphostructural provinces; older ages of 64.3-49.6 Ma were obtained in the Abukuma Mountains on the fore-arc side, whereas younger ages of 11.4-1.5 Ma were determined in the Ou Backbone Range (OBR) along the volcanic front and the Asahi Mountains on the back-arc side. The age contrasts are basically interpreted to reflect the differences in the uplift and the denudation histories of the provinces considering the thermal effects of magmatism and timing of the known uplift episodes. Denudation rates were calculated to be histories at the scale of an island arc, as well as continental orogens. However, careful discussion of magmatic thermal effects is required.[Figure not available: see fulltext.

Evolution of Brasiliano-age granitoid types in a shear-zone environment, Umarizal-Caraubas region, Rio Grande do Norte, northeast Brazil

Science.gov (United States)

Galindo, A. C.; Dall'Agnol, R.; McReath, I.; Lafon, J. M.; Teixeira, N.

1995-01-01

A sequence of Brasiliano-age granitoid types is exposed in a small area near the cities of Umarizal and Caraúbas in Rio Grande do Norte State, Northeast Brazil. Porphyritic K-alkali-calcic monzogranite is an important facies of the oldest Caraúbas intrusion (RbSr whole rock isochron age of ca. 630 Ma), which suffered solid-state deformation due to movements on a major NE-trending shear zone. The intrusion of the Prado and part of the Quixaba bodies was probably controlled by the shear zone. These two bodies include mafic/intermediate rocks, some of which contain two pyroxenes, and have hybrid, partly alkaline and partly shoshonitic geochemical characteristics. Rock types and ages are similar to those of some Pan-African occurrences in southwestern Nigeria. The Tourão body, intruded at ca. 590 Ma, presents preferred mineral orientations which are probably largely magmatic, since little evidence is found for widespread solid-state deformation. On the other hand, its intrusion may have been facilitated by the presence of the shear-zone faults. The rocks form a monomodal felsic K-alkali-calcic suite. With the exception of the Quixaba body, all these earlier granitoids are magmatic epidote- and magnetite-bearing porphyritic monzogranites with trace element geochemical characteristics of modern syn-collisional granites. The latest intrusion at ca. 545 Ma is mainly represented by potassic quartz syenites and related rocks, some of which contain fayalite or ferrohypersthene. These rocks possess neither well developed mineral orientations of magmatic origin nor signs of solid-state deformation. They are mineralogically similar to, but younger than some of the "bauchites" of central Nigeria. Geochemical signatures are comparable with those of modern within-plate granites. All granitoids present high ( 87Sr/ 86Sr)i ratios which range from 0.708 to 0.712, and increase with decreasing age. Such ratios are compatible with important or dominant crustal contributions. On the

Arc-to-arc mini-sling 1999: a critical analysis of concept and technology

Directory of Open Access Journals (Sweden)

Paulo Palma

2011-04-01

Full Text Available PURPOSE: The aim of this study was to critically review the Arc-to-Arc mini-sling (Palma's technique a less invasive mid-urethral sling using bovine pericardium as the sling material. MATERIALS AND METHODS: The Arc-to-Arc mini-sling, using bovine pericardium, was the first published report of a mini-sling, in 1999. The technique was identical to the "tension-free tape" operation, midline incision and dissection of the urethra. The ATFP (white line was identified by blunt dissection, and the mini-sling was sutured to the tendinous arc on both sides with 2 polypropylene 00 sutures. RESULTS: The initial results were encouraging, with 9/10 patients cured at the 6 weeks post-operative visit. However, infection and extrusion of the mini-sling resulted in sling extrusion and removal, with 5 patients remaining cured at 12 months. CONCLUSION: The Arc-to-Arc mini-sling was a good concept, but failed because of the poor technology available at that time. Further research using new materials and better technology has led to new and safer alternatives for the management of stress urinary incontinence.

Effect of arc behaviour on the temperature fluctuation of carbon electrode in DC arc discharge

International Nuclear Information System (INIS)

Liang, F; Tanaka, M; Choi, S; Watanabe, T

2014-01-01

Diffuse and multiple arc-anode attachment modes were observed in a DC arc discharge with a carbon electrode. During the arc discharge, the surface temperature of the electrode was successfully measured by two-colour pyrometry combined with a high-speed camera which employs appropriate band-pass filters. The relationship between the arc-anode attachment mode and the temperature fluctuation of electrode surface was investigated. The diffuse arc-anode attachment mode leads to relatively large temperature fluctuation on anode surface due to the rotation of the arc spot. In the case of diffuse mode, the purity of synthesized multi-wall carbon nanotube was deteriorated with temperature fluctuation

The differentiation process of the I-type granitoids in southwest Japan and New South Wares in Australia

Science.gov (United States)

Kawakatsu, K.; Iwamoto, Y.; Ebisu, S.; Hasegawa, M.; Hiraiwa, N.; Kawakatsu, T.; Kitano, A.; Masuta, T.; Ootsubo, H.; Wakazono, R.

2013-12-01

Cretaceous-Paleogene Granitoids in the inner zone of southwest Japan have been divided into two series: the magnetite series that is distributed mainly in the San-in belt and the ilmenite series that is distributed mainly in San-yo belt. For 8 years, we have been investigating the two series to clear their processes of magmatic differentiation. Recently, we discovered oscillatory zoned structure, exsolution lamellae of amphibole, and relics of pyroxene left in the core of amphibole from Harima granodiorite, Nunobiki granodiorite (San-yo belt) and Daito-Yokota quartz diorite (San-in belt). The amphibole that has microstructure coexists with magnetite, ilmenite and pyrrhotite. We compared the two series for crystallization and re-equilibrium by ion substitution using the microstructure of the amphibole as 'time measure' during the differentitation process of acidic magma. While magnetites and ilmenites coexist with the core of the amphiboles, the oxygen fugacity of the San-yo belt magma was low until the later stage of magmatic differentiation where H2S from the Earth's crust mixed with it. In the subsolidus process, hydrothermal solutions circulated. On the other hand, the oxygen fugacity of the San-in belt magma began to rise in the early stage of magmatic differentiation. In the later stage, mafic magma was contaminated with SO2. The rims of amphiboles coexist with pyrrhotites in both of belts. Furthermore, the re-equilibrium of minerals underwent progressive oxidation and hydrothermal fluid circulated actively in the subsolidus process. Bingie Bingie Point at New South Wares (Eurobodalla National Park) is a peninsula about a meter around. The plutonic rocks were formed in the Devonian period and belong to the magnetite series. They are classified I-type granitoids such as those found in the inner zone of southwest Japan. They have only trace amounts of oxide minerals and pyrrhotite. The amphiboles of the granitoids have oscillatory zoned structures at pale green

Geocronología y geoquímica isotópica (Sr, Nd) de los granitoides de Pola de Allande (Asturias): ¿Relictos de un arco magmático cadomiense en la Zona Asturoccidental Leonesa?

OpenAIRE

Gutiérrez Alonso, Gabriel; Fernández Suárez, Javier

1998-01-01

[ES] Los granitoides pre-Variscos de Pola de Allande se sitúan en el Antiforme del Narcea, en el límite entre las zonas Cantábrica y Asturoccidental Leonesa de la cadena Varisca Ibérica. Estos granitoides, formados por tonalitas y granodioritas con afinidades geoquímicas de arco magmático, intruyeron en sedimentos siliciclásticos Neoproterozoicos y fueron posteriormente afectados por la deformación tangencial Varisca. La datación U-Pb de circones de dos intrusiones por el método de Ablación L...

Permian arc evolution associated with Panthalassa subduction along the eastern margin of the South China block, based on sandstone provenance and U-Pb detrital zircon ages of the Kurosegawa belt, Southwest Japan

Science.gov (United States)

Hara, Hidetoshi; Hirano, Miho; Kurihara, Toshiyuki; Takahashi, Toshiro; Ueda, Hayato

2018-01-01

We have studied the petrography, geochemistry, and detrital zircon U-Pb ages of sandstones from shallow-marine forearc sediments, accretionary complexes (ACs), and metamorphosed accretionary complexes (Meta-ACs) within the Kurosegawa belt of Southwest Japan. Those rocks formed in a forearc region of a Permian island arc associated with subduction of the Panthalassa oceanic crust along the eastern margin of the South China block (Yangtze block). The provenance of the shallow-marine sediments was dominated by basaltic to andesitic volcanic rocks and minor granitic rocks during the late Middle to Late Permian. The ACs were derived from felsic to andesitic volcanic rocks during the Late Permian. The provenance of Meta-ACs was dominated by andesitic volcanic rocks in the Middle Permian. The provenance, source rock compositions, and zircon age distribution for the forearc sediments, ACs and Meta-ACs have allowed us to reconstruct the geological history of the Permian arc system of the Kurosegawa belt. During the Middle Permian, the ACs were accreted along the eastern margin of the South China block. The Middle Permian arc was an immature oceanic island arc consisting of andesitic volcanic rocks. During the Late Permian, the ACs formed in a mature arc, producing voluminous felsic to andesitic volcanic rocks. A forearc basin developed during the late Middle to Late Permian. Subsequently, the Middle Permian ACs and part of the Late Permian AC underwent low-grade metamorphism in the Late to Early Jurassic, presenting the Meta-ACs.

Circum-Pacific accretion of oceanic terranes to continental blocks: accretion of the Early Permian Dun Mountain ophiolite to the E Gondwana continental margin, South Island, New Zealand

Science.gov (United States)

Robertson, Alastair

2016-04-01

Accretionary orogens, in part, grow as a result of the accretion of oceanic terranes to pre-existing continental blocks, as in the circum-Pacific and central Asian regions. However, the accretionary processes involved remain poorly understood. Here, we consider settings in which oceanic crust formed in a supra-subduction zone setting and later accreted to continental terranes (some, themselves of accretionary origin). Good examples include some Late Cretaceous ophiolites in SE Turkey, the Jurassic Coast Range ophiolite, W USA and the Early Permian Dun Mountain ophiolite of South Island, New Zealand. In the last two cases, the ophiolites are depositionally overlain by coarse clastic sedimentary rocks (e.g. Permian Upukerora Formation of South Island, NZ) that then pass upwards into very thick continental margin fore-arc basin sequences (Great Valley sequence, California; Matai sequence, South Island, NZ). Field observations, together with petrographical and geochemical studies in South Island, NZ, summarised here, provide evidence of terrane accretion processes. In a proposed tectonic model, the Early Permian Dun Mountain ophiolite was created by supra-subduction zone spreading above a W-dipping subduction zone (comparable to the present-day Izu-Bonin arc and fore arc, W Pacific). The SSZ oceanic crust in the New Zealand example is inferred to have included an intra-oceanic magmatic arc, which is no longer exposed (other than within a melange unit in Southland), but which is documented by petrographic and geochemical evidence. An additional subduction zone is likely to have dipped westwards beneath the E Gondwana margin during the Permian. As a result, relatively buoyant Early Permian supra-subduction zone oceanic crust was able to dock with the E Gondwana continental margin, terminating intra-oceanic subduction (although the exact timing is debatable). The amalgamation ('soft collision') was accompanied by crustal extension of the newly accreted oceanic slab, and

Unzipping of the volcano arc, Japan

Science.gov (United States)

Stern, R.J.; Smoot, N.C.; Rubin, M.

1984-01-01

A working hypothesis for the recent evolution of the southern Volcano Arc, Japan, is presented which calls upon a northward-progressing sundering of the arc in response to a northward-propagating back-arc basin extensional regime. This model appears to explain several localized and recent changes in the tectonic and magrnatic evolution of the Volcano Arc. Most important among these changes is the unusual composition of Iwo Jima volcanic rocks. This contrasts with normal arc tholeiites typical of the rest of the Izu-Volcano-Mariana and other primitive arcs in having alkaline tendencies, high concentrations of light REE and other incompatible elements, and relatively high silica contents. In spite of such fractionated characteristics, these lavas appear to be very early manifestations of a new volcanic and tectonic cycle in the southern Volcano Arc. These alkaline characteristics and indications of strong regional uplift are consistent with the recent development of an early stage of inter-arc basin rifting in the southern Volcano Arc. New bathymetric data are presented in support of this model which indicate: 1. (1) structural elements of the Mariana Trough extend north to the southern Volcano Arc. 2. (2) both the Mariana Trough and frontal arc shoal rapidly northwards as the Volcano Arc is approached. 3. (3) rugged bathymetry associated with the rifted Mariana Trough is replaced just south of Iwo Jima by the development of a huge dome (50-75 km diameter) centered around Iwo Jima. Such uplifted domes are the immediate precursors of rifts in other environments, and it appears that a similar situation may now exist in the southern Volcano Arc. The present distribution of unrifted Volcano Arc to the north and rifted Mariana Arc to the south is interpreted not as a stable tectonic configuration but as representing a tectonic "snapshot" of an arc in the process of being rifted to form a back-arc basin. ?? 1984.

Tokamak ARC damage

International Nuclear Information System (INIS)

Murray, J.G.; Gorker, G.E.

1985-01-01

Tokamak fusion reactors will have large plasma currents of approximately 10 MA with hundreds of megajoules stored in the magnetic fields. When a major plasma instability occurs, the disruption of the plasma current induces voltage in the adjacent conducting structures, giving rise to large transient currents. The induced voltages may be sufficiently high to cause arcing across sector gaps or from one protruding component to another. This report reviews a tokamak arcing scenario and provides guidelines for designing tokamaks to minimize the possibility of arc damage

Tokamak ARC damage

Energy Technology Data Exchange (ETDEWEB)

Murray, J.G.; Gorker, G.E.

1985-01-01

Tokamak fusion reactors will have large plasma currents of approximately 10 MA with hundreds of megajoules stored in the magnetic fields. When a major plasma instability occurs, the disruption of the plasma current induces voltage in the adjacent conducting structures, giving rise to large transient currents. The induced voltages may be sufficiently high to cause arcing across sector gaps or from one protruding component to another. This report reviews a tokamak arcing scenario and provides guidelines for designing tokamaks to minimize the possibility of arc damage.

Tephrostratigraphy and Provenance From IODP Expedition 352, Izu-Bonin Arc: Tracing Tephra Sources and Volumes From the Oligocene to Recent

Science.gov (United States)

Kutterolf, S.; Schindlbeck, J. C.; Robertson, A. H. F.; Avery, A.; Baxter, A. T.; Petronotis, K.; Wang, K.-L.

2018-01-01

Provenance studies of widely distributed tephras, integrated within a well-defined temporal framework, are important to deduce systematic changes in the source, scale, distribution, and changes in regional explosive volcanism. Here, we establish a robust tephrochronostratigraphy for a total of 157 marine tephra layers collected during IODP Expedition 352. We infer at least three major phases of highly explosive volcanism during Oligocene to Pleistocene time. Provenance analysis based on glass composition assigns 56 of the tephras to a Japan source, including correlations with 12 major and widespread tephra layers resulting from individual eruptions in Kyushu, Central Japan, and North Japan between 115 ka and 3.5 Ma. The remaining 101 tephras are assigned to four source regions along the Izu-Bonin arc. One, exclusively assigned to the Oligocene age, is proximal to the Bonin Ridge islands; two reflect eruptions within the volcanic front and back-arc of the central Izu-Bonin arc, and a fourth region corresponds to the Northern Izu-Bonin arc source. First-order volume estimates imply eruptive magnitudes ranging from 6.3 to 7.6 for Japan-related eruptions and between 5.5 and 6.5 for IBM eruptions. Our results suggest tephras between 30 and 22 Ma reflect a subtly different Izu-Bonin chemical signature compared to the recent arc. After a ˜9 Ma gap in eruption, tephra supply from the Izu-Bonin arc predominated from 15 to 5 Ma, and finally a subequal mixture of tephra sources from the (palaeo)Honshu and Izu-Bonin arcs occured within the last ˜5 Ma.

Seismic hazard assessment for Guam and the Northern Mariana Islands

Science.gov (United States)

Mueller, Charles S.; Haller, Kathleen M.; Luco, Nicholas; Petersen, Mark D.; Frankel, Arthur D.

2012-01-01

We present the results of a new probabilistic seismic hazard assessment for Guam and the Northern Mariana Islands. The Mariana island arc has formed in response to northwestward subduction of the Pacific plate beneath the Philippine Sea plate, and this process controls seismic activity in the region. Historical seismicity, the Mariana megathrust, and two crustal faults on Guam were modeled as seismic sources, and ground motions were estimated by using published relations for a firm-rock site condition. Maps of peak ground acceleration, 0.2-second spectral acceleration for 5 percent critical damping, and 1.0-second spectral acceleration for 5 percent critical damping were computed for exceedance probabilities of 2 percent and 10 percent in 50 years. For 2 percent probability of exceedance in 50 years, probabilistic peak ground acceleration is 0.94 gravitational acceleration at Guam and 0.57 gravitational acceleration at Saipan, 0.2-second spectral acceleration is 2.86 gravitational acceleration at Guam and 1.75 gravitational acceleration at Saipan, and 1.0-second spectral acceleration is 0.61 gravitational acceleration at Guam and 0.37 gravitational acceleration at Saipan. For 10 percent probability of exceedance in 50 years, probabilistic peak ground acceleration is 0.49 gravitational acceleration at Guam and 0.29 gravitational acceleration at Saipan, 0.2-second spectral acceleration is 1.43 gravitational acceleration at Guam and 0.83 gravitational acceleration at Saipan, and 1.0-second spectral acceleration is 0.30 gravitational acceleration at Guam and 0.18 gravitational acceleration at Saipan. The dominant hazard source at the islands is upper Benioff-zone seismicity (depth 40–160 kilometers). The large probabilistic ground motions reflect the strong concentrations of this activity below the arc, especially near Guam.

The study of geochemical behavior of rare earth elements in apatites from the Hormoz Island, Persian Gulf

Directory of Open Access Journals (Sweden)

Ali Rostami

2014-04-01

Full Text Available The study area is located about 3 km southwest of the Hormoz Island in the Hormozgan province, in the Persian Gulf. The main rock units in the region consist of a highly altered acidic pluton cratophyre, which is responsible for apatite formation, diabasic dike, marl and altered basalt. Apatite is the only phosphate mineral in the Hormoz Island, which has accumulated REE in its crystal structure. The amount of Na2O and SiO2 oxides in apatite are high and the average content of the main elements Fe, Mg, Al, Ca are 7.5 ppm, 365 ppm, 2880 ppm and 27.8%, respectively. The Y, Mn, Rb contents increase and Sr decreases with increasing magmatic differentiation. It shows that a moderate magmatic differentiation occurred during the crystallization of apatite. The total REE content in the Hormoz apatite is high (1.22-2.25%. LREE/HREE ratio is also high. This means that Hormoz apatites are enriched in light rare earth elements. The REE normalized pattern shows a negative slope with a negative Eu anomaly. According to various diagrams based on apatite composition, it is deduced that the Hormoz apatites belong to mafic I-type granitoids with high oxidation state (Fe2O3/FeO>1.

ALICE-ARC integration

International Nuclear Information System (INIS)

Anderlik, C; Gregersen, A R; Kleist, J; Peters, A; Saiz, P

2008-01-01

AliEn or Alice Environment is the Grid middleware developed and used within the ALICE collaboration for storing and processing data in a distributed manner. ARC (Advanced Resource Connector) is the Grid middleware deployed across the Nordic countries and gluing together the resources within the Nordic Data Grid Facility (NDGF). In this paper we will present our approach to integrate AliEn and ARC, in the sense that ALICE data management and job processing can be carried out on the NDGF infrastructure, using the client tools available in AliEn. The inter-operation has two aspects, one is the data management part and the second the job management aspect. The first aspect was solved by using dCache across NDGF to handle data. Therefore, we will concentrate on the second part. Solving it, was somewhat cumbersome, mainly due to the different computing models employed by AliEn and ARC. AliEN uses an Agent based pull model while ARC handles jobs through the more 'traditional' push model. The solution comes as a module implementing the functionalities necessary to achieve AliEn job submission and management to ARC enabled sites

Origin of depleted basalts during subduction initiation and early development of the Izu-Bonin-Mariana island arc: Evidence from IODP expedition 351 site U1438, Amami-Sankaku basin

Science.gov (United States)

Hickey-Vargas, R.; Yogodzinski, G. M.; Ishizuka, O.; McCarthy, A.; Bizimis, M.; Kusano, Y.; Savov, I. P.; Arculus, R.

2018-05-01

The Izu-Bonin-Mariana (IBM) island arc formed following initiation of subduction of the Pacific plate beneath the Philippine Sea plate at about 52 Ma. Site U1438 of IODP Expedition 351 was drilled to sample the oceanic basement on which the IBM arc was constructed, to better understand magmatism prior to and during the subduction initiation event. Site U1438 igneous basement Unit 1 (150 m) was drilled beneath 1460 m of primarily volcaniclastic sediments and sedimentary rock. Basement basalts are microcrystalline to fine-grained flows and form several distinct subunits (1a-1f), all relatively mafic (MgO = 6.5-13.8%; Mg# = 52-83), with Cr = 71-506 ppm and Ni = 62-342 ppm. All subunits are depleted in non-fluid mobile incompatible trace elements. Ratios such as Sm/Nd (0.35-0.44), Lu/Hf (0.19-0.37), and Zr/Nb (55-106) reach the highest values found in MORB, while La/Yb (0.31-0.92), La/Sm (0.43-0.91) and Nb/La (0.39-0.59) reach the lowest values. Abundances of fluid-mobile incompatible elements, K, Rb, Cs and U, vary with rock physical properties, indicating control by post-eruptive seawater alteration, but lowest abundances are typical of fresh, highly depleted MORBs. Mantle sources for the different subunits define a trend of progressive incompatible element depletion. Inferred pressures of magma segregation are 0.6-2.1 GPa with temperatures of 1280-1470 °C. New 40Ar/39Ar dates for Site U1438 basalts averaging 48.7 Ma (Ishizuka et al., 2018) are younger that the inferred age of IBM subduction initiation based on the oldest ages (52 Ma) of IBM forearc basalts (FAB) from the eastern margin of the Philippine Sea plate. FAB are hypothesized to be the first magma type erupted as the Pacific plate subsided, followed by boninites, and ultimately typical arc magmas over a period of about 10 Ma. Site U1438 basalts and IBM FABs are similar, but Site U1438 basalts have lower V contents, higher Ti/V and little geochemical evidence for involvement of slab-derived fluids. We

Piedra lata terrane of Uruguay: Rb-Sr geochronological data of two new paleoproterozoic (transamazonian) granitoids

International Nuclear Information System (INIS)

Cingolani, C; Bossi, J; Varela, R; Maldonado, S.; Pineyro, D.; Schipilov, A

2001-01-01

The Precambrian basement of Uruguay consists of three major terranes separated and crosscut by wide NE-striking subvertical transcurrent shear zones. The western terrane as a part of the Rio de la Plata Craton is known as the Piedra Alta Terrane (PAT). This is separated from the Nico Perez Terrane by the Sarandi del Yi-Piri olis subvertical shear zone (Bossi et al., 1993). A mafic dykes complex intruded the PAT at 1.8 Ga and was not later deformed. The PAT has equivalent rocks in the igneous-metamorphic basement of Tandilia region and the Martin Garcia Island, Buenos Aires Province, Argentina (Dalla Salda et al., 1988; Cingolani and Dalla Salda, 2000). The PAT shows no evidence of the Neoproterozoic orogenies and is considered a best preserved Paleoproterozoic block (Transamazonian Cycle). It contains three E-W trending belts of volcano-sedimentary rocks with low grade metamorphism. These are from south to north: Pando, San Jose and Andresito belts (Bossi et al., 1996). Associated with them, three granitic-gneissic zones he Ecilda Paullier, Florida and Feliciano- were recognized with magmatic intrusives emplaced at different crustal levels. The San Jose belt is the largest supracrustal unit and contains abundant volcanic and volcaniclastic rocks of low grade metamorphic (Paso Severino Fm.) with sheets of granitic rocks intercalated (Mutti et al., 1996; Bossi et al., 1996). The associated granitic rocks are of large areal extension, mostly granodiorites and tonalites, and minor monzogranite and gabbro (e.g. Cerro Rospide region), including xenoliths from Paso Severino Fm. Towards the north of the San Jose belt an important Florida granitized zone is developed in the central part of the PAT, where the Pintos massif was recognized. The main purpose of this contribution is to offer new Rb-Sr geochronological data from two granitoid units, The Cerro Rospide intrusive in Paso Severino Fm. and Pintos massif included in medium grade migmatic-metamorphic complex and its

Reconstructing multiple arc-basin systems in the Altai-Junggar area (NW China): Implications for the architecture and evolution of the western Central Asian Orogenic Belt

Science.gov (United States)

Li, Di; He, Dengfa; Tang, Yong

2016-05-01

.5-8.5) and εHf(t) (10.2-16.8) values, as well as young isotopic model ages. These Devonian-Carboniferous intermediate-felsic volcanics are interpreted as the products of partial melting of a juvenile lower crust with some contributions from mantle components in an evolved island arc setting from immature to mature island arc. The basin filling pattern and the distribution of arc volcanics and their zircon Hf model ages with the eruptive time suggest that the Wulungu Depression represents an island arc-basin system with the development of a Carboniferous retro-arc basin. In combination with previous work, we propose that the northern Junggar area comprises three arc-basin belts from south to north: the Darbut-Luliang-Karamaili, Wulungu-Yemaquan, and Saur-Fuhai-Dulate. Such tectonic subdivisions are consistent with the regional gravity and magnetic anomaly data. The recognition of the Wulungu arc-basin system demonstrates that the Junggar Basin is likely underlain by juvenile continental crust rather than ancient Precambrian basement, and also implies that the CAOB was built by amalgamation of multiple linear arcs and accretionary complexes.

Molybdenite in Pomona Island Granite at Lake Manapouri, Fiordland

International Nuclear Information System (INIS)

Scott, J.M.; Palin, J.M.

2011-01-01

A small occurrence of molybdenite (MoS 2 ) mineralisation has been discovered in the weakly A-type Pomona Island Granite on the shorelines of Lake Manapouri in eastern Fiordland. The disseminated appearance of molybdenite and the absence of quartz veins indicates that mineralisation is probably the product of magmatic and/or hydrothermal activity related to pluton crystallisation at c. 157 Ma, and not younger (c.128-116 Ma) shear zone-related mesothermal mineralisation as has been recently described from the Murchison Mountains to the north and Stewart Island to the south. Although apparently not of economic grade, the Pomona Island Granite locality is regionally important because it is the first direct pluton-related Mo-mineralisation event to be recognised in eastern Fiordland. This occurrence adds to the growing number and known styles of base metal occurrences within the Jurassic-Cretaceous magmatic arc (Outboard Median Batholith) that formed on or near the New Zealand Gondwana margin. Furthermore, the wide distribution of essentially uninvestigated A-type granites in the Outboard Median Batholith means that there may be further Mo-mineralised localities awaiting discovery. (author). 20 refs., 3 figs., 1 tab.

Multidisciplinary exploratory study of a geothermal resource in the active volcanic arc of Basse-Terre (Guadeloupe, Lesser Antilles)

Science.gov (United States)

Navelot, Vivien; Favier, Alexiane; Géraud, Yves; Diraison, Marc; Corsini, Michel; Verati, Chrystèle; Lardeaux, Jean-Marc; Mercier de Lépinay, Jeanne; Munschy, Marc

2017-04-01

The GEOTREF project (high enthalpy geothermal energy in fractured reservoirs), supported by the French government program, "Investissements d'avenir" develops a sustainable geothermal resource in the Vieux Habitants area, 8-km south of the currently exploited Bouillante geothermal field. The Basse Terre Island is a recent volcanic arc (meta-andesite. This metamorphism forms cleavage plans thanks to a pressure-solution mechanism. Mineralogical transformations associated with these cleavage planes have an impact on petrophysical properties. The solid phase density and porosity decrease. An anisotropy of permeability develops due to cleavage plans. Thermodynamics modelling based on the rock chemical composition and petrography observations emphasizes a steady-state mineral assemblage between 1.5 - 2 kbar and 280 - 320˚ C. This is consistent with an in situ measured volcanic arc conductive geothermal gradient of 70 ˚ C/km.

Geochemistry Petrography, thermobarometry and investigation of magmatic series in Mirabad- Chehel Khane granitoid body (east of Bouin– Miandasht, Isfahan province

Directory of Open Access Journals (Sweden)

Seyed Mohsen Tabatabaei Manesh

2017-11-01

Full Text Available On the base of petrology, the Mirabad- Chehel Khane granitoid, east of Bouin-Miandasht, dominantly consists of syenogranite, monzogranite, alkali granite and granodiorites. The main minerals of these rocks are quartz, alkali feldspar (Orthoclase, plagioclase (Albite - Oligoclase, biotite, ± amphibole with minor amount of allanite, zircon, titanite, apatite, ± tourmaline.  The biotite from the granites are Fe-rich type (annite and primary magmatic in origin. The composition of the biotites studied principally falls in the calc-alkaline subduction related I-type granite on the tectonomagmatic discrimination diagrams, which stand on their major element oxides. Which is consistent with the nature of their host rocks. The studied amphiboles are classified as calcic (ferro-hornblende which points to the I-type nature of the granitoid.  The tourmaline composition plots on the schorl - foitite field. The temperature for the alteration, on the base of chlorite composition from the syenogranite, is estimated around 350°C and from the monzogranite rocks about 341°C.  Based on the application of Al-in amphibole, a 3 Kbar pressure was determined for the syenogranite unit corresponding to the depth of 8-11 Km for the emplacement of the pluton. Hornblende- plagioclase thermometer shows 694 to 700°C for the equilibrium of these two minerals.

Arc-weld pool interactions

International Nuclear Information System (INIS)

Glickstein, S.S.

1978-08-01

The mechanisms involved in arc-weld pool interactions are extremely complex and no complete theory is presently available to describe much of the phenomena observed during welding. For the past several years, experimental and analytical studies have been undertaken at the Bettis Atomic Power Laboratory to increase basic understanding of the gas tungsten arc welding process. These studies have included experimental spectral analysis of the arc in order to determine arc temperature and analytical modeling of the arc and weld puddle. The investigations have been directed toward determining the cause and effects of variations in the energy distribution incident upon the weldment. In addition, the effect of weld puddle distortion on weld penetration was investigated, and experimental and analytical studies of weld process variables have been undertaken to determine the effects of the variables upon weld penetration and configuration. A review of the results and analysis of these studies are presented

Ages and petrogenesis of Jurassic and Cretaceous intrusive rocks in the Matsu Islands: Implications for lower crust modification beneath southeastern China

Science.gov (United States)

Chen, Jing-Yuan; Yang, Jin-Hui; Ji, Wei-Qiang

2017-12-01

Major and trace element, whole-rock Sr-, Nd- and Hf-isotope, zircon U-Pb age and Hf-O isotope data are reported for the intrusive rocks from the Matsu Islands in the coastal area of southeastern (SE) China, in order to study the ages, sources and petrogenesis of these rocks and evolution of the lower crust. The rocks include gneissic granite, massive granite, brecciated granite and diabase. Secondary ion mass spectrometer (SIMS) zircon U-Pb dating reveals that the rocks in the Matsu Islands were emplaced at ∼160 Ma, ∼130 Ma and ∼94 Ma. The Jurassic granites (∼160 Ma) have high SiO2 (74.1-74.5 wt%) and K2O + Na2O (8.32-8.33 wt%) contents and high Rb/Sr ratios of 0.6-1.2 and (La/Yb)CN ratios of 12.6-19.4. Their relatively high initial 87Sr/86Sr ratios (0.7074-0.7101), variable and negative εNd(t) values (-9.2 to -5.4), and variable zircon εHf(t) (-17.0 to +5.2) and δ18O (4.7-8.1‰) values indicate they were mainly derived from an ancient lower crustal source, but with involvement of high εHf(t) and low δ18O materials. The Early Cretaceous diabase (∼130 Ma) has SiO2 content of 56.5 wt%, relatively high MgO concentration, low initial 87Sr/86Sr ratio and negative εNd(t) value, similar to geochemical features of other Cretaceous mafic rocks in the coastal area of SE China. Zircons from the diabase have high εHf(t) values (-5.5 to +0.2) and relatively low δ18O values of 4.2-5.0‰. These characteristics indicate that the parental magma of the diabase was generated by partial melting of enriched lithospheric mantle, which have been metasomatised by altered oceanic crust-derived low-δ18O fluids. For the Cretaceous granitoids (∼130 Ma and 94 Ma), they have relatively low SiO2 (68.0-71.3 wt%) and K2O + Na2O (5.30-7.55 wt%) contents and low Rb/Sr ratios and (La/Yb)CN ratios of 5.8-7.1. They have low initial 87Sr/86Sr ratios (0.7071-0.7082), homogeneous εNd(t) (-4.3 to -4.5) and relatively high zircon εHf(t) values (-3.7 to +1.2) and low δ18O values (4

Two-phase southward subduction of the Mongol-Okhotsk oceanic plate constrained by Permian-Jurassic granitoids in the Erguna and Xing'an massifs (NE China)

Science.gov (United States)

Liu, Huichuan; Li, Yinglei; He, Hongyun; Huangfu, Pengpeng; Liu, Yongzheng

2018-04-01

Geodynamics of the Mongol-Okhotsk oceanic plate southward subduction are still pending problems. This paper presents new zircon LA-ICP-MS U-Pb age and whole-rock geochemical data for the middle Permian to Middle Jurassic granitoids in the western Erguna and central Xing'an massifs. 267-264 Ma, 241 Ma and 173 Ma I-type granites, and 216 Ma A-type granites were identified in the Erguna and Xing'an massifs (NE China). The I-type granites were produced by partial melting of the lower mafic crust. The 216 Ma A-type granites were derived from partial melting of crustal materials with tonalitic to granodioritic compositions. The 267-264 Ma and 241 Ma I-type granites were generated in an Andean-type arc setting, wheras the 216 Ma A-type and 173 Ma granites were formed in supra subduction extensional setting. We summarized previous age data of the middle Permian to Middle Jurassic magmtaic rocks in the Erguna and Xing'an Massifs and identified two isolated phases of magmatic activity including the ca. 267-225 Ma and ca. 215-165 Ma periods, with a significant magmatic gap at ca. 225-215 Ma. These middle Permian to Middle Jurassic magmatic rocks are closely related to the southward subduction of the Mongol-Okhotsk ocean. A two-stage tectonic evolutionary model was proposed to account for these geological observations in the Erguna and Xing'an massifs, involving Permian to Middle Triassic continuous southward subduction of the Mongol-Okhotsk oceanic plate and Late Triassic to Jurassic slab-rollback and supra subduction extension.

Electric arc hydrogen heaters

International Nuclear Information System (INIS)

Zasypin, I.M.

2000-01-01

The experimental data on the electric arc burning in hydrogen are presented. Empirical and semiempirical dependences for calculating the arc characteristics are derived. An engineering method of calculating plasma torches for hydrogen heating is proposed. A model of interaction of a hydrogen arc with a gas flow is outlined. The characteristics of plasma torches for heating hydrogen and hydrogen-bearing gases are described. (author)

Mercury concentrations of a resident freshwater forage fish at Adak Island, Aleutian Archipelago, Alaska.

Science.gov (United States)

Kenney, Leah A; von Hippel, Frank A; Willacker, James J; O'Hara, Todd M

2012-11-01

The Aleutian Archipelago is an isolated arc of over 300 volcanic islands stretching 1,600 km across the interface of the Bering Sea and North Pacific Ocean. Although remote, some Aleutian Islands were heavily impacted by military activities from World War II until recently and were exposed to anthropogenic contaminants, including mercury (Hg). Mercury is also delivered to these islands via global atmospheric transport, prevailing ocean currents, and biotransport by migratory species. Mercury contamination of freshwater ecosystems is poorly understood in this region. Total Hg (THg) concentrations were measured in threespine stickleback fish (Gasterosteus aculeatus) collected from eight lakes at Adak Island, an island in the center of the archipelago with a long military history. Mean THg concentrations for fish whole-body homogenates for all lakes ranged from 0.314 to 0.560 mg/kg dry weight. Stickleback collected from seabird-associated lakes had significantly higher concentrations of THg compared to non-seabird lakes, including all military lakes. The δ(13)C stable isotope ratios of stickleback collected from seabird lakes suggest an input of marine-derived nutrients and/or marine-derived Hg. Copyright © 2012 SETAC.

Geotectonic evolution of granitoid-greenstone belts from Crixas, Guarinos, Pilar de Goias - Hidrolina (Goias), Brazil

International Nuclear Information System (INIS)

Montalvao, R.M.G. de.

1985-01-01

The area in discussion, in a geologic context, constitutes one of the most interesting and complex, within the South American Platform, in Brazilian territory, over which granitoid-greenstone belts are outstanding. The Goiano Complex is the oldest unit in the geologic column herein adopted and composed largely of granitoids, gneiss and migmatites, in the amphibolite facies. Dated samples of the complex have shown two isochrones of Rb/Sr reference, the oldest one is 2.926 +- 65 m.y. and the 87 Sr/ 86 Sr initial ratio of 0.7001 and the youngest on of 2.471 + 20 m.y. and 87 Sr/ 86 Sr initial ratio of 0.701. Although the initial ratios data of the Rb/Sr isochron, as well as the parameters in the Pb/Pb analyses may indicate material of mantle source, it may be interpreted, with the help of field data, that the youngest values may indicate the reworking of crustal sialic rocks formed 2.925 +- 65 m.y. ago (oldest isochron), with primitive material contribution. Before such reworking volcanic-sedimentary sequence was deposited over the already formed sialic crust, and it is denominated Pilar de Goias Supergroup which characterizes the Greenstone Belts in the region. The Archean age for the supergroup was evident through the age results of its ultramafic rocks, showing 2.600 m.y. isochron age, with Sm/Nd methods. Besides the geochronology and field studies, basic information for the construction of the geologic column herein presented, there has been done petrographic and litho geochemical studies, both in the Goiano Complex and Pilar de Goias Supergroup, as for the Pilar de Goias Supergroup, the studies were concentrated on its mafic-ultramafic rocks. (author)

Consolidating NASA's Arc Jets

Science.gov (United States)

Balboni, John A.; Gokcen, Tahir; Hui, Frank C. L.; Graube, Peter; Morrissey, Patricia; Lewis, Ronald

2015-01-01

The paper describes the consolidation of NASA's high powered arc-jet testing at a single location. The existing plasma arc-jet wind tunnels located at the Johnson Space Center were relocated to Ames Research Center while maintaining NASA's technical capability to ground-test thermal protection system materials under simulated atmospheric entry convective heating. The testing conditions at JSC were reproduced and successfully demonstrated at ARC through close collaboration between the two centers. New equipment was installed at Ames to provide test gases of pure nitrogen mixed with pure oxygen, and for future nitrogen-carbon dioxide mixtures. A new control system was custom designed, installed and tested. Tests demonstrated the capability of the 10 MW constricted-segmented arc heater at Ames meets the requirements of the major customer, NASA's Orion program. Solutions from an advanced computational fluid dynamics code were used to aid in characterizing the properties of the plasma stream and the surface environment on the calorimeters in the supersonic flow stream produced by the arc heater.

Equilibrium motion of quict auroral arcs

International Nuclear Information System (INIS)

Lyatskij, V.B.; Leont'ev, S.V.

1981-01-01

Ionospheric plasma convection across auroral arc is investigated. It is shown that the existence of plasma area of increased concentration adjoining arc results not only from the arc but also is a factor supporting its existence. Under stable conditions the arc and plasma zone connected to it will move at a velocity different from a velocity of plasma convection. Arc velocity will be higher or lower as compared with convection velocity depending on arc orientation relative to an external electric field. At that the plasma zone is located either in front of or behind aurora polaris [ru

Bifurcation theory of ac electric arcing

International Nuclear Information System (INIS)

Christen, Thomas; Peinke, Emanuel

2012-01-01

The performance of alternating current (ac) electric arcing devices is related to arc extinction or its re-ignition at zero crossings of the current (so-called ‘current zero’, CZ). Theoretical investigations thus usually focus on the transient behaviour of arcs near CZ, e.g. by solving the modelling differential equations in the vicinity of CZ. This paper proposes as an alternative approach to investigate global mathematical properties of the underlying periodically driven dynamic system describing the electric circuit containing the arcing device. For instance, the uniqueness of the trivial solution associated with the insulating state indicates the extinction of any arc. The existence of non-trivial attractors (typically a time-periodic state) points to a re-ignition of certain arcs. The performance regions of arcing devices, such as circuit breakers and arc torches, can thus be identified with the regions of absence and existence, respectively, of non-trivial attractors. Most important for applications, the boundary of a performance region in the model parameter space is then associated with the bifurcation of the non-trivial attractors. The concept is illustrated for simple black-box arc models, such as the Mayr and the Cassie model, by calculating for various cases the performance boundaries associated with the bifurcation of ac arcs. (paper)

Electric contact arcing

International Nuclear Information System (INIS)

Cuthrell, R.E.

1976-01-01

Electrical contacts must function properly in many types of components used in nuclear weapon systems. Design, application, and testing of these components require detailed knowledge of chemical and physical phenomena associated with stockpile storage, stockpile testing, and operation. In the past, investigation of these phenomena has led to significant discoveries on the effects of surface contaminants, friction and wear, and the mechanics of closure on contact performance. A recent investigation of contact arcing phenomena which revealed that, preceding contact closure, arcs may occur at voltages lower than had been previously known is described. This discovery is important, since arcing may damage contacts, and repetitive testing of contacts performed as part of a quality assurance program might produce cumulative damage that would yield misleading life-test data and could prevent proper operation of the contacts at some time in the future. This damage can be avoided by determining the conditions under which arcing occurs, and ensuring that these conditions are avoided in contact testing

An integrated study of geochemistry and mineralogy of the Upper Tukau Formation, Borneo Island (East Malaysia): Sediment provenance, depositional setting and tectonic implications

Science.gov (United States)

Nagarajan, Ramasamy; Roy, Priyadarsi D.; Kessler, Franz L.; Jong, John; Dayong, Vivian; Jonathan, M. P.

2017-08-01

An integrated study using bulk chemical composition, mineralogy and mineral chemistry of sedimentary rocks from the Tukau Formation of Borneo Island (Sarawak, Malaysia) is presented in order to understand the depositional and tectonic settings during the Neogene. Sedimentary rocks are chemically classified as shale, wacke, arkose, litharenite and quartz arenite and consist of quartz, illite, feldspar, rutile and anatase, zircon, tourmaline, chromite and monazite. All of them are highly matured and were derived from a moderate to intensively weathered source. Bulk and mineral chemistries suggest that these rocks were recycled from sedimentary to metasedimentary source regions with some input from granitoids and mafic-ultramafic rocks. The chondrite normalized REE signature indicates the presence of felsic rocks in the source region. Zircon geochronology shows that the samples were of Cretaceous and Triassic age. Comparable ages of zircon from the Tukau Formation sedimentary rocks, granitoids of the Schwaner Mountains (southern Borneo) and Tin Belt of the Malaysia Peninsular suggest that the principal provenance for the Rajang Group were further uplifted and eroded during the Neogene. Additionally, presence of chromian spinels and their chemistry indicate a minor influence of mafic and ultramafic rocks present in the Rajang Group. From a tectonic standpoint, the Tukau Formation sedimentary rocks were deposited in a passive margin with passive collisional and rift settings. Our key geochemical observation on tectonic setting is comparable to the regional geological setting of northwestern Borneo as described in the literature.

Geodynamic interpretation of the 40Ar/39Ar dating of ophiolitic and arc-related mafics and metamafics of the northern part of the Anadyr-Koryak region

Science.gov (United States)

Palandzhyan, S.A.; Layer, P.W.; Patton, W.W.; Khanchuk, A.I.

2011-01-01

Isotope datings of amphibole-bearing mafics and metamafics in the northern part of the Anadyr-Koryak region allow clarification of the time of magmatic and metamorphic processes, which are synchronous with certain stages of the geodynamic development of the northwest segment of the Pacific mobile belt in the Phanerozoic. To define the 40Ar/39Ar age of amphiboles, eight samples of amphibole gabbroids and metamafics were selected during field work from five massifs representing ophiolites and mafic plutons of the island arc. Rocks from terranes of three foldbelts: 1) Pekulnei (Chukotka region), 2) Ust-Belaya (West Koryak region), and 3) the Tamvatnei and El'gevayam subterranes of the Mainits terrane (Koryak-Kamchatka region), were studied. The isotope investigations enabled us to divide the studied amphiboles into two groups varying in rock petrographic features. The first was represented by gabbroids of the Svetlorechensk massif of the Pekulnei Range and by ophiolites of the Tamvatnei Mts.; their magmatic amphiboles show the distribution of argon isotopes in the form of clearly distinguished plateau with an age ranging within 120-129 Ma. The second group includes metamorphic amphiboles of metagabbroids and apogabbro amphibolites of the Ust-Belaya Mts., Pekulnei and Kenkeren ranges (El'gevayam subterranes). Their age spectra show loss of argon and do not provide well defined plateaus the datings obtained for them are interpreted as minimum ages. Dates of amphiboles from the metagabbro of the upper tectonic plate of the Ust-Belaya allochthon points to metamorphism in the suprasubduction environment in the fragment of Late Neoproterozoic oceanic lithosphere in Middle-Late Devonian time, long before the Uda-Murgal island arc system was formed. The amphibolite metamorphism in the dunite-clinopyroxenite-metagabbro Pekulnei sequence was dated to occur at the Permian-Triassic boundary. The age of amphiboles from gabbrodiorites of the Kenkeren Range was dated to be Early

Arcing and surface damage in DITE

International Nuclear Information System (INIS)

Goodall, D.H.J.; McCracken, G.M.

1977-11-01

An investigation into the arcing damage on surfaces exposed to plasmas in the DITE tokamak is described. It has been found that arcing occurs on the fixed limiters, on probes inserted into the plasma and on parts of the torus structure. For surfaces parallel to the toroidal field most of the arcs run across the surface orthogonal to the field direction. Observations in the scanning electron microscope show that the arc tracks are formed by a series of melted craters characteristic of cathode arc spots. The amount of metal removed from the surface is consistent with the concentration of metal observed in the plasma. In plasmas with hydrogen gas puffing during the discharge or with injection of low Z impurities, the arc tracks are observed to be much shallower than in normal low density discharges. Several types of surface damage other than arc tracks have also been observed on probes. These phenomena occur less frequently than arcing and appear to be associated with abnormal discharge conditions. (author)

Petrogenesis and geodynamic implications of Ediacaran highly fractionated A-type granitoids in the north Arabian-Nubian Shield (Egypt): Constraints from whole-rock geochemistry and Sr-Nd isotopes

Science.gov (United States)

Sami, Mabrouk; Ntaflos, Theodoros; Farahat, Esam S.; Mohamed, Haroun A.; Hauzenberger, Christoph; Ahmed, Awaad F.

2018-04-01

Mineral chemistry, whole-rock geochemical and Sr-Nd isotopic data are reported for the Abu-Diab granitoids in the northern Arabian-Nubian Shield (ANS) of Egypt, to investigate their petrogenesis and geodynamic significance. Gabal Abu-Diab constitute a multiphase pluton, consisting largely of two-mica granites (TMGs) enclosing microgranular enclaves and intruded by garnet bearing muscovite granites (GMGs) and muscovite granites (MGs). The granitoids are weakly peraluminous (A/CNK = 1.01-1.12) and show high SiO2 (>72.9 wt%) and alkali (K2O + Na2O = 8.60-9.13) contents. The geochemical features show that they are post-collisional and highly fractionated A-type granitoids. Compared to their host TMGs, the microgranular enclaves are strongly peraluminous (A/CNK = 1.18-1.24) with lower SiO2 and higher abundances of trace elements. The TMGs are depleted in Ba, Nb, P and Ti and are enriched in LREEs relative to HREEs with weakly negative Eu anomalies (Eu/Eu* = 0.45-0.64). In contrast, the GMGs and MGs are extremely depleted in Ba, Sr and Ti and have tetrad-type REE patterns (TE1-3 = 1.1-1.3) with strongly pronounced negative Eu anomalies (Eu/Eu* = 0.03-0.26), similar to rare metals bearing granites. The Ediacaran (585 ± 24 Ma) TMGs, are characterized by restricted and relatively low initial 87Sr/86Sr ratios (0.70337-0.70382) that suggests their derivation from a depleted mantle source, with little contamination from the older continental crust. In contrast, the GMGs and MGs have extremely high 87Rb/86Sr and 87Sr/86Sr ratios that reflect the disturbance of the Rb-Sr isotopic system and may give an indication for magmatic-fluid interaction. However, all the granitoids display positive εNd(t) (4.41-6.57) and depleted mantle model ages TDM2 between 777 and 956 Ma, which indicate their derivation from a Neoproterozoic juvenile magma sources and preclude the occurrence of pre-Neoproterozoic crustal rocks in the ANS. The microgranular enclaves represent globules of hot mafic

Operator Bias in the Estimation of Arc Efficiency in Gas Tungsten Arc Welding

Directory of Open Access Journals (Sweden)

Fredrik Sikström

2015-03-01

Full Text Available In this paper the operator bias in the measurement process of arc efficiency in stationary direct current electrode negative gas tungsten arc welding is discussed. An experimental study involving 15 operators (enough to reach statistical significance has been carried out with the purpose to estimate the arc efficiency from a specific procedure for calorimetric experiments. The measurement procedure consists of three manual operations which introduces operator bias in the measurement process. An additional relevant experiment highlights the consequences of estimating the arc voltage by measuring the potential between the terminals of the welding power source instead of measuring the potential between the electrode contact tube and the workpiece. The result of the study is a statistical evaluation of the operator bias influence on the estimate, showing that operator bias is negligible in the estimate considered here. On the contrary the consequences of neglecting welding leads voltage drop results in a significant under estimation of the arc efficiency.

Crustal rifting and magmatic underplating in the Izu-Ogasawara (Bonin) intra-oceanic arc detected by active source seismic studies

Science.gov (United States)

Takahashi, N.; Kodaira, S.; Yamashita, M.; Miura, S.; Sato, T.; No, T.; Tatsumi, Y.; Kaneda, Y.

2009-12-01

Japan Agency for Marine-Earth Science and Technology (JAMSTEC) has carried out seismic experiments using a multichannel reflection system and ocean bottom seismographs (OBSs) in the Izu-Ogasawara (Bonin)-Mariana (IBM) arc region since 2002 to understand growth process of continental crust. The source was an airgun array with a total capacity of 12,000 cubic inches and the OBSs as the receiver were deployed with an interval of 5 km for all seismic refraction experiments. As the results, we obtained crustal structures across the whole IBM arc with an interval of 50 km and detected the structural characteristics showing the crustal growth process. The IBM arc is one of typical oceanic island arc, which crustal growth started from subduction of an oceanic crust beneath the other oceanic crust. The arc crust has developed through repeatedly magmatic accretion from subduction slab and backarc opening. The volcanism has activated in Eocene, Oligocene, Miocene and Quaternary (e.g., Taylor, 1992), however, these detailed locations of past volcanic arc has been remained as one of unknown issues. In addition, a role of crustal rifting for the crustal growth has also been still unknown issue yet. Our seismic structures show three rows of past volcanic arc crusts except current arc. A rear arc and a forearc side have one and two, respectively. The first one, which was already reported by Kodaira et al. (2008), distributes in northern side from 27 N of the rear arc region. The second one, which develops in the forearc region next to the recent volcanic front, distributes in whole of the Izu-Ogasawara arc having crustal variation along arc direction. Ones of them sometimes have thicker crust than that beneath current volcanic front and no clear topographic high. Last one in the forearc connects to the Ogasawara Ridge. However, thickest crust is not always located beneath these volcanic arcs. The initial rifting region like the northern end of the Mariana Trough and the Sumisu

Arcing phenomena in fusion devices workshop

International Nuclear Information System (INIS)

Clausing, R.E.

1979-01-01

The workshop on arcing phenomena in fusion devices was organized (1) to review the pesent status of our understanding of arcing as it relates to confinement devices, (2) to determine what informaion is needed to suppress arcing and (3) to define both laboratory and in-situ experiments which can ultimately lead to reduction of impurities in the plasma caused by arcing. The workshop was attended by experts in the area of vacuum arc electrode phenomena and ion source technology, materials scientists, and both theoreticians and experimentalists engaged in assessing the importance of unipolar arcing in today's tokamaks. Abstracts for papers presented at the workshop are included

Multiphysics Simulation of Welding-Arc and Nozzle-Arc System: Mathematical-Model, Solution-Methodology and Validation

Science.gov (United States)

Pawar, Sumedh; Sharma, Atul

2018-01-01

This work presents mathematical model and solution methodology for a multiphysics engineering problem on arc formation during welding and inside a nozzle. A general-purpose commercial CFD solver ANSYS FLUENT 13.0.0 is used in this work. Arc formation involves strongly coupled gas dynamics and electro-dynamics, simulated by solution of coupled Navier-Stoke equations, Maxwell's equations and radiation heat-transfer equation. Validation of the present numerical methodology is demonstrated with an excellent agreement with the published results. The developed mathematical model and the user defined functions (UDFs) are independent of the geometry and are applicable to any system that involves arc-formation, in 2D axisymmetric coordinates system. The high-pressure flow of SF6 gas in the nozzle-arc system resembles arc chamber of SF6 gas circuit breaker; thus, this methodology can be extended to simulate arcing phenomenon during current interruption.

Metallogenetic characterization of granitoid rocks through geochemical prospection: the Lagoa Real example related to uranium mineralization in Bahia state, Brazil; Caracterizacao metalogenetica de corpos gratinoides atraves de prospeccao geoquimica: o exemplo da suite intrusiva Lagoa Real relacionada a mineralizacoes de uranio no Estado da Bahia

Energy Technology Data Exchange (ETDEWEB)

Oliveira, J.E., E-mail: cprmsa@bahianet.com.br [Servico Geologico do Brasil (GEREMI/SUREG/SA/CPRM), Salvador, BA (Brazil)

2011-07-01

Within a broad metallogenetic evaluation program carried out by CPRM - Geological Survey of Brazil in covenant with the CBPM - Companhia Baiana de Pesquisa Mineral in the central part of the Sao Francisco Craton, the Lagoa Real granitoid rocks was one of the selected targets. The work included geochemical exploration supplemented by follow-in survey and integrated 1:200.000 scale geochemical cartography. The Lagoa Real granitoid was recognized with composition ranging from monzogranitic to alcaligranitic type. The geochemical surveying led to the definition of the metallogenetic specialization of the granitoid rock, with characteristic geochemical and mineralogic associations. These associations are related to uranium mineralization. The genetic model using stream sediment and pan concentrate data, show similarity with the metallogenetic model of zonal partitioning proposed by Routhier (1963), for plutonogenic lode deposits with potential for Sn, W, Nb, Be, REE, Au, and U. In this work emphasis is given to the importance of the integrated use of different prospective methods toward the evaluation of granitoid systems, particularly the combination of geochemical surveying methods with results for a better understanding of the geologic and metallogenetic settings. (author)

Numerical investigation of the double-arcing phenomenon in a cutting arc torch

International Nuclear Information System (INIS)

Mancinelli, B. R.; Minotti, F. O.; Kelly, H.; Prevosto, L.

2014-01-01

A numerical investigation of the double-arcing phenomenon in a cutting arc torch is reported. The dynamics of the double-arcing were simulated by using a two-dimensional model of the gas breakdown development in the space-charge layer contiguous to the nozzle of a cutting arc torch operated with oxygen. The kinetic scheme includes ionization of heavy particles by electron impact, electron attachment, electron detachment, electron–ion recombination, and ion–ion recombination. Complementary measurements during double-arcing phenomena were also conducted. A marked rise of the nozzle voltage was found. The numerical results showed that the dynamics of a cathode spot at the exit of the nozzle inner surface play a key role in the raising of the nozzle voltage, which in turn allows more electrons to return to the wall at the nozzle inlet. The return flow of electrons thus closes the current loop of the double-arcing. The increase in the (floating) nozzle voltage is due to the fact that the increased electron emission at the spot is mainly compensated by the displacement current (the ions do not play a relevant role due to its low-mobility) until that the stationary state is achieved and the electron return flow fully-compensates the electron emission at the spot. A fairly good agreement was found between the model and the experiment for a spot emission current growth rate of the order of 7 × 10 4  A/s.

[Analysis of X-Ray Fluorescence Spectroscopy and Plasma Mass Spectrometry of Pangxidong Composite Granitoid Pluton and Its Implications for Magmatic Differentiation].

Science.gov (United States)

Zeng, Chang-yu; Ding, Ru-xin; Li, Hong-zhong; Zhou, Yong-zhang; Niu, Jia; Zhang, Jie-tang

2015-11-01

Pangxidong composite granitoid pluton located in the southwestern margin of Yunkai massif. The metamorphic grade of this pluton increases from outside to inside, that is, banded-augen granitic gneisses, gneissoid granites and granites distribute in order from edge to core. X-Ray Fluorescence Spectroscopy and Plasma Mass Spectrometry are conducted to study the geochemical characteristics of the three types of rocks. The result shows that all the three types of rocks are peraluminous rocks and their contents of main elements and rare earth elements change gradually. From granitic gneisses to granites, the contents of Al₂O₃, CaO, MgO, TiO₂, total rare earth elements and light rare earth elements increase, but the contents of SiO₂ and heavy rare earth elements decrease. It is suggested that the phylogenetic relationship exists between granitic gneisses, gneissoid granites and granites during the multi-stage tectonic evolution process. Furthermore, the remelting of metamorphosed supracrustal rocks in Yunkai massif is probably an important cause of granitoid rocks forming. The evolutionary mechanism is probably that SiO₂ and heavy rare earth elements were melt out from the protolith and gradually enriched upward, but Al₂O₃, CaO, MgO, TiO₂ and light rare earth elements enriched downward.

Seismically active column and volcanic plumbing system beneath the island arc of the Izu-Bonin subduction zone

Czech Academy of Sciences Publication Activity Database

Špičák, Aleš; Vaněk, Jiří; Hanuš, Václav

2009-01-01

Roč. 179, č. 3 (2009), s. 1301-1312 ISSN 0956-540X Institutional research plan: CEZ:AV0Z30120515 Keywords : seismicity and tectonics * volcano seismology * subduction zone processes * volcanic arc processes * magma migration and fragmentation * Pacific Ocean Subject RIV: DC - Siesmology, Volcanology, Earth Structure Impact factor: 2.435, year: 2009

Basins in ARC-continental collisions

Science.gov (United States)

Draut, Amy E.; Clift, Peter D.; Busby, Cathy; Azor, Antonio

2012-01-01

Arc-continent collisions occur commonly in the plate-tectonic cycle and result in rapidly formed and rapidly collapsing orogens, often spanning just 5-15 My. Growth of continental masses through arc-continent collision is widely thought to be a major process governing the structural and geochemical evolution of the continental crust over geologic time. Collisions of intra-oceanic arcs with passive continental margins (a situation in which the arc, on the upper plate, faces the continent) involve a substantially different geometry than collisions of intra-oceanic arcs with active continental margins (a situation requiring more than one convergence zone and in which the arc, on the lower plate, backs into the continent), with variable preservation potential for basins in each case. Substantial differences also occur between trench and forearc evolution in tectonically erosive versus tectonically accreting margins, both before and after collision. We examine the evolution of trenches, trench-slope basins, forearc basins, intra-arc basins, and backarc basins during arc-continent collision. The preservation potential of trench-slope basins is low; in collision they are rapidly uplifted and eroded, and at erosive margins they are progressively destroyed by subduction erosion. Post-collisional preservation of trench sediment and trench-slope basins is biased toward margins that were tectonically accreting for a substantial length of time before collision. Forearc basins in erosive margins are usually floored by strong lithosphere and may survive collision with a passive margin, sometimes continuing sedimentation throughout collision and orogeny. The low flexural rigidity of intra-arc basins makes them deep and, if preserved, potentially long records of arc and collisional tectonism. Backarc basins, in contrast, are typically subducted and their sediment either lost or preserved only as fragments in melange sequences. A substantial proportion of the sediment derived from

Rb-Sr isochronous dating of granitoids of Dumbier zone of Low Tatras (Western Carpathians)

International Nuclear Information System (INIS)

Bagdasaryan, G.P.; Gukasyan, R.Kh.; Cambel, B.; Vesel'skij, J.

1985-01-01

The results are discussed of isotopic-geochronological research and age determination of characteristic samples of granitoid rocks, obtained by the Rb/Sr isochronous method. The samples were biotite granodiorites and granites taken from various parts of the Dumbier massif and small granite bodies of the Kralicka type. Rb/Sr isochrones of the rock samples show identical age values: 362+-21 m.y. for the Dumbier massif and 365+-17 m.y. correspnding to the Middle - Upper Devonian. Initial 87 Sr/ 86 Sr ratios equal to 0.7079 and 0.7157, respectively, allow to make a presumption that the rocks of the Dumbier massif may have been derived both from crustal and from mantle sources while granites of the Kralicka type are close to the rocks of the crustal origin

Teaching with ArcGIS Pro

OpenAIRE

Theller, Larry

2016-01-01

For Fall semester 2016 the ABE department moved the course ASM 540 Basic GIS from ArcGIS Desktop 10.2 to ArcGIS Pro 1.3. This software from ESRI has a completely new look and feel, (ribbon-based rather than cascading menus) and is a true 64 bit application, capable of multi-threading, and built on Python 3. After ArcGIS Desktop 10.5 is released, desktop ends and the future release will be ArcGIS Pro; so it makes sense to switch sooner rather than later. This talk will discuss some issues and...

ALICE: ARC integration

CERN Document Server

Anderlik, C; Kleist, J; Peters, A; Saiz, P

2008-01-01

AliEn or Alice Environment is the Grid middleware developed and used within the ALICE collaboration for storing and processing data in a distributed manner. ARC (Advanced Resource Connector) is the Grid middleware deployed across the Nordic countries and gluing together the resources within the Nordic Data Grid Facility (NDGF). In this paper we will present our approach to integrate AliEn and ARC, in the sense that ALICE data management and job processing can be carried out on the NDGF infrastructure, using the client tools available in AliEn. The inter-operation has two aspects, one is the data management part and the second the job management aspect. The first aspect was solved by using dCache across NDGF to handle data. Therefore, we will concentrate on the second part. Solving it, was somewhat cumbersome, mainly due to the different computing models employed by AliEn and ARC. AliEN uses an Agent based pull model while ARC handles jobs through the more 'traditional' push model. The solution comes as a modu...

Crustal melting and recycling: geochronology and sources of Variscan syn-kinematic anatectic granitoids of the Tormes Dome (Central Iberian Zone). A U-Pb LA-ICP-MS study

Science.gov (United States)

López-Moro, F. J.; López-Plaza, M.; Gutiérrez-Alonso, G.; Fernández-Suárez, J.; López-Carmona, A.; Hofmann, M.; Romer, R. L.

2018-04-01

In this study, we report U-Pb Laser Ablation ICP-MS zircon and ID-TIMS monazite ages for peraluminous granitoid plutons (biotite ± muscovite ± cordierite ± sillimanite) in the Tormes Dome, one of the gneiss-cored domes located in the Central Iberian Zone of the Variscan belt of northern Spain. Textural domains in zircon, interpreted to represent the magmatic crystallization of the granitoids (and one monazite fraction in the Ledesma pluton) yielded ages around 320 Ma, in agreement with other geochronological studies in the region. This age is interpreted to date the timing of decompression crustal melting driven by the extensional collapse of the orogenic belt in this domain of the Variscan chain of western Europe. In addition, there are several populations of inherited (xenocrystic) zircon: (1) Carboniferous zircon crystals (ca. 345 Ma) as well as one of the monazite fractions in the coarse-grained facies of the Ledesma pluton that also yielded an age of ca. 343 Ma. (2) Devonian-Silurian zircon xenocrysts with scattered ages between ca. 390 and 432 Ma. (3) Middle Cambrian-Ordovician (ca. 450-511 Ma). (4) Ediacaran-Cryogenian zircon ages (ca. 540-840 Ma). (5) Mesoproterozoic to Archaean zircon (900-2700 Ma). The abundance of Carboniferous-inherited zircon shows that crustal recycling/cannibalization may often happen at a fast pace in orogenic scenarios with only short lapses of quiescence. In our case study, it seems plausible that a "crustal layer" of ca. 340 Ma granitoids/migmatites was recycled, partially or totally, only 15-20 My after its emplacement.

Intensity-modulated arc therapy simplified

International Nuclear Information System (INIS)

Wong, Eugene; Chen, Jeff Z.; Greenland, Jonathan

2002-01-01

Purpose: We present a treatment planning strategy for intensity-modulated radiation therapy using gantry arcs with dynamic multileaf collimator, previously termed intensity-modulated arc therapy (IMAT). Methods and Materials: The planning strategy is an extension of the photon bar arc and asymmetric arc techniques and is classified into three levels of complexity, with increasing number of gantry arcs. This principle allows us to generalize the analysis of the number of arcs required for intensity modulation for a given treatment site. Using a phantom, we illustrate how the current technique is more flexible than the photon bar arc technique. We then compare plans from our strategy with conventional three-dimensional conformal treatment plans for three sites: prostate (prostate plus seminal vesicles), posterior pharyngeal wall, and chest wall. Results: Our strategy generates superior IMAT treatment plans compared to conventional three-dimensional conformal plans. The IMAT plans spare critical organs well, and the trade-off for simplicity is that the dose uniformity in the target volume may not rival that of true inverse treatment plans. Conclusions: The analyses presented in this paper give a better understanding of IMAT plans. Our strategy is easier to understand and more efficient in generating plans than inverse planning systems; our plans are also simpler to modify, and quality assurance is more intuitive

Seismotectonics of the central segment of the Indonesian Arc

Science.gov (United States)

Eva, C.; Cattaneo, M.; Merlanti, F.

1988-01-01

In this paper, a revision of seismicity affecting the central segment of the Indonesian island arc ranging between 110° and 126° E is presented. Using the areal and in-depth distribution of seismic activity, strain release maps and focal mechanisms, lateral changes in the Wadati-Benioff zone have been analyzed to determine possible boundaries between portions of lithosphere with different subduction geometries. The seismicity pattern indicates that the Sumbawa-Flores-Wetar sector shows different forms of behaviour with respect to the adjacent sectors. These include driving mechanism, inclination and continuity of the subducting slab and subduction features. This area therefore seems to be isolated from the Sunda and Banda arcs by two principal boundaries, these having a nearly N-S trend in the Bali region and with a nearly E-W trend in the region ranging between Wetar-Northern Timor and Tanibar. The first boundary, characterized by an absolute minimum of seismic activity at all ranges of depth, has been interpreted in terms of subduction of the Roo Rise aseismic bathymetric ridge. For the second boundary, dividing a northwardly steeply-dipping slab from an E-W subducting slab dipping with an angle of 30 ° -40 °, a tear in the upper part (depth less than 300 km) and a hinge fault system in the deepest part of the lithosphere, have been proposed. From the analysis of focal mechanisms of shallow earthquakes, it was inferred that the central part of the Indonesian Arc is subject to a vortex-shaped stress field centred on the Savu Basin. In this model, the compressive axes appear to rotate counterclockwise (from SW to NNE) in the Sumba-Sumbawa-Western Flores region and clockwise (from W to NNW) in the Timor-Eastern Flores zone. To interpret these features, on the basis of seismological evidence, a lateral discontinuity in the arc-trench system close to Sumba, a collision between Sumba and Sumbawa and a rotation towards the north-northeast of Sumba have been

Vacuum arc anode phenomena

International Nuclear Information System (INIS)

Miller, H.C.

1976-01-01

A brief review of anode phenomena in vacuum arcs is presented. Discussed in succession are: the transition of the arc into the anode spot mode; the temperature of the anode before, during and after the anode spot forms; and anode ions. Characteristically the anode spot has a temperature of the order of the atmospheric boiling point of the anode material and is a copious source of vapor and energetic ions. The dominant mechanism controlling the transition of the vacuum arc into the anode spot mode appears to depend upon the electrode geometry, the electrode material, and the current waveform of the particular vacuum arc being considered. Either magnetic constriction in the gap plasma or gross anode melting can trigger the transition; indeed, a combination of the two is a common cause of anode spot formation

Effects of lorentz force on flow fields of free burning arc and wall stabilized non-transferred arc

International Nuclear Information System (INIS)

Peng Yi; Huang Heji; Pan Wenxia

2013-01-01

The flow fields of two typical DC plasma arcs, namely the transferred free burning arc and the non-transferred arc were simulated by solving hydrodynamic equations and electromagnetic equations. The effects of the Lorentz force on the characteristics of the flow fields of these two typical DC plasma arcs were estimated. Results show that in the case of the free burning arc, the Lorentz force due to the current self-induced magnetic field has significant impact on the flow fields, as the self-induced magnetic compression is the main arc constraint mechanism. However, in the case of the non-transferred arc generated in a torch with long and narrow inter-electrode inserts and an abruptly expanded anode, the Lorentz force has limited impact on the flow fields of the plasma especially at the downstream of the inter-electrode inserts, compared with the strong wall constraints and relatively high aerodynamic force. This is because the ratio of the electromagnetic force to the aerodynamic force is only about 0.01 in this region. When the main consideration is outlet parameters of the wall stabilized non-transferred DC arc plasma generator, in order to improve the efficiency of the numerical simulation program, the Lorentz force could be neglected in the non-transferred arc in some cases. (authors)

Eclogite-facies metamorphism in impure marble from north Qaidam orogenic belt: Geodynamic implications for early Paleozoic continental-arc collision

Science.gov (United States)

Chen, Xin; Xu, Rongke; Schertl, Hans-Peter; Zheng, Youye

2018-06-01

In the North Qaidam ultrahigh-pressure (UHP) metamorphic belt, impure marble and interbedded eclogite represent a particular sedimentary provenance and tectonic setting, which have important implications for a controversial problem - the dynamic evolution of early Paleozoic subduction-collision complexes. In this contribution, detailed field work, mineral chemistry, and whole-rock geochemistry are presented for impure marble to provide the first direct evidence for the recycling of carbonate sediments under ultrahigh-pressures during subduction and collision in the Yuka terrane, in the North Qaidam UHP metamorphic belt. According to conventional geothermobarometry, pre-peak subduction to 0.8-1.3 GPa/485-569 °C was followed by peak UHP metamorphism at 2.5-3.3 GPa/567-754 °C and cooling to amphibolite facies conditions at 0.6-0.7 GPa/571-589 °C. U-Pb dating of zircons from impure marble reveals a large group with ages ranging from 441 to 458 Ma (peak at 450 Ma), a smaller group ranging from 770 to 1000 Ma (peak at 780 Ma), and minor >1.8 Ga zircon aged ca. 430 Ma UHP metamorphism. The youngest detrital zircons suggest a maximum depositional age of ca. 442 Ma and a burial rate of ca. 1.0-1.1 cm/yr when combined with P-T conditions and UHP metamorphic age. The REE and trace element patterns of impure marble with positive Sr and U anomalies, negative high field strength elements (Nb, Ta, Zr, Hf, and Ti), and Ce anomalies imply that the marble had a marine limestone precursor. Impure marble intercalated with micaschist and eclogite was similar to limestone and siltstone protoliths deposited in continental fore-arc or arc setting with basic volcanic activity. Therefore, the Yuka terrane most likely evolved in a continental island arc setting during the Paleozoic. These data suggest that metasediments were derived from a mixture of Proterozoic continental crust and juvenile early Paleozoic oceanic and/or island arc crust. In addition, their protoliths were likely

Dosimetric comparison of helical tomotherapy, RapidArc, and a novel IMRT and Arc technique for esophageal carcinoma

International Nuclear Information System (INIS)

Martin, Spencer; Chen, Jeff Z.; Rashid Dar, A.; Yartsev, Slav

2011-01-01

Purpose: To compare radiotherapy treatment plans for mid- and distal-esophageal cancer with primary involvement of the gastroesophageal (GE) junction using a novel IMRT and Arc technique (IMRT and Arc), helical tomotherapy (HT), and RapidArc (RA1 and RA2). Methods and materials: Eight patients treated on HT for locally advanced esophageal cancer with radical intent were re-planned for RA and IMRT and Arc. RA plans employed single and double arcs (RA1 and RA2, respectively), while IMRT and Arc plans had four fixed-gantry IMRT fields and a conformal arc. Dose-volume histogram statistics, dose uniformity, and dose homogeneity were analyzed to compare treatment plans. Results: RA2 plans showed significant improvement over RA1 plans in terms of OAR dose and PTV dose uniformity and homogeneity. HT plan provided best dose uniformity (p = 0.001) and dose homogeneity (p = 0.002) to planning target volume (PTV), while IMRT and Arc and RA2 plans gave lowest dose to lungs among four radiotherapy techniques with acceptable PTV dose coverage. Mean V 10 of the lungs was significantly reduced by the RA2 plans compared to IMRT and Arc (40.3%, p = 0.001) and HT (66.2%, p 15 of the lungs for the RA2 plans also showed significant improvement over the IMRT and Arc (25.2%, p = 0.042) and HT (34.8%, p = 0.027) techniques. These improvements came at the cost of higher doses to the heart volume compared to HT and IMRT and Arc techniques. Mean lung dose (MLD) for the IMRT and Arc technique (21.2 ± 5.0% of prescription dose) was significantly reduced compared to HT (26.3%, p = 0.004), RA1 (23.3%, p = 0.028), and RA2 (23.2%, p = 0.017) techniques. Conclusion: The IMRT and Arc technique is a good option for treating esophageal cancer with thoracic involvement. It achieved optimal low dose to the lungs and heart with acceptable PTV coverage. HT is a good option for treating esophageal cancer with little thoracic involvement as it achieves superior dose conformality and uniformity. The RA2

The Sr:Ba:Rb ratio and zircon typology in granitoid complexes of Sao Paulo, Parana and Minas Gerais states (Brazil)

International Nuclear Information System (INIS)

Wernick, E.; Galembeck, T.M.B.; Artur, A.C.; Rigo Junior, L.; Weber-Diefenbach, K.

1990-01-01

Chemical (Sr: Ba: Rb) and zircon typology data from the Nazare Paulista, Mairipora/Cantareira, Cunhaporanga, Tres Corregos, Morungaba, Socorro, Itu, Graciosa and Serra Carambei granitoid complexes from the states of Minas Gerais, Sao Paulo and Parana (SE/S Brazil) are presented and discussed. By the zircon typology method these complexes are reffered, respectively, to the 2nd crustal, 3rd crustal/low temperature C-A, low temperature C-A, medium temperature C-A, medium/high temperature C-A, K-SA/Alkaline and alkaline serie which are considered as generated under increasing temperature associated with a progressive major participation of mantellic material. All these series, with the exception of the medium to high temperature calc-alkaline complexes Socorro and Morungaba whose chemical data come from several laboratories, display different positions and behaviour in the Sr: Ba: Rb diagram which reinforce the use of the zircon typology method in the study of granitoids. From the 2nd crustal serie up to the medium temperature C-A serie the complexes show a regular shift in their chemical composition which became progressively richer in Sr and depleted in Rb. The highly differentiades hypersolvus Serra do Carambei granite is strongly enriched in Rb and impoverish in Ba with respect to the Itu and the Graciosa complex which itself is slighly more depleted in Sr than the Itu granite. (author)

Feedback Linearization Based Arc Length Control for Gas Metal Arc Welding

DEFF Research Database (Denmark)

Thomsen, Jesper Sandberg

2005-01-01

a linear system to be controlled by linear state feedback control. The advantage of using a nonlinear approach as feedback linearization is the ability of this method to cope with nonlinearities and different operating points. However, the model describing the GMAW process is not exact, and therefore......In this paper a feedback linearization based arc length controller for gas metal arc welding (GMAW) is described. A nonlinear model describing the dynamic arc length is transformed into a system where nonlinearities can be cancelled by a nonlinear state feedback control part, and thus, leaving only......, the cancellation of nonlinear terms might give rise to problems with respect to robustness. Robustness of the closed loop system is therefore nvestigated by simulation....

Petrochemical and Mineralogical Constraints on the Source and Processes of Uranium Mineralisation in the Granitoids of Zing-Monkin Area, Adamawa Massif, NE Nigeria

International Nuclear Information System (INIS)

Haruna, I. V.; Orazulike, D. M.; Ofulume, A. B.; Mamman, Y. D.

2011-01-01

Zing-Monkin area, located in the northern part of Adamawa Massif, is underlain by extensive exposures of moderately radioactive granodiorites, anatectic migmatites, equigranular granites, porphyritic granites and highly radioactive fine-grained granites with minor pegmatites. Selected major and trace element petrochemical investigations of the rocks show that a progression from granodiorite through migmatite to granites is characterised by depletion of MgO, CaO, Fe 2 O 3, Sr, Ba, and Zr, and enrichment of SiO 2 and Rb. This trend is associated with uranium enrichment and shows a chemical gradation from the more primitive granodiorite to the more evolved granites. Electron microprobe analysis shows that the uranium is content in uranothorite and in accessories, such as monazite, titanite, apatite, epidote and zircon. Based on petrochemical and mineralogical data, the more differentiated granitoids (e.g., fine-grained granite) bordering the Benue Trough are the immediate source of the uranium prospect in Bima Sandstone within the Trough. Uranium was derived from the granitoids by weathering and erosion. Transportation and subsequent interaction with organic matter within the Bima Sandstone led to precipitation of insoluble secondary uranium minerals in the Benue Trough.

Correlation methods in cutting arcs

Energy Technology Data Exchange (ETDEWEB)

Prevosto, L; Kelly, H, E-mail: prevosto@waycom.com.ar [Grupo de Descargas Electricas, Departamento Ing. Electromecanica, Universidad Tecnologica Nacional, Regional Venado Tuerto, Laprida 651, Venado Tuerto (2600), Santa Fe (Argentina)

2011-05-01

The present work applies similarity theory to the plasma emanating from transferred arc, gas-vortex stabilized plasma cutting torches, to analyze the existing correlation between the arc temperature and the physical parameters of such torches. It has been found that the enthalpy number significantly influence the temperature of the electric arc. The obtained correlation shows an average deviation of 3% from the temperature data points. Such correlation can be used, for instance, to predict changes in the peak value of the arc temperature at the nozzle exit of a geometrically similar cutting torch due to changes in its operation parameters.

Correlation methods in cutting arcs

International Nuclear Information System (INIS)

Prevosto, L; Kelly, H

2011-01-01

The present work applies similarity theory to the plasma emanating from transferred arc, gas-vortex stabilized plasma cutting torches, to analyze the existing correlation between the arc temperature and the physical parameters of such torches. It has been found that the enthalpy number significantly influence the temperature of the electric arc. The obtained correlation shows an average deviation of 3% from the temperature data points. Such correlation can be used, for instance, to predict changes in the peak value of the arc temperature at the nozzle exit of a geometrically similar cutting torch due to changes in its operation parameters.

A prolonged granitoid formation in Saglek Block, Labrador: Zonal growth and crustal reworking of continental crust in the Eoarchean

Directory of Open Access Journals (Sweden)

Tsuyoshi Komiya

2017-03-01

We made a detailed sketch of a small outcrop in St. John's Harbour South (SJHS area, and classified the orthogneisses and mafic enclaves into seven generations based on the geologic occurrence. The first and second generations comprise mafic rocks and lack magmatic zircons. We conducted CL imaging and U-Pb dating of zircons from the third, sixth and seventh generation of the orthogneisses to estimate the protolith ages at 3902 ± 25, 3892 ± 33 and 3897 ± 33 Ma for each, supporting the presence of the over 3.9 Ga Iqaluk Gneiss. The geological occurrence that the mafic rocks occur as enclaves within the 3.9 Ga Iqaluk Gneiss indicates that they are the oldest supracrustal rocks in the world. Our geochronological and geological studies show the Uivak Gneiss is quite varied in lithology and age from 3.6 to >3.9 Ga, and tentatively classified into six groups based on their ages. The oldest Uivak Gneiss components including the Iqaluk Gneiss are present around the SJHS area, and the orthogneisses become young as it is away. The lines of evidence of overprinting of younger granitoid on older granitoid in small outcrops and geological-map scale as well as presence of inherited zircons even in the oldest suite suggests that crustal reworking played an important role on erasing the ancient crusts.

Geodynamic Modeling of the Subduction Zone around the Japanese Islands

Science.gov (United States)

Honda, S.

2017-06-01

In this review, which focuses on our research, we describe the development of the thermomechanical modeling of subduction zones, paying special attention to those around the Japanese Islands. Without a sufficient amount of data and observations, models tended to be conceptual and general. However, the increasing power of computational tools has resulted in simple analytical and numerical models becoming more realistic, by incorporating the mantle flow around the subducting slab. The accumulation of observations and data has made it possible to construct regional models to understand the detail of the subduction processes. Recent advancements in the study of the seismic tomography and geology around the Japanese Islands has enabled new aspects of modeling the mantle processes. A good correlation between the seismic velocity anomalies and the finger-like distribution of volcanoes in northeast Japan has been recognized and small-scale convection (SSC) in the mantle wedge has been proposed to explain such a feature. The spatial and temporal evolution of the distribution of past volcanoes may reflect the characteristics of the flow in the mantle wedge, and points to the possibility of the flip-flopping of the finger-like pattern of the volcano distribution and the migration of volcanic activity from the back-arc side to the trench side. These observations are found to be qualitatively consistent with the results of the SSC model. We have also investigated the expected seismic anisotropy in the presence of SSC. The fast direction of the P-wave anisotropy generally shows the trench-normal direction with a reduced magnitude compared to the case without SSC. An analysis of full 3D seismic anisotropy is necessary to confirm the existence and nature of SSC. The 3D mantle flow around the subduction zone of plate-size scale has been modeled. It was found that the trench-parallel flow in the sub-slab mantle around the northern edge of the Pacific plate at the junction between

Filtered cathodic arc source

International Nuclear Information System (INIS)

Falabella, S.; Sanders, D.M.

1994-01-01

A continuous, cathodic arc ion source coupled to a macro-particle filter capable of separation or elimination of macro-particles from the ion flux produced by cathodic arc discharge is described. The ion source employs an axial magnetic field on a cathode (target) having tapered sides to confine the arc, thereby providing high target material utilization. A bent magnetic field is used to guide the metal ions from the target to the part to be coated. The macro-particle filter consists of two straight solenoids, end to end, but placed at 45 degree to one another, which prevents line-of-sight from the arc spot on the target to the parts to be coated, yet provides a path for ions and electrons to flow, and includes a series of baffles for trapping the macro-particles. 3 figures

Space geodetic observations of repeating slow slip events beneath the Bonin Islands

Science.gov (United States)

Arisa, Deasy; Heki, Kosuke

2017-09-01

The Pacific Plate subducts beneath the Philippine Sea Plate along the Izu-Bonin Trench. We investigated crustal movements at the Bonin Islands, using Global Navigation Satellite System and geodetic Very Long Baseline Interferometry data to reveal how the two plates converge in this subduction zone. These islands are located ∼100 km from the trench, just at the middle between the volcanic arc and the trench, making these islands suitable for detecting signatures of episodic deformation such as slow slip events (SSEs). During 2007-2016, we found five SSEs repeating quasi-periodically with similar displacement patterns. In estimating their fault parameters, we assumed that the fault lies on the prescribed plate boundary, and optimized the size, shape and position of the fault and dislocation vectors. Average fault slip was ∼5 cm, and the average moment magnitude was ∼6.9. We also found one SSE occurred in 2008 updip of the repeating SSE in response to an M6 class interplate earthquake. In spite of the frequent occurrence of SSEs, there is no evidence for long-term strain accumulation in the Bonin Islands that may lead to future megathrust earthquakes. Plate convergence in Mariana-type subduction zones may occur, to a large extent, episodically as repeating SSEs.

Zircon U–Pb geochronology and geochemistry of rhyolitic tuff, granite porphyry and syenogranite in the Lengshuikeng ore district, SE China: Implications for a continental arc to intra-arc rift setting

NARCIS (Netherlands)

Wang, Changming; Zhang, Da; Wu, Gangguo; Xu, Yigan; Carranza, E.J.M; Zhang, Yaoyao; Li, Haikun; Geng, Jianzhen

2013-01-01

SE China is well known for its Mesozoic large-scale granitoid plutons and associated ore deposits. Here, zircon U–Pb geochronological and geochemical data have been used to better constrain the petrogenesis of the igneous rocks associated with porphyry Ag–Pb–Zn deposits in the Lengshuikeng ore

Analogue modeling of arc and backarc deformation in the New Hebrides arc and North Fiji Basin

NARCIS (Netherlands)

Schellart, W. P.; Lister, G. S.; Jessell, M. W.

In most backarc basins, extension is perpendicular to the arc. Thus individual spreading ridges extend approximately parallel to the arc. In the North Fiji Basin, however, several ancient and active spreading ridges strike 70°-90° to the New Hebrides arc. These high-angle spreading ridges relocated

Physical characteristics of welding arc ignition process

Science.gov (United States)

Shi, Linan; Song, Yonglun; Xiao, Tianjiao; Ran, Guowei

2012-07-01

The existing research of welding arc mainly focuses on the stable combustion state and the research on the mechanism of welding arc ignition process is quite lack. The tungsten inert gas(TIG) touch arc ignition process is observed via a high speed camera and the high time resolution spectral diagnosis system. The changing phenomenon of main ionized element provided the electrons in the arc ignition is found. The metallic element is the main contributor to provide the electrons at the beginning of the discharging, and then the excitated shielding gas element replaces the function of the metallic element. The electron density during the period of the arc ignition is calculated by the Stark-broadened lines of Hα. Through the discussion with the repeatability in relaxation phenomenon, the statistical regularity in the arc ignition process is analyzed. The similar rules as above are observed through the comparison with the laser-assisted arc ignition experiments and the metal inert gas(MIG) arc ignition experiments. This research is helpful to further understanding on the generation mechanism of welding arc ignition and also has a certain academic and practical significance on enriching the welding physical theoretical foundation and improving the precise monitoring on automatic arc welding process.

Busbar arcs at large fusion magnets: Conductor to feeder tube arcing model experiments with the LONGARC device

Energy Technology Data Exchange (ETDEWEB)

Klimenko, Dmitry, E-mail: dmitry.klimenko@kit.edu; Pasler, Volker

2014-10-15

Highlights: •The LONGARC device was successfully implemented for busbar to feeder tubes arcing model experiments. •Arcing at an ITER busbar inside its feeder tube was simulated in scaled model experiments. •The narrower half tubes imply a slight increase of the arc propagation speed in compare to full tube experiments. •All simulated half tubes experiments show severe damage indicating that the ITER inner feeder tube will not withstand a busbar arc. -- Abstract: Electric arcs moving along the power cables (the so-called busbars) of the toroidal field (TF) coils of ITER may reach and penetrate the cryostat wall. Model experiments with the new LONGARC device continue the VACARC (VACuum ARC) experiments that were initiated to investigate the propagation and destruction mechanisms of busbar arcs in small scale [1]. The experiments are intended to support the development and validation of a numerical model. LONGARC overcomes the space limitations inside VACARC and allows also for advanced 1:3 (vs. ITER full scale) model setups. The LONGARC device and first results are presented below.

Numerical modeling of transferred arc melting bath heating; Modelisation numerique du chauffage de bains par arc transfere

Energy Technology Data Exchange (ETDEWEB)

Bouvier, A. [Electricite de France, 77 - Moret sur Loing (France). Direction des Etudes et Recherches; Trenty, L.; Guillot, J.B. [Ecole Centrale de Paris, Laboratoire EM2C. CNRS, 92 - Chatenay-Malabry (France); Delalondre, C. [Electricite de France (EDF), 78 - Chatou (France). Direction des Etudes et Recherches

1997-12-31

This paper presents the modeling of a transferred electric arc inside a bath of melted metal. After a recall of the context of the study, the problem of the modeling, which involves magnetohydrodynamic coupling inside the arc and the bath, is described. The equations that govern the phenomena inside the arc and the bath are recalled and the approach used for the modeling of the anode region of the arc is explained using a 1-D sub-model. The conditions of connection between arc and bath calculations are explained and calculation results obtained with a 200 kW laboratory furnace geometry are presented. (J.S.) 8 refs.

Momentum equation for arc-driven rail guns

International Nuclear Information System (INIS)

Batteh, J.H.

1984-01-01

In several models of arc-driven rail guns, the rails are assumed to be infinitely high to simplify the calculation of the electromagnetic fields which appear in the momentum equation for the arc. This assumption leads to overestimates of the arc pressures and accelerations by approximately a factor of 2 for typical rail-gun geometries. In this paper, we develop a simple method for modifying the momentum equation to account for the effect of finite-height rails on the performance of the rail gun and the properties of the arc. The modification is based on an integration of the Lorentz force across the arc cross section at each axial location in the arc. Application of this technique suggests that, for typical rail-gun geometries and moderately long arcs, the momentum equation appropriate for infinite-height rails can be retained provided that the magnetic pressure term in the equation is scaled by a factor which depends on the effective inductance of the gun. The analysis also indicates that the magnetic pressure gradient actually changes sign near the arc/projectile boundary because of the magnetic fields associated with the arc current

49 CFR 195.226 - Welding: Arc burns.

Science.gov (United States)

2010-10-01

... 49 Transportation 3 2010-10-01 2010-10-01 false Welding: Arc burns. 195.226 Section 195.226 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... PIPELINE Construction § 195.226 Welding: Arc burns. (a) Each arc burn must be repaired. (b) An arc burn may...

Zircon U-Pb ages and Hf isotopic compositions of neoarchaean granitoids from Karimnagar, Eastern Dharwar craton, Southern India: LA-ICPMS results

International Nuclear Information System (INIS)

Babu, E.V.S.S.K.; Vijaya Kumar, T.; Sreenivas, B.; Khadke, Namrata; Vijaya Gopal, B.; Bhaskar Rao, Y.J.

2015-01-01

The Archaean Dharwar and Bastar cratons of Peninsular India are separated by the NE-SW trending Godavari Graben. This zone is involved in recurrent rifting. It is generally believed that earlier phase of rifting dates back to Mesoproterozoic and the younger phase is related to the deposition of Permo-carboniferous coal-bearing sediments. A belt of high-grade rocks (∼ 150 x 45 km) - the Karimnagar granulite terrane (KGT) along the southern flank of the graben. The KGT comprises high-grade lithologies such as orthopyroxene-bearing quarto-feldspathic gneiss, amphibolite-granulite facies supracrustal belts that include metamorphosed quartz-arenites, pelites, carbonates, iron formation and mafic rocks as well as several zones of migmatite and younger granitoid intrusives. The study presented new LA-ICPMS zircon U-Pb age data for five granitoid (charnockite and granite) samples (KRN-90-24, KRN-90-30, KRN-13-02, KRN-13-03 and KRN-13-05; a closer constraint of the age crystallization of protoliths and high-grade metamorphism of felsic granulites and orthogneisses from the KGT. Hf isotopic compositions were also obtained for selected zircons from two samples (KRN-90-24 and KRN-90-30) using New Wave UP-213 Laser Ablation system coupled to Nu Plasma HR MC-ICPMS to constraint the nature of the felsic protoliths of the charnockite and granite gneisses in the KGT

Geological Structures Appearances and Its Relation to Mechanism of Arc-Continent Collision Northen Alor-Wetar Islands

Directory of Open Access Journals (Sweden)

Subarsyah Subarsyah

2017-02-01

Full Text Available Study area is located in South Banda Basin near the triple junction between Eurasian, Pacific and Indo-Australian Plates. This area is part of back-arc thrusting zone that evolved to compensate convergence between Australia Continent and Banda Arc. Based on seismic section in this area, geological structure analysis is characterized into three distinctive zones. There are Thrust Zone (TZ, Proto Thrust Zone (PTZ and Normal Fault Zone (NFZ. TZ is defined by distribution of numerous of thrust fault, PTZ contains a blind zone or folds instead of thrust fault, and NFZ defined by distribution of numerous normal fault in the upper portion of seismic section. PTZ identified at several seismic section along the bending zone of oceanic crust. The appearances of bending zone will be easily understood by comprehend the driving mechanism of Australia Continent to the Northeast. The bending zone also related to geometry and tectonic stress of collision. Based on this mechanism it was clearly understood why the western end of study area was not identified the bending zone but it probably the initial process of bending. Contradictive to the western end, the eastern part was clearly shown the bending zone that assumed to have the biggest tectonic stress at this moment. Map of structural analysis also explain that PTZ getting narrow towards the west as the indicator of less of tectonic stress.

Carboniferous rifted arcs leading to an archipelago of multiple arcs in the Beishan-Tianshan orogenic collages (NW China)

Science.gov (United States)

Tian, Zhonghua; Xiao, Wenjiao; Windley, Brian F.; Zhang, Ji'en; Zhang, Zhiyong; Song, Dongfang

2017-10-01

The Beishan and East Tianshan Orogenic Collages in the southernmost Central Asian Orogenic Belt (CAOB) record the final stages of evolution of the Paleo-Asian Ocean. These collages and their constituent arcs have an important significance for resolving current controversies regarding their tectonic setting and age, consequent accretionary history of the southern CAOB, and the closure time of the Paleo-Asian Ocean. In this paper, we present our work on the southern Mazongshan arc and the northern Hongyanjing Basin in the Beishan Orogenic Collage (BOC), and our comparison with the Bogda arc and associated basins in the East Tianshan Orogenic Collage. Field relationships indicate that the Pochengshan fault defines the boundary between the arc and basin in the BOC. Volcanic rocks including basalts and rhyolites in the Mazongshan arc have bimodal calc-alkaline characteristics, an enrichment in large ion lithophile elements such as Rb, Ba, and Pb and depletion in high field-strength elements (e.g., Nb and Ta), which were probably developed in a subduction-related tectonic setting. We suggest that these bimodal calc-alkaline volcanic rocks formed in rifted arcs instead of post-orogenic rifts with mantle plume inputs. By making detailed geochemical comparisons between the Mazongshan arc and the Bogda arc to the west, we further propose that they are similar and both formed in arc rifts, and helped generate a Carboniferous archipelago of multiple arcs in the southern Paleo-Asian Ocean. These data and ideas enable us to postulate a new model for the tectonic evolution of the southern CAOB.

Investigations Of A Pulsed Cathodic Vacuum Arc

Science.gov (United States)

Oates, T. W. H.; Pigott, J.; Denniss, P.; Mckenzie, D. R.; Bilek, M. M. M.

2003-06-01

Cathodic vacuum arcs are well established as a method for producing thin films for coatings and as a source of metal ions. Research into DC vacuum arcs has been going on for over ten years in the School of Physics at the University of Sydney. Recently a project was undertaken in the school to design and build a pulsed CVA for use in the investigation of plasma sheaths and plasma immersion ion implantation. Pulsed cathodic vacuum arcs generally have a higher current and plasma density and also provide a more stable and reproducible plasma density than their DC counterparts. Additionally it has been shown that if a high repetition frequency can be established the deposition rate of pulsed arcs is equal to or greater than that of DC arcs with a concomitant reduction in the rate of macro-particle formation. We present here results of our investigations into the building of a center-triggered pulsed cathodic vacuum arc. The design of the power supply and trigger mechanism and the geometry of the anode and cathode are examined. Observations of type I and II arc spots using a CCD camera, and cathode spot velocity dependence on arc current will be presented. The role of retrograde motion in a high current pulsed arc is discussed.

Investigations Of A Pulsed Cathodic Vacuum Arc

International Nuclear Information System (INIS)

Oates, T.W.H.; Pigott, J.; Denniss, P.; Mckenzie, D.R.; Bilek, M.M.M.

2003-01-01

Cathodic vacuum arcs are well established as a method for producing thin films for coatings and as a source of metal ions. Research into DC vacuum arcs has been going on for over ten years in the School of Physics at the University of Sydney. Recently a project was undertaken in the school to design and build a pulsed CVA for use in the investigation of plasma sheaths and plasma immersion ion implantation. Pulsed cathodic vacuum arcs generally have a higher current and plasma density and also provide a more stable and reproducible plasma density than their DC counterparts. Additionally it has been shown that if a high repetition frequency can be established the deposition rate of pulsed arcs is equal to or greater than that of DC arcs with a concomitant reduction in the rate of macro-particle formation. We present here results of our investigations into the building of a center-triggered pulsed cathodic vacuum arc. The design of the power supply and trigger mechanism and the geometry of the anode and cathode are examined. Observations of type I and II arc spots using a CCD camera, and cathode spot velocity dependence on arc current will be presented. The role of retrograde motion in a high current pulsed arc is discussed

Evaluating optical hazards from plasma arc cutting.

Science.gov (United States)

Glassford, Eric; Burr, Gregory

2018-01-01

The Health Hazard Evaluation Program of the National Institute for Occupational Safety and Health evaluated a steel building materials manufacturer. The employer requested the evaluation because of concerns about optical radiation hazards from a plasma arc cutting system and the need to clarify eye protection requirements for plasma operators, other employees, and visitors. The strength of the ultraviolet radiation, visible radiation (light), and infrared radiation generated by the plasma arc cutter was measured at various distances from the source and at different operating amperages. Investigators also observed employees performing the plasma arc cutting. Optical radiation above safe levels for the unprotected eyes in the ultraviolet-C, ultraviolet-B, and visible light ranges were found during plasma arc cutting. In contrast, infrared and ultraviolet-A radiation levels during plasma arc cutting were similar to background levels. The highest non-ionizing radiation exposures occurred when no welding curtains were used. A plasma arc welding curtain in place did not eliminate optical radiation hazards to the plasma arc operator or to nearby employees. In most instances, the measured intensities for visible light, UV-C, and UV-B resulted in welding shade lens numbers that were lower than those stipulated in the OSHA Filter Lenses for Protection Against Radiant Energy table in 29 CFR 1910.133(a)(5). [1] Investigators recommended using a welding curtain that enclosed the plasma arc, posting optical radiation warning signs in the plasma arc cutter area, installing audible or visual warning cues when the plasma arc cutter was operating, and using welding shades that covered the plasma arc cutter operator's face to protect skin from ultraviolet radiation hazards.

Poster - 42: TB - ARC: A Total Body photon ARC technique using a commercially available linac

Energy Technology Data Exchange (ETDEWEB)

Evans, Michael D. C.; Ruo, Russell; Patrocinio, Horacio J.; Poon, Emily; Freeman, Carolyn; Hijal, Tarek; Parker, William [McGill University Health Centre (Canada)

2016-08-15

We have developed a total body photon irradiation technique using multiple overlapping open field arcs (TB-ARC). This simple technique uses predetermined arc-weights, with MUs calculated as a function of prescription depth only. Patients lie on a stretcher, in the prone/supine treatment position with AP/PA arcs. This treatment position has many advantages including ease of delivery (especially for tall, pediatric or compromised patients), dose uniformity, simplicity for organ shielding, and imaging capabilities. Using a Varian TrueBeam linac, 14 arcs using 40×40 cm{sup 2} 6 MV open photon beams, sweeping across 10 degrees each, complete a 140 degree arc. The nominal SSD at zero degrees is 200 cm. Arcs at the sweep limits (+/− 70 degrees) are differentially weighted and deliver a dose within 10% of the prescription on central axis, at a depth of 10 cm over a superior-inferior length of 275 cm. CT planning using Varian Eclipse enables dose evaluation. A custom made beam spoiler, consisting of a 2.5 m sheet of polycarbonate (6 mm thick) increases the surface dose from 45% to 90%. This beam spoiler also serves as a support in the event that differential attenuation is required for organs such as lung, heart, liver, kidneys. The geometry of the sweeping beam technique limits organ dose (using varying thicknesses of melting alloy) to about 20% and 40% of prescription at dmax and midplane respectively. Digital imaging with a portable DR cassette enables proper attenuator location prior to treatment.

Investigation and control of dc arc jet instabilities to obtain a self-sustained pulsed laminar arc jet

International Nuclear Information System (INIS)

Krowka, J; Rat, V; Coudert, J F

2013-01-01

The uncontrolled arc plasma instabilities in suspension plasma spraying or solution precursor plasma spraying cause non-homogeneous plasma treatments of material during their flight and also on coatings during their formation. This paper shows that the arc motion in dc plasma torches mainly originates in two main modes of oscillation (Helmholtz and restrike modes). The emphasis is put on the restrike mode in which the time component is extracted after building up and applying a numerical filter to raw arc voltage signals. The dependence of re-arcing events on experimental parameters is analysed in the frame of a phenomenological restrike model. It is shown that when the restrike frequency reaches the Helmholtz one, both modes are locked together and a pulsed arc jet is generated. (paper)

Geochronology Intermediary Laboratory implantation at the Rio Grande do Norte Federal University: the dating of the Serrinha Granitoid (RN) and the correlate Brasiliana extensional deformation; Implantacao do Laboratorio Intermediario de Geocronologia na UFRN: a datacao do granitoide de Serrinha (RN) e da deformacao extensional brasiliana correlata

Energy Technology Data Exchange (ETDEWEB)

Macedo, Maria Helena F.; Sa, Emanuel F. Jardim de; Souza, Zorano S. [Pernambuco Univ., Recife, PE (Brazil). Nucleo de Pesquisa em Geodinamica e Geofisica; Mendes, Franklin S. [Pernambuco Univ., Recife, PE (Brazil). Curso de Quimica; Ramalho, Karlos A.C. [Pernambuco Univ., Recife, PE (Brazil). Curso de Geologia

1997-12-31

The article describes the activities developed by the Geochronology Intermediary Laboratory at the Federal University of the Rio Grande do Norte, a Brazilian university, where there were the preoccupation of establishing strategies for a geochronological development. It relates the Rubidium-Strontium (Rb/Sr) and Samarium-Neodymium (Sm/Nd) methods, describing the analysis realized in these methodologies. Afterward, it presents the geological and petrographic situation of the Granitoide de Serrinha, located at Rio Grande do Norte State, Brazil and its geochronological data 8 refs., 2 figs.

Rapid arc - clinical rationale and results

International Nuclear Information System (INIS)

Cozzi, Lucca

2008-01-01

The presentation will focus on the background of Intensity modulation volumetric arc therapy Rapid Arc from Varian Medical Systems aiming to highlight the technical and clinical rational also from an historical perspective to the founding pillars of fast delivery with a minimum number of arcs and a minimum number of monitor units

Prototype arc saw design and cutting trials

International Nuclear Information System (INIS)

Allison, G.S.

1980-09-01

A program was initiated to develop the arc saw as a tool capable of removing the end fittings from spent nuclear fuel bundles. A special arc saw for this purpose was designed, installed at the Pacific Northwest Laboratory and satisfactorily operated to remove end fittings from simulated, nonradioactive fuel bundles. The design of the arc saw included consideration of the cutting environment, power supply size, control equipment, and work piece size. Several simulated fuel bundles were cut to demonstrate that the arc saw met design specifications. Although the arc saw development program was curtailed before significant performance data could be collected, tests indicate that the arc saw is a good means of cropping spent fuel bundles and is well suited to remote operation and maintenance

Influence of a transverse magnetic field on arc root movements in a dc plasma torch: Diamagnetic effect of arc column

International Nuclear Information System (INIS)

Kim, Keun Su

2009-01-01

The effect of a transverse magnetic field on the anodic arc root movement inside a dc plasma torch has been investigated. The arc voltage fluctuation, which represents the degree of the arc instability, was reduced to 28.6% of the original value and the high frequency components in the voltage signal also decreased in their magnitudes. The inherent arc instability in a dc thermal plasma torch seems to be suppressed by a diamagnetic effect of the arc column. Furthermore, the measured voltage wave forms indicated that the arc root attachment mode would be controllable by a transverse magnetic field

Arc modeling for welding analysis

International Nuclear Information System (INIS)

Glickstein, S.S.

1978-04-01

A one-dimensional model of the welding arc that considers heat generation by the Joule effect and heat losses by radiation and conduction has been used to study the effects of various gases and gas mixtures currently employed for welding applications. Minor additions of low ionization potential impurities to these gases are shown to significantly perturb the electrical properties of the parent gas causing gross changes in the radial temperature distribution of the arc discharge. Such changes are reflected in the current density distribution and ultimately in the input energy distribution to the weldment. The result is observed as a variation in weld penetration. Recently published experiments and analyses of welding arcs are also evaluated and shown to contain erroneous data and results. Contrary to previous beliefs, the inclusion of a radiation loss term in the basic energy balance equation is important and cannot be considered as negligible in an argon arc at temperatures as low as 10,000 0 K. The one-dimensional analysis of the welding arc as well as the evaluation of these earlier published reports helps to explain the effects of various gases used for welding, improves our understanding of the physics of the welding arc, and provides a stepping stone for a more elaborate model which can be applied to help optimize welding parameters

Low voltage arc formation in railguns

Science.gov (United States)

Hawke, R.S.

1985-08-05

A low voltage plasma arc is first established across the rails behind the projectile by switching a low voltage high current source across the rails to establish a plasma arc by vaporizing a fuse mounted on the back of the projectile, maintaining the voltage across the rails below the railgun breakdown voltage to prevent arc formation ahead of the projectile. After the plasma arc has been formed behind the projectile a discriminator switches the full energy bank across the rails to accelerate the projectile. A gas gun injector may be utilized to inject a projectile into the breech of a railgun. The invention permits the use of a gas gun or gun powder injector and an evacuated barrel without the risk of spurious arc formation in front of the projectile.

Neoarchean granite-greenstone belts and related ore mineralization in the North China Craton: An overview

Directory of Open Access Journals (Sweden)

Li Tang

2018-05-01

Full Text Available Tectonic processes involving amalgamations of microblocks along zones of ocean closure represented by granite-greenstone belts (GGB were fundamental in building the Earth's early continents. The crustal growth and cratonization of the North China Craton (NCC are correlated to the amalgamation of microblocks welded by 2.75–2.6 Ga and ∼2.5 Ga GGBs. The lithological assemblages in the GGBs are broadly represented by volcano-sedimentary sequences, subduction-collision related granitoids and bimodal volcanic rocks (basalt and dacite interlayered with minor komatiites and calc-alkalic volcanic rocks (basalt, andesite and felsic rock. The geochemical features of meta-basalts in the major GGBs of the NCC display affinity with N-MORB, E-MORB, OIB and calc-alkaline basalt, suggesting that the microblocks were separated by oceanic realm. The granitoid rocks display arc signature with enrichment of LILE (K, Rb, Sr, Ba and LREE, and depletion of HFSE (Nb, Ta, Th, U, Ti and HREE, and fall in the VAG field. The major mineralization includes Neoarchean BIF-type iron and VMS-type Cu-Zb deposits and these, together with the associated supracrustal rocks possibly formed in back-arc basins or arc-related oceanic slab subduction setting with or without input from mantle plumes. The 2.75–2.60 Ga TTG rocks, komatiites, meta-basalts and metasedimentary rocks in the Yanlingguan GGB are correlated to the upwelling mantle plume with eruption close to the continental margin within an ocean basin. The volcano-sedimentary rocks and granitoid rocks in the late Neoarchean GGBs display formation ages of 2.60–2.48 Ga, followed by metamorphism at 2.52–2.47 Ga, corresponding to a typical modern-style subduction-collision system operating at the dawn of Proterozoic. The late Neoarchean komatiite (Dongwufenzi GGB, sanukitoid (Dongwufenzi GGB and Western Shandong GGB, BIF (Zunhua GGB and VMS deposit (Hongtoushan-Qingyuan-Helong GGB have closer connection to a combined

View of an intact oceanic arc, from surficial to mesozonal levels: Cretaceous Alisitos arc, Baja California

Science.gov (United States)

Busby, Cathy; Fackler Adams, Benjamin; Mattinson, James; Deoreo, Stephen

2006-01-01

The Alisitos arc is an approximately 300 × 30 km oceanic arc terrane that lies in the western wall of the Peninsular Ranges batholith south of the modern Agua Blanca fault zone in Baja California. We have completed detailed mapping and dating of a 50 × 30 km segment of this terrane in the El Rosario to Mission San Fernando areas, as well as reconnaissance mapping and dating in the next 50 × 30 km segment to the north, in the San Quintin area. We recognize two evolutionary phases in this part of the arc terrane: (I) extensional oceanic arc, characterized by intermediate to silicic explosive and effusive volcanism, culminating in caldera-forming silicic ignimbrite eruptions at the onset of arc rifting, and (II) rifted oceanic arc, characterized by mafic effusive and hydroclastic rocks and abundant dike swarms. Two types of units are widespread enough to permit tentative stratigraphic correlation across much of this 100-km-long segment of the arc: a welded dacite ignimbrite (tuff of Aguajito), and a deepwater debris-avalanche deposit. New U-Pb zircon data from the volcanic and plutonic rocks of both phases indicate that the entire 4000-m-thick section accumulated in about 1.5 MY, at 111-110 MY. Southwestern North American sources for two zircon grains with Proterozoic 206Pb / 207Pb ages support the interpretation that the oceanic arc fringed North America rather than representing an exotic terrane. The excellent preservation and exposure of the Alistos arc terrane makes it ideal for three-dimensional study of the structural, stratigraphic and intrusive history of an oceanic arc terrane. The segment mapped and dated in detail has a central major subaerial edifice, flanked by a down-faulted deepwater marine basin to the north, and a volcano-bounded shallow-water marine basin to the south. The rugged down-faulted flank of the edifice produced mass wasting, plumbed large-volume eruptions to the surface, and caused pyroclastic flows to disintegrate into turbulent

The Abundance of Large Arcs From CLASH

Science.gov (United States)

Xu, Bingxiao; Postman, Marc; Meneghetti, Massimo; Coe, Dan A.; Clash Team

2015-01-01

We have developed an automated arc-finding algorithm to perform a rigorous comparison of the observed and simulated abundance of large lensed background galaxies (a.k.a arcs). We use images from the CLASH program to derive our observed arc abundance. Simulated CLASH images are created by performing ray tracing through mock clusters generated by the N-body simulation calibrated tool -- MOKA, and N-body/hydrodynamic simulations -- MUSIC, over the same mass and redshift range as the CLASH X-ray selected sample. We derive a lensing efficiency of 15 ± 3 arcs per cluster for the X-ray selected CLASH sample and 4 ± 2 arcs per cluster for the simulated sample. The marginally significant difference (3.0 σ) between the results for the observations and the simulations can be explained by the systematically smaller area with magnification larger than 3 (by a factor of ˜4) in both MOKA and MUSIC mass models relative to those derived from the CLASH data. Accounting for this difference brings the observed and simulated arc statistics into full agreement. We find that the source redshift distribution does not have big impact on the arc abundance but the arc abundance is very sensitive to the concentration of the dark matter halos. Our results suggest that the solution to the "arc statistics problem" lies primarily in matching the cluster dark matter distribution.

Distribution of auroral arcs during quiet geomagnetic conditions

International Nuclear Information System (INIS)

Lassen, K.; Danielsen, C.

1989-01-01

Auroral arcs observed from the Greenland all-sky camera network during quiet intervals (AE 500 eV) and a poleward, low-energy part. Previous studies have shown that the arc pattern is composed of two subpatterns, too, the polar cap are pattern and the oval arc pattern. It is demonstrated that the polar cap arc pattern is situated in the poleward, low-energy part of the precipitation belt, connected to the low-latitude boundary layer, whereas the oval arc pattern is in the equatorial higher energy belt, connected to the plasma sheet. The dividing line between the two arc patterns is associated with the boundary of trapped ≥ 40-keV electrons. The designation polar cap arc pattern is shown to be ambiguous, wherefore it is proposed to replace it by the term high-latitude arc pattern

Glass inclusions in volcanic rocks in the Okinawa Trough back-arc basin: constraints on magma genesis and evolution

Institute of Scientific and Technical Information of China (English)

无

2001-01-01

The major elemnt compositions of glass inclusions in plagioclase and pyroxene phenocrysts of basalt and pumice in the Okinawa Trough back-arc basin are determined by electron microprobe. The results indicate that basalt and pumice are cognate and respectively represent the proluots at early stages of mgmtism and at late stage of crystal fractionation. The initial magrma in the trough is rich in H2O. The variation of H2O content in magma may play an important role in the magma evolution. Plagioclase is the mineral crystallized throughout the whole magrmatic process and accumulates in the zoned magma chamber. From these features it can he inferred that the initial magma in the Okinawa Trough, whose opening began in recent years, is serious ly affected by fluid or other materials carried by subducting slab and the geocbemical feature of volcanic rocks is in some degree similar to that of lavas in island-arc environments.

Study of gliding arc discharge plasma

International Nuclear Information System (INIS)

Yang Chi; Lin Lie; Wu Bin

2006-01-01

The electric parameters change during discharge is studied and the relationship between non-equilibrium degree and parameters is discussed for gliding arc discharges. Using two-channel model, the rules of arc moving due to effect of the airflow is simulated. The numerical simulation results can help analyzing the generation mechanism of gliding arc non-equilibrium plasma. (authors)

Microstructural Study on Oxygen Permeated Arc Beads

Directory of Open Access Journals (Sweden)

Kuan-Heng Liu

2015-01-01

Full Text Available We simulated short circuit of loaded copper wire at ambient atmosphere and successfully identified various phases of the arc bead. A cuprous oxide flake was formed on the surface of the arc bead in the rapid solidification process, and there were two microstructural constituents, namely, Cu-κ eutectic structure and solutal dendrites. Due to the arc bead formed at atmosphere during the local equilibrium solidification process, the phase of arc bead has segregated to the cuprous oxide flake, Cu-κ eutectic, and Cu phase solutal dendrites, which are the fingerprints of the arc bead permeated by oxygen.

A cryptic Early Palaeozoic event in the Narcea Antiform? 40Ar/39Ar amphibole data in the Puente de Selce granitoid

OpenAIRE

Gutiérrez Alonso, Gabriel; Fernández Suárez, J.; Keppie, J. D.; Ortega Rivera, M. A.; Lee, J. K. W.; Murphy, J. B.

2005-01-01

Las edades 40Ar/39Ar obtenidas a partir de anfíboles del granitoide Neoproterozoico de Puente de Selce, localizado en el Antiforme del Narcea junto con la existencia de fábricas de deformación relictas generadas en condiciones de media-alta temperatura en las mismas rocas puede ser interpretada como debida a un evento críptico de edad Paleozoico Inferior fuertemente retrabajado durante la deformación varisca. La naturaleza y la cinemática de este posible evento no pueden precisars...

Arc generation from sputtering plasma-dielectric inclusion interactions

International Nuclear Information System (INIS)

Wickersham, C.E. Jr.; Poole, J.E.; Fan, J.S.

2002-01-01

Arcing during sputter deposition and etching is a significant cause of particle defect generation during device fabrication. In this article we report on the effect of aluminum oxide inclusion size, shape, and orientation on the propensity for arcing during sputtering of aluminum targets. The size, shape, and orientation of a dielectric inclusion plays a major role in determining the propensity for arcing and macroparticle emission. In previous studies we found that there is a critical inclusion size required for arcing to occur. In this article we used high-speed videos, electric arc detection, and measurements of particle defect density on wafers to study the effect of Al 2 O 3 inclusion size, shape, and orientation on arc rate, intensity, and silicon wafer particle defect density. We found that the cross-sectional area of the inclusion exposed to the sputtering plasma is the critical parameter that determines the arc rate and rate of macroparticle emission. Analysis of the arc rate, particle defect density, and the intensity of the optical emission from the arcing plasma indicates that the critical aluminum oxide inclusion area for arcing is 0.22±0.1 mm2 when the sputtering plasma sheath dark-space λ d , is 0.51 mm. Inclusions with areas greater than this critical value readily induce arcing and macroparticle ejection during sputtering. Inclusions below this critical size do not cause arcing or macroparticle ejection. When the inclusion major axis is longer than 2λ d and lies perpendicular to the sputter erosion track tangent, the arcing activity increases significantly over the case where the inclusion major axis lies parallel to the erosion track tangent

Comparison study of intensity modulated arc therapy using single or multiple arcs to intensity modulated radiation therapy for high-risk prostate cancer

International Nuclear Information System (INIS)

Ashamalla, Hani; Tejwani, Ajay; Parameritis, Loannis; Swamy, Uma; Luo, Pei Ching; Guirguis, Adel; Lavaf, Amir

2013-01-01

Intensity modulated arc therapy (IMAT) is a form of intensity modulated radiation therapy (IMRT) that delivers dose in single or multiple arcs. We compared IMRT plans versus single-arc field (1ARC) and multi-arc fields (3ARC) IMAT plans in high-risk prostate cancer. Sixteen patients were studied. Prostate (PTV P ), right pelvic (PTV RtLN ) and left pelvic lymph nodes (PTV LtLN ), and organs at risk were contoured. PTVP, PTV RtLN , and PTV LtLN received 50.40 Gy followed by a boost to PTV B of 28.80 Gy. Three plans were per patient generated: IMRT, 1ARC, and 3ARC. We recorded the dose to the PTV, the mean dose (D MEAN ) to the organs at risk, and volume covered by the 50% isodose. Efficiency was evaluated by monitor units (MU) and beam on time (BOT). Conformity index (CI), Paddick gradient index, and homogeneity index (HI) were also calculated. Average Radiation Therapy Oncology Group CI was 1.17, 1.20, and 1.15 for IMRT, 1ARC, and 3ARC, respectively. The plans' HI were within 1% of each other. The D MEAN of bladder was within 2% of each other. The rectum D MEAN in IMRT plans was 10% lower dose than the arc plans (p < 0.0001). The GI of the 3ARC was superior to IMRT by 27.4% (p = 0.006). The average MU was highest in the IMRT plans (1686) versus 1ARC (575) versus 3ARC (1079). The average BOT was 6 minutes for IMRT compared to 1.3 and 2.9 for 1ARC and 3ARC IMAT (p < 0.05). For high-risk prostate cancer, IMAT may offer a favorable dose gradient profile, conformity, MU and BOT compared to IMRT.

Arc Heated Scramjet Test Facility

Data.gov (United States)

Federal Laboratory Consortium — The Arc Heated Scramjet Test Facility is an arc heated facility which simulates the true enthalpy of flight over the Mach number range of about 4.7 to 8 for free-jet...

Neoproterozoic alkaline magmatism in Ilha do Cardoso, southeastern coast of Sao Paulo State, Brazil

International Nuclear Information System (INIS)

Weber, Werner; Basei, Miguel A.S.; Siga Junior, Oswaldo; Sato, Kei

2001-01-01

This work focuses on the geology and geochronology of rocks cropping out on Cardoso Island, on the southeastern coast of Sao Paulo State, close to the boundary with Parana State. The island, with an area of about 151 km 2 is a protected area administered by the Forest Institute of the Secretariat for the Environment of the State of Sao Paulo. It is mountainous, with a peak at 814 m, and is covered by dense Atlantic Forest vegetation. The island is made up mainly of an igneous complex with light grey leucocratic, inequigranular, medium to coarse-grained syenites. The Tres Irmaos Syenite (STI), composed of pyroxene, hornblende, and perthitic to mesoperthitic microcline, predominates has magmatic flow structures, and it cut by the pinkish grey, leucocratic medium-grained Cambriu alkali-feldspar granites (GC). Geochemical analysis of STI and GC demonstrate their metaluminous alkaline nature and late orogenic to anorogenic character. The bodies formed between 620 and 570 Ma according to U-Pb dating of zircons and cooled between 597 and 531 Ma (K-Ar in amphiboles). Whole rock Sm-Nd analyses yield Meso- and Paleoproterozoic TDM ages (1,500 - 2,200 Ma). A belt of low-grade metasedimentary rocks occurs in the northern part of the island. Quartz schist, quartz-mica schist and mica-quartz schist, often-containing andalusite and cordierite, predominate. Geochemical and geochronological data suggest that the sources of the metasediments were continental arc andesites of whose protoliths separated from the mantle between 1,800 and 2,200 Ma during the Paleoproterozoic. These metasediments probably continue on the continent in the Taquari region and extend southwards in narrow strips between the granitoids of the Paranagua Domain. (author)

Various Characteristics of Electromagnetic Contactor when Arc Discharge are Generated only Make Arc(Researches and Overseas Activities)--(Reports of Overseas Activities)

OpenAIRE

Kiyoshi, Yoshida

2017-01-01

Experiments are carried out to clarify the influence on the current and voltage for various characteristics.A small electromagnetic contactor that has two contacts is used.The arc discharge with only a make arc is generated and various characteristics are measured.Source voltage is set to 100V DC, closed contacts currents are changed from 10A 20A and 30A.From the waveforms, the arc duration time and the bounce time are read out.Arc energy is calculated from the arc voltage and arc current.The...

Optimal partial-arcs in VMAT treatment planning

International Nuclear Information System (INIS)

Wala, Jeremiah; Salari, Ehsan; Chen Wei; Craft, David

2012-01-01

We present a method for improving the delivery efficiency of VMAT by extending the recently published VMAT treatment planning algorithm vmerge to automatically generate optimal partial-arc plans. A high-quality initial plan is created by solving a convex multicriteria optimization problem using 180 equi-spaced beams. This initial plan is used to form a set of dose constraints, and a set of partial-arc plans is created by searching the space of all possible partial-arc plans that satisfy these constraints. For each partial-arc, an iterative fluence map merging and sequencing algorithm (vmerge) is used to improve the delivery efficiency. Merging continues as long as the dose quality is maintained above a user-defined threshold. The final plan is selected as the partial-arc with the lowest treatment time. The complete algorithm is called pmerge. Partial-arc plans are created using pmerge for a lung, liver and prostate case, with final treatment times of 127, 245 and 147 s. Treatment times using full arcs with vmerge are 211, 357 and 178 s. The mean doses to the critical structures for the vmerge and pmerge plans are kept within 5% of those in the initial plan, and the target volume covered by the prescription isodose is maintained above 98% for the pmerge and vmerge plans. Additionally, we find that the angular distribution of fluence in the initial plans is predictive of the start and end angles of the optimal partial-arc. We conclude that VMAT delivery efficiency can be improved by employing partial-arcs without compromising dose quality, and that partial-arcs are most applicable to cases with non-centralized targets. (paper)

Circular arc structures

KAUST Repository

Bo, Pengbo

2011-07-01

The most important guiding principle in computational methods for freeform architecture is the balance between cost efficiency on the one hand, and adherence to the design intent on the other. Key issues are the simplicity of supporting and connecting elements as well as repetition of costly parts. This paper proposes so-called circular arc structures as a means to faithfully realize freeform designs without giving up smooth appearance. In contrast to non-smooth meshes with straight edges where geometric complexity is concentrated in the nodes, we stay with smooth surfaces and rather distribute complexity in a uniform way by allowing edges in the shape of circular arcs. We are able to achieve the simplest possible shape of nodes without interfering with known panel optimization algorithms. We study remarkable special cases of circular arc structures which possess simple supporting elements or repetitive edges, we present the first global approximation method for principal patches, and we show an extension to volumetric structures for truly threedimensional designs. © 2011 ACM.

Letter to the Editor on 'Single-Arc IMRT?'.

Science.gov (United States)

Otto, Karl

2009-04-21

In the note 'Single Arc IMRT?' (Bortfeld and Webb 2009 Phys. Med. Biol. 54 N9-20), Bortfeld and Webb present a theoretical investigation of static gantry IMRT (S-IMRT), single-arc IMRT and tomotherapy. Based on their assumptions they conclude that single-arc IMRT is inherently limited in treating complex cases without compromising delivery efficiency. Here we present an expansion of their work based on the capabilities of the Varian RapidArc single-arc IMRT system. Using the same theoretical framework we derive clinically deliverable single-arc IMRT plans based on these specific capabilities. In particular, we consider the range of leaf motion, the ability to rapidly and continuously vary the dose rate and the choice of collimator angle used for delivery. In contrast to the results of Bortfeld and Webb, our results show that single-arc IMRT plans can be generated that closely match the theoretical optimum. The disparity in the results of each investigation emphasizes that the capabilities of the delivery system, along with the ability of the optimization algorithm to exploit those capabilities, are of particular importance in single-arc IMRT. We conclude that, given the capabilities available with the RapidArc system, single-arc IMRT can produce complex treatment plans that are delivered efficiently (in approximately 2 min).

The characteristic of twin-electrode TIG coupling arc pressure

International Nuclear Information System (INIS)

Leng Xuesong; Zhang Guangjun; Wu Lin

2006-01-01

The coupling arc of twin-electrode TIG (T-TIG) is a particular kind of arc, which is achieved through the coupling of two arcs generated from two insulated electrodes in the same welding torch. It is therefore different from the single arc of conventional TIG in its physical characteristics. This paper studies the distribution of T-TIG coupling arc pressure, and analyses the influences of welding current, arc length, the distance between electrode tips and electrode shape upon arc pressure on the basis of experiment. It is expected that the T-TIG welding method can be applied in high efficiency welding according to its low arc pressure

Backarc extension, detachments and granitoids in the Aegean, their relations to slab tear and asthenospheric flow

Science.gov (United States)

Jolivet, Laurent; Menant, Armel; Rabillard, Aurélien; Arbaret, Laurent; Augier, Romain; Gumiaux, Charles

2013-04-01

The Cycladic granitoids (Ikaria, Mykonos, Naxos, Kos, Lavrion, Serifos, Tinos) intruded the Aegean crust during a rather short period (17-10 Ma) compared to the much longer Oligo-Miocene crustal thinning phase (35 Ma to the Present). Their geochemical characteristics show that their sources have changed through time and space, with a progressive decreasing component of continental crust contamination with time and from east to west. They all interacted with large-scale detachments, namely the North Cycladic Detachment System (NCDS) in the north and the West Cycladic Detachment System (WCDS) in the south. In Mykonos, Naxos, Serifos and Ikaria the plutons are also associated with a high-temperature metamorphic dome of Miocene age. Their intrusion period roughly covers the same time window as the fast clockwise rotation of the western Aegean evidenced by paleomagnetic measurements and they are contemporaneous with a surge of alkaline volcanism in the eastern Aegean that can be related to a slab tear imaged below western Anatolia. The continental crust component in the Middle Miocene Cycladic plutons is not found in the early Miocene plutons of the northern Aegean, like in Kavala and Vrondou. They thus probably record a quite sudden thermal event in the Cyclades that led to the partial melting of the extending deep crust. We propose a model involving slab tear starting at ~17 Ma, fast retreat of the slab west of the tear and southwestward influx of hot asthenospheric material below the Aegean crust, leading to melting of the lower crust. Partial melting of the whole lower crust above the hot asthenospheric flow could explain the flat Moho observed below the Cyclades. The close proximity of plutons with the detachments suggests that their ascent toward the upper crust is favoured by the extreme extension at work there. The first granitoids in the region of the tear (Ikaria) are the richest in crustal component and this component decreases while the crust thins more and

Arc generation from sputtering plasma-dielectric inclusion interactions

CERN Document Server

Wickersham, C E J; Fan, J S

2002-01-01

Arcing during sputter deposition and etching is a significant cause of particle defect generation during device fabrication. In this article we report on the effect of aluminum oxide inclusion size, shape, and orientation on the propensity for arcing during sputtering of aluminum targets. The size, shape, and orientation of a dielectric inclusion plays a major role in determining the propensity for arcing and macroparticle emission. In previous studies we found that there is a critical inclusion size required for arcing to occur. In this article we used high-speed videos, electric arc detection, and measurements of particle defect density on wafers to study the effect of Al sub 2 O sub 3 inclusion size, shape, and orientation on arc rate, intensity, and silicon wafer particle defect density. We found that the cross-sectional area of the inclusion exposed to the sputtering plasma is the critical parameter that determines the arc rate and rate of macroparticle emission. Analysis of the arc rate, particle defect...

Klystron Gun Arcing and Modulator Protection

International Nuclear Information System (INIS)

Gold, S

2004-01-01

The demand for 500 kV and 265 amperes peak to power an X-Band klystron brings up protection issues for klystron faults and the energy dumped into the arc from the modulator. This situation is made worse when more than one klystron will be driven from a single modulator, such as the existing schemes for running two and eight klystrons. High power pulsed klystrons have traditionally be powered by line type modulators which match the driving impedance with the load impedance and therefore current limit at twice the operating current. Multiple klystrons have the added problems of a lower modulator source impedance and added stray capacitance, which converts into appreciable energy at high voltages like 500kV. SLAC has measured the energy dumped into klystron arcs in a single and dual klystron configuration at the 400 to 450 kV level and found interesting characteristics in the arc formation. The author will present measured data from klystron arcs powered from line-type modulators in several configurations. The questions arise as to how the newly designed solid-state modulators, running multiple tubes, will react to a klystron arc and how much energy will be dumped into the arc

The Temporal Dynamics of Arc Expression Regulate Cognitive Flexibility.

Science.gov (United States)

Wall, Mark J; Collins, Dawn R; Chery, Samantha L; Allen, Zachary D; Pastuzyn, Elissa D; George, Arlene J; Nikolova, Viktoriya D; Moy, Sheryl S; Philpot, Benjamin D; Shepherd, Jason D; Müller, Jürgen; Ehlers, Michael D; Mabb, Angela M; Corrêa, Sonia A L

2018-05-24

Neuronal activity regulates the transcription and translation of the immediate-early gene Arc/Arg3.1, a key mediator of synaptic plasticity. Proteasome-dependent degradation of Arc tightly limits its temporal expression, yet the significance of this regulation remains unknown. We disrupted the temporal control of Arc degradation by creating an Arc knockin mouse (ArcKR) where the predominant Arc ubiquitination sites were mutated. ArcKR mice had intact spatial learning but showed specific deficits in selecting an optimal strategy during reversal learning. This cognitive inflexibility was coupled to changes in Arc mRNA and protein expression resulting in a reduced threshold to induce mGluR-LTD and enhanced mGluR-LTD amplitude. These findings show that the abnormal persistence of Arc protein limits the dynamic range of Arc signaling pathways specifically during reversal learning. Our work illuminates how the precise temporal control of activity-dependent molecules, such as Arc, regulates synaptic plasticity and is crucial for cognition. Copyright © 2018 The Authors. Published by Elsevier Inc. All rights reserved.

Thermal and exhumation history of Sakhalin Island (Russia) constrained by apatite U-Pb and fission track thermochronology

Science.gov (United States)

Glorie, Stijn; Alexandrov, Igor; Nixon, Angus; Jepson, Gilby; Gillespie, Jack; Jahn, Bor-Ming

2017-08-01

Sakhalin Island represents a key locality to study the tectonic evolution of the western Pacific. The island is located at the Amur-Okhotsk plate margin and records a complex thermotectonic history. Apatite double dating (U-Pb and fission track) and thermal history modelling were applied to three late Eocene granitoid massifs within central and southern Sakhalin: the Aniva, Okhotsk and Langeri complexes. Apatite U-Pb results yield consistent late Eocene (∼40-37 Ma) ages, suggesting rapid post-magmatic cooling. Apatite fission track results reveal bimodal age distributions with late Eocene - early Oligocene (∼38-33 Ma) and early Miocene (∼20-17 Ma) age populations that can be correlated with variations in Uranium and Chlorine concentrations. Thermal history modelling translates the AFT age bimodality into two-phase cooling histories. The timing of the early cooling phase (∼38-33 Ma) corresponds with the apatite U-Pb ages, indicating rapid cooling to at least ∼100 °C during the late Oligocene. The second cooling phase at ∼20-17 Ma cooled the samples to near-surface temperatures. Both cooling phases correspond with regional unconformities and subsequent accelerations in sedimentation rate, suggesting that cooling was a response to rapid exhumation. In addition, our data suggests that the studied terranes record differential exhumation with respect to the structural architecture. The Miocene exhumation pulse is coeval with the timing of transpressional fault displacement and the subsequent opening of the Kuril Basin.

Stability of alternating current gliding arcs

DEFF Research Database (Denmark)

Kusano, Yukihiro; Salewski, Mirko; Leipold, Frank

2014-01-01

on Ohm’s law indicates that the critical length of alternating current (AC) gliding arc discharge columns can be larger than that of a corresponding direct current (DC) gliding arc. This finding is supported by previously published images of AC and DC gliding arcs. Furthermore, the analysis shows......A gliding arc is a quenched plasma that can be operated as a non-thermal plasma at atmospheric pressure and that is thus suitable for large-scale plasma surface treatment. For its practical industrial use the discharge should be extended stably in ambient air. A simple analytical calculation based...... that the critical length can be increased by increasing the AC frequency, decreasing the serial resistance and lowering the gas flow rate. The predicted dependence of gas flow rate on the arc length is experimentally demonstrated. The gap width is varied to study an optimal electrode design, since the extended non...

The next-generation ARC middleware

DEFF Research Database (Denmark)

Appleton, O.; Cameron, D.; Cernak, J.

2010-01-01

The Advanced Resource Connector (ARC) is a light-weight, non-intrusive, simple yet powerful Grid middleware capable of connecting highly heterogeneous computing and storage resources. ARC aims at providing general purpose, flexible, collaborative computing environments suitable for a range of use...

ARC Operations

Science.gov (United States)

coordination on a regular basis. The overall ARC organizational structure is shown below. Organizational Structure Dynamics and Control of Vehicles Human Centered Modeling and Simulation High Performance

Approximate entropy—a new statistic to quantify arc and welding process stability in short-circuiting gas metal arc welding

International Nuclear Information System (INIS)

Cao Biao; Xiang Yuanpeng; Lü Xiaoqing; Zeng Min; Huang Shisheng

2008-01-01

Based on the phase state reconstruction of welding current in short-circuiting gas metal arc welding using carbon dioxide as shielding gas, the approximate entropy of welding current as well as its standard deviation has been calculated and analysed to investigate their relation with the stability of electric arc and welding process. The extensive experimental and calculated results show that the approximate entropy of welding current is significantly and positively correlated with arc and welding process stability, whereas its standard deviation is correlated with them negatively. A larger approximate entropy and a smaller standard deviation imply a more stable arc and welding process, and vice versa. As a result, the approximate entropy of welding current promises well in assessing and quantifying the stability of electric arc and welding process in short-circuiting gas metal arc welding

Electric fuses operation, a review: 2. Arcing period

International Nuclear Information System (INIS)

Bussière, W

2012-01-01

In the electric fuse operation the arcing period follows immediately the pre-arcing period depicted in Part 1 (Part 1. Pre-arcing period). The transition between these two operation steps is not fully understood at this time. To simplify the beginning of the arcing period can be identified with the electric arc ignition i.e. with the electrodes voltage drop. The consecutive plasma is of metallic type at the beginning of the arcing period and of metallic plus silica type with varying mixture up to the end of the arcing period. The energy brought by the fault current is withdrawn by means of the interaction between the electric arc and the arc quenching material (usually silica sand) whose morphometric properties influence the properties of the plasma column: composition, thermodynamic properties and transport coefficients of the plasma column depend on the porosity (and other morphometric properties) of the filler. The fuse element erosion also known as burn-back is responsible for the lengthening of the plasma column and the variations of the electric field. The whole of these processes is depicted by means of experimental results or modellings when possible.

METHOD OF CONJUGATED CIRCULAR ARCS TRACING

Directory of Open Access Journals (Sweden)

N. Ageyev Vladimir

2017-01-01

Full Text Available The geometric properties of conjugated circular arcs connecting two points on the plane with set directions of tan- gent vectors are studied in the work. It is shown that pairs of conjugated circular arcs with the same conditions in frontier points create one-parameter set of smooth curves tightly filling all the plane. One of the basic properties of this set is the fact that all coupling points of circular arcs are on the circular curve going through the initially given points. The circle radius depends on the direction of tangent vectors. Any point of the circle curve, named auxiliary in this work, determines a pair of conjugated arcs with given boundary conditions. One more condition of the auxiliary circle curve is that it divides the plane into two parts. The arcs going from the initial point are out of the circle limited by this circle curve and the arcs coming to the final point are inside it. These properties are the basis for the method of conjugated circular arcs tracing pro- posed in this article. The algorithm is rather simple and allows to fulfill all the needed plottings using only the divider and ruler. Two concrete examples are considered. The first one is related to the problem of tracing of a pair of conjugated arcs with the minimal curve jump when going through the coupling point. The second one demonstrates the possibility of trac- ing of the smooth curve going through any three points on the plane under condition that in the initial and final points the directions of tangent vectors are given. The proposed methods of conjugated circular arcs tracing can be applied in solving of a wide variety of problems connected with the tracing of cam contours, for example pattern curves in textile industry or in computer-aided-design systems when programming of looms with numeric control.

A cryptic Early Palaeozoic event in the Nacea Antiform? 40Ar/39Ar amphibole data in the Puente de Selce granitoid

OpenAIRE

Gutiérrez Alonso, Gabriel; Fernández Suárez, Javier; Ortega Rivera, M. A.; Lee, J. k. W.; Murphy, J. B.

2005-01-01

Las edades 40Ar/39Ar obtenidas a partir de anfíboles del granitoide Neoproterozoico de Puente de Selce, localizado en el Antiforme del Narcea junto con la existencia de fábricas de deformación relictas generadas en condiciones de media-alta temperatura en las mismas rocas puede ser interpretada como debida a un evento críptico de edad Paleozoico Inferior fuertemente retrabajado durante la deformación varisca. La naturaleza y la cinemática de este posible evento no pueden precisarse pero si se...

Thermal Arc Spray Overview

Science.gov (United States)

Hafiz Abd Malek, Muhamad; Hayati Saad, Nor; Kiyai Abas, Sunhaji; Mohd Shah, Noriyati

2013-06-01

Usage of protective coating for corrosion protection was on highly demand during the past decade; and thermal spray coating played a major part during that time. In recent years, the thermal arc spray coating becomes a popular coating. Many big players in oil and gas such as PETRONAS, EXXON MOBIL and SHELL in Malaysia tend to use the coating on steel structure as a corrosion protection. Further developments in coating processes, the devices, and raw materials have led to expansion of functional coatings and applications scope from conventional coating to specialized industries. It is widely used because of its ability to withstand high process temperature, offer advantages in efficiency, lower cost and acts as a corrosion protection. Previous research also indicated that the thermal arc spray offers better coating properties compared to other methods of spray. This paper reviews some critical area of thermal spray coating by discussing the process/parameter of thermal arc spray technology and quality control of coating. Coating performance against corrosion, wear and special characteristic of coating are also described. The field application of arc spray technology are demonstrated and reviewed.

Thermal Arc Spray Overview

International Nuclear Information System (INIS)

Malek, Muhamad Hafiz Abd; Saad, Nor Hayati; Abas, Sunhaji Kiyai; Shah, Noriyati Mohd

2013-01-01

Usage of protective coating for corrosion protection was on highly demand during the past decade; and thermal spray coating played a major part during that time. In recent years, the thermal arc spray coating becomes a popular coating. Many big players in oil and gas such as PETRONAS, EXXON MOBIL and SHELL in Malaysia tend to use the coating on steel structure as a corrosion protection. Further developments in coating processes, the devices, and raw materials have led to expansion of functional coatings and applications scope from conventional coating to specialized industries. It is widely used because of its ability to withstand high process temperature, offer advantages in efficiency, lower cost and acts as a corrosion protection. Previous research also indicated that the thermal arc spray offers better coating properties compared to other methods of spray. This paper reviews some critical area of thermal spray coating by discussing the process/parameter of thermal arc spray technology and quality control of coating. Coating performance against corrosion, wear and special characteristic of coating are also described. The field application of arc spray technology are demonstrated and reviewed.

Metal transfer during vacuum consumable arc remelting

International Nuclear Information System (INIS)

Zanner, F.J.

1977-11-01

A description of the vacuum consumable arc remelt process as related to solidification and a review of vacuum arc literature is presented. Metal transfer at arc lengths less than or equal to 3 cm was found to occur when liquid metal spikes hanging from the cathode form a low resistance bridge (drop short) by touching the anode and subsequently rupturing. During the bridge lifetime (0.0003 to 0.020 s) the arc is extinguished and all of the electrical power is directed through the molten bridge. The formation and rupture of these molten metal bridges are confirmed with electrical resistance measurements. At long arc lengths (greater than 10 cm) the spikes separate before touching the anode

The Arabidopsis arc5 and arc6 mutations differentially affect plastid morphology in pavement and guard cells in the leaf epidermis.

Science.gov (United States)

Fujiwara, Makoto T; Yasuzawa, Mana; Kojo, Kei H; Niwa, Yasuo; Abe, Tomoko; Yoshida, Shigeo; Nakano, Takeshi; Itoh, Ryuuichi D

2018-01-01

Chloroplasts, or photosynthetic plastids, multiply by binary fission, forming a homogeneous population in plant cells. In Arabidopsis thaliana, the division apparatus (or division ring) of mesophyll chloroplasts includes an inner envelope transmembrane protein ARC6, a cytoplasmic dynamin-related protein ARC5 (DRP5B), and members of the FtsZ1 and FtsZ2 families of proteins, which co-assemble in the stromal mid-plastid division ring (FtsZ ring). FtsZ ring placement is controlled by several proteins, including a stromal factor MinE (AtMinE1). During leaf mesophyll development, ARC6 and AtMinE1 are necessary for FtsZ ring formation and thus plastid division initiation, while ARC5 is essential for a later stage of plastid division. Here, we examined plastid morphology in leaf epidermal pavement cells (PCs) and stomatal guard cells (GCs) in the arc5 and arc6 mutants using stroma-targeted fluorescent proteins. The arc5 PC plastids were generally a bit larger than those of the wild type, but most had normal shapes and were division-competent, unlike mutant mesophyll chloroplasts. The arc6 PC plastids were heterogeneous in size and shape, including the formation of giant and mini-plastids, plastids with highly developed stromules, and grape-like plastid clusters, which varied on a cell-by-cell basis. Moreover, unique plastid phenotypes for stomatal GCs were observed in both mutants. The arc5 GCs rarely lacked chlorophyll-bearing plastids (chloroplasts), while they accumulated minute chlorophyll-less plastids, whereas most GCs developed wild type-like chloroplasts. The arc6 GCs produced large chloroplasts and/or chlorophyll-less plastids, as previously observed, but unexpectedly, their chloroplasts/plastids exhibited marked morphological variations. We quantitatively analyzed plastid morphology and partitioning in paired GCs from wild-type, arc5, arc6, and atminE1 plants. Collectively, our results support the notion that ARC5 is dispensable in the process of equal division

Electric arc discharge damage to ion thruster grids

Science.gov (United States)

Beebe, D. D.; Nakanishi, S.; Finke, R. C.

1974-01-01

Arcs representative of those occurring between the grids of a mercury ion thruster were simulated. Parameters affecting an arc and the resulting damage were studied. The parameters investigated were arc energy, arc duration, and grid geometry. Arc attenuation techniques were also investigated. Potentially serious damage occurred at all energy levels representative of actual thruster operating conditions. Of the grids tested, the lowest open-area configuration sustained the least damage for given conditions. At a fixed energy level a long duration discharge caused greater damage than a short discharge. Attenuation of arc current using various impedances proved to be effective in reducing arc damage. Faults were also deliberately caused using chips of sputtered materials formed during the operation of an actual thruster. These faults were cleared with no serious grid damage resulting using the principles and methods developed in this study.

On the formation of auroral arcs

International Nuclear Information System (INIS)

Stasiewicz, K.

1984-04-01

A new mechanism for auroral arc formation is presented. The characteristic linear shape of auroral arcs is determined by magnetically connected plasma clouds in the distant equatorial magnetosphere. These clouds originate as high speed plasma beams in the magnetotail and in the solar wind. It is found that the free energy for driving an auroral arc is provided by the difference of pressure between the cloud and the ambient plasma. (author)

Nomenclature of SLC Arc beamline components

International Nuclear Information System (INIS)

Silva, J.; Weng, W.T.

1986-01-01

This note defines I and C formal names for beamline components in the Arc as specified in the TRANSPORT decks ARCN FINAL and ARCS FINAL of June 5, 1985. The formal name consists of three fields: the primary name, the zone and the unit number. The general principles and guidelines are explained in Reference 1. The rationale and the final resolutions of the naming conventions for the Arc are explained

a Revision to the Tectonics of the Flores Back-Arc Thrust Zone, Indonesia?

Science.gov (United States)

Tikku, A. A.

2011-12-01

The Flores and Bali Basins are continental basins in the Flores back-arc thrust zone associated with Eocene subduction of the Indo-Australian plate beneath the Sunda plate followed by Miocene to present-day inversion/thrusting. The basins are east of Java and north of the islands of Bali, Lombok, Sumbawa and Flores in the East Java Sea area of Indonesia. The tectonic interpretation of these basins is based on seismic, bathymetry and gravity data and is also supported by present-day GPS measurements that demonstrate subduction is no longer active across the Flores thrust zone. Current thinking about the area is that the Flores Basin (on the east end of the thrust zone) had the most extension in the back-arc thrust and may be a proto-oceanic basin, though the option of a purely continental extensional basin can not be ruled out. The Bali Basin (on the west end of the thrust zone) is thought to be shallower and have experienced less continental thinning and extension than the Flores Basin. Depth to basement estimates from recently collected marine magnetic data indicate the depth of the Bali Basin may be comparable to the depth of the Flores Basin. Analysis of the marine magnetic data and potential implications of relative plate motions will be presented.

The modelling of an SF6 arc in a supersonic nozzle: II. Current zero behaviour of the nozzle arc

International Nuclear Information System (INIS)

Zhang, Q; Liu, J; Yan, J D; Fang, M T C

2016-01-01

The present work (part II) forms the second part of an investigation into the behaviour of SF 6 nozzle arc. It is concerned with the aerodynamic and electrical behaviour of a transient nozzle arc under a current ramp specified by a rate of current decay (d i /d t ) before current zero and a voltage ramp (d V /d t ) after current zero. The five flow models used in part I [1] for cold gas flow and DC nozzle arcs have been applied to study the transient arc at three stagnation pressures ( P 0 ) and two values of d i /d t for the current ramp, representing a wide range of arcing conditions. An analysis of the physical mechanisms encompassed in each flow model is given with an emphasis on the adequacy of a particular model in describing the rapidly varying arc around current zero. The critical rate of rise of recovery voltage (RRRV) is found computationally and compared with test results of Benenson et al [2]. For transient nozzle arcs, the RRRV is proportional to the square of P 0 , rather than to the square root of P 0 for DC nozzle arcs. The physical mechanisms responsible for the strong dependence of RRRV on P 0 have been investigated. The relative merits of the flow models employed are discussed. (paper)

Arc-continent collision and the formation of continental crust: A new geochemical and isotopic record from the Ordovician Tyrone Igneous Complex, Ireland

Science.gov (United States)

Draut, Amy E.; Clift, Peter D.; Amato, Jeffrey M.; Blusztajn, Jerzy; Schouten, Hans

2009-01-01

Collisions between oceanic island-arc terranes and passive continental margins are thought to have been important in the formation of continental crust throughout much of Earth's history. Magmatic evolution during this stage of the plate-tectonic cycle is evident in several areas of the Ordovician Grampian-Taconic orogen, as we demonstrate in the first detailed geochemical study of the Tyrone Igneous Complex, Ireland. New U-Pb zircon dating yields ages of 493 2 Ma from a primitive mafic intrusion, indicating intra-oceanic subduction in Tremadoc time, and 475 10 Ma from a light rare earth element (LREE)-enriched tonalite intrusion that incorporated Laurentian continental material by early Arenig time (Early Ordovician, Stage 2) during arc-continent collision. Notably, LREE enrichment in volcanism and silicic intrusions of the Tyrone Igneous Complex exceeds that of average Dalradian (Laurentian) continental material that would have been thrust under the colliding forearc and potentially recycled into arc magmatism. This implies that crystal fractionation, in addition to magmatic mixing and assimilation, was important to the formation of new crust in the Grampian-Taconic orogeny. Because similar super-enrichment of orogenic melts occurred elsewhere in the Caledonides in the British Isles and Newfoundland, the addition of new, highly enriched melt to this accreted arc terrane was apparently widespread spatially and temporally. Such super-enrichment of magmatism, especially if accompanied by loss of corresponding lower crustal residues, supports the theory that arc-continent collision plays an important role in altering bulk crustal composition toward typical values for ancient continental crust. ?? 2009 Geological Society of London.

Uranium in accessory sphene from granitoids and its behaviour during mineral's alteration (Muzbekskij pluton at Mogol-Tau, Central Asia)

International Nuclear Information System (INIS)

Simonova, L.I.; Maksimova, I.G.; Nad'yarnykh, V.G.; Voronikhin, V.A.

1982-01-01

Uranium behaviour in accessory spbene and products of its alteration at different stages of granitoid transformation with characteristic association of zirconium-apatite-sphene and magnetite of accessory minerals, is shown. The products of sphene alteration (due to propylitization of granatoids the sphene is replaced by leucoxene) are determined by MS-46 electron probe microanalyzer and MA-1 lazer microanalyzer. Uranium distribution in leucoxene is studied by the method of fragmentary radiography. Leucoxene pseudomorphoses at a high oxygen potential are capable of giving into solution Uranium previously sorbed by leucoxene. This fact should be taken into account when determining source of metal of hydrogenous deposits

Universal correlators for multi-arc complex matrix models

International Nuclear Information System (INIS)

Akemann, G.

1997-01-01

The correlation functions of the multi-arc complex matrix model are shown to be universal for any finite number of arcs. The universality classes are characterized by the support of the eigenvalue density and are conjectured to fall into the same classes as the ones recently found for the Hermitian model. This is explicitly shown to be true for the case of two arcs, apart from the known result for one arc. The basic tool is the iterative solution of the loop equation for the complex matrix model with multiple arcs, which provides all multi-loop correlators up to an arbitrary genus. Explicit results for genus one are given for any number of arcs. The two-arc solution is investigated in detail, including the double-scaling limit. In addition universal expressions for the string susceptibility are given for both the complex and Hermitian model. (orig.)

Electric arc behaviour in dynamic magnetic fields

International Nuclear Information System (INIS)

Put'ko, V.F.

2000-01-01

The behaviour of an electric arc in different time-dependent (dynamic) magnetic fields was investigated. New possibilities were found for spatial and energy stabilisation of a discharge, for intensifying heat exchange, extending the electric arc and distributed control of electric arc plasma. Rotating, alternating and travelling magnetic fields were studied. It was found that under the effect of a relatively low frequency of variations of dynamic magnetic fields (f 1000 Hz) the arc stabilised at the axis of the discharge chamber, the pulsation level decreased and discharge stability increased. The borders between these two arc existence modes were formed by a certain critical field variation frequency the period of which was determined by the heat relaxation time of the discharge. (author)

Numerical simulation of global formation of auroral arcs

International Nuclear Information System (INIS)

Miura, A.; Sato, T.

1980-01-01

Global simulation of auroral arcs is performed, based on the feedback theory of auroral arcs (Sato, 1978), for a three-dimensionally coupled ionosphere-magnetosphere system which includes two pairs of large-scale Birkeland currents, large-scale polar cap electric fields, and a day-night asymmetry of the electron density distribution. Simulation results have shown that auroral arcs are formed in the dark sector of the auroral oval, more preferentially in the evening sector. They usually appear in multiples with a shape elongating in the east-west direction, each arc being a couple of thousand kilometers in length and 10 to 40 km in width. A pair of small-scale, upward and downward, Birkeland currents is associated with each arc, the density of which becomes 10 to 200 μA/m 2 at 110-km height, and the intensity of the associated electrojet reaches 5 to 20 kA. Each arc is strongly polarized in the direction of the large-scale northsouth current so that the electric field inside the arc is reduced considerably from its ambient value. What controls the formation of auroral arcs (growing speed, locations, arc width, etc.) is examined in detail. For example, the arc width becomes sharper, as the bounce time of the Alfven wave decreases. The overall structure of auroras is largely dependent upon the large-scale Birkeland current, the electric field, and the electron density distribution in the auroral oval

Characteristics of Atmospheric Pressure Rotating Gliding Arc Plasmas

Science.gov (United States)

Zhang, Hao; Zhu, Fengsen; Tu, Xin; Bo, Zheng; Cen, Kefa; Li, Xiaodong

2016-05-01

In this work, a novel direct current (DC) atmospheric pressure rotating gliding arc (RGA) plasma reactor has been developed for plasma-assisted chemical reactions. The influence of the gas composition and the gas flow rate on the arc dynamic behaviour and the formation of reactive species in the N2 and air gliding arc plasmas has been investigated by means of electrical signals, high speed photography, and optical emission spectroscopic diagnostics. Compared to conventional gliding arc reactors with knife-shaped electrodes which generally require a high flow rate (e.g., 10-20 L/min) to maintain a long arc length and reasonable plasma discharge zone, in this RGA system, a lower gas flow rate (e.g., 2 L/min) can also generate a larger effective plasma reaction zone with a longer arc length for chemical reactions. Two different motion patterns can be clearly observed in the N2 and air RGA plasmas. The time-resolved arc voltage signals show that three different arc dynamic modes, the arc restrike mode, takeover mode, and combined modes, can be clearly identified in the RGA plasmas. The occurrence of different motion and arc dynamic modes is strongly dependent on the composition of the working gas and gas flow rate. supported by National Natural Science Foundation of China (No. 51576174), the Specialized Research Fund for the Doctoral Program of Higher Education of China (No. 20120101110099) and the Fundamental Research Funds for the Central Universities (No. 2015FZA4011)

Application of gas shielded arc welding and submerged arc welding for fabrication of nuclear reactor vessels

International Nuclear Information System (INIS)

Gehani, M.L.; Rodrigues, W.D.

1976-01-01

The remarkable progress made in the development of knowhow and expertise in the manufacture of equipment for nuclear power plants in India is outlined. Some of the specific advances made in the application of higher efficiency weld processes for fabrication of nuclear reactor vessels and the higher level of quality attained are discussed in detail. Modifications and developments in submerged arc, gas tungsten arc and gas metal arc processes for welding of Calandria which have been a highly challenging and rewarding experience are discussed. Future scope for making the gas metal arc process more economical by using various gas-mixes like Agron + Oxygen, Argon + Carbon Dioxide, Argon + Nitrogen (for Copper Alloys) etc., in various proportions are outlined. Quality and dimensional control exercised in these jobs of high precision are highlighted. (K.B.)

Programming ArcGIS with Python cookbook

CERN Document Server

Pimpler, Eric

2015-01-01

Programming ArcGIS with Python Cookbook, Second Edition, is written for GIS professionals who wish to revolutionize their ArcGIS workflow with Python. Whether you are new to ArcGIS or a seasoned professional, you almost certainly spend time each day performing various geoprocessing tasks. This book will teach you how to use the Python programming language to automate these geoprocessing tasks and make you a more efficient and effective GIS professional.

Electric arc radius and characteristics

International Nuclear Information System (INIS)

Fang, T.M.

1980-01-01

The heat transfer equation of an arc discharge has been solved. The arc is assumed to be a cylinder with negligible axial variation and the dominant heat transfer process is conduction radially inside the column and radiation/convection at the outside edge. The symmetric consideration allows a simple one-dimensional formulation. By taking into account proper variation of the electrical conductivity as function of temperature, the heat balance equation has been solved analytically. The radius of the arc and its current-field characteristics have also been obtained. The conventional results that E approx. I 0 5385 and R approx. I 0 7693 with E being the applied field, I the current, and R the radius of the cylindrical arc, have been proved to be simply limiting cases of our more general characteristics. The results can be applied quite widely including, among others, the neutral beam injection project in nuclear fusion and MHD energy conversion

Studies of hydrogen pellet acceleration by electric arc discharge

International Nuclear Information System (INIS)

Andersen, S.

1986-01-01

A preliminary design for an arc heated gas gun is described. The experimental development of the final design constitutes the final phase in contract work for JET. The gun consist of a cryogenic arc chamber connected to the inlet of a gun barrel. With a dose of H 2 -gas condensed in the arc chamber and a D 2 -pellet punch loaded into the barrel the gun is fired by the ignition of an electrical discharge in the arc chamber. The pellet is accelerated by the exhaust of hot H 2 -gas from the arc chamber and its velocity and acceleration is measured by time-of-flight along and outside the barrel. The pressure development by the arc is monitored by pressure transducers as well in the arc chamber as in the barrel. The performance of the gun is described in terms of arc current and voltage versus time as functions of power supply configuration and H 2 propellant dose. The time behaviour of the propellant pressure in the arc chamber and in the barrel is shown in relation to the arc current. Pellet acceleration and pressure development in the gun barrel for the arc heated gas gun is discussed and compared to results obtained by conventional fast valve acceleration

Arc Motion in an Obliquely Imposed Alternating Magnetic Field

International Nuclear Information System (INIS)

Akiho, R; Takeda, K; Sugimoto, M

2012-01-01

The arc motion is theoretically investigated under an alternating magnetic field imposed obliquely to the arc. The arc is known to oscillate on a 2-D plane when the alternating magnetic field is imposed perpendicularly to the arc. If the alternating magnetic field is imposed obliquely to the arc, then it is expected that the arc oscillates not on the 2-D plane but in a 3-D space. For this study, 3-D simulation was performed on the motion of the plasma gas under an alternating magnetic field crossing obliquely to the arc. It was also assumed that a stream line of the plasma gas represented the arc profile. The momentum equation for the plasma gas was solved together with the continuity equation. Governing parameters for the gas motion are θ (crossing angle), v 0 (initial velocity of the plasma gas), and λ. Parameter λ is defined as λ = (I a B 0 )/Q 0 . Numerical results are reported under different operating conditions such as magnetic flux densities and the angles between the arc and the magnetic flux. If the crossing angle is larger than 4/π, the arc might be extinguished because of the drastic increase of the arc length.

The ArcD1 and ArcD2 arginine/ornithine exchangers encoded in the arginine deiminase (ADI) pathway gene cluster of Lactococcus lactis

NARCIS (Netherlands)

Noens, Elke E E; Kaczmarek, Michał B; Żygo, Monika; Lolkema, Juke S

2015-01-01

The arginine deiminase pathway (ADI) gene cluster in Lactococcus lactis contains two copies of a gene encoding an L-arginine/L-ornithine exchanger, the arcD1 and arcD2 genes. The physiological function of ArcD1 and ArcD2 was studied by deleting the two genes. Deletion of arcD1 resulted in loss of

IODP Expedition 351 Izu-Bonin-Mariana Arc Origins: Preliminary Results

Science.gov (United States)

Ishizuka, O.; Arculus, R. J.; Bogus, K.

2014-12-01

Understanding how subduction zones initiate and continental crust forms in intraoceanic arcs requires knowledge of the inception and evolution of a representative intraoceanic arc, such as the Izu-Bonin-Mariana (IBM) Arc system. This can be obtained by exploring regions adjacent to an arc, where unequivocal pre-arc crust overlain by undisturbed arc-derived materials exists. IODP Exp. 351 (June-July 2014) specifically targeted evidence for the earliest evolution of the IBM system following inception. Site U1438 (4711 m water depth) is located in the Amami Sankaku Basin (ASB), west of the Kyushu-Palau Ridge (KPR), a paleo-IBM arc. Primary objectives of Exp. 351 were: 1) determine the nature of the crust and mantle pre-existing the IBM arc; 2) identify and model the process of subduction initiation and initial arc crust formation; 3) determine the compositional evolution of the IBM arc during the Paleogene; 4) establish geophysical properties of the ASB. Seismic reflection profiles indicate a ~1.3 km thick sediment layer overlying ~5.5 km thick igneous crust, presumed to be oceanic. This igneous crust seemed likely to be the basement of the IBM arc. Four holes were cored at Site U1438 spanning the entire sediment section and into basement. The cored interval comprises 5 units: uppermost Unit I is hemipelagic sediment with intercalated ash layers, presumably recording explosive volcanism mainly from the Ryukyu and Kyushu arcs; Units II and III host a series of volcaniclastic gravity-flow deposits, likely recording the magmatic history of the IBM Arc from arc initiation until 25 Ma; Siliceous pelagic sediment (Unit IV) underlies these deposits with minimal coarse-grained sediment input and may pre-date arc initiation. Sediment-basement contact occurs at 1461 mbsf. A basaltic lava flow section dominantly composed of plagioclase and clinopyroxene with rare chilled margins continues to the bottom of the Site (1611 mbsf). The expedition successfully recovered pre-IBM Arc

An arc detector for neutron crystal structure investigations

Energy Technology Data Exchange (ETDEWEB)

Habib, N [Reactor and Neutron Physics Dept., Nuclear Research Center. AEA, Cairo (Egypt)

1997-12-31

An arc detector for neutron structure investigations of powder crystals using time-of-flight technique is described. In order to enable the measurement of integral intensity from about 1/4 of the Debye-Scherrer ring and for simplicity reasons, the scattering angle 20-90 degree was chosen and a special arc collimator was built. The arc collimator-detector had a divergency of about 20 minutes of arc, and the distance between detector-sample was 64 cm. Four {sup 3} He detectors were fixed on the arc of the collimator. Both efficiency and space sensitivity of the detector were determined using a point neutron source. Results of measurements show that parameters of the arc detector are acceptable for high resolution crystal structure investigations. 6 figs.

Automatic Control Of Length Of Welding Arc

Science.gov (United States)

Iceland, William F.

1991-01-01

Nonlinear relationships among current, voltage, and length stored in electronic memory. Conceptual microprocessor-based control subsystem maintains constant length of welding arc in gas/tungsten arc-welding system, even when welding current varied. Uses feedback of current and voltage from welding arc. Directs motor to set position of torch according to previously measured relationships among current, voltage, and length of arc. Signal paths marked "calibration" or "welding" used during those processes only. Other signal paths used during both processes. Control subsystem added to existing manual or automatic welding system equipped with automatic voltage control.

Spatial Distribution of Field Physico-Chemical Parameters in the Vulcano Island (Italy) Coastal Aquifer: Volcanological and Hydrogeological Implications

OpenAIRE

Paolo Madonia; Giorgio Capasso; Rocco Favara; Salvatore Francofonte; Paolo Tommasi

2015-01-01

Vulcano, the southernmost of the Aeolian island arc (Italy), is characterized by a shallow coastal aquifer resulting from the mixing of seawater, meteoric recharge and volcanogenic fluids. The aquifer has been intensively studied during the last decades, but a comprehensive hydrogeological model has never been developed due to the lack of direct information about the litho-stratigraphic columns of the wells and the depth of water bearing levels. We present and discuss here the ...

Arc discharge characteristics of molten salts used in an MHD generator

International Nuclear Information System (INIS)

Korenaga, Sadayoshi; Mohri, Motoichi.

1981-01-01

The seed arc discharge phenomena in an MHD generator were studied. The behavior of arc was observed, which was generated by using K 2 CO 3 and K 2 SO 4 heated up to 1150 degree C as cathodes and a water-cooled copper as an anode. The generated arcs were classified into 3 types, such as free spot arc (point arc), line emission arc (line arc) and plane arc. The estimated temperature of arc foot was lower than the boiling point of seed material. The relation between arc voltage and arc length and that between arc voltage and arc current were measured. From these data, the potential gradient of arc was obtained. The gradients were same for almost all materials of cathode. The potential drop at cathodes depended remarkably on the kinds of molten salt, and also depended on the shapes of cathodes. The evaporation rate of cathode materials was larger when the cathode potential drop was larger and the arc current was larger. (Kato, T.)

3D Numerical Analysis of the Arc Plasma Behavior in a Submerged DC Electric Arc Furnace for the Production of Fused MgO

International Nuclear Information System (INIS)

Wang Zhen; Wang Ninghui; Li Tie; Cao Yong

2012-01-01

A three dimensional steady-state magnetohydrodynamic model is developed for the arc plasma in a DC submerged electric arc furnace for the production of fused MgO. The arc is generated in a small semi-enclosed space formed by the graphite electrode, the molten bath and unmelted raw materials. The model is first used to solve a similar problem in a steel making furnace, and the calculated results are found to be in good agreement with the published measurements. The behavior of arcs with different arc lengths is also studied in the furnace for MgO production. From the distribution of the arc pressure on the bath surface it is shown that the arc plasma impingement is large enough to cause a crater-like depression on the surface of the MgO bath. The circulation of the high temperature air under the electrode may enhance the arc efficiency, especially for a shorter arc.

Current transfer in dc non-transferred arc plasma torches