Greenhouse and field-based studies on the distribution of dimethoate in cotton and its effect on Tetranychus urticae by drip irrigation.

Science.gov (United States)

He, Jiangtao; Zhou, Lijuan; Yao, Qiang; Liu, Bo; Xu, Hanhong; Huang, Jiguang

2018-01-01

The two-spotted spider mite, Tetranychus urticae Koch is an important pest of cotton. We investigated the efficacy of dimethoate in controlling T. urticae by drip irrigation. Greenhouse and field experiments were carried out to determine the efficacy of dimethoate to T. urticae and the absorption and distribution of dimethoate in cotton. Greenhouse results showed that cotton leaves received higher amounts of dimethoate compared with cotton roots and stems, with higher amounts in young leaves compared with old leaves and cotyledon having the lowest amounts among leaves. Field results showed the efficacy of dimethoate to T. urticae by drip irrigation varied by volume of dripping water, soil pH and dimethoate dosage. Dimethoate applied at 3.00 kg ha -1 with 200 m 3  ha -1 water at weak acidic soil pH (5.70-6.70) through drip irrigation can obtain satisfactory control efficacy (81.49%, 7 days) to T. urticae, without negatively impacting on its natural enemy Neoseiulus cucumeris. The residue of dimethoate in all cotton seed samples were not detectable. These results demonstrate the effectiveness of applying dimethoate by drip irrigation for control of T. urticae on cotton. This knowledge could aid in the applicability of dimethoate by drip irrigation for field management of T. urticae populations. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Upland cotton growth and yield response to timing the initial postplant irrigation

International Nuclear Information System (INIS)

Steger, A.J.; Silvertooth, J.C.; Brown, P.W.

1998-01-01

Cotton (Gossypium spp.) production in arid and semiarid regions depends on well-managed irrigation systems for optimum yield and production efficiency. Water deficit stress early in the growing season can affect the subsequent growth and development of short-season cotton. A 2-yr field study was conducted in southern Arizona to determine the optimum timing of the initial postplant irrigation for a short-season upland cotton variety based on midday leaf water potential (LWP) measurements, and to evaluate the season-long effects of delayed irrigation on subsequent plant growth patterns. In both years, the short-season upland variety, DPL 20, was planted into a Pima clay loam soil [fine-silty, mixed (calcareous), thermic Typic Torrifluvent] that had received a preplant irrigation of 152 (1993) or 254 mm (1994) approximately 3 wk prior to planting. Treatments, designated T1, T2, and T3, received the initial postplant irrigation when the average midday LWP of the uppermost, fully expanded leaf measured −1.5, −1.9, and −2.3 MPa, respectively. Daily midday LWP measurements were taken using the pressure chamber technique. Soil water was measured at 25-cm depth increments using neutron attenuation. Plant height, number of mainstem nodes, nodes above white flower (NAWF), and canopy closure were measured at weekly intervals. All treatments reached maturity, as measured by NAWF ≤ 5, at approximately the same time during the growing season. Complete canopy closure was delayed in the T3 plots resulting in reduced interception and utilization of available solar radiation early in the growing season. When treatments were initiated, approximately 84% (T1), 62% (T2), and 32% (T3) of the total plant-available water (field capacity less permanent wilting point) was present in the upper 1.5 of the soil profile. Yields were 1263, 1244, and 1110 kg lint ha−1 in 1993 and 1229, 1176, and 1095 kg lint ha −1 in 1994 for T1, T2, and T3, respectively. Lint yields were significantly

Comparison of a wire belt conveyor and cross auger conveyor for conveying burr cotton on a stripper harvester

Science.gov (United States)

Cotton fiber quality begins to degrade naturally with the opening of the boll, and mechanical harvesting processes are perceived to exacerbate fiber degradation. Previous research indicates that stripper-harvested cotton generally has lower fiber quality including on average lower micronaire, length...

Characteristics and influencing factors of crop coefficient for drip-irrigated cotton under plastic mulch conditions in arid environment

DEFF Research Database (Denmark)

Ai, Zhipin; Yang, Yonghui; Wang, Qinxue

2017-01-01

agronomy practice such as plastic mulching and drip irrigation in arid environments. This study calculated and analyzed Kc of a drip-irrigated and plastic-mulched cotton field in Aksu Oasis of the arid Tarim River Basin, China, and its relationships with several crop-, soil- and management variables......-mulched condition already published, the Kc of mulched cotton for the entire growth season decreased by 16 to 39%. The largest reductions in Kc due to plastic mulch were found in the initial and developmental growth stage. Kc could be calculated by a third-degree polynomial model in relation to RGD, which...... significantly increased Kc, i.e., 29% on average, partly due to arid advection. This study provided up-to-date and detailed information on cotton crop coefficient under plastic mulching and drip irrigation conditions in arid environment, and it is useful for improved management of agricultural water resources....

RELIABILITY TESTING OF AN ON-HARVESTER COTTON WEIGHT MEASUREMENT SYSTEM

Science.gov (United States)

A system for weighing seed cotton onboard stripper harvesters was developed and installed on several producer owned and operated machines. The weight measurement system provides critical information to producers when in the process of calibrating yield monitors or conducting on-farm research. The ...

Soil moisture and plant canopy temperature sensing for irrigation application in cotton

Science.gov (United States)

A wireless sensor network was deployed in a cotton field to monitor soil water status for irrigation. The network included two systems, a Decagon system and a microcontroller-based system. The Decagon system consists of soil volumetric water-content sensors, wireless data loggers, and a central data...

Seasonal Canopy Temperatures for Normal and Okra Leaf Cotton under Variable Irrigation in the Field

Directory of Open Access Journals (Sweden)

James R. Mahan

2016-11-01

Full Text Available Temperature affects a number of physiological factors in plants and is related to water use, yield and quality in many crop species. Seasonal canopy temperature, measured with infrared thermometers, is often used in conjunction with environmental factors (e.g., air temperature, humidity, solar radiation to assess crop stress and management actions in cotton. Normal and okra leaf shapes in cotton have been associated with differences in water use and canopy temperature. The okra leaf shape in cotton is generally expected to result in lower water use and lower canopy temperatures, relative to normal leaf, under water deficits. In this study canopy temperatures were monitored in okra and normal leaf varieties for a growing season at four irrigation levels. Differences in canopy temperature (<2 °C were measured between the two leaf shapes. As irrigation levels increased, canopy temperature differences between the leaf shapes declined. At the lowest irrigation level, when differences in sensible energy exchanges due to the okra leaf shape would be enhanced, the canopy temperature of the okra leaf was warmer than the normal leaf. This suggests that varietal differences that are not related to leaf shape may have more than compensated for leaf shape differences in the canopy temperature.

[Effects of nitrogen and irrigation water application on yield, water and nitrogen utilization and soil nitrate nitrogen accumulation in summer cotton].

Science.gov (United States)

Si, Zhuan Yun; Gao, Yang; Shen, Xiao Jun; Liu, Hao; Gong, Xue Wen; Duan, Ai Wang

2017-12-01

A field experiment was carried out to study the effects of nitrogen and irrigation water application on growth, yield, and water and nitrogen use efficiency of summer cotton, and to develop the optimal water and nitrogen management model for suitable yield and less nitrogen loss in summer cotton field in the Huang-Huai region. Two experimental factors were arranged in a split plot design. The main plots were used for arranging nitrogen factor which consisted of five nitrogen fertilizer le-vels(0, 60, 120, 180, 240 kg·hm -2 , referred as N 0 , N 1 , N 2 , N 3 , N 4 ), and the subplots for irrigation factor which consisted of three irrigation quota levels (30, 22.5, 15 mm, referred as I 1 , I 2 , I 3 ). There were 15 treatments with three replications. Water was applied with drip irrigation system. Experimental results showed that both irrigation and nitrogen fertilization promoted cotton growth and yield obviously, but nitrogen fertilizer showed more important effects than irrigation and was the main factor of regulating growth and yield of summer cotton in the experimental region. With the increase of nitrogen fertilization rate and irrigation amount, the dry mater accumulation of reproductive organs, the above-ground biomass at the flowering-bolling stage and seed cotton yield increased gradually, reached peak values at nitrogen fertilization rate of 180 kg·hm -2 and decreased slowly with the nitrogen fertilization rate further increased. The maximum yield of 4016 kg·hm -2 was observed in the treatment of N 3 I 1 . Increasing nitrogen fertilizer amount would improve significantly total N absorption of shoots and N content of stem and leaf, but decrease nitrogen partial factor productivity. The maximum irrigation-water use efficiency of 5.40 kg·m -3 and field water use efficiency of 1.24 kg·m -3 were found in the treatments of N 3 I 3 and N 3 I 1 , respectively. With increasing nitrogen fertilization amount, soil NO 3 - -N content increased and the main soil

MIRCA2000—Global monthly irrigated and rainfed crop areas around the year 2000: A new high-resolution data set for agricultural and hydrological modeling

Science.gov (United States)

Portmann, Felix T.; Siebert, Stefan; DöLl, Petra

2010-03-01

To support global-scale assessments that are sensitive to agricultural land use, we developed the global data set of monthly irrigated and rainfed crop areas around the year 2000 (MIRCA2000). With a spatial resolution of 5 arc min (about 9.2 km at the equator), MIRCA2000 provides both irrigated and rainfed crop areas of 26 crop classes for each month of the year. The data set covers all major food crops as well as cotton. Other crops are grouped into categories (perennial, annual, and fodder grasses). It represents multicropping systems and maximizes consistency with census-based national and subnational statistics. According to MIRCA2000, 25% of the global harvested areas are irrigated, with a cropping intensity (including fallow land) of 1.12, as compared to 0.84 for the sum of rainfed and irrigated harvested crops. For the dominant crops (rice (1.7 million km2 harvested area), wheat (2.1 million km2), and maize (1.5 million km2)), roughly 60%, 30%, and 20% of the harvested areas are irrigated, respectively, and half of the citrus, sugar cane, and cotton areas. While wheat and maize are the crops with the largest rainfed harvested areas (1.5 million km2 and 1.2 million km2, respectively), rice is clearly the crop with the largest irrigated harvested area (1.0 million km2), followed by wheat (0.7 million km2) and maize (0.3 million km2). Using MIRCA2000, 33% of global crop production and 44% of total cereal production were determined to come from irrigated agriculture.

Response of Biomass Development, Essential Oil, and Composition of Plectranthus amboinicus (Lour.) Spreng. to Irrigation Frequency and Harvest Time.

Science.gov (United States)

Sabra, Ali S; Astatkie, Tessema; Alataway, Abed; Mahmoud, Abeer A; Gendy, Ahmed S H; Said-Al Ahl, Hussein A H; Tkachenko, Kirill G

2018-03-01

A greenhouse experiment was conducted to study the effects of four irrigation intervals (4, 8, 12, and 16 days) and six harvests (2, 4, 6, 8, 10, and 12 months after transplanting) on biomass, essential oil content, and composition of Plectranthus amboinicus (Lour.) Spreng. Fresh weight and essential oil yield decreased with increasing irrigation interval; whereas, essential oil content was stimulated by water stress and increased as the irrigation interval increased. Fresh weight of Plectranthus amboinicus irrigated every 4 days peaked when harvested at 6 months, but essential oil content peaked when irrigated every 16 days and harvested at 2 months after transplantation. On the other hand, essential oil yield peaked when irrigated every 8 days and harvested at 6 months. Thymol, p-cymene, γ-terpinene, and β-caryophyllene were the major compounds, and they peaked at different irrigation intervals and harvest times. This study showed biomass, essential oil content, and yield as well as the major and minor constituents of Plectranthus amboinicus are influenced by irrigation interval and the timing of harvest. © 2018 Wiley-VHCA AG, Zurich, Switzerland.

Vulnerabilities and Adapting Irrigated and Rainfed Cotton to Climate Change in the Lower Mississippi Delta Region

Directory of Open Access Journals (Sweden)

Saseendran S. Anapalli

2016-10-01

Full Text Available Anthropogenic activities continue to emit potential greenhouse gases (GHG into the atmosphere leading to a warmer climate over the earth. Predicting the impacts of climate change (CC on food and fiber production systems in the future is essential for devising adaptations to sustain production and environmental quality. We used the CSM-CROPGRO-cotton v4.6 module within the RZWQM2 model for predicting the possible impacts of CC on cotton (Gossypium hirsutum production systems in the lower Mississippi Delta (MS Delta region of the USA. The CC scenarios were based on an ensemble of climate projections of multiple GCMs (Global Climate Models/General Circulation Models for climate change under the CMIP5 (Climate Model Inter-comparison and Improvement Program 5 program, that were bias-corrected and spatially downscaled (BCSD at Stoneville location in the MS Delta for the years 2050 and 2080. Four Representative Concentration Pathways (RCP drove these CC projections: 2.6, 4.5, 6.0, and 8.5 (these numbers refer to radiative forcing levels in the atmosphere of 2.6, 4.5, 6.0, and 8.5 W·m−2, representing the increasing levels of the greenhouse gas (GHG emission scenarios for the future, as used in the Intergovernmental Panel on Climate Change-Fifth Assessment Report (IPCC-AR5. The cotton model within RZWQM2, calibrated and validated for simulating cotton production at Stoneville, was used for simulating production under these CC scenarios. Under irrigated conditions, cotton yields increased significantly under the CC scenarios driven by the low to moderate emission levels of RCP 2.6, 4.5, and 6.0 in years 2050 and 2080, but under the highest emission scenario of RCP 8.5, the cotton yield increased in 2050 but declined significantly in year 2080. Under rainfed conditions, the yield declined in both 2050 and 2080 under all four RCP scenarios; however, the yield still increased when enough rainfall was received to meet the water requirements of the crop (in

Carbon balance of a plastic mulch and drip irrigated cotton field in an arid oasis of Northwest China

Science.gov (United States)

Ming, G.

2017-12-01

Carbon balance of a plastic mulch and drip irrigated cotton field in an arid oasis of Northwest ChinaGuanghui Ming1, Fuqiang Tian1*, Hongchang Hu11State Key Laboratory of Hydroscience and Engineering, Department of Hydraulic Engineering, Tsinghua University, Beijing, China,Abstracts: Agricultural ecosystems have the potential to offset rising CO2 concentration in the atmosphere but the potential is often altered by agricultural management. Plastic film mulching and drip irrigation (PMDI) have been widespread for saving water and improving crop yield worldwide. To comprehensively assess the carbon balance and to detect the controlling factors of the carbon flux in a PMDI cotton field, experiments combining eddy covariance (EC) system, chamber method and crop sampling were implemented in an arid oasis of Xinjiang from the year 2012 to 2016. The annual net ecosystem exchange (NEE) was -250.18 ± 80.41 g C m-2 in the five years, which indicated that the filed was a much stronger carbon sink. After removal of the harvest of cotton as seed oil (Ch) of 108.81±7.57 g C m-2, the field was still a moderate carbon sink with net biome productivity (NBP) of 141.37±73.7 g C m-2. Soil temperature can explain 82% of seasonal variation of nighttime NEE while PAR can explain 36-81% of daytime NEE varying with crop development and photosynthetic activity. NEE was separated into total ecosystem respiration (Reco, 1214.20±144.42 g C m-2) and gross primary productivity (GPP, 1464.38±122.78 g C m-2). Interannual Reco changed more drastically than GPP and respiration may be the main determinant of carbon balance in the PMDI field. Seasonal NPP measured by cop sampling method (NPPCS) agreed well with NPP calculated with EC (NPPEC), with the annual NPP of 708.86 ± 52.26 g C m-2, which indicated that our carbon flux measurements and separating methods reasonable. The PMDI cotton field induced more GPP and Reco than other croplands with larger light use efficiency (LUE) but relatively

Yields of cotton and other crops as affected by applications of sulfuric acid in irrigation water

Energy Technology Data Exchange (ETDEWEB)

Christensen, P.D.; Lyerly, P.J.

1954-01-01

Effects of sulfuric acid on crop yields and on some physical and chemical properties of a calcareous soil were investigated in a field experiment from 1947 through 1952. On cotton plots, the treatments consisted of applications of irrigation water containing no acid (pH 8.3), water acidified to pH 6, and water acidified to pH 2.3. Cotton was grown five seasons followed by sesbania the sixth season. A test on alfalfa was established using irrigation water not acidified and water acidifeid to pH 4. Alfalfa was grown for 3 years. The fourth year the alfalfa was plowed under and a crop of corn was raised. Cotton yields on the acid plots relative to the checks became progressively higher (with two exceptions) from one year to the next; however, in only one year (1950) were differences in yield statistically significant. With sesbania following cotton, highly significant yield increases resulted from the high acid treatment. Alfalfa yields on the acid plots became progressively greater relative to the non-acid plots, but yield differences were not significant. In cotton leaves, the acid treatments resulted in increased uptake of magnesium, sulfur, and phosphorus, but the increases were probably not significant. Uptake of sodium, potassium, calcium, manganese, and iron were not appreciably affected. In sesbania, the acid treatments did not significantly alter the uptake of any of the plant nutrients determined. There was some indication, however, that the uptake of sodium and iron was reduced by the acidification. The results of this study support the view that soil acidification on calcareous soils may improve the soil physical conditions and result in increased yields, particularly in some crops. The application of acid in the irrigation water did not prove to be economically feasible. 12 references, 1 figure, 7 tables.

Development of a framework and tool to asses on-farm energy uses of cotton production

International Nuclear Information System (INIS)

Chen Guangnan; Baillie, Craig

2009-01-01

Within highly mechanised agricultural productions systems such as the Australian cotton industry, operational energy inputs represent a major cost to the growers. In this paper, a framework to assess the operational energy inputs of various production systems and the relative performance of a grower within an adopted system is developed. It divides energy usage of cotton production into six broadly distinct processes, including fallow, planting, in-crop, irrigation, harvesting and post harvest. This enables both the total energy inputs and the energy usage of each production processes to be assessed. This framework is later implemented and incorporated into an online energy assessment tool (EnergyCalc). Using the developed software, seven farm audits are conducted. It is found that overall, depending on the management and operation methods adopted, the total energy inputs for these farms range from 3.7 to 15.2 GJ/ha of primary energy, which corresponds to $80-310/ha and 275-1404 kg CO 2 equivalent/ha greenhouse gas emissions. Among all the farming practices, irrigation water energy use is found to be the highest and is typically 40-60% of total energy costs. Energy use of the harvesting operation is also significant, accounting for approximately 20% of overall direct energy use. If a farmer moves from conventional tillage to minimum tillage, there is a potential saving of around 10% of the overall fuel used on the farm. Compared with cotton, energy uses by other crops are generally much smaller, due to less intensive management practices, and reduced irrigation requirements.

Evaluation of superabsorbent efficiency in response to dehydration frequencies, salinity and temperature and its effect on yield and quality of cotton under deficit irrigation

Directory of Open Access Journals (Sweden)

Hamid-Reza Fallahi

2016-03-01

Full Text Available Introduction Reduced availability of water resources in many arid countries including Iran, particularly in response to the indiscriminate harvesting of water reservoirs and climate change, has created concerns. Therefore, the sustainable use of water resources especially in agriculture is a necessity for these countries. Strategies such as deficit irrigation and superabsorbent application are two important ways for improving water use efficiency in agricultural lands. In deficit irrigation the crop must be irrigated less than its required water. Therefore, some reduction may occur in crop yield, but the savings in water will improve the water use efficiency (Akbari Nodehi, 2011. Superabsorbent polymers also increase the nutrients and water holding capacity of soil for a long time and thereby reduce crop water requirement. However, the effectiveness of these materials could be affected by dehydration frequencies, temperature and irrigation water quality (Karimi et al., 2009. Due to the limitation of water resources in many parts of Iran, the aim of this study was to investigate the possibility of cotton production under deficit irrigation along with application of different rates of superabsorbent. In addition, simulation of superabsorbent efficiency at different levels of salinity, temperature and dehydration frequencies (swelling and de-swelling were the other objectives in this study. Materials and methods 1. Laboratory experiments In these experiments the effects of temperature (4, 10, 20, 30 and 40 °C, salinity (0, 0.25, 0.5, 0.75 and 1% NaCl solutions at two temperatures of 10 and 25°C and frequency of partial dehydration (from 1 to 5 stages watering and 70% dewatering were simulated on water absorption capacity of superabsorbent polymer at laboratory of environmental stresses, Sarayan Faculty of Agriculture, Birjand University. 2- Field experiment This experiment was designed at Research Station of Sarayan Faculty of Agriculture

Assessment of water quality from water harvesting using small farm reservoir for irrigation

Science.gov (United States)

Dewi, W. S.; Komariah; Samsuri, I. Y.; Senge, M.

2018-03-01

This study aims to assess the quality of rainfall-runoff water harvesting using small farm reservoir (SFR) for irrigation. Water quality assessment criteria based on RI Government Regulation number 82 the year 2001 on Water Quality Management and Pollution Control, and FAO Irrigation Water Quality Guidelines 1985. The experiment was conducted in the dry land of Wonosari Village, Gondangrejo District, Karanganyar Regency. SFR size was 10 m x 3 m x 2 m. Water quality measurements are done every week, ten times. Water samples were taken at 6 points, namely: distance of 2.5 m, 5 m, and 7.5 m from the inlet, at depth 25 cm and 175 cm from surface water. In each sampling point replicated three times. Water quality parameters include dissolved oxygen (DO), Turbidity (TSS), water pH, Nitrate (NO3), and Phosphate. The results show that water harvesting that collected in SFR meets both standards quality used, so the water is feasible for agricultural irrigation. The average value of harvested water was DO 2.6 mg/l, TSS 62.7 mg/l, pH 6.6, P 5.3 mg/l and NO3 0.16 mg/l. Rainfall-runoff water harvesting using SFR prospectus for increasing save water availability for irrigation.

Effects of irrigation levels on interactions among Lygus hesperus (Hemiptera: Miridae), insecticides, and predators in cotton.

Science.gov (United States)

Asiimwe, Peter; Naranjo, Steven E; Ellsworth, Peter C

2014-04-01

Variation in plant quality and natural enemy abundance plays an important role in insect population dynamics. In manipulative field studies, we evaluated the impact of varying irrigation levels and insecticide type on densities of Lygus hesperus Knight and the arthropod predator community in cotton. Three watering levels were established via irrigations timed according to three levels of percent soil water depletion (SWD): 20, 40, or 60, where 40% SWD is considered standard grower practice, 60% represents a deficit condition likely to impose plant productivity losses, and 20% represents surplus conditions with likely consequences on excessive vegetative plant production. The two key L. hesperus insecticides used were the broad-spectrum insecticide acephate and the selective insecticide flonicamid, along with an untreated check. We hypothesized that densities of L. hesperus and its associated predators would be elevated at higher irrigation levels and that insecticides would differentially impact L. hesperus and predator dynamics depending on their selectivity. L. hesperus were more abundant at the higher irrigation level (20% SWD) but the predator densities were unaffected by irrigation levels. Both L. hesperus and its predators were affected by the selectivity of the insecticide with highest L. hesperus densities and lowest predator abundance where the broad spectrum insecticide (acephate) was used. There were no direct interactions between irrigation level and insecticides, indicating that insecticide effects on L. hesperus and its predators were not influenced by the irrigation levels used here. The implications of these findings on the overall ecology of insect-plant dynamics and yield in cotton are discussed.

100 Years of Cotton Production, Harvesting and Ginning Systems Engineering: 1907 - 2007

Science.gov (United States)

The American Society of Agricultural and Biological Engineers (ASABE) celebrated its centennial year during 2007. As part of the ASABE centennial, the authors were asked to describe agricultural engineering accomplishments in U.S. cotton production, harvesting and ginning over the past 100 years. ...

[Effects of soil wetting pattern on the soil water-thermal environment and cotton root water consumption under mulched drip irrigation].

Science.gov (United States)

Li, Dong-wei; Li, Ming-si; Liu, Dong; Lyu, Mou-chao; Jia, Yan-hui

2015-08-01

Abstract: To explore the effects of soil wetting pattern on soil water-thermal environment and water consumption of cotton root under mulched drip irrigation, a field experiment with three drip intensities (1.69, 3.46 and 6.33 L · h(-1)), was carried out in Shihezi, Xinjiang Autonomous Region. The soil matric potential, soil temperature, cotton root distribution and water consumption were measured during the growing period of cotton. The results showed that the main factor influencing the soil temperature of cotton under plastic mulch was sunlight. There was no significant difference in the soil temperature and root water uptake under different treatments. The distribution of soil matrix suction in cotton root zone under plastic mulch was more homogeneous under ' wide and shallow' soil wetting pattern (W633). Under the 'wide and shallow' soil wetting pattern, the average difference of cotton root water consumption between inner row and outer row was 0.67 mm · d(-1), which was favorable to the cotton growing trimly at both inner and outer rows; for the 'narrow and deep' soil wetting pattern (W169), the same index was 0.88 mm · d(-1), which was unfavorable to cotton growing uniformly at both inner and outer rows. So, we should select the broad-shallow type soil wetting pattern in the design of drip irrigation under mulch.

Rational Water and Nitrogen Management Improves Root Growth, Increases Yield and Maintains Water Use Efficiency of Cotton under Mulch Drip Irrigation

Directory of Open Access Journals (Sweden)

Hongzhi Zhang

2017-05-01

Full Text Available There is a need to optimize water-nitrogen (N applications to increase seed cotton yield and water use efficiency (WUE under a mulch drip irrigation system. This study evaluated the effects of four water regimes [moderate drip irrigation from the third-leaf to the boll-opening stage (W1, deficit drip irrigation from the third-leaf to the flowering stage and sufficient drip irrigation thereafter (W2, pre-sowing and moderate drip irrigation from the third-leaf to the boll-opening stage (W3, pre-sowing and deficit drip irrigation from the third-leaf to the flowering stage and sufficient drip irrigation thereafter (W4] and N fertilizer at a rate of 520 kg ha-1 in two dressing ratios [7:3 (N1, 2:8 (N2] on cotton root morpho-physiological attributes, yield, WUE and the relationship between root distribution and dry matter production. Previous investigations have shown a strong correlation between root activity and water consumption in the 40–120 cm soil layer. The W3 and especially W4 treatments significantly increased root length density (RLD, root volume density (RVD, root mass density (RMD, and root activity in the 40–120 cm soil layer. Cotton RLD, RVD, RMD was decreased by 13.1, 13.3, and 20.8%, respectively, in N2 compared with N1 at 70 days after planting (DAP in the 0–40 cm soil layer. However, root activity in the 40–120 cm soil layer at 140 DAP was 31.6% higher in N2 than that in N1. Total RMD, RLD and root activity in the 40–120 cm soil were significantly and positively correlated with shoot dry weight. RLD and root activity in the 40–120 cm soil layer was highest in the W4N2 treatments. Therefore increased water consumption in the deep soil layers resulted in increased shoot dry weight, seed cotton yield and WUE. Our data can be used to develop a water-N management strategy for optimal cotton yield and high WUE.

Cotton harvest at 40% versus 75% boll-splitting on yield and economic return under standard and proactive boll weevil (Coleoptera: Curculionidae) spray regimes.

Science.gov (United States)

Showler, A T; Robinson, J R C

2008-10-01

The standard practice of two or three preemptive insecticide applications at the start of pinhead (1-2-mm-diameter) squaring followed by threshold-triggered (when 10% of randomly selected squares have oviposition punctures) insecticide applications for boll weevil, Anthonomus grandis grandis Boheman (Coleoptera: Curculionidae), control does not provide reliable protection of cotton, Gossypium hirsutum L., lint production. This study, conducted during 2004 and 2005, showed that three to six fewer spray applications in a "proactive" approach, in which spraying began at the start of large (5.5-8-mm-diameter) square formation and continued at approximately 7-d intervals while large squares were abundant, resulted in fewer infested squares and 1.4- to 1.7-fold more lint than the standard treatment. Fewer sprays and increased yield made proactive spraying significantly more profitable than the standard approach, which resulted in relatively low or negative economic returns. Harvest at 75% boll-split in the proactive spray regime of 2005 resulted in four-fold greater economic return than cotton harvested at 40% boll-split because of improved protection of large squares and the elimination of late-season sprays inherent to standard spray regime despite the cost of an extra irrigation in the 75% boll-split treatments. The earlier, 40% harvest trigger does not avoid high late-season boll weevil pressure, which exerts less impact on bolls, the predominant form of fruiting body at that time, than on squares. Proactive spraying and harvest timing are based on an important relationship between nutrition, boll weevil reproduction, and economic inputs; therefore, the tactic of combining proaction with harvest at 75% boll-split is applicable where boll weevils are problematic regardless of climate or region, or whether an eradication program is ongoing.

Reducing microbial contamination on wastewater-irrigated lettuce by cessation of irrigation before harvesting

DEFF Research Database (Denmark)

Keraita, Bernard; Konradsen, Flemming; Drechsel, Pay

2007-01-01

OBJECTIVE: To assess the effectiveness of cessation of irrigation before harvesting in reducing microbial contamination of lettuce irrigated with wastewater in urban vegetable farming in Ghana. METHODS: Assessment was done under actual field conditions with urban vegetable farmers in Ghana. Trials...... were arranged in completely randomized block design and done both in the dry and wet seasons. Seven hundred and twenty-six lettuce samples and 36 water samples were analysed for thermotolerant coliforms and helminth eggs. RESULTS: On average, 0.65 log units for indicator thermotolerant coliforms and 0.......4 helminth eggs per 100 g of lettuce were removed on each non-irrigated day from lettuce in the dry season. This corresponded to a daily loss of 1.4 tonnes/ha of fresh weight of lettuce. As an input for exposure analysis to make risk estimates, the decay coefficient, k, for thermotolerant coliforms was 0...

Effect of Mowing Cotton Stalks and Preventing Plant Re-Growth on Post-Harvest Reproduction of Meloidogyne incognita

Science.gov (United States)

Davis, Richard F.; Kemerait, Robert C.

2010-01-01

The southern root-knot nematode (Meloidogyne incognita) is a major parasite of cotton in the U.S., and management tactics for this nematode attempt to minimize population levels. We compared three post-harvest practices for their ability to reduce nematode population levels in the field, thereby reducing initial nematode population for the next year's crop. The three practices tested were: 1) chemical defoliation before harvest plus cutting cotton stalks after harvest, 2) chemical defoliation plus applying a herbicide to kill plants prior to cutting the stalks, and 3) chemical defoliation without cutting stalks. Experiments were conducted in both the greenhouse and in the field. The greenhouse experiments demonstrated that M. incognita reproduction (measured as egg counts and root gall rating indices) was significantly greater when stalks were not cut. Cutting stalks plus applying herbicide to kill cotton roots did not significantly reduce nematode reproduction compared to cutting stalks alone. In field experiments, cutting stalks reduced egg populations and root galling compared to defoliation without stalk cutting. In a greenhouse bioassay which used soil from the field plots, plants grown in soil from the defoliation only treatment had greater root gall ratings and egg counts than in the stalk cutting plus herbicide treatment. Therefore, we conclude that cutting cotton stalks immediately after harvest effectively reduces M. incognita reproduction, and may lead to a lower initial population density of this nematode in the following year. PMID:22736845

Relationships between carbon fluxes and environmental factors in a drip-irrigated, film-mulched cotton field in arid region.

Directory of Open Access Journals (Sweden)

Xiaoyu Li

Full Text Available Environmental factors and human activities play important roles in carbon fixation and emissions generated from croplands. Eddy covariance measurements in a drip-irrigated, film-mulched cotton field were used to analyze the relationships between carbon fluxes and environmental factors in Wulanwusu, northern Xinjiang, an arid region of Northwest China. Our results showed that the cumulative net carbon flux (NEE was -304.8 g C m-2 (a strong sink over the whole cotton growing season in 2012, which was more than that in cotton cropland without plastic film mulching and drip-irrigation. Moreover, when time is scaled up from a half-hour to a month, the correlations of gross primary production (GPP to air temperature (Tair, net solar radiation (Rn and soil water content (SWC gradually become stronger due to ecosystem resistance and resilience as well as the protection of plastic film mulching. The GPP is more strongly correlated with Rn than Tair at time scales from minutes to days, while it reverses at time scales from days to weeks. This outcome is largely determined by the biochemical characteristics of photosynthesis. SWC and vapor pressure deficit (VPD at all time scales are weakly correlated with GPP because plastic film mulching and regularly drip-irrigation allow soil to maintain sufficient water.

Effects of seedbed preparation, irrigation, and water harvesting of seedling emergence at the Nevada Test Site

International Nuclear Information System (INIS)

Winkel, V.K.; Ostler, W.K.; Gabbert, W.D.; Lyon, G.E.

1994-02-01

Approximately 800 hectares on the US Department of Energy Nevada Test Site and vicinity are contaminated with plutonium. As part of a cleanup effort, both the indigenous vegetation and the top 5--10 cm of soil may be removed, and the soil may or may not be replaced. Technologies must be developed to stabilize and revegetate these lands. A study was developed to determine adaptable plant species, methods to prepare seedbeds for direct seeding and water harvesting, and proper irrigation rates. Plots were cleared of indigenous vegetation, and then prepared with various seedbed/water harvesting treatments including, pitting, land imprinting, and mulching. Other plots were treated with large water harvesting structures. Three irrigation treatments were superimposed over the seedbed/water harvesting treatments. Seedling emergence data was collected, and the treatment combinations compared. Supporting meteorological and soil data were collected with an automatic data-logger. Specific data included precipitation, and air temperature. In a year of above-average precipitation, irrigation did not generally aid germination and emergence of seeded species, and only slightly increased densities of species from the native seedbank. With the exception of increased shrub seedling densities in desert strips, there were no strong seedbed preparation/water harvesting treatment effects. In years of above-average rainfall, mulching and water harvesting treatments, irrigation may not be necessary to insure adequate germination and emergence of adapted perennial grasses, forbs, and shrubs in the Mojave/Great Basin Transition Desert. Future collection of survival data will determine whether a maintenance irrigation program is necessary to ensure establishmnent of native plants

Molecular Characterization and Germination Analysis of Cotton (Gossypium hirsutum L. Genotypes under Water Deficit Irrigation

Directory of Open Access Journals (Sweden)

Eminur ELÇİ

2016-09-01

Full Text Available Cotton is an important crop in terms of economic and strategic impacts. Drought stress is one of the most important environmental stress factors which negatively affects growth and yield of plants in Turkey as occurred in many countries in the world. In this study, 11 different cotton cultivars selected based on their agronomical characters were tested under water deficit irrigation strategies. Thus, it was aimed to select and/or determine appropriate new varieties for breeding new national materials resistant to drought stress, and to characterize with the molecular microsatellite markers. According to the different irrigation levels (25%, 50%, 75% and 100% plants were observed under the stressed conditions at the irrigation levels of 50% and 25%. Among the tested varieties, Tamcot Sphinx, Tamcot 94, Tamcot CamdEs and BA525 varieties were found to be more water stress tolerant than others in terms of germination time and germinated plant. The UPGMA (Unweighted Pair-Group Method Using Arithmetic Averages analysis was carried out using 28 markers with average 0.306 polymorphism information content (PIC for molecular characterization studies. Based on the UPGMA results, the varieties were clustered into two groups. It is expected that the results obtained from this study might provide considerable data for improving new drought tolerant varieties.

Yielding of leaf celery Apium graveolens L. var. secalinum Alef. depending on the number of harvests and irrigation

Directory of Open Access Journals (Sweden)

Ewa Rożek

2013-04-01

Full Text Available Leaf celery (Apium graveolensvar. secalinum is a vegetable with medicinal and spicy properties. Its numerous intensely fragrant leaves can be cut several times during the plant growing period. The aim of this study was to evaluate the effect of irrigation and number of harvests on leaf celery yield of the cultivars ‘Afina’ and‘Gewone Snij’. Plant irrigation significantly increased leaf yield and plant height of leaf celery. Higher total yield was obtained from non-irrigated plants when leaves were harvested three times, whereas for irrigated plants yield was higher in the case of two leaf harvests. Irrespective of the experimental factors, higher yield was obtained from the cultivar ‘Gewone Snij’.

Yield response of cotton, maize, soybean, sugar beet, sunflower and wheat to deficit irrigation

International Nuclear Information System (INIS)

Kirda, C.; Kanber, R.; Tulucu, K.

1995-01-01

Results of several field experiments on deficit irrigation programmes in Turkey are discussed. Deficit irrigation of sugar beet with water stress imposed (i e.,irrigation omitted)during ripening,stage saved nearly 22 % water, yet with no significant yield decrease. An experiment, conducted in Turkey Region, the European part of Turkey,and aimed at studying water production functions of sunflower(i e,yield vs water consumption), revealed that water stress imposed at either head forming or seed filling stags influence yield the least , and 40 % savings of irrigation water supply , compared with traditional practices in the region, can be achieved without significant yield reduction. Water stress imposed at vegetative and flowering stages of maize hindered the yield most significantly. The results showed that deficit irrigation can be a feasible option under limited supply of irrigation if stress occurs during yield formation stage. A four year field experiments aiming at developing deficit irrigation strategies for soybean showed that soybean was at the most sensitive to water stress during flowering and pod filling stages, and irrigation during these stages would ensure high yields. Results of experiments on cotton showed that irrigations omitted during yield formation stage did not significantly hinder the yield. Similarly wheat give good yield response if irrigated at booting,heading and milking stages, depending on w heather conditions. In areas where rainfall at planting is limited, supplementary irrigation during this period can ensure good establishment of wheat crop. 1 tab; 9 figs; 59 refs (Author)

Chemical-Free Cotton Defoliation by; Mechanical, Flame and Laser Girdling

Directory of Open Access Journals (Sweden)

Mathew G. Pelletier

2017-01-01

Full Text Available A novel new way to achieve chemical-free defoliation of cotton is discussed. The research found that by severing the phloem tissue on the main stalk, via a girdling operation, the operation stimulated the cotton plant to alter its growth into an early senescence pathway that resulted in the plant shedding its leaves and opening up all its bolls, leaving the plant in the perfect state for machine harvesting. Even with follow-up rains, zero regrowth occurred in the treated plants, unlike the untreated control plots where significant regrowth did occur. This report compares the results of greenhouse and field trials where the girdling operation was performed by hand, flame, mechanical and via a CO2 laser to achieve phloem tissue severance. Design parameters for a prototype laser girdling system are also provided. Results suggest that for deficit irrigated cotton, girdling can provide an alternative means to defoliate cotton.

Water quality of surface runoff and lint yield in cotton under furrow irrigation in Northeast Arkansas

Science.gov (United States)

Use of furrow irrigation in row crop production is a common practice through much of the Midsouth US and yet, nutrients can be transported off-site through surface runoff. A field study with cotton (Gossypium hirsutum, L.) was conducted to understand the impact of furrow tillage practices and nitrog...

Relationships between carbon fluxes and environmental factors in a drip-irrigated, film-mulched cotton field in arid region

OpenAIRE

Li, Xiaoyu; Liu, Lijuan; Yang, Huijin; Li, Yan

2018-01-01

Environmental factors and human activities play important roles in carbon fixation and emissions generated from croplands. Eddy covariance measurements in a drip-irrigated, film-mulched cotton field were used to analyze the relationships between carbon fluxes and environmental factors in Wulanwusu, northern Xinjiang, an arid region of Northwest China. Our results showed that the cumulative net carbon flux (NEE) was -304.8 g C m-2 (a strong sink) over the whole cotton growing season in 2012, w...

Expanding the Annual Irrigation Maps (AIM) Product to the entire High Plains Aquifer (HPA): Addressing the Challenges of Cotton and Deficit-Irrigated Fields

Science.gov (United States)

Rapp, J. R.; Deines, J. M.; Kendall, A. D.; Hyndman, D. W.

2017-12-01

The High Plains Aquifer (HPA) is the most extensively irrigated aquifer in the continental United States and is the largest major aquifer in North America with an area of 500,000 km2. Increased demand for agricultural products has led to expanded irrigation extent, but brought with it declining groundwater levels that have made irrigation unsustainable in some locations. Understanding these irrigation dynamics and mapping irrigated areas through time are essential for future sustainable agricultural practices and hydrological modeling. Map products using remote sensing have only recently been able to track annual dynamics at relatively high spatial resolution (30 m) for a large portion of the northern HPA. However follow-on efforts to expand these maps to the entire HPA have met with difficulty due to the challenge of distinguishing irrigation in crop types that are commonly deficit- or partially-irrigated. Expanding these maps to the full HPA requires addressing unique features of partially irrigated fields and irrigated cotton, a major water user in the southern HPA. Working in Google Earth Engine, we used all available Landsat imagery to generate annual time series of vegetation indices. We combined this information with climate covariables, planting dates, and crop specific training data to algorithmically separate fully irrigated, partially irrigated, and non-irrigated field locations. The classification scheme was then applied to produce annual maps of irrigation across the entire HPA. The extensive use of ancillary data and the "greenness" time series for the algorithmic classification generally increased accuracy relative to previous efforts. High-accuracy, representative map products of irrigation extent capable of detecting crop type and irrigation intensity within aquifers will be an essential tool to monitor the sustainability of global aquifers and to provide a scientific bases for political and economic decisions affecting those aquifers.

Single and multiple in-season measurements as indicators of at-harvest cotton boll damage caused by verde plant bug (Hemiptera: Miridae).

Science.gov (United States)

Brewer, Michael J; Armstrong, J Scott; Parker, Roy D

2013-06-01

The ability to monitor verde plant bug, Creontiades signatus Distant (Hemiptera: Miridae), and the progression of cotton, Gossypium hirsutum L., boll responses to feeding and associated cotton boll rot provided opportunity to assess if single in-season measurements had value in evaluating at-harvest damage to bolls and if multiple in-season measurements enhanced their combined use. One in-season verde plant bug density measurement, three in-season plant injury measurements, and two at-harvest damage measurements were taken in 15 cotton fields in South Texas, 2010. Linear regression selected two measurements as potentially useful indicators of at-harvest damage: verde plant bug density (adjusted r2 = 0.68; P = 0.0004) and internal boll injury of the carpel wall (adjusted r2 = 0.72; P = 0.004). Considering use of multiple measurements, a stepwise multiple regression of the four in-season measurements selected a univariate model (verde plant bug density) using a 0.15 selection criterion (adjusted r2 = 0.74; P = 0.0002) and a bivariate model (verde plant bug density-internal boll injury) using a 0.25 selection criterion (adjusted r2 = 0.76; P = 0.0007) as indicators of at-harvest damage. In a validation using cultivar and water regime treatments experiencing low verde plant bug pressure in 2011 and 2012, the bivariate model performed better than models using verde plant bug density or internal boll injury separately. Overall, verde plant bug damaging cotton bolls exemplified the benefits of using multiple in-season measurements in pest monitoring programs, under the challenging situation when at-harvest damage results from a sequence of plant responses initiated by in-season insect feeding.

Effect of tillage on water advance and distribution under surge and continuous furrow irrigation methods for cotton in Egypt

NARCIS (Netherlands)

Ismail, S.M.

2006-01-01

A field experiment was carried out to assess the effect of tillage on water advance and water distribution in the root zone area (0.5 m) under continuous and surge flow irrigation in a cotton field. The experiment was conducted at the Agriculture Experimental Station, Assiut University, Assiut,

Off-site movement of endosulfan from irrigated cotton in New South Wales.

Science.gov (United States)

Kennedy, I R; Sánchez-Bayo, F; Kimber, S W; Hugo, L; Ahmad, N

2001-01-01

The fate and transport of endosulfan (6,7,8,9,10,10-hexachloro-1,5, 5a,6,9,9a-hexahydro-6,9-methano-2,4,3-benzodioxathiepin 3-oxide) applied to cotton (Gossypium hirsutum L.) fields were studied throughout three consecutive years on two selected locations in New South Wales (Australia). Rates of dissipation from foliage and soil, volatilization from the field, and transport of residues in irrigation and/or storm runoff waters were measured in order to estimate a total field balance. Dissipation of endosulfan from both foliage and soil is best explained by a two-phase process rather than by a first-order decay. Half-lives of total endosulfan toxic residues (alpha- and beta-endosulfan and the sulfate product) in the first phase were 1.6 d in foliage and 7.1 d in soil, and could be explained by the rapid volatilization of the parent isomers in the first 5 d (up to 70% of endosulfan volatilizes). In the second phase, half-lives were 9.5 d in foliage and 82 d in soil, mostly due to the persistence of the sulfate product. Concentration of endosulfan residues in runoff water varied from 45 to 2.5 microg L(-1) depending on the residue levels present on field soil at the time of the irrigation or storm events. These in turn are related to the total amounts applied, the cotton canopy cover at application, and the time since last spraying. Most of the endosulfan in runoff was found in the water phase (80%), suggesting it was bound to colloidal matter. Total endosulfan residues in runoff for a whole season accounted for no more than 2% of the pesticide applied on-field.

Evaluation of different methods of measuring evapotranspiration as a scheduling guide for drip-irrigated cotton

International Nuclear Information System (INIS)

Rawitz, E.; Marani, A.; Mahrer, Y.; Berkovich, D.

1983-01-01

Evapotranspiration in a drip-irrigated cotton field was estimated by the energy balance method, net radiation, standard evaporation pan, evaporation pan in the field at canopy height, and by the Penman equation, and the results were compared with the soil-water balance based on neutron meter and tensiometer data from seven observation sites. Evapotranspiration according to the soil-water balance was only about 85% of that determined by the energy balance method, and this is attributed to the fact that irrigation laterals were placed every second row, and the soil-water balance was determined in the irrigated rows. The crop also utilized moisture stored from winter rains in the unirrigated inter-row spaces, which was detected by the energy balance method. Actual evapotranspiration (ET) was 96% of potential ET (Penman), and the latter equalled 98% of net radiation energy. The actual ET equalled 90% of free water evaporation from the pan in the field at canopy height, and 88% of net radiation. The high-frequency drip regime maintained ET very close to potential ET, and under these conditions the field-installed evaporation pan, or the net radiometer, are good indicators of crop water use, with the latter being adaptable to computer-controlled irrigation. (author)

Comparative study of nitrogen fertilizer use efficiency of cotton grown under conventional and fertigation practices using 15N methodology

International Nuclear Information System (INIS)

Janat, M.; Somi, G.

2002-01-01

Nitrogen fertilization and irrigation methods are the key factors of yield increase. With proper management of these two factors a good production and protection of the environment could be attained at the same time. Field experiments were carried out at Hama (Tezeen's Agricultural Research Station) for four consecutive years 1995=1998. The objectives of this study were: Assessment of nitrogen fertilizer use efficiency (NFUE) under conventional and fertigation practices; Nitrogen requirements of cotton crop grown under fertigation practices: Comparative study of water use efficiency (WUE), and seed cotton yield of cotton crop grown under conventional and drip irrigation. Treatments consisted of five nitrogen rates for the fertigated cotton crop (0, 60, 120, 180 and 240 kg N ha -1 ). While of the surface irrigated cotton treatment only one recommended rate by MAAR was applied (180 kg N ha -1 ). Irrigation methods and N treatments were arranged in RBD. The soil water content and available soil nitrogen were monitored according to the standard procedures. The results revealed that fertigation of cotton under the given circumstances improved water use efficiency, nitrogen use efficiency, seed cotton yield, dry matter production, earliness and in some cases lint properties. Under fertigation practices 35-55% of the irrigation water was saved in comparison with surface irrigated cotton grown under the same condition. The seed cotton yield was increased by more than 50% relatively to the surface irrigated cotton. Furthermore, water use efficiency of the fertigated cotton was increased by almost 90 %. (author)

Genotype-by-sowing date interaction effects on cotton yield and quality in irrigated condition of dera ismail khan, pakistan

International Nuclear Information System (INIS)

Usman, K.; Khan, S.; Ayatullah, A.

2016-01-01

Cotton is a major export commodity of Pakistan. It is affected by variable environmental conditions throughout the country which limits its production. A 2-year field study was conducted in 2012 and 2013 at Cotton Research Station, Dera Ismail Khan, Pakistan to evaluate the effects of six sowing dates on yield and quality attributes of four cotton genotypes. The experiments were laid out in split-plot within a randomized complete block design with three replications. Main plots treatments were six sowing dates, namely March 20, April 4, April 19, May 4, May 19, and June 3 while subplots treatments were four approved transgenic varieties of cotton (CIM-598, CIM-599, CIM-602, and Ali Akber-703). Results revealed that earlier planting produced more vegetative growth rather than lint yield while late planting induced flowering and boll formation when temperature was much cold that adversely affected cotton yield and quality. The results further indicate that the genotype CIM-599 scored first rank in number of bolls plant-1, boll weight, seed cotton yield, ginning out turn, fiber length, fiber strength, fiber fineness, and fiber uniformity when sown on April 19. CIM-598 was the next suitable genotype after CIM-599 which produced higher yield and quality traits in April 19 sowing. Earlier and later sowing than April 19 resulted in lower cotton yield and quality characters due to unfavorable environmental conditions and shorter growth period, respectively. Thus it is concluded that the genotype, CIM-599 sown on April 19 suits well to the study area and had the potential to optimize cotton yield and quality in irrigated condition of Dera Ismail Khan, Pakistan. (author)

Quantification and characterization of cotton crop biomass residue

Science.gov (United States)

Cotton crop residual biomass remaining in the field after mechanical seed cotton harvest is not typically harvested and utilized off-site thereby generating additional revenue for producers. Recently, interest has increased in utilizing biomass materials as feedstock for the production of fuel and ...

Variation in water-use efficiency and its relation to carbon isotope ratio in cotton

International Nuclear Information System (INIS)

Saranga, Y.; Flash, I.; Yakir, D.

1998-01-01

Cotton (Gossypium spp.) is often exposed to drought, which adversely affects both yield and quality. Improved water-use efficiency (WUE = total dry matter produced or yield harvested / water used) is expected to reduce these adverse effects. Genetic variability in WUE and its association with photosynthetic rate and carbon isotope ratio (13C/12C) in cotton are reported in this paper. WUE of six cotton cultivars--G. hirsutum L., G. barbadense L., and an interspecific F1 hybrid (G. hirsutum x G. barbadense, ISH), was examined under two irrigation regimes in two field trials. The greatest WUE was obtained by two G. hirsutum cultivars (2.55 g dry matter or 1.12 g seed-cotton L-1 H2O) the ISH obtained similar or somewhat lower values, and that G. barbadense cultivars and one G. hirsutum cultivar exhibited the lowest values (2.1 g dry matter or 0.8 to 0.85 g seed-cotton L-1 H2O). These results indicate that different cotton cultivars may have evolved different environmental adaptations that affect their WUE. Photosynthetic rate was correlated with WUE in only a few cases emphasizing the limitation of this parameter as a basis for estimating crop WUE. Under both trials WUE was positively correlated with carbon isotope ratio, indicating the potential of this technique as a selection criterion for improving cotton WUE

Drought tolerance studies through WSSI and stomata in upland cotton

International Nuclear Information System (INIS)

Baloch, M.J.; Jatoi, W.A.; Soomro, Z.A.; Khan, N.U.; Hassan, G.; Khakwani, A.A.; Veesar, N.F.

2011-01-01

Water stress susceptibility index (WSSI) and stomatal conductance were used to determine the stress tolerance of 10 upland cotton cultivars during 2009 at Sindh Agriculture University, Tandojam, Pakistan. The experiment was conducted in spilt plot design with irrigations as main plots and cultivars as sub-plots. Two irrigation treatments were used i.e. one has two irrigations (water stress) and other has eight irrigations (non-stress). Analysis of variance revealed significant genotypic differences about WSSI for all the traits. Non-significant interaction between irrigations and cultivars for seed cotton yield and boll weight exhibited varietals stability over irrigation regimes, whereas significant interactions between above parameters for plant height and bolls per plant suggested genotypic instability over irrigation treatments for these traits. Overall, cultivars mean performance for all the traits in stress conditions was poor as compared to non-stress conditions, nevertheless some cultivars exhibited nonsignificant mean differences in both irrigation regimes, thus showing higher stress tolerance. The WSSI values of seed cotton yield as displayed in bi plot revealed that cultivars CRIS-477, CRIS-483 and CRIS-486 were found highly susceptible to water stress. Cultivars CRIS-476, CRIS-482, CRIS-487 and NIAB-78 were characterized as highly susceptible with minimum production even under optimum irrigation conditions. Cultivar CRIS-9 was moderately tolerant as produced low production. However, cultivars CRIS-485 and CRIS-484 were found highly stress tolerant because of minimum WSSI value and lower stomatal conductance. Negative correlations between water stress and WSSI for seed cotton yield and plant height revealed that any increase in the degree of stress caused a corresponding decrease in WSSI. (author)

Screening Pakistani cotton for drought tolerance

International Nuclear Information System (INIS)

Soomro, M.H.; Markhand, G.S.

2011-01-01

The drought is one of the biggest abiotic stresses for crop production in arid and semi-arid agriculture. Thus it is a challenge for plant scientists to screen and develop the drought tolerant cotton lines. In this study, 31 cotton genotypes/cultivars were evaluated under two irrigation regimes i. e., seven irrigations (Control) and two irrigations (Stress), using split plot design with four replications. The crop growth, yield and some physiological parameters were studied. There were high inter-varietal differences for all the parameters under control as well as drought stress. Although all the varieties for all parameters were significantly affected by drought but however, CRIS-9, MARVI, CRIS-134, CRIS-126, CRIS-337, CRIS-355 and CRIS-377 maintained highest performance for all the parameters studied under high drought conditions. (author)

Predicting deep percolation with eddy covariance under mulch drip irrigation

Science.gov (United States)

Ming, Guanghui; Tian, Fuqiang; Hu, Hongchang

2016-04-01

Water is essential for the agricultural development and ecological sustainability of the arid and semi-arid oasis with rare precipitation input and high evaporation demand. Deep percolation (DP) defined as excess irrigation water percolating below the plant root zone will reduce irrigation water use efficiency (WUE). But the DP was often ignored in mulch drip irrigation (MDI) which has reached the area of 1.6 million hectares in Xinjiang, the northwest of China. In this study DP experiments were conducted at an agricultural experiment station located within an irrigation district in the Tarim River Basin for four cotton growing periods. First it was detected the irrigation water infiltrated into the soil layers below 100cm and the groundwater level responded to the irrigation events well. Then DP below 100cm soil layers was calculated using the soil water balance method with the aid of eddy covariance (with the energy balance closure of 0.72). The negative DP (groundwater contribution to the crop-water use through capillary rising) at the seedling and harvesting stages can reach 77mm and has a good negative correlation with the groundwater level and positive correlation with potential evaporation. During the drip irrigation stage approximately 45% of the irrigation became DP and resulted in the low irrigation WUE of 0.6. The DP can be 164mm to 270mm per year which was positive linearly correlated to irrigation depth and negative linear correlated to irrigation interval. It is better to establish the irrigation schedule with small irrigation depth and given frequently to reduce deep percolation and meet crop needs.

Efeito do manejo da irrigação e de populações de plantas sobre o rendimento do algodoeiro herbáceo Effect of irrigation management and plant population on herbaceous cotton yield

Directory of Open Access Journals (Sweden)

Francisco Assis de Oliveira

1999-12-01

Full Text Available Objetivou-se estudar, num solo aluvial, franco siltoso, no vale do Açu, no Rio Grande do Norte, o efeito do momento da última irrigação e da população de plantas sobre a altura das plantas e a produtividade do algodoeiro herbáceo (Gossypium hirsutum L.r. latifolium Hutch, cultivar Acala del cerro. Os tratamentos foram definidos pelos momentos da última irrigação aos 65, 80, 95 e 110 dias após a emergência e pela população com 30.000, 60.000, 90.000 e 120.000 plantas/ha. Usou-se o delineamento experimental em blocos ao acaso, com parcelas subdivididas, e quatro repetições. A altura das plantas aumentou com o retardamento da última irrigação e com o tamanho das populações. Houve efeito (P In an alluvial soil, silt loam, of Açu valley, in the state of Rio Grande do Norte, Brazil, a research was carried out to study the effect of time of the last irrigation and plant population on yield and plant height of the herbaceous cotton (Gossypium hirsutum L.r. latifolium Hutch cultivar Acala del cerro. Treatments consisted of times of the last irrigation at 65, 80, 95 and 110 days after emergence and populations with 30,000, 60,000, 90,000 and 120,000 plants/ha. The experimental plan was a randomized complete blocks in a split-plot design, with four replications. Delaying time of last irrigation increased height and plant populations. A significant effect (P <= 0.01 of interaction between time of last irrigation and plant population was found for cotton yield. The highest cotton yield (4,090 kg/ha was obtained with the interaction between time of last irrigation at 95 days and in population of 90,000 plants/ha. Irrigation times at 65 and 80 days were considered too early, and at 110 days too late for cotton yields.

Improved methods for irrigation and planting of major crops in waterlogged areas

International Nuclear Information System (INIS)

Kahlown, M.A.; Iqbal, M.; Raoof, A.

2002-01-01

The improved irrigation methods for wheat and cotton were evaluated in the fordwah Eastern Sadigia (South) Irrigation and Drainage Project area, during 1996-97 and 1997-98 cropping seasons, under three water table depths. Irrigation methods for wheat included 70, 95 and 120 cm Beds, with Flat Basin, as a check for comparative evaluation. Cotton had Ridge-planting on the top and side, Bed and Furrow, and Flat Basin as control. These irrigation methods were compared at water table depths of < 1 m, 1-2 and 2-3 m. The wheat variety inqalab-91, and cotton cultivar, CIM-109, were planted during the 3rd week of November and May every year. All the inputs and management practices, such as seed-rate, fertilizer, seeding method, weed control, plant-protection measures, etc. were kept common. The results on cotton indicated maximum water-use efficiency with the Bed and Furrow Method of irrigation Followed by ridge planting. The traditional Flat-planting had the lowest yield and the highest water-consumption, resulting in the minimum water-use efficiency. In harmony with cotton, the Flat Method of planting had maximum water-consumption. For wheat crop, the water-use efficiency was in descending order, with 120, 95 and 70 cm for Bed and Flat Methods. Bed planting of 95 cm had a fairly high water-use efficiency and yields were more were more comparable than Flat planting. This method had a high level of adaptabilities, especially when the groundwater was close to the root-zone and higher possibilities, especially when the groundwater was close to the root-zone and higher possibility of crop-submergence are existent during rainy spells. The results of the investigation strongly favoured the Bed and furrow methods to irrigate cotton and wheat. However, under well-drained soil conditions, Bed planting of wheat is not recommended. (author)

Measuring efficiency of cotton cultivation in Pakistan: a restricted production frontier study.

Science.gov (United States)

Watto, Muhammad Arif; Mugera, Amin

2014-11-01

Massive groundwater pumping for irrigation has started lowering water tables rapidly in different regions of Pakistan. Declining water tables have thus prompted research efforts to improve agricultural productivity and efficiency to make efficient use of scarce water resources. This study employs a restricted stochastic production frontier to estimate the level of, and factors affecting, technical efficiency of groundwater-irrigated cotton farms in the Punjab province of Pakistan. The mean technical efficiency estimates indicate substantial technical inefficiencies among cotton growers. On average, tube-well owners and water buyers can potentially increase cotton production by 19% and 28%, respectively, without increasing the existing input level. The most influential factors affecting technical efficiency positively are the use of improved quality seed, consultation with extension field staff and farmers' perceptions concerning the availability of groundwater resources for irrigation in the future. This study proposes that adopting improved seed for new cotton varieties and providing better extension services regarding cotton production technology would help to achieve higher efficiency in cotton farming. Within the context of falling water tables, educating farmers about the actual crop water requirements and guiding them about groundwater resource availability may also help to achieve higher efficiencies. © 2014 Society of Chemical Industry. © 2014 Society of Chemical Industry.

Water quality of surface runoff and lint yield in cotton under furrow irrigation in Northeast Arkansas.

Science.gov (United States)

Adviento-Borbe, M Arlene A; Barnes, Brittany D; Iseyemi, Oluwayinka; Mann, Amanda M; Reba, Michele L; Robertson, William J; Massey, Joseph H; Teague, Tina G

2018-02-01

Use of furrow irrigation in row crop production is a common practice through much of the Midsouth US and yet, nutrients can be transported off-site through surface runoff. A field study with cotton (Gossypium hirsutum, L.) was conducted to understand the impact of furrow tillage practices and nitrogen (N) fertilizer placement on characteristics of runoff water quality during the growing season. The experiment was designed as a randomized complete block design with conventional (CT) and conservation furrow tillage (FT) in combination with either urea (URN) broadcast or 32% urea ammonium nitrate (UAN) injected, each applied at 101kgNha -1 . Concentrations of ammonium (NH 4 -N), nitrate (NO 3 -N), nitrite (NO 2 -N), and dissolved phosphorus (P) in irrigation runoff water and lint yields were measured in all treatments. The intensity and chemical form of nutrient losses were primarily controlled by water runoff volume and agronomic practice. Across tillage and fertilizer N treatments, median N concentrations in the runoff were water. Water pH, specific electrical conductivity, alkalinity and hardness were within levels that common to local irrigation water and less likely to impair pollution in waterways. Lint yields averaged 1111kgha -1 and were higher (P-value=0.03) in FT compared to CT treatments. Runoff volumes across irrigation events were greater (P-value=0.02) in CT than FT treatments, which increased NO 3 -N mass loads in CT treatments (394gNO 3 -Nha -1 season -1 ). Nitrate-N concentrations in CT treatments were still low and pose little threat to N contaminations in waterways. The findings support the adoption of conservation practices for furrow tillage and N fertilizer placement that can reduce nutrient runoff losses in furrow irrigation systems. Published by Elsevier B.V.

Coordinated research project of the use of nuclear and related techniques in assessment of irrigation schedules of field crops to increase effective use of water in irrigation projects

International Nuclear Information System (INIS)

Anac, M.S.; Tuzel, I.H.; Anac, D.

1995-01-01

The study aimed at determining the followings; water consumptions. irrigation water requirements of new cotton variety N 84; specific growth stages of cotton which are less sensitive to stress so that the irrigation could be avoided without significant yield decrease; and interactions between deficit irrigation and nitrogen fertilizer use. The experiment was set up with 6 irrigation and three nitrogen fertilizer (0.60 , 120 kg.ha sup -1 ) treatments. The irrigation treatments employed single stress at vegetative, flowering and boll formation stages, in addition to full irrigation, continuous stress and the traditional practice. In stress conditions available soil water depleted to 75 - 80 %, whereas in normal irrigation the depletion was 40 % in 0.90 m. of root zone. In full irrigation treatment 8 irrigations were applied, whereas 3 or 4 irrigations were needed in continuous stress conditions. The number of irrigations were 6 or 7 for other stress treatments. Irrigation water applications varied form 424 to 751 mm. Seasonal ET were ranged between 659 and 899 mm. The highest monthly ET in august for all of the treatments. Daily ET were found to vary from 2.2 to 12.1 mm/day. The seed cotton yields, ky values and yield - N indices have indicated that the vegetative state was more sensitive to water stress. The stress at boll formation stage had slight effects on these parameters. Under limited water resource conditions, vegetative growth period of cotton should be given preference for irrigation, followed by flowering period. Omitting irrigation in boll formation period would result in 4.3 to 9.1 % water savings. Yield changes with respect to N rates showed that high N doses are accompanied by high yields. Nitrogen recoveries either from fertilizers or soil revealed high uptakes in full irrigation conditions. Nitrogen use efficiencies were also high in these conditions. Average of three years put forth that 19% of N in stress conditions and 29% in full irrigation were

Fourier-transform imaging of cotton and botanical and field trash mixtures

Science.gov (United States)

Botanical and field cotton trash comingled with cotton lint can greatly reduce the marketability and quality of cotton. Trash can be found comingled with cotton lint during harvesting, ginning, and processing, thus this study is of interest. Attenuated Total Reflectance-Fourier Transform Infrared (A...

Infrared thermometry: a remote sensing technique for predicting yield in water-stressed cotton

International Nuclear Information System (INIS)

Pinter, P.J.; Fry, K.E.; Guinn, G.; Mauney, J.R.

1983-01-01

A crop water stress index (CWSI) was derived from air temperatures, air vapor pressure deficits and the midday radiant leaf temperatures of cotton plants that were exposed to different early-season irrigation treatments at Phoenix, AZ, U.S.A. To calculate the CWSI, an infrared thermometer was used to measure leaf temperatures which were then scaled relative to minimum and maximum temperatures expected for no-stress (CWSI=0) and extreme drought-stress conditions (CWSI=1). Results showed the CWSI behaved as expected, dropping to low levels following an irrigation and increasing gradually as the cotton plants depleted soil moisture reserves. The final yield of seed cotton was significantly inversely correlated with the average CWSI observed over the interval from the appearance of the first square until two weeks following the final irrigation

Technical- and environmental-efficiency analysis of irrigated cotton-cropping systems in Punjab, Pakistan using data envelopment analysis.

Science.gov (United States)

Ullah, Asmat; Perret, Sylvain R

2014-08-01

Cotton cropping in Pakistan uses substantial quantities of resources and adversely affects the environment with pollutants from the inputs, particularly pesticides. A question remains regarding to what extent the reduction of such environmental impact is possible without compromising the farmers' income. This paper investigates the environmental, technical, and economic performances of selected irrigated cotton-cropping systems in Punjab to quantify the sustainability of cotton farming and reveal options for improvement. Using mostly primary data, our study quantifies the technical, cost, and environmental efficiencies of different farm sizes. A set of indicators has been computed to reflect these three domains of efficiency using the data envelopment analysis technique. The results indicate that farmers are broadly environmentally inefficient; which primarily results from poor technical inefficiency. Based on an improved input mix, the average potential environmental impact reduction for small, medium, and large farms is 9, 13, and 11 %, respectively, without compromising the economic return. Moreover, the differences in technical, cost, and environmental efficiencies between small and medium and small and large farm sizes were statistically significant. The second-stage regression analysis identifies that the entire farm size significantly affects the efficiencies, whereas exposure to extension and training has positive effects, and the sowing methods significantly affect the technical and environmental efficiencies. Paradoxically, the formal education level is determined to affect the efficiencies negatively. This paper discusses policy interventions that can improve the technical efficiency to ultimately increase the environmental efficiency and reduce the farmers' operating costs.

76 FR 32067 - Common Crop Insurance Regulations; Extra Long Staple Cotton Crop Provisions

Science.gov (United States)

2011-06-03

... ``Any AUP cotton'' and replacing it with the phrase ``Mature AUP cotton'' to clarify the AUP cotton must be mature in order to calculate a conversion factor between AUP cotton and ELS cotton. List of... dividing Price A by 85 percent of Price B. * * * * * (f) Mature AUP cotton harvested or appraised from...

Management of poor quality irrigation water

International Nuclear Information System (INIS)

Change, M.H.; Leghari, A.M.; Sipio, Q.A.

2000-01-01

The effect of poor quality drainage effluent on moderately saline sodic, medium textured soil at different growth stages of wheat and cotton is reported. The irrigation treatments were: I) All canal irrigations, II) one irrigation of 75 mm with saline drainage effluent (EC = 3 dS m1) after four weeks sowing of the crop, III) one irrigation of 75 mm with saline drainage effluent after seven weeks sowing of the crop, and IV) one irrigation of 75 mm with saline drainage effluent after ten weeks sowing of the crop. The treatments receiving saline water gave significant decrease in crop yields as compared to canal irrigation treatment. The higher yield of wheat and seed cotton was recorded T1 followed by T2, T3 and T4. The trend of produce was T1< T2< T3< T4 respectively. Electrical conductivity of the soil (Ece) in T1 was decreased and in other three treatments was increased, whereas, pH decreased in T1 and T2. The SAR of soil decreased in all the treatments as compared with initial values. Treatment receiving an irrigation with saline water after four weeks of sowing (T2) was better in reducing soil salinity as compared to treatments receiving such water after 7 or 10 weeks os sowing. Poor quality water (EC = 3 d Sm/sup -1/) can be managed for irrigation after four weeks of swing of crops provided certain soil and water management practices like good seed bed preparation and proper drainage measures are adopted. (author)

Analysis of water footprints of rainfed and irrigated crops in Sudan

Directory of Open Access Journals (Sweden)

Shamseddin Musa Ahmed

2011-12-01

Full Text Available Water rather than land is the limiting factor for crop production in Sudan. This study attempts to use the water footprint (WFP and virtual water concepts to account for crops water consumption under the Sudanese rainfed and irrigated conditions. The general average of the green WFP of sorghum and millet were found to be about 7700 and 10700 m3 ton-1, respectively. According to experimental results at three different climates, in-situ rainwater harvesting techniques could reduce the WFP of rainfed sorghum by 56% on the average. The blue component (surface water shows the highest contribution to the total WFP of irrigated crops: 88% for cotton, 70% for sorghum, 68% for groundnut and 100% for wheat. However, the role of the green water (rainwater is not marginal since it largely influences the operation and maintenance (silt clearance of the gravity-fed irrigation system. Under normal conditions, the annual total virtual water demand of sorghum (the dominant food crop in Sudan is found to be 15 km3, of which 91% is green water. During a dry year, however, Sudan could experience a deficit of 2.3 km3 of water, necessitating the adoption of a wise food stocking-exporting policy.

[Effects of drip irrigation with plastic mulching on the net primary productivity, soil heterotrophic respiration, and net CO2 exchange flux of cotton field ecosystem in Xinjiang, Northwest China].

Science.gov (United States)

Li, Zhi-Guo; Zhang, Run-Hua; Lai, Dong-Mei; Yan, Zheng-Yue; Jiang, Li; Tian, Chang-Yan

2012-04-01

In April-October, 2009, a field experiment was conducted to study the effects of drip irrigation with plastic mulching (MD) on the net primary productivity (NPP), soil heterotrophic respiration (Rh) , and net CO2 exchange flux (NEF(CO2)) of cotton field ecosystem in Xinjiang, taking the traditional flood irrigation with no mulching (NF) as the control. With the increasing time, the NPP, Rh, and NEF(CO2) in treatments MD and NF all presented a trend of increasing first and decreased then. As compared with NF, MD increased the aboveground and belowground biomass and the NPP of cotton, and decreased the Rh. Over the whole growth period, the Rh in treatment MD (214 g C x m(-2)) was smaller than that in treatment NF (317 g C x m(-2)), but the NEF(CO2) in treatment MD (1030 g C x m(-2)) was higher than that in treatment NF (649 g C x m(-2)). Treatment MD could fix the atmospheric CO2 approximately 479 g C x m(-2) higher than treatment NF. Drip irrigation with plastic mulching could promote crop productivity while decreasing soil CO2 emission, being an important agricultural measure for the carbon sequestration and emission reduction of cropland ecosystems in arid area.

Women cotton pickers perceptions about health hazards due to pesticide use in irrigated punjab

International Nuclear Information System (INIS)

Abbas, M.; Mehmood, I.; Bashir, A.; Hassan, S.

2015-01-01

In Pakistan, cotton crop has special importance from the perspective of largest employment generation both for males and females in the production and value chains. Cotton picking is primarily a female specific activity in all cropping zones of Pakistan. Women cotton pickers mostly belong to poor rural society involved in this labour force to feed their families. Cotton pickers in Pakistan face some serious health related problems due to heavy use of pesticides on cotton crop. The present study was designed to investigate the problem faced by women cotton pickers and their role in household decision making. Overall 150 women cotton pickers were interviewed from Bahawalnagar, Sahiwal and Vehari districts of cotton-wheat zone of the Punjab. Summary statistics of women cotton pickers' showed mean average age was 33 years and had 2.4 ears of formal schooling and 10 years of cotton picking experience. The main reasons for cotton picking reported were to reduce family financial burden (30%) followed by better access to food and resource (23%) and better education of children (21%). Majority of the respondents (97.33%) reported that the mode of payments of cotton picking was in cash and the most of the respondents (83.70%) reported that they got wages in time. Only few respondents (8.70%) were aware of health hazards due to pesticides and only 10% women wear protective clothes during cotton picking. Majority of the respondents (76%) wash their clothes after cotton picking whereas almost all the respondents wash their hand after cotton picking. The women cotton pickers faced health problem, tiredness (54.5%), mental disturbance (9.90%) and fatigue (8.00%). More than 58% women reported their involvement in household decision making regarding food and groceries while 30.6% women involved in decision about education of children. It is suggested that the female cotton pickers should be educated about the importance (in terms of disease treatment and long-run health costs

Eficiência da colheita mecânica em variedades paulistas de algodeiro Efficiency of mechanical harvesting in São Paulo cotton varieties

Directory of Open Access Journals (Sweden)

Luiz Henrique Carvalho

1984-01-01

Full Text Available O comportamento das variedades paulistas de algodoeiro 'IAC 17' e 'IAC 18', em face da colheita mecânica, e a possibilidade de melhorá-lo mediante o uso do regulador de crescimento Cycocel, foram estudados em ensaio conduzido em 1978/79 e 1979/80 no município de Leme (SP. Na média dos dois anos, utilizando-se uma colhedeira John Deere 9900, foi colhido cerca de 89% do algodão produzido, o que representa eficiência comparável à obtida em países que adotam predominantemente essa prática. Em condições normais, as perdas foram 7%, porém, em ano adverso, com chuvas freqüentes na época da colheita e longa permanência do algodão aberto no campo, atingiram 16%. A colheita mecânica proporcionou tipos inferiores de algodão em caroço, situando-se entre 1 e 2 pontos, na escala de classificação comercial, a diferença em relação à colheita manual. As perdas foram maiores, cerca de 2%, para a variedade 'IAC 17', tendo a diferença se manifestado tanto em relação ao algodão caído ao solo, quanto ao que persistiu nas plantas, após a colheita. O prejuízo no tipo foi semelhante para as duas variedades, no ano normal, mas consideravelmente maior para a 'IAC 17', no ano desfavorável. O Cycocel, aplicado na base de 50g de princípio ativo por hectare, aumentou a porcentagem de algodão colhido pela máquina, porém, apenas no ano em que as condições climáticas foram adversas. Todavia, mesmo nesse ano, o produto não contribuiu para melhorar o tipo do algodão colhido mecanicamente. Excetuando tendência para queda na resistência, assim mesmo de forma inconsistente, as demais características tecnológicas da fibra não foram afetadas pela colheita mecânica.Adequacy of the cultivated cotton varieties 'IAC 17' and 'IAC 18' for mechanical harvesting and the possibility to improve their performance by using the plant growth regulator Cycocel, were studied at Leme, State of São Paulo, Brazil, in the 1978/79 and 1979/80 crop seasons

75 FR 70850 - Common Crop Insurance Regulations; Extra Long Staple Cotton Crop Provisions

Science.gov (United States)

2010-11-19

... dividing Price A by 85 percent of Price B. * * * * * (f) Any AUP cotton harvested or appraised from acreage... dividing the price per pound for AUP cotton by the price per pound for ELS cotton. The prices used for AUP...

Performance evaluation of drip-fertigated cotton grown under different plant densities using nuclear techniques

International Nuclear Information System (INIS)

Janat, M.; Kalhout, A.

2007-04-01

Field experiment was conducted over two growing seasons to assess different planting densities of cotton variety Aleppo 118 (71.000, 57.000, 48.000, 41.000, 33.500 plants /ha), and two irrigation systems; one irrigation line per one planting row and one irrigation line per two planting rows. Nitrogen fertilizer (120 kg N/ha) as Urea (46% N) was injected through the irrigation system in six equally split applications. A labeled area (1.0 m 2 ) was established for the labeled sub plots and labeled Urea was applied to the labeled sub plots in the same manner as for unlabeled N fertilizer. Irrigation scheduling was accomplished using the direct method of neutron scattering technique. Irrigation was determined when the soil moisture content in the active root depth reached almost 80% of the field capacity. The amount of water applied for one line / one row were 6738 and 9149 m 3 /ha, whereas, for one line/two rows were 7489 and 12653 m 3 / ha for the two growing seasons 2004 and 2005 respectively. The objectives of the experiment were to evaluate the effect of different planting densities and two irrigation system on cotton yield, lint properties, dry matter yield, N-uptake, chlorophyll content and leaf area. The experimental design was randomized block design with 6 replications for each irrigation method. Results revealed that no significant differences between all different plant densities were recorded for all growth parameters tested in this study such as seed cotton yield, dry matter yield, lint properties, chlorophyll content and leaf area.(author)

Fourier transform infrared macro-imaging of botanical cotton trash

Science.gov (United States)

The marketability of cotton fiber is directly tied to the trash comingled with it. Trash can contaminate cotton during harvesting, ginning, and processing. Thus, the removal of trash is important from field to fabric. An ideal prerequisite to removing trash from lint is identifying what trash types...

Yield response and economics of shallow subsurface drip irrigation systems

Science.gov (United States)

Field tests were conducted using shallow subsurface drip irrigation (S3DI) on cotton (Gossypium hirsutum, L.), corn (Zea mays, L.), and peanut (Arachis hypogeae, L.) in rotation to investigate yield potential and economic sustainability of this irrigation system technique over a six year period. Dri...

Crop residue inventory estimates for Texas High Plains cotton

Science.gov (United States)

Interest in the use of cotton crop by-products for the production of bio-fuels and value-added products is increasing. Research documenting the availability of cotton crop by-products after machine harvest is needed. The objectives of this work were to document the total biomass production for moder...

Effects of rotation of cotton (Gossypium hirsutum L.) and soybean [Glycine max (L.) Merr.] crops on soil fertility in Elizabeth, Mississippi, USA

OpenAIRE

H.A., Reddy, K. and Pettigrew, W.T.

2018-01-01

The effects of cotton (Gossypium hirsutum L.): soybean [Glycine max (L.) Merr.] rotation on the soil fertility levels are limited. An irrigated soybean: cotton rotation experiment was conducted from 2012 through 2015 near Elizabeth, Mississippi, USA. The crop rotation sequences were included continuous cotton (CCCC), continuous soybean (SSSS), cotton-soybean-cotton-soybean (CSCS), cotton-soybean-soybean-cotton (CSSC), soybean-cotton-cotton-soybean (SCCS), soybean-cotton-soybean-cotton (SCSC)....

Thwarting one of cotton's nemeses

International Nuclear Information System (INIS)

Senft, D.

1991-01-01

There's not much good to be said for the pink bollworm, cotton's most destructive pest, except that it is being controlled to cut crop damage. Scientists have developed strategies, such as increasing native populations of predatory insects and pest-resistant cotton varieties. Thanks to research, growers today can also use cultural practices such as early plowdown of harvested cotton to break up stalks and bury overwintering pink bollworms. And they can disrupt normal mating by releasing sterile insects and using copies of natural compounds, called pheromones, that the pink bollworm uses to attract mates. Such strategies, together with judicious use of insecticides, put together in various combinations, form what is called an integrated pest management system

Impacts of Ridge-Furrow Planting on Salt Stress and Cotton Yield under Drip Irrigation

Directory of Open Access Journals (Sweden)

Chitao Sun

2017-01-01

Full Text Available Flat (F, mini-ditch (MD, and ridge-furrow (RF are three conventional cotton planting patterns that are usually adopted around the world, yet soil and crop responses to these three patterns are poorly studied, as is their suitability for increasing yield for coastal areas in Eastern China. The effects of three planting methods on water and salt dynamics as well as on growth and lint yield of cotton (Gossypium hirsutum L. were investigated in a saline field in Bohai Rim, China, to select the best planting pattern for cultivating coastal saline fields of Eastern China. Soil moisture in the root zone with RF was 11.9% and 12.1% higher than with F and MD, whereas the electrical conductivity of a saturated soil extract (ECe in the root zone with RF was 18.0% and 13.8% lower than with MD and F, respectively, during the growth period, which indicated that RF could efficiently collect rainfall and leach salt in the root zone. After drip irrigation, the infiltration and salt-leaching depth with RF were both deeper than that with F and MD. The stand establishment of MD was the highest (80.3% due to the greenhouse effect from film mulching, and was 12.8% and 4.6% higher than that with F and RF, respectively. Growth indicators and lint yield demonstrated that RF was superior to F and MD because of the higher soil moisture and lower ECe. The lint yield was significantly higher in RF, suggesting that RF can be an optimal planting pattern for agricultural reclamation in similar saline-alkaline areas around the world.

Water footprint of cotton, wheat and rice production in Central Asia

NARCIS (Netherlands)

Martinez-Aldaya, Maite; Munoz, G.; Hoekstra, Arjen Ysbert

2010-01-01

The hydrology of the Aral Sea Basin during the past few decades has been largely determined by the decision to develop irrigated agriculture on a large scale to produce cotton for export in the 1960s. The irrigated area has grown to 8 million hectares, using practically the entire available flow of

Using cotton plant residue to produce briquettes

Energy Technology Data Exchange (ETDEWEB)

Coates, W. [University of Arizona, Tucson, AZ (United States). Bioresources Research Facility

2000-07-01

In Arizona, cotton (Gossypium) plant residue left in the field following harvest must be buried to prevent it from serving as an overwintering site for insects such as the pink bollworm. Most tillage operations employed to incorporate the residue into the soil are energy intensive and often degrade soil structure. Trials showed that cotton plant residue could be incorporated with pecan shells to produce commercially acceptable briquettes. Pecan shell briquettes containing cotton residue rather than waste paper were slightly less durable, when made using equivalent weight mixtures and moisture contents. Proximate and ultimate analyses showed the only difference among briquette samples to be a higher ash content in those made using cotton plant residue. Briquettes made with paper demonstrated longer flame out time, and lower ash percentage, compared to those made with cotton plant residue. (author)

Combined Effects of Irrigation Regime, Genotype, and Harvest Stage Determine Tomato Fruit Quality and Aptitude for Processing into Puree.

Science.gov (United States)

Arbex de Castro Vilas Boas, Alexandre; Page, David; Giovinazzo, Robert; Bertin, Nadia; Fanciullino, Anne-Laure

2017-01-01

Industry tomatoes are produced under a range of climatic conditions and practices which significantly impact on main quality traits of harvested fruits. However, the quality of tomato intended for processing is currently addressed on delivery through color and Brix only, whereas other traits are overlooked. Very few works provided an integrated view of the management of tomato puree quality throughout the chain. To gain insights into pre- and post-harvest interactions, four genotypes, two water regimes, three maturity stages, and two processes were investigated. Field and glasshouse experiments were conducted near Avignon, France, from May to August 2016. Two irrigation regimes were applied: control plants were irrigated in order to match 100% of evapotranspiration (ETP); water deficit (WD) plants were irrigated as control plants until anthesis of the first flowers, then irrigation was reduced to 60 and 50% ETP in field, and glasshouse respectively. Fruits were collected at three stages during ripening. Their color, fresh weight, dry matter content, and metabolite contents were determined before processing. Pericarp cell size was evaluated in glasshouse only. Two laboratory-scaled processing methods were applied before structural and biochemical analyses of the purees. Results outlined interactive effects between crop and process management. WD hardly reduced yield, but increased dry matter content in the field, in contrast to the glasshouse. The puree viscosity strongly depended on the genotype and the maturity stage, but it was disconnected from fruit dry matter content or Brix. The process impact on puree viscosity strongly depended on water supply during fruit production. Moreover, the lycopene content of fresh fruit may influence puree viscosity. This work opens new perspectives for managing puree quality in the field showing that it was possible to reduce water supply without affecting yield and to improve puree quality.

Combined Effects of Irrigation Regime, Genotype, and Harvest Stage Determine Tomato Fruit Quality and Aptitude for Processing into Puree

Directory of Open Access Journals (Sweden)

Alexandre Arbex de Castro Vilas Boas

2017-10-01

Full Text Available Industry tomatoes are produced under a range of climatic conditions and practices which significantly impact on main quality traits of harvested fruits. However, the quality of tomato intended for processing is currently addressed on delivery through color and Brix only, whereas other traits are overlooked. Very few works provided an integrated view of the management of tomato puree quality throughout the chain. To gain insights into pre- and post-harvest interactions, four genotypes, two water regimes, three maturity stages, and two processes were investigated. Field and glasshouse experiments were conducted near Avignon, France, from May to August 2016. Two irrigation regimes were applied: control plants were irrigated in order to match 100% of evapotranspiration (ETP; water deficit (WD plants were irrigated as control plants until anthesis of the first flowers, then irrigation was reduced to 60 and 50% ETP in field, and glasshouse respectively. Fruits were collected at three stages during ripening. Their color, fresh weight, dry matter content, and metabolite contents were determined before processing. Pericarp cell size was evaluated in glasshouse only. Two laboratory-scaled processing methods were applied before structural and biochemical analyses of the purees. Results outlined interactive effects between crop and process management. WD hardly reduced yield, but increased dry matter content in the field, in contrast to the glasshouse. The puree viscosity strongly depended on the genotype and the maturity stage, but it was disconnected from fruit dry matter content or Brix. The process impact on puree viscosity strongly depended on water supply during fruit production. Moreover, the lycopene content of fresh fruit may influence puree viscosity. This work opens new perspectives for managing puree quality in the field showing that it was possible to reduce water supply without affecting yield and to improve puree quality.

Combined Effects of Irrigation Regime, Genotype, and Harvest Stage Determine Tomato Fruit Quality and Aptitude for Processing into Puree

Science.gov (United States)

Arbex de Castro Vilas Boas, Alexandre; Page, David; Giovinazzo, Robert; Bertin, Nadia; Fanciullino, Anne-Laure

2017-01-01

Industry tomatoes are produced under a range of climatic conditions and practices which significantly impact on main quality traits of harvested fruits. However, the quality of tomato intended for processing is currently addressed on delivery through color and Brix only, whereas other traits are overlooked. Very few works provided an integrated view of the management of tomato puree quality throughout the chain. To gain insights into pre- and post-harvest interactions, four genotypes, two water regimes, three maturity stages, and two processes were investigated. Field and glasshouse experiments were conducted near Avignon, France, from May to August 2016. Two irrigation regimes were applied: control plants were irrigated in order to match 100% of evapotranspiration (ETP); water deficit (WD) plants were irrigated as control plants until anthesis of the first flowers, then irrigation was reduced to 60 and 50% ETP in field, and glasshouse respectively. Fruits were collected at three stages during ripening. Their color, fresh weight, dry matter content, and metabolite contents were determined before processing. Pericarp cell size was evaluated in glasshouse only. Two laboratory-scaled processing methods were applied before structural and biochemical analyses of the purees. Results outlined interactive effects between crop and process management. WD hardly reduced yield, but increased dry matter content in the field, in contrast to the glasshouse. The puree viscosity strongly depended on the genotype and the maturity stage, but it was disconnected from fruit dry matter content or Brix. The process impact on puree viscosity strongly depended on water supply during fruit production. Moreover, the lycopene content of fresh fruit may influence puree viscosity. This work opens new perspectives for managing puree quality in the field showing that it was possible to reduce water supply without affecting yield and to improve puree quality. PMID:29051767

Simulating endosulfan transport in runoff from cotton fields in Australia with the GLEAMS model.

Science.gov (United States)

Connolly, R D; Kennedy, I R; Silburn, D M; Simpson, B W; Freebairn, D M

2001-01-01

Endosulfan (6,7,8,9,10,10-hexachloro-1,5,5a,6,9,9a-hexahydro-6,9methano-2,4,3-benzodioxathiepin 3-oxide), a pesticide that is highly toxic to aquatic organisms, is widely used in the cotton (Gossypium hirsutum L.) industry in Australia and is a risk to the downstream riverine environment. We used the GLEAMS model to evaluate the effectiveness of a range of management scenarios aimed at minimizing endosulfan transport in runoff at the field scale. The field management scenarios simulated were (i) Conventional, bare soil at the beginning of the cotton season and seven irrigations per season; (ii) Improved Irrigation, irrigation amounts reduced and frequency increased to reduce runoff from excess irrigation; (iii) Dryland, no irrigation; (iv) Stubble Retained, increased soil cover created by retaining residue from the previous crop or a specially planted winter cover crop; and (v) Reduced Sprays, a fewer number of sprays. Stubble Retained was the most effective scenario for minimizing endosulfan transport because infiltration was increased and erosion reduced, and the stubble intercepted and neutralized a proportion of the applied endosulfan. Reducing excess irrigation reduced annual export rates by 80 to 90%, but transport in larger storm events was still high. Reducing the number of pesticide applications only reduced transport when three or fewer sprays were applied. We conclude that endosulfan transport from cotton farms can be minimized with a combination of field management practices that reduce excess irrigation and concentration of pesticide on the soil at any point in time; however, discharges, probably with endosulfan concentrations exceeding guideline values, will still occur in storm events.

Rainwater deficit and irrigation demand for row crops in Mississippi Blackland Prairie

Science.gov (United States)

Gary Feng; Ying Ouyang; Ardeshir Adeli; John Read; Johnie Jenkins

2018-01-01

Irrigation research in the mid-south United States has not kept pace with a steady increase in irrigated area in recent years. This study used rainfall records from 1895 to 2016 to determine rainwater deficit and irrigation demand for soybean [Glycine max (L.) Merr.], corn (Zea mays L.), and cotton (Gossypium hirsutum L.) in the Blackland Prairie region of Mississippi...

Irrigated cotton grown on sierozem soils in South Kazakhstan

Science.gov (United States)

The Gloldnaya steppe has large areas of fertile sierozem soils that are important for crop production and its accompanying economic development. The soils are fertile loams but because of the steppe’s dry environment, they need to be irrigated. Our objective was to study irrigation management of cot...

Yield components and quality of intercropped cotton in response to mepiquat chloride and plant density

NARCIS (Netherlands)

Mao, Lili; Zhang, Lizhen; Evers, J.B.; Werf, van der Wopke; Liu, Shaodong; Zhang, Siping; Wang, Baomin; Li, Zhaohu

2015-01-01

Cotton yield is greatly improved by moderately increasing plant density and modifying the cotton plants to have a compact structure, which is also required by the increasing demand for mechanized harvest. However, in cotton strip intercropped with wheat, only limited knowledge on yield response

Enzyme Activities as Sensitive Indicators of Changes in Soil Metabolic Functioning in Alternative Management for Continuous Cotton

Science.gov (United States)

Cotton production practices in the Texas High Plains (THP) region have involved monocultures, heavy irrigation, and conventional tillage since 1940, which must have contributed to the soil erosion and degradation observed in soils. Within the past 10 years, alternative cotton cropping management pra...

Is the Revitalisation of Smallholder Irrigation Schemes (RESIS ...

African Journals Online (AJOL)

2013-09-30

Sep 30, 2013 ... including rainwater harvesting, flood recession, flood water spreading, river ... Smallholder irrigation systems can comprise farmers who use shared or ...... on Irrigation and Drainage, 15-17 November 2006, Aventura. Swadini.

Chemical properties of a Haplustalf soil under irrigation with treated wastewater and nitrogen fertilization

Directory of Open Access Journals (Sweden)

Leda V. B. D. Silva

2016-04-01

Full Text Available ABSTRACT The objective of this research was to investigate the effects of irrigation with treated wastewater and nitrogen (N fertilization on the chemical characteristics of a Haplustalf soil cultivated with cotton. An experiment was conducted in a greenhouse in a completely randomized design with four replicates, and arranged in a 5 x 4 factorial. Five doses of N fertilization (0, 45, 90, 135 and 180 kg ha-1 and four sources of irrigation water (freshwater, wastewater treated by an anaerobic reactor, wastewater treated by an anaerobic reactor and post-treated by intermittent sand filter in series, wastewater treated in a septic tank and post-treated by an intermittent sand filter were tested. Irrigation was daily performed from July 2011 to January 2012 according to the water demand of cotton resulting in a water depth of 620 mm. It was found that, compared with the conventional management with freshwater irrigation, treated wastewater provides greater accumulation of micronutrient, potassium and sodium in the soil, increasing the risk of sodification in irrigated areas.

Satellite-based monitoring of cotton evapotranspiration

Science.gov (United States)

Dalezios, Nicolas; Dercas, Nicholas; Tarquis, Ana Maria

2016-04-01

Water for agricultural use represents the largest share among all water uses. Vulnerability in agriculture is influenced, among others, by extended periods of water shortage in regions exposed to droughts. Advanced technological approaches and methodologies, including remote sensing, are increasingly incorporated for the assessment of irrigation water requirements. In this paper, remote sensing techniques are integrated for the estimation and monitoring of crop evapotranspiration ETc. The study area is Thessaly central Greece, which is a drought-prone agricultural region. Cotton fields in a small agricultural sub-catchment in Thessaly are used as an experimental site. Daily meteorological data and weekly field data are recorded throughout seven (2004-2010) growing seasons for the computation of reference evapotranspiration ETo, crop coefficient Kc and cotton crop ETc based on conventional data. Satellite data (Landsat TM) for the corresponding period are processed to estimate cotton crop coefficient Kc and cotton crop ETc and delineate its spatiotemporal variability. The methodology is applied for monitoring Kc and ETc during the growing season in the selected sub-catchment. Several error statistics are used showing very good agreement with ground-truth observations.

Water Use Efficiency in Saline Soils under Cotton Cultivation in the Tarim River Basin

Directory of Open Access Journals (Sweden)

Xiaoning Zhao

2015-06-01

Full Text Available The Tarim River Basin, the largest area of Chinese cotton production, is receiving increased attention because of serious environmental problems. At two experimental stations (Korla and Aksu, we studied the influence of salinity on cotton yield. Soil chemical and physical properties, soil water content, soil total suction and matric suction, cotton yield and water use efficiency under plastic mulched drip irrigation in different saline soils was measured during cotton growth season. The salinity (mS·cm−1 were 17–25 (low at Aksu and Korla, 29–50 (middle at Aksu and 52–62 (high at Aksu for ECe (Electrical conductivity measured in saturation-paste extract of soil over the 100 cm soil profile. The soil water characteristic curves in different saline soils showed that the soil water content (15%–23% at top 40 cm soil, lower total suction power (below 3500 kPa and lower matric suction (below 30 kPa in low saline soil at Korla had the highest water use efficiency (10 kg·ha−1·mm−1 and highest irrigation water use efficiency (12 kg·ha−1·mm−1 and highest yield (6.64 t·ha−1. Higher water content below 30 cm in high saline soil increased the salinity risk and led to lower yield (2.39 t·ha−1. Compared to low saline soils at Aksu, the low saline soil at Korla saved 110 mm irrigation and 103 mm total water to reach 1 t·ha−1 yield and increased water use efficiency by 5 kg·ha−1·mm−1 and 7 kg·ha−1·mm−1 for water use efficiency (WUE and irrigation water use efficiency (IWUE respectively.

Irrigation Analysis Based on Long-Term Weather Data

Directory of Open Access Journals (Sweden)

James R. Mahan

2016-08-01

Full Text Available Irrigation management is based upon delivery of water to a crop in the correct amount and time, and the crop’s water need is determined by calculating evapotranspiration (ET using weather data. In 1994, an ET-network was established in the Texas High Plains to manage irrigation on a regional scale. Though producers used the ET-network, by 2010 public access was discontinued. Why did producers allow a valuable irrigation-management tool to be eliminated? Our objective was to analyze the effect of declining well capacities on the usefulness of cotton ET (ETc for irrigation. Thirty years (1975–2004 of daily ETc data were used to compare irrigation demand vs. irrigation responses at four locations, analyzed for multiple years and range of well capacities for three irrigation-intervals. Results indicated that when well capacities declined to the point that over-irrigation was not possible, the lower well capacities reduced the value of ETc in terms of the number of irrigations and total amount of water applied. At well capacities <1514 L·min−1 the fraction of irrigations for which ETc information was used to determine the irrigation amount was <35% across years and irrigation intervals. The value of an ETc-based irrigation may fall into disuse when irrigation-water supplies decline.

Precision overhead irrigation is suitable for several Central Valley crops

Directory of Open Access Journals (Sweden)

Jeffrey P. Mitchell

2016-04-01

Full Text Available Overhead systems are the dominant irrigation technology in many parts of the world, but they are not widely used in California even though they have higher water application efficiency than furrow irrigation systems and lower labor requirements than drip systems. With water and labor perennial concerns in California, the suitability of overhead systems merits consideration. From 2008 through 2013, in studies near Five Points, California, we evaluated overhead irrigation for wheat, corn, cotton, tomato, onion and broccoli as an alternative to furrow and drip irrigation. With the exception of tomato, equal or increased yields were achieved with overhead irrigation. Many variables are involved in the choice of an irrigation system, but our results suggest that, with more research to support best management practices, overhead irrigation may be useful to a wider set of California farmers than currently use it.

Remote sensing techniques for monitoring the Rio Grande Valley cotton stalk destruction program

Energy Technology Data Exchange (ETDEWEB)

Richardson, A.J.; Gerbermann, A.H.; Summy, K.R.; Anderson, G.L. (Department of Agriculture, Weslaco, TX (United States))

1993-09-01

Post harvest cotton (Gossypium hirsutum L.) stalk destruction is a cultural practice used in the Rio Grande Valley to suppress over wintering populations of boll weevils (Anthonomus grandis Boheman) without using chemicals. Consistent application of this practice could substantially reduce insecticide usage, thereby minimizing environmental hazards and increasing cotton production profits. Satellite imagery registered within a geographic information system was used to monitor the cotton stalk destruction program in the Rio Grande Valley. We found that cotton stalk screening procedures based on standard multispectral classification techniques could not reliably distinguish cotton from sorghum. Greenness screening for cotton plant stalks after the stalk destruction deadline was possible only where ground observations locating cotton fields were available. These findings indicate that a successful cotton stalk destruction monitoring program will require satellite images and earth referenced data bases showing cotton field locations.

Efficacy of Cotton Root Destruction and Winter Cover Crops for Suppression of Hoplolaimus columbus.

Science.gov (United States)

Davis, R F; Baird, R E; McNeil, R D

2000-12-01

The efficacy of rye (Secale cereale) and wheat (Triticum aestivum) winter cover crops and cotton stalk and root destruction (i.e., pulling them up) were evaluated in field tests during two growing seasons for Hoplolaimus columbus management in cotton. The effect of removing debris from the field following root destruction also was evaluated. Wheat and rye produced similar amounts of biomass, and both crops produced more biomass (P Cover crops did not suppress H. columbus population levels or increase subsequent cotton yields. Cotton root destruction did not affect cotton stand or plant height the following year. Cotton root destruction lowered (P rye or wheat cover crop or cotton root destruction following harvest is ineffective for H. columbus management in cotton.

Development of secondary cell wall in cotton fibers as examined with Fourier transform-infrared spectroscopy

Science.gov (United States)

Our presentation will focus on continuing efforts to examine secondary cell wall development in cotton fibers using infrared Spectroscopy. Cotton fibers harvested at 18, 20, 24, 28, 32, 36 and 40 days after flowering were examined using attenuated total reflection Fourier transform-infrared (ATR FT-...

Non-cellulosic polysaccharides from cotton fibre are differently impacted by textile processing

DEFF Research Database (Denmark)

Runavot, Jean-Luc; Guo, Xiaoyuan; Willats, William George Tycho

2014-01-01

-cellulosic cotton fibre polysaccharides during different steps of cotton textile processing using GC-MS, HPLC and comprehensive microarray polymer profiling to obtain monosaccharide and polysaccharide amounts and linkage compositions. Additionally, in situ detection was used to obtain information on polysaccharide......Cotton fibre is mainly composed of cellulose, although non-cellulosic polysaccharides play key roles during fibre development and are still present in the harvested fibre. This study aimed at determining the fate of non-cellulosic polysaccharides during cotton textile processing. We analyzed non...... localization and accessibility. We show that pectic and hemicellulosic polysaccharide levels decrease during cotton textile processing and that some processing steps have more impact than others. Pectins and arabinose-containing polysaccharides are strongly impacted by the chemical treatments, with most being...

Evaluating the effects of mulch and irrigation amount on soil water distribution and root zone water balance using HYDRUS-2D

Science.gov (United States)

Drip irrigation under mulch is a major water-saving irrigation method that has been widely practiced for cotton production. The performance of such irrigation systems should be evaluated for proper design, management, operation, and efficient water use. The modeling approach has been used as a commo...

Some results from a temperature evaluation of a cotton field with infrared thermometer for agricultural use

International Nuclear Information System (INIS)

Ovcharova, A.; Kolev, N.; Nedkov, N.

2005-01-01

The aims of the present study were connected with evaluation of the basic soil properties, distribution of thermal, hydrological and electronic soil properties and criteria for minimization of the measurement points, obtained in the cotton non-irrigated field of the Institute of durum wheat and cotton near Chirpan. It were measured crop temperature of cotton field and soil surface temperature distribution during the main vegetative stages. Using the energy balance equation and soil water balance equation was calculated the intensity of evapotranspiration during the days of measurements

Grain Yield and Water Use Efficiency in Extremely-Late Sown Winter Wheat Cultivars under Two Irrigation Regimes in the North China Plain.

Directory of Open Access Journals (Sweden)

Bin Wang

Full Text Available Wheat production is threatened by water shortages and groundwater over-draft in the North China Plain (NCP. In recent years, winter wheat has been increasingly sown extremely late in early to mid-November after harvesting cotton or pepper. To improve water use efficiency (WUE and guide the extremely late sowing practices, a 3-year field experiment was conducted under two irrigation regimes (W1, one-irrigation, 75 mm at jointing; W2, two-irrigation, 75 mm at jointing and 75 mm at anthesis in 3 cultivars differing in spike size (HS4399, small spike; JM22, medium spike; WM8, large spike. Wheat was sown in early to mid-November at a high seeding rate of 800-850 seeds m(-2. Average yields of 7.42 t ha(-1 and WUE of 1.84 kg m(-3 were achieved with an average seasonal evapotranspiration (ET of 404 mm. Compared with W2, wheat under W1 did not have yield penalty in 2 of 3 years, and had 7.9% lower seasonal ET and 7.5% higher WUE. The higher WUE and stable yield under W1 was associated with higher 1000-grain weight (TGW and harvest index (HI. Among the 3 cultivars, JM22 had 5.9%-8.9% higher yield and 4.2%-9.3% higher WUE than WM8 and HS4399. The higher yield in JM22 was attributed mainly to higher HI and TGW due to increased post-anthesis biomass and deeper seasonal soil water extraction. In conclusion, one-irrigation with a medium-sized spike cultivar JM22 could be a useful strategy to maintain yield and high WUE in extremely late-sown winter wheat at a high seeding rate in the NCP.

Genotypic interactions with potassium nutrition on fruit production in cotton (gossypium hirsutum l.) under irrigated conditions

International Nuclear Information System (INIS)

Makhdum, M.I.; Pervez, H.; Ashraf, M.

2005-01-01

A field experiment was conducted using four (Gossypium hirsutum l.) cultivars (OM-448, OM-I00, NIAB-Karishma, 5-12) at four rates of potassium (0, 62, 5, 125, 250 kg K ha-1) and with two sources of potassium (K/sub 2/S0/sub 4/, KCI) to determine the effects of potassium (K) fertilizer on fruit production under irrigated conditions. Cultivars differed significantly amongst themselves in production and retention of fruits per unit land area. The cultivars were categorized as OM-448>OM-1100>Karishma>5-12 in order of fruit production. The number of total fruiting positions increased with concurrent levels of K-fertilizer. The shedding of fruit was significantly reduced by application of 250 kg K ha-1 compared to zero K-rate treatment. The addition of K-fertilizer in the form of K/sub 2/S0/sub 4/ showed an edge over KCI in fruit production. A high degree of correlation (r 0.89**,0.91**, -0.8**) was measured between seed cotton yield and number of total fruiting positions, number of intact fruit and fruit shedding percentage respectively. (author)

Preliminary evidence of oxidation in standard oven drying of cotton: attenuated total reflectance/ Fourier transform spectroscopy, colorimetry, and particulate matter formation

Science.gov (United States)

Moisture is paramount to cotton fiber properties dictating harvesting, ginning, storage and spinning as well as others. Currently, oven drying in air is often utilized to generate the percentage of moisture in cotton fibers. Karl Fischer Titration another method for cotton moisture, has been compa...

Identification of Decisive Factors Determining the Continued Use of Rainwater Harvesting Systems for Agriculture Irrigation in Beijing

Directory of Open Access Journals (Sweden)

Xiao Liang

2015-12-01

Full Text Available The success or failure of operating a rainwater harvesting system (RWH depends on both technological and non-technological factors. The importance of non-technological factors in attaining sustainable RWH operation is rarely emphasized. This study aims to assess the contribution of non-technological factors through determining decisive factors involved in the use of RWHs for agriculture irrigation in Beijing. The RWHs for agriculture irrigation in Beijing are not operating as well as expected. If the decisive factors are identified to be non-technological, the significance of non-technological factors will be highlighted. Firstly, 10 impact factors comprising non-technological and technological factors are selected according to both a literature review and interviews with RWH managers. Following this, through an artificial data mining method, rough set analysis, the decisive factors are identified. Results show that two non-technological factors, “doubts about rainwater quality” and “the availability of groundwater” determine whether these systems will continue or cease RWH operation in Beijing. It is, thus, considered necessary to improve public confidence in and motivation on using rainwater for agriculture irrigation, as this is the main obstacle in the sustainable and successful operation of RWHs. Through a case study of RWHs in Beijing, the study verifies the importance of acknowledging non-technological factors to achieve sustainable water management and considers that such factors should receive more attention by decision makers and researchers.

Hemispherical photography to estimate biophysical variables of cotton

Directory of Open Access Journals (Sweden)

Ziany N. Brandão

Full Text Available ABSTRACT The Leaf Area Index (LAI is a key parameter to evaluate the vegetation spectral response, estimating plant nutrition and water requirements. However, in large fields is difficult to obtain accurate data to LAI determination. Therefore, the objective of this study was the estimation of LAI, biomass and yield of irrigated cotton through digital hemispherical photography. The treatments consisted of four nitrogen doses (0, 90, 180 and 270 kg ha-1 and four phosphorus doses (0, 120, 240 and 360 kg ha-1. Digital hemispherical photographs were collected under similar sky brightness conditions at 60 and 75 days after emergence (DAE, performed by the Digital Plant Canopy Imager - CI-110® of CID Inc. Biomass and LAI measurements were made on the same dates. LAI was also determined by destructive and non-destructive methods through a leaf area integrator (LI-COR® -LI-3100C model, and by measurements based on the midrib length of all leaves, respectively. The results indicate that the hemispherical images were appropriate to estimate the LAI and biomass production of irrigated cotton, while for the estimation of yield, more research is needed to improve the method.

Use of attenuated total reflection Fourier transform infrared (ATR FT-IR) spectroscopy in direct, non-destructive, and rapid assessment of developmental cotton fibers grown in planta and in culture

Science.gov (United States)

Cotton fibers are routinely harvested from cotton plants (in planta), and their end-use qualities depend on their development stages. Cotton fibers are also cultured at controlled laboratory environments, so that cotton researchers can investigate many aspects of experimental protocols in cotton bre...

Simulation of temporal and spatial distribution of required irrigation water by crop models and the pan evaporation coefficient method

Science.gov (United States)

Yang, Yan-min; Yang, Yonghui; Han, Shu-min; Hu, Yu-kun

2009-07-01

Hebei Plain is the most important agricultural belt in North China. Intensive irrigation, low and uneven precipitation have led to severe water shortage on the plain. This study is an attempt to resolve this crucial issue of water shortage for sustainable agricultural production and water resources management. The paper models distributed regional irrigation requirement for a range of cultivated crops on the plain. Classic crop models like DSSAT- wheat/maize and COTTON2K are used in combination with pan-evaporation coefficient method to estimate water requirements for wheat, corn, cotton, fruit-trees and vegetables. The approach is more accurate than the static approach adopted in previous studies. This is because the combination use of crop models and pan-evaporation coefficient method dynamically accounts for irrigation requirement at different growth stages of crops, agronomic practices, and field and climatic conditions. The simulation results show increasing Required Irrigation Amount (RIA) with time. RIA ranges from 5.08×109 m3 to 14.42×109 m3 for the period 1986~2006, with an annual average of 10.6×109 m3. Percent average water use by wheat, fruit trees, vegetable, corn and cotton is 41%, 12%, 12%, 11%, 7% and 17% respectively. RIA for April and May (the period with the highest irrigation water use) is 1.78×109 m3 and 2.41×109 m3 respectively. The counties in the piedmont regions of Mount Taihang have high RIA while the central and eastern regions/counties have low irrigation requirement.

Guidelines for irrigation scheduling of peach palm for heart-of-palm production in the São Francisco Valley, Brazil

Directory of Open Access Journals (Sweden)

Bassoi Luís Henrique

2003-01-01

Full Text Available The water consumption, crop coefficient and effective rooting depth of the peach palm cultivated in a Vertisol were evaluated over two years and three months, from planting to fifth harvest, in Juazeiro, Bahia State, Brazil. Plants were irrigated by microsprinklers under two irrigation treatments, full irrigation (FI and reduced irrigation (RI, and the amount of water applied in RI corresponded to 75% of that of FI. Water consumption and crop coefficient has increased markedly at the first harvest (7.3 mm day-1 and 1.2, respectively, in FI treatment in the thirteenth month, as a consequence of plant canopy development. After that, plants were harvested every three or four months, and these values varied a little due to decrease of the stand. The effective rooting depth was shallow (40 cm at 12 months (before the first harvest and it remained the same up to 24 months after planting (after the fourth harvest. Significant response of heart-of-palm yield to the irrigation treatments was not observed.

System contemplations for precision irrigation in agriculture

Science.gov (United States)

Schubert, Martin J. W.

2017-04-01

This communication contemplates political, biological and technical aspects for efficient and profitable irrigation in sustainable agriculture. A standard for irrigation components is proposed. The need for many, and three-dimensionally distributed, soil measurement points is explained, thus enabling the control of humidity in selected layers of earth. Combined wireless and wired data transmission is proposed. Energy harvesting and storage together with mechanical sensor construction are discussed.

Simulation Models of Leaf Area Index and Yield for Cotton Grown with Different Soil Conditioners.

Directory of Open Access Journals (Sweden)

Lijun Su

Full Text Available Simulation models of leaf area index (LAI and yield for cotton can provide a theoretical foundation for predicting future variations in yield. This paper analyses the increase in LAI and the relationships between LAI, dry matter, and yield for cotton under three soil conditioners near Korla, Xinjiang, China. Dynamic changes in cotton LAI were evaluated using modified logistic, Gaussian, modified Gaussian, log normal, and cubic polynomial models. Universal models for simulating the relative leaf area index (RLAI were established in which the application rate of soil conditioner was used to estimate the maximum LAI (LAIm. In addition, the relationships between LAIm and dry matter mass, yield, and the harvest index were investigated, and a simulation model for yield is proposed. A feasibility analysis of the models indicated that the cubic polynomial and Gaussian models were less accurate than the other three models for simulating increases in RLAI. Despite significant differences in LAIs under the type and amount of soil conditioner applied, LAIm could be described by aboveground dry matter using Michaelis-Menten kinetics. Moreover, the simulation model for cotton yield based on LAIm and the harvest index presented in this work provided important theoretical insights for improving water use efficiency in cotton cultivation and for identifying optimal application rates of soil conditioners.

Impacts of crop insurance on water withdrawals for irrigation

Science.gov (United States)

Deryugina, Tatyana; Konar, Megan

2017-12-01

Agricultural production remains particularly vulnerable to weather fluctuations and extreme events, such as droughts, floods, and heat waves. Crop insurance is a risk management tool developed to mitigate some of this weather risk and protect farmer income in times of poor production. However, crop insurance may have unintended consequences for water resources sustainability, as the vast majority of freshwater withdrawals go to agriculture. The causal impact of crop insurance on water use in agriculture remains poorly understood. Here, we determine the empirical relationship between crop insurance and irrigation water withdrawals in the United States. Importantly, we use an instrumental variables approach to establish causality. Our methodology exploits a major policy change in the crop insurance system - the 1994 Federal Crop Insurance Reform Act - which imposed crop insurance requirements on farmers. We find that a 1% increase in insured crop acreage leads to a 0.223% increase in irrigation withdrawals, with most coming from groundwater aquifers. We identify farmers growing more groundwater-fed cotton as an important mechanism contributing to increased withdrawals. A 1% increase in insured crop acreage leads to a 0.624% increase in cotton acreage, or 95,602 acres. These results demonstrate that crop insurance causally leads to more irrigation withdrawals. More broadly, this work underscores the importance of determining causality in the water-food nexus as we endeavor to achieve global food security and water resources sustainability.

Crop response to biochar under differing irrigation levels in the southeastern USA

Science.gov (United States)

Application of biochar to soils is hypothesized to increase crop yield. Crop productivity impacts of biochar application in Southeastern cropping systems consisting of peanut (Arachis hypogaea L.), corn (Zea mays L.), and cotton (Gossypium hirsutum L.) produced under varying rates of irrigation have...

ENERGY USE EFFICIENCY AND ECONOMICAL ANALYSIS IN COTTON PRODUCTION SYSTEM IN AN ARID REGION: A CASE STUDY FOR ISFAHAN PROVINCE, IRAN

Directory of Open Access Journals (Sweden)

Mortaza Zahedi

2014-01-01

Full Text Available The objective of this survey was to evaluate the energy consumption and the economic analysis of cotton production in Esfahan province of Iran. For this purpose, data were selected from 47 cotton growers using a face-to-face questionnaire. The results indicate that cotton production consumed a total energy of 52507.8 MJ ha-1. Among sources of input energy, the contribution of energy related to diesel fuel (47% was highest, followed by chemical fertilizers (20% and water for irrigation (12%. The shares of direct and non renewable energy were 68.3% and 77.7%, respectively. The impacts of indirect and non-renewable energy on cotton yield were higher than those of direct and renewable energy. Energy use efficiency, specific energy, energy productivity, energy intensiveness, and net energy were 0.7, 19.2 MJ-1 kg, 0.10 kg MJ-1, 27.2 MJ-1 $ -1, -15625.2 MJ-1ha-1, respectively. Total cost of cotton production was 1927.9 $ ha-1. About 67% of the cost of production was variable costs, while 33% was fixed costs. The benefit to cost ratio was estimated 1.22. It is suggested that efforts to increase energy efficiency of cotton production in the investigated area should primarily focus on proper use of fertilizers and irrigation systems and also on saving diesel fuel by improving machinery operating performance.

MOISTURE IN COTTON BY THE KARL FISCHER TITRATION REFERENCE METHOD

Science.gov (United States)

Moisture is a critical parameter that influences many aspects of cotton fiber from harvesting and ginning to various fiber properties. Because of their importance, reference moisture methods that are more accurate than the existing oven-drying techniques and relatively easy to generate results are ...

Secondary cell wall development in cotton fibers as examined with attenuated total reflection Fourier transform infrared spectroscopy

Science.gov (United States)

Cotton fibers harvested at 18, 20, 24, 28, 32, 36 and 40 days after flowering were examined using attenuated total reflection Fourier transform-infrared (ATR FT-IR) spectroscopy. The selected harvesting points coincide with secondary cell wall (SCW) development in the fibers. Progressive but moderat...

Soil water movement in the unsaturated zone of an inland arid region: Mulched drip irrigation experiment

Science.gov (United States)

Han, Dongmei; Zhou, Tiantian

2018-04-01

Agricultural irrigation with trans-basin water diversion can effectively relieve the water paucity in arid and semi-arid regions, however, this may be accompanied by eco-environmental problems (e.g., saline soils, rising groundwater levels, water quality problems). The mechanism of soil water movement under irrigation in the unsaturated zone of arid regions is a key scientific problem that should be solved in order to evaluate agricultural water management and further improve current irrigation practices. This study investigated the impact of drip irrigation on soil water movement in the unsaturated zone of a cotton field in an inland arid region (the Karamay Agricultural Development Area), northwest China. Combining in situ observational physical data with temporal variation in stable isotopic compositions of soil water, we described the soil water flow system and mechanism in severe (Plot 1) and mild (Plot 2) saline-alkali cotton fields. The infiltration depths are 0-150 cm for both plots. Drip irrigation scheduling makes no significant contribution to local groundwater recharge, however, groundwater can move into the unsaturated zone through capillary rise during cotton flowering and boll periods. Plot 2 is less prone to having secondary soil salinization than Plot 1 due to the existence of a middle layer (approximately 100 cm thick), which elongated the distance between the root zone and aquifer. Rise in the water table (approximately 60 cm for Plot 1 and 50 cm for Plot 2) could be caused by lateral groundwater flow instead of vertical infiltration. We estimated the soil water storage changes in the unsaturated zone and proposed a conceptual model for deciphering the movement process of soil water. This study provides a scientific basis for determining the rise of groundwater levels and potential development of saline soils and improving agricultural water management in arid regions.

Carbon contributions from roots in cotton based rotations

Science.gov (United States)

Tan, D. K. Y.; Hulugalle, N. R.

2012-04-01

Most research on the decline in soil organic carbon (SOC) stocks in Australian cotton farming systems has focussed on the inputs from above-ground crop residues, with contribution from roots being less studied. This paper aims to outline the contribution of cotton roots and roots of other crops to soil carbon stocks in furrow-irrigated Vertisols in several cotton (Gossypium hirsutum L.)-based rotations. Data was collected from cotton-based rotation systems: cotton monoculture, cotton-vetch (Vicia benghalensis) Roth.), cotton-wheat (Triticum aestivum L.), cotton-wheat-vetch, cotton-corn, corn-corn, cotton-sorghum (Sorghum bicolor L.) and from BollgardTM II (Bt) and non-Bt cotton. Land management systems were permanent beds, with or without standing stubble, and conventional tillage. Root growth in the surface 0.10 m was measured with the core-break method, and that in the 0.10 to 1.0 m depth with a minirhizotron and I-CAP image capture system. These measurements were used to derive root C added to soil through intra-seasonal root death (Clost), C in roots remaining at the end of season (Croot), and total root C added to soil (Ctotal = Croot + Clost). Ctotal in non-Bt cotton (Sicot 80RRF, 0.9 t C/ha/year) was higher than in Bt cotton (Sicot 80RRF, 0.6 t C/ha/year). Overall, Ctotal from cotton roots ranges between 0.5 to 5 t C/ha/year, with Clost contributing 25-70%. Ctotal was greater with vetch than with wheat and was in the order of vetch in cotton-wheat-vetch (5.1 t C/ha/year) > vetch in cotton-vetch (1.9 t C/ha/year) > wheat in cotton-wheat (1.6 t C/ha/year) = wheat in cotton-wheat-vetch (1.7 t C/ha/year). Intra-seasonal root mortality accounted for 12% of total root carbon in vetch and 36% in wheat. Average corn Ctotal with monoculture was 9.3 t/ha and with cotton-corn 5.0 t/ha. Ctotal averaged between both treatments was, thus, of the order of 7.7 t C/ha/year and average Clost 0.04 t/ha/yr. Sorghum roots contributed less carbon with conventional tillage (8.2 t

Natural resource management issues of pakistan's agriculture: the cases of land, labour and irrigation

International Nuclear Information System (INIS)

Arifullah, S.A.; Farid, N.

2009-01-01

With the objective to understand the optimization behavior of farmers in allocating land, labor and irrigation water, Linear Programming (LP) analytic technique was applied to 13 Kharif and 7 Rabi crops, using national level data from 1990-2005. The crops included in the analysis have been occupying 80 - 85 percent of Pakistan's cropped area for the last three to four decades. The optimization analysis resulted in bringing up three major natural resource management issues of the Pakistan's crop sector to the forefront. First, Basmati rice, mung, fodders of millet and sorghum, onion and IRRI rice were found optimal Kharif crops relative to sugarcane, maize, maize fodder, millet, sorghum, cotton and tomato. For Rabi wheat, potato, gram, rapeseed and berseem proved to be optimal relative to barley and sugarcane, for this period. The results imply that to have an efficient agriculture base Pakistan should either replace the sub-optimal crops with the optimal ones, or the resource management side of such crops should be improved with the help sensitivity analysis. Second, cotton and tomato appeared to be relatively sensitive to labor availability than other crops; they seemed to establish a direct correlation between the optimality status and labor availability. And third, irrigation emerged as a critical input for IRRI rice in Kharif and for potato and gram in Rabi season; for these crops the crop optimality was directly correlated to the number of irrigations applied. In contrast, its opportunity cost is higher than the per unit return in cotton, tomato, wheat and berseem. This signified that irrigation needs to be managed efficiently in the latter four crops; whereas in the former three crops use of extra water would help in optimizing. (author)

Evaluating gridded crop model simulations of evapotranspiration and irrigation using survey and remotely sensed data

Science.gov (United States)

Lopez Bobeda, J. R.

2017-12-01

The increasing use of groundwater for irrigation of crops has exacerbated groundwater sustainability issues faced by water limited regions. Gridded, process-based crop models have the potential to help farmers and policymakers asses the effects water shortages on yield and devise new strategies for sustainable water use. Gridded crop models are typically calibrated and evaluated using county-level survey data of yield, planting dates, and maturity dates. However, little is known about the ability of these models to reproduce observed crop evapotranspiration and water use at regional scales. The aim of this work is to evaluate a gridded version of the Decision Support System for Agrotechnology Transfer (DSSAT) crop model over the continental United States. We evaluated crop seasonal evapotranspiration over 5 arc-minute grids, and irrigation water use at the county level. Evapotranspiration was assessed only for rainfed agriculture to test the model evapotranspiration equations separate from the irrigation algorithm. Model evapotranspiration was evaluated against the Atmospheric Land Exchange Inverse (ALEXI) modeling product. Using a combination of the USDA crop land data layer (CDL) and the USGS Moderate Resolution Imaging Spectroradiometer Irrigated Agriculture Dataset for the United States (MIrAD-US), we selected only grids with more than 60% of their area planted with the simulated crops (corn, cotton, and soybean), and less than 20% of their area irrigated. Irrigation water use was compared against the USGS county level irrigated agriculture water use survey data. Simulated gridded data were aggregated to county level using USDA CDL and USGS MIrAD-US. Only counties where 70% or more of the irrigated land was corn, cotton, or soybean were selected for the evaluation. Our results suggest that gridded crop models can reasonably reproduce crop evapotranspiration at the country scale (RRMSE = 10%).

INVENTORY OF IRRIGATED RICE ECOSYSTEM USING POLARIMETRIC SAR DATA

Directory of Open Access Journals (Sweden)

P. Srikanth

2012-08-01

Full Text Available An attempt has been made in the current study to assess the potential of polarimetric SAR data for inventory of kharif rice and the major competing crop like cotton. In the process, physical process of the scattering mechanisms occurring in rice and cotton crops at different phonological stages was studied through the use of temporal Radarsat 2 Fine quadpol SAR data. The temporal dynamics of the volume, double and odd bounce, entropy, anisotropy, alpha parameters and polarimertic signatures, classification through isodata clustering and Wishart techniques were assessed. The Wishart (H-a classification showed higher overall as well as rice and cotton crop accuracies compared to the isodata clustering from Freeman 3-component decomposition. The classification of temporal SAR data sets independently showed that the rice crop forecasting can be advanced with the use of appropriate single date polarimetric SAR data rather than using temporal SAR amplitude data sets with the single polarization in irrigated rice ecosystems

Response of cotton, alfalfa, and cantaloupe to foliar-deposited salt in an arid environment

International Nuclear Information System (INIS)

Hofmann, W.C.; Karpiscak, M.M.; Bartels, P.G.

1987-01-01

The cooling towers at the Palo Verde Nuclear Generating Station (PVNGS), located 80 km west of Phoenix, AZ, will release as estimated 2.1 Mg/d of particulates (primarily salts) into the atmosphere when the station is in full operation. The saline drift will disperse and settle onto agricultural fields surrounding the station. Field studies were conducted in 1983 to investigate the influence of foliar-applied saline aerosol on crop growth, foliar injury, and tissue elemental concentration on cotton (Gossypium hirsutum L.), alfalfa (medicago sativa L.), and cantaloupe (Cucumis melo L.) in an arid environment. The treatment aerosol solutions simulated treated wastewater effluent and included all essential plant nutrients and other elements, including trace concentrations of heavy metals. The treatments included unsprayed plots, and plots sprayed with salt solutions at 0 (distilled water), 8, 83, and 415 kg/(ha yr). The alfalfa received an additional 829 kg/(ha yr) treatment. The species were evaluated in separate experiments on Mohave clay loam and Sonoita sandy loam soils (Typic Haplargid) near Marana, AZ. Cotton treated with 415 kg/(ha yr) had significantly less chlorosis and tended to be slightly taller than the cotton in the unsprayed plots. The alfalfa treated at a rate of 829 kg/(ha yr) showed significantly more leaf margin necrosis than did the unsprayed alfalfa. In the cantaloupe, there were no visually apparent differences among salt treatments. Hand-harvested cotton plots had a significant reduction is seed cotton yield at the 415 kg/(ha yr) treatment. A similar though nonsignificant, trend towards reduced yield with increased salt treatment was observed in machine-harvested cotton plots

Effect of irrigation disruption and biological nitrogen on growth and ...

African Journals Online (AJOL)

In addition, the maximum (4.29 %) harvest index was obtained from irrigation disruption at third and second harvest with 9 L/ha of nitroxin application. In conclusion, lower amounts of nitrogen was needed to produced the optimal yield of seed in water deficit situation compared with non stress condition, while the nitrogen ...

Spatio-temporal estimation of consumptive water use for assessment of irrigation system performance and management of water resources in irrigated Indus Basin, Pakistan

Science.gov (United States)

Usman, M.; Liedl, R.; Awan, U. K.

2015-06-01

Reallocation of water resources in any irrigation scheme is only possible by detailed assessment of current irrigation performance. The performance of the Lower Chenab Canal (LCC) irrigation system in Pakistan was evaluated at large spatial and temporal scales. Evaporative Fraction (EF) representing the key element to assess the three very important performance indicators of equity, adequacy and reliability, was determined by the Surface Energy Balance Algorithm (SEBAL) using Moderate Resolution Imaging Spectroradiometer (MODIS) images. Spatially based estimations were performed at irrigation subdivisions, lower and upper LCC and, whole LCC scales, while temporal scales covered months, seasons and years for the study period from 2005 to 2012. Differences in consumptive water use between upper and lower LCC were estimated for different crops and possible water saving options were explored. The assessment of equitable water distribution indicates smaller coefficients of variation and hence less inequity within each subdivision except Sagar (0.08) and Bhagat (0.10). Both adequacy and reliability of water resources are found lower during kharif as compared to rabi with variation from head to tail reaches. Reliability is quite low from July to September and in February/March. This is mainly attributed to seasonal rainfalls. Average consumptive water use estimations indicate almost doubled water use (546 mm) in kharif as compared to (274 mm) in rabi with significant variability for different cropping years. Crop specific consumptive water use reveals rice and sugarcane as major water consumers with average values of 593 mm and 580 mm, respectively, for upper and lower LCC, followed by cotton and kharif fodder. The water uses for cotton are 555 mm and 528 mm. For kharif fodder, corresponding values are 525 mm and 494 mm for both regions. Based on the differences in consumptive water use, different land use land cover change scenarios were evaluated with regard to savings

USING PASSIVE AND ACTIVE MULTISPECTRAL SENSORS ON THE CORRELATION WITH THE PHENOLOGICAL INDICES OF COTTON

OpenAIRE

Souza, Heloisa B.; Baio, Fabio H. R.; Neves, Danilo C.

2017-01-01

ABSTRACT: The investment in precision agriculture technologies has been growing as well the investment in vegetation index sensors with different types of data collection. This study aimed to evaluate the NDVI potential use obtained from passive and active multispectral sensors as phenological parameters indicator of cotton growth. The experiment was conducted in cultivated cotton fields during the harvest seasons of 2013/14 and 2014/15. The phenological variables analyzed in the field, were ...

Drip irrigation and fertigation of potato under light-textured soils of cappadocia region

International Nuclear Information System (INIS)

Halitgil, M. B.; Onaran, H.; Munsuz, N.; Kislal, H.; Akin, A.; Unlenen, A. L.; Cayci, G.; Kutuk, C.

2002-01-01

In order to evaluate potato response to drip irrigation and N fertigation; and also to improve nitrogen and water use efficiencies of potato and eventually to obtain less nitrogen polluted surface and water, 10 field experiments were carried out at three different locations in Cappadocia Region of Turkey in 1997, 1998, 1999 and 2000 growing seasons. Nitrogen as ammonium sulphate ((NH 4 ) 2 So 4 ), was supplied by drip irrigation water (fertigation) at rates of 0, 30, 60 and 90 kg N/da. Also, soil N application treatment equivalent to the fertigation treatment of 60kg N/da was included. These five treatments were investigated in a completely randomized block design with four replicants. Agria potato variety was used in all experiments and potato was planted in mid May and harvested at the end of October.''1''5N-labelled ammonium sulphate fertilizer were applied in isotope-sub plots within the macroplots for each treatment, in order to determine the amount of nitrogen taken up by the plant, nitrogen use efficiency and the distribution of residual nitrogen at different depths in the soil profile. Each year, during the growth period, total 12 irrigations were done and 50 mm of water was applied at each irrigation. At harvest, plant samples (tuber and leaf+vein) and soil samples were taken from each plot and N%, ''1''5N% atom excess (''1''5N% a.e.) and Ndff% determinations were done. Soil water contents at differrent soil depths were determined by soil moisture neutron probe at plantingand at harvest period so that water contents at different soil layers and water use efficiencies were calculated for each treatment. The results obtained showed that 3350 kg/da mean total marketable tuber yield was obtained with application of 600 mm irrigation water. Also,it was found that water did not move below 90 cm of soil layer in drip irrigation-fertigation system, which showed clearly that no nitrogen movement occured beyond 90 cm soil depth. Tuber yields and %Ndff increased when

Is current irrigation sustainable in the United States? An integrated assessment of climate change impact on water resources and irrigated crop yields

Science.gov (United States)

Blanc, Elodie; Caron, Justin; Fant, Charles; Monier, Erwan

2017-08-01

While climate change impacts on crop yields has been extensively studied, estimating the impact of water shortages on irrigated crop yields is challenging because the water resources management system is complex. To investigate this issue, we integrate a crop yield reduction module and a water resources model into the MIT Integrated Global System Modeling framework, an integrated assessment model linking a global economic model to an Earth system model. We assess the effects of climate and socioeconomic changes on water availability for irrigation in the U.S. as well as subsequent impacts on crop yields by 2050, while accounting for climate change projection uncertainty. We find that climate and socioeconomic changes will increase water shortages and strongly reduce irrigated yields for specific crops (i.e., cotton and forage), or in specific regions (i.e., the Southwest) where irrigation is not sustainable. Crop modeling studies that do not represent changes in irrigation availability can thus be misleading. Yet, since the most water-stressed basins represent a relatively small share of U.S. irrigated areas, the overall reduction in U.S. crop yields is small. The response of crop yields to climate change and water stress also suggests that some level of adaptation will be feasible, like relocating croplands to regions with sustainable irrigation or switching to less irrigation intensive crops. Finally, additional simulations show that greenhouse gas (GHG) mitigation can alleviate the effect of water stress on irrigated crop yields, enough to offset the reduced CO2 fertilization effect compared to an unconstrained GHG emission scenario.

Financial Performance of Irrigation Associations: Selected Cases from Turkey

Directory of Open Access Journals (Sweden)

Erol H. Cakmak

2006-01-01

Full Text Available The objective of the study was to trace the performance of selected irrigation associations after the transfer of operation and maintenance (O&M activities from the state to the farmers. Four irrigation associations were selected according to the regional and cropping pattern diversity. The area of the selected associations made up slightly more than 5 percent of the total transferred area. The data for the different types of revenues and expenses of the associations were obtained from the annual reports of the associations to the State Hydraulic Works. Results suggest that irrigation associations are able to fulfill irrigation tasks to a large extent using enhanced equipment. Fee collection rates are at improved levels, despite delays in payments, mainly due to the mismatch of the financial and production calendars. Dominant cropping patterns for cotton lead to higher and increasing O&M expenditures compared to cereals. Although the transfers increased the adjustment ability of farmers to exogenous factors, the findings suggest that it is still too early to decide on the sustainability of the transfer program.

Field Evidence Supporting Conventional Onion Curing Practices as a Strategy To Mitigate Escherichia coli Contamination from Irrigation Water.

Science.gov (United States)

Wright, Daniel; Feibert, Erik; Reitz, Stuart; Shock, Clint; Waite-Cusic, Joy

2018-03-01

The Produce Safety Rule of the U.S. Food Safety Modernization Act includes restrictions on the use of agricultural water of poor microbiological quality. Mitigation options for poor water quality include the application of an irrigation-to-harvest interval of onion production includes an extended irrigation-to-harvest interval (onion fields (randomized block design; n = 5) via drip tape on the final day of irrigation. Onions remained undisturbed for 7 days and were then lifted to the surface to cure for an additional 21 days before harvest. Water, onions, and soil were tested for presence of rifampin-resistant E. coli. One day after irrigation, 13.3% of onions (20 of 150) receiving the poorest quality water (3 log CFU/mL) tested positive for E. coli; this prevalence was reduced to 4% (6 of 150 onions) after 7 days. Regardless of inoculum level, E. coli was not detected on any onions beyond 15 days postirrigation. These results support conventional dry bulb onion curing practices as an effective strategy to mitigate microbiological concerns associated with poor quality irrigation water.

Comparative profitability of onions harvested as green and dry (mature in Botswana

Directory of Open Access Journals (Sweden)

S.P. Baliyan

2013-06-01

Full Text Available This study was an attempt to calculate and compare the profitability of onions harvested as green and dry (mature in Botswana. Half of the planted onions were harvested and sold as green and half were harvested and sold as dry onions. The cost of production of green onions was 32.78% higher than the cost of production of dry onions. The irrigation and marketing expenses contributed the highest difference in the cost of production of green and dry onions. The major cost item contributing to the cost of green onions production was marketing cost (32.86% followed by irrigation cost (23.77% and harvesting cost (18.53% whereas the highest cost of production for dry onions was contributed by irrigation (38.58% followed by marketing (19.45% and planting (11.96%. The marketing cost for green onions was almost double (35.6% as compare to the dry onions (18.2%. The total return from green onions was 50.90% higher than the returns from dry onions. Gross margin of onions harvested as green was 63% higher than the gross margin from dry onions, which indicated that the production of green onions is more profitable as compare to production of dry onions. The farmers preferred onion harvested as green because it generates regular and higher returns than onions harvested as mature. Government should support farmers through some policies such as Minimum Support Price (MSP for dry onions, distribution of Mini Ferti–Seed Kit (Seeds of improved varieties and fertilizer package, construction of storages and formation of cooperatives.

Monsoon Harvests: Assessing the Impact of Rainwater Harvesting Ponds on Subsistence-Level Agriculture in the Gundar Basin, Tamil Nadu, India

Science.gov (United States)

Steiff, M.; Van Meter, K. J.; Basu, N. B.

2013-12-01

Lack of consistent water availability for irrigated agriculture is recognized as one of the primary constraints to meeting the UN Millennium Development Goals to alleviate hunger, and in semi-arid landscapes such as those of southern India, which are characterized by high intra-annual variability in rainfall, provision of capabilities for seasonal storage is recognized to be one of the key strategies towards alleviating water scarcity problems and ensuring food security. Although the issue of increased storage can be addressed by centralized infrastructure projects such as large-scale irrigation systems and dams, an alternative is the "soft path" approach, in which existing large-scale projects are complemented by small-scale, decentralized solutions. Such a decentralized approach has been utilized in southern India for thousands of years in the form of village rainwater harvesting tanks or ponds, providing a local and inherently sustainable approach to providing sufficient water for rice cultivation. Over the last century, however, large-scale canal projects and groundwater pumping have replaced rainwater harvesting as the primary source of irrigation water. But with groundwater withdrawals now exceeding recharge in many areas and water tables continuing to drop, many NGOs and government agencies are advocating for a revival of the older rainwater harvesting systems. Questions remain, however, regarding the limits to which rainwater harvesting can provide a solution to decades of water overexploitation. In the present work, we have utilized secondary data sources to analyze the linkages between the tank irrigation systems and the village communities that depend on them within the Gundar Basin of southern Tamil Nadu. Combining socioeconomic data with information regarding climate, land use, groundwater depletion, and tank density, we have developed indicators of sustainability for these systems. Using these indicators, we have attempted to unravel the close

Effects of irrigation strategies and soils on field grown potatoes

DEFF Research Database (Denmark)

Ahmadi, Seyed Hamid; Plauborg, Finn; Andersen, Mathias Neumann

2011-01-01

Root distribution of field grown potatoes (cv. Folva) was studied in 4.32m2 lysimeters and subjected to full (FI), deficit (DI), and partial root-zone drying (PRD) irrigation strategies. Drip irrigation was applied for all irrigations. Irrigations were run in three different soils: coarse sand......, loamy sand, and sandy loam. Irrigation treatments started after tuber bulking and lasted until final harvest with PRD and DI receiving 65% of FI. Potatoes irrigated with water-saving irrigation techniques (PRD and DI) did not show statistically different dry root mass and root length density (RLD, cm...... density in the furrow. Most roots accumulated in the surface layers of coarse sand as compared to the other soil types. In the deep soil profile (30–70 cm) a higher root density was found in loamy sand compared with the sandy loam and coarse sand. Approximately twice the amounts of roots were found below...

TEST OF COTTON LINES WITH DROUGHT TOLERANT INTERCROPPED WITH MAIZE

Directory of Open Access Journals (Sweden)

Kadarwati F.T.

2017-12-01

Full Text Available The distribution of cotton cultivation is mostly located in the sub-optimal land due to competition with the field crop. The cotton cultivation in Indonesia is always done through intercropping with pulses. This research aims to test the suitability of cotton lines with drought-tolerant intercropped with maize. The research is conducted in February to August 2016 at Asembagus Experimental Garden, Situbondo. Planting materials used in this research are 6 lines and 2 varieties of drought-tolerant cotton consist of strain 03001/9, 03008/24, 03008/25, 03017/13, 06062/3, 06063/3, kanesia 10 and kanesia 14. The research prepared by the draft randomized group with three replications. The observation parameter consists of plant height, canopy width, number of generative branches, number of fruits, fruits weight, the yield of seed cotton, and corn dry results. The research result shows that the strain 03017/13 and 03008/24 have the highest consecutive acceptance of IDR 17,860,681 and IDR 17,520,879, the increase in revenue compared to monoculture is IDR 6,278,473 and IDR 5,668,191, seed cotton production amounted to 2470.01 kg/ha and 2329.72 kg/ha, maize production amounted to 2001.54 kg/ha and 2112.74 kg/ha, LER 1.68 and 1.60, number of harvested fruit of 12.66 and 11.76 fruits/plant, fruit weight of 4.05 and 4.17 g/fruit.

Impact of reclaimed water irrigation on soil salinity, hydraulic conductivity, cation exchange capacity and macro-nutrients

Directory of Open Access Journals (Sweden)

Saif A. Al-Khamisi

2016-01-01

Full Text Available Field studies were conducted at Agriculture Research Center, Oman during the year 2010/2011 to monitor the impact of reclaimed water irrigation on soil physical and chemical properties after wheat, cowpea and maize cultivation (in rotation. Three different water sources (Groundwater (GW, desalinized water (DW, and Reclaimed Water (RW were used as the treatments in Randomized Completely Block Design (RCBD with 3 blocks (replicates. Samples were taken from four depths (30, 45, 60 and 90 cm after harvesting time of the three crops. Soil salinity (ECe in all soil depths decreased with time. Organic carbon did not show significant difference between harvest timings of wheat and cowpea. Organic carbon increased with time in soil irrigated with reclaimed water. The saturated hydraulic conductivity of the soil, Ksat didn’t show significant difference among the water types and their interaction with soil depths. Total nitrogen was the highest after cowpea harvest in reclaimed water irrigation. The soil phosphorus and potassium were not affected by any of the three water irrigation types. The highest concentrations of phosphorus and potassium were found to be in the upper soil layers. Overall, no adverse impacts of reclaimed water irrigation were observed after growing three crops of rotation.

Converting Surface Irrigation to Pressurized Irrigation Systems and its Effecton Yield of OrangeTrees (Case Study:North of Khouzestan

Directory of Open Access Journals (Sweden)

M. Khorramian

2017-01-01

pan coefficient of 0.8. During the growth season, soil moisture content was measured before irrigation in root zone depth using weighing method at two points of the beginning and the end of the garden to obtain an average showing changes of the field moisture content. Applied water were measured with flow meter for OHSI, UTSI,TI, MI and BI methods and WSC flume for SI treatment. In middle January after fruit ripening, fruit yield was determined by harvesting all the fruits from six trees located in the center of each plot. Weight of fruits from every tree was recorded. Then, 3kilogram fruits per tree were randomly separated and peel thickness, diameter, weight, juice solid percent, total dissolved solids(TSS and Citric acid were measured. Results Discussion: The annual precipitation was 385,345, and 336 mm for 2004, 2005, and 2006 years, respectively. The mean temperature of June, July and August (the warmest months for 2004, 2005, and 2006 was 45.6, 45.2 and 45.8°C. Higher temperature in third year caused to increase heat stress, so fruit yield decreased. Irrigation water consumption in OHSI and UTSI were among 15000 to 17000 m3ha-1. Continues contact of irrigation water contacting with leaves in OHSI causes the accumulation of salts on the leaf surface and leaf drop in harvest season. Consumed water in BI, MI and TI compared with SI method reduced by as much as 48.6%, 57.2%, and 58.4%, respectively. Because soil wetted area in BI, MI and TI methods were low and about 30 to 50 percent of soil area. There were significant differences in citrus yield, water use efficiency (WUE and quality in 1% and 5%, so that comparison of means in Mars variety showed that the yield of trees in TI and SI methods were significantly higher than UTSI method. On the other hand, fruit yield was similar in OHSI, MI, TI and SI methods. Valencia variety fruit yield was similar for in BI, MI, TI and SI methods in all 3 years, and significantly more than OHSI and UTSI although BI, MI, TI used

Regulating irrigation during pre-harvest to avoid the incidence of translucent flesh disorder and gamboge disorder of mangosteen fruits

Directory of Open Access Journals (Sweden)

Rawee Chiarawipa

2005-09-01

Full Text Available In humid tropical areas, excess water during pre-harvest usually causes the occurrence of translucent flesh disorder (TFD and gamboge disorder (GD in mangosteen. To evaluate options for avoiding these incidences, an experiment was conducted with different water management regimes during pre-harvest. Twelve 14-year-old trees were grown under transparent plastic cover with three irrigation regimes: 1 Control (rainfed condition, 2 7-d interval watering, 3 4-d interval watering and 4 daily watering. A further four trees were arranged as the control (rainfed treatment, but these were grown without the plastic roof cover. The treatments were started at 9 weeks after bloom. The results showed that diurnal changes of leaf water potential and stomatal conductance were lowest in the control, because intermittent drying occurred during the study period. The highest fruit diameter, fruit weight, flesh firmness and flesh and rind water contents were found in the daily watering treatment. However, all of these values were lowest in the control trees. The amount of TFD was also lowest in the control (3.7%, and it was significantly different from the treatment where trees were watered at 4-d intervals (18.0% and where trees were watered daily (28.9%. There was no significant difference of TFD between the control and the 7-d interval watering treatments. In contrast, GD was not significantly different among the treatments. It is suggested that the risk of TFD and GD incidence could be avoided by maintaining mild soil water deficit around -70 kPa during pre-harvest.

Effects of rootstocks and irrigation levels on grape quality of Vitis ...

African Journals Online (AJOL)

Moreover, T1 or T2 treatments caused an increase in TA, TP, AA, TSS, total sugar content, ash, and CIRG index values of grape samples in comparison to that of vines irrigated with T3, T4 and T5 levels. Grape quality response to irrigation levels was altered by rootstocks and quality of grapes harvested from vines grafted on ...

Image processing for stripper harvested cotton trash content measurement a progress report

Science.gov (United States)

This study was initiated to provide the basis for obtaining on-line information as to the levels of the various types of gin trash. The objective is to provide the ginner with knowledge of the quantity of the various trash components in the raw uncleaned seed cotton. This information is currently no...

Zero tillage: A potential technology to improve cotton yield

Directory of Open Access Journals (Sweden)

Abbas Hafiz Ghazanfar

2016-01-01

Full Text Available Zero tillage technology revealed with no use of any soil inverting technique to grow crops. The crop plant seed is planted in the soil directly after irrigation to make the soil soft without any replenishing in soil layers. A study was conducted to evaluate cotton genotypes FH-114 and FH-142 for the consecutive three years of growing seasons from 2013-15. The seed of both genotypes was sown with two date of sowing, 1 March and 1 May of each three years of sowing under three tillage treatments (zero tillage, minimum tillage and conventional tillage in triplicate completely randomized split-split plot design. It was found from results that significant differences were recorded for tillage treatments, date of sowing, genotypes and their interactions. Multivariate analysis was performed to evaluate the yield and it attributed traits for potential of FH-114 and FH-142 cotton genotypes. The genotype FH-142 was found with higher and batter performance as compared to FH-114 under zero tillage, minimum tillage and conventional tillage techniques. The traits bolls per plant, boll weight, fibre fineness, fibre strength, plant height, cotton yield per plant and sympodial branches per plant were found as most contributing traits towards cotton yield and production. It was also found that FH-142 gives higher output in terms of economic gain under zero tillage with 54% increase as compared to conventional tillage technique. It was suggested that zero tillage technology should be adopted to improve cotton yield and quality. It was also recommended that further study to evaluate zero tillage as potential technology should be performed with different regions, climate and timing throughout the world.

29 CFR 780.312 - “Hand harvest laborer” defined.

Science.gov (United States)

2010-07-01

... tools, soil grown crops such as cotton, tobacco, grains, fruits, and vegetables. The term would not... (drying shed). (2) The picking up of tomatoes by hand after hand pulling from the vines is “hand...) Employees who hand pick small undesirable fruit prior to harvesting in order to insure a better crop would...

Irrigation strategies that use cutout for optimum boll maturation and yield where growing season duration is limited

Science.gov (United States)

Irrigation water availability is decreasing due to declining water sources and greater competition. Many producers must now comply with annual pumping restrictions that may limit overall productivity of crops like corn (Zea mays L.). Cotton [Gossypium hirsutum (L.)] water demand is less than corn, b...

Correlation Between Precipitation and Crop Yield for Corn and Cotton Produced in Alabama

Science.gov (United States)

Hayes, Carol E.; Perkey, Donald J.

1998-01-01

In this study, variations in precipitation during the time of corn silking are compared to Alabama corn yields. Also, this study compares precipitation variations during bloom to Alabama cotton yield. The goal is to obtain mathematical correlations between rainfall during the crop's critical period and the crop amount harvested per acre.

A Matter of Relationships : Actor-Networks of Colonial Rule in the Gezira Irrigation System, Sudan

NARCIS (Netherlands)

Ertsen, M.W.

2016-01-01

In the first half of the 20th century, colonial rulers, a British firm and Sudanese farmers changed the Gezira Plain in Sudan into a large-scale irrigated cotton scheme. Gezira continues to be in use up to date. Its story shows how the abstract concept 'development' is shaped through the agency of

Circumvention of over-excitation of PSII by maintaining electron transport rate in leaves of four cotton genotypes developed under long-term drought.

Science.gov (United States)

Kitao, M; Lei, T T

2007-01-01

We investigated the patterns of response to a long-term drought in the field in cotton cultivars (genotypes) with known differences in their drought tolerance. Four cotton genotypes with varying physiological and morphological traits, suited to different cropping conditions, were grown in the field and subjected to a long-term moderate drought. In general, cotton leaves developed under drought had significantly higher area-based leaf nitrogen content (N (area)) than those under well irrigation. Droughted plants showed a lower light-saturated net photosynthetic rate (A (sat)) with lower stomatal conductance (g (s)) and intercellular CO (2) concentration (C (i)) than irrigated ones. Based on the responses of A (sat) to g (s) and C (i), there was no decreasing trend in A (sat) at a given g (s) and C (i) in droughted leaves, suggesting that the decline in A (sat) in field-grown cotton plants under a long-term drought can be attributed mainly to stomatal closure, but not to nonstomatal limitations. There was little evidence of an increase in thermal energy dissipation as indicated by the lack of a decrease in the photochemical efficiency of open PSII (F (v)'/F (m)') in droughted plants. On the basis of electron transport (ETR) and photochemical quenching (q (P)), however, we found evidence indicating that droughted cotton plants can circumvent the risk of excessive excitation energy in photosystem (PS) II by maintaining higher electron transport rates associated with higher N (area), even while photosynthetic rates were reduced by stomatal closure.

CRITICAL INDICATORS IN MECHANIZED HARVEST GRAINS AND FIBER

Directory of Open Access Journals (Sweden)

E. Boeing

2017-10-01

Full Text Available Due to the growth in grain production and intensification of production systems losses are inevitable. The harvest as the last operation performed in the field requires better attention. Although the origins are varied and losses occur both before and during harvesting, approximately 80% of them occur by mechanisms of action of the harvester cutting platform. It is necessary to know the causes of losses, whether physical or physiological operational. Thus, the objective was to conduct a survey of potential losses and / or environmental factors that affect machinery and effectively and should be prioritized in a management program in order to raise the efficiency of harvesting. From the collected data determined if the potential of critical failures through the method of analysis and failure mode effects, using a questionnaire listed with the selected quality indicators. It was concluded that in the mechanical harvesting of cotton harvested product loss and impurity had insusceptible rates be prioritized goals in the management of the production process. While the grain crop (soybean / corn moisture grain and grain breaks are still the main causes in the loss of quality of the product, stressing the importance of harvesters in improving the characteristics at harvest in order to minimize qualitative grain losses.

WEED INTERFERENCE IN COTTON PLANTS GROWN WITH REDUCED SPACING IN THE SECOND HARVEST SEASON

Directory of Open Access Journals (Sweden)

MICHEL ALEX RAIMONDI

2017-01-01

Full Text Available Changes in row spacing may result in changes in crop and weed behavior and crop-weed competition. A study was performed to determine the periods of weed presence and weed control in cotton sown with 0.76 m spacing between planting rows. Cotton cultivar FM 993 was sown on 01/08/2010 with the aim of reaching a density of 190,000 seeds ha-1. Treatments with either weed presence or weed control during the first 0, 5, 10, 15, 22, 29, 36, 43, 50, 57, 64, 71, and 190 days of cultivation were established to determine the period prior to weed interference (PPI, total period of interference prevention (TPIP and critical period of weed control (CPWC. The weed species with high relative importance were Amaranthus retroflexus, Bidens pilosa, Eleusine indica, Digitaria horizontalis, Alternanthera tenella, and Commelina benghalensis. Considering a maximum yield loss of 5%, the PPI was established 11 days after cotton emergence (DAE, the TPWC at 46 DAE, and the CPWC between 11 and 46 DAE, for a total duration of 35 days. Considering a maximum acceptable yield loss equal to the standard deviation for the weed-free treatment, the PPI was established at 6 DAE, the TPWC at 55 DAE, and the CPWC between 6 and 55 DAE for a total duration of 49 days.

Estimating irrigation water use in the humid eastern United States

Science.gov (United States)

Levin, Sara B.; Zarriello, Phillip J.

2013-01-01

Accurate accounting of irrigation water use is an important part of the U.S. Geological Survey National Water-Use Information Program and the WaterSMART initiative to help maintain sustainable water resources in the Nation. Irrigation water use in the humid eastern United States is not well characterized because of inadequate reporting and wide variability associated with climate, soils, crops, and farming practices. To better understand irrigation water use in the eastern United States, two types of predictive models were developed and compared by using metered irrigation water-use data for corn, cotton, peanut, and soybean crops in Georgia and turf farms in Rhode Island. Reliable metered irrigation data were limited to these areas. The first predictive model that was developed uses logistic regression to predict the occurrence of irrigation on the basis of antecedent climate conditions. Logistic regression equations were developed for corn, cotton, peanut, and soybean crops by using weekly irrigation water-use data from 36 metered sites in Georgia in 2009 and 2010 and turf farms in Rhode Island from 2000 to 2004. For the weeks when irrigation was predicted to take place, the irrigation water-use volume was estimated by multiplying the average metered irrigation application rate by the irrigated acreage for a given crop. The second predictive model that was developed is a crop-water-demand model that uses a daily soil water balance to estimate the water needs of a crop on a given day based on climate, soil, and plant properties. Crop-water-demand models were developed independently of reported irrigation water-use practices and relied on knowledge of plant properties that are available in the literature. Both modeling approaches require accurate accounting of irrigated area and crop type to estimate total irrigation water use. Water-use estimates from both modeling methods were compared to the metered irrigation data from Rhode Island and Georgia that were used to

Differential Impact of Passive versus Active Irrigation on Urban Forests in Semiarid Regions

Science.gov (United States)

Luketich, A. M.; Papuga, S. A.; Crimmins, M.

2017-12-01

The network of trees within a city provides a variety of ecosystem services such as flood mitigation and reduced heat island effects. To maintain these `urban forests' in semiarid cities, the use of scarce water resources for irrigation is often necessary. Rainwater harvesting has been widely adopted in Tucson, AZ as a sustainable water source for trees, but the effects of passive water harvesting versus active irrigation on tree canopy productivity and microclimate is largely unquantified. We hypothesize that regardless of whether trees are passively or actively irrigated, deep soil moisture will be elevated compared to natural conditions; however, we expect that increased deep soil moisture conditions will be more frequent using active irrigation. Additionally, we hypothesize that similar to natural settings, urban trees will need access deep soil moisture for transpiration. Therefore, we expect that actively irrigated trees will have more periods of transpiration than passively irrigated trees and that this will result in elevated and sustained phenological activity. We also expect that this difference will translate to more ecosystem services for a longer portion of the year in actively irrigated urban forests. Here, we compare key ecohydrological indicators of passive and active irrigation systems at two sites in Tucson, AZ. Our measurements include soil moisture, transpiration, air temperature, soil temperature, below- and within- canopy temperatures, and canopy phenology. Our first year of results suggest there are differences in transpiration, canopy greening and microclimate between the two irrigation techniques and that the magnitude of these differences are highly seasonal. This research can help to improve understanding of the practices and function of green infrastructure in semiarid cities and inform models that attempt to aggregate the influence of these urban forests for understanding watershed management strategies.

Synthesis of Cotton from Tossa Jute Fiber and Comparison with Original Cotton

Directory of Open Access Journals (Sweden)

Md. Mizanur Rahman

2015-01-01

Full Text Available Cotton fibers were synthesized from tossa jute and characteristics were compared with original cotton by using FTIR and TGA. The FTIR results indicated that the peak intensity of OH group from jute cotton fibers occurred at 3336 cm−1 whereas the peak intensity of original cotton fibers occurred at 3338 cm−1. This indicated that the synthesized cotton fiber properties were very similar to the original cotton fibers. The TGA result showed that maximum rate of mass loss, the onset of decomposition, end of decomposition, and activation energy of synthesized cotton were higher than original cotton. The activation energy of jute cotton fibers was higher than the original cotton fibers.

Responses of Grain Maize to Plant Density at Different Irrigation Regimes

Directory of Open Access Journals (Sweden)

Sara SAMADVAND

2017-12-01

Full Text Available In order to examine the effects of different plant densities, plant patterns and irrigation regimes on yield, yield components and harvest index of grain maize, a field experiment was conducted at Miyandoab Agricultural Research Station, Iran. A strip split plot experiment was conducted based on randomized complete block design with three replications. The results showed that the effect of plant density was significant on kernel yield, harvest index, 1,000 kernel weight. The highest kernel yield was obtained from 90,000 plants ha-1 density. Maximum grain yield (18.530 t ha-1 was obtained from furrow irrigation. However, there was no significant difference between moisture levels of 100% and 120% of field capacity. The lowest kernel yield was obtained at 80% field capacity. This study also showed that mean kernel weight and the number of kernels per row were the most determinant factors in grain yield formation. The highest and the lowest harvest indices were obtained at 120% and 80% treatments of field capacity treatment, respectively.

Water Use Efficiency of Cotton and Wheat Crops at Various Management Allowed Depletion in Lower Indus Basin

Directory of Open Access Journals (Sweden)

KHALIFA QASIML AGHARI

2010-10-01

Full Text Available This paper deals with contemporary irrigation water management of major crops in Lower Indus Basin of Pakistan. Field experiments were conducted to estimate the optimum WUE (Water Use Efficiency for various MAD (Management Allowed Depletion levels including 55, 65 and 75% for cotton crop, and 45, 55 and 65% for wheat crop. The daily actual crop Etca (Evapotranspiration was observed through gypsum blocks and a drainage Lysimeter. The observed seasonal cotton crops ETca in the experiments were 486, 413, and 397 mm for 55, 65, and 75% MAD levels, respectively. Similarly, wheat crops ETca observed were 363, 359, and 332mm for 45, 55, and 65% MAD levels, respectively. The WUE determined in terms of seed-cotton yield per unit of seasonal water use were 6.0, 6.5, and 5.8kg (ha mm-1 The corresponding values of WUE for wheat were 14.1, 15.0 and 13.4kg (ha mm-1. Hence; the highest WUE was achieved with MAD at 65% for cotton and at 55% for wheat.

Effects of Supplemental Irrigation on Yield and Growth Indices of Three

Directory of Open Access Journals (Sweden)

M. Parsa

2012-04-01

Full Text Available In order to investigate the effects of different irrigation regimes on yield and growth indices of three chickpea cultivars, an experiment was conducted during the 2007 growing season at Mashhad (Iran. Six irrigation regimes including I1; full irrigation, I2; irrigation at branching, I3; irrigation at flowering, I4; irrigation at pod formation, I5; irrigation at seed filling stage and I6; dry farming without irrigation (main factors. Three Kabuli chickpea cultivars ILC482, Jam, Karaj 12-60-31 (sub factors in a spilt block experiment based on randomized block design with three replications. There were significant differences between supplemental irrigation levels on grain yield. The results showed that grain yield in supplemental irrigation at flowering stage was more than to supplemental irrigation at branching, podding and seed filling stages (respectively 3.3, 3.1 and 23%. Within the three cultivars, grain yield, biological yield and harvest index were highest and lowest in ILC482 and Karaj 12-60-31 cultivars respectively. The results showed that supplemental irrigation at flowering stage increased dry matter, leaf area index, crop growth rate, relative growth rate and net assimilation rate. The results showed that flowering stage in chickpea cultivars was sensitive to drought stress so, ILC482 cultivar also showed more tolerance to water stress condition.

Effects of different irrigation intervals and plant density on morphological characteristics, grain and oil yields of sesame (Sesamum indicum

Directory of Open Access Journals (Sweden)

parviz rezvani moghadam

2009-06-01

Full Text Available In order to study the effects of different irrigation intervals and plant density on morphological characteristics, grain and oil yields of sesame, an experiment was conducted at experimental station, college of agriculture, Ferdowsi University of Mashhad. Four different irrigation intervals (one, two, three and four weeks with four plant densities (20, 30, 40 and 50 plants/m2 were compared in a spilt plot arrangement based on randomized complete block design with four replications. Irrigation intervals and plant densities allocated in main plots and subplots, respectively. Different characteristics such as plant height, distance of first capsule from soil surface, number of branches per plant, number of grains per capsule, number of capsules per plant, grain yield, 1000-seed weight, harvest index and oil yield were recorded. The results showed that there were no significant difference between different irrigation intervals in terms of distance of first capsule from soil surface, number of grains per capsule, 1000-seed weight and harvest index. Different irrigation intervals had significant effects on plant height, number of branches per plant, number of capsules per plant, grain yield and oil yield. There were significant differences between different plant densities in terms of distance of first capsule from soil surface, number of branches per plant, number of graines per capsule, number of capsules per plant, grain yield, harvest index and oil yield. The highest grain yield (798/7 kg/ha and oil yield (412/8 kg/ha were obtained at one week and four weeks irrigation intervals, respectively. Between all treatments, 50 plants/m2 and one week irrigation interval produced the highest grain yield (914/7 kg/ha and oil yield (478/6 kg/ha. Because of shortage of water in Mashhad condition, the results recommended that, 50 plants/m2 and two weeks irrigation interval produced rather acceptable grain yield, with less water consumption.

Optimization of irrigation water in stone fruit and table grapes

Science.gov (United States)

de la Rosa, Jose Mª; Castillo, Cristina; Temnani, Abdel; Pérez-Pastor, Alejandro

2017-04-01

fresh weight, yield and quality of the harvest were also measured. The irrigation applied in CTL during the 2015-16 was 6770, 7691, 6673, 6774 and 7020 m3 ha-1 year-1 while the decrease in irrigation in RDIs was 28, 40, 12, 34 and 25% for nectarine, peach, apricot, paraguayan and table grapes, respectively. The plant water status indicators used were sensitive to water deficit and showed moderate water stress in RDI. The water deficit affected, to a greater or lesser extent, the vegetative growth of the crop. On the other hand, the yield and fruit quality parameters (size, firmness, total soluble solids, acidity and maturity index) at harvest were not affected by the deficit irrigation. In this way, the water use efficiency increased significantly in RDI treatments. From the information obtained in the demonstration plots irrigation recommendations were made to the farmers of the irrigation community through the project web page. Farmers in the irrigation community are using this information to manage irrigation on their farms, thus improving the profitability of their crops. Acknowledgements This work has been funded by the European Union LIFE+ project IRRIMAN (LIFE13 ENV/ES/000539).

Response of irradiated cotton seeds to different levels of phosphorus fertilizer

International Nuclear Information System (INIS)

Janat, M.; Khalifa, K.

1995-07-01

A two year field experiments 1990, 1991 was conducted over two different locations in order to evaluate the response of cotton seeds exposed to various doses of gamma radiation 0, 5, 10 and 20 Gy, to different levels of phosphorous fertilizer, 0, 60, 100, 140 and 180 Kg P sub 2 O sub 5 ha- sub 1. Irradiation doses and P-Fertilizer levels were arranged in split plot design, where irradiation doses made up the main plots and the P-levels the sub-plots. Representative soil samples were collected and analyzed before planting and after harvesting. Soil test for P revealed enough P was available in the top soil. With a few exceptions, results showed no positive response of cotton crop to P-fertilizer and gamma rays stimulation. (author). 26 refs., 49 tabs

Nitrogen management impacts nitrous oxide emissions under varying cotton irrigation systems in the American Desert Southwest

Science.gov (United States)

Irrigation of food and fiber crops worldwide continues to increase. Nitrogen (N) from fertilizers is a major source of the potent greenhouse gas nitrous oxide (N2O) in irrigated cropping systems. Nitrous oxide emissions data are scarce for crops in the arid Western US. The objective of these studies...

Interference between Redroot Pigweed (Amaranthus retroflexus L.) and Cotton (Gossypium hirsutum L.): Growth Analysis.

Science.gov (United States)

Ma, Xiaoyan; Wu, Hanwen; Jiang, Weili; Ma, Yajie; Ma, Yan

2015-01-01

Redroot pigweed is one of the injurious agricultural weeds on a worldwide basis. Understanding of its interference impact in crop field will provide useful information for weed control programs. The effects of redroot pigweed on cotton at densities of 0, 0.125, 0.25, 0.5, 1, 2, 4, and 8 plants m(-1) of row were evaluated in field experiments conducted in 2013 and 2014 at Institute of Cotton Research, CAAS in China. Redroot pigweed remained taller and thicker than cotton and heavily shaded cotton throughout the growing season. Both cotton height and stem diameter reduced with increasing redroot pigweed density. Moreover, the interference of redroot pigweed resulted in a delay in cotton maturity especially at the densities of 1 to 8 weed plants m(-1) of row, and cotton boll weight and seed numbers per boll were reduced. The relationship between redroot pigweed density and seed cotton yield was described by the hyperbolic decay regression model, which estimated that a density of 0.20-0.33 weed plant m(-1) of row would result in a 50% seed cotton yield loss from the maximum yield. Redroot pigweed seed production per plant or per square meter was indicated by logarithmic response. At a density of 1 plant m(-1) of cotton row, redroot pigweed produced about 626,000 seeds m(-2). Intraspecific competition resulted in density-dependent effects on weed biomass per plant, a range of 430-2,250 g dry weight by harvest. Redroot pigweed biomass ha(-1) tended to increase with increasing weed density as indicated by a logarithmic response. Fiber quality was not significantly influenced by weed density when analyzed over two years; however, the fiber length uniformity and micronaire were adversely affected at density of 1 weed plant m(-1) of row in 2014. The adverse impact of redroot pigweed on cotton growth and development identified in this study has indicated the need of effective redroot pigweed management.

Genome-wide association study identified genetic variations and candidate genes for plant architecture component traits in Chinese upland cotton.

Science.gov (United States)

Su, Junji; Li, Libei; Zhang, Chi; Wang, Caixiang; Gu, Lijiao; Wang, Hantao; Wei, Hengling; Liu, Qibao; Huang, Long; Yu, Shuxun

2018-06-01

Thirty significant associations between 22 SNPs and five plant architecture component traits in Chinese upland cotton were identified via GWAS. Four peak SNP loci located on chromosome D03 were simultaneously associated with more plant architecture component traits. A candidate gene, Gh_D03G0922, might be responsible for plant height in upland cotton. A compact plant architecture is increasingly required for mechanized harvesting processes in China. Therefore, cotton plant architecture is an important trait, and its components, such as plant height, fruit branch length and fruit branch angle, affect the suitability of a cultivar for mechanized harvesting. To determine the genetic basis of cotton plant architecture, a genome-wide association study (GWAS) was performed using a panel composed of 355 accessions and 93,250 single nucleotide polymorphisms (SNPs) identified using the specific-locus amplified fragment sequencing method. Thirty significant associations between 22 SNPs and five plant architecture component traits were identified via GWAS. Most importantly, four peak SNP loci located on chromosome D03 were simultaneously associated with more plant architecture component traits, and these SNPs were harbored in one linkage disequilibrium block. Furthermore, 21 candidate genes for plant architecture were predicted in a 0.95-Mb region including the four peak SNPs. One of these genes (Gh_D03G0922) was near the significant SNP D03_31584163 (8.40 kb), and its Arabidopsis homologs contain MADS-box domains that might be involved in plant growth and development. qRT-PCR showed that the expression of Gh_D03G0922 was upregulated in the apical buds and young leaves of the short and compact cotton varieties, and virus-induced gene silencing (VIGS) proved that the silenced plants exhibited increased PH. These results indicate that Gh_D03G0922 is likely the candidate gene for PH in cotton. The genetic variations and candidate genes identified in this study lay a foundation

On the waterfront : water distribution, technology and agrarian change in a South Indian canal irrigation system

OpenAIRE

Mollinga, P.P.

1998-01-01

This book discusses water distribution in the Tungabhadra Left Bank Canal irrigation system in Raichur district, Karnataka, India. The system is located in interior South India, where rainfall is limited (approximately 600 mm annually) and extremely variable. The region suffered from failed harvests and famines in the past. A large scale irrigation system was constructed to solve these problems. The system is operational since 1953 and was completed in 1968. The area to be irrigated ...

Artificial neural nets application in the cotton yarn industry

Directory of Open Access Journals (Sweden)

Gilberto Clóvis Antoneli

2016-06-01

Full Text Available The competitiveness in the yarn production sector has led companies to search for solutions to attain quality yarn at a low cost. Today, the difference between them, and thus the sector, is in the raw material, meaning processed cotton and its characteristics. There are many types of cotton with different characteristics due to its production region, harvest, storage and transportation. Yarn industries work with cotton mixtures, which makes it difficult to determine the quality of the yarn produced from the characteristics of the processed fibers. This study uses data from a conventional spinning, from a raw material made of 100% cotton, and presents a solution with artificial neural nets that determine the thread quality information, using the fibers’ characteristics values and settings of some process adjustments. In this solution a neural net of the type MultiLayer Perceptron with 11 entry neurons (8 characteristics of the fiber and 3 process adjustments, 7 output neurons (yarn quality and two types of training, Back propagation and Conjugate gradient descent. The selection and organization of the production data of the yarn industry of the cocamar® indústria de fios company are described, to apply the artificial neural nets developed. In the application of neural nets to determine yarn quality, one concludes that, although the ideal precision of absolute values is lacking, the presented solution represents an excellent tool to define yarn quality variations when modifying the raw material composition. The developed system enables a simulation to define the raw material percentage mixture to be processed in the plant using the information from the stocked cotton packs, thus obtaining a mixture that maintains the stability of the entire productive process.

Cotton genotypes selection through artificial neural networks.

Science.gov (United States)

Júnior, E G Silva; Cardoso, D B O; Reis, M C; Nascimento, A F O; Bortolin, D I; Martins, M R; Sousa, L B

2017-09-27

Breeding programs currently use statistical analysis to assist in the identification of superior genotypes at various stages of a cultivar's development. Differently from these analyses, the computational intelligence approach has been little explored in genetic improvement of cotton. Thus, this study was carried out with the objective of presenting the use of artificial neural networks as auxiliary tools in the improvement of the cotton to improve fiber quality. To demonstrate the applicability of this approach, this research was carried out using the evaluation data of 40 genotypes. In order to classify the genotypes for fiber quality, the artificial neural networks were trained with replicate data of 20 genotypes of cotton evaluated in the harvests of 2013/14 and 2014/15, regarding fiber length, uniformity of length, fiber strength, micronaire index, elongation, short fiber index, maturity index, reflectance degree, and fiber quality index. This quality index was estimated by means of a weighted average on the determined score (1 to 5) of each characteristic of the HVI evaluated, according to its industry standards. The artificial neural networks presented a high capacity of correct classification of the 20 selected genotypes based on the fiber quality index, so that when using fiber length associated with the short fiber index, fiber maturation, and micronaire index, the artificial neural networks presented better results than using only fiber length and previous associations. It was also observed that to submit data of means of new genotypes to the neural networks trained with data of repetition, provides better results of classification of the genotypes. When observing the results obtained in the present study, it was verified that the artificial neural networks present great potential to be used in the different stages of a genetic improvement program of the cotton, aiming at the improvement of the fiber quality of the future cultivars.

Effect of Alternative Irrigation Strategies on Yield and Quality of Fiesta Raisin Grapes Grown in California

Directory of Open Access Journals (Sweden)

Isabel Abrisqueta

2018-04-01

Full Text Available Traditionally, grapes are fully irrigated, but alternative irrigation strategies to reduce applied irrigation water may be necessary in the future as occurrences of drought increase. This study was conducted in the San Joaquin Valley (SJV of California from 2012 to 2014. Three irrigation treatments were used to study the effects on the yield and quality of Fiesta grapes. The treatments included: grower irrigation (GI weekly irrigation lasting for approximately 65 h; sustained deficit (SD equal to 80% of the GI treatment; and regulated deficit (RD equal to 50% of the GI until fruit set when it was increased to 80% of the GI through harvest and reduced to 50% of the GI after harvest. Average water use across treatments was ≈489 mm. Average yield across all treatments was 7.9 t ha−1, 9.1 t ha−1 and 11.8 t ha−1 in 2012, 2013, and 2014, respectively. Yield was sustained in SD and RD, with up to a 20% reduction in applied water use compared to GI. There were no differences in raisin quality and grade among any of the treatments in any year. The percentage of substandard grapes decreased from an average of 12.6% in 2012 to 3.6% in 2013 and 2014. Growers may use a sustained deficit approach during periods of limited water availability to minimize the effect on yield.

[Effects of brackish water irrigation on soil enzyme activity, soil CO2 flux and organic matter decomposition].

Science.gov (United States)

Zhang, Qian-qian; Wang, Fei; Liu, Tao; Chu, Gui-xin

2015-09-01

Brackish water irrigation utilization is an important way to alleviate water resource shortage in arid region. A field-plot experiment was set up to study the impact of the salinity level (0.31, 3.0 or 5.0 g · L(-1) NaCl) of irrigated water on activities of soil catalase, invertase, β-glucosidase, cellulase and polyphenoloxidase in drip irrigation condition, and the responses of soil CO2 flux and organic matter decomposition were also determined by soil carbon dioxide flux instrument (LI-8100) and nylon net bag method. The results showed that in contrast with fresh water irrigation treatment (CK), the activities of invertase, β-glucosidase and cellulase in the brackish water (3.0 g · L(-1)) irrigation treatment declined by 31.7%-32.4%, 29.7%-31.6%, 20.8%-24.3%, respectively, while soil polyphenoloxidase activity was obviously enhanced with increasing the salinity level of irrigated water. Compared to CK, polyphenoloxidase activity increased by 2.4% and 20.5%, respectively, in the brackish water and saline water irrigation treatments. Both soil microbial biomass carbon and microbial quotient decreased with increasing the salinity level, whereas, microbial metabolic quotient showed an increasing tendency with increasing the salinity level. Soil CO2 fluxes in the different treatments were in the order of CK (0.31 g · L(-1)) > brackish water irrigation (3.0 g · L(-1)) ≥ saline water irrigation (5.0 g · L(-1)). Moreover, CO2 flux from plastic film mulched soil was always much higher than that from no plastic film mulched soil, regardless the salinity of irrigated water. Compared with CK, soil CO2 fluxes in the saline water and brackish water treatments decreased by 29.8% and 28.2% respectively in the boll opening period. The decomposition of either cotton straw or alfalfa straw in the different treatments was in the sequence of CK (0.31 g · L(-1)) > brackish water irrigation (3.0 g · L(-1)) > saline water treatment (5.0 g · L(-1)). The organic matter

The Effect of Irrigation Regimes and Mulch Application on Vegetative Indices and Essential Oil Content of Peppermint (Mentha piperita L.

Directory of Open Access Journals (Sweden)

M. Azizi

2016-02-01

Full Text Available Peppermint (Mentha piperita L. from Lamiaceae family is one of the most important medicinal plants, used in food, sanitary and cosmetic industries. A field experiment was carried out in Ferdowsi University of Mashhad in 2010-2011 to evaluate the effects of three irrigation levels (100, 80 and 60 percent of water requirements calculated by evaporation pan class A and two mulch types (black plastic and wood chips in comparison to control (without mulch on physiological parameter and essential oils content in a factorial experiments on the basis of Randimised Complete Block Desing with four replications. The data obtained from each harvest analyzed as a factorial experiment on the basis of randomized complete block design with four replications and the results of two harvests analyzed as split plot on time. The results of two harvest indicated that peppermint plants grow better in the first harvest than the second harvest. Plants collected in the first harvest showed higher dry matter and essential oil yield. The highest dry herb yield (44.12 g/plant, the highest percentage of essential oil (2.835 %v/w and the highest essential oil yield (116.7 l/ha detected in plots treated with third level of irrigation and use of wood chips mulch. In conclusion the results also confirmed that the highest dry herb and the highest oil yield per area unit were observed in plots treated with third level of irrigation with use of wood chips mulch.

Irrigation and fruit canopy position modify oil quality of olive trees (cv. Frantoio).

Science.gov (United States)

Caruso, Giovanni; Gucci, Riccardo; Sifola, Maria Isabella; Selvaggini, Roberto; Urbani, Stefania; Esposto, Sonia; Taticchi, Agnese; Servili, Maurizio

2017-08-01

Fruit development and oil quality in Olea europaea L. are strongly influenced by both light and water availability. In the present study, the simultaneous effects of light environment and irrigation on fruit characteristics and oil quality were studied in a high-density orchard over two consecutive years. Olive fruits were harvested from three canopy positions (intercepting approximately 64%, 42% and 30% of above canopy radiation) of fully-productive trees subjected to full, deficit or complementary irrigation. Fruits receiving 61-67% of above canopy radiation showed the highest fruit weight, mesocarp oil content and maturation index, whereas those intercepting only 27-33% showed the lowest values. Palmitoleic and linoleic acids increased in oils obtained from fruits exposed to high light levels, whereas oleic acid and the oleic-linoleic acid ratio decreased. Neither canopy position, nor irrigation affected K 232 , K 270 , ΔK and the concentration of lignan in virgin olive oils (VOOs). Total phenols, 3,4-DHPEA-EDA [2-(3,4-hydroxyphenyl)ethyl (3S,4E)-4-formyl-3-(2-oxoethyl)hex-4-enoate] and p-HPEA-EDA (decarboxymethyl ligstroside-aglycone) increased in VOOs produced from fruits harvested from the top of the canopy, whereas full irrigation decreased total phenols and 3,4-DHPEA-EDA concentrations with respect to the complementary irrigation treatment. Light and water availability are crucial not only for tree productivity, but also they clearly affect olive oil quality. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Organic Matter Decomposition following Harvesting and Site Preparation of a Forested Wetland

Science.gov (United States)

Carl C. Trettin; M. Davidian; M.F. Jurgensen; R. Lea

1996-01-01

Organic matter accumulation is an important process that affects ecosystem function in many northern wetlands. The cotton strip assay (CSA)was used to measure the effect of harvesting and two different site preparation treatments, bedding and trenching, on organic matter decomposition in a forested wetland. A Latin square experimental design was used to determine the...

Heliconia cv. Golden Torch cultivated under different irrigation depths in protected environment

Directory of Open Access Journals (Sweden)

Alcilane Arnaldo Silva

2018-04-01

Full Text Available The genus Heliconia is commercially detached by the exotic appearance of the inflorescences but is susceptible to lack of moisture in the soil, being necessary the irrigation management. In this sense, the objective was to evaluate the effect of different irrigation levels on the plant growth and productive characters of Heliconia psittacorum cv. Golden Torch cultivated in vase. The experiment was conducted from March to October 2014, in a randomized blocks design. Five treatments corresponding to the different irrigation levels were used [50, 75, 100, 125 and 150% of the evaporation measured in Class A (ECA] with four replicates and two plants per replicate. The following evaluations were carried out: number of days for the emergence of the first tiller, number of days for the emergence of the first inflorescence, number of days for the inflorescence harvest, crop cycle, diameter of the flower stem, length of the flower stem, inflorescence length, plant high, number of tillers and productivity of flower stems. Chlorophyll and leaf area measurements were performed. The irrigation levels tested significantly influenced the number of days for the first inflorescence harvest, length of the flower stem and inflorescence length. The irrigation level of 150% ECA provided better results for the length of the flower stem, inflorescence length and for leaf area but without differences from 75%, 100% and 125% ECA. Thus, for the cultivation of the heliconia cv. Golden Torch in pot can be recommended the level corresponding from 75% to 150% ECA.

Effect of Limited Irrigation on Yield and Yield Component of Several Sweet Corn (Zea mays L.var Saccharata Varieties

Directory of Open Access Journals (Sweden)

Sh Ghazian Tafrishi

2013-08-01

Full Text Available A randomized complete block design with four replications and a split plot arrangement was conducted in 2010, in order to study the effect of limited irrigation on yield and yield component of sweet corn. Water levels were (100%, 80%, and 60% replacement of plant water requirement which served as main plots. Subplot was a factorial arrangement of three different sweet corn varieties (Merit, Obsession and KSC403 with two planting methods (raised bed and furrow planting. The evaluated traits were ear length, ear diameter, kernels number per row, seed rows per ear, kernel depth, seed thousands weight, kernel yield, shoot biomass, harvest index and Anthesis- silking interval. Results show that limited irrigation significantly decreased all measured characteristics but harvest index. Effect of varieties was significant on evaluated traits too. Kernel weight and seed depth were significantly affected by interaction between variety and planting method. The highest yield was found for 100% replacement of water requirement irrigation level whit 15.2 tones per hectare kernel weight and the lowest belongs to 60% replacement of water requirement by 8.6 tones per hectare kernel weight. Merit and KSC 403 produces the highest (15.9 ton/ha and lowest (8.8 ton/ha seed yield, respectively. Harvest index of different varieties were not affected by irrigation regime. Results show that, in whole, limited irrigation, decreased seed yield in all varieties by affecting diverse yield component.

Sodium and chloride accumulation in leaf, woody, and root tissue of Populus after irrigation with landfill leachate

International Nuclear Information System (INIS)

Zalesny, Jill A.; Zalesny, Ronald S.; Wiese, Adam H.; Sexton, Bart; Hall, Richard B.

2008-01-01

The response of Populus to irrigation sources containing elevated levels of sodium (Na + ) and chloride (Cl - ) is poorly understood. We irrigated eight Populus clones with fertilized well water (control) (N, P, K) or municipal solid waste landfill leachate weekly during 2005 and 2006 in Rhinelander, Wisconsin, USA (45.6 deg. N, 89.4 deg. W). During August 2006, we tested for differences in total Na + and Cl - concentration in preplanting and harvest soils, and in leaf, woody (stems + branches), and root tissue. The leachate-irrigated soils at harvest had the greatest Na + and Cl - levels. Genotypes exhibited elevated total tree Cl - concentration and increased biomass (clones NC14104, NM2, NM6), elevated Cl - and decreased biomass (NC14018, NC14106, DM115), or mid levels of Cl - and biomass (NC13460, DN5). Leachate tissue concentrations were 17 (Na + ) and four (Cl - ) times greater than water. Sodium and Cl - levels were greatest in roots and leaves, respectively. - Sodium and chloride supplied via landfill leachate irrigation is accumulated at high concentrations in tissues of Populus

Water saving at the field scale with Irrig-OH, an open-hardware environment device for soil water potential monitoring and irrigation management

Science.gov (United States)

Masseroni, Daniele; Facchi, Arianna; Gandolfi, Claudio

2015-04-01

Sustainability of irrigation practices is an important objective which should be pursued in many countries, especially in areas where water scarcity causes strong conflicts among the different water uses. The efficient use of water is a key factor in coping with the food demand of an increasing world population and with the negative effects of the climate change on water resources availability in many areas. In this complex context, it is important that farmers adopt instruments and practices that enable a better management of water at the field scale, whatever the irrigation method they adopt. This work presents the hardware structure and the functioning of an open-hardware microstation based on the Arduino technology, called Irrig-OH, which allows the continuous and low-cost monitoring of the soil water potential (SWP) in the root zone for supporting the irrigation scheduling at the field scale. In order to test the microstation, an experiment was carried out during the agricultural season 2014 at Lodi (Italy), with the purpose of comparing the farmers' traditional management of irrigation of a peach variety and the scheduling based on the SWP measurements provided by the microstation. Additional measurements of leaf water potential (LWP), stomatal resistance, transpiration (T), crop water stress index (CWSI) and fruit size evolution were performed respectively on leafs and fruits for verifying the plant physiological responses on different SWP levels in soil. At the harvesting time, the peach production in term of quantity and quality (sucrose content was measured by a rifractometer over a sample of one hundred fruits) of the two rows were compared. Irrigation criteria was changed with respect to three macro-periods: up to the endocarp hardening phase (begin of May) soil was kept well watered fixing the SWP threshold in the first 35 cm of the soil profile at -20 kPa, during the pit hardening period (about the entire month of May) the allowed SWP threshold was

Effect of different rates of potassium fertilizer on nitrogen use efficiency and cotton yield using an 15N isotopic dilution technique

International Nuclear Information System (INIS)

Khalifa, Kh.; Al-Chamma'a, M.; Al-Ain, F.

2005-03-01

A field study was carried out during the 2003 growing season on a loamy to sandy clay loamy soil, located at the Lower Euphrate's Valley, 15 km southeast of Deir - Ezzor city to evaluate the effect of K fertilizer on nitrogen , potassium use efficiency and cotton yield. Three nitrogen ( N1 =120, N2 =180, and N3 = 240 kg N / ha ) and four potassium application rates ( K0 = 0 , K1 = 50, K2 = 100, K3 = 150 kg K2O / ha ) were employed. The cotton variety was Deir 22 sown on April 2003 at a spacing of 70 cm between rows and 20 cm between pits with 5 seeds per pit. The plants were thinned to 2 plants per pit 4 weeks after planting. Representative samples of aboveground portions of cotton plants were harvested from labeled subplots at 108 and 161 days after planting . Dry matter weight , N uptake, N fertilizer yield, N use efficiency, K use efficiency, seed cotton yield, earliness, leaf area, number of bolls / plant, and number of branches / plant were evaluated. The results showed that seed cotton yield increased with increasing K levels applied under each rate of N ( except N120 ). The highest seed cotton yield was obtained with the combined treatment N3K1 ( 6442 kg/ha ). This treatment gave also the optimum potassium use efficiency ( 42 % ). Nitrogen use efficiency (at 180 days of harvest ) increased with the increasing K application rate. Nitrogen use efficiency (NUE) was decreased with increasing N rates . Increasing K application rate ( KUE ) decreased potassium use efficiency. A maximum N use efficiency ( 98% ) was obtained for combined treatment N2 K3. Also the results indicated that dry matter weight and N uptake increased with increasing K rates applied. Nitrogen derived from fertilizer (Ndff ) was higher in combined treatments than the control treatments (K0 ). (Authors)

Testing an Irrigation Decision Support Tool for California Specialty Crops

Science.gov (United States)

Johnson, L.; Cahn, M.; Benzen, S.; Zaragoza, I.; Murphy, L.; Melton, F. S.; Martin, F.; Quackenbush, A.; Lockhart, T.

2015-12-01

Estimation of crop evapotranspiration supports efficiency of irrigation water management, which in turn can mitigate nitrate leaching, groundwater depletion, and provide energy savings. Past research in California and elsewhere has revealed strong relationships between photosynthetically active vegetation fraction (Fc) and crop evapotranspiration (ETc). Additional research has shown the potential of monitoring Fc by satellite remote sensing. The U.C. Cooperative Extension developed and operates CropManage (CM) as on-line database irrigation (and nitrogen) scheduling tool. CM accounts for the rapid growth and typically brief cycle of cool-season vegetables, where Fc and fraction of reference ET can change daily during canopy development. The model automates crop water requirement calculations based on reference ET data collected by California Dept. Water Resources. Empirically-derived equations are used to estimate daily Fc time-series for a given crop type primarily as a function of planting date and expected harvest date. An application programming interface (API) is under development to provide a check on modeled Fc of current crops and facilitate CM expansion to new crops. The API will enable CM to extract field scale Fc observations from NASA's Satellite Irrigation Management Support (SIMS). SIMS is mainly Landsat based and currently monitors Fc over about 8 million irrigation acres statewide, with potential for adding data from ESA/Sentinel for improved temporal resolution. In the current study, a replicated irrigation trial was performed on romaine lettuce at the USDA Agricultural Research Station in Salinas, CA. CropManage recommendations were used to guide water treatments by drip irrigation at 50%, 75%, 100% ETc replacement levels, with an added treatment at 150% ET representing grower standard practice. Experimental results indicate that yields from the 100% and 150% treatments were not significantly different and were in-line with industry average, while

PERIODS OF WEED INTERFERENCE ON TRANSGENIC COTTON ‘IMACD 6001LL’

Directory of Open Access Journals (Sweden)

MARCOS PAULO DA SILVA

2016-01-01

Full Text Available The objective of this study was to determine the periods of weed interference and its impact on productivity of cotton 'IMACD 6001LL'. The experiment was conducted in Jaboticabal, São Paulo, the second crop in 2011 and consisted of two treatment groups: the first culture remained free of competing weeds since of emergence up different periods of its development: (0-15 , 0-25, 0-35, 0-45, 0-55, 0-65, 0-75 and 0-183 days - harvest. In the second treatment group was held to the contrary: the crop was in harmony with the weeds since of emergence up to the same stages of development described above. The treatments were arranged in a randomized block design in four replications. During these periods was evaluated dry matter accumulation by weeds. The cotton yield data were subjected to regression analysis and resulting in a CPWC of 35 DAE, the CPWR was 133 DAE and .The weed community was composed mainly of Raphanus raphanistrum, Amaranthus spp., Cyperus rotundus, Alternanthera tenella and Eleusine indica. Living with this community throughout the cycle resulted in reduction almost 85% in cotton yield.

Water and energy footprint of irrigated agriculture in the Mediterranean region

Science.gov (United States)

Daccache, A.; Ciurana, J. S.; Rodriguez Diaz, J. A.; Knox, J. W.

2014-12-01

Irrigated agriculture constitutes the largest consumer of freshwater in the Mediterranean region and provides a major source of income and employment for rural livelihoods. However, increasing droughts and water scarcity have highlighted concerns regarding the environmental sustainability of agriculture in the region. An integrated assessment combining a gridded water balance model with a geodatabase and GIS has been developed and used to assess the water demand and energy footprint of irrigated production in the region. Modelled outputs were linked with crop yield and water resources data to estimate water (m3 kg-1) and energy (CO2 kg-1) productivity and identify vulnerable areas or ‘hotspots’. For a selected key crops in the region, irrigation accounts for 61 km3 yr-1 of water abstraction and 1.78 Gt CO2 emissions yr-1, with most emissions from sunflower (73 kg CO2/t) and cotton (60 kg CO2/t) production. Wheat is a major strategic crop in the region and was estimated to have a water productivity of 1000 t Mm-3 and emissions of 31 kg CO2/t. Irrigation modernization would save around 8 km3 of water but would correspondingly increase CO2 emissions by around +135%. Shifting from rain-fed to irrigated production would increase irrigation demand to 166 km3 yr-1 (+137%) whilst CO2 emissions would rise by +270%. The study has major policy implications for understanding the water-energy-food nexus in the region and the trade-offs between strategies to save water, reduce CO2 emissions and/or intensify food production.

Effect of Water Quality and Drip Irrigation Management on Yield and Water Use Efficiency in Late Summer Melon

Directory of Open Access Journals (Sweden)

javad baghani

2016-02-01

Full Text Available Introduction: Production and growth of plants in many parts of the world due to degradation and water scarcity have been limited and particularly, in recent decades, agriculture is faced with stress. In the most parts of Iran, especially in the Khorasan Razavi province, drought is a fact and water is very important. Due to melon cultivation in this province, and the conditions of quality and quantity of water resources and water used to produce the melon product in this province, any research done on the use of saline and brackish waters is statistically significant. Materials and Methods: To study the effects of different water salinity and water management on some of the agronomic traits of late summer melon with drip irrigation, an experiment with 7 treatments and 3 repetitions was conducted in a randomized complete block design, in Torogh station, Mashhad. The irrigation treatments were: 1- fresh water from planting to harvesting, 2- water (3 dS/m from planting to harvesting, 3- water (6 dS/m from planting to harvesting, 4- water (6 dS/m from 20 days after plantation to harvesting, 5-water (6 dS/m from 40 days after plantation to harvesting, 6-water (3 dS/m from 20 days after plantation to harvesting, 7-water (6 dS/m from 40 days after plantation to harvesting. Row spacing and plant spacing were 3 m and 60 cm, respectively and the pipe type had 6 liters per hour per unit of meters in the drip irrigation system. Finally, the amount of salinity water, number of male and female flowers, number of seed germination, dry leaves' weight, leaf area, chlorophyll (with SPAD etc. were measured and all data were analyzed by using MSTAT-C software and all averages of data, were compared by using the Duncan test. Results and Discussion The results of analysis of data showed the following: Number of seeds germination: Salinity in water irrigation had no significant effects on the number of seed germination. However, there was the most number of seed

Design and Modeling of an Adaptively Controlled Rainwater Harvesting System

Directory of Open Access Journals (Sweden)

David Roman

2017-12-01

Full Text Available Management of urban stormwater to mitigate Combined Sewer Overflows (CSOs is a priority for many cities; yet, few truly innovative approaches have been proposed to address the problem. Recent advances in information technology are now, however, providing cost-effective opportunities to achieve better performance of conventional stormwater infrastructure through a Continuous Monitoring and Adaptive Control (CMAC approach. The primary objective of this study was to demonstrate that a CMAC approach can be applied to a conventional rainwater harvesting system in New York City to improve performance by minimizing discharge to the combined sewer during rainfall events, reducing water use for irrigation of local vegetation, and optimizing vegetation health. To achieve this objective, a hydrologic and hydraulic model was developed for a planned and designed rainwater harvesting system to explore multiple potential scenarios prior to the system’s actual construction. Model results indicate that the CMAC rainwater harvesting system is expected to provide significant performance improvements over conventional rainwater harvesting systems. The CMAC system is expected to capture and retain 76.6% of roof runoff per year on average, as compared to just 14.8% and 41.3% for conventional moisture and timer based systems, respectively. Similarly, the CMAC system is expected to use 81.4% and 18.0% less harvested rainwater than conventional moisture and timer based irrigation approaches, respectively. The flexibility of the CMAC approach to meet competing objectives is promising for widespread implementation in New York City and other heavily urbanized areas challenged by stormwater management issues.

China's Cotton Policy and the Impact of China's WTO Accession and Bt Cotton Adoption on the Chinese and U.S. Cotton Sectors

OpenAIRE

Cheng Fang; Bruce A. Babcock

2003-01-01

In this paper we provide an analysis of China's cotton policy and develop a framework to quantify the impact of both China's World Trade Organization (WTO) accession and Bt (Bacillus thuringiensis) cotton adoption on Chinese and U.S. cotton sectors. We use a Chinese cotton sector model consisting of supply, demand, price linkages, and textiles output equations. A two-stage framework model provides gross cropping area and total area for cotton and major subsitute crops from nine cotton-produci...

Effect of drip irrigation on yield, evapotranspiration and water use efficiency of sweet basil (Ocimum basilicum L.

Directory of Open Access Journals (Sweden)

Pejić Borivoj

2017-01-01

Full Text Available The experiments showing the effect of drip irrigation on yield, evapotranspiration and water productivity of sweet basil (Ocimum basilicum L. were conducted at the experimental field of the Alternative Crops Department, Institute of Field and Vegetable Crops, Novi Sad. Irrigation was scheduled on the basis of the water balance method. Daily evapotranspiration (ETd was computed from the reference evapotranspiration (ETo and crop coefficient (kc in May, June, July and August of 0.5, 0.6, 1.1 and 1.0, respectively. ETo was calculated using Hargreaves equation. The irrigation depth was restricted to the soil depth of 0.3 m. In other words, irrigation started when readily available water in the soil layer of 0.3 m was completely depleted by plants. The irrigation rate was 30 mm (30 l m-2 while the amount of water added by irrigation during the season was 140 mm. Basil sensitivity to water stress was determined using a yield response factor (Ky. According to the results, the yield of fresh herb of basil under irrigation (32.015 t ha-1 was higher by 9% compared to non-irrigated, control variant (29.364 t ha-1. Worthy of note, basil essential oil yield was significantly affected by irrigation (35.329/28.766 kg ha-1. The content of essential oil was significantly higher in irrigated (6.45 g kg-1 than in non-irrigated variant (5.33 g kg-1 in the first harvest, while no significant difference between irrigated and non-irrigated variants was obtained in the second harvest (6.83 and 6.62 g kg-1 , respectively. Water used on evapotranspiration in irrigation conditions (ETm was 431 mm and 270 mm in non-irrigated, control variant (ETa. The values of irrigation water use efficiency (Iwue and evapotranspiration water use efficiency (ETwue were 1.89 kg m-3 and 1.65 kg m-3 respectively. Ky value (0.22 exhibits all essential characteristics of climate conditions of 2016 rainy year. These preliminary results could be used as a good platform for basil growers in the

Impact of Bollgard cotton on Indian cotton production and Income of ...

Indian Academy of Sciences (India)

Impact of Bollgard cotton on Indian cotton production and Income of cotton farmers. Presentation made in the Seventy Second Annual Meeting Indian Academy of Sciences, Bangalore at Devi Ahilya Vishwavidyalaya Indore 11th November 2006.

Final Report of the HyPER Harvester Project

Energy Technology Data Exchange (ETDEWEB)

Prasad, Nadipuram R [New Mexico State Univ., Las Cruces, NM (United States); Ranade, Satishkuma J [New Mexico State Univ., Las Cruces, NM (United States)

2015-11-30

The HyPER Harvester Project resulted in the first full­scale design, fabrication and testing of two vertical­axis harvester prototypes at the Elephant Butte Irrigation District Drop 8 Station in Southern New Mexico. The design, followed by fabrication, and deployment clearly demonstrated the feasibility to manufacture and deploy harvester prototypes at low cost. While several issues common to irrigation canal systems have to be overcome, the electromechanical performance of the integrated turbine­generator system demonstrated proof­of­concept. Proof­of­concept includes 1) feasibility for using additive manufacturing techniques to fabricate Carbon­composite turbine­generator components at low cost, 2) ease of transportation and deployment, and 3) the harvester performance. The benefits of modularity were demonstrated in terms of rapid deployment at the Drop 8 Station. Scalability and adaptability were proven in terms of the custom­fitting characteristics that enabled rapid deployment. While keeping the same shape and form, the harvester can be easily adapted to any drop environment. Self­supporting ability makes the harvester design minimally intrusive on existing structures. There are two technical challenges ahead that have to be addressed. Irregular flow patterns in canal flow induce vertical oscillations due to pressure change across the impeller. Despite the nosecone in conventional Kaplan turbine design that ordinarily dampens oscillations, an effective coupling design is required to eliminate the hydrodynamic effect on the generating system. In arid areas where tumbleweed is present, a robust design to prevent trash entering the drop is required. The compact shape and form have an aesthetic appearance and appear to illustrate an environmentally friendly attribute. The systems­engineered design enables rapid manufacturing and assembly of desired size units that can be deployed at sites along U.S. waterways as small hydropower plants. There is

Irrigation management of muskmelon with tensiometry

Directory of Open Access Journals (Sweden)

Márcio José de Santana

2017-11-01

Full Text Available The production and consumption of muskmelon have been increasing (MELO et al., 2014, thus, information on techniques for higher field productions are necessary. The experiment described in the present work was conducted in the IFTM, Uberaba, State of Minas Gerais, Brazil, aiming to evaluate the muskmelon yield under different soil water tensions. A randomized block experimental design was used with five treatments (soil water tensions of 10, 20, 30, 40 and 50 kPa and four replications (plots of two rows of 14 plants. Two harvests were carried out and the fruit yield, stem diameter, number of fruits per plant and efficiency of water use were evaluated. Irrigation was performed with a drip irrigation system and managed with tensiometry. The cultivar Bonus n.2 was used with spacing of 1.0 x 0.6 m. The data of the variables were subjected to the F test and regression test. The treatments showed statistical differences in number of fruits per plant, fruit weight (fruit yield and stem diameter. The highest fruit yield found was 1.36 kg fruit-1 and the highest water use efficiency was 4.08 g mm-1 with irrigation for a soil water tension of 10 kPa. The lowest fruit yield was found with irrigation for a soil water tension of 50 kPa.

Development of High Resolution Data for Irrigated Area and Cropping Patterns in India

Science.gov (United States)

K a, A.; Mishra, V.

2015-12-01

Information of crop phenology and its individual effect on irrigation is essential to improve the simulation of land surface states and fluxes. We use moderate resolution imaging spectroradiometer (MODIS) - Normalized difference vegetation index (NDVI) at 250 m resolution for monitoring temporal changes in irrigation and cropping patterns in India. We used the obtained dataset of cropping pattern for quantifying the effect of irrigation on land surface states and fluxes by using an uncoupled land surface model. The cropping patterns are derived by using the planting, heading, harvesting, and growing dates for each agro-ecological zone separately. Moreover, we developed a high resolution irrigated area maps for the period of 1999-2014 for India. The high resolution irrigated area was compared with relatively coarse resolution (~ 10km) irrigated area from the Food and Agricultural Organization. To identify the seasonal effects we analyzed the spatial and temporal change of irrigation and cropping pattern for different temporal seasons. The new irrigation area information along with cropping pattern was used to study the water budget in India using the Noah Land surface Model (Noah LSM) for the period of 1999-2014.

Agricultural irrigated land-use inventory for Jackson, Calhoun, and Gadsden Counties in Florida, and Houston County in Alabama, 2014

Science.gov (United States)

Marella, Richard L.; Dixon, Joann F.

2015-09-18

A detailed inventory of irrigated crop acreage is not available at the level of resolution needed to accurately estimate water use or to project future water demands in many Florida counties. This report provides a detailed digital map and summary of irrigated areas for 2014 within Jackson, Calhoun, and Gadsden Counties in Florida, and Houston County in Alabama. The irrigated areas were delineated using land-use data and orthoimagery that were then field verified between June and November 2014. Selected attribute data were collected for the irrigated areas, including crop type, primary water source, and type of irrigation system. Results of the 2014 study indicate that an estimated 31,608 acres were irrigated in Jackson County during 2014. This estimate includes 25,733 acres of field crops, 1,534 acres of ornamentals and grasses (including pasture), and 420 acres of orchards. Specific irrigated crops include cotton (11,759 acres), peanuts (9,909 acres), field corn (2,444 acres), and 3,235 acres of various vegetable (row) crops. The vegetable acreage includes 1,714 acres of which 857 acres were planted with both a spring and fall crop on the same field (double cropped). Overall, groundwater was used to irrigate 98.6 percent of the total irrigated acreage in Jackson County during 2014, whereas surface water and wastewater were used to irrigate the remaining 1.4 percent.

Impact of efficient refuge policies for Bt cotton in India on world cotton trade

OpenAIRE

Singla, Rohit; Johnson, Phillip N.; Misra, Sukant K.

2010-01-01

India is a major cotton producing country in the world along with the U.S. and China. A change in the supply of and demand for cotton in the Indian market has the potential to have an impact on world cotton trade. This study evaluates the implications of efficient Bt cotton refuge policies in India on world and U.S. cotton markets. It can be hypothesized that increased refuge requirements for Bt cotton varieties in India could decrease the world supply of cotton because of the lower yield pot...

Coastal surface water suitability analysis for irrigation in Bangladesh

Science.gov (United States)

Mahtab, Mohammad Hossain; Zahid, Anwar

2018-03-01

Water with adequate quality and quantity is very important for irrigation to ensure the crop yields. Salinity is common problem in the coastal waters in Bangladesh. The intensity of salinity in the coastal zone in Bangladesh is not same. It fluctuates over the year. Sodium is another hazard which may hamper permeability and ultimately affects the fertility. It can reduce the crop yields. Although surface water is available in the coastal zone of Bangladesh, but its quality for irrigation needs to be monitored over the year. This paper will investigate the overall quality of coastal surface waters. Thirty-three water samples from different rivers were collected both in wet period (October-December) and in dry period (February-April). Different physical and chemical parameters are considered for investigation of the adequacy of water with respect to international irrigation water quality standards and Bangladesh standards. A comparison between the dry and wet period coastal surface water quality in Bangladesh will also be drawn here. The analysis shows that coastal surface water in Bangladesh is overall suitable for irrigation during wet period, while it needs treatment (which will increase the irrigation cost) for using for irrigation during dry period. Adaptation to this situation can improve the scenario. An integrated plan should be taken to increase the water storing capacity in the coastal area to harvest water during wet period.

Comparing Sprinkler and Surface Irrigation for Wheat Using Multi-Criteria Analysis: Water Saving vs. Economic Returns

Directory of Open Access Journals (Sweden)

Hanaa Darouich

2017-01-01

Full Text Available Coping with water scarcity using supplemental irrigation of wheat (Triticum aestivum L. in the semi-arid northeast Syria is a great challenge for sustainable water use in agriculture. Graded borders and set sprinkler systems were compared using multi-criteria analysis. Alternative solutions for surface irrigation and for sprinkler systems were developed with the SADREG and the PROASPER design models, respectively. For each alternative, two deficit irrigation strategies were considered, which were characterized using indicators relative to irrigation water use, yields and water productivity, including farm economic returns. Alternatives were ranked considering two contrasting priorities: economic returns and water saving. A first step in ranking led to a selection of graded borders with and without precise land levelling and of solid set and semi-permanent sprinkler systems. Precise-levelled borders were better for water saving, while non-precise ones ranked higher for economic returns. Semi-permanent set systems have been shown to be better in economic terms and similar to solid set systems when water saving is prioritized. Semi-permanent sprinkler systems rank first when comparing all type of systems together regardless of the considered deficit irrigation strategy. Likely, border irrigation is appropriate when wheat is in rotation with cotton if the latter is surface irrigated. When peace becomes effective, appropriate economic incentives and training for farmers are required to implement innovative approaches.

Assessment of rainwater harvesting potential using GIS

Science.gov (United States)

Hari, Durgasrilakshmi; Ramamohan Reddy, K.; Vikas, Kola; Srinivas, N.; Vikas, G.

2018-03-01

Rainwater harvesting (RWH) is one of the best practices to overcome the scarcity of water. Rainwater harvesting involves collection and storage of rainwater locally through different technologies, for future use. It is also useful for livestock, groundwater recharge and for irrigation practices. Potential of rainwater harvesting refers to the capacity of an individual catchment that harnesses the water falling on the catchment during a particular year considering all rainy days. The present study deals with the identification of the study area boundary and marking it as a Polygon in Google Earth Pro Later, Rooftops of various house entities and roads were digitized using the Polygon command in Google Earth Pro. GIS technique is employed for locating boundaries of the study area and for calculating the areas of various types of rooftops and roads. With the application of GIS, it is possible to assess the total potential of water that can be harvested. The present study will enable us to identify the suitable type of water harvesting structure along with the number of structures required. It is extremely an ideal and effective solution to overcome the water crisis through water conservation in the study area.

Improved framework model to allocate optimal rainwater harvesting sites in small watersheds for agro-forestry uses

Science.gov (United States)

Terêncio, D. P. S.; Sanches Fernandes, L. F.; Cortes, R. M. V.; Pacheco, F. A. L.

2017-07-01

This study introduces an improved rainwater harvesting (RWH) suitability model to help the implementation of agro-forestry projects (irrigation, wildfire combat) in catchments. The model combines a planning workflow to define suitability of catchments based on physical, socio-economic and ecologic variables, with an allocation workflow to constrain suitable RWH sites as function of project specific features (e.g., distance from rainfall collection to application area). The planning workflow comprises a Multi Criteria Analysis (MCA) implemented on a Geographic Information System (GIS), whereas the allocation workflow is based on a multiple-parameter ranking analysis. When compared to other similar models, improvement comes with the flexible weights of MCA and the entire allocation workflow. The method is tested in a contaminated watershed (the Ave River basin) located in Portugal. The pilot project encompasses the irrigation of a 400 ha crop land that consumes 2.69 Mm3 of water per year. The application of harvested water in the irrigation replaces the use of stream water with excessive anthropogenic nutrients that may raise nitrosamines in the food and accumulation in the food chain, with severe consequences to human health (cancer). The selected rainfall collection catchment is capable to harvest 12 Mm3·yr-1 (≈ 4.5 × the requirement) and is roughly 3 km far from the application area assuring crop irrigation by gravity flow with modest transport costs. The RWH system is an 8-meter high that can be built in earth with reduced costs.

Dictionary of Cotton

Science.gov (United States)

The Dictionary of Cotton has over 2,000 terms and definitions that were compiled by 33 researchers. It reflects the ongoing commitment of the International Cotton Advisory Committee, through its Technical Information Section, to the spread of knowledge about cotton to all those who have an interest ...

Water movement through a shallow unsaturated zone in an inland arid region: Field drip irrigation experiment under matrix potential control

Science.gov (United States)

Zhou, T.; Han, D.; Song, X.

2017-12-01

It is vital to study soil water movement in unsaturated zone for evaluating and improving current irrigation mode for prevention and control of soil secondary salinization, especially in inland arid area, where is characterized by strong evaporation, poor drainage system and shallow water table depth. In this study, we investigated the applicability of drip irrigation under matrix potential control during cotton growth seasons in an inland arid region of northwest China. Combined physical observation with stable isotopes tracing method, we studied soil water flow system and recharge sources of shallow groundwater in heavy (Pilot 1) and light (Pilot 2) saline-alkali cotton fields. Evaporation depths (about 50-60 cm) are about the same for both pilots, but infiltration depths (about 60 cm for Pilot 1 and 150 cm for Pilot 2) are very different due to different soil texture, soil structure and soil salt content. Middle layer (about 100 cm thick) is a critical barrier for water exchange between surface and deep layer. Irrigation water is the major source (about 79.6% for Pilot 1 and 81.6% for Pilot 2), while evapotranspiration is the major sink (about 80.7% for Pilot 1 and 83.1% for Pilot 2) of unsaturated zone. The increase of soil water storage is not enough to make up the water shortage of middle layer and thus drip irrigation water doesn't recharge into groundwater for both pilots. Water table rise (about 60 cm for Pilot 1 and 50 cm for Pilot 2) could be caused by lateral groundwater flow instead of vertical infiltration. This irrigation mode could retard the water table rise in this region. However, improving horizontal drainage system may be indispensable for sustainable agriculture development. The study can provide important basis for soil secondary salinization prevention and agricultural water management in inland arid areas.

Rainwater harvesting potential for farming system development in a hilly watershed of Bangladesh

Science.gov (United States)

Tariqul Islam, Md.; Mohabbat Ullah, Md.; Mostofa Amin, M. G.; Hossain, Sahadat

2017-09-01

Water resources management is an important part in farming system development. Agriculture in Chittagong Hill Tracts of Bangladesh is predominantly rainfed with an average 2210 mm monsoonal rain, but rainfall during dry winter period (December-February) is inadequate for winter crop production. The natural soil water content (as low as 7 %) of hillslope and hilltop during the dry season is not suitable for shallow-rooted crop cultivation. A study was conducted to investigate the potential of monsoonal rainwater harvesting and its impact on local cropping system development. Irrigation facilities provided by the managed rainwater harvesting reservoir increased research site's cropping intensity from 155 to 300 %. Both gravity flow irrigation of valley land and low lift pumping to hillslope and hilltop from rainwater harvesting reservoir were much more economical compared to forced mode pumping of groundwater because of the installation and annual operating cost of groundwater pumping. To abstract 7548 m3 of water, equivalent to the storage capacity of the studied reservoirs, from aquifer required 2174 kWh energy. The improved water supply system enabled triple cropping system for valley land and permanent horticultural intervention at hilltop and hillslope. The perennial vegetation in hilltop and hillslope would also conserve soil moisture. Water productivity and benefit-cost ratio analysis show that vegetables and fruit production were more profitable than rice cultivation under irrigation with harvested rainwater. Moreover, the reservoir showed potentiality of integrated farming in such adverse area by facilitating fish production. The study provides water resource managers and government officials working with similar problems with valuable information for formulation of plan, policy, and strategy.

Deficit irrigation and organic compost improve growth and yield of quinoa and pea

DEFF Research Database (Denmark)

Hirich, A.; Choukr-Allah, R.; Jacobsen, Sven-Erik

2014-01-01

Supplying organic matter under deficit irrigation conditions could be a practical solution to compensate the negative effect of water stress. For this purpose, studies in pea as a legume and quinoa as a new drought-tolerant crop were conducted in the south of Morocco between October 2011 and March...... significantly (P ≤ 0.05) increased seed yield by 18 and 11% under stress conditions and by 13 and 3% under full irrigation for quinoa and by 24 and 11% under full irrigation and by 41 and 25% under water-deficit irrigation for pea. It can be concluded that organic amendment improved significantly yield...... harvested yield was affected significantly (P seed yields (3.3 t ha-1 for quinoa and 5.6 t ha-1 for pea) were recorded under full irrigation and 10 t ha-1 of compost. Results indicated that organic amendment of 10 t ha-1 and 5 t ha-1...

Water and energy footprint of irrigated agriculture in the Mediterranean region

International Nuclear Information System (INIS)

Daccache, A; Ciurana, J S; Knox, J W; Rodriguez Diaz, J A

2014-01-01

Irrigated agriculture constitutes the largest consumer of freshwater in the Mediterranean region and provides a major source of income and employment for rural livelihoods. However, increasing droughts and water scarcity have highlighted concerns regarding the environmental sustainability of agriculture in the region. An integrated assessment combining a gridded water balance model with a geodatabase and GIS has been developed and used to assess the water demand and energy footprint of irrigated production in the region. Modelled outputs were linked with crop yield and water resources data to estimate water (m 3 kg −1 ) and energy (CO 2 kg −1 ) productivity and identify vulnerable areas or ‘hotspots’. For a selected key crops in the region, irrigation accounts for 61 km 3 yr −1 of water abstraction and 1.78 Gt CO 2 emissions yr −1 , with most emissions from sunflower (73 kg CO 2 /t) and cotton (60 kg CO 2 /t) production. Wheat is a major strategic crop in the region and was estimated to have a water productivity of 1000 t Mm −3 and emissions of 31 kg CO 2 /t. Irrigation modernization would save around 8 km 3 of water but would correspondingly increase CO 2 emissions by around +135%. Shifting from rain-fed to irrigated production would increase irrigation demand to 166 km 3 yr −1 (+137%) whilst CO 2 emissions would rise by +270%. The study has major policy implications for understanding the water–energy–food nexus in the region and the trade-offs between strategies to save water, reduce CO 2 emissions and/or intensify food production. (letter)

Potential microbial risk factors related to soil amendments and irrigation water of potato crops.

Science.gov (United States)

Selma, M V; Allende, A; López-Gálvez, F; Elizaquível, P; Aznar, R; Gil, M I

2007-12-01

This study assesses the potential microbial risk factors related to the use of soil amendments and irrigation water on potato crops, cultivated in one traditional and two intensive farms during two harvest seasons. The natural microbiota and potentially pathogenic micro-organisms were evaluated in the soil amendment, irrigation water, soil and produce. Uncomposted amendments and residual and creek water samples showed the highest microbial counts. The microbial load of potatoes harvested in spring was similar among the tested farms despite the diverse microbial levels of Listeria spp. and faecal coliforms in the potential risk sources. However, differences in total coliform load of potato were found between farms cultivated in the autumn. Immunochromatographic rapid tests and the BAM's reference method (Bacteriological Analytical Manual; AOAC International) were used to detect Escherichia coli O157:H7 from the potential risk sources and produce. Confirmation of the positive results by polymerase chain reaction procedures showed that the immunochromatographic assay was not reliable as it led to false-positive results. The potentially pathogenic micro-organisms of soil amendment, irrigation water and soil samples changed with the harvest seasons and the use of different agricultural practices. However, the microbial load of the produce was not always influenced by these risk sources. Improvements in environmental sample preparation are needed to avoid interferences in the use of immunochromatographic rapid tests. The potential microbial risk sources of fresh produce should be regularly controlled using reliable detection methods to guarantee their microbial safety.

Phenology of German Chamomile and its Changes under Different Irrigation Regimes and Plant Densities

Directory of Open Access Journals (Sweden)

Alireza PIRZAD

2010-03-01

Full Text Available In order to definite growth stages of Matricaria chamomilla L., 40 plants were planted with 200 200 cm distance from each other. To determine the phenology under different water stress condition and plant densities, an experiment was conducted in factorial based on randomized complete block design with two factors including irrigation at 4 levels (25, 50, 75, and 100 mm evaporation from pan class A, and plant density at 5 levels (cultivation in 30 cm rows with 5, 10, 15, 20 and 25 cm intra-row spaces with three replications. Definition of growth stages including the maximum number of nodes, sub stems and tillers were 21, 20 and 14 that were occurred at 970, 1088 and 1088 oC growth degree-days, respectively. The numbers of nodes were 28.6, 30.0, 30.2 and 27.8, of sub stem were 19.2, 18.4, 19.8 and 18.4; and of tillers were 14.8, 14.0, 15.0 and 14.4 that were obtained from irrigation at 25, 50, 75, and 100 mm evaporation from pan, respectively. In the other hand, the number of nodes as follow 28.25, 29.00, 29.75, 29.75 and 29.00; sub stem as 17.50, 20.00, 20.75, 19.00 and 17.50; and tillers were 15.00, 13.50, 14.75, 14.00 and 15.50 that were obtained from 5, 10, 15, 20 and 25 cm intra-row spacing, respectively. Differences by irrigation on GDDs values were observed at the second harvest. However the earliest observation of flower and seed receiving at the first harvest occurred on 5 cm intra-row spacing. These changes were identical by GDDs for second harvest of flower, but with mild slope of reduction. There were no differences in number of leaves and tillers among irrigation levels and plant densities.

Yield, Quality and Water Consumption of Stevia rebaudiana Bertoni Grown under Different Irrigation Regimes in Southern Italy

Directory of Open Access Journals (Sweden)

Antonella Lavini

2008-06-01

Full Text Available Stevia rebaudiana Bertoni is a herbaceous perennial plant originating in the north-east of Paraguay. Its leaves contain low-calorie sweetening agents that can be used as a natural alternative to artificial sweeteners. The leaves are consumed in special human diets and for the treatment of various diseases. The aim of the present work is to study water consumption, yield potential and quality characteristics of this species under different irrigation levels in southern Italy. The field work was carried out in 2006-2007. Irrigation treatments consisted of a control (T100, irrigated with 100% restitution of water consumption and two treatments that received a water depth of 33% (T33 and 66% (T66 of treatment T100. Watering volume was estimated to replenish the soil profile to field capacity for a depth of 0.40 m. The crop was harvested twice a year, and agronomic performance as well as the major cation and glycoside contents (stevioside and rebaudioside A were evaluated. Overall, the crop coefficients were similar between the two years, although in each year the second growing period showed higher values due to the higher evaporative demand of this period. Interactions of years with irrigation treatments and harvest time were not significant either for yield or yield components. In both cuts the T100 treatments achieved 40% higher leaf dry yield than T33, while T66 showed intermediate values. The harvest index and water use efficiency showed no differences between the two cuts for the same treatments, while the values of both indices decreased with the increase in irrigation regime. Stevioside, rebaudioside A and cation content in the leaves were unaffected by irrigation regime. In order to develop the field cultivation of this species, field experiments are required to prepare a cultivation protocol as well as a genetic improvement program to develop varieties that better respond to the local environment.

Yield, Quality and Water Consumption of Stevia rebaudiana Bertoni Grown under Different Irrigation Regimes in Southern Italy

Directory of Open Access Journals (Sweden)

Riccardo d’Andria

2011-02-01

Full Text Available Stevia rebaudiana Bertoni is a herbaceous perennial plant originating in the north-east of Paraguay. Its leaves contain low-calorie sweetening agents that can be used as a natural alternative to artificial sweeteners. The leaves are consumed in special human diets and for the treatment of various diseases. The aim of the present work is to study water consumption, yield potential and quality characteristics of this species under different irrigation levels in southern Italy. The field work was carried out in 2006-2007. Irrigation treatments consisted of a control (T100, irrigated with 100% restitution of water consumption and two treatments that received a water depth of 33% (T33 and 66% (T66 of treatment T100. Watering volume was estimated to replenish the soil profile to field capacity for a depth of 0.40 m. The crop was harvested twice a year, and agronomic performance as well as the major cation and glycoside contents (stevioside and rebaudioside A were evaluated. Overall, the crop coefficients were similar between the two years, although in each year the second growing period showed higher values due to the higher evaporative demand of this period. Interactions of years with irrigation treatments and harvest time were not significant either for yield or yield components. In both cuts the T100 treatments achieved 40% higher leaf dry yield than T33, while T66 showed intermediate values. The harvest index and water use efficiency showed no differences between the two cuts for the same treatments, while the values of both indices decreased with the increase in irrigation regime. Stevioside, rebaudioside A and cation content in the leaves were unaffected by irrigation regime. In order to develop the field cultivation of this species, field experiments are required to prepare a cultivation protocol as well as a genetic improvement program to develop varieties that better respond to the local environment.

Cotton, tomato, corn, and onion production with subsurface drip irrigation – a review

Science.gov (United States)

The usage of subsurface drip irrigation (SDI) has increased by 89% in the USA during the last ten years according to USDA NASS estimates and over 93% of the SDI land area is located in just ten states. Combining public entity and private industry perceptions of SDI in these ten states, the major cro...

Effect of irrigation and nitrogen fertilizer levels on yield and yield components of dill (Anethum graveolens L.

Directory of Open Access Journals (Sweden)

S. Madadi Bonab

2016-05-01

Full Text Available In order to investigate the effect of irrigation and nitrogen fertilizer on yield and yield components of (Anethum graveolens L., a field experiment was performed in Agricultural Research Farm of the University of Tabriz, Iran, during growing season of 2009-2010. The experiment was carried out as split plot based on randomized complete block design with three replications. Irrigation treatments (irrigation after 70, 100, 130 mm evaporation from class A pan and nitrogen levels (0, 40, 80, 120 kg.ha-1 were allocated to main and sub-plots, respectively. The results showed that nitrogen fertilizer had significant (p≤0.05 effect on minor diameter umbrella, 1000-seed weight, seed yield and harvest index. However, irrigation and effect between irrigation and nitrogen were not affected any of the traits. The greatest minor diameter umbrella was obtained with control nitrogen treatment and maximum 1000-seed weight, harvest index and seed yield were obtained from 40 kg.ha-1 nitrogen. There was no any significant difference between 40 and 80 kg.ha-1 nitrogen levels. Therefore, it seems that for producing the highest yield application of 40 kg.ha-1 nitrogen is suitable. As water deficit no significant effects on this traits, of dill, it can be concluded that dill is a tolerant plant to drought stress.

QUALITY OF IRRIGATED APPLES IN THE SEMIARID REGION OF THE NORTHEAST OF BRAZIL

Directory of Open Access Journals (Sweden)

CÍNTIA PATRÍCIA MARTINS DE OLIVEIRA

2017-01-01

Full Text Available The great solar radiation in the Brazilian semiarid region, combined with an adequate irrigation management, favors fruit production and quality of crops that were adapted to this region. The objective of this work was to evaluate the fruit quality of two apple cultivars grown in the Sub-Mid São Francisco River Valley under different irrigation water depths. A complete randomized block experimental design in a split -plot arrangement with five replications was used. The plots consisted of four irrigation water depths (ID (60, 80, 100 and 120% of the reference evapotranspiration - ETo, the subplots consisted of two apple cultivars (C (Julieta and Princesa and the sub-subplots consisted of fruit positions in the tree canopies (FP (east and west sides. The soluble solids content (SS, titratable acidity (TA, SS/TA ratio, pulp firmness (PF and fresh weight (FW of the fruits were evaluated. The factors evaluated showed no triple interaction between the evaluated factors, however, the SS and TA were significantly affected by them; the interaction between ID and C significantly affected the PF; the interaction between ID and FP significantly affected the PF, SS/TA ratio and FW; and the interaction between C and FP significantly affected the SS/TA ratio. The increase in water depth increased the fruit size of both cultivars, without compromising the post-harvest quality. The cultivar Princesa presented the best results regarding SS, TA, PF and FW, however, both cultivars had organoleptic characteristics within the recommended standards for commercialization. The fruits harvested on the west side presented better post-harvest quality.

Practical salinity management for leachate irrigation to poplar trees.

Science.gov (United States)

Smesrud, Jason K; Duvendack, George D; Obereiner, James M; Jordahl, James L; Madison, Mark F

2012-01-01

Landfill leachate can be beneficially reused for irrigation of fiber crops with appropriate attention to nutrient and salinity management. The Riverbend Landfill in Western Oregon has been effectively practicing irrigation of landfill leachate to poplar trees since 1993. Over that time, the site has been adaptively managed to control salinity impacts to the tree crop while beneficially utilizing the applied water and nutrients during each growing season. Representative leachate irrigation water has ranged in concentration of total dissolved solids from 777 to 6,940 mg/L, chloride from 180 to 1,760 mg/L and boron from 3.2 to 7.3 mg/L. Annual leachate irrigation applications have also ranged between 102 and 812 mm/yr. Important conclusions from this site have included: 1) Appropriate tree clone selection and tree stand spacing, thinning, and harvest rotations are critical to maintaining a productive tree stand that is resilient and resistant to salt stress. The most effective combinations have included clones DN-34, OP-367, 184-411, 49-177, and 15-29 planted at spacing of 3.7-m x 1.8-m to 3.7-m x 3.7-m; 2) Leaf tissue boron levels are closely correlated to soil boron levels and can be managed with leaching. When leaf tissue boron levels exceed 200 to 250 mg/kg, signs of salt stress may emerge and should be monitored closely; 3) Salinity from leachate irrigation can be managed to sustain a healthy tree crop by controlling mass loading rates and providing appropriate irrigation blending if necessary. Providing freshwater irrigation following each leachate irrigation and targeting freshwater irrigation as 30 percent of total irrigation water applied has successfully controlled salt impacts to vegetation; and 4) Drip irrigation generally requires more careful attention to long-term soil salinity management than spray irrigation. Moving drip irrigation tubes periodically to prevent the formation of highly saline zones within the soil profile is important. In this paper, a

Bt cotton and employment effects for female agricultural laborers in Pakistan.

Science.gov (United States)

Kouser, Shahzad; Abedullah; Qaim, Matin

2017-01-25

The literature about economic and social impacts of Bt cotton adoption on farm households in developing countries is growing. Yet, there is still uncertainty about wider implications of this technology for rural development, including effects for landless rural laborers. Bt-related yield advantages may lead to intensified production and higher demand for labor. Building on farm survey data collected in Pakistan and using double-hurdle regression models, we analyze employment effects of Bt cotton adoption. Model estimates show that Bt adoption has increased the demand for hired labor by 55%. Manual harvesting, which is common in Pakistan, is a labor-intensive activity primarily carried out by female laborers. Accordingly, gender disaggregation shows that the employment-generating effects are particularly strong for women, who often belong to the most disadvantaged groups of rural societies. These results suggest that Bt technology can contribute to additional employment income for the poor and to more equitable rural development. Copyright © 2016 Elsevier B.V. All rights reserved.

Decreasing Agricultural Irrigation has not reversed Groundwater Depletion in the Yellow River Basin

Science.gov (United States)

Kang, Z.; Xie, X.; Zhu, B.

2017-12-01

Agricultural irrigation is considered as the major water use sector accounting for over 60% of the global freshwater withdrawals. Especially in the arid and semiarid areas, irrigation from groundwater storage substantially sustain crop growth and food security. China's Yellow River Basin (YRB) is a typical arid and semiarid area with average annual precipitation about 450 mm. In this basin, more than 52 million hm2 of arable land needs irrigation for planting wheat, cotton, paddy rice etc, and groundwater contributes over one-third irrigation water. However, agricultural irrigation remained a certain level or decreased to some degree due to water-saving technologies and returning farmland to forest projects. Then an interesting question arises: has the groundwater storage (GWS) in YRB kept a consistent variation with the agricultural irrigation? In this study, to address this question, we employed multi-source data from ground measurements, remote sensing monitoring and large-scale hydrological modeling. Specifically, groundwater storage variation was identified using Gravity Recovery and Climate Experiment (GRACE) data and ground observations, and groundwater recharge was estimated based on the Variable Infiltration Capacity (VIC) modeling. Results indicated that GWS in YRB still holds a significant depletion with a rate of about -3 mm per year during the past decade, which was consistently demonstrated by the GRACE and the ground observations. Ground water recharge shows negligible upward trends despite climate change. The roles of different sectors contributing to groundwater depletion have changed. Agricultural irrigation accounting for over 60% of groundwater depletion, but its impact decreased. However, the domestic and the industrial purposes play an increasing role in shaping groundwater depletion.

An experiment using neutron activation analysis and a rare earth element to mark cotton plants and two insects that feed on them

Energy Technology Data Exchange (ETDEWEB)

Showler, Allan T. [USDA-ARS IFNRRU, Kika de la Garza Subtropical Agricultural Research Center, 2413 East Highway 83, Weslaco, TX 78596 (United States)]. E-mail: ashowler@weslaco.ars.usda.gov; James, William D. [Elemental Analysis Laboratory, 3144 Texas A and M University, College Station, TX 77843-3144 (United States); Armstrong, John S. [USDA-ARS BIRU, Kika de la Garza Subtropical Agricultural Research Center, 2413 East Highway 83, Weslaco, TX 78596 (United States); Westbrook, John K. [USDA-ARS APMRU, 2771 F and B Road, College Station, TX 77845-4966 (United States)

2006-08-15

Studies on insect dispersal and other behaviors can benefit from using markers that will not alter flight and fitness. Rare earth elements, such as samarium (Sm), have been used as ingested markers of some insects and detected using neutron activation analysis (NAA). In this study, samarium nitrate hexahydrate was mixed into artificial diet for boll weevils, Anthonomus grandis grandis Boheman (Coleoptera: Curculionidae), at different dosages and in water used to irrigate cotton, Gossypium hirsutum L. Samarium was detected in adult boll weevils fed on the samarium-labeled diet, but not after 5 or 10 days of being switched to non-labeled diet, even if the insects were given labeled diet for as long as 7 consecutive days. Introduced in irrigation water, 1% samarium (m/m) was detectable in cotton squares and leaf tissue. However, boll weevil adults fed samarium-labeled squares did not retain detectable levels of samarium, nor did boll weevil adults reared to adulthood from samarium-labeled squares. Fourth instar beet armyworms, Spodoptera exigua (Huebner) (Noctuidae: Lepidoptera), fed on samarium-labeled cotton leaves obtained enough samarium for NAA detection, but adult moths reared from them did not have detectable amounts of samarium. Although samarium can be useful as a marker when insects are presented with a continuous pulse of the label, elements that are assimilated by the insect would be more useful if a continuous infusion of the marker cannot be provided.

Estimation of Maize photosynthesis Efficiency Under Deficit Irrigation and Mulch

International Nuclear Information System (INIS)

Al-Hadithi, S.

2004-01-01

This research aims at estimating maize photosynthesis efficiency under deficit irrigation and soil mulching. A split-split plot design experiment was conducted with three replicates during the fall season 2000 and spring season 2001 at the experimental Station of Soil Dept./ Iraq Atomic Energy Commission. The main plots were assigned to full and deficit irrigation treatments: (C) control. The deficit irrigation treatment included the omission of one irrigation at establishment (S1, 15 days), vegetation (S2, 35 days), flowering (S3, 40 days) and yield formation (S4, 30 days) stages. The sub-plots were allocated for the two varieties, Synthetic 5012 (V1) and Haybrid 2052 (V2). The sub-sub-plots were assigned to mulch (M1) with wheat straw and no mulch (M0). Results showed that the deficit irrigation did not affect photosynthesis efficiency in both seasons, which ranged between 1.90 to 2.15% in fall season and between 1.18 and 1.45% in spring season. The hybrid variety was superior 9.39 and 9.15% over synthetic variety in fall and spring seasons, respectively. Deficit irrigation, varieties and mulch had no significant effects on harvest index in both seasons. This indicates that the two varieties were stable in their partitioning efficiency of nutrient matter between plant organ and grains under the condition of this experiment. (Author) 21 refs., 3 figs., 6 tabs

Optimizing nitrogen-fertilizer application to wheat under irrigation

International Nuclear Information System (INIS)

Boaretto, A.E.; Spolidoirio, E.S.; Trivelin, P.C.O.; Muraoka, T.; Freitas, J.G. de; Cantarella, H.

2000-01-01

The responses of wheat to urea, its time of application and the fate of the applied N under irrigation were studied over 2 years. Also studied was the recovery of residual N by soybean planted in the same plots. Maximum grain productivity was obtained with 90 kg N ha -1 . Urea-N uptake ranged from 52% for application at sowing, to 85% when applied at tillering. The main loss of fertilizer N occurred as ammonia volatilized, which ranged from 5 to 12%. Loss of N by leaching was less than 1%, even with an application of 135 kg N ha -1 , which is higher than the rate locally recommended for irrigated wheat. The small leaching loss was due to little rainfall during the growing season and irrigation sufficient only to moisten the root zone. The residual N after wheat harvest represented around 40% of that applied: 21% in soil (to a depth of 60 cm), 3% in roots and 16% in the wheat straw. Soybean recovered less than 2% of the N applied to the wheat. (author)

The contribution of lakes to global inland fisheries harvest

Science.gov (United States)

Deines, Andrew M.; Bunnell, David B.; Rogers, Mark W.; Bennion, David; Woelmer, Whitney; Sayers, Michael J.; Grimm, Amanda G.; Shuchman, Robert A.; Raymer, Zachary B.; Brooks, Colin N.; Mychek-Londer, Justin G.; Taylor, William W.; Beard, Douglas

2017-01-01

Freshwater ecosystems provide numerous services for communities worldwide, including irrigation, hydropower, and municipal water; however, the services provided by inland fisheries – nourishment, employment, and recreational opportunities – are often comparatively undervalued. We provide an independent estimate of global lake harvest to improve biological and socioeconomic assessments of inland fisheries. On the basis of satellite-derived estimates of chlorophyll concentration from 80,012 globally distributed lakes, lake-specific fishing effort based on human population, and output from a Bayesian hierarchical model, we estimated that the global lake fishery harvest in the year 2011 was 8.4 million tons (mt). Our calculations excluded harvests from highly productive rivers, wetlands, and very small lakes; therefore, the true cumulative global fishery harvest from all freshwater sources likely exceeded 11 mt as reported by the Food and Agriculture Organization of the United Nations (FAO). This putative underestimate by the FAO could diminish the perceived importance of inland fisheries and perpetuate decisions that adversely affect these fisheries and millions of people.

Empty pockets, empty ponds? Disadoption of water harvesting technologies in Ethiopia

NARCIS (Netherlands)

Wakeyo, M.B.; Gardebroek, C.

2015-01-01

This study analyses disadoption of water harvesting technologies in Ethiopia where the average disadiption rate in the sample areas is as high as 42%. Given that Ethiopia is a drought-prone country with 95% of its crop production being rain-fed, such a high disadoption rate for irrigation

A short overview of measures for securing water resources for irrigated crop production

DEFF Research Database (Denmark)

Jensen, Christian Richardt; Ørum, Jens Erik; Pedersen, Søren Marcus

2014-01-01

Agriculture is the main user of limited fresh water resources in the world. Optimisation of agricultural water resources and their use can be obtained by both agronomical and political incentives. Important options are: reduction of the loss of irrigation water in conveyance before it reaches...... of the 'virtual water' principles so that water-rich regions secure food supply to dry regions; reduction in waste of food, feed and biofuel from post-harvest to the end consumer; changing of food composition to less water-consuming products; regulating amount of irrigation water by rationing, subsidies or water...... pricing to support water-saving measures such as use of drip, irrigation scheduling and DI. The potential for water saving for different measures is discussed and estimated. Reduction in waste of food and loss of irrigation water from conveyance source to farm both has a great potential for water saving...

Roles of the combined irrigation, drainage, and storage of the canal network in improving water reuse in the irrigation districts along the lower Yellow River, China

Science.gov (United States)

Liu, Lei; Luo, Yi; He, Chansheng; Lai, Jianbin; Li, Xiubin

2010-09-01

SummaryThe commonly used irrigation system in the irrigation districts (with a combined irrigation area of 3.334 × 10 6 ha) along the lower Yellow River of China is canal network. It delivers water from the Yellow River to the fields, collects surface runoff and drainage from cropland, and stores both of them for subsequent irrigation uses. This paper developed a new combined irrigation, drainage, and storage (CIDS) module for the SWAT2000 model, simulated the multiple roles of the CIDS canal system, and estimated its performance in improving water reuse in the irrigation districts under different irrigation and water diversion scenarios. The simulation results show that the annual evapotranspiration (ET) of the double-cropping winter wheat and summer maize was the highest under the full irrigation scenario (automatic irrigation), and the lowest under the no irrigation scenario. It varied between these two values when different irrigation schedules were adopted. Precipitation could only meet the water requirement of the double-cropping system by 62-96% on an annual basis; that of the winter wheat by 32-36%, summer maize by 92-123%, and cotton by 87-98% on a seasonal basis. Hence, effective irrigation management for winter wheat is critical to ensure high wheat yield in the study area. Runoff generation was closely related to precipitation and influenced by irrigation. The highest and lowest annual runoff accounted for 19% and 11% of the annual precipitation under the full irrigation and no irrigation scenarios, respectively. Nearly 70% of the annual runoff occurred during months of July and August due to the concentrated precipitation in these 2 months. The CIDS canals play an important role in delivering the diversion water from the Yellow River, intercepting the surface runoff and drainage from cropland (inflow of the CIDS canal) and recharging the shallow aquifer for later use. Roughly 14-26% of the simulated total flow in the CIDS canal system recharged

An optimization model to design and manage subsurface drip irrigation system for alfalfa

Science.gov (United States)

Kandelous, M.; Kamai, T.; Vrugt, J. A.; Simunek, J.; Hanson, B.; Hopmans, J. W.

2010-12-01

Subsurface drip irrigation (SDI) is one of the most efficient and cost-effective methods for watering alfalfa plants. Lateral installation depth and distance, emitter discharge, and irrigation time and frequency of SDI, in addition to soil and climatic conditions affect alfalfa’s root water uptake and yield. Here we use a multi-objective optimization approach to find optimal SDI strategies. Our approach uses the AMALGAM evolutionary search method, in combination with the HYDRUS-2D unsaturated flow model to maximize water uptake by alfalfa’s plant roots, and minimize loss of irrigation and drainage water to the atmosphere or groundwater. We use a variety of different objective functions to analyze SDI. These criteria include the lateral installation depth and distance, the lateral discharge, irrigation duration, and irrigation frequency. Our framework includes explicit recognition of the soil moisture status during the simulation period to make sure that the top soil is dry for harvesting during the growing season. Initial results show a wide spectrum of optimized SDI strategies for different root distributions, soil textures and climate conditions. The developed tool should be useful in helping farmers optimize their irrigation strategy and design.

Agrobacterium rhizogenes-induced cotton hairy root culture as an alternative tool for cotton functional genomics

Science.gov (United States)

Although well-accepted as the ultimate method for cotton functional genomics, Agrobacterium tumefaciens-mediated cotton transformation is not widely used for functional analyses of cotton genes and their promoters since regeneration of cotton in tissue culture is lengthy and labor intensive. In cer...

Studying Geographical Distribution Map of Weeds of Irrigated Wheat Fields of Ardabil Province

Directory of Open Access Journals (Sweden)

B Soheili

2013-12-01

Full Text Available In order to identify the density and abundance of weeds in irrigated wheat fields of Ardabil Province, 76 samples of irrigated wheat fields based on cultivation area from all counties of Ardabil province for six years (2001-2006 were selected. The genus and species of weeds from each sampling fields and their population indices density, frequency and uniformity of each species were calculated by using Thomas method. Geographic coordinates of field (Latitude, Altitude and Elevation were the main coverage and were determined by using GPS. These data were used for producing weed maps using GIS in irrigated wheat fields of Ardabil province. Results showed that bedstraw (Galium tricurnatum, Fumitory(Fumaria vaillantiand wildradish (Raphanus raphanistrum were dominant broad leaf weed species and wild oats (Avena fatua, rye (Secale cereal and mouse foxtail(Alopecurus myosuroides dominant grassy weeds species in irrigated wheat fields of Ardabil province. Bindweed (Convolvulus arvensis, Canada thistle(Cirsium arvenseand Acroptilon repens were the most important disturbing plants prior to harvesting in irrigated wheat fields of Ardabil province.

Indian Bt cotton varieties do not affect the performance of cotton aphids.

Directory of Open Access Journals (Sweden)

Nora C Lawo

Full Text Available Cotton varieties expressing Cry proteins derived from the soil bacterium Bacillus thuringiensis (Bt are grown worldwide for the management of pest Lepidoptera. To prevent non-target pest outbreaks and to retain the biological control function provided by predators and parasitoids, the potential risk that Bt crops may pose to non-target arthropods is addressed prior to their commercialization. Aphids play an important role in agricultural systems since they serve as prey or host to a number of predators and parasitoids and their honeydew is an important energy source for several arthropods. To explore possible indirect effects of Bt crops we here examined the impact of Bt cotton on aphids and their honeydew. In climate chambers we assessed the performance of cotton aphids, Aphis gossypii Glover (Hemiptera: Aphididae when grown on three Indian Bt (Cry1Ac cotton varieties (MECH 12, MECH 162, MECH 184 and their non-transformed near isolines. Furthermore, we examined whether aphids pick up the Bt protein and analyzed the sugar composition of aphid honeydew to evaluate its suitability for honeydew-feeders. Plant transformation did not have any influence on aphid performance. However, some variation was observed among the three cotton varieties which might partly be explained by the variation in trichome density. None of the aphid samples contained Bt protein. As a consequence, natural enemies that feed on aphids are not exposed to the Cry protein. A significant difference in the sugar composition of aphid honeydew was detected among cotton varieties as well as between transformed and non-transformed plants. However, it is questionable if this variation is of ecological relevance, especially as honeydew is not the only sugar source parasitoids feed on in cotton fields. Our study allows the conclusion that Bt cotton poses a negligible risk for aphid antagonists and that aphids should remain under natural control in Bt cotton fields.

MORPHOLOGICAL CHARACTERISTICS AND FORAGE PRODUCTIVITY OF IRRIGATED CACTUS PEAR UNDER DIFFERENT CUTTING INTENSITIES

Directory of Open Access Journals (Sweden)

GUILHERME FERREIRA DA COSTA LIMA

2016-01-01

Full Text Available This study evaluated the effect of different cutting intensities and years of harvesting on the morphological characteristics and production of fresh (FMP and dry matter (DMP of cactus pear cv. Gigante (Opuntia ficus-indica Mill under conditions of irrigation, high planting density and fertilization, with 12 months of regrowth. The experimental was completely randomized in a factorial design (3 × 2 with 12 replicates. The treatments were three cutting intensities (preserving the mother cladode (PMC, primary cladodes (PPC, or secondary cladodes (PSC, and two years of harvesting. The soil was classified as Cambisol Haplicum and the irrigation water was classified as C4S1 (EC 5.25 dS.m-1 density of 50,000 plants ha-1. The research evaluated plant height, number of cladodes per plant (NCP, length, width, perimeter and thickness of the cladodes, cladode area (CA, cladode area index (CAI, FMP and DMP. There was no significant interaction between treatments (P > 0.05 for the variables plant height, NCP, CAI and FMP. The variables related to cladode morphology showed a significant interaction (P < 0.05. The treatment PSC resulted in a greater DMP (P < 0.05 with a mean of 27.17 Mg ha-1 yr-1, compared to PPC (18.58 Mg ha-1 yr-1 or PMC (11.78 Mg ha-1 yr-1. The treatment PSC promoted greater NCP and forage productivity at harvest and can be considered as a management practice for the sustainability of cactus pear cv. Gigante under irrigation. The more important morphological characteristics were also influenced by the lower cutting intensities.

Wheat-yield response to irrigation and nitrogen

International Nuclear Information System (INIS)

Kirda, C.; Derici, R.; Kanber, R.; Yazar, A.; Koc, M.; Barutcular, C.

2000-01-01

Wheat-yield responses to the application of different rates of N fertilizer, under irrigated and rainfed conditions, were evaluated over four growing seasons. Nitrogen applied at tillering was utilized more effectively with proportionately less residual in the soil compared to that applied at planting. Subsequent crops of maize or cotton were positively affected by residual fertilizer N. Volatilization and leaching losses of applied N were small. Crop-water consumption showed strong positive associations with N rate. No wheat-grain-yield benefits accrued from irrigation, although straw yields were increased. Tiller production increased with N-fertilizer usage, however, tiller survival decreased at high N and was highest at 160 kg N ha -1 . Higher N rates produced higher stomatal conductance, increased rates of CO 2 assimilation and higher water-use efficiency. The CERES-Wheat growth-simulation model predicted rather closely the progress of dry-matter production, leaf area index, seasonal evapotranspiration, phenological development and of many other plant-growth attributes. The data indicated that the rate of 160 kg N ha -1 , which is commonly used by the farmers of the region, is acceptable, not only for optimum grain yields but also to minimize the risks of leaching NO 3 - to groundwater. (author)

Incidence of bacterial diseases associated with irrigation methods on onions (Allium cepa).

Science.gov (United States)

Chorolque, A; Pozzo Ardizzi, C; Pellejero, G; Aschkar, G; García Navarro, F J; Jiménez Ballesta, R

2018-04-24

In the last decade, diseases of bacterial origin in onions have increased and this has led to significant losses in production. These diseases are currently observed in both the Old and New Worlds. The aim of the experimental work reported here was to evaluate whether the irrigation method influences the incidence of diseases of bacterial origin. In cases where the inoculum was natural, the initial incidence of Soft Bacterial Rot was not manifested in any treatment in the first year, whereas at the end of the conservation period all treatments had increased incidences of infection. Sprinkler irrigation (8%) was statistically differentiated from the other treatments, for which the final incidence was similar (4.5%). For all irrigation treatments, the final incidence of Bacterial Soft Rot decreased or remained stable towards the end of the cycle, with the exception of sprinkler irrigation in 2015, which increased. It can be inferred from the results that the irrigation method does have an influence on the incidence of diseases of bacterial origin in the post-harvest stage for onions. This article is protected by copyright. All rights reserved.

Dictionary of cotton: Picking & ginning

Science.gov (United States)

Cotton is an essential commodity for textiles and has long been an important item of trade in the world’s economy. Cotton is currently grown in over 100 countries by an estimated 100 producers. The basic unit of the cotton trade is the cotton bale which consists of approximately 500 pounds of raw c...

Verde plant bug (Hemiptera: Miridae) feeding injury to cotton bolls characterized by boll age, size, and damage ratings.

Science.gov (United States)

Armstrong, J Scott; Brewer, Michael J; Parker, Roy D; Adamczyk, J J

2013-02-01

The verde plant bug, Creontiades signatus (Distant), has been present in south Texas for several years but has more recently been documented as an economic threat to cultivated cotton, (Gossypium hirsutum L. Our studies over 2 yr (2009 and 2010) and two locations (Weslaco and Corpus Christi, TX) investigated feeding-injury of the verde plant bug to a range of cotton boll age classes defined by boll diameter and accumulated degree-days (anthesis to the time of infesting) for first-position cotton bolls infested with the plant bugs. The most detrimental damage to younger cotton holls from verde plant bug feeding was boll abscission. Cotton bolls verde plant bug injured bolls compared with the controls up to 162 ACDD or a mean boll diameter 2.0 cm. Cotton seed weights were significantly reduced up to 179 ACDD or a boll diameter of 2.0 cm at Weslaco in 2009, and up to 317 ACDD or boll diameter 2.6 cm for Weslaco in 2010 when compared with the noninfested controls. Lint weight per cotton boll for infested and noninfested bolls was significantly reduced up to 262 ACDD or boll diameter 2.5 for Corpus Christi in 2010 and up to 288 ACCD or boll diameter 2.6 cm for Weslaco, TX, in 2010. Damage ratings (dependant variable) regressed against infested and noninfested seed-cotton weights showed that in every instance, the infested cotton bolls had a strong and significant relationship with damage ratings for all age classes of bolls. Damage ratings for the infested cotton bolls that did not abscise by harvest showed visual signs of verde plant bug feeding injury and the subsequent development ofboll rot; however, these two forms of injury causing lint and seed mass loss are hard to differentiate from open or boll-locked cotton bolls. Based on the results of both lint and seed loss over 2 yr and four studies cotton bolls should be protected up to approximately 300 ACDD or a boll diameter of 2.5 cm. This equilibrates to bolls that are 12-14 d of age dependent upon daily maximum

Effect of farm yard manure and nitrogen application on seed cotton yield under arid climatic conditions

International Nuclear Information System (INIS)

Anwar, M.M.

2005-01-01

The importance of farm yard manure and green manuring is well established for better crop production. The availability of farm yard manure is becoming difficult due to mechanized farming. An experiment was conducted with farm yard manure application in less quantity i.e. 5000 kg per hectare through fermenter with irrigation water as concentrated solution of farm yard manure. Four levels of nitrogen i.e. 0, 50, 100 and 150 kg/ha were applied through soil to Cotton crop planted on bed-furrows. Two years average results indicated that application of FYM at the rate of 5 metric ton per hectare through fermenter with 0, 50, 100 and 150 kgN/ha through soil increased seed cotton by 7 percent, on over all average basis of all fertilizer levels, as compared with no farm yard manure application. There was 6 percent increase with first 50 kgN/ha in the presence of FYM where as 100 kgN/ha gave 15% increase in seed cotton yield over no nitrogen application. It indicated that the efficiency of nitrogen at the rate of 100 kg/ha in the presence of farm yard manure was increased. There was 7, 15 and 20 percent increase in seed cotton with 50, 100 and 150 kgN/ha over no nitrogen on over all average basis of farm yard manure variables. Benefit cost ratio was more with FYM application alone.(author)

Effect of Supplementary Irrigation on Yield, Yield Components and Protein Percentages of Chickpea Cultivars in Ilam, Iran

Directory of Open Access Journals (Sweden)

A. Maleki

2012-01-01

Full Text Available In order to study the effect of supplementary irrigation on yield, yield components and protein percentages of three cultivars of chickpea an experiment carried out as split plot, based on randomized complete blocks design, with three replications in Ilam, in 2009-2010 growing season. Irrigation treatments were: control, without irrigation (I0, irrigation at the stage of %50 blooming, irrigation at the stage of %50 flowering, irrigation at the stage of pods filling, which were allocated to main plots and genotypes, ILC482, Filip93-93 and local variety to sub plots. Irrigation treatments had significantly effect on seed and biological yields, harvest index, pod numbers per plant, seed numbers per pod and 100 seed weight. The Filip93-93 produced highest (1140.51 kg/ha and the local variety lowest seed yields (1056.98 kg/ha.Irrigation at the stage of pod filling and blooming increased by seed yield %41.3 and %29.3 respectively as  compared to control .Irrigation at the pod filling period produced the highest seed yield. The Filip93-93 produced highest yield (1263.31 kg/ha when the field irrigated at pod filling stage and the local variety at control treatment (without irrigation the lowest seed yield (893.26 kg/ha.

Irrigation Water Sources and Time Intervals as Variables on the Presence of Campylobacter spp. and Listeria monocytogenes on Romaine Lettuce Grown in Muck Soil.

Science.gov (United States)

Guévremont, Evelyne; Lamoureux, Lisyanne; Généreux, Mylène; Côté, Caroline

2017-07-01

Irrigation water has been identified as a possible source of vegetable contamination by foodborne pathogens. Risk management for pathogens such as Campylobacter spp. and Listeria monocytogenes in fields can be influenced by the source of the irrigation water and the time interval between last irrigation and harvest. Plots of romaine lettuce were irrigated with manure-contaminated water or aerated pond water 21, 7, or 3 days prior to harvesting, and water and muck soil samples were collected at each irrigation treatment. Lettuce samples were collected at the end of the trials. The samples were tested for the presence of Campylobacter spp. and L. monocytogenes. Campylobacter coli was isolated from 33% of hog manure samples (n = 9) and from 11% of the contaminated water samples (n = 27), but no lettuce samples were positive (n = 288). L. monocytogenes was not found in manure, and only one sample of manure-contaminated irrigation water (n = 27) and one lettuce sample (n = 288) were positive. No Campylobacter or L. monocytogenes was recovered from the soil samples (n = 288). Because of the low incidence of pathogens, it was not possible to link the contamination of either soil or lettuce with the type of irrigation water. Nevertheless, experimental field trials mimicking real conditions provide new insights into the survival of two significant foodborne pathogens on romaine lettuce.

Reconstructing the Spatio-Temporal Development of Irrigation Systems in Uzbekistan Using Landsat Time Series

Directory of Open Access Journals (Sweden)

Thomas Koellner

2012-12-01

Full Text Available The expansion of irrigated agriculture during the Soviet Union (SU era made Central Asia a leading cotton production region in the world. However, the successor states of the SU in Central Asia face on-going environmental damages and soil degradation that are endangering the sustainability of agricultural production. With Landsat MSS and TM data from 1972/73, 1977, 1987, 1998, and 2000 the expansion and densification of the irrigated cropland could be reconstructed in the Kashkadarya Province of Uzbekistan, Central Asia. Classification trees were generated by interpreting multitemporal normalized difference vegetation index data and crop phenological knowledge. Assessments based on image-derived validation samples showed good accuracy. Official statistics were found to be of limited use for analyzing the plausibility of the results, because they hardly represent the area that is cropped in the very dry study region. The cropping area increased from 134,800 ha in 1972/73 to 470,000 ha in 2009. Overlaying a historical soil map illustrated that initially sierozems were preferred for irrigated agriculture, but later the less favorable solonchaks and solonetzs were also explored, illustrating the strategy of agricultural expansion in the Aral Sea Basin. Winter wheat cultivation doubled between 1987 and 1998 to approximately 211,000 ha demonstrating its growing relevance for modern Uzbekistan. The spatial-temporal approach used enhances the understanding of natural conditions before irrigation is employed and supports decision-making for investments in irrigation infrastructure and land cultivation throughout the Landsat era.

The halo effect: suppression of pink bollworm on non-Bt cotton by Bt cotton in China.

Directory of Open Access Journals (Sweden)

Peng Wan

Full Text Available In some previously reported cases, transgenic crops producing insecticidal proteins from Bacillus thuringiensis (Bt have suppressed insect pests not only in fields planted with such crops, but also regionally on host plants that do not produce Bt toxins. Here we used 16 years of field data to determine if Bt cotton caused this "halo effect" against pink bollworm (Pectinophora gossypiella in six provinces of the Yangtze River Valley of China. In this region, the percentage of cotton hectares planted with Bt cotton increased from 9% in 2000 to 94% in 2009 and 2010. We found that Bt cotton significantly decreased the population density of pink bollworm on non-Bt cotton, with net decreases of 91% for eggs and 95% for larvae on non-Bt cotton after 11 years of Bt cotton use. Insecticide sprays targeting pink bollworm and cotton bollworm (Helicoverpa armigera decreased by 69%. Previously reported evidence of the early stages of evolution of pink bollworm resistance to Bt cotton in China has raised concerns that if unchecked, such resistance could eventually diminish or eliminate the benefits of Bt cotton. The results reported here suggest that it might be possible to find a percentage of Bt cotton lower than the current level that causes sufficient regional pest suppression and reduces the risk of resistance.

Estimation of Truck Trips on Large-Scale Irrigation Project: A Combinatory Input-Output Commodity-Based Approach

Directory of Open Access Journals (Sweden)

Ackchai Sirikijpanichkul

2015-01-01

Full Text Available For the agricultural-based countries, the requirement on transportation infrastructure should not only be limited to accommodate general traffic but also the transportation of crop and agricultural products during the harvest seasons. Most of the past researches focus on the development of truck trip estimation techniques for urban, statewide, or nationwide freight movement but neglect the importance of rural freight movement which contributes to pavement deterioration on rural roads especially during harvest seasons. Recently, the Thai Government initiated a plan to construct a network of reservoirs within the northeastern region, aiming at improving existing irrigation system particularly in the areas where a more effective irrigation system is needed. It is expected to bring in new opportunities on expanding the cultivation areas, increasing the economy of scale and enlarging the extent market of area. As a consequence, its effects on truck trip generation needed to be investigated to assure the service quality of related transportation infrastructure. This paper proposes a combinatory input-output commodity-based approach to estimate truck trips on rural highway infrastructure network. The large-scale irrigation project for the northeastern of Thailand is demonstrated as a case study.

Phenology of German Chamomile and its Changes under Different Irrigation Regimes and Plant Densities

Directory of Open Access Journals (Sweden)

Alireza PIRZAD

2010-03-01

Full Text Available In order to definite growth stages of Matricaria chamomilla L., 40 plants were planted with 200 � 200 cm distance from each other. To determine the phenology under different water stress condition and plant densities, an experiment was conducted in factorial based on randomized complete block design with two factors including irrigation at 4 levels (25, 50, 75, and 100 mm evaporation from pan class A, and plant density at 5 levels (cultivation in 30 cm rows with 5, 10, 15, 20 and 25 cm intra-row spaces with three replications. Definition of growth stages including the maximum number of nodes, sub stems and tillers were 21, 20 and 14 that were occurred at 970, 1088 and 1088 oC growth degree-days, respectively. The numbers of nodes were 28.6, 30.0, 30.2 and 27.8, of sub stem were 19.2, 18.4, 19.8 and 18.4; and of tillers were 14.8, 14.0, 15.0 and 14.4 that were obtained from irrigation at 25, 50, 75, and 100 mm evaporation from pan, respectively. In the other hand, the number of nodes as follow 28.25, 29.00, 29.75, 29.75 and 29.00; sub stem as 17.50, 20.00, 20.75, 19.00 and 17.50; and tillers were 15.00, 13.50, 14.75, 14.00 and 15.50 that were obtained from 5, 10, 15, 20 and 25 cm intra-row spacing, respectively. Differences by irrigation on GDDs values were observed at the second harvest. However the earliest observation of flower and seed receiving at the first harvest occurred on 5 cm intra-row spacing. These changes were identical by GDDs for second harvest of flower, but with mild slope of reduction. There were no differences in number of leaves and tillers among irrigation levels and plant densities.

Detecting mismatches in the phenology of cotton bollworm larvae and cotton flowering in response to climate change

Science.gov (United States)

Huang, Jian; Hao, HongFei

2018-05-01

Current evidence suggests that climate change has directly affected the phenology of many invertebrate species associated with agriculture. Such changes in phenology have the potential to cause temporal mismatches between predators and prey and may lead to a disruption in natural pest control ecosystem. Understanding the synchrony between pest insects and host plant responses to climate change is a key step to improve integrated pest management strategies. Cotton bollworm larvae damage cotton, and thus, data from Magaiti County, China, collected during the period of 1990-2015 were analyzed to assess the effects of climate change on cotton bollworm larvae and cotton flowering. The results showed that a warming climate advanced the phenology of cotton bollworm larvae and cotton flowering. However, the phenological rate of change was faster in cotton bollworm larvae than that in cotton flowering, and the larval period was prolonged, resulting in a great increase of the larval population. The abrupt phenological changes in cotton bollworm larvae occurred earlier than that in cotton, and the abrupt phenological changes in cotton flowering occurred earlier than that in larval abundance. However, the timing of abrupt changes in larval abundance all occurred later than that in temperature. Thus, the abrupt changes that occurred in larvae, cotton flowering and climate were asynchronous. The interval days between the cotton flowering date (CFD) and the half-amount larvae date (HLD) expanded by 3.41 and 4.41 days with a 1 °C increase of T mean in May and June, respectively. The asynchrony between cotton bollworm larvae and cotton flowering will likely broaden as the climate changes. The effective temperature in March and April and the end date of larvae (ED) were the primary factors affecting asynchrony.

Detecting mismatches in the phenology of cotton bollworm larvae and cotton flowering in response to climate change.

Science.gov (United States)

Huang, Jian; Hao, HongFei

2018-05-11

Current evidence suggests that climate change has directly affected the phenology of many invertebrate species associated with agriculture. Such changes in phenology have the potential to cause temporal mismatches between predators and prey and may lead to a disruption in natural pest control ecosystem. Understanding the synchrony between pest insects and host plant responses to climate change is a key step to improve integrated pest management strategies. Cotton bollworm larvae damage cotton, and thus, data from Magaiti County, China, collected during the period of 1990-2015 were analyzed to assess the effects of climate change on cotton bollworm larvae and cotton flowering. The results showed that a warming climate advanced the phenology of cotton bollworm larvae and cotton flowering. However, the phenological rate of change was faster in cotton bollworm larvae than that in cotton flowering, and the larval period was prolonged, resulting in a great increase of the larval population. The abrupt phenological changes in cotton bollworm larvae occurred earlier than that in cotton, and the abrupt phenological changes in cotton flowering occurred earlier than that in larval abundance. However, the timing of abrupt changes in larval abundance all occurred later than that in temperature. Thus, the abrupt changes that occurred in larvae, cotton flowering and climate were asynchronous. The interval days between the cotton flowering date (CFD) and the half-amount larvae date (HLD) expanded by 3.41 and 4.41 days with a 1 °C increase of T mean in May and June, respectively. The asynchrony between cotton bollworm larvae and cotton flowering will likely broaden as the climate changes. The effective temperature in March and April and the end date of larvae (ED) were the primary factors affecting asynchrony.

Cotton transformation via pollen tube pathway.

Science.gov (United States)

Wang, Min; Zhang, Baohong; Wang, Qinglian

2013-01-01

Although many gene transfer methods have been employed for successfully obtaining transgenic cotton, the major constraint in cotton improvement is the limitation of genotype because the majority of transgenic methods require plant regeneration from a single transformed cell which is limited by cotton tissue culture. Comparing with other plant species, it is difficult to induce plant regeneration from cotton; currently, only a limited number of cotton cultivars can be cultured for obtaining regenerated plants. Thus, development of a simple and genotype-independent genetic transformation method is particularly important for cotton community. In this chapter, we present a simple, cost-efficient, and genotype-independent cotton transformation method-pollen tube pathway-mediated transformation. This method uses pollen tube pathway to deliver transgene into cotton embryo sacs and then insert foreign genes into cotton genome. There are three major steps for pollen tube pathway-mediated genetic transformation, which include injection of -foreign genes into pollen tube, integration of foreign genes into plant genome, and selection of transgenic plants.

Desert water harvesting to benefit wildlife: a simple, cheap, and durable sub-surface water harvester for remote locations.

Science.gov (United States)

Rice, William E

2004-12-01

A sub-surface desert water harvester was constructed in the sagebrush steppe habitat of south-central Idaho, U.S.A. The desert water harvester utilizes a buried micro-catchment and three buried storage tanks to augment water for wildlife during the dry season. In this region, mean annual precipitation (MAP) ranges between about 150-250 mm (6"-10"), 70% of which falls during the cold season, November to May. Mid-summer through early autumn, June through October, is the dry portion of the year. During this period, the sub-surface water harvester provides supplemental water for wildlife for 30-90 days, depending upon the precipitation that year. The desert water harvester is constructed with commonly available, "over the counter" materials. The micro-catchment is made of a square-shaped, 20 mL. "PERMALON" polyethylene pond liner (approximately 22.9 m x 22.9 m = 523 m2) buried at a depth of about 60 cm. A PVC pipe connects the harvester with two storage tanks and a drinking trough. The total capacity of the water harvester is about 4777 L (1262 U.S. gallons) which includes three underground storage tanks, a trough and pipes. The drinking trough is refined with an access ramp for birds and small animals. The technology is simple, cheap, and durable and can be adapted to other uses, e.g. drip irrigation, short-term water for small livestock, poultry farming etc. The desert water harvester can be used to concentrate and collect water from precipitation and run-off in semi-arid and arid regions. Water harvested in such a relatively small area will not impact the ground water table but it should help to grow small areas of crops or vegetables to aid villagers in self-sufficiency.

Sub-soil microbial activity under rotational cotton crops in Australia

Science.gov (United States)

Polain, Katherine; Knox, Oliver; Wilson, Brian; Pereg, Lily

2016-04-01

Soil microbial communities contribute significantly to soil organic matter formation, stabilisation and destabilisation, through nutrient cycling and biodegradation. The majority of soil microbial research examines the processes occurring in the top 0 cm to 30 cm of the soil, where organic nutrients are easily accessible. In soils such as Vertosols, the high clay content causes swelling and cracking. When soil cracking is coupled with rain or an irrigation event, a flush of organic nutrients can move down the soil profile, becoming available for subsoil microbial community use and potentially making a significant contribution to nutrient cycling and biodegradation in soils. At present, the mechanisms and rates of soil nutrient turnover (such as carbon and nitrogen) at depth under cotton rotations are mostly speculative and the process-response relationships remain unclear, although they are undoubtedly underpinned by microbial activity. Our research aims to determine the contribution and role of soil microbiota to the accumulation, cycling and mineralisation of carbon and nitrogen through the whole root profile under continuous cotton (Gossypium hirsutum) and cotton-maize rotations in regional New South Wales, Australia. Through seasonal work, we have established both baseline and potential microbial activity rates from 0 cm to 100 cm down the Vertosol profile, using respiration and colourimetric methods. Further whole soil profile analyses will include determination of microbial biomass and isotopic carbon signatures using phospholipid fatty acid (PLFA) methodology, identification of microbial communities (sequencing) and novel experiments to investigate potential rates of nitrogen mineralisation and quantification of associated genes. Our preliminary observations and the hypotheses tested in this three-year study will be presented.

Effect of Timing of Potassium Application on Millet (Setaria italica Yield and Grain Protein Content in Different Irrigation Regimes

Directory of Open Access Journals (Sweden)

A. Hayati

2011-05-01

Full Text Available The research on reducing the water consumption in conventional cropping system is one of the important strategies to improve the water use efficiency in agriculture. In order to investigate the effect of time of potassium application under different irrigation regimes on millet grain yield and protein percent, a field experiment was carried out in Agricultural Research Center of Yasuj, Iran, in 2009. The experiment was conducted as split plot design in a randomized complete blocks design with 3 replications. Irrigation regime included 7, 14 and 21-day intervals as main factor and sub-plots included time of potassium fertilizer application in four stages: planting, tillering, stem development and flowering. The results showed that the effect of irrigation interval was significant on 1000-seed weight, grain and biological yield, number of grains per spike, harvest index, protein content, and chlorophyll a, b and total of leaves. By increasing the irrigation interval, all the above-mentioned traits decreased, except the protein percent that increased. The 1000-seed weight, grain and biological yield, harvest index and protein content were affected significantly by the time of potassium application. Maximum grain yield was obtained by interaction of 7- day irrigation interval and potassium application at the stem development stage. Maximum grain protein content was measured in potassium application at flowering stage. In general, increasing the irrigation interval, and subsequent water stress, reduced plant growth and yield components. Application of potassium fertilizer at early growth stages increased yield and yield components, while in reproductive stages increased seed quality.

Effect of Irrigation Intervalsand Plantingdate on Agronomic Characteristics of Degen and Drfi (Securiger securidaca L. in Birjand Region

Directory of Open Access Journals (Sweden)

h Tabiei

2014-07-01

Full Text Available Degen & Drfiis a plant that has medicinal and nutritional importance. Degen&Drfi and countless of plants in this genus had application for medicinal uses such as weight loss and diabetes control. Its seeds also contain protein and lipids as well as some starchy foods are consumed. In order to investigate the effect of irrigation regime and planting date on agronomic characteristics of Degen&Drfi a field experiment carried out in region of kahi, Birjand, south khorasan, Iran, 2010. The experiment was conducted in split plot design in a randomized complete block with four replications. Irrigation regime, including: six, twelve and eighteen days' intervals as main factors and planting Date at four levels (20, 25, 30 April, and5 May were devoted to sub-plots. Analysis of variance showed that irrigation regime for all treatment, had more significant influence on trait including plant height, number of pods per plant, seeds per pod, biomass, grain yield and harvest index, and had significant influence the yield of flowers per plant and weight seed. The highest amounts of each trait were gained from 12 days interval irrigation. The effect of planting date was significant all treatment for all traits except 1000-seed weight. Planting in 20 April had highest values of characteristics. Interaction between irrigation and planting date were significant for number of stems, flowers and pods per plant, biomass, harvest index and grain yield at 1% and plant height at 5% level. The highest seed yield was obtained from irrigation in 12 days interval and planting in the 20 April. Results showed that irrigation in 12 days interval and planting especially in late April are the best treatment forDegen&Drfi production.

Problems and countermeasures on the safety of rainwater harvesting for drinking in China

Directory of Open Access Journals (Sweden)

Liu Laisheng

2016-01-01

Full Text Available China is increasingly confronted with serious water shortages, so rainwater harvesting and utilization have gradually received attention with advantages such as accessibility, simple operation and low cost. The harvested rainwater can be used for drinking, irrigation, municipal greening, etc., and when applied for drinking, the demand for water quality is highest. Most existing researches have put their focus on improving the accumulation of rainwater, but there is a lack of in-depth studies on how to enhance the quality of rainwater. Based on the above considerations, this paper, by summing up the situation of rainwater harvesting and utilization in China, has systematically analyzed the system components of rainwater harvesting for drinking, i.e., the consisting units of rainwater harvesting, delivering, processing and accumulating. It also explains the sources of rainwater pollution and how to deal with it. Considering that the water harvesting system can make a contribution to the society and public welfare, this paper proposes a framework of participatory management for projects of rainwater harvesting for drinking.

Effects of fertilisation and irrigation practices on yield, maturity and storability of onions

Directory of Open Access Journals (Sweden)

T. SUOJALA

2008-12-01

Full Text Available The study aimed to establish whether a high onion yield and good storage performance could be obtained with low fertilisation rates if irrigation was applied when necessary. Two-year experiments investigated the effects of three NPK fertiliser levels (N 50, 100, 125/150 kg/ha, with and without irrigation, on yield, advancement of maturity, storage losses and shelf life. High fertilisation advanced maturity but irrigation had no effect. High fertilisation increased yield only in 1996 (5B7%, but irrigation increased the yield noticeably: by 33.5% in 1995 and 8.5% in 1996. There was no interaction between fertilisation and irrigation. The low fertilisation optimum is attributed to the mineralisation of soil nitrogen, as the soil was rich in organic matter. At the low fertilisation level, plants took up twice as much nitrogen as present in the fertiliser, and with increased fertilisation the nitrogen uptake increased markedly. The foliage nitrogen content was low, evidently as a result of late harvesting. Treatments had only a minor effect on the storage performance and shelf life of onions. The results suggest that fertilisation rates could be reduced in onion production. Irrigation during warm and dry periods is essential to achieve the maximum yield potential and does not impair the storage quality of onions.;

Field-Based Estimates of Global Warming Potential in Bioenergy Systems of Hawaii: Crop Choice and Deficit Irrigation.

Directory of Open Access Journals (Sweden)

Meghan N Pawlowski

Full Text Available Replacing fossil fuel with biofuel is environmentally viable from a climate change perspective only if the net greenhouse gas (GHG footprint of the system is reduced. The effects of replacing annual arable crops with perennial bioenergy feedstocks on net GHG production and soil carbon (C stock are critical to the system-level balance. Here, we compared GHG flux, crop yield, root biomass, and soil C stock under two potential tropical, perennial grass biofuel feedstocks: conventional sugarcane and ratoon-harvested, zero-tillage napiergrass. Evaluations were conducted at two irrigation levels, 100% of plantation application and at a 50% deficit. Peaks and troughs of GHG emission followed agronomic events such as ratoon harvest of napiergrass and fertilization. Yet, net GHG flux was dominated by carbon dioxide (CO2, as methane was oxidized and nitrous oxide (N2O emission was very low even following fertilization. High N2O fluxes that frequently negate other greenhouse gas benefits that come from replacing fossil fuels with agronomic forms of bioenergy were mitigated by efficient water and fertilizer management, including direct injection of fertilizer into buried irrigation lines. From soil intensively cultivated for a century in sugarcane, soil C stock and root biomass increased rapidly following cultivation in grasses selected for robust root systems and drought tolerance. The net soil C increase over the two-year crop cycle was three-fold greater than the annualized soil surface CO2 flux. Deficit irrigation reduced yield, but increased soil C accumulation as proportionately more photosynthetic resources were allocated belowground. In the first two years of cultivation napiergrass did not increase net greenhouse warming potential (GWP compared to sugarcane, and has the advantage of multiple ratoon harvests per year and less negative effects of deficit irrigation to yield.

Field-Based Estimates of Global Warming Potential in Bioenergy Systems of Hawaii: Crop Choice and Deficit Irrigation.

Science.gov (United States)

Pawlowski, Meghan N; Crow, Susan E; Meki, Manyowa N; Kiniry, James R; Taylor, Andrew D; Ogoshi, Richard; Youkhana, Adel; Nakahata, Mae

2017-01-01

Replacing fossil fuel with biofuel is environmentally viable from a climate change perspective only if the net greenhouse gas (GHG) footprint of the system is reduced. The effects of replacing annual arable crops with perennial bioenergy feedstocks on net GHG production and soil carbon (C) stock are critical to the system-level balance. Here, we compared GHG flux, crop yield, root biomass, and soil C stock under two potential tropical, perennial grass biofuel feedstocks: conventional sugarcane and ratoon-harvested, zero-tillage napiergrass. Evaluations were conducted at two irrigation levels, 100% of plantation application and at a 50% deficit. Peaks and troughs of GHG emission followed agronomic events such as ratoon harvest of napiergrass and fertilization. Yet, net GHG flux was dominated by carbon dioxide (CO2), as methane was oxidized and nitrous oxide (N2O) emission was very low even following fertilization. High N2O fluxes that frequently negate other greenhouse gas benefits that come from replacing fossil fuels with agronomic forms of bioenergy were mitigated by efficient water and fertilizer management, including direct injection of fertilizer into buried irrigation lines. From soil intensively cultivated for a century in sugarcane, soil C stock and root biomass increased rapidly following cultivation in grasses selected for robust root systems and drought tolerance. The net soil C increase over the two-year crop cycle was three-fold greater than the annualized soil surface CO2 flux. Deficit irrigation reduced yield, but increased soil C accumulation as proportionately more photosynthetic resources were allocated belowground. In the first two years of cultivation napiergrass did not increase net greenhouse warming potential (GWP) compared to sugarcane, and has the advantage of multiple ratoon harvests per year and less negative effects of deficit irrigation to yield.

Irrigation water quality influences heavy metal uptake by willows in biosolids.

Science.gov (United States)

Laidlaw, W Scott; Baker, Alan J M; Gregory, David; Arndt, Stefan K

2015-05-15

Phytoextraction is an effective method to remediate heavy metal contaminated landscapes but is often applied for single metal contaminants. Plants used for phytoextraction may not always be able to grow in drier environments without irrigation. This study investigated if willows (Salix x reichardtii A. Kerner) can be used for phytoextraction of multiple metals in biosolids, an end-product of the wastewater treatment process, and if irrigation with reclaimed and freshwater influences the extraction process. A plantation of willows was established directly onto a tilled stockpile of metal-contaminated biosolids and irrigated with slightly saline reclaimed water (EC ∼2 dS/cm) at a wastewater processing plant in Victoria, Australia. Biomass was harvested annually and analysed for heavy metal content. Phytoextraction of cadmium, copper, nickel and zinc was benchmarked against freshwater irrigated willows. The minimum irrigation rate of 700 mm per growing season was sufficient for willows to grow and extract metals. Increasing irrigation rates produced no differences in total biomass and also no differences in the extraction of heavy metals. The reclaimed water reduced both the salinity and the acidity of the biosolids significantly within the first 12 months after irrigation commenced and after three seasons the salinity of the biosolids had dropped to metal extraction. Reclaimed water irrigation reduced the biosolid pH and this was associated with reductions of the extraction of Ni and Zn, it did not influence the extraction of Cu and enhanced the phytoextraction of Cd, which was probably related to the high chloride content of the reclaimed water. Our results demonstrate that flood-irrigation with reclaimed water was a successful treatment to grow willows in a dry climate. However, the reclaimed water can also change biosolids properties, which will influence the effectiveness of willows to extract different metals. Copyright © 2015 Elsevier Ltd. All rights

Influence of different irrigation and nitrogen levels on crude oil and fatty acid composition of maize (Zea mays L.)

International Nuclear Information System (INIS)

Kaplan, M.; Kale, H.; Karaman, K.; Unlukara, A.

2017-01-01

The effect of irrigation and nitrogen fertilizer levels on the crude oil and fatty acid composition of maize cultivars was studied. Three levels of irrigation (50, 75 and 100% of field capacity) and nitrogen (100, 200 and 300 kg·ha-1) were used for treatment groups. After harvest, the crude oils were extracted and fatty acid profiles were determined by Gas Chromatography system. The study was repeated for two years and the interaction effects of fertilizer and irrigation were determined. Our results show that the crude oil content was affected positively by the fertilizer and the irrigation applications. As expected, the most abundant fatty acid was linoleic and the harvest year did not alter it. The highest linoleic acid content value was obtained with a 50% field capacity and 300 kg·ha-1 fertilizer treatment combination. In addition, fatty acid contents varied with the changing of interaction effects except for myristic and palmitic acid. Oleic acid was the second abundant fatty acid in the oil samples and the lowest oleic acid value was obtained with a 50% field capacity and 300 kg·ha-1 fertilizer treatment combination. Oleic acid content tended to increase with 75% field capacity but 100% field capacity treatment decreased in it. [es

Socio-economic impacts of irrigated agriculture in Mbarali District of south west Tanzania

Science.gov (United States)

Mwakalila, Shadrack

Irrigation has been found to be central in curbing food scarcity not only in Tanzania but also in many other developing countries. It has been proved that continued reliability on rainfall in agriculture cannot sustain the increase in population. This study examines the impacts of smallholder irrigated agriculture in improving social and economic benefits in Igurusi Ward of Mbarali District which is located in the southern-western part of Tanzania. The study applies the Participatory Rural Appraisal Framework for data collection. The study was confined to five villages in Igurusi ward which are Majenje, Igurusi, Chamoto, Uhambule and Mahango. The study examined critically paddy production for smallholder farmers that practice irrigation and those who cultivates rain-fed paddy. The study examined both existing traditional and modern irrigation systems. It was found that, most of the respondents (79%) practice irrigated agriculture in paddy production while the remaining 21% practice rain-fed agriculture. Forty percent of households that practice irrigated agriculture harvest paddy two seasons per year. The return to labour in paddy production for smallholder farmers who irrigate their paddy fields is about US 2.5/manday which is above the poverty line of US 1.0/day. The smallest return to labour (US $ 0.85/manday) is obtained by an average smallholder farmer who cultivates rain-fed paddy using hand hoe and family labour. The potential implication of the current irrigation systems is that if irrigation is managed properly it may lead to sustainable increases in small farmer’s productivity and income, thus alleviating rural poverty.

Potassium-phosphorus relationships in cotton (gossypium hirsutum L.) as affected by potassium nutrition

International Nuclear Information System (INIS)

Makhdum, M.I.; Ashraf, M.

2007-01-01

Field studies were undertaken to determine the interrelationship between potassium (K+) concentration in various organs of plant and phosphorus (P) content as influenced by K-nutrition in cotton. The experiment was conducted on Miani soil series silt loam and classified as Calcaric Cambisols, fine silty, mixed Hyperthermic Fluventic Haplocambids. The treatments consisted .of (a) four cotton (Gossypium hirsutum L.) cultivars (CI.M-448, CIM-IIOO, Karishma, S-12); and (b) four potassium fertilizer doses (0, 62.5, 125.0, 250.0 kg K ha-l). The design of experiment was split plot (main: cultivars, sub-plot: K-doses). The plant samples were collected at five stages of growth, i.e., first flower bud., first flower, peak flowering, first boll split and maturity. The various parts of plants were analyzed for phosphorus and potassium concentration at various stages of growth. Phosphorus concentration in leaves, stems, burs, seed and lint decreased with concurrent increase in K-doses. Crop maintained 0.22% phosphorus concentration in leaf tissues at first flower bud and dropped to 0.11% at maturity. Cultivars differed greatly amongst themselves in terms of maintaining P content in their different parts. Averaged across K-doses, cv. CIM-448 maintained the highest P content in all parts than other cultivars. There was a negative and significant correlation co-efficient between K and P concentration in various parts of the plant. The study demonstrated antagonistic interaction between K+ and P in cotton plant under irrigated conditions. (author)

Correlation Coefficient, Path Analysis and Drought Tolerance Indices for Different Wheat Cultivars under Deficit Irrigation Conditions of Isfahan Region

Directory of Open Access Journals (Sweden)

H. R Salemi

2017-06-01

Full Text Available Introduction Water crisis as a main factor of agronomy limitation exists in all over the arid and semiarid regions such as Isfahan province which is located in the central part of the Zayandehrud River Basin. This study aimed to use path analysis and indices of drought to evaluate the correlation coefficients between main physiological parameter (grain yield with yield components and water use efficiency of winter wheat under three water conditions. Materials and Methods The experiment was carried out in Kaboutar Abad Agricultural Research Station, Isfahan in the central region of Iran (32º 31’N, 51º 51’E is located at the altitude of 1545 m above the sea level with a split plot in a randomized complete block design (RCBD with three replications in three cropping seasons on irrigated wheat cultivars. The treatments were included three levels of irrigation (60%FI, 80%FI and full irrigation as main plots and six wheat cultivars (Pishtaz, Shiraz, Sepahan, Marvdasht, Mahdavi and BC-Roshan as sub plots. Grain yield, straw and stubble, biological yield, harvest index (H.I., productivity degree (P.D., water use efficiency (WUE, plant height, grain number per spike, spike number per m2 and TGW were determined. Winter wheat cultivars were sown at the beginning of November and harvested in mid-June of the following year. The seed rate was 400 seed m-2, with a row spacing of 0.75 m. The first irrigation was by furrow method, implemented one day after seeding. Seeds emergence was observed about 5 days later. The N application was 250, 200 and 300 kgha-1 of N (urea at 46% N for each year divided into installments (10 days before planting, 30 days after planting, and every 30 days until the last irrigation. The P2O5 (phosphate ammonium and super-phosphate triple application to soil was 200, 100 and 50 kg ha-1 during the 3 years, respectively. At this stage, cultivation was done to mix the fertilizers with top soil manually. Pests and weeds were

Identification of a New Cotton Disease Caused by an Atypical Cotton Leafroll Dwarf Virus in Argentina.

Science.gov (United States)

Agrofoglio, Yamila C; Delfosse, Verónica C; Casse, María F; Hopp, Horacio E; Kresic, Iván Bonacic; Distéfano, Ana J

2017-03-01

An outbreak of a new disease occurred in cotton (Gossypium hirsutum) fields in northwest Argentina starting in the 2009-10 growing season and is still spreading steadily. The characteristic symptoms of the disease included slight leaf rolling and a bushy phenotype in the upper part of the plant. In this study, we determined the complete nucleotide sequences of two independent virus genomes isolated from cotton blue disease (CBD)-resistant and -susceptible cotton varieties. This virus genome comprised 5,866 nucleotides with an organization similar to that of the genus Polerovirus and was closely related to cotton leafroll dwarf virus, with protein identity ranging from 88 to 98%. The virus was subsequently transmitted to a CBD-resistant cotton variety using Aphis gossypii and symptoms were successfully reproduced. To study the persistence of the virus, we analyzed symptomatic plants from CBD-resistant varieties from different cotton-growing fields between 2013 and 2015 and showed the presence of the same virus strain. In addition, a constructed full-length infectious cDNA clone from the virus caused disease symptoms in systemic leaves of CBD-resistant cotton plants. Altogether, the new leafroll disease in CBD-resistant cotton plants is caused by an atypical cotton leafroll dwarf virus.

Oxygation enhances growth, gas exchange and salt tolerance of vegetable soybean and cotton in a saline vertisol.

Science.gov (United States)

Bhattarai, Surya P; Midmore, David J

2009-07-01

Impacts of salinity become severe when the soil is deficient in oxygen. Oxygation (using aerated water for subsurface drip irrigation of crop) could minimize the impact of salinity on plants under oxygen-limiting soil environments. Pot experiments were conducted to evaluate the effects of oxygation (12% air volume/volume of water) on vegetable soybean (moderately salt tolerant) and cotton (salt tolerant) in a salinized vertisol at 2, 8, 14, 20 dS/m EC(e). In vegetable soybean, oxygation increased above ground biomass yield and water use efficiency (WUE) by 13% and 22%, respectively, compared with the control. Higher yield with oxygation was accompanied by greater plant height and stem diameter and reduced specific leaf area and leaf Na+ and Cl- concentrations. In cotton, oxygation increased lint yield and WUE by 18% and 16%, respectively, compared with the control, and was accompanied by greater canopy light interception, plant height and stem diameter. Oxygation also led to a greater rate of photosynthesis, higher relative water content in the leaf, reduced crop water stress index and lower leaf water potential. It did not, however, affect leaf Na+ or Cl- concentration. Oxygation invariably increased, whereas salinity reduced the K+ : Na+ ratio in the leaves of both species. Oxygation improved yield and WUE performance of salt tolerant and moderately tolerant crops under saline soil environments, and this may have a significant impact for irrigated agriculture where saline soils pose constraints to crop production.

Soil microflora and enzyme activities in rhizosphere of Transgenic Bt cotton hybrid under different intercropping systems and plant protection schedules

Science.gov (United States)

Biradar, D. P.; Alagawadi, A. R.; Basavanneppa, M. A.; Udikeri, S. S.

2012-04-01

Field experiments were conducted over three rainy seasons of 2005-06 to 2007-08 on a Vertisol at Dharwad, Karnataka, India to study the effect of intercropping and plant protection schedules on productivity, soil microflora and enzyme activities in the rhizosphere of transgenic Bt cotton hybrid. The experiment consisted of four intercropping systems namely, Bt cotton + okra, Bt cotton + chilli, Bt cotton + onion + chilli and Bt cotton + redgram with four plant protection schedules (zero protection, protection for Bt cotton, protection for intercrop and protection for both crops). Observations on microbial populations and enzyme activities were recorded at 45, 90, 135 and 185 (at harvest) days after sowing (DAS). Averaged over years, Bt cotton + okra intercropping had significantly higher total productivity than Bt cotton + chilli and Bt cotton + redgram intercropping system and was similar to Bt cotton + chilli + onion intercropping system. With respect to plant protection schedules for bollworms, protection for both cotton and intercrops recorded significantly higher yield than the rest of the treatments. Population of total bacteria, fungi, actinomycetes, P-solubilizers, free-living N2 fixers as well as urease, phosphatase and dehydrogenase enzyme activities increased up to 135 days of crop growth followed by a decline. Among the intercropping systems, Bt cotton + chilli recorded significantly higher population of microorganisms and enzyme activities than other cropping systems. While Bt cotton with okra as intercrop recorded the least population of total bacteria and free-living N2 fixers as well as urease activity. Intercropping with redgram resulted in the least population of actinomycetes, fungi and P-solubilizers, whereas Bt cotton with chilli and onion recorded least activities of dehydrogenase and phosphatase. Among the plant protection schedules, zero protection recorded maximum population of microorganisms and enzyme activities. This was followed by the

Superoleophobic cotton textiles

NARCIS (Netherlands)

Leng, B.; Shao, Z.; With, de G.; Ming, W.

2009-01-01

Common cotton textiles are hydrophilic and oleophilic in nature. Superhydrophobic cotton textiles have the potential to be used as self-cleaning fabrics, but they typically are not super oil-repellent. Poor oil repellency may easily compromise the self-cleaning property of these fabrics. Here, we

7 CFR 1205.319 - Cotton-producing region.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Cotton-producing region. 1205.319 Section 1205.319... Cotton Research and Promotion Order Definitions § 1205.319 Cotton-producing region. Cotton-producing region means each of the following groups of cotton-producing States: (a) Southeast Region: Alabama...

Examining cotton in rotation with rice and cotton in rotation with other crops using natural experiment

Science.gov (United States)

Sun, Ling; Zhu, Zesheng

2017-08-01

This paper is to show the ability of remote sensing image analysis combined with statistical analysis to characterize the environmental risk assessment of cotton in rotation with rice and cotton in rotation with other crops in two ways: (1) description of rotation period of cotton in rotation with rice and cotton in rotation with other crops by the observational study or natural experiment; (2) analysis of rotation period calculation of cotton in rotation with rice and cotton in rotation with other crops. Natural experimental results show that this new method is very promising for determining crop rotation period for estimating regional averages of environmental risk. When it is applied to determining crop rotation period, two requested remote sensing images of regional crop are required at least.

Assessing Salinity in Cotton and Tomato Plants by Using Reflectance Spectroscopy

Science.gov (United States)

Goldshleger, Naftaly

2016-04-01

Irrigated lands in semi-arid and arid areas are subjected to salinization processes. An example of this phenomenon is the Jezreel Valley in northern Israel where soil salinity has increased over the years. The increase in soil salinity results in the deterioration of the soil structure and crops damage. In this experiment we quantified the relation between the chemical and spectral features of cotton and tomato plants and their mutual relationship to soil salinity. The experiment was carried out as part of ongoing research aiming to detect and monitor saline soils and vegetation by combining different remote sensing methods. The aim of this study was to use vegetation reflectance measurements to predict foliar Cl and Na concentration and assess salinity in the soil and in vegetation by their reflectance measurements. The model developed for determining concentrations of chlorine and sodium in tomato and cotton produced good results ( R2 = 0.92 for sodium and 0.85 for chlorine in tomato and R2 = 0.84 for sodium and 0.82 for chlorine in cotton). Lately, we extend the method to calculate vegetation salinity, by doing correlation between the reflectance slopes of the tested crops CL and Na from two research areas. The developed model produced a good results for all the data (R2=0.74) Our method can be implemented to assess vegetation salinity ahead of planting, and developed as a generic tool for broader use for agriculture in semi-arid regions. In our opinion these results show the possibility of monitoring for a threshold level of salinity in tomato and cotton leaves so remedial action can be taken in time to prevent crop damage. Our results strongly suggest that future imaging spectroscopy remote sensing measurements collected by airborne and satellite platforms could measure the salinity of soil and vegetation over larger areas. These results can be the first steps for generic a model which includes more vegetation for salinity measurements.

Transgenic cotton expressing Cry10Aa toxin confers high resistance to the cotton boll weevil.

Science.gov (United States)

Ribeiro, Thuanne Pires; Arraes, Fabricio Barbosa Monteiro; Lourenço-Tessutti, Isabela Tristan; Silva, Marilia Santos; Lisei-de-Sá, Maria Eugênia; Lucena, Wagner Alexandre; Macedo, Leonardo Lima Pepino; Lima, Janaina Nascimento; Santos Amorim, Regina Maria; Artico, Sinara; Alves-Ferreira, Márcio; Mattar Silva, Maria Cristina; Grossi-de-Sa, Maria Fatima

2017-08-01

Genetically modified (GM) cotton plants that effectively control cotton boll weevil (CBW), which is the most destructive cotton insect pest in South America, are reported here for the first time. This work presents the successful development of a new GM cotton with high resistance to CBW conferred by Cry10Aa toxin, a protein encoded by entomopathogenic Bacillus thuringiensis (Bt) gene. The plant transformation vector harbouring cry10Aa gene driven by the cotton ubiquitination-related promoter uceA1.7 was introduced into a Brazilian cotton cultivar by biolistic transformation. Quantitative PCR (qPCR) assays revealed high transcription levels of cry10Aa in both T 0 GM cotton leaf and flower bud tissues. Southern blot and qPCR-based 2 -ΔΔCt analyses revealed that T 0 GM plants had either one or two transgene copies. Quantitative and qualitative analyses of Cry10Aa protein expression showed variable protein expression levels in both flower buds and leaves tissues of T 0 GM cotton plants, ranging from approximately 3.0 to 14.0 μg g -1 fresh tissue. CBW susceptibility bioassays, performed by feeding adults and larvae with T 0 GM cotton leaves and flower buds, respectively, demonstrated a significant entomotoxic effect and a high level of CBW mortality (up to 100%). Molecular analysis revealed that transgene stability and entomotoxic effect to CBW were maintained in T 1 generation as the Cry10Aa toxin expression levels remained high in both tissues, ranging from 4.05 to 19.57 μg g -1 fresh tissue, and the CBW mortality rate remained around 100%. In conclusion, these Cry10Aa GM cotton plants represent a great advance in the control of the devastating CBW insect pest and can substantially impact cotton agribusiness. © 2017 The Authors. Plant Biotechnology Journal published by Society for Experimental Biology and The Association of Applied Biologists and John Wiley & Sons Ltd.

Application of drip irrigation technology for producing fruit of Salak ‘Gula Pasir’ (Salacca zalacca var. Gula Pasir off season on dry land

Directory of Open Access Journals (Sweden)

I N Rai

2014-10-01

Full Text Available Naturally, Salak Gula Pasir (Salacca zalacca var. Gula Pasir is flowering every three months or four times a year, but only one or two flowering seasons that the flowers can develop into fruit. The condition causes Salak Gula Pasir is available in the market in a short period (only 2-3 months i.e. at the time of harvest (on-season from December to February. This seasonal nature of Salak Gula Pasir occurs because Salak Gula Pasir is planted on dry land where irrigation depends only on rainfall, and drought occurs when water is shortage so that the plant internal water content is low that causes a high failure development rate of flower to become fruit (fruit-set failure. This study was aimed to overcome the fruit-set failure by providing drip irrigation. Two treatments (with drip irrigation and without drip irrigation/control with sixteen replicates were tested at Salak Gula Pasir production centre (at Sibetan village, Bebandem District, of Karangasem Regency, Bali at two harvest seasons, i.e. Gadu (July and Sela II (October. The results showed that the plant provided with drip irrigation significantly yielded fruit-set percentage higher that that without drip irrigation, both in Gadu and Sela II seasons. The percentages of fruit-set in Gadu and Sela II seasons provided with drip irrigation were 75.30% and 93.13%, respectively, while those without drip irrigation were only 59.94% and 61.67%, respectively. The increase of fruit-set observed for drip irrigation treatment associated with the increase of leaf chlorophyll content, relative water content (RWC of leaves, and leaf N, P, and K contents. The increase of fruit-set led to higher number of fruits and fruit weight per plant under drip irrigation than that without drip irrigation. Based on the results of this study, drip irrigation can be applied to produce Salak Gula Pasir planted out of season on dry land.

Rainwater harvesting and management in rainfed agricultural systems in sub-Saharan Africa - A review

Science.gov (United States)

Biazin, Birhanu; Sterk, Geert; Temesgen, Melesse; Abdulkedir, Abdu; Stroosnijder, Leo

Agricultural water scarcity in the predominantly rainfed agricultural system of sub-Saharan Africa (SSA) is more related to the variability of rainfall and excessive non-productive losses, than the total annual precipitation in the growing season. Less than 15% of the terrestrial precipitation takes the form of productive ‘green’ transpiration. Hence, rainwater harvesting and management (RWHM) technologies hold a significant potential for improving rainwater-use efficiency and sustaining rainfed agriculture in the region. This paper outlines the various RWHM techniques being practiced in SSA, and reviews recent research results on the performance of selected practices. So far, micro-catchment and in situ rainwater harvesting techniques are more common than rainwater irrigation techniques from macro-catchment systems. Depending on rainfall patterns and local soil characteristics, appropriate application of in situ and micro-catchment techniques could improve the soil water content of the rooting zone by up to 30%. Up to sixfold crop yields have been obtained through combinations of rainwater harvesting and fertiliser use, as compared to traditional practices. Supplemental irrigation of rainfed agriculture through rainwater harvesting not only reduces the risk of total crop failure due to dry spells, but also substantially improves water and crop productivity. Depending on the type of crop and the seasonal rainfall pattern, the application of RWHM techniques makes net profits more possible, compared to the meagre profit or net loss of existing systems. Implementation of rainwater harvesting may allow cereal-based smallholder farmers to shift to diversified crops, hence improving household food security, dietary status, and economic return. The much needed green revolution and adaptations to climate change in SSA should blend rainwater harvesting ideals with agronomic principles. More efforts are needed to improve the indigenous practices, and to disseminate best

[Effect of mineral N fertilizer reduction and organic fertilizer substitution on soil biological properties and aggregate characteristics in drip-irrigated cotton field.

Science.gov (United States)

Li, Rui; Tai, Rui; Wang, Dan; Chu, Gui-Xin

2017-10-01

A four year field study was conducted to determine how soil biological properties and soil aggregate stability changed when organic fertilizer and biofertilizer were used to reduce chemical fertilizer application to a drip irrigated cotton field. The study consisted of six fertilization treatments: unfertilized (CK); chemical fertilizer (CF, 300 kg N·hm -2 ; 90 kg P2O5 · hm -2 , 60 kg K2 O·hm -2 ); 80% CF plus 3000 kg·hm -2 organic fertilizer (80%CF+OF); 60% CF plus 6000 kg·hm -2 organic fertilizer (60%CF+OF); 80% CF plus 3000 kg·hm -2 biofertilizer (80%CF+BF); and 60% CF plus 6000 kg·hm -2 biofertilizer (60%CF+BF). The relationships among soil organic C, soil biological properties, and soil aggregate size distribution were determined. The results showed that organic fertilizer and biofertilizer both significantly increased soil enzyme activities. Compared with CF, the biofertilizer treatments increased urease activity by 55.6%-84.0%, alkaline phosphatise activity by 53.1%-74.0%, invertase activity by 15.1%-38.0%, β-glucosidase activity by 38.2%-68.0%, polyphenoloxidase activity by 29.6%-52.0%, and arylsulfatase activity by 35.4%-58.9%. Soil enzyme activity increased as the amount of organic fertilizer and biofertilizer increased (i.e., 60%CF+OF > 80%CF+OF, 60%CF+BF > 80%CF+BF). Soil basal respiration decreased significantly in the order BF > OF > CF > CK. Soil microbial biomass C and N were 22.3% and 43.5% greater, respectively, in 60%CF+BF than in CF. The microbial biomass C:N was significantly lower in 60%CF+BF than in CF. The organic fertilizer and the biofertilizer both improved soil aggregate structure. Soil mass in the >0.25 mm fraction was 7.1% greater in 80%CF+OF and 8.0% greater in (60%CF+OF) than in CF. The geometric mean diameter was 9.2% greater in 80%CF+BF than in 80%CF+OF. Redundancy analysis and cluster analysis both demonstrated that soil aggregate structure and biological activities increased when organic fertilizer and biofertilizer were

Early warning of cotton bollworm resistance associated with intensive planting of Bt cotton in China.

Directory of Open Access Journals (Sweden)

Haonan Zhang

Full Text Available Transgenic crops producing Bacillus thuringiensis (Bt toxins kill some key insect pests, but evolution of resistance by pests can reduce their efficacy. The predominant strategy for delaying pest resistance to Bt crops requires refuges of non-Bt host plants to promote survival of susceptible pests. To delay pest resistance to transgenic cotton producing Bt toxin Cry1Ac, farmers in the United States and Australia planted refuges of non-Bt cotton, while farmers in China have relied on "natural" refuges of non-Bt host plants other than cotton. Here we report data from a 2010 survey showing field-evolved resistance to Cry1Ac of the major target pest, cotton bollworm (Helicoverpa armigera, in northern China. Laboratory bioassay results show that susceptibility to Cry1Ac was significantly lower in 13 field populations from northern China, where Bt cotton has been planted intensively, than in two populations from sites in northwestern China where exposure to Bt cotton has been limited. Susceptibility to Bt toxin Cry2Ab did not differ between northern and northwestern China, demonstrating that resistance to Cry1Ac did not cause cross-resistance to Cry2Ab, and implying that resistance to Cry1Ac in northern China is a specific adaptation caused by exposure to this toxin in Bt cotton. Despite the resistance detected in laboratory bioassays, control failures of Bt cotton have not been reported in China. This early warning may spur proactive countermeasures, including a switch to transgenic cotton producing two or more toxins distinct from Cry1A toxins.

The added value of a water footprint approach: Micro- and macroeconomic analysis of cotton production, processing and export in water bound Uzbekistan

Science.gov (United States)

Rudenko, I.; Bekchanov, M.; Djanibekov, U.; Lamers, J. P. A.

2013-11-01

Since independence from the former Soviet Union in 1991, Uzbekistan is challenged to consolidate its efforts and identify and introduce suitable agricultural policies to ease the threat of advancing land, water and ecosystem deterioration. On the one hand, irrigated cotton production provides income, food and energy sources for a large part of the rural households, which accounts for about 70% of the total population. On the other hand, this sector is considered a major driver of the on-going environmental degradation. Due to this dual nature, an integrated approach is needed that allows the analyses of the cotton sector at different stages and, consequently, deriving comprehensive options for action. The findings of the economic based value chain analysis and ecologically-oriented water footprint analysis on regional level were complemented with the findings of an input-output model on national level. This combination gave an added value for better-informed decision-making to reach land, water and ecosystem sustainability, compared to the individual results of each approach. The synergy of approaches pointed at various options for actions, such as to (i) promote the shift of water use from the high water consuming agricultural sector to a less water consuming cotton processing sector, (ii) increase overall water use efficiency by expanding the highly water productive industrial sectors and concurrently decreasing sectors with inefficient water use, and (iii) reduce agricultural water use by improving irrigation and conveyance efficiencies. The findings showed that increasing water use efficiency, manufacturing products with higher value added and raising water users' awareness of the real value of water are essential for providing water security in Uzbekistan.

Farm Size and the Share of Irrigated Land in total Landholding: the case of Water-Harvesting Irrigation in Ethiopia

NARCIS (Netherlands)

Wakeyo, M.B.; Gardebroek, C.

2011-01-01

Rain-fall shortage constrains production in small-holder agriculture in developing countries and with ongoing climate change these shortages may increase. Rain-water harvesting are interesting technologies that decrease this risk. Therefore, one would expect an increasing use of these technologies

Effect of Phosphorus Fertilizer and Water Stress on Protein and Phenolic Contents in Cotton (Gossypium Hirsutum L.)

International Nuclear Information System (INIS)

Abbas, Z.; Muhammad, S.; Murtaza, G.; Ahmad, I.; Shakeel, A.; Islam, M.; Ahmad, M.; Abdullah, M.

2015-01-01

Crop quality and production are affected by various fertilizers and water stress. In present research, the response of cotton variety CIM-496 to water stress and phosphorus fertilizer was investigated. Samples were collected after 90 days of planting. Kjeldahl method and thin layer chromatography (TLC) were used for the quantitative and qualitative analysis of total protein and phenolic compounds, respectively. Proteins were greatly affected by fertilizer treatment and water stress, but phenolic compounds remained unchanged upon fertilizer treatment. However, they were greatly affected by irrigation and water stress. Crop treated with 100 kg ha/sup -1/ P/sub 2/O/sub 5/ under water stress maintained high protein content as compared to unfertilized and no water stress treatments. However, phenolic compounds were found higher in fully irrigated plants as compared to water stress ones. Fertilizer treatments had no considerable effect on phenolic compounds. (author)

The Impacts of U.S. Cotton Programs on the West and Central African Countries Cotton Export Earnings

OpenAIRE

Fadiga, Mohamadou L.; Mohanty, Samarendu; Pan, Suwen

2005-01-01

This study uses a stochastic simulation approach based on a partial equilibrium structural econometric model of the world fiber market to examine the effects of a removal of U.S. cotton programs on the world market. The effects on world cotton prices and African export earnings were analyzed. The results suggest that on average an elimination of U.S. cotton programs would lead to a marginal increase in the world cotton prices thus resulting in minimal gain for cotton exporting countries in Af...

Determination of actual crop evapotranspiration (ETc) and dual crop coefficients (Kc) for cotton, wheat and maize in Fergana Valley: integration of the FAO-56 approach and BUDGET

Science.gov (United States)

Kenjabaev, Shavkat; Dernedde, Yvonne; Frede, Hans-Georg; Stulina, Galina

2014-05-01

Determination of the actual crop evapotranspiration (ETc) during the growing period is important for accurate irrigation scheduling in arid and semi-arid regions. Development of a crop coefficient (Kc) can enhance ETc estimations in relation to specific crop phenological development. This research was conducted to determine daily and growth-stage-specific Kc and ETc values for cotton (Gossypium hirsutum L.), winter wheat (Triticum aestivum L.) and maize (Zea mays L.) for silage at fields in Fergana Valley (Uzbekistan). The soil water balance model - Budget with integration of the dual crop procedure of the FAO-56 was used to estimate the ETc and separate it into evaporation (Ec) and transpiration (Tc) components. An empirical equation was developed to determine the daily Kc values based on the estimated Ec and Tc. The ETc, Kc determination and comparison to existing FAO Kc values were performed based on 10, 5 and 6 study cases for cotton, wheat and maize, respectively. Mean seasonal amounts of crop water consumption in terms of ETc were 560±50, 509±27 and 243±39 mm for cotton, wheat and maize, respectively. The growth-stage-specific Kc for cotton, wheat and maize was 0.15, 0.27 and 0.11 at initial; 1.15, 1.03 and 0.56 at mid; and 0.45, 0.89 and 0.53 at late season stages. These values correspond to those reported by the FAO-56. Development of site specific Kc helps tremendously in irrigation management and furthermore provides precise water applications in the region. The developed simple approach to estimate daily Kc for the three main crops grown in the Fergana region was a first attempt to meet this issue. Keywords: Actual crop evapotranspiration, evaporation and transpiration, crop coefficient, model BUDGET, Fergana Valley.

Locally Grown: Examining Attitudes and Perceptions About Organic Cotton Production and Manufacturing Between Mississippi Cotton Growers and Consumers

Directory of Open Access Journals (Sweden)

Charles Freeman

2016-06-01

Full Text Available The purpose of this study is to examine attitudes and perceptions about organic cotton of Mississippi cotton growers and producers in comparison to fashion-conscious consumers, including advantages/disadvantages of growing and production processes, quality control, consumer preferences, and competitive price structures/profit margins. A sample size of 16 local Mississippi growers and/or producers and 44 undergraduate students at a mid-major Southeastern university were chosen to participate in the study. Instruments were developed based on current research and the definition of organic cotton production defined by the United States Department of Agriculture. Results indicate 75% of growers and producers do not perceive a quality difference between organic and conventionally grown cotton, while 72.7% of the consumers report organically grown cotton is capable of producing a higher quality product compared to conventionally grown cotton. Even with an increase in organic cotton prices (25- 40% higher premium, only 25% of growers and producers would be willing to convert, while a majority (52.3% of consumers would not be willing to spend more than 25% extra for an organically grown cotton product. Consumers indicate the negative effects of conventionally grown cotton, yet many report little knowledge about organic cotton production, while growers/producers immediately dismiss organically grown cotton as a retail marketing strategy.

Post-harvest technologies for various crops of pakistan: status quo, employment generation and prospects

International Nuclear Information System (INIS)

Ahmad, M.

2005-01-01

The climatic conditions of Pakistan vary from tropical to temperate, allow 40 different kinds of vegetables, 21 type of fruit, and 5 major crops (wheat, cotton, rice, sugarcane, and maize) to grow. During the peak harvest-season, a great proportion of fresh agricultural/horticultural produce is lost, due to unavailability of suitable post-harvest technologies. An effort was made to present the status quo, constraints, Government policies and possible post-harvest technologies that can be developed/adopted in the country to generate employment in the rural areas. Secondary processing-industry (flour mills, sugar mills, oil mills etc.) is fairly developed in the country. However. primary processing of agricultural produce is poorly developed in the country. The higher cost of the processed products, consumers habits of eating fresh commodities, seasonability of fresh fruit and vegetables, and low quality of the processed products are the key-constraints for the slow growth of post-harvest processing industry. By removing these constraints, and by developing/adopting various technologies, identified in this paper, we may help to establish post-harvest processing industry on sound footings. Consequently, the employment-opportunities will increase in the rural areas of the country. (author)

Impacts of irrigation regimes with saline water on carrot productivity and soil salinity

Directory of Open Access Journals (Sweden)

Kamel Nagaz

2012-01-01

Full Text Available A three-year study was conducted to evaluate the effects of different irrigation regimes with saline water on soil salinity, yield and water productivity of carrot as a fall-winter crop under actual commercial-farming conditions in the arid region of Tunisia. Carrot was grown on a sandy soil and surface-irrigated with a water having an ECi of 3.6 dS/m. For the three years, a complete randomized block design with four replicates was used to evaluate five irrigation regimes. Four irrigation methods were based on the use of soil water balance (SWB to estimate irrigation amounts and timing while the fifth consisted of using traditional farmers practices. SWB methods consisted in replacement of cumulated ETc when readily available water is depleted with levels of 100% (FI-100, 80% (DI-80 and 60% (DI-60. FI-100 was considered as full irrigation while DI-80 and DI-60 were considered as deficit irrigation regimes. Regulated deficit irrigation regime where 40% reduction is applied only during ripening stage (FI-DI60 was also used. Farmer method (Farmer consisted in giving fixed amounts of water (25 mm every 7 days from planting till harvest. Results on carrot production and soil salinization are globally consistent between the three-year experiments and shows significant difference between irrigation regimes. Higher soil salinity in the root zone is observed at harvest under DI-60 (3.1, 3.4, 3.9 dS/m, respectively, for the three years and farmer irrigation (3.3, 3.6, 3.9 dS/m treatments compared to FI-100 treatment (2.3, 2.6 and 3.1 dS/m. Relatively low ECe values were also observed under FI-DI60 and DI-80 treatments with respectively (2.7, 3, 3.5 dS/m and (2.5, 2.9, 3.3 dS/m. ECe values under the different irrigation treatments were generally lower than or equal to the EC of irrigation water used. Rainfall received during fall and/or winter periods (57, 26 and 29 mm, respectively, during the three years contributed probably to leaching soluble

The Effect of Rate and Application Method of Potassium on Yield and Yield Components of Cotton in Saline Condition

Directory of Open Access Journals (Sweden)

A Ardakani

2016-12-01

flowering (25P+25V+50F, and 25% at planting+50% at vegetative stage and 25%at early boll development (25P+50V+25B as the subplot. The seeds planted had been acid-delinted and treated with chemicals against seed and seedling diseases. Plots consisted of six rows spaced 0.5 min row and 0.2 m in plant (10 plants m-2 and 6 m in length. To evaluate yield components of cotton including plant height, sympodial branch number, boll number, boll weight, 10 individual plants were selected randomly from final harvest area. At harvesting time one meter square from the beginning and a half meter around each plot was removed as a marginal effect. The remaining area was harvested by hand for determine of lint and biological yield. Seed-cotton samples were ginned to separate the fiber (lint from the seed. Lint percentage (% was calculated as the weight of lint to weight of the seed-cotton. The statistical analyses were performed by SAS software Ver. 9.1. The mean separation was done through Fischer least significant difference (FLSD test at alpha 0.05. Results and Discussion Analysis of variance showed that boll weight, seed cotton yield and biological yield were significantly affected by potassium rate, whereas plant height, number of sympodial branch, boll number and lint percentage was not affected by potassium rate. All traits were affected by potassium application method except plant height and lint percentage. Plant height, boll weight, seed cotton yield and lint percentage were affected by interaction of potassium rate and application method. Increasing of K level up to 150 kg ha-1 increased boll weight (23.64%, seed cotton yield (17.67%, and biological yield (9.86% in comparison with the application of 75 kg ha-1. Plant height, sympodial branch number and lint percentage did not respond to K rate. K application as 25% at planting+25% at vegetative stage (5-8 leaves stage, 25% at first flowering and 25% at early boll development (25P+25V+25F+25B had the highest boll weight, seed

Superamphiphobic cotton fabrics with enhanced stability

Energy Technology Data Exchange (ETDEWEB)

Xu, Bi, E-mail: xubi@dhu.edu.cn [National Engineering Research Center for Dyeing and Finishing of Textiles, Donghua University, Shanghai 201620 (China); Key Laboratory of Science & Technology of Eco-Textile, Ministry of Education, Donghua University, Shanghai 201620 (China); College of Chemistry, Chemical Engineering and Biotechnology, Donghua University, Shanghai 201620 (China); Ding, Yinyan; Qu, Shaobo [College of Chemistry, Chemical Engineering and Biotechnology, Donghua University, Shanghai 201620 (China); Cai, Zaisheng, E-mail: zshcai@dhu.edu [College of Chemistry, Chemical Engineering and Biotechnology, Donghua University, Shanghai 201620 (China)

2015-11-30

Highlights: • Superamphiphobic cotton fabrics were prepared. • Water and hexadecane contact angels reach to 164.4° and 156.3°, respectively. • Nanoporous organically modified silica alcogel particles were synthesized. • The superamphiphobic cotton fabrics exhibit enhanced stability against abrasion, laundering and acid. - Abstract: Superamphiphobic cotton fabrics were prepared by alternately depositing organically modified silica alcogel (ormosil) particles onto chitosan precoated cotton fabrics and subsequent 1H, 1H, 2H, 2H-perfluorooctyltrimethoxysilane (PFOTMS) modification. Transmission electron microscopy and scanning electron microscopy images reveal that the ormosil particles display a fluffy, sponge-like nanoporous structure, and the entire cotton fiber surface is covered with highly porous networks. PFOTMS acts as not only a modifier to lower the surface energy of the cotton fabric but also a binder to enhance the coating stability against abrasion and washing. The treated cotton fabrics show highly liquid repellency with the water, cooking oil and hexadecane contact angels reaching to 164.4°, 160.1° and 156.3°, respectively. Meanwhile, the treated cotton fabrics exhibit good abrasion resistance and high laundering durability, which can withstand 10,000 cycles of abrasion and 30 cycles of machine wash without apparently changing the superamphiphobicity. The superamphiphobic cotton fabric also shows high acid stability, and can withstand 98% H{sub 2}SO{sub 4}. Moreover, the superamphiphobic coating has almost no influence on the other physical properties of the cotton fabrics including tensile strength, whiteness and air permeability. This durable non-wetting surface may provide a wide range of new applications in the future.

Water productivity analysis of sand dams irrigation farming in northern Ethiopia

Directory of Open Access Journals (Sweden)

Lorenzo Villani

2018-06-01

Full Text Available Water scarcity in drylands is the main problem that has to be tackled by farmers and practitioners that work in these areas. Climate change and increased and wealthier population are expected to put additional stress on the water resource. A large number of studies is calling to focus efforts to enhance water productivity (WP, and one of the most promising option is represented by water harvesting, the collection and storage of runoff water to be used for beneficially uses. Among the available technologies, sand dams are experiencing a renovated interest because of their relative simplicity and their potential. This research aims to deepen the knowledge about WP of water harvesting systems studying a sand dam irrigation system in Tigray, north Ethiopia, where farmers are getting used to this new technology. The research was carried out in the period March-April 2017, when farmers use sand dams water to irrigate off-season maize. We analysed a representative plot irrigated through a shallow well drilled in the sand dam aquifer, in terms of yield, Crop Water Productivity (CWP, Crop Water Productivity based on Evapotranspiration (CWP(ET and Economic Water Productivity (EWP, through field data analysis and a validated Aquacrop model. CWP(ET was found to be low (1.12 kg of grain per m3 of evapotranspired water, due by both inefficient water application and low soil fertility. Aquacrop model results showed that changing the irrigation schedule can increase CWP(ET up to 1.35 kg/m3 and EWP up to 3.94 birr/m3, but yield gap is mainly due to the low soil fertility. Interventions on soil fertility can raise yields from the original 3.3 up to 8.5 kg/ha, and thus CWP(ET and EWP up to 2.94 kg/m3 and 9.54 birr/m3 respectively. To enhance the effect of sand dams in northern Ethiopia, a set of measures, including conservation agriculture, is then proposed.

Assessment of Climate Change Impacts and Evaluation of Adaptation Strategies for Grain Sorghum and Cotton Production in the Texas High Plains

Science.gov (United States)

Kothari, K.; Ale, S.; Bordovsky, J.; Hoogenboom, G.; Munster, C. L.

2017-12-01

The semi-arid Texas High Plains (THP) is one of the most productive agricultural regions in the United States. However, agriculture in the THP is faced with the challenges of rapid groundwater depletion in the underlying Ogallala Aquifer, restrictions on pumping groundwater, recurring droughts, and projected warmer and drier future climatic conditions. Therefore, it is imperative to adopt strategies that enhance climate change resilience of THP agriculture to maintain a sustainable agricultural economy in this region. The overall goal of this study is to assess the impacts of climate change and potential reduction in groundwater availability on production of two major crops in the region, cotton and grain sorghum, and suggest adaptation strategies using the Decision Support System for Agrotechnology Transfer (DSSAT) Cropping System Model. The DSSAT model was calibrated and evaluated using data from the long-term cotton-sorghum rotation experiments conducted at Helms Farm near Halfway in the THP. After achieving a satisfactory calibration for crop yield (RMSE MACA) projected future climate datasets from nine CMIP5 global climate models (GCMs) and two representative concentration pathways (RCP 4.5 and 8.5) were used in this study. Preliminary results indicated a reduction in irrigated grain sorghum yield per hectare by 6% and 8%, and a reduction in dryland sorghum yield per hectare by 9% and 17% under RCP 4.5 and RCP 8.5 scenarios, respectively. Grain sorghum future water use declined by about 2% and 5% under RCP 4.5 and RCP 8.5, respectively. Climate change impacts on cotton production and evaluation of several adaptation strategies such as incorporating heat and drought tolerances in cultivars, early planting, shifting to short season varieties, and deficit irrigation are currently being studied.

Optimized Subsurface Irrigation System: The Future of Sugarcane Irrigation

Directory of Open Access Journals (Sweden)

M. H. J. P. Gunarathna

2018-03-01

Full Text Available Climate change may harm the growth and yield of sugarcane (Saccharum officinarum L. without the introduction of appropriate irrigation facilities. Therefore, new irrigation methods should be developed to maximize water use efficiency and reduce operational costs. OPSIS (optimized subsurface irrigation system is a new solar-powered automatic subsurface irrigation system that creates a phreatic zone below crop roots and relies on capillarity to supply water to the root zone. It is designed for upland crops such as sugarcane. We investigated the performance of OPSIS for irrigating sugarcane and evaluated its performance against sprinkler irrigation under subtropical conditions. We conducted field experiments in Okinawa, Japan, over the period from 2013 to 2016 and took measurements during spring- and summer-planted main crops and two ratoon crops of the spring-planted crop. Compared with sprinkler irrigation, OPSIS produced a significantly higher fresh cane yield, consumed less irrigation water and provided a higher irrigation water use efficiency. We conclude that OPSIS could be adopted as a sustainable solution to sugarcane irrigation in Okinawa and similar environments.

U.S. Cotton Prices and the World Cotton Market: Forecasting and Structural Change

OpenAIRE

Isengildina-Massa, Olga; MacDonald, Stephen

2009-01-01

The purpose of this study was to analyze structural changes that took place in the cotton industry in recent years and develop a statistical model that reflects the current drivers of U.S. cotton prices. Legislative changes authorized the U.S. Department of Agriculture to resume publishing cotton price forecasts for the first time in 79 years. In addition, systematic problems have become apparent in the forecasting models used by USDA and elsewhere, highlighting the need for an updated review...

Assessment of Suitable Areas for Home Gardens for Irrigation Potential, Water Availability, and Water-Lifting Technologies

Directory of Open Access Journals (Sweden)

Tewodros Assefa

2018-04-01

Full Text Available The study was conducted in Lake Tana Basin of Ethiopia to assess potentially irrigable areas for home gardens, water availability, and feasibility of water-lifting technologies. A GIS-based Multi-Criteria Evaluation (MCE technique was applied to access the potential of surface and groundwater sources for irrigation. The factors affecting irrigation practice were identified and feasibility of water-lifting technologies was evaluated. Pairwise method and expert’s opinion were used to assign weights for each factor. The result showed that about 345,000 ha and 135,000 ha of land were found suitable for irrigation from the surface and groundwater sources, respectively. The rivers could address about 1–1.2% of the irrigable land during dry season without water storage structure whereas groundwater could address about 2.2–2.4% of the irrigable land, both using conventional irrigation techniques. If the seven major dams within the basin were considered, surface water potential would be increased and satisfy about 21% of the irrigable land. If rainwater harvesting techniques were used, about 76% of the basin would be suitable for irrigation. The potential of surface and groundwater was evaluated with respect to water requirements of dominant crops in the region. On the other hand, rope pump and deep well piston hand pump were found with relatively the most (26% and the least (9% applicable low-cost water-lifting technologies in the basin.

Cotton (Gossypium hirsutum L.).

Science.gov (United States)

Rathore, Keerti S; Campbell, LeAnne M; Sherwood, Shanna; Nunes, Eugenia

2015-01-01

Cotton continues to be a crop of great economic importance in many developing and some developed countries. Cotton plants expressing the Bt gene to deter some of the major pests have been enthusiastically and widely accepted by the farmers in three of the major producing countries, i.e., China, India, and the USA. Considering the constraints related to its production and the wide variety of products derived from the cotton plant, it offers several target traits that can be improved through genetic engineering. Thus, there is a great need to accelerate the application of biotechnological tools for cotton improvement. This requires a simple, yet robust gene delivery/transformant recovery system. Recently, a protocol, involving large-scale, mechanical isolation of embryonic axes from germinating cottonseeds followed by direct transformation of the meristematic cells has been developed by an industrial laboratory. However, complexity of the mechanical device and the patent restrictions are likely to keep this method out of reach of most academic laboratories. In this chapter, we describe the method developed in our laboratory that has undergone further refinements and involves Agrobacterium-mediated transformation of cotton cells, selection of stable transgenic callus lines, and recovery of plants via somatic embryogenesis.

Non-contact image processing for gin trash sensors in stripper harvested cotton with burr and fine trash correction

Science.gov (United States)

This study was initiated to provide the basis for obtaining online information as to the levels of the various types of gin trash. The objective is to provide the ginner with knowledge of the quantity of the various trash components in the raw uncleaned seed cotton. This information is currently not...

The water footprint of cotton consumption: An assessment of the impact of worldwide consumption of cotton products on the water resources in the cotton producing countries

NARCIS (Netherlands)

Chapagain, Ashok; Hoekstra, Arjen Ysbert; Savenije, H.H.G.; Gautam, R.

2006-01-01

The consumption of a cotton product is connected to a chain of impacts on the water resources in the countries where cotton is grown and processed. The aim of this paper is to assess the ‘water footprint’ of worldwide cotton consumption, identifying both the location and the character of the

Separation and recycling of cotton from cotton/PET blends by depolymerization of PET catalyzed by bases and ionic liquids

NARCIS (Netherlands)

Bouwhuis, G.H. (Gerrit); Brinks, G.J. (Ger); Groeneveld, R.A.J. (Richard); Oelerich, J. (Jens)

2014-01-01

The recycling of post consumer cotton textile waste is highly requested, due to the high environmental impact of cotton production. Often cotton is mixed in blends with polyethylene terephthalate (PET). For the generation of high value products from recycled cotton, it essential that PET is

HEAVY METALS AND MICRONUTRIENTS IN THE SOIL AND GRAPEVINE UNDER DIFFERENT IRRIGATION STRATEGIES

Directory of Open Access Journals (Sweden)

Vanessa de Souza Oliveira

2015-02-01

Full Text Available Soils under natural conditions have heavy metals in variable concentrations and there may be an increase in these elements as a result of the agricultural practices adopted. Transport of heavy metals in soil mainly occurs in forms dissolved in the soil solution or associated with solid particles, water being their main means of transport. In this context, the aim of this study was to evaluate the heavy metal and micronutrient content in the soil and in the grapevine plant and fruit under different irrigation strategies. The experiment was carried out in Petrolina, PE, Brazil. The treatments consisted of three irrigation strategies: full irrigation (FI, regulated deficit irrigation (RDI, and deficit irrigation (DI. During the period of grape maturation, soil samples were collected at the depths of 0-10, 10-20, 20-40, 40-60, and 60-80 cm. In addition, leaves were collected at the time of ripening of the bunches, and berries were collected at harvest. Thus, the heavy metal and micronutrient contents were determined in the soil, leaves, and berries. The heavy metal and micronutrient contents in the soil showed a stochastic pattern in relation to the different irrigation strategies. The different irrigation strategies did not affect the heavy metal and micronutrient contents in the vine leaves, and they were below the contents considered toxic to the plant. In contrast, the greater availability of water in the FI treatment favored a greater Cu content in the grape, which may be a risk to vines, causing instability and turbidity. Thus, adoption of deficit irrigation is recommended so as to avoid compromising the stability of tropical wines of the Brazilian Northeast.

Smart Water Conservation System for Irrigated Landscape. ESTCP Cost and Performance Report

Science.gov (United States)

2016-10-01

irrigation practices (timer based and manual watering systems) that are no longer sustainable given the limited water supplies in many U.S. locations and...Areas that have high local water costs or limited water supply options may also benefit from water harvesting. The implementation of smart ET...in potable water use. Smart ET controllers with centralized and site-specific sensor inputs, such as ET gauge, rain, soil moisture, and leak

Identification of top-down forces regulating cotton aphid population growth in transgenic Bt cotton in central China.

Directory of Open Access Journals (Sweden)

Peng Han

Full Text Available The cotton aphid Aphis gossypii Glover is the main aphid pest in cotton fields in the Yangtze River Valley Cotton-planting Zone (YRZ in central China. Various natural enemies may attack the cotton aphid in Bt cotton fields but no studies have identified potential specific top-down forces that could help manage this pest in the YRZ in China. In order to identify possibilities for managing the cotton aphid, we monitored cotton aphid population dynamics and identified the effect of natural enemies on cotton aphid population growth using various exclusion cages in transgenic Cry1Ac (Bt+CpTI (Cowpea trypsin inhibitor cotton field in 2011. The aphid population growth in the open field (control was significantly lower than those protected or restricted from exposure to natural enemies in the various exclusion cage types tested. The ladybird predator Propylaea japonica Thunberg represented 65% of Coccinellidae predators, and other predators consisted mainly of syrphids (2.1% and spiders (1.5%. The aphid parasitoids Aphidiines represented 76.7% of the total count of the natural enemy guild (mainly Lysiphlebia japonica Ashmead and Binodoxys indicus Subba Rao & Sharma. Our results showed that P. japonica can effectively delay the establishment and subsequent population growth of aphids during the cotton growing season. Aphidiines could also reduce aphid density although their impact may be shadowed by the presence of coccinellids in the open field (likely both owing to resource competition and intraguild predation. The implications of these results are discussed in a framework of the compatibility of transgenic crops and top-down forces exerted by natural enemy guild.

The "Cotton Problem"

OpenAIRE

Baffes, John

2005-01-01

Cotton is an important cash crop in many developing economies, supporting the livelihoods of millions of poor households. In some countries it contributes as much as 40 percent of merchandise exports and more than 5 percent of gross domestic product (GDP). The global cotton market, however, has been subject to numerous policy interventions, to the detriment of nonsubsidized producers. This ...

Tensile Properties of Single Jersey and 1×1 Rib Knitted Fabrics Made from 100% Cotton and Cotton/Lycra Yarns

Directory of Open Access Journals (Sweden)

Dereje Berihun Sitotaw

2017-01-01

Full Text Available The tensile properties such as tensile strength which is measured as breaking force in Newton (N and elongation percent (% at break of single jersey and 1×1 rib (knitted with full needles knitted fabrics made from 100% cotton and cotton/Lycra yarns (5% Lycra yarn content in 95% combed cotton yarn are investigated in this research. The sample fabrics are conditioned for 24 hours at 20±1°C temperature and 65±2% relative humidity before testing. Ten specimens (five for lengthwise and five for widthwise have been taken from each of the two knitted structures, those made from 100% cotton and cotton/Lycra (at 95/5 percent ratio blend yarns. According to the discussion and as found from the investigations, the tensile properties of single jersey and 1×1 rib knitted fabrics made from 100% cotton and cotton/Lycra yarns are significantly different from each other and both of the knitted fabrics have high elongation percent at break with cotton/Lycra blend yarns as compared to 100% cotton yarn. Knitted fabrics made from cotton/Lycra blended yarn have low breaking force and high elongation percent at break relative to knitted fabrics made from 100% cotton yarns.

Soil salinity assessment through satellite thermography for different irrigated and rainfed crops

Science.gov (United States)

Ivushkin, Konstantin; Bartholomeus, Harm; Bregt, Arnold K.; Pulatov, Alim; Bui, Elisabeth N.; Wilford, John

2018-06-01

The use of canopy thermography is an innovative approach for salinity stress detection in plants. But its applicability for landscape scale studies using satellite sensors is still not well investigated. The aim of this research is to test the satellite thermography soil salinity assessment approach on a study area with different crops, grown both in irrigated and rainfed conditions, to evaluate whether the approach has general applicability. Four study areas in four different states of Australia were selected to give broad representation of different crops cultivated under irrigated and rainfed conditions. The soil salinity map was prepared by the staff of Geoscience Australia and CSIRO Land and Water and it is based on thorough soil sampling together with environmental modelling. Remote sensing data was captured by the Landsat 5 TM satellite. In the analysis we used vegetation indices and brightness temperature as an indicator for canopy temperature. Applying analysis of variance and time series we have investigated the applicability of satellite remote sensing of canopy temperature as an approach of soil salinity assessment for different crops grown under irrigated and rainfed conditions. We concluded that in all cases average canopy temperatures were significantly correlated with soil salinity of the area. This relation is valid for all investigated crops, grown both irrigated and rainfed. Nevertheless, crop type does influence the strength of the relations. In our case cotton shows only minor temperature difference compared to other vegetation classes. The strongest relations between canopy temperature and soil salinity were observed at the moment of a maximum green biomass of the crops which is thus considered to be the best time for application of the approach.

Evaluating two irrigation controllers under subsurface drip irrigated tomato crop

International Nuclear Information System (INIS)

Al-Ghobari, H.M.; Mohammad, F.S.; El Marazky, M.S.A.

2016-01-01

Smart systems could be used to improve irrigation scheduling and save water under Saudi Arabia’s present water crisis scenario. This study investigated two types of evapotranspiration-based smart irrigation controllers, SmartLine and Hunter Pro-C2, as promising tools for scheduling irrigation and quantifying plants’ water requirements to achieve water savings. The effectiveness of these technologies in reducing the amount of irrigation water was compared with the conventional irrigation scheduling method as a control treatment. The two smart irrigation sensors were used for subsurface irrigation of a tomato crop (cv. Nema) in an arid region. The results showed that the smart controllers significantly reduced the amount of applied water and increased the crop yield. In general, the Hunter Pro-C2 system saved the highest amount of water and produced the highest crop yield, resulting in the highest water irrigation efficiency compared with the SmartLine controller and the traditional irrigation schedule. It can be concluded that the application of advanced scheduling irrigation techniques such as the Hunter controller under arid conditions can realise economic benefits by saving large amounts of irrigation water.

Evaluating two irrigation controllers under subsurface drip irrigated tomato crop

Energy Technology Data Exchange (ETDEWEB)

Al-Ghobari, H.M.; Mohammad, F.S.; El Marazky, M.S.A.

2016-07-01

Smart systems could be used to improve irrigation scheduling and save water under Saudi Arabia’s present water crisis scenario. This study investigated two types of evapotranspiration-based smart irrigation controllers, SmartLine and Hunter Pro-C2, as promising tools for scheduling irrigation and quantifying plants’ water requirements to achieve water savings. The effectiveness of these technologies in reducing the amount of irrigation water was compared with the conventional irrigation scheduling method as a control treatment. The two smart irrigation sensors were used for subsurface irrigation of a tomato crop (cv. Nema) in an arid region. The results showed that the smart controllers significantly reduced the amount of applied water and increased the crop yield. In general, the Hunter Pro-C2 system saved the highest amount of water and produced the highest crop yield, resulting in the highest water irrigation efficiency compared with the SmartLine controller and the traditional irrigation schedule. It can be concluded that the application of advanced scheduling irrigation techniques such as the Hunter controller under arid conditions can realise economic benefits by saving large amounts of irrigation water.

The Effect of Different Levels of Irrigation and Nitrogen Fertilizer on Yield and Water Use Efficiency of Potato in Subsurface Drip Irrigation

Directory of Open Access Journals (Sweden)

Mohammad Jolaini

2017-06-01

applied in 5 times until flowering stage. Potassium, phosphorus and microelements applied according to the soil analysis results. The subsurface drip tape was used for irrigation. Tapes with 300 µm thickness, 30 cm dripper spacing and 4 lit/hour discharge were applied. Tapes buried at 20 cm soil depth before planting. Water amount was measured by the volume meter at each irrigation treatment. Water amount calculated based on crop water requirement and plot area and irrigation frequency. On maturity stage, 8 m of two central rows of each plot harvested for determining tuber yields. Water use efficiency was calculated as the ratio of the tuber yield to the total consumed water volume. Statistical analysis was performed using MSTAT-C software. Means were compared by Duncan's multiple range tests at 0.05 and 0.01 significant levels. Results Discussion: Results of combined analysis showed that yield and water use efficiency (WUE did not affected by irrigation frequency. Yield and water use efficiency affected by nitrogen level (p

Wind erosion potential influenced by tillage in an irrigated potato-sweet corn rotation in the Columbia Basin

Science.gov (United States)

Wind erosion is a concern within the Columbia Basin of the Inland Pacific Northwest (PNW) United States due to the sandy texture of soils and small amount of residue retained on the soil surface after harvest of vegetable crops like potato. This study assessed potential wind erosion of an irrigated ...

Reintroduction of Sphagnum into harvested peatlands: evaluation of various methods for protection against dessication

Energy Technology Data Exchange (ETDEWEB)

Rochefort, L.; Bastien, D.F. [Laval University, Sainte-Foy, PQ (Canada). Dept. of Phytology

1998-09-01

In order to restore peatlands after peat harvesting operations, Sphagnum diaspores were introduced in combination with 1) physical protection devices or 2) an irrigating system. The response of five Sphagnum species was investigated in relation to two types of peat substrates for two growing seasons. The physical protections consisting of plastic shade cloth (40% and 60% shade) improved the development of a greater number of capitula compared with control surfaces without protection or surfaces covered with a perforated polyethylene sheet. This stimulating effect could be caused by higher humidity created by a shale screen. Irrigation also enhanced the establishment success of Sphagnum but the effect was less successful than expected.

Soil salinity under deficit drip irrigation of potato and millet in in an arid environment

Directory of Open Access Journals (Sweden)

Kamel Nagaz

2017-06-01

Full Text Available The influence of deficit irrigation (DI with saline water on soil salinity in a drip-irrigated potato and millet fields was investigated. We had compared proportional soil salinity developed under Full and DI under drip irrigation. For both experiments, the treatments were (1 Full, control treatment where rooting zone soil water content was increased to field capacity at each irrigation; (2 DI80; (3 DI60 and DI40; 20, 40 and 60% deficit irrigation compared to Full treatment were applied, respectively. Soil salinity was assessed using the isosalinity maps constructed with grid soil sampling of plant root zone at harvest. Results show that high spatial variability was observed in salinity along soil profiles when applying saline water with drip irrigation for potato. For the DI40 and DI60 treatments, high soil salinity was recorded in the upper soil layer close to the emitter. Increase of soil salinity within soil depths of 30 cm or below was also observed under DI60 and DI40 treatments. The lowest increase was noted under the full treatment. Surface soil salinity was somewhat higher under DI60 and DI40 compared with that of full and DI80 irrigation treatments. The distribution of salts around the dripper changes during the crop season according to applied irrigation treatments, with overall higher concentrations between the drippers and towards the margin of wetted band. Iso-salinity maps at harvest of potato showed that the surface layer of 30 cm depth had the lowest salinity which gradually increased at deeper zones irrespective of the treatment. Salt accumulation essentially occurred at wetting front between the drippers and the plant row. Although salt accumulation was relatively highest along the row under DI treatments, the area of accumulation was relatively shifted toward the center between the rows and the drip line. The results also show the importance of the potato cropping season to benefit from the leaching of soluble salts with the

Induced mutation of new cotton lines tolerant to verticillium wilt with improved characters

International Nuclear Information System (INIS)

Rastegary, G.; Hoseiny Neghad, Z.

1998-01-01

Induction of mutation for genetic variation has been used in crop improvement for many years. The mutant lines can be used either directly or as a new genetic source in cross breeding. In cotton 'eleven' and 'two' mutant varieties as new genetic sources have been evolved directly and indirectly, respectively. One of the major obstacles in cotton production in northern region of Iran, Gorgan and Gonbad (where they are known as the main cultivation area of this crop), is the presence of verticillium wilt fungal disease. Since this fungus is soil-born, and can not be controlled chemically, the most efficient way of combating against the disease is to breed for the tolerance/resistance of the species. For this purpose, a mutation breeding technique was applied using gamma radiation as mutagen. The seeds of four varieties (Shirpan, Tashkand, Bakhtegan, and Sahel) were irradiated after reaching a proper absorbed humidity. The radiation doses of 150 to 350 Gy were applied and the seeds were cultivated in two different locations (Varamin and Kordkuy) as M1 generation. The cotton balls of each individual healthy plant was harvested to attain the seeds of M2 rows. In M2, the plants with different degrees of tolerance to the disease were compared to the selected parents (taking into consideration that the soil was contaminated). The good yielding lines with different level of tolerance were taken up to the 5th generation, yielding 70 lines of superior qualitative and quantitative traits. (author)

A comparison of E. coli persistence on basil plants and soil using drip and overhead irrigation

Science.gov (United States)

Introduction: It is estimated that each year in the US there are 63,153 cases of foodborne illnesses caused by E.coli O157 serotypes and 112,752 illnesses caused by non-O157 shiga-toxin producing E.coli. Irrigation water is recognized as a pre-harvest contamination source and has been linked with o...

The water footprint of cotton consumption

NARCIS (Netherlands)

Chapagain, Ashok; Hoekstra, Arjen Ysbert; Savenije, H.H.G.; Gautam, R.

2005-01-01

The consumption of a cotton product is connected to a chain of impacts on the water resources in the countries where cotton is grown and processed. The aim of this report is to assess the ‘water footprint’ of worldwide cotton consumption, identifying both the location and the character of the

Declining groundwater level caused by irrigation to row crops in the Lower Mississippi River Basin, Current Situation and Trends

Science.gov (United States)

Feng, G.; Gao, F.; Ouyang, Y.

2017-12-01

The Mississippi River is North America's largest river and the second largest watershed in the world. It flows over 3,700 km through America's heartland to the Gulf of Mexico. Over 3 million hectares in the Lower Mississippi River Basin represent irrigated cropland and 90 percent of those lands currently rely on the groundwater supply. The primary crops grown in this region are soybean, corn, cotton, and rice. Increased water withdrawals for irrigating those crops and stagnant recharging jeopardize the long-term availability of the aquifer and place irrigation agriculture in the region on an unsustainable path. The objectives of this study were to: 1) analyze the current groundwater level in the Lower Mississippi River Basin based on the water table depth observed by Yazoo Mississippi Delta Joint Water Management District from 2000 and 2016; 2) determine trends of change in groundwater level under conventional and groundwater saving irrigation management practices (ET or soil moisture based full irrigation scheduling using all groundwater or different percentages of ground and surface water). The coupled SWAT and MODFLOW model was applied to investigate the trends. Observed results showed that the groundwater level has declined from 33 to 26 m at an annual decrease rate of 0.4 m in the past 17 years. Simulated results revealed that the groundwater storage was decreased by 26 cm/month due to irrigation in crop season. It is promising that the groundwater storage was increased by 23 cm/month, sometimes even 60 cm/month in crop off-growing season because of recharge from rainfall. Our results suggest that alternative ET or soil moisture based groundwater saving irrigation scheduling with conjunctive use of surface water is a sustainable practice for irrigated agriculture in in the Lower Mississippi River Basin.

Response of successive three generations of cotton bollworm, Helicoverpa armigera (Hübner), fed on cotton bolls, under elevated CO2

Institute of Scientific and Technical Information of China (English)

无

2007-01-01

The growth, development and consumption of successive three generations of cotton bollworm, Helicoverpa armigera (Hübner), fed on cotton bolls grown under elevated CO2 (double-ambient vs. ambient) in open-top chambers were examined. Significant decreases in protein, total amino acid, water and nitrogen content and increases in free fatty acid were observed in cotton bolls. Changes in quality of cotton bolls affected the growth, development and food utilization of H. armigera. Significantly longer larval development duration in three successive generations and lower pupal weight of the second and third generations were observed in cotton bollworm fed on cotton bolls grown under elevated CO2. Significantly lower fecundity was also found in successive three generations of H. armigera fed on cotton bolls grown under elevated CO2. The consumption per larva occurred significant increase in successive three generations and frass per larva were also significantly increased during the second and third generations under elevated CO2. Significantly lower relative growth rate, efficiency of conversion of ingested food and significant higher relative consumption rate in successive three generations were observed in cotton bollworm fed on cotton bolls grown under elevated CO2. Significantly lower potential female fecundity, larval numbers and population consumption were found in the second and third generations of cotton bollworm fed on cotton bolls grown under elevated CO2. The integrative effect of higher larval mortality rate and lower adult fecundity resulted in significant decreases in potential population consumption in the latter two generations. The results show that elevated CO2 adversely affects cotton bolls quality, which indicates the potential population dynamics and potential population consumption of cotton bollworm will alleviate the harm to the plants in the future rising CO2 atmosphere.

Statistical Analysis Of Heavy Metals Concentration In Watermelon Plants Irrigated By Wastewater

Science.gov (United States)

Khanjani, M. J.; Maghsoudi moud, A. A.; Saffari, V. R.; Hashamipor, S. M.; Soltanizadeh, M.

2008-01-01

Concentration of heavy metals in vegetables irrigated by urban wastewater is a cause of serious concern due to the potentials health problems of consuming contaminated produce. In this study it is tried to model the concentration of heavy metals (Cd, Cr, Cu, Fe,…) as a function of their concentration in watermelon roots and stems. Our study shows there is a good relationship between them for most of collected data. By measuring the concentration in root and stem of watermelon plant samples before harvesting, the concentration of heavy metal in watermelon's fruit can be estimated by presented mathematical models. This study shows the concentrations of heavy metals in fruits, roots and stems of watermelon plants are very high and in dangerous level when irrigated by municipal waste water.

The impact of sewage irrigation on the uptake of mercury in corn plants (Zea mays) from suburban Beijing

International Nuclear Information System (INIS)

Rothenberg, S.E.; Du, X.; Zhu, Y.-G.; Jay, J.A.

2007-01-01

The impact of sewage irrigation on the uptake and translocation of mercury (Hg) in corn plants (Zea mays) was investigated. Corn plants were harvested the same day from two nearby fields in suburban Beijing, one irrigated historically with sewage effluent, and one irrigated solely with groundwater. Hg content was analyzed in the soil, roots and stems, while percent moisture and soil organic content were analyzed in the soil samples. The concentration of Hg in the soil and roots, and the soil organic content were not significantly different between the two fields, despite the historic practice of sewage irrigation. Hg content in roots was positively correlated with soil Hg concentration (r = 0.95, n = 6). The transfer coefficients between roots and stems were significantly higher in the control site (control: 2.06, sewage-irrigated: 0.44, p < 0.05), indicating that the barrier effect of the roots was not consistent between the two fields. - Hg content in the roots of corn plants (Zea mays) was positively correlated with soil Hg content, but negatively correlated with Hg content in stems

The impact of sewage irrigation on the uptake of mercury in corn plants (Zea mays) from suburban Beijing

Energy Technology Data Exchange (ETDEWEB)

Rothenberg, S.E. [Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, 18 Shuangqing Road, Beijing, 100085 (China); Environmental Science and Engineering Program, Box 951772 CHS, University of California, Los Angeles, CA 90095-1772 (United States)], E-mail: srothenb@ucla.edu; Du, X.; Zhu, Y.-G. [Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, 18 Shuangqing Road, Beijing, 100085 (China); Jay, J.A. [Department of Civil and Environmental Engineering, Box 951593 Boelter Hall, University of California, Los Angeles, CA 90095-1593 (United States)

2007-09-15

The impact of sewage irrigation on the uptake and translocation of mercury (Hg) in corn plants (Zea mays) was investigated. Corn plants were harvested the same day from two nearby fields in suburban Beijing, one irrigated historically with sewage effluent, and one irrigated solely with groundwater. Hg content was analyzed in the soil, roots and stems, while percent moisture and soil organic content were analyzed in the soil samples. The concentration of Hg in the soil and roots, and the soil organic content were not significantly different between the two fields, despite the historic practice of sewage irrigation. Hg content in roots was positively correlated with soil Hg concentration (r = 0.95, n = 6). The transfer coefficients between roots and stems were significantly higher in the control site (control: 2.06, sewage-irrigated: 0.44, p < 0.05), indicating that the barrier effect of the roots was not consistent between the two fields. - Hg content in the roots of corn plants (Zea mays) was positively correlated with soil Hg content, but negatively correlated with Hg content in stems.

Evaluation of cotton stalks destroyers

OpenAIRE

Bianchini, Aloisio; Borges, Pedro H. de M.

2013-01-01

The destruction of the cotton crop residues (cotton stalks) is a mandatory procedure in Brazil for prophylactic issues, but is a subject unexplored by the research and there are few studies that deal with this issue. However, this is not encouraged in recent decades, studies aimed at developing and evaluating equipment for this purpose. The present study had the objective to evaluate six methods for mechanical destruction of cotton crop residues. Each method was defined based on the principle...

Optimization of planting pattern plan in Logung irrigation area using linear program

Science.gov (United States)

Wardoyo, Wasis; Setyono

2018-03-01

Logung irrigation area is located in Kudus Regency, Central Java Province, Indonesia. Irrigation area with 2810 Ha of extent is getting water supply from Logung dam. Yet, the utilization of water at Logung dam is not optimal and the distribution of water is still not evenly distributed. Therefore, this study will discuss about the optimization of irrigation water utilization based on the beginning of plant season. This optimization begins with the analysis of hydrology, climatology and river discharge in order to determine the irrigation water needs. After determining irrigation water needs, six alternatives of planting patterns with the different early planting periods, i.e. 1st November, 2nd November, 3rd November, 1st December, 2nd December, and 3rd December with the planting pattern of rice-secondary crop-sugarcane is introduced. It is continued by the analysis of water distribution conducted using linear program assisted by POM-Quantity method for Windows 3 with the reliable discharge limit and the available land area. Output of this calculation are to determine the land area that can be planted based on the type of plant and growing season, and to obtaine the profits of harvest yields. Based on the optimum area of each plant species with 6 alternatives, the most optimum area was obtained at the early planting periods on 3rd December with the production profit of Rp 113.397.338.854,- with the planting pattern of rice / beans / sugarcane-rice / beans / sugarcane-beans / sugarcane.

Cotton : Market setting, trade policies, and issues

OpenAIRE

Baffes, John

2004-01-01

The value of world cotton production in 2000-01 has been estimated at about $20 billion, down from $35 billion in 1996-97 when cotton prices were 50 percent higher. Although cotton's share in world merchandise trade is insignificant (about 0.12 percent), it is very important to a number of developing countries. Cotton accounts for approximately 40 percent of total merchandise export earnin...

Irrigation effects on soil attributes and grapevine performance in a 'Godello' vineyard of NW Spain

Science.gov (United States)

Fandiño, María; Trigo-Córdoba, Emiliano; Martínez, Emma M.; Bouzas-Cid, Yolanda; Rey, Benjamín J.; Cancela, Javier J.; Mirás-Avalos, Jose M.

2014-05-01

Irrigation systems are increasingly being used in Galician vineyards. However, a lack of information about irrigation management can cause a bad use of these systems and, consequently, reductions in berry quality and loss of water resources. In this context, experiences with Galician cultivars may provide useful information. A field experiment was carried out over two seasons (2012-2013) on Vitis vinifera (L.) cv. 'Godello' in order to assess the effects of irrigation on soil attributes, grapevine performance and berry composition. The field site was a commercial vineyard located in A Rúa (Ourense-NW Spain). Rain-fed vines (R) were compared with two irrigation systems: surface drip irrigation (DI) and subsurface drip irrigation (SDI). Physical and chemical characteristics of soil were analyzed after installing irrigation systems at the beginning of each season, in order to assess the effects that irrigation might have on soil attributes. Soil water content, leaf and stem water potentials and stomatal conductance were periodically measured over the two seasons. Yield components including number of clusters, yield per plant and cluster average weight were taken. Soluble solids, pH, total acidity and amino acids contents were measured on the grapes at harvest. Pruning weight was also recorded. Soil attributes did not significantly vary due to the irrigation treatments. Stem water potentials were significantly lower for R plants on certain dates through the season, whereas stomatal conductance was similar for the three treatments in 2013, while in 2012 SDI plants showed greater stomatal conductance values. SDI plants yielded more than those R due to both a greater number of clusters per plant and to heavier clusters. Pruning weight was significantly higher in SI plants. Berry composition was similar for the three treatments except for the amino acids content, which was higher under SDI conditions. These results may be helpful for a sustainable management of irrigation

Cotton leaf curl Burewala virus with intact or mutant transcriptional activator proteins: complexity of cotton leaf curl disease.

Science.gov (United States)

Kumar, Jitendra; Gunapati, Samatha; Alok, Anshu; Lalit, Adarsh; Gadre, Rekha; Sharma, Naresh C; Roy, Joy K; Singh, Sudhir P

2015-05-01

Cotton leaf curl disease (CLCuD) is a serious disease of cotton on the Indian subcontinent. In the present study, three cotton leaf curl viruses, cotton leaf curl Burewala virus (CLCuBuV), cotton leaf curl Kokhran virus (CLCuKoV) and cotton leaf curl Multan virus (CLCuMV), and their associated satellites, cotton leaf curl Multan betasatellite (CLCuMB) and cotton leaf curl Multan alphasatellite (CLCuMA), were detected. CLCuBuV with either intact (CLCuBuV-1) or mutant (CLCuBuV-2) transcriptional activator protein (TrAP) were detected in different plants. Agroinoculation with CLCuBuV-1 or CLCuBuV-2 together with CLCuMB and CLCuMA, resulted in typical leaf curling and stunting of tobacco plants. Inoculation with CLCuKoV or an isolate of CLCuMV (CLCuMV-2), together with CLCuMB and CLCuMA, induced severe leaf curling, while the other isolate of CLCuMV (CLCuMV-1), which was recombinant in origin, showed mild leaf curling in tobacco. To investigate the effect of intact or mutant TrAP and also the recombination events, CLCuBuV-1, CLCuBuV-2, CLCuMV-1 or CLCuMV-2 together with the satellites (CLCuMA and CLCuMB) were transferred to cotton via whitefly-mediated transmission. Cotton plants containing CLCuBuV-1, CLCuBuV-2 or CLCuMV-2 together with satellites showed curling and stunting, whereas the plants having CLCuMV-1 and the satellites showed only mild and indistinguishable symptoms. CLCuBuV-1 (intact TrAP) showed severe symptoms in comparison to CLCuBuV-2 (mutant TrAP). The present study reveals that two types of CLCuBuV, one with an intact TrAP and the other with a mutant TrAP, exist in natural infection of cotton in India. Additionally, CLCuMuV-1, which has a recombinant origin, induces mild symptoms in comparison to the other CLCuMV isolates.

Processing and properties of PCL/cotton linter compounds

Energy Technology Data Exchange (ETDEWEB)

Bezerra, Elieber Barros; Franca, Danyelle Campos; Morais, Dayanne Diniz de Souza; Araujo, Edcleide Maria [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Departamento de Engenharia de Materiais; Rosa, Morsyleide de Freitas; Morais, Joao Paulo Saraiva [Embrapa Tropical Agroindustia, Fortaleza, CE (Brazil); Wellen, Renate Maria Ramos, E-mail: wellen.renate@gmail.com [Universidade Federal da Paraiaba (UFPB), Joao Pessoa, PB (Brazil)

2017-03-15

Biodegradable compounds of poly(ε-caprolactone) (PCL)/ cotton linter were melting mixed with filling content ranging from 1% to 5% w/w. Cotton linter is an important byproduct of textile industry; in this work it was used in raw state and after acid hydrolysis. According to the results of torque rheometry no decaying of viscosity took place during compounding, evidencing absence of breaking down in molecular weight. The thermal stability increased by 20% as observed in HDT for PCL/cotton nanolinter compounds. Adding cotton linter to PCL did not change its crystalline character as showed by XRD; however an increase in degree of crystallinity was observed by means of DSC. From mechanical tests in tension was observed an increase in ductility of PCL, and from mechanical tests in flexion an increase in elastic modulus upon addition of cotton linter, whereas impact strength presented lower values for PCL/cotton linter and PCL/cotton nanolinter compounds. SEM images showed that PCL presents plastic fracture and cotton linter has an interlacing fibril structure with high L/D ratio, which are in agreement with matrix/fibril morphology observed for PCL/cotton linter compounds. PCL/cotton linter compounds made in this work cost less than neat PCL matrix and presented improved properties making feasible its commercial use. (author)

Optimal model-based deficit irrigation scheduling using AquaCrop: a simulation study with cotton, potato and tomato

DEFF Research Database (Denmark)

Linker, Raphael; Ioslovich, Ilya; Sylaios, Georgios

2016-01-01

-smooth behavior of the objective function and the fact that it involves multiple integer variables. We developed an optimization scheme for generating sub-optimal irrigation schedules that take implicitly into account the response of the crop to water stress, and used these as initial guesses for a full......Water shortage is the main limiting factor for agricultural productivity in many countries and improving water use efficiency in agriculture has been the focus of numerous studies. The usual approach to limit water consumption in agriculture is to apply water quotas and in such a situation farmers...... variables are the irrigation amounts for each day of the season. The objective function is the expected yield calculated with the use of a model. In the present work we solved this optimization problem for three crops modeled by the model AquaCrop. This optimization problem is non-trivial due to the non...

Biological control of cotton aphid (Aphis gossypii Glover) in cotton (inter)cropping systems in China : a simulation study

NARCIS (Netherlands)

Xia, J.

1997-01-01

Cotton aphid ( Aphis gossypii Glover) is the key insect pest of seedling cotton ( Gossypium hirsutum L. ) in China, particularly in the North China cotton region. The resulting annual losses amount to 10-15% of the attainable yield. Sole reliance on

Evaluation of fog and rain water collected at Delta Barrage, Egypt as a new resource for irrigated agriculture

Science.gov (United States)

Salem, Talaat A.; Omar, Mohie El Din M.; El Gammal, H. A. A.

2017-11-01

Alternative clean water resources are needed in Egypt to face the current water shortage and water quality deterioration. Therefore, this research investigates the suitability of harvesting fog and rain water for irrigation using a pilot fog collector for water quantity, water quality, and economic aspects. A pilot fog collector was installed at one location at Delta Barrage, Egypt. Freeze liquid nitrogen was fixed at the back of the fiberglass sheet to increase the condensation rate. The experiment was conducted during the period from November 2015 to February 2016. In general, all physicochemical variables are observed with higher values in the majority of fog than rain water. The fog is assumed to contain higher concentrations of anthropogenic emissions. TDS in both waters collected are less than 700 mg/l at sodium content less than 60%, classifying these waters as good for various plants under most conditions. In addition, SAR calculated values are less than 3.0 in each of fog and rain water, which proves the water suitability for all irrigated agriculture. Al and Fe concentrations were found common in all samples with values less than the permissible limits of the guidelines. These metals originate from soil material, ash and metal surfaces. The sensitive heavy metals (Cd and Pb) were within the permissible limits of the guideline in fog water, indicating this water is suitable for irrigation. On the contrary, rain water that has heavy metals is not permitted in irrigation water as per the Egyptian law. As per WQI, the rain water is classified as good quality while fog is classified as medium quality. Regarding the water quantity, a significant increase in the harvested fog quantity was observed after cooling the collector surface with freeze liquid nitrogen. The current fog collector produced the lowest water quantity among different fog collectors worldwide. However, these comparative results confirmed that quantity is different from one location to another

Willingness to pay for more efficient irrigation techniques in the Lake Karla basin, Greece.

Science.gov (United States)

Mylopoulos, Nikitas; Fafoutis, Chrysostomos

2014-05-01

Thessaly, the second largest plain of Greece, is an intensively cultivated agricultural region. The intense and widespread agriculture of hydrophilic crops, such as cotton, has led to a remarkable water demand increase, which is usually covered by the overexploitation of groundwater resources. The Lake Karla basin is a prominent example of this unsustainable practice. Competition for the limited available freshwater resources in the Lake Karla basin is expected to increase in the near future as demand for irrigation water increases and drought years are expected to increase due to climate change. Together with the Unions of Agricultural Cooperatives, the Local Organizations of Land Reclamation is planning to introduce more efficient, water saving automated drip irrigation in the area among farmers who currently use non-automated drip irrigation, in order to ensure that these farmers can better cope with drought years and that water will be used more efficiently in crop production. Saving water use in irrigated agriculture is expected to be beneficial to both farmers and the restoration of Lake Karla and its wildlife like plants and birds. The aim of this study is to understand and record the farmers' opinions regarding the use of irrigation water and the restoration of Lake Karla, and to extract valuable conclusions and perform detailed analysis of the criteria for a new irrigation method. A general choice experiment with face-to-face interviews was conducted, using a random sample of 150 open field farmers from the study area. The farmers, who use the non-automated drip irrigation method and their farms are located within the watershed of Lake Karla, were interviewed regarding their willingness to switch to more efficient irrigation techniques, such as automated and controlled drip irrigation.The most important benefits of automated drip irrigation are an increase in crop yield, as plants are given water in a more precise way (based on their needs during the

Engineered disease resistance in cotton using RNA-interference to knock down cotton leaf curl kokhran virus-Burewala and cotton leaf curl Multan betasatellite

Science.gov (United States)

Cotton Leaf Curl virus Disease (CLCuD) has caused enormous losses in cotton (Gossypium hirsutum) production in Pakistan. RNA interference (RNAi) is an emerging technique that could knock out CLCuD by targeting different regions of the pathogen genome that are important for replication, transcription...

Development and validation of SUCROS-Cotton : A potential crop growth simulation model for cotton

NARCIS (Netherlands)

Zhang, L.; Werf, van der W.; Cao, W.; Li, B.; Pan, X.; Spiertz, J.H.J.

2008-01-01

A model for the development, growth and potential production of cotton (SUCROS-Cotton) was developed. Particular attention was given to the phenological development of the plant and the plasticity of fruit growth in response to temperature, radiation, daylength, variety traits, and management. The

Diversity of arthropod community in transgenic poplar-cotton ecosystems.

Science.gov (United States)

Zhang, D J; Lu, Z Y; Liu, J X; Li, C L; Yang, M S

2015-12-02

Poplar-cotton agro-ecosystems are the main agricultural planting modes of plain cotton fields in China. Here, we performed a systematic survey of the diversity and population of arthropod communities in four different combination of poplar-cotton eco-systems, including I) non-transgenic poplar and non-transgenic cotton fields; II) non-transgenic poplar and transgenic cotton fields [Bacillus thuringiensis (Bt) cotton]; III) Bt transgenic poplar (high insect resistant strain Pb29) and non-transgenic cotton; and IV) transgenic poplar and transgenic cotton fields, over a period of 3 years. Based on the statistical methods used to investigate community ecology, the effects of transgenic ecosystems on the whole structure of the arthropod community, on the structure of arthropods in the nutritive layer, and on the similarity of arthropod communities were evaluated. The main results were as follows: the transgenic poplar-cotton ecosystem has a stronger inhibitory effect on insect pests and has no impact on the structure of the arthropod community, and therefore, maintains the diversity of the arthropod community. The character index of the community indicated that the structure of the arthropod community of the transgenic poplar-cotton ecosystem was better than that of the poplar-cotton ecosystem, and that system IV had the best structure. As for the abundance of nutritional classes, the transgenic poplar-cotton ecosystem was also better than that of the non-transgenic poplar-cotton ecosystem. The cluster analysis and similarity of arthropod communities between the four different transgenic poplar-cotton ecosystems illustrated that the structure of the arthropod community excelled in the small sample of the transgenic poplar-cotton ecosystems.

Cotton trends in India

Indian Academy of Sciences (India)

First page Back Continue Last page Graphics. Cotton trends in India. A crop of significant economic importance, valued at over Rs. 15000 Crs. Provides income to 60 million people. Crucial raw material for Rs 83000 Crores textile industry out of which Rs 45754 crores is exports. Approx. 20 Million acres of cotton provides ...

Ergonomic Evaluation of Battery Powered Portable Cotton Picker

Science.gov (United States)

Dixit, A.; Manes, G. S.; Singh, A.; Prakash, A.; Mahal, J. S.

2012-09-01

Ergonomic evaluation of battery powered portable manual cotton picker was carried out on two subjects for three cotton varieties and was compared against manual method of picking. It is a hand operated machine and has a pair of chain with small sharp edged teeth and sprockets and is operated by a light weight 12 V battery. Cotton gets entangled with the chain and is collected and guided into the collection bag. Average heart rate, oxygen consumption, workload, energy expenditure was more in case of cotton picking by manual cotton picker as compared to manual picking for both the subjects for all three cotton variety types. Oxygen consumption varied from 0.81 to 0.97 l/min, workload varied from 36.32 to 46.16 W and energy expenditure varied from 16.83 to 20.33 kJ/min for both the subject in case of machine picking for all three cotton varieties. The maximum discomfort experienced by the subjects during picking cotton by manual cotton picker was in right wrist palm, right forearm, upper and lower back, left shoulder and in lower legs and both feet.

Effect of different levels of nitrogen fertilizer on yield and quality of sugar beet Beta vulgaris irrigated with saline groundwater (fertigation and surface irrigation) and grown under saline conditions

International Nuclear Information System (INIS)

Janat, M.

2009-07-01

In a field experiment Sugar beet Beta vulgaris was grown as a spring crop during the growing seasons of 2004 and 2006, in salt affected soil, previously planted with sesbania and barley (2005 and 2003) to evaluate the response of sugar beet to two irrigation methods, (drip fertigation and surface irrigation), different levels of nitrogen fertilizer and its effect on yield and quality. Different rates of nitrogen fertilizers (0, 50, 100, 150 and 200 kg N/ ha) as urea (46% N) were injected for drip irrigation or broadcasted for the surface-irrigated treatments in four equally split applications. The 15 N labelled urea was applied to sub-plots of 1.0 m 2 in each experimental unit in a manner similar to that of unlabeled urea. Irrigation scheduling was carried out using the direct method of neutron scattering technique. Sugar beet was irrigated when soil moisture in the upper 25 cm was 80% of the field capacity (FC) and such practice continued until the six leaf stage. From the latter stage until harvest, sugar beet was irrigated when soil moisture in the upper 50 cm reached 80% of the FC. The amount of irrigation water applied, electrical conductivity of the soil paste, dry matter and fresh roots yield, total nitrogen uptake and N derived from fertilizer were also determined. Furthermore, Nitrogen use as well as water use-efficiencies for dry matter and roots yield were also calculated. Results revealed that sugar beets and dry matter yield increased with increasing N input up to 100-150 kg N/ha which was indicated by the higher dry matter yield, and sugar beet yield. Sugar percentage was also increased relative to the average percentage recorded in Syria. Crop water use efficiencies, for both the drip-fertigated and surface-irrigated treatments were increased in most cases with increasing rate of nitrogen fertilizer. During the course of this study, small increases in soil salinity under both irrigation methods were observed. Higher increases in soil salinity was

Soil salinization in the agricultural lands of Rhodope District, northeastern Greece.

Science.gov (United States)

Pisinaras, V; Tsihrintzis, V A; Petalas, C; Ouzounis, K

2010-07-01

The objective of this study was to identify seasonal and spatial trends and soil salinization patterns in a part of Rhodope District irrigated land, northeastern Greece, located east of Vistonis Lagoon. The study area is irrigated from a coastal aquifer, where salt water intrusion occurs because of extensive groundwater withdrawals. Fourteen monitoring sites were established in harvest fields in the study area, where soil samples were collected. Electrical conductivity (ECe), pH, and ion concentrations were determined in the saturated paste extract of the soil samples in the laboratory using standard methods. A clear tendency was observed for ECe to increase from April to September, i.e., within the irrigation period, indicating the effect of saline groundwater to soil. In the last years, the change from moderately sensitive (e.g., corn) to moderately tolerant crops (e.g., cotton) in the south part of the study area indicates the impacts of soil salinity. The study proposes management methods to alleviate this problem.

7 CFR 1427.1203 - Eligible ELS cotton.

Science.gov (United States)

2010-01-01

... OF AGRICULTURE LOANS, PURCHASES, AND OTHER OPERATIONS COTTON Extra Long Staple (ELS) Cotton... must be either: (1) Baled lint, including baled lint classified by USDA's Agricultural Marketing..., under the provisions of this subpart, has been made available; (2) Imported ELS cotton; (3) Raw...

Variation in the sugar yield in response to drying-off of sugarcane before harvest and the occurrence of low air temperatures

Directory of Open Access Journals (Sweden)

Renato Araújo

2016-03-01

Full Text Available ABSTRACT The need to irrigate sugarcane in the Brazilian Savanna is due to the lack of rain from April to September. For efficient sugar accumulation, the crop needs water stress or heat stress at the maturation stage. However, when the water deficit is intense at this stage, it occurs the reduction in crop production. The objective of this study was: (i to assess the quality of the raw material of sugarcane in different drying-off seasons before harvest; (ii to evaluate the influence of heat stress on the culture. The experiment was conducted in Santo Antônio de Goiás (GO, Brazil, in Oxisol, with CTC4 variety in cane-plant cycle. A randomized block design in a split-plot array in time was used. The treatments of the plots were five drying-off times (90, 60, 30, 15 and 0 days before harvest and, in the subplots, five seasons of the yield evaluation. Irrigation was carried out by surface drip method, which provided 50% of crop water requirement. The best results for sugar yield occurred 30 days before harvest, period in which the crop irrigation could be interrupted. The water deficit of 37.76 mm appears to be the critical limit of water shortage in the soil, from which the sugarcane yield starts to be reduced. The sugar concentration in the stalk was more influenced by low air temperatures than sugarcane yield.

Condensation irrigation a system for desalination and irrigation

International Nuclear Information System (INIS)

Lindblom, J.; Nordell, B

2006-01-01

condensation irrigation is a system for both desalination and irrigation. The principles is that humidified air is let into an underground horizontal pipe system, where the air is cooled by the ground and humidity falls out as fresh water. The humidification could e.g. be achieved by evaporation of seawater in solar stills or any other heat source. By using drainage pipes for underground air transportation the water percolates into the soil, thereby irrigating the land. This study focuses on drinking water production, which means that humid air is led into plan pipes where the condensed water is collected at the pipe endings. Numerical simulations gave a study-state diurnal mean water production of 1.8 kg per meter of pipe over a 50 m pipe. Shorter pipes result in a greater mean production rate. Since the heat transfer of drainage pipes would be greater, current study indicates that condensation irrigation is a promising method for desalination and irrigation. Performed studies in condensation irrigation started at LTU in 2003. Current paper reports the initial theoretical work on the system.(Author)

Interaction of different irrigation strategies and soil textures on the nitrogen uptake of field grown potatoes

DEFF Research Database (Denmark)

Ahmadi, S.H.; Andersen, M.N.; Lærke, P.E.

2011-01-01

received 65% of FI after tuber bulking and lasted for six weeks until final harvest. Results showed that the irrigation treatments were not significantly different in terms of N uptake in the tubers, shoot, and whole crop. However, there was a statistical difference between the soil textures where plants...... in the loamy sand had the highest amount of N uptake. The interaction between irrigation treatments and soil textures was significant, and implied that under non-limiting water conditions, loamy sand is the suitable soil for potato production because plants can take up sufficient amounts of N and it could...... potentially lead to higher yield. However, under limited water conditions and applying water-saving irrigation strategies, sandy loam and coarse sand are better growth media because N is more available for the potatoes. The simple yield prediction model was developed that could explains ca. 96...

Review of ultrasonic irrigation in endodontics: increasing action of irrigating solutions

Science.gov (United States)

Mozo, Sandra; Llena, Carmen

2012-01-01

Introduction: Effective irrigant delivery and agitation are prerequisites for successful endodontic treatment. Ultrasonic irrigation can be performed with or without simultaneous ultrasonic instrumentation. Existing literature reveals that ultrasonic irrigation may have a very positive effect on chemical, biological and physical debridement of the root canal system as investigated in many in vitro studies. Objective: The purpose of this review article was to summarize and discuss the available information concerning ultrasonic irrigation in endodontics. Methods: This article presents an overview of ultrasonic irrigation methods and their debridement efficacy. In this paper the relevant literature on passive ultrasonic irrigation is reviewed. Information from original scientific papers or reviews listed in MEDLINE and Cochrane were included in the review. Results: The use of ultrasound in the irrigation procedure results in improved canal cleanliness, better irrigant transfer to the canal system, soft tissue debridement, and removal of smear layer and bacteria. There are many in vitro studies, but there is a need to standardize protocols, and correlate the clinical efficacy of ultrasonic devices with improved treatment outcomes. Understanding the basis of ultrasonic irrigation is fundamental for clinicians and researchers to improve the design and use of ultrasonic irrigation. Key words:Ultrasonic irrigation, ultrasound, smear layer, endodontics. PMID:22143738

Fertigação do algodoeiro utilizando efluente doméstico tratado Fertigation of cotton with treated domestic sewage

Directory of Open Access Journals (Sweden)

Osvaldo N Sousa Neto

2012-02-01

Full Text Available Conduziu-se um experimento no Campus da Universidade Federal Rural do Semiárido em Mossoró, RN, com o objetivo de avaliar o comportamento do algodoeiro (Gossypium hirsutum L. raça latifolium Hatch cultivar 8H, quanto ao aspecto crescimento, quando irrigado com efluentes domésticos tratados. O delineamento experimental adotado foi o de blocos casualizados com parcelas subdivididas e sendo testadas, nas parcelas, as diluições do efluente doméstico [25% - T1, 50% - T2, 75% - T3 e 100% de água residuária- T4 e água de abastecimento + adubação mineral do solo - T5] em dois solos de texturas contrastantes (Latossolo Vermelho Amarelo - S1 e Cambissolo - S2. A irrigação com água residuária influenciou significativamente o crescimento das plantas de algodoeiro, em referência ao índice de velocidade de emergência, à percentagem de germinação à altura de plantas, ao diâmetro caulinar e número de folhas e à área foliar e massa seca de parte aérea, crescendo com o aumento da proporção de uso do efluente doméstico. Houve efeito positivo do acúmulo de nutrientes no solo aplicados via fertirrigação sobre as variáveis estudadas. A fertirrigação com efluente doméstico tratado pode substituir a adubação convencional do algodoeiro.An experiment was conducted at the Universidade Federal Rural do Semi-arid in Mossoró, RN with the aim of evaluating the behavior of cotton (Gossypium hirsutum L. race latifolium Hatch 8H cultivar, in terms of growth when irrigated with treated domestic sewage. The experimental design was in randomized blocks with split plots and in plots were tested dilutions of wastewater [25% - T1, 50% - T2, 75% - T3 and 100% of wastewater - T4 and supply water with mineral fertilizer - T5] in two soils of contrasting textures. Irrigation with wastewater significantly influenced the growth of cotton plants, the rate of emergence, the germination percentage, plant height, stem diameter and leaf area, growing

Energy usage for cotton ginning in Australia

Energy Technology Data Exchange (ETDEWEB)

Ismail, S.A. [MARA Univ. of Technology, Shah Alam (Malaysia). Faculty of Applied Sciences; Southern Queensland Univ., Toowoomba, QLD (Australia). National Centre for Engineering in Agriculture; Chen, G.; Baillie, C.; Symes, T. [Southern Queensland Univ., Toowoomba, QLD (Australia). National Centre for Engineering in Agriculture

2010-07-01

This paper reported on a study that evaluated the energy consumption of cotton gins used in Australia. The average electricity use is 52.3 kWh per bale. In practicality, the electricity consumption for different gins is correlated linearly with the bale numbers produced. The cost of electricity is therefore important in cotton ginning operations. The power factor in all the gins monitored in this study was greater than 0.85. The study showed that the use of gas dryers was highly influenced by the cotton moisture and regulated drying temperature. In general, electricity and gas consumption comprised 61 and 39 per cent of total energy use respectively. The study showed that 60.38 kg of carbon dioxide are emitted for ginning each bale of cotton. This paper described a newly developed method for monitoring the energy performance in cotton gins. Detailed monitoring and analysis carried out at 2 gin sites revealed that electricity consumption is not influenced much by changes in trash content in the module, degree of moisture and lint quality. However, the cotton variety influences the energy consumption. Cotton handling constituted nearly 50 per cent of the power used in both gins.

Engineering cotton (Gossypium hirsutum L.) for resistance to cotton leaf curl disease using viral truncated AC1 DNA sequences.

Science.gov (United States)

Hashmi, Jamil A; Zafar, Yusuf; Arshad, Muhammad; Mansoor, Shahid; Asad, Shaheen

2011-04-01

Several important biological processes are performed by distinct functional domains found on replication-associated protein (Rep) encoded by AC1 of geminiviruses. Two truncated forms of replicase (tAC1) gene, capable of expressing only the N-terminal 669 bp (5'AC1) and C-terminal 783 bp (3'AC1) nucleotides cloned under transcriptional control of the CaMV35S were introduced into cotton (Gossypium hirsutum L.) using LBA4404 strain of Agrobacterium tumefaciens to make use of an interference strategy for impairing cotton leaf curl virus (CLCuV) infection in transgenic cotton. Compared with nontransformed control, we observed that transgenic cotton plants overexpressing either N-terminal (5'AC1) or C-terminal (3'AC1) sequences confer resistance to CLCuV by inhibiting replication of viral genomic and β satellite DNA components. Molecular analysis by Northern blot hybridization revealed high transgene expression in early and late growth stages associated with inhibition of CLCuV replication. Of the eight T(1) transgenic lines tested, six had delayed and minor symptoms as compared to nontransformed control lines which developed disease symptoms after 2-3 weeks of whitefly-mediated viral delivery. Virus biological assay and growth of T(2) plants proved that transgenic cotton plants overexpressing 5'- and 3'AC1 displayed high resistance level up to 72, 81%, respectively, as compared to non-transformed control plants following inoculation with viruliferous whiteflies giving significantly high cotton seed yield. Progeny analysis of these plants by polymerase chain reaction (PCR), Southern blotting and virus biological assay showed stable transgene, integration, inheritance and cotton leaf curl disease (CLCuD) resistance in two of the eight transgenic lines having single or two transgene insertions. Transgenic cotton expressing partial AC1 gene of CLCuV can be used as virus resistance source in cotton breeding programs aiming to improve virus resistance in cotton crop.

[Effects of cotton stalk biochar on microbial community structure and function of continuous cropping cotton rhizosphere soil in Xinjiang, China].

Science.gov (United States)

Gu, Mei-ying; Tang, Guang-mu; Liu, Hong-liang; Li, Zhi-qiang; Liu, Xiao-wei; Xu, Wan-li

2016-01-01

In this study, field trials were conducted to examine the effects of cotton stalk biochar on microbial population, function and structural diversity of microorganisms in rhizosphere soil of continuous cotton cropping field in Xinjiang by plate count, Biolog and DGGE methods. The experiment was a factorial design with four treatments: 1) normal fertilization with cotton stalk removed (NPK); 2) normal fertilization with cotton stalk powdered and returned to field (NPKS); 3) normal fertilization plus cotton stalk biochar at 22.50 t · hm⁻² (NPKB₁); and 4) normal fertilization plus cotton stalk biochar at 45.00 t · hm⁻² (NPKB₂). The results showed that cotton stalk biochar application obviously increased the numbers of bacteria and actinomycetes in the rhizospheric soil. Compared with NPK treatment, the number of fungi was significantly increased in the NPKB₁treatment, but not in the NPKB₂ treatment. However, the number of fungi was generally lower in the biochar amended (NPKB₁, NPKB₂) than in the cotton stalk applied plots (NPKS). Application of cotton stalk biochar increased values of AWCD, and significantly improved microbial richness index, suggesting that the microbial ability of utilizing carbohydrates, amino acids and carboxylic acids, especially phenolic acids was enhanced. The number of DGGE bands of NPKB₂ treatment was the greatest, with some species of Gemmatimonadetes, Acidobacteria, Proteobacteria and Actinobacteria being enriched. UPGMC Cluster analysis pointed out that bacterial communities in the rhizospheric soil of NPKB₂ treatment were different from those in the NPK, NPKS and NPKB₁treatments, which belonged to the same cluster. These results indicated that application of cotton stalk biochar could significantly increase microbial diversity and change soil bacterial community structure in the cotton rhizosphere soil, thus improving the health of soil ecosystem.

Nitrogen fertilization strategies for xaraes and tifton 85 grasses irrigated in the dry season

Directory of Open Access Journals (Sweden)

Domingos Sávio Queiroz

2012-08-01

Full Text Available An experiment was carried out to assess rates and nitrogen fertilization strategies on the forage yield using irrigation to supply the water deficit during the dry season. The grasses Cynodon spp cv. tifton 85 and Brachiaria brizantha cv. Xaraés were cultivated with nitrogen (N at levels of 200 and 400 kg/ha according to strategies: 1 half dose applied during the rainy season (RS and half during the dry season (DS; 2 1/3 during the RS and 2/3 during the DS; 3 2/3 during the RS and 1/3 during the DS; 4 all doses applied during the DS. In each season the dose was divided in three applications. Eleven harvests were conducted: six in the RS and five in the DS. When 2/3 of N was applied in the DS, forage yield in this period was statistically equivalent to those obtained in the RS in three of the five harvests for both 200 and 400 kg/ha of N. With 100% of N applied in the DS, the yield of four of five cuts of forage was similar to that obtained in the RS for both rates of N. The strategy of applying more N in the DS rather than in the RS was effective, keeping the yield steadily throughout the year. The application of 100% of the dose of 200 kg/ha N and 2/3 of the dose of 400 kg/ha N both in the dry period, under irrigation, promote uniform productions per harvest throughout the year.

Influence of Tencel/cotton blends on knitted fabric performance

Directory of Open Access Journals (Sweden)

Alaa Arafa Badr

2016-09-01

Full Text Available The requirements in terms of wearing comfort with sportswear, underwear and outerwear are widely linked to the use of new fibers. Today, Tencel fiber is one of the most important developments in regenerated cellulosic fiber. However, the relation between Tencel fiber properties and fabric characteristics has not been enough studied in the literature especially the influence of fiber materials on mechanical, Ultraviolet Protection Factor (UPF and absorption properties. Therefore, in this study, knitted fabric samples were manufactured with eight different yarns with two fabric types (single jersey and single jersey with Lycra. 30/1-Ne yarns from natural and regenerated cellulosic fibers: 50% Tencel-LF/50% cotton, 67% Tencel-LF/33% cotton, 67% Tencel-STD/33% cotton, 70% bamboo/30% cotton, 100% bamboo, 100% Modal, 100% Micro-Modal and 100% cotton were employed. Then, all the produced fabrics were subjected to five cycles laundering and then flat dried. The results show that 67% Tencel-LF/33% cotton has more flexural rigidity and withdrawing handle force than 67% Tencel-STD/33% cotton fabric, while 67% Tencel-STD/33% cotton has a merit of durability during bursting test. Blending Egyptian cotton fibers with bamboo and Tencel as in 70/30% bamboo/cotton and 50/50% Tencel-LF/cotton improve UPF of the produced fabric.

Semiochemicals from herbivory induced cotton plants enhance the foraging behavior of the cotton boll weevil, Anthonomus grandis.

Science.gov (United States)

Magalhães, D M; Borges, M; Laumann, R A; Sujii, E R; Mayon, P; Caulfield, J C; Midega, C A O; Khan, Z R; Pickett, J A; Birkett, M A; Blassioli-Moraes, M C

2012-12-01

The boll weevil, Anthonomus grandis, has been monitored through deployment of traps baited with aggregation pheromone components. However, field studies have shown that the number of insects caught in these traps is significantly reduced during cotton squaring, suggesting that volatiles produced by plants at this phenological stage may be involved in attraction. Here, we evaluated the chemical profile of volatile organic compounds (VOCs) emitted by undamaged or damaged cotton plants at different phenological stages, under different infestation conditions, and determined the attractiveness of these VOCs to adults of A. grandis. In addition, we investigated whether or not VOCs released by cotton plants enhanced the attractiveness of the aggregation pheromone emitted by male boll weevils. Behavioral responses of A. grandis to VOCs from conspecific-damaged, heterospecific-damaged (Spodoptera frugiperda and Euschistus heros) and undamaged cotton plants, at different phenological stages, were assessed in Y-tube olfactometers. The results showed that volatiles emitted from reproductive cotton plants damaged by conspecifics were attractive to adults boll weevils, whereas volatiles induced by heterospecific herbivores were not as attractive. Additionally, addition of boll weevil-induced volatiles from reproductive cotton plants to aggregation pheromone gave increased attraction, relative to the pheromone alone. The VOC profiles of undamaged and mechanically damaged cotton plants, in both phenological stages, were not different. Chemical analysis showed that cotton plants produced qualitatively similar volatile profiles regardless of damage type, but the quantities produced differed according to the plant's phenological stage and the herbivore species. Notably, vegetative cotton plants released higher amounts of VOCs compared to reproductive plants. At both stages, the highest rate of VOC release was observed in A. grandis-damaged plants. Results show that A. grandis uses

Reduced irrigation increases the water use efficiency and productivity of winter wheat-summer maize rotation on the North China Plain.

Science.gov (United States)

Wang, Yunqi; Zhang, Yinghua; Zhang, Rui; Li, Jinpeng; Zhang, Meng; Zhou, Shunli; Wang, Zhimin

2018-03-15

The groundwater table has fallen sharply over the last 30years on the North China Plain, resulting in a shortage of water for winter wheat irrigation. Reducing irrigation may be an important strategy to maintain agricultural sustainability in the region; however, few studies have evaluated the transition from conventional irrigation management practices to reduced irrigation management practices in the winter wheat-summer maize rotation system. Here, we compare the yield, water consumption, and water use efficiency of winter wheat-summer maize rotation under conventional irrigation and reduced irrigation on the North China Plain from 2012 to 2015. Reducing irrigation decreased the yield but increased the water use efficiency and significantly advanced the harvest date of winter wheat. As a result, the summer maize sowing date advanced significantly, and the flowering date subsequently advanced 2-8days, thus extending the summer maize grain-filling stage. Therefore, the yield and water use efficiency of summer maize were higher under reduced irrigation than conventional irrigation, which compensated for the winter wheat yield loss under reduced irrigation. In addition, under reduced irrigation from 2012 to 2015, the yield and water use efficiency advantage of the winter wheat-summer maize rotation ranged from 0.0 to 9.7% and from 4.1 to 14.7%, respectively, and water consumption and irrigated water decreased by 20-61mm and 150mm, respectively, compared to conventional irrigation. Overall, the reduced irrigation management practice involving no irrigation after sowing winter wheat, and sowing summer maize on June 7 produced the most favorable grain yield with superb water use efficiency in the winter wheat-summer maize rotation. This study indicates that reducing irrigation could be an efficient means to cope with water resource shortages while maintaining crop production sustainability on the North China Plain. Copyright © 2017. Published by Elsevier B.V.

Irrigation and Autocracy

DEFF Research Database (Denmark)

Bentzen, Jeanet Sinding; Kaarsen, Nicolai; Wingender, Asger Moll

We show that societies with a history of irrigation-based agriculture have been less likely to adopt democracy than societies with a history of rainfed agriculture. Rather than actual irrigation, the empirical analysis is based on how much irrigation potentially can increase yields.Irrigation pot...

Superhydrophobic cotton by fluorosilane modification

CSIR Research Space (South Africa)

Erasmus, E

2009-12-01

Full Text Available the treatment with fluorinated or silicon compounds)1-4 and by enhancing the surface roughness with a fractal structure5-8. Cotton, a cellulose-based material, that is greatly hydrophilic, is more benefited when made hydrophobic. Modification of cotton...

Drip irrigation using a PLC based adaptive irrigation system

OpenAIRE

Shahidian, S.; Serralheiro, R. P.; Teixeira, J. L.; Santos, F. L.; Oliveira, M. R. G.; Costa, J. L.; Toureiro, C.; Haie, Naim; Machado, R. M.

2009-01-01

Most of the water used by man goes to irrigation. A major part of this water is used to irrigate small plots where it is not feasible to implement full-scale Evapotranspiration based irrigation controllers. During the growth season crop water needs do not remain constant and varies depending on the canopy, growth stage and climate conditions such as temperature, wind, relative humidity and solar radiation. Thus, it is necessary to find an economic irrigation controller that can adapt the dail...

Bioinspiration and Biomimicry: Possibilities for Cotton Byproducts

Science.gov (United States)

The byproducts from cotton gins have commonly been referred to as cotton gin trash or cotton gin waste primarily because the lint and seed were the main focus of the operation and the byproducts were a financial liability that did not have a consistent market. Even though the byproducts were called ...

Cotton fiber quality determined by fruit position, temperature and management

OpenAIRE

Wang, X.; Evers, J.B.; Zhang, L.; Mao, L.; Pan, X.; Li, Z.

2013-01-01

CottonXL is a tool to explore cotton fiber quality in relation to fruit position, to improve cotton quality by optimizing cotton plant structure, as well as to help farmers understand how the structure of the cotton plant determines crop growth and quality.

Effects of Sowing Date and Limited Irrigation on Yield and Yield Components of Five Rainfed Wheat Varieties in Maragheh Region

Directory of Open Access Journals (Sweden)

A. R. Tavakkoli

2013-03-01

Full Text Available In order to investigate the effects of sowing date (SD and single irrigation (SI amounts on yield and yield components of rainfed wheat varieties, a field experiment was conducted as split-split plots arranged in a randomized complete blocks design with three replications during 2002-2004 at main station of Dryland Agricultural Research Institute in Maragheh, Iran. Treatments included three sowing dates (early, normal and late, three levels of single irrigation (rainfed, 50 mm and 100 mm only at planting time and five wheat varieties (three numbered lines, Azar2 and double-cross Shahi. Results revealed that interactions of SD, SI and wheat varieties were significant for grain yield, number of kernels per spike and water productivity (P≤0.01. Single irrigation at normal planting time increased grain yield, straw, biomass, harvest index, and water productivity. Grain yield and water productivity were increased by 131% and 84.8%, respectively. Single irrigation at late planting time was not significant on agronomic traits and produced low water productivity. Regarding the reaction of wheat to planting date and single irrigation, results showed that normal single irrigation can improve yield, yield components and water productivity index. The effectiveness of single irrigation under dryland conditions can be observed in all wheat cultivars. Although this effectiveness on yield and yield components is observable, but it is necessary to select the time of irrigation properly.

Rainwater in Egypt: quantity, distribution and harvesting

Directory of Open Access Journals (Sweden)

H.I. ABDEL-SHAFY

2010-11-01

Full Text Available Egypt has limited water resources, and it will be under water stress within the year 2030. Therefore, Egypt should consider the natural and non-conventional water resources to overcome such problem. Rain harvesting is one solution; but not all; particularly on the north coast by the Mediterranean Sea and the Red sea. In this paper, the rainwater issue is reviewed and discussed in terms of the quantities and distribution at different selected areas in Egypt. The amount of rain falls at different location in Egypt was collected for a period of 16 months. The data indicated that rainfall in Egypt is very scarce, with an annual average of 12 mm and ranges from 0 mm/year in the desert to 200 mm/year in the north coastal region. The maximum total amount of rain does not exceed 1.8 billion m3per year. However, the average annual amount of rainfall water that is effectively utilized for agriculture purposes is estimated to be 1 billion m3. Harvesting pilot plant was constructed and implemented in Alexandria directly on the Mediterranean Sea. The harvested rain was used for irrigation and treated for drinking. It was, therefore, recommended to develop sustainable catchments at appropriate locations in the rain-fed areas at the north coast as well as cost effective grafting of the indigenous technologies with the innovative techniques.

Cotton for removal of aquatic oil spills

International Nuclear Information System (INIS)

Parker, H.W.; Fedler, C.B.; Heintz, C.E.; Nash, P.T.; Carr, D.L.; Lu, M.

1992-01-01

Raw cotton has considerable potential for selective removal of spilled oil and oil products from surface waters, since the natural waxes on the raw cotton make it preferentially oil wet. This potential was recognized in the early seventies at Texas Tech University. More recently other research workers have considered cotton as an adsorbent for spilled oil. The adsorbent market is now dominated by synthetic materials, such as air-blown polypropylene fiber, inorganic clays, and recycled paper and paper products. This paper further examines the potential of cotton in relation to these other adsorbents. Emphasis is placed on the potential for complete biodegradation of oil-soaked cotton adsorbents as a means avoiding the expense for incineration and/or the long-term environmental risk associated with placing the used adsorbents in landfills

Efeito de fatores ambientais sobre a seletividade do alachlor ao algodoeiro Effect of environmental factors on the selectivity of alachlor to cotton

Directory of Open Access Journals (Sweden)

S.C. Guimarães

2007-12-01

cotton. The first assay used germination boxes with sand substrate to study two alachlor rates (0 and 96 µg kg-1 at temperatures of 20, 25, 30, and 35 ºC, combined with three levels of substrate moisture (40%, 60%, and 80% of water holding capacity and evaluated after 10 days. Seedling growth was affected by environmental conditions, but this response was reduced or cancelled when alachlor was present, with better conditions causing proportionally greater growth reductions. The herbicide caused reductions in aerial part traits and, to a greater extent, in root length. The second assay consisted of pots filled with soil substrate and three irrigation treatments (23, 34, and 45 mm studied after application of two alachlor levels (0 and 2.88 kg ha-1, and evaluated after 21 days. Higher irrigation levels caused reductions in fresh and dry matter of the roots. Alachlor reduced all variables measured in the aerial part of the cotton plants, but this effect, in general, had low intensity and was similar for all the irrigation levels. The independent effect between alachlor and irrigation does not support the assumption that higher water levels would increase herbicide leaching and its phytotoxicity to cotton.

Correlation Coefficient, Path Analysis and Drought Tolerance Indices for Wheat under Deficit Irrigation Conditions and Nitrogen Levels

Directory of Open Access Journals (Sweden)

A. R Tavakoli

2012-07-01

Full Text Available In order to investigate the indices of drought tolerance, correlation coefficient and path analysis at deficit irrigation and nitrogen experiment, this experiment was conducted as split plot arranged in a randomized complete block design (RCBD with three replications during 2000-2003 for wheat at Maragheh agricultural research station of DARI. The treatments were included four levels of deficit irrigation (Rainfed, 100, 160 and 220mm of water use as main plots and five nitrogen rates (0, 30, 60, 90 and 120 kg.N.ha-1 as sub plots. Grain, straw and biological yield, harvest index, productivity degree, plant height, kernel number per spike, Spike number per square meter and TKW determined from the middle of each plot. There were positive significant correlations due to grain yield with all variables: harvest index (r = 0.969 , Productivity degree (r = 0.952 , straw yield (r = 0.904 , plant height (r = 0.904 , biological yield (r = 0.824 , Spike number per square meter (r = 0.817 , kernel number per spike (r = 0.773 and TKW (r = 0.612 respectively. Results of path analysis showed that increase in grain yield was due to increase spike number per square meter and kernel number per spike respectively. On based of indices of drought tolerance (Tolerance Index, Mean Productivity, Geometric Mean Productivity and Harmonic Mean, treatment of %66full irrigation combined with 90KgN.ha-1 was substantially increased water productivity.

The merging of two dynasties--identification of an African cotton leaf curl disease-associated begomovirus with cotton in Pakistan.

Directory of Open Access Journals (Sweden)

Muhammad Nouman Tahir

Full Text Available Cotton leaf curl disease (CLCuD is a severe disease of cotton that occurs in Africa and Pakistan/northwestern India. The disease is caused by begomoviruses in association with specific betasatellites that differ between Africa and Asia. During survey of symptomatic cotton in Sindh (southern Pakistan Cotton leaf curl Gezira virus (CLCuGV, the begomovirus associated with CLCuD in Africa, was identified. However, the cognate African betasatellite (Cotton leaf curl Gezira betasatellite was not found. Instead, two Asian betasatellites, the CLCuD-associated Cotton leaf curl Multan betasatellite (CLCuMB and Chilli leaf curl betasatellite (ChLCB were identified. Inoculation of the experimental plant species Nicotiana benthamiana showed that CLCuGV was competent to maintain both CLCuMB and ChLCB. Interestingly, the enations typical of CLCuD were only induced by CLCuGV in the presence of CLCuMB. Also in infections involving both CLCuMB and ChLCB the enations typical of CLCuMB were less evident. This is the first time an African begomovirus has been identified on the Indian sub-continent, highlight the growing threat of begomoviruses and particularly the threat of CLCuD causing viruses to cotton cultivation in the rest of the world.

Evaluation of the Effect of Different Irrigation Levels of Drip Irrigation (Tape on Yield and Yield Components of Corn

Directory of Open Access Journals (Sweden)

mohammad karimi

2016-02-01

irrigation water in drip tape systems in one and two rows planting patterns with different plant densities. The experiment was conducted on randomized complete blocks as a split plot (Split block design with 3 replicates in the Qazvin region. Four levels of irrigation including: 80, 100 and 120 percent of water requirement with drip irrigation (tape and 100% water requirement with furrow irrigation (control treatment as main plots and method of planting (one and two rows with three levels of crop density including: 75000, 90000 and 105000 as subplots were considered. After harvesting, grain yield, number of rows per ear, number of kernels per ear row, number of grains per ear and 1000-kernel weigh were measured. Results and Discussion: The results of simple variance analysis of attributes showed that the method of planting has a significant difference on the level of 5% for grain yield, but on the other the measured attributes did not have any significant effect. The respective effect of planting method and crop density showed a significant difference on the level of 5% for grain yield, number of kernels per ear and the 1000-grain weight, whereas it did not have any significant effect on the other measured attributes. The respective effects of irrigation method, planting method and crop density showed a significant difference on the level of 1% for the attributes of the number of kernels per ear. The planting in one row resulted in significantly higher grain yields than the other planting patterns. In mean comparisons of the interactions between irrigation methods, crop density and planting method, grain yield in drip irrigation at a level of 120% water requirement in the two rows planting pattern and crop density equal to 75000 plants was shown in the lead on the level of 10%. The results showed that the yields of the treatments were only affected by the method of planting and planting of one row lead the planting of two rows. According to means comparison and water use

RAF/5/071: Enhancing Crop Nutrition and Soil and Water Management and Technology Transfer in Irrigated Systems for Increased Food Production and Income Generation (AFRA)

International Nuclear Information System (INIS)

Sijali, I.

2017-01-01

The overall objective is to enhance food security, income and the resilience of smallholder farmers through climate change adaptive, mitigation and coping strategies and specific objective to Improve water and nitrogen use efficiency under different irrigated cropping systems using quantifying nuclear technique. Technologies perfected at KALRO transferred to pastoral communities (Maasai land). Technologies included drip irrigation systems for vegetables and orchards, water harvesting ponds dam lining, Solar pump, greenhouse management techniques and introduction of new crops such as sweet potatoes, green grams and sorghums. A low-cost solar-powered irrigation pump has been developed by on-station testing and demonstration was done for a small solar pump

Microbial contamination of water-soaked cotton gauze and its cause.

Science.gov (United States)

Oie, S; Yoshida, H; Kamiya, A

2001-01-01

Seven in-use cotton gauze samples and three cotton balls soaked in sterile distilled water in canisters were investigated 7 days after they were prepared in hospital. All samples were contaminated with bacteria including 10(6) to 10(7) colony forming units/ml of Pseudomonas aeruginosa. In vitro viability tests using cotton gauze and cotton balls soaked in sterile distilled water revealed rapid proliferation of P. aeruginosa, Serratia marcescens and Candida albicans. Since the cotton gauze and the cotton balls were soaked in water containing nutrients, such as protein and glucose, these materials may be readily contaminated with bacteria including P. aeruginosa. Thus, when using cotton gauze and cotton balls containing water, microbial contamination should be expected.

Evaluation of Yield and Yield Components of Black Cumin (Nigella sativa L. under different Plant Density and Limited Irrigation Condition

Directory of Open Access Journals (Sweden)

Sh Rezvan Beidokhti

2012-10-01

Full Text Available Research on crop response to deficit irrigation is important to reduce agriculture water use in areas where water is limited resource. Using drought resistant landraces with irrigation scheduling based on phenological stages in semi-arid and arid regions may provide an opportunity to optimize irrigation efficiency and water savings in these regions. In order to evaluate of yield and yield components of black cumin under different plant density and limited irrigation condition an experiment was conducted in Research Farm of Islamic Azad University of Damghan during growing season of 2007-2008. The experimental treatments were arranged in split plots based on a complete randomized block design with three replications. The limited irrigation (based on phenological stages treatments were included: cutting irrigation at blooming (folded flowers, cutting irrigation at flowering stage, cutting irrigation at seed formation and normal weekly irrigation (control were allocated to the main plots and different plant density: 100, 150, 200 and 250 plant per square meter (m2 were allocated to sub plots. The results showed that the effect of limited irrigation, plant density and their interaction on plant height, number of follicle, follicle weight, number of seed, 1000 seed weight, seed yield, biological yield and harvest index Black Cumin. The highest yield and yield components was obtained in normal irrigation (control and 200 plant density and the lowest yield were obtained when irrigation cut at the blooming stage and 250 plant density. There was a significant correlation between seed yield and number (r=0.90, 1000 seed weight (r=0.95 and biological yield (r=0.97. Optimum plant density of black cumin was decreased under limited irrigation treatments. Under normal (control and limited irrigation, optimum plant density was 200 and 150 plant per (m2 respectively.

Water quality in irrigation and drainage networks of Thessaloniki plain in Greece related to land use, water management, and agroecosystem protection.

Science.gov (United States)

Litskas, Vassilis D; Aschonitis, Vassilis G; Antonopoulos, Vassilis Z

2010-04-01

A representative agricultural area of 150 ha located in a protected ecosystem (Axios River Delta, Thermaikos Gulf-N. Aegean, Greece) was selected in order to investigate water quality parameters [pH, electrical conductivity (EC(w)), NO(3)-N, NH(4)-N, total phosphorus (TP)] in irrigation and drainage water. In the study area, the cultivated crops are mainly rice, maize, cotton, and fodder. Surface irrigation methods are applied using open channels network, and irrigation water is supplied by Axios River, which is facing pollution problems. The return flow from surface runoff and the surplus of irrigation water are collected to drainage network and disposed to Thermaikos Gulf. A 2-year study (2006-2007) was conducted in order to evaluate the effects of land use and irrigation water management on the drainage water quality. The average pH and NO(3)-N concentration was higher in the irrigation water (8.0 and 1.3 mg/L, respectively) than that in the drainage water (7.6 and 1.0 mg/L, respectively). The average EC(W), NH(4)-N, and TP concentration was higher in the drainage water (1,754 muS/cm, 90.3 microg/L, and 0.2 mg/L, respectively) than that in the irrigation water (477.1 muS/cm, 46.7 microg/L, and 0.1 mg/L, respectively). Average irrigation efficiency was estimated at 47% and 51% in 2006 and 2007 growing seasons (April-October), respectively. The loads of NO(3)-N in both seasons were higher in the irrigation water (35.1 kg/ha in 2006 and 24.9 kg/ha in 2007) than those in the drainage water (8.1 kg/ha in 2006 and 7.6 kg/ha in 2007). The load of TP was higher in the irrigation water in season 2006 (2.8 kg/ha) than that in the drainage water (1.1 kg/ha). Total phosphorus load in 2007 was equal in irrigation and drainage water (1.2 kg/ha). Wetland conditions, due to rice irrigation regime, drainage network characteristics, and the crop distribution in the study area, affect the drainage water ending in the protected ecosystem of Thermaikos Gulf.

The implementation of biofiltration systems, rainwater tanks and urban irrigation in a single-layer urban canopy model

Science.gov (United States)

Demuzere, Matthias; Coutts, Andrew; Goehler, Maren; Broadbent, Ashley; Wouters, Hendrik; van Lipzig, Nicole; Gebert, Luke

2015-04-01

Urban vegetation is generally considered as a key tool to modify the urban energy balance through enhanced evapotranspiration (ET). Given that vegetation is most effective when it is healthy, stormwater harvesting and retention strategies (such as water sensitive urban design) could be used to support vegetation and promote ET. This study presents the implementation of a vegetated lined bio-filtration system (BFS) combined with a rainwater tank (RWT) and urban irrigation system in the single-layer urban canopy model Community Land Model-Urban. Runoff from roof and impervious road surface fractions is harvested and used to support an adequate soil moisture level for vegetation in the BFS. In a first stage, modelled soil moisture dynamics are evaluated and found reliable compared to observed soil moisture levels from biofiltration pits in Smith Street, Melbourne (Australia). Secondly, the impact of BFS, RWT and urban irrigation on ET is illustrated for a two-month period in 2012 using varying characteristics for all components. Results indicate that (i) a large amount of stormwater is potentially available for indoor and outdoor water demands, including irrigation of urban vegetation, (ii) ET from the BFS is an order of magnitude larger compared to the contributions from the impervious surfaces, even though the former only covers 10% of the surface fraction and (iii) attention should be paid to the cover fraction and soil texture of the BFS, size of the RWT and the surface fractions contributing to the collection of water in the RWT. Overall, this study reveals that this model development can effectuate future research with state-of-the-art urban climate models to further explore the benefits of vegetated biofiltration systems as a water sensitive urban design tool optimised with an urban irrigation system to maintain healthy vegetation.

Radiation synthesis of silver nanostructures in cotton matrix

International Nuclear Information System (INIS)

Chmielewska, Dagmara; Sartowska, Bożena

2012-01-01

Cotton is one of the most popular natural fibres, composed mainly of cellulose, which finds a wide range of applications in paper, textile and health care products industry. Researchers have focused their interest on the synthesis of cotton nanocomposites, which enhances its mechanical, thermal and antimicrobial properties by the incorporation of various nanoparticles into the cotton matrix. Silver is one of the most popular antimicrobial agents with a wide spectrum of antibacterial and antifungal activity that results from a complex mechanism of its interactions with the cells of harmful microorganism. In this work, electron beam radiation was applied to synthesise silver nanostructures in cotton fibres. Investigations of the influence of the initial silver salt concentration on the size and distribution of the obtained silver nanostructures were carried out. A detailed characterisation of these nanocomposites with SEM-BSE and EDS methods was performed. TGA and DSC analyses were performed to assess the influence of different size silver nanoparticles and the effect of electron beam irradiation on the thermal properties of cotton fibres. A microbiological investigation to determine the antibacterial activity of Ag-cotton nanocomposites was carried out. - Highlights: ► Ag NPs embedded in cotton matrix were synthesised by electron beam irradiation. ► Concentration of silver salt solution influences on size of silver nanoparticles. ► Silver content as well as irradiation affect thermal properties of cotton fabrics. ► Ag-cotton nanocomposites exhibit antibacterial activity against bacteria and fungi.

(Pleurotus pulmonarius) grown on cotton waste and cassava peel

African Journals Online (AJOL)

This work evaluated the yield of Pleurotus pulmonarius on different mixtures of cotton waste and cassava peel. P. pulmonarius demonstrated significantly higher colonization rate on cotton waste substrate (100 g cotton waste) 3 weeks after inoculation of spawn than any other substrate mixtures. Cotton waste had the ...

Acoustical evaluation of carbonized and activated cotton nonwovens.

Science.gov (United States)

Jiang, N; Chen, J Y; Parikh, D V

2009-12-01

An activated carbon fiber nonwoven (ACF) was manufactured from a cotton nonwoven fabric. For the ACF acoustic application, a nonwoven composite of ACF with cotton nonwoven as a base layer was developed. Also produced were the composites of the cotton nonwoven base layer with a layer of glassfiber nonwoven, and the cotton nonwoven base layer with a layer of cotton fiber nonwoven. Their noise absorption coefficients and sound transmission loss were measured using the Brüel and Kjaer impedance tube instrument. Statistical significance of the differences between the composites was tested using the method of Duncan's grouping. The study concluded that the ACF composite exhibited a greater ability to absorb normal incidence sound waves than the composites with either glassfiber or cotton fiber. The analysis of sound transmission loss revealed that the three composites still obeyed the mass law of transmission loss. The composite with the surface layer of cotton fiber nonwoven possessed a higher fabric density and therefore showed a better sound insulation than the composites with glassfiber and ACF.

BIOMETRIC PARAMETERS OF FIELD GROWN SESAME INFLUENCED BY ARBUSCULAR MYCORRHIZAL INOCULATION, ROCK PHOSPHATE FERTILIZATION AND IRRIGATION

Directory of Open Access Journals (Sweden)

V.S. Harikumar

2017-08-01

Full Text Available The aim of the study was to assess the effect of inoculation with arbuscular mycorrhizal fungi (AMF and rock phosphate (RP fertilization on biometric parameters and mycorrhizal colonization of field grown sesame under rainfed and irrigated conditions. Inoculation of AMF Funneliformis dimorphicus improved the biometric parameters of the crop such as leaf area (LA, leaf area index (LAI, specific leaf weight (SLW, net assimilation rate (NAR, oil index (OI as well as mycorrhizal colonization (%F in roots. Mycorrhizal inoculation however, did not give any positive response on harvest index (HI. LA, LAI and OI and %F showed a general increment in treatments of no added P (P0, while the other parameters such as SLW and NAR were improved by the application of RP at half the recommended dose (P50. HI did not respond to RP fertilization. Most of the parameters (LA, LAI, NAR, %F showed higher values under rainfed condition than irrigated condition whereas, SLW, HI and OI improved significantly under irrigated condition. Results indicated that the inoculation of AMF to field grown sesame can compensate for 50% of the recommended P fertilizer under a need based irrigation schedule, without affecting the biometric parameters.

ROOT CANAL IRRIGANTS AND IRRIGATION TECHNIQUES: A REVIEW

OpenAIRE

Aniketh; Mohamed; Geeta; Nandakishore; Gourav Kumar; Patrick Timothy; Jayson Mathew; Sahle Abdul

2015-01-01

Root canal irrigation is not much emphasised in endodontic therapy. Most articles discussed are on root canal shaping and obturation not much emphasis is given for irrigation. There are many irrigation solutions which are introduced into market. The primary objective of root canal therapy is the ret ention of the pulpless or pulpally involved tooth with its associated periapical tissues in a healthy state. Achievement of this objective requires that the pulpal spaces and con...

Reuse potential of laundry greywater for irrigation based on growth, water and nutrient use of tomato

Science.gov (United States)

Misra, R. K.; Patel, J. H.; Baxi, V. R.

2010-05-01

SummaryGreywater is considered as a valuable resource with a high reuse potential for irrigation of household lawns and gardens. However, there are possibilities of surfactant and sodium accumulation in soil from reuse of greywater which may affect agricultural productivity and environmental sustainability adversely. We conducted a glasshouse experiment to examine variation in growth, water and nutrient use of tomato ( Lycopersicon esculentum Mill. cv. Grosse Lisse) using tap water (TW), laundry greywater (GW) and solutions of low and high concentration of a detergent surfactant (LC and HC, respectively) as irrigation treatments. Each treatment was replicated five times using a randomised block design. Measurements throughout the experiment showed greywater to be significantly more alkaline and saline than the other types of irrigation water. Although all plants received 16 irrigations over a period of 9 weeks until flowering, there were little or no significant effects of irrigation treatments on plant growth. Soil water retention following irrigation reduced significantly when plants were irrigated with GW or surfactant solutions on only three of 12 occasions. On one occasion, water use measured as evapotranspiration (ET) with GW irrigation was similar to TW, but it was significantly higher than the plants receiving HC irrigation. At harvest, various components of plant biomass and leaf area for GW irrigated plants were found to be similar or significantly higher than the TW irrigated plants with a common trend of GW ⩾ TW > LC ⩾ HC. Whole-plant concentration was measured for 12 essential plant nutrients (N, P, K, Ca, Mg, S, Fe, Cu, Mn, Zn, Mo and B) and Na (often considered as a beneficial nutrient). Irrigation treatments affected the concentration of four nutrients (P, Fe, Zn and Na) and uptake of seven nutrients (P, K, Ca, Mg, Na, Fe and B) significantly. Uptake of these seven nutrients by tomato was generally in the order GW ⩾ TW > HC ⩾ LC. GW

Comparison of 2% chlorhexidine and 5.25% sodium hypochlorite irrigating solutions on postoperative pain: A randomized clinical trial

Directory of Open Access Journals (Sweden)

Bashetty Kusum

2010-01-01

Full Text Available Aim: To compare the levels of postoperative pain after cleaning and shaping of root canals using two different root canal irrigants for debridement. Materials and Methods: Forty patients with irreversible pulpitis, pulp necrosis and non-vital teeth exhibiting acute apical periodontitis requiring root canal treatment were included. At random, canals were cleaned and shaped with the following protocols. 2% chlorhexidine solution in group I and 5.25% sodium hypochlorite solution in group II were used as an irrigants. Access cavities were closed with a sterile cotton pellet and cavit. The patients recorded degree of pain at various time intervals after cleaning and shaping on a visual analogue scale for 1 week. Results: The mean pain score for group I was between 0.65 and 3.35 and for group II was between 0.95 and 4.50. There was significant difference in the pain level between the two groups only at 6 th hour postoperatively (P<0.05 and the pain was more in sodium hypochlorite group. Conclusions: More pain was present in teeth irrigated using 5.25% sodium hypochlorite when compared to that in teeth irrigated using 2% chlorhexidine solution. Significant difference in pain level was present only at 6th hour postoperatively, and at all other periods (24 th hour, 4 th and 7 th days there was no significant difference in pain level between the two groups.

Effect of Irrigation CutOff on Flowering Stage and Foliar Application of Spermidine on Some Quantitative and Qualitative Characteristics of Various Ecotypes of Cumin

Directory of Open Access Journals (Sweden)

Sarah Bakhtari

2017-02-01

Full Text Available Introduction: Medicinal plants play major roles in human health. . Cumin (Cuminum cyminum L. is an annual plant that commonly cultivated in arid and semiarid regions of Iran. The crop has a wide range of uses including medicinal, cosmetic and food industry. Cumin occupies about 26% of the total area devoted to medicinal plants in Iran. However, cumin is seriously affected by the Fusarium wilt and blight diseases. The diseases usually increase under warm and wet conditions. It was demonstrated that the peak of the disease incidence is occurring at the flowering stage and irrigation cutoff at this time may be reduced the diseases density. Materials and methods: In order to evaluate the effects of irrigation cutoff in flowering stage and foliar application of spermidine on some characteristics of various ecotype of cumin, an experiment was conducted in a split-split-plot arrangement in randomized complete block design with three replications at the research farm of Shahid Bahonar University of Kerman at 2014. The experimental treatments were irrigation in two levels (complete irrigation and cutoff the irrigation in flowering stage assigned to main plots, foliar application of spermidine in three levels (0, 1 and 2 Mm as a subplot and cumin ecotypes in three levels (Kerman, Khorasan and Esfahan that was randomized in sub-subplot. Plots size under the trial was 4 m × 3 m so as to get 50 cm inter row spacing in six rows. The ideal density of the crops was considered as 120 plant m-2. As soon as the seeds were sown, irrigation was applied every 10 days. Foliar application of spermidine was done at three stages (after thinning, before flowering stage and in the middle of flowering stage. No herbicides and chemical fertilizers were applied during the expriments. Results and discussion: In this study the number of branches, umbels per plant, 1000-seed weight, seed yield per plant and hectare, harvest index, essential oil percentage and yield, infected

Yield and economic performance of organic and conventional cotton-based farming systems--results from a field trial in India.

Science.gov (United States)

Forster, Dionys; Andres, Christian; Verma, Rajeev; Zundel, Christine; Messmer, Monika M; Mäder, Paul

2013-01-01

The debate on the relative benefits of conventional and organic farming systems has in recent time gained significant interest. So far, global agricultural development has focused on increased productivity rather than on a holistic natural resource management for food security. Thus, developing more sustainable farming practices on a large scale is of utmost importance. However, information concerning the performance of farming systems under organic and conventional management in tropical and subtropical regions is scarce. This study presents agronomic and economic data from the conversion phase (2007-2010) of a farming systems comparison trial on a Vertisol soil in Madhya Pradesh, central India. A cotton-soybean-wheat crop rotation under biodynamic, organic and conventional (with and without Bt cotton) management was investigated. We observed a significant yield gap between organic and conventional farming systems in the 1(st) crop cycle (cycle 1: 2007-2008) for cotton (-29%) and wheat (-27%), whereas in the 2(nd) crop cycle (cycle 2: 2009-2010) cotton and wheat yields were similar in all farming systems due to lower yields in the conventional systems. In contrast, organic soybean (a nitrogen fixing leguminous plant) yields were marginally lower than conventional yields (-1% in cycle 1, -11% in cycle 2). Averaged across all crops, conventional farming systems achieved significantly higher gross margins in cycle 1 (+29%), whereas in cycle 2 gross margins in organic farming systems were significantly higher (+25%) due to lower variable production costs but similar yields. Soybean gross margin was significantly higher in the organic system (+11%) across the four harvest years compared to the conventional systems. Our results suggest that organic soybean production is a viable option for smallholder farmers under the prevailing semi-arid conditions in India. Future research needs to elucidate the long-term productivity and profitability, particularly of cotton and

Towards a smart automated surface irrigation management in rice-growing areas in Italy

Directory of Open Access Journals (Sweden)

Daniele Masseroni

2017-02-01

Full Text Available Italy is the leading rice producer in Europe, accounting for more than half of the total high-quality production of this crop. Rice is traditionally grown in fields that remain flooded starting with crop establishment until close to harvest, and this traditional irrigation technique (i.e., continuous submergence is recognised as an important water resource sink (almost 40% of the irrigation water available worldwide is used for paddy areas. Meanwhile, the water management in rice areas requires a high level of labour because it is based on maintaining a predetermined water height in paddy fields and because the regulation of input and output flow is typically operated manually by the farmer. This study reveals the hardware and software characteristics of an automated and remote controlled technology tested for the first time in a rice farm near Pavia (Italy, during the 2016 growing season, aiming at a more efficient and less burdensome irrigation management system for rice fields. A water level sensor in the field provides the data required to govern the inflow regulation gate in real-time, according to the precise time to cut off the flow rate. Using a dedicated web page, the farmer can control flows, volumes and water levels in the fields by operating directly on the gate if necessary or setting the irrigation program according to his agronomic practices.

7 CFR 27.21 - Preparation of samples of cotton.

Science.gov (United States)

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Preparation of samples of cotton. 27.21 Section 27.21... REGULATIONS COTTON CLASSIFICATION UNDER COTTON FUTURES LEGISLATION Regulations Inspection and Samples § 27.21 Preparation of samples of cotton. The samples from each bale shall be prepared as specified in this section...

Analysis of Irrigation Water Quality at Kadawa Irrigation Project for Improved Productivity

Directory of Open Access Journals (Sweden)

AR Sanda

2014-09-01

Full Text Available In the face of water scarcity and the several negative consequences, such as water wastage, flooding, water logging, soil losses and production losses, conserving the finite amount of fresh water is a must. The quality of irrigation water must therefore be ascertained. The chemical quality of three sources of irrigation water from canal and drainage water, namely drainage water, fresh irrigation water from canal, and drainage/irrigation water mixture, were analyzed from Kadawa irrigation Project for year 2013 and 2014 cropping seasons, with the view to evaluating the potential risks associated with their use in irrigation and hence their suitability or otherwise for irrigation purposes. The analysis revealed that the use of drainage water alone for irrigation may result in problems associated with salinity, while a blend of drainage/irrigation water in the ratio of 1:1 is a viable means of water conservation and a good means of crop production. DOI: http://dx.doi.org/10.3126/ije.v3i3.11082 International Journal of Environment Vol.3(3 2014: 235-240

Evaluation of water harvesting and managed aquifer recharge potential in Upper Fara'basin in Palestine : Comparing MYWAS and water productivity approaches

NARCIS (Netherlands)

Tiehatten, B.M.H.; Assaf, K; Barhumic, Hala; Bastiaanssen, W.G.M.; Ghaneme, Marwan; Jayyousi, Anan; Marei, Amer; Mostert, E.; Shadeed, Sameer; Schoups, G.H.W.; Smidt, Ebel; Zayed, O

2017-01-01

The Upper Wadi Fara' basin, located at the West Bank, Palestine, has an average annual rainfall of 500 mm, which occurs only during winter. Agriculture uses stored soil water and complimentary irrigation from groundwater. Water harvesting (WH) and managed aquifer recharge (MAR) therefore is

STIFFNESS MODIFICATION OF COTTON IN CHITOSAN TREATMENT

Directory of Open Access Journals (Sweden)

CAMPOS Juan

2017-05-01

Full Text Available Chitosan is a biopolymer obtained from chitin, and among their most important aspects highlights its applications in a lot of industrial sectors due to its intrinsic properties, especially in the textile sector. In the last years, chitosan is widely used in the cotton and wool finishing processes due to its bond between them and its properties as an antifungical and antimicrobial properties. In this paper three different molecular weight chitosan are used in the finishing process of cotton to evaluate its influence in the surface properties modification. In order to evaluate the effect of the treatment with chitosan, flexural stiffness test is performed in warp and weft direction, and then the total value is calculated. The cotton fabric is treated with 5 g/L of different types of chitosan in an impregnation bath. This study shows the extent of surface properties modification of the cotton provided by three types of chitosan treatment. The results show that all types of chitosan modify the cotton flexural rigidity properties but the one which modifies it in a relevant manner is chitosan originated from shrimps. Chitosan, textile, flexural stiffnes, chitin, cotton.

Effectiveness of different irrigation protocols on calcium hydroxide removal from simulated immature teeth after apexification

Directory of Open Access Journals (Sweden)

Evren Ok

2015-01-01

Full Text Available Aim: To evaluate the effectiveness of different irrigation solutions and ultrasonic activation of the irrigation solutions on the removal of calcium hydroxide (Ca(OH2 from the simulated immature root canals after apexification. Materials and methods: One-hundred and one single-rooted teeth were used. The root canals were shaped with ProTaper rotary files up to F5. Simulation of roots with immature apices was carried out using size 4 Unicore drills. An injectable Ca(OH2 was injected into each root canal, and packed to the working length. Then, cotton pellets were placed over canal orifices, and apical and coronal parts of the roots were sealed with resin-modified glass ionomer cement, and light cured. Specimens were stored in distilled water for 3 months at 37°C. After 3 months, the temporary coronal seal was removed and the samples were randomly divided into: (a saline (n = 20, (b ultrasonic activation of saline (n = 20, (c sodium hypochlorite (NaOCl (n = 20, (d ultrasonic activation of NaOCl (n = 15, (e chlorhexidine digluconate (CHX (n = 20 and one positive control group (n = 3 and one negative control group (n = 3. The amount of remaining Ca(OH2 on the canal walls was measured under stereomicroscope with 30× magnification. Comparisons between groups were made by the non-parametric Kruskal-Wallis test and Dunn post-test at a significance level of p  0.05 groups. Conclusions: Irrigation solutions and ultrasonic activation of the irrigation solutions could not completely remove Ca(OH2 from the simulated immature root canals.

Ecological Sustainability of a Wheat-cotton Agroecosystem in Khorassan

Directory of Open Access Journals (Sweden)

abdolmajid mahdavi damghani

2009-06-01

Full Text Available In order to develop a sustainability index (SI for quantifying the sustainability of a wheat-cotton agroecosystem, a study was conducted in 2003 in the Khorassan province. Data of socio-economic, agronomic and ecological indicators were collected using 518 questionnaires. Results showed that only 18.6 percent of farmers gained the half or more of SI scores. The mean SI score was 44.0 which indicate that these agroecosystems are not sustainable. Results of this study are in consistent with other reports in other regions of the country. Livestock production, crop production, and water and irrigation indicators had the lowest score (6, 31, and 37, respectively. The backward stepwise regression analysis indicated that SI can be predicted from a linear combination of field size, wheat yield, crop residue management, crop income and education and extension services, while application of chemical fertilizers did not add to the prediction ability of SI. Results also showed that any progress in farmers’ education, economic viability, crop production management and water use efficiency could improve overall sustainability of these agroecosystems substantially.

Inheritance and segregation of exogenous genes in transgenic cotton

Indian Academy of Sciences (India)

Three transgenic cotton varieties (lines) were chosen for the study of inheritance and segregation of foreign Bt (Bacillus thuringiensis toxin) and tfdA genes in cotton. The transformed cotton varieties CCRI 30 and NewCott 33B expressing the Bt cryIA gene, and cotton line TFD expressing the tfdA gene were crossed with ...

Impact of water-fertilizer interaction on yields of crops

International Nuclear Information System (INIS)

Kahlown, M.A.; Iqbal, M.; Junejo, M.R.; Ghaffar, A.

2002-01-01

Water-fertilizer interaction was studied on wheat and cotton during crop seasons of 1995 to 1998 in the Fordwah Eastern Sadiqia (south), Irrigation and Drainage Project. Irrigation levels applied included 0.75, 1.00 and 1.25 times the evapotranspiration (ET), while fertilizer doses were 75, 100 and 125 percent of recommendations of NPK for district Bahawalnagar. The experiment was conducted at four different locations of the project, where soil was medium textured, free from salinity/alkalinity and sufficiently drained, with water table in the range of 2-3m from the soil surface. Wheat variety Inqalab-91 and cotton variety CLM-109 were sown at their recommended time of sowing, seed rate and management practices. Irrigation was applied in consideration of open-pan evaporation and crop co-efficient for the respective crop, when sum total of the products of pan-evaporation and KC values reached 7.5 cm. Irrigation was applied to all the plots according to treatment allowance, i.e. , with 25 percent cut and addition to .75 and 1.25 Et levels, respectively. The results indicated that irrigation levels had non-significant effect on wheat and cotton yields. The results clearly negate the concept of heavy irrigation, generally exercised by our farming community. Light irrigation as a results of 0.75 Et indication were equally effective: rather, these were economical and efficient under the scarce water availability. Fertilizer had somewhat significant response. Irrigation and fertilizer did not exhibit much significant interaction. In case of wheat, the two inputs were independent, while cotton had significant inter-dependence of the two variables. The experiment gave the conclusion that both wheat and cotton crops should be applied lighter irrigation and NPK fertilizer must be applied in compliance to recommendations, for efficient and economical use of the available crop-production resources. (author)

Irrigation management strategies to improve Water Use Efficiency of potatoes crop in Central Tunisia

Science.gov (United States)

Ghazouani, Hiba; Provenzano, Giuseppe; Rallo, Giovanni; Mguidiche, Amel; Douh, Boutheina; Boujelben, Abdelhamid

2015-04-01

In Tunisia, the expansion of irrigated area and the semiarid climate make it compulsory to adopt strategies of water management to increase water use efficiency. Subsurface drip irrigation (SDI), providing the application of high frequency small irrigation volumes below the soil surface have been increasingly used to enhance irrigation efficiency. At the same time, deficit irrigation (DI) has shown successful results with a large number of crop in various countries. However, for some crops like potatoes, DI is difficult to manage due to the rapid effect of water stress on tuber yield. Irrigation frequency is a key factor to schedule subsurface drip irrigation because, even maintaining the total seasonal volume, soil wetting patterns can result different during the growth period, with consequence on crop yield. Despite the need to enhance water use efficiency, only a few studies related to deficit irrigation of horticultural crops have been made in Tunisia. Objective of the paper was to assess the effects of different on-farm irrigation strategies on water use efficiency of potatoes crop irrigated with subsurface drip irrigation in a semiarid area of central Tunisia. After validation, Hydrus-2D model was used to simulate soil water status in the root zone, to evaluate actual crop evapotranspiration and then to estimate indirectly water use efficiency (IWUE), defined as the ratio between crop yield and total amount of water supplied with irrigation. Field experiments, were carried out in Central Tunisia (10° 33' 47.0" E, 35° 58' 8.1° N, 19 m a.s.l) on a potatoes crop planted in a sandy loam soil, during the growing season 2014, from January 15 (plantation of tubers) to May 6 (harvesting). Soil water status was monitored in two plots (T1 and T2) maintained under the same management, but different irrigation volumes, provided by a SDI system. In particular, irrigation was scheduled according to the average water content measured in the root zone, with a total of 8

Green and blue water footprint reduction in irrigated agriculture: effect of irrigation techniques, irrigation strategies and mulching

Science.gov (United States)

Chukalla, A. D.; Krol, M. S.; Hoekstra, A. Y.

2015-12-01

Consumptive water footprint (WF) reduction in irrigated crop production is essential given the increasing competition for freshwater. This study explores the effect of three management practices on the soil water balance and plant growth, specifically on evapotranspiration (ET) and yield (Y) and thus the consumptive WF of crops (ET / Y). The management practices are four irrigation techniques (furrow, sprinkler, drip and subsurface drip (SSD)), four irrigation strategies (full (FI), deficit (DI), supplementary (SI) and no irrigation), and three mulching practices (no mulching, organic (OML) and synthetic (SML) mulching). Various cases were considered: arid, semi-arid, sub-humid and humid environments in Israel, Spain, Italy and the UK, respectively; wet, normal and dry years; three soil types (sand, sandy loam and silty clay loam); and three crops (maize, potato and tomato). The AquaCrop model and the global WF accounting standard were used to relate the management practices to effects on ET, Y and WF. For each management practice, the associated green, blue and total consumptive WF were compared to the reference case (furrow irrigation, full irrigation, no mulching). The average reduction in the consumptive WF is 8-10 % if we change from the reference to drip or SSD, 13 % when changing to OML, 17-18 % when moving to drip or SSD in combination with OML, and 28 % for drip or SSD in combination with SML. All before-mentioned reductions increase by one or a few per cent when moving from full to deficit irrigation. Reduction in overall consumptive WF always goes together with an increasing ratio of green to blue WF. The WF of growing a crop for a particular environment is smallest under DI, followed by FI, SI and rain-fed. Growing crops with sprinkler irrigation has the largest consumptive WF, followed by furrow, drip and SSD. Furrow irrigation has a smaller consumptive WF compared with sprinkler, even though the classical measure of "irrigation efficiency" for furrow

Balancing ecosystem services with energy and food security - Assessing trade-offs from reservoir operation and irrigation investments in Kenya's Tana Basin

Science.gov (United States)

Hurford, A. P.; Harou, J. J.

2014-08-01

Competition for water between key economic sectors and the environment means agreeing allocations is challenging. Managing releases from the three major dams in Kenya's Tana River basin with its 4.4 million inhabitants, 567 MW of installed hydropower capacity, 33 000 ha of irrigation and ecologically important wetlands and forests is a pertinent example. This research seeks firstly to identify and help decision-makers visualise reservoir management strategies which result in the best possible (Pareto-optimal) allocation of benefits between sectors. Secondly, it seeks to show how trade-offs between achievable benefits shift with the implementation of proposed new rice, cotton and biofuel irrigation projects. To approximate the Pareto-optimal trade-offs we link a water resources management simulation model to a multi-criteria search algorithm. The decisions or "levers" of the management problem are volume-dependent release rules for the three major dams and extent of investment in new irrigation schemes. These decisions are optimised for eight objectives covering the provision of water supply and irrigation, energy generation and maintenance of ecosystem services. Trade-off plots allow decision-makers to assess multi-reservoir rule-sets and irrigation investment options by visualising their impacts on different beneficiaries. Results quantify how economic gains from proposed irrigation schemes trade-off against the disturbance of ecosystems and local livelihoods that depend on them. Full implementation of the proposed schemes is shown to come at a high environmental and social cost. The clarity and comprehensiveness of "best-case" trade-off analysis is a useful vantage point from which to tackle the interdependence and complexity of "water-energy-food nexus" resource security issues.

PRODUCTION COMPONENTS OF Vigna unguiculata (L. Walp IRRIGATED WITH BRACKISH WATER UNDER DIFFERENT LEACHING FRACTIONS

Directory of Open Access Journals (Sweden)

JOSÉ FRANCISCO DE CARVALHO

2016-01-01

Full Text Available The objective of this work was to evaluate the production components of cowpea ( Vigna unguiculata L. Walp subjected to irrigation with brackish water and different leaching fractions. The experiment was conducted in a lysimeter system of the Department of Agricultural Engineering of the Federal Rural University of Pernambuco, Recife campus. The treatments, consisting of two water salinity levels (ECw (1.2 and 3.3 dS m - 1 and five leaching fractions (0, 5, 10, 15 and 20%, were evaluated using a completely randomized design in a 2x5 factorial arrangement with four replications. The variables evaluated were: number of pods per plant, 100 - grain weight, number of grains per pod, grain and shoot dry weight, grain yield and harvest index. The soil salinity increased with increasing salinity of the water used for irrigation, and reduced with increasing leaching fraction. The salinity of the water used for irrigation influenced only the variables number of pods per plant and grain yield. The estimated leaching fractions of 9.1% and 9.6% inhibited the damage caused by salinity on the number of pods per plant and grain yield, respectively. Therefore, the production of V. unguiculata irrigated with brackish water, leaching salts from the plant root environment, is possible under the conditions evaluated.

Root canal irrigants

OpenAIRE

Kandaswamy, Deivanayagam; Venkateshbabu, Nagendrababu

2010-01-01

Successful root canal therapy relies on the combination of proper instrumentation, irrigation, and obturation of the root canal. Of these three essential steps of root canal therapy, irrigation of the root canal is the most important determinant in the healing of the periapical tissues. The primary endodontic treatment goal must thus be to optimize root canal disinfection and to prevent reinfection. In this review of the literature, various irrigants and the interactions between irrigants are...

75 FR 50847 - Cotton Program Changes for Upland Cotton, Adjusted World Price, and Active Shipping Orders

Science.gov (United States)

2010-08-18

... Cotton Program Changes for Upland Cotton, Adjusted World Price, and Active Shipping Orders AGENCY... Assistance Program (EAAP) and clarifying the definition of ``active shipping order.'' DATES: Effective Date... address that matter this rule amends in the payment calculation for semi-processed and reginned motes in 7...

THE ELASTICITY OF EXPORT DEMAND FOR US COTTON

OpenAIRE

Paudel, Laxmi; Houston, Jack E.; Adhikari, Murali; Devkota, Nirmala

2004-01-01

There exist conflicting views among the researchers about the magnitudes of US cotton export demand elasticity, ranging from the highly inelastic to highly elastic. An Armington model was used to analyze the export demand elasticity of US Cotton. Our analysis confirms an elastic nature of US cotton export demand.

7 CFR 1427.23 - Cotton loan deficiency payments.

Science.gov (United States)

2010-01-01

..., DEPARTMENT OF AGRICULTURE LOANS, PURCHASES, AND OTHER OPERATIONS COTTON Nonrecourse Cotton Loan and Loan... intentions to receive a loan deficiency payment on the identified commodity or (ii) A completed request for a... cotton based on a locked-in adjusted world price, provide identifying numbers for modules or other...

Fourier transform infrared imaging of Cotton trash mixtures

Science.gov (United States)

There is much interest in the identification of trash types comingled with cotton lint. A good understanding of the specific trash types present can lead to the fabrication of new equipment which can identify and sort cotton trash found with cotton fiber. Conventional methods, including the High Vo...

Novel search algorithms for a mid-infrared spectral library of cotton contaminants.

Science.gov (United States)

Loudermilk, J Brian; Himmelsbach, David S; Barton, Franklin E; de Haseth, James A

2008-06-01

During harvest, a variety of plant based contaminants are collected along with cotton lint. The USDA previously created a mid-infrared, attenuated total reflection (ATR), Fourier transform infrared (FT-IR) spectral library of cotton contaminants for contaminant identification as the contaminants have negative impacts on yarn quality. This library has shown impressive identification rates for extremely similar cellulose based contaminants in cases where the library was representative of the samples searched. When spectra of contaminant samples from crops grown in different geographic locations, seasons, and conditions and measured with a different spectrometer and accessories were searched, identification rates for standard search algorithms decreased significantly. Six standard algorithms were examined: dot product, correlation, sum of absolute values of differences, sum of the square root of the absolute values of differences, sum of absolute values of differences of derivatives, and sum of squared differences of derivatives. Four categories of contaminants derived from cotton plants were considered: leaf, stem, seed coat, and hull. Experiments revealed that the performance of the standard search algorithms depended upon the category of sample being searched and that different algorithms provided complementary information about sample identity. These results indicated that choosing a single standard algorithm to search the library was not possible. Three voting scheme algorithms based on result frequency, result rank, category frequency, or a combination of these factors for the results returned by the standard algorithms were developed and tested for their capability to overcome the unpredictability of the standard algorithms' performances. The group voting scheme search was based on the number of spectra from each category of samples represented in the library returned in the top ten results of the standard algorithms. This group algorithm was able to identify

Gene cloning: exploring cotton functional genomics and genetic improvement

Institute of Scientific and Technical Information of China (English)

Diqiu LIU; Xianlong ZHANG

2008-01-01

Cotton is the most important natural fiber plant in the world. The genetic improvement of the quality of the cotton fiber and agricultural productivity is imperative under the situation of increasing consumption and rapid development of textile technology. Recently, the study of cotton molecular biology has progressed greatly. A lot of specifically or preferentially expressed cotton fiber genes were cloned and analyzed. On the other hand, identification of stress response genes expressed in cotton was performed by other research groups. The major stress factors were studied including the wilt pathogens Verticillium dahliae, Fusarium oxy-sporum f. sp. vasinfectum, bacterial blight, root-knot nematode, drought, and salt stress. What is more, a few genes related to the biosynthesis of gossypol, other sesquiterpene phytoalexins and the major seed oil fatty acids were isolated from cotton. In the present review, we focused on the major advances in cotton gene cloning and expression profiling in the recent years.

Multi-Dimensional Evaluation of Simulated Small-Scale Irrigation Intervention: A Case Study in Dimbasinia Watershed, Ghana

Directory of Open Access Journals (Sweden)

Abeyou W. Worqlul

2018-05-01

Full Text Available This paper studied the impacts of small-scale irrigation (SSI interventions on environmental sustainability, agricultural production, and socio-economics using an Integrated Decision Support System (IDSS. The IDSS is comprised of a suite of models, namely the Soil and Water Assessment Tool (SWAT, Agricultural Policy/Environmental eXtender (APEX, and Farm Income and Nutrition Simulator (FARMSIM. The IDSS was applied in Dimbasinia watershed in northern Ghana using irrigation water from shallow groundwater. The watershed has a modest amount of shallow groundwater resources. However, the average annual irrigation water requirement exceeded the average annual shallow groundwater recharge. It was found that the current crop yield in Dimbasinia watershed was only ~40% of the potential crop production. This is mainly related to climate variability, low soil fertility, and land-management practices. For example, application of 50 kg/ha urea and 50 kg/ha DAP doubled maize and sorghum yield from the current farmers’ practices. Better income was obtained when irrigated vegetables/fodder were cultivated in rotation with sorghum as compared to in rotation with maize. Investment in solar pumps paid better dividends and also supplied clean energy. The socio-economic analysis indicated that having irrigated dry season vegetables will improve household nutrition. Since shallow groundwater recharge alone may not provide sufficient water for irrigation in a sustainable manner, surface water may be stored using water-harvesting structures to supplement the groundwater for irrigation. Integrated use of the water resources will also reduce depletion of the shallow groundwater aquifer. We conclude that IDSS is a promising tool to study gaps and constraints as well as upscaling of SSI.

Development of seedlings of watermelon cv. Crimson Sweet irrigated with biosaline water

Directory of Open Access Journals (Sweden)

José E. S. B. da Silva

2015-09-01

Full Text Available ABSTRACTThe limited access and the scarcity of good quality water for agriculture are some of the major problems faced in agricultural areas, particularly in arid and semiarid regions. The aim of this study was to evaluate the quality of watermelon seedlings (cv. Crimson Sweet, irrigated with different concentrations of biosaline water of fish culture. The experimental design was completely randomized with five treatments, corresponding to biosaline water at different concentrations (0, 33, 50, 67 and 100%, and four replicates of 108 seedlings. Watermelon seeds were sown in plastic trays filled with commercial substrate and irrigated with different solutions of biosaline water. Seedlings were harvested for biometric analysis at 14, 21 and 28 days after sowing. The use of biosaline water did not affect emergence and establishment of seedlings until 14 days after sowing, the period recommended for transplantation. However, the use of biosaline water affected the development of seedlings with longer exposure time.

3rd stage seed-cotton cleaning system PM10 emission factors and rates for cotton gins

Science.gov (United States)

This manuscript is part of a series of manuscripts that characterize cotton gin emissions from the standpoint of stack sampling. The impetus behind this project was the urgent need to collect additional cotton gin emissions data to address current regulatory issues. A key component of this study was...

2nd stage seed-cotton cleaning system PM10 emission factors and rates for cotton gins

Science.gov (United States)

This manuscript is part of a series of manuscripts that characterize cotton gin emissions from the standpoint of stack sampling. The impetus behind this project was the urgent need to collect additional cotton gin emissions data to address current regulatory issues. A key component of this study was...

1st stage seed-cotton cleaning system PM10 emission factors and rates for cotton gins

Science.gov (United States)

This manuscript is part of a series of manuscripts that characterize cotton gin emissions from the standpoint of stack sampling. The impetus behind this project was the urgent need to collect additional cotton gin emissions data to address current regulatory issues. A key component of this study was...

EFEITO DA IRRIGAÇÃO NO RENDIMENTO E QUALIDADE DE FIBRAS EM CULTIVARES DE ALGODOEIRO HERBÁCEO

Directory of Open Access Journals (Sweden)

JOÃO HENRIQUE ZONTA

2015-01-01

Full Text Available This study was conducted to evaluate seed cotton yield, fiber yield, and fiber quality traits of cotton cultivars grown under different irrigation levels in Brazil. The experiment was conducted over two years in the region of Apodi – RN, with sprinkler irrigation. Treatments comprised of 4 irrigation levels i.e., 130, 100, 70 and 40 % of the crop evapotranspiration (ETc and 4 cotton cultivars i.e., FiberMax 993, BRS 286, BRS 336 and BRS 335. The experimental design was factorial with randomized complete block design and four replicates. Yield, lint percent and fiber quality traits determined were evaluated. Different responses were observed for cultivars at various irrigation levels. Cultivars grown under limited irrigation exhibited a decline in the seed cotton yield, lint percent, and fiber quality. Cultivars with the highest yield and lint percent were FiberMax 993 and BRS 286. Within irrigation level of 40 % ETc, the medium fiber cultivars produced short fibers whereas the long fiber cultivar, BRS 336, produced medium fiber length. Overall, the different levels of water deficits did not significantly affect fiber quality of the four cultivars tested as all fiber quality traits re- mained acceptable for the domestic textile industry.

The Effect of Irrigation Intervals and Arbuscular Mycorrhizal Fungi on Chlorophyll Index, Yield and Yield Components of Grain Sorghum

Directory of Open Access Journals (Sweden)

J. Hamzei

2014-08-01

Full Text Available This experiment was carried out to study the effect of irrigation intervals and arbuscular mycorrhizal fungi on chlorophyll index, yield and yield components of grain sorghum. A factorial experiment was done based on randomized complete block design (RCBD with three replications at the Agriculture Research Station faculty of Agriculture, Bu- Ali Sina University in growing season of 2011. Irrigation intervals (7, 14 and 21 days with three levels of seed inoculation (control without inoculation, inoculation with Glomus mossea and inoculation with G. intraradices were the experimental treatments. Results indicated that the effect of irrigation intervals and mycorrhizal fungi were significant for traits of chlorophyll index, percentage of root symbiosis (PRS, number of grain per panicle, 1000 seed weight, grain yield and harvest index (HI. Maximum value for each trait was observed at G. mossea treatment. G. mossea treatment in comparison with G. intraradices and control treatment can increase the grain yield of sorghum up to 6.80 and 23.10%, respectively. Also, with increasing irrigation interval from 7 to 21 days, PRS increased up to 27.9%. Maximum value for grain yield (755 g m-2 was achieved at irrigation every 14 days and application of G. mossea treatment. But, there was no significant difference between irrigation sorghum plants every 14 days and application of G. mossea and irrigation every 7 days and application of either G. mossea or G. intraradices. In general, irrigation of sorghum plants every 14 days and supplying of G. mossea can produce the highest grain yield, while decreasing water consumption for sorghum production.

Effects of Different Densities of Cotton (Gossypium Hirsutum and Common Lambsquarter (Chenopodium Album on Some Cotton Growth Characteristics in Birjand Condition

Directory of Open Access Journals (Sweden)

M. Velayati

2011-01-01

Full Text Available Abstract Weeds are problematic plants in agroecosystems as a competitor for crops. In order to evaluate effects of cotton (Gossypium hirsutum and common lambsquarter (Chenopodium album densities on some crop growth indices, a study was conducted during 2006 in Experimental Station of Faculty of Agriculture, The University of Birjand as factorial experiment based on complete randomized block design with four replications. Three densities of cotton (6, 9 and 12 Pl.m-2 and four weed densities (0, 6, 9 and 12 Pl.m-2 were used to provide different weed interference levels. Indeed, three plots in each replication were intended to cultivation of lambsquarter alone at 6, 9 or 12 Pl.m-2. Results showed that crop growth rate (CGR of cotton was influenced by weed density, and its relative growth rate (RGR and net assimilation rate (NAR indicated a declining trend as weed density increased. Dry matter accumulation of cotton also was affected negatively by weed densities, as interference of lambsquarter at 6, 9 and 12 Pl.m-2 resulted to 35, 42 and 48 percent dry matter reduction, respectively, than weed-free treatment. Increasing of cotton density could partly compensate for negative impact of weed attendance on cotton growth. Thus, it seems higher plant densities can be used as a managing tool against weeds in cotton fields to avoid reduction of yield. Keywords: Cotton, Density, Weed, competition, Growth analysis

Identification of Marker-Trait Associations for Lint Traits in Cotton

Science.gov (United States)

Iqbal, Muhammad A.; Rahman, Mehboob-ur-

2017-01-01

Harvesting high quality lint, a long-awaited breeding goal—accomplished partly, can be achieved by identifying DNA markers which could be used for diagnosing cotton plants containing the desired traits. In the present studies, a total of 185 cotton genotypes exhibiting diversity for lint traits were selected from a set of 546 genotypes evaluated for fiber traits in 2009. These genotypes were extensively studied for three consecutive years (2011–2013) at three different locations. Significant genetic variations were found for average boll weight, ginning out turn (GOT), micronaire value, staple length, fiber bundle strength, and uniformity index. IR-NIBGE-3701 showed maximum GOT (43.63%). Clustering of genotypes using Ward's method was found more informative than that of the clusters generated by principal component analysis. A total of 382 SSRs were surveyed on 10 Gossypium hirsutum genotypes exhibiting contrasting fiber traits. Out of these, 95 polymorphic SSR primer pairs were then surveyed on 185 genotypes. The gene diversity averaged 0.191 and the polymorphic information content (PIC) averaged 0.175. Unweighted pair group method with arithmetic mean (UPGMA), principal coordinate analysis (PCoA), and STRUCTURE software grouped these genotypes into four major clusters each. Genetic distance within the clusters ranged from 0.0587 to 0.1030. A total of 47 (25.41%) genotypes exhibited shared ancestry. In total 6.8% (r2 ≥ 0.05) and 4.4% (r2 ≥ 0.1) of the marker pairs showed significant linkage disequilibrium (LD). A number of marker-trait associations (in total 75) including 13 for average boll weight, 18 for GOT percentage, eight for micronaire value, 18 for staple length, three for fiber bundle strength, and 15 for uniformity index were calculated. Out of these, MGHES-51 was associated with all the traits. Most of the marker-trait associations were novel while few validated the associations reported in the previous studies. High frequency of favorable

21 CFR 182.70 - Substances migrating from cotton and cotton fabrics used in dry food packaging.

Science.gov (United States)

2010-04-01

... used in dry food packaging. 182.70 Section 182.70 Food and Drugs FOOD AND DRUG ADMINISTRATION... used in dry food packaging. Substances migrating to food from cotton and cotton fabrics used in dry food packaging that are generally recognized as safe for their intended use, within the meaning of...

On the control of irrigation through soil moisture measurement using a neutron depth probe in horizontal subsurface measuring circuits

International Nuclear Information System (INIS)

Schaecke, B.; Schaecke, E.

1977-01-01

An outline is given of the advantages inherent in soil moisture measurement by means of a neutron probe in horizontal subsurface measuring circuits for irrigation control. Preliminary experience for the setting up of a field calibration curve and for practical measurement are submitted. This technique includes the following advantages: almost complete covering of the upper soil range which is of interest to irrigation control; good measuring density; suitable distribution of measuring points per unit area; possibility of continuous probe passage; optimal repeatability of measurements; exploration of a unit area with but few measuring circuits; no obstacles to tillage, drilling, intercultivation and harvest operations; and complete conservation of crop and plot which is not reached with any other soil moisture measurement technique so far available. Making use of the above advantages, the new technique allows automatic irrigation control with only one neutron depth probe. (author)

Relay cropping of wheat (Triticum aestivum L.) in cotton (Gossypium hirsutum L.) improves the profitability of cotton-wheat cropping system in Punjab, Pakistan.

Science.gov (United States)

Sajjad, Aamer; Anjum, Shakeel Ahmad; Ahmad, Riaz; Waraich, Ejaz Ahmad

2018-01-01

Delayed sowing of wheat (Triticum aestivum L.) in cotton-based system reduces the productivity and profitability of the cotton-wheat cropping system. In this scenario, relay cropping of wheat in standing cotton might be a viable option to ensure the timely wheat sowing with simultaneous improvement in wheat yields and system profitability. This 2-year study (2012-2013 and 2013-2014) aimed to evaluate the influence of sowing dates and relay cropping combined with different management techniques of cotton sticks on the wheat yield, soil physical properties, and the profitability of the cotton-wheat system. The experiment consisted of five treatments viz. (S1) sowing of wheat at the 7th of November by conventional tillage (two disc harrows + one rotavator + two plankings) after the removal of cotton sticks, (S2) sowing of wheat at the 7th of November by conventional tillage (two disc harrows + two plankings) after the incorporation of cotton sticks in the field with a rotavator, (S3) sowing of wheat at the 7th of November as relay crop in standing cotton with broadcast method, (S4) sowing of wheat at the 15th of December by conventional tillage (two disc harrows + one rotavator + two plankings) after the removal of cotton sticks, and (S5) sowing of wheat at the 15th of December by conventional tillage (two disc harrows + two plankings) after the incorporation of cotton sticks in the field with a rotavator. The highest seed cotton yield was observed in the S5 treatment which was statistically similar with the S3 and S4 treatments; seed cotton yield in the S1 and S2 treatments has been the lowest in both years of experimentation. However, the S2 treatment produced substantially higher root length, biological yield, and grain yield of wheat than the other treatments. The lower soil bulk density at 0-10-cm depth was recorded in the S2 treatment which was statistically similar with the S5 treatment during both years of experimentation. The volumetric water contents, net

Factors affecting irrigant extrusion during root canal irrigation: a systematic review

NARCIS (Netherlands)

Boutsioukis, C.; Psimma, Z.; van der Sluis, L.W.M.

2013-01-01

The aim of the present study was to conduct a systematic review and critical analysis of published data on irrigant extrusion to identify factors causing, affecting or predisposing to irrigant extrusion during root canal irrigation of human mature permanent teeth. An electronic search was conducted

Utility of the end-of-season nitrate test for nitrogen sufficiency of irrigated maize under Mediterranean semi-arid conditions

Energy Technology Data Exchange (ETDEWEB)

Isla, R.; Salmeron, M.; Cavero, J.; Yagüe, M.R.; Quilez, D.

2015-07-01

Calibration of decision tools to improve N fertilizer management is critical to increase its adoption by maize (Zea mays L.) growers. The objective of this study was to establish nitrate and total nitrogen concentrations in the basal maize stalks (BMS) at harvest to separate maize fields among three N availability categories (N-deficient, N-optimum, and N-excess) under Mediterranean irrigated semiarid conditions. We analysed data from 26 irrigated maize trials conducted between 2001 and 2012. Trials included treatments receiving different N fertilizer rates and sources (mineral and organic), irrigation systems (flood, sprinkler) and soil types. The critical nitrate concentration in BMS to identify N-deficient plots (CNCL) is affected by the irrigation system. The CNCL was lower under sprinkler irrigation (708 mg NO{sub 3}{sup -}–N/kg) than under flood irrigation (2205 mg NO{sub 3}{sup -}–N/kg), and the later presented a higher degree of uncertainty compared to sprinkler irrigated systems. The results showed the difficulty to identify the N-deficient plots with the BMS test and the higher sensibility of nitrate-N than total-N concentration in BMS to separate N-deficient from N-optimal plots. Under sprinkler irrigation, nitrate in BMS>1500 mg NO{sub 3}{sup -}–N/kg had a 85% probability of having received an excess of N. Considering economic net returns to N fertilization, the range of nitrate concentration in BMS that maximized profit under sprinkler-irrigated conditions was established between 1100 and 1700 mg NO3-–N/kg. Results suggest that BMS test can be useful in detecting plots with an excess of N but considering irrigation efficiency is crucial for stablishing successful CNC thresholds. (Author)

Weed flora, yield losses and weed control in cotton crop

OpenAIRE

Jabran, Khawar

2016-01-01

Cotton (Gossypium spp.) is the most important fiber crop of world and provides fiber, oil, and animals meals. Weeds interfere with the growth activities of cotton plants and compete with it for resources. All kinds of weeds (grasses, sedges, and broadleaves) have been noted to infest cotton crop. Weeds can cause more than 30% decrease in cotton productivity. Several methods are available for weed control in cotton. Cultural control carries significance for weed control up to a certain extent....

Gene expression in developing fibres of Upland cotton (Gossypium hirsutum L.) was massively altered by domestication.

Science.gov (United States)

Rapp, Ryan A; Haigler, Candace H; Flagel, Lex; Hovav, Ran H; Udall, Joshua A; Wendel, Jonathan F

2010-11-15

Understanding the evolutionary genetics of modern crop phenotypes has a dual relevance to evolutionary biology and crop improvement. Modern upland cotton (Gossypium hirsutum L.) was developed following thousands of years of artificial selection from a wild form, G. hirsutum var. yucatanense, which bears a shorter, sparser, layer of single-celled, ovular trichomes ('fibre'). In order to gain an insight into the nature of the developmental genetic transformations that accompanied domestication and crop improvement, we studied the transcriptomes of cotton fibres from wild and domesticated accessions over a developmental time course. Fibre cells were harvested between 2 and 25 days post-anthesis and encompassed the primary and secondary wall synthesis stages. Using amplified messenger RNA and a custom microarray platform designed to interrogate expression for 40,430 genes, we determined global patterns of expression during fibre development. The fibre transcriptome of domesticated cotton is far more dynamic than that of wild cotton, with over twice as many genes being differentially expressed during development (12,626 versus 5273). Remarkably, a total of 9465 genes were diagnosed as differentially expressed between wild and domesticated fibres when summed across five key developmental time points. Human selection during the initial domestication and subsequent crop improvement has resulted in a biased upregulation of components of the transcriptional network that are important for agronomically advanced fibre, especially in the early stages of development. About 15% of the differentially expressed genes in wild versus domesticated cotton fibre have no homology to the genes in databases. We show that artificial selection during crop domestication can radically alter the transcriptional developmental network of even a single-celled structure, affecting nearly a quarter of the genes in the genome. Gene expression during fibre development within accessions and expression

Increasing cotton stand establishment in soils prone to soil crusting

Science.gov (United States)

Many factors can contribute to poor cotton stand establishment, and cotton is notorious for its weak seedling vigor. Soil crusting can be a major factor hindering cotton seedling emergence in many of the cotton production regions of the US and the world. Crusting is mainly an issue in silty soils ...

7 CFR 28.107 - Original cotton standards and reserve sets.

Science.gov (United States)

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Original cotton standards and reserve sets. 28.107... Standards Act Practical Forms of Cotton Standards § 28.107 Original cotton standards and reserve sets. (a) The containers of the original Universal Standards and other official cotton standards of the United...

Cotton Production in Mali: Subsidies or Sustainable Development?

Science.gov (United States)

Moore, Lindsey

2007-01-01

Current trade rules concerning cotton subsidies are intricately linked with poverty and hunger in Mali. Over half of Mali's economy and over 30 million people depend directly on cotton. It is the main cash crop and the most important source of export revenue. Cotton also plays a key role in development policies and in the fight against poverty by…

Genomic studies for drought tolerance in cotton (abstract)

International Nuclear Information System (INIS)

Mahboob-ur-Rehman; Ullah, I.; Asir, M.; Zafar, Y.; Malik, K.A.

2005-01-01

The cotton germplasm developed in Pakistan has not been screened comprehensively for their response to water stress, which is a pre-requisite in exploring different metabolic pathways, development of genome maps, isolation of genes etc. The objectives of the study were to identify drought tolerant/sensitive cotton genotypes, development of genetic linkage maps, and to identify the most robust DNA markers leading towards marker-assisted selection (MAS). A field trial was conducted to investigate variation in gas exchange parameters and productivity traits in 32 cotton cultivars/promising strains under water stress environment and to ascertain association among these physiological and productivity traits. Photosynthetic rate (P), stomatal conductance (gs) and transpiration rate (E) were significantly reduced under water stress. Substantial genotypic variation for gas exchange parameters especially photosynthetic rate were observed with a significant association with productivity traits under water-limited environment elucidating its use as an indirect selection criterion for seed cotton yield. Moreover, the genotypes FH-901 and CIM-1100 were found the most sensitive and tolerant cultivars, respectively. Four hundred eighty random primers were surveyed on different cotton genotypes involved in population development programs. Out of these, 32 polymorphic primers were identified which are being converted into sequence characterized amplified regions (SCARs). Similarly, 25 out of 150 microstatellite loci (SSRs) were polymorphic among the cotton genotypes. Amplified fragment length polymorphism (AFLP) fingerprinting technique is being exploited to search for additional polymorphisms. The study will have impact on cotton breeding programme by reducing span to develop drought tolerant cotton varieties. (author)

Fate of tagged nitrogen fertilizer applied to irrigated corn

International Nuclear Information System (INIS)

Olson, R.V.

1980-01-01

A field experiment was conducted for 2 years with ammonium sulfate tagged with 5.93 at. % 15 N to determine the fate of N fertilizer applied to sprinkler-irrigated corn (Zea mays L.). All areas of triplicate, 356-cm square plots were treated with 50 or 150 kg tagged N/ha. N fertilizer used by the crop and that remaining in the top 240 cm of soil were measured. NH 4 + -N and NO 3 - -N in the 0- to 10-cm layers after the second harvest also were determined. Grain yields in 1976 did not differ significantly. In 1977 response to N was significant, but responses to two N rates did not differ significantly

Effect of different rates of irrigation on nitrogen use efficiency and sugarbeet yield

International Nuclear Information System (INIS)

Khalifa, Kh.; Sharanek, A.; Ashawwa, F.

1994-11-01

Field experiments were conducted separately during three seasons, autumn 1986/1987, spring 1988, and spring 1989, at ACSAD research station in Deir-Ezzor, under flood irrigation system, using two different variets of Sugarbeet, kawipoly in the first season and Kawi-Interpoly in the second and third season. All experiments recieved sililar rate of irrigation to keep the soil moisture contents at three levels offield capacity (85, 75 and 65%). Fertilizer treatment were in the first season 3 rates (0, 120, 240 Kg N/Ha) of ammonium nitrate fertilizer sup 1 sup 5 NH sub 4 sup 1 sup 5 NO sub 3 (double labeled), in the second season two single labeled sup 1 sup 5 NH sub 4 NO sub 3 and NU sub 4 sup 1 sup 5 NO sub 3 were used at two rates (0, 120 Kg N/ha), in the third season labeld urea CO(sup 1 sup 5 NH sub 2) sub 2 and ammonium sulfate (sup 1 sup 5 NH sub 4) sub 4 SO sub 4 fertilizers were used separatly at two rates (0, 120 Kg N/ha). The results showed that nitrogen use efficincy (NUE) varied with type, from, rate of N fertilizer, and rate of irrigation at different growth stages of crop and was in the range (4.5-81.83%). The yield of roots at harvest were segnificantly increased by irrigation and nitrogen fertilization in the first and second season , also I x N had significant interaction effect on yield. Yield of roots in the third season were only increased by nitrogen application with no effect irrigation. 21 refs., 18 tabs

Sustainable management after irrigation system transfer : experiences in Colombia - the RUT irrigation district

NARCIS (Netherlands)

Urrutia Cobo, N.

2006-01-01

Colombiais a tropical country located in South America. It has a total area of 114 million ha. In Colombia two irrigation sectors are distinguished: the small-scale irrigation and the large-scale irrigation sector. The small-scale irrigation sector is developed on lands

Profile of small interfering RNAs from cotton plants infected with the polerovirus Cotton leafroll dwarf virus

Directory of Open Access Journals (Sweden)

Schrago Carlos EG

2011-08-01

Full Text Available Abstract Background In response to infection, viral genomes are processed by Dicer-like (DCL ribonuclease proteins into viral small RNAs (vsRNAs of discrete sizes. vsRNAs are then used as guides for silencing the viral genome. The profile of vsRNAs produced during the infection process has been extensively studied for some groups of viruses. However, nothing is known about the vsRNAs produced during infections of members of the economically important family Luteoviridae, a group of phloem-restricted viruses. Here, we report the characterization of a population of vsRNAs from cotton plants infected with Cotton leafroll dwarf virus (CLRDV, a member of the genus Polerovirus, family Luteoviridae. Results Deep sequencing of small RNAs (sRNAs from leaves of CLRDV-infected cotton plants revealed that the vsRNAs were 21- to 24-nucleotides (nt long and that their sequences matched the viral genome, with higher frequencies of matches in the 3- region. There were equivalent amounts of sense and antisense vsRNAs, and the 22-nt class of small RNAs was predominant. During infection, cotton Dcl transcripts appeared to be up-regulated, while Dcl2 appeared to be down-regulated. Conclusions This is the first report on the profile of sRNAs in a plant infected with a virus from the family Luteoviridae. Our sequence data strongly suggest that virus-derived double-stranded RNA functions as one of the main precursors of vsRNAs. Judging by the profiled size classes, all cotton DCLs might be working to silence the virus. The possible causes for the unexpectedly high accumulation of 22-nt vsRNAs are discussed. CLRDV is the causal agent of Cotton blue disease, which occurs worldwide. Our results are an important contribution for understanding the molecular mechanisms involved in this and related diseases.

Profile of small interfering RNAs from cotton plants infected with the polerovirus Cotton leafroll dwarf virus.

Science.gov (United States)

Silva, Tatiane F; Romanel, Elisson A C; Andrade, Roberto R S; Farinelli, Laurent; Østerås, Magne; Deluen, Cécile; Corrêa, Régis L; Schrago, Carlos E G; Vaslin, Maite F S

2011-08-24

In response to infection, viral genomes are processed by Dicer-like (DCL) ribonuclease proteins into viral small RNAs (vsRNAs) of discrete sizes. vsRNAs are then used as guides for silencing the viral genome. The profile of vsRNAs produced during the infection process has been extensively studied for some groups of viruses. However, nothing is known about the vsRNAs produced during infections of members of the economically important family Luteoviridae, a group of phloem-restricted viruses. Here, we report the characterization of a population of vsRNAs from cotton plants infected with Cotton leafroll dwarf virus (CLRDV), a member of the genus Polerovirus, family Luteoviridae. Deep sequencing of small RNAs (sRNAs) from leaves of CLRDV-infected cotton plants revealed that the vsRNAs were 21- to 24-nucleotides (nt) long and that their sequences matched the viral genome, with higher frequencies of matches in the 3- region. There were equivalent amounts of sense and antisense vsRNAs, and the 22-nt class of small RNAs was predominant. During infection, cotton Dcl transcripts appeared to be up-regulated, while Dcl2 appeared to be down-regulated. This is the first report on the profile of sRNAs in a plant infected with a virus from the family Luteoviridae. Our sequence data strongly suggest that virus-derived double-stranded RNA functions as one of the main precursors of vsRNAs. Judging by the profiled size classes, all cotton DCLs might be working to silence the virus. The possible causes for the unexpectedly high accumulation of 22-nt vsRNAs are discussed. CLRDV is the causal agent of Cotton blue disease, which occurs worldwide. Our results are an important contribution for understanding the molecular mechanisms involved in this and related diseases.

Influence of irrigation on wheat crop Influência da irrigação na cultura do trigo

Directory of Open Access Journals (Sweden)

Danilton L. Flumignan

2013-02-01

Full Text Available The use of irrigation has been increased significantly in wheat crops in Brazil. This study aims to evaluate the effect of irrigation on the productivity, on flour technological quality and on the wheat root system. In a field experiment conducted at IAPAR, in Londrina -state of Paraná (PR, Brazil, the IPR 118 cultivar was grown under sprinkler irrigation (Irrigated Treatment and without irrigation (Non-irrigated Treatment. The productivity was determined by harvesting three samples of 25 m² per treatment. The same samples were used to evaluate the flour technological quality, considering, among other parameters, gluten strength (W. The evaluation of the root system was performed after the harvest, considering a profile of 0 to 45 cm of soil depth, and sampling eight plants per treatment. The profile wall method was used to determine the roots number (RN and the monolith method to determine the root dry mass (RDM. Irrigation increased wheat productivity in three times, while W was reduced in the flour. Nevertheless, the value of W found in the Irrigated Treatment (249 10-4 J was sufficient to keep wheat classification as bread type, the same as IPR 118 cultivar is classified. The measured values of RN and RDM were similar or higher for the Non-irrigated Treatment.O uso da irrigação na triticultura tem aumentado significativamente nos últimos anos no Brasil. Neste trabalho, objetivou-se avaliar a influência da irrigação na produtividade, na qualidade tecnológica da farinha e no sistema radicular do trigo. Em experimento de campo no IAPAR, em Londrina, Paraná, a cultivar IPR 118 foi cultivada sob irrigação por aspersão convencional (Tratamento Irrigado e sem irrigação (Tratamento Sequeiro. A produtividade foi determinada, colhendo-se três amostras de 25 m² por tratamento. Nestas mesmas amostras, procedeu-se à análise da qualidade tecnológica da farinha, sendo avaliada, entre outros parâmetros, a força de glúten (W. A avalia

Cotton contamination

CSIR Research Space (South Africa)

Van der Sluijs, MHJ

2018-05-01

Full Text Available This review focusses on physical forms of contaminant including the presence, prevention and/or removal of foreign bodies, stickiness and seed-coat fragments rather than the type and quantity of chemical residues that might be present in cotton...

Impacts of Irrigation Practices on Groundwater Recharge in Mississippi Delta Using coupled SWAT-MODFLOW Model

Science.gov (United States)

Gao, F.; Feng, G.; Han, M.; Jenkins, J.; Ouyang, Y.

2017-12-01

The Lower Mississippi River alluvial plain (refers to as MS Delta), located in the northwest state of Mississippi, is one of the most productive agricultural region in the U.S. The primary crops grown in this region are soybean, corn, cotton, and rice. Approximately 80% water from the alluvial aquifer in MS Delta are withdrawn for irrigation, which makes it the most used aquifer in the State. As a result, groundwater level has declined > 6 m since 1970, which threaten the sustainability of irrigated agriculture in this region. The objectives of this study were to: 1) couple the SWAT and MODFLOW then calibrate and validate the incorporated model outputs for stream flow, groundwater level and evapotranspiration (ET) in MS Delta; 2) simulate the groundwater recharge as affected by a) conventional irrigation scheme, b) no irrigation scheme, c) ET based and soil moisture based full irrigation schedules using all groundwater, and d) ET and soil moisture based full irrigation schedule using different percentages of surface and ground water. Results indicated that the coupled model performed well during the calibration and validation for daily stream flow at three USGS gauge stations. (R2=0.7; Nash-Sutcliffe efficiency (NSE) varied from 0.6 to 0.7; Root Mean Square Error (RMSE) ranged from 20 to 27 m3/s). The values of determination coefficient R2 for groundwater level were 0.95 for calibration and 0.88 for validation, their NSE values were 0.99 and 0.93, respectively. The values of RMSE for groundwater level during the calibration and validation period were 0.51 and 0.59 m. The values of R2, NSE and RMSE between SWAT-MODFLOW simulated actual evapotranspiration (ET) and remote sensing evapotranspiration (ET) were 0.52, 0.51 and 28.1 mm. The simulated total average monthly groundwater recharge had lower values of 19 mm/month in the crop season than 30 mm/month in the crop off-growing season. The SWAT-MODFLOW can be a useful tool for not only simulating the recharge in MS

Minimization of operational impacts on spectrophotometer color measurements for cotton

Science.gov (United States)

A key cotton quality and processing property that is gaining increasing importance is the color of the cotton. Cotton fiber in the U.S. is classified for color using the Uster® High Volume Instrument (HVI), using the parameters Rd and +b. Rd and +b are specific to cotton fiber and are not typical ...

Transgenic Cotton Plants Expressing the HaHR3 Gene Conferred Enhanced Resistance to Helicoverpa armigera and Improved Cotton Yield.

Science.gov (United States)

Han, Qiang; Wang, Zhenzhen; He, Yunxin; Xiong, Yehui; Lv, Shun; Li, Shupeng; Zhang, Zhigang; Qiu, Dewen; Zeng, Hongmei

2017-08-30

RNA interference (RNAi) has been developed as an efficient technology. RNAi insect-resistant transgenic plants expressing double-stranded RNA (dsRNA) that is ingested into insects to silence target genes can affect the viability of these pests or even lead to their death. HaHR3 , a molt-regulating transcription factor gene, was previously selected as a target expressed in bacteria and tobacco plants to control Helicoverpa armigera by RNAi technology. In this work, we selected the dsRNA- HaHR3 fragment to silence HaHR3 in cotton bollworm for plant mediated-RNAi research. A total of 19 transgenic cotton lines expressing HaHR3 were successfully cultivated, and seven generated lines were used to perform feeding bioassays. Transgenic cotton plants expressing ds HaHR3 were shown to induce high larval mortality and deformities of pupation and adult eclosion when used to feed the newly hatched larvae, and 3rd and 5th instar larvae of H. armigera . Moreover, HaHR3 transgenic cotton also demonstrated an improved cotton yield when compared with controls.

The cotton mealybug, Phenacoccus solenopsis Tinsley (Hemiptera: Pseudococcidae as a new menace to cotton in Egypt and its chemical control

Directory of Open Access Journals (Sweden)

El-Zahi El-Zahi Saber

2016-04-01

Full Text Available The cotton mealybug, Phenacoccus solenopsis Tinsley (Hemiptera: Pseudococcidae is a polyphagous sap sucking insect with a wide geographical and host range causing severe losses in economically important crops. This study represents the first record of P. solenopsis as a new insect attacking cotton plants (Gossypium barbadense var. Giza 86 in Kafr El-Sheikh governorate, Egypt. The insect was noticed on cotton plants for the first time during its growing season of 2014. The mealybug specimens were collected from infested cotton plants and identified as P. solenopsis. In an attempt to control this pest, eight toxic materials viz., imidacloprid, thiamethoxam, flonicamid, emamectin-benzoate, chlorpyrifos, methomyl, deltamethrin and mineral oil (KZ-oil, belonging to different chemical groups, were tested for their influence against P. solenopsis on cotton under field conditions. Methomyl, imidacloprid, thiamethoxam and chlorpyrifos showed the highest efficacy against P. solenopsis recording 92.3 to 80.4% reduction of the insect population. Flonicamid, emamectin-benzoate and KZ-oil failed to exhibit sufficient P. solenopsis control.

Genetic diversity in upland cotton for cotton leaf curl virus disease, earliness and fiber quality

International Nuclear Information System (INIS)

Saeed, F.; Farooq, J.; Mahmood, A.; Hussain, T.

2014-01-01

In Pakistan during last two decades the major factor limiting cotton production is cotton leaf curl virus disease (CLCuD). For estimation of genetic diversity regarding CLCuD tolerance, fiber quality and some yield contributing traits, 101 cotton genotypes imported from USA were evaluated. Different statistical procedures like cluster, principle components (PC) and correlation analysis were employed to identify the suitable genotypes that can be further exploited in breeding programme. Significant associations were found between yield contributing trait, boll weight and fiber related trait, staple length. Earliness related traits, like days taken to 1 square and days taken to 1 flower had positive correlation with each other and both these traits also showed their positive association with ginning out turn. The negative significant correlation of CLCuD was obtained with monopodial branches, sympodial branches and plant height. Principal component (PC) analysis showed first five PCs having eigen value >1 explaining 67.8% of the total variation with days to st 1 square and flowering along with plant height and sympodia plant which were being the most important characters in PC1. Cluster analysis classified 101 accessions into five divergent groups. The genotypes in st cluster 1 only showed reasonable values for days to 1 square and flower, sympodia per plant, ginning out turn, staple length and fiber fineness and the genotypes in cluster 5 showed promising values for the traits like cotton leaf curl virus, ginning out turn and fiber fineness. The genotypes in cluster 1 and 5 may be combined to obtain desirable traits related to earliness and better disease tolerance. Scatter plot and tree diagrams demonstrated sufficient diversity among the cotton accessions for various traits and some extent of association between various clusters. It is concluded that diversity among the genotypes could be utilized for the development of CLCuD resistant lines with increased seed

Response of cotton genotypes to boron under-b-adequate conditions

International Nuclear Information System (INIS)

Shah, J. A.; Sial, M. A.; Hassan, Z. U.; Rajpar, I.

2015-01-01

Balanced boron (B) application is well-known to enhance the cotton production; however, the narrow range between B-deficiency and toxicity levels makes it difficult to manage. Cotton genotypes extensively differ in their response to B requirements. The adequate dose of B for one genotype may be insufficient or even toxic to other genotype. The effects of boron (B) on seed cotton yield and its various yield associated traits were studied on 10 cotton genotypes of Pakistan. The pot studies were undertaken to categorize cotton genotypes using B-deficient (control) and B-adequate (2.0 kg B ha-1) levels arranged in CRD with four repeats. The results indicated that the seed cotton yield, yield attributes and B-uptake of genotypes were comparatively decreased in B-deficient stressed treatment. Genotype NIA-Ufaq exhibited wide range of adaptation and ranked as efficient-responsive, as it produced higher seed cotton yield under both B-regimes. SAU-2 and CIM-506 were highly-efficient and remaining all genotypes were medium-efficient. Genotype Sindh-1 produced low seed cotton yield under B deficient condition and ranked as low-efficient. B-efficient cotton genotypes can be grown in B deficient soils without B application. (author)

Effect of inorganic fertilizers and municipal solid waste manure on some soil physical properties in cotton-wheat cropping system

International Nuclear Information System (INIS)

Qazi, A. M.; Akram, M.; Ahmad, A.

2006-01-01

A field experiment was conducted on a sandy loam soil for three consecutive years (2002-2005) to study the effects of combined use of chemical fertilizers (NPK) and organic manure (municipal solid waste manure-MSWM) on soil organic matter, bulk density, porosity, penetration resistance, and yields of crops in cotton (Desi)-wheat cropping system. After three years, organic matter content of the surface (0-15 cm) soil increased (42-68%)to 7.1-8.4 g kg from an initial level of 5.0 g kg with out any significant interaction between two fertilizer doses, three management techniques and six seasons except for dose x season interaction where higher organic matter contents were found after each cotton harvest by site-specific fertilizer application. In general, the bulk density of the surface soil increased un-impressively with the time by unique use of fertilizers and decreased gradually by application of integrated plant nutrients management (IPNM) technique using MSWM with or without pesticides/herbicides use. Porosity of soil increased (2.5 %) by applying IPNM technique compared to unique use of chemical fertilizers. Penetration resistance was increased with unique use of fertilizers to a level of 0.80 M Pa from initial value of 0.74 MPa. Presumably due to higher intrinsic bulk density of the soil. Over the three years, on an average, the MSW manured and fertilized plots (IPNM with pesticides/herbicides use ) produced higher i.e. 2% and 11% increase in seed cotton and wheat grain yields respectively than did the plots receiving chemical fertilizers. Neglecting herbicides/pesticides application decreased (4-5%) seed cotton yield. (author)

Insecticide use and practices among cotton farmers in northern ...

African Journals Online (AJOL)

Cotton (Gossypium hirsutum L.) is an important cash crop in Uganda. Insecticide application practices among cotton growers in northern Uganda were examined to determine the pests targeted and the compliance of control measures with the standards recommended by the Uganda's Cotton Development Organization ...

78 FR 68983 - Cotton Futures Classification: Optional Classification Procedure

Science.gov (United States)

2013-11-18

...-AD33 Cotton Futures Classification: Optional Classification Procedure AGENCY: Agricultural Marketing... regulations to allow for the addition of an optional cotton futures classification procedure--identified and... response to requests from the U.S. cotton industry and ICE, AMS will offer a futures classification option...

MicroRNA expression profiling during upland cotton gland forming ...

African Journals Online (AJOL)

Jane

2011-08-15

Aug 15, 2011 ... 2Key Laboratory of Cotton Genetic Improvement, Cotton Research Institute of the Chinese Academy of Agricultural. Sciences, Ministry of ... terpenoid aldehyde biosynthesis pathway, genetic engineering and molecular breeding of cotton. ... toxic to non-ruminant animals and humans, which means that large ...

Evaluating potassium-use-efficiency of five cotton genotypes of pakistan

International Nuclear Information System (INIS)

Hassan, Z.U.; Kubar, K.A.

2014-01-01

Potassium (K) deficiency in Pakistani soils has been recently reported as the major limiting factor affecting sustainable cotton production. The present study was conducted to envisage how K nutrition affect the growth, biomass production, yield and K-use-efficiency of five cotton genotypes, NIBGE-3701, NIBGE-1524 (Bt-transgenic), Sadori, Sindh-1 and SAU-2 (non-Bt conventional), commonly grown in Pakistan. All five genotypes were raised at deficient and adequate K levels, i.e. 0 and 60 kg K/sub 2/O ha-1, respectively. The experiment was performed in plastic pots following a completely randomized factorial design with three repeats. Adequate K nutrition significantly increased various plant growth traits and yield of all cotton genotypes under study, viz. number of sympodia (21%), number of leaves (34%), leaf dry biomass (30%), shoot dry biomass (31%), number of bolls (50%) and yield of seed cotton (92%). Substantial variations were observed among cotton genotypes for their K-use-efficiency and K-response-efficiency. Sadori and SAU-2 were screened as most K-use-efficient cotton genotypes, while Sindh-1 and SAU-2 were ranked as the most K-responsive cotton genotypes. Interestingly, Sadori did not respond to K nutrition. Moreover, Bt cotton genotypes accumulated more K as compared to non-Bt genotypes. The cotton genotype SAU-2 was identified as efficient-response genotype for better adaptation for both low- and high-K-input sustainable cotton agriculture systems. (author)

Irrigation Training Manual. Planning, Design, Operation, and Management of Small-Scale Irrigation Systems [and] Irrigation Reference Manual. A Technical Reference to Be Used with the Peace Corps Irrigation Training Manual T0076 in the Selection, Planning, Design, Operation, and Management of Small-Scale Irrigation Systems.

Science.gov (United States)

Salazar, LeRoy; And Others

This resource for trainers involved in irrigated agriculture training for Peace Corps volunteers consists of two parts: irrigation training manual and irrigation reference manual. The complete course should fully prepare volunteers serving as irrigation, specialists to plan, implement, evaluate and manage small-scale irrigation projects in arid,…

Producing Organic Cotton: A Toolkit - Crop Guide, Projekt guide, Extension tools

OpenAIRE

Eyhorn, Frank

2005-01-01

The CD compiles the following extension tools on organic cotton: Organic Cotton Crop Guide, Organic Cotton Training Manual, Soil Fertility Training Manual, Organic Cotton Project Guide, Record keeping tools, Video "Organic agriculture in the Nimar region", Photos for illustration.

A facile method to fabricate superhydrophobic cotton fabrics

Science.gov (United States)

Zhang, Ming; Wang, Shuliang; Wang, Chengyu; Li, Jian

2012-11-01

A facile and novel method for fabricating superhydrophobic cotton fabrics is described in the present work. The superhydrophobic surface has been prepared by utilizing cationic poly (dimethyldiallylammonium chloride) and silica particles together with subsequent modification of (heptadecafluoro-1,1,2,2-tetradecyl) trimethoxysilane. The size distribution of silica particles was measured by Particle Size Analyzer. The cotton textiles before and after treatment were characterized by using scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS). The wetting behavior of cotton samples was investigated by water contact angle measurement. Moreover, the superhydrophobic durability of coated cotton textiles has been evaluated by exposure, immersion and washing tests. The results show that the treated cotton fabrics exhibited excellent chemical stability and outstanding non-wettability with the WCA of 155 ± 2°, which offers an opportunity to accelerate the large-scale production of superhydrophobic textiles materials for new industrial applications.

Milkweed, stink bugs, and Georgia cotton

Science.gov (United States)

In peanut-cotton farmscapes in Georgia, stink bugs, i.e., Nezara viridula (L.)(Say) and Chinavia hilaris (Say), develop in peanut and then disperse at the crop-to-crop interface to feed on fruit in cotton. The main objective of this study was to examine the influence of a habitat of tropical milkwe...

Fabrication of cotton fabric with superhydrophobicity and flame retardancy.

Science.gov (United States)

Zhang, Ming; Wang, Chengyu

2013-07-25

A simple and facile method for fabricating the cotton fabric with superhydrophobicity and flame retardancy is described in the present work. The cotton fabric with the maximal WCA of 160° has been prepared by the covalent deposition of amino-silica nanospheres and the further graft with (heptadecafluoro-1,1,2,2-tetradecyl) trimethoxysilane. The geometric microstructure of silica spheres was measured by transmission electron microscopy (TEM). The cotton textiles before and after treatment were characterized by using scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS). The wetting behavior of cotton samples was investigated by water contact angle measurement. Moreover, diverse performances of superhydrophobic cotton textiles have been evaluated as well. The results exhibited the outstanding superhydrophobicity, excellent waterproofing durability and flame retardancy of the cotton fabric after treatment, offering a good opportunity to accelerate the large-scale production of superhydrophobic textiles materials for new industrial applications. Copyright © 2013 Elsevier Ltd. All rights reserved.

Integrated Modeling of Crop Growth and Water Resource Management to Project Climate Change Impacts on Crop Production and Irrigation Water Supply and Demand in African Nations

Science.gov (United States)

Dale, A. L.; Boehlert, B.; Reisenauer, M.; Strzepek, K. M.; Solomon, S.

2017-12-01

Climate change poses substantial risks to African agriculture. These risks are exacerbated by concurrent risks to water resources, with water demand for irrigation comprising 80 to 90% of water withdrawals across the continent. Process-based crop growth models are able to estimate both crop demand for irrigation water and crop yields, and are therefore well-suited to analyses of climate change impacts at the food-water nexus. Unfortunately, impact assessments based on these models generally focus on either yields or water demand, rarely both. For this work, we coupled a crop model to a water resource management model in order to predict national trends in the impact of climate change on crop production, irrigation water demand, and the availability of water for irrigation across Africa. The crop model FAO AquaCrop-OS was run at 2ox2o resolution for 17 different climate futures from the CMIP5 archive, nine for Representative Concentration Pathway (RCP) 4.5 and eight for RCP8.5. Percent changes in annual rainfed and irrigated crop production and temporal shifts in monthly irrigation water demand were estimated for the years 2030, 2050, 2070, and 2090 for maize, sorghum, rice, wheat, cotton, sugarcane, fruits & vegetables, roots & tubers, and legumes & soybeans. AquaCrop was then coupled to a water management model (WEAP) in order to project changes in the ability of seven major river basins (the Congo, Niger, Nile, Senegal, Upper Orange, Volta, and Zambezi) to meet irrigation water demand out to 2050 in both average and dry years in the face of both climate change and irrigation expansion. Spatial and temporal trends were identified and interpreted through the lens of potential risk management strategies. Uncertainty in model estimates is reported and discussed.