Internal irradiation for cystic craniopharyngioma

International Nuclear Information System (INIS)

Kobayashi, T.; Kageyama, N.; Ohara, K.

1981-01-01

The authors report the results of internal irradiation with labeled chromic phosphate (32P) and gold-198 (198Au) colloid in eight cases of cystic craniopharyngiomas. They used a newly developed dosimetric formula, by which the radiation dose at the cyst wall and at any point far from the radioactive source can be calculated. Ten courses of irradiation in eight patients were carried out by injection of either 32P or 198Au colloid into the cyst through an Ommaya drainage system that had been placed at craniotomy. Follow-up studies ranging from 13 to 156 months revealed that all cysts were effectively treated, with elimination of fluid or collapse of the cyst. This was confirmed by Conray cystography and/or computerized tomography. Not only the dose delivered to the wall but also the thickness of the cyst wall and the location of the cyst are important factors in planning internal irradiation. A safe and adequate dose to the cyst wall could range between 9000 to 30,000 rads for craniopharyngioma. This treatment is suitable for large cysts that are thought to be difficult to remove radically, recurrent cysts resistant to previous treatment, or multiple cysts. Internal irradiation may also be applicable in other cystic intracranial tumors if dosimetry is calculated accurately

Progress towards a new Canadian irradiation-research facility

International Nuclear Information System (INIS)

Lee, A.G.; Lidstone, R.F.

1993-01-01

As reported at the second meeting of the International Group on Research Reactors, Atomic Energy of Canada Limited (AECL) is evaluating its options for future irradiation facilities. During the past year significant progress has been made towards achieving consensus on the irradiation requirements for AECL's major research programs and interpreting those requirements in terms of desirable characteristics for experimental facilities in a research reactor. The next stage of the study involves identifying near-term and long-term options for irradiation-research facilities to meet the requirements. The near-term options include assessing the availability of the NRU reactor and the capabilities of existing research reactors. The long-term options include developing a new irradiation-research facility by adapting the technology base for the MAPLE-X10 reactor design. Because materials testing in support of CANDU power reactors dominates AECL's irradiation requirements, the new reactor concept is called the MAPLE Materials Testing Reactor (MAPLE-MTR). Parametric physics and engineering studies are in progress on alternative MAPLE-MTR configurations to assess the capabilities for the following types of test facilities: - fast-neutron sites, that accommodate materials-irradiation assemblies, - small-diameter vertical fuel test loops that accommodate multielement assemblies, - large-diameter vertical fuel test loops, each able to hold one or more CANDU fuel bundles, - horizontal test loops, each able to hold full-size CANDU fuel bundles or small-diameter multi-element assemblies, and - horizontal beam tubes

Laboratory research irradiators with enhanced security features

International Nuclear Information System (INIS)

Srivastava, Piyush

2016-01-01

Over the years BRIT has developed state of art technology for laboratory research irradiators which are suited most for carrying out research and development works in the fields of radiation processing. These equipment which house radioactive sources up to 14 kCi are having a number of features to meet users requirements. They are manufactured as per the national and International standards of safety codes. The paper deals with design, development and application aspects of laboratory research irradiator called Gamma Chamber and also the new security features planned for incorporation in the equipment. Equipment are being regularly manufactured, supplied and installed by BRIT in India and Abroad. There is a number of such equipment in use at different institutions and are found to be very useful. (author)

Laboratory research irradiators with enhanced security features

International Nuclear Information System (INIS)

Srivastava, Piyush

2014-01-01

Over the years BRIT has developed state of art technology for laboratory research irradiators which are suited most for carrying out research and development works in the fields of radiation processing. These equipment which house radioactive sources up to 14 kCi are having a number of features to meet users requirements. They are manufactured as per the national and International standards of safety codes. The paper deals with design, development and application aspects of laboratory research irradiator called Gamma Chamber and also the new security features planned for incorporation in the equipment. Equipment are being regularly manufactured, supplied and installed by BRIT in India and Abroad. There are a number of such equipment in use at different institutions and are found to be very useful. (author)

Food Preservation by Irradiation. Vol. II. Proceedings of an International Symposium on Food Preservation by Irradiation

International Nuclear Information System (INIS)

1978-01-01

In the task of alleviating the distress caused by the world-wide food shortage it is essential to preserve what has been grown and harvested in the fields. Clearly all suitable methods for preserving agricultural produce and food should be made use of. In this context treatment with ionizing radiation has proved its value as an environmentally clean, physical method of food preservation which is low in its energy requirement, but the volume of food being processed in this way is still low. The introduction of food irradiation on a global basis poses certain economic, legal, regulatory and health-related questions, the solution of which requires close international collaboration. Such collaboration between many international, intergovernmental and national organizations began over a decade ago. The need for dissemination and discussion of information gained through research and development work on this subject became apparent, and a number of inter-regional meetings were held. The last international symposium on the topic was held jointly by FAO and the IAEA in 1972 in Bombay. To review progress made since then, FAO and the IAEA, together with WHO, convened the present Symposium on 21-25 November 1977. It appeared timely to hold this Symposium for the following reasons: (1) Apart from significant scientific work reported in the literature, progress in other directions between 1972 and 1977 had also been made. For example, the number of food items authorized by governments, with or without restriction, had grown from 19 to 26, and the number of countries accepting one or more irradiated foods for human consumption had increased from 11 to 19. (2) Largely on the basis of the work of the International Project in the Field of Food Irradiation (Karlsruhe), already described at the Bombay Symposium, an international expert committee, jointly convened by FAO, the IAEA and WHO in August-September 1976, had made important statements on the philosophy of wholesomeness studies

Food Preservation by Irradiation. Vol. I. Proceedings of an International Symposium on Food Preservation by Irradiation

International Nuclear Information System (INIS)

1978-01-01

In the task of alleviating the distress caused by the world-wide food shortage it is essential to preserve what has been grown and harvested in the fields. Clearly all suitable methods for preserving agricultural produce and food should be made use of. In this context treatment with ionizing radiation has proved its value as an environmentally clean, physical method o f food preservation which is low in its energy requirement, but the volume of food being processed in this way is still low. The introduction o f food irradiation on a global basis poses certain economic, legal, regulatory and health-related questions, the solution o f which requires close international collaboration. Such collaboration between many international, intergovernmental and national organizations began over a decade ago. The need for dissemination and discussion o f information gained through research and development work on this subject became apparent, and a number of inter-regional meetings were held. The last international symposium on the topic was held jointly by FAO and the IAEA in 1972 in Bombay. To review progress made since then, FAO and the IAEA, together with WHO, convened the present Symposium on 21-25 November 1977. It appeared timely to hold this Symposium for the following reasons: (1) Apart from significant scientific work reported in the literature, progress in other directions between 1972 and 1977 had also been made. For example, the number of food items authorized by governments, with or without restriction, had grown from 19 to 26, and the number of countries accepting one or more irradiated foods for human consumption had increased from 11 to 19. (2) Largely on the basis of the work of the International Project in the Field of Food Irradiation (Karlsruhe), already described at the Bombay Symposium, an international expert committee, jointly convened by FAO, the IAEA and WHO in August-September 1976, had made important statements on the philosophy of wholesomeness

Internal irradiation for cystic craniopharyngioma

International Nuclear Information System (INIS)

Kobayashi, Tatsuya; Kageyama, Naoki

1979-01-01

Internal irradiation with P-32 chromic phosphate and Au-198 colloid was used to treat cystic craniopharyngioma. A newly developed dosimetric formula, by which the radiation dose can be calculated simultaneously at the cyst wall and at a point far from the radioactive source and the untoward effect of irradiation on surrounding brain tissue can be eliminated, especially in cases in which the wall is thin and can be penetrated by beta emission, was used. Radioactive phosphate or gold was injected into eight craniopharyngioma cysts throught the Ommaya reservoir and a tube inserted at the first craniotomy. All cysts were effectively treated for 3 to 33 months, to eliminate fluid retention or collapse. A collapsed cyst was removed at the second craniotomy and irradiation was histologically shown to be effective. Oculomotor palsy, a side effect of irradiation, occurred 10 days after the injection of 5 mc of P-32 chromic phosphate only in a case of small cysts (5.0 ml) in the supra- and intracellular regions. The thickness of the cyst wall was less than 0.5 mm and the oculomotor nerves were thought to adhere to the wall. Not only the amount of wall dose but also the thickness of the wall and localization of the cyst are important factors in internal irradiation. Sufficient and safer doses which kill tumor cells in the wall and have no side effects, are 9,000 to 30,000 rad. Internal irradiation can be used to treat large cysts of more than 10 ml which are supposedly difficult to remove radically and or multiple cysts. It is effective not only for cystic craniopharyngioma but also for intracrania cystic tumors other than craniopharyngioma, if dosimetry is accurate. (J.P.N.)

New pallet irradiator for Gammaster International

International Nuclear Information System (INIS)

Moehlmann, J.H.F.

1993-01-01

State of the art technology offers many opportunities to improve production processes with ionizing radiation. Internal and external audits, in particular by regulatory bodies such as the FDA and DHSS/MCA, are necessary and commonplace requirements when operating in the healthcare and pharmaceutical sectors. Efficiency is a major requirement for industry and also for our radiation business. With all the above mentioned items in mind, Gammaster International B.V. has developed and built a new type Pallet Irradiator. For this irradiator Gammaster International designed and built a new process console, incorporating state of the art technology. (author)

Mitigating IASCC of Reactor Core Internals by Post-Irradiation Annealing

International Nuclear Information System (INIS)

Was, Gary

2017-01-01

This final report summarizes research performed during the period between September 2012 and December 2016, with the objective of establishing the effectiveness of post-irradiation annealing (PIA) as an advanced mitigation strategy for irradiation-assisted stress corrosion cracking (IASCC). This was completed by using irradiated 304SS control blade material to conduct crack initiation and crack growth rate (CGR) experiments in simulated BWR environment. The mechanism by which PIA affects IASCC susceptibility will also be verified. The success of this project will provide a foundation for the use of PIA as a mitigation strategy for core internal components in commercial reactors.

Mitigating IASCC of Reactor Core Internals by Post-Irradiation Annealing

Energy Technology Data Exchange (ETDEWEB)

Was, Gary [Univ. of Michigan, Ann Arbor, MI (United States)

2017-06-02

This final report summarizes research performed during the period between September 2012 and December 2016, with the objective of establishing the effectiveness of post-irradiation annealing (PIA) as an advanced mitigation strategy for irradiation-assisted stress corrosion cracking (IASCC). This was completed by using irradiated 304SS control blade material to conduct crack initiation and crack growth rate (CGR) experiments in simulated BWR environment. The mechanism by which PIA affects IASCC susceptibility will also be verified. The success of this project will provide a foundation for the use of PIA as a mitigation strategy for core internal components in commercial reactors.

Internal friction in irradiated textolite

International Nuclear Information System (INIS)

Zajkin, Yu.A.; Kozhamkulov, B.A.; Koztaeva, U.P.

1996-01-01

Structural relaxation in irradiated textolite of ST and ST-EhTF trade marks presenting pressed material got by method of impregnation of fibreglass by phenole and epoxytriphenole binders relatively. Measuring of temperature dependences of internal friction (TDIF) is carried out in torsional pendulum at oscillation frequency 0.6-1.0 Hz before and after irradiation by stopped gamma-quanta with energy 3 MeV on electron accelerator EhLU-4. α and β peaks, related with segments motion in base and side chains of macromolecular have being observed on TDIF of all textolite. Growth of peaks height after irradiation evident about increase of segments mobility in base chain and about de-freezing of segments in side chains and it could be considered as qualitative measure of radiation destruction rate. Comparison of temperature dependences of internal friction indicates on higher radiation stability of textolite of ST-EhTF trade mark

International status of food irradiation

International Nuclear Information System (INIS)

Roberts, P.B.

1982-09-01

Recent international moves that are likely to result in an increasing acceptance of irradiated foods are reviewed. Particular attention is given to the activities of the FAO, WHO, Codex Alimentarius and to attitudes in the United States and the Asian-Pacific region. In 1979, the Codex Alimentarius Commission adopted a Recommended General Standard for Irradiated Food. A resume is given of a revised version of the standard that is presently under consideration. However, remaining barriers to trade in irradiated food are briefly discussed, such as legal and regulatory problems, labelling, public acceptance and economic viability

Food irradiation receives international acceptance

Energy Technology Data Exchange (ETDEWEB)

Beddoes, J M [Atomic Energy of Canada Ltd., Ottawa, Ontario. Commercial Products

1982-04-01

Irradiation has advantages as a method of preserving food, especially in the Third World. The author tabulates some examples of actual use of food irradiation with dates and tonnages, and tells the story of the gradual acceptance of food irradiation by the World Health Organization, other international bodies, and the U.S. Food and Drug Administration (USFDA). At present, the joint IAEA/FAO/WHO standard permits an energy level of up to 5 MeV for gamma rays, well above the 1.3 MeV energy level of /sup 60/Co. The USFDA permits irradiation of any food up to 10 krad, and minor constituents of a diet may be irradiated up to 5 Mrad. The final hurdle to be cleared, that of economic acceptance, depends on convincing the food processing industry that the process is technically and economically efficient.

New pallet irradiation for Gammaster International

Science.gov (United States)

Möhlmann, Mr. J. H. F.

1993-07-01

State of the art technology offers many opportunities to improve production process with ionizing radiation. Also the requirements to this process become more and more stringent; who was aware of the ISO-9000 Standards? Now it is a necessary concept? Internal and external audits, in particular by Regulatory Bodies such as the FDA and DHSS/MCA, are necessary and commonplace requirements when operating in the Healthcare and Pharmaceutical sectors. Efficiency is a major requirement for industry and also for our radiation business. With all the above mentioned items in mind, Gammaster International B.V. in close cooperation with Nordion International Inc. has developed and built a new type Pallet Irradiator. In this new concept, our 22 years experience in gamma processing and the expertise gained in 10 years of operation of pallet irradiators was incorporated. For this irradiator Gammaster International designed and built a new process control console, incorporating state of the art technology such as: - A well-balanced safety system - A control panel, with status indication for all essential operating and safety parameters - Advances warning for necessary maintenance work - Automatic timer-setting control in addition to an automatic timer setting modification - Clear indication of the position of the product inside the unit and its status - Fully automatic product information generated when the product leaves the irradiation unit - Visual process control with the help of a color monitor - Incremental dose-control - Fault identification

Radioresistance and immunization effectiveness under internal irradiation

International Nuclear Information System (INIS)

Kal'nitskij, S.A.

1978-01-01

The effect of preliminary immunization on the radioresistance of mice to internal irradiation from incorporated 137 Cs or 90 Sr was studied, and it was found that a preliminary single immunization with bacterial vaccines had a favorable effect on the outcome of radiation injury. The present results suggested that vaccination had a very pronounced radioprotective effect and so may be used as a means of biologic protection from internal irradiation

Materials irradiation research in neutron science

Energy Technology Data Exchange (ETDEWEB)

Noda, Kenji; Oyama, Yukio [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

1997-11-01

Materials irradiation researches are planned in Neutron Science Research Program. A materials irradiation facility has been conceived as one of facilities in the concept of Neutron Science Research Center at JAERI. The neutron irradiation field of the facility is characterized by high flux of spallation neutrons with very wide energy range up to several hundred MeV, good accessibility to the irradiation field, good controllability of irradiation conditions, etc. Extensive use of such a materials irradiation facility is expected for fundamental materials irradiation researches and R and D of nuclear energy systems such as accelerator-driven incineration plant for long-lifetime nuclear waste. In this paper, outline concept of the materials irradiation facility, characteristics of the irradiation field, preliminary technical evaluation of target to generate spallation neutrons, and materials researches expected for Neutron Science Research program are described. (author)

International standards and agreements in food irradiation

International Nuclear Information System (INIS)

Cetinkaya, N.

2004-01-01

The economies of both developed and developing countries have been effected by their exported food and agricultural products. Trading policies of food and agricultural products are governed by international agreement as well as national regulations. Trade in food and agricultural commodities may be affected by both principal Agreements within the overall World Trade Organization (WTO) Agreement, though neither specifically refers to irradiation or irradiated foods. The principal Agreements are the Technical Barriers to Trade (TBT) Agreement and the Sanitary and Phyto sanitary (SPS) Agreement. The SPS of the WTO requires governments to harmonize their sanitary and phyto sanitary measures on as wide basis as possible. Related standards, guidelines and recommendations of international standard setting bodies such as the Codex Alimentarius Commission (food safety); the International Plant Protection Convention (IPPC) (plant health and quarantine); and International Office of Epizootic (animal health and zoo noses) should be used in such a harmonization. International Standards for Phyto sanitary Measures (ISPM) no.18 was published under the IPPC by FAO (April 2003, Rome-Italy). ISPM standard provides technical guidance on the specific procedure for the application of ionizing radiation as a phyto sanitary treatment for regulated pests or articles. Moreover, Codex Alimentarius Commission, Codex General Standard for Irradiated Foods (Stand 106-1983) and Recommended International Code of Practice were first published in 1983 and revised in March 2003. Scope of this standard applies to foods processed by ionizing radiation that is used in conjunction with applicable hygienic codes, food standards and transportation codes. It does not apply to foods exposed to doses imparted by measuring instruments used for inspection purposes. Codex documents on Principles and Guidelines for the Import/Export Inspection and Certification of Foods have been prepared to guide international

Food irradiation receives international acceptance

International Nuclear Information System (INIS)

Beddoes, J.M.

1982-01-01

Irradition has advantages as a method of preserving food, especially in the Third World. The author tabulates some examples of actual use of food irradiation with dates and tonnages, and tells the story of the gradual acceptance of food irradiation by the World Health Organization, other international bodies, and the U.S. Food and Drug Administration (USFDA). At present, the joint IAEA/FAO/WHO standard permits an energy level of up to 5 MeV for gamma rays, well above the 1.3 MeV energy level of 60 Co. The USFDA permits irradiation of any food up to 10 krad, and minor constituents of a diet may be irradiated up to 5 Mrad. The final hurdle to be cleared, that of economic acceptance, depends on convincing the food processing industry that the process is technically and economically efficient

International standardization of instruments for neutron irradiation tests

International Nuclear Information System (INIS)

Tanimoto, Masataka; Shibata, Akira; Nakamura, Jinichi; Tsuchiya, Kunihiko; Cho, M.; Lee, C.; Park, S.; Choo, K.

2012-01-01

The JMTR in JAEA and HANARO in KAERI are the foremost testing/research reactors in the world and these are expected to contribute to many nuclear fields. As a part of instrument development in irradiation field, information exchange of instruments started from 2010 under the cooperation agreements between KAERI and JAEA. The instruments developed in JMTR and HANARO are introduced and cooperation experiments as future plan are discussed for international standardization. (author)

Legal aspects and international implications of food irradiation

International Nuclear Information System (INIS)

Gerard, Alain.

1977-11-01

This paper reports on the status of work on food irradiation at international level, namely the IAEA/FAO/WHO Vienna recommendations, the proposed EEC directive, and the Codex alimentarius draft standards. It then deals with the legal aspects of the subject, in particular the problems concerning definitions, controls and instructions, and finally reviews the regulations for international trade in irradiated foodstuffs. (NEA) [fr

International standards and agreements in food irradiation

International Nuclear Information System (INIS)

Cetinkaya, N.

2004-01-01

Full text: The economies of both developed and developing countries have been effected by their exported food and agricultural products. Trading policies of food and agricultural products are governed by international agreement as well as national regulations. Trade in food and agricultural commodities may be affected by both principal Agreements within the overall World Trade Organization (WTO) Agreement, though neither specifically refers to irradiation or irradiated foods. The principal Agreements are the Technical Barriers to Trade (TBT) Agreement and the Sanitary and Phyto sanitary (SPS) Agreement. The SPS of the WTO requires governments to harmonize their sanitary and phyto sanitary measures on as wide basis as possible. Related standards, guidelines and recommendations of international standard setting bodies such as the Codex Alimentarius Commission (food safety); the International Plant Protection Convention (IPPC) (plant health and quarantine); and International Office of Epizootic (animal health and zoo noses) should be used in such a harmonization. International Standards for Phyto sanitary Measures (ISPM) no.18 was published under the IPPC by FAO (April 2003, Rome-Italy). ISPM standard provides technical guidance on the specific procedure for the application of ionizing radiation as a phyto sanitary treatment for regulated pests or articles. Moreover, Codex Alimentarius Commission, Codex General Standard for Irradiated Foods (Stand 106-1983) and Recommended International Code of Practice were first published in 1983 and revised in March 2003. Scope of this standard applies to foods processed by ionizing radiation that is used in conjunction with applicable hygienic codes, food standards and transportation codes. It does not apply to foods exposed to doses imparted by measuring instruments used for inspection purposes. Codex documents on Principles and Guidelines for the Import/Export Inspection and Certification of Foods have been prepared to guide

DNA damage induced by radionuclide internal irradiation

International Nuclear Information System (INIS)

Cui Fengmei; Zhao Jingyong; Hong Chengjiao; Lao Qinhua; Wang Liuyi; Yang Shuqin

2004-01-01

Objective: To study the DNA damage of peripheral blood mononuclear cell (PBMC) in rats exposed to radionuclide internal irradiation. Methods: The radionuclides were injected into the rats and single cell get electrophoresis (SCGE) was performed to detect the length of DNA migration in the rat PBMC. Results: DNA migration in the rat PBMC increased with accumulative dose or dose-rate. It showed good relationship of dose vs. response and of dose-rate vs. response, both relationship could be described as linear models. Conclusion: Radionuclide internal irradiation could cause DNA damage in rat PBMC. (authors)

IFMIF : International Fusion Materials Irradiation Facility Conceptual Design Activity: Final report

International Nuclear Information System (INIS)

Martone, M.

1997-01-01

This report documents the results of the Conceptual Design Activity (CDA) on the International Fusion Materials Irradiation Facility (IFMIF), conducted during 1995 and 1996. The activity is under the auspices of the International Energy Agency (IEA) Implementing Agreement for a Programme of Research and Development on Fusion Materials. An IEA Fusion Materials Executive Subcommittee was charged with overseeing the IFMIF-CDA work. Participants in the CDA are the European Union, Japan, and the United States, with the Russian Federation as an associate member

IFMIF : International Fusion Materials Irradiation Facility Conceptual Design Activity: Final report

Energy Technology Data Exchange (ETDEWEB)

Martone, M [ENEA, Centro Ricerche Frascati, Rome (Italy)

1997-01-01

This report documents the results of the Conceptual Design Activity (CDA) on the International Fusion Materials Irradiation Facility (IFMIF), conducted during 1995 and 1996. The activity is under the auspices of the International Energy Agency (IEA) Implementing Agreement for a Programme of Research and Development on Fusion Materials. An IEA Fusion Materials Executive Subcommittee was charged with overseeing the IFMIF-CDA work. Participants in the CDA are the European Union, Japan, and the United States, with the Russian Federation as an associate member.

Irradiation experiments on materials for core internals, pressure vessel and fuel cladding

Energy Technology Data Exchange (ETDEWEB)

Tsukada, Takashi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

1998-03-01

Materials degradation due to the aging phenomena is one of the key issues for the life assessment and extension of the light water reactors (LWRs). This presentation introduces JAERI`s activities in the field of LWR material researches which utilize the research and testing reactors for irradiation experiments. The activities are including the material studies for the core internals, pressure vessel and fuel cladding. These materials are exposed to the neutron/gamma radiation and high temperature water environments so that it is worth reviewing their degradation phenomena as the continuum. Three topics are presented; For the core internal materials, the irradiation assisted stress corrosion cracking (IASCC) of austenitic stainless steels is the present major concern. At JAERI the effects of alloying elements on IASCC have been investigated through the post-irradiation stress corrosion cracking tests in high-temperature water. The radiation embrittlement of pressure vessel steels is still a significant issue for LWR safety, and at JAERI some factors affecting the embrittlement behavior such as a dose rate have been investigated. Waterside corrosion of Zircaloy fuel cladding is one of the limiting factors in fuel rod performance and an in-situ measurement of the corrosion rate in high-temperature water was performed in JMTR. To improve the reliability of experiments and to extent the applicability of experimental techniques, a mutual utilization of the technical achievements in those irradiation experiments is desired. (author)

IFMIF : International Fusion Materials Irradiation Facility Conceptual Design Activity: Executive summary

International Nuclear Information System (INIS)

1997-01-01

This report is a summary of the results of the Conceptual Design Activity (CDA) on the International Fusion Materials Irradiation Facility (IFMIF), conducted during 1995 and 1996. The activity is under the auspices of the International Energy Agency (IEA) Implementing Agreement for a Programme of Research and Development on Fusion Materials. An IEA Fusion Materials Executive Subcommittee was charged with overseeing the IFMIF-CDA work. Participants in the CDA are the European Union, Japan, and the United States, with the Russian Federation as an associate member

IFMIF : International Fusion Materials Irradiation Facility Conceptual Design Activity: Executive summary

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-01-01

This report is a summary of the results of the Conceptual Design Activity (CDA) on the International Fusion Materials Irradiation Facility (IFMIF), conducted during 1995 and 1996. The activity is under the auspices of the International Energy Agency (IEA) Implementing Agreement for a Programme of Research and Development on Fusion Materials. An IEA Fusion Materials Executive Subcommittee was charged with overseeing the IFMIF-CDA work. Participants in the CDA are the European Union, Japan, and the United States, with the Russian Federation as an associate member.

R and D Developments. Research Programs on Irradiation Embrittlement of Reactor Vessel Steels

International Nuclear Information System (INIS)

Gomez Briceno, D.; Lapena, J.; Serrano, M.; Perosanz, F.

2000-01-01

Irradiation embrittlement of pressure vessel steels is a degradation mechanism time dependent that can lead to operational restrictions with adverse effects in the efficiency and life of a plant. For the last year, several research programs have been devoted to study thye evaluation of neutronic radiation effect on mechanical properties of pressure vessel steels. However, at the present, there is a growing interest on the development of new methodologies to optimize the surveillance program information, and the understanding of the irradiation damage mechanism. This paper give an overview of international research programs, and on the R+D activities carried out by the Structural Materials Project on irradiation embrittlement on pressure vessel steels. (Author)

How to improve the irradiation conditions for the International Fusion Materials Irradiation Facility

CERN Document Server

Daum, E

2000-01-01

The accelerator-based intense D-Li neutron source International Fusion Materials Irradiation Facility (IFMIF) provides very suitable irradiation conditions for fusion materials development with the attractive option of accelerated irradiations. Investigations show that a neutron moderator made of tungsten and placed in the IFMIF test cell can further improve the irradiation conditions. The moderator softens the IFMIF neutron spectrum by enhancing the fraction of low energy neutrons. For displacement damage, the ratio of point defects to cascades is more DEMO relevant and for tritium production in Li-based breeding ceramic materials it leads to a preferred production via the sup 6 Li(n,t) sup 4 He channel as it occurs in a DEMO breeding blanket.

Internal friction in irradiated silicon

International Nuclear Information System (INIS)

Kalanov, M.U.; Pajzullakhanov, M.S.; Khajdarov, T.; Ummatov, Kh.

1999-01-01

The submicroscopic heterogeneities in mono- and polycrystal silicon and the influence of X-ray radiation on them were investigated using the ultrasound resonance method. Disk-shaped samples of 27.5 mm in diameter and 4 mm in thickness, with the flat surface parallel to crystallographic plane (111), were irradiated by X-ray beam of 1 Wt/cm 2 (50 KeV, Mo K α ) during 10 hours. Relations of internal frictions (Q -1 ) of samples and their relative attitude (ψ) - Q -1 (ψ) show that there is a presence of double-humped configuration for monocrystal silicon with the peaks at ψ=900 and 270 degrees. The relations Q -1 (ψ) remain the same after the irradiation. However, the peak width becomes larger. This data show that the configuration and attitude of the heterogeneities remain the same after the irradiation. The double-humped configuration was not discovered for the relations Q -1 (ψ) of polycrystal silicon. It is explained by the fact that there is an isotropic distribution in the content of many blocks and granules

The characteristics and mechanism of apoptosis induced by internal irradiation

International Nuclear Information System (INIS)

Hong Chengjiao; Zhang Junning; Zhu Shoupeng

2001-01-01

Apoptosis in tumor cells induced by radionuclides is likely the most effective way to cure cancer. In order to explore the possibility in clinic application, the characteristics and mechanism of apoptosis induced by internal irradiation were investigated. The apoptosis and expressions of bcl-2mRNA, bcl-2 and bax of K 562 cells following internal exposure with different accumulated absorbed doses of strontium-89 were studied. 6 h after irradiation, the characteristics of apoptosis and necrosis appeared in K 562 cells. The apoptosis and necrosis enhanced with the prolongation of internally contaminated time at 6 h, 9 h, 12 h, 24 h and 48 h. The expressions of bcl-2mRNA decreased at 12 h, most remarkably at 24 h. The expressions of bcl-2 decreased after irradiation whereas bax had no obvious changes. The results suggest that the apoptosis induced by internal exposure may be regulated by lower expressions of bcl-2mRNA and bcl-2, lower bcl-2/bax value

Degradation of austenitic stainless steel (SS) light water ractor (LWR) core internals due to neutron irradiation

Energy Technology Data Exchange (ETDEWEB)

Rao, Appajosula S., E-mail: Appajosula.Rao@nrc.gov

2014-04-01

Austenitic stainless steels (SSs) are extensively being used in the fabrication of light water reactor (LWR) core internal components. It is because these steels have relatively high ductility, fracture toughness and moderate strength. However, the LWR internal components exposure to neutron irradiation over an extended period of plant operation degrades the materials mechanical properties such as the fracture toughness. This paper summarizes some of the results of the existing open literature data on irradiation assisted stress corrosion cracking (IASCC) of 316 CW steels that have been published by the United States Nuclear Regulatory Commission (USNRC), industry, academia, and other research agencies.

The Research of Food Preservation by Irradiation and Its Industrialization in Korea

International Nuclear Information System (INIS)

Cho, Han Ok

1987-01-01

Since the late 1960s, radiation effects on the storage of potatoes, strawberry, grapes and rice have been investigated on an experimental basis in Korea, Based on the research results of batch scale storage for sprouting food (potatoes, onions, chestnuts) and white ginseng powder by the Korea Advanced Energy Research Institute (KAERI) and on the recommendation. Food irradiation is a new process that may provide an alternative to existing food processes. From the extensive research in food irradiation for more than three decades by leading international organizations and advanced countries, the efficacy of a number of applications has been established, including sprout inhibition, disinfestation of insects, sterilization, delay of ripening, and improvement of organoleptic properties in food. Owing to the recommendation on the Wholesomeness of Irradiated Food by the Joint FAO/IAEA/W/o Expert Committee in 1980 and the adaption of the Codex General Standard for Irradiated Food by the Codex Allurements Commission in 1983, as of May 1985, thirty-two countries have officially approved 227 food items in 73 food groups as safe for human consumption. Food irradiation processing is increasingly recognized as a viable technology for reducing the overall quantity of spoiled food, reducing energy used in food storage, and reducing reliance on chemicals currently used

The dynamics of immunologic reactions in rats affected by repeated external γ-irradiation and internal irradiation with radionuclides

International Nuclear Information System (INIS)

Shubik, V.M.; Livshits, R.E.

1975-01-01

Nonspecific factors of immunity and formation of autoantibodies in rats exposed to comparable doses of repeated external γ-irradiation and of internal irradiation with Cs 137 , Sr 90 and I 131 chronically administered to animals have been studied comparatively. No essential variations have been found in changes induced in the immunologic reactions by chronic external and even internal γ-irradiation. Certain peculiarities have been revealed in the character of changes in the immunologic reactions depending on biophysical properties of the radionuclides used in the experiments

Dosimetry and irradiation methods for the ANSTO gamma technology research irradiator (GATRI)

International Nuclear Information System (INIS)

Izard, M.E.

1988-07-01

The Australian Nuclear Science and Technology Organisation's gamma technology research irradiator (GATRI) at Lucas Heights, New South Wales, has been modified for use as a research and small-scale commercial irradiation facility to be available to government agencies and private industry for the technical and economic evaluation of irradiation processing. The new source rack was designed around existing mechanical components to optimise the limited space available within the irradiation cell. Irradiation parameters investigated during commissioning included the effect of source-to-target distance on relative dose rates within targets of the same density; effect of density on dose-rate distribution within targets irradiated at the same distance from the source; and the contribution of transit dose to low absorbed doses as the source is raised and lowered. The efficiency of the irradiator was determined for various target densities and overdose ratios

International Fusion Materials Irradiation Facility conceptual design activity. Present status and perspective

International Nuclear Information System (INIS)

Kondo, Tatsuo; Noda, Kenji; Oyama, Yukio

1998-01-01

For developing the materials for nuclear fusion reactors, it is indispensable to study on the neutron irradiation behavior under fusion reactor conditions, but there is not any high energy neutron irradiation facility that can simulate fusion reactor conditions at present. Therefore, the investigation of the IFMIF was begun jointly by Japan, USA, Europe and Russia following the initiative of IEA. The conceptual design activities were completed in 1997. As to the background and the course, the present status of the research on heavy irradiation and the testing means for fusion materials, the requirement and the technical basis of high energy neutron irradiation, and the international joint design activities are reported. The materials for fusion reactors are exposed to the neutron irradiation with the energy spectra up to 14 MeV. The requirements from the users that the IFMIF should satisfy, the demand of the tests for the materials of prototype and demonstration fusion reactors and the evaluation of the neutron field characteristics of the IFMIF are discussed. As to the conceptual design of the IFMIF, the whole constitution, the operational mode, accelerator system and target system are described. (K.I.)

Description of the PIE facility for research reactors irradiated fuels in CNEA

International Nuclear Information System (INIS)

Bisca, A.; Coronel, R.; Homberger, V.; Quinteros, A.; Ratner, M.

2002-01-01

The PIE Facility (LAPEP), located at the Ezeiza Atomic Center (CAE), was designed to carry out destructive and non-destructive post-irradiation examinations (PIE) on research and power reactor spent fuels, reactor internals and other irradiated materials, and to perform studies related with: Station lifetime extension; Fuel performance; Development of new fuels; and Failures and determination of their causes. LAPEP is a relevant facility where research and development can be carried out. It is worth mentioning that in this facility the PIE corresponding to the Surveillance Program for the Atucha I Nuclear Power Plant (CNA-1) were successfully performed. Materials testing during the CNA-1 repair and the study of failures in fuel element plugs of the Embalse Nuclear Power Plant (CNE) were also performed. (author)

Researches and commercialization of food irradiation technology in China

International Nuclear Information System (INIS)

Gao Meixu; Ha Yiming; Chen Hao; Liu Chunquan; Chen Xiulan

2007-01-01

The status of food irradiation on research, standard and commercialization is described in the paper. The main research fields now include degradation of chloramphenicol residue by irradiation, promoting safety of meat products, frozen seafood and ready-to-eat products by irradiation, lower activity of allergic protein by irradiation, identification of irradiated food and irradiation as a phytosanitary treatment. The existed standards need to be revised, and new standard need to be established. The commercialization stages of food irradiation and quality assurance system of irradiation company are also analyzed. (authors)

Combined effect of external and internal irradiation

International Nuclear Information System (INIS)

Kiradzhiev, G.

1987-01-01

Some of the general regularities of the combined effect of external irradiation and iodine 131 are discussed. Data are adduced showing that modification of the effects of these two radiation factors, when jointly applied, is also determined by the quantitative relations of the applied doses of external and internal irradiation, referred to a particular moment of the effects. It was shown that the effects of the radionuclides in these combined radiation injuries are basically realized by two mechanisms: 1. changes are found in the radionuclide kinetic parameters (nonspecific effects); 2. changes in their kinetic parameters are absent (specific effect). These two mechanisms underlie different approaches to therapy

Neutronics analysis of International Fusion Material Irradiation Facility (IFMIF). Japanese contributions

International Nuclear Information System (INIS)

Oyama, Yukio; Noda, Kenji; Kosako, Kazuaki.

1997-10-01

In fusion reactor development for demonstration reactor, i.e., DEMO, materials tolerable for D-T neutron irradiation are absolutely required for both mechanical and safety point of views. For this requirement, several kinds of low activation materials were proposed. However, experimental data by actual D-T fusion neutron irradiation have not existed so far because of lack of fusion neutron irradiation facility, except fundamental radiation damage studies at very low neutron fluence. Therefore such a facility has been strongly requested. According to agreement of need for such a facility among the international parties, a conceptual design activity (CDA) of International Fusion Material Irradiation Facility (IFMIF) has been carried out under the frame work of the IEA-Implementing Agreement. In the activity, a neutronics analysis on irradiation field optimization in the IFMIF test cell was performed in three parties, Japan, US and EU. As the Japanese contribution, the present paper describes a neutron source term as well as incident deuteron beam angle optimization of two beam geometry, beam shape (foot print) optimization, and dpa, gas production and heating estimation inside various material loading Module, including a sensitivity analysis of source term uncertainty to the estimated irradiation parameters. (author)

Research on food irradiation in Indonesia

International Nuclear Information System (INIS)

Hilmy, N.; Maha, M.; Chosdu, R.

1986-01-01

Studies on various aspects of food irradiation have been done in Indonesia since 1968, mainly at the Centre for the Application of Isotopes and Radiation, National Atomic Energy Agency of Indonesia. Three irradiation facilities available at the Centre are gamma cell-220, panoramic batch irradiator, and latex irradiator with the present source capacities of about 1.1, 40, and 163.8 kCi Co-60, respectively. In this paper, the present status of research and development on irradiation is presented, covering (1) spices and medicinal plants, (2) rice, wheat flour and coffee bean, (3) fish and fishery products, (4) animal feed, and (5) ongoing projects including fresh fruits, cacao beans, and cashew nut. The Sub-Committee for the Control of Irradiation of Food and Medical Products, set up in August 1984, has prepared the draft of recommendations regarding the regulation for application of food irradiation in Indonedia and the draft of Regulation for the Control of and Trade in Irradiated Food and Traditional Drug to be issued by the government. (Namekawa, K.)

Influence of electron irradiation on internal friction and structure evolution of polymer composites

International Nuclear Information System (INIS)

Ismailova, G.A.

2007-01-01

Full text: Important qualitative information on structural evolution and radiation alterations in polymer materials under the action of ionizing radiation can be obtained from the analysis of the temperature dependences of internal friction. Changing of internal friction parameters of relax maxima during irradiation is qualitative degree parameter of radiation scission-cross linking of the polymer molecules. In this work, the general phenomenological approach is realized by introduction of the effective 'observed' parameters into the simple kinetic equations. The applicability of such approach is justified by the fact that kinetics of both internal friction and scission-cross linking processes can be characterized by the same effective parameters. Temperature dependences of internal friction are experimentally studied in epoxy irradiated by 2.5 MeV pulse electron beam to different doses (D=3 MGy, 6 MGy and 9 MGy). Time dependences of internal friction characteristics associated with radiation-induced processes of polymer scission and cross-linking are analyzed and discussed. Experimental data on kinetics of structural transformations in epoxy are interpreted on the base of analytical solutions of differential equations for free radical accumulation during and after irradiation subject to the arbitrary effective order of radical recombination. It is shown that in the range of doses and dose rates under study radiation-induced scission predominates during polymer irradiation but in a certain period of time after irradiation scission changes to cross-linking. Characteristics of the kinetic curves obtained essentially depend on the dose

Worldwide status of food irradiation and the role of IAEA and other international organizations

International Nuclear Information System (INIS)

Loaharanu, P.

1988-01-01

While there has been an increasing interest in introducing irradiation for preservation and decontamination of food by national authorities and food industry, this technology has generated wide public debate in view of its perceived association with nuclear technology. The purpose of this paper is twofold: (1) to provide objectivity to the application of irradiation for food processing and (2) to project future trends of this technology. Irradiation appears to offer the most viable alternative to the existing technologies in quarantine treatment, hygienic quality of foods, reduction of food losses, and increase in market demand for fresh foods. Current limitations of food irradiation are discussed in terms of technical aspects, infrastructure and economics, consumer concerns, and harmonization of national regulations. Commercial applications have been reported in 19 countries. It is estimated that the total production of irradiated foods world-wide amounted to approximately 500,000 tons per annum. To ensure an effective implementation of the technology on a global basis, FAO and WHO have collaborated closely with the IAEA. An International Consultative Group on Food Irradiation was established under the aegis of FAO, IAEA, and WHO in May 1984. These organizations play an important role in training, technology transfer, developing guidelines on specific applications of food irradiation, international register of food irradiation facilities, acceptance and international trade in irradiated foods, and public information. (Namekawa, K.)

Worldwide status of food irradiation and the role of IAEA and other international organizations

Energy Technology Data Exchange (ETDEWEB)

Loaharanu, P.

1988-04-01

While there has been an increasing interest in introducing irradiation for preservation and decontamination of food by national authorities and food industry, this technology has generated wide public debate in view of its perceived association with nuclear technology. The purpose of this paper is twofold: (1) to provide objectivity to the application of irradiation for food processing and (2) to project future trends of this technology. Irradiation appears to offer the most viable alternative to the existing technologies in quarantine treatment, hygienic quality of foods, reduction of food losses, and increase in market demand for fresh foods. Current limitations of food irradiation are discussed in terms of technical aspects, infrastructure and economics, consumer concerns, and harmonization of national regulations. Commercial applications have been reported in 19 countries. It is estimated that the total production of irradiated foods world-wide amounted to approximately 500,000 tons per annum. To ensure an effective implementation of the technology on a global basis, FAO and WHO have collaborated closely with the IAEA. An International Consultative Group on Food Irradiation was established under the aegis of FAO, IAEA, and WHO in May 1984. These organizations play an important role in training, technology transfer, developing guidelines on specific applications of food irradiation, international register of food irradiation facilities, acceptance and international trade in irradiated foods, and public information. (Namekawa, K.).

IAEA and food irradiation

International Nuclear Information System (INIS)

Machi, Sueo

1995-01-01

IAEA was founded in 1957. 122 countries take part in it. It is operated with the yearly ordinary budget of about 20 billion yen and the technical cooperation budget of about 6 billion yen and by 2200 personnel. Its two important roles are the promotion of the peaceful utilization of atomic energy and the prevention of nuclear proliferation. The activities of IAEA are shown. The cooperation with developing countries and the international research cooperation program are the important activities. The securing of foods is an urgent subject, and the utilization of radiation and isotopes has been promoted, aiming at sustaining agriculture. The necessity of food irradiation is explained, and at present, commercial food irradiation is carried out in 28 countries including Japan. The irradiation less than 10 kGy does not cause poisonous effect in any food, according to JECFI. The new international agreement is expected to be useful for promoting the international trade of irradiated foods. The international cooperation for the spread of food irradiation and the public acceptance of food irradiation are reported. (K.I.)

BNFL's experience in the sea transport of irradiated research reactor fuel to the USA

International Nuclear Information System (INIS)

Hudson, I.A.; Porter, I.

2000-01-01

BNFL provides worldwide transport for a wide range of nuclear materials. BNFL Transport manages an unique fleet of vessels, designed, built, and operated to the highest safety standards, including the highest rating within the INF Code recommended by the International Maritime Organisation. The company has some 20 years of experience of transporting irradiated research reactor fuel in support of the United States' programme for returning US obligated fuel from around the world. Between 1977 and 1988 BNFL performed 11 shipments of irradiated research reactor fuel from the Japan Atomic Energy Research Institute to the US. Since 1997, a further 3 shipments have been performed as part of an ongoing programme for Japanese research reactor operators. Where possible, shipments of fuel from European countries such as Sweden and Spain have been combined with those from Japan for delivery to the US. (author)

High activity gamma irradiators developed in Hungary

International Nuclear Information System (INIS)

Stenger, V.

1997-01-01

The development of high activity Gamma irradiators began in Hungary already in the early years of 60s. The very first designs were serving research in irradiation chemistry, radiation physics, food and agricultural research, radiation sterilization, plastic radiation chemistry, radiobiology, cancer therapy, personal and high dose dosimetry, following the international trends. Domestic and new international demands forced us to design and construct High Activity Gamma Irradiators: Multipurpose Pilot, Portable and Large scale bulk, Multipurpose Industrial scale types

Influence of chronic internal and acute external irradiations on the critical tissues of plants

International Nuclear Information System (INIS)

Kostyuk, O.P.; Ryasnenko, N.A.; Grodzins'kij, D.M.

1998-01-01

Peculiarities of chronic internal and acute external irradiations of the critical (as for irradiation influence) plants part, meristem, are studied. In particular, the investigation has aimed to evaluate the level of doses, accumulated by plant tissues, of the chronic internal irradiation from radiocaesium incorporated by them, and to compare its possible effect to one caused by the acute external irradiation. It is shown that the effects of both chronic and acute irradiations have similar features, and it is assumed that they have the very same mechanisms. We think that such a parameter of the plant ability to accumulate radiocaesium as the ratio of its content in a root tip and in the whole root system is a very sensible and useful criterion to estimate the irradiation influence on plants

Study by internal friction of curing low temperature irradiation defects in graphite

International Nuclear Information System (INIS)

Rouby, Dominique.

1974-01-01

Micromechanical properties and anelastic effects of neutrons irradiated graphites at 300 and 77 0 K are investigated by internal friction analysis and elasticity modulus variations. Defects created by irradiation are studied and evolution versus dose and annealing is followed [fr

Adequate irradiation of the internal jugular lymph node chain: technical considerations

International Nuclear Information System (INIS)

Aref, Amr; Gross, Martin; Fontanesi, James; Devi, Syamala; Kopel, Christine; Thornton, Dale

1997-01-01

Purpose: This research aimed to study the anatomic relationship between the internal jugular vein with the surrounding internal jugular lymph node chain and the underlying bony anatomical structures which are commonly used as landmarks for radiation therapy planning. Methods and Materials: Twelve patients with carcinoma of the head and neck region were studied prospectively. Using our three-dimensional planning system, a beam's-eye view of the internal jugular vein was projected onto a lateral and anterior simulation film. Quantitative measurements were made in every case of the anatomic relationship between the internal jugular vein and the posterior border of the cervical vertebrae and sagittal midline. Results: The distance between the posterior border of the internal jugular vein and the posterior border of the cervical vertebrae ranged between 0 and 2.5 cm. The distances between the sagittal midline and the medial border of the internal jugular veins ranged between 2 and 4 cm. Conclusion: To ensure adequate irradiation of the internal jugular lymph nodes, the posterior border of the lateral radiation therapy upper-neck fields should be placed at least 1 cm posterior to the posterior aspect of the cervical vertebrae. The midline block used in the lower neck anterior field should not exceed 2 cm in width

Food irradiation 2009

International Nuclear Information System (INIS)

Narvaiz, Patricia

2009-01-01

Food irradiation principles; its main applications, advantages and limitations; wholesomeness, present activities at Ezeiza Atomic Centre; research coordinated by the International Atomic Energy Agency; capacity building; and some aspects on national and international regulations, standards and commercialization are briefly described. At present 56 countries authorize the consumption of varied irradiated foods; trade is performed in 32 countries, with about 200 irradiation facilities. Argentina pioneered nuclear energy knowledge and applications in Latin America, food irradiation included. A steady growth of food industrial volumes treated in two gamma facilities can be observed. Food industry and producers show interest towards new facilities construction. However, a 15 years standstill in incorporating new approvals in the Argentine Alimentary Code, in spite of consecutive request performed either by CNEA or some food industries restricts, a wider industrial implementation, which constitute a drawback to future regional commercialization in areas such as MERCOSUR, where Brazil since 2000 freely authorize food irradiation. Besides, important chances in international trade with developed countries will be missed, like the high fresh fruits and vegetables requirements United States has in counter-season, leading to convenient sale prices. The Argentine food irradiation facilities have been designed and built in the country. Argentina produces Cobalt-60. These capacities, unusual in the world and particularly in Latin America, should be protected and enhanced. Being the irradiation facilities scarce and concentrated nearby Buenos Aires city, the possibilities of commercial application and even research and development are strongly limited for most of the country regions. (author) [es

Food Irradiation Newsletter. V.13, no. 1

International Nuclear Information System (INIS)

1989-03-01

The International Conference on the Acceptance, Control of, and Trade in Irradiated Food, jointly sponsored by FAO, IAEA, WHO and ITC-UNCTAD/GATT, Geneva, Switzerland, December 1988, recognized that (1) food irradiation has the potential to reduce the incidence of foodborne diseases; (2) food irradiation can reduce post-harvest food losses and make available a larger quantity and a wider variety of foodstuffs for consumers - It can also be an effective quarantine treatment for certain food and thus contribute to international trade; (3) international trade in irradiated foods would be facilitated by harmonization of national procedures based on internationally recognized standards for the control of food irradiation. The ''International Document on Food Irradiation'' adopted by consensus at the Conference is included in this issue, which also contains excerpts of the 5th Annual Meeting of the International Consultative Group on Food Irradiation (ICGFI), convened in Vienna, September 1988, and reports of two co-ordinated meetings, the second Research Co-ordination Meeting on the Use of Irradiation as a Quarantine Treatment of Food and Agricultural Commodities, and the Second Co-ordination Meeting on Food Irradiation Programme for Developing Countries in Middle East and Europe. 3 tabs

Radiation research of materials using irradiation capsules

International Nuclear Information System (INIS)

Chamrad, B.

1976-01-01

The methods are briefly characterized of radiation experiments on the WWR-S research reactor. The irradiation capsule installed in the reactor including the electronic instrumentation is described. Irradiated samples temperature is stabilized by an auxiliary heat source placed in the irradiation space. The electronic control equipment of the system is automated. In irradiation experiments, experimental and operating conditions are recorded by a digital measuring centre with electric typewriter and paper tape data recording and by an analog compensating recorder. The irradiation experiment control system controls irradiated sample temperature, the supply current size and the heating element temperature of the auxiliary stabilizing source, inert and technological pressures of the capsule atmosphere and the thermostat temperature of the thermocouple junctions. (O.K.)

Mathematical models in Slowpoke reactor internal irradiation site

International Nuclear Information System (INIS)

Raza, J.

2007-01-01

The main objective is to build representative mathematical models of neutron activation analysis in a Slowpoke internal irradiation site. Another significant objective is to correct various elements neutron activation analysis measured mass using these models. The neutron flux perturbation is responsible for the measured under-estimation of real masses. We supposed that neutron flux perturbation measurements taken during the Ecole Polytechnique de Montreal Slowpoke reactor first fuel loading were still valid after the second fuelling. .We also supposed that the thermal neutrons spatial and kinetic energies distributions as well as the absorption microscopic cross section dependence on the neutrons kinetic energies were important factors to satisfactorily represent neutron activation analysis results. In addition, we assumed that the neutron flux is isotropic in the laboratory system. We used experimental results from the Slowpoke reactor internal irradiation sites, in order to validate our mathematical models. Our models results are in close agreement with these experimental results..We established an accurate global mathematical correlation of the neutron flux perturbation in function of samples volumes and macroscopic neutron absorption cross sections. It is applicable to sample volumes ranging from 0,1 to 1,3 ml and macroscopic neutron absorption cross section up to 5 moles-b for seven (7) elements with atomic numbers (Z) ranging from 5 to 79. We first came up with a heuristic neutron transport mathematical semi-analytical model, in order to better understand neutrons behaviour in presence of one of several different nuclei samples volumes and mass. In order to well represent the neutron flux perturbation, we combined a neutron transport solution obtained from the spherical harmonics method of a finite cylinder and a mathematical expression combining two cylindrical harmonic functions..With the help of this model and the least squares method, we made extensive

Irradiation Performance of HTGR Fuel in WWR-K Research Reactor

International Nuclear Information System (INIS)

Ueta, Shohei; Sakaba, Nariaki; Shaimerdenov, Asset; Gizatulin, Shamil; Chekushina, Lyudmila; Chakrov, Petr; Honda, Masaki; Takahashi, Masashi; Kitagawa, Kenichi

2014-01-01

A capsule irradiation test with the high temperature gas-cooled reactor (HTGR) fuel is being carried out using WWR-K research reactor in the Institute of Nuclear Physics of the Republic of Kazakhstan (INP) to attain 100 GWd/t-U of burnup under normal operating condition of a practical small-sized HTGR. This is the first HTGR fuel irradiation test for INP in Kazakhstan collaborated with Japan Atomic Energy Agency (JAEA) in frame of International Science and Technology Center (ISTC) project. In the test, TRISO coated fuel particle with low-enriched UO_2 (less than 10 % of "2"3"5U) is used, which was newly designed by JAEA to extend burnup up to 100 GWd/t-U comparing with that of the HTTR (33 GWd/t-U). Both TRISO and fuel compact as the irradiation test specimen were fabricated in basis of the HTTR fuel technology by Nuclear Fuel Industries, Ltd. in Japan. A helium-gas-swept capsule and a swept-gas sampling device installed in WWR-K were designed and constructed by INP. The irradiation test has been started in October 2012 and will be completed up to the end of February 2015. The irradiation test is in the progress up to 69 GWd/t of burnup, and integrity of new TRISO fuel has been confirmed. In addition, as predicted by the fuel design, fission gas release was observed due to additional failure of as-fabricated SiC-defective fuel. (author)

Status and future of food irradiation research project

International Nuclear Information System (INIS)

Fujimaki, Masao

1982-01-01

The first part of the report presented the results of wholesomeness evaluation of the irradiated potato, onion, rice and wheat by Organization of the National Research Programme on Food Irradiation which conducts food irradiation in Japan. The second part dealt with the wholesomeness evaluation of food irradiation by the joint specialist conference of FAO, IAEA and WHO. It was concluded that irradiation of a maximum mean of 10 KGy or less was unconditionally permissible for every food item, not requiring a toxicity test. However, the relationship between irradiation techniques and economic feasibility, wholesomeness of high dose irradiation, the human effect of use of irradiated food item, food chemistry and nutritional problems remain to be examined. (Chibe, N.)

Research in radiobiology. Annual report of work in progress in the internal irradiation program

International Nuclear Information System (INIS)

Miller, S.C.

1983-01-01

Research progress on studies of the effects of internally deposited radionuclides in dogs, mice, and humans is reported. The studies include toxicity of plutonium 239, radium 226, and radium 224, the kinetics of actinides in beagles, and dosimetry of internal emitters

Non-destructive tests of capsules for JMTR irradiation examination

International Nuclear Information System (INIS)

Tanaka, Hidetaka; Nagao, Yoshiharu; Sato, Masashi; Osawa, Kenji

2007-03-01

Irradiation examination are increasing in advanced irradiation research for accurate prediction control and evaluation of irradiation parameter such as neutron fluence, etc. by using JMTR. Irradiation capsule internals are therefore structurally complicated recently. This report described the procedure of non destructive tests such as radiographic test, penetrant test, ultrasonic test, etc. for inspection of irradiation capsules in JMTR, and the result of Test-case of confirmation procedure for internal parts of irradiation capsules. (author)

Present status of research within the International Project

International Nuclear Information System (INIS)

Anon.

1975-01-01

The short report enumerates the studies which are now completed by the International Project in the Field of Food Irradiation and the studies to be continued. New feeding studies with irradiated fish, rice, spices and mangoes are performed. (MG) [de

N-Acetyl-L-cysteine protects thyroid cells against DNA damage induced by external and internal irradiation.

Science.gov (United States)

Kurashige, Tomomi; Shimamura, Mika; Nagayama, Yuji

2017-11-01

We evaluated the effect of the antioxidant N-acetyl-L-cysteine (NAC) on the levels of reactive oxygen species (ROS), DNA double strand breaks (DSB) and micronuclei (MN) induced by internal and external irradiation using a rat thyroid cell line PCCL3. In internal irradiation experiments, ROS and DSB levels increased immediately after 131 I addition and then gradually declined, resulting in very high levels of MN at 24 and 48 h. NAC administration both pre- and also post- 131 I addition suppressed ROS, DSB and MN. In external irradiation experiments with a low dose (0.5 Gy), ROS and DSB increased shortly and could be prevented by NAC administration pre-, but not post-irradiation. In contrast, external irradiation with a high dose (5 Gy) increased ROS and DSB in a bimodal way: ROS and DSB levels increased immediately after irradiation, quickly returned to the basal levels and gradually rose again after >24 h. The second phase was in parallel with an increase in 4-hydroxy-2-nonenal. The number of MN induced by the second wave of ROS/DSB elevations was much higher than that by the first peak. In this situation, NAC administered pre- and post-irradiation comparably suppressed MN induced by a delayed ROS elevation. In conclusion, a prolonged ROS increase during internal irradiation and a delayed ROS increase after external irradiation with a high dose caused serious DNA damage, which were efficiently prevented by NAC. Thus, NAC administration even both after internal or external irradiation prevents ROS increase and eventual DNA damage.

Combination processes for food irradiation. Proceedings of the final research co-ordination meeting

International Nuclear Information System (INIS)

1998-01-01

There is an increasing consumer demand for food that is safe, minimally processed, visually attractive, full flavoured, nutritious, and convenient to prepare and serve, that has fewer preservatives, and that is available throughout the year at an affordable cost. Consumer concern and regulatory restrictions on the use of preservatives and pesticides in food are adversely affecting international trade in many food products. As a result, minimally processed, chilled foods and ready to eat foods are increasingly being marketed to satisfy consumer demand in both developed and developing countries. However, such foods could introduce new microbiological risks to the population, especially to those who are immunocompromised or generally at risk (children, pregnant women, the elderly, etc.). In view of these factors, a 5 year Co-ordinated Research Programme (CRP) on Irradiation in Combination with Other Processes for Improving Food Quality was initiated in 1991 by the Food and Agriculture Organization of the United Nations and the International Atomic Energy Agency through their Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture. The objectives of this CRP were to evaluate: 1) Combination treatment involving irradiation in order to extend the self-life of meat, seafood, fruits and vegetables at refrigeration temperatures and under ambient conditions; 2) Combination treatment involving irradiation in order to ensure the microbiological safety of foods, both individual and composite, including prepared meals; 3) Shelf-life extension of chilled, prepared meals and the development of shelf stable food and food components through combination treatment involving irradiation; 4) Energy requirements of combination processes involving irradiation in comparison to other food processes. Scientists from 14 countries participated in the CRP by carrying out the work under Research Contracts and Agreements with the Joint FAO/IAEA Division. The first Research Co

Food problems and food irradiation, recent trend

International Nuclear Information System (INIS)

1990-01-01

Food irradiation is to contribute to the stable security of foodstuffs which is the fundamental condition of human survival by improving the preservation of foodstuffs and food sanitation utilizing the biological effect due to irradiation. The research and development have been carried out internationally since 1950s, but after the safety declaration of irradiated foods in 1980 by the international organ concerned, the permission and practical use for foods in various foreign countries, the technology transfer to developing countries and so on have been advanced. At present, food irradiation is permitted in 38 countries, and the practical irradiation is carried out in 24 countries. In Japan, the irradiation of potatoes to prevent germination was permitted in 1972, and the practical irradiation on potatoes of yearly 15,000 t is carried out. In the near future, irradiated foods will appear in international foodstuff market, and Japan which imports foodstuffs must cope with them. Foodstuffs and the safety, food irradiation, the soundness of irradiated foods, food irradiation in various foreign countries and Japan, the trend of international organs and the criticism of food irradiation are reported. (K.I.)

A new apparatus at hyper irradiation research facility at the Atomic Research Center, University of Tokyo

International Nuclear Information System (INIS)

Shibata, Hiromi; Iwai, Takeo; Narui, Makoto; Omata, Takao

1996-01-01

In the hyper irradiation research facility at the Atomic Research Center, the University of Tokyo, following apparatuses were newly installed for accelerator relating apparatus on 1995 fiscal year; 1) Hyper ion microbeam analysis apparatus, 2) Fourier conversion infrared microscopy, 3) Pico second two-dimensional fluorescence measuring apparatus, 4) Femto second wave-length reversible pulse laser radiation apparatus, and others. In addition to double irradiation, pulse beam irradiation experiment and so forth characteristic in conventional hyper irradiation research apparatus, upgrading of material irradiation experiments using these new apparatuses are intended. (G.K.)

A new apparatus at hyper irradiation research facility at the Atomic Research Center, University of Tokyo

Energy Technology Data Exchange (ETDEWEB)

Shibata, Hiromi; Iwai, Takeo; Narui, Makoto; Omata, Takao [Tokyo Univ. (Japan). Research Center for Nuclear Science and Technology

1996-12-01

In the hyper irradiation research facility at the Atomic Research Center, the University of Tokyo, following apparatuses were newly installed for accelerator relating apparatus on 1995 fiscal year; (1) Hyper ion microbeam analysis apparatus, (2) Fourier conversion infrared microscopy, (3) Pico second two-dimensional fluorescence measuring apparatus, (4) Femto second wave-length reversible pulse laser radiation apparatus, and others. In addition to double irradiation, pulse beam irradiation experiment and so forth characteristic in conventional hyper irradiation research apparatus, upgrading of material irradiation experiments using these new apparatuses are intended. (G.K.)

Combination Processes in Food Irradiation. Proceedings of an International Symposium on Combination Processes in Food Irradiation

International Nuclear Information System (INIS)

1981-01-01

Processes in Food Irradiation was held by the IAEA and FAO at the Bandaranaike Memorial International Conference Hall in Colombo on 24-28 November 1980, and the present volume contains the proceedings. One of the most effective means demonstrated of increasing the efficacy of irradiation in the control of food spoilage is the combination of a low irradiation dose with a mild heat treatment. Promising results were reported for the shelf-life extension of mangoes and papayas, and the disinfestation of dried dates. Commercial application of the heat-irradiation treatment for some fruits is expected to follow soon. The Symposium covered other topics, such as the mechanisms of sensitization of microorganisms by physical and chemical agents, improvement of the microbiological quality of foods by combination processes, and the aspects of the wholesomeness and legislation of the food irradiation process. A key issue in the general discussion was the recommendation on the acceptability of food irradiated up to an overall average dose of 10 kGy. This important recommendation had been achieved at a recently convened Joint FAO/IAEA/WHO Expert Committee on the Wholesomeness of Irradiated Foods (27 October — 3 November 1980, Geneva). The breakthrough on the toxicological acceptability constitutes a firm basis for going ahead speedily with the development of practical applications of food irradiation, which should take its rightful place among other food preservation methods in helping to provide more and better food to a world in need. The sponsoring organizations hope that the publication of these proceedings will encourage further research and development of food irradiation to the benefit of mankind

Combination Processes in Food Irradiation. Proceedings of an International Symposium on Combination Processes in Food Irradiation

Energy Technology Data Exchange (ETDEWEB)

NONE

1981-09-15

Processes in Food Irradiation was held by the IAEA and FAO at the Bandaranaike Memorial International Conference Hall in Colombo on 24-28 November 1980, and the present volume contains the proceedings. One of the most effective means demonstrated of increasing the efficacy of irradiation in the control of food spoilage is the combination of a low irradiation dose with a mild heat treatment. Promising results were reported for the shelf-life extension of mangoes and papayas, and the disinfestation of dried dates. Commercial application of the heat-irradiation treatment for some fruits is expected to follow soon. The Symposium covered other topics, such as the mechanisms of sensitization of microorganisms by physical and chemical agents, improvement of the microbiological quality of foods by combination processes, and the aspects of the wholesomeness and legislation of the food irradiation process. A key issue in the general discussion was the recommendation on the acceptability of food irradiated up to an overall average dose of 10 kGy. This important recommendation had been achieved at a recently convened Joint FAO/IAEA/WHO Expert Committee on the Wholesomeness of Irradiated Foods (27 October - 3 November 1980, Geneva). The breakthrough on the toxicological acceptability constitutes a firm basis for going ahead speedily with the development of practical applications of food irradiation, which should take its rightful place among other food preservation methods in helping to provide more and better food to a world in need. The sponsoring organizations hope that the publication of these proceedings will encourage further research and development of food irradiation to the benefit of mankind.

Facts about food irradiation. A series of fact sheets from the International Consultative Group on Food Irradiation

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-12-01

The safety and benefits of foods processed by ionizing radiation are well documented. In an effort to provide governments, especially those of developing countries, with scientifically accurate information on issues of general interest to the public, the International Consultative Group on Food Irradiation (ICGFI), which was established under the aegis of the Food and Agriculture Organization of the United Nations (FAO), the World Health Organization (WHO), and the IAEA, decided at its 7th Annual Meeting in Rome, Italy, on October 1990, to issue a series of ''Fact Sheets'' on the subject. ICGFI, an inter-governmental body with a membership of 37 governments, has as one of its mandates the function to provide information to Member States of the FAO, WHO, and IAEA and to the three organizations themselves on the safe and proper use of food irradiation technology. The Fact Sheets included here cover issues relating to: status and trends; scientific and technical terms; food irradiation and radioactivity; chemical changes in irradiated food; nutritional quality of irradiated foods; genetic studies; microbiological safety of irradiated food; irradiation and food safety; irradiation and food additives and residues; packaging of irradiated foods; safety of irradiation facilities; controlling the process; food irradiation costs; and irradiated foods and the consumer. The Fact Sheets have been separately indexed and included in the INIS Database under Reference Numbers 23011206-23011217, 23011319 and 23012743. The Fact Sheets were first issued by the ICGFI Secretariat (Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture, Vienna, Austria) in May 1991.

Facts about food irradiation. A series of fact sheets from the International Consultative Group on Food Irradiation

International Nuclear Information System (INIS)

1991-12-01

The safety and benefits of foods processed by ionizing radiation are well documented. In an effort to provide governments, especially those of developing countries, with scientifically accurate information on issues of general interest to the public, the International Consultative Group on Food Irradiation (ICGFI), which was established under the aegis of the Food and Agriculture Organization of the United Nations (FAO), the World Health Organization (WHO), and the IAEA, decided at its 7th Annual Meeting in Rome, Italy, on October 1990, to issue a series of ''Fact Sheets'' on the subject. ICGFI, an inter-governmental body with a membership of 37 governments, has as one of its mandates the function to provide information to Member States of the FAO, WHO, and IAEA and to the three organizations themselves on the safe and proper use of food irradiation technology. The Fact Sheets included here cover issues relating to: status and trends; scientific and technical terms; food irradiation and radioactivity; chemical changes in irradiated food; nutritional quality of irradiated foods; genetic studies; microbiological safety of irradiated food; irradiation and food safety; irradiation and food additives and residues; packaging of irradiated foods; safety of irradiation facilities; controlling the process; food irradiation costs; and irradiated foods and the consumer. The Fact Sheets have been separately indexed and included in the INIS Database under Reference Numbers 23011206-23011217, 23011319 and 23012743. The Fact Sheets were first issued by the ICGFI Secretariat (Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture, Vienna, Austria) in May 1991

Current status of international cooperation on nuclear safety research

International Nuclear Information System (INIS)

Katsuragi, Satoru

1984-01-01

JAERI (Japan Atomic Energy Research Institute), as a representative organization in Japan, has been participating in many international cooperations on nuclear safety research. This report reviews the recent achievement and evolution of the international cooperative safety studies. Twelve projects that are based on the agreements between JAERI and foreign organizations are reviewed. As the fuel irradiation studies, the recent achievement of the OECD Halden Reactor Project and the agreement between Pacific Northwest Laboratories, Battelle Memorial Institute, and JAERI are explained. As for the study of reactivity accident, the cooperation of the NSRR (Nuclear Safety Research Reactor) project in Japan with PBF, PNS and PHEBUS projects in the U.S., West Germany and France, respectively, are now in progress. The fuel performance in abnormal transient and the experiment and analysis of severe fuel damage are the new areas of international interest. The OECD/LOFT project and ROSA-4 projects are also explained in connection with the FP source term problem and the analysis codes such as RELAP-5 and TRAC. As the safety studies associated with the downstream of the nuclear fuel cycle, the BEFAST project of IAEA and the ISIRS project of OECD/NEA are shortly reviewed. (Aoki, K.)

Design and fabrication of irradiation testing capsule for research reactor materials

International Nuclear Information System (INIS)

Yang, Seong Woo; Kim, Bong Goo; Park, Seung Jae; Cho, Man Soon; Choo, Kee Nam; Oh, Jong Myeong; Choi, Myeong Hwan; Lee, Byung Chul; Kang, Suk Hoon; Kim, Dae Jong; Chun, Young Bum; Kim, Tae Kyu

2012-01-01

Recently, the demand of research reactors is increasing because there are many ageing research reactors in the world. Also, the production of radioisotope related with the medical purpose is very important. Korea Atomic Energy Research Institute (KAERI) is designing and licensing for Jordan Research and Training Reactor (JRTR) and new type research reactor for export which will be constructed in Amman, Jordan and Busan, Korea, respectively. Thus, It is expected that more research reactors will be designed and constructed by KAERI. To design the research reactor, the irradiation performance and behavior of core structure material are necessary. However, the irradiation behavior of these materials is not yet investigated. Therefore, the irradiation performance must be verified by irradiation test. 11M 20K and 11M 21K irradiation capsules were designed and fabricated to conduct the irradiation test for some candidate core materials, Zircaloy 4, beryllium, and graphite, at HANARO. In this paper, the design and fabrication features of 11M 20K and 11M 21K were discussed

Design and fabrication of irradiation testing capsule for research reactor materials

Energy Technology Data Exchange (ETDEWEB)

Yang, Seong Woo; Kim, Bong Goo; Park, Seung Jae; Cho, Man Soon; Choo, Kee Nam; Oh, Jong Myeong; Choi, Myeong Hwan; Lee, Byung Chul; Kang, Suk Hoon; Kim, Dae Jong; Chun, Young Bum; Kim, Tae Kyu [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2012-10-15

Recently, the demand of research reactors is increasing because there are many ageing research reactors in the world. Also, the production of radioisotope related with the medical purpose is very important. Korea Atomic Energy Research Institute (KAERI) is designing and licensing for Jordan Research and Training Reactor (JRTR) and new type research reactor for export which will be constructed in Amman, Jordan and Busan, Korea, respectively. Thus, It is expected that more research reactors will be designed and constructed by KAERI. To design the research reactor, the irradiation performance and behavior of core structure material are necessary. However, the irradiation behavior of these materials is not yet investigated. Therefore, the irradiation performance must be verified by irradiation test. 11M 20K and 11M 21K irradiation capsules were designed and fabricated to conduct the irradiation test for some candidate core materials, Zircaloy 4, beryllium, and graphite, at HANARO. In this paper, the design and fabrication features of 11M 20K and 11M 21K were discussed.

Irradiation facilities for materials research: IFMIF and small scale installations

International Nuclear Information System (INIS)

Perlado, J. M.; Victoria, M.

2007-01-01

The research of advance materials in nuclear fields such as new fission reactors (Generation-IV), Accelerator Driven Systems for Transmutation of Radioactive Wastes and Nuclear Fusion, is becoming very much common in the types of low activation and radiation resistant Materials. Ferritic-Martensitic Steels (based in 9-12 Cr) with or without Oxide Dispersion Techniques (Ytria Nanoparticles), Composites materials are becoming the new generation to answer requirements of high temperature, high radiation resistance of structural materials. Special dedication is appearing in general research programmes to this area of Materials. The understanding of their final performance needs a wider knowledge of the mechanisms of radiation damage in these materials from the atomistic scale to the macroscopic responses. New extensive campaigns are being funded to irradiate from simple elements to model alloys and finally the complex materials themselves. That sequence and its state of art will be presented One clear technique for that understanding is the Multi scale Modelling which includes simulation techniques from quantum mechanics, molecular dynamics, defects diffusion, mesoscopic modelling and finally the macroscopic constitutive relations for macroscopic analysis. However, in each one of these steps is necessary a systematic and well established program of experiments that combines the irradiation and the very detailed analysis with techniques such as Transmission Electron Microscope, Positron Annihilation, SIMS, Atom Probe, Nanoindebntation. A key aspect that wants to be presented in this work is the state of art and discussion of Irradiation Facilities for Materials studies. Those facilities goes from ion implantation sources, small accelerator, Experimental Reactors such High Flux Reactor, sophisticated Triple Beams Sources as JANNUS in France to generate at the same time displacements-hydrogen-helium, and projected very large neutron installation such as IFMIF. The role to

Investigation of food irradiation technology for application to plant quarantine. Working group report of food irradiation technology

Energy Technology Data Exchange (ETDEWEB)

Sunaga, Hiromi; Ito, Hitoshi; Takatani, Yasuyuki; Takizawa, Haruki; Yotsumoto, Keiichi; Tanaka, Ryuichi [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment; Hirano, Tsuyoshi; Tokunaga, Okihiro

1999-06-01

The commercialization of food irradiation in Japan was started in 1973 for the sprout inhibition of potatoes as the first successful food irradiation facility in the world. Since approval of potato irradiation, no items has been commercialized in Japan. However, international agreement for phase out of methyl bromide after 2005 and increasing incidences of foodborn diseases such as by Escherichia coli O157:H7 are forcing to have interesting to food irradiation. Takasaki Radiation Chemistry Research Establishment has long experiences on research of irradiation effect and engineering of food irradiation in Japan. From these back ground, working group of food irradiation was organized at August 1997 by some members of Department of Radiation Research for Environment and Resources and Advanced Technology Center for supporting technically on commercialization of food irradiation. This report presents the result of discussion in working group on generalization up to date researches of food irradiation, application fields and items, technical problems and future prospects of this technology in Japan. (author)

Policy plan for the early approval for irradiated meat products and the promotion of irradiated meats in market

Energy Technology Data Exchange (ETDEWEB)

Lee, Ju Woon [Team for Radiation Food Science and Biotechnology, Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, Jeongeup (Korea, Republic of); Kim, Wang Geun [Ministry of Education, Science and Technology, Seoul (Korea, Republic of); Kim, Kyong Su [Dept. of Food and Nutrition, Chosun University, Gwangju (Korea, Republic of); Yook, Hong Sun [Dept. of Food and Nutrition, Chungnam National University, Daejeon (Korea, Republic of); Kim, Cheon Jei [Division of Animal Life Science, Konkuk University, Seoul (Korea, Republic of)

2008-11-15

The consumption of meat products is gradually being increased by the development of livestock raising technology, industrialized farm management and international trade. This increased consumption also created new market for ready-to-eat and ready-to-cook meat products. However, these convenience meat products can be easily contaminated during the processing and storage by pathogens, and there have been many reported cases of food borne illness by meats. One of the most effective methods for the decontamination of meat products is the radiation technology. Food irradiation was the established, well-recognized and safe sterilization method. Many other countries researched the effect of irradiation on the meat products and approved the irradiation. In this article, the effectiveness, the international acceptance, the economics and the research trend of irradiation on meat products have been reviewed. Also, the policy plans for the early approval of the irradiated meat products in Korea and the promotion policy of irradiated meats in market were discussed.

Policy plan for the early approval for irradiated meat products and the promotion of irradiated meats in market

International Nuclear Information System (INIS)

Lee, Ju Woon; Kim, Wang Geun; Kim, Kyong Su; Yook, Hong Sun; Kim, Cheon Jei

2008-01-01

The consumption of meat products is gradually being increased by the development of livestock raising technology, industrialized farm management and international trade. This increased consumption also created new market for ready-to-eat and ready-to-cook meat products. However, these convenience meat products can be easily contaminated during the processing and storage by pathogens, and there have been many reported cases of food borne illness by meats. One of the most effective methods for the decontamination of meat products is the radiation technology. Food irradiation was the established, well-recognized and safe sterilization method. Many other countries researched the effect of irradiation on the meat products and approved the irradiation. In this article, the effectiveness, the international acceptance, the economics and the research trend of irradiation on meat products have been reviewed. Also, the policy plans for the early approval of the irradiated meat products in Korea and the promotion policy of irradiated meats in market were discussed

Egypt's policy concerning food irradiation research and technology

International Nuclear Information System (INIS)

Roushdy, H.M.

1978-01-01

The paper reviews current research in Egypt in the field of radiation preservation of food to accumulate the necessary data for drafting Egypts' policy towards prospects for application. Research activities in Egypt have been oriented to solving problems of local economic importance, e.g. inhibition of sprouting in potatoes, onions and garlic, extension of shelf-life of vegetables and fruits, disinfestation of stored grains and grain products, preservation of meat, meat products, fish, fats and oils, and elimination of parasites and microorganisms from animal feed. Extensive studies have been performed to determine the lowest radiation level required for short-term storage, changes in organoleptic, physical, chemical and microbiological values of irradiated food and wholesomeness studies to give evidence of the safety of irradiated food for human consumption. The paper summarizes Egypt's national planning for the transfer of such new technology, the establishment of the National Centre for Radiation Research and Technology to build up the national infrastructure for food irradiation research and application, and the formation of a Supreme Committee for Radiation Preservation of Food. Finally, the paper also surveys the locally available irradiators and correlates the design, capacity and capital cost against the actual needs of Egypt and the experience acquired. (author)

Biological samples positioning device for irradiations on a radial channel at the nuclear research reactor

International Nuclear Information System (INIS)

Rodriguez Gual, Maritza; Mas Milian, Felix; Deppman, Airton; Pinto Coelho, Paulo Rogerio

2010-01-01

For the demand of an experimental device for biological samples positioning system for irradiations on a radial channel at the nuclear research reactor in operation was constructed and started up a device for the place and remove of the biological samples from the irradiation channels without interrupting the operation of the reactor. The economical valuations are effected comparing with another type of device with the same functions. This work formed part of an international project between Cuba and Brazil that undertook the study of the induced damages by various types of ionizing radiation in DNA molecules. Was experimentally tested the proposed solution, which demonstrates the practical validity of the device. As a result of the work, the experimental device for biological samples irradiations are installed and operating in the radial beam hole No3(BH3) for more than five years at the IEA-R1 Brazilian research reactor according to the solicited requirements the device. The designed device increases considerably the type of studies can be conducted in this reactor. Its practical application in research taking place in that facility, in the field of radiobiology and dosimetry, and so on is immediate

Tropical Fruit Irradiation-From Research to Commercial Application

International Nuclear Information System (INIS)

Moy, James H.

2005-09-01

Food irradiation is an emerging technology for the 21st century. Extensive research and development worldwide in the past 40 years have proved the versatility and efficacy. With low, medium to high dose, and using either a gamma, electrons, or x-ray source, radiation can: 1) disinfest plant products and spices; 2) extend shelf life of tubers, bulbs, and selected tropical fruits; 3) decontaminate meats and seafood; 4) sterilize spices and special meals; and 5) improve product utilization. Criteria for testing its efficacy include effectiveness, efficiency, and the ability to retain product quality. The use of irradiation as a quarantine treatment of tropical fruits is potentially attractive to countries growing these fruits. A two-prong research plan should aim at proving radiation's effectiveness in preventing emergence of all insect pests that might be on a fruit, and determining that all quality attributes of a host fruit are retained after irradiation, subsequent storage and shipment. ommercial application involves conducting an economical feasibility study; market research and testing; selection of radiation source and irradiator type; training of personnel for plant operations, radiation safety and dosimetry monitoring; designing of packages and choosing the most cost-effective means of transporting treated fruits to market destinations. When all of hese are achieved, it should lead to a continuous and profitable operation. Researchers at the University of Hawaii using a gamma irradiator from the mid-1960s to early 2000s had amassed a volume of data to prove the efficacy of radiation disinfestations. And installation of a commercial x-ray irradiator in 2000 on the Island of Hawaii has enabled fruit farmers and packers to use this technology for exporting tropical fruits to distant markets

MCNPX calculations of dose rate distribution inside samples treated in the research gamma irradiating facility at CTEx

Energy Technology Data Exchange (ETDEWEB)

Rusin, Tiago; Rebello, Wilson F.; Vellozo, Sergio O.; Gomes, Renato G., E-mail: tiagorusin@ime.eb.b, E-mail: rebello@ime.eb.b, E-mail: vellozo@cbpf.b, E-mail: renatoguedes@ime.eb.b [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil). Dept. de Engenharia Nuclear; Vital, Helio C., E-mail: vital@ctex.eb.b [Centro Tecnologico do Exercito (CTEx), Rio de Janeiro, RJ (Brazil); Silva, Ademir X., E-mail: ademir@con.ufrj.b [Universidade Federal do Rio de Janeiro (PEN/COPPE/UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-Graduacao de Engenharia. Programa de Engenharia Nuclear

2011-07-01

A cavity-type cesium-137 research irradiating facility at CTEx has been modeled by using the Monte Carlo code MCNPX. The irradiator has been daily used in experiments to optimize the use of ionizing radiation for conservation of many kinds of food and to improve materials properties. In order to correlate the effects of the treatment, average doses have been calculated for each irradiated sample, accounting for the measured dose rate distribution in the irradiating chambers. However that approach is only approximate, being subject to significant systematic errors due to the heterogeneous internal structure of most samples that can lead to large anisotropy in attenuation and Compton scattering properties across the media. Thus this work is aimed at further investigating such uncertainties by calculating the dose rate distribution inside the items treated such that a more accurate and representative estimate of the total absorbed dose can be determined for later use in the effects-versus-dose correlation curves. Samples of different simplified geometries and densities (spheres, cylinders, and parallelepipeds), have been modeled to evaluate internal dose rate distributions within the volume of the samples and the overall effect on the average dose. (author)

MCNPX calculations of dose rate distribution inside samples treated in the research gamma irradiating facility at CTEx

International Nuclear Information System (INIS)

Rusin, Tiago; Rebello, Wilson F.; Vellozo, Sergio O.; Gomes, Renato G.; Silva, Ademir X.

2011-01-01

A cavity-type cesium-137 research irradiating facility at CTEx has been modeled by using the Monte Carlo code MCNPX. The irradiator has been daily used in experiments to optimize the use of ionizing radiation for conservation of many kinds of food and to improve materials properties. In order to correlate the effects of the treatment, average doses have been calculated for each irradiated sample, accounting for the measured dose rate distribution in the irradiating chambers. However that approach is only approximate, being subject to significant systematic errors due to the heterogeneous internal structure of most samples that can lead to large anisotropy in attenuation and Compton scattering properties across the media. Thus this work is aimed at further investigating such uncertainties by calculating the dose rate distribution inside the items treated such that a more accurate and representative estimate of the total absorbed dose can be determined for later use in the effects-versus-dose correlation curves. Samples of different simplified geometries and densities (spheres, cylinders, and parallelepipeds), have been modeled to evaluate internal dose rate distributions within the volume of the samples and the overall effect on the average dose. (author)

Experiences of an international trade action with irradiated onions between GDR and Hungary

International Nuclear Information System (INIS)

Zachariev, G.; Kiss, I.; Luther, T.; Huebner, G.; Doellstaedt, R.

1988-01-01

Extensive work has been carried out in the field of food irradiation in the GDR and Hungary in recent years. The irradiation of onions for sprout inhibition has reached a commercial stage in the GDR of more than 5,000 tons in 1986. The export of onions is the first example of international trade in irradiated food between socialist countries. Experiences of this trade is presented in the paper. Results of quality control of the bulbs (losses in weight an quality) after an intermediate storage period are discussed. Hungarian consumer reactions to irradiated onions is also evaluated. (author)

Research and materials irradiation reactors

International Nuclear Information System (INIS)

Ballagny, A.; Guigon, B.

2004-01-01

Devoted to the fundamental and applied research on materials irradiation, research reactors are nuclear installations where high neutrons flux are maintained. After a general presentation of the research reactors in the world and more specifically in France, this document presents the heavy water cooled reactors and the water cooled reactors. The third part explains the technical characteristics, thermal power, neutron flux, operating and details the Osiris, the RHF (high flux reactor), the Orphee and the Jules Horowitz reactors. The last part deals with the possible utilizations. (A.L.B.)

Development of a Low Temperature Irradiation Capsule for Research Reactor Materials

International Nuclear Information System (INIS)

Choo, Kee Nam; Cho, Man Soon; Lee, Cheol Yong; Yang, Sung Woo; Shin, Yoon Taek; Park, Seng Jae; Kang, Suk Hoon; Kang, Young Hwan; Park, Sang Jun

2013-01-01

A new capsule design was prepared and tested at HANARO for a neutron irradiation of core materials of research reactors as a part of the research reactor development project. Irradiation testing of the materials including graphite, beryllium, and zircaloy-4 that are supposed to be used as core materials in research reactors was required for irradiation at up to 8 reactor operation cycles at low temperature (<100 .deg. C). Therefore, three instrumented capsules were designed and fabricated for an evaluation of the neutron irradiation properties of the core materials (Graphite, Be, Zircaloy-4) of research reactors. The capsules were first designed and fabricated to irradiate materials at low temperature (<100 .deg. C) for a long cycle of 8 irradiation cycles at HANARO. Therefore, the safety of the new designed capsule should be fully checked before irradiation testing. Out-pile performance and endurance testing before HANARO irradiation testing was performed using a capsule under a 110% condition of a reactor coolant flow amount. The structural integrity of the capsule was analyzed in terms of a vibration-induced fatigue cracking of a rod tip of the capsule that is suspected to be the most vulnerable part of a capsule. Another two capsules were irradiated at HANARO for 4 cycles, and one capsule was transferred to a hot cell to examine the integrity of the rod tip of the capsule. After confirming the soundness of the 4 cycle-irradiated capsule, the remaining capsule was irradiated at up to 8 cycles at HANARO. Based on the structural integrity analysis of the capsule, an improved capsule design will be suggested for a longer irradiation test at HANARO

Internal friction measurements of Mo after low-temperature proton irradiation

International Nuclear Information System (INIS)

Tanimoto, H.; Mizubayashi, H.; Masuda, R.; Okuda, S.; Tagishi, Y.

1992-01-01

Internal friction measurements are performed in Mo after 20 MeV proton irradiation in order to clarify the behavior of self-interstitial atoms (SIA's) in Mo. In the low dose range, strong dislocation pinning suggesting the free migration of defects is observed at about 40 K and weak pinning at about 25 K. The features are very similar to those reported after neutron irradiation except that the 25 K pinning is much smaller after proton irradiation. The result suggests that the migration of free SIA's is responsible for the 40 K pinning and that of SIA-defect clusters, probably di-SIA's, formed during irradiation for the 25 K pinning. In the high dose range, the relaxation peaks are observed at about 13 and 41 K, where the close similarities are found between the present peaks and the corresponding peaks reported after neutron irradiation except that the peak height of the 41 K peak per unit concentration of Frenkel pairs (FP) tends to increase strongly with decreasing dose here. The latter fact suggests the strong interaction between SIA's. Then the smallness of the 41 K peak reported after electron irradiation with very high dose could be explained by an increased interaction between SIA's, but not by the two-dimensional migration of SIA's as proposed by Jacques and Robrock. Deformation given prior to irradiation causes a drastic decrease in the modulus defects associated with FP's (so-called bulk effect) and in the 13 K peak height. After neutron irradiation, no such effect of deformation was reported. A possible origin for this difference is discussed. (orig.)

Irradiation, annealing, and reirradiation research in the ORNL heavy-section steel irradiation program

International Nuclear Information System (INIS)

Nanstad, R.K.; Iskander, S.K.; McCabe, D.E.; Sokolov, M.A.

1997-01-01

One of the options to mitigate the effects of irradiation on reactor pressure vessels (RPV) is to thermally anneal them to restore the toughness properties that have been degraded by neutron irradiation. This paper summarizes experimental results from work performed as part of the Heavy-Section Steel Irradiation (HSSI) Program managed by Oak Ridge National Laboratory (ORNL) for the U.S. Nuclear Regulatory Commission. The HSSI Program focuses on annealing and re-embrittlement response of materials which are representative of those in commercial RPVs and which are considered to be radiation-sensitive. Experimental studies include (1) the annealing of materials in the existing inventory of previously irradiated materials, (2) reirradiation of previously irradiated/annealed materials in a collaborative program with the University of California, Santa Barbara (UCSB), (3) irradiation/annealing/reirradiation of U.S. and Russian materials in a cooperative program with the Russian Research Center-Kurchatov Institute (RRC-KI), (4) the design and fabrication of an irradiation/anneal/reirradiation capsule and facility for operation at the University of Michigan Ford Reactor, (5) the investigation of potential for irradiation-and/or thermal-induced temper embrittlement in heat-affected zones (HAZs) of RPV steels due to phosphorous segregation at grain boundaries, and (6) investigation of the relationship between Charpy impact toughness and fracture toughness under all conditions of irradiation, annealing, and reirradiation

The future Jules Horowitz material test reactor: A major European research infrastructure for sustaining the international irradiation capacity

International Nuclear Information System (INIS)

Parrat, D.; Bignan, G.; Chauvin, J.; Gonnier, C.

2011-01-01

Multipurpose experimental reactors are now key infrastructures, in complement of prediction capabilities gained thanks to progresses in the modelling, for supporting nuclear energy in terms of safety, ageing management, innovation capacity, economical performances and training. However the European situation in this field is characterized by ageing large infrastructures, which could face to operational issues in the coming years and could jeopardize the knowledge acquisition and the nuclear product qualification. Moreover some specific supplies related to the public demand could be strongly affected (e.g. radiopharmaceutical targets). To avoid a lack in the experimental capacity offer at the European level, the CEA has launched the Jules Horowitz material test reactor (JHR) international program, in the frame of a Consortium gathering EDF (FR), AREVA (FR), the European Commission (EU), SCK.CEN (BE), VTT (FI), CIEMAT (SP), VATTENFALL (SE), UJV (CZ), JAEA (JP) and the DAE (IN). The JHR will be a 100 MW tank pool reactor and will have several experimental locations either inside the reactor core or outside the reactor tank in a reflector constituted by beryllium blocks. Excavation works started mid-2007 on the CEA Cadarache site in the southeast of France. After the construction permit delivery gained in September 2007, building construction began at the beginning of 2009. Reactor start-up is scheduled in 2016. The JHR is designed to offer up-to-date irradiation experimental capabilities for studying nuclear material and fuel behaviour under irradiation in a modern safety frame, mainly due to: 1) High values of fast and thermal neutron fluxes in the core and high thermal neutron flux in the reflector (producing typically twice more material damages per year than available today in European MTRs); 2) A large variety of experimental devices capable to reproduce environment conditions of mainly light water reactors (LWRs) and sodium fast reactors; 3) Several equipment

New solar irradiances for use in space research

Science.gov (United States)

Tobiska, W.; Bouwer, D.; Jones, A.

Space environment research applications require solar irradiances in a variety of time scales and spectral formats We describe the development of research grade modeled solar irradiances using four models and systems that are also used for space weather operations The four models systems include SOLAR2000 S2K SOLARFLARE SFLR APEX and IDAR which are used by Space Environment Technologies SET to provide solar irradiances from the soft X-rays through the visible spectrum SFLR uses the GOES 0 1--0 8 nm X-rays in combination with a Mewe model subroutine to provide 0 1--30 0 nm irradiances at 0 1 nm spectral resolution at 1 minute time resolution and in a 6-hour XUV--EUV spectral solar flare evolution forecast with a 7 minute latency and a 2 minute cadence These irradiances have been calibrated with the SORCE XPS observations and we report on the inclusion of these irradiances in the S2K model There are additional developments with S2K that we discuss particularly the method by which S2K is emerging as a hybrid model empirical plus physics-based and real-time data integration platform Numerous new solar indices have been recently developed for the operations community and we describe their inclusion in S2K The APEX system is a real-time data retrieval system developed under contract to the University of Southern California Space Sciences Center SSC to provide SOHO SEM data processing and distribution SSC provides the updated SEM data to the research community and SET provides the operational data to the space operations community We

Recent world-wide advances in irradiation of food and its identification

International Nuclear Information System (INIS)

Uchiyama, Sadao; Saito, Yukio

1991-01-01

Irradiation (ionizing radiation) of various foods is growing in popularity internationally. For example, it is used as a substitute for the use of post-harvest pesticides. This trend has served to intensify research on the identification of irradiated foods. The first Research Co-ordinated Meeting on Analytical Detection Method for Irradiated Foods was held in Poland under the sponsorship of FAO/IAEA in 1990 in order to solve problems related to the international trade of irradiated foods and to ensure their correct labelling in the market. In this review, the world-wide advances in the irradiation of food and its identification are introduced and discussed. (author)

Effects of Si3+ and H+ Irradiation on Tungsten Evaluated by Internal Friction Method

International Nuclear Information System (INIS)

Hu Jing; Wang Xianping; Fang Qianfeng; Liu Changsong; Zhang Yanwen; Zhao Ziqiang

2013-01-01

Effects of Si 3+ and H + irradiation on tungsten were investigated by internal friction (IF) technique. Scanning electron microscope (SEM) analysis revealed that sequential dual Si+H irradiation resulted in more serious damage than single Si irradiation. After irradiation, the IF background was significantly enhanced. Besides, two obvious IF peaks were initially found in temperature range of 70∼330 K in the sequential Si+H irradiated tungsten sample. The mechanism of increased IF background for the irradiated samples was suggested to originate from the high density dislocations induced by ion irradiation. On the other hand, the relaxation peak P L and non-relaxation peak P H in the Si+H irradiated sample were ascribed to the interaction process of hydrogen atoms with mobile dislocations and transient processes of hydrogen redistribution, respectively. The obtained experimental results verified the high sensitivity of IF method on the irradiation damage behaviors in nuclear materials

IFMIF - International Fusion Materials Irradiation Facility Conceptual Design Activity/Interim Report

International Nuclear Information System (INIS)

Rennich, M.J.

1995-12-01

Environmental acceptability, safety, and economic viability win ultimately be the keys to the widespread introduction of fusion power. This will entail the development of radiation- resistant and low- activation materials. These low-activation materials must also survive exposure to damage from neutrons having an energy spectrum peaked near 14 MeV with annual radiation doses in the range of 20 displacements per atom (dpa). Testing of candidate materials, therefore, requires a high-flux source of high energy neutrons. The problem is that there is currently no high-flux source of neutrons in the energy range above a few MeV. The goal, is therefore, to provide an irradiation facility for use by fusion material scientists in the search for low-activation and damage-resistant materials. An accellerator-based neutron source has been established through a number of international studies and workshops' as an essential step for materials development and testing. The mission of the International Fusion Materials Irradiation Facility (IFMIF) is to provide an accelerator-based, deuterium-lithium (D-Li) neutron source to produce high energy neutrons at sufficient intensity and irradiation volume to test samples of candidate materials up to about a full lifetime of anticipated use in fusion energy reactors. would also provide calibration and validation of data from fission reactor and other accelerator-based irradiation tests. It would generate material- specific activation and radiological properties data, and support the analysis of materials for use in safety, maintenance, recycling, decommissioning, and waste disposal systems

15 years of existence of the International Consultative Group on Food Irradiation (ICGFI)

International Nuclear Information System (INIS)

Ehlermann, D.A.E.

1999-01-01

The ICGFI essentially contributed to international dissemination of unbiased information about the advantages and risks of food irradiation. The body has issued ICGFI publications containing codes of good practice for a variety of purposes, as eg. for operation of irradiation facilities for the treatment of food (GIP), or guidelines for due handling of irradiated food (GMP). Training courses have been offered to scientists, especially from developing countries, as well as for inspectors of national supervisory authorities. The activities of the advisory group as well as the conditions governing future activities are discussed. (orig./CB) [de

The researches on the effects of low doses irradiation

International Nuclear Information System (INIS)

2009-02-01

All research conducted as part of 'Risc-Rad' and those conducted by actors in international programs on low doses allow progress in understanding mechanisms of carcinogenesis associated with irradiation. The data do not question the use in radiation protection, risk estimation models based on a linear increase of the risk with the dose of radiation. Nevertheless, they show that the nature of biological responses induced by low doses of radiation has differences with the responses induced by high doses of radiation. They also show the diversity of effects/dose relationships as the mechanism observed and the importance of genetic predisposition in the individual sensitivity to low doses of radiation. It is therefore essential to continue to bring new data to better understand the complex biological effects and their impact on the establishment of radiation protection standards. In addition, the results have often been at the cellular level. The diversity of responses induced by radiations is also a function of cell types observed, the aging of cells and tissue organization. It is essential to strengthen researches at the tissue and body level, involving in vitro and in vivo approaches while testing the hypothesis in epidemiology with a global approach to systems biology. Over the past four years, the collaboration between partners of 'Risc-Rad' using experimental biology approaches and those using mathematical modeling techniques aimed at developing a new model describing the carcinogenesis induced by low radiation doses. On an other hand, The High level expert group on European low dose risk research (H.L.E.G.) develop programmes in the area of low dose irradiation (Germany, Finland, France, Italy and United Kingdom). It proposed a structure of trans national government called M.E.L.O.D.I. ( multidisciplinary european low dose initiative). Its objective is to structure and integrate European research by gathering around a common programme of multidisciplinary

Food Irradiation Newsletter. Vol. 15, no. 1

International Nuclear Information System (INIS)

1991-05-01

This Newsletter contains reports of the Final FAO/IAEA Research Coordination Meeting (RCM) on the Latin American Regional Cooperative Programme on Food Irradiation, the first FAO/IAEA RCM of the Research Coordination Programme on Analytical Detection Methods for Irradiation Treatment of Foods, and the final FAO/IAEA RCM on the Use of Irradiation as a Quarantine Treatment of Food and Agriculture Commodities. Also included are excerpts of the Seventh Annual Meeting of the International Consultative Group on Food Irradiation (ICGFI) and a summary of an ICGFI Task Force Meeting on Irradiation as a Quarantine Treatment of Fresh Fruits and Vegetables. The new regulations on food irradiation in the United Kingdom, effective 1 January 1991, are summarized

The irradiation of volunteers in medical research

International Nuclear Information System (INIS)

Rae, S.

1976-01-01

Attempts to produce guidelines for use in medical research involving the irradiation of volunteers are surveyed. The recommendations of the British Institute of Radiology (Irradiation of Human Subjects for Medical Research, Bull. Brit. Radiology, 1975, vol.1, no.2, 4) are summarized. These recommendations, based on a preliminary working document produced by the World Health Organization, are considered in three parts, the selection of subjects, the categorisation and the approval of research projects. The importance of freely given and informed consent is emphasized. The suggested four categories of project are classified by the amount of total body radiation to be received by the subject in each project, and the necessary assessment and prior approval procedures are related to this classification. The imposition of a lifetime exposure limit is compared with occupational exposures which are assessed on an annual basis, and the ICRP's 'planned special exposures'. Repeated irradiation of the same subject, although permissible within the recommended limits, may create difficulties. The total lifetime accumulated dose may not always be immediately available if the subject has worked in a number of different establishments. The possibility of compiling an approved list of procedures to reduce some of the anticipated delays in processing applications is discussed. (author)

Early radiation changes of normal dog brain following internal and external brain irradiation: A preliminary report

International Nuclear Information System (INIS)

Chin, H.; Maruyama, Y.; Markesbery, W.; Goldstein, S.; Wang, P.; Tibbs, P.; Young, B.; Feola, J.; Beach, L.

1984-01-01

To examine radiation-induced changes in the normal brain, internal or external radiation was given to normal dog brain. Seven medium-sized dogs were used in this study. Two dogs were controls and an ice-pick (plastic implant applicator) was placed in the right frontal lobe for about 5 hours but no irradiation. Two dogs underwent Cs-137 brain implantation for 4 and 5 hours, respectively using an ice-pick technique. Two dogs were given internal neutron irradiation using the same technique of intracerebral ice-pick brachytherapy. One dog received an external photon irradiation using 6-Mev Linear Accelerator. Postmortem microscopic examination was made to study the early cerebral changes to irradiation in three dogs: one control with no irradiation; one received intracerebral Cesium implantation; and one external photon irradiation. Vascular change was the most prominent microscopic finding. There were hemorrhage, endothelial proliferation and fibrinoid changes of small vessel wall. Most of the changes were localized in the white matter and the cortex remained intact. Details (CT, NMR and histological studies) are discussed

Recent progress in food irradiation in Korea

International Nuclear Information System (INIS)

Joong-ho Kwon

1988-01-01

This paper discusses progress in research into food irradiation and government approval of the process in Korea. The development of the first cobalt-60 food irradiator is described and the role of international, trade and consumer associations in its commercialization discussed. (U.K.)

Microstructural characterization and model of hardening for the irradiated austenitic stainless steels of the internals of pressurized water reactors; Caracterisation microstructurale et modelisation du durcissement des aciers austenitiques irradies des structures internes des reacteurs a eau pressurisee

Energy Technology Data Exchange (ETDEWEB)

Pokor, C

2003-07-01

The core internals of Pressurized Water Reactors (PWR) are composed of SA 304 stainless steel plates and CW 316 stainless steel bolts. These internals undergo a neutron flux at a temperature between 280 deg C and 380 deg C which modifies their mechanical properties. These modifications are due to the changes in the microstructure of these materials under irradiation which depend on flux, dose and irradiation temperature. We have studied, by Transmission Electron Microscopy, the microstructure of stainless steels SA 304, CW 316 and CW 316Ti irradiated in a mixed flux reactor (OSIRIS at 330 deg C between 0,8 dpa et 3,4 dpa) and in a fast breeder reactor at 330 deg C (BOR-60) up to doses of 40 dpa. Moreover, samples have been irradiated at 375 deg C in a fast breeder reactor (EBR-II) up to doses of 10 dpa. The microstructure of the irradiated stainless steels consists in faulted Frank dislocation loops in the [111] planes of austenitic, with a Burgers vector of [111]. It is possible to find some voids in the solution annealed samples irradiated at 375 deg C. The evolution of the dislocations loops and voids has been simulated with a 'cluster dynamic' model. The fit of the model parameters has allowed us to have a quantitative description of our experimental results. This description of the microstructure after irradiation was coupled together with a hardening model by Frank loops that has permitted us to make a quantitative description of the hardening of SA 304, CW 316 and CW 316Ti stainless steels after irradiation at a certain dose, flux and temperature. The irradiation doses studied grow up to 90 dpa, dose of the end of life of PWR internals. (author)

The future Jules Horowitz material testing reactor: An opportunity for developing international collaborations on a major European irradiation infrastructure

International Nuclear Information System (INIS)

Parrat, D.; Bignan, G.; Maugard, B.; Gonnier, C.; Blandin, C.

2015-01-01

Development process of a fuel product or a nuclear material before using at an industrial scale in a power reactor ranges from characterization of the material itself under neutronic flux up to its qualification in accidental conditions. Irradiations in Material Testing Reactors (MTRs) are in practice the basis of the whole process, in complement of prediction capabilities gained by modelling. Dedicated experimental reactors play also an important complementary role for some specific integral tests (e.g. RIA tests). Irradiations of precursors in power reactors are often limited to products which present a slight design evolution compare to the standard product or are implemented for further tests when a statistical approach is useful for defining a safety criterion. However European MTR park status is characterized by ageing infrastructures, which could cause operational issues in coming years, either on technological or on safety point of views. Moreover some specific supplies related to the public demand could be strongly affected (e.g. radiopharmaceutical targets). To avoid a lack in irradiation capacity offer at European level, CEA launched the Jules Horowitz Material Testing Reactor (JHR) international program, in the frame of a Consortium gathering also EDF (FR), AREVA (FR), European Commission (EU), SCK.CEN (BE), VTT (FI), CIEMAT (SP), STUDSVIK (SE), UJV (CZ), NNL (UK), IAEC (IL), DAE (IN) and as associated partnership: JAEA (JP). Some institutions in this list are themselves the flagship of a national Consortium. Discussions for enlarging participation are on-going with other countries, as JHR Consortium is open to new member entrance until JHR completion. The Jules Horowitz Material Testing Reactor (JHR MTR) is under construction at CEA Cadarache in southern France and will be an important international User Facility for R&D in support to the nuclear industry, research centres, regulatory bodies and TSO, and academic institutions. It represents a unique

Low temperature internal friction on γ-irradiated polyvinylidene fluoride (PVDF)

International Nuclear Information System (INIS)

Callens, A.; Eersels, L.; De Batist, R.

1978-01-01

A least-squares fitting of the below room temperature part of the internal friction spectra, obtained by the torsion pendulum technique on as-received and γ-irradiated (up to 1 Grad) strips and fibres of polyvinylidene fluoride by a superposition of single Debye functions, reveals that the spectral component features are determined not only by purely amorphous chain characteristics but also by the dose-dependence of crystallinity. A careful analysis of the relaxation spectra confirms that at least one relaxation effect (approximately 236 K) is created upon irradiation. The analysis of the dose dependence of the characteristics of the β (glass transition; approximately 220 K) and βsub(u) (apparent upper glass transition; approximately 270 K) relaxations, suggests the probable influence of crystallinity on the molecular motion in the amorphous phase. The increase of the intensity of the γ relaxation (approximately 190 K) is related to the irradiation-induced crystallite degradation. (author)

Neutron irradiation of seeds 2

Energy Technology Data Exchange (ETDEWEB)

1968-10-01

The irradiation of seeds with the fast neutron of research reactors has been hampered by difficulties in accurately measuring dose and in obtaining repeatable and comparable results. Co-ordinated research under an international program organized by the FAO and IAEA has already resulted in significant improvements in methods of exposing seeds in research reactors and in obtaining accurate dosimetry. This has been accomplished by the development of a standard reactor facility for the neutron irradiation of seeds and standard methods for determining fast-neutron dose and the biological response after irradiation. In this program various divisions of the IAEA and the Joint FAO/IAEA Division co-operate with a number of research institutes and reactor centres throughout the world. Results of the preliminary experiments were reported in Technical Reports Series No. 76, ''Neutron Irradiation of Seeds''. This volume contains the proceedings of a meeting of co-operators in the FAO/IAEA Neutron Seed Irradiation Program and other active scientists in this field. The meeting was held in Vienna from 11 to 15 December 1967. Refs, figs and tabs.

Neutron irradiation of seeds 2

International Nuclear Information System (INIS)

1968-01-01

The irradiation of seeds with the fast neutron of research reactors has been hampered by difficulties in accurately measuring dose and in obtaining repeatable and comparable results. Co-ordinated research under an international program organized by the FAO and IAEA has already resulted in significant improvements in methods of exposing seeds in research reactors and in obtaining accurate dosimetry. This has been accomplished by the development of a standard reactor facility for the neutron irradiation of seeds and standard methods for determining fast-neutron dose and the biological response after irradiation. In this program various divisions of the IAEA and the Joint FAO/IAEA Division co-operate with a number of research institutes and reactor centres throughout the world. Results of the preliminary experiments were reported in Technical Reports Series No. 76, ''Neutron Irradiation of Seeds''. This volume contains the proceedings of a meeting of co-operators in the FAO/IAEA Neutron Seed Irradiation Program and other active scientists in this field. The meeting was held in Vienna from 11 to 15 December 1967. Refs, figs and tabs

Internal friction study of neutron-irradiation effects on an amorphous Cu40Ti60 alloy

International Nuclear Information System (INIS)

Dong, Y.; Wu, G.; Xiao, K.; Li, X.; He, Y.

1988-01-01

Effects of neutron irradiation on the structure of an amorphous Cu 40 Ti 60 alloy have been studied by internal friction measurements. After irradiation, the position of the first internal friction peak remains almost unchanged and the shoulder position shifts towards a higher temperature by about 5 K, which indicates that the Cu 40 Ti 60 glass becomes more stable. These results are finally discussed based on the concept of changes of chemical short-range ordering and geometrical short-range ordering due to radiation damage

MAFF sponsored research: detection tests for irradiated food

International Nuclear Information System (INIS)

Blackburn, C.M.; Holley, P.A.; Pryke, D.C.

1993-01-01

In their 1986 report on the safety and wholesomeness of irradiated food the UK Advisory Committee on Irradiated and Novel Foods (ACINF) recognised that a generally applicable test to determine if a food had been irradiated was not available. The committee considered that, although not a pre-requisite, the existence of a detection test would be a useful supplement to a control system and do much to reassure consumers; with this in mind ACINF recommended that detection methods should be kept under review. As a consequence, in 1987 the Ministry initiated a comprehensive R and D detection test programme. Over fifty papers have been published to date as a result of this programme. MAFF (Ministry Of Agriculture Fisheries and Food) has also been involved in other research associated with irradiation and food safety, some of which is described in this paper. This paper aims to give an overview of recent work funded under the food irradiation programme. Twelve projects have been supported over the last two years, ten of which involved the development of detection tests for irradiated food. A summary of these projects is presented: - Thermoluminescence; - Electron Spin Resonance; - 2-alkylcyclobutanones; -Determination Of Hydrogen; - Differential Scanning Calorimetry; - Limulus Amoebocyte Lysate; - DNA; - Pesticide Breakdown; - Neutron Irradiation; -Future Plans. (orig./vhe)

Study of the impact of food irradiation on preventing losses: Experience in Africa. Proceedings of a final research co-ordination meeting

International Nuclear Information System (INIS)

2002-05-01

There have been positive developments on food irradiation in different regions of the world, especially in the United States of America and several Asian and Latin American countries. In some countries in Africa, this technology has been studied in the past few decades with encouraging results. To assist these countries in conducting pilot scale research and development on irradiation of specific commodities of interest to them including market testing and feasibility to establish commercial irradiators for multi-purpose application, a Coordinated Research Project (CRP) on Impact of Irradiation to Prevent Food Losses in Africa was carried out between 1995 and 1999. This CRP demonstrated that food irradiation has a potential to reduce losses of basic staple food crops including yams, dried and smoked fish, potatoes and onions through pilot scale experiments carried out in some African countries. Small scale market testing of such irradiated food such as spices, potatoes and onions showed encouraging results. In some countries (Cote d'Ivoire, Egypt, Ghana, Senegal and South Africa), it is feasible to establish commercial irradiation facilities for treating food. In Morocco, irradiation shows a potential to meet quarantine requirements in international food trade. It should be noted that commercial scale application of irradiation of some food products has been carried out in South Africa since the 1980s

Study of the impact of food irradiation on preventing losses: Experience in Africa. Proceedings of a final research co-ordination meeting

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-05-01

There have been positive developments on food irradiation in different regions of the world, especially in the United States of America and several Asian and Latin American countries. In some countries in Africa, this technology has been studied in the past few decades with encouraging results. To assist these countries in conducting pilot scale research and development on irradiation of specific commodities of interest to them including market testing and feasibility to establish commercial irradiators for multi-purpose application, a Coordinated Research Project (CRP) on Impact of Irradiation to Prevent Food Losses in Africa was carried out between 1995 and 1999. This CRP demonstrated that food irradiation has a potential to reduce losses of basic staple food crops including yams, dried and smoked fish, potatoes and onions through pilot scale experiments carried out in some African countries. Small scale market testing of such irradiated food such as spices, potatoes and onions showed encouraging results. In some countries (Cote d'Ivoire, Egypt, Ghana, Senegal and South Africa), it is feasible to establish commercial irradiation facilities for treating food. In Morocco, irradiation shows a potential to meet quarantine requirements in international food trade. It should be noted that commercial scale application of irradiation of some food products has been carried out in South Africa since the 1980s.

Present status of research on radiation utilization in 1994 at JAERI. Utilization of irradiation and RI production and utilization

International Nuclear Information System (INIS)

1994-10-01

In Japan Atomic Energy Research Institute, Takasaki Radiation Chemistry Research Establishment is in charge of the utilization of irradiation, and Tokai Research Establishment is in charge of the production and utilization of radioisotopes. As for the utilization of irradiation the development of new polymers, the development of environment preservation technology such as flue gas treatment, and by using various ion beams from four accelerators, the development of the materials used for space environment, nuclear fusion and new functional materials, the research on the radiation application to biotechnology, the development of the production and utilization of new radioisotopes have been carried out. As for the production and utilization of radioisotopes, the development of new products and new utilization techniques, the technology of producing and using a large amount of tritium, and the research on the chemical behavior of tritium have been carried out. The international cooperations have been promoted positively. In this report, the research activities in 1994 are described. (K.I.)

Canada helps build food irradiation centre

International Nuclear Information System (INIS)

Thomas, R.

1990-01-01

In a project backed by the Canadian International Development Agency, Nordion has built a new food irradiation research and development centre in Thailand, and trained Thai personnel in its operation. Consumer market tests of suitably labelled Thai irradiated foods are planned in Canada, once regulatory approval is obtained. Papayas, mangoes and shrimp are of particular interest

AGC-2 Irradiation Report

Energy Technology Data Exchange (ETDEWEB)

Rohrbaugh, David Thomas [Idaho National Lab. (INL), Idaho Falls, ID (United States); Windes, William [Idaho National Lab. (INL), Idaho Falls, ID (United States); Swank, W. David [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2016-06-01

The Next Generation Nuclear Plant (NGNP) will be a helium-cooled, very high temperature reactor (VHTR) with a large graphite core. In past applications, graphite has been used effectively as a structural and moderator material in both research and commercial high temperature gas cooled reactor (HTGR) designs.[ , ] Nuclear graphite H 451, used previously in the United States for nuclear reactor graphite components, is no longer available. New nuclear graphites have been developed and are considered suitable candidates for the new NGNP reactor design. To support the design and licensing of NGNP core components within a commercial reactor, a complete properties database must be developed for these current grades of graphite. Quantitative data on in service material performance are required for the physical, mechanical, and thermal properties of each graphite grade with a specific emphasis on data related to the life limiting effects of irradiation creep on key physical properties of the NGNP candidate graphites. Based on experience with previous graphite core components, the phenomenon of irradiation induced creep within the graphite has been shown to be critical to the total useful lifetime of graphite components. Irradiation induced creep occurs under the simultaneous application of high temperatures, neutron irradiation, and applied stresses within the graphite components. Significant internal stresses within the graphite components can result from a second phenomenon—irradiation induced dimensional change. In this case, the graphite physically changes i.e., first shrinking and then expanding with increasing neutron dose. This disparity in material volume change can induce significant internal stresses within graphite components. Irradiation induced creep relaxes these large internal stresses, thus reducing the risk of crack formation and component failure. Obviously, higher irradiation creep levels tend to relieve more internal stress, thus allowing the

Investigation of high flux test module for the international fusion materials irradiation facilities (IFMIF)

International Nuclear Information System (INIS)

Miyashita, Makoto; Sugimoto, Masayoshi; Yutani, Toshiaki

2007-03-01

This report describes investigation on structure of a high neutron flux test module (HFTM) for the International Fusion Materials Irradiation Facilities (IFMIF). The HFTM is aimed for neutron irradiation of a specimen in a high neutron flux domain of the test cell for irradiation ground of IFMIF. We investigated the overall structure of the HFTM that was able to include specimens in a rig and thermocouple arrangement, an interface of control signal and support structure. Moreover, pressure and the amount of the bend in the module vessel (a rectangular section pressure vessel) were calculated. The module vessel did a rectangular section from limitation of a high neutron flux domain. Also, we investigated damage of thermocouples under neutron irradiation, which was a temperature sensor of irradiation materials temperature control demanded high precision. Based on these results, drawings on the HTFM structure. (author)

Internal friction in Al alloys after neutron irradiation at low temperature

International Nuclear Information System (INIS)

Takamura, S.; Kobiyama, M.

1985-01-01

Internal friction and elastic modulus of dilute Al alloys have been measured after fast neutron irradiation at about 5 K. The internal friction spectra in Al-Pb, Al-Si, Al-Zn, Al-Ag, Al-Sn and Al-In are very similar. This result suggests that the configuration of the interstitial-solute atom complex in these alloys is very similar. In Al-Mg, the main complexes have the configuration with nearly symmetry, but its internal friction spectrum is different from that of the above-mentioned alloys. The internal friction spectra and their annealing behavior in Al-Be, Al-Mn, Al-Fe and Al-Cu demonstrate that the configuration of their interstitial-solute atom complex seems to be different from each other and the main complex in these alloys is immobile until stage III. (author)

Practical implications for RPV irradiation surveillance under long term operation based on latest research results

International Nuclear Information System (INIS)

Hein, H.; Keim, E.; Barthelmes, J.; Schnabel, H.

2015-01-01

The international programs CARISMA, CARINA and LONGLIFE belong to the research programs which have been performed during the last 10 years to study the irradiation behavior of RPV steels under long term operation of more than 60 years. Some characteristic but different irradiated RPV steels used in Pressurized Water Reactors have been extensively investigated in each of those three programs. Whereas the CARISMA and CARINA programs were mainly focused on material testing to study the irradiation-induced change of material properties in terms of fracture toughness, the main objective of LONGLIFE was to investigate the change of microstructure with various analysis techniques and to understand the mechanisms behind. In this way it was possible to get a comprehensive material characterization in terms of macro-physical properties and micro-structural features for a number of RPV steels which have been studied at different irradiation levels up to 8*10 19 cm -2 (E > 1 MeV). The essential macro-physical and micro-structural results are summarized, in particular regarding the impact of copper and nickel, and the neutron flux on the irradiation behavior and with respect to possible late irradiation effects under long term operation. Moreover, the change of material properties is linked with embrittlement mechanisms such as formation of element specific precipitations, segregations, and matrix defects. Well-known trend curves are also applied to the measured T 41 and T 0 data in order to assess their appropriateness for long term operation. Based on the comprehensive available data base, practical implications for RPV irradiation surveillance programs under long term operation are highlighted with respect to issues like material specific application of reference temperature concepts, data scattering, prediction of high fluence behavior and how to cope with possible late irradiation effects. Finally, best practices for RPV irradiation surveillance programs are suggested from

Irradiation's potential for preserving food

International Nuclear Information System (INIS)

Morrison, R.M.

1986-01-01

The first experimental studies on the use of ionizing radiation for the preservation of foods were published over thirty years ago (1, 2) . After a period of high expectations and perhaps exaggerated optimism a series of disappointments occurred in the late '60s .The first company specifically created to operate a food irradiation plant, Newfield Products Inc, ran into financial difficulties and had to close its potato irradiation facility in 1966. The irradiator, designed to process 15,000t of potatoes per month for inhibition of sprouting, was in operation during one season only. In 1968 the US Food an Drug Administration refused approval for radiation-sterilisation of ham and withdrew the approval it had granted in 1963 for irradiated bacon. An International Project on the Irradiation of Fruit and Fruit juices, created in 1965 at Seibersdorf, Austria, with the collaboration or 9 countries, ended with general disappointment after three years. The first commercial grain irradiator, built in the Turkish harbour town of Iskenderun by the International Atomic Energy Agency with funds from the United Nations Development Program, never received the necessary operating licence from the Turkish Government and had to be dismantled in 1968. The US Atomic Energy Commission terminated its financial support to all research programmes on food irradiation in 1970. For a number of years, little chance seemed to remain that the new process would ever be practically used. However, research and development work was continued in a number of laboratories all over the world, and it appears that the temporary setbacks now have been overcome. Growing quantities of irradiated foods are being marketed in several countries and indications are that irradiated foods will eventually be as generally accepted as are frozen, dried or heatsterilised foods

Prospects of establishing food irradiation facilities in Kenya

International Nuclear Information System (INIS)

Mustapha, A.O.; Patel, J.P.; Rathore, I.V.S.; Hashim, N.O.; Kinyua, A.M.

2001-01-01

Full text: A national project of food irradiation in the country is being proposed. At present there are no facilities for food irradiation (and food irradiation research) in Kenya. This report is therefore largely comparative between the traditional and the conventional food preservation methods on the one hand and the irradiation technique on the other. The report is also based on information from other countries where food irradiation is practiced (Kawabata, 1981) or is being also contemplated (Diop et al, 1997), as well as on the relevant report of the International Atomic Energy Agency (IAEA) on this topic (IAEA, 1993). The paper presents the statement of the research problem, i.e., in Kenya large quantities of food and other farm produces go to waste annually as a result of the inadequacies of the preservation techniques currently in use. These (other) preservation techniques, although often less controversial than the irradiation techniques, have also been found to be more expensive to run when compared to irradiation techniques. Such techniques, presently employed in Kenya, include the traditional methods (e.g. sun drying, smoke and fire drying, etc.) and modern techniques such as freezing or refrigeration, lyophilization, etc., as well as application of chemicals like insecticides and fumigants. The latter combines the disadvantages of high costs with environmental pollution and associated health risks. In this preliminary research, aimed at studying the prospects of a national food irradiation project, the following food items that are selected for their importance to the economy of the country, include potatoes, rice, maize, coffee, tea, various fruits, fish and meat. The paper also explores the economic feasibility as well as the human and technological requirements of establishing a commercial food irradiation plant, with aim of assessing the applicability of food irradiation as alternative or a complimentary approach for preservation technique in

Irradiation embrittlement of pressure vessel steels

International Nuclear Information System (INIS)

Brumovsky, M.; Vacek, M.

1975-01-01

A Standard Research Programme on Irradiation Embrittlement of Pressure Vessel Steels was approved by the Coordinating Meeting on the 12th May 1972 at the Working Group on Engineering Aspects of Irradiation Embrittlement of Pressure Vessel Steels. This Working Group was set up by the International Atomic Energy Agency in Vienna. Seven countries with their research institutes agreed on doing irradiation experiments according to the approved programme on steel A533 B from the U.S. HSST Programme. The Czechoslovak contribution covering tensile and impact testing of non-irradiated steel and steel irradiated at 280degC to 1.3 x 10 23 n/m 2 (E above 1 MeV) is presented in this report. As an additional part the same set of experiments was carried out on two additional steels - A 542 and A 543, made in SKODA Works for comparison of their irradiation embrittlement and hardening with A533 B steel. (author)

Proceedings of a seminar on food irradiation

International Nuclear Information System (INIS)

1985-07-01

International interest in the industrial use of ionizing radiation as a means of food preservation has increased rapidly following the favourable outcome of many years of intensive research on the health implications of food irradiation. The introduction in the U.S. and elsewhere of legislation restricting the use of chemical additives to foods for both human and animal consumption has contributed to this development. A high priority must be given to coordinating legislation on food irradiation within the European Community if international trade in irradiated foods is to make progress and food losses by spoilage and by insect infestation are to be minimised. Speakers from the United Kigdom, France and Germany describe the legislative and developmental situation in their respective countries. The implication for the Irish food industry is presented by scientists working on food research and development and regulatory aspects in Ireland are also discussed

Literature study of the radiobiological parameters of Caesium-137 required for evaluating internal irradiation doses as a function of age; Etude bibliographique des parametres radiobiologiques du cesium-137 necessaires a l'evaluation des doses d'irradiation interne en fonction de l'age

Energy Technology Data Exchange (ETDEWEB)

Garnier, A [Commissariat a l' Energie Atomique, 92 - Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1968-07-01

This document reassembles information published in scientific literature on radiobiological parameters of Cs-137, necessary for the estimate of the internal irradiation dose of man according to his age (during growth). The data are completed by a commented review of the mathematical models, proposed in order to value the irradiation doses from ingested cesium and the biological parameters. (author) [French] Ce document rassemble les informations publiees dans la litterature scientifique, concernant les parametres radiobiologiqueo du cesium-137, necessaires a l'evaluation des doses d'irradiation interne de l'homme en fonction de l'age. Ces donnees sont completees par une revue commentee des modeles mathematiques proposes en vue de l'evaluation des doses d'irradiation a partir des quantites de cesium ingerees et des parametres biologiques. (auteur)

MONJU AS AN INTERNATIONAL ASSET: INTERNATIONAL ASSISTANCE AND COOPERATION

International Nuclear Information System (INIS)

Rodriguez, G.; Wisner, R.S.; Stuart, R.

2004-01-01

The role of the fast breeder reactor prototype Monju has expanded to meet the challenges of the 21st century. Today instead of being merely a demonstration of an economical, safe, environmentally responsible source of energy, as originally designed, it has also the capability to be transformed into a unique International Irradiations Test Facility. The potential for Monju's role in the Generation IV nuclear energy systems development, and fast reactor research and development area is clear. Its incomparable fast neutron spectrum density will be a major interest not only for Sodium Fast Reactor but for all the Generation IV concepts. As Monju's potential future role is laid out, plans for future tests can be made. Tests of advanced fuels and materials in support of the Advanced Fuel Cycle Initiative, as well as Minor Actinide Burning can be envisaged. Tests planned on transmutation of minor actinides have the objectives of an industrial demonstration of the reduction of toxic wastes and the stewardship burden of the long-lived wastes. Tests and demonstrations carried out at Monju will provide a bridge from existing Generation III fast reactor systems, now in the later stages of their projected operational lifetimes, to Generation IV nuclear energy systems. The JNC founded the International Cooperation and Technology Development Center and the International Research Fellowship program to facilitate this international effort. The Center exists specifically to formulate and perform projects ensuring the maximum technical benefit from Monju. The staff includes physicists, engineers and nuclear industry leaders from around the world. Research Fellowships center is based on several technical areas: advanced instrumentation, inspection techniques, plant reliability and safety, nucleonics, sodium handling technologies, irradiation and experiment management and coordination and advanced post-irradiation examination capabilities and techniques. This paper describes the recent

The research on super absorption resin made from irradiated soybean

International Nuclear Information System (INIS)

Fu Lixin; Xu Dechun; Meng Lifen; Zhao Xiaonan; Hu Shaoxin; Chen Changdong

2011-01-01

The research is based on the products made from the fermentation of soybean. Using γ-ray to irradiate the products made from the fermentation of soybean to make super absorption resin, and the result is that the products irradiated by 20 KGy can absorb nearly 2000 times of its volume. (authors)

Installation of the water environment irradiation facility for the IASCC research under the BWR irradiation environment (1)

International Nuclear Information System (INIS)

Okada, Yuji; Magome, Hirokatsu; Hanawa, Hiroshi; Ohmi, Masao; Kanno, Masaru; Iida, Kazuhiro; Ando, Hitoshi; Shibata, Mitsunobu; Yonekawa, Akihisa; Ueda, Haruyasu

2013-10-01

In Japan Atomic Energy Agency, in order to solve the problem in the long-term operation of a light water reactor, preparation which does the irradiation experiment of light-water reactor fuel and material is advanced. JMTR stopped after the 165th operation cycle in August 2006, and is advancing renewal of the irradiation facility towards re-operation. This material irradiation test facility and power ramping test facility for doing the neutron irradiation test of the fuel and material for light water reactors is scheduled to be manufactured and installed between the 2008 fiscal year and the 2012 fiscal year. This report summarizes manufacture and installation of the material irradiation test facility for IASCC research carried out from the 2008 fiscal year to the 2010 fiscal year. (author)

The AIR's policy on research involving the irradiation of human subjects

International Nuclear Information System (INIS)

Smith, A.N.

1995-01-01

The policy of the Australian Institute of Radiography with regards to the human subject irradiation is outlined. It is stated that members will not irradiate another individual, nor themselves, solely for the purposes of experimentation or research without gaining the prior approval of an institutional ethics committee. Where possible, researchers should consider the use of patient equivalent or human tissue equivalent phantoms. A short list of references has been compiled to assist members in designing research protocols which comply with the stated policy

International fusion research

International Nuclear Information System (INIS)

Pease, R.S.

1983-01-01

Nuclear energy of the light elements deuterium and lithium can be released if the 100 MK degree temperature required for deuterium-tritium thermonuclear fusion reactions can be achieved together with sufficient thermal insulation for a net energy yield. Progress of world-wide research shows good prospect for these physical conditions being achieved by the use of magnetic field confinement and of rapidly developing heating methods. Tokamak systems, alternative magnetic systems and inertial confinement progress are described. International co-operation features a number of bilateral agreements between countries: the Euratom collaboration which includes the Joint European Torus, a joint undertaking of eleven Western European nations of Euratom, established to build and operate a major confinement experiment; the development of co-operative projects within the OECD/IEA framework; the INTOR workshop, a world-wide study under IAEA auspices of the next major step in fusion research which might be built co-operatively; and assessments of the potential of nuclear fusion by the IAEA and the International Fusion Research Council. The INTOR (International Tokamak Reactor) studies have outlined a major plant of the tokamak type to study the engineering and technology of fusion reactor systems, which might be constructed on a world-wide basis to tackle and share the investment risks of the developments which lie ahead. This paper summarizes the recent progress of research on controlled nuclear fusion, featuring those areas where international co-operation has played an important part, and describes the various arrangements by which this international co-operation is facilitated. (author)

The application of an internal state variable model to the viscoplastic behavior of irradiated ASTM 304L stainless steel

Energy Technology Data Exchange (ETDEWEB)

McAnulty, Michael J., E-mail: mcanulmj@id.doe.gov [Department of Energy, 1955 Fremont Avenue, Idaho Falls, ID 83402 (United States); Potirniche, Gabriel P. [Mechanical Engineering Department, University of Idaho, Moscow, ID 83844 (United States); Tokuhiro, Akira [Mechanical Engineering Department, University of Idaho, Idaho Falls, ID 83402 (United States)

2012-09-15

Highlights: Black-Right-Pointing-Pointer An internal state variable approach is used to predict the plastic behavior of irradiated metals. Black-Right-Pointing-Pointer The model predicts uniaxial tensile test data for irradiated 304L stainless steel. Black-Right-Pointing-Pointer The model is implemented as a user-defined material subroutine in the finite element code ABAQUS. Black-Right-Pointing-Pointer Results are compared for the unirradiated and irradiated specimens loaded in uniaxial tension. - Abstract: Neutron irradiation of metals results in decreased fracture toughness, decreased ductility, increased yield strength and increased ductile-to-brittle transition temperature. Designers use the most limiting material properties throughout the reactor vessel lifetime to determine acceptable safety margins. To reduce analysis conservatism, a new model is proposed based on an internal state variable approach for the plastic behavior of unirradiated ductile materials to support its use for analyzing irradiated materials. The proposed modeling addresses low temperature irradiation of 304L stainless steel, and predicts uniaxial tensile test data of irradiated experimental specimens. The model was implemented as a user-defined material subroutine (UMAT) in the finite element software ABAQUS. Results are compared between the unirradiated and irradiated specimens subjected to tension tests.

International Research Chairs Initiative | IDRC - International ...

International Development Research Centre (IDRC) Digital Library (Canada)

The International Research Chairs Initiative (IRCI) is a seven-year, CA$8 million research program that pairs top research talent from universities in Canada with their counterparts in developing countries to address key ... The results of this joint effort: world-class discoveries and healthier, wealthier, fairer societies.

The research on super absorption resin made from irradiation soybean

International Nuclear Information System (INIS)

Fu Lixin; Xu Dechun; Meng Lifen; Zhao Xiao'nan; Hu Shaoxin; Chen Changdong

2012-01-01

The research is based on the products made from the fermentation of soybean. Using γ-ray to irradiate the products made from the fermentation of soybean to make super absorption resin, and the result is that the products irradiated by 20 kGy can absorb nearly 2000 times of its volume. (authors)

Status of international cooperation in nuclear technology on testing/research reactors between JAEA and INP-NNC

International Nuclear Information System (INIS)

Kawamura, Hiroshi; Tsuchiya, Kunihiko; Takemoto, Noriyuki; Kimura, Akihiro; Tanimoto, Masataka; Izumo, Hironobu; Chakrov, Petr; Gizatulin, Shamil; Chakrova, Yelena; Ludmila, Chkushuina; Asset, Shaimerdenov; Nataliya, Romanova

2012-02-01

Based on the implementing arrangement between National Nuclear Center of the Republic of Kazakhstan (NNC) and the Japan Atomic Energy Agency (JAEA) for 'Nuclear Technology on Testing/Research Reactors' in cooperation in Research and Development in Nuclear Energy and Technology, four specific topics of cooperation (STC) have been carried out from June, 2009. Four STCs are as follows; (1) STC No.II-1 : International Standard of Instrumentation. (2) STC No.II-2 : Irradiation Technology of RI Production. (3) STC No.II-3 : Lifetime Expansion of Beryllium Reflector. (4) STC No.II-4 : Irradiation Technology for NTD-Si. The information exchange, personal exchange and cooperation experiments are carried out under these STCs. The status in the field of nuclear technology on testing/research reactors in the implementing arrangement is summarized, and future plans of these specific topics of cooperation are described in this report. (author)

Results of wholesomeness test on basic plan of research and development of food irradiation (7 items)

International Nuclear Information System (INIS)

Furuya, Tsuyoshi

1989-01-01

Twenty years have elapsed since the general research on food irradiation was begun in Japan as the new technology for food preservation, and the research on the wholesomeness of irradiated foods has been carried out in wide range together with the research on irradiation effect, irradiation techniques and economical efficiency. The wholesomeness of irradiated foods includes chronic toxicity including carcinogenic property in the continuous intake for long period, the effect to reproduction function over many generations and the possibility of giving hereditary injury to cells, the nutritional adequacy required for the sustenance of life and the increase of health, and microbiological safety. In Japan, the research on food irradiation was designated as an atomic energy specific general research, and as the objects of research, potato and onion for the prevention of germination, rice and wheat for the protection from noxious insects, fish paste products, wienerwurst and mandarin orange for sterilization were selected. For the irradiation, Co-60 gamma ray was used except the case of mandarin orange using electron beam. The research on all 7 items was finished, and the irradiation of potato was permitted. (K.I.)

Immersion research education: students as catalysts in international collaboration research.

Science.gov (United States)

Anderson, K H; Friedemann, M L; Bűscher, A; Sansoni, J; Hodnicki, D

2012-12-01

This paper describes an international nursing and health research immersion program. Minority students from the USA work with an international faculty mentor in teams conducting collaborative research. The Minority Health International Research Training (MHIRT) program students become catalysts in the conduct of cross-cultural research. To narrow the healthcare gap for disadvantaged families in the USA and partner countries. Faculty from the USA, Germany, Italy, Colombia, England, Austria and Thailand formed an international research and education team to explore and compare family health issues, disparities in chronic illness care, social inequities and healthcare solutions. USA students in the MHIRT program complete two introductory courses followed by a 3-month research practicum in a partner country guided by faculty mentors abroad. The overall program development, student study abroad preparation, research project activities, cultural learning, and student and faculty team outcomes are explored. Cross-fertilization of research, cultural awareness and ideas about improving family health occur through education, international exchange and research immersion. Faculty research and international team collaboration provide opportunities for learning about research, health disparities, cultural influences and healthcare systems. The students are catalysts in the research effort, the dissemination of research findings and other educational endeavours. Five steps of the collaborative activities lead to programmatic success. MHIRT scholars bring creativity, enthusiasm, and gain a genuine desire to conduct health research about families with chronic illness. Their cultural learning stimulates career plans that include international research and attention to vulnerable populations. © 2012 The Authors. International Nursing Review © 2012 International Council of Nurses.

Food irradiation newsletter. V.18, no.1

International Nuclear Information System (INIS)

1994-04-01

This newsletter contains a report on the 10th Annual Meeting of the International Consultative Group on Food Irradiations, summaries of the Second Research Co-ordination Meetings(RCMs) and Final RCM of the Asian Regional Co-operative Project on Food Irradiation with Emphasis on Process Control and Applications(RPFI-Pase III), the resolutions and considerations of food irradiation by the IAEA Board and summaries of the Regional Project for Research, Developing and Training on the Application of Nuclear Techniques to Food Preservation in the Near East. Reviews and order information for new publications and a listing of future meetings and workshops are located in the back of this newsletter

Research on sprout inhibition effect of refrigerated garlic by irradiation

International Nuclear Information System (INIS)

Zhang Xuan; He Jianzhong; Li Ruijun

2005-01-01

This paper researches the sprout inhibition effect by irradiation on refrigerated garlic. The results shows that, the garlic is still in the period of dormancy within 7 days after taken out from the refrigerated warehouse, and irradiation have a good sprout inhibition effect on it. The irradiation dose is 40-90 Gy, the same as that of the post harvest irradiation treatment on garlic. Refrigerate the Zhongmu Garlic (at -2 degree C-0 degree C) until the middle ten days of February the next year, place it at the room temperature (10 degree C-15 degree C) for 1-7 days after taking it out of the warehouse, then use 60 Co γ-ray to irradiate it until the absorbed dose reaches 40-90 Gy, the sprout inhibition effect can be realized. The test also indicates that the deposited time after taking out of the refrigerated warehouse is crucial to the sprout inhibition effect of refrigerated garlic by irradiation. (authors)

Irradiated Foods Detection by Thermoluminescence (TL) and DEFT/APC Analysis

International Nuclear Information System (INIS)

Choi, I.D.; Kang, E.K.; Yang, J.S.

2004-01-01

Irradiated food detection methods such as Thermoluminescence (TL) and Direct Epifluorescent Filter Technique and Aerobic Plate Count (DEFT/APC) methods were evaluated. Fresh green-onion, onion, and ginger were irradiated at 0, 0.3, 0.6, and 0.9 kGy. Difference in log DEFT/APC units between irradiated and un-irradiated samples was less than 2 long units, below the average threshold value (3-4 long units) of international researches

Microstructural characterization and model of hardening for the irradiated austenitic stainless steels of the internals of pressurized water reactors

International Nuclear Information System (INIS)

Pokor, C.

2003-01-01

The core internals of Pressurized Water Reactors (PWR) are composed of SA 304 stainless steel plates and CW 316 stainless steel bolts. These internals undergo a neutron flux at a temperature between 280 deg C and 380 deg C which modifies their mechanical properties. These modifications are due to the changes in the microstructure of these materials under irradiation which depend on flux, dose and irradiation temperature. We have studied, by Transmission Electron Microscopy, the microstructure of stainless steels SA 304, CW 316 and CW 316Ti irradiated in a mixed flux reactor (OSIRIS at 330 deg C between 0,8 dpa et 3,4 dpa) and in a fast breeder reactor at 330 deg C (BOR-60) up to doses of 40 dpa. Moreover, samples have been irradiated at 375 deg C in a fast breeder reactor (EBR-II) up to doses of 10 dpa. The microstructure of the irradiated stainless steels consists in faulted Frank dislocation loops in the [111] planes of austenitic, with a Burgers vector of [111]. It is possible to find some voids in the solution annealed samples irradiated at 375 deg C. The evolution of the dislocations loops and voids has been simulated with a 'cluster dynamic' model. The fit of the model parameters has allowed us to have a quantitative description of our experimental results. This description of the microstructure after irradiation was coupled together with a hardening model by Frank loops that has permitted us to make a quantitative description of the hardening of SA 304, CW 316 and CW 316Ti stainless steels after irradiation at a certain dose, flux and temperature. The irradiation doses studied grow up to 90 dpa, dose of the end of life of PWR internals. (author)

Joint research centre fusion materials irradiations in HFR: Present status and prospectives

International Nuclear Information System (INIS)

Casini, G.; Fenici, P.

1989-01-01

First a review is made of the Joint Research Centre experimental activity at HFR-Petten in the frame of the Fusion Technology and Safety Programme. The materials under investigation are: Cr-Ni Austenitic steels (316-L type) and Cr-Mn Austenitic steels (AMCR and FI type) as structural materials and Pb-17Li eutetic as tritium breeding material. The experiments on structural materials comprise: Sample irradiations with post-irradiation tensile tests (FRUST) Sample irradiations under constant load and post-irradiation strain measurement (TRIESTE) On-line creep tests (CRISP). The experiments on Pb-17Li breeder material regard sample irradiations to investigate tritium production and recovery as well as tritium permeation through blanket structures (LIBRETTO Experiment). Both irradiations on structural and breeding materials will be pursued up to the end of the current JRC-Multiannual Programme (1988-1991) and even further. In the last part of the paper expected developments of the testing programme at HFR are discussed. New areas of research should involve materials for divertor applications (NET/ITER) and advanced low activation composite materials for Commercial Power Reactors

Current status of food irradiation overseas. Data update from 2013

International Nuclear Information System (INIS)

Todoriki, Setsuko

2015-01-01

As the movement of international standards and specifications, the treatment standards related to food irradiation have been summarized on the basis of the ISPM 28 Annex PT-19 of International Plant Protection Convention. As the movement in the United States, there are the following tables: (1) food and radiation dose approved by FDA, (2) lowest radiation dose for the pests of each quarantine target stipulated by the USDA/APHIS as the plant quarantine authorities of the United States Department of Agriculture, (3) items and production sites of vegetables/fruits about which irradiation treatment in import phytosanitary has been approved by USDA, and (4) import volume of irradiated fruits into the United States. The following statistics have also been summarized: (1) materials and irradiation dose permitted FSANZ, which is the food safety regulatory authorities of Australia and New Zealand, and (2) irradiation-treated amount of each food in the EU territory in 2013, and treated amount in each country. In Asia, the amount and facilities of irradiation treatment are described for ten countries including China, Thailand, India, etc. As the contents of the Coordinated Research Programs (CRPs) of International Atomic Energy Agency (IAEA), the following are introduced: (1) three items including 'Development of generic irradiation doses for quarantine treatments,' and (2) three items of the contents of 'The Regional Cooperative Agreement for Research, Development and Training Related to Nuclear Science and Technology for Asia and the Pacific: RCA).' (A.O.)

Irradiation devices at the upgraded research reactor BER II

International Nuclear Information System (INIS)

Gawlik, D.; Robertson, T.

1992-06-01

An overview is given of those properties of the BER II research reactor which are important for carrying out irradiation experiments. The subsequent section describes the irradiation devices currently installed in the reactor, or which are under construction, and some of the experiments which can be conducted using them. The field of application of these experiments extends from the study of the metabolism of trace elements in man, employing a highly sensitive element analysis, via radiation damage of high-tech materials, to the identification of paintings of the old masters. The report concludes with a review of the technical details of the irradiation devices, giving information of interest for potential users. (orig.)

Installation of the water environment irradiation facility for the IASCC research under the BWR/PWR irradiation environment (2)

International Nuclear Information System (INIS)

Magome, Hirokatsu; Okada, Yuji; Hanawa, Hiroshi; Sakuta, Yoshiyuki; Kanno, Masaru; Iida, Kazuhiro; Ando, Hitoshi; Yonekawa, Akihisa; Ueda, Haruyasu; Shibata, Mitsunobu

2014-07-01

In Japan Atomic Energy Agency, in order to solve the problem in the long-term operation of a light water reactor, preparation which does the irradiation experiment of light-water reactor fuel and material was advanced. JMTR stopped after the 165th operation cycle in August 2006, and is advancing renewal of the irradiation facility towards re-operation. The material irradiation test facility was installed from 2008 fiscal year to 2012 fiscal year in JMTR. This report summarizes manufacture and installation of the material irradiation test facility for IASCC research carried out from 2012 to 2014 in the follow-up report reported before (JAEA-Technology 2013-019). (author)

Dielectric parameters of blood plasma in rats at external and internal irradiation with sublethal doses

International Nuclear Information System (INIS)

Khadzhidekova, E.; Kiradzhiev, G.

1991-01-01

Sexually mature male rats have received external gamma irradiation with 50, 200 or 380 cGy, treated with 89 Sr (333 or 1665 kBq per rat, femur dose 70, resp. 290 cGy), or 144 Ce (370 kBq per rat, liver dose 70 cGy). Dielectric parameters (permittivity and conductivity) have been measured in the frequency range 1.4 - 17 Mhz on different terms (1 to 30th day after the treatment). For all groups and terms the coefficients and equations describing the relationship between the dielectric permittivity ε and the frequency ν of the changing electric field have been calculated. On the basis of dielectric parameters the relaxation time of the plasma protein molecules is determined. It has been shown that the changes in dielectric permittivity are expressed at different frequencies specific for a given dose; the same is established for the conditions of internal irradiation. The frequency dependence of the permittivity is described as an exponential curve analogous to that of the control but with a changed exponent. In applying higher doses or activities the relationship turns from exponential to parabolic. The relaxation time, expressing the changes in conformal state of macromolecules, varies but is in all cases longer than one of the controls for the whole period of study at external irradiation with 50 and 380 cGy. It is lower at irradiation with 200 cGy, as well as at internal irradiation. 3 tabs., 13 refs

Irradiation Facilities of the Takasaki Advanced Radiation Research Institute

Directory of Open Access Journals (Sweden)

Satoshi Kurashima

2017-03-01

Full Text Available The ion beam facility at the Takasaki Advanced Radiation Research Institute, the National Institutes for Quantum and Radiological Science and Technology, consists of a cyclotron and three electrostatic accelerators, and they are dedicated to studies of materials science and bio-technology. The paper reviews this unique accelerator complex in detail from the viewpoint of its configuration, accelerator specification, typical accelerator, or irradiation technologies and ion beam applications. The institute has also irradiation facilities for electron beams and 60Co gamma-rays and has been leading research and development of radiation chemistry for industrial applications in Japan with the facilities since its establishment. The configuration and utilization of those facilities are outlined as well.

Food Irradiation Newsletter. V. 12, no. 1

International Nuclear Information System (INIS)

1988-04-01

This Newsletter reports summaries of work carried out in the past year. A coordinated research programme on ''Use of Irradiation to Control Infectivity of Food-borne Parasites'' was implemented in early 1987. The first Research Coordination Meeting of this programme was held in Poznan, Poland, August 1987 and its report is included. Another important development is ''Food Irradiation Plant: Project Profile'' of the International Finance Corporation (IFC), a subsidiary of the World Bank. IFC is in principle ready to finance installations on food irradiation facilities in developing countries provided that the proposals are submitted through Governmental channels. Details on developing such proposals for possible funding by IFC are included. This issue also contains a supplement, an up-dated list of clearance of irradiated foods. Refs, 1 fig., 1 tab

Present and future of food irradiation in China

International Nuclear Information System (INIS)

Chen Hao; Cai Jiming; Pan Pingchuan; Liu Ge

2006-01-01

The treatment of foods and agricultural products by irradiation technology in China has become an increasingly accepted practice and has been recognized as a public health intervention measure for controling pathogenic microbes and pests on foods since early 1980s. This paper gives an outline on the history and the current status of food irradiation in China, including the research interest, commercial application, public acceptance, regulations and hygienic standards of irradiated foods, and the irradiation facilities for food irradiation. The newly finished or scheduled irradiation facilities in China up to 2007 are introduced. And problems with the food irradiation studies, especially in analysis of food quality during irradiation, the implementation of GMP and HACCP in the food irradiation production and harmonization of food irradiation regulations with international standards, are also discussed. (authors)

Dynamics of International Business Research

DEFF Research Database (Denmark)

Kunz, Werner; Manning, Stephan; Pedersen, Torben

2013-01-01

This study examines the evolution of the field of international business (IB) research based on a relational cluster analysis of co-citations in the Journal of International Business Studies (JIBS) from 1982 to 2011. Particularly, we examine the changing role of theory in relation to empirical IB...... research. Based on a factor and network analysis, we identify distinct clusters of IB research and their relations over time. We show that the initial focus of IB research on issues of international expansion has shifted towards issues of governance and implementation. In this process, debates on foreign...... entry mode and culture have served as important integrating themes. At the same time, theory debates in IB have expanded from a narrow focus on explaining international expansion, to a rather heterogeneous conglomerate of approaches which have assisted increasingly differentiated empirical research. Our...

International Journal of Health Research

African Journals Online (AJOL)

Erah

The International Journal of Health Research is an online international ... The journal welcomes original research papers, reviews and case reports on ..... mediator generated by endothelial cells, ... Springer Science and Business Media,.

Innovative approaches to the Management of Irradiated Nuclear Graphite Wastes: Addressing the Challenges through International Collaboration with Project 'GRAPA'

International Nuclear Information System (INIS)

Wickham, A.J.; Ojovan, M.; O'Sullivan, P.; )

2017-01-01

There exists more than 250.000 tonnes of irradiated (and therefore radioactive) nuclear graphite (i-graphite) in the world, primarily as a result of the development of graphite-moderated power-reactor systems, initially for defence and subsequently for commercial purposes. Only a very small number of such plants have been dismantled and, for most cases, the final destiny of the irradiated graphite remains unresolved. Future high-temperature reactor programmes, such as the Chinese HTR-PM development, will produce more graphite and carbonaceous wastes from both structural components and the fuel pebbles (which are approximately 96% carbonaceous), the latter producing a continuous stream of so-called 'operational waste'. The problem of dismantling irradiated graphite reactor stacks, possibly distorted through neutron damage and in some cases degraded further by radiation-chemical attack by gaseous coolants, and then finding the appropriate treatments and final destiny of the material, has exercised both the European Union and the International Atomic Energy Agency for more than 25 years, seeking to address the different issues and available disposal solutions in different IAEA Member States. An IAEA collaborative research programme on treatment options has recently been completed, and an active group of international specialists in this area has now been established as part of the IAEA International Decommissioning Network under the envelope of Project 'GRAPA' (Irradiated Graphite Processing Approaches), which includes representatives from Belgium, China, France, Germany, India, Italy, Lithuania, Rep. of Korea, Romania, Spain, Switzerland, Ukraine and the Russian Federation with direct responsibilities for various parts of the decommissioning and graphite-disposal process in a variety of reactor designs. Interest has also been expressed by colleagues from Sweden and Japan. Work is in progress on a number of topic areas where weaknesses in the

Recent progress in food preservation by irradiation

Energy Technology Data Exchange (ETDEWEB)

Vas, K [Food and Agriculture Organization of the United Nations, Rome (Italy)

1977-01-01

The possible use of ionizing radiations in food preservation is discussed. It has been recognized that treatment of foods with ionizing radiations not only serves the purpose of stabilizing them in their original state, but may also enhance the hygienic properties of certain foodstuffs. Several examples conerning improvements in food quality and preservation by irradiation in different countries have been reported. The economic viewpoint and the possibilities for use of irradiated products in international trade are discussed. The development of international cooperation in sharing of research results and information and sharing of costs of wholesomeness testing have been pointed out.

Recent progress in food preservation by irradiation

International Nuclear Information System (INIS)

Vas, K.

1977-01-01

The possible use of ionizing radiations in food preservation is discussed. It has been recognized that treatment of foods with ionizing radiations not only serves the purpose of stabilizing them in their original state, but may also enhance the hygienic properties of certain foodstuffs. Several examples conerning improvements in food quality and preservation by irradiation in different countries have been reported. The economic viewpoint and the possibilities for use of irradiated products in international trade are discussed. The development of international cooperation in sharing of research results and information and sharing of costs of wholesomeness testing have been pointed out. (G.C.)

Food Irradiation Newsletter. V. 10, no. 2

International Nuclear Information System (INIS)

1986-11-01

This issue reports the summary of the Task Force Meeting on the Use of Irradiation to Ensure Hygienic Quality of Food, convened by the International Consultative Group on Food Irradiation (ICGFI) in Vienna, July 1986. The full report of the final FAO/IAEA Research Co-ordination Meeting on Factors Influencing the Utilization of Food Irradiation, convened in Dubrovnik, Yugoslavia in June 1986, contains the conclusion of the work carried out under the Co-ordinated Research Programme in the past 5 years. A Regional Co-ordinated Research Programme for Latin America has been launched with a workshop convened on this subject in Piracicaba, Brazil, July 1986. Also featured is the summary report of the FAO/IAEA Seminar for Asia and the Pacific on the Practical Application of Food Irradiation convened in Shanghai, People's Republic of China, April 1986. The well-attended seminar reported on the progress and development of practical scale application of food irradiation in the region. A successful market testing of irradiated mangoes in Miami, Florida is also described. The outcome of this test is quite significant in view of the Chernobyl accident a few months before the tests. Tabs

International Journal of Health Research

African Journals Online (AJOL)

Erah

The International Journal of Health Research is an online international journal ... research papers, reviews and case reports on current topics of special ... formulated as Gastroretentive Drug Delivery System ...... In vivo gastric studies were run.

Literature study of the radiobiological parameters of Caesium-137 required for evaluating internal irradiation doses as a function of age; Etude bibliographique des parametres radiobiologiques du cesium-137 necessaires a l'evaluation des doses d'irradiation interne en fonction de l'age

Energy Technology Data Exchange (ETDEWEB)

Garnier, A. [Commissariat a l' Energie Atomique, 92 - Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1968-07-01

This document reassembles information published in scientific literature on radiobiological parameters of Cs-137, necessary for the estimate of the internal irradiation dose of man according to his age (during growth). The data are completed by a commented review of the mathematical models, proposed in order to value the irradiation doses from ingested cesium and the biological parameters. (author) [French] Ce document rassemble les informations publiees dans la litterature scientifique, concernant les parametres radiobiologiqueo du cesium-137, necessaires a l'evaluation des doses d'irradiation interne de l'homme en fonction de l'age. Ces donnees sont completees par une revue commentee des modeles mathematiques proposes en vue de l'evaluation des doses d'irradiation a partir des quantites de cesium ingerees et des parametres biologiques. (auteur)

Analysis on the post-irradiation examination of the HANARO miniplate-1 irradiation test for Kijang research reactor

Energy Technology Data Exchange (ETDEWEB)

Park, Jong Man; Tahk, Young Wook; Jeong, Yong Jin [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); and others

2017-08-15

The construction project of the Kijang research reactor (KJRR), which is the second research reactor in Korea, has been launched. The KJRR was designed to use, for the first time, U–Mo fuel. Plate-type U–7 wt.% Mo/Al–5 wt.% Si, referred to as U–7Mo/Al–5Si, dispersion fuel with a uranium loading of 8.0 gU/cm{sup 3}, was selected to achieve higher fuel efficiency and performance than are possible when using U{sub 3}Si{sub 2}/Al dispersion fuel. To qualify the U–Mo fuel in terms of plate geometry, the first miniplates [HANARO Miniplate (HAMP-1)], containing U–7Mo/Al–5Si dispersion fuel (8 gU/cm{sup 3}), were fabricated at the Korea Atomic Energy Research Institute and recently irradiated at HANARO. The PIE (Post-irradiation Examination) results of the HAMP-1 irradiation test were analyzed in depth in order to verify the safe in-pile performance of the U–7Mo/Al–5Si dispersion fuel under the KJRR irradiation conditions. Nondestructive analyses included visual inspection, gamma spectrometric mapping, and two-dimensional measurements of the plate thickness and oxide thickness. Destructive PIE work was also carried out, focusing on characterization of the microstructural behavior using optical microscopy and scanning electron microscopy. Electron probe microanalysis was also used to measure the elemental concentrations in the interaction layer formed between the U–Mo kernels and the matrix. A blistering threshold test and a bending test were performed on the irradiated HAMP-1 miniplates that were saved from the destructive tests. Swelling evaluation of the U–Mo fuel was also conducted using two methods: plate thickness measurement and meat thickness measurement.

Analysis on the post-irradiation examination of the HANARO miniplate-1 irradiation test for kijang research reactor

Directory of Open Access Journals (Sweden)

Jong Man Park

2017-08-01

Full Text Available The construction project of the Kijang research reactor (KJRR, which is the second research reactor in Korea, has been launched. The KJRR was designed to use, for the first time, U–Mo fuel. Plate-type U–7 wt.% Mo/Al–5 wt.% Si, referred to as U–7Mo/Al–5Si, dispersion fuel with a uranium loading of 8.0 gU/cm3, was selected to achieve higher fuel efficiency and performance than are possible when using U3Si2/Al dispersion fuel. To qualify the U–Mo fuel in terms of plate geometry, the first miniplates [HANARO Miniplate (HAMP-1], containing U–7Mo/Al–5Si dispersion fuel (8 gU/cm3, were fabricated at the Korea Atomic Energy Research Institute and recently irradiated at HANARO. The PIE (Post-irradiation Examination results of the HAMP-1 irradiation test were analyzed in depth in order to verify the safe in-pile performance of the U–7Mo/Al–5Si dispersion fuel under the KJRR irradiation conditions. Nondestructive analyses included visual inspection, gamma spectrometric mapping, and two-dimensional measurements of the plate thickness and oxide thickness. Destructive PIE work was also carried out, focusing on characterization of the microstructural behavior using optical microscopy and scanning electron microscopy. Electron probe microanalysis was also used to measure the elemental concentrations in the interaction layer formed between the U–Mo kernels and the matrix. A blistering threshold test and a bending test were performed on the irradiated HAMP-1 miniplates that were saved from the destructive tests. Swelling evaluation of the U–Mo fuel was also conducted using two methods: plate thickness measurement and meat thickness measurement.

International Combined Orthopaedic Research Societies: A model for international collaboration to promote orthopaedic and musculoskeletal research

Directory of Open Access Journals (Sweden)

Theodore Miclau

2014-10-01

Full Text Available In October 2013, the International Combined Orthopaedic Research Societies (ICORS; http://i-cors.org was founded with inaugural member organisations from the previous Combined Orthopaedic Research Society, which had sponsored combined meetings for more than 2 decades. The ICORS is dedicated to the stimulation of orthopaedic and musculoskeletal research in fields such as biomedical engineering, biology, chemistry, and veterinary and human clinical research. The ICORS seeks to facilitate communication with member organisations to enhance international research collaborations and to promote the development of new international orthopaedic and musculoskeletal research organisations. Through new categories of membership, the ICORS represents the broadest coalition of orthopaedic research organisations globally.

Relationship between the international marketing research and the international marketing information system

OpenAIRE

Grubor Aleksandar

2004-01-01

Real and complete understanding relationship between the international marketing research and the international marketing information system requires recognizing essentials of the both concept. The international marketing research constitutes a process with coherent phases, whereas the international marketing information system is a part of integrated company's information system. Approach to learning relationship between the international marketing research and the international marketing in...

Calculation of absorbed dose of anchorage-dependent cells from internal beta-rays irradiation

International Nuclear Information System (INIS)

Chen Jianwei; Huang Gang; Li Shijun

2001-01-01

Objective: To elicit the formula of internal dosimetry in anchorage-dependent cells by beta-emitting radionuclides from uniformly distributed volume sources. Methods: By means of the definition of absorbed dose and the MIRD (Medical International Radiation Dose) scheme the formula of internal dosimetry was reasonably deduced. Firstly, studying the systems of suspension culture cells. Then, taking account of the speciality of the systems of the anchorage-dependent cells and the directions of irradiation, the absorbed dose of anchorage -dependent cells was calculated by the accumulated radioactivity, beta-ray energy, and the volume of the cultured systems. Results: The formula of internal dosimetry of suspension culture cells and anchorage-dependent cells were achieved. At the same time, the formula of internal dosimetry of suspension culture cells was compared with that of MIRD and was confirmed accurate. Conclusion: The formula of internal dosimetry is concise, reliable and accurate

Pressure control of a proton beam-irradiated water target through an internal flow channel-induced thermosyphon.

Science.gov (United States)

Hong, Bong Hwan; Jung, In Su

2017-07-01

A water target was designed to enhance cooling efficiency using a thermosyphon, which is a system that uses natural convection to induce heat exchange. Two water targets were fabricated: a square target without any flow channel and a target with a flow channel design to induce a thermosyphon mechanism. These two targets had the same internal volume of 8 ml. First, visualization experiments were performed to observe the internal flow by natural convection. Subsequently, an experiment was conducted to compare the cooling performance of both water targets by measuring the temperature and pressure. A 30-MeV proton beam with a beam current of 20 μA was used to irradiate both targets. Consequently, the target with an internal flow channel had a lower mean temperature and a 50% pressure drop compared to the target without a flow channel during proton beam irradiation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Irradiated fuel by-product separation research in Canada

International Nuclear Information System (INIS)

Burston, M.

1984-01-01

Although no decision has been made to reprocess irradiated CANDU fuel, by-product separation research has recently been initiated in Canada because of its potential importance to Canadian research programs in advanced fuel cycles (especially U/Pu cycle development in the near term) and nuclear waste management. In addition, separated by-products could have a significant commercial potential. Demonstrated applications include: heat sources, gamma radiation sources, light sources, new materials for productions of other useful isotopes, etc. For illustrative purposes the calculated market value of by-products currently stored in irradiated CANDU fuel is approximately $210/kgU. Ontario Hydro has initiated a program to study the application of new separation technolgies, such as laser-based techniques and the plasma ion cyclotron resonance separation technique, to either augment and/or supplant the chemical extraction methods. The main goal is to develop new, more economical extraction methods in order to increase the magnitude of the advantages resulting from this approach to reprocessing. (author)

An overview of the PIREX Proton Irradiation facility and its research program

Energy Technology Data Exchange (ETDEWEB)

Victoria, M.; Gavillet, D. [Association EURATOM, Villigen (Switzerland)

1995-10-01

The main design characteristics of PIREX (Proton Irradiation Experiment) are described. The facility is installed in the 590 MeV proton beam of the PSI accelerator system. Its main task is the irradiation and testing of fusion reactor candidate materials. Protons of this energy produce simultaneously in the target material displacement damage and impurities, amongst them helium. They can therefore simulate possible synergistic effects between helium and damage that would result from irradiations with the fusion neutrons. The research program being developed includes studies on both materials of technological interest, such as martensitic stainless steels and Mo - based alloys and basic radiation damage research on pure metals. The facility is also being used for actinide transmutation studies, in the so called ATHENA experiment. The main directions of the research program are described and examples of present results are given.

Canada Research Chairs | IDRC - International Development ...

International Development Research Centre (IDRC) Digital Library (Canada)

aspx. International Research Chairs Initiative. The International Research Chairs Initiative pairs top research talent from universities in Canada with their counterparts in developing countries to address key development challenges. View more

International fusion materials irradiation facility and neutronic calculations for its test modules

International Nuclear Information System (INIS)

Sokcic-Kostic, M.

1997-01-01

The International Fusion Material Irradiation Facility (IFMIF) is a projected high intensity neutron source for material testing. Neutron transport calculations for the IFMIF project are performed for variety of here explained reasons. The results of MCNP neutronic calculations for IFMIF test modules with NaK and He cooled high flux test cells are presented in this paper. (author). 3 refs., 2 figs., 3 tabs

Progress of research on the mechanism of microstructure evolution during irradiation with collision cascades

International Nuclear Information System (INIS)

Kiritani, Michio

1997-01-01

Progress of the research on microstructural evolution during radiation damage accompanied with collision cascades, particularly by neutrons, is summarized from the researches reported in 1995 and 1996. The major part of irradiation was performed with JMTR (Japan Material Testing Reactor), and comparisons were made with the result of D-T fusion neutron irradiation with RTNS-II (Rotating Target Neutron Source, LLNL). The subjects concerned are: (1) Microstructure evolution during irradiation, (2) Processes controlling the accumulation of defects during cascade damage, (3) Subcascades from the viewpoint of point defect cluster formation, (4) Mechanism of suppression of microstructure evolution during temperature cycle neutron irradiation of nickel, (5) Identification of the nature of neutron-irradiation-induced point defect clusters in copper by means of electron irradiation, (6) Easy one-dimensional motion of small interstitial clusters, (7) Identification of the nature of small point defect clusters in neutron irradiated Fe-16Ni-15Cr, (8) Spatial distribution of nucleation of point defect clusters by high energy particle irradiation, (9) Crystallographic orientation dependence of dislocation structures in neutron irradiated metals, (10) Examination of defect accumulation mode with multi-section-removable-irradiation-rig in Japan Material Testing Reactor, (11) Estimation of freely migrating point defects during cascade damage by the growth of helical dislocations, (12) Identification of the nature of neutron-irradiation-induced small point defect clusters in Nickel by means of electron irradiation, (13) Thermal stability of point defect clusters in neutron irradiated Fe-16Ni-15Cr. (author)

International Research Study of Public Procurement

NARCIS (Netherlands)

Telgen, Jan; Harland, C.; Callender, G.; Harland, C.; Nassimbeni, G.; Schneller, E.

2012-01-01

In this chapter we examine the specific issue of public procurement, its importance to local, regional, national, and international economies as evidenced in a unique international comparative research study – the International Research Study of Public Procurement (IRSPP). First the public

Relationship between the international marketing research and the international marketing information system

Directory of Open Access Journals (Sweden)

Grubor Aleksandar

2004-01-01

Full Text Available Real and complete understanding relationship between the international marketing research and the international marketing information system requires recognizing essentials of the both concept. The international marketing research constitutes a process with coherent phases, whereas the international marketing information system is a part of integrated company's information system. Approach to learning relationship between the international marketing research and the international marketing information system is distinguish in domestic than in the foreign expert literature.

International Occupational Therapy Research Priorities.

Science.gov (United States)

Mackenzie, Lynette; Coppola, Susan; Alvarez, Liliana; Cibule, Lolita; Maltsev, Sergey; Loh, Siew Yim; Mlambo, Tecla; Ikiugu, Moses N; Pihlar, Zdenka; Sriphetcharawut, Sarinya; Baptiste, Sue; Ledgerd, Richard

2017-04-01

Occupational therapy is a global profession represented by the World Federation of Occupational Therapists (WFOT). International research priorities are needed for strategic guidance on global occupational therapy practice. The objective of this study was to develop international research priorities to reflect global occupational therapy practice. A Delphi study using three rounds of electronic surveys, distributed to WFOT member organizations and WFOT accredited universities, was conducted. Data were analyzed after each round, and priorities were presented for rating and ranking in order of importance. Forty-six (53%) out of 87 WFOT member countries participated in the Delphi process. Eight research priorities were confirmed by the final electronic survey round. Differences were observed in rankings given by member organizations and university respondents. Despite attrition at Round 3, the final research priorities will help to focus research efforts in occupational therapy globally. Follow-up research is needed to determine how the research priorities are being adopted internationally.

Advance of investigation of irradiation embrittlement mechanism of nuclear reactor pressure vessel steels. History and future of irradiation embrittlement researches

International Nuclear Information System (INIS)

Ishino, Shiori

2007-01-01

The nuclear reactor pressure vessel is the most important component of LWR plants required to be safe. This paper describes contents of the title consisting of four chapters. The first chapter states the general theory of irradiation effects, irradiation embrittlement and decreasing of toughness, and some kinds of pressure vessel steels. The second chapter explains history of irradiation embrittlement investigations and the advance of research methods for experiments and calculation. The third chapter contains information of inner structure of irradiated materials and development of prediction equations, recent information of embrittlement mechanism and mechanism guided prediction method, USA model and Central Research Institute of Electric Power Industry (CRIEPI) model. The fourth chapter states recent problems from viewpoints of experimental and analytical approaches. Comparison of standards of LWR pressure vessel steels between Japan and USA, relation between the density of number of cluster and the copper content, effect of flux on clustering of copper atoms, and CRIEPI's way of approaching the prediction method are illustrated. (S.Y.)

Internal irradiation with radon daughters in some Bulgarian polymetal mines over the period 1962-1993

International Nuclear Information System (INIS)

Presiyanov, D.; Dimotrov, M.

1993-01-01

The results of radiation monitoring of the working environment in the Bulgarian metal mines are evaluated. The irradiation levels in the Burgas Copper Mines and their variations over the years have been estimated. A radiological characteristic of the working environment is provided together with a risk assessment for workers in different mines. A retrospective risk assessment is attempted for mines where increased radon 222 levels have been detected recently. The organization of radiometric monitoring and measures to limit the risk of internal irradiation are discussed. (author)

International research collaboration in maritime health

DEFF Research Database (Denmark)

Jensen, Olaf Chresten

2011-01-01

. The area is regulated by international standards based on international research-based knowledge on health and safety. Moreover, many of the world's seafarers come from developing countries with specific disease problems like HIV and no possibility of independent maritime health research. The international......The new ILO-2006-convention and the EU Commission's strategic objectives for the EU maritime transport policy 2008-2018, mentions the necessity of a modern health and safety system for maritime transportation. However, there is no specific strategy for the development of maritime health and safety...... maritime health research is sparse, and an increase in such research is necessary to help benefit needed shipping as a highly globalized industry. This paper presents an example of such research, accompanied by a discussion of methods and opportunities to increase international maritime health research....

Fuel irradiation research of Japan at Halden reactor. Achievement of cooperative researches between JAERI and several organizations in the period from 2000 to 2002 (Joint research)

International Nuclear Information System (INIS)

2004-03-01

JAERI has performed cooperative researches with several Japanese organizations utilizing the Halden Boiling Heavy Water Reactor(HBWR) which is located at Halden in Norway. These researches are carried out based on the contracts of the cooperative researches, which are revised every three years, in accordance with the renewal of the participation of JAERI to the OECD Halden Reactor Project. This report summarizes the objectives, contents and outlines of the achievements of the cooperative researches during the three years from 2000 January to 2002 December. During the period, seven cooperative researches had been carried out. Two of them had been completed and other five researches have been continued to the next three-year period. Most of them are irradiation test researches of advanced fuel and cladding in order to prepare the higher burnup utilization and introduction of LWR fuel and MOX fuel in LWRs of Japan. As the researches of fuel irradiation usually take long time for preparing test and irradiation, three years are usually not enough to obtain some achievements from the irradiation tests. Therefore, five cooperative researches have been continued to the next three-year period. In this report, the achievements of the researches continued to the next period are not final one but a kind of progress report. (author)

Emerging themes in international business research

OpenAIRE

David A Griffith; Salih Tamer Cavusgil; Shichun Xu

2008-01-01

This study is motivated by two research questions: (1) Which recent contributions have been driving the research agenda in international business? (2) Which emerging themes in the literature are likely to set the stage for future work? To examine these questions, the study examined scholarly work in international business over the time period 1996–2006 in six leading international business journals (Journal of International Business Studies, Management International Review, Journal of World B...

Introduction: international research ethics education.

Science.gov (United States)

Millum, Joseph; Sina, Barbara

2014-04-01

NIH's Fogarty International Center has provided grants for the development of training programs in international research ethics for low- and middle-income (LMIC) professionals since 2000. Drawing on 12 years of research ethics training experience, a group of Fogarty grantees, trainees, and other ethics experts sought to map the current capacity and need for research ethics in LMICs, analyze the lessons learned about teaching bioethics, and chart a way forward for research ethics training in a rapidly changing health research landscape. This collection of papers is the result.

Food irradiation: fiction and reality

International Nuclear Information System (INIS)

1991-01-01

The International Consultative Group on Food Irradiation (IGCFI), sponsored by World Health Organization (WHO), Food and Agriculture Organization (FAO) and the International Atomic Energy Agency (IAEA), with the intention to provide to governments, especially those of developing countries, scientifically correct information about food irradiation, decided to organize a file and questions of general public interest. The document is composed by descriptive files related with the actual situation and future prospective, technical and scientific terms, food irradiation and the radioactivity, chemical transformations in irradiated food, genetic studies, microbiological safety of irradiated food, irradiation and harmlessness, irradiation and additives, packing, irradiation facilities control, process control, irradiation costs and benefits as well as consumers reaction

Study about internal friction in deformed - and irradiated pure titanium

International Nuclear Information System (INIS)

Miyada, L.T.

1979-01-01

Internal friction and modulus are measured in pure Ti at low temperature using an inverted torsion-pendulum at about 1 Hz. The presence of four relaxation peaks P' sub(d)(-140 0 C), P sub(d)(-101 0 C), P' sub(α)(-75 0 C) and P sub(α)(-50 0 C) has been found, and effects of plastic deformation, heat treatment and neutron irradiation on these peaks are investigated in detail. Activation energies and frequency factors of P sub(d) and Pα peaks are consistent with the data in higher frequency range reproted by other workers. The P sub(d) and P' sub(d) peaks grow after deformation and tend to decay after annealing at high temperatures or after neutron irradiation. Both peaks are resonably interpreted in terms of dislocation relaxation mechanisms (Bordoni type) arising from thermally activated motion of dislocations in different slip planes of h.c.f. structure. Peierls stress of dislocations giving rise to each peak have calculated based on Seeger's theory, and found to be consistent with that of f.c.c. metals. On the other hand, P sub(α) and P' sub(α) peaks grow significantly at the expense of P sub(d) and P' sub(d) peaks after neutron irradiation in deformed samples. The behaviour of these peaks as a function of irradiation dose and annealing temperatures strongly indicated that they are due to relaxations resulting from dislocations-point defects interactions (Hasiguti type). It is tentatively suggested that P sub(α) and P' sub(α) peaks are related with interactions of dislocations with divacancies and single vacancies, respectively. Application of Schiller's model showed a consistent result with regard to the P' sub(α) peak experimentally observed. (Author) [pt

Irradiation Tests Supporting LEU Conversion of Very High Power Research Reactors in the US

Energy Technology Data Exchange (ETDEWEB)

Woolstenhulme, N. E.; Cole, J. I.; Glagolenko, I.; Holdaway, K. K.; Housley, G. K.; Rabin, B. H.

2016-10-01

The US fuel development team is developing a high density uranium-molybdenum alloy monolithic fuel to enable conversion of five high-power research reactors. Previous irradiation tests have demonstrated promising behavior for this fuel design. A series of future irradiation tests will enable selection of final fuel fabrication process and provide data to qualify the fuel at moderately-high power conditions for use in three of these five reactors. The remaining two reactors, namely the Advanced Test Reactor and High Flux Isotope Reactor, require additional irradiation tests to develop and demonstrate the fuel’s performance with even higher power conditions, complex design features, and other unique conditions. This paper reviews the program’s current irradiation testing plans for these moderately-high irradiation conditions and presents conceptual testing strategies to illustrate how subsequent irradiation tests will build upon this initial data package to enable conversion of these two very-high power research reactors.

Food Irradiation Newsletter. V. 14, no. 2

International Nuclear Information System (INIS)

1990-12-01

This issue reports specific training activities on Food Irradiation Process Control School, both for technical supervisors of irradiation facilities and food control officials/inspectors, and summary reports of Workshops on dosimetry techniques for food irradiation and on techno-economic feasibility of food irradiation for Latin American countries are included. After 12 years of operation, the International Facility for Food Irradiation Technology (IFFIT) will cease to function after 31 December 1990. This issue reports the last inter-regional training course organized by IFFIT, and also features reports on food irradiation in Asia. Active developments in the field in several Asian countries may be found in the reports of the Workshop on the Commercialization of Food Irradiation, Shanghai, and the Research Co-ordination Meeting on the Asian Regional Co-operative Project on Food Irradiation (with emphasis on acceptance and process control), Bombay. Status reports of programmes in these countries are also included. Refs and tabs

Review of irradiation experiments for water reactor safety research

International Nuclear Information System (INIS)

Tobioka, Toshiaki

1977-02-01

A review is made of irradiation experiments for water reactor safety research under way in both commercial power plants and test reactors. Such experiments are grouped in two; first, LWR fuel performance under normal and abnormal operating conditions, and second, irradiation effects on fracture toughness in LWR vessels. In the former are fuel densification, swelling, and the influence of power ramp and cycling on fuel rod, and also fuel rod behavior under accident conditions in in-reactor experiment. In the latter are the effects of neutron exposure level on the ferritic steel of pressure vessels, etc.. (auth.)

International Business Research: Past, Present and Future

OpenAIRE

David A Ricks

1985-01-01

The Editors of the Journal of International Business Studies (JIBS) always try to publish the best international business research. Unfortunately, there will probably never be a simple response to the question, What constitutes excellent international business research? We might make some progress, however, if we first attempt to define international business research and then identify several noteworthy examples.© 1985 JIBS. Journal of International Business Studies (1985) 16, 1–4

Detection methods of irradiated foodstuffs

Energy Technology Data Exchange (ETDEWEB)

Ponta, C C; Cutrubinis, M; Georgescu, R [IRASM Center, Horia Hulubei National Institute for Physics and Nuclear Engineering, PO Box MG-6, RO-077125 Magurele-Bucharest (Romania); Mihai, R [Life and Environmental Physics Department, Horia Hulubei National Institute for Physics and Nuclear Engineering, PO Box MG-6, RO-077125 Magurele-Bucharest (Romania); Secu, M [National Institute of Materials Physics, Bucharest (Romania)

2005-07-01

Full text: Food irradiation has, in certain circumstances, an important role to play both in promoting food safety and in reducing food losses. The safety and availability of nutritious food are essential components of primary health care. WHO actively encourages the proper use of food irradiation in the fight against foodborne diseases and food losses. To this end, it collaborates closely with FAO and IAEA. Food irradiation can have a number of beneficial effects, including delay of ripening and prevention of sprouting; control of insects, parasites, helminths, pathogenic and spoilage bacteria, moulds and yeasts; and sterilization, which enables commodities to be stored unrefrigerated for long periods. The 1990s witnessed a significant advancement in food irradiation processing. As a result, progress has been made in commercialization of the technology, culminating in greater international trade in irradiated foods and the implementation of differing regulations relating to its use in many countries. Codex General Standard for Irradiated Foodstuffs and Recommended International Code of Practice for the Operation of Irradiation Facilities Used for the Treatment of Foods regulate food irradiation at international level. At European Union level there are in power Directive 1999/2/EC and Directive1999/3/EC. Every particular country has also its own regulations regarding food irradiation. In Romania, since 2002 the Norms Regarding Foodstuffs and Food Ingredients Treated by Ionizing Radiation are in power. These Norms are in fact the Romanian equivalent law of the European Directives 1999/2/EC and 1999/3/EC. The greater international trade in irradiated foods has led to the demand by consumers that irradiated food should be clearly labeled as such and that methods capable of differentiating between irradiated and nonirradiated products should be available. Thus a practical basis was sought to allow consumers to exercise a free choice as to which food they purchase. If a

Recent trend of food irradiation in the world

International Nuclear Information System (INIS)

Hayashi, Tohru

1989-01-01

Forty years have elapsed since the full scale research on food irradiation was begun, and the irradiation of potatoes, which was the first commercial food irradiation in the world, was started in Japan 15 years ago. In 1960s and 1970s, the development of food irradiation technology and the research for the examination of the safety of irradiated foods were mainly carried out. It was clarified that the dose required for obtaining the effect that irradiation aimed at is 0.03-0.2 kGy for suppressing germination and root generation, 0.2-1 kGy for delaying the ripening of fruits, 0.1-1 kGy for killing insects, 1-10 kGy for general sterilization and 25-50 kGy for sterilization, and also the soundness of irradiated foods was confirmed. In 1980s, the practical use of food irradiation became to be advanced in various countries, and the countries where food irradiation is carried out are increasing now. When food irradiation becomes to be actively carried out, the system for managing the execution of food irradiation and the distribution of irradiated foods becomes important, and at present the investigation for creating this system is advanced internationally. The opinion on the soundness of irradiated foods, the state of permission of food irradiation in various countries, the state of practical use of food irradiation in various countries, and the establishment of the management system for food irradiation are described. (K.I.)

MCNPX simulations of the research gamma irradiator at CTEx

International Nuclear Information System (INIS)

Rusin, Tiago; Rebello, Wilson F.; Vellozo, Sergio O.; Gomes, Renato G.; Silva, Ademir X.

2011-01-01

An accurate knowledge of the dose rate distribution inside an irradiating facility is needed in order to ensure safety and guarantee efficient treatment of materials by exposure to ionizing radiation, since insufficient doses may not produce the desired effects whereas exceeding ones can compromise the properties of the irradiated items. Described in this work, are Monte Carlo simulations of the cavity-type research irradiating facility at Centro Tecnologico do Exercito performed by using the MCNPX radiation transport code. The calculations were intended to provide a better understanding of the measured dose rate distributions produced by a 42-kCi cesium- 137 source, also modeling unmapped regions of interest, either inside or outside the irradiation chambers, such as in experimental channels, or next to the moveable door and across unmapped regions of the chambers, in order to investigate scattering and attenuation of the fluxes and softening of the gamma spectrum and to predict dose rates in case of an accidental opening of the shielded door with the source out of its shielded cask. Results from calculations have been compared to measurements performed with chemical dosimeters. Comparative analyses have consistently shown a very good agreement between calculated and measured relative dose rate distributions and provided an improved knowledge on the gamma ray environment produced by the irradiator. (author)

MCNPX simulations of the research gamma irradiator at CTEx

Energy Technology Data Exchange (ETDEWEB)

Rusin, Tiago; Rebello, Wilson F.; Vellozo, Sergio O.; Gomes, Renato G., E-mail: tiagorusin@ime.eb.b, E-mail: rebello@ime.eb.b, E-mail: vellozo@cbpf.b, E-mail: renatoguedes@ime.eb.b [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil). Dept. de Engenharia Nuclear; Vital, Helio C., E-mail: vital@ctex.eb.b [Centro Tecnologico do Exercito (CTEx), Rio de Janeiro, RJ (Brazil); Silva, Ademir X., E-mail: ademir@con.ufrj.b [Universidade Federal do Rio de Janeiro (PEN/COPPE/UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-Graduacao de Engenharia. Programa de Engenharia Nuclear

2011-07-01

An accurate knowledge of the dose rate distribution inside an irradiating facility is needed in order to ensure safety and guarantee efficient treatment of materials by exposure to ionizing radiation, since insufficient doses may not produce the desired effects whereas exceeding ones can compromise the properties of the irradiated items. Described in this work, are Monte Carlo simulations of the cavity-type research irradiating facility at Centro Tecnologico do Exercito performed by using the MCNPX radiation transport code. The calculations were intended to provide a better understanding of the measured dose rate distributions produced by a 42-kCi cesium- 137 source, also modeling unmapped regions of interest, either inside or outside the irradiation chambers, such as in experimental channels, or next to the moveable door and across unmapped regions of the chambers, in order to investigate scattering and attenuation of the fluxes and softening of the gamma spectrum and to predict dose rates in case of an accidental opening of the shielded door with the source out of its shielded cask. Results from calculations have been compared to measurements performed with chemical dosimeters. Comparative analyses have consistently shown a very good agreement between calculated and measured relative dose rate distributions and provided an improved knowledge on the gamma ray environment produced by the irradiator. (author)

Irradiated stainless steel material constitutive model for use in the performance evaluation of PWR pressure vessel internals

Energy Technology Data Exchange (ETDEWEB)

Rashid, J.Y.; Dunham, R.S. [ANATECH (United States); Demma, A. [Electric Power Research Institute - EPRI (United States)

2011-07-01

Demonstration of component functionality requires analytical simulations of reactor internals behavior. Towards that aim, EPRI has undertaken the development of irradiated material constitutive model and damage criteria for use in global and local finite-element based functionality analysis methodology. The constitutive behavioral regimes of irradiated stainless steel types 316 and 304 materials included in the model consist of: elastic-plastic material response considering irradiation hardening of the stress-strain curve, irradiation creep, stress relaxation, and void swelling. IASCC and degradation of ductility with irradiation are the primary damage mechanisms considered in the model. The material behavior model development consists of two parts: the first part is a user-material subroutine that can interface with a general-purpose finite element computer program to adapt it to the special-purpose of functionality analysis of reactor internals. The second part is a user utility in the form of Excel Spread sheets that permit users to extract a given property, e.g. the elastic-plastic stress-strain curve, creep curve, or void-swelling curve, as function of the relevant independent variables. The development of the model takes full advantage of the significant work that has been undertaken within EPRI's Material Reliability Program (MRP) to improve the knowledge of the material properties of irradiated stainless steels. Data from EPRI's MRP database have been utilized to develop equations that characterize the yield strength, ultimate tensile strength, uniform elongation, total elongation, reduction in area, void swelling and irradiation creep of stainless steels in a PWR environment. It is noted that, while the development of the model's equations has been statistically faithful to the material database, approximations were introduced in the model to ensure appropriate conservatism in the model's application consistently with accepted

International tuberculosis research collaborations within Asia.

Science.gov (United States)

Molton, James S; Singh, Shweta; Chen, Ling Jun; Paton, Nicholas I

2017-09-07

Asia bears more than half the global tuberculosis (TB) burden. Economic development in the region has increased available funding for biomedical research and opportunity for collaboration. We explored the extent of international tuberculosis research collaborations between institutions within Asia. We conducted a Pubmed search for all articles with tuberculosis in the title published during a 12 month period with at least one author affiliation listed in Asia, then identified international collaborations from institution websites and internet searches. We identified 99 international collaborations involving an institution within Asia, of which only 8 (8.1%) were collaborations between Asian institutions. The remainder were with institutions outside of Asia. The paucity of intra-Asian international research collaboration represents a lost opportunity to optimise regional research funding, capacity building and the development of an Asia-relevant TB research agenda.

Quality assurance for the IAEA International Database on Irradiated Nuclear Graphite Properties

International Nuclear Information System (INIS)

Wickham, A.J.; Humbert, D.

2006-06-01

Consideration has been given to the process of Quality Assurance applied to data entered into current versions of the IAEA International Database on Irradiated Nuclear Graphite Properties. Originally conceived simply as a means of collecting and preserving data on irradiation experiments and reactor operation, the data are increasingly being utilised for the preparation of safety arguments and in the design of new graphites for forthcoming generations of graphite-moderated plant. Under these circumstances, regulatory agencies require assurances that the data are of appropriate accuracy and correctly transcribed, that obvious errors in the original documentation are either highlighted or corrected, etc., before they are prepared to accept analyses built upon these data. The processes employed in the data transcription are described in this document, and proposals are made for the categorisation of data and for error reporting by Database users. (author)

A forecast of the thyroid pathology at the children irradiated prenatally

International Nuclear Information System (INIS)

Akulich, N.S.

1995-01-01

It is investigated a state of the hypophysis thyroid system at 44 pregnant women in age 19-36 years, which were irradiated by low dozes during the Chernobyl NPP accident and evacuated from the contaminated zone in first 10 days. The average doze of internal irradiation of the thyroid for pregnant women is equal 4,374 +- 1,364 mGy and for irradiated prenatally children -5,283 +- 1,454 mGy. The researches of free thyroxine, triiodothyronine and thyroxine binding globulin were done by the radiation immunological method in a venous blood serum, and a thyrotropic hormone - by a set of the 'CIS Bio International' firm. The diagnosis of the thyroid pathology was confirmed by a ultrasonic research and determination of contents of thyroid hormones. The account of the internal irradiation dozes for a thyroid was conducted by means of a use of a single exponential model of a removing of iodine 131. The fetus' thyroid irradiation doze owing to a entering of radioisotopes to the mother's body was estimated by means of the dose rate on the basis of the Johnson three component model. Direct correlation between the thyroid function at pregnant women, which were irradiation by low doses, and frequency of occurrence of an endemic goiter at the children irradiated prenatally is established. At the contents of the free thyroxine 128,9 +- 4,8 nmol/l or more, triiodothyronine 1,9 +- 0,2 nmol/l or less and increase of an activity of thyrotropic hormone from 1,3 +- 0,1 μU/ml in 12 - 27 weeks of pregnancy up to 1,9 +- 0,2 μU/ml in 38-40 weeks it is possible to predict an occurrence of the thyroid pathology at the future child. Is offered to use from the 12-weak term of pregnancy a radiation immunological method of research of thyrotropic and thyroid hormones of pregnant women, subjected to radiation effect, for preventive maintenance and revealing of early disorders of a thyroid at the children irradiated prenatally. 10 refs., 1 tab

International Journal of Health Research

African Journals Online (AJOL)

Erah

The International Journal of Health Research is an online international journal ... disciplines (including medicine, pharmacy, nursing, biotechnology, cell and ... collaboration among scientists, the industry and the healthcare professionals.

Mitigation of radiation nephropathy after internal α-particle irradiation of kidneys

International Nuclear Information System (INIS)

Jaggi, Jaspreet Singh; Seshan, Surya V.; McDevitt, Michael R.; Sgouros, George; Hyjek, Elizabeth; Scheinberg, David A.

2006-01-01

Purpose: Internal irradiation of kidneys as a consequence of radioimmunotherapy, radiation accidents, or nuclear terrorism can result in radiation nephropathy. We attempted to modify pharmacologically, the functional and morphologic changes in mouse kidneys after injection with the actinium ( 225 Ac) nanogenerator, an in vivo generator of α- and β-particle emitting elements. Methods and Materials: The animals were injected with 0.35 μCi of the 225 Ac nanogenerator, which delivers a dose of 27.6 Gy to the kidneys. Then, they were randomized to receive captopril (angiotensin-converting enzyme inhibitor), L-158,809 (angiotensin II receptor-1 blocker), spironolactone (aldosterone receptor antagonist), or a placebo. Results: Forty weeks after the 225 Ac injection, the placebo-control mice showed a significant increase in blood urea nitrogen (BUN) (87.6 ± 6.9 mg/dL), dilated Bowman spaces, and tubulolysis with basement membrane thickening. Captopril treatment accentuated the functional (BUN 119.0 ± 4.0 mg/dL; p <0.01 vs. placebo controls) and histopathologic damage. In contrast, L-158,809 offered moderate protection (BUN 66.6 ± 3.9 mg/dL; p = 0.02 vs. placebo controls). Spironolactone treatment, however, significantly prevented the development of histopathologic and functional changes (BUN 31.2 ± 2.5 mg/dL; p <0.001 vs. placebo controls). Conclusions: Low-dose spironolactone and, to a lesser extent, angiotensin receptor-1 blockade can offer renal protection in a mouse model of internal α-particle irradiation

IFMIF [International Fusion Materials Irradiation Facility], an accelerator-based neutron source for fusion components irradiation testing: Materials testing capabilities

International Nuclear Information System (INIS)

Mann, F.M.

1988-08-01

The International Fusion Materials Irradiation Facility (IFMIF) is proposed as an advanced accelerator-based neutron source for high-flux irradiation testing of large-sized fusion reactor components. The facility would require only small extensions to existing accelerator and target technology originally developed for the Fusion Materials Irradiation Test (FMIT) facility. At the extended facility, neutrons would be produced by a 0.1-A beam of 35-MeV deuterons incident upon a liquid lithium target. The volume available for high-flux (>10/sup 15/ n/cm/sup 2/-s) testing in IFMITF would be over a liter, a factor of about three larger than in the FMIT facility. This is because the effective beam current of 35-MeV deuterons on target can be increased by a factor of ten to 1A or more. Such an increase can be accomplished by funneling beams of deuterium ions from the radio-frequency quadruple into a linear accelerator and by taking advantage of recent developments in accelerator technology. Multiple beams and large total current allow great variety in available testing. For example, multiple simultaneous experiments, and great flexibility in tailoring spatial distributions of flux and spectra can be achieved. 5 refs., 2 figs., 1 tab

Electron accelerator technology research in food irradiation

International Nuclear Information System (INIS)

Jin Jianqiao; Ye Mingyang; Zhang Yue; Yang Bin; Xu Tao; Kong Xiangshan

2014-01-01

Electronic accelerator was applied to instead of cobalt sources for food irradiation, to keep food quality and to improve the effect of the treatment. Appropriate accelerator parameters lead to optimal technique. The irradiation effect is associated with the relationship between uniformity and irradiating speed, the effect of cargo size on radiation penetration, as well as other factors that affect the irradiation effects. Industrialization of electron accelerator irradiation will be looked to the future. (authors)

Revision of the recommended international general standard for irradiated foods and of the recommended international code of practice for the operation of radiation facilities used for the treatment of foods

International Nuclear Information System (INIS)

1981-11-01

In view of the findings and statements of the Joint FAO/IAEA/WHO Expert Committee on the Wholesomeness of Irradiated Food, convened in Geneva from 27 October to 3 November 1980, a Consultation Group, convened in Geneva from 1 to 3 July 1981 suggested the revision of the Recommended International General Standard for Irradiated Foods and of the Recommended International Code of Practice for the Operation of Radiation Facilities. The proposed changes are given and justified and the revised wording of the documents presented

Food irradiation technology

International Nuclear Information System (INIS)

Cetinkaya, N.

1999-01-01

Trade in food and agricultural products is important to all countries, the economies of many developing countries would be significantly improved if they were able to export more food and agricultural products. Unfortunately, many products can not be traded because they are infested with, or hosts to, harmful pests, contaminated with microorganisms, or spoil quickly. Foods contaminated with microorganisms cause economic losses, widespread illness and death. Several technologies and products have been developed to resolve problems in trading food and to improve food safety, but none can provide all the solutions. Irradiation is an effective technology to resolve technical problems in trade of many food and agricultural products, either as a stand- alone technology or in combination with others. As a disinfestation treatment it allows different levels of quarantine security to be targeted and it is one of few methods to control internal pests. The ability of irradiation virtually to eliminate key pathogenic organisms from meat, poultry, and spices is an important public health advantage. In addition to controlling pests and eliminating harmful bacteria, irradiation also extends the storage life of many foods. In the laboratories of Turkish Atomic Energy Authority, many research projects were completed on the effects of gamma irradiation to the storage life of chicken meat, anchovy, Turkish fermented sausage, dried and fresh fruits and vegetables and also research projects were conducted on the effects of gamma irradiation on microorganisms (Salmonella, Campylo-bacteria, E.coli and S.aureus in white and red meat) and parasites (food-borne, trichostrongylus spp. and Nematodes spp.)

Optimization of the irradiation beam in the BNCT research facility at IEA-R1 reactor

International Nuclear Information System (INIS)

Castro, Vinicius Alexandre de

2014-01-01

Boron Neutron Capture Therapy (BNCT) is a radiotherapeutic technique for the treatment of some types of cancer whose useful energy comes from a nuclear reaction that occurs when thermal neutron impinges upon a Boron-10 atom. In Brazil there is a research facility built along the beam hole number 3 of the IEA-R1 research reactor at IPEN, which was designed to perform BNCT research experiments. For a good performance of the technique, the irradiation beam should be mostly composed of thermal neutrons with a minimum as possible gamma and above thermal neutron components. This work aims to monitor and evaluate the irradiation beam on the sample irradiation position through the use of activation detectors (activation foils) and also to propose, through simulation using the radiation transport code, MCNP, new sets of moderators and filters which shall deliver better irradiation fields at the irradiation sample position In this work, a simulation methodology, based on a MCNP card, known as wwg (weight window generation) was studied, and the neutron energy spectrum has been experimentally discriminated at 5 energy ranges by using a new set o activation foils. It also has been concluded that the BNCT research facility has the required thermal neutron flux to perform studies in the area and it has a great potential for improvement for tailoring the irradiation field. (author)

Food Irradiation Technology in the Philippines

International Nuclear Information System (INIS)

De Guzman, Zenaida M.

2015-01-01

The applications of ionizing radiation for the preservation of food and agricultural products by delaying ripening, destruction of insect pests and pathogenic microorganisms have shown great promise in the country. For more than 30 years, the Philippine Nuclear Research Institute (PNRI) in collaboration with other government and private sectors, has undertaken research and development studies and pilot and semi-commercial scale irradiation of foods. Some of the foods found to be benefit from the use of irradiation technology are mangoes and papayas for disinfestations and delay ripening; onions and garlic for inhibition of sprouting; spices and dehydrated products for reduction of microbial growth and rice and corn for insect and shelf-life extension. Two regulations approved by the Department of Health and the Bureau of Plant Industry are in place creating an enabling environment for food safety and trade of irradiated food. The conduct of awareness program in various parts of the country provided knowledge and information about the food irradiation technology. The Institute has been part of the international projects (IAEA and USDA) on the use of irradiation for sanity and phytosanitary treatment of food. The projects not only established the potential benefits of food irradiation for socio-economic development of the country but also built considerable capacity to properly treat foods. Some of the recent developments in the area of food irradiation include publication of Philippine National Standard (PNS) on Food Irradiation: Code of Good Irradiation Practices which will serve as a guide for stakeholders to irradiate food, a newly-established Electron Beam Facility to demonstrate the potential use of EB and a feasibility study of putting-up a commercial irradiation facility in the country. (author)

Proceedings of 2012 JAEA/KAERI joint seminar on advanced irradiation and PIE technologies

International Nuclear Information System (INIS)

Ishihara, Masahiro; Ishitsuka, Etsuo; Suzuki, Masahide

2012-12-01

Under the 'Arrangement for Corporation in the field of peaceful uses of Nuclear Energy between the Japan Atomic Energy Agency (JAEA) and the Korean Atomic Energy Research Institute (KAERI)', the 2012 JAEA/KAERI Joint Seminar on Advanced Irradiation and PIE (post-irradiation examination) Technologies has been held at Mito, Japan from March 28 to 30, 2012. This triennial seminar is the seventh in series of bilateral exchange of irradiation and PIE technologies and research reactor management. Since the first joint seminar on the PIE Technology between JAERI (Japan Atomic Energy Research Institute, former agency of JAEA) and KAERI was held at JAERI Oarai Research Institute, Japan in 1992, the international cooperation program between JAEA and KAERI has been actively carried out in the field of neutron irradiation. At the fifth seminar in 2005 and sixth in 2008, the irradiation technology and the research reactor management fields were included, respectively, to the joint seminar, and it covers whole areas of irradiation using research reactors. In this seminar total 37 presentations were made in three technical sessions, which are 'research reactor management', 'advanced irradiation technology' and 'post-irradiation examination technology', and active information exchange was done among participants. Papers or manuscripts presented in the 2012 JAEA/KAERI Joint Seminar on Advanced Irradiation and PIE Technologies are contained in the proceedings. (author)

Accelerator conceptual design of the international fusion materials irradiation facility

International Nuclear Information System (INIS)

Sugimoto, M.; Kinsho, M.; Teplyakov, V.; Berwald, D.; Bruhwiler, D.; Peakock, M.; Rathke, J.; Deitinghoff, H.; Klein, H.; Pozimski, Y.; Volk, K.; Miyahara, A.; Olivier, M.; Piechowiak, E.; Tanabe, Y.

1998-01-01

The accelerator system of the international fusion materials irradiation facility (IFMIF) provides the 250-mA, 40-MeV continuous-wave deuteron beam at one of the two lithium target stations. It consists of two identical linear accelerator modules, each of which independently delivers a 125-mA beam to the common footprint of 20 cm x 5 cm at the target surface. The accelerator module consists of an ion injector, a 175 MHz RFQ and eight DTL tanks, and rf power supply system. The requirements for the accelerator system and the design concept are described. The interface issues and operational considerations to attain the proposed availability are also discussed. (orig.)

Peculiarities of intestine injuries in case of internal and external irradiation: a morphometric study

International Nuclear Information System (INIS)

Ponomareva, T.V.

1988-01-01

It is shown that sterological cell parameters and indexes of their interaction may serve as an important characteristic of tissue postirradiation recovery quality permitting to give a precise quantitative characteristic of cell differentiation and dedifferentiation. It is established that enterocyte maturation is sharphy broken under irradiation. Population delamination into sublines differing in cell size takes place. The number of these cells depends on radiation doses. The most labile cell componenet is cell nucleoli. The cell differentiation breakage is more pronounced in case of internal irradiation (Ce 144 ) and in combined radiation effect. A degree of cell differentiation breakage depends on peroxidation level. The obtained data can be used in developing and evaluating radioprotective substances

Influence of geometrical parameters of the VVER-1000 reactor construction elements to internals irradiation conditions

Directory of Open Access Journals (Sweden)

О. M. Pugach

2015-07-01

Full Text Available Investigations to determine the influences of geometrical parameters of the calculational VVER-1000 reactor model to the results of internal irradiation condition determination are carried out. It is shown that the values of appropriate sensitivity matrix elements are not dependent on a height coordinate for any core level, but there is their azimuthal dependence. Maximum possible relative biases of neutron fluence due to inexact knowledge of internal geometrical parameters are obtained for the baffle and the barrel.

Available post-irradiation examination techniques at Romanian institute for nuclear research

International Nuclear Information System (INIS)

Parvan, Marcel; Sorescu, Antonius; Mincu, Marin; Uta, Octavian; Dobrin, Relu

2005-01-01

The Romanian Institute for Nuclear Research (INR) has a set of nuclear facilities consisting of TRIGA 14 MW(th) materials testing reactor and LEPI (Romanian acronym for post-irradiation examination laboratory) which enable to investigate the behaviour of the nuclear fuel and materials under various irradiation conditions. The available techniques of post-irradiation examination (PIE) and purposes of PIE for CANDU reactor fuel are as follows. 1) Visual inspection and photography by periscope: To examine the surface condition such as deposits, corrosion etc. 2) Eddy current testing: To verify the cladding integrity. 3) Profilometry and length measurement performed both before and after irradiation: To measure the parameters which highlight the dimensional changes i.e. diameter, length, diametral and axial sheath deformation, circumferential sheath ridging height, bow and ovality. 4) Gamma scanning and Tomography: To determine the burnup, axial and radial fission products activity distribution and to check for flux peaking and loading homogeneity. 5) Puncture test: To measure the pressure, volume and composition of fission gas and the inner free volume. 6) Optical microscopy: To highlight the structural changes and hydriding, to examine the condition of the fuel-sheath interface and to measure the oxide thickness and Vickers microhardness. 7) Mass spectrometry: To measure the burnup. 8) Tensile testing: To check the mechanical properties. So far, non-destructive and destructive post-irradiation examinations have been performed on a significant number of CANDU fuel rods (about 100) manufactured by INR and irradiated to different power histories in the INR 14 MW(th) TRIGA reactor. These examinations have been performed as part of the Romanian research programme for the manufacturing, development and safety of the CANDU fuel. The paper describes the PIE techniques and some results. (Author)

Current status of food irradiation in Korea

International Nuclear Information System (INIS)

Kwon, Joong-Ho

2007-01-01

With respect to the safety of irradiated food, the Korean government has accepted in principle the recommendations of international organization (FAO, WHO, IAEA, CAC, etc) as well as the national-based evaluations. Gamma radiation from Co-60 is now authorized to be used for food irradiation of 26 food items (or classes). Two multipurpose gamma-irradiation facilities (Greenpia Tech. Inc. since 1987; SOYA Co. Ltd. since 2002) are now operating for the treatments of selected food items as well as medical supplies. At present, labeled-irradiated products are not yet being marketed at the consumer level. As an alternative process of chemical fumigants, however, irradiation is being partially utilized for the microbial decontamination and pest control of dried spices, vegetable ingredients, etc. for their use in processed foods as minor ingredients. Commercial applications of food irradiation, though small in number, have been steady ever since. This article introduces the commercial progress in food irradiation technology in Korea in terms of research activities, legislation, commercialization, and the control of irradiated foods. (author)

International Journal of Health Research

African Journals Online (AJOL)

Erah

The International Journal of Health Research is an online international journal ... The journal is devoted to the promotion of health sciences and related disciplines (including medicine, pharmacy, nursing, biotechnology, cell and molecular ...

Technology of food preservation by irradiation

International Nuclear Information System (INIS)

Thomas, Paul

1997-01-01

Food Technology Division, Bhabha Atomic Research Centre, Mumbai has demonstrated that radiation processing of foods can contribute to nations food security by reducing post-harvest losses caused by insect infestation, microbial-spoilage and physiological changes. The technology has commercial potential for the conservation of cereals, pulses and their products, spices, onions, potatoes, garlic, some tropical fruits, sea foods, meat and poultry. Irradiation can ensure hygienic quality in foods including frozen foods by eliminating food borne pathogens and parasitic organisms. It offers a viable environment friendly alternative to chemical fumigants for quarantine treatment against insect pests in agricultural and horticultural products entering international trade. The safety and nutritional adequacy of irradiated foods for human consumption is well established. About 40 countries including India have regulations permitting irradiation of foods and 28 countries are irradiating foods for processing industries and institutional catering

Animal Research International: Advanced Search

African Journals Online (AJOL)

PROMOTING ACCESS TO AFRICAN RESEARCH ... Animal Research International: Advanced Search ... containing either term; e.g., education OR research; Use parentheses to create more complex queries; e.g., ... Journal of Biomedical Research, African Journal of Biotechnology, African Journal of Chemical Education ...

The international atom

Energy Technology Data Exchange (ETDEWEB)

NONE

1962-12-31

The film explains in basic terms nuclear fission, the use of nuclear power (propulsion of ships), the production and use of radioisotopes (medicine-radioactive tracers, sterilization of instruments; agriculture-fertilizers, screw-worm elimination, irradiation of food; industry). Demonstrates international co-operation and research in the nuclear field

Staged deployment of the International Fusion Materials Irradiation Facility

International Nuclear Information System (INIS)

Takeuchi, H.; Sugimoto, M.; Nakamura, H.

2001-01-01

The International Fusion Materials Irradiation Facility (IFMIF) employs an accelerator based D-Li intense neutron source as defined in the 1995-96 Conceptual Design Activity (CDA) study. In 1999, IEA mandated a review of the CDA IFMIF design for cost reduction without change to its original mission. This objective was accomplished by eliminating the previously assumed possibility of potential upgrade of IFMIF beyond the user requirements. The total estimated cost was reduced from $797.2 M to $487.8 M. An option of deployment in 3 stages was also examined to reduce the initial investment and annual expenditures during construction. In this scenario, full performance is achieved gradually with each interim stage as follows. 1st Stage: 20% operation for material selection for ITER breeding blanket, 2nd Stage: 50% operation to demonstrate materials performance of a reference alloy for DEMO, 3rd Stage: full performance operation ( 2MW/m 2 at 500cm 3 ) to obtain engineering data for potential DEMO materials under irradiation up to 100-200 dpa. In summary, the new, reduced cost IFMIF design and staged deployment still satisfies the original mission. The estimated cost of the 1st Stage facility is only $303.6 M making it financially much more attractive. Currently, IFMIF Key Element Technology Phase (KEP) is underway to reduce the key technology risk factors. (author)

International Space Station Research for the Next Decade: International Coordination and Research Accomplishments

Science.gov (United States)

Thumm, Tracy L.; Robinson, Julie A.; Johnson-Green, Perry; Buckley, Nicole; Karabadzhak, George; Nakamura, Tai; Sorokin, Igor V.; Zell, Martin; Sabbagh, Jean

2011-01-01

During 2011, the International Space Station reached an important milestone in the completion of assembly and the shift to the focus on a full and continuous utilization mission in space. The ISS partnership itself has also met a milestone in the coordination and cooperation of utilization activities including research, technology development and education. We plan and track all ISS utilization activities jointly and have structures in place to cooperate on common goals by sharing ISS assets and resources, and extend the impacts and efficiency of utilization activities. The basic utilization areas on the ISS include research, technology development and testing, and education/outreach. Research can be categorized as applied research for future exploration, basic research taking advantage of the microgravity and open space environment, and Industrial R&D / commercial research focused at industrial product development and improvement. Technology development activities range from testing of new spacecraft systems and materials to the use of ISS as an analogue for future exploration missions to destinations beyond Earth orbit. This presentation, made jointly by all ISS international partners, will highlight the ways that international cooperation in all of these areas is achieved, and the overall accomplishments that have come as well as future perspectives from the cooperation. Recently, the partnership has made special efforts to increase the coordination and impact of ISS utilization that has humanitarian benefits. In this context the paper will highlight tentative ISS utilization developments in the areas of Earth remote sensing, medical technology transfer, and education/outreach.

Australian International Food Security Research Centre | IDRC ...

International Development Research Centre (IDRC) Digital Library (Canada)

Australian International Food Security Research Centre. Australian International Food Security Research Centre. http://aciar.gov.au/AIFSC. Cultivate Africa's Future. The Cultivate Africa's Future research partnership is designed to support applied research to combat hunger in sub-Saharan Africa by harnessing the potential ...

International Research Results and Accomplishments From the International Space Station

Science.gov (United States)

Ruttley, Tara M.; Robinson, Julie A.; Tate-Brown, Judy; Perkins, Nekisha; Cohen, Luchino; Marcil, Isabelle; Heppener, Marc; Hatton, Jason; Tasaki, Kazuyuki; Umemura, Sayaka;

Use of studies with laboratory animals to assess the potential early health effects of combined internal alpha and beta irradiation

International Nuclear Information System (INIS)

Scott, B.R.; Hahn, F.F.; Guilmette, R.A.; Muggenburg, B.A.; Snipes, M.B.; Boecker, B.B.; McClellan, R.O.

1986-01-01

The potential health impacts of radionuclides released in nuclear accidents are of major concern to the public and to regulatory and other governmental agencies. One mode of potential exposure is by inhalation of airborne radionuclides, which could lead to combined internal irradiation by high (alpha) and low (beta) linear energy transfer (LET) radiations. Epidemiological data for health effects of human inhalation exposure are too limited to derive reliable estimates of risks of potential health effects. However, results of studies in which beagle dogs were exposed by inhalation to insoluble radioactive aerosols can be used to estimate expected effects in humans. Data for mortality from radiation pneumonitis and pulmonary fibrosis caused by internal irradiation of dog lungs by alpha or beta radiations are used to derive the relative biological effectiveness (RBE) of alpha irradiation compared to beta irradiation; predict the expected combined effects of alpha and beta irradiation of dog lungs; and extrapolate the results to humans. The extrapolation to humans assumed that, for similar ages at exposure, dog and human lungs have similar sensitivities to lung irradiation. Results of theoretical calculations related to mortality from early effects indicated that the synergistic effects of high- and low-LET radiations should depend on the percentages of the total dose contributed by high- and low-LET radiations, and for very low or very high doses, synergistic effects should be negligible. 23 refs., 8 figs

Technical review on irradiation tests and post-irradiation examinations in JMTR

International Nuclear Information System (INIS)

2017-07-01

The Japan Materials Testing Reactor (JMTR) has been contributing to various R and D activities in the nuclear research such as the fundamental research of nuclear materials/ fuels, safety research and development of power reactors, radio isotope (RI) production since its beginning of the operation in 1968. Irradiation technologies and post irradiation examination (PIE) technologies are the important factors for irradiation test research. Moreover, these technologies induce the breakthrough in area of nuclear research. JMTR has been providing unique capabilities for the irradiation test research for about 40 years since 1968. In future, any needs for irradiation test research used irradiation test reactors will continue, such as R and D of generation 4 power reactors, fundamental research of materials/fuels, RI production. Now, decontamination and new research reactor construction are common issue in the world according to aging. This situation is the same in Japan. This report outlines irradiation and PIE technologies developed at JMTR in 40 years to contribute to the technology transfer and human resource development. We hope that this report will be used for the new research rector design as well as the irradiation test research and also used for the human resource development of nuclear engineers in future. (author)

Thermohydraulic design of saturated temperature capsule for IASCC irradiation test

International Nuclear Information System (INIS)

Ide, Hiroshi; Matsui, Yoshinori; Itabashi, Yukio

2002-10-01

An advanced water chemistry controlled irradiation research device is being developed in JAERI, to perform irradiation tests for irradiation assisted stress corrosion cracking (IASCC) research concerned with aging of LWR. This device enables the irradiation tests under the water chemistry condition and the temperature, which simulate the conditions for BWR core internals. The advanced water chemistry controlled irradiation research device is composed of saturated temperature capsule inserted into the JMTR core and the water chemistry control unit installed in the reactor building. Regarding the saturated temperature capsule, the Thermohydraulic design of capsule structure was done, aimed at controlling the specimen's temperature, feeding water velocity on specimen's surface to the environment of BWR nearer. As the result of adopting the new capsule structure based on the design study, it was found out that feeding water velocity at the surface of specimen's is increased to about 10 times as much as before, and nuclear heat generated in the capsule components can be removed safely even in the abnormal event such as the case of loss of feeding water. (author)

Thermohydraulic design of saturated temperature capsule for IASCC irradiation test

Energy Technology Data Exchange (ETDEWEB)

Ide, Hiroshi; Matsui, Yoshinori; Itabashi, Yukio [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment] [and others

2002-10-01

An advanced water chemistry controlled irradiation research device is being developed in JAERI, to perform irradiation tests for irradiation assisted stress corrosion cracking (IASCC) research concerned with aging of LWR. This device enables the irradiation tests under the water chemistry condition and the temperature, which simulate the conditions for BWR core internals. The advanced water chemistry controlled irradiation research device is composed of saturated temperature capsule inserted into the JMTR core and the water chemistry control unit installed in the reactor building. Regarding the saturated temperature capsule, the Thermohydraulic design of capsule structure was done, aimed at controlling the specimen's temperature, feeding water velocity on specimen's surface to the environment of BWR nearer. As the result of adopting the new capsule structure based on the design study, it was found out that feeding water velocity at the surface of specimen's is increased to about 10 times as much as before, and nuclear heat generated in the capsule components can be removed safely even in the abnormal event such as the case of loss of feeding water. (author)

Minority International Research Training Program: Global Collaboration in Nursing Research.

Science.gov (United States)

McElmurry, Beverly J.; Misner, Susan J.; Buseh, Aaron G.

2003-01-01

The Minority International Research Training Program pairs minority nursing students with faculty mentors at international sites for short-term research. A total of 26 undergraduate, 22 graduate, and 6 postdoctoral students have participated. Challenges include recruitment, orientation, and preparation of students; identification and preparation…

Internal Validity: A Must in Research Designs

Science.gov (United States)

Cahit, Kaya

2015-01-01

In experimental research, internal validity refers to what extent researchers can conclude that changes in dependent variable (i.e. outcome) are caused by manipulations in independent variable. The causal inference permits researchers to meaningfully interpret research results. This article discusses (a) internal validity threats in social and…

Emerging Economies Research Dialogue | IDRC - International ...

International Development Research Centre (IDRC) Digital Library (Canada)

This grant will allow the Indian Council for Research on International Economic Relations to bridge the gap by organizing two research dialogues in the form of international conferences for emerging economy professionals, academics and policymakers on issues of contemporary relevance to the global economy and polity.

Search | IDRC - International Development Research Centre

International Development Research Centre (IDRC) Digital Library (Canada)

Social exclusion, poor economic opportunities, restrictive gender roles, and lack of access to basic services for certain groups are some of the main factors ... Canadian International Food Security Research Fund | IDRC ... The Canadian International Food Security Research Fund (CIFSRF) invests in scaling up solutions that ...

Accelerator conceptual design of the international fusion materials irradiation facility

Energy Technology Data Exchange (ETDEWEB)

Sugimoto, M.; Kinsho, M. [Japan Atomic Energy Res. Inst., Tokai, Ibaraki (Japan). Intense Neutron Source Lab.; Jameson, R.A.; Blind, B. [Los Alamos National Lab., NM (United States); Teplyakov, V. [Institute for High Energy Physics, Moscow (Russian Federation); Berwald, D.; Bruhwiler, D.; Peakock, M.; Rathke, J. [Northrop Grumman Corp., Bethpage, NY (United States); Deitinghoff, H.; Klein, H.; Pozimski, Y.; Volk, K. [Johann Wolfgang Goethe Univ., Frankfurt (Germany). Inst. fur Angewandte Phys.; Ferdinand, R.; Lagniel, J.-M. [CEA Saclay LNS, Gif-sur-Yvette (France); Miyahara, A. [Teikyo Univ., Tokyo (Japan); Olivier, M. [CEA DSM, Saclay, Gif-sur-Yvette (France); Piechowiak, E. [Northrop Grumman Corp., Baltimore, MD (United States); Tanabe, Y. [Toshiba Corp., Tsurumi-ku, Yokohama (Japan)

1998-10-01

The accelerator system of the international fusion materials irradiation facility (IFMIF) provides the 250-mA, 40-MeV continuous-wave deuteron beam at one of the two lithium target stations. It consists of two identical linear accelerator modules, each of which independently delivers a 125-mA beam to the common footprint of 20 cm x 5 cm at the target surface. The accelerator module consists of an ion injector, a 175 MHz RFQ and eight DTL tanks, and rf power supply system. The requirements for the accelerator system and the design concept are described. The interface issues and operational considerations to attain the proposed availability are also discussed. (orig.) 8 refs.

Canadian International Food Security Research Fund (CIFSRF ...

International Development Research Centre (IDRC) Digital Library (Canada)

Canadian International Food Security Research Fund (CIFSRF). The Canadian International Food Security Research Fund (CIFS-RF) is a collaborative program of the Canadian International Development Agency (CIDA) and IDRC valued at CA $61 654 707 (CIDA: CA $50 000 000; IDRC: CA $11 654 707). The program ...

Food irradiation: advantages and limitations

International Nuclear Information System (INIS)

Hernandes, N.K.; Vital, H. de C.; Sabaa-Srur, A.U.O.

2003-01-01

Food irradiation is a physical method of processing food (e.g. freezing, canning). It has been thoroughly researched over the last four decades and is recognized as a safe and wholesome method. It has the potential both of disinfesting dried food to reduce storage losses and disinfesting fruits and vegetables to meet quarantine requirements for export trade. Low doses of irradiation inhibit spoilage losses due to sprouting of root and tuber crops. Food- borne diseases due to contamination by pathogenic microorganisms and parasites of meat, poultry, fish, fishery products and spices are on the increase. Irradiation of these solid foods can decontaminate them of pathogenic organisms and thus provide safe food to the consumer. Irradiation can successfully replace the fumigation treatment of cocoa beans and coffee beans and disinfest dried fish, dates, dried fruits, etc. One of the most important advantages of food irradiation processing is that it is a coldprocess which does not significantly alter physico-chemical characters of the treated product. It can be applied to food after its final packaging. Similar to other physical processes of food processing, (e.g. canning, freezing), irradiation is a capital intensive process. Thus, adequate product volume must be made available in order to maximize the use of the facility and minimize the unit cost of treatment. Lack of harmonization of regulations among the countries which have approved irradiated foods hampers the introduction of this technique for international trade. Action at the international level has to be taken in order to remedy this situation. One of the important limitations of food irradiation processing is its slow acceptance by consumers, due inter alia to a perceived association with radioactivity. The food industry tends to be reluctant to use the technology in view of uncertainties regarding consumer acceptance of treated foods. Several market testing and consumer acceptance studies have been carried

ESR identification of irradiated foodstuffs: LARQUA research

Energy Technology Data Exchange (ETDEWEB)

Raffi, J [Laboratoire de Recherche sur la Qualite des Aliments, Marseille (France)

1997-12-31

As electron spin resonance (ESR) spectroscopy is the leading method for identification of irradiated foodstuffs, meat and fish bones, fruit and relative products (of vegetable origin), sea-food etc. were studied. In order to prepare a large co-trial on ESR identification of irradiation of irradiated foodstuffs, experiments were carried out at LARQUA, especially on fruits and vegetables. The radicals induced in the fruit pulp are not stable because the water content of fruit is generally high, but ESR can be used with dried fruit or dry components such as achenes, pips or stones. Different responses are observed, depending on the fruit. In ``sugatype`` fruits (papaya, dried grapes), an ESR multicomponent signal is radio-induced, but the non-irradiated fruit presents no ESR signal or a single-line, while in ``cellulose type`` fruits (pistachio nut, berries), a triplet is induced. But a six line signal due to Mn{sup 2+} and a central single line may also be present both in irradiated and non-irradiated samples. In the case of aromatic herbs, the proposed official CEN protocol for irradiated food containing cellulose was used. (author).

ESR identification of irradiated foodstuffs: LARQUA research

International Nuclear Information System (INIS)

Raffi, J.

1996-01-01

As electron spin resonance (ESR) spectroscopy is the leading method for identification of irradiated foodstuffs, meat and fish bones, fruit and relative products (of vegetable origin), sea-food etc. were studied. In order to prepare a large co-trial on ESR identification of irradiation of irradiated foodstuffs, experiments were carried out at LARQUA, especially on fruits and vegetables. The radicals induced in the fruit pulp are not stable because the water content of fruit is generally high, but ESR can be used with dried fruit or dry components such as achenes, pips or stones. Different responses are observed, depending on the fruit. In ''sugatype'' fruits (papaya, dried grapes), an ESR multicomponent signal is radio-induced, but the non-irradiated fruit presents no ESR signal or a single-line, while in ''cellulose type'' fruits (pistachio nut, berries), a triplet is induced. But a six line signal due to Mn 2+ and a central single line may also be present both in irradiated and non-irradiated samples. In the case of aromatic herbs, the proposed official CEN protocol for irradiated food containing cellulose was used. (author)

Ethical and social implications of microdosing clinical trial (3). Radiological protection of human subjects in research

International Nuclear Information System (INIS)

Kurihara, Chieko

2008-01-01

Internal irradiation of human subjects in research is discussed. Radiological protection of human subjects in medical research in a framework of radiation protection is surveyed from a viewpoint of general life-ethics and research-ethics. A workshop 'On the internal irradiation of human subjects' to summarize special and systematic knowledge was organized by Research Center for Radiation Protection, National Institute of Radiological Sciences in the beginning of 2008. Activities of this workshop are introduced. Discussion covers also (1) Research ethics and radiation protection, (2) Fundamentals and applications of risk-benefit assessment, (3) Human subjects risk assessment in ICRP recommendation, (4) Mechanism of human subjects internal irradiation assessment, and (5) Present status and future prospects in Japan. (K.Y.)

Wholesomeness assessment of irradiated food and its radiolysis products. A review on history and validity of food irradiation

International Nuclear Information System (INIS)

Ito, Hitoshi

2007-01-01

A brief history of food processes using irradiation is presented with focusing on such specific problems as possible induction of radioactivity by using high-energy X-rays or electron beams and possible formation of mutants or nutritive breakdown of the food. The basis of the argument is mainly the researches carried out in 1960's in USA and 1970's in UK and France, and also Food and Drug Administration (FDA) results on evaluation of wholesomeness of irradiated food using animal breeding during 1954 to 1980. An extensive study on safety test as food and qualifying test for nutrition carried out by the international project group (USA, France, West Germany, Netherlands, UK, and Japan) are also included as an important basis. The author concludes that the safety of food irradiation is well confirmed by continuous researches which have been widely done for these 60 years, as have been guaranteed by WHO. (S. Ohno)

Standardization of an irradiation field using 60Co and 137Cs sources (at Radioisotope Research Centre of Osaka University)

International Nuclear Information System (INIS)

Yamaguchi, Y.; Yamashito, J.; Yamamoto, T.; Yamamoto, J.; Nomura, T.

1996-01-01

On the occasion of installing the γ-ray irradiation system for animal experiments at the Radioisotope Research Center of Osaka University both lead collimators and shield screen have been supplemented to the system in order to satisfy the Japanese legal regulation that the dose equivalent rate outside the controlled area should be less than 300 μSv/w because the experimental room has not been so designed as to install such an apparatus. The original use of the system is to study the internal β-ray exposure of a small animal on a dosage of tritium water, which will be eliminated from a body with a biological half-life. Accordingly, the dose rate of internal exposure due to β-ray will change with time, and hence such a situation could be simulated with an external exposure due to γ-rays by changing the dose rate spatially, that is, the distance between the γ-ray source and a sample. It is, however, anticipated that improvement of the system would bring increase in the scattered γ-rays at an irradiation point and hence it becomes the purpose of the present paper to obtain precise exposures including scattered γ-rays at each irradiation point for animal experiments and also to find an optimum point for standard calibration where no scattered γ-rays are observed. For that purpose the effect of them will be evaluated with both calculations due to the Monte Carlo code for neutron photon transport (MCNP) and experiments due to the ionization chamber calibrated at the National Bureau of Standard in Japan. (author)

Complications related to conventional self-expandable metal stent insertion and internal irradiation stent insertion in patients with advanced esophageal carcinoma: an analysis of 32 cases

International Nuclear Information System (INIS)

Xu Xingwen; Di Haiting; Zhu Jun; Shi Jian

2011-01-01

Objective: To compare the occurrence of complications between conventional self-expandable metal stent and internal irradiation stent insertion in treating patients with advanced esophageal carcinomas. Methods: A total of 32 patients with advanced esophageal carcinoma were randomly divided into irradiation stent group (n=15) and conventional stent group (n=17). Internal irradiation stent loaded with 125 I seeds was employed in patients of irradiation stent group, while conventional self-expandable metal stent was used in patients of conventional stent group. After the treatment, clinical follow-up was regularly conducted. Postoperative complications such as fever, severe chest pain, cough, esophageal perforation, pneumonia, hemorrhage, stent migration and restenosis, etc. were observed. Results: No significant difference in the occurrence of fever, severe chest pain, esophageal perforation and hemorrhage existed between the two groups (P>0.05). The difference in the occurrence of long-term complications such as stent migration or restenosis between the two groups was out statistically significant (P>0.05). However, the restenosis in irradiation stent group occurred obviously much later than that in conventional stent group. Conclusion: For the treatment of advanced esophageal carcinomas, the insertion of internal irradiation esophageal stent is safe. It dose not increase the incidence of postoperative complications. Therefore, it is worth popularizing this technique in clinical practice. (authors)

Literature study of the radiobiological parameters of Caesium-137 required for evaluating internal irradiation doses as a function of age

International Nuclear Information System (INIS)

Garnier, A.

1968-01-01

This document reassembles information published in scientific literature on radiobiological parameters of Cs-137, necessary for the estimate of the internal irradiation dose of man according to his age (during growth). The data are completed by a commented review of the mathematical models, proposed in order to value the irradiation doses from ingested cesium and the biological parameters. (author) [fr

Internal emitter research and standard setting

International Nuclear Information System (INIS)

Stannard, J.N.

1981-01-01

The history of the use of data from internal emitter research in the derivation of safety standards is reviewed. At first, observed biological effects were correlated with body burdens or exposure levels. This direct approach is illustrated by detailed accounts of the cases of uranium and plutonium. In the 1950's, when it was decided to provide standards for over 200 isotopes, the direct approach was replaced by a system of calculations. This necessitated changes in internal emitter research programs to provide metabolic data, and the development of models such as Reference Man and the Lung and Gastrointestinal Tract models. The continuing contribution of internal emitter research to standard setting can be seen in the references quoted in the metabolic data section of the new ICRP report (ICRP Publication 30). Present trends suggest a possible return to the direct use of internal emitter effects data for obtaining risk estimates. (U.K.)

Canadian International Food Security Research Fund (CIFSRF)

International Development Research Centre (IDRC) Digital Library (Canada)

. The Canadian International Food Security Research Fund(CIFSRF) is a program of Canada's International Development Research. Centre (IDRC) undertaken with the financial support of the. Government of Canada provided through Foreign ...

International Research and Studies Program

Science.gov (United States)

Office of Postsecondary Education, US Department of Education, 2012

2012-01-01

The International Research and Studies Program supports surveys, studies, and instructional materials development to improve and strengthen instruction in modern foreign languages, area studies, and other international fields. The purpose of the program is to improve and strengthen instruction in modern foreign languages, area studies and other…

International Journal of Health Research

African Journals Online (AJOL)

Erah

The International Journal of Health Research is an online international journal allowing ... forum for the communication and evaluation of data, methods and findings in health sciences and related ... Conclusion: Permeation rate of drugs across the ..... New Delhi, McGraw Hill Medical Publishing ... Human skin permeation of.

Internal hydriding in irradiated defected Zircaloy fuel rods: A review (LWBR Development Program)

International Nuclear Information System (INIS)

Clayton, J.C.

1987-10-01

Although not a problem in recent commercial power reactors, including the Shippingport Light Water Breeder Reactor, internal hydriding of Zircaloy cladding was a persistent cause of gross cladding failures during the 1960s. It occurred in the fuel rods of water-cooled nuclear power reactors that had a small cladding defect. This report summarizes the experimental findings, causes, mechanisms, and methods of minimizing internal hydriding in defected Zircaloy-clad fuel rods. Irradiation test data on the different types of defected fuel rods, intentionally fabricated defected and in-pile operationally defected rods, are compared. Significant factors affecting internal hydriding in defected Zircaloy-clad fuel rods (defect hole size, internal and external sources of hydrogen, Zircaloy cladding surface properties, nickel alloy contamination of Zircaloy, the effect of heat flux and fluence) are discussed. Pertinent in-pile and out-of-pile test results from Bettis and other laboratories are used as a data base in constructing a qualitative model which explains hydrogen generation and distribution in Zircaloy cladding of defected water-cooled reactor fuel rods. Techniques for minimizing internal hydride failures in Zircaloy-clad fuel rods are evaluated

Food package irradiator-a landmark of operational safety and food irradiation research

International Nuclear Information System (INIS)

Jain, M.P.; Sanyal, Bhaskar; Ghosh, Sunil K.

2017-01-01

Food irradiation in India has been undertaken for preservation of food for safe consumption, security of food for round the year and export of the food commodities to earn foreign exchange. Therefore, an irradiation plant known as Food Package Irradiator (FPI) was set-up in the year 1967 in BARC. This plant utilizes gamma radiation from "6"0Co source that has a maximum allowable activity of 100 kCi. It is a multipurpose facility where a wide range of products like onion for sprout inhibition to spices for microbial decontamination can be carried out. In short, the design of irradiator has been considered based on obtaining variable throughputs and variable dose rates

Nuclear data needs for neutron spectrum tailoring at International Fusion Materials Irradiation Facility (IFMIF)

International Nuclear Information System (INIS)

Sugimoto, Masayoshi

2001-01-01

International Fusion Materials Irradiation Facility (IFMIF) is a proposal of D-Li intense neutron source to cover all aspects of the fusion materials development in the framework of IEA collaboration. The new activity has been started to qualifying the important technical issues called Key Element technology Phase since 2000. Although the neutron spectrum can be adjusted by changing the incident beam energy, it is favorable to be carried out many irradiation tasks at the same time under the unique beam condition. For designing the tailored neutron spectrum, neutron nuclear data for the moderator-reflector materials up to 50 MeV are required. The data for estimating the induced radioactivity is also required to keep the radiation level low enough at maintenance time. The candidate materials and the required accuracy of nuclear data are summarized. (author)

Nuclear data needs for neutron spectrum tailoring at International Fusion Materials Irradiation Facility (IFMIF)

Energy Technology Data Exchange (ETDEWEB)

Sugimoto, Masayoshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

2001-03-01

International Fusion Materials Irradiation Facility (IFMIF) is a proposal of D-Li intense neutron source to cover all aspects of the fusion materials development in the framework of IEA collaboration. The new activity has been started to qualifying the important technical issues called Key Element technology Phase since 2000. Although the neutron spectrum can be adjusted by changing the incident beam energy, it is favorable to be carried out many irradiation tasks at the same time under the unique beam condition. For designing the tailored neutron spectrum, neutron nuclear data for the moderator-reflector materials up to 50 MeV are required. The data for estimating the induced radioactivity is also required to keep the radiation level low enough at maintenance time. The candidate materials and the required accuracy of nuclear data are summarized. (author)

Fabrication of irradiation capsule for IASCC irradiation tests (2). Irradiation capsule for crack propagation test (Joint research)

International Nuclear Information System (INIS)

Ide, Hiroshi; Matsui, Yoshinori; Kawamata, Kazuo; Taguchi, Taketoshi; Kanazawa, Yoshiharu; Onuma, Yuichi; Watanabe, Hiroyuki; Inoue, Shuichi; Izumo, Hironobu; Ishida, Takuya; Saito, Takashi; Ishitsuka, Etsuo; Kawamura, Hiroshi; Kaji, Yoshiyuki; Ugachi, Hirokazu; Tsukada, Takashi

2008-03-01

It is known that irradiation Assisted Stress Corrosion Cracking (IASCC) occurs when austenitic stainless steel components used for light water reactor (LWR) are irradiated for a long period. In order to evaluate the high aging of the nuclear power plant, the study of IASCC becomes the important problem. The specimens irradiated in the reactor were evaluated by post irradiation examination in the past study. For the appropriate evaluation of IASCC, it is necessary to test it under the simulated LWR conditions; temperature, water chemistry and irradiation conditions. In order to perform in-pile SCC test, saturated temperature capsule (SATCAP) was developed. There are crack growth test, crack propagation test and so on for in-pile SCC test. In this report, SATCAP for crack propagation test is reported. (author)

Fabrication of irradiation capsule for IASCC irradiation tests (1). Irradiation capsule for crack growth test (Joint research)

International Nuclear Information System (INIS)

Ide, Hiroshi; Matsui, Yoshinori; Kawamata, Kazuo; Taguchi, Taketoshi; Kanazawa, Yoshiharu; Onuma, Yuichi; Watanabe, Hiroyuki; Inoue, Shuichi; Izumo, Hironobu; Ishida, Takuya; Saito, Takashi; Ishitsuka, Etsuo; Kawamura, Hiroshi; Kaji, Yoshiyuki; Ugachi, Hirokazu; Tsukada, Takashi

2008-03-01

It is known that Irradiation Assisted Stress Corrosion Cracking (IASCC) occurs when austenitic stainless steel components used for light water reactor (LWR) are irradiated for a long period. In order to evaluate the high aging of the nuclear power plant, the study of IASCC becomes the important problem. The specimens irradiated in the reactor were evaluated by post irradiation examination in the past study. For the appropriate evaluation of IASCC, it is necessary to test it under the simulated LWR conditions; temperature, water chemistry and irradiation conditions. In order to perform in-pile SCC test, saturated temperature capsule (SATCAP) was developed. There are crack growth test, crack propagation test and so on for in-pile SCC test. In this report, SATCAP for crack growth test is reported. (author)

Development of lithium target system in engineering validation and engineering design activity of the international fusion materials irradiation facility (IFMIF/EVEDA)

International Nuclear Information System (INIS)

Wakai, Eiichi; Kondo, Hiroo; Sugimoto, Masayoshi; Ida, Mizuho; Kanemura, Takuji; Watanabe, Kazuyoshi; Fujishiro, Kouji; Edao, Yuuki; Niitsuma, Shigeto; Kimura, Haruyuki; Fukada, Satoshi; Hiromoto, Tetsushi; Shigeharu, Satoshi; Yagi, Jyuro; Furukawa, Tomohiro; Hirakawa, Yasushi; Suzuki, Akihiro; Terai, Takayuki; Horiike, Hiroshi; Hoashi, Eiji; Suzuki, Sachiko; Yamaoka, Nobuo; Serizawa, Hisashi; Kawahito, Yosuke; Tsuji, Yoshiyuki; Furuya, Kazuyuki; Takeo, Fumio

2012-01-01

Engineering validation and engineering design activity (EVEDA) for the international fusion materials irradiation facility (IFMIF) has been conducted since 2007. Research and development of the Lithium target facility is an important part of this activity. We constructed a world largest liquid Lithium test loop with a capacity of 5000 L in 2010 and successfully completed the first stage validation tests (functional tests of components and Lithium flow test (flow velocity 15 m/s at the target). In the present article, recent results of the EVEDA activity for the Lithium target facility and related technologies on liquid Lithium are reviewed. (author)

The wholesomeness of irradiated foodstuffs

International Nuclear Information System (INIS)

Elias, P.S.

1992-01-01

The evaluation of the wholesomeness of irradiated foodstuffs is based on a large body of scientific data mainly from four areas: the radiochemical effects of ionising radiation, the toxicity of irradiated foodstuffs, the microbiological effects and the nutritional aspects. The technology of processing food with ionising radiation with the objectives of decontamination, disinfestation and of extended shelf life has been investigated in many countries for more than fourty years. The wholesomeness of irradiated food has been examined over the same period through intensive research into the radiochemical, toxicological, microbiological and nutritional changes resulting from this processing technology. The ultimate result was the decision of the international Joint FAO/IAEA/WHO Expert Committee, published in 1981, to regard in general the irradiation of food in the dose range up to 10 kGy as an acceptable processing technology and to consider foodstuffs so treated as wholesome. A large number of national authorities came to similar conclusions following their own evaluation of the available data. The most important scientific results, the general restrictions on the use of food irradiation, and existing prejudices will be dealt with. (orig.) [de

Design of boron carbide-shielded irradiation channel of the outer irradiation channel of the Ghana Research Reactor-1 using MCNP.

Science.gov (United States)

Abrefah, R G; Sogbadji, R B M; Ampomah-Amoako, E; Birikorang, S A; Odoi, H C; Nyarko, B J B

2011-01-01

The MCNP model for the Ghana Research Reactor-1 was redesigned to incorporate a boron carbide-shielded irradiation channel in one of the outer irradiation channels. Extensive investigations were made before arriving at the final design of only one boron carbide covered outer irradiation channel; as all the other designs that were considered did not give desirable results of neutronic performance. The concept of redesigning a new MCNP model, which has a boron carbide-shielded channel is to equip the Ghana Research Reactor-1 with the means of performing efficient epithermal neutron activation analysis. After the simulation, a comparison of the results from the original MCNP model for the Ghana Research Reactor-1 and the new redesigned model of the boron carbide shielded channel was made. The final effective criticality of the original MCNP model for the GHARR-1 was recorded as 1.00402 while that of the new boron carbide designed model was recorded as 1.00282. Also, a final prompt neutron lifetime of 1.5245 × 10(-4)s was recorded for the new boron carbide designed model while a value of 1.5571 × 10(-7)s was recorded for the original MCNP design of the GHARR-1. Copyright © 2010 Elsevier Ltd. All rights reserved.

International fusion research council

International Nuclear Information System (INIS)

Belozerov, A.N.

1977-01-01

A brief history of the International Fusion Research Council (IFRC) is given and the minutes of the 1976 meeting in Garching are summarized. At the Garching meeting, the IFRC evaluated the quality of papers presented at recent IAEA conferences on plasma physics and controlled thermonuclear research, and made recommendations on the organization and timing of future meetings on nuclear fusion

Radiological safety research of food irradiation with 7.5 MeV X-rays

International Nuclear Information System (INIS)

Yang Bin; Tang Weidong; Zhang Yue; Xu Tao; Jin Jianqiao; Ye Mingyang

2012-01-01

China and America both have 7.5 MeV high energy X-ray accelerator. The radiological safety of food irradiated with 7.5 MeV X-rays (bremsstrahlung) has been investigated. Samples of meat and meat ash were located in a large volume of fresh meat at the position of the highest photoneutron fluence and irradiated to an X-ray dose of 15 kGy, twice the maximum dose allowed by the US FDA for meat irradiation. An evaluation of the corresponding radiation exposure from ingestion of the irradiated product has been compared to natural background radiation. The paper concludes that the risk to individuals from intake of food irradiated with X-rays from 7.5 MeV electrons, even with a broad energy spectrum, would be trivial. The common target materials are Au, Ta and W. The U.S, requires only Au and Ta can be used as food irradiation target materials and China has not yet relevant provisions. The first 7.5 MeV accelerator for food irradiation in China is under built, and will do the explore research for the choice of target material. (authors)

Dose Distribution of Gamma Irradiators

International Nuclear Information System (INIS)

Park, Seung Woo; Shin, Sang Hun; Son, Ki Hong; Lee, Chang Yeol; Kim, Kum Bae; Jung, Hai Jo; Ji, Young Hoon

2010-01-01

Gamma irradiator using Cs-137 have been widely utilized to the irradiation of cell, blood, and animal, and the dose measurement and education. The Gamma cell 3000 Elan (Nordion International, Kanata, Ontario, Canada) irradiator was installed in 2003 with Cs-137 and dose rate of 3.2 Gy/min. And the BioBeam 8000 (Gamma-Service Medical GmbH, Leipzig, Germany) irradiator was installed in 2008 with Cs-137 and dose rate of 3.5 Gy/min. Our purpose was to evaluate the practical dosimetric problems associated with inhomogeneous dose distribution within the irradiated volume in open air state using glass dosimeter and Gafchromic EBT film dosimeter for routine Gamma irradiator dosimetry applications at the KIRAMS and the measurements were compared with each other. In addition, an user guideline for useful utilization of the device based on practical dosimetry will be prepared. The measurement results of uniformity of delivered dose within the device showed variation more than 14% between middle point and the lowest position at central axis. Therefore, to maintain dose variation within 10%, the criteria of useful dose distribution, for research radiation effects, the irradiated specimen located at central axis of the container should be placed within 30 mm from top and bottom surface, respectively. In addition, for measurements using the film, the variations of dose distribution were more then 50% for the case of less than 10 second irradiation, mostly within 20% for the case of more than 20 second irradiation, respectively. Therefore, the irradiation experiments using the BioBeam 8000 irradiator are recommended to be used for specimen required at least more than 20 second irradiation time.

Irradiation test plan of oxidation-resistant graphite in WWR-K Research Reactor

International Nuclear Information System (INIS)

Sumita, Junya; Shibata, Taiju; Sakaba, Nariaki; Osaki, Hirotaka; Kato, Hideki; Fujitsuka, Kunihiro; Muto, Takenori; Gizatulin, Shamil; Shaimerdenov, Asset; Dyussambayev, Daulet; Chakrov, Petr

2014-01-01

Graphite materials are used for the in-core components of High Temperature Gas-cooled Reactor (HTGR) which is a graphite-moderated and helium gas-cooled reactor. In the case of air ingress accident in HTGR, SiO_2 protective layer is formed on the surface of SiC layer in TRISO CFP and oxidation of SiC does not proceed and fission products are retained inside the fuel particle. A new safety concept for the HTGR, called Naturally Safe HTGR, has been recently proposed. To enhance the safety of Naturally Safe HTGR ultimately, it is expected that oxidation-resistant graphite is used for graphite components to prevent the TRISO CFPs and fuel compacts from failure. SiC coating is one of candidate methods for oxidation-resistant graphite. JAEA and four graphite companies launched R&Ds to develop the oxidation-resistant graphite and the International Science and Technology Center (ISTC) partner project with JAEA and INP was launched to investigate the irradiation effects on the oxidation-resistant graphite. To determine grades of the oxidation-resistant graphite which will be adopted as irradiation test, a preliminary oxidation test was carried out. This paper described the results of the preliminary oxidation test, the plan of out-of-pile test, irradiation test and post-irradiation test (PIE) of the oxidation-resistant graphite. The results of the preliminary oxidation test showed that the integrity of the oxidation resistant graphite was confirmed and that all of grades used in the preliminary test can be adopted as the irradiation test. Target irradiation temperature was determined to be 1473 (K) and neutron fluence was determined to be from 0.54 × 10"2"5through 1.4 × 10"2"5 (/m"2, E>0.18MeV). Weight change, oxidation rate, activation energy, surface condition, etc. will be evaluated in out-of-pile test and weight change, irradiation effect on oxidation rate and activation energy, surface condition, etc. will be evaluated in PIE. (author)

Simulation of gamma-ray irradiation of lettuce leaves in a 137Cs irradiator using MCNP

International Nuclear Information System (INIS)

Kim, Jongsoon; Moreira, Rosana G.; Braby, Leslie A.

2010-01-01

Ionizing radiation effectively reduces the number of common microbial pathogens in fresh produce. However, the efficacy of the process for pathogens internalized into produce tissue is unknown. The objective of this study was to understand gamma irradiation of lettuce leaf structure exposed in a 137 Cs irradiator using MCNP. The simulated 137 Cs irradiator is a self-shielded device, and its geometry and sources are described in the MCNP input file. When the irradiation chamber is filled with water, lower doses are found at the center of the irradiation volume and the dose uniformity ratio (maximum dose/minimum dose) is 1.76. For randomly oriented rectangular lettuce leaf segments in the irradiation chamber, the dose uniformity ratio is 1.25. It shows that dose uniformity in the Cs irradiator is strongly dependent of the density of the sample. To understand dose distribution inside the leaf, we divided a lettuce leaf into a low density (flat) region (0.72 g/cm 3 ) and high density (rib) region (0.86 g/cm 3 ). Calculated doses to the rib are 61% higher than doses to the flat region of the leaf. This indicates that internalized microorganisms can be inactivated more easily than organisms on the surface. This study shows that irradiation can effectively reduce viable microorganism internalized in lettuce. (author)

Results from the CDE phase activity on neutron dosimetry for the international fusion materials irradiation facility test cell

CERN Document Server

Esposito, B; Maruccia, G; Petrizzi, L; Bignon, G; Blandin, C; Chauffriat, S; Lebrun, A; Recroix, H; Trapp, J P; Kaschuck, Y

2000-01-01

The international fusion materials irradiation facility (IFMIF) project deals with the study of an accelerator-based, deuterium-lithium source, producing high energy neutrons at sufficient intensity and irradiation volume to test samples of candidate materials for fusion energy reactors. IFMIF would also provide calibration and validation of data from fission reactor and other accelerator based irradiation tests. This paper describes the activity on neutron/gamma dosimetry (necessary for the characterization of the specimens' irradiation) performed in the frame of the IFMIF conceptual design evaluation (CDE) neutronics tasks. During the previous phase (conceptual design activity (CDA)) the multifoil activation method was proposed for the measurement of the neutron fluence and spectrum and a set of suitable foils was defined. The cross section variances and covariances of this set of foils have now been used for tests on the sensitivity of the IFMIF neutron spectrum determination to cross section uncertainties...

International research networks in pharmaceuticals

DEFF Research Database (Denmark)

Cantner, Uwe; Rake, Bastian

2014-01-01

of scientific publications related to pharmaceutical research and applying social network analysis, we find that both the number of countries and their connectivity increase in almost all disease group specific networks. The cores of the networks consist of high income OECD countries and remain rather stable......Knowledge production and scientific research have become increasingly more collaborative and international, particularly in pharmaceuticals. We analyze this tendency in general and tie formation in international research networks on the country level in particular. Based on a unique dataset...... over time. Using network regression techniques to analyze the network dynamics our results indicate that accumulative advantages based on connectedness and multi-connectivity are positively related to changes in the countries' collaboration intensity whereas various indicators on similarity between...

Saturation behavior of irradiation hardening in F82H irradiated in the HFIR

Energy Technology Data Exchange (ETDEWEB)

Hirose, T. [Blanket Engineering Group, Japan Atomic Energy Agency, Naka, Ibaraki (Japan); Shiba, K.; Tanigawa, H.; Ando, M. [Japan Atomic Energy Agency, Tokai-mura, Naga-gun, Ibaraki-ken (Japan); Klueh, R.L. [Oak Ridge National Laboratory, TN (United States); Stoller, R. [ORNL - Oak Ridge National Laboratory, Materials Science and Technology Div., Oak Ridge, AK TN (United States)

2007-07-01

Full text of publication follows: Post irradiation tensile tests on reduced activation ferritic/martensitic steel, F82H have been conducted over the past two decades using Japan Materials Testing Reactor (JMTR) of JAEA, and Fast Flux Testing Facility (FFTF) of PNNL and High Flux Isotope Reactor (HFIR) of ORNL, USA, under Japan/US collaboration programs. According to these results, F82H does not demonstrate irradiation hardening above 673 K up to 60 dpa. The current study has been concentrated on hardening behavior at temperature around 573 K. A series of low temperature irradiation experiment has been conducted at the HFIR under the international collaborative research between JAEA/US-DOE. In this collaboration, the irradiation condition is precisely controlled by the well matured capsule designing and instrumentation. This paper summarizes recent results of the irradiation experiments focused on F82H and its modified steels compared with the irradiation properties database on F82H. Post irradiation tensile tests have been conducted on the F82H and its modified steels irradiated at 573 K and the dose level was up to 25 dpa. According to these results, irradiation hardening of F82H is saturated by 9 dpa and the as-irradiated 0.2 % proof stress is less than 1 GPa at ambient temperature. The deterioration of total elongation was also saturated by 9 dpa irradiation. The ductility of some modified steels which showed larger total elongation than that of F82H before irradiation become the same level as that of standard F82H steel after irradiation, even though its magnitude of irradiation hardening is smaller than that of F82H. This suggests that the more ductile steel demonstrates the more ductility loss at this temperature, regardless to the hardening level. The difference in ductility loss behavior between various tensile specimens will be discussed as the ductility could depend on the specimen dimension. (authors)

Review on applied foods and analyzed methods in identification testing of irradiated foods

International Nuclear Information System (INIS)

Kim, Kwang Hoon; Lee, Hoo Chul; Park, Sung Hyun; Kim, Soo Jin; Kim, Kwan Soo; Jeong, Il Yun; Lee, Ju Woon; Yook, Hong Sun

2010-01-01

Identification methods of irradiated foods have been adopted as official test by EU and Codex. PSL, TL, ESR and GC/MS methods were registered in Korea food code on 2009 and put in force as control system of verification for labelling of food irradiation. But most generally applicable PSL and TL methods are specified applicable foods according to domestic approved items. Unlike these specifications, foods unpermitted in Korea are included in applicable items of ESR and GC/MS methods. According to recent research data, numerous food groups are possible to effective legal control by identification and these items are demanded to permit regulations for irradiation additionally. Especially, the prohibition of irradiation for meats or seafoods is not harmonized with international standards and interacts as trade friction or industrial restrictions due to unprepared domestic regulation. Hence, extension of domestic legal permission for food irradiation can contrive to related industrial development and also can reduce trade friction and enhance international competitiveness

Food irradiation makes progress

International Nuclear Information System (INIS)

Kooij, J. van

1984-01-01

In the past fifteen years, food irradiation processing policies and programmes have been developed both by a number of individual countries, and through projects supported by FAO, IAEA and WHO. These aim at achieving general acceptance and practical implementation of food irradiation through rigorous investigations of its wholesomeness, technological and economic feasibility, and efforts to achieve the unimpeded movement of irradiated foods in international trade. Food irradiation processing has many uses

The International Research Experience: Executive MBA Distinctiveness.

Science.gov (United States)

Ambrose, David M.; Pol, Louis G.

1995-01-01

The University of Nebraska's Executive Master's in Business Administration (MBA) program has integrated international research activities into the curriculum. The university contracted with domestic corporations to conduct studies on prospects for international business. Research assignments include assessment of competitors, economic evaluations,…

IGORR 1: Proceedings of the 1. meeting of the International Group On Research Reactors

Energy Technology Data Exchange (ETDEWEB)

West, C D [comp.

1990-05-01

Descriptions of the ongoing projects presented at this Meeting were concerned with: New Research Reactor FRM-II at Munich; MITR-II reactor; The Advanced. Neutron Source (ANS) Project; The high Flux Reactor Petten, Status and Prospects; The High Flux Beam Reactor Instrumentation Upgrade; BER-II Upgrade; The BR2 Materials Testing Reactor Past, Ongoing and Under-Study Upgrades; The ORPHEE, Reactor Current Status and Proposed Enhancement of Experimental Variabilities; Construction of the Upgraded JRR-3; Status of the University of Missouri-Columbia Research Reactor Upgrade; the Reactor and Cold Neutron Facility at NIST; Upgrade of Materials Irradiation Facilities in HFIR; Backfitting of the FRG Reactors; University Research Reactors in the United States; and Organization of the ITER Project - Sharing of Informational Procurements. Topics of interest were: Thermal-hydraulic tests and correlations, Corrosion tests and analytical models , Multidimensional kinetic analysis for small cores, Fuel plates fabrication, Fuel plates stability, Fuel irradiation, Burnable poison irradiation, Structural materials irradiation, Neutron guides irradiation, Cold Source materials irradiation, Cold Source LN{sub 2} test, Source LH2-H{sub 2}O reaction (H or D), Instrumentation upgrading and digital control system, Man-machine interface.

IGORR 1: Proceedings of the 1. meeting of the International Group On Research Reactors

International Nuclear Information System (INIS)

West, C.D.

1990-05-01

Descriptions of the ongoing projects presented at this Meeting were concerned with: New Research Reactor FRM-II at Munich; MITR-II reactor; The Advanced. Neutron Source (ANS) Project; The high Flux Reactor Petten, Status and Prospects; The High Flux Beam Reactor Instrumentation Upgrade; BER-II Upgrade; The BR2 Materials Testing Reactor Past, Ongoing and Under-Study Upgrades; The ORPHEE, Reactor Current Status and Proposed Enhancement of Experimental Variabilities; Construction of the Upgraded JRR-3; Status of the University of Missouri-Columbia Research Reactor Upgrade; the Reactor and Cold Neutron Facility at NIST; Upgrade of Materials Irradiation Facilities in HFIR; Backfitting of the FRG Reactors; University Research Reactors in the United States; and Organization of the ITER Project - Sharing of Informational Procurements. Topics of interest were: Thermal-hydraulic tests and correlations, Corrosion tests and analytical models , Multidimensional kinetic analysis for small cores, Fuel plates fabrication, Fuel plates stability, Fuel irradiation, Burnable poison irradiation, Structural materials irradiation, Neutron guides irradiation, Cold Source materials irradiation, Cold Source LN 2 test, Source LH2-H 2 O reaction (H or D), Instrumentation upgrading and digital control system, Man-machine interface

Ten-Year Survival Results of a Randomized Trial of Irradiation of Internal Mammary Nodes After Mastectomy

International Nuclear Information System (INIS)

Hennequin, Christophe; Bossard, Nadine; Servagi-Vernat, Stéphanie; Maingon, Philippe; Dubois, Jean-Bernard; Datchary, Jean; Carrie, Christian; Roullet, Bernard; Suchaud, Jean-Philippe; Teissier, Eric; Lucardi, Audrey; Gerard, Jean-Pierre; Belot, Aurélien

2013-01-01

Purpose: To evaluate the efficacy of irradiation of internal mammary nodes (IMN) on 10-year overall survival in breast cancer patients after mastectomy. Methods and Patients: This multicenter phase 3 study enrolled patients with positive axillary nodes (pN+) or central/medial tumors with or without pN+. Other inclusion criteria were age <75 and a Karnofsky index ≥70. All patients received postoperative irradiation of the chest wall and supraclavicular nodes and were randomly assigned to receive IMN irradiation or not. Randomization was stratified by tumor location (medial/central or lateral), axillary lymph node status, and adjuvant therapy (chemotherapy vs no chemotherapy). The prescribed dose of irradiation to the target volumes was 50 Gy or equivalent. The first 5 intercostal spaces were included in the IMN target volume, and two-thirds of the dose (31.5 Gy) was given by electrons. The primary outcome was overall survival at 10 years. Disease-free survival and toxicity were secondary outcomes. Results: T total of 1334 patients were analyzed after a median follow-up of 11.3 years among the survivors. No benefit of IMN irradiation on the overall survival could be demonstrated: the 10-year overall survival was 59.3% in the IMN-nonirradiated group versus 62.6% in the IMN-irradiated group (P=.8). According to stratification factors, we defined 6 subgroups (medial/central or lateral tumor, pN0 [only for medial/central] or pN+, and chemotherapy or not). In all these subgroups, IMN irradiation did not significantly improve overall survival. Conclusions: In patients treated with 2-dimensional techniques, we failed to demonstrate a survival benefit for IMN irradiation. This study cannot rule out a moderate benefit, especially with more modern, conformal techniques applied to a higher risk population

International Journal of Health Research

African Journals Online (AJOL)

Erah

It seeks particularly (but not exclusively) to encourage multidisciplinary research and collaboration ... Submission of Manuscript: The International Journal of Health Research uses a journal management software to allow authors ... access to medicine, infrastructural decay, quality of health professional, poor adherence to ...

International Journal of Basic, Applied and Innovative Research

African Journals Online (AJOL)

International Journal of Basic, Applied and Innovative Research (IJBAIR) [ISSN: 2315-5388; E-ISSN: 2384 - 681X] is a peer reviewed Journal Publication of Anthonio Research Center and the International Society of Science Researchers (ISSCIR). IJBAIR accepts research articles, review articles, short reports, and ...

Research and design of the moving system for the cobalt-60 industrial irradiator

International Nuclear Information System (INIS)

Le Minh Tuan; Tran Khac An; Cao Van Chung; Phan Phuoc Thang

2016-01-01

On the way of localization of Cobalt-60 industrial irradiators, Research and Development Center for Radiation Technology (VINAGAMMA) has successfully designed and manufactured the first version of Co-60 industrial irradiator, VINAGA1. The second version of Co-60 industrial irradiator has been studied and designed by VINAGAMMA in the frame of the scientific project No. DTCB.02/15/TTNCTK. The nucleus of a Co-60 industrial irradiator is a mechanical system inside an irradiation room namely a tote box moving system. This report presents the tote box moving system designed by VINAGAMMA. The tote box moving system contains 52 tote boxes with the dimensions of 50 cm (w) × 70 cm (l) × 150 cm (h) that are moving around the source racks in the manner of 4 passes and 2 levels. The irradiator with this tote box moving system has good specifications: The minimum time of an irradiation cycle is 1h 20 min and the dose uniformity ratio (DUR) at the product densities of 0.1 g/cm 3 and 0.5 g/cm 3 is 1.4 and 1.8, respectively. Radiation energy utilization efficiency at the product densities of 0.1 g/cm 3 and 0.5 g/cm 3 is 19.7% and 48.8%, respectively. These specifications meet the requirements for a multi-purpose Co-60 industrial irradiator and the present irradiation requirements in Vietnam. (author)

Proceedings of 2008 KAERI/JAEA joint seminar on advanced irradiation and PIE technologies

International Nuclear Information System (INIS)

Ryu, Woo-Seog; Ishihara, Masahiro

2008-12-01

Under the Arrangement for Cooperation in the field of peaceful uses of Nuclear Energy between the Korea Atomic Energy Research Institute (KAERI) and the Japan Atomic Energy Agency (JAEA), the 2008 KAERI-JAEA Joint Seminar on Advanced Irradiation and PIE (post-irradiation examination) Technologies has been held at KAERI in Daejeon, Korea, from November 5 to 7, 2008. This seminar was organized by the PIE and Radwaste Division, Research Reactor Engineering Division, and HANARO Management Division in KAERI. It was also the first time to hold the seminar under the agreement signed September 4, 2008. This triennial seminar is the sixth in series of bilateral exchange of irradiation technologies. Since the first joint seminar on Post Irradiation Examination Technology between JAERI and KAERI held at JAERI Oarai center, Japan in 1992, it has been a good model of international cooperation program between KAERI and JAEA in the field of neutron irradiation uses. At the fifth seminar in 2005, irradiation technology field was included to the joint seminar, moreover in this time it is expanded to the research reactor management field for covering whole areas of irradiation using in research reactors. The seminar was divided into three technical sessions; the sessions addressed the general topics of 'research reactor management', 'advanced irradiation technology' and 'post-irradiation examination technology'. Total 46 presentations were made, and active information exchange was done among participants. This proceeding is containing the papers or manuscripts presented in the 2008 KAERI-JAEA Joint Seminar on Advanced Irradiation and PIE Technologies. The 46 of the presented papers indexed individually. (J.P.N.)

Spanish Nuclear Safety Research under International Frameworks

Energy Technology Data Exchange (ETDEWEB)

Herranz, L. E.; Reventos, F.; Ahnert, C.; Jimenez, G.; Queral, C.; Verdu, G.; Miro, R.; Gallardo, S.

2013-10-01

The Nuclear Safety research requires a wide international collaboration of several involved groups. In this sense this paper pretends to show several examples of the Nuclear Safety research under international frameworks that is being performed in different Universities and Research Institutions like CIEMAT, Universitat Politecnica de Catalunya (UPC), Universidad Politecnica de Madrid (UPM) and Universitat Politenica de Valencia (UPV). (Author)

Gamma radiation influence on internal quality factors of eggs

International Nuclear Information System (INIS)

Pombo, Carolina R.; Mano, Sergio B.

2005-01-01

Poultry egg is a fundamental item in the human diet due to its high nutritional value. Its treatment by irradiation in order to eliminate pathogenic bacteria has been authorized in the USA in 2000 limited to a dose of 3 kGy in contrast to the requirements of the Brazilian legislation that does not establish quantitative dose limits. However research on the sensory properties of irradiated eggs is still scarce in the literature. In this work, possible changes in the internal quality factors of eggs were investigated. The samples were irradiated with doses of 0, 0.5, 1.0, 1.5, 2.0 and 2.5 kGy at an average dose rate of 1.7 kGy/h in the research Cesium-137 irradiation facility at the Technological Center of the Army (CTEx) situated in Guaratiba, Rio de Janeiro (RJ). A total of 300 eggs sorted in 6 lots, one for each dose, were kept at room temperature being periodically inspected up to 20 days. The samples were analyzed for the following indicators of the internal quality of the eggs: Haugh unity, air chamber, yolk index, pH of the white and pH of the yolk. The results indicated that irradiation damages the structure of the white of the eggs reducing its consistency in addition to changing other parameters related to their internal quality. Therefore, it has been concluded that irradiation is not appropriate for the treatment of whole eggs in the conditions studied in this work. (author)

Food irradiation methodology : prospect and retrospect

International Nuclear Information System (INIS)

Nadkarni, G.B.

1987-01-01

Research and development work in food irradiation over the past several years has been essentially directed towads answering all possible questions in respect of the suitability of the process, quality of materials and safety for human use. A major effort was indeed, around the toxicological evaluation, till it was recognised internationally that irradiated items of food do not present any health hazards. This recognition along with the awareness of the hazards in the use of chemicals has resulted in a renewed interest in the use of radiations for preservation of food. Radiation preservation of food would reach the stage of practical application with additional information on design and functional aspects of radiation sources, appropriate for specific commodities. Each items has a particular dose requirement depending on the purpose of irradiation and the type of handling. 21 refs. (author)

IFMIF (International Fusion Materials Irradiation Facility) key element technology phase interim report

International Nuclear Information System (INIS)

Nakamura, Hiroo; Ida, Mizuho; Sugimoto, Masayoshi; Takeuchi, Hiroshi; Yutani, Toshiaki

2002-03-01

Activities of International Fusion Materials Irradiation Facility (IFMIF) have been performed under an IEA collaboration since 1995. IFMIF is an accelerator-based deuteron (D + )-lithium (Li) neutron source designed to produce an intense neutron field (2 MW/m 2 , 20 dpa/year for Fe) in a volume of 500 cm 3 for testing candidate fusion materials. In 2000, a 3 year Key Element technology Phase (KEP) of IFMIF was started to reduce the key technology risk factors. This interim report summarizes the KEP activities until mid 2001 in the major project work-breakdown areas of accelerator, target, test facilities and design integration. (author)

Status and possible prospects of an international fusion materials irradiation facility

International Nuclear Information System (INIS)

Cozzani, F.

1999-01-01

Structural materials for future DT fusion power reactors will have to operate under intense neutron fields with energies up to 14 MeV and fluences in the order of 2 MW/m 2 per year. As environmental acceptability, safety considerations and economic viability will be ultimately the keys to the widespread introduction of fusion power, the development of radiation-resistant and low activation materials would contribute significantly to fusion development. For this purpose, testing of materials under irradiation conditions close to those expected in a fusion power station would require the availability, in an appropriate time framework, of an intense, high-energy neutron source. Recent advances in linear accelerator technology, in small specimens testing technology, and in the comprehension of damage phenomena, lead to the conclusion that an accelerator-based D-Li neutron source, with beam energy variability, would provide the most realistic option for a fusion materials testing facility. Under the auspices of the IEA, an international effort (EU, Japan, US, RF) to carry out the conceptual design activities (CDA) of an international fusion materials irradiation facility (IFMIF), based on the D-Li concept, have been carried out successfully. A final conceptual design report was produced at the end of 1996. A phase of conceptual design evaluation (CDE), presently underway, is extending and further refining some of the conceptual design details of IFMIF. The results indicate that an IFMIF-class installation would be technically feasible and could meet its mission objectives. However, a suitable phase of Engineering Validation, to carry out some complementary R and D and prototyping, would still be needed to resolve a few key technical uncertainties before the possibility to proceed toward detailed design and construction could be explored. (orig.)

Mapping Global Research on International Higher Education

Science.gov (United States)

Kuzhabekova, Aliya; Hendel, Darwin D.; Chapman, David W.

2015-01-01

The purpose of the study is to map global research in international higher education. Specifically, the study uses bibliometric and social network analysis methods to identify key individuals, institutions, countries, and disciplines contributing to research in international higher education and to investigate patterns of connectivity among…

The International Context of Educational Research.

Science.gov (United States)

Husen, Torsten

1983-01-01

Comparative educational research and cross-national studies are described. The author suggests that such internationalism should not be the intent of university research. Rather, research universities should try to confine themselves to studying fundamental educational problems. (KC)

Health literacy: setting an international collaborative research agenda

Directory of Open Access Journals (Sweden)

Rowlands Gillian

2009-07-01

Full Text Available Abstract Background Health literacy is an increasingly important topic in both the policy and research agendas of many countries. During the recent 36th Annual Meeting of the North American Primary Care Research Group, the authors led an audio-taped 3-hour forum, "Studying Health Literacy: Developing an International Collaboration," where the current state of health literacy (HL in the United States (US and United Kingdom (UK was presented and attendees were encouraged to debate a future research agenda. Discussion of Forum Themes The debate centred around three distinct themes, including: (1 refining HL definitions and conceptual models, (2 HL measurement and assessment tools, and (3 developing a collaborative international research agenda. The attendees agreed that future research should be theoretically grounded and conceptual models employed in studies should be explicit to allow for international comparisons to be drawn. Summary and Authors Reflections The importance of HL research and its possible contribution to health disparities is becoming increasingly recognised internationally. International collaborations and comparative studies could illuminate some of the possible determinants of disparities, and also possibly provide a vehicle to examine other research questions of interest.

Internal stress distribution for generating closure domains in laser-irradiated Fe–3%Si(110) steels

International Nuclear Information System (INIS)

Iwata, Keiji; Imafuku, Muneyuki; Orihara, Hideto; Sakai, Yusuke; Ohya, Shin-Ichi; Suzuki, Tamaki; Shobu, Takahisa; Akita, Koichi; Ishiyama, Kazushi

2015-01-01

Internal stress distribution for generating closure domains occurring in laser-irradiated Fe–3%Si(110) steels was investigated using high-energy X-ray analysis and domain theory based on the variational principle. The measured triaxial stresses inside the specimen were compressive and the stress in the rolling direction became more dominant than stresses in the other directions. The calculations based on the variational principle of magnetic energy for closure domains showed that the measured triaxial stresses made the closure domains more stable than the basic domain without closure domains. The experimental and calculation results reveal that the laser-introduced internal stresses result in the occurrence of the closure domains

International energy: Research organizations, 1986--1990

Energy Technology Data Exchange (ETDEWEB)

Hendricks, P.; Jordan, S. (eds.) (USDOE Office of Scientific and Technical Information, Oak Ridge, TN (USA))

1991-03-01

The International Energy: Research Organizations publication contains the standardized names of energy research organizations used in energy information databases. Involved in this cooperative task are (1) the technical staff of the USDOE Office of Scientific and Technical Information (OSTI) in cooperation with the member countries of the Energy Technology Data Exchange (ETDE) and (2) the International Nuclear Information System (INIS). This publication identifies current organizations doing research in all energy fields, standardizes the format for recording these organization names in bibliographic citations, assigns a numeric code to facilitate data entry, and identifies report number prefixes assigned by these organizations. These research organization names may be used in searching the databases Energy Science Technology'' on DIALOG and Energy'' on STN International. These organization names are also used in USDOE databases on the Integrated Technical Information System. Research organizations active in the past five years, as indicated by database records, were identified to form this publication. This directory includes approximately 34,000 organizations that reported energy-related literature from 1986 to 1990 and updates the DOE Energy Data Base: Corporate Author Entries.

A comparison of justice frameworks for international research.

Science.gov (United States)

Pratt, Bridget; Loff, Bebe

2015-07-01

Justice frameworks have been developed for international research that provide guidance on the selection of research targets, ancillary care, research capacity strengthening, and post-trial benefits. Yet there has been limited comparison of the different frameworks. This paper examines the underlying aims and theoretical bases of three such frameworks--the fair benefits framework, the human development approach and research for health justice--and considers how their aims impact their guidance on the aforementioned four ethical issues. It shows that the frameworks' underlying objectives vary across two dimensions. First, whether they seek to prevent harmful or exploitative international research or to promote international research with health benefits for low and middle-income countries. Second, whether they address justice at the micro level or the macro level. The fair benefits framework focuses on reforming contractual elements in individual international research collaborations to ensure fairness, whereas the other two frameworks aim to connect international research with the reduction of global health inequities. The paper then highlights where there is overlap between the frameworks' requirements and where differences in the strength and content of the obligations they identify arise as a result of their varying objectives and theoretical bases. In doing so, it does not offer a critical comparison of the frameworks but rather seeks to add clarity to current debates on justice and international research by showing how they are positioned relative to one another. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Processing of Irradiated Graphite to Meet Acceptance Criteria for Waste Disposal. Results of a Coordinated Research Project

International Nuclear Information System (INIS)

2016-05-01

Graphite is widely used in the nuclear industry and in research facilities and this has led to increasing amounts of irradiated graphite residing in temporary storage facilities pending disposal. This publication arises from a coordinated research project (CRP) on the processing of irradiated graphite to meet acceptance criteria for waste disposal. It presents the findings of the CRP, the general conclusions and recommendations. The topics covered include, graphite management issues, characterization of irradiated graphite, processing and treatment, immobilization and disposal. Included on the attached CD-ROM are formal reports from the participants

NRX and NRU reactor research facilities and irradiation and examination charges

International Nuclear Information System (INIS)

1960-08-01

This report details the irradiation and examination charges on the NRX and NRU reactors at the Chalk River Nuclear Labs. It describes the NRX and NRU research facilities available to external users. It describes the various experimental holes and loops available for research. It also outlines the method used to calculate the facilities charges and the procedure for applying to use the facilities as well as the billing procedures.

NEW IRRADIATION RESEARCH FACILITIES AT THE ARMY NATICK LABORATORIES

Energy Technology Data Exchange (ETDEWEB)

Cooper, R. D.; Brynjolfsson, A.

1963-03-15

New facilities built by the U. S. Army for research on the preservation of food by ionizing radiation consist of a food processing and packaging facility and a radiation sources laboratory with two powerful low-energy radiation sources. One is a 1.3 million-curie Co/sup 60/ source consisting of 98 tubes each containing four doubly encapsulated Co/sup 60/ slugs. The second source is an electron linear accelerator with energy variable between 2 and 32 Mev. Research with the Co/sup 60/ source is concentrated on investigation of macroscopic and microscopic dose distribution in different materials irradiated with Co/sup 60/ gamma rays. Research with the linear accelerator is concentrated on dosimetry and photonuclear reactions. (A.G.W.)

Animal Research International: Editorial Policies

African Journals Online (AJOL)

Focus and Scope. Animal Research International is an online Journal inaugurated in University of Nigeria to meet the growing need for an indigenous and authoritative organ for the dissemination of the results of scientific research into the fauna of Africa and the world at large. Concise contributions on investigations on ...

Development of Pneumatic Transfer Irradiation Facility (PTS no.2) for Neutron Activation Analysis at HANARO Research Reactor

Energy Technology Data Exchange (ETDEWEB)

Chung, Y. S.; Moon, J. H.; Kim, S. H.; Sun, G. M.; Baek, S. Y.; Kim, H. R.; Kim, Y. J

2008-03-15

A pneumatic transfer irradiation system (PTS) is one of the most important facilities used during neutron irradiation of a target material for instrumental neutron activation analysis (INAA) in a research reactor. In particular, a fast pneumatic transfer system is essential for the measurement of a short half-life nuclide and a delayed neutron counting system. The pneumatic transfer irradiation system (PTS no.2) involving a manual system and an automatic system for delayed neutron activation analysis (DNAA) were reconstructed with new designs of a functional improvement at the HANARO research reactor in 2006. In this technical report, the conception, design, operation and control of PTS no.2 was described. Also the experimental results and the characteristic parameters measured by a mock-up test, a functional operation test and an irradiation test of these systems, such as the transfer time of irradiation capsule, automatic operation control by personal computer, delayed neutron counting system, the different neutron flux, the temperature of the irradiation position with an irradiation time, the radiation dose rate when the rabbit is returned, etc. are reported to provide a user information as well as a reactor's management and safety.

Fruit irradiation

International Nuclear Information System (INIS)

Anon.

1977-01-01

Food spoilage is a common problem when marketing agricultural products. Promising results have already been obtained on a number of food irradiating applications. A process is described in this paper where irradiation of sub-tropical fruits, especially mangoes and papayas, combined with conventional heat treatment results in effective insect and fungal control, delays ripening and greatly improves the quality of fruit at both export and internal markets

Microbiological Problems in Food Preservation by Irradiation. Report of a Panel on Microbiological Problems in Food Preservation by Irradiation

International Nuclear Information System (INIS)

1967-01-01

Irradiation is a technique that may increasingly be employed to help preserve the world's food supplies. Some countries have already given public-health clearance for particular irradiated foodstuffs, and pilot and semi-industrial irradiation plants have already been established or are under construction. Wide-spread industrial application is likely in the not too distant future. However, there are still problems to be solved; some of these are microbiological. A Panel on Microbiological Problems in Food Preservation by Irradiation was organized by the Joint FAO/IAEA Division of Atomic Energy in Food and Agriculture on 27 June to 1 July 1966. A detailed evaluation was made of research and development needs in radicidation (i.e. destroying micro-organisms harmful to human health), in radurization (i.e. extending the shelf life of perishable foods by reducing the spoilage micro-organisms in it), in the elimination of viruses and in the inactivation of preformed toxins. The Panel also considered the unification and standardization of experimental methodology. Recommendations were drawn up for the Directors General of the Food and Agriculture Organization of the United Nations and of the International Atomic Energy Agency on how these two organizations could best fulfil their roles in this field. It was considered important to continue sponsoring and co-ordinating research.. Establishing an international pilot and demonstration plant was thought essential for progress in development work, especially on radicidation. Experts on radio- and food microbiology and a representative of the World Health Organization attended the meeting. The proceedings contains the contributions of the members of the Panel together with the general conclusions and recommendations

Research to connect the ozone monitor into irradiation system at Hanoi Irradiation Centre

International Nuclear Information System (INIS)

Le Van Huy; Pham Duy Duong; Nguyen Dinh Hung; Vu Quoc Dat

2013-01-01

Since 2006, in order to develop radiation technology, Vietnam Atomic Energy Institute has supported Hanoi Irradiation Centre a Project titled: Upgrading the irradiation facility. According to the Project, equipment have been replaced by a new one so that the facility could be suitable for treatment of products. The facility was designed and produced by the former Russia experts. Under normal operating conditions, we are protected by shielding, detection systems, and safety procedures. A system of interlocks prevents unauthorized entry into the radiation chamber when the source is exposed. However, interlocks system have not been warning and preventing ozone gas that can affect human health. So we are having an upgrade as connecting the ozone monitor into irradiation system at Hanoi Irradiation Centre. (author)

A study by internal friction of defects produced in iron and nickel irradiated at very low temperatures; Etude au moyen du frottement interne des defauts crees par irradiation a tres basse temperature dans le fer et le nickel

Energy Technology Data Exchange (ETDEWEB)

Keating-Hart, G de [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1969-07-01

This work represents a contribution to the study of point defects in metals. After a brief review of the theory of internal friction we will discuss some technical innovations aimed at increasing the flexibility of the apparatus at our disposal. These innovations have allowed us to extend our range of measurements down to 20 deg. K. We will then discuss our experimental results. Firstly, we describe preliminary experiments on electron irradiated iron and the evidence for a laminar structure. Secondly, we present and account of the first measurements on nickel after neutron irradiation at 27 deg. K. We will compare the results with those obtained by other methods in this laboratory. Essentially we have observed transitory peaks at low temperature due to close Frenkel pairs and we have noticed the absence of a peak which would correspond to the magnetic after effect band of stage I{sub E}. An attempt is made to explain the disappearance of the observed peaks upon the application of an internal saturating magnetic field. (author) [French] Ce memoire constitue une contribution a l'etude des defauts ponctuels dans les metaux. Apres un bref apercu theorique sur le frottement interne, nous presenterons quelques realisations techniques destinees a accroitre les possibilites des instruments qui nous ont ete confies. Ces dernieres nous ont permis d'etendre la gamme des mesures jusqu'a 20 deg. K. Nous parlerons ensuite de nos resultats experimentaux. En premier lieu, ceux obtenus au cours de premieres experiences, sur le fer irradie aux electrons mettent en evidence des structures de laminage. En second lieu, nous exposerons les premieres mesures realisees sur du nickel irradie aux neutrons; nous comparerons ces resultats avec ceux obtenus par d'autres moyens experimentaux dans le laboratoire. Nous avons observe essentiellement des pics fugitifs a basse temperature dus aux paires proches de Frenckel et nous avons constate l'absence d'un pic correspondant a la bande de tramage

Development of Pneumatic Transfer Irradiation Facility (PTS no.3) for Neutron Activation Analysis at HANARO Research Reactor

Energy Technology Data Exchange (ETDEWEB)

Chung, Y. S.; Moon, J. H.; Kim, S. H.; Sun, G. M.; Baek, S. Y.; Kim, H. R.; Kim, Y. J

2008-04-15

A pneumatic transfer system (PTS) is one of the most important facilities used during neutron irradiation of a target material for instrumental neutron activation analysis (INAA) in a research reactor. In particular, a fast pneumatic transfer system is essential for the measurement of a short half-life nuclide. The pneumatic transfer irradiation system (PTS no.3) involving a manual system and an semi-automatic system were reconstructed with new designs of a functional improvement at the HANARO research reactor and NAA laboratory of RI building in 2006. In this technical report, the design, operation and control of these system (PTS no.3) was described. Also the experimental results and the characteristic parameters measured from a functional operation test and an irradiation test of these systems, such as the transfer time of irradiation capsule, the different neutron flux, the temperature of the irradiation position with an irradiation time, the radiation dose rate when the rabbit is returned, etc. are reported to provide a user information as well as a reactor's management and safety.

Irradiation Microstructure of Austenitic Steels and Cast Steels Irradiated in the BOR-60 Reactor at 320°C

Science.gov (United States)

Yang, Yong; Chen, Yiren; Huang, Yina; Allen, Todd; Rao, Appajosula

Reactor internal components are subjected to neutron irradiation in light water reactors, and with the aging of nuclear power plants around the world, irradiation-induced material degradations are of concern for reactor internals. Irradiation-induced defects resulting from displacement damage are critical for understanding degradation in structural materials. In the present work, microstructural changes due to irradiation in austenitic stainless steels and cast steels were characterized using transmission electron microscopy. The specimens were irradiated in the BOR-60 reactor, a fast breeder reactor, up to 40 dpa at 320°C. The dose rate was approximately 9.4x10-7 dpa/s. Void swelling and irradiation defects were analyzed for these specimens. A high density of faulted loops dominated the irradiated-altered microstructures. Along with previous TEM results, a dose dependence of the defect structure was established at 320°C.

Legislative and administrative control of processing of and trade in irradiated food

International Nuclear Information System (INIS)

Loaharanu, P.

1992-01-01

This presentation will focus on regulatory and administrative procedures recently developed to strengthen the control aspect of commercial use of food irradiation. Most of these developed by the International Consultative Group on Food Irradiation (ICGFI) established under the aegis of FAO, IAEA and WHO since 1984. ICGFI has produced a number of guidelines/codes of practice to assist national authorities in regulating the commercial use of food irradiation. The following regulatory control provisions will be highlighted: 1. Codes of good irradiation practice for specific application of food irradiation. 2. International inventory of authorised food irradiation facilities. 3. International training programmes for operators/plant managers of irradiation facilities and food inspectors. 4. International Dose Assurance Service (IDAS). 5. Labelling. 6. Certificate of irradiated food. (orig.) [de

The significance of neuroendocrine system state in estimation of nonstochastic effects of small doses of internal irradiation. (An experimental study)

International Nuclear Information System (INIS)

Dedov, V.I.; Norets, T.A.; Stepanenko, V.F.; Dedenkov, A.N.

1987-01-01

Data on long-term complex investigations of nonstochastic effects of low doses of internal irradiation on the level of a whole organism are presented. Experiments have been carried out with mongrel rats of both sexes and different ages up to the moment of introduction of radioactive compounds. Action of relatively and uniformly distributing in the organism radiactive compounds of selenium - 75 and sulfur - 35, which were introduced once intravenously in quantities forming absorbed doses in average on the whole body and ovaries (0.5 Gy), on endocrine glands and critical organs (up to 1.0 Gy) has been used as models of internal radiation. Data, testifying to the fact that the neuroendocrinal system, despite the existing opinion, is sensitive to action of low doses of internal irradiation compared with the recommended one as an ultimate permissible one for nonstochastic effects ( 0.5 Sv), that permits to suggest for using factors of the functional state of the neuroendocrine system as an informative and sensitive criterium of estimation of biological action of low doses of internal radiation, have been obtained. These factors along with doses on critical organs permit to estimate the degree of dangerous action of different radionuclides on the organism level. Dynamic studying of activity factors of the neuroendocrine system with simultaneous analysis of the state of harmonically dependent processes permits to estimate functional possibilities of irradiated organism, its viability, especially under conditions requiring increased stress, as well as to take into account such factors modifying a biological effect as age, animal sex, the character of absorbed dose distribution

Detection methods for irradiated foods

International Nuclear Information System (INIS)

Dyakova, A.; Tsvetkova, E.; Nikolova, R.

2005-01-01

In connection with the ongoing world application of irradiation as a technology in Food industry for increasing food safety, it became a need for methods of identification of irradiation. It was required to control international trade of irradiated foods, because of the certain that legally imposed food laws are not violated; supervise correct labeling; avoid multiple irradiation. Physical, chemical and biological methods for detection of irradiated foods as well principle that are based, are introducing in this summary

Foodstuff irradiation

International Nuclear Information System (INIS)

1982-01-01

Report written on behalf of the Danish Food Institute summarizes national and international rules and developments within food irradiation technology, chemical changes in irradiated foodstuffs, microbiological and health-related aspects of irradiation and finally technological prospects of this conservation form. Food irradiatin has not been hitherto applied in Denmark. Radiation sources and secondary radiation doses in processed food are characterized. Chemical changes due to irradiation are compared to those due to p.ex. food heating. Toxicological and microbiological tests and their results give no unequivocal answer to the problem whether a foodstuff has been irradiated. The most likely application fields in Denmark are for low radiation dosis inhibition of germination, riping delay and insecticide. Medium dosis (1-10 kGy) can reduce bacteria number while high dosis (10-50 kGy) will enable total elimination of microorganisms and viruses. Food irradiation can be acceptable as technological possibility with reservation, that further studies follow. (EG)

IFMIF (International Fusion Materials Irradiation Facility) key element technology phase interim report

Energy Technology Data Exchange (ETDEWEB)

Nakamura, Hiroo; Ida, Mizuho; Sugimoto, Masayoshi; Takeuchi, Hiroshi; Yutani, Toshiaki (eds.) [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

2002-03-01

Activities of International Fusion Materials Irradiation Facility (IFMIF) have been performed under an IEA collaboration since 1995. IFMIF is an accelerator-based deuteron (D{sup +})-lithium (Li) neutron source designed to produce an intense neutron field (2 MW/m{sup 2}, 20 dpa/year for Fe) in a volume of 500 cm{sup 3} for testing candidate fusion materials. In 2000, a 3 year Key Element technology Phase (KEP) of IFMIF was started to reduce the key technology risk factors. This interim report summarizes the KEP activities until mid 2001 in the major project work-breakdown areas of accelerator, target, test facilities and design integration. (author)

Acceptance, control of and trade in irradiated food

International Nuclear Information System (INIS)

1989-01-01

Proceedings of an International Conference on the Acceptance, Control of and Trade in Irradiated Food jointly organized by the Food and Agriculture Organization of the United Nations, the World Health Organization, the International Atomic Energy Agency and the International Trade Centre-UNCTAD/GATT and held in Geneva, 12-16 December 1988. The Conference was prompted by the lack of acceptance by some governments, which do not see a need for the application of food irradiation technology in their own countries, and as a consequence may hamper its use in other countries where its application could significantly improve consumer health and nutrition, as well as national economic and trading potential. This publication contains discussions on the key issues of the wholesomeness of irradiated food, the contribution of this technology to public health, food security and international trade, the control of the process to ensure its correct application for consumer protection, and the acceptance of irradiated food by industry and consumers. The proceedings include the International Document on Food Irradiation, highlighting the major issues related to the acceptance of irradiated food by consumers, governmental and intergovernmental activities, the control of the process, and trade. A number of Member States formally expressed their views on this International Document, expressing either endorsement or reservation, and their statements are included in these proceedings. Refs, fig and tabs

A radiation service centre for research and large-scale irradiation

International Nuclear Information System (INIS)

Offermann, B.P.; Hofmann, E.G.

1978-01-01

In the near future radiation processing of food may change from the present laboratory-scale to large industrial application. This step will require large irradiation facilities with high flexibility, a safe dose control system and simple food-handling systems. Some design parameters of such an irradiation facility have already been realized at the AEG-Telefunken Radiation Service Centre in Wedel. This centre came into operation in autumn 1976. It is equipped with one research-type high-power X-ray unit (200kV/32mA) and one industrial-type electron accelerator (1500kV/37.5kW). Handling systems are available for radiation crosslinking of wire and cable insulations, of plastic films, for irradiation treatment of components and parts of different types and coatings as also of sewage sludge and waste water. Some of these handling systems can be used for food irradiation too. Other handling systems will be added sometime later. As an additional service the Company's existing material and environmental testing laboratory will be available. The centre is already being used by many interested companies to investigate the effects of radiation on a broad range of organic and inorganic materials, to develop special processing equipment, to process supplied products and to perform R and D work and contracts. The service centre fills an existing gap and will have an impact on the commercialization of radiation processing techniques in Europe. (author)

Irradiation experience of IPEN fuel at IEA-R1 research reactor

International Nuclear Information System (INIS)

Perrotta, Jose A.; Neto, Adolfo; Durazzo, Michelangelo; Souza, Jose A.B. de; Frajndlich, Roberto

1998-01-01

IPEN/CNEN-SP produces, for its IEA-R1 Research Reactor, MTR fuel assemblies based on U 3 O 8 -Al dispersion fuel type. Since 1985 a qualification program on these fuel assemblies has been performed. Average 235 U burnup of 30% and peak burnup of 50% was already achieved by these fuel assemblies. This paper presents some results acquire, by these fuel assemblies, under irradiation at IEA-R1 Research Reactor. (author)

Internal irradiation by radon daughters in Bulgarian uranium mines over the period 1956-1990

International Nuclear Information System (INIS)

Dimitrov, M.; Presiyanov, D.

1993-01-01

The results of over 30-years' radiation monitoring in Bulgarian uranium mines are summed up in retrospect. The overall organization and the parameters monitored during the different periods are discussed. A radiological characteristic of the working environment is presented which includes radon and its decay products. The internal irradiation levels during different time periods and in different mines have been estimated. The health costs of uranium mining in Bulgaria are discussed and conclusions and recommendations for radiological control are made. (author)

Research in radiobiology: Annual report of work in progress in the internal irradiation program

International Nuclear Information System (INIS)

Miller, S.C.; Buster, D.S.

1987-01-01

In the early 1950's the Atomic Energy Commission established at the University of Utah a large, long-term study designed to investigate the toxicity of internally deposited radionuclides in beagles. The first animals were injected on December 1, 1952 and thus began an odyssey unusual in modern science both for its duration and continued scientific interest and relevance. The original dogs were injected with 239 Pu and 226 Ra. Later, studies were initiated with 241 Am, 249 Cf, 252 Cf, 253 Es, 224 Ra, 228 Ra, 90 Sr, and 228 Th. These studies were unique and have and will continue to contribute valuable scientific information on the behavior and effects of these substances in biological systems. We feel that the data collected from these studies will be useful for many decades to come as we ask more demanding questions relative to radionuclides and environmental, biological and health issues. While this publication will be the last of our series Research in Radiobiology, the lifespan carcinogenesis studies are continuing under a collaborative arrangement with the I.T.R.I. Beginning in 1988, the colony status tables of dogs in the Utah studies and reports of research by the Radiobiology faculty will be included in the annual I.T.R.I. report. Under our new collaborative arrangements with the I.T.R.I. for the conduct of the lifespan carcinogenesis studies, we expect a continued high level of scientific productivity from our faculty

Technology management for the installation of a food irradiator in the Ribeira Valley

International Nuclear Information System (INIS)

Ghobril, Carlos Nabil

2008-01-01

This thesis presents a research focused on technology management applied to technical and economic viability study for the installation of a multi propose irradiator in Vale do Ribeira. First, the work presents the regional characteristics that shows Vale do Ribeira as the less economically developed region of Sao Paulo state. On the other side, it shows the emergence of irradiation techniques applied to the food industry, with accepted and recommended results by international authorities. Technology management, from the conceptual basis here presented, links regional environment reality to available technical knowledge, in search of regional development. The methodology was composed by the use of bibliographical, qualitative and quantitative research, and the analysis was supported by the use of statistical techniques and economic viability analysis. The present research concludes that there is technical and economic viability of the venture here analyzed, although it should be recommended more studies about banana irradiation and about Brazilian consumer acceptance to irradiated food products. (author)

Food Irradiation Regulations And Code Of Practice

International Nuclear Information System (INIS)

Jimba, B.W. Centre For Energy Research And Training, Ahmadu Bello University, Zaria,

1996-01-01

Official attitude towards irradiated food is determined by factors such as: level of scientific knowledge, consumer habits, food shortages, agricultural production and technological know-how. To date, 39 countries have accepted the process for one or more food items while 27 nations carry out the process on a commercial basis. Regulations and codes of practice is essential for consumer confidence while uniformity of regulations, at the international level, will enhance international trade in irradiated food items. The internationally accepted Codex Standard on irradiated food and Codes of Practice for the operation of irradiation facilities, adopted in 1983, forms the basis for International regulations and a template for nations in the development of regulations. This paper discusses the basic legal requirements for licensing the process, procedures, facility and the operator and suggests a framework for a national regulation based on experiences of Hungary, Brazil and Israel

Information for irradiation and post-irradiation of the silicide fuel element prototype P-07

International Nuclear Information System (INIS)

Abbate, Maximo J.; Sbaffoni, Maria M.

2003-01-01

Included in the 'Silicides' Project, developed by the Nuclear Fuels Department of the National Atomic Energy Commission (CNEA), it is foreseen the qualification of this type of fuel for research reactors in order to be used in the Argentine RA-3 reactor and to confirm the CNEA as an international supplier. The paper presents basic information on several parameters corresponding to the new silicide prototype, called P-07, to be taken into account for its irradiation, postirradiation and qualification. (author)

Revealing by secondary electronic emission of internal electric fields in the yttriated zirconia, irradiated by electrons of 1 MeV

International Nuclear Information System (INIS)

Blaise, G.; Paris-11 Univ., 91 - Orsay

2007-01-01

The defects due to irradiation in a dielectric material present an activity which can generate macroscopic internal electric fields. A method of investigation of these fields, based on the measure of the Secondary Electronic Emission coefficient, has been developed on a scanning electric microscope. This ones contains two low noise detectors which respectively measure the influence current I IC produced by the charges trapping in the material and the current I SB due to secondary and backscattered electrons which come from the sample. The Secondary Emission coefficient is given by σ=I SB /(I SB +I IC ). The charges trapping during an electrons injection leads to a variation of σ for its intrinsic value σ 0 relative to the uncharged material, until the stationary value σ st =1 corresponding to the auto-regulated condition. This variation is due to the development of an internal electric field produced by the accumulation of the charges trapped during injection. In comparing the evolutions of σ of a fresh yttriated zirconia and of an yttriated zirconia irradiated by electrons of 1 MeV with a dose rate of 10 18 e/cm 2 , it has been revealed that an internal field (due to irradiation) of about 0.5*10 6 V/m exists at a depth of the micron order. This field, directed towards the outside of the material surface, is attributed to the F + defects and to the T centers produced by the impact of the electrons of 1 MeV. In carrying out annealings until 1000 K, a progressive disappearance of this field is observed in the temperature range of 400-600 K, directly due to the F + defects and T centers recovery, as it has been observed by ESR. An internal field three times weaker than the preceding ones has been revealed at a few nm under the surface. Its disappearance from a temperature of 1000 K suggests that it is due to the redistribution of the chemical species into the surface, during the irradiation with electrons of 1 MeV. (O.M.)

Effect of irradiation in design of LMFBR internals

International Nuclear Information System (INIS)

Tavassoli, A.A.; Cowan, A.; Vries, M. de; Heesen, E.

1990-01-01

Internal structures of nuclear power reactors are essentially made with the austenitic stainless steels Types 304L and 316L. In service these structures receive low to moderate neutron doses. In this paper, the work undertaken by the European Fast Breeder Working Group is reviewed. Conclusions drawn to this date are presented and tentative reduction factors to be used in design are discussed in terms of the number of displacements per atom (dpa) and the quantity of helium generated in the steel (appm He). For the lower core structure which operates at about 400 0 C existing design rules can be used for parts which are subjected to less than 2 dpa despite a reduction in ductility and toughness which occurs above about 0.8 dpa. For the above core structure which operates at about 550 0 C interim and rather conservative stress reduction factors are proposed which can become effective at helium levels as low as 10 -4 appm. Particular attention is paid to: - irradiation temperature, - neutron flux and fluence, - steel type and grade, - heat treatment and boron distribution, - weld metal composition and procedure (TIG,MMA,...), to ensure that service conditions are represented as closely as possible

Fuel irradiation research of Japan at OECD Halden Reactor Project. Achievement of joint researches between JAERI and other organizations in the period from 1994 to 1996

International Nuclear Information System (INIS)

Uetsuka, Hiroshi; Nakamura, Jinichi; Kinoshita, Motoyasu

1998-01-01

JAERI has performed cooperative researches with many Japanese agencies and companies by means of the Halden Boiling Heavy Water Reactor (HBWR) which is located at Halden in Norway. These cooperative researches are carried out based on the contracts of the cooperative researches, which are revised every three years, in accordance with the renewal of the participation of JAERI to the OECD Halden Reactor Project. This report summaries the objectives, contents and the outlines of the achievements of the cooperative researches during the three years from 1994 January to 1996 December. During the period, ten cooperative researches had been carried out, and two of them had finished during the period and other eight researches has been continued to the next three year period. There are many research items, and most of them are irradiation test researches of advanced fuel and cladding concerned with the high burnup utilization of LWR fuel or MOX fuel irradiation researches to prepare for the introduction of Plutonium utilization in LWRs. The researches of fuel irradiation usually take long time because of the characteristics of these kind of research work, and three years are usually not enough to obtain some achievements from the irradiation tests. Therefore, eight tests have been continued after the three year period. In this report, the achievements of the continued researches to the next three year period are not final one but a kind of progress report. (author) kind of progress report. (author)

Rupture of an internal carotid artery pseudoaneurysm after irradiation for a nasopharyngeal carcinoma. Case report

International Nuclear Information System (INIS)

Hanada, Yukiko; Nakamura, Megumi; Sasai, Hisanori; Kamakura, Aya; Sakata, Yoshiharu; Miyahara, Hiroshi

2013-01-01

The primary treatment of nasopharyngeal carcinoma (NPC) has been external radiotherapy. Rupture of an internal carotid artery (ICA) pseudoaneurysm is a rare complication of irradiation therapy for a nasopharyngeal carcinoma. A 78 years old man had a history of NPC treated with radiotherapy in 1993. He was admitted to the hospital because of epistaxis. Angiography showed an ICA pseudoaneurysm pointing medially to the nasopharynx. Coil embolization of the ICA was performed, but cerebral infarction occurred. Internal carotid artery (ICA) pseudoaneurysms are an uncommon but potentially lethal condition. Angiography is the mainstay of diagnosis of the aneurysm and planning the embolization of the ICA. We should be more aware of this complication in NPC patients. (author)

Processes of international collaboration in management research

DEFF Research Database (Denmark)

Jonsen, Karsten; Butler, Christina; Mäkelä, Kristiina

2013-01-01

Scientists and academics increasingly work on collaborative projects and write papers in international research teams. This trend is driven by greater publishing demands in terms of the quality and breadth of data and analysis methods, which tend to be difficult to achieve without collaborating...... across institutional and national boundaries. Yet, our understanding of the collaborative processes in an academic setting and the potential tensions associated with them remains limited. We use a reflexive, autoethnographic approach to explicitly investigate our own experiences of international...... collaborative research. We offer systematic insights into the social and intellectual processes of academic collaborative writing, identifying six lessons and two key tensions that influence the success of international research teams. Our findings may benefit the formation of future coauthor teams...

Rethinking Ethnocentrism in International Business Research

DEFF Research Database (Denmark)

Michailova, Snejina; Piekkari, Rebecca; Storgaard, Marianne

2017-01-01

in other countries. In international business research, ethnocentrism is usually considered undesirable, something that should be eliminated. However, sociology, anthropology, and psychology, where the concept was originally established, have adopted a wider, far more nuanced and intellectually richer view......Research summary: For nearly five decades, international business (IB) research in general and the literature on organizational design and staffing of multinationals in particular have treated ethnocentrism mainly as an adverse attribute. Limited attention has been paid to the disciplines...... that originally established the concept—anthropology, sociology, and psychology. These disciplines have examined ethnocentrism as a positive, neutral, or negative phenomenon with a complex hierarchical structure. IB literature, in turn, has almost exclusively adopted a negative view, suggesting that ethnocentrism...

International Society for Stem Cell Research

Science.gov (United States)

... renowned stem cell and regenerative medicine community. More stem cell research Take a closer look Recent Blogs View ... story independent nonprofit organization & the voice of the stem cell research community The International Society for Stem Cell ...

Food preservation by irradiation

International Nuclear Information System (INIS)

Labots, H.; Huis in 't Veld, G.J.P.; Verrips, C.T.

1985-01-01

After a review of several methods for the preservation of food and the routes of food infections, the following chapters are devoted to the preservation by irradiation. Applications and legal aspects of food irradiation are described. Special reference is made to the international situation. (Auth.)

How international is internationally collaborated research? A bibliometric study of Russian surname holder collaboration networks

Energy Technology Data Exchange (ETDEWEB)

Karaulova, M.; Goek, A.; Shapira, P.

2016-07-01

International research performance indicators attain increased attention in science policy. They are seen to reflect relative competitiveness of a country in producing leading research (in terms of cited papers) and its commercialisation (in terms of assigned patents). However, more studies point to ongoing global bias in production, composition and assessment of research performance metrics (Rafols et al., 2012; van Leeuwen et al., 2001). As research performance indicators are used increasingly in national science policy and in influential international rankings, it is important to understand their inherent bias. For instance, explosive growth of international collaboration in science is widely reported (Glänzel, 2001), and is generally perceived as having beneficial ‘knowledge exchange’ effect for involved parties. It is recognised as a capacity-building factor of domestic research indicating the increase in research quality (Bornmann et al., 2015). However, existing research has reported reproduction of uneven global relations between countries in terms of science and technology. For example, patterns of international cooperation in nanotechnology are still centred on the developed countries, which are key nodes in international networks (Shapira and Wang, 2010). (Author)

International Business Research: Coauthorship Patterns and Quality

Science.gov (United States)

Chan, Kam C; Fung, Hung-Gay; Leung, Wai K.

2008-01-01

The authors investigate published international business research in four international business journals over a 10-year period, 1995-2004: (a) patterns of coauthorship across regions, and (b) the relation between coauthorship patterns and the quality of international business (IB) articles. A cross-region coauthorship enhances the quality of an…

Characterization of the fast neutron irradiation facility of the Portuguese Research Reactor after core conversion

International Nuclear Information System (INIS)

Marques, J.G.; Sousa, M.; Santos, J.P.; Fernandes, A.C.

2011-01-01

The fast neutron irradiation facility of the Portuguese Research Reactor was characterized after the reduction in uranium enrichment and rearrangement of the core configuration. In this work we report on the determination of the hardness parameter and the 1 MeV equivalent neutron flux along the facility, in the new irradiation conditions, following ASTM E722 standard.

Irradiation Assisted Stress Corrosion Cracking of austenitic stainless steels

Energy Technology Data Exchange (ETDEWEB)

Tsukada, Takashi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

1998-03-01

Irradiation Assisted Stress Corrosion Cracking (IASCC) of austenitic stainless steels in oxygenated high temperature water was studied. The IASCC failure has been considered as a degradation phenomenon potential not only in the present light water reactors but rather common in systems where the materials are exposed simultaneously to radiation and water environments. In this study, effects of the material and environmental factors on the IASCC of austenitic stainless steels were investigated in order to understand the underlying mechanism. The following three types of materials were examined: a series of model alloys irradiated at normal water-cooled research reactors (JRR-3M and JMTR), the material irradiated at a spectrally tailored mixed-spectrum research reactor (ORR), and the material sampled from a duct tube of a fuel assembly used in the experimental LMFBR (JOYO). Post-irradiation stress corrosion cracking tests in a high-temperature water, electrochemical corrosion tests, etc., were performed at hot laboratories. Based on the results obtained, analyses were made on the effects of alloying/impurity elements, irradiation/testing temperatures and material processing, (i.e., post-irradiation annealing and cold working) on the cracking behavior. On the basis of the analyses, possible remedies against IASCC in the core internals were discussed from viewpoints of complex combined effects among materials, environment and processing factors. (author). 156 refs.

Food preservation by irradiation

International Nuclear Information System (INIS)

Gottschalk, M.

1978-01-01

In November, 1977, an International Symposium on Food Preservation by Irradiation was held at Wageningen, the Netherlands. About 200 participants attended the Symposium which was organised by the International Atomic Energy Agency, the Food and Agriculture Organization of the United Nations and the World Health Organization; a reflection of the active interest which is being shown in food irradiation processing, particularly among developing countries. The 75 papers presented provided an excellent review of the current status of food irradiation on a wide range of different topics, and the Symposium also afforded the valuable opportunity for informal discussion among the participants and for developing personal contacts. A brief survey of the salient aspects discussed during the course of the meeting are reported on. (orig.) [de

Management of spent fuel from research and prototype power reactors and residues from post-irradiation examination of fuel

International Nuclear Information System (INIS)

1989-09-01

The safe and economic management of spent fuel is important for all countries which have nuclear research or power reactors. It involves all aspects of the handling, transportation, storage, conditioning and reprocessing or final disposal of the spent fuel. In the case of spent fuel management from power reactors the shortage of available reprocessing capacity and the rising economic interest in the direct disposal of spent fuel have led to an increasing interest in the long term storage and management of spent fuel. The IAEA has played a major role in coordinating the national activities of the Member States in this area. It was against this background that the Technical Committee Meeting on ''Safe Management of Spent Fuel From Research Reactors, Prototype Power Reactors and Fuel From Commercial Power Reactors That Has Been Subjected to PIE (Post Irradiated Examination)'' (28th November - 1st December 1988) was organised. The aims of the current meeting have been to: 1. Review the state-of-the-art in the field of management of spent fuel from research and prototype power reactors, as well as the residues from post irradiation examination of commercial power reactor fuel. The emphasis was to be on the safe handling, conditioning, transportation, storage and/or disposal of the spent fuel during operation and final decommissioning of the reactors. Information was sought on design details, including shielding, criticality and radionuclide release prevention, heat removal, automation and remote control, planning and staff training; licensing and operational practices during each of the phases of spent fuel management. 2. Identify areas where additional research and development are needed. 3. Recommend areas for future international cooperation in this field. Refs, figs and tabs

Capsule Development and Utilization for Material Irradiation Tests

International Nuclear Information System (INIS)

Kang, Young Hwan; Kim, B. G.; Joo, K. N.

2003-05-01

The objective of this project was to establish basic capsule irradiation technology using the multi-purpose research reactor [HANARO] to eventually support national R and D projects of advanced fuel and materials related to domestic nuclear power plants and next generation reactors. There are several national nuclear projects in KAERI, which require several irradiation tests to investigate in-pile behavior of nuclear reactor fuel and materials for the R and D of several types of fuels such as advanced PWR and DUPIC fuels and for the R and D of structural materials such as RPV(reactor pressure vessel) steel, Inconel, zirconium alloy, and stainless steel. At the moment, internal and external researchers in institutes, industries and universities are interested in investigating the irradiation characteristics of materials using the irradiation facilities of HANARO. For these kinds of material irradiation tests, it is important to develop various capsules using our own techniques. The development of capsules requires several leading-edge technologies and our own experiences related to design and fabrication. In the second phase from April 1,2000 to March 31, 2003, the utilization technologies were developed using various sensors for the measurements of temperature, pressure and displacement, and instrumented capsule technologies for the required fuel irradiation tests were developed. In addition, the improvement of the existing capsule technologies and the development of an in-situ measurable creep capsule for specific purposes were done to meet the various requirements of users

Contributions of the food irradiation technology to the nutritional and alimentary safety

International Nuclear Information System (INIS)

Ferreira, Sonia Regina Schauffert

1999-01-01

This work is a bibliographic review about the contributions of the food irradiation technology on nutritional and alimentary safety. Subjected to research and development for more than 60 years, these technology was approved by a jointly FAO/WHO/IAEA Expert Committees in 1980 with the conclusion that the irradiation of food up to an overall average dose of 10 kGy present no toxicological hazard and introduce no special nutritional or microbiological problems. Following these conclusions general standards and practices for food irradiation were adopted by the Codex Alimentarium Commission in 1983, opening the possibilities for internal applications and international commerce of irradiated food in many countries. Radiation from radioisotopes sources, electron accelerators or X-ray generators can be applied to food in order to reduce the microbial load, insect disinfestation, improving the shelf life extension of the products. Absorbed doses up to 10 kGy level do not introduce significant alterations in the macro or micro nutrients contents or in the sensorial characteristic of irradiated food. Although food safety can be related with many other important topics, irradiation technology improving food quality, reducing food spoilage during preservation and preventing problems related with food borne disease present a good potential to contribute with the foment and guaranty of the nutritional and alimentary safety. (author)

Estimations on uranium silicide fuel prototypes for their irradiation and postirradiation

International Nuclear Information System (INIS)

Sbaffoni, Maria M.

2000-01-01

The 'Silicide' project includes the qualification of this type of research reactor fuel to be used i.e. in the Argentine RA-3 and to confirm CNEA's role as an international supplier. The present paper shows complementary basic information for P-04 prototype post-irradiation, which is already under way, and some parameter values related to the new P-06 prototype to be taken into account for planning its irradiation and post-irradiation. The reliability of these values has been evaluated through comparison with experimental results. The reported results contribute, also, to a parallel study on the nuclear data libraries used in calculations for this type of reactor. (author)

Food irradiation seminar: Asia and the Pacific

International Nuclear Information System (INIS)

Mitchell, G.E.

1986-01-01

The report covers the Seminar for Asia and the Pacific on the practical application of food irradiation. The seminar assessed the practical application of food irradiation processes, commercial utilisation and international trade of irradiated food

Regulatory aspect of food irradiation

International Nuclear Information System (INIS)

Harrison Aziz

1985-01-01

Interest in the process of food irradiation is reviewed once again internationally. Although food irradiation has been thoroughly investigated, global acceptance is still lacking. Factors which impede the progress of the technology are discussed here. (author)

Design of small-animal thermal neutron irradiation facility at the Brookhaven Medical Research Reactor

International Nuclear Information System (INIS)

Liu, H.B.

1996-01-01

The broad beam facility (BBF) at the Brookhaven Medical Research Reactor (BMRR) can provide a thermal neutron beam with flux intensity and quality comparable to the beam currently used for research on neutron capture therapy using cell-culture and small-animal irradiations. Monte Carlo computations were made, first, to compare with the dosimetric measurements at the existing BBF and, second, to calculate the neutron and gamma fluxes and doses expected at the proposed BBF. Multiple cell cultures or small animals could be irradiated simultaneously at the so-modified BBF under conditions similar to or better than those individual animals irradiated at the existing thermal neutron irradiation Facility (TNIF) of the BMRR. The flux intensity of the collimated thermal neutron beam at the proposed BBF would be 1.7 x 10 10 n/cm 2 ·s at 3-MW reactor power, the same as at the TNIF. However, the proposed collimated beam would have much lower gamma (0.89 x 10 -11 cGy·cm 2 /n th ) and fast neutron (0.58 x 10 -11 cGy·cm 2 /n th ) contaminations, 64 and 19% of those at the TNIF, respectively. The feasibility of remodeling the facility is discussed

Integrative review of international nursing research in Mainland China.

Science.gov (United States)

Li, M; Wei, L; Liu, H; Tang, L

2009-03-01

Nursing research in Mainland China is divided into two parts: domestic nursing research, comprising all publications in Chinese; and international nursing research, comprising all publications in English. Domestic nursing research has been developing rapidly, demonstrated by the increase in new national or regional journals and publications. However, little is known about the extent of international research. To outline the development of international nursing research publications in Mainland China and to provide suggestions for future development. All of the papers were retrieved from PubMed. The key search phase was 'China or P.R.China NOT Hong Kong NOT Taiwan NOT Macao [AD]', with the limits of 'English', 'nursing journals' as well as the published date up to '2007/09/30'. PubMed recorded 57 English papers that were originally conducted in Mainland China during the search period from 1989 to 30 September 2007. Thirty-seven of the total 57 (65%) publications were contributed by Beijing, Shanghai and Hubei. Forty-four of the 57 publications were conducted with collaborators from Hong Kong, the USA, the UK and Canada. Thirteen publications were funded by international societies, while only three were funded by the Chinese government. The research topics mainly focused on clinical research, nursing education and nursing management. This study indicates that international nursing research has been growing slowly in Mainland China along with provincial variations. The suggestions to improve nursing research include the reform of nursing education, the enhancement of the collaboration with the international societies and the establishment of research priorities.

The prospect of food irradiation and the contribution of radiation chemistry to enact the hygienic safety standard of irradiated foods

International Nuclear Information System (INIS)

Wu Jilan; Yuan Rongyao

1986-01-01

Now, it is said that we are at the dawn of food irradiation application both nationally and internationally. However, referring to the acceptability of customers the labeling of irradiated foods has been a nightmare to the food processors. On the other hand the recommended international standard has the shortcomings of thinking in absolute terms. In this paper a proposal which puts special emphasis on enacting hygienic safety standard of individual irradiated food is recommended. The hygienic safety standard of the irradiated food may be classified in three classes: 1) its hygienic safety standard is similar to that of common food; 2) the maximum permissible quantities of harmful compounds induced by radiation must be controlled; and 3) the quantity of unique radiolysis products may by dutermined. Radiation chemistry plays an important role in enacting the hygienic safety standard of irradiated foods. For international cooperation in this field some suggestions are made

International Journal of Health Research

African Journals Online (AJOL)

Erah

Reference Ranges for Fasting Profiles and Oral Glucose Tolerance Test ... Submission of Manuscript: The International Journal of Health Research uses a journal management software to allow .... medical textbooks [4, 5] and internet. In the.

Enhancing international collaboration among early-career researchers

Science.gov (United States)

Carroll, Jennifer K; Albada, Akke; Farahani, Mansoureh; Lithner, Maria; Neumann, Melanie; Sandhu, Harbinder; Shepherd, Heather L

2010-01-01

Objective The European Association of Communication in Healthcare (EACH) Early Career Researchers Network (ECRN) aims are to (1) promote international collaboration among young investigators and (2) provide a support network for future innovative communication research projects. In October 2009, Miami, USA at a workshop facilitated by the ECRN at the International Conference on Communication in Healthcare (ICCH) hosted by the American Academy of Communication in Healthcare we explored common facilitators and challenges faced by early career researchers in health communication research. Methods Attendees introduced themselves, their research area(s) of interest, and listed one facilitator and one barrier for their career development. EACH ECRN members then led a discussion of facilitators and challenges encountered in communication research projects and career development. We discussed potential collaboration opportunities, future goals, and activities. Results Having supportive collegial relationships, institutional support, job security, and funding are critical facilitators for early career investigators. Key challenges include difficulty with time management and prioritizing, limited resources, and contacts. Conclusion International collaboration among early career researchers is a feasible and effective means to address important challenges, by increasing opportunities for professional support and networking, problem-solving, discussion of data, and ultimately publishing. Practice Implications Future AACH-EACH Early Career Researcher Networks should continue to build collaborations by developing shared research projects, papers, and other scholarly products. PMID:20663630

Modern International Research Groups: Networks and Infrastructure

Science.gov (United States)

Katehi, Linda

2009-05-01

In a globalized economy, education and research are becoming increasing international in content and context. Academic and research institutions worldwide try to internationalize their programs by setting formal or informal collaborations. An education that is enhanced by international experiences leads to mobility of the science and technology workforce. Existing academic cultures and research structures are at odds with efforts to internationalize education. For the past 20-30 years, the US has recognized the need to improve the abroad experience of our scientists and technologists: however progress has been slow. Despite a number of both federally and privately supported programs, efforts to scale up the numbers of participants have not been satisfactory. The exchange is imbalanced as more foreign scientists and researchers move to the US than the other way around. There are a number of issues that contribute to this imbalance but we could consider the US academic career system, as defined by its policies and practices, as a barrier to internationalizing the early career faculty experience. Strict curricula, pre-tenure policies and financial commitments discourage students, post doctoral fellows and pre-tenure faculty from taking international leaves to participate in research abroad experiences. Specifically, achieving an international experience requires funding that is not provided by the universities. Furthermore, intellectual property requirements and constraints in pre-tenure probationary periods may discourage students and faculty from collaborations with peers across the Atlantic or Pacific or across the American continent. Environments that support early career networking are not available. This presentation will discuss the increasing need for international collaborations and will explore the need for additional programs, more integration, better conditions and improved infrastructures that can encourage and support mobility of scientists. In addition

International Journal of Herbs and Pharmacological Research ...

African Journals Online (AJOL)

PROMOTING ACCESS TO AFRICAN RESEARCH ... International Journal of Herbs and Pharmacological Research: Advanced Search ... either term; e.g., education OR research; Use parentheses to create more complex queries; ... African Journal of Biomedical Research, African Journal of Biotechnology, African Journal of ...

Progress in developing the concept for the irradiation research facility

International Nuclear Information System (INIS)

Lee, A.G.; Bishop, W.E.; Gillespie, G.E.; Zeng, Y.

1996-04-01

At the 16th annual Canadian Nuclear Society conference, AECL presented the case for replacing the NRU reactor with an Irradiation Research Facility (IRF) to test CANDU fuels and materials and to perform advanced materials research using neutrons. AECL developed a cost estimate of $500 million for the reference IRF concept, and estimated that it would require 87 months to complete. AECL has initiated a pre-project program to develop the IRF concept and to minimize uncertainties related to feasibility and licensability, and to examine options for reducing the overall project cost before project implementation begins. (author) 10 refs., 2 figs

Multipurpose research reactors

International Nuclear Information System (INIS)

1988-01-01

The international symposium on the utilization of multipurpose research reactors and related international co-operation was organized by the IAEA to provide for information exchange on current uses of research reactors and international co-operative projects. The symposium was attended by about 140 participants from 36 countries and two international organizations. There were 49 oral presentations of papers and 24 poster presentations. The presentations were divided into 7 sessions devoted to the following topics: neutron beam research and applications of neutron scattering (6 papers and 1 poster), reactor engineering (6 papers and 5 posters), irradiation testing of fuel and material for fission and fusion reactors (6 papers and 10 posters), research reactor utilization programmes (13 papers and 4 posters), neutron capture therapy (4 papers), neutron activation analysis (3 papers and 4 posters), application of small reactors in research and training (11 papers). A separate abstract was prepared for each of these papers. Refs, figs and tabs

Thermonuclear controlled fusion: international cooperation

International Nuclear Information System (INIS)

Conscience, J.-F.

2001-01-01

This report summarizes the current worldwide status of research in the field of thermonuclear controlled fusion as well as the international research programme planed for the next decades. The two main projects will be the ITER facility (International Thermonuclear Experimental Reactor) that should produce 10 times more energy than the energy injected, and the IFMIF (International Fusion Materials Irradiation Facility) designed to study the reactions of materials under intense neutron fluxes. The future of the pioneering JET facility (Joint European Torus) is also discussed. The engagement of the various countries (USA, Japan, Germany, Russian Federation and Canada) and international organisations (EURATOM and IEA) in terms of investment and research is described. Switzerland is involved in this program through an agreement with EURATOM and is mainly dedicated to experimental studies with the TCV machine in Lausanne and numerical studies of plasma configurations. It will participate to the development of the microwave plasma heating system for the ITER machine

Development of Pneumatic Transfer Irradiation Facility (PTS no.1) for Neutron Activation Analysis at HANARO Research Reactor

Energy Technology Data Exchange (ETDEWEB)

Chung, Y. S.; Moon, J. H.; Kim, S. H.; Sun, G. M.; Baek, S. Y.; Kim, H. R.; Kim, Y. J

2008-03-15

A pneumatic transfer system (PTS) is one of the most important facilities used during neutron irradiation of a target material for instrumental neutron activation analysis (INAA) in a research reactor. In particular, a fast pneumatic transfer system is essential for the measurement of a short half-life nuclide and a delayed neutron counting system. The pneumatic transfer system (PTS no.1) involving a manual system and an semiautomatic system were reconstructed with new designs of a functional improvement at the HANARO research reactor in 2006. In this technical report, the conception, design, operation and control of these system (PTS no.1) was described. Also the experimental results and the characteristic parameters measured by a mock-up test, a functional operation test and an irradiation test of these systems, such as the transfer time of irradiation capsule, the different neutron flux, the temperature of the irradiation position with an irradiation time, the radiation dose rate when the rabbit is returned, etc. are reported to provide a user information as well as a reactor's management and safety.

International Journal of Health Research

African Journals Online (AJOL)

Erah

2008-11-03

Nov 3, 2008 ... The International Journal of Health Research is an online ... forum for the communication and evaluation of data, methods and findings ... Introduction ... worms are pathogenic for human beings. .... McGraw Hill Co., New York,.

Answers to the questions about food irradiation. Concerning results of animal experiments in the specified integrated research. Data carrying a problem in human health were obtained?

International Nuclear Information System (INIS)

Ito, Hitoshi

2007-01-01

Experts of Food and Agriculture Organization (FAO)/ International Atomic Energy Agency (IAEA)/ World Health Organization (WHO) committee obtained their conclusion in 1980 that food irradiated with <10 kGy of radiation is safe for human health, which is now globally approved. However, in Japan, there have been still opposite opinions based on the doubt in the title on the safety of irradiated food. In this paper, the author answers those questions as he was a member to arrange the Research in the title for food irradiation. Described are data presentation and explanation about results of toxicity studies of diets added with irradiated materials of: weight reductions in rat ovary by irradiated potato (ip) in chronic studies, and in mouse testicle and ovary of F3 generation from the ancestor mice kept on diet with irradiated onion (io); bone malformation in mice by io; and reduction of body weight gain in female rats by ip and increase of mortality of male rats by ip. These are analyzed on the aspects of radiation dose-response, sustained tendency of results throughout the living period or generation, and apparent abnormality by other factors; and normal variation due to individual difference is pointed out to contribute to these findings. The safety test of irradiated food has been conducted valid not only in animal experiments but also other tests like genotoxicity and analysis of radiation-degraded products. (R.T.)

Improvement of neutron irradiation field of research reactors for BNCT

International Nuclear Information System (INIS)

Aizawa, Otohiko

1992-01-01

The modification of research reactors for an improvement of the irradiation field for BNCT has been investigated in comparison with the field characteristics of the 'old' configuration at the Musashi reactor. The new point of this study is that the evaluation has been done by using an arrangement including both the facility structure and a whole-body phantom, and also by considering the whole-body absorbed dose. (author)

Food irradiation: Technology transfer in Asia, practical experiences

Science.gov (United States)

Kunstadt, Peter; Eng, P.

1993-10-01

Nordion International Inc., in cooperation with the Thai Office of Atomic Energy for Peace (OAEP) and the Canadian International Development Agency (CIDA) recently completed a unique food irradiation technology transfer project in Thailand. This complete food irradiation technology transfer project included the design and construction of an automatic multipurpose irradiation facility as well as the services of construction and installation management and experts in facility operation, maintenance and training. This paper provides an insight into the many events that led to the succesful conclusion of the world's first complete food irradiation technology transfer project.

Food irradiation: technology transfer in Asia, practical experiences

International Nuclear Information System (INIS)

Kunstadt, P.

1993-01-01

Nordion International Inc., in cooperation with the Thai Office of Atomic Energy for Peace (OAEP) and the Canadian International Development Agency (CIDA) recently completed a unique food irradiation technology transfer project in Thailand. This complete food irradiation technology transfer project included the design and construction of an automatic multipurpose irradiation facility as well as the services of construction and installation management and experts in facility operation, maintenance and training. This paper provides an insight into the many events that led to the successful conclusion of the world's first complete food irradiation technology transfer project. (Author)

Thermal analysis of LEU modified Cintichem target irradiated in TRIGA reactor

International Nuclear Information System (INIS)

Catana, A; Toma, C.

2009-01-01

Actions conceived during last years at international level for conversion of Molybdenum fabrication process from HEU to LEU targets utilization created opportunities for INR to get access to information and participating to international discussions under IAEA auspices. Concrete steps for developing fission Molybdenum technology were facilitated. Institute of Nuclear Research bringing together a number of conditions like suitable irradiation possibilities, direct communication between reactor and hot cell facility, handling capacity of high radioactive sources, and simultaneously the existence of an expanding internal market, decided to undertake the necessary steps in order to produce fission molybdenum. Over the course of last years of efforts in this direction we developed the steps for fission Molybdenum technology development based on modified Cintichem process in accordance with the Argonne National Laboratory proved methodology. Progress made by INR to heat transfer computations of annular target using is presented. An advanced thermal-hydraulic analysis was performed to estimate the heat removal capability for an enriched uranium (LEU) foil annular target irradiated in TRIGA reactor core. As a result, the present analysis provides an upper limit estimate of the LEU-foil and external target surface temperatures during irradiation in TRIGA 14 MW reactor. (authors)

Commercial food irradiation in practice

International Nuclear Information System (INIS)

Leemhorst, J.G.

1990-01-01

Dutch research showed great interest in the potential of food irradiation at an early stage. The positive research results and the potential applications for industry encouraged the Ministry of Agriculture and Fisheries to construct a Pilot Plant for Food Irradiation. In 1967 the Pilot Plant for Food Irradiation in Wageningen came into operation. The objectives of the plant were: research into applications of irradiation technology in the food industry and agricultural industry; testing irradiated products and test marketing; information transfer to the public. (author)

Comparison of normal tissue dose with three-dimensional conformal techniques for breast cancer irradiation including the internal mammary nodes

NARCIS (Netherlands)

van der Laan, Hans Paul; Dolsma, Willemtje; van t Veld, Aart; Bijl, HP; Langendijk, JA

2005-01-01

PURPOSE: To compare the Para Mixed technique for irradiation of the internal mammary nodes (IMN) with three commonly used strategies, by analyzing the dose to the heart and other organs at risk. METHODS AND MATERIALS: Four different three-dimensional conformal dose plans were created for 30 breast

Anindya Chatterjee | IDRC - International Development Research ...

International Development Research Centre (IDRC) Digital Library (Canada)

Dr Anindya Chatterjee is Regional Director, Asia, based in New Delhi, India. He has provided leadership in research, research management, policy, and program development in the area of global health and development. Dr Chatterjee formerly worked internationally with United Nations development agencies, and ...

Research of CITP-II tritium production irradiation device design

International Nuclear Information System (INIS)

Zhang Zhihua; Deng Yongjun; Mi Xiangmiao; Li Rundong; Liu Zhiyong

2012-01-01

As the core component of CITP-II, the online tritium production irradiation device is the pivotal equipment in the research on tritium production and release of tritium breeders. The design of CITP-II online tritium production irradiation device creatively makes replacing the breeders online come true; as tritium production capacity, the self-shielding factor of device, and neutron flux were studied. The influence of different load models and load thicknesses of breeders to tritium production capacity was calculated. The hydrodynamics parameters of device in solid-gas phase were computed. Thermal parameters, such as the heat power of breeders, hotspot, temperature grads distributions, utmost temperature, uneven factors, were analyzed. Creatively designed nonlinear electric heater equalized breeders' even heat power. The influence laws of the components, pressure of gap gas and carrier gas to the balance temperature were got. And the key thermal parameters were ascertained. The key thermal parameters and the changing laws were got and provide the basis for structural optimization and safety analysis. They can also be referenced for the study of breeders' tritium production and release. (authors)

Exhaust gas treatment by electron beam irradiation

International Nuclear Information System (INIS)

Shibamura, Yokichi; Suda, Shoichi; Kobayashi, Toshiki

1991-01-01

Among global environmental problems, atmospheric pollution has been discussed since relatively old days, and various countermeasures have been taken, but recently in connection with acid rain, the efficient and economical treatment technology is demanded. As the denitration and desulfurization technology for the exhaust gas from the combustion of fossil fuel, the incineration of city trash and internal combustion engines, three is the treatment method by electron beam irradiation. By irradiating electron beam to exhaust gas, nitrogen oxides and sulfur oxides are oxidized to nitric acid and sulfuric acid, and by promoting the neutralization of these acids with injected alkali, harmless salts are recovered. This method has the merit that nitrogen oxides and surfur oxides can be removed efficiently with a single system. In this report, as for the exhaust gas treatment by electron beam irradiation, its principle, features, and the present status of research and development are described, and in particular, the research on the recent exhaust gas treatment in city trash incineration is introduced. This treatment method is a dry process, accordingly, waste water disposal is unnecessary. The reaction products are utilized as fertilizer, and waste is not produced. (K.I.)

Acceptance and marketability of the food irradiation technology

International Nuclear Information System (INIS)

Sivinski, J.S.

1985-01-01

The food irradiation technology has been struggling for forty years for acceptance and utilization. The issue of consumer acceptance is addressed and judged not to be the critical factor in terms of priority and timing. The producing/processing marketing industries must first accept the technology for valid business or social reasons. If they become convinced that they cannot afford to pass up the technology, they will accept the process and offer irradiated products. These industries understand public acceptance and use professionals in market development and advertising to achieve consumption of their products. Consumer acceptance can best be developed by the food industry, while the research and development community, in concert with national and international agencies, can and should provide the industry with every assistance in reaching a consensus on the validity of food irradiation as an appropriate and useful technology

ASEAN-Canada Research Partnership | IDRC - International ...

International Development Research Centre (IDRC) Digital Library (Canada)

International Studies at Nanyang Technological University of Singapore will work with the Institute of Asian Research at the University of British Columbia in Vancouver, Canada on a series of joint activities that includes research, capacity building, publishing, and policy forums. Using expertise from both ASEAN countries ...

Relationship between chromosomal aberration of bone marrow cells and dosage of irradiation after 46Sc internal pollution and external low dose X-irradiation in mice

International Nuclear Information System (INIS)

Li Guofu; Li Zhang; Wu Yin

1989-01-01

The relationship between chromosomal aberration of bone marrow cells and dosage in mice 24 h after 46 Sc internal pollution combined with external low dose whole body X-irradiation was quantiatively studied. The results showed that the relationship between chromosomal aberration and dosage was expressed in a linear regression equation. The chromosomal aberration rate was lower in the combined exposure than that of the sum of internal and external exposures, but higher than that of either the internal or external exposure singly. The relationship between chromosomal aberration and time was expressed in the following three phase exponential function: Y(t) = 2.9078 exp 0.27668t + 2.9371 exp -0.0778t + 2.3786 -0.01788t . By means of fit test, there was no significant difference between the determined and the theoretical values. The 90% theoretical values got from all the equations distributed over the determined values

Research on bidding quotation game of international project

Science.gov (United States)

Lin, Tao; Xu, Xin

2017-04-01

Bidding competition of international projects is more and more fierce currently. However, China started late relatively in the field, it is still lack of experience in the aspect of participation in bidding of international projects, and more effective bidding quotation system is not formed till present. Therefore, China can not win through systemic bidding quotation methods compared with many powerful bidding enterprises in the international field. Research on the field is also focused by many aspects as a result. It is urgent to solve related problems. Game theory is combined for analyzing the effectiveness and operability of bidding quotation models mainly based on current situation of bidding market in China international projects during research process in the paper. The research starts with the perspective of bidders for analyzing their game with tenderers and other bidders. The results have operational value aiming at bidders.

Light-ion irradiation experiments in National Research Institute for Metals

International Nuclear Information System (INIS)

Kishimoto, Naoki; Nagakawa, Johsei; Shiraishi, Haruki

1987-01-01

National Research Institute for Metals (NRIM) has primarily focused in the mechanical testings under ion bombardment. (creep, fatigue, and fracture toughness are planned). For the purpose of carrying out those objectives, light ion cyclotron is thought one of the most suitable as an accelerator. NRIM installed AVF-type cyclotron with some modification accomodating to the irradiation testing. From the characteristics of produced particles, NRIM's cyclotron is expected to simulate fusion irradiation environment properly. Irradiation creep experiment was started in 1986. An important and difficult point for the creep measurement is the control of specimen temperature under flucturing beam heating. The problem of this fluctuation was solved by employing forced convection of helium and DC. heating. Fe-25Ni-15Cr and 316 SS have been preliminarily investigated concerning mechanism of the phase stability and the post-helium-implantation creep, etc. Fe-25Ni-15Cr was made into platelets of 0.087 x 2.5 x 20 mm 3 and 316 SS was drawn into wire of 0.8 mm in diameter. Results of preliminary experiments are as follows. For Fe-25Ni-15Cr, 1) Ni of 25 % does not improve creep resistance, 2) Minor element like Ti is important in suppressing the creep, 3) SIPA and PAG model explain the stress dependence of creep qualitatively, and for 316 SS, 4) 0.025 dpa is required to reach steady-state creep, at 2.5 x 10 -7 dpa/s, 300 deg C and 50 MPa, 5) The evolution of irradiation creep is sensitive to the damage rate, particularly in the low dpa range. (Ishimitsu, A.)

Final report on the project research 'stochastic effects of irradiation and risk estimation'

International Nuclear Information System (INIS)

1989-03-01

The title project research was carried out through 1983-1987, by three groups for the studies of radiation carcinogenesis, human genetic effects, and radiotoxicology. 8 reports by the first group, 3 by the second, and 6 by the third group are collected in this issue. The contents are as follows. Serial sacrifice study on tumorigenesis in male C57BL/6J mice exposed to gamma-ray or fast neutron radiation; Influence of biological variables on radiation carcinogenesis; Studies on radiation-induced thymic lymphomagenesis; Modifying factors of radiation induced myeloid leukemia of C3H/He mouse; Cell kinetic studies on radiation induced leukemogenesis; Cytogenetical studies on the mechanism of radiation induced neoplasmas; Molecular biological study on genetic stability of the genome; Protein factors regulating proliferation and differentiation of normal and neoplastic cells; Studies on dose-radiation relationships for induction of chromosome abberations in stem-spermatogonia of three crab-eating monkey after low and high dose rate γ-irradiation; Risk estimation of radiation mutagenesis in man by using cultured mammalian cells; Effects of ionizing radiation on male germ cells of crabeating monkey; Movement and metabolism of radioactive particles in the respiratory tract; Studies on dosimetry for internally deposited alpha-emitters; Comparative toxicological studies on the effects of internal exposures; Studies on treatment of alpha-radioactive wastes; Methodological studies on the inhalation of radioactive aerosols; Removal of transuranic elements by DTPA. (A. Y.)

Guidelines for prediction of irradiation embrittlement of operating WWER-440 reactor pressure vessels

International Nuclear Information System (INIS)

2005-06-01

This TECDOC has been developed under an International Atomic Energy Agency Coordinated Research Project (CRP) entitled Evaluation of Radiation Damage of WWER Reactor Pressure Vessels (RPV) using Database on RPV Materials to develop the guidelines for prediction of radiation damage to WWER-440 PRVs. The WWER-440 RPV was designed by OKB Gidropress, Russian Federation, the general designer. Prediction of irradiation embrittlement of RPV materials is usually done in accordance with relevant codes and standards that are based on the large amounts of information from surveillance and research programmes. The existing Russian code (standard for strength calculations of components and piping in NPPs - PNAE G 7-002-86) for the WWER RPV irradiation embrittlement assessment was approved more than twenty years ago and based mostly on the experimental data obtained in research reactors with accelerated irradiation. Nevertheless, it is still in use and generally consistent with new data. The present publication presents the analyses using all available data required for more precise prediction of radiation embrittlement of WWER-440 RPV materials. Based on the fact that it contains a large amount of data from surveillance programmes as well as research programmes, the IAEA International Database on RPV Materials (IDRPVM) is used for the detailed analysis of irradiation embrittlement of WWER RPV materials. Using IDRPVM, the guideline is developed for assessment of irradiation embrittlement of RPV ferritic materials as a result of degradation during operation. Two approaches, i.e. transition temperatures based on Charpy impact notch toughness, as well as based on static fracture toughness tests, are used in RPV integrity evaluation. The objectives of the TECDOC are the analysis of irradiation embrittlement data for WWER- 440 RPV materials using IDRPVM database, evaluation of predictive formulae depending on chemical composition of the material, neutron fluence, flux, and

IGORR 3: Proceedings of the 3. meeting of the International Group On Research Reactors

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-07-01

Of the Research and development needs identified at IGORR-I and IGORR-II, several topics have been investigated and reported on by members. These results are listed, and were shared through IGORR and through the normal publication routes: Thermal-hydraulic tests and correlations ; Corrosion tests and analytical models; Fuel plate fabrication; Fuel plate stability; Fuel irradiations; Structural materials irradiation tests; Instrumentation upgrading and digital control systems;Man-machine interface. Some of the research issues previously identified still need to be addressed: Multidimensional kinetic analysis for small cores; Burnable poison irradiation tests; Neutron guide irradiation tests; Cold source materials irradiation tests; Cold source liquid nitrogen tests; Cold source liquid hydrogen-H{sub 2}O reaction. Some other R and D needs identified during this workshop are also listed: Accident and safety analysis codes and benchmarks IGORR members will be asked to supply and share information on the methods they use; Thermophysical properties of D{sub 2}0 liquid and vapor (Riso has prepared a report on this, with 150 references, and will publish a heavy water handbook); Chemical and other energy release from core melt ; Fission product release from a molten MTR core; Thermal conductivity of irradiated fuel meat; Tests of cryogenic circulators for single-phase forced convection cold source; Flow blockage tests.

IGORR 3: Proceedings of the 3. meeting of the International Group On Research Reactors

International Nuclear Information System (INIS)

1993-01-01

Of the Research and development needs identified at IGORR-I and IGORR-II, several topics have been investigated and reported on by members. These results are listed, and were shared through IGORR and through the normal publication routes: Thermal-hydraulic tests and correlations ; Corrosion tests and analytical models; Fuel plate fabrication; Fuel plate stability; Fuel irradiations; Structural materials irradiation tests; Instrumentation upgrading and digital control systems;Man-machine interface. Some of the research issues previously identified still need to be addressed: Multidimensional kinetic analysis for small cores; Burnable poison irradiation tests; Neutron guide irradiation tests; Cold source materials irradiation tests; Cold source liquid nitrogen tests; Cold source liquid hydrogen-H 2 O reaction. Some other R and D needs identified during this workshop are also listed: Accident and safety analysis codes and benchmarks IGORR members will be asked to supply and share information on the methods they use; Thermophysical properties of D 2 0 liquid and vapor (Riso has prepared a report on this, with 150 references, and will publish a heavy water handbook); Chemical and other energy release from core melt ; Fission product release from a molten MTR core; Thermal conductivity of irradiated fuel meat; Tests of cryogenic circulators for single-phase forced convection cold source; Flow blockage tests

Research and design of the moving system for the cobalt-60 industrial irradiator VINAGA2

International Nuclear Information System (INIS)

Le Minh Tuan; Tran Khac An; Nguyen Ngoc Phuong; Tran Van Hung; Cao Van Chung; Phan Phuoc Thang; Ha Thanh Viet; Nguyen Thanh Cuong; Nguyen Duc Hoa

2017-01-01

On the way of localization of Cobalt-60 industrial irradiators, Research and Development Center for Radiation Technology (VINAGAMMA) has successfully designed and manufactured the first version of Co-60 industrial irradiator, VINAGA1. The second version of Co-60 industrial irradiator has been studied and designed by VINAGAMMA in the frame of the scientific project No. DTCB.02/15/TTNCTK. The main system of a Co-60 industrial irradiator is a mechanical system inside an irradiation room namely a tote box moving system. This report presents the tote box moving system of VINAGA2 designed by VINAGAMMA. The tote box moving system contains 52 tote boxes with the dimensions of 50 cm (w) × 70 cm (l) × 150 cm (h) that are moving around the source racks in the manner of 4 passes and 2 levels. The irradiator VINAGA2 with this tote box moving system has good specifications: The minimum time of an irradiation cycle is 1 h 20 min. and the dose uniformity ratio (DUR) at the product densities of 0.1 g/cm 3 and 0.5 g/cm 3 is 1.4 and 1.8, respectively. Radiation energy utilization efficiency at the product densities of 0.1 g/cm 3 and 0.5 g/cm 3 is 19.7% and 48.8%, respectively. These specifications meet the requirements for a multi-purpose Co-60 industrial irradiator and the present irradiation requirements in Vietnam. (author)

International Entrepreneurship - A New Concept and its Research Agenda

DEFF Research Database (Denmark)

Christensen, Poul Rind

2003-01-01

In this article the research agenda of International Entrepreneurship is analysed. The agenda is defined; major contributions are revealed. Based on critical analyses the research agenda is redefined and a future perspective for research is suggested.......In this article the research agenda of International Entrepreneurship is analysed. The agenda is defined; major contributions are revealed. Based on critical analyses the research agenda is redefined and a future perspective for research is suggested....

[Basic research in ophthalmology in Germany and its international context].

Science.gov (United States)

Schlötzer-Schrehardt, U; Cursiefen, C

2017-09-01

Experimental basic research provides the foundations for the elucidation of pathophysiological mechanisms of diseases and the development of novel diagnostic and therapeutic strategies for ophthalmological diseases. The objective of this contribution is to provide an overview of the international interconnection of basic research in ophthalmology in Germany. The international context of ophthalmological research conducted in Germany is presented by means of personal experiences and data published by the German Ophthalmological Society (DOG), the German Research Foundation (DFG) and the European Union (EU). Due to the lack of organized databases this article lays no claim to completeness. Basic research in ophthalmology in Germany is mainly conducted in university eye departments and is mainly related to the etiology, pathophysiology and therapy development for various ophthalmic diseases. It is primarily funded by the DFG, the Federal Ministry of Education and Research (BMBF) and the EU plays an increasingly important role. Thus, ophthalmological research is integrated into numerous European research networks and beyond that into many international interconnections and relationships. In Germany, both clinical and basic research in ophthalmology is integrated into many international networks and is only functionally viable in an international context; however, given the increasing impact of ophthalmological research in Asian countries, future strategies require a continued focus on career development, research infrastructure, working environment and international cooperation.

Development and Establishment of Detection Method of Irradiated Foods

International Nuclear Information System (INIS)

Byun, Myung Woo; Lee, Ju Woon; Kim, Dong Ho; Jo, Cheo Run; Kim, Jang Ho; Kim, Kyong Su

2004-12-01

The present project was related to the development and establishment of the detection techniques for the safety management of gamma-irradiated food and particularly conducted for the establishment of standard detection method for gamma-irradiated dried spices and raw materials, dried meat and fish powder for processed foods, bean paste powder, red pepper paste powder, soy sauce powder, and starch for flavoring ingredients described in 3, 6, 7 section of Korean Food Standard. Since the approvement of gamma-irradiated food items will be enlarged due to the international tendency for gamma-irradiated food, it was concluded that the establishment of detailed detection methods for each food group is not efficient for the enactment and enforcement of related regulations. For this reason, in order to establish the standard detection method, a detection system for gamma-irradiated food suitable for domestic operation was studied using comparative analysis of domestic and foreign research data classified by items and methods and European Standard as a reference. According to the comparative analyses of domestic and foreign research data and regulations of detection for gamma-irradiated food, it was concluded to be desirable that the optimal detection method should be decided after principal detection tests such as physical, chemical, and biological detection methods are established as standard methods and that the specific descriptions such as pre-treatment of raw materials, test methods, and the evaluation of results should be separately prescribed

Development and Establishment of Detection Method of Irradiated Foods

Energy Technology Data Exchange (ETDEWEB)

Byun, Myung Woo; Lee, Ju Woon; Kim, Dong Ho; Jo, Cheo Run; Kim, Jang Ho; Kim, Kyong Su

2004-12-15

The present project was related to the development and establishment of the detection techniques for the safety management of gamma-irradiated food and particularly conducted for the establishment of standard detection method for gamma-irradiated dried spices and raw materials, dried meat and fish powder for processed foods, bean paste powder, red pepper paste powder, soy sauce powder, and starch for flavoring ingredients described in 3, 6, 7 section of Korean Food Standard. Since the approvement of gamma-irradiated food items will be enlarged due to the international tendency for gamma-irradiated food, it was concluded that the establishment of detailed detection methods for each food group is not efficient for the enactment and enforcement of related regulations. For this reason, in order to establish the standard detection method, a detection system for gamma-irradiated food suitable for domestic operation was studied using comparative analysis of domestic and foreign research data classified by items and methods and European Standard as a reference. According to the comparative analyses of domestic and foreign research data and regulations of detection for gamma-irradiated food, it was concluded to be desirable that the optimal detection method should be decided after principal detection tests such as physical, chemical, and biological detection methods are established as standard methods and that the specific descriptions such as pre-treatment of raw materials, test methods, and the evaluation of results should be separately prescribed.

Influence of ion irradiation on internal residual stress in DLC films

Energy Technology Data Exchange (ETDEWEB)

Karaseov, Platon A., E-mail: platon.karaseov@rphf.spbstu.r [St. Petersburg State Polytechnic University, Polytechnicheskaya St. 29, 195251 St. Petersburg (Russian Federation); Podsvirov, Oleg A.; Karabeshkin, Konstantin V. [St. Petersburg State Polytechnic University, Polytechnicheskaya St. 29, 195251 St. Petersburg (Russian Federation); Vinogradov, Andrei Ya. [Ioffe Physicotechnical Institute RAS, Polytechnicheskaya 26, 195252 St. Petersburg (Russian Federation); Azarov, Alexander Yu. [St. Petersburg State Polytechnic University, Polytechnicheskaya St. 29, 195251 St. Petersburg (Russian Federation); Karasev, Nikita N. [State University of Information Technologies, Mechanics and Optics, Sablinskaya Str. 14, 197101 St. Petersburg (Russian Federation); Titov, Andrei I.; Smirnov, Alexander S. [St. Petersburg State Polytechnic University, Polytechnicheskaya St. 29, 195251 St. Petersburg (Russian Federation)

2010-10-01

The dependence of internal residual stress in thin diamond-like carbon films grown on Si substrate by PECVD technique on most important growth parameters, namely RF-power, DC bias voltage and substrate temperature, is described. Results show that compressive stress reaches the highest value of 2.7 GPa at low RF-power and DC bias. Increase of substrate temperature from 250 to 350 {sup o}C leads to nonlinear increase of stress value. Inhomogeneity of residual stress along the film surface disappears when film is deposited at temperatures above 275 {sup o}C. Post-growth film irradiation by P{sup +} and In{sup +} ions cause decrease of compressive stress followed by its inversion to tensile. For all ion energy combinations used residual stress changes linearly with normalized fluence up to 0.2 DPA with slope (8.7 {+-} 1.3) GPa/DPA.

Can the sentinel lymph node technique affect decisions to offer internal mammary chain irradiation?

International Nuclear Information System (INIS)

Bourre, Jean-Cyril; Payan, Raoul; Collomb, Delphine; Gallazzini-Crepin, Celine; Calizzano, Alex; Desruet, Marie-Dominique; Pasquier, Dominique; Bolla, Michel; Fagret, Daniel; Vuillez, Jean-Philippe

2009-01-01

Identification of the sentinel lymph node (SLN) for small mammary tumours (cT1N0) sometimes leads to detection of internal mammary chain (IMC) drainage. This information is often ignored by physicians. The present study sought to determine the frequency with which an internal mammary SLN was identified by peritumoral injection of radioactive tracer, and then to determine the patients in whom identification of an internal mammary SLN could have an impact on the radiation treatment plan. Between March 2002 and March 2008, 622 SLN biopsies performed in a cohort of 608 patients were analysed. Technetium-labelled nanocolloids were administered via three peritumoral injections, completed by a deep prepectoral injection, with the entire procedure performed under echographic guidance. The SLN was identified in 607 of the 622 patients, including 174 (28.7%) in the IMC. A total of 161 successful internal mammary biopsies were performed. Of the 622 patients, 18 showed SLN involvement in the IMC. In 7 of these patients, only the internal mammary SLN was affected. Prophylactic irradiation of the IMC was indicated in 376 patients, but only in 18 (4.8%) of these patients was there effectively IMC involvement; internal mammary SLN biopsy failed in 7 patients (1.9%). SLN detection by peritumoral injection, combined with the systematic removal of the internal mammary SLN, enabled the involvement of this region to be found in a nonnegligible number of patients. Such information should make it possible to personalize treatment for patients with stage cT1 mammary cancer and thereby avoid needless internal mammary radiation therapy in a large number of patients (93.4% in our study). (orig.)

The effects of radiations on materials for core internals of PWRs: EDF-CEA-Framatome joint research programme

International Nuclear Information System (INIS)

Mathan, N. de; Buisine, D.; Goltrant, O.; Dubuisson, P.; Scott, P.; Deydier, D.; Trenty, A.

1998-01-01

The effects of neutron irradiation on materials for the core internals of PWRs (austenitic stainless steels) are potentially a significant economic and regulatory concern for EDF. The maintenance strategy for EDF relies primarily on in-service inspection, safety analysis and characterization of materials irradiated in-service. In addition, to anticipate likely future behaviour of highly irradiated materials, EDF has initiated, in collaboration with CEA and Framatome, a large R and D programme designed to (i) evaluate the effects of neutron irradiation on mechanical properties and stress corrosion cracking sensitivity (IASCC), and (ii) identify possible replacement materials. The programme, currently in progress, involves mechanical tests (tensile, fracture toughness, irradiation creep), stress corrosion cracking tests (in flux and out of flux) and metallurgical examinations. The test materials are being irradiated in several experimental reactors in France and Russia up to PWR-related end of life doses (∼ 80 dpa) at several PWR-relevant irradiation temperatures (300-400 deg. C). The presentation will describe the objectives and early results of this ongoing R and D programme. (author)

Barriers and Solutions to Conducting Large International, Interdisciplinary Research Projects

Science.gov (United States)

Pischke, Erin C.; Knowlton, Jessie L.; Phifer, Colin C.; Gutierrez Lopez, Jose; Propato, Tamara S.; Eastmond, Amarella; de Souza, Tatiana Martins; Kuhlberg, Mark; Picasso Risso, Valentin; Veron, Santiago R.; Garcia, Carlos; Chiappe, Marta; Halvorsen, Kathleen E.

2017-12-01

Global environmental problems such as climate change are not bounded by national borders or scientific disciplines, and therefore require international, interdisciplinary teamwork to develop understandings of their causes and solutions. Interdisciplinary scientific work is difficult enough, but these challenges are often magnified when teams also work across national boundaries. The literature on the challenges of interdisciplinary research is extensive. However, research on international, interdisciplinary teams is nearly non-existent. Our objective is to fill this gap by reporting on results from a study of a large interdisciplinary, international National Science Foundation Partnerships for International Research and Education (NSF-PIRE) research project across the Americas. We administered a structured questionnaire to team members about challenges they faced while working together across disciplines and outside of their home countries in Argentina, Brazil, and Mexico. Analysis of the responses indicated five major types of barriers to conducting interdisciplinary, international research: integration, language, fieldwork logistics, personnel and relationships, and time commitment. We discuss the causes and recommended solutions to the most common barriers. Our findings can help other interdisciplinary, international research teams anticipate challenges, and develop effective solutions to minimize the negative impacts of these barriers to their research.

Barriers and Solutions to Conducting Large International, Interdisciplinary Research Projects.

Science.gov (United States)

Pischke, Erin C; Knowlton, Jessie L; Phifer, Colin C; Gutierrez Lopez, Jose; Propato, Tamara S; Eastmond, Amarella; de Souza, Tatiana Martins; Kuhlberg, Mark; Picasso Risso, Valentin; Veron, Santiago R; Garcia, Carlos; Chiappe, Marta; Halvorsen, Kathleen E

2017-12-01

Global environmental problems such as climate change are not bounded by national borders or scientific disciplines, and therefore require international, interdisciplinary teamwork to develop understandings of their causes and solutions. Interdisciplinary scientific work is difficult enough, but these challenges are often magnified when teams also work across national boundaries. The literature on the challenges of interdisciplinary research is extensive. However, research on international, interdisciplinary teams is nearly non-existent. Our objective is to fill this gap by reporting on results from a study of a large interdisciplinary, international National Science Foundation Partnerships for International Research and Education (NSF-PIRE) research project across the Americas. We administered a structured questionnaire to team members about challenges they faced while working together across disciplines and outside of their home countries in Argentina, Brazil, and Mexico. Analysis of the responses indicated five major types of barriers to conducting interdisciplinary, international research: integration, language, fieldwork logistics, personnel and relationships, and time commitment. We discuss the causes and recommended solutions to the most common barriers. Our findings can help other interdisciplinary, international research teams anticipate challenges, and develop effective solutions to minimize the negative impacts of these barriers to their research.

The basis and safety of food irradiation. Advantages of radiation treatment for food sanitation and storage

Energy Technology Data Exchange (ETDEWEB)

Ito, Hitoshi [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment

2001-09-01

The food irradiation has the history of more than 60 years in its development. However, its commercial application has not been promoted well in Japan even though the safety of irradiated foods was confirmed. Recently, relevant authorities in 52 countries have given clearance to many commodities, and irradiated foods are commercially distributed in USA and EU countries. The international situation makes some unavoidable circumstances which can not close the commercialization of food irradiation in Japan. The present report contains the basis and application of food irradiation, and history of development in the World and Japan. Moreover, the safety of irradiated foods are demonstrated from many evidences of researches in animal feeding tests, in analysis of radiolytic products, in nutritional evaluations and in microbiological studies of irradiated foods. Especially, it makes obvious from the results of many researches that unique radiolytic products can not be produced by irradiation of foods. Because main radiation effects are induced by oxidation degradation of food components as similar to natural oxidation by heating or UV light. Radiation engineering for commercial process and identification methods of irradiated foods are also presented. (author)

Quality evaluation of garlic irradiated in Argentine and stored in Brazil

International Nuclear Information System (INIS)

Curzio, Osvaldo A.; Croci, Clara A.; Domarco, Rachel E.; Spoto, Marta H.F.; Blumer, Lucimara; Walder, Julio M.M.

1997-01-01

This work was undertaken to evaluate the quality of garlic Colorado, irradiated in Argentina and stored for long period of time under environmental conditions in Brazil. Two samples of 100 kg each were selected from high quality garlic harvested in December/1995 from a region close to the Universidad Nacional del Sur. At 30 days after harvesting one of the samples were irradiated with a dose of 60 Gy. Both samples, irradiated and non irradiated, were transported by road from the Laboratorio de Radioisotopos of the Universidad Nacional del Sur, Bahia Blanca, Argentina, to the Centro de Energia Nuclear na Agriculture (CENA-USP), Piracicaba, Sao Paulo, Brazil. The effects of irradiation on weigh loss , discard, germination and sensorial analysis were nonthly observed on CENA among 30and 180 days of storage. The evaluation of germination evidences the benefits of the radioinhibition process. The irradiated bulbs did not exhibit any intern bud, however the non-irradiated bulbs exhibit any intern bud, however the non-irradiated bulbs exhibit any intern bud, however the non-irradiated bulbs exhibit 100% of germination on the period of storage. At the end of the period of storage, the weigh loss of the irradiated garlic was smaller than the non-irradiate one. The percentage of discard, evaluated as intern germination, scatying and whitering, was 43% on the irradiated sample. The analysis of sensorial parameters shows no difference between irradiated and non-irradiated garlic, so irradaition did not affect the sensorial quality of the product. (author). 12 refs., 8 tabs

Food irradiation: Some regulatory and technical aspects

International Nuclear Information System (INIS)

1985-10-01

An Advisory Group by IAEA and FAO on Regulatory and Technological Requirements for Authorization of the Food Irradiation Process was held at IAEA Headquarters in Vienna from 5 to 9 November 1984. The task of the Advisory Group was to advise on the scientific and technological considerations affecting the implementation of the food irradiation process, with particular reference to the facilitation of international trade in irradiated foods and to develop guidance on how the various provisions of the Codex General Standard on Irradiated Foods could be incorporated into national legislation in order to facilitate international trade and avoid the occurence of trade barriers. Separate abstracts were prepared for the various presentations at this meeting

Calculation of dose rate in escape channel of Research Irradiating Facility Army Technology Center using code MCNPX

International Nuclear Information System (INIS)

Gomes, Renato G.; Rebello, Wilson F.; Vellozo, Sergio O.; Moreira Junior, Luis; Vital, Helio C.; Rusin, Tiago; Silva, Ademir X.

2013-01-01

In order to evaluate new lines of research in the area of irradiation of materials external to the research irradiating facility Army Technology Center (CTEx), it is necessary to study security parameters and magnitude of the dose rates from their channels of escape. The objective was to calculate, with the code MCNPX, dose rates (Gy / min) on the interior and exterior of the four-channel leakage gamma irradiator. The channels were designed to leak radiation on materials properly disposed in the area outside the irradiator larger than the expected volume of irradiation chambers (50 liters). This study aims to assess the magnitude of dose rates within the channels, as well as calculate the angle of beam output range outside the channel for analysis as to its spread, and evaluation of safe conditions of their operators (protection radiological). The computer simulation was performed by distributing virtual dosimeter ferrous sulfate (Fricke) in the longitudinal axis of the vertical drain channels (anterior and posterior) and horizontal (top and bottom). The results showed a collimating the beams irradiated on each of the channels to the outside, with values of the order of tenths of Gy / min as compared to the maximum amount of operation of the irradiator chamber (33 Gy / min). The external beam irradiation in two vertical channels showed a distribution shaped 'trunk pyramid', not collimated, so scattered, opening angle 83 ° in the longitudinal direction and 88 in the transverse direction. Thus, the cases allowed the evaluation of materials for irradiation outside the radiator in terms of the magnitude of the dose rates and positioning of materials, and still be able to take the necessary care in mounting shield for radiation protection by operators, avoiding exposure to ionizing radiation. (author)

International Journal of Medicine and Biomedical Research

African Journals Online (AJOL)

The International Journal of Medicine and Biomedical Research (IJMBR) is a peer-reviewed ... useful to researchers in all aspects of Clinical and Basic Medical Sciences including Anatomical Sciences, Biochemistry, Dentistry, Genetics, ...

A strategy for building public service motivation research Internationally

NARCIS (Netherlands)

Kim, S.; Vandenabeele, W.V.

2010-01-01

As public service motivation research grows qualitatively and quantitatively, some scholars question its appropriateness for international applications. This essay sets out a strategy of convergence for international research and measurement approaches. Studies that assess commonalities in public

Gamma Irradiation does not Cause Carcinogenesis of Irradiated Herbs

International Nuclear Information System (INIS)

Thongphasuk, Jarunee; Thongphasuk, Piyanuch; Eamsiri, Jarurut; Pongpat, Suchada

2009-07-01

Full text: Microbial contamination of medicinal herbs can be effectively reduced by gamma irradiation. Since irradiation may cause carcinogenicity of the irradiated herbs, the objective of this research is to study the effect of gamma irradiation (10 and 25 kGy) from cobalt-60 on carcinogenicity. The herbs studied were Pueraria candollei Grah., Curcuma longa Linn. Zingiber montanum, Senna alexandrina P. Miller, Eurycoma Longifolia Jack, Gymnostema pentaphylum Makino, Ginkgo biloba, Houttuynia cordata T., Andrographis paniculata, Thunbergia laurifolia L., Garcinia atroviridis G., and Cinnamomum verum J.S.Presl. The results showed that gamma irradiation at the dose of 10 and 25 kGy did not cause carcinogenicity of the irradiated herbs

Energy research, national and international

International Nuclear Information System (INIS)

Rhijn, A.A.T. van

1976-01-01

The Dutch Energy Research Programme inaugurated by the National Steering Group for Energy Research (LSEO) is discussed. Three types of criteria to be borne in mind in the selection of new directions in development are considered: the setting of targets for energy policy: the general central social and economic aims of the country; and the scientific, financial and organisational possibilities. International aspects are reviewed with reference to the IEA, CERN, Euratom, ELDO and ESRO. (D.J.B.)

European research and the Hungarian school of food irradiation

Science.gov (United States)

Lakner, Zoltán; Soós, Sándor; Vida, Zsófia; Farkas, Csilla

2016-12-01

In second half of the 20th century the research of application of irradiation to food preservation become a new and prospective field of food science and technology. This activity has been supported and developed in a parallel way in both halves of the that-time world, divided by the iron-curtain. Under these conditions, fulfilling a specific "bridge-role", some highly innovative scientists, first of all Professor József Farkas has been able to achieve considerable results in this new field of science. Based on citation analysis and science mapping it can be proven, that his path-breaking research has been exercise a fertilising effect on development of a wide range of fields of science, and considerably contributed to proliferation of this science and technology in numerous countries of the world.

Issues in food irradiation

International Nuclear Information System (INIS)

Mills, S.

1987-04-01

This discussion paper has two goals: first, to raise public awareness of food irradiation, an emerging technology in which Canada has the potential to build a new industry, mainly oriented to promising overseas markets; and second, to help build consensus among government and private sector decision makers about what has to be done to realize the domestic and export potential. The following pages discuss the potential of food irradiation; indicate how food is irradiated; outline the uses of food irradiation; examine questions of the safety of the equipment and both the safety and nutritional value of irradiated food; look at international commercial developments; assess the current and emerging domestic scene; and finally, draw some conclusions and offer suggestions for action

low temperature irradiation effects in iron-alloys and ceramics

International Nuclear Information System (INIS)

Kuramoto, Eiichi; Abe, Hironobu; Tanaka, Minoru; Nishi, Kazuya; Tomiyama, Noriyuki.

1991-01-01

Electron beam irradiation at 77K and neutron irradiation at 20K were carried out on Fe-Cr and Fe-Cr-Ni alloys and ZnO and graphite system ceramics, and by measuring positron annihilation lifetime, the micro-information about irradiation-introduced defects was obtained. The temperature of the movement of atomic vacancies in pure iron is about 200K, but it was clarified that by the addition of Cr, it was not much affected. However, in the case of high concentration Cr alloys, the number of atomic vacancies which take part in the formation of micro-voids decreased as compared with the case of pure iron. It is considered that among the irradiation defects of ZnO, O-vac. restored below 300degC. It is considered that in the samples without irradiation, the stage of restoration exists around 550degC, which copes with structural defects. By the measurement of graphite without irradiation, the positron annihilation lifetime corresponding with the interface of matrix and crystal grains, grain boundaries and internal surfaces was almost determined. The materials taken up most actively in the research and development of nuclear fusion reactor materials are austenitic and ferritic stainless steels, and their irradiation defects have been studied. (K.I.)

View all initiatives | IDRC - International Development Research ...

International Development Research Centre (IDRC) Digital Library (Canada)

The International Research Chairs Initiative pairs top research talent from universities in Canada with their counterparts in developing countries to address key development challenges. We fund researchers driving global change. Careers · Contact Us · Subscribe · Unsubscribe · Site map. Follow us; Facebook · Twitter ...

International Research Results and Accomplishments From the International Space Station - A New Compilation

Science.gov (United States)

Ruttley, Tara; Robinson, Julie A.; Tate-Brown, Judy; Perkins, Nekisha; Cohen, Luchino; Marcil, Isabelle; Heppener, Marc; Hatton, Jason; Tasaki, Kazuyuki; Umemura, Sayaka;

New developments in food irradiation

International Nuclear Information System (INIS)

Molins, R.

1996-01-01

Food irradiation technology is rapidly gaining worldwide acceptance as a promising tool to help alleviate some important food security and safety concerns, and to facilitate the international trade in food. Because of the different priorities that these issues receive in various countries, food irradiation is being considered by developing countries as the technology of choice over chemical fumigants in applications related to the reduction of food losses such as the insect disinfestation of stored staple and export commodities and the inhibition of sprouting of bulb and tuber crops. In contrast, the use of irradiation as a 'cold pasteurization' method to improve the hygienic quality and safety of foods is emerging as the primary field of application in developed countries. Moreover, the use of irradiation as an alternative, non-chemical quarantine treatment for fresh fruits, vegetables and other agricultural commodities entering international trade will no doubt benefit exporting as well as importing countries. 4 figs

International research centre launched

International Nuclear Information System (INIS)

1965-01-01

Full text: The first scientific research and educational institution to be set up on a completely international basis was officially inaugurated in Trieste on 5 October 1964 by the Director General of IAEA, Dr. Sigvard Eklund, when he opened the first seminar of the International Centre for Theoretical Physics. As evidence of the international nature of the institution he noted that the scientists who would work and teach there during the first year represented sixteen different countries. By the end of 1964, the Centre building was nearing completion and three of the five floors were occupied. A successful symposium had been held on the subject of plasma physics, and a score of professors and fellows were at work, from Bulgaria, Czechoslovakia, Greece, India, Japan, Jordan, the Netherlands, Norway, Pakistan, Poland, the United Kingdom, and the United States. A dozen scientific papers had been issued as preprints. The main purpose of the Centre is to foster the advancement of theoretical physics through training and research; at first the chief subject will be high-energy and elementary particle physics. Plasma physics, low energy physics and solid-state physics will also be dealt with. Special attention is paid to the needs of the developing countries. Of the 25 fellows selected for the academic year 1964-65, more than half are from South America, Africa and Asia. In conjunction with the Research Centre, there is an Advanced School for theoretical Physics to provide graduate training for fellows who need such preparation before they embark upon research. The Centre works under the guidance of a Scientific Council comprising the president, Prof. M. Sandoval-Vallarta (Nuclear Energy Commission of Mexico); Prof. A. Abragam (Saclay, France); Prof. R. Oppenheimer (Institute for Advanced Study, Princeton, USA); Dr. V. Soloviev (Dubna, USSR); Prof V.F. Weiskopf (Director General, CERN) ; Prof Abdus Salam (Imperial College, London) ; Prof. P. Budini (University of Trieste

JNC-JAERI united research report. A study on degradation of structural materials under irradiation environment in nuclear reactors

International Nuclear Information System (INIS)

Hoshiya, Taiji; Takaya, Shigeru; Nagae, Yuji; Aoto, Kazumi; Abe, Yasuhiro; Nakamura, Yasuo; Ueno, Fumiyoshi; Nemoto, Yoshiyuki; Miwa, Yukio; Tsukada, Takashi; Ohmi, Masao; Saito, Junichi; Shimizu, Michio

2004-10-01

Japan Nuclear Cycle Development Institute (JNC) and Japan Atomic Energy Research Institute (JAERI) have started a JNC-JAERI united research program cooperatively in fiscal year 2003, which has been aimed for efficient progress and synergistic effect on the research activities of both Institutes in order to lead the facing task of unification between JNC and JAERI. This study has been chosen one of the united research themes because it has been common objective for both Institutes in the research field of structural materials such as Fast Breeder Reactor and Light Water Reactors components. The purpose of the study is to clarify damage mechanism of structural materials under irradiation, and then to develop the methods for damage evaluation and detection in earlier stage of progressing process of damage along grain boundaries. In fiscal year 2003, magnetic flux density distribution (JNC) and micro-corrosion (JAERI) measurement apparatus were newly developed and equipped in Hot Facilities in two Institutes, respectively. The former apparatus, supersensitive Flux Gate sensor was installed, could detector leaked magnetic flux from material damaged by neutron irradiation. The latter one, Atomic Force Microscope was installed, could detect grain boundary corrosion loss after an electrochemical corrosion test of irradiated material. These apparatus were designed and produced in consideration of radiation resistance and remote-controlled operation to equip in hot cells. As the results of preliminary studies using Ni ion irradiated specimen, damage detection by corrosion property in grain boundary was possible but magnetic property change could not detect. We will start the study on neutron irradiation damage by employing the two apparatus as the next step. (author)

Development of an irradiation system for a small size continuous run multipurpose gamma irradiator

International Nuclear Information System (INIS)

Calvo, W.A.P.; Rela, P.R.; Napolitano, C.M.; Kodama, Y.; Omi, N.M.; Costa, F.E. da; Andradee Silva, L.G. de

2009-01-01

The Radiation Technology Center from IPEN-CNEN/SP, Brazil, developed a revolutionary design and national technology, a small-sized continuous run and multipurpose industrial gamma irradiator, to be used as a demonstration facility for manufacturers and contract service companies, which need economical and logistical in-house irradiation system alternatives. Also, to be useful for supporting the local scientific community on development of products and process using gamma radiation, assisting the traditional and potential users on process validation, training and qualification of operators and radioprotection officers. The developed technology for this facility consists of a continuous tote box transport system, comprising a single concrete vault, where the automated transport system of products inside and outside of the irradiator utilizes a rotating door, integrated with the shielding, avoiding the traditional maze configuration. Covering 76 m 2 of floor area, the irradiator design is a product overlap sources and the maximum capacity of cobalt-60 wet sources is 37 PBq. The performed qualification program of this multipurpose irradiator was based on AAMI/ISO 11137 standard, which recommends the inclusion of the following elements: installation and process qualification. The initial load of the multipurpose irradiator was 3.4 PBq with 13 cobalt-60 sources model C-188, supplied by MDS Nordion - Canada. For irradiator dose optimization, the source distribution was done using the software Cadgamma developed by IPEN-CNEN/SP. The polymethylmetacrylate (PMMA) dosimeter system, certified by the International Dose Assurance Service (IDAS) of the International Atomic Energy Agency (IAEA) was used for irradiator dose mapping. The economic analysis, performance concerning with dose uniformity and cobalt-60 utilization efficiency were calculated and compared with other commercial gamma irradiators available on the market. (authors)

International collaboration between nuclear research centres and the role of research reactors

International Nuclear Information System (INIS)

Dodd, B.

2001-01-01

A research reactor is a core facility in many nuclear research centres (NRCs) of Member States and it is logical that it should be the focus of any international collaboration between such centres. There are several large and sophisticated research reactors in operation in both developed and developing Member States, such as Belgium, China, Egypt, France, Hungary, Indonesia, India, Japan, ROK, Netherlands, South Africa and the USA. There are also several new, large reactors under construction or being planned such as those in Australia, Canada, China, France, Germany, and Thailand. It is felt that the utilization of these reactors can be enhanced by international co-operation to achieve common goals in research and applications. (author)

Publications | Page 25 | IDRC - International Development Research ...

International Development Research Centre (IDRC) Digital Library (Canada)

Results 241 - 250 of 6341 ... Journal articles. Papers. Reports. Research in Action. Studies ... Half a year later, on. ... Over the past two decades, the International Development Research Centre (IDRC) has established and subsequently devolved ...

Research Award: Risk Management and Internal Audit (RMIA ...

International Development Research Centre (IDRC) Digital Library (Canada)

Jean-Claude Dumais

2012-09-12

Sep 12, 2012 ... Research Award: Risk Management and Internal Audit (RMIA). Deadline: 12 ... management, internal control, and governance processes. ... identifying competencies, key success factors or performance indicators most critical.

Food irradiation for phytosanitary and quarantine treatment

Science.gov (United States)

Irradiation at doses less than 1 kGy is an effective phytosanitary measure with minimal adverse effects on the quality of most fresh produce. There are internationally recognized guidelines for the use of irradiation as a phytosanitary measure and for the conduct of trade in irradiated fresh produce...

Assessment of necessary regularity of internal irradiation monitoring on the basis of direct and indirect methods of dosimetry

International Nuclear Information System (INIS)

Malykhin, V.M.; Ivanova, N.I.

1981-01-01

It is shown that when assessing the necessary periodicity of internal irradiation monitoring, it is required to take account of the nature (rhythm) of radionuclide intake to the organism during the monitoring period, the effective period of radionuclide biological half-life, its activity in the organism, sensitivity of the technique applied and the labour-consumig character of the monitoring method [ru

Currently developing opportunities in food irradiation and modern irradiation facilities

International Nuclear Information System (INIS)

Wanke, R.

1997-01-01

I. Factor currently influencing advancing opportunities for food irradiation include: heightened incidence and awareness of food borne illnesses and causes. Concerns about ensuring food safety in international as well as domestic trade. Regulatory actions regarding commonly used fumigants/pesticides e.g. Me Br. II. Modern irradiator design: the SteriGenics M ini Cell . A new design for new opportunities. Faster installation of facility. Operationally and space efficient. Provides local o nsite control . Red meat: a currently developing opportunity. (Author)

Going global: Trust research and international relations

DEFF Research Database (Denmark)

Ruzicka, Jan; Keating, Vincent Charles

2015-01-01

In this review article we explore the growing body of literature on the subject of trust in the field of international relations. We argue that the international level represents a unique challenge for trust research. This is so because some of the most pressing problems facing the world today...

NREL Research Takes Off for International Space Station | News | NREL

Science.gov (United States)

hydrogen. Research has proven that nitrate starvation triggers C. vulgaris to go into lipid production mode NREL Research Takes Off for International Space Station NREL Research Takes Off for International the other, Chlorella vulgaris, will make lipids. NREL research dating back to the late 1970s opened

Guidelines for acceptance of food irradiation

International Nuclear Information System (INIS)

1987-09-01

The purpose of the meeting was to develop an action plan which can be applied in countries with varying philosophies towards food irradiation, but which would help foster a common international attitude to what is undoubtedly a controversial issue. Basic recommendations were to: Identify target groups which influence policy in regard to food irradiation; Establish a cohesive marketing strategy with flexibility to meet varied national needs; Implement an ongoing communications system designed to reach and inform decision-makers; Work in each country through an information ''chain'' commencing with irradiation processors; Promote to - and through - the food industry as potentially the greatest beneficiaries; Set up an administrative ''Clearing House'' in each country to co-ordinate promotion efforts; Assemble ''Seeding Groups'' who will contact and communicate with other organizations; Aim for common international branding and packaging identification for irradiated foods

Food irradiation

International Nuclear Information System (INIS)

Migdal, W.

1995-01-01

A worldwide standard on food irradiation was adopted in 1983 by codex Alimentarius Commission of the Joint Food Standard Programme of the Food and Agriculture Organization (FAO) of the United Nations and The World Health Organization (WHO). As a result, 41 countries have approved the use of irradiation for treating one or more food items and the number is increasing. Generally, irradiation is used to: food loses, food spoilage, disinfestation, safety and hygiene. The number of countries which use irradiation for processing food for commercial purposes has been increasing steadily from 19 in 1987 to 33 today. In the frames of the national programme on the application of irradiation for food preservation and hygienization an experimental plant for electron beam processing has been established in Inst. of Nuclear Chemistry and Technology. The plant is equipped with a small research accelerator Pilot (19 MeV, 1 kW) and industrial unit Electronika (10 MeV, 10 kW). On the basis of the research there were performed at different scientific institutions in Poland, health authorities have issued permissions for irradiation for; spices, garlic, onions, mushrooms, potatoes, dry mushrooms and vegetables. (author)