WorldWideScience

Sample records for irradiation project progress

  1. Beneficial uses of nuclear waste/sewage sludge irradiation project. Progress report, April 1981-September 1981

    International Nuclear Information System (INIS)

    1982-05-01

    The objective is the further development and transfer of sludge irradiation technology to the municipal sector. At the conclusion of this project, a number of sludge irradiation demonstration plants will have been constructed and placed in operation by municipalities across the country. The following program elements have been established to ensure successful accomplishment of the program objectives: technology transfer by means of municipal demonstration plants; research support and data base development through operation of the SIDSS (Sandia Irradiator for Dried Sewage Solids) pilot plant; engineering support for the demonstration plants by SNL and LANL to include required support for NEPA/licensing activities, risk assessment, safety, and basic design engineering support to A and E firms; life sciences and agricultural R and D support by NMSU for base program activities and for demonstration plants; quality assurance activities to support licensing and other requirements; and program management. During the period covered by this report, the objectives of the BU/SSIP project have been expanded to include determination of an appropriate role for DOE and SNL in food irradiation. Progress on the program elements for the period April 1, 1981 through September 30, 1981, is discussed in detail

  2. Food irradiation makes progress

    International Nuclear Information System (INIS)

    Kooij, J. van

    1984-01-01

    In the past fifteen years, food irradiation processing policies and programmes have been developed both by a number of individual countries, and through projects supported by FAO, IAEA and WHO. These aim at achieving general acceptance and practical implementation of food irradiation through rigorous investigations of its wholesomeness, technological and economic feasibility, and efforts to achieve the unimpeded movement of irradiated foods in international trade. Food irradiation processing has many uses

  3. Progress in food irradiation

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    The volume contains reports from 19 countries on the state of the project in the field of food irradiation (fruit, vegetables, meat, spices) by means of gamma rays. The tests ran up to 1982. Microbiological radiosensitivity and mutagenicity tests provide a yard stick for irradiation efficiency.

  4. Beneficial uses of nuclear byproducts/sewage sludge irradiation project. Progress report, October 1982-March 1983

    International Nuclear Information System (INIS)

    Pierce, J.D.

    1984-11-01

    Gamma irradiation of various commodities in the Sandia Irradiator for Dried Sewage Solids (SIDSS) and the Gamma Irradiation Facility (GIF) continued during this reporting period. One truck-load of grapefruit was irradiated. Pelletized straw was irradiated to doses of 1, 5, 10, 20, and 40 megarads in SIDSS. Sludge, virus, and fungus samples were irradiated. Infected ground pork and infected pig carcasses were irradiated in the GIF as a method of Trichinella spiralis inactivation. Other experiments conducted in the GIF included irradiation of cut flowers to extend their shelf life and irradiation of kepone to induce its degradation. Waste Encapsulation and Storage Facility (WESF) capsule studies at ORNL and SNLA continued. A purchase order was placed for a prototype sludge solar dryer. Sewage Sludge Irradiation Transportation System (SSITS) cask activities included thermal stress analyses of cask performance following separation from the impact limiters during a fire. Analyses of cask performance, when loaded with six strontium-90 (Sr-90) capsules, also were done

  5. Beneficial uses of nuclear byproducts/sewage sludge irradiation project. Progress report, October 1981-March 1982

    International Nuclear Information System (INIS)

    Zak, B.D.

    1982-12-01

    A cooperative agreement was made between Albuquerque and DOE during FY81 for sewage sludge irradiation in upgrading the sewage treatment facilities. Other potential sites for implementation of sludge irradiation technology were also considered. Sludge was irradiated in the SIDSS for agronomy and animal feeding experiments. Sludge was also irradiated for use on turf areas. Cooperative work was also performed on grapefruit irradiation for fruit fly disinfestation, and on irradiation of sugar cane waste (bagasse) for enhanced ruminant digestibility. Preliminary design work began on a shipping cask to accomodate WESF Cs-137 capsules. The shielding performance, steady-state thermal response, and response to specified regulatory accident sequences have been evaluated. Work has been initiated on pathogen survival and post-irradiation pathogen behavior. Agronomy field, greenhouse, and soil chemistry studies continue. Various field experiments are ongoing. The fifth year of a five-year program to evaluate the potential use of a sludge product as a range feed supplement for cows is now in its fifth year. In agricultural economics, a preliminary marketing plan has been prepared for Albuquerque

  6. Byproducts Utilization Program: Sewage Sludge Irradiation Project. Progress report, July-December 1983

    Energy Technology Data Exchange (ETDEWEB)

    1984-12-01

    Engineering support for a demonstration-scale irradiator design included assisting the City of Albuquerque in preparing a comprehensive site plan for their proposed sludge handling and treatment facilities. The solar sludge dryer has been delivered to SNLA. A preliminary sludge drying experiment indicated the importance of optimizing stirring and air flow. Installation of instrumentation and mechanical equipment continued. The Sandia Irradiator for Dried Sewage Solids (SIDSS) was used to irradiate 23 tons of dried, digested sewage sludge for the New Mexico State University (NMSU) Department of Crop and Soil Sciences. Gamma Irradiation Facility (GIF) operations included irradiation of ground pork for Toxoplasma gondii inactivation experiments, irradiation of surgical supplies and soil samples. Beneficial Uses Shipping Systems (BUSS) cask activities included near completion of the two full-scale cask bodies. Work continued on the Cask Safety Analysis Report (SAR) including additional analyses to reconfigure the six strontium fluoride capsules and/or reduce the number of capsules accommodated. NMSU has indicated no regrowth of salmonellae occurred in the irradiated sludge stockpile, while salmonellae did regrow in the unirradiated stockpile. Analyses of raw and digested sewage sludge from the Albuquerque Waste Water Treatment Plant showed levels of Yersinia enterocolitica (a human pathogen of emerging significance) to be below detection limits.

  7. Byproducts Utilization Program: Sewage Sludge Irradiation Project. Progress report, July-December 1983

    International Nuclear Information System (INIS)

    1984-12-01

    Engineering support for a demonstration-scale irradiator design included assisting the City of Albuquerque in preparing a comprehensive site plan for their proposed sludge handling and treatment facilities. The solar sludge dryer has been delivered to SNLA. A preliminary sludge drying experiment indicated the importance of optimizing stirring and air flow. Installation of instrumentation and mechanical equipment continued. The Sandia Irradiator for Dried Sewage Solids (SIDSS) was used to irradiate 23 tons of dried, digested sewage sludge for the New Mexico State University (NMSU) Department of Crop and Soil Sciences. Gamma Irradiation Facility (GIF) operations included irradiation of ground pork for Toxoplasma gondii inactivation experiments, irradiation of surgical supplies and soil samples. Beneficial Uses Shipping Systems (BUSS) cask activities included near completion of the two full-scale cask bodies. Work continued on the Cask Safety Analysis Report (SAR) including additional analyses to reconfigure the six strontium fluoride capsules and/or reduce the number of capsules accommodated. NMSU has indicated no regrowth of salmonellae occurred in the irradiated sludge stockpile, while salmonellae did regrow in the unirradiated stockpile. Analyses of raw and digested sewage sludge from the Albuquerque Waste Water Treatment Plant showed levels of Yersinia enterocolitica (a human pathogen of emerging significance) to be below detection limits

  8. Food irradiation: progress in Canada

    International Nuclear Information System (INIS)

    Wilson, B.K.

    1985-01-01

    The subject is discussed under the headings: food irradiation regulatory situation in Canada; non-regulatory developments (poultry irradiation; fish irradiation; Government willingness to fund industry initiated projects; Government willingness to establish food irradiation research and pilot plant facilities; food industry interest is increasing significantly; Canadian Consumers Association positive response; the emergence of new consulting and entrepreneurial firms). (U.K.)

  9. Progress in food irradiation: Australia

    Energy Technology Data Exchange (ETDEWEB)

    Wills, P A

    1982-11-01

    Progress in food irradiation treatment of Australian commodities, such as meat, pepper, honey, fruit is described. Irradiation took place with /sup 60/Co gamma radiation while testing for radiation sensitivity of Staphyllococcus in meat, of Bacillus aureus in pepper, of Streptococcus plutin and Bacillus larvae in honey, and of the fruitfly Dacus tryoni infesting fruit. So far, two State Health Commissions in Australia have authorised irradiation of shrimps with their sale being restricted to the State authorising treatment.

  10. Progress in food irradiation: Australia

    International Nuclear Information System (INIS)

    Wills, P.A.

    1982-01-01

    Progress in food irradiation treatment of Australian commodities, such as meat, pepper, honey, fruit is described. Irradiation took place with 60 Co gamma radiation while testing for radiation sensitivity of Staphyllococcus in meat, of Bacillus aureus in pepper, of Streptococcus plutin and Bacillus larvae in honey, and of the fruitfly Dacus tryoni infesting fruit. Sofar, two State Health Commissions in Australia have authorised irradiation of shrimps with their sale being restricted to the State authorising treatment. (AJ) [de

  11. Development of indigenous irradiator - current progress and challenges

    International Nuclear Information System (INIS)

    Anwar A Rahman; Mohd Arif Hamzah; Muhd Nor Atan; Aznor Hassan; Fadil Ismail; Julia A Karim; Rosli Darmawan

    2009-01-01

    The development of indigenous irradiator is one of Prototype Development Center main project to support Nuclear Malaysia services. Three (3) projects have been identified and currently the status is in final stage of design. There are some issues and challenges encountered, which delayed the project progress. The paper will discuss the current progress of development and challenges faced in designing the irradiator. (Author)

  12. The ARBOR irradiation project

    Energy Technology Data Exchange (ETDEWEB)

    Petersen, C. E-mail: claus.petersen@imf.fzk.de; Shamardin, V.; Fedoseev, A.; Shimansky, G.; Efimov, V.; Rensman, J

    2002-12-01

    The irradiation project 'ARBOR', for 'Associated Reactor Irradiation in BOR 60', includes 150 mini-tensile/low cycle fatigue specimens and 150 mini-Charpy (KLST) specimens of nine different RAFM steels. Specimens began irradiation on 22 November 2000 in an specially designed irradiation rig in BOR 60, in a fast neutron flux (>0.1 MeV) of 1.8x10{sup 15} n/cm{sup 2} s and with direct sodium cooling at a temperature less than 340 deg. C. Tensile, low cycle fatigue and Charpy specimens of the following materials are included: EUROFER 97, F82H mod., OPTIFER IVc, EUROFER 97 with different boron contents, ODS-EUROFER 97, as well as EUROFER 97 electron-beam welded and reference bulk material, from NRG, Petten.

  13. The ARBOR irradiation project

    International Nuclear Information System (INIS)

    Petersen, C.; Shamardin, V.; Fedoseev, A.; Shimansky, G.; Efimov, V.; Rensman, J.

    2002-01-01

    The irradiation project 'ARBOR', for 'Associated Reactor Irradiation in BOR 60', includes 150 mini-tensile/low cycle fatigue specimens and 150 mini-Charpy (KLST) specimens of nine different RAFM steels. Specimens began irradiation on 22 November 2000 in an specially designed irradiation rig in BOR 60, in a fast neutron flux (>0.1 MeV) of 1.8x10 15 n/cm 2 s and with direct sodium cooling at a temperature less than 340 deg. C. Tensile, low cycle fatigue and Charpy specimens of the following materials are included: EUROFER 97, F82H mod., OPTIFER IVc, EUROFER 97 with different boron contents, ODS-EUROFER 97, as well as EUROFER 97 electron-beam welded and reference bulk material, from NRG, Petten

  14. Progress in food irradiation: Nigeria

    International Nuclear Information System (INIS)

    Adesuyi, S.A.

    1978-01-01

    The effect of gamma radiation on Aspergillus flavus and some of its toxic metabolites has been studied. This involved the determination of radio-sensitivity of aflatoxins to gamma radiation and the toxicity of irradiated aflatoxins, the effect of irradiation on the formation of aflatoxins in some Nigerian foodstuffs and on the macronutrients of soya-gari diet, and isolation and characterisation of radiation-induced mutants in A. flavus. A research project is now underway to investigate the effect on nutrients in foodstuffs following the destruction of fungal toxins (aflatoxins) and fungi by gamma irradiation (OGBADU, Ahmadu Bello University, Zaria). (orig.) [de

  15. Progress in food irradiation: Uruguay

    Energy Technology Data Exchange (ETDEWEB)

    Merino, F G

    1978-12-01

    Durability and tolerability of several vegetable sorts such as potatoes, onions, and garlick after irradiation with gamma radiation are investigated. In questioning the consumers, a positive attitude of the consumers towards irradiated products was noted.

  16. Progress in food irradiation: Uruguay

    International Nuclear Information System (INIS)

    Merino, F.G.

    1978-01-01

    Durability and tolerability of several vegetable sorts such as potatoes, onions, and garlick after irradiation with gamma radiation are investigated. In questioning the consumers, a positive attitude of the consumers towards irradiated products was noted. (AJ) [de

  17. Alaskan Commodities Irradiation Project

    International Nuclear Information System (INIS)

    Zarling, J.P.; Swanson, R.B.; Logan, R.R.

    1988-01-01

    The ninety-ninth US Congress commissioned a six-state food irradiation research and development program to evaluate the commercial potential of this technology. Hawaii, Washington, Iowa, Oklahoma and Florida as well as Alaska have participated in the national program; various food products including fishery products, red meats, tropical and citrus fruits and vegetables have been studied. The purpose of the Alaskan study was to review and evaluate those factors related to the technical and economic feasibility of an irradiator in Alaska. This options analysis study will serve as a basis for determining the state's further involvement in the development of food irradiation technology. 40 refs., 50 figs., 53 tabs

  18. Progress in food irradiation: Bangladesh

    Energy Technology Data Exchange (ETDEWEB)

    Ahmed, M

    1982-11-01

    The Bangladesh contribution deals with fish preservation by irradiation and, in this context, with the radiosensitivity of mesophilic and psychophilic microorganisms. Sprouting inhibition is studied with potatoes and onions. A further part deals with irradiation of spices. Mutagenicity tests were carried on rats and mice fed with irradiated fish. The tests were performed at the Institute for Food and Radiation Biology, near Dacca in December 1981.

  19. Progress in food irradiation: Germany

    International Nuclear Information System (INIS)

    Diehl, J.F.

    1978-01-01

    The report on German results of irradiation of food covers the period from 1975 to 1978. Special attention is paid to the radiation-chemical changes of food, radiation microbiology with regard to clostridium botulinum, the enzymatic behaviour, physical alterations in several sorts of meat and vegetables after irradiation, tolerability investigations, mutagenicity tests, and, finally, legal aspects. (AJ) [de

  20. Recent progress in food irradiation in Korea

    International Nuclear Information System (INIS)

    Joong-ho Kwon

    1988-01-01

    This paper discusses progress in research into food irradiation and government approval of the process in Korea. The development of the first cobalt-60 food irradiator is described and the role of international, trade and consumer associations in its commercialization discussed. (U.K.)

  1. Progress in food irradiation: Netherlands

    Energy Technology Data Exchange (ETDEWEB)

    Stegeman, H

    1982-11-01

    The Dutch contribution gives an accurate description of the gamma radio preservation facility where a great variety of types of fruit, vegetables, meat and spices were treated with radiosensitivity of bacteria and fungi as well as spores being tested. Wholesomeness studies were limited to feeding tests on pigs and mutagenity tests on Salmonella typhimurium. 12 products were given as authorized for irradiation stating irradiation effect, radiation dose and shelf-life duration.

  2. Progress in food irradiation: Japan

    International Nuclear Information System (INIS)

    Kawashima, K.

    1982-01-01

    Potatoes, onion, rice, wheat, meat and mushrooms were preserved by gamma irradiation. Combination effects were studied on Pseudomonas radiora and Escherichia coli. Mutagenic effects were studied on mice and bone-marow cells, on Salmonella typhimurium, Escherichia coli and on cells from Chinese hamsters. (AJ) [de

  3. Progress in food irradiation: France

    Energy Technology Data Exchange (ETDEWEB)

    Henon, Y; Lamy, M R

    1982-11-01

    The French article deals with radiopreservation of fruit, vegetables and meat in general applying electron and gamma radiation. Wholesomeness of irradiated products was tested on mice showing that radiopreservation is to be preferred over autoclavage. Legislation permits radiopreservation of spices at a dose of up to 11 kGy in 1982.

  4. Progress in food irradiation: Hungary

    International Nuclear Information System (INIS)

    Farkas, J.

    1978-01-01

    The Hungarian contribution describes the radiation-chemical behaviour of tomatopulp and bio-chemical alterations connected with this. The radiation microbiology concerns phytophtora infestans. Results of irradiation of several vegetable sorts and of animal food, as well as tolerance studies with rats are described. Higher attention is paid to legal and economical aspects and consumers' questions. (AJ) [de

  5. Progress in food irradiation: France

    International Nuclear Information System (INIS)

    Henon, Y.; Lamy, M.R.

    1982-01-01

    The French article deals with radiopreservation of fruit, vegetables and meat in general applying electron and gamma radiation. Wholesomeness of irradiated products was tested on mice showing that radio preservation is to be preferred over autoclavage. Legislation permits radiopreservation of spices at a dose of up to 11 kGy in 1982. (AJ) [de

  6. Progress in food irradiation: Italy

    International Nuclear Information System (INIS)

    Baraldi, D.

    1978-01-01

    The effect of irradiation on the nutritional properties of a number of foodstuffs including potatoes, onions, tomatoes, grapes, dried fruits, carrots, and animal feed is under investigation. The main components investigated are: reducing sugars, total sugars, saccharose, vitamins C and A, niacin, carotenes, free amino acids, total and soluble nitrogen. This research has been the subject of a collaborative work programm. (orig./AJ) [de

  7. Shippingport: Overall project progress

    International Nuclear Information System (INIS)

    Crimi, F.P.

    1989-01-01

    The Shippingport atomic power station (SAPS) consisted of the nuclear steam supply system and associated radioactive waste processing systems, which were owned by the US Department of Energy (DOE), and the balance of plant, owned by the Duquesne Light Company. The station is located at Shippingport, Pennsylvania, on 7 acres of land leased by DOE from Duquesne Light Company. The Shippingport Station Decommissioning Project (SSDP) is being performed under contract to the DOE by the General Electric Company (GE) and its preselected subcontractor, MK-Ferguson Company, as the decommissioning operations contractor (DOC). This paper describes the decommissioning work that has been accomplished since July 1988, and the project's cost and schedule status. As the first decommissioning of a commercial, full-scale nuclear power plant, the SSDP is expected to set the standards for the demolition of future nuclear power plants

  8. Progress in food irradiation: Brazil

    International Nuclear Information System (INIS)

    Bernardes, B.

    1978-01-01

    The initial work programme started with investigations on the use of irradiation for preserving beans, onions, rice, potato, wheat, and corn. These products constitute an important part of the average daily diet and, in spite of the large harvests, very heavy losses are incurred each year. Rather than adopt the research results obtained in other countries, the Brazilian authorities considered it essential to establish optimal dose levels for these products and to analyse for physical, chemical and organoleptic alterations under the conditions prevailing in Brazil. Similarly wholesomeness testing has been included as an integral part of the research programme in compliance with the requirements of the National Health Ministry. (orig.) [de

  9. Progress in food irradiation: Belgium

    International Nuclear Information System (INIS)

    Hespeels, L.

    1982-01-01

    The Belgian ''Institut National des Radioelements - National Institut voor Radio-Elementen, I.R.E.'' at Fleurus performed the studies described in this report over the years of 1979-82. Subjected to treatment with gamma radiation were: natural gums, dried vegetables, animal protein, egg products, mush rooms, tea leaves, herb teas and gelatine, and the preservation effect on mesophilic, coli-form bacteria as well as on thermophilic and mesophilic spores of Bacillus was examined. The foodstuffs were further tested for mesophilic Chlostridium spores, pathogenic staphylococci, Salmonellae, moulds and yeasts. A slightly increased radiation tolerance following several treatments, but reduced sensitivity to antibiotics was found. Gamma irradiation has shown to be a good preservation method of industrially manufactures enxymes. On whole someness studied, there was no indication of increased mutagenicity or increase in the number of reversions of Salmonella. (AJ) [de

  10. Progressive Finland sees progress with nuclear projects

    Energy Technology Data Exchange (ETDEWEB)

    Dalton, David [NucNet, Brussels (Belgium)

    2016-02-15

    The Finnish Hanhikivi-1 reactor project is firmly on track and a licence has been granted for construction of a final disposal facility for spent nuclear fuel - the first final repository in the world to enter the construction phase. Significant progress has been made with plans for Finland to build its sixth nuclear reactor unit at Hanhikivi. Fennovoima's licensing manager Janne Liuko said the company expects to receive the construction licence for the Generation III+ Hanhikivi-1 plant in late 2017. The application was submitted to the Finnish Ministry of Employment and the Economy in June 2015.

  11. Skyhook project: progress report

    International Nuclear Information System (INIS)

    Ainsworth, E.J.; Prioleau, J.C.; Mahlmann, L.J.

    1986-01-01

    The authors have initiated two types of animal experiments to complement and extend the existing data base comparing low- and high-LET radiations, and the studies utilize the Harderian gland model and range-finding or pilot studies on life-span shortening after exposure to heavy charged particles characterized by different LETs. Results from the animal studies have yielded new information concerning relationships between LET and carcinogenic effects and the animal studies are of themselves complementary. The Harderian gland model yields information on in-vivo transformation under conditions of tumor promotion that result from excess pituitary hormones, while the life-span studies, involving no extraneous promotion, indicate interactions between tumor induction and expression. Comparison of tumorigenic results on the Harderian gland and life shortening responses are expected to be highly informative. The purpose of the Skyhook Project was to test the hypothesis that LET was an adequate predictor for life shortening and that low-energy charged particles characterized by a LET approximately the same as that for fission neutrons would produce quantitatively similar life-shortening results after single or multifractionated doses. Another purpose was to evaluate life shortening, using comparatively high doses, over a LET range from less than 1 to approximately 200 keV/μm

  12. Progress of JPDR decommissioning project

    International Nuclear Information System (INIS)

    Kiyota, M.; Yanagihara, S.

    1995-01-01

    The Japan Power Demonstration Reactor (JPDR) decommissioning project is progressively achieving its final goal; the project will be finished by March 1996 to release the JPDR's site into unrestricted use in a green field condition. The new techniques which developed or improved in R and D, the first phase of this program, have been successfully applied to the actual dismantling activities. Some decommissioning wastes have been managed as the first case of onsite shallow land burial based on the new regulatory frame of radioactive waste management. The experiences and the data obtained from the JPDR dismantling activities are expected to contribute to future decommissioning of commercial nuclear power plants. (author)

  13. Progress in food irradiation: The Netherlands

    International Nuclear Information System (INIS)

    Heins, H.G.; Cornelis, J.

    1978-01-01

    Main stress is laid on radiation dosimetry, the radiation chemistry and radiation microbiology in irradiation of several vegetable sorts and sea products. Maximal doses for irradiation are given. (AJ) [de

  14. Progress in food irradiation: South Africa

    International Nuclear Information System (INIS)

    Linde, H.J. van der

    1982-01-01

    The report contains irradiation methods for fruit, vegetables, meat and spices in South Africa with the irradiation effect being studied on pathogenic fungi. A large-scale test in super-markets of Johannesburg and Pretoria showed positive acceptance of irradiated potatoes, mangoes, papayas and strawberries by 90% of consumers. (AJ) [de

  15. Progress on untargeted effects of ionizing irradiation

    International Nuclear Information System (INIS)

    Liu Jing; Chen Jihong; Li Wenjian

    2010-01-01

    The side effect of ionizing irradiation has been paid more attention with its widely using in tumor treating and mutation breeding. In recent years, untargeted effects induced by ionizing irradiation have become a hotspot of radiobiology. Here, according to reported results, we reviewed the types (genomic instability, bystander effect and adaptive response) and mechanisms of untargeted effects of ionizing irradiation in this paper. (authors)

  16. Progress in food irradiation: South Africa

    Energy Technology Data Exchange (ETDEWEB)

    Linde, H.J. van der

    1982-11-01

    The report contains irradiation methods for fruit, vegetables, meat and spices in South Africa with the irradiation effect being studied on pathogenic fungi. A large-scale test in super-markets of Johannesburg and Pretoria showed positive acceptance of irradiated potatoes, mangoes, papayas and strawberries by 90% of consumers.

  17. Detection of irradiated food: current progress on the MAFF programme

    International Nuclear Information System (INIS)

    Blackburn, C.M.; Holley, P.A.; Pryke, D.C.

    1994-01-01

    In their 1986 report the UK's Advisory Committee on Irradiated Food recognized that a generally applicable test was not available. In view of this the Committee advised that documentary control would have to be maintained throughout the processing chain. The Committee considered that detection tests would be an useful supplement for such a control system, and would do much to reassure consumers. In the following year MAFF initiated an R/D programme covering a wide variety of potential methods. The programme now focuses on developing and validating the most promising of these. Whilst it is unlikely that there will ever be an universal test covering all foods, this programme has now reached a point where tests are becoming available for a wide variety of foods. This paper reviews the progress on a number of last years projects of MAFF (Ministry of Agriculture, Fisheries and Food). In addition to the existing MAFF collaboratively tested non-statutory method for herbs and spices, two other methods have now been published: electron spin resonance spectroscopy for meat, and detection of irradiated poultry using the limulus lyasate test based on the presence on 2-alkyl cyclobutanones in irradiated seafood, poultry and meat. The Ministry also takes an active interest in international programmes including European Community and IAEA/FAO initiatives. (author)

  18. Repair-welding technology of irradiated materials - WIM project

    International Nuclear Information System (INIS)

    Nakata, K.; Oishi, M.

    1998-01-01

    A new project on the development of repair-welding technology for core internals and reactor (pressure) vessel, consigned by the Ministry of International Trade and Industry (MITI), has been started from October 1997. The objective of the project is classified into three points as follows: (1) to develop repair-welding techniques for neutron irradiated materials, (2) to prove the availability of the techniques for core internals and reactor (pressure) vessel, and (3) to recommend the updated repair-welding for the Technical Rules and Standards. Total planning, neutron irradiation, preparation of welding equipment are now in progress. The materials are austenitic stainless steels and a low alloy steel. Neutron irradiation is performed using test reactors. In order to suppress the helium aggregation along grain boundaries, low heat input welding techniques, such as laser, low heat input TIG and friction weldings, will be applied. (author)

  19. Progress of food irradiation in the United States

    International Nuclear Information System (INIS)

    Derr, D.D.; Engeljohn, D.L.; Griffin, R.L.

    1995-01-01

    Irradiated foods have not yet made a significant impact in the United States marketplace. What progress has occurred to facilitate their commercialization? Irradiated produce has been sold in small quantities since 1992 and irradiated poultry was introduced in the marketplace in 1993. Federal inspection of irradiated commodities has settled into a regular routine. What must occur to further expand irradiated foods in the marketplace? Petitions to permit irradiation of red meats and seafood are being considered by the Food and Drug Administration (FDA) and a petition to permit the irradiation of shell eggs is being prepared for submission to FDA. In addition, the U.S. Department of Agriculture (USDA) has accelerated efforts to develop the policies and regulatory structure needed to facilitate the approval of new irradiation treatments for imported plant products regulated by quarantine. When will greater commercialization occur? More positive coverage to food irradiation in recent months by both the trade and popular press indicates a change in attitude towards irradiated foods by both consumers and the food industry. Finally, actual consumer response to available irradiated foods casts a favorable light on the potential for increased marketing of value-added irradiated foods. (Author)

  20. Extreme project. Progress report 2006

    International Nuclear Information System (INIS)

    Eyrolle, F.; Masson, O.; Charmasson, S.

    2007-01-01

    The E.X.T.R.E.M.E. project introduced in 2005 to the S.E.S.U.R.E. / L.E.R.C.M. has for objectives to acquire data on the consequences of the extreme climatic meteorological episodes on the distribution of the artificial radioisotopes within the various compartments of the geosphere. This report presents the synthesis of the actions developed in 2006 in positioning and in co financing of the project by means of regional or national research programs (C.A.R.M.A., E.X.T.R.E.M.A., E.C.C.O.R.E.V.I.), of data acquisition, valuation and scientific collaboration. (N.C.)

  1. Recent progress in food preservation by irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Vas, K [Food and Agriculture Organization of the United Nations, Rome (Italy)

    1977-01-01

    The possible use of ionizing radiations in food preservation is discussed. It has been recognized that treatment of foods with ionizing radiations not only serves the purpose of stabilizing them in their original state, but may also enhance the hygienic properties of certain foodstuffs. Several examples conerning improvements in food quality and preservation by irradiation in different countries have been reported. The economic viewpoint and the possibilities for use of irradiated products in international trade are discussed. The development of international cooperation in sharing of research results and information and sharing of costs of wholesomeness testing have been pointed out.

  2. The 1989 progress report: Irradiated solids

    International Nuclear Information System (INIS)

    Novion, C. de.

    1989-01-01

    The 1989 activity report of the laboratory of Irradiated Solids of the Polytechnic School (France) is presented. Investigations on disordered solids are the main field of research. Disorder and its consequences on the physical properties of materials are studied. Some of the most important results are: the experimental demonstration of the creation of defects by electron excitation in iron; the precipitation induced by the irradiation of high temperature electrons; the demonstration of an additional trapping of magnetic flux lines and the increase of the critical current in the YBa2Cu307 superconducting oxyde [fr

  3. Recent progress in food preservation by irradiation

    International Nuclear Information System (INIS)

    Vas, K.

    1977-01-01

    The possible use of ionizing radiations in food preservation is discussed. It has been recognized that treatment of foods with ionizing radiations not only serves the purpose of stabilizing them in their original state, but may also enhance the hygienic properties of certain foodstuffs. Several examples conerning improvements in food quality and preservation by irradiation in different countries have been reported. The economic viewpoint and the possibilities for use of irradiated products in international trade are discussed. The development of international cooperation in sharing of research results and information and sharing of costs of wholesomeness testing have been pointed out. (G.C.)

  4. Decomposable Mandrel Project. Progress report

    International Nuclear Information System (INIS)

    Letts, S.A.; Fearon, E.; Allison, L.; Buckley, S.; Saculla, M.; Cook, R.

    1995-01-01

    We report on our progress in developing a new technology to produce both Nova and NIF scale capsules using a depolymerizable mandrel. In this technique we use poly(α-methylstyrene) (PAMS) beads or shells as mandrels which are overcoated with plasma polymer. The poly(α-methylstyrene) mandrel is then thermally depolymerized to gas phase monomer which diffuses away through the more thermally stable plasma polymer coating, leaving a hollow shell. Since our last report we have concentrated on characterization of the final shell. Starting with PAMS bead mandrels leads to distorted pyrolyzed shells because of thermally induced creep of the CH coating. We found that plasma polymer coatings on hollow shell mandrels shrink isotropically during pyrolysis and maintain sphericity. We are now concentrating our efforts on the use of microencapsulated shells to prepare targets with buried diagnostic layers or inner wall surface texture

  5. Learning by Doing: the Progressive Novella Project.

    Science.gov (United States)

    Conroy, Michael G.

    1996-01-01

    States that the Progressive Novella Project for high school students involves the collaborative writing of a 35-50 page novella. Explains that prior to the actual writing process, students are educated in the basic elements of fiction writing. Describes the division of labor into groups. Comments that the results of the project are invariably…

  6. Ultraviolet irradiation of nucleic acids and related compounds. Final progress report

    International Nuclear Information System (INIS)

    Wang, S.Y.

    1976-01-01

    Progress is reported on the following research projects: photohydration of pyrimidine derivatives; thymine dimerization; uv-induced formation of pyrimidinyl radicals; formation of a coupled product by irradiation of 5-bromouracil derivatives; studies on pyrimidine adducts; molecular aggregates-puddle formation hypothesis of pyrimidine photodimerization; and topochemical studies of structures of dimers and of crystalline arrangements

  7. Materials Modification Under Ion Irradiation: JANNUS Project

    International Nuclear Information System (INIS)

    Serruys, Y.; Trocellier, P.; Ruault, M.-O.; Henry, S.; Kaietasov, O.; Trouslard, Ph.

    2004-01-01

    JANNUS (Joint Accelerators for Nano-Science and Nuclear Simulation) is a project designed to study the modification of materials using multiple ion beams and in-situ TEM observation. It will be a unique facility in Europe for the study of irradiation effects, the simulation of material damage due to irradiation and in particular of combined effects. The project is also intended to bring together experimental and modelling teams for a mutual fertilisation of their activities. It will also contribute to the teaching of particle-matter interactions and their applications. JANNUS will be composed of three accelerators with a common experimental chamber and of two accelerators coupled to a 200 kV TEM

  8. Tunneling progress on the Yucca Mountain Project

    International Nuclear Information System (INIS)

    Hansmire, W.H.; Munzer, R.J.

    1996-01-01

    The current status of tunneling progress on the Yucca Mountain Project (YMP) is presented in this paper. The Exploratory Studies Facility (ESF), a key part of the YMP, has been long in development and construction is ongoing. This is a progress report on the tunneling aspects of the ESF as of January 1, 1996. For purposes of discussion in this summary, the tunneling has progressed in four general phases. The paper describes: tunneling in jointed rock under low stress; tunneling through the Bow Ridge Fault and soft rock; tunneling through the Imbricate Fault Zone; and Tunneling into the candidate repository formation

  9. Effect of total lymphoid irradiation in chronic progressive multiple sclerosis

    International Nuclear Information System (INIS)

    Cook, S.D.; Devereux, C.; Troiano, R.; Hafstein, M.P.; Zito, G.; Hernandez, E.; Lavenhar, M.; Vidaver, R.; Dowling, P.C.

    1986-01-01

    Total lymphoid irradiation (TLI; 1980 cGy) or sham irradiation was given to 40 patients with chronic progressive multiple sclerosis (MS) in a prospective, randomised, double-blind study. During mean follow-up of 21 months, MS patients treated with TLI has less functional decline than sham-irradiated MS patients (p<0.01). A significant relation was noted between absolute blood lymphocyte counts in the first year after TLI and subsequent course, patients with higher lymphocyte counts generally having a worse prognosis (p<0.01). TLI was well tolerated and associated with only mild short-term, and to date, long-term side-effects. (author)

  10. Progress in food irradiation: South Africa

    International Nuclear Information System (INIS)

    Linde, H.J. van der

    1978-01-01

    The most significant development to date is the commissioning of a pilot plant for the treatment of subtropical fruits at Tzaneen (N. Transvaal) in January 1977. The purpose of this facility is to generate commercial quantities of treated produce for process and product evaluation. The irradiator consists of a six-metre-deep pool filled with water. The product is lowered in two large, watertight containers which surround the plaque source. To provide for dose homogeneity, the containers are rotated at half the exposure time. With the present loading of cobalt-60, the treatment time for one batch of approximately 350 kg of fruit is approximately one hour. The pilot plant has been successfully used this year to treat approximately 6.5 t of mangoes in the commercial sea-shipment trial, as well as several small consignments of avocados and papayas sent to local markets for evaluation. The existing facilities are the same as described in the previous report. The commercial sterilization plant (AECL JS6500) has been up-graded to 400 kCi of cobalt-60. The research loop in this plant has been utilized to treat 10.5 t of potatoes which were supplied to local supermarkets for trial sale purposes. (orig.) [de

  11. Progress towards a new Canadian irradiation-research facility

    International Nuclear Information System (INIS)

    Lee, A.G.; Lidstone, R.F.

    1993-01-01

    As reported at the second meeting of the International Group on Research Reactors, Atomic Energy of Canada Limited (AECL) is evaluating its options for future irradiation facilities. During the past year significant progress has been made towards achieving consensus on the irradiation requirements for AECL's major research programs and interpreting those requirements in terms of desirable characteristics for experimental facilities in a research reactor. The next stage of the study involves identifying near-term and long-term options for irradiation-research facilities to meet the requirements. The near-term options include assessing the availability of the NRU reactor and the capabilities of existing research reactors. The long-term options include developing a new irradiation-research facility by adapting the technology base for the MAPLE-X10 reactor design. Because materials testing in support of CANDU power reactors dominates AECL's irradiation requirements, the new reactor concept is called the MAPLE Materials Testing Reactor (MAPLE-MTR). Parametric physics and engineering studies are in progress on alternative MAPLE-MTR configurations to assess the capabilities for the following types of test facilities: - fast-neutron sites, that accommodate materials-irradiation assemblies, - small-diameter vertical fuel test loops that accommodate multielement assemblies, - large-diameter vertical fuel test loops, each able to hold one or more CANDU fuel bundles, - horizontal test loops, each able to hold full-size CANDU fuel bundles or small-diameter multi-element assemblies, and - horizontal beam tubes

  12. Project Progress Assessment Report (PPAR) 2015

    International Nuclear Information System (INIS)

    Sall, Baba

    2015-01-01

    This evaluation reports reviews basic information, output achievement, equipment and human resources, comment and recommendations. It highlights outputs Fully achieved, those which are partially achieved or in progress and also non achieved outputs. Regarding comments and lessons learned, counterpart stated that the overall timeline of the project is respected, even if activities are delayed to adapt to technical, financial and human resources constraints. The results obtained are in line with expectations thanks to a rigorously respected scientific approach. The Collegial Coordination of the project (DSV-LNERV-CIRAD) and the TO are in phase on the conduct of the Project the collection of baseline data is a crucial phase in the implementation of tsetse control programs. It makes it possible to implement a good strategy. The scientific and technical rigor and the good atmosphere within the Project team are also to be retained.

  13. Project Progress Assessment Report (PPAR) 2012

    International Nuclear Information System (INIS)

    Sall, Baba

    2012-01-01

    This evaluation reports reviews basic information, output achievement, equipment and human resources, comment and recommendations. It highlights outputs Fully achieved, those which are partially achieved or in progress and also non achieved outputs. Regarding comments and lessons learned, counterpart stated that the overall timeline of the project is respected, even if activities are delayed to adapt to technical, financial and human resources constraints. The results obtained are in line with expectations thanks to a rigorously respected scientific approach. The Collegial Coordination of the project (DSV-LNERV-CIRAD) and the TO are in phase on the conduct of the Project the collection of baseline data is a crucial phase in the implementation of tsetse control programs. It makes it possible to implement a good strategy. The scientific and technical rigor and the good atmosphere within the Project team are also to be retained.

  14. The ALPHA project: A progress report

    International Nuclear Information System (INIS)

    Yadigaroglu, G.

    1995-01-01

    A review of the ALPHA project is presented, including a summary of progress and current status. The project comprises the experimental and analytical investigation of the long-term decay heat removal phenomena from the containment of the next generation of passive Advanced Light Water Reactors. In its present phase, the project is directed to the investigation of the Simplified Boiling Water Reactor (SBWR) Passive Containment Cooling system. The project includes separate-effects tests of containment phenomena (the LINX program). The effects of aerosols that may result from hypothetical severe accidents are also considered (the AIDA program). The construction and commissioning of the major ALPHA experimental facilities, PANDA, LINX-2 and AIDA is complete and the first series of tests are underway. Scaling studies have guided their design. Several small-scale experiments and studies have already produced valuable results

  15. High-dose irradiated food: Current progress, applications, and prospects

    Science.gov (United States)

    Feliciano, Chitho P.

    2018-03-01

    Food irradiation as an established and mature technology has gained more attention in the food industry for ensuring food safety and quality. Primarily used for phytosanitary applications, its use has been expanded for developing various food products for varied purposes (e.g. ready-to-eat & ready-to-cook foods, hospital diets, etc.). This paper summarized and analyzed the recent progress and application of high-dose irradiation and discussed its prospects in the field of food product development, its safety and quality.

  16. Shippingport Station Decommissioning Project (SSDP). A progress report

    International Nuclear Information System (INIS)

    Mullee, G.R.; Usher, J.M.

    1986-01-01

    The Shippingport Atomic Power Station was shutdown in October, 1982 by the Plant Operator, Duquesne Light Company, for decommissioning by the US Department of Energy. The planning for decommissioning was completed in September, 1983. In September, 1984 operational responsibility for the station was transferred to the DOE's Decommissioning Operations Contractor - the General Electric Company (assisted by an integrated subcontractor, MK Ferguson Company). Significant accomplishments to date include the completion of all prerequisites for decommissioning, the removal of asbestos from plant systems, loading of irradiated reactor components into the reactor vessel for shipment, the commencement of electrical deactivations and the commencement of piping/component removal. Decontamination and waste processing are progressing in support of the project schedule. The reactor vessel will be shipped as one piece on a barge for burial at Hanford, Washington. The final release of the site is scheduled for April, 1990. A technology transfer program is being utilized to disseminate information about the project

  17. Progress in developing the concept for the irradiation research facility

    International Nuclear Information System (INIS)

    Lee, A.G.; Bishop, W.E.; Gillespie, G.E.; Zeng, Y.

    1996-04-01

    At the 16th annual Canadian Nuclear Society conference, AECL presented the case for replacing the NRU reactor with an Irradiation Research Facility (IRF) to test CANDU fuels and materials and to perform advanced materials research using neutrons. AECL developed a cost estimate of $500 million for the reference IRF concept, and estimated that it would require 87 months to complete. AECL has initiated a pre-project program to develop the IRF concept and to minimize uncertainties related to feasibility and licensability, and to examine options for reducing the overall project cost before project implementation begins. (author) 10 refs., 2 figs

  18. SLIGHTLY IRRADIATED FUEL (SIF) INTERIM DISPOSITION PROJECT

    International Nuclear Information System (INIS)

    Norton, S.H.

    2010-01-01

    CH2M HILL Plateau Remediation Company (CH2M HILL PRC) is proud to submit the Slightly Irradiated Fuel (SIF) Interim Disposition Project for consideration by the Project Management Institute as Project of the Year for 2010. The SIF Project was a set of six interrelated sub-projects that delivered unique stand-alone outcomes, which, when integrated, provided a comprehensive and compliant system for storing high risk special nuclear materials. The scope of the six sub-projects included the design, construction, testing, and turnover of the facilities and equipment, which would provide safe, secure, and compliant Special Nuclear Material (SNM) storage capabilities for the SIF material. The project encompassed a broad range of activities, including the following: Five buildings/structures removed, relocated, or built; Two buildings renovated; Structural barriers, fencing, and heavy gates installed; New roadways and parking lots built; Multiple detection and assessment systems installed; New and expanded communication systems developed; Multimedia recording devices added; and A new control room to monitor all materials and systems built. Project challenges were numerous and included the following: An aggressive 17-month schedule to support the high-profile Plutonium Finishing Plant (PFP) decommissioning; Company/contractor changeovers that affected each and every project team member; Project requirements that continually evolved during design and construction due to the performance- and outcome-based nature ofthe security objectives; and Restrictions imposed on all communications due to the sensitive nature of the projects In spite of the significant challenges, the project was delivered on schedule and $2 million under budget, which became a special source of pride that bonded the team. For years, the SIF had been stored at the central Hanford PFP. Because of the weapons-grade piutonium produced and stored there, the PFP had some of the tightest security on the Hanford

  19. SLIGHTLY IRRADIATED FUEL (SIF) INTERIM DISPOSITION PROJECT

    Energy Technology Data Exchange (ETDEWEB)

    NORTON SH

    2010-02-23

    CH2M HILL Plateau Remediation Company (CH2M HILL PRC) is proud to submit the Slightly Irradiated Fuel (SIF) Interim Disposition Project for consideration by the Project Management Institute as Project of the Year for 2010. The SIF Project was a set of six interrelated sub-projects that delivered unique stand-alone outcomes, which, when integrated, provided a comprehensive and compliant system for storing high risk special nuclear materials. The scope of the six sub-projects included the design, construction, testing, and turnover of the facilities and equipment, which would provide safe, secure, and compliant Special Nuclear Material (SNM) storage capabilities for the SIF material. The project encompassed a broad range of activities, including the following: Five buildings/structures removed, relocated, or built; Two buildings renovated; Structural barriers, fencing, and heavy gates installed; New roadways and parking lots built; Multiple detection and assessment systems installed; New and expanded communication systems developed; Multimedia recording devices added; and A new control room to monitor all materials and systems built. Project challenges were numerous and included the following: An aggressive 17-month schedule to support the high-profile Plutonium Finishing Plant (PFP) decommissioning; Company/contractor changeovers that affected each and every project team member; Project requirements that continually evolved during design and construction due to the performance- and outcome-based nature ofthe security objectives; and Restrictions imposed on all communications due to the sensitive nature of the projects In spite of the significant challenges, the project was delivered on schedule and $2 million under budget, which became a special source of pride that bonded the team. For years, the SIF had been stored at the central Hanford PFP. Because of the weapons-grade piutonium produced and stored there, the PFP had some of the tightest security on the Hanford

  20. Irradiation-induced precipitation and solute segregation in alloys. Fourth annual progress report, February 1, 1981-March 31, 1982

    International Nuclear Information System (INIS)

    Ardell, A.J.

    1982-04-01

    The studies of irradiation-induced solute segregation (IISS) and irradiation-induced precipitation (IIP) in Ni-Si and Pd-Fe alloys have been completed. Progress is reported for several other projects: irradiation damage in binary Pd-Cr, -Mn and -V alloys (15 at. %); IIP in Pd-Mo and Pd-W alloys; IIP in Pd-25 at. % Cr alloy; and irradiation damage effects in proton-bombarded metallic glasses (Ni-65 Zr, 40 Fe 40 Ni 14 P6B). 27 figures

  1. Progress of the EAST project in China

    International Nuclear Information System (INIS)

    Wan, Y.X.; Wu, S.T.; Weng, P.D.; Li, J.G.; Gao, D.M.

    2005-01-01

    The Experimental Advanced Superconducting Tokamak (EAST) project is one of the National Mega-Projects of Science Research of China, which was approved by Chinese government in 1998. EAST is a full superconducting tokamak with an elongated plasma cross-section. The mission of the project is to widely investigate both of the physics and the technologies of advanced tokamak operations, especially the mechanism of power and particle handling for steady-state operations. The basic requirements for the EAST tokamak are full superconducting coils, suitable inductive current system, continuous working non-inductive current driven and heating systems, flexible operation scenarios, flexible J(r) and P(r) control, reliable and fast plasma positioning and shaping control, changeable plasma facing components, advanced divertor and diagnostics. Significant progress of the EAST project has been achieved during last two years. The R and D programs, mainly focused on the superconducting magnets, have processed successfully. The prototypes of main parts have been fabricated and qualified. Most of the key parts of the machine have been delivered to the assembly site. The assembly of the device has begun. It is planned to obtain the first plasma in 2005. The detail information of the testing results of superconducting magnets will be given in this paper. The assembly plan and the experimental plan will be introduced, too. (author)

  2. Wholesomeness studies in the International Food Irradiation Project

    Energy Technology Data Exchange (ETDEWEB)

    Elias, P S [International Food Irradiation Project, Federal Research Centre for Nutrition

    1980-01-01

    Despite more than 25 years of history as an effective food preservation method, food irradiation is still subject to strict legislative control in many countries and scientific investigations are required to provide reassurance as to the safety of irradiated food. The International Food Irradiation Project was set up on October 14, 1970 to facilitate the objective evaluation of the wholesomeness of irradiated foodstuffs. Its major activities are; (1) wholesomeness testing of irradiated foods, (2) research on and investigations into the methodology of wholesomeness testing, (3) dissemination of information, and (4) assisting national and international authorities in their consideration of acceptance of irradiated food. In particular, the project over the past nine years had been devoted to the provision of data to national health authorities and international bodies. Up to now, 23 studies were and are being carried out for the project under contract. Subjects for the studies include wheat, wheat flour, potatoes, fish, rice, mango, spices, dried dates, onions and cocoa beans.

  3. Effect of bleomycin and irradiation on G2 progression

    International Nuclear Information System (INIS)

    Kimler, B.F.

    1979-01-01

    The interaction of bleomycin and x-irradiation on the induction of G 2 delay in Chinese hamster ovary cells was investigated utilizing the mitotic selection procedure for cell cycle analysis. Following the addition of BLM, the number of cells selected in mitosis remained at control level for a refractory period and then decreased. The location of the transition point, i.e., the age in G 2 at which cells become refractory to a progression blockade, was concentration-dependent, ranging from the S/G 2 boundary at low concentrations to the G 2 /M boundary at high concentrations. Depending upon the concentration of the drug used and the duration of exposure, the mitotic rate either decreased to zero or else leveled off at some intermediate value and then recovered to the control level. The duration of BLM-induced division delay was thus dependent upon the concentration used and the duration of exposure. When cells were treated with pulses of bleomycin (10-500 μg/ml) in addition to x-irradiation, the mitotic rate declined as with exposure to x-ray alone. However, the recovery from radiation-induced division delay and the subsequent reappearance of mitotic cells in the selection window was delayed until the cells had recovered from their BLM-induced division delay. This implies that, in contrast to the synergistic effects observed for cell lethality, BLM and radiation do not interact in the production of a progression blockade and the resultant division delay

  4. The Astronomy Genealogy Project: A Progress Report

    Science.gov (United States)

    Tenn, Joseph S.

    2016-01-01

    Although it is not yet visible, much progress has been made on the Astronomy Genealogy Project (AstroGen) since it was accepted as a project of the Historical Astronomy Division (HAD) three years ago. AstroGen will list the world's astronomers with information about their highest degrees and advisors. (In academic genealogy, your thesis advisor is your parent.) A small group (the AstroGen Team) has compiled a database of approximately 12,000 individuals who have earned doctorates with theses (dissertations) on topics in astronomy, astrophysics, cosmology, or planetary science. These include nearly all those submitted in Australia, Canada, the Netherlands, and New Zealand, and most of those in the United States (all through 2014 for most universities and all through 1990 for all). We are compiling more information than is maintained by the Mathematics Genealogy Project (MGP). In addition to name, degree, university, year of degree, and thesis advisor(s), all provided by MGP as well, we are including years of birth and death when available, mentors in addition to advisors, and links to the thesis when it is online and to the person's web page or obituary, when we can find it. We are still struggling with some questions, such as the boundaries of inclusion and whether or not to include subfields of astronomy. We believe that AstroGen will be a valuable resource for historians of science as well as a source of entertainment for those who like to look up their academic family trees. A dedicated researcher following links from AstroGen will be able to learn quite a lot about the careers of astronomy graduates of a particular university, country, or era. We are still seeking volunteers to enter the graduates of one or more universities.

  5. The PLX- α Project: Progress and Plans

    Science.gov (United States)

    Hsu, S.; Witherspoon, F. D.; Cassibry, J.; Gilmore, M.; Samulyak, R.; Stoltz, P.; PLX-α Team

    2016-10-01

    The Plasma Liner Experiment-ALPHA (PLX- α) project aims to demonstrate the viability of spherically imploding plasma liners as a standoff driver for plasma-jet-driven magneto-inertial fusion (PJMIF). In the past year, progress has been made in designing and testing new contoured-gap coaxial guns, 3D model development and simulations (via Eulerian and Lagrangian hydrocodes) of PLX- α-relevant plasma-liner formation/implosion via up to 60 plasma jets ( 100 kJ of liner kinetic energy), 1D semi-analytic and numerical modeling of reactor-scale PJMIF (10s of MJ of liner kinetic energy), and preparation/upgrade of the PLX facility/diagnostics. The design goal for the coaxial guns is to form plasma jets of up to initial n 2 ×1016 cm-3, mass 5 mg, Vjet 50 km/s, rjet = 4 cm, and length 10 cm. The modeling research is assessing ram-pressure amplification and Mach-number degradation during liner convergence, evolution of liner non-uniformity amplitude and mode number, and exploration of PJMIF configurations with promising 1D and 2D fusion gains. Conical multi-jet-merging and full-4 π experiments will commence in Fall, 2016 and late 2017, respectively. Supported by the ARPA-E ALPHA Program.

  6. Fluor Hanford Project Focused Progress at Hanford

    International Nuclear Information System (INIS)

    HANSON, R.D.

    2000-01-01

    Fluor Hanford is making significant progress in accelerating cleanup at the Hanford site. This progress consistently aligns with a new strategic vision established by the U.S. Department of Energy's Richland Operations Office (RL)

  7. INTEGRATION OF PROGRESS STRATEGY IN PROJECT MANAGEMENT

    OpenAIRE

    Дмитрий Георгиевич БЕЗУГЛЫЙ

    2015-01-01

    The methods and tools of the developed project promotion, the planning system of promotion strategy are suggested; the main approaches used in the project promotion have been identified. The conclusions about the importance, necessity and role in the promotion of a holistic project management system have been made.

  8. Project accent: graphite irradiated creep in a materials test reactor

    International Nuclear Information System (INIS)

    Brooking, M.

    2014-01-01

    Atkins manages a pioneering programme of irradiation experiments for EDF Energy. One of these projects is Project ACCENT, designed to obtain evidence of a beneficial physical property of the graphite, which may extend the life of the Advanced Gas-cooled Reactors (AGRs). The project team combines the in-house experience of EDF Energy with two supplier organisations (providing the material test reactors and testing facilities) and supporting consultancies (Atkins and an independent technical expert). This paper describes: - Brief summary of the Project; - Discussion of the challenges faced by the Project; and - Conclusion elaborating on the aims of the Project. These challenging experiments use bespoke technology and both un-irradiated (virgin) and irradiated AGR graphite. The results will help to better understand graphite irradiation-induced creep (or stress modified dimensional change) properties and therefore more accurately determine lifetime and safe operating envelopes of the AGRs. The first round of irradiation has been completed, with a second round about to commence. This is a key step to realising the full lifetime ambition for AGRs, demonstrating the relaxation of stresses within the graphite bricks. (authors)

  9. USEPAM Project: The State of Progress

    DEFF Research Database (Denmark)

    Lund, Søren

    The paper represents the introductory speech at the 2nd regional workshop of the USEPAM project in Phnom Penh March 2005. It gives a review of the project's activities and achievements, and an introduction to the objectives, structure and programme of the workshop...

  10. Prediction of irradiation damage effects by multi-scale modelling: EURATOM 3 Framework integrated project perfect

    International Nuclear Information System (INIS)

    Massoud, J.P.; Bugat, St.; Marini, B.; Lidbury, D.; Van Dyck, St.; Debarberis, L.

    2008-01-01

    Full text of publication follows. In nuclear PWRs, materials undergo degradation due to severe irradiation conditions that may limit their operational life. Utilities operating these reactors must quantify the aging and the potential degradations of reactor pressure vessels and also of internal structures to ensure safe and reliable plant operation. The EURATOM 6. Framework Integrated Project PERFECT (Prediction of Irradiation Damage Effects in Reactor Components) addresses irradiation damage in RPV materials and components by multi-scale modelling. This state-of-the-art approach offers potential advantages over the conventional empirical methods used in current practice of nuclear plant lifetime management. Launched in January 2004, this 48-month project is focusing on two main components of nuclear power plants which are subject to irradiation damage: the ferritic steel reactor pressure vessel and the austenitic steel internals. This project is also an opportunity to integrate the fragmented research and experience that currently exists within Europe in the field of numerical simulation of radiation damage and creates the links with international organisations involved in similar projects throughout the world. Continuous progress in the physical understanding of the phenomena involved in irradiation damage and continuous progress in computer sciences make possible the development of multi-scale numerical tools able to simulate the effects of irradiation on materials microstructure. The consequences of irradiation on mechanical and corrosion properties of materials are also tentatively modelled using such multi-scale modelling. But it requires to develop different mechanistic models at different levels of physics and engineering and to extend the state of knowledge in several scientific fields. And the links between these different kinds of models are particularly delicate to deal with and need specific works. Practically the main objective of PERFECT is to build

  11. Wholesomeness studies in the International Food Irradiation Project

    International Nuclear Information System (INIS)

    Elias, P.S.

    1980-01-01

    Despite more than 25 years history as an effective food preservation method, food irradiation is still subject to strict legislative control in many countries and it is required to carry out scientific investigations to reassure the safety of irradiated food. The International Food Irradiation Project was set up on October 14, 1970 to facilitate the objective evaluation of the wholesomeness of irradiated foodstuffs. Its major activities are; (1) wholesomeness testing of irradiated foods, (2) research on and investigations into the methodology of wholesomeness testing, (3) dissemination of information, and (4) assisting national and international authorities in their consideration of acceptance of irradiated food. In particular, the project over the past nine years had been devoted to the provision of data to national health authorities and international bodies. Up to now, 23 studies were and are being carried out for the project under contract. Subject to the studies include wheat, wheat flour, potatoes, fish, rice, mango, spices, dried dates, onions and cocoa beans. (Kitajima, A.)

  12. Progress of the HTR-10 project

    International Nuclear Information System (INIS)

    Zhong, D.; Xu, Y.

    1996-01-01

    This paper briefly introduces the main technical features and the design specifications of the HTR-10. Present status and main progress of the license applications, the design and manufacture of the main components and the engineering experiments as well as the construction of the HTR-10 are summarized. (author). 3 tabs

  13. Geodynamics Project. US progress report, 1975

    Energy Technology Data Exchange (ETDEWEB)

    1976-01-01

    The recommendations of the US Geodynamics Committee relative to program activities are presented. US Program progress is reviewed in the following areas: fine structure of the crust and upper mantle; continuous seismic reflection profiling of the deep basement: Hardeman County, Texas; Mid-Atlantic Ridge - evolution of oceanic lithosphere; internal processes and properties; crystal growing; chemical differentiation of magmas; geodynamic modelling; magnetic problems; plate boundaries; plate interiors; geodynamic syntheses; and eustatic cycles of sea level changes. (MHR)

  14. [The human variome project and its progress].

    Science.gov (United States)

    Gao, Shan; Zhang, Ning; Zhang, Lei; Duan, Guang-You; Zhang, Tao

    2010-11-01

    The main goal of post genomics is to explain how the genome, the map of which has been constructed in the Human Genome Project, affacts activities of life. This leads to generate multiple "omics": structural genomics, functional genomics, proteomics, metabonomics, et al. In Jun. 2006, Melbourne, Australia, Human Genome Variation Society (HGVS) initiated the Human Variome Project (HVP) to collect all the sequence variation and polymorphism data worldwidely. HVP is to search and determine those mutations related with human diseases by association study between genetype and phenotype on the scale of genome level and other methods. Those results will be translated into clinical application. Considering the potential effects of this project on human health, this paper introduced its origin and main content in detail and discussed its meaning and prospect.

  15. JET Project: progress in construction and management

    International Nuclear Information System (INIS)

    Bertolini, E.

    1978-01-01

    The JET Project of the European Community aims to construct and operate one of the largest Tokamak Devices foreseen at present in the field of Fusion Research. The aim of the experiment is to produce and study plasma conditions approaching those needed in a thermonuclear reactor and therefore will involve operation with deuterium--tritium gas

  16. Progress of JAERI neutron science project

    International Nuclear Information System (INIS)

    Oyama, Yukio

    1999-01-01

    Neutron Science Project was started at Japan Atomic Energy Research Institute since 1996 for promoting futuristic basic science and nuclear technology utilizing neutrons. For this purpose, research and developments of intense proton accelerator and spallation neutron target were initiated. The present paper describes the current status of such research and developments. (author)

  17. DOE Robotics Project. Summary of progress for 1991

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-01

    This document provide the bimonthly progress reports on the Department of Energy (DOE) Robotics Project by the University of Michigan. Reports are provided for the time periods of December 90/January 91 through June 91/July 91. (FI)

  18. Conjoint utility analysis of technical maturity and project progress of construction project

    Directory of Open Access Journals (Sweden)

    Ma Wei

    2016-01-01

    Full Text Available In this paper, taking construction project as the research object, the relationship between the project maturity index calculated by the construction project technical risks with different fine degree and the project progress index is studied, and the equilibrium relationship between the Party A’s utility curve and the Party B’s cost curve of using project maturity index and project progress index as the research variables is analyzed. The results show that, when the construction project technical risk division is more precise, the conjoint utility of the project's technical maturity index and the project progress is higher, and the project’s Party A and Party B two sides are closer to the optimal equilibrium. This shows that the construction project technical risk must be finely divided, and managed and controlled respectively, which will help to improve the conjoint utility of the project Party A and Party B two sides.

  19. Progress in the study of reducing food allergenicity by irradiation

    International Nuclear Information System (INIS)

    Gu Kefei; Gao Meixu; Li Chunhong; Pan Jiarong

    2006-01-01

    Food allergy becomes an important factor in food safety areas. As one of the methods to cure allergy, reducing food allergenicity by irradiation becomes a hot topic. This article reviewed the present situation and the mechanism of reducing food allergenicity by irradiation. (authors)

  20. Shippingport station decommissioning project irradiated components transfer: Topical report

    International Nuclear Information System (INIS)

    1988-01-01

    This topical report is a synopsis of the transfer of irradiated components into the Shippingport Reactor Pressure Vessel (RPV) performed at the Shippingport Station Decommissioning Project (SSDP). The information is provided as a part of the Technology Transfer Program to document the preparation activities for the decommissioning of a nuclear power reactor to be removed in one piece

  1. Biorefinery Demonstration Project Final Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Lee, David [University of Georgia Research Foundation, Inc., Athens, GA (United States)

    2015-10-20

    In this project we focused on various aspects of biorefinery technology development including algal-biorefinery technology, thermochemical conversion of biomass to bio-oils and biochar; we tested characteristics and applications of biochars and evaluated nutrient cycling with wastewater treatment by the coupling of algal culture systems and anaerobic digestion. Key results include a method for reducing water content of bio-oil through atomized alcohol addition. The effect included increasing the pH and reducing the viscosity and cloud point of the bio-oil. Low input biochar production systems were evaluated via literature reviews and direct experimental work. Additionally, emissions were evaluated and three biochar systems were compared via a life cycle analysis. Attached growth systems for both algal cultivation and algal harvesting were found to be superior to suspended growth cultures. Nutrient requirements for algal cultivation could be obtained by the recycling of anaerobic digester effluents, thus experimentally showing that these two systems could be directly coupled. Twenty-two journal articles and six intellectual property applications resulted from the cumulative work that this project contributed to programmatically.

  2. Progress of research on the mechanism of microstructure evolution during irradiation with collision cascades

    International Nuclear Information System (INIS)

    Kiritani, Michio

    1997-01-01

    Progress of the research on microstructural evolution during radiation damage accompanied with collision cascades, particularly by neutrons, is summarized from the researches reported in 1995 and 1996. The major part of irradiation was performed with JMTR (Japan Material Testing Reactor), and comparisons were made with the result of D-T fusion neutron irradiation with RTNS-II (Rotating Target Neutron Source, LLNL). The subjects concerned are: (1) Microstructure evolution during irradiation, (2) Processes controlling the accumulation of defects during cascade damage, (3) Subcascades from the viewpoint of point defect cluster formation, (4) Mechanism of suppression of microstructure evolution during temperature cycle neutron irradiation of nickel, (5) Identification of the nature of neutron-irradiation-induced point defect clusters in copper by means of electron irradiation, (6) Easy one-dimensional motion of small interstitial clusters, (7) Identification of the nature of small point defect clusters in neutron irradiated Fe-16Ni-15Cr, (8) Spatial distribution of nucleation of point defect clusters by high energy particle irradiation, (9) Crystallographic orientation dependence of dislocation structures in neutron irradiated metals, (10) Examination of defect accumulation mode with multi-section-removable-irradiation-rig in Japan Material Testing Reactor, (11) Estimation of freely migrating point defects during cascade damage by the growth of helical dislocations, (12) Identification of the nature of neutron-irradiation-induced small point defect clusters in Nickel by means of electron irradiation, (13) Thermal stability of point defect clusters in neutron irradiated Fe-16Ni-15Cr. (author)

  3. LWR pressure vessel irradiation surveillance dosimetry. Quarterly progress report, July--September 1978

    Energy Technology Data Exchange (ETDEWEB)

    Guthrie, G L; McElroy, W N; Lippincott, E P; Gold, R

    1978-12-01

    Program objectives and progress to date by the national laboratories in LWR pressure vessel irradiation surveillance dosimetry are summarized. Participants in the program include: Rockwell International, Hanford Engineering Development Laboratory, National Bureau of Standards, and Oak Ridge National Laboratory.

  4. Progress report on irradiation experiment on small size specimens in high temperature flux module

    Energy Technology Data Exchange (ETDEWEB)

    Ramesh, M.; Jacquet, P.; Chaouadi, R.

    2011-02-15

    This report describes the progress made in IFREC/DEMO Research and Development Program during the year 2010 at SCK/CEN. This task is part of demonstrating the possibility to irradiate small specimens in the HFTM modules that will be used in DEMO. Different small specimens of three candidate materials of DEMO fusion reactor will be irradiated with the objective of validating the specimen geometry and size to reliably characterize the mechanical properties of unirradiated and in future of irradiated materials.

  5. Imperial Valley Environmental Project: progress report

    Energy Technology Data Exchange (ETDEWEB)

    Phelps, P.L.; Anspaugh, L.R. (eds.)

    1977-10-19

    Progress is reported in six areas of research: air quality, water quality, ecosystem quality, subsidence and seismicity, socioeconomic effects, and integrated assessment. A major goal of the air quality element is to evaluate the rate of emission of H/sub 2/S, CO/sub 2/, H/sub 2/, N/sub 2/, CH/sub 4/, and C/sub 2/H/sub 6/ from the operation of the geothermal loop experimental facility at Niland. Concentrations of H/sub 2/S were found to vary between 1500 to 4900 ppM by volume at the Niland facility. To distinguish between geothermal fluids and other waters, extensive sampling networks were established. A major accomplishment was the installation of a high-resolution subsidence-detection network in the Salton Sea geothermal field area, centered on the test facility at Niland. A major effort went into establishing a background of data needed for subsequent impact assessments related to socioeconomic issues raised by geothermal developments. Underway are a set of geothermal energy scenarios that include power development schedules, technology characterizations, and considerations of power-plant-siting criteria. A Gaussian air-pollution model was modified for use in preliminary air-quality assessments. A crop-growth model was developed to evaluate impacts of gases released from geothermal operations on various agricultural crops. Work is also reported on the legal analysis of geothermal legislation and the legal aspects of water-supply utilization. Remote sensing was directed primarily at the Salton Sea, Heber, Brawley, and East Mesa KGRAs. However, large-format photography of the entire Salton Trough was completed. Thermal and multispectral imaging was done for several selected sites in the Salton Sea KGRA. (JGB)

  6. Total and Spectral Solar Irradiance Sensor (TSIS) Project Status

    Science.gov (United States)

    Carlisle, Candace

    2018-01-01

    TSIS-1 studies the Sun's energy input to Earth and how solar variability affects climate. TSIS-1 will measure both the total amount of light that falls on Earth, known as the total solar irradiance (TSI), and how that light is distributed among ultraviolet, visible and infrared wavelengths, called solar spectral irradiance (SSI). TSIS-1 will provide the most accurate measurements of sunlight and continue the long-term climate data record. TSIS-1 includes two instruments: the Total Irradiance Monitor (TIM) and the Spectral Irradiance Monitor (SIM), integrated into a single payload on the International Space Station (ISS). The TSIS-1 TIM and SIM instruments are upgraded versions of the two instruments that are flying on the Solar Radiation and Climate Experiment (SORCE) mission launched in January 2003. NASA Goddard's TSIS project responsibilities include project management, system engineering, safety and mission assurance, and engineering oversight for TSIS-1. TSIS-1 was installed on the International Space Station in December 2017. At the end of the 90-day commissioning phase, responsibility for TSIS-1 operations transitions to the Earth Science Mission Operations (ESMO) project at Goddard for its 5-year operations. NASA contracts with the University of Colorado Laboratory for Atmospheric and Space Physics (LASP) for the design, development and testing of TSIS-1, support for ISS integration, science operations of the TSIS-1 instrument, data processing, data evaluation, calibration and delivery to the Goddard Earth Science Data and Information Services Center (GES DISC).

  7. The OPTHER Project: Progress toward the THz Amplifier

    DEFF Research Database (Denmark)

    Paoloni, C; Brunetti, F; Di Carlo, A

    2011-01-01

    This paper describes the status of the OPTHER (OPtically driven TeraHertz AmplifiERs) project and progress toward the THz amplifier realization. This project represents a considerable advancement in the field of high frequency amplification. The design and realization of a THz amplifier within...... this project is a consolidation of efforts at the international level from the leading scientific and industrial European organizations working with vacuum electronics....

  8. Progress in food irradiation: United States of America

    Energy Technology Data Exchange (ETDEWEB)

    Brynjolfsson, A [Army Natick Research and Development Command, MA (USA). Food Engineering Lab.

    1978-12-01

    On 20 pages, a detailed situation report on the research- and development level of irradiation of several foodstuffs, radio-microbiology, dosimetry, and the radiation sources used is given. The Radio-chemical alterations are explored at model systems.

  9. Low level chronic irradiation of salmon. Annual progress report

    International Nuclear Information System (INIS)

    Hershberger, W.K.; Donaldson, L.R.; Bonham, K.; Brannon, E.L.

    1975-01-01

    A question of primary importance in the use of nuclear energy is what effect the effluent from a reactor will have on the aquatic life in the water used for cooling. Of particular concern in the Pacific Northwest are the effects of chronic irradiation on salmon that use the rivers for spawning and nursery area. The present program was designed in the early days of the atomic era to address this concern, and to provide some insight into the long-term consequences of exposure of fish to chronic, low levels of irradiation. The experimental techniques are described and data are summarized on irradiation effects on the entire life cycle of the chinook salmon. Also, long-term effects transmitted to future generations were assessed in F 1 offspring of irradiated parents

  10. US company's new nuclear project progresses

    International Nuclear Information System (INIS)

    Archie, Jeffrey B.

    2011-01-01

    Operated by South Carolina Electric and Gas Company in the southeastern United States, V.C. Summer Nuclear Station has maintained a reputation of excellence for more than 25 years. The key to its success: placing safety as its first priority, keeping a keen focus on operations, establishing a culture of continuous learning, and embracing collaboration with industry peers. This philosophy guides its new nuclear project, which SCE and G has undertaken to meet the need for baseload generation in its service area in a manner that is clean, safe, reliable, and efficient. In the process, SCE and G is generating jobs and boosting the economy. Site preparation has been under way since 2009. SCE and G anticipates receiving its combined construction and operating license from the Nuclear Regulatory Commission, the independent, federal agency that oversees commercial nuclear power plants in the U.S., in late 2011 or early 2012, which will allow major construction to commence. The 2 new reactors are scheduled to begin commercial operation in 2016 and 2019, respectively, placing V.C. Summer at the forefront of a U.S. nuclear renaissance and carrying its legacy of excellence into the future. (orig.)

  11. Progress and tendency in heavy ion irradiation mutation breeding

    International Nuclear Information System (INIS)

    Zhou Libin; Li Wenjian; Qu Ying; Li Ping

    2008-01-01

    In recent years, the intermediate energy heavy ion biology has been concerned rarely comparing to that of the low-energy ions. In this paper, we summarized the advantage of a new mutation breeding method mediated by intermediate energy heavy ion irradiations. Meanwhile, the present state of this mutation technique in applications of the breeding in grain crops, cash crops and model plants were introduced. And the preview of the heavy ion irradiations in gene-transfer, molecular marker assisted selection and spaceflight mutation breeding operations were also presented. (authors)

  12. Progress of scientific researches and project of CSR in IMP

    International Nuclear Information System (INIS)

    Jin Genming

    2004-01-01

    The article reviews the recent progress of the scientific researches including synthesis of new nuclides, investigations of the isospin effects in heavy ion collisions, studies of the nuclear structure in high spin states and the applications of heavy ion beams to other scientific researches, such as biology and material science. It also gives a brief introduction of the development of the design and progress of the new project of heavy ion cooling storage ring (CSR) of Lanzhou. (author)

  13. Forecasting of Radiation Belts: Results From the PROGRESS Project.

    Science.gov (United States)

    Balikhin, M. A.; Arber, T. D.; Ganushkina, N. Y.; Walker, S. N.

    2017-12-01

    Forecasting of Radiation Belts: Results from the PROGRESS Project. The overall goal of the PROGRESS project, funded in frame of EU Horizon2020 programme, is to combine first principles based models with the systems science methodologies to achieve reliable forecasts of the geo-space particle radiation environment.The PROGRESS incorporates three themes : The propagation of the solar wind to L1, Forecast of geomagnetic indices, and forecast of fluxes of energetic electrons within the magnetosphere. One of the important aspects of the PROGRESS project is the development of statistical wave models for magnetospheric waves that affect the dynamics of energetic electrons such as lower band chorus, hiss and equatorial noise. The error reduction ratio (ERR) concept has been used to optimise the set of solar wind and geomagnetic parameters for organisation of statistical wave models for these emissions. The resulting sets of parameters and statistical wave models will be presented and discussed. However the ERR analysis also indicates that the combination of solar wind and geomagnetic parameters accounts for only part of the variance of the emissions under investigation (lower band chorus, hiss and equatorial noise). In addition, advances in the forecast of fluxes of energetic electrons, exploiting empirical models and the first principles IMPTAM model achieved by the PROGRESS project is presented.

  14. SOCIAL PROGRESS AND ECONOMIC PROJECTS FOR DISADVANTAGED GROUPS IN ROMANIA

    Directory of Open Access Journals (Sweden)

    Aurelian Virgil BALUTA

    2016-12-01

    Full Text Available The paper aims to analyse the social progress, social politics, social law and successful projects applicable to the some disadvantaged groups: Roma people and woman. Inclusion of Roma people is analysed from economic point of view. The economic problems of equality by gender is presented in terms of labour rate and other relevant ratio. For Roma people the focus of analyse is also on labour involvement. The chapters of the communication are: introduction, literature review ( state of art in the field of social progress, theoretical background, tools for social progress in EU, economic inclusion of Roma population, economic equality by gender, conclusions.

  15. Irradiation for progressive paraparesis in β-thalassemia intermedia

    International Nuclear Information System (INIS)

    Wilson, J.J.; Hill, M.E.; Crookston, J.H.

    1980-01-01

    This article describes the case history of a patient suffering from β-thalassemia intermedia. The patient was treated with radiation to the thoraic spine (1500 rad in 5 days) and his condition improved. Subsequent tomography indicated the success of this type of irradiation without recourse to laminectomy. (T.I.)

  16. Neuropathological changes following experimental stereotactic irradiation. Progressive injuries of oligodendrocytes

    International Nuclear Information System (INIS)

    Ohtsuka, Takashi; Seiki, Yoshikatsu; Nakano, Jiro; Shibata, Iekado; Terao, Hideo

    1997-01-01

    This report describes the results of neuropathological examinations in 14 rabbit brains after 100 Gy of linear stereotactic irradiation. The tissue around the area of radiation necrosis was subjected to special examination. Fourteen rabbits were given a single dose of 100 Gy by a linear accelerator with a use of the 10 mm collimator. Animals were sacrificed serially after irradiation. Brains were removed and formalin treated paraffin sections were made. All sections were stained by H and E, GFAP and TUNEL (TdT-mediated dUTP-biotin nick end labeling method) stain. Pathological changes of vessels and neural tissue around the area of necrosis were examined. Three months after irradiation, TUNEL-positive oligodendrocytes were seen scattered in the white matter or the radiated field, and after 6 months, these changes extended around the radiating field, but vessels and neurons appeared to be intact. Two years after irradiation, massive necrosis had occurred in the radiated area. Thickness and fibrinoid degeneration of the vessel walls were evident in the area around the necrosis. These vessel changes were recognized in the zone of the 40 Gy radiated region. TUNEL-positive oligodendrocytes were also observed around the necrosis, and were scattered in the white matter and corpus callosum over the region of vascular changes. These findings suggested the following: In the later period after irradiation, oligodendrocytes in the peripheral zone of necrosis are damaged by ischemia and edema, which are caused by vascular changes. TUNEL-positive oligodendrocytes which exsisted in the white matter and corpus callosum distal to the radiated area may exhibit development of serial damage of oligodendrocytes in those regions. (author)

  17. The Cordoba and Wolsung projects: a progress report

    International Nuclear Information System (INIS)

    Brooks, G.L.

    1977-06-01

    The Cordoba and Wolsung projects mark the entry into the international sales arena of the standardized Canadian 600 MWe CANDU-PHW reactor design. The Cordoba station experienced a setback in the early stages when severe inflation in Argentina led to a renegotiation of the contract. However, following this, good progress has been made and the current forecast completion date in 1980 is expected to be achieved. The Wolsung project experienced difficulties early in the project due to site conditions, so that site work commenced some 9-10 months later than originally planned. These difficulties had predictable effects upon the progress of site-related engineering and it is expected that the project completion date will be somewhat delayed

  18. Progresses in studies on 2-alkylcyclobutanones in irradiated lipid-containing foods

    International Nuclear Information System (INIS)

    Zhang Haiwei; Ha Yiming; Wang Feng

    2007-01-01

    When foods are irradiated, the free fatty acids and triacylglycerides in the food are decomposed to 2-alkylcyclobutanones (2-ACBs), which have been one of the focuses in food irradiation studies since they were dis- covered in irradiated lipid-containing foods. As specific markers, 2-ACBs could be used to detect irradiated food. The production and stability of 2-ACBs are affected strongly by the irradiation does and temperature and preservation conditions, etc. On the other hand, potential health hazard assessments of 2-ACBs have been studied extensively. Re- cent progresses in 2-ACBs detecting methods from irradiated food, toxicological studies on 2-ACBs, and factors affecting production and stability of 2-ACBs are reviewed in this paper. (authors)

  19. The international arctic seas assessment project: Progress report

    International Nuclear Information System (INIS)

    Sjoeblom, K.L.; Linsley, G.S.

    1995-01-01

    The article provides some background information on wastes dumped into the Arctic Seas and describes the progress made within the framework of International Arctic Seas Assessment Project (IASAP) lunched to assess the health and environmental implications of the dumping. 1 tab

  20. Interactive reliability analysis project. FY 80 progress report

    International Nuclear Information System (INIS)

    Rasmuson, D.M.; Shepherd, J.C.

    1981-03-01

    This report summarizes the progress to date in the interactive reliability analysis project. Purpose is to develop and demonstrate a reliability and safety technique that can be incorporated early in the design process. Details are illustrated in a simple example of a reactor safety system

  1. Progress in Aging Epidemiology in Japan: The JAGES Project

    Directory of Open Access Journals (Sweden)

    Katsunori Kondo

    2016-07-01

    Full Text Available Aging is a prominent topic in global health. The purpose of this report is to document progress in two of our research projects in Japan, which currently is the most aged society in the world. The Japan Gerontological Evaluation Study (JAGES is one of the largest nation-wide research projects on aging, with more than 100 000 participants in 2010 and 2013. One of the notable findings is that community participation is a significant determinant of older people’s health. We have also made progress in the development of the JAGES Health Equity Assessment and Response Tools (HEART, which is a management tool for developing age-friendly cities. This progress suggests that community perspective and management of health promotion in the communities are valuable and require further research.

  2. Progresses in irradiating SBS for road asphalt applications

    International Nuclear Information System (INIS)

    Li Linfan; Xie Leidong; Fu Haiying; Li Yintao; Yu Min; Sheng Kanglong; Yao Side

    2006-01-01

    Technical developments at SINAP to improve properties of SBS, a styrene-butadiene- styrene copolymer, for road asphalt applications are reviewed. In an attempt to better solve problems related to undesirable compatibility of SBS to asphalt components, we proposed a new method to modify the SBS molecular chains with ionizing radiations through radiation graft copolymerization and radiation crosslinking. Grafting a monomer with polar functional groups onto SBS molecules improves compatibility of SBS to polar components of asphalt, hence enhanced storage stability of the polymer modified asphalt (PMA), while crosslinks of SBS molecular chains endues increased physical properties to the PMA. Mechanisms of the radiation effects were studied with a series of SBS samples irradiated by 60 Co γ-rays or electron beams. The PMA and macadam-blended PMA samples showed higher performance than the control, i.e. SBS-modified asphalt by conventional approaches. The results can be summarized as follows. 1. The grafted SBS enhances thermostability of saturates and aromatics, the two asphalt components that exhibit the biggest SBS-swelling effect. The resins of asphalt, however, can hardly be absorbed by SBS, and the SBS is in a phase-separation status with the resins. Therefore, it is crucial to strengthen reactions between SBS and the resins to obtain stable and high quality PMA. 2. SBS molecular chains can be crosslinked with irradiation of a few tens of kGy. The crosslinking effect was evidenced by increased molecular weight of SBS and wider distribution of the molecular weight in GPC measurement of the irradiated SBS samples, and by decreased activation energy of viscosity in rheological measurement, in which the storage modulus G' increased and the loss modulus G' declined with increasing doses, indicating a larger elastic component and smaller viscous component in the irradiated SBS. Correspondingly, temperature sensitivity of the irradiated SBS reduced. Blended with SBS

  3. Brazilian Irradiation Project: CAFE-MOD1 validation experimental program

    International Nuclear Information System (INIS)

    Mattos, Joao Roberto Loureiro de; Costa, Antonio Carlos L. da; Esteves, Fernando Avelar; Dias, Marcio Soares

    1999-01-01

    The Brazilian Irradiation Project whose purpose is to provide Brazil with a minimal structure to qualify the design, fabrication and quality procedures of nuclear fuels, consists of three main facilities: IEA-R1 reactor of IPEN-CNEN/SP, CAFE-MOD1 irradiation device and a unit of hot cells. The CAFE-MOD1 is based on concepts successfully used for more than 20 years in the main nuclear institutes around the world. Despite these concepts are already proved it should be adapted to each reactor condition. For this purpose, there is an ongoing experimental program aiming at the certification of the criteria and operational limits of the CAFE-MOD1 in order to get the allowance for its installation at the IEA-R1 reactor. (author)

  4. Making Progress: The Use of Multiple Progress Reports to Enhance Advertising Students' Media Plan Term Projects

    Science.gov (United States)

    Kritz, Gary H.; Lozada, Hector R.; Long, Mary M.

    2007-01-01

    Since the AACSB mandates that students demonstrate effective oral and written communication skills, it is imperative that business professors do what is necessary to improve such skills. The authors investigate whether the use of using multiple progress reports in an Advertising class project improves the final product. The data results show that…

  5. Heavy-section steel irradiation program. Progress report, October 1994--March 1995

    International Nuclear Information System (INIS)

    Corwin, W.R.

    1995-10-01

    This document is the October 1994-March 1995 Progress Report for the Heavy Section Steel Irradiation Program. The report contains a summary of activities in each of the 14 tasks of the HSSI Program, including: (1) Program management, (2) Fracture toughness shifts in high-copper weldments, (3) Fracture toughness shifts in low upper-shelf welds, (4) Irradiation effects in a commercial low upper-shelf weld, (5) Irradiation effects on weld heat-affected zone and plate materials, (6) Annealing effects in low upper-shelf welds, (7) Microstructural analysis of radiation effects, (8) In-service irradiated and aged material evaluations, (9) Japanese power development reactor vessel steel examination, (10) fracture toughness curve shift method, (11) Special technical assistance, (12) Technical assistance for JCCCNRS, (13) Correlation monitor materials, and (14) Test reactor irradiation coordination. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database

  6. Irradiated test fuel shipment plan for the LWR MOX fuel irradiation test project

    International Nuclear Information System (INIS)

    Shappert, L.B.; Dickerson, L.S.; Ludwig, S.B.

    1998-01-01

    This document outlines the responsibilities of DOE, DOE contractors, the commercial carrier, and other organizations participating in a shipping campaign of irradiated test specimen capsules containing mixed-oxide (MOX) fuel from the Idaho National Engineering and Environmental Laboratory (INEEL) to the Oak Ridge National Laboratory (ORNL). The shipments described here will be conducted according to applicable regulations of the US Department of Transportation (DOT), US Nuclear Regulatory Commission (NRC), and all applicable DOE Orders. This Irradiated Test Fuel Shipment Plan for the LWR MOX Fuel Irradiation Test Project addresses the shipments of a small number of irradiated test specimen capsules and has been reviewed and agreed to by INEEL and ORNL (as participants in the shipment campaign). Minor refinements to data entries in this plan, such as actual shipment dates, exact quantities and characteristics of materials to be shipped, and final approved shipment routing, will be communicated between the shipper, receiver, and carrier, as needed, using faxes, e-mail, official shipping papers, or other backup documents (e.g., shipment safety evaluations). Any major changes in responsibilities or data beyond refinements of dates and quantities of material will be prepared as additional revisions to this document and will undergo a full review and approval cycle

  7. Beneficial Uses Program. Progress report, period ending December 31, 1977. [Irradiated sewage sludge

    Energy Technology Data Exchange (ETDEWEB)

    1978-11-01

    The Beneficial Uses Program is a comprehensive program to develop the necessary technologies for cost-beneficial uses of existing and future surplus radioactive materials. The major portion of the work at Sandia is concentrated in two sub-programs: the Waste Resources Utilization Program and the Separation Technology and Source Development Program. Progress is reported on: (1) the Sandia Irradiator for Dried Sewage Solids; (2) bacteriology; (3) mycology; (4) virology; (5) animal feeds containing irradiated sewage solids; (6) use of irradiated sewage sludge as fertilizer; and (7) development of /sup 90/Sr and /sup 137/Cs radiation sources obtained from radioactive wastes. (TFD)

  8. Beneficial Uses Program. Progress report, period ending March 31, 1979. [Irradiated sewage sludge

    Energy Technology Data Exchange (ETDEWEB)

    1979-08-01

    The Beneficial Uses Program is a comprehensive program to develop the necessary technologies for cost-beneficial uses of existing and future surplus radioactive materials. The major portion of the work at Sandia is concentrated in two sub-programs: the Waste Resources Utilization Program and the Separation Technology and Source Development Program. Progress is reported on: (1) the Sandia Irradiator for Dried Sewage Solids; (2) bacteriology; (3) mycology; (4) virology; (5) animal feeds containing irradiated sewage solids; (6) use of irradiated sewage sludge as fertilizer; and (7) development of /sup 137/Cs radiation sources obtained from radioactive wastes. (TFD)

  9. Beneficial uses program. Progress report ending December 31, 1978. [Irradiated sewage sludge

    Energy Technology Data Exchange (ETDEWEB)

    1979-03-01

    The Beneficial Uses Program is a comprehensive program to develop the necessary technologies for cost-beneficial uses of existing and future surplus radioactive materials. The major portion of the work at Sandia is concentrated in two sub-programs: The Waste Resources Utilization Program and the Separation Technology and Source Development Program. Progress is reported on: (1) the Sandia Irradiator for Dried Sewage Sludge; (2) bacteriology; (3) mycology; (4) virology; (5) animal feeds containing irradiated sewage solids; (6) use of irradiated sewage sludge as fertilizer; and (7) development of /sup 90/Sr and /sup 137/Cs radiation sources obtained from radioactive wastes. (TFD)

  10. Beneficial Uses Program. Progress report for period ending June 30, 1978. [Irradiated sewage sludge

    Energy Technology Data Exchange (ETDEWEB)

    1979-01-01

    The Beneficial Uses Program is a comprehensive program to develop the necessary technologies for cost-beneficial uses of existing and future surplus radioactive materials. The major portion of the work at Sandia is concentrated in two sub-programs: the Waste Resources Utilization Program and the Separation Technology and Source Development Program. Progress is reported on: (1) the Sandia Irradiator for Dried Sewage Solids; (2) bacteriology; (3) mycology; (4) virology; (5) animal feeds containing irradiated sewage solids; (6) use of irradiated sewage sludge as fertilizer; and (7) development of /sup 137/Cs radiation sources obtained from radioactive wastes. (TFD)

  11. Ceramic Technology Project semiannual progress report, October 1992--March 1993

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, D.R.

    1993-09-01

    This project was developed to meet the ceramic technology requirements of the OTS`s automotive technology programs. Although progress has been made in developing reliable structural ceramics, further work is needed to reduce cost. The work described in this report is organized according to the following work breakdown structure project elements: Materials and processing (monolithics [Si nitride, carbide], ceramic composites, thermal and wear coatings, joining, cost effective ceramic machining), materials design methodology (contact interfaces, new concepts), data base and life prediction (structural qualification, time-dependent behavior, environmental effects, fracture mechanics, nondestructive evaluation development), and technology transfer.

  12. Crystalline Repository Project. Technical progress report, October 1982-March 1983

    International Nuclear Information System (INIS)

    1985-01-01

    This document reports the progress being made periodically on the development of a geologic repository in crystalline rock for the permanent disposal of high-level nuclear waste. The reporting elements are arranged by the work breakdown structure so that related studies are presented together. The studies are reported by the Office of Crystalline Respository Development (OCRD), a prime contractor of the US Department of Energy Repository Project Office. The studies include work by other prime contractors and by subcontractors to OCRD

  13. A desk evaluation review of project BGD/5/010 food irradiation. Project desk evaluation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-03-26

    To increase the availability of food, the Bangladesh Atomic Energy Commission (BAEC), through its institute of Food and Radiation Biology (IFRB), has for many years pursued research studies in the use of ionizing radiation for food disinfestation and preservation. The Agency has been assisting these research efforts since the late 1970s. Project BGD/5/010, Food Irradiation, as reformulated in 1984, was to take on-going activities ones step further, with the main objective of demonstrating on a semi-commercial scale the efficacy and profitability of food irradiation in reducing the high storage losses of economically important food, such as potatoes, onions, dried fish and other seafood. A further objective was the transfer of food irradiation technology to the relevant industries in Bangladesh. The total budget of the project for the years 1983 through 1992 includes 5.1 man-months of expert services, $1,064,634 for equipment and $29,200 for training. The review was undertaken upon request by the Asia and the Pacific Section, to assess the current status of this ten-year project, which has encountered numerous delays and set-backs and is now nearing completion, and to determine to what extent the experience gained on the project could be useful in the implementation of similar on-going and future projects.

  14. A desk evaluation review of project BGD/5/010 food irradiation. Project desk evaluation

    International Nuclear Information System (INIS)

    1993-01-01

    To increase the availability of food, the Bangladesh Atomic Energy Commission (BAEC), through its institute of Food and Radiation Biology (IFRB), has for many years pursued research studies in the use of ionizing radiation for food disinfestation and preservation. The Agency has been assisting these research efforts since the late 1970s. Project BGD/5/010, Food Irradiation, as reformulated in 1984, was to take on-going activities ones step further, with the main objective of demonstrating on a semi-commercial scale the efficacy and profitability of food irradiation in reducing the high storage losses of economically important food, such as potatoes, onions, dried fish and other seafood. A further objective was the transfer of food irradiation technology to the relevant industries in Bangladesh. The total budget of the project for the years 1983 through 1992 includes 5.1 man-months of expert services, $1,064,634 for equipment and $29,200 for training. The review was undertaken upon request by the Asia and the Pacific Section, to assess the current status of this ten-year project, which has encountered numerous delays and set-backs and is now nearing completion, and to determine to what extent the experience gained on the project could be useful in the implementation of similar on-going and future projects

  15. Alloy development for irradiation performance. Quarterly progress report for period ending December 31, 1980

    Energy Technology Data Exchange (ETDEWEB)

    1981-04-01

    Progress is reported in eight sections: analysis and evaluation studies, test matrices and test methods development, Path A Alloy Development (austenitic stainless steels), Path C Alloy Development (Ti and V alloys), Path D Alloy Development (Fe alloys), Path E Alloy Development (ferritic steels), irradiation experiments and materials inventory, and materials compatibility and hydrogen permeation studies. (DLC)

  16. Alloy development for irradiation performance. Quarterly progress report for period ending December 31, 1980

    International Nuclear Information System (INIS)

    1981-04-01

    Progress is reported in eight sections: analysis and evaluation studies, test matrices and test methods development, Path A Alloy Development (austenitic stainless steels), Path C Alloy Development (Ti and V alloys), Path D Alloy Development (Fe alloys), Path E Alloy Development (ferritic steels), irradiation experiments and materials inventory, and materials compatibility and hydrogen permeation studies

  17. Heavy-Section Steel Irradiation Program. Volume 5, No. 2, Progress report, April 1994--September 1994

    International Nuclear Information System (INIS)

    Corwin, W.R.

    1995-07-01

    The Heavy-Section Steel Irradiation (HSSI) Program has been established with its primary goal to provide a thorough, quantitative assessment of the effects of neutron irradiation on the material behavior and the fracture toughness properties of typical pressure-vessel steels as they relate to light-water RPV integrity. Effects of specimen size; material chemistry; product form and microstructure; irradiation fluence, flux, temperature, and spectrum; and postirradiation annealing are being examined on a wide range of fracture properties. The HSSI Program is arranged into 14 tasks: (1) program management, (2) fracture toughness curve shift in high-copper weldments (Series 5 and 6), (3) K lc and K la curve shifts in low upper-shelf (LUS) welds (Series 8), (4) irradiation effects in a commercial LUS weld (Series 10), (5) irradiation effects on weld heat-affected zone and plate materials (Series 11), (6) annealing effects in LUS welds (Series 9), (7) microstructural and microfracture analysis of irradiation effects, (8) in-service irradiated and aged material evaluations, (9) Japan Power Development Reactor (JPDR) steel examination, (10) fracture toughness curve shift method, (11) special technical assistance, (12) technical assistance for Joint Coordinating Committee on Civilian Nuclear Reactor Safety (JCCCNRS) Working Groups 3 and 12, (13) correlation monitor materials, and (14) test reactor coordination. Progress on each task is reported

  18. Development and progress of the South African uranium enrichment project

    International Nuclear Information System (INIS)

    Roux, A.J.A.; Grant, W.L.; Barbour, R.A.; Loubser, R.S.; Wannenburg, J.J.

    1977-01-01

    The earlier development of the project is briefly reviewed, and some of the salient features of the South African process are touched upon. Development of the separation element in the last 18 months is discussed, as well as further work on the helikon cascade process. A brief description of the helikon cascade operation is given by means of diagrams. Because of time limitations, the complete helikon theory is not presented, but only some examples shown. Experimental work done to verify the helikon concept, as well as theoretical treatment, is presented. A brief report of the progress made on the experimental module of 6 t/a separative work capacity is given. This module, known as Mini-Z, is well advanced and details of its features and construction are shown. A short discussion of progress on the full-scale prototype module, known as Proto-Z, is next presented. The flexibility of such a design to fit a wide range of cascade sizes is considered, as well as cost implications of various approaches to design. Apart from progress on the development of the commercial plant, a brief review is given of the present state of the pilot plant at Valindaba. Some of the information obtained is mentioned. In conclusion, some information is given in regard to further planning and other work on the commercial plant at present being undertaken. Projected operation of the plant and some nuclear fuel service aspects are touched on

  19. Ceramic Technology Project semiannual progress report, April 1992--September 1992

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, D.R.

    1993-07-01

    This project was developed to meet the ceramic technology requirements of the DOE Office of Transportation Systems` automotive technology programs. Significant progress in fabricating ceramic components for DOE, NASA, and DOE advanced heat engine programs show that operation of ceramic parts in high-temperature engines is feasible; however, addition research is needed in materials and processing, design, and data base and life prediction before industry will have a sufficient technology base for producing reliable cost-effective ceramic engine components commercially. A 5-yr project plan was developed, with focus on structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines.

  20. Status and future of food irradiation research project

    International Nuclear Information System (INIS)

    Fujimaki, Masao

    1982-01-01

    The first part of the report presented the results of wholesomeness evaluation of the irradiated potato, onion, rice and wheat by Organization of the National Research Programme on Food Irradiation which conducts food irradiation in Japan. The second part dealt with the wholesomeness evaluation of food irradiation by the joint specialist conference of FAO, IAEA and WHO. It was concluded that irradiation of a maximum mean of 10 KGy or less was unconditionally permissible for every food item, not requiring a toxicity test. However, the relationship between irradiation techniques and economic feasibility, wholesomeness of high dose irradiation, the human effect of use of irradiated food item, food chemistry and nutritional problems remain to be examined. (Chibe, N.)

  1. Progress on the Hanford K basins spent nuclear fuel project

    International Nuclear Information System (INIS)

    Culley, G.E.; Fulton, J.C.; Gerber, E.W.

    1996-01-01

    This paper highlights progress made during the last year toward removing the Department of Energy's (DOE) approximately, 2,100 metric tons of metallic spent nuclear fuel from the two outdated K Basins at the Hanford Site and placing it in safe, economical interim dry storage. In the past year, the Spent Nuclear Fuel (SNF) Project has engaged in an evolutionary process involving the customer, regulatory bodies, and the public that has resulted in a quicker, cheaper, and safer strategy for accomplishing that goal. Development and implementation of the Integrated Process Strategy for K Basins Fuel is as much a case study of modern project and business management within the regulatory system as it is a technical achievement. A year ago, the SNF Project developed the K Basins Path Forward that, beginning in December 1998, would move the spent nuclear fuel currently stored in the K Basins to a new Staging and Storage Facility by December 2000. The second stage of this $960 million two-stage plan would complete the project by conditioning the metallic fuel and placing it in interim dry storage by 2006. In accepting this plan, the DOE established goals that the fuel removal schedule be accelerated by a year, that fuel conditioning be closely coupled with fuel removal, and that the cost be reduced by at least $300 million. The SNF Project conducted coordinated engineering and technology studies over a three-month period that established the technical framework needed to design and construct facilities, and implement processes compatible with these goals. The result was the Integrated Process Strategy for K Basins Fuel. This strategy accomplishes the goals set forth by the DOE by beginning fuel removal a year earlier in December 1997, completing it by December 1999, beginning conditioning within six months of starting fuel removal, and accomplishes it for $340 million less than the previous Path Forward plan

  2. Molecular basis for the mutagenic and lethal effects of ultraviolet irradiation. Progress report

    International Nuclear Information System (INIS)

    1977-01-01

    Pathways of DNA repair in bacteria and mammalian cells. Progress is reported on the following studies: genetic control of incision and excision in Escherichia coli; effects of binding proteins on the repair process in vitro; location of endonuclease - uv-irradiated DNA complexes; identification of eukaryotic repair mechanisms; nuclear complementation in HeLa cells; enzyme isolation from repair syndrome skin fibroblasts; and expression of the E. coli - SV40 hybrid DNA

  3. First progress report on the Japan Endoscopy Database project.

    Science.gov (United States)

    Kodashima, Shinya; Tanaka, Kiyohito; Matsuda, Koji; Fujishiro, Mitsuhiro; Saito, Yutaka; Ohtsuka, Kazuo; Oda, Ichiro; Katada, Chikatoshi; Kato, Masayuki; Kida, Mitsuhiro; Kobayashi, Kiyonori; Hoteya, Shu; Horimatsu, Takahiro; Matsuda, Takahisa; Muto, Manabu; Yamamoto, Hironori; Ryozawa, Shomei; Iwakiri, Ryuichi; Kutsumi, Hiromu; Miyata, Hiroaki; Kato, Mototsugu; Haruma, Ken; Fujimoto, Kazuma; Uemura, Naomi; Kaminishi, Michio; Tajiri, Hisao

    2018-01-01

    The Japan Endoscopy Database (JED) Project was started to develop the world's largest endoscopic database, capture the actual performance of endoscopic practice, and standardize the terminology and fundamental items needed for a clinical and research registry. This paper presents a progress report on the first phase of this project undertaken at eight endoscopic centers in Japan. The list of data items to be collected was drafted by the MSED-J (Minimal Standard Endoscopic Database) subcommittee. These items were aggregated offline by integrating data from two endoscopic filing systems between July 2015 and December 2015. The study population included all patients who underwent esophagogastroduodenoscopy or colonoscopy at all eight centers, patients who underwent enteroscopy at five of the eight centers, and patients who underwent endoscopic retrograde cholangiopancreatography (ERCP) at four of the eight centers. Data collected in this phase included 61 070 endoscopic procedures, of which 40 475 were esophagogastroduodenoscopies, 215 were enteroscopies, 19 204 were colonoscopies, and 1176 were ERCPs. Frequencies of complications were 0.68% for esophagogastroduodenoscopy, 0% for enteroscopy, 0.43% for colonoscopy, and 13.34% for ERCP. In addition, we obtained various data including Helicobacter pylori infection status, past history of endoscopy in patients who underwent enteroscopy or colonoscopy, and degree of difficulty of ERCP, although the frequencies of reporting were sometimes low, with some items <20%. Results of the first phase suggest that the JED project can provide vast quantities of useful data about endoscopic procedures. © 2017 Japan Gastroenterological Endoscopy Society.

  4. A simulation of 'schedule-cost' progress monitoring system in nuclear power project management

    International Nuclear Information System (INIS)

    Song Haitao; Huang Zhongping; Zhang Zemin; Wang Zikai

    2010-01-01

    The objective of project management is to find the optimal balance between progress and cost according to the project requirements. Traditional method always manages progress and cost separately. However, domestic and international experience indicated that the interactions between these two factors are crucial in the project implementation. Modern project managers have to manage and maintain a 'Progress - Cost' joint control framework. Such a model is applied into a sub-project of a nuclear power project using Simulink in this paper. It helps to identify and correct the deviations of the project. Earned Value Management is used by the project manager to quantify the cost of the project and progress of implementation. The budget plan value, actual value, earned value are three important parameters to measure cost and progress of the project. The experimental results illustrated that the method gives a more comprehensive performance evaluation of the project. (authors)

  5. Progress report on recommendations of the Flaring Project Team

    International Nuclear Information System (INIS)

    Macken, C.

    1999-01-01

    Part of the mandate of the Clean Air Strategic Alliance (CASA) is to share decision-making responsibility for air quality management with the government of Alberta, through the ministries of Environmental Protection, Energy, and Health, and the Alberta Energy and Utilities Board (EUB). CASA's vision for air quality in Alberta is that 'the air will be odourless, tasteless, look clear, and have no measurable short- or long-term adverse effects on people, animals, or the environment'. In 1997, CASA approved the establishment of the Flaring Project Team in response to public concern about potential and observed impacts associated with flaring of solution gas. Members of that team established a framework for the management of solution gas flaring. Their long-term goal is to eliminate routine flaring of solution gas. The Project Team assessed existing information on solution gas flaring, including technologies, efficiencies, emissions and impacts. Alternative technologies were also reviewed along with biological and health effects of solution gas flaring. A list of data gaps and research needs was compiled in order to help with the development of the Team's recommendations. The Team's final report was delivered in June 1998. It was recommended that the following policy objective hierarchy be used to guide decisions related to routine solution gas flaring: (1) eliminate routine solution gas flaring, (2) reduce volumes of gas flared, and (3) improve the efficiency of flares. By way of progress the Project Team was able to report that in March, 1999, the EUB issued a draft interim directive to address upstream petroleum industry flaring. The draft Directive incorporates the recommendations from the CASA Flaring Project Team with respect to management of solution gas flaring. In December 1998, changes to the royalty structure to encourage the productive use of flare gas have been announced by the Alberta Department of Energy and Alberta Environmental protection, thus

  6. Planning and progress of the WAGR decommissioning project

    International Nuclear Information System (INIS)

    Boorman, T.

    1988-01-01

    In the United Kingdom, the earliest production reactors, which will be decommissioned first, are of the Magnox type. The Windscale Advanced Gas-cooled Reactor, is however, sufficiently similar to make it a suitable prototype decommissioning project. The planning and progress so far is described. Special decommissioning equipment, including a remote dismantling machine, has been developed and a waste packaging building built on site. Its function is to enable all intermediate-level and low-level radioactive waste removed from the reactor vault by remote equipment to be packaged remotely into suitable containers. The work done on the WAGR decommissioning has shown that the dismantling of a power-producing reactor is feasible and can be accomplished using existing engineering techniques. (U.K.)

  7. Progress with the NESC spinning cylinder project and other NESC projects

    International Nuclear Information System (INIS)

    Wintle, J.B.; Hurst, R.C.; Hemsworth, B.

    1995-01-01

    The first international project (NESC I) of the Network of Evaluating Steel Components is a spinning cylinder, pressurized thermal shock (PTS) experiment. The main objective of the project is to validate the non-destructive evaluation and structural mechanics procedures for PWR reactor pressure vessels under PTS conditions. Contributing organizations world-wide will participate in this blind trial which embraces all aspects of structural integrity assessment. This paper describes the progress of the project to date, covering cylinder manufacture and inspection, materials evaluation, structural analysis and test instrumentation. It emphasizes the importance of networking global expertise in a managed framework and of the partnership, co-operation and teamwork developed by the contributing organizations through the five Task Groups constituting the NESC I. Finally, five new initiatives for projects managed by the Network are currently under review and described in this paper

  8. Progress with the NESC spinning cylinder project and other NESC projects

    International Nuclear Information System (INIS)

    Wintle, J.B.; Hurst, R.C.; Hemsworth, B.

    1995-01-01

    The first international project (NESC I) of the Network for Evaluating Steel Components is a spinning cylinder, pressurized thermal shock (PTS) experiment. The main objective of the project is to validate the non-destructive evaluation and structural mechanics procedures for PWR reactor pressure vessels under PTS conditions. Contributing organizations world-wide will participate in this blind trial which embraces all aspects of structural integrity assessment. This paper describes the progress of the project to date, covering cylinder manufacture and inspection, materials evaluation, structural analysis and test instrumentation. It emphasises the importance of networking global expertise in a managed framework and of the partnership, co-operation and teamwork developed by the contributing organizations through the five Task Groups constituting NESC I. Finally, five new initiatives for projects managed by the Network are currently under review and described in this paper. (author). 2 refs, 6 figs

  9. Cell cycle progression in irradiated endothelial cells cultured from bovine aorta

    International Nuclear Information System (INIS)

    Rubin, D.B.; Drab, E.A.; Ward, W.F.; Bauer, K.D.

    1988-01-01

    Logarithmically growing endothelial cells from bovine aortas were exposed to single doses of 0-10 Gy of 60Co gamma rays, and cell cycle phase distribution and progression were examined by flow cytometry and autoradiography. In some experiments, cells were synchronized in the cell cycle with hydroxyurea (1 mM). Cell number in sham-irradiated control cultures doubled in approximately 24 h. Estimated cycle stage times for control cells were 14.4 h for G1 phase, 7.2 h for S phase, and 2.4 h for G2 + M phase. Irradiated cells demonstrated a reduced distribution at the G1/S phase border at 4 h, and an increased distribution in G2 + M phase at 24 h postirradiation. Autoradiographs of irradiated cells after continuous [3H]thymidine labeling indicated a block in G1 phase or at the G1/S-phase border. The duration of the block was dose dependent (2-3 min/cGy). Progression of the endothelial cells through S phase after removal of the hydroxyurea block also was retarded by irradiation, as demonstrated by increased distribution in early S phase and decreased distribution in late S phase. These results indicate that progression of asynchronous cultured bovine aortic endothelial cells through the DNA synthetic cycle is susceptible to radiation inhibition at specific sites in the cycle, resulting in redistribution and partial synchronization of the population. Thus aortic endothelial cells, diploid cells from a normal tissue, resemble many immortal cell types that have been examined in this regard in vitro

  10. The Midwifery Legacies Project: history, progress, and future directions.

    Science.gov (United States)

    Moore-Davis, Tonia L; McGee, Karen B; Moore, Elaine M; Paine, Lisa L

    2015-01-01

    The Midwifery Legacies Project, formerly known as the OnGoing Group, was founded as an annual greeting card outreach aimed at maintaining contact with midwives as they approached retirement and beyond. In 2009, the importance of documenting personal and professional stories of midwives arose out of a bequest by a midwife who was relatively unknown outside of the community she served. The result has been the evolution of a robust collection of stories, which are known as the 20th Century Midwife Story Collection. Between 2009 and 2014, more than 120 US midwives aged 65 years or older were interviewed by a midwife, a student midwife, or a professional filmmaker. Collectively, these midwives' stories offer an intimate snapshot of the social, political, and cultural influences that have shaped US midwifery during the past half century. Individually, the stories honor and recognize midwives' contributions to the profession and the women they have served. This article details the development, progress, and future directions of the Midwifery Legacies Project. © 2015 by the American College of Nurse-Midwives.

  11. Progress of the Hanford Bulk Vitrification Project ICVTM Testing Program

    International Nuclear Information System (INIS)

    Witwer, K.S.; Woolery, D.W.; Dysland, E.J.

    2006-01-01

    In June 2004, the Bulk Vitrification Project was initiated with the intent to engineer, construct and operate a full-scale bulk vitrification pilot-plant to treat low-activity tank waste from Hanford tank 241-S-109. The project, managed by CH2M HILL Hanford Group, Inc., and performed by AMEC Earth and Environmental, Inc. (AMEC), will develop and operate a full-scale demonstration facility to exhibit the effectiveness of the bulk vitrification process under actual operating conditions. Since project initiation, testing has been undertaken using crucible-scale, 1/6 linear (engineering) scale, and full-scale vitrification equipment. Crucible-scale testing, coupled with engineering-scale testing, helps establish process limitations of selected glass formulations. Full-scale testing provides critical design verification of the In Container Vitrification (ICV) TM process both prior to and during operation of the demonstration facility. Beginning in late 2004, several full-scale tests have been performed at AMEC's test site, located adjacent to the U.S. Department of Energy's Hanford Site, in Richland, WA. Early testing involved verification of melt startup methodology, followed by subsequent full-melt testing to validate critical design parameters and demonstrate the 'Bottom-Up, Feed While Melt' process. As testing has progressed, design improvements have been identified and incorporated into each successive test. Full scale testing at AMEC's test site is currently scheduled to complete in 2006, with continued full-scale operational testing at the demonstration facility on the Hanford Site starting in 2007. Additional engineering scale testing will validate recommended glass formulations that have been provided by the Pacific Northwest National Laboratory (PNNL). This testing is expected to continue through 2006. This paper discusses the progress of the full-scale and engineering scale testing performed to date. Crucible-scale testing, a critical step in developing

  12. Progress report: Bangladesh [CSC Project on Management of Water Hyacinth

    International Nuclear Information System (INIS)

    Haider, S.Z.

    1981-01-01

    The CSC Project on Management of Water Hyacinth in Bangladesh was started in only April 1981. The present report from Bangladesh is based on the interim progress reports, submitted by the project coordinators of the organizations concerned, for the work during the short intervening period to 4th June 1981. It is obvious that the report deals mainly with the preliminary preparations and observations on the various aspects of the investigations. The research components assigned to various organisations in Bangladesh are: Bangladesh University of Engineering and Technology; - Growth rate and biogas production; Housing and Building Research Institute; - Paper and board, and biogas; Bangladesh Council of Scientific and Industrial Research - Protein, enzymes and ammoacids; Dacca University - Pollution removal and studies of biomass production. Bangladesh is a flat deltaic plain formed from old and new alluvium. The areas of old alluvium are located above the general level, while the vast areas of new alluvium are situated m the flood plain of the modern rivers. The whole country is intersected by a network of rivers; the areas comprising the alluvial plains are very large. The river bank levees are high and the land gradually slopes inland away from the levees. The tract of land between two rivers are shaped like a furrow and in most cases form elongated 'beels' or swamps which are ideal place for the growth and propagation of aquatic plants particularly water hyacinth along with other aquatic organisms, both of plant and animal origin due to eutrophication. It is in the shallow swamps and derelict ponds that luxuriant growth and proliferation of water hyacinth is generally observed in Bangladesh. However, there is a feeling that much of the water hyacinth population in the open countryside was depleted during the severe drought which prevailed during the summer of 1979. But Bangladesh has the ideal water and climatic environment for conditions of rapid growth and spread

  13. The 150 ns detector project: progress with small detectors

    International Nuclear Information System (INIS)

    Warburton, W.K.; Russell, S.R.; Kleinfelder, Stuart A.; Segal, Julie

    1994-01-01

    This project's long term goal is to develop a pixel area detector capable of 6 MHz frame rates (150 ns/frame). Our milestones toward this goal are: a single pixel, 1x256 1D and 8x8 2D detectors, 256x256 2D detectors and, finally, 1024x1024 2D detectors. The design strategy is to supply a complete electronics chain (resetting preamp, selectable gain amplifier, analog-to-digital converter (ADC), and memory) for each pixel. In the final detectors these will all be custom integrated circuits. The front end preamplifiers are being integrated first, since their design and performance are both the most unusual and also critical to the project's success. Similarly, our early work is also concentrating on devising and perfecting detector structures which are thick enough (1 mm) to absorb over 99% of the incident X-rays in the energy range of interest. In this paper we discuss our progress toward the 1x256 1D and 8x8 2D detectors. We have fabricated sample detectors at Stanford's Center for Integrated Systems and are preparing both to test them individually and to wirebond them to the preamplifier samples to produce our first working small 1D and 2D detectors. We will describe our solutions to the design problems associated with collecting charge in less than 30 ns from 1 mm thick pixels in high resistivity silicon. We have constructed and tested the front end of our preamplifier design using a commercial 1.2 μm CMOS technology and are moving on to produce a few channels of the complete preamplifier, including a switchable gain stage and output stage. We will discuss both the preamplifier design and our initial test results. ((orig.))

  14. The 150 ns detector project: progress with small detectors

    Energy Technology Data Exchange (ETDEWEB)

    Warburton, W.K. (X-ray Instrumentation Associates, 2513 Charleston Rd, Ste 207, Mountain View, CA 94043 (United States)); Russell, S.R. (X-ray Instrumentation Associates, 2513 Charleston Rd, Ste 207, Mountain View, CA 94043 (United States)); Kleinfelder, Stuart A. (VLSI Physics, 19 Drury Lane, Berkeley, CA 94705 (United States)); Segal, Julie (Integrated Ckts Lab., Dept. of Electrical Engineering, Stanford University, Stanford, CA 94305 (United States))

    1994-09-01

    This project's long term goal is to develop a pixel area detector capable of 6 MHz frame rates (150 ns/frame). Our milestones toward this goal are: a single pixel, 1x256 1D and 8x8 2D detectors, 256x256 2D detectors and, finally, 1024x1024 2D detectors. The design strategy is to supply a complete electronics chain (resetting preamp, selectable gain amplifier, analog-to-digital converter (ADC), and memory) for each pixel. In the final detectors these will all be custom integrated circuits. The front end preamplifiers are being integrated first, since their design and performance are both the most unusual and also critical to the project's success. Similarly, our early work is also concentrating on devising and perfecting detector structures which are thick enough (1 mm) to absorb over 99% of the incident X-rays in the energy range of interest. In this paper we discuss our progress toward the 1x256 1D and 8x8 2D detectors. We have fabricated sample detectors at Stanford's Center for Integrated Systems and are preparing both to test them individually and to wirebond them to the preamplifier samples to produce our first working small 1D and 2D detectors. We will describe our solutions to the design problems associated with collecting charge in less than 30 ns from 1 mm thick pixels in high resistivity silicon. We have constructed and tested the front end of our preamplifier design using a commercial 1.2 [mu]m CMOS technology and are moving on to produce a few channels of the complete preamplifier, including a switchable gain stage and output stage. We will discuss both the preamplifier design and our initial test results. ((orig.))

  15. [Alaskan commodities irradiation project: An options analysis study

    International Nuclear Information System (INIS)

    Zarling, J.P.; Swanson, R.B.; Logan, R.R.

    1989-09-01

    The ninety-ninth US Congress commissioned a six-state food irradiation research and development program to evaluate the commercial potential of this technology. Hawaii, Washington, Iowa, Oklahoma and Florida as well as Alaska have participated in the national program; various food products including fishery products, red meats, tropical and citrus fruits and vegetables have been studied. The purpose of the Alaskan study was to review and evaluate those factors related to the technical and economic feasibility of an irradiator in Alaska. This options analysis study will serve as a basis for determining the state's further involvement in the development of food irradiation technology

  16. Contracts for field projects and supporting research on enhanced oil recovery. Progress review number 87

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-10-01

    Approximately 30 research projects are summarized in this report. Title of the project, contract number, company or university, award amount, principal investigators, objectives, and summary of technical progress are given for each project. Enhanced oil recovery projects include chemical flooding, gas displacement, and thermal recovery. Most of the research projects though are related to geoscience technology and reservoir characterization.

  17. The latest progress of TILLING technique and its prospects in irradiation mutation breeding

    International Nuclear Information System (INIS)

    Du Yan; Yu Lixia; Liu Qingfang; Zhou Libin; Li Wenjian

    2011-01-01

    TILLING (Targeting Induced Local Lesions IN Genomes) is a novel, high-throughput and low-cost reverse genetics technique. In recent years, with innovation of the mutation screening techniques, TILLING platform has become more diversified, which makes the operation of TILLING technique more simple and rapid. For this reason, it is widely used in crop breeding research. In this paper, we summarized the latest progress of TILLING technique, meanwhile, we also discussed the prospect of combining irradiation mutation with the high-throughput TILLING technique in mutation breeding. (authors)

  18. Riboflavin and ultraviolet A irradiation for the prevention of progressive myopia in a guinea pig model.

    Science.gov (United States)

    Li, Xiaoxia; Wu, Miaoqin; Zhang, Luyi; Liu, Hui; Zhang, Lan; He, Jinjing

    2017-12-01

    In this study, we evaluated the effect of oral administration of riboflavin combined with whole-body ultraviolet A (UVA) irradiation on the biochemical and biomechanical properties of sclera in a guinea pig model to control the progression of myopia. Experimental groups were administered 0.1% riboflavin solution with or without vitamin C by gavage from 3 days before myopic modeling and during the modeling process. Guinea pigs underwent 30 min of whole-body UVA irradiation after each gavage for 2 weeks. For control groups, guinea pigs were administered vitamin C and underwent either whole-body UVA irradiation without 0.1% riboflavin solution or whole-body fluorescent lamp irradiation with or without 0.1% riboflavin solution. Resultantly, myopia models were established with an increased axial length and myopic diopter. Compared with myopic eyes in the control groups, the net increase in axial length, diopter and strain assessment decreased significantly, and the net decrease in sclera thickness, ultimate load, and stress assessment decreased significantly in experimental groups. MMP-2 expression showed a lower net increase, while TIMP-2 expression showed a lower net decrease. In addition, hyperplasia of scleral fibroblasts was more active in myopic eyes of experimental groups. Overall, our results showed that oral administration of riboflavin with whole-body UVA irradiation could increase the strength and stiffness of sclera by altering the biochemical and biomechanical properties, and decreases in axial elongation and myopic diopter are greater in the guinea pig myopic model. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  19. Investigation of irradiation strengthening of bcc metals and their alloys. Progress report, January 1977--October 1977

    International Nuclear Information System (INIS)

    1977-01-01

    Progress is reported in the areas of (a) the effect of neutron damage on the dislocation kinetics in bcc metals and their alloys, and (b) the effect of 3 He on the deformation characteristics of body centered cubic metals and their alloys. Results obtained from these projects are discussed

  20. Current status of food irradiation in overseas (2013). From the meeting report of RCA food irradiation project

    International Nuclear Information System (INIS)

    Todoriki, Setsuko

    2013-01-01

    The report introduces the activity of RCA (Regional Cooperative Agreement for Research Development and Training Related to Nuclear Science and Technology for Asia and Pacific) food irradiation project (RAS/5/057) and information obtained at the two workshops on current status of Asia and Pacific areas together with EU, USA and Japan. Also current trends of RAS/5/057 Implementing Best Practices for food irradiation for plant sanitary and phytosanitary purposes are described. Amount of food irradiation products of RCA member countries, minimum adopted doses for quarantine harmful insects (70 to 232 Gy) and import amount of fruits of USA (79 to 5500 tons) are tabulated. Finally current status of Japan is explained. (S. Ohno)

  1. Progress Report on Disassembly and Post-Irradiation Experiments for UCSB ATR-2 Experiment

    Energy Technology Data Exchange (ETDEWEB)

    Nanstad, Randy K [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Odette, G. R. [Univ. of California, Santa Barbara, CA (United States); Robertson, Janet Pawel [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Yamamoto, T [Univ. of California, Santa Barbara, CA (United States)

    2015-09-01

    The reactor pressure vessel (RPV) in a light-water reactor (LWR) represents the first line of defense against a release of radiation in case of an accident. Thus, regulations that govern the operation of commercial nuclear power plants require conservative margins of fracture toughness, both during normal operation and under accident scenarios. In the unirradiated condition, the RPV has sufficient fracture toughness such that failure is implausible under any postulated condition, including pressurized thermal shock (PTS) in pressurized water reactors (PWR). In the irradiated condition, however, the fracture toughness of the RPV may be severely degraded, with the degree of toughness loss dependent on the radiation sensitivity of the materials. As stated in previous progress reports, the available embrittlement predictive models, e.g. [1], and our present understanding of radiation damage are not fully quantitative, and do not treat all potentially significant variables and issues, particularly considering extension of operation to 80y.

  2. Alloy development for irradiation performance. Semiannual progress report for period ending September 30, 1985

    International Nuclear Information System (INIS)

    1986-02-01

    This report is the twenty-second in a series of Technical Progress Reports on ''Alloy Development for Irradiation Performance'' (ADIP), which is one element of the Fusion Reactor Materials Program, conducted in support of the magnetic Fusion Energy Program of the US Department of energy. This report is organized along topical lines with Chapters 3 through 8 devoted to the various alloy classes that are currently under investigation. Thus the work of a given laboratory may appear at several different places in the report. The materials compatibility and environmental effects work on all alloy classes is collected together in Chapter 9. The Table of Contents is annotated for the convenience of the reader

  3. Massachusetts Crystalline Repository Project. Progress report, December 31, 1985

    International Nuclear Information System (INIS)

    1985-01-01

    Project activities which have been undertaken include the following: review and comment on OCRD projects reports; review of pertinent DOE, NRC, EPA, and DOT quidelines and regulations; review of reports and maps released by the federal project group and contractors; attendance at DOE workshops and conferences; implementation of state-specific research activities; interaction with representatives of federal agencies and other participating states; and interface with media, state officials and legislators, and interested citizens

  4. Irradiation project of SiC/SiC fuel pin 'INSPIRE': Status and future plan

    International Nuclear Information System (INIS)

    Kohyama, Akira; Kishimoto, Hirotatsu

    2015-01-01

    After the March 11 Disaster in East-Japan, Research and Development towards Ensuring Nuclear Safety Enhancement for LWR becomes a top priority R and D in nuclear energy policy of Japan. The role of high temperature non-metallic materials, such as SiC/SiC, is becoming important for the advanced nuclear reactor systems. SiC fibre reinforced SiC composite has been recognised to be the most attractive option for the future, now, METI fund based project, INSPIRE, has been launched as 5-year termed project at OASIS in Muroran Institute of Technology aiming at early realisation of this system. INSPIRE is the irradiation project of SiC/SiC fuel pins aiming to accumulate material, thermal, irradiation effect data of NITE-SiC/SiC in BWR environment. Nuclear fuel inserted SiC/SiC fuel pins are planned to be installed in the Halden reactor. The project includes preparing the NITE-SiC/SiC tubes, joining of end caps, preparation of rigs to control the irradiation environment to BWR condition and the instruments to measure the condition of rigs and pins in operation. Also, basic neutron irradiation data will be accumulated by SiC/SiC coupon samples currently under irradiation in BR2. The output from this project may present the potentiality of NITE-SiC/SiC fuel cladding with the first stage fuel-cladding interaction. (authors)

  5. Projects at the component development and integration facility. Quarterly technical progress report, April 1, 1994--June 30, 1994

    International Nuclear Information System (INIS)

    1994-01-01

    This quarterly technical progress report presents progress on the projects at the Component Development and Integration Facility (CDIF) during the third quarter of FY94. The CDIF is a major Department of Energy test facility in Butte, Montana, operated by MSE, Inc. Projects in progress include: Biomass Remediation Project; Heavy Metal-Contaminated Soil Project; MHD Shutdown; Mine Waste Technology Pilot Program; Plasma Projects; Resource Recovery Project; and Spray Casting Project

  6. Project for the completion of a probabilistic safety analysis of an industrial irradiation

    International Nuclear Information System (INIS)

    Ferro, R.; Troncoso, M.

    1995-01-01

    The probabilistic safety analysis is a very valuable instrument in safety studies of facilities with potential risk for the personnel, population and environment. One of the possible field of use of PSA techniques in the safety studies for industrial irradiation where serious accidents have occurred. For this reason a project has been undertaken to carry out the PSA in the Irradiation Plant of Research Institute of the Food Industry, which complements the safety studies of this facility

  7. Projected beam irradiation at low latitudes using Meteonorm database

    DEFF Research Database (Denmark)

    Hatwaambo, Sylvester; Perers, Bengt; Karlsson, Björn

    2009-01-01

    by a collector provided the projection angle lies within the acceptance angle. The Meteonorm method of calculating solar radiation on any arbitrary oriented surface uses the globally simulated meteorological databases. Meteonorm has become a valuable too for estimating solar radiation where measured solar...... radiation data is missing or irregular. In this paper we present the projected beam solar radiation at low latitudes based on the standard Meteonorm calculations. The conclusion is that there is potential in using solar concentrators at these latitudes since the projected beam radiation is more during...

  8. [Shippingport Station Decommissioning Project]: FY 1987 annual progress report, October 1, 1986-September 30, 1987

    International Nuclear Information System (INIS)

    1988-01-01

    This report presents progress on the Shippingport Station Decommissioning Project for FY 1987. There are two main topics: Project Management and Decommissioning Project Activities. Changes from technical and managerial concepts developed in the original Decommissioning Plan are presented with the related technical, economic, or schedule considerations. 3 refs., 9 figs., 4 tabs

  9. UK Safeguards R and D Project progress report for the period July 1983 - April 1984

    International Nuclear Information System (INIS)

    Adams, J.M.

    1984-10-01

    Progress reports are presented on the following projects: centrifuge enrichment plant safeguards; stores safeguards and general accounting techniques; generic programmes (projects underlying many instrument systems (e.g. tamper proofing and indication; neutron interrogation systems); system studies); FBR fuel cycle safeguards; service programmes (services to the IAEA); exploratory and short projects. (U.K.)

  10. Shippingport Station Decommissioning Project: FY 1986 annual progress report, October 1, 1985 through September 30, 1986

    International Nuclear Information System (INIS)

    1987-01-01

    This report presents progress on the Shippingport Station Decommissioning Project for FY 1986. There are two main topics: Project Management and Decommissioning Project Activities. Changes from technical and managerial concepts developed in the original Decommissioning Plan are presented with the related technical, economic, or schedule considerations. 9 refs., 4 figs., 3 tabs

  11. Shippingport Station Decommissioning Project: FY 1988 annual progress report, October 1, 1987--September 30, 1988

    International Nuclear Information System (INIS)

    1989-01-01

    This report presents progress on the Shippingport Station Decommissioning Project for FY 1988. There are two main topics: Project Management and Decommissioning Project Activities. Changes from technical and managerial concepts developed in the original Decommissioning Plan are presented with the related technical, economic, or schedular considerations. 4 refs., 17 figs., 2 tabs

  12. SEAFOODplus: objectives, outputs, progress since the completion of the project

    DEFF Research Database (Denmark)

    Børresen, Torger

    the human nutrition area one project pointed toward new information indicating that fish protein has been overlooked as a key factor for human nutrition. When male individuals received a hypocaloric diet for weight reduction, the weight loss was significantly higher when the diet contained fish...... for delivering high amounts of essential nutrients, e.g. selenium, through optimal feed formulations, thus using fish as a carrier of important nutrients in the human diet. Traceability was a project area cutting across all the other areas within the SEAFOODplus project. New methods for implementing full...

  13. In Situ analysis of CO2 laser irradiation on controlling progression of erosive lesions on dental enamel.

    Science.gov (United States)

    Lepri, Taísa Penazzo; Scatolin, Renata Siqueira; Colucci, Vivian; De Alexandria, Adílis Kalina; Maia, Lucianne Cople; Turssi, Cecília Pedroso; Corona, Silmara Aparecida Milori

    2014-08-01

    The present study aimed to evaluate in situ the effect of CO2 laser irradiation to control the progression of enamel erosive lesions. Fifty-six slabs of bovine incisors enamel (5 × 3 × 2.5 mm(3) ) were divided in four distinct areas: (1) sound (reference area), (2) initial erosion, (3) treatment (irradiated or nonirradiated with CO2 laser), (4) final erosion (after in situ phase). The initial erosive challenge was performed with 1% citric acid (pH = 2.3), for 5 min, 2×/day, for 2 days. The slabs were divided in two groups according to surface treatment: irradiated with CO2 laser (λ = 10.6 µm; 0.5 W) and nonirradiate. After a 2-day lead-in period, 14 volunteers wore an intraoral palatal appliance containing two slabs (irradiated and nonirradiated), in two intraoral phases of 5 days each. Following a cross-over design during the first intraoral phase, half of the volunteers immersed the appliance in 100 mL of citric acid for 5 min, 3×/day, while other half of the volunteers used deionized water (control). The volunteers were crossed over in the second phase. Enamel wear was determined by an optical 3D profilometer. Three-way ANOVA for repeated measures revealed that there was no significant interaction between erosive challenge and CO2 laser irradiation (P = 0.419). Erosive challenge significantly increased enamel wear (P = 0.001), regardless whether or not CO2 laser irradiation was performed. There was no difference in enamel wear between specimens CO2 -laser irradiated and non-irradiated (P = 0.513). Under intraoral conditions, CO2 laser irradiation did not control the progression of erosive lesions in enamel caused by citric acid. © 2014 Wiley Periodicals, Inc.

  14. Long-term results of irradiation for patients with progressive GRAVES' ophthalmopathy

    International Nuclear Information System (INIS)

    Marquez, Sheri D.; Lum, Bert L.; McDougall, I. Ross; Katkuri, Shobha; Levin, Peter S.; MacManus, Michael; Donaldson, Sarah S.

    2001-01-01

    Purpose: To determine the long-term outcome of radiotherapy (RT) in patients with progressively symptomatic thyroid eye disease and to evaluate the potential long-term sequelae. Methods and Materials: Four hundred fifty-three patients provided written informed consent and received retrobulbar RT for Graves' ophthalmopathy at Stanford University Medical Center; 197 with ≥1 year of follow-up were retrospectively analyzed. Of the 197 patients, 189 received RT to the bilateral retrobulbar regions, and 4 received unilateral RT. The technical information was unavailable for 4 patients. Patients were assessed by chart review, telephone interview, questionnaire, and multidisciplinary physician examination. Eye impairment was scored using the SPECS system. The end point review included the before and after treatment SPECS score, surgical intervention, and patient satisfaction. Potential complications, including cataract development, retinopathy, and tumor formation, were investigated. Multivariate analyses were performed to assess the prognostic variables. Results: Improvement or resolution was 89% for soft-tissue findings; 70% for proptosis; 85% for extraocular muscle dysfunction; 96% for corneal abnormalities; and 67% for sight loss. The response to RT may take >6 months to stabilize. Factors predictive of response varied in the individual SPECS categories but included the initial SPECS score, pretreatment thyroid status, female gender, a 20-Gy RT dose, and a history of hypertension. Nonpredictive factors included a history of tobacco use, diabetes mellitus, steroids, and prior cataracts. Only 16% required surgical intervention to preserve their vision or restore binocular vision. Twenty-two patients (12%) developed cataracts after irradiation (median 11 years). No patient developed a tumor within the RT field during the follow-up period (range 1-29 years). Ninety-eight percent of patients were pleased with their results, and 2% believed their symptoms progressed

  15. Progress Report of the Schools Television Research Project--III

    Science.gov (United States)

    Kemelfield, Graeme

    1969-01-01

    "This concluding article provides the first published account of a series of psychological experiments which are presently being undertaken by the Schools Television Research Project, examining presentation factors in instructional television. (Editor)

  16. Differential S-phase progression after irradiation of p53 functional versus non-functional tumour cells

    Directory of Open Access Journals (Sweden)

    Zölzer Friedo

    2014-12-01

    Full Text Available Background. Many pathways seem to be involved in the regulation of the intra-S-phase checkpoint after exposure to ionizing radiation, but the role of p53 has proven to be rather elusive. Here we have a closer look at the progression of irradiated cells through S-phase in dependence of their p53 status.

  17. Construction progress of the cooling & ventilation in the LHC project

    CERN Document Server

    Body, Y; Josa, F; Monsted, A; Pirollet, B; CERN. Geneva. ST Division

    2002-01-01

    After the LEP dismantling Phase the Cooling and Ventilation Group has started the LHC construction work. Year 2001 through to 2004 will certainly be the most important period of activity for the CV group in the erection phase The author will report on the current works that are in progress on the different LHC Points distinguishing between the Ventilation and the Water Cooling installations. The Ventilation work completed in the new surface buildings in Points 1, 4,5,6 and 8. The work for the Cooling plants comprehend to the pumping stations, the cooling towers and the chilled water production stations in Points 1 and 5, For all of these activities, an updated report of the progress the work, the planning and of the expenses are given. Finally, a brief overview of the future activities is presented.

  18. Progress, status, and plans for the HRIBF project

    International Nuclear Information System (INIS)

    Auble, R.L.; Alton, G.D.; Bailey, J.D.

    1995-01-01

    Over the last three years, the Holifield accelerator system has been reconfigured into a first-generation radioactive ion beam facility, the HRIBF, a national user facility for RIB research. The construction and reconfiguration have been completed and the equipment commissioning and beam development phases have started. The progress to date, the present status, and future plans will be given. The special problems connected with the production and acceleration of RIBs will be discussed

  19. Jules Horowitz reactor - presentation of the project and progress report

    International Nuclear Information System (INIS)

    Ballagny, A.; Frachet, S.; Rommens, M.; Guigon, B.; Minguet, J.L.; Dupuy, J.P.; Leydier, C.

    2001-01-01

    The RJH project was launched by CEA some years ago, with the objective to replace, after 2010, the material testing reactors of the previous generation. The objectives are also: to realise a significant step in term of performances, to ensure a high flexibility of the design, in order to host in the future new experiments, which are not completely defined at the project stage, to reach a high level of safety, according to the best current practice. After a summary of the main experimental objectives of the facility, the present paper deals with a detailed technical presentation of the project, resulting from preliminary design studies. The following topics are covered successively: the main functionalities, the resulting design options and technical solutions, the layout of the nuclear facility. (orig.)

  20. Progress and achievements of the ITER L-4 blanket project

    International Nuclear Information System (INIS)

    Daenner, W.; Toschi, R.; Cardella, A.

    1999-01-01

    The L-4 Blanket Project embraces the R and D of the ITER Shielding Blanket, and its main objective is the fabrication of prototype components. This paper summarises the main conclusions from the materials R and D and the development of technologies which were required for the prototype specifications and manufacturing. The main results of the ongoing testing activities, and of the component manufacture are outlined.The main objectives of the project have been achieved including improvements of the material properties and of joining technologies, which resulted in good component quality and high performance in qualification tests. (author)

  1. Progress and achievements of the ITER L-4 blanket project

    International Nuclear Information System (INIS)

    Daenner, W.; Toschi, R.; Cardella, A.

    2001-01-01

    The L-4 Blanket Project embraces the R and D of the ITER Shielding Blanket, and its main objective is the fabrication of prototype components. This paper summarises the main conclusions from the materials R and D and the development of technologies which were required for the prototype specifications and manufacturing. The main results of the ongoing testing activities, and of the component manufacture are outlined. The main objectives of the project have been achieved including improvements of the material properties and of joining technologies, which resulted in good component quality and high performance in qualification tests. (author)

  2. 7 CFR 3405.19 - Monitoring progress of funded projects.

    Science.gov (United States)

    2010-01-01

    ... RESEARCH, EDUCATION, AND EXTENSION SERVICE, DEPARTMENT OF AGRICULTURE HIGHER EDUCATION CHALLENGE GRANTS... reform, and opportunities to enhance dissemination of exemplary end products/results. (b) An Annual..., including: A review of project objectives and accomplishments; a description of any products and outcomes...

  3. Savanna ecosystem project: phase I summary and phase II progress

    CSIR Research Space (South Africa)

    Huntely, BJ

    1978-07-01

    Full Text Available A summary of the results of the first phase (mid 1974 to mid 1976) of the South African Savanna Ecosystem Project being undertaken at Nylsvley in the northern Transvaal is presented. Phase I of this ten year study of the structure and functioning...

  4. Peanut (Arachis hypogaea Expressed Sequence Tag Project: Progress and Application

    Directory of Open Access Journals (Sweden)

    Suping Feng

    2012-01-01

    Full Text Available Many plant ESTs have been sequenced as an alternative to whole genome sequences, including peanut because of the genome size and complexity. The US peanut research community had the historic 2004 Atlanta Genomics Workshop and named the EST project as a main priority. As of August 2011, the peanut research community had deposited 252,832 ESTs in the public NCBI EST database, and this resource has been providing the community valuable tools and core foundations for various genome-scale experiments before the whole genome sequencing project. These EST resources have been used for marker development, gene cloning, microarray gene expression and genetic map construction. Certainly, the peanut EST sequence resources have been shown to have a wide range of applications and accomplished its essential role at the time of need. Then the EST project contributes to the second historic event, the Peanut Genome Project 2010 Inaugural Meeting also held in Atlanta where it was decided to sequence the entire peanut genome. After the completion of peanut whole genome sequencing, ESTs or transcriptome will continue to play an important role to fill in knowledge gaps, to identify particular genes and to explore gene function.

  5. Progress on using deuteron-deuteron fusion generated neutrons for 40Ar/39Ar sample irradiation

    Science.gov (United States)

    Rutte, Daniel; Renne, Paul R.; Becker, Tim; Waltz, Cory; Ayllon Unzueta, Mauricio; Zimmerman, Susan; Hidy, Alan; Finkel, Robert; Bauer, Joseph D.; Bernstein, Lee; van Bibber, Karl

    2017-04-01

    We present progress on the development and proof of concept of a deuteron-deuteron fusion based neutron generator for 40Ar/39Ar sample irradiation. Irradiation with deuteron-deuteron fusion neutrons is anticipated to reduce Ar recoil and Ar production from interfering reactions. This will allow dating of smaller grains and increase accuracy and precision of the method. The instrument currently achieves neutron fluxes of ˜9×107 cm-2s-1 as determined by irradiation of indium foils and use of the activation reaction 115In(n,n')115mIn. Multiple foils and simulations were used to determine flux gradients in the sample chamber. A first experiment quantifying the loss of 39Ar is underway and will likely be available at the time of the presentation of this abstract. In ancillary experiments via irradiation of K salts and subsequent mass spectrometric analysis we determined the cross-sections of the 39K(n,p)39Ar reaction at ˜2.8 MeV to be 160 ± 35 mb (1σ). This result is in good agreement with bracketing cross-section data of ˜96 mb at ˜2.45 MeV and ˜270 mb at ˜4 MeV [Johnson et al., 1967; Dixon and Aitken, 1961 and Bass et al. 1964]. Our data disfavor a much lower value of ˜45 mb at 2.59 MeV [Lindström & Neuer, 1958]. In another ancillary experiment the cross section for 39K(n,α)36Cl at ˜2.8 MeV was determined as 11.7 ± 0.5 mb (1σ), which is significant for 40Ar/39Ar geochronology due to subsequent decay to 36Ar as well as for the determination of production rates of cosmogenic 36Cl. Additional experiments resolving the cross section functions on 39K between 1.5 and 3.6 MeV are on their way using the LICORNE neutron source of the IPN Orsay tandem accelerator. Results will likely be available at the time of the presentation of this abstract. While the neutron generator is designed for fluxes of ˜109 cm-2s-1, arcing in the sample chamber currently limits the power—straightforwardly correlated to the neutron flux—the generator can safely be run at. Further

  6. 7 CFR 3402.23 - Documentation of progress on funded projects.

    Science.gov (United States)

    2010-01-01

    ... RESEARCH, EDUCATION, AND EXTENSION SERVICE, DEPARTMENT OF AGRICULTURE FOOD AND AGRICULTURAL SCIENCES... of Fellows supported by any special international study or thesis/dissertation research allowance and... Research Information System (CRIS). The CRIS database contains narrative project information, progress...

  7. Ceramic Technology Project. Semiannual progress report, April 1991--September 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    The Ceramic Technology Project was developed by the USDOE Office of Transportation Systems (OTS) in Conservation and Renewable Energy. This project, part of the OTS`s Materials Development Program, was developed to meet the ceramic technology requirements of the OTS`s automotive technology programs. Significant accomplishments in fabricating ceramic components for the USDOE and NASA advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. These programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. A five-year project plan was developed with extensive input from private industry. In July 1990 the original plan was updated through the estimated completion of development in 1993. The objective is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on the structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines. To facilitate the rapid transfer of this technology to US industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities.

  8. Influence of tumor grade on time to progression after irradiation for localized ependymoma in children

    International Nuclear Information System (INIS)

    Merchant, Thomas E.; Jenkins, Jesse J.; Burger, Peter C.; Sanford, Robert A.; Sherwood, Scot H.; Jones-Wallace, Dana; Heideman, Richard L.; Thompson, Stephen J.; Helton, Kathleen J.; Kun, Larry E.

    2002-01-01

    Purpose: To investigate the influence of histologic grade on progression-free survival (PFS) after irradiation (RT) for pediatric patients with localized ependymoma. Methods and Materials: Fifty patients with localized ependymoma (median age 3.6 years, range 1-18 years at the time of RT) were treated with RT between December 1982 and June 1999. Anaplastic features were identified in 14 of 50 patients. The extent of resection was characterized as gross-total in 36 patients, near-total in 5, and subtotal in 9. The median dose to the primary site was 54 Gy. Of the 50 patients, 23 received pre-RT chemotherapy. Results: Thirty-nine patients were alive at a median follow-up of 46 months (range 21-214) from diagnosis. Thirty-four patients remained progression free at a median follow-up of 35 months (range 13-183) after the initiation of RT. Progression occurred in 16 patients (12 local and 4 local and distant), with a median time to failure of 21.2 months (range 4.6-65.0). The tumor grade significantly influenced the PFS after RT (p<0.0005). The estimated 3-year PFS rate was 28%±14% for patients with anaplastic ependymoma compared with 84% ± 8% for patients with differentiated ependymoma. These results remained significant when corrected for age at diagnosis (<3 years), pre-RT chemotherapy, and extent of resection. Patients who received pre-RT chemotherapy had an inferior 3-year PFS estimate after RT (49±12%) compared with those who did not (84%±10%; p=0.056). Anaplastic ependymoma was found more frequently in the supratentorial brain (p=0.002). Six of 12 patients with supratentorial tumor developed recurrence; recurrence was restricted to patients with anaplastic ependymoma. Conclusion: Tumor grade influences outcome for patients with ependymoma independent of other factors and should be considered in the design and analysis of prospective trials involving pediatric patients treated with RT. Chemotherapy before RT influences the PFS and overall survival after RT. The

  9. Progress in resolving construction issues on nuclear projects

    International Nuclear Information System (INIS)

    Reedy, R.F.

    1985-01-01

    The cost of nuclear plant construction in the United States can be drastically reduced. Progress is being made in the reduction of construction costs and with continuing effort much more can be done. The easiest way to attack high costs is to eliminate the unnecessary repairs and rework in construction, along with the time consuming evaluations and dispositions, and to use common sense in design practices. By doing this, millions of dollars could easily be cut from the cost of construction of nuclear powerplants

  10. The Recon Pilot Project: A Progress Report, October 1970-May 1971

    Directory of Open Access Journals (Sweden)

    Henriette D. Avram

    1971-09-01

    Full Text Available Synopsis of three progress reports on the RECON Pilot Project submitted by the Library of Congress to the Council on Library Resources covering the period October 1970-May 1971. Progress is reported in the following areas: RECON production, foreign language editing test, format recognition, microfilming, input devices, and tasks assigned to the RECON Working Task Force.

  11. Aircraft Nuclear Propulsion Project Quarterly Progress Report for Period Ending December 31, 1956

    Energy Technology Data Exchange (ETDEWEB)

    NA, NA [ORNL

    1957-03-12

    This quarterly progress report of the Aircraft Nuclear Propulsion Project at ORNL records the technical progress of research on circulating-fuel reactors and other ANP research at the Laboratory. The report is divided into five major parts: 1) Aircraft Reactor Engineering, 2) Chemistry, and 3) Metallurgy, 4) Heat Transfer and Physical Properties, Radiation Damage, and Fuel Recovery and Reprocessing, and 5) Reactor Shielding.

  12. Progress report on the accelerator production of tritium materials irradiation program

    International Nuclear Information System (INIS)

    Maloy, S.A.; Sommer, W.F.; Brown, R.D.; Roberts, J.E.

    1997-01-01

    The Accelerator Production of Tritium (APT) project is developing an accelerator and a spoliation neutron source capable of producing tritium through neutron capture on He-3. A high atomic weight target is used to produce neutrons that are then multiplied and moderated in a blanket prior to capture. Materials used in the target and blanket region of an APT facility will be subjected to several different and mixed particle radiation environments; high energy protons (1-2 GeV), protons in the 20 MeV range, high energy neutrons, and low energy neutrons, depending on position in the target and blanket. Flux levels exceed 10 14 /cm 2 s in some areas. The APT project is sponsoring an irradiation damage effects program that will generate the first data-base for materials exposed to high energy particles typical of spallation neutron sources. The program includes a number of candidate materials in small specimen and model component form and uses the Los Alamos Spallation Radiation Effects Facility (LASREF) at the 800 MeV, Los Alamos Neutron Science Center (LANSCE) accelerator

  13. Staunton 1 Reclamation Demonstration Project. Progress report for 1977

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-12-01

    The Staunton 1 Reclamation Demonstration Project involves an evaluation of the reclamation process for a deep coal mine refuse system. A typical abandoned midwestern deep coal mine refuse site was selected, final land use was determined, baseline data were collected, engineering plans were developed and implemented, and a post-construction evaluation was begun. The project is a cooperative effort by two state agencies--the Abandoned Mined Land Reclamation Council of Illinois the Illinois Institute for Environmental Quality--and the U.S. Department of Energy through the Land Reclamation Program at Argonne National Laboratory. Current investigations are monitoring groundwater, surface water quality, aquatic ecosystems, revegetation, soil characteristics, erosion and runoff, soil microbial and soil fauna populations, wildlife, and economic effects of the reclamation effort. The research is a multidisciplinary approach to the concept of ecosystem response to reclamation.

  14. Milliwatt Generator Project. Progress report, April-September 1980

    International Nuclear Information System (INIS)

    Maraman, W.J.

    1981-01-01

    This formal biannual report covers the effort related to the Milliwatt Generator Project (MWG) carried out for the Department of Energy, Office of Military Applications, by the Los Alamos Scientific Laboratory (LASL). Most of the studies discussed here are of a continuing nature. Results and conclusions may change as the work continues. Published reference to the results cited in this report should not be made without the explicit permission of the person in charge of the work

  15. Oman- Decisive progress for the Liquefied Natural Gas (LNG) project

    International Nuclear Information System (INIS)

    Anon.

    1996-01-01

    The soon signature of a firm contract with the Korea Gas Corporation and the perspective of an agreement with Thailand will allow the attribution of a construction contract in September 1996. The hypothesis of a third liquefaction train seems to be more and more probable. The project of Oman-India gas pipeline is not given up but only put it back to several years. (N.C.)

  16. Advanced Neutron Source (ANS) Project Progress report, FY 1991

    International Nuclear Information System (INIS)

    Campbell, J.H.; Selby, D.L.; Harrington, R.M.; Thompson, P.B.

    1992-01-01

    This report discusses the following about the Advanced Neutron Source: Project Management; Research and Development; Fuel Development; Corrosion Loop Tests and Analyses; Thermal-Hydraulic Loop Tests; Reactor Control and Shutdown Concepts; Critical and Subcritical Experiments; Material Data, Structural Tests, and Analysis; Cold-Source Development; Beam Tube, Guide, and Instrument Development; Hot-Source Development; Neutron Transport and Shielding; I ampersand C Research and Development; Design; and Safety

  17. Project ZEUS: a field irradiator for small-mammal population studies

    International Nuclear Information System (INIS)

    Turner, B.N.; Iverson, S.L.

    1976-08-01

    The ZEUS (Zoological Environment Under Stress) Project will assess the effects of long-term low-level radiation on meadow vole populations in a northern temperate area through a series of replicated experimental irradiations. These rodent populations will live in grassland areas surrounded by forest, and will be exposed to a dose designed to be a maximum 6 R/day. (author)

  18. Plutonium Reclamation Facility incident response project progress report

    International Nuclear Information System (INIS)

    Austin, B.A.

    1997-01-01

    This report provides status of Hanford activities in response to process deficiencies highlighted during and in response to the May 14, 1997, explosion at the Plutonium Reclamation Facility. This report provides specific response to the August 4, 1997, memorandum from the Secretary which requested a progress report, in 120 days, on activities associated with reassessing the known and evaluating new vulnerabilities (chemical and radiological) at facilities that have been shut down, are in standby, are being deactivated or have otherwise changed their conventional mode of operation in the last several years. In addition, this report is intended to provide status on emergency response corrective activities as requested in the memorandum from the Secretary on August 28, 1997. Status is also included for actions requested in the second August 28, 1997, memorandum from the Secretary, regarding timely notification of emergencies

  19. Plutonium Reclamation Facility incident response project progress report

    Energy Technology Data Exchange (ETDEWEB)

    Austin, B.A.

    1997-11-25

    This report provides status of Hanford activities in response to process deficiencies highlighted during and in response to the May 14, 1997, explosion at the Plutonium Reclamation Facility. This report provides specific response to the August 4, 1997, memorandum from the Secretary which requested a progress report, in 120 days, on activities associated with reassessing the known and evaluating new vulnerabilities (chemical and radiological) at facilities that have been shut down, are in standby, are being deactivated or have otherwise changed their conventional mode of operation in the last several years. In addition, this report is intended to provide status on emergency response corrective activities as requested in the memorandum from the Secretary on August 28, 1997. Status is also included for actions requested in the second August 28, 1997, memorandum from the Secretary, regarding timely notification of emergencies.

  20. Advanced Neutron Source (ANS) Project progress report, FY 1994

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, J.H.; King-Jones, K.H. [eds.; Selby, D.L.; Harrington, R.M. [Oak Ridge National Lab., TN (United States); Thompson, P.B. [Martin Marietta Energy Systems, Inc., Oak Ridge, TN (United States). Central Engineering Services

    1995-01-01

    The President`s budget request for FY 1994 included a construction project for the Advanced Neutron Source (ANS). However, the budget that emerged from the Congress did not, and so activities during this reporting period were limited to continued research and development and to advanced conceptual design. A significant effort was devoted to a study, requested by the US Department of Energy (DOE) and led by Brookhaven National Laboratory, of the performance and cost impacts of reducing the uranium fuel enrichment below the baseline design value of 93%. The study also considered alternative core designs that might mitigate those impacts. The ANS Project proposed a modified core design, with three fuel elements instead of two, that would allow operation with only 50% enriched uranium and use existing fuel technology. The performance penalty would be 15--20% loss of thermal neutron flux; the flux would still just meet the minimum design requirement set by the user community. At the time of this writing, DOE has not established an enrichment level for ANS, but two advisory committees have recommended adopting the new core design, provided the minimum flux requirements are still met.

  1. Tunneling on the Yucca Mountain Project: Progress and lessons learned

    International Nuclear Information System (INIS)

    Hansmire, W.H.; Rogers, D.J.; Wightman, W.D.

    1996-01-01

    The Yucca Mountain Site Characterization Project is the US's effort to confirm the technical acceptability of Yucca Mountain as a repository for high-level nuclear waste. A key part of the site characterization project is the construction of a 7.8-km-long, 7.6-m-diameter tunnel for in-depth geologic and other scientific investigations. The work is governed in varying degrees by the special requirements for nuclear quality assurance, which imposes uncommon and often stringent limitations on the materials which can be used in construction, the tunneling methods and procedures used, and record-keeping for many activities. This paper presents the current status of what has been learned, how construction has adapted to meet the requirements, and how the requirements were interpreted in a mitigating way to meet the legal obligations, yet build the tunnel as rapidly as possible. With regard to design methodologies and the realities of tunnel construction, ground support with a shielded Tunnel Boring Machine is discussed. Notable lessons learned include the need for broad design analyses for a wide variety of conditions and how construction procedures affect ground support

  2. Advanced Neutron Source (ANS) Project progress report, FY 1994

    International Nuclear Information System (INIS)

    Campbell, J.H.; King-Jones, K.H.; Thompson, P.B.

    1995-01-01

    The President's budget request for FY 1994 included a construction project for the Advanced Neutron Source (ANS). However, the budget that emerged from the Congress did not, and so activities during this reporting period were limited to continued research and development and to advanced conceptual design. A significant effort was devoted to a study, requested by the US Department of Energy (DOE) and led by Brookhaven National Laboratory, of the performance and cost impacts of reducing the uranium fuel enrichment below the baseline design value of 93%. The study also considered alternative core designs that might mitigate those impacts. The ANS Project proposed a modified core design, with three fuel elements instead of two, that would allow operation with only 50% enriched uranium and use existing fuel technology. The performance penalty would be 15--20% loss of thermal neutron flux; the flux would still just meet the minimum design requirement set by the user community. At the time of this writing, DOE has not established an enrichment level for ANS, but two advisory committees have recommended adopting the new core design, provided the minimum flux requirements are still met

  3. Progress of the LASL dry hot rock geothermal energy project

    Science.gov (United States)

    Smith, M. C.

    1974-01-01

    The possibilities and problems of extracting energy from geothermal reservoirs which do not spontaneously yield useful amounts of steam or hot water are discussed. The system for accomplishing this which is being developed first is a pressurized-water circulation loop intended for use in relatively impermeable hot rock. It will consist of two holes connected through the hot rock by a very large hydraulic fracture and connected at the surface through the primary heat exchanger of an energy utilization system. Preliminary experiments in a hole 2576 ft (0.7852 km) deep, extending about 470 ft (143 m) into the Precambrian basement rock underlying the Jemez Plateau of north-central New Mexico, revealed no unexpected difficulties in drilling or hydraulically fracturing such rock at a temperature of approximately 100 C, and demonstrated a permeability low enough so that it appeared probable that pressurized water could be contained by the basement rock. Similar experiments are in progress in a second hole, now 6701 ft (2.043 km) deep, about 1.5 miles (2.4 km) south of the first one.

  4. Progress of the intense positron beam project EPOS

    International Nuclear Information System (INIS)

    Krause-Rehberg, R.; Brauer, G.; Jungmann, M.; Krille, A.; Rogov, A.; Noack, K.

    2008-01-01

    EPOS (the ELBE POsitron Source) is a running project to build an intense, bunched positron beam for materials research. It makes use of the bunched electron beam of the ELBE radiation source (Electron Linac with high Brilliance and low Emittance) at the Research Centre Dresden-Rossendorf (40 MeV, 1 mA). ELBE has unique timing properties, the bunch length is <5 ps and the repetition time is 77 ns. In contrast to other Linacs made for Free Electron Lasers (e.g., TTF at DESY, Hamburg), ELBE can be operated in full cw-mode, i.e., with an uninterrupted sequence of bunches. The article continues an earlier publication. It concentrates on details of the timing system and describes issues of radiation protection

  5. NEPA Project quarterly progress report, April 1--June 30, 1950

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1950-12-31

    Exploration of various types of power plant cycles for nuclear propelled aircraft has been continued during this quarter. The principal current objective of the project is the development of information which will make an intelligent choice of the basic power plant cycle possible. It is still hoped that this choice can be made late in 1950. The survey studies which have been under way for several months continued during the quarter. These consist of analyses and rough preliminary layouts for various types of aircraft, using each of the several basic cycles which have been seriously considered for each of the three phases of development. Although it is still extremely premature to discuss the relative merits of the various cycles, the information so for developed discloses some cycle differences which may, if confirmed by additional work, be significant. In this respect, there have been no recent major changes in the comparative standings of the cycles.

  6. Food irradiation

    International Nuclear Information System (INIS)

    Matsuyama, Akira

    1990-01-01

    This paper reviews researches, commentaries, and conference and public records of food irradiation, published mainly during the period 1987-1989, focusing on the current conditions of food irradiation that may pose not only scientific or technologic problems but also political issues or consumerism. Approximately 50 kinds of food, although not enough to fill economic benefit, are now permitted for food irradiation in the world. Consumerism is pointed out as the major factor that precludes the feasibility of food irradiation in the world. In the United States, irradiation is feasible only for spices. Food irradiation has already been feasible in France, Hollands, Belgium, and the Soviet Union; has under consideration in the Great Britain, and has been rejected in the West Germany. Although the feasibility of food irradiation is projected to increase gradually in the future, commercial success or failure depends on the final selection of consumers. In this respect, the role of education and public information are stressed. Meat radicidation and recent progress in the method for detecting irradiated food are referred to. (N.K.) 128 refs

  7. Progress Report 15, December 1979-April 1980, and proceedings of the fifteenth Project Integration Meeting

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    Progress made by the Low-Cost Solar Array Project during the period December 1979 to April 1980 is reported. Reports on project analysis and integration; technology development in silicon material, large-area silicon sheet and encapsulation; production process and equipment development; engineering; and operations are included. Also, a report on, and copies of visual presentations made at, the Project Integration Meeting held April 2 and 3, 1980, are included.

  8. Staunton 1 Reclamation Demonstration Project. Progress report II

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-07-01

    The Staunton 1 Reclamation Demonstration Project involves an evaluation of the reclamation process on a 13.8-ha abandoned deep coal mine refuse site in southwestern Illinois. The procedure included collection of preconstruction environmental data, determination of the site's final land use, and development and implementation of a detailed site development plan. Approximately 9.3 ha of refuse material was recontoured, covered with a minimum of 30 cm of soil obtained on site, and seeded with a mixture of grasses and legumes. Hydrologic investigation indicates some improvement in groundwater quality. Surface water quality also has shown improvement, but development of the aquatic ecosystem in the newly-constructed pond is slow. Revegetation has been successful, and a protective plant cover has been established on most areas of the site. Soil tests indicate that acceptable plant growth media have been constructed; however, continued application of fertilizer and limestone will probably be necessary to maintain the vegetation. The soil microbial community has achieved total numbers equal to those of old fields, but species' diversity is low. Small mammals, birds, reptiles, and amphibians have invaded and are utilizing the site. The economic value of the site and adjacent property has increased substantially, and the area's aesthetic value has been enhanced significantly. The two-year period of intensive monitoring and evaluation has been utilized to develop recommendations for improving the designs of future reclamation efforts.

  9. Progress of IFERC project in the Broader Approach Activities

    International Nuclear Information System (INIS)

    Araki, M.; Sakamoto, Y.; Hayashi, K.; Ohuchi, R.; Nishitani, T.

    2010-01-01

    For contributing to the ITER project and promoting a possible early realization of DEMO, since 2007 the International Fusion Energy Research Centre (IFERC) shall perform the activities on (1) DEMO Design and R and D Coordination, (2) Computational Simulation Centre, and (3) ITER Remote Experimentation Centre in the framework under the agreement between the Government of Japan and the European Atomic Energy Community for the joint implementation of the Broader Approach Activities in the field of fusion energy. The DEMO Design activity aims at establishing a common basis for DEMO Design, including design features of DEMO, possible common concepts of DEMO, a roadmap for DEMO, and so on. Based on the common interest of EU and Japan toward DEMO, the DEMO R and D activities have been planned and carried out for the areas which are related to DEMO blanket development: SiC/SiC composites, tritium technology, materials engineering, advanced neutron multiplier, and advanced tritium breeders for DEMO blanket. In the activity of the Computational Simulation Centre, the objective is to provide and exploit a supercomputer for large scale simulation activities to analyse experimental data on fusion plasmas, prepare scenarios for ITER operation, predict the performance of the ITER facilities and contribute to the DEMO Design.

  10. The New Progress of the Starry Sky Project of China

    Science.gov (United States)

    Wang, Xiaohua

    2015-08-01

    Since the 28th General Assembly of IAU, the SSPC team made new progress:1. Enhanced the function of the SSPC team-- Established the contact with IAU C50, IUCN Dark Skies Advisory Group, AWB and IDA,and undertakes the work of the IDA Beijing Chapter.-- Got supports from China’s National Astronomical Observatories, Beijing Planetarium, and Shanghai Science and Technology Museum.-- Signed cooperation agreements with Lighting Research Center, English Education Group and law Firm; formed the team force.2. Put forward a proposal to national top institutionThe SSPC submitted the first proposal about dark sky protection to the Chinese People’s Political Consultative Conference.3. Introduced the Criteria and Guideline of dark sky protectionThe SSPC team translated 8 documents of IDA, and provided a reference basis for Chinese dark sky protection.4. Actively establish dark sky places-- Plan a Dark Sky Reserve around Ali astronomical observatory (5,100m elevation) in Tibet. China’s Xinhua News Agency released the news.-- Combining with Hangcuo Lake, a National Natural Reserve and Scenic in Tibet, to plan and establish the Dark Sky Park.-- Cooperated with Shandong Longgang Tourism Group to construct the Dream Sky Theme Park in the suburbs of Jinan city.In the IYL 2015, the SSPC is getting further development:First, make dark sky protection enter National Ecological Strategy of “Beautiful China”. We call on: “Beautiful China” needs “Beautiful Night Sky” China should care the shared starry sky, and left this resource and heritage for children.Second, hold “Cosmic Light” exhibition in Shanghai Science and Technology Museum on August.Third, continue to establish Dark Sky Reserve, Park and Theme Park. We want to make these places become the bases of dark sky protection, astronomical education and ecological tourism, and develop into new cultural industry.Fourth, actively join international cooperation.Now, “Blue Sky, White Cloud and Starry Sky “have become

  11. Tritium effluent control project progress report, July--September 1975

    International Nuclear Information System (INIS)

    Kershner, C.J.; Bixel, J.C.

    1976-01-01

    In the Tritiated Liquid Waste Decontamination (Molecular Excitation) program, it was found that a 1/4'' Nd:YAG amplifier and a Faraday rotator isolator must be added to the oscillator to obtain the required power for the laser excitation experiments. The isotopic selectivity of the two-photon dissociation process was examined in more detail. The selectivity or ratio of HTO to H 2 O molecules that are photodissociated was found to be on the order of 25, which is inadequate for application to large-scale detritiation projects, e.g., nuclear fuel reprocessing plant waste. The selectivity is such that most of the laser energy is wasted in photodissociation of H 2 O. This obstacle may be overcome by pumping more vibrational energy into the HTO molecules. Various schemes towards this end are being considered. Extensive ab initio calculations on the potential surface for the hydrogen atom-water exchange reaction have been carried out. The energy barrier is calculated to be 38 1/2 kcal/mole, which implies that the exchange reaction T + H 2 O → HTO + H is at least 10 9 times slower than the exchange reaction T + H 2 → HT + H. Calculations were also performed on the analogous hydrogen atom-hydrogen fluoride exchange reaction. In lieu of other disposal methods a system using a General Electric UCT-1 regenerative cell has been assembled and tested. This system should be capable of decomposing pure water into hydrogen and oxygen gases. The tritium from this process can be purified and reused instead of buried. A preliminary economic evaluation was made of the HT/H 2 O catalytic exchange detritiation stripping process as it might apply to a 5 metric ton/day nuclear fuel reprocessing plant. A tritiated water shipping container has been designed and developed for use with the ERDA--DOT approved AL--MI secondary container

  12. Effects of PTEN transfer on cell cycle progression and expression of P27kipl followed by X-ray irradiation

    International Nuclear Information System (INIS)

    Tian Mei; Wu Congmei; Liu Linlin; Piao Chunji; Li Xiuyi

    2007-01-01

    Objective: To investigate the effect of pEgr-hPTEN stable transfer combined with irradiation on the cell cycle progression and the expression of cell cycle kinase inhibitor P27 kipl protein of SHG-44 human glioma cells. Methods: pEgr-hPTEN vector containing the exogenous wild type PTEN gene was transfected into SHG-44 cells under mediation of lipofectamine in vitro, the positive cell clones were selected and amplified by using G418. Western blotting was used to measure the expression of PTEN protein. Transmission electron microscope was adopted to detect the cell ultrastructural changes and flow cytometry was adopted to analysis the changes of cell cycle progression and the expression of P27 kipl in SHG-44-sPTEN cells followed by different doses of X-ray irradiation. Results: Egr-1 promoter could be induced and activated by irradiation and then enhanced the expression of downstream PTEN gene within 5 Gy. The ultrastructure of SHG-44-sPTEN cells had many degenerative changes and many early apoptotic changes including the chromosome condensate around the nuclear envelope. pEgr-hPTEN stable transfer combined with X-ray irradiation could significantly induce G 1 arrest. The expression of P27 kipl proteins increased in SHG-44-sPTEN stable transfected cells. Conclusion: PTEN stable transfer combined with irradiation can significantly induce G 1 arrest. The molecular basis may be correlated with the enhanced expression of PTEN induced by irradiation and increased expression of cell cycle kinase inhibitor P27 kipl . (authors)

  13. Irradiation testing of LEU fuels in the SILOE Reactor - Progress report

    International Nuclear Information System (INIS)

    Merchie, Francis; Baas, Claude; Martel, Patrick

    1985-01-01

    Irradiation of uranium-silicide fuels has continued in the SILOE reactor during the past year. Thickness vs. fission density data from four U 3 Si plates containing 5.5 and 6.0 g U/cm 3 have been analyzed, and the results are presented. The irradiation of a full 60 g U/cm 3 U 3 Si element has begun. In addition, four U 3 Si 2 plates containing 20 to 54 g U/cm 3 are now being irradiated. These irradiations and future plans are discussed in the paper. (author)

  14. Measurements on irradiated L1 sensor prototypes for the D0 Run IIb silicon detector project

    Energy Technology Data Exchange (ETDEWEB)

    Ahsan, M.; Bolton, T.; Carnes, K.; /Kansas State U.; Demarteau, M.; /Fermilab; Demina, R.; /Rochester U.; Gray, T.; /Kansas State U.; Korjenevski, S.; /Rochester U.; Lehner, F.; /Zurich U.; Lipton, R.; Mao, H.S.; /Fermilab; McCarthy, R.; /SUNY, Stony Brook /Kansas State U. /Fermilab

    2010-01-01

    We report on irradiation studies of Hamamatsu prototype silicon microstrip detectors for layer 1 of the D0 upgrade project for Run IIb. The irradiation was carried out with 10 MeV protons up to proton fluence of 10{sup 14} p/cm{sup 2} at the J.R. Macdonald Laboratory, Manhatten, KS. The flux calibration was carefully checked using different dose normalization techniques. The results based on the obtained sensor leakage currents after irradiation show that the NIEL scaling hypothesis for low energy protons has to be applied with great care. We observe 30-40% less radiation damage in silicon for 10 MeV proton exposure than is expected from the predicted NIEL scaling.

  15. Measurements on irradiated L1 sensor prototypes for the D0 Run IIb silicon detector project

    International Nuclear Information System (INIS)

    Ahsan, M.; Bolton, T.; Carnes, K.; Demarteau, M.; Demina, R.; Gray, T.; Korjenevski, S.; Lehner, F.; Lipton, R.; Mao, H.S.; McCarthy, R.

    2010-01-01

    We report on irradiation studies of Hamamatsu prototype silicon microstrip detectors for layer 1 of the D0 upgrade project for Run IIb. The irradiation was carried out with 10 MeV protons up to proton fluence of 10 14 p/cm 2 at the J.R. Macdonald Laboratory, Manhatten, KS. The flux calibration was carefully checked using different dose normalization techniques. The results based on the obtained sensor leakage currents after irradiation show that the NIEL scaling hypothesis for low energy protons has to be applied with great care. We observe 30-40% less radiation damage in silicon for 10 MeV proton exposure than is expected from the predicted NIEL scaling.

  16. S.E.N.S.I.B. project. Progress report 2006

    International Nuclear Information System (INIS)

    2007-01-01

    This report presents the state of progress of all the studies which establish at present the S.E.N.S.I.B. project. For year 2006, the progress of the project is globally in compliance with the general schedule of realization of the S.E.N.S.I.B. project and with the perspectives announced in 2005. Factors of sensitivity were identified in diverse circles ( thematic studies) and methods and specific tools of the project are developed. 14 publications (reviews and congress) and 9 I.R.S.N. reports were produced. An international work group was launched to the I.R.S.N. initiative. The web site of S.E.N.S.I.B. on the I.R.S.N. scientific site was built. The S.E.N.S.I.B. project receives a financial participation of the Ademe. (N.C.)

  17. The regulation effect of STAT 5 signaling pathway on the cell cycle progression of irradiated KG-1 cells

    International Nuclear Information System (INIS)

    Guo Dehuang; Dong Bo; Luo Qingliang; Wen Gengyun; Mao Bingzhi

    2000-01-01

    The author investigated the role of the JAK/STAT signaling pathway regulating cell cycle progression in the irradiated KG-1 cells. By permanent transfecting the cells with DN-STAT 5 cDNA to block the JAK/STAT signaling pathway and then transient transfecting with cyclin D 1 or cyclin B 1 cDNA, the effects of cyclin D 1 protein and cyclin B 1 protein on the cell cycle progression were examined. Results showed that after irradiation with 8Gy 60 Co rays, the irradiated KG-1 cells transfected with only DN-STAT 5 cDNA can not recover form the G 1 arrest, even though GM-CSF was added. Meanwhile, the cells transfected with both the DN-STAT 5 cDNA and cyclin D 1 cDNA or cyclin B 1 cDNA can recover from the G 1 arrest or the G 2 arrest to a great extent. Thus, it was proved indirectly that the JAK/STAT signaling pathway activated by GM-CSF regulated the cell cycle progression through cyclin D 1 and cyclin B 1 protein

  18. Irradiation effects on reactor structural materials. Semi-annual progress report, August 1974--February 1975

    International Nuclear Information System (INIS)

    Claudson, T.T.

    1975-03-01

    Data are reported on: effects of cold work on creep-fatigue of irradiated 304 and 316 stainless steel (ss); swelling of 304 and 316 ss irradiated with protons and fast neutrons; effects of hold time on fatigue crack propagation in neutron-irradiated 20 percent cold-worked 316 ss; radiation resistance of 0.03 percent Cu A533-B steel; microstructure of irradiated Inconel 718, Incoloy 800, PH13-8Mo, Mo, and Nb; dose dependence of 2.8-MeV Ni + ion damage (swelling) in Ni; notch ductility and strength of 316 ss submerged arc weld deposits; effects of microstructure of 316 ss on its irradiation response; in-reactor deformation of 20 percent cold-worked 316 ss; microstructure of HFIR-irradiated 316 ss; void microstructures of V bombarded by 46-MeV Ni 6+ ions (with and without preinjected helium) or 7.5-MeV Ta 3+ ions; swelling of Mo, Mo--0.5 Ti, Nb, Nb--1 Zr, W, and W--25 Re after fast neutron irradiation; swelling of V ion-irradiated Mo; creep of 20 percent cold-worked 316 ss at 850, 1000, and 1100 0 F; effects of fast neutrons on mechanical properties of 20 percent cold-worked 316 ss; notch effects in tensile behavior of irradiated, annealed 304 ss (EBR-II duct thimbles); equations for thermal creep in pressurized tubes of 20 percent cold-worked 316 ss; irradiation creep in cold-worked 316 ss; helium production cross sections in neutron-irradiated elements; and radiation effects on various alloys. (U.S.)

  19. Final report of the HFIR [High Flux Isotope Reactor] irradiation facilities improvement project

    International Nuclear Information System (INIS)

    Montgomery, B.H.; Thoms, K.R.; West, C.D.

    1987-09-01

    The High-Flux Isotope Reactor (HFIR) has outstanding neutronics characteristics for materials irradiation, but some relatively minor aspects of its mechanical design severely limited its usefulness for that purpose. In particular, though the flux trap region in the center of the annular fuel elements has a very high neutron flux, it had no provision for instrumentation access to irradiation capsules. The irradiation positions in the beryllium reflector outside the fuel elements also have a high flux; however, although instrumented, they were too small and too few to replace the facilities of a materials testing reactor. To address these drawbacks, the HFIR Irradiation Facilities Improvement Project consisted of modifications to the reactor vessel cover, internal structures, and reflector. Two instrumented facilities were provided in the flux trap region, and the number of materials irradiation positions in the removable beryllium (RB) was increased from four to eight, each with almost twice the available experimental space of the previous ones. The instrumented target facilities were completed in August 1986, and the RB facilities were completed in June 1987

  20. Geothermal direct-heat utilization assistance. Quarterly project progress report, April--June 1993

    Energy Technology Data Exchange (ETDEWEB)

    Lienau, P.

    1993-06-01

    Technical assistance was provided to 60 requests from 19 states. R&D progress is reported on: evaluation of lineshaft turbine pump problems, geothermal district heating marketing strategy, and greenhouse peaking analysis. Two presentations and one tour were conducted, and three technical papers were prepared. The Geothermal Progress Monitor reported: USGS Forum on Mineral Resources, Renewable Energy Tax Credits Not Working as Congress Intended, Geothermal Industry Tells House Panel, Newberry Pilot Project, and Low-Temperature Geothermal Resources in Nevada.

  1. Ceramic Technology Project. Semiannual progress report for April 1993 through September 1993

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    The Ceramic Technology Project was originally developed by the Department of Energy`s Office of Transportation Systems (OTS) in Conservation and Renewable Energy. This project, part of the OTS`s Materials Development Program, was developed to meet the ceramic technology requirements of the OTS`s automotive technology programs. During the course of the Ceramic Technology Project, remarkable progress has been made in the development of reliable structural ceramics. However, further work is needed to reduce the cost of ceramics to facilitate their commercial introduction, especially in the highly cost-sensitive automotive market. The work described in this report is organized according to the following WBS project elements: Project Management and Coordination; Materials and Processing; Materials Design Methodology; Data Base and Life Prediction; and Technology Transfer. This report includes contributions from all currently active project participants. Separate abstracts were prepared for the 47 projects reported here.

  2. Selective elimination of intracortically projecting neurons of the rat neocortex by prenatal x-irradiation

    International Nuclear Information System (INIS)

    Jensen, K.F.

    1981-01-01

    The development of new racing methods has suggested that there are species differences in the extent of the contribution of the different layers of the neocortex to the callosal projection. The present investigation has utilized prenatal x-irradiation to selectively eliminate the late forming neurons of the supragranular layers of the rat neocortex. The reduction in the neuronal population of the supragranular layers closely parallels the reduction in the corpus callosum. These results indicate that the primary source of neurons of the callosal projection, are the late forming neurons of the supragranular layers. Thus, the current results suggest that low dose prenatal x-irradiation may be used to evaluate important developmental events in the formation of neocortical circuitry

  3. Asian regional co-operative project on food irradiation: Technology transfer

    International Nuclear Information System (INIS)

    1992-01-01

    These Proceedings include the final reports of work performed by different institutions under the scope of Phase II of the Asian Regional Co-operative Project on Food Irradiation. The topics covered include the disinfestation and decontamination of stored products; improvements in the hygiene of processed seafood; insect disinfestation of fruits; and sprout inhibition of root crops. The individual presentations are indexed separately. Refs, figs and tabs

  4. Gas-Cooled Reactor Programs annual progress report for period ending December 31, 1973. [HTGR fuel reprocessing, fuel fabrication, fuel irradiation, core materials, and fission product distribution; GCFR fuel irradiation and steam generator modeling

    Energy Technology Data Exchange (ETDEWEB)

    Kasten, P.R.; Coobs, J.H.; Lotts, A.L.

    1976-04-01

    Progress is summarized in studies relating to HTGR fuel reprocessing, refabrication, and recycle; HTGR fuel materials development and performance testing; HTGR PCRV development; HTGR materials investigations; HTGR fuel chemistry; HTGR safety studies; and GCFR irradiation experiments and steam generator modeling.

  5. Fuel irradiation research of Japan at OECD Halden Reactor Project. Achievement of joint researches between JAERI and other organizations in the period from 1994 to 1996

    International Nuclear Information System (INIS)

    Uetsuka, Hiroshi; Nakamura, Jinichi; Kinoshita, Motoyasu

    1998-01-01

    JAERI has performed cooperative researches with many Japanese agencies and companies by means of the Halden Boiling Heavy Water Reactor (HBWR) which is located at Halden in Norway. These cooperative researches are carried out based on the contracts of the cooperative researches, which are revised every three years, in accordance with the renewal of the participation of JAERI to the OECD Halden Reactor Project. This report summaries the objectives, contents and the outlines of the achievements of the cooperative researches during the three years from 1994 January to 1996 December. During the period, ten cooperative researches had been carried out, and two of them had finished during the period and other eight researches has been continued to the next three year period. There are many research items, and most of them are irradiation test researches of advanced fuel and cladding concerned with the high burnup utilization of LWR fuel or MOX fuel irradiation researches to prepare for the introduction of Plutonium utilization in LWRs. The researches of fuel irradiation usually take long time because of the characteristics of these kind of research work, and three years are usually not enough to obtain some achievements from the irradiation tests. Therefore, eight tests have been continued after the three year period. In this report, the achievements of the continued researches to the next three year period are not final one but a kind of progress report. (author) kind of progress report. (author)

  6. PROGRESSIVE ALTERATION OF SERUM PROTEINS IN RATS SEVERAL MONTHS AFTER AN ACUTE OR PROTRACTED IRRADIATION

    Energy Technology Data Exchange (ETDEWEB)

    Ghys, R.; Reuter, A.

    1963-06-15

    Delayed changes of the serum proteins in male Sprague Dawley rats that survived the acute radiation syndrome were investigated. Doses of Co/sup 60/ gamma ranging from LD/sub O/ to LD/sub 50/ were given to rats six to eight weeks of age. Paper electrophoreses and microdosage of proteins by the buiret method were performed on plasma proteins for 206 rats: 29 with acute irradiation; 73 chronic irradiation; 44 acute irradiation following cold acclimatization; and 80 normal animals. No significant variations in the total serum proteins were found in andy one group. Alpha globulins were found to be slightly above normal in some irradiated rats, but there was no significant variation in the BETA globulin fraction. Gamma globulins showed a marked and consistent increase following irradiation. Thus for observed protein chandges in irradiated rats have not proven to be dose dependent. It is suggested that the changes may provide a link between early irradiation syndrome and late effects. (H.M.G.)

  7. Demand-side management project for Tenaga Nasional Berhad. Progress report No. 4. Export trade information

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    This study, conducted by the California Energy Commission, was funded by the U.S. Trade and Development Agency. Progress Report No. 4 is divided into the following contents: April 6, 1994 Training Mission Delegation Itinerary; April 6, 1994 Training Mission Workshop Information Package; Letter to Chairman of Tenaga Nasional Berhad Requesting Demonstration Project Funding; Design/Build Construction Bid Proposal for Energy Efficient Electric Technology Demontration Project; Final Draft of Demand-Side Management Plan for Tenaga Nasional Berhad; Attachments.

  8. Stability and stabilization of polymers under irradiation. Final report of a co-ordinated research project, 1994-1997

    International Nuclear Information System (INIS)

    1999-01-01

    The contributions presented in this technical publication describe progress in understanding and controlling the degradation of polymeric materials induced by exposure to ionizing radiation. This subject area is of widespread importance to industrial use of radiation for two classes of applications: (1) the processing and production of polymeric materials by means of irradiation facilities, and (2) the use of polymeric materials in applications for which they must withstand irradiation throughout the course of their useful lifetimes. Due to extensive and still-growing use of polymeric materials for technological applications of immense variety, and the fact that radiation-processing has the potential to play an expanding role in polymer manufacturing (current uses include crosslinking, curing, sterilization, surface modification, lithography, etc.), the ability to inhibit unwanted material property changes which often occur when materials are irradiated, and to predict useful lifetimes, remains a limiting factor in a number of existing radiation technologies. Additionally, the ability to control unwanted degradation will be necessary for successful implementation of future, more advanced, radiation processing schemes. This co-ordinated research project (CRP) was established for the purpose of focusing the attention of appropriate technical experts on the complex task of establishing a better fundamental basis for understanding and attacking problems or radiation degradation of materials. The group dynamics have been designed to achieve a synergistic interaction among worldwide research facilities for the purposes of identifying degradation problems, exchanging ideas and results on the solution of these problems, and making the emerging information available in an organized and accessible format. From this meeting, it is clear that much remains to be learnt in terms of understanding degradation mechanisms and phenomena. It also appears that important new

  9. Project desk evaluation of a model project CPR/5/009 industrial scale irradiation of rice and other foodstuffs

    International Nuclear Information System (INIS)

    1996-11-01

    The project CPR/5/009 was approved in 1993 as a model project. The project objective was to build an industrial food irradiation facility for high quality rice and other foodstuffs, with a processing capacity of 5000-9000 tonnes per year. This capacity is large compared to many other facilities of the same type elsewhere. The success of the project waste to be measured against the full utilization of the facility with an acceptable availability factor. Disbursements on Agency inputs up to the end of June 1996 were $294,716 and consisted of one 100 kCi Co-60 source, quality control equipment, bag heat sealers, one expert mission and 13.5 months of training abroad. The current budget is $323,870, following two programme changes. The total cost of the project was estimated at $1,331,300 with the Chinese Government providing the balance. The major conclusions of this evaluation are as follows: Initially, the Agency overestimated the project and business management experience of the counterpart, and consequently underestimated the extent of support required. Providing support to counterparts in facing the key challenges of project management and business operation must be considered by the Agency in future projects of this type. The counterpart institution is also encouraged to emphasize these management issues in order to maximize sustainable and cost-effective utilization of such facilities. A new operational plan has been prepared by the counterpart for 1996 through 1998 which identifies seven customers requiring treatment of a total of 1000 tonnes per year of cereal grains and 1500 tonnes per year of other foodstuffs. This plan reflects a change in overall emphasis from supporting food supply security to ensuring the safety of foodstuffs. It is not clear whether this plan will support operation of the facility at full capacity. The team in place to operate the facility also needs further strengthening. (author). Figs, tabs

  10. Proton irradiation augments the reduction in tumor progression observed with advanced age

    Data.gov (United States)

    National Aeronautics and Space Administration — Proton irradiation is touted for its improved tumor targeting due to the physical advantages of ion beams for radiotherapy. Recent studies from our laboratory have...

  11. Heavy-section steel irradiation program. Semiannual progress report, October 1996--March 1997

    International Nuclear Information System (INIS)

    Rosseel, T.M.

    1998-02-01

    Maintaining the integrity of the reactor pressure vessel (RPV) in a light-water-cooled nuclear power plant is crucial in preventing and controlling severe accidents that have the potential for major contamination release. Because the RPV is the only key safety-related component of the plant for which a redundant backup system does not exist, it is imperative to fully understand the degree of irradiation-induced degradation of the RPV's fracture resistance that occurs during service. For this reason, the Heavy-Section Steel Irradiation (HSSI) Program has been established. Its primary goal is to provide a thorough, quantitative assessment of the effects of neutron irradiation on the material behavior and, in particular, the fracture toughness properties of typical pressure-vessel steels as they relate to light-water RPV integrity. Effects of specimen size; material chemistry; product form and microstructure; irradiation fluence, flux, temperature, and spectrum; and postirradiation annealing are being examined on a wide range of fracture properties. The HSSI Program is arranged into eight tasks: (1) program management, (2) irradiation effects in engineering materials, (3) annealing, (4) microstructural analysis of radiation effects, (5) in-service irradiated and aged material evaluations, (6) fracture toughness curve shift method, (7) special technical assistance, and (8) foreign research interactions. The work is performed by the Oak Ridge National Laboratory

  12. Heavy-section steel irradiation program. Progress report, October 1992--March 1993

    International Nuclear Information System (INIS)

    Corwin, W.R.

    1998-04-01

    Maintaining the integrity of the reactor pressure vessel (RPV) in a light-water-cooled nuclear power plant is crucial in preventing and controlling severe accidents that have the potential for major contamination release. The RPV is one of only two more safety-related components of the plant for which a duplicate or redundant backup system does not exist. It is therefore imperative to understand and be able to predict the capabilities and limitations of the integrity inherent in the RPV. In particular, it is vital to fully understand the degree of irradiation-induced degradation of the RPV's fracture resistance that occurs during service. For this reason, the Heavy-Section Steel Irradiation (HSSI) Program has been established at Oak Ridge National Laboratory (ORNL) under sponsorship of the Nuclear Regulatory Commission (NRC). The primary goal of this major safety program is to provide a thorough, quantitative assessment of the effects of neutron irradiation on the material behavior (in particular, the fracture toughness properties) of typical pressure-vessel steels as they relate to light-water-reactor pressure-vessel integrity. The program centers on experimental assessments of irradiation-induced embrittlement (including the completion of certain irradiation studies previously conducted by the Heavy-Section Steel Technology Program) augmented by detailed examinations and modeling of the accompanying microstructural changes. Effects of specimen size; material chemistry; product form and microstructure; irradiation fluence, flux, temperature, and spectrum; and postirradiation annealing are being examined on a wide range of fracture properties

  13. Heavy-Section Steel Irradiation Program: Volume 3, Progress report, October 1991--September 1992

    International Nuclear Information System (INIS)

    Corwin, W.R.

    1995-02-01

    The primary goal of the Heavy-Section Steel Irradiation Program is to provide a thorough, quantitative assessment of the effects of neutron irradiation on the material behavior, and in particular the fracture toughness properties, of typical pressure vessel steels as they relate to light-water reactor pressure-vessel integrity. Effects of specimen size, material chemistry, product form and microstructure, irradiation fluence, flux, temperature and spectrum, and postirradiation annealing are being examined on a wide range of fracture properties. The HSSI Program is arranged into 10 tasks: (1) program management, (2) K Ic curve shift in high-copper welds, (3) K Ia curve shift in high-copper welds, (4) irradiation effects on cladding, (5) K Ic and K Ia curve shifts in low upper-shelf welds, (6) irradiation effects in a commercial low upper-shelf weld, (7) microstructural analysis of irradiation effects, (8) in-service aged material evaluations, (9) correlation monitor materials, and (10) special technical assistance. This report provides an overview of the activities within each of these tasks from October 1991 to September 1992

  14. Contracts for field projects and supporting research on enhanced oil recovery. Progress review No. 89

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-04-01

    Summaries are presented for the DOE contracts related to supported research for thermal recovery of petroleum, geoscience technology, and field demonstrations in high-priority reservoir classes. Data included for each project are: title, contract number, principal investigator, research organization, beginning date, expected completion date, amount of award, objectives of the research, and summary of technical progress.

  15. The Text of the Project Agreement between the Agency and Afghanistan regarding Arrangements for the Transfer of Therapeutic Irradiation Equipment

    International Nuclear Information System (INIS)

    1966-01-01

    The text of the Project Agreement between the Agency and Afghanistan Regarding Arrangements for the Transfer of Therapeutic Irradiation Equipment is reproduced in this document for the information of all Members

  16. Effects of caffeine on protein phosphorylation and cell cycle progression in X-irradiated two-cell mouse embryos

    International Nuclear Information System (INIS)

    Jung, Th.; Streffer, C.

    1992-01-01

    To understand the mechanism of the caffeine-induced uncoupling of mitosis and the cellular reactions to DNA-damaging agents, the authors studied the effects of caffeine treatment on cell cycle progression and protein phosphorylation in two-cell mouse embryos after X-irradiation. Caffeine alone had no effect on timing of and changes in phosphorylation associated with the embryonic cell cycle. In combination with X-rays, caffeine was able to override the radiation induced G 2 block and restored normal timing of these phosphorylation changes after X-irradiation. New additional changes in protein phosphorylation appeared after the combined treatment. Isobutyl-methylxanthine (IBMX), a substance chemically related to caffeine but a more specific inhibitor of the phosphodiesterase that breaks down cyclic AMP, reduced radiation induced G 2 block from 4 to 5 h to about 1 h and restored the cell cycle associated changes in protein phosphorylation. (author)

  17. Effects of caffeine on protein phosphorylation and cell cycle progression in X-irradiated two-cell mouse embryos

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Th. (AFRC Institute of Animal Physiology and Genetics Research, Babraham (United Kingdom)); Streffer, C. (Essen Univ (Germany). Inst. fuer Medizinische Strahlenbiolgie)

    1992-08-01

    To understand the mechanism of the caffeine-induced uncoupling of mitosis and the cellular reactions to DNA-damaging agents, the authors studied the effects of caffeine treatment on cell cycle progression and protein phosphorylation in two-cell mouse embryos after X-irradiation. Caffeine alone had no effect on timing of and changes in phosphorylation associated with the embryonic cell cycle. In combination with X-rays, caffeine was able to override the radiation induced G[sub 2] block and restored normal timing of these phosphorylation changes after X-irradiation. New additional changes in protein phosphorylation appeared after the combined treatment. Isobutyl-methylxanthine (IBMX), a substance chemically related to caffeine but a more specific inhibitor of the phosphodiesterase that breaks down cyclic AMP, reduced radiation induced G[sub 2] block from 4 to 5 h to about 1 h and restored the cell cycle associated changes in protein phosphorylation. (author).

  18. Existing and projected neutron sources and low-temperature irradiation facilities in Germany

    International Nuclear Information System (INIS)

    Boening, K.

    1984-01-01

    In this paper, a contribution given at the Kyoto University Research Reactor Institute to the temporal meeting on the design of the facilities for high flux, low temperature irradiation is summarized. The following five subjects were discussed. The project of modernizing the swimming pool type research reactor FRM with 4 MW power at Munich is to achieve relatively high thermal neutron flux, and an extremely compact core is designed. The existing low temperature irradiation facility (LTIF) of the FRM is the most powerful in the world, and has been successfully operated more than 20 years. The fast and thermal neutron fluxes are 2.9 x 10 13 and 3.5 x 10 13 /cm 2 sec, respectively. The experimental techniques in the LTIF of the FRM, such as a measuring cryostat, the mounting of irradiated samples and so on, are described. The installation of new LTIFs in connection with the projects of advanced neutron sources in Germany is likely to be made in the modernized FRM at Garching, in the spallation neutron source SNQ at KFA Juelich and so on. The interesting problems in fundamental and applied researches with LTIFs, and the unusual application of LTIFs are shown. (Kako, I.)

  19. Annual report on reactor safety research projects. Reporting period 2013. Progress report

    International Nuclear Information System (INIS)

    2013-01-01

    Within its competence for energy research the Federal Ministry of Economics and Technology (BMWi) sponsors research projects on the safety of nuclear power plants currently in operation. The objective of these projects is to provide fundamental knowledge, procedures and methods to contribute to realistic safety assessments of nuclear installations, to the further development of safety technology and to make use of the potential of innovative safety-related approaches. The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS)mbH, by order of the BMWi, continuously issues information on the status of such research projects by publishing semi-annual and annual progress reports within the series of GRSF- Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work. The progress reports are published by the Project Management Agency/Authority Support Division of GRS. The reports as of the year 2000 are available in the Internet-based information system on results and data of reactor safety research (http://www.grs-fbw.de). The compilation of the reports is classified according to the classification system ''Joint Safety Research Index (JSRI)''. The reports are arranged in sequence of their project numbers. It has to be pointed out that the authors of the reports are responsible for the contents of this compilation. The BMWi does not take any responsibility for the correctness, exactness and completeness of the information nor for the observance of private claims of third parties. (orig.)

  20. Annual report on reactor safety research projects. Reporting period 2011. Progress report

    International Nuclear Information System (INIS)

    2011-01-01

    Within its competence for energy research the Federal Ministry of Economics and Technology (BMWi) sponsors research projects on the safety of nuclear power plants currently in operation. The objective of these projects is to provide fundamental knowledge, procedures and methods to contribute to realistic safety assessments of nuclear installations, to the further development of safety technology and to make use of the potential of innovative safety-related approaches. The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS)mbH, by order of the BMWi, continuously issues information on the status of such research projects by publishing semi-annual and annual progress reports within the series of GRSF- Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work. The progress reports are published by the Project Management Agency/Authority Support Division of GRS. The reports as of the year 2000 are available in the Internet-based information system on results and data of reactor safety research (http://www.grs-fbw.de). The compilation of the reports is classified according to the classification system ''Joint Safety Research Index (JSRI)''. The reports are arranged in sequence of their project numbers. It has to be pointed out that the authors of the reports are responsible for the contents of this compilation. The BMWi does not take any responsibility for the correctness, exactness and completeness of the information nor for the observance of private claims of third parties. (orig.)

  1. Annual report on reactor safety research projects. Reporting period 2014. Progress report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-07-01

    Within its competence for energy research the Federal Ministry for Economic Affairs and Energy (BMWi) sponsors research projects on the safety of nuclear power plants currently in operation. The objective of these projects is to provide fundamental knowledge, procedures and methods to contribute to realistic safety assessments of nuclear installations, to the further development of safety technology and to make use of the potential of innovative safety-related approaches. The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH, by order of the BMWi, continuously issues information on the status of such research projects by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work. The progress reports are published by the Project Management Agency/Authority Support Division of GRS. The reports as of the year 2000 are available in the lnternet-based information system on results and data of reactor safety research (http://www.grs-fbw.de). The compilation of the reports is classified according to the classification system ''Joint Safety Research Index (JSRI)''. The reports are arranged in sequence of their project numbers. lt has to be pointed out that the authors of the reports are responsible for the contents of this compilation. The BMWi does not take any responsibility for the correctness, exactness and completeness of the information nor for the observance of private claims of third parties.

  2. Annual report on reactor safety research projects. Reporting period 2015. Progress report

    International Nuclear Information System (INIS)

    2015-01-01

    Within its competence for energy research the Federal Ministry for Economic Affairs and Energy (BMWi) sponsors research projects on the safety of nuclear power plants currently in operation. The objective of these projects is to provide fundamental knowledge, procedures and methods to contribute to realistic safety assessments of nuclear installations, to the further development of safety technology and to make use of the potential of innovative safety-related approaches. The Gesellschaft tor Anlagen- und Reaktorsicherheit (GRS) gGmbH, by order of the BMWi, continuously issues information on the status of such research projects by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are ·' prepared in a standard form by the research organisations themselves as documentation of their progress in work. The progress reports are published by the Project Management Agency/Authority Support Division of GRS. The reports as of the year 2000 are available in the lnternet-based information system on results and data of reactor safety research (http://www.grs-fbw.de). The compilation of the reports is classified according to the classification system ''Joint Safety Research Index (JSRI)''. The reports are arranged in sequence of their project numbers. it has to be pointed out that the authors of the reports are responsible for the contents of this compilation. The BMWi does not take any responsibility for the correctness, exactness and completeness of the information nor for the observance of private claims of third parties.

  3. Environment, safety and health progress assessment of the Fernald Environmental Management Project (FEMP)

    International Nuclear Information System (INIS)

    1991-11-01

    This report documents the results of the Environment, Safety, and Health (ES ampersand H) Progress Assessment of the Fernald Environmental Management Project (FEMP), Fernald, Ohio, conducted from October 15 through October 25, 1991. The Secretary of Energy directed that small, focused, ES ampersand H Progress Assessments be performed as part of the continuing effort to institutionalize line management accountability and the self-assessment process in the areas of ES ampersand H. The FEMP assessment is the pilot assessment for this new program. The objectives for the FEMP ES ampersand H Progress Assessment were to assess: (1) how the FEMP has progressed since the 1989 Tiger Assessment; (2) how effectively the FEMP has corrected specific deficiencies and associated root causes identified by that team; and (3) whether the current organization, resources, and systems are sufficient to proactively manage ES ampersand H issues

  4. Environment, safety and health progress assessment of the Fernald Environmental Management Project (FEMP)

    Energy Technology Data Exchange (ETDEWEB)

    1991-11-01

    This report documents the results of the Environment, Safety, and Health (ES&H) Progress Assessment of the Fernald Environmental Management Project (FEMP), Fernald, Ohio, conducted from October 15 through October 25, 1991. The Secretary of Energy directed that small, focused, ES&H Progress Assessments be performed as part of the continuing effort to institutionalize line management accountability and the self-assessment process in the areas of ES&H. The FEMP assessment is the pilot assessment for this new program. The objectives for the FEMP ES&H Progress Assessment were to assess: (1) how the FEMP has progressed since the 1989 Tiger Assessment; (2) how effectively the FEMP has corrected specific deficiencies and associated root causes identified by that team; and (3) whether the current organization, resources, and systems are sufficient to proactively manage ES&H issues.

  5. Progress reports on SCWR-related development projects from Chinese universities for FY2008-2009

    International Nuclear Information System (INIS)

    Leung, L.K.H.

    2010-02-01

    Canada is participating in the international cooperative forum on system research for two designs (supercritical water-cooled reactor, SCWR, and Very High Temperature Reactor, VHTR) of the Gen-IV nuclear reactor. The forum is referred to as the Generation-IV International Forum (or GIF). The Canadian effort focuses mainly on the SCWR. Among various GIF participants, Canada is the leader of this design and has interest mainly on the pressure-tube type reactor, which is a natural extension of the existing CANDU reactor. Several critical research areas (such as material, chemistry, thermalhydraulics, instability, critical flow, etc.) have been identified in the system-research plan for supporting the SCWR design. Collaborative projects have been established between AECL and universities in China to expedite the CANDU SCWR design. These projects focus on research areas beyond the current scope of the AECL and the NSERC/NRCan/AECL collaborative research and development (CRD) project. AECL supports these projects directly and is contributing (in-kind) the results and findings to the Canadian national program. The collaboration between AECL and Chinese universities began in 2007 July. Most projects cover the duration of three years. The Chinese universities submit their annual progress reports each year prior to the project renewal. The objective of this report is to summarize the progress on collaborative projects between AECL and Chinese universities (namely the Tsinghua University, Shanghai Jiaotong University, and Xi'an Jiaotong University) over the duration of 2008 July to 2009 June. (author)

  6. Progress and status of the international project on innovative nuclear reactors and fuel cycles (INPRO) - 5182

    International Nuclear Information System (INIS)

    Ponomarev, A.; Fesenko, G.; Grigoriev, F.G.; Korinny, A.; Phillips, J.R.; Rho, K.

    2015-01-01

    The IAEA's International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) was established in 2000 through IAEA General Conference resolution. INPRO cooperates with Member States to ensure that sustainable nuclear energy is available to help meet the energy needs of the 21. century. INPRO membership has grown to 41 members and 16 observers. The paper presents the current prospectus of the INPRO programme and details the most recent achievements in the following 7 projects: 1) the GAINS project (Global Architecture of Innovative Nuclear Energy Systems with thermal and fast reactors and a closed nuclear fuel cycle); 2) the SYNERGIES project applies and amends the analytical framework developed in GAINS project to examine more specifically the various forms of regional collaboration among nuclear energy suppliers and users; 3) the KIND project (Key Indicators for Innovative Nuclear Energy Systems) has the objective of developing guidance on the evaluation on innovative nuclear technologies; 4) the ROADMAPS project addresses several possible stages toward nuclear energy sustainability; 5) the RISC project aims at demonstrating that the evolution of safety requirements and technical innovations provide continual progress towards the avoidance of evacuation measures outside NPP sites in case of severe accidents; 6) the FANES project has the objective of carrying out feasibility analyses of advanced and innovative fuels for different reactor systems; and 7) the WIRAF project aims at identifying problematic waste from innovative reactor designs and corresponding nuclear fuel cycles

  7. International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO). 2008 progress report

    International Nuclear Information System (INIS)

    2009-02-01

    The purpose of the work is to review the progress of the IAEA international project for innovative reactors and fuel cycle technologies (INPRO). The publication reports about the recognition of INPRO and on general Information on INPRO, its strengths, memberships, collaboration with other international initiatives, the INPRO organization and management and the history of INPRO. The section on the progress of INPRO in 2008 contains task 1: INPRO Methodology, task 2: Assessment Studies, task 3: Nuclear Energy Visions for the 21st Century, task 4: Infrastructure and Institutional Innovation, task 5: Common User Considerations and task 6: Collaborative Projects. Conclusions and New Trends are followed by a bibliography. Annex I deals with the INPRO project management in 2008 and Annex II provides a selection of photographs from 2008. Finally a list of acronyms is provided

  8. Blood responses under chronic low daily dose gamma irradiation: Pt. 1; Differential preclinical responses of irradiated male dogs in progression to either aplastic anemia or myeloproliferative disease

    Energy Technology Data Exchange (ETDEWEB)

    Seed, T.M.; Carnes, B.A.; Tolle, D.V.; Fritz, T.E. (Argonne National Lab., IL (USA))

    1989-01-01

    Male beagles chronically exposed to low daily doses of {sup 60}Co {gamma} rays show one of three hematopoietic patterns, which reflect three different distinctly responding subgroups: (1) low radioresistance with progressing aplastic anemia and shortened survival ({sup -S}-AA subgroup); (2) high radioresistance with a complex of progressing myeloproliferative disorders ({sup +}R-MPD group); or (3) high radioresistance with other nonMPD syndromes ({sup +}R-nonMPD group). Blood cell levels (granulocytes, monocytes, erythrocytes, lymphocytes, and platelets) were assessed and fitted to a flexible polynomial spline model. Results showed that relative to the overall magnitude of blood cell loss as well as to the maximum rate of suppression during the initial phase, the subgroups were generally ranked {sup -}S-AA >> {sup +}R-MPD > {sup +}R-nonMPD. Relative to the overall strength of the recovery response, the subgroups were generally ranked {sup +}R-MPD > {sup +}R-nonMPD >>> {sup -}S-AA. In terms of overall maintenance levels of circulating blood cells during the recovery phase, however, the {sup +}R-nonMPD subgroup consistently exhibited stronger responses than the {sup +}R-MPD subgroup. These results support our contention that selected subgroups of dogs have strong propensities to specific hematopathologies (i.e. aplastic anemia and myeloid leukemia) under chronic irradiation and that these pathology-prone animals exhibit a series of marked differential hematopoietic responses during early preclinical phases, which serve effectively to prognosticate subsequent pathological progression. (author).

  9. Ground-water monitoring compliance projects for Hanford Site facilities: Annual progress report for 1987

    International Nuclear Information System (INIS)

    Hall, S.H.

    1988-09-01

    This report describes progress during 1987 of five Hanford Site ground water monitoring projects. Four of these projects are being conducted according to regulations based on the federal Resource Conservation and Recovery Act of 1976 and the state Hazardous Waste Management Act. The fifth project is being conducted according to regulations based on the state Solid Waste Management Act. The five projects discussed herein are: 300 Area Process Trenches; 183-H Solar Evaporation Basins; 200 Areas Low-Level Burial Grounds; Nonradioactive Dangerous Waste Landfill; Solid Waste Landfill. For each of the projects, there are included, as applicable, discussions of monitoring well installations, water-table measurements, background and/or downgradient water quality and results of chemical analysis, and extent and rate of movement of contaminant plumes. 14 refs., 30 figs., 13 tabs

  10. ARCHER Project: Progress on Material and component activities for the Advanced High Temperature Reactor

    International Nuclear Information System (INIS)

    Buckthorpe, D.E.

    2014-01-01

    The ARCHER (Advanced High-Temperature Reactors for Cogeneration of Heat and Electricity R&D) integrated project is a four year project which was started in 2011 as part of the European Commission 7th Framework Programme (FP7) to perform High Temperature Reactor technology R&D in support of reactor demonstration. The project consortium encompasses conventional and Nuclear Industry, Utilities, Technical Support Organizations, Research & Development Organizations and Academia. The activities involved contribute to the Generation IV (GIF) International Forum and collaborate with related projects in the US, China, Japan, and the Republic of Korea in cooperation with IAEA and ISTC. This paper addresses the progress of the work on ARCHER materials and component activities since the start of the project and underlines some of the main conclusions reached. (author)

  11. Report on the Progress of Weld Development of Irradiated Materials at the Oak Ridge National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Feng, Zhili [ORNL; Miller, Roger G. [ORNL; Chen, Jian [ORNL; Tang, Wei [ORNL; Clark, Scarlett R. [ORNL; Gibson, Brian T. [ORNL; Vance, Mark Christopher [ORNL; Frederick, Greg [Electric Power Research Institute (EPRI); Tatman, Jonathan K. [Electric Power Research Institute (EPRI); Sutton, Benjamin J. [Electric Power Research Institute (EPRI)

    2018-04-01

    This report summarizes recent welding activities on irradiated alloys in the advanced welding facility at the Radiochemical Engineering Development Center of Oak Ridge National Laboratory and the development of post-weld characterization capabilities and procedures that will be critical for assessing the ability of the advanced welding processes housed within the facility to make successful repairs on irradiated alloys. This facility and its capabilities were developed jointly by the U.S. Department of Energy, Office of Nuclear Energy, Light Water Reactor Sustainability Program and the Electric Power Research Institute, Long Term Operations Program (and the Welding and Repair Technology Center), with additional support from Oak Ridge National Laboratory. The significant, on-going effort to weld irradiated alloys with high Helium concentrations and comprehensively analyze the results will eventually yield validated repair techniques and guidelines for use by the nuclear industry in extending the operational lifetimes of nuclear power plants.

  12. Heavy-section steel irradiation program. Semiannual progress report, September 1993--March 1994

    International Nuclear Information System (INIS)

    Corwin, W.R.

    1995-04-01

    Maintaining the integrity of the reactor pressure vessel (RPV) in a light-water-cooled nuclear power plant is crucial in preventing and controlling severe accidents that have the potential for major contamination release. The RPV is the only component in the primary pressure boundary for which, if it should rupture, the engineering safety systems cannot assure protection from core damage. It is therefore imperative to understand and be able to predict the capabilities and limitations of the integrity inherent in the RPV. In particular, ft is vital to fully understand the degree of irradiation-induced degradation of the RPV's fracture resistance that occurs during service. The Heavy-Section Steel (HSS) Irradiation Program has been established; its primary goal is to provide a thorough, quantitative assessment of the effects of neutron irradiation on the material behavior, and in particular the fracture toughness properties of typical pressure-vessel steels, as they relate to light-water RPV integrity. The program includes the direct continuation of irradiation studies previously conducted within the HSS Technology Program augmented by enhanced examinations of the accompanying microstructural changes. During this period, the report on the duplex-type crack-arrest specimen tests from Phase 11 of the K la program was issued, and final preparations for testing the large, irradiated crack-arrest specimens from the Italian Committee for Research and Development of Nuclear Energy and Alternative Energies were completed. Tests on undersize Charpy V-notch (CVN) energy specimens in the irradiated and annealed weld 73W were completed. The results are described in detail in a draft NUREG report. In addition, the ORNL investigation of the embrittlement of the High Flux Isotope RPV indicated that an unusually large ratio of the high-energy gamma-ray flux to fast-neutron flux is most likely responsible for the apparently accelerated embrittlement

  13. Shellfish depuration by gamma irradiation. Progress report No. 1, October 1, 1985-July 25, 1986

    International Nuclear Information System (INIS)

    Beghian, L.; Melnick, J.

    1986-01-01

    Objective is to investigate the feasibility of employing food irradiation technology to reduce or eliminate the threat of viral diseases contracted as a result of consumption of raw or inadequately cooked shellfish. Several recently published studies warn of the health risks associated with eating of raw shellfish - particularly American oysters, Crassostrea virginica, and the hardshelled clam, Mercenaria mercenaria. This study addresses the possibility of reducing the incidence of molluscanborne diseases through the application of 60 Co gamma irradiation processing to effect the inactivation of pathogenic viruses in live, raw shwllfish. Dosimetry, D 10 doses, and organoleptic effects were studied

  14. FP7 project LONGLIFE: Treatment of long-term irradiation embrittlement effects in RPV safety assessment

    International Nuclear Information System (INIS)

    May, J.; Hein, H.; Altstadt, E.; Bergner, F.; Viehrig, H.W.; Ulbricht, A.; Chaouadi, R.; Radiguet, B.; Cammelli, S.; Huang, H.; Wilford, K.

    2012-01-01

    The increasing age of European Nuclear Power Plants (NPPs) and envisaged extensions of plant lifetimes from 40 up to 80 years require an improved understanding of ageing phenomena of RPV components. The Network of Excellence NULIFE (Nuclear Plant Life Prediction) has been established to advance the safe and economic long-term operation (LTO) of NPPs by facilitating increased co-operation for applied R and D amongst members of the European nuclear community. The accurate prediction and management of RPV neutron irradiation embrittlement connected with long-term operation is an important aspect of this co-operation. Phenomena that might become important at high neutron fluences (such as flux effects and late blooming effects) have to be considered adequately in safety assessments. However, the surveillance database for prolonged irradiation times and low neutron fluxes is sparse. Consequently, there are significant uncertainties in the treatment of long-term irradiation effects. Therefore, the project LONGLIFE (Treatment of long-term irradiation embrittlement effects in RPV safety assessment) was initiated under the Euratom 7th Framework Programme of the European Commission as an umbrella project of NULIFE. LONGLIFE aims at 1) improved understanding of long-term irradiation phenomena that might compromise RPV integrity, and thereby the LTO of European NPPs, and 2) assessment of the adequacy of current prediction tools, codes, standards and surveillance guidelines for supporting long-term RPV operation. The scope of the work comprises the analysis of LTO boundary conditions; microstructural investigations and supplementary mechanical tests on RPV steels, including RPV steels from decommissioned plants; training activities; and elaboration of recommendations for RPV materials assessment and embrittlement surveillance under LTO conditions. A key part of the technical work is the selection of relevant materials for examination, e.g. which contain different weld and base

  15. Progress on flue gas desulfurization and denitration with electron beam irradiation in CAEP

    International Nuclear Information System (INIS)

    Ren Min; Wang Baojian; Yang Ruizhuang; Huang Wenfeng; He Xiaohai; Mao Benjiang

    2005-01-01

    The first pilot plant with electron beam irradiation for desulfurization and denitration of flue gas in China and the experimental results based on the pilot plant are briefly introduced in this paper. The FGD (flue gas desulfurization) demonstration installation designed by CAEP (China Academy of Engineering Physics) in Beijing Jingfeng Thermal Powe Co., Ltd. is recommended. (author)

  16. Irradiation effects on reactor structural materials. Semiannual progress report, March 1975--July 1975

    International Nuclear Information System (INIS)

    Claudson, T.T.

    1975-12-01

    Mechanical properties and irradiation effects are reported by Aerojet, ANL, AI, GE, HEDL, NRL, ORNL, PNL, and Univ. of Cincinnati for: Type 304, 304L, and 316 stainless steels; Inconel 718; nickel; Ni alloys; V alloys; Mo; Nb; and Nb--1 Zr

  17. Shippingport Station Decommissioning Project: FYs 1984-1985 annual progress report, October 1, 1983 through September 30, 1985

    International Nuclear Information System (INIS)

    1987-01-01

    This report presents progress on the Shippingport Station Decommissioning Project for FYs 1984-85. There are three main topics: project management, decommissioning project activities, and issues of concern. The project purpose is demonstration of nuclear plant decommissioning and dismantlement operations in an environment of current industry practices. 8 refs., 8 figs., 2 tabs

  18. Progress report for project modeling Arctic barrier island-lagoon system response to projected Arctic warming

    Science.gov (United States)

    Erikson, Li H.; Gibbs, Ann E.; Richmond, Bruce M.; Storlazzi, Curt; B.M. Jones,

    2012-01-01

    Changes in Arctic coastal ecosystems in response to global warming may be some of the most severe on the planet. A better understanding and analysis of the rates at which these changes are expected to occur over the coming decades is crucial in order to delineate high-priority areas that are likely to be affected by climate changes. In this study we investigate the likelihood of changes to habitat-supporting barrier island – lagoon systems in response to projected changes in atmospheric and oceanographic forcing associated with Arctic warming. To better understand the relative importance of processes responsible for the current and future coastal landscape, key parameters related to increasing arctic temperatures are investigated and used to establish boundary conditions for models that simulate barrier island migration and inundation of deltaic deposits and low-lying tundra. The modeling effort investigates the dominance and relative importance of physical processes shaping the modern Arctic coastline as well as decadal responses due to projected conditions out to the year 2100.

  19. Agency for Nuclear Projects/Nuclear Waste Project Office final progress report

    International Nuclear Information System (INIS)

    1992-01-01

    The Nevada Agency for Nuclear Projects/Nuclear Waste Project Office (NWPO) was formally established by Executive Policy in 1983 following passage of the federal Nuclear Waste Policy Act of 1982 (Act). That Act provides for the systematic siting, construction, operation, and closure of high-level radioactive defense and research by-products and other forms of high-level radioactive waste from around the country which will be stored at such repositories. In 1985 the Nevada legislature formally established the NWPO as a distinct and statutorily authorized agency to provide support to the Governor and State Legislature on matters concerning the high-level nuclear waste programs. The NWPO utilized a small, central staff supplemented by contractual services for needed technical and specialized expertise in order to provide high quality oversight and monitoring of federal activities, to conduct necessary independent studies, and to avoid unnecessary duplication of efforts. This report summarizes the results of this ongoing program to ensure that risks to the environment and to human safety are minimized. It includes findings in the areas of hydrogeology, geology, quality assurance activities, repository engineering, legislature participation, socioeconomic affects, risk assessments, monitoring programs, public information dissemination, and transportation activities. The bulk of the reporting deals with the Yucca Mountain facility

  20. Low-Cost Solar Array Project. Progress report 14, August 1979-December 1979 and proceedings of the 14th Project Integration Meeting

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    Progress made by the Low-Cost Solar Array Project during the period August through November 1979, is described. Progress on project analysis and integration; technology development in silicon material, large-area sheet silicon, and encapsulation; production process and equipment development; engineering, and operations, and the steps taken to integrate these efforts are detailed. A report on the Project Integration Meeting held December 5-6, 1979, including copies of the visual materials used, is presented.

  1. Research progress in plant mutation by combining ion beam irradiations and tissue culture

    International Nuclear Information System (INIS)

    Zhou Linbin; Li Wenjian; Qu Ying; Li Ping

    2007-01-01

    About a new mutation breeding method which combines plant tissue culture technique with heavy ion beam irradiations were discussed in this paper with the principles, operation steps, molecular mechanisms, etc. The mutation method developed a few advantages coming from plant tissue culture, which can produce offspring by asexual ways. Meanwhile, using this method, the study of biological effects of high energy particles with different linear energy transfer values on plant tissues or cells can be explored and optimized in theory or practice. (authors)

  2. Recent progress in the modelling of helium and tritium behaviour in irradiated beryllium pebbles

    International Nuclear Information System (INIS)

    Rabaglino, E.; Ronchi, C.; Cardella, A.

    2003-01-01

    One of the key issues of the European Helium Cooled Pebble Bed blanket is the behaviour under irradiation of beryllium pebbles, which have the function of neutron multiplier. An intense production of helium occurs in-pile, as well as a non negligible generation of tritium. Helium bubbles induce swelling and a high tritium inventory is a safety issue. Extensive studies for a better understanding, characterisation and modelling of the behaviour of helium and tritium in irradiated beryllium pebbles are being carried out, with the final aim to enable a reliable prediction of gas release and swelling in the full range of operating and accidental conditions of a Fusion Power Reactor. The general strategy consists in integrating studies on macroscopic phenomena (gas release) with the characterisation of corresponding microscopic diffusion phenomena (bubble kinetics) and the assessment of some fundamental diffusion parameter for the models (gas atomic diffusion coefficients). The present work gives a summary of the latest achievements in this context. By an inverse analysis of experimental out-of-pile gas release from weakly irradiated pebbles, coupled to the study of the characteristics of bubble population, it has been possible to assess the thermal diffusion coefficients of helium and tritium in and to improve and validate the classical model of gas precipitation into bubbles inside the grain. The improvement of the description of gas atomic diffusion and precipitation is the first step to enable a more reliable prediction of gas release

  3. Detection of irradiated food. Progress report 1989/90-1992/93

    International Nuclear Information System (INIS)

    Cerda, H.

    1993-01-01

    In 1990 the Swedish National Food Administration was commissioned by the Ministry of Agriculture to prepare and develop methods of analysis to identify irradiated foods. This work has been done in cooperation with the Department of Radioecology, Swedish University of Agricultural Sciences. Two methods for analyses of irradiated foods have been developed; a chemical method for analysis of products containing fat, and a method for analysis of DNA in cells obtained from foods. Both methods have been tested within the Nordic cooperation programme and the BCR programme (Bureau Communautaire de Reference) organized by the EC. The chemical method for analysis of fats is already an established method that is approved for certain foods by authorities in, for example, Germany. The DNA approach is new and is considered to be a rapid screening method for use in combination with other methods. However, this method requires testing in cooperation with other laboratories before it can be accepted internationally. Laboratories from several countries are already using the method. The two methods described here make it possible to monitor foods such as chicken and duck that have been irradiated due to the risk of salmonella infection. Establishment of wider possibilities to monitor foods will require an additional method. One such method used today for several foods is the thermoluminescence method. This procedure can be used on prawns and other marine fauna, on spices, and possibly also on strawberries and tomatoes. It is an established approach and is used today for controls in most countries. 37 refs, 12 figs, 2 tabs

  4. Management of water hyacinth. A CSC/UNEP project. Progress report

    International Nuclear Information System (INIS)

    1981-05-01

    The water hyacinth project was initially proposed at the Regional Workshop on Rural Technology held at Dacca in January 1978. In November 1978, national coordinators met at New Delhi and outlined the project in detail as reported in CSC(79)RT-4. The meeting was attended by delegates from Bangladesh, Egypt, Guyana, India, Malaysia, Papua New Guinea, Sri Lanka, Commonwealth Science Council and the United Nations Environment Programme. Following this a proposal was submitted to UNEP seeking funding support to meet the external cost component of the project. This support was subsequently granted. The project aims to achieve an integrated approach towards managing water hyacinth. The underlying intention was that management would cover both eradication of the plant as well as making productive use of it when possible. Productive uses envisaged include biogas synthesis, production of papers and boards and as a source of proteins. Another interesting possibility is the use of the plant to control industrial as well as domestic water pollution . All these were detailed in a three and a half year time plan. The project had its first review meeting in June 1979 in Papua New Guinea. The major intention of this meeting was to examine status reports from each country in an attempt to quantify the problem caused by water hyacinth and assess the work plan in relation to this. The report of this meeting has been published as CSC(79)RT-5. At this meeting Papua New Guinea decided to withdraw from this project as water hyacinth was not regarded as a severe problem. The use of dugong as a control agent was not recommended by Papua New Guinea. In April 1980 an interim review meeting attended by the Regional Coordinator and representatives of UNEP and CSC was held in London where, based on the progress made in the participating countries, activities and time schedules were refined and sharpened (CSC (80)RT-16). It look some time to resolve the external funding question . It was

  5. Effects of 3-AB on PARP expression of Hela cells and apoptosis and cell cycle progression of Hela cells after X-rays irradiation

    International Nuclear Information System (INIS)

    Du Xiang; Zhao Hongguang; Guo Wei; Gong Shouliang; Wang Wen

    2007-01-01

    Objective: To study the changes of apoptosis and cell cycle progression of Hela cells after the poly (ADP- ribose) polymerase (PARP) was inhibited by its inhibitor 3-aminobenzamid (3-AB) and the mechanisms of PARP interaction with Hela cells damaged by irradiation. Methods: Hela cell line was used. Flow cytometry (FCM) was used to examine the PARP expression of control and 3 AB groups at 0, 2, 4, 8, 12 h alter administration with 5 mmol·L -1 3-AB. The percentage of apoptotic cells and cell cycle progression ol control, irradiation, 3-AB plus irradiation groups were measured with FCM at 2, 8, 12, 24 h after exposure to 2 Gy irradiation following administration with 5 mmol·L -1 3-AB. Results: The percentage of Hela cells with positive expression of PARP protein decreased after administration with 3-AB and there was significant difference between 3-AB plus irradiation group and control group (P 2 cells in the 3-AB plus irradiation group were lower than those in the irradiation group (P 2 arrest induced by irradiation. (authors)

  6. Pilotscale studies of dried fish irradiation. Part of a coordinated programme in Asian Regional Cooperative Project on Food Irradiation

    International Nuclear Information System (INIS)

    Maha, M.

    1983-03-01

    Pilot scale experiments on irradiation of semi-dried mackerel with regard to shelf-life extension, packaging, transportation and cost-analysis were carried out. The results showed that dipping mackerel in saturated brine for 5 hours and then soaking it in 2% potassium sorbate before sun-drying to approximately 40% moisture content produced a good quality product. Sorbate treatment was effective in controlling mould growth while irradiation with 2 kGy was effective in reducing the bacterial load. Carton boxes were found most suitable as packaging material for irradiated dried fish from the point of view of strength, convenience for irradiation and better dose uniformity ratio than polypropylene bags which have ununiform configuration. Irradiation with doses up to 10 kGy has no significant effect on physical properties of the packaging materials tested. Carton boxes of 20 kg capacity provided with strapping bands are durable for land or sea transportation of dried fish. A radiation dose of 0.5 kGy was sufficient to control insect damage and reduce mould growth on dried fish. Irradiated dried fish can be marketed for 3-4 months at ambient conditions in Jakarta. Small scale consumer studies of irradiated samples using employees of the institute showed no negative reactions. Using the small pilot irradiator at CAIR and assuming 1 kGy minimum dose for dried fish, the total cost of irradiation and packaging was estimated to be approximately 10 U.S. cents/kg of fish, which is about 2-3% of the cost of the product

  7. Progress Report 16 for the period April-September 1980, and the proceedings of the 16th Project Integration Meeting

    Energy Technology Data Exchange (ETDEWEB)

    McDonald, R.R.

    1980-01-01

    Progress made by the Low-Cost Solar Array Project during the period April to September 1980, is reported in detail. Progress on project analysis and integration; technology development in silicon material, large-area silicon sheet and encapsulation; production process and equipment development; engineering, and operations is described. A report on, and copies of visual presentations made at, the Project Integration Meeting held September 24 and 25, 1980 are included.

  8. Repair of DNA treated with λ-irradiation and chemical carcinogens: Progress report (1983-1986)

    International Nuclear Information System (INIS)

    Goldthwait, D.A.

    1986-01-01

    This progress report summarizes work on DNA repair of chromatin and then details our progress in developing three model systems. These model systems center on signal transduction in cancer and in carcinogenesis. Molecular biological approaches to three model systems are being developed. The first involves signal transduction controlling sis gene (platelet derived growth factor-β) mRNA levels in human glioblastoma cells. The second involves signal transduction in the activation of a long terminal repeat. The third involves an experiment designed to detect a transposition event in a human cell

  9. One System Integrated Project Team Progress in Coordinating Hanford Tank Farms and the Waste Treatment Plant

    International Nuclear Information System (INIS)

    Skwarek, Raymond J.; Harp, Ben J.; Duncan, Garth M.

    2013-01-01

    The One System Integrated Project Team (IPT) was formed at the Hanford Site in late 2011 as a way to improve coordination and itegration between the Hanford Tank Waste Treatment and Immobilization Plant (WTP) and the Tank Operations Contractor (TOC) on interfaces between the two projects, and to eliminate duplication and exploit opportunities for synergy. The IPT is composed of jointly staffed groups that work on technical issues of mutal interest, front-end design and project definition, nuclear safety, plant engineering system integration, commissioning, planning and scheduling, and environmental, safety, health and quality (ESH&Q) areas. In the past year important progress has been made in a number of areas as the organization has matured and additional opportunities have been identified. Areas covered in this paper include: Support for development of the Office of Envirnmental Management (EM) framework document to progress the Office of River Protection's (ORP) River Protection Project (RPP) mission; Stewardship of the RPP flowsheet; Collaboration with Savannah River Site (SRS), Savannah River National Laboratory (SRNL), and Pacific Northwest National Laboratory (PNNL); Operations programs integration; and, Further development of the waste acceptance criteria

  10. Alloy development for irradiation performance. Quarterly progress report for period ending March 31, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Ashdown, B.G. (comp.)

    1980-06-01

    This report is organized along topical lines in parallel to a Program Plan of the same title so that activities and accomplishments may be followed readily relative to that Program Plan. Thus, the work of a given laboratory may appear throughout the report. Chapters 1, 2, 8, and 9 review activities on analysis and evaluation, test methods development, status of irradiation experiments, and corrosion testing and hydrogen permeation studies, respectively. These activities relate to each of the alloy development paths. Chapters 3, 4, 5, 6, and 7 present the ongoing work on each alloy development path. The Table of Contents is annotated for the convenience of the reader.

  11. Alloy development for irradiation performance. Quarterly progress report for period ending September 30, 1980

    International Nuclear Information System (INIS)

    1980-12-01

    This report is organized along topical lines in parallel to a Program Plan of the same title so that activities and accomplishments may be followed readily relative to that Program Plan. Thus, the work of a given laboratory may appear throughout the report. Chapters 1, 2, 8, and 9 review activities on analysis and evaluation, test methods development, status of irradiation experiments, and corrosion testing and hydrogen permeation studies, respectively. These activities relate to each of the alloy development paths. Chapters 3, 4, 5, 6, and 7 present the ongoing work on each alloy development path. The Table of Contents is annotated for the convenience of the reader

  12. Alloy development for irradiation performance. Quarterly progress report for period ending March 31, 1981

    International Nuclear Information System (INIS)

    1981-07-01

    This report is organized along topical lines in parallel to a Program Plan of the same title so that activities and accomplishments may be followed readily relative to that Program Plan. Thus, the work of a given laboratory may appear throughout the report. Chapters 1, 2, 8, and 9 review activities on analysis and evaluation, test methods development, status of irradiation experiments, and corrosion testing and hydrogen permeation studies, respectively. These activities relate to each of the alloy development paths. Chapters 3, 4, 5, 6, and 7 present the ongoing work on each alloy development path. The Table of Contents is annotated for the convenience of the reader

  13. Repair of DNA treated with lambda-irradiation and chemical carcinogens. Progress report, 1984-1985

    International Nuclear Information System (INIS)

    Goldthwait, D.A.

    1985-01-01

    Research progress is reported in the following areas: (1) DNA repair in HeLa cells; (2) a search for human transposable elements; (3) the effect of radiation and carcinogens on the activation of LTR sequences; and (4) studies on oncogenes of central nervous system tumors

  14. Research in radiobiology. Annual report of work in progress in the internal irradiation program

    International Nuclear Information System (INIS)

    Miller, S.C.

    1983-01-01

    Research progress on studies of the effects of internally deposited radionuclides in dogs, mice, and humans is reported. The studies include toxicity of plutonium 239, radium 226, and radium 224, the kinetics of actinides in beagles, and dosimetry of internal emitters

  15. Processing of Irradiated Graphite to Meet Acceptance Criteria for Waste Disposal. Results of a Coordinated Research Project

    International Nuclear Information System (INIS)

    2016-05-01

    Graphite is widely used in the nuclear industry and in research facilities and this has led to increasing amounts of irradiated graphite residing in temporary storage facilities pending disposal. This publication arises from a coordinated research project (CRP) on the processing of irradiated graphite to meet acceptance criteria for waste disposal. It presents the findings of the CRP, the general conclusions and recommendations. The topics covered include, graphite management issues, characterization of irradiated graphite, processing and treatment, immobilization and disposal. Included on the attached CD-ROM are formal reports from the participants

  16. Integrated studies of irradiated Philippine mangoes. Part of coordinated programme in Asian Regional Cooperative Project on Food Irradiation

    International Nuclear Information System (INIS)

    Manalo, J.A.

    1985-09-01

    Effects of combined treatment of hot water dip (50 deg. C for 5 min.) and irradiation (0.65 kGy) on technological and sensory qualities of Carabao mangoes were investigated. Mangoes that ripen to the yellow green stage during transport may be subjected to irradiation of combined hot water dip at 50 deg. C for 5 minutes and irradiation at 0.65 kGy. When stored at the low temperature of 12-15 deg. C, shelf life is extended further. Time interval between hot water dip and irradiation must be as short as possible and fruits must be stored at ambient temperature prior to irradiation to prevent discoloration. Shelf life studies show that green fruits subjected to combined treatment and stored at ambient temperature extended shelf life by 6 days, 50% of yellow green mangoes subjected to combined treatment exhibited shelf life extension by four days. Mangoes stored at cold temperature, whether immediately after irradiation or after ripening showed considerable reduction in bacterial decay, regardless of fruit maturity, thus extending their shelf life considerably. Results of sensory evaluation showed no marked differences in color, aroma, appearance, and acceptability were observed by the taste panelists and although controls were always rated higher than the treated samples, scores higher than 5 given to the treated samples showed that they were also generally acceptable

  17. The second Euratom sponsored 9000C HTR fuel irradiation experiment in the HFR Petten Project E 96.02: Pt.2. Post-irradiation examination

    International Nuclear Information System (INIS)

    Roettger, R.; Bueger, J. de; Schoots, T.

    1977-01-01

    A large variety of HTR fuel specimens, loose coated particles, coupons and compacts provided by Belgonucleaire, the Dragon Project and the KFA Juelich have been irradiated in the HFR at Petten at about 900 0 C up to a maximum fast neutron fluence of about 7x10 21 cm -2 (EDN) as a Euratom sponsored experiment. The maximum burn-ups were between 11 and 18.5% FIMA. The results of the post-irradiation examinations, comprising visual inspection, dimensional measurements, microradiography, metallography, and burn-up determinations are presented in this part 2 of the final report. The examinations have shown that the endurance limit of most of the tested fuel varieties is beyond the reached irradiation values

  18. Repair of DNA treated with λ-irradiation and chemical carcinogens: Progress report, 1983-1987

    International Nuclear Information System (INIS)

    Goldthwait, D.A.

    1987-08-01

    Studies on the in vitro enzymatic mechanisms of DNA repair of chromatin structures are described. In addition new studies on signal transduction in cancer and in carcinogenesis are emphasized. We are using molecular biological approaches to three model systems, which we are developing. The first involves signal transduction controlling sis gene (platelet derived growth factor-β) mRNA levels in human glioblastoma cells. The second involves signal transduction in the activation of a long terminal repeat. The third involves an experiment designed to detect a tranposition event in a human cell. This progress report will summarize work on DNA repair of chromatin and then detail our progress in developing the three model systems. 59 refs., 14 figs., 7 tabs

  19. Ultraviolet B irradiation induces expansion of intraepithelial tumor cells in a tissue model of early cancer progression.

    Science.gov (United States)

    Mudgil, Adarsh V; Segal, Nadav; Andriani, Frank; Wang, Youai; Fusenig, Norbert E; Garlick, Jonathan A

    2003-07-01

    Ultraviolet B irradiation is thought to enable skin cancer progression as clones of genetically damaged keratinocytes escape apoptosis and expand at the expense of adjacent normal cells. Mechanisms through which potentially malignant cells in human skin undergo clonal expansion, however, are not well understood. The goal of this study was to characterize the role of ultraviolet B irradiation on the intraepithelial expansion of early stage human tumor cells in organotypic skin cultures. To accomplish this, we have studied the effect of ultraviolet B irradiation on organotypic cultures that were fabricated by mixing normal human keratinocytes with beta-galactosidase-marked, intraepithelial tumor cells (HaCaT-ras, clone II-4), which bear mutations in both p53 alleles and harbor an activated H-ras oncogene. We found that when organotypic mixtures were exposed to an ultraviolet B dose of 50 mJ per cm2, intraepithelial tumor cells underwent a significant degree of proliferative expansion compared to nonirradiated cultures. To understand this response, organotypic cultures of nor-mal keratinocytes were exposed to ultraviolet B and showed a dose-dependent increase in numbers of sunburn cells and TUNEL-positive cells although their proliferation was suppressed. In contrast, neither the apoptotic nor the proliferative response of II-4 cells was altered by ultraviolet B in organotypic cultures. The differential response of these cell types suggested that II-4 cells were resistant to ultraviolet-B-induced alterations, which allowed these intraepithelial tumor cells to gain a selective growth and survival advantage relative to neighboring normal cells. These findings demonstrate that ultraviolet B exposure can induce the intraepithelial expansion of apoptosis-resistant, p53-mutant, and ras-activated keratinocytes, suggesting that this agent can act to promote the early stages of epithelial carcinogenesis.

  20. Irradiation induced modest changes in murine cardiac function despite progressive structural damage to the myocardium and microvasculature

    International Nuclear Information System (INIS)

    Seemann, Ingar; Gabriels, Karen; Visser, Nils L.; Hoving, Saske; Poele, Johannes A. te; Pol, Jeffrey F.; Gijbels, Marion J.; Janssen, Ben J.; Leeuwen, Fijs W. van; Daemen, Mat J.; Heeneman, Sylvia; Stewart, Fiona A.

    2012-01-01

    Background: Radiotherapy of thoracic and chest wall tumors increases the long-term risk of cardiotoxicity, but the underlying mechanisms are unclear. Methods: Single doses of 2, 8, or 16 Gy were delivered to the hearts of mice and damage was evaluated at 20, 40, and 60 weeks, relative to age matched controls. Single photon emission computed tomography (SPECT/CT) and ultrasound were used to measure cardiac geometry and function, which was related to histo-morphology and microvascular damage. Results: Gated SPECT/CT and ultrasound demonstrated decreases in end diastolic and systolic volumes, while the ejection fraction was increased at 20 and 40 weeks after 2, 8, and 16 Gy. Cardiac blood volume was decreased at 20 and 60 weeks after irradiation. Histological examination revealed inflammatory changes at 20 and 40 weeks after 8 and 16 Gy. Microvascular density in the left ventricle was decreased at 40 and 60 weeks after 8 and 16 Gy, with functional damage to remaining microvasculature manifest as decreased alkaline phosphatase (2, 8, and 16 Gy), increased von Willebrand Factor and albumin leakage from vessels (8 and 16 Gy), and amyloidosis (16 Gy). 16 Gy lead to sudden death between 30 and 40 weeks in 38% of mice. Conclusions: Irradiation with 2 and 8 Gy induced modest changes in murine cardiac function within 20 weeks but this did not deteriorate further, despite progressive structural and microvascular damage. This indicates that heart function can compensate for significant structural damage, although higher doses, eventually lead to sudden death.

  1. External irradiation facilities open for biological studies - progress in july 2005

    International Nuclear Information System (INIS)

    Gaillard-Lecanu, E.; Authier, N.; Verrey, B.; Bailly, I.; Bordy, J.M.; Coffigny, H.; Cortela, L.; Duval, D.; Leplat, J.J.; Poncy, J.L.; Testard, I.; Thuret, J.Y.

    2005-01-01

    The Life Science Division of the Atomic Energy Commission is making an inventory of the various radiation sources accessible for investigation on the biological effects of ionizing radiation. In this field, a wide range of studies is being carried out at the Life Science Division, attempting to characterize the kind of lesions with their early biological consequences (on the various cell compartments) and their late biological consequences (deterministic or stochastic effects), in relation to the radiation type and dose, especially at low doses. Several experimental models are available: plants, bacteria, eukaryotic cells from yeast up to mammalian cells and in vivo studies, mostly on rodents, in order to characterize the somatic late effects and the hereditary effects. Due to the significant cost of these facilities, also to their specific properties (nature of the radiation, dose and dose rate, possible accuracy of the irradiation at the molecular level), the closeness is no longer the only criteria for biologists to make a choice. The current evolution is to set up irradiation infrastructures combining ionizing radiation sources themselves and specific tools dedicated to biological studies: cell or molecular biology laboratories, animal facilities. The purpose, in this new frame, is to provide biologists with the most suitable facilities, and, if possible, to change these facilities according to requirements in radiobiology. In this report, the basics of interactions of ionizing radiation with biological tissues are briefly introduced, followed by a presentation of some of the facilities available for radiobiological studies especially at CEA. This panorama is not a comprehensive one, new data will be included as they advance, whether reporting existing facilities or if a new one is developed. (authors)

  2. Innovative approaches to the Management of Irradiated Nuclear Graphite Wastes: Addressing the Challenges through International Collaboration with Project 'GRAPA'

    International Nuclear Information System (INIS)

    Wickham, A.J.; Ojovan, M.; O'Sullivan, P.; )

    2017-01-01

    There exists more than 250.000 tonnes of irradiated (and therefore radioactive) nuclear graphite (i-graphite) in the world, primarily as a result of the development of graphite-moderated power-reactor systems, initially for defence and subsequently for commercial purposes. Only a very small number of such plants have been dismantled and, for most cases, the final destiny of the irradiated graphite remains unresolved. Future high-temperature reactor programmes, such as the Chinese HTR-PM development, will produce more graphite and carbonaceous wastes from both structural components and the fuel pebbles (which are approximately 96% carbonaceous), the latter producing a continuous stream of so-called 'operational waste'. The problem of dismantling irradiated graphite reactor stacks, possibly distorted through neutron damage and in some cases degraded further by radiation-chemical attack by gaseous coolants, and then finding the appropriate treatments and final destiny of the material, has exercised both the European Union and the International Atomic Energy Agency for more than 25 years, seeking to address the different issues and available disposal solutions in different IAEA Member States. An IAEA collaborative research programme on treatment options has recently been completed, and an active group of international specialists in this area has now been established as part of the IAEA International Decommissioning Network under the envelope of Project 'GRAPA' (Irradiated Graphite Processing Approaches), which includes representatives from Belgium, China, France, Germany, India, Italy, Lithuania, Rep. of Korea, Romania, Spain, Switzerland, Ukraine and the Russian Federation with direct responsibilities for various parts of the decommissioning and graphite-disposal process in a variety of reactor designs. Interest has also been expressed by colleagues from Sweden and Japan. Work is in progress on a number of topic areas where weaknesses in the

  3. Blood responses under chronic low daily dose gamma irradiation: Pt. 2; Differential preclinical responses of irradiated female dogs in progression to either aplastic anemia or myeloproliferative disease

    Energy Technology Data Exchange (ETDEWEB)

    Seed, T.; Carnes, B.; Tolle, D.; Fritz, T. (Argonne National Lab., IL (United States). Biological and Medical Research Div.)

    1993-05-01

    Female beagle dogs were chronically exposed to low daily doses of [sup 60]Co gamma rays and responded in one of three distinct hemopathological patterns. These patterns, reflective of distinct subgroups, were characterized by (a) low radioresistance resulting in progressive hematopoietic suppression, terminal aplastic anemia (AA), and relatively short (<400 days) survival ([sup -]S-AA subgroups); (b) high radioresistance, initially coupled with strong but aberrant regenerative hematopoiesis, and later with the development of myeloproliferative disease (MPD) ([sup +]-R-MPD subgroup); and (c) high radioresistance, coupled with an early phase of strong regenerative hematopoiesis, but later with no myeloproliferative disease ([sup +]R-nonMPD subgroup). In this study, the changes in circulating blood cells levels (granulocytes, monotcytes, erythrocytes, lymphocytes and platelets) were sequentially assessed in time and fitted to a flexible, quadratic-linear-type response model previously developed. The results are consistent with our earlier observations of blood responses of chronically irradiated male dogs, in the subgroups of female dogs prone to specific radiogenic hematopathologies (i.e. AA and MPD) can be readily identified and staged in specific preclinical periods by a series of marked differential blood responses. (Author).

  4. Results from Project on Enhancement of Aging Management and Maintenance in Nuclear Power Plants - Irradiation Embrittlement of RPV Steels -

    International Nuclear Information System (INIS)

    Abe, Hiroaki; Onizawa, Kunio; Katsuyama, Jinya; Murakami, Kenta; Iwai, Takeo; Iwata, Tadao; Katano, Yoshio; Sekimura, Naoto; Nagai, Yasuyoshi; Toyama, Takeshi; Tamura, Satoshi

    2012-01-01

    As one of the NISA Project on Enhancement of Aging Management and Maintenance in Nuclear Power Plants, we have performed research on the irradiation embrittlement of reactor pressure vessel (RPV) steels, especially focusing on irradiation embrittlement on heat affected zone (HAZ) and on applications of ion beams to deduce fundamental insights irradiation-induced embrittlement. The results obtained from the project are summarized as follows. In order to obtain the technical basis to judge the necessity of surveillance specimens from HAZ, the neutron irradiation program was performed at JRR-3, JAEA. The samples were carefully designed based on the insights from finite element analysis, metallography, 3D atom probe and positron annihilation methods, and were fabricated so as to simulate both heat treatment history and microstructure for typical HAZ from as-fabricated RPV steels which also have variation of impurity levels. The fracture toughness of the unirradiated HAZ specimens was equivalent to or better than that of base metals. Irradiation embrittlement and hardening were roughly identical to those of base metals, while some of the fine-grained HAZ microstructure was susceptible to it. The probabilistic fracture mechanics analysis was applied to the structural integrity assessment taking into account the heterogeneous microstructure as well as susceptibility for irradiation embrittlement of each HAZ microstructure under the variation of welding parameter and PTS condition. It was shown that crack propagation at the fine-grained HAZ, but the discontinuous distribution of the microstructure retards the further propagation. For the precise correlation of irradiation embrittlement of RPV steels for the long term operations, accumulations of high-dose data are required. Ion beam irradiation is one of the solutions for the regime and for mechanism-based descriptions. Another interest of ours was to describe irradiation hardening and embrittlement in terms of

  5. Irradiation effects on the rock-salt HAW-Asse Project

    International Nuclear Information System (INIS)

    Palut, J.M.

    1991-01-01

    Since 1988 ANDRA is involved in the HAW project, a test disposal of high level radioactive canisters in a salt dome, at Asse in FRG. ANDRA is responsible of in situ measurements, laboratory analyses and predictive calculations. Thus are delayed in situ dose measurements. Two methods have been developed, one is based on thermoluminescent dosemeters and measure an integrated dose, the other uses ionization chambers and gives a dose rate. Specific equipments had to be developed: manufacturing and testing. Geomechanics is also concerned by in situ measurement, especially rocksalt deformation, induced by the heat production of the canisters. Three groups of tiltmeters have been installed, providing informations on both natural creeping of rocksalt and effect of electrical heating in two boreholes. Laboratory studies consist in analyzing gases released by Asse salt samples irradiated under various conditions. Most of the 150 sample irradiations are completed. The last topic to the project intends to predict gamma ray flux and spectrum in the HAW test field using computer models. The work carried out and discussed includes digitalization of test data (sources, borehole lining, rocksalt), Bremsstrahlung sensitivity analysis, and calculation of both energy deposited and dose rate around the sources. This calculation was performed for 50 points, requiring 400 runs of Mercure-5 models. Interpolation functions are also provided in order to give values between these 50 points. The next step aim to determine gamma spectrum in salt and also energy deposited at various locations in the dummy canister where samples are intended to be emplaced. TRIPOLI-2 Model will be used for these purposes [fr

  6. Salt repository project: Technical progress report for the quarter 1 April--30 June 1987

    International Nuclear Information System (INIS)

    1987-01-01

    This document reports the progress being made each quarter on the development of a geologic repository in salt for the permanent disposal of high-level nuclear waste. The reporting elements are arranged by the work breakdown structure so that related studies are presented together. The studies are reported by the Office of Nuclear Waste Isolation, a prime contractor of the US Department of Energy (DOE) Salt Repository Project Office. The studies include work by other DOE prime contractors and by contractors to the Office of Nuclear Waste Isolation

  7. Salt Repository Project technical progress report for the quarter 1 January--31 March 1987

    International Nuclear Information System (INIS)

    1988-03-01

    This document reports the progress being made each quarter on the development of a geologic repository in salt for the permanent disposal of high-level nuclear waste. The reporting elements are arranged by the work breakdown structure so that related studies are presented together. The studies are reported by the Office of Nuclear Waste Isolation, a prime contractor of the US Department of energy (DOE) Salt Repository Project Office. The studies include work by other DOE prime contractors and by contractors to the Office of Nuclear Waste Isolation. 23 refs., 1 fig

  8. Analyzing compound and project progress through multi-objective-based compound quality assessment.

    Science.gov (United States)

    Nissink, J Willem M; Degorce, Sébastien

    2013-05-01

    Compound-quality scoring methods designed to evaluate multiple drug properties concurrently are useful to analyze and prioritize output from drug-design efforts. However, formalized multiparameter optimization approaches are not widely used in drug design. We rank molecules synthesized in drug-discovery projects using simple and aggregated desirability functions reflecting medicinal chemistry 'rules'. Our quality score deals transparently with missing data, a key requirement in drug-hunting projects where data availability is often limited. We further estimate confidence in the interpretation of such a compound-quality measure. Scores and associated confidences provide systematic insight in the quality of emerging chemical equity. Tracking quality of synthetic output over time yields valuable insight into the progress of drug-design teams, with potential applications in risk and resource management of a drug portfolio.

  9. Mapping Project on Energy and the Social Sciences. Progress report, October 1, 1978-June 30, 1979

    Energy Technology Data Exchange (ETDEWEB)

    Walker, C.A.; Doob, L.W.; Gould, L.C.

    1979-01-01

    This is a progress report of activities in the fourth year of the Yale Institution for Social and Policy Studies Mapping Project on Energy and the Social Sciences. The Mapping Project evaluates past and present social and behavioral science energy studies, assesses the potential for social and behavioral science contributions to a resolution of the energy problems in the future, and diffuses social and behavioral science information and perspectives to policymakers and others concerned with US or world energy developments. Activities in FY 1979 included meetings, workshops, collecting bibliographic material, publications, evaluating DOE programs in buildings and transportation, performing a special study of potential social impacts of 4 coal technologies, and developing plans for 10 specific research studies on energy.

  10. [Progress report on a World Bank loan to China for a tuberculosis control project].

    Science.gov (United States)

    Zhao, F; Chi, Y; Wang, K

    1995-02-01

    The progress of the World Bank loaned TB control project implemented from the second quarter of 1991 to the fourth quarter of 1993 was described in this paper. In the past three years, 737 counties of the 12 provinces with the population of 360 million has been covered by the project. Among 95176 new smear positive cases discovered, 93909 patients received free treatment of TB. The treatment coverage is 98.7%, of which 95% were treated under full course supervision. The smear conversion rate at two, three months of new smear positive TB patients are 83.4% and 90.6% respectively. The cohort analysis showed that the cure rate is 89.8%, which has reached the advanced level of the modern national tuberculosis control programme in the world.

  11. Crystalline Repository Project: Technical progress report for the period October 1, 1982--May 28, 1986

    International Nuclear Information System (INIS)

    1988-11-01

    This document reports the progress made on the development of a second geologic repository in crystalline rocks during the duration of the Crystalline Repository Project from its inception in October 1982 to its termination in May 1986. The reporting elements are arranged by the work breakdown structure so that related studies are presented together. The studies are reported by the Office of Waste Technology Development (OWTD), successor to the Office of Crystalline Repository Development. OWTD is a prime contractor of the US Department of Energy (DOE) Repository Technology Program Office, itself the successor to the Crystalline Repository Project Office. The studies include work by other DOE prime contractors and by contractors to the Office of Crystalline Repository Development. 151 refs

  12. Breeding study of hyper citric acid strain by progressive heavy ion irradiation

    International Nuclear Information System (INIS)

    Chen Jihong; Hu Wei; Li Wenjian; Liu Jing; Wang Shuyang; Wei Zihao

    2013-01-01

    Heavy "1"2C"6"+ ion beams in various high doses were employed to irradiate H3001 strain for screening Aspergillus niger strain for hyper citric acid production. Three high-yield strains were obtained after shaker fermentation test. Among the three strains, the strain hw317 was implemented shaker fermentation for stability test and 10∼100 L pilot fermentation tank for citric acid productive maximization. Acid-base neutralization method was applied to determinate the content of citric acid in fermented liquid. The results showed that: when the secondary heavy ion "1"2C"6"+ dose was 857.8 Gy, both of the fatality rate (94.5%) and the positive mutation rate (8%) were highest. Through the shaker fermentation tests and 10∼100 L pilot fermentation test, one strain hw317 was screened and obtained for hyper citric acid production. Consequently, the final citric acid acidity can reach up to 19.2±0.2% with controlling fermentation cycle for 60 h. (authors)

  13. Development and progression of karyotypic variability in melanoma K1735 following X-irradiation

    International Nuclear Information System (INIS)

    Wolman, S.R.; McMorrow, L.E.; Fidler, I.J.; Talmadge, J.E.

    1985-01-01

    Chromosomal aberrations are often assumed to be deleterious to cells. However, the authors have found that many metastases are populated by cells with chromosomal recombinants induced by radiation of the original tumor population. The tumor, K-1735-M2, was already capable of metastasis so that the recombinant chromosomes were not necessary for this property of the tumor. Stable recombinants, like other aberrant forms, could be disadvantageous or, alternatively, could confer selective advantage to some tumor cells. The authors investigated these possibilities by irradiating the parental tumor line and examining the formation and persistence of chromosomal markers in cell culture and in s.c. tumors. The karyotype of the K-1735-M2 parental tumor is composed entirely of telocentric chromosomes, and recombinant forms are relatively easy to recognize. Unstable forms of chromosome damage were lost rapidly. The frequency of stable recombinants after two weeks in culture was higher than that in tumors growing in primary inoculation sites. In contrast, secondary (spontaneous metastatic) foci showed a far greater frequency of chromosomal markers, suggesting a positive association between markers and acquisition of properties benefiting growth and metastasis

  14. The Role Of The Integrated, Thematic Project To Learning Progress Of The Child In The Early Period

    Directory of Open Access Journals (Sweden)

    Aida Cornelia Stoian

    2016-12-01

    Full Text Available In this study, we have proposed to present you the results of an empirical research in order to identify the positive aspects of the integrated, thematic project in learning progress of children in preschool. Using the observation method, we analyzed children's results regarding the objectives in the respect to the objectives in the grid. Children's progress in learning represents the confirmation and affirmation of the role of this integrated, thematic project in supporting the early learning child.

  15. Progress in R and D of coated conductor in M-PACC project

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, T.; Koizumi, T.; Kimura, K. [SWCC Showa Cable Systems Co., Ltd., Kanagawa (Japan); Kato, T. [Japan Fine Ceramics Center, Aichi (Japan); Kiss, T. [Kyushu University, Fukuoka (Japan); Izumi, T.; Ibi, A.; Nakaoka, K. [Superconductivity Research Laboratory, International Superconductivity Technology, Kanagawa (Japan); and others

    2014-06-15

    The five-year national project in Japan for R and D of coated conductors and applications, named as the Materials and Power Applications of Coated Conductors (M-PACC) project, was finished at the end of FY2013. The project consists of four sub-themes as cable, transformer, SMES and coated conductors. In the theme of coated conductors, the fabrication process had been developed to satisfy the requirements from the applications such as in-field I{sub c} performance, low AC loss in the long tapes etc. Through the project, the remarkable progress was achieved as follows; a high in-field minimum I-c value over 54A/cm-width under 3T at 77K was realized in a 200m long EuBCO tape with artificial pinning centers of BaHfO{sub 3} by the pulsed laser deposition (PLD) technique on the IBAD template. On the other hand, the AC loss reduction was confirmed in the tapes fabricated by both PLD and the metal organic deposition (MOD) techniques by scribing 100 m tapes into 10-filaments. Additionally, the mechanism of the delamination phenomenon was systematically investigated and the strength was improved by eliminating the origins of the weak points in the films. Through the development, all targeted goals were accomplished and the several results were appreciated as a world champion data.

  16. Characterization of caries progression on dentin after irradiation with Nd:YAG laser by FTIR spectroscopy and fluorescence imaging

    Science.gov (United States)

    Ana, P. A.; Brito, A. M. M.; Zezell, D. M.; Lins, E. C. C. C.

    2015-06-01

    Considering the use of high intensity lasers for preventing dental caries, this blind in vitro study evaluated the compositional and fluorescence effects promoted by Nd:YAG laser (λ=1064 nm) when applied for prevention of progression of dentin caries, in association or not with topical application of acidulated phosphate fluoride (APF). Sixty bovine root dentin slabs were prepared and demineralized by 32h in order to create early caries lesions. After, the slabs were distributed into six experimental groups: G1- untreated and not submitted to a pH-cycling model; G2- untreated and submitted to a pH-cycling model; G3- acidulated phosphate fluoride application (APF); G4- Nd:YAG irradiation (84.9 J/cm2, 60 mJ/pulse); G5- treated with Nd:YAG+APF; G6- treated with APF+Nd:YAG. After treatments, the samples of groups G2 to G6 were submitted to a 4-day pH-cycling model in order to simulate the progression of early caries lesions. All samples were characterized by the micro-attenuated total reflection technique of Fourier transformed infrared spectroscopy (μATR-FTIR), using a diamond crystal, and by a fluorescence imaging system (FIS), in which it was used an illuminating system at λ= 405±30 nm. Demineralization promoted reduction in carbonate and phosphate contents, exposing the organic matter; as well, it was observed a significant reduction of fluorescence intensity. Nd:YAG laser promoted additional chemical changes, and increased the fluorescence intensity even with the development of caries lesions. It was concluded that the compositional changes promoted by Nd:YAG, when associated to APF, are responsible for the reduction of demineralization progression observed on root dentin.

  17. Progress update of NASA's free-piston Stirling space power converter technology project

    Science.gov (United States)

    Dudenhoefer, James E.; Winter, Jerry M.; Alger, Donald

    1992-01-01

    A progress update is presented of the NASA LeRC Free-Piston Stirling Space Power Converter Technology Project. This work is being conducted under NASA's Civil Space Technology Initiative (CSTI). The goal of the CSTI High Capacity Power Element is to develop the technology base needed to meet the long duration, high capacity power requirements for future NASA space initiatives. Efforts are focused upon increasing system power output and system thermal and electric energy conversion efficiency at least five fold over current SP-100 technology, and on achieving systems that are compatible with space nuclear reactors. This paper will discuss progress toward 1050 K Stirling Space Power Converters. Fabrication is nearly completed for the 1050 K Component Test Power Converter (CTPC); results of motoring tests of the cold end (525 K), are presented. The success of these and future designs is dependent upon supporting research and technology efforts including heat pipes, bearings, superalloy joining technologies, high efficiency alternators, life and reliability testing, and predictive methodologies. This paper will compare progress in significant areas of component development from the start of the program with the Space Power Development Engine (SPDE) to the present work on CTPC.

  18. Action of caffeine on x-irradiated HeLa cells. IV. Progression delays and enhanced cell killing at high caffeine concentrations

    International Nuclear Information System (INIS)

    Tolmach, L.J.; Busse, P.M.

    1980-01-01

    The response of x-irradiated and unirradiated HeLa S3 cells to treatment with caffeine at concentrations between 1 and 10 nM has been examined with respect to both delay in progression through the cell generation cycle and enhancement of the expression of potentially lethal x-ray damage. Progression is delayed in a concentration-dependent fashion: the generation time is doubled at about 4 mM. The duration of G 1 is lengthened, and the rate of DNA synthesis is reduced, although the kinetics are different in the two phases; the rate of DNA synthesis is usually unaffected at 1 or 2 mM, while there is no concentration threshold for the slowing of progression through G 1 . Progression through G 2 appears to be unaffected by concentrations up to at least 10 mM. Killing of irradiated cells in G 2 is somewhat greater after treatment with the higher caffeine concentrations than reported previously for 1 mM. Moreover, an additional mode of killing is observed in irradiated G 1 cells which had been found previously to be only slightly affected by 1 mM caffeine; they suffer extensive killing at concentrations above 5 mM. The time-survival curves for irradiated, caffeine-treated G 1 and G 2 cells have characteristically different shapes. The dose-survival curves for cells treated with the higher caffeine concentrations display steeper terminal slopes and narrower shoulders

  19. Low-level x-irradiation of the brain during development: morphological, physiological, and behavioral consequences. Progress report, September 1, 1974--August 31, 1975

    International Nuclear Information System (INIS)

    Altman, J.

    1975-01-01

    Progress is reported on studies on the effects of exposure to low-dose x radiation on the developing brain of rats. Brief summaries of results of morphological, physiological, and behavioral studies on rats exposed using various x-irradiation schedules are included. A list of papers published and submitted for publication during the period is included. (U.S.)

  20. The Text of the Project Agreement between the Agency and Argentina regarding Arrangements for the Transfer of Irradiation Equipment

    International Nuclear Information System (INIS)

    1969-01-01

    The text of the Project Agreement between the Agency and the Government of Argentina Regarding Arrangements for the Transfer of Irradiation Equipment is reproduced in this document for the information of all Members. The Agreement entered into force on 3 June 1969.

  1. Yucca Mountain Project - Argonne National Laboratory annual progress report, FY 1994

    Energy Technology Data Exchange (ETDEWEB)

    Bates, J.K.; Fortner, J.A.; Finn, P.A.; Wronkiewicz, D.J.; Hoh, J.C.; Emery, J.W.; Buck, E.C.; Wolf, S.F.

    1995-02-01

    This document reports on the work done by the Nuclear Waste Management Section of the Chemical Technology Division (CMT), Argonne National Laboratory, in the period October 1993-September 1994. Studies have been performed to evaluate the performance of nuclear waste glass and spent fuel samples under unsaturated conditions (low volume water contact) that are likely to exist in the Yucca Mountain environment being considered as a potential site for a high-level waste repository. Tests with simulated waste glasses have been in progress for over eight years and demonstrate that actinides from initially fresh glass surfaces will be released as a result of the spallation of reacted glass layers from the surface, as the small volume of water passes over the waste form. Studies are also underway to evaluate the performance of spent fuel samples and unirradiated UO{sub 2} in projected repository conditions. Tests with UO{sub 2} have been ongoing for nine years and show that the oxidation of UO{sub 2} occurs rapidly, and the resulting paragenetic sequence of secondary phases that form on the sample surface is similar to that observed in natural analogues. The reaction of spent fuel samples under conditions similar to those used with UO{sub 2} have been in progress for nearly two years, and the results suggest that spent fuel follows the same reaction progress as UO{sub 2}. The release of individual fission products and transuranic elements was not congruent, with the release being controlled by the formation of small particles or colloids that are suspended in solution and transported away from the waste form. The reaction progress depends on the composition of the spent fuel samples used and, likely, on the composition of the groundwater that contacts the waste form.

  2. Low-Cost Solar Array Project. Progress report 12, January-April 1979 and proceedings of the 12th Project Integration Meeting

    Energy Technology Data Exchange (ETDEWEB)

    1979-01-01

    This report describes progress made by the Low-Cost Solar Array Project during the period January through April 1979. It includes reports on project analysis and integration; technology development in silicon material, large-area sheet silicon, and encapsulation; production process and equipment development; engineering and operations, and a discussion of the steps taken to integrate these efforts. It includes a report on, and copies of viewgraphs presented at the Project Integration Meeting held April 4-5, 1979.

  3. Petrofabric changes in heated and irradiated salt from Project Salt Vault, Lyons, Kansas

    International Nuclear Information System (INIS)

    Holdoway, K.A.

    1972-01-01

    Rock salt was heated and irradiated in situ by implanted radioactive wastes during the Project Salt Vault experiment which was carried out at Lyons, Kansas, in the abandoned Carey Salt mine between 1965 and 1967. It was found that irradiation results in coloration of the salt, producing colors ranging from blue-black nearest the radiation source, to pale blue and purple farther from the source. Bleached areas are common in the radiation-colored salt, many representing trails produced by the migration of fluid inclusions towards the heat source. These visible trails are thought to have formed during the cooling down of the salt after the removal of the heaters and radiation sources. The distribution of primary structures in the salt suggests that little migration, if any, occurred during the course of the experiment. It is proposed that radiolysis of the brine within the inclusions may have led to the production of gases which impeded or prevented migration. Evidence of strain was observed in slip planes at 4 in. (10 cm) and between 5.5 and 10 in. (13.5 to 25.4 cm) from the array hole. Deformed bleached areas in the salt between the areas were slip planes are developed suggest that slight plastic deformation or flow may have occurred at 6 in. (15 cm) from the array hole. Differential thermal analysis shows that the maximum amount of stored energy also occurs at 6 in. (15 cm) from the array hole. This region may therefore represent the zone where the combined effect of stress and radiation was greatest

  4. STYLE - A European project on structural integrity: Progress of the work after 2 Years

    International Nuclear Information System (INIS)

    Heussner, Stefan; Nicak, Tomas; Keim, Elisabeth

    2012-01-01

    The purpose of this paper is to present the progress of the work on the EURATOM project STYLE (Structural integrity for lifetime management - non-RPV components). The project focuses on the structural integrity assessment of reactor coolant pressure boundary components (RCPB) relevant to ageing and life time management. The 4-years project started in January 2010 and is now in its third year. Within STYLE realistic failure models for some of the key components will be identified. The range of assessment tools considered will include those for assessment of component failure by advanced fracture mechanics analyses validated on small and large scale experiments, quantification of weld residual stresses by numerical analysis and by measurements, stress corrosion crack initiation and growth effects and assessment of RCPB components (excluding the reactor pressure vessel) under dynamic and seismic loading. Based on theoretical and experimental results, performance assessment and further development of simplified engineering assessment methods (EAM) will be carried out considering both deterministic and probabilistic approaches. Integrity assessment case studies and large scale demonstration experiments will be performed on Mock-ups of safety relevant components. These will include a repair weld in an aged butt-welded austenitic pipe, a dissimilar narrow gap TIG weld (following the EPR design) and a cladded ferritic pipe. Moreover, experiments on specimens and feature test pieces will be carried out to support the large scale Mock-up analyses. The end product of the project ('STYLE TOOLS') will comprise best practice guidelines on the use of advanced tools, on improvement and qualification of EAM as a part of European Leak-before-break (LBB) procedures and on life time management of the integrity of RCPB components in European nuclear power plants. The project is interacting with the European Network of Excellence NUGENIA (former NULIFE). (author)

  5. Ceramic Technology Project, semiannual progress report for October 1993 through March 1994

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, D.R.

    1994-09-01

    The Ceramic Technology Project was originally developed by the Department of Energy`s Office of Transportation Systems (OTS) in Conservation and Renewable Energy. Significant accomplishments in fabricating ceramic components for the Department of Energy (DOE), National Aeronautics and Space Administration (NASA), and Department of Defense (DoD) advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. An assessment of needs was completed, and a five-year project plan was developed with extensive input from private industry. In July 1990, the original plan was updated through the estimated completion of development in 1993. The original objective of the project was to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. During the course of the Ceramic Technology Project, remarkable progress has been made in the development of reliable structural ceramics. The direction of the Ceramic Technology Project is now shifting toward reducing the cost of ceramics to facilitate commercial introduction of ceramic components for near-term engine applications. In response to extensive input from industry, the plan is to extend the engine types which were previously supported (advanced gas turbine and low-heat-rejection diesel engines) to include near-term (5-10 years) applications in conventional automobile and diesel truck engines. To facilitate the rapid transfer of this technology to U.S. industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities. A systematic approach to reducing the cost of components is envisioned.

  6. The development of KMRR schedule and progress control system (KSPCS) for the master schedule of KMRR project

    International Nuclear Information System (INIS)

    Choi, Chang Woong; Lee, Tae Joon; Kim, Joon Yun; Cho, Yun Ho; Hah, Jong Hyun

    1993-07-01

    This report was to development the computerized schedule and progress control system for the master schedule of KMRR project with ARTEMIS 7000/386 CM (Ver. 7.4.2.) based on project management theory (PERT/CPM, PDM, and S-curve). This system has been efficiently used for KMRR master schedule and will be utilized for the detail scheduling of KMRR project. (Author) 23 refs., 26 figs., 52 tabs

  7. Contracts for field projects and supporting research on enhanced oil recovery. Progress review number 83, quarter ending June 30, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-08-01

    Summaries of 41 research projects on enhanced recovery are presented under the following sections: (1) chemical flooding; (2) gas displacement; (3) thermal recovery; (4) geoscience technology; (5) resource assessment technology; and (6) reservoir classes. Each presentation gives the title of the project, contract number, research facility, contract date, expected completion data, amount of the award, principal investigator, and DOE program manager, and describes the objectives of the project and a summary of the technical progress.

  8. The development of KMRR schedule and progress control system (KSPCS) for the master schedule of KMRR project

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Chang Woong; Lee, Tae Joon; Kim, Joon Yun; Cho, Yun Ho; Hah, Jong Hyun [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1993-07-01

    This report was to development the computerized schedule and progress control system for the master schedule of KMRR project with ARTEMIS 7000/386 CM (Ver. 7.4.2.) based on project management theory (PERT/CPM, PDM, and S-curve). This system has been efficiently used for KMRR master schedule and will be utilized for the detail scheduling of KMRR project. (Author) 23 refs., 26 figs., 52 tabs.

  9. Proton Irradiation Impacts Age Driven Modulations of Cancer Progression Influenced by Immune System Transcriptome Modifications from Splenic Tissue

    Data.gov (United States)

    National Aeronautics and Space Administration — Age plays a crucial role in the interplay between tumor and host; with further perturbations induced by irradiation. Proton irradiation on tumors induces biological...

  10. Food irradiation

    International Nuclear Information System (INIS)

    Anon.

    1985-01-01

    The article explains what radiation does to food to preserve it. Food irradiation is of economic importance to Canada because Atomic Energy of Canada Limited is the leading world supplier of industrial irradiators. Progress is being made towards changing regulations which have restricted the irradiation of food in the United States and Canada. Examples are given of applications in other countries. Opposition to food irradiation by antinuclear groups is addressed

  11. Progress of and future plans for the L-4 Blanket Project

    International Nuclear Information System (INIS)

    Daenner, W.; Ioki, K.; Cardella, A.

    2001-01-01

    The ITER L-4 Blanket Project has achieved substantial progress over the last two years. The qualification of materials so far considered as reference for the shield module fabrication has been completed, as well as the developments for joining the triplex First Wall structure. Several Primary Wall, baffle, and limiter mock-ups have been manufactured and tested showing comfortable margins against the loads expected in ITER. Shield prototypes have been manufactured by conventional and advanced technology, which have finally demonstrated the manufacturing feasibility. More recently, activities for the qualification of the module attachment system have been started, and first results from materials and mock-up tests have become available. Several test campaigns are still to be finished to complete the data base for the design. In the meantime, further activities have been initiated to adapt the R and D programme to the ITER-FEAT design features, with the aim to further reduce the cost. (author)

  12. Development of new techniques of using irradiation in the genetic improvement of warm season grasses and an assessment of the genetic and cytogenetic effects. Progress report, November 1, 1977--October 31, 1978

    International Nuclear Information System (INIS)

    Hanna, W.W.; Burton, G.W.

    1978-05-01

    Progress is reported on plant breeding programs for the genetic improvement of warm season grasses using irradiation as a tool. Data are included from studies on alteration of the protein quantity and quality in pearl millet grain by irradiation and mutation breeding; the effects of nitrogen and genotype on pearl millet grain; the effects of seed size on quality in pearl millet; irradiation breeding of sterile triploid turf Bermuda grasses; irradiation breeding of sterile coastcross-1, a forage grass, to increase winter hardiness; use of irradiation to induce resistance to rust disease; and an economic assessment of irradiation-induced mutants for plant breeding programs

  13. General-purpose heat source project and space nuclear safety and fuels program. Progress report

    International Nuclear Information System (INIS)

    Maraman, W.J.

    1980-02-01

    Studies related to the use of 238 PuO 2 in radioisotopic power systems carried out for the Advanced Nuclear Systems and Projects Division of LASL are presented. The three programs involved are: general-purpose heat source development; space nuclear safety; and fuels program. Three impact tests were conducted to evaluate the effects of a high temperature reentry pulse and the use of CBCF on impact performance. Additionally, two 238 PuO 2 pellets were encapsulated in Ir-0.3% W for impact testing. Results of the clad development test and vent testing are noted. Results of the environmental tests are summarized. Progress on the Stirling isotope power systems test and the status of the improved MHW tests are indicated. The examination of the impact failure of the iridium shell of MHFT-65 at a fuel pass-through continued. A test plan was written for vibration testing of the assembled light-weight radioisotopic heater unit. Progress on fuel processing is reported

  14. Modelling gas migration in fractured rock. A contribution to the EU's PROGRESS project

    International Nuclear Information System (INIS)

    Humm, J.; Robinson, P.; Clark, K.

    2001-01-01

    To assess the performance of a waste repository, it is necessary to be able to predict the rates of gas generation and to understand and evaluate both the way the gas may disperse from the repository and any effects that might be associated with this dispersal. This document describes the modelling work carried out by QuantiSci on behalf of the UK Environment Agency, in conjunction with the CEC PROGRESS Project (Research into Gas Generation and Migration in Radioactive Waste Repository Systems) which has been carried out as part of the European Commission's IV th framework R and D programme. The project was under the PEGASUS (Projects on the Effects of GAS in Underground Storage facilities) umbrella. A review is provided of alternative conceptual models for the migration of gas through an initially water saturated fracture. A range of front or interface tracking methods for computing gas migration through a fracture is described: direct discretisation, marker particle, volume of fluids and level set methods. Volume of fluids methods are identified as the most appropriate approach for models of this sort. Subsequently, a description is given of the development of a model of gas injection into a single fracture in a portion of Borrowdale Volcanic Granite. The theoretical approach for the model is described in detail and the model compared to experimental results obtained for the real fracture. The experimental results of the CEC PROGRESS Project (obtained using Positron Emission Tomography) do not show particularly good agreement with the model results. However, there are strong indications that this is largely the result of uncertainties in the interpretation of the PET results. The experimental results are acknowledged to be extremely hard to interpret and the apparent negative gas thicknesses observed experimentally confirm this fact. Given the clearly critical dependence of the gas migration pathways on the aperture distribution, any discrepancies of this sort

  15. Final report on the project research 'stochastic effects of irradiation and risk estimation'

    International Nuclear Information System (INIS)

    1989-03-01

    The title project research was carried out through 1983-1987, by three groups for the studies of radiation carcinogenesis, human genetic effects, and radiotoxicology. 8 reports by the first group, 3 by the second, and 6 by the third group are collected in this issue. The contents are as follows. Serial sacrifice study on tumorigenesis in male C57BL/6J mice exposed to gamma-ray or fast neutron radiation; Influence of biological variables on radiation carcinogenesis; Studies on radiation-induced thymic lymphomagenesis; Modifying factors of radiation induced myeloid leukemia of C3H/He mouse; Cell kinetic studies on radiation induced leukemogenesis; Cytogenetical studies on the mechanism of radiation induced neoplasmas; Molecular biological study on genetic stability of the genome; Protein factors regulating proliferation and differentiation of normal and neoplastic cells; Studies on dose-radiation relationships for induction of chromosome abberations in stem-spermatogonia of three crab-eating monkey after low and high dose rate γ-irradiation; Risk estimation of radiation mutagenesis in man by using cultured mammalian cells; Effects of ionizing radiation on male germ cells of crabeating monkey; Movement and metabolism of radioactive particles in the respiratory tract; Studies on dosimetry for internally deposited alpha-emitters; Comparative toxicological studies on the effects of internal exposures; Studies on treatment of alpha-radioactive wastes; Methodological studies on the inhalation of radioactive aerosols; Removal of transuranic elements by DTPA. (A. Y.)

  16. Post-irradiation examination of a 13000C-HTR fuel experiment Project J 96.M3

    International Nuclear Information System (INIS)

    Bueger, J. de; Roettger, H.

    1977-01-01

    A large variety of loose coated fuel particles have been irradiated in the BR2 at Mol/Belgium at temperatures between 1200 0 C and 1400 0 C and up to a fast neutron fluence of 1.2x1022 cm -2 (E>0.1 MeV) as a Euratom sponsored experiment for the advanced testing of HTR fuel. The specimens have been provided by Belgonucleaire and the Dragon Project. A short description of the experiment as well as the results of post-irradiation examination mainly carried out at Petten (N.H.), The Netherlands, are presented here. The post-irradiation examination has shown that the required performance can be achieved by a number of the tested fuel specimens without serious damage

  17. CO2 laser irradiation enhances CaF2 formation and inhibits lesion progression on demineralized dental enamel-in vitro study.

    Science.gov (United States)

    Zancopé, Bruna R; Rodrigues, Lívia P; Parisotto, Thais M; Steiner-Oliveira, Carolina; Rodrigues, Lidiany K A; Nobre-dos-Santos, Marinês

    2016-04-01

    This study evaluated if Carbon dioxide (CO2) (λ 10.6 μm) laser irradiation combined with acidulated phosphate fluoride gel application (APF gel) enhances "CaF2" uptake by demineralized enamel specimens (DES) and inhibits enamel lesion progression. Thus, two studies were conducted and DES were subjected to APF gel combined or not with CO2 laser irradiation (11.3 or 20.0 J/cm(2), 0.4 or 0.7 W) performed before, during, or after APF gel application. In study 1, 165 DES were allocated to 11 groups. Fluoride as "CaF2 like material" formed on enamel was determined in 100 DES (n = 10/group), and the surface morphologies of 50 specimens were evaluated by scanning electron microscopy (SEM) before and after "CaF2" extraction. In study 2, 165 DES (11 groups, n = 15), subjected to the same treatments as in study 1, were further subjected to a pH-cycling model to simulate a high cariogenic challenge. The progression of demineralization in DES was evaluated by cross-sectional microhardness and polarized light microscopy analyses. Laser at 11.3 J/cm(2) applied during APF gel application increased "CaF2" uptake on enamel surface. Laser irradiation and APF gel alone arrested the lesion progression compared with the control (p enamel surface and a synergistic effect was found. However, regarding the inhibition of caries lesion progression, no synergistic effect could be demonstrated. In conclusion, the results have shown that irradiation with specific laser parameters significantly enhanced CaF2 uptake by demineralized enamel and inhibited lesion progression.

  18. School-Camp Project: progress and prospects; Projeto Campo-Escola: avancos e perspectivas

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira Junior, Jose Baptista de; Pacheco, Almi Cabral; Souza, Thiago Teixeira; Medeiros Junior, Luiz; Santanna, Vanessa Cristina [Universidade Federal da Bahia (UFBA), Salvador, BA (Brazil). Projeto Campo-Escola

    2008-07-01

    The Field-School Project (PCE) was created through an agreement signed in 2003 between the Brazilian Regulatory Petroleum Agency (ANP) and the Federal University of Bahia. The main objectives of the Project were: implementation of a programme of technology transfer to institutions of federal education, and training of specialist for the sector of E and P of oil and gas, from the use of oil fields. Besides that, to demonstrate to small entrepreneurs that it is possible to exploit oil fields at low cost. Nowadays, the PCE has 02 fully equipped camps. The field of Quiambina, with a single well, was the first revitalized field. Equipped with mechanical elevation, it achieved a production of 19,000 bbl of oil until April 2008. The second revitalized field (Fazenda Mamoeiro), also with a single well, is already equipped for the production of gas and oil. Gas will be its primary product. The start of production of this field is planned for July 2008. Apart from these fields, the PCE also has three more: Bela Vista, Caracatu and Riacho Sesmaria. They were also designated by the ANP to integrate the PCE in Bahia. This article shows the progress and prospects for PCE, with emphasis to the field of Fazenda Mamoeiro in its imminent start of production. (author)

  19. S.E.N.S.I.B. project. Progress report 2006; Projet SENSIB. Rapport d'avancement 2006

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    This report presents the state of progress of all the studies which establish at present the S.E.N.S.I.B. project. For year 2006, the progress of the project is globally in compliance with the general schedule of realization of the S.E.N.S.I.B. project and with the perspectives announced in 2005. Factors of sensitivity were identified in diverse circles ( thematic studies) and methods and specific tools of the project are developed. 14 publications (reviews and congress) and 9 I.R.S.N. reports were produced. An international work group was launched to the I.R.S.N. initiative. The web site of S.E.N.S.I.B. on the I.R.S.N. scientific site was built. The S.E.N.S.I.B. project receives a financial participation of the Ademe. (N.C.)

  20. Mock-up experiments for the project of high dose irradiation on the RPV concrete

    International Nuclear Information System (INIS)

    Zdarek, J.; Brabec, P.; Frybort, O.; Lahodova, Z.; Vit, J.; Stemberk, P.

    2015-01-01

    Aging of NPP's concrete structures comes into growing interest in connection with solution of life extension programmes of operated units. Securing continued safe operation of NPPs calls for additional proofs of suitable long term behaviour of loaded reinforced concrete structures. An irradiation test of concrete samples was performed in the core of the LVR-15 reactor. The irradiation capsule was hung in the irradiation channel and the cooling of the capsule was ensured through direct contact of the capsule wall with the primary circuit water. Cylindrical, serpentine concrete samples (50 mm in diameter and 100 mm in length), representing composition of WWER RPV cavity, was chosen as a compromise of mechanical properties testing needs and dimension limitations of reactor irradiation channel. Heating during irradiation test was maintained under 93 Celsius degrees by cooling and was controlled by embedded thermocouple. Design of the cooling management was supported by computational analysis. The dependencies of heated concrete samples to the neutron fluence and the gamma heating were obtained by changing the thermal power of the reactor and by changing the vertical position of the sample in the irradiation channel. The irradiation capsule was filled with inert gas (helium) to allow the measurement of generated gas. The determination of concrete samples activity for long-term irradiation was performed on the principles of the Neutron Activation Analysis. Preliminary mock-up tests have proved the ability to fulfill technical needs for planned high dose irradiation experiment

  1. Waste Tank Organic Safety Project organic concentration mechanisms task. FY 1994 progress report

    International Nuclear Information System (INIS)

    Gerber, M.A.

    1994-09-01

    The Pacific Northwest Laboratory (PNL), Waste Tank Organic Safety Project is conducting research to support Westinghouse Hanford Company's (WHC) Waste Tank Safety Program, sponsored by the U.S. Department of Energy's Tank Farm Project Office. The goal of PNL's program is to provide a scientific basis for analyzing organics in Hanford's underground storage tanks (USTs) and for determining whether they are at concentrations that pose a potentially unsafe condition. Part of this research is directed toward determining what organic concentrations are safe by conducting research on organic aging mechanisms and waste energetics to assess the conditions necessary to produce an uncontrolled energy release in tanks due to reactions between the organics and the nitrate and nitrate salts in the tank wastes. The objective of the Organic Concentration Mechanisms Task is to assess the degree of localized enrichment of organics to be expected in the USTs due to concentration mechanisms. This report describes the progress of research conducted in FY 1994 on two concentration mechanisms of interest to the tank safety project: (1) permeation of a separate organic liquid phase into the interstitial spaces of the tank solids during the draining of free liquid from the tanks; and (2) concentration of organics on the surfaces of the solids due to adsorption. Three experiments were conducted to investigate permeation of air and solvent into a sludge simulant that is representative of single-shell tank sludge. The permeation behavior of air and solvent into the sludge simulant can be explained by the properties of the fluid pairs (air/supernate and solvent supernate) and the sludge. One important fluid property is the interfacial tension between the supernate and either the solvent or air. In general, the greater the interfacial tension between two fluids, the more difficult it will be for the air or solvent to displace the supernate during dewatering of the sludge

  2. [Research progresses of the completed pediatrics projects funded by National Natural Science Foundation of China from 2002 to 2006].

    Science.gov (United States)

    Xu, Ling; Hao, Jie; Deng, Min; Xu, Yan-ying

    2009-05-01

    To understand the projects completion and research progresses in pediatrics which were funded by the National Natural Science Foundation of China (NSFC), and evaluate the accomplishment objectively and justly. The completion status of projects in pediatrics funded by department of clinical medicine II from 2002 to 2006 was analysed retrospectively, and important research achievement and outstanding development in some projects were reported. During the period between 2002 and 2006, 420 articles were published, and the average was 8.1 papers per project, which included 56 papers that were published in journals indexed by SCI (the average was 1.1 papers per project). The completion of general project was better than that of "the Young Researchers Fund" and small grant project. Ten post-doctors, 102 doctors and 109 masters were trained. Two projects were awarded with the first grade prize and another 2 with the second grade prize at the provincial and ministerial level, 4 items applied for patent and 1 was granted. These completed projects, which were mainly related to 7 of 12 subspecialties in the field of pediatrics, such as the respiratory disease, nephrology, neurology, cardiology, endocrinology, hematology, neonatology, are the major portion of the application projects and subsidized projects funded by NSFC, and achieved great research progresses. During the period between 2002 and 2006, the 52 completed projects in pediatrics showed difference in the distribution and quality of accomplishment among subspecialties and among types of supported projects; there are some gaps between pediatrics and some other clinical basic subspecialties II, this situation released the research status and problems in development of pediatrics in China. The general projects completion was good, and many projects obtained research achievements, which reflect the leading function of NSFC in pediatric research.

  3. Intense neutron irradiation facility for fusion reactor materials

    Energy Technology Data Exchange (ETDEWEB)

    Noda, Kenji; Oyama, Yukio; Kato, Yoshio; Sugimoto, Masayoshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1997-03-01

    Technical R and D of d-Li stripping type neutron irradiation facilities for development of fusion reactor materials was carried out in Fusion Materials Irradiation Test Facility (FMIT) project and Energy Selective Neutron Irradiation Test Facility (ESNIT) program. Conceptual design activity (CDA) of International Fusion Materials Irradiation Facility (IFMIF), of which concept is an advanced version of FMIT and ESNIT concepts, are being performed. Progress of users` requirements and characteristics of irradiation fields in such neutron irradiation facilities, and outline of baseline conceptual design of IFMIF were described. (author)

  4. ERG [Engineering Review Group] review of the SRP [Salt Repository Project] salt irradiation effects program: Technical report

    International Nuclear Information System (INIS)

    Clark, D.E.

    1986-11-01

    The Engineering Review Group (ERG) was established by the Office of Nuclear Waste Isolation (ONWI) to help evaluate engineering-related issues in the US Department of Energy's nuclear waste repository program. The August 1985 meeting of the ERG reviewed the Salt Repository Project (SRP) salt irradiation effects program. This report documents the ERG's comments and recommendations on these subjects and the ONWI response to the specific points raised by the ERG

  5. Irradiated sewage sludge for application to cropland. Results of a co-ordinated research project

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-10-01

    -ordinated Research Project on the Use of Irradiated Sewage Sludge to Increase Soil Fertility and Crop Yields and to Preserve the Environment between 1995 and 2000. The overall objective was to assist national institutes from Member States to develop management practices for the efficient use of sewage sludge as an organic fertilizer for increasing and sustaining crop production and soil fertility in an environmentally sound manner. Twelve contract holders from Argentina, Bangladesh, China, Egypt, India, Indonesia, Malaysia, Pakistan, Portugal, Romania, Sweden, and Thailand, and five agreement holders from Austria, Germany, Japan, the United States of America, and the United Kingdom participated in the project. The first Research Co-ordination Meeting (RCM) was held 10-14 July 1995 in Vienna, the second RCM 14-18 September 1996 in Cairo, Egypt, the third RCM 22-26 June 1998 in Oeiras, Portugal, and the fourth RCM was held 20-24 September 1999 in Serdang, Malaysia.

  6. Monitoring external irradiation FI4P CT96 0049 final project overview

    International Nuclear Information System (INIS)

    Wahl, W.; Wielunski, M.; Andrasi, A.; Palfalvi, J.; Schmitzer, C.; Stadtmann, H.

    1999-08-01

    This project is devoted to the innovative development of more sensitive and more specific methods for the monitoring of external radiation, as described in the 4th framework programme Nuclear Fission Safety executive work program item D.2.5. The general topic ('Evaluation of Radiation Risk') defines the area of radiation protection where this research effort is located. Hence, the rational behind such a project is the extension of knowledge about the risk of human exposure by improving the detection methodology. This may be achieved by enhancing the sensitivity of the detection element, by exploiting more detailed information on the type and energy of radiation, and by in depth understanding of the photon and neutron interaction in order to aid the interpretation of acquired data. The radiation may be characterised per se, i.e. free in air, however, more relevant for practical purposes are the interaction processes with matter. Since this interaction of radiation with neighbouring bodies - or the material composition of the measuring element itself - must not be neglected, the involvement of phantoms both in the modelling process and the experimental verification was proposed. The overall objective of this project, therefore, is the modelling and the development of an innovative semiconductor sensor and suitable phantoms for the application in mixed photon and neutron fields. The chosen approach relies heavily on numerical modelling and experimental verification of the detector design, taking into account the back-scatter effects represented by the specific phantoms involved. Based on commercially available silicon pin diodes, new detectors are being develooped, simulated and experimentallly verified as a joint effort amongst the project partners. The partnership constellation consists of two poject partners and a Hungarian subcontractor fully integrated in the line of work. Neuron modelling: For neutron detection the converter of radiator technology was adopted

  7. Contracts for field projects and supporting research on enhanced oil recovery. Progress review number 86, quarter ending March 31, 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-05-01

    Summaries are presented for 37 enhanced oil recovery contracts being supported by the Department of Energy. The projects are grouped into gas displacement methods, thermal recovery methods, geoscience technology, reservoir characterization, and field demonstrations in high-priority reservoir classes. Each summary includes the objectives of the project and a summary of the technical progress, as well as information on contract dates, size of award, principal investigator, and company or facility doing the research.

  8. RCRA [Resource Conservation and Recovery Act] ground-water monitoring projects for Hanford facilities: Annual progress report for 1988

    International Nuclear Information System (INIS)

    Fruland, R.M.; Lundgren, R.E.

    1989-04-01

    This report describes the progress during 1988 of 14 Hanford Site ground-water monitoring projects covering 16 hazardous waste facilities and 1 nonhazardous waste facility (the Solid Waste Landfill). Each of the projects is being conducted according to federal regulations based on the Resource Conservation and Recovery Act (RCRA) of 1976 and the State of Washington Administrative Code. 21 refs., 23 figs., 8 tabs

  9. Studies on the behavior of graphite structures irradiated in the Dragon Reactor. Dragon Project report

    Energy Technology Data Exchange (ETDEWEB)

    Everett, M. R.; Graham, L. W.; Ridealgh, F.

    1971-11-15

    Design data for the physical and mechanical property changes which occur in graphite structural and fuel body components irradiated in an HTR are largely obtained from small specimens tested in the laboratory and in materials test reactors. A brief data summary is given. This graphite physics data can be used to predict dimensional changes, internal stress generation and strength changes in the graphite materials of HTR fuel elements irradiated in the Dragon Reactor. In this paper, the results which have been obtained from post-irradiation examination of a number of fuel pins, are compared with prediction.

  10. Geothermal direct-heat utilization assistance. Quarterly project progress report, October--December 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-01-01

    This report summarizes geothermal technical assistance, R and D and technology transfer activities of the Geo-Heat Center at Oregon Institute of Technology for the first quarter of FY-98 (October--December 1997). It describes 216 contacts with parties during this period related to technical assistance with geothermal direct heat projects. Areas dealt with include requests for general information including maps and material for high school debates, and material on geothermal heat pumps, resource and well data, space heating and cooling, greenhouses, aquaculture, equipment, district heating, resorts and spas, industrial applications, electric power and snow melting. Research activities include work on model construction specifications of lineshaft submersible pumps and plate heat exchangers, a comprehensive aquaculture developer package and revisions to the Geothermal Direct Use Engineering and Design Guidebook. Outreach activities include the publication of the Quarterly Bulletin (Vol. 18, No. 4) which was devoted entirely to geothermal activities in South Dakota, dissemination of information mainly through mailings of publications, tours of local geothermal uses, geothermal library acquisition and use, participation in workshops, short courses and technical meetings by the staff, and progress monitor reports on geothermal activities.

  11. Federal assistance program. Quarterly project progress report, January 1998--March 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-04-01

    This report summarizes geothermal technical assistance, R&D and technology transfer activities of the Geo-Heat Center at Oregon Institute of Technology for the second quarter of FY-98-98 (January-March, 1998). It describes 268 contacts with parties during this period related to technical assistance with geothermal direct heat projects. Areas dealt with include requests for general information including maps and material for high school debates, and material on geothermal heat pumps, resource and well data, spacing heating and cooling, greenhouses, aquaculture, equipment, district heating, resorts and spas, industrial applications, electric power and snow melting. Research activities include work on model construction specifications for line shaft submersible pumps and plate heat exchangers and a comprehensive aquaculture developer package. The revised Geothermal Direct Use Engineering and Design Guidebooks was completed, published and is available for distribution. Outreach activities include the publication of the Quarterly Bulletin (Vol. 19, No. 1) which was devoted entirely to geothermal equipment, dissemination of information mainly through mailings of publications, tours of local geothermal uses, geothermal library acquisitions and use, participation in workshops, short courses and technical meetings by the staff, and progress monitor reports on geothermal activities.

  12. 94-1 Research and Development Project lead laboratory support: Fiscal year 1997. Progress report

    International Nuclear Information System (INIS)

    McKee, S.D.

    1996-12-01

    On May 26, 1994, the Defense Nuclear Facilities Safety Board (DNFSB) issued Recommendation 94-1, which expressed the board's concern about nuclear materials left in the manufacturing pipeline after the US halted its nuclear weapons production activities. The DNFSB emphasized the need for remediation of these materials. As part of Recommendation 94-1, the DNFSB defined research objectives as follows: that a research program be established to fill any gaps in the information base needed for choosing among the alternate processes to be used in safe conversion of various types of fissile materials to optimal forms for safe interim storage and the longer-term disposition. To achieve this objective a research and technology development program with two elements is needed: a technology-specific program that is focused on treating and storing materials safety, with concomitant development of storage criteria and surveillance requirements, centered around 3- and 8-year targets; and a core technology program to augment the knowledge base about general chemical and physical processing and storage behavior and to assure safe interim material storage until disposition policies are formulated. The paper reports the progress on the following: materials identification and surveillance; stabilization process development; surveillance and monitoring; core technologies; and project management

  13. Progress on the HUPO Draft Human Proteome: 2017 Metrics of the Human Proteome Project.

    Science.gov (United States)

    Omenn, Gilbert S; Lane, Lydie; Lundberg, Emma K; Overall, Christopher M; Deutsch, Eric W

    2017-12-01

    The Human Proteome Organization (HUPO) Human Proteome Project (HPP) continues to make progress on its two overall goals: (1) completing the protein parts list, with an annual update of the HUPO draft human proteome, and (2) making proteomics an integrated complement to genomics and transcriptomics throughout biomedical and life sciences research. neXtProt version 2017-01-23 has 17 008 confident protein identifications (Protein Existence [PE] level 1) that are compliant with the HPP Guidelines v2.1 ( https://hupo.org/Guidelines ), up from 13 664 in 2012-12 and 16 518 in 2016-04. Remaining to be found by mass spectrometry and other methods are 2579 "missing proteins" (PE2+3+4), down from 2949 in 2016. PeptideAtlas 2017-01 has 15 173 canonical proteins, accounting for nearly all of the 15 290 PE1 proteins based on MS data. These resources have extensive data on PTMs, single amino acid variants, and splice isoforms. The Human Protein Atlas v16 has 10 492 highly curated protein entries with tissue and subcellular spatial localization of proteins and transcript expression. Organ-specific popular protein lists have been generated for broad use in quantitative targeted proteomics using SRM-MS or DIA-SWATH-MS studies of biology and disease.

  14. Investigation of irradiation strengthening of b.c.c. metals and their alloys. Progress report, January 1976--October 1976

    International Nuclear Information System (INIS)

    1976-01-01

    Research on irradiation of bcc metals and alloys is reported. Data and information are presented in appendixes on low temperature neutron irradiation of Nb, effects of tritium on the yield stress of Nb, multiple dislocation motion, dislocation group motion, dislocation kinetics, and computer simulation of dislocation motion

  15. St. Louis Area Earthquake Hazards Mapping Project - A Progress Report-November 2008

    Science.gov (United States)

    Karadeniz, D.; Rogers, J.D.; Williams, R.A.; Cramer, C.H.; Bauer, R.A.; Hoffman, D.; Chung, J.; Hempen, G.L.; Steckel, P.H.; Boyd, O.L.; Watkins, C.M.; McCallister, N.S.; Schweig, E.

    2009-01-01

    St. Louis has experienced minor earthquake damage at least 12 times in the past 200 years. Because of this history and its proximity to known active earthquake zones, the St. Louis Area Earthquake Hazards Mapping Project (SLAEHMP) is producing digital maps that show variability of earthquake hazards, including liquefaction and ground shaking, in the St. Louis area. The maps will be available free via the internet. Although not site specific enough to indicate the hazard at a house-by-house resolution, they can be customized by the user to show specific areas of interest, such as neighborhoods or transportation routes. Earthquakes currently cannot be predicted, but scientists can estimate how strongly the ground is likely to shake as the result of an earthquake. Earthquake hazard maps provide one way of conveying such estimates. The U.S. Geological Survey (USGS), which produces earthquake hazard maps for the Nation, is working with local partners to develop detailed maps for urban areas vulnerable to strong ground shaking. These partners, which along with the USGS comprise the SLAEHMP, include the Missouri University of Science and Technology-Rolla (Missouri S&T), Missouri Department of Natural Resources (MDNR), Illinois State Geological Survey (ISGS), Saint Louis University, Missouri State Emergency Management Agency, and URS Corporation. Preliminary hazard maps covering a test portion of the 29-quadrangle St. Louis study area have been produced and are currently being evaluated by the SLAEHMP. A USGS Fact Sheet summarizing this project was produced and almost 1000 copies have been distributed at several public outreach meetings and field trips that have featured the SLAEHMP (Williams and others, 2007). In addition, a USGS website focusing on the SLAEHMP, which provides links to project results and relevant earthquake hazard information, can be found at: http://earthquake.usgs.gov/regional/ceus/urban_map/st_louis/index.php. This progress report summarizes the

  16. Food irradiation process control and acceptance. Regional UNDP project for Asia and the Pacific, mission undertaken in Vietnam. Food irradiation programme planning facility operation and pilot scale studies RPFI-Phase 3

    International Nuclear Information System (INIS)

    Giddings, G.G.

    1992-01-01

    At the request of the Government of Vietnam, the FAO/IAEA expert undertook a one-week mission to Vietnam between 16 and 23 March 1991, to the Hanoi Irradiation Center of the Vietnam Atomic Energy Commission. This mission included the following: The expert inspected the new Soviet automated, dry storage pilot plant gamma irradiator in the final stages of construction on the outskirts of Hanoi, and met with senior staff of the Hanoi Irradiation Center plus the Center specialized groups to hear and take note of their progress, problems and materials and manpower training expectations, etc. A tour of a large rice and vegetable growing cooperative outside Hanoi was made, followed by a meeting with members of the Cooperative's governing body. This cooperative will participate in pilot scale food irradiation feasibility studies once the new irradiator is operational. The expert provided a technical seminar to the Hanoi Irradiation Center staff, plus a general seminar to members of the Consumers Union of Vietnam plus invited guests, on radiation processing in general and food irradiation in particular, during the week. The expert accompanied Irradiation Center staff to Haiphong to visit the National Institute for Marine Products Research plus two Government-run fishery products processing plants in connection with the marine products side of the national food irradiation programme. He was accompanied to a meeting at the Ministry of Agriculture and Food Industry to meet with the Vice-Minister and staff plus food and allied industry representatives. (author)

  17. Aspergillus oryzae in solid-state and submerged fermentations: Progress report on a multi-disciplinary project

    NARCIS (Netherlands)

    Biesebeke, R. te; Ruijter, G.; Rahardjo, Y.S.P.; Hoogschagen, M.J.; Heerikhuisen, M.; Levin, A.; Driel, K.G.A. van; Schutyser, M.A.I.; Dijksterhuis, J.; Zhu, Y.; Weber, F.J.; Vos, W.M. de; Hondel, K.A.M.J.J. van den; Rinzema, A.; Punt, P.J.

    2002-01-01

    We report the progress of a multi-disciplinary research project on solid-state fermentation (SSF) of the filamentous fungus Aspergillus oryzae. The molecular and physiological aspects of the fungus in submerged fermentation (SmF) and SSF are compared and we observe a number of differences correlated

  18. Aspergillus oryzae in solid-state and submerged fermentations. Progress report on a multi-disciplinary project

    NARCIS (Netherlands)

    te Biesebeke, Rob; Ruijter, George; Rahardjo, Yovita S P; Hoogschagen, Marisca J; Heerikhuisen, Margreet; Levin, Ana; van Driel, Kenneth G A; Schutyser, Maarten A I; Dijksterhuis, Jan; Zhu, Yang; Weber, Frans J; de Vos, Willem M; van den Hondel, Kees A M J J; Rinzema, Arjen; Punt, Peter J

    We report the progress of a multi-disciplinary research project on solid-state fermentation (SSF) of the filamentous fungus Aspergillus oryzae. The molecular and physiological aspects of the fungus in submerged fermentation (SmF) and SSF are compared and we observe a number of differences correlated

  19. Aspergillus oryzae in solid-state and submerged fermentations. Progress report on a multi-disciplinary project

    NARCIS (Netherlands)

    Biesebeke, te R.; Ruijter, G.; Rahardjo, Y.S.P.; Hoogschagen, M.J.; Heerikhuisen, M.; Levin, A.; Driel, van K.G.A.; Schutyser, M.A.I.; Dijksterhuis, J.; Yang Zhu, Yang; Weber, F.J.; Vos, de W.M.; Hondel, van den K.A.; Rinzema, A.; Punt, P.J.

    2002-01-01

    We report the progress of a multi-disciplinary research project on solid-state fermentation (SSF) of the filamentous fungus Aspergillus oryzae. The molecular and physiological aspects of the fungus in submerged fermentation (SmF) and SSF are compared and we observe a number of differences correlated

  20. Fabrication, inspection, and test plan for the Advanced Test Reactor (ATR) Mixed-Oxide (MOX) fuel irradiation project

    International Nuclear Information System (INIS)

    Wachs, G.W.

    1997-11-01

    The Department of Energy (DOE) Fissile Materials Disposition Materials Disposition Program (FMDP) has announced that reactor irradiation of MOX fuel is one of the preferred alternatives for disposal of surplus weapons-usable plutonium (Pu). MOX fuel has been utilized domestically in test reactors and on an experimental basis in a number of Commercial Light Water Reactors (CLWRs). Most of this experience has been with Pu derived from spent low enriched uranium (LEU) fuel, known as reactor grade (RG) Pu. The MOX fuel test will be irradiated in the ATR to provide preliminary data to demonstrate that the unique properties of surplus weapons-derived or weapons-grade (WG) plutonium (Pu) do not compromise the applicability of this MOX experience base. In addition, the test will contribute experience with irradiation of gallium-containing fuel to the data base required for resolution of generic CLWR fuel design issues (ORNL/MD/LTR-76). This Fabrication, Inspection, and Test Plan (FITP) is a level 2 document as defined in the FMDP LWR MOX Fuel Irradiation Test Project Plan (ORNL/MD/LTR-78)

  1. Heavy-Section Steel Irradiation Program: Progress report for April--September 1995. Volume 6, Number 2

    International Nuclear Information System (INIS)

    Corwin, W.R.

    1996-08-01

    The goal of the Heavy-Section Steel Irradiation Program is to provide a thorough, quantitative assessment of effects of neutron irradiation on material behavior, and in particular the fracture toughness properties, of typical pressure vessel steels as they relate to light-water reactor pressure-vessel integrity. Effects of specimen size, material chemistry, product form and microstructure, irradiation fluence, flux, temperature and spectrum, and post-irradiation annealing are being examined on a wide range of fracture properties. The HSSI Program is arranged into 14 tasks: (1) program management, (2) fracture toughness (K Ic ) curve shift in high-copper welds, (3) crack-arrest toughness (K Ia ) curve shift in high-copper welds, (4) irradiation effects on cladding, (5) K Ic and K Ia curve shifts in low upper-shelf welds, (6) annealing effects in low upper-shelf welds, (7) irradiation effects in a commercial low upper-shelf weld, (8) microstructural analysis of irradiation effects, (9) in-service aged material evaluations, (10) correlation monitor materials, (11) special technical assistance, (12) JPDR steel examination, (13) technical assistance for JCCCNRS Working Groups 3 and 12, and (14) additional requirements for materials. This report provides an overview of the activities within each of these task from April through September 1995

  2. Research projects into the safety of nuclear power plants. Period cover 01. January - 30. June 2017. Progress report

    International Nuclear Information System (INIS)

    2017-01-01

    Within its competence for energy research the Federal Ministry for Economic Affairs and Energy (BMWi) sponsors research projects on the safety of nuclear power plants currently in operation. The objective of these projects is to provide fundamental knowledge, procedures and methods to contribute to realistic safety assessments of nuclear installations, to the further development of safety technology and to make use of the potential of innovative safety-related approaches. The Gesellschaft fur Anlagen- und Reaktorsicherheit (GRS) gGmbH, by order of the BMWi, continuously issues information on the status of such research projects by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work. The progress reports are published by the Project Management Agency/ Authority Support Division of GRS. The reports as of the year 2000 are available in the internet-based information system on results and data of reactor safety research (https://www.grs-fbw.de). The compilation of the reports is classified according to the topic areas of reactor safety research. The reports are arranged in sequence of their project numbers. Ilt has to be pointed out that the authors of the reports are responsible for the contents of this compilation. The BMWi does not take any responsibility for the correctness, exactness and completeness of the information nor for the observance of private claims of third parties.

  3. Project Management Plan/Progress Report UT/GTKS Training Program Development for Commercial Building Operators

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2013-03-31

    Universidad del Turabo (UT), in a collaborative effort with Global Turn Key Services, Inc. (GTKS), proposed to develop a training program and a commercialization plan for the development of Commercial Building Operators (CBOs). The CBOs will operate energy efficient buildings to help maintain existing buildings up to their optimal energy performance level, and ensure that net-zero-energy buildings continuously operate at design specifications, thus helping achieve progress towards meeting BTP Strategic Goals of creating technologies and design approaches that enable net-zero-energy buildings at low incremental costs by 2025. The proposed objectives were then: (1) Develop a Commercial Building Operator (CBO) training program and accreditation that will in turn provide a certification to participants recognized by Accreditation Boards such as the North American Board of Certified Energy Practitioners (NABCEP) and Leadership in Energy & Environmental Designs (LEED). (2) Develop and implement a commercialization and sustainability plan that details marketing, deployment, financial characterization, job placement, and other goals required for long-term sustainability of the project after the funding period. (3) After program development and deployment, provide potential candidates with the knowledge and skill sets to obtain employment in the commercial building green energy (net-zero-energy building) job market. The developed CBO training program will focus on providing skills for participants, such as displaced and unemployed workers, to enter the commercial building green energy (net-zeroenergy building) job market. This course was designed to allow a participant with minimal to no experience in commercial building green technology to obtain the required skill sets to enter the job market in as little as 12 weeks of intensive multi-faceted learning. After completion of the course, the CBO staff concluded the participant will meet minimum established accreditation

  4. A nationwide quality improvement project to accelerate Ghana's progress toward Millennium Development Goal Four: design and implementation progress.

    Science.gov (United States)

    Twum-Danso, Nana A Y; Akanlu, George B; Osafo, Enoch; Sodzi-Tettey, Sodzi; Boadu, Richard O; Atinbire, Solomon; Adondiwo, Ane; Amenga-Etego, Isaac; Ashagbley, Francis; Boadu, Eric A; Dasoberi, Ireneous; Kanyoke, Ernest; Yabang, Elma; Essegbey, Ivan T; Adjei, George A; Buckle, Gilbert B; Awoonor-Williams, J Koku; Nang-Beifubah, Alexis; Twumasi, Akwasi; McCannon, C Joseph; Barker, Pierre M

    2012-12-01

    The gap between evidence-based guidelines and practice of care is reflected, in low- and middle-income countries, by high rates of maternal and child mortality and limited effectiveness of large-scale programing to decrease those rates. We designed a phased, rapid, national scale-up quality improvement (QI) intervention to accelerate the achievement of Millennium Development Goal Four in Ghana. Our intervention promoted systems thinking, active participation of managers and frontline providers, generation and testing of local change ideas using iterative learning from transparent district and local data, local ownership and sustainability. After 50 months of implementation, we have completed two prototype learning phases and have begun regional spread phases to all health facilities in all 38 districts of the three northernmost regions and all 29 Catholic hospitals in the remaining regions of the country. To accelerate the spread of improvement, we developed 'change packages' of rigorously tested process changes along the continuum of care from pregnancy to age 5 in both inpatient and outpatient settings. The primary successes for the project so far include broad and deep adoption of QI by local stakeholders for improving system performance, widespread capacitation of leaders, managers and frontline providers in QI methods, incorporation of local ideas into change packages and successful scale-up to approximately 25% of the country's districts in 3 years. Implementation challenges include variable leadership uptake and commitment at the district level, delays due to recruiting and scheduling barriers, weak data systems and repeated QI training due to high staff turnover.

  5. The Agricultural Model Intercomparison and Improvement Project (AgMIP): Progress and Preliminary Results

    Science.gov (United States)

    Rosenzweig, C.

    2011-12-01

    The Agricultural Model Intercomparison and Improvement Project (AgMIP) is a distributed climate-scenario simulation exercise for historical model intercomparison and future climate change conditions with participation of multiple crop and agricultural trade modeling groups around the world. The goals of AgMIP are to improve substantially the characterization of risk of hunger and world food security due to climate change and to enhance adaptation capacity in both developing and developed countries. Recent progress and the current status of AgMIP will be presented, highlighting three areas of activity: preliminary results from crop pilot studies, outcomes from regional workshops, and emerging scientific challenges. AgMIP crop modeling efforts are being led by pilot studies, which have been established for wheat, maize, rice, and sugarcane. These crop-specific initiatives have proven instrumental in testing and contributing to AgMIP protocols, as well as creating preliminary results for aggregation and input to agricultural trade models. Regional workshops are being held to encourage collaborations and set research activities in motion for key agricultural areas. The first of these workshops was hosted by Embrapa and UNICAMP and held in Campinas, Brazil. Outcomes from this meeting have informed crop modeling research activities within South America, AgMIP protocols, and future regional workshops. Several scientific challenges have emerged and are currently being addressed by AgMIP researchers. Areas of particular interest include geospatial weather generation, ensemble methods for climate scenarios and crop models, spatial aggregation of field-scale yields to regional and global production, and characterization of future changes in climate variability.

  6. Greenhouse gas emission trends and projections in Europe 2011. Tracking progress towards Kyoto and 2020 targets

    Energy Technology Data Exchange (ETDEWEB)

    Busche, J.; Scheffler, M.; Graichen, V. (Umweltbundesamt, Vienna (Austria)) (and others)

    2011-10-15

    At the end of 2010, the EU-15 was on track to achieve its Kyoto target but three EU-15 Member States (Austria, Italy and Luxembourg) were not on track to meet their burden-sharing targets. These countries must therefore seriously consider further action to ensure compliance, in particular revising their plans on using flexible mechanisms. Among the EEA member countries outside the EU, Liechtenstein and Switzerland were not on track to achieve their Kyoto target at the end of 2009. All other European countries are on track to meet their targets, either based on domestic emissions only or with the assistance of Kyoto mechanisms. The economic recession had a significant impact on the EU's total greenhouse gas (GHG) emission trends but a more limited effect on progress towards Kyoto targets. This is because emissions in the sectors covered by the EU Emissions Trading Scheme (ETS), which were most affected by the crisis, do not affect Kyoto compliance once ETS caps have been set. With existing national measures, Member States do not project enough emission reductions for the EU to meet its unilateral 20 % reduction commitment in 2020. Additional measures currently planned by Member States will help further reduce emissions but will be insufficient to achieve the important emission cuts needed in the longer term. By 2020 Member States must enhance their efforts to reduce emissions in non-EU ETS sectors, such as the residential, transport or agriculture sectors, where legally binding national targets have been set under the EU's 2009 climate and energy package. (Author)

  7. Thorium utilization program progress report for January 1, 1974--June 30, 1975. [Reprocessing; refabrication; recycle fuel irradiations

    Energy Technology Data Exchange (ETDEWEB)

    Lotts, A.L.; Kasten, P.R.

    1976-05-01

    Work was carried out on the following: HTGR reprocessing development and pilot plant, refabrication development and pilot plant, recycle fuel irradiations, engineering and economic studies, and conceptual design of a commercial recycle plant. (DLC)

  8. A change in strategy for a CERCLA Removal Action Demolition Project in progress results in overall project enhancements

    International Nuclear Information System (INIS)

    Albertin, M.; Nichols, R.M.; Edwards, D.T.

    1995-01-01

    This paper discusses changes made in a demolition project at the Fernald Environmental Management Project (FEMP), a site on the National Priorities list (NPL), owned by the Department of Energy. The project, to demolish fourteen uranium ore silos and their structure, was based on a Removal Action Work Plan, submitted and approved by the United States Environmental Protection Agency (USEPA), that integrated Comprehensive Environmental Response Compensation and Liability Act (CERCLA) requirements to remove the source of contamination and threat to public health and the environment. After the demolition contractor defaulted at 30% complete, completion of the project by the USEPA deadline was threatened. The recovery plan included re-evaluation of project documents in addition to the schedule. It was determined that re-interpretation of the removal action criteria, including design and Removal Action Work Plan, would eliminate road-blocks, and optimize resources, resulting in project completion by the original deadline even after lost-time in mobilizing another contractor. This presentation will discuss the open-quotes lessons learnedclose quotes by the project team and illustrate how simplification of construction methods resulted in enhancements to the environmental controls, improved material handing, and created a safer work environment

  9. Heavy-Section Steel Irradiation Program. Volume 2, No. 2: Semiannual progress report, April--September 1991

    International Nuclear Information System (INIS)

    Corwin, W.R.

    1994-10-01

    Goal is to provide a thorough, quantitative assessment of the effects of neutron irradiation on the material behavior, and in particular the fracture toughness properties, of typical pressure vessel stools as they relate to light-water reactor pressure-vessel integrity. Effects of specimen size, material chemistry, product form and microstructure, irradiation fluence, flux, temperature and spectrum, and post-irradiation annealing are being examined on a wide range of fracture properties. The HSSI Program is into 10 tasks: (1) program management, (2) K Ic curve shift in high-copper welds, (3) K Ia curve shift in high-copper welds, (4) irradiation effects on cladding, (5) K Ic and K Ia curve shifts in low upper-shelf welds, (6) irradiation effects in a commercial low upper-sheer weld, (7) microstructural analysis of irradiation effects, (8) in-service aged material evaluations, (9) correlation monitor materials, and (10) special technical assistance. This report provides an overview of the activities within each of these tasks from April to September 1991

  10. Irradiated Fuel Management Advisory Programme (IFMAP). An interregional technical co-operation project

    International Nuclear Information System (INIS)

    1993-04-01

    Delays in the implementation of the fuel reprocessing option in some countries, the complete abandonment of this option in other countries, and delays in the availability of final spent fuel disposal in almost all countries, has led to increasingly long periods of 'interim' spent fuel storage. The problem of the management of irradiated fuels has therefore increased in importance for many Member States. For power reactors or research reactors, irradiated fuel management includes all of the procedures involving irradiated fuel from the time that it is discharged from the reactor core until it is either reprocessed or placed in a permanent disposal site. Although the IAEA has had programmes in this area in the past and has ongoing activities at present, there is a clear need to provide support to individual Member States which require advice and/or assistance in the resolution of particular questions and concerns

  11. Progress report projects in the field of nuclear safety sponsered by the Federal Minister for Research and Technology

    International Nuclear Information System (INIS)

    1980-03-01

    Investigations on the safety of Light Water Reactors (LWR) being performed in the framework of the Research Program Reactor Safety (RS-Projects) are sponsored by the BMFT (Federal Minister for Research and Technology), Bundesminister fuer Forschung und Technologie. Objective of this program is to investigate in greater detail the safety margins of nuclear energy plants and their systems and the further development of safety technology. Besides the investigations of LWR tasks first projects on the safety of FBR type reactors are sponsored by the BMFT. The GRS (Reactor Safety Association), Gesellschaft fuer Reaktorsicherheit mbH, by order of the BMFT, informs continuously of the status of such investigations by means of quarterly and annually publication of progress reports within the series GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about objectives, the work performed, the results, the next steps of the work etc. The individual reports are prepared in a standard form by the contractors themselves as a documentation of their progress in work at the GRS, within the framework of general information of the progress in reactor safety research. The individual reports are arranged according to the amended LWR Safety Research Program of the BMFT. Another table contents uses the same classification system as applied in the Nuclear Safety Index of the CEC and the OECD. (orig./HP) [de

  12. Progress report of the CEC project Rodos system development. Period: 1 september 92-31 august 93

    International Nuclear Information System (INIS)

    Marchand, O.

    1994-01-01

    Within the context of the Radioprotection program of the CEC, the RODOS project (Real-time On-line DecisiOn Support system) aims at the development of a decision support system for nuclear emergencies. RODOS involves 22 research teams, divided in 4 sub-projects: 'Meteorology and Atmospheric Dispersion, 'System Development', 'Decision Aiding Techniques'. The fourth sub-project is a Joint Study Project of the Agreement between CEC ad the CIS republics. EDF is working in the 'System Development' sub-project and namely in the 'training' group. This group aims at the creation of a specific training course for health physics managers, based on RODOS. This note reproduces the progress report of the 'Development System' project. The reporting period is: September 92 - August 93. Progress bas been made within the reporting period in the: - development of data assimilation methods incorporating both monitoring data and model predictions for obtaining consistent pictures of the environmental contamination and the source term ; - improvement and extension of the modules ATSTEP-CORA (atmospheric dispersion and deposition), EMERSIM (simulation of emergency actions), ECOAMOR (exposure pathways and dose calculation) and FRODO (simulation of relocation and agricultural countermeasures) ; - preparation of training courses using RODOS as illustrative tool ; - extension of the functions of the RODOS operating system OSY, in particular of RoGIS, its geographical information system. (author). 2 figs

  13. Proton irradiation impacts age-driven modulations of cancer progression influenced by immune system transcriptome modifications from splenic tissue

    International Nuclear Information System (INIS)

    Wage, Justin; Ma, Lili; Peluso, Michael; Lamont, Clare; Hahnfeldt, Philip; Hlatky, Lynn; Beheshti, Afshin; Evens, Andrew M.

    2015-01-01

    Age plays a crucial role in the interplay between tumor and host, with additional impact due to irradiation. Proton irradiation of tumors induces biological modulations including inhibition of angiogenic and immune factors critical to 'hallmark' processes impacting tumor development. Proton irradiation has also provided promising results for proton therapy in cancer due to targeting advantages. Additionally, protons may contribute to the carcinogenesis risk from space travel (due to the high proportion of high-energy protons in space radiation). Through a systems biology approach, we investigated how host tissue (i.e. splenic tissue) of tumor-bearing mice was altered with age, with or without whole-body proton exposure. Transcriptome analysis was performed on splenic tissue from adolescent (68-day) versus old (736-day) C57BL/6 male mice injected with Lewis lung carcinoma cells with or without three fractionations of 0.5 Gy (1-GeV) proton irradiation. Global transcriptome analysis indicated that proton irradiation of adolescent hosts caused significant signaling changes within splenic tissues that support carcinogenesis within the mice, as compared with older subjects. Increases in cell cycling and immunosuppression in irradiated adolescent hosts with CDK2, MCM7, CD74 and RUVBL2 indicated these were the key genes involved in the regulatory changes in the host environment response (i.e. the spleen). Collectively, these results suggest that a significant biological component of proton irradiation is modulated by host age through promotion of carcinogenesis in adolescence and resistance to immunosuppression, carcinogenesis and genetic perturbation associated with advancing age. (author)

  14. Heavy-section steel irradiation program. Volume 4, No. 2. Semiannual progress report, April 1993--September 1993

    International Nuclear Information System (INIS)

    Corwin, W.R.

    1995-03-01

    Maintaining the integrity of the reactor pressure vessel (RPV) in a light-water-cooled nuclear power plant is crucial in preventing and controlling severe accidents which have the potential for major contamination release. The RPV is the only key safety-related component of the plant for which a duplicate or redundant backup system does not exist. In particular, it is vital to fully understand the degree of irradiation-induced degradation of the RPV's fracture resistance which occurs during service, since without that radiation damage, it is virtually impossible to postulate a realistic scenario that would result in RPV failure. For this reason, the Heavy-Section Steel Irradiation (HSSI) Program has been established to provide a quantitative assessment of the effects of neutron irradiation on the material behavior and, in particular, the fracture toughness properties of typical pressure-vessel steels. Effects of specimen size; material chemistry; product form and microstructure; irradiation fluence, flux, temperature, and spectrum; and postirradiation annealing are being examined on a wide range of fracture properties. The HSSI Program is arranged into 14 tasks: (1) program management, (2) fracture toughness (K lc ) curve shift in high-copper welds, (3) crack-arrest toughness (K la ) curve shift in high-copper welds, (4) irradiation effects on cladding, (5) K lc and K la curve shifts in low upper-shelf (LUS) welds, (6) annealing effects in LUS welds, (7) irradiation effects in a commercial LUS weld, (8) microstructural analysis of irradiation effects, (9) in-service aged material evaluations, (10) correlation monitor materials, (11) special technical assistance, (12) Japan Power Development Reactor steel examination, (13) technical assistance for Joint Coordinating Committee on Civilian Nuclear Reactor Safety (JCCCNRS) Working Groups 3 and 12, and (14) additional requirements for materials

  15. BWRVIP-140NP: BWR Vessel and Internals Project Fracture Toughness and Crack Growth Program on Irradiated Austenitic Stainless Steel

    International Nuclear Information System (INIS)

    Gilman, J.

    2005-01-01

    To prepare for this project, EPRI and BWRVIP conducted a workshop at Ponte Vedra Beach, Florida during February 19-21, 2003 (EPRI report 1007822). Attendees were invited to exchange relevant information on the effects of irradiation on austenitic materials in light water reactors and to produce recommendations for further work. EPRI reviewed the data, recommendations, and conclusions derived from the workshop and developed prioritized test matrices defining new data needs. Proposals were solicited, and selected proposals are the basis for the program described in this report. Results The planned test matrix for fracture toughness testing includes 21 tests on 5 materials

  16. Food irradiation process control and acceptance. Regional UNDP project for Asia and the Pacific, mission undertaken in Thailand. Food irradiation programme planning facility operations and pilot scale studies RPFI-Phase 3

    International Nuclear Information System (INIS)

    Giddings, G.G.

    1992-01-01

    During the week of 21 through 25 May 1991, a mission was completed at the Thailand Office of Atomic Energy for Peace's ''Thai Irradiation Centre''. Meetings and discussions were held with Center staff on all aspects of commercial/industrial multipurpose (food and non-food) processing, handling and marketing. Separate meetings and discussions were held regarding the overall food irradiation programme including FAO/IAEA supported projects. (author)

  17. Projection of the annealing behavior of irradiated Si sensors in the LHC environment

    CERN Document Server

    Chatterji, S; Bhardwaj, N; Chauhan, S S; Choudhary, B C; Gupta, P; Jha, M; Kumar, A; Naimuddin, M; Ranjan, K; Shivpuri, R K; Srivastava-Ajay, K

    2004-01-01

    The study of the radiation tolerance and subsequent annealing effects on p+-n-n+ silicon micro strip detectors has been performed as a part of R&D program for the preshower detector in the CMS experiment. CMS silicon strip sensors were irradiated with 24 GeV protons at CERN proton synchrotron (PS) to a total fluence of 3*10/sup 14/ p/cm/sup 2 /. Sensors were stored in freezer after irradiation and I-V and C-V measurements were carried out. Variation in full depletion voltage and leakage current have been studied as a function of annealing time. The breakdown performance of the device actually improves after irradiation due to the beneficial effect of type-inversion. The breakdown voltage increases further with annealing time. However, the leakage current increases tremendously just after irradiation. As the sensors are annealed, there is a drop in leakage current. The rate of annealing is observed to be temperature dependent. Hence in terms of leakage current, it seems that room temperature annealing is b...

  18. Leaching Behavior of Coal Combustion Products and the Environmental Implication in Road Construction : Project Progress Report

    Science.gov (United States)

    2009-01-26

    This is the third annual report for Project #043352. Project #043352 is designed to establish the leaching characteristics for several different types of ash using a relatively rigorous leaching procedure developed by Kosson et al (2002) for a wide r...

  19. Projects at the Western Environmental Technology Office. Quarterly technical progress report, April 1--June 30, 1995

    International Nuclear Information System (INIS)

    1995-01-01

    This report contains brief outlines of the multiple projects under the responsibility of the Western Environmental Technology Office in Butte Montana. These projects include biomass remediation, remediation of contaminated soils, mine waste technology, and several other types of remediation

  20. Transportation Infrastructure: Progress on and Challenges to Central Artery/Tunnel Project's Cost and Financing

    Science.gov (United States)

    1997-07-01

    The Central Artery/Tunnel project in Boston, Massachusetts--one of the largest, most complex, and most expensive highway construction projects ever undertaken--is well under way, with contracts worth nearly $8 billion either completed or awarded. Con...

  1. Effects of x-irradiation on steroid biotransformations by testicular tissue. Progress report, August 1, 1974--July 31, 1975

    International Nuclear Information System (INIS)

    Ellis, L.C.

    1975-01-01

    X irradiation of rat testicular tissue either in vivo or in vitro labilized the lysosomal membranes with a release of both acid phosphatase and phospholipase A 2 resulting in an increased lipid peroxidation. The results from these investigations suggest that the lipid endoperoxides and malonaldehyde are responsible for mediating the effects of radiation on steroid biotransformations. Estradiol, testosterone, 5α-dihydrotestosterone, prolactin, acetylcholine, cGMP, H 2 O 2 , PUFA, ethanol and vitamin A increased lysosomal fragility and initiated enzyme release while ATP, cAMP, vitamin E, theophylline, indomethacin, caffeine, cortisol, epinephrine, NADPH, NDGA, FSH and Zn ++ decreased both phenomena. An increase in catalase activity was consistently observed after irradiation and by cAMP indicative of an increase in testicular cAMP content following irradiation. Seminiferous tubules were found to be dependent on prostaglandins for their contractions. (U.S.)

  2. Progress and results of the project ENETRAP II: European network of education and training in radiation protection

    International Nuclear Information System (INIS)

    Marco, M.; Llorente Herranz, C.; Coeck, M.; Livosi, P.; Massiot, P.; Moebius, S.

    2013-01-01

    The CIEMAT has participated in a number of working groups and has led the WP 6 for the creation of a database of events of specific training the RPE and the RPO taking into account aspects developed in schemes of defined training. The database includes providers and job training opportunities. Is a tool that will serve as a mechanism for comparison with established standards of training in the project.The project has made great progress in the implementation of the new directive at European level. (Author)

  3. Effect of dihydroartemisinin on the cell cycle progress of irradiated human cervical cancer cell line and its mechanism

    International Nuclear Information System (INIS)

    Chen Xialin; Ji Rong; Cao Jianping; Zhu Wei; Fan Sanjun; Wang Jianfang; Cao Jianping

    2010-01-01

    Objective: To observe the changes of cell cycle on cancer cells after dihydroartemisinin and X-ray irradiation. Methods: Human HeLa cells of cervical cancer with p53 mutation was used and human SiHa cells of cervical cancer with wild p53 was used as control. Flow cytometry was used to detect the effect of dihydroartemisinin (20 and 100 μmol/L) and irradiation (6 Gy)on cell cycle. Western blot was used to measure the levels of cell cycle protein. Results: G 2 arrest was observed in irradiated HeLa cells, which the proportion of cells in G 2 phase was increased from 14.45% to 73.58% after 6 Gy X-ray irradiation, but it was abrogated by dihydroartemisinin from 73. 58% to 48.31% in HeLa cells, and it had no change on the SiHa cells. The elevated Wee1 protein and the lowered Cyclin B1 protein were observed with the G 2 arrest severity. The expression of radiation-induced Wee1 protein was suppressed and the Cyclin B1 protein was increased after dihydroartemisinin treatment, which was in accordance with the abrogation of radiation-induced G 2 delay. Conclusions: The main effect of irradiation on cell cycle of p53 mutated HeLa cells is G 2 arrest. Dihydroartemisinin could abrogate it, which is associated with the changes of Wee1 protein and Cyclin B1 protein. In Siha cells, the main effect of irradiation on cell cycle is G 1 arrest, and dihydroartemisinin has no effect on it. (authors)

  4. Heavy-Section Steel Irradiation Program. Volume 2, No. 1: Semiannual progress report, October 1990--March 1991

    International Nuclear Information System (INIS)

    Corwin, W.R.

    1994-07-01

    Maintaining the integrity of the reactor pressure vessel (RPV) in a light-water-cooled nuclear power plant is crucial in preventing and controlling severe accidents that have the potential for major contamination release. The RPV is the only key safety-related component of the plant for which a duplicate or redundant backup system does not exist. It is therefore imperative to understand and be able to predict the capabilities and limitations of the integrity inherent in the RPV. For this reason, the Heavy-Section Steel Irradiation (HSSI) Program has been established with its primary goal to provide a thorough, quantitative assessment of the effects of neutron irradiation on the material behavior, and in particular the fracture toughness properties, of typical pressure-vessel steels as they relate to light-water reactor pressure-vessel integrity. The HSSI Program is arranged into nine tasks: (1) program management, (2) K ic curve shift in high-copper welds, (3) K ia curve shift in high-copper welds, (4) irradiation effects on cladding, (5) K ic and K ia curve shifts in low upper-shelf (LUS) weld, (6) irradiation effects in a commercial LUS weld, (7) microstructural analysis of irradiation, (8) in-service aged material evaluations, and (9) correlation monitor materials. During this period, additional analyses on the effects of precleavage stable ductile tearing on the toughness of high-copper welds 72W and 73W demonstrated that the size effects observed in the transition region are not due to substantial differences in ductile tearing behavior. Possible modifications to irradiated duplex crack-arrest specimens were examined to increase the likelihood of their successful testing. Characterization of a second batch of 72W and 73W welds was begun and results of the Charpy V-notch testing is provided. A review of literature on the annealing response of reactor pressure vessel steels was initiated

  5. Yucca Mountain site characteriztion project bibliography. Progress Report, 1994--1995

    International Nuclear Information System (INIS)

    1996-08-01

    Following a reorganization of the Office of Civilian Radioactive Waste Management in 1990, the Yucca Mountain Project was renamed Yucca Mountain Site Characterization Project. The title of this bibliography was also changed to Yucca Mountain Site Characterization Project Bibliography. Prior to August 5, 1988, this project was called the Nevada Nuclear Waste Storage Investigations. This bibliography contains information on this ongoing project which was added to the Department of Energy's Energy Science and Technology Database from January 1, 1994, through December 31, 1995. The bibliography is categorized by principal project participating organization. Participant-sponsored subcontractor reports, papers, and articles are included in the sponsoring organization's list. Another section contains information about publications on the Energy Science and Technology database which were not sponsored by the project but have some relevance to it

  6. Research Progress in Mathematical Analysis of Map Projection by Computer Algebra

    Directory of Open Access Journals (Sweden)

    BIAN Shaofeng

    2017-10-01

    Full Text Available Map projection is an important component of modern cartography, and involves many fussy mathematical analysis processes, such as the power series expansions of elliptical functions, differential of complex and implicit functions, elliptical integral and the operation of complex numbers. The derivation of these problems by hand not only consumes much time and energy but also makes mistake easily, and sometimes can not be realized at all because of the impossible complexity. The research achievements in mathematical analysis of map projection by computer algebra are systematically reviewed in five aspects, i.e., the symbolic expressions of forward and inverse solution of ellipsoidal latitudes, the direct transformations between map projections with different distortion properties, expressions of Gauss projection by complex function, mathematical analysis of oblique Mercator projection, polar chart projection with its transformation. Main problems that need to be further solved in this research field are analyzed. It will be helpful to promote the development of map projection.

  7. Yucca Mountain site characteriztion project bibliography. Progress Report, 1994--1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-08-01

    Following a reorganization of the Office of Civilian Radioactive Waste Management in 1990, the Yucca Mountain Project was renamed Yucca Mountain Site Characterization Project. The title of this bibliography was also changed to Yucca Mountain Site Characterization Project Bibliography. Prior to August 5, 1988, this project was called the Nevada Nuclear Waste Storage Investigations. This bibliography contains information on this ongoing project which was added to the Department of Energy`s Energy Science and Technology Database from January 1, 1994, through December 31, 1995. The bibliography is categorized by principal project participating organization. Participant-sponsored subcontractor reports, papers, and articles are included in the sponsoring organization`s list. Another section contains information about publications on the Energy Science and Technology database which were not sponsored by the project but have some relevance to it.

  8. Radiation and biophysical studies on cells and viruses. Progress report 1 July 1977--30 June 1978. [Particle beam irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Cole, Arthur; Ansevin, Allen T.; Corry, Peter M.

    1978-08-01

    Studies on genetic structure included arrangement of interphase and mitotic chromosomes, nucleoproteins, and DNA. Studies on analysis of sensitive sites by particle beam irradiation included location of cellular sites for mutation induction and cell transformation. Studies on radiation damage and repair and radiation as an investigative tool included damage to nuclear proteins and other model systems; detection and quantitation of cell surface antigens; interaction of hyperthermia and irradiation; radioinduced cell transformation alkaline elution studies of damage and repair; and low dose, low LET lethality. (HLW)

  9. Investigation of irradiation strengthening of b.c.c. metals and their alloys. Progress report, January 1975--October 1975

    International Nuclear Information System (INIS)

    1975-01-01

    Results of studies on radiation strengthening of V, Mo, and Nb are presented. Information is included on deformation characteristics of low-temperature neutron-irradiated Nb, the effects of He 3+ on the low-temperature deformation characteristics of Nb, electron-transmission microscopic studies of the nature of neutron damage effects of post-irradiation annealing, microplasticity, thermally activated dislocation motion, production of high-purity Nb and V, early stages of flow in Mo, microplasticity in V, and effects of impurity interstitials on the lattice resistance to dislocation motion. (JRD)

  10. Final report for project "Effects of Low-Dose Irradiation on NFkB Signaling Networks and Mitochondria"

    Energy Technology Data Exchange (ETDEWEB)

    Woloschak, Gayle E [Northwestern Univ., Evanston, IL (United States); Grdina, David [Univ. of Chicago, IL (United States); Li, Jian-Jian [Univ. of California, Davis, CA (United States)

    2017-06-12

    Low dose ionizing radiation effects are difficult to study in human population because of the numerous confounding factors such as genetic and lifestyle differences. Research in mammalian model systems and in vitro is generally used in order to overcome this difficulty. In this program project three projects have joined together to investigate effects of low doses of ionizing radiation. These are doses at and below 10 cGy of low linear energy transfer ionizing radiation such as X-ray and gamma rays. This project was focused on cellular signaling associated with nuclear factor kappa B (NFkB) and mitochondria - subcellular organelles critical for cell aging and aging-like changes induced by ionizing radiation. In addition to cells in culture this project utilized animal tissues accumulated in a radiation biology tissue archive housed at Northwestern University (http://janus.northwestern.edu/janus2/index.php). Major trust of Project 1 was to gather all of the DoE sponsored irradiated animal (mouse, rat and dog) data and tissues under one roof and investigate mitochondrial DNA changes and micro RNA changes in these samples. Through comparison of different samples we were trying to delineate mitochondrial DNA quantity alterations and micro RNA expression differences associated with different doses and dose rates of radiation. Historic animal irradiation experiments sponsored by DoE were done in several national laboratories and universities between 1950’s and 1990’s; while these experiments were closed data and tissues were released to Project 1. Project 2 used cells in culture to investigate effects that low doses or radiation have on NFκB and its target genes manganese superoxide dismutase (MnSOD) and genes involved in cell cycle: Cyclins (B1 and D1) and cyclin dependent kinases (CDKs). Project 3 used cells in culture such as “normal” human cells (breast epithelial cell line MCF10A cells and skin keratinocyte cells HK18) and mouse embryo fibroblast (mef

  11. The contribution of late-generated neurons to the callosal projection in rat: a study with prenatal x-irradiation

    International Nuclear Information System (INIS)

    Jensen, K.F.; Altman, J.

    1982-01-01

    Studies utilizing horseradish peroxidase tracing methods have suggested that there are species differences in the relative contribution of the different neocortical layers to the callosal projection. The present investigation utilized x-irradiation at different gestational ages to eliminate the late-generated neurons in the rat neocortex. The caudorostral gradient of reduction in the neuronal population of the supragranular layers is closely correlated with the gradient of reduction in the size of the corpus callosum. Furthermore, the callosal projection is absent in anteroposterior cortical segments in which the development of the supragranular layers was prevented without a reduction of the number of neurons in the infragranular layers of the neocortex. These results indicate that late-generated neurons residing primarily in the supragranular layers are essential for the formation of the corpus callosum

  12. Progress report of the ECN contribution to the experiments in the HAW project

    International Nuclear Information System (INIS)

    Duijves, K.A.; Vonka, V.

    1990-12-01

    This progress report documents the progress of the ECN contribution in the High Active Waste experiment, a large-scale in situ test being performed underground at the Asse salt mine in Remlingen FRG, during the period April 1st through June 30th, 1990. In ch. 2 a general overview is given of the experiment development. Problems and solutions are discussed in ch. 3. (author). 4 refs.; 10 figs

  13. Food irradiation: Status report on italian industrial and r and d projects

    International Nuclear Information System (INIS)

    Adamo, M.; Tata, A.

    1999-01-01

    Food irradiation by means of ionising radiation, in spite of studies and applications several tens of year old, is considered an emerging technology in the present scenario of technologies able to control food borne diseases. A considerable body of research has been developed recently in Italy with particular reference to food items like poultry meat for microbiological recovery purpose, to orange fruit to avoid chemical/quarantine treatment, to pasta and flour for disinfestation/decontamination from pest and micro-organisms, to packaging materials in order to enhance stability and resistance properties, etc. A joint effort has been established between the main governmental R and D organisations (ENEA and CNR) and food industry. As a result, encouraging short-term commercial perspectives of food irradiation in Italy, also following last European Commission statements and recommendations, are easily foreseeable. Performed activities, technology status and new trends are described

  14. Characterization of third-harmonic target plan irradiance on the National Ignition Facility Beamlet demonstration project

    International Nuclear Information System (INIS)

    Wegner, P.J.; Van Wonterghem, B.M.; Dixit, S.N.; Henesian, M.A.; Barker, C.E.; Thompson, C.E.; Seppala, L.G.; Caird, J.A.

    1997-01-01

    The Beamlet laser is a single-aperture prototype for the National Ignition Facility (NIF). We have recently installed and activated a 55 m 3 vacuum vessel and associated diagnostic package at the output of the Beamlet that we are using to characterize target plane irradiance at high power. Measurements obtained both with and without a kinoform diffractive optic are reported. Dependences on critical laser parameters including output power, spatial filtering, and wavefront correction are discussed and compared with simulations

  15. High temperature graphite irradiation creep experiment in the Dragon Reactor. Dragon Project report

    Energy Technology Data Exchange (ETDEWEB)

    Manzel, R.; Everett, M. R.; Graham, L. W.

    1971-05-15

    The irradiation induced creep of pressed Gilsocarbon graphite under constant tensile stress has been investigated in an experiment carried out in FE 317 of the OECD High Temperature Gass Cooled Reactor ''Dragon'' at Winfrith (England). The experiment covered a temperature range of 850 dec C to 1240 deg C and reached a maximum fast neutron dose of 1.19 x 1021 n cm-2 NDE (Nickel Dose DIDO Equivalent). Irradiation induced dimensional changes of a string of unrestrained graphite specimens are compared with the dimensional changes of three strings of restrained graphite specimens stressed to 40%, 58%, and 70% of the initial ultimate tensile strength of pressed Gilsocarbon graphite. Total creep strains ranging from 0.18% to 1.25% have been measured and a linear dependence of creep strain on applied stress was observed. Mechanical property measurements carried out before and after irradiation demonstrate that Gilsocarbon graphite can accommodate significant creep strains without failure or structural deterioration. Total creep strains are in excellent agreement with other data, however the results indicate a relatively large temperature dependent primary creep component which at 1200 deg C approaches a value which is three times larger than the normally assumed initial elastic strain. Secondary creep constants derived from the experiment show a temperature dependence and are in fair agreement with data reported elsewhere. A possible determination of the results is given.

  16. Research within coordinated programme in Asian Regional Cooperative Project on Food Irradiation

    International Nuclear Information System (INIS)

    Hussain, A.M.

    1984-05-01

    Commercially dried marine fish (mackerel, shark, tuna and sarum) contained 36-50% moisture and 10-12% salt. During preliminary studies,there was visible mould growth on sun or oven dried freshwater Rahu fish containing moisture levels above 15.5%. Fusarium was present in samples containing more than 46% moisture, while below this level Aspergillus sp. and Penicillium sp. were present. Dipping of fish filets in 2% potassium sorbate checked the visible mould growth in irradiated (0.25 - 1 kGy) and unirradiated Rahu fish containing moisture levels of 20-40%. Radiation doses of 0.5 to 0.75 kGy were found suitable for keeping sun or oven dried samples in good and acceptable condition for six months at room temperature. Polyethylene film about 0.1 mm thick was suitable for packing dried fish as far as insect penetration, bacterial permeability, water permeability, water vapour transfer rate and weight loss of dried fish during storage were concerned. Oxygen absorbant is effective in maintaining colour, odour and texture of irradiated dried fish packaged in oxygen non-permeable packages for six months. Dried fish was acceptable to consumers except for its texture to some extent. During bulk storage of dried fish at ambient temperature for three months, there was no adverse change in the filets. About 5% of the filets were shredded to pieces during transportation of the irradiated dried fish over a distance of about 2,400 km

  17. EB treatment of wastewater and progress of on-going project in China

    International Nuclear Information System (INIS)

    Wang Zhiguang

    2006-01-01

    Electron beam processing has been widely used in China in the fields of radiation crosslinking cables and wires, heat shrinkable material, foam materials, irradiated latex and polymers, sterilization, removal SOx and NOx of flue gas, chemical industry, industrial CT, electron instrument, and so on. However, EB treatment of wastewater is mostly under study in laboratory. The manufacture of electron accelerators has also become a comparatively independent industry in China. (author)

  18. Walla Walla River Fish Passage Operations Project : Annual Progress Report October 2007 - September 2008.

    Energy Technology Data Exchange (ETDEWEB)

    Bronson, James P.; Duke, Bill; Loffink, Ken

    2008-12-30

    In the late 1990s, the Confederated Tribes of the Umatilla Indian Reservation, Oregon Department of Fish and Wildlife, and Washington Department of Fish and Wildlife, along with many other agencies, began implementing fisheries restoration activities in the Walla Walla Basin. An integral part of these efforts is to alleviate the inadequate fish migration conditions in the basin. Migration concerns are being addressed by removing diversion structures, constructing fish passage facilities, implementing minimum instream flow requirements, and providing trap and haul efforts when needed. The objective of the Walla Walla River Fish Passage Operations Project is to increase the survival of migrating adult and juvenile salmonids in the Walla Walla River basin. The project is responsible for coordinating operation and maintenance of ladders, screen sites, bypasses, trap facilities, and transportation equipment. In addition, the project provides technical input on passage and trapping facility design, operation, and criteria. Operation of the various passage facilities and passage criteria guidelines are outlined in an annual operations plan that the project develops. Beginning in March of 2007, two work elements from the Walla Walla Fish Passage Operations Project were transferred to other projects. The work element Enumeration of Adult Migration at Nursery Bridge Dam is now conducted under the Walla Walla Basin Natural Production Monitoring and Evaluation Project and the work element Provide Transportation Assistance is conducted under the Umatilla Satellite Facilities Operation and Maintenance Project. Details of these activities can be found in those project's respective annual reports.

  19. Lake Roosevelt White Sturgeon Recovery Project : Annual Progress Report, January 2003 – March 2004.

    Energy Technology Data Exchange (ETDEWEB)

    Howell, Matthew D.; McLellan, Jason G. [Washington Department of Fish and Wildlife

    2009-07-15

    This report summarizes catch data collected from white sturgeon Acipenser transmontanus in Lake Roosevelt during limited setlining and gill netting activities in the fall of 2003, and documents progress toward development of a U.S. white sturgeon conservation aquaculture program for Lake Roosevelt. From 27-30 October, 42 overnight small mesh gill net sets were made between Marcus and Northport, WA for a total catch of 15 juvenile white sturgeon (275-488 mm FL). All sturgeon captured were of Canadian hatchery origin. These fish had been previously released as sub-yearlings into the Canadian portion (Keenleyside Reach) of the Transboundary Reach of the Columbia River during 2002 and 2003. Most sturgeon (n=14) were caught in the most upstream area sampled (Northport) in low velocity eddy areas. Five fish exhibited pectoral fin deformities (curled or stunted). Growth rates were less than for juvenile sturgeon captured in the Keenleyside Reach but condition factor was similar. Condition factor was also similar to that observed in juvenile sturgeon (ages 1-8) captured in the unimpounded Columbia River below Bonneville Dam between 1987-92. From 10-14 November, 28 overnight setline sets were made in the Roosevelt Reach between the confluence of the Spokane River and Marcus Island for a total catch of 17 white sturgeon (94-213 cm FL). Catch was greatest in the most upstream areas sampled, a distribution similar to that observed during a WDFW setline survey in Lake Roosevelt in 1998. The mean W{sub r} index of 110% for fish captured this year was higher than the mean W{sub r} of 91% for fish captured in 1998. Excellent fish condition hindered surgical examination of gonads as lipid deposits made the ventral body wall very thick and difficult to penetrate with available otoscope specula. Acoustic tags (Vemco model V16 coded pingers, 69 kHz, 48-month life expectancy) were internally applied to 15 fish for subsequent telemetry investigations of seasonal and reproductively

  20. Mirage project. Second summary progress report (Work period January to December 1984)

    International Nuclear Information System (INIS)

    Come, B.

    1985-01-01

    This report summarizes the second year of work (1984) in the CEC project MIRAGE on migration of radionuclides in the geosphere. It complements CEC reports EUR 9304 (Description of the project) and EUR 9543 (Works carried out in 1983) on the same topic

  1. High Performance Parallel Processing Project: Industrial computing initiative. Progress reports for fiscal year 1995

    Energy Technology Data Exchange (ETDEWEB)

    Koniges, A.

    1996-02-09

    This project is a package of 11 individual CRADA`s plus hardware. This innovative project established a three-year multi-party collaboration that is significantly accelerating the availability of commercial massively parallel processing computing software technology to U.S. government, academic, and industrial end-users. This report contains individual presentations from nine principal investigators along with overall program information.

  2. Projected progress in the engineering state-of-the-art. [for aerospace

    Science.gov (United States)

    Nicks, O. W.

    1978-01-01

    Projected advances in discipline areas associated with aerospace engineering are discussed. The areas examined are propulsion and power, materials and structures, aerothermodynamics, and electronics. Attention is directed to interdisciplinary relationships; one example would be the application of communications technology to the solution of propulsion problems. Examples involving projected technology changes are presented, and technology integration and societal effects are considered.

  3. Chernobyl Studies Project - working group 7.0 environmental transport and health effects. Progress report, October 1993--January 1994

    Energy Technology Data Exchange (ETDEWEB)

    Hendrickson, S.M. [ed.

    1994-03-01

    The DOE-funded Chernobyl Studies Project was begun as part of a cooperative agreement between the US and the former USSR, (quote) To develop jointly methods to project rapidly the health effects of any future reactor accident (quote). Most of the initial tasks for this project are completed or near completion. The focus has now turned primarily to the issue of health effects from the Chernobyl accident. Currently, we are extensively engaged in case-control and cohort studies of thyroid diseases among Belarussian children and in the Ukraine. A major part of the effort is providing methods and applications of dose reconstruction and providing support and equipment for the medical teams. This document contains reports on progress in the following task areas: Management; External Dose; Hydrological Transport; Chromosome Painting Dosimetry; Stochastic Effects; Thyroid Studies; and Leukemia Studies.

  4. Technical progress in planning organization of the Ostravo-Karwina coal basin, ''Mining Projects of Ostravo''

    Energy Technology Data Exchange (ETDEWEB)

    Karpeta, B; Kolar, J

    1979-01-01

    Based on the main task of further improvement in labor productivity and improvement in the quality of products, the leading planning organization of the Ostravo-Karwina basin is planning and realizing progressive technological plans based on new equipment. Long-term plans for basin development up to 1990 stipulate a rise in capital investments by 180%, increase in the volume of productivity by 164% with a rise in the number of workers by 142%. Corresponding technical progress in planning is based on an improvement in the system of scientific-technical information, automation and technical equipping of the planning process, improvements in the forms and organizational structure. Organization of specialized research-planning groups to substantiate and to technically-economically evaluate technical progress, and also to develop comprehensive technical assignments is stipulated.

  5. Overview of progress on the improvement projects for the LANSCE accelerator and target facilities

    International Nuclear Information System (INIS)

    Macek, R.J.; Browne, J.; Brun, T.; Donahue, J.B.; Fitzgerald, D.H.; Hoffman, E.; Pynn, R.; Schriber, S.; Weinacht, D.

    1997-01-01

    Three projects have been initiated since 1994 to improve the performance of the accelerator and target facilities for the Los Alamos Neutron Science Center (LANSCE). The LANSCE Reliability Improvement Project (LRIP) was separated into two phases. Phase 1, completed in 1995, targeted near-term improvements to beam reliability and availability that could be completed in one-year's time. Phase 2, now underway and scheduled for completion in May 1998, consists of two projects: (a) implementation of direct H-injection for the Proton Storage Ring (PSR) and (b) an upgrade of the target/moderator system for the short pulse spallation neutron (SPSS) source. The latter will reduce the target change-out time from about 10 months to about three weeks. The third project, the SPSS Enhancement Project, is aimed at increasing the PSR output beam current to 200 microA at 30 Hz and providing up to seven new neutron scattering instruments

  6. Processing of Irradiated Graphite to Meet Acceptance Criteria for Waste Disposal. Results of a Coordinated Research Project. Companion CD-ROM

    International Nuclear Information System (INIS)

    2016-05-01

    Graphite is widely used in the nuclear industry and in research facilities and this has led to increasing amounts of irradiated graphite residing in temporary storage facilities pending disposal. This publication arises from a coordinated research project (CRP) on the processing of irradiated graphite to meet acceptance criteria for waste disposal. It presents the findings of the CRP, the general conclusions and recommendations. The topics covered include, graphite management issues, characterization of irradiated graphite, processing and treatment, immobilization and disposal. Included on the attached CD-ROM are formal reports from the participants

  7. Irradiation to ensure the safety and quality of prepared meals. Results of the coordinated research project (2002-2006)

    International Nuclear Information System (INIS)

    2009-02-01

    The consumption of prepared meals has increased enormously during the last decade, not only in developed countries but also in developing countries where many types of ethnic foods are now also prepared as convenience foods. Consumer studies carried out on the consumption of these types of foods have shown that perceived time pressures contribute positively to the purchase of both prepared meals and takeaway meals. Other reasons are also mentioned in the literature, among them are the increasing proportion of working women outside of the home, not enjoying cooking for oneself and the need of family members to eat at different times. Traditionally, prepared meals are retort processed, or, more recently, stored frozen, whereas an increasing demand exists for chilled commodities, partly due to their fresh appearance. However, the chilled prepared meals are non-sterile and potential survival of some pathogenic microorganisms and/or post-processing contamination before packaging creates microbiological risks and a considerable limitation of shelf life. This is particularly important for countries where the microbiological safety of many ethnic prepared meals is questionable and their shelf life limited due to the conditions under which they are produced, stored and distributed. Food irradiation used on its own, or in combination with other technologies, could significantly enhance the microbial safety of such products as well as extend their shelf life. Although extensive research has been carried out on the microbiological, chemical, nutritional and sensorial effects of irradiating individual uncooked food items, little work has been reported on the irradiation of complex food systems such as prepared meals. In 2002, the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture initiated in a Coordinated Research Project on Irradiation to Ensure the Safety and Quality of Prepared Meals. This project included the studies of participants from different

  8. Development of advanced blanket performance under irradiation and system integration through JUPITER-II project

    Energy Technology Data Exchange (ETDEWEB)

    Abe, Katsunori; Kohyama, Akira; Tanaka, Satoru; Namba, C.; Terai, T.; Kunugi, T.; Muroga, Takeo; Hasegawa, Akira; Sagara, A.; Berk, S.; Zinkle, Steven J.; Sze, Dai Kai; Petti, D. A.; Abdou, Mohamed A.; Morley, Neil B.; Kurtz, Richard J.; Snead, Lance L.; Ghoniem, Nasr M.

    2008-12-01

    This report describes an outline of the activities of the JUPITER-II collaboration (japan-USA program of Irradiation/Integration test for Fusion Research-II), Which has bee carried out through six years (2001-2006) under Phase 4 of the collabroation implemented by Amendment 4 of Annex 1 to the DOE (United States Department of Energy)-MEXT (Ministry of Education ,Culture,Sports,Science and Technology) Cooperation. This program followed the RTNS-II Program (Phase1:1982-4986), the FFTF/MOTA Program (Phase2:1987-1994) and the JUPITER Program (Phase 3: 1995-2000) [1].

  9. Measuring radiation damage dynamics by pulsed ion beam irradiation: 2016 project annual report

    Energy Technology Data Exchange (ETDEWEB)

    Kucheyev, Sergei O. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-01-04

    The major goal of this project is to develop and demonstrate a novel experimental approach to access the dynamic regime of radiation damage formation in nuclear materials. In particular, the project exploits a pulsed-ion-beam method in order to gain insight into defect interaction dynamics by measuring effective defect interaction time constants and defect diffusion lengths. For Year 3, this project had the following two major milestones: (i) the demonstration of the measurement of thermally activated defect-interaction processes by pulsed ion beam techniques and (ii) the demonstration of alternative characterization techniques to study defect dynamics. As we describe below, both of these milestones have been met.

  10. Ceramic technology for advanced heat engines project: Semiannual progress report for April through September 1986

    Energy Technology Data Exchange (ETDEWEB)

    1987-03-01

    An assessment of needs was completed, and a five-year project plan was developed with extensive input from private industry. Objective is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines.

  11. Experimental Physics Division of the Los Alamos Project. Progress report No. 4

    Energy Technology Data Exchange (ETDEWEB)

    1943-09-01

    Included in this semi-monthly report written in 1943 are progress with neutron beams, neutron absorption in enriched materials, equipment operation and maintenance reports of the cyclotron neutron source facility, and instrumentation maintenance activities of individuals in the cyclotron group. (GHT)

  12. Progress report of the ECN contribution to the experiments in the HAW project

    International Nuclear Information System (INIS)

    Duijves, K.A.; Vonka, V.

    1991-08-01

    This report documents the progress of the ECN contribution in the High Active Waste Experiment, a large-scale in-situ test being performed underground in the Asse salt mine, Remlingen, FRG, during the period January 1st through March 31st, 1991. (A.S.). 3 refs.; 10 figs

  13. Coast Guard: Progress Being Made on Deepwater Project, but Risks Remain

    National Research Council Canada - National Science Library

    2001-01-01

    The Coast Guard is in the final stages of planning the largest procurement project in its history the modernization and/or replacement of over 90 cutters and 200 aircraft used for missions beyond 50 miles from shore...

  14. Progress on ANSTO'S OPAL reactor project and its future importance as the centrepiece of ANSTO'S facilities

    International Nuclear Information System (INIS)

    Smith, I.O.

    2006-01-01

    Full text: After an intensive process of analysis, the Australian government approved the construction of a multi-purpose research reactor in 1997. Following the conduct of a comprehensive tender evaluation process in 1998-2000, INVAP was contracted to construct a 20 MW open pool research reactor and associated neutron beam facilities. The construction of the reactor is now almost complete, and we have commenced cold commissioning. ANSTO has applied for an operating licence, and we hope for a decision on that application in June, following the consideration by the regulator of the results of cold commissioning. The OPAL reactor will provide neutrons to a world-class neutron beam facility, in which a number of the instruments will have the best performance available in the world to date. We intend to establish the Bragg Institute as a regional centre of excellence on neutron beam science, with a significant number of international scientists using the facility to produce cutting edge science in the fields of biology, materials science, food science and other area. The reactor also has extensive irradiation facilities within the reflector vessel. These facilities will be used to produce medical isotopes - ANSTO supplies the bulk of the Australian market and also exports into this region - and for the transmutation doping of silicon ingots for semiconductor manufacture. There are also a number of pneumatically loaded radiation facilities allowing for short term irradiation of samples for such activities as neutron activation analysis

  15. SEU blending project, concept to commercial operation, Part 3: production of powder for demonstration irradiation fuel bundles

    International Nuclear Information System (INIS)

    Ioffe, M.S.; Bhattacharjee, S.; Oliver, A.J.; Ozberk, E.

    2005-01-01

    The processes for production of Slightly Enriched Uranium (SEU) dioxide powder and Blended Dysprosium and Uranium (BDU) oxide powder that were developed at laboratory scale at Cameco Technology Development (CTD), were implemented and further optimized to supply to Zircatec Precision Industries (ZPI) the quantities required for manufacturing twenty six Low Void Reactivity (LVRF) CANFLEX fuel bundles. The production of this new fuel was a challenge for CTD and involved significant amount of work to prepare and review documentation, develop and approve new analytical procedures, and go through numerous internal reviews and audits by Bruce Power, CNSC and third parties independent consultants that verified the process and product quality. The audits were conducted by Quality Assurance specialists as well as by Human Factor Engineering experts with the objective to systematically address the role of human errors in the manufacturing of New Fuel and confirm whether or not a credible basis had been established for preventing human errors. The project team successfully passed through these audits. The project management structure that was established during the SEU and BDU blending process development, which included a cross-functional project team from several departments within Cameco, maintained its functionality when Cameco Technology Development was producing the powder for manufacturing Demonstration Irradiation fuel bundles. Special emphasis was placed on the consistency of operating steps and product quality certification, independent quality surveillance, materials segregation protocol, enhanced safety requirements, and accurate uranium accountability. (author)

  16. Low cost solar array project. Quarterly progress report, January-March, 1981

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    The engineering design, fabrication, assembly, operation, economic analysis, and process support R and D for an Experimental Process System Development Unit (EPSDU) are presented. The civil construction work was completed and the mechanical bid package is in preparation. The electrical design effort is in progress. Parallel efforts which complement the mechanical design are the process flow diagrams and control instrumentation logic for startup operation and shutdown. These are in progress and will identify all process and utility streams, control systems, and flow logic. The data collection system takes the signals from the instrumentation, translates them into engineering units and finally develops a data report which summarizes all key performance parameters. Cleaning procedures have been established to assure a contamination-free product and inspection visits have been made to the fabricators of specialty equipment.

  17. Geostatistics project of the National Uranium Resources Evaluation Program. Progress report, October 1978--March 1979

    International Nuclear Information System (INIS)

    Beckman, R.J.; Bement, T.R.; Campbell, K.; Howell, J.S.; Wecksung, G.W.; Whitemann, D.E.

    1979-01-01

    During the period covered by this report, research was concentrated on multivariate approaches to the analysis of aerial radiometric data. Two aspects of principal components analysis were the subjects of two publications. The procedures recommended for linear discriminant analysis were revised. Progress was made in overlaying LANDSAT data with aerial radiometric data from the Lubbock quadrangle. Some preliminary results from principal components analysis of the Wind River data were obtained

  18. The Umatilla Basin Natural Production Monitoring and Evaluation Project, 2008 Annual Progress Report.

    Energy Technology Data Exchange (ETDEWEB)

    Contor, Craig R.; Harris, Robin; King, Marty [Confederated Tribes of the Umatilla Indian Reservation

    2009-06-10

    The Umatilla Basin Natural Production Monitoring and Evaluation Project (UBNPMEP) is funded by Bonneville Power Administration (BPA) as directed by section 4(h) of the Pacific Northwest Electric Power Planning and Conservation Act of 1980 (P.L.96-501). This project is in accordance with and pursuant to measures 4.2A, 4.3C.1, 7.1A.2, 7.1C.3, 7.1C.4 and 7.1D.2 of the Northwest Power Planning Council's (NPPC) Columbia River Basin Fish and Wildlife Program (NPPC 1994). Work was conducted by the Fisheries Program of the Confederated Tribes of the Umatilla Indian Reservation (CTUIR). The UBNPMEP is coordinated with two Oregon Department of Fish and Wildlife (ODFW) research projects that also monitor and evaluate the success of the Umatilla Fisheries Restoration Plan. This project deals with the natural production component of the plan, and the ODFW projects evaluate hatchery operations (project No. 1990-005-00, Umatilla Hatchery M & E) and smolt outmigration (project No. 1989-024-01, Evaluation of Juvenile Salmonid Outmigration and Survival in the Lower Umatilla River). Collectively these three projects monitor and evaluate natural and hatchery salmonid production in the Umatilla River Basin. The need for natural production monitoring has been identified in multiple planning documents including Wy-Kan-Ush-Mi Wa-Kish-Wit Volume I, 5b-13 (CRITFC 1996), the Umatilla Hatchery Master Plan (CTUIR & ODFW 1990), the Umatilla Basin Annual Operation Plan, the Umatilla Subbasin Summary (CTUIR & ODFW 2001), the Subbasin Plan (CTUIR & ODFW 2004), and the Comprehensive Research, Monitoring, and Evaluation Plan (CTUIR and ODFW 2006). Natural production monitoring and evaluation is also consistent with Section III, Basinwide Provisions, Strategy 9 of the 2000 Columbia River Basin Fish and Wildlife Program (NPPC 1994, NPCC 2004). The Umatilla Basin M&E plan developed along with efforts to restore natural populations of spring and fall Chinook salmon, (Oncorhynchus tshawytsha), coho

  19. Chemical decomposition of high-level nuclear waste storage/disposal glasses under irradiation. 1997 annual progress report

    International Nuclear Information System (INIS)

    Griscom, D.L.; Merzbacher, C.I.

    1997-01-01

    'The objective of this research is to use the sensitive technique of electron spin resonance (ESR) to look for evidence of radiation-induced chemical decomposition of vitreous forms contemplated for immobilization of plutonium and/or high-level nuclear wastes, to interpret this evidence in terms of existing knowledge of glass structure, and to recommend certain materials for further study by other techniques, particularly electron microscopy and measurements of gas evolution by high-vacuum mass spectroscopy. Previous ESR studies had demonstrated that an effect of y rays on a simple binary potassium silicate glass was to induce superoxide (O 2 - ) and ozonide (O 3 - ) as relatively stable product of long-term irradiation Accordingly, some of the first experiments performed as a part of the present effort involved repeating this work. A glass of composition 44 K 2 O: 56 SiO 2 was prepared from reagent grade K 2 CO3 and SiO 2 powders melted in a Pt crucible in air at 1,200 C for 1.5 hr. A sample irradiated to a dose of 1 MGy (1 MGy = 10 8 rad) indeed yielded the same ESR results as before. To test the notion that the complex oxygen ions detected may be harbingers of radiation-induced phase separation or bubble formation, a small-angle neutron scattering (SANS) experiment was performed. SANS is theoretically capable of detecting voids or bubbles as small as 10 305 in diameter. A preliminary experiment was carried out with the collaboration of Dr. John Barker (NIST). The SANS spectra for the irradiated and unirradiated samples were indistiguishable. A relatively high incoherent background (probably due to the presence of protons) may obscure scattering from small gas bubbles and therefore decrease the effective resolution of this technique. No further SANS experiments are planned at this time.'

  20. Scleral Cross-Linking Using Riboflavin UVA Irradiation for the Prevention of Myopia Progression in a Guinea Pig Model: Blocked Axial Extension and Altered Scleral Microstructure.

    Directory of Open Access Journals (Sweden)

    Shuai Liu

    Full Text Available To develop methods of collagen cross-linking (CXL in the sclera for the treatment of progressive myopia and to investigate the biomechanical and histological changes that occur in as a result.Twenty 14-day-old guinea pigs were divided into 3 groups: the cross-linking group (CL, n = 8, non cross-linking group (NCL, n = 8, and control group (n = 4. The scleras of the right eyes of the guinea pigs in the CL group were surgically exposed and riboflavin was dropped onto the irradiation zone for 20 seconds prior to ultraviolet-A (UVA irradiation. The same procedure was conducted on the NCL group but without UVA irradiation. No procedure was conducted on the control group. The right eyes of the guinea pigs in the CL and NCL groups were then fitted with -10.00DS optics for six weeks. Retinoscopy and the axial lengths (AXL were measured at baseline, and at the second, fourth and sixth weeks post-treatment in all three groups. All animal subjects were euthanized after the sixth week and then biomechanical and histopathological examinations of the scleras were conducted.The mean AXL of the NCL group was longer than both the control and CL groups at six weeks (P = 0.001. The mean refractive error in the NCL group was statistically significantly more negative than both the control and the CL groups at six weeks (P = 0.001. The scleral collagen fiber arrangements of the CL and control groups were denser and more regularly distributed than the NCL group. Ultimate stress of the sclera was lowest in the NCL group, followed by the CL then the control group (P<0.05. Ultimate strain (% of the sclera was lowest in the CL group followed by the NCL and then the control group (P<0.05.Our study demonstrates that scleral CXL using riboflavin UVA irradiation effectively prevents the progression of myopia by increasing scleral biomechanical strength in a guinea pig model.

  1. SERI Solar Radiation Resource Assessment Project: Fiscal Year 1990 Annual Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Riordan, C; Maxwell, E; Stoffel, T; Rymes, M; Wilcox, S

    1991-07-01

    The purpose of the Solar Radiation Resource Project is to help meet the needs of the public, government, industry, and utilities for solar radiation data, models, and assessments as required to develop, design, deploy, and operate solar energy conversion systems. The project scientists produce information on the spatial (geographic), temporal (hourly, daily, and seasonal), and spectral (wavelength distribution) variability of solar radiation at different locations in the United States. Resources committed to the project in FY 1990 supported about four staff members, including part-time administrative support. With these resources, the staff must concentrate on solar radiation resource assessment in the United States; funds do not allow for significant efforts to respond to a common need for improved worldwide data. 34 refs., 21 figs., 6 tabs.

  2. The SHARPn project on secondary use of Electronic Medical Record data: progress, plans, and possibilities.

    Science.gov (United States)

    Chute, Christopher G; Pathak, Jyotishman; Savova, Guergana K; Bailey, Kent R; Schor, Marshall I; Hart, Lacey A; Beebe, Calvin E; Huff, Stanley M

    2011-01-01

    SHARPn is a collaboration among 16 academic and industry partners committed to the production and distribution of high-quality software artifacts that support the secondary use of EMR data. Areas of emphasis are data normalization, natural language processing, high-throughput phenotyping, and data quality metrics. Our work avails the industrial scalability afforded by the Unstructured Information Management Architecture (UIMA) from IBM Watson Research labs, the same framework which underpins the Watson Jeopardy demonstration. This descriptive paper outlines our present work and achievements, and presages our trajectory for the remainder of the funding period. The project is one of the four Strategic Health IT Advanced Research Projects (SHARP) projects funded by the Office of the National Coordinator in 2010.

  3. Passive ALWR safety: the ALPHA project at Switzerland's PSI - a progress report

    International Nuclear Information System (INIS)

    Yadigaroglu, G.; Varadi, G.; Dreier, J.

    1995-01-01

    The Paul Scherrer Institute (PSI) initiated the ALPHA project in 1991 for the experimental and analytical investigation of the long-term decay heat removal from the containment of the next generation of 'passive' advanced light water reactors (ALWRs). The dynamic containment response to such systems, as well as containment phenomena, are investigated. The ALPHA project includes integral system tests in the large-scale (1:25 in volume) PANDA facility; the smaller-scale separate effects LINX series of tests related to various passive containment mixing, stratification, and condensation phenomena in the presence of non-condensable gases; the AIDA tests on the behavior of aerosols in passive containment cooling systems (PCCS); and supporting analytical work. The project has been, so far, directed mainly to the investigation of the General Electric simplified boiling water reactor (SBWR) PCCS and related phenomena. (author) 2 figs., 4 refs

  4. Development of a wind farm noise propagation prediction model - project progress to date

    International Nuclear Information System (INIS)

    Robinson, P.; Bullmore, A.; Bass, J.; Sloth, E.

    1998-01-01

    This paper describes a twelve month measurement campaign which is part of a European project (CEC Project JOR3-CT95-0051) with the aim to substantially reduce the uncertainties involved in predicting environmentally radiated noise levels from wind farms (1). This will be achieved by comparing noise levels measure at varying distances from single and multiple sources over differing complexities of terrain with those predicted using a number of currently adopted sound propagation models. Specific objectives within the project are to: establish the important parameters controlling the propagation of wind farm noise to the far field; develop a planning tool for predicting wind farm noise emission levels under practically encountered conditions; place confidence limits on the upper and lower bounds of the noise levels predicted, thus enabling developers to quantify the risk whether noise emission from wind farms will cause nuisance to nearby residents. (Author)

  5. Ceramic technology for advanced heat engines project. Semiannual progress report, April-September 1985

    Energy Technology Data Exchange (ETDEWEB)

    1986-05-01

    An assessment of needs was completed, and a five-year project plan was developed with input from private industry. Objective is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. Focus is on structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines. The work described in this report is organized according to the following WBS project elements: management and coordination; materials and processing (monolithics, ceramic composites, thermal and wear coatings, joining); materials design methodology (contact interfaces, new concepts); data base and life prediction (time-dependent behavior, environmental effects, fracture mechanics, NDE development); and technology transfer. This report includes contributions from all currently active project participants.

  6. Alexandre - a multi-project, multi-material and multi-technique action for an irradiation experiment in Osiris and post irradiation examination

    International Nuclear Information System (INIS)

    Averty, X.; Brachet, J.C.; Bertin, J.L.; Pizzanelli, J.P.; Rozenblum, F.

    1999-01-01

    This paper presents the data obtained on different classes of steels neutron irradiated at 325 deg C in pressurized water with a PWR-type chemistry. This irradiation, nicknamed 'Alexandre', took place in the OSIRIS reactor and finished in November 1999, for a maximum irradiation damage of ∼9 dpa. The preliminary results (up to 3.4 dpa), discussed in relation to chemical composition and initial metallurgical conditions, are listed below: - Evolution of the mechanical properties as a function of irradiation dose including the measurements of the Reduction-in-Area to failure by image analysis. - Comparison between out-of-pile and in-pile uniform corrosion. - Microstructural aspects (fractography, Transmission Electron Microscopy, and Small Angle Neutron Scattering measurements). - Post-irradiation evolution of residual. activity. (authors)

  7. Measuring radiation damage dynamics by pulsed ion beam irradiation. 2015 Annual Progress Report for DOE/NE/NEET

    Energy Technology Data Exchange (ETDEWEB)

    Kucheyev, S. O. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-03-07

    The major goal of this project is to develop and demonstrate a novel experimental approach to access the dynamic regime of radiation damage formation processes in nuclear materials. In particular, the project exploits a pulsed-ion-beam method in order to gain insight into defect interaction dynamics by measuring effective defect interaction time constants and defect diffusion lengths. For Year 2, this project had the following two major milestones: (i) measurement of the temperature dependence of defect dynamics in SiC and (ii) the evaluation of the robustness of the pulsed beam method from studies of the defect generation rate. As we describe below, both of these milestones have been met.

  8. Geothermal direct-heat utilization assistance. Quarterly project progress report, July 1996--September 1996. Federal Assistance Program

    Energy Technology Data Exchange (ETDEWEB)

    Lienau, P.

    1996-11-01

    This report summarizes geothermal technical assistance, R&D and technology transfer activities of the Geo-Heat Center at Oregon Institute of Technology for the fourth quarter of FY-96. It describes 152 contacts with parties during this period related to technical assistance with geothermal direct heat projects. Areas dealt with include geothermal heat pumps, space heating, greenhouses, aquaculture, equipment, economics and resources. Research activities are summarized on greenhouse peaking. Outreach activities include the publication of a geothermal direct use Bulletin, dissemination of information, geothermal library, technical papers and seminars, and progress monitor reports on geothermal resources and utilization.

  9. Trends and projections in Europe 2013. Tracking progress towards Europe's climate and energy targets until 2020

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-10-01

    This report provide an assessment of the progress of the EU and European countries towards achieving their climate mitigation and energy policy objectives. These targets include international commitments pursuant the KP and the EU 2020 commitment to reduce by 20 % greenhouse gas (GHG) emissions compared to 1990, to create 20 % of energy consumption from renewables and to increase energy efficiency by 20 %. The assessment is based on GHG data for the period 2008-2012, including recent estimates of proxy 2012 GHG emissions, GHG projections until 2020 submitted by Member States in 2013, as well as energy statistics until 2011. (Author)

  10. Progress on the Design of the Storage Ring Vacuum System for the Advanced Photon Source Upgrade Project

    Energy Technology Data Exchange (ETDEWEB)

    Stillwell, B.; Billett, B.; Brajuskovic, B.; Carter, J.; Kirkus, E.; Lale, M.; Lerch, J.; Noonan, J.; O' Neill, M.; Rocke, B.; Suthar, K.; Walters, D.; Wiemerslage, G.; Zientek, J.

    2017-06-20

    Recent work on the design of the storage ring vacuum system for the Advanced Photon Source Upgrade project (APS-U) includes: revising the vacuum system design to accommodate a new lattice with reverse bend magnets, modifying the designs of vacuum chambers in the FODO sections for more intense incident synchrotron radiation power, modifying the design of rf-shielding bellows liners for better performance and reliability, modifying photon absorber designs to make better use of available space, and integrated planning of components needed in the injection, extraction and rf cavity straight sections. An overview of progress in these areas is presented.

  11. The Human Genome Project and Mental Retardation: An Educational Program. Final Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Davis, Sharon

    1999-05-03

    The Arc, a national organization on mental retardation, conducted an educational program for members, many of whom have a family member with a genetic condition causing mental retardation. The project informed members about the Human Genome scientific efforts, conducted training regarding ethical, legal and social implications and involved members in issue discussions. Short reports and fact sheets on genetic and ELSI topics were disseminated to 2,200 of the Arc's leaders across the country and to other interested individuals. Materials produced by the project can e found on the Arc's web site, TheArc.org.

  12. HIFS VNL Monthly Progress Report Preparation for NDCX-II Project

    International Nuclear Information System (INIS)

    Logan, Grant; Kwan, Joe; Barnard, John; Friedman, Alex; Gilson, Erik; Leitner, Matthaeus; Waldron, Will; Bieniosek, Frank

    2009-01-01

    In preparation for the project and for anticipated review in August, the HIFS-VNL hosted an NDCX-II Advisory Meeting at LBNL on May 27, 2009. A number of experts in accelerator physics, engineering, and construction were asked to visit for a full day, listen to presentations on the project, its goals, and its status, and to offer their advice on how best to proceed, what topics needed attention, and what technical options seemed most attractive to them. This was a productive meeting, and the Committee's comments will provide useful guidance.

  13. Research projects into the safety of nuclear power plants. Period covered: 01. July - 31. December 2004. Progress report

    International Nuclear Information System (INIS)

    2004-01-01

    Within its competence for energy research, the Bundesministerium fuer Wirtschaft und Technology (BMWi) (Federal Ministry of Economics and Technology) sponsors investigations into the safety of nuclear power plants. The objective of these investigations is to provide fundamental knowledge, procedures and methods to contribute to realistic safety assessments of nuclear installations, to the further development of safety technology and to make use of the potential of innovative safety-related approaches. The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, by order of the BMWi, continuously issues information on the status of such investigations by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work and are published by the Research Management Division of GRS within the framework of general information on the progress in reactor safety research. The compilation of the reports is classified according to general topics related to reactor safety research. Further, use is made of the classification system 'Joint Safety Research Index' of the CEC (Commission of the European Communities). The reports are arranged in sequence of their project numbers. It has to be pointed out that the authors of the reports are responsible for the contents of this compilation. The BMWi does not take any responsibility for the correctness, exactness and completeness of the information nor for the observance of private claims of third parties. (orig.)

  14. European Fusion Programme. ITER task T23: Beryllium characterisation. Progress report. Tensile tests on neutron irradiated and reference beryllium

    International Nuclear Information System (INIS)

    Moons, F.

    1996-02-01

    As part of the European Technology Fusion Programme, the irradiation embrittlement characteristics of the more ductile and isotopic grades of beryllium manufactured by Brush Wellman has been investigated using modern powder production and consolidation techniques . This study was initiated in support of the development and evaluation of beryllium as a neutron multiplier for the solid breeder blanket design concepts proposed for a DEMO fusion power reactor. Four different species of beryllium: S-200 F (vacuum hot pressed, 1.2 wt% BeO), S-200FH (hot isostatic pressed, 0.9 wt% BeO), S-65 (vacuum hot pressed, 0.6 wt% BeO), S-65H (hot isostatic pressed, 0.5 wt% BeO) have been compared. Three batches of the beryllium have been investigated, a neutron batch, a thermal control batch and a reference batch. Neutron irradiation has been performed at temperatures between 175 and 605 degrees Celsius up to a neutron fluence of 2.1 10 25 n.m -2 (E> 1 MeV) or 750 appm He. The results of the tensile tests are summarized

  15. Resource Conservation and Recovery Act ground-water monitoring projects for Hanford Facilities: Progress report, July 1--September 30, 1989

    International Nuclear Information System (INIS)

    Smith, R.M.; Bates, D.J.; Lundgren, R.E.

    1989-12-01

    This is Volume 1 of a two-volume document that describes the progress of 14 Hanford Site ground-water monitoring projects for the period July 1 to September 30, 1989. This volume discusses the projects; Volume 2 provides as-built diagrams, completion/inspection reports, drilling logs, and geophysical logs for wells drilled, completed, or logged during this period. Volume 2 can be found on microfiche in the back pocket of Volume 1. The work described in this document is conducted by the Pacific Northwest Laboratory under the management of Westinghouse Hanford Company for the US Department of Energy. Concentrations of ground-water constituents are compared to federal drinking water standards throughout this document for reference purposes. All drinking water supplied from the sampled aquifer meets regulatory standards for drinking water quality

  16. Geothermal direct-heat utilization assistance: Federal assistance program. Quarterly project progress report, October--December 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    The report summarizes geothermal technical assistance, R&D and technology transfer activities of the Geo-Heat Center at Oregon Institute of Technology for the first quarter of FY-96. It describes 90 contacts with parties during this period related to technical assistance with geothermal direct heat projects. Areas dealt with include geothermal heat pumps, space heating, greenhouses, aquaculture, equipment and resources. Research activities are summarized on low-temperature resource assessment, geothermal district heating system cost evaluation and silica waste utilization project. Outreach activities include the publication of a geothermal direct use Bulletin, dissemination of information, geothermal library, technical papers and seminars, development of a webpage, and progress monitor reports on geothermal resources and utilization.

  17. STYLE - A European Project on Structural Integrity: Progress of the work after 2 Years

    International Nuclear Information System (INIS)

    Heussner, Stefan; Nicak, Tomas; Keim, Elisabeth

    2012-01-01

    The overall objective of STYLE is to assess, optimise and develop the use of advanced tools for the structural integrity assessment of components relevant to ageing and life time management and to support the integration of the knowledge created in the project into main-stream nuclear industry assessment codes.

  18. Nuclear chemistry project. Progress report, January 1, 1978--December 31, 1978

    International Nuclear Information System (INIS)

    Naumann, R.A.

    1978-01-01

    Research on the nuclear chemistry project is summarized including Coulomb capture of negative muons by atoms and molecules, nuclear structure and spectroscopy, and the preparation and use of radioactive targets both to study the internal electric fields acting on the nuclei of foreign atoms introduced in metallic solids by radioactive decay and determination of nuclear moments by optical hyperfine spectroscopy

  19. A visual progression of the Fort Valley Restoration Project treatments using remotely sensed imagery (P-53)

    Science.gov (United States)

    Joseph E. Crouse; Peter Z. Fule

    2008-01-01

    The landscape surrounding the Fort Valley Experimental Forest in northern Arizona has changed dramatically in the past decade due to the Fort Valley Restoration Project, a collaboration between the Greater Flagstaff Forest Partnership, Coconino National Forest, and Rocky Mountain Research Station. Severe wildfires in 1996 sparked community concern to start restoration...

  20. General guidelines for the assessment of internal dose from monitoring data: Progress of the IDEAS project

    International Nuclear Information System (INIS)

    Doerfel, H.; Andrasi, A.; Bailey, M.; Blanchardon, E.; Cruz-Suarez, R.; Berkovski, V.; Castellani, C. M.; Hurtgenv, C.; Leguen, B.; Malatova, I.; Marsh, J.; Stather, J.; Zeger, J.

    2007-01-01

    In recent major international intercomparison exercises on intake and internal dose assessments from monitoring data, the results calculated by different participants varied significantly. Based on this experience the need for harmonisation of the procedures has been formulated within an EU 5. Framework Programme research project. The aim of the project, IDEAS, is to develop general guidelines for standardising assessments of intakes and internal doses. The IDEAS project started in October 2001 and ended in June 2005. The project is closely related to some goals of the work of Committee 2 of the ICRP and since 2003 there has been close cooperation between the two groups. To ensure that the guidelines are applicable to a wide range of practical situations, the first step was to compile a database of well-documented cases of internal contamination. In parallel, an improved version of an existing software package was developed and distributed to the partners for further use. A large number of cases from the database was evaluated independently by the partners and the results reviewed. Based on these evaluations, guidelines were drafted and discussed with dosimetry professionals from around the world by means of a virtual workshop on the Internet early in 2004. The guidelines have been revised and refined on the basis of the experiences and discussions in this virtual workshop. The general philosophy of the Guidelines is presented here, focusing on the principles of harmonisation, optimisation and proportionality. Finally, the proposed Levels of Task to structure the approach of internal dose evaluation are reported. (authors)

  1. Review projects for the US Fusion Program: Progress report, December 1, 1984-February 28, 1987

    International Nuclear Information System (INIS)

    Ribe, F.L.

    1988-01-01

    This paper reviews projects at the University of Washington on the following topics: Magnetic Fusion Energy Program Plan (Feb. 1985); High Density Power Systems; Fusion Systems Studies; Burning Plasmas and Compact Ignition Tokamak; US Magnetic Mirror Program; and Technical Planning Activity (Jan. 1987)

  2. Tree Flora of Sabah and Sarawak projectprogress and future activities

    NARCIS (Netherlands)

    Tan, H.S.; Nadiah, I.; Eryani, S.S.

    2009-01-01

    Tropical forests in Borneo (Brunei Darussalam, Kalimantan, Sabah and Sarawak) are considered as one of the twelve mega biodiversity centres in the world. However, until now, there is no up-to-date or complete documentation on the flora of the island. The Tree Flora of Sabah and Sarawak Project,

  3. Steam Generator Group Project. Progress report on data acquisition/statistical analysis

    International Nuclear Information System (INIS)

    Doctor, P.G.; Buchanan, J.A.; McIntyre, J.M.; Hof, P.J.; Ercanbrack, S.S.

    1984-01-01

    A major task of the Steam Generator Group Project (SGGP) is to establish the reliability of the eddy current inservice inspections of PWR steam generator tubing, by comparing the eddy current data to the actual physical condition of the tubes via destructive analyses. This report describes the plans for the computer systems needed to acquire, store and analyze the diverse data to be collected during the project. The real-time acquisition of the baseline eddy current inspection data will be handled using a specially designed data acquisition computer system based on a Digital Equipment Corporation (DEC) PDP-11/44. The data will be archived in digital form for use after the project is completed. Data base management and statistical analyses will be done on a DEC VAX-11/780. Color graphics will be heavily used to summarize the data and the results of the analyses. The report describes the data that will be taken during the project and the statistical methods that will be used to analyze the data. 7 figures, 2 tables

  4. Standard Terminology for Phenotypic Variations: The Elements of Morphology Project, Its Current Progress, and Future Directions

    NARCIS (Netherlands)

    Carey, John C.; Allanson, Judith E.; Hennekam, Raoul C. M.; Biesecker, Leslie G.

    2012-01-01

    In 2005, the authors of this article formed an international working group to develop standardized definitions and terms to describe the physical variations used in human phenotypic analyses. This project, which came to be known as the Elements of Morphology, resulted in six articles proposing

  5. The Kings River Sustainable Forest Ecosystems Project: inception, objectives, and progress

    Science.gov (United States)

    Jared Verner; Mark T. Smith

    2002-01-01

    The Kings River Sustainable Forest Ecosystems Project, a formal administrative study involving extensive and intensive collaboration between Forest Service managers and researchers, is a response to changes in the agency’s orientation in favor of ecosystem approaches and to recent concern over issues associated with maintenance of late successional forest attributes...

  6. Projecting future air pollution-related mortality under a changing climate: progress, uncertainties and research needs.

    Science.gov (United States)

    Madaniyazi, Lina; Guo, Yuming; Yu, Weiwei; Tong, Shilu

    2015-02-01

    Climate change may affect mortality associated with air pollutants, especially for fine particulate matter (PM2.5) and ozone (O3). Projection studies of such kind involve complicated modelling approaches with uncertainties. We conducted a systematic review of researches and methods for projecting future PM2.5-/O3-related mortality to identify the uncertainties and optimal approaches for handling uncertainty. A literature search was conducted in October 2013, using the electronic databases: PubMed, Scopus, ScienceDirect, ProQuest, and Web of Science. The search was limited to peer-reviewed journal articles published in English from January 1980 to September 2013. Fifteen studies fulfilled the inclusion criteria. Most studies reported that an increase of climate change-induced PM2.5 and O3 may result in an increase in mortality. However, little research has been conducted in developing countries with high emissions and dense populations. Additionally, health effects induced by PM2.5 may dominate compared to those caused by O3, but projection studies of PM2.5-related mortality are fewer than those of O3-related mortality. There is a considerable variation in approaches of scenario-based projection researches, which makes it difficult to compare results. Multiple scenarios, models and downscaling methods have been used to reduce uncertainties. However, few studies have discussed what the main source of uncertainties is and which uncertainty could be most effectively reduced. Projecting air pollution-related mortality requires a systematic consideration of assumptions and uncertainties, which will significantly aid policymakers in efforts to manage potential impacts of PM2.5 and O3 on mortality in the context of climate change. Crown Copyright © 2014. Published by Elsevier Ltd. All rights reserved.

  7. Storage properties of irradiated potatoes and onions. Part of a coordinated programme on the Asian Regional Cooperative Project on Food Irradiation

    International Nuclear Information System (INIS)

    Hayashi, T.

    1984-12-01

    Quality changes with regard to browning of inner buds and sprouting of irradiated onions variety Kitamiki and Ohotsuku were investigated. One ton of each variety was irradiated with either 38.1 or 65.2 Gy at the Commercial Potato Irradiator in Shihoro and stored either at 0 deg. C or 5 deg. C. After 6 months of storage, they were taken out to be stored at room temperature. It was observed that green inner buds developed in most unirradiated onions which showed no external sprouting irrespective of storage temperature. Irradiated onions show no external or internal sprouting but exhibited browning of small inner buds. Unirradiated onions rooted slightly during storage at low temperature. None of the irradiated samples showed rooting. Neither of the samples spoiled significantly during storage. It was concluded that storage at room temperature accelerated sprouting and development of green inner buds of unirradiated onions and browning of small inner buds in irradiated ones. During off-seasons, only irradiated onions stored at low temperatures have qualities of commercial significance

  8. Spanish participation in the Haw Project: Laboratory investigations on Gamma irradiation effects in rock salt

    International Nuclear Information System (INIS)

    Cuevas, C. de las; Miralles, L.; Teixidor, P.; Garcia Veigas, J.; Dies, X.; Ortega, X.; Pueyo, J.J.

    1993-01-01

    In order to prove the safe disposal of high-level radioactive waste (HAW) in salt rock, a five years test disposal of thirty highly radioactive radiation sources is planned in the Asse salt mine, in the Federal Republic of Germany. The thirty radiation sources consist of steel canisters containing the vitrified radionuclides Caesium 137 and Strontium 90 in quantities sufficient to cover the bandwidth of heat generation and gamma radiation of real HAW. The radiation sources will be emplaced in six boreholes located in two galleries at the 800 m level. Two electrical heater tests were already started in November 1988 and are continuosly surveyed in respect of the rock mass. Also the handling system necessary for the emplacement of the radioactive canisters was developed and succesfully tested. A laboratory investigation programme on radiation effects in salt is being performed in advance to the radioactive canister emplacement. This programme includes the investigation of thermally and radiolytically induced water and gas release from the rock salt and the radiolytical decomposition of salt minerals. Part of this programme has been carried out since 1988 at the University of Barcelona, basically what refers to colloidal sodium determinations by light absorption measurements and microstructural studies on irradiated salt samples. For gamma dose and dose rate measurements in the test field, measuring systems consisting of ionisation chambers as well as solid state dosemeters were developed and tested. Thermomechanical computer code validation is performed by calculational predictions and parallel investigation of the stress and displacement fields in the underground test field

  9. Extreme project. Progress report 2006; Projet EXTREME. Rapport d'avancement 2006

    Energy Technology Data Exchange (ETDEWEB)

    Eyrolle, F.; Masson, O.; Charmasson, S

    2007-07-01

    The E.X.T.R.E.M.E. project introduced in 2005 to the S.E.S.U.R.E. / L.E.R.C.M. has for objectives to acquire data on the consequences of the extreme climatic meteorological episodes on the distribution of the artificial radioisotopes within the various compartments of the geosphere. This report presents the synthesis of the actions developed in 2006 in positioning and in co financing of the project by means of regional or national research programs (C.A.R.M.A., E.X.T.R.E.M.A., E.C.C.O.R.E.V.I.), of data acquisition, valuation and scientific collaboration. (N.C.)

  10. Explosives disposal demonstration projects. Progress report, April 12, 1995--June 30, 1995

    International Nuclear Information System (INIS)

    Charbeneau, R.

    1995-01-01

    This report contains quarterly reports on two projects. The first is undertaking the environmental restoration at the Pantex Plant. Research objectives are organized under four general tasks: field testing and produced water treatment, bioremediation of contaminated groundwater and soils, vadose zone remediation, and chromium remediation. The other project goal is to demonstrate generation of diamond by explosive compression of Carbon 60 and Carbon 70 and mixtures of these fullerenes. The intent is to exploit expertise developed by Pantex and other DOE Laboratories in the area of understanding and modeling of explosive compression for initiation of nuclear fission reactions to explosively compress carbon in the form of fullerenes with the goal of transforming the material into the diamond phase

  11. Progress of the Enhanced Hanford Single Shell Tank (SST) Integrity Project

    Energy Technology Data Exchange (ETDEWEB)

    Venetz, Theodore J. [Washington River Protection Solutions, Richland, WA (United States); Washenfelder, Dennis J. [Washington River Protection Solutions, Richland, WA (United States); Boomer, Kayle D. [Washington River Protection Solutions, Richland, WA (United States); Johnson, Jeremy M. [USDOE Office of River Protection, Richland, WA (United States); Castleberry, Jim L. [Washington River Protection Solutions, Richland, WA (United States)

    2015-01-07

    To improve the understanding of the single-shell tanks (SSTs) integrity, Washington River Protection Solutions, LLC (WRPS), the USDOE Hanford Site tank contractor, developed an enhanced Single-Shell Tank Integrity Project (SSTIP) in 2009. An expert panel on SST integrity, consisting of various subject matters experts in industry and academia, was created to provide recommendations supporting the development of the project. This panel developed 33 recommendations in four main areas of interest: structural integrity, liner degradation, leak integrity and prevention, and mitigation of contamination migration. In late 2010, seventeen of these recommendations were used to develop the basis for the M-45-10-1 Change Package for the Hanford Federal Agreement and Compliance Order, which is also known as the Tri-Party Agreement.

  12. Recent progress in flow control for practical flows results of the STADYWICO and IMESCON projects

    CERN Document Server

    Barakos, George; Luczak, Marcin

    2017-01-01

    This book explores the outcomes on flow control research activities carried out within the framework of two EU-funded projects focused on training-through-research of Marie Sklodowska-Curie doctoral students. The main goal of the projects described in this monograph is to assess the potential of the passive- and active-flow control methods for reduction of fuel consumption by a helicopter. The research scope encompasses the fields of structural dynamics, fluid flow dynamics, and actuators with control. Research featured in this volume demonstrates an experimental and numerical approach with a strong emphasis on the verification and validation of numerical models. The book is ideal for engineers, students, and researchers interested in the multidisciplinary field of flow control. Provides highly relevant and up-to-date information on the topic of flow control; Includes assessments of a wide range of flow-control technologies and application examples for fixed and rotary-wing configurations; Reinforces reader u...

  13. Statement on current progress of the EPR project. Basic Design phase concluded

    International Nuclear Information System (INIS)

    Lamprecht, F.

    1997-01-01

    Against the background of expected increasing demand for electric power worldwide it is obvious that any existing technology for electricity generation will be required in the future to meet the demand, just as well as technology improvements. Nuclear industry's answer to this challenge are activities for further evolution of the PWR concept as a joint venture of France and Germany for development of the European Pressurized Water Reactor (EPR). The project participants are reactor manufacturers and operators of both countries as well as organisations responsible for reactor safety. The Basic Design phase which started in 1995, after prior definition of the common safety philosophy, has recently been concluded. The results have been presented at a meeting in October 1997 in Cologne, organised by KTG and SFEN, the countries' respective nuclear societies. The broad statement is that project work was successful in achieving two major objectives: A well-balanced safety concept, and a competitive design. (orig./CB) [de

  14. Progress Report

    DEFF Research Database (Denmark)

    Duer, Karsten

    1999-01-01

    Progress report describing the work carried out by the Danish participant in the ALTSET project in the period January 1999 to July 1999.......Progress report describing the work carried out by the Danish participant in the ALTSET project in the period January 1999 to July 1999....

  15. Final Progress Report for Project Entitled: Quantum Dot Tracers for Use in Engineered Geothermal Systems

    Energy Technology Data Exchange (ETDEWEB)

    Rose, Peter [Univ. of Utah, Salt Lake City, UT (United States); Bartl, Michael [Univ. of Utah, Salt Lake City, UT (United States); Reimus, Paul [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Williams, Mark [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Mella, Mike [Univ. of Utah, Salt Lake City, UT (United States)

    2015-09-12

    The objective of this project was to develop and demonstrate a new class of tracers that offer great promise for use in characterizing fracture networks in EGS reservoirs. From laboratory synthesis and testing through numerical modeling and field demonstrations, we have demonstrated the amazing versatility and applicability of quantum dot tracers. This report summarizes the results of four years of research into the design, synthesis, and characterization of semiconductor nanocrystals (quantum dots) for use as geothermal tracers.

  16. General-purpose heat source project and space nuclear safety and fuels program. Progress report

    International Nuclear Information System (INIS)

    Maraman, W.J.

    1979-12-01

    This formal monthly report covers the studies related to the use of 238 PuO 2 in radioisotopic power systems carried out for the Advanced Nuclear Systems and Projects Division of the Los Alamos Scientific Laboratory. The two programs involved are general-purpose heat source development and space nuclear safety and fuels. Most of the studies discussed hear are of a continuing nature. Results and conclusions described may change as the work continues

  17. Observational studies in South African mines to mitigate seismic risks: a mid-project progress report

    CSIR Research Space (South Africa)

    Durrheim, RJ

    2013-10-01

    Full Text Available such as Japan. A 5-year collaborative project entitled "Observational studies in South African mines to mitigate seismic risks" was launched in 2010 to address these risks, drawing on over a century of South African and Japanese research experience... network in the mining districts. Figure 1. Schematic illustration of the research design. Jpn - Japanese researchers; CSIR - Council for Scientific and Industrial Research; CGS - Council for Geoscience The knowledge gained during the course...

  18. The Agricultural Model Intercomparison and Improvement Project (AgMIP): Overview and Progress

    Science.gov (United States)

    Rosenzweig, C.; Hatfield, J.; Jones, J. W.; Ruane, A. C.

    2012-12-01

    The Agricultural Model Intercomparison and Improvement Project (AgMIP) is an international effort to assess the state of global agricultural modeling and to understand climate impacts on the agricultural sector. AgMIP connects the climate science, crop modeling, and agricultural economic modeling communities to generate probabilistic projections of current and future climate impacts. The goals of AgMIP are to improve substantially the characterization of risk of hunger and world food security due to climate change and to enhance adaptation capacity in both developing and developed countries. This presentation will describe the general approach of AgMIP and highlight its findings and activities. AgMIP crop model intercomparisons have been established for wheat (27 models participating), maize (25 models), and rice (15+ models), and are being established for sugarcane, soybean, sorghum/millet, and peanut. In coordination with these pilots, methodologies to utilize weather generators and downscaled climate simulations for agricultural applications are under development. An AgMIP global agricultural economics model intercomparison with participation of 11 international groups is ongoing, and a number of global biophysical models are currently being evaluated for future climate impacts on agricultural lands both as part of the Inter-Sectoral Impact Model Intercomparison Project (ISI-MIP) and for contribution to the IPCC Fifth Assessment Report (AR5). AgMIP is also organizing regional research efforts, and has already held workshops in South America, Sub-Saharan Africa, South Asia, Europe, and North America. Outcomes from these meetings have informed AgMIP activities, and 10 research teams from Sub-Saharan Africa and South Asia have been selected for project funding. Additional activities are planned for Australia and East Asia. As the AgMIP research community continues to work towards its goals, three key cross-cutting scientific challenges have emerged and are being

  19. Evaluation and monitoring of wild/natural steelhead trout production: project progress report, 1996; ANNUAL

    International Nuclear Information System (INIS)

    Leth, Brian D.; Holubetz, Terry; Nemeth, Doug

    2000-01-01

    This project was initiated to provide additional, and more definitive, information regarding wild steelhead Oncorhynchus mykiss populations in Idaho. Important streams for wild steelhead production were identified and selected for monitoring. Monitoring activities employed among streams varied, but generally included: aerial redd counts, placement of adult weirs, enumeration of juveniles through mask and snorkel counts, and emigrant trapping. This report details activities during the 1996 field season

  20. Monitoring the progress of NFFO-3 projects: short rotation willow coppice - agronomy and economics

    International Nuclear Information System (INIS)

    Twemlow, R.K.M.

    1997-01-01

    The involvement of Sidney C. Banks p.l.c., and the subsidiary company Banks Agriculture, in fuel supply for biofuelled power stations started some 4 years ago. When identifying possible opportunities and crops it was apparent that, with the third tranche of Non-Fossil Fuel Obligations (NFFO3) coming up, there were companies looking at developing biofuelled power stations, using Short Rotation Coppice (SRC) and for this they needed to link with potential fuel suppliers. Sidney C. Banks p.l.c. linked with South Western Power (SWP) (a subsidiary of South Western Electricity p.l.c. (SWEB)) to act as their sole fuel supplier on projected biofuel wood power stations. Subsequently two wood fuelled power stations were awarded to SWP and Sidney C. Banks p.l.c. in the 3rd Tranche from NFFO, in December 1994. The objectives of this project were to: establish a network of SRC growers to produce fuel for a NFFO project; monitor the success of the enterprise; implement a programme of constant improvement to optimise the fuel supply strategy; and provide valuable information as to the performance of the SRC crop in large scale commercial production. (author)

  1. Progress on the Femto-Slicing Project at the Synchrotron SOLEIL

    International Nuclear Information System (INIS)

    Prigent, P; Hollander, Ph; Labat, M; Couprie, M E; Marlats, J L; Laulhé, C; Luning, J; Moreno, T; Morin, P; Nadji, A; Polack, F; Ravy, S; Silly, M; Sirotti, F

    2013-01-01

    The aim of the Femto-Slicing project at SOLEIL is to generate 100 fs X-rays pulses on two beamlines, CRISTAL and TEMPO, for pump-probe experiments in the hard and soft X-rays regions. Two fs lasers are currently in operation on TEMPO and CRISTAL for pump-probe experiments on the ps time scale enabling time resolved photoemission and photodiffraction studies. The Femto-Slicing project is based on the fs laser of the CRISTAL beamline, which can be adjusted to deliver 3 mJ pulses of 30 fs duration at 2.5 kHz. The laser beam will be separated in three branches: one delivering about 2 mJ to the modulator Wiggler and the other ones delivering the remaining energy to the TEMPO and CRISTAL experiments. This layout will yield natural synchronization between IR laser pump and X-ray probe pulses, only affected by jitter associated with beam transport. In this paper, we present the current status of the Femto-Slicing project at SOLEIL, with particular emphasis on the expected performance, and the design and construction of the laser beam transport and the diagnostics implementation.

  2. Progress report on decommissioning activities at the Fernald Environmental Management Project (FEMP) site

    International Nuclear Information System (INIS)

    1998-01-01

    The Fernald Environmental Management Project (FEMP), is located about 18 miles northwest of Cincinnati, Ohio. Between 1953 and 1989, the facility, then called the Feed Material Production Center or FMPC, produced uranium metal products used in the eventual production of weapons grade material for use by other US Department of Energy (DOE) sites. In 1989, FMPC's production was suspended by the federal government in order to focus resources on environmental restoration versus defense production. In 1992, Fluor Daniel Fernald assumed responsibility for managing all cleanup activities at the FEMP under contract to the DOE. In 1990, as part of the remediation effort, the site was divided into five operable units based on physical proximity of contaminated areas, similar amounts of types of contamination, or the potential for a similar technology to be used in cleanup activities. This report continues the outline of the decontamination and decommissioning (D and D) activities at the FEMP site Operable Unit 3 (OU3) and provides an update on the status of the decommissioning activities. OU3, the Facilities Closure and Demolition Project, involves the remediation of more than 200 uranium processing facilities. The mission of the project is to remove nuclear materials stored in these buildings, then perform the clean out of the buildings and equipment, and decontaminate and dismantle the facilities

  3. UK Safeguards R and D Project progress report for the period May 1987 -April 1988

    International Nuclear Information System (INIS)

    Packer, T.W.

    1988-09-01

    The main categories of task included in the United Kingdom safeguards research and development programme are summarised in the first section. These are: tasks concerned with the development of instruments and techniques for reprocessing and centrifuge enrichment plant safeguards; tasks concerned with the development of instruments and techniques for general application in the field of safeguards; tasks which are services to the International Atomic Energy Authority and exploratory and short term tasks which occur from time to time. The next three sections contain progress reports on the individual tasks and section 6 lists reports and papers relevant to work on UK safeguards research and development published between May 1987 and April 1988. (U.K.)

  4. The Text of the Agreement of 8 July Extending the Asian Regional Co-Operative Project on Food Irradiation. Extension Agreement

    International Nuclear Information System (INIS)

    1983-12-01

    The text of the Agreement to Extend the Agreement of 23 May 1980 Establishing the Asian Regional Co-operative Project on Food Irradiation within the framework of the Regional Co-operative Agreement for Research, Development and Training Related to Nuclear Science and Technology of 1972, as extended in 1977 and in 1982, is reproduced herein for the information of all Members

  5. On the progress of a water calorimeter project for the verification of radiotherapy dosimetry

    International Nuclear Information System (INIS)

    Medin, J.; Andreo, P.; Ross, C.K.; Klassen, N.K.; Grindborg, J.E.

    2002-01-01

    A sealed water calorimeter has been constructed at the department of radiation physics in Malmoe, Sweden with support from the Swedish Radiation Protection Authority. The calorimeter follows the design of the NRC sealed water calorimeter. The temperature increase during irradiation is measured with two thermistor probes in the centre of a sealed cylindrical glass vessel. The sealed glass vessel contains high purity water and is positioned in a large water phantom to measure the absorbed dose to water. In the present design, the water phantom is thermally isolated from the environment and operated at 4 deg. C to reduce the problem associated with convective heat transfer. The thermal isolation is achieved by enclosing the water phantom in a wooden box (92x92x85 cm 3 ) lined with 6 cm of Styrofoam. The temperature in the wooden box is kept at 4 deg. C by circulating air, cooled when passing a heat exchanger coupled to a thermostated bath. Since a detailed knowledge of the absolute temperature is not required for calorimetry, the main requirement is that the two thermistor probes accurately measure temperature changes. The thermistor probes are calibrated against platinum resistance probes, traceable to the Swedish national temperature standard. When preparing for measurements, the glass vessel is first filled with high purity water and then bubbled with N 2 gas for one to two hours. After the gas bubbling, the position of the thermistor probes is adjusted and the glass vessel is suspended in the water phantom. The probes are connected to a four-arm AC bridge, where two of the other arms consist of high precision resistors (10kΩ each), and the third arm includes a decade resistor box for balancing the bridge. The output voltage is measured with a commercial lock-in amplifier. Platinum resistor probes, used to monitor the temperature in the water phantom and in the air volume inside the wooden box, are connected to a Keithley 2001 multimeter equipped with a scanner

  6. Post Irradiation Examination Plan for High-Burnup Demonstration Project Sister Rods

    Energy Technology Data Exchange (ETDEWEB)

    Scaglione, John M [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Montgomery, Rose [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bevard, Bruce Balkcom [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-04-01

    This test plan describes the experimental work to be implemented by the U.S. Department of Energy (DOE) Office of Nuclear Energy (NE) to characterize high burnup (HBU) spent nuclear fuel (SNF) in conjunction with the High Burnup Dry Storage Cask Research and Development Project and serves to coordinate and integrate the multi-year experimental program to collect and develop data regarding the continued storage and eventual transport of HBU (i.e., >45 GWd/MTU) SNF. The work scope involves the development, performance, technical integration, and oversight of measurements and collection of relevant data, guided by analyses and demonstration of need.

  7. The Walla Walla Basin Natural Production Monitoring and Evaluation Project : Progress Report, 1999-2002.

    Energy Technology Data Exchange (ETDEWEB)

    Contor, Craig R.; Sexton, Amy D.

    2003-06-02

    The Walla Walla Basin Natural Production Monitoring and Evaluation Project (WWNPME) was funded by Bonneville Power Administration (BPA) as directed by section 4(h) of the Pacific Northwest Electric Power Planning and Conservation Act of 1980 (P. L. 96-501). This project is in accordance with and pursuant to measures 4.2A, 4.3C.1, 7.1A.2, 7.1C.3, 7.1C.4 and 7.1D.2 of the Northwest Power Planning Council's (NPPC) Columbia River Basin Fish and Wildlife Program (NPPC 1994). Work was conducted by the Fisheries Program of the Confederated Tribes of the Umatilla Indian Reservation (CTUIR) under the Walla Walla Basin Natural Production Monitoring and Evaluation Project (WWNPME). Chapter One provides an overview of the entire report and how the objectives of each statement of work from 1999, 2000, 2001, and 2002 contract years are organized and reported. Chapter One also provides background information relevant to the aquatic resources of the Walla Walla River Basin. Objectives are outlined below for the statements of work for the 1999, 2000, 2001 and 2002 contract years. The same objectives were sometimes given different numbers in different years. Because this document is a synthesis of four years of reporting, we gave objectives letter designations and listed the objective number associated with the statement of work for each year. Some objectives were in all four work statements, while other objectives were in only one or two work statements. Each objective is discussed in a chapter. The chapter that reports activities and findings of each objective are listed with the objective below. Because data is often interrelated, aspects of some findings may be reported or discussed in more than one chapter. Specifics related to tasks, approaches, methods, results and discussion are addressed in the individual chapters.

  8. The Progress of the HIRFL-CSR Project and the Commissioning of the Cluster Target

    International Nuclear Information System (INIS)

    Cai Xiaohong; Lu Rongchun; Shao Caojie; Ruan, Fangfang; Yu, Deyang; Li Mingsheng; Torpokov, D K; Shestakov, Yu V; Sadykov, Rs; Zevakov, S A; Xia Jiawen; Zhan Wenlong

    2007-01-01

    HIRFL-CSR, a new cooler-storage-ring project, is the post-acceleration system of the Heavy Ion Research Facility in Lanzhou (HIRFL) consisting of a main ring (CSRm) and an experimental ring (CSRe). The construction of the HIRFL-CSR complex is nearing completion. The stored beam in the CSRm has been observed. Recently, the stored beam was accelerated from 7 MeV/u to 30 MeV/u. The cluster target is located in one straight section of the CSRe providing cluster jet targets of inert gases and small molecular gases. The cluster target has been finished and the results of the test running are presented

  9. Bill project introducing a progressive price fixing of energy - Nr 150

    International Nuclear Information System (INIS)

    Brottes, Francois; Le Roux, Bruno

    2012-01-01

    This bill project aims at speeding up energy transition by inciting households to reduce their consumption, and at accompanying the unavoidable increase of energy prices. It introduces a rather complex process to establish the energy tariff, and notably a bonus-malus principle. The objective is to incite households to better insulate their main housing. It also takes social tariffs into account, defines institutions and representative for energy regulation, proposes the implementation of a public service for housing energy performance, and addresses the issue of energy supply in winter to households in precarious situation

  10. Blind test results - measure of incessant progress in personnel monitoring services at Kudankulam Nuclear Power Project

    International Nuclear Information System (INIS)

    Jashi, K.B.; Ashok Kumar, A.; Pandaram, P.

    2018-01-01

    Personnel Monitoring Services (PMS) at Thermoluminescent Dosimeter (TLD) laboratory, Kudankulam Nuclear Power Project (KKNPP) involve monitoring of about 1500 radiation workers of KKNPP for external radiation exposure on monthly basis. Quality assurance in PMS provides an overall estimate of accuracy which depends not only upon the dosimeter quality and reader performance but also on data interpretation, applicable software and the system. Therefore it measures the effectiveness of quality control mechanism. Blind test is an effective tool to check the performance of the processor without their knowledge during routine processing of the service cards

  11. General-purpose heat source project and space nuclear safety fuels program. Progress report, February 1980

    International Nuclear Information System (INIS)

    Maraman, W.J.

    1980-05-01

    This formal monthly report covers the studies related to the use of 238 PuO 2 in radioisotopic power systems carried out for the Advanced Nuclear Systems and Projects Division of the Los Alamos Scientific Laboratory. The two programs involved are: General-Purpose Heat Source Development and Space Nuclear Safety and Fuels. Most of the studies discussed here are of a continuing nature. Results and conclusions described may change as the work continues. Published reference to the results cited in this report should not be made without the explicit permission of the person in charge of the work

  12. Retrieval process development and enhancements project Fiscal year 1995: Simulant development technology task progress report

    International Nuclear Information System (INIS)

    Golcar, G.R.; Bontha, J.R.; Darab, J.G.

    1997-01-01

    The mission of the Retrieval Process Development and Enhancements (RPD ampersand E) project is to develop an understanding of retrieval processes, including emerging and existing technologies, gather data on these technologies, and relate the data to specific tank problems such that end-users have the requisite technical bases to make retrieval and closure decisions. The development of waste simulants is an integral part of this effort. The work of the RPD ampersand E simulant-development task is described in this document. The key FY95 accomplishments of the RPD ampersand E simulant-development task are summarized below

  13. History and progress of the North American Soil Geochemical Landscapes Project, 2001-2010

    Science.gov (United States)

    Smith, David B.; Cannon, William F.; Woodruff, Laurel G.; Rivera, Francisco Moreira; Rencz, Andrew N.; Garrett, Robert G.

    2012-01-01

    In 2007, the U.S. Geological Survey, the Geological Survey of Canada, and the Mexican Geological Survey initiated a low-density (1 site per 1600 km2, 13323 sites) geochemical and mineralogical survey of North American soils (North American Soil Geochemical Landscapes Project). Sampling and analytical protocols were developed at a series of workshops in 20032004 and pilot studies were conducted from 20042007. The ideal sampling protocol at each site includes a sample from 05 cm depth, a composite of the soil A horizon, and a sample from the soil C horizon. The 3, HClO4, and HF. Separate methods are used for As, Hg, Se, and total C on this same size fraction. The major mineralogical components are determined by a quantitative X-ray diffraction method. Sampling in the conterminous U.S. was completed in 2010 (c. 4800 sites) with chemical and mineralogical analysis currently underway. In Mexico, approximately 66% of the sampling (871 sites) had been done by the end of 2010 with completion expected in 2012. After completing sampling in the Maritime provinces and portions of other provinces (472 sites, 7.6% of the total), Canada withdrew from the project in 2010. Preliminary results for a swath from the central U.S. to Florida clearly show the effects of soil parent material and climate on the chemical and mineralogical composition of soils. A sample archive will be established and made available for future investigations.

  14. Synchrotron topography project. Progress report, January 20, 1982-October 20, 1982

    International Nuclear Information System (INIS)

    Bilello, J.C.; Chen, H.; Hmelo, A.B.; Liu, J.M.; Birnbaum, H.K.; Herley, P.J.; Green, R.E. Jr.

    1982-01-01

    The collaborators have participated in the Synchrotron Topography Project (STP) which has designed and developed instrumentation for an x-ray topography station at the National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory (BNL). The two principle instruments constructed consist of a White Beam Camera (WBC) and a Multiple Crystal Camera (MCC) with high planar collimation and wide area image coverage. It is possible to perform in-situ studies in a versatile environmental chamber equipped with a miniature mechanical testing stage for both the WBC and MCC systems. Real-time video imaging plus a rapid feed cassette holder for high resolution photographic plates are available for recording topographs. Provisions are made for other types of photon detection as well as spectroscopy. The facilities for the entire station have been designed for remote operation using a LSI-11/23 plus suitable interfacing. These instruments will be described briefly and the current status of the program will be reviewed. The Appendix of this report presents titles, authors and abstracts of other technical work associated with this project during the current period

  15. Mexico City air quality: Progress of an international collaborative project to define air quality management options

    International Nuclear Information System (INIS)

    Streit, G.E.

    1992-01-01

    Mexico City, faces a severe air pollution problem due to a combination of circumstances. The city is in a high mountain basin at a subtropical latitude. The basin setting inhibits dispersion of pollution and contributes to frequent wintertime thermal inversions which further trap pollutants near the surface. The elevation and latitude combine to provide plentiful sunshine which, in comparison to more northern latitudes, is enhanced in the UV radiation which drives atmospheric photochemistry to produce secondary pollutants such as ozone. The Area Metropolitana de la Ciudad de Mexico AMCW is defined to include the 16 delegations of the Federal District (D.F.) and 17 highly urbanized municipalities in the State of Mexico which border the D.F. The 1990 census (XI Censo General de Poblacion y Vivienda de 1990) records that slightly over 15 million people live in the AMCM. There are numerous other nearby communities which are in the airshed region of Mexico City, but which are not included in the definition and population of the AMCM. The Mexico City Air Quality Research Initiative is one project that is examining the complex relationship between air pollution, economic growth, societal values, and air quality management policies. The project utilizes a systems approach including computer modeling, comprehensive measurement studies of Mexico City's air pollutants, environmental chemical reaction studies and socioeconomic analysis. Los Alamos National Laboratory (USA) and the Mexican Petroleum Institute are the designated lead institutions

  16. UP2 400 High Activity Oxide Legacy Waste Retrieval Project Scope and Progress-13048

    Energy Technology Data Exchange (ETDEWEB)

    Chabeuf, Jean-Michel; Varet, Thierry [AREVA Site Value Development Business Unit, La Hague Site (France)

    2013-07-01

    The High Activity Oxide facility (HAO) reprocessed sheared and dissolved 4500 metric tons of light water reactor fuel the fuel of the emerging light water reactor spent fuel between 1976 and 1998. Over the period, approximately 2200 tons of process waste, composed primarily of sheared hulls, was produced and stored in a vast silo in the first place, and in canisters stored in pools in subsequent years. Upon shutdown of the facility, AREVA D and D Division in La Hague launched a thorough investigation and characterization of the silos and pools content, which then served as input data for the definition of a legacy waste retrieval and reconditioning program. Basic design was conducted between 2005 and 2007, and was followed by an optimization phase which lead to the definition of a final scenario and budget, 12% under the initial estimates. The scenario planned for the construction of a retrieval and reconditioning cell to be built on top of the storage silo. The retrieved waste would then be rinsed and sorted, so that hulls could subsequently be sent to La Hague high activity compacting facility, while resins and sludge would be cemented within the retrieval cell. Detailed design was conducted successfully from 2008 until 2011, while a thorough research and development program was conducted in order to qualify each stage of the retrieval and reconditioning process, and assist in the elaboration of the final waste package specification. This R and D program was defined and conducted as a response and mitigation of the major project risks identified during the basic design process. Procurement and site preparatory works were then launched in 2011. By the end of 2012, R and D is nearly completed, the retrieval and reconditioning process have been secured, the final waste package specification is being completed, the first equipment for the retrieval cell is being delivered on site, while preparation works are allowing to free up space above and around the silo, to

  17. Captive Rearing Program for Salmon River Chinook Salmon : Project Progress Report, 2001 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Venditti, David A.

    2003-10-01

    distributed themselves throughout the study section and displayed a progression of habitat associations and behavior consistent with progressing maturation and the onset of spawning. Five of the 18 redds spawned by captive-reared parents were hydraulically sampled to assess survival to the eyed stage of development. Eyed-eggs were collected from four of these, and survival to this stage ranged from 0%-89%. Expanding these results to the remaining redds produced an estimate of 15,000 eyed-eggs being produced by captive-reared fish.

  18. Overview of the Last Progresses for the European Test Blanket Modules Projects

    International Nuclear Information System (INIS)

    Salavy, J.-F.; Rampal, G.; Boccaccini, L.V.; Meyder, R.; Neuberger, H.; Laesser, R.; Poitevin, Y.; Zmitko, M.; Rigal, E.

    2006-01-01

    The long-term objective of the EU Breeding Blankets programme is the development of DEMO breeding blankets, which shall assure tritium self-sufficiency, an economically attractive use of the heat produced inside the blankets for electricity generation and a sufficiently high shielding of the superconducting magnets for long time operation. In the short-term so-called DEMO relevant Test Blanket Modules (TBMs) of these breeder blanket concepts shall be designed, manufactured, tested, installed, commissioned and operated in ITER for first tests in a fusion environment. The Helium Cooled Lithium-Lead (HCLL) breeder blanket and the Helium Cooled Pebble Bed (HCPB) concepts are the two breeder blanket lines presently developed by the EU. The main objective of the EU test strategy related to TBMs in ITER is to provide the necessary information for the design and fabrication of breeding blankets for a future DEMO reactor. EU TBMs shall therefore use the same structural and functional materials, apply similar fabrication technologies, and test adequate processes and components. This paper gives an overview of the last progresses in terms of system design, calculations, test program, safety and R-and-D done these last two years in order to cope with the ambitious objective to introduce two EU TBM systems for day-1 of ITER operation. The engineering design of the two systems is mostly concluded and the priority is now on the development and qualification of the fabrication technologies. From calculations point of view, the last modelling efforts related to the thermal-hydraulic of the first wall, the tritium behaviour, and the box thermal and mechanical resistance in accidental conditions are presented. Last features of the TBM and cooling system designs and integration in ITER reactor are highlighted. In particular, this paper also describes the safety and licensing analyses performed for each concept to be able to include the TBM systems in the ITER preliminary safety report

  19. Captive Rearing Program for Salmon River Chinook Salmon, 2000 Project Progress Report.

    Energy Technology Data Exchange (ETDEWEB)

    Venditti, David A.

    2002-04-01

    During 2000, the Idaho Department of Fish and Game (IDFG) continued to develop techniques to rear chinook salmon Oncorhynchus tshawytscha to sexual maturity in captivity and to monitor their reproductive performance under natural conditions. Eyed-eggs were collected to establish captive cohorts from three study streams and included 503 eyed-eggs from East Fork Salmon River (EFSR), 250 from the Yankee Fork Salmon River, and 304 from the West Fork Yankee Fork Salmon River (WFYF). After collection, the eyed-eggs were immediately transferred to the Eagle Fish Hatchery, where they were incubated and reared by family group. Juveniles collected the previous summer were PIT and elastomer tagged and vaccinated against vibrio Vibrio spp. and bacterial kidney disease before the majority (approximately 75%) were transferred to the National Marine Fisheries Service, Manchester Marine Experimental Station for saltwater rearing through sexual maturity. Smolt transfers included 158 individuals from the Lemhi River (LEM), 193 from the WFYF, and 372 from the EFSR. Maturing fish transfers from the Manchester facility to the Eagle Fish Hatchery included 77 individuals from the LEM, 45 from the WFYF, and 11 from the EFSR. Two mature females from the WFYF were spawned in captivity with four males in 2000. Only one of the females produced viable eggs (N = 1,266), which were placed in in-stream incubators by personnel from the Shoshone-Bannock Tribe. Mature adults (N = 70) from the Lemhi River were released into Big Springs Creek to evaluate their reproductive performance. After release, fish distributed themselves throughout the study section and displayed a progression of habitat associations and behavior consistent with progressing maturation and the onset of spawning. Fifteen of the 17 suspected redds spawned by captive-reared parents in Big Springs Creek were hydraulically sampled to assess survival to the eyed stage of development. Eyed-eggs were collected from 13 of these, and

  20. Progress report of the S.E.N.S.I.B. project 2005-2008

    International Nuclear Information System (INIS)

    Baumont, G.; Bourcier, L.; Briand, B.; Chojnacki, E.; Dufeu, A.; Duffa, C.; Durand, V.; Eyrolle, F.; Larue, C.; Levain, A.; Masson, O.; Mercat, C.; Metivier, J.M.; Pey, B.; Pourcelot, L.; Renaud, Ph.; Roussel-Debet, S.; Thebault, H.

    2008-01-01

    The aim of the project is to define a method for classifying territories by their sensitivity to a radioactive pollution, on the basis of their environmental and social characteristics, i.e. those characteristics associated with the human use of the environment. For example, the sensitivity of an urban environment will depend on the population density, the area covered, the urban services and their response to the contamination. The sensitivity of an agricultural area will be determined by the food chain and the way in which it is affected by contamination of the soil, crops or livestock. The end result of the S.E.N.S.I.B. project will be a standardised tool capable of representing and comparing the sensitivity of an area to radioactive pollution using a single measurement scale. This standardized measurement of the environmental and population characteristics will be useful in risk assessment and management, and in all the operational stages of a nuclear installation including commissioning, normal operation, accident and post-accident situations, and during decommissioning. The project will provide mappings of the sensitivity to a range of concrete scenarios, and of the vulnerability of each area once the probability of pollution occurring has been taken into account. The concept of sensitivity is shared by other fields besides radioecology and can be used to assess vulnerability to chemical pollution, climate change, or population pressures. The results obtained from the S.E.N.S.I.B. project will be applicable to other fields, especially that of chemical pollution, though a range of collaborations and partnerships. The S.E.N.S.I.B. project is divided into five stages. These are: Identification of sensitivity factors, i.e. all the characteristics of a territory likely to make the environment sensitive to a given type of pollution. Characterization of their ranges of values. Conversion of each range of values into a range of scores. Allocation of a weighting to be

  1. Sulforaphane enhances irradiation effects in terms of perturbed cell cycle progression and increased DNA damage in pancreatic cancer cells.

    Directory of Open Access Journals (Sweden)

    Patrick Naumann

    Full Text Available Sulforaphane (SFN, an herbal isothiocyanate enriched in cruciferous vegetables like broccoli and cauliflower, has gained popularity for its antitumor effects in cell lines such as pancreatic cancer. Antiproliferative as well as radiosensitizing properties were reported for head and neck cancer but little is known about its effects in pancreatic cancer cells in combination with irradiation (RT.In four established pancreatic cancer cell lines we investigated clonogenic survival, analyzed cell cycle distribution and compared DNA damage via flow cytometry and western blot after treatment with SFN and RT.Both SFN and RT show a strong and dose dependent survival reduction in clonogenic assays, an induction of a G2/M cell cycle arrest and an increase in γH2AX protein level indicating DNA damage. Effects were more pronounced in combined treatment and both cell cycle perturbation and DNA damage persisted for a longer period than after SFN or RT alone. Moreover, SFN induced a loss of DNA repair proteins Ku 70, Ku 80 and XRCC4.Our results suggest that combination of SFN and RT exerts a more distinct DNA damage and growth inhibition than each treatment alone. SFN seems to be a viable option to improve treatment efficacy of chemoradiation with hopefully higher rates of secondary resectability after neoadjuvant treatment for pancreatic cancer.

  2. Repair of DNA treated with γ-irradiation and chemical carcinogens. Progress report, June 1, 1975--January 31, 1976

    International Nuclear Information System (INIS)

    Goldthwait, D.A.

    1976-02-01

    Enzymatic mechanisms of DNA repair are under investigation. From E. coli an endonuclease active on apurinic acid has been separated from endonuclease II active on DNA treated with methylmethane sulfonate, methylnitrosourea, 7-bromomethyl-12-methylbenz[a]anthracene and γ-irradiation. Mutants have been identified for each enzyme. The purification of both enzymes is proceeding and the mechanism of action of endonuclease II which has both an N-glycosidase and a phosphodiester hydrolase activity is under investigation. Evidence demonstrating exonuclease III is an enzyme separate from the apurinic acid endonuclease and endonuclease II has been accumulated but this is still under investigation. Work has been completed on 7-bromomethyl-12-methylbenz[a]anthracene treated DNA as a substrate and is being continued on the inhibitory effects of phorbol ester on endonuclease II. Finally, the properties of an enzyme from calf liver active on depurinated DNA have been compared with those of a comparable enzyme from calf thymus. Evidence that they are isozymes has been found

  3. Effects of recombinant plasmid pEgr-p53 transfected stably in combination with X-irradiation on cell cycle progression and proliferation in human SKOV-3 tumor cells in vitro

    International Nuclear Information System (INIS)

    Dong Lihua; Liu Feng; Li Yanbo; Fu Shibo; Gong Shouliang

    2008-01-01

    Objective: To investigate the effect of recombinant plasmid pEgr-hp53 transfected stably in combination with X-ray irradiation on the cell cycle progression and the proliferation in human SKOV-3 tumor cells. Methods: pEgr-hp53 and pcDNA3.1 packaged with liposome were stably transfected into SKOV-3 cells in vitro. SKOV-3-hp53 and SKOV-3-vect were irradiated with 0, 0.5, 2.0 and 5.0 Gy X-rays, respectively, i.e. 8 experimental groups. The SKOV-3 cell proliferation and the cell cycle progression were measured with flow cytometry and cell growth curve, respectively. Results: Compared with 0 Gy group, the cell counts in SKOV-3- hp53 plus different doses of irradiation groups 2 d after irradiation decreased significantly (P 0 /G 1 cells increased significantly (P 2 /M cells decreased in varying degrees. The cell counts in SKOV-3-hp53 plus irradiation group were significantly lower than those in corresponding SKOV-3-vect plus irradiation group, the cell counts 4-8 d after irradiation with 0.5 Gy, 2 d after 2.0 Gy irradiation and 6 d after 5.0 Gy irradiation decreased significantly (P 0 /G 1 cells increased significantly (P 2 /M cells decreased significantly (P 1 arrest in SKOV-3 cells and inhibits the cell proliferation. Ionizing radiation can activate early growth response-1 (Egr-1) gene promoter and increase the expression of p53 gene, and enhance the inhibition of tumor cell growth. (authors)

  4. Recent progress in volcanism studies: Site characterization activities for the Yucca Mountain site characterization project

    International Nuclear Information System (INIS)

    Crowe, B.M.; Valentine, G.; Morley, R.; Perry, F.V.

    1992-01-01

    Significant progress has been made on volcanism studies over the past calendar year. There are a number of major highlights from this work. Geochronology data have been obtained for the Lathrop Wells center using a range of isotopic, radiogenic, and age-calibrated methods. Initial work is encouraging but still insufficient to resolve the age of the center with confidence. Geologic mapping of the Sleeping Butte volcanic centers was completed and a report issued on the geology and chronology data. Twenty shallow trenches have been constructed in volcanic units of the Lathrop Wells volcanic center. Results of detailed studies of the trenches support a polycyclic eruptive history. New soil data from the trenches continue to support a late Pleistocene or Holocene age for many of the volcanic units at the center. Geochemical data (trace element and isotopic analysis) show that the volcanic units of the Lathrop Wells center cannot be related to one another by fractional crystallization of a single magma batch, supporting a polycyclic model of volcanism. Structural models using existing data are used to evaluate the probability of magmatic disruption of a potential repository. Several permissive models have been developed but none lead to significant differences in calculating the disruption ratio. Work was initiated on the eruptive and subsurface effects of magmatic activity on a repository. (author)

  5. Progress on the superconducting magnet for the time projection chamber experiment (TPC) at PEP

    International Nuclear Information System (INIS)

    Green, M.A.; Eberhard, P.H.; Burns, W.A.

    1980-01-01

    The TPC (Time Projection Chamber) experiment at PEP will have a two meter inside diameter superconducting magnet which creatests a 1.5 T uniform solenoidal field for the TPC. The superconducting magnet coil, cryostat, cooling system, and the TPC gas pressure vessel (which operatests at 11 atm) were designed to be about two thirds of a radiation length thick. As a result, a high current density coil design was chosen. The magnet is cooled by forced flow two phase helium. The TPC magnet is the largest adiabatically stable superconducting magnet built to date. The paper presents the parameters of the TPC thin solenoid and its subsystems. Tests results from the Spring 1980 cryogenic tes are presented. The topics to be dealt with in the paper are cryogenic services and the tests of magnet subsystems such as the folded current leads. Large thin superconducting magnet technology will be important to large detectors to be used on LEP

  6. Rhode Island crystalline repository siting project: Technical progress report, Calendar year 1986

    International Nuclear Information System (INIS)

    Vild, B.

    1987-01-01

    A Nuclear Waste Fund established by the Nuclear Waste Policy Act of 1982 provides financial support to affected states to participate in the high-level radioactive waste repository siting program of the US Department of Energy. In Rhode Island, that function was performed by a multidisciplinary Project Review Team consisting of staff from three State agencies. Members of the Review Team attended several meetings in 1986 to discuss mutual concerns with Federal, State and Tribal officials. Comments were developed on DOE's Draft Area Recommendation Report. Members of the Review Team also testified at a public hearing in Providence on the Draft ARR, and developed and distributed a public information booklet. In May, Secretary of Energy John Herrington announced the suspension of the crystalline repository siting program. The remainder of the year was spent monitoring litigation challenging that decision and pending legislation. Administrative phase-down of the program was essentially complete by the close of the calendar year

  7. Technical progress report: Rhode Island crystalline repository project, calendar year 1985

    International Nuclear Information System (INIS)

    Vild, B.F.

    1985-01-01

    A Nuclear Waste Fund established by the Nuclear Waste Policy Act of 1982 provides financial support to affected states to participate in the high-level radioactive waste repository siting program of the US Department of Energy. In Rhode Island, that function is performed by a multidisciplinary Project Review Team consisting of staff from three State agencies. Members of the Review Team attended several meetings in 1985 to voice their concerns directly to DOE. Written comments were also submitted on draft plans and reports. Among the issues raised were inconsistencies in the geologic and environmental data used to screen potential repository sites, the role of Monitored Retrievable Storage (MRS) in the repository program, and regulations regarding the transportation and storage of nuclear waste. The Review Team also began work on a public information booklet describing the repository program in nontechnical terms. That booklet will be distributed widely upon completion

  8. Rhode Island crystalline repository project: Technical progress report, 1984-1986

    International Nuclear Information System (INIS)

    1986-01-01

    A Nuclear Waste Fund established by the Nuclear Waste Policy Act of 1982 provided financial support to the State of Rhode Island for its participation in the high-level radioactive waste repository siting program. In 1984, the Office of the Governor set up a multidisciplinary Project Review Team consisting of staff from three State agencies and the University of Rhode Island. Members of the Review Team attended several meetings throughout the reporting period to voice their concerns about siting directly to the US Department of Energy (DOE). Written comments were also submitted on draft plans and reports. Many of Rhode Island's recommendations in these comments were later adopted. In May, 1986, Secretary of Energy John Herrington announced the suspension of the crystalline repository siting program. The remainder of the year was spent monitoring litigation challenging that decision and pending legislation. Administrative phase-down of the program was essentially complete by the close of the calendar year

  9. Progress report on research and development work 1983 of the nuclear fusion project

    International Nuclear Information System (INIS)

    Finken, D.

    1984-02-01

    The studies of the Kernforschungszentrum Karlsruhe on fusion using magnetic confinement are included in the nuclear fusion project and embedded into the European Fusion Technology Programme. The studies are promoted via an association contract between KfK and Euratom by the European Commission. Some of the studies exceed the volume defined in the technology programme. These contributions, most of them studies, help to connect the various sectors and prepare new tasks, with regard to the extension of the technology programme to be expected in the coming years and the planning activities for NET. The reports summarized here are contributions of the institutes and thus arranged according to organization units. The tasks which the KfK has taken over from the Fusion Technology Programme of the EC are compiled in the appendix. (orig./GG) [de

  10. Progress Report on the GROWTH (GNSS Reflectometry for Ocean Waves, Tides, and Height) Research Project

    Science.gov (United States)

    Kitazawa, Y.; Ichikawa, K.; Akiyama, H.; Ebinuma, T.; Isoguchi, O.; Kimura, N.; Konda, M.; Kouguchi, N.; Tamura, H.; Tomita, H.; Yoshikawa, Y.; Waseda, T.

    2016-12-01

    Global Navigation Satellite Systems (GNSS), such as GPS is a system of satellites that provide autonomous geo-spatial positioning with global coverage. It allows small electronic receivers to determine their location to high precision using radio signals transmitted from satellites, GNSS reflectometry (GNSS-R) involves making measurements from the reflections from the Earth of navigation signals from GNSS satellites. Reflected signals from sea surface are considered that those are useful to observe sea state and sea surface height. We have started a research program for GNSS-R applications on oceanographic observations under the contract with MEXT (Ministry of Education Culture, Sports, Science and Technology, JAPAN) and launched a Japanese research consortium, GROWTH (GNSS Reflectometry for Ocean Waves, Tides, and Height). It is aiming to evaluate the capabilities of GNSS-R observations for oceanographic phenomena with different time scales, such as ocean waves (1/10 to tens of seconds), tides (one or half days), and sea surface dynamic height (a few days to years). In situ observations of ocean wave spectrum, wind speed vertical profile, and sea surface height will be quantitatively compared with equivalent estimates from simultaneous GNSS-R measurements. The GROWTH project will utilize different types of observation platforms; marine observation towers (about 20 m height), multi-copters (about 100 to 150 m height), and much higher-altitude CYGNSS data. Cross-platform data, together with in situ oceanographic observations, will be compared after adequate temporal averaging that accounts differences of the footprint sizes and temporal and spatial scales of oceanographic phenomena. This paper will provide overview of the GROWTH project, preliminary test results, obtained by the multi-sensor platform at observation towers, suggest actual footprint sizes and identification of swell. Preparation status of a ground station which will be supplied to receive CYGNSS data

  11. Food irradiation

    International Nuclear Information System (INIS)

    Paganini, M.C.

    1991-06-01

    Food treatment by means of ionizing energy, or irradiation, is an innovative method for its preservation. In order to treat important volumes of food, it is necessary to have industrial irradiation installations. The effect of radiations on food is analyzed in the present special work and a calculus scheme for an Irradiation Plant is proposed, discussing different aspects related to its project and design: ionizing radiation sources, adequate civil work, security and auxiliary systems to the installations, dosimetric methods and financing evaluation methods of the project. Finally, the conceptual design and calculus of an irradiation industrial plant of tubercles is made, based on the actual needs of a specific agricultural zone of our country. (Author) [es

  12. 'BioQuaRT' project: design of a novel in situ protocol for the simultaneous visualisation of chromosomal aberrations and micronuclei after irradiation at microbeam facilities

    International Nuclear Information System (INIS)

    Patrono, C.; Testa, A.; Monteiro Gil, O.; Giesen, U.; Langner, F.; Rabus, H.; Pinto, M.

    2015-01-01

    The aim of the 'BioQuaRT' (Biologically weighted Quantities in Radiotherapy) project is to develop measurement techniques for characterising charged particle track structure on different length scales, and to correlate at the cellular level the track structure properties with the biological effects of radiation. This multi-scale approach will allow characterisation of the radiation qualities used in radiotherapy and the related biological effects. Charged-particle microbeam facilities were chosen as the platforms for all radiobiology experiments in the 'BioQuaRT' project, because they allow targeting single cells (or compartments of a cell) with a predefined number of ionising particles and correlating the cell-by-cell induced damage with type and energy of the radiation and with the number of ions per cell. Within this project, a novel in situ protocol was developed for the analysis of the mis-repaired and/or unrepaired chromosome damage induced by charged-particle irradiations at the Physikalisch-Technische Bundesanstalt (PTB) ion microbeam facility. Among the cytogenetic biomarkers to detect and estimate radiation-induced DNA damage in radiobiology, chromosomal aberrations and micronuclei were chosen. The characteristics of the PTB irradiation system required the design of a special in situ assay: specific irradiation dishes with a base made from a bio-foil 25-μm thick and only 3000-4000 cells seeded and irradiated per dish. This method was developed on Chinese hamster ovary (CHO) cells, one of the most commonly used cell lines in radiobiology in vitro experiments. The present protocol allows the simultaneous scoring of chromosome aberrations and micronuclei on the same irradiated dish. Thanks to its versatility, this method could also be extended to other radiobiological applications besides the single-ion microbeam irradiations. (authors)

  13. Results of work in the hot cells of Laboratory Testing Materials Irradiated Areva of Carina project for the expansion of the database of mechanical characteristics of fractures in materials of RPV German irradiated

    International Nuclear Information System (INIS)

    Barthelmes, J.; Schabel, H.; Hein, H.; Kein, E.; Eiselt, C.

    2013-01-01

    In the frame of the already completed research projects CARINA and its predecessor CARISMA a data base was created for pre-irradiated original RPV steels of German PWRs which allowed to examine the consequences if the Master Curve (T 0 ) approach instead of the RT N OT concept is applied to the RPV safety assessment. Furthermore in CARINA different irradiation conditions with respect to the accumulated neutron fluences and specific impact parameters were investigated. Besides a brief introduction of the CARINA project and an overview of the main results an overview on the requirements of the hot laboratory work in terms of specimen manufacturing and material testing is given and examples for realization are shown. (Author)

  14. Umatilla River Fish Passage Operations Project : Annual Progress Report October 2007 - September 2008.

    Energy Technology Data Exchange (ETDEWEB)

    Bronson, James P.; Loffink, Ken; Duke, Bill

    2008-12-31

    adult Pacific lamprey was trapped and released above the Westland ladder this year. The Threemile Dam west bank juvenile bypass was opened on March 11, 2008 in conjunction with water deliveries and continued through the summer. West Extension Irrigation District (WEID) discontinued diverting live flow on June 24, 2008 but the bypass remained open throughout the project year. The juvenile trap was not operated this project year.

  15. Detection methods of irradiated foodstuffs

    Energy Technology Data Exchange (ETDEWEB)

    Ponta, C C; Cutrubinis, M; Georgescu, R [IRASM Center, Horia Hulubei National Institute for Physics and Nuclear Engineering, PO Box MG-6, RO-077125 Magurele-Bucharest (Romania); Mihai, R [Life and Environmental Physics Department, Horia Hulubei National Institute for Physics and Nuclear Engineering, PO Box MG-6, RO-077125 Magurele-Bucharest (Romania); Secu, M [National Institute of Materials Physics, Bucharest (Romania)

    2005-07-01

    Full text: Food irradiation has, in certain circumstances, an important role to play both in promoting food safety and in reducing food losses. The safety and availability of nutritious food are essential components of primary health care. WHO actively encourages the proper use of food irradiation in the fight against foodborne diseases and food losses. To this end, it collaborates closely with FAO and IAEA. Food irradiation can have a number of beneficial effects, including delay of ripening and prevention of sprouting; control of insects, parasites, helminths, pathogenic and spoilage bacteria, moulds and yeasts; and sterilization, which enables commodities to be stored unrefrigerated for long periods. The 1990s witnessed a significant advancement in food irradiation processing. As a result, progress has been made in commercialization of the technology, culminating in greater international trade in irradiated foods and the implementation of differing regulations relating to its use in many countries. Codex General Standard for Irradiated Foodstuffs and Recommended International Code of Practice for the Operation of Irradiation Facilities Used for the Treatment of Foods regulate food irradiation at international level. At European Union level there are in power Directive 1999/2/EC and Directive1999/3/EC. Every particular country has also its own regulations regarding food irradiation. In Romania, since 2002 the Norms Regarding Foodstuffs and Food Ingredients Treated by Ionizing Radiation are in power. These Norms are in fact the Romanian equivalent law of the European Directives 1999/2/EC and 1999/3/EC. The greater international trade in irradiated foods has led to the demand by consumers that irradiated food should be clearly labeled as such and that methods capable of differentiating between irradiated and nonirradiated products should be available. Thus a practical basis was sought to allow consumers to exercise a free choice as to which food they purchase. If a

  16. Estimation of damage by inmates of a PWR Reactor neutron irradiation. Project ZIRP; Estimacion del Dano por Irradiacion Neutronica en los Internos de un Reactor PWR. Proyecto ZIRP

    Energy Technology Data Exchange (ETDEWEB)

    Cadenas Mendicoa, A. M.

    2013-07-01

    The study presented here focuses on the analysis of neutron and gamma irradiation damage suffered by the inmates of the JC NPP reactor metallic materials throughout its operational life. Such analysis of radiation are part of a project of great international impact, led by EPRI (Electric Power Research Institute) from the MRP (Materials Reliability Program), which aims to relate the degradation of the properties of metallic materials of the inmates of the reactor, with the conditions of operation and irradiation to which have been subjected during the operational life of the plant.

  17. Chernobyl Studies Project: Working group 7.0, Environmental transport and health effects. Progress report, March--September 1994

    Energy Technology Data Exchange (ETDEWEB)

    Anspaugh, L.R.; Hendrickson, S.M. [eds.

    1994-12-01

    In April 1988, the US and the former-USSR signed a Memorandum of Cooperation (MOC) for Civilian Nuclear Reactor Safety; this MOC was a direct result of the accident at the Chernobyl Nuclear Power Plant Unit 4 and the following efforts by the two countries to implement a joint program to improve the safety of nuclear power plants and to understand the implications of environmental releases. A Joint Coordinating Committee for Civilian Nuclear Reactor Safety (JCCCNRS) was formed to implement the MOC. The JCCCNRS established many working groups; most of these were the responsibility of the Nuclear Regulatory Commission, as far as the US participation was concerned. The lone exception was Working Group 7 on Environmental Transport and Health Effects, for which the US participation was the responsibility of the US Department of Energy (DOE). The purpose of Working Group 7 was succintly stated to be, ``To develop jointly methods to project rapidly the health effects of any future nuclear reactor accident.`` To implement the work DOE then formed two subworking groups: 7.1 to address Environmental Transport and 7.2 to address Health Effects. Thus, the DOE-funded Chernobyl Studies Project began. The majority of the initial tasks for this project are completed or near completion. The focus is now turned to the issue of health effects from the Chernobyl accident. Currently, we are involved in and making progress on the case-control and co-hort studies of thyroid diseases among Belarussian children. Dosimetric aspects are a fundamental part of these studies. We are currently working to implement similar studies in Ukraine. A major part of the effort of these projects is supporting these studies, both by providing methods and applications of dose reconstruction and by providing support and equipment for the medical teams.

  18. REBL: design progress toward 16 nm half-pitch maskless projection electron beam lithography

    Science.gov (United States)

    McCord, Mark A.; Petric, Paul; Ummethala, Upendra; Carroll, Allen; Kojima, Shinichi; Grella, Luca; Shriyan, Sameet; Rettner, Charles T.; Bevis, Chris F.

    2012-03-01

    REBL (Reflective Electron Beam Lithography) is a novel concept for high speed maskless projection electron beam lithography. Originally targeting 45 nm HP (half pitch) under a DARPA funded contract, we are now working on optimizing the optics and architecture for the commercial silicon integrated circuit fabrication market at the equivalent of 16 nm HP. The shift to smaller features requires innovation in most major subsystems of the tool, including optics, stage, and metrology. We also require better simulation and understanding of the exposure process. In order to meet blur requirements for 16 nm lithography, we are both shrinking the pixel size and reducing the beam current. Throughput will be maintained by increasing the number of columns as well as other design optimizations. In consequence, the maximum stage speed required to meet wafer throughput targets at 16 nm will be much less than originally planned for at 45 nm. As a result, we are changing the stage architecture from a rotary design to a linear design that can still meet the throughput requirements but with more conventional technology that entails less technical risk. The linear concept also allows for simplifications in the datapath, primarily from being able to reuse pattern data across dies and columns. Finally, we are now able to demonstrate working dynamic pattern generator (DPG) chips, CMOS chips with microfabricated lenslets on top to prevent crosstalk between pixels.

  19. Hydrologic Resources Management Program and Underground Test Area Project FY2005 Progress Report

    International Nuclear Information System (INIS)

    Eaton, G F; Genetti, V; Hu, Q; Hudson, G B; Kersting, A B; Lindvall, R E; Moran, J E; Nimz, G J; Ramon, E C; Rose, T P; Shuller, L; Williams, R W; Zavarin, M; Zhao, P

    2007-01-01

    This report describes FY 2005 technical studies conducted by the Chemical Biology and Nuclear Science Division (CBND) at Lawrence Livermore National Laboratory (LLNL) in support of the Hydrologic Resources Management Program (HRMP) and the Underground Test Area Project (UGTA). These programs are administered by the U.S. Department of Energy, National Nuclear Security Administration, Nevada Site Office (NNSA/NSO) through the Defense Programs and Environmental Restoration Divisions, respectively. HRMP-sponsored work is directed toward the responsible management of the natural resources at the Nevada Test Site (NTS), enabling its continued use as a staging area for strategic operations in support of national security. UGTA-funded work emphasizes the development of an integrated set of groundwater flow and contaminant transport models to predict the extent of radionuclide migration from underground nuclear testing areas at the NTS. The report is organized on a topical basis and contains five chapters that highlight technical work products produced by CBND. However, it is important to recognize that most of this work involves collaborative partnerships with the other HRMP and UGTA contract organizations. These groups include the Energy and Environment Directorate at LLNL (LLNL-E and E), Los Alamos National Laboratory (LANL), the Desert Research Institute (DRI), the U.S. Geological Survey (USGS), Stoller-Navarro Joint Venture (SNJV), and Bechtel Nevada (BN)

  20. MHD Integrated Topping Cycle Project. Thirteenth quarterly technical progress report, August 1, 1990--October 31, 1990

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    The overall objective of the project is to design and construct prototypical hardware for an integrated MHD topping cycle, and conduct long duration proof-of-concept tests of integrated system at the US DOE Component Development and Integration Facility in Butte, Montana. The results of the long duration tests will augment the existing engineering design data base on MHD power train reliability, availability, maintainability, and performance, and will serve as a basis for scaling up the topping cycle design to the next level of development, an early commercial scale power plant retrofit. The components of the MHD power train to be designed, fabricated, and tested include: A slagging coal combustor with a rated capacity of 50 MW thermal input, capable of operation with an Eastern (Illinois {number_sign}6) or Western (Montana Rosebud) coal, a segmented supersonic nozzle, a supersonic MHD channel capable of generating at least 1.5 MW of electrical power, a segmented supersonic diffuser section to interface the channel with existing facility quench and exhaust systems, a complete set of current control circuits for local diagonal current control along the channel, and a set of current consolidation circuits to interface the channel with the existing facility inverter.

  1. Synchrotron topographic project. Progress report, February 20, 1981-January 20, 1982

    International Nuclear Information System (INIS)

    Bilello, J.C.

    1982-01-01

    The Synchrotron Topography Project (STP) has under design and construction various phases of a dedicated beam line for x-ray diffraction topography users in conjunction with the National Synchrotron Light Source at Brookhaven National Laboratory. During the past year final design and procurement phase has been completed for the following: (1) Experimental Hutch, (2) White Beam Camera, (3) Detector Arm for White Beam Camera, (4) Film Cassette System, (5) Medium Resolution Real-time TV System, (6) Lift Table Assembly, (7) Asymmetric Camera Base Mount, (8) Motor Control System, and (9) Computer system. Experimental work has been initiated on using reflection topography to study fracture surfaces. Preliminary results, both with Berg-Barrett, as well as with Synchrotron Topography done in collaboration with the Daresbury, U.K. facility show that defects generated in the near surface layers can be detected. Research work on the effects of stress concentration and geometric effects due to grain boundaries on the fracture of tungsten has been completed

  2. Greenhouse gas emission trends and projections in Europe 2012. Tracking progress towards Kyoto and 2020 targets

    Energy Technology Data Exchange (ETDEWEB)

    Gores, S.; Scheffler, M.; Graichen, V. [Oeko-Institut (Oeko), Freiburg (Germany)] [and others

    2012-10-15

    At the end of 2011, almost all European countries were on track towards their Kyoto targets for 2008-2012. The EU-15 also remained on track to achieve its Kyoto target. Italy, however, was not on track. Spain plans to acquire a large quantity of Kyoto units through the KP's flexible mechanisms to achieve its target. With emission caps already set for the economic sectors under the EU Emissions Trading Scheme (EU ETS), emissions reductions during 2012 in the sectors outside the EU ETS together with reductions by carbon sinks will set the frame for how many Kyoto units Member States need to acquire to reach their individual targets. Hence, both the development and delivery of adequate plans to acquire enough Kyoto credits is becoming increasingly important. ETS emissions from 2008 to 2011 were on average 5 % below these caps, which results in an oversupply of allowances. The EU ETS is undergoing important changes in view of the third trading phase from 2013 to 2020. Most EU Member States project that in 2020, their emissions outside the EU ETS will be lower than their national targets set under the Climate and Energy Package. However, further efforts will be necessary to achieve longer term reductions. (Author)

  3. Ceramic technology for advanced heat engines project: Semiannual progress report, October 1986-March 1987

    Energy Technology Data Exchange (ETDEWEB)

    1987-08-01

    This report contains four subelements: (1) Monolithics, (2) Ceramic Composites, (3) Thermal and Wear Coatings, and (4) Joining. Ceramic research conducted within the Monolithics subelement currently includes work activities on green state ceramic fabrication, characterization, and densification and on structural, mechanical, and physical properties of these ceramics. Research conducted within the Ceramic Composites subelement currently includes silicon carbide and oxide-based composites, which, in addition to the work activities cited for Monolithics, include fiber synthesis and characterization. Research conducted in the Thermal and Wear Coatings subelement is currently limited to oxide-base coatings and involves coating synthesis, characterization, and determination of the mechanical and physical properties of the coatings. Research conducted in the Joining subelement currently includes studies of processes to produce strong stable joints between zirconia ceramics and iron-base alloys. A major objective of the research in the Materials and Processing project element is to systematically advance the understanding of the relationships between ceramic raw materials such as powders and reactant gases, the processing variables involved in producing the ceramic materials, and the resultant microstructures and physical and mechanical properties of the ceramic materials. Success in meeting this objective will provide US companies with new or improved ways for producing economical highly reliable ceramic components for advanced heat engines.

  4. 1986 progress report on R and D work of the Nuclear Fusion Project (PKF)

    International Nuclear Information System (INIS)

    Kast, G.

    1987-03-01

    The Kernforschungszentrum Karlsruhe (KfK) and the Max-Planck-Institute for Plasma Physics, Garching, have joined to form the Entwicklungsgemeinschaft Kernfusion, and under this roof perform research work on the physical and technical conditions and requirements of using the energy from nuclear fusion, and to plan the design and the construction of the necessary equipment for future large-scale experiments. The activities of the KfK for the development of fusion devices with magnetic confinement have been concentrated in the Nuclear Fusion Project, which cooperates in the European Fusion Technology Programme, on the basis of an association agreement between KfK and Euratom, supported by the European Commission. Supplementary KfK contributions, studies in most cases, create a connection between various fields of work, and prepare the road for new tasks, which in the years to come will be found in the extension of the Fusion Technology Programme and the planning work for NET. The reports collected in this annual survey are contributions from KfK Institutes of the year 1986. An annex presents the Easks taken over by KfK within the Fusion Technology Programme of the EC, and notes on the KfK Institutes taking part in the particular activities facilitate reference to the individual, full-text reports. (orig.) [de

  5. Snake River Sockeye Salmon Captive Broodstock Program Hatchery Element : Project Progress Report 2007 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Baker, Dan J.; Heindel, Jeff A.; Green, Daniel G.; Kline, Paul A.

    2008-12-17

    Numbers of Snake River sockeye salmon Oncorhynchus nerka have declined dramatically in recent years. In Idaho, only the lakes of the upper Salmon River (Sawtooth Valley) remain as potential sources of production (Figure 1). Historically, five Sawtooth Valley lakes (Redfish, Alturas, Pettit, Stanley, and Yellowbelly) supported sockeye salmon (Bjornn et al. 1968; Chapman et al. 1990). Currently, only Redfish Lake receives a remnant anadromous run. On April 2, 1990, the National Oceanic and Atmospheric Administration Fisheries Service (NOAA - formerly National Marine Fisheries Service) received a petition from the Shoshone-Bannock Tribes (SBT) to list Snake River sockeye salmon as endangered under the United States Endangered Species Act (ESA) of 1973. On November 20, 1991, NOAA declared Snake River sockeye salmon endangered. In 1991, the SBT, along with the Idaho Department of Fish & Game (IDFG), initiated the Snake River Sockeye Salmon Sawtooth Valley Project (Sawtooth Valley Project) with funding from the Bonneville Power Administration (BPA). The goal of this program is to conserve genetic resources and to rebuild Snake River sockeye salmon populations in Idaho. Coordination of this effort is carried out under the guidance of the Stanley Basin Sockeye Technical Oversight Committee (SBSTOC), a team of biologists representing the agencies involved in the recovery and management of Snake River sockeye salmon. National Oceanic and Atmospheric Administration Fisheries Service ESA Permit Nos. 1120, 1124, and 1481 authorize IDFG to conduct scientific research on listed Snake River sockeye salmon. Initial steps to recover the species involved the establishment of captive broodstocks at the Eagle Fish Hatchery in Idaho and at NOAA facilities in Washington State (for a review, see Flagg 1993; Johnson 1993; Flagg and McAuley 1994; Kline 1994; Johnson and Pravecek 1995; Kline and Younk 1995; Flagg et al. 1996; Johnson and Pravecek 1996; Kline and Lamansky 1997; Pravecek and

  6. Geothermal direct-heat utilization assistance. Federal Assistance Program quarterly project progress report, April 1--June 30, 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-07-01

    This report summarizes geothermal technical assistance, R and D and technology transfer activities of the Geo-Heat Center at Oregon Institute of Technology for the third quarter of FY98 (April--June, 1998). It describes 231 contacts with parties during this period related to technical assistance with geothermal direct heat projects. Areas dealt with included requests for general information including material for high school and university students, and material on geothermal heat pumps, resource and well data, spacing heating and cooling, greenhouses, aquaculture, equipment, district heating, resorts and spas, industrial applications, snow melting and electric power. Research activities include work on model construction specifications for line shaft submersible pumps and plate heat exchangers, and a comprehensive aquaculture developers package. A brochure on Geothermal Energy in Klamath County was developed for state and local tourism use. Outreach activities include the publication of the Quarterly Bulletin (Vol. 19, No. 2) with articles on research at the Geo-Heat Center, sustainability of geothermal resources, injection well drilling in Boise, ID and a greenhouse project in the Azores. Other outreach activities include dissemination of information mainly through mailings of publications, tours of local geothermal uses, geothermal library acquisitions and use, participation in workshops, short courses and technical meetings by the staff, and progress monitor reports on geothermal activities.

  7. Development of a Methodology for Hydrogeological Characterization of Faults: Progress of the Project in Berkeley, California

    Science.gov (United States)

    Goto, J.; Moriya, T.; Yoshimura, K.; Tsuchi, H.; Karasaki, K.; Onishi, T.; Ueta, K.; Tanaka, S.; Kiho, K.

    2010-12-01

    The Nuclear Waste Management Organization of Japan (NUMO), in collaboration with Lawrence Berkeley National Laboratory (LBNL), has carried out a project to develop an efficient and practical methodology to characterize hydrologic property of faults since 2007, exclusively for the early stage of siting a deep underground repository. A preliminary flowchart of the characterization program and a classification scheme of fault hydrology based on the geological feature have been proposed. These have been tested through the field characterization program on the Wildcat Fault in Berkeley, California. The Wildcat Fault is a relatively large non-active strike-slip fault which is believed to be a subsidiary of the active Hayward Fault. Our classification scheme assumes the contrasting hydrologic features between the linear northern part and the split/spread southern part of the Wildcat Fault. The field characterization program to date has been concentrated in and around the LBNL site on the southern part of the fault. Several lines of electrical and reflection seismic surveys, and subsequent trench investigations, have revealed the approximate distribution and near-surface features of the Wildcat Fault (see also Onishi, et al. and Ueta, et al.). Three 150m deep boreholes, WF-1 to WF-3, have been drilled on a line normal to the trace of the fault in the LBNL site. Two vertical holes were placed to characterize the undisturbed Miocene sedimentary formations at the eastern and western sides of the fault (WF-1 and WF-2 respectively). WF-2 on the western side intersected the rock formation, which was expected only in WF-1, and several of various intensities. Therefore, WF-3, originally planned as inclined to penetrate the fault, was replaced by the vertical hole further to the west. It again encountered unexpected rocks and faults. Preliminary results of in-situ hydraulic tests suggested that the transmissivity of WF-1 is ten to one hundred times higher than WF-2. The monitoring

  8. Hydrologic Resources Management Program and Underground Test Area Project FY 2001-2002 Progress Report

    International Nuclear Information System (INIS)

    Rose, T.P.; Kersting, A.B.; Harris, L.J.; Hudson, G.B.; Smith, D.K.; Williams, R.W.; Loewen, D.R.; Nelson, E.J.; Allen, P.G.; Ryerson, F.J.; Pawloski, G.A.; Laue, C.A.; Moran, J.E.

    2003-01-01

    This report contains highlights of FY 2001 and 2002 technical studies conducted by the Analytical and Nuclear Chemistry Division (ANCD) at Lawrence Livermore National Laboratory (LLNL) in support of the Hydrologic Resources Management Program (HRMP) and the Underground Test Area (UGTA) Project. These programs are administered by the U.S. Department of Energy, National Nuclear Security Administration, Nevada Site Office (NNSA/NSO) through the Defense Programs and Environmental Restoration Divisions, respectively. HRMP-sponsored work emphasizes the Defense Programs goal of responsible management of natural resources at the NTS, while UGTA-funded work focuses on defining the extent of radionuclide contamination in NTS groundwater resulting from underground nuclear testing. The report is organized on a topical basis, and contains eight chapters that reflect the range of technical work performed by LLNL-ANCD in support of HRMP and UGTA. Chapter 1 describes recent hot well sampling efforts at the NTS, and presents the results of chemical and isotopic analyses of groundwater samples from six near-field wells. These include the Cambric (UE-5n), Bilby (U-3cn PS No.2), Bourbon (UE-7nS), Nash (UE-2ce), Tybo/Benham (ER-20-5 No.3), and Almendro (U-19v PS No.1ds) sites. The data generated by the hot well program is vital to the development and validation of contaminant transport models at the NTS. Chapter 2 discusses the results of xenon isotope measurements of groundwater samples from the six near-field wells described in Chapter 1. This work demonstrates that fission xenon is present in the water at levels that are readily measurable and highlights the significant differences in xenon concentrations and isotopic abundances at different sites. These differences provide insight into the early cooling history of nuclear test cavities, and may assist in predicting the distribution of the source term in the near-field environment. Chapter 3 is an investigation of the distribution

  9. Annual report on reactor safety research projects sponsored by the Ministry for Research and Technology of the Federal Republic of Germany. Reporting period 1993. Progress report

    International Nuclear Information System (INIS)

    1994-10-01

    The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, by order of the BMFT, informs continuously of the status of such investigations by means of semi-annual and annual publication of progress reports within the series GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about objectives, the work performed, the results, the next steps of the work etc. The individual reports are prepared in a standard form by the contractors themselves as a documentation of their progress in work and published by the Forschungsbetreuung at the GRS, (FB) (Research Coordination Department), within the framework of general information of progress in reactor safety research. The individual reports are classified according to the same classification system as applied in the nuclear index of the CEC (Commission of the European Communities) and the OECD (Organization for Economic Cooperation and Development). The reports are arranged in sequence of their project numbers. (orig./HP)

  10. Design project of the dosimetry control system in the independent CO2 loop for cooling the samples irradiated in the RA reactor vertical experimental channels, Vol. V

    International Nuclear Information System (INIS)

    1964-01-01

    Design project of the dosimetry control system in the independent CO 2 loop for cooling the samples irradiated in the RA reactor vertical experimental channels includes the following: calculations of CO 2 gas activity, design of the dosimetry control system, review of the changes that should be done in the RA reactor building for installing the independent CO 2 loop, specification of the materials with cost estimation, engineering drawings of the system [sr

  11. BX in situ oil shale project. Annual technical progress report, March 1, 1979-February 29, 1980 and quarterly technical progress report, December 1, 1979-February 29, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Dougan, P.M.

    1980-03-20

    During the year, design, construction and installation of all project equipment was completed, and continuous steam injection began on September 18, 1979 and continued until February 29, 1980. In the five-month period of steam injection, 235,060 barrels of water as steam at an average wellhead pressure of 1199 psig and an average wellhead temperature of 456/sup 0/F were injected into the eight project injection wells. Operation of the project at design temperature and pressure (1000/sup 0/F and 1500 psig) was not possible due to continuing problems with surface equipment. Environmental monitoring at the project site continued during startup and operation.

  12. Food irradiation process control and acceptance. Regional UNDP project for Asia and the Pacific, mission undertaken in the Philippines. Food irradiation process control, regulation and acceptance RPFI-Phase 3

    International Nuclear Information System (INIS)

    Giddings, G.G.

    1992-01-01

    At the request of the Government of the Philippines, the FAO/IAEA expert undertook a one-week mission between 3 and 9 May 1991, to the Philippine Nuclear Research Institute (PNRI). This mission included the following: The expert advised and assisted on matters related to food irradiation relevant to the Philippines and its on-going programmes. A meeting was held with the Chairman and several members of the National Committee on Food Irradiation, at which the expert briefed the group on regulatory and implementation developments in other countries of the region, and the globe, and advised on near-term steps to be taken in the Philippines. A related visit and tour of the Food Development Center of Food Terminal Inc., which is pursuing an FAO/IAEA food irradiation research project was also made. Regarding radiation disinfestation of agricultural commodities for quarantine control purposes, visits and discussions were held at the facilities of Philippine - Far East Agro Products Inc., a major exporter, plus to the offices of the Government, Plant Quarantine Service, and the Post Harvest Technology Research Center at the University of the Philippines, Los Banos. In connection with fishery product applications, the expert toured the processing plant of Mindanao Food Corporation and met with its key executives. The firm has a growing export business in frozen raw and processed seafoods, and has been cooperating in an FAO/IAEA supported study of the irradiation of same to improve hygiene and post-defrosting market life. In connection with the promulgation of a first Philippine irradiated foods law and/or regulation, the expert had a meeting with key staff of the Government Bureau of Food and Drugs, again in the company of PNRI staff counterparts. The experts also provided a seminar to PNRI staff and invited guests before leaving for Indonesia, followed by Vietnam for similar UNDP-supported FAO/IAEA missions. (author)

  13. Project progress report

    Energy Technology Data Exchange (ETDEWEB)

    Isakov, A. I. [Russian Academy of Sciences (Russia)

    1997-12-31

    Works of two variety have been fulfilled: first, research of polystyrene shells formation conditions in drop tower furnace and ballistic furnace; second, creation of computer codes for simulation of shells formation processes, including numerous nucleation. Besides that polystyrene shells with diameter up to 2 mm transmitted to LLNL in parcel.

  14. Food irradiation; Global aspects and future prospects

    Energy Technology Data Exchange (ETDEWEB)

    Matsuyama, Akira (Tokyo Univ. of Agriculture (Japan). Nodai Research Institute)

    1990-07-01

    This paper reviews researches, commentaries, and conference and public records of food irradiation, published mainly during the period 1987-1989, focusing on the current conditions of food irradiation that may pose not only scientific or technologic problems but also political issues or consumerism. Approximately 50 kinds of food, although not enough to fill economic benefit, are now permitted for food irradiation in the world. Consumerism is pointed out as the major factor that precludes the feasibility of food irradiation in the world. In the United States, irradiation is feasible only for spices. Food irradiation has already been feasible in France, Hollands, Belgium, and the Soviet Union; has under consideration in the Great Britain, and has been rejected in the West Germany. Although the feasibility of food irradiation is projected to increase gradually in the future, commercial success or failure depends on the final selection of consumers. In this respect, the role of education and public information are stressed. Meat radicidation and recent progress in the method for detecting irradiated food are referred to. (N.K.) 128 refs.

  15. Ground-water monitoring compliance projects for Hanford Site Facilities: Progress report for the period April 1--June 30, 1988: Volume 1, Text

    International Nuclear Information System (INIS)

    1988-09-01

    This is Volume 1 of a two-volume set of documents that describes the progress of 10 Hanford Site ground-water monitoring projects for the period April 1 to June 30, 1988. This volume discusses the projects; Volume 2 provides as-built diagrams, drilling logs, and geophysical logs for wells drilled during this period in the 100-N Area and near the 216-A-36B Crib

  16. Effects of gamma irradiation on pepper's volatile compounds sensory qualities and pest infestation control. Part of a coordinated programme in the Asian Regional Cooperative Project of Food Irradiation

    International Nuclear Information System (INIS)

    Khan, A.M.; Bahari Bin, I.

    1984-04-01

    The effects of gamma irradiation, packaging materials and storage time of black and white peppers on the infestation and reinfestation of microorganism and insects were evaluated. The samples were irradiated at the doses between 2 and 9 kGy. The packaging materials consisted of polypropylene woven bags laminated with thin polyethylene (PPE) and polyethylene bags (PE) of different thickness, 0.05, 01.2 and 0.17 mm. The jute bag was used as a control material. The changes of infestation and reinfestation status were observed for 6 months in Malaysia and for the next 2 months the changes were evaluated when the samples had reached Japan. Results obtained indicated that irradiation at a dose up to 9 kGy reduced the bacterial load of black pepper from 1.6x10 7 /g to 2 /g, while the dose of 6 kGy was required to reduce the population in white pepper from 2.3x10 4 /g to 2 /g. The original population of mould-yeast was relatively low (approx. 10 4 /g) and could be reduced to 2 /g at only 2 kGy. No problems and difficulties were faced with regard to the transportation of the peppers. However, prolonged storage time may encourage microbial growth, and 4 months of storage was a critical period for black pepper. Two species of Anobiidae infesting pepper had been identified, Lasioderma serricone (Fabricius) which made up 80% of the insect counts and Stegobium pamiceum (L.). However, at the doses applied and packaging materials used, there was no reinfestation for all but the material PPPE (no observation made for jute bags)

  17. Laboratory and field studies related to the Radionuclide Migration Project: Progress report, October 1, 1985-September 30, 1986

    International Nuclear Information System (INIS)

    Thompson, J.L.

    1987-08-01

    In this report we describe the work done at Los Alamos in support of the Radionuclide Migration project during fiscal year 1986. We have continued to monitor the transport of tritium and 85 Kr from the Cambric explosion zone to the satellite well, which is pumped at 600 gal/min. Corresponding movement of cationic radionuclides such as 137 Cs and 90 Sr has not yet been observed after 12 yr of pumping, nor have we seen evidence that these strongly sorbing ions move in conjunction with colloids. We have analyzed more data from the Cheshire study site but have not resolved the uncertainties regarding the distribution and movement of radioactive materials at this location. Our attempts to improve our analytical capability for 36 Cl and 99 Tc have resulted in some progress. Similarly, we have increased our understanding of radionuclide transport phenomena such as channeling in fracture flow and anion exclusion in zeolites and clays. A sample exchange with Lawrence Livermore National Laboratory has helped us identify critical steps in our procedures for collecting and analyzing large-volume water samples. We have surveyed potential sites on Pahute Mesa at the Nevada Test Site for future radionuclide migration studies and conclude that there are none other than Cheshire presently available, and none are likely to be created in the near future. The Laboratory has engaged recently in radionuclide migration studies sponsored by our weapons program; we reviewed this work in an appendix to the annual report

  18. Childhood Obesity Declines Project: An Effort of the National Collaborative on Childhood Obesity Research to Explore Progress in Four Communities.

    Science.gov (United States)

    Kauh, Tina J; Dawkins-Lyn, Nicola; Dooyema, Carrie; Harris, Carole; Jernigan, Jan; Kettel Khan, Laura; Ottley, Phyllis; Young-Hyman, Deborah

    2018-03-01

    Recent findings show that national childhood obesity prevalence overall is improving among some age groups, but that disparities continue to persist, particularly among populations that have historically been at higher risk of obesity and overweight. Over the past several years, many jurisdictions at the city or county level across the nation have also reported declines. Little evaluation has focused on understanding the factors that influence the implementation of efforts to reduce childhood obesity rates. This article summarizes the rationale, aims, and overall design of the Childhood Obesity Declines Project (COBD), which was the first of its kind to systematically study and document the what, how, when, and where of community-based obesity strategies in four distinct communities across the nation. COBD was initiated by the National Collaborative on Childhood Obesity Research (NCCOR), was led by a subset of NCCOR advisors and a research team at ICF, and was guided by external advisors made up of researchers, decision makers, and other key stakeholders. The research team used an adapted version of the Systematic Screening and Assessment method to review and collect retrospective implementation data in four communities. COBD found that sites implemented strategies across the many levels and environments that impact children's well being (akin to the social-ecological framework), building a Culture of Health in their communities. COBD demonstrates how collaboratives of major funders with the support of other experts and key stakeholders, can help to accelerate progress in identifying and disseminating strategies that promote healthy eating and physical activity.

  19. Guidance for growth factors, projections, and control strategies for the 15 percent rate-of-progress plans

    International Nuclear Information System (INIS)

    1993-03-01

    Section 182(b)(1) of the Clean Air Act (Act) requires all ozone nonattainment areas classified as moderate and above to submit a State Implementation Plan (SIP) revision by November 15, 1993, which describes, in part, how the areas will achieve an actual volatile organic compound (VOC) emissions reduction of at least 15 percent during the first 6 years after enactment of the Clean Air Act Amendments of 1990 (CAAA). In addition, the SIP revision must describe how any growth in emissions from 1990 through 1996 will be fully offset. It is important to note that section 182(b)(1) also requires the SIP for moderate areas to provide for reductions in VOC and nitrogen oxides (NOx) emissions as necessary to attain the national primary ambient air quality standard for ozone by November 15, 1996. The guidance document focuses on the procedures for developing 1996 projected emissions inventories and control measures which moderate and above ozone nonattainment areas must include in their rate-of-progress plans. The document provides technical guidance to support the policy presented in the 'General Preamble: Implementation of Title I of the CAAA of 1990' (57 FR 13498)

  20. Regulatory aspect of food irradiation

    International Nuclear Information System (INIS)

    Harrison Aziz

    1985-01-01

    Interest in the process of food irradiation is reviewed once again internationally. Although food irradiation has been thoroughly investigated, global acceptance is still lacking. Factors which impede the progress of the technology are discussed here. (author)

  1. Proposal for a project to irradiation of fuel rods in hydraulic rabbit loop of R-2 reactor, Studsvik, Sweden

    International Nuclear Information System (INIS)

    Almeida, M.R.; Ambrozio, F.; Carvalho, S.R.B.

    1974-01-01

    It is planning to perform irradiation test on 21 little samples during a short time. These samples are formed by fuel rods covered with zircaloy 4. It contains UO sub(2) natural pellets and UO sub(2) enriched pellets. The type of fuel and the effects of some parameters, such as diametral gap, irradiation time, power liner density, thermal treatment, over the performance of the samples, will be studied. The parameters variations will be measured by pre and post-irradiation tests. Computer codes has been used in order to simulate the samples performance. The safety test performance via those simulations leads to conclusions that irradiation does not cause damage to integrity of the fuel rods. (M.I.)

  2. Progress report

    International Nuclear Information System (INIS)

    Brumovsky, M.

    1979-01-01

    Progress Report, covering the period up to the end of 1979 year, was sent to the IAEA according to the research agreement No. 1971 /CF. This work covered the following fields: preparation and dummy irradiation experiments with a new experimental capsule of ''CHOUCA-M'' type; measurement of temperature fields and design of specimen holders; measurement of neutron energy spectrum in the irradiation place in our experimental reactor of VVR-S type (Nuclear Research Institute) using a set of activation detectors; unification and calibration of the measurement of neutron fluence with the use of Fe, Cu, Mn-Mg and Co-Al monitors; development and improvement of the measuring apparatus and technique for the dynamic testing of pre-cracked specimens with determination of dynamic parameters of fracture mechanics; preparation and manufacture of testing specimens from the Japanese steels - forging, plate and weld metal; preparation of the irradiation capsule for assembling

  3. The Rise and Fall of the Social Science Curriculum Project in Iceland, 1974-1984: Reflections on Reason and Power in Educational Progress.

    Science.gov (United States)

    Edelstein, Wolfgang

    1987-01-01

    Examines the demise of the Icelandic Social Science Curriculum Project (SSCP) as an example of progressive educational reform thwarted by neofundamentalist ideologies. States that the paper goes beyond Jerome Bruner's 1984 account of the rise and fall of "Man: A Course of Study" to provide a deeper analysis of the politics of…

  4. Contracts for field projects and supporting research on enhanced oil recovery. Progress review No. 78, quarter ending March 31, 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-05-01

    This report presents descriptions of various research projects and field projects concerned with the enhanced recovery of petroleum. Contract numbers, principal investigators, company names, and project management information is included.

  5. International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO). 2011 Progress Report. Enhancing Global Nuclear Energy Sustainability

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-05-15

    When INPRO was established in 2000, some key characteristics and main objectives for the project were determined and remain basically unchanged to this day: to help ensure that nuclear energy is available to contribute to satisfying energy needs in the 21st century in a sustainable manner and to bring together technology holders, technology users and other stakeholders to consider jointly the national and international actions required to achieve desired innovations in nuclear reactors and fuel cycles. I wish to use the occasion of this INPRO Progress Report to review some of the key highlights of the past year and share with you my views and vision of INPRO's future. The ''Great East Japan Earthquake and Tsunami'' and the resulting accident at TEPCO's Fukushima Daiichi nuclear power plant occurred on 11 March 2011. In response to this accident and at the request of its Member States, the IAEA drafted an Action Plan which defines a programme of work o strengthen the global nuclear safety framework. The activities proposed in the Action Plan are meant to be implemented in the near term, to assess the safety of operating nuclear power plants n the light of lessons learned from the Fukushima Daiichi accident. The assessment covers both technical elements, specifically the design of nuclear power plants with regard to site specific extreme natural hazards, and institutional elements, such as the effectiveness of regulatory bodies, operating organizations and the international legal framework in regard to the implementation of IAEA Safety tandards and Conventions. The lessons learned in the medium and long terms will also be reflected n a periodic update of the design requirements for nuclear power plants, international safety tandards, regulations issued by national supervisory authorities, operational procedures, emergency planning and safety assessment methodologies. INPRO has a long term perspective and provides an assessment of the whole nuclear system. Ensuring

  6. International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO). 2011 Progress Report. Enhancing Global Nuclear Energy Sustainability

    International Nuclear Information System (INIS)

    2012-05-01

    When INPRO was established in 2000, some key characteristics and main objectives for the project were determined and remain basically unchanged to this day: to help ensure that nuclear energy is available to contribute to satisfying energy needs in the 21st century in a sustainable manner and to bring together technology holders, technology users and other stakeholders to consider jointly the national and international actions required to achieve desired innovations in nuclear reactors and fuel cycles. I wish to use the occasion of this INPRO Progress Report to review some of the key highlights of the past year and share with you my views and vision of INPRO's future. The ''Great East Japan Earthquake and Tsunami'' and the resulting accident at TEPCO's Fukushima Daiichi nuclear power plant occurred on 11 March 2011. In response to this accident and at the request of its Member States, the IAEA drafted an Action Plan which defines a programme of work o strengthen the global nuclear safety framework. The activities proposed in the Action Plan are meant to be implemented in the near term, to assess the safety of operating nuclear power plants n the light of lessons learned from the Fukushima Daiichi accident. The assessment covers both technical elements, specifically the design of nuclear power plants with regard to site specific extreme natural hazards, and institutional elements, such as the effectiveness of regulatory bodies, operating organizations and the international legal framework in regard to the implementation of IAEA Safety tandards and Conventions. The lessons learned in the medium and long terms will also be reflected n a periodic update of the design requirements for nuclear power plants, international safety tandards, regulations issued by national supervisory authorities, operational procedures, emergency planning and safety assessment methodologies. INPRO has a long term perspective and provides an assessment of the whole nuclear system. Ensuring

  7. Progress report of the 600 m borehole project of the CEC programme on management and storage of radioactive waste

    International Nuclear Information System (INIS)

    Hamilton, L.F.M.

    1991-07-01

    In the framework of the CEC Programme on Radioactive Waste Disposal (1990-1994), in situ experiments in salt deposits are conducted. The experimental results will be used to validate analytical techniques and computer models for prediction of salt behaviour. The experiments take place in the Asse II salt mine in Germany. Progress of the work during the first half of 1990 is reported. Convergence data measured during the first phase of the project will be reported in the final report of phase I, issued mid 1991. Convergence measurement devices have been removed from the borehole and are temporarily stored to be used in a new 600 m deep borehole to be drilled begin 1992. The experiment with the Variable Pressure Device (VPD) started March 1991. During first 2 months it has been shown that low pressure build-up due to convergence could not be registrated. The system, which is basically designed for higher depths and thus higher convergence rates, showed more hysteresis than expected on the applied pressure levels. The measuring programme defined earlier is therefore modified. It will be concentrated first on high pressure changes which are started July 1991. A preliminary conclusion of the first pressure step is that the in-situ measured elasticity of salt is significantly lower than elasticity measured in the laboratory on small samples. More detailed analysis of the measurement results and repeated pressure steps are necessary to verify this conclusion. The predictive analyses planned for the first half of 1991 could not be made since the measuring programme was modified. FE-analyses have been concentrated on interpretation of the measurement result during the first months. Influence of the heat production of the exothermally hardening salt concrete in the behaviour of the borehole is analysed in detail. Predictions of the modified measuring programme (topical report) will be reported later. (author). 4 refs.; 3 figs

  8. Annual report on reactor safety research projects sponsored by the Ministry of Economics and Technology of the Federal Republic of Germany. Reporting period 2007. Progress report

    International Nuclear Information System (INIS)

    2007-01-01

    Within its competence for energy research the Federal Ministry of Economics and Technology (BMWi) sponsors research projects on the safety of nuclear power plants currently in operation. The objective of these projects is to provide fundamental knowledge, procedures and methods to contribute to realistic safety assessments of nuclear installations, to the further development of safety technology and to make use of the potential of innovative safety-related approaches. The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, by order of the BMWi, continuously issues information on the status of such research projects by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work. The progress reports are published by the Research Management Division of GRS. The reports as of the year 2000 are available in the Internet-based information system on results and data of reactor safety research (http://www.grs-fbw.de). The compilation of the reports is classified according to the classification system 'Joint Safety Research Index (JSRI)'. The reports are arranged in sequence of their project numbers. It has to be pointed out that the authors of the reports are responsible for the contents of this compilation. The BMWi does not take any responsibility for the correctness, exactness and completeness of the information nor for the observance of private claims of third parties. (orig.)

  9. Detection of irradiated constituents in processed food with complex lipid matrices. Results of a research project of Baden-Wuerttemberg

    International Nuclear Information System (INIS)

    Hartmann, M.; Ammon, J.; Berg, H.

    1999-01-01

    The detection of irradiated constituents in processed food with a complex lipid matrix can be adversely affected by two conditions. The small amounts of radiation-induced hydrocarbons are diluted by the fat matrix of the food, or there are substances accompanying the lipids in the matrix and thus make the analysis more difficult. In those cases, sample preparation alone by means of Florisil SPE (solid-phase extraction) is not enough and requires additional, subsequent SPE argentation chromatography of the Florisil eluate, as this latter analytical method permits reliable detection down to very small amounts of irradiated, fat-containing constituents even in a complex lipid matrix. SPE-Florisil/argentation chromatography detects and selects radiation-induced hydrocarbons in a complex lipid matrix, so that detection of irradiation at even very low doses down to 0.025 kGy is possible. The method described is highly sensitive, inexpensive, and easy to apply. It efficiently substitutes such complex preparation or measuring methods as SFE-GC/MS or LC-GC/MS. This highly sensitive testing method for detection of food irradiation can be carried out in almost any analytical laboratory. (orig./CB) [de

  10. Plan and reports of coupled irradiation (JRR-3 and JOYO of research reactors) and hot facilities work (WASTEF, JMTR-HL, MMF and FMF). R and D project on irradiation damage management technology for structural materials of long-life nuclear plant

    International Nuclear Information System (INIS)

    Matsui, Yoshinori; Yamamoto, Masaya; Yoshitake, Tsunemitsu; Yoshikawa, Katsunori; Iwamatsu, Shigemi; Ichikawa, Shoichi; Yamagata, Ichiro; Soga, Tomonori; Yonekawa, Minoru; Kitamura, Ryoichi; Miyake, Osamu; Takahashi, Hiroyuki; Ishikawa, Kazuyoshi; Kikuchi, Taiji; Usami, Koji; Endo, Shinya; Ichise, Kenichi; Numata, Masami; Onozawa, Atsushi; Aizawa, Masao; Kusunoki, Tsuyoshi; Nakata, Masahito; Abe, Kazuyuki; Ito, Kazuhiro; Takaya, Shigeru; Nagae, Yuji; Wakai, Eiichi; Aoto, Kazumi

    2010-03-01

    'R and D Project on Irradiation Damage Management Technology for Structural Materials of Long-life Nuclear Plant' was carried out from FY2006 in a fund of a trust enterprise of the Ministry of Education, Culture, Sports, Science and Technology. The coupled irradiations or single irradiation by JOYO fast reactor and JRR-3 thermal reactor were performed for about two years. The irradiation specimens are very important materials to establish of 'Evaluation of Irradiation Damage Indicator' in this research. For the acquisition of the examination specimens irradiated by the JOYO and JRR-3, we summarized about the overall plan, the work process and the results for the study to utilize these reactors and some facilities of hot laboratory (WASTEF, JMTR-HL, MMF and FMF) of the Oarai Research and Development Center and the Nuclear Science Research Institute in the Japan Atomic Energy Agency. (author)

  11. Identification of biomarkers of radioresponse and subsequent progression towards lung cancer in normal human bronchial epithelial cells after HZE particle irradiation

    Science.gov (United States)

    Story, Michael; Ding, Liang-Hao; Park, Seongmi; Minna, John

    Using variants of a non-oncogenically immortalized human bronchial epithelial cell line HBEC3-KT, we have examined global gene expression patterns after low and high LET irradiation up to 24h post-IR. Using supervised analyses we have identified 427 genes whoes expression can be used to discriminate the cellular response to γ-vs Si or Fe particles even when the biological outcome, cell death, is equivalent. Furthermore, genetic background also determines gene expression response. When HBEC3-KT is compared to the HBEC3-KT cells line where mutant k-RAS is over-expressed and p53 has been knocked down, HBEC-3KTr53, principal component analysis clearly shows that the response of each cell resides in a different 3-D space, that is, basal gene expression patterns as well as the gene expression response are unique to each cell type. Using regression analysis to examine these 427 genes show clusters of genes whose temporal expression patterns are the same and which are unique to a given radiation type. Ultimately, this approach will allow for the interrogation of gene promoters to identify response elements that drive how cells respond to different radiation types. We are extending our examination to O particles and are now examining gene expression as a function of beam quality. We have made substantial progress in the determination of cellular transformation by HZE particles for these cell lines. (Transformation as defined by the ability to grow in soft agar.) For HBEC-3KT, the spontaneous transformation frequency is about 10- 7.ExposuretoeitherF eorSiparticlesinc KT r53celllinedidnotshowanyincreaseintransf ormationf requencyaf terdosesof upto1Gy, however, thesp 3KT.W ehavenowisolatedover160individualf ocithatf ormedinsof tagarf romcellculturesthatwereirradia termcultureandthenre-introducedintosof tagartoassurethattheabilitytogrowinsof tagarisclonal.T odatew 30 With these cell isolates in hand we will begin to determine tumorigenicity by subcutaneous injections in nude

  12. Wholesomeness data on irradiated food

    International Nuclear Information System (INIS)

    1973-01-01

    There is no item of more primary importance to the welfare of the human race than food. It has long been realized that even small increases in the quality and/or quantity of food mean great benefits to people everywhere, particularly to those who are undernourished or on the threshold of starvation. Therefore, the application of food preservation technology to prevent food losses has become a major factor in solving the world's food problems. Some of the chemical additives used to preserve food have caused harmful effects on the well-being of the consumer, but the newly-developing commercial treatment of a number of food products with low doses of ionizing radiation has been shown to be technologically advantageous and economically viable.The Food Preservation Section of the Joint FA O/lAEA Division decided to set up a data system whereby wholesomeness information on irradiated food can be easily obtained and disseminated by means of publication. The data will be related to toxicological safety, nutritive value and microbial innocuity. To do this the Division has sent a questionnaire to institutes and scientists involved in programmes dealing with wholesomeness of irradiated food, requesting them to provide information on investigations already completed, on those which are currently in progress and on programmes projected for the future. Based on the responses received, a list of wholesomeness investigations recently carried out in Member Countries on different food items, can be found. Summarily it can be stated that the results from these investigations do not indicate any detrimental effects on health. Detailed data will be published periodically by the International Project in the Field of Food Irradiation in 'Food Irradiation Information'. The project has been established under the auspices of FAO, IAEA and OECD (NEA) with 22 countries at present contributing financially to the Project

  13. Asotin Creek instream habitat alteration projects : habitat evaluation, adult and juvenile habitat utilization and water temperature monitoring : 2001 progress report

    International Nuclear Information System (INIS)

    Bumgarner, Joseph D.

    2002-01-01

    projects to improve fish habitat. In 1998, the ACCD identified the need for a more detailed analysis of these instream projects to fully evaluate their effectiveness at improving fish habitat. Therefore, ACCD contracted with WDFW's Snake River Lab (SRL) to take pre- and post-construction measurements of the habitat (i.e., pools, LOD, width, depth) at each site, and to evaluate fish use within some of the altered sites. These results have been published annually as progress reports to the ACCD (Bumgarner et al. 1999, Wargo et al. 2000, and Bumgarner and Schuck 2001). The ACCD also contracted with the WDFW SRL to conduct other evaluation and monitoring in the stream such as: (1) conduct snorkel surveys at habitat alteration sites to document fish usage following construction, (2) deploy temperature monitors throughout the basin to document summer water temperatures, and (3) attempt to document adult fish utilization by documenting the number of steelhead redds associated with habitat altered areas. This report provides a summary of pre-construction measurements taken on three proposed Charley Creek habitat sites during 2001, two sites in main Asotin Creek, and one site in George Creek, a tributary that enters in the lower Asotin Creek basin. Further, it provides a comparison of measurements taken pre- and post-construction on three 1999 habitat sites taken two years later, but at similar river flows. It also presents data collected from snorkel surveys, redd counts, and temperature monitoring

  14. Irradiation to control Vibrio infection from consumption of raw seafood and fresh produce. Results of a co-ordinated research project

    International Nuclear Information System (INIS)

    2001-04-01

    Vibrio spp. comprises an important group of pathogenic bacteria in food that often causes human illness and even death when the contaminated food is consumed raw or improperly cooked. The most dangerous member of this group, the El Tor strain of V. cholerae, was responsible for the cholera pandemic which started in Peru in 1991 and spread to nearby countries, resulting in hundreds of thousands of cases and thousands of deaths. Recognizing the role of irradiation to ensure the microbiological safety of food, the Pan American Health Organization of the World Health Organization and the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture jointly sponsored a Co-ordinated Research Project (CRP) on the Use of Irradiation as a Public Health Intervention Measure to Control Foodborne Diseases in Latin America and the Caribbean, to assess the efficacy of this technology for food protection. The CRP was initiated in 1993 and concluded in 1998. The results of this CRP demonstrated that irradiation is effective for ensuring the microbiological safety of food naturally contaminated by Vibrio spp. This process offers unique benefits for decontamination of seafood, often contaminated with this group of aquatic bacteria at the source, and fresh vegetables that may be contaminated during production and handling, especially when these products are consumed raw or not thoroughly cooked. Because of the sensitivity of this group of bacteria to radiation, the dose required to ensure microbiological safety of food against them is not more than 1 kGy. The CRP also generated data on the effectiveness of irradiation to control infection by pork tapeworm (Taenia solium metacestode). However, the results of these studies were not conclusive enough for publication. This publication presents the research results reported at the final Research Co-ordination meeting on this CRP held in Havana, Cuba, 16-20 November 1998

  15. Irradiation to control Vibrio infection from consumption of raw seafood and fresh produce. Results of a co-ordinated research project

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-04-01

    Vibrio spp. comprises an important group of pathogenic bacteria in food that often causes human illness and even death when the contaminated food is consumed raw or improperly cooked. The most dangerous member of this group, the El Tor strain of V. cholerae, was responsible for the cholera pandemic which started in Peru in 1991 and spread to nearby countries, resulting in hundreds of thousands of cases and thousands of deaths. Recognizing the role of irradiation to ensure the microbiological safety of food, the Pan American Health Organization of the World Health Organization and the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture jointly sponsored a Co-ordinated Research Project (CRP) on the Use of Irradiation as a Public Health Intervention Measure to Control Foodborne Diseases in Latin America and the Caribbean, to assess the efficacy of this technology for food protection. The CRP was initiated in 1993 and concluded in 1998. The results of this CRP demonstrated that irradiation is effective for ensuring the microbiological safety of food naturally contaminated by Vibrio spp. This process offers unique benefits for decontamination of seafood, often contaminated with this group of aquatic bacteria at the source, and fresh vegetables that may be contaminated during production and handling, especially when these products are consumed raw or not thoroughly cooked. Because of the sensitivity of this group of bacteria to radiation, the dose required to ensure microbiological safety of food against them is not more than 1 kGy. The CRP also generated data on the effectiveness of irradiation to control infection by pork tapeworm (Taenia solium metacestode). However, the results of these studies were not conclusive enough for publication. This publication presents the research results reported at the final Research Co-ordination meeting on this CRP held in Havana, Cuba, 16-20 November 1998.

  16. Progress of JT-60SA Project: EU-JA joint efforts for assembly and fabrication of superconducting tokamak facilities and its research planning

    Energy Technology Data Exchange (ETDEWEB)

    Shirai, Hiroshi, E-mail: shirai.hiroshi@jaea.go.jp [JT-60SA Project Team, Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan); Barabaschi, Pietro [JT-60SA EU-Home Team, Fusion for Energy, Boltsmannstr 2, Garching 85748 (Germany); Kamada, Yutaka [JT-60SA JA-Home Team, Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan)

    2016-11-01

    Highlights: • JT-60SA Project is promoted under the BA Agreement and JA national programme. • JT-60SA is designed to operate in break-even equivalent condition for a long period. • JT-60SA Project supports and complements the ITER project, and promotes DEMO design. • Fabrication of JT-60SA components and assembly in Naka are steadily going on. • JT-60SA Research Plan has been developed jointly by EU and JA fusion communities. - Abstract: Aiming at supporting the early realization of fusion energy, the JT-60SA Project has shown steady progress for several years toward the first plasma in 2019 under the dual frameworks: the Satellite Tokamak Programme of the Broader Approach Agreement between EU and Japan, and the Japanese national programme. JT-60SA is a superconducting tokamak designed to operate in break-even equivalent conditions for a long pulse duration (typically 100 s) with a maximum plasma current of 5.5 MA. A variety of plasma control capabilities enable JT-60SA to contribute directly to the ITER project and also to DEMO by addressing key engineering and physics issues for advanced plasma operation. Design and fabrication of JT-60SA components, shared by the EU and Japan, started in 2007. Assembly in the torus hall started in January 2013, and welding work of the vacuum vessel sectors (seven 40° sectors and two 30° sectors) is currently ongoing on the cryostat base. Other components such as TF coils, PF coils, power supplies, cryogenic system, cryostat vessel, thermal shields and so on were or are being delivered to the Naka site for installation, assembly and commissioning. This paper gives technical progress on fabrication, installation and assembly of tokamak components and ancillary systems, as well as progress of the JT-60SA Research Plan being developed jointly by European and Japanese fusion communities.

  17. Annual report on Reactor Safety Research Projects sponsored by the Ministry of Economics and Technology of the Federal Republic of Germany. Reporting period 1999. Progress report

    International Nuclear Information System (INIS)

    2000-01-01

    Within its competence for energy research, the Bundesministerium fuer Wirtschaft und Technologie (BMWi) (Federal Ministry of Economics and Technology) sponsors investigations into the safety of nuclear power plants. The objective of these investigations is to provide fundamental knowledge, procedures and methods to contribute to realistic safety assessments of nuclear installations, to the further development of safety technology and to make use of the potential of innovative safety-related approaches. The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, by order of the BMWi, continuously issues information on the status of such investigations by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work and are published by the Research Management Division of GRS within the framework of general information on the progress in reactor safety research. The compilation of the reports is classified according to the classification system ''Joint Safety Research Index'' of the CEC (commission of the European communities). The reports are arranged in sequence of their project numbers. (orig.)

  18. Annual report on reactor safety research projects sponsored by the Ministry of Economics and Labour of the Federal Republic of Germany. Reporting period 2003. Progress report

    International Nuclear Information System (INIS)

    2003-01-01

    The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, by order of the BMWi, continuously issues information on the status of the investigations into the safety of nuclear power plants by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work and are published by the Research Management Division of GRS within the framework of general information on the progress in reactor safety research. The compilation of the reports is classified according to general topics related to reactor safety research. Further, use is made of the classification system ''Joint Safety Research Index'' of the CEC (commission of the european communities). The reports are arranged in sequence of their project numbers

  19. AECL's progress in DUPIC fuel development

    International Nuclear Information System (INIS)

    Sullivan, J.D.; Ryz, M.A.; Lee, J.W.

    1997-01-01

    Previous papers described progress in choosing a fabrication route for the DUPIC (Direct Use of Spent PWR Fuel in CANDU) fuel cycle [1], details of the OREOX (Oxidation Reduction of Oxide fuel) process, and preliminary results of out-cell and small-scale in-cell experiments [2]. AECL's project to develop the DUPIC fuel cycle has now progressed to the stage of fabricating DUPIC fuel elements for irradiation testing in a research reactor. Because of the high radiation fields around the spent PWR fuel, all work is being done in hot cells. The equipment used for fabrication of the DUPIC fuel elements is described in this paper. The commissioning, in-cell installation and current status of the fabrication process are also described and plans for the completion of this phase of the DUPIC project are outlined. The goal of this phase of the project is demonstration of the technical feasibility of the DUPIC fuel cycle. (author)

  20. Chronic progressive multiple sclerosis

    International Nuclear Information System (INIS)

    Buffoli, A.; Micheletti, E.; Capra, R.; Mattioli, F.; Marciano', N.

    1991-01-01

    A long-lasting immunological suppression action seems to be produced by total lymphoid irradiation; some authors emphasize the favorable effect of this treatment on chronic progressive multiple sclerosis. In order to evaluate the actual role of TLI, 6 patients affected with chronic progressive multiple sclerosis were submitted to TLI with shaped and personalized fields at the Istituto del Radio, University of Brescia, Italy. The total dose delivered was 19.8 Gy in 4 weeks, 1.8 Gy/day, 5d/w; a week elapsed between the first and the second irradiation course. Disability according to Kurtzke scale was evaluated, together with blood lymphocyte count and irradiation side-effects, over a mean follow-up period of 20.8 months (range: 13-24). Our findings indicate that: a) disease progression was not markedly reduced by TLI; b) steroid hormones responsivity was restored after irradiation, and c) side-effects were mild and tolerable