WorldWideScience

Sample records for investigating surety methodologies

  1. Investigating surety methodologies for cognitive systems.

    Energy Technology Data Exchange (ETDEWEB)

    Caudell, Thomas P. (University of New Mexico, Albuquerque, NM); Peercy, David Eugene; Mills, Kristy (University of New Mexico, Albuquerque, NM); Caldera, Eva (University of New Mexico, Albuquerque, NM)

    2006-11-01

    Advances in cognitive science provide a foundation for new tools that promise to advance human capabilities with significant positive impacts. As with any new technology breakthrough, associated technical and non-technical risks are involved. Sandia has mitigated both technical and non-technical risks by applying advanced surety methodologies in such areas as nuclear weapons, nuclear reactor safety, nuclear materials transport, and energy systems. In order to apply surety to the development of cognitive systems, we must understand the concepts and principles that characterize the certainty of a system's operation as well as the risk areas of cognitive sciences. This SAND report documents a preliminary spectrum of risks involved with cognitive sciences, and identifies some surety methodologies that can be applied to potentially mitigate such risks. Some potential areas for further study are recommended. In particular, a recommendation is made to develop a cognitive systems epistemology framework for more detailed study of these risk areas and applications of surety methods and techniques.

  2. Achieving strategic surety for high consequence software

    Energy Technology Data Exchange (ETDEWEB)

    Pollock, G.M.

    1996-09-01

    A strategic surety roadmap for high consequence software systems under the High Integrity Software (HIS) Program at Sandia National Laboratories guides research in identifying methodologies to improve software surety. Selected research tracks within this roadmap are identified and described detailing current technology and outlining advancements to be pursued over the coming decade to reach HIS goals. The tracks discussed herein focus on Correctness by Design, and System Immunology{trademark}. Specific projects are discussed with greater detail given on projects involving Correct Specification via Visualization, Synthesis, & Analysis; Visualization of Abstract Objects; and Correct Implementation of Components.

  3. 19 CFR 113.35 - Individual sureties.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Individual sureties. 113.35 Section 113.35 Customs... CUSTOMS BONDS Principals and Sureties § 113.35 Individual sureties. (a) Number required. If individuals...) Qualifications to act as surety—(1) Residency and citizenship. Each individual surety on a Customs bond must be...

  4. A surety engineering framework to reduce cognitive systems risks.

    Energy Technology Data Exchange (ETDEWEB)

    Caudell, Thomas P. (University of New Mexico, Albuquerque, NM); Peercy, David Eugene; Caldera, Eva O. (University of New Mexico, Albuquerque, NM); Shaneyfelt, Wendy L.

    2008-12-01

    Cognitive science research investigates the advancement of human cognition and neuroscience capabilities. Addressing risks associated with these advancements can counter potential program failures, legal and ethical issues, constraints to scientific research, and product vulnerabilities. Survey results, focus group discussions, cognitive science experts, and surety researchers concur technical risks exist that could impact cognitive science research in areas such as medicine, privacy, human enhancement, law and policy, military applications, and national security (SAND2006-6895). This SAND report documents a surety engineering framework and a process for identifying cognitive system technical, ethical, legal and societal risks and applying appropriate surety methods to reduce such risks. The framework consists of several models: Specification, Design, Evaluation, Risk, and Maturity. Two detailed case studies are included to illustrate the use of the process and framework. Several Appendices provide detailed information on existing cognitive system architectures; ethical, legal, and societal risk research; surety methods and technologies; and educing information research with a case study vignette. The process and framework provide a model for how cognitive systems research and full-scale product development can apply surety engineering to reduce perceived and actual risks.

  5. Toward an energy surety future.

    Energy Technology Data Exchange (ETDEWEB)

    Tatro, Marjorie L.; Jones, Scott A.; Covan, John Morgan; Kuswa, Glenn W.; Menicucci, David F.; Robinett, Rush D. III (.; )

    2005-10-01

    Because of the inevitable depletion of fossil fuels and the corresponding release of carbon to the environment, the global energy future is complex. Some of the consequences may be politically and economically disruptive, and expensive to remedy. For the next several centuries, fuel requirements will increase with population, land use, and ecosystem degradation. Current or projected levels of aggregated energy resource use will not sustain civilization as we know it beyond a few more generations. At the same time, issues of energy security, reliability, sustainability, recoverability, and safety need attention. We supply a top-down, qualitative model--the surety model--to balance expenditures of limited resources to assure success while at the same time avoiding catastrophic failure. Looking at U.S. energy challenges from a surety perspective offers new insights on possible strategies for developing solutions to challenges. The energy surety model with its focus on the attributes of security and sustainability could be extrapolated into a global energy system using a more comprehensive energy surety model than that used here. In fact, the success of the energy surety strategy ultimately requires a more global perspective. We use a 200 year time frame for sustainability because extending farther into the future would almost certainly miss the advent and perfection of new technologies or changing needs of society.

  6. 19 CFR 113.37 - Corporate sureties.

    Science.gov (United States)

    2010-04-01

    ... under laws of the State of __, authorized to conduct a surety business in the State of __, and having... company incorporated under the laws of the State of __ and having its principal place of business at... effect on the close of business on the date requested provided the corporate surety power of attorney is...

  7. 13 CFR 115.20 - Insolvency of Surety.

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Insolvency of Surety. 115.20 Section 115.20 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION SURETY BOND GUARANTEE Provisions for All Surety Bond Guarantees § 115.20 Insolvency of Surety. (a) Successor in interest. If a...

  8. Avoiding surety contracts in bankruptcy procedure

    Directory of Open Access Journals (Sweden)

    Hiber Dragor

    2015-01-01

    Full Text Available Serbia's courts jurisprudence has divergent attitudes with respect to the dilemma whether a surety contract represents a contract without consideration, which may be avoided once the guarantor is subject to bankruptcy procedure without any additional conditions, or an onerous contract. Whether a surety contract is an onerous one has anyhow been disputed in the legal theory. One school of thought considers this contract as non-onerous one, since vis-a-vis guarantor's obligation no benefit to be expected from the other contractual party (i. e. creditor exists. The other school of thought understands surety (almost always as an onerous contract bearing in mind that the guarantor who enters into this contract does not have intentio liberalis. There are numerous and nuanced views based on analyses of the relation between a guarantor and a debtor focused on the argument that surety is a contract without consideration if intentio liberalis existed vis-a-vis main debtor rather than vis-a-vis creditor. Our legal literature did not pay much attention to that issue until recently. In a rare text dedicated to it the author's basic standpoint is that surety represents a contract without consideration. An exception, depending on the circumstances of the case, could be surety given by a parent company for the obligation of a subsidiary, provided the former reasonably expected a benefit in terms of an increase in the value of shares. Commercial courts followed such reasoning. In this article an opposite stance has been argued. Namely, the onerousness of surety must be assessed based on the relation between the guarantor and the main debtor rather than between the guarantor and the creditor. As a rule, surety is an onerous contract because the guarantor expects to collect from the debtor through subrogation the amount he paid to the creditor; exceptionally, surety may be a non-onerous contract if intentio liberalis existed vis-a-vis main debtor. However, this

  9. A Methodology for Investigating Adaptive Postural Control

    Science.gov (United States)

    McDonald, P. V.; Riccio, G. E.

    1999-01-01

    Our research on postural control and human-environment interactions provides an appropriate scientific foundation for understanding the skill of mass handling by astronauts in weightless conditions (e.g., extravehicular activity or EVA). We conducted an investigation of such skills in NASA's principal mass-handling simulator, the Precision Air-Bearing Floor, at the Johnson Space Center. We have studied skilled movement-body within a multidisciplinary context that draws on concepts and methods from biological and behavioral sciences (e.g., psychology, kinesiology and neurophysiology) as well as bioengineering. Our multidisciplinary research has led to the development of measures, for manual interactions between individuals and the substantial environment, that plausibly are observable by human sensory systems. We consider these methods to be the most important general contribution of our EVA investigation. We describe our perspective as control theoretic because it draws more on fundamental concepts about control systems in engineering than it does on working constructs from the subdisciplines of biomechanics and motor control in the bio-behavioral sciences. At the same time, we have attempted to identify the theoretical underpinnings of control-systems engineering that are most relevant to control by human beings. We believe that these underpinnings are implicit in the assumptions that cut across diverse methods in control-systems engineering, especially the various methods associated with "nonlinear control", "fuzzy control," and "adaptive control" in engineering. Our methods are based on these theoretical foundations rather than on the mathematical formalisms that are associated with particular methods in control-systems engineering. The most important aspects of the human-environment interaction in our investigation of mass handling are the functional consequences that body configuration and stability have for the pick up of information or the achievement of

  10. A novel methodology to investigate isotopic biosignatures

    Science.gov (United States)

    Horner, T. J.; Lee, R. B. Y.; Henderson, G. M.; Rickaby, R. E. M.

    2012-04-01

    An enduring goal of trace metal isotopic studies of Earth History is to find isotopic 'fingerprints' of life or of life's individual physiochemical processes. Generally, such signatures are sought by relating an isotopic effect observed in controlled laboratory conditions or a well-characterized environment to a more complex system or the geological record. However, such an approach is ultimately limited because life exerts numerous isotopic fractionations on any one element so it is hard to dissect the resultant net fractionation into its individual components. Further, different organisms, often with the same apparent cellular function, can express different isotopic fractionation factors. We have used a novel method to investigate the isotopic fractionation associated with a single physiological process-enzyme specific isotopic fractionation. We selected Cd isotopes since only one biological use of Cd is known, CdCA (a Cd/Zn carbonic anhydrase from the coastal diatom T. Weissflogii). Thus, our investigation can also inform the long standing mystery as to why this generally toxic element appears to have a nutrient-like dissolved isotopic and concentration profile in the oceans. We used the pET-15b plasmid to insert the CdCA gene into the E. coli genome. There is no known biochemical function for Cd in E. coli, making it an ideal vector for studying distinct physiological processes within a single organism. The uptake of Cd and associated isotopic fractionation was determined for both normal cells and those expressing CdCA. It was found that whole cells always exhibited a preference for the light isotopes of Cd, regardless of the expression of CdCA; adsorption of Cd to cell surfaces was not seen to cause isotopic fractionation. However, the cleaning procedure employed exerted a strong control on the observed isotopic composition of cells. Using existing protein purification techniques, we measured the Cd isotopic composition of different subcellular fractions of E

  11. 27 CFR 24.149 - Corporate surety.

    Science.gov (United States)

    2010-04-01

    ... OF THE TREASURY LIQUORS WINE Establishment and Operations Bonds and Consents of Surety § 24.149.... Copies may be obtained from the Audit Staff, Financial Management Service, Department of the Treasury...

  12. 48 CFR 828.203 - Acceptability of individual sureties.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Acceptability of individual sureties. 828.203 Section 828.203 Federal Acquisition Regulations System DEPARTMENT OF VETERANS... Acceptability of individual sureties. ...

  13. 13 CFR 115.17 - Minimization of Surety's Loss.

    Science.gov (United States)

    2010-01-01

    ... and collateral—(1) Requirements. The Surety must take all reasonable action to minimize risk of Loss... indemnity agreement must be secured by such collateral as the Surety or SBA finds appropriate. Indemnity...

  14. 48 CFR 1328.203 - Acceptability of individual sureties.

    Science.gov (United States)

    2010-10-01

    ... individual sureties. 1328.203 Section 1328.203 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE... Acceptability of individual sureties. (a) Contracting officers shall obtain the opinion of the Procurement Counsel as to the adequacy of the documents pledging the assets of an individual surety prior to accepting...

  15. 48 CFR 1328.203-7 - Exclusion of individual sureties.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Exclusion of individual sureties. 1328.203-7 Section 1328.203-7 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE... Exclusion of individual sureties. The designee authorized to exclude an individual from acting as a surety...

  16. 48 CFR 28.203 - Acceptability of individual sureties.

    Science.gov (United States)

    2010-10-01

    ... individual sureties. 28.203 Section 28.203 Federal Acquisition Regulations System FEDERAL ACQUISITION... Acceptability of individual sureties. (a) An individual surety is acceptable for all types of bonds except position schedule bonds. The contracting officer shall determine the acceptability of individuals proposed...

  17. 13 CFR 115.16 - Determination of Surety's Loss.

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Determination of Surety's Loss. 115.16 Section 115.16 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION SURETY BOND... generally accepted accounting principles; and (2) Amounts actually paid by the Surety for court costs and...

  18. 27 CFR 72.24 - Corporate surety bonds.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Corporate surety bonds. 72... Seizures and Forfeitures § 72.24 Corporate surety bonds. (a) Corporate surety bonds may be given only with... obtained from the Audit Staff, Bureau of Government Financial Operations, Department of the Treasury...

  19. The Methodology of Investigation of Intercultural Rhetoric applied to SFL

    Directory of Open Access Journals (Sweden)

    David Heredero Zorzo

    2016-12-01

    Full Text Available Intercultural rhetoric is a discipline which studies written discourse among individuals from different cultures. It is a very strong field in the Anglo-Saxon scientific world, especially referring to English as a second language, but in Spanish as a foreign language it is not as prominent. Intercultural rhetoric has provided applied linguistics with important methods of investigation, thus applying this to SFL could introduce interesting new perspectives on the subject. In this paper, we present the methodology of investigation of intercultural rhetoric, which is based on the use of different types of corpora for analysing genders, and follows the precepts of tertium comparationis. In addition, it uses techniques of ethnographic investigation. The purpose of this paper is to show the applications of this methodology to SFL and to outline future investigations in the same field.

  20. 13 CFR 115.60 - Selection and admission of PSB Sureties.

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Selection and admission of PSB Sureties. 115.60 Section 115.60 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION SURETY BOND GUARANTEE Preferred Surety Bond (PSB) Guarantees § 115.60 Selection and admission of PSB Sureties. (a) Selection of PSB Sureties. SBA's selection o...

  1. The Use of Object-Oriented Analysis Methods in Surety Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Craft, Richard L.; Funkhouser, Donald R.; Wyss, Gregory D.

    1999-05-01

    Object-oriented analysis methods have been used in the computer science arena for a number of years to model the behavior of computer-based systems. This report documents how such methods can be applied to surety analysis. By embodying the causality and behavior of a system in a common object-oriented analysis model, surety analysts can make the assumptions that underlie their models explicit and thus better communicate with system designers. Furthermore, given minor extensions to traditional object-oriented analysis methods, it is possible to automatically derive a wide variety of traditional risk and reliability analysis methods from a single common object model. Automatic model extraction helps ensure consistency among analyses and enables the surety analyst to examine a system from a wider variety of viewpoints in a shorter period of time. Thus it provides a deeper understanding of a system's behaviors and surety requirements. This report documents the underlying philosophy behind the common object model representation, the methods by which such common object models can be constructed, and the rules required to interrogate the common object model for derivation of traditional risk and reliability analysis models. The methodology is demonstrated in an extensive example problem.

  2. 40 CFR 280.98 - Surety bond.

    Science.gov (United States)

    2010-07-01

    ...: Performance Bond Date bond executed: Period of coverage: Principal: [legal name and business address of owner... “corporation”] State of incorporation (if applicable): Surety(ies): [name(s) and business address(es)] Scope of...) shall not be discharged by any payment or succession of payments hereunder, unless and until such...

  3. 46 CFR 540.6 - Surety bonds.

    Science.gov (United States)

    2010-10-01

    ... transportation. The requirements of Form FMC-132A, however, may be amended by the Commission in a particular case for good cause. (b) In the case of a surety bond which is to cover all passenger operations of the... shall be issued by a bonding company authorized to do business in the United States and acceptable to...

  4. THEORETICAL AND METHODOLOGICAL APPROACHES TO REGIONAL COMPETITION INVESTIGATION

    Directory of Open Access Journals (Sweden)

    A.I. Tatarkin

    2006-03-01

    Full Text Available The article is dedicated to theoretical-methodological issues of regional economy competitiveness investigation. Economic essence of regional competitiveness is analyzed, its definition is given. The factors that determine relations of competition on medium and macrolevels are proved. The basic differences between world-economical and inter-regional communications are formulated. The specific features of globalization processes as form of competitive struggle are considered.

  5. An investigation into creative design methodologies for textiles and fashion

    Science.gov (United States)

    Gault, Alison

    2017-10-01

    Understanding market intelligence, trends, influences and personal approaches are essential tools for design students to develop their ideas in textiles and fashion. Identifying different personal approaches including, visual, process-led or concept by employing creative methodologies are key to developing a brief. A series of ideas or themes start to emerge and through the design process serve to underpin and inform an entire collection. These investigations ensure that the design collections are able to produce a diverse range of outcomes. Following key structures and coherent stages in the design process creates authentic collections in textiles and fashion. A range of undergraduate students presented their design portfolios (180) and the methodologies employed were mapped against success at module level, industry response and graduate employment.

  6. 76 FR 416 - Application and Renewal Fees Imposed on Surety Companies and Reinsuring Companies Increase in...

    Science.gov (United States)

    2011-01-04

    ... Government for services performed relative to qualifying corporate sureties to write Federal business. These... notice should be directed to the Surety Bond Branch, Financial Accounting and Services Division...

  7. Investigating on the Methodology Effect when Evaluating Lucid Dream

    Directory of Open Access Journals (Sweden)

    Nicolas RIBEIRO

    2016-08-01

    Full Text Available Lucid dreaming (LD is a state of consciousness in which the dreamer is aware that he or she is dreaming and can possibly control the content of his or her dream. To investigate the LD prevalence among different samples, researchers have used different types of methodologies. With regard to retrospective self-report questionnaire, two ways of proceeding seem to emerge. In one case, a definition of LD is given to participants (During lucid dreaming, one is – while dreaming – aware of the fact that one is dreaming. It is possible to deliberately wake up, to control the dream action, or to observe passively the course of the dream with this awareness, while in the other instances, participants are presented separate questions targeting specific LD indicators (dream awareness and dream control.In the present study, we measured LD frequency in a sample of French student in order to investigate for possible disparities in LD frequency depending on the type of questionnaire as outlined above. Moreover, we also study links between the prevalence of LD as assessed respectively by each questionnaire with various factors such as Vividness of Mental Imagery and Parasomnia.Results revealed no significant difference between LD frequencies across questionnaires. For the questionnaire with definition (DefQuest, 81.05% of participants reported experience of LD once or more. Concerning the questionnaire based on LD indicators (AwarContQuest, 73.38% of participants reported having experienced LD once or more. However, with regard to the correlations analysis, links between LD prevalence and factors such as Vividness of Mental Imagery and Parasomnia, varied across questionnaires. This result is an argument suggesting that researchers should be careful when investigating links between LD and other factors. The type of methodology may influence findings on LD research. Further studies are needed to investigate on the methodology effect in LD research namely on the

  8. Progress on resolution of major surety issues

    International Nuclear Information System (INIS)

    Bell, C.R.; Boudreau, J.M.

    1985-01-01

    This paper presents a summary of the major surety issues (safety, environmental protection, sageguards, reliability, quality assurance) that have been identified during Phase I of the SP-100 Program and the progress that has been made in analyzing the most important of these issues in the context of the conceptual design effort. These issues have been identified as inadvertent criticality, toxic material release and dispersion, radiation exposure following end-of-life reentry, potential diversion of special nuclear material, failure to achieve end-of-life neutronic shutdown, and structural predictability for end-of-life re-entry or boost. Because of the complexity of these issues, a simplified conservative approach was taken during Phase I. Progress on these issues has been mainly in the area of increased understanding of the issues, identification of design features to resolve the issues, and quantitative evaluations of the surety characteristics of the various design concepts

  9. Investigating patients' experiences: methodological usefulness of interpretive interactionism.

    Science.gov (United States)

    Tower, Marion; Rowe, Jennifer; Wallis, Marianne

    2012-01-01

    To demonstrate the methodological usefulness of interpretive interactionism by applying it to the example of a study investigating healthcare experiences of women affected by domestic violence. Understanding patients' experiences of health, illness and health care is important to nurses. For many years, biomedical discourse has prevailed in healthcare language and research, and has influenced healthcare responses. Contemporary nursing scholarship can be developed by engaging with new ways of understanding therapeutic interactions with patients. Research that uses qualitative methods of inquiry is an important paradigm for nurses who seek to explain and understand or describe experiences rather than predict outcomes. Interpretive interactionism is an interpretive form of inquiry for conducting studies of social or personal problems that have healthcare policy implications. It puts the patient at the centre of the research process and makes visible the experiences of patients as they interact with the healthcare and social systems that surround them. Interpretive interactionism draws on concepts of symbolic interactionism, phenomenology and hermeneutics. Interpretive interactionism is a patient-centred methodology that provides an alternative way of understanding patients' experiences. It can contribute to policy and practice development by drawing on the perspectives and experiences of patients, who are central to the research process. It also allows research findings to be situated in and linked to healthcare policy, professional ethics and organisational approaches to care. Interpretive interactionism has methodological utility because it can contribute to policy and practice development by drawing on the perspectives and experiences of patients who are central to the research process. Interpretive interactionism allows research findings to be situated in and linked to health policy, professional ethics and organisational approaches to caring.

  10. Theoretical and methodological considerations to investigate school dropout

    Directory of Open Access Journals (Sweden)

    Román Hernández –Dávila

    2017-07-01

    Full Text Available This work offers an exhaustive analysis of different authors and studies– falling under general and methodological criteria – of the reasons responsible for school dropouts, predominantly in vulnerable areas. To do so it is necessary to reflect on the problem with the intention of identifying the contributing factors. In these situations, various elements come into play, ranging from the organization of education systems, application of public policies, social conditions, the individual’s situation, health, the psychological and emotional impact, as well as the cultural patterns that may in compass the minor’s family, student-teacher relationship and school management. As an addition, a series of useful proposals is offered in bringing about change in the educational sector, focused on the reducing of school dropouts. It is assumed that research about dropouts should be undertaken from a qualitative concept, with hermeneutical characteristics, that allow the phenomenon under study to be interpreted reliably. This methodological basis has ethnographic foundations since it requires the reviewing of specific aspects of the socio cultural context present in the factors subject to investigation. Works of this nature should identify the determinants of school dropouts in a specific line of inquiry, describe them, and generate a database that displays the indicators of the causes that create this phenomenon.

  11. 48 CFR 28.203-7 - Exclusion of individual sureties.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Exclusion of individual... Exclusion of individual sureties. (a) An individual may be excluded from acting as a surety on bonds... of protecting the Government. (b) An individual may be excluded for any of the following causes: (1...

  12. 48 CFR 828.203-7 - Exclusion of individual sureties.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Exclusion of individual... Exclusion of individual sureties. The DSPE may make the determinations referenced in FAR 28.203-7: (a) To exclude individuals from acting as surety on bonds; and (b) To accept bonds from individuals named on the...

  13. 48 CFR 53.301-28 - Affidavit of Individual Surety.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Affidavit of Individual Surety. 53.301-28 Section 53.301-28 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION (CONTINUED) CLAUSES AND FORMS FORMS Illustrations of Forms 53.301-28 Affidavit of Individual Surety. ER22MY03...

  14. 13 CFR 115.34 - Minimization of Surety's Loss.

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Minimization of Surety's Loss. 115.34 Section 115.34 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION SURETY BOND GUARANTEE... strategy in maximizing recovery. See also § 115.17(b). ...

  15. 31 CFR 223.6 - Requirements applicable to surety companies.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Requirements applicable to surety companies. 223.6 Section 223.6 Money and Finance: Treasury Regulations Relating to Money and Finance... BUSINESS WITH THE UNITED STATES § 223.6 Requirements applicable to surety companies. Every company now or...

  16. 19 CFR 141.41 - Surety on Customs bonds.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Surety on Customs bonds. 141.41 Section 141.41 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) ENTRY OF MERCHANDISE Powers of Attorney § 141.41 Surety on Customs bonds. Powers of...

  17. Using Q Methodology to Investigate Undergraduate Students' Attitudes toward the Geosciences

    Science.gov (United States)

    Young, Julia M.; Shepardson, Daniel P.

    2018-01-01

    Undergraduate students have different attitudes toward the geosciences, but few studies have investigated these attitudes using Q methodology. Q methodology allows the researcher to identify more detailed reasons for students' attitudes toward geology than Likert methodology. Thus this study used Q methodology to investigate the attitudes that 15…

  18. Overview of the joint US/Russia surety program in the Sandia National Laboratories Cooperative Measures Program

    International Nuclear Information System (INIS)

    Smith, R.E.; Vorontsova, O.S.; Blinov, I.M.

    1998-02-01

    Sandia National Laboratories has initiated many joint research and development projects with the two premier Russian nuclear laboratories, VNIIEF and VNIITF, (historically known as Arzamas-16 and Chelyabinsk-70) in a wide spectrum of areas. One of the areas in which critical dialogue and technical exchange is continuing to take place is in the realm of system surety. Activities primarily include either safety or security methodology development, processes, accident environment analyses and testing, accident data-bases, assessments, and product design. Furthermore, a continuing dialog has been established between the organizations with regard to developing a better understanding of how risk is perceived and analyzed in Russia versus that in the US. The result of such efforts could reduce the risk of systems to incur accidents or incidents resulting in high consequences to the public. The purpose of this paper is to provide a current overview of the Sandia surety program and its various initiatives with the Russian institutes, with an emphasis on the program scope and rationale. The historical scope of projects will be indicated. A few specific projects will be discussed, along with results to date. The extension of the joint surety initiatives to other government and industry organizations will be described. This will include the current status of a joint Sandia/VNIIEF initiative to establish an International Surety Center for Energy Intensive and High Consequence Systems and Infrastructures

  19. A theoretical and experimental investigation of propeller performance methodologies

    Science.gov (United States)

    Korkan, K. D.; Gregorek, G. M.; Mikkelson, D. C.

    1980-01-01

    This paper briefly covers aspects related to propeller performance by means of a review of propeller methodologies; presentation of wind tunnel propeller performance data taken in the NASA Lewis Research Center 10 x 10 wind tunnel; discussion of the predominent limitations of existing propeller performance methodologies; and a brief review of airfoil developments appropriate for propeller applications.

  20. Investigating precipitation changes of anthropic origin: data and methodological issues

    Science.gov (United States)

    de Lima, Isabel; Lovejoy, Shaun

    2017-04-01

    There is much concern about the social, environmental and economic impacts of climate change that could result directly from changes in temperature and precipitation. For temperature, the situation is better understood; but despite the many studies that have been already dedicated to precipitation, change in this process - that could be associated to the transition to the Anthropocene - has not yet been convincingly proven. A large fraction of those studies have been exploring temporal (linear) trends in local precipitation, sometimes using records over only a few decades; other fewer studies have been dedicated to investigating global precipitation change. Overall, precipitation change of anthropic origin has showed to be difficult to establish with high statistical significance and, moreover, different data and products have displayed important discrepancies; this is valid even for global precipitation. We argue that the inadequate resolution and length of the data commonly used, as well as methodological issues, are among the main factors limiting the ability to identify the signature of change in precipitation. We propose several ways in which one can hope to improve the situation - or at least - clarify the difficulties. From the point of view of statistical analysis, the problem is one of detecting a low frequency anthropogenic signal in the presence of "noise" - the natural variability (the latter includes both internal dynamics and responses to volcanic, solar or other natural forcings). A consequence is that as one moves to longer and longer time scales, fluctuations are increasingly averaged and at some point, the anthropogenic signal will stand out above the natural variability noise. This approach can be systematized using scaling fluctuation analysis to characterizing different precipitation scaling regimes: weather, macroweather, climate - from higher to lower frequencies; in the anthropocene, the macroweather regime covers the range of time scales

  1. 7 CFR 982.454 - Sureties acceptable to the Board.

    Science.gov (United States)

    2010-01-01

    ....454 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE HAZELNUTS... condition of accepting any surety, the Board may require such financial statements or other information...

  2. 27 CFR 17.103 - Bonds obtained from surety companies.

    Science.gov (United States)

    2010-04-01

    ... its liability, in terms upon the face of the bond, to a definite, specified amount. This amount shall... obtained from: Surety Bond Branch, Financial Management Service, Department of the Treasury, Washington, DC...

  3. Creation of security engineering programs by the Southwest Surety Institute

    Science.gov (United States)

    Romero, Van D.; Rogers, Bradley; Winfree, Tim; Walsh, Dan; Garcia, Mary Lynn

    1998-12-01

    The Southwest Surety Institute includes Arizona State University (ASU), Louisiana State University (LSU), New Mexico Institute of Mining and Technology (NM Tech), New Mexico State University (NMSU), and Sandia National Laboratories (SNL). The universities currently offer a full spectrum of post-secondary programs in security system design and evaluation, including an undergraduate minor, a graduate program, and continuing education programs. The programs are based on the methodology developed at Sandia National Laboratories over the past 25 years to protect critical nuclear assets. The programs combine basic concepts and principles from business, criminal justice, and technology to create an integrated performance-based approach to security system design and analysis. Existing university capabilities in criminal justice (NMSU), explosives testing and technology (NM Tech and LSU), and engineering technology (ASU) are leveraged to provide unique science-based programs that will emphasize the use of performance measures and computer analysis tools to prove the effectiveness of proposed systems in the design phase. Facility managers may then balance increased protection against the cost of implementation and risk mitigation, thereby enabling effective business decisions. Applications expected to benefit from these programs include corrections, law enforcement, counter-terrorism, critical infrastructure protection, financial and medical care fraud, industrial security, and border security.

  4. 75 FR 1683 - Application and Renewal Fees Imposed on Surety Companies and Reinsuring Companies; Increase in...

    Science.gov (United States)

    2010-01-12

    ... incurred by the Government for services performed relative to qualifying corporate sureties to write... concerning this notice should be directed to the Surety Bond Branch, Financial Accounting and Services...

  5. An Introduction to Architectural Surety(SM) Education

    Energy Technology Data Exchange (ETDEWEB)

    Matalucci, R.V.; Miyoshi, D.S.

    1998-09-01

    This report describes the Sandia activities in the developing field management approach to enhancing National Laboratories (Sandia) educational outreach of architectural and infrastructure surety, a risk the safety, security, and reliability of facilities, systems, and structures. It begins with a description of the field of architectural and infrastmcture surety, including Sandia's historical expertise and experience in nuclear weapons surety. An overview of the 1996 Sandia Workshop on Architectural SuretysM is then provided to reference the initiation of the various activities. This workshop established the need for a surety education program at the University level and recommended that Sandia develop the course material as soon as possible. Technical material was assembled and the course was offered at the University of New Mexico (UNM) during the 1997 spring semester. The bulk of this report accordingly summarizes the lecture material presented in this pioneering graduate-level course on Infrastructure Surety in the Civil Engineering Department at UNM. This groundbreaking class presented subject matter developed by experts from Sandia, and included additional information from guest lecturers from academia, government, and industry. Also included in this report are summaries of the term projects developed by the graduate students, an overview of the 1997 International Conference on Architectural Suretp: Assuring the Performance of Buildings and Injiastruchwes (co-sponsored by Sandia, the American Institute of Architects, and the American Society of Civil Engineers), and recommendations for further course work development. The U.S. Department of Energy provides support to this emerging field of architectural and infrastructure surety and recognizes its broad application to developing government, industry, and professional standards in the national interest.

  6. 19 CFR 113.39 - Procedure to remove a surety from Treasury Department Circular 570.

    Science.gov (United States)

    2010-04-01

    ... the surety company of the bond obligation(s). (b) Review by Headquarters. The Director, Border..., and Forfeitures Officer is unsatisfied with a surety company because the company has neglected or refused to pay a valid demand made on the surety company's bond or otherwise has failed to honor an...

  7. 29 CFR 453.21 - Interests held in agents, brokers, and surety companies.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 2 2010-07-01 2010-07-01 false Interests held in agents, brokers, and surety companies... LABOR-MANAGEMENT REPORTING AND DISCLOSURE ACT OF 1959 Qualified Agents, Brokers, and Surety Companies for the Placing of Bonds § 453.21 Interests held in agents, brokers, and surety companies. (a) Section...

  8. 29 CFR 2580.412-22 - Interests held in agents, brokers and surety companies.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Interests held in agents, brokers and surety companies... SECURITY ACT OF 1974 TEMPORARY BONDING RULES Qualified Agents, Brokers and Surety Companies for the Placing of Bonds § 2580.412-22 Interests held in agents, brokers and surety companies. Section 13(c...

  9. 29 CFR 2580.412-35 - Disqualification of agents, brokers and sureties.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Disqualification of agents, brokers and sureties. 2580.412...-35 Disqualification of agents, brokers and sureties. Since 13(c) is to be construed as disqualifying any agent, broker, surety or other company from having a bond placed through or with it, if the plan...

  10. Radioimmunoassay of somatostatin: methodological problems and physiological investigations

    International Nuclear Information System (INIS)

    Penman, E.; Wass, J.A.H.

    1981-01-01

    Somatostatin, a tetradecapeptide, has a wide distribution throughout the central nervous system and the gastrointestinal tract and a broad spectrum of biological actions. In order to investigate its various physiological roles in man, a radioimmunoassay was developed for somatostatin in human blood plasma, which is described here. This RIA was used to investigate possible factors influencing somatostatin secretion. Changes in somatin levels produced by changes in insulin, glucagon and growth hormone levels were studied via the response of plasma immunoreactive somatostatin to hormonal stimuli in normal man. The influence of fasting and food consumption was studied; and the site of origin of circulating immunoreactive somatostatin was investigated in patients. (Auth.)

  11. Methodological approach to crime scene investigation: the dangers of technology

    Science.gov (United States)

    Barnett, Peter D.

    1997-02-01

    The visitor to any modern forensic science laboratory is confronted with equipment and processes that did not exist even 10 years ago: thermocyclers to allow genetic typing of nanogram amounts of DNA isolated from a few spermatozoa; scanning electron microscopes that can nearly automatically detect submicrometer sized particles of molten lead, barium and antimony produced by the discharge of a firearm and deposited on the hands of the shooter; and computers that can compare an image of a latent fingerprint with millions of fingerprints stored in the computer memory. Analysis of populations of physical evidence has permitted statistically minded forensic scientists to use Bayesian inference to draw conclusions based on a priori assumptions which are often poorly understood, irrelevant, or misleading. National commissions who are studying quality control in DNA analysis propose that people with barely relevant graduate degrees and little forensic science experience be placed in charge of forensic DNA laboratories. It is undeniable that high- tech has reversed some miscarriages of justice by establishing the innocence of a number of people who were imprisoned for years for crimes that they did not commit. However, this papers deals with the dangers of technology in criminal investigations.

  12. A Novel Spectroscopic Methodology for the Investigation of Individual Bacillus Spores

    National Research Council Canada - National Science Library

    Alexander, Troy A; Pellegrino, Paul; Gillespie, James B

    2005-01-01

    A methodology has been developed for the investigation of bacterial spores. Specifically, this method has been used to probe the spore coat composition of two different Bacillus stearothermophilus variants...

  13. Computer surety: computer system inspection guidance. [Contains glossary

    Energy Technology Data Exchange (ETDEWEB)

    1981-07-01

    This document discusses computer surety in NRC-licensed nuclear facilities from the perspective of physical protection inspectors. It gives background information and a glossary of computer terms, along with threats and computer vulnerabilities, methods used to harden computer elements, and computer audit controls.

  14. 46 CFR Sec. 6 - Surety and form of bond.

    Science.gov (United States)

    2010-10-01

    ... called the “Agent”) or the United States of America, (hereafter called the “United States”), represented... rata. Fourth. After discovery and report to the Agent or the Director of any loss hereunder, the Agent... forms furnished by the Surety. Prior discovery and report to the Agent of such loss shall not affect the...

  15. A strategic surety roadmap for high consequence software

    Energy Technology Data Exchange (ETDEWEB)

    Pollock, G.M.; Dalton, L.J.

    1995-12-31

    A strategic surety roadmap for high consequence software systems developed under the High Integrity Software (HIS) Program at Sandia National Laboratories is presented. Selected research tracks are identified and described detailing current technology and outlining advancements to be pursued over the coming decade to reach HIS goals.

  16. Seniors Falls Investigative Methodology (SFIM): A Systems Approach to the Study of Falls in Seniors

    Science.gov (United States)

    Zecevic, Aleksandra A.; Salmoni, Alan W.; Lewko, John H.; Vandervoort, Anthony A.

    2007-01-01

    An in-depth understanding of human factors and human error is lacking in current research on seniors' falls. Additional knowledge is needed to understand why seniors are falling. The purpose of this article is to describe the adapting of the Integrated Safety Investigation Methodology (ISIM) (used for investigating transportation and industrial…

  17. 77 FR 14059 - Surety Companies Acceptable On Federal Bonds: Name, Address and Phone Number Change: Van Tol...

    Science.gov (United States)

    2012-03-08

    .... Department of the Treasury, Financial Management Service, Financial Accounting and Services Division, Surety... Carrico, Director, Financial Accounting and Services Division, Financial Management Service. [FR Doc. 2012..., Address and Phone Number Change: Van Tol Surety Company, Incorporated (NAIC 30279) AGENCY: Financial...

  18. 49 CFR 387.307 - Property broker surety bond or trust fund.

    Science.gov (United States)

    2010-10-01

    .... Evidence of a trust fund with a financial institution must be filed using the FMCSA's prescribed Form BMC... 49 Transportation 5 2010-10-01 2010-10-01 false Property broker surety bond or trust fund. 387.307... MINIMUM LEVELS OF FINANCIAL RESPONSIBILITY FOR MOTOR CARRIERS Surety Bonds and Policies of Insurance for...

  19. 32 CFR Appendix E to Part 623 - Surety Bond (DA Form 4881-3-R)

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 3 2010-07-01 2010-07-01 true Surety Bond (DA Form 4881-3-R) E Appendix E to Part 623 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY SUPPLIES AND EQUIPMENT LOAN OF ARMY MATERIEL Pt. 623, App. E Appendix E to Part 623—Surety Bond (DA Form 4881-3-R...

  20. 48 CFR 2928.204 - Alternatives in lieu of corporate or individual sureties.

    Science.gov (United States)

    2010-10-01

    ... corporate or individual sureties. 2928.204 Section 2928.204 Federal Acquisition Regulations System... Bonds 2928.204 Alternatives in lieu of corporate or individual sureties. Upon receipt of any of the... of the security and coordinate the retention of the security with the Chief Financial Officer...

  1. 19 CFR 24.3a - CBP bills; interest assessment; delinquency; notice to principal and surety.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false CBP bills; interest assessment; delinquency; notice to principal and surety. 24.3a Section 24.3a Customs Duties U.S. CUSTOMS AND BORDER PROTECTION....3a CBP bills; interest assessment; delinquency; notice to principal and surety. (a) Due date of CBP...

  2. 46 CFR 308.529 - Surety Bond B, Form MA-309.

    Science.gov (United States)

    2010-10-01

    ... Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Cargo Insurance Ii-Open Policy War Risk Cargo Insurance § 308.529 Surety Bond B, Form MA-309. An Assured who elects to substitute a surety bond for a collateral deposit fund shall submit Form MA-309...

  3. On New Means or New Forms of Investigation. A Methodological Proposal for Online Social Investigation through a Virtual Forum

    Directory of Open Access Journals (Sweden)

    Rubén Arriazu Muñoz

    2007-09-01

    Full Text Available Processes and instruments of communication have constituted an important object for Internet researchers, and have been investigated using qualitative methodologies in social research. The most common strategy has been to adapt orthodox instruments and procedures to the virtual context. In this paper I address the following questions in order to develop a framework for virtual research. Using a virtual forum as starting point, I ask: Is virtual research a new taxonomy or an extension of conventional social research techniques? Is virtual research located at the same level as face-to-face research? Is it a new communicational research form? This paper presents a methodological approach using virtual forums as tools where asynchronous communication flows. I analyze the use of virtual forums in interaction with the social context, and articulate the method that emerges from this fieldwork situation. URN: urn:nbn:de:0114-fqs0703374

  4. Research on statistical methodology to investigate energy consumption in public buildings sector in China

    International Nuclear Information System (INIS)

    Chen Shuqin; Li Nianping; Guan Jun

    2008-01-01

    The purpose of this research is to find a statistical methodology to investigate the national energy consumption in the public buildings sector in China, in order to look into the actuality of the national energy consumption of public buildings and to provide abundant data for building energy efficiency work. The frame of a national statistical system of energy consumption for public buildings is presented in this paper. The statistical index system of energy consumption is constituted, which refers to the general characteristics of public buildings, their possession and utilization of energy consumption equipment and their energy consumption quantities. Sequentially, a set of statistical report forms is designed to investigate the energy consumption of cities, provinces and the country, respectively. On this base, the above statistical methodology is used to gather statistics of a public building for annual energy consumption

  5. Learning of the subject: Methodology of investigation by means of a Site Web.

    Directory of Open Access Journals (Sweden)

    Yolanda Margarita Carbonell Cabarga

    2010-10-01

    Full Text Available Results of an investigation are presented having as an objective: the design of a Web Site for the learning of Methodology of Investigation subject in Psychology Bachelor of the Municipal University of Sancti Spíritus. This study was carried out in students of psychology career who were facing first year. Methods of the theoretical and empiric level were applied as well as the Mathematical Statistic. In the diagnosis was possible to appreciate the ignorance regarding the use of the methodology in the therorical methodological design of an investigation, also the difficulties in the study of the subject and violations in the application of orientations from the professors at the time of doing the research papers, so an interactive Web Site was obtained and applied which allow the teaching of the subject. The site was validated by means of a quasi-experiment, the obtained information was processed with the use of the statistical inferentia, results were in general highly significant for the feasibility of the proposal.

  6. Initial building investigations at Aberdeen Proving Ground, Maryland: Objectives and methodology

    Energy Technology Data Exchange (ETDEWEB)

    Brubaker, K.L.; Dougherty, J.M.; McGinnis, L.D.

    1994-12-01

    As part of an environmental-contamination source-definition program at Aberdeen Proving Ground, detailed internal and external inspections of 23 potentially contaminated buildings are being conducted to describe and characterize the state of each building as it currently exists and to identify areas potentially contaminated with toxic or other hazardous substances. In addition, a detailed geophysical investigation is being conducted in the vicinity of each target building to locate and identify subsurface structures, associated with former building operations, that are potential sources of contamination. This report describes the objectives of the initial building inspections, including the geophysical investigations, and discusses the methodology that has been developed to achieve these objectives.

  7. The application of experimental design methodology for the investigation of liquid radioactive waste treatment

    Directory of Open Access Journals (Sweden)

    Šljivić-Ivanović Marija Z.

    2017-01-01

    Full Text Available The sorption properties of waste facade, brick, and asphalt sample towards Sr(II, Co(II, and Ni(II ions from single and multicomponent solutions were investigated. The highest sorption capacity was found for Ni(II ions, while the most effective sorbent was facade. Simplex Centroid Mixture Design was used in order to investigate the sorption processes of ions from solutions with different composition as well as the competition between the cations. Based on the statistical analysis results, the equations for data modeling were proposed. According to the observations, the investigated solid matrices can be effectively used for the liquid radioactive waste treatment. Furthermore, the applied methodology turned out to be an easy and operational way for the investigations of multicomponent sorption processes. [Project of the Serbian Ministry of Education, Science and Technological Development, Grant no. III 43009 and Grant no. OI 171007

  8. Expanding the Security Dimension of Surety

    Energy Technology Data Exchange (ETDEWEB)

    SENGLAUB, MICHAEL E.

    1999-10-01

    A small effort was conducted at Sandia National Laboratories to explore the use of a number of modern analytic technologies in the assessment of terrorist actions and to predict trends. This work focuses on Bayesian networks as a means of capturing correlations between groups, tactics, and targets. The data that was used as a test of the methodology was obtained by using a special parsing algorithm written in JAVA to create records in a database from information articles captured electronically. As a vulnerability assessment technique the approach proved very useful. The technology also proved to be a valuable development medium because of the ability to integrate blocks of information into a deployed network rather than waiting to fully deploy only after all relevant information has been assembled.

  9. A Methodology and Tool for Investigation of Artifacts Left by the BitTorrent Client

    Directory of Open Access Journals (Sweden)

    Algimantas Venčkauskas

    2016-05-01

    Full Text Available The BitTorrent client application is a popular utility for sharing large files over the Internet. Sometimes, this powerful utility is used to commit cybercrimes, like sharing of illegal material or illegal sharing of legal material. In order to help forensics investigators to fight against these cybercrimes, we carried out an investigation of the artifacts left by the BitTorrent client. We proposed a methodology to locate the artifacts that indicate the BitTorrent client activity performed. Additionally, we designed and implemented a tool that searches for the evidence left by the BitTorrent client application in a local computer running Windows. The tool looks for the four files holding the evidence. The files are as follows: *.torrent, dht.dat, resume.dat, and settings.dat. The tool decodes the files, extracts important information for the forensic investigator and converts it into XML format. The results are combined into a single result file.

  10. An investigative study towards constructing anthropocentric Man-Machine System design evaluation methodology

    International Nuclear Information System (INIS)

    Yoshikawa, H.; Gofuku, A.; Itoh, T.; Sasaki, K.

    1992-01-01

    A methodological investigation has been conducted for evaluating the reliability of man-machine interaction in the total Man-Machine System (MMS) from the view-point of safety maintenance for emergent situations of nuclear power plant. Basic considerations in our study are: (i) what are the MMS design data to be evaluated, (ii) how are those MMS design data should be treated, and (iii) how the introduction effects of various operator support tools can be evaluated. The methods of both qualitative and quantitative MMS design evaluation are summarized in this paper, with the system architecture based on man-machine interaction simulation and the related cognitive human error factor analysis. (author)

  11. Investigation of Super Learner Methodology on HIV-1 Small Sample: Application on Jaguar Trial Data.

    Science.gov (United States)

    Houssaïni, Allal; Assoumou, Lambert; Marcelin, Anne Geneviève; Molina, Jean Michel; Calvez, Vincent; Flandre, Philippe

    2012-01-01

    Background. Many statistical models have been tested to predict phenotypic or virological response from genotypic data. A statistical framework called Super Learner has been introduced either to compare different methods/learners (discrete Super Learner) or to combine them in a Super Learner prediction method. Methods. The Jaguar trial is used to apply the Super Learner framework. The Jaguar study is an "add-on" trial comparing the efficacy of adding didanosine to an on-going failing regimen. Our aim was also to investigate the impact on the use of different cross-validation strategies and different loss functions. Four different repartitions between training set and validations set were tested through two loss functions. Six statistical methods were compared. We assess performance by evaluating R(2) values and accuracy by calculating the rates of patients being correctly classified. Results. Our results indicated that the more recent Super Learner methodology of building a new predictor based on a weighted combination of different methods/learners provided good performance. A simple linear model provided similar results to those of this new predictor. Slight discrepancy arises between the two loss functions investigated, and slight difference arises also between results based on cross-validated risks and results from full dataset. The Super Learner methodology and linear model provided around 80% of patients correctly classified. The difference between the lower and higher rates is around 10 percent. The number of mutations retained in different learners also varys from one to 41. Conclusions. The more recent Super Learner methodology combining the prediction of many learners provided good performance on our small dataset.

  12. Investigation Of Infrared Drying Behaviour Of Spinach Leaves Using ANN Methodology And Dried Product Quality

    Directory of Open Access Journals (Sweden)

    Sarimeseli Ayse

    2015-12-01

    Full Text Available Effects of infrared power output and sample mass on drying behaviour, colour parameters, ascorbic acid degradation, rehydration characteristics and some sensory scores of spinach leaves were investigated. Within both of the range of the infrared power outputs, 300–500 W, and sample amounts, 15–60 g, moisture content of the leaves was reduced from 6.0 to 0.1±(0.01 kg water/kg dry base value. It was recorded that drying times of the spinach leaves varied between 3.5–10 min for constant sample amount, and 4–16.5 min for constant power output. Experimental drying data obtained were successfully investigated by using artificial neural network methodology. Some changes were recorded in the quality parameters of the dried leaves, and acceptable sensory scores for the dried leaves were observed in all of the experimental conditions.

  13. Improvement in the incident reporting and investigation procedures using process excellence (DMAI2C) methodology

    International Nuclear Information System (INIS)

    Miles, Elizabeth N.

    2006-01-01

    In 1996, Health and Safety introduced an incident investigation process called Learning to Look ( C) to Johnson and Johnson. This process provides a systematic way of analyzing work-related injuries and illness, uncovers root cause that leads to system defects, and points to viable solutions. The process analyzed involves three steps: investigation and reporting of the incident, determination of root cause, and development and implementation of a corrective action plan. The process requires the investigators to provide an initial communication for work-related serious injuries and illness as well as lost workday cases to Corporate Headquarters within 72h of the incident with a full investigative report to follow within 10 days. A full investigation requires a written report, a cause-result logic diagram (CRLD), a corrective action plan (CAP) and a report of incident costs (SafeCost) all due to be filed electronically. It is incumbent on the principal investigator and his or her investigative teams to assemble the various parts of the investigation and to follow up with the relevant parties to ensure corrective actions are implemented, and a full report submitted to Corporate executives. Initial review of the system revealed that the process was not working as designed. A number of reports were late, not signed by the business leaders, and in some instances, all cause were not identified. Process excellence was the process used to study the issue. The team used six sigma DMAI 2 C methodologies to identify and implement system improvements. The project examined the breakdown of the critical aspects of the reporting and investigation process that lead to system errors. This report will discuss the study findings, recommended improvements, and methods used to monitor the new improved process

  14. 77 FR 39322 - Companies Holding Certificates of Authority as Acceptable Sureties on Federal Bonds and as...

    Science.gov (United States)

    2012-07-02

    ..., CHICAGO, IL 60604. PHONE: (312) 822-5000. UNDERWRITING LIMITATION b/: $13,107,000. SURETY LICENSES c,f... Fire and Casualty Company (NAIC 24066) BUSINESS ADDRESS: 9450 Seward Road, Fairfield, OH 45014. PHONE... 39327

  15. 77 FR 18883 - Surety Companies Acceptable on Federal Bonds-Termination and Merger; Pioneer General Insurance...

    Science.gov (United States)

    2012-03-28

    .... Department of the Treasury, Financial Management Service, Financial Accounting and Services Division, Surety... Carrico, Director, Financial Accounting and Services Division, Financial Management Service. [FR Doc. 2012...--Termination and Merger; Pioneer General Insurance Company AGENCY: Financial Management Service, Fiscal Service...

  16. 77 FR 553 - Surety Companies Acceptable on Federal Bonds: Termination; Western Bonding Company

    Science.gov (United States)

    2012-01-05

    .... Department of the Treasury, Financial Management Service, Financial Accounting and Services Division, Surety..., 2011. Laura Carrico, Director, Financial Accounting and Services Division, Financial Management Service...: Termination; Western Bonding Company AGENCY: Financial Management Service, Fiscal Service, Department of the...

  17. 76 FR 22451 - Surety Companies Acceptable on Federal Bonds-Change in Business Address; American Economy...

    Science.gov (United States)

    2011-04-21

    ... DEPARTMENT OF THE TREASURY Fiscal Service Surety Companies Acceptable on Federal Bonds--Change in Business Address; American Economy Insurance Company, American States Insurance Company, SAFECO Insurance... formally changed their ``Business Address'' as follows: American Economy Insurance Company (NAIC 19690...

  18. The influence of patient portals on users' decision making is insufficiently investigated: A systematic methodological review.

    Science.gov (United States)

    Fraccaro, Paolo; Vigo, Markel; Balatsoukas, Panagiotis; Buchan, Iain E; Peek, Niels; van der Veer, Sabine N

    2018-03-01

    Patient portals are considered valuable conduits for supporting patients' self-management. However, it is unknown why they often fail to impact on health care processes and outcomes. This may be due to a scarcity of robust studies focusing on the steps that are required to induce improvement: users need to effectively interact with the portal (step 1) in order to receive information (step 2), which might influence their decision-making (step 3). We aimed to explore this potential knowledge gap by investigating to what extent each step has been investigated for patient portals, and explore the methodological approaches used. We performed a systematic literature review using Coiera's information value chain as a guiding theoretical framework. We searched MEDLINE and Scopus by combining terms related to patient portals and evaluation methodologies. Two reviewers selected relevant papers through duplicate screening, and one extracted data from the included papers. We included 115 articles. The large majority (n = 104) evaluated aspects related to interaction with patient portals (step 1). Usage was most often assessed (n = 61), mainly by analysing system interaction data (n = 50), with most authors considering participants as active users if they logged in at least once. Overall usability (n = 57) was commonly assessed through non-validated questionnaires (n = 44). Step 2 (information received) was investigated in 58 studies, primarily by analysing interaction data to evaluate usage of specific system functionalities (n = 34). Eleven studies explicitly assessed the influence of patient portals on patients' and clinicians' decisions (step 3). Whereas interaction with patient portals has been extensively studied, their influence on users' decision-making remains under-investigated. Methodological approaches to evaluating usage and usability of portals showed room for improvement. To unlock the potential of patient portals, more (robust) research

  19. Investigating DMOs through the Lens of Social Network Analysis: Theoretical Gaps, Methodological Challenges and Practitioner Perspectives

    Directory of Open Access Journals (Sweden)

    Dean HRISTOV

    2015-06-01

    Full Text Available The extant literature on networks in tourism management research has traditionally acknowledged destinations as the primary unit of analysis. This paper takes an alternative perspective and positions Destination Management Organisations (DMOs at the forefront of today’s tourism management research agenda. Whilst providing a relatively structured approach to generating enquiry, network research vis-à-vis Social Network Analysis (SNA in DMOs is often surrounded by serious impediments. Embedded in the network literature, this conceptual article aims to provide a practitioner perspective on addressing the obstacles to undertaking network studies in DMO organisations. A simple, three-step methodological framework for investigating DMOs as interorganisational networks of member organisations is proposed in response to complexities in network research. The rationale behind introducing such framework lies in the opportunity to trigger discussions and encourage further academic contributions embedded in both theory and practice. Academic and practitioner contributions are likely to yield insights into the importance of network methodologies applied to DMO organisations.

  20. Systematic investigation of gastrointestinal diseases in China (SILC): validation of survey methodology.

    Science.gov (United States)

    Yan, Xiaoyan; Wang, Rui; Zhao, Yanfang; Ma, Xiuqiang; Fang, Jiqian; Yan, Hong; Kang, Xiaoping; Yin, Ping; Hao, Yuantao; Li, Qiang; Dent, John; Sung, Joseph; Zou, Duowu; Johansson, Saga; Halling, Katarina; Liu, Wenbin; He, Jia

    2009-11-19

    Symptom-based surveys suggest that the prevalence of gastrointestinal diseases is lower in China than in Western countries. The aim of this study was to validate a methodology for the epidemiological investigation of gastrointestinal symptoms and endoscopic findings in China. A randomized, stratified, multi-stage sampling methodology was used to select 18,000 adults aged 18-80 years from Shanghai, Beijing, Xi'an, Wuhan and Guangzhou. Participants from Shanghai were invited to provide blood samples and undergo upper gastrointestinal endoscopy. All participants completed Chinese versions of the Reflux Disease Questionnaire (RDQ) and the modified Rome II questionnaire; 20% were also invited to complete the 36-item Short Form Health Survey (SF-36) and Epworth Sleepiness Scale (ESS). The psychometric properties of the questionnaires were evaluated statistically. The study was completed by 16,091 individuals (response rate: 89.4%), with 3219 (89.4% of those invited) completing the SF-36 and ESS. All 3153 participants in Shanghai provided blood samples and 1030 (32.7%) underwent endoscopy. Cronbach's alpha coefficients were 0.89, 0.89, 0.80 and 0.91, respectively, for the RDQ, modified Rome II questionnaire, ESS and SF-36, supporting internal consistency. Factor analysis supported construct validity of all questionnaire dimensions except SF-36 psychosocial dimensions. This population-based study has great potential to characterize the relationship between gastrointestinal symptoms and endoscopic findings in China.

  1. Identification of androgen receptor antagonists: In vitro investigation and classification methodology for flavonoid.

    Science.gov (United States)

    Wu, Yang; Doering, Jon A; Ma, Zhiyuan; Tang, Song; Liu, Hongling; Zhang, Xiaowei; Wang, Xiaoxiang; Yu, Hongxia

    2016-09-01

    A tremendous gap exists between the number of potential endocrine disrupting chemicals (EDCs) possibly in the environment and the limitation of traditional regulatory testing. In this study, the anti-androgenic potencies of 21 flavonoids were analyzed in vitro, and another 32 flavonoids from the literature were selected as additional chemicals. Molecular dynamic simulations were employed to obtain four different separation approaches based on the different behaviors of ligands and receptors during the process of interaction. Specifically, ligand-receptor complex which highlighted the discriminating features of ligand escape or retention via "mousetrap" mechanism, hydrogen bonds formed during simulation times, ligand stability and the stability of the helix-12 of the receptor were investigated. Together, a methodology was generated that 87.5% of flavonoids could be discriminated as active versus inactive antagonists, and over 90% inactive antagonists could be filtered out before QSAR study. This methodology could be used as a "proof of concept" to identify inactive anti-androgenic flavonoids, as well could be beneficial for rapid risk assessment and regulation of multiple new chemicals for androgenicity. Copyright © 2016 Elsevier Ltd. All rights reserved.

  2. Investigation Methodology of a Virtual Desktop Infrastructure for IoT

    Directory of Open Access Journals (Sweden)

    Doowon Jeong

    2015-01-01

    Full Text Available Cloud computing for IoT (Internet of Things has exhibited the greatest growth in the IT market in the recent past and this trend is expected to continue. Many companies are adopting a virtual desktop infrastructure (VDI for private cloud computing to reduce costs and enhance the efficiency of their servers. As a VDI is widely used, threats of cyber terror and invasion are also increasing. To minimize the damage, response procedure for cyber intrusion on a VDI should be systematized. Therefore, we propose an investigation methodology for VDI solutions in this paper. Here we focus on a virtual desktop infrastructure and introduce various desktop virtualization solutions that are widely used, such as VMware, Citrix, and Microsoft. In addition, we verify the integrity of the data acquired in order that the result of our proposed methodology is acceptable as evidence in a court of law. During the experiment, we observed an error: one of the commonly used digital forensic tools failed to mount a dynamically allocated virtual disk properly.

  3. Surety of the nation`s critical infrastructures: The challenge restructuring poses to the telecommunications sector

    Energy Technology Data Exchange (ETDEWEB)

    Cox, R.; Drennen, T.E.; Gilliom, L.; Harris, D.L.; Kunsman, D.M.; Skroch, M.J.

    1998-04-01

    The telecommunications sector plays a pivotal role in the system of increasingly connected and interdependent networks that make up national infrastructure. An assessment of the probable structure and function of the bit-moving industry in the twenty-first century must include issues associated with the surety of telecommunications. The term surety, as used here, means confidence in the acceptable behavior of a system in both intended and unintended circumstances. This paper outlines various engineering approaches to surety in systems, generally, and in the telecommunications infrastructure, specifically. It uses the experience and expectations of the telecommunications system of the US as an example of the global challenges. The paper examines the principal factors underlying the change to more distributed systems in this sector, assesses surety issues associated with these changes, and suggests several possible strategies for mitigation. It also studies the ramifications of what could happen if this sector became a target for those seeking to compromise a nation`s security and economic well being. Experts in this area generally agree that the U. S. telecommunications sector will eventually respond in a way that meets market demands for surety. Questions remain open, however, about confidence in the telecommunications sector and the nation`s infrastructure during unintended circumstances--such as those posed by information warfare or by cascading software failures. Resolution of these questions is complicated by the lack of clear accountability of the private and the public sectors for the surety of telecommunications.

  4. Investigation of extractive microbial transformation in nonionic surfactant micelle aqueous solution using response surface methodology.

    Science.gov (United States)

    Xue, Yingying; Qian, Chen; Wang, Zhilong; Xu, Jian-He; Yang, Rude; Qi, Hanshi

    2010-01-01

    Extractive microbial transformation of L-phenylacetylcarbinol (L-PAC) in nonionic surfactant Triton X-100 micelle aqueous solution was investigated by response surface methodology. Based on the Box-Behnken design, a mathematical model was developed for the predication of mutual interactions between benzaldehyde, Triton X-100, and glucose on L-PAC production. It indicated that the negative or positive effect of nonionic surfactant strongly depended on the substrate concentration. The model predicted that the optimal concentration of benzaldehyde, Triton X-100, and glucose was 1.2 ml, 15 g, and 2.76 g per 100 ml, respectively. Under the optimal condition, the maximum L-PAC production was 27.6 mM, which was verified by a time course of extractive microbial transformation. A discrete fed-batch process for verification of cell activity was also presented.

  5. From SOLER to SURETY for effective non-verbal communication.

    Science.gov (United States)

    Stickley, Theodore

    2011-11-01

    This paper critiques the model for non-verbal communication referred to as SOLER (which stands for: "Sit squarely"; "Open posture"; "Lean towards the other"; "Eye contact; "Relax"). It has been approximately thirty years since Egan (1975) introduced his acronym SOLER as an aid for teaching and learning about non-verbal communication. There is evidence that the SOLER framework has been widely used in nurse education with little published critical appraisal. A new acronym that might be appropriate for non-verbal communication skills training and education is proposed and this is SURETY (which stands for "Sit at an angle"; "Uncross legs and arms"; "Relax"; "Eye contact"; "Touch"; "Your intuition"). The proposed model advances the SOLER model by including the use of touch and the importance of individual intuition is emphasised. The model encourages student nurse educators to also think about therapeutic space when they teach skills of non-verbal communication. Copyright © 2011 Elsevier Ltd. All rights reserved.

  6. A methodology for the investigation of toughness and crack propagation in mouse bone.

    Science.gov (United States)

    Carriero, Alessandra; Zimmermann, Elizabeth A; Shefelbine, Sandra J; Ritchie, Robert O

    2014-11-01

    Bone fracture is a health concern for those with aged bone and brittle bone diseases. Mouse bone is widely used as a model of human bone, especially to investigate preclinical treatment strategies. However, little is known about the mechanisms of mouse bone fracture and its similarities and differences from fracture in human bone. In this work we present a methodology to investigate the fracture toughness during crack initiation and crack propagation for mouse bone. Mouse femora were dissected, polished on their periosteal surface, notched on the posterior surface at their mid-diaphysis, and tested in three-point bending under displacement control at a rate of 0.1mm/min using an in situ loading stage within an environmental scanning electron microscope. We obtained high-resolution real-time imaging of the crack initiation and propagation in mouse bone. From the images we can measure the crack extension at each step of the crack growth and calculate the toughness of the bone (in terms of stress intensity factor (K) and work to fracture (Wf)) as a function of stable crack length (Δa), thus generating a resistance curve for the mouse bone. The technique presented here provides insight into the evolution of microdamage and the toughening mechanisms that resist crack propagation, which are essential for preclinical development of treatments to enhance bone quality and combat fracture risk. Copyright © 2014 Elsevier Ltd. All rights reserved.

  7. THE METHODOLOGICAL REVIEW OF THE STUDIES INVESTIGATING THE SUCCESS AND FAILURE FACTORS IN NEWPRODUCT DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Haluk Köksal

    2013-05-01

    Much has been written on the factors which can distinguish between successful and failure products. However, the methodologies in this area of research are almost as numerous as the articles which have been written. This article reviews the studies on new product success and failure factors from the methodological perspective.

  8. Investigating High-tech and Knowledge-Intensive Ventures: Methodological Issues

    DEFF Research Database (Denmark)

    Madsen, Henning; Neergaard, Helle; Christensen, Patrizia V.

    2003-01-01

    The paper presents and discusses the advantages and disadvantages of the methodology applied in a longitudinal project on entrepreneurship, the SNE project.......The paper presents and discusses the advantages and disadvantages of the methodology applied in a longitudinal project on entrepreneurship, the SNE project....

  9. A post-earthquake psychopathological investigation in Armenia: methodology, summary of findings, and follow-up.

    Science.gov (United States)

    Khachadourian, Vahe; Armenian, Haroutune; Demirchyan, Anahit; Melkonian, Arthur; Hovanesian, Ashot

    2016-07-01

    The post-earthquake psychopathological investigation (PEPSI) was designed to probe the short-and long-term effects of the earthquake in northern Armenia on 7 December 1988 on survivors' mental and physical health. Four phases of this study have been conducted to date, and, overall, more than 80 per cent of a sub-sample of 1,773 drawn from an initial cohort of 32,743 was successfully followed during 2012. This paper describes the methodology employed in the evaluation, summarises previous findings, details the current objectives, and examines the general characteristics of the sample based on the most recent follow-up phase outcomes. Despite a significant decrease in psychopathology rates between 1990 and 2012, prevalence rates of post-traumatic stress disorder and depression among study participants in 2012 were greater than 15 and 26 per cent, respectively. The paper also notes the strengths and limitations of the study vis-à-vis future research and highlights the importance and potential practical implications of similar assessments and their outcomes. © 2016 The Author(s). Disasters © Overseas Development Institute, 2016.

  10. Investigation of a new methodology in high temperature oxidation application to commercial austenitic steels

    Energy Technology Data Exchange (ETDEWEB)

    Vangeli, P.; Ivarsson, B. [Avesta Sheffield, R and D (Sweden)

    2001-07-01

    Avesta Sheffield R and D has evaluated a scaling temperature for heat resistant steels from laboratory gravimetric measurements of cyclic exposures. In this paper, this old method is described. A new methodology, based on the results of isothermal and cyclic tests, is proposed and discussed. It includes isothermal and cyclic oxidation kinetics of different commercial austenitic steels. Oxidation of Avesta Sheffield 153MA, 253MA and 353MA and standard commercial heat resistant steels 309S, 310S and A800 have been investigated under isothermal and cyclic conditions, in air, in the temperature range 800-1200 C. For all alloys, oxidation rates obey a parabolic law below a critical temperature. The activation energies have been calculated. Kinetics of the cyclic tests show that a critical mass change corresponding to a critical thickness of the oxide scale is responsible for the spallation start. This thickness depends on the composition of the alloys, and is very much increased by alloying minor elements like Ce. (orig.)

  11. Terminological and methodological aspects in investigating the preservation of rare library materials

    Directory of Open Access Journals (Sweden)

    Damir Hasenay

    2008-07-01

    efficient management and good organization of preservation presupposes a systematic and comprehensive approach applicable independent of the type of institution or type of material. The management and organization issues concerning the preservation of rare library materials is shown as an overview of their most important elements, with a critical evaluation of the most important achievements in theory in practice. The methodological aspect is also very important in investigating the preservation of rare library materials.The special emphasis is placed on the systematic investigation of the status of library holdings and the possibilities offered by the qualitative and quantitative description of holdings on the one hand, and the possibilities offered by the methods of interview and/or questionnaire on the other. Several practical examples that may serve as test models in the approach to this issue have been analyzed.The existing organization of the collection of historical newspapers from the city of Osijek area, and the organization of the collection of old books in the library of the Franciscan monastery in Mostar in relation to their status and protection activities have also been discussed. By comparing these models a significant difference in the material and content characteristics of the analyzed rare library holdings have been identified. This difference calls for the use of different methodologies for investigating the condition of the holdings. The information on the condition of the library holdings and approaches to their preservation serve as a starting point for planning further steps for the efficient preservation of rare library materials. The insights into the problem of preservation presented in this paper should be understood as a foundation for further implementation on similar examples.Key words : preservation of library materials, rare library materials, rare books, historical newspapers, organization and management of preservation, description of the

  12. Why do pregnant women participate in research? A patient participation investigation using Q-Methodology.

    Science.gov (United States)

    Meshaka, Riwa; Jeffares, Stephen; Sadrudin, Farah; Huisman, Nicole; Saravanan, Ponnusamy

    2017-04-01

    Patient participation in study design is paramount to design studies that are acceptable to patients. Despite an increase in research involving pregnant women, relatively little is known about the motivational factors that govern their decision to be involved in a clinical trial, compared to other patient groups. To better understand the viewpoints of pregnant women who take part in clinical trials. We chose to use Q-Methodology, a method of exploring the structure of opinions surrounding a topic. We developed a set of 40 statements that encompassed the reasons why pregnant women might want to take part in research and 30 research participants from the PRiDE study (an observational trial investigating the role of micronutrients in gestational diabetes) were asked to rank them in order of agreement. The finished matrices from each participant were compared and analysed to produce capturing viewpoints. About 30 women aged 19-40 involved in the PRiDE study completed the questionnaire. There were two overarching motivators that emerged: a willingness to help medical research and improve our knowledge of medical science, and having a personal connection to the disease, therefore a potential fear of being affected by it. A third, less significant viewpoint, was that of a lack of inconvenience being a motivating factor. Understanding what motivates pregnant women to decide to take part in a research study is valuable and helps researchers maximize their uptake and retention rates when designing a trial involving pregnant women. © 2016 The Authors. Health Expectations Published by John Wiley & Sons Ltd.

  13. Toward a risk-based approach to the assessment of the surety of information systems

    Energy Technology Data Exchange (ETDEWEB)

    Wyss, G.D.; Fletcher, S.K.; Halbgewachs, R.D.; Jansma, R.M.; Lim, J.J.; Murphy, M.; Sands, P.D.

    1995-03-01

    Traditional approaches to the assessment of information systems have treated system security, system reliability, data integrity, and application functionality as separate disciplines. However, each areas requirements and solutions have a profound impact on the successful implementation of the other areas. A better approach is to assess the ``surety`` of an information system, which is defined as ensuring the ``correct`` operation of an information system by incorporating appropriate levels of safety, functionality, confidentiality, availability, and integrity. Information surety examines the combined impact of design alternatives on all of these areas. We propose a modelling approach that combines aspects of fault trees and influence diagrams for assessing information surety requirements under a risk assessment framework. This approach allows tradeoffs to be based on quantitative importance measures such as risk reduction while maintaining the modelling flexibility of the influence diagram paradigm. This paper presents an overview of the modelling method and a sample application problem.

  14. A methodology to investigate size scale effects in crystalline plasticity using uniaxial compression testing

    International Nuclear Information System (INIS)

    Uchic, Michael D.; Dimiduk, Dennis M.

    2005-01-01

    A methodology for performing uniaxial compression tests on samples having micron-size dimensions is presented. Sample fabrication is accomplished using focused ion beam milling to create cylindrical samples of uniform cross-section that remain attached to the bulk substrate at one end. Once fabricated, samples are tested in uniaxial compression using a nanoindentation device outfitted with a flat tip, and a stress-strain curve is obtained. The methodology can be used to examine the plastic response of samples of different sizes that are from the same bulk material. In this manner, dimensional size effects at the micron scale can be explored for single crystals, using a readily interpretable test that minimizes imposed stretch and bending gradients. The methodology was applied to a single-crystal Ni superalloy and a transition from bulk-like to size-affected behavior was observed for samples 5 μm in diameter and smaller

  15. New research methodologies used for the investigation of immune system in veterinary species

    Czech Academy of Sciences Publication Activity Database

    Šinkora, Marek; Šinkorová, Jana

    2014-01-01

    Roč. 12, č. 45 (2014), s. 58-65 ISSN 1313-2571 R&D Projects: GA AV ČR(CZ) P502/12/0110; GA ČR(CZ) P502/10/0038 Institutional support: RVO:61388971 Keywords : methodology * veterinary medicine * immune system Subject RIV: EC - Immunology

  16. Methodological Capacity within the Field of "Educational Technology" Research: An Initial Investigation

    Science.gov (United States)

    Bulfin, Scott; Henderson, Michael; Johnson, Nicola F.; Selwyn, Neil

    2014-01-01

    The academic study of educational technology is often characterised by critics as methodologically limited. In order to test this assumption, the present paper reports on data collected from a survey of 462 "research active" academic researchers working in the broad areas of educational technology and educational media. The paper…

  17. Uncovering the Transnational Networks, Organisational Techniques and State-Corporate Ties Behind Grand Corruption: Building an Investigative Methodology

    Directory of Open Access Journals (Sweden)

    Kristian Lasslett

    2017-11-01

    Full Text Available While grand corruption is a major global governance challenge, researchers notably lack a systematic methodology for conducting qualitative research into its complex forms. To address this lacuna, the following article sets out and applies the corruption investigative framework (CIF, a methodology designed to generate a systematic, transferable approach for grand corruption research. Its utility will be demonstrated employing a case study that centres on an Australian-led megaproject being built in Papua New Guinea’s capital city, Port Moresby. Unlike conventional analyses of corruption in Papua New Guinea, which emphasise its local characteristics and patrimonial qualities, application of CIF uncovered new empirical layers that centre on transnational state-corporate power, the ambiguity of civil society, and the structural inequalities that marginalise resistance movements. The important theoretical consequences of the findings and underpinning methodology are explored.

  18. Designing and Implementing INTREPID, an Intensive Program in Translational Research Methodologies for New Investigators

    Science.gov (United States)

    Aphinyanaphongs, Yindalon; Shao, Yongzhao; Micoli, Keith J.; Fang, Yixin; Goldberg, Judith D.; Galeano, Claudia R.; Stangel, Jessica H.; Chavis‐Keeling, Deborah; Hochman, Judith S.; Cronstein, Bruce N.; Pillinger, Michael H.

    2014-01-01

    Abstract Senior housestaff and junior faculty are often expected to perform clinical research, yet may not always have the requisite knowledge and skills to do so successfully. Formal degree programs provide such knowledge, but require a significant commitment of time and money. Short‐term training programs (days to weeks) provide alternative ways to accrue essential information and acquire fundamental methodological skills. Unfortunately, published information about short‐term programs is sparse. To encourage discussion and exchange of ideas regarding such programs, we here share our experience developing and implementing INtensive Training in Research Statistics, Ethics, and Protocol Informatics and Design (INTREPID), a 24‐day immersion training program in clinical research methodologies. Designing, planning, and offering INTREPID was feasible, and required significant faculty commitment, support personnel and infrastructure, as well as committed trainees. PMID:25066862

  19. Experimental and Numerical Investigation of the Tracer Gas Methodology in the Case of a Naturally Cross-Ventilated Building

    DEFF Research Database (Denmark)

    Nikolopoulos, Nikos; Nikolopoulos, Aristeidis; Larsen, Tine Steen

    2012-01-01

    The paper presents the investigation of a naturally cross – ventilated building using both experimental and numerical methods with the parameters being the free-stream and the incidence angle of the wind to the openings of the building. The experimental methodology calculates the air change rate......, focusing on the time dependent character of the induced flow field. The numerical results are compared with corresponding experimental data for the three aforementioned experimental methodologies in the case of a full scale building inside a wind-tunnel. The numerical investigation reveals that for large...... based either on measurements of the inlet velocity profile, the outlet velocity profile or the descending rate of the tracer gas concentration using the decay method. The numerical investigation is based on the solution of the governing Navier-Stokes equations in their full three dimensional expression...

  20. 75 FR 6791 - Surety Companies Acceptable on Federal Bonds-Termination: Trinity Universal Insurance Company

    Science.gov (United States)

    2010-02-10

    .... However, no new bonds should be accepted from this company, and bonds that are continuous in nature should... DEPARTMENT OF THE TREASURY Fiscal Service Surety Companies Acceptable on Federal Bonds--Termination: Trinity Universal Insurance Company AGENCY: Financial Management Service, Fiscal Service...

  1. 75 FR 38188 - Surety Companies Acceptable on Federal Bonds-Termination: Stonebridge Casualty Insurance Company

    Science.gov (United States)

    2010-07-01

    ... should be accepted from this company, and bonds that are continuous in nature should not be renewed. The... DEPARTMENT OF THE TREASURY Fiscal Service [NAIC 10952] Surety Companies Acceptable on Federal Bonds--Termination: Stonebridge Casualty Insurance Company AGENCY: Financial Management Service, Fiscal...

  2. 75 FR 81331 - Surety Companies Acceptable on Federal Bonds: Termination-Penn Millers Insurance Company

    Science.gov (United States)

    2010-12-27

    ... should be accepted from this company, and bonds that are continuous in nature should not be renewed. The... DEPARTMENT OF THE TREASURY Fiscal Service Surety Companies Acceptable on Federal Bonds: Termination--Penn Millers Insurance Company AGENCY: Financial Management Service, Fiscal Service, Department...

  3. 77 FR 29472 - Surety Companies Acceptable on Federal Bonds-Termination: Atlantic Bonding Company, Inc.

    Science.gov (United States)

    2012-05-17

    ... be accepted from this company, and bonds that are continuous in nature should not be renewed. The... DEPARTMENT OF THE TREASURY Fiscal Service Surety Companies Acceptable on Federal Bonds--Termination: Atlantic Bonding Company, Inc. AGENCY: Financial Management Service, Fiscal Service, Department...

  4. 75 FR 33897 - Surety Companies Acceptable on Federal Bonds-Terminations: Commercial Alliance Insurance Company

    Science.gov (United States)

    2010-06-15

    ... be accepted from this company, and bonds that are continuous in nature should not be renewed. The... DEPARTMENT OF THE TREASURY Fiscal Service Surety Companies Acceptable on Federal Bonds--Terminations: Commercial Alliance Insurance Company AGENCY: Financial Management Service, Fiscal Service...

  5. 77 FR 42554 - Surety Companies Acceptable on Federal Bonds-Termination: Peerless Insurance Company (NAIC #24198)

    Science.gov (United States)

    2012-07-19

    ... should be accepted from this company, and bonds that are continuous in nature should not be renewed. The... DEPARTMENT OF THE TREASURY Fiscal Service Surety Companies Acceptable on Federal Bonds--Termination: Peerless Insurance Company (NAIC 24198) AGENCY: Financial Management Service, Fiscal Service...

  6. 75 FR 36153 - Surety Companies Acceptable on Federal Bonds-Terminations: Victore Insurance Company

    Science.gov (United States)

    2010-06-24

    ... from this company, and bonds that are continuous in nature should not be renewed. The Circular may be... DEPARTMENT OF THE TREASURY Fiscal Service Surety Companies Acceptable on Federal Bonds--Terminations: Victore Insurance Company AGENCY: Financial Management Service, Fiscal Service, Department of the...

  7. 14 CFR 372.24 - Surety bond, depository agreement, escrow agreement.

    Science.gov (United States)

    2010-01-01

    ... (2) which is listed in Best's Insurance Reports (fire and casualty) with a general policyholders... surety to any charter participant shall not exceed the charter operator's applicable tariff fare. Such... not exceed the charter operator's applicable tariff fare; and (ii) Enter into an agreement with a bank...

  8. 78 FR 44191 - Proposed Collection of Information: Annual Financial Statement of Surety Companies-Schedule F

    Science.gov (United States)

    2013-07-23

    ... Bureau of the Fiscal Service solicits comments concerning the Form FMS-6314 ``Annual Financial Statement... described below: Title: Annual Financial Statement of Surety Companies--Schedule F. OMB Number: 1510-0012... DEPARTMENT OF THE TREASURY Fiscal Service Proposed Collection of Information: Annual Financial...

  9. 12 CFR 7.1017 - National bank as guarantor or surety on indemnity bond.

    Science.gov (United States)

    2010-01-01

    ... foreign countries), if: (1) The bank has a substantial interest in the performance of the transaction involved (for example, a bank, as fiduciary, has a sufficient interest in the faithful performance by a... 12 Banks and Banking 1 2010-01-01 2010-01-01 false National bank as guarantor or surety on...

  10. 42 CFR 441.16 - Home health agency requirements for surety bonds; Prohibition on FFP.

    Science.gov (United States)

    2010-10-01

    ... surety bonds; Prohibition on FFP. (a) Definitions. As used in this section, unless the context indicates... to furnish timely confirmation of the issuance of, and the validity and accuracy of information... to the face amount of the bond; or (iii) For other good cause. (3) The Medicaid agency must specify...

  11. 27 CFR 24.157 - Application by surety for relief from bond.

    Science.gov (United States)

    2010-04-01

    ... AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS WINE Establishment and Operations Bonds and... received in the case of a bonded wine premises bond or wine vinegar plant bond. The surety will also file with the appropriate TTB officer an acknowledgment, or other evidence of service, of a notice on the...

  12. 75 FR 36153 - Surety Companies Acceptable On Federal Bonds-Change In Business Address: American Economy...

    Science.gov (United States)

    2010-06-24

    ... DEPARTMENT OF THE TREASURY Fiscal Service Surety Companies Acceptable On Federal Bonds--Change In Business Address: American Economy Insurance Company; American Fire and Casualty Company; American States... ADDRESS'' as follows: American Economy Insurance Company (NAIC 19690). BUSINESS ADDRESS: 500 North...

  13. A Quantitative and Systematic Methodology to Investigate Energy Consumption Issues in Multimodal Intercity Transportation Systems

    Directory of Open Access Journals (Sweden)

    Lili Du

    2015-09-01

    Full Text Available Energy issues in transportation systems have garnered increasing attention recently. This study proposes a systematic methodology for policy-makers to minimize energy consumption in multimodal intercity transportation systems considering suppliers’ operational constraints and travelers’ mobility requirements. A bi-level optimization model is developed for this purpose and considers the air, rail, private auto, and transit modes. The upper-level model is a mixed integer nonlinear program aiming to minimize energy consumption subject to transportation suppliers’ operational constraints and traffic demand distribution to paths resulting from the lower-level model. The lower-level model is a linear program seeking to maximize the trip utilities of travelers. The interactions between the multimodal transportation suppliers and intercity traffic demand are considered under the goal of minimizing system energy consumption. The proposed bi-level mixed integer model is relaxed and transformed into a mathematical program with complementarity constraints, and solved using a customized branch-and-bound algorithm. Numerical experiments, conducted using multimodal travel options between Lafayette, Indiana and Washington, D.C. reiterate that shifting traffic demand from private cars to the transit and rail modes significantly reduce energy consumption. Moreover, the proposed methodology provides tools to quantitatively analyze system energy consumption and traffic demand distribution among transportation modes under specific policy instruments. The results illustrate the need to systematically incorporate the interactions among traveler preferences, network structure, and supplier operational schemes to provide policy-makers insights for developing traffic demand shift mechanisms to minimize system energy consumption. Hence, the proposed methodology provide policy-makers the capability to analyze energy consumption in the transportation sector by a

  14. An investigation of constructions of justice and injustice in chronic pain: a Q-methodology approach.

    Science.gov (United States)

    McParland, Joanna; Hezseltine, Louisa; Serpell, Michael; Eccleston, Christopher; Stenner, Paul

    2011-09-01

    This study used Q-methodology to explore justice-related accounts of chronic pain. Eighty participants completed the Q-sorting procedure (33 chronic pain sufferers and 47 non-pain sufferers). Analysis revealed five main factors. Three factors blame: society for poor medical and interpersonal treatment; the chronic pain sufferer for indulging in self-pity and unempathic healthcare workers for ignoring patients. A fourth factor acknowledges the unfairness of pain and encourages self-reliance. The fifth factor rejects injustice in the chronic pain discourse. Overall, there is a shared view that chronic pain brings unfair treatment, disrespect and a de-legitimization of pain. Future research ideas are suggested.

  15. Statistical investigation of Kluyveromyces lactis cells permeabilization with ethanol by response surface methodology.

    Science.gov (United States)

    de Faria, Janaína T; Rocha, Pollyana F; Converti, Attilio; Passos, Flávia M L; Minim, Luis A; Sampaio, Fábio C

    2013-12-01

    The aim of our study was to select the optimal operating conditions to permeabilize Kluyveromyces lactis cells using ethanol as a solvent as an alternative to cell disruption and extraction. Cell permeabilization was carried out by a non-mechanical method consisting of chemical treatment with ethanol, and the results were expressed as β-galactosidase activity. Experiments were conducted under different conditions of ethanol concentration, treatment time and temperature according to a central composite rotatable design (CCRD), and the collected results were then worked out by response surface methodology (RSM). Cell permeabilization was improved by an increase in ethanol concentration and simultaneous decreases in the incubation temperature and treatment time. Such an approach allowed us to identify an optimal range of the independent variables within which the β-galactosidase activity was optimized. A maximum permeabilization of 2,816 mmol L(-1) oNP min(-1) g(-1) was obtained by treating cells with 75.0% v/v of ethanol at 20.0 °C for 15.0 min. The proposed methodology resulted to be effective and suited for K. lactis cells permeabilization at a lab-scale and promises to be of possible interest for future applications mainly in the food industry.

  16. The phenomenology of Merleau-Ponty in investigations about medication use: constructing a methodological cascade.

    Science.gov (United States)

    Nascimento, Yone de Almeida; Filardi, Agnes Fonseca Ribeiro; Abath, André Joffily; Silva, Luciana Diniz; Ramalho-de-Oliveira, Djenane

    2017-01-01

    Merleau-Ponty innovated when giving primacy to the body and perception in his philosophical proposal. Within the field of health, his thinking gives us access to the knowledge gained from the corporeality of individuals with chronic diseases. The objective of this study was to expand the understanding of phenomena associated with the daily use of medication, which includes increasingly complex drug regimes, through the lens of Merleau-Ponty. To this end, we described the research steps anchored in his phenomenological philosophy and structured them in the form of a cascade, beginning with the definition of phenomenology as a new form of epistemology, existence as a paradigm, and the body as a theory. Furthermore, the methodology included the use of existential structures, namely, time, space, relationships with others, and sexuality, connected through the intentional arc to reach an understanding of the phenomenon of medication use.

  17. The phenomenology of Merleau-Ponty in investigations about medication use: constructing a methodological cascade

    Directory of Open Access Journals (Sweden)

    Yone de Almeida Nascimento

    2018-03-01

    Full Text Available ABSTRACT Merleau-Ponty innovated when giving primacy to the body and perception in his philosophical proposal. Within the field of health, his thinking gives us access to the knowledge gained from the corporeality of individuals with chronic diseases. The objective of this study was to expand the understanding of phenomena associated with the daily use of medication, which includes increasingly complex drug regimes, through the lens of Merleau-Ponty. To this end, we described the research steps anchored in his phenomenological philosophy and structured them in the form of a cascade, beginning with the definition of phenomenology as a new form of epistemology, existence as a paradigm, and the body as a theory. Furthermore, the methodology included the use of existential structures, namely, time, space, relationships with others, and sexuality, connected through the intentional arc to reach an understanding of the phenomenon of medication use.

  18. Modeling and analysis of power processing systems: Feasibility investigation and formulation of a methodology

    Science.gov (United States)

    Biess, J. J.; Yu, Y.; Middlebrook, R. D.; Schoenfeld, A. D.

    1974-01-01

    A review is given of future power processing systems planned for the next 20 years, and the state-of-the-art of power processing design modeling and analysis techniques used to optimize power processing systems. A methodology of modeling and analysis of power processing equipment and systems has been formulated to fulfill future tradeoff studies and optimization requirements. Computer techniques were applied to simulate power processor performance and to optimize the design of power processing equipment. A program plan to systematically develop and apply the tools for power processing systems modeling and analysis is presented so that meaningful results can be obtained each year to aid the power processing system engineer and power processing equipment circuit designers in their conceptual and detail design and analysis tasks.

  19. On-site investigations of hydrocarbon contaminated soil by the Pollut-Eval methodology

    International Nuclear Information System (INIS)

    Benoit, Y.; Prigent, S.; Haeseler, F.

    2005-01-01

    The Pollut-Eval method is based on the Rock-Eval pyrolysis method, founded on an IFP patent that has been used for decades for oil prospecting in sedimentary basins all over the world. This equipment provides data on the quantity and the quality of organic matter in sedimentary rocks. With the increasing demand for cost effective and rapid contaminated site diagnosis, it became obvious that the field of application of the Rock-Eval technology should be enlarged to environmental problematic. The Pollut-Eval methodology was developed since 1996 and firstly qualified through the design of a laboratory version. Compared to the previous apparatus dedicated to the geochemistry, innovations allow acquisition of data for accurate quantification of complex organic pollutants and mineral carbon distribution. New methods were developed especially for the characterisation of hydrocarbon pollutants in soil. Compared to kerogen analysis, the characterisation of light petroleum cuts entrapped in soil as pollutants was available by the design of an adapted refrigerated auto-sampler. The prevention of the loss of the high vapour tension pollutants couldn't be avoided for the new environmental field of applications. Site after site, the various experiments involving the 'laboratory' version of the Pollut-Eval analyser extended the application field of the methodology. The efficiency of the thermal extraction applied directly on the soil showed useful advantages compared to conventional solvent extraction techniques, especially for pollutants originating from former gas plants. The method was especially suitable for the determination of the complete carbon mass balance in the case of non-extractable organic pollutant such as coal tar or for heavy petroleum cut such as heavy fuel, vacuum distillation residue and bitumen. By the way, the Pollut-Eval method became rapidly complementary to more conventional GC quantification dedicated to complex organic pollution characterisation. By the

  20. Thermal disposal of waste containing nanomaterials: first investigations on a methodology for risk management

    International Nuclear Information System (INIS)

    Ounoughene, G.; Joubert, A.; Le Coq, L.; LeBihan, O.; Debray, B.; Chivas-Joly, C.; Longuet, C.; Lopez-Cuesta, J-M.

    2017-01-01

    Considering the wide use and production of NMs since last two decades, these trendy nanomaterials (NMs) are expected to end up in thermal disposal and waste incineration plants (WIP). It seems relevant to assess the risks related to the thermal disposal and incineration of waste containing NMs (WCNMs). The objective of this work is to present a first approach to develop a preliminary methodology for risk management in order (1) to give insights on nanosafety of exposed operators and on potential environmental risks related to the incineration and thermal disposal of WCNMs, and (2) to eventually support decision-makers and incineration plant managers. Therefore, the main challenge is to find (a) key parameter(s) which would govern the decision related to risk management of NMs thermal disposal. On the one hand, we focused on the relevant literature studies about experimental works on incineration of NMs. On the other hand, we conducted an introductory discussion with a group of experts. The review of this literature highlights that the nano-object’s nanostructure destruction appears as a relevant indicator of the risks related to the NMs incineration. As a consequence, we defined a “temperature of nanostructure destruction” (TND) which would be the temperature from which the nanostructure will be destroyed. This parameter has been assumed to be a consistent indicator to develop a preliminary methodology. If the combustion chamber temperature is higher than the TND of the NM (or if they are close to each other), then the nanostructure will be destroyed and no risks related to NMs remain. If the TND of the NMs is higher than the combustion chamber temperature, then the nanostructure will not be destroyed and risks related to NMs have to be considered. As a result, five groups of NMs have been identified. WCNMs including carbonic NMs appear to be in good position to be destroyed safely in WIP. On the other hand, based on this criterion, there would be no

  1. Thermal disposal of waste containing nanomaterials: first investigations on a methodology for risk management

    Science.gov (United States)

    Ounoughene, G.; LeBihan, O.; Debray, B.; Chivas-Joly, C.; Longuet, C.; Joubert, A.; Lopez-Cuesta, J.-M.; Le Coq, L.

    2017-06-01

    Considering the wide use and production of NMs since last two decades, these trendy nanomaterials (NMs) are expected to end up in thermal disposal and waste incineration plants (WIP). It seems relevant to assess the risks related to the thermal disposal and incineration of waste containing NMs (WCNMs). The objective of this work is to present a first approach to develop a preliminary methodology for risk management in order (1) to give insights on nanosafety of exposed operators and on potential environmental risks related to the incineration and thermal disposal of WCNMs, and (2) to eventually support decision-makers and incineration plant managers. Therefore, the main challenge is to find (a) key parameter(s) which would govern the decision related to risk management of NMs thermal disposal. On the one hand, we focused on the relevant literature studies about experimental works on incineration of NMs. On the other hand, we conducted an introductory discussion with a group of experts. The review of this literature highlights that the nano-object’s nanostructure destruction appears as a relevant indicator of the risks related to the NMs incineration. As a consequence, we defined a “temperature of nanostructure destruction” (TND) which would be the temperature from which the nanostructure will be destroyed. This parameter has been assumed to be a consistent indicator to develop a preliminary methodology. If the combustion chamber temperature is higher than the TND of the NM (or if they are close to each other), then the nanostructure will be destroyed and no risks related to NMs remain. If the TND of the NMs is higher than the combustion chamber temperature, then the nanostructure will not be destroyed and risks related to NMs have to be considered. As a result, five groups of NMs have been identified. WCNMs including carbonic NMs appear to be in good position to be destroyed safely in WIP. On the other hand, based on this criterion, there would be no

  2. Adsorption of malachite green by magnetic litchi pericarps: A response surface methodology investigation.

    Science.gov (United States)

    Zheng, Hao; Qi, Jinqiu; Jiang, Ruixue; Gao, Yan; Li, Xiaochen

    2015-10-01

    In this work, we synthesized a novel magnetic adsorbent containing litchi pericarps, denoted as MLP, for the removal of malachite green (MG) from solution. The factors influencing MG adsorption, such as contact time, adsorbent dosage, and initial dye concentration, were optimized using the Box-Behnken response surface methodology (RSM). The adsorption isotherms as well as the kinetics and thermodynamics of the adsorption of MG onto MLP are discussed. The results showed that MLP has a maximum adsorption efficiency of 99.5% when the temperature, pH, contact time, adsorbent dosage, and initial MG concentration were optimally set as 25 °C, 6.0, 66.69 min, 5.14 g/L, and 150 mg/L, respectively. The best model to describe this process is the Langmuir isotherm, with the maximum adsorption capacity being 70.42 mg/g. In addition, the kinetics of MG adsorption onto MLP followed a pseudo-second-order model; moreover, thermodynamic analysis suggested that MG adsorption onto MLP is spontaneous and endothermic. Finally, it was found that the new magnetic adsorbent can be separated easily and rapidly from mixed solutions in the presence of an external magnetic field. Copyright © 2015 Elsevier Ltd. All rights reserved.

  3. Mass Spectrometric Methodologies for Investigating the Metabolic Signatures of Parkinson's Disease: Current Progress and Future Perspectives.

    Science.gov (United States)

    Gill, Emily L; Koelmel, Jeremy P; Yost, Richard A; Okun, Michael S; Vedam-Mai, Vinata; Garrett, Timothy J

    2018-03-06

    Parkinson's disease (PD) is a neurodegenerative disorder resulting from the loss of dopaminergic neurons of the substantia nigra as well as degeneration of motor and nonmotor basal ganglia circuitries. Typically known for classical motor deficits (tremor, rigidity, bradykinesia), early stages of the disease are associated with a large nonmotor component (depression, anxiety, apathy, etc.). Currently, there are no definitive biomarkers of PD, and the measurement of dopamine metabolites does not allow for detection of prodromal PD nor does it aid in long-term monitoring of disease progression. Given that PD is increasingly recognized as complex and heterogeneous, involving several neurotransmitters and proteins, it is of importance that we advance interdisciplinary studies to further our knowledge of the molecular and cellular pathways that are affected in PD. This approach will possibly yield useful biomarkers for early diagnosis and may assist in the development of disease-modifying therapies. Here, we discuss preanalytical factors associated with metabolomics studies, summarize current mass spectrometric methodologies used to evaluate the metabolic signature of PD, and provide future perspectives of the rapidly developing field of MS in the context of PD.

  4. Methodology and results of investigations of physical parameters of high-temperature reactors

    International Nuclear Information System (INIS)

    Cherepnin, Yu.S.; Chertkov, Yu.B.

    1995-01-01

    A physical investigations of reactors of stand complexes Baikal-1 and IGR have been carrying out more 30 years. Measuring methods of the physical investigations were divided into 2 groups: 1) methods for measuring of reactivity effects; 2) methods for measuring relative and absolute values of neutron flux and power release. The physical investigations on the reactors IVG-1 and IGR were carryied out under following conditions: during physical starts-up of regular variants of reactor cores; during energy starts-up of the reactors; before beginning of new loop chanel tests of the reactors; during research hot starts-up of the reactors the physical parameters were controled. The most full and authentic information about studied reactor have been providing by physical investigations. In 1984 physical investigations were carryied out on the IGR reactor and then the hot start-up of the mostest power and mostest large on fuel loading loop chanel was carryied out. This chanel contained 6 fuel assemblies with the summary fuel loading 3,06 kilogrammes of uranium and it was calculated for power equal to 20 MW. In 1988 the physical investigations for selection of project process chanels destined for new water cooled reactor core were carryied out. In 1993 the neutron-physical calculation on possibility of tests for the rector Nerva fuel element was carryied out. 9 refs., 4 figs

  5. An investigation of the critical components of a land ethic: An application of Q methodology

    Science.gov (United States)

    Spradling, Suzanne Shaw

    Scope and method of study. The purpose of this study was to reveal the underlying structure of the beliefs of a sample of environmental educators regarding the critical components of a land or environmental ethic. Participants in the study were 30 environmental educators from seven states. All had been trained in one or more of the following national environmental education programs: Project WILD, Project WET, Project Learning Tree, Leopold Education Project, or Leave No Trace. Ages of the participants ranged from 18--63 years. Q methodology directed the study. Each participant completed a Q-sort of 54 statements related to environmental ethics. The data were analyzed using a computer program PQMethod 2.06. This program performed a correlation matrix as input data for factor analysis, and a VARIMAX rotation. Participant demographic data were collected in order to provide a more complete picture of the revealed structure of beliefs. Findings and conclusions. A three-factor solution was revealed from the analysis of the data. These factors represent the groupings of the participants with like beliefs in reference to the critical components of environmental ethics. Factor one was named Nature's Advocates. These individuals believe in equal rights for all parts of the environment. Factor two was named Nature's Stewards because of the revealed belief that humans were to have dominion over the earth given to them by the creator and that natural resources should be used responsibly. Factor three was named Nature's Romantics because of their belief that nature should be preserved for its aesthetic value and because of their naive approach to conservation. The demographic data added detail to the portrait created from the Q-sort data analysis. It is important then, to take into consideration what environmental educators believe about environmental ethics in designing meaningful curriculum that seeks to foster the development of those ethics. This study reveals the beliefs

  6. Applying the AcciMap methodology to investigate the tragic Sewol Ferry accident in South Korea.

    Science.gov (United States)

    Lee, Samuel; Moh, Young Bo; Tabibzadeh, Maryam; Meshkati, Najmedin

    2017-03-01

    This study applies the AcciMap methodology, which was originally proposed by Professor Jens Rasmussen (1997), to the analysis of the tragic Sewol Ferry accident in South Korea on April 16, 2014, which killed 304 mostly young people and is considered as a national disaster in that country. This graphical representation, by incorporating associated socio-technical factors into an integrated framework, provides a big-picture to illustrate the context in which an accident occurred as well as the interactions between different levels of the studied system that resulted in that event. In general, analysis of past accidents within the stated framework can define the patterns of hazards within an industrial sector. Such analysis can lead to the definition of preconditions for safe operations, which is a main focus of proactive risk management systems. In the case of the Sewol Ferry accident, a lot of the blame has been placed on the Sewol's captain and its crewmembers. However, according to this study, which relied on analyzing all available sources published in English and Korean, the disaster is the result of a series of lapses and disregards for safety across different levels of government and regulatory bodies, Chonghaejin Company, and the Sewol's crewmembers. The primary layers of the AcciMap framework, which include the political environment and non-proactive governmental body; inadequate regulations and their lax oversight and enforcement; poor safety culture; inconsideration of human factors issues; and lack of and/or outdated standard operating and emergency procedures were not only limited to the maritime industry in South Korea, and the Sewol Ferry accident, but they could also subject any safety-sensitive industry anywhere in the world. Copyright © 2016 Elsevier Ltd. All rights reserved.

  7. Methodologic principles of regulation of patient irradiation during X-ray investigations

    International Nuclear Information System (INIS)

    Vorob'ev, E.I.; Knizhnikov, V.A.; Stavitskij, R.V.; Barkhudarov, R.M.; Lyass, F.M.; Lebedev, L.A.

    1986-01-01

    Attention is paid to the regulation of radiation doses in biomedical radiography on the basis of cost-benefit concept i.e. using optimization principle. Conceptual bases and main dose limits for roentgenological investigations are suggested. Radiation doses and information value from the application of roentgenological investigations for different patients are unequal and depend on the desease type and nature. Three categories of patients subjected to roentgenological examinations are separated: Asub(d)-persons having oncologic desease or with suspicion for it, Bsub(d)-persons which are examined to define diagnosis and to select thrapeutic method in connection with nononcologic deseases, Csub(d)-persons which are subjected to procedures both with preventive and investigative purpose. For Asub(d) category persons radiation doses to all organs should not exceed 0.5 Sv (to eye lens-0.3 Sv), for Bsub(d) category-1/3 of maximum permissible dose to personel envisaged in radiation protection guides (RPG-76), for Csub(d) category-0.5 Sv/year. Control level of dose equivalents limiting different organs exposure due to routine roentgenological procedures, which were obtained by means of dosimetric investigations using tissue-equivalent phantom of a reference man, are presented

  8. Ruthenium-Catalyzed Transformations of Alcohols: Mechanistic Investigations and Methodology Development

    DEFF Research Database (Denmark)

    Makarov, Ilya; Madsen, Robert; Fristrup, Peter

    with dimethoxyisopropylidene and pyridilidene ligands could be more active than RuCl2(IiPr)(p-cymene) used in the mechanistic investigation. Two analogs of the calculated complexes were synthesized but were not isolated in a pure form. The amidation reaction catalyzed by a mixture containing the N-ethyl pyridilidene...

  9. The Value of Adopting Multiple Approaches and Methodologies in the Investigation of Ethnolinguistic Vitality

    Science.gov (United States)

    McEntee-Atalianis, Lisa J.

    2011-01-01

    The concept of "Ethnolinguistic Vitality" (EV) has received variable acceptance and support since its introduction by Giles, Bourhis, and Taylor. It has especially proven to be a valuable heuristic in studies of language maintenance and shift. However, the reliability and validity of the instruments used to investigate EV, especially…

  10. Methodological approaches to investigate the effects of meaning, expectations and context in listening experiments

    DEFF Research Database (Denmark)

    Zeitler, Alfred; Hellbrueck, Jürgen; Ellermeier, Wolfgang

    2006-01-01

    Cognitive factors in sound evaluation have received an increasing amount of attention over the past years, and specific effects of meaning, expectations, and context have been under empirical investigation. The present paper is intended to contribute to the theoretical definition of these concepts...

  11. Parameters Investigation of Mathematical Model of Productivity for Automated Line with Availability by DMAIC Methodology

    Directory of Open Access Journals (Sweden)

    Tan Chan Sin

    2014-01-01

    Full Text Available Automated line is widely applied in industry especially for mass production with less variety product. Productivity is one of the important criteria in automated line as well as industry which directly present the outputs and profits. Forecast of productivity in industry accurately in order to achieve the customer demand and the forecast result is calculated by using mathematical model. Mathematical model of productivity with availability for automated line has been introduced to express the productivity in terms of single level of reliability for stations and mechanisms. Since this mathematical model of productivity with availability cannot achieve close enough productivity compared to actual one due to lack of parameters consideration, the enhancement of mathematical model is required to consider and add the loss parameters that is not considered in current model. This paper presents the investigation parameters of productivity losses investigated by using DMAIC (Define, Measure, Analyze, Improve, and Control concept and PACE Prioritization Matrix (Priority, Action, Consider, and Eliminate. The investigated parameters are important for further improvement of mathematical model of productivity with availability to develop robust mathematical model of productivity in automated line.

  12. Is case-chaos methodology an appropriate alternative to conventional case-control studies for investigating outbreaks?

    Science.gov (United States)

    Edelstein, Michael; Wallensten, Anders; Kühlmann-Berenzon, Sharon

    2014-08-15

    Case-chaos methodology is a proposed alternative to case-control studies that simulates controls by randomly reshuffling the exposures of cases. We evaluated the method using data on outbreaks in Sweden. We identified 5 case-control studies from foodborne illness outbreaks that occurred between 2005 and 2012. Using case-chaos methodology, we calculated odds ratios 1,000 times for each exposure. We used the median as the point estimate and the 2.5th and 97.5th percentiles as the confidence interval. We compared case-chaos matched odds ratios with their respective case-control odds ratios in terms of statistical significance. Using Spearman's correlation, we estimated the correlation between matched odds ratios and the proportion of cases exposed to each exposure and quantified the relationship between the 2 using a normal linear mixed model. Each case-control study identified an outbreak vehicle (odds ratios = 4.9-45). Case-chaos methodology identified the outbreak vehicle 3 out of 5 times. It identified significant associations in 22 of 113 exposures that were not associated with outcome and 5 of 18 exposures that were significantly associated with outcome. Log matched odds ratios correlated with their respective proportion of cases exposed (Spearman ρ = 0.91) and increased significantly with the proportion of cases exposed (b = 0.054). Case-chaos methodology missed the outbreak source 2 of 5 times and identified spurious associations between a number of exposures and outcome. Measures of association correlated with the proportion of cases exposed. We recommended against using case-chaos analysis during outbreak investigations. © The Author 2014. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  13. Chemical Flooding in Heavy-Oil Reservoirs: From Technical Investigation to Optimization Using Response Surface Methodology

    Directory of Open Access Journals (Sweden)

    Si Le Van

    2016-09-01

    rather than using a water slug in between. The results of the pre-evaluation show that two sequences of the ASP group have the highest NPV corresponding to the dissimilar applied oil prices. In the post-evaluation, the successful use of response surface methodology (RSM in the estimation and optimization procedures with coefficients of determination R2 greater than 0.97 shows that the project can possibly gain 4.47 $MM at a mean oil price of 46.5 $/bbl with the field scale of a quarter five-spot pattern. Further, with the novel assumption of normal distribution for the oil price variation, the chemical flooding sequence of concurrent alkali-surfactant-polymer injection with a buffering polymer solution is evaluated as the most feasible scheme owing to the achievement of the highest NPV at the highly possible oil price of 40–55 $/bbl compared to the other scheme.

  14. The Applicability of Army Design Methodology to the Federal Bureau of Investigation

    Science.gov (United States)

    2011-05-19

    Fidelity Bravery Integrity,” was tarnished by scandals in the 1960s, 1970s, 1980s, and 1990s, and further scarred by intelligence and...have been investigating after the Watergate break-in, he just carried to the extreme an established practice of service to the White House. The other...source that a “ scandal ” was brewing and that it would be very embarrassing to the Democratic administration.” A third contained the report of a “very

  15. Methodology optimization and diversification for the investigation of virulence potential in Haemophilus influenzae clinical strains.

    Science.gov (United States)

    Giucă, Mihaela Cristina; Străuţ, Monica; Surdeanu, Maria; Nica, Maria; Ungureanu, Vasilica; Mihăescu, Grigore

    2011-01-01

    Ten Haemophilus influenzae strains were isolated from patients aged between 1.6 - 24 years, with various diagnoses (acute meningitis, acute upper respiratory infection, otitis media and acute sinusitis). Identification was based on phenotypic and molecular characteristics; antibiotic susceptibility testing was performed by diffusion method according to CLSI standards 2011 for seven antibiotics. The results of molecular testing showed that all the studied strains produced an amplicon of 1000 bp with ompP2 primers indicating that all strains were H. influenzae. For six strains, the PCR amplicon obtained with bexA specific primers, proving that the strains were capsulated. The results of phenotypic testing showed that four strains were ampicillin nonsusceptible and (beta-lactamase-positive. The virulence potential of H. influenzae clinical strains was investigated by phenotypic methods, including the assessment of the soluble virulence factors on specific media containing the biochemical substratum for the investigated enzymatic factor, as well as the adherence and invasion capacity to HeLa cells monolayer using Cravioto modified method. The studied strains exhibited mainly a diffuse adherence pattern and different adherence indexes. Interestingly, two strains isolated from the same pacient (blood and CSF) showed a different degree of invasiveness, the strain isolated from blood being 20 times more invasive than the one isolated from CSF.

  16. Risk-based assessment of the surety of information systems

    Energy Technology Data Exchange (ETDEWEB)

    Jansma, R.M.; Fletcher, S.K.; Murphy, M.D.; Lim, J.J.; Wyss, G.D.

    1996-07-01

    When software is used in safety-critical, security-critical, or mission-critical situations, it is imperative to understand and manage the risks involved. A risk assessment methodology and toolset have been developed which are specific to software systems and address a broad range of risks including security, safety, and correct operation. A unique aspect of this methodology is the use of a modeling technique that captures interactions and tradeoffs among risk mitigators. This paper describes the concepts and components of the methodology and presents its application to example systems.

  17. Methodology and application of flow cytometry for investigation of human malaria parasites.

    Science.gov (United States)

    Grimberg, Brian T

    2011-03-31

    Historically, examinations of the inhibition of malaria parasite growth/invasion, whether using drugs or antibodies, have relied on the use of microscopy or radioactive hypoxanthine uptake. These are considered gold standards for measuring the effectiveness of antimalarial treatments, however, these methods have well known shortcomings. With the advent of flow cytometry coupled with the use of fluorescent DNA stains allowed for increased speed, reproducibility, and qualitative estimates of the effectiveness of antibodies and drugs to limit malaria parasite growth which addresses the challenges of traditional techniques. Because materials and machines available to research facilities are so varied, different methods have been developed to investigate malaria parasites by flow cytometry. This review is intended to serve as a reference guide for advanced users and importantly, as a primer for new users, to support expanded use and improvements to malaria flow cytometry, particularly in endemic countries. Copyright © 2011 Elsevier B.V. All rights reserved.

  18. An investigation of structural design methodology for HTGR reactor internals with ceramic materials (Contract research)

    International Nuclear Information System (INIS)

    Sumita, Junya; Shibata, Taiju; Nakagawa, Shigeaki; Iyoku, Tatsuo; Sawa, Kazuhiro

    2008-03-01

    To advance the performance and safety of HTGR, heat-resistant ceramic materials are expected to be used as reactor internals of HTGR. C/C composite and superplastic zirconia are the promising materials for this purpose. In order to use these new materials as reactor internals in HTGR, it is necessary to establish a structure design method to guarantee the structural integrity under environmental and load conditions. Therefore, C/C composite expected as reactor internals of VHTR is focused and an investigation on the structural design method applicable to the C/C composite and a basic applicability of the C/C composite to representative structures of HTGR were carried out in this report. As the results, it is found that the competing risk theory for the strength evaluation of the C/C composite is applicable to design method and C/C composite is expected to be used as reactor internals of HTGR. (author)

  19. Aespoe hard rock laboratory. Field investigation methodology and instruments used in the preinvestigation phase, 1986-1990

    International Nuclear Information System (INIS)

    Almen, K.E.; Zellman, O.

    1991-12-01

    The Aespoe hard rock laboratory project started in 1986. The pre-investigation phase, 1986-1990, involved extensive field measurements from the surface as well as from boreholes, aimed at characterizing the rock formation with regard to geology, geohydrology, hydrochemistry and rock mechanics. The field investigation methodology used in the project was based on experience from and developments during the previous SKB study site investigation programme. However, in some respects the techniques were changed or modified. Major changes have been possible due to a new drilling technique, telescope-type drilling. This report describes the logistics of the investigation programme, characterized to a large extent by multi-purpose planning and performance of the activities in order to optimize the use of available resources; time, personnel and equipment. Preliminary hydraulic testing and groundwater sampling were conducted during the drilling of each borehole. When the drilling was completed an extensive set of singlehole investigations were carried out: geophysical logging, borehole radar, hydraulic tests of different kinds, water sampling and rock stress measurements. Multipackers were installed in the boreholes as soon as possible after the borehole investigations. The system enables monitoring of groundwater pressure, water sampling and groundwater flow measurements to be performed by means of dilution tests and tracer injection. Boreholes with such equipment were used as observation holes during interference pumping tests and long term hydraulic and tracer tests. The monitoring programme will continue during the subsequent phases of construction and operation of the Aespoe hard rock laboratory. (83 refs., 94 figs.) (au)

  20. Quantum Dot Nanotoxicity Investigations Using Human Lung Cells and TOXOR Electrochemical Enzyme Assay Methodology.

    Science.gov (United States)

    O'Hara, Tony; Seddon, Brian; O'Connor, Andrew; McClean, Siobhán; Singh, Baljit; Iwuoha, Emmanuel; Fuku, Xolile; Dempsey, Eithne

    2017-01-27

    Recent studies have suggested that certain nanomaterials can interfere with optically based cytotoxicity assays resulting in underestimations of nanomaterial toxicity. As a result there has been growing interest in the use of whole cell electrochemical biosensors for nanotoxicity applications. Herein we report application of an electrochemical cytotoxicity assay developed in house (TOXOR) in the evaluation of toxic effects of mercaptosuccinic acid capped cadmium telluride quantum dots (MSA capped CdTe QDs), toward mammalian cells. MSA capped CdTe QDs were synthesized, characterized, and their cytotoxicity toward A549 human lung epithelial cells investigated. The internalization of QDs within cells was scrutinized via confocal microscopy. The cytotoxicity assay is based on the measurement of changes in cellular enzyme acid phosphatase upon 24 h exposure to QDs. Acid phosphatase catalyzes dephosphorylation of 2-naphthyl phosphate to 2-naphthol (determined by chronocoulometry) and is indicative of metabolic activity in cells. The 24 h IC50 (concentration resulting in 50% reduction in acid phosphatase activity) value for MSA capped CdTe QDs was found to be 118 ± 49 μg/mL using the TOXOR assay and was in agreement with the MTT assay (157 ± 31 μg/mL). Potential uses of this electrochemical assay include the screening of nanomaterials, environmental toxins, in addition to applications in the pharmaceutical, food, and health sectors.

  1. Methodology for the investigation of ignition near hot surfaces in a high-pressure shock tube

    Science.gov (United States)

    Niegemann, P.; Fikri, M.; Wlokas, I.; Röder, M.; Schulz, C.

    2018-05-01

    Autoignition of fuel/air mixtures is a determining process in internal combustion engines. Ignition can start either homogeneously in the gas phase after compression or in the vicinity of hot surfaces. While ignition properties of commercial fuels are conventionally described by a single quantity (octane number), it is known that some fuels have a varying propensity to the two processes. We present a new experimental concept that generates well-controlled temperature inhomogeneities in the shock-heated gases of a high-pressure shock tube. A shock-heated reactive mixture is brought into contact with a heated silicon nitride ceramic glow plug. The glow-plug temperature can be set up to 1200 K, higher than the post-reflected-shock gas temperatures (650-1050 K). High-repetition-rate chemiluminescence imaging is used to localize the onset of ignition in the vicinity of the hot surface. In experiments with ethanol, the results show that in most cases under shock-heated conditions, the ignition begins inhomogeneously in the vicinity of the glow plug and is favored because of the high wall temperature. Additionally, the interaction of geometry, external heating, and gas-dynamic effects was investigated by numerical simulations of the shock wave in a non-reactive flow.

  2. Investigating ideomotor cognition with motorvisual priming paradigms: Key findings, methodological challenges, and future directions

    Directory of Open Access Journals (Sweden)

    Roland eThomaschke

    2012-11-01

    Full Text Available Ideomotor theory claims that perceptual representations of action effects are functionally involved in the planning of actions. Strong evidence for this claim comes from a phenomenon called motorvisual priming. Motorvisual priming refers to the finding that action planning directly affects perception, and that the effects are selective for stimuli that share features with the planned action. Motorvisual priming studies have provided detailed insights into the processing of perceptual representations in action planning. One important finding is that such representations in action planning have a categorical format, whereas metric representations are not anticipated in planning. Further essential findings regard the processing mechanisms and the time course of ideomotor cognition. Perceptual representations of action effects are first activated by action planning and then bound into a compound representation of the action plan. This compound representation is stabilized throughout the course of the action by the shielding of all involved representations from other cognitive processes. Despite a rapid growth in the number of motorvisual priming studies in the current literature, there are still many aspects of ideomotor cognition which have not yet been investigated. These aspects include the scope of ideomotor processing with regard to action types and stimulus types, as well as the exact nature of the binding and shielding mechanisms involved.

  3. Investigation of antimicrobial use at a tertiary care hospital in Southern Punjab, Pakistan using WHO methodology.

    Science.gov (United States)

    Atif, Muhammad; Azeem, Muhammad; Saqib, Anum; Scahill, Shane

    2017-01-01

    Globally, between 20 to 50% of antimicrobial consumption is inappropriate, causing significant impact on the quality of care, cost of therapy and incidence of adverse drug reactions. The purpose of this study was to investigate the prescribing patterns and utilization of antimicrobials in ten selected wards at Bahawal Victoria Hospital (BVH), Bahawalpur, Punjab, Pakistan. A descriptive cross-sectional study was designed using the World Health Organization (WHO) indicators for antimicrobial use. Standard data collection forms were used in ten wards and the Pharmacy Department at BVH. Antimicrobial utilization patterns in terms of frequency and percentage were also determined. Systematic random sampling techniques were used to collect data from 1,000 prescription records out of 21,115 prescriptions written for the six months January to June 2016. For the hospital indicators, a formulary list or essential medicines list (FL/EML) was available, but standard treatment guidelines (STGs) for infectious diseases was not. The average number of days that key antimicrobials were out of stock was 3.3 days per month. The expenditure on antimicrobials as a percentage of the total medicines costs was 12.2%. For the prescribing indicators, the percentage of hospitalizations with antimicrobial(s) prescribed was 82.3%, and the average number of antimicrobials per hospitalization was 1.4 (SD = 0.6). The average duration of antimicrobial treatment per hospitalization was 5.4 days (SD = 3.2). The average cost of antimicrobials prescribed per hospitalization was USD 5.4 (SD = 6.7). None of the patients who were prescribed antimicrobials, received AM according to the STGs (pneumonia and cesarean section cases). Among the patient-care and supplemental indicators, the average duration of hospital stay of patients who received antimicrobials was 6.4 (SD = 4.3) days. The drug sensitivity testing was almost non-existent, with only 0.24% prescription records having drug

  4. Chemical surety material decontamination and decommissioning of Los Alamos National Laboratory Chemical Surety Material Laboratory area TA-3, building SM-29, room 4009

    International Nuclear Information System (INIS)

    Moore, T.E.; Smith, J.M.

    1994-04-01

    From 1982 through 1987, Los Alamos National Laboratory (LANL) performed surety laboratory operations for the U.S. Army Medical Research and Development Command (MRDC). Room 4009 in building SM-29, TA-3, was used as the laboratory for work with the following chemical surety material (CSM) agents: sarin (GB), soman (GD), lewisite (L), and distilled mustard (HD) radio-labelled with H 3 or C 14 . The work was confined to three CSM-certified fume hoods, located in room 4009 (see diagram in Appendix C). The laboratory ceased all active operations during the late 1986 and early 1987 period. From 1987 until 1993 the laboratory was secured and the ventilation system continued to operate. During late 1992, the decision was made to utilize this laboratory space for other operations, thus a decision was made to dismantle and reconfigure this room. LANL sub-contracted Battelle Memorial Institute (BMI) to draw upon the CSM experience of the technical staff from the Hazardous Materials Research Facility (HMRF) to assist in developing a decontamination and decommissioning plan. BMI was subcontracted to devise a CSM safety training course, and a sampling and air monitoring plan for CSM material to ensure personnel safety during all disassembly operations. LANL subcontracted Johnson Controls personnel to perform all disassembly operations. Beginning in early 1993 BMI personnel from the HMRF visited the laboratory to develop both the safety plan and the sample and air monitoring plan. Execution of that plan began in September 1993 and was completed in January 1994

  5. Investigation on the static and dynamic structural behaviors of a regional aircraft main landing gear by a new numerical methodology

    Directory of Open Access Journals (Sweden)

    Francesco Caputo

    2018-01-01

    Full Text Available In this paper, a new methodology supporting the design of landing gears is proposed. Generally, a preliminary step is performed with simplified FE model, usually one-dimensional, to achieve the reaction forces involving each component during all aforementioned aircraft operations. Though this approach gives a valid support to the designer, it is characterized by several problems, such as the related approximations. So, it is important, by a numerical point of view, to develop an isostatic FE model equivalent to the real one. In fact, if the landing gear is modelled as hyperstatic, the static equilibrium equations are insufficient for determining the internal forces and reactions on each sub-component; so, the modelled material properties and geometries assume an increasing importance, which gets the model too approximating. The proposed methodology consists of achieving the reaction forces by means of multibody simulations, by overcoming such problems, since each component is modelled as rigid. In this paper, also a FE model for the investigation of the structural response is proposed. Aimed to Certification by Analysis purposes, the developed multibody and the FE models have been assessed against an experimental landing gear drop test carried out by Magnaghi Aeronautica S.p.A., according to the EASA CS 25 regulations

  6. Combining Behavioral and ERP Methodologies to Investigate the Differences Between McGurk Effects Demonstrated by Cantonese and Mandarin Speakers

    Directory of Open Access Journals (Sweden)

    Juan Zhang

    2018-05-01

    Full Text Available The present study investigated the impact of Chinese dialects on McGurk effect using behavioral and event-related potential (ERP methodologies. Specifically, intra-language comparison of McGurk effect was conducted between Mandarin and Cantonese speakers. The behavioral results showed that Cantonese speakers exhibited a stronger McGurk effect in audiovisual speech perception compared to Mandarin speakers, although both groups performed equally in the auditory and visual conditions. ERP results revealed that Cantonese speakers were more sensitive to visual cues than Mandarin speakers, though this was not the case for the auditory cues. Taken together, the current findings suggest that the McGurk effect generated by Chinese speakers is mainly influenced by segmental phonology during audiovisual speech integration.

  7. Combining Behavioral and ERP Methodologies to Investigate the Differences Between McGurk Effects Demonstrated by Cantonese and Mandarin Speakers

    Science.gov (United States)

    Zhang, Juan; Meng, Yaxuan; McBride, Catherine; Fan, Xitao; Yuan, Zhen

    2018-01-01

    The present study investigated the impact of Chinese dialects on McGurk effect using behavioral and event-related potential (ERP) methodologies. Specifically, intra-language comparison of McGurk effect was conducted between Mandarin and Cantonese speakers. The behavioral results showed that Cantonese speakers exhibited a stronger McGurk effect in audiovisual speech perception compared to Mandarin speakers, although both groups performed equally in the auditory and visual conditions. ERP results revealed that Cantonese speakers were more sensitive to visual cues than Mandarin speakers, though this was not the case for the auditory cues. Taken together, the current findings suggest that the McGurk effect generated by Chinese speakers is mainly influenced by segmental phonology during audiovisual speech integration. PMID:29780312

  8. Can information surety be assessed with high confidence?

    International Nuclear Information System (INIS)

    Lim, J.J.; Fletcher, S.K.; Halbgewachs, R.D.; Jansma, R.M.; Sands, P.D.; Watterberg, P.A.; Wyss, G.D.

    1994-01-01

    Several basic reasons are given to support the position that an integrated, systems methodology entailing probabilistic assessment offers the best means for addressing the problems in software safety. The recognized hard problems in software safety, or safety per se, and some of the techniques for hazard identification and analysis are then discussed relative to their specific strengths and limitations. The paper notes that it is the combination of techniques that will lead to safer systems, and that more experience, examples, and applications of techniques are needed to understand the limits to which software safety can be assessed. Lastly, some on-going project work at Sandia National Laboratories on developing a solution methodology is presented

  9. Investigating thermal-hydraulic characteristic of molten fluoride salt in a circular pipe using a CFD methodology

    International Nuclear Information System (INIS)

    Chi Chenwei; Ferng Yuhming; Pei Baushei; Liang Jenqhorng

    2011-01-01

    In recent years, the molten salt reactor (MSR) has attracted increasing attention and become one of the most important 'Generation IV reactor' designs. In particular, the fact that molten fluoride salts are utilized as liquid fuel and coolant constitutes the main feature of the reactor. Furthermore, since the molten fluoride salt has a high Prandtl number and contains quite different behaviors to those of ordinary water and gas, an in-depth investigation of molten fluoride salt is thus highly demanded. Hence, it is the central objective of this study to examine the thermal-hydraulic characteristics of molten salt especially for the optimal design of reactor core and its safety operation. In this study, the dependence of pressure drop, Nusselt number and entrance length on the inlet Reynolds number for a molten fluoride salt (LiF(46.5)-NaF(11.5)-KF(42)) are computed using a comprehensive computational fluid dynamics (CFD) methodology. The methodology employs the continuity equation, momentum equation, energy equation, and standard k - ε turbulence model to conduct fluid dynamics simulation. For simplicity, the geometry employed in this study is a circular tube. The simulated results indicated that the pressure drop and Nusselt number and entrance length increase as the inlet Reynolds number increases. And the computed pressure drop corresponds well to theoretical value. It is also given a new correlation of computed entrance length in this paper. In addition, two well-known Nusselt number correlations such as, Hausen, Gnielinski, are employed to make comparisons with the computed results. It is also found that the computed Nusselt numbers overestimate the Hausen ones in the high Reynolds number region. However, the computed Nusselt numbers correspond well to the Gnielinski ones in all the Reynolds numbers region. Also notice that an experimental setup is currently in progress in order to validate the present CFD simulation. (author)

  10. Computational methods for predicting the response of critical as-built infrastructure to dynamic loads (architectural surety)

    Energy Technology Data Exchange (ETDEWEB)

    Preece, D.S.; Weatherby, J.R.; Attaway, S.W.; Swegle, J.W.; Matalucci, R.V.

    1998-06-01

    Coupled blast-structural computational simulations using supercomputer capabilities will significantly advance the understanding of how complex structures respond under dynamic loads caused by explosives and earthquakes, an understanding with application to the surety of both federal and nonfederal buildings. Simulation of the effects of explosives on structures is a challenge because the explosive response can best be simulated using Eulerian computational techniques and structural behavior is best modeled using Lagrangian methods. Due to the different methodologies of the two computational techniques and code architecture requirements, they are usually implemented in different computer programs. Explosive and structure modeling in two different codes make it difficult or next to impossible to do coupled explosive/structure interaction simulations. Sandia National Laboratories has developed two techniques for solving this problem. The first is called Smoothed Particle Hydrodynamics (SPH), a relatively new gridless method comparable to Eulerian, that is especially suited for treating liquids and gases such as those produced by an explosive. The SPH capability has been fully implemented into the transient dynamics finite element (Lagrangian) codes PRONTO-2D and -3D. A PRONTO-3D/SPH simulation of the effect of a blast on a protective-wall barrier is presented in this paper. The second technique employed at Sandia National Laboratories uses a relatively new code called ALEGRA which is an ALE (Arbitrary Lagrangian-Eulerian) wave code with specific emphasis on large deformation and shock propagation. ALEGRA is capable of solving many shock-wave physics problems but it is especially suited for modeling problems involving the interaction of decoupled explosives with structures.

  11. Response surface methodology investigation into the interactions between arsenic and humic acid in water during the coagulation process.

    Science.gov (United States)

    Watson, Malcolm Alexander; Tubić, Aleksandra; Agbaba, Jasmina; Nikić, Jasmina; Maletić, Snežana; Molnar Jazić, Jelena; Dalmacija, Božo

    2016-07-15

    Interactions between arsenic and natural organic matter (NOM) are key limiting factors during the optimisation of drinking water treatment when significant amounts of both must be removed. This work uses Response Surface Methodology (RSM) to investigate how they interact during their simultaneous removal by iron chloride coagulation, using humic acid (HA) as a model NOM substance. Using a three factor Box-Behnken experimental design, As and HA removals were modelled, as well as a combined removal response. ANOVA results showed the significance of the coagulant dose for all three responses. At high initial arsenic concentrations (200μg/l), As removal was significantly hindered by the presence of HA. In contrast, the HA removal response was found to be largely independent of the initial As concentration, with the optimum coagulant dose increasing at increasing HA concentrations. The combined response was similar to the HA removal response, and the interactions evident are most interesting in terms of optimising treatment processes during the preparation of drinking water, highlighting the importance of utilizing RSM for such investigations. The combined response model was successfully validated with two different groundwaters used for drinking water supply in the Republic of Serbia, showing excellent agreement under similar experimental conditions. Copyright © 2016 Elsevier B.V. All rights reserved.

  12. Chemical surety material decontamination and decommissioning of Los Alamos National Laboratory Chemical Surety Material Laboratory area TA-3, building SM-29, room 4009

    Energy Technology Data Exchange (ETDEWEB)

    Moore, T.E.; Smith, J.M.

    1994-04-01

    From 1982 through 1987, Los Alamos National Laboratory (LANL) performed surety laboratory operations for the U.S. Army Medical Research and Development Command (MRDC). Room 4009 in building SM-29, TA-3, was used as the laboratory for work with the following chemical surety material (CSM) agents: sarin (GB), soman (GD), lewisite (L), and distilled mustard (HD) radio-labelled with H{sup 3} or C{sup 14}. The work was confined to three CSM-certified fume hoods, located in room 4009 (see diagram in Appendix C). The laboratory ceased all active operations during the late 1986 and early 1987 period. From 1987 until 1993 the laboratory was secured and the ventilation system continued to operate. During late 1992, the decision was made to utilize this laboratory space for other operations, thus a decision was made to dismantle and reconfigure this room. LANL sub-contracted Battelle Memorial Institute (BMI) to draw upon the CSM experience of the technical staff from the Hazardous Materials Research Facility (HMRF) to assist in developing a decontamination and decommissioning plan. BMI was subcontracted to devise a CSM safety training course, and a sampling and air monitoring plan for CSM material to ensure personnel safety during all disassembly operations. LANL subcontracted Johnson Controls personnel to perform all disassembly operations. Beginning in early 1993 BMI personnel from the HMRF visited the laboratory to develop both the safety plan and the sample and air monitoring plan. Execution of that plan began in September 1993 and was completed in January 1994.

  13. Investigating the Effect of Nanoscale Changes on the Chemistry and Energetics of Nanocrystals with a Novel Photoemission Spectroscopy Methodology

    Science.gov (United States)

    Liao, Michael W.

    This dissertation explores the effect of nanometer-scale changes in structure on the energetics of photocatalytic and photovoltaic materials. Of particular interest are semiconductor nanocrystals (NCs), which have interesting chemical properties that lead to novel structures and applications. Chief among these properties are quantum confinement and the high surface area-to-volume ratio, which allow for chemical tuning of the energetics and structure of NCs. This tunable energetic landscape has led to increasing application of NCs in various areas of research, including solar energy conversion, light-emitting diode technologies, and photocatalysis. However, spectroscopic methods to determine the energetics of NCs have not been well developed, due to chemical complexities of relevant NCs such as polydispersity, capping ligand effects, core-shell structures, and other chemical modifications. In this work, we demonstrate and expand the utility of photoelectron spectroscopy (PES) to probe the energetics of NCs by considering the physical processes that lead to background and secondary photoemission to enhance photoemission from the sample of interest. A new methodology for the interpretation of UP spectra was devised in order to emphasize the minute changes to the UP spectra line shape that arise from nanoscopic changes to the NCs. We applied various established subtractions that correct for photon source satellites, secondary photoelectrons, and substrate photoemission. We then investigated the effect of ligand surface coverage on the surface chemistry and density of states at the top of valence band (VB). We systematically removed ligands by increasing numbers of purification steps for two diameters of NCs and found that doing so increased photoemission density at the top of the VB, which is due to undercoordinated surface atoms. Deeper VB structure was also altered, possibly due to reorganization of the atoms in the NC. Using the new UPS interpretation methodology

  14. Methodological Adaptations for Investigating the Perceptions of Language-Impaired Adolescents Regarding the Relative Importance of Selected Communication Skills

    Science.gov (United States)

    Reed, Vicki A.; Brammall, Helen

    2006-01-01

    This article describes the systematic and detailed processes undertaken to modify a research methodology for use with language-impaired adolescents. The original methodology had been used previously with normally achieving adolescents and speech pathologists to obtain their opinions about the relative importance of selected communication skills…

  15. Integrated detoxification methodology of hazardous phenolic wastewaters in environmentally based trickle-bed reactors: Experimental investigation and CFD simulation

    International Nuclear Information System (INIS)

    Lopes, Rodrigo J.G.; Almeida, Teresa S.A.; Quinta-Ferreira, Rosa M.

    2011-01-01

    Centralized environmental regulations require the use of efficient detoxification technologies for the secure disposal of hazardous wastewaters. Guided by federal directives, existing plants need reengineering activities and careful analysis to improve their overall effectiveness and to become environmentally friendly. Here, we illustrate the application of an integrated methodology which encompasses the experimental investigation of catalytic wet air oxidation and CFD simulation of trickle-bed reactors. As long as trickle-bed reactors are determined by the flow environment coupled with chemical kinetics, first, on the optimization of prominent numerical solution parameters, the CFD model was validated with experimental data taken from a trickle bed pilot plant specifically designed for the catalytic wet oxidation of phenolic wastewaters. Second, several experimental and computational runs were carried out under unsteady-state operation to evaluate the dynamic performance addressing the TOC concentration and temperature profiles. CFD computations of total organic carbon conversion were found to agree better with experimental data at lower temperatures. Finally, the comparison of test data with simulation results demonstrated that this integrated framework was able to describe the mineralization of organic matter in trickle beds and the validated consequence model can be exploited to promote cleaner remediation technologies of contaminated waters.

  16. Integrated detoxification methodology of hazardous phenolic wastewaters in environmentally based trickle-bed reactors: Experimental investigation and CFD simulation.

    Science.gov (United States)

    Lopes, Rodrigo J G; Almeida, Teresa S A; Quinta-Ferreira, Rosa M

    2011-05-15

    Centralized environmental regulations require the use of efficient detoxification technologies for the secure disposal of hazardous wastewaters. Guided by federal directives, existing plants need reengineering activities and careful analysis to improve their overall effectiveness and to become environmentally friendly. Here, we illustrate the application of an integrated methodology which encompasses the experimental investigation of catalytic wet air oxidation and CFD simulation of trickle-bed reactors. As long as trickle-bed reactors are determined by the flow environment coupled with chemical kinetics, first, on the optimization of prominent numerical solution parameters, the CFD model was validated with experimental data taken from a trickle bed pilot plant specifically designed for the catalytic wet oxidation of phenolic wastewaters. Second, several experimental and computational runs were carried out under unsteady-state operation to evaluate the dynamic performance addressing the TOC concentration and temperature profiles. CFD computations of total organic carbon conversion were found to agree better with experimental data at lower temperatures. Finally, the comparison of test data with simulation results demonstrated that this integrated framework was able to describe the mineralization of organic matter in trickle beds and the validated consequence model can be exploited to promote cleaner remediation technologies of contaminated waters. Copyright © 2011 Elsevier B.V. All rights reserved.

  17. Numerical methodologies for investigation of moderate-velocity flow using a hybrid computational fluid dynamics - molecular dynamics simulation approach

    International Nuclear Information System (INIS)

    Ko, Soon Heum; Kim, Na Yong; Nikitopoulos, Dimitris E.; Moldovan, Dorel; Jha, Shantenu

    2014-01-01

    Numerical approaches are presented to minimize the statistical errors inherently present due to finite sampling and the presence of thermal fluctuations in the molecular region of a hybrid computational fluid dynamics (CFD) - molecular dynamics (MD) flow solution. Near the fluid-solid interface the hybrid CFD-MD simulation approach provides a more accurate solution, especially in the presence of significant molecular-level phenomena, than the traditional continuum-based simulation techniques. It also involves less computational cost than the pure particle-based MD. Despite these advantages the hybrid CFD-MD methodology has been applied mostly in flow studies at high velocities, mainly because of the higher statistical errors associated with low velocities. As an alternative to the costly increase of the size of the MD region to decrease statistical errors, we investigate a few numerical approaches that reduce sampling noise of the solution at moderate-velocities. These methods are based on sampling of multiple simulation replicas and linear regression of multiple spatial/temporal samples. We discuss the advantages and disadvantages of each technique in the perspective of solution accuracy and computational cost.

  18. An investigation of laser cutting quality of 22MnB5 ultra high strength steel using response surface methodology

    Science.gov (United States)

    Tahir, Abdul Fattah Mohd; Aqida, Syarifah Nur

    2017-07-01

    In hot press forming, changes of mechanical properties in boron steel blanks have been a setback in trimming the final shape components. This paper presents investigation of kerf width and heat affected zone (HAZ) of ultra high strength 22MnB5 steel cutting. Sample cutting was conducted using a 4 kW Carbon Dioxide (CO2) laser machine with 10.6 μm wavelength with the laser spot size of 0.2 mm. A response surface methodology (RSM) using three level Box-Behnken design of experiment was developed with three factors of peak power, cutting speed and duty cycle. The parameters were optimised for minimum kerf width and HAZ formation. Optical evaluation using MITUTOYO TM 505 were conducted to measure the kerf width and HAZ region. From the findings, laser duty cycle was crucial to determine cutting quality of ultra-high strength steel; followed by cutting speed and laser power. Meanwhile, low power intensity with continuous wave contributes the narrowest kerf width formation and least HAZ region.

  19. Using hydrofluoric acid for morphological investigations of Zoanthids (Cnidaria: Anthozoa): a critical assessment of methodology and necessity.

    Science.gov (United States)

    Reimer, James Davis; Nakachi, Shu; Hirose, Mamiko; Hirose, Euichi; Hashiguchi, Shinji

    2010-10-01

    Zoanthids comprise an order of benthic, generally colonial cnidarians, which can usually be distinguished from other hexacorallians by embedded sand and detritus in their mesoglea to help strengthen their structure. These animals are becoming increasingly important research subjects in biochemistry and other research fields. Their inclusion of both calcium and silica results in the need for both decalcification and desilification for internal morphological examinations. Since the methodology of hydrofluoric acid (HF) desilification has rarely been documented in zoanthids, histological surveys for zoanthid taxonomy have often been abandoned and their taxonomy is often problematic. Recent investigations utilizing molecular methods have brought a clearer understanding of zoanthid diversity, but standardization of HF treatments are still needed to provide a link between molecular and more traditional techniques, and to properly examine specimens for which molecular methods may not be an option (e.g., formalin-preserved specimens, etc.). Here, we use both "straight" HF and, for the first time with zoanthids, buffered HF (BHF) treatments at different treatment lengths (1-48 h) on polyps from three different species of zoanthids for histological examination. Section conditions were judged based on the presence/absence of embedded detritus, drag marks, and tissue condition. Results show that the BHF treatment resulted in slightly better tissue conditions for all specimens, and suggest that desilification works well regardless of treatment time for species with smaller (polyp diameter zoanthid specimens.

  20. Investigating effects of BCC and FCC arrangements on flow and heat transfer characteristics in pebbles through CFD methodology

    Energy Technology Data Exchange (ETDEWEB)

    Ferng, Yuh Ming, E-mail: ymferng@ess.nthu.edu.tw [Department of Engineering and System Science, Institute of Nuclear Engineering and Science, National Tsing Hua University, 101, Sec. 2. Kuang-Fu Rd., Hsingchu 30013, Taiwan, ROC (China); Lin, Kun-Yueh [Department of Engineering and System Science, Institute of Nuclear Engineering and Science, National Tsing Hua University, 101, Sec. 2. Kuang-Fu Rd., Hsingchu 30013, Taiwan, ROC (China)

    2013-05-15

    Highlights: ► An HTGR would be one of the possible energy generation sources. ► We propose a CFD model to study effects of pebble arrangements for a PRB core. ► The entrance effect on the Nu number can be reasonably captured. ► The present predicted Nu versus Re{sub p} shows good agreement with data and correlation. ► Using FCC lattice in a core, simulation results may be non-conservative. -- Abstract: A high temperature gas cooled reactor (HTGR) would be one of the possible energy generation sources due to its advantages of inherently safety performance and higher conversion efficiency, etc. However, safety is the most important issue for its commercialization in energy industry. It is very crucial for safety design and operation of an HTGR to investigate its thermal–hydraulic characteristics. In this article, a computational fluid dynamics (CFD) methodology is proposed to investigate effects of different arrangements on these characteristics for an HTGR with a pebble bed (PB) core. Two kinds of arrangement: body-centered cubic (BCC) and face-centered cubic (FCC) are studies herein. Based on the simulation results, higher heat transfer capability and lower pebble temperature are predicted in the pebbles with the FCC-arrangement. The thermally fully-developed flow condition may be reached, which is shown in the result that the predicted average Nussel (Nu) number decreases from the 1st layer and reaches to an asymptotic value as the gas passes through the 6th layer of pebbles. This entrance effect reveals that the system codes using the correlations developed from the fully-developed flow condition can be appropriately applied in the entire PBR core. In addition, the present predicted dependence of Nu number on the inlet Reynolds (Re) number shows good agreement with that obtained from the well-known KTA. Measured data of Nu number versus Re number are also used to validate the CFD model.

  1. Human error risk management for engineering systems: a methodology for design, safety assessment, accident investigation and training

    International Nuclear Information System (INIS)

    Cacciabue, P.C.

    2004-01-01

    The objective of this paper is to tackle methodological issues associated with the inclusion of cognitive and dynamic considerations into Human Reliability methods. A methodology called Human Error Risk Management for Engineering Systems is presented that offers a 'roadmap' for selecting and consistently applying Human Factors approaches in different areas of application and contains also a 'body' of possible methods and techniques of its own. Two types of possible application are discussed to demonstrate practical applications of the methodology. Specific attention is dedicated to the issue of data collection and definition from specific field assessment

  2. Convective heat transfer enhancement by diamond shaped micro-protruded patterns for heat sinks: Thermal fluid dynamic investigation and novel optimization methodology

    International Nuclear Information System (INIS)

    Ventola, Luigi; Dialameh, Masoud; Fasano, Matteo; Chiavazzo, Eliodoro; Asinari, Pietro

    2016-01-01

    Highlights: • A novel methodology for optimal design of patterned heat sink surfaces is proposed. • Heat transfer enhancement by patterned surfaces is measured experimentally. • Role of fluid dynamics and geometrical scales on heat transfer is clarified. - Abstract: In the present work, micro-protruded patterns on flush mounted heat sinks for convective heat transfer enhancement are investigated and a novel methodology for thermal optimization is proposed. Patterned heat sinks are experimentally characterized in fully turbulent regime, and the role played by geometrical parameters and fluid dynamic scales is discussed. A methodology specifically suited for micro-protruded pattern optimization is designed, leading to 73% enhancement in thermal performance respect to commercially available heat sinks, at fixed costs. This work is expected to introduce a new methodological approach for a more systematic and efficient development of solutions for electronics cooling.

  3. Investigating the effect of Alcohol Brief Interventions within accident and emergency departments using a data informatics methodology.

    Science.gov (United States)

    Baldacchino, Alex; O'Rourke, Louise; Humphris, Gerry

    2018-07-01

    Alcohol Brief Interventions (ABI) have been implemented throughout Scotland since 2008 and aim to reduce hazardous drinking through a Scottish Government funded initiative delivered in a range of settings, including Accident and Emergency (A and E) departments. To study the extent to which Alcohol Brief Interventions (ABI) are associated with later health service use. An opportunistic informatics approach was applied. A unique patient identifier was used to link patient data with core datasets spanning two years previous and two years post ABI. Variables included inpatient attendance, outpatient attendance, psychiatric admissions, and A and E attendance and prescribing. Patients (N = 1704) who presented at A and E departments who reported an average alcohol consumption of more than 8 units daily received the ABI. Fast Alcohol Screening Test (FAST) was used to assess patients for hazardous alcohol consumption. Multilevel linear modelling was employed to predict post-intervention utilisation using pre-ABI variables and controlling for person characteristics and venue. Significant decrease in A and E usage was found at one and two years following the ABI intervention. Previous health service use was predictive of later service use. A single question (Item 4) on the FAST was predictive of A and E attendance at one and two years. This investigation and methodology used provide support for the delivery of the ABI. However, it cannot be ascertained whether this is due to the ABI or simply is a result of making contact with a specialist in the addiction field. Copyright © 2018 Elsevier B.V. All rights reserved.

  4. A feasibility investigation for modeling and optimization of temperature in bone drilling using fuzzy logic and Taguchi optimization methodology.

    Science.gov (United States)

    Pandey, Rupesh Kumar; Panda, Sudhansu Sekhar

    2014-11-01

    Drilling of bone is a common procedure in orthopedic surgery to produce hole for screw insertion to fixate the fracture devices and implants. The increase in temperature during such a procedure increases the chances of thermal invasion of bone which can cause thermal osteonecrosis resulting in the increase of healing time or reduction in the stability and strength of the fixation. Therefore, drilling of bone with minimum temperature is a major challenge for orthopedic fracture treatment. This investigation discusses the use of fuzzy logic and Taguchi methodology for predicting and minimizing the temperature produced during bone drilling. The drilling experiments have been conducted on bovine bone using Taguchi's L25 experimental design. A fuzzy model is developed for predicting the temperature during orthopedic drilling as a function of the drilling process parameters (point angle, helix angle, feed rate and cutting speed). Optimum bone drilling process parameters for minimizing the temperature are determined using Taguchi method. The effect of individual cutting parameters on the temperature produced is evaluated using analysis of variance. The fuzzy model using triangular and trapezoidal membership predicts the temperature within a maximum error of ±7%. Taguchi analysis of the obtained results determined the optimal drilling conditions for minimizing the temperature as A3B5C1.The developed system will simplify the tedious task of modeling and determination of the optimal process parameters to minimize the bone drilling temperature. It will reduce the risk of thermal osteonecrosis and can be very effective for the online condition monitoring of the process. © IMechE 2014.

  5. Investigation on the Effects of Process Parameters on Laser Percussion Drilling Using Finite Element Methodology; Statistical Modelling and Optimization

    Directory of Open Access Journals (Sweden)

    Mahmoud Moradi

    Full Text Available Abstract In the present research, the simulation of the Nickel-base superalloy Inconel 718 fiber-laser drilling process with the thickness of 1mm is investigated through the Finite Element Method. In order to specify the appropriate Gaussian distribution of laser beam, the results of an experimental research on glass laser drilling were simulated using three types of Gaussian distribution. The DFLUX subroutine was used to implement the laser heat sources of the models using the Fortran language. After the appropriate Gaussian distribution was chosen, the model was validated with the experimental results of the Nickel-base superalloy Inconel 718 laser drilling process. The negligible error percentage among the experimental and simulation results demonstrates the high accuracy of this model. The experiments were performed based on the Response Surface Methodology (RSM as a statistical design of experiment (DOE approach to investigate the influence of process parameters on the responses, obtaining the mathematical regressions and predicting the new results. Four parameters i.e. laser pulse frequency (150 to 550 Hz, laser power (200 to 500 watts, laser focal plane position (-0.5 to +0.5 mm and the duty cycle (30 to 70% were considered to be the input variables in 5 levels and four external parameters i.e. the hole's entrance and exit diameters, hole taper angle and the weight of mass removed from the hole, were observed to be the process output responses of this central composite design. By performing the statistical analysis, the input and output parameters were found to have a direct relation with each other. By an increase in each of the input variables, the entrance and exit hole diameters, the hole taper angel, and the weight of mass removed from the hole increase. Finally, the results of the conducted simulations and statistical analyses having been used, the laser drilling process was optimized by means of the desire ability approach. Good

  6. Copper and tin isotopic analysis of ancient bronzes for archaeological investigation: development and validation of a suitable analytical methodology.

    Science.gov (United States)

    Balliana, Eleonora; Aramendía, Maite; Resano, Martin; Barbante, Carlo; Vanhaecke, Frank

    2013-03-01

    Although in many cases Pb isotopic analysis can be relied on for provenance determination of ancient bronzes, sometimes the use of "non-traditional" isotopic systems, such as those of Cu and Sn, is required. The work reported on in this paper aimed at revising the methodology for Cu and Sn isotope ratio measurements in archaeological bronzes via optimization of the analytical procedures in terms of sample pre-treatment, measurement protocol, precision, and analytical uncertainty. For Cu isotopic analysis, both Zn and Ni were investigated for their merit as internal standard (IS) relied on for mass bias correction. The use of Ni as IS seems to be the most robust approach as Ni is less prone to contamination, has a lower abundance in bronzes and an ionization potential similar to that of Cu, and provides slightly better reproducibility values when applied to NIST SRM 976 Cu isotopic reference material. The possibility of carrying out direct isotopic analysis without prior Cu isolation (with AG-MP-1 anion exchange resin) was investigated by analysis of CRM IARM 91D bronze reference material, synthetic solutions, and archaeological bronzes. Both procedures (Cu isolation/no Cu isolation) provide similar δ (65)Cu results with similar uncertainty budgets in all cases (±0.02-0.04 per mil in delta units, k = 2, n = 4). Direct isotopic analysis of Cu therefore seems feasible, without evidence of spectral interference or matrix-induced effect on the extent of mass bias. For Sn, a separation protocol relying on TRU-Spec anion exchange resin was optimized, providing a recovery close to 100 % without on-column fractionation. Cu was recovered quantitatively together with the bronze matrix with this isolation protocol. Isotopic analysis of this Cu fraction provides δ (65)Cu results similar to those obtained upon isolation using AG-MP-1 resin. This means that Cu and Sn isotopic analysis of bronze alloys can therefore be carried out after a single chromatographic

  7. Analysis methodology for RBMK-1500 core safety and investigations on corium coolability during a LWR severe accident

    International Nuclear Information System (INIS)

    Jasiulevicius, Audrius

    2003-01-01

    This thesis presents the work involving two broad aspects within the field of nuclear reactor analysis and safety. These are: - development of a fully independent reactor dynamics and safety analysis methodology of the RBMK-1500 core transient accidents and - experiments on the enhancement of coolability of a particulate bed or a melt pool due to heat removal through the control rod guide tubes. The first part of the thesis focuses on the development of the RBMK-1500 analysis methodology based on the CORETRAN code package. The second part investigates the issue of coolability during severe accidents in LWR type reactors: the coolability of debris bed and melt pool for in-vessel and ex-vessel conditions. The first chapter briefly presents the status of developments in both the RBMK-1500 core analysis and the corium coolability areas. The second chapter describes the generation of the RBMK-1500 neutron cross section data library with the HELIOS code. The cross section library was developed for the whole range of the reactor conditions. The results of the benchmarking with the WIMS-D4 code and validation against the RBMK Critical Facility experiments is also presented here. The HELIOS generated neutron cross section data library provides a close agreement with the WIMS-D4 code results. The validation against the data from the Critical Experiments shows that the HELIOS generated neutron cross section library provides excellent predictions for the criticality, axial and radial power distribution, control rod reactivity worths and coolant reactivity effects, etc. The reactivity effects of voiding for the system, fuel assembly and additional absorber channel are underpredicted in the calculations using the HELIOS code generated neutron cross sections. The underprediction, however, is much less than that obtained when the WIMS-D4 code generated cross sections are employed. The third chapter describes the work, performed towards the accurate prediction, assessment and

  8. Investigation of optimal seismic design methodology for piping systems supported by elasto-plastic dampers. Part 1. Evaluation functions

    International Nuclear Information System (INIS)

    Ito, Tomohiro; Michiue, Masashi; Fujita, Katsuhisa

    2009-01-01

    In this study, the optimal seismic design methodology that can consider the structural integrity of not only the piping systems but also elasto-plastic supporting devices is developed. This methodology employs a genetic algorithm and can search the optimal conditions such as the supporting location, capacity and stiffness of the supporting devices. Here, a lead extrusion damper is treated as a typical elasto-plastic damper. Four types of evaluation functions are considered. It is found that the proposed optimal seismic design methodology is very effective and can be applied to the actual seismic design for piping systems supported by elasto-plastic dampers. The effectiveness of the evaluation functions is also clarified. (author)

  9. Investigating Historic Parcel Changes to Understand Land Use Trends: A Methodology and Application for the San Pedro River Watershed

    Science.gov (United States)

    Long-term land use and land cover change, and the associated impacts, pose critical challenges to sustaining healthy communities and ecosystems. In this study, a methodology was developed to use parcel data to evaluate land use trends in southeast Arizona’s San Pedro River Water...

  10. Analysis methodology for RBMK-1500 core safety and investigations on corium coolability during a LWR severe accident

    Energy Technology Data Exchange (ETDEWEB)

    Jasiulevicius, Audrius

    2003-07-01

    This thesis presents the work involving two broad aspects within the field of nuclear reactor analysis and safety. These are: - development of a fully independent reactor dynamics and safety analysis methodology of the RBMK-1500 core transient accidents and - experiments on the enhancement of coolability of a particulate bed or a melt pool due to heat removal through the control rod guide tubes. The first part of the thesis focuses on the development of the RBMK-1500 analysis methodology based on the CORETRAN code package. The second part investigates the issue of coolability during severe accidents in LWR type reactors: the coolability of debris bed and melt pool for in-vessel and ex-vessel conditions. The first chapter briefly presents the status of developments in both the RBMK-1500 core analysis and the corium coolability areas. The second chapter describes the generation of the RBMK-1500 neutron cross section data library with the HELIOS code. The cross section library was developed for the whole range of the reactor conditions. The results of the benchmarking with the WIMS-D4 code and validation against the RBMK Critical Facility experiments is also presented here. The HELIOS generated neutron cross section data library provides a close agreement with the WIMS-D4 code results. The validation against the data from the Critical Experiments shows that the HELIOS generated neutron cross section library provides excellent predictions for the criticality, axial and radial power distribution, control rod reactivity worths and coolant reactivity effects, etc. The reactivity effects of voiding for the system, fuel assembly and additional absorber channel are underpredicted in the calculations using the HELIOS code generated neutron cross sections. The underprediction, however, is much less than that obtained when the WIMS-D4 code generated cross sections are employed. The third chapter describes the work, performed towards the accurate prediction, assessment and

  11. Sources of particulate matter components in the Athabasca oil sands region: investigation through a comparison of trace element measurement methodologies

    Science.gov (United States)

    Phillips-Smith, Catherine; Jeong, Cheol-Heon; Healy, Robert M.; Dabek-Zlotorzynska, Ewa; Celo, Valbona; Brook, Jeffrey R.; Evans, Greg

    2017-08-01

    The province of Alberta, Canada, is home to three oil sands regions which, combined, contain the third largest deposit of oil in the world. Of these, the Athabasca oil sands region is the largest. As part of Environment and Climate Change Canada's program in support of the Joint Canada-Alberta Implementation Plan for Oil Sands Monitoring program, concentrations of trace elements in PM2. 5 (particulate matter smaller than 2.5 µm in diameter) were measured through two campaigns that involved different methodologies: a long-term filter campaign and a short-term intensive campaign. In the long-term campaign, 24 h filter samples were collected once every 6 days over a 2-year period (December 2010-November 2012) at three air monitoring stations in the regional municipality of Wood Buffalo. For the intensive campaign (August 2013), hourly measurements were made with an online instrument at one air monitoring station; daily filter samples were also collected. The hourly and 24 h filter data were analyzed individually using positive matrix factorization. Seven emission sources of PM2. 5 trace elements were thereby identified: two types of upgrader emissions, soil, haul road dust, biomass burning, and two sources of mixed origin. The upgrader emissions, soil, and haul road dust sources were identified through both the methodologies and both methodologies identified a mixed source, but these exhibited more differences than similarities. The second upgrader emissions and biomass burning sources were only resolved by the hourly and filter methodologies, respectively. The similarity of the receptor modeling results from the two methodologies provided reassurance as to the identity of the sources. Overall, much of the PM2. 5-related trace elements were found to be anthropogenic, or at least to be aerosolized through anthropogenic activities. These emissions may in part explain the previously reported higher levels of trace elements in snow, water, and biota samples collected

  12. ICP-MS/MS-Based Ionomics: A Validated Methodology to Investigate the Biological Variability of the Human Ionome.

    Science.gov (United States)

    Konz, Tobias; Migliavacca, Eugenia; Dayon, Loïc; Bowman, Gene; Oikonomidi, Aikaterini; Popp, Julius; Rezzi, Serge

    2017-05-05

    We here describe the development, validation and application of a quantitative methodology for the simultaneous determination of 29 elements in human serum using state-of-the-art inductively coupled plasma triple quadrupole mass spectrometry (ICP-MS/MS). This new methodology offers high-throughput elemental profiling using simple dilution of minimal quantity of serum samples. We report the outcomes of the validation procedure including limits of detection/quantification, linearity of calibration curves, precision, recovery and measurement uncertainty. ICP-MS/MS-based ionomics was used to analyze human serum of 120 older adults. Following a metabolomic data mining approach, the generated ionome profiles were subjected to principal component analysis revealing gender and age-specific differences. The ionome of female individuals was marked by higher levels of calcium, phosphorus, copper and copper to zinc ratio, while iron concentration was lower with respect to male subjects. Age was associated with lower concentrations of zinc. These findings were complemented with additional readouts to interpret micronutrient status including ceruloplasmin, ferritin and inorganic phosphate. Our data supports a gender-specific compartmentalization of the ionome that may reflect different bone remodelling in female individuals. Our ICP-MS/MS methodology enriches the panel of validated "Omics" approaches to study molecular relationships between the exposome and the ionome in relation with nutrition and health.

  13. Sources of particulate matter components in the Athabasca oil sands region: investigation through a comparison of trace element measurement methodologies

    Directory of Open Access Journals (Sweden)

    C. Phillips-Smith

    2017-08-01

    Full Text Available The province of Alberta, Canada, is home to three oil sands regions which, combined, contain the third largest deposit of oil in the world. Of these, the Athabasca oil sands region is the largest. As part of Environment and Climate Change Canada's program in support of the Joint Canada-Alberta Implementation Plan for Oil Sands Monitoring program, concentrations of trace elements in PM2. 5 (particulate matter smaller than 2.5 µm in diameter were measured through two campaigns that involved different methodologies: a long-term filter campaign and a short-term intensive campaign. In the long-term campaign, 24 h filter samples were collected once every 6 days over a 2-year period (December 2010–November 2012 at three air monitoring stations in the regional municipality of Wood Buffalo. For the intensive campaign (August 2013, hourly measurements were made with an online instrument at one air monitoring station; daily filter samples were also collected. The hourly and 24 h filter data were analyzed individually using positive matrix factorization. Seven emission sources of PM2. 5 trace elements were thereby identified: two types of upgrader emissions, soil, haul road dust, biomass burning, and two sources of mixed origin. The upgrader emissions, soil, and haul road dust sources were identified through both the methodologies and both methodologies identified a mixed source, but these exhibited more differences than similarities. The second upgrader emissions and biomass burning sources were only resolved by the hourly and filter methodologies, respectively. The similarity of the receptor modeling results from the two methodologies provided reassurance as to the identity of the sources. Overall, much of the PM2. 5-related trace elements were found to be anthropogenic, or at least to be aerosolized through anthropogenic activities. These emissions may in part explain the previously reported higher levels of trace elements in snow

  14. Nutrients interaction investigation to improve Monascus purpureus FTC5391 growth rate using Response Surface Methodology and Artificial Neural Network

    Directory of Open Access Journals (Sweden)

    Mohamad, R.

    2013-01-01

    Full Text Available Aims: Two vital factors, certain environmental conditions and nutrients as a source of energy are entailed for successful growth and reproduction of microorganisms. Manipulation of nutritional requirement is the simplest and most effectual strategy to stimulate and enhance the activity of microorganisms. Methodology and Results: In this study, response surface methodology (RSM and artificial neural network (ANN were employed to optimize the carbon and nitrogen sources in order to improve growth rate of Monascus purpureus FTC5391,a new local isolate. The best models for optimization of growth rate were a multilayer full feed-forward incremental back propagation network, and a modified response surface model using backward elimination. The optimum condition for cell mass production was: sucrose 2.5%, yeast extract 0.045%, casamino acid 0.275%, sodium nitrate 0.48%, potato starch 0.045%, dextrose 1%, potassium nitrate 0.57%. The experimental cell mass production using this optimal condition was 21 mg/plate/12days, which was 2.2-fold higher than the standard condition (sucrose 5%, yeast extract 0.15%, casamino acid 0.25%, sodium nitrate 0.3%, potato starch 0.2%, dextrose 1%, potassium nitrate 0.3%. Conclusion, significance and impact of study: The results of RSM and ANN showed that all carbon and nitrogen sources tested had significant effect on growth rate (P-value < 0.05. In addition the use of RSM and ANN alongside each other provided a proper growth prediction model.

  15. Games and Diabetes: A Review Investigating Theoretical Frameworks, Evaluation Methodologies, and Opportunities for Design Grounded in Learning Theories.

    Science.gov (United States)

    Lazem, Shaimaa; Webster, Mary; Holmes, Wayne; Wolf, Motje

    2015-09-02

    Here we review 18 articles that describe the design and evaluation of 1 or more games for diabetes from technical, methodological, and theoretical perspectives. We undertook searches covering the period 2010 to May 2015 in the ACM, IEEE, Journal of Medical Internet Research, Studies in Health Technology and Informatics, and Google Scholar online databases using the keywords "children," "computer games," "diabetes," "games," "type 1," and "type 2" in various Boolean combinations. The review sets out to establish, for future research, an understanding of the current landscape of digital games designed for children with diabetes. We briefly explored the use and impact of well-established learning theories in such games. The most frequently mentioned theoretical frameworks were social cognitive theory and social constructivism. Due to the limitations of the reported evaluation methodologies, little evidence was found to support the strong promise of games for diabetes. Furthermore, we could not establish a relation between design features and the game outcomes. We argue that an in-depth discussion about the extent to which learning theories could and should be manifested in the design decisions is required. © 2015 Diabetes Technology Society.

  16. Assessing climate risks across different business sectors and industries: an investigation of methodological challenges at national scale for the UK

    Science.gov (United States)

    Surminski, Swenja; Di Mauro, Manuela; Baglee, J. Alastair R.; Connell, Richenda K.; Hankinson, Joel; Haworth, Anna R.; Ingirige, Bingunath; Proverbs, David

    2018-06-01

    Climate change poses severe risks for businesses, which companies as well as governments need to understand in order to take appropriate steps to manage those. This, however, represents a significant challenge as climate change risk assessment is itself a complex, dynamic and geographically diverse process. A wide range of factors including the nature of production processes and value chains, the location of business sites as well as relationships and interdependencies with customers and suppliers play a role in determining if and how companies are impacted by climate risks. This research explores the methodological challenges for a national-scale assessment of climate risks through the lens of the UK Climate Change Risk Assessment (UKCCRA) process and compares the approaches adopted in the first and second UKCCRA (2011, 2016), while also reflecting on international experiences elsewhere. A review of these issues is presented, drawing on a wide body of contemporary evidence from a range of sources including the research disciplines, grey literature and government policy. The study reveals the methodological challenges and highlights six broad themes, namely scale, evidence base, adaptation responses, scope, interdependencies and public policy. The paper concludes by identifying suitable lessons for future national climate risk assessments, which should guide the next phase of research in preparation for UKCCRA3 and those of national-level risk assessments elsewhere. This article is part of the theme issue `Advances in risk assessment for climate change adaptation policy'.

  17. Credit Surety Fund: A credit innovation for micro, small, and medium-sized enterprises in the Philippines

    OpenAIRE

    Maningo, Gary V.

    2016-01-01

    Micro, small, and medium-sized enterprises are a backbone of the Philippine economy. One factor that hinders the growth of these enterprises is their difficulty in accessing finance from banks and other financial institutions. The Credit Surety Fund (CSF) was established to help these enterprises and other organizations become creditworthy and bankable. The CSF is a credit guarantee program initiated by the Bangko Sentral ng Pilipinas that enables enterprises and cooperatives to gain easier a...

  18. Integrated procedures and monitoring methodologies for thermographic investigations of architectural heritage: two applicative cases in Sicily, Italy

    International Nuclear Information System (INIS)

    Bianco, A.

    2013-01-01

    The paper explains some opportunities and limitations of thermographic investigations in terms of their capability to define the conservative conditions of architectural heritage and in terms of the historical recollection for a technical diagnosis. Different approaches are demonstrated in two case studies: the first integrates thermography with other investigative methods; the second combines thermographic monitoring with hygrothermal monitoring. (author)

  19. Investigating 3S Synergies to Support Infrastructure Development and Risk-Informed Methodologies for 3S by Design

    International Nuclear Information System (INIS)

    Suzuki, M.; Izumi, Y.; Kimoto, T.; Naoi, Y.; Inoue, T.; Hoffheins, B.

    2010-01-01

    In 2008, Japan and other G8 countries pledged to support the Safeguards, Safety, and Security (3S) Initiative to raise awareness of 3S worldwide and to assist countries in setting up nuclear energy infrastructures that are essential cornerstones of a successful nuclear energy program. The goals of the 3S initiative are to ensure that countries already using nuclear energy or those planning to use nuclear energy are supported by strong national programs in safety, security, and safeguards not only for reliability and viability of the programs, but also to prove to the international audience that the programs are purely peaceful and that nuclear material is properly handled, accounted for, and protected. In support of this initiative, Japan Atomic Energy Agency (JAEA) has been conducting detailed analyses of the R and D programs and cultures of each of the 'S' areas to identify overlaps where synergism and efficiencies might be realized, to determine where there are gaps in the development of a mature 3S culture, and to coordinate efforts with other Japanese and international organizations. As an initial outcome of this study, incoming JAEA employees are being introduced to 3S as part of their induction training and the idea of a President's Award program is being evaluated. Furthermore, some overlaps in 3S missions might be exploited to share facility instrumentation as with Joint-Use-Equipment (JUE), in which cameras and radiation detectors, are shared by the State and IAEA. Lessons learned in these activities can be applied to developing more efficient and effective 3S infrastructures for incorporating into Safeguards by Design methodologies. They will also be useful in supporting human resources and technology development projects associated with Japan's planned nuclear security center for Asia, which was announced during the 2010 Nuclear Security Summit. In this presentation, a risk-informed approach regarding integration of 3S will be introduced. An initial

  20. Simultaneous effect of dissolved organic carbon, surfactant, and organic acid on the desorption of pesticides investigated by response surface methodology

    DEFF Research Database (Denmark)

    Trinh, Ha Thu; Duong, Hanh Thi; Ta, Thao Thi

    2017-01-01

    Desorption of pesticides (fenobucarb, endosulfan, and dichlorodiphenyltrichloroethane (DDT)) from soil to aqueous solution with the simultaneous presence of dissolved organic carbon (DOC), sodium dodecyl sulfate (SDS), and sodium oxalate (Oxa) was investigated in batch test by applying a full...

  1. Care for a break? An investigation of informal caregivers' attitudes toward respite care using Q-methodology

    NARCIS (Netherlands)

    Exel, J.; de Graaf, G.; Brouwer, W.

    2007-01-01

    Objective: To investigate informal caregivers' attitudes toward respite care. Method: Interviews with informal caregivers during open-house support groups (three) for informal caregivers, conducted late 2004 at Informal Care Support Centres in the city of Rotterdam, The Netherlands. A

  2. Investigation of equilibrium and kinetics of Cr(VI) adsorption by dried Bacillus cereus using response surface methodology.

    Science.gov (United States)

    Yang, Kai; Zhang, Jing; Yang, Tao; Wang, Hongyu

    2016-01-01

    In this study, response surface methodology (RSM) based on three-variable-five-level central composite rotatable design was used to analyze the effects of combined and individual operating parameters (biomass dose, initial concentration of Cr(VI) and pH) on the Cr(VI) adsorption capacity of dried Bacillus cereus. A quadratic polynomial equation was obtained to predict the adsorbed Cr(VI) amount. Analysis of variance showed that the effect of biomass dose was the key factor in the removal of Cr(VI). The maximum adsorbed Cr(VI) amount (30.93 mg g(-1)) was found at 165.30 mg L(-1), 2.96, and 3.01 g L(-1) for initial Cr(VI) concentration, pH, and biosorbent dosage, respectively. The surface chemical functional groups and microstructure of unloaded and Cr(VI)-loaded dried Bacillus cereus were identified by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM), respectively. Besides, the results gained from these studies indicated that Langmuir isotherm and the second-order rate expression were suitable for the removal of Cr(VI) from wastewater. The results revealed RSM was an effective method for optimizing biosorption process, and dried Bacillus cereus had a remarkable performance on the removal of Cr(VI) from wastewater.

  3. Research review: Functional brain connectivity and child psychopathology--overview and methodological considerations for investigators new to the field.

    Science.gov (United States)

    Matthews, Marguerite; Fair, Damien A

    2015-04-01

    Functional connectivity MRI is an emerging technique that can be used to investigate typical and atypical brain function in developing and aging populations. Despite some of the current confounds in the field of functional connectivity MRI, the translational potential of the technique available to investigators may eventually be used to improve diagnosis, early disease detection, and therapy monitoring. Based on a comprehensive survey of the literature, this review offers an introduction of resting-state functional connectivity for new investigators to the field of resting-state functional connectivity. We discuss a brief history of the technique, various methods of analysis, the relationship of functional networks to behavior, as well as the translational potential of functional connectivity MRI to investigate neuropsychiatric disorders. We also address some considerations and limitations with data analysis and interpretation. The information provided in this review should serve as a foundation for investigators new to the field of resting-state functional connectivity. The discussion provides a means to better understand functional connectivity and its application to typical and atypical brain function. © 2014 Association for Child and Adolescent Mental Health.

  4. Short-term pressure induced suppression of the short-latency response: a new methodology for investigating stretch reflexes

    DEFF Research Database (Denmark)

    Leukel, Christian; Lundbye-Jensen, Jesper; Gruber, Markus

    2009-01-01

    During experiments involving ischemic nerve block, we noticed that the short-latency response (SLR) of evoked stretches in m. soleus decreased immediately following inflation of a pneumatic cuff surrounding the lower leg. The present study aimed to investigate this short-term effect of pressure......) were recorded. Additionally, stretches were applied with different velocities and amplitudes. Finally, the SLR was investigated during hopping and in two protocols that modified the ability of the muscle-tendon complex distal to the cuff to stretch. All measurements were performed with deflated...

  5. Investigating the Place and Meaning of "Physical Education" to Preschool Children: Methodological Lessons from a Research Study

    Science.gov (United States)

    McEvilly, Nollaig

    2015-01-01

    Preschool physical education has not been extensively researched. Furthermore, research in physical activity and physical education rarely seeks young children's perspectives. The current paper focuses on one aspect of a post-structural study concerned with investigating the place and meaning of "physical education" to practitioners and…

  6. Development of a quality management system for borehole investigations. (1) Quality assurance and quality control methodology for hydraulic packer testing

    International Nuclear Information System (INIS)

    Takeuchi, Shinji; Kunimaru, Takanori; Ota, Kunio; Frieg, Bernd

    2011-01-01

    A quality assurance and quality control (QA/QC) system for the hydraulic packer tests has been established based on the surface-based investigations at JAEA's underground research laboratories in Mizunami and Horonobe. The established QA/QC system covers field investigations (data acquisition) and data analysis. For the field investigations, the adopted procedure is selection of a test section based on a detail fluid logging and checking with tally list, followed by inspection of test tools such as pressure transducers and shut-in valves, etc., test method selection using a 'sequential hydraulic test' for deciding appropriate method, and finally data quality confirmation by pressure changes and derivatives on a log-log plots during testing. Test event logs should also be described during testing for traceability. For the test data analysis, a quick analysis for rough estimation of hydraulic parameters, and a detailed analysis using type curve and/or numerical analyses are conducted stepwise. The established QA/QC system has been applied to the recent borehole investigations and its efficiency has been confirmed. (author)

  7. Investigation of biomass concentration, lipid production, and cellulose content in Chlorella vulgaris cultures using response surface methodology.

    Science.gov (United States)

    Aguirre, Ana-Maria; Bassi, Amarjeet

    2013-08-01

    The microalgae Chlorella vulgaris produce lipids that after extraction from cells can be converted into biodiesel. However, these lipids cannot be efficiently extracted from cells due to the presence of the microalgae cell wall, which acts as a barrier for lipid removal when traditional extraction methods are employed. Therefore, a microalgae system with high lipid productivity and thinner cell walls could be more suitable for lipid production from microalgae. This study addresses the effect of culture conditions, specifically carbon dioxide and sodium nitrate concentrations, on biomass concentration and the ratio of lipid productivity/cellulose content. Optimization of culture conditions was done by response surface methodology. The empirical model for biomass concentration (R(2)  = 96.0%) led to a predicted maximum of 1123.2 mg dw L(-1) when carbon dioxide and sodium nitrate concentrations were 2.33% (v/v) and 5.77 mM, respectively. For lipid productivity/cellulose content ratio (R(2)  = 95.2%) the maximum predicted value was 0.46 (mg lipid L(-1)  day(-1) )(mg cellulose mg biomass(-1) )(-1) when carbon dioxide concentration was 4.02% (v/v) and sodium nitrate concentration was 3.21 mM. A common optimum point for both variables (biomass concentration and lipid productivity/cellulose content ratio) was also found, predicting a biomass concentration of 1119.7 mg dw L(-1) and lipid productivity/cellulose content ratio of 0.44 (mg lipid L(-1)  day(-1) )(mg cellulose mg biomass(-1) )(-1) for culture conditions of 3.77% (v/v) carbon dioxide and 4.01 mM sodium nitrate. The models were experimentally validated and results supported their accuracy. This study shows that it is possible to improve lipid productivity/cellulose content by manipulation of culture conditions, which may be applicable to any scale of bioreactors. Copyright © 2013 Wiley Periodicals, Inc.

  8. Investigation of methodological factors potentially underlying the apparently paradoxical findings on body mass index and all-cause mortality.

    Directory of Open Access Journals (Sweden)

    Grace Joshy

    Full Text Available INTRODUCTION: Findings regarding the association between overweight and all-cause mortality range from significantly lower to higher risk, compared with body-mass-index (BMI within the "normal" range. METHODS: We examined empirically potential methodological explanations for these apparently conflicting results using questionnaire and linked mortality data from 246,314 individuals aged ≥45 years in the Australian 45 and Up Study (11,127 deaths; median follow-up 3.9 years. Hazard ratios (HR for all-cause mortality associated with BMI were modelled according to different methods of accounting for illness at baseline, finer versus broader gradations of BMI and choice of reference group, adjusting for potential confounders. RESULTS: In analyses using the broad World Health Organization (WHO categories, the all-cause mortality HR was significantly lower in the overweight category (25.0-29.99 kg/m², than the normal weight (18.5-24.99 kg/m² category. However, in analyses accounting for baseline illness, which excluded those with pre-existing illness at baseline, ever-smokers and the first 2 years of follow up, absolute age-standardised mortality rates varied up to two-fold between finer BMI categories within the WHO normal weight category; rates were lowest at 22.5-24.99 kg/m² and mortality HRs increased steadily for BMI above (p(trend<0.02 and below (p(trend<0.003 this reference category. Hence, the breadth of the BMI categories used and whether or not baseline illness is accounted for explain the apparent discrepancies between reported BMI-mortality associations. CONCLUSION: Using fine BMI categories and the category with the lowest absolute rates as the reference group and accounting for the potential confounding effects of baseline illness is likely to yield the most reliable risk estimates for establishing the independent relationship of BMI to all-cause mortality. These results and those of other studies indicate that a BMI of 22.5-24.99 kg

  9. Methodology for Preliminary Design of Electrical Microgrids

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, Richard P. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Stamp, Jason E. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Eddy, John P. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Henry, Jordan M [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Munoz-Ramos, Karina [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Abdallah, Tarek [U.S. Army Corps of Engineers, Washington, DC (United States)

    2015-09-30

    Many critical loads rely on simple backup generation to provide electricity in the event of a power outage. An Energy Surety Microgrid TM can protect against outages caused by single generator failures to improve reliability. An ESM will also provide a host of other benefits, including integration of renewable energy, fuel optimization, and maximizing the value of energy storage. The ESM concept includes a categorization for microgrid value proposi- tions, and quantifies how the investment can be justified during either grid-connected or utility outage conditions. In contrast with many approaches, the ESM approach explic- itly sets requirements based on unlikely extreme conditions, including the need to protect against determined cyber adversaries. During the United States (US) Department of Defense (DOD)/Department of Energy (DOE) Smart Power Infrastructure Demonstration for Energy Reliability and Security (SPIDERS) effort, the ESM methodology was successfully used to develop the preliminary designs, which direct supported the contracting, construction, and testing for three military bases. Acknowledgements Sandia National Laboratories and the SPIDERS technical team would like to acknowledge the following for help in the project: * Mike Hightower, who has been the key driving force for Energy Surety Microgrids * Juan Torres and Abbas Akhil, who developed the concept of microgrids for military installations * Merrill Smith, U.S. Department of Energy SPIDERS Program Manager * Ross Roley and Rich Trundy from U.S. Pacific Command * Bill Waugaman and Bill Beary from U.S. Northern Command * Melanie Johnson and Harold Sanborn of the U.S. Army Corps of Engineers Construc- tion Engineering Research Laboratory * Experts from the National Renewable Energy Laboratory, Idaho National Laboratory, Oak Ridge National Laboratory, and Pacific Northwest National Laboratory

  10. High-Surety Telemedicine in a Distributed, 'Plug-and-Play' Environment

    International Nuclear Information System (INIS)

    Craft, Richard L.; Funkhouser, Donald R.; Gallagher, Linda K.; Garcia, Rudy J.; Parks, Raymond C.; Warren, Steve

    1999-01-01

    Commercial telemedicine systems are increasingly functional, incorporating video-conferencing capabilities, diagnostic peripherals, medication reminders, and patient education services. However, these systems (1) rarely utilize information architectures which allow them to be easily integrated with existing health information networks and (2) do not always protect patient confidentiality with adequate security mechanisms. Using object-oriented methods and software wrappers, we illustrate the transformation of an existing stand-alone telemedicine system into 'plug-and-play' components that function in a distributed medical information environment. We show, through the use of open standards and published component interfaces, that commercial telemedicine offerings which were once incompatible with electronic patient record systems can now share relevant data with clinical information repositories while at the same time hiding the proprietary implementations of the respective systems. Additionally, we illustrate how leading-edge technology can secure this distributed telemedicine environment, maintaining patient confidentiality and the integrity of the associated electronic medical data. Information surety technology also encourages the development of telemedicine systems that have both read and write access to electronic medical records containing patient-identifiable information. The win-win approach to telemedicine information system development preserves investments in legacy software and hardware while promoting security and interoperability in a distributed environment

  11. High-Surety Telemedicine in a Distributed, 'Plug-andPlan' Environment

    Energy Technology Data Exchange (ETDEWEB)

    Craft, Richard L.; Funkhouser, Donald R.; Gallagher, Linda K.; Garcia, Rudy J.; Parks, Raymond C.; Warren, Steve

    1999-05-17

    Commercial telemedicine systems are increasingly functional, incorporating video-conferencing capabilities, diagnostic peripherals, medication reminders, and patient education services. However, these systems (1) rarely utilize information architectures which allow them to be easily integrated with existing health information networks and (2) do not always protect patient confidentiality with adequate security mechanisms. Using object-oriented methods and software wrappers, we illustrate the transformation of an existing stand-alone telemedicine system into `plug-and-play' components that function in a distributed medical information environment. We show, through the use of open standards and published component interfaces, that commercial telemedicine offerings which were once incompatible with electronic patient record systems can now share relevant data with clinical information repositories while at the same time hiding the proprietary implementations of the respective systems. Additionally, we illustrate how leading-edge technology can secure this distributed telemedicine environment, maintaining patient confidentiality and the integrity of the associated electronic medical data. Information surety technology also encourages the development of telemedicine systems that have both read and write access to electronic medical records containing patient-identifiable information. The win-win approach to telemedicine information system development preserves investments in legacy software and hardware while promoting security and interoperability in a distributed environment.

  12. A rigorous approach to investigating common assumptions about disease transmission: Process algebra as an emerging modelling methodology for epidemiology.

    Science.gov (United States)

    McCaig, Chris; Begon, Mike; Norman, Rachel; Shankland, Carron

    2011-03-01

    Changing scale, for example, the ability to move seamlessly from an individual-based model to a population-based model, is an important problem in many fields. In this paper, we introduce process algebra as a novel solution to this problem in the context of models of infectious disease spread. Process algebra allows us to describe a system in terms of the stochastic behaviour of individuals, and is a technique from computer science. We review the use of process algebra in biological systems, and the variety of quantitative and qualitative analysis techniques available. The analysis illustrated here solves the changing scale problem: from the individual behaviour we can rigorously derive equations to describe the mean behaviour of the system at the level of the population. The biological problem investigated is the transmission of infection, and how this relates to individual interactions.

  13. Simple Response Surface Methodology: Investigation on Advance Photocatalytic Oxidation of 4-Chlorophenoxyacetic Acid Using UV-Active ZnO Photocatalyst.

    Science.gov (United States)

    Lee, Kian Mun; Hamid, Sharifah Bee Abd

    2015-01-19

    The performance of advance photocatalytic degradation of 4-chlorophenoxyacetic acid (4-CPA) strongly depends on photocatalyst dosage, initial concentration and initial pH. In the present study, a simple response surface methodology (RSM) was applied to investigate the interaction between these three independent factors. Thus, the photocatalytic degradation of 4-CPA in aqueous medium assisted by ultraviolet-active ZnO photocatalyst was systematically investigated. This study aims to determine the optimum processing parameters to maximize 4-CPA degradation. Based on the results obtained, it was found that a maximum of 91% of 4-CPA was successfully degraded under optimal conditions (0.02 g ZnO dosage, 20.00 mg/L of 4-CPA and pH 7.71). All the experimental data showed good agreement with the predicted results obtained from statistical analysis.

  14. Estimation of block conductivities from hydrologically calibrated fracture networks. Description of methodology and application to Romuvaara investigation area

    International Nuclear Information System (INIS)

    Niemi, A.; Kontio, K.; Kuusela-Lahtinen, A.; Vaittinen, T.

    1999-03-01

    imposed gradient (K g ), determined based on flow in and out of the opposite ends of the simulation cube, differed significantly in most realisations. This means that the Darcy flux in the direction of question differs with location inside the cube. In such a case the behaviour of the cube cannot be well presented with a continuum tensor. A finer rotation angle could be used to see whether the discontinuity in K g values is due to the sparse rotation density. The fact that the non-continuity was observed in most realisations indicates, however, that the result reflects the behaviour of the rock in question rather than an 'unfortunate' selection of simulation flow direction. Due to the spatially varying Darcy flux components inside the cube, the least square approximation used for determining the continuum conductivity tensors is not the best estimate for the present data. Alternative averaging methods were, however, not investigated as it appears at the continuum approximation may not be a good representation for the data and scale anyway. Regardless of the validity of the continuum approximation, the results of the 30 m fracture network blocks give us valuable information on the flow distribution at this scale. Firstly, the results can be used to evaluate possible anisotropy, which cannot be seen from borehole well test data alone. Inspection of the simulated results showed that there appear to be no anisotropic effects. Secondly, the surface area conductivities can be compared to well test conductivities of the same scale. This comparison indicates that the conductivities determined from the well tests are clearly lower. The result is preliminary in nature, and may be case- and data-specific, but it, may also be more general and related to e.g. differences in flow and observation geometry between the two situations. (orig.)

  15. Estimation of block conductivities from hydrologically calibrated fracture networks. Description of methodology and application to Romuvaara investigation area

    Energy Technology Data Exchange (ETDEWEB)

    Niemi, A [Royal Institute of Technology, Stockholm (Sweden); Kontio, K; Kuusela-Lahtinen, A; Vaittinen, T [VTT Communities and Infrastructure, Espoo (Finland)

    1999-03-01

    imposed gradient (K{sub g}), determined based on flow in and out of the opposite ends of the simulation cube, differed significantly in most realisations. This means that the Darcy flux in the direction of question differs with location inside the cube. In such a case the behaviour of the cube cannot be well presented with a continuum tensor. A finer rotation angle could be used to see whether the discontinuity in K{sub g} values is due to the sparse rotation density. The fact that the non-continuity was observed in most realisations indicates, however, that the result reflects the behaviour of the rock in question rather than an `unfortunate` selection of simulation flow direction. Due to the spatially varying Darcy flux components inside the cube, the least square approximation used for determining the continuum conductivity tensors is not the best estimate for the present data. Alternative averaging methods were, however, not investigated as it appears at the continuum approximation may not be a good representation for the data and scale anyway. Regardless of the validity of the continuum approximation, the results of the 30 m fracture network blocks give us valuable information on the flow distribution at this scale. Firstly, the results can be used to evaluate possible anisotropy, which cannot be seen from borehole well test data alone. Inspection of the simulated results showed that there appear to be no anisotropic effects. Secondly, the surface area conductivities can be compared to well test conductivities of the same scale. This comparison indicates that the conductivities determined from the well tests are clearly lower. The result is preliminary in nature, and may be case- and data-specific, but it, may also be more general and related to e.g. differences in flow and observation geometry between the two situations. (orig.) 30 refs.

  16. [Is there a German history of evidence-based medicine? Methodic standards of therapeutic research in the early 20th century and Paul Martini's "Methodology of therapeutic investigation" (1932)].

    Science.gov (United States)

    Stoll, S; Roelcke, V; Raspe, H

    2005-07-29

    The article addresses the history of evidence-based medicine in Germany. Its aim was to reconstruct the standard of clinical-therapeutic investigation in Germany at the beginning of the 20 (th) century. By a historical investigation of five important German general medical journals for the time between 1918 and 1932 an overview of the situation of clinical investigation is given. 268 clinical trails are identified, and are analysed in view of their methodological design. Heterogeneous results are found: While few examples of sophisticated methodology exist, the design of the majority of the studies is poor. A response to the situation described can be seen in Paul Martini's book "Methodology of Therapeutic Investigation", first published in 1932. Paul Martini's biography, his criticism of the situation of clinical-therapeutic investigation of his time, the major points of his methodology and the reception of the book in Germany and abroad are described.

  17. Development of a quality management system (QMS) for borehole investigations. (2) Evaluation of applicability of QMS methodology for the hydrochemical dataset

    International Nuclear Information System (INIS)

    Kunimaru, Takanori; Ota, Kunio; Amano, Kenji; Alexander, W. Russell

    2011-01-01

    An appropriate QMS, which is among the first tools required for repository site characterisation, will save on effort by reducing errors and the requirement to resample and reanalyse - but this can only be guaranteed by continuously assessing if the system is truly fit-for-purpose and amending it as necessary based on the practical experience of the end-users on-site. A QA audit of hydrochemical datasets for boreholes HDB-1-11 from Horonobe URL project by JAEA has been carried out by the application of a formal QA analysis which is based on the methodology previously employed for groundwaters during the recent site characterisation programme in Sweden. This methodology has been successfully applied to the groundwaters of the fractured crystalline rocks of the Fennoscandian Shield and has now been adapted and applied to some of the ground- and porewaters of the Horonobe URL area. This paper will present this system in the context of the Japanese national programme and elucidate improvements made during hands-on application of the borehole investigation QMS. Further improvements foreseen for the future will also be discussed with a view of removing inter-operator variability as much as is possible. Only then can confidence by placed in URL project or repository site hydrochemical datasets. (author)

  18. Cost-effective instrumentation and control upgrades for commercial nuclear power plants surety principles developed at Sandia National Laboratories

    International Nuclear Information System (INIS)

    Rochau, G.E.; Dalton, L.J.

    1998-01-01

    Many nuclear power plants use instrument and control systems based on analog electronics. The state of the art in process control and instrumentation has advanced to use digital electronics and incorporate advanced technology. This technology includes: distributed microprocessors, fiber optics, intelligent systems (neutral networks), and advanced displays. The technology is used to optimize processes and enhance the man-machine interface while maintaining control and safety of the processes. Nuclear power plant operators have been hesitant to install this technology because of the cost and uncertainty in the regulatory process. This technology can be directly applied in an operating nuclear power plant provided a surety principle-based 'administrator' hardware system is included in parallel with the upgrade. Sandia National Laboratories has developed a rigorous approach to High Consequence System Surety (HCSS). This approach addresses the key issues of safety, security, and control while satisfying requirements for reliability and quality. We believe that HCSS principles can be applied to nuclear power plants in a manner that allows the off-the-shelf use of process control instrumentation while maintaining a high level of safety and enhancing the plant performance. We propose that an HCSS Administrator be constructed as a standardized approach to address regulatory issues. Such an administrator would allow a plant control system to be constructed with commercially available, state-to-the-art equipment and be customized to the needs of the individual plant operator. (author)

  19. Cost-effective instrumentation and control upgrades for commercial nuclear power plants using surety principles developed at Sandia National Laboratories

    International Nuclear Information System (INIS)

    Rochau, G.E.; Dalton, L.J.

    1997-01-01

    Many nuclear power plants use instrument and control systems based on analog electronics. The state of the art in process control and instrumentation has advanced to use digital electronics and incorporate advanced technology. This technology includes distributed microprocessors, fiber optics, intelligent systems (neural networks), and advanced displays. The technology is used to optimize processes and enhance the man-machine interface while maintaining control and safety of the processes. Nuclear power plant operators have been hesitant to install this technology because of the cost and uncertainty in the regulatory process. This technology can be directly applied in an operating nuclear power plant provided a surety principle-based open-quotes administratorclose quotes hardware system is included in parallel with the upgrade Sandia National Laboratories has developed a rigorous approach to High Consequence System Surety (HCSS). This approach addresses the key issues of safety, security, and control while satisfying requirements for reliability and quality. HCSS principles can be applied to nuclear power plants in a manner that allows the off-the-shelf use of process control instrumentation while maintaining a high level of safety and enhancing the plant performance. We propose that an HCSS administrator be constructed as a standardized approach to address regulatory issues. Such an administrator would allow a plant control system to be constructed with commercially available, state-of-the-art equipment and be customized to the needs of the individual plant operator

  20. 31 CFR 380.4 - What collateral may I pledge instead of a surety bond under 31 CFR part 225, and what value will...

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false What collateral may I pledge instead..., DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT COLLATERAL ACCEPTABILITY AND VALUATION Acceptable Collateral and Its Valuation § 380.4 What collateral may I pledge instead of a surety bond under 31 CFR part...

  1. Investigation and incorporation of water inflow uncertainties through stochastic modelling in a combined optimisation methodology for water allocation in Alfeios River (Greece)

    Science.gov (United States)

    Bekri, Eleni; Yannopoulos, Panayotis; Disse, Markus

    2014-05-01

    The Alfeios River plays a vital role for Western Peloponnisos in Greece from natural, ecological, social and economic aspect. The main river and its six tributaries, forming the longest watercourse and the highest streamflow rate of Peloponnisose, represent a significant source of water supply for the region, aiming at delivering and satisfying the expected demands from a variety of water users, including irrigation, drinking water supply, hydropower production and recreation. In the previous EGU General Assembly, a fuzzy-boundary-interval linear programming methodology, based on Li et al. (2010) and Bekri et al. (2012), has been presented for optimal water allocation under uncertain and vague system conditions in the Alfeios River Basin. Uncertainties associated with the benefit and cost coefficient in the objective function of the main water uses (hydropower production and irrigation) were expressed as probability distributions and fuzzy boundary intervals derived by associated α-cut levels. The uncertainty of the monthly water inflows was not incorporated in the previous initial application and the analysis of all other sources of uncertainty has been applied to two extreme hydrologic years represented by a selected wet and dry year. To manage and operate the river system, decision makers should be able to analyze and evaluate the impact of various hydrologic scenarios. In the present work, the critical uncertain parameter of water inflows is analyzed and its incorporation as an additional type of uncertainty in the suggested methodology is investigated, in order to enable the assessment of optimal water allocation for hydrologic and socio-economic scenarios based both on historical data and projected climate change conditions. For this purpose, stochastic simulation analysis for a part of the Alfeios river system is undertaken, testing various stochastic models from simple stationary ones (AR and ARMA), Thomas-Fiering, ARIMA as well as more sophisticated and

  2. Obstacles to researching the researchers: a case study of the ethical challenges of undertaking methodological research investigating the reporting of randomised controlled trials.

    Science.gov (United States)

    McKenzie, Joanne E; Herbison, G Peter; Roth, Paul; Paul, Charlotte

    2010-03-21

    Recent cohort studies of randomised controlled trials have provided evidence of within-study selective reporting bias; where statistically significant outcomes are more likely to be more completely reported compared to non-significant outcomes. Bias resulting from selective reporting can impact on meta-analyses, influencing the conclusions of systematic reviews, and in turn, evidence based clinical practice guidelines.In 2006 we received funding to investigate if there was evidence of within-study selective reporting in a cohort of RCTs submitted to New Zealand Regional Ethics Committees in 1998/99. This research involved accessing ethics applications, their amendments and annual reports, and comparing these with corresponding publications. We did not plan to obtain informed consent from trialists to view their ethics applications for practical and scientific reasons. In November 2006 we sought ethical approval to undertake the research from our institutional ethics committee. The Committee declined our application on the grounds that we were not obtaining informed consent from the trialists to view their ethics application. This initiated a seventeen month process to obtain ethical approval. This publication outlines what we planned to do, the issues we encountered, discusses the legal and ethical issues, and presents some potential solutions. Methodological research such as this has the potential for public benefit and there is little or no harm for the participants (trialists) in undertaking it. Further, in New Zealand, there is freedom of information legislation, which in this circumstance, unambiguously provided rights of access and use of the information in the ethics applications. The decision of our institutional ethics committee defeated this right and did not recognise the nature of this observational research. Methodological research, such as this, can be used to develop processes to improve quality in research reporting. Recognition of the potential

  3. Poster — Thur Eve — 30: 4D VMAT dose calculation methodology to investigate the interplay effect: experimental validation using TrueBeam Developer Mode and Gafchromic film

    Energy Technology Data Exchange (ETDEWEB)

    Teke, T; Milette, MP [BC Cancer Agency Centre for the Southern Interior (Canada); Huang, V; Thomas, SD [BC Cancer Agency Fraser Valley Cancer Centre (Canada)

    2014-08-15

    The interplay effect between the tumor motion and the radiation beam modulation during a VMAT treatment delivery alters the delivered dose distribution from the planned one. This work present and validate a method to accurately calculate the dose distribution in 4D taking into account the tumor motion, the field modulation and the treatment starting phase. A QUASAR™ respiratory motion phantom was 4D scanned with motion amplitude of 3 cm and with a 3 second period. A static scan was also acquired with the lung insert and the tumor contained in it centered. A VMAT plan with a 6XFFF beam was created on the averaged CT and delivered on a Varian TrueBeam and the trajectory log file was saved. From the trajectory log file 10 VMAT plans (one for each breathing phase) and a developer mode XML file were created. For the 10 VMAT plans, the tumor motion was modeled by moving the isocentre on the static scan, the plans were re-calculated and summed in the treatment planning system. In the developer mode, the tumor motion was simulated by moving the couch dynamically during the treatment. Gafchromic films were placed in the QUASAR phantom static and irradiated using the developer mode. Different treatment starting phase were investigated (no phase shift, maximum inhalation and maximum exhalation). Calculated and measured isodose lines and profiles are in very good agreement. For each starting phase, the dose distribution exhibit significant differences but are accurately calculated with the methodology presented in this work.

  4. Application of response surface methodology on investigating flank wear in machining hardened steel using PVD TiN coated mixed ceramic insert

    Directory of Open Access Journals (Sweden)

    Ashok Kumar Sahoo

    2013-10-01

    Full Text Available The paper presents the development of flank wear model in turning hardened EN 24 steel with PVD TiN coated mixed ceramic insert under dry environment. The paper also investigates the effect of process parameter on flank wear (VBc. The experiments have been conducted using three level full factorial design techniques. The machinability model has been developed in terms of cutting speed (v, feed (f and machining time (t as input variable using response surface methodology. The adequacy of model has been checked using correlation coefficients. As the determination coefficient, R2 (98% is higher for the model developed; the better is the response model fits the actual data. In addition, residuals of the normal probability plot lie reasonably close to a straight line showing that the terms mentioned in the model are statistically significant. The predicted flank wear has been found to lie close to the experimental value. This indicates that the developed model can be effectively used to predict the flank wear in the hard turning. Abrasion and diffusion has been found to be the dominant wear mechanism in machining hardened steel from SEM micrographs at highest parametric range. Machining time has been found to be the most significant parameter on flank wear followed by cutting speed and feed as observed from main effect plot and ANOVA study.

  5. Investigation by response surface methodology of the combined effect of pH and composition of water-methanol mixtures on the stability of curcuminoids.

    Science.gov (United States)

    D'Archivio, Angelo Antonio; Maggi, Maria Anna

    2017-03-15

    Response surface methodology, coupled to a full factorial three-level experimental design, was applied to investigate the combined influence of pH (between 7.0 and 8.6) and composition of methanol-water mixtures (between 30 and 70% v/v of methanol content) on the stability of curcumin and its analogues demethoxycurcumin and bisdemethoxycurcumin. The response plots revealed that addition of methanol noticeably improved the stability of curcuminoids, this effect being both pH- and structure-dependent. In the central point of the experimental domain, half-life times of curcumin, demethoxycurcumin and bisdemethoxycurcumin were 3.8±0.2, 27±2 and 251±17h, respectively. Stability of curcuminoids increased at lower pH and higher methanol content and decreased in the opposite vertex of the experimental domain. These results can be interpreted by assuming that addition of methanol to water produces a different variation of pH of the medium and apparent pKa values of the ionisable groups of curcuminoids. Copyright © 2016 Elsevier Ltd. All rights reserved.

  6. Investigation of the Process Conditions for Hydrogen Production by Steam Reforming of Glycerol over Ni/Al₂O₃ Catalyst Using Response Surface Methodology (RSM).

    Science.gov (United States)

    Ebshish, Ali; Yaakob, Zahira; Taufiq-Yap, Yun Hin; Bshish, Ahmed

    2014-03-19

    In this work; a response surface methodology (RSM) was implemented to investigate the process variables in a hydrogen production system. The effects of five independent variables; namely the temperature (X₁); the flow rate (X₂); the catalyst weight (X₃); the catalyst loading (X₄) and the glycerol-water molar ratio (X₅) on the H₂ yield (Y₁) and the conversion of glycerol to gaseous products (Y₂) were explored. Using multiple regression analysis; the experimental results of the H₂ yield and the glycerol conversion to gases were fit to quadratic polynomial models. The proposed mathematical models have correlated the dependent factors well within the limits that were being examined. The best values of the process variables were a temperature of approximately 600 °C; a feed flow rate of 0.05 mL/min; a catalyst weight of 0.2 g; a catalyst loading of 20% and a glycerol-water molar ratio of approximately 12; where the H₂ yield was predicted to be 57.6% and the conversion of glycerol was predicted to be 75%. To validate the proposed models; statistical analysis using a two-sample t -test was performed; and the results showed that the models could predict the responses satisfactorily within the limits of the variables that were studied.

  7. Investigating the Discriminatory Power of BCS-Biowaiver in Vitro Methodology to Detect Bioavailability Differences between Immediate Release Products Containing a Class I Drug.

    Science.gov (United States)

    Colón-Useche, Sarin; González-Álvarez, Isabel; Mangas-Sanjuan, Victor; González-Álvarez, Marta; Pastoriza, Pilar; Molina-Martínez, Irene; Bermejo, Marival; García-Arieta, Alfredo

    2015-09-08

    The purpose of this work is to investigate the discriminatory power of the Biopharmaceutics Classification System (BCS)-biowaiver in vitro methodology, i.e., to investigate if a BCS-biowaiver approach would have detected the Cmax differences observed between two zolpidem tablets and to identify the cause of the in vivo difference. Several dissolution conditions were tested with three zolpidem formulations: the reference (Stilnox), a bioequivalent formulation (BE), and a nonbioequivalent formulation (N-BE). Zolpidem is highly soluble at pH 1.2, 4.5, and 6.8. Its permeability in Caco-2 cells is higher than that of metoprolol and its transport mechanism is passive diffusion. None of the excipients (alone or in combination) showed any effect on permeability. All formulations dissolved more than 85% in 15 min in the paddle apparatus at 50 rpm in all dissolution media. However, at 30 rpm the nonbioequivalent formulation exhibited a slower dissolution rate. A slower gastric emptying rate was also observed in rats for the nonbioequivalent formulation. A slower disintegration and dissolution or a delay in gastric emptying might explain the Cmax infra-bioavailability for a highly permeable drug with short half-life. The BCS-biowaiver approach would have declared bioequivalence, although the in vivo study was not conclusive but detected a 14% mean difference in Cmax that precluded the bioequivalence demonstration. Nonetheless, these findings suggest that a slower dissolution rate is more discriminatory and that rotation speeds higher than 50 rpm should not be used in BCS-biowaivers, even if a coning effect occurs.

  8. Nonlinear Image Denoising Methodologies

    National Research Council Canada - National Science Library

    Yufang, Bao

    2002-01-01

    In this thesis, we propose a theoretical as well as practical framework to combine geometric prior information to a statistical/probabilistic methodology in the investigation of a denoising problem...

  9. Investigation of optimal seismic design methodology for piping systems supported by elasto-plastic dampers. Part. 2. Applicability for seismic waves with various frequency characteristics

    International Nuclear Information System (INIS)

    Ito, Tomohiro; Michiue, Masashi; Fujita, Katsuhisa

    2010-01-01

    In this study, the applicability of a previously developed optimal seismic design methodology, which can consider the structural integrity of not only piping systems but also elasto-plastic supporting devices, is studied for seismic waves with various frequency characteristics. This methodology employs a genetic algorithm and can search the optimal conditions such as the supporting location and the capacity and stiffness of the supporting devices. Here, a lead extrusion damper is treated as a typical elasto-plastic damper. Numerical simulations are performed using a simple piping system model. As a result, it is shown that the proposed optimal seismic design methodology is applicable to the seismic design of piping systems subjected to seismic waves with various frequency characteristics. The mechanism of optimization is also clarified. (author)

  10. What does it feel like to live here? Exploring sensory ethnography as a collaborative methodology for investigating social determinants of health in place.

    Science.gov (United States)

    Sunderland, N; Bristed, H; Gudes, O; Boddy, J; Da Silva, M

    2012-09-01

    This paper introduces sensory ethnography as a methodology for studying residents' daily lived experience of social determinants of health (SDOH) in place. Sensory ethnography is an expansive option for SDOH research because it encourages participating researchers and residents to "turn up" their senses to identify how previously ignored or "invisible" sensory experiences shape local health and wellbeing. Sensory ethnography creates a richer and deeper understanding of the relationships between place and health than existing research methods that focus on things that are more readily observable or quantifiable. To highlight the methodology in use we outline our research activities and learnings from the Sensory Ethnography of Logan-Beaudesert (SELB) pilot study. We discuss theory, data collection methods, preliminary outcomes, and methodological learnings that will be relevant to researchers who wish to use sensory ethnography or develop deeper understandings of place and health generally. Copyright © 2012 Elsevier Ltd. All rights reserved.

  11. Culture Clash? Investigating constructions of sexual and reproductive health from the perspective of 1.5 generation migrants in Australia using Q methodology.

    Science.gov (United States)

    Dune, T; Perz, J; Mengesha, Z; Ayika, D

    2017-04-04

    In Australia, those who migrate as children or adolescents (1.5 generation migrants) may have entered a new cultural environment at a crucial time in their psychosexual development. These migrants may have to contend with constructions of sexual and reproductive health from at least two cultures which may be at conflict on the matter. This study was designed to investigate the role of culture in constructions of sexual and reproductive health and health care seeking behaviour from the perspective of 1.5 generation migrants. Forty-two adults from various ethno-cultural backgrounds took part in this Q methodological study. Online, participants rank-ordered forty-two statements about constructions of sexual and reproductive health and health seeking behaviours based on the level to which they agreed or disagreed with them. Participants then answered a series of questions about the extent to which their ethnic/cultural affiliations influenced their identity. A by-person factor analysis was then conducted, with factors extracted using the centroid technique and a varimax rotation. A seven-factor solution provided the best conceptual fit for constructions of sexual and reproductive health and help-seeking. Factor A compared progressive and traditional sexual and reproductive health values. Factor B highlighted migrants' experiences through two cultural lenses. Factor C explored migrant understandings of sexual and reproductive health in the context of culture. Factor D explained the role of culture in migrants' intimate relationships, beliefs about migrant sexual and reproductive health and engagement of health care services. Factor E described the impact of culture on sexual and reproductive health related behaviour. Factor F presented the messages migrant youth are given about sexual and reproductive health. Lastly, Factor G compared constructions of sexual and reproductive health across cultures. This study has demonstrated that when the cultural norms of migrants

  12. Em busca de metodologias investigativas com as crianças e suas culturas Searching for investigative methodologies with children and their cultures

    Directory of Open Access Journals (Sweden)

    Ana Cristina Coll Delgado

    2005-05-01

    Full Text Available Este artigo apresenta reflexões sobre metodologias investigativas com as crianças e suas culturas, a partir do referencial da Sociologia da Infância. Este campo teórico considera as crianças como atores sociais que acionam estratégias de luta por meio das suas culturas de pares. Na produção acadêmica brasileira sobre as crianças e suas culturas, ainda não possuímos uma tradição de estudos que tratem das vozes das crianças por elas próprias. A questão motivou a organização deste texto em três sessões. Na primeira, refletimos sobre a ausência das crianças como protagonistas das pesquisas brasileiras e as influências de uma ciência androcêntrica, que nasce com a modernidade. Na segunda, apresentamos a etnografia das infâncias como possibilidade de contato e aceitação dos adultos nos grupos infantis para a compreensão das suas culturas de pares. Na terceira, levantamos algumas idéias acerca dos traços das culturas infantis como base teórica para a construção de outros modos de fazer pesquisa que articulem ciência e estética, razão e emoção, fantasia e realidade.This article features reflections on investigative methodologies with children and their cultures from the point of view of Sociology of Childhood. This theoretical field considers children as social actors that build fight strategies by means of their peer cultures. The Brazilian academic production on children and their cultures does not have yet a tradition of studies on the voices of children themselves. This issue has led to the organization of this text in three sections. In the first section we think of the absence of children in Brazilian researches and the influences of an androcentric science emerging with modernity. In the second section we present the ethnography of childhoods as a possibility of contact and acceptance of adults by groups of children in order to understand their peer cultures. In the third section we raise some ideas

  13. An investigation into the use of recorded music as a surgical intervention: A systematic, critical review of methodologies used in recent adult controlled trials.

    Science.gov (United States)

    Williams, Courtney; Hine, Trevor

    2018-04-01

    While music is being increasingly used as a surgical intervention, the types of music used and the reasons underlying their selection remain inconsistent. Empirical research into the efficacy of such musical interventions is therefore problematic. To provide clear guidelines for musical selection and employment in surgical interventions, created through a synthesis of the literature. The aim is to examine how music is implemented in surgical situations, and to provide guidance for the selection and composition of music for future interventions. English language quantitative surgical intervention studies from Science Direct, ProQuest, and Sage Journals Online, all published within the last 10 years and featuring recorded music, were systematically reviewed. Variables investigated included: the time the intervention was performed, the intervention length, the outcomes targeted, music description (general and specific), theoretical frameworks underlying the selection of the music, whether or not a musical expert was involved, participant music history, and the participants' feedback on the chosen music. Several aspects contribute to the lack of scientific rigour regarding music selection in this field, including the lack of a theoretical framework or frameworks, no involvement of musical experts, failure to list the music tracks used, and the use of vague and subjective terms in general music descriptions. Patients are frequently allowed to select music (risking both choosing music that has an adverse effect and making study replication difficult), and patient music history and listening habits are rarely considered. Crucially, five primary theoretical frameworks underlying the effectiveness of music arose in the literature (distraction, relaxation, emotional shift, entrainment, and endogenous analgesia), however music was rarely selected to enhance any of these mechanisms. Further research needs to be conducted to ensure that music is selected according to a

  14. Innovative Methodologies for 21st Century Learning, Teaching and Assessment: A Convenience Sampling Investigation into the Use of Social Media Technologies in Higher Education

    Science.gov (United States)

    Kivunja, Charles

    2015-01-01

    The advent of the Web as a social technology has created opportunities for the creation of informal learning environments, which have potential for innovative methodologies in learning, teaching and assessment. However, as Wolfe (2001) admonishes, "contrary to the rhetoric of cheerleaders, the Web places greater demands on students than…

  15. Investigating the association between medication adherence and health-related quality of life in COPD : Methodological challenges when using a proxy measure of adherence

    NARCIS (Netherlands)

    Boland, Melinde R. S.; van Boven, Job F. M.; Kruis, Annemarije L.; Chavannes, Niels H.; van der Molen, Thys; Goossens, Lucas M. A.; Rutten-van Molken, Maureen P. M. H.

    Background: The association between non-adherence to medication and health-related quality-of-life (HRQoL) in Chronic Obstructive Pulmonary Disease (COPD) remains poorly understood. Different ways to deal with methodological challenges to estimate this association have probably contributed to

  16. On methodology

    DEFF Research Database (Denmark)

    Cheesman, Robin; Faraone, Roque

    2002-01-01

    This is an English version of the methodology chapter in the authors' book "El caso Berríos: Estudio sobre información errónea, desinformación y manipulación de la opinión pública".......This is an English version of the methodology chapter in the authors' book "El caso Berríos: Estudio sobre información errónea, desinformación y manipulación de la opinión pública"....

  17. Methodological guidelines

    International Nuclear Information System (INIS)

    Halsnaes, K.; Callaway, J.M.; Meyer, H.J.

    1999-01-01

    The guideline document establishes a general overview of the main components of climate change mitigation assessment. This includes an outline of key economic concepts, scenario structure, common assumptions, modelling tools and country study assumptions. The guidelines are supported by Handbook Reports that contain more detailed specifications of calculation standards, input assumptions and available tools. The major objectives of the project have been provided a methodology, an implementing framework and a reporting system which countries can follow in meeting their future reporting obligations under the FCCC and for GEF enabling activities. The project builds upon the methodology development and application in the UNEP National Abatement Coasting Studies (UNEP, 1994a). The various elements provide countries with a road map for conducting climate change mitigation studies and submitting national reports as required by the FCCC. (au) 121 refs

  18. Methodological guidelines

    Energy Technology Data Exchange (ETDEWEB)

    Halsnaes, K.; Callaway, J.M.; Meyer, H.J.

    1999-04-01

    The guideline document establishes a general overview of the main components of climate change mitigation assessment. This includes an outline of key economic concepts, scenario structure, common assumptions, modelling tools and country study assumptions. The guidelines are supported by Handbook Reports that contain more detailed specifications of calculation standards, input assumptions and available tools. The major objectives of the project have been provided a methodology, an implementing framework and a reporting system which countries can follow in meeting their future reporting obligations under the FCCC and for GEF enabling activities. The project builds upon the methodology development and application in the UNEP National Abatement Coasting Studies (UNEP, 1994a). The various elements provide countries with a road map for conducting climate change mitigation studies and submitting national reports as required by the FCCC. (au) 121 refs.

  19. New methodology to investigate potential contaminant mass fluxes at the stream-aquifer interface by combining integral pumping tests and streambed temperatures

    International Nuclear Information System (INIS)

    Kalbus, E.; Schmidt, C.; Bayer-Raich, M.; Leschik, S.; Reinstorf, F.; Balcke, G.U.; Schirmer, M.

    2007-01-01

    The spatial pattern and magnitude of mass fluxes at the stream-aquifer interface have important implications for the fate and transport of contaminants in river basins. Integral pumping tests were performed to quantify average concentrations of chlorinated benzenes in an unconfined aquifer partially penetrated by a stream. Four pumping wells were operated simultaneously for a time period of 5 days and sampled for contaminant concentrations. Streambed temperatures were mapped at multiple depths along a 60 m long stream reach to identify the spatial patterns of groundwater discharge and to quantify water fluxes at the stream-aquifer interface. The combined interpretation of the results showed average potential contaminant mass fluxes from the aquifer to the stream of 272 μg m -2 d -1 MCB and 71 μg m -2 d -1 DCB, respectively. This methodology combines a large-scale assessment of aquifer contamination with a high-resolution survey of groundwater discharge zones to estimate contaminant mass fluxes between aquifer and stream. - We provide a new methodology to quantify the potential contaminant mass flux from an aquifer to a stream

  20. Investigating the Impact uf E-Learning as an Alternative for Business Education in Pharmaceutical Industry in Romania by Roi Methodology

    Directory of Open Access Journals (Sweden)

    Petruţa Blaga

    2014-08-01

    Full Text Available The capability of organizations to accumulate and apply new knowledge is a key factor in order to achieve the new competitive standards. A continuous changing diversity, to which the need of adaptation to the changes of external environment is added, speeds up the rate of development and business education. The new information and communication technologies speed up the rate of change and increase the need of education that is subject to a higher information flow. The achievements of information technology, along with changes within society, determine the creation of new paradigms for business education and training. Under these circumstances, e-learning has become one of the main educational forms of human resources in business. This research aims to measure the impact of some initiatives within human resources on an organization, market leader within pharmaceutical field, namely measuring the efficiency of business education programs concerning human resources through e-learning. Under these circumstances, the carried-out research aims to put into practice the theoretical frame of ROI (Return on Investment methodology of evaluating the business education programs concerning human resources in five stages, suggested by J. J. Phillips. The research validates theoretical data of the surveyed model and it is based on the analysis of the data gathering process within the ROI Methodology. This work shows only aspects related to the measuring of the participants` reaction towards the e-learning business education program, respectively

  1. MIRD methodology

    International Nuclear Information System (INIS)

    Rojo, Ana M.; Gomez Parada, Ines

    2004-01-01

    The MIRD (Medical Internal Radiation Dose) system was established by the Society of Nuclear Medicine of USA in 1960 to assist the medical community in the estimation of the dose in organs and tissues due to the incorporation of radioactive materials. Since then, 'MIRD Dose Estimate Report' (from the 1 to 12) and 'Pamphlets', of great utility for the dose calculations, were published. The MIRD system was planned essentially for the calculation of doses received by the patients during nuclear medicine diagnostic procedures. The MIRD methodology for the absorbed doses calculations in different tissues is explained

  2. PSA methodology

    Energy Technology Data Exchange (ETDEWEB)

    Magne, L

    1997-12-31

    The purpose of this text is first to ask a certain number of questions on the methods related to PSAs. Notably we will explore the positioning of the French methodological approach - as applied in the EPS 1300{sup 1} and EPS 900{sup 2} PSAs - compared to other approaches (Part One). This reflection leads to more general reflection: what contents, for what PSA? This is why, in Part Two, we will try to offer a framework for definition of the criteria a PSA should satisfy to meet the clearly identified needs. Finally, Part Three will quickly summarize the questions approached in the first two parts, as an introduction to the debate. 15 refs.

  3. PSA methodology

    International Nuclear Information System (INIS)

    Magne, L.

    1996-01-01

    The purpose of this text is first to ask a certain number of questions on the methods related to PSAs. Notably we will explore the positioning of the French methodological approach - as applied in the EPS 1300 1 and EPS 900 2 PSAs - compared to other approaches (Part One). This reflection leads to more general reflection: what contents, for what PSA? This is why, in Part Two, we will try to offer a framework for definition of the criteria a PSA should satisfy to meet the clearly identified needs. Finally, Part Three will quickly summarize the questions approached in the first two parts, as an introduction to the debate. 15 refs

  4. A methodology to investigate the contribution of conduction and radiation heat transfer to the effective thermal conductivity of packed graphite pebble beds, including the wall effect

    Energy Technology Data Exchange (ETDEWEB)

    De Beer, M., E-mail: maritz.db@gmail.com [School of Mechanical and Nuclear Engineering, North-West University, Private Bag X6001, Potchefstroom 2520 (South Africa); Du Toit, C.G., E-mail: Jat.DuToit@nwu.ac.za [School of Mechanical and Nuclear Engineering, North-West University, Private Bag X6001, Potchefstroom 2520 (South Africa); Rousseau, P.G., E-mail: pieter.rousseau@uct.ac.za [Department of Mechanical Engineering, University of Cape Town, Private Bag X3, Rondebosch 7701 (South Africa)

    2017-04-01

    Highlights: • The radiation and conduction components of the effective thermal conductivity are separated. • Near-wall effects have a notable influence on the effective thermal conductivity. • Effective thermal conductivity is a function of the macro temperature gradient. • The effective thermal conductivity profile shows a characteristic trend. • The trend is a result of the interplay between conduction and radiation. - Abstract: The effective thermal conductivity represents the overall heat transfer characteristics of a packed bed of spheres and must be considered in the analysis and design of pebble bed gas-cooled reactors. During depressurized loss of forced cooling conditions the dominant heat transfer mechanisms for the passive removal of decay heat are radiation and conduction. Predicting the value of the effective thermal conductivity is complex since it inter alia depends on the temperature level and temperature gradient through the bed, as well as the pebble packing structure. The effect of the altered packing structure in the wall region must therefore also be considered. Being able to separate the contributions of radiation and conduction allows a better understanding of the underlying phenomena and the characteristics of the resultant effective thermal conductivity. This paper introduces a purpose-designed test facility and accompanying methodology that combines physical measurements with Computational Fluid Dynamics (CFD) simulations to separate the contributions of radiation and conduction heat transfer, including the wall effects. Preliminary results obtained with the methodology offer important insights into the trends observed in the experimental results and provide a better understanding of the interplay between the underlying heat transfer phenomena.

  5. A fast fault protection based on direction of bus-side capacitor discharge current for a high-surety power supply

    DEFF Research Database (Denmark)

    Li, Haijin; Chen, Min; Yang, Boping

    2017-01-01

    A short-circuit fault protection strategy based on the direction of bus-side capacitor discharge current for a high-surety power supply, known as Super Uninterruptable Power Supply (Super UPS), is studied in this paper. It consists of multiple energy sources and storage components. All energy...... strategy is necessary to keep the uninterruptable power for the critical load. In this paper, the characteristics of the short-circuit fault are analyzed first. Then, a fast short-circuit fault locating and isolating strategy based on the direction of the discharge current of the busside capacitors...

  6. Changing methodologies in TESOL

    CERN Document Server

    Spiro, Jane

    2013-01-01

    Covering core topics from vocabulary and grammar to teaching, writing speaking and listening, this textbook shows you how to link research to practice in TESOL methodology. It emphasises how current understandings have impacted on the language classroom worldwide and investigates the meaning of 'methods' and 'methodology' and the importance of these for the teacher: as well as the underlying assumptions and beliefs teachers bring to bear in their practice. By introducing you to language teaching approaches, you will explore the way these are influenced by developments in our understanding of l

  7. Investigating Safety, Safeguards and Security (3S) Synergies to Support Infrastructure Development and Risk-Informed Methodologies for 3S by Design

    International Nuclear Information System (INIS)

    Suzuki, M.; Izumi, Y.; Kimoto, T.; Naoi, Y.; Inoue, T.; Hoffheins, B.

    2010-01-01

    In 2008, Japan and other G8 countries pledged to support the Safeguards, Safety, and Security (3S) Initiative to raise awareness of 3S worldwide and to assist countries in setting up nuclear energy infrastructures that are essential cornerstones of a successful nuclear energy program. The goals of the 3S initiative are to ensure that countries already using nuclear energy or those planning to use nuclear energy are supported by strong national programs in safety, security, and safeguards not only for reliability and viability of the programs, but also to prove to the international audience that the programs are purely peaceful and that nuclear material is properly handled, accounted for, and protected. In support of this initiative, Japan Atomic Energy Agency (JAEA) has been conducting detailed analyses of the R and D programs and cultures of each of the 'S' areas to identify overlaps where synergism and efficiencies might be realized, to determine where there are gaps in the development of a mature 3S culture, and to coordinate efforts with other Japanese and international organizations. As an initial outcome of this study, incoming JAEA employees are being introduced to 3S as part of their induction training and the idea of a President's Award program is being evaluated. Furthermore, some overlaps in 3S missions might be exploited to share facility instrumentation as with Joint-Use-Equipment (JUE), in which cameras and radiation detectors, are shared by the State and IAEA. Lessons learned in these activities can be applied to developing more efficient and effective 3S infrastructures for incorporating into Safeguards by Design methodologies. They will also be useful in supporting human resources and technology development projects associated with Japan's planned nuclear security center for Asia, which was announced during the 2010 Nuclear Security Summit. In this presentation, a risk-informed approach regarding integration of 3S will be introduced. An initial

  8. Investigation and optimization of the novel UASB-MFC integrated system for sulfate removal and bioelectricity generation using the response surface methodology (RSM).

    Science.gov (United States)

    Zhang, Baogang; Zhang, Jing; Yang, Qi; Feng, Chuanping; Zhu, Yuling; Ye, Zhengfang; Ni, Jinren

    2012-11-01

    COD/sulfate ratio and hydraulic residence time (HRT), both of which influence sulfate loadings jointly, are recognized as the most two important affecting factors for sulfate removal and bioelectricity generation in the novel up-flow anaerobic sludge blanket reactor-microbial fuel cell (UASB-MFC) integrated system. The response surface methodology (RSM) was employed for the optimization of this system and the optimum condition with COD/sulfate ratio of 2.3 and HRT of 54.3h was obtained with the target of maximizing the power output. In terms of maximizing the total sulfate removal efficiency, the obtained optimum condition was COD/sulfate ratio of 3.7 and HRT of 55.6h. Experimental results indicated the undistorted simulation and reliable optimized results. These demonstrated that RSM was effective to evaluate and optimize the UASB-MFC system for sulfate removal and energy recovery, providing a promising guide to further improvement of the system for potential applications. Copyright © 2012 Elsevier Ltd. All rights reserved.

  9. Investigation of optimal conditions for production of highly crystalline nanocellulose with increased yield via novel Cr(III)-catalyzed hydrolysis: Response surface methodology.

    Science.gov (United States)

    Chen, You Wei; Lee, Hwei Voon; Abd Hamid, Sharifah Bee

    2017-12-15

    For the first time, a highly efficient Cr(NO 3 ) 3 catalysis system was proposed for optimization the yield and crystallinity of nanocellulose end product. A five-level three-factor central composite design coupled with response surface methodology was employed to elucidate parameters interactions between three design factors, namely reaction temperature (x 1 ), reaction time (x 2 ) and concentration of Cr(NO 3 ) 3 (x 3 ) over a broad range of process conditions and determine the effect on crystallinity index and product yield. The developed models predicted the maximum nanocellulose yield of 87% at optimum process conditions of 70.6°C, 1.48h, and 0.48M Cr(NO 3 ) 3 . At these conditions, the obtained nanocellulose presented high crystallinity index (75.3%), spider-web-like interconnected network morphology with the average width of 31.2±14.3nm. In addition, the yielded nanocellulose rendered a higher thermal stability than that of original cellulosic source and expected to be widely used as reinforcement agent in bio-nanocomposites materials. Copyright © 2017 Elsevier Ltd. All rights reserved.

  10. Opening up openness: a theoretical sort following critical incidents methodology and a meta-analytic investigation of the trait family measures.

    Science.gov (United States)

    Connelly, Brian S; Ones, Deniz S; Davies, Stacy E; Birkland, Adib

    2014-01-01

    Existing taxonomies of Openness's facet structure have produced widely divergent results, and there is limited comprehensive empirical evidence about how Openness-related scales on existing personality inventories align within the 5-factor framework. In Study 1, we used a critical incidents sorting methodology to identify 11 categories of Openness measures; in Study 2, we meta-analyzed the relationships of these categories with global markers of the Big Five traits (utilizing data from 106 samples with a total sample size of N = 35,886). Our results identified 4 true facets of Openness: aestheticism, openness to sensations, nontraditionalism, and introspection. Measures of these facets were unadulterated by variance from other Big Five traits. Many traits frequently conceptualized as facets of Openness (e.g., innovation/creativity, variety-seeking, and tolerance) emerged as trait compounds that, although related to Openness, are also dependent on other Big Five traits. We discuss how Openness should be conceptualized, measured, and studied in light of the empirically based, refined taxonomy emerging from this research.

  11. Investigation of soil properties influence on the heavy metals sorption by plants and possibilities for prediction of their bioaccumulation by response surface methodology

    Directory of Open Access Journals (Sweden)

    Veličković Zlate

    2016-01-01

    Full Text Available The aim of this study was to determine soil properties influence on the heavy metals sorption by vegetables which are used in the diet and possibilities for prediction of their bioaccumulation by response surface methodology (RSM. Lettuce was used as biosorbent, and cadmium (Cd and lead (Pb were used as contaminants. Lettuce is grown on compost (previously contaminated with different concentrations of Cd and Pb which pH was adjusted with different amounts of NPK fertilizers. The content of heavy metals was determined by ICP-MS. Results showed that Cd content in lettuce was below the toxic values, but Pb concentration was above allowable, which indicates that limit value for Pb is not set in accordance with the food safety regulations. It was found that the heavy metals accumulation in plants depends not only on its content in the soil, but also on the plant affinity to the specific metal, and the individual or the interactive effects of different soil properties. Through the transfer factor it was found that lettuce has a much higher affinity to Cd in relation to Pb. RSM has proved to be very good for the examination of a large number of variables with a small number of experiments.

  12. Testing methodologies

    Energy Technology Data Exchange (ETDEWEB)

    Bender, M.A.

    1990-01-01

    Several methodologies are available for screening human populations for exposure to ionizing radiation. Of these, aberration frequency determined in peripheral blood lymphocytes is the best developed. Individual exposures to large doses can easily be quantitated, and population exposures to occupational levels can be detected. However, determination of exposures to the very low doses anticipated from a low-level radioactive waste disposal site is more problematical. Aberrations occur spontaneously, without known cause. Exposure to radiation induces no new or novel types, but only increases their frequency. The limitations of chromosomal aberration dosimetry for detecting low level radiation exposures lie mainly in the statistical signal to noise'' problem, the distribution of aberrations among cells and among individuals, and the possible induction of aberrations by other environmental occupational or medical exposures. However, certain features of the human peripheral lymphocyte-chromosomal aberration system make it useful in screening for certain types of exposures. Future technical developments may make chromosomal aberration dosimetry more useful for low-level radiation exposures. Other methods, measuring gene mutations or even minute changes on the DNA level, while presently less will developed techniques, may eventually become even more practical and sensitive assays for human radiation exposure. 15 refs.

  13. Testing methodologies

    International Nuclear Information System (INIS)

    Bender, M.A.

    1990-01-01

    Several methodologies are available for screening human populations for exposure to ionizing radiation. Of these, aberration frequency determined in peripheral blood lymphocytes is the best developed. Individual exposures to large doses can easily be quantitated, and population exposures to occupational levels can be detected. However, determination of exposures to the very low doses anticipated from a low-level radioactive waste disposal site is more problematical. Aberrations occur spontaneously, without known cause. Exposure to radiation induces no new or novel types, but only increases their frequency. The limitations of chromosomal aberration dosimetry for detecting low level radiation exposures lie mainly in the statistical ''signal to noise'' problem, the distribution of aberrations among cells and among individuals, and the possible induction of aberrations by other environmental occupational or medical exposures. However, certain features of the human peripheral lymphocyte-chromosomal aberration system make it useful in screening for certain types of exposures. Future technical developments may make chromosomal aberration dosimetry more useful for low-level radiation exposures. Other methods, measuring gene mutations or even minute changes on the DNA level, while presently less will developed techniques, may eventually become even more practical and sensitive assays for human radiation exposure. 15 refs

  14. Learning How to Be a Research-Minded Teacher: Four Instrumental Music Education Students Investigate Good Music Teaching through Case Study Methodology

    Science.gov (United States)

    Sindberg, Laura K.

    2016-01-01

    Increasing evidence, both in general education and music education, points to the significance of inquiry as a part of teacher preparation. The purpose of this case study was to investigate the ways in which an introductory research project would help preservice music educators understand good "music teaching" and to discover the extent…

  15. Implementing DBS methodology for the determination of Compound A in monkey blood: GLP method validation and investigation of the impact of blood spreading on performance.

    Science.gov (United States)

    Fan, Leimin; Lee, Jacob; Hall, Jeffrey; Tolentino, Edward J; Wu, Huaiqin; El-Shourbagy, Tawakol

    2011-06-01

    This article describes validation work for analysis of an Abbott investigational drug (Compound A) in monkey whole blood with dried blood spots (DBS). The impact of DBS spotting volume on analyte concentration was investigated. The quantitation range was between 30.5 and 10,200 ng/ml. Accuracy and precision of quality controls, linearity of calibration curves, matrix effect, selectivity, dilution, recovery and multiple stabilities were evaluated in the validation, and all demonstrated acceptable results. Incurred sample reanalysis was performed with 57 out of 58 samples having a percentage difference (versus the mean value) less than 20%. A linear relationship between the spotting volume and the spot area was drawn. The influence of spotting volume on concentration was discussed. All validation results met good laboratory practice acceptance requirements. Radial spreading of blood on DBS cards can be a factor in DBS concentrations at smaller spotting volumes.

  16. Salmonella enterica serovar Enteritidis phage type 4 outbreak associated with eggs in a large prison, London 2009: an investigation using cohort and case/non-case study methodology.

    Science.gov (United States)

    Davies, A R; Ruggles, R; Young, Y; Clark, H; Reddell, P; Verlander, N Q; Arnold, A; Maguire, H

    2013-05-01

    In September 2009, an outbreak of Salmonella enterica serovar Enteritidis affected 327 of 1419 inmates at a London prison. We applied a cohort design using aggregated data from the kitchen about portions of food distributed, aligned this with individual food histories from 124 cases (18 confirmed, 106 probable) and deduced the exposures of those remaining well. Results showed that prisoners eating egg cress rolls were 26 times more likely to be ill [risk ratio 25.7, 95% confidence interval (CI) 15.5-42.8, Pinvestigation was strengthened by environmental and microbiological investigations. This paper outlines an approach to investigations in large complex settings where aggregate data for exposures may be available, and led to the development of guidelines for the management of future gastrointestinal outbreaks in prison settings.

  17. Methodology and early findings of the Diabetes Management Project: a cohort study investigating the barriers to optimal diabetes care in diabetic patients with and without diabetic retinopathy.

    Science.gov (United States)

    Lamoureux, Ecosse Luc; Fenwick, Eva; Xie, Jing; Mcauley, Annie; Nicolaou, Theona; Larizza, Melanie; Rees, Gwyn; Qureshi, Salmaan; Wong, Tien Yin; Benarous, Rehab; Dirani, Mohamed

    2012-01-01

    The Diabetes Management Project is investigating the clinical, behavioural and psychosocial barriers to optimal diabetes care in individuals with and without diabetic retinopathy. Prospective cohort. Two hundred and twenty-three and 374 patients without and with diabetic retinopathy, respectively. All individuals underwent a comprehensive dilated eye test, anthropometric measurements, blood and urine samples, and psychosocial questionnaires. Good glycaemic control was defined as glycosylated haemoglobin Management Project, developed to assess factors associated with suboptimal diabetes care. © 2011 The Authors. Clinical and Experimental Ophthalmology © 2011 Royal Australian and New Zealand College of Ophthalmologists.

  18. Research methodology

    DEFF Research Database (Denmark)

    Kuada, John

    This book deals with how students should use of research methods in their university projects. It aims at helping students in developing comprehensive research strategies for their projects. It also provides introduction to issues of philosophy of science as applied in the social sciences....... That is it provides them with a fair understanding of the root assumptions that guide researchers in their investigations and how these assumptions inform their theoretical thinking and choice of methods....

  19. [Investigation methodology and application on scientific and technological personnel of traditional Chinese medical resources based on data from Chinese scientific research paper].

    Science.gov (United States)

    Li, Hai-yan; Li, Yuan-hai; Yang, Yang; Liu, Fang-zhou; Wang, Jing; Tian, Ye; Yang, Ce; Liu, Yang; Li, Meng; Sun Li-ying

    2015-12-01

    The aim of this study is to identify the present status of the scientific and technological personnel in the field of traditional Chinese medicine (TCM) resource science. Based on the data from Chinese scientific research paper, an investigation regarding the number of the personnel, the distribution, their output of paper, their scientific research teams, high-yield authors and high-cited authors was conducted. The study covers seven subfields of traditional Chinese medicine identification, quality standard, Chinese medicine cultivation, harvest processing of TCM, market development and resource protection and resource management, as well as 82 widely used Chinese medicine species, such as Ginseng and Radix Astragali. One hundred and fifteen domain authority experts were selected based on the data of high-yield authors and high-cited authors. The database system platform "Skilled Scientific and Technological Personnel in the field of Traditional Chinese Medicine Resource Science-Chinese papers" was established. This platform successfully provided the retrieval result of the personnel, output of paper, and their core research team by input the study field, year, and Chinese medicine species. The investigation provides basic data of scientific and technological personnel in the field of traditional Chinese medicine resource science for administrative agencies and also evidence for the selection of scientific and technological personnel and construction of scientific research teams.

  20. The Face-to-Face Light Detection Paradigm: A New Methodology for Investigating Visuospatial Attention Across Different Face Regions in Live Face-to-Face Communication Settings.

    Science.gov (United States)

    Thompson, Laura A; Malloy, Daniel M; Cone, John M; Hendrickson, David L

    2010-01-01

    We introduce a novel paradigm for studying the cognitive processes used by listeners within interactive settings. This paradigm places the talker and the listener in the same physical space, creating opportunities for investigations of attention and comprehension processes taking place during interactive discourse situations. An experiment was conducted to compare results from previous research using videotaped stimuli to those obtained within the live face-to-face task paradigm. A headworn apparatus is used to briefly display LEDs on the talker's face in four locations as the talker communicates with the participant. In addition to the primary task of comprehending speeches, participants make a secondary task light detection response. In the present experiment, the talker gave non-emotionally-expressive speeches that were used in past research with videotaped stimuli. Signal detection analysis was employed to determine which areas of the face received the greatest focus of attention. Results replicate previous findings using videotaped methods.

  1. Dynamic investigation of electron trapping and charge decay in electron-irradiated Al sub 2 O sub 3 in a scanning electron microscope: Methodology and mechanisms

    CERN Document Server

    Fakhfakh, S; Belhaj, M; Fakhfakh, Z; Kallel, A; Rau, E I

    2002-01-01

    The charging and discharging of polycrystalline Al sub 2 O sub 3 submitted to electron-irradiation in a scanning electron microscope (SEM) are investigated by means of the displacement current method. To circumvent experimental shortcomings inherent to the use of the basic sample holder, a redesign of the latter is proposed and tests are carried out to verify its operation. The effects of the primary beam accelerating voltage on charging, flashover and discharging phenomena during and after electron-irradiation are studied. The experimental results are then analyzed. In particular, the divergence between the experimental data and those predicted by the total electron emission yield approach (TEEYA) is discussed. A partial discharge was observed immediately after the end of the electron-irradiation exposure. The experimental data suggests, that the discharge is due to the evacuation to the ground, along the insulator surface, of released electrons from shallow traps at (or in the close vicinity of) the insulat...

  2. Methodology of investigation of the effect of ultrasonic oscillations on mechanical properties of structural materials in a wide range of temperatures and strain rates

    International Nuclear Information System (INIS)

    Bakay, S.O.; Gurin, V.A.; Gurin, I.V.; Neklyudov, I.M.; Gorbatenko, V.M.; Netesov, V.M.; Dub, S.N.

    2007-01-01

    The present message is devoted to the description of a method of research of influence of ultrasound on physicomechanical properties of constructional materials during plastic deformation in vacuum. The functional diagram and the description of created experimental facility which allows to carry out researches by this method is resulted. The created method and the equipment it has been approved for studying influence of ultrasound on physicomechanical properties of carbon composite materials of nuclear industry. Mechanical properties of carbon - carbon composite materials are investigated in a range of temperatures from room up to 600 degree C, at various strain rates, in conditions of ultrasonic vibrations and without them. The analysis of results received is carried out at use of a method of mechanical tests of samples of carbon before ultrasonic processing on nanohardness. The comparative estimation of the received experimental data is resulted

  3. Importance of methodology on (99m)technetium dimercapto-succinic acid scintigraphic image quality: imaging pilot study for RIVUR (Randomized Intervention for Children With Vesicoureteral Reflux) multicenter investigation.

    Science.gov (United States)

    Ziessman, Harvey A; Majd, Massoud

    2009-07-01

    We reviewed our experience with (99m)technetium dimercapto-succinic acid scintigraphy obtained during an imaging pilot study for a multicenter investigation (Randomized Intervention for Children With Vesicoureteral Reflux) of the effectiveness of daily antimicrobial prophylaxis for preventing recurrent urinary tract infection and renal scarring. We analyzed imaging methodology and its relation to diagnostic image quality. (99m)Technetium dimercapto-succinic acid imaging guidelines were provided to participating sites. High-resolution planar imaging with parallel hole or pinhole collimation was required. Two core reviewers evaluated all submitted images. Analysis included appropriate views, presence or lack of patient motion, adequate magnification, sufficient counts and diagnostic image quality. Inter-reader agreement was evaluated. We evaluated 70, (99m)technetium dimercapto-succinic acid studies from 14 institutions. Variability was noted in methodology and image quality. Correlation (r value) between dose administered and patient age was 0.780. For parallel hole collimator imaging good correlation was noted between activity administered and counts (r = 0.800). For pinhole imaging the correlation was poor (r = 0.110). A total of 10 studies (17%) were rejected for quality issues of motion, kidney overlap, inadequate magnification, inadequate counts and poor quality images. The submitting institution was informed and provided with recommendations for improving quality, and resubmission of another study was required. Only 4 studies (6%) were judged differently by the 2 reviewers, and the differences were minor. Methodology and image quality for (99m)technetium dimercapto-succinic acid scintigraphy varied more than expected between institutions. The most common reason for poor image quality was inadequate count acquisition with insufficient attention to the tradeoff between administered dose, length of image acquisition, start time of imaging and resulting image

  4. Enhancement of the methodology of repository design and post-closure performance assessment for preliminary investigation stage. Progress report on NUMO-JAEA collaborative research in FY2011 (Joint research)

    International Nuclear Information System (INIS)

    Shibata, Masahiro; Sawada, Atsushi; Tachi, Yukio; Makino, Hitoshi; Hayano, Akira; Mitsui, Seiichiro; Taniguchi, Naoki; Oda, Chie; Kitamura, Akira; Osawa, Hideaki; Semba, Takeshi; Hioki, Kazumasa; Kamei, Gento; Ebashi, Takeshi; Kubota, Shigeru; Kurosawa, Susumu; Goto, Junichi; Goto, Takahiro; Ishii, Eiichi; Inagaki, Manabu; Moriya, Toshifumi; Suzuki, Satoru; Ohi, Takao; Ichihara, Takayuki; Ishida, Keisuke; Ishiguro, Katsuhiko; Tsuchi, Hiroyuki

    2012-09-01

    JAEA and NUMO have conducted a collaborative research work which is designed to enhance the methodology of repository design and performance assessment in preliminary investigation stage. The topics of such joint research are (1) study on selection of host rock, (2) study on development of scenario, (3) study on setting nuclide migration parameters, (4) study on ensuring quality of knowledge. With regard to (1), in terms of hydraulic properties, items for assessing rock property, and assessment methodology of groundwater travel time has been organized with interaction from site investigation. With regard to (2), the existing approach has been embodied, in addition, the phenomenological understanding regarding dissolution of and nuclide release from vitrified waste, corrosion of the overpack, long-term performance of the buffer are summarized. With regard to (3), the approach for parameter setting has been improved for sorption and diffusion coefficient of buffer/rock, and applied and tested for parameter setting of key radionuclides. With regard to (4), framework for ensuring quality of knowledge has been studied and examined aimed at the likely disposal facility condition. (author)

  5. RETRACTED: Investigation of plasmonic studies on morphology of deposited silver thin films having different thicknesses by soft computing methodologies-A comparative study

    Science.gov (United States)

    Zakaria, Rozalina; Noh, Siti Munirah Che; Petković, Dalibor; Shamshirband, Shahaboddin; Penny, Richard

    2014-09-01

    This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Editor. After a thorough investigation, the Editor has concluded that the acceptance of this article was based upon the positive advice of at least one faked reviewer report. The report was submitted from a fictitious email account which was provided to the journal as a suggested reviewer by the corresponding author during the submission of the paper. This manipulation of the peer-review process represents a clear violation of the fundamentals of peer review, our publishing policies, and publishing ethics standards. Apologies are offered to the readers of the journal that this deception was not detected during the submission process. Section 3 of the article plagiarizes part of the text that appeared in the article published by R. Maity et al in Hydrological Processes 24 (2010) 917-923, http://dx.doi.org/10.1002/hyp.7535. The article also duplicates parts of the articles previously published by the authors in the Journal of the Optical Society of America A 31 (2014) 1023-1030, http://dx.doi.org/10.1364/JOSAA.31.001023, Infrared Physics & Technology 65 (2014) 94-102, http://dx.doi.org/10.1016/j.infrared.2014.04.005 and Plasmonics 9 (2014) 1189-1196, http://dx.doi.org/10.1007/s11468-014-9730-3.

  6. SAPO-34/AlMCM-41, as a novel hierarchical nanocomposite: preparation, characterization and investigation of synthesis factors using response surface methodology

    Science.gov (United States)

    Roohollahi, Hossein; Halladj, Rouein; Askari, Sima; Yaripour, Fereydoon

    2018-06-01

    SAPO-34/AlMCM-41, as a new hierarchical nanocomposite was successfully synthesized via hydrothermal and dry-gel conversion. In an experimental and statistical study, effect of five input parameters including synthesis period, drying temperature, NaOH/Si, water/dried-gel and SAPO% were investigated on range-order degree of mesochannels and the relative crystallinity. X-ray diffraction (XRD) patterns were recorded to characterize the ordered AlMCM-41 and crystalline SAPO-34 structures. Nitrogen adsorption-desorption technique, scanning electron microscopy (SEM), field-emission SEM (FESEM) equipped with an energy-dispersive X-ray spectroscopy (EDS-Map) and transmission electron microscopy (TEM) were used to study the textural properties, morphology and surface elemental composition. Two reduced polynomials were fitted to the responses with good precision. Further, based on analysis of variances, SAPO% and time duration of dry-gel conversion were observed as the most effective parameters on the composite structure. The hierarchical porosity, narrow pore size distribution, high external surface area and large specific pore volume were of interesting characteristics for this novel nanocomposite.

  7. Response surface methodology investigation into optimization of the removal condition and mechanism of Cr(Ⅵ) by Na2SO3/CaO.

    Science.gov (United States)

    Zhao, Shengxin; Chen, Zhonglin; Shen, Jimin; Kang, Jing; Qu, Yanfeng; Wang, Binyuan; Wang, Xin; Yuan, Lie

    2017-11-01

    The removal of Cr(Ⅵ) by chemical reduction-precipitation is widely applied in wastewater treatment plants. Nevertheless, the formation of Cr(OH) 3 with gel properties has weak settlement performance, making it necessary to add a coagulant aid to reduce the settling time and improve the settling effect. In this investigation, a high concentration of Cr(Ⅵ) was removed using Na 2 SO 3 as a reducing agent and CaO as a coagulant. An improved reduction and precipitation experiment was modeled by applying a three-factor central composite experimental design (CCD). To reveal as many mechanisms as possible for Cr T removal, other verification experiments were performed. The Cr T removal efficiency decreased, which can be explained by the following three reasons: dissolution of Cr(Ⅲ), competition for adsorption between Ca 2+ and Cr(Ⅲ) at different coagulation times, and formation of a solubility complex with Cr(Ⅲ) due to the surplus SO 3 2- in solution. The increasing Cr T removal efficiency can be explained by the following two reasons: dissolved Ca 2+ from CaO can neutralize CrO 2 - that is produced by the dissolution of Cr(OH) 3 in alkaline solution and can broaden the optimal final pH range of coagulation. Ca 2+ could also strengthen the Cr T removal through adsorption bridging and co-precipitation with CaO as the core of flocs. Copyright © 2017 Elsevier Ltd. All rights reserved.

  8. Comparison of Uriswab to alternative methods for urine culture collection and transport: confirmation of standard culture methodology for investigation of urinary tract infections.

    Science.gov (United States)

    Rennie, Robert P; Turnbull, Lee-Ann; Gauchier-Pitts, Kaylee; Bennett, Tracy; Dyrland, Debbie; Blonski, Susan

    2016-08-01

    The ability to isolate and identify causative agents of urinary tract infections relies primarily on the quality of the urine sample that is submitted to the microbiology. The most important factors are the method of collection, the maintenance of viability of the potential pathogens during transport, and standardization of the culturing of the urine sample. This report is a composite of several investigations comparing collection and transport on urine culture paddles, with a preservative urine sponge (Uriswab), and a comparison of Uriswab with the BD preservative transport tube as methods of preservation of urinary pathogens. Primary studies showed that Uriswab maintained significantly more urinary pathogens than the urine culture paddle with fewer mixed or contaminated cultures. The two preservative transport systems were comparable for maintenance of viability of the pathogens, but there were fewer mixed cultures when samples were collected with Uriswab. This study confirms the importance of a standard volume of 1 μL of urine for culture. Copyright © 2016 Elsevier Inc. All rights reserved.

  9. Rapid quantification of imidazolium-based ionic liquids by hydrophilic interaction liquid chromatography: Methodology and an investigation of the retention mechanisms.

    Science.gov (United States)

    Hawkins, Cory A; Rud, Anna; Guthrie, Margaret L; Dietz, Mark L

    2015-06-26

    The separation of nine N,N'-dialkylimidazolium-based ionic liquids (ILs) by an isocratic hydrophilic interaction high-performance liquid chromatographic method using an unmodified silica column was investigated. The chosen analytical conditions using a 90:10 acetonitrile-ammonium formate buffer mobile phase on a high-purity, unmodified silica column were found to be efficient, robust, and sensitive for the determination of ILs in a variety of solutions. The retention window (k' = 2-11) was narrower than that of previous methods, resulting in a 7-min runtime for the nine IL homologues. The lower limit of quantification of the method, 2-3 μmol L(-1), was significantly lower than those reported previously for HPLC-UV methods. The effects of systematically modifying the IL cation alkyl chain length, column temperature, and mobile-phase water and buffer content on solute retention were examined. Cation exchange was identified as the dominant retention mechanism for most of the solutes, with a distinct (single methylene group) transition to a dominant partitioning mode at the highest solute polarity. Copyright © 2015 Elsevier B.V. All rights reserved.

  10. A new methodology of experimental investigations of the generalized matrix effect. Part 4. The influence of anions on the spectrophotometric determination of zinc and cadmium with 1-(2-pyridylazo)-2-naphthol

    International Nuclear Information System (INIS)

    Plesinska, M.; Rokosz, A.

    1981-01-01

    Using the methodology of investigation of the so called matrix effect the interferences in the extraction-spectrophotometric determination of zinc and cadmium with the PAN reagent caused by thiocyanates, iodides and sulphates have been evaluated. Basing on the results of the determinations made on the standard solutions, which compositions were defined by the composite rotatable design for the three factors (concentrations of: KSCN, KJ and K 2 SO 4 ), the polynomial models of absorbance of the chloroform phase as the function of the concentrations of the accompanying salts have been formulated. The results of earlier monofactorial investigations of the influence of the salts tested on the determination of zinc and cadmium have been confirmed. Besides, for the first time the significant second order effects including interactions between different anions have been observed. (author)

  11. Investigación de Trichomonas vaginalis durante el embarazo mediante diferentes metodologías Investigation of Trichomonas vaginalis through different methodologies during pregnancy

    Directory of Open Access Journals (Sweden)

    B. Perazzi

    2007-06-01

    Full Text Available Los objetivos del trabajo fueron conocer la prevalencia de tricomonosis en pacientes embarazadas y evaluar la utilidad de diferentes metodologías para su diagnóstico. Se estudiaron prospectivamente 223 mujeres embarazadas. Trichomonas vaginalis se investigó utilizando distintos exámenes microscópicos, cultivo en medio sólido y medio líquido. Se evaluó la sensibilidad y especificidad de la microscopía considerando a los cultivos en ambos medios como método de referencia. La prevalencia del parásito obtenida por cultivo (medio líquido más medio sólido fue de 4,5% (10/223 siendo la detección por examen en fresco, coloración de May-Grunwald Giemsa, fresco con solución acética formolada (SAF/azul de metileno y por cultivo en medio sólido y líquido de 1,3%, 1,8%, 1,8% y 4,5% respectivamente. La sensibilidad del examen en fresco fue 30%, para el May-Grunwald Giemsa y el SAF/azul de metileno fue 40%. Utilizando conjuntamente los tres exámenes microscópicos, la sensibilidad se elevó al 50% y la especificidad fue 100% para todos los exámenes microscópicos. El cultivo en medio líquido detectó el 100% de los casos positivos , mientras que el medio sólido sólo el 50%. Por la baja sensibilidad de la microscopía para T. vaginalis, en embarazadas asintomáticas recomendamos la utilización del cultivo en medio líquido durante el embarazo, para instaurar un tratamiento precoz.The aim of this study was to conduct a survey regarding the prevalence of trichomoniasis in pregnant patients and to evaluate the utility of different diagnostic methods. Two hundred and twenty three vaginal swab specimens from pregnant women were prospectively examined. Trichomonas vaginalis was investigated by various microscopic examinations, solid culture medium and liquid culture medium. The sensitivity and specificity of microscopy were evaluated by considering both culture media as the "gold standards". The prevalence of T. vaginalis obtained by both

  12. A methodology to design heuristics for model selection based on the characteristics of data: Application to investigate when the Negative Binomial Lindley (NB-L) is preferred over the Negative Binomial (NB).

    Science.gov (United States)

    Shirazi, Mohammadali; Dhavala, Soma Sekhar; Lord, Dominique; Geedipally, Srinivas Reddy

    2017-10-01

    Safety analysts usually use post-modeling methods, such as the Goodness-of-Fit statistics or the Likelihood Ratio Test, to decide between two or more competitive distributions or models. Such metrics require all competitive distributions to be fitted to the data before any comparisons can be accomplished. Given the continuous growth in introducing new statistical distributions, choosing the best one using such post-modeling methods is not a trivial task, in addition to all theoretical or numerical issues the analyst may face during the analysis. Furthermore, and most importantly, these measures or tests do not provide any intuitions into why a specific distribution (or model) is preferred over another (Goodness-of-Logic). This paper ponders into these issues by proposing a methodology to design heuristics for Model Selection based on the characteristics of data, in terms of descriptive summary statistics, before fitting the models. The proposed methodology employs two analytic tools: (1) Monte-Carlo Simulations and (2) Machine Learning Classifiers, to design easy heuristics to predict the label of the 'most-likely-true' distribution for analyzing data. The proposed methodology was applied to investigate when the recently introduced Negative Binomial Lindley (NB-L) distribution is preferred over the Negative Binomial (NB) distribution. Heuristics were designed to select the 'most-likely-true' distribution between these two distributions, given a set of prescribed summary statistics of data. The proposed heuristics were successfully compared against classical tests for several real or observed datasets. Not only they are easy to use and do not need any post-modeling inputs, but also, using these heuristics, the analyst can attain useful information about why the NB-L is preferred over the NB - or vice versa- when modeling data. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. BitTorrent Sync: Network Investigation Methodology

    OpenAIRE

    Scanlon, Mark; Farina, Jason; Kechadi, M-Tahar

    2014-01-01

    The volume of personal information and data most Internet users find themselves amassing is ever increasing and the fast pace of the modern world results in most requiring instant access to their files. Millions of these users turn to cloud based file synchronisation services, such as Dropbox, Microsoft Skydrive, Apple iCloud and Google Drive, to enable 'always-on' access to their most up-to-date data from any computer or mobile device with an Internet connection. The prevalence of recent art...

  14. Methodology Investigation Automatic Magnetic Recording Borescope.

    Science.gov (United States)

    1986-01-01

    or other brushless signal coupling devices to the extent possible and feasible to reduce or eliminate the need for slip ring and brush type signal...the inspection head, is used to magnetically couple the necessary energy across the rotary interface. Because there is (1) an appreciable air gap in...were written. (2) As required by the contract, the signal conditioners in the MB employ automatic gain control to compensate for the changes in

  15. [MR spectroscopy of amygdala: investigation of methodology].

    Science.gov (United States)

    Tang, Hehan; Yue, Qiang; Gong, Qiyong

    2013-08-01

    This study was aimed to optimize the methods of magnetic resonance spectroscopy (MRS) to improve its quality in amygdala. Forty-three volunteers were examined at right and left amygdala using stimulated-echo acquisition mode (STEAM), and point-resolved spectroscopy series (PRESS) with and without saturation bands. The Cr-SNR, water-suppression level, water full width at half maximum (FWHM) and RMS noise of three sequences were compared. The results showed that (1) the Cr-SNR and water-suppression lelvel of PRESS with saturation bands were better than that of PRESS without saturation bands and STEAM (P<0.001); (2) the left and right RMS noise was significantly different both using PRESS with saturation bands and using STEAM (P<0.05); (3) there was a positive, significant correlation between Cr-SNR and voxel size (P<0.05). Therefore, PRESS with saturation bands is better than PRESS without saturation bands or STEAM for the spectroscopy of amygdala. It is also useful to make the voxel as big as possible to improve the spectral quality.

  16. Soil Radiological Characterisation Methodology

    International Nuclear Information System (INIS)

    Attiogbe, Julien; Aubonnet, Emilie; De Maquille, Laurence; De Moura, Patrick; Desnoyers, Yvon; Dubot, Didier; Feret, Bruno; Fichet, Pascal; Granier, Guy; Iooss, Bertrand; Nokhamzon, Jean-Guy; Ollivier Dehaye, Catherine; Pillette-Cousin, Lucien; Savary, Alain

    2014-12-01

    This report presents the general methodology and best practice approaches which combine proven existing techniques for sampling and characterisation to assess the contamination of soils prior to remediation. It is based on feedback of projects conducted by main French nuclear stakeholders involved in the field of remediation and dismantling (EDF, CEA, AREVA and IRSN). The application of this methodology will enable the project managers to obtain the elements necessary for the drawing up of files associated with remediation operations, as required by the regulatory authorities. It is applicable to each of the steps necessary for the piloting of remediation work-sites, depending on the objectives targeted (release into the public domain, re-use, etc.). The main part describes the applied statistical methodology with the exploratory analysis and variogram data, identification of singular points and their location. The results obtained permit assessment of a mapping to identify the contaminated surface and subsurface areas. It stakes the way for radiological site characterisation since the initial investigations from historical and functional analysis to check that the remediation objectives have been met. It follows an example application from the feedback of the remediation of a contaminated site on the Fontenay aux Roses facility. It is supplemented by a glossary of main terms used in the field from different publications or international standards. This technical report is a support of the ISO Standard ISO ISO/TC 85/SC 5 N 18557 'Sampling and characterisation principles for soils, buildings and infrastructures contaminated by radionuclides for remediation purposes'. (authors) [fr

  17. Clinical trial methodology

    National Research Council Canada - National Science Library

    Peace, Karl E; Chen, Ding-Geng

    2011-01-01

    ... in the pharmaceutical industry, Clinical trial methodology emphasizes the importance of statistical thinking in clinical research and presents the methodology as a key component of clinical research...

  18. Investigação de áreas de risco como metodologia complementar ao controle da leishmaniose visceral canina Investigation of risk areas as complemental methodology for the control of canine visceral leishmaniasis

    Directory of Open Access Journals (Sweden)

    Fred S. Julião

    2007-08-01

    Full Text Available Foram investigadas áreas de risco de leishmaniose visceral canina no município de Camaçari, Bahia. Um total de 278 cães distribuídos em 141 residências, pertencentes a 20 áreas de risco investigadas, foi examinado sorologicamente (ELISA. A soroprevalência geral foi 21,7% (56/258 depois da exclusão dos 20 cães usados no início do estudo para delimitar a área. Os resultados respectivos das análises univariada e multivariada dos fatores relacionados à infecção do cão por Leishmania chagasi, a captura e distribuição do vetor na área e a metodologia usada para localizar os focos caninos são discutidos.Risk areas of canine visceral leishmaniasis in the city of Camaçari, Bahia, Brazil, were investigated. A total of 278 dogs from 141 homes pertaining to 20 investigated risk areas was serologically screened (ELISA. The general seroprevalence was 21.7% (56/258 after exclusion of 20 dogs used at the beginning of the survey to limit the study area. The respective results of the univariated and multivariated analysis of factors related to infection of dogs by Leishmania chagasi, to vector distribu-tion pattern in the area and to the methodology used to localize the canine focuses are discussed.

  19. GENESIS OF METHODOLOGY OF MANAGEMENT BY DEVELOPMENT OF ORGANIZATIONS

    Directory of Open Access Journals (Sweden)

    Z.N. Varlamova

    2007-06-01

    Full Text Available In clause the genesis of methodology of management of development of organizations as sets of the used methodological approaches and methods is investigated. The results of the comparative analysis of the methodological approaches to management of organizational development are submitted. The traditional methodological approaches are complemented strategic experiment and methodology case studies. The approaches to formation of new methodology and technique of research of sources of competitive advantages of organization are considered.

  20. Investigation of land subsidence due to climate changes in surrounding areas of Urmia Lake (located in northwest of Iran) using wavelet coherence analysis of geodetic measurements and methodological data

    Science.gov (United States)

    Moghtased-Azar, K.; Mirzaei, A.; Nankali, H. R.; Tavakoli, F.

    2012-04-01

    Urmia Lake (salt lake in northwest of Iran) plays a valuable role in environment, wildlife and economy of Iran and the region, and now faces great challenges for survival. The Lake is in immediate and great danger and rapidly going to become salty desert. During the recent years and new heat wave, Iran, like many other countries are experiencing, is faced with relativity reduced rain fall. From a few years ago environment activists warned about potential dangers. Geodetic measurements, e.g., repeated leveling measurements of first order leveling network of Iran and continuous GPS measurements of Iranian Permanent GPS network of Iran (IPGN) showed that there is subsidence in surrounding areas of the lake. This paper investigates the relation between subsidence and climate changing in the area, using the wavelet coherence of the data of permanent GPS stations and daily methodological data. The results show that there is strong coherence between the subsidence phenomena induced by GPS data and climate warming from January 2009 up to end of August 2009. However, relative lake height variations computed from altimetry observations (TOPEX/POSEIDON (T/P), Jason-1 and Jason-2/OSTM) confirms maximum evaporation rates of the lake in this period.

  1. Enhancement of the methodology of repository design and post-closure performance assessment for preliminary investigation stage (3). Progress report on NUMO-JAEA collaborative research in FY2013 (Joint research)

    International Nuclear Information System (INIS)

    Shibata, Masahiro; Sawada, Atsushi; Tachi, Yukio; Makino, Hitoshi; Wakasugi, Keiichiro; Mitsui, Seiichiro; Kitamura, Akira; Oda, Chie; Ishidera, Takamitsu; Suyama, Tadahiro; Hatanaka, Koichiro; Kamei, Gento; Yoshikawa, Hideki; Senba, Takeshi; Seo, Toshihiro; Kurosawa, Susumu; Goto, Junichi; Shibutani, Sanae; Goto, Takahiro; Kubota, Shigeru; Inagaki, Manabu; Moriya, Toshifumi; Suzuki, Satoru; Ishida, Keisuke; Nishio, Hikaru; Makiuchi, Akie; Fujihara, Hiroshi

    2015-03-01

    JAEA and NUMO have conducted a collaborative research work which is designed to enhance the methodology of repository design and post-closure performance assessment in preliminary investigation stage. With regard to (1) study on host rock suitability in terms of hydrology, based on some examples of developing method of hydro-geological structure model, acquired knowledge are arranged using the tree diagram, and model uncertainty and its influence on the evaluation items were discussed. With regard to (2) study on scenario development, the developed approach for “defining conditions” has been reevaluated and improved from practical viewpoints. In addition, the uncertainty evaluation for the effect of use of cementitious material, as well as glass dissolution model, was conducted with analytical evaluation. With regard to (3) study on setting radionuclide migration parameters, based on survey of precedent procedures, multiple-approach for distribution coefficient of rocks was established, and the adequacy of the approach was confirmed through its application to sedimentary rock and granitic rock. Besides, an approach for solubility setting was developed including the procedure of selection of solubility limiting solid phase. The adequacy of the approach was confirmed through its application to key radionuclides. (author)

  2. Impact of missing attenuation and scatter corrections on 99m Tc-MAA SPECT 3D dosimetry for liver radioembolization using the patient relative calibration methodology: A retrospective investigation on clinical images.

    Science.gov (United States)

    Botta, Francesca; Ferrari, Mahila; Chiesa, Carlo; Vitali, Sara; Guerriero, Francesco; Nile, Maria Chiara De; Mira, Marta; Lorenzon, Leda; Pacilio, Massimiliano; Cremonesi, Marta

    2018-04-01

    To investigate the clinical implication of performing pre-treatment dosimetry for 90 Y-microspheres liver radioembolization on 99m Tc-MAA SPECT images reconstructed without attenuation or scatter correction and quantified with the patient relative calibration methodology. Twenty-five patients treated with SIR-Spheres ® at Istituto Europeo di Oncologia and 31 patients treated with TheraSphere ® at Istituto Nazionale Tumori were considered. For each acquired 99m Tc-MAA SPECT, four reconstructions were performed: with attenuation and scatter correction (AC_SC), only attenuation (AC_NoSC), only scatter (NoAC_SC) and without corrections (NoAC_NoSC). Absorbed dose maps were calculated from the activity maps, quantified applying the patient relative calibration to the SPECT images. Whole Liver (WL) and Tumor (T) regions were drawn on CT images. Injected Liver (IL) region was defined including the voxels receiving absorbed dose >3.8 Gy/GBq. Whole Healthy Liver (WHL) and Healthy Injected Liver (HIL) regions were obtained as WHL = WL - T and HIL = IL - T. Average absorbed dose to WHL and HIL were calculated, and the injection activity was derived following each Institute's procedure. The values obtained from AC_NoSC, NoAC_SC and NoAC_NoSC images were compared to the reference value suggested by AC_SC images using Bland-Altman analysis and Wilcoxon paired test (5% significance threshold). Absorbed-dose maps were compared to the reference map (AC_SC) in global terms using the Voxel Normalized Mean Square Error (%VNMSE), and at voxel level by calculating for each voxel the normalized difference with the reference value. The uncertainty affecting absorbed dose at voxel level was accounted for in the comparison; to this purpose, the voxel counts fluctuation due to Poisson and reconstruction noise was estimated from SPECT images of a water phantom acquired and reconstructed as patient images. NoAC_SC images lead to activity prescriptions not significantly different from the

  3. Qualitative Methodology in Unfamiliar Cultures

    DEFF Research Database (Denmark)

    Svensson, Christian Franklin

    2014-01-01

    on a qualitative methodology, conscious reflection on research design and objectivity is important when doing fieldwork. This case study discusses such reflections. Emphasis throughout is given to applied qualitative methodology and its contributions to the social sciences, in particular having to do......This case study discusses qualitative fieldwork in Malaysia. The trends in higher education led to investigating how and why young Indians and Chinese in Malaysia are using the university to pursue a life strategy. Given the importance of field context in designing and analysing research based...

  4. Scenario development methodologies

    International Nuclear Information System (INIS)

    Eng, T.; Hudson, J.; Stephansson, O.

    1994-11-01

    In the period 1981-1994, SKB has studied several methodologies to systematize and visualize all the features, events and processes (FEPs) that can influence a repository for radioactive waste in the future. All the work performed is based on the terminology and basic findings in the joint SKI/SKB work on scenario development presented in the SKB Technical Report 89-35. The methodologies studied are a) Event tree analysis, b) Influence diagrams and c) Rock Engineering Systems (RES) matrices. Each one of the methodologies is explained in this report as well as examples of applications. One chapter is devoted to a comparison between the two most promising methodologies, namely: Influence diagrams and the RES methodology. In conclusion a combination of parts of the Influence diagram and the RES methodology is likely to be a promising approach. 26 refs

  5. Reliability Centered Maintenance - Methodologies

    Science.gov (United States)

    Kammerer, Catherine C.

    2009-01-01

    Journal article about Reliability Centered Maintenance (RCM) methodologies used by United Space Alliance, LLC (USA) in support of the Space Shuttle Program at Kennedy Space Center. The USA Reliability Centered Maintenance program differs from traditional RCM programs because various methodologies are utilized to take advantage of their respective strengths for each application. Based on operational experience, USA has customized the traditional RCM methodology into a streamlined lean logic path and has implemented the use of statistical tools to drive the process. USA RCM has integrated many of the L6S tools into both RCM methodologies. The tools utilized in the Measure, Analyze, and Improve phases of a Lean Six Sigma project lend themselves to application in the RCM process. All USA RCM methodologies meet the requirements defined in SAE JA 1011, Evaluation Criteria for Reliability-Centered Maintenance (RCM) Processes. The proposed article explores these methodologies.

  6. Introduction to LCA Methodology

    DEFF Research Database (Denmark)

    Hauschild, Michael Z.

    2018-01-01

    In order to offer the reader an overview of the LCA methodology in the preparation of the more detailed description of its different phases, a brief introduction is given to the methodological framework according to the ISO 14040 standard and the main elements of each of its phases. Emphasis...

  7. Methodologies, languages and tools

    International Nuclear Information System (INIS)

    Amako, Katsuya

    1994-01-01

    This is a summary of the open-quotes Methodologies, Languages and Toolsclose quotes session in the CHEP'94 conference. All the contributions to methodologies and languages are relevant to the object-oriented approach. Other topics presented are related to various software tools in the down-sized computing environment

  8. Archetype modeling methodology.

    Science.gov (United States)

    Moner, David; Maldonado, José Alberto; Robles, Montserrat

    2018-03-01

    Clinical Information Models (CIMs) expressed as archetypes play an essential role in the design and development of current Electronic Health Record (EHR) information structures. Although there exist many experiences about using archetypes in the literature, a comprehensive and formal methodology for archetype modeling does not exist. Having a modeling methodology is essential to develop quality archetypes, in order to guide the development of EHR systems and to allow the semantic interoperability of health data. In this work, an archetype modeling methodology is proposed. This paper describes its phases, the inputs and outputs of each phase, and the involved participants and tools. It also includes the description of the possible strategies to organize the modeling process. The proposed methodology is inspired by existing best practices of CIMs, software and ontology development. The methodology has been applied and evaluated in regional and national EHR projects. The application of the methodology provided useful feedback and improvements, and confirmed its advantages. The conclusion of this work is that having a formal methodology for archetype development facilitates the definition and adoption of interoperable archetypes, improves their quality, and facilitates their reuse among different information systems and EHR projects. Moreover, the proposed methodology can be also a reference for CIMs development using any other formalism. Copyright © 2018 Elsevier Inc. All rights reserved.

  9. Menopause and Methodological Doubt

    Science.gov (United States)

    Spence, Sheila

    2005-01-01

    Menopause and methodological doubt begins by making a tongue-in-cheek comparison between Descartes' methodological doubt and the self-doubt that can arise around menopause. A hermeneutic approach is taken in which Cartesian dualism and its implications for the way women are viewed in society are examined, both through the experiences of women…

  10. VEM: Virtual Enterprise Methodology

    DEFF Research Database (Denmark)

    Tølle, Martin; Vesterager, Johan

    2003-01-01

    This chapter presents a virtual enterprise methodology (VEM) that outlines activities to consider when setting up and managing virtual enterprises (VEs). As a methodology the VEM helps companies to ask the right questions when preparing for and setting up an enterprise network, which works...

  11. Data Centric Development Methodology

    Science.gov (United States)

    Khoury, Fadi E.

    2012-01-01

    Data centric applications, an important effort of software development in large organizations, have been mostly adopting a software methodology, such as a waterfall or Rational Unified Process, as the framework for its development. These methodologies could work on structural, procedural, or object oriented based applications, but fails to capture…

  12. The Methodology of Magpies

    Science.gov (United States)

    Carter, Susan

    2014-01-01

    Arts/Humanities researchers frequently do not explain methodology overtly; instead, they "perform" it through their use of language, textual and historic cross-reference, and theory. Here, methodologies from literary studies are shown to add to Higher Education (HE) an exegetical and critically pluralist approach. This includes…

  13. Engineering radioecology: Methodological considerations

    International Nuclear Information System (INIS)

    Nechaev, A.F.; Projaev, V.V.; Sobolev, I.A.; Dmitriev, S.A.

    1995-01-01

    The term ''radioecology'' has been widely recognized in scientific and technical societies. At the same time, this scientific school (radioecology) does not have a precise/generally acknowledged structure, unified methodical basis, fixed subjects of investigation, etc. In other words, radioecology is a vast, important but rather amorphous conglomerate of various ideas, amalgamated mostly by their involvement in biospheric effects of ionizing radiation and some conceptual stereotypes. This paradox was acceptable up to a certain time. However, with the termination of the Cold War and because of remarkable political changes in the world, it has become possible to convert the problem of environmental restoration from the scientific sphere in particularly practical terms. Already the first steps clearly showed an imperfection of existing technologies, managerial and regulatory schemes; lack of qualified specialists, relevant methods and techniques; uncertainties in methodology of decision-making, etc. Thus, building up (or maybe, structuring) of special scientific and technological basis, which the authors call ''engineering radioecology'', seems to be an important task. In this paper they endeavored to substantiate the last thesis and to suggest some preliminary ideas concerning the subject matter of engineering radioecology

  14. METHODOLOGICAL ELEMENTS OF SITUATIONAL ANALYSIS

    Directory of Open Access Journals (Sweden)

    Tetyana KOVALCHUK

    2016-07-01

    Full Text Available The article deals with the investigation of theoretical and methodological principles of situational analysis. The necessity of situational analysis is proved in modern conditions. The notion “situational analysis” is determined. We have concluded that situational analysis is a continuous system study which purpose is to identify dangerous situation signs, to evaluate comprehensively such signs influenced by a system of objective and subjective factors, to search for motivated targeted actions used to eliminate adverse effects of the exposure of the system to the situation now and in the future and to develop the managerial actions needed to bring the system back to norm. It is developed a methodological approach to the situational analysis, its goal is substantiated, proved the expediency of diagnostic, evaluative and searching functions in the process of situational analysis. The basic methodological elements of the situational analysis are grounded. The substantiation of the principal methodological elements of system analysis will enable the analyst to develop adaptive methods able to take into account the peculiar features of a unique object which is a situation that has emerged in a complex system, to diagnose such situation and subject it to system and in-depth analysis, to identify risks opportunities, to make timely management decisions as required by a particular period.

  15. Design Methodology - Design Synthesis

    DEFF Research Database (Denmark)

    Andreasen, Mogens Myrup

    2003-01-01

    Design Methodology is part of our practice and our knowledge about designing, and it has been strongly supported by the establishing and work of a design research community. The aim of this article is to broaden the reader¿s view of designing and Design Methodology. This is done by sketching...... the development of Design Methodology through time and sketching some important approaches and methods. The development is mainly forced by changing industrial condition, by the growth of IT support for designing, but also by the growth of insight into designing created by design researchers.......ABSTRACT Design Methodology shall be seen as our understanding of how to design; it is an early (emerging late 60ies) and original articulation of teachable and learnable methodics. The insight is based upon two sources: the nature of the designed artefacts and the nature of human designing. Today...

  16. GPS system simulation methodology

    Science.gov (United States)

    Ewing, Thomas F.

    1993-01-01

    The following topics are presented: background; Global Positioning System (GPS) methodology overview; the graphical user interface (GUI); current models; application to space nuclear power/propulsion; and interfacing requirements. The discussion is presented in vugraph form.

  17. Hazard classification methodology

    International Nuclear Information System (INIS)

    Brereton, S.J.

    1996-01-01

    This document outlines the hazard classification methodology used to determine the hazard classification of the NIF LTAB, OAB, and the support facilities on the basis of radionuclides and chemicals. The hazard classification determines the safety analysis requirements for a facility

  18. Clinical trial methodology

    National Research Council Canada - National Science Library

    Peace, Karl E; Chen, Ding-Geng

    2011-01-01

    "Now viewed as its own scientific discipline, clinical trial methodology encompasses the methods required for the protection of participants in a clinical trial and the methods necessary to provide...

  19. The Defense Science Board Permanent Task Force on Nuclear Weapons Surety. Report on the Unauthorized Movement of Nuclear Weapons

    National Research Council Canada - National Science Library

    Welch, Larry D; Agnew, Harold M; Bien, Lyle G; Crawford, John C; Foster, Jr., John S; Gold, Sydell P; McCarthy, James P; Mies, Richard W; Neary, Thomas H; Selden, Robert L

    2008-01-01

    ...]) and the Commander, U.S. Strategic Command to conduct an independent investigation of the unauthorized transfer of nuclear warheads between Minot Air Force Base, North Dakota, and Barksdale Air Force Base, Louisiana on 30 August 2007...

  20. Methodology of sustainability accounting

    Directory of Open Access Journals (Sweden)

    O.H. Sokil

    2017-03-01

    Full Text Available Modern challenges of the theory and methodology of accounting are realized through the formation and implementation of new concepts, the purpose of which is to meet the needs of users in standard and unique information. The development of a methodology for sustainability accounting is a key aspect of the management of an economic entity. The purpose of the article is to form the methodological bases of accounting for sustainable development and determine its goals, objectives, object, subject, methods, functions and key aspects. The author analyzes the theoretical bases of the definition and considers the components of the traditional accounting methodology. Generalized structural diagram of the methodology for accounting for sustainable development is offered in the article. The complex of methods and principles of sustainable development accounting for systematized and non-standard provisions has been systematized. The new system of theoretical and methodological provisions of accounting for sustainable development is justified in the context of determining its purpose, objective, subject, object, methods, functions and key aspects.

  1. Which Methodology Works Better? English Language Teachers' Awareness of the Innovative Language Learning Methodologies

    Science.gov (United States)

    Kurt, Mustafa

    2015-01-01

    The present study investigated whether English language teachers were aware of the innovative language learning methodologies in language learning, how they made use of these methodologies and the learners' reactions to them. The descriptive survey method was employed to disclose the frequencies and percentages of 175 English language teachers'…

  2. Regional Shelter Analysis Methodology

    Energy Technology Data Exchange (ETDEWEB)

    Dillon, Michael B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Dennison, Deborah [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kane, Jave [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Walker, Hoyt [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Miller, Paul [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-08-01

    The fallout from a nuclear explosion has the potential to injure or kill 100,000 or more people through exposure to external gamma (fallout) radiation. Existing buildings can reduce radiation exposure by placing material between fallout particles and exposed people. Lawrence Livermore National Laboratory was tasked with developing an operationally feasible methodology that could improve fallout casualty estimates. The methodology, called a Regional Shelter Analysis, combines the fallout protection that existing buildings provide civilian populations with the distribution of people in various locations. The Regional Shelter Analysis method allows the consideration of (a) multiple building types and locations within buildings, (b) country specific estimates, (c) population posture (e.g., unwarned vs. minimally warned), and (d) the time of day (e.g., night vs. day). The protection estimates can be combined with fallout predictions (or measurements) to (a) provide a more accurate assessment of exposure and injury and (b) evaluate the effectiveness of various casualty mitigation strategies. This report describes the Regional Shelter Analysis methodology, highlights key operational aspects (including demonstrating that the methodology is compatible with current tools), illustrates how to implement the methodology, and provides suggestions for future work.

  3. Hanford Site baseline risk assessment methodology

    International Nuclear Information System (INIS)

    1993-03-01

    This methodology has been developed to prepare human health and environmental evaluations of risk as part of the Comprehensive Environmental Response, Compensation, and Liability Act remedial investigations (RIs) and the Resource Conservation and Recovery Act facility investigations (FIs) performed at the Hanford Site pursuant to the Hanford Federal Facility Agreement and Consent Order referred to as the Tri-Party Agreement. Development of the methodology has been undertaken so that Hanford Site risk assessments are consistent with current regulations and guidance, while providing direction on flexible, ambiguous, or undefined aspects of the guidance. The methodology identifies Site-specific risk assessment considerations and integrates them with approaches for evaluating human and environmental risk that can be factored into the risk assessment program supporting the Hanford Site cleanup mission. Consequently, the methodology will enhance the preparation and review of individual risk assessments at the Hanford Site

  4. Hanford Site Risk Assessment Methodology. Revision 3

    International Nuclear Information System (INIS)

    1995-05-01

    This methodology has been developed to prepare human health and ecological evaluations of risk as part of the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) remedial investigations (RI) and the Resource conservation and Recovery Act of 1976 (RCRA) facility investigations (FI) performed at the Hanford Site pursuant to the hanford Federal Facility Agreement and Consent Order (Ecology et al. 1994), referred to as the Tri-Party Agreement. Development of the methodology has been undertaken so that Hanford Site risk assessments are consistent with current regulations and guidance, while providing direction on flexible, ambiguous, or undefined aspects of the guidance. The methodology identifies site-specific risk assessment considerations and integrates them with approaches for evaluating human and ecological risk that can be factored into the risk assessment program supporting the Hanford Site cleanup mission. Consequently, the methodology will enhance the preparation and review of individual risk assessments at the Hanford Site

  5. Air pollution monitoring - a methodological approach

    International Nuclear Information System (INIS)

    Trajkovska Trpevska, Magdalena

    2002-01-01

    Methodology for monitoring the emission of polluters in the air is a complex concept that in general embraces following fazes: sampling, laboratory treatment, and interpretation of results. In Company for technological and laboratory investigation and environmental protection - Mining Institute Skopje, the control of emission of polluters in the air is performing according methodology based in general on the recommendation of standard VDI 2.066 prescribe from Ministry of Ecology in Germany, because adequate legislation in our country does not exist. In this article the basic treatment of methodology for the air polluters emission control is presented. (Original)

  6. The policy trail methodology

    DEFF Research Database (Denmark)

    Holford, John; Larson, Anne; Melo, Susana

    of ‘policy trail’, arguing that it can overcome ‘methodological nationalism’ and link structure and agency in research on the ‘European educational space’. The ‘trail’ metaphor, she suggests, captures the intentionality and the erratic character of policy. The trail connects sites and brings about change......, but – although policy may be intended to be linear, with specific outcomes – policy often has to bend, and sometimes meets insurmountable obstacles. This symposium outlines and develops the methodology, but also reports on research undertaken within a major FP7 project (LLLIght’in’Europe, 2012-15) which made use......In recent years, the “policy trail” has been proposed as a methodology appropriate to the shifting and fluid governance of lifelong learning in the late modern world (Holford et al. 2013, Holford et al. 2013, Cort 2014). The contemporary environment is marked by multi-level governance (global...

  7. Nondestructive assay methodologies in nuclear forensics analysis

    International Nuclear Information System (INIS)

    Tomar, B.S.

    2016-01-01

    In the present chapter, the nondestructive assay (NDA) methodologies used for analysis of nuclear materials as a part of nuclear forensic investigation have been described. These NDA methodologies are based on (i) measurement of passive gamma and neutrons emitted by the radioisotopes present in the nuclear materials, (ii) measurement of gamma rays and neutrons emitted after the active interrogation of the nuclear materials with a source of X-rays, gamma rays or neutrons

  8. A Design Methodology for Computer Security Testing

    OpenAIRE

    Ramilli, Marco

    2013-01-01

    The field of "computer security" is often considered something in between Art and Science. This is partly due to the lack of widely agreed and standardized methodologies to evaluate the degree of the security of a system. This dissertation intends to contribute to this area by investigating the most common security testing strategies applied nowadays and by proposing an enhanced methodology that may be effectively applied to different threat scenarios with the same degree of effectiveness. ...

  9. Creativity in phenomenological methodology

    DEFF Research Database (Denmark)

    Dreyer, Pia; Martinsen, Bente; Norlyk, Annelise

    2014-01-01

    on the methodologies of van Manen, Dahlberg, Lindseth & Norberg, the aim of this paper is to argue that the increased focus on creativity and arts in research methodology is valuable to gain a deeper insight into lived experiences. We illustrate this point through examples from empirical nursing studies, and discuss......Nursing research is often concerned with lived experiences in human life using phenomenological and hermeneutic approaches. These empirical studies may use different creative expressions and art-forms to describe and enhance an embodied and personalised understanding of lived experiences. Drawing...... may support a respectful renewal of phenomenological research traditions in nursing research....

  10. Continuous culture apparatus and methodology

    International Nuclear Information System (INIS)

    Conway, H.L.

    1975-01-01

    At present, we are investigating the sorption of potentially toxic trace elements by phytoplankton under controlled laboratory conditions. Continuous culture techniques were used to study the mechanism of the sorption of the trace elements by unialgal diatom populations and the factors influencing this sorption. Continuous culture methodology has been used extensively to study bacterial kinetics. It is an excellent technique for obtaining a known physiological state of phytoplankton populations. An automated method for the synthesis of continuous culture medium for use in these experiments is described

  11. A protocol for a three-arm cluster randomized controlled superiority trial investigating the effects of two pedagogical methodologies in Swedish preschool settings on language and communication, executive functions, auditive selective attention, socioemotional skills and early maths skills.

    Science.gov (United States)

    Gerholm, Tove; Hörberg, Thomas; Tonér, Signe; Kallioinen, Petter; Frankenberg, Sofia; Kjällander, Susanne; Palmer, Anna; Taguchi, Hillevi Lenz

    2018-06-19

    During the preschool years, children develop abilities and skills in areas crucial for later success in life. These abilities include language, executive functions, attention, and socioemotional skills. The pedagogical methods used in preschools hold the potential to enhance these abilities, but our knowledge of which pedagogical practices aid which abilities, and for which children, is limited. The aim of this paper is to describe an intervention study designed to evaluate and compare two pedagogical methodologies in terms of their effect on the above-mentioned skills in Swedish preschool children. The study is a randomized control trial (RCT) where two pedagogical methodologies were tested to evaluate how they enhanced children's language, executive functions and attention, socioemotional skills, and early maths skills during an intensive 6-week intervention. Eighteen preschools including 28 units and 432 children were enrolled in a municipality close to Stockholm, Sweden. The children were between 4;0 and 6;0 years old and each preschool unit was randomly assigned to either of the interventions or to the control group. Background information on all children was collected via questionnaires completed by parents and preschools. Pre- and post-intervention testing consisted of a test battery including tests on language, executive functions, selective auditive attention, socioemotional skills and early maths skills. The interventions consisted of 6 weeks of intensive practice of either a socioemotional and material learning paradigm (SEMLA), for which group-based activities and interactional structures were the main focus, or an individual, digitally implemented attention and math training paradigm, which also included a set of self-regulation practices (DIL). All preschools were evaluated with the ECERS-3. If this intervention study shows evidence of a difference between group-based learning paradigms and individual training of specific skills in terms of

  12. Survey of Dynamic PSA Methodologies

    International Nuclear Information System (INIS)

    Lee, Hansul; Kim, Hyeonmin; Heo, Gyunyoung; Kim, Taewan

    2015-01-01

    Event Tree(ET)/Fault Tree(FT) are significant methodology in Probabilistic Safety Assessment(PSA) for Nuclear Power Plants(NPPs). ET/FT methodology has the advantage for users to be able to easily learn and model. It enables better communication between engineers engaged in the same field. However, conventional methodologies are difficult to cope with the dynamic behavior (e.g. operation mode changes or sequence-dependent failure) and integrated situation of mechanical failure and human errors. Meanwhile, new possibilities are coming for the improved PSA by virtue of the dramatic development on digital hardware, software, information technology, and data analysis.. More specifically, the computing environment has been greatly improved with being compared to the past, so we are able to conduct risk analysis with the large amount of data actually available. One method which can take the technological advantages aforementioned should be the dynamic PSA such that conventional ET/FT can have time- and condition-dependent behaviors in accident scenarios. In this paper, we investigated the various enabling techniques for the dynamic PSA. Even though its history and academic achievement was great, it seems less interesting from industrial and regulatory viewpoint. Authors expect this can contribute to better understanding of dynamic PSA in terms of algorithm, practice, and applicability. In paper, the overview for the dynamic PSA was conducted. Most of methodologies share similar concepts. Among them, DDET seems a backbone for most of methodologies since it can be applied to large problems. The common characteristics sharing the concept of DDET are as follows: • Both deterministic and stochastic approaches • Improves the identification of PSA success criteria • Helps to limit detrimental effects of sequence binning (normally adopted in PSA) • Helps to avoid defining non-optimal success criteria that may distort the risk • Framework for comprehensively considering

  13. Survey of Dynamic PSA Methodologies

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Hansul; Kim, Hyeonmin; Heo, Gyunyoung [Kyung Hee University, Yongin (Korea, Republic of); Kim, Taewan [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2015-05-15

    Event Tree(ET)/Fault Tree(FT) are significant methodology in Probabilistic Safety Assessment(PSA) for Nuclear Power Plants(NPPs). ET/FT methodology has the advantage for users to be able to easily learn and model. It enables better communication between engineers engaged in the same field. However, conventional methodologies are difficult to cope with the dynamic behavior (e.g. operation mode changes or sequence-dependent failure) and integrated situation of mechanical failure and human errors. Meanwhile, new possibilities are coming for the improved PSA by virtue of the dramatic development on digital hardware, software, information technology, and data analysis.. More specifically, the computing environment has been greatly improved with being compared to the past, so we are able to conduct risk analysis with the large amount of data actually available. One method which can take the technological advantages aforementioned should be the dynamic PSA such that conventional ET/FT can have time- and condition-dependent behaviors in accident scenarios. In this paper, we investigated the various enabling techniques for the dynamic PSA. Even though its history and academic achievement was great, it seems less interesting from industrial and regulatory viewpoint. Authors expect this can contribute to better understanding of dynamic PSA in terms of algorithm, practice, and applicability. In paper, the overview for the dynamic PSA was conducted. Most of methodologies share similar concepts. Among them, DDET seems a backbone for most of methodologies since it can be applied to large problems. The common characteristics sharing the concept of DDET are as follows: • Both deterministic and stochastic approaches • Improves the identification of PSA success criteria • Helps to limit detrimental effects of sequence binning (normally adopted in PSA) • Helps to avoid defining non-optimal success criteria that may distort the risk • Framework for comprehensively considering

  14. Soft Systems Methodology Embedded in Organizational Knowledge-Creating Process

    OpenAIRE

    Yoshida, Taketoshi

    2005-01-01

    We clarify the role of tacit knowing in the soft systems methodology. For the purpose we investigate the basic structure of its seven-stage model, while embedding the soft systems methodology in organizational knowledge-creating process. This leads to the introduction of concept creation to the methodology. This changes the basic shape of the soft systems methodology from learning cycle to organizational knowledge-creating spiral where concept creation is the key point.

  15. Computer Network Operations Methodology

    Science.gov (United States)

    2004-03-01

    means of their computer information systems. Disrupt - This type of attack focuses on disrupting as “attackers might surreptitiously reprogram enemy...by reprogramming the computers that control distribution within the power grid. A disruption attack introduces disorder and inhibits the effective...between commanders. The use of methodologies is widespread and done subconsciously to assist individuals in decision making. The processes that

  16. SCI Hazard Report Methodology

    Science.gov (United States)

    Mitchell, Michael S.

    2010-01-01

    This slide presentation reviews the methodology in creating a Source Control Item (SCI) Hazard Report (HR). The SCI HR provides a system safety risk assessment for the following Ares I Upper Stage Production Contract (USPC) components (1) Pyro Separation Systems (2) Main Propulsion System (3) Reaction and Roll Control Systems (4) Thrust Vector Control System and (5) Ullage Settling Motor System components.

  17. A Functional HAZOP Methodology

    DEFF Research Database (Denmark)

    Liin, Netta; Lind, Morten; Jensen, Niels

    2010-01-01

    A HAZOP methodology is presented where a functional plant model assists in a goal oriented decomposition of the plant purpose into the means of achieving the purpose. This approach leads to nodes with simple functions from which the selection of process and deviation variables follow directly...

  18. Complicating Methodological Transparency

    Science.gov (United States)

    Bridges-Rhoads, Sarah; Van Cleave, Jessica; Hughes, Hilary E.

    2016-01-01

    A historical indicator of the quality, validity, and rigor of qualitative research has been the documentation and disclosure of the behind-the-scenes work of the researcher. In this paper, we use what we call "methodological data" as a tool to complicate the possibility and desirability of such transparency. Specifically, we draw on our…

  19. Methodological Advances in Dea

    NARCIS (Netherlands)

    L. Cherchye (Laurens); G.T. Post (Thierry)

    2001-01-01

    textabstractWe survey the methodological advances in DEA over the last 25 years and discuss the necessary conditions for a sound empirical application. We hope this survey will contribute to the further dissemination of DEA, the knowledge of its relative strengths and weaknesses, and the tools

  20. NUSAM Methodology for Assessment.

    Energy Technology Data Exchange (ETDEWEB)

    Leach, Janice [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Snell, Mark K. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-07-01

    This document provides a methodology for the performance-based assessment of security systems designed for the protection of nuclear and radiological materials and the processes that produce and/or involve them. It is intended for use with both relatively simple installations and with highly regulated complex sites with demanding security requirements.

  1. MIRD methodology. Part 1

    International Nuclear Information System (INIS)

    Rojo, Ana M.

    2004-01-01

    This lecture develops the MIRD (Medical Internal Radiation Dose) methodology for the evaluation of the internal dose due to the administration of radiopharmaceuticals. In this first part, the basic concepts and the main equations are presented. The ICRP Dosimetric System is also explained. (author)

  2. Response Surface Methodology

    NARCIS (Netherlands)

    Kleijnen, Jack P.C.

    2014-01-01

    Abstract: This chapter first summarizes Response Surface Methodology (RSM), which started with Box and Wilson’s article in 1951 on RSM for real, non-simulated systems. RSM is a stepwise heuristic that uses first-order polynomials to approximate the response surface locally. An estimated polynomial

  3. MIRD methodology. Part 2

    International Nuclear Information System (INIS)

    Gomez Parada, Ines

    2004-01-01

    This paper develops the MIRD (Medical Internal Radiation Dose) methodology for the evaluation of the internal dose due to the administration of radiopharmaceuticals. In this second part, different methods for the calculation of the accumulated activity are presented, together with the effective half life definition. Different forms of Retention Activity curves are also shown. (author)

  4. Soft Systems Methodology

    Science.gov (United States)

    Checkland, Peter; Poulter, John

    Soft systems methodology (SSM) is an approach for tackling problematical, messy situations of all kinds. It is an action-oriented process of inquiry into problematic situations in which users learn their way from finding out about the situation, to taking action to improve it. The learning emerges via an organised process in which the situation is explored using a set of models of purposeful action (each built to encapsulate a single worldview) as intellectual devices, or tools, to inform and structure discussion about a situation and how it might be improved. This paper, written by the original developer Peter Checkland and practitioner John Poulter, gives a clear and concise account of the approach that covers SSM's specific techniques, the learning cycle process of the methodology and the craft skills which practitioners develop. This concise but theoretically robust account nevertheless includes the fundamental concepts, techniques, core tenets described through a wide range of settings.

  5. Transparent Guideline Methodology Needed

    DEFF Research Database (Denmark)

    Lidal, Ingeborg; Norén, Camilla; Mäkelä, Marjukka

    2013-01-01

    As part of learning at the Nordic Workshop of Evidence-based Medicine, we have read with interest the practice guidelines for central venous access, published in your Journal in 2012.1 We appraised the quality of this guideline using the checklist developed by The Evidence-Based Medicine Working ...... are based on best currently available evidence. Our concerns are in two main categories: the rigor of development, including methodology of searching, evaluating, and combining the evidence; and editorial independence, including funding and possible conflicts of interest....... Group.2 Similar criteria for guideline quality have been suggested elsewhere.3 Our conclusion was that this much needed guideline is currently unclear about several aspects of the methodology used in developing the recommendations. This means potential users cannot be certain that the recommendations...

  6. Web survey methodology

    CERN Document Server

    Callegaro, Mario; Vehovar, Asja

    2015-01-01

    Web Survey Methodology guides the reader through the past fifteen years of research in web survey methodology. It both provides practical guidance on the latest techniques for collecting valid and reliable data and offers a comprehensive overview of research issues. Core topics from preparation to questionnaire design, recruitment testing to analysis and survey software are all covered in a systematic and insightful way. The reader will be exposed to key concepts and key findings in the literature, covering measurement, non-response, adjustments, paradata, and cost issues. The book also discusses the hottest research topics in survey research today, such as internet panels, virtual interviewing, mobile surveys and the integration with passive measurements, e-social sciences, mixed modes and business intelligence. The book is intended for students, practitioners, and researchers in fields such as survey and market research, psychological research, official statistics and customer satisfaction research.

  7. Steganography: LSB Methodology

    Science.gov (United States)

    2012-08-02

    of LSB steganography in grayscale and color images . In J. Dittmann, K. Nahrstedt, and P. Wohlmacher, editors, Proceedings of the ACM, Special...Fridrich, M. Gojan and R. Du paper titled “Reliable detection of LSB steganography in grayscale and color images ”. From a general perspective Figure 2...REPORT Steganography : LSB Methodology (Progress Report) 14. ABSTRACT 16. SECURITY CLASSIFICATION OF: In computer science, steganography is the science

  8. Theoretical investigations into the influence of the position of a breaking line on the tensile failure of flat, round, bevel-edged tablets using finite element methodology (FEM) and its practical relevance for industrial tablet strength testing.

    Science.gov (United States)

    Podczeck, Fridrun; Newton, J Michael; Fromme, Paul

    2014-12-30

    Flat, round tablets may have a breaking ("score") line. Pharmacopoeial tablet breaking load tests are diametral in their design, and industrially used breaking load testers often have automatic tablet feeding systems, which position the tablets between the loading platens of the machine with the breaking lines in random orientation to the applied load. The aim of this work was to ascertain the influence of the position of the breaking line in a diametral compression test using finite element methodology (FEM) and to compare the theoretical results with practical findings using commercially produced bevel-edged, scored tablets. Breaking line test positions at an angle of 0°, 22.5°, 45°, 67.5° and 90° relative to the loading plane were studied. FEM results obtained for fully elastic and elasto-plastic tablets were fairly similar, but they highlighted large differences in stress distributions depending on the position of the breaking line. The stress values at failure were predicted to be similar for tablets tested at an angle of 45° or above, whereas at lower test angles the predicted breaking loads were up to three times larger. The stress distributions suggested that not all breaking line angles would result in clean tensile failure. Practical results, however, did not confirm the differences in the predicted breaking loads, but they confirmed differences in the way tablets broke. The results suggest that it is not advisable to convert breaking loads obtained on scored tablets into tablet tensile strength values, and comparisons between different tablets or batches should carefully consider the orientation of the breaking line with respect to the loading plane, as the failure mechanisms appear to vary. Copyright © 2014 Elsevier B.V. All rights reserved.

  9. Methodology applied to develop the DHIE: applied methodology

    CSIR Research Space (South Africa)

    Herselman, Marlien

    2016-12-01

    Full Text Available This section will address the methodology that was applied to develop the South African Digital Health Innovation Ecosystem (DHIE). Each chapter under Section B represents a specific phase in the methodology....

  10. Case Study Research Methodology

    Directory of Open Access Journals (Sweden)

    Mark Widdowson

    2011-01-01

    Full Text Available Commenting on the lack of case studies published in modern psychotherapy publications, the author reviews the strengths of case study methodology and responds to common criticisms, before providing a summary of types of case studies including clinical, experimental and naturalistic. Suggestions are included for developing systematic case studies and brief descriptions are given of a range of research resources relating to outcome and process measures. Examples of a pragmatic case study design and a hermeneutic single-case efficacy design are given and the paper concludes with some ethical considerations and an exhortation to the TA community to engage more widely in case study research.

  11. Sample size methodology

    CERN Document Server

    Desu, M M

    2012-01-01

    One of the most important problems in designing an experiment or a survey is sample size determination and this book presents the currently available methodology. It includes both random sampling from standard probability distributions and from finite populations. Also discussed is sample size determination for estimating parameters in a Bayesian setting by considering the posterior distribution of the parameter and specifying the necessary requirements. The determination of the sample size is considered for ranking and selection problems as well as for the design of clinical trials. Appropria

  12. Geotechnical site assessment methodology

    International Nuclear Information System (INIS)

    Tunbridge, L.W.; Richards, L.R.

    1985-09-01

    The reports comprising this volume concern the research conducted on geotechnical site assessment methodology at the Carwynnen test mine in granites in Cornwall, with particular reference to the effect of structures imposed by discontinuities on the engineering behaviour of rock masses. The topics covered are: in-situ stress measurements using (a) the hydraulic fracturing method, or (b) the US Bureau of Mines deformation probe; scanline discontinuity survey - coding form and instructions, and data; applicability of geostatistical estimation methods to scalar rock properties; comments on in-situ stress at the Carwynnen test mine and the state of stress in the British Isles. (U.K.)

  13. Microphysics evolution and methodology

    International Nuclear Information System (INIS)

    Dionisio, J.S.

    1990-01-01

    A few general features of microscopics evolution and their relationship with microscopics methodology are briefly surveyed. Several pluri-disciplinary and interdisciplinary aspects of microscopics research are also discussed in the present scientific context. The need for an equilibrium between individual tendencies and collective constraints required by team work, already formulated thirty years ago by Frederic Joliot, is particularly stressed in the present conjuncture of Nuclear Research favouring very large team projects and discouraging individual initiatives. The increasing importance of the science of science (due to their multiple social, economical, ecological aspects) and the stronger competition between national and international tendencies of scientific (and technical) cooperation are also discussed. (author)

  14. MIRD methodology; Metodologia MIRD

    Energy Technology Data Exchange (ETDEWEB)

    Rojo, Ana M [Autoridad Regulatoria Nuclear, Buenos Aires (Argentina); Gomez Parada, Ines [Sociedad Argentina de Radioproteccion, Buenos Aires (Argentina)

    2004-07-01

    The MIRD (Medical Internal Radiation Dose) system was established by the Society of Nuclear Medicine of USA in 1960 to assist the medical community in the estimation of the dose in organs and tissues due to the incorporation of radioactive materials. Since then, 'MIRD Dose Estimate Report' (from the 1 to 12) and 'Pamphlets', of great utility for the dose calculations, were published. The MIRD system was planned essentially for the calculation of doses received by the patients during nuclear medicine diagnostic procedures. The MIRD methodology for the absorbed doses calculations in different tissues is explained.

  15. Beam optimization: improving methodology

    International Nuclear Information System (INIS)

    Quinteiro, Guillermo F.

    2004-01-01

    Different optimization techniques commonly used in biology and food technology allow a systematic and complete analysis of response functions. In spite of the great interest in medical and nuclear physics in the problem of optimizing mixed beams, little attention has been given to sophisticate mathematical tools. Indeed, many techniques are perfectly suited to the typical problem of beam optimization. This article is intended as a guide to the use of two methods, namely Response Surface Methodology and Simplex, that are expected to fasten the optimization process and, meanwhile give more insight into the relationships among the dependent variables controlling the response

  16. Literacy research methodologies

    CERN Document Server

    Duke, Nell K

    2012-01-01

    The definitive reference on literacy research methods, this book serves as a key resource for researchers and as a text in graduate-level courses. Distinguished scholars clearly describe established and emerging methodologies, discuss the types of questions and claims for which each is best suited, identify standards of quality, and present exemplary studies that illustrate the approaches at their best. The book demonstrates how each mode of inquiry can yield unique insights into literacy learning and teaching and how the methods can work together to move the field forward.   New to This Editi

  17. Methodology of site studies

    International Nuclear Information System (INIS)

    Caries, J.C.; Hugon, J.; Grauby, A.

    1980-01-01

    This methodology consists in an essentially dynamic, estimated and follow-up analysis of the impact of discharges on all the environment compartments, whether natural or not, that play a part in the protection of man and his environment. It applies at two levels, to wit: the choice of site, or the detailed study of the site selected. Two examples of its application will be developed, namely: at the choice of site level in the case of marine sites, and of the detailed study level of the chosen site in that of a riverside site [fr

  18. Alternative pricing methodologies

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    With the increased interest in competitive market forces and growing recognition of the deficiencies in current practices, FERC and others are exploring alternatives to embedded cost pricing. A number of these alternatives are discussed in this chapter. Marketplace pricing, discussed briefly here, is the subject of the next chapter. Obviously, the pricing formula may combine several of these methodologies. One utility of which the authors are aware is seeking a price equal to the sum of embedded costs, opportunity costs, line losses, value of service, FERC's percentage adder formula and a contract service charge

  19. LOFT uncertainty-analysis methodology

    International Nuclear Information System (INIS)

    Lassahn, G.D.

    1983-01-01

    The methodology used for uncertainty analyses of measurements in the Loss-of-Fluid Test (LOFT) nuclear-reactor-safety research program is described and compared with other methodologies established for performing uncertainty analyses

  20. LOFT uncertainty-analysis methodology

    International Nuclear Information System (INIS)

    Lassahn, G.D.

    1983-01-01

    The methodology used for uncertainty analyses of measurements in the Loss-of-Fluid Test (LOFT) nuclear reactor safety research program is described and compared with other methodologies established for performing uncertainty analyses

  1. RHIC Data Correlation Methodology

    International Nuclear Information System (INIS)

    Michnoff, R.; D'Ottavio, T.; Hoff, L.; MacKay, W.; Satogata, T.

    1999-01-01

    A requirement for RHIC data plotting software and physics analysis is the correlation of data from all accelerator data gathering systems. Data correlation provides the capability for a user to request a plot of multiple data channels vs. time, and to make meaningful time-correlated data comparisons. The task of data correlation for RHIC requires careful consideration because data acquisition triggers are generated from various asynchronous sources including events from the RHIC Event Link, events from the two Beam Sync Links, and other unrelated clocks. In order to correlate data from asynchronous acquisition systems a common time reference is required. The RHIC data correlation methodology will allow all RHIC data to be converted to a common wall clock time, while still preserving native acquisition trigger information. A data correlation task force team, composed of the authors of this paper, has been formed to develop data correlation design details and provide guidelines for software developers. The overall data correlation methodology will be presented in this paper

  2. Intelligent systems engineering methodology

    Science.gov (United States)

    Fouse, Scott

    1990-01-01

    An added challenge for the designers of large scale systems such as Space Station Freedom is the appropriate incorporation of intelligent system technology (artificial intelligence, expert systems, knowledge-based systems, etc.) into their requirements and design. This presentation will describe a view of systems engineering which successfully addresses several aspects of this complex problem: design of large scale systems, design with requirements that are so complex they only completely unfold during the development of a baseline system and even then continue to evolve throughout the system's life cycle, design that involves the incorporation of new technologies, and design and development that takes place with many players in a distributed manner yet can be easily integrated to meet a single view of the requirements. The first generation of this methodology was developed and evolved jointly by ISX and the Lockheed Aeronautical Systems Company over the past five years on the Defense Advanced Research Projects Agency/Air Force Pilot's Associate Program, one of the largest, most complex, and most successful intelligent systems constructed to date. As the methodology has evolved it has also been applied successfully to a number of other projects. Some of the lessons learned from this experience may be applicable to Freedom.

  3. SMART performance analysis methodology

    International Nuclear Information System (INIS)

    Lim, H. S.; Kim, H. C.; Lee, D. J.

    2001-04-01

    To ensure the required and desired operation over the plant lifetime, the performance analysis for the SMART NSSS design is done by means of the specified analysis methodologies for the performance related design basis events(PRDBE). The PRDBE is an occurrence(event) that shall be accommodated in the design of the plant and whose consequence would be no more severe than normal service effects of the plant equipment. The performance analysis methodology which systematizes the methods and procedures to analyze the PRDBEs is as follows. Based on the operation mode suitable to the characteristics of the SMART NSSS, the corresponding PRDBEs and allowable range of process parameters for these events are deduced. With the developed control logic for each operation mode, the system thermalhydraulics are analyzed for the chosen PRDBEs using the system analysis code. Particularly, because of different system characteristics of SMART from the existing commercial nuclear power plants, the operation mode, PRDBEs, control logic, and analysis code should be consistent with the SMART design. This report presents the categories of the PRDBEs chosen based on each operation mode and the transition among these and the acceptance criteria for each PRDBE. It also includes the analysis methods and procedures for each PRDBE and the concept of the control logic for each operation mode. Therefore this report in which the overall details for SMART performance analysis are specified based on the current SMART design, would be utilized as a guide for the detailed performance analysis

  4. Relative Hazard Calculation Methodology

    International Nuclear Information System (INIS)

    DL Strenge; MK White; RD Stenner; WB Andrews

    1999-01-01

    The methodology presented in this document was developed to provide a means of calculating the RH ratios to use in developing useful graphic illustrations. The RH equation, as presented in this methodology, is primarily a collection of key factors relevant to understanding the hazards and risks associated with projected risk management activities. The RH equation has the potential for much broader application than generating risk profiles. For example, it can be used to compare one risk management activity with another, instead of just comparing it to a fixed baseline as was done for the risk profiles. If the appropriate source term data are available, it could be used in its non-ratio form to estimate absolute values of the associated hazards. These estimated values of hazard could then be examined to help understand which risk management activities are addressing the higher hazard conditions at a site. Graphics could be generated from these absolute hazard values to compare high-hazard conditions. If the RH equation is used in this manner, care must be taken to specifically define and qualify the estimated absolute hazard values (e.g., identify which factors were considered and which ones tended to drive the hazard estimation)

  5. Insights into PRA methodologies

    International Nuclear Information System (INIS)

    Gallagher, D.; Lofgren, E.; Atefi, B.; Liner, R.; Blond, R.; Amico, P.

    1984-08-01

    Probabilistic Risk Assessments (PRAs) for six nuclear power plants were examined to gain insight into how the choice of analytical methods can affect the results of PRAs. The PRA sreflectope considered was limited to internally initiated accidents sequences through core melt. For twenty methodological topic areas, a baseline or minimal methodology was specified. The choice of methods for each topic in the six PRAs was characterized in terms of the incremental level of effort above the baseline. A higher level of effort generally reflects a higher level of detail or a higher degree of sophistication in the analytical approach to a particular topic area. The impact on results was measured in terms of how additional effort beyond the baseline level changed the relative importance and ordering of dominant accident sequences compared to what would have been observed had methods corresponding to the baseline level of effort been employed. This measure of impact is a more useful indicator of how methods affect perceptions of plant vulnerabilities than changes in core melt frequency would be. However, the change in core melt frequency was used as a secondary measure of impact for nine topics where availability of information permitted. Results are presented primarily in the form of effort-impact matrices for each of the twenty topic areas. A suggested effort-impact profile for future PRAs is presented

  6. Methodological pluralism and structure of sociological theory

    Directory of Open Access Journals (Sweden)

    N. L. Polyakova

    2015-01-01

    Full Text Available In the paper the historical-sociological analysis is used as a means to show the differences between theoretical and empirical sociology. There exist several, basic traditions in theoretical sociology. The investigation of their competing theoretical and methodological principles carried out in the paper; identify some fundamental features of sociological theory as a whole.

  7. (Per)Forming Archival Research Methodologies

    Science.gov (United States)

    Gaillet, Lynee Lewis

    2012-01-01

    This article raises multiple issues associated with archival research methodologies and methods. Based on a survey of recent scholarship and interviews with experienced archival researchers, this overview of the current status of archival research both complicates traditional conceptions of archival investigation and encourages scholars to adopt…

  8. Scrum methodology in banking environment

    OpenAIRE

    Strihová, Barbora

    2015-01-01

    Bachelor thesis "Scrum methodology in banking environment" is focused on one of agile methodologies called Scrum and description of the methodology used in banking environment. Its main goal is to introduce the Scrum methodology and outline a real project placed in a bank focused on software development through a case study, address problems of the project, propose solutions of the addressed problems and identify anomalies of Scrum in software development constrained by the banking environmen...

  9. Experimental Economics: Some Methodological Notes

    OpenAIRE

    Fiore, Annamaria

    2009-01-01

    The aim of this work is presenting in a self-contained paper some methodological aspects as they are received in the current experimental literature. The purpose has been to make a critical review of some very influential papers dealing with methodological issues. In other words, the idea is to have a single paper where people first approaching experimental economics can find summarised (some) of the most important methodological issues. In particular, the focus is on some methodological prac...

  10. Theory of mind and Verstehen (understanding) methodology.

    Science.gov (United States)

    Kumazaki, Tsutomu

    2016-09-01

    Theory of mind is a prominent, but highly controversial, field in psychology, psychiatry, and philosophy of mind. Simulation theory, theory-theory and other views have been presented in recent decades, none of which are monolithic. In this article, various views on theory of mind are reviewed, and methodological problems within each view are investigated. The relationship between simulation theory and Verstehen (understanding) methodology in traditional human sciences is an intriguing issue, although the latter is not a direct ancestor of the former. From that perspective, lessons for current clinical psychiatry are drawn. © The Author(s) 2016.

  11. Methodology for evaluation of diagnostic performance

    International Nuclear Information System (INIS)

    Metz, C.E.

    1992-01-01

    Effort in this project during the past year has focused on the development, refinement, and distribution of computer software that will allow current Receiver Operating Characteristic (ROC) methodology to be used conveniently and reliably by investigators in a variety of evaluation tasks in diagnostic medicine; and on the development of new ROC methodology that will broaden the spectrum of evaluation tasks and/or experimental settings to which the fundamental approach can be applied. Progress has been limited by the amount of financial support made available to the project

  12. Geotechnical site assessment methodology

    International Nuclear Information System (INIS)

    Tunbridge, L.W.; Richards, L.R.

    1985-09-01

    A final report summarizing the research conducted on geotechnical site assessment methodology at the Carwynnen test mine in Cornwall. The geological setting of the test site in the Cornubian granite batholith is described. The effect of structure imposed by discontinuities on the engineering behaviour of rock masses is discussed and the scanline survey method of obtaining data on discontinuities in the rock mass is described. The applicability of some methods of statistical analysis for discontinuity data is reviewed. The requirement for remote geophysical methods of characterizing the mass is discussed and experiments using seismic and ultrasonic velocity measurements are reported. Methods of determining the in-situ stresses are described and the final results of a programme of in-situ stress measurements using the overcoring and hydrofracture methods are reported. (author)

  13. UNCOMMON SENSORY METHODOLOGIES

    Directory of Open Access Journals (Sweden)

    Vladimír Vietoris

    2015-02-01

    Full Text Available Sensory science is the young but the rapidly developing field of the food industry. Actually, the great emphasis is given to the production of rapid techniques of data collection, the difference between consumers and trained panel is obscured and the role of sensory methodologists is to prepare the ways for evaluation, by which a lay panel (consumers can achieve identical results as a trained panel. Currently, there are several conventional methods of sensory evaluation of food (ISO standards, but more sensory laboratories are developing methodologies that are not strict enough in the selection of evaluators, their mechanism is easily understandable and the results are easily interpretable. This paper deals with mapping of marginal methods used in sensory evaluation of food (new types of profiles, CATA, TDS, napping.

  14. Safety class methodology

    International Nuclear Information System (INIS)

    Donner, E.B.; Low, J.M.; Lux, C.R.

    1992-01-01

    DOE Order 6430.1A, General Design Criteria (GDC), requires that DOE facilities be evaluated with respect to ''safety class items.'' Although the GDC defines safety class items, it does not provide a methodology for selecting safety class items. The methodology described in this paper was developed to assure that Safety Class Items at the Savannah River Site (SRS) are selected in a consistent and technically defensible manner. Safety class items are those in the highest of four categories determined to be of special importance to nuclear safety and, merit appropriately higher-quality design, fabrication, and industrial test standards and codes. The identification of safety class items is approached using a cascading strategy that begins at the 'safety function' level (i.e., a cooling function, ventilation function, etc.) and proceeds down to the system, component, or structure level. Thus, the items that are required to support a safety function are SCls. The basic steps in this procedure apply to the determination of SCls for both new project activities, and for operating facilities. The GDC lists six characteristics of SCls to be considered as a starting point for safety item classification. They are as follows: 1. Those items whose failure would produce exposure consequences that would exceed the guidelines in Section 1300-1.4, ''Guidance on Limiting Exposure of the Public,'' at the site boundary or nearest point of public access 2. Those items required to maintain operating parameters within the safety limits specified in the Operational Safety Requirements during normal operations and anticipated operational occurrences. 3. Those items required for nuclear criticality safety. 4. Those items required to monitor the release of radioactive material to the environment during and after a Design Basis Accident. Those items required to achieve, and maintain the facility in a safe shutdown condition 6. Those items that control Safety Class Item listed above

  15. Situating methodology within qualitative research.

    Science.gov (United States)

    Kramer-Kile, Marnie L

    2012-01-01

    Qualitative nurse researchers are required to make deliberate and sometimes complex methodological decisions about their work. Methodology in qualitative research is a comprehensive approach in which theory (ideas) and method (doing) are brought into close alignment. It can be difficult, at times, to understand the concept of methodology. The purpose of this research column is to: (1) define qualitative methodology; (2) illuminate the relationship between epistemology, ontology and methodology; (3) explicate the connection between theory and method in qualitative research design; and 4) highlight relevant examples of methodological decisions made within cardiovascular nursing research. Although there is no "one set way" to do qualitative research, all qualitative researchers should account for the choices they make throughout the research process and articulate their methodological decision-making along the way.

  16. Researching Lean: Methodological implications of loose definitions

    DEFF Research Database (Denmark)

    Brännmark, Mikael; Langstrand, Jostein; Johansson, Stina

    2012-01-01

    practices seem to overlap with other popular management concepts, such as High Performance Work Systems, World Class Manufacturing and Total Quality Management. This confusion, combined with different methodological and theoretical traditions, has led to much debate and contradictory conclusions regarding...... Lean. The purpose of the paper is to illustrate some key methodological issues that need to be considered in future Lean research to allow increased understanding of Lean effects for different stakeholders, primarily meaning the customer, employer and employees. Design/methodology/approach – The paper...... on the case studies, we suggest that future investigations describe the Lean interventions in more detail. General descriptions or analogies, e.g. ‘learning organizations’, presumably increase the present confusion regarding Lean impact on different stakeholders. The case studies also illustrate...

  17. Measurement of the α4β2* nicotinic acetylcholine receptor ligand 2-[18F]Fluoro-A-85380 and its metabolites in human blood during PET investigation: a methodological study

    International Nuclear Information System (INIS)

    Sorger, Dietlind; Becker, Georg A.; Patt, Marianne; Schildan, Andreas; Grossmann, Udo; Schliebs, Reinhard; Seese, Anita; Kendziorra, Kai; Kluge, Magnus; Brust, Peter; Mukhin, Alexey G.; Sabri, Osama

    2007-01-01

    2-[ 18 F]fluoro-A-85380 (2-[ 18 F]FA) is a new radioligand for noninvasive imaging of α4β2* nicotinic acetylcholine receptors (nAChRs) by positron emission tomography (PET) in human brain. In most cases, quantification of 2-[ 18 F]FA receptor binding involves measurement of free nonmetabolized radioligand concentration in blood. This requires an efficient and reliable method to separate radioactive metabolites from the parent compound. In the present study, three analytical methods, thin layer chromatography (TLC), high-performance liquid chromatography (HPLC) and solid phase extraction (SPE) have been tested. Reversed-phase TLC of deproteinized aqueous samples of plasma provides good estimates of 2-[ 18 F]FA and its metabolites. However, because of the decreased radioactivity in plasma samples, this method can be used in humans over the first 2 h after radioligand injection only. Reliable quantification of the parent radioligand and its main metabolites was obtained using reversed-phase HPLC, followed by counting of eluted fractions in a well gamma counter. Three main and five minor metabolites of 2-[ 18 F]FA were detected in human blood using this method. On average, the unchanged 2-[ 18 F]FA fraction in plasma of healthy volunteers measured at 14, 60, 120, 240 and 420 min after radioligand injection was 87.3±2.2%, 74.4±3%, 68.8±5%, 62.3±8% and 61.0±8%, respectively. In patients with neurodegenerative disorders, the values corresponding to the three last time points were significantly lower. The fraction of nonmetabolized 2-[ 18 F]FA in plasma determined using SPE did not differ significantly from that obtained by HPLC (+gamma counting) (n=73, r=.95). Since SPE is less time-consuming than HPLC and provides comparable results, we conclude that SPE appears to be the most suitable method for measurement of 2-[ 18 F]FA parent fraction during PET investigations

  18. Methodological Problems of Nanotechnoscience

    Science.gov (United States)

    Gorokhov, V. G.

    Recently, we have reported on the definitions of nanotechnology as a new type of NanoTechnoScience and on the nanotheory as a cluster of the different natural and engineering theories. Nanotechnology is not only a new type of scientific-engineering discipline, but it evolves also in a “nonclassical” way. Nanoontology or nano scientific world view has a function of the methodological orientation for the choice the theoretical means and methods toward a solution to the scientific and engineering problems. This allows to change from one explanation and scientific world view to another without any problems. Thus, nanotechnology is both a field of scientific knowledge and a sphere of engineering activity, in other words, NanoTechnoScience is similar to Systems Engineering as the analysis and design of large-scale, complex, man/machine systems but micro- and nanosystems. Nano systems engineering as well as Macro systems engineering includes not only systems design but also complex research. Design orientation has influence on the change of the priorities in the complex research and of the relation to the knowledge, not only to “the knowledge about something”, but also to the knowledge as the means of activity: from the beginning control and restructuring of matter at the nano-scale is a necessary element of nanoscience.

  19. Methodological themes and variations

    International Nuclear Information System (INIS)

    Tetlock, P.E.

    1989-01-01

    This paper reports on the tangible progress that has been made in clarifying the underlying processes that affect both the likelihood of war in general and of nuclear war in particular. It also illustrates how difficult it is to make progress in this area. Nonetheless, what has been achieved should not be minimized. We have learned a good deal on both the theoretical and the methodological fronts and, perhaps, most important, we have learned a good deal about the limits of our knowledge. Knowledge of our ignorance---especially in a policy domain where confident, even glib, causal assertions are so common---can be a major contribution in itself. The most important service the behavioral and social sciences can currently provide to the policy making community may well be to make thoughtful skepticism respectable: to sensitize those who make key decisions to the uncertainty surrounding our understanding of international conflict and to the numerous qualifications that now need to be attached to simple causal theories concerning the origins of war

  20. Postgraduate Conception of Research Methodology: Implications for Learning and Teaching

    Science.gov (United States)

    Daniel, Ben; Kumar, Vijay; Omar, Noritah

    2018-01-01

    This qualitative inquiry investigates postgraduate students' conceptions of research methodology and how it contributes to their learning. It explores factors likely to motivate student choice of research methodology and challenges in understanding research methods. The research was carried out at research-intensive universities in New Zealand and…

  1. Qualitative methodology in a psychoanalytic single case study

    DEFF Research Database (Denmark)

    Grünbaum, Liselotte

    features and breaks in psychotherapy investigated. One aim of the study was to contribute to the development of a transparent and systematic methodology for the psychoanalytic case study by application of rigorous qualitative research methodology. To this end, inductive-deductive principles in line...

  2. A Methodology for Anatomic Ultrasound Image Diagnostic Quality Assessment

    DEFF Research Database (Denmark)

    Hemmsen, Martin Christian; Lange, Theis; Brandt, Andreas Hjelm

    2017-01-01

    are presented. Earlier uses of the methodology has shown that it ensures validity of the assessment, as it separates the influences between developer, investigator, and assessor once a research protocol has been established. This separation reduces confounding influences on the result from the developer......This paper discusses methods for assessment of ultrasound image quality based on our experiences with evaluating new methods for anatomic imaging. It presents a methodology to ensure a fair assessment between competing imaging methods using clinically relevant evaluations. The methodology...... to properly reveal the clinical value. The paper exemplifies the methodology using recent studies of Synthetic Aperture Sequential Beamforming tissue harmonic imaging....

  3. Dosimetric methodology of the ICRP

    International Nuclear Information System (INIS)

    Eckerman, K.F.

    1994-01-01

    Establishment of guidance for the protection of workers and members of the public from radiation exposures necessitates estimation of the radiation dose to tissues of the body at risk. The dosimetric methodology formulated by the International Commission on Radiological Protection (ICRP) is intended to be responsive to this need. While developed for radiation protection, elements of the methodology are often applied in addressing other radiation issues; e.g., risk assessment. This chapter provides an overview of the methodology, discusses its recent extension to age-dependent considerations, and illustrates specific aspects of the methodology through a number of numerical examples

  4. Transmission pricing: paradigms and methodologies

    Energy Technology Data Exchange (ETDEWEB)

    Shirmohammadi, Dariush [Pacific Gas and Electric Co., San Francisco, CA (United States); Vieira Filho, Xisto; Gorenstin, Boris [Centro de Pesquisas de Energia Eletrica (CEPEL), Rio de Janeiro, RJ (Brazil); Pereira, Mario V.P. [Power System Research, Rio de Janeiro, RJ (Brazil)

    1994-12-31

    In this paper we describe the principles of several paradigms and methodologies for pricing transmission services. The paper outlines some of the main characteristics of these paradigms and methodologies such as where they may be used for best results. Due to their popularity, power flow based MW-mile and short run marginal cost pricing methodologies will be covered in some detail. We conclude the paper with examples of the application of these two pricing methodologies for pricing transmission services in Brazil. (author) 25 refs., 2 tabs.

  5. Analytical methodology for nuclear safeguards

    International Nuclear Information System (INIS)

    Ramakumar, K.L.

    2011-01-01

    This paper attempts to briefly describe the analytical methodologies available and also highlight some of the challenges, expectations from nuclear material accounting and control (NUMAC) point of view

  6. Country report: a methodology

    International Nuclear Information System (INIS)

    Colin, A.

    2013-01-01

    This paper describes a methodology which could be applicable to establish a country report. In the framework of nuclear non proliferation appraisal and IAEA safeguards implementation, it is important to be able to assess the potential existence of undeclared nuclear materials and activities as undeclared facilities in the country under review. In our views a country report should aim at providing detailed information on nuclear related activities for each country examined taken 'as a whole' such as nuclear development, scientific and technical capabilities, etc. In order to study a specific country, we need to know if there is already an operating nuclear civil programme or not. In the first case, we have to check carefully if it could divert nuclear material, if there are misused declared facilities or if they operate undeclared facilities and conduct undeclared activities aiming at manufacturing nuclear weapon. In the second case, we should pay attention to the development of a nuclear civil project. A country report is based on a wide span of information (most of the time coming from open sources but sometimes coming also from confidential or private ones). Therefore, it is important to carefully check the nature and the credibility (reliability?) of these sources through cross-check examination. Eventually, it is necessary to merge information from different sources and apply an expertise filter. We have at our disposal a lot of performing tools to help us to assess, understand and evaluate the situation (cartography, imagery, bibliometry, etc.). These tools allow us to offer the best conclusions as far as possible. The paper is followed by the slides of the presentation. (author)

  7. Microbiological Methodology in Astrobiology

    Science.gov (United States)

    Abyzov, S. S.; Gerasimenko, L. M.; Hoover, R. B.; Mitskevich, I. N.; Mulyukin, A. L.; Poglazova, M. N.; Rozanov, A. Y.

    2005-01-01

    Searching for life in astromaterials to be delivered from the future missions to extraterrestrial bodies is undoubtedly related to studies of the properties and signatures of living microbial cells and microfossils on Earth. As model terrestrial analogs of Martian polar subsurface layers are often regarded the Antarctic glacier and Earth permafrost habitats where alive microbial cells preserved viability for millennia years due to entering the anabiotic state. For the future findings of viable microorganisms in samples from extraterrestrial objects, it is important to use a combined methodology that includes classical microbiological methods, plating onto nutrient media, direct epifluorescence and electron microscopy examinations, detection of the elemental composition of cells, radiolabeling techniques, PCR and FISH methods. Of great importance is to ensure authenticity of microorganisms (if any in studied samples) and to standardize the protocols used to minimize a risk of external contamination. Although the convincing evidence of extraterrestrial microbial life will may come from the discovery of living cells in astromaterials, biomorphs and microfossils must also be regarded as a target in search of life evidence bearing in mind a scenario that alive microorganisms had not be preserved and underwent mineralization. Under the laboratory conditions, processes that accompanied fossilization of cyanobacteria were reconstructed, and artificially produced cyanobacterial stromatolites resembles by their morphological properties those found in natural Earth habitats. Regarding the vital importance of distinguishing between biogenic and abiogenic signatures and between living and fossil microorganisms in analyzed samples, it is worthwhile to use some previously developed approaches based on electron microscopy examinations and analysis of elemental composition of biomorphs in situ and comparison with the analogous data obtained for laboratory microbial cultures and

  8. Kaupapa Maori Methodology: Trusting the Methodology through Thick and Thin

    Science.gov (United States)

    Hiha, Anne Aroha

    2016-01-01

    Kaupapa Maori is thoroughly theorised in academia in Aotearoa and those wishing to use it as their research methodology can find support through the writing of a number of Maori academics. What is not so well articulated, is the experiential voice of those who have used Kaupapa Maori as research methodology. My identity as a Maori woman…

  9. Application of RNA interference methodology to investigate and ...

    Indian Academy of Sciences (India)

    2014-07-31

    Jul 31, 2014 ... effective and economical method of inhibition gene expres- sion (Zhang et al. 2010 ... A cotransformation system via a two T-DNA vector was used to .... washed immediately with water after inoculation, and the. PBS buffer ..... study design, data collection and analysis, decision to publish, or preparation of ...

  10. Culture Methodology for Experimental Investigations Involving Rooted Submersed Aquatic Plants.

    Science.gov (United States)

    1984-11-01

    stolons or runners are best planted as intact plants (Sculthorpe 1967). Many species can be propagated from seed in addition to the above methods...J. 1984. Growth response of Myriophyllwm spicatu and Hydrilla verticillata when exposed to continuous, low concentrations of fluridone . Tech. Rept. A...aquatic plants, water, and bottom sediments. Weed Sci. 20:482-486. Sastroutomo, S. S. 1980. Dormancy and germination in axillary turions of iijiilZla

  11. Investigation of an Error Theory for Conjoint Measurement Methodology.

    Science.gov (United States)

    1983-05-01

    1ybren, 1982; Srinivasan and Shocker, 1973a, 1973b; Ullrich =d Cumins , 1973; Takane, Young, and de Leeui, 190C; Yount,, 1972’. & OEM...procedures as a diagnostic tool. Specifically, they used the oompted STRESS - value and a measure of fit they called PRECAP that could be obtained

  12. Application of RNA interference methodology to investigate and ...

    Indian Academy of Sciences (India)

    Specific fragments of the sugarcane mosaic virus (SCMV) coat protein gene (cp) were amplified by reverse transcription-polymerase chain reaction and used to construct a marker free small interfering RNA complex expression vector against SCMV. In planta transformation was performed on maize (Zea mays) inbred line ...

  13. Percutaneous Penetration - Methodological Considerations

    DEFF Research Database (Denmark)

    Holmgaard, Rikke; Benfeldt, Eva; Nielsen, Jesper B

    2014-01-01

    developed to replace methods involving experimental animals. The results obtained from these methods are decided not only by the chemical or product tested, but to a significant degree also by the experimental set-up and decisions made by the investigator during the planning phase. The present Mini...

  14. A methodology for social experimentation

    DEFF Research Database (Denmark)

    Ravn, Ib

    A methodology is outlined whereby one may improve the performance of a social system to the satisfaction of its stakeholders, that is, facilitate desirable social and organizational transformations......A methodology is outlined whereby one may improve the performance of a social system to the satisfaction of its stakeholders, that is, facilitate desirable social and organizational transformations...

  15. Workshops as a Research Methodology

    Science.gov (United States)

    Ørngreen, Rikke; Levinsen, Karin

    2017-01-01

    This paper contributes to knowledge on workshops as a research methodology, and specifically on how such workshops pertain to e-learning. A literature review illustrated that workshops are discussed according to three different perspectives: workshops as a means, workshops as practice, and workshops as a research methodology. Focusing primarily on…

  16. Methodological Pluralism and Narrative Inquiry

    Science.gov (United States)

    Michie, Michael

    2013-01-01

    This paper considers how the integral theory model of Nancy Davis and Laurie Callihan might be enacted using a different qualitative methodology, in this case the narrative methodology. The focus of narrative research is shown to be on "what meaning is being made" rather than "what is happening here" (quadrant 2 rather than…

  17. Building ASIPS the Mescal methodology

    CERN Document Server

    Gries, Matthias

    2006-01-01

    A number of system designers use ASIP's rather than ASIC's to implement their system solutions. This book gives a comprehensive methodology for the design of these application-specific instruction processors (ASIPs). It includes demonstrations of applications of the methodologies using the Tipi research framework.

  18. A methodology for software documentation

    OpenAIRE

    Torres Júnior, Roberto Dias; Ahlert, Hubert

    2000-01-01

    With the growing complexity of window based software and the use of object-oriented, the development of software is getting more complex than ever. Based on that, this article intends to present a methodology for software documentation and to analyze our experience and how this methodology can aid the software maintenance

  19. Methodology for Environmental Impact Assessment; Metodik foer miljoekonsekvensbedoemning

    Energy Technology Data Exchange (ETDEWEB)

    Malmlund, Anna (Structor Miljoebyraan Stockholm AB (Sweden))

    2010-12-15

    This report is an appendix to 'Environmental Impact Assessment Interim storage, encapsulation and disposal of spent nuclear fuel'. The appendix presents the methodology and criteria used in support investigations to conduct impact assessments.

  20. Quantum mechanics and faster-than-light communication: methodological considerations

    International Nuclear Information System (INIS)

    Ghirardi, G.C.; Weber, T.

    1983-06-01

    A detailed quantum mechanical analysis of a recent proposal of faster than light communication through wave packet reduction is performed. The discussion allows us to focus on some methodological problems about critical investigations in physical theories. (author)

  1. Value and Vision-based Methodology in Integrated Design

    DEFF Research Database (Denmark)

    Tollestrup, Christian

    on empirical data from workshop where the Value and Vision-based methodology has been taught. The research approach chosen for this investigation is Action Research, where the researcher plays an active role in generating the data and gains a deeper understanding of the investigated phenomena. The result...... of this thesis is the value transformation from an explicit set of values to a product concept using a vision based concept development methodology based on the Pyramid Model (Lerdahl, 2001) in a design team context. The aim of this thesis is to examine how the process of value transformation is occurring within...... is divided in three; the systemic unfolding of the Value and Vision-based methodology, the structured presentation of practical implementation of the methodology and finally the analysis and conclusion regarding the value transformation, phenomena and learning aspects of the methodology....

  2. Cross-section methodology in SIMMER

    International Nuclear Information System (INIS)

    Soran, P.D.

    1975-11-01

    The cross-section methodology incorporated in the SIMMER code is described. Data base for all cross sections is the ENDF/B system with various progressing computer codes to group collapse and modify the group constants which are used in SIMMER. Either infinitely dilute cross sections or the Bondarenko formalism can be used in SIMMER. Presently only a microscopic treatment is considered, but preliminary macroscopic algorithms have been investigated

  3. Cross-section methodology in SIMMER

    International Nuclear Information System (INIS)

    Soran, P.D.

    1976-05-01

    The cross-section methodology incorporated in the SIMMER code is described. Data base for all cross sections is the ENDF/B system with various progressing computer codes to group collapse and modify the group constants which are used in SIMMER. Either infinitely dilute cross sections or the Bondarenko formalism can be used in SIMMER. Presently only a microscopic treatment is considered, but preliminary macroscopic algorithms have been investigated

  4. Response Surface Methodology: 1966-1986

    Science.gov (United States)

    1986-09-01

    male broilers to examine quantitatively the protein levels in starter and Gnisher rations and the time of ration change to optimize body weight, carcass...1983). ’Akn Investigation of Protein Levels for Broiler Starter and Finisher Rations and the Time of Ration Change by Response Surface Methodology...when Responses Within a Litter are Correlated,’ Biometrics, 37, 153-156. Shek, E., Ghani, M. and Jones, R.E. (1980). "Simplex Search in Optimization

  5. AEGIS methodology and a perspective from AEGIS methodology demonstrations

    International Nuclear Information System (INIS)

    Dove, F.H.

    1981-03-01

    Objectives of AEGIS (Assessment of Effectiveness of Geologic Isolation Systems) are to develop the capabilities needed to assess the post-closure safety of waste isolation in geologic formation; demonstrate these capabilities on reference sites; apply the assessment methodology to assist the NWTS program in site selection, waste package and repository design; and perform repository site analyses for the licensing needs of NWTS. This paper summarizes the AEGIS methodology, the experience gained from methodology demonstrations, and provides an overview in the following areas: estimation of the response of a repository to perturbing geologic and hydrologic events; estimation of the transport of radionuclides from a repository to man; and assessment of uncertainties

  6. Methodology to remediate a mixed waste site

    Energy Technology Data Exchange (ETDEWEB)

    Berry, J.B.

    1994-08-01

    In response to the need for a comprehensive and consistent approach to the complex issue of mixed waste management, a generalized methodology for remediation of a mixed waste site has been developed. The methodology is based on requirements set forth in the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) and the Resource Conservation and Recovery Act (RCRA) and incorporates ``lessons learned`` from process design, remediation methodologies, and remediation projects. The methodology is applied to the treatment of 32,000 drums of mixed waste sludge at the Oak Ridge K-25 Site. Process technology options are developed and evaluated, first with regard to meeting system requirements and then with regard to CERCLA performance criteria. The following process technology options are investigated: (1) no action, (2) separation of hazardous and radioactive species, (3) dewatering, (4) drying, and (5) solidification/stabilization. The first two options were eliminated from detailed consideration because they did not meet the system requirements. A quantitative evaluation clearly showed that, based on system constraints and project objectives, either dewatering or drying the mixed waste sludge was superior to the solidification/stabilization process option. The ultimate choice between the drying and the dewatering options will be made on the basis of a technical evaluation of the relative merits of proposals submitted by potential subcontractors.

  7. Methodology to remediate a mixed waste site

    International Nuclear Information System (INIS)

    Berry, J.B.

    1994-08-01

    In response to the need for a comprehensive and consistent approach to the complex issue of mixed waste management, a generalized methodology for remediation of a mixed waste site has been developed. The methodology is based on requirements set forth in the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) and the Resource Conservation and Recovery Act (RCRA) and incorporates ''lessons learned'' from process design, remediation methodologies, and remediation projects. The methodology is applied to the treatment of 32,000 drums of mixed waste sludge at the Oak Ridge K-25 Site. Process technology options are developed and evaluated, first with regard to meeting system requirements and then with regard to CERCLA performance criteria. The following process technology options are investigated: (1) no action, (2) separation of hazardous and radioactive species, (3) dewatering, (4) drying, and (5) solidification/stabilization. The first two options were eliminated from detailed consideration because they did not meet the system requirements. A quantitative evaluation clearly showed that, based on system constraints and project objectives, either dewatering or drying the mixed waste sludge was superior to the solidification/stabilization process option. The ultimate choice between the drying and the dewatering options will be made on the basis of a technical evaluation of the relative merits of proposals submitted by potential subcontractors

  8. Methodological pluralism in the teaching of Astronomy

    Science.gov (United States)

    de Macedo, Josué Antunes; Voelzke, Marcos Rincon

    2015-04-01

    This paper discusses the feasibility of using a teaching strategy called methodological pluralism, consisting of the use of various methodological resources in order to provide a meaningful learning. It is part of a doctoral thesis, which aims to investigate contributions to the use of traditional resources combined with digital technologies, in order to create autonomy for future teachers of Natural Sciences and Mathematics in relation to themes in Astronomy. It was offered an extension course at the "Federal Institution of Education, Science and Technology" in the North of Minas Gerais (FINMG), Campus Januaria, for thirty-two students of licentiate courses in Physics, Mathematics and Biological Sciences, involving themes of Astronomy, in order to search and contribute to improving the training of future teachers. The following aspects are used: the mixed methodology, with pre-experimental design, combined with content analysis. The results indicate the rates of students' prior knowledge in relation to Astronomy was low; meaningful learning indications of concepts related to Astronomy, and the feasibility of using digital resources Involving technologies, articulated with traditional materials in the teaching of Astronomy. This research sought to contribute to the initial teacher training, especially in relation to Astronomy Teaching, proposing new alternatives to promote the teaching of this area of knowledge, extending the methodological options of future teachers.

  9. Essential methodological considerations when using grounded theory.

    Science.gov (United States)

    Achora, Susan; Matua, Gerald Amandu

    2016-07-01

    To suggest important methodological considerations when using grounded theory. A research method widely used in nursing research is grounded theory, at the centre of which is theory construction. However, researchers still struggle with some of its methodological issues. Although grounded theory is widely used to study and explain issues in nursing practice, many researchers are still failing to adhere to its rigorous standards. Researchers should articulate the focus of their investigations - the substantive area of interest as well as the focal population. This should be followed by a succinct explanation of the strategies used to collect and analyse data, supported by clear coding processes. Finally, the resolution of the core issues, including the core category and related categories, should be explained to advance readers' understanding. Researchers should endeavour to understand the tenets of grounded theory. This enables 'neophytes' in particular to make methodological decisions that will improve their studies' rigour and fit with grounded theory. This paper complements the current dialogue on improving the understanding of grounded theory methodology in nursing research. The paper also suggests important procedural decisions researchers need to make to preserve their studies' scientific merit and fit with grounded theory.

  10. Medicare Program; End-Stage Renal Disease Prospective Payment System, Coverage and Payment for Renal Dialysis Services Furnished to Individuals With Acute Kidney Injury, End-Stage Renal Disease Quality Incentive Program, Durable Medical Equipment, Prosthetics, Orthotics and Supplies Competitive Bidding Program Bid Surety Bonds, State Licensure and Appeals Process for Breach of Contract Actions, Durable Medical Equipment, Prosthetics, Orthotics and Supplies Competitive Bidding Program and Fee Schedule Adjustments, Access to Care Issues for Durable Medical Equipment; and the Comprehensive End-Stage Renal Disease Care Model. Final rule.

    Science.gov (United States)

    2016-11-04

    This rule updates and makes revisions to the End-Stage Renal Disease (ESRD) Prospective Payment System (PPS) for calendar year 2017. It also finalizes policies for coverage and payment for renal dialysis services furnished by an ESRD facility to individuals with acute kidney injury. This rule also sets forth requirements for the ESRD Quality Incentive Program, including the inclusion of new quality measures beginning with payment year (PY) 2020 and provides updates to programmatic policies for the PY 2018 and PY 2019 ESRD QIP. This rule also implements statutory requirements for bid surety bonds and state licensure for the Durable Medical Equipment, Prosthetics, Orthotics, and Supplies (DMEPOS) Competitive Bidding Program (CBP). This rule also expands suppliers' appeal rights in the event of a breach of contract action taken by CMS, by revising the appeals regulation to extend the appeals process to all types of actions taken by CMS for a supplier's breach of contract, rather than limit an appeal for the termination of a competitive bidding contract. The rule also finalizes changes to the methodologies for adjusting fee schedule amounts for DMEPOS using information from CBPs and for submitting bids and establishing single payment amounts under the CBPs for certain groupings of similar items with different features to address price inversions. Final changes also are made to the method for establishing bid limits for items under the DMEPOS CBPs. In addition, this rule summarizes comments on the impacts of coordinating Medicare and Medicaid Durable Medical Equipment for dually eligible beneficiaries. Finally, this rule also summarizes comments received in response to a request for information related to the Comprehensive ESRD Care Model and future payment models affecting renal care.

  11. Does Metformin Reduce Cancer Risks? Methodologic Considerations.

    Science.gov (United States)

    Golozar, Asieh; Liu, Shuiqing; Lin, Joeseph A; Peairs, Kimberly; Yeh, Hsin-Chieh

    2016-01-01

    The substantial burden of cancer and diabetes and the association between the two conditions has been a motivation for researchers to look for targeted strategies that can simultaneously affect both diseases and reduce their overlapping burden. In the absence of randomized clinical trials, researchers have taken advantage of the availability and richness of administrative databases and electronic medical records to investigate the effects of drugs on cancer risk among diabetic individuals. The majority of these studies suggest that metformin could potentially reduce cancer risk. However, the validity of this purported reduction in cancer risk is limited by several methodological flaws either in the study design or in the analysis. Whether metformin use decreases cancer risk relies heavily on the availability of valid data sources with complete information on confounders, accurate assessment of drug use, appropriate study design, and robust analytical techniques. The majority of the observational studies assessing the association between metformin and cancer risk suffer from methodological shortcomings and efforts to address these issues have been incomplete. Future investigations on the association between metformin and cancer risk should clearly address the methodological issues due to confounding by indication, prevalent user bias, and time-related biases. Although the proposed strategies do not guarantee a bias-free estimate for the association between metformin and cancer, they will reduce synthesis of and reporting of erroneous results.

  12. Methodological practicalities in analytical generalization

    DEFF Research Database (Denmark)

    Halkier, Bente

    2011-01-01

    generalization. Theoretically, the argumentation in the article is based on practice theory. The main part of the article describes three different examples of ways of generalizing on the basis of the same qualitative data material. There is a particular focus on describing the methodological strategies......In this article, I argue that the existing literature on qualitative methodologies tend to discuss analytical generalization at a relatively abstract and general theoretical level. It is, however, not particularly straightforward to “translate” such abstract epistemological principles into more...... operative methodological strategies for producing analytical generalizations in research practices. Thus, the aim of the article is to contribute to the discussions among qualitatively working researchers about generalizing by way of exemplifying some of the methodological practicalities in analytical...

  13. Nanotoxicology materials, methodologies, and assessments

    CERN Document Server

    Durán, Nelson; Alves, Oswaldo L; Zucolotto, Valtencir

    2014-01-01

    This book begins with a detailed introduction to engineered nanostructures, followed by a section on methodologies used in research on cytotoxicity and genotoxicity, and concluding with evidence for the cyto- and genotoxicity of specific nanoparticles.

  14. Reflective Methodology: The Beginning Teacher

    Science.gov (United States)

    Templeton, Ronald K.; Siefert, Thomas E.

    1970-01-01

    Offers a variety of specific techniques which will help the beginning teacher to implement reflective methodology and create an inquiry-centered classroom atmosphere, at the same time meeting the many more pressing demands of first-year teaching. (JES)

  15. Methodologies used in Project Management

    OpenAIRE

    UNGUREANU, Adrian; UNGUREANU, Anca

    2014-01-01

    Undoubtedly, a methodology properly defined and strictly followed for project management provides a firm guarantee that the work will be done on time, in budget and according to specifications. A project management methodology in simple terms is a “must-have” to avoid failure and reduce risks, because is one of the critical success factors, such basic skills of the management team. This is the simple way to guide the team through the design and execution phases, processes and tasks throughout...

  16. Methodology for ranking restoration options

    DEFF Research Database (Denmark)

    Jensen, Per Hedemann

    1999-01-01

    techniques as a function of contamination and site characteristics. The project includes analyses of existing remediation methodologies and contaminated sites, and is structured in the following steps:-characterisation of relevant contaminated sites -identication and characterisation of relevant restoration...... techniques -assessment of the radiological impact -development and application of a selection methodology for restoration options -formulation ofgeneric conclusions and development of a manual The project is intended to apply to situations in which sites with nuclear installations have been contaminated...

  17. The fairness of the PPS reimbursement methodology.

    Science.gov (United States)

    Gianfrancesco, F D

    1990-01-01

    In FY 1984 the Medicare program implemented a new method of reimbursing hospitals for inpatient services, the Prospective Payment System (PPS). Under this system, hospitals are paid a predetermined amount per Medicare discharge, which varies according to certain patient and hospital characteristics. This article investigates the presence of systematic biases and other potential imperfections in the PPS reimbursement methodology as revealed by its effects on Medicare operating ratios. The study covers the first three years of the PPS (approximately 1984-1986) and is based on hospital data from the Medicare cost reports and other related sources. Regression techniques were applied to these data to determine how Medicare operating ratios were affected by specific aspects of the reimbursement methodology. Several possible imbalances were detected. The potential undercompensation relating to these can be harmful to certain classes of hospitals and to the Medicare populations that they serve. PMID:2109738

  18. Gamma ray auto absorption correction evaluation methodology

    International Nuclear Information System (INIS)

    Gugiu, Daniela; Roth, Csaba; Ghinescu, Alecse

    2010-01-01

    Neutron activation analysis (NAA) is a well established nuclear technique, suited to investigate the microstructural or elemental composition and can be applied to studies of a large variety of samples. The work with large samples involves, beside the development of large irradiation devices with well know neutron field characteristics, the knowledge of perturbing phenomena and adequate evaluation of correction factors like: neutron self shielding, extended source correction, gamma ray auto absorption. The objective of the works presented in this paper is to validate an appropriate methodology for gamma ray auto absorption correction evaluation for large inhomogeneous samples. For this purpose a benchmark experiment has been defined - a simple gamma ray transmission experiment, easy to be reproduced. The gamma ray attenuation in pottery samples has been measured and computed using MCNP5 code. The results show a good agreement between the computed and measured values, proving that the proposed methodology is able to evaluate the correction factors. (authors)

  19. Prescriptive Training Courseware: IS-Design Methodology

    Directory of Open Access Journals (Sweden)

    Elspeth McKay

    2018-03-01

    Full Text Available Information systems (IS research is found in many diverse communities. This paper explores the human-dimension of human-computer interaction (HCI to present IS-design practice in the light of courseware development. Assumptions are made that online courseware provides the perfect solution for maintaining a knowledgeable, well skilled workforce. However, empirical investigations into the effectiveness of information technology (IT-induced training solutions are scarce. Contemporary research concentrates on information communications technology (ICT training tools without considering their effectiveness. This paper offers a prescriptive IS-design methodology for managing the requirements for efficient and effective courseware development. To develop the methodology, we examined the main instructional design (ID factors that affect the design of IT-induced training programs. We also examined the tension between maintaining a well-skilled workforce and effective instructional systems design (ISD practice by probing the current ID models used by courseware developers since 1990. An empirical research project, which utilized this IS-design methodology investigated the effectiveness of using IT to train government employees in introductory ethics; this was a study that operationalized the interactive effect of cognitive preference and instructional format on training performance outcomes. The data was analysed using Rasch item response theory (IRT that models the discrimination of people’s performance relative to each other’s performance and the test-items’ difficulty relative to each test-item on the same logit scale. The findings revealed that IS training solutions developed using this IS-design methodology can be adapted to provide trainees with their preferred instructional mode and facilitate cost effective eTraining outcomes.

  20. Multidisciplinary accident investigation : volume 1

    Science.gov (United States)

    1976-09-01

    The final report of the Multidisciplinary Accident Investigation Team of the Maryland Medical-Legal Foundation, Inc. is presented. The report describes the methodology, results, discussions, conclusions and recommendations pertaining to the investiga...

  1. A Quantitative Examination of Critical Success Factors Comparing Agile and Waterfall Project Management Methodologies

    Science.gov (United States)

    Pedersen, Mitra

    2013-01-01

    This study investigated the rate of success for IT projects using agile and standard project management methodologies. Any successful project requires use of project methodology. Specifically, large projects require formal project management methodologies or models, which establish a blueprint of processes and project planning activities. This…

  2. Hanford Site baseline risk assessment methodology. Revision 2

    Energy Technology Data Exchange (ETDEWEB)

    1993-03-01

    This methodology has been developed to prepare human health and environmental evaluations of risk as part of the Comprehensive Environmental Response, Compensation, and Liability Act remedial investigations (RIs) and the Resource Conservation and Recovery Act facility investigations (FIs) performed at the Hanford Site pursuant to the Hanford Federal Facility Agreement and Consent Order referred to as the Tri-Party Agreement. Development of the methodology has been undertaken so that Hanford Site risk assessments are consistent with current regulations and guidance, while providing direction on flexible, ambiguous, or undefined aspects of the guidance. The methodology identifies Site-specific risk assessment considerations and integrates them with approaches for evaluating human and environmental risk that can be factored into the risk assessment program supporting the Hanford Site cleanup mission. Consequently, the methodology will enhance the preparation and review of individual risk assessments at the Hanford Site.

  3. Methodological exploratory study applied to occupational epidemiology

    Energy Technology Data Exchange (ETDEWEB)

    Carneiro, Janete C.G. Gaburo; Vasques, MOnica Heloisa B.; Fontinele, Ricardo S.; Sordi, Gian Maria A. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)]. E-mail: janetegc@ipen.br

    2007-07-01

    The utilization of epidemiologic methods and techniques has been object of practical experimentation and theoretical-methodological reflection in health planning and programming process. Occupational Epidemiology is the study of the causes and prevention of diseases and injuries from exposition and risks in the work environment. In this context, there is no intention to deplete such a complex theme but to deal with basic concepts of Occupational Epidemiology, presenting the main characteristics of the analysis methods used in epidemiology, as investigate the possible determinants of exposition (chemical, physical and biological agents). For this study, the social-demographic profile of the IPEN-CNEN/SP work force was used. The knowledge of this reference population composition is based on sex, age, educational level, marital status and different occupations, aiming to know the relation between the health aggravating factors and these variables. The methodology used refers to a non-experimental research based on a theoretical methodological practice. The work performed has an exploratory character, aiming a later survey of indicators in the health area in order to analyze possible correlations related to epidemiologic issues. (author)

  4. Methodological exploratory study applied to occupational epidemiology

    International Nuclear Information System (INIS)

    Carneiro, Janete C.G. Gaburo; Vasques, MOnica Heloisa B.; Fontinele, Ricardo S.; Sordi, Gian Maria A.

    2007-01-01

    The utilization of epidemiologic methods and techniques has been object of practical experimentation and theoretical-methodological reflection in health planning and programming process. Occupational Epidemiology is the study of the causes and prevention of diseases and injuries from exposition and risks in the work environment. In this context, there is no intention to deplete such a complex theme but to deal with basic concepts of Occupational Epidemiology, presenting the main characteristics of the analysis methods used in epidemiology, as investigate the possible determinants of exposition (chemical, physical and biological agents). For this study, the social-demographic profile of the IPEN-CNEN/SP work force was used. The knowledge of this reference population composition is based on sex, age, educational level, marital status and different occupations, aiming to know the relation between the health aggravating factors and these variables. The methodology used refers to a non-experimental research based on a theoretical methodological practice. The work performed has an exploratory character, aiming a later survey of indicators in the health area in order to analyze possible correlations related to epidemiologic issues. (author)

  5. Managerial Methodology in Public Institutions

    Directory of Open Access Journals (Sweden)

    Ion VERBONCU

    2010-10-01

    Full Text Available One of the most important ways of making public institutions more efficient is by applying managerial methodology, embodied in the promotion of management tools, modern and sophisticated methodologies, as well as operation of designing/redesigning and maintenance of the management process and its components. Their implementation abides the imprint of constructive and functional particularities of public institutions, decentralized and devolved, and, of course, the managers’ expertise of these organizations. Managerial methodology is addressed through three important instruments diagnosis, management by objectives and scoreboard. Its presence in the performance management process should be mandatory, given the favorable influence on the management and economic performance and the degree of scholastic approach of the managers’ performance.

  6. Blanket safety by GEMSAFE methodology

    International Nuclear Information System (INIS)

    Sawada, Tetsuo; Saito, Masaki

    2001-01-01

    General Methodology of Safety Analysis and Evaluation for Fusion Energy Systems (GEMSAFE) has been applied to a number of fusion system designs, such as R-tokamak, Fusion Experimental Reactor (FER), and the International Thermonuclear Experimental Reactor (ITER) designs in the both stages of Conceptual Design Activities (CDA) and Engineering Design Activities (EDA). Though the major objective of GEMSAFE is to reasonably select design basis events (DBEs) it is also useful to elucidate related safety functions as well as requirements to ensure its safety. In this paper, we apply the methodology to fusion systems with future tritium breeding blankets and make clear which points of the system should be of concern from safety ensuring point of view. In this context, we have obtained five DBEs that are related to the blanket system. We have also clarified the safety functions required to prevent accident propagations initiated by those blanket-specific DBEs. The outline of the methodology is also reviewed. (author)

  7. The NLC Software Requirements Methodology

    Energy Technology Data Exchange (ETDEWEB)

    Shoaee, Hamid

    2002-08-20

    We describe the software requirements and development methodology developed for the NLC control system. Given the longevity of that project, and the likely geographical distribution of the collaborating engineers, the planned requirements management process is somewhat more formal than the norm in high energy physics projects. The short term goals of the requirements process are to accurately estimate costs, to decompose the problem, and to determine likely technologies. The long term goal is to enable a smooth transition from high level functional requirements to specific subsystem and component requirements for individual programmers, and to support distributed development. The methodology covers both ends of that life cycle. It covers both the analytical and documentary tools for software engineering, and project management support. This paper introduces the methodology, which is fully described in [1].

  8. Methodology, theoretical framework and scholarly significance: An ...

    African Journals Online (AJOL)

    Methodology, theoretical framework and scholarly significance: An overview ... AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search ... Keywords: Legal Research, Methodology, Theory, Pedagogy, Legal Training, Scholarship ...

  9. Methodological Guidelines for Advertising Research

    DEFF Research Database (Denmark)

    Rossiter, John R.; Percy, Larry

    2017-01-01

    In this article, highly experienced advertising academics and advertising research consultants John R. Rossiter and Larry Percy present and discuss what they believe to be the seven most important methodological guidelines that need to be implemented to improve the practice of advertising research....... Their focus is on methodology, defined as first choosing a suitable theoretical framework to guide the research study and then identifying the advertising responses that need to be studied. Measurement of those responses is covered elsewhere in this special issue in the article by Bergkvist and Langner. Most...

  10. Acoustic emission methodology and application

    CERN Document Server

    Nazarchuk, Zinoviy; Serhiyenko, Oleh

    2017-01-01

    This monograph analyses in detail the physical aspects of the elastic waves radiation during deformation or fracture of materials. I presents the  methodological bases for the practical use of acoustic emission device, and describes the results of theoretical and experimental researches of evaluation of the crack growth resistance of materials, selection of the useful AE signals. The efficiency of this methodology is shown through the diagnostics of various-purpose industrial objects. The authors obtain results of experimental researches with the help of the new methods and facilities.

  11. An LWR design decision Methodology

    International Nuclear Information System (INIS)

    Leahy, T.J.; Rees, D.C.; Young, J.

    1982-01-01

    While all parties involved in nuclear plant regulation endeavor to make decisions which optimize the considerations of plant safety and financial impacts, these decisions are generally made without the benefit of a systematic and rigorous approach to the questions confronting the decision makers. A Design Decision Methodology has been developed which provides such a systematic approach. By employing this methodology, which makes use of currently accepted probabilistic risk assessment techniques and cost estimation, informed decisions may be made against a background of comparisons between the relative levels of safety and costs associated with various design alternatives

  12. Qualitative methodology in developmental psychology

    DEFF Research Database (Denmark)

    Demuth, Carolin; Mey, Günter

    2015-01-01

    Qualitative methodology presently is gaining increasing recognition in developmental psychology. Although the founders of developmental psychology to a large extent already used qualitative procedures, the field was long dominated by a (post) positivistic quantitative paradigm. The increasing rec...... in qualitative research offers a promising avenue to advance the field in this direction.......Qualitative methodology presently is gaining increasing recognition in developmental psychology. Although the founders of developmental psychology to a large extent already used qualitative procedures, the field was long dominated by a (post) positivistic quantitative paradigm. The increasing...

  13. Observational methodology in sport sciences

    Directory of Open Access Journals (Sweden)

    M. Teresa Anguera

    2013-11-01

    Full Text Available This paper reviews the conceptual framework, the key literature and the methods (observation tools, such as category systems and field formats, and coding software, etc. that should be followed when conducting research from the perspective of observational methodology. The observational designs used by the authors’ research group over the last twenty years are discussed, and the procedures for analysing data and assessing their quality are described. Mention is also made of the latest methodological trends in this field, such as the use of mixed methods.

  14. Reflections on Design Methodology Research

    DEFF Research Database (Denmark)

    2011-01-01

    We shall reflect on the results of Design Methodology research and their impact on design practice. In the past 50 years the number of researchers in the field has expanded enormously – as has the number of publications. During the same period design practice and its products have changed...... and produced are also now far more complex and distributed, putting designers under ever increasing pressure. We shall address the question: Are the results of Design Methodology research appropriate and are they delivering the expected results in design practice? In our attempt to answer this question we...

  15. Muscle dysmorphia: methodological issues, implications for research.

    Science.gov (United States)

    Suffolk, Mark T; Dovey, Terence M; Goodwin, Huw; Meyer, Caroline

    2013-01-01

    Muscle dysmorphia is a male-dominated, body image-related psychological condition. Despite continued investigation, contention surrounds the nosological status of this disorder. The aim of this article was to review the literature on muscle dysmorphia to provide a qualitative account of methodological issues that may inhibit our understanding. Key areas relating to non-standardized participant groups, measuring instruments, and terminology were identified as potentially inhibiting symptom coherence and diagnostic reliability. New measuring instruments validated with clinical samples and carefully described participant groups, standardized terminology, and a greater emphasis on prospective longitudinal research with specific sub groups of the weight training community would be of interest to the field.

  16. Nuclear methodology development for clinical analysis

    International Nuclear Information System (INIS)

    Oliveira, Laura Cristina de

    2003-01-01

    In the present work the viability of using the neutron activation analysis to perform urine and blood clinical analysis was checked. The aim of this study is to investigate the biological behavior of animals that has been fed with chow doped by natural uranium for a long period. Aiming at time and cost reduction, the absolute method was applied to determine element concentration on biological samples. The quantitative results of urine sediment using NAA were compared with the conventional clinical analysis and the results were compatible. This methodology was also used on bone and body organs such as liver and muscles to help the interpretation of possible anomalies. (author)

  17. METHODOLOGY OF PROFESSIONAL PEDAGOGICAL EDUCATION: THEORY AND PRACTICE (theoretical and methodological foundations of vocational teacher education

    Directory of Open Access Journals (Sweden)

    Evgeny M. Dorozhkin

    2014-01-01

    Full Text Available The study is aimed at investigating a justification of the new approach to the problem of vocational education development through the prism of interdependence research methodology and practice. This conceptual setup allows determining the main directions for teacher training modernization of vocational schools. The authors note that the current socio-economic situation in our country has actualized the problem of personnel training. Politicians, economists and scientists’ speeches are all about the shortage of skilled personnel. They see the main reason of this catastrophic situation in the present system of primary and secondary vocational education. At least they concern over the current practice of pedagogical personnel training of vocational education who are to restore the system of vocational education. Our country, Russia has a great positive experience in solving this problem. Scientific-methodological centre for vocational teacher education is the Russian State Vocational Pedagogical University under the scientific direction of Academician of the Russian Academy of Education, G. M. Romantsev. The reflection of scientifictheoretical bases of this education led the authors to the analysis and designing (formation of existent and new professional and pedagogical methodology. Methods. The fundamental position of A. M. Novikov on the generality of the research (scientific and practical activity methodology has become the theoretical platform of the present study. Conceptual field, conceptual statements and professional model are presented as the whole system (or integrating factor. The theoretical framework has determined the logic of the study and its results. Scientific and educational methodology differentiation in terms of the subject of cognitive activity has allowed identifying the main scientific and practical disciplines of vocational teacher education. The creative concept as the subject ground is instrumental analysis of

  18. Methodologic frontiers in environmental epidemiology.

    OpenAIRE

    Rothman, K J

    1993-01-01

    Environmental epidemiology comprises the epidemiologic study of those environmental factors that are outside the immediate control of the individual. Exposures of interest to environmental epidemiologists include air pollution, water pollution, occupational exposure to physical and chemical agents, as well as psychosocial elements of environmental concern. The main methodologic problem in environmental epidemiology is exposure assessment, a problem that extends through all of epidemiologic re...

  19. IMSF: Infinite Methodology Set Framework

    Science.gov (United States)

    Ota, Martin; Jelínek, Ivan

    Software development is usually an integration task in enterprise environment - few software applications work autonomously now. It is usually a collaboration of heterogeneous and unstable teams. One serious problem is lack of resources, a popular result being outsourcing, ‘body shopping’, and indirectly team and team member fluctuation. Outsourced sub-deliveries easily become black boxes with no clear development method used, which has a negative impact on supportability. Such environments then often face the problems of quality assurance and enterprise know-how management. The used methodology is one of the key factors. Each methodology was created as a generalization of a number of solved projects, and each methodology is thus more or less connected with a set of task types. When the task type is not suitable, it causes problems that usually result in an undocumented ad-hoc solution. This was the motivation behind formalizing a simple process for collaborative software engineering. Infinite Methodology Set Framework (IMSF) defines the ICT business process of adaptive use of methods for classified types of tasks. The article introduces IMSF and briefly comments its meta-model.

  20. Unattended Monitoring System Design Methodology

    International Nuclear Information System (INIS)

    Drayer, D.D.; DeLand, S.M.; Harmon, C.D.; Matter, J.C.; Martinez, R.L.; Smith, J.D.

    1999-01-01

    A methodology for designing Unattended Monitoring Systems starting at a systems level has been developed at Sandia National Laboratories. This proven methodology provides a template that describes the process for selecting and applying appropriate technologies to meet unattended system requirements, as well as providing a framework for development of both training courses and workshops associated with unattended monitoring. The design and implementation of unattended monitoring systems is generally intended to respond to some form of policy based requirements resulting from international agreements or domestic regulations. Once the monitoring requirements are established, a review of the associated process and its related facilities enables identification of strategic monitoring locations and development of a conceptual system design. The detailed design effort results in the definition of detection components as well as the supporting communications network and data management scheme. The data analyses then enables a coherent display of the knowledge generated during the monitoring effort. The resultant knowledge is then compared to the original system objectives to ensure that the design adequately addresses the fundamental principles stated in the policy agreements. Implementation of this design methodology will ensure that comprehensive unattended monitoring system designs provide appropriate answers to those critical questions imposed by specific agreements or regulations. This paper describes the main features of the methodology and discusses how it can be applied in real world situations

  1. Environmental Zoning: Some methodological implications

    NARCIS (Netherlands)

    Ike, Paul; Voogd, Henk

    1991-01-01

    The purpose of this article is to discuss some methodological problems of environmental zoning. The principle of environmental zoning will be elaborated. In addition an overview is given of a number of approaches that have been followed in practice to arrive at an integral judgement. Finally some

  2. A methodology for string resolution

    International Nuclear Information System (INIS)

    Karonis, N.T.

    1992-11-01

    In this paper we present a methodology, not a tool. We present this methodology with the intent that it be adopted, on a case by case basis, by each of the existing tools in EPICS. In presenting this methodology, we describe each of its two components in detail and conclude with an example depicting how the methodology can be used across a pair of tools. The task of any control system is to provide access to the various components of the machine being controlled, for example, the Advanced Photon Source (APS). By access, we mean the ability to monitor the machine's status (reading) as well as the ability to explicitly change its status (writing). The Experimental Physics and Industrial Control System (EPICS) is a set of tools, designed to act in concert, that allows one to construct a control system. EPICS provides the ability to construct a control system that allows reading and writing access to the machine. It does this through the notion of databases. Each of the components of the APS that is accessed by the control system is represented in EPICS by a set of named database records. Once this abstraction is made, from physical device to named database records, the process of monitoring and changing the state of that device becomes the simple process of reading and writing information from and to its associated named records

  3. Counting stem cells : methodological constraints

    NARCIS (Netherlands)

    Bystrykh, Leonid V.; Verovskaya, Evgenia; Zwart, Erik; Broekhuis, Mathilde; de Haan, Gerald

    The number of stem cells contributing to hematopoiesis has been a matter of debate. Many studies use retroviral tagging of stem cells to measure clonal contribution. Here we argue that methodological factors can impact such clonal analyses. Whereas early studies had low resolution, leading to

  4. Test reactor risk assessment methodology

    International Nuclear Information System (INIS)

    Jennings, R.H.; Rawlins, J.K.; Stewart, M.E.

    1976-04-01

    A methodology has been developed for the identification of accident initiating events and the fault modeling of systems, including common mode identification, as these methods are applied in overall test reactor risk assessment. The methods are exemplified by a determination of risks to a loss of primary coolant flow in the Engineering Test Reactor

  5. 16 Offsetting deficit conceptualisations: methodological ...

    African Journals Online (AJOL)

    uses the concepts of literacy practices and knowledge recontextualisation to ... 1996, 2000) theory of 'knowledge recontextualisation' in the development of curricula .... cognitive, social and cultural abilities needed to fit in and thrive in the HE learning .... this argument, that a methodology and analytic framework that seeks to ...

  6. Methodology for the case studies

    NARCIS (Netherlands)

    Smits, M.J.W.; Woltjer, G.B.

    2017-01-01

    This document is about the methodology and selection of the case studies. It is meant as a guideline for the case studies, and together with the other reports in this work package can be a source of inform ation for policy officers, interest groups and researchers evaluating or performing impact

  7. Safety at Work : Research Methodology

    NARCIS (Netherlands)

    Beurden, van K. (Karin); Boer, de J. (Johannes); Brinks, G. (Ger); Goering-Zaburnenko, T. (Tatiana); Houten, van Y. (Ynze); Teeuw, W. (Wouter)

    2012-01-01

    In this document, we provide the methodological background for the Safety atWork project. This document combines several project deliverables as defined inthe overall project plan: validation techniques and methods (D5.1.1), performanceindicators for safety at work (D5.1.2), personal protection

  8. Environmental impact statement analysis: dose methodology

    International Nuclear Information System (INIS)

    Mueller, M.A.; Strenge, D.L.; Napier, B.A.

    1981-01-01

    Standardized sections and methodologies are being developed for use in environmental impact statements (EIS) for activities to be conducted on the Hanford Reservation. Five areas for standardization have been identified: routine operations dose methodologies, accident dose methodology, Hanford Site description, health effects methodology, and socioeconomic environment for Hanford waste management activities

  9. A Critique of Methodological Dualism in Education

    Science.gov (United States)

    Yang, Jeong A.; Yoo, Jae-Bong

    2018-01-01

    This paper aims to critically examine the paradigm of methodological dualism and explore whether methodologies in social science currently are appropriate for educational research. There are two primary methodologies for studying education: quantitative and qualitative methods. This is what we mean by "methodological dualism". Is…

  10. Feminist Methodologies and Engineering Education Research

    Science.gov (United States)

    Beddoes, Kacey

    2013-01-01

    This paper introduces feminist methodologies in the context of engineering education research. It builds upon other recent methodology articles in engineering education journals and presents feminist research methodologies as a concrete engineering education setting in which to explore the connections between epistemology, methodology and theory.…

  11. Concept Generation for Design Creativity A Systematized Theory and Methodology

    CERN Document Server

    Taura, Toshiharu

    2013-01-01

    The concept generation process seems like an intuitional thought: difficult to capture and perform, although everyone is capable of it. It is not an analytical process but a synthetic process which has yet to be clarified. Furthermore, new research methods for investigating the concept generation process—a very difficult task since the concept generation process is driven by inner feelings deeply etched in the mind—are necessary to establish its theory and methodology.  Concept Generation for Design Creativity—A Systematized Theory and Methodology presents the concept generation process both theoretically and methodologically. Theoretically, the concept generation process is discussed by comparing metaphor, abduction, and General Design Theory from the perspective of similarities and dissimilarities. Property mapping, concept blending, and concept integration in thematic relation have been explained methodologically. So far, these theories and methods have been discussed independently, and the relation...

  12. Methodology for wind turbine blade geometry optimization

    Energy Technology Data Exchange (ETDEWEB)

    Perfiliev, D.

    2013-11-01

    Nowadays, the upwind three bladed horizontal axis wind turbine is the leading player on the market. It has been found to be the best industrial compromise in the range of different turbine constructions. The current wind industry innovation is conducted in the development of individual turbine components. The blade constitutes 20-25% of the overall turbine budget. Its optimal operation in particular local economic and wind conditions is worth investigating. The blade geometry, namely the chord, twist and airfoil type distributions along the span, responds to the output measures of the blade performance. Therefore, the optimal wind blade geometry can improve the overall turbine performance. The objectives of the dissertation are focused on the development of a methodology and specific tool for the investigation of possible existing wind blade geometry adjustments. The novelty of the methodology presented in the thesis is the multiobjective perspective on wind blade geometry optimization, particularly taking simultaneously into account the local wind conditions and the issue of aerodynamic noise emissions. The presented optimization objective approach has not been investigated previously for the implementation in wind blade design. The possibilities to use different theories for the analysis and search procedures are investigated and sufficient arguments derived for the usage of proposed theories. The tool is used for the test optimization of a particular wind turbine blade. The sensitivity analysis shows the dependence of the outputs on the provided inputs, as well as its relative and absolute divergences and instabilities. The pros and cons of the proposed technique are seen from the practical implementation, which is documented in the results, analysis and conclusion sections. (orig.)

  13. Methodologies of Uncertainty Propagation Calculation

    International Nuclear Information System (INIS)

    Chojnacki, Eric

    2002-01-01

    After recalling the theoretical principle and the practical difficulties of the methodologies of uncertainty propagation calculation, the author discussed how to propagate input uncertainties. He said there were two kinds of input uncertainty: - variability: uncertainty due to heterogeneity, - lack of knowledge: uncertainty due to ignorance. It was therefore necessary to use two different propagation methods. He demonstrated this in a simple example which he generalised, treating the variability uncertainty by the probability theory and the lack of knowledge uncertainty by the fuzzy theory. He cautioned, however, against the systematic use of probability theory which may lead to unjustifiable and illegitimate precise answers. Mr Chojnacki's conclusions were that the importance of distinguishing variability and lack of knowledge increased as the problem was getting more and more complex in terms of number of parameters or time steps, and that it was necessary to develop uncertainty propagation methodologies combining probability theory and fuzzy theory

  14. Multicriteria methodology for decision aiding

    CERN Document Server

    Roy, Bernard

    1996-01-01

    This is the first comprehensive book to present, in English, the multicriteria methodology for decision aiding In the foreword the distinctive features and main ideas of the European School of MCDA are outlined The twelve chapters are essentially expository in nature, but scholarly in treatment Some questions, which are too often neglected in the literature on decision theory, such as how is a decision made, who are the actors, what is a decision aiding model, how to define the set of alternatives, are discussed Examples are used throughout the book to illustrate the various concepts Ways to model the consequences of each alternative and building criteria taking into account the inevitable imprecisions, uncertainties and indeterminations are described and illustrated The three classical operational approaches of MCDA synthesis in one criterion (including MAUT), synthesis by outranking relations, interactive local judgements, are studied This methodology tries to be a theoretical or intellectual framework dire...

  15. AGR core safety assessment methodologies

    International Nuclear Information System (INIS)

    McLachlan, N.; Reed, J.; Metcalfe, M.P.

    1996-01-01

    To demonstrate the safety of its gas-cooled graphite-moderated AGR reactors, nuclear safety assessments of the cores are based upon a methodology which demonstrates no component failures, geometrical stability of the structure and material properties bounded by a database. All AGRs continue to meet these three criteria. However, predictions of future core behaviour indicate that the safety case methodology will eventually need to be modified to deal with new phenomena. A new approach to the safety assessment of the cores is currently under development, which can take account of these factors while at the same time providing the same level of protection for the cores. This approach will be based on the functionality of the core: unhindered movement of control rods, continued adequate cooling of the fuel and the core, continued ability to charge and discharge fuel. (author). 5 figs

  16. Methodological update in Medicina Intensiva.

    Science.gov (United States)

    García Garmendia, J L

    2018-04-01

    Research in the critically ill is complex by the heterogeneity of patients, the difficulties to achieve representative sample sizes and the number of variables simultaneously involved. However, the quantity and quality of records is high as well as the relevance of the variables used, such as survival. The methodological tools have evolved to offering new perspectives and analysis models that allow extracting relevant information from the data that accompanies the critically ill patient. The need for training in methodology and interpretation of results is an important challenge for the intensivists who wish to be updated on the research developments and clinical advances in Intensive Medicine. Copyright © 2017 Elsevier España, S.L.U. y SEMNIM. All rights reserved.

  17. Methodology for building confidence measures

    Science.gov (United States)

    Bramson, Aaron L.

    2004-04-01

    This paper presents a generalized methodology for propagating known or estimated levels of individual source document truth reliability to determine the confidence level of a combined output. Initial document certainty levels are augmented by (i) combining the reliability measures of multiply sources, (ii) incorporating the truth reinforcement of related elements, and (iii) incorporating the importance of the individual elements for determining the probability of truth for the whole. The result is a measure of confidence in system output based on the establishing of links among the truth values of inputs. This methodology was developed for application to a multi-component situation awareness tool under development at the Air Force Research Laboratory in Rome, New York. Determining how improvements in data quality and the variety of documents collected affect the probability of a correct situational detection helps optimize the performance of the tool overall.

  18. Mo(ve)ment-methodology

    DEFF Research Database (Denmark)

    Mørck, Line Lerche; Christian Celosse-Andersen, Martin

    2018-01-01

    This paper describes the theoretical basis for and development of a moment-movement research methodology, based on an integration of critical psychological practice research and critical ethnographic social practice theory. Central theoretical conceptualizations, such as human agency, life...... conditions and identity formation, are discussed in relation to criminological theories of gang desistance. The paper illustrates how the mo(ve)ment methodology was applied in a study of comprehensive processes of identity (re)formation and gang exit processes. This study was conducted with Martin, a former....... This is a moment which captures Martin’s complex and ambiguous feelings of conflictual concerns, frustration, anger, and a new feeling of insecurity in his masculinity, as well as engagement and a sense of deep meaningfulness as he becomes a more reflective academic. All these conflicting feelings also give...

  19. Design methodology of Dutch banknotes

    Science.gov (United States)

    de Heij, Hans A. M.

    2000-04-01

    Since the introduction of a design methodology for Dutch banknotes, the quality of Dutch paper currency has improved in more than one way. The methodology is question provides for (i) a design policy, which helps fix clear objectives; (ii) design management, to ensure a smooth cooperation between the graphic designer, printer, papermaker an central bank, (iii) a program of requirements, a banknote development guideline for all parties involved. This systematic approach enables an objective selection of design proposals, including security features. Furthermore, the project manager obtains regular feedback from the public by conducting market surveys. Each new design of a Netherlands Guilder banknote issued by the Nederlandsche Bank of the past 50 years has been an improvement on its predecessor in terms of value recognition, security and durability.

  20. Workshops as a Research Methodology

    DEFF Research Database (Denmark)

    Ørngreen, Rikke; Levinsen, Karin Tweddell

    2017-01-01

    , and workshops as a research methodology. Focusing primarily on the latter, this paper presents five studies on upper secondary and higher education teachers’ professional development and on teaching and learning through video conferencing. Through analysis and discussion of these studies’ findings, we argue......This paper contributes to knowledge on workshops as a research methodology, and specifically on how such workshops pertain to e-learning. A literature review illustrated that workshops are discussed according to three different perspectives: workshops as a means, workshops as practice...... that workshops provide a platform that can aid researchers in identifying and exploring relevant factors in a given domain by providing means for understanding complex work and knowledge processes that are supported by technology (for example, e-learning). The approach supports identifying factors...

  1. Methodological challenges and lessons learned

    DEFF Research Database (Denmark)

    Nielsen, Poul Erik; Gustafsson, Jessica

    2017-01-01

    Taking as point of departure three recently conducted empirical studies, the aim of this article is to theoretically and empirically discuss methodological challenges studying the interrelations between media and social reality and to critically reflect on the methodologies used in the studies....... By deconstructing the studies, the article draws attention to the fact that different methods are able to grasp different elements of social reality. Moreover, by analysing the power relations at play, the article demonstrated that the interplay between interviewer and interviewee, and how both parties fit...... into present power structures, greatly influence the narratives that are co-produced during interviews. The article thus concludes that in order to fully understand complex phenomena it is not just enough to use a mixture of methods, the makeup of the research team is also imperative, as a diverse team...

  2. Implementation impacts of PRL methodology

    International Nuclear Information System (INIS)

    Caudill, J.A.; Krupa, J.F.; Meadors, R.E.; Odum, J.V.; Rodrigues, G.C.

    1993-02-01

    This report responds to a DOE-SR request to evaluate the impacts from implementation of the proposed Plutonium Recovery Limit (PRL) methodology. The PRL Methodology is based on cost minimization for decisions to discard or recover plutonium contained in scrap, residues, and other plutonium bearing materials. Implementation of the PRL methodology may result in decisions to declare as waste certain plutonium bearing materials originally considered to be a recoverable plutonium product. Such decisions may have regulatory impacts, because any material declared to be waste would immediately be subject to provisions of the Resource Conservation and Recovery Act (RCRA). The decision to discard these materials will have impacts on waste storage, treatment, and disposal facilities. Current plans for the de-inventory of plutonium processing facilities have identified certain materials as candidates for discard based upon the economic considerations associated with extending the operating schedules for recovery of the contained plutonium versus potential waste disposal costs. This report evaluates the impacts of discarding those materials as proposed by the F Area De-Inventory Plan and compares the De-Inventory Plan assessments with conclusions from application of the PRL. The impact analysis was performed for those materials proposed as potential candidates for discard by the De-Inventory Plan. The De-Inventory Plan identified 433 items, containing approximately 1% of the current SRS Pu-239 inventory, as not appropriate for recovery as the site moves to complete the mission of F-Canyon and FB-Line. The materials were entered into storage awaiting recovery as product under the Department's previous Economic Discard Limit (EDL) methodology which valued plutonium at its incremental cost of production in reactors. An application of Departmental PRLs to the subject 433 items revealed that approximately 40% of them would continue to be potentially recoverable as product plutonium

  3. ISE System Development Methodology Manual

    Energy Technology Data Exchange (ETDEWEB)

    Hayhoe, G.F.

    1992-02-17

    The Information Systems Engineering (ISE) System Development Methodology Manual (SDM) is a framework of life cycle management guidelines that provide ISE personnel with direction, organization, consistency, and improved communication when developing and maintaining systems. These guide-lines were designed to allow ISE to build and deliver Total Quality products, and to meet the goals and requirements of the US Department of Energy (DOE), Westinghouse Savannah River Company, and Westinghouse Electric Corporation.

  4. Environmental Testing Methodology in Biometrics

    OpenAIRE

    Fernández Saavedra, Belén; Sánchez Reíllo, Raúl; Alonso Moreno, Raúl; Miguel Hurtado, Óscar

    2010-01-01

    8 pages document + 5-slide presentation.-- Contributed to: 1st International Biometric Performance Conference (IBPC 2010, NIST, Gaithersburg, MD, US, Mar 1-5, 2010). Recently, biometrics is used in many security systems and these systems can be located in different environments. As many experts claim and previous works have demonstrated, environmental conditions influence biometric performance. Nevertheless, there is not a specific methodology for testing this influence at the moment...

  5. Soft systems methodology: other voices

    OpenAIRE

    Holwell, Sue

    2000-01-01

    This issue of Systemic Practice and Action Research, celebrating the work of Peter Checkland, in the particular nature and development of soft systems methodology (SSM), would not have happened unless the work was seen by others as being important. No significant contribution to thinking happens without a secondary literature developing. Not surprisingly, many commentaries have accompanied the ongoing development of SSM. Some of these are insightful, some full of errors, and some include both...

  6. Systems engineering agile design methodologies

    CERN Document Server

    Crowder, James A

    2013-01-01

    This book examines the paradigm of the engineering design process. The authors discuss agile systems and engineering design. The book captures the entire design process (functionbases), context, and requirements to affect real reuse. It provides a methodology for an engineering design process foundation for modern and future systems design. This book captures design patterns with context for actual Systems Engineering Design Reuse and contains a new paradigm in Design Knowledge Management.

  7. Methodological remarks on contraction theory

    DEFF Research Database (Denmark)

    Jouffroy, Jerome; Slotine, Jean-Jacques E.

    Because contraction analysis stems from a differential and incremental framework, the nature and methodology of contraction-based proofs are significantly different from those of their Lyapunov-based counterparts. This paper specifically studies this issue, and illustrates it by revisiting some c...... classical examples traditionally addressed using Lyapunov theory. Even in these cases, contraction tools can often yield significantly simplified analysis. The examples include adaptive control, robotics, and a proof of convergence of the deterministic Extended Kalman Filter....

  8. Artificial Intelligence Techniques and Methodology

    OpenAIRE

    Carbonell, Jaime G.; Sleeman, Derek

    1982-01-01

    Two closely related aspects of artificial intelligence that have received comparatively little attention in the recent literature are research methodology, and the analysis of computational techniques that span multiple application areas. We believe both issues to be increasingly significant as Artificial Intelligence matures into a science and spins off major application efforts. It is imperative to analyze the repertoire of AI methods with respect to past experience, utility in new domains,...

  9. Developing Foucault's Discourse Analytic Methodology

    Directory of Open Access Journals (Sweden)

    Rainer Diaz-Bone

    2006-01-01

    Full Text Available A methodological position for a FOUCAULTian discourse analysis is presented. A sequence of analytical steps is introduced and an illustrating example is offered. It is emphasized that discourse analysis has to discover the system-level of discursive rules and the deeper structure of the discursive formation. Otherwise the analysis will be unfinished. Michel FOUCAULTs work is theoretically grounded in French structuralism and (the so called post-structuralism. In this paper, post-structuralism is not conceived as a means for overcoming of structuralism, but as a way of critically continuing the structural perspective. In this way, discursive structures can be related to discursive practices and the concept of structure can be disclosed (e. g. to inter-discourse or DERRIDAs concept of structurality. In this way, the structural methodology is continued and radicalized, but not given up. In this paper, FOUCAULTs theory is combined with the works of Michel PÊCHEUX and (especially for the sociology of knowledge and the sociology of culture Pierre BOURDIEU. The practice of discourse analysis is theoretically grounded. This practice can be conceived as a reflexive coupling of deconstruction and reconstruction in the material to be analyzed. This methodology therefore can be characterized as a reconstructive qualitative methodology. At the end of the article, forms of discourse analysis are criticized that do not intend to recover the system level of discursive rules and that do not intend to discover the deeper structure of the discursive formation (i. e. episteme, socio-episteme. These forms merely are commentaries of discourses (not their analyses, they remain phenomenological and are therefore: pre-structuralist. URN: urn:nbn:de:0114-fqs060168

  10. Energy Efficiency Indicators Methodology Booklet

    Energy Technology Data Exchange (ETDEWEB)

    Sathaye, Jayant; Price, Lynn; McNeil, Michael; de la rue du Can, Stephane

    2010-05-01

    This Methodology Booklet provides a comprehensive review and methodology guiding principles for constructing energy efficiency indicators, with illustrative examples of application to individual countries. It reviews work done by international agencies and national government in constructing meaningful energy efficiency indicators that help policy makers to assess changes in energy efficiency over time. Building on past OECD experience and best practices, and the knowledge of these countries' institutions, relevant sources of information to construct an energy indicator database are identified. A framework based on levels of hierarchy of indicators -- spanning from aggregate, macro level to disaggregated end-use level metrics -- is presented to help shape the understanding of assessing energy efficiency. In each sector of activity: industry, commercial, residential, agriculture and transport, indicators are presented and recommendations to distinguish the different factors affecting energy use are highlighted. The methodology booklet addresses specifically issues that are relevant to developing indicators where activity is a major factor driving energy demand. A companion spreadsheet tool is available upon request.

  11. Software engineering methodologies and tools

    Science.gov (United States)

    Wilcox, Lawrence M.

    1993-01-01

    Over the years many engineering disciplines have developed, including chemical, electronic, etc. Common to all engineering disciplines is the use of rigor, models, metrics, and predefined methodologies. Recently, a new engineering discipline has appeared on the scene, called software engineering. For over thirty years computer software has been developed and the track record has not been good. Software development projects often miss schedules, are over budget, do not give the user what is wanted, and produce defects. One estimate is there are one to three defects per 1000 lines of deployed code. More and more systems are requiring larger and more complex software for support. As this requirement grows, the software development problems grow exponentially. It is believed that software quality can be improved by applying engineering principles. Another compelling reason to bring the engineering disciplines to software development is productivity. It has been estimated that productivity of producing software has only increased one to two percent a year in the last thirty years. Ironically, the computer and its software have contributed significantly to the industry-wide productivity, but computer professionals have done a poor job of using the computer to do their job. Engineering disciplines and methodologies are now emerging supported by software tools that address the problems of software development. This paper addresses some of the current software engineering methodologies as a backdrop for the general evaluation of computer assisted software engineering (CASE) tools from actual installation of and experimentation with some specific tools.

  12. Methodology for technical risk assessment

    International Nuclear Information System (INIS)

    Waganer, L.M.; Zuckerman, D.S.

    1983-01-01

    A methodology has been developed for and applied to the assessment of the technical risks associated with an evolving technology. This methodology, originally developed for fusion by K. W. Billman and F. R. Scott at EPRI, has been applied to assess the technical risk of a fuel system for a fusion reactor. Technical risk is defined as the risk that a particular technology or component which is currently under development will not achieve a set of required technical specifications (i.e. probability of failure). The individual steps in the technical risk assessment are summarized. The first step in this methodology is to clearly and completely quantify the technical requirements for the particular system being examined. The next step is to identify and define subsystems and various options which appear capable of achieving the required technical performance. The subsystem options are then characterized regarding subsystem functions, interface requirements with the subsystems and systems, important components, developmental obstacles and technical limitations. Key technical subsystem performance parameters are identified which directly or indirectly relate to the system technical specifications. Past, existing and future technical performance data from subsystem experts are obtained by using a Bayesian Interrogation technique. The input data is solicited in the form of probability functions. Thus the output performance of the system is expressed as probability functions

  13. Methodology for astronaut reconditioning research.

    Science.gov (United States)

    Beard, David J; Cook, Jonathan A

    2017-01-01

    Space medicine offers some unique challenges, especially in terms of research methodology. A specific challenge for astronaut reconditioning involves identification of what aspects of terrestrial research methodology hold and which require modification. This paper reviews this area and presents appropriate solutions where possible. It is concluded that spaceflight rehabilitation research should remain question/problem driven and is broadly similar to the terrestrial equivalent on small populations, such as rare diseases and various sports. Astronauts and Medical Operations personnel should be involved at all levels to ensure feasibility of research protocols. There is room for creative and hybrid methodology but careful systematic observation is likely to be more achievable and fruitful than complex trial based comparisons. Multi-space agency collaboration will be critical to pool data from small groups of astronauts with the accepted use of standardised outcome measures across all agencies. Systematic reviews will be an essential component. Most limitations relate to the inherent small sample size available for human spaceflight research. Early adoption of a co-operative model for spaceflight rehabilitation research is therefore advised. Copyright © 2016 Elsevier Ltd. All rights reserved.

  14. Methodology for ranking restoration options

    International Nuclear Information System (INIS)

    Hedemann Jensen, Per

    1999-04-01

    The work described in this report has been performed as a part of the RESTRAT Project FI4P-CT95-0021a (PL 950128) co-funded by the Nuclear Fission Safety Programme of the European Commission. The RESTRAT project has the overall objective of developing generic methodologies for ranking restoration techniques as a function of contamination and site characteristics. The project includes analyses of existing remediation methodologies and contaminated sites, and is structured in the following steps: characterisation of relevant contaminated sites; identification and characterisation of relevant restoration techniques; assessment of the radiological impact; development and application of a selection methodology for restoration options; formulation of generic conclusions and development of a manual. The project is intended to apply to situations in which sites with nuclear installations have been contaminated with radioactive materials as a result of the operation of these installations. The areas considered for remedial measures include contaminated land areas, rivers and sediments in rivers, lakes, and sea areas. Five contaminated European sites have been studied. Various remedial measures have been envisaged with respect to the optimisation of the protection of the populations being exposed to the radionuclides at the sites. Cost-benefit analysis and multi-attribute utility analysis have been applied for optimisation. Health, economic and social attributes have been included and weighting factors for the different attributes have been determined by the use of scaling constants. (au)

  15. Prioritization methodology for chemical replacement

    Science.gov (United States)

    Cruit, Wendy; Goldberg, Ben; Schutzenhofer, Scott

    1995-01-01

    Since United States of America federal legislation has required ozone depleting chemicals (class 1 & 2) to be banned from production, The National Aeronautics and Space Administration (NASA) and industry have been required to find other chemicals and methods to replace these target chemicals. This project was initiated as a development of a prioritization methodology suitable for assessing and ranking existing processes for replacement 'urgency.' The methodology was produced in the form of a workbook (NASA Technical Paper 3421). The final workbook contains two tools, one for evaluation and one for prioritization. The two tools are interconnected in that they were developed from one central theme - chemical replacement due to imposed laws and regulations. This workbook provides matrices, detailed explanations of how to use them, and a detailed methodology for prioritization of replacement technology. The main objective is to provide a GUIDELINE to help direct the research for replacement technology. The approach for prioritization called for a system which would result in a numerical rating for the chemicals and processes being assessed. A Quality Function Deployment (QFD) technique was used in order to determine numerical values which would correspond to the concerns raised and their respective importance to the process. This workbook defines the approach and the application of the QFD matrix. This technique: (1) provides a standard database for technology that can be easily reviewed, and (2) provides a standard format for information when requesting resources for further research for chemical replacement technology. Originally, this workbook was to be used for Class 1 and Class 2 chemicals, but it was specifically designed to be flexible enough to be used for any chemical used in a process (if the chemical and/or process needs to be replaced). The methodology consists of comparison matrices (and the smaller comparison components) which allow replacement technology

  16. The fractional scaling methodology (FSM) Part 1. methodology development

    International Nuclear Information System (INIS)

    Novak Zuber; Ivan Catton; Upendra S Rohatgi; Wolfgang Wulff

    2005-01-01

    Full text of publication follows: a quantitative methodology is developed, based on the concepts of hierarchy and synthesis, to integrate and organize information and data. The methodology uses scaling to synthesize experimental data and analytical results, and to provide quantitative criteria for evaluating the effects of various design and operating parameters that influence processes in a complex system such as a nuclear power plant or a related test facility. Synthesis and scaling are performed on three hierarchical levels: the process, component and system levels. Scaling on the process level determines the effect of a selected process on a particular state variable during a selected scenario. At the component level this scaling determines the effects various processes have on a state variable, and it ranks the processes according to their importance by the magnitude of the fractional change they cause on that state variable. At the system level the scaling determines the governing processes and corresponding components, ranking these in the order of importance according to their effect on the fractional change of system-wide state variables. The scaling methodology reveals on all levels the fractional change of state variables and is called therefore the Fractional Scaling Methodology (FSM). FSM synthesizes process parameters and assigns to each thermohydraulic process a dimensionless effect metric Ω = ωt, that is the product of the specific rate of fractional change ω and the characteristic time t. The rate of fractional change ω is the ratio of process transport rate over content of a preserved quantity in a component. The effect metric Ω quantifies the contribution of the process to the fractional change of a state variable in a given component. Ordering of a component effect metrics provides the hierarchy of processes in a component, then in all components and the system. FSM separates quantitatively dominant from minor processes and components and

  17. Orton-Gillingham Methodology for Students with Reading Disabilities: 30 Years of Case Law

    Science.gov (United States)

    Rose, Tessie E.; Zirkel, Perry

    2007-01-01

    Although numerous studies have investigated autism methodology case law, few studies have investigated case law regarding reading methodology, particularly the Orton-Gillingham approach, for students with reading disabilities. We provide the results of a systematic case analysis of all published Orton-Gillingham decisions from the original passage…

  18. Practical Issues of Conducting a Q Methodology Study: Lessons Learned From a Cross-cultural Study.

    Science.gov (United States)

    Stone, Teresa Elizabeth; Maguire, Jane; Kang, Sook Jung; Cha, Chiyoung

    This article advances nursing research by presenting the methodological challenges experienced in conducting a multination Q-methodology study. This article critically analyzes the relevance of the methodology for cross-cultural and nursing research and the challenges that led to specific responses by the investigators. The use of focus groups with key stakeholders supplemented the Q-analysis results. The authors discuss practical issues and shared innovative approaches and provide best-practice suggestions on the use of this flexible methodology. Q methodology has the versatility to explore complexities of contemporary nursing practice and cross-cultural health research.

  19. How to emerge from the conservatism in clinical research methodology?

    Science.gov (United States)

    Kotecki, Nuria; Penel, Nicolas; Awada, Ahmad

    2017-09-01

    Despite recent changes in clinical research methodology, many challenges remain in drug development methodology. Advances in molecular biology and cancer treatments have changed the clinical research landscape. Thus, we moved from empirical clinical oncology to molecular and immunological therapeutic approaches. Along with this move, adapted dose-limiting toxicities definitions, endpoints, and dose escalation methods have been proposed. Moreover, the classical frontier between phase I, phase II, and phase III has become unclear in particular for immunological approaches. So, investigators are facing major challenges in drug development methodology. We propose to individualize clinical research using innovative approaches to significantly improve patient outcomes and targeting what is considered unmet need. Integrating high level of translational research and performing well designed biomarker studies with great potential for clinical practice are of utmost importance. This could be performed within new models of clinical research networks and by building a strong collaboration between academic, cooperative groups, on-site investigators, and pharma.

  20. Research methodological issues in evaluating herbal interventions

    Directory of Open Access Journals (Sweden)

    Dipika Bansal

    2010-02-01

    Full Text Available Dipika Bansal, Debasish Hota, Amitava ChakrabartiPostgraduate Institute of Medical Education and Research, Chandigarh, IndiaAbstract: Randomized controlled trials provide the best evidence, and is seen as the gold standard for allopathic research. Herbal therapies are not an integral part of conventional care although they are still used by patients in their health care management. These medicines need to be subjected to rigorous research to establish their effectiveness and safety. Clearly defined treatments are required and should be recorded in a manner that enables other suitably trained researchers to reproduce them reliably. Quality control of herbal products is also a prerequisite of credible clinical trials. Methodological strategies for investigating the herbal interventions and the issues regarding appropriate patient selection, randomization and blinding, placebo effects and choice of comparator, occupational standardization and the selection of appropriate study endpoints to prove efficacy are being discussed. This paper will review research options and propose some suggestions for future research design.Keywords: CAM research, herbal therapies, methodology, clinical trial

  1. Bayesian methodology for reliability model acceptance

    International Nuclear Information System (INIS)

    Zhang Ruoxue; Mahadevan, Sankaran

    2003-01-01

    This paper develops a methodology to assess the reliability computation model validity using the concept of Bayesian hypothesis testing, by comparing the model prediction and experimental observation, when there is only one computational model available to evaluate system behavior. Time-independent and time-dependent problems are investigated, with consideration of both cases: with and without statistical uncertainty in the model. The case of time-independent failure probability prediction with no statistical uncertainty is a straightforward application of Bayesian hypothesis testing. However, for the life prediction (time-dependent reliability) problem, a new methodology is developed in this paper to make the same Bayesian hypothesis testing concept applicable. With the existence of statistical uncertainty in the model, in addition to the application of a predictor estimator of the Bayes factor, the uncertainty in the Bayes factor is explicitly quantified through treating it as a random variable and calculating the probability that it exceeds a specified value. The developed method provides a rational criterion to decision-makers for the acceptance or rejection of the computational model

  2. Methodology for allocating reliability and risk

    International Nuclear Information System (INIS)

    Cho, N.Z.; Papazoglou, I.A.; Bari, R.A.

    1986-05-01

    This report describes a methodology for reliability and risk allocation in nuclear power plants. The work investigates the technical feasibility of allocating reliability and risk, which are expressed in a set of global safety criteria and which may not necessarily be rigid, to various reactor systems, subsystems, components, operations, and structures in a consistent manner. The report also provides general discussions on the problem of reliability and risk allocation. The problem is formulated as a multiattribute decision analysis paradigm. The work mainly addresses the first two steps of a typical decision analysis, i.e., (1) identifying alternatives, and (2) generating information on outcomes of the alternatives, by performing a multiobjective optimization on a PRA model and reliability cost functions. The multiobjective optimization serves as the guiding principle to reliability and risk allocation. The concept of ''noninferiority'' is used in the multiobjective optimization problem. Finding the noninferior solution set is the main theme of the current approach. The final step of decision analysis, i.e., assessment of the decision maker's preferences could then be performed more easily on the noninferior solution set. Some results of the methodology applications to a nontrivial risk model are provided, and several outstanding issues such as generic allocation, preference assessment, and uncertainty are discussed. 29 refs., 44 figs., 39 tabs

  3. Hybrid Risk Management Methodology: A Case Study

    Directory of Open Access Journals (Sweden)

    Jacky Siu-Lun Ting

    2009-10-01

    Full Text Available Risk management is a decision-making process involving considerations of political, social, economic and engineering factors with relevant risk assessments relating to a potential hazard. In the last decade, a number of risk management tools are introduced and employed to manage and minimize the uncertainty and threats realization to the organizations. However, the focus of these methodologies are different; in which companies need to adopt various risk management principles to visualize a full picture of the organizational risk level. Regarding to this, this paper presents a new approach of risk management that integrates Hierarchical Holographic Modeling (HHM, Enterprise Risk Management (ERM and Business Recovery Planning (BCP for identifying and assessing risks as well as managing the consequences of realized residual risks. To illustrate the procedures of the proposed methodology, a logistic company ABC Limited is chosen to serve as a case study Through applying HHM and ERM to investigate and assess the risk, ABC Limited can be better evaluated the potential risks and then took the responsive actions (e.g. BCP to handle the risks and crisis in near future.

  4. Methodologic assessment of radiation epidemiology studies

    International Nuclear Information System (INIS)

    Beebe, G.W.

    1983-01-01

    Epidemiologic studies of the late effects of ionizing radiation have utilized the entire spectrum of situations in which man has been exposed. These studies have provided insights into the dependence of human effects upon not only dose to target tissues but also other dimensions of exposure, host characteristics, and time following exposure. Over the past three decades studies have progressed from the mere identification of effects to their measurement. Because investigators of human effects have no control over the exposure situation, validity must be sought in the consistency of findings among independent studies and with accepted biologic principles. Because exposure may be confounded with factors that are hidden from view, bias may enter into any study of human exposure. Avoidance of bias and attainment of sufficient power to detect relationships that are real are methodologic challenges. Many methodologic issues, e.g., those associated with the definition and measurement of specific end-points, or with the selection of appropriate controls, permeate epidemiologic work in all fields. Others, especially those concerned with the measurement of exposure, the patterning of events in time after exposure, and the prediction of events beyond the scope of existing observations give radiation epidemiology its distinctive character

  5. Application of a methodology for retouching

    Directory of Open Access Journals (Sweden)

    Ana Bailão

    2010-11-01

    Full Text Available Between November 2006 and January 2010, an investigation into retouching methodologies was carried out. The aim of this paper is to describe, in four steps, the retouching methodology of a contemporary painting. The four steps are: chromatic and formal study, considering the use of Gestalt theory and the phenomena of contrast and assimilation; selection of the technique; choice of the materials and retouching practice.Entre Novembre 2006 et Janvier 2010, nous avons fait une recherche dans le cadre du programme de Maitrise sur la méthodologie et les techniques de retouche. Le but de cet article est la description, en quatre étapes, de la méthodologie de retouche d’une peinture contemporaine. Les quatre étapes sont: étude chromatique et formelle, avec l’utilisation de la théorie de la Gestalt et des phénomènes de contraste et assimilation, la sélection de la technique, le choix des matériaux et la pratique de retouche. 

  6. Radioisotope methodology course radioprotection aspects

    International Nuclear Information System (INIS)

    Bergoc, R.M.; Caro, R.A.; Menossi, C.A.

    1996-01-01

    The advancement knowledge in molecular and cell biology, biochemistry, medicine and pharmacology, which has taken place during the last 50 years, after World War II finalization, is really outstanding. It can be safely said that this fact is principally due to the application of radioisotope techniques. The research on metabolisms, biodistribution of pharmaceuticals, pharmacodynamics, etc., is mostly carried out by means of techniques employing radioactive materials. Radioisotopes and radiation are frequently used in medicine both as diagnostic and therapeutic tools. The radioimmunoanalysis is today a routine method in endocrinology and in general clinical medicine. The receptor determination and characterization is a steadily growing methodology used in clinical biochemistry, pharmacology and medicine. The use of radiopharmaceuticals and radiation of different origins, for therapeutic purposes, should not be overlooked. For these reasons, the importance to teach radioisotope methodology is steadily growing. This is principally the case for specialization at the post-graduate level but at the pre graduate curriculum it is worthwhile to give some elementary theoretical and practical notions on this subject. These observations are justified by a more than 30 years teaching experience at both levels at the School of Pharmacy and Biochemistry of the University of Buenos Aires, Argentina. In 1960 we began to teach Physics III, an obligatory pregraduate course for biochemistry students, in which some elementary notions of radioactivity and measurement techniques were given. Successive modifications of the biochemistry pregraduate curriculum incorporated radiochemistry as an elective subject and since 1978, radioisotope methodology, as obligatory subject for biochemistry students. This subject is given at the radioisotope laboratory during the first semester of each year and its objective is to provide theoretical and practical knowledge to the biochemistry students, even

  7. Qualitative case study methodology in nursing research: an integrative review.

    Science.gov (United States)

    Anthony, Susan; Jack, Susan

    2009-06-01

    This paper is a report of an integrative review conducted to critically analyse the contemporary use of qualitative case study methodology in nursing research. Increasing complexity in health care and increasing use of case study in nursing research support the need for current examination of this methodology. In 2007, a search for case study research (published 2005-2007) indexed in the CINAHL, MEDLINE, EMBASE, PsychINFO, Sociological Abstracts and SCOPUS databases was conducted. A sample of 42 case study research papers met the inclusion criteria. Whittemore and Knafl's integrative review method guided the analysis. Confusion exists about the name, nature and use of case study. This methodology, including terminology and concepts, is often invisible in qualitative study titles and abstracts. Case study is an exclusive methodology and an adjunct to exploring particular aspects of phenomena under investigation in larger or mixed-methods studies. A high quality of case study exists in nursing research. Judicious selection and diligent application of literature review methods promote the development of nursing science. Case study is becoming entrenched in the nursing research lexicon as a well-accepted methodology for studying phenomena in health and social care, and its growing use warrants continued appraisal to promote nursing knowledge development. Attention to all case study elements, process and publication is important in promoting authenticity, methodological quality and visibility.

  8. Methodologies for tracking learning paths

    DEFF Research Database (Denmark)

    Frølunde, Lisbeth; Gilje, Øystein; Lindstrand, Fredrik

    2009-01-01

    filmmakers: what furthers their interest and/or hinders it, and what learning patterns emerge. The aim of this article is to present and discuss issues regarding the methodology and meth- ods of the study, such as developing a relationship with interviewees when conducting inter- views online (using MSN). We...... suggest two considerations about using online interviews: how the interviewees value the given subject of conversation and their familiarity with being online. The benefit of getting online communication with the young filmmakers offers ease, because it is both practical and appropriates a meeting...

  9. Chapter three: methodology of exposure modeling

    CSIR Research Space (South Africa)

    Moschandreas, DJ

    2002-12-01

    Full Text Available methodologies and models are reviewed. Three exposure/measurement methodologies are assessed. Estimation methods focus on source evaluation and attribution, sources include those outdoors and indoors as well as in occupational and in-transit environments. Fate...

  10. Methodological Issues and Practices in Qualitative Research.

    Science.gov (United States)

    Bradley, Jana

    1993-01-01

    Discusses methodological issues concerning qualitative research and describes research practices that qualitative researchers use to address these methodological issues. Topics discussed include the researcher as interpreter, the emergent nature of qualitative research, understanding the experience of others, trustworthiness in qualitative…

  11. Audit Methodology for IT Governance

    Directory of Open Access Journals (Sweden)

    Mirela GHEORGHE

    2010-01-01

    Full Text Available The continuous development of the new IT technologies was followed up by a rapid integration of them at the organization level. The management of the organizations face a new challenge: structural redefinition of the IT component in order to create plus value and to minimize IT risks through an efficient management of all IT resources of the organization. These changes have had a great impact on the governance of the IT component. The paper proposes an audit methodology of the IT Governance at the organization level. From this point of view the developed audit strategy is a strategy based on risks to enable IT auditor to study from the best angle efficiency and effectiveness of the IT Governance structure. The evaluation of the risks associated with IT Governance is a key process in planning the audit mission which will allow the identification of the segments with increased risks. With now ambition for completeness, the proposed methodology provides the auditor a useful tool in the accomplishment of his mission.

  12. Methodology of Credit Analysis Development

    Directory of Open Access Journals (Sweden)

    Slađana Neogradi

    2017-12-01

    Full Text Available The subject of research presented in this paper refers to the definition of methodology for the development of credit analysis in companies and its application in lending operations in the Republic of Serbia. With the developing credit market, there is a growing need for a well-developed risk and loss prevention system. In the introduction the process of bank analysis of the loan applicant is presented in order to minimize and manage the credit risk. By examining the subject matter, the process of processing the credit application is described, the procedure of analyzing the financial statements in order to get an insight into the borrower's creditworthiness. In the second part of the paper, the theoretical and methodological framework is presented applied in the concrete company. In the third part, models are presented which banks should use to protect against exposure to risks, i.e. their goal is to reduce losses on loan operations in our country, as well as to adjust to market conditions in an optimal way.

  13. Safeguarding the fuel cycle: Methodologies

    International Nuclear Information System (INIS)

    Gruemm, H.

    1984-01-01

    The effectiveness of IAEA safeguards is characterized by the extent to which they achieve their basic purpose - credible verification that no nuclear material is diverted from peaceful uses. This effectiveness depends inter alia but significantly on manpower in terms of the number and qualifications of inspectors. Staff increases will be required to improve effectiveness further, if this is requested by Member States, as well as to take into account new facilities expected to come under safeguards in the future. However, they are difficult to achieve due to financial constraints set by the IAEA budget. As a consequence, much has been done and is being undertaken to improve utilization of available manpower, including standardization of inspection procedures; improvement of management practices and training; rationalization of planning, reporting, and evaluation of inspection activities; and development of new equipment. This article focuses on certain aspects of the verification methodology presently used and asks: are any modifications of this methodology conceivable that would lead to economies of manpower, without loss of effectiveness. It has been stated in this context that present safeguards approaches are ''facility-oriented'' and that the adoption of a ''fuel cycle-oriented approach'' might bring about the desired savings. Many studies have been devoted to this very interesting suggestion. Up to this moment, no definite answer is available and further studies will be necessary to come to a conclusion. In what follows, the essentials of the problem are explained and some possible paths to a solution are discussed

  14. Methodology for combining dynamic responses

    International Nuclear Information System (INIS)

    Cudlin, R.; Hosford, S.; Mattu, R.; Wichman, K.

    1978-09-01

    The NRC has historically required that the structural/mechanical responses due to various accident loads and loads caused by natural phenomena, (such as earthquakes) be combined when analyzing structures, systems, and components important to safety. Several approaches to account for the potential interaction of loads resulting from accidents and natural phenomena have been used. One approach, the so-called absolute or linear summation (ABS) method, linearly adds the peak structural responses due to the individual dynamic loads. In general, the ABS method has also reflected the staff's conservative preference for the combination of dynamic load responses. A second approach, referred to as SRSS, yields a combined response equal to the square root of the sum of the squares of the peak responses due to the individual dynamic loads. The lack of a physical relationship between some of the loads has raised questions as to the proper methodology to be used in the design of nuclear power plants. An NRR Working Group was constituted to examine load combination methodologies and to develop a recommendation concerning criteria or conditions for their application. Evaluations of and recommendations on the use of the ABS and SRSS methods are provided in the report

  15. Capturing Individual Uptake: Toward a Disruptive Research Methodology

    Science.gov (United States)

    Bastian, Heather

    2015-01-01

    This article presents and illustrates a qualitative research methodology for studies of uptake. It does so by articulating a theoretical framework for qualitative investigations of uptake and detailing a research study designed to invoke and capture students' uptakes in a first-year writing classroom. The research design sought to make uptake…

  16. A multiple feedback methodology for the study of creativity evaluations

    DEFF Research Database (Denmark)

    Glaveanu, Vlad Petre

    2012-01-01

    The cultural psychology perspective emphasizes the role of communication and social interaction in the construction of representations and evaluations concerning creativity. In terms of creativity assessment, this approach leads to the use of a multiple feedback methodology selecting several groups...... useful for investigating the social and cultural dynamics of creativity....

  17. A methodology for controlling dispersion in food production and distribution

    DEFF Research Database (Denmark)

    Rong, Aiying; Grunow, Martin

    2010-01-01

    A number of food safety crises, the design and implementation of traceability systems became an important tool for managing safety risks in the food industry. In the literature, numerous studies deal with traceability from the viewpoint of the information system and technology development. Howeve...... the effectiveness of the developed methodology in a numerical investigation....

  18. Biomimetics as a design methodology – possibilities and challenges

    DEFF Research Database (Denmark)

    Lenau, Torben Anker

    2009-01-01

    Biomimetics – or bionik as it is called in parts of Europe – offer a number of promising opportunities and challenges for the designer. The paper investigates how biomimetics as a design methodology is used in engineering design by looking at examples of biological searches and highlight...

  19. Assessment of Wind Turbine Structural Integrity using Response Surface Methodology

    DEFF Research Database (Denmark)

    Toft, Henrik Stensgaard; Svenningsen, Lasse; Moser, Wolfgang

    2016-01-01

    Highlights •A new approach to assessment of site specific wind turbine loads is proposed. •The approach can be applied in both fatigue and ultimate limit state. •Two different response surface methodologies have been investigated. •The model uncertainty introduced by the response surfaces...

  20. Human Schedule Performance, Protocol Analysis, and the "Silent Dog" Methodology

    Science.gov (United States)

    Cabello, Francisco; Luciano, Carmen; Gomez, Inmaculada; Barnes-Holmes, Dermot

    2004-01-01

    The purpose of the current experiment was to investigate the role of private verbal behavior on the operant performances of human adults, using a protocol analysis procedure with additional methodological controls (the "silent dog" method). Twelve subjects were exposed to fixed ratio 8 and differential reinforcement of low rate 3-s schedules. For…

  1. Information technology security system engineering methodology

    Science.gov (United States)

    Childs, D.

    2003-01-01

    A methodology is described for system engineering security into large information technology systems under development. The methodology is an integration of a risk management process and a generic system development life cycle process. The methodology is to be used by Security System Engineers to effectively engineer and integrate information technology security into a target system as it progresses through the development life cycle. The methodology can also be used to re-engineer security into a legacy system.

  2. Epistemology and Empirical Investigation

    DEFF Research Database (Denmark)

    Ahlström, Kristoffer

    2008-01-01

    Recently, Hilary Kornblith has argued that epistemological investigation is substantially empirical. In the present paper, I will ¿rst show that his claim is not contingent upon the further and, admittedly, controversial assumption that all objects of epistemological investigation are natural kinds....... Then, I will argue that, contrary to what Kornblith seems to assume, this methodological contention does not imply that there is no need for attending to our epistemic concepts in epistemology. Understanding the make-up of our concepts and, in particular, the purposes they ¿ll, is necessary...

  3. Reconciling Anti-essentialism and Quantitative Methodology

    DEFF Research Database (Denmark)

    Jensen, Mathias Fjællegaard

    2017-01-01

    Quantitative methodology has a contested role in feminist scholarship which remains almost exclusively qualitative. Considering Irigaray’s notion of mimicry, Spivak’s strategic essentialism, and Butler’s contingent foundations, the essentialising implications of quantitative methodology may prove...... the potential to reconcile anti-essentialism and quantitative methodology, and thus, to make peace in the quantitative/qualitative Paradigm Wars....

  4. 42 CFR 441.472 - Budget methodology.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Budget methodology. 441.472 Section 441.472 Public... Self-Directed Personal Assistance Services Program § 441.472 Budget methodology. (a) The State shall set forth a budget methodology that ensures service authorization resides with the State and meets the...

  5. Application of agile methodologies in software development

    Directory of Open Access Journals (Sweden)

    Jovanović Aca D.

    2016-01-01

    Full Text Available The paper presents the potentials for the development of software using agile methodologies. Special consideration is devoted to the potentials and advantages of use of the Scrum methodology in the development of software and the relationship between the implementation of agile methodologies and the software development projects.

  6. Monitoring the International Standardization Process Theoretical Choices and Methodological Tools

    Directory of Open Access Journals (Sweden)

    Brigitte Juanals

    2012-08-01

    Full Text Available Many organizations are in charge of global security management. This paper outlines and argues for the construction of a theoretical and methodological framework in order to critically assess the new technopolitics currently being developed in the field of global security and which are materialized in standards. The main purpose is to design both a methodology and specific text mining tools to investigate these standards. These tools will be implemented in a platform designed to provide cartographic representations of standards and to assist the navigation of an end-user through a corpus of standards.

  7. Assessing potential health effects from municipal sludge incinerators: screening methodology

    Energy Technology Data Exchange (ETDEWEB)

    Fradkin, L.; Bruins, J.F.; Lutkenhoff, S.D.; Stara, J.F.; Lomnitz, E.; Rubin, A.

    1987-04-01

    This paper describes a risk assessment methodology for preliminary assessment of municipal sludge incineration. The methodology is a valuable tool in that it can be used for determining the hazard indices of chemical contaminants that might be present in sewage sludge used in incineration. The paper examines source characteristics (i.e., facility design), atmospheric dispersion of emission, and resulting human exposure and risk from sludge incinerators. Seven of the ten organics were screened for further investigation. An example of the calculations are presented for cadmium.

  8. Development of a novel methodology for indoor emission source identification

    DEFF Research Database (Denmark)

    Han, K.H.; Zhang, J.S.; Knudsen, H.N.

    2011-01-01

    The objective of this study was to develop and evaluate a methodology to identify individual sources of emissions based on the measurements of mixed air samples and the emission signatures of individual materials previously determined by Proton Transfer Reaction-Mass Spectrometry (PTR-MS), an on......-line analytical device. The methodology based on signal processing principles was developed by employing the method of multiple regression least squares (MRLS) and a normalization technique. Samples of nine typical building materials were tested individually and in combination, including carpet, ceiling material...... experiments and investigation are needed for cases where the relative emission rates among different compounds may change over a long-term period....

  9. Methodology for flammable gas evaluations

    Energy Technology Data Exchange (ETDEWEB)

    Hopkins, J.D., Westinghouse Hanford

    1996-06-12

    There are 177 radioactive waste storage tanks at the Hanford Site. The waste generates flammable gases. The waste releases gas continuously, but in some tanks the waste has shown a tendency to trap these flammable gases. When enough gas is trapped in a tank`s waste matrix, it may be released in a way that renders part or all of the tank atmosphere flammable for a period of time. Tanks must be evaluated against previously defined criteria to determine whether they can present a flammable gas hazard. This document presents the methodology for evaluating tanks in two areas of concern in the tank headspace:steady-state flammable-gas concentration resulting from continuous release, and concentration resulting from an episodic gas release.

  10. Methodological Reflections: Inter- ethnic Research

    DEFF Research Database (Denmark)

    Singla, Rashmi

    2010-01-01

    with both youth and the parental generation with ethnic minority background in Denmark. These reflections include implications and challenges related to researcher’s national, ethnic background and educational, professional position in encounter with   diverse ‘researched persons’ such as youth......This article reflects on the methodological and epistemological aspects of the ethical issues involved in encounters between researcher and research participants with ethnic minority background in contexts with diversity. Specific challenges involved in longitudinal research (10 - 15 years......) are also considered. The issues related to the social relevance of the research deriving from psycho political validity implying consideration of power dynamics in the personal, relational and collective domains are included. The primary basis for these reflections is a follow-up study concerning young...

  11. Simulation enabled safeguards assessment methodology

    International Nuclear Information System (INIS)

    Bean, Robert; Bjornard, Trond; Larson, Tom

    2007-01-01

    It is expected that nuclear energy will be a significant component of future supplies. New facilities, operating under a strengthened international nonproliferation regime will be needed. There is good reason to believe virtual engineering applied to the facility design, as well as to the safeguards system design will reduce total project cost and improve efficiency in the design cycle. Simulation Enabled Safeguards Assessment MEthodology has been developed as a software package to provide this capability for nuclear reprocessing facilities. The software architecture is specifically designed for distributed computing, collaborative design efforts, and modular construction to allow step improvements in functionality. Drag and drop wire-frame construction allows the user to select the desired components from a component warehouse, render the system for 3D visualization, and, linked to a set of physics libraries and/or computational codes, conduct process evaluations of the system they have designed. (authors)

  12. Simulation Enabled Safeguards Assessment Methodology

    International Nuclear Information System (INIS)

    Robert Bean; Trond Bjornard; Thomas Larson

    2007-01-01

    It is expected that nuclear energy will be a significant component of future supplies. New facilities, operating under a strengthened international nonproliferation regime will be needed. There is good reason to believe virtual engineering applied to the facility design, as well as to the safeguards system design will reduce total project cost and improve efficiency in the design cycle. Simulation Enabled Safeguards Assessment Methodology (SESAME) has been developed as a software package to provide this capability for nuclear reprocessing facilities. The software architecture is specifically designed for distributed computing, collaborative design efforts, and modular construction to allow step improvements in functionality. Drag and drop wireframe construction allows the user to select the desired components from a component warehouse, render the system for 3D visualization, and, linked to a set of physics libraries and/or computational codes, conduct process evaluations of the system they have designed

  13. Sustainable Innovation and Entrepreneurship Methodology

    DEFF Research Database (Denmark)

    Celik, Sine; Joore, Peter; Christodoulou, Panayiotis

    or regional “co-creation platform for sustainable solutions” to promote structural innovation. In this manual, the Sustainable Innovation and Entrepreneurship Methodology will be described. The organisational guidelines mainly take point of departure in how Aalborg University (AAU) in Denmark has organised......The objective of the InnoLabs project is to facilitate cross-sectoral, multidisciplinary solutions to complex social problems in various European settings. InnoLabs are university-driven physical and/or organizational spaces that function as student innovation laboratories and operate as a local...... this in daily practice. In line with the objectives of the Innolabs project (output 05), partners in the Innolabs project have reflected, evaluated and concluded the project experiences, which are described in this report. The InnoLabs project was developed for the 2014 call of Erasmus+ funds KA2- Cooperation...

  14. Methodologies for 2011 economic reports

    DEFF Research Database (Denmark)

    Nielsen, Rasmus

    STECF’s Expert Working Group 11-03 convened in Athens (28th March – 1st April, 2011) to discuss and seek agreement on the content, indicators, methodologies and format of the 2011 Annual Economic Reports (AER) on the EU fishing fleet, the fish processing and the aquaculture sectors. Proposals...... for improved contents and the overall structure were discussed. Templates for the national and EU overview chapters for the EU the fish processing and the aquaculture sectors were produced. Indicators for the EU fishing fleet and fish processing reports were reviewed; new indicators for the fish processing...... and the aquaculture sector reports were proposed. And topics of special interest were proposed for all three reports....

  15. Neural Networks Methodology and Applications

    CERN Document Server

    Dreyfus, Gérard

    2005-01-01

    Neural networks represent a powerful data processing technique that has reached maturity and broad application. When clearly understood and appropriately used, they are a mandatory component in the toolbox of any engineer who wants make the best use of the available data, in order to build models, make predictions, mine data, recognize shapes or signals, etc. Ranging from theoretical foundations to real-life applications, this book is intended to provide engineers and researchers with clear methodologies for taking advantage of neural networks in industrial, financial or banking applications, many instances of which are presented in the book. For the benefit of readers wishing to gain deeper knowledge of the topics, the book features appendices that provide theoretical details for greater insight, and algorithmic details for efficient programming and implementation. The chapters have been written by experts ands seemlessly edited to present a coherent and comprehensive, yet not redundant, practically-oriented...

  16. Stakeholder analysis methodologies resource book

    Energy Technology Data Exchange (ETDEWEB)

    Babiuch, W.M.; Farhar, B.C.

    1994-03-01

    Stakeholder analysis allows analysts to identify how parties might be affected by government projects. This process involves identifying the likely impacts of a proposed action and stakeholder groups affected by that action. Additionally, the process involves assessing how these groups might be affected and suggesting measures to mitigate any adverse effects. Evidence suggests that the efficiency and effectiveness of government actions can be increased and adverse social impacts mitigated when officials understand how a proposed action might affect stakeholders. This report discusses how to conduct useful stakeholder analyses for government officials making decisions on energy-efficiency and renewable-energy technologies and their commercialization. It discusses methodological issues that may affect the validity and reliability of findings, including sampling, generalizability, validity, ``uncooperative`` stakeholder groups, using social indicators, and the effect of government regulations. The Appendix contains resource directories and a list of specialists in stakeholder analysis and involvement.

  17. Inventory differences: An evaluation methodology

    International Nuclear Information System (INIS)

    Heinberg, C.L.; Roberts, N.J.

    1987-01-01

    This paper discusses an evaluation methodology which is used for inventory differences at the Los Alamos National Laboratory. It is recognized that there are various methods which can be, and are being, used to evaluate process inventory differences at DOE facilities. The purpose of this paper is to share our thoughts on the subject and our techniques with those who are responsible for the evaluation of inventory differences at their facility. One of the most dangerous aspects of any evaluation technique, especially one as complex as most inventory difference evaluations tend to be, is to fail to look at the tools being used as indicators. There is a tendency to look at the results of an evaluation by one technique as an absolute. At the Los Alamos National Laboratory, several tools are used and the final evaluation is based on a combination of the observed results of a many-faceted evaluation. The tools used and some examples are presented

  18. Methodology of formal software evaluation

    International Nuclear Information System (INIS)

    Tuszynski, J.

    1998-01-01

    Sydkraft AB, the major Swedish utility, owner of ca 6000 MW el installed in nuclear (NPP Barsebaeck and NPP Oskarshamn), fossil fuel and hydro Power Plants is facing modernization of the control systems of the plants. Standards applicable require structured, formal methods for implementation of the control functions in the modem, real time software systems. This presentation introduces implementation methodology as discussed presently at the Sydkraft organisation. The approach suggested is based upon the process of co-operation of three parties taking part in the implementation; owner of the plant, vendor and Quality Assurance (QA) organisation. QA will be based on tools for formal software validation and on systematic gathering by the owner of validated and proved-by-operation control modules for the concern-wide utilisation. (author)

  19. Butterfly valve torque prediction methodology

    International Nuclear Information System (INIS)

    Eldiwany, B.H.; Sharma, V.; Kalsi, M.S.; Wolfe, K.

    1994-01-01

    As part of the Motor-Operated Valve (MOV) Performance Prediction Program, the Electric Power Research Institute has sponsored the development of methodologies for predicting thrust and torque requirements of gate, globe, and butterfly MOVs. This paper presents the methodology that will be used by utilities to calculate the dynamic torque requirements for butterfly valves. The total dynamic torque at any disc position is the sum of the hydrodynamic torque, bearing torque (which is induced by the hydrodynamic force), as well as other small torque components (such as packing torque). The hydrodynamic torque on the valve disc, caused by the fluid flow through the valve, depends on the disc angle, flow velocity, upstream flow disturbances, disc shape, and the disc aspect ratio. The butterfly valve model provides sets of nondimensional flow and torque coefficients that can be used to predict flow rate and hydrodynamic torque throughout the disc stroke and to calculate the required actuation torque and the maximum transmitted torque throughout the opening and closing stroke. The scope of the model includes symmetric and nonsymmetric discs of different shapes and aspects ratios in compressible and incompressible fluid applications under both choked and nonchoked flow conditions. The model features were validated against test data from a comprehensive flowloop and in situ test program. These tests were designed to systematically address the effect of the following parameters on the required torque: valve size, disc shapes and disc aspect ratios, upstream elbow orientation and its proximity, and flow conditions. The applicability of the nondimensional coefficients to valves of different sizes was validated by performing tests on 42-in. valve and a precisely scaled 6-in. model. The butterfly valve model torque predictions were found to bound test data from the flow-loop and in situ testing, as shown in the examples provided in this paper

  20. System Anthropological Psychology: Methodological Foundations

    Directory of Open Access Journals (Sweden)

    Vitaliy Y. Klochko

    2012-01-01

    Full Text Available The article considers methodological foundations of the system anthropologicalpsychology (SAP as a scientific branch developed by a well-represented groupof Siberian scientists. SAP is a theory based on axiomatics of cultural-historicalpsychology of L.S. Vygotsky and transspective analysis as a specially developedmeans to define the tendencies of science developing as a self-organizing system.Transspective analysis has revealed regularities in a constantly growing complexityof professional-psychological thinking along the course of emergence ofscientific cognition. It has proved that the field of modern psychology is shapedby theories constructed with ideation of different grades of complexity. The concept“dynamics of the paradigm of science” is introduced; it allows transitions tobe acknowledged from ordinary-binary logic characteristics of the classical scienceto a binary-ternary logic, adequate to non-classical science and then to aternary-multidimensional logic, which is now at the stage of emergence. The latteris employed in SAP construction. It involves the following basic methodologicalprinciples: the principle of directed (selective interaction and the principle ofgenerative effect of selective interaction. The concept of “complimentary interaction”applied in natural as well as humanitarian sciences is reconsidered in thecontext of psychology. The conclusion is made that the principle of selectivity anddirectedness of interaction is relevant to the whole Universe embracing all kindsof systems including the living ones. Different levels of matter organization representingsemantic structures of various complexity use one and the same principleof meaning making through which the Universe ensures its sustainability asa self-developing phenomenon. This methodology provides an explanation fornature and stages of emergence of multidimensional life space of an individual,which comes as a foundation for generation of such features of

  1. CIAU methodology and BEPU applications

    International Nuclear Information System (INIS)

    Petruzzi, A.; D'Auria, F.

    2009-01-01

    Best-Estimate calculation results from complex thermal-hydraulic system codes (like Relap5, Cathare, Athlet, Trace, etc..) are affected by unavoidable approximations that are unpredictable without the use of computational tools that account for the various sources of uncertainty. Therefore the use of best-estimate codes within the reactor technology, either for design or safety purposes, implies understanding and accepting the limitations and the deficiencies of those codes. Uncertainties may have different origins ranging from the approximation of the models, to the approximation of the numerical solution, and to the lack of precision of the values adopted for boundary and initial conditions. The amount of uncertainty that affects a calculation may strongly depend upon the codes and the modeling techniques (i.e. the code's users). A consistent and robust uncertainty methodology must be developed taking into consideration all the above aspects. The CIAU (Code with the capability of Internal Assessment of Uncertainty) and the UMAE (Uncertainty Methodology based on Accuracy Evaluation) methods have been developed by University of Pisa (UNIPI) in the framework of a long lasting research activities started since 80's and involving several researchers. CIAU is extensively discussed in the available technical literature, Refs. [1, 2, 3, 4, 5, 6, 7], and tens of additional relevant papers, that provide comprehensive details about the method, can be found in the bibliography lists of the above references. Therefore, the present paper supplies only 'spot-information' about CIAU and focuses mostly on the applications to some cases of industrial interest. In particular the application of CIAU to the OECD BEMUSE (Best Estimate Methods Uncertainty and Sensitivity Evaluation, [8, 9]) project is discussed and a critical comparison respect with other uncertainty methods (in relation to items like: sources of uncertainties, selection of the input parameters and quantification of

  2. METHODOLOGY OF PROFESSIONAL PEDAGOGICAL EDUCATION: THEORY AND PRACTICE (THEORETICAL AND METHODOLOGICAL FOUNDATIONS OF VOCATIONAL TEACHER EDUCATION

    Directory of Open Access Journals (Sweden)

    E. M. Dorozhkin

    2014-01-01

    Full Text Available The study is aimed at investigating a justification of the new approach to the problem of vocational education development through the prism of interdependence research methodology and practice. This conceptual setup allows determining the main directions for teacher training modernization of vocational schools.The authors note that the current socio-economic situation in our country has actualized the problem of personnel training. Politicians, economists and scientists’ speeches are all about the shortage of skilled personnel. They see the main reason of this catastrophic situation in the present system of primary andsecondary vocational education. At least they concern over the current practice of pedagogical personnel training of vocational education who are to restore the system of vocational education. Our country, Russia has a great positive experience in solving this problem. Scientific-methodological centre for vocational teacher education is the Russian State Vocational Pedagogical University under the scientific direction of Academicianof the Russian Academy of Education, G. M. Romantsev. The reflection of scientific-theoretical bases of this education led the authors to the analysis and designing (formation of existent and new professional and pedagogical methodology. Methods. The fundamental position of A. M. Novikov on the generality of theresearch (scientific and practical activity methodology has become the theoretical platform of the present study. Conceptual field, conceptual statements and professional model are presented as the whole system (or integrating factor. The theoretical framework has determined the logic of the study and its results.Scientific and educational methodology differentiation in terms of the subject of cogni live activity has allowed identifying the main scientific and practical disciplines of vocational teacher education. The creative concept as the subject ground is instrumental

  3. The Methodological Dynamism of Grounded Theory

    Directory of Open Access Journals (Sweden)

    Nicholas Ralph

    2015-11-01

    Full Text Available Variations in grounded theory (GT interpretation are the subject of ongoing debate. Divergences of opinion, genres, approaches, methodologies, and methods exist, resulting in disagreement on what GT methodology is and how it comes to be. From the postpositivism of Glaser and Strauss, to the symbolic interactionist roots of Strauss and Corbin, through to the constructivism of Charmaz, the field of GT methodology is distinctive in the sense that those using it offer new ontological, epistemological, and methodological perspectives at specific moments in time. We explore the unusual dynamism attached to GT’s underpinnings. Our view is that through a process of symbolic interactionism, in which generations of researchers interact with their context, moments are formed and philosophical perspectives are interpreted in a manner congruent with GT’s essential methods. We call this methodological dynamism, a process characterized by contextual awareness and moment formation, contemporaneous translation, generational methodology, and methodological consumerism.

  4. The use of the problematization methodology for the investigation of learning assessment. What is specific in the case of higher education?O uso da metodologia da problematização para a investigação sobre avaliação da aprendizagem. O que há de específico para o ensino superior?

    Directory of Open Access Journals (Sweden)

    Neusi Aparecida Navas Berbel

    2006-11-01

    Full Text Available This study presents an investigation about the university teachers’ practices regarding the theme learning’s assessment. The Problematization Methodology was used, through the Arch of Maguerez, consisting on five stages: Observation of the Reality and the problem’s definition, Key-points to study, Theorization, Hypotheses of Solution and Application to the Reality. As observation of the reality, teachers of the fundamental and medium teaching were interviewed and took place a ransom of memory of the practical lived evaluation by the authors. The defined problem was “What is specific in the learning’s assessment in the case of Higher Education”? There was pointed four Key-points: The objectives intended in the Higher Education according to the literature; Assessment modalities existent in the literature; The exigency of the Higher Education as to assessment; The practiced assessment in the UEL. For the theorization, the literature revision was used, analysis of interviews with UEL educational and the analysis of the institution official documents. It was ended that the more specific practical evaluation exercised Higher Education are: publication of articles, participation in projects, seminars and field works. In the solution hypotheses, the publication and popularization of the research were consisted. As Application of the research, the author’s commitment is to diffuse and use the results in its own professional performance.Este estudo apresenta uma investigação das práticas adotadas por professores universitários na avaliação da aprendizagem. Utilizou-se a Metodologia da Problematização, por meio do Arco de Maguerez, constando de cinco etapas: Observação da Realidade e definição do problema, Pontos-chave a estudar, Teorização, Hipóteses de Solução e Aplicação à Realidade. Como observação da realidade, foram entrevistados professores do ensino fundamental e médio e realizou-se um resgate de memória das pr

  5. Customer satisfaction surveys: Methodological recommendations for financial service providers

    Directory of Open Access Journals (Sweden)

    Đorđić Marko

    2010-01-01

    Full Text Available This methodological article investigates practical challenges that emerge when conducting customer satisfaction surveys (CSS for financial service providers such as banks, insurance or leasing companies, and so forth. It displays methodological recommendations in reference with: (a survey design, (b sampling, (c survey method, (d questionnaire design, and (e data acquisition. Article provides appropriate explanations that usage of: two-stage survey design, SRS method, large samples, and rigorous fieldwork preparation can enhance the overall quality of CSS in financial services. Proposed methodological recommendations can primarily be applied to the primary quantitative marketing research in retail financial services. However, majority of them can be successfully applied when conducting primary quantitative marketing research in corporate financial services as well. .

  6. Methodology for characterisation of glass fibre composite architecture

    DEFF Research Database (Denmark)

    Hansen, Jens Zangenberg; Larsen, J.B.; Østergaard, R.C.

    2012-01-01

    of the fibres. The information is used for different analyses to investigate and characterise the fibre architecture. As an example, the methodology is applied to glass fibre reinforced composites with varying fibre contents. The different fibre volume fractions (FVFs) affect the number of contact points per......The present study outlines a methodology for microstructural characterisation of fibre reinforced composites containing circular fibres. Digital micrographs of polished cross-sections are used as input to a numerical image processing tool that determines spatial mapping and radii detection...... fibre, the communal fibre distance and the local FVF. The fibre diameter distribution and packing pattern remain somewhat similar for the considered materials. The methodology is a step towards a better understanding of the composite microstructure and can be used to evaluate the interconnection between...

  7. Methodological quality of systematic reviews on influenza vaccination.

    Science.gov (United States)

    Remschmidt, Cornelius; Wichmann, Ole; Harder, Thomas

    2014-03-26

    There is a growing body of evidence on the risks and benefits of influenza vaccination in various target groups. Systematic reviews are of particular importance for policy decisions. However, their methodological quality can vary considerably. To investigate the methodological quality of systematic reviews on influenza vaccination (efficacy, effectiveness, safety) and to identify influencing factors. A systematic literature search on systematic reviews on influenza vaccination was performed, using MEDLINE, EMBASE and three additional databases (1990-2013). Review characteristics were extracted and the methodological quality of the reviews was evaluated using the assessment of multiple systematic reviews (AMSTAR) tool. U-test, Kruskal-Wallis test, chi-square test, and multivariable linear regression analysis were used to assess the influence of review characteristics on AMSTAR-score. Fourty-six systematic reviews fulfilled the inclusion criteria. Average methodological quality was high (median AMSTAR-score: 8), but variability was large (AMSTAR range: 0-11). Quality did not differ significantly according to vaccination target group. Cochrane reviews had higher methodological quality than non-Cochrane reviews (p=0.001). Detailed analysis showed that this was due to better study selection and data extraction, inclusion of unpublished studies, and better reporting of study characteristics (all p<0.05). In the adjusted analysis, no other factor, including industry sponsorship or journal impact factor had an influence on AMSTAR score. Systematic reviews on influenza vaccination showed large differences regarding their methodological quality. Reviews conducted by the Cochrane collaboration were of higher quality than others. When using systematic reviews to guide the development of vaccination recommendations, the methodological quality of a review in addition to its content should be considered. Copyright © 2014 Elsevier Ltd. All rights reserved.

  8. Cost estimating for CERCLA remedial alternatives a unit cost methodology

    International Nuclear Information System (INIS)

    Brettin, R.W.; Carr, D.J.; Janke, R.J.

    1995-06-01

    The United States Environmental Protection Agency (EPA) Guidance for Conducting Remedial Investigations and Feasibility Studies Under CERCLA, Interim Final, dated October 1988 (EPA 1988) requires a detailed analysis be conducted of the most promising remedial alternatives against several evaluation criteria, including cost. To complete the detailed analysis, order-of-magnitude cost estimates (having an accuracy of +50 percent to -30 percent) must be developed for each remedial alternative. This paper presents a methodology for developing cost estimates of remedial alternatives comprised of various technology and process options with a wide range of estimated contaminated media quantities. In addition, the cost estimating methodology provides flexibility for incorporating revisions to remedial alternatives and achieves the desired range of accuracy. It is important to note that the cost estimating methodology presented here was developed as a concurrent path to the development of contaminated media quantity estimates. This methodology can be initiated before contaminated media quantities are estimated. As a result, this methodology is useful in developing cost estimates for use in screening and evaluating remedial technologies and process options. However, remedial alternative cost estimates cannot be prepared without the contaminated media quantity estimates. In the conduct of the feasibility study for Operable Unit 5 at the Fernald Environmental Management Project (FEMP), fourteen remedial alternatives were retained for detailed analysis. Each remedial alternative was composed of combinations of remedial technologies and processes which were earlier determined to be best suited for addressing the media-specific contaminants found at the FEMP site, and achieving desired remedial action objectives

  9. Climate index for Switzerland - Methodology

    International Nuclear Information System (INIS)

    2006-01-01

    According to the U.S. Department of Energy, an estimated 25% of the GNP is affected by weather-related events. The variations in temperature - even small ones - can also have long-lasting effects on the operational results of a company. Among other, the Energy supply sector is sensitive to weather risks: a milder or harsher than usual winter leads to a decrease or increase of energy consumption. The price of electricity on power trading facilities like Powernext is especially sensitive to odd changes in temperatures. Powernext and Meteo-France (the French meteorological agency) have joined expertise in order to promote the use of weather indices in term of decision making or underlying of hedging tools to energy actors, end users from any other sector of activity and specialists of the weather risk hedging. The Powernext Weather indices are made from information collected by Meteo-France's main observation network according to the norms of international meteorology, in areas carefully selected. The gross data are submitted to a thorough review allowing the correction of abnormalities and the reconstitution of missing data. Each index is fashioned to take into account the economic activity in the various regions of the country as represented by each region's population. This demographic information represents a fair approximation of the weight of the regional economic activity. This document presents the calculation methodology of average, minimum and maximum weather indexes with the winter and summer regression equations for the different economical regions of Switzerland. (J.S.)

  10. Methodology of site protection studies

    International Nuclear Information System (INIS)

    Farges, L.

    1980-01-01

    Preliminary studies preceding building of a nuclear facility aim at assessing the choice of a site and establishing operating and control procedures. These studies are of two types. Studies on the impact of environment on the nuclear facility to be constructed form one type and studies on the impact of nuclear facilities on the environment form the second type. A methodology giving a framework to studies of second type is presented. These studies are undertaken to choose suitable sites for nuclear facilities. After a preliminary selection of a site based on the first estimate, a detailed site study is undertaken. The procedure for this consists of five successive phases, namely, (1) an inquiry assessing the initial state of the site, (2) an initial synthesis of accumulated information for assessing the health and safety consequences of releases, (3) laboratory and field studies simulating the movement of waste products for a quantitative assessment of effects, (4) final synthesis for laying down the release limits and radiological control methods, and (5) conclusions based on comparing the data of final synthesis to the limits prescribed by regulations. These five phases are outlined. Role of periodic reassessments after the facility is in operation for same time is explained. (M.G.B.)

  11. Climate index for Belgium - Methodology

    International Nuclear Information System (INIS)

    2006-01-01

    According to the U.S. Department of Energy, an estimated 25% of the GNP is affected by weather-related events. The variations in temperature - even small ones - can also have long-lasting effects on the operational results of a company. Among other, the Energy supply sector is sensitive to weather risks: a milder or harsher than usual winter leads to a decrease or increase of energy consumption. The price of electricity on power trading facilities like Powernext is especially sensitive to odd changes in temperatures. Powernext and Meteo-France (the French meteorological agency) have joined expertise in order to promote the use of weather indices in term of decision making or underlying of hedging tools to energy actors, end users from any other sector of activity and specialists of the weather risk hedging. The Powernext Weather indices are made from information collected by Meteo-France's main observation network according to the norms of international meteorology, in areas carefully selected. The gross data are submitted to a thorough review allowing the correction of abnormalities and the reconstitution of missing data. Each index is fashioned to take into account the economic activity in the various regions of the country as represented by each region's population. This demographic information represents a fair approximation of the weight of the regional economic activity. This document presents the calculation methodology of average, minimum and maximum weather indexes with the winter and summer regression equations for the different economical regions of Belgium. (J.S.)

  12. Zika detection: comparison of methodologies

    Directory of Open Access Journals (Sweden)

    Tatiana Elias Colombo

    Full Text Available ABSTRACT Many countries in the Americas have detected local transmission of multiple arboviruses that cause febrile illnesses. Therefore, laboratory testing has become an important tool for confirming the etiology of these diseases. The present study aimed to compare the sensitivity and specificity of three different Zika virus detection assays. One hundred serum samples from patients presenting with acute febrile symptoms were tested using a previously reported TaqMan® RT-qPCR assay. We used a SYBR® Green RT-qPCR and a conventional PCR methodologies to compare the results. Of the samples that were determined to be negative by the TaqMan® RT-qPCR assay, 100% (Kappa = 0.670 were also found to be negative by SYBR® Green RT-qPCR based on Tm comparison; however, 14% (Kappa = 0.035 were found to be positive by conventional PCR followed by agarose gel electrophoresis. The differences between the ZIKV strains circulating worldwide and the low viremia period can compromise diagnostic accuracy and thereby the accuracy of outbreak data. Therefore, improved assays are required to improve the diagnosis and surveillance of arbovirus.

  13. Climate index for Portugal - Methodology

    International Nuclear Information System (INIS)

    2006-01-01

    According to the U.S. Department of Energy, an estimated 25% of the GNP is affected by weather-related events. The variations in temperature - even small ones - can also have long-lasting effects on the operational results of a company. Among other, the Energy supply sector is sensitive to weather risks: a milder or harsher than usual winter leads to a decrease or increase of energy consumption. The price of electricity on power trading facilities like Powernext is especially sensitive to odd changes in temperatures. Powernext and Meteo-France (the French meteorological agency) have joined expertise in order to promote the use of weather indices in term of decision making or underlying of hedging tools to energy actors, end users from any other sector of activity and specialists of the weather risk hedging. The Powernext Weather indices are made from information collected by Meteo-France's main observation network according to the norms of international meteorology, in areas carefully selected. The gross data are submitted to a thorough review allowing the correction of abnormalities and the reconstitution of missing data. Each index is fashioned to take into account the economic activity in the various regions of the country as represented by each region's population. This demographic information represents a fair approximation of the weight of the regional economic activity. This document presents the calculation methodology of average, minimum and maximum weather indexes with the winter and summer regression equations for the different economical regions of Portugal. (J.S.)

  14. Methodological Aspects of Architectural Documentation

    Directory of Open Access Journals (Sweden)

    Arivaldo Amorim

    2011-12-01

    Full Text Available This paper discusses the methodological approach that is being developed in the state of Bahia in Brazil since 2003, in architectural and urban sites documentation, using extensive digital technologies. Bahia has a vast territory with important architectural ensembles ranging from the sixteenth century to present day. As part of this heritage is constructed of raw earth and wood, it is very sensitive to various deleterious agents. It is therefore critical document this collection that is under threats. To conduct those activities diverse digital technologies that could be used in documentation process are being experimented. The task is being developed as an academic research, with few financial resources, by scholarship students and some volunteers. Several technologies are tested ranging from the simplest to the more sophisticated ones, used in the main stages of the documentation project, as follows: work overall planning, data acquisition, processing and management and ultimately, to control and evaluate the work. The activities that motivated this paper are being conducted in the cities of Rio de Contas and Lençóis in the Chapada Diamantina, located at 420 km and 750 km from Salvador respectively, in Cachoeira city at Recôncavo Baiano area, 120 km from Salvador, the capital of Bahia state, and at Pelourinho neighbourhood, located in the historic capital. Part of the material produced can be consulted in the website: < www.lcad.ufba.br>.

  15. Methodology of a systematic review.

    Science.gov (United States)

    Linares-Espinós, E; Hernández, V; Domínguez-Escrig, J L; Fernández-Pello, S; Hevia, V; Mayor, J; Padilla-Fernández, B; Ribal, M J

    2018-05-03

    The objective of evidence-based medicine is to employ the best scientific information available to apply to clinical practice. Understanding and interpreting the scientific evidence involves understanding the available levels of evidence, where systematic reviews and meta-analyses of clinical trials are at the top of the levels-of-evidence pyramid. The review process should be well developed and planned to reduce biases and eliminate irrelevant and low-quality studies. The steps for implementing a systematic review include (i) correctly formulating the clinical question to answer (PICO), (ii) developing a protocol (inclusion and exclusion criteria), (iii) performing a detailed and broad literature search and (iv) screening the abstracts of the studies identified in the search and subsequently of the selected complete texts (PRISMA). Once the studies have been selected, we need to (v) extract the necessary data into a form designed in the protocol to summarise the included studies, (vi) assess the biases of each study, identifying the quality of the available evidence, and (vii) develop tables and text that synthesise the evidence. A systematic review involves a critical and reproducible summary of the results of the available publications on a particular topic or clinical question. To improve scientific writing, the methodology is shown in a structured manner to implement a systematic review. Copyright © 2018 AEU. Publicado por Elsevier España, S.L.U. All rights reserved.

  16. Climate index for France - Methodology

    International Nuclear Information System (INIS)

    2006-01-01

    According to the U.S. Department of Energy, an estimated 25% of the GNP is affected by weather-related events. The variations in temperature - even small ones - can also have long-lasting effects on the operational results of a company. Among other, the Energy supply sector is sensitive to weather risks: a milder or harsher than usual winter leads to a decrease or increase of energy consumption. The price of electricity on power trading facilities like Powernext is especially sensitive to odd changes in temperatures. Powernext and Meteo-France (the French meteorological agency) have joined expertise in order to promote the use of weather indices in term of decision making or underlying of hedging tools to energy actors, end users from any other sector of activity and specialists of the weather risk hedging. The Powernext Weather indices are made from information collected by Meteo-France's main observation network according to the norms of international meteorology, in areas carefully selected. The gross data are submitted to a thorough review allowing the correction of abnormalities and the reconstitution of missing data. Each index is fashioned to take into account the economic activity in the various regions of the country as represented by each region's population. This demographic information represents a fair approximation of the weight of the regional economic activity. This document presents the calculation methodology of average, minimum and maximum weather indexes with the winter and summer regression equations for the different economical regions of France. (J.S.)

  17. Waste Package Design Methodology Report

    Energy Technology Data Exchange (ETDEWEB)

    D.A. Brownson

    2001-09-28

    The objective of this report is to describe the analytical methods and processes used by the Waste Package Design Section to establish the integrity of the various waste package designs, the emplacement pallet, and the drip shield. The scope of this report shall be the methodology used in criticality, risk-informed, shielding, source term, structural, and thermal analyses. The basic features and appropriateness of the methods are illustrated, and the processes are defined whereby input values and assumptions flow through the application of those methods to obtain designs that ensure defense-in-depth as well as satisfy requirements on system performance. Such requirements include those imposed by federal regulation, from both the U.S. Department of Energy (DOE) and U.S. Nuclear Regulatory Commission (NRC), and those imposed by the Yucca Mountain Project to meet repository performance goals. The report is to be used, in part, to describe the waste package design methods and techniques to be used for producing input to the License Application Report.

  18. Methodological Issues in Questionnaire Design.

    Science.gov (United States)

    Song, Youngshin; Son, Youn Jung; Oh, Doonam

    2015-06-01

    The process of designing a questionnaire is complicated. Many questionnaires on nursing phenomena have been developed and used by nursing researchers. The purpose of this paper was to discuss questionnaire design and factors that should be considered when using existing scales. Methodological issues were discussed, such as factors in the design of questions, steps in developing questionnaires, wording and formatting methods for items, and administrations methods. How to use existing scales, how to facilitate cultural adaptation, and how to prevent socially desirable responding were discussed. Moreover, the triangulation method in questionnaire development was introduced. Steps were recommended for designing questions such as appropriately operationalizing key concepts for the target population, clearly formatting response options, generating items and confirming final items through face or content validity, sufficiently piloting the questionnaire using item analysis, demonstrating reliability and validity, finalizing the scale, and training the administrator. Psychometric properties and cultural equivalence should be evaluated prior to administration when using an existing questionnaire and performing cultural adaptation. In the context of well-defined nursing phenomena, logical and systematic methods will contribute to the development of simple and precise questionnaires.

  19. Waste Package Design Methodology Report

    International Nuclear Information System (INIS)

    D.A. Brownson

    2001-01-01

    The objective of this report is to describe the analytical methods and processes used by the Waste Package Design Section to establish the integrity of the various waste package designs, the emplacement pallet, and the drip shield. The scope of this report shall be the methodology used in criticality, risk-informed, shielding, source term, structural, and thermal analyses. The basic features and appropriateness of the methods are illustrated, and the processes are defined whereby input values and assumptions flow through the application of those methods to obtain designs that ensure defense-in-depth as well as satisfy requirements on system performance. Such requirements include those imposed by federal regulation, from both the U.S. Department of Energy (DOE) and U.S. Nuclear Regulatory Commission (NRC), and those imposed by the Yucca Mountain Project to meet repository performance goals. The report is to be used, in part, to describe the waste package design methods and techniques to be used for producing input to the License Application Report

  20. Climate index for Spain - Methodology

    International Nuclear Information System (INIS)

    2006-01-01

    According to the U.S. Department of Energy, an estimated 25% of the GNP is affected by weather-related events. The variations in temperature - even small ones - can also have long-lasting effects on the operational results of a company. Among other, the Energy supply sector is sensitive to weather risks: a milder or harsher than usual winter leads to a decrease or increase of energy consumption. The price of electricity on power trading facilities like Powernext is especially sensitive to odd changes in temperatures. Powernext and Meteo-France (the French meteorological agency) have joined expertise in order to promote the use of weather indices in term of decision making or underlying of hedging tools to energy actors, end users from any other sector of activity and specialists of the weather risk hedging. The Powernext Weather indices are made from information collected by Meteo-France's main observation network according to the norms of international meteorology, in areas carefully selected. The gross data are submitted to a thorough review allowing the correction of abnormalities and the reconstitution of missing data. Each index is fashioned to take into account the economic activity in the various regions of the country as represented by each region's population. This demographic information represents a fair approximation of the weight of the regional economic activity. This document presents the calculation methodology of average, minimum and maximum weather indexes with the winter and summer regression equations for the different economical regions of Spain. (J.S.)