WorldWideScience

Sample records for international optical computing

  1. Optical computer motherboards

    Science.gov (United States)

    Jannson, Tomasz P.; Xu, Guoda; Bartha, John M.; Gruntman, Michael A.

    1997-09-01

    In this paper, we investigate the application of precision plastic optics into a communication/computer sub-system, such as a hybrid computer motherboard. We believe that using optical waveguides for next-generation computer motherboards can provide a high performance alternative for present multi-layer printed circuit motherboards. In response to this demand, we suggest our novel concept of a hybrid motherboard based on an internal-fiber-coupling (IFC) wavelength-division-multiplexing (WDM) optical backplane. The IFC/WDM backplane provides dedicated Tx/Rx connections, and applies low-cost, high-performance components, including CD LDs, GRIN plastic fibers, molding housing, and nonimaging optics connectors. Preliminary motherboard parameters are: speed 100 MHz/100 m, or 1 GHz/10 m; fiber loss approximately 0.01 dB/m; almost zero fan-out/fan-in optical power loss, and eight standard wavelength channels. The proposed hybrid computer motherboard, based on innovative optical backplane technology, should solve low-speed, low-parallelism bottlenecks in present electric computer motherboards.

  2. Optical Quantum Computing

    National Research Council Canada - National Science Library

    Jeremy L. O'Brien

    2007-01-01

    In 2001, all-optical quantum computing became feasible with the discovery that scalable quantum computing is possible using only single-photon sources, linear optical elements, and single-photon detectors...

  3. An Optical and Computational Investigation on the Effects of Transient Fuel Injections in Internal Combustion Engines

    Science.gov (United States)

    Neal, Nicholas

    The effects of transient rate-of-injection profiles on high-pressure fuel jets have been studied in an optically accessible internal combustion engine. High-speed optical imaging measurements were applied over a range of ambient conditions, fuel types, and injection parameters. The optical data demonstrate that during the early part of the injection, while the liquid core of the jet is disintegrating, penetration is functionally linked to the orifice exit velocity up until a downstream distance hypothesized to be the jet breakup length. The jets then transition to a mixing dominated penetration behavior further downstream. Therefore, for cases that exhibit transient rate-of-injection (ROI) profiles, quasi-steady correlations for penetration have poor agreement with the empirical data. The lack of agreement between models using quasi-steady approximations and the high-speed experimental data, and the experimental evidence of liquid core physics impacting the transient jet penetration, motivated the development of a new 1-D model that integrates liquid core penetration physics and eliminates quasi-steady approximations. The new 1-D modeling methodology couples the transport equations for the evolution of the liquid core of the jet and the surrounding sheath of droplets resulting from breakup. The results of the model are validated against the aforementioned optical transient jet measurements. Finally, experimental results for two jet fuels and a diesel fuel are studied with the aid of the model. Differences in fuel properties cause the diesel fuel jet to transition from an incomplete spray to a complete spray later than the jet fuels during the transient injection process. Increasing ambient density causes the transition to happen earlier during the injection transient for all three fuels. The ignition delay and liftoff length appeared to be relatively unaffected by the late transition from incomplete to complete spray at low ambient density and low injection

  4. Ternary optical computer principle

    Institute of Scientific and Technical Information of China (English)

    金翊; 何华灿; 吕养天

    2003-01-01

    The fundamental principle and the characteristics of ternary optical computer, using horizontal polarized light, vertical polarized light and no-intensity to express information, are propounded in thispaper. The practicability to make key parts of the ternary optical computer from modern micro or integrated optical devices, opto-electronic and electro-photonic elements is discussed. The principle can be applied in three-state optical fiber communication via horizontal and vertical polarized light.

  5. Optics and Symbolic Computing

    Science.gov (United States)

    1988-03-31

    28, No. 10, 795 "- 979v 5. 6. A. Huang and S. Knauer, Starlite : A Wideband Digital Switch, Proc. IEEE Global Telecommunications Conference, Atlanta...4 31 : .-. I ?4 2A 8. A. Huang, The Relationship Between STARLITE , a Wideband Digital Switch and Optics, Proc. International Conference on...34 Applied Optics, voL 27, No. 2, pp. 202-203 (1988). [10] A. Huang. "The relationship between STARLITE . a wideband digital switch and optics". Proceedings of

  6. Optical quantum computing.

    Science.gov (United States)

    O'Brien, Jeremy L

    2007-12-07

    In 2001, all-optical quantum computing became feasible with the discovery that scalable quantum computing is possible using only single-photon sources, linear optical elements, and single-photon detectors. Although it was in principle scalable, the massive resource overhead made the scheme practically daunting. However, several simplifications were followed by proof-of-principle demonstrations, and recent approaches based on cluster states or error encoding have dramatically reduced this worrying resource overhead, making an all-optical architecture a serious contender for the ultimate goal of a large-scale quantum computer. Key challenges will be the realization of high-efficiency sources of indistinguishable single photons, low-loss, scalable optical circuits, high-efficiency single-photon detectors, and low-loss interfacing of these components.

  7. Computational optical biopsy

    Directory of Open Access Journals (Sweden)

    Jiang Ming

    2005-06-01

    Full Text Available Abstract Optical molecular imaging is based on fluorescence or bioluminescence, and hindered by photon scattering in the tissue, especially in patient studies. Here we propose a computational optical biopsy (COB approach to localize and quantify a light source deep inside a subject. In contrast to existing optical biopsy techniques, our scheme is to collect optical signals directly from a region of interest along one or multiple biopsy paths in a subject, and then compute features of an underlying light source distribution. In this paper, we formulate this inverse problem in the framework of diffusion approximation, demonstrate the solution uniqueness properties in two representative configurations, and obtain analytic solutions for reconstruction of both optical properties and source parameters.

  8. Models of optical quantum computing

    Directory of Open Access Journals (Sweden)

    Krovi Hari

    2017-03-01

    Full Text Available I review some work on models of quantum computing, optical implementations of these models, as well as the associated computational power. In particular, we discuss the circuit model and cluster state implementations using quantum optics with various encodings such as dual rail encoding, Gottesman-Kitaev-Preskill encoding, and coherent state encoding. Then we discuss intermediate models of optical computing such as boson sampling and its variants. Finally, we review some recent work in optical implementations of adiabatic quantum computing and analog optical computing. We also provide a brief description of the relevant aspects from complexity theory needed to understand the results surveyed.

  9. All-optical reservoir computing.

    Science.gov (United States)

    Duport, François; Schneider, Bendix; Smerieri, Anteo; Haelterman, Marc; Massar, Serge

    2012-09-24

    Reservoir Computing is a novel computing paradigm that uses a nonlinear recurrent dynamical system to carry out information processing. Recent electronic and optoelectronic Reservoir Computers based on an architecture with a single nonlinear node and a delay loop have shown performance on standardized tasks comparable to state-of-the-art digital implementations. Here we report an all-optical implementation of a Reservoir Computer, made of off-the-shelf components for optical telecommunications. It uses the saturation of a semiconductor optical amplifier as nonlinearity. The present work shows that, within the Reservoir Computing paradigm, all-optical computing with state-of-the-art performance is possible.

  10. Computational Intelligence : International Joint Conference

    CERN Document Server

    Rosa, Agostinho; Cadenas, José; Dourado, António; Madani, Kurosh; Filipe, Joaquim

    2016-01-01

    The present book includes a set of selected extended papers from the sixth International Joint Conference on Computational Intelligence (IJCCI 2014), held in Rome, Italy, from 22 to 24 October 2014. The conference was composed by three co-located conferences:  The International Conference on Evolutionary Computation Theory and Applications (ECTA), the International Conference on Fuzzy Computation Theory and Applications (FCTA), and the International Conference on Neural Computation Theory and Applications (NCTA). Recent progresses in scientific developments and applications in these three areas are reported in this book. IJCCI received 210 submissions, from 51 countries, in all continents. After a double blind paper review performed by the Program Committee, 15% were accepted as full papers and thus selected for oral presentation. Additional papers were accepted as short papers and posters. A further selection was made after the Conference, based also on the assessment of presentation quality and audience in...

  11. Computational Intelligence : International Joint Conference

    CERN Document Server

    Dourado, António; Rosa, Agostinho; Filipe, Joaquim; Kacprzyk, Janusz

    2016-01-01

    The present book includes a set of selected extended papers from the fifth International Joint Conference on Computational Intelligence (IJCCI 2013), held in Vilamoura, Algarve, Portugal, from 20 to 22 September 2013. The conference was composed by three co-located conferences:  The International Conference on Evolutionary Computation Theory and Applications (ECTA), the International Conference on Fuzzy Computation Theory and Applications (FCTA), and the International Conference on Neural Computation Theory and Applications (NCTA). Recent progresses in scientific developments and applications in these three areas are reported in this book. IJCCI received 111 submissions, from 30 countries, in all continents. After a double blind paper review performed by the Program Committee, only 24 submissions were accepted as full papers and thus selected for oral presentation, leading to a full paper acceptance ratio of 22%. Additional papers were accepted as short papers and posters. A further selection was made after ...

  12. International Computer Symposium

    CERN Document Server

    Jain, Lakhmi; Peng, Sheng-Lung; Pan, Jeng-Shyang; Yang, Ching-Nung; Lin, Chia-Chen

    2013-01-01

    The field of Intelligent Systems and Applications has expanded enormously during the last two decades. Theoretical and practical results in this area are growing rapidly due to many successful applications and new theories derived from many diverse problems. This book is dedicated to the Intelligent Systems and Applications in many different aspects. In particular, this book is to provide highlights of the current research in Intelligent Systems and Applications. It consists of research papers in the following specific topics:   l   Graph Theory and Algorithms l   Interconnection Networks and Combinatorial Algorithms l   Artificial Intelligence and Fuzzy Systems l   Database, Data Mining, and Information Retrieval l   Information Literacy, e-Learning, and Social Media l   Computer Networks and Web Service/Technologies l   Wireless Sensor Networks l   Wireless Network Protocols l   Wireless Data Processing   This book provides a reference to theoretical problems as well as practical solutio...

  13. International Conference on Optical Computing Held in Edinburgh, Scotland on August 22-25, 1994. Technical Digest

    Science.gov (United States)

    1994-08-24

    Barcelona, Departament do Fisica , Laboraton d’Optice. 08193 Bollaterra, Barcelona, Spain. Abstdrct. The uso of Minimum Average Correlation Energy...comunicaci6a Cludad Universitaria 28040 - Madrid Spain Telephone: +34-1-336 73 04 Fax: +34-1-336 73 19 AB•-AT A new method able to evaluate the behaviour of an

  14. Accuracy Enhancement in Optical Computing

    Science.gov (United States)

    1993-03-25

    optical matrix-vector multiplier (OMVM). Redundant information can be introduced into the matriz : by increasinq the row dimcnsion of tlie matrix. The...Analog Devices for Optical Computing", LEOS, Boston , MA., November 1992. Papers Submitted to Major Professional Meetings 1. S. A. Ellett, J. F. Walkup

  15. Optical technologies for computational intelligence

    Science.gov (United States)

    Pavlov, Alexander V.

    2001-11-01

    Optics has a number of deep analogies with main principles of Computational Intelligence. We can see strong analogies between basic optical phenomena, used in Fourier-holography, and mathematical foundations of Fuzzy Set Theory. Also, analogies between optical holography technique and principles of Neural Networks Paradigm can be seen. Progress in new holographic recording media with self-developing property leads to Evolutionary Computations holographic realization. Based on these analogies we review holographic techniques from two points of view: Fuzzy Logic and Fuzzy relations.

  16. Pacifist's guide to optical computers

    Science.gov (United States)

    Caulfield, H. John

    1991-11-01

    Optical algebraic processors can perform complex calculations in parallel and at high speeds. However, they commonly suffer from a low analog accuracy which hinders their widespread application. Error detection and correction codes provide one technique for improving the accuracy of optical algebraic processors. The use of these codes would allow some of the errors that may occur during a computation to be detected and possibly corrected. This paper describes the results of various computer simulations of optical matrix-vector multipliers employing error-correction codes. It discusses the application of convolutional codes to optical matrix-vector multipliers along with several block codes. Both binary and nonbinary codes are not employing error-correction codes. Also, the type of noise, whether signal-independent or signal-dependent, has a significant effect on the performance of a matrix-vector multiplier employing an error code. The encoding and decoding operations required for the error codes can be performed optically.

  17. Optics and Symbolic Computing

    Science.gov (United States)

    1987-03-01

    computation. The well-structured data formats of vectors, matrices , etc. used in numeric computing give way to data structures that can change their shapes...complex circuitry, especially to emiIate and achieve capabilities typically if operacion requires uniformity over the complete associated with...function (PSF) P as a MxN matrix of rank R, then it is possible to decompose matrix P into a product of two unitary matrices and a diagonal matrix, ’ A

  18. Quantum Computation with Nonlinear Optics

    Science.gov (United States)

    Liu, Yang; Zhang, Wen-Hong; Zhang, Cun-Lin; Long, Gui-Lu

    2008-01-01

    We propose a scheme of quantum computation with nonlinear quantum optics. Polarization states of photons are used for qubits. Photons with different frequencies represent different qubits. Single qubit rotation operation is implemented through optical elements like the Faraday polarization rotator. Photons are separated into different optical paths, or merged into a single optical path using dichromatic mirrors. The controlled-NOT gate between two qubits is implemented by the proper combination of parametric up and down conversions. This scheme has the following features: (1) No auxiliary qubits are required in the controlled-NOT gate operation; (2) No measurement is required in the course of the computation; (3) It is resource efficient and conceptually simple.

  19. Quantum Computation with Nonlinear Optics

    Institute of Scientific and Technical Information of China (English)

    LU Ke; LIU Yang; LIN Zhen-Quan; ZHANG Wen-Hong; SUN Yun-Fei; ZHANG Cun-Lin; LONG Gui-Lu

    2008-01-01

    We propose a scheme of quantum computation with nonlinear quantum optics. Polarization states of photons are used for qubits. Photons with different frequencies represent different qubits. Single qubit rotation operation is implemented through optical elements like the Faraday polarization rotator. Photons are separated into different optical paths, or merged into a single optical path using dichromatic mirrors. The controlled-NOT gate between two qubits is implemented by the proper combination of parametric up and down conversions. This scheme has the following features: (1) No auxiliary qubits are required in the controlled-NOT gate operation; (2) No measurement is required in the courseof the computation; (3) It is resource efficient and conceptually simple.

  20. Optical printing in computer animation

    Energy Technology Data Exchange (ETDEWEB)

    Max, N.L.; Blunden, J.A.

    1980-05-01

    The optical printer can be considered as an optical analog computer, which can perform geometric transformations and simple arithmetic operations on pictures very efficiently. The principles of operation of the printer are explained, and many of its applications to computer animation are listed and discussed briefly. Two techniques are discussed in detail: the use of high contrast masks to suppress the bright spots where two lines of different colors cross, and the use of continuous tone masks and multiple exposures to create realistic transparency at low cost.

  1. JPRS Report, Science & Technology, Europe, First International Computers Communications Conference

    Science.gov (United States)

    2007-11-02

    Hong Kong Telephone has employed fibre optic technology in its transmission network since 1981. Fibre optic transmission systems are used to...leased datalines. The potentials of fibre optic systems are large, and in this paper, some examples will be given to illustrate how the attributes of... fibre optic systems are exploited in Hong Kong Telephone. This report of Science & Technology Europe, First International Computers Communications Conference.

  2. International Conference on Advanced Computing

    CERN Document Server

    Patnaik, Srikanta

    2014-01-01

    This book is composed of the Proceedings of the International Conference on Advanced Computing, Networking, and Informatics (ICACNI 2013), held at Central Institute of Technology, Raipur, Chhattisgarh, India during June 14–16, 2013. The book records current research articles in the domain of computing, networking, and informatics. The book presents original research articles, case-studies, as well as review articles in the said field of study with emphasis on their implementation and practical application. Researchers, academicians, practitioners, and industry policy makers around the globe have contributed towards formation of this book with their valuable research submissions.

  3. A ROBUST OPTICAL FLOW COMPUTATION

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    This paper presents a new method for robust and accurate optical flow estimation. The significance of this work is twofold. Firstly, the idea of bi-directional scheme is adopted to reduce the model error of optical flow equation, which allows the second order Taylor's expansion of optical flow equation for accurate solution without much extra computational burden; Secondly, this paper establishs a new optical flow equation based on LSCM (Local Structure Constancy Model) instead of BCM (Brightness Constancy Model), namely the optical flow equation does not act on scalar but on tensor-valued (matrix-valued) field, due to the two reason: (1) structure tensor-value contains local spatial structure information, which provides us more useable cues for computation than scalar; (2) local image structure is less sensitive to illumination variation than intensity, which weakens the disturbance of non-uniform illumination in real sequences. Qualitative and quantitative results for synthetic and real-world scenes show that the new method can produce an accurate and robust results.

  4. International Standardization Activities for Optical Amplifiers

    Institute of Scientific and Technical Information of China (English)

    Haruo Okamura

    2003-01-01

    International standardization activities for Optical Amplifiers at IECTC86 and ITU-T SG15 are reviewed. Current discussions include Optical Amplifier safety guideline, Reliability standard, Rest methods of Noise and PMD, Definitions of Raman amplifier parameters and OA classification.

  5. Quantum Computing: Linear Optics Implementations

    CERN Document Server

    Sundsøy, Pål

    2016-01-01

    One of the main problems that optical quantum computing has to overcome is the efficient construction of two-photon gates. Theoretically these gates can be realized using Kerr-nonlinearities, but the techniques involved are experimentally very difficult. We therefore employ linear optics with projective measurements to generate these non-linearities. The downside is that the measurement-induced nonlinearities achieved with linear optics are less versatile and the success rate can be quite low. This project is mainly the result of a literature study but also a theoretical work on the physics behind quantum optical multiports which is essential for realizing two-photon gates. By applying different postcorrection techniques we increase the probability of success in a modifed non-linear sign shift gate which is foundational for the two photon controlled-NOT gate. We prove that it's not possible to correct the states by only using a single beam splitter. We show that it might be possible to increase the probabilit...

  6. 7th International Workshop on Advanced Optical Imaging and Metrology

    CERN Document Server

    2014-01-01

    In continuation of the FRINGE Workshop Series this Proceeding contains all contributions presented at the 7. International Workshop on Advanced Optical Imaging and Metrology. The FRINGE Workshop Series is dedicated to the presentation, discussion and dissemination of recent results in Optical Imaging and Metrology. Topics of particular interest for the 7. Workshop are: - New methods and tools for the generation, acquisition, processing, and evaluation of data in Optical Imaging and Metrology (digital wavefront engineering, computational imaging, model-based reconstruction, compressed sensing, inverse problems solution) - Application-driven technologies in Optical Imaging and Metrology (high-resolution, adaptive, active, robust, reliable, flexible, in-line, real-time) - High-dynamic range solutions in Optical Imaging and Metrology (from macro to nano) - Hybrid technologies in Optical Imaging and Metrology (hybrid optics, sensor and data fusion, model-based solutions, multimodality) - New optical sensors, imagi...

  7. International Conference on Computational Mechanics

    CERN Document Server

    Atluri, Satya

    1986-01-01

    It is often said that these days there are too many conferences on general areas of computational mechanics. mechanics. and numer ical methods. vJhile this may be true. the his tory of scientific conferences is itself quite short. According to Abraham Pais (in "Subtle is the Lord ...• " Oxford University Press. 1982. p.80). the first international scientific conference ever held was the Karlsruhe Congress of Chemists. 3-5 September 1860 in Karlsruhe. Germany. There were 127 chemists in attendance. and the participants came from Austria. Belgium. France. Germany. Great Britain. Italy. Mexico. Poland. Russia. Spain. Sweden. and Switzerland. At the top of the agenda of the points to be discussed at this conference was the question: "Shall a difference be made between the expressions molecule and atom?" Pais goes on to note: "The conference did not at once succeed in bringing chemists closer together ... It is possible that the older men were offended by the impetuous behavior and imposing manner of the younger...

  8. Optically simulated universal quantum computation

    Science.gov (United States)

    Francisco, D.; Ledesma, S.

    2008-04-01

    Recently, classical optics based systems to emulate quantum information processing have been proposed. The analogy is based on the possibility of encoding a quantum state of a system with a 2N-dimensional Hilbert space as an image in the input of an optical system. The probability amplitude of each state of a certain basis is associated with the complex amplitude of the electromagnetic field in a given slice of the laser wavefront. Temporal evolution is represented as the change of the complex amplitude of the field when the wavefront pass through a certain optical arrangement. Different modules that represent universal gates for quantum computation have been implemented. For instance, unitary operations acting on the qbits space (or U(2) gates) are represented by means of two phase plates, two spherical lenses and a phase grating in a typical image processing set up. In this work, we present CNOT gates which are emulated by means of a cube prism that splits a pair of adjacent rays incoming from the input image. As an example of application, we present an optical module that can be used to simulate the quantum teleportation process. We also show experimental results that illustrate the validity of the analogy. Although the experimental results obtained are promising and show the capability of the system for simulate the real quantum process, we must take into account that any classical simulation of quantum phenomena, has as fundamental limitation the impossibility of representing non local entanglement. In this classical context, quantum teleportation has only an illustrative interpretation.

  9. Teachers' Computer Anxiety: An International Perspective.

    Science.gov (United States)

    Yaghi, Hussein M.; Abu-Saba, Mary Bentley

    1998-01-01

    Describes a study that investigated computer anxiety among Lebanese teachers known to use computers in their regular educational programs. Highlights include use of the Computer Anxiety Rating Scale (CARS), international experiences, educational attributes including language of instruction, and computer experience. (Author/LRW)

  10. Digital optical computers at the optoelectronic computing systems center

    Science.gov (United States)

    Jordan, Harry F.

    1991-01-01

    The Digital Optical Computing Program within the National Science Foundation Engineering Research Center for Opto-electronic Computing Systems has as its specific goal research on optical computing architectures suitable for use at the highest possible speeds. The program can be targeted toward exploiting the time domain because other programs in the Center are pursuing research on parallel optical systems, exploiting optical interconnection and optical devices and materials. Using a general purpose computing architecture as the focus, we are developing design techniques, tools and architecture for operation at the speed of light limit. Experimental work is being done with the somewhat low speed components currently available but with architectures which will scale up in speed as faster devices are developed. The design algorithms and tools developed for a general purpose, stored program computer are being applied to other systems such as optimally controlled optical communication networks.

  11. International assessment of functional computer abilities

    NARCIS (Netherlands)

    Anderson, Ronald E.; Collis, Betty

    1993-01-01

    After delineating the major rationale for computer education, data are presented from Stage 1 of the IEA Computers in Education Study showing international comparisons that may reflect differential priorities. Rapid technological change and the lack of consensus on goals of computer education impede

  12. An Optical Tri-valued Computing System

    Directory of Open Access Journals (Sweden)

    Junjie Peng

    2014-03-01

    Full Text Available A new optical computing experimental system is presented. Designed based on tri-valued logic, the system is built as a photoelectric hybrid computer system which is much advantageous over its electronic counterparts. Say, the tri-valued logic of the system guarantees that it is more powerful in information processing than that of systems with binary logic. And the optical characteristic of the system makes it be much capable in huge data processing than that of the electronic computers. The optical computing system includes two parts, electronic part and optical part. The electronic part consists of a PC and two embedded systems which are used for data input/output, monitor, synchronous control, user data combination and separation and so on. The optical part includes three components. They are optical encoder, logic calculator and decoder. It mainly answers for encoding the users' requests into tri-valued optical information, computing and processing the requests, decoding the tri-valued optical information to binary electronic information and so forth. Experiment results show that the system is quite right in optical information processing which demonstrates the feasibility and correctness of the optical computing system.

  13. 8th International Workshop on Natural Computing

    CERN Document Server

    Hagiya, Masami

    2016-01-01

    This book highlights recent advances in natural computing, including biology and its theory, bio-inspired computing, computational aesthetics, computational models and theories, computing with natural media, philosophy of natural computing, and educational technology. It presents extended versions of the best papers selected from the “8th International Workshop on Natural Computing” (IWNC8), a symposium held in Hiroshima, Japan, in 2014. The target audience is not limited to researchers working in natural computing but also includes those active in biological engineering, fine/media art design, aesthetics, and philosophy.

  14. 7th International Workshop on Natural Computing

    CERN Document Server

    Hagiya, Masami

    2015-01-01

    This book highlights recent advances in natural computing, including biology and its theory, bio-inspired computing, computational aesthetics, computational models and theories, computing with natural media, philosophy of natural computing and educational technology. It presents extended versions of the best papers selected from the symposium “7th International Workshop on Natural Computing” (IWNC7), held in Tokyo, Japan, in 2013. The target audience is not limited to researchers working in natural computing but also those active in biological engineering, fine/media art design, aesthetics and philosophy.

  15. Quantum computation architecture using optical tweezers

    DEFF Research Database (Denmark)

    Weitenberg, Christof; Kuhr, Stefan; Mølmer, Klaus;

    2011-01-01

    We present a complete architecture for scalable quantum computation with ultracold atoms in optical lattices using optical tweezers focused to the size of a lattice spacing. We discuss three different two-qubit gates based on local collisional interactions. The gates between arbitrary qubits...... quantum computing....

  16. Model of computation for Fourier optical processors

    Science.gov (United States)

    Naughton, Thomas J.

    2000-05-01

    We present a novel and simple theoretical model of computation that captures what we believe are the most important characteristics of an optical Fourier transform processor. We use this abstract model to reason about the computational properties of the physical systems it describes. We define a grammar for our model's instruction language, and use it to write algorithms for well-known filtering and correlation techniques. We also suggest suitable computational complexity measures that could be used to analyze any coherent optical information processing technique, described with the language, for efficiency. Our choice of instruction language allows us to argue that algorithms describable with this model should have optical implementations that do not require a digital electronic computer to act as a master unit. Through simulation of a well known model of computation from computer theory we investigate the general-purpose capabilities of analog optical processors.

  17. International Symposium on Optics and its Applications (OPTICS-2011)

    Science.gov (United States)

    Bhattacherjee, Aranya B.; Calvo, Maria L.; Kazaryan, Eduard M.; Papoyan, Aram V.; Sarkisyan, Hayk A.

    2012-03-01

    OPTICS Logo PREFACE The papers selected for this volume were reported at the International Symposium 'Optics and its applications' (OPTICS-2011, Yerevan & Ashtarak, Armenia, September 5-9, 2011), http://www.ipr.sci.am/optics2011/. The Symposium was organized by the SPIE Armenian Student Chapter and major Armenian R&D organizations, universities and industrial companies working in the field of basic and applied optics: Institute for Physical Research of the National Academy of Sciences of Armenia, Yerevan State University, Russian-Armenian (Slavonic) University, and LT-PYRKAL Closed Joint Stock Company. OPTICS-2011 was primarily intended to support and promote the involvement of students and young scientists in various fields of modern optics, giving them the possibility to attend invited talks by prominent scientists and to present and discuss their own results. Furthermore, the Symposium allowed foreign participants from 14 countries to become acquainted with the achievements of optical science and technology in Armenia, which became a full member of the International Commission for Optics (ICO) in 2011. To follow this concept, the Symposium sessions were held in various host institutions. The creative and friendly ambience established at OPTICS-2011 promoted further international collaboration in the field and motivated many students to take up research in optics and photonics as a career. This volume of Journal of Physics: Conference Series covers thematic sections of the Symposium (both oral and poster), which represent the main fields of interest in optics for Armenian scientists: quantum optics & information, laser spectroscopy, optical properties of nanostructures, photonics & fiber optics, and optics of liquid crystals. Such wide coverage is consistent with the general scope of the Symposium, allowing all the students involved in optics to present, discuss and publish their recent results, and for those who are making their first steps in science to choose

  18. International Conference on Advanced Computing for Innovation

    CERN Document Server

    Angelova, Galia; Agre, Gennady

    2016-01-01

    This volume is a selected collection of papers presented and discussed at the International Conference “Advanced Computing for Innovation (AComIn 2015)”. The Conference was held at 10th -11th of November, 2015 in Sofia, Bulgaria and was aimed at providing a forum for international scientific exchange between Central/Eastern Europe and the rest of the world on several fundamental topics of computational intelligence. The papers report innovative approaches and solutions in hot topics of computational intelligence – advanced computing, language and semantic technologies, signal and image processing, as well as optimization and intelligent control.

  19. International innovations in optical finishing

    Science.gov (United States)

    Jacobs, Stephen D.

    2004-10-01

    Every few years new polishing technologies attempt to make the transition from the research laboratory into the commercial sector. Success awaits any process that is well controlled and predictable (e.g., deterministic), rapid, capable of smoothing to sub-nm rms roughness levels while removing damage from grinding, affordable, and easily implemented. Applicability to different optical materials and a variety of part sizes and shapes is extremely important, but may not be required for a new technology to succeed in a niche market. This paper reviews six innovations in polishing of precision optics: Canon"s Super-Smooth Polisher (CSSP) that uses a sub-aperture pitch lap - a relatively mature but important base-line technology; Nikon / Osaka University"s RF Plasma Chemical Vaporization Machining (CVM); Epion"s Gas Cluster Ion Beam (GCIB) Process; the IOM University of Leipzig / NTGL Ion Beam Finishing (IBF) Technology; Zeeko"s "Precessions" Process with a sub-aperture section of an inflatable pad; and QED Technology"s Magnetorheological Finishing (MRF) with a magnetic fluid ribbon. The removal mechanism and some recent achievements for each process are discussed.

  20. New computation methods for geometrical optics

    CERN Document Server

    Lin, Psang Dain

    2014-01-01

    This book employs homogeneous coordinate notation to compute the first- and second-order derivative matrices of various optical quantities. It will be one of the important mathematical tools for automatic optical design. The traditional geometrical optics is based on raytracing only. It is very difficult, if possible, to compute the first- and second-order derivatives of a ray and optical path length with respect to system variables, since they are recursive functions. Consequently, current commercial software packages use a finite difference approximation methodology to estimate these derivatives for use in optical design and analysis. Furthermore, previous publications of geometrical optics use vector notation, which is comparatively awkward for computations for non-axially symmetrical systems.

  1. 2nd International Conference on Intelligent Computing, Communication & Devices

    CERN Document Server

    Popentiu-Vladicescu, Florin

    2017-01-01

    The book presents high quality papers presented at 2nd International Conference on Intelligent Computing, Communication & Devices (ICCD 2016) organized by Interscience Institute of Management and Technology (IIMT), Bhubaneswar, Odisha, India, during 13 and 14 August, 2016. The book covers all dimensions of intelligent sciences in its three tracks, namely, intelligent computing, intelligent communication and intelligent devices. intelligent computing track covers areas such as intelligent and distributed computing, intelligent grid and cloud computing, internet of things, soft computing and engineering applications, data mining and knowledge discovery, semantic and web technology, hybrid systems, agent computing, bioinformatics, and recommendation systems. Intelligent communication covers communication and network technologies, including mobile broadband and all optical networks that are the key to groundbreaking inventions of intelligent communication technologies. This covers communication hardware, soft...

  2. International Conference of Intelligence Computation and Evolutionary Computation ICEC 2012

    CERN Document Server

    Intelligence Computation and Evolutionary Computation

    2013-01-01

    2012 International Conference of Intelligence Computation and Evolutionary Computation (ICEC 2012) is held on July 7, 2012 in Wuhan, China. This conference is sponsored by Information Technology & Industrial Engineering Research Center.  ICEC 2012 is a forum for presentation of new research results of intelligent computation and evolutionary computation. Cross-fertilization of intelligent computation, evolutionary computation, evolvable hardware and newly emerging technologies is strongly encouraged. The forum aims to bring together researchers, developers, and users from around the world in both industry and academia for sharing state-of-art results, for exploring new areas of research and development, and to discuss emerging issues facing intelligent computation and evolutionary computation.

  3. Optical Turbulence above the Internal Antarctic Plateau

    CERN Document Server

    Masciadri, E; Hagelin, S; Moigne, P Le; Noilhan, J

    2010-01-01

    The internal antarctic plateau revealed in the last years to be a site with interesting potentialities for the astronomical applications due to the extreme dryness and low temperatures, the typical high altitude of the plateau, the weak level of turbulence in the free atmosphere down to a just few tens of meters from the ground and the thin optical turbulence layer developed at the ground. The main goal of a site testing assessment above the internal antarctic plateau is to characterize the site (optical turbulence and classical meteorological parameters) and to quantify which is the gain we might obtain with respect to equivalent astronomical observations done above mid-latitude sites to support plans for future astronomical facilities. Our group is involved, since a few years, in studies related to the assessment of this site for astronomical applications that include the characterization of the meteorological parameters and optical turbulence provided by general circulation models as well as mesoscale atmo...

  4. 3rd International Conference on Computational Mathematics and Computational Geometry

    CERN Document Server

    Ravindran, Anton

    2016-01-01

    This volume presents original research contributed to the 3rd Annual International Conference on Computational Mathematics and Computational Geometry (CMCGS 2014), organized and administered by Global Science and Technology Forum (GSTF). Computational Mathematics and Computational Geometry are closely related subjects, but are often studied by separate communities and published in different venues. This volume is unique in its combination of these topics. After the conference, which took place in Singapore, selected contributions chosen for this volume and peer-reviewed. The section on Computational Mathematics contains papers that are concerned with developing new and efficient numerical algorithms for mathematical sciences or scientific computing. They also cover analysis of such algorithms to assess accuracy and reliability. The parts of this project that are related to Computational Geometry aim to develop effective and efficient algorithms for geometrical applications such as representation and computati...

  5. International Conference on Computational Intelligence, Cyber Security, and Computational Models

    CERN Document Server

    Ramasamy, Vijayalakshmi; Sheen, Shina; Veeramani, C; Bonato, Anthony; Batten, Lynn

    2016-01-01

    This book aims at promoting high-quality research by researchers and practitioners from academia and industry at the International Conference on Computational Intelligence, Cyber Security, and Computational Models ICC3 2015 organized by PSG College of Technology, Coimbatore, India during December 17 – 19, 2015. This book enriches with innovations in broad areas of research like computational modeling, computational intelligence and cyber security. These emerging inter disciplinary research areas have helped to solve multifaceted problems and gained lot of attention in recent years. This encompasses theory and applications, to provide design, analysis and modeling of the aforementioned key areas.

  6. Nonlinear optics quantum computing with circuit QED.

    Science.gov (United States)

    Adhikari, Prabin; Hafezi, Mohammad; Taylor, J M

    2013-02-08

    One approach to quantum information processing is to use photons as quantum bits and rely on linear optical elements for most operations. However, some optical nonlinearity is necessary to enable universal quantum computing. Here, we suggest a circuit-QED approach to nonlinear optics quantum computing in the microwave regime, including a deterministic two-photon phase gate. Our specific example uses a hybrid quantum system comprising a LC resonator coupled to a superconducting flux qubit to implement a nonlinear coupling. Compared to the self-Kerr nonlinearity, we find that our approach has improved tolerance to noise in the qubit while maintaining fast operation.

  7. International Conference on Computational Intelligence 2015

    CERN Document Server

    Saha, Sujan

    2017-01-01

    This volume comprises the proceedings of the International Conference on Computational Intelligence 2015 (ICCI15). This book aims to bring together work from leading academicians, scientists, researchers and research scholars from across the globe on all aspects of computational intelligence. The work is composed mainly of original and unpublished results of conceptual, constructive, empirical, experimental, or theoretical work in all areas of computational intelligence. Specifically, the major topics covered include classical computational intelligence models and artificial intelligence, neural networks and deep learning, evolutionary swarm and particle algorithms, hybrid systems optimization, constraint programming, human-machine interaction, computational intelligence for the web analytics, robotics, computational neurosciences, neurodynamics, bioinspired and biomorphic algorithms, cross disciplinary topics and applications. The contents of this volume will be of use to researchers and professionals alike....

  8. Exploiting data redundancy in computational optical imaging.

    Science.gov (United States)

    Munro, Peter R T

    2015-11-30

    We present an algorithm which exploits data redundancy to make computational, coherent, optical imaging more computationally efficient. This algorithm specifically addresses the computation of how light scattered by a sample is collected and coherently detected. It is of greatest benefit in the simulation of broadband optical systems employing coherent detection, such as optical coherence tomography. Although also amenable to time-harmonic data, the algorithm is designed to be embedded within time-domain electromagnetic scattering simulators such as the psuedo-spectral and finite-difference time domain methods. We derive the algorithm in detail as well as criteria which ensure accurate execution of the algorithm. We present simulations that verify the developed algorithm and demonstrate its utility. We expect this algorithm to be important to future developments in computational imaging.

  9. International Conference on Theoretical and Computational Physics

    CERN Document Server

    2016-01-01

    Int'l Conference on Theoretical and Computational Physics (TCP 2016) will be held from August 24 to 26, 2016 in Xi'an, China. This Conference will cover issues on Theoretical and Computational Physics. It dedicates to creating a stage for exchanging the latest research results and sharing the advanced research methods. TCP 2016 will be an important platform for inspiring international and interdisciplinary exchange at the forefront of Theoretical and Computational Physics. The Conference will bring together researchers, engineers, technicians and academicians from all over the world, and we cordially invite you to take this opportunity to join us for academic exchange and visit the ancient city of Xi’an.

  10. 3rd International Workshop on Computational Engineering

    CERN Document Server

    Bischoff, Manfred; Schäfer, Michael

    2015-01-01

    This book presents selected papers from the 3rd International Workshop on Computational Engineering held in Stuttgart from October 6 to 10, 2014, bringing together innovative contributions from related fields with computer science and mathematics as an important technical basis among others. The workshop discussed the state of the art and the further evolution of numerical techniques for simulation in engineering and science. We focus on current trends in numerical simulation in science and engineering, new requirements arising from rapidly increasing parallelism in computer architectures, and novel mathematical approaches. Accordingly, the chapters of the book particularly focus on parallel algorithms and performance optimization, coupled systems, and complex applications and optimization.

  11. Preface: International Symposium on Computational Electrochemistry

    Science.gov (United States)

    Bieniasz, L. K.; Britz, D.

    2007-12-01

    Computational methods and approaches play an increasingly important role in various areas of electrochemistry, but this fact still does not find a proper reflection in the structure of electrochemical societies, nor in the calendar of international conferences or symposia. Meetings devoted to computation in electrochemistry are rare, and they are focused on specific application areas. The present symposium has been organized with the aim to bring together computationally oriented electrochemists working in diverse application areas, in order to overcome communication barriers and expose common aspects of their work. The placement of the symposium within the ICCMSE has been dictated by the intention to uncover and reinforce links between Computational Electrochemistry and Computational Science and Engineering.

  12. Optics in computing: introduction to the feature issue.

    Science.gov (United States)

    Drabik, T; Thienpont, H; Ishikawa, M

    2000-02-10

    This issue of Applied Optics features 21 papers that describe the implementation of optics in computer systems and applications. This feature is the eighth in a series on the application of optics in the field of computing.

  13. International Conference on Computer, Communication and Computational Sciences

    CERN Document Server

    Mishra, Krishn; Tiwari, Shailesh; Singh, Vivek

    2017-01-01

    Exchange of information and innovative ideas are necessary to accelerate the development of technology. With advent of technology, intelligent and soft computing techniques came into existence with a wide scope of implementation in engineering sciences. Keeping this ideology in preference, this book includes the insights that reflect the ‘Advances in Computer and Computational Sciences’ from upcoming researchers and leading academicians across the globe. It contains high-quality peer-reviewed papers of ‘International Conference on Computer, Communication and Computational Sciences (ICCCCS 2016), held during 12-13 August, 2016 in Ajmer, India. These papers are arranged in the form of chapters. The content of the book is divided into two volumes that cover variety of topics such as intelligent hardware and software design, advanced communications, power and energy optimization, intelligent techniques used in internet of things, intelligent image processing, advanced software engineering, evolutionary and ...

  14. Development of probabilistic internal dosimetry computer code

    Science.gov (United States)

    Noh, Siwan; Kwon, Tae-Eun; Lee, Jai-Ki

    2017-02-01

    Internal radiation dose assessment involves biokinetic models, the corresponding parameters, measured data, and many assumptions. Every component considered in the internal dose assessment has its own uncertainty, which is propagated in the intake activity and internal dose estimates. For research or scientific purposes, and for retrospective dose reconstruction for accident scenarios occurring in workplaces having a large quantity of unsealed radionuclides, such as nuclear power plants, nuclear fuel cycle facilities, and facilities in which nuclear medicine is practiced, a quantitative uncertainty assessment of the internal dose is often required. However, no calculation tools or computer codes that incorporate all the relevant processes and their corresponding uncertainties, i.e., from the measured data to the committed dose, are available. Thus, the objective of the present study is to develop an integrated probabilistic internal-dose-assessment computer code. First, the uncertainty components in internal dosimetry are identified, and quantitative uncertainty data are collected. Then, an uncertainty database is established for each component. In order to propagate these uncertainties in an internal dose assessment, a probabilistic internal-dose-assessment system that employs the Bayesian and Monte Carlo methods. Based on the developed system, we developed a probabilistic internal-dose-assessment code by using MATLAB so as to estimate the dose distributions from the measured data with uncertainty. Using the developed code, we calculated the internal dose distribution and statistical values ( e.g. the 2.5th, 5th, median, 95th, and 97.5th percentiles) for three sample scenarios. On the basis of the distributions, we performed a sensitivity analysis to determine the influence of each component on the resulting dose in order to identify the major component of the uncertainty in a bioassay. The results of this study can be applied to various situations. In cases of

  15. Computational cameras: convergence of optics and processing.

    Science.gov (United States)

    Zhou, Changyin; Nayar, Shree K

    2011-12-01

    A computational camera uses a combination of optics and processing to produce images that cannot be captured with traditional cameras. In the last decade, computational imaging has emerged as a vibrant field of research. A wide variety of computational cameras has been demonstrated to encode more useful visual information in the captured images, as compared with conventional cameras. In this paper, we survey computational cameras from two perspectives. First, we present a taxonomy of computational camera designs according to the coding approaches, including object side coding, pupil plane coding, sensor side coding, illumination coding, camera arrays and clusters, and unconventional imaging systems. Second, we use the abstract notion of light field representation as a general tool to describe computational camera designs, where each camera can be formulated as a projection of a high-dimensional light field to a 2-D image sensor. We show how individual optical devices transform light fields and use these transforms to illustrate how different computational camera designs (collections of optical devices) capture and encode useful visual information.

  16. Resource-efficient linear optical quantum computation.

    Science.gov (United States)

    Browne, Daniel E; Rudolph, Terry

    2005-07-01

    We introduce a scheme for linear optics quantum computation, that makes no use of teleported gates, and requires stable interferometry over only the coherence length of the photons. We achieve a much greater degree of efficiency and a simpler implementation than previous proposals. We follow the "cluster state" measurement based quantum computational approach, and show how cluster states may be efficiently generated from pairs of maximally polarization entangled photons using linear optical elements. We demonstrate the universality and usefulness of generic parity measurements, as well as introducing the use of redundant encoding of qubits to enable utilization of destructive measurements--both features of use in a more general context.

  17. Computational Techniques for LED Optical Microcavities

    OpenAIRE

    García Santiago, Xavier

    2015-01-01

    The project consist on the development of numerical methods and computational techniques to model the processes of light extraction in power LED (Light-Emitting Diodes) devices. We aim at the use of complex corrugated microstructures to boost the efficiency of our current LUXEON LED products. In order to study extraction efficiency in these devices a 3D optics model of thin film micro-structures must be developed and tested. In this project we develop a numerical model for computing and st...

  18. Internal Clock Drift Estimation in Computer Clusters

    Directory of Open Access Journals (Sweden)

    Hicham Marouani

    2008-01-01

    Full Text Available Most computers have several high-resolution timing sources, from the programmable interrupt timer to the cycle counter. Yet, even at a precision of one cycle in ten millions, clocks may drift significantly in a single second at a clock frequency of several GHz. When tracing the low-level system events in computer clusters, such as packet sending or reception, each computer system records its own events using an internal clock. In order to properly understand the global system behavior and performance, as reported by the events recorded on each computer, it is important to estimate precisely the clock differences and drift between the different computers in the system. This article studies the clock precision and stability of several computer systems, with different architectures. It also studies the typical network delay characteristics, since time synchronization algorithms rely on the exchange of network packets and are dependent on the symmetry of the delays. A very precise clock, based on the atomic time provided by the GPS satellite network, was used as a reference to measure clock drifts and network delays. The results obtained are of immediate use to all applications which depend on computer clocks or network time synchronization accuracy.

  19. 6th International Workshop Soft Computing Applications

    CERN Document Server

    Jain, Lakhmi; Kovačević, Branko

    2016-01-01

    These volumes constitute the Proceedings of the 6th International Workshop on Soft Computing Applications, or SOFA 2014, held on 24-26 July 2014 in Timisoara, Romania. This edition was organized by the University of Belgrade, Serbia in conjunction with Romanian Society of Control Engineering and Technical Informatics (SRAIT) - Arad Section, The General Association of Engineers in Romania - Arad Section, Institute of Computer Science, Iasi Branch of the Romanian Academy and IEEE Romanian Section.                 The Soft Computing concept was introduced by Lotfi Zadeh in 1991 and serves to highlight the emergence of computing methodologies in which the accent is on exploiting the tolerance for imprecision and uncertainty to achieve tractability, robustness and low solution cost. Soft computing facilitates the use of fuzzy logic, neurocomputing, evolutionary computing and probabilistic computing in combination, leading to the concept of hybrid intelligent systems.        The combination of ...

  20. International Symposium on Computing and Network Sustainability

    CERN Document Server

    Akashe, Shyam

    2017-01-01

    The book is compilation of technical papers presented at International Research Symposium on Computing and Network Sustainability (IRSCNS 2016) held in Goa, India on 1st and 2nd July 2016. The areas covered in the book are sustainable computing and security, sustainable systems and technologies, sustainable methodologies and applications, sustainable networks applications and solutions, user-centered services and systems and mobile data management. The novel and recent technologies presented in the book are going to be helpful for researchers and industries in their advanced works.

  1. International Conference on Soft Computing Systems

    CERN Document Server

    Panigrahi, Bijaya

    2016-01-01

    The book is a collection of high-quality peer-reviewed research papers presented in International Conference on Soft Computing Systems (ICSCS 2015) held at Noorul Islam Centre for Higher Education, Chennai, India. These research papers provide the latest developments in the emerging areas of Soft Computing in Engineering and Technology. The book is organized in two volumes and discusses a wide variety of industrial, engineering and scientific applications of the emerging techniques. It presents invited papers from the inventors/originators of new applications and advanced technologies.

  2. Optical coherence tomography used for internal biometrics

    Science.gov (United States)

    Chang, Shoude; Sherif, Sherif; Mao, Youxin; Flueraru, Costel

    2007-06-01

    Traditional biometric technologies used for security and person identification essentially deal with fingerprints, hand geometry and face images. However, because all these technologies use external features of human body, they can be easily fooled and tampered with by distorting, modifying or counterfeiting these features. Nowadays, internal biometrics which detects the internal ID features of an object is becoming increasingly important. Being capable of exploring under-skin structure, optical coherence tomography (OCT) system can be used as a powerful tool for internal biometrics. We have applied fiber-optic and full-field OCT systems to detect the multiple-layer 2D images and 3D profile of the fingerprints, which eventually result in a higher discrimination than the traditional 2D recognition methods. More importantly, the OCT based fingerprint recognition has the ability to easily distinguish artificial fingerprint dummies by analyzing the extracted layered surfaces. Experiments show that our OCT systems successfully detected the dummy, which was made of plasticene and was used to bypass the commercially available fingerprint scanning system with a false accept rate (FAR) of 100%.

  3. Optical encryption with selective computational ghost imaging

    Science.gov (United States)

    Zafari, Mohammad; kheradmand, Reza; Ahmadi-Kandjani, Sohrab

    2014-10-01

    Selective computational ghost imaging (SCGI) is a technique which enables the reconstruction of an N-pixel image from N measurements or less. In this paper we propose an optical encryption method based on SCGI and experimentally demonstrate that this method has much higher security under eavesdropping and unauthorized accesses compared with previous reported methods.

  4. International Symposium on Scientific Computing, Computer Arithmetic and Validated Numerics

    CERN Document Server

    DEVELOPMENTS IN RELIABLE COMPUTING

    1999-01-01

    The SCAN conference, the International Symposium on Scientific Com­ puting, Computer Arithmetic and Validated Numerics, takes place bian­ nually under the joint auspices of GAMM (Gesellschaft fiir Angewandte Mathematik und Mechanik) and IMACS (International Association for Mathematics and Computers in Simulation). SCAN-98 attracted more than 100 participants from 21 countries all over the world. During the four days from September 22 to 25, nine highlighted, plenary lectures and over 70 contributed talks were given. These figures indicate a large participation, which was partly caused by the attraction of the organizing country, Hungary, but also the effec­ tive support system have contributed to the success. The conference was substantially supported by the Hungarian Research Fund OTKA, GAMM, the National Technology Development Board OMFB and by the J6zsef Attila University. Due to this funding, it was possible to subsidize the participation of over 20 scientists, mainly from Eastern European countries. I...

  5. Topics in linear optical quantum computation

    Science.gov (United States)

    Glancy, Scott Charles

    This thesis covers several topics in optical quantum computation. A quantum computer is a computational device which is able to manipulate information by performing unitary operations on some physical system whose state can be described as a vector (or mixture of vectors) in a Hilbert space. The basic unit of information, called the qubit, is considered to be a system with two orthogonal states, which are assigned logical values of 0 and 1. Photons make excellent candidates to serve as qubits. They have little interactions with the environment. Many operations can be performed using very simple linear optical devices such as beam splitters and phase shifters. Photons can easily be processed through circuit-like networks. Operations can be performed in very short times. Photons are ideally suited for the long-distance communication of quantum information. The great difficulty in constructing an optical quantum computer is that photons naturally interact weakly with one another. This thesis first gives a brief review of two early approaches to optical quantum computation. It will describe how any discrete unitary operation can be performed using a single photon and a network of beam splitters, and how the Kerr effect can be used to construct a two photon logic gate. Second, this work provides a thorough introduction to the linear optical quantum computer developed by Knill, Laflamme, and Milburn. It then presents this author's results on the reliability of this scheme when implemented using imperfect photon detectors. This author finds that quantum computers of this sort cannot be built using current technology. Third, this dissertation describes a method for constructing a linear optical quantum computer using nearly orthogonal coherent states of light as the qubits. It shows how a universal set of logic operations can be performed, including calculations of the fidelity with which these operations may be accomplished. It discusses methods for reducing and

  6. Optical neural computing for associative memories

    Energy Technology Data Exchange (ETDEWEB)

    Hsu, Ken Yuh.

    1990-01-01

    Optical techniques for implementing neural computers are presented. In particular, holographic associative memories with feedback are investigated. Characteristics of optical neurons and optical interconnections are discussed. An LCLV is used for simulating a 2-D array of approximately 160,000 optical neurons. Thermoplastic plates are used for providing holographic interconnections among these neurons. The problem of degenerate readout in holographic interconnections and the method of sampling grids to solve this problem are presented. Two optical neural networks for associative memories are implemented and demonstrated. The first one is an optical implementation of the Hopfield network. It performs the function of auto-association that recognizes 2-D images from a distorted or partially blocked input. The trade-off between distortion tolerance and discrimination capability against new images is discussed. The second optical loop is a 2-layer network with feedback. It performs the function of hetero-association, which locks the recognized input and its associated image as a stable state in the loop. In both optical loops, it is shown that the neural gain and the similarity between the input and the stored images are the main factors that determine the dynamics of the network. Neural network models for the optical loops are presented. Equations of motion for describing the dynamical behavior of the systems are derived. The reciprocal vector basis corresponding to stored images is derived. A geometrical method is then introduced which allows us to inspect the convergence property of the system. It is also shown that the main factors that determine the system dynamics are the neural gain and the initial conditions. Photorefractive holography for optical interconnections and sampling grids for volume holographic interconnections are presented.

  7. Multivariate optical computation for predictive spectroscopy.

    Science.gov (United States)

    Nelson, M P; Aust, J F; Dobrowolski, J A; Verly, P G; Myrick, M L

    1998-01-01

    A novel optical approach to predicting chemical and physical properties based on principal component analysis (PCA) is proposed and evaluated using a data set from earlier work. In our approach, a regression vector produced by PCA is designed into the structure of a set of paired optical filters. Light passing through the paired filters produces an analog detector signal that is directly proportional to the chemical/physical property for which the regression vector was designed. This simple optical computational method for predictive spectroscopy is evaluated in several ways, using the example data for numeric simulation. First, we evaluate the sensitivity of the method to various types of spectroscopic errors commonly encountered and find the method to have the same susceptibilities toward error as standard methods. Second, we use propagation of errors to determine the effects of detector noise on the predictive power of the method, finding the optical computation approach to have a large multiplex advantage over conventional methods. Third, we use two different design approaches to the construction of the paired filter set for the example measurement to evaluate manufacturability, finding that adequate methods exist to design appropriate optical devices. Fourth, we numerically simulate the predictive errors introduced by design errors in the paired filters, finding that predictive errors are not increased over conventional methods. Fifth, we consider how the performance of the method is affected by light intensities that are not linearly related to chemical composition (as in transmission spectroscopy) and find that the method is only marginally affected. In summary, we conclude that many types of predictive measurements based on use of regression (or other) vectors and linear mathematics can be performed more rapidly, more effectly, and at considerably lower cost by the proposed optical computation method than by traditional dispersive or interferometric

  8. Radiative transfer computations for optical beams

    CERN Document Server

    Kim, A D

    2003-01-01

    In this paper, we present a method for computing direct numerical simulations of narrow optical beam waves propagating and scattering in a plane-parallel medium. For these computations, we use Fourier and Chebyshev spectral methods for three-dimensional radiative transfer that also includes polar and azimuthal angle dependences. We treat anisotropic scattering with peaked forward scattering by using a Clenshaw-Curtis quadrature rule for the polar angle and an extended trapezoid rule for the azimuthal angle. To verify our results, we compare this spectral method to Monte Carlo simulations.

  9. Second International workshop Geometry and Symbolic Computation

    CERN Document Server

    Walczak, Paweł; Geometry and its Applications

    2014-01-01

    This volume has been divided into two parts: Geometry and Applications. The geometry portion of the book relates primarily to geometric flows, laminations, integral formulae, geometry of vector fields on Lie groups, and osculation; the articles in the applications portion concern some particular problems of the theory of dynamical systems, including mathematical problems of liquid flows and a study of cycles for non-dynamical systems. This Work is based on the second international workshop entitled "Geometry and Symbolic Computations," held on May 15-18, 2013 at the University of Haifa and is dedicated to modeling (using symbolic calculations) in differential geometry and its applications in fields such as computer science, tomography, and mechanics. It is intended to create a forum for students and researchers in pure and applied geometry to promote discussion of modern state-of-the-art in geometric modeling using symbolic programs such as Maple™ and Mathematica®, as well as presentation of new results. ...

  10. Computer Modeling for Optical Waveguide Sensors.

    Science.gov (United States)

    1987-12-15

    COSATI CODES 18 SUBJECT TERMS (Continue on reverse it necessary and cleritify by DIock numnerl FIEL GRUP SB-GOUP Optical waveguide sensors Computer...reflection. The resultant probe beam transmission may be plotted as a function of changes in the refractive index of the surrounding fluid medium. BASIC...all angles of incidence about the critical angle ecr. It should be noted that N in equation (3) is a function of e, since = sin - l sin 8 , see

  11. Optical Linear Algebra for Computational Light Transport

    Science.gov (United States)

    O'Toole, Matthew

    Active illumination refers to optical techniques that use controllable lights and cameras to analyze the way light propagates through the world. These techniques confer many unique imaging capabilities (e.g. high-precision 3D scanning, image-based relighting, imaging through scattering media), but at a significant cost; they often require long acquisition and processing times, rely on predictive models for light transport, and cease to function when exposed to bright ambient sunlight. We develop a mathematical framework for describing and analyzing such imaging techniques. This framework is deeply rooted in numerical linear algebra, and models the transfer of radiant energy through an unknown environment with the so-called light transport matrix. Performing active illumination on a scene equates to applying a numerical operator on this unknown matrix. The brute-force approach to active illumination follows a two-step procedure: (1) optically measure the light transport matrix and (2) evaluate the matrix operator numerically. This approach is infeasible in general, because the light transport matrix is often much too large to measure, store, and analyze directly. Using principles from optical linear algebra, we evaluate these matrix operators in the optical domain, without ever measuring the light transport matrix in the first place. Specifically, we explore numerical algorithms that can be implemented partially or fully with programmable optics. These optical algorithms provide solutions to many longstanding problems in computer vision and graphics, including the ability to (1) photo-realistically change the illumination conditions of a given photo with only a handful of measurements, (2) accurately capture the 3D shape of objects in the presence of complex transport properties and strong ambient illumination, and (3) overcome the multipath interference problem associated with time-of-flight cameras. Most importantly, we introduce an all-new imaging regime---optical

  12. Computational algorithms for simulations in atmospheric optics.

    Science.gov (United States)

    Konyaev, P A; Lukin, V P

    2016-04-20

    A computer simulation technique for atmospheric and adaptive optics based on parallel programing is discussed. A parallel propagation algorithm is designed and a modified spectral-phase method for computer generation of 2D time-variant random fields is developed. Temporal power spectra of Laguerre-Gaussian beam fluctuations are considered as an example to illustrate the applications discussed. Implementation of the proposed algorithms using Intel MKL and IPP libraries and NVIDIA CUDA technology is shown to be very fast and accurate. The hardware system for the computer simulation is an off-the-shelf desktop with an Intel Core i7-4790K CPU operating at a turbo-speed frequency up to 5 GHz and an NVIDIA GeForce GTX-960 graphics accelerator with 1024 1.5 GHz processors.

  13. International Conference on Coherence and Quantum Optics

    CERN Document Server

    RECENT DEVELOPMENTS IN QUANTUM OPTICS

    1993-01-01

    This volume is composed of papers (invited and contributed) presented at the International Conference on Coherence and Quantum Optics held at the University of Hyderabad January 5-January 10, 1991. It has been organized by Professor Girish Agarwal and his colleagues at the School of Physics, University of Hyderabad, Hyder­ abad, India under partial support from the Department of Science and Technology, Government of India, International Center for Theoretical Physics, Trieste, Italy and the National Science Foundation, USA. Without the untiring efforts of Prof. Girish Agarwal and the members of his quantum office group, the Conference and the present volume would not have been possible. Some extraordinary circumstances resulted in a delay of the publication of the present volume. Our sincere apologies to all the authors. We deeply regret the inconvenience caused due to the delay. A debt of gratitude is due to Ms. Kim Bella for the excellent typing job of the different versions and the final version of the ma...

  14. Variational optical flow computation in real time.

    Science.gov (United States)

    Bruhn, Andrés; Weickert, Joachim; Feddern, Christian; Kohlberger, Timo; Schnörr, Christoph

    2005-05-01

    This paper investigates the usefulness of bidirectional multigrid methods for variational optical flow computations. Although these numerical schemes are among the fastest methods for solving equation systems, they are rarely applied in the field of computer vision. We demonstrate how to employ those numerical methods for the treatment of variational optical flow formulations and show that the efficiency of this approach even allows for real-time performance on standard PCs. As a representative for variational optic flow methods, we consider the recently introduced combined local-global method. It can be considered as a noise-robust generalization of the Horn and Schunck technique. We present a decoupled, as well as a coupled, version of the classical Gauss-Seidel solver, and we develop several multgrid implementations based on a discretization coarse grid approximation. In contrast, with standard bidirectional multigrid algorithms, we take advantage of intergrid transfer operators that allow for nondyadic grid hierarchies. As a consequence, no restrictions concerning the image size or the number of traversed levels have to be imposed. In the experimental section, we juxtapose the developed multigrid schemes and demonstrate their superior performance when compared to unidirectional multgrid methods and nonhierachical solvers. For the well-known 316 x 252 Yosemite sequence, we succeeded in computing the complete set of dense flow fields in three quarters of a second on a 3.06-GHz Pentium4 PC. This corresponds to a frame rate of 18 flow fields per second which outperforms the widely-used Gauss-Seidel method by almost three orders of magnitude.

  15. Optical high-performance computing: introduction to the JOSA A and Applied Optics feature.

    Science.gov (United States)

    Caulfield, H John; Dolev, Shlomi; Green, William M J

    2009-08-01

    The feature issues in both Applied Optics and the Journal of the Optical Society of America A focus on topics of immediate relevance to the community working in the area of optical high-performance computing.

  16. Parallel reservoir computing using optical amplifiers.

    Science.gov (United States)

    Vandoorne, Kristof; Dambre, Joni; Verstraeten, David; Schrauwen, Benjamin; Bienstman, Peter

    2011-09-01

    Reservoir computing (RC), a computational paradigm inspired on neural systems, has become increasingly popular in recent years for solving a variety of complex recognition and classification problems. Thus far, most implementations have been software-based, limiting their speed and power efficiency. Integrated photonics offers the potential for a fast, power efficient and massively parallel hardware implementation. We have previously proposed a network of coupled semiconductor optical amplifiers as an interesting test case for such a hardware implementation. In this paper, we investigate the important design parameters and the consequences of process variations through simulations. We use an isolated word recognition task with babble noise to evaluate the performance of the photonic reservoirs with respect to traditional software reservoir implementations, which are based on leaky hyperbolic tangent functions. Our results show that the use of coherent light in a well-tuned reservoir architecture offers significant performance benefits. The most important design parameters are the delay and the phase shift in the system's physical connections. With optimized values for these parameters, coherent semiconductor optical amplifier (SOA) reservoirs can achieve better results than traditional simulated reservoirs. We also show that process variations hardly degrade the performance, but amplifier noise can be detrimental. This effect must therefore be taken into account when designing SOA-based RC implementations.

  17. Computing Temperatures in Optically Thick Protoplanetary Disks

    Science.gov (United States)

    Capuder, Lawrence F.. Jr.

    2011-01-01

    We worked with a Monte Carlo radiative transfer code to simulate the transfer of energy through protoplanetary disks, where planet formation occurs. The code tracks photons from the star into the disk, through scattering, absorption and re-emission, until they escape to infinity. High optical depths in the disk interior dominate the computation time because it takes the photon packet many interactions to get out of the region. High optical depths also receive few photons and therefore do not have well-estimated temperatures. We applied a modified random walk (MRW) approximation for treating high optical depths and to speed up the Monte Carlo calculations. The MRW is implemented by calculating the average number of interactions the photon packet will undergo in diffusing within a single cell of the spatial grid and then updating the packet position, packet frequencies, and local radiation absorption rate appropriately. The MRW approximation was then tested for accuracy and speed compared to the original code. We determined that MRW provides accurate answers to Monte Carlo Radiative transfer simulations. The speed gained from using MRW is shown to be proportional to the disk mass.

  18. Development of domestic and international computer forensics

    OpenAIRE

    Yang, Y; Chow, KP; Xu, R

    2011-01-01

    With the increasing of computer crime, instant emergence of new digital product, new computer technology and computer forensics technology is promoted, developed constantly. This paper described basic information/content of computer forensics, and elaborated the development of current computer forensics at domestic and overseas market. The trends of computer forensics are pointed out and recent hot topics of research are introduced. © 2011 IEEE.

  19. 1st International Conference on Computational Intelligence and Informatics

    CERN Document Server

    Prasad, V; Rani, B; Udgata, Siba; Raju, K

    2017-01-01

    The book covers a variety of topics which include data mining and data warehousing, high performance computing, parallel and distributed computing, computational intelligence, soft computing, big data, cloud computing, grid computing, cognitive computing, image processing, computer networks, wireless networks, social networks, wireless sensor networks, information and network security, web security, internet of things, bioinformatics and geoinformatics. The book is a collection of best papers submitted in the First International Conference on Computational Intelligence and Informatics (ICCII 2016) held during 28-30 May 2016 at JNTUH CEH, Hyderabad, India. It was hosted by Department of Computer Science and Engineering, JNTUH College of Engineering in association with Division V (Education & Research) CSI, India. .

  20. PREFACE: 3rd International Symposium ''Optics and its Applications''

    Science.gov (United States)

    Calvo, M. L.; Dolganova, I. N.; Gevorgyan, N.; Guzman, A.; Papoyan, A.; Sarkisyan, H.; Yurchenko, S.

    2016-01-01

    The SPIE.FOCUS Armenia: 3rd International Symposium ''Optics and its Applications'' (OPTICS-2015) http://rau.am/optics2015/ was held in Yerevan, Armenia, in the period October 1 - 5, 2015. The symposium was organized by the International Society for Optics and Photonics (SPIE), the Armenian SPIE student chapter with collaboration of the Armenian TC of ICO, the Russian-Armenian University (RAU), the Institute for Physical Research of National Academy of Sciences of Armenia (IPR of NAS), the Greek-Armenian industrial company LT-PYRKAL, and the Yerevan State University (YSU). The Symposium was co-organized by the SPIE & OSA student chapters of BMSTU, the Armenian OSA student chapter, and the SPIE student chapters of Lund University and Wroclaw University of Technology. The symposium OPTICS-2015 was dedicated to the International Year of Light and Light-Based Technologies. OPTICS-2015 was devoted to modern topics and optical technologies such as: optical properties of nanostructures, silicon photonics, quantum optics, singular optics & its applications, laser spectroscopy, strong field optics, biomedical optics, nonlinear & ultrafast optics, photonics & fiber optics, and mathematical methods in optics. OPTICS-2015 was attended by 100 scientists and students representing 17 countries: Armenia, China, Czech Republic, France, Georgia, Germany, India, Iran, Italy, Latvia, Mexico, Poland, Russia, Saudi Arabia, Sweden, Ukraine, and USA. Such a broad international community confirmed the important mission of science to be a uniting force between different countries, religions, and nations. We hope that OPTICS-2015 inspired and motivated students and young scientists to work in optics and in science in general. The present volume of Journal of Physics: Conference Series includes proceedings of the symposium covering various aspects of modern problems in optics. We are grateful to all people who were involved in the organization process. We gratefully acknowledge support from

  1. 4th International Joint Conference on Computational Intelligence

    CERN Document Server

    Correia, António; Rosa, Agostinho; Filipe, Joaquim

    2015-01-01

    The present book includes extended and revised versions of a set of selected papers from the Fourth International Joint Conference on Computational Intelligence (IJCCI 2012)., held in Barcelona, Spain, from 5 to 7 October, 2012. The conference was sponsored by the Institute for Systems and Technologies of Information, Control and Communication (INSTICC) and was organized in cooperation with the Association for the Advancement of Artificial Intelligence (AAAI). The conference brought together researchers, engineers and practitioners in computational technologies, especially those related to the areas of fuzzy computation, evolutionary computation and neural computation. It is composed of three co-located conferences, each one specialized in one of the aforementioned -knowledge areas. Namely: - International Conference on Evolutionary Computation Theory and Applications (ECTA) - International Conference on Fuzzy Computation Theory and Applications (FCTA) - International Conference on Neural Computation Theory a...

  2. Third International Joint Conference on Computational Intelligence (IJCCI 2011)

    CERN Document Server

    Dourado, António; Rosa, Agostinho; Filipe, Joaquim; Computational Intelligence

    2013-01-01

    The present book includes a set of selected extended papers from the third International Joint Conference on Computational Intelligence (IJCCI 2011), held in Paris, France, from 24 to 26 October 2011. The conference was composed of three co-located conferences:  The International Conference on Fuzzy Computation (ICFC), the International Conference on Evolutionary Computation (ICEC), and the International Conference on Neural Computation (ICNC). Recent progresses in scientific developments and applications in these three areas are reported in this book. IJCCI received 283 submissions, from 59 countries, in all continents. This book includes the revised and extended versions of a strict selection of the best papers presented at the conference.

  3. 7th International Joint Conference on Computational Intelligence

    CERN Document Server

    Rosa, Agostinho; Cadenas, José; Correia, António; Madani, Kurosh; Ruano, António; Filipe, Joaquim

    2017-01-01

    This book includes a selection of revised and extended versions of the best papers from the seventh International Joint Conference on Computational Intelligence (IJCCI 2015), held in Lisbon, Portugal, from 12 to 14 November 2015, which was composed of three co-located conferences: The International Conference on Evolutionary Computation Theory and Applications (ECTA), the International Conference on Fuzzy Computation Theory and Applications (FCTA), and the International Conference on Neural Computation Theory and Applications (NCTA). The book presents recent advances in scientific developments and applications in these three areas, reflecting the IJCCI’s commitment to high quality standards.

  4. 12th International Conference on Computer Graphics Theory and Applications

    CERN Document Server

    2017-01-01

    The International Conference on Computer Graphics Theory and Applications aims at becoming a major point of contact between researchers, engineers and practitioners in Computer Graphics. The conference will be structured along five main tracks, covering different aspects related to Computer Graphics, from Modelling to Rendering, including Animation, Interactive Environments and Social Agents In Computer Graphics.

  5. 5th International Workshop on Information Optics

    CERN Document Server

    Javidi, Bahram; Vallmitjana, Santiago

    2006-01-01

    Optical and photonic systems and devices have significant potential for homeland security. This title presents significant technical contributions from leaders of industry, government, and academia in the field of optical and photonic sensors, systems and devices for detection, identification, prevention, sensing, security, verification, and more.

  6. Computational toolbox for optical tweezers in geometrical optics

    CERN Document Server

    Callegari, Agnese; Gököz, A Burak; Volpe, Giovanni

    2014-01-01

    Optical tweezers have found widespread application in many fields, from physics to biology. Here, we explain in detail how optical forces and torques can be described within the geometrical optics approximation and we show that this approximation provides reliable results in agreement with experiments for particles whose characteristic dimensions are larger than the wavelength of the trapping light. Furthermore, we provide an object-oriented software package implemented in MatLab for the calculation of optical forces and torques in the geometrical optics regime: \\texttt{OTGO - Optical Tweezers in Geometrical Optics}. We provide all source codes for \\texttt{OTGO} as well as the documentation and code examples -- e.g., standard optical tweezers, optical tweezers with elongated particle, windmill effect, Kramers transitions between two optical traps -- necessary to enable users to effectively employ it in their research and teaching.

  7. 6th International Conference on Computer Science and its Applications

    CERN Document Server

    Stojmenovic, Ivan; Jeong, Hwa; Yi, Gangman

    2015-01-01

    The 6th FTRA International Conference on Computer Science and its Applications (CSA-14) will be held in Guam, USA, Dec. 17 - 19, 2014. CSA-14 presents a comprehensive conference focused on the various aspects of advances in engineering systems in computer science, and applications, including ubiquitous computing, U-Health care system, Big Data, UI/UX for human-centric computing, Computing Service, Bioinformatics and Bio-Inspired Computing and will show recent advances on various aspects of computing technology, Ubiquitous Computing Services and its application.

  8. Computational optical sensing and imaging: introduction to feature issue.

    Science.gov (United States)

    Gerwe, David R; Harvey, Andrew; Gehm, Michael E

    2013-04-01

    The 2012 Computational Optical Sensing and Imaging (COSI) conference of the Optical Society of America was one of six colocated meetings composing the Imaging and Applied Optics Congress held in Monterey, California, 24-28 June. COSI, together with the Imaging Systems and Applications, Optical Sensors, Applied Industrial Optics, and Optical Remote Sensing of the Environment conferences, brought together a diverse group of scientists and engineers sharing a common interest in measuring and processing of information carried by optical fields. This special feature includes several papers based on presentations given at the 2012 COSI conference as well as independent contributions, which together highlight several important trends.

  9. Spiral intensity patterns in the internally pumped optical parametric oscillator

    DEFF Research Database (Denmark)

    Lodahl, Peter; Bache, Morten; Saffman, Mark

    2001-01-01

    We describe a nonlinear optical system that supports spiral pattern solutions in the field intensity. This new spatial structure is found to bifurcate above a secondary instability in the internally pumped optical parametric oscillator. The analytical predictions of threshold and spatial scale...

  10. 6th International Workshop on Computational Kinematics

    CERN Document Server

    Gracia, Alba

    2014-01-01

    Computational kinematics is an enthralling area of science with a rich spectrum of problems at the junction of mechanics, robotics, computer science, mathematics, and computer graphics. The covered topics include design and optimization of cable-driven robots, analysis of parallel manipulators, motion planning, numerical methods for mechanism calibration and optimization, geometric approaches to mechanism analysis and design, synthesis of mechanisms, kinematical issues in biomechanics, construction of novel mechanical devices, as well as detection and treatment of singularities. The results should be of interest for practicing and research engineers as well as Ph.D. students from the fields of mechanical and electrical engineering, computer science, and computer graphics. Indexed in Conference Proceedings Citation Index- Science (CPCI-S).

  11. International Conference on Mathematics and Computing

    CERN Document Server

    Giri, Debasis; Saxena, P; Srivastava, P

    2014-01-01

    This book discusses recent developments and contemporary research in mathematics, statistics and their applications in computing. All contributing authors are eminent academicians, scientists, researchers and scholars in their respective fields, hailing from around the world. The conference has emerged as a powerful forum, offering researchers a venue to discuss, interact and collaborate, and stimulating the advancement of mathematics and its applications in computer science. The book will allow aspiring researchers to update their knowledge of cryptography, algebra, frame theory, optimizations, stochastic processes, compressive sensing, functional analysis, complex variables, etc. Educating future consumers, users, producers, developers and researchers in mathematics and computing is a challenging task and essential to the development of modern society. Hence, mathematics and its applications in computer science are of vital importance to a broad range of communities, including mathematicians and computing p...

  12. Optical computation based on nonlinear total reflectional optical switch at the interface

    Indian Academy of Sciences (India)

    Jianqi Zhang; Huan Xu

    2009-03-01

    A new scheme of binary half adder and full adder is proposed. It realizes a kind of all-optical computation which is based on the polarization coding technique and the nonlinear total reflectional optical switches.

  13. Computer assisted optical biopsy for colorectal polyps

    Science.gov (United States)

    Navarro-Avila, Fernando J.; Saint-Hill-Febles, Yadira; Renner, Janis; Klare, Peter; von Delius, Stefan; Navab, Nassir; Mateus, Diana

    2017-03-01

    We propose a method for computer-assisted optical biopsy for colorectal polyps, with the final goal of assisting the medical expert during the colonoscopy. In particular, we target the problem of automatic classification of polyp images in two classes: adenomatous vs non-adenoma. Our approach is based on recent advancements in convolutional neural networks (CNN) for image representation. In the paper, we describe and compare four different methodologies to address the binary classification task: a baseline with classical features and a Random Forest classifier, two methods based on features obtained from a pre-trained network, and finally, the end-to-end training of a CNN. With the pre-trained network, we show the feasibility of transferring a feature extraction mechanism trained on millions of natural images, to the task of classifying adenomatous polyps. We then demonstrate further performance improvements when training the CNN for our specific classification task. In our study, 776 polyp images were acquired and histologically analyzed after polyp resection. We report a performance increase of the CNN-based approaches with respect to both, the conventional engineered features and to a state-of-the-art method based on videos and 3D shape features.

  14. Physical Optics Based Computational Imaging Systems

    Science.gov (United States)

    Olivas, Stephen Joseph

    There is an ongoing demand on behalf of the consumer, medical and military industries to make lighter weight, higher resolution, wider field-of-view and extended depth-of-focus cameras. This leads to design trade-offs between performance and cost, be it size, weight, power, or expense. This has brought attention to finding new ways to extend the design space while adhering to cost constraints. Extending the functionality of an imager in order to achieve extraordinary performance is a common theme of computational imaging, a field of study which uses additional hardware along with tailored algorithms to formulate and solve inverse problems in imaging. This dissertation details four specific systems within this emerging field: a Fiber Bundle Relayed Imaging System, an Extended Depth-of-Focus Imaging System, a Platform Motion Blur Image Restoration System, and a Compressive Imaging System. The Fiber Bundle Relayed Imaging System is part of a larger project, where the work presented in this thesis was to use image processing techniques to mitigate problems inherent to fiber bundle image relay and then, form high-resolution wide field-of-view panoramas captured from multiple sensors within a custom state-of-the-art imager. The Extended Depth-of-Focus System goals were to characterize the angular and depth dependence of the PSF of a focal swept imager in order to increase the acceptably focused imaged scene depth. The goal of the Platform Motion Blur Image Restoration System was to build a system that can capture a high signal-to-noise ratio (SNR), long-exposure image which is inherently blurred while at the same time capturing motion data using additional optical sensors in order to deblur the degraded images. Lastly, the objective of the Compressive Imager was to design and build a system functionally similar to the Single Pixel Camera and use it to test new sampling methods for image generation and to characterize it against a traditional camera. These computational

  15. International Conference on Computational Engineering Science

    CERN Document Server

    Yagawa, G

    1988-01-01

    The aim of this Conference was to become a forum for discussion of both academic and industrial research in those areas of computational engineering science and mechanics which involve and enrich the rational application of computers, numerical methods, and mechanics, in modern technology. The papers presented at this Conference cover the following topics: Solid and Structural Mechanics, Constitutive Modelling, Inelastic and Finite Deformation Response, Transient Analysis, Structural Control and Optimization, Fracture Mechanics and Structural Integrity, Computational Fluid Dynamics, Compressible and Incompressible Flow, Aerodynamics, Transport Phenomena, Heat Transfer and Solidification, Electromagnetic Field, Related Soil Mechanics and MHD, Modern Variational Methods, Biomechanics, and Off-Shore-Structural Mechanics.

  16. International Conference on Laser Physics and Quantum Optics

    CERN Document Server

    Xie, Shengwu; Zhu, Shi-Yao; Scully, Marlan

    2000-01-01

    Since the advent of the laser about 40 years ago, the field of laser physics and quantum optics have evolved into a major discipline. The early studies included the optical coherence theory and the semiclassical and quantum mechanical theories of the laser. More recently many new and interesting effects have been predicted. These include the role of coherent atomic effects in lasing without inversion and electromagnetically induced transparency, atom optics, laser cooling and trapping, teleportation, the single-atom micromaser and its role in quantum measurement theory, to name a few. The International Conference on Laser Physics and Quantum Optics was held in Shanghai from August 25 to August 28, 1999, to discuss these and many other exciting developments in laser physics and quantum optics. The international character of the conference was manifested by the fact that scientists from over 13 countries participated and lectured at the conference. There were four keynote lectures delivered by Nobel laureate Wi...

  17. 3rd International Conference on Computer & Communication Technologies

    CERN Document Server

    Bhateja, Vikrant; Raju, K; Janakiramaiah, B

    2017-01-01

    The book is a compilation of high-quality scientific papers presented at the 3rd International Conference on Computer & Communication Technologies (IC3T 2016). The individual papers address cutting-edge technologies and applications of soft computing, artificial intelligence and communication. In addition, a variety of further topics are discussed, which include data mining, machine intelligence, fuzzy computing, sensor networks, signal and image processing, human-computer interaction, web intelligence, etc. As such, it offers readers a valuable and unique resource.

  18. International Conference on Frontiers of Intelligent Computing : Theory and Applications

    CERN Document Server

    Bhateja, Vikrant; Udgata, Siba; Pattnaik, Prasant

    2017-01-01

    The book is a collection of high-quality peer-reviewed research papers presented at International Conference on Frontiers of Intelligent Computing: Theory and applications (FICTA 2016) held at School of Computer Engineering, KIIT University, Bhubaneswar, India during 16 – 17 September 2016. The book presents theories, methodologies, new ideas, experiences and applications in all areas of intelligent computing and its applications to various engineering disciplines like computer science, electronics, electrical and mechanical engineering.

  19. International Conference on Computational Vision and Robotics

    CERN Document Server

    2015-01-01

    Computer Vision and Robotic is one of the most challenging areas of 21st century. Its application ranges from Agriculture to Medicine, Household applications to Humanoid, Deep-sea-application to Space application, and Industry applications to Man-less-plant. Today’s technologies demand to produce intelligent machine, which are enabling applications in various domains and services. Robotics is one such area which encompasses number of technology in it and its application is widespread. Computational vision or Machine vision is one of the most challenging tools for the robot to make it intelligent.   This volume covers chapters from various areas of Computational Vision such as Image and Video Coding and Analysis, Image Watermarking, Noise Reduction and Cancellation, Block Matching and Motion Estimation, Tracking of Deformable Object using Steerable Pyramid Wavelet Transformation, Medical Image Fusion, CT and MRI Image Fusion based on Stationary Wavelet Transform. The book also covers articles from applicati...

  20. International Symposium on Complex Computing-Networks

    CERN Document Server

    Sevgi, L; CCN2005; Complex computing networks: Brain-like and wave-oriented electrodynamic algorithms

    2006-01-01

    This book uniquely combines new advances in the electromagnetic and the circuits&systems theory. It integrates both fields regarding computational aspects of common interest. Emphasized subjects are those methods which mimic brain-like and electrodynamic behaviour; among these are cellular neural networks, chaos and chaotic dynamics, attractor-based computation and stream ciphers. The book contains carefully selected contributions from the Symposium CCN2005. Pictures from the bestowal of Honorary Doctorate degrees to Leon O. Chua and Leopold B. Felsen are included.

  1. Computer optics and photonics for students of laser engineering disciplines

    Science.gov (United States)

    Zakharov, V. P.

    2005-10-01

    The concept of teaching in optics and photonics for undergraduate and post-graduate students of laser engineering disciplines are discussed. The designed curriculum include as fundamental knowledge on modern mathematics, physics and computer methods as up-to-date industrial optical engineering software training. Distributed Web-server technology with Alpha cluster station background allow to support real-time training and teaching with a set of computer optical laboratories, which are used as a framework for most university special courses. Remote access to facilities of Russian Academy of Science make it possible to accumulate modern science achievements in optical education.

  2. Second International Joint Conference on Computational Intelligence (IJCCI 2010)

    CERN Document Server

    Correia, António; Rosa, Agostinho; Filipe, Joaquim; Computational Intelligence

    2012-01-01

    The present book includes a set of selected extended papers from the second International Joint Conference on Computational Intelligence (IJCCI 2010), held in Valencia, Spain, from 24 to 26 October 2010. The conference was composed by three co-located conferences:  The International Conference on Fuzzy Computation (ICFC), the International Conference on Evolutionary Computation (ICEC), and the International Conference on Neural Computation (ICNC). Recent progresses in scientific developments and applications in these three areas are reported in this book. IJCCI received 236 submissions, from 49 countries, in all continents. After a double blind paper review performed by the Program Committee, only 30 submissions were accepted as full papers and thus selected for oral presentation, leading to a full paper acceptance ratio of 13%. Additional papers were accepted as short papers and posters. A further selection was made after the Conference, based also on the assessment of presentation quality and audience inte...

  3. 7th International Symposium on Intelligent Distributed Computing

    CERN Document Server

    Jung, Jason; Badica, Costin

    2014-01-01

    This book represents the combined peer-reviewed proceedings of the Seventh International Symposium on Intelligent Distributed Computing - IDC-2013, of the Second Workshop on Agents for Clouds - A4C-2013, of the Fifth International Workshop on Multi-Agent Systems Technology and Semantics - MASTS-2013, and of the International Workshop on Intelligent Robots - iR-2013. All the events were held in Prague, Czech Republic during September 4-6, 2013. The 41 contributions published in this book address many topics related to theory and applications of intelligent distributed computing and multi-agent systems, including: agent-based data processing, ambient intelligence, bio-informatics, collaborative systems, cryptography and security, distributed algorithms, grid and cloud computing, information extraction, intelligent robotics, knowledge management, linked data, mobile agents, ontologies, pervasive computing, self-organizing systems, peer-to-peer computing, social networks and trust, and swarm intelligence.  .

  4. Optical Control of Internal Conversion in Pyrazine

    Science.gov (United States)

    Barry, Grant; Singha, Sima; Hu, Zhan; Seideman, Tamar; Gordon, Robert

    2014-03-01

    We apply quantum control schemes previously reserved for atoms and small molecules to more complex polyatomic molecules. Pyrazine was chosen as a model polyatomic molecule for its well-studied conical intersection seam between the S1 and S2 potential energy surfaces (PESs). Using shaped ultraviolet femtosecond laser pulses, we demonstrate optical control of the excited state dynamics of this molecule under collisionless conditions. This was achieved in a pump-probe experiment by employing a genetic algorithm programmed to suppress ionization of the pyrazine molecules at a preselected time. Our findings indicate that the optimized pulses localize the wave packet for times up to 1.5 ps at a location on the coupled S1/S2 PESs where ionization is energetically forbidden. Our approach is general and does not require knowledge of the molecular Hamiltonian. Funding provided by National Science Foundation grant no. CHE-0848198.

  5. Internal Defect Measurement of Scattering Media by Optical Coherence Microscopy

    Institute of Scientific and Technical Information of China (English)

    ZHU Yong-kai; ZHAO Hong; WANG Zhao; WANG Jun-li

    2005-01-01

    Optical coherence microscopy is applied to measure scattering media's internal defect, which based on low coherence interferometry and confocal microscopy. Optical coherence microscopy is more effective in the rejection of out of focus and multiple scattered photons originating further away of the focal plane. With the three-dimension scanning, the internal defect is detected by measuring the thickness of different points on the sample. The axial resolution is 6 μm and lateral resolution is 1.2 μm. This method is possessed of the advantages over the other measurement method of scattering media, such as non-destruction and highresolution.

  6. 22nd International Conference on Soft Computing

    CERN Document Server

    2017-01-01

    This proceeding book contains a collection of selected accepted papers of the Mendel conference held in Brno, Czech Republic in June 2016. The proceedings book contains three chapters which present recent advances in soft computing including intelligent image processing. The Mendel conference was established in 1995 and is named after the scientist and Augustinian priest Gregor J. Mendel who discovered the famous Laws of Heredity. The main aim of the conference is to create a regular possibility for students, academics and researchers to exchange ideas and novel research methods on a yearly basis.

  7. 6th International Conference on Soft Computing for Problem Solving

    CERN Document Server

    Bansal, Jagdish; Das, Kedar; Lal, Arvind; Garg, Harish; Nagar, Atulya; Pant, Millie

    2017-01-01

    This two-volume book gathers the proceedings of the Sixth International Conference on Soft Computing for Problem Solving (SocProS 2016), offering a collection of research papers presented during the conference at Thapar University, Patiala, India. Providing a veritable treasure trove for scientists and researchers working in the field of soft computing, it highlights the latest developments in the broad area of “Computational Intelligence” and explores both theoretical and practical aspects using fuzzy logic, artificial neural networks, evolutionary algorithms, swarm intelligence, soft computing, computational intelligence, etc.

  8. Numerical Computation of Large Amplitude Internal Solitary Waves,

    Science.gov (United States)

    1981-03-20

    provide adequate resolution. All computations were performed on a CDC Cyber 176 computer, and it takes slightly less than one CPU second to obtain a...H. Segur , Lgn Internal Waves in Fluids of Great Depth, Studies in Applied Math., 62 (1980), pp. 249-262. [3] E. Allgower and K. Georg, Simlicial -and

  9. Encoded diffractive optics for full-spectrum computational imaging

    Science.gov (United States)

    Heide, Felix; Fu, Qiang; Peng, Yifan; Heidrich, Wolfgang

    2016-09-01

    Diffractive optical elements can be realized as ultra-thin plates that offer significantly reduced footprint and weight compared to refractive elements. However, such elements introduce severe chromatic aberrations and are not variable, unless used in combination with other elements in a larger, reconfigurable optical system. We introduce numerically optimized encoded phase masks in which different optical parameters such as focus or zoom can be accessed through changes in the mechanical alignment of a ultra-thin stack of two or more masks. Our encoded diffractive designs are combined with a new computational approach for self-calibrating imaging (blind deconvolution) that can restore high-quality images several orders of magnitude faster than the state of the art without pre-calibration of the optical system. This co-design of optics and computation enables tunable, full-spectrum imaging using thin diffractive optics.

  10. Encoded diffractive optics for full-spectrum computational imaging

    KAUST Repository

    Heide, Felix

    2016-09-16

    Diffractive optical elements can be realized as ultra-thin plates that offer significantly reduced footprint and weight compared to refractive elements. However, such elements introduce severe chromatic aberrations and are not variable, unless used in combination with other elements in a larger, reconfigurable optical system. We introduce numerically optimized encoded phase masks in which different optical parameters such as focus or zoom can be accessed through changes in the mechanical alignment of a ultra-thin stack of two or more masks. Our encoded diffractive designs are combined with a new computational approach for self-calibrating imaging (blind deconvolution) that can restore high-quality images several orders of magnitude faster than the state of the art without pre-calibration of the optical system. This co-design of optics and computation enables tunable, full-spectrum imaging using thin diffractive optics.

  11. 2013 International Conference on Computer Engineering and Network

    CERN Document Server

    Zhu, Tingshao

    2014-01-01

    This book aims to examine innovation in the fields of computer engineering and networking. The book covers important emerging topics in computer engineering and networking, and it will help researchers and engineers improve their knowledge of state-of-art in related areas. The book presents papers from The Proceedings of the 2013 International Conference on Computer Engineering and Network (CENet2013) which was held on July 20-21, in Shanghai, China.

  12. 10th International Symposium on Intelligent Distributed Computing

    CERN Document Server

    Seghrouchni, Amal; Beynier, Aurélie; Camacho, David; Herpson, Cédric; Hindriks, Koen; Novais, Paulo

    2017-01-01

    This book presents the combined peer-reviewed proceedings of the tenth International Symposium on Intelligent Distributed Computing (IDC’2016), which was held in Paris, France from October 10th to 12th, 2016. The 23 contributions address a range of topics related to theory and application of intelligent distributed computing, including: Intelligent Distributed Agent-Based Systems, Ambient Intelligence and Social Networks, Computational Sustainability, Intelligent Distributed Knowledge Representation and Processing, Smart Networks, Networked Intelligence and Intelligent Distributed Applications, amongst others.

  13. One-way quantum computing in the optical frequency comb.

    Science.gov (United States)

    Menicucci, Nicolas C; Flammia, Steven T; Pfister, Olivier

    2008-09-26

    One-way quantum computing allows any quantum algorithm to be implemented easily using just measurements. The difficult part is creating the universal resource, a cluster state, on which the measurements are made. We propose a scalable method that uses a single, multimode optical parametric oscillator (OPO). The method is very efficient and generates a continuous-variable cluster state, universal for quantum computation, with quantum information encoded in the quadratures of the optical frequency comb of the OPO.

  14. Engineering multiphoton states for linear optics computation

    CERN Document Server

    Aniello, P; Napolitano, M; Paris, M G A; Aniello, Paolo; Lupo, Cosmo; Napolitano, Mario; Paris, Matteo G.A.

    2006-01-01

    Transformations achievable by linear optical components allow to generate the whole unitary group only when restricted to the one-photon subspace of a multimode Fock space. In this paper, we address the more general problem of encoding quantum information by multiphoton states, and elaborating it via ancillary extensions, linear optical passive devices and photodetection. Our scheme stems in a natural way from the mathematical structures underlying the physics of linear optical passive devices. In particular, we analyze an economical procedure for mapping a fiducial 2-photon 2-mode state into an arbitrary 2-photon 2-mode state using ancillary resources and linear optical passive N-ports assisted by post-selection. We found that adding a single ancilla mode is enough to generate any desired target state. The effect of imperfect photodetection in post-selection is considered and a simple trade-off between success probability and fidelity is derived.

  15. 11th International Conference on Computer and Information Science

    CERN Document Server

    Computer and Information 2012

    2012-01-01

    The series "Studies in Computational Intelligence" (SCI) publishes new developments and advances in the various areas of computational intelligence – quickly and with a high quality. The intent is to cover the theory, applications, and design methods of computational intelligence, as embedded in the fields of engineering, computer science, physics and life science, as well as the methodologies behind them. The series contains monographs, lecture notes and edited volumes in computational intelligence spanning the areas of neural networks, connectionist systems, genetic algorithms, evolutionary computation, artificial intelligence, cellular automata, self-organizing systems, soft computing, fuzzy systems, and hybrid intelligent systems. Critical to both contributors and readers are the short publication time and world-wide distribution - this permits a rapid and broad dissemination of research results.   The purpose of the 11th IEEE/ACIS International Conference on Computer and Information Science (ICIS 2012...

  16. PREFACE: Second International Conference on Optical and Laser Diagnostics

    Science.gov (United States)

    Arcoumanis, C.; Grattan, K. T. V.

    2006-08-01

    The area of optical and laser diagnostics continues to expand and develop, and is now an essential part of many fields in engineering. Indeed it is one of the most interdisciplinary of the topics of today's research, impacting upon areas from fundamental physics to IT and encompassing a wide number of specific fields in engineering today. The proceedings of this, the second International Conference on Optical and Laser Diagnostics (ICOLAD 2005), follows upon the very successful first conference held in 2002, and reflects in its content many of the developments in this area since that time. The aim of a Conference which is an international forum for new ideas and developments in this exciting branch of optical engineering continues, building upon the foundation of research in optical diagnostics and optical sensing for a number of industrial and biomedical application areas at the City University, London. The Conference was structured into a number of sessions, held over three days in London, with the contributed talks led by invited papers from many internationally known and respected experts in their field from the UK, mainland Europe, the United States and Japan. The material covered includes such major themes as laser diagnostics, reciprocating engine-related applications and flow velocity measurement, extending to encompass, for example, biomedical and structural monitoring using advanced optical techniques. The papers draw their authority from the reputations of the authors and the groups and companies internationally that they represent and this volume brings together a valuable cross-section of such world-leading research. The local Organizing Committee would like to acknowledge and thank the industrial sponsors of the Conference and the members of the local and the International Steering Committee for their contribution to the success of this Conference. In particular thanks are due to Ms Claire Pantlin and the Institute of Physics for their work to make

  17. The 6th International Conference on Computer Science and Computational Mathematics (ICCSCM 2017)

    Science.gov (United States)

    2017-09-01

    Retrievals, Data Mining, Web Image Mining, & Applications, Defining Spectrum Rights and Open Spectrum Solutions, E-Comerce, Ubiquitous, RFID, Applications, Fingerprint/Hand/Biometrics Recognitions and Technologies, Foundations of High-performance Computing, IC-card Security, OTP, and Key Management Issues, IDS/Firewall, Anti-Spam mail, Anti-virus issues, Mobile Computing for E-Commerce, Network Security Applications, Neural Networks and Biomedical Simulations, Quality of Services and Communication Protocols, Quantum Computing, Coding, and Error Controls, Satellite and Optical Communication Systems, Theory of Parallel Processing and Distributed Computing, Virtual Visions, 3-D Object Retrievals, & Virtual Simulations, Wireless Access Security, etc. The success of ICCSCM 2017 is reflected in the received papers from authors around the world from several countries which allows a highly multinational and multicultural idea and experience exchange. The accepted papers of ICCSCM 2017 are published in this Book. Please check http://www.iccscm.com for further news. A conference such as ICCSCM 2017 can only become successful using a team effort, so herewith we want to thank the International Technical Committee and the Reviewers for their efforts in the review process as well as their valuable advices. We are thankful to all those who contributed to the success of ICCSCM 2017. The Secretary

  18. New Methods for Design and Computation of Freeform Optics

    Science.gov (United States)

    2015-07-09

    strategy for constructing weak solutions to nonlinear partial differential equations arising in design problems involving freeform optical surfaces[10...working in related areas of fully nonlinear partial differential equations , optics, and computational methods for optimization under extremely large...as a partial differential equation (PDE) of second order with nonstandard boundary conditions. The solution to this PDE problem is a scalar function

  19. 10th International Conference on Genetic and Evolutionary Computing

    CERN Document Server

    Lin, Jerry; Wang, Chia-Hung; Jiang, Xin

    2017-01-01

    This book gathers papers presented at the 10th International Conference on Genetic and Evolutionary Computing (ICGEC 2016). The conference was co-sponsored by Springer, Fujian University of Technology in China, the University of Computer Studies in Yangon, University of Miyazaki in Japan, National Kaohsiung University of Applied Sciences in Taiwan, Taiwan Association for Web Intelligence Consortium, and VSB-Technical University of Ostrava, Czech Republic. The ICGEC 2016, which was held from November 7 to 9, 2016 in Fuzhou City, China, was intended as an international forum for researchers and professionals in all areas of genetic and evolutionary computing.

  20. 2012 International Conference on Teaching and Computational Science (ICTCS 2012)

    CERN Document Server

    Advanced Technology in Teaching

    2013-01-01

    2012 International Conference on Teaching and Computational Science (ICTCS 2012) is held on April 1-2, 2012, Macao.   This volume contains 120 selected papers presented at 2012 International Conference on Teaching and Computational Science (ICTCS 2012), which is to bring together researchers working in many different areas of teaching and computational Science to foster international collaborations and exchange of new ideas.   This volume book can be divided into two sections on the basis of the classification of manuscripts considered. The first section deals with teaching. The second section of this volume consists of computational Science.   We hope that all the papers here published can benefit you in the related researching fields.

  1. Spatiotemporal structures in the internally pumped optical parametric oscillator

    DEFF Research Database (Denmark)

    Lodahl, Peter; Bache, Morten; Saffman, Mark

    2001-01-01

    We analyze pattern formation in doubly resonant second-harmonic generation in the presence of a competing parametric process, also named the internally pumped optical parametric oscillator. Different scenarios are established where either the up- or down-conversion processes dominate the spatiote...... patterns and gray solitons. Estimates of the thresholds for pattern formation under experimentally relevant conditions are given....

  2. 3rd International Conference on High Performance Scientific Computing

    CERN Document Server

    Kostina, Ekaterina; Phu, Hoang; Rannacher, Rolf

    2008-01-01

    This proceedings volume contains a selection of papers presented at the Third International Conference on High Performance Scientific Computing held at the Hanoi Institute of Mathematics, Vietnamese Academy of Science and Technology (VAST), March 6-10, 2006. The conference has been organized by the Hanoi Institute of Mathematics, Interdisciplinary Center for Scientific Computing (IWR), Heidelberg, and its International PhD Program ``Complex Processes: Modeling, Simulation and Optimization'', and Ho Chi Minh City University of Technology. The contributions cover the broad interdisciplinary spectrum of scientific computing and present recent advances in theory, development of methods, and applications in practice. Subjects covered are mathematical modelling, numerical simulation, methods for optimization and control, parallel computing, software development, applications of scientific computing in physics, chemistry, biology and mechanics, environmental and hydrology problems, transport, logistics and site loca...

  3. International Conference on Computers and Advanced Technology in Education

    CERN Document Server

    Advanced Information Technology in Education

    2012-01-01

    The volume includes a set of selected papers extended and revised from the 2011 International Conference on Computers and Advanced Technology in Education. With the development of computers and advanced technology, the human social activities are changing basically. Education, especially the education reforms in different countries, has been experiencing the great help from the computers and advanced technology. Generally speaking, education is a field which needs more information, while the computers, advanced technology and internet are a good information provider. Also, with the aid of the computer and advanced technology, persons can make the education an effective combination. Therefore, computers and advanced technology should be regarded as an important media in the modern education. Volume Advanced Information Technology in Education is to provide a forum for researchers, educators, engineers, and government officials involved in the general areas of computers and advanced technology in education to d...

  4. Distributed quantum computation via optical fibres

    CERN Document Server

    Serafini, A; Bose, S; Serafini, Alessio; Mancini, Stefano; Bose, Sougato

    2005-01-01

    We investigate the possibility of realising effective quantum gates between two atoms in distant cavities coupled by an optical fibre. We show that highly reliable swap and entangling gates are achievable. We exactly study the stability of these gates in presence of imperfections in coupling strengths and interaction times and prove them to be robust. Moreover, we analyse the effect of spontaneous emission and losses and show that such gates are very promising in view of the high level of coherent control currently achievable in optical cavities.

  5. International Conference on Computational Intelligence in Data Mining

    CERN Document Server

    Mohapatra, Durga

    2017-01-01

    The book presents high quality papers presented at the International Conference on Computational Intelligence in Data Mining (ICCIDM 2016) organized by School of Computer Engineering, Kalinga Institute of Industrial Technology (KIIT), Bhubaneswar, Odisha, India during December 10 – 11, 2016. The book disseminates the knowledge about innovative, active research directions in the field of data mining, machine and computational intelligence, along with current issues and applications of related topics. The volume aims to explicate and address the difficulties and challenges that of seamless integration of the two core disciplines of computer science. .

  6. 1st International Conference on Intelligent Computing and Communication

    CERN Document Server

    Satapathy, Suresh; Sanyal, Manas; Bhateja, Vikrant

    2017-01-01

    The book covers a wide range of topics in Computer Science and Information Technology including swarm intelligence, artificial intelligence, evolutionary algorithms, and bio-inspired algorithms. It is a collection of papers presented at the First International Conference on Intelligent Computing and Communication (ICIC2) 2016. The prime areas of the conference are Intelligent Computing, Intelligent Communication, Bio-informatics, Geo-informatics, Algorithm, Graphics and Image Processing, Graph Labeling, Web Security, Privacy and e-Commerce, Computational Geometry, Service Orient Architecture, and Data Engineering.

  7. International MultiConference of Engineers and Computer Scientists 2015

    CERN Document Server

    Ao, Sio-Iong; Huang, Xu; Castillo, Oscar

    2016-01-01

    This volume comprises selected extended papers written by prominent researchers participating in the International MultiConference of Engineers and Computer Scientists 2015, Hong Kong, 18-20 March 2015. The conference served as a platform for discussion of frontier topics in theoretical and applied engineering and computer science, and subjects covered include communications systems, control theory and automation, bioinformatics, artificial intelligence, data mining, engineering mathematics, scientific computing, engineering physics, electrical engineering, and industrial applications. The book describes the state-of-the-art in engineering technologies and computer science and its applications, and will serve as an excellent reference for industrial and academic researchers and graduate students working in these fields.

  8. Demonstration of optical computing logics based on binary decision diagram.

    Science.gov (United States)

    Lin, Shiyun; Ishikawa, Yasuhiko; Wada, Kazumi

    2012-01-16

    Optical circuits are low power consumption and fast speed alternatives for the current information processing based on transistor circuits. However, because of no transistor function available in optics, the architecture for optical computing should be chosen that optics prefers. One of which is Binary Decision Diagram (BDD), where signal is processed by sending an optical signal from the root through a serial of switching nodes to the leaf (terminal). Speed of optical computing is limited by either transmission time of optical signals from the root to the leaf or switching time of a node. We have designed and experimentally demonstrated 1-bit and 2-bit adders based on the BDD architecture. The switching nodes are silicon ring resonators with a modulation depth of 10 dB and the states are changed by the plasma dispersion effect. The quality, Q of the rings designed is 1500, which allows fast transmission of signal, e.g., 1.3 ps calculated by a photon escaping time. A total processing time is thus analyzed to be ~9 ps for a 2-bit adder and would scales linearly with the number of bit. It is two orders of magnitude faster than the conventional CMOS circuitry, ~ns scale of delay. The presented results show the potential of fast speed optical computing circuits.

  9. 5th International Conference on Optics Within Life Sciences

    CERN Document Server

    Papazoglou, Theodore; Kalpouzos, Costas

    2000-01-01

    Following to previous OWLS conferences devoted to widespread applications of optics in life sciences, this 5th OWLS Conference focuses on recent achievements in applying lasers and optics in biomedicine and the preservation of our cultural heritage. Particular attention is paid to laser diagnostics in medicine, interaction of laser radiation with biological tissue, aspects of the preservation of cultural heritage, and the development of new systems for these studies. The contributors to this volume cover international research activities in the following areas: Laser-tissue interactions and tissue optics - photon migration in tissue; Medical sensors - fiber optics; Clinical use of lasers (dermatology, ENT, cardiology, etc.); Laser-based techniques in art conservation (cleaning, diagnostics, analytical applications); Imaging techniques and lasers in archaeology; Laser technologies in contemporary art (holography, marking, etc.); and New laser and opto-electronic systems for biomedical and art-related studies.

  10. PREFACE: XVIII International Youth Scientific School "Coherent Optics and Optical Spectroscopy"

    Science.gov (United States)

    Salakhov, M. Kh; Samartsev, V. V.; Gainutdinov, R. Kh

    2015-05-01

    Kazan Federal University has held the annual International Youth School "Coherent Optics and Optical Spectroscopy" since 1997. The choice of the topic is not accidental. Kazan is the home of photon echo which was predicted at Kazan Physical-Technical Institute in 1963 by Prof. U.G. Kopvil'em and V.R. Nagibarov and observed in Columbia University by N.A. Kurnit, I.D. Abella, and S.R. Hartmann in 1964. Since then, photon echo has become a powerful tool of coherent optical spectroscopy and optical information processing, which have been developed here in Kazan in close collaboration between Kazan Physical-Technical Institute and Kazan Federal University. The main subjects of the XVIII International Youth School are: Nonlinear and coherent optics; Atomic and molecular spectroscopy; Coherent laser spectroscopy; Problems of quantum optics; Quantum theory of radiation; and Nanophotonics and Scanning Probe Microscopy. The unchallenged organizers of that school are Kazan Federal University and Kazan E.K. Zavoisky Physical-Technical Institute. The rector of the School is Professor Myakzyum Salakhov, and the vice-rector is Professor Vitaly Samartsev. The International Youth Scientific School "Coherent Optics and Optical Spectroscopy" follows the global pattern of comprehensive studies of matter properties and their interaction with electromagnetic fields. Since 1997 more than 100 famous scientists from the USA, Germany, Ukraine, Belarus and Russia have given plenary lecture presentations. Here over 1000 young scientists had an opportunity to participate in lively discussions about the latest scientific news. Many young people have submitted interesting reports on photonics, quantum electronics, laser physics, quantum optics, traditional optical and laser spectroscopy, non-linear optics, material science and nanotechnology. Here we are publishing the fullsize papers prepared from the most interesting lectures and reports selected by the Program Committee of the School. The

  11. All-optical reservoir computer based on saturation of absorption.

    Science.gov (United States)

    Dejonckheere, Antoine; Duport, François; Smerieri, Anteo; Fang, Li; Oudar, Jean-Louis; Haelterman, Marc; Massar, Serge

    2014-05-05

    Reservoir computing is a new bio-inspired computation paradigm. It exploits a dynamical system driven by a time-dependent input to carry out computation. For efficient information processing, only a few parameters of the reservoir needs to be tuned, which makes it a promising framework for hardware implementation. Recently, electronic, opto-electronic and all-optical experimental reservoir computers were reported. In those implementations, the nonlinear response of the reservoir is provided by active devices such as optoelectronic modulators or optical amplifiers. By contrast, we propose here the first reservoir computer based on a fully passive nonlinearity, namely the saturable absorption of a semiconductor mirror. Our experimental setup constitutes an important step towards the development of ultrafast low-consumption analog computers.

  12. Optical character recognition systems for different languages with soft computing

    CERN Document Server

    Chaudhuri, Arindam; Badelia, Pratixa; K Ghosh, Soumya

    2017-01-01

    The book offers a comprehensive survey of soft-computing models for optical character recognition systems. The various techniques, including fuzzy and rough sets, artificial neural networks and genetic algorithms, are tested using real texts written in different languages, such as English, French, German, Latin, Hindi and Gujrati, which have been extracted by publicly available datasets. The simulation studies, which are reported in details here, show that soft-computing based modeling of OCR systems performs consistently better than traditional models. Mainly intended as state-of-the-art survey for postgraduates and researchers in pattern recognition, optical character recognition and soft computing, this book will be useful for professionals in computer vision and image processing alike, dealing with different issues related to optical character recognition.

  13. International Conference in Computational Cell Biology: From the Past to the Future

    Science.gov (United States)

    2016-09-12

    International Conference in Computational Cell Biology : from the past to the future The first International Conference on Computational Cell ...their latest research and discussed challenges in computational cell biology research and education. The views, opinions and/or findings contained in...International Conference in Computational Cell Biology : from the past to the future Report Title The first International Conference on Computational Cell

  14. Second International Conference on Advanced Computing, Networking and Informatics

    CERN Document Server

    Mohapatra, Durga; Konar, Amit; Chakraborty, Aruna

    2014-01-01

    Advanced Computing, Networking and Informatics are three distinct and mutually exclusive disciplines of knowledge with no apparent sharing/overlap among them. However, their convergence is observed in many real world applications, including cyber-security, internet banking, healthcare, sensor networks, cognitive radio, pervasive computing amidst many others. This two-volume proceedings explore the combined use of Advanced Computing and Informatics in the next generation wireless networks and security, signal and image processing, ontology and human-computer interfaces (HCI). The two volumes together include 148 scholarly papers, which have been accepted for presentation from over 640 submissions in the second International Conference on Advanced Computing, Networking and Informatics, 2014, held in Kolkata, India during June 24-26, 2014. The first volume includes innovative computing techniques and relevant research results in informatics with selective applications in pattern recognition, signal/image process...

  15. 2nd International Conference on Intelligent Computing and Applications

    CERN Document Server

    Dash, Subhransu; Das, Swagatam; Panigrahi, Bijaya

    2017-01-01

    Second International Conference on Intelligent Computing and Applications was the annual research conference aimed to bring together researchers around the world to exchange research results and address open issues in all aspects of Intelligent Computing and Applications. The main objective of the second edition of the conference for the scientists, scholars, engineers and students from the academia and the industry is to present ongoing research activities and hence to foster research relations between the Universities and the Industry. The theme of the conference unified the picture of contemporary intelligent computing techniques as an integral concept that highlights the trends in computational intelligence and bridges theoretical research concepts with applications. The conference covered vital issues ranging from intelligent computing, soft computing, and communication to machine learning, industrial automation, process technology and robotics. This conference also provided variety of opportunities for ...

  16. 1st International Conference on Communication and Computer Engineering

    CERN Document Server

    Othman, Mohd; Othman, Mohd; Rahim, Yahaya; Pee, Naim

    2015-01-01

    This book covers diverse aspects of advanced computer and communication engineering, focusing specifically on industrial and manufacturing theory and applications of electronics, communications, computing, and information technology. Experts in research, industry, and academia present the latest developments in technology, describe applications involving cutting-edge communication and computer systems, and explore likely future directions. In addition, access is offered to numerous new algorithms that assist in solving computer and communication engineering problems. The book is based on presentations delivered at ICOCOE 2014, the 1st International Conference on Communication and Computer Engineering. It will appeal to a wide range of professionals in the field, including telecommunication engineers, computer engineers and scientists, researchers, academics, and students.

  17. 2nd International Conference on Communication and Computer Engineering

    CERN Document Server

    Othman, Mohd; Othman, Mohd; Rahim, Yahaya; Pee, Naim

    2016-01-01

    This book covers diverse aspects of advanced computer and communication engineering, focusing specifically on industrial and manufacturing theory and applications of electronics, communications, computing and information technology. Experts in research, industry, and academia present the latest developments in technology, describe applications involving cutting-edge communication and computer systems, and explore likely future trends. In addition, a wealth of new algorithms that assist in solving computer and communication engineering problems are presented. The book is based on presentations given at ICOCOE 2015, the 2nd International Conference on Communication and Computer Engineering. It will appeal to a wide range of professionals in the field, including telecommunication engineers, computer engineers and scientists, researchers, academics and students.

  18. 6th International Conference on Design Computing and Cognition

    CERN Document Server

    Hanna, Sean

    2015-01-01

    This book details the state-of-the-art of research and development in design computing and design cognition. It features more than 35 papers that were presented at the Sixth International Conference on Design Computing and Cognition, DCC’14, held at University College, London, UK. Inside, readers will find the work of expert researchers and practitioners that explores both advances in theory and application as well as demonstrates the depth and breadth of design computing and design cognition. This interdisciplinary coverage, which includes material from international research groups, examines design synthesis, design cognition, design creativity, design processes, design theory, design grammars, design support, and design ideation. Overall, the papers provide a bridge between design computing and design cognition. The confluence of these two fields continues to build the foundation for further advances and leads to an increased understanding of design as an activity whose influence continues to spread. ...

  19. 30th International Symposium on Computer and Information Sciences

    CERN Document Server

    Gelenbe, Erol; Gorbil, Gokce; Lent, Ricardo

    2016-01-01

    The 30th Anniversary of the ISCIS (International Symposium on Computer and Information Sciences) series of conferences, started by Professor Erol Gelenbe at Bilkent University, Turkey, in 1986, will be held at Imperial College London on September 22-24, 2015. The preceding two ISCIS conferences were held in Krakow, Poland in 2014, and in Paris, France, in 2013.   The Proceedings of ISCIS 2015 published by Springer brings together rigorously reviewed contributions from leading international experts. It explores new areas of research and technological development in computer science, computer engineering, and information technology, and presents new applications in fast changing fields such as information science, computer science and bioinformatics.   The topics covered include (but are not limited to) advances in networking technologies, software defined networks, distributed systems and the cloud, security in the Internet of Things, sensor systems, and machine learning and large data sets.

  20. PREFACE: Third International Conference on Optical and Laser Diagnostics

    Science.gov (United States)

    Arcoumanis, C.; Grattan, K. T. V.

    2007-09-01

    The International Conference on Optical and Laser Diagnostics (ICOLAD 2007), held at City University in May 2007, was the third meeting in this well established series, following upon the first in 2002 and the second in 2005. During that time the area of optical and laser diagnostics has continued to develop and to expand with both the changes seen in the technology and the availability of new optical components and laser systems. The field remains one of the most interdisciplinary of the topics of today's research, impacting upon areas from fundamental physics to IT and encompassing a number of different areas in engineering today. These proceedings are a record of current practice in this area from a Conference which remains an international forum for new ideas and developments in this exciting branch of optical engineering. It builds upon the foundation of research in the broad field of optical diagnostics in a number of industrial and biomedical application areas at the City University, London. The Conference was structured into a number of sessions reflecting topical developments in engine research, optical sensing and measurement and biomedical engineering held over three days in London, with the contributed talks led by invited papers from many internationally known and respected experts in their field from mainland Europe, the United States and Japan and the UK. The material covered encompasses such major themes as laser diagnostics, reciprocating engine-related applications and flow velocity measurement, extending to include biomedical and structural monitoring using advanced optical techniques. The papers at this Conference continue to draw their authority from the reputations of the authors and the groups and companies internationally that they represent. This volume brings together a valuable cross-section of world-leading research at the time. The local Organizing Committee would like to acknowledge and thank the industrial sponsors of the Conference

  1. 1st International Conference on Internet Computing and Information Communications

    CERN Document Server

    Awasthi, Lalit; Masillamani, M; Sridhar, S

    2014-01-01

    The book presents high quality research papers presented by experts in the International Conference on Internet Computing and Information Communications 2012, organized by ICICIC Global organizing committee (on behalf of The CARD Atlanta, Georgia, CREATE Conferences Inc). The objective of this book is to present the latest work done in the field of Internet computing by researchers and industrial professionals across the globe. A step to reduce the research divide between developed and under developed countries.

  2. Computation of surface roughness using optical correlation

    Indian Academy of Sciences (India)

    A M hamed; M Saudy

    2007-05-01

    The laser speckle photography is used to calculate the average surface roughness from the autocorrelation function of the aluminum diffuse objects. The computed results of surface roughness obtained from the profile shapes of the autocorrelation function of the diffuser show good agreement with the results obtained by the stylus profile meter.

  3. Intelligent Distributed Computing VI : Proceedings of the 6th International Symposium on Intelligent Distributed Computing

    CERN Document Server

    Badica, Costin; Malgeri, Michele; Unland, Rainer

    2013-01-01

    This book represents the combined peer-reviewed proceedings of the Sixth International Symposium on Intelligent Distributed Computing -- IDC~2012, of the International Workshop on Agents for Cloud -- A4C~2012 and of the Fourth International Workshop on Multi-Agent Systems Technology and Semantics -- MASTS~2012. All the events were held in Calabria, Italy during September 24-26, 2012. The 37 contributions published in this book address many topics related to theory and applications of intelligent distributed computing and multi-agent systems, including: adaptive and autonomous distributed systems, agent programming, ambient assisted living systems, business process modeling and verification, cloud computing, coalition formation, decision support systems, distributed optimization and constraint satisfaction, gesture recognition, intelligent energy management in WSNs, intelligent logistics, machine learning, mobile agents, parallel and distributed computational intelligence, parallel evolutionary computing, trus...

  4. Computational Model for Internal Relative Humidity Distributions in Concrete

    Directory of Open Access Journals (Sweden)

    Wondwosen Ali

    2014-01-01

    Full Text Available A computational model is developed for predicting nonuniform internal relative humidity distribution in concrete. Internal relative humidity distribution is known to have a direct effect on the nonuniform drying shrinkage strains. These nonuniform drying shrinkage strains result in the buildup of internal stresses, which may lead to cracking of concrete. This may be particularly true at early ages of concrete since the concrete is relatively weak while the difference in internal relative humidity is probably high. The results obtained from this model can be used by structural and construction engineers to predict critical drying shrinkage stresses induced due to differential internal humidity distribution. The model uses finite elment-finite difference numerical methods. The finite element is used to space discretization while the finite difference is used to obtain transient solutions of the model. The numerical formulations are then programmed in Matlab. The numerical results were compared with experimental results found in the literature and demonstrated very good agreement.

  5. The 9th international conference on computing and information technology

    CERN Document Server

    Unger, Herwig; Boonkrong, Sirapat; IC2IT2013

    2013-01-01

    This volume contains the papers of the 9th International Conference on Computing and Information Technology (IC2IT 2013) held at King Mongkut's University of Technology North Bangkok (KMUTNB), Bangkok, Thailand, on May 9th-10th, 2013. Traditionally, the conference is organized in conjunction with the National Conference on Computing and Information Technology, one of the leading Thai national events in the area of Computer Science and Engineering. The conference as well as this volume is structured into 3 main tracks on Data Networks/Communication, Data Mining/Machine Learning, and Human Interfaces/Image processing.  

  6. International Conference on Frontiers of Intelligent Computing : Theory and Applications

    CERN Document Server

    Udgata, Siba; Biswal, Bhabendra

    2014-01-01

    This volume contains the papers presented at the Second International Conference on Frontiers in Intelligent Computing: Theory and Applications (FICTA-2013) held during 14-16 November 2013 organized by Bhubaneswar Engineering College (BEC), Bhubaneswar, Odisha, India. It contains 63 papers focusing on application of intelligent techniques which includes evolutionary computation techniques like genetic algorithm, particle swarm optimization techniques, teaching-learning based optimization etc  for various engineering applications such as data mining, Fuzzy systems, Machine Intelligence and ANN, Web technologies and Multimedia applications and Intelligent computing and Networking etc.

  7. 1st International Conference on Signal, Networks, Computing, and Systems

    CERN Document Server

    Mohapatra, Durga; Nagar, Atulya; Sahoo, Manmath

    2016-01-01

    The book is a collection of high-quality peer-reviewed research papers presented in the first International Conference on Signal, Networks, Computing, and Systems (ICSNCS 2016) held at Jawaharlal Nehru University, New Delhi, India during February 25–27, 2016. The book is organized in to two volumes and primarily focuses on theory and applications in the broad areas of communication technology, computer science and information security. The book aims to bring together the latest scientific research works of academic scientists, professors, research scholars and students in the areas of signal, networks, computing and systems detailing the practical challenges encountered and the solutions adopted.

  8. International Conference on Frontiers of Intelligent Computing : Theory and Applications

    CERN Document Server

    Udgata, Siba; Biswal, Bhabendra

    2013-01-01

    The volume contains the papers presented at FICTA 2012: International Conference on Frontiers in Intelligent Computing: Theory and Applications held on December 22-23, 2012 in Bhubaneswar engineering College, Bhubaneswar, Odissa, India. It contains 86 papers contributed by authors from the globe. These research papers mainly focused on application of intelligent techniques which includes evolutionary computation techniques like genetic algorithm, particle swarm optimization techniques, teaching-learning based optimization etc  for various engineering applications such as data mining, image processing, cloud computing, networking etc.

  9. Computational wave optics library for C++: CWO++ library

    CERN Document Server

    Shimobaba, Tomoyoshi; Sakurai, Takahiro; Okada, Naohisa; Nishitsuji, Takashi; Takada, Naoki; Shiraki, Atsushi; Masuda, Nobuyuki; Ito, Tomoyoshi

    2011-01-01

    Diffraction calculations, such as the angular spectrum method, and Fresnel diffractions, are used for calculating scalar light propagation. The calculations are used in wide-ranging optics fields: for example, computer generated holograms (CGHs), digital holography, diffractive optical elements, microscopy, image encryption and decryption, three-dimensional analysis for optical devices and so on. However, increasing demands made by large-scale diffraction calculations have rendered the computational power of recent computers insufficient. We have already developed a numerical library for diffraction calculations using a graphic processing unit (GPU), which was named the GWO library. However, this GWO library is not user-friendly, since it is based on C language and was also run only on a GPU. In this paper, we develop a new C++ class library for diffraction and CGH calculations, which is referred as to a CWO++ library, running on a CPU and GPU. We also describe the structure, performance, and usage examples o...

  10. Photodeposited diffractive optical elements of computer generated masks

    Energy Technology Data Exchange (ETDEWEB)

    Mirchin, N. [Electrical and Electronics Engineering Department, Holon Academic Institute of Technology, 52 Golomb Street, Holon 58102 (Israel)]. E-mail: mirchin@hait.ac.il; Peled, A. [Electrical and Electronics Engineering Department, Holon Academic Institute of Technology, 52 Golomb Street, Holon 58102 (Israel); Baal-Zedaka, I. [Electrical and Electronics Engineering Department, Holon Academic Institute of Technology, 52 Golomb Street, Holon 58102 (Israel); Margolin, R. [Electrical and Electronics Engineering Department, Holon Academic Institute of Technology, 52 Golomb Street, Holon 58102 (Israel); Zagon, M. [Electrical and Electronics Engineering Department, Holon Academic Institute of Technology, 52 Golomb Street, Holon 58102 (Israel); Lapsker, I. [Physics Department, Holon Academic Institute of Technology, 52 Golomb Street, Holon 58102 (Israel); Verdyan, A. [Physics Department, Holon Academic Institute of Technology, 52 Golomb Street, Holon 58102 (Israel); Azoulay, J. [Physics Department, Holon Academic Institute of Technology, 52 Golomb Street, Holon 58102 (Israel)

    2005-07-30

    Diffractive optical elements (DOE) were synthesized on plastic substrates using the photodeposition (PD) technique by depositing amorphous selenium (a-Se) films with argon lasers and UV spectra light. The thin films were deposited typically onto polymethylmethacrylate (PMMA) substrates at room temperature. Scanned beam and contact mask modes were employed using computer-designed DOE lenses. Optical and electron micrographs characterize the surface details. The films were typically 200 nm thick.

  11. Photodeposited diffractive optical elements of computer generated masks

    Science.gov (United States)

    Mirchin, N.; Peled, A.; Baal-Zedaka, I.; Margolin, R.; Zagon, M.; Lapsker, I.; Verdyan, A.; Azoulay, J.

    2005-07-01

    Diffractive optical elements (DOE) were synthesized on plastic substrates using the photodeposition (PD) technique by depositing amorphous selenium (a-Se) films with argon lasers and UV spectra light. The thin films were deposited typically onto polymethylmethacrylate (PMMA) substrates at room temperature. Scanned beam and contact mask modes were employed using computer-designed DOE lenses. Optical and electron micrographs characterize the surface details. The films were typically 200 nm thick.

  12. Interplay between internal structure and optical properties of thermosensitive nanogels

    OpenAIRE

    Ledesma-Motolinía, Mónica; Braibanti, Marco; Rojas-Ochoa, Luis F.; Haro-Pérez, Catalina

    2016-01-01

    The structural and optical properties of thermosensitive particles, nanogels, are studied by light scattering and refractometry as a function of temperature. Nanogels are composed of poly- N-Isopropopylacrylamide, a polymer that shrinks at temperatures higher than its lower critical solution temperature, 33 °C. The internal nanogel structure obtained by light scattering is well modeled by assuming a constant radial mass density profile convoluted with a Gaussian function. Moreover, we introdu...

  13. 3rd International Conference on Photonics, Optics and Laser Technology

    CERN Document Server

    Raposo, Maria

    2016-01-01

    The book provides a collection of selected papers presented to the third International Conference on Photonics, Optics and Laser Technology PHOTOPTICS 2015, covering the three main conference scientific areas of “Optics”, “Photonics” and “Lasers”. The selected papers, in two classes full and short, result from a double blind review carried out by the conference program committee members which are highly qualified experts in conference topic areas.

  14. 2nd International Conference on Photonics, Optics and Laser Technology

    CERN Document Server

    Raposo, Maria

    2016-01-01

    This collection of the selected papers presented to the Second International Conference on Photonics, Optics and laser technology PHOTOPTICS 2014 covers the three main conference scientific areas of “Optics”, “Photonics” and “Lasers”. The selected papers, in two classes full and short, result from a double blind review carried out by conference Program Committee members who are highly qualified experts in the conference topic areas.

  15. 2nd International Conference on Computer and Communication Technologies

    CERN Document Server

    Raju, K; Mandal, Jyotsna; Bhateja, Vikrant

    2016-01-01

    The book is about all aspects of computing, communication, general sciences and educational research covered at the Second International Conference on Computer & Communication Technologies held during 24-26 July 2015 at Hyderabad. It hosted by CMR Technical Campus in association with Division – V (Education & Research) CSI, India. After a rigorous review only quality papers are selected and included in this book. The entire book is divided into three volumes. Three volumes cover a variety of topics which include medical imaging, networks, data mining, intelligent computing, software design, image processing, mobile computing, digital signals and speech processing, video surveillance and processing, web mining, wireless sensor networks, circuit analysis, fuzzy systems, antenna and communication systems, biomedical signal processing and applications, cloud computing, embedded systems applications and cyber security and digital forensic. The readers of these volumes will be highly benefited from the te...

  16. 4th International Conference on Computer Engineering and Networks

    CERN Document Server

    2015-01-01

    This book aims to examine innovation in the fields of computer engineering and networking. The book covers important emerging topics in computer engineering and networking, and it will help researchers and engineers improve their knowledge of state-of-art in related areas. The book presents papers from the 4th International Conference on Computer Engineering and Networks (CENet2014) held July 19-20, 2014 in Shanghai, China.  ·       Covers emerging topics for computer engineering and networking ·       Discusses how to improve productivity by using the latest advanced technologies ·       Examines innovation in the fields of computer engineering and networking  

  17. 5th International Conference on High Performance Scientific Computing

    CERN Document Server

    Hoang, Xuan; Rannacher, Rolf; Schlöder, Johannes

    2014-01-01

    This proceedings volume gathers a selection of papers presented at the Fifth International Conference on High Performance Scientific Computing, which took place in Hanoi on March 5-9, 2012. The conference was organized by the Institute of Mathematics of the Vietnam Academy of Science and Technology (VAST), the Interdisciplinary Center for Scientific Computing (IWR) of Heidelberg University, Ho Chi Minh City University of Technology, and the Vietnam Institute for Advanced Study in Mathematics. The contributions cover the broad interdisciplinary spectrum of scientific computing and present recent advances in theory, development of methods, and practical applications. Subjects covered include mathematical modeling; numerical simulation; methods for optimization and control; parallel computing; software development; and applications of scientific computing in physics, mechanics and biomechanics, material science, hydrology, chemistry, biology, biotechnology, medicine, sports, psychology, transport, logistics, com...

  18. 3rd International Conference on Advanced Computing, Networking and Informatics

    CERN Document Server

    Mohapatra, Durga; Chaki, Nabendu

    2016-01-01

    Advanced Computing, Networking and Informatics are three distinct and mutually exclusive disciplines of knowledge with no apparent sharing/overlap among them. However, their convergence is observed in many real world applications, including cyber-security, internet banking, healthcare, sensor networks, cognitive radio, pervasive computing amidst many others. This two volume proceedings explore the combined use of Advanced Computing and Informatics in the next generation wireless networks and security, signal and image processing, ontology and human-computer interfaces (HCI). The two volumes together include 132 scholarly articles, which have been accepted for presentation from over 550 submissions in the Third International Conference on Advanced Computing, Networking and Informatics, 2015, held in Bhubaneswar, India during June 23–25, 2015.

  19. 1st International Conference on Computational and Experimental Biomedical Sciences

    CERN Document Server

    Jorge, RM

    2015-01-01

    This book contains the full papers presented at ICCEBS 2013 – the 1st International Conference on Computational and Experimental Biomedical Sciences, which was organized in Azores, in October 2013. The included papers present and discuss new trends in those fields, using several methods and techniques, including active shape models, constitutive models, isogeometric elements, genetic algorithms, level sets, material models, neural networks, optimization, and the finite element method, in order to address more efficiently different and timely applications involving biofluids, computer simulation, computational biomechanics, image based diagnosis, image processing and analysis, image segmentation, image registration, scaffolds, simulation, and surgical planning. The main audience for this book consists of researchers, Ph.D students, and graduate students with multidisciplinary interests related to the areas of artificial intelligence, bioengineering, biology, biomechanics, computational fluid dynamics, comput...

  20. 4th International Conference on Quantitative Logic and Soft Computing

    CERN Document Server

    Chen, Shui-Li; Wang, San-Min; Li, Yong-Ming

    2017-01-01

    This book is the proceedings of the Fourth International Conference on Quantitative Logic and Soft Computing (QLSC2016) held 14-17, October, 2016 in Zhejiang Sci-Tech University, Hangzhou, China. It includes 61 papers, of which 5 are plenary talks( 3 abstracts and 2 full length talks). QLSC2016 was the fourth in a series of conferences on Quantitative Logic and Soft Computing. This conference was a major symposium for scientists, engineers and practitioners to present their updated results, ideas, developments and applications in all areas of quantitative logic and soft computing. The book aims to strengthen relations between industry research laboratories and universities in fields such as quantitative logic and soft computing worldwide as follows: (1) Quantitative Logic and Uncertainty Logic; (2) Automata and Quantification of Software; (3) Fuzzy Connectives and Fuzzy Reasoning; (4) Fuzzy Logical Algebras; (5) Artificial Intelligence and Soft Computing; (6) Fuzzy Sets Theory and Applications.

  1. Student Perspectives of Computer Literacy Education in an International Environment

    Science.gov (United States)

    Vasilache, Simona

    2016-01-01

    Computer literacy education is an integral part of early university education (it often starts at the high school level). A wide variety of university course structures and teaching styles exist and, at the same time, the knowledge levels of incoming students are varied. This issue is even more pressing in an international environment. This paper…

  2. Proceedings Second International Worshop on Computational Models for Cell Processes

    CERN Document Server

    Back, Ralph-Johan; de Vink, Erik

    2009-01-01

    The second international workshop on Computational Models for Cell Processes (ComProc 2009) took place on November 3, 2009 at the Eindhoven University of Technology, in conjunction with Formal Methods 2009. The workshop was jointly organized with the EC-MOAN project. This volume contains the final versions of all contributions accepted for presentation at the workshop.

  3. Computed Optical Interferometric Imaging: Methods, Achievements, and Challenges.

    Science.gov (United States)

    South, Fredrick A; Liu, Yuan-Zhi; Carney, P Scott; Boppart, Stephen A

    2016-01-01

    Three-dimensional high-resolution optical imaging systems are generally restricted by the trade-off between resolution and depth-of-field as well as imperfections in the imaging system or sample. Computed optical interferometric imaging is able to overcome these longstanding limitations using methods such as interferometric synthetic aperture microscopy (ISAM) and computational adaptive optics (CAO) which manipulate the complex interferometric data. These techniques correct for limited depth-of-field and optical aberrations without the need for additional hardware. This paper aims to outline these computational methods, making them readily available to the research community. Achievements of the techniques will be highlighted, along with past and present challenges in implementing the techniques. Challenges such as phase instability and determination of the appropriate aberration correction have been largely overcome so that imaging of living tissues using ISAM and CAO is now possible. Computed imaging in optics is becoming a mature technology poised to make a significant impact in medicine and biology.

  4. 10th International Symposium on Computer Science in Sports

    CERN Document Server

    Soltoggio, Andrea; Dawson, Christian; Meng, Qinggang; Pain, Matthew

    2016-01-01

    This book presents the main scientific results of the 10th International Symposium of Computer Science in Sport (IACSS/ISCSS 2015), sponsored by the International Association of Computer Science in Sport in collaboration with the International Society of Sport Psychology (ISSP), which took place between September 9-11, 2015 at Loughborough, UK. This proceedings aims to build a link between computer science and sport, and reports on results from applying computer science techniques to address a wide number of problems in sport and exercise sciences. It provides a good platform and opportunity for researchers in both computer science and sport to understand and discuss ideas and promote cross-disciplinary research. The strictly reviewed and carefully revised papers cover the following topics: Modelling and Analysis, Artificial Intelligence in Sport, Virtual Reality in Sport,  Neural Cognitive Training,  IT Systems for Sport, Sensing Technologies and Image Processing.

  5. Computational imaging using lightweight diffractive-refractive optics

    KAUST Repository

    Peng, Yifan

    2015-11-23

    Diffractive optical elements (DOE) show great promise for imaging optics that are thinner and more lightweight than conventional refractive lenses while preserving their light efficiency. Unfortunately, severe spectral dispersion currently limits the use of DOEs in consumer-level lens design. In this article, we jointly design lightweight diffractive-refractive optics and post-processing algorithms to enable imaging under white light illumination. Using the Fresnel lens as a general platform, we show three phase-plate designs, including a super-thin stacked plate design, a diffractive-refractive-hybrid lens, and a phase coded-aperture lens. Combined with cross-channel deconvolution algorithm, both spherical and chromatic aberrations are corrected. Experimental results indicate that using our computational imaging approach, diffractive-refractive optics is an alternative candidate to build light efficient and thin optics for white light imaging.

  6. Computational imaging using lightweight diffractive-refractive optics.

    Science.gov (United States)

    Peng, Yifan; Fu, Qiang; Amata, Hadi; Su, Shuochen; Heide, Felix; Heidrich, Wolfgang

    2015-11-30

    Diffractive optical elements (DOE) show great promise for imaging optics that are thinner and more lightweight than conventional refractive lenses while preserving their light efficiency. Unfortunately, severe spectral dispersion currently limits the use of DOEs in consumer-level lens design. In this article, we jointly design lightweight diffractive-refractive optics and post-processing algorithms to enable imaging under white light illumination. Using the Fresnel lens as a general platform, we show three phase-plate designs, including a super-thin stacked plate design, a diffractive-refractive-hybrid lens, and a phase coded-aperture lens. Combined with cross-channel deconvolution algorithm, both spherical and chromatic aberrations are corrected. Experimental results indicate that using our computational imaging approach, diffractive-refractive optics is an alternative candidate to build light efficient and thin optics for white light imaging.

  7. 9th International Symposium on Intelligent Distributed Computing

    CERN Document Server

    Camacho, David; Analide, Cesar; Seghrouchni, Amal; Badica, Costin

    2016-01-01

    This book represents the combined peer-reviewed proceedings of the ninth International Symposium on Intelligent Distributed Computing – IDC’2015, of the Workshop on Cyber Security and Resilience of Large-Scale Systems – WSRL’2015, and of the International Workshop on Future Internet and Smart Networks – FI&SN’2015. All the events were held in Guimarães, Portugal during October 7th-9th, 2015. The 46 contributions published in this book address many topics related to theory and applications of intelligent distributed computing, including: Intelligent Distributed Agent-Based Systems, Ambient Intelligence and Social Networks, Computational Sustainability, Intelligent Distributed Knowledge Representation and Processing, Smart Networks, Networked Intelligence and Intelligent Distributed Applications, amongst others.

  8. Computational methods to compute wavefront error due to aero-optic effects

    Science.gov (United States)

    Genberg, Victor; Michels, Gregory; Doyle, Keith; Bury, Mark; Sebastian, Thomas

    2013-09-01

    Aero-optic effects can have deleterious effects on high performance airborne optical sensors that must view through turbulent flow fields created by the aerodynamic effects of windows and domes. Evaluating aero-optic effects early in the program during the design stages allows mitigation strategies and optical system design trades to be performed to optimize system performance. This necessitates a computationally efficient means to evaluate the impact of aero-optic effects such that the resulting dynamic pointing errors and wavefront distortions due to the spatially and temporally varying flow field can be minimized or corrected. To this end, an aero-optic analysis capability was developed within the commercial software SigFit that couples CFD results with optical design tools. SigFit reads the CFD generated density profile using the CGNS file format. OPD maps are then created by converting the three-dimensional density field into an index of refraction field and then integrating along specified paths to compute OPD errors across the optical field. The OPD maps may be evaluated directly against system requirements or imported into commercial optical design software including Zemax® and Code V® for a more detailed assessment of the impact on optical performance from which design trades may be performed.

  9. 1st International Conference on Fiber-Optic Rotation Sensors

    CERN Document Server

    Arditty, Hervé

    1982-01-01

    Currently there is considerable interest in the application of optical meth­ ods for the measurement of absolute rotation. Active approaches, so-called ring laser gyros, have been under serious development for at least 15 years. More recently, passive approaches using ring resonators or multi turn fiber interferometers have also demonstrated much pro~ise. The only previous conference devoted exclusively to optical rotation sensors, held in 1978 in San Diego, California, was organized by the Society of Photo-optical Instru­ mentation Engineers(S.P.I.E.J. Although the main emphasis at that conference was on ring laser gyros, a number of papers were also included that described the early development of fiber gyroscopes. Since then the field of fiber optic rotation sensors has grown so rapidly that a conference devoted primarily to this subject was needed. The First International Conference on Fiber-Optic Rotation Sensors was held at the Massachusetts Institute of Technology, Cambridge, Massachusetts, Nove~­ b...

  10. International standards for optical circuit board fabrication, assembly and measurement

    Science.gov (United States)

    Pitwon, Richard; Immonen, Marika; Wang, Kai; Itoh, Hideo; Shioda, Tsuyoshi; Wu, Jinhua; Zhu, Long Xiu; Yan, Hui Juan; Worrall, Alex

    2016-03-01

    The commercial adoption of electro-optical printed circuit board (EOCB) technology will be accelerated by the development of industrial and conformity standards for high volume fabrication, connector assembly and waveguide measurement. In this paper, we introduce international standardisation activities surrounding EOCBs and report on industrial processes developed for the high volume fabrication of complex EOCBs with embedded multimode polymer waveguides including a first connector standard for polymer waveguide termination. We focus on solving a serious historic problem with the measurement of optical waveguide systems, namely the lack of harmonised measurement conditions for optical waveguides, which to this day gives rise to strong inconsistencies in the results of measurements by different parties on the same waveguide. We report on the development of a standard to ensure repeatable measurement of optical waveguides, whereby we demonstrate how the application of a measurement identification system and proposed reference measurement conditions can bring variation in measurement results to within 5%, thereby serving as the basis for a formal reliable optical waveguide measurement methodology.

  11. 7th International Conference on Design Computing and Cognition

    CERN Document Server

    2017-01-01

    This book gathers the peer-reviewed and revised versions of papers from the Seventh International Conference on Design Computing and Cognition (DCC'16), held at Northwestern University, Evanston (Chicago), USA, from 27–29 June 2016. The material presented here reflects cutting-edge design research with a focus on artificial intelligence, cognitive science and computational theories. The papers are grouped under the following nine headings, describing advances in theory and applications alike and demonstrating the depth and breadth of design computing and design cognition: Design Creativity; Design Cognition - Design Approaches; Design Support; Design Grammars; Design Cognition - Design Behaviors; Design Processes; Design Synthesis; Design Activity and Design Knowledge. The book will be of particular interest to researchers, developers and users of advanced computation in design across all disciplines, and to all readers who need to gain a better understanding of designing.

  12. 4th International Conference on Applied Computing and Information Technology

    CERN Document Server

    2017-01-01

    This edited book presents scientific results of the 4th International Conference on Applied Computing and Information Technology (ACIT 2016) which was held on December 12–14, 2016 in Las Vegas, USA. The aim of this conference was to bring together researchers and scientists, businessmen and entrepreneurs, teachers, engineers, computer users, and students to discuss the numerous fields of computer science and to share their experiences and exchange new ideas and information in a meaningful way. The aim of this conference was also to bring out the research results about all aspects (theory, applications and tools) of computer and information science, and to discuss the practical challenges encountered along the way and the solutions adopted to solve them. The conference organizers selected the best papers from those papers accepted for presentation at the conference. The papers were chosen based on review scores submitted by members of the Program Committee, and underwent further rigorous rounds of review. Th...

  13. First International Conference on Intelligent Computing and Applications

    CERN Document Server

    Kar, Rajib; Das, Swagatam; Panigrahi, Bijaya

    2015-01-01

    The idea of the 1st International Conference on Intelligent Computing and Applications (ICICA 2014) is to bring the Research Engineers, Scientists, Industrialists, Scholars and Students together from in and around the globe to present the on-going research activities and hence to encourage research interactions between universities and industries. The conference provides opportunities for the delegates to exchange new ideas, applications and experiences, to establish research relations and to find global partners for future collaboration. The proceedings covers latest progresses in the cutting-edge research on various research areas of Image, Language Processing, Computer Vision and Pattern Recognition, Machine Learning, Data Mining and Computational Life Sciences, Management of Data including Big Data and Analytics, Distributed and Mobile Systems including Grid and Cloud infrastructure, Information Security and Privacy, VLSI, Electronic Circuits, Power Systems, Antenna, Computational fluid dynamics & Hea...

  14. 2nd International Conference on Computational Intelligence in Data Mining

    CERN Document Server

    Mohapatra, Durga

    2016-01-01

    The book is a collection of high-quality peer-reviewed research papers presented in the Second International Conference on Computational Intelligence in Data Mining (ICCIDM 2015) held at Bhubaneswar, Odisha, India during 5 – 6 December 2015. The two-volume Proceedings address the difficulties and challenges for the seamless integration of two core disciplines of computer science, i.e., computational intelligence and data mining. The book addresses different methods and techniques of integration for enhancing the overall goal of data mining. The book helps to disseminate the knowledge about some innovative, active research directions in the field of data mining, machine and computational intelligence, along with some current issues and applications of related topics.

  15. Intelligent Distributed Computing V : Proceedings of the 5th International Symposium on Intelligent Distributed Computing

    CERN Document Server

    Nieuwenhuis, Kees; Pavlin, Gregor; Warnier, Martijn; Badica, Costin

    2012-01-01

    This book represents the combined peer-reviewed proceedings of the Fifth International Symposium on Intelligent Distributed Computing -- IDC 2011 and of the Third International Workshop on Multi-Agent Systems Technology and Semantics -- MASTS 2011. Both events were held in Delft, The Netherlands during October 5-7, 2011. The 33 contributions published in this book address many topics related to theory and applications of intelligent distributed computing and multi-agent systems, including: adaptive and autonomous distributed systems, agent programming, ambient assisted living systems, business process modeling and verification, cloud computing, coalition formation, decision support systems, distributed optimization and constraint satisfaction, gesture recognition, intelligent energy management in WSNs, intelligent logistics, machine learning, mobile agents, parallel and distributed computational intelligence, parallel evolutionary computing, trust metrics and security, scheduling in distributed heterogenous c...

  16. Compensation of corneal oblique astigmatism by internal optics: a theoretical analysis.

    Science.gov (United States)

    Liu, Tao; Thibos, Larry N

    2017-05-01

    Oblique astigmatism is a prominent optical aberration of peripheral vision caused by oblique incidence of rays striking the refracting surfaces of the cornea and crystalline lens. We inquired whether oblique astigmatism from these two sources should be expected, theoretically, to have the same or opposite signs across the visual field at various states of accommodation. Oblique astigmatism was computed across the central visual field for a rotationally-symmetric schematic-eye using optical design software. Accommodative state was varied by altering the apical radius of curvature and separation of the biconvex lens's two aspheric surfaces in a manner consistent with published biometry. Oblique astigmatism was evaluated separately for the whole eye, the cornea, and the isolated lens over a wide range of surface curvatures and asphericity values associated with the accommodating lens. We also computed internal oblique astigmatism by subtracting corneal oblique astigmatism from whole-eye oblique astigmatism. A visual field map of oblique astigmatism for the cornea in the Navarro model follows the classic, textbook description of radially-oriented axes everywhere in the field. Despite large changes in surface properties during accommodation, intrinsic astigmatism of the isolated human lens for collimated light is also radially oriented and nearly independent of accommodation both in theory and in real eyes. However, the magnitude of ocular oblique astigmatism is smaller than that of the cornea alone, indicating partial compensation by the internal optics. This implies internal oblique astigmatism (which includes wavefront propagation from the posterior surface of the cornea to the anterior surface of the lens and intrinsic lens astigmatism) must have tangentially-oriented axes. This non-classical pattern of tangential axes for internal astigmatism was traced to the influence of corneal power on the angles of incidence of rays striking the internal lens. Partial

  17. Computers and the design of ion beam optical systems

    Science.gov (United States)

    White, Nicholas R.

    Advances in microcomputers have made it possible to maintain a library of advanced ion optical programs which can be used on inexpensive computer hardware, which are suitable for the design of a variety of ion beam systems including ion implanters, giving excellent results. This paper describes in outline the steps typically involved in designing a complete ion beam system for materials modification applications. Two computer programs are described which, although based largely on algorithms which have been in use for many years, make possible detailed beam optical calculations using microcomputers, specifically the IBM PC. OPTICIAN is an interactive first-order program for tracing beam envelopes through complex optical systems. SORCERY is a versatile program for solving Laplace's and Poisson's equations by finite difference methods using successive over-relaxation. Ion and electron trajectories can be traced through these potential fields, and plots of beam emittance obtained.

  18. Advanced Computer Science on Internal Ballistics of Solid Rocket Motors

    Science.gov (United States)

    Shimada, Toru; Kato, Kazushige; Sekino, Nobuhiro; Tsuboi, Nobuyuki; Seike, Yoshio; Fukunaga, Mihoko; Daimon, Yu; Hasegawa, Hiroshi; Asakawa, Hiroya

    In this paper, described is the development of a numerical simulation system, what we call “Advanced Computer Science on SRM Internal Ballistics (ACSSIB)”, for the purpose of improvement of performance and reliability of solid rocket motors (SRM). The ACSSIB system is consisting of a casting simulation code of solid propellant slurry, correlation database of local burning-rate of cured propellant in terms of local slurry flow characteristics, and a numerical code for the internal ballistics of SRM, as well as relevant hardware. This paper describes mainly the objectives, the contents of this R&D, and the output of the fiscal year of 2008.

  19. Distributed Computing and Artificial Intelligence, 12th International Conference

    CERN Document Server

    Malluhi, Qutaibah; Gonzalez, Sara; Bocewicz, Grzegorz; Bucciarelli, Edgardo; Giulioni, Gianfranco; Iqba, Farkhund

    2015-01-01

    The 12th International Symposium on Distributed Computing and Artificial Intelligence 2015 (DCAI 2015) is a forum to present applications of innovative techniques for studying and solving complex problems. The exchange of ideas between scientists and technicians from both the academic and industrial sector is essential to facilitate the development of systems that can meet the ever-increasing demands of today’s society. The present edition brings together past experience, current work and promising future trends associated with distributed computing, artificial intelligence and their application in order to provide efficient solutions to real problems. This symposium is organized by the Osaka Institute of Technology, Qatar University and the University of Salamanca.

  20. International MultiConference of Engineers and Computer Scientists 2016

    CERN Document Server

    Kim, Haeng; Huang, Xu; Castillo, Oscar

    2017-01-01

    This volume contains selected revised and extended research articles written by prominent researchers who participated in the International MultiConference of Engineers and Computer Scientists 2016, held in Hong Kong, 16-18 March 2016. Topics covered include engineering physics, communications systems, control theory, automation, engineering mathematics, scientific computing, electrical engineering, and industrial applications. The book showcases the tremendous advances in engineering technologies and applications, and also serves as an excellent reference work for researchers and graduate students working on engineering technologies, physical sciences and their applications.

  1. International Conference on Computer Science and Information Technology

    CERN Document Server

    Li, Xiaolong

    2014-01-01

    The main objective of CSAIT 2013 is to provide a forum for researchers, educators, engineers and government officials involved in the general areas of Computational Sciences and Information Technology to disseminate their latest research results and exchange views on the future research directions of these fields. A medium like this provides an opportunity to the academicians and industrial professionals to exchange and integrate practice of computer science, application of the academic ideas, improve the academic depth. The in-depth discussions on the subject provide an international communication platform for educational technology and scientific research for the world's universities, engineering field experts, professionals and business executives.

  2. 9th International Conference on Advanced Computing & Communication Technologies

    CERN Document Server

    Mandal, Jyotsna; Auluck, Nitin; Nagarajaram, H

    2016-01-01

    This book highlights a collection of high-quality peer-reviewed research papers presented at the Ninth International Conference on Advanced Computing & Communication Technologies (ICACCT-2015) held at Asia Pacific Institute of Information Technology, Panipat, India during 27–29 November 2015. The book discusses a wide variety of industrial, engineering and scientific applications of the emerging techniques. Researchers from academia and industry present their original work and exchange ideas, information, techniques and applications in the field of Advanced Computing and Communication Technology.

  3. 4th International Conference on Soft Computing for Problem Solving

    CERN Document Server

    Deep, Kusum; Pant, Millie; Bansal, Jagdish; Nagar, Atulya

    2015-01-01

    This two volume book is based on the research papers presented at the 4th International Conference on Soft Computing for Problem Solving (SocProS 2014) and covers a variety of topics, including mathematical modelling, image processing, optimization methods, swarm intelligence, evolutionary algorithms, fuzzy logic, neural networks, forecasting, medical and healthcare, data mining, etc. Mainly the emphasis is on Soft Computing and its applications in diverse areas. The prime objective of this book is to familiarize the reader with the latest scientific developments in various fields of Science, Engineering and Technology and is directed to the researchers and scientists engaged in various real-world applications of ‘Soft Computing’.

  4. Computational methods for internal flows with emphasis on turbomachinery

    Science.gov (United States)

    Mcnally, W. D.; Sockol, P. M.

    1981-01-01

    Current computational methods for analyzing flows in turbomachinery and other related internal propulsion components are presented. The methods are divided into two classes. The inviscid methods deal specifically with turbomachinery applications. Viscous methods, deal with generalized duct flows as well as flows in turbomachinery passages. Inviscid methods are categorized into the potential, stream function, and Euler aproaches. Viscous methods are treated in terms of parabolic, partially parabolic, and elliptic procedures. Various grids used in association with these procedures are also discussed.

  5. Computational Modeling of Ultrafast Pulse Propagation in Nonlinear Optical Materials

    Science.gov (United States)

    Goorjian, Peter M.; Agrawal, Govind P.; Kwak, Dochan (Technical Monitor)

    1996-01-01

    There is an emerging technology of photonic (or optoelectronic) integrated circuits (PICs or OEICs). In PICs, optical and electronic components are grown together on the same chip. rib build such devices and subsystems, one needs to model the entire chip. Accurate computer modeling of electromagnetic wave propagation in semiconductors is necessary for the successful development of PICs. More specifically, these computer codes would enable the modeling of such devices, including their subsystems, such as semiconductor lasers and semiconductor amplifiers in which there is femtosecond pulse propagation. Here, the computer simulations are made by solving the full vector, nonlinear, Maxwell's equations, coupled with the semiconductor Bloch equations, without any approximations. The carrier is retained in the description of the optical pulse, (i.e. the envelope approximation is not made in the Maxwell's equations), and the rotating wave approximation is not made in the Bloch equations. These coupled equations are solved to simulate the propagation of femtosecond optical pulses in semiconductor materials. The simulations describe the dynamics of the optical pulses, as well as the interband and intraband.

  6. Computational wave optics library for C++: CWO++ library

    Science.gov (United States)

    Shimobaba, Tomoyoshi; Weng, Jiantong; Sakurai, Takahiro; Okada, Naohisa; Nishitsuji, Takashi; Takada, Naoki; Shiraki, Atsushi; Masuda, Nobuyuki; Ito, Tomoyoshi

    2012-05-01

    Diffraction calculations, such as the angular spectrum method and Fresnel diffractions, are used for calculating scalar light propagation. The calculations are used in wide-ranging optics fields: for example, Computer Generated Holograms (CGHs), digital holography, diffractive optical elements, microscopy, image encryption and decryption, three-dimensional analysis for optical devices and so on. However, increasing demands made by large-scale diffraction calculations have rendered the computational power of recent computers insufficient. We have already developed a numerical library for diffraction calculations using a Graphic Processing Unit (GPU), which was named the GWO library. However, this GWO library is not user-friendly, since it is based on C language and was also run only on a GPU. In this paper, we develop a new C++ class library for diffraction and CGH calculations, which is referred to as a CWO++ library, running on a CPU and GPU. We also describe the structure, performance, and usage examples of the CWO++ library. Program summaryProgram title: CWO++ Catalogue identifier: AELL_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AELL_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 109 809 No. of bytes in distributed program, including test data, etc.: 4 181 911 Distribution format: tar.gz Programming language: C++ Computer: General computers and general computers with NVIDIA GPUs Operating system: Windows XP, Vista, 7 Has the code been vectorized or parallelized?: Yes. 1 core processor used in CPU and many cores in GPU. RAM: 256 M bytes Classification: 18 External routines: CImg, FFTW Nature of problem: The CWO++ library provides diffraction calculations which are useful for Computer Generated Holograms (CGHs), digital holography, diffractive

  7. Physics Computing '92: Proceedings of the 4th International Conference

    Science.gov (United States)

    de Groot, Robert A.; Nadrchal, Jaroslav

    1993-04-01

    The Table of Contents for the book is as follows: * Preface * INVITED PAPERS * Ab Initio Theoretical Approaches to the Structural, Electronic and Vibrational Properties of Small Clusters and Fullerenes: The State of the Art * Neural Multigrid Methods for Gauge Theories and Other Disordered Systems * Multicanonical Monte Carlo Simulations * On the Use of the Symbolic Language Maple in Physics and Chemistry: Several Examples * Nonequilibrium Phase Transitions in Catalysis and Population Models * Computer Algebra, Symmetry Analysis and Integrability of Nonlinear Evolution Equations * The Path-Integral Quantum Simulation of Hydrogen in Metals * Digital Optical Computing: A New Approach of Systolic Arrays Based on Coherence Modulation of Light and Integrated Optics Technology * Molecular Dynamics Simulations of Granular Materials * Numerical Implementation of a K.A.M. Algorithm * Quasi-Monte Carlo, Quasi-Random Numbers and Quasi-Error Estimates * What Can We Learn from QMC Simulations * Physics of Fluctuating Membranes * Plato, Apollonius, and Klein: Playing with Spheres * Steady States in Nonequilibrium Lattice Systems * CONVODE: A REDUCE Package for Differential Equations * Chaos in Coupled Rotators * Symplectic Numerical Methods for Hamiltonian Problems * Computer Simulations of Surfactant Self Assembly * High-dimensional and Very Large Cellular Automata for Immunological Shape Space * A Review of the Lattice Boltzmann Method * Electronic Structure of Solids in the Self-interaction Corrected Local-spin-density Approximation * Dedicated Computers for Lattice Gauge Theory Simulations * Physics Education: A Survey of Problems and Possible Solutions * Parallel Computing and Electronic-Structure Theory * High Precision Simulation Techniques for Lattice Field Theory * CONTRIBUTED PAPERS * Case Study of Microscale Hydrodynamics Using Molecular Dynamics and Lattice Gas Methods * Computer Modelling of the Structural and Electronic Properties of the Supported Metal Catalysis

  8. 5th International Conference on Computational Collective Intelligence

    CERN Document Server

    Trawinski, Bogdan; Nguyen, Ngoc

    2014-01-01

    The book consists of 19 extended and revised chapters based on original works presented during a poster session organized within the 5th International Conference on Computational Collective Intelligence that was held between 11 and 13 of September 2013 in Craiova, Romania. The book is divided into three parts. The first part is titled “Agents and Multi-Agent Systems” and consists of 8 chapters that concentrate on many problems related to agent and multi-agent systems, including: formal models, agent autonomy, emergent properties, agent programming, agent-based simulation and planning. The second part of the book is titled “Intelligent Computational Methods” and consists of 6 chapters. The authors present applications of various intelligent computational methods like neural networks, mathematical optimization and multistage decision processes in areas like cooperation, character recognition, wireless networks, transport, and metal structures. The third part of the book is titled “Language and Knowled...

  9. 13thInternational Conference on Computer and Information Science

    CERN Document Server

    Software Engineering, Artificial Intelligence, Networking and Parallel/Distributed Computing 2012

    2013-01-01

    The purpose of the 13th  International Conference on Computer and Information Science (SNPD 2012) held on August 8-10, 2012 in Kyoto, Japan was to bring together researchers and scientists, businessmen and entrepreneurs, teachers and students to discuss the numerous fields of computer science, and to share ideas and information in a meaningful way.  Our conference officers selected the best 17 papers from those papers accepted for presentation at the conference in order to publish them in this volume.  The papers were chosen based on review scores submitted by members of the program committee, and underwent further rounds of rigorous review.   The  conference organizers selected 17 outstanding papers from SNPD 2012, all of which you will find in this volume of Springer’s Studies in Computational Intelligence.

  10. Distributed computing and artificial intelligence : 10th International Conference

    CERN Document Server

    Neves, José; Rodriguez, Juan; Santana, Juan; Gonzalez, Sara

    2013-01-01

    The International Symposium on Distributed Computing and Artificial Intelligence 2013 (DCAI 2013) is a forum in which applications of innovative techniques for solving complex problems are presented. Artificial intelligence is changing our society. Its application in distributed environments, such as the internet, electronic commerce, environment monitoring, mobile communications, wireless devices, distributed computing, to mention only a few, is continuously increasing, becoming an element of high added value with social and economic potential, in industry, quality of life, and research. This conference is a stimulating and productive forum where the scientific community can work towards future cooperation in Distributed Computing and Artificial Intelligence areas. These technologies are changing constantly as a result of the large research and technical effort being undertaken in both universities and businesses. The exchange of ideas between scientists and technicians from both the academic and industry se...

  11. 10th International Conference on Scientific Computing in Electrical Engineering

    CERN Document Server

    Clemens, Markus; Günther, Michael; Maten, E

    2016-01-01

    This book is a collection of selected papers presented at the 10th International Conference on Scientific Computing in Electrical Engineering (SCEE), held in Wuppertal, Germany in 2014. The book is divided into five parts, reflecting the main directions of SCEE 2014: 1. Device Modeling, Electric Circuits and Simulation, 2. Computational Electromagnetics, 3. Coupled Problems, 4. Model Order Reduction, and 5. Uncertainty Quantification. Each part starts with a general introduction followed by the actual papers. The aim of the SCEE 2014 conference was to bring together scientists from academia and industry, mathematicians, electrical engineers, computer scientists, and physicists, with the goal of fostering intensive discussions on industrially relevant mathematical problems, with an emphasis on the modeling and numerical simulation of electronic circuits and devices, electromagnetic fields, and coupled problems. The methodological focus was on model order reduction and uncertainty quantification.

  12. The First International Conference on Soft Computing and Data Mining

    CERN Document Server

    Ghazali, Rozaida; Deris, Mustafa

    2014-01-01

    This book constitutes the refereed proceedings of the First International Conference on Soft Computing and Data Mining, SCDM 2014, held in Universiti Tun Hussein Onn Malaysia, in June 16th-18th, 2014. The 65 revised full papers presented in this book were carefully reviewed and selected from 145 submissions, and organized into two main topical sections; Data Mining and Soft Computing. The goal of this book is to provide both theoretical concepts and, especially, practical techniques on these exciting fields of soft computing and data mining, ready to be applied in real-world applications. The exchanges of views pertaining future research directions to be taken in this field and the resultant dissemination of the latest research findings makes this work of immense value to all those having an interest in the topics covered.    

  13. 10th International Conference on Computing and Information Technology

    CERN Document Server

    Unger, Herwig; Meesad, Phayung

    2014-01-01

    Computer and Information Technology (CIT) are now involved in governmental, industrial, and business domains more than ever. Thus, it is important for CIT personnel to continue academic research to improve technology and its adoption to modern applications. The up-to-date research and technologies must be distributed to researchers and CIT community continuously to aid future development. The 10th International Conference on Computing and Information Technology (IC 2 IT2014) organized by King Mongkut's University of Technology North Bangkok (KMUTNB) and partners provides an exchange of the state of the art and future developments in the two key areas of this process: Computer Networking and Data Mining. Behind the background of the foundation of ASEAN, it becomes clear that efficient languages, business principles and communication methods need to be adapted, unified and especially optimized to gain a maximum benefit to the users and customers of future IT systems.

  14. 9th International Conference on Genetic and Evolutionary Computing

    CERN Document Server

    Lin, Jerry; Pan, Jeng-Shyang; Tin, Pyke; Yokota, Mitsuhiro; Genetic and Evolutionary Computing

    2016-01-01

    This volume of Advances in Intelligent Systems and Computing contains accepted papers presented at ICGEC 2015, the 9th International Conference on Genetic and Evolutionary Computing. The conference this year was technically co-sponsored by Ministry of Science and Technology, Myanmar, University of Computer Studies, Yangon, University of Miyazaki in Japan, Kaohsiung University of Applied Science in Taiwan, Fujian University of Technology in China and VSB-Technical University of Ostrava. ICGEC 2015 is held from 26-28, August, 2015 in Yangon, Myanmar. Yangon, the most multiethnic and cosmopolitan city in Myanmar, is the main gateway to the country. Despite being the commercial capital of Myanmar, Yangon is a city engulfed by its rich history and culture, an integration of ancient traditions and spiritual heritage. The stunning SHWEDAGON Pagoda is the center piece of Yangon city, which itself is famous for the best British colonial era architecture. Of particular interest in many shops of Bogyoke Aung San Market,...

  15. 9th International conference on distributed computing and artificial intelligence

    CERN Document Server

    Santana, Juan; González, Sara; Molina, Jose; Bernardos, Ana; Rodríguez, Juan; DCAI 2012; International Symposium on Distributed Computing and Artificial Intelligence 2012

    2012-01-01

    The International Symposium on Distributed Computing and Artificial Intelligence 2012 (DCAI 2012) is a stimulating and productive forum where the scientific community can work towards future cooperation in Distributed Computing and Artificial Intelligence areas. This conference is a forum in which  applications of innovative techniques for solving complex problems will be presented. Artificial intelligence is changing our society. Its application in distributed environments, such as the internet, electronic commerce, environment monitoring, mobile communications, wireless devices, distributed computing, to mention only a few, is continuously increasing, becoming an element of high added value with social and economic potential, in industry, quality of life, and research. These technologies are changing constantly as a result of the large research and technical effort being undertaken in both universities and businesses. The exchange of ideas between scientists and technicians from both the academic and indus...

  16. Control mechanism of double-rotator-structure ternary optical computer

    Science.gov (United States)

    Kai, SONG; Liping, YAN

    2017-03-01

    Double-rotator-structure ternary optical processor (DRSTOP) has two characteristics, namely, giant data-bits parallel computing and reconfigurable processor, which can handle thousands of data bits in parallel, and can run much faster than computers and other optical computer systems so far. In order to put DRSTOP into practical application, this paper established a series of methods, namely, task classification method, data-bits allocation method, control information generation method, control information formatting and sending method, and decoded results obtaining method and so on. These methods form the control mechanism of DRSTOP. This control mechanism makes DRSTOP become an automated computing platform. Compared with the traditional calculation tools, DRSTOP computing platform can ease the contradiction between high energy consumption and big data computing due to greatly reducing the cost of communications and I/O. Finally, the paper designed a set of experiments for DRSTOP control mechanism to verify its feasibility and correctness. Experimental results showed that the control mechanism is correct, feasible and efficient.

  17. Research of the grid computing system applied in optical simulation

    Science.gov (United States)

    Jin, Wei-wei; Wang, Yu-dong; Liu, Qiangsheng; Cen, Zhao-feng; Li, Xiao-tong; Lin, Yi-qun

    2008-03-01

    A grid computing in the field of optics is presented in this paper. Firstly, the basic principles and research background of grid computing are outlined in this paper, along with the overview of its applications and the development status quo. The paper also discusses several typical tasks scheduling algorithms. Secondly, it focuses on describing a task scheduling of grid computing applied in optical computation. The paper gives details about the task scheduling system, including the task partition, granularity selection and tasks allocation, especially the structure of the system. In addition, some details of communication on grid computing are also illustrated. In this system, the "makespan" and "load balancing" are comprehensively considered. Finally, we build a grid model to test the task scheduling strategy, and the results are analyzed in detail. Compared to one isolated computer, a grid comprised of one server and four processors can shorten the "makespan" to 1/4. At the same time, the experimental results of the simulation also illustrate that the proposed scheduling system is able to balance loads of all processors. In short, the system performs scheduling well in the grid environment.

  18. Repeat-until-success linear optics distributed quantum computing.

    Science.gov (United States)

    Lim, Yuan Liang; Beige, Almut; Kwek, Leong Chuan

    2005-07-15

    We demonstrate the possibility to perform distributed quantum computing using only single-photon sources (atom-cavity-like systems), linear optics, and photon detectors. The qubits are encoded in stable ground states of the sources. To implement a universal two-qubit gate, two photons should be generated simultaneously and pass through a linear optics network, where a measurement is performed on them. Gate operations can be repeated until a success is heralded without destroying the qubits at any stage of the operation. In contrast with other schemes, this does not require explicit qubit-qubit interactions, a priori entangled ancillas, nor the feeding of photons into photon sources.

  19. Note: Computer controlled rotation mount for large diameter optics

    CERN Document Server

    Rakonjac, Ana; Deb, Amita B; Kjærgaard, Niels

    2012-01-01

    We describe the construction of a motorized optical rotation mount with a 40 mm clear aperture. The device is used to remotely control the power of large diameter laser beams for a magneto-optical trap (MOT). A piezo-electric ultrasonic motor on a printed circuit board (PCB) provides rotation with a precision better than 0.03 deg and allows for a very compact design. The rotation unit is controlled from a computer via serial communication, making integration into most software control platforms straightforward.

  20. 1st International Conference on Intelligent Computing, Communication and Devices

    CERN Document Server

    Patnaik, Srikanta; Ichalkaranje, Nikhil

    2015-01-01

    In the history of mankind, three revolutions which impact the human life are the tool-making revolution, agricultural revolution and industrial revolution. They have transformed not only the economy and civilization but the overall development of the society. Probably, intelligence revolution is the next revolution, which the society will perceive in the next 10 years. ICCD-2014 covers all dimensions of intelligent sciences, i.e. Intelligent Computing, Intelligent Communication and Intelligent Devices. This volume covers contributions from Intelligent Communication which are from the areas such as Communications and Wireless Ad Hoc & Sensor Networks, Speech & Natural Language Processing, including Signal, Image and Video Processing and Mobile broadband and Optical networks, which are the key to the ground-breaking inventions to intelligent communication technologies. Secondly, Intelligent Device is any type of equipment, instrument, or machine that has its own computing capability. Contributions from ...

  1. Quantum Computation Using Optically Coupled Quantum Dot Arrays

    Science.gov (United States)

    Pradhan, Prabhakar; Anantram, M. P.; Wang, K. L.; Roychowhury, V. P.; Saini, Subhash (Technical Monitor)

    1998-01-01

    A solid state model for quantum computation has potential advantages in terms of the ease of fabrication, characterization, and integration. The fundamental requirements for a quantum computer involve the realization of basic processing units (qubits), and a scheme for controlled switching and coupling among the qubits, which enables one to perform controlled operations on qubits. We propose a model for quantum computation based on optically coupled quantum dot arrays, which is computationally similar to the atomic model proposed by Cirac and Zoller. In this model, individual qubits are comprised of two coupled quantum dots, and an array of these basic units is placed in an optical cavity. Switching among the states of the individual units is done by controlled laser pulses via near field interaction using the NSOM technology. Controlled rotations involving two or more qubits are performed via common cavity mode photon. We have calculated critical times, including the spontaneous emission and switching times, and show that they are comparable to the best times projected for other proposed models of quantum computation. We have also shown the feasibility of accessing individual quantum dots using the NSOM technology by calculating the photon density at the tip, and estimating the power necessary to perform the basic controlled operations. We are currently in the process of estimating the decoherence times for this system; however, we have formulated initial arguments which seem to indicate that the decoherence times will be comparable, if not longer, than many other proposed models.

  2. ULTRASOUND AND COMPUTED TOMOGRAPHIC DIAGNOSIS OF OPTIC NERVE TUMORS

    Directory of Open Access Journals (Sweden)

    S. V. Saakyan

    2012-01-01

    Full Text Available A comprehensive examination was made in 93 patients, including 18 children, with tumors of the optic nerve (ON. Duplex ultrasound scanning was performed in 39 patients, of them there were 11 patients with ON gliomas and 28 with ON meningiomas. The specific computed tomographic and echographic signs of ON glioma and meningiomas were detected. The studies have shown that duplex ultrasound scanning and structural computed tomography of orbital sockets are highly informative complementary imaging procedures for ON tumors, which permits one to make their correct diagnosis, to specify surgical volume, and to plan adequate treatment.

  3. The 2004 Latsis Symposium: Quantum optics for Communication and Computing

    CERN Multimedia

    2004-01-01

    1-3 March 2004 Ecole Polytechnique Fédérale de Lausanne Auditoire SG1 The field of Quantum Optics covers topics that extend from basic physical concepts, regarding the quantum description of light, matter, and light-matter interaction, to the applications of these concepts in future information and communication technologies. This field is of primary importance for science and society for two reasons. Firstly, it brings a deeper physical understanding of the fundamental aspects of modern quantum physics. Secondly, it offers perspectives for the invention and implementation of new devices and systems in the fields of communications, information management and computing. The themes that will be addressed in the Latsis Symposium on Quantum Optics are quantum communications, quantum computation, and quantum photonic devices. The objective of the symposium is to give an overview of this fascinating and rapidly evolving field. The different talks will establish links between new fundamental c...

  4. The 2004 Latsis Symposium: Quantum optics for Communication and Computing

    CERN Multimedia

    2004-01-01

    1-3 March 2004 Ecole Polytechnique Fédérale de Lausanne Auditoire SG1 The field of Quantum Optics covers topics that extend from basic physical concepts, regarding the quantum description of light, matter, and light-matter interaction, to the applications of these concepts in future information and communication technologies. This field is of primary importance for science and society for two reasons. Firstly, it brings a deeper physical understanding of the fundamental aspects of modern quantum physics. Secondly, it offers perspectives for the invention and implementation of new devices and systems in the fields of communications, information management and computing. The themes that will be addressed in the Latsis Symposium on Quantum Optics are quantum communications, quantum computation, and quantum photonic devices. The objective of the symposium is to give an overview of this fascinating and rapidly evolving field. The different talks will establish links between new fundamental ...

  5. The 2004 Latsis Symposium: Quantum optics for Communication and Computing

    CERN Multimedia

    2004-01-01

    1-3 March 2004 Ecole Polytechnique Fédérale de Lausanne Auditoire SG1 The field of Quantum Optics covers topics that extend from basic physical concepts, regarding the quantum description of light, matter, and light-matter interaction, to the applications of these concepts in future information and communication technologies. This field is of primary importance for science and society for two reasons. Firstly, it brings a deeper physical understanding of the fundamental aspects of modern quantum physics. Secondly, it offers perspectives for the invention and implementation of new devices and systems in the fields of communications, information management and computing. The themes that will be addressed in the Latsis Symposium on Quantum Optics are quantum communications, quantum computation, and quantum photonic devices. The objective of the symposium is to give an overview of this fascinating and rapidly evolving field. The different talks will establish links between new fundamental...

  6. Computational Humor 2012 : extended abstacts of the (3rd international) Workshop on computational Humor

    NARCIS (Netherlands)

    Nijholt, Antinus; Unknown, [Unknown

    2012-01-01

    Like its predecessors in 1996 (University of Twente, the Netherlands) and 2002 (ITC-irst, Trento, Italy), this Third International Workshop on Computational Humor (IWCH 2012) focusses on the possibility to find algorithms that allow understanding and generation of humor. There is the general aim of

  7. Fourier optics through the looking glass of digital computers

    Science.gov (United States)

    Yaroslavsky, Leonid P.

    2011-10-01

    Optical transforms are represented in computers by their discrete versions. In particular, Fourier optics is represented through Discrete Fourier Transform (DFT) and Discrete Cosine Transform (DCT). Being discrete representation of the optical Fourier transform, these transforms feature a number of peculiarities that cast a new light on such fundamental properties of the Fourier Transform as sampling theorem and the uncertainty principle. In this paper, we formulate the Discrete Sampling Theorem and the discrete uncertainty principle, demonstrate that discrete signals can be both bandlimited in DFT or DCT domains and have strictly limited support in signal domain and present examples of such "bandlimited/ space-limited" signals that remain to be so for whatever large of their samples.

  8. 8th International Conference on Genetic and Evolutionary Computing

    CERN Document Server

    Yang, Chin-Yu; Lin, Chun-Wei; Pan, Jeng-Shyang; Snasel, Vaclav; Abraham, Ajith

    2015-01-01

    This volume of Advances in Intelligent Systems and Computing contains accepted papers presented at ICGEC 2014, the 8th International Conference on Genetic and Evolutionary Computing. The conference this year was technically co-sponsored by Nanchang Institute of Technology in China, Kaohsiung University of Applied Science in Taiwan, and VSB-Technical University of Ostrava. ICGEC 2014 is held from 18-20 October 2014 in Nanchang, China. Nanchang is one of is the capital of Jiangxi Province in southeastern China, located in the north-central portion of the province. As it is bounded on the west by the Jiuling Mountains, and on the east by Poyang Lake, it is famous for its scenery, rich history and cultural sites. Because of its central location relative to the Yangtze and Pearl River Delta regions, it is a major railroad hub in Southern China. The conference is intended as an international forum for the researchers and professionals in all areas of genetic and evolutionary computing.

  9. 7th International Conference on Genetic and Evolutionary Computing

    CERN Document Server

    Krömer, Pavel; Snášel, Václav

    2014-01-01

    Genetic and Evolutionary Computing This volume of Advances in Intelligent Systems and Computing contains accepted papers presented at ICGEC 2013, the 7th International Conference on Genetic and Evolutionary Computing. The conference this year was technically co-sponsored by The Waseda University in Japan, Kaohsiung University of Applied Science in Taiwan, and VSB-Technical University of Ostrava. ICGEC 2013 was held in Prague, Czech Republic. Prague is one of the most beautiful cities in the world whose magical atmosphere has been shaped over ten centuries. Places of the greatest tourist interest are on the Royal Route running from the Powder Tower through Celetna Street to Old Town Square, then across Charles Bridge through the Lesser Town up to the Hradcany Castle. One should not miss the Jewish Town, and the National Gallery with its fine collection of Czech Gothic art, collection of old European art, and a beautiful collection of French art. The conference was intended as an international forum for the res...

  10. Realization of Shor's algorithm on an optical quantum computer

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ A research team led by Prof. PAN Jianwei with the University of Science and Technology of China (USTC), CAS has been successful in performing Shor's algorithm, a quantum algorithm for factorization, in an optical quantum computer. The feat is also independently made by another team led by Andrew White from the University of Queensland in Brisbane, Australia. Both results were published in the 19 December, 2007 issue of Physics Review Newsletters.

  11. Determination of Horizontal Motion through Optical Flow Computations

    Institute of Scientific and Technical Information of China (English)

    俞志和; FrankM.Caimi

    1997-01-01

    For intelligent/autonomous subsea vehicles,reliable short-range horizontal positioning is difficult to achieve,particularly over flat bottom topography.A potential solution proposed in this paper utilized a passive optical sensing method to estimate the vehicle displacement using the bottom surface texture.The suggested optical flow method does not require any feature correspondences in images and it is robust in allowing brightness changes between image frames.Fundamentally,this method is similar to correlation methods attempting to match images and compute the motion disparity.However,in correlation methods,searching a neighbor region blindly for best match is lengthy.Main contributions of this paper come from the analysis showing that optical flow computation based on the general model cannot avoid errors except for null motion although the sign of optical flow keeps correct,and from the development of an iterative shifting method based on the error characteristics to accurately determine motions.Advantages of the proposed method are verified by real image experiments.

  12. 13th International Conference on Distributed Computing and Artificial Intelligence

    CERN Document Server

    Silvestri, Marcello; González, Sara

    2016-01-01

    The special session Decision Economics (DECON) 2016 is a scientific forum by which to share ideas, projects, researches results, models and experiences associated with the complexity of behavioral decision processes aiming at explaining socio-economic phenomena. DECON 2016 held in the University of Seville, Spain, as part of the 13th International Conference on Distributed Computing and Artificial Intelligence (DCAI) 2016. In the tradition of Herbert A. Simon’s interdisciplinary legacy, this book dedicates itself to the interdisciplinary study of decision-making in the recognition that relevant decision-making takes place in a range of critical subject areas and research fields, including economics, finance, information systems, small and international business, management, operations, and production. Decision-making issues are of crucial importance in economics. Not surprisingly, the study of decision-making has received a growing empirical research efforts in the applied economic literature over the last ...

  13. Computer simulations for internal dosimetry using voxel models.

    Science.gov (United States)

    Kinase, Sakae; Mohammadi, Akram; Takahashi, Masa; Saito, Kimiaki; Zankl, Maria; Kramer, Richard

    2011-07-01

    In the Japan Atomic Energy Agency, several studies have been conducted on the use of voxel models for internal dosimetry. Absorbed fractions (AFs) and S values have been evaluated for preclinical assessments of radiopharmaceuticals using human voxel models and a mouse voxel model. Computational calibration of in vivo measurement system has been also made using Japanese and Caucasian voxel models. In addition, for radiation protection of the environment, AFs have been evaluated using a frog voxel model. Each study was performed by using Monte Carlo simulations. Consequently, it was concluded that these data of Monte Carlo simulations and voxel models could adequately reproduce measurement results. Voxel models were found to be a significant tool for internal dosimetry since the models are anatomically realistic. This fact indicates that several studies on correction of the in vivo measurement efficiency for the variability of human subjects and interspecies scaling of organ doses will succeed.

  14. Internal computational fluid mechanics on supercomputers for aerospace propulsion systems

    Science.gov (United States)

    Andersen, Bernhard H.; Benson, Thomas J.

    1987-01-01

    The accurate calculation of three-dimensional internal flowfields for application towards aerospace propulsion systems requires computational resources available only on supercomputers. A survey is presented of three-dimensional calculations of hypersonic, transonic, and subsonic internal flowfields conducted at the Lewis Research Center. A steady state Parabolized Navier-Stokes (PNS) solution of flow in a Mach 5.0, mixed compression inlet, a Navier-Stokes solution of flow in the vicinity of a terminal shock, and a PNS solution of flow in a diffusing S-bend with vortex generators are presented and discussed. All of these calculations were performed on either the NAS Cray-2 or the Lewis Research Center Cray XMP.

  15. Third International Conference on Soft Computing for Problem Solving

    CERN Document Server

    Deep, Kusum; Nagar, Atulya; Bansal, Jagdish

    2014-01-01

    The present book is based on the research papers presented in the 3rd International Conference on Soft Computing for Problem Solving (SocProS 2013), held as a part of the golden jubilee celebrations of the Saharanpur Campus of IIT Roorkee, at the Noida Campus of Indian Institute of Technology Roorkee, India. This book is divided into two volumes and covers a variety of topics including mathematical modelling, image processing, optimization, swarm intelligence, evolutionary algorithms, fuzzy logic, neural networks, forecasting, medical and health care, data mining etc. Particular emphasis is laid on soft computing and its application to diverse fields. The prime objective of the book is to familiarize the reader with the latest scientific developments that are taking place in various fields and the latest sophisticated problem solving tools that are being developed to deal with the complex and intricate problems, which are otherwise difficult to solve by the usual and traditional methods. The book is directed ...

  16. 5th International Conference on Soft Computing for Problem Solving

    CERN Document Server

    Deep, Kusum; Bansal, Jagdish; Nagar, Atulya; Das, Kedar

    2016-01-01

    This two volume book is based on the research papers presented at the 5th International Conference on Soft Computing for Problem Solving (SocProS 2015) and covers a variety of topics, including mathematical modelling, image processing, optimization methods, swarm intelligence, evolutionary algorithms, fuzzy logic, neural networks, forecasting, medical and health care, data mining, etc. Mainly the emphasis is on Soft Computing and its applications in diverse areas. The prime objective of this book is to familiarize the reader with the latest scientific developments in various fields of Science, Engineering and Technology and is directed to the researchers and scientists engaged in various real-world applications of ‘Soft Computing’.

  17. Second International Conference on Soft Computing for Problem Solving

    CERN Document Server

    Nagar, Atulya; Deep, Kusum; Pant, Millie; Bansal, Jagdish; Ray, Kanad; Gupta, Umesh

    2014-01-01

    The present book is based on the research papers presented in the International Conference on Soft Computing for Problem Solving (SocProS 2012), held at JK Lakshmipat University, Jaipur, India. This book provides the latest developments in the area of soft computing and covers a variety of topics, including mathematical modeling, image processing, optimization, swarm intelligence, evolutionary algorithms, fuzzy logic, neural networks, forecasting, data mining, etc. The objective of the book is to familiarize the reader with the latest scientific developments that are taking place in various fields and the latest sophisticated problem solving tools that are being developed to deal with the complex and intricate problems that are otherwise difficult to solve by the usual and traditional methods. The book is directed to the researchers and scientists engaged in various fields of Science and Technology.

  18. 11th International Conference on Distributed Computing and Artificial Intelligence

    CERN Document Server

    Bersini, Hugues; Corchado, Juan; Rodríguez, Sara; Pawlewski, Paweł; Bucciarelli, Edgardo

    2014-01-01

    The 11th International Symposium on Distributed Computing and Artificial Intelligence 2014 (DCAI 2014) is a forum to present applications of innovative techniques for studying and solving complex problems. The exchange of ideas between scientists and technicians from both the academic and industrial sector is essential to facilitate the development of systems that can meet the ever-increasing demands of today’s society. The present edition brings together past experience, current work and promising future trends associated with distributed computing, artificial intelligence and their application in order to provide efficient solutions to real problems. This year’s technical program presents both high quality and diversity, with contributions in well-established and evolving areas of research (Algeria, Brazil, China, Croatia, Czech Republic, Denmark, France, Germany, Ireland, Italy, Japan, Malaysia, Mexico, Poland, Portugal, Republic of Korea, Spain, Taiwan, Tunisia, Ukraine, United Kingdom), representing ...

  19. 1st International Conference on Computer Vision and Image Processing

    CERN Document Server

    Kumar, Sanjeev; Roy, Partha; Sen, Debashis

    2017-01-01

    This edited volume contains technical contributions in the field of computer vision and image processing presented at the First International Conference on Computer Vision and Image Processing (CVIP 2016). The contributions are thematically divided based on their relation to operations at the lower, middle and higher levels of vision systems, and their applications. The technical contributions in the areas of sensors, acquisition, visualization and enhancement are classified as related to low-level operations. They discuss various modern topics – reconfigurable image system architecture, Scheimpflug camera calibration, real-time autofocusing, climate visualization, tone mapping, super-resolution and image resizing. The technical contributions in the areas of segmentation and retrieval are classified as related to mid-level operations. They discuss some state-of-the-art techniques – non-rigid image registration, iterative image partitioning, egocentric object detection and video shot boundary detection. Th...

  20. Development of a computational methodology for internal dose calculations

    CERN Document Server

    Yoriyaz, H

    2000-01-01

    A new approach for calculating internal dose estimates was developed through the use of a more realistic computational model of the human body and a more precise tool for the radiation transport simulation. The present technique shows the capability to build a patient-specific phantom with tomography data (a voxel-based phantom) for the simulation of radiation transport and energy deposition using Monte Carlo methods such as in the MCNP-4B code. In order to utilize the segmented human anatomy as a computational model for the simulation of radiation transport, an interface program, SCMS, was developed to build the geometric configurations for the phantom through the use of tomographic images. This procedure allows to calculate not only average dose values but also spatial distribution of dose in regions of interest. With the present methodology absorbed fractions for photons and electrons in various organs of the Zubal segmented phantom were calculated and compared to those reported for the mathematical phanto...

  1. Optical design and characterization of an advanced computational imaging system

    Science.gov (United States)

    Shepard, R. Hamilton; Fernandez-Cull, Christy; Raskar, Ramesh; Shi, Boxin; Barsi, Christopher; Zhao, Hang

    2014-09-01

    We describe an advanced computational imaging system with an optical architecture that enables simultaneous and dynamic pupil-plane and image-plane coding accommodating several task-specific applications. We assess the optical requirement trades associated with custom and commercial-off-the-shelf (COTS) optics and converge on the development of two low-cost and robust COTS testbeds. The first is a coded-aperture programmable pixel imager employing a digital micromirror device (DMD) for image plane per-pixel oversampling and spatial super-resolution experiments. The second is a simultaneous pupil-encoded and time-encoded imager employing a DMD for pupil apodization or a deformable mirror for wavefront coding experiments. These two testbeds are built to leverage two MIT Lincoln Laboratory focal plane arrays - an orthogonal transfer CCD with non-uniform pixel sampling and on-chip dithering and a digital readout integrated circuit (DROIC) with advanced on-chip per-pixel processing capabilities. This paper discusses the derivation of optical component requirements, optical design metrics, and performance analyses for the two testbeds built.

  2. 12th International Conference on Computing and Information Technology

    CERN Document Server

    Boonkrong, Sirapat; Unger, Herwig

    2016-01-01

    This proceedings book presents recent research work and results in the area of communication and information technologies. The chapters of this book contain the main, well-selected and reviewed contributions of scientists who met at the 12th International Conference on Computing and Information Technology (IC2IT) held during 7th - 8th July 2016 in Khon Kaen, Thailand The book is divided into three parts: “User Centric Data Mining and Text Processing”, “Data Mining Algoritms and their Applications” and “Optimization of Complex Networks”.

  3. International MultiConference of Engineers and Computer Scientists 2014

    CERN Document Server

    Ao, Sio-Iong; Huang, Xu; Castillo, Oscar

    2015-01-01

    This volume contains revised and extended research articles written by prominent researchers who participated in the international conference on Advances in Engineering Technologies, which was held in Hong Kong, 12-14 March, 2014. Topics covered include engineering physics, engineering mathematics, scientific computing, control theory,  artificial intelligence, electrical engineering, communications systems, and industrial applications. The book offers the state of art of tremendous advances in engineering technologies and physical science and applications, and also serves as an excellent reference work for researchers and graduate students working with/on engineering technologies and physical science and applications.

  4. 11th International Conference on Computing and Information Technology

    CERN Document Server

    Meesad, Phayung; Boonkrong, Sirapat

    2015-01-01

    This book presents recent research work and results in the area of communication and information technologies. The book includes the main results of the 11th International Conference on Computing and Information Technology (IC2IT) held during July 2nd-3rd, 2015 in Bangkok, Thailand. The book is divided into the two main parts Data Mining and Machine Learning as well as Data Network and Communications. New algorithms and methods of data mining asr discussed as well as innovative applications and state-of-the-art technologies on data mining, machine learning and data networking.

  5. International MultiConference of Engineers and Computer Scientists 2013

    CERN Document Server

    Ao, Sio-Iong; Huang, Xu; Castillo, Oscar

    2014-01-01

    This volume contains revised and extended research articles written by prominent researchers participating in the international conference on Advances in Engineering Technologies and Physical Science was held in Hong Kong, 13-15 March, 2013. Topics covered include engineering physics, engineering mathematics, scientific computing, control theory, automation, artificial intelligence, electrical engineering, and industrial applications. The book offers the state of art of tremendous advances in engineering technologies and physical science and applications, and also serves as an excellent reference work for researchers and graduate students working with/on engineering technologies and physical science and applications.

  6. Preparing for Life in a Digital Age: The IEA International Computer and Information Literacy Study International Report

    National Research Council Canada - National Science Library

    Fraillon, Julian; Ainley, John; Schulz, Wolfram; Friedman, Tim; Gebhardt, Eveline

    2014-01-01

    ... this regard? The IEA International Computer and Information Literacy Study (ICILS) responded to this question by studying the extent to which young people have developed computer and information literacy (CIL...

  7. Quantum information processing in nanostructures Quantum optics; Quantum computing

    CERN Document Server

    Reina-Estupinan, J H

    2002-01-01

    Since information has been regarded os a physical entity, the field of quantum information theory has blossomed. This brings novel applications, such as quantum computation. This field has attracted the attention of numerous researchers with backgrounds ranging from computer science, mathematics and engineering, to the physical sciences. Thus, we now have an interdisciplinary field where great efforts are being made in order to build devices that should allow for the processing of information at a quantum level, and also in the understanding of the complex structure of some physical processes at a more basic level. This thesis is devoted to the theoretical study of structures at the nanometer-scale, 'nanostructures', through physical processes that mainly involve the solid-state and quantum optics, in order to propose reliable schemes for the processing of quantum information. Initially, the main results of quantum information theory and quantum computation are briefly reviewed. Next, the state-of-the-art of ...

  8. International Scientific Optical Network (ISON) in Latin America

    Science.gov (United States)

    Zalles Barrera, Rodolfo; Molotov, Igor; Voropaev, Victor; Elenin, Leonid; Grebetskaya, Olga; Condori, Roberto; Mendoza, Daniel; Kokina, Tatiana

    2015-10-01

    International Scientific Optical Network (ISON) is one of largest observing networks specializing in space objects. The main goals of ISON are the investigation of space debris, studying near Earth asteroids (NEA) and observing gamma-ray-bursts (GRB) afterglows. ISON is continuously growing and currently has 35 observation facilities in 15 countries, with 80 telescopes of different apertures (from 12.5 cm to 2.6 m)(see Fig. 1). 8.4 millions of measurements in 1.26 millions of tracks for about 4000 space debris objects were collected by ISON in 2014 and used for analysis. Currently 3 observatories collaborate with ISON in the Western Hemisphere: Tarija in Bolivia, Cosala in Mexico and Mayhill in USA.

  9. Absolute Position Total Internal Reflection Microscopy with an Optical Tweezer

    CERN Document Server

    Liu, Lulu; Rodriguez, Alejandro W; Capasso, Federico

    2014-01-01

    A non-invasive, in-situ calibration method for Total Internal Reflection Microscopy (TIRM) based on optical tweezing is presented which greatly expands the capabilities of this technique. We show that by making only simple modifications to the basic TIRM sensing setup and procedure, a probe particle's absolute position relative to a dielectric interface may be known with better than 10 nm precision out to a distance greater than 1 $\\mu$m from the surface. This represents an approximate 10x improvement in error and 3x improvement in measurement range over conventional TIRM methods. The technique's advantage is in the direct measurement of the probe particle's scattering intensity vs. height profile in-situ, rather than relying on calculations or inexact system analogs for calibration. To demonstrate the improved versatility of the TIRM method in terms of tunability, precision, and range, we show our results for the hindered near-wall diffusion coefficient for a spherical dielectric particle.

  10. Computer and Information Sciences II : 26th International Symposium on Computer and Information Sciences

    CERN Document Server

    Lent, Ricardo; Sakellari, Georgia

    2012-01-01

    Information technology is the enabling foundation for all of human activity at the beginning of the 21st century, and advances in this area are crucial to all of us. These advances are taking place all over the world and can only be followed and perceived when researchers from all over the world assemble, and exchange their ideas in conferences such as the one presented in this proceedings volume regarding the 26th International Symposium on Computer and Information Systems, held at the Royal Society in London on 26th to 28th September 2011. Computer and Information Sciences II contains novel advances in the state of the art covering applied research in electrical and computer engineering and computer science, across the broad area of information technology. It provides access to the main innovative activities in research across the world, and points to the results obtained recently by some of the most active teams in both Europe and Asia.

  11. Parallel processing using an optical delay-based reservoir computer

    Science.gov (United States)

    Van der Sande, Guy; Nguimdo, Romain Modeste; Verschaffelt, Guy

    2016-04-01

    Delay systems subject to delayed optical feedback have recently shown great potential in solving computationally hard tasks. By implementing a neuro-inspired computational scheme relying on the transient response to optical data injection, high processing speeds have been demonstrated. However, reservoir computing systems based on delay dynamics discussed in the literature are designed by coupling many different stand-alone components which lead to bulky, lack of long-term stability, non-monolithic systems. Here we numerically investigate the possibility of implementing reservoir computing schemes based on semiconductor ring lasers. Semiconductor ring lasers are semiconductor lasers where the laser cavity consists of a ring-shaped waveguide. SRLs are highly integrable and scalable, making them ideal candidates for key components in photonic integrated circuits. SRLs can generate light in two counterpropagating directions between which bistability has been demonstrated. We demonstrate that two independent machine learning tasks , even with different nature of inputs with different input data signals can be simultaneously computed using a single photonic nonlinear node relying on the parallelism offered by photonics. We illustrate the performance on simultaneous chaotic time series prediction and a classification of the Nonlinear Channel Equalization. We take advantage of different directional modes to process individual tasks. Each directional mode processes one individual task to mitigate possible crosstalk between the tasks. Our results indicate that prediction/classification with errors comparable to the state-of-the-art performance can be obtained even with noise despite the two tasks being computed simultaneously. We also find that a good performance is obtained for both tasks for a broad range of the parameters. The results are discussed in detail in [Nguimdo et al., IEEE Trans. Neural Netw. Learn. Syst. 26, pp. 3301-3307, 2015

  12. Computer and Information Sciences III : 27th International Symposium on Computer and Information Sciences

    CERN Document Server

    Lent, Ricardo

    2013-01-01

    Information technology is the enabling foundation science and technology for all of human activity at the beginning of the 21st century, and advances in this area are crucial to all of us. These advances are taking place all over the world and can only be followed and perceived when researchers from all over the world assemble, and exchange their ideas in conferences such as the one presented in this proceedings volume regarding the 27th International Symposium on Computer and Information Systems, held at the Institut Henri Poincare' in Paris on October 3 and 4, 2012. Computer and Information Sciences III: 27th International Symposium on Computer and Information Sciences contains novel advances in the state of the art covering applied research in electrical and computer engineering and computer science, across the broad area of information technology. It provides access to the main innovative activities in research across the world, and points to the results obtained recently by some of the most active teams ...

  13. Computational hybrid anthropometric paediatric phantom library for internal radiation dosimetry

    Science.gov (United States)

    Xie, Tianwu; Kuster, Niels; Zaidi, Habib

    2017-04-01

    Hybrid computational phantoms combine voxel-based and simplified equation-based modelling approaches to provide unique advantages and more realism for the construction of anthropomorphic models. In this work, a methodology and C++ code are developed to generate hybrid computational phantoms covering statistical distributions of body morphometry in the paediatric population. The paediatric phantoms of the Virtual Population Series (IT’IS Foundation, Switzerland) were modified to match target anthropometric parameters, including body mass, body length, standing height and sitting height/stature ratio, determined from reference databases of the National Centre for Health Statistics and the National Health and Nutrition Examination Survey. The phantoms were selected as representative anchor phantoms for the newborn, 1, 2, 5, 10 and 15 years-old children, and were subsequently remodelled to create 1100 female and male phantoms with 10th, 25th, 50th, 75th and 90th body morphometries. Evaluation was performed qualitatively using 3D visualization and quantitatively by analysing internal organ masses. Overall, the newly generated phantoms appear very reasonable and representative of the main characteristics of the paediatric population at various ages and for different genders, body sizes and sitting stature ratios. The mass of internal organs increases with height and body mass. The comparison of organ masses of the heart, kidney, liver, lung and spleen with published autopsy and ICRP reference data for children demonstrated that they follow the same trend when correlated with age. The constructed hybrid computational phantom library opens up the prospect of comprehensive radiation dosimetry calculations and risk assessment for the paediatric population of different age groups and diverse anthropometric parameters.

  14. PREFACE: International Conference on Optics of Excitons in Confined Systems

    Science.gov (United States)

    Viña, Luis; Tejedor, Carlos; Calleja, José M.

    2010-01-01

    The OECS11 (International Conference on Optics of Excitons in Confined Systems) was the eleventh of a very successful series of conferences that started in 1987 in Rome (Italy). Afterwards the conference was held at Naxos (Sicily, Italy, 1991), Montpellier (France, 1993), Cortona (Italy, 1995), Göttingen (Germany, 1997), Ascona (Switzerland, 1999), Montpellier (France, 2001), Lecce (Italy, 2003), Southampton (UK, 2005) and Patti (Sicily, Italy, 2007). It is addressed to scientists who lead fundamental and applied research on the optical properties of excitons in novel condensed-matter nanostructures. The 2009 meeting (7-11 September 2009) has brought together a large representation of the world leading actors in this domain, with the aim of stimulating the exchange of ideas, promoting international collaborations, and coordinating research on the newest exciton-related issues such as quantum information science and exciton quantum-collective phenomena. The meeting has included invited lectures, contributed oral presentations and posters, covering the following general topics: low-dimensional heterostructures: quantum wells, quantum wires and quantum dots polaritons quantum optics with excitons and polaritons many-body effects under coherent and incoherent excitation coherent optical spectroscopy quantum coherence and quantum-phase manipulation Bose-Einstein condensation and other collective phenomena excitons in novel materials The OECS 11 was held at the campus of the Universidad Autónoma de Madrid in Cantoblanco. The scientific program was composed of more than 200 contributions divided into 16 invited talks, 44 oral contributions and 3 poster sessions with a total of 150 presentations. The scientific level of the presentations was guaranteed by a selection process where each contribution was rated by three members of the Program Committee. The Conference has gathered 238 participants from 21 different countries, with the following distribution: Germany (43

  15. The diffractive achromat full spectrum computational imaging with diffractive optics

    KAUST Repository

    Peng, Yifan

    2016-07-11

    Diffractive optical elements (DOEs) have recently drawn great attention in computational imaging because they can drastically reduce the size and weight of imaging devices compared to their refractive counterparts. However, the inherent strong dispersion is a tremendous obstacle that limits the use of DOEs in full spectrum imaging, causing unacceptable loss of color fidelity in the images. In particular, metamerism introduces a data dependency in the image blur, which has been neglected in computational imaging methods so far. We introduce both a diffractive achromat based on computational optimization, as well as a corresponding algorithm for correction of residual aberrations. Using this approach, we demonstrate high fidelity color diffractive-only imaging over the full visible spectrum. In the optical design, the height profile of a diffractive lens is optimized to balance the focusing contributions of different wavelengths for a specific focal length. The spectral point spread functions (PSFs) become nearly identical to each other, creating approximately spectrally invariant blur kernels. This property guarantees good color preservation in the captured image and facilitates the correction of residual aberrations in our fast two-step deconvolution without additional color priors. We demonstrate our design of diffractive achromat on a 0.5mm ultrathin substrate by photolithography techniques. Experimental results show that our achromatic diffractive lens produces high color fidelity and better image quality in the full visible spectrum. © 2016 ACM.

  16. Optical interconnection networks for high-performance computing systems.

    Science.gov (United States)

    Biberman, Aleksandr; Bergman, Keren

    2012-04-01

    Enabled by silicon photonic technology, optical interconnection networks have the potential to be a key disruptive technology in computing and communication industries. The enduring pursuit of performance gains in computing, combined with stringent power constraints, has fostered the ever-growing computational parallelism associated with chip multiprocessors, memory systems, high-performance computing systems and data centers. Sustaining these parallelism growths introduces unique challenges for on- and off-chip communications, shifting the focus toward novel and fundamentally different communication approaches. Chip-scale photonic interconnection networks, enabled by high-performance silicon photonic devices, offer unprecedented bandwidth scalability with reduced power consumption. We demonstrate that the silicon photonic platforms have already produced all the high-performance photonic devices required to realize these types of networks. Through extensive empirical characterization in much of our work, we demonstrate such feasibility of waveguides, modulators, switches and photodetectors. We also demonstrate systems that simultaneously combine many functionalities to achieve more complex building blocks. We propose novel silicon photonic devices, subsystems, network topologies and architectures to enable unprecedented performance of these photonic interconnection networks. Furthermore, the advantages of photonic interconnection networks extend far beyond the chip, offering advanced communication environments for memory systems, high-performance computing systems, and data centers.

  17. Computer Aided Interpretation Approach for Optical Tomographic Images

    CERN Document Server

    Klose, Christian D; Netz, Uwe; Beuthan, Juergen; Hielscher, Andreas H

    2010-01-01

    A computer-aided interpretation approach is proposed to detect rheumatic arthritis (RA) of human finger joints in optical tomographic images. The image interpretation method employs a multi-variate signal detection analysis aided by a machine learning classification algorithm, called Self-Organizing Mapping (SOM). Unlike in previous studies, this allows for combining multiple physical image parameters, such as minimum and maximum values of the absorption coefficient for identifying affected and not affected joints. Classification performances obtained by the proposed method were evaluated in terms of sensitivity, specificity, Youden index, and mutual information. Different methods (i.e., clinical diagnostics, ultrasound imaging, magnet resonance imaging and inspection of optical tomographic images), were used as "ground truth"-benchmarks to determine the performance of image interpretations. Using data from 100 finger joints, findings suggest that some parameter combinations lead to higher sensitivities while...

  18. Non-diffusing photochromic gel for optical computed tomography phantoms

    Science.gov (United States)

    Jordan, K.

    2013-06-01

    This study examines photochromic response in radiation sensitive hydrogels. Genipin, crosslinked, gelatin gel can support high resolution images because the chromophores do not diffuse. A low power, 633 nm He-Ne laser was used to write lines into the gels by a photobleaching reaction. Optical cone-beam computed tomography (CBCT) scans mapped the high resolution images in 3D with 0.25 mm voxel resolution. A straight line was written into a deformed gel and then readout in its relaxed, initial shape. The curved, photo-bleached line demonstrated deformable 3D dosimetry is possible with this system to the balloon edge. High resolution, photochromic images provide key information for characterizing optical CT scanners and 3D dosimeters. Many, ionizing radiation, dosimeter materials demonstrate either a photochromic or photothermal response, allowing this approach to be widely used in quantitative 3D scanning.

  19. Dynamic computer-generated nonlinear-optical holograms

    Science.gov (United States)

    Liu, Haigang; Li, Jun; Fang, Xiangling; Zhao, Xiaohui; Zheng, Yuanlin; Chen, Xianfeng

    2017-08-01

    We propose and experimentally demonstrate dynamic nonlinear optical holograms by introducing the concept of computer-generated holograms for second-harmonic generation of a structured fundamental wave with a specially designed wave front. The generation of Laguerre-Gaussian second-harmonic beams is investigated in our experiment. Such a method, which only dynamically controls the wave front of the fundamental wave by a spatial light modulator, does not need domain inversion in nonlinear crystals and hence is a more flexible way to achieve the off-axis nonlinear second-harmonic beams. It can also be adopted in other schemes and has potential applications in nonlinear frequency conversion, optical signal processing, and real-time hologram, etc.

  20. Linear optical quantum computing in a single spatial mode.

    Science.gov (United States)

    Humphreys, Peter C; Metcalf, Benjamin J; Spring, Justin B; Moore, Merritt; Jin, Xian-Min; Barbieri, Marco; Kolthammer, W Steven; Walmsley, Ian A

    2013-10-11

    We present a scheme for linear optical quantum computing using time-bin-encoded qubits in a single spatial mode. We show methods for single-qubit operations and heralded controlled-phase (cphase) gates, providing a sufficient set of operations for universal quantum computing with the Knill-Laflamme-Milburn [Nature (London) 409, 46 (2001)] scheme. Our protocol is suited to currently available photonic devices and ideally allows arbitrary numbers of qubits to be encoded in the same spatial mode, demonstrating the potential for time-frequency modes to dramatically increase the quantum information capacity of fixed spatial resources. As a test of our scheme, we demonstrate the first entirely single spatial mode implementation of a two-qubit quantum gate and show its operation with an average fidelity of 0.84±0.07.

  1. 13th International Conference on Computer Aided Engineering

    CERN Document Server

    Pietrusiak, Damian

    2017-01-01

    These proceedings of the 13th International Conference on Computer Aided Engineering present selected papers from the event, which was held in Polanica Zdrój, Poland, from June 22 to 25, 2016. The contributions are organized according to thematic sections on the design and manufacture of machines and technical systems; durability prediction; repairs and retrofitting of power equipment; strength and thermodynamic analyses for power equipment; design and calculation of various types of load-carrying structures; numerical methods for dimensioning materials handling; and long-distance transport equipment. The conference and its proceedings offer a major interdisciplinary forum for researchers and engineers to present the most innovative studies and advances in this dynamic field.

  2. First International Conference Multimedia Processing, Communication and Computing Applications

    CERN Document Server

    Guru, Devanur

    2013-01-01

    ICMCCA 2012 is the first International Conference on Multimedia Processing, Communication and Computing Applications and the theme of the Conference is chosen as ‘Multimedia Processing and its Applications’. Multimedia processing has been an active research area contributing in many frontiers of today’s science and technology. This book presents peer-reviewed quality papers on multimedia processing, which covers a very broad area of science and technology. The prime objective of the book is to familiarize readers with the latest scientific developments that are taking place in various fields of multimedia processing and is widely used in many disciplines such as Medical Diagnosis, Digital Forensic, Object Recognition, Image and Video Analysis, Robotics, Military, Automotive Industries, Surveillance and Security, Quality Inspection, etc. The book will assist the research community to get the insight of the overlapping works which are being carried out across the globe at many medical hospitals and instit...

  3. GPU-based computational adaptive optics for volumetric optical coherence microscopy

    Science.gov (United States)

    Tang, Han; Mulligan, Jeffrey A.; Untracht, Gavrielle R.; Zhang, Xihao; Adie, Steven G.

    2016-03-01

    Optical coherence tomography (OCT) is a non-invasive imaging technique that measures reflectance from within biological tissues. Current higher-NA optical coherence microscopy (OCM) technologies with near cellular resolution have limitations on volumetric imaging capabilities due to the trade-offs between resolution vs. depth-of-field and sensitivity to aberrations. Such trade-offs can be addressed using computational adaptive optics (CAO), which corrects aberration computationally for all depths based on the complex optical field measured by OCT. However, due to the large size of datasets plus the computational complexity of CAO and OCT algorithms, it is a challenge to achieve high-resolution 3D-OCM reconstructions at speeds suitable for clinical and research OCM imaging. In recent years, real-time OCT reconstruction incorporating both dispersion and defocus correction has been achieved through parallel computing on graphics processing units (GPUs). We add to these methods by implementing depth-dependent aberration correction for volumetric OCM using plane-by-plane phase deconvolution. Following both defocus and aberration correction, our reconstruction algorithm achieved depth-independent transverse resolution of 2.8 um, equal to the diffraction-limited focal plane resolution. We have translated the CAO algorithm to a CUDA code implementation and tested the speed of the software in real-time using two GPUs - NVIDIA Quadro K600 and Geforce TITAN Z. For a data volume containing 4096×256×256 voxels, our system's processing speed can keep up with the 60 kHz acquisition rate of the line-scan camera, and takes 1.09 seconds to simultaneously update the CAO correction for 3 en face planes at user-selectable depths.

  4. Multiscale modeling and computation of optically manipulated nano devices

    Science.gov (United States)

    Bao, Gang; Liu, Di; Luo, Songting

    2016-07-01

    We present a multiscale modeling and computational scheme for optical-mechanical responses of nanostructures. The multi-physical nature of the problem is a result of the interaction between the electromagnetic (EM) field, the molecular motion, and the electronic excitation. To balance accuracy and complexity, we adopt the semi-classical approach that the EM field is described classically by the Maxwell equations, and the charged particles follow the Schrödinger equations quantum mechanically. To overcome the numerical challenge of solving the high dimensional multi-component many-body Schrödinger equations, we further simplify the model with the Ehrenfest molecular dynamics to determine the motion of the nuclei, and use the Time-Dependent Current Density Functional Theory (TD-CDFT) to calculate the excitation of the electrons. This leads to a system of coupled equations that computes the electromagnetic field, the nuclear positions, and the electronic current and charge densities simultaneously. In the regime of linear responses, the resonant frequencies initiating the out-of-equilibrium optical-mechanical responses can be formulated as an eigenvalue problem. A self-consistent multiscale method is designed to deal with the well separated space scales. The isomerization of azobenzene is presented as a numerical example.

  5. Computationally Efficient Nonlinearity Compensation for Coherent Fiber-Optic Systems

    Institute of Scientific and Technical Information of China (English)

    Likai Zhu; Guifang Li

    2012-01-01

    Split-step digital backward propagation (DBP) can be combined with coherent detection to compensate for fiber nonlinear impairments. A large number of DBP steps is usually needed for a long-haul fiber system, and this creates a heavy computational load. In a trade-off between complexity and performance, interchannel nonlinearity can be disregarded in order to simplify the DBP algorithm. The number of steps can also be reduced at the expense of performance. In periodic dispersion-managed long-haul transmission systems, optical waveform distortion is dominated by chromatic dispersion. As a result, the nonlinearity of the optical signal repeats in every dispersion period. Because of this periodic behavior, DBP of many fiber spans can be folded into one span. Using this distance-folded DBP method, the required computation for a transoceanic transmission system with full inline dispersion compensation can be reduced by up to two orders of magnitude with negligible penalty. The folded DBP method can be modified to compensate for nonlinearity in fiber links with non-zero residua dispersion per span.

  6. Quantum computing by optical control of electron spins

    CERN Document Server

    Liu, Ren-Bao; Sham, L J

    2010-01-01

    We review the progress and main challenges in implementing large-scale quantum computing by optical control of electron spins in quantum dots (QDs). Relevant systems include self-assembled QDs of III-V or II-VI compound semiconductors (such as InGaAs and CdSe), monolayer fluctuation QDs in compound semiconductor quantum wells, and impurity centers in solids such as P-donors in silicon and nitrogen-vacancy centers in diamond. The decoherence of the electron spin qubits is discussed and various schemes for countering the decoherence problem are reviewed. We put forward designs of local nodes consisting of a few qubits which can be individually addressed and controlled. Remotely separated local nodes are connected by photonic structures (microcavities and waveguides) to form a large-scale distributed quantum system or a quantum network. The operation of the quantum network consists of optical control of a single electron spin, coupling of two spins in a local nodes, optically controlled quantum interfacing betwe...

  7. Computer-assisted optics teaching at the Moscow Institute of Physics and Technology

    Science.gov (United States)

    Soboleva, Natalia N.; Kozel, Stanislav M.; Lockshin, Gennady R.; Entin, M. A.; Galichsky, K. V.; Lebedinsky, P. L.; Zhdanovich, P. M.

    1995-10-01

    Traditional methods used in optics teaching lack clarity and vividness when illustrating abstract notions such as polarization or interference. Here's where computer models may help, but they usually show only a single phenomenon or process and don't let the student see the entire picture. For this reason at Moscow Institute of Physics and Technology was developed the courseware 'Wave Optics on the Computer' consisting of a number of related simulations. It is intended for students studying optics at the Universities. Recently we have developed different simulations in optics for secondary school level. They are included as part of large computer courseware 'Physics by Pictures'. The courseware 'Wave Optics on the Computer' consists of nine large simulation programs and the textbook. The programs are simulating basic phenomena of wave optics. parameters of optical systems can be varied by the user. The textbook contains theoretical considerations on studied optical phenomena, recommendations concerning work with computer programs, and, especially for those wishing to deeper understand wave optics, original problems for individual solution. At the Moscow Institute of Physics and Technology the course 'Wave Optics on the Computer' is used for teaching optics in the course of general physics. The course provides both the computer assisted teaching for lectures support and computer assisted learning for students during seminars in the computer classroom.

  8. Exploration of Salt Wedge Dynamics in the Columbia River Estuary Using Optical Measurements of Internal Ship Wakes.

    Science.gov (United States)

    Holman, R. A.; Greydanus, S. J.

    2014-12-01

    In May of 2013 and beyond, Argus optical measurements of the mouth of the Columbia River estuary and plume were collected as part of the RIVET II multi-investigator field experiment. One surprise was the strength of eddy and internal wave signatures observed in movies computed from one-minute averages of high-frequency snapshots (such that gravity waves were averaged out but slicks and variable surface roughness remained). In particular, passing ships left wakes that propagated away at speeds on the order of 0.5 m/s, much slower than gravity waves and presumably surface manifestations of internal waves associated with the time-varying salt-wedge. Thus, these internal ship wakes appear to act as probes of internal stratification dynamics. This paper will explore the time variations of these internal wakes and relate them to corresponding variations in the estuary salt wedge.

  9. Linear Optical Quantum Computing in a Single Spatial Mode

    Science.gov (United States)

    Walmsley, Ian

    2014-05-01

    We present a scheme for linear optical quantum computing using time-bin encoded qubits in a single spatial mode. This scheme allows arbitrary numbers of qubits to be encoded in the same mode, circumventing the requirement for many spatial modes that challenges the scalability of other schemes, and exploiting the inherent stability and robustness of time-frequency optical modes. This approach leverages the architecture of modern telecommunications systems, and opens a door to very high dimensional Hilbert spaces while maintaining compact device designs. Further, temporal encodings benefit from intrinsic robustness to inhomogeneities in transmission mediums. These advantages have been recognized in works exploring the preparation of time-frequency entangled states both for tests of fundamental quantum phenomena, and for quantum communications technologies including key distribution and teleportation. Here we extend this idea to computation. In particular, we present methods for single-qubit operations and heralded controlled phase (CPhase) gates, providing a sufficient set of operations for universal quantum computing with the Knill-Laflamme-Milburn scheme. As a test of our scheme, we demonstrate the first entirely single spatial mode implementation of a two-qubit quantum gate and show its operation with an average fidelity of 0.84 /pm 0.07. An analysis of the performance of current technologies suggests that our scheme offers a promising route for the construction of quantum circuits beyond the few-qubit level. In addition, we foresee that our investigation may motivate further development of the approaches presented into a regime in which time bins are temporally overlapped and frequency based manipulations become necessary, opening up encodings of even higher densities. This work was supported by the Engineering and Physical Sciences Research Council (EP/H03031X/1), the European Commission project Q-ESSENCE (248095) and the Air Force Office of Scientific Research

  10. Papers from the Fifth International Brain-Computer Interface Meeting

    Science.gov (United States)

    Huggins, Jane E.; Wolpaw, Jonathan R.

    2014-06-01

    Brain-computer interfaces (BCIs), also known as brain-machine interfaces (BMIs), translate brain activity into new outputs that replace, restore, enhance, supplement or improve natural brain outputs. BCI research and development has grown rapidly for the past two decades. It is beginning to provide useful communication and control capacities to people with severe neuromuscular disabilities; and it is expanding into new areas such as neurorehabilitation that may greatly increase its clinical impact. At the same time, significant challenges remain, particularly in regard to translating laboratory advances into clinical use. The papers in this special section report some of the work presented at the Fifth International BCI Meeting held on 3-7 June 2013 at the Asilomar Conference Center in Pacific Grove, California, USA. Like its predecessors over the past 15 years, this meeting was supported by the National Institutes of Health, the National Science Foundation, and a variety of other governmental and private sponsors [1]. This fifth meeting was organized and managed by a program committee of BCI researchers from throughout the world [2]. It retained the distinctive retreat-style format developed by the Wadsworth Center researchers who organized and managed the first four meetings. The 301 attendees came from 165 research groups in 29 countries; 37% were students or postdoctoral fellows. Of more than 200 extended abstracts submitted for peer review, 25 were selected for oral presentation [3], and 181 were presented as posters [4] and published in the open-access conference proceedings [5]. The meeting featured 19 highly interactive workshops [6] covering the broad spectrum of BCI research and development, as well as many demonstrations of BCI systems and associated technology. Like the first four meetings, this one included attendees and embraced topics from across the broad spectrum of disciplines essential to effective BCI research and development, including

  11. Computational Nanophotonics: Model Optical Interactions and Transport in Tailored Nanosystem Architectures

    Energy Technology Data Exchange (ETDEWEB)

    Stockman, Mark [Georgia State University Research Foundation; Gray, Steven [Argon National Laboratory

    2014-02-21

    The program is directed toward development of new computational approaches to photoprocesses in nanostructures whose geometry and composition are tailored to obtain desirable optical responses. The emphasis of this specific program is on the development of computational methods and prediction and computational theory of new phenomena of optical energy transfer and transformation on the extreme nanoscale (down to a few nanometers).

  12. Advances in Computing and Information Technology : Proceedings of the Second International Conference on Advances in Computing and Information Technology

    CERN Document Server

    Nagamalai, Dhinaharan; Chaki, Nabendu

    2013-01-01

    The international conference on Advances in Computing and Information technology (ACITY 2012) provides an excellent international forum for both academics and professionals for sharing knowledge and results in theory, methodology and applications of Computer Science and Information Technology. The Second International Conference on Advances in Computing and Information technology (ACITY 2012), held in Chennai, India, during July 13-15, 2012, covered a number of topics in all major fields of Computer Science and Information Technology including: networking and communications, network security and applications, web and internet computing, ubiquitous computing, algorithms, bioinformatics, digital image processing and pattern recognition, artificial intelligence, soft computing and applications. Upon a strength review process, a number of high-quality, presenting not only innovative ideas but also a founded evaluation and a strong argumentation of the same, were selected and collected in the present proceedings, ...

  13. Soft Computing Applications : Proceedings of the 5th International Workshop Soft Computing Applications

    CERN Document Server

    Fodor, János; Várkonyi-Kóczy, Annamária; Dombi, Joszef; Jain, Lakhmi

    2013-01-01

                    This volume contains the Proceedings of the 5thInternational Workshop on Soft Computing Applications (SOFA 2012).                                The book covers a broad spectrum of soft computing techniques, theoretical and practical applications employing knowledge and intelligence to find solutions for world industrial, economic and medical problems. The combination of such intelligent systems tools and a large number of applications introduce a need for a synergy of scientific and technological disciplines in order to show the great potential of Soft Computing in all domains.                   The conference papers included in these proceedings, published post conference, were grouped into the following area of research: ·         Soft Computing and Fusion Algorithms in Biometrics, ·         Fuzzy Theory, Control andApplications, ·         Modelling and Control Applications, ·         Steps towa...

  14. Silica optical fiber technology for devices and components design, fabrication, and international standards

    CERN Document Server

    Oh, Kyunghwan

    2012-01-01

    From basic physics to new products, Silica Optical Fiber Technology for Device and Components examines all aspects of specialty optical fibers. Moreover, the inclusion of the latest international standards governing optical fibers enables you to move from research to fabrication to commercialization. Reviews all the latest specialty optical fiber technologies, including those developed for high capacity WDM applications; broadband fiber amplifiers; fiber filleters based on periodic coupling; fiber branching devices; and fiber terminations Discusses key differences among sing

  15. Universal quantum computation using all-optical hybrid encoding

    Institute of Scientific and Technical Information of China (English)

    郭奇; 程留永; 王洪福; 张寿

    2015-01-01

    By employing displacement operations, single-photon subtractions, and weak cross-Kerr nonlinearity, we propose an alternative way of implementing several universal quantum logical gates for all-optical hybrid qubits encoded in both single-photon polarization state and coherent state. Since these schemes can be straightforwardly implemented only using local operations without teleportation procedure, therefore, less physical resources and simpler operations are required than the existing schemes. With the help of displacement operations, a large phase shift of the coherent state can be obtained via currently available tiny cross-Kerr nonlinearity. Thus, all of these schemes are nearly deterministic and feasible under current technology conditions, which makes them suitable for large-scale quantum computing.

  16. Optical computing with soliton trains in Bose–Einstein condensates

    KAUST Repository

    Pinsker, Florian

    2015-07-01

    © 2015 World Scientific Publishing Company. Optical computing devices can be implemented based on controlled generation of soliton trains in single and multicomponent Bose-Einstein condensates (BEC). Our concepts utilize the phenomenon that the frequency of soliton trains in BEC can be governed by changing interactions within the atom cloud [F. Pinsker, N. G. Berloff and V. M. Pérez-García, Phys. Rev. A87, 053624 (2013), arXiv:1305.4097]. We use this property to store numbers in terms of those frequencies for a short time until observation. The properties of soliton trains can be changed in an intended way by other components of BEC occupying comparable states or via phase engineering. We elucidate, in which sense, such an additional degree of freedom can be regarded as a tool for controlled manipulation of data. Finally, the outcome of any manipulation made is read out by observing the signature within the density profile.

  17. 5th International Conference on Design Computing and Cognition

    CERN Document Server

    2014-01-01

    Design thinking, the label given to the acts of designing, has become a paradigmatic view that has transcended the discipline of design and is now widely used in business and elsewhere. As a consequence there is an increasing interest in design research. This is because of the realization that design is part of the wealth creation of a nation and needs to be better understood and taught. The continuing globalization of industry and trade has required nations to re-examine where their core contributions lie if not in production efficiency. Design is a precursor to manufacturing for physical objects and is the precursor to implementation for virtual objects. At the same time, the need for sustainable development requires the design of new products and processes, which feeds a movement towards design innovations and inventions. The papers in this volume are from the Fifth International Conference on Design Computing and Cognition (DCC’12) held at Texas A & M University, USA. They represent the state-of-th...

  18. Computational fluid dynamics for turbomachinery internal air systems.

    Science.gov (United States)

    Chew, John W; Hills, Nicholas J

    2007-10-15

    Considerable progress in development and application of computational fluid dynamics (CFD) for aeroengine internal flow systems has been made in recent years. CFD is regularly used in industry for assessment of air systems, and the performance of CFD for basic axisymmetric rotor/rotor and stator/rotor disc cavities with radial throughflow is largely understood and documented. Incorporation of three-dimensional geometrical features and calculation of unsteady flows are becoming commonplace. Automation of CFD, coupling with thermal models of the solid components, and extension of CFD models to include both air system and main gas path flows are current areas of development. CFD is also being used as a research tool to investigate a number of flow phenomena that are not yet fully understood. These include buoyancy-affected flows in rotating cavities, rim seal flows and mixed air/oil flows. Large eddy simulation has shown considerable promise for the buoyancy-driven flows and its use for air system flows is expected to expand in the future.

  19. Computer-aided interpretation approach for optical tomographic images

    Science.gov (United States)

    Klose, Christian D.; Klose, Alexander D.; Netz, Uwe J.; Scheel, Alexander K.; Beuthan, Jürgen; Hielscher, Andreas H.

    2010-11-01

    A computer-aided interpretation approach is proposed to detect rheumatic arthritis (RA) in human finger joints using optical tomographic images. The image interpretation method employs a classification algorithm that makes use of a so-called self-organizing mapping scheme to classify fingers as either affected or unaffected by RA. Unlike in previous studies, this allows for combining multiple image features, such as minimum and maximum values of the absorption coefficient for identifying affected and not affected joints. Classification performances obtained by the proposed method were evaluated in terms of sensitivity, specificity, Youden index, and mutual information. Different methods (i.e., clinical diagnostics, ultrasound imaging, magnet resonance imaging, and inspection of optical tomographic images), were used to produce ground truth benchmarks to determine the performance of image interpretations. Using data from 100 finger joints, findings suggest that some parameter combinations lead to higher sensitivities, while others to higher specificities when compared to single parameter classifications employed in previous studies. Maximum performances are reached when combining the minimum/maximum ratio of the absorption coefficient and image variance. In this case, sensitivities and specificities over 0.9 can be achieved. These values are much higher than values obtained when only single parameter classifications were used, where sensitivities and specificities remained well below 0.8.

  20. Computational Study of Stratified Combustion in an Optical Diesel Engine

    KAUST Repository

    Jaasim, Mohammed

    2017-03-28

    Full cycle simulations of KAUST optical diesel engine were conducted in order to provide insights into the details of fuel spray, mixing, and combustion characteristics at different start of injection (SOI) conditions. Although optical diagnostics provide valuable information, the high fidelity simulations with matched parametric conditions improve fundamental understanding of relevant physical and chemical processes by accessing additional observables such as the local mixture distribution, intermediate species concentrations, and detailed chemical reaction rates. Commercial software, CONVERGE™, was used as the main simulation tool, with the Reynolds averaged Navier-Stokes (RANS) turbulence model and the multi-zone (SAGE) combustion model to compute the chemical reaction terms. SOI is varied from late compression ignition (CI) to early partially premixed combustion (PPC) conditions. The simulation results revealed a stronger correlation between fuel injection timing and combustion phasing for late SOI conditions, whereas the combustion phasing starts to decouple from SOI for early SOI cases. The predictions are consistent with the experimental observations, in terms of the overall trends in combustion and emission characteristics, while the high fidelity simulations provided further insights into the effects of mixture stratifications resulting from different SOI conditions.

  1. Durable innovative solar optical materials: the international challenge

    Energy Technology Data Exchange (ETDEWEB)

    Lampert, C.M.

    1982-01-01

    A variety of optical coatings are discussed in the context of solar energy utilization. Well known coatings such as heat mirrors, selective absorbers, and reflective films are covered briefly. Emphasis is placed on the materials limitations and design choices for various lesser known optical coatings and materials. Physical and optical properties are detailed for protective antireflection films, fluorescent concentrator materials, holographic films, cold mirrors, radiative cooling surfaces, and optical switching films including electrochromic, thermochromic, photochromic, and liquid crystal types. For many of these materials research is only now being considered, and various design and durability issues must be addressed.

  2. Durable innovative solar optical materials - the international challenge

    Science.gov (United States)

    Lampert, Carl M.

    1982-04-01

    A variety of optical coatings are discussed in the context of solar energy utilization. Well known coatings such as heat mirrors, selective absorbers, and reflective films are covered briefly. Emphasis is placed on the materials limitations and design choices for various lesser known optical coatings and materials. Physical and optical properties are detailed for protective antireflection films, fluorescent concentrator materials, holographic films, cold mirrors, radiative cooling surfaces, and optical switching films including electrochromic, thermochromic, photochromic, and liquid crystal types. For many of these materials research is only now being considered, and various design and durability issues must be addressed.

  3. Durable innovative solar optical materials: The international challenge

    Science.gov (United States)

    Lampert, C. M.

    1982-07-01

    A variety of optical coatings is discussed in the context of solar energy utilization. Well known coatings such as heat mirrors, selective absorbers, and reflective films are covered briefly. Emphasis is placed on the materials limitations and design choices for various lesser known optical coatings and materials. Physical and optical properties are detailed for protective antireflection films, fluorescent concentrator materials, holographic films, cold mirrors, radiative cooling surfaces, and optical switching films including electrochromic, thermochromic, photochromic, and liquid crystal types. For many of these materials research is only now being considered, and various design and durability issues must be addressed.

  4. International Conference on New Technologies in the Humanities and Fourth International Conference on Optics Within Life Sciences

    CERN Document Server

    Bally, Gert

    1997-01-01

    New high-tech developments in the field of optics show increasing applicability not only in classical technological fields but also in the humanities. This book contains selected contributions to an international, interdisciplinary joint conference on "New Technologies in the Humanities" and "Optics Within Life Sciences". Its objective is to forward interdisciplinary information and communication between specialists in optics as well as in medicine, biology, environmental sciences, and cultural heritage. It is unique as a presentation of new optical technologies for cultural heritage protection. The contributions cover international research activities in the areas of archaeological research and new technologies, holography and interferometry, material analysis, laser cleaning, pattern recognition, unconventional microscopy, spectroscopial techniques, and profilometry.

  5. 3rd International Conference on Frontiers of Intelligent Computing : Theory and Applications

    CERN Document Server

    Biswal, Bhabendra; Udgata, Siba; Mandal, JK

    2015-01-01

    Volume 1 contains 95 papers presented at FICTA 2014: Third International Conference on Frontiers in Intelligent Computing: Theory and Applications. The conference was held during 14-15, November, 2014 at Bhubaneswar, Odisha, India.  This volume contains papers mainly focused on Data Warehousing and Mining, Machine Learning, Mobile and Ubiquitous Computing, AI, E-commerce & Distributed Computing and Soft Computing, Evolutionary Computing, Bio-inspired Computing and its Applications.

  6. Hyperparallel optical quantum computation assisted by atomic ensembles embedded in double-sided optical cavities

    Science.gov (United States)

    Li, Tao; Long, Gui-Lu

    2016-08-01

    We propose an effective, scalable, hyperparallel photonic quantum computation scheme in which photonic qubits are hyperencoded both in the spatial degrees of freedom (DOF) and the polarization DOF of each photon. The deterministic hyper-controlled-not (hyper-cnot) gate on a two-photon system is attainable with our interesting interface between the polarized photon and the collective spin wave (magnon) of an atomic ensemble embedded in a double-sided optical cavity, and it doubles the operations in the conventional quantum cnot gate. Moreover, we present a compact hyper-cnotN gate on N +1 hyperencoded photons with only two auxiliary cavity-magnon systems, not more, and it can be faithfully constituted with current experimental techniques. Our proposal enables various applications with the hyperencoded photons in quantum computing and quantum networks.

  7. Computational Model Of Fiber Optic, Arc Fusion Splicing; Experimental Comparison

    Science.gov (United States)

    Ruffin, Paul; Frost, Walter; Long, Wayne

    1989-02-01

    Acknowledgement: The assistance and support of the MICOM Army Missile Command is gratefully appreciated. An analytical tool to investigate the arc fusion splicing of optical fibers is developed. The physical model incorporates heat transfer and thermal, visco elastic strain. The heat transfer equations governing radiation, conduction and convection during arc heating are formulated. The radiation heat flux impinging on the fiber optics is modeled based on reported experimental analysis of a generic type arc discharge. The fusion process considers deformation of the fiber due to thermal, viscous and elastic strain. A Maxwell stress-strain relationship is assumed. The model assumes an initial gap at the beginning of the arc which is closed by a press-stroke during the heating cycle. All physical properties of the fused silica glass fibers are considered as functions of temperature based on available experimental data. A computer algorithm has been developed to solve the system of governing equations and parametric studies carried out. An experiment using a FSM-20 arc fusion splicer manufactured by Fujikura Ltd. was carried out to provide experimental verification of the analytical model. In the experiment a continuous fiber was positioned in the arc and cyclic heating and cooling was carried out. One end of the fiber was clamped and the other was free to move. The fiber was heated for 6 seconds and cooled for 3 minutes for several cycles. At the end of each cooling process, photographs of the deformation of the fiber were taken. The results showed that the fiber necked down on the free end and buldged up on the fixed end. With repeated heating and cooling cycles, the optical fiber eventually necked down to the point that it melted in two. The analytical model was run for the conditions of the experiment. Comparisons of the predicted deformation of the optical fiber with those measured is given. The analytical model displays all of the physical phenomenon of fiber

  8. The normal internal carotid artery: a computed tomography angiographic study

    Energy Technology Data Exchange (ETDEWEB)

    Koskinen, Suvi Maaria; Valanne, Leena; Silvennoinen, Heli [Helsinki University Central Hospital and University of Helsinki, Department of Radiology, HUS Medical Imaging Center, Helsinki (Finland); Soinne, Lauri [Helsinki University Central Hospital, Department of Neurology, Helsinki (Finland)

    2014-09-15

    Systematic computed tomography angiographic (CTA) studies investigating variation in internal carotid artery (ICA) luminal diameters (LDs) are scarce. Knowledge of the normal intra-individual LD variability would provide a cut-off value for detection of more subtle collapses. In addition, low intra-individual variability would allow using contralateral LD as a reference for estimation of stenosis degree in cases where ipsilateral measurement is hampered. Therefore, our aim was to investigate intra-individual LD variation of normal ICA. We retrospectively collected multidetector high-speed CTAs of 104 patients younger than 40 years who were considered not to have carotid pathology. We carried out independent measurements of the common carotid artery (CCA) and ICA LDs bilaterally from axial source images by two observers, analysing side-to-side LD differences from averaged double measurements with a paired t test. We discovered no significant side-to-side LD differences. In the female group, the mean differences (mm) with 95 % confidence intervals were 0.08 (0.00, 0.17) for CCA and 0.03 (-0.04, 0.11) for ICA, with ICA LD standard deviation of 0.4 mm. In the male group, these were: 0.06 (-0.04, 0.17), 0.02 (-0.07, 0.11) and 0.4 mm, respectively. We detected no ICA agenesis. The intrinsic intra-individual variation of the LD of normal ICA is minimal. This uniformity may serve as the basis for detection of subtle grades of side-to-side variation caused by pathology. (orig.)

  9. Optical imaging of oral pathological tissue using optical coherence tomography and synchrotron radiation computed microtomography

    Science.gov (United States)

    Cânjǎu, Silvana; Todea, Carmen; Sinescu, Cosmin; Negrutiu, Meda L.; Duma, Virgil; Mǎnescu, Adrian; Topalǎ, Florin I.; Podoleanu, Adrian Gh.

    2013-06-01

    The efforts aimed at early diagnosis of oral cancer should be prioritized towards developing a new screening instrument, based on optical coherence tomography (OCT), to be used directly intraorally, able to perform a fast, real time, 3D and non-invasive diagnosis of oral malignancies. The first step in this direction would be to optimize the OCT image interpretation of oral tissues. Therefore we propose plastination as a tissue preparation method that better preserves three-dimensional structure for study by new optical imaging techniques. The OCT and the synchrotron radiation computed microtomography (micro-CT) were employed for tissue sample analyze. For validating the OCT results we used the gold standard diagnostic procedure for any suspicious lesion - histopathology. This is a preliminary study of comparing features provided by OCT and Micro-CT. In the conditions of the present study, OCT proves to be a highly promising imaging modality. The use of x-ray based topographic imaging of small biological samples has been limited by the low intrinsic x-ray absorption of non-mineralized tissue and the lack of established contrast agents. Plastination can be used to enhance optical imagies of oral soft tissue samples.

  10. Perspectives of the International Conference of Computational Science 2014

    NARCIS (Netherlands)

    Abramson, D.; Krzhizhanovskaya, V.V.; Lees, M.

    2015-01-01

    Computational Science has enabled a raft of science that was either impossible, dangerous, or extremely expensive. It is arguably one of the most multi-disciplinary research endeavors, and draws on foundational work in mathematics and computer science. Computational Science has applicability in

  11. Real-Time Observation of Internal Motion within Ultrafast Dissipative Optical Soliton Molecules

    Science.gov (United States)

    Krupa, Katarzyna; Nithyanandan, K.; Andral, Ugo; Tchofo-Dinda, Patrice; Grelu, Philippe

    2017-06-01

    Real-time access to the internal ultrafast dynamics of complex dissipative optical systems opens new explorations of pulse-pulse interactions and dynamic patterns. We present the first direct experimental evidence of the internal motion of a dissipative optical soliton molecule generated in a passively mode-locked erbium-doped fiber laser. We map the internal motion of a soliton pair molecule by using a dispersive Fourier-transform imaging technique, revealing different categories of internal pulsations, including vibrationlike and phase drifting dynamics. Our experiments agree well with numerical predictions and bring insights to the analogy between self-organized states of lights and states of the matter.

  12. Computational adaptive optics for broadband interferometric tomography of tissues and cells

    Science.gov (United States)

    Adie, Steven G.; Mulligan, Jeffrey A.

    2016-03-01

    Adaptive optics (AO) can shape aberrated optical wavefronts to physically restore the constructive interference needed for high-resolution imaging. With access to the complex optical field, however, many functions of optical hardware can be achieved computationally, including focusing and the compensation of optical aberrations to restore the constructive interference required for diffraction-limited imaging performance. Holography, which employs interferometric detection of the complex optical field, was developed based on this connection between hardware and computational image formation, although this link has only recently been exploited for 3D tomographic imaging in scattering biological tissues. This talk will present the underlying imaging science behind computational image formation with optical coherence tomography (OCT) -- a beam-scanned version of broadband digital holography. Analogous to hardware AO (HAO), we demonstrate computational adaptive optics (CAO) and optimization of the computed pupil correction in 'sensorless mode' (Zernike polynomial corrections with feedback from image metrics) or with the use of 'guide-stars' in the sample. We discuss the concept of an 'isotomic volume' as the volumetric extension of the 'isoplanatic patch' introduced in astronomical AO. Recent CAO results and ongoing work is highlighted to point to the potential biomedical impact of computed broadband interferometric tomography. We also discuss the advantages and disadvantages of HAO vs. CAO for the effective shaping of optical wavefronts, and highlight opportunities for hybrid approaches that synergistically combine the unique advantages of hardware and computational methods for rapid volumetric tomography with cellular resolution.

  13. Internal structure of an optical null Ronchi grating test for a plano-parabolic lens.

    Science.gov (United States)

    Ortega-Vidals, Paula; Juárez-Reyes, Salvador Alejandro; Silva-Ortigoza, Gilberto; Cabrera-Rosas, Omar de J

    2016-01-01

    In this work we use geometrical optics and the caustic touching theorem, introduced by Berry, to describe the internal structure of the null Ronchi grating for a plano-parabolic lens illuminated by a point light source placed on the optical axis. The aim of this work is to explain the role of the caustic region in the process of morphology change between image and object in computing the null Ronchi grating. To this end, we obtain the analytic expression of the null Ronchi grating, and after that we deeply study the change in morphology between a single straight fringe image at the Ronchigram and the multiple curve rulings that can generate it (one open and one closed). We analyze exactly how multiple rulings generate the same straight image fringe, or how an entire ruling collapses into a single point image. For this analysis, we take different observation planes at different positions with respect to the caustic region. Finally, we characterize this topological change as one of two possible kinds depending on the relative position between the observation plane and the caustic region.

  14. Proceedings of the 2012 International Conference of Modern Computer Science and Applications

    CERN Document Server

    2013-01-01

    This volume contains the proceedings of the 2012 International Conference of Modern Computer Science and Applications (MCSA 2012) which was held on September 8, 2012 in Wuhan, China. The MCSA 2012 provides an excellent international forum for sharing knowledge and results in theory, methodology and applications of modern computer science and applications in theoretical and practical aspects.

  15. Some gender issues in educational computer use: results of an international comparative survey

    NARCIS (Netherlands)

    Janssen Reinen, Ingeborg; Plomp, Tjeerd

    1993-01-01

    In the framework of the Computers in Education international study of the International Association for the Evaluation of Educational Achievement (IEA), data have been collected concerning the use of computers in 21 countries. This article examines some results regarding the involvement of women in

  16. CIFAC '92: First International Symposium on Computers in Furniture and Cabinet

    Science.gov (United States)

    Janice K. Wiedenbeck

    1992-01-01

    (Book Review) The First International Symposium on Computers in Furniture and Cabinet Manufacturing was sponsored by the Wood Machining Institute in cooperation with Furniture Design and Manufacturing Magazine. The symposium was designed to ãprovide an international forum for the exchange of the latest information on the use of computers in furniture and cabinet...

  17. Evaluating the Implementation of International Computing Curricular in African Universities: A Design-Reality Gap Approach

    Science.gov (United States)

    Dasuki, Salihu Ibrahim; Ogedebe, Peter; Kanya, Rislana Abdulazeez; Ndume, Hauwa; Makinde, Julius

    2015-01-01

    Efforts are been made by Universities in developing countries to ensure that it's graduate are not left behind in the competitive global information society; thus have adopted international computing curricular for their computing degree programs. However, adopting these international curricula seem to be very challenging for developing countries…

  18. Optical Waveguide Switches Employing Total-Internal-Reflection (TIR) Effect (Invited Paper)

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    In this paper, our recent research work on the total-internal-reflection optical switch is presented. The thermo-optic effect of polymeric materials and the photon-induced carrier effect of GaAlAs/GaAs are used in our devices.

  19. International Conference on Computer Science and Information Technologies

    CERN Document Server

    2017-01-01

    The book reports on new theories and applications in the field of intelligent systems and computing. It covers computational and artificial intelligence methods, as well as advances in computer vision, current issue in big data and cloud computing, computation linguistics, cyber-physical systems as well as topics in intelligent information management. Written by active researchers, the different chapters are based on contributions presented at the workshop in intelligent systems and computing (ISC), held during CSIT 2016, September 6-9, and jointly organized by the Lviv Polytechnic National University, Ukraine, the Kharkiv National University of RadioElectronics, Ukraine, and the Technical University of Lodz, Poland, under patronage of Ministry of Education and Science of Ukraine. All in all, the book provides academics and professionals with extensive information and a timely snapshot of the field of intelligent systems, and it is expected to foster new discussions and collaborations among different groups. ...

  20. 2012 International Conference on Human-centric Computing

    CERN Document Server

    Jin, Qun; Yeo, Martin; Hu, Bin; Human Centric Technology and Service in Smart Space, HumanCom 2012

    2012-01-01

    The theme of HumanCom is focused on the various aspects of human-centric computing for advances in computer science and its applications and provides an opportunity for academic and industry professionals to discuss the latest issues and progress in the area of human-centric computing. In addition, the conference will publish high quality papers which are closely related to the various theories and practical applications in human-centric computing. Furthermore, we expect that the conference and its publications will be a trigger for further related research and technology improvements in this important subject.

  1. Computer simulation of diffractive optical element (DOE) performance

    Science.gov (United States)

    Delacour, Jacques F.; Venturino, Jean-Claude; Gouedard, Yannick

    2004-02-01

    Diffractive optical elements (DOE), also known as computer generated holograms (CGH), can transform an illuminating laser beam into a specified intensity distribution by diffraction rather than refraction or reflection. These are widely used in coherent light systems with beam shaping purposes, as an alignment tool or as a structured light generator. The diffractive surface is split into an array of sub-wavelength depth cells. Each of these locally transforms the beam by phase adaptation. Based on the work of the LSP lab from the University of Strasbourg, France, we have developed a unique industry-oriented tool. It allows the user first to optimize a DOE using the Gerchberg-Saxton algorithm. This part can manage sources from the simple plane wave to high order Gaussian modes or complex maps defined beams and objective patterns based on BMP images. A simulation part permits then to test the performance of the DOE with regard to system parameters, dealing with the beam, the DOE itself and the system organization. This will meet the needs of people concerned by tolerancing issues. Focusing on the industrial problem of beam shaping, we will present the whole DOE design sequence, starting from the generation of a DOE up to the study of the sensitivity of its performance according to the variation of several parameters of the system. For example, we will show the influence of the position of the beam on diffraction efficiency. This unique feature formerly neglected in industrial design process will lead the way to production quality improvement.

  2. International Computer Conferencing for Professional Development: The Bangkok Project.

    Science.gov (United States)

    Anderson, Terry; Mason, Robin

    1993-01-01

    Describes the Bangkok Project, a successful application of electronic mail and computer conferencing networks to support professional development in the field of distance education. The development of the computer conference to supplement a face-to-face conference in Bangkok is explained, and conference format and nature of interactions are…

  3. Advances in Computer Science, Engineering & Applications : Proceedings of the Second International Conference on Computer Science, Engineering & Applications

    CERN Document Server

    Zizka, Jan; Nagamalai, Dhinaharan

    2012-01-01

    The International conference series on Computer Science, Engineering & Applications (ICCSEA) aims to bring together researchers and practitioners from academia and industry to focus on understanding computer science, engineering and applications and to establish new collaborations in these areas. The Second International Conference on Computer Science, Engineering & Applications (ICCSEA-2012), held in Delhi, India, during May 25-27, 2012 attracted many local and international delegates, presenting a balanced mixture of  intellect and research both from the East and from the West. Upon a strenuous peer-review process the best submissions were selected leading to an exciting, rich and a high quality technical conference program, which featured high-impact presentations in the latest developments of various areas of computer science, engineering and applications research.  

  4. Advances in Computer Science, Engineering & Applications : Proceedings of the Second International Conference on Computer Science, Engineering & Applications

    CERN Document Server

    Zizka, Jan; Nagamalai, Dhinaharan

    2012-01-01

    The International conference series on Computer Science, Engineering & Applications (ICCSEA) aims to bring together researchers and practitioners from academia and industry to focus on understanding computer science, engineering and applications and to establish new collaborations in these areas. The Second International Conference on Computer Science, Engineering & Applications (ICCSEA-2012), held in Delhi, India, during May 25-27, 2012 attracted many local and international delegates, presenting a balanced mixture of  intellect and research both from the East and from the West. Upon a strenuous peer-review process the best submissions were selected leading to an exciting, rich and a high quality technical conference program, which featured high-impact presentations in the latest developments of various areas of computer science, engineering and applications research.

  5. Advances in Computing and Information Technology : Proceedings of the Second International

    CERN Document Server

    Nagamalai, Dhinaharan; Chaki, Nabendu

    2012-01-01

    The international conference on Advances in Computing and Information technology (ACITY 2012) provides an excellent international forum for both academics and professionals for sharing knowledge and results in theory, methodology and applications of Computer Science and Information Technology. The Second International Conference on Advances in Computing and Information technology (ACITY 2012), held in Chennai, India, during July 13-15, 2012, covered a number of topics in all major fields of Computer Science and Information Technology including: networking and communications, network security and applications, web and internet computing, ubiquitous computing, algorithms, bioinformatics, digital image processing and pattern recognition, artificial intelligence, soft computing and applications. Upon a strength review process, a number of high-quality, presenting not only innovative ideas but also a founded evaluation and a strong argumentation of the same, were selected and collected in the present proceedings, ...

  6. Internal fingerprint zone detection in optical coherence tomography fingertip scans

    CSIR Research Space (South Africa)

    Darlow, LN

    2015-04-01

    Full Text Available Optical coherence tomography (OCT) is a high-resolution imaging technology capable of capturing a three-dimensional (3-D) representation of fingertip skin. The papillary junction—a junction layer of skin containing the same topographical features...

  7. Internal field induced exciton binding energy and the optical transition in a strained Mg based II–VI quantum well

    Energy Technology Data Exchange (ETDEWEB)

    Elangovan, P. [Department of Physics, Maamallan Institute of Technology, Chennai 602105 (India); John Peter, A., E-mail: a.john.peter@gmail.com [Department of Physics, Government Arts College, Melur 625 106. Madurai (India); Kyoo Yoo, Chang [Center for Environmental Studies/Green Energy Center, Deptartment of Environmental Science and Engineering, College of Engineering, Kyung Hee University, Seocheon-dong 1, Giheung-gu, Yongin-Si, Gyeonggi-Do, 446-701 (Korea, Republic of)

    2013-11-15

    Binding energy of an exciton in a wurtzite ZnO/Zn{sub 1−x}Mg{sub x}O strained quantum well is investigated theoretically in which the strong built-in electric field due to the spontaneous and piezoelectric polarizations is included. Numerical calculations are performed using variational procedure within the single band effective mass approximation by varying the Mg composition in the barrier. The exciton oscillator strength and the exciton lifetime for radiative recombination as functions of well width and Mg content have been computed. The internal field induced interband emission energy of strained ZnO/Zn{sub 1−x}Mg{sub x}O well is investigated with the various structural parameters. The total optical absorption coefficients and the changes of refractive index as a function of normalized photon energy in the presence of built-in internal field are analyzed. The result shows that the strong built-in electric field has influence on the oscillator strength and the recombination life time of the exciton. The optical absorption coefficients and the refractive index changes strongly depend on Mg composition. The occurred blue shift of the resonant peak due to the incorporation of Mg ions will give the information about the variation of two energy levels in the quantum well. -- Highlights: • Binding energy of an exciton in a wurtzite ZnO/Zn{sub 1−x}Mg{sub x}O strained quantum well is investigated. • The built-in internal fields due to the spontaneous and piezoelectric polarizations are included. • The oscillator strength and the exciton lifetime for radiative recombination are computed. • The internal field induced transition energy of strained ZnO/Zn{sub 1−x}Mg{sub x}O well is investigated. • The results show that the nonlinear optical properties strongly depend on Mg composition.

  8. No-go theorem for passive single-rail linear optical quantum computing.

    Science.gov (United States)

    Wu, Lian-Ao; Walther, Philip; Lidar, Daniel A

    2013-01-01

    Photonic quantum systems are among the most promising architectures for quantum computers. It is well known that for dual-rail photons effective non-linearities and near-deterministic non-trivial two-qubit gates can be achieved via the measurement process and by introducing ancillary photons. While in principle this opens a legitimate path to scalable linear optical quantum computing, the technical requirements are still very challenging and thus other optical encodings are being actively investigated. One of the alternatives is to use single-rail encoded photons, where entangled states can be deterministically generated. Here we prove that even for such systems universal optical quantum computing using only passive optical elements such as beam splitters and phase shifters is not possible. This no-go theorem proves that photon bunching cannot be passively suppressed even when extra ancilla modes and arbitrary number of photons are used. Our result provides useful guidance for the design of optical quantum computers.

  9. 5th International Conference on Fuzzy and Neuro Computing

    CERN Document Server

    Panigrahi, Bijaya; Das, Swagatam; Suganthan, Ponnuthurai

    2015-01-01

    This proceedings bring together contributions from researchers from academia and industry to report the latest cutting edge research made in the areas of Fuzzy Computing, Neuro Computing and hybrid Neuro-Fuzzy Computing in the paradigm of Soft Computing. The FANCCO 2015 conference explored new application areas, design novel hybrid algorithms for solving different real world application problems. After a rigorous review of the 68 submissions from all over the world, the referees panel selected 27 papers to be presented at the Conference. The accepted papers have a good, balanced mix of theory and applications. The techniques ranged from fuzzy neural networks, decision trees, spiking neural networks, self organizing feature map, support vector regression, adaptive neuro fuzzy inference system, extreme learning machine, fuzzy multi criteria decision making, machine learning, web usage mining, Takagi-Sugeno Inference system, extended Kalman filter, Goedel type logic, fuzzy formal concept analysis, biclustering e...

  10. 8th International Conference on Computer Recognition Systems

    CERN Document Server

    Jackowski, Konrad; Kurzynski, Marek; Wozniak, Michał; Zolnierek, Andrzej

    2013-01-01

    The computer recognition systems are nowadays one of the most promising directions in artificial intelligence. This book is the most comprehensive study of this field. It contains a collection of 86 carefully selected articles contributed by experts of pattern recognition. It reports on current research with respect to both methodology and applications. In particular, it includes the following sections: Biometrics Data Stream Classification and Big Data Analytics  Features, learning, and classifiers Image processing and computer vision Medical applications Miscellaneous applications Pattern recognition and image processing in robotics  Speech and word recognition This book is a great reference tool for scientists who deal with the problems of designing computer pattern recognition systems. Its target readers can be the as well researchers as students of computer science, artificial intelligence or robotics.

  11. 2nd International Conference on Mathematics and Computing

    CERN Document Server

    Chowdhury, Dipanwita; Giri, Debasis

    2015-01-01

    This book discusses recent developments and contemporary research in mathematics, statistics and their applications in computing. All contributing authors are eminent academicians, scientists, researchers and scholars in their respective fields, hailing from around the world. This is the second conference on mathematics and computing organized at Haldia Institute of Technology, India. The conference has emerged as a powerful forum, offering researchers a venue to discuss, interact and collaborate, and stimulating the advancement of mathematics and its applications in computer science. The book will allow aspiring researchers to update their knowledge of cryptography, algebra, frame theory, optimizations, stochastic processes, compressive sensing, functional analysis, complex variables, etc. Educating future consumers, users, producers, developers and researchers in mathematics and computing is a challenging task and essential to the development of modern society. Hence, mathematics and its applications in com...

  12. 9th International Conference on Computer Recognition Systems

    CERN Document Server

    Jackowski, Konrad; Kurzyński, Marek; Woźniak, Michał; Żołnierek, Andrzej

    2016-01-01

    The computer recognition systems are nowadays one of the most promising directions in artificial intelligence. This book is the most comprehensive study of this field. It contains a collection of 79 carefully selected articles contributed by experts of pattern recognition. It reports on current research with respect to both methodology and applications. In particular, it includes the following sections: Features, learning, and classifiers Biometrics Data Stream Classification and Big Data Analytics Image processing and computer vision Medical applications Applications RGB-D perception: recent developments and applications This book is a great reference tool for scientists who deal with the problems of designing computer pattern recognition systems. Its target readers can be the as well researchers as students of computer science, artificial intelligence or robotics.  .

  13. Predictors of incomplete optical colonoscopy using computed tomographic colonography

    Directory of Open Access Journals (Sweden)

    Reetika Sachdeva

    2016-01-01

    Full Text Available Background/Aims: Optical colonoscopy (OC is the primary modality for investigation of colonic pathology. Although there is data on demographic factors for incomplete OC, paucity of data exists for anatomic variables that are associated with an incomplete OC. These anatomic variables can be visualized using computed tomographic colonography (CTC. We aim to retrospectively identify variables associated with incomplete OC using CTC and develop a scoring method to predict the outcome of OC. Patients and Methods: In this case-control study, 70 cases ( with incomplete OC and 70 controls (with complete OC were identified. CTC images of cases and controls were independently reviewed by a single CTC radiologist. Demographic and anatomical parameters were recorded. Data was examined using descriptive linear statistics and multivariate logistic regression model. Results: On analysis, female gender (80% vs 58.6% P = 0.007, prior abdominal/pelvic surgeries (51.4% vs 14.3% P < 0.001, colonic length (187.6 ± 30.0 cm vs 163.8 ± 27.2 cm P < 0.001, and number of flexures (11.4 ± 3.1 vs 8.4 ± 2.9 P < 0.001 increased the risk for incomplete OC. No significant association was observed for increasing age (P = 0.881 and history of severe diverticulosis (P = 0.867 with incomplete OC. A scoring system to predict the outcome of OC is proposed based on CTC findings. Conclusion: Female gender, prior surgery, and increasing colonic length and tortuosity were associated with incomplete OC, whereas increasing age and history of severe diverticulosis were not. These factors may be used in the future to predict those patients who are at risk of incomplete OC.

  14. Advanced Modulation Techniques for High-Performance Computing Optical Interconnects

    DEFF Research Database (Denmark)

    Karinou, Fotini; Borkowski, Robert; Zibar, Darko

    2013-01-01

    We experimentally assess the performance of a 64 × 64 optical switch fabric used for ns-speed optical cell switching in supercomputer optical interconnects. More specifically, we study four alternative modulation formats and detection schemes, namely, 10-Gb/s nonreturn-to-zero differential phase......-shift keying with balanced direct detection, 10-Gb/s polarization division multiplexed (PDM) quadrature phase-shift keying, 40-Gb/s single-polarization 16-ary quadrature amplitude modulation (16QAM), and 80-Gb/s PDM-16QAM, with coherent intradyne detection, in conjunction with an optimized version...... of the optical shared memory supercomputer interconnect system switch fabric. In particular, we investigate the resilience of the aforementioned advanced modulation formats to the nonlinearities of semiconductor optical amplifiers, used as ON/OFF gates in the supercomputer optical switch fabric under study...

  15. 7th International Conference on Bio-Inspired Computing : Theories and Applications

    CERN Document Server

    Singh, Pramod; Deep, Kusum; Pant, Millie; Nagar, Atulya

    2013-01-01

    The book is a collection of high quality peer reviewed research papers presented in Seventh International Conference on Bio-Inspired Computing (BIC-TA 2012) held at ABV-IIITM Gwalior, India. These research papers provide the latest developments in the broad area of "Computational Intelligence". The book discusses wide variety of industrial, engineering and scientific applications of nature/bio-inspired computing and presents invited papers from the inventors/originators of novel computational techniques.

  16. Quantum Computations with Transverse Modes of an Optical Field Propagating in Waveguides

    Institute of Scientific and Technical Information of China (English)

    符建; 唐少芳

    2003-01-01

    A fully optical method to perform quantum computation with transverse modes of the optical field propagating in waveguide is proposed by supplying the prescriptions for a universal set of quantum gates. The proposal for quantum computation is based on implementing a quantum bit with two normal modes of multi-mode waveguides. The proposed C-NOT gate has the potential of being more compact and easily realized than some optical implementations, since it is based on planar lightwave circuit technology and can be constructed by using Mach-Zehnder interferometer having semiconductor optical amplifiers with very large refractive nonlinearity in its arms.

  17. Effect of aggregation, morphology and mixing state on optical properties of bare and internally mixed Black Carbon particles

    Science.gov (United States)

    Scarnato, Barbara; China, Swarup; Mazzoleni, Claudio

    2014-05-01

    Black carbon (BC) is a small, dark particle that warms Earth's climate. BC is a distinct type of carbonaceous aerosol particle, product of combustion of fossil and biomass fuels. Upon emission into the atmosphere, BC internally mixes with other aerosol compounds. According to recent studies, internal mixing of BC with other aerosol materials in the atmosphere alters its aggregate shape, absorption of solar radiation, and radiative forcing. These mixing state effects are not yet fully understood. Laboratory and field studies have identified a strong variability in the observed absorption efficiencies of internally mixed BC. Additionally, there is a discrepancy between modeled and measured values using traditional modeling approaches. This talk will investigate the central role of parameterization of light interaction by BC particles in the assessment of its radiative forcing and present a sensitivity study of the effect of aggregation, morphology and mixing state on optical properties of bare and internally mixed BC with mineral dust, ammonium sulfate, sodium chloride and others. Optical properties of the different mixtures, sampled both in field campaigns and laboratory environment, are computed using Discrete Dipole Approximation model in accordance with BC aggregation, morphology and mixing observed at microscopes. The results of this work are relevant for several applications in atmospheric science, including but not limited to radiative transfer calculations, regional and global climate modeling and, the interpretation of remote sensing measurements.

  18. Proceedings Third International Workshop on Classical Logic and Computation

    CERN Document Server

    van Bakel, Steffen; Berger, Ulrich; 10.4204/EPTCS.47

    2011-01-01

    The fact that classical mathematical proofs of simply existential statements can be read as programs was established by Goedel and Kreisel half a century ago. But the possibility of extracting useful computational content from classical proofs was taken seriously only from the 1990s on when it was discovered that proof interpretations based on Goedel's and Kreisel's ideas can provide new nontrivial algorithms and numerical results, and the Curry-Howard correspondence can be extended to classical logic via programming concepts such as continuations and control operators. The workshop series "Classical Logic and Computation" aims to support a fruitful exchange of ideas between the various lines of research on computational aspects of classical logic. This volume contains the abstracts of the invited lectures and the accepted contributed papers of the third CL&C workshop which was held jointly with the workshop "Program Extraction and Constructive Mathematics" at the University of Brno in August 21-22, 2010,...

  19. 1st International Conference on Computational Intelligence in Data Mining

    CERN Document Server

    Behera, Himansu; Mandal, Jyotsna; Mohapatra, Durga

    2015-01-01

    The contributed volume aims to explicate and address the difficulties and challenges for the seamless integration of two core disciplines of computer science, i.e., computational intelligence and data mining. Data Mining aims at the automatic discovery of underlying non-trivial knowledge from datasets by applying intelligent analysis techniques. The interest in this research area has experienced a considerable growth in the last years due to two key factors: (a) knowledge hidden in organizations’ databases can be exploited to improve strategic and managerial decision-making; (b) the large volume of data managed by organizations makes it impossible to carry out a manual analysis. The book addresses different methods and techniques of integration for enhancing the overall goal of data mining. The book helps to disseminate the knowledge about some innovative, active research directions in the field of data mining, machine and computational intelligence, along with some current issues and applications of relate...

  20. Internal Strain Measurement in 3D Braided Composites Using Co-braided Optical Fiber Sensors

    Institute of Scientific and Technical Information of China (English)

    Shenfang YUAN; Rui HUANG; Yunjiang RAO

    2004-01-01

    3D braided composite technology has stimulated a great deal of interest in the world at large. But due to the threedimensional nature of these kinds of composites, coupled with the shortcomings of currently-adopted experimental test methods, it is difficult to measure the internal parameters of this materials, hence causes it difficult to understand the material performance. A new method is introduced herein to measure the internal strain of braided composite materials using co-braided fiber optic sensors. Two kinds of fiber optic sensors are co-braided into 3D braided composites to measure internal strain. One of these is the Fabry-Parrot (F-P) fiber optic sensor; the other is the polarimetric fiber optic sensor. Experiments are conducted to measure internal strain under tension, bending and thermal environments in the 3D carbon fiber braided composite specimens, both locally and globally. Experimental results show that multiple fiber optic sensors can be braided into the 3D braided composites to measure the internal parameters, providing a more accurate measurement method and leading to a better understanding of these materials.

  1. INIS: A Computer-Based International Nuclear Information System.

    Science.gov (United States)

    Balakrishnan, M. R.

    1986-01-01

    Description of the International Nuclear Information System includes its history, organizational structure, subject classification scheme, thesaurus, input standards, and various products and services generated by the system. Appendices provide a list of participating countries, subjects covered by the system, and a sample output record.…

  2. Computer simulation study International Container Terminal "Tanjung Perak", Surabaya, Indonesia

    NARCIS (Netherlands)

    Groenveld, R.; Wanders, S.

    1998-01-01

    The Tanjung Perak harbour of the city of Surabaya on the island Java, Indonesia has experienced a considerable growth of container traffic. In order to adequately deal with the expected continuing increase of container traffic in the future, the International container terminal is presently being ex

  3. Ninth international conference on computational linguistics Coling 82

    Energy Technology Data Exchange (ETDEWEB)

    1983-01-01

    This paper presents the summary reports presented at the concluding session and evaluating the state of the art, trends and perspectives as reflected in the papers presented at Coling 82 in six domains: machine translation, grammatico-semantic analysis, linguistics in its relations to computational linguistics, question answering, artificial intelligence and knowledge representation, and information retrieval and linguistic data bases.

  4. International Conference on Numerical Grid Generation in Computational Fluid Dynamics

    Science.gov (United States)

    1989-04-30

    Grun Convex Computer Corporation Brunnenstr. 17 701 Piano Road 8049 Bachenhausen Richardson Germany TX 75081 Chunyuan Gu J. E.Holcomb Dept. of Gas...Lab System Dynamics Inc. L-95, PO Box 808 1211 N.W. 10th Avenue Livermore, CA 94550 Gainesville FL 32601 Bernadette Palmero Azine Renzo Universite de

  5. DETERMINATION OF INTERNAL STRAIN IN 3-D BRAIDED COMPOSITES USING OPTIC FIBER STRAIN SENSORS

    Institute of Scientific and Technical Information of China (English)

    YuanShenfang; HuangRui; LiXianghua; LiuXiaohui

    2004-01-01

    A reliable understanding of the properties of 3-D braided composites is of primary importance for proper utilization of these materials. A new method is introduced to study the mechanical performance of braided composite materials using embedded optic fiber sensors. Experimental research is performed to devise a method of incorporating optic fibers into a 3-D braided composite structure. The efficacy of this new testing method is evaluated on two counts. First,the optical performance of optic fibers is studied before and after incorporated into 3-D braided composites, as well as after completion of the manufacturing process for 3-D braided composites,to validate the ability of the optic fiber to survive the manufacturing process. On the other hand,the influence of incorporated optic fiber on the original braided composite is also researched by tension and compression experiments. Second, two kinds of optic fiber sensors are co-embedded into 3-D braided composites to evaluate their respective ability to measure the internal strain.Experimental results show that multiple optic fiber sensors can be co-braided into 3-D braided composites to determine their internal strain which is difficult to be fulfilled by other current existing methods.

  6. Computer assistance in the practice of internal medicine.

    Science.gov (United States)

    Niermeijer, P

    1995-05-01

    An overview is given of the possibilities of electronic support in the practice of internal medicine and of the preferred electronic environment in the hospital. For efficient exchange of information, mutual cooperation between all departments and medical specialists in the hospital is of great importance. The development of a sufficient hospital information system has to start with the composition of an information design, based on the concept of an open hospital database with connections to subsystems of the different departments and medical specialisms. Within this design basic, organizational, management and (medical) knowledge-providing programs can be applied. General, medical, scientific and organizational aspects of electronic support in internal medicine are discussed with some practical examples. A brief comment is made on the necessity of using code numbers for diagnoses.

  7. New £30M funding for british part of international computer grid Powerful international federation of computers moves into the next phase.

    CERN Multimedia

    Reeves, Danielle

    2007-01-01

    "The British arm of an international effort to build a computing Grid powerful enough to analyse data from the Large Hadron Collider (LHC) particle accelerator at CERN has been awarded GBP 30 million new funding, it was announced last week." (1 page)

  8. Computing the laser beam path in optical cavities: a geometric Newton's method based approach

    CERN Document Server

    Cuccato, Davide; Ortolan, Antonello; Beghi, Alessandro

    2015-01-01

    In the last decade, increasing attention has been drawn to high precision optical experiments, which push resolution and accuracy of the measured quantities beyond their current limits. This challenge requires to place optical elements (e.g. mirrors, lenses, etc.) and to steer light beams with sub-nanometer precision. Existing methods for beam direction computing in resonators, e.g. iterative ray tracing or generalized ray transfer matrices, are either computationally expensive or rely on overparametrized models of optical elements. By exploiting Fermat's principle, we develop a novel method to compute the steady-state beam configurations in resonant optical cavities formed by spherical mirrors, as a function of mirror positions and curvature radii. The proposed procedure is based on the geometric Newton method on matrix manifold, a tool with second order convergence rate that relies on a second order model of the cavity optical length. As we avoid coordinates to parametrize the beam position on mirror surfac...

  9. 21st International Conference on DNA Computing and Molecular Programming

    Science.gov (United States)

    2016-05-24

    made. Printed on acid-free paper Springer International Publishing AG Switzerland is part of Springer Science+Business Media (www.springer.com...increasing K . Using Z3 ’s theory of linear integer arithmetic , we represent the stoichiom- etry of C as two symbolic matrices r E N~xN and p E N~x N...express var- 30 N. Dalchau et al. ious logical and arithmetic functions and operations. More general specifications, for example where intermediate

  10. A Simple Technique to Facilitate Treatment of Urethral Strictures with Optical Internal Urethrotomy

    Directory of Open Access Journals (Sweden)

    Konstantinos Stamatiou

    2014-01-01

    Full Text Available Urethral stricture is a common condition that can lead to serious complications such as urinary infections and renal insufficiency secondary to urinary retention. Treatment options include catheterization, urethroplasty, endoscopic internal urethrotomy, and dilation. Optical internal urethrotomy offers faster recovery, minimal scarring, and less risk of infection, although recurrence is possible. However, technical difficulties associated with poor visualization of the stenosis or of the urethral lumen may increase procedural time and substantially increase the failure rates of internal urethrotomy. In this report we describe a technique for urethral catheterization via a suprapubic, percutaneous approach through the urinary bladder in order to facilitate endoscopic internal urethrotomy.

  11. International Conference on Soft Computing in Information Communication Technology

    CERN Document Server

    Soft Computing in Information Communication Technology

    2012-01-01

      This is a collection of the accepted papers concerning soft computing in information communication technology. All accepted papers are subjected to strict peer-reviewing by 2 expert referees. The resultant dissemination of the latest research results, and the exchanges of views concerning the future research directions to be taken in this field makes the work of immense value to all those having an interest in the topics covered. The present book represents a cooperative effort to seek out the best strategies for effecting improvements in the quality and the reliability of Neural Networks, Swarm Intelligence, Evolutionary Computing, Image Processing Internet Security, Data Security, Data Mining, Network Security and Protection of data and Cyber laws. Our sincere appreciation and thanks go to these authors for their contributions to this conference. I hope you can gain lots of useful information from the book.

  12. International Conference on Soft Computing Techniques and Engineering Application

    CERN Document Server

    Li, Xiaolong

    2014-01-01

    The main objective of ICSCTEA 2013 is to provide a platform for researchers, engineers and academicians from all over the world to present their research results and development activities in soft computing techniques and engineering application. This conference provides opportunities for them to exchange new ideas and application experiences face to face, to establish business or research relations and to find global partners for future collaboration.

  13. 10th International Conference on Soft Computing Models in Industrial and Environmental Applications

    CERN Document Server

    Sedano, Javier; Baruque, Bruno; Quintián, Héctor; Corchado, Emilio

    2015-01-01

    This volume of Advances in Intelligent and Soft Computing contains accepted papers presented at the 10th International Conference on Soft Computing Models in Industrial and Environmental Applications (SOCO 2015), held in the beautiful and historic city of Burgos (Spain), in June 2015. Soft computing represents a collection or set of computational techniques in machine learning, computer science and some engineering disciplines, which investigate, simulate, and analyze very complex issues and phenomena. This Conference is mainly focused on its industrial and environmental applications. After a through peer-review process, the SOCO 2015 International Program Committee selected 41 papers, written by authors from 15 different countries. These papers are published in present conference proceedings, achieving an acceptance rate of 40%. The selection of papers was extremely rigorous in order to maintain the high quality of the conference and we would like to thank the members of the International Program Committees ...

  14. 9th International Conference on Practical Applications of Computational Biology and Bioinformatics

    CERN Document Server

    Rocha, Miguel; Fdez-Riverola, Florentino; Paz, Juan

    2015-01-01

    This proceedings presents recent practical applications of Computational Biology and  Bioinformatics. It contains the proceedings of the 9th International Conference on Practical Applications of Computational Biology & Bioinformatics held at University of Salamanca, Spain, at June 3rd-5th, 2015. The International Conference on Practical Applications of Computational Biology & Bioinformatics (PACBB) is an annual international meeting dedicated to emerging and challenging applied research in Bioinformatics and Computational Biology. Biological and biomedical research are increasingly driven by experimental techniques that challenge our ability to analyse, process and extract meaningful knowledge from the underlying data. The impressive capabilities of next generation sequencing technologies, together with novel and ever evolving distinct types of omics data technologies, have put an increasingly complex set of challenges for the growing fields of Bioinformatics and Computational Biology. The analysis o...

  15. International conference on Advances in Intelligent Control and Innovative Computing

    CERN Document Server

    Castillo, Oscar; Huang, Xu; Intelligent Control and Innovative Computing

    2012-01-01

    In the lightning-fast world of intelligent control and cutting-edge computing, it is vitally important to stay abreast of developments that seem to follow each other without pause. This publication features the very latest and some of the very best current research in the field, with 32 revised and extended research articles written by prominent researchers in the field. Culled from contributions to the key 2011 conference Advances in Intelligent Control and Innovative Computing, held in Hong Kong, the articles deal with a wealth of relevant topics, from the most recent work in artificial intelligence and decision-supporting systems, to automated planning, modelling and simulation, signal processing, and industrial applications. Not only does this work communicate the current state of the art in intelligent control and innovative computing, it is also an illuminating guide to up-to-date topics for researchers and graduate students in the field. The quality of the contents is absolutely assured by the high pro...

  16. 2nd International Conference on Soft Computing and Data Mining

    CERN Document Server

    Ghazali, Rozaida; Nawi, Nazri; Deris, Mustafa

    2017-01-01

    This book provides a comprehensive introduction and practical look at the concepts and techniques readers need to get the most out of their data in real-world, large-scale data mining projects. It also guides readers through the data-analytic thinking necessary for extracting useful knowledge and business value from the data. The book is based on the Soft Computing and Data Mining (SCDM-16) conference, which was held in Bandung, Indonesia on August 18th–20th 2016 to discuss the state of the art in soft computing techniques, and offer participants sufficient knowledge to tackle a wide range of complex systems. The scope of the conference is reflected in the book, which presents a balance of soft computing techniques and data mining approaches. The two constituents are introduced to the reader systematically and brought together using different combinations of applications and practices. It offers engineers, data analysts, practitioners, scientists and managers the insights into the concepts, tools and techni...

  17. A scheme of optical interconnection for super high speed parallel computer

    Institute of Scientific and Technical Information of China (English)

    Youju Mao(毛幼菊); Yi L(u)(吕翊); Jiang Liu(刘江); Mingrui Dang(党明瑞)

    2004-01-01

    An optical cross connection network which adopts coarse wavelength division multiplexing (CWDM) and data packet is introduced. It can be used to realize communication between multi-CPU and multi-MEM in parallel computing system. It provides an effective way to upgrade the capability of parallel computer by combining optical wavelength division multiplexing (WDM) and data packet switching technology. CWDM used in network construction, optical cross connection (OXC) based on optical switch arrays, and data packet format used in network construction were analyzed. We have also done the optimizing analysis of the number of optical switches needed in different scales of network in this paper. The architecture of the optical interconnection for 8 wavelength channels and 128 bits parallel transmission has been researched. Finally, a parallel transmission system with 4 nodes, 8 channels per node, has been designed.

  18. Computation and validation of two-dimensional PSF simulation based on physical optics

    CERN Document Server

    Tayabaly, K; Sironi, G; Canestrari, R; Lavagna, M; Pareschi, G

    2016-01-01

    The Point Spread Function (PSF) is a key figure of merit for specifying the angular resolution of optical systems and, as the demand for higher and higher angular resolution increases, the problem of surface finishing must be taken seriously even in optical telescopes. From the optical design of the instrument, reliable ray-tracing routines allow computing and display of the PSF based on geometrical optics. However, such an approach does not directly account for the scattering caused by surface microroughness, which is interferential in nature. Although the scattering effect can be separately modeled, its inclusion in the ray-tracing routine requires assumptions that are difficult to verify. In that context, a purely physical optics approach is more appropriate as it remains valid regardless of the shape and size of the defects appearing on the optical surface. Such a computation, when performed in two-dimensional consideration, is memory and time consuming because it requires one to process a surface map wit...

  19. A computer code for beam optics calculation--third order approximation

    Institute of Scientific and Technical Information of China (English)

    L(U) Jianqin; LI Jinhai

    2006-01-01

    To calculate the beam transport in the ion optical systems accurately, a beam dynamics computer program of third order approximation is developed. Many conventional optical elements are incorporated in the program. Particle distributions of uniform type or Gaussian type in the ( x, y, z ) 3D ellipses can be selected by the users. The optimization procedures are provided to make the calculations reasonable and fast. The calculated results can be graphically displayed on the computer monitor.

  20. Proceedings of the 2011 2nd International Congress on Computer Applications and Computational Science

    CERN Document Server

    Nguyen, Quang

    2012-01-01

    The latest inventions in computer technology influence most of human daily activities. In the near future, there is tendency that all of aspect of human life will be dependent on computer applications. In manufacturing, robotics and automation have become vital for high quality products. In education, the model of teaching and learning is focusing more on electronic media than traditional ones. Issues related to energy savings and environment is becoming critical.   Computational Science should enhance the quality of human life,  not only solve their problems. Computational Science should help humans to make wise decisions by presenting choices and their possible consequences. Computational Science should help us make sense of observations, understand natural language, plan and reason with extensive background knowledge. Intelligence with wisdom is perhaps an ultimate goal for human-oriented science.   This book is a compilation of some recent research findings in computer application and computational sci...

  1. Proceedings of the 2011 2nd International Congress on Computer Applications and Computational Science

    CERN Document Server

    Nguyen, Quang

    2012-01-01

    The latest inventions in computer technology influence most of human daily activities. In the near future, there is tendency that all of aspect of human life will be dependent on computer applications. In manufacturing, robotics and automation have become vital for high quality products. In education, the model of teaching and learning is focusing more on electronic media than traditional ones. Issues related to energy savings and environment is becoming critical.   Computational Science should enhance the quality of human life,  not only solve their problems. Computational Science should help humans to make wise decisions by presenting choices and their possible consequences. Computational Science should help us make sense of observations, understand natural language, plan and reason with extensive background knowledge. Intelligence with wisdom is perhaps an ultimate goal for human-oriented science.   This book is a compilation of some recent research findings in computer application and computational sci...

  2. Computational hybrid anthropometric paediatric phantom library for internal radiation dosimetry

    DEFF Research Database (Denmark)

    Xie, Tianwu; Kuster, Niels; Zaidi, Habib

    2017-01-01

    covering statistical distributions of body morphometry in the paediatric population. The paediatric phantoms of the Virtual Population Series (IT'IS Foundation, Switzerland) were modified to match target anthropometric parameters, including body mass, body length, standing height and sitting height...... to create 1100 female and male phantoms with 10th, 25th, 50th, 75th and 90th body morphometries. Evaluation was performed qualitatively using 3D visualization and quantitatively by analysing internal organ masses. Overall, the newly generated phantoms appear very reasonable and representative of the main...

  3. Time-Gated Optical Projection Tomography Allows Visualization of Adult Zebrafish Internal Structures

    Science.gov (United States)

    Foglia, Efrem Alessandro; Pistocchi, Anna; D'Andrea, Cosimo; Valentini, Gianluca; Cubeddu, Rinaldo; De Silvestri, Sandro; Cerullo, Giulio; Cotelli, Franco

    2012-01-01

    Optical imaging through biological samples is compromised by tissue scattering and currently various approaches aim to overcome this limitation. In this paper we demonstrate that an all optical technique, based on non-linear upconversion of infrared ultrashort laser pulses and on multiple view acquisition, allows the reduction of scattering effects in tomographic imaging. This technique, namely Time-Gated Optical Projection Tomography (TGOPT), is used to reconstruct three dimensionally the internal structure of adult zebrafish without staining or clearing agents. This method extends the use of Optical Projection Tomography to optically diffusive samples yielding reconstructions with reduced artifacts, increased contrast and improved resolution with respect to those obtained with non-gated techniques. The paper shows that TGOPT is particularly suited for imaging the skeletal system and nervous structures of adult zebrafish. PMID:23185643

  4. 4th International Workshop on Adaptive Optics for Industry and Medicine

    CERN Document Server

    Wittrock, Ulrich

    2005-01-01

    This book treats the development and application of adaptive optics for industry and medicine. The contributions describe recently developed components for adaptive-optics systems such as deformable mirrors, wavefront sensors, and mirror drivers as well as complete adaptive optical systems and their applications in industry and medicine. Applications range from laser-beam forming and adaptive aberration correction for high-power lasers to retinal imaging in ophthalmology. The contributions are based on presentations made at the 4th International Workshop on Adaptive Optics in Industry and Medicine which took place in Münster, Germany, in October 2003. This highly successful series of workshops on adaptive optics started in 1997 and continues with the 5th workshop in Beijing in 2005.

  5. Optical feedback characteristics in a helium neon laser with a birefringent internal cavity

    Institute of Scientific and Technical Information of China (English)

    Mao Wei; Zhang Shu-Lian; Xu Ting; Wan Xin-Jun; Liu Gang

    2007-01-01

    The output characteristics of optical feedback in a helium-neon laser with a birefringent internal cavity are studied systematically in five different regions of the gain curve for the two orthogonally polarized modes. When the laser operates in the two end regions of the laser gain curve, one of the two orthogonally polarized modes will be a leading one in optical feedback. Strong mode competition can be observed. However, when the laser operates in the middle region of the laser gain curve, the two modes can oscillate equally with optical feedback. Besides the intensity of the two polarized lights, the total light intensity is also studied at the same time. M-shaped optical feedback curves are found. Particularly, when the average intensities of the two lights are comparable, the intensity modulation curve of the total light is doubled, which can be used to improve the resolution of an optical feedback system.

  6. Computer-Assisted Assessment -- Research into E-Assessment. Proceedings of the 17th International Conference on Computer Assisted Assessment

    NARCIS (Netherlands)

    Kalz, Marco; Ras, Eric

    2014-01-01

    This book constitutes the refereed proceedings of the International Conference on Computer Assisted Assessment, CAA 2014, held in Zeist, The Netherlands, in June/July 2014. The 16 revised full papers presented were carefully reviewed and selected from numerous submissions. The papers address issues

  7. Characterization of the International Linear Collider damping ring optics

    CERN Document Server

    Shanks, James; Sagan, David

    2013-01-01

    A method is presented for characterizing the emittance dilution and dynamic aperture for an arbitrary closed lattice that includes guide field magnet errors, multipole errors and misalignments. This method, developed and tested at CesrTA, has been applied to the damping ring lattice for the International Linear Collider (ILC). The effectiveness of beam based emittance tuning is limited by beam position monitor (BPM) measurement errors, disposition of corrector magnets, and tuning algorithm. The specifications for damping ring magnet alignment, multipoles, and number and precision of the BPMs are shown to be consistent with the required emittances and dynamic aperture. Further analysis of the ILC damping ring lattice demonstrates the implications of reducing the number of BPMs and relaxing the constraints on guide field multipoles.

  8. Optical music recognition on the International Music Score Library Project

    Science.gov (United States)

    Raphael, Christopher; Jin, Rong

    2013-12-01

    A system is presented for optical recognition of music scores. The system processes a document page in three main phases. First it performs a hierarchical decomposition of the page, identifying systems, staves and measures. The second phase, which forms the heart of the system, interprets each measure found in the previous phase as a collection of non-overlapping symbols including both primitive symbols (clefs, rests, etc.) with fixed templates, and composite symbols (chords, beamed groups, etc.) constructed through grammatical composition of primitives (note heads, ledger lines, beams, etc.). This phase proceeds by first building separate top-down recognizers for the symbols of interest. Then, it resolves the inevitable overlap between the recognized symbols by exploring the possible assignment of overlapping regions, seeking globally optimal and grammatically consistent explanations. The third phase interprets the recognized symbols in terms of pitch and rhythm, focusing on the main challenge of rhythm. We present results that compare our system to the leading commercial OMR system using MIDI ground truth for piano music.

  9. Computational imaging through a fiber-optic bundle

    Science.gov (United States)

    Lodhi, Muhammad A.; Dumas, John Paul; Pierce, Mark C.; Bajwa, Waheed U.

    2017-05-01

    Compressive sensing (CS) has proven to be a viable method for reconstructing high-resolution signals using low-resolution measurements. Integrating CS principles into an optical system allows for higher-resolution imaging using lower-resolution sensor arrays. In contrast to prior works on CS-based imaging, our focus in this paper is on imaging through fiber-optic bundles, in which manufacturing constraints limit individual fiber spacing to around 2 μm. This limitation essentially renders fiber-optic bundles as low-resolution sensors with relatively few resolvable points per unit area. These fiber bundles are often used in minimally invasive medical instruments for viewing tissue at macro and microscopic levels. While the compact nature and flexibility of fiber bundles allow for excellent tissue access in-vivo, imaging through fiber bundles does not provide the fine details of tissue features that is demanded in some medical situations. Our hypothesis is that adapting existing CS principles to fiber bundle-based optical systems will overcome the resolution limitation inherent in fiber-bundle imaging. In a previous paper we examined the practical challenges involved in implementing a highly parallel version of the single-pixel camera while focusing on synthetic objects. This paper extends the same architecture for fiber-bundle imaging under incoherent illumination and addresses some practical issues associated with imaging physical objects. Additionally, we model the optical non-idealities in the system to get lower modelling errors.

  10. PREFACE: 23rd Congress of the International Commission for Optics (ICO 23)

    Science.gov (United States)

    Salgueiro, J. R.; Flores-Arias, M. T.; Vázquez-Dorrío, J. B.; Guzmán, Á.; Arakawa, Y.

    2015-04-01

    The 23rd Congress of the International Commission for Optics (ICO) was held in Santiago de Compostela (Spain) 26-29 August 2014, organized by the Universities of Vigo and Santiago de Compostela. Approximately 450 people attended the conference, sharing their knowledge in the cheerful, warm atmosphere of this lovely city. The conference was extremely successful in contributing to the mission of the ICO: to contribute worldwide, on an international basis, to the progress and diffusion of scientific and technological knowledge on optics and photonics. Optics and photonics have reached a critical level of importance for the development of our societies and are present in a great many aspects of our technological progress, from communication systems supporting the Internet to the most modern techniques in medicine. Consistent with the conference slogan Enlightening the Future, the meeting stressed the importance of optical science as a key to technological progress in the coming years. UNESCO's designation of 2015 as the International Year of Light and Light-Based Technologies (www.light2015.org) acknowledges the importance of raising global awareness of how light and light-based technologies are present in a large fraction of today's advances and how they can address challenges in important areas such as energy, education, agriculture, and health. The four-day conference highlighted eleven plenary talks by outstanding scientists working in important areas of optics and photonics. A. Aspect, T. Kippenberg (2013 ICO Prize awardee) and K. Razewski (2013 ICO Galileo Galilei Award) spoke on quantum optics; P. Russell and Yu. Kivshar lectured on topics related to optical processing devices as optical fibers and metamaterials for light shaping; N. X. Fang (2011 ICO Prize), U. Woggon, and A. Alú (2013 IUPAP Young Scientists Prize) discussed applications of optics to nanoscience; and K. Dholakia and J. Widjaja (2008 Galileo Galilei Award) presented in their plenaries

  11. Third International Conference on Computational Science, Engineering and Information Technology (CCSEIT-2013), v.1

    CERN Document Server

    Kumar, Ashok; Annamalai, Annamalai

    2013-01-01

      This book is the proceedings of Third International Conference on Computational Science, Engineering and Information Technology (CCSEIT-2013) that was held in Konya, Turkey, on June 7-9. CCSEIT-2013 provided an excellent international forum for sharing knowledge and results in theory, methodology and applications of computational science, engineering and information technology. This book contains research results, projects, survey work and industrial experiences representing significant advances in the field. The different contributions collected in this book cover five main areas: algorithms, data structures and applications;  wireless and mobile networks; computer networks and communications; natural language processing and information theory; cryptography and information security.  

  12. FTRA 4th International Conference on Mobile, Ubiquitous, and Intelligent Computing

    CERN Document Server

    Adeli, Hojjat; Park, Namje; Woungang, Isaac

    2014-01-01

    MUSIC 2013 will be the most comprehensive text focused on the various aspects of Mobile, Ubiquitous and Intelligent computing. MUSIC 2013 provides an opportunity for academic and industry professionals to discuss the latest issues and progress in the area of intelligent technologies in mobile and ubiquitous computing environment. MUSIC 2013 is the next edition of the 3rd International Conference on Mobile, Ubiquitous, and Intelligent Computing (MUSIC-12, Vancouver, Canada, 2012) which was the next event in a series of highly successful International Workshop on Multimedia, Communication and Convergence technologies MCC-11 (Crete, Greece, June 2011), MCC-10 (Cebu, Philippines, August 2010).

  13. Proceedings of the 2007 International Computer Music Conference

    DEFF Research Database (Denmark)

    University. ICMC is the largest conference of its kind, and it has been organized yearly since 1974. We are happy to have ICMC back in Denmark after the 1994 ICMC that took place in Aarhus. We would like to thank the technical program committee, the program committee and the reviewers who have been really...... efficient in providing feedback and comments on the numerous papers submitted. The response to the call for participation was very positive. We received 290 paper submissions and 554 music submissions. We are extremely grateful for the interest and support from around the world. It is an honor to welcome...... of the ICMC music submissions will enable everybody to enjoy the ICMC concerts fully. As a second major theme, we are happy to present several concerts involving collaborations between new circus and computer music artists. We have organized a one week Artists in residence to investigate the possibilities...

  14. A Line Search Multilevel Truncated Newton Algorithm for Computing the Optical Flow

    Directory of Open Access Journals (Sweden)

    Lluís Garrido

    2015-06-01

    Full Text Available We describe the implementation details and give the experimental results of three optimization algorithms for dense optical flow computation. In particular, using a line search strategy, we evaluate the performance of the unilevel truncated Newton method (LSTN, a multiresolution truncated Newton (MR/LSTN and a full multigrid truncated Newton (FMG/LSTN. We use three image sequences and four models of optical flow for performance evaluation. The FMG/LSTN algorithm is shown to lead to better optical flow estimation with less computational work than both the LSTN and MR/LSTN algorithms.

  15. Tablet computer enhanced training improves internal medicine exam performance

    Science.gov (United States)

    Wende, Ilja; Grittner, Ulrike

    2017-01-01

    Background Traditional teaching concepts in medical education do not take full advantage of current information technology. We aimed to objectively determine the impact of Tablet PC enhanced training on learning experience and MKSAP® (medical knowledge self-assessment program) exam performance. Methods In this single center, prospective, controlled study final year medical students and medical residents doing an inpatient service rotation were alternatingly assigned to either the active test (Tablet PC with custom multimedia education software package) or traditional education (control) group, respectively. All completed an extensive questionnaire to collect their socio-demographic data, evaluate educational status, computer affinity and skills, problem solving, eLearning knowledge and self-rated medical knowledge. Both groups were MKSAP® tested at the beginning and the end of their rotation. The MKSAP® score at the final exam was the primary endpoint. Results Data of 55 (tablet n = 24, controls n = 31) male 36.4%, median age 28 years, 65.5% students, were evaluable. The mean MKSAP® score improved in the tablet PC (score Δ + 8 SD: 11), but not the control group (score Δ- 7, SD: 11), respectively. After adjustment for baseline score and confounders the Tablet PC group showed on average 11% better MKSAP® test results compared to the control group (pcomputer based integrated training and clinical practice enhances medical education and exam performance. Larger, multicenter trials are required to independently validate our data. Residency and fellowship directors are encouraged to consider adding portable computer devices, multimedia content and introduce blended learning to their respective training programs. PMID:28369063

  16. High-Power Amplifier Compatible Internally Sensed Optical Phased Array for Space Debris Tracking and Maneuvering

    Science.gov (United States)

    Roberts, L.; Francis, S.; Sibley, P.; Ward, R.; Smith, C.; McClelland, D.; Shaddock, D.

    2016-09-01

    Optical phased arrays (OPAs) provide a way to scale optical power beyond the capabilities of conventional CW lasers via coherent beam combination. By stabilising the relative output phase of multiple spatially separate lasers, OPAs form a coherent optical wavefront in the far field. Since the phase of each laser can be controlled independently, OPAs also have the ability to manipulate the distribution of optical power in the far field, and therefore may provide the capability to compensate for atmospheric turbulence. Combined with their inherent scalability and high power handling capabilities, OPAs are a promising technology for CW space debris ranging and manoeuvring. The OPA presented here is unique in its ability to sense the phase of each laser internally, without requiring any external sampling optics between it and the telescope. This allows the internally sensed OPA to be constructed entirely within fibre, utilising high-power fiber amplifiers to scale optical power beyond the limits of any conventional single lasers. The total power that can be delivered by each emitter in the OPA is limited only by the onset of stimulated Brillouin scattering, a non-linear effect that clamps the amount of power that can be delivered through a fiber waveguide. A three element internally sensed OPA developed at the Australian National University has been demonstrated to coherently combine three commercial 15 Watt fiber amplifiers with an output phase stability of one 200th of a wavelength. We have also demonstrated the ability to dynamically manipulate the distribution of optical power in the far-field at a bandwidth of up to 10 kHz. Since the OPA's control system is implemented using field-programmable gate-array technology, the system may be scaled beyond 100 emitters, potentially reaching the kilowatt level optical powers required to perturb the orbit of space debris.

  17. Reducing the phase sensitivity of laser-based optical reservoir computing systems.

    Science.gov (United States)

    Nguimdo, Romain Modeste; Verschaffelt, Guy; Danckaert, Jan; Van der Sande, Guy

    2016-01-25

    Optical implementations of reservoir computing systems are very promising because of their high processing speeds and the possibility to process several tasks in parallel. These systems can be implemented using semiconductor lasers subject to optical delayed feedback and optical injection. While the amount of the feedback/injection can be easily controlled, it is much more difficult to control the optical feedback/injection phase. We present extensive numerical investigations of the influence of the feedback/injection phases on laser-based reservoir computing systems with feedback. We show that a change in the phase can lead to a strong reduction in the reservoir computing system performance. We introduce a new readout layer design that -at least for some tasks- reduces this sensitivity to changes in the phase. It consists in optimizing the readout weights from a coherent combination of the reservoir's readout signal and its delayed version rather than only from the reservoir's readout signal as is usually done.

  18. Myocardial Motion Estimation: An Evaluation of Optical Flow Computation Techniques on Echocardiographic Images

    Directory of Open Access Journals (Sweden)

    Slamet Riyadi

    2011-01-01

    Full Text Available The use of image processing technique for cardiac motion analysis has been an active research in the past decade. The estimation of myocardial motion eases the cardiologist in diagnosing cardiac abnormalities. In term of movement analysis, optical flow is the most popular technique that has been used by researchers. This paper describes the implementation and evaluation of three optical flow computation techniques to estimate the myocardial motion using echocardiographic images. The three techniquesare the global smoothness method (GSM, the local smoothness method (LSM and warping technique (WT. Optical flow field is computed based on healthy cardiac video on parasternal short axes view. These techniques look promising since the optical flow fields can be utilized to estimate the myocardial movement and comply with its true movement. The performances of each technique in terms of the direction, homogeneity and computing time, are also discussed.

  19. NINJA: a noninvasive framework for internal computer security hardening

    Science.gov (United States)

    Allen, Thomas G.; Thomson, Steve

    2004-07-01

    Vulnerabilities are a growing problem in both the commercial and government sector. The latest vulnerability information compiled by CERT/CC, for the year ending Dec. 31, 2002 reported 4129 vulnerabilities representing a 100% increase over the 2001 [1] (the 2003 report has not been published at the time of this writing). It doesn"t take long to realize that the growth rate of vulnerabilities greatly exceeds the rate at which the vulnerabilities can be fixed. It also doesn"t take long to realize that our nation"s networks are growing less secure at an accelerating rate. As organizations become aware of vulnerabilities they may initiate efforts to resolve them, but quickly realize that the size of the remediation project is greater than their current resources can handle. In addition, many IT tools that suggest solutions to the problems in reality only address "some" of the vulnerabilities leaving the organization unsecured and back to square one in searching for solutions. This paper proposes an auditing framework called NINJA (acronym for Network Investigation Notification Joint Architecture) for noninvasive daily scanning/auditing based on common security vulnerabilities that repeatedly occur in a network environment. This framework is used for performing regular audits in order to harden an organizations security infrastructure. The framework is based on the results obtained by the Network Security Assessment Team (NSAT) which emulates adversarial computer network operations for US Air Force organizations. Auditing is the most time consuming factor involved in securing an organization's network infrastructure. The framework discussed in this paper uses existing scripting technologies to maintain a security hardened system at a defined level of performance as specified by the computer security audit team. Mobile agents which were under development at the time of this writing are used at a minimum to improve the noninvasiveness of our scans. In general, noninvasive

  20. International Journal of Computer Science and Engineering Survey (IJCSES

    Directory of Open Access Journals (Sweden)

    Sohini Roychowdhury

    2015-10-01

    Full Text Available Automated facial identification and facial expression recognition have topics of active research over the past few decades. Facial and expression recognition find applications in human-computer interfaces, subject tracking, real-time security surveillance systems and social networking. Several holistic and geometric methods have been developed to identify faces and expressions using public and local facial image databases. In this work we present the evolution in facial image data sets and the methodologies for facial identification and recognition of expressions such as anger, sadness, happiness, disgust, fear and surprise. We observe that most of the earlier methods for facial and expression recognition aimed at improving the recognition rates for facial feature-based methods using static images. However, the recent methodologies have shifted focus towards robust implementation of facial/expression recognition from large image databases that vary with space (gathered from the internet and time (video recordings. The evolution trends in databases and methodologies for facial and expression recognition can be useful for assessing the next-generation topics that may have applications in security systems or personal identification systems that involve “Quantitative face” assessments.

  1. A fiber-optic retractor for harvesting the internal mammary artery.

    Science.gov (United States)

    Angelini, G D; Azzu, A A

    1990-08-01

    A retractor for exposure and dissection of the internal mammary artery incorporating a fiber-optic transillumination system is presented. The device, which can be converted to a standard sternal retractor, has also proved valuable in improving illumination during procedures on the mitral valve and in facilitating dissection of fibrous adhesions from the anterior surface of the heart at reoperation.

  2. Internal model control of a fast steering mirror for electro-optical fine tracking

    Science.gov (United States)

    Xia, Yun-xia; Bao, Qi-liang; Wu, Qiong-yan

    2010-11-01

    The objective of this research is to develop advanced control methods to improve the bandwidth and tracking precision of the electro-optical fine tracking system using a fast steering mirror (FSM). FSM is the most important part in this control system. The model of FSM is established at the beginning of this paper. Compared with the electro-optical fine tracking system with ground based platform, the electro-optical fine tracking system with movement based platform must be a wide bandwidth and a robustness system. An advanced control method based on internal model control law is developed for electro-optical fine tracking system. The IMC is an advanced algorithm. Theoretically, it can eliminate disturbance completely and make sure output equals to input even there is model error. Moreover, it separates process to the system dynamic characteristic and the object perturbation. Compared with the PID controller, the controller is simpler and the parameter regulation is more convenient and the system is more robust. In addition, we design an improved structure based on classic IMC. The tracking error of the two-port control system is much better than which of the classic IMC. The simulation results indicate that the electro-optical control system based on the internal model control algorithm is very effective. It shows a better performance at the tracing precision and the disturbance suppresses. Thus a new method is provided for the high-performance electro-optical fine tracking system.

  3. Fourth International Conference on Computer Science and Its Applications (CIIA 2013)

    CERN Document Server

    Mohamed, Otmane; Bellatreche, Ladjel; Recent Advances in Robotics and Automation

    2013-01-01

        "During the last decades Computational Intelligence has emerged and showed its contributions in various broad research communities (computer science, engineering, finance, economic, decision making, etc.). This was done by proposing approaches and algorithms based either on turnkey techniques belonging to the large panoply of solutions offered by computational intelligence such as data mining, genetic algorithms, bio-inspired methods, Bayesian networks, machine learning, fuzzy logic, artificial neural networks, etc. or inspired by computational intelligence techniques to develop new ad-hoc algorithms for the problem under consideration.    This volume is a comprehensive collection of extended contributions from the 4th International Conference on Computer Science and Its Applications (CIIA’2013) organized into four main tracks: Track 1: Computational Intelligence, Track  2: Security & Network Technologies, Track  3: Information Technology and Track 4: Computer Systems and Applications. This ...

  4. Effects of internal mixing and aggregate morphology on optical properties of black carbon using a discrete dipole approximation model

    Directory of Open Access Journals (Sweden)

    B. Scarnato

    2012-10-01

    Full Text Available According to recent studies, internal mixing of black carbon (BC with other aerosol materials in the atmosphere alters its aggregate shape, absorption of solar radiation, and radiative forcing. These mixing state effects are not yet fully understood. In this study, we characterize the morphology and mixing state of bare BC and BC internally mixed with sodium chloride (NaCl using electron microscopy and examine the sensitivity of optical properties to BC mixing state and aggregate morphology using a discrete dipole approximation model (DDSCAT. DDSCAT predicts a higher mass absorption coefficient, lower single scattering albedo (SSA, and higher absorption Angstrom exponent (AAE for bare BC aggregates that are lacy rather than compact. Predicted values of SSA at 550 nm range between 0.18 and 0.27 for lacy and compact aggregates, respectively, in agreement with reported experimental values of 0.25 ± 0.05. The variation in absorption with wavelength does not adhere precisely to a power law relationship over the 200 to 1000 nm range. Consequently, AAE values depend on the wavelength region over which they are computed. In the 300 to 550 nm range, AAE values ranged in this study from 0.70 for compact to 0.95 for lacy aggregates. The SSA of BC internally mixed with NaCl (100–300 nm in radius is higher than for bare BC and increases with the embedding in the NaCl. Internally mixed BC SSA values decrease in the 200–400 nm wavelength range, a feature also common to the optical properties of dust and organics. Linear polarization features are also predicted in DDSCAT and are dependent on particle morphology. The bare BC (with a radius of 80 nm presents in the linear polarization a bell shape feature, which is a characteristic of the Rayleigh regime (for particles smaller than the wavelength of incident radiation. When BC is internally mixed with NaCl (100–300 nm in radius, strong depolarization features for near-VIS incident radiation are evident

  5. 3rd ACIS International Conference on Applied Computing and Information Technology

    CERN Document Server

    2016-01-01

    This edited book presents scientific results of the 3nd International Conference on Applied Computing and Information Technology (ACIT 2015) which was held on July 12-16, 2015 in Okayama, Japan. The aim of this conference was to bring together researchers and scientists, businessmen and entrepreneurs, teachers, engineers, computer users, and students to discuss the numerous fields of computer science and to share their experiences and exchange new ideas and information in a meaningful way. Research results about all aspects (theory, applications and tools) of computer and information science, and to discuss the practical challenges encountered along the way and the solutions adopted to solve them.

  6. 4th IEEE/ACIS International Conference on Computer and Information Science

    CERN Document Server

    2016-01-01

    This edited book presents scientific results of the 14th IEEE/ACIS International Conference on Computer and Information Science (ICIS 2015) which was held on June 28 – July 1, 2015 in Las Vegas, USA. The aim of this conference was to bring together researchers and scientists, businessmen and entrepreneurs, teachers, engineers, computer users, and students to discuss the numerous fields of computer science and to share their experiences and exchange new ideas and information in a meaningful way. Research results about all aspects (theory, applications and tools) of computer and information science, and to discuss the practical challenges encountered along the way and the solutions adopted to solve them.

  7. 1st International Conference on Computer Science, Applied Mathematics and Applications (ICCSAMA 2013)

    CERN Document Server

    Do, Tien; Thi, Hoai; Advanced Computational Methods for Knowledge Engineering

    2013-01-01

    The book consists of 29 extended chapters which have been selected and invited from the submissions to the 1st International Conference on Computer Science, Applied Mathematics and Applications (ICCSAMA 2013) held on 9-10 May, 2013 in Warsaw, Poland. The book is organized into five parts, which are: Advanced Optimization Methods and Their Applications, Queueing Theory and Applications, Computational Methods for Knowledge Engineering, Knowledge Engineering with Cloud and Grid Computing, and Logic Based Methods for Decision Making and Data Mining, respectively. All chapters in the book discuss theoretical and practical issues connected with computational methods and optimization methods for knowledge engineering.

  8. GRAPH-BASED POST INCIDENT INTERNAL AUDIT METHOD OF COMPUTER EQUIPMENT

    Directory of Open Access Journals (Sweden)

    I. S. Pantiukhin

    2016-05-01

    Full Text Available Graph-based post incident internal audit method of computer equipment is proposed. The essence of the proposed solution consists in the establishing of relationships among hard disk damps (image, RAM and network. This method is intended for description of information security incident properties during the internal post incident audit of computer equipment. Hard disk damps receiving and formation process takes place at the first step. It is followed by separation of these damps into the set of components. The set of components includes a large set of attributes that forms the basis for the formation of the graph. Separated data is recorded into the non-relational database management system (NoSQL that is adapted for graph storage, fast access and processing. Damps linking application method is applied at the final step. The presented method gives the possibility to human expert in information security or computer forensics for more precise, informative internal audit of computer equipment. The proposed method allows reducing the time spent on internal audit of computer equipment, increasing accuracy and informativeness of such audit. The method has a development potential and can be applied along with the other components in the tasks of users’ identification and computer forensics.

  9. Computational Study of Linear and Nonlinear Optical Properties of Single Molecules and Clusters of Organic Electro-Optic Chromophores

    Science.gov (United States)

    Garrett, Kerry

    Organic electro-optic (OEO) materials integrated into silicon-organic hybrid (SOH) devices afford significant improvements in size, weight, power, and bandwidth (SWAP) performance of integrated electronic/photonic systems critical for current and next generation telecommunication, computer, sensor, transportation, and defense technologies. Improvement in molecular first hyperpolarizability, and in turn electro-optic activity, is crucial to further improvement in the performance of SOH devices. The timely preparation of new chromophores with improved molecular first hyperpolarizability requires theoretical guidance; however, common density functional theory (DFT) methods often perform poorly for optical properties in systems with substantial intramolecular charge transfer character. The first part of this dissertation describes the careful evaluation of popular long-range correction (LC) and range-separated hybrid (RSH) density functional theory (DFT) for definition of structure/function relationships crucial for the optimization of molecular first hyperpolarizability, beta. In particular, a benchmark set of well-characterized OEO chromophores is used to compare calculated results with the corresponding experimentally measured linear and nonlinear optical properties; respectively, the wavelength of the peak one-photon absorption energy, lambdamax, and beta. A goal of this work is to systematically determine the amount of exact exchange in LC/RSH-DFT methods required for accurately computing these properties for a variety OEO chromophores. High-level electron correlation (post-Hartree-Fock) methods are also investigated and compared with DFT. Included are results for the computation of beta using second-order Moller-Plesset perturbation theory (MP2) and the double-hybrid method, B2PLYP. The second part of this work transitions from single-molecule studies to computing bulk electronic and nonlinear optical properties of molecular crystals and isotropic ensembles of a

  10. Optics learning by computing, with examples using Maple, MathCad, Mathematica, and MATLAB

    CERN Document Server

    Moeller, Karl Dieter

    2007-01-01

    This new edition is intended for a one semester course in optics for juniors and seniors in science and engineering; it uses scripts from Maple, MathCad, Mathematica, and MATLAB provide a simulated laboratory where students can learn by exploration and discovery instead of passive absorption. The text covers all the standard topics of a traditional optics course, including: geometrical optics and aberration, interference and diffraction, coherence, Maxwell's equations, wave guides and propagating modes, blackbody radiation, atomic emission and lasers, optical properties of materials, Fourier transforms and FT spectroscopy, image formation, and holography. It contains step by step derivations of all basic formulas in geometrical, wave and Fourier optics. The basic text is supplemented by over 170 files in Maple, MathCad, Mathematica, and MATLAB (many of which are in the text, each suggesting programs to solve a particular problem, and each linked to a topic in or application of optics. The computer files are d...

  11. Optically Driven Spin Based Quantum Dots for Quantum Computing

    Science.gov (United States)

    2008-01-01

    a), no deco - herence or inhomogeneous broadening is present (T−12 = σ = 0); In (b), T2 = 200 ns but σ = 0; In (c), T2 = 200 ns and σ−1 = 10 ns. (d...processes involves at least two orders of optical field and hole-burning two more. The state-of-the- art spec- troscopy already has the ultrahigh resolution

  12. Comparison of computer-based and optical face recognition paradigms

    Science.gov (United States)

    Alorf, Abdulaziz A.

    The main objectives of this thesis are to validate an improved principal components analysis (IPCA) algorithm on images; designing and simulating a digital model for image compression, face recognition and image detection by using a principal components analysis (PCA) algorithm and the IPCA algorithm; designing and simulating an optical model for face recognition and object detection by using the joint transform correlator (JTC); establishing detection and recognition thresholds for each model; comparing between the performance of the PCA algorithm and the performance of the IPCA algorithm in compression, recognition and, detection; and comparing between the performance of the digital model and the performance of the optical model in recognition and detection. The MATLAB(c) software was used for simulating the models. PCA is a technique used for identifying patterns in data and representing the data in order to highlight any similarities or differences. The identification of patterns in data of high dimensions (more than three dimensions) is too difficult because the graphical representation of data is impossible. Therefore, PCA is a powerful method for analyzing data. IPCA is another statistical tool for identifying patterns in data. It uses information theory for improving PCA. The joint transform correlator (JTC) is an optical correlator used for synthesizing a frequency plane filter for coherent optical systems. The IPCA algorithm, in general, behaves better than the PCA algorithm in the most of the applications. It is better than the PCA algorithm in image compression because it obtains higher compression, more accurate reconstruction, and faster processing speed with acceptable errors; in addition, it is better than the PCA algorithm in real-time image detection due to the fact that it achieves the smallest error rate as well as remarkable speed. On the other hand, the PCA algorithm performs better than the IPCA algorithm in face recognition because it offers

  13. Computer Generated Optical Illusions: A Teaching and Research Tool.

    Science.gov (United States)

    Bailey, Bruce; Harman, Wade

    Interactive computer-generated simulations that highlight psychological principles were investigated in this study in which 33 female and 19 male undergraduate college student volunteers of median age 21 matched line and circle sizes in six variations of Ponzo's illusion. Prior to working with the illusions, data were collected based on subjects'…

  14. Optimization of computer-generated holograms for dynamic optical manipulation with uniform structured light spots

    Institute of Scientific and Technical Information of China (English)

    Jing Bu; Guanghui Yuan; Yuyang Sun; Siwei Zhu; Xiaocong Yuan

    2011-01-01

    An optimized iterative technique combining the merits of conventional Gerchber-Saxton (G-S) and adaptive-additive (A-A) algorithms to design multilevel computer-generated holograms for the creation of a desirable structured intensity pattern for multiple optical manipulation is theoretically adopted. Optical trap arrays are demonstrated with the help of liquid crystal spatial light modulator and a microscopic optical tweezer system. Additionally, continuous locked-in transport and deflection of microparticles with the generated optical lattice is proven experimentally. The proposed method possesses apparent high efficiency, high uniformity, and dynamic and reconfigurable advantages.%@@ An optimized iterative technique combining the merits of conventional Gerchber-Saxton (G-S) and adaptive-additive (A-A) algorithms to design multilevel computer-generated holograms for the creation of a desirable structured intensity pattern for multiple optical manipulation is theoretically adopted.Optical trap arrays are demonstrated with the help of liquid crystal spatial light modulator and a microscopic optical tweezer system.Additionally, continuous locked-in transport and deflection of microparticles with the generated optical lattice is proven experimentally.The proposed method possesses apparent high efficiency, high uniformity, and dynamic and reconfigurable advantages.

  15. 16th International Conference on Medical Image Computing and Computer Assisted Intervention

    CERN Document Server

    Klinder, Tobias; Li, Shuo

    2014-01-01

    This book contains the full papers presented at the MICCAI 2013 workshop Computational Methods and Clinical Applications for Spine Imaging. The workshop brought together researchers representing several fields, such as Biomechanics, Engineering, Medicine, Mathematics, Physics and Statistic. The works included in this book present and discuss new trends in those fields, using several methods and techniques in order to address more efficiently different and timely applications involving signal and image acquisition, image processing and analysis, image segmentation, image registration and fusion, computer simulation, image based modelling, simulation and surgical planning, image guided robot assisted surgical and image based diagnosis.

  16. Predictors of internal mammary vessel diameter: A computed tomographic angiography-assisted anatomic analysis.

    Science.gov (United States)

    Cook, Julia A; Tholpady, Sunil S; Momeni, Arash; Chu, Michael W

    2016-10-01

    The internal mammary vessels are the most common recipient vessels in free flap breast reconstruction. The literature on internal mammary vascular anatomy is limited by small sample sizes, cadaveric studies, or intraoperative changes. The purpose of this study is to analyze internal mammary anatomy using computed tomographic angiography. A retrospective review of 110 consecutive computed tomographic angiography studies of female patients was performed. Measurements of vessel caliber, distance of internal mammary vessels to sternum, location of internal mammary vein bifurcation, intercostal space height, and chest width were analyzed. Patient demographics and comorbidities were reviewed. The right internal mammary artery and vein were larger than the left in all intercostal spaces (p = 0.02 and p breast reconstruction. On average, the internal mammary vein bifurcates at the third intercostal space; patients with larger chest widths and body mass index had larger caliber internal mammary vessels, and 25% of patients had third intercostal space <1.5 cm and, thus, may not be suitable candidates for rib-sparing techniques.

  17. 4th International Conference on Computational Collective Intel- ligence Technologies and Applications (ICCCI 2012)

    CERN Document Server

    Trawiński, Bogdan; Katarzyniak, Radosław; Jo, Geun-Sik; Advanced Methods for Computational Collective Intelligence

    2013-01-01

    The book consists of 35 extended chapters which have been selected and invited from the submissions to the 4th International Conference on Computational Collective Intelligence Technologies and Applications (ICCCI 2012) held on November 28-30, 2012 in Ho Chi Minh City, Vietnam. The book is organized into six parts, which are semantic web and ontologies, social networks and e-learning, agent and multiagent systems, data mining methods and applications, soft computing, and optimization and control, respectively. All chapters in the book discuss theoretical and practical issues connected with computational collective intelligence and related technologies. The editors hope that the book can be useful for graduate and Ph.D. students in Computer Science, in particular participants in courses on Soft Computing, Multiagent Systems, and Data Mining. This book can be also useful for researchers working on the concept of computational collective intelligence in artificial populations. It is the hope of the editors that ...

  18. Computational Fluid Dynamics (CFD) Analysis Of Optical Payload For Lasercomm Science (OPALS) sealed enclosure module

    Science.gov (United States)

    Anderson, Kevin R.; Zayas, Daniel; Turner, Daniel

    2012-01-01

    Computational Fluid Dynamics (CFD) using the commercial CFD package CFDesign has been performed at NASA Jet Propulsion Laboratory (JPL) California Institute of Technology (Caltech) in support of the Phaeton Early Career Hire Program's Optical Payload for Lasercomm Science (OPALS) mission. The OPALS project is one which involves an International Space Station payload that will be using forced convection cooling in a hermetically sealed enclosure at 1 atm of air to cool "off-the-shelf" vendor electronics. The CFD analysis was used to characterize the thermal and fluid flow environment within a complicated labyrinth of electronics boards, fans, instrumentation, harnessing, ductwork and heat exchanger fins. The paradigm of iteratively using CAD/CAE tools and CFD was followed in order to determine the optimum flow geometry and heat sink configuration to yield operational convective film coefficients and temperature survivability limits for the electronics payload. Results from this current CFD analysis and correlation of the CFD model against thermal test data will be presented. Lessons learned and coupled thermal / flow modeling strategies will be shared in this paper.

  19. 8th International Conference on Bio-Inspired Computing : Theories and Applications

    CERN Document Server

    Pan, Linqiang; Fang, Xianwen

    2013-01-01

    International Conference on Bio-Inspired Computing: Theories and Applications (BIC-TA) is one of the flagship conferences on Bio-Computing, bringing together the world’s leading scientists from different areas of Natural Computing. Since 2006, the conferences have taken place at Wuhan (2006), Zhengzhou (2007), Adelaide (2008), Beijing (2009), Liverpool & Changsha (2010), Malaysia (2011) and India (2012). Following the successes of previous events, the 8th conference is organized and hosted by Anhui University of Science and Technology in China. This conference aims to provide a high-level international forum that researchers with different backgrounds and who are working in the related areas can use to present their latest results and exchange ideas. Additionally, the growing trend in Emergent Systems has resulted in the inclusion of two other closely related fields in the BIC-TA 2013 event, namely Complex Systems and Computational Neuroscience. These proceedings are intended for researchers in the fiel...

  20. International Conference on Artificial Intelligence and Evolutionary Computations in Engineering Systems

    CERN Document Server

    Vijayakumar, K; Panigrahi, Bijaya; Das, Swagatam

    2017-01-01

    The volume is a collection of high-quality peer-reviewed research papers presented in the International Conference on Artificial Intelligence and Evolutionary Computation in Engineering Systems (ICAIECES 2016) held at SRM University, Chennai, Tamilnadu, India. This conference is an international forum for industry professionals and researchers to deliberate and state their research findings, discuss the latest advancements and explore the future directions in the emerging areas of engineering and technology. The book presents original work and novel ideas, information, techniques and applications in the field of communication, computing and power technologies.

  1. International Conference on Artificial Intelligence and Evolutionary Computations in Engineering Systems

    CERN Document Server

    Bhaskar, M; Panigrahi, Bijaya; Das, Swagatam

    2016-01-01

    The book is a collection of high-quality peer-reviewed research papers presented in the first International Conference on International Conference on Artificial Intelligence and Evolutionary Computations in Engineering Systems (ICAIECES -2015) held at Velammal Engineering College (VEC), Chennai, India during 22 – 23 April 2015. The book discusses wide variety of industrial, engineering and scientific applications of the emerging techniques. Researchers from academic and industry present their original work and exchange ideas, information, techniques and applications in the field of Communication, Computing and Power Technologies.

  2. The Human Dimension of Computer-Mediated Communications: Implications for International Educational Computer Conferences.

    Science.gov (United States)

    Scott, Douglass J.

    This article presents a conceptual framework for the research and practice of educational computer conferences that shifts the focus from the on-line messages being exchanged to the participants' engagement with the conference. This framework, known as the "Iceberg Metaphor" or the "Michigan Model of educational…

  3. An international comparison of surface texture parameters quantification on polymer artefacts using optical instruments

    DEFF Research Database (Denmark)

    Tosello, Guido; Haitjema, H.; Leach, R.K.

    2016-01-01

    scanning interferometers) from thirteen research laboratories worldwide. Results demonstrated that: (i)Agreement among different instruments could be achieved to a limited extent; (ii) standardisedguidelines for uncertainty evaluation of areal surface parameters are needed for users; (iii......An international comparison of optical instruments measuring polymer surfaces with arithmetic mean height values in the sub-micrometre range has been carried out. The comparison involved sixteen optical surface texture instruments (focus variation instruments, confocal microscopes and coherent......) it is essentialthat the performance characteristics (and especially the spatial frequency response) of an instrument isunderstood prior to a measurement....

  4. Synthesis of Photochromic Oligophenylenimines: Optical and Computational Studies

    Directory of Open Access Journals (Sweden)

    Armando I. Martínez Pérez

    2015-03-01

    Full Text Available Phenyleneimine oligomers 4,4'-(((1E,1'E-(((1E,1'E-(1,4-phenylenebis-(azanylylidenebis(methanylylidenebis(2,5-bis(octyloxy-4,1-phenylenebis(methanylyl-idene-bis(azanylylidenedianiline (OIC1MS and 7,7'-(((1E,1'E-(((1E,1'E-((9H-fluorene-2,7-diylbis(azanylylidenebis(methanylylidenebis(2,5-bis(octyloxy-4,1phenylenebis- (methanylylidenebis(azanylylidenebis(9H-fluoren-2-amine (OIC2MS were prepared by means of conventional and mechanochemical synthesis and characterized by FT-IR, 1H- and 13C-NMR techniques. The optical properties of the compounds were studied in solution by using UV-visible spectroscopy, and the optical effects were analyzed as a function of solvent. The results show that OIC2MS exhibits interesting photochromic properties. Furthermore, the structural and electronic properties of the compounds were analyzed by TD-DFT. It was found that the mechanosynthesis is an efficient method for the synthesis of both tetraimines.

  5. Synthesis of photochromic oligophenylenimines: optical and computational studies.

    Science.gov (United States)

    Pérez, Armando I Martínez; Alonso, Oscar Coreño; Borbolla, Julián Cruz; Vásquez-Pérez, José M; Alonso, Juan Coreño; Ayala, Karina Alemán; Luna-Bárcenas, Gabriel; Pandiyan, Thangarasu; García, Rosa A Vázquez

    2015-03-27

    Phenyleneimine oligomers 4,4'-(((1E,1'E)-(((1E,1'E)-(1,4-phenylenebis-(azanylylidene))bis(methanylylidene))bis(2,5-bis(octyloxy)-4,1-phenylene))bis(methanylyl-idene))-bis(azanylylidene))dianiline (OIC1MS) and 7,7'-(((1E,1'E)-(((1E,1'E)-((9H-fluorene-2,7-diyl)bis(azanylylidene))bis(methanylylidene))bis(2,5-bis(octyloxy)-4,1phenylene))bis- (methanylylidene))bis(azanylylidene))bis(9H-fluoren-2-amine) (OIC2MS) were prepared by means of conventional and mechanochemical synthesis and characterized by FT-IR, 1H- and 13C-NMR techniques. The optical properties of the compounds were studied in solution by using UV-visible spectroscopy, and the optical effects were analyzed as a function of solvent. The results show that OIC2MS exhibits interesting photochromic properties. Furthermore, the structural and electronic properties of the compounds were analyzed by TD-DFT. It was found that the mechanosynthesis is an efficient method for the synthesis of both tetraimines.

  6. International Conference on Emerging Technologies for Information Systems, Computing, and Management

    CERN Document Server

    Ma, Tinghuai; Emerging Technologies for Information Systems, Computing, and Management

    2013-01-01

    This book aims to examine innovation in the fields of information technology, software engineering, industrial engineering, management engineering. Topics covered in this publication include; Information System Security, Privacy, Quality Assurance, High-Performance Computing and Information System Management and Integration. The book presents papers from The Second International Conference for Emerging Technologies Information Systems, Computing, and Management (ICM2012) which was held on December 1 to 2, 2012 in Hangzhou, China.

  7. International Conference on Emerging Research in Electronics, Computer Science and Technology

    CERN Document Server

    Sheshadri, Holalu; Padma, M

    2014-01-01

    PES College of Engineering is organizing an International Conference on Emerging Research in Electronics, Computer Science and Technology (ICERECT-12) in Mandya and merging the event with Golden Jubilee of the Institute. The Proceedings of the Conference presents high quality, peer reviewed articles from the field of Electronics, Computer Science and Technology. The book is a compilation of research papers from the cutting-edge technologies and it is targeted towards the scientific community actively involved in research activities.

  8. Simultaneous Computation of Two Independent Tasks Using Reservoir Computing Based on a Single Photonic Nonlinear Node With Optical Feedback.

    Science.gov (United States)

    Nguimdo, Romain Modeste; Verschaffelt, Guy; Danckaert, Jan; Van der Sande, Guy

    2015-12-01

    In this brief, we numerically demonstrate a photonic delay-based reservoir computing system, which processes, in parallel, two independent computational tasks even when the two tasks have unrelated input streams. Our approach is based on a single-longitudinal mode semiconductor ring laser (SRL) with optical feedback. The SRL emits in two directional optical modes. Each directional mode processes one individual task to mitigate possible crosstalk. We illustrate the feasibility of our scheme by analyzing the performance on two benchmark tasks: 1) chaotic time series prediction and 2) nonlinear channel equalization. We identify some feedback configurations for which the results for simultaneous prediction/classification indicate a good performance, but with slight degradation (as compared with the performance obtained for single task processing) due to nonlinear and linear interactions between the two directional modes of the laser. In these configurations, the system performs well on both tasks for a broad range of the parameters.

  9. Analog Optical Computing Based on Dielectric Meta-reflect-array

    CERN Document Server

    Chizari, Ata; Jamali, Mohammad Vahid; Salehi, Jawad A

    2016-01-01

    In this paper, we realize the concept of analog computing using an array of engineered gradient dielectric meta-reflect-array. The proposed configuration consists of individual subwavelength silicon nanobricks in combination with fused silica spacer and silver ground plane realizing a reflection beam with full phase coverage $2\\pi$ degrees as well as amplitude range $0$ to $1$. Spectrally overlapping electric and magnetic dipole resonances, such high-index dielectric metasurfaces can locally and independently manipulate the amplitude and phase of the incident electromagnetic wave. This practically feasible structure overcomes substantial limitations imposed by plasmonic metasurfaces such as absorption losses and low polarization conversion efficiency in the visible range. Using such CMOS-compatible and easily integrable platforms promises highly efficient ultrathin planar wave-based computing systems which circumvent the drawbacks of conventional bulky lens-based signal processors. Based on these key properti...

  10. Optical image hiding based on computational ghost imaging

    Science.gov (United States)

    Wang, Le; Zhao, Shengmei; Cheng, Weiwen; Gong, Longyan; Chen, Hanwu

    2016-05-01

    Imaging hiding schemes play important roles in now big data times. They provide copyright protections of digital images. In the paper, we propose a novel image hiding scheme based on computational ghost imaging to have strong robustness and high security. The watermark is encrypted with the configuration of a computational ghost imaging system, and the random speckle patterns compose a secret key. Least significant bit algorithm is adopted to embed the watermark and both the second-order correlation algorithm and the compressed sensing (CS) algorithm are used to extract the watermark. The experimental and simulation results show that the authorized users can get the watermark with the secret key. The watermark image could not be retrieved when the eavesdropping ratio is less than 45% with the second-order correlation algorithm, whereas it is less than 20% with the TVAL3 CS reconstructed algorithm. In addition, the proposed scheme is robust against the 'salt and pepper' noise and image cropping degradations.

  11. Quantum Computation with Neutral Atoms at Addressable Optical Lattice Sites and Atoms in Confined Geometries

    Science.gov (United States)

    2014-10-13

    Félix Riou, Aaron Reinhard, Laura A. Zundel, David S. Weiss. Spontaneous-emission- induced transition rates between atomic states in optical lattices...complementary technique to measure the hyperfine states at each lattice site. We developed a technique to cool atoms so that they are mostly in the vibrational ...28-Feb-2013 Approved for Public Release; Distribution Unlimited Final Report: Quantum Computation with Neutral Atoms at Addressable Optical Lattice

  12. Bragg optics computer codes for neutron scattering instrument design

    Energy Technology Data Exchange (ETDEWEB)

    Popovici, M.; Yelon, W.B.; Berliner, R.R. [Missouri Univ. Research Reactor, Columbia, MO (United States); Stoica, A.D. [Institute of Physics and Technology of Materials, Bucharest (Romania)

    1997-09-01

    Computer codes for neutron crystal spectrometer design, optimization and experiment planning are described. Phase space distributions, linewidths and absolute intensities are calculated by matrix methods in an extension of the Cooper-Nathans resolution function formalism. For modeling the Bragg reflection on bent crystals the lamellar approximation is used. Optimization is done by satisfying conditions of focusing in scattering and in real space, and by numerically maximizing figures of merit. Examples for three-axis and two-axis spectrometers are given.

  13. Single Photon Holographic Qudit Elements for Linear Optical Quantum Computing

    Science.gov (United States)

    2011-05-01

    volume hologram (VH) qubit logic gate. Our simulations were done both at Florida Atlantic University ( FAU ), and at AFRL during the summer by an FAU ...UG student (Chris Tison). We leveraged this AFRL grant and received approval from FAU to purchase a 7 teraflop GPU computer for student training...internship at AFRL. In order to continue this research the FAU Principal Investigator (PI) and United States (US) student were given H-token access to AFRL

  14. PREFACE: International Conference on Computing in High Energy and Nuclear Physics (CHEP'07)

    Science.gov (United States)

    Sobie, Randall; Tafirout, Reda; Thomson, Jana

    2007-07-01

    The 2007 International Conference on Computing in High Energy and Nuclear Physics (CHEP) was held on 2-7 September 2007 in Victoria, British Columbia, Canada. CHEP is a major series of international conferences for physicists and computing professionals from the High Energy and Nuclear Physics community, Computer Science and Information Technology. The CHEP conference provides an international forum to exchange information on computing experience and needs for the community, and to review recent, ongoing, and future activities. The CHEP'07 conference had close to 500 attendees with a program that included plenary sessions of invited oral presentations, a number of parallel sessions comprising oral and poster presentations, and an industrial exhibition. Conference tracks covered topics in Online Computing, Event Processing, Software Components, Tools and Databases, Software Tools and Information Systems, Computing Facilities, Production Grids and Networking, Grid Middleware and Tools, Distributed Data Analysis and Information Management and Collaborative Tools. The conference included a successful whale-watching excursion involving over 200 participants and a banquet at the Royal British Columbia Museum. The next CHEP conference will be held in Prague in March 2009. We would like thank the sponsors of the conference and the staff at the TRIUMF Laboratory and the University of Victoria who made the CHEP'07 a success. Randall Sobie and Reda Tafirout CHEP'07 Conference Chairs

  15. Computer Modeling and Simulation Evaluation of High Power LED Sources for Secondary Optical Design

    Institute of Scientific and Technical Information of China (English)

    SU Hong-dong; WANG Ya-jun; DONG Ji-yang; CHEN Zhong

    2007-01-01

    Proposed and demonstrated is a novel computer modeling method for high power light emitting diodes(LEDs). It contains geometrical structure and optical property of high power LED as well as LED dies definition with its spatial and angular distribution. Merits and non-merits of traditional modeling methods when applied to high power LEDs based on secondary optical design are discussed. Two commercial high power LEDs are simulated using the proposed computer modeling method. Correlation coefficient is proposed to compare and analyze the simulation results and manufacturing specifications. The source model is precisely demonstrated by obtaining above 99% in correlation coefficient with different surface incident angle intervals.

  16. Experimental study on optical image encryption with asymmetric double random phase and computer-generated hologram.

    Science.gov (United States)

    Xi, Sixing; Wang, Xiaolei; Song, Lipei; Zhu, Zhuqing; Zhu, Bowen; Huang, Shuai; Yu, Nana; Wang, Huaying

    2017-04-03

    Optical image encryption, especially double-random-phase-based, is of great interest in information security. In this work, we experimentally demonstrate the security and feasibility of optical image encryption with asymmetric double random phase and computer-generated hologram (CGH) by using spatial light modulator. First of all, the encrypted image modulated by asymmetric double random phase is numerically encoded into real-value CGH. Then, the encoded real-value CGH is loaded on the spatial light modulator and optically decrypted in self-designed experimental system. Experimental decryption results are in agreement with numerical calculations under the prober/mistaken phase keys condition. This optical decryption technology opens a window of optical encryption practical application and shows great potential for digital multimedia product copyright protection and holographic false trademark.

  17. Proceedings of the Third International Conference on Trends in Information, Telecommunication and Computing

    CERN Document Server

    2013-01-01

    The Proceedings of the Third International Conference on Trends in Information, Telecommunication and Computing provides in-depth understanding of the fundamental challenges in the fields of Computational Engineering, Computer, Power Electronics, Instrumentation, Control System, and Telecommunication Technology. This book provides a broad vision for the future of research in these fields with ideas on how to support these new technologies currently practice. Every submitted paper received a careful review from the committee and the final accept/reject decisions were made by the co-chairs on the bases of recommendations from the committee members.

  18. 2nd International Conference on Multiscale Computational Methods for Solids and Fluids

    CERN Document Server

    2016-01-01

    This volume contains the best papers presented at the 2nd ECCOMAS International Conference on Multiscale Computations for Solids and Fluids, held June 10-12, 2015. Topics dealt with include multiscale strategy for efficient development of scientific software for large-scale computations, coupled probability-nonlinear-mechanics problems and solution methods, and modern mathematical and computational setting for multi-phase flows and fluid-structure interaction. The papers consist of contributions by six experts who taught short courses prior to the conference, along with several selected articles from other participants dealing with complementary issues, covering both solid mechanics and applied mathematics. .

  19. 3rd International Symposium on Big Data and Cloud Computing Challenges

    CERN Document Server

    Neelanarayanan, V

    2016-01-01

    This proceedings volume contains selected papers that were presented in the 3rd International Symposium on Big data and Cloud Computing Challenges, 2016 held at VIT University, India on March 10 and 11. New research issues, challenges and opportunities shaping the future agenda in the field of Big Data and Cloud Computing are identified and presented throughout the book, which is intended for researchers, scholars, students, software developers and practitioners working at the forefront in their field. This book acts as a platform for exchanging ideas, setting questions for discussion, and sharing the experience in Big Data and Cloud Computing domain.

  20. EDITORIAL: The 19th International Conference on Optical Fibre Sensors, OFS-19 The 19th International Conference on Optical Fibre Sensors, OFS-19

    Science.gov (United States)

    Sampson, David D.; Jones, Julian D. C.; Tatam, Ralph P.

    2009-03-01

    OFS-19 was held in April 2008 in Perth, Australia, with Professor David Sampson (University of Western Australia) as General Chair assisted by Technical Programme Co-Chairs Professor Stephen Collins (Victoria University, Australia), Professor Kyunghwan Oh (Yonsei University, Korea) and Dr Ryozo Yamauchi (Fujikura Ltd, Japan). 'OFS-19' has once again affirmed the OFS series as the leading international conference for the optical fibre sensor community. Since its inception, in London in 1983, and under the leadership of an international steering committee independent of any learned society or professional institution, it has been held approximately every eighteen months. The venue nominally rotates from Europe, to the Americas, and thence to Asia and the Pacific. OFS-19 demonstrated the continuing vigour of the community, with some 240 papers presented, plus 8 tutorials; submissions and attendance were from 29 countries, with a little over half coming from the Asia-Pacific Region. In recent years, it has become a tradition to publish a post-conference special issue in Measurement Science and Technology, and these special issues offer a representative sample of the current status of the field. In the 25 years since OFS began, many of the early ideas and laboratory-based proof-of-principle experiments have successfully evolved into highly developed instrumentation systems and commercial products. One of the greatest success stories has been the optical fibre Bragg grating. Its exquisite intrinsic sensitivity to temperature and strain has led to an expanding niche in structural monitoring, especially in civil engineering. It has formed the 'beach-head' for penetration of optical fibre sensors into the oil and gas industry, initially in the harsh environment of down-hole monitoring. Latterly, it has paved the way for new applications of one of the earliest fibre optic sensors, the fibre hydrophone, which is now making its mark in sub-sea seismic surveying. Additionally

  1. Phase stabilization of Kerr frequency comb internally without nonlinear optical interferometry

    CERN Document Server

    Huang, S -W; Yang, J; Yu, M; Kwong, D -L; Wong, C W

    2016-01-01

    Optical frequency comb (OFC) technology has been the cornerstone for scientific breakthroughs such as precision frequency metrology, redefinition of time, extreme light-matter interaction, and attosecond sciences. While the current mode-locked laser-based OFC has had great success in extending the scientific frontier, its use in real-world applications beyond the laboratory setting remains an unsolved challenge. Microresonator-based OFCs, or Kerr frequency comb, have recently emerged as a candidate solution to the challenge because of their preferable size, weight, and power consumption (SWaP). On the other hand, the current phase stabilization technology requires either external optical references or power-demanding nonlinear processes, overturning the SWaP benefit of Kerr frequency combs. Introducing a new concept in phase control, here we report an internally phase stabilized Kerr frequency comb without the need of any optical references or nonlinear processes. We describe the comb generation analytically ...

  2. Efficient optical path folding by using multiple total internal reflections in a microcavity

    CERN Document Server

    Shinohara, Susumu; Fukushima, Takehiro; Harayama, Takahisa; Arai, Kenichi; Yoshimura, Kazuyuki

    2014-01-01

    We propose using an asymmetric resonant microcavity for the efficient generation of an optical path that is much longer than the diameter of the cavity. The path is formed along a star polygonal periodic orbit within the cavity, which is stable and confined by total internal reflection. We fabricated a semiconductor device based on this idea with an average diameter of 0.3 mm, and achieved a path length of 2.79 mm experimentally.

  3. 11th International Conference on P2P, Parallel, Grid, Cloud and Internet Computing

    CERN Document Server

    Barolli, Leonard; Amato, Flora

    2017-01-01

    P2P, Grid, Cloud and Internet computing technologies have been very fast established as breakthrough paradigms for solving complex problems by enabling aggregation and sharing of an increasing variety of distributed computational resources at large scale. The aim of this volume is to provide latest research findings, innovative research results, methods and development techniques from both theoretical and practical perspectives related to P2P, Grid, Cloud and Internet computing as well as to reveal synergies among such large scale computing paradigms. This proceedings volume presents the results of the 11th International Conference on P2P, Parallel, Grid, Cloud And Internet Computing (3PGCIC-2016), held November 5-7, 2016, at Soonchunhyang University, Asan, Korea.

  4. Fifth International Conference on Innovations in Bio-Inspired Computing and Applications

    CERN Document Server

    Abraham, Ajith; Snášel, Václav

    2014-01-01

    This volume of Advances in Intelligent Systems and Computing contains accepted papers presented at IBICA2014, the 5th International Conference on Innovations in Bio-inspired Computing and Applications. The aim of IBICA 2014 was to provide a platform for world research leaders and practitioners, to discuss the full spectrum of current theoretical developments, emerging technologies, and innovative applications of Bio-inspired Computing. Bio-inspired Computing remains to be one of the most exciting research areas, and it is continuously demonstrating exceptional strength in solving complex real life problems. The main driving force of the conference was to further explore the intriguing potential of Bio-inspired Computing. IBICA 2014 was held in Ostrava, Czech Republic and hosted by the VSB - Technical University of Ostrava.

  5. 4th International Conference on Innovations in Bio-Inspired Computing and Applications

    CERN Document Server

    Krömer, Pavel; Snášel, Václav

    2014-01-01

    This volume of Advances in Intelligent Systems and Computing contains accepted papers presented at IBICA2013, the 4th International Conference on Innovations in Bio-inspired Computing and Applications. The aim of IBICA 2013 was to provide a platform for world research leaders and practitioners, to discuss the full spectrum of current theoretical developments, emerging technologies, and innovative applications of Bio-inspired Computing. Bio-inspired Computing is currently one of the most exciting research areas, and it is continuously demonstrating exceptional strength in solving complex real life problems. The main driving force of the conference is to further explore the intriguing potential of Bio-inspired Computing. IBICA 2013 was held in Ostrava, Czech Republic and hosted by the VSB - Technical University of Ostrava.

  6. Functional Competency Development Model for Academic Personnel Based on International Professional Qualification Standards in Computing Field

    Science.gov (United States)

    Tumthong, Suwut; Piriyasurawong, Pullop; Jeerangsuwan, Namon

    2016-01-01

    This research proposes a functional competency development model for academic personnel based on international professional qualification standards in computing field and examines the appropriateness of the model. Specifically, the model consists of three key components which are: 1) functional competency development model, 2) blended training…

  7. International Association for the Study of Lung Cancer Computed Tomography Screening Workshop 2011 report

    DEFF Research Database (Denmark)

    Field, John K; Smith, Robert A; Aberle, Denise R;

    2011-01-01

    The International Association for the Study of Lung Cancer (IASLC) Board of Directors convened a computed tomography (CT) Screening Task Force to develop an IASLC position statement, after the National Cancer Institute press statement from the National Lung Screening Trial showed that lung cancer...

  8. International Association for the Study of Lung Cancer Computed Tomography Screening Workshop 2011 Report

    NARCIS (Netherlands)

    Field, John K.; Smith, Robert A.; Aberle, Denise R.; Oudkerk, Matthijs; Baldwin, David R.; Yankelevitz, David; Pedersen, Jesper Holst; Swanson, Scott James; Travis, William D.; Wisbuba, Ignacio I.; Noguchi, Masayuki; Mulshine, Jim L.

    2012-01-01

    The International Association for the Study of Lung Cancer (IASLC) Board of Directors convened a computed tomography (CT) Screening Task Force to develop an IASLC position statement, after the National Cancer Institute press statement from the National Lung Screening Trial showed that lung cancer de

  9. Highlights from the Third European International Society for Computational Biology (ISCB) Student Council Symposium 2014

    NARCIS (Netherlands)

    Francescatto, M.; Hermans, S.M.A.; Babaei, S.; Vicedo, E.; Borrel, A.; Meysman, P.

    2015-01-01

    In this meeting report, we give an overview of the talks, presentations and posters presented at the third European Symposium of the International Society for Computational Biology (ISCB) Student Council. The event was organized as a satellite meeting of the 13th European Conference for Computationa

  10. Long-term internal thoracic artery bypass graft patency and geometry assessed by multidetector computed tomography

    DEFF Research Database (Denmark)

    Zacho, Mette; Lilleoer, Nikolaj Thomas; Kelbaek, Henning

    2012-01-01

    The left internal thoracic artery (LITA) undergoes vascular remodelling when used for coronary artery bypass grafting. In this study we tested the hypothesis that the extent of the LITA remodelling late after coronary artery bypass grafting assessed by multidetector computed tomography is related...

  11. Foreword 3rd International Conference on Affective Computing and Intelligent Interaction - ACII 2009

    NARCIS (Netherlands)

    Cohn, Jeffrey; Cohn, Jeffrey; Nijholt, Antinus; Pantic, Maja

    2009-01-01

    It is a pleasure and an honor to have organized the Third International Conference on Affective Computing and Intelligent Interaction (ACII). The conference will be held from 10th – 12th September 2009 in Amsterdam, The Netherlands. The conference series is the premier forum for presenting research

  12. International Association for the Study of Lung Cancer Computed Tomography Screening Workshop 2011 Report

    NARCIS (Netherlands)

    Field, John K.; Smith, Robert A.; Aberle, Denise R.; Oudkerk, Matthijs; Baldwin, David R.; Yankelevitz, David; Pedersen, Jesper Holst; Swanson, Scott James; Travis, William D.; Wisbuba, Ignacio I.; Noguchi, Masayuki; Mulshine, Jim L.

    The International Association for the Study of Lung Cancer (IASLC) Board of Directors convened a computed tomography (CT) Screening Task Force to develop an IASLC position statement, after the National Cancer Institute press statement from the National Lung Screening Trial showed that lung cancer

  13. Internal combustion engines: Computer applications. (Latest citations from the EI Compendex plus database). Published Search

    Energy Technology Data Exchange (ETDEWEB)

    1993-10-01

    The bibliography contains citations concerning the application of computers and computerized simulations in the design, analysis, operation, and evaluation of various types of internal combustion engines and associated components and apparatus. Special attention is given to engine control and performance. (Contains a minimum of 67 citations and includes a subject term index and title list.)

  14. A Computer Vision System forLocating and Identifying Internal Log Defects Using CT Imagery

    Science.gov (United States)

    Dongping Zhu; Richard W. Conners; Frederick Lamb; Philip A. Araman

    1991-01-01

    A number of researchers have shown the ability of magnetic resonance imaging (MRI) and computer tomography (CT) imaging to detect internal defects in logs. However, if these devices are ever to play a role in the forest products industry, automatic methods for analyzing data from these devices must be developed. This paper reports research aimed at developing a...

  15. Using Two Types of Computer Algebra Systems to Solve Maxwell Optics Problems

    OpenAIRE

    Kulyabov, D. S.

    2016-01-01

    To synthesize Maxwell optics systems, the mathematical apparatus of tensor and vector analysis is generally employed. This mathematical apparatus implies executing a great number of simple stereotyped operations, which are adequately supported by computer algebra systems. In this paper, we distinguish between two stages of working with a mathematical model: model development and model usage. Each of these stages implies its own computer algebra system. As a model problem, we consider the prob...

  16. PREFACE: International Conference on Quantum Optics and Quantum Information (icQoQi) 2013

    Science.gov (United States)

    2014-11-01

    Quantum Information can be understood as being naturally derived from a new understanding of information theory when quantum systems become information carriers and quantum effects become non negligible. Experiments and the realization of various interesting phenomena in quantum information within the established field of quantum optics have been reported, which has provided a very convenient framework for the former. Together, quantum optics and quantum information are among the most exciting areas of interdisciplinary research in modern day science which cover a broad spectrum of topics, from the foundations of quantum mechanics and quantum information science to the introduction of new types of quantum technologies and metrology. The International Conference on Quantum Optics and Quantum Information (icQoQi) 2013 was organized by the Faculty of Science, International Islamic University Malaysia with the objective of bringing together leading academic scientists, researchers and scholars in the domain of interest from around the world to share their experiences and research results about all aspects of quantum optics and quantum information. While the event was organized on a somewhat modest scale, it was in fact a rather fruitful meeting for established researchers and students as well, especially for the local scene where the field is relatively new. We would therefore, like to thank the organizing committee, our advisors and all parties for having made this event successful and last but not least would extend our sincerest gratitude to IOP for publishing these selected papers from icQoQi2013 in Journal of Physics: Conference Series.

  17. Optical Computing. Organization of the 1993 Photonics Science Topical Meetings Held in Palm Springs, California on March 16 - 19, 1993. Technical Digest Series, Volume 7

    Science.gov (United States)

    1993-03-19

    Bruno W Acklin. Jirgen Jahns. AT&T Bell Laboratr-;. We pre- matrix as a photonic backplane, Michel Charier, Bruno Houssay . sent a specific example for...MASSIVELY PARALLEL COMPUTERS USING HOLOGRAPHIC MATRIX AS A PHOTONIC BACKPLANE M. Charrier, B. Houssay , T. Lemoine, S. Paineau - Thomson CSF - RCM Division 178...34International conference on Advances in Interconnection and Packaging" (2) C. Vergnolle, C. Sebillotte, B. Houssay , S. Paineau - "Optical Interconnection

  18. Computer-automated multi-disciplinary analysis and design optimization of internally cooled turbine blades

    Science.gov (United States)

    Martin, Thomas Joseph

    This dissertation presents the theoretical methodology, organizational strategy, conceptual demonstration and validation of a fully automated computer program for the multi-disciplinary analysis, inverse design and optimization of convectively cooled axial gas turbine blades and vanes. Parametric computer models of the three-dimensional cooled turbine blades and vanes were developed, including the automatic generation of discretized computational grids. Several new analysis programs were written and incorporated with existing computational tools to provide computer models of the engine cycle, aero-thermodynamics, heat conduction and thermofluid physics of the internally cooled turbine blades and vanes. A generalized information transfer protocol was developed to provide the automatic mapping of geometric and boundary condition data between the parametric design tool and the numerical analysis programs. A constrained hybrid optimization algorithm controlled the overall operation of the system and guided the multi-disciplinary internal turbine cooling design process towards the objectives and constraints of engine cycle performance, aerodynamic efficiency, cooling effectiveness and turbine blade and vane durability. Several boundary element computer programs were written to solve the steady-state non-linear heat conduction equation inside the internally cooled and thermal barrier-coated turbine blades and vanes. The boundary element method (BEM) did not require grid generation inside the internally cooled turbine blades and vanes, so the parametric model was very robust. Implicit differentiations of the BEM thermal and thereto-elastic analyses were done to compute design sensitivity derivatives faster and more accurately than via explicit finite differencing. A factor of three savings of computer processing time was realized for two-dimensional thermal optimization problems, and a factor of twenty was obtained for three-dimensional thermal optimization problems

  19. Computational challenges in atomic, molecular and optical physics.

    Science.gov (United States)

    Taylor, Kenneth T

    2002-06-15

    Six challenges are discussed. These are the laser-driven helium atom; the laser-driven hydrogen molecule and hydrogen molecular ion; electron scattering (with ionization) from one-electron atoms; the vibrational and rotational structure of molecules such as H(3)(+) and water at their dissociation limits; laser-heated clusters; and quantum degeneracy and Bose-Einstein condensation. The first four concern fundamental few-body systems where use of high-performance computing (HPC) is currently making possible accurate modelling from first principles. This leads to reliable predictions and support for laboratory experiment as well as true understanding of the dynamics. Important aspects of these challenges addressable only via a terascale facility are set out. Such a facility makes the last two challenges in the above list meaningfully accessible for the first time, and the scientific interest together with the prospective role for HPC in these is emphasized.

  20. Computer Vision Aided Measurement of Morphological Features in Medical Optics

    Directory of Open Access Journals (Sweden)

    Bogdana Bologa

    2010-09-01

    Full Text Available This paper presents a computer vision aided method for non invasive interupupillary (IPD distance measurement. IPD is a morphological feature requirement in any oftalmological frame prescription. A good frame prescription is highly dependent nowadays on accurate IPD estimation in order for the lenses to be eye strain free. The idea is to replace the ruler or the pupilometer with a more accurate method while keeping the patient eye free from any moving or gaze restrictions. The method proposed in this paper uses a video camera and a punctual light source in order to determine the IPD with under millimeter error. The results are compared against standard eye and object detection routines from literature.

  1. 6th International Conference on Innovations in Bio-Inspired Computing and Applications

    CERN Document Server

    Abraham, Ajith; Krömer, Pavel; Pant, Millie; Muda, Azah

    2016-01-01

    This Volume contains the papers presented during the 6th International Conference on Innovations in Bio-Inspired Computing and Applications IBICA 2015 which was held in Kochi, India during December 16-18, 2015. The 51 papers presented in this Volume were carefully reviewed and selected. The 6th International Conference IBICA 2015 has been organized to discuss the state-of-the-art as well as to address various issues in the growing research field of Bio-inspired Computing which is currently one of the most exciting research areas, and is continuously demonstrating exceptional strength in solving complex real life problems. The Volume will be a valuable reference to researchers, students and practitioners in the computational intelligence field.

  2. Considerations for the extension of coherent optical processors into the quantum computing regime

    Science.gov (United States)

    Young, Rupert C. D.; Birch, Philip M.; Chatwin, Chris R.

    2016-04-01

    Previously we have examined the similarities of the quantum Fourier transform to the classical coherent optical implementation of the Fourier transform (R. Young et al, Proc SPIE Vol 87480, 874806-1, -11). In this paper, we further consider how superposition states can be generated on coherent optical wave fronts, potentially allowing coherent optical processing hardware architectures to be extended into the quantum computing regime. In particular, we propose placing the pixels of a Spatial Light Modulator (SLM) individually in a binary superposition state and illuminating them with a coherent wave front from a conventional (but low intensity) laser source in order to make a so-called `interaction free' measurement. In this way, the quantum object, i.e. the individual pixels of the SLM in their superposition states, and the illuminating wavefront would become entangled. We show that if this were possible, it would allow the extension of coherent processing architectures into the quantum computing regime and we give an example of such a processor configured to recover one of a known set of images encrypted using the well-known coherent optical processing technique of employing a random Fourier plane phase encryption mask which classically requires knowledge of the corresponding phase conjugate key to decrypt the image. A quantum optical computer would allow interrogation of all possible phase masks in parallel and so immediate decryption.

  3. EDITORIAL: The 20th International Conference on Optical Fibre Sensors, OFS-20 The 20th International Conference on Optical Fibre Sensors, OFS-20

    Science.gov (United States)

    Culshaw, Brian; Ecke, Wolfgang; Jones, Julian; Tatam, Ralph; Willsch, Reinhardt

    2010-09-01

    Welcome to our special issue on fibre optic sensors. Fibre optic sensors were first suggested in the patent literature in the mid 1960s as an innovative means for making measurements. This proposed a surface finish measurement tool with high precision and resulted in an instrument that remains available today. Much has happened since, with significant innovation in the techniques through which light propagating whilst guided in a fibre can be unambiguously, repeatedly and predictably modulated in response to an external phenomenon. The technique offers not only the precision mentioned earlier but also inherent electromagnetic immunity, the capability to sense at long distances, light weight, small size and a multiplicity of network architectures, all of which can be interrogated from a single point. Even so, fibre sensors is a niche technology, attractive only when its very special features offer substantial user benefit. There are, however, many such niches exemplified in the electrical power supply industry, in gyroscopes for navigational instruments, in hydrophones and geophones. Then there are the distributed sensing architectures that enable useful measurements of pressure, strain and temperature fields affecting the optical properties of the fibre itself to map these parameter fields as a function of position along lengths of fibre to many tens of kilometres. The fibre sensing concept spawned its own research community, and the international conference on Optical Fibre Sensors first appeared in 1983 in London then emerged into a series travelling from Europe to the Americas and into the Asia-Pacific region. The 20th in the series took place in Edinburgh at the end of 2009 and this special issue of Measurement Science and Technology presents extended versions of some of the papers that first appeared at the conference. The science and technology of fibre sensing have evolved significantly over the history of the conference, drawing on developments in optical

  4. Dimensional quality control of Ti-Ni dental file by optical coordinate metrology and computed tomography

    DEFF Research Database (Denmark)

    Yagüe-Fabra, J.A.; Tosello, Guido; Ontiveros, S.

    2014-01-01

    Endodontic dental files usually present complex 3D geometries, which make the complete measurement of the component very challenging with conventional micro metrology tools. Computed Tomography (CT) can represent a suitable alternative solution to micro metrology tools based on optical and tactil...

  5. Gray-scale and color optical encryption based on computational ghost imaging

    Science.gov (United States)

    Tanha, Mehrdad; Kheradmand, Reza; Ahmadi-Kandjani, Sohrab

    2012-09-01

    We propose two approaches for optical encryption based on computational ghost imaging. These methods have the capability of encoding ghost images reconstructed from gray-scale images and colored objects. We experimentally demonstrate our approaches under eavesdropping in two different setups, thereby proving the robustness and simplicity thereof for encryption compared with previous algorithms.

  6. Computational Modeling of the Optical Rotation of Amino Acids: An "in Silico" Experiment for Physical Chemistry

    Science.gov (United States)

    Simpson, Scott; Autschbach, Jochen; Zurek, Eva

    2013-01-01

    A computational experiment that investigates the optical activity of the amino acid valine has been developed for an upper-level undergraduate physical chemistry laboratory course. Hybrid density functional theory calculations were carried out for valine to confirm the rule that adding a strong acid to a solution of an amino acid in the l…

  7. Computational Modeling of the Optical Rotation of Amino Acids: An "in Silico" Experiment for Physical Chemistry

    Science.gov (United States)

    Simpson, Scott; Autschbach, Jochen; Zurek, Eva

    2013-01-01

    A computational experiment that investigates the optical activity of the amino acid valine has been developed for an upper-level undergraduate physical chemistry laboratory course. Hybrid density functional theory calculations were carried out for valine to confirm the rule that adding a strong acid to a solution of an amino acid in the l…

  8. Computational high-resolution optical imaging of the living human retina

    Science.gov (United States)

    Shemonski, Nathan D.; South, Fredrick A.; Liu, Yuan-Zhi; Adie, Steven G.; Scott Carney, P.; Boppart, Stephen A.

    2015-07-01

    High-resolution in vivo imaging is of great importance for the fields of biology and medicine. The introduction of hardware-based adaptive optics (HAO) has pushed the limits of optical imaging, enabling high-resolution near diffraction-limited imaging of previously unresolvable structures. In ophthalmology, when combined with optical coherence tomography, HAO has enabled a detailed three-dimensional visualization of photoreceptor distributions and individual nerve fibre bundles in the living human retina. However, the introduction of HAO hardware and supporting software adds considerable complexity and cost to an imaging system, limiting the number of researchers and medical professionals who could benefit from the technology. Here we demonstrate a fully automated computational approach that enables high-resolution in vivo ophthalmic imaging without the need for HAO. The results demonstrate that computational methods in coherent microscopy are applicable in highly dynamic living systems.

  9. Computational chemistry modeling and design of photoswitchable alignment materials for optically addressable liquid crystal devices

    Science.gov (United States)

    Marshall, K. L.; Sekera, E. R.; Xiao, K.

    2015-09-01

    Photoalignment technology based on optically switchable "command surfaces" has been receiving increasing interest for liquid crystal optics and photonics device applications. Azobenzene compounds in the form of low-molar-mass, watersoluble salts deposited either directly on the substrate surface or after dispersion in a polymer binder have been almost exclusively employed for these applications, and ongoing research in the area follows a largely empirical materials design and development approach. Recent computational chemistry advances now afford unprecedented opportunities to develop predictive capabilities that will lead to new photoswitchable alignment layer materials with low switching energies, enhanced bistability, write/erase fatigue resistance, and high laser-damage thresholds. In the work described here, computational methods based on the density functional theory and time-dependent density functional theory were employed to study the impact of molecular structure on optical switching properties in photoswitchable methacrylate and acrylamide polymers functionalized with azobenzene and spiropyran pendants.

  10. All-optical quantum computing with a hybrid solid-state processing unit

    CERN Document Server

    Pei, Pei; Li, Chong

    2011-01-01

    We develop an architecture of hybrid quantum solid-state processing unit for universal quantum computing. The architecture allows distant and nonidentical solid-state qubits in distinct physical systems to interact and work collaboratively. All the quantum computing procedures are controlled by optical methods using classical fields and cavity QED. Our methods have prominent advantage of the insensitivity to dissipation process due to the virtual excitation of subsystems. Moreover, the QND measurements and state transfer for the solid-state qubits are proposed. The architecture opens promising perspectives for implementing scalable quantum computation in a broader sense that different solid systems can merge and be integrated into one quantum processor afterwards.

  11. Integrating Computing across the Curriculum: The Impact of Internal Barriers and Training Intensity on Computer Integration in the Elementary School Classroom

    Science.gov (United States)

    Coleman, LaToya O.; Gibson, Philip; Cotten, Shelia R.; Howell-Moroney, Michael; Stringer, Kristi

    2016-01-01

    This study examines the relationship between internal barriers, professional development, and computer integration outcomes among a sample of fourth- and fifth-grade teachers in an urban, low-income school district in the Southeastern United States. Specifically, we examine the impact of teachers' computer attitudes, computer anxiety, and computer…

  12. Hydration level is an internal variable for computing motivation to obtain water rewards in monkeys.

    Science.gov (United States)

    Minamimoto, Takafumi; Yamada, Hiroshi; Hori, Yukiko; Suhara, Tetsuya

    2012-05-01

    In the process of motivation to engage in a behavior, valuation of the expected outcome is comprised of not only external variables (i.e., incentives) but also internal variables (i.e., drive). However, the exact neural mechanism that integrates these variables for the computation of motivational value remains unclear. Besides, the signal of physiological needs, which serves as the primary internal variable for this computation, remains to be identified. Concerning fluid rewards, the osmolality level, one of the physiological indices for the level of thirst, may be an internal variable for valuation, since an increase in the osmolality level induces drinking behavior. Here, to examine the relationship between osmolality and the motivational value of a water reward, we repeatedly measured the blood osmolality level, while 2 monkeys continuously performed an instrumental task until they spontaneously stopped. We found that, as the total amount of water earned increased, the osmolality level progressively decreased (i.e., the hydration level increased) in an individual-dependent manner. There was a significant negative correlation between the error rate of the task (the proportion of trials with low motivation) and the osmolality level. We also found that the increase in the error rate with reward accumulation can be well explained by a formula describing the changes in the osmolality level. These results provide a biologically supported computational formula for the motivational value of a water reward that depends on the hydration level, enabling us to identify the neural mechanism that integrates internal and external variables.

  13. Proceedings 6th International Workshop on Computing with Terms and Graphs

    CERN Document Server

    Echahed, Rachid

    2011-01-01

    This volume contains the proceedings of the Sixth International Workshop on Computing with Terms and Graphs (TERMGRAPH 2011). The workshop took place in Saarbruecken, Germany, on April 2nd, 2011, as part of the fourteenth edition of the European Joint Conferences on Theory and Practice of Software (ETAPS 2011). Research in term and graph rewriting ranges from theoretical questions to practical issues. Computing with graphs handles the sharing of common subexpressions in a natural and seamless way, and improves the efficiency of computations in space and time. Sharing is ubiquitous in several research areas, for instance : the modelling of first- and higher-order term rewriting by (acyclic or cyclic) graph rewriting, the modelling of biological or chemical abstract machines, the implementation techniques of programming languages. Term graphs are also used in automated theorem proving and symbolic computation systems working on shared structures. The aim of this workshop is to bring together researchers working...

  14. Proceedings of the 2011 International Conference on Informatics, Cybernetics, and Computer Engineering

    CERN Document Server

    2012-01-01

    The volume includes a set of selected papers extended and revised from the International Conference on Informatics, Cybernetics, and Computer Engineering. An information system (IS) is any combination of information technology and people's activities using that technology to support operations, management.  Computer engineering is a discipline that integrates several fields of electrical engineering and computer science required to develop computer systems. ICCE 2011 Volume 2 is to provide a forum for researchers, educators, engineers, and government officials involved in the general areas of Information system and Software Engineering to disseminate their latest research results and exchange views on the future research directions of these fields. 81 high-quality papers are included in the volume. Each paper has been peer-reviewed by at least 2 program committee members and selected by the volume editor.

  15. 3th IEEE/ACIS International Conference on Computer and Information Science

    CERN Document Server

    2015-01-01

    This edited book presents scientific results of the 13th IEEE/ACIS International Conference on Computer and Information Science (ICIS 2014) which was held on June 4-6, 2014 in Taiyuan, China. The aim of this conference was to bring together researchers and scientists, businessmen and entrepreneurs, teachers, engineers, computer users, and students to discuss the numerous fields of computer science and to share their experiences and exchange new ideas and information in a meaningful way. Research results about all aspects (theory, applications and tools) of computer and information science, and to discuss the practical challenges encountered along the way and the solutions adopted to solve them. The conference organizers selected the best papers from those papers accepted for presentation at the conference.  The papers were chosen based on review scores submitted by members of the program committee, and underwent further rigorous rounds of review. This publication captures 14 of the conference’s most promis...

  16. 6th International Conference on Practical Applications of Computational Biology & Bioinformatics

    CERN Document Server

    Luscombe, Nicholas; Fdez-Riverola, Florentino; Rodríguez, Juan; Practical Applications of Computational Biology & Bioinformatics

    2012-01-01

    The growth in the Bioinformatics and Computational Biology fields over the last few years has been remarkable.. The analysis of the datasets of Next Generation Sequencing needs new algorithms and approaches from fields such as Databases, Statistics, Data Mining, Machine Learning, Optimization, Computer Science and Artificial Intelligence. Also Systems Biology has also been emerging as an alternative to the reductionist view that dominated biological research in the last decades. This book presents the results of the  6th International Conference on Practical Applications of Computational Biology & Bioinformatics held at University of Salamanca, Spain, 28-30th March, 2012 which brought together interdisciplinary scientists that have a strong background in the biological and computational sciences.

  17. Proceedings of the 2011 International Conference on Informatics, Cybernetics, and Computer Engineering

    CERN Document Server

    2012-01-01

    The volume includes a set of selected papers extended and revised from the International Conference on Informatics, Cybernetics, and Computer Engineering. Intelligent control is a class of control techniques, that use various AI computing approaches like neural networks, Bayesian probability, fuzzy logic, machine learning, evolutionary computation and genetic algorithms. Intelligent control can be divided into the following major sub-domains: Neural network control Bayesian control Fuzzy (logic) control Neuro-fuzzy control Expert Systems Genetic control Intelligent agents (Cognitive/Conscious control) New control techniques are created continuously as new models of intelligent behavior are created and computational methods developed to support them. Networks may be classified according to a wide variety of characteristics such as medium used to transport the data, communications protocol used, scale, topology, organizational scope, etc. ICCE 2011 Volume 1 is to provide a forum for researchers, educators, engi...

  18. Improved Optical Keyboard

    Science.gov (United States)

    Jamieson, R. S.

    1985-01-01

    Optical keyboard surfaces used in typewriters, computer terminals, and telephone inexpensively fabricated using stack of printed-circuit cards set in laminate. Internal laminations carry all illuminating and sensing light conductors to keys.

  19. 8th International Conference on Computer Science and its Applications (CSA-16) and the 11st International Conference on Ubiquitous Information Technologies and Applications (CUTE 2016)

    CERN Document Server

    Pan, Yi; Yi, Gangman; Loia, Vincenzo

    2017-01-01

    This book presents the combined proceedings of the 8th International Conference on Computer Science and its Applications (CSA-16) and the 11st International Conference on Ubiquitous Information Technologies and Applications (CUTE 2016), both held in Bangkok, Thailand, December 19 - 21, 2016. The aim of these two meetings was to promote discussion and interaction among academics, researchers and professionals in the field of ubiquitous computing technologies. These proceedings reflect the state-of-the-art in the development of computational methods, involving theory, algorithm, numerical simulation, error and uncertainty analysis and novel application of new processing techniques in engineering, science, and other disciplines related to ubiquitous computing.

  20. Computer Generated Hologram and Magneto-Optic Spatial Light Modulator for Optical Pattern Recognition.

    Science.gov (United States)

    1987-12-01

    must become familiar with the C programming language, a C compiler (Computer Innovations C86 is installed on the Zenith 248 which is interfaced with...a library. The - libraries C86S2S and TARGA must also be included since C86S2S contains all the C programming functions and the TARGA library

  1. PREFACE: International Workshop on Neutron Optics and Detectors (NOP&D 2013)

    Science.gov (United States)

    2014-07-01

    Every two-three years scientists involved in developments of neutron optics gather together for the International Workshop on Neutron Optics (NOP). Neutron optics has always been considered very important for the development of new neutron instrumentation. The limited brilliance of existing or future neutron sources requires the more effective usage of emitted neutrons. Indeed, improvements of the neutron optical system or an optimization of the neutron-optical tracts of instruments can result in a significant enhancement of their performance. This is especially important at present when the neutron scattering community is strongly engaged in developments of new instrumentation around the spallation neutron sources - SNS, ESS, J-PARC and Second Target Station at ISIS. In 2013 the workshop was organized by the Jülich Centre for Neutron Science of the Forschungszentrum Jülich GmbH and was held at the Conference Centre in Ismaning next to Munich on July 2-7, 2013 on the eve of the ICNS-2013 in Edinburg. It carried on the series of Neutron Optics workshops held in Villigen (1999, 2007), Tokyo (2004) and Alpe d'Huez (2010). This time it is also aimed to compliment the International Conference on Neutron Scattering in Edinburgh (ICNS-2013) by providing a platform for detailed discussions on the latest developments in the field of neutron optics. The scope of the workshop was extended to the neutron detectors (in a way similar to the NOP-2004 held in Tokyo) and was labelled as the International Workshop on Neutron Optics and Detectors, NOP&D-2013. However, in contrast to the Tokyo workshop, the focus of discussions was not the detector technologies (which are the subject of many dedicated meetings), rather than the use of detectors for the purpose of the design of modern instrumentation aiming to inform detector developers about real detectors requirements for new advanced instrumental concepts. The three-full-days workshop gathered a record number of participants, more

  2. 3rd International Conference on Computer Science, Applied Mathematics and Applications

    CERN Document Server

    Nguyen, Ngoc; Do, Tien

    2015-01-01

    This volume contains the extended versions of papers presented at the 3rd International Conference on Computer Science, Applied Mathematics and Applications (ICCSAMA 2015) held on 11-13 May, 2015 in Metz, France. The book contains 5 parts: 1. Mathematical programming and optimization: theory, methods and software, Operational research and decision making, Machine learning, data security, and bioinformatics, Knowledge information system, Software engineering. All chapters in the book discuss theoretical and algorithmic as well as practical issues connected with computation methods & optimization methods for knowledge engineering and machine learning techniques.  

  3. 2nd International Doctoral Symposium on Applied Computation and Security Systems

    CERN Document Server

    Cortesi, Agostino; Saeed, Khalid; Chaki, Nabendu

    2016-01-01

    The book contains the extended version of the works that have been presented and discussed in the Second International Doctoral Symposium on Applied Computation and Security Systems (ACSS 2015) held during May 23-25, 2015 in Kolkata, India. The symposium has been jointly organized by the AGH University of Science & Technology, Cracow, Poland; Ca’ Foscari University, Venice, Italy and University of Calcutta, India. The book is divided into volumes and presents dissertation works in the areas of Image Processing, Biometrics-based Authentication, Soft Computing, Data Mining, Next Generation Networking and Network Security, Remote Healthcare, Communications, Embedded Systems, Software Engineering and Service Engineering.

  4. 3rd International Conference on Innovations in Computer Science and Engineering

    CERN Document Server

    Sayal, Rishi; Rawat, Sandeep

    2016-01-01

    The book is a collection of high-quality peer-reviewed research papers presented at the third International Conference on Innovations in Computer Science and Engineering (ICICSE 2015) held at Guru Nanak Institutions, Hyderabad, India during 7 – 8 August 2015. The book discusses a wide variety of industrial, engineering and scientific applications of the emerging techniques. Researchers from academic and industry present their original work and exchange ideas, information, techniques and applications in the field of Communication, Computing, and Data Science and Analytics.

  5. 4th International Conference on Innovations in Computer Science and Engineering

    CERN Document Server

    Sayal, Rishi; Rawat, Sandeep

    2017-01-01

    The book is a collection of high-quality peer-reviewed research papers presented at the Fourth International Conference on Innovations in Computer Science and Engineering (ICICSE 2016) held at Guru Nanak Institutions, Hyderabad, India during 22 – 23 July 2016. The book discusses a wide variety of industrial, engineering and scientific applications of the emerging techniques. Researchers from academic and industry present their original work and exchange ideas, information, techniques and applications in the field of data science and analytics, artificial intelligence and expert systems, mobility, cloud computing, network security, and emerging technologies.

  6. First International Symposium on Applied Computing and Information Technology (ACIT 2013)

    CERN Document Server

    Applied Computing and Information Technology

    2014-01-01

    This book presents the selected results of the 1st International Symposium on Applied Computers and Information Technology (ACIT 2013) held on August 31 – September 4, 2013 in Matsue City, Japan, which brought together researchers, scientists, engineers, industry practitioners, and students to discuss all aspects of  Applied Computers & Information Technology, and its practical challenges. This book includes the best 12 papers presented at the conference, which were chosen based on review scores submitted by members of the program committee and underwent further rigorous rounds of review.  

  7. Diagnostic ability of barrett's index to detect dysthyroid optic neuropathy using multidetector computed tomography

    Directory of Open Access Journals (Sweden)

    Mário L. R. Monteiro

    2008-01-01

    Full Text Available OBJECTIVES: The objective of this study was to evaluate the ability of a muscular index (Barrett's Index, calculated with multidetector computed tomography, to detect dysthyroid optic neuropathy in patients with Graves' orbitopathy. METHODS: Thirty-six patients with Graves' orbitopathy were prospectively studied and submitted to neuro-ophthalmic evaluation and multidetector computed tomography scans of the orbits. Orbits were divided into two groups: those with and without dysthyroid optic neuropathy. Barrett's index was calculated as the percentage of the orbit occupied by muscles. Sensitivity and specificity were determined for several index values. RESULTS: Sixty-four orbits (19 with and 45 without dysthyroid optic neuropathy met the inclusion criteria for the study. The mean Barrett's index values (± SD were 64.47% ± 6.06% and 49.44% ± 10.94%in the groups with and without dysthyroid optic neuropathy, respectively (p60% should be carefully examined and followed for the development of dysthyroid optic neuropathy.

  8. Impact of Decoherence on Internal State Cooling using Optical Frequency Combs

    CERN Document Server

    Malinovskaya, S A

    2012-01-01

    We discuss femtosecond Raman type techniques to control molecular vibrations, which can be implemented for internal state cooling from Feshbach states with the use of optical frequency combs with and without modulation. The technique makes use of multiple two-photon resonances induced by optical frequencies present in the comb. It provides us with a useful tool to study the details of molecular dynamics at ultracold temperatures. In our theoretical model we take into account decoherence in the form of spontaneous emission and collisional dephasing in order to ascertain an accurate model of the population transfer in the three-level system. We analyze the effects of odd and even chirps of the optical frequency comb in the form of sine and cosine functions on the population transfer. We compare the effects of these chirps to the results attained with the standard optical frequency comb to see if they increase the population transfer to the final deeply bound state in the presence of decoherence. We also analyze...

  9. International Conference on Modern Mathematical Methods and High Performance Computing in Science and Technology

    CERN Document Server

    Srivastava, HM; Venturino, Ezio; Resch, Michael; Gupta, Vijay

    2016-01-01

    The book discusses important results in modern mathematical models and high performance computing, such as applied operations research, simulation of operations, statistical modeling and applications, invisibility regions and regular meta-materials, unmanned vehicles, modern radar techniques/SAR imaging, satellite remote sensing, coding, and robotic systems. Furthermore, it is valuable as a reference work and as a basis for further study and research. All contributing authors are respected academicians, scientists and researchers from around the globe. All the papers were presented at the international conference on Modern Mathematical Methods and High Performance Computing in Science & Technology (M3HPCST 2015), held at Raj Kumar Goel Institute of Technology, Ghaziabad, India, from 27–29 December 2015, and peer-reviewed by international experts. The conference provided an exceptional platform for leading researchers, academicians, developers, engineers and technocrats from a broad range of disciplines ...

  10. 1st International Conference on Opto-Electronics and Applied Optics

    CERN Document Server

    Bhattacharya, Indrani

    2015-01-01

    The Proceedings of First International Conference on Opto-Electronics and Applied Optics 2014, IEM OPTRONIX 2014 presents the research contributions presented in the conference by researchers from both India and abroad. Contributions from established scientists as well as students are included. The book is organized to enable easy access to various topics of interest.   The first part includes the Keynote addresses by Phillip Russell, Max Planck Institute of the Light Sciences, Erlangen, Germany and Lorenzo Pavesi, University of Trento, Italy.   The second part focuses on the Plenary Talks given by eminent scientists, namely, Azizur Rahman, City University London, London; Bishnu Pal, President, The Optical Society of India; Kamakhya Ghatak, National Institute of Technology, Agartala; Kehar Singh, Former Professor, India Institute of Technology Delhi; Mourad Zghal, SUPCOM, University of Carthage, Tunisia; Partha Roy Chaudhuri, IIT Kharagpur; S K. Bhadra, CSIR-Central Glass and Ceramic Research Institute, Kol...

  11. A Stochastic Approach for Blurred Image Restoration and Optical Flow Computation on Field Image Sequence

    Institute of Scientific and Technical Information of China (English)

    高文; 陈熙霖

    1997-01-01

    The blur in target images caused by camera vibration due to robot motion or hand shaking and by object(s) moving in the background scene is different to deal with in the computer vision system.In this paper,the authors study the relation model between motion and blur in the case of object motion existing in video image sequence,and work on a practical computation algorithm for both motion analysis and blut image restoration.Combining the general optical flow and stochastic process,the paper presents and approach by which the motion velocity can be calculated from blurred images.On the other hand,the blurred image can also be restored using the obtained motion information.For solving a problem with small motion limitation on the general optical flow computation,a multiresolution optical flow algoritm based on MAP estimation is proposed. For restoring the blurred image ,an iteration algorithm and the obtained motion velocity are used.The experiment shows that the proposed approach for both motion velocity computation and blurred image restoration works well.

  12. Quantum computers based on electron spins controlled by ultrafast off-resonant single optical pulses.

    Science.gov (United States)

    Clark, Susan M; Fu, Kai-Mei C; Ladd, Thaddeus D; Yamamoto, Yoshihisa

    2007-07-27

    We describe a fast quantum computer based on optically controlled electron spins in charged quantum dots that are coupled to microcavities. This scheme uses broadband optical pulses to rotate electron spins and provide the clock signal to the system. Nonlocal two-qubit gates are performed by phase shifts induced by electron spins on laser pulses propagating along a shared waveguide. Numerical simulations of this scheme demonstrate high-fidelity single-qubit and two-qubit gates with operation times comparable to the inverse Zeeman frequency.

  13. The symmetric MSD encoder for one-step adder of ternary optical computer

    Science.gov (United States)

    Kai, Song; LiPing, Yan

    2016-08-01

    The symmetric Modified Signed-Digit (MSD) encoding is important for achieving the one-step MSD adder of Ternary Optical Computer (TOC). The paper described the symmetric MSD encoding algorithm in detail, and developed its truth table which has nine rows and nine columns. According to the truth table, the state table was developed, and the optical-path structure and circuit-implementation scheme of the symmetric MSD encoder (SME) for one-step adder of TOC were proposed. Finally, a series of experiments were designed and performed. The observed results of the experiments showed that the scheme to implement SME was correct, feasible and efficient.

  14. Asia Federation Report on International Symposium on Grid Computing (ISGC) 2010

    Science.gov (United States)

    Grey, Francois; Lin, Simon C.

    This report provides an overview of developments in the Asia-Pacific region, based on presentations made at the International Symposium on Grid Computing 2010 (ISGC 2010), held 5-12 March at Academia Sinica, Taipei. The document includes a brief overview of the EUAsiaGrid project as well as progress reports by representatives of 13 Asian countries presented at ISGC 2010. In alphabetical order, these are: Australia, China, India, Indonesia, Japan, Malaysia, Pakistan, Philippines, Singapore, South Korea, Taiwan, Thailand and Vietnam.

  15. Asia Federation Report on International Symposium on Grid Computing 2009 (ISGC 2009)

    Science.gov (United States)

    Grey, Francois

    This report provides an overview of developments in the Asia-Pacific region, based on presentations made at the International Symposium on Grid Computing 2009 (ISGC 09), held 21-23 April. This document contains 14 sections, including a progress report on general Asia-EU Grid activities as well as progress reports by representatives of 13 Asian countries presented at ISGC 09. In alphabetical order, these are: Australia, China, India, Indonesia, Japan, Malaysia, Pakistan, Philippines, Singapore, South Korea, Taiwan, Thailand and Vietnam.

  16. OPTICAL SPECTRA OF CANDIDATE INTERNATIONAL CELESTIAL REFERENCE FRAME (ICRF) FLAT-SPECTRUM RADIO SOURCES

    Energy Technology Data Exchange (ETDEWEB)

    Titov, O.; Stanford, Laura M. [Geoscience Australia, P.O. Box 378, Canberra, ACT 2601 (Australia); Johnston, Helen M.; Hunstead, Richard W. [Sydney Institute for Astronomy, School of Physics, University of Sydney, NSW 2006 (Australia); Pursimo, T. [Nordic Optical Telescope, Nordic Optical Telescope Apartado 474E-38700 Santa Cruz de La Palma, Santa Cruz de Tenerife (Spain); Jauncey, David L. [CSIRO Astronomy and Space Science, ATNF and Research School of Astronomy and Astrophysics, Australian National University, Canberra, ACT 2611 (Australia); Maslennikov, K. [Central Astronomical Observatory at Pulkovo, Pulkovskoye Shosse, 65/1, 196140, St. Petersburg (Russian Federation); Boldycheva, A., E-mail: oleg.titov@ga.gov.au [Ioffe Physical Technical Institute, 26 Polytekhnicheskaya, St. Petersburg, 194021 (Russian Federation)

    2013-07-01

    Continuing our program of spectroscopic observations of International Celestial Reference Frame (ICRF) sources, we present redshifts for 120 quasars and radio galaxies. Data were obtained with five telescopes: the 3.58 m European Southern Observatory New Technology Telescope, the two 8.2 m Gemini telescopes, the 2.5 m Nordic Optical Telescope (NOT), and the 6.0 m Big Azimuthal Telescope of the Special Astrophysical Observatory in Russia. The targets were selected from the International VLBI Service for Geodesy and Astrometry candidate International Celestial Reference Catalog which forms part of an observational very long baseline interferometry (VLBI) program to strengthen the celestial reference frame. We obtained spectra of the potential optical counterparts of more than 150 compact flat-spectrum radio sources, and measured redshifts of 120 emission-line objects, together with 19 BL Lac objects. These identifications add significantly to the precise radio-optical frame tie to be undertaken by Gaia, due to be launched in 2013, and to the existing data available for analyzing source proper motions over the celestial sphere. We show that the distribution of redshifts for ICRF sources is consistent with the much larger sample drawn from Faint Images of the Radio Sky at Twenty cm (FIRST) and Sloan Digital Sky Survey, implying that the ultra-compact VLBI sources are not distinguished from the overall radio-loud quasar population. In addition, we obtained NOT spectra for five radio sources from the FIRST and NRAO VLA Sky Survey catalogs, selected on the basis of their red colors, which yielded three quasars with z > 4.

  17. PREFACE: 14th International Workshop on Advanced Computing and Analysis Techniques in Physics Research (ACAT 2011)

    Science.gov (United States)

    Teodorescu, Liliana; Britton, David; Glover, Nigel; Heinrich, Gudrun; Lauret, Jérôme; Naumann, Axel; Speer, Thomas; Teixeira-Dias, Pedro

    2012-06-01

    ACAT2011 This volume of Journal of Physics: Conference Series is dedicated to scientific contributions presented at the 14th International Workshop on Advanced Computing and Analysis Techniques in Physics Research (ACAT 2011) which took place on 5-7 September 2011 at Brunel University, UK. The workshop series, which began in 1990 in Lyon, France, brings together computer science researchers and practitioners, and researchers from particle physics and related fields in order to explore and confront the boundaries of computing and of automatic data analysis and theoretical calculation techniques. It is a forum for the exchange of ideas among the fields, exploring and promoting cutting-edge computing, data analysis and theoretical calculation techniques in fundamental physics research. This year's edition of the workshop brought together over 100 participants from all over the world. 14 invited speakers presented key topics on computing ecosystems, cloud computing, multivariate data analysis, symbolic and automatic theoretical calculations as well as computing and data analysis challenges in astrophysics, bioinformatics and musicology. Over 80 other talks and posters presented state-of-the art developments in the areas of the workshop's three tracks: Computing Technologies, Data Analysis Algorithms and Tools, and Computational Techniques in Theoretical Physics. Panel and round table discussions on data management and multivariate data analysis uncovered new ideas and collaboration opportunities in the respective areas. This edition of ACAT was generously sponsored by the Science and Technology Facility Council (STFC), the Institute for Particle Physics Phenomenology (IPPP) at Durham University, Brookhaven National Laboratory in the USA and Dell. We would like to thank all the participants of the workshop for the high level of their scientific contributions and for the enthusiastic participation in all its activities which were, ultimately, the key factors in the

  18. PREFACE: 15th International Workshop on Advanced Computing and Analysis Techniques in Physics Research (ACAT2013)

    Science.gov (United States)

    Wang, Jianxiong

    2014-06-01

    This volume of Journal of Physics: Conference Series is dedicated to scientific contributions presented at the 15th International Workshop on Advanced Computing and Analysis Techniques in Physics Research (ACAT 2013) which took place on 16-21 May 2013 at the Institute of High Energy Physics, Chinese Academy of Sciences, Beijing, China. The workshop series brings together computer science researchers and practitioners, and researchers from particle physics and related fields to explore and confront the boundaries of computing and of automatic data analysis and theoretical calculation techniques. This year's edition of the workshop brought together over 120 participants from all over the world. 18 invited speakers presented key topics on the universe in computer, Computing in Earth Sciences, multivariate data analysis, automated computation in Quantum Field Theory as well as computing and data analysis challenges in many fields. Over 70 other talks and posters presented state-of-the-art developments in the areas of the workshop's three tracks: Computing Technologies, Data Analysis Algorithms and Tools, and Computational Techniques in Theoretical Physics. The round table discussions on open-source, knowledge sharing and scientific collaboration stimulate us to think over the issue in the respective areas. ACAT 2013 was generously sponsored by the Chinese Academy of Sciences (CAS), National Natural Science Foundation of China (NFSC), Brookhaven National Laboratory in the USA (BNL), Peking University (PKU), Theoretical Physics Cernter for Science facilities of CAS (TPCSF-CAS) and Sugon. We would like to thank all the participants for their scientific contributions and for the en- thusiastic participation in all its activities of the workshop. Further information on ACAT 2013 can be found at http://acat2013.ihep.ac.cn. Professor Jianxiong Wang Institute of High Energy Physics Chinese Academy of Science Details of committees and sponsors are available in the PDF

  19. Generation of nearly 3D-unpolarized evanescent optical near fields using total internal reflection.

    Science.gov (United States)

    Hassinen, Timo; Popov, Sergei; Friberg, Ari T; Setälä, Tero

    2016-07-01

    We analyze the time-domain partial polarization of optical fields composed of two evanescent waves created in total internal reflection by random electromagnetic beams with orthogonal planes of incidence. We show that such a two-beam configuration enables to generate nearly unpolarized, genuine three-component (3D) near fields. This result complements earlier studies on spectral polarization, which state that at least three symmetrically propagating beams are required to produce a 3D-unpolarized near field. The degree of polarization of the near field can be controlled by adjusting the polarization states and mutual correlation of the incident beams.

  20. Comments on: Optical computation based on nonlinear total reflectional optical switch at the interface

    Indian Academy of Sciences (India)

    Y A Zaghloul

    2015-12-01

    As we read the paper by Jianqi Zhang and Huan Xu, Pramana – J. Phys. 72, 547 (2009), two issues became clear, that warranted writing this comment. First, the switch, which is the main building block of the devices, and which is used to route the signal, does not work as explained in Section 4.1. Accordingly, the optical router does not work as explained, either. In addition, the half adder does not work as explained and a completely different Truth Table is obtained. The full adder is left to the reader as an exercise. Secondly, the previously published work, which is closely related to the work reported, was not referenced or discussed. In the following paragraphs we discuss each issue in some detail to give the authors the opportunity to better explain their work and clear such issues.

  1. The Computer Book of the Internal Medicine Resident: competence acquisition and achievement of learning objectives.

    Science.gov (United States)

    Oristrell, J; Oliva, J C; Casanovas, A; Comet, R; Jordana, R; Navarro, M

    2014-01-01

    The Computer Book of the Internal Medicine resident (CBIMR) is a computer program that was validated to analyze the acquisition of competences in teams of Internal Medicine residents. To analyze the characteristics of the rotations during the Internal Medicine residency and to identify the variables associated with the acquisition of clinical and communication skills, the achievement of learning objectives and resident satisfaction. All residents of our service (n=20) participated in the study during a period of 40 months. The CBIMR consisted of 22 self-assessment questionnaires specific for each rotation, with items on services (clinical workload, disease protocolization, resident responsibilities, learning environment, service organization and teamwork) and items on educational outcomes (acquisition of clinical and communication skills, achievement of learning objectives, overall satisfaction). Associations between services features and learning outcomes were analyzed using bivariate and multivariate analysis. An intense clinical workload, high resident responsibilities and disease protocolization were associated with the acquisition of clinical skills. High clinical competence and teamwork were both associated with better communication skills. Finally, an adequate learning environment was associated with increased clinical competence, the achievement of educational goals and resident satisfaction. Potentially modifiable variables related with the operation of clinical services had a significant impact on the acquisition of clinical and communication skills, the achievement of educational goals, and resident satisfaction during the specialized training in Internal Medicine. Copyright © 2013 Elsevier España, S.L. All rights reserved.

  2. High-speed linear optics quantum computing using active feed-forward.

    Science.gov (United States)

    Prevedel, Robert; Walther, Philip; Tiefenbacher, Felix; Böhi, Pascal; Kaltenbaek, Rainer; Jennewein, Thomas; Zeilinger, Anton

    2007-01-04

    As information carriers in quantum computing, photonic qubits have the advantage of undergoing negligible decoherence. However, the absence of any significant photon-photon interaction is problematic for the realization of non-trivial two-qubit gates. One solution is to introduce an effective nonlinearity by measurements resulting in probabilistic gate operations. In one-way quantum computation, the random quantum measurement error can be overcome by applying a feed-forward technique, such that the future measurement basis depends on earlier measurement results. This technique is crucial for achieving deterministic quantum computation once a cluster state (the highly entangled multiparticle state on which one-way quantum computation is based) is prepared. Here we realize a concatenated scheme of measurement and active feed-forward in a one-way quantum computing experiment. We demonstrate that, for a perfect cluster state and no photon loss, our quantum computation scheme would operate with good fidelity and that our feed-forward components function with very high speed and low error for detected photons. With present technology, the individual computational step (in our case the individual feed-forward cycle) can be operated in less than 150 ns using electro-optical modulators. This is an important result for the future development of one-way quantum computers, whose large-scale implementation will depend on advances in the production and detection of the required highly entangled cluster states.

  3. Highlights from the 6th International Society for Computational Biology Student Council Symposium at the 18th Annual International Conference on Intelligent Systems for Molecular Biology

    NARCIS (Netherlands)

    Klijn, C.N.; Michaut, M.; Abeel, T.

    2010-01-01

    This meeting report gives an overview of the keynote lectures and a selection of the student oral and poster presentations at the 6th International Society for Computational Biology Student Council Symposium that was held as a precursor event to the annual international conference on Intelligent Sys

  4. International Symposium on Computational Electronics—Physical Modeling, Mathematical Theory, and Numerical Algorithm

    Science.gov (United States)

    Li, Yiming

    2007-12-01

    This symposium is an open forum for discussion on the current trends and future directions of physical modeling, mathematical theory, and numerical algorithm in electrical and electronic engineering. The goal is for computational scientists and engineers, computer scientists, applied mathematicians, physicists, and researchers to present their recent advances and exchange experience. We welcome contributions from researchers of academia and industry. All papers to be presented in this symposium have carefully been reviewed and selected. They include semiconductor devices, circuit theory, statistical signal processing, design optimization, network design, intelligent transportation system, and wireless communication. Welcome to this interdisciplinary symposium in International Conference of Computational Methods in Sciences and Engineering (ICCMSE 2007). Look forward to seeing you in Corfu, Greece!

  5. Proceedings of the Third International Conference on Intelligent Human Computer Interaction

    CERN Document Server

    Pokorný, Jaroslav; Snášel, Václav; Abraham, Ajith

    2013-01-01

    The Third International Conference on Intelligent Human Computer Interaction 2011 (IHCI 2011) was held at Charles University, Prague, Czech Republic from August 29 - August 31, 2011. This conference was third in the series, following IHCI 2009 and IHCI 2010 held in January at IIIT Allahabad, India. Human computer interaction is a fast growing research area and an attractive subject of interest for both academia and industry. There are many interesting and challenging topics that need to be researched and discussed. This book aims to provide excellent opportunities for the dissemination of interesting new research and discussion about presented topics. It can be useful for researchers working on various aspects of human computer interaction. Topics covered in this book include user interface and interaction, theoretical background and applications of HCI and also data mining and knowledge discovery as a support of HCI applications.

  6. 4th International Conference on Frontiers in Intelligent Computing : Theory and Applications

    CERN Document Server

    Pal, Tandra; Kar, Samarjit; Satapathy, Suresh; Mandal, Jyotsna

    2016-01-01

    The proceedings of the 4th International Conference on Frontiers in Intelligent Computing: Theory and Applications 2015 (FICTA 2015) serves as the knowledge centre not only for scientists and researchers in the field of intelligent computing but also for students of post-graduate level in various engineering disciplines. The book covers a comprehensive overview of the theory, methods, applications and tools of Intelligent Computing. Researchers are now working in interdisciplinary areas and the proceedings of FICTA 2015 plays a major role to accumulate those significant works in one arena. The chapters included in the proceedings inculcates both theoretical as well as practical aspects of different areas like Nature Inspired Algorithms, Fuzzy Systems, Data Mining, Signal Processing, Image processing, Text Processing, Wireless Sensor Networks, Network Security and Cellular Automata. .

  7. PREFACE: International conference on Computer Simulation in Physics and beyond (CSP2015)

    Science.gov (United States)

    2016-02-01

    The International conference on Computer Simulations in Physics and beyond (CSP2015) was held from 6-10 September 2015 at the campus of the Moscow Institute for Electronics and Mathematics (MIEM), National Research University Higher School of Economics, Moscow. Computer simulations are in increasingly popular tool for scientific research, supplementing experimental and analytical research. The main goal of the conference is contributing to the development of methods and algorithms which take into account trends in hardware development, which may help with intensive research. The conference also allowed senior scientists and students to have the opportunity to speak each other and exchange ideas and views on the developments in the area of high-performance computing in science. We would like to take this opportunity to thank our sponsors: the Russian Foundation for Basic Research, Federal Agency of Scientific Organizations, and Higher School of Economics.

  8. 1st International Conference on Computational Advancement in Communication Circuits and Systems

    CERN Document Server

    Dalapati, Goutam; Banerjee, P; Mallick, Amiya; Mukherjee, Moumita

    2015-01-01

    This book comprises the proceedings of 1st International Conference on Computational Advancement in Communication Circuits and Systems (ICCACCS 2014) organized by Narula Institute of Technology under the patronage of JIS group, affiliated to West Bengal University of Technology. The conference was supported by Technical Education Quality Improvement Program (TEQIP), New Delhi, India and had technical collaboration with IEEE Kolkata Section, along with publication partner by Springer. The book contains 62 refereed papers that aim to highlight new theoretical and experimental findings in the field of Electronics and communication engineering including interdisciplinary fields like Advanced Computing, Pattern Recognition and Analysis, Signal and Image Processing. The proceedings cover the principles, techniques and applications in microwave & devices, communication & networking, signal & image processing, and computations & mathematics & control. The proceedings reflect the conference’s emp...

  9. 11th International Conference on Monte Carlo and Quasi-Monte Carlo Methods in Scientific Computing

    CERN Document Server

    Nuyens, Dirk

    2016-01-01

    This book presents the refereed proceedings of the Eleventh International Conference on Monte Carlo and Quasi-Monte Carlo Methods in Scientific Computing that was held at the University of Leuven (Belgium) in April 2014. These biennial conferences are major events for Monte Carlo and quasi-Monte Carlo researchers. The proceedings include articles based on invited lectures as well as carefully selected contributed papers on all theoretical aspects and applications of Monte Carlo and quasi-Monte Carlo methods. Offering information on the latest developments in these very active areas, this book is an excellent reference resource for theoreticians and practitioners interested in solving high-dimensional computational problems, arising, in particular, in finance, statistics and computer graphics.

  10. 12th ACIS/IEEE International Conference on Computer Science and Information Science

    CERN Document Server

    2013-01-01

    This edited book presents scientific results of the 12th IEEE/ACIS International Conference on Computer and Information Science (ICIS 2013) which was held on June 16-20, 2013 in Toki Messe, Niigata, Japan. The aim of this conference was to bring together scientists, engineers, computer users, and students to share their experiences and exchange new ideas, research results about all aspects (theory, applications and tools) of computer and information science, and to discuss the practical challenges encountered along the way and the solutions adopted to solve them The conference organizers selected the best 20 papers from those papers accepted for presentation at the conference. The papers were chosen based on review scores submitted by members of the program committee, and underwent further rigorous rounds of review.    

  11. 8th International Workshop on Parallel Tools for High Performance Computing

    CERN Document Server

    Gracia, José; Knüpfer, Andreas; Resch, Michael; Nagel, Wolfgang

    2015-01-01

    Numerical simulation and modelling using High Performance Computing has evolved into an established technique in academic and industrial research. At the same time, the High Performance Computing infrastructure is becoming ever more complex. For instance, most of the current top systems around the world use thousands of nodes in which classical CPUs are combined with accelerator cards in order to enhance their compute power and energy efficiency. This complexity can only be mastered with adequate development and optimization tools. Key topics addressed by these tools include parallelization on heterogeneous systems, performance optimization for CPUs and accelerators, debugging of increasingly complex scientific applications, and optimization of energy usage in the spirit of green IT. This book represents the proceedings of the 8th International Parallel Tools Workshop, held October 1-2, 2014 in Stuttgart, Germany – which is a forum to discuss the latest advancements in the parallel tools.

  12. 4th International Conference on Computer Science, Applied Mathematics and Applications

    CERN Document Server

    Do, Tien; Thi, Hoai; Nguyen, Ngoc

    2016-01-01

    This proceedings consists of 20 papers which have been selected and invited from the submissions to the 4th International Conference on Computer Science, Applied Mathematics and Applications (ICCSAMA 2016) held on 2-3 May, 2016 in Laxenburg, Austria. The conference is organized into 5 sessions: Advanced Optimization Methods and Their Applications, Models for ICT applications, Topics on discrete mathematics, Data Analytic Methods and Applications and Feature Extractio, respectively. All chapters in the book discuss theoretical and practical issues connected with computational methods and optimization methods for knowledge engineering. The editors hope that this volume can be useful for graduate and Ph.D. students and researchers in Applied Sciences, Computer Science and Applied Mathematics. .

  13. Proceedings of the 2011 International Conference on Informatics, Cybernetics, and Computer Engineering

    CERN Document Server

    2012-01-01

    This volume includes a set of selected papers extended and revised from the International Conference on Informatics, Cybernetics, and Computer Engineering. A computer network is a collection of computers and devices interconnected by communications channels that facilitate communications and allows sharing of resources and information among interconnected devices. Networks may be classified according to a wide variety of characteristics such as medium used to transport the data, communications protocol used, scale, topology, organizational scope, etc. Electronics engineering is an engineering discipline where non-linear and active electrical components such as electron tubes, and semiconductor devices, especially transistors, diodes and integrated circuits, are utilized to design electronic circuits, devices and systems, typically also including passive electrical components and based on printed circuit boards. ICCE 2011 Volume 3 is to provide a forum for researchers, educators, engineers, and government offi...

  14. First international comparison of fountain primary frequency standards via a long distance optical fiber link

    Science.gov (United States)

    Guéna, J.; Weyers, S.; Abgrall, M.; Grebing, C.; Gerginov, V.; Rosenbusch, P.; Bize, S.; Lipphardt, B.; Denker, H.; Quintin, N.; Raupach, S. M. F.; Nicolodi, D.; Stefani, F.; Chiodo, N.; Koke, S.; Kuhl, A.; Wiotte, F.; Meynadier, F.; Camisard, E.; Chardonnet, C.; Le Coq, Y.; Lours, M.; Santarelli, G.; Amy-Klein, A.; Le Targat, R.; Lopez, O.; Pottie, P. E.; Grosche, G.

    2017-06-01

    We report on the first comparison of distant caesium fountain primary frequency standards (PFSs) via an optical fiber link. The 1415 km long optical link connects two PFSs at LNE-SYRTE (Laboratoire National de métrologie et d’Essais—SYstème de Références Temps-Espace) in Paris (France) with two at PTB (Physikalisch-Technische Bundesanstalt) in Braunschweig (Germany). For a long time, these PFSs have been major contributors to accuracy of the International Atomic Time (TAI), with stated accuracies of around 3× {{10}-16} . They have also been the references for a number of absolute measurements of clock transition frequencies in various optical frequency standards in view of a future redefinition of the second. The phase coherent optical frequency transfer via a stabilized telecom fiber link enables far better resolution than any other means of frequency transfer based on satellite links. The agreement for each pair of distant fountains compared is well within the combined uncertainty of a few 10-16 for all the comparisons, which fully supports the stated PFSs’ uncertainties. The comparison also includes a rubidium fountain frequency standard participating in the steering of TAI and enables a new absolute determination of the 87Rb ground state hyperfine transition frequency with an uncertainty of 3.1× {{10}-16} . This paper is dedicated to the memory of André Clairon, who passed away on 24 December 2015, for his pioneering and long-lasting efforts in atomic fountains. He also pioneered optical links from as early as 1997.

  15. Highlights from the Fourth International Society for Computational Biology Student Council Symposium at the Sixteenth Annual International Conference on Intelligent Systems for Molecular Biology

    Directory of Open Access Journals (Sweden)

    Gehlenborg Nils

    2008-10-01

    Full Text Available Abstract In this meeting report we give an overview of the talks and presentations from the Fourth International Society for Computational Biology (ISCB Student Council Symposium held as part of the annual Intelligent Systems for Molecular Biology (ISMB conference in Toronto, Canada. Furthermore, we detail the role of the Student Council (SC as an international student body in organizing this symposium series in the context of large, international conferences.

  16. Simulation and Noise Analysis of Multimedia Transmission in Optical CDMA Computer Networks

    Directory of Open Access Journals (Sweden)

    Nasaruddin

    2009-11-01

    Full Text Available This paper simulates and analyzes noise of multimedia transmission in a flexible optical code division multiple access (OCDMA computer network with different quality of service (QoS requirements. To achieve multimedia transmission in OCDMA, we have proposed strict variable-weight optical orthogonal codes (VW-OOCs, which can guarantee the smallest correlation value of one by the optimal design. In developing multimedia transmission for computer network, a simulation tool is essential in analyzing the effectiveness of various transmissions of services. In this paper, implementation models are proposed to analyze the multimedia transmission in the representative of OCDMA computer networks by using MATLAB simulink tools. Simulation results of the models are discussed including spectrums outputs of transmitted signals, superimposed signals, received signals, and eye diagrams with and without noise. Using the proposed models, multimedia OCDMA computer network using the strict VW-OOC is practically evaluated. Furthermore, system performance is also evaluated by considering avalanche photodiode (APD noise and thermal noise. The results show that the system performance depends on code weight, received laser power, APD noise, and thermal noise which should be considered as important parameters to design and implement multimedia transmission in OCDMA computer networks.

  17. Simulation and Noise Analysis of Multimedia Transmission in Optical CDMA Computer Networks

    Directory of Open Access Journals (Sweden)

    Nasaruddin Nasaruddin

    2013-09-01

    Full Text Available This paper simulates and analyzes noise of multimedia transmission in a flexible optical code division multiple access (OCDMA computer network with different quality of service (QoS requirements. To achieve multimedia transmission in OCDMA, we have proposed strict variable-weight optical orthogonal codes (VW-OOCs, which can guarantee the smallest correlation value of one by the optimal design. In developing multimedia transmission for computer network, a simulation tool is essential in analyzing the effectiveness of various transmissions of services. In this paper, implementation models are proposed to analyze the multimedia transmission in the representative of OCDMA computer networks by using MATLAB simulink tools. Simulation results of the models are discussed including spectrums outputs of transmitted signals, superimposed signals, received signals, and eye diagrams with and without noise. Using the proposed models, multimedia OCDMA computer network using the strict VW-OOC is practically evaluated. Furthermore, system performance is also evaluated by considering avalanche photodiode (APD noise and thermal noise. The results show that the system performance depends on code weight, received laser power, APD noise, and thermal noise which should be considered as important parameters to design and implement multimedia transmission in OCDMA computer networks.

  18. Marginal and internal analysis of preheated dental fissure-sealing materials using optical coherence tomography.

    Science.gov (United States)

    Borges, Boniek Castillo Dutra; de Assunção, Isauremi Vieira; de Aquino, Célia Avani; de Melo Monteiro, Gabriela Queiroz; Gomes, Anderson Stevens Leonidas

    2016-02-01

    This study aimed to evaluate the influence of pre-photoactivation temperature on the marginal and internal integrity (occurrence of voids) of fissure-sealing materials on occlusal fissures using optical coherence tomography (OCT). Occlusal fissures of 40 human third molars were sealed using a resin-based fissure sealant (Fluroshield) and a flowable composite (Permaflo) photoactivated at 68 °C (preheated) or at room temperature (25 °C) (n=10). After sealing, the teeth were subjected to thermocycling (500 cycles, 5-55 °C) and 14 days of pH cycling (demineralisation for 6 hours/day and remineralisation for 18 hours/day). The occlusal surfaces were scanned in a buccolingual direction, and 20 tomographic images parallel to the long axis of each tooth were obtained. Images presenting marginal gaps and internal voids were counted and statistically analysed using analysis of variance and Tukey's test (Pinternal voids than the resin-based sealant. Preheated materials had a lower percentage of gaps and internal voids than the materials at room temperature. Therefore, preheated flowable composite provided the best marginal sealing of fissures, and internal homogeneity of the material. © 2015 FDI World Dental Federation.

  19. Optical image encryption based on binary Fourier transform computer-generated hologram and pixel scrambling technology

    Science.gov (United States)

    Wang, Yong-Ying; Wang, Yu-Rong; Wang, Yong; Li, Hui-Juan; Sun, Wen-Jia

    2007-07-01

    A new method of optical image encryption with binary Fourier transform computer-generated hologram (CGH) and pixel-scrambling technology is presented. In this method, the orders of the pixel scrambling, as well as the encrypted image, are used as the keys to decrypt the original image. Therefore, higher security is achieved. Furthermore, the encrypted image is binary, so it is easy to be fabricated and robust against noise and distortion. Computer simulation results are given to verify the feasibility of this method and its robustness against occlusion and additional noise.

  20. Computational Approach for Studying Optical Properties of DNA Systems in Solution

    DEFF Research Database (Denmark)

    Nørby, Morten Steen; Svendsen, Casper Steinmann; Olsen, Jógvan Magnus Haugaard

    2016-01-01

    In this paper we present a study of the methodological aspects regarding calculations of optical properties for DNA systems in solution. Our computational approach will be built upon a fully polarizable QM/MM/Continuum model within a damped linear response theory framework. In this approach...... the environment is given a highly advanced description in terms of the electrostatic potential through the polarizable embedding model. Furthermore, bulk solvent effects are included in an efficient manner through a conductor-like screening model. With the aim of reducing the computational cost we develop a set...... of averaged partial charges and distributed isotropic dipole-dipole polarizabilities for DNA suitable for describing the classical region in ground-state and excited-state calculations. Calculations of the UV-spectrum of the 2-aminopurine optical probe embedded in a DNA double helical structure are presented...

  1. Integration of highly probabilistic sources into optical quantum architectures: perpetual quantum computation

    CERN Document Server

    Devitt, Simon J; Munro, William J; Nemoto, Kae

    2011-01-01

    In this paper we introduce a design for an optical topological cluster state computer constructed exclusively from a single quantum component. Unlike previous efforts we eliminate the need for on demand, high fidelity photon sources and detectors and replace them with the same device utilised to create photon/photon entanglement. This introduces highly probabilistic elements into the optical architecture while maintaining complete specificity of the structure and operation for a large scale computer. Photons in this system are continually recycled back into the preparation network, allowing for a arbitrarily deep 3D cluster to be prepared using a comparatively small number of photonic qubits and consequently the elimination of high frequency, deterministic photon sources.

  2. PREFACE: 16th International workshop on Advanced Computing and Analysis Techniques in physics research (ACAT2014)

    Science.gov (United States)

    Fiala, L.; Lokajicek, M.; Tumova, N.

    2015-05-01

    This volume of the IOP Conference Series is dedicated to scientific contributions presented at the 16th International Workshop on Advanced Computing and Analysis Techniques in Physics Research (ACAT 2014), this year the motto was ''bridging disciplines''. The conference took place on September 1-5, 2014, at the Faculty of Civil Engineering, Czech Technical University in Prague, Czech Republic. The 16th edition of ACAT explored the boundaries of computing system architectures, data analysis algorithmics, automatic calculations, and theoretical calculation technologies. It provided a forum for confronting and exchanging ideas among these fields, where new approaches in computing technologies for scientific research were explored and promoted. This year's edition of the workshop brought together over 140 participants from all over the world. The workshop's 16 invited speakers presented key topics on advanced computing and analysis techniques in physics. During the workshop, 60 talks and 40 posters were presented in three tracks: Computing Technology for Physics Research, Data Analysis - Algorithms and Tools, and Computations in Theoretical Physics: Techniques and Methods. The round table enabled discussions on expanding software, knowledge sharing and scientific collaboration in the respective areas. ACAT 2014 was generously sponsored by Western Digital, Brookhaven National Laboratory, Hewlett Packard, DataDirect Networks, M Computers, Bright Computing, Huawei and PDV-Systemhaus. Special appreciations go to the track liaisons Lorenzo Moneta, Axel Naumann and Grigory Rubtsov for their work on the scientific program and the publication preparation. ACAT's IACC would also like to express its gratitude to all referees for their work on making sure the contributions are published in the proceedings. Our thanks extend to the conference liaisons Andrei Kataev and Jerome Lauret who worked with the local contacts and made this conference possible as well as to the program

  3. Physics education through computational tools: the case of geometrical and physical optics

    Science.gov (United States)

    Rodríguez, Y.; Santana, A.; Mendoza, L. M.

    2013-09-01

    Recently, with the development of more powerful and accurate computational tools, the inclusion of new didactic materials in the classroom is known to have increased. However, the form in which these materials can be used to enhance the learning process is still under debate. Many different methodologies have been suggested for constructing new relevant curricular material and, among them, just-in-time teaching (JiTT) has arisen as an effective and successful way to improve the content of classes. In this paper, we will show the implemented pedagogic strategies for the courses of geometrical and optical physics for students of optometry. Thus, the use of the GeoGebra software for the geometrical optics class and the employment of new in-house software for the physical optics class created using the high-level programming language Python is shown with the corresponding activities developed for each of these applets.

  4. Scalable photonic quantum computing assisted by quantum-dot spin in double-sided optical microcavity.

    Science.gov (United States)

    Wei, Hai-Rui; Deng, Fu-Guo

    2013-07-29

    We investigate the possibility of achieving scalable photonic quantum computing by the giant optical circular birefringence induced by a quantum-dot spin in a double-sided optical microcavity as a result of cavity quantum electrodynamics. We construct a deterministic controlled-not gate on two photonic qubits by two single-photon input-output processes and the readout on an electron-medium spin confined in an optical resonant microcavity. This idea could be applied to multi-qubit gates on photonic qubits and we give the quantum circuit for a three-photon Toffoli gate. High fidelities and high efficiencies could be achieved when the side leakage to the cavity loss rate is low. It is worth pointing out that our devices work in both the strong and the weak coupling regimes.

  5. Time-Of-Flight Camera, Optical Tracker and Computed Tomography in Pairwise Data Registration.

    Directory of Open Access Journals (Sweden)

    Bartlomiej Pycinski

    Full Text Available A growing number of medical applications, including minimal invasive surgery, depends on multi-modal or multi-sensors data processing. Fast and accurate 3D scene analysis, comprising data registration, seems to be crucial for the development of computer aided diagnosis and therapy. The advancement of surface tracking system based on optical trackers already plays an important role in surgical procedures planning. However, new modalities, like the time-of-flight (ToF sensors, widely explored in non-medical fields are powerful and have the potential to become a part of computer aided surgery set-up. Connection of different acquisition systems promises to provide a valuable support for operating room procedures. Therefore, the detailed analysis of the accuracy of such multi-sensors positioning systems is needed.We present the system combining pre-operative CT series with intra-operative ToF-sensor and optical tracker point clouds. The methodology contains: optical sensor set-up and the ToF-camera calibration procedures, data pre-processing algorithms, and registration technique. The data pre-processing yields a surface, in case of CT, and point clouds for ToF-sensor and marker-driven optical tracker representation of an object of interest. An applied registration technique is based on Iterative Closest Point algorithm.The experiments validate the registration of each pair of modalities/sensors involving phantoms of four various human organs in terms of Hausdorff distance and mean absolute distance metrics. The best surface alignment was obtained for CT and optical tracker combination, whereas the worst for experiments involving ToF-camera.The obtained accuracies encourage to further develop the multi-sensors systems. The presented substantive discussion concerning the system limitations and possible improvements mainly related to the depth information produced by the ToF-sensor is useful for computer aided surgery developers.

  6. 5th International Symposium on Experimental Mechanics (5-ISEM) and 9th Symposium on Optics in Industry

    CERN Document Server

    Furlong, Cosme; Barrientos, Bernardino; Pryputniewicz, Ryszard

    2017-01-01

    This book contains papers of the 5th International Symposium on Experimental Mechanics (5-ISEM) and the 9th Symposium on Optics in Industry (9-SOI), whose general theme is Emerging Challenges for Experimental Mechanics in Energy and Environmental Applications. These symposia are organized by Centro de Investigaciones en Optica (CIO) and Mexican Academy for Optics (AMO), under the sponsorship of the Society of Experimental Mechanics (SEM) and other national and international Organizations; Symposia are interdisciplinary forums for engineers, technicians, researchers and managers involved in all fields of Optics, Opto-mechatronics, Mechanics and Mechanical Engineering. · Addresses a broad readership including graduate and postgraduate students, researchers, and engineers working in experimental mechanics and in the application of optical methods · Covers a broad spectrum of topics highlighting the use of optical methods in experimental mechanics, energy, and in the environment.

  7. Development of internal components for M38999 type connectors, for use in advanced photonic applications and with specialty optical fibers

    Science.gov (United States)

    Whitebook, Alan; Caloz, Francois

    2014-09-01

    This presentation outlines development work performed to produce internal components (connector insert assemblies & optical terminus assemblies) to be fit into MIL-DTL-38999, or commercial off the shelf (COTS) equivalent, connector housings. Connectors modified with these internal components are then suitable for optical termination and transmission through specialty fibers such as polarization maintaining, small core single-mode, and others, with the ability to achieve high levels of performance in the areas of insertion loss, return loss, polarization extinction ratio (as applicable) and power handling capability (as applicable.) Technical details are presented to illustrate features within the optical terminus, and its insert cavity, which serves to allow for fiber/ferrule polar orientation, concentricity of mated termini ferrules and fibers terminated within, and other attributes designed to support optical performance goals. Finally, optical performance data is given and discussed to illustrate results achieved by production of evaluation cable assemblies. emblies.

  8. A lower bound for routing on a completely connected optical communication parallel computer

    Energy Technology Data Exchange (ETDEWEB)

    Goldberg, L.A. [Sandia National Labs., Albuquerque, NM (United States); Jerrum, M. [Edinburgh Univ. (United Kingdom). Dept. of Computer Science; MacKenzie, P.D. [Texas Univ., Austin, TX (United States). Dept. of Computer Sciences

    1993-08-03

    The task of routing a 2-relation on an n-processor completely connected optical communication parallel computer (OCPC) is considered. A lower bound is presented that applies to any randomized distributed algorithm for this task: specifically, it is shown that the expected number of steps required to route a 2-relation is {Omega}({radical} log log n) in the worst case. For comparison, the best upper bound known is O(log log n).

  9. Computational Principle and Performance Evaluation of Coherent Ising Machine Based on Degenerate Optical Parametric Oscillator Network

    Directory of Open Access Journals (Sweden)

    Yoshitaka Haribara

    2016-04-01

    Full Text Available We present the operational principle of a coherent Ising machine (CIM based on a degenerate optical parametric oscillator (DOPO network. A quantum theory of CIM is formulated, and the computational ability of CIM is evaluated by numerical simulation based on c-number stochastic differential equations. We also discuss the advanced CIM with quantum measurement-feedback control and various problems which can be solved by CIM.

  10. Optimisation of post mortem cardiac computed tomography compared to optical coherence tomography and histopathology - Technical note

    DEFF Research Database (Denmark)

    Precht, Helle; Leth, Peter Mygind; Thygesen, Jesper

    2014-01-01

    Introduction: Coronary atherosclerosis is a leading cause of mortality. New technological developments in computed tomography (CT), including dual energy, iterative reconstructions and high definition scanning, could significantly improve the non-invasive identification of atherosclerosis plaques....... Here, a new method for optimising cardiac coronary CT with optical coherence tomography (OCT) and histopathology is presented. Materials and methods: Twenty human hearts obtained from autopsies were used. A contrast agent that solidifies after cooling was injected into the coronary arteries. CT...

  11. INVERSE COMPUTATION OF OPTICAL-ABSORPTION COEFFICIENT IN INHOMOGENEOUS MATERIAL WITH VARIED THERMAL CONDUCTIVITY

    Institute of Scientific and Technical Information of China (English)

    ZhuJianxin

    2002-01-01

    In this paper,for an inhomogeneous material in which the thermal conductivity varies as a function of depth,an efficient treatment is proposed to inversely calculate the depth distribution of optical-absorption coefficient by the surface temperature of the material. It is demonstrated that the results of inverse computation by that method are more similar to the experimental ones measured by some destructive method. Thus ,the treatment is more feasible to nondestructively estimate the distribution.

  12. PILOT—a Pathfinder for an International Large Optical Telescope in Antarctica

    Science.gov (United States)

    Ashley, M. C. B.; Burton, M. G.; Lawrence, J. S.; Storey, J. W. V.

    2006-08-01

    PILOT is a proposed 2.4 metre optical/IR telescope, designed to take advantage of the extraordinarily good observing conditions on the high plateau of Antarctica. The superb seeing and low infrared backgrounds will allow PILOT to outperform telescopes of 2-3 times the diameter at a mid-latitude site. PILOT is large enough to undertake important science, while small enough to act as a low-cost low-risk technology demonstrator for the next generation of large optical/IR telescopes in Antarctica. Future facilities could include the proposed 8.4 metre off-axis LAPCAT telescope, that would be competitive with ELTs in its ability to directly image extra-solar planets. PILOT is envisaged as an international collaboration. It is hoped that Australia will fund the telescope, with instruments, logistics and other aspects of the project contributed by international partners. A detailed science case for PILOT has been published, and a number of design studies for the telescope have been completed or are under way.

  13. Using the Hands-On Optics ``Terrific Telescopes'' Kit in the International Year of Astronomy

    Science.gov (United States)

    Pompea, S. M.; Walker, C. E.; Sparks, R. T.

    2008-06-01

    Hands-On Optics (HOO) is a collaborative four-year program to create and sustain a unique, national, informal science education program to excite students about science by actively engaging them in optics activities. The standards based activities and demonstrations have been successfully used in a variety of settings including formal classrooms, after school clubs, and science centers. One of the themes for the International Year of Astronomy (IYA) is "Looking Through a Telescope". We intend to use HOO activities in conjunction with the IYA to reinforce this important area. In this workshop, participants completed a series of activities involving refraction, lenses, telescopes, and ultraviolet light and took home a kit containing all the materials required to do the activities with a small group of students. Participants explored the basic properties of positive lenses to create images through the use of hands-on activities, exciting experiments, and educator-lead demonstrations, culminating with the building of a small refracting telescope. Several prototype telescopes were examined in the workshop for use in the International Year of Astronomy.

  14. Total internal reflection optical switch using the reverse breakdown of a pn junction in silicon.

    Science.gov (United States)

    Kim, Jong-Hun; Park, Hyo-Hoon

    2015-11-01

    We demonstrate a new type of silicon total-internal-reflection optical switch with a simple pn junction functioning both as a reflector and a heater. The reflector is placed between asymmetrically y-branched multimode waveguides with an inclination angle corresponding to half of the branch angle. When the reflector is at rest, incident light is reflected in accordance to the refractive index difference due to the plasma dispersion effect of the pre-doped carriers. Switching to the transmission state is attained under a reverse breakdown of the pn junction by the thermo-optic effect which smears the refractive index difference. From this switching scheme, we confirmed the switching operation with a shallow total-internal-reflection region of 1 μm width. At a 6° branch angle, an extinction ratio of 12 dB and an insertion loss of -4.2  dB are achieved along with a thermal heating power of 151.5 mW.

  15. Optical Multi-Gas Monitor Technology Demonstration on the International Space Station

    Science.gov (United States)

    Pilgrim, Jeffrey S.; Wood, William R.; Casias, Miguel E.; Vakhtin, Andrei B.; Johnson, Michael D.; Mudgett, Paul D.

    2014-01-01

    The International Space Station (ISS) employs a suite of portable and permanently located gas monitors to insure crew health and safety. These sensors are tasked with functions ranging from fixed mass spectrometer based major constituents analysis to portable electrochemical sensor based combustion product monitoring. An all optical multigas sensor is being developed that can provide the specificity of a mass spectrometer with the portability of an electrochemical cell. The technology, developed under the Small Business Innovation Research program, allows for an architecture that is rugged, compact and low power. A four gas version called the Multi-Gas Monitor was launched to ISS in November 2013 aboard Soyuz and activated in February 2014. The portable instrument is comprised of a major constituents analyzer (water vapor, carbon dioxide, oxygen) and high dynamic range real-time ammonia sensor. All species are sensed inside the same enhanced path length optical cell with a separate vertical cavity surface emitting laser (VCSEL) targeted at each species. The prototype is controlled digitally with a field-programmable gate array/microcontroller architecture. The optical and electronic approaches are designed for scalability and future versions could add three important acid gases and carbon monoxide combustion product gases to the four species already sensed. Results obtained to date from the technology demonstration on ISS are presented and discussed.

  16. Optical design and laser ablation of surface textures: demonstrating total internal reflection

    Science.gov (United States)

    Gommans, Hans; Booij, Silvia; Pijlman, Fetze; Krijn, Marcel; de Zwart, Siebe; Sepkhanov, Ruslan; Beaumont, Dave; van der Schaft, Hans; Sanders, Rene

    2015-09-01

    In lighting applications key drivers for optical design of surface textures are integration of optical elements, the disentanglement of optical functionality and appearance and late stage configuration. We investigated excimer laser ablation as a mastering technology for micro textured surfaces, where we targeted an increase in correspondence between surface design and ablated surface for high aspect ratio structures. To achieve this we have improved the photo mask design using a heuristic algorithm that corrects for the angular dependence of the ablation process and the loss of image resolution at ablation depths that exceed the depth of field. Using this approach we have been able to demonstrate close correspondence between designed and ablated facet structures up to 75° inclination at 75 μm depth. These facet design parameters allow for total internal reflection (TIR) as a means of beam deflection which is demonstrated in a range of mono shaped cone arrays in hexagonal tessellation. BSDF analysis was used to characterize the narrow TIR deflection beams that matched the peak positions of the design down to 28° apex. In addition, a single surface TIR-Fresnel lens design with focal distance 5 mm has been manufactured using this photo mask design algorithm and beam collimation up to 12° beam angle and 32° field angle is shown. These outcomes demonstrate that the laser ablation process intrinsically yields sufficient small dispersion in structure and fillet radii for lighting applications.

  17. Architectures, Concepts and Technologies for Service Oriented Computing : Proceedings of the 2nd International Workshop on Architectures, Concepts and Technologies for Service Oriented Computing - ACT4SOC 2008

    NARCIS (Netherlands)

    Sinderen, van Marten

    2008-01-01

    This volume contains the proceedings of the Second International Workshop on Architectures, Concepts and Technologies for Service Oriented Computing (ACT4SOC 2008), held on July 5 in Porto, Portugal, in conjunction with the Third International Conference on Software and Data Technologies (ICSOFT 200

  18. Scanning laser optical computed tomography system for large volume 3D dosimetry

    Science.gov (United States)

    Dekker, Kurtis H.; Battista, Jerry J.; Jordan, Kevin J.

    2017-04-01

    Stray light causes artifacts in optical computed tomography (CT) that negatively affect the accuracy of radiation dosimetry in gels or solids. Scatter effects are exacerbated by a large dosimeter volume, which is desirable for direct verification of modern radiotherapy treatment plans such as multiple-isocenter radiosurgery. The goal in this study was to design and characterize an optical CT system that achieves high accuracy primary transmission measurements through effective stray light rejection, while maintaining sufficient scan speed for practical application. We present an optical imaging platform that uses a galvanometer mirror for horizontal scanning, and a translation stage for vertical movement of a laser beam and small area detector for minimal stray light production and acceptance. This is coupled with a custom lens-shaped optical CT aquarium for parallel ray sampling of projections. The scanner images 15 cm diameter, 12 cm height cylindrical volumes at 0.33 mm resolution in approximately 30 min. Attenuation coefficients reconstructed from CT scans agreed with independent cuvette measurements within 2% for both absorbing and scattering solutions as well as small 1.25 cm diameter absorbing phantoms placed within a large, scattering medium that mimics gel. Excellent linearity between the optical CT scanner and the independent measurement was observed for solutions with between 90% and 2% transmission. These results indicate that the scanner should achieve highly accurate dosimetry of large volume dosimeters in a reasonable timeframe for clinical application to radiotherapy dose verification procedures.

  19. Scanning laser optical computed tomography system for large volume 3D dosimetry.

    Science.gov (United States)

    Dekker, Kurtis H; Battista, Jerry J; Jordan, Kevin J

    2017-04-07

    Stray light causes artifacts in optical computed tomography (CT) that negatively affect the accuracy of radiation dosimetry in gels or solids. Scatter effects are exacerbated by a large dosimeter volume, which is desirable for direct verification of modern radiotherapy treatment plans such as multiple-isocenter radiosurgery. The goal in this study was to design and characterize an optical CT system that achieves high accuracy primary transmission measurements through effective stray light rejection, while maintaining sufficient scan speed for practical application. We present an optical imaging platform that uses a galvanometer mirror for horizontal scanning, and a translation stage for vertical movement of a laser beam and small area detector for minimal stray light production and acceptance. This is coupled with a custom lens-shaped optical CT aquarium for parallel ray sampling of projections. The scanner images 15 cm diameter, 12 cm height cylindrical volumes at 0.33 mm resolution in approximately 30 min. Attenuation coefficients reconstructed from CT scans agreed with independent cuvette measurements within 2% for both absorbing and scattering solutions as well as small 1.25 cm diameter absorbing phantoms placed within a large, scattering medium that mimics gel. Excellent linearity between the optical CT scanner and the independent measurement was observed for solutions with between 90% and 2% transmission. These results indicate that the scanner should achieve highly accurate dosimetry of large volume dosimeters in a reasonable timeframe for clinical application to radiotherapy dose verification procedures.

  20. Prehistological evaluation of benign and malignant pigmented skin lesions with optical computed tomography

    Science.gov (United States)

    Kokolakis, Athanasios; Zacharakis, Giannis; Krasagakis, Konstantin; Lasithiotakis, Konstantinos; Favicchio, Rosy; Spiliopoulos, George; Giannikaki, Elpida; Ripoll, Jorge; Tosca, Androniki

    2012-06-01

    Discrimination of benign and malignant melanocytic lesions is a major issue in clinical dermatology. Assessment of the thickness of melanoma is critical for prognosis and treatment selection. We aimed to evaluate a novel optical computed tomography (optical-CT) system as a tool for three-dimensional (3-D) imaging of melanocytic lesions and its ability to discriminate benign from malignant melanocytic lesions while simultaneously determining the thickness of invasive melanoma. Seventeen melanocytic lesions, one hemangioma, and normal skin were assessed immediately after their excision by optical-CT and subsequently underwent histopathological examination. Tomographic reconstructions were performed with a back-propagation algorithm calculating a 3-D map of the total attenuation coefficient (AC). There was a statistically significant difference between melanomas, dysplastic nevi, and non-dysplastic nevi, as indicated by Kruskal-Wallis test. Median AC values were higher for melanomas compared with dysplastic and non-dysplastic nevi. No statistically significant difference was observed when thickness values obtained by optical-CT were compared with histological thickness using a Wilcoxon sighed rank test. Our results suggest that optical-CT can be important for the immediate prehistological evaluation of biopsies, assisting the physician for a rapid assessment of malignancy and of the thickness of a melanocytic lesion.

  1. 7th International Conference on Embedded and Multimedia Computing (EMC-12)

    CERN Document Server

    Jeong, Young-Sik; Park, Sang; Chen, Hsing-Chung; Embedded and Multimedia Computing Technology and Service

    2012-01-01

    The 7th International Conference on Embedded and Multimedia Computing (EMC-12), will be held in Gwangju, Korea on September 6 - 8, 2012. EMC-12 will be the most comprehensive conference focused on the various aspects of advances in Embedded and Multimedia (EM) Computing. EMC-12 will provide an opportunity for academic and industry professionals to discuss the latest issues and progress in the area of EM. In addition, the conference will publish high quality papers which are closely related to the various theories and practical applications in EM. Furthermore, we expect that the conference and its publications will be a trigger for further related research and technology improvements in this important subject. The EMC-12 is the next event, in a series of highly successful International Conference on Embedded and Multimedia Computing, previously held as EMC 2011 (China, Aug. 2011), EMC 2010 (Philippines, Aug. 2010), EM-Com 2009 (Korea, Dec. 2009), UMC-08 (Australia, Oct. 2008), ESO-08(China, Dec. 2008), UMS-08 ...

  2. Automatic on-line detection system design research on internal defects of metal materials based on optical fiber F-P sensing technology

    Science.gov (United States)

    Xia, Liu; Shan, Ning; Chao, Ban; Caoshan, Wang

    2016-10-01

    Metal materials have been used in aerospace and other industrial fields widely because of its excellent characteristics, so its internal defects detection is very important. Ultrasound technology is used widely in the fields of nondestructive detection because of its excellent characteristic. But the conventional detection instrument for ultrasound, which has shortcomings such as low intelligent level and long development cycles, limits its development. In this paper, the theory of ultrasound detection is analyzed. A computational method of the defects distributional position is given. The non-contact type optical fiber F-P interference cavity structure is designed and the length of origin cavity is given. The real-time on-line ultrasound detecting experiment devices for internal defects of metal materials is established based on the optical fiber F-P sensing system. The virtual instrument of automation ultrasound detection internal defects is developed based on LabVIEW software and the experimental study is carried out. The results show that this system can be used in internal defect real-time on-line locating of engineering structures effectively. This system has higher measurement precision. Relative error is 6.7%. It can be met the requirement of engineering practice. The system is characterized by simple operation, easy realization. The software has a friendly interface, good expansibility, and high intelligent level.

  3. Requirements for fault-tolerant factoring on an atom-optics quantum computer.

    Science.gov (United States)

    Devitt, Simon J; Stephens, Ashley M; Munro, William J; Nemoto, Kae

    2013-01-01

    Quantum information processing and its associated technologies have reached a pivotal stage in their development, with many experiments having established the basic building blocks. Moving forward, the challenge is to scale up to larger machines capable of performing computational tasks not possible today. This raises questions that need to be urgently addressed, such as what resources these machines will consume and how large will they be. Here we estimate the resources required to execute Shor's factoring algorithm on an atom-optics quantum computer architecture. We determine the runtime and size of the computer as a function of the problem size and physical error rate. Our results suggest that once the physical error rate is low enough to allow quantum error correction, optimization to reduce resources and increase performance will come mostly from integrating algorithms and circuits within the error correction environment, rather than from improving the physical hardware.

  4. Second International Conference on Near-Field Optical Analysis: Photodynamic Therapy and Photobiology Effects

    Science.gov (United States)

    Bulgher, Debra L. (Editor); Morrison, Dennis

    2002-01-01

    The International NASA/DARPA Photobiology Conference held at the Johnson Space Center in Houston/TX demonstrated where low level laser therapy (LLLT), respectively low intensity light activated biostimulation (LILAB) and nanotechnological applications employing photobiomodulation techniques will presumably go in the next ten years. The conference was a continuation of the 1st International Conference on Nearfield Optical Analysis organized by Andrei Sommer (ENSOMA Lab, University of Ulm, Germany) in November 2000 at Castle Reisenburg, Germany, which started with a group of ten scientists from eight different countries. The 1st conference was co-sponsored by the American Chemical Society to evaluate the molecular mechanism of accelerated and normal wound healing processes. The 2nd conference was co-sponsored by DARPA, NASA-JSC and the Medical College of Wisconsin. Despite the short time between events, the 2nd conference hosted 40 international experts form universities, research institutes, agencies and the industry. The materials published here are expected to become milestones forming a novel platform in biomedical photobiology. The multidisciplinary group of researchers focused on LLLT/LILAB-applications under extreme conditions expected to have beneficial effects particularly in space, on submarines, and under severe battlefield conditions. The group also focused on novel technologies with possibilities allowing investigating the interaction of light with biological systems, molecular mechanisms of wound healing, bone regeneration, nerve regeneration, pain modulation, as well as biomineralization and biofilm formulation processes induced by nanobacteria.

  5. Computer-aided design provisionalization and implant insertion combined with optical scanning of plaster casts and computed tomography data

    Science.gov (United States)

    Hara, Shingo; Mitsugi, Masaharu; Kanno, Takahiro; Tatemoto, Yukihiro

    2014-01-01

    The conventional implant prosthesis planning process currently involves confirmation of two-dimensional anatomical findings or the quantity and quality of bones using panoramic X-ray images. The introduction of computed tomography (CT) into the field has enabled the previously impossible confirmation of three-dimensional findings, making implant planning in precise locations possible. However, artifacts caused by the presence of metal prostheses can become problematic and can result in obstacles to diagnosis and implant planning. The most updated version of SimPlant® Pro has made it possible to integrate plaster cast images with CT data using optical scanning. Using this function, the obstacles created by metal prostheses are eliminated, facilitating implant planning at the actual intraoral location. Furthermore, a SurgiGuide® based on individual patient information can be created on plaster casts, resulting in easier and more precise implant insertion. PMID:24987602

  6. Computational optical palpation: micro-scale force mapping using finite-element methods (Conference Presentation)

    Science.gov (United States)

    Wijesinghe, Philip; Sampson, David D.; Kennedy, Brendan F.

    2016-03-01

    Accurate quantification of forces, applied to, or generated by, tissue, is key to understanding many biomechanical processes, fabricating engineered tissues, and diagnosing diseases. Many techniques have been employed to measure forces; in particular, tactile imaging - developed to spatially map palpation-mimicking forces - has shown potential in improving the diagnosis of cancer on the macro-scale. However, tactile imaging often involves the use of discrete force sensors, such as capacitive or piezoelectric sensors, whose spatial resolution is often limited to 1-2 mm. Our group has previously presented a type of tactile imaging, termed optical palpation, in which the change in thickness of a compliant layer in contact with tissue is measured using optical coherence tomography, and surface forces are extracted, with a micro-scale spatial resolution, using a one-dimensional spring model. We have also recently combined optical palpation with compression optical coherence elastography (OCE) to quantify stiffness. A main limitation of this work, however, is that a one-dimensional spring model is insufficient in describing the deformation of mechanically heterogeneous tissue with uneven boundaries, generating significant inaccuracies in measured forces. Here, we present a computational, finite-element method, which we term computational optical palpation. In this technique, by knowing the non-linear mechanical properties of the layer, and from only the axial component of displacement measured by phase-sensitive OCE, we can estimate, not only the axial forces, but the three-dimensional traction forces at the layer-tissue interface. We use a non-linear, three-dimensional model of deformation, which greatly increases the ability to accurately measure force and stiffness in complex tissues.

  7. PREFACE: First International Congress of the International Association of Inverse Problems (IPIA): Applied Inverse Problems 2007: Theoretical and Computational Aspects

    Science.gov (United States)

    Uhlmann, Gunther

    2008-07-01

    This volume represents the proceedings of the fourth Applied Inverse Problems (AIP) international conference and the first congress of the Inverse Problems International Association (IPIA) which was held in Vancouver, Canada, June 25 29, 2007. The organizing committee was formed by Uri Ascher, University of British Columbia, Richard Froese, University of British Columbia, Gary Margrave, University of Calgary, and Gunther Uhlmann, University of Washington, chair. The conference was part of the activities of the Pacific Institute of Mathematical Sciences (PIMS) Collaborative Research Group on inverse problems (http://www.pims.math.ca/scientific/collaborative-research-groups/past-crgs). This event was also supported by grants from NSF and MITACS. Inverse Problems (IP) are problems where causes for a desired or an observed effect are to be determined. They lie at the heart of scientific inquiry and technological development. The enormous increase in computing power and the development of powerful algorithms have made it possible to apply the techniques of IP to real-world problems of growing complexity. Applications include a number of medical as well as other imaging techniques, location of oil and mineral deposits in the earth's substructure, creation of astrophysical images from telescope data, finding cracks and interfaces within materials, shape optimization, model identification in growth processes and, more recently, modelling in the life sciences. The series of Applied Inverse Problems (AIP) Conferences aims to provide a primary international forum for academic and industrial researchers working on all aspects of inverse problems, such as mathematical modelling, functional analytic methods, computational approaches, numerical algorithms etc. The steering committee of the AIP conferences consists of Heinz Engl (Johannes Kepler Universität, Austria), Joyce McLaughlin (RPI, USA), William Rundell (Texas A&M, USA), Erkki Somersalo (Helsinki University of Technology

  8. Proceedings of the International Conference on Soft Computing for Problem Solving

    CERN Document Server

    Nagar, Atulya; Pant, Millie; Bansal, Jagdish

    2012-01-01

    The present book is based on the research papers presented in the International Conference on Soft Computing for Problem Solving (SocProS 2011), held at Roorkee, India. This book is divided into two volumes and covers a variety of topics, including mathematical modeling, image processing, optimization, swarm intelligence, evolutionary algorithms, fuzzy logic, neural networks, forecasting, data mining etc. Particular emphasis is laid on Soft Computing and its application to diverse fields. The prime objective of the book is to familiarize the reader with the latest scientific developments that are taking place in various fields and the latest sophisticated problem solving tools that are being developed to deal with the complex and intricate problems that are otherwise difficult to solve by the usual and traditional methods. The book is directed to the researchers and scientists engaged in various fields of Science and Technology.

  9. 11th International Conference On Broad-Band Wireless Computing, Communication and Applications

    CERN Document Server

    Xhafa, Fatos; Yim, Kangbin

    2017-01-01

    The success of all-IP networking and wireless technology has changed the ways of living the people around the world. The progress of electronic integration and wireless communications is going to pave the way to offer people the access to the wireless networks on the fly, based on which all electronic devices will be able to exchange the information with each other in ubiquitous way whenever necessary. The aim of the volume is to provide latest research findings, innovative research results, methods and development techniques from both theoretical and practical perspectives related to the emerging areas of broadband and wireless computing. This proceedings volume presents the results of the 11th International Conference on Broad-Band Wireless Computing, Communication And Applications (BWCCA-2016), held November 5-7, 2016, at Soonchunhyang University, Asan, Korea. .

  10. IV international conference on computational methods in marine engineering : selected papers

    CERN Document Server

    Oñate, Eugenio; García-Espinosa, Julio; Kvamsdal, Trond; Bergan, Pål; MARINE 2011

    2013-01-01

    This book contains selected papers from the Fourth International Conference on Computational Methods in Marine Engineering, held at Instituto Superior Técnico, Technical University of Lisbon, Portugal in September 2011.  Nowadays, computational methods are an essential tool of engineering, which includes a major field of interest in marine applications, such as the maritime and offshore industries and engineering challenges related to the marine environment and renewable energies. The 2011 Conference included 8 invited plenary lectures and 86 presentations distributed through 10 thematic sessions that covered many of the most relevant topics of marine engineering today. This book contains 16 selected papers from the Conference that cover “CFD for Offshore Applications”, “Fluid-Structure Interaction”, “Isogeometric Methods for Marine Engineering”, “Marine/Offshore Renewable Energy”, “Maneuvering and Seakeeping”, “Propulsion and Cavitation” and “Ship Hydrodynamics”.  The papers we...

  11. 3rd International Doctoral Symposium on Applied Computation and Security Systems

    CERN Document Server

    Saeed, Khalid; Cortesi, Agostino; Chaki, Nabendu

    2017-01-01

    This book presents extended versions of papers originally presented and discussed at the 3rd International Doctoral Symposium on Applied Computation and Security Systems (ACSS 2016) held from August 12 to 14, 2016 in Kolkata, India. The symposium was jointly organized by the AGH University of Science & Technology, Cracow, Poland; Ca’ Foscari University, Venice, Italy; and the University of Calcutta, India. The book is divided into two volumes, Volumes 3 and 4, and presents dissertation works in the areas of Image Processing, Biometrics-based Authentication, Soft Computing, Data Mining, Next-Generation Networking and Network Security, Remote Healthcare, Communications, Embedded Systems, Software Engineering and Service Engineering. The first two volumes of the book published the works presented at the ACSS 2015, which was held from May 23 to 25, 2015 in Kolkata, India.

  12. 9th International Workshop on Parallel Tools for High Performance Computing

    CERN Document Server

    Hilbrich, Tobias; Niethammer, Christoph; Gracia, José; Nagel, Wolfgang; Resch, Michael

    2016-01-01

    High Performance Computing (HPC) remains a driver that offers huge potentials and benefits for science and society. However, a profound understanding of the computational matters and specialized software is needed to arrive at effective and efficient simulations. Dedicated software tools are important parts of the HPC software landscape, and support application developers. Even though a tool is by definition not a part of an application, but rather a supplemental piece of software, it can make a fundamental difference during the development of an application. Such tools aid application developers in the context of debugging, performance analysis, and code optimization, and therefore make a major contribution to the development of robust and efficient parallel software. This book introduces a selection of the tools presented and discussed at the 9th International Parallel Tools Workshop held in Dresden, Germany, September 2-3, 2015, which offered an established forum for discussing the latest advances in paral...

  13. Proceedings of the International Conference on Soft Computing for Problem Solving

    CERN Document Server

    Nagar, Atulya; Pant, Millie; Bansal, Jagdish

    2012-01-01

    The present book is based on the research papers presented in the International Conference on Soft Computing for Problem Solving (SocProS 2011), held at Roorkee, India. This book is divided into two volumes and covers a variety of topics, including mathematical modeling, image processing, optimization, swarm intelligence, evolutionary algorithms, fuzzy logic, neural networks, forecasting, data mining etc. Particular emphasis is laid on Soft Computing and its application to diverse fields. The prime objective of the book is to familiarize the reader with the latest scientific developments that are taking place in various fields and the latest sophisticated problem solving tools that are being developed to deal with the complex and intricate problems that are otherwise difficult to solve by the usual and traditional methods. The book is directed to the researchers and scientists engaged in various fields of Science and Technology.

  14. PREFACE: International Conference on Computing in High Energy and Nuclear Physics (CHEP'09)

    Science.gov (United States)

    Gruntorad, Jan; Lokajicek, Milos

    2010-11-01

    The 17th International Conference on Computing in High Energy and Nuclear Physics (CHEP) was held on 21-27 March 2009 in Prague, Czech Republic. CHEP is a major series of international conferences for physicists and computing professionals from the worldwide High Energy and Nuclear Physics community, Computer Science, and Information Technology. The CHEP conference provides an international forum to exchange information on computing experience and needs for the community, and to review recent, ongoing and future activities. Recent conferences were held in Victoria, Canada 2007, Mumbai, India in 2006, Interlaken, Switzerland in 2004, San Diego, USA in 2003, Beijing, China in 2001, Padua, Italy in 2000. The CHEP'09 conference had 600 attendees with a program that included plenary sessions of invited oral presentations, a number of parallel sessions comprising 200 oral and 300 poster presentations, and an industrial exhibition. We thanks all the presenters, for the excellent scientific content of their contributions to the conference. Conference tracks covered topics on Online Computing, Event Processing, Software Components, Tools and Databases, Hardware and Computing Fabrics, Grid Middleware and Networking Technologies, Distributed Processing and Analysis and Collaborative Tools. The conference included excursions to Prague and other Czech cities and castles and a banquet held at the Zofin palace in Prague. The next CHEP conference will be held in Taipei, Taiwan on 18-22 October 2010. We would like thank the Ministry of Education Youth and Sports of the Czech Republic and the EU ACEOLE project for the conference support, further to commercial sponsors, the International Advisory Committee, the Local Organizing Committee members representing the five collaborating Czech institutions Jan Gruntorad (co-chair), CESNET, z.s.p.o., Prague Andrej Kugler, Nuclear Physics Institute AS CR v.v.i., Rez Rupert Leitner, Charles University in Prague, Faculty of Mathematics and

  15. 13th International Symposium on Distributed Computing and Artificial Intelligence 2016

    CERN Document Server

    Semalat, Ali; Bocewicz, Grzegorz; Sitek, Paweł; Nielsen, Izabela; García, Julián; Bajo, Javier

    2016-01-01

    The 13th International Symposium on Distributed Computing and Artificial Intelligence 2016 (DCAI 2016) is a forum to present applications of innovative techniques for studying and solving complex problems. The exchange of ideas between scientists and technicians from both the academic and industrial sector is essential to facilitate the development of systems that can meet the ever-increasing demands of today’s society. The present edition brings together past experience, current work and promising future trends associated with distributed computing, artificial intelligence and their application in order to provide efficient solutions to real problems. This symposium is organized by the University of Sevilla (Spain), Osaka Institute of Technology (Japan), and the Universiti Teknologi Malaysia (Malaysia).

  16. Dependable Distributed Computing for the International Telecommunication Union Regional Radio Conference RRC06

    CERN Document Server

    Moscicki, Jakub T; Lamanna, Massimo; Méndez, Patricia; Muraru, Adrian

    2009-01-01

    The International Telecommunication Union (ITU) Regional Radio Conference (RRC06) established in 2006 a new frequency plan for the introduction of digital broadcasting in European, African, Arab, CIS countries and Iran. The preparation of the plan involved complex calculations under short deadline and required dependable and efficient computing capability. The ITU designed and deployed in-situ a dedicated PC farm, in parallel to the European Organization for Nuclear Research (CERN) which provided and supported a system based on the EGEE Grid. The planning cycle at the RRC06 required a periodic execution in the order of 200,000 short jobs, using several hundreds of CPU hours, in a period of less than 12 hours. The nature of the problem required dynamic workload-balancing and low-latency access to the computing resources. We present the strategy and key technical choices that delivered a reliable service to the RRC06.

  17. Integrating Free Computer Software in Chemistry and Biochemistry Instruction: An International Collaboration

    Science.gov (United States)

    Cedeño, David L.; Jones, Marjorie A.; Friesen, Jon A.; Wirtz, Mark W.; Ríos, Luz Amalia; Ocampo, Gonzalo Taborda

    2010-10-01

    At the Universidad de Caldas, Manizales, Colombia, we used their new computer facilities to introduce chemistry graduate students to biochemical database mining and quantum chemistry calculations using freeware. These hands-on workshops allowed the students a strong introduction to easily accessible software and how to use this software to begin to explore computer modeling. Each workshop was scheduled for 2 h and each included a tutorial exercise to familiarize the students with the main menus and features of the software. In addition, accompanying lectures and practical laboratory sections were provided. Both courses were taught in Spanish although the written instructions were in English. This was not a problem since these students have a comfort level with reading English. Student feedback following these workshops was highly enthusiastic and positive. This international collaborative will impact both the teaching and research goals for this cohort of graduate students.

  18. 10th International Workshop on Parallel Tools for High Performance Computing

    CERN Document Server

    Gracia, José; Hilbrich, Tobias; Knüpfer, Andreas; Resch, Michael; Nagel, Wolfgang

    2017-01-01

    This book presents the proceedings of the 10th International Parallel Tools Workshop, held October 4-5, 2016 in Stuttgart, Germany – a forum to discuss the latest advances in parallel tools. High-performance computing plays an increasingly important role for numerical simulation and modelling in academic and industrial research. At the same time, using large-scale parallel systems efficiently is becoming more difficult. A number of tools addressing parallel program development and analysis have emerged from the high-performance computing community over the last decade, and what may have started as collection of small helper script has now matured to production-grade frameworks. Powerful user interfaces and an extensive body of documentation allow easy usage by non-specialists.

  19. 3rd International Conference on Modelling, Computation and Optimization in Information Systems and Management Sciences

    CERN Document Server

    Dinh, Tao; Nguyen, Ngoc

    2015-01-01

    This proceedings set contains 85 selected full papers presented at the 3rd International Conference on Modelling, Computation and Optimization in Information Systems and Management Sciences - MCO 2015, held on May 11–13, 2015 at Lorraine University, France. The present part I of the 2 volume set includes articles devoted to Combinatorial optimization and applications, DC programming and DCA: thirty years of Developments, Dynamic Optimization, Modelling and Optimization in financial engineering, Multiobjective programming, Numerical Optimization, Spline Approximation and Optimization, as well as Variational Principles and Applications

  20. Simplified Computation of Reflective Overpressure in Closed Cuboid Space Due to Internal Explosion

    Institute of Scientific and Technical Information of China (English)

    田力; 李忠献; 周清

    2010-01-01

    A simplified method is proposed for analyzing the overpressure history of an optional point on the walls of a closed cuboid due to its internal optional point-explosion. Firstly, the overpressure histories of all nodes on the walls of a cube with a side-length of 2 m are computed under a reference-charge explosion at each node of its inner space using the LS-DYNA software, and then are collected to form a reference database. Next, with the thought of the isoparametric finite element, an interpolating algori...