Convergent transmission of RNAi guide-target mismatch information across Argonaute internal allosteric network.

Science.gov (United States)

Joseph, Thomas T; Osman, Roman

2012-01-01

In RNA interference, a guide strand derived from a short dsRNA such as a microRNA (miRNA) is loaded into Argonaute, the central protein in the RNA Induced Silencing Complex (RISC) that silences messenger RNAs on a sequence-specific basis. The positions of any mismatched base pairs in an miRNA determine which Argonaute subtype is used. Subsequently, the Argonaute-guide complex binds and silences complementary target mRNAs; certain Argonautes cleave the target. Mismatches between guide strand and the target mRNA decrease cleavage efficiency. Thus, loading and silencing both require that signals about the presence of a mismatched base pair are communicated from the mismatch site to effector sites. These effector sites include the active site, to prevent target cleavage; the binding groove, to modify nucleic acid binding affinity; and surface allosteric sites, to control recruitment of additional proteins to form the RISC. To examine how such signals may be propagated, we analyzed the network of internal allosteric pathways in Argonaute exhibited through correlations of residue-residue interactions. The emerging network can be described as a set of pathways emanating from the core of the protein near the active site, distributed into the bulk of the protein, and converging upon a distributed cluster of surface residues. Nucleotides in the guide strand "seed region" have a stronger relationship with the protein than other nucleotides, concordant with their importance in sequence selectivity. Finally, any of several seed region guide-target mismatches cause certain Argonaute residues to have modified correlations with the rest of the protein. This arises from the aggregation of relatively small interaction correlation changes distributed across a large subset of residues. These residues are in effector sites: the active site, binding groove, and surface, implying that direct functional consequences of guide-target mismatches are mediated through the cumulative effects of

The Eclipse system for surveying the guide tubes of control rod clusters

International Nuclear Information System (INIS)

Pace, Y.M.

2008-01-01

Eclipse is a new system developed by Areva to assess the wear of the guide tubes of control rod clusters. This system is based on the projection of a shadow on a light plan in order to record the profile and the internal diameter of a hollow tube. This system allows us to quantify the wear and it can be included in a program dedicated to monitor the wear and master its kinetics. This system has been validated on the guide tubes from the Ringhals units. (A.C.)

TIMSS 2011 User Guide for the International Database. Supplement 2: National Adaptations of International Background Questionnaires

Science.gov (United States)

Foy, Pierre, Ed.; Arora, Alka, Ed.; Stanco, Gabrielle M., Ed.

2013-01-01

This supplement describes national adaptations made to the international version of the TIMSS 2011 background questionnaires. This information provides users with a guide to evaluate the availability of internationally comparable data for use in secondary analyses involving the TIMSS 2011 background variables. Background questionnaire adaptations…

Control rod guide tube cleaning device

International Nuclear Information System (INIS)

Tsuji, Tadashi; Shiota, Yoshiaki.

1990-01-01

Since there was no exclusive device for cleaning control rods, no effective cleaning could not be conducted and there was a possibility that obstacles may not be recovered. Then, there are disposed a first pump for supplying pressurized water, a spray nozzle for forming a swirling flow in a control rod guide tube, a second pump for pressurizing water introduced by a sucking pipeline and a collecting device for recovering obstacles intruding to water from the second pump. The pressurized water supplied from the first pump is introduced to a head passing through a blowing pipe and jetted from the spray nozzle to the control rod guide tube. In this case, a swirling stream occurs and obstacles in the control guide tube are mixed into water. The water containing the obstacles passes from the sucking port through a pipeline, introduced to the second pump and recovered to the collecting device. Since there is no water staying portion upon cleaning operation, the obstacles accumulating over the entire region of the bottom of the guide tube can be recovered reliably and efficiently. (N.H.)

Telemedicine-guided, very low-dose international normalized ratio self-control in patients with mechanical heart valve implants.

Science.gov (United States)

Koertke, Heinrich; Zittermann, Armin; Wagner, Otto; Secer, Songuel; Sciangula, Alfonso; Saggau, Werner; Sack, Falk-Udo; Ennker, Jürgen; Cremer, Jochen; Musumeci, Francesco; Gummert, Jan F

2015-06-01

To study in patients performing international normalized ratio (INR) self-control the efficacy and safety of an INR target range of 1.6-2.1 for aortic valve replacement (AVR) and 2.0-2.5 for mitral valve replacement (MVR) or double valve replacement (DVR). In total, 1304 patients undergoing AVR, 189 undergoing MVR and 78 undergoing DVR were randomly assigned to low-dose INR self-control (LOW group) (INR target range, AVR: 1.8-2.8; MVR/DVR: 2.5-3.5) or very low-dose INR self-control once a week (VLO group) and twice a week (VLT group) (INR target range, AVR: 1.6-2.1; MVR/DVR: 2.0-2.5), with electronically guided transfer of INR values. We compared grade III complications (major bleeding and thrombotic events; primary end-points) and overall mortality (secondary end-point) across the three treatment groups. Two-year freedom from bleedings in the LOW, VLO, and VLT groups was 96.3, 98.6, and 99.1%, respectively (P = 0.008). The corresponding values for thrombotic events were 99.0, 99.8, and 98.9%, respectively (P = 0.258). The risk-adjusted composite of grade III complications was in the per-protocol population (reference: LOW-dose group) as follows: hazard ratio = 0.307 (95% CI: 0.102-0.926; P = 0.036) for the VLO group and = 0.241 (95% CI: 0.070-0.836; P = 0.025) for the VLT group. The corresponding values of 2-year mortality were = 1.685 (95% CI: 0.473-5.996; P = 0.421) for the VLO group and = 4.70 (95% CI: 1.62-13.60; P = 0.004) for the VLT group. Telemedicine-guided very low-dose INR self-control is comparable with low-dose INR in thrombotic risk, and is superior in bleeding risk. Weekly testing is sufficient. Given the small number of MVR and DVR patients, results are only valid for AVR patients. Published on behalf of the European Society of Cardiology. All rights reserved. © The Author 2014. For permissions please email: journals.permissions@oup.com.

Export control guide: Spent nuclear fuel reprocessing and preparation of plutonium metal

International Nuclear Information System (INIS)

1993-10-01

The international Treaty on the Non-Proliferation of Nuclear Weapons, also referred to as the Non-Proliferation Treaty (NPT), states in Article III, paragraph 2(b) that open-quotes Each State Party to the Treaty undertakes not to provide . . . equipment or material especially designed or prepared for the processing, use or production of special fissionable material to any non-nuclear-weapon State for peaceful purposes, unless the source or special fissionable material shall be subject to the safeguards required by this Article.close quotes This guide was prepared to assist export control officials in the interpretation, understanding, and implementation of export laws and controls relating to the international Trigger List for irradiated nuclear fuel reprocessing equipment, components, and materials. The guide also contains information related to the production of plutonium metal. Reprocessing and its place in the nuclear fuel cycle are described briefly; the standard procedure to prepare metallic plutonium is discussed; steps used to prepare Trigger List controls are cited; descriptions of controlled items are given; and special materials of construction are noted. This is followed by a comprehensive description of especially designed or prepared equipment, materials, and components of reprocessing and plutonium metal processes and includes photographs and/or pictorial representations. The nomenclature of the Trigger List has been retained in the numbered sections of this document for clarity

Convergent transmission of RNAi guide-target mismatch information across Argonaute internal allosteric network.

Directory of Open Access Journals (Sweden)

Thomas T Joseph

Full Text Available In RNA interference, a guide strand derived from a short dsRNA such as a microRNA (miRNA is loaded into Argonaute, the central protein in the RNA Induced Silencing Complex (RISC that silences messenger RNAs on a sequence-specific basis. The positions of any mismatched base pairs in an miRNA determine which Argonaute subtype is used. Subsequently, the Argonaute-guide complex binds and silences complementary target mRNAs; certain Argonautes cleave the target. Mismatches between guide strand and the target mRNA decrease cleavage efficiency. Thus, loading and silencing both require that signals about the presence of a mismatched base pair are communicated from the mismatch site to effector sites. These effector sites include the active site, to prevent target cleavage; the binding groove, to modify nucleic acid binding affinity; and surface allosteric sites, to control recruitment of additional proteins to form the RISC. To examine how such signals may be propagated, we analyzed the network of internal allosteric pathways in Argonaute exhibited through correlations of residue-residue interactions. The emerging network can be described as a set of pathways emanating from the core of the protein near the active site, distributed into the bulk of the protein, and converging upon a distributed cluster of surface residues. Nucleotides in the guide strand "seed region" have a stronger relationship with the protein than other nucleotides, concordant with their importance in sequence selectivity. Finally, any of several seed region guide-target mismatches cause certain Argonaute residues to have modified correlations with the rest of the protein. This arises from the aggregation of relatively small interaction correlation changes distributed across a large subset of residues. These residues are in effector sites: the active site, binding groove, and surface, implying that direct functional consequences of guide-target mismatches are mediated through the

Success Rate and Complications of Internal Jugular Vein Catheterization With and Without Ultrasonography Guide

OpenAIRE

Karimi-Sari, Hamidreza; Faraji, Mehrdad; Mohazzab Torabi, Saman; Asjodi, Gholamreza

2014-01-01

Background: Central venous catheterization (CVC) is an important procedure in emergency departments (EDs). Despite existence of ultrasonography (US) devices in every ED, CVC is done using anatomical landmarks in many EDs in Iran. Objectives: This study aimed to compare the traditional landmark method vs. US-guided method of CVC placement in terms of complications and success rate. Patients and Methods: In this randomized controlled trial, patients who were candidate for internal jugular vein ...

Removable control rod drive shaft guide

International Nuclear Information System (INIS)

Ales, M.W.; Brown, S.K.; Dixon, L.D.

1988-01-01

A removable control rod drive shaft guide is described for a control rod ''guide'' structure card, comprising: a. a substantially annular shaped main body portion having a central axial bore for receiving a control rod drive shaft and an upper exterior groove for receiving removal tooling; b. the main body portion having a reduced outer diameter at its lower section; c. a shoulder portion integral with the main body portion for supporting the main body portion on the guide structure card; d. the shoulder portion having a substantially radial bore and the reduced outer diameter lower section having a slot in alignment with the radial bore; e. a locking arm ''pivotaly'' mounted in the radial bore which protrudes into the slot and is movable between a first normal locking position for engaging the guide structure card and a second release position; f. a spring received within a second axial bore in the main body portion and biased against the locking arm for urging and locking arm into the first normal locking position; and g. a release tab at one end of the locking arm for moving the locking arm into the second release position

Cavitation guide for control valves

Energy Technology Data Exchange (ETDEWEB)

Tullis, J.P. [Tullis Engineering Consultants, Logan, UT (United States)

1993-04-01

This guide teaches the basic fundamentals of cavitation to provide the reader with an understanding of what causes cavitation, when it occurs, and the potential problems cavitation can cause to a valve and piping system. The document provides guidelines for understanding how to reduce the cavitation and/or select control valves for a cavitating system. The guide provides a method for predicting the cavitation intensity of control valves, and how the effect of cavitation on a system will vary with valve type, valve function, valve size, operating pressure, duration of operation and details of the piping installation. The guide defines six cavitation limits identifying cavitation intensities ranging from inception to the maximum intensity possible. The intensity of the cavitation at each limit Is described, including a brief discussion of how each level of cavitation influences the valve and system. Examples are included to demonstrate how to apply the method, including making both size and pressure scale effects corrections. Methods of controlling cavitation are discussed providing information on various techniques which can be used to design a new system or modify an existing one so it can operate at a desired level of cavitation.

Cavitation guide for control valves

International Nuclear Information System (INIS)

Tullis, J.P.

1993-04-01

This guide teaches the basic fundamentals of cavitation to provide the reader with an understanding of what causes cavitation, when it occurs, and the potential problems cavitation can cause to a valve and piping system. The document provides guidelines for understanding how to reduce the cavitation and/or select control valves for a cavitating system. The guide provides a method for predicting the cavitation intensity of control valves, and how the effect of cavitation on a system will vary with valve type, valve function, valve size, operating pressure, duration of operation and details of the piping installation. The guide defines six cavitation limits identifying cavitation intensities ranging from inception to the maximum intensity possible. The intensity of the cavitation at each limit Is described, including a brief discussion of how each level of cavitation influences the valve and system. Examples are included to demonstrate how to apply the method, including making both size and pressure scale effects corrections. Methods of controlling cavitation are discussed providing information on various techniques which can be used to design a new system or modify an existing one so it can operate at a desired level of cavitation

Guide for International Peer Reviews of Decommissioning Cost Studies for Nuclear Facilities

International Nuclear Information System (INIS)

LaGuardia, Thomas S.; Pescatore, Claudio; )

2014-01-01

Peer reviews are a standard co-operative OECD working tool that offer member countries a framework to compare experiences and examine best practices in a host of areas. The OECD Nuclear Energy Agency (NEA) has developed a proven methodology for conducting peer reviews in radioactive waste management and nuclear R and D. Using this methodology, the NEA Radioactive Waste Management Committee's Working Party on Decommissioning and Dismantling (WPDD) developed the present guide as a framework for decommissioning cost reviewers and reviewees to prepare for and conduct international peer reviews of decommissioning cost estimate studies for nuclear facilities. It includes checklists that will help national programmes or relevant organisations to assess and improve decommissioning cost estimate practices in the future. This guide will act as the NEA reference for conducting such international peer reviews. The remainder of this guide is divided into eight chapters. Chapter 2 describes gathering the cost estimate study and underpinning documents, reviewing the study and writing a final report. Chapter 3 provides a detailed checklist approach for the review of the cost study report. Chapter 4 provides checklists to assist in reviewing benchmarked information. Chapter 5 provides comments on the approach and recommendations for use of this guide. Chapters 6 and 7 provide the background material used in developing this guide and Chapter 8 provides a list of the abbreviations and acronyms used in this guide

Personal security a guide for international travelers

CERN Document Server

Spencer, Tanya

2013-01-01

Personal Security: A Guide for International Travelers provides the perfect mix of lessons-learned, tools, and recommendations from experts so that readers can personalize their own approach to managing travel risks. If followed, the information provided will allow readers to get out and experience the local culture while still traveling safely.-Bernie Sullivan, Director Global Security, Hanesbrands Inc....a must-have for any traveler. Having worked in South and Southeast Asia, I know the advice provided in the book holds the key to keeping safe, avoiding dangerous situations, and managing threats when they occur. The book's methodological framework, combined with the author's extensive experience and hands-on knowledge, provide very practical and useful advice.-Kathrine Alexandrowiz, Independent consultant at Kathalyst, former coordinator for the "Regional Risk Management Project for NGOs in Asia Pacific" (ECHO)... a go-to guide for all travelers irrespective of mission or purpose. An excellent piece of work...

Distinction between externally vs. internally guided decision-making: Operational differences, meta-analytical comparisons and their theoretical implications

Directory of Open Access Journals (Sweden)

Takashi eNakao

2012-03-01

Full Text Available Most experimental studies of decision-making have specifically examined situations in which a single less-predictable correct answer exists (externally guided decision-making under uncertainty. Along with such externally guided decision-making, there are instances of decision making in which no correct answer based on external circumstances is available for the subject (internally guided decision-making. Such decisions are usually made in the context of moral decision making as well as in preference judgment, where the answer depends on the subject’s own, i.e. internal, preferences rather than on external, i.e. circumstantial, criteria. The neuronal and psychological mechanisms that allow guidance of decisions based on more internally oriented criteria in the absence of external ones remain unclear. This study was undertaken to compare decision making of these two kinds empirically and theoretically. First, we reviewed studies of decision making to clarify experimental–operational differences between externally guided and internally guided decision-making. Second, using MKDA, a whole-brain-based quantitative meta-analysis of neuroimaging studies was performed. Our meta-analysis revealed that the neural network used predominantly for internally guided decision-making differs from that for externally guided decision-making under uncertainty. This result suggests that studying only externally guided decision-making under uncertainty is insufficient to account for decision-making processes in the brain. Finally, based on the review and results of the meta-analysis, we discuss the differences and relations between decision making of these two types in terms of their operational, neuronal, and theoretical characteristics.

Protective guide structure for reactor control rod

International Nuclear Information System (INIS)

Ban, Minoru; Umeda, Kenji; Kubo, Noboru; Ito, Tomohiro.

1996-01-01

The present invention provides an improved protective guide structure for control rods, which does not cause swirling of coolants and resonance even though a slit is formed on a protective tube which surrounds a control rod element in a PWR type reactor. Namely, a reactor control rod is constituted with elongated control elements collectively bundled in the form of a cluster. The protective guide structure protectively guides the collected constituent at the upper portion of a reactor container. The protective structure comprises a plurality of protective tubes each having a C-shaped cross section disposed in parallel for receiving control rod elements individually in which the corners of the opening of the cross section of the protective tube are chamfered to an appropriate configuration. With such a constitution, even if coolant flows in a circumferential direction along the protective tubes surrounding the control rod elements, no shearing stream is caused to the coolants flow since the corners of the cross sectional opening (slit) of the tube are chamfered. Accordingly, occurrence of swirlings can be suppressed. (I.S.)

Internal Displacement, the Guiding Principles on Internal Displacement, the Principles Normative Status, and the Need for their Effective Domestic Implementation in Colombia.

Directory of Open Access Journals (Sweden)

Robert K. Goldman

2010-05-01

Full Text Available The paper briefly examines the phenomenon of internal displacement world-wide and the genesis of the United Nation’s mandate to deal with this problem. It examines key conclusions of a UN sponsored study which found that existing international law contained signifi cant gaps and grey areas in terms of meeting the needs of internally displaced persons. It also examines the origins and the content of the Guiding Principles on Internal Displacement and the normative status of these Principles. It suggests that, while not binding as such on states, the Guiding Principles have nonetheless become the most authoritative expression of minimum international standards applicable to the internally displaced and that based on state practice many, if not all, of these principles may eventually become part of customary international law. The paper also discusses the need for effective domestic implementation of the Guiding Principles, and examines how governmental authorities, the Constitutional Court and civil society organizations in Colombia, as well as inter-governmental bodies, have responded to the crisis of internal displacement in the country. While noting the adequacy of Colombia’s legislative framework on internal displacement, the paper concludes that the State has not taken the measures required to prevent future displacement or to effectively meet the protection and assistance needs of its displaced citizens.

Control rod guide tube of nuclear reactor

International Nuclear Information System (INIS)

Suda, Yoshitaka; Ito, Kenji; Matsumoto, Kunio.

1994-01-01

Zr having a residual tensile stress of 3 to 10kg/mm 2 in a circumferential direction is used for the main ingredient of a control guide tube of a nuclear reactor. For this purpose, an appropriate correction method such as a roll-correction, tension-correction and press-correction method is applied to an existent Zr-base alloy tube with no substantial residual stress. If the residual tensile stress in the circumferential direction is smaller than 3kg/mm 2 , an effect sufficient to suppress irradiation growth is not obtainable, if it exceeds 10kg/mm 2 , dimensional changes, cracks or the like occurs locally since the wall thickness of the control rod guide tube is small and, accordingly, this often results in failed products as the control guide tube. (N.H.)

Internal Control: Peran Dan Perkembangannya

OpenAIRE

Murtin, Alek

2000-01-01

Perhatian terhadap pentingnya internal control dalam organisasi berjalan dari waktu ke waktu untuk meningkatkan fungsi internal control yang disesuaikan dengan perkembangan lingkungan organisasi, dimulai dengan adanya internal check, kemudian internal control system, internal control structure dan terakhir adalah internal control-integrated framework. Internal control system sempat berkembang beberapa tahun di Indonesia yang selanjutnya digantikan oleh internal control structure yang digunaka...

Ultrasound-controlled neuronavigator-guided brain surgery.

Science.gov (United States)

Koivukangas, J; Louhisalmi, Y; Alakuijala, J; Oikarinen, J

1993-07-01

The development of a unique neurosurgical navigator is described and a preliminary series of seven cases of intracerebral lesions approached with the assistance of this neuronavigation system under ultrasound control is presented. The clinical series included five low-grade astrocytomas, one chronic intracerebral hematoma, and one porencephalic cyst. Management procedures included biopsy in all cases, drainage of the hematoma, and endoscopy and fenestration for the cyst. The features of the neuronavigation system are interactive reconstructions of preoperative computerized tomography and magnetic resonance imaging data, corresponding intraoperative ultrasound images, versatility of the interchangeable end-effector instruments, graphic presentation of instruments on the reconstructed images, and voice control of the system. The principle of a common axis in the reconstructed images served to align the navigational pointer, biopsy guide, endoscope guide, ultrasound transducer, and surgical microscope to the brain anatomy. Intraoperative ultrasound imaging helped to verify the accuracy of the neuronavigator and check the results of the procedures. The arm of the neuronavigation system served as a holder for instruments, such as the biopsy guide, endoscope guide, and ultrasound transducer, in addition to functioning as a navigational pointer. Also, the surgical microscope was aligned with the neuronavigator for inspection and biopsy of the hematoma capsule to rule out tumor etiology. Voice control freed the neurosurgeon from manual exercises during start-up and calibration of the system.

Performance and internal flow characteristics of a cross-flow turbine by guide vane angle

International Nuclear Information System (INIS)

Chen, Z M; Choi, Y D

2013-01-01

This study attempts to investigate the performance and internal flow characteristics of a cross-flow turbine by guide vane angle. In order to improve the performance of a cross flow turbine, the paper presents a numerical investigation of the turbine with air supply and discusses the influence of variable guide vane angle on the internal flow. A newly developed air supply from air suction Hole is adopted. To investigate the performance and internal flow of the cross-flow turbine, the CFD software based on the two-phase flow model is utilized. The numerical grids are made in two-dimensional geometry in order to shorten the time of two-phase calculations. Then a series of CFD analysis has been conducted in the range of different guide vane angle. Moreover, local output power is divided at different stages and the effect of air layer in each stage is examined

Dengue and Chikungunya Vector Control Pocket Guide

Science.gov (United States)

This technical guide consolidates information and procedures for surveillance and control of mosquitoes that transmit dengue and chikungunya viruses. The guide focuses on mosquitoes that transmit dengue but also makes reference to chikungunya and yellow fever because the pathogens that cause these ...

Effect of guided relaxation and imagery on falls self-efficacy: a randomized controlled trial.

Science.gov (United States)

Kim, Bang Hyun; Newton, Roberta A; Sachs, Michael L; Glutting, Joseph J; Glanz, Karen

2012-06-01

To examine the effects of guided relaxation and imagery (GRI) on improvement in falls self-efficacy in older adults who report having a fear of falling. Randomized, controlled trial with allocation to GRI or guided relaxation with music of choice. General community. Ninety-one men and women aged 60 to 92. Participants were randomized to listen to a GRI audio compact disk (intervention group) or a guided relaxation audio compact disk and music of choice (control group) twice a week for 6 weeks for 10 minutes per session. Primary outcome measure was the Short Falls Efficacy Scale-International (FES-I). Secondary outcome measures were the Leisure Time Exercise Questionnaire (LTEQ) and the Timed Up and Go (TUG) mobility test. GRI participants reported greater improvements on the Short FES-I (P = .002) and LTEQ (P = .001) scores and shorter time on the TUG (P = .002) than the guided relaxation and music-of-choice group. GRI was more effective at increasing falls self-efficacy and self-reported leisure time exercise and reducing times on a simple mobility test than was guided relaxation with music of choice. GRI is an effective, simple, low-cost tool for older adults to improve falls self-efficacy and leisure time exercise behaviors. © 2012, Copyright the Authors Journal compilation © 2012, The American Geriatrics Society.

Success rate and complications of internal jugular vein catheterization with and without ultrasonography guide.

Science.gov (United States)

Karimi-Sari, Hamidreza; Faraji, Mehrdad; Mohazzab Torabi, Saman; Asjodi, Gholamreza

2014-12-01

Central venous catheterization (CVC) is an important procedure in emergency departments (EDs). Despite existence of ultrasonography (US) devices in every ED, CVC is done using anatomical landmarks in many EDs in Iran. This study aimed to compare the traditional landmark method vs. US-guided method of CVC placement in terms of complications and success rate. In this randomized controlled trial, patients who were candidate for internal jugular vein catheterization, and referred to Baqiyatallah Hospital ED were randomly allocated into US-guided CVC and anatomical landmarks guided CVC groups. Central vein access time, number of attempts, success rate, and complications in each group were evaluated. Mann-Whitney U, chi-square and Fisher exact tests along with Pearson and Spearman correlation coefficients were used to analyze the data. Out of 100 patients, 56 were male and 44 were female. No significant differences were found between the US-guided and traditional landmark methods of CVC insertion in terms of age, gender, BMI, and site of catheter insertion. The mean access time was significantly lower in the US-guided group (37.12 ± 17.33 s vs. 63.42 ± 35.19 s, P < 0.001). The mean number of attempts was also significantly lower in the US-guided group (1.12 ± 0.3 vs. 1.58 ± 0.64 times, P < 0.001). Eighty-eight percent of patients in the US-guided group were catheterized in the first attempt, while 50% of patients in the traditional landmark group were catheterized in the second or more attempts (P < 0.001). The success rate was 100% in the US-guided group, while it was 88% in the landmark group (P = 0.013). Moreover, the rate of complications was significantly lower in the US-guided group (4% vs. 24%, P = 0.004). The US-guided method for CVC placement was superior to the traditional landmark method in terms of access time, number of attempts, success rate, and fewer complications.

Regulatory control of radiation sources. Safety guide

International Nuclear Information System (INIS)

2004-01-01

The basic requirements for the protection of persons against exposure to ionizing radiation and for the safety of radiation sources were established in the International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources (the Basic Safety Standards), jointly sponsored by the Food and Agriculture Organization of the United Nations (FAO), the International Atomic Energy Agency (IAEA), the International Labour Organization (ILO), the OECD Nuclear Energy Agency (OECD/ NEA), the Pan American Health Organization (PAHO) and the World Health Organization (WHO) (the Sponsoring Organizations). The application of the Basic Safety Standards is based on the presumption that national infrastructures are in place to enable governments to discharge their responsibilities for radiation protection and safety. Requirements relating to the legal and governmental infrastructure for the safety of nuclear facilities and sources of ionizing radiation, radiation protection, the safe management of radioactive waste and the safe transport of radioactive material are established in the Safety Requirements on Legal and Governmental Infrastructure for Nuclear, Radiation, Radioactive Waste and Transport Safety, Safety Standards Series No. GS-R-1. This Safety Guide, which is jointly sponsored by the FAO, the IAEA, the International Labour Office, the PAHO and the WHO, gives detailed guidance on the key elements for the organization and operation of a national regulatory infrastructure for radiation safety, with particular reference to the functions of the national regulatory body that are necessary to ensure the implementation of the Basic Safety Standards. The Safety Guide is based technically on material first published in IAEA-TECDOC-10671, which was jointly sponsored by the FAO, the IAEA, the OECD/NEA, the PAHO and the WHO. The requirements established in GS-R-1 have been taken into account. The Safety Guide is oriented towards national

Percutaneous sclerotherapy of the internal spermatic vein for varicocele through an open ended guide wire

Energy Technology Data Exchange (ETDEWEB)

Wilms, G.; Oyen, R.; Casselman, J.; Baert, A.L.

1987-08-01

Percutaneous sclerotherapy of the internal spermatic vein through an open ended guide wire was performed in 50 patients with left sided variocele. The procedure was successful in 47 patients, without major complications. Percutaneous sclerotherapy through an open ended guide wire offers the advantage of very distal and superselective catheterization with complete embolization of the internal spermatic vein, its side branches and parallel collateral channels. Further follow-up hopefully will confirm the reduction of recurrence rate in our patients.

Development of the automatic control rod operation system for JOYO. Verification of automatic control rod operation guide system

International Nuclear Information System (INIS)

Terakado, Tsuguo; Suzuki, Shinya; Kawai, Masashi; Aoki, Hiroshi; Ohkubo, Toshiyuki

1999-10-01

The automatic control rod operation system was developed to control the JOYO reactor power automatically in all operation modes(critical approach, cooling system heat up, power ascent, power descent), development began in 1989. Prior to applying the system, verification tests of the automatic control rod operation guide system was conducted during 32nd duty cycles of JOYO' from Dec. 1997 to Feb. 1998. The automatic control rod operation guide system consists of the control rod operation guide function and the plant operation guide function. The control rod operation guide function provides information on control rod movement and position, while the plant operation guide function provide guidance for plant operations corresponding to reactor power changes(power ascent or power descent). Control rod insertion or withdrawing are predicted by fuzzy algorithms. (J.P.N.)

Internal control reporting and accounting quality : Insight "comply-or-explain" internal control regime

OpenAIRE

Cao Thi Thanh, Huyen; Cheung, Tina

2010-01-01

Nowadays, there exist two reporting regimes, rules-based and principle-based (comply-or-explain). In the rules-based environment, researchers have studied the relationship between internal control quality and accounting quality. Prior studies have suggested that reports on internal control are an effective way for investors to evaluate the quality of the firm‟s internal control. By having a sound system of internal control, it creates reliance upon the firm‟s financial reporting. Therefore, t...

Beyond the International Year of Astronomy: The Universe Discovery Guides

Science.gov (United States)

Lawton, B.; Berendsen, M.; Gurton, S.; Smith, D.; NASA SMD Astrophysics EPO Community

2014-07-01

Developed for informal educators and their audiences, the 12 Universe Discovery Guides (UDGs, one per month) are adapted from the Discovery Guides that were developed for the International Year of Astronomy in 2009. The UDGs showcase education and public outreach resources from across more than 30 NASA astrophysics missions and programs. Via collaboration through scientist and educator partnerships, the UDGs aim to increase the impact of individual missions and programs, put their efforts into context, and extend their reach to new audiences. Each of the UDGs has a science topic, an interpretive story, a sky object to view with finding charts, hands-on activities, and connections to recent NASA science discoveries. The UDGs are modular; informal educators can take resources from the guides that they find most useful for their audiences. Attention is being given to audience needs, and field-testing is ongoing. The UDGs are available via downloadable PDFs.

Terminal Sliding Mode Tracking Controller Design for Automatic Guided Vehicle

Science.gov (United States)

Chen, Hongbin

2018-03-01

Based on sliding mode variable structure control theory, the path tracking problem of automatic guided vehicle is studied, proposed a controller design method based on the terminal sliding mode. First of all, through analyzing the characteristics of the automatic guided vehicle movement, the kinematics model is presented. Then to improve the traditional expression of terminal sliding mode, design a nonlinear sliding mode which the convergence speed is faster than the former, verified by theoretical analysis, the design of sliding mode is steady and fast convergence in the limited time. Finally combining Lyapunov method to design the tracking control law of automatic guided vehicle, the controller can make the automatic guided vehicle track the desired trajectory in the global sense as well as in finite time. The simulation results verify the correctness and effectiveness of the control law.

International consensus principles for ethical wildlife control.

Science.gov (United States)

Dubois, Sara; Fenwick, Nicole; Ryan, Erin A; Baker, Liv; Baker, Sandra E; Beausoleil, Ngaio J; Carter, Scott; Cartwright, Barbara; Costa, Federico; Draper, Chris; Griffin, John; Grogan, Adam; Howald, Gregg; Jones, Bidda; Littin, Kate E; Lombard, Amanda T; Mellor, David J; Ramp, Daniel; Schuppli, Catherine A; Fraser, David

2017-08-01

Human-wildlife conflicts are commonly addressed by excluding, relocating, or lethally controlling animals with the goal of preserving public health and safety, protecting property, or conserving other valued wildlife. However, declining wildlife populations, a lack of efficacy of control methods in achieving desired outcomes, and changes in how people value animals have triggered widespread acknowledgment of the need for ethical and evidence-based approaches to managing such conflicts. We explored international perspectives on and experiences with human-wildlife conflicts to develop principles for ethical wildlife control. A diverse panel of 20 experts convened at a 2-day workshop and developed the principles through a facilitated engagement process and discussion. They determined that efforts to control wildlife should begin wherever possible by altering the human practices that cause human-wildlife conflict and by developing a culture of coexistence; be justified by evidence that significant harms are being caused to people, property, livelihoods, ecosystems, and/or other animals; have measurable outcome-based objectives that are clear, achievable, monitored, and adaptive; predictably minimize animal welfare harms to the fewest number of animals; be informed by community values as well as scientific, technical, and practical information; be integrated into plans for systematic long-term management; and be based on the specifics of the situation rather than negative labels (pest, overabundant) applied to the target species. We recommend that these principles guide development of international, national, and local standards and control decisions and implementation. © 2017 The Authors. Conservation Biology published by Wiley Periodicals, Inc. on behalf of Society for Conservation Biology.

THE INTERNAL CONTROL MODELS IN ROMANIA

Directory of Open Access Journals (Sweden)

TEODORESCU CRISTIAN DRAGOȘ

2015-06-01

Full Text Available Internal control is indissolubly linked to business and accounting. Throughout history, domestic and international trade has grown exponentially, which has led to an increasing complexity of internal control, to new methods and techniques to control the business. The literature has presented the first models of internal control in the Sumerian period (3600 - 3200 BC, and the emergence and development of internal control in Egypt, Persia, Greek and Roman Empire, in the Middle Ages till modern times. The purpose of this article is to present the models of internal control in Romania, starting from the principles of the classical model of internal control (COSO model. For a better understanding of the implication of internal control in terms of public and private sector, I have structured the article in the following parts: (a the definition of internal control in the literature; (b the presentation of the COSO model; (c internal control and internal audit in public institutions; (d internal control issues in accounting regulations on the individual and consolidated annual financial statements; (e internal / managerial control; (f conclusions.

Cancer Control Programs in East Asia: Evidence From the International Literature

Directory of Open Access Journals (Sweden)

Malcolm A. Moore

2014-07-01

Full Text Available Cancer is a major cause of mortality and morbidity throughout the world, including the countries of North-East and South-East Asia. Assessment of burden through cancer registration, determination of risk and protective factors, early detection and screening, clinical practice, interventions for example in vaccination, tobacco cessation efforts and palliative care all should be included in comprehensive cancer control programs. The degree to which this is possible naturally depends on the resources available at local, national and international levels. The present review concerns elements of cancer control programs established in China, Taiwan, Korea, and Japan in North-East Asia, Viet Nam, Thailand, Malaysia, and Indonesia as representative larger countries of South-East Asia for comparison, using the published literature as a guide. While major advances have been made, there are still areas which need more attention, especially in South-East Asia, and international cooperation is essential if standard guidelines are to be generated to allow effective cancer control efforts throughout the Far East.

Aging considerations for PWR [pressurized water reactor] control rod drive mechanisms and reactor internals

International Nuclear Information System (INIS)

Ware, A.G.

1988-01-01

This paper describes age-related degradation mechanisms affecting life extension of pressurized water reactor control rod drive mechanisms and reactor internals. The major sources of age-related degradation for control rod drive mechanisms are thermal transients such as plant heatups and cooldowns, latchings and unlatchings, long-term aging effects on electrical insulation, and the high temperature corrosive environment. Flow induced loads, the high-temperature corrosive environment, radiation exposure, and high tensile stresses in bolts all contribute to aging related degradation of reactor internals. Another problem has been wear and fretting of instrument guide tubes. The paper also discusses age-related failures that have occurred to date in pressurized water reactors

Coaxial guiding assembly for internal through-passing probe for eddy current testing of tubes

International Nuclear Information System (INIS)

Kubis, S.; Holec, P.

1989-01-01

The device features guiding cases mounted on springs provided on the peripheries with two rows of radial openings into which are wound flexible fibres parallel with the case axis. The advantage of the design is that active elements which provide the coaxial guiding of the probe are oriented in the direction of the probe movement. This significantly reduces friction between the probe and the internal wall of the tube and thereby also wear of the guide parts of the probe. (J.B.). 2 figs

Control rod guide tube assembly

International Nuclear Information System (INIS)

Jabsen, F.S.

1982-01-01

An improved fuel assembly is described as consisting of a sleeve that engages one end of a control rod guide tube essentially fixing the guide tube to one of the fuel assembly end structures. The end of the sleeve protrudes above the surface of the end fitting. The outer surface of the sleeve has a peripheral groove that engages the resilient sides of a cellular grid or lattice shaped lock. This lock fixes the sleeve in position between the various elements that comprise the end fitting, thereby eliminating a profusion of costly and potentially troublesome nuts, threaded studs and the like that are frequently employed in the fuel assemblies that are presently in use

Good practice guide to internal flexibility policies in companies

OpenAIRE

Goudswaard, A.; Oeij, P.; Brugman, T.

2009-01-01

This report sets out to contribute to the present debate on the need for European companies and their workers to become more flexible and adaptable in the face of ongoing economic change and business restructuring. The guide should therefore provide useful and practical tips for company-level actors concerning the potential benefits of developing more flexible internal workplace policies. Equally, it has been developed to assist practitioners and social partners wishing to review and/or learn...

User's Guide to Biome Information from the United States International Biological Program (IBP). First Edition.

Science.gov (United States)

Hinckley, A. Dexter; Haug, Peter T.

This publication is a guide to the biome research conducted under the International Biological Program. The guide lists biome researchers by interest and by biome as well as a central list. A site list, map, information sources section reporting abstracts, bibliographies, journals, books, evaluations, and data books are also included. Three…

The development of remote controlled linear guide and mast vertical guide of repair robot for RV head CRDM nozzle region in NPP

International Nuclear Information System (INIS)

Kim, Seung Ho; Seo, Yong Chil; Shin, Ho Cheol; Lee, Sung Uk; Jung, Kyung Min

2006-11-01

Reactor vessel which is core instrument in NPP must maintains integrity in the high temperature, high pressure and high radiation environment. Therefore RV must be inspected periodically. If there is defect, the RV must be repaired. A remote controlled linear guide and a vertical guide were developed for a welding repair robot of the RV head CRDM nozzle region. During inspection/maintenance, the RV head is placed RV head storage which is a double circled concrete structure. A linear guide was developed to provide a linear motion to the repair robot, which locates the robot under the RV head. The linear guide also provides a strong support to the robot not to overturn when the robot repairs the RV head. The robot needs lifting about 2m to reach the CRDM nozzle, therefore a vertical guide was developed. For easy traveling, the linear guide is designed 4 parts and the vertical guide is designed 3 parts. A control system was developed to remotely control the guide system which is composed of a connecter box, cables, control box, a computer and a control program. A monitoring system was developed to monitor operation of the guide system

The development of remote controlled linear guide and mast vertical guide of repair robot for RV head CRDM nozzle region in NPP

Energy Technology Data Exchange (ETDEWEB)

Kim, Seung Ho; Seo, Yong Chil; Shin, Ho Cheol; Lee, Sung Uk; Jung, Kyung Min

2006-11-15

Reactor vessel which is core instrument in NPP must maintains integrity in the high temperature, high pressure and high radiation environment. Therefore RV must be inspected periodically. If there is defect, the RV must be repaired. A remote controlled linear guide and a vertical guide were developed for a welding repair robot of the RV head CRDM nozzle region. During inspection/maintenance, the RV head is placed RV head storage which is a double circled concrete structure. A linear guide was developed to provide a linear motion to the repair robot, which locates the robot under the RV head. The linear guide also provides a strong support to the robot not to overturn when the robot repairs the RV head. The robot needs lifting about 2m to reach the CRDM nozzle, therefore a vertical guide was developed. For easy traveling, the linear guide is designed 4 parts and the vertical guide is designed 3 parts. A control system was developed to remotely control the guide system which is composed of a connecter box, cables, control box, a computer and a control program. A monitoring system was developed to monitor operation of the guide system.

COSO internal control integrated framework 2013

CERN Document Server

American Institute of Certified Public Accountants

2013-01-01

Issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO), the 2013 Internal Control – Integrated Framework(Framework) is expected to help organizations design and implement internal control in light of many changes in business and operating environments since the issuance of the original Framework in 1992. The new Framework retains the core definition of internal control and the five components of internal control, and it continues to emphasize the importance of management judgment in designing, implementing, and conducting a system of internal control, and in assessing its effectiveness. It broadens the application of internal control in addressing operations and reporting objectives, and clarifies the requirements for determining what constitutes effective internal control.

International control of nuclear materials

International Nuclear Information System (INIS)

Koponen, Hannu

1989-01-01

Nuclear materials are subject to both national and international safeguards control. The International Atomic Energy Agency (IAEA) takes care of the international safeguards control. The control activities, which are discussed in this article, are carried out according to the agreements between various countries and the IAEA

Guided Synthesis of Control Programs Using UPPAAL

DEFF Research Database (Denmark)

Hune, T.; Larsen, Kim Guldstrand; Pettersson, P.

2000-01-01

the transitions with extra guards. Applying this technique have made synthesis of control programs feasible for a plant producing as many as 60 batches. In comparison, we could only handle plants producing two batches without using guides. The synthesized control programs have been executed in a physical plant...

Evaluation of the Department of the Navy’s (DoN’s) Managers Internal Control (MIC) Manual

Science.gov (United States)

2008-12-01

inaccuracies or exceptions that could indicate internal control problems. • Operating management compares production, sales , or other operating...94 THIS PAGE INTENTIONALLY LEFT BLANK 95 LIST OF REFERENCES Addison-Hewitt Associates. B2B Consultancy. (2004). A guide to the Sarbanes

The influence of internal current loop on transient response performance of I-V droop controlled paralleled DC-DC converters

DEFF Research Database (Denmark)

Wang, Haojie; Han, Minxiao; Guerrero, Josep M.

2017-01-01

The external droop control loop of I-V droop control is designed as a voltage loop with embedded virtual impedance, so the internal current loop plays a major role in the system bandwidth. Thus, in this paper, the influence of internal current loop on transient response performance of I-V droop...... controlled paralleled dc-dc converters is analyzed, which is guided and significant for its industry application. The model which is used for dynamic analysis is built, and the root locus method is used based on the model to analyze the dynamic response of the system by shifting different control parameters...

Fractional Order PIλDμ Control for Maglev Guiding System

Science.gov (United States)

Hu, Qing; Hu, Yuwei

To effectively suppress the external disturbances and parameter perturbation problem of the maglev guiding system, and improve speed and robustness, the electromagnetic guiding system is exactly linearized using state feedback method, Fractional calculus theory is introduced, the order of integer order PID control was extended to the field of fractional, then fractional order PIλDμ Controller was presented, Due to the extra two adjustable parameters compared with traditional PID controller, fractional order PIλDμ controllers were expected to show better control performance. The results of the computer simulation show that the proposed controller suppresses the external disturbances and parameter perturbation of the system effectively; the system response speed was increased; at the same time, it had flexible structure and stronger robustness.

Dose calibrator user and quality control guide

International Nuclear Information System (INIS)

Blanchis, Philippe; Amiot, Marie-Noelle; Moune, Muriel; Bellanger, Anne-Christine; Chauvenet, Bruno; Verdeau, Eric; Gardin, Isabelle; Martineau, Antoine; Ricard, Marcel; Caselles, Olivier; Guilhem, Marie-Therese; Hapdey, Sebastien; Lisbona, Albert; Bonnot-Lours, Sophie; Dumont, Agnes; Lemercier, Valerie; Rizzo-Padoin, Nathalie

2006-06-01

This document is a practical guide for the use and control of dose calibrators which are instruments used for radioactivity measurements. After a recall of the calibrator operation principle, the authors describe all the operations performed on this apparatus all along its lifetime: controls to be performed for device acceptance, aspects to be addressed during installation, controls to be performed before any use, daily controls, more detailed controls, and operations to be performed for maintenance, in case of dysfunctions or for re-calibration

A guide for controlling consumer products containing radioactive substances

International Nuclear Information System (INIS)

1985-01-01

Consumer products are considered regardless of the purpose for which the radionuclide is added. For example, the purpose may be to make use of the ionising radiation emitted by the substance in the product itself (e.g. radioluminescent devices antistatic devices and ionisation chamber smoke detectors), or to make use of some other property of the material where the presence of radiation in the final product is merely adventitious (e.g. thorium gas mantles, ceramics with uranium glazes, and products containing radioactive tracers added to facilitate manufacturing and inspection processes). The Guide does not cover some products containing natural radioactive substances which have not been intentionally added, such as building materials. The Guide does not cover medicinal products and pharmaceuticals, nuclear powered cardiac pacemakers, or electronic equipment, such as television receivers, that emit X-rays. Unlike the 1970 Guide, this Guide does not consider those products, such as EXIT signs, containing gaseous tritium light sources, that would not be supplied directly to members of the public. The Guide is concerned mainly with the exposure arising from consumer products of those persons who are not subject to any regulatory controls for purposes of radiation protection in normal circumstances. Members of the public come under this heading, but not workers involved in the manufacture of consumer products. These workers will normally be subject to separate control. Radiological protection concepts and policy for the control of radioactive consumer products and licensing and post-licensing surveillance are developed

12 CFR 618.8430 - Internal controls.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Internal controls. 618.8430 Section 618.8430 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM GENERAL PROVISIONS Internal Controls § 618.8430 Internal controls. Each Farm Credit institution's board of directors must adopt an internal...

EKF-based fault detection for guided missiles flight control system

Science.gov (United States)

Feng, Gang; Yang, Zhiyong; Liu, Yongjin

2017-03-01

The guided missiles flight control system is essential for guidance accuracy and kill probability. It is complicated and fragile. Since actuator faults and sensor faults could seriously affect the security and reliability of the system, fault detection for missiles flight control system is of great significance. This paper deals with the problem of fault detection for the closed-loop nonlinear model of the guided missiles flight control system in the presence of disturbance. First, set up the fault model of flight control system, and then design the residual generation based on the extended Kalman filter (EKF) for the Eulerian-discrete fault model. After that, the Chi-square test was selected for the residual evaluation and the fault detention task for guided missiles closed-loop system was accomplished. Finally, simulation results are provided to illustrate the effectiveness of the approach proposed in the case of elevator fault separately.

Nuclear reactor internals and control rod handling device

International Nuclear Information System (INIS)

Betancourt, G.N.; Etzel, W.W.

1981-01-01

A method and apparatus for removing, in an essentially continuous operation, the control rods and the upper guide structure from a nuclear reactor vessel during refueling. The apparatus includes a rigid frame which is secured to the upper guide structure after the vessel head is removed. A platform is vertically reciprocable within the frame and is adapted to engage and lift simultaneously all control rod drive shafts to a maximum elevation within the frame. A mechanical interface between the platform and the frame is provided so that continuation of the lifting force on the platform transfers the lift force to the frame whereby the upper guide structure is lifted out of the vessel. Automatically operated stop means are provided to lock the platform and rods in the maximum elevation within the frame in order to prevent accidental dropping of the rods during transfer of the upper guide structure and control rods to a temporary storage area

Efficacy of internal control and controlling business risks

Directory of Open Access Journals (Sweden)

Luminiţa IONESCU

2010-06-01

Full Text Available Companies can gain additional efficiency in designing and implementing or assessing internal control by focusing on only those financial reporting objectives directly applicable to the company’s activities and circumstances, taking a risk based approach to internal control. It is important for any organization to have reliable financial data for internal decision-making purpose. Financial information is often useful in many internal decisions such as product or service pricing. This is why the most important function of the controller is to create and maintain the corporate financial control system. Today’s corporation operates in an increasingly complex environment and the controller’s role is to advice the management of current or future problems of the business environment or to prevent the fraud.

Efficacy of internal control and controlling business risks

OpenAIRE

IONESCU, Luminiţa

2010-01-01

Companies can gain additional efficiency in designing and implementing or assessing internal control by focusing on only those financial reporting objectives directly applicable to the company’s activities and circumstances, taking a risk based approach to internal control. It is important for any organization to have reliable financial data for internal decision-making purpose. Financial information is often useful in many internal decisions such as product or service pricing. This is why th...

Recent developments for the Large Binocular Telescope Guiding Control Subsystem

Science.gov (United States)

Golota, T.; De La Peña, M. D.; Biddick, C.; Lesser, M.; Leibold, T.; Miller, D.; Meeks, R.; Hahn, T.; Storm, J.; Sargent, T.; Summers, D.; Hill, J.; Kraus, J.; Hooper, S.; Fisher, D.

2014-07-01

The Large Binocular Telescope (LBT) has eight Acquisition, Guiding, and wavefront Sensing Units (AGw units). They provide guiding and wavefront sensing capability at eight different locations at both direct and bent Gregorian focal stations. Recent additions of focal stations for PEPSI and MODS instruments doubled the number of focal stations in use including respective motion, camera controller server computers, and software infrastructure communicating with Guiding Control Subsystem (GCS). This paper describes the improvements made to the LBT GCS and explains how these changes have led to better maintainability and contributed to increased reliability. This paper also discusses the current GCS status and reviews potential upgrades to further improve its performance.

Employee quality, monitoring environment and internal control

Directory of Open Access Journals (Sweden)

Chunli Liu

2017-03-01

Full Text Available We investigate the effect of internal control employees (ICEs on internal control quality. Using special survey data from Chinese listed firms, we find that ICE quality has a significant positive influence on internal control quality. We examine the effect of monitoring on this result and find that the effect is more pronounced for firms with strict monitoring environments, especially when the firms implement the Chinese internal control regulation system (CSOX, have higher institutional ownership or attach greater importance to internal control. Our findings suggest that ICEs play an important role in the design and implementation of internal control systems. Our study should be of interest to both top managers who wish to improve corporate internal control quality and regulators who wish to understand the mechanisms of internal control monitoring.

Computer tomography guided lung biopsy using interactive breath-hold control

DEFF Research Database (Denmark)

Ashraf, Haseem; Krag-Andersen, Shella; Naqibullah, Matiullah

2017-01-01

Background: Interactive breath-hold control (IBC) may improve the accuracy and decrease the complication rate of computed tomography (CT)-guided lung biopsy, but this presumption has not been proven in a randomized study. Methods: Patients admitted for CT-guided lung biopsy were randomized...

The Neural Mechanisms Underlying Internally and Externally Guided Task Selection

Science.gov (United States)

Orr, Joseph M.; Banich, Marie T.

2013-01-01

While some prior work suggests that medial prefrontal cortex (MFC) regions mediate freely chosen actions, other work suggests that the lateral frontal pole (LFP) is responsible for control of abstract, internal goals. The present study uses fMRI to determine whether the voluntary selection of a task in pursuit of an overall goal relies on MFC regions or the LFP. To do so, we used a modified voluntary task switching (VTS) paradigm, in which participants choose an individual task to perform on each trial (i.e., a subgoal), under instructions to perform the tasks equally often and in a random order (i.e. the overall goal). In conjunction, we examined patterns of activation in the face of irrelevant, but task-related external stimuli that might nonetheless influence task selection. While there was some evidence that the MFC was involved in voluntary task selection, we found that the LFP and anterior insula (AI) were crucial to task selection in the pursuit of an overall goal. In addition, activation of the LFP and AI increased in the face of environmental stimuli that might serve as an interfering or conflicting external bias on voluntary task choice. These findings suggest that the LFP supports task selection according to abstract, internal goals, and leaves open the possibility that MFC may guide action selection in situations lacking in such top-down biases. As such, the current study represents a critical step towards understanding the neural underpinnings of how tasks are selected voluntarily to enable an overarching goal. PMID:23994316

The internal control of tax

OpenAIRE

E. B. Shuvalova; L. A. Butenko; Ju. A. Rudenko

2016-01-01

The aim of the research is to study the theoretical and practical issues of internal fiscal control. Internal tax control system requires the development of methodological tools, its scientific basis and practical recommendations for the application. This difficult task is now solved only in organizations, which are the largest taxpayers. For small and medium-sized businesses in the organization of internal fiscal control may improve the quality of the accounting organization of the company. ...

Internal budget control

Directory of Open Access Journals (Sweden)

MSc. Mervete Shala

2011-06-01

Generally, duties of internal control officers within ministries and institutions must be clearly divided to reduce the risk of inco-rrect behaviour. Operations of an efficient control mechanism influence and ensure conditions for rule of law, good governance, and democracy.

48 CFR 819.7112 - Internal controls.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Internal controls. 819... SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS VA Mentor-Protégé Program 819.7112 Internal controls. (a) OSDBU... Program objectives. OSDBU will establish internal controls as checks and balances applicable to the...

Development of Safety Review Guide for the Periodic Safety Review of Reactor Vessel Internals

International Nuclear Information System (INIS)

Park, Jeongsoon; Ko, Hanok; Kim, Seonjae; Jhung, Myungjo

2013-01-01

Aging management of the reactor vessel internals (RVIs) is one of the important issues for long-term operation of nuclear power plants (NPPs). Safety review on the assessment and management of the RVI aging is conducted through the process of a periodic safety review (PSR). The regulatory body should check that reactor facilities sustain safety functions in light of degradation due to aging and that the operator of a nuclear power reactor establishes and implements management program to deal with degradation due to aging in order to guarantee the safety functions and the safety margin as a result of PSR. KINS(Korea Institute of Nuclear Safety) has utilized safety review guides (SRG) which provide guidance to KINS staffs in performing safety reviews in order to assure the quality and uniformity of staff safety reviews. The KINS SRGs for the continued operation of pressurized water reactors (PWRs) published in 2006 contain areas of review regarding aging management of RVIs in chapter 2 (III.2.15, Appendix 2.0.1). However unlike the SRGs for the continued operation, KINS has not officially published the SRGs for the PSR of PWRs, but published them as a form of the research report. In addition to that, the report provides almost same review procedures for aging assessment and management of RVIs with the ones provided in the SRGs for the continued operation, it cannot provide review guidance specific to PSRs. Therefore, a PSR safety review guide should be developed for RVIs in PWRs. In this study, a draft PSR safety review guide for reactor vessel internals in PWRs is developed and provided. In this paper, a draft PSR safety review guide for reactor vessel internals (PSR SRG-RVIs) in PWRs is introduced and main contents of the draft are provided. However, since the PSR safety review guides for areas other than RVIs in the pressurized water reactors (PWRs) are expected to be developed in the near future, the draft PSR SRG-RVIs should be revisited to be compatible with

48 CFR 519.7014 - Internal controls.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Internal controls. 519... SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS GSA Mentor-Protégé Program 519.7014 Internal controls. (a) The GSA Mentor-Protégé Program Manager will manage the Program. Internal controls will be established by...

Cognitive Control Network Contributions to Memory-Guided Visual Attention.

Science.gov (United States)

Rosen, Maya L; Stern, Chantal E; Michalka, Samantha W; Devaney, Kathryn J; Somers, David C

2016-05-01

Visual attentional capacity is severely limited, but humans excel in familiar visual contexts, in part because long-term memories guide efficient deployment of attention. To investigate the neural substrates that support memory-guided visual attention, we performed a set of functional MRI experiments that contrast long-term, memory-guided visuospatial attention with stimulus-guided visuospatial attention in a change detection task. Whereas the dorsal attention network was activated for both forms of attention, the cognitive control network(CCN) was preferentially activated during memory-guided attention. Three posterior nodes in the CCN, posterior precuneus, posterior callosal sulcus/mid-cingulate, and lateral intraparietal sulcus exhibited the greatest specificity for memory-guided attention. These 3 regions exhibit functional connectivity at rest, and we propose that they form a subnetwork within the broader CCN. Based on the task activation patterns, we conclude that the nodes of this subnetwork are preferentially recruited for long-term memory guidance of visuospatial attention. Published by Oxford University Press 2015. This work is written by (a) US Government employee(s) and is in the public domain in the US.

A new adjustable parallel drill guide for internal fixation of femoral neck fracture: a developmental and experimental study

OpenAIRE

Yuenyongviwat, Varah; Tuntarattanapong, Pakjai; Tangtrakulwanich, Boonsin

2016-01-01

Background Internal fixation is one treatment for femoral neck fracture. Some devices and techniques reported improved accuracy and decreased fluoroscopic time. However, these are not widely used nowadays due to the lack of available special instruments and techniques. To improve the surgical procedure, the authors designed a new adjustable drill guide and tested the efficacy of the device. Methods The authors developed a new adjustable drill guide for cannulated screw guide wire insertion fo...

TEDS-M 2008 User Guide for the International Database. Supplement 2: National Adaptations of the TEDS-M Questionnaires

Science.gov (United States)

Brese, Falk, Ed.

2012-01-01

This supplement contains all adaptations made by countries to the international version of the TEDS-M questionnaires under careful supervision of and approval by the TEDS-M International Study Center at Michigan State University. This information provides users of the TEDS-M International Database with a guide to evaluate the availability of…

Engine Performance (Section C: Emission Control Systems). Auto Mechanics Curriculum Guide. Module 3. Instructor's Guide.

Science.gov (United States)

Rains, Larry

This engine performance (emission control systems) module is one of a series of competency-based modules in the Missouri Auto Mechanics Curriculum Guide. Topics of this module's five units are: positive crankcase ventilation (PCV) and evaporative emission control systems; exhaust gas recirculation (EGR); air injection and catalytic converters;…

Regulatory Control of Radiation Sources. Safety Guide

International Nuclear Information System (INIS)

2009-01-01

This Safety Guide is intended to assist States in implementing the requirements established in Safety Standards Series No. GS-R-1, Legal and Governmental Infrastructure for Nuclear, Radiation, Radioactive Waste and Transport Safety, for a national regulatory infrastructure to regulate any practice involving radiation sources in medicine, industry, research, agriculture and education. The Safety Guide provides advice on the legislative basis for establishing regulatory bodies, including the effective independence of the regulatory body. It also provides guidance on implementing the functions and activities of regulatory bodies: the development of regulations and guides on radiation safety; implementation of a system for notification and authorization; carrying out regulatory inspections; taking necessary enforcement actions; and investigating accidents and circumstances potentially giving rise to accidents. The various aspects relating to the regulatory control of consumer products are explained, including justification, optimization of exposure, safety assessment and authorization. Guidance is also provided on the organization and staffing of regulatory bodies. Contents: 1. Introduction; 2. Legal framework for a regulatory infrastructure; 3. Principal functions and activities of the regulatory body; 4. Regulatory control of the supply of consumer products; 5. Functions of the regulatory body shared with other governmental agencies; 6. Organization and staffing of the regulatory body; 7. Documentation of the functions and activities of the regulatory body; 8. Support services; 9. Quality management for the regulatory system.

Importance of Internal Audit and Internal Control in an organization - Case Study

OpenAIRE

Bubilek, Olga

2017-01-01

This research is a descriptive case study of a company. It presents concepts of the internal audit and internal control based on an example of a Finnish company. The research examines the role and importance that internal audit and internal controls have in an organization. The main research question is “What is the role and importance of internal audit and internal control in an organization” Additional sub-questions relating to the case company that will allow for better understanding of...

COLLABORATIVE GUIDE: A REEF MANAGER'S GUIDE TO ...

Science.gov (United States)

Innovative strategies to conserve the world's coral reefs are included in a new guide released today by NOAA, and the Australian Great Barrier Reef Marine Park Authority, with author contributions from a variety of international partners from government agencies, non-governmental organizations, and academic institutions. Referred to as A Reef Manager's Guide to Coral Bleaching, the guide will provide coral reef managers with the latest scientific information on the causes of coral bleaching and new management strategies for responding to this significant threat to coral reef ecosystems. Innovative strategies to conserve the world's coral reefs are included in a new guide released today by NOAA, and the Australian Great Barrier Reef Marine Park Authority, with author contributions from a variety of international partners from government agencies, non-governmental organizations, and academic institutions. Dr. Jordan West, of the National Center for Environmental Assessment, was a major contributor to the guide. Referred to as

Argue internal audit on how to promote the nuclear power enterprise internal control

International Nuclear Information System (INIS)

Li Xiaoming

2012-01-01

In order to strengthen and standardize enterprise internal control, improve the management level and risk prevention ability, five departments jointly established the basic rules of internal control in enterprises, large and medium-sized enterprises as the national power enterprise, the enterprise internal audit executive power in strengthening and perfecting internal control, and in the enterprise internal control of play an active role. (author)

Internal Control Organization Procedure

OpenAIRE

Radu Dorin Lenghel

2013-01-01

Internal control represents the totality of policies and procedures adopted by management, which contribute: to the fulfilment of managerial objectives, to the prevention and detection of frauds or errors, to the accuracy and exhaustiveness of accounting entries, as well as to the preparation in due course of financial accounting information. Internal control represents a managerial instrument which assures the fulfilment of objectives of the entity, being an ongoing process in which administ...

Radiological control guide for decommissioning of the TRIGA mark-2, 3

International Nuclear Information System (INIS)

Lee, Bong Jae

2000-08-01

The purpose of radiological control for TRIGA mark-2, 3 research reactors and facilities at the KAERI Seoul site, which are to be decommissioned, is in minimizing the radiation exposure for workers and in preventing the release of the radioactive materials to the environment. In order to accomplish these goal, the radiological control guide will be prepared during the decommissioning activities. Therefore, it is expected that this technical report can be used in preparing radiological control guide for safety decommissioning of the TRIGA mark-2, 3

Internal controls subjects at insurance companies

OpenAIRE

Прокопенко, Жанна Володимирівна

2015-01-01

The problematic issues of determining the authorities of the internal controls subjects at insurance companies have been elucidated. The list of internal controls subjects of insurer depending on the form of control as well as the purposefulness of such kind of control have been determined.

Sensor guided control and navigation with intelligent machines. Final technical report

Energy Technology Data Exchange (ETDEWEB)

Ghosh, Bijoy K.

2001-03-26

This item constitutes the final report on ''Visionics: An integrated approach to analysis and design of intelligent machines.'' The report discusses dynamical systems approach to problems in robust control of possibly time-varying linear systems, problems in vision and visually guided control, and, finally, applications of these control techniques to intelligent navigation with a mobile platform. Robust design of a controller for a time-varying system essentially deals with the problem of synthesizing a controller that can adapt to sudden changes in the parameters of the plant and can maintain stability. The approach presented is to design a compensator that simultaneously stabilizes each and every possible mode of the plant as the parameters undergo sudden and unexpected changes. Such changes can in fact be detected by a visual sensor and, hence, visually guided control problems are studied as a natural consequence. The problem here is to detect parameters of the plant and maintain st ability in the closed loop using a ccd camera as a sensor. The main result discussed in the report is the role of perspective systems theory that was developed in order to analyze such a detection and control problem. The robust control algorithms and the visually guided control algorithms are applied in the context of a PUMA 560 robot arm control where the goal is to visually locate a moving part on a mobile turntable. Such problems are of paramount importance in manufacturing with a certain lack of structure. Sensor guided control problems are extended to problems in robot navigation using a NOMADIC mobile platform with a ccd and a laser range finder as sensors. The localization and map building problems are studied with the objective of navigation in an unstructured terrain.

A Review Of Design And Control Of Automated Guided Vehicle Systems

NARCIS (Netherlands)

T. Le-Anh (Tuan); M.B.M. de Koster (René)

2004-01-01

textabstractThis paper presents a review on design and control of automated guided vehicle systems. We address most key related issues including guide-path design, estimating the number of vehicles, vehicle scheduling, idle-vehicle positioning, battery management, vehicle routing, and conflict

Internal budget control

OpenAIRE

MSc. Mervete Shala

2011-01-01

Internal control is established by the Government to ensure effective and proper operations of ministries, institutions and generally of all public agencies, in compliance with the law, the goals and objectives stated by them, to provide protection against abuse and mismanagement or poor governance. The instrument of internal audit entails a series of mechanisms which aim at enabling budgetary policies compliance, such as: financial reporting; effective system of communication between mana...

Internal corrosion control of northern pipelines

Energy Technology Data Exchange (ETDEWEB)

Papavinasam, S.

2005-02-01

The general causes of internal corrosion in pipelines were discussed along with the methods to control them. Efficient methods are needed to determine chemical efficiency for mitigating internal corrosion in transmission pipelines, particularly those used in environmentally sensitive regions in the Arctic where harsh environmental conditions prevail. According to the Office of Pipeline Safety, 15 per cent of pipeline failures in the United States from 1994 to 2000 were caused by internal corrosion. Since pipelines in the United States are slightly older than Canadian pipelines, internal corrosion is a significant issue from a Canadian perspective. There are 306,618 km of energy-related pipelines in western Canada. Between April 2001 and March 2002 there were 808 failures, of which 425 failures resulted from internal corrosion. The approach to control internal corrosion comprises of dehydrating the gases at production facilities; controlling the quality of corrosive gases such as carbon dioxide and hydrogen sulphide; and, using internal coatings. The approaches to control internal corrosion are appropriate, when supplemented by adequate integrity management program to ensure that corrosive liquids do not collect, over the operational lifetime of the pipelines, at localized areas. It was suggested that modeling of pipeline operations may need improvement. This paper described the causes, prediction and control of internal pitting corrosion. It was concluded that carbon steel equipment can continue to be used reliably and safely as pipeline materials for northern pipelines if the causes that lead to internal corrosion are scientifically and accurately predicted, and if corrosion inhibitors are properly evaluated and applied. 5 figs.

A Review Of Design And Control Of Automated Guided Vehicle Systems

OpenAIRE

Le-Anh, Tuan; Koster, René

2004-01-01

textabstractThis paper presents a review on design and control of automated guided vehicle systems. We address most key related issues including guide-path design, estimating the number of vehicles, vehicle scheduling, idle-vehicle positioning, battery management, vehicle routing, and conflict resolution. We discuss and classify important models and results from key publications in literature on automated guided vehicle systems, including often-neglected areas, such as idle-vehicle positionin...

INTERNAL CONTROL OF INVESTMENT PROJECTS

Directory of Open Access Journals (Sweden)

Yu. N. Yudenkov

2010-01-01

Full Text Available Estimation and technics of the account of expenses, efficiency, financial result should enter into the list of regular checks from service of internal control that demands corresponding vocational training of internal controlers which should own methods of an estimation of expediency of acquisition of long-term actives.

Employee quality, monitoring environment and internal control

OpenAIRE

Chunli Liu; Bin Lin; Wei Shu

2017-01-01

We investigate the effect of internal control employees (ICEs) on internal control quality. Using special survey data from Chinese listed firms, we find that ICE quality has a significant positive influence on internal control quality. We examine the effect of monitoring on this result and find that the effect is more pronounced for firms with strict monitoring environments, especially when the firms implement the Chinese internal control regulation system (CSOX), have higher institutional ow...

Pace-capture-guided ablation after contact-force-guided pulmonary vein isolation: results of the randomized controlled DRAGON trial.

Science.gov (United States)

Masuda, Masaharu; Fujita, Masashi; Iida, Osamu; Okamoto, Shin; Ishihara, Takayuki; Nanto, Kiyonori; Kanda, Takashi; Sunaga, Akihiro; Tsujimura, Takuya; Matsuda, Yasuhiro; Ohashi, Takuya; Uematsu, Masaaki

2017-11-17

Before the discovery of contact-force guidance, eliminating pacing capture along the pulmonary vein (PV) isolation line had been reported to improve PV isolation durability and rhythm outcomes. DRAGON (UMIN-CTR, UMIN000015332) aimed to elucidate the efficacy of pace-capture-guided ablation following contact-force-guided PV isolation ablation in paroxysmal atrial fibrillation (AF) patients. A total of 156 paroxysmal AF patients with AF-trigger ectopies from any of the four PVs induced by isoproterenol were randomly assigned to undergo pace-capture-guided ablation along a contact-force-guided isolation line around AF-trigger PVs (PC group, n = 76) or contact-force-guided PV isolation ablation alone (control group, n = 80). Follow-up of at least 1 year commenced with serial 24 h Holter and symptom-triggered ambulatory monitoring. There was no significant difference in acute PV reconnection rates during a 20 min waiting period after the last ablation or adenosine infusion testing between the PC and the control groups (per patient, 21% vs. 27%, P = 0.27; per AF-trigger PV, 5.9% vs. 7.3%, P = 0.70; and per non-AF-trigger PV, 7.1% vs. 7.4%, P = 0.92). Atrial tachyarrhythmia-free survival rates off antiarrhythmic drugs after the initial session were comparable at 19.3 ± 6.2 months between the two groups (82% vs. 80%, P = 0.80). Among 22 patients who required a second ablation procedure, there was no difference between the PC and the control groups in the PV reconnection rates at both previously AF-trigger (29% vs. 43%, P = 0.70) and non-AF-trigger PVs (18% vs. 19%, P = 0.88). Pace-capture-guided ablation performed after contact-force-guided PV isolation demonstrated no improvement in PV isolation durability or rhythm outcome. Published on behalf of the European Society of Cardiology. All rights reserved. © The Author 2017. For permissions, please email: journals.permissions@oup.com.

Cervical Gross Tumor Volume Dose Predicts Local Control Using Magnetic Resonance Imaging/Diffusion-Weighted Imaging—Guided High-Dose-Rate and Positron Emission Tomography/Computed Tomography—Guided Intensity Modulated Radiation Therapy

Energy Technology Data Exchange (ETDEWEB)

Dyk, Pawel; Jiang, Naomi; Sun, Baozhou; DeWees, Todd A. [Department of Radiation Oncology, Washington University School of Medicine, St Louis, Missouri (United States); Fowler, Kathryn J.; Narra, Vamsi [Department of Diagnostic Radiology, Mallinckrodt Institute of Radiology, Washington University School of Medicine, St Louis, Missouri (United States); Garcia-Ramirez, Jose L.; Schwarz, Julie K. [Department of Radiation Oncology, Washington University School of Medicine, St Louis, Missouri (United States); Grigsby, Perry W., E-mail: pgrigsby@wustl.edu [Department of Radiation Oncology, Washington University School of Medicine, St Louis, Missouri (United States); Division of Nuclear Medicine, Mallinckrodt Institute of Radiology, Washington University School of Medicine, St Louis, Missouri (United States); Division of Gynecologic Oncology, Mallinckrodt Institute of Radiology, Washington University School of Medicine, St Louis, Missouri (United States); Alvin J. Siteman Cancer Center, Washington University School of Medicine, St Louis, Missouri (United States)

2014-11-15

Purpose: Magnetic resonance imaging/diffusion weighted-imaging (MRI/DWI)-guided high-dose-rate (HDR) brachytherapy and {sup 18}F-fluorodeoxyglucose (FDG) — positron emission tomography/computed tomography (PET/CT)-guided intensity modulated radiation therapy (IMRT) for the definitive treatment of cervical cancer is a novel treatment technique. The purpose of this study was to report our analysis of dose-volume parameters predicting gross tumor volume (GTV) control. Methods and Materials: We analyzed the records of 134 patients with International Federation of Gynecology and Obstetrics stages IB1-IVB cervical cancer treated with combined MRI-guided HDR and IMRT from July 2009 to July 2011. IMRT was targeted to the metabolic tumor volume and lymph nodes by use of FDG-PET/CT simulation. The GTV for each HDR fraction was delineated by use of T2-weighted or apparent diffusion coefficient maps from diffusion-weighted sequences. The D100, D90, and Dmean delivered to the GTV from HDR and IMRT were summed to EQD2. Results: One hundred twenty-five patients received all irradiation treatment as planned, and 9 did not complete treatment. All 134 patients are included in this analysis. Treatment failure in the cervix occurred in 24 patients (18.0%). Patients with cervix failures had a lower D100, D90, and Dmean than those who did not experience failure in the cervix. The respective doses to the GTV were 41, 58, and 136 Gy for failures compared with 67, 99, and 236 Gy for those who did not experience failure (P<.001). Probit analysis estimated the minimum D100, D90, and Dmean doses required for ≥90% local control to be 69, 98, and 260 Gy (P<.001). Conclusions: Total dose delivered to the GTV from combined MRI-guided HDR and PET/CT-guided IMRT is highly correlated with local tumor control. The findings can be directly applied in the clinic for dose adaptation to maximize local control.

Delphi Method Validation of a Procedural Performance Checklist for Insertion of an Ultrasound-Guided Internal Jugular Central Line.

Science.gov (United States)

Hartman, Nicholas; Wittler, Mary; Askew, Kim; Manthey, David

2016-01-01

Placement of ultrasound-guided central lines is a critical skill for physicians in several specialties. Improving the quality of care delivered surrounding this procedure demands rigorous measurement of competency, and validated tools to assess performance are essential. Using the iterative, modified Delphi technique and experts in multiple disciplines across the United States, the study team created a 30-item checklist designed to assess competency in the placement of ultrasound-guided internal jugular central lines. Cronbach α was .94, indicating an excellent degree of internal consistency. Further validation of this checklist will require its implementation in simulated and clinical environments. © The Author(s) 2014.

Nut tightening and bolt tension measuring apparatus for control guide tube with ultrasonic probe

International Nuclear Information System (INIS)

Lanzoni, M.

1985-01-01

Control rods are guided by elements set in the prolongation of the fuel assembly guide-tubes in which the control rods are introduced. These elements are inside guide-tubes fixed on the upper plate of the core by means of pins having a thread on which a nut is screwed bearing on the foot of the guide-tube. The pin is fixed inside the upper core plate by means of its lower part. An insufficient mechanical resistance and even failures have been observed with these pins. These failures have been involved by an unadequate screwing. The present invention proposes to control the pretension during the operation itself with an ultrasonic test [fr

49 CFR 193.2631 - Internal corrosion control.

Science.gov (United States)

2010-10-01

... 49 Transportation 3 2010-10-01 2010-10-01 false Internal corrosion control. 193.2631 Section 193... GAS FACILITIES: FEDERAL SAFETY STANDARDS Maintenance § 193.2631 Internal corrosion control. Each component that is subject to internal corrosive attack must be protected from internal corrosion by— (a...

15 CFR 752.11 - Internal Control Programs.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Internal Control Programs. 752.11... COMPREHENSIVE LICENSE § 752.11 Internal Control Programs. (a) Scope—(1) Introduction. It is through Internal Control Programs (ICPs) that the SCL holder and the consignee assure that exports and reexports are not...

48 CFR 719.273-10 - Internal controls.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Internal controls. 719.273...égé Program 719.273-10 Internal controls. (a) OSDBU will oversee the Program and will work in... objectives. OSDBU will establish internal controls as checks and balances applicable to the Program. These...

The Principles of Organization of Internal Control of Companies

Directory of Open Access Journals (Sweden)

Panteleiev

2017-02-01

Full Text Available The question to give a convincing assessment of the Rules of the internal controls and present them in the form of principles of organization of internal control. Since the final decision in the form of an exhaustive list and universal principles of internal control is no scientific research continues these principles. It is necessary to examine the logic of the main provisions of the organization's internal control due consideration of the requirements of international practice controls and propose principles of internal control. For this purpose, conducted a critical analysis of the main provisions of internal controls contained in the publications and in the regulations on internal control proceedings. Synthesis of articles of authors of lead scientific and practical journal Ukraine "Accounting and Auditing" for the 1994-2015 biennium pointed out that despite the coverage of current journal articles provisions, principles, requirements, rules and other modern techniques. On internal control and comprehensive set of reasonable response to the organization and classification of internal control is absent. This leads to continue the search key components of the organization's internal control. The above basic concepts in publications on the organization of internal control were used in the formation of a set of principles of control. According to the requirements of the OECD field of internal control includes risk management, cost control, change in control, complete information to guarantee the effectiveness of internal control systems, providing the ability to make decisions and so on. COSO model contains an exhaustive list of five components. The results of the questionnaire trainees have provided compelling arguments for classifying and establishing relevant principles of organization and internal controls were rejected. A list of the basic principles of the organization of internal control, which consists of 25 elements that are shaped

Evaluation of friction forces between control bars and guide tubes of CAREM fuel element

International Nuclear Information System (INIS)

Ghiselli, Alberto M.; Fiori, Jose M.; Yedros, Pablo A.

2003-01-01

The design of the MSAC (Mecanismo del Sistema de ajuste y control, Mechanism of the Adjustment and control system, MACS) for CAREM reactor shall consider all loads that the reactor shall support during its operation. Several charges are originated by friction forces produced on contact points of the control Bars/Guide tubes assembly against other components. A test facility was designed and manufactured for the determination of friction components and the damping characteristics of the assembly formed by guide tubes fuel element, the control bars and the guide of the bar of the MACS. In this work a description of the test performed and the results obtained is presented. (author)

Machine Shop. Module 8: CNC (Computerized Numerical Control). Instructor's Guide.

Science.gov (United States)

Crosswhite, Dwight

This document consists of materials for a five-unit course on the following topics: (1) safety guidelines; (2) coordinates and dimensions; (3) numerical control math; (4) programming for numerical control machines; and (5) setting and operating the numerical control machine. The instructor's guide begins with a list of competencies covered in the…

To Keep and Bear Arms: Gun Control and the Second Amendment. Teacher's Guide.

Science.gov (United States)

Edwards, Amy N.; Walker, Tim

This teacher's guide is designed to accompany the two-part videotape "To Keep and Bear Arms: Gun Control and the Second Amendment." The videotape and teacher's guide should help students to: (1) understand the history of the Second Amendment; (2) examine how guns and gun control laws affect people's lives; (3) compare and contrast the…

Extra Luminal Entrapment of Guide Wire; A Rare Complication of Central Venous Catheter Placement in Right Internal Jugular Vein.

Science.gov (United States)

Ansari, Md Abu Masud; Kumar, Naveen; Kumar, Shailesh; Kumari, Sarita

2016-10-01

Central venous Catheterization (CVC) is a commonly performed procedure for venous access. It is associated with several complications. We report a rare case of extra luminal entrapment of guide wire during CVC placement in right jugular vein. We report a case of 28 years old female patient presented in our emergency with history of entrapped guide wire in right side of neck during CVC. X-ray showed coiling of guide wire in neck. CT Angiography showed guide wire coursing in between common carotid artery and internal jugular vein (IJV), closely abutting the wall of both vessels. The guide wire was coiled with end coursing behind the esophageal wall. Guide wire was removed under fluoroscopic guide manipulation under local anesthesia. We want to emphasize that even though CVC placement is common and simple procedure, serious complication can occur in hands of untrained operator. The procedure should be performed under supervision, if done by trainee. Force should never be applied to advance the guide wire if resistance is encountered.

49 CFR 192.477 - Internal corrosion control: Monitoring.

Science.gov (United States)

2010-10-01

... 49 Transportation 3 2010-10-01 2010-10-01 false Internal corrosion control: Monitoring. 192.477... Control § 192.477 Internal corrosion control: Monitoring. If corrosive gas is being transported, coupons... internal corrosion. Each coupon or other means of monitoring internal corrosion must be checked two times...

Internal combustion engine and method for control

Science.gov (United States)

Brennan, Daniel G

2013-05-21

In one exemplary embodiment of the invention an internal combustion engine includes a piston disposed in a cylinder, a valve configured to control flow of air into the cylinder and an actuator coupled to the valve to control a position of the valve. The internal combustion engine also includes a controller coupled to the actuator, wherein the controller is configured to close the valve when an uncontrolled condition for the internal engine is determined.

Influence Implementation Internal Control To Quality Audit Internal Education Consultant In Indonesian

Directory of Open Access Journals (Sweden)

Nur Zeina Maya Sari

2015-08-01

Full Text Available Abstract This research focus to quality audit internal with accountancy Inspection. Hameed 1995 found that the most important factors that affect auditing quality are auditors experience honesty and the knowledge in accounting and auditing standards. Research into this express an inspection of Intern Accountancy amp attributed to Monetary inspection an consultant education with quality. Audit quality is obtained by a process of identifying and administering the activities needed to achieve the quality objectives . Since an entityamp8223s internal control is under the purview of its audit committee Krishnan 2005 the relation between audit committee quality and internal control weaknesses is a subject to be investigated. The methodology used is a quantitative analysis by examining the relationship between variables conceptually. While some study its accounting activity. In self-supporting internal control. Internal control is defined as a process affected by an entitys board of directors management and other personnel designed to provide reasonable assurance regarding the achievement of objectives International Organization of Supreme Audit Institutions 1998 its bearing by reporting level an environment and reduction conduct in reporting result of mistake. What finally involvement by Audit Intern can be of benefit. In addition to researching into proposing Audit Intern can improve the target of consultant education going concern.

The ViewRay system: magnetic resonance-guided and controlled radiotherapy.

Science.gov (United States)

Mutic, Sasa; Dempsey, James F

2014-07-01

A description of the first commercially available magnetic resonance imaging (MRI)-guided radiation therapy (RT) system is provided. The system consists of a split 0.35-T MR scanner straddling 3 (60)Co heads mounted on a ring gantry, each head equipped with independent doubly focused multileaf collimators. The MR and RT systems share a common isocenter, enabling simultaneous and continuous MRI during RT delivery. An on-couch adaptive RT treatment-planning system and integrated MRI-guided RT control system allow for rapid adaptive planning and beam delivery control based on the visualization of soft tissues. Treatment of patients with this system commenced at Washington University in January 2014. Copyright © 2014 Elsevier Inc. All rights reserved.

INTERNAL CONTROL IN PUBLIC HEALTH SERVICES INSTITUTIONS

Directory of Open Access Journals (Sweden)

Ludmila FRUMUSACHI

2017-06-01

Full Text Available Internal control has a special role in the efficient organization of the entity’s management. The components of this control in the institutions of public health service are determined by the specific character of these institutions and National Standards of Internal Control in the Public Sector. The system of internal control in the institutions of public health service has the capacity to canalize the effort of the whole institution for the achievement of proposed objectives, to signalize permanently the dysfunctionalities about the quality of medical services and the deviations and to operate timely corrective measures for eliminating the noticed problems. In this regard the managers are obliged to analyse and to resize the system of internal control when in the organizational structure appear substantial changes.

Guide for the control and recording of radioactive wastes

International Nuclear Information System (INIS)

1987-01-01

This guide present the aspects related to the control and recording of radioactive wastes in their points of origin. Then it is of great importance to fulfill these instructions so as to achieve a successful management of radioactive waste

Internal control system

OpenAIRE

Pavésková, Ivana

2014-01-01

Dissertation focuse on the internal control system in the enterprises, aims to map the control system by focusing on the purchasing department. I focused on the purchasing process, because with an increasing trends of outsourcing services and the increasing interconnectedness of enterprises increases the risk of fraud currently in the purchasing process. To the research was selected the sample of companies from the banking and non-banking environment, to which were sent a questionnaire focusi...

Ultrasound-Guided Percutaneous Dilational Tracheostomy: A Systematic Review of Randomized Controlled Trials and Meta-Analysis.

Science.gov (United States)

Gobatto, André L N; Besen, Bruno A M P; Cestari, Mino; Pelosi, Paolo; Malbouisson, Luiz M S

2018-01-01

Percutaneous dilational tracheostomy (PDT) is a common and increasingly used procedure in the intensive care unit (ICU). It is usually performed with bronchoscopy guidance. Ultrasound has emerged as a useful tool in order to assist PDT, potentially improving its success rate and reducing procedural-related complications. To investigate whether the ultrasound-guided PDT is equivalent or superior to the bronchoscopy-guided or anatomical landmarks-guided PDT with regard to procedural-related and clinical complications. A systematic review of randomized clinical trials was conducted comparing an ultrasound-guided PDT to the control groups (either a bronchoscopy-guided PDT or an anatomical landmark-guided PDT) in patients undergoing a PDT in the ICU. The primary outcome was the incidence of major procedural-related and clinical complication rates. The secondary outcome was the incidence of minor complication rates. Random-effect meta-analyzes were used to pool the results. Four studies fulfilled the inclusion criteria and they were analyzed. The studies included 588 participants. There were no differences in the major complication rates between the patients who were assigned to the ultrasound-guided PDT when compared to the control groups (pooled risk ratio [RR]: 0.48; 95% confidence interval [CI]: 0.13-1.71, I 2 = 0%). The minor complication rates were not different between the groups, but they had a high heterogeneity (pooled RR: 0.49; 95% CI 0.16-1.50; I 2 = 85%). The sensitivity analyzes that only included the randomized controlled trials that used a landmark-guided PDT as the control group showed lower rates of minor complications in the ultrasound-guided PDT group (pooled RR: 0.55; 95% CI: 0.31-0.98, I 2 = 0%). The ultrasound-guided PDT seems to be safe and it is comparable to the bronchoscopy-guided PDT regarding the major and minor procedural-related or clinical complications. It also seems to reduce the minor complications when compared to the anatomical

Echoes on the motor network: how internal motor control structures afford sensory experience.

Science.gov (United States)

Burgess, Jed D; Lum, Jarrad A G; Hohwy, Jakob; Enticott, Peter G

2017-12-01

Often, during daily experiences, hearing peers' actions can activate motor regions of the CNS. This activation is termed auditory-motor resonance (AMR) and is thought to represent an internal simulation of one's motor memories. Currently, AMR is demonstrated at the neuronal level in the Macaque and songbird, in conjunction with evidence on a systems level in humans. Here, we review evidence of AMR development from a motor control perspective. In the context of internal modelling, we consider data that demonstrates sensory-guided motor learning and action maintenance, particularly the notion of sensory comparison seen during songbird vocalisation. We suggest that these comparisons generate accurate sensory-to-motor inverse mappings. Furthermore, given reports of mapping decay after songbird learning, we highlight the proposal that the maintenance of these sensorimotor maps potentially explains why frontoparietal regions are activated upon hearing known sounds (i.e., AMR). In addition, we also recommend that activation of these types of internal models outside of action execution may provide an ecological advantage when encountering known stimuli in ambiguous conditions.

GreyGuide. Poster presentation

OpenAIRE

Biagioni, Stefania; Farace, Dominic

2014-01-01

Welcome to the GreyGuide, a repository of good practices and resources in grey literature. The GreyGuide seeks to capture proposed as well as published practices dealing with the supply and demand sides of grey literature. This is a collaborative project involving GreyNet International and ISTI-CNR. The launch of the GreyGuide Repository took place in December 2013 at the Fifteenth International Conference on Grey Literature. Since then, the acquisition of both proposed and published good pra...

49 CFR 192.475 - Internal corrosion control: General.

Science.gov (United States)

2010-10-01

... 49 Transportation 3 2010-10-01 2010-10-01 false Internal corrosion control: General. 192.475... Control § 192.475 Internal corrosion control: General. (a) Corrosive gas may not be transported by... taken to minimize internal corrosion. (b) Whenever any pipe is removed from a pipeline for any reason...

International guide to the circus

NARCIS (Netherlands)

Huey, R.; Albrecht, E.; Belbahri, N.; Brunsdale, M.; Christian, J.; Garcia, J.; Giarola, A.; Jando, D.; Lehmann, R.; Marier, F.; Nieminen, K.; Parkinson, G.; Pierce, R.D.; Revolledo Cárdenas, J.; Rodenhuis, W.; Serena, A.; Schlotfeldt, A.; Shaina, C.; Shrake, P.; Simon, M.; St. Leon, M.; Stone, C.; Cooper, J.; Tamaoki, V.; Winkler, G.

2012-01-01

An easy-to-read publication defining 100 key circus terms translated in nine languages. The 24-page full color Guide (A4 size) is categorized by aerial acts, acrobatics, balancing, juggling, daredevil and specialty acts, clowning and performing animals. Terms are illustrated by photographs supplied

Radiological Control Technician: Phase 1, Site academic training study guides

International Nuclear Information System (INIS)

1992-10-01

This volume is a study guide for training Radiological Control Technicians. Provided herein are support materials for learning radiological documentation, communication systems, counting errors and statistics, dosimetry, contamination control, airborne sampling program methods, respiratory protection, radiological source control, environmental monitoring, access control and work area setup, radiological work coverage, shipment and receipt for radioactive material, radiological incidents and emergencies, personnel decontamination, first aid, radiation survey instrumentation, contamination monitoring, air sampling, and counting room equipment

Anaerobic Digestion. Instructor's Guide. Biological Treatment Process Control.

Science.gov (United States)

Carnegie, John W., Ed.

This instructor's guide contains materials needed to teach a four-lesson unit on anaerobic digestion control. These materials include: (1) unit overview; (2) lesson plans; (3) lecture outlines; (4) student worksheets for each lesson (with answers); and (5) two copies of a final quiz (with and without answers). Lesson 1 is a review of the theory of…

47 CFR 90.473 - Operation of internal transmitter control systems through licensed fixed control points.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Operation of internal transmitter control... Transmitter Control Internal Transmitter Control Systems § 90.473 Operation of internal transmitter control systems through licensed fixed control points. An internal transmitter control system may be operated...

Analyzing Crime and Crime Control: A Resource Guide. Economics-Political Science Series.

Science.gov (United States)

Butterfield, Ruth I.; And Others

This document, the fourth in a series of resource guides emphasizing economic-political analysis of contemporary public policies and issues, focuses on crime control. Designed as a three-week unit for secondary school students, the guide is presented in three sections. The introduction presents an economic and a political science framework for…

Know Your Rights on Campus: A Guide on Racial Profiling, and Hate Crime for International Students in the United States.

Science.gov (United States)

Harvard Civil Rights Project, Cambridge, MA.

This guide to the rights of international students explains racial profiling and hate crimes. Since the terrorist attacks of September 11, 2001, many immigrants and international students have experienced heightened scrutiny and outright discrimination. Racial profiling refers to the reliance by law enforcement officers on a person's ethnicity,…

A Design Method of Robust Servo Internal Model Control with Control Input Saturation

OpenAIRE

山田, 功; 舩見, 洋祐

2001-01-01

In the present paper, we examine a design method of robust servo Internal Model Control with control input saturation. First of all, we clarify the condition that Internal Model Control has robust servo characteristics for the system with control input saturation. From this consideration, we propose new design method of Internal Model Control with robust servo characteristics. A numerical example to illustrate the effectiveness of the proposed method is shown.

Regulatory Control of Radiation Sources. Safety Guide (Arabic Edition)

International Nuclear Information System (INIS)

2012-01-01

This Safety Guide is intended to assist States in implementing the requirements established in Safety Standards Series No. GS-R-1, Legal and Governmental Infrastructure for Nuclear, Radiation, Radioactive Waste and Transport Safety, for a national regulatory infrastructure to regulate any practice involving radiation sources in medicine, industry, research, agriculture and education. The Safety Guide provides advice on the legislative basis for establishing regulatory bodies, including the effective independence of the regulatory body. It also provides guidance on implementing the functions and activities of regulatory bodies: the development of regulations and guides on radiation safety; implementation of a system for notification and authorization; carrying out regulatory inspections; taking necessary enforcement actions; and investigating accidents and circumstances potentially giving rise to accidents. The various aspects relating to the regulatory control of consumer products are explained, including justification, optimization of exposure, safety assessment and authorization. Guidance is also provided on the organization and staffing of regulatory bodies. Contents: 1. Introduction; 2. Legal framework for a regulatory infrastructure; 3. Principal functions and activities of the regulatory body; 4. Regulatory control of the supply of consumer products; 5. Functions of the regulatory body shared with other governmental agencies; 6. Organization and staffing of the regulatory body; 7. Documentation of the functions and activities of the regulatory body; 8. Support services; 9. Quality management for the regulatory system.

Control room philosophy: Principles of control room design and control room work

International Nuclear Information System (INIS)

Skriver, Jan; Ramberg, Jasmine; Allwin, Pernilla

2006-01-01

In order to provide insights for improvement of work in control rooms several factors have to be considered. Knowledge of principles including control room philosophies will guide the recommended improvements. In addition to knowledge about specific principles an advantage for an organization can be an understanding of similarities and policies used in other high risk industry. The report has been developed on the basis of a document analysis of international standards and other guiding documents. (NUREG 0711, ISO 11064, ISO 6385, IEC 60964). In addition to the document analysis which has strived to compare the documents to see similarities in important principals, experience from working with control room design, modifications and evaluations in other high risk industries has pervaded the report. Important principles have been identified which are recommended to be included in a control room philosophy. Many of these are similar to the principles identified in the international standards. An additional principal which is regarded as important is the utilization of Key Performance Indicators (KPI) which can be used as a measure to target preventative means. Further more it is critical that the control room philosophy is easy to access and comprehend for all users. One of the challenges that remain after having developed a control room philosophy is how to utilize it in the daily work situation. It is vital that the document remains as a living document, guiding the continual improvement of the control room in the various life cycle stages

The International Coal Statistics Data Base program maintenance guide

International Nuclear Information System (INIS)

1991-06-01

The International Coal Statistics Data Base (ICSD) is a microcomputer-based system which contains information related to international coal trade. This includes coal production, consumption, imports and exports information. The ICSD is a secondary data base, meaning that information contained therein is derived entirely from other primary sources. It uses dBase III+ and Lotus 1-2-3 to locate, report and display data. The system is used for analysis in preparing the Annual Prospects for World Coal Trade (DOE/EIA-0363) publication. The ICSD system is menu driven and also permits the user who is familiar with dBase and Lotus operations to leave the menu structure to perform independent queries. Documentation for the ICSD consists of three manuals -- the User's Guide, the Operations Manual, and the Program Maintenance Manual. This Program Maintenance Manual provides the information necessary to maintain and update the ICSD system. Two major types of program maintenance documentation are presented in this manual. The first is the source code for the dBase III+ routines and related non-dBase programs used in operating the ICSD. The second is listings of the major component database field structures. A third important consideration for dBase programming, the structure of index files, is presented in the listing of source code for the index maintenance program. 1 fig

Humidity Control System In The Neutron Detector Of Guide Tube

International Nuclear Information System (INIS)

Alibasya Harahap, Sentot

2001-01-01

The probable symptom neutron detector damage as cause decrease resistivity and corrosion in the electrical terminal, further more occasion to voltage failure and leak current in the isolation. The prevent of voltage failure in detector a needed humidity controller's with dry air supply to guide tube with 2 kg/cm exp.2 air pressure and 7 l/min, air flow as soon as continuity dryer process in the guide tube. Reactor shutdown and operation condition of diffusion rate is 0,476 cm exp.3/year and 6,46 cm exp.3/year

International nuclear energy guide

International Nuclear Information System (INIS)

Anon.

1978-01-01

The aim of this French-English bilingual Guide is to present a synthesis embracing all the aspects and all the implications of the development of nuclear energy by situating it both within the French administrative and professional framework and in the world context. Special attention has been paid to the protection of man and the environment and to safety and security problems; most of the other questions -technological, economic, industrial- which arise at all points in the nuclear cycle. Teaching and research are outlined and a special appendix is devoted to nuclear information [fr

Ultrasound-Guided Versus Landmark-Guided Local Corticosteroid Injection for Carpal Tunnel Syndrome: A Systematic Review and Meta-Analysis of Randomized Controlled Trials.

Science.gov (United States)

Babaei-Ghazani, Arash; Roomizadeh, Peyman; Forogh, Bijan; Moeini-Taba, Seyed-Mohammad; Abedini, Amin; Kadkhodaie, Mona; Jahanjoo, Fateme; Eftekharsadat, Bina

2018-04-01

To review the literature and assess the comparative effectiveness of ultrasound-guided versus landmark-guided local corticosteroid injections in patients with carpal tunnel syndrome (CTS). Cochrane Central Register of Controlled Trials, MEDLINE (PubMed), Embase (Ovid), and Web of Science (from inception to February 1, 2017). Randomized controlled trials (RCTs) comparing ultrasound-guided injection with landmark-guided injection in patients with CTS were included. Two authors independently screened abstracts and full texts. The outcomes of interest were Symptom Severity Scale (SSS) and Functional Status Scale (FSS) scores of the Boston Carpal Tunnel Questionnaire and 4 electrodiagnostic parameters, including compound muscle action potential (CMAP), sensory nerve action potential (SNAP), distal motor latency (DML), and distal sensory latency (DSL). Overall, 569 abstracts were retrieved and checked for eligibility; finally, 3 RCTs were included (181 injected hands). Pooled analysis showed that ultrasound-guided injection was more effective in SSS improvement (mean difference [MD], -.46; 95% confidence interval [CI], -.59 to -.32; P.99), DML (MD, .05; 95% CI, -.30 to .39; P=.80), or DSL (MD, .00; 95% CI, -.65 to .65; P>.99). This review suggested that ultrasound-guided injection was more effective than landmark-guided injection in symptom severity improvement in patients with CTS; however, no significant differences were observed in functional status or electrodiagnostic improvements between the 2 methods. Copyright © 2017 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Internal Temperature Control For Vibration Testers

Science.gov (United States)

Dean, Richard J.

1996-01-01

Vibration test fixtures with internal thermal-transfer capabilities developed. Made of aluminum for rapid thermal transfer. Small size gives rapid response to changing temperatures, with better thermal control. Setup quicker and internal ducting facilitates access to parts being tested. In addition, internal flows smaller, so less energy consumed in maintaining desired temperature settings.

Guide to software export

CERN Document Server

Philips, Roger A

2014-01-01

An ideal reference source for CEOs, marketing and sales managers, sales consultants, and students of international marketing, Guide to Software Export provides a step-by-step approach to initiating or expanding international software sales. It teaches you how to examine critically your candidate product for exportability; how to find distributors, agents, and resellers abroad; how to identify the best distribution structure for export; and much, much more!Not content with providing just the guidelines for setting up, expanding, and managing your international sales channels, Guide to Software

Control of a self guided tracked vehicle for hazardous waste removal using GPS positioning and ultrasonic collision avoidance

International Nuclear Information System (INIS)

Roy, B.; Lokhorst, D.; Fung, P.; Rice, P.

1996-01-01

In 1994 a large hydraulic telerobotic tracked transport vehicle (TTV) was built for Lockheed Idaho Technologies by a team of companies consisting of RAHCO International of Spokane, Spar Aerospace of Toronto and RSI Research of Victoria. The TTV was developed as a part of the Department of Energy's Buried Waste Integrated Demonstration Program to transport low level transuranic waste in a safe, dust-free manner minimizing the potential spread of airborne contaminants. The TTV was controlled from a remote control station by an operator relying on video and sensor feedback. This paper describes the control system of SGTV, a self guided version of the TTV developed in 1995 to travel autonomously between loading and off-loading points while automatically avoiding obstacles in its path. Self-guidance is divided between a supervisory Mission Planning and Control computer (WC) and an on-board system of five networked computers

Novel needle guide reduces time to perform ultrasound-guided femoral nerve catheter placement: A randomised controlled trial.

Science.gov (United States)

Turan, Alparslan; Babazade, Rovnat; Elsharkawy, Hesham; Esa, Wael Ali Sakr; Maheshwari, Kamal; Farag, Ehab; Zimmerman, Nicole M; Soliman, Loran Mounir; Sessler, Daniel I

2017-03-01

Ultrasound-guided nerve blocks have become the standard when performing regional nerve blocks in anaesthesia. Infiniti Plus (CIVCO Medical Solutions, Kalona, Iowa, USA) is a needle guide that has been recently developed to help clinicians in performing ultrasound-guided nerve blocks. We tested the hypothesis that femoral nerve catheter placement carried out with the Infiniti Plus needle guide will be quicker to perform than without the Infiniti Plus. Secondary aims were to assess whether the Infiniti Plus needle guide decreased the number of block attempts and also whether it improved needle visibility. A randomised, controlled trial. Cleveland Clinic, Cleveland, Ohio, USA. We enrolled adult patients having elective total knee arthroplasty with a femoral nerve block and femoral nerve catheter. Patients, who were pregnant or those who had preexisting neuropathy involving the surgical limb, coagulopathy, infection at the block site or allergy to local anaesthetics were excluded. Patients were randomised into two groups to receive the ultrasound-guided femoral nerve catheter placement with or without the Infiniti Plus needle guide. The time taken to place the femoral nerve catheter, the number of attempts, the success rate and needle visibility were recorded. We used an overall α of 0.05 for both the primary and secondary analyses; the secondary analyses were Bonferroni corrected to control for multiple comparisons. The median (interquartile range Q1 to Q3) time to perform the femoral nerve catheter placement was 118 (100 to 150) s with Infiniti Plus and 177 (130 to 236) s without Infiniti Plus. Infiniti Plus significantly reduced the time spent performing femoral nerve catheterisation, with estimated ratio of means [(95% confidence interval), P value] of 0.67 [(0.60 to 0.75), P Infiniti Plus compared with no Infiniti Plus. However, Infiniti Plus had no effect on the odds of a successful femoral nerve catheter placement, number of attempts or percentage of perfect

A new adjustable parallel drill guide for internal fixation of femoral neck fracture: a developmental and experimental study.

Science.gov (United States)

Yuenyongviwat, Varah; Tuntarattanapong, Pakjai; Tangtrakulwanich, Boonsin

2016-01-11

Internal fixation is one treatment for femoral neck fracture. Some devices and techniques reported improved accuracy and decreased fluoroscopic time. However, these are not widely used nowadays due to the lack of available special instruments and techniques. To improve the surgical procedure, the authors designed a new adjustable drill guide and tested the efficacy of the device. The authors developed a new adjustable drill guide for cannulated screw guide wire insertion for multiple screw fixation. Eight orthopaedic surgeons performed the experimental study to evaluate the efficacy of this device. Each surgeon performed guide wire insertion for multiple screw fixation in six synthetic femurs: three times with the new device and three times with the conventional technique. The fluoroscopic time, operative time and surgeon satisfaction were evaluated. In the operations with the new adjustable drill guide, the fluoroscopic and operative times were significantly lower than the operations with the conventional technique (p level of satisfaction of this device was also statistically significantly better (p = 0.02) than the conventional technique. The fluoroscopic and operative times with the new adjustable drill guide were reduced for multiple screw fixation of femoral neck fracture and the satisfaction of the surgeons was good.

External Contamination Control of Attached Payloads on the International Space Station

Science.gov (United States)

Soares, Carlos E.; Mikatarian, Ronald R.; Olsen, Randy L.; Huang, Alvin Y.; Steagall, Courtney A.; Schmidl, William D.; Wright, Bruce D.; Koontz, Steven

2012-01-01

The International Space Station (ISS) is an on-orbit platform for science utilization in low Earth orbit with multiple sites for external payloads with exposure to the natural and induced environments. Contamination is one of the induced environments that can impact performance, mission success and science utilization on the vehicle. This paper describes the external contamination control requirements and integration process for externally mounted payloads on the ISS. The external contamination control requirements are summarized and a description of the integration and verification process is detailed to guide payload developers in the certification process of attached payloads on the vehicle. A description of the required data certification deliverables covers the characterization of contamination sources. Such characterization includes identification, usage and operational data for each class of contamination source. Classes of external contamination sources covered are vacuum exposed materials, sources of leakage, vacuum venting and thrusters. ISS system level analyses are conducted by the ISS Space Environments Team to certify compliance with external contamination control requirements. This paper also addresses the ISS induced contamination environment at attached payload sites, both at the requirements level as well as measurements made on ISS.

INFX GUIDE: DEPARTMENT OF ENERGY BILATERAL AGREEMENTS FOR COOPERATION IN THE FIELD OF RADIOACTIVE WASTE MANAGEMENT (INFX: INTERNATIONAL INFORMATION EXCHANGE)

Energy Technology Data Exchange (ETDEWEB)

Harman, K. M.; Lakey, L. T.; Leigh, I. W.; Jeffs, A. G.

1985-07-01

As the U. S. Department of Energy (DOE) and DOE contractors have increased the magnitude and scope of their cooperative activities with other nations in the nuclear fuel cycle and waste management field, a need has developed for ready sources of information concerning foreign waste management programs, DOE technology exchange policies, bilateral fuel cycle and waste management agreements and plans and activities to implement those agreements. The INFX (International InLormation E~change) Guide is one of a series of documents that have been prepared to provide that information. The INFX Guide has been compiled under the charter of PNL's International Support Office (IPSO) to maintain for DOE a center to collect, organize, evaluate and disseminate information on foreign and international radioactive waste management programs. Because the information in this document is constantly subject to change, the document is assembled in loose-leaf form to accommodate frequent updates.

Sequence-controlled polymerization guided by aryl-fluoroaryl π-stacking

KAUST Repository

Mugemana, Clement; Almahdali, Sarah; Rodionov, Valentin

2014-01-01

The ability to control monomer sequences is essential in macromolecular chemistry. Better sequence control leads to better control over macromolecular folding and self-assembly, which, in turn, would enable control over bulk properties (such as thermal behavior, conductivity and rigidity), as well as mimicking the properties of globular proteins. Here, we present a three-part synopsis of recent advances in research on sequence-controlled polymerization guided by aryl-perfluoroaryl π-π stacking of monomer pairs. We also show that for monomers that are capable of strong associative interactions, the classical reactivity ratio analysis based on Fineman-Ross/terminal reactivity models may lead to an imprecise determination of the monomer alternation mode. © 2014 American Chemical Society.

D-dimer to guide the intensity of anticoagulation in Chinese patients after mechanical heart valve replacement: a randomized controlled trial.

Science.gov (United States)

Zhang, L; Zheng, X; Long, Y; Wu, M; Chen, Y; Yang, J; Liu, Z; Zhang, Z

2017-10-01

Essentials Low anticoagulation intensity reduces bleeding but increases thrombosis during warfarin therapy. Elevated D-dimer level is associated with increased thrombosis events. D-dimer can be used to find potential thrombosis in those receiving low intensity therapy. D-dimer-guided therapy may be the optimal strategy for those with mechanical heart valve replacement. Background Controversies remain regarding the optimal anticoagulation intensity for Chinese patients after mechanical heart valve replacement despite guidelines having recommended a standard anticoagulation intensity. Objectives To investigate whether D-dimer could be used to determine the optimal anticoagulation intensity in Chinese patients after mechanical heart valve replacement. Patients/Methods This was a prospective, randomized controlled clinical study. A total of 748 patients following mechanical heart valve replacement in Wuhan Asia Heart Hospital were randomized to three groups at a ratio of 1 : 1 : 1. Patients in two control groups received warfarin therapy based on constant standard intensity (international normalized ratio [INR], 2.5-3.5; n = 250) and low intensity (INR, 1.8-2.6; n = 248), respectively. In the experimental group (n = 250), warfarin therapy was initiated at low intensity, then those with elevated D-dimer levels were adjusted to standard intensity. All patients were followed-up for 24 months until the occurrence of endpoints, including bleeding events, thrombotic events and all-cause mortality. Results A total of 718 patients were included in the analysis. Fifty-three events occurred during follow-up. There was less hemorrhage (3/240 vs. 16/241; hazard ratio [HR], 0.18; 95% confidence interval [CI], 0.07-0.45) and all-cause mortality (4/240 vs. 12/241; HR, 0.33; 95% CI, 0.12-0.87) observed in the D-dimer-guided group than in the standard-intensity group. A lower incidence of thrombotic events was also observed in the D-dimer-guided group when compared with the

Improvement of internal book-keeping control at company "Balttranslaine"

OpenAIRE

Kolodinska, Aļona

2012-01-01

Master's thesis "Internal Accounting Control Improvement in Ltd."Balttranslaine"" is designed to determine the potential and directions for improving accounting controls Ltd. "Balttranslaine". The paper assesses Ltd. "Balttranslaine" internal accounting control system and develops proposals for its improvement, based on research on accounting control nature and its place in the overall company's internal control system, as well as the Latvian laws and regulations for construction and maint...

12 CFR 1731.5 - Internal controls, procedures, and training.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Internal controls, procedures, and training... HOUSING AND URBAN DEVELOPMENT SAFETY AND SOUNDNESS MORTGAGE FRAUD REPORTING § 1731.5 Internal controls, procedures, and training. An Enterprise shall establish adequate and efficient internal controls and...

Investigating the effective factors on management internal controls applying

Directory of Open Access Journals (Sweden)

Ahmad Ahmadkhani

2012-08-01

Full Text Available Information technology plays an important role on increasing internal control in many organizations. In this paper, we present an empirical study to measure the impact of information technology, hiring high quality skilled management team, using high quality standards and increasing employees' awareness on managing internal control. The survey uses a questionnaire based on Likert scale and distributes among the people who work in either administration or financial sectors of governmental agencies in province of Zanjan, Iran. The results of the study indicate that the implementation of information technology positively influences management team to control their system, more effectively, using more skilled and specialized managers positively influences management internal control, an organization with suitable standard positively influences management internal control and increasing employees' awareness positively influences management internal control.

Design and control of automated guided vehicle systems: A case study

NARCIS (Netherlands)

Li, Q.; Adriaansen, A.C.; Udding, J.T.; Pogromski, A.Y.

2011-01-01

In this paper, we study the design and control of automated guided vehicle (AGV) systems, with the focus on the quayside container transport in an automated container terminal. We first set up an event-driven model for an AGV system in the zone control framework. Then a number of layouts of the road

INNOVATIVE ASPECTS OF DEVELOPMENT OF STATE INTERNAL FINANCIAL CONTROL AND INTERNAL FINANCIAL AUDIT

Directory of Open Access Journals (Sweden)

T. P. Voronchenko

2015-01-01

Full Text Available The article presents the innovative aspects of development of state internal fi nancial control and internal fi nancial audit in terms of the budgeting focused on result. A mechanism for implementing the functions of the Supervisory bodies in order to ensure the effi cient use of budgetary funds and eff ectiveness of budget expenditures. The main purpose of the article is justifi cation of implementing systems of internal fi nancial control and internal fi nancial audit in the structures of the major administrators and recipients of budgetary funds, with the allocation of the basic tools that ensure the functioning of the control mechanism, the combination of control procedures and sequence of their implementation. Methodological base of research is the generalization of domestic and foreign experience of internal fi nancial control and internal fi nancial audit, refl ecting an objective law and the necessity of development of state fi nancial control system in the conditions of innovative economy. The result of the implementation of the proposed mechanism and instruments for its implementation in key spending units and recipients of budget funds should be to ensure the eff ectiveness of the implementation of government programmes and projects. Signifi cance of the research contained in the article problems and their solutions is to ensure the effectiveness of the regulatory authorities at all stages of movement of budgetary funds and effective implementation of their Manager and recipient assigned to them socio-economic functions.

Control Techtronics International

Energy Technology Data Exchange (ETDEWEB)

West, J.

1995-12-31

Polish graded coal can be burned in existing stoker boilers and meet the 1998 Air Quality standard. This is accomplished with the Control Techtronics microprocessor-based combustion controller accurately and repeatedly: (a) matching the combustion air to the coal firing rate, with continuous stack sensor feedback; (b) continuously varying the boiler`s firing rate based on output water temperature or steam pressure; (c) continuously varying the exhaust fan`s speed to maintain minimum negative pressure in the boiler`s combustion chamber; and recirculating a portion of the flue gas, at varying amounts throughout the boiler`s firing rate. Systems for five boilers have been installed and are operating on MPEC`s Balicka plant in Krakow. Control Techtronics International has $10 million of U.S. Export-Import Bank funds available for similar projects throughout Poland.

Sediment traps with guiding channel and hybrid check dams improve controlled sediment retention

Science.gov (United States)

Schwindt, Sebastian; Franca, Mário J.; Reffo, Alessandro; Schleiss, Anton J.

2018-03-01

Sediment traps with partially open check dams are crucial elements for flood protection in alpine regions. The trapping of sediment is necessary when intense sediment transport occurs during floods that may endanger urban areas at downstream river reaches. In turn, the unwanted permanent trapping of sediment during small, non-hazardous floods can result in the ecological and morphological degradation of downstream reaches. This study experimentally analyses a novel concept for permeable sediment traps. For ensuring the sediment transfer up to small floods, a guiding channel implemented in the deposition area of a sediment trap was systematically studied. The bankfull discharge of the guiding channel corresponds to a dominant morphological discharge. At the downstream end of the guiding channel, a permeable barrier (check dam) triggers sediment retention and deposition. The permeable barrier consists of a bar screen for mechanical deposition control, superposed to a flow constriction for the hydraulic control. The barrier obstructs hazardous sediment transport for discharges that are higher than the bankfull discharge of the guiding channel without the risk of unwanted sediment flushing (massive self-cleaning).

3rd International Asia Conference on Informatics in Control, Automation and Robotics

CERN Document Server

Informatics in Control, Automation and Robotics

2012-01-01

Session 2 includes 110 papers selected from 2011 3rd International Asia Conference on Informatics in Control, Automation and Robotics (CAR 2011), held on December 24-25, 2011, Shenzhen, China.   As we all know, the ever growing technology in robotics and automation will help build a better human society. This session will provide a unique opportunity for the academic and industrial communities to address new challenges, share solutions, and discuss research directions for the future. Robotics research emphasizes intelligence and adaptability to cope with unstructured environments. Automation research emphasizes efficiency, productivity, quality, and reliability, focusing on systems that operate autonomously. The main focus of this session is on the autonomous acquisition of semantic information in intelligent robots and systems, as well as the use of semantic knowledge to guide further acquisition of information.

External Prior Guided Internal Prior Learning for Real-World Noisy Image Denoising

Science.gov (United States)

Xu, Jun; Zhang, Lei; Zhang, David

2018-06-01

Most of existing image denoising methods learn image priors from either external data or the noisy image itself to remove noise. However, priors learned from external data may not be adaptive to the image to be denoised, while priors learned from the given noisy image may not be accurate due to the interference of corrupted noise. Meanwhile, the noise in real-world noisy images is very complex, which is hard to be described by simple distributions such as Gaussian distribution, making real noisy image denoising a very challenging problem. We propose to exploit the information in both external data and the given noisy image, and develop an external prior guided internal prior learning method for real noisy image denoising. We first learn external priors from an independent set of clean natural images. With the aid of learned external priors, we then learn internal priors from the given noisy image to refine the prior model. The external and internal priors are formulated as a set of orthogonal dictionaries to efficiently reconstruct the desired image. Extensive experiments are performed on several real noisy image datasets. The proposed method demonstrates highly competitive denoising performance, outperforming state-of-the-art denoising methods including those designed for real noisy images.

Compliance assurance for the safe transport of radioactive material. Safety guide

International Nuclear Information System (INIS)

2009-01-01

The objectives of this Safety Guide are to assist competent authorities in the development and maintenance of compliance assurance programmes in connection with the transport of radioactive material, and to assist applicants, licensees and organizations in their interactions with competent authorities. In order to increase cooperation between competent authorities and to promote the uniform application of international regulations and recommendations, it is desirable to adopt a common approach to regulatory activities. This Safety Guide is intended to assist in accomplishing such a uniform application by recommending most of the actions for which competent authorities need to provide in their programmes for ensuring compliance with the Transport Regulations. This Safety Guide addresses radiation safety aspects of the transport of radioactive material; that is, the subjects that are covered by the Transport Regulations. Radioactive material may have other dangerous properties, however, such as explosiveness, flammability, pyrophoricity, chemical toxicity and corrosiveness; these properties are required to be taken into account in the regulatory control of the design and transport of packages. Physical protection and systems for accounting for and control of nuclear material are also discussed in this Safety Guide. These subjects are not within the scope of the Transport Regulations, but information on them is included here because they must be taken into account in the overall regulatory control of transport, especially when the regulatory framework is being established. Section 1 informs about the background, the objective, the scope and the structure of this publication. Section 2 provides recommendations on the responsibilities and functions of the competent authority. Section 3 provides information on the various national and international regulations and guides for the transport of radioactive material. Section 4 provides recommendations on carrying out

Instrumentation and control systems important to safety in nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2005-01-01

This Safety Guide was prepared under the IAEA programme for establishing safety standards for nuclear power plants. It supplements Safety Standards Series No. NS-R-1: Safety of Nuclear Power Plants: Design (the Requirements for Design), which establishes the design requirements for ensuring the safety of nuclear power plants. This Safety Guide describes how the requirements should be met for instrumentation and control (I and C) systems important to safety. This publication is a revision and combination of two previous Safety Guides: Safety Series Nos 50-SG-D3 and 50-SG-D8, which are superseded by this new Safety Guide. The revision takes account of developments in I and C systems important to safety since the earlier Safety Guides were published in 1980 and 1984, respectively. The objective of this Safety Guide is to provide guidance on the design of I and C systems important to safety in nuclear power plants, including all I and C components, from the sensors allocated to the mechanical systems to the actuated equipment, operator interfaces and auxiliary equipment. This Safety Guide deals mainly with design requirements for those I and C systems that are important to safety. It expands on paragraphs of Ref in the area of I and C systems important to safety. This publication is intended for use primarily by designers of nuclear power plants and also by owners and/or operators and regulators of nuclear power plants. This Safety Guide provides general guidance on I and C systems important to safety which is broadly applicable to many nuclear power plants. More detailed requirements and limitations for safe operation specific to a particular plant type should be established as part of the design process. The present guidance is focused on the design principles for systems important to safety that warrant particular attention, and should be applied to both the design of new I and C systems and the modernization of existing systems. Guidance is provided on how design

Government Internal Control System Maturity: The Role of Internal Guidance and External Control of Local Government in Indonesia

Directory of Open Access Journals (Sweden)

Sutaryo Sutaryo

2017-12-01

Full Text Available This study discusses the Government Internal Control System (SPIP. The purpose of this study is to obtain empirical evidence of influence of guidance, external control, and the characteristics of Local Governments on Internal Control (SPIP maturity of local governments in Indonesia. The samples used in this study are 188 local governments in 2014. The variables used include the dependent variable, i.e. the SPIP maturity of local government; Independent variables, i.e. guidance frequency, the number of internal control findings, total assets, total expenditure and the number of local government units. This study uses secondary data obtained from the Financial and Development Supervisory Agency (BPKP and the Supreme Audit Agency (BPK. This study uses multiple regression analysis and the results show that the guidace frequency and total expenditure have a positive influence on maturity of SPIP, SPI finding has a negative influence, and the total assets and the number of units do not have significant influence on the maturity of SPIP.

Internal control in the management system of meat processing enterprises

Directory of Open Access Journals (Sweden)

Volodymyr Kushnir

2018-03-01

Full Text Available The article is described the theoretical basis of internal control and its practical aspects in the work of meat processing enterprises (a case in the meat processing industry in Ukraine. The purpose of the research is to establish the theoretical foundations of the internal control and its improvement in the activity of meat processing plants of various forms of management. It is proposed to use precisely internal control among other names of domestic control. Definition of internal control, its subject and purpose are improved. The subjects and objects of internal control are determined; the principles of its implementation are supplemented. Specific control tasks in meat processing plants according to the needs of this industry are outlined. Specific examples of control subjects are presented and the role of the revision commission is emphasized. The state of internal control in meat processing plants in Ukraine is investigated and it is established that it has a bad condition and unfounded approach to its implementation by managers of meat processing enterprises. To improve the situation we recommend that each meat processing enterprise have in its staff a revision commission or an apposer (auditor. It is established that internal control is more effective in joint-stock companies than in limited liability companies. The necessity of internal control as an important element in the enterprise management system is accented.

Expanding Internal Control Functionality Scope

Directory of Open Access Journals (Sweden)

Mykola M. Vuitsiv

2012-08-01

Full Text Available The article reviews the influence of «western» concepts of the information needs of management process provisions on forming and developing the up-to-date model of Internal Control. An attempt has been made to develop the approach to solve urgent management tasks by applying the ideas of controlling and management accounting via the traditional national approach to the content of control. The place of control in the enterprise management information system has also been reviewed.

THEORETICAL ASPECTS OF INTERNAL FINANCIAL CONTROL

Directory of Open Access Journals (Sweden)

Dzhamilya F. Ismailova

2013-01-01

Full Text Available The article considers the theoretical aspects of internal financial control, summarizes the definition formulated by scientists and experts, analyzed for differences between incompany and intrafarm control. The article discusses the collapse of Enron, notes the general provisions of various types of financial control.

Windows® Internals

CERN Document Server

Russinovich, Mark E; Ionescu, Alex

2009-01-01

See how the core components of the Windows operating system work behind the scenes-guided by a team of internationally renowned internals experts. Fully updated for Windows Server 2008 and Windows Vista, this classic guide delivers key architectural insights on system design, debugging, performance, and support-along with hands-on experiments to experience Windows internal behavior firsthand.Delve inside Windows architecture and internals:Understand how the core system and management mechanisms work-from the object manager to services to the registryExplore internal system data structures usin

OPTICAL CONTROL OF THE INTERNAL CAVITIES OF CAST ARTICLES

Directory of Open Access Journals (Sweden)

E. I. Marukovich

2004-01-01

Full Text Available The methods and means of visual control of the hard-to-reach channels of castings and moulds on the basis of light-guiding systems of the optical pictures visualization are analyzed. The constructions and technical characteristics of hard and flexible endoscopes for control of basic profilecomposite parts are given.

Internal Control Good Cooperative Governance And Performance

Directory of Open Access Journals (Sweden)

Andry Arifian Rachman

2017-11-01

Full Text Available This study aims to examine the influence of internal control and good cooperative governance partially and simultaneously to the performance of cooperatives in West Java Province. The research method used in this research is descriptive and verification. The sample in this research is 22 boards as manager of cooperative in West Java Province. The data used in the research is the primary data through questionnaire collection. Validity and reliability testing is performed before hypothesis testing. This research uses multiple regression analysis technique. Based on hypothesis testing obtained 1 internal control has no significant effect on performance 2 good cooperative governance has a significant effect on performance and 3 internal control and good cooperative governance have a significant effect on performance.

13 CFR 107.506 - Safeguarding Licensee's assets/Internal controls.

Science.gov (United States)

2010-01-01

.../Internal controls. 107.506 Section 107.506 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION... Safeguarding Licensee's assets/Internal controls. You must adopt a plan to safeguard your assets and monitor... your control procedures. ...

Development of a Laser-Guided Deep-Hole Internal-Grinding Tool (Series 1) : Grinding Forces

OpenAIRE

Katsuki, Akio; Onikura, Hiromichi; Sajima, Takao; Park, Hyunkoo

2005-01-01

The laser-guided deep-hole internal grinding tool is developed to bore accurate and straight deep-holes with high surface quality. The tool consists of a grinding head, the front and rear actuators mounted on an actuator holder and a laser diode set in the back end of the holder. The grinding head consists of a diamond or CBN wheel, an air motor, and the piezoelectric actuators for the compensation of tool diameter. The grinding wheel is located eccentrically at the grinding head. The grindin...

Internal Border Controls in the European Union

DEFF Research Database (Denmark)

Jørgensen, Carsten Willemoes; Sørensen, Karsten Engsig

2012-01-01

Recent events, involving inter alia France and Denmark, have stimulated renewed interest in the introduction of different forms of border controls at the internal borders within the European Union. These border control measures are aimed at checking either persons or goods or both. Against...... the background of these events, this article analyses the existing rules regulating controls of persons and goods, and explores how these rules may or may not stand in the way of introducing border controls at the European Union’s internal borders. These events have resulted in a call for reforms of the current...

Budgeting-Based Organization of Internal Control

Science.gov (United States)

Rogulenko, Tatiana; Ponomareva, Svetlana; Bodiaco, Anna; Mironenko, Valentina; Zelenov, Vladimir

2016-01-01

The article suggests methodical approaches to the budgeting-based organization of internal control, determines the tasks and subtasks of control that consist in the construction of an efficient system for the making, implementation, control, and analysis of managerial decisions. The organization of responsibility centers by means of implementing…

AUTOMATION OF THE SYSTEM OF INTERNAL LABORATORY QUALITY CONTROL

Directory of Open Access Journals (Sweden)

V. Z. Stetsyuk

2015-05-01

Full Text Available Quality control system base d on the principles of standardi zation of all phases of laboratory testing and analysis of internal laboratory quality control and external quality assessment. For the detection accuracy of the results of laboratory tests, carried out internally between the laboratory and laboratory quality control. Under internal laboratory quality control we understand measurement results of each analysis in each anal ytical series rendered directly in the lab every day. The purpose of internal laboratory control - identifying and eliminating unacceptable deviations from standard perfor mance test in the laboratory, i.e. identifying and eliminating harmful analytical errors. The solutions to these problems by implementing automated systems - software that allows you to optimize analytical laboratory research stage of the procedure by automatically creating process control charts was shown.

Pengendalian Intern Terhadap Sistem Pengawasan Produksi Dan Sistem Biaya (Studi Kasus PT. XYZ

Directory of Open Access Journals (Sweden)

Julisar Julisar

2010-12-01

Full Text Available Business use internal control to guide their operations, safeguard assets and prevent abuses their system. Management is responsible for designing and applying five elements of internal control. The results from the evaluation of Internal Control in Production Control System and Cost System are the company has a good enough internal control in both their systems, such as, implement the segregation of duties, effective and efficiency in their manual operation procedure, controlling their documents and assets. But one thing the company needs to be done is the using of pre-numbered form. Most of all their forms have not been a pre-numbered form.

Effect of internal controls on credit risk among listed Spanish banks

Directory of Open Access Journals (Sweden)

Ellis Kofi Akwaa-Sekyi

2016-02-01

Full Text Available Purpose: The paper examines the effectiveness of internal control systems, explores the exposure of Spanish banks to the dangers of default as a result of internal control systems and establishes a relationship between internal controls and credit risk. Design/Methodology/Approach: Quantitative research approach is used to test hypotheses on the relationship between internal controls and credit risk among listed banks in Spain. Data from Bankscope and company websites from 2004-2013 were used. Generalized Least Squares (random effect econometric estimation technique was used for the model. Findings: We find that internal control systems are in place but their effectiveness cannot be guaranteed. This exposes Spanish listed banks to serious default situations. There is significant effect of internal controls on credit risk especially the control environment, risk management, control activities and monitoring. The non-disclosure of material internal control weakness is a contributory factor to the ineffective internal control systems. There is however a perceived board ineffectiveness which does not augur well for effective internal control systems. Board characteristics for Spanish banks confirm the agency theory. Research Limitations and Implications: Data unavailability for certain years, variables and many inactive banks did not permit a larger sample size than expected. The use of quantitative variables lacks flexibility. Practical Implications: Bank management will find the work useful to ensure strict enforcement of internal control mechanisms and see it as both credit risk and operational risk issues. Central bank should hurry to compel banks to disclose material internal control weakness as provided in the reviewed COSO framework. Social Implications: Ineffective internal controls lead to credit risks, bank closure and loss of investments. Society suffers a lot from such losses and contagion. Disclosure of material internal control

Cold War Arms Control Motivations and Techniques - A Guide for the Future?

National Research Council Canada - National Science Library

White, Elmer

1996-01-01

.... This paper provides a brief historical account of some of the arms control agreements between the U.S. and the Soviet Union, examines their major motivations to enter into negotiations, and illustrates some successful negotiation techniques. The author hypothesizes on the utility of this Cold War arms control experience as a useful guide for arms control in a single superpower world.

AUDITING INTERNAL CONTROLS IN FINANCING PRESCHOOL PUBLIC INSTITUTION: EVIDENCE FROM SLOVENIA

Directory of Open Access Journals (Sweden)

Tatjana HORVAT

2017-12-01

Full Text Available Public preschool educational institutions in Slovenia are mostly financed by public money, it means bay state and municipalities. They are also financed by parents. So, it is important that preschool institutions are using public money transparent and responsible, for this reason public preschool institution should have internal controls in financing. The internal auditor as independent professional should verify if internal controls works. The purpose of this paper is to investigate how internal controls in financing public educational institution works it means which internal controls are important in financing the preschool institution - on the selected institution to show and check how internal controls work. For this reason we divide internal controls in the financing in two phases: (1 internal controls in the preparation of the annual financial plan and financial planning of financial resources for institution’s programs and activities, (2 internal controls in obtaining financial resources. We used methods of internal auditing and research approaches as sampling, unstructured interviews and analysis of documents. The results showed that selected preschool institution should work on rules of recovery and monitoring of claims. The findings provide useful academic insight to setting internal controls as well as practical guidance for preschool institutions.

The Nuclotron internal target control and data acquisition system

Energy Technology Data Exchange (ETDEWEB)

Isupov, A.Yu., E-mail: isupov@moonhe.jinr.ru [Joint Institute for Nuclear Research, Dubna 141980 (Russian Federation); Krasnov, V.A.; Ladygin, V.P.; Piyadin, S.M.; Reznikov, S.G. [Joint Institute for Nuclear Research, Dubna 141980 (Russian Federation)

2013-01-11

The new control system of the Nuclotron (JINR, Dubna) internal target is described in both hardware and software aspects. The CAMAC hardware is based on the use of the standard CAMAC modules developed and manufactured at JINR. The internal target control and data acquisition (IntTarg CDAQ) system software is implemented using the ngdp framework under the Unix-like operating system (OS) FreeBSD to allow easy network distribution of the online data collected from internal target and accompanying detectors, as well as the internal target remote control.

Determinants of Effective Internal Control System in Nigerian Banks ...

African Journals Online (AJOL)

Determinants of Effective Internal Control System in Nigerian Banks. ... (21) chief internal auditors of selected recapitalized banks currently operating in Port Harcourt. ... can be carried out, high level ethical standards should be enshrined in Nigerian banks to make internal control more effective. ... HOW TO USE AJOL.

METHODOLOGICAL ASPECTS OF THE INTERNAL CONTROL SYSTEM FORMATION

Directory of Open Access Journals (Sweden)

Larisa I. Egorova

2014-01-01

Full Text Available The methodological aspects of the internal control system formation are stated in the article. The great attention is focused on the problems of financial statements misrepresentation. The basic principles and structure of the internal control system are discussed in this article.

Determinants of human resource investment in internal controls

Directory of Open Access Journals (Sweden)

Jong-Hag Choi

2013-09-01

Full Text Available Using the unique reporting environment in Korea, this study investigates the determinants of human resource investment in internal controls for 1352 listed firms disclosing the number of personnel who are in charge of internal control-related tasks (IC personnel from 2005 to 2008. We find that the number of IC personnel within a firm and several key departments increase with firm size, number of employees, complexity and for Chaebols, and decrease in rapidly growing firms. Additional analysis reveals that the factors influencing internal control systems have an accentuated effect on firms with relatively larger firm size.

Trancending the classrom: A practical guide to remote role plays in teaching international negotiation

DEFF Research Database (Denmark)

Smolinski, Remigiusz; Kesting, Peter

2012-01-01

This article discusses the pedagogical value of using remote role plays in cross-cultural negotiations between two classes taught simultaneously at different and geographically distant institutions. We argue that remote role-play simulations provide valuable teaching and learning experiences...... of some critical limitations of “traditional” in-class role plays, followed by a practical guide to remote role plays and a report of our experiences with them. Finally, we discuss the advantages and disadvantages of remote role plays as a teaching tool for international negotiation classes and the key...

Unsolved problems in applying U.S. regulatory guides to control system equipment

International Nuclear Information System (INIS)

Stade, R.E.

1978-01-01

Two current problems encountered when designing control systems to the United States Regulatory Guide requirements are discussed. They are: 1) Level of surge voltages that should be specified when procuring solid state control and instrumentation systems and equipment. 2) The approach to be used qualifying equipment that must meet the aging requirements. (author)

Control room philosophy: Principles of control room design and control room work; Kontrollrumsfilosofi: Principer foer kontrollrumsutformning och kontrollrumsarbete

Energy Technology Data Exchange (ETDEWEB)

Skriver, Jan; Ramberg, Jasmine; Allwin, Pernilla [Scandpower Risk Management AB, Uppsala (Sweden)

2006-01-15

In order to provide insights for improvement of work in control rooms several factors have to be considered. Knowledge of principles including control room philosophies will guide the recommended improvements. In addition to knowledge about specific principles an advantage for an organization can be an understanding of similarities and policies used in other high risk industry. The report has been developed on the basis of a document analysis of international standards and other guiding documents. (NUREG 0711, ISO 11064, ISO 6385, IEC 60964). In addition to the document analysis which has strived to compare the documents to see similarities in important principals, experience from working with control room design, modifications and evaluations in other high risk industries has pervaded the report. Important principles have been identified which are recommended to be included in a control room philosophy. Many of these are similar to the principles identified in the international standards. An additional principal which is regarded as important is the utilization of Key Performance Indicators (KPI) which can be used as a measure to target preventative means. Further more it is critical that the control room philosophy is easy to access and comprehend for all users. One of the challenges that remain after having developed a control room philosophy is how to utilize it in the daily work situation. It is vital that the document remains as a living document, guiding the continual improvement of the control room in the various life cycle stages.

Internal control as part of prevention irregularities in accounting of budgetary institution

Directory of Open Access Journals (Sweden)

O.М. Bunda

2016-07-01

Full Text Available The article researches the principles of internal control, the importance, the rationale for the essence of the system of internal control and the legislative building in budgetary institution. It describes the main challenges and problems of practical application of internal control in the normal course of business in modern enterprises. It reveals the following elements of the internal control of a budget institution as: control environment, risk assessment process of a budget institution, information systems, control procedures and control monitoring. The dependence between the effectiveness of accounting and internal control of a budget institution is determined. The paper highlights the methods of evaluation of internal control of a budget institution. This method is recommended for use in the preliminary assessment of control risk budget institution. The concept of «decision» as on the whole and also in particular in internal control is covered. The essential grouping indications of internal control decisions are defined and every type of decisions is characterized. The main directions of improvement of internal control to prevent violations in accounting of a budgetary institution is examined.

ENHANCING ASSETS' PROTECTION THROUGH AN ADEQUATE MONITORING OF INTERNAL CONTROL SYSTEM BY INTERNAL AUDIT

Directory of Open Access Journals (Sweden)

Dan Eugen Cosmin

2011-12-01

Full Text Available The assets are established into a company as very important and strategic resources that are contributing at the creation of the needed premises to conduct the daily-basis activity and also to reach present and future planned objectives. Recent studies like COSO's Fraudulent Financial Reporting 1998-2007 have highlighted an increasing fraudulent activity against assets therefore the efforts of fighting against fraud must be supplemented in order to preserve the existence and value of those resources. Internal controls are processes implemented in order to give a reasonable assurance that the company will not become a fraud victim. Even so, a lot of internal controls are paying a heavy tribute to their lack of efficiency and update. Thus, for a correct functioning, internal controls must be monitored and assessed permanently in order to preserve their strength and ability to fulfill their mission. This approach will deliver more added value because rather than being corrected after they have already occurred, the frauds related with the assets will be prevented, detected and reported at a timely moment, thereby the incidence and value of those criminal activities will decrease significantly. Furthermore, because not only the process of monitoring is important but even the entity conducting this activity we believe that internal audit is the most appropriate to undertake this responsibility. Thus, through this material we opened a discussion about how important permanent monitored and updated internal controls are in order to assure a proper assets protection and why internal audit, rather than the management, should be the most eligible to undertake this responsibility. Also we provided some suggestions regarding the main activities that must be taken into consideration by an internal audit professional when is being involved in a monitoring process of internal control system. We do believe that this paper will be the starting point for new

Quieting: A Practical Guide to Noise Control. NBS Handbook 119.

Science.gov (United States)

Berendt, Raymond D.; And Others

This guide describes the ways in which sounds are generated, travel, and affect the listener's hearing and well-being. Recommendations are given for controlling noise at the source and along its path of travel, and for protecting the listener. Remedies are given for noise commonly encountered in homes, work environments, schools, while traveling,…

The Environmental Action Internal Control Index.

Science.gov (United States)

Smith-Sebasto, N. J.; Fortner, Rosanne W.

1994-01-01

Reports research designed to develop a reliable and valid instrument to assess the relationship between locus of control of reinforcement and environmentally responsible behavior in (n=853) undergraduate students. Results suggest that the Environmental Action Internal Control Index can accurately predict environmentally responsible behavior.…

Guide: Monitoring Programme for unannounced inspections undertaken against the National Standards for the Prevention and Control of Healthcare Associated Infections

OpenAIRE

2014-01-01

This is a guide to the Health Information and Quality Authority?s (the Authority) programme of monitoring service providers? compliance with the National Standards for the Prevention and Control of Healthcare Associated Infections (referred to in this guide as the Infection, Prevention and Control Standards). This guide explains the approach that the Authority takes when monitoring the compliance of service providers ? including hospitals ? with the Infection, Prevention and Control Standards...

Meta-Strategies of the Internal Control Development within the Organization

OpenAIRE

Roman Voronko

2015-01-01

The article considers the problem of the influence of external and internal environment of the organization on the structure of the internal control system. A critical analysis is made on existing scientific researches and practice of setting internal control within the organizations. Determined the cause-and-effect relationship between the stages of development of the industry and business, on the one hand, and the development of the internal control structure on the other hand. It made it p...

Influence of structure improvement of guide tubes and bundles in pressurized water reactor (PWR) on drop of control rods

International Nuclear Information System (INIS)

Shen Xiuzhong; Yu Pingan; Yang Guanyue

1996-01-01

In order to alleviate the cross hydraulic load on control rod guide tubes and bundles, some protective sleeves are added to those near the upper plenum outlet nozzles (4 symmetric bundles: 02-26, 03-25, 11-29, 12-28). In a 1/4 scale transparent model of the PWR upper plenum of Qinshan Nuclear Power Station, water was chosen as the fluid and hydraulic experiments with improved control rod guide tubes and bundles were carried out. The results were carefully compared with those of the experiments with unimproved control rod guide tubes and bundles. It is concluded that adding protective sleeves to the control rod guide tubes and bundles near the outlet nozzles will help to lighten the hydraulic load on them and make certain of the free movement and rapid dropping of control rods in the tubes and bundles in emergency by order

Internal quality control in serological tests for syphilis.

OpenAIRE

Wasley, G D

1985-01-01

The importance of syphilis serological tests demands that laboratory reports are reliable. Internal quality control applied to the organisation of a syphilis serology service improves laboratory bench performance and reporting. Described here are internal quality control procedures of a department that serves a genitourinary medicine clinic and conducts 70 000 tests a year to investigate for syphilis.

INTERNAL CONTROLS IN ENSURING GOOD CORPORATE GOVERNANCE IN FINANCIAL INSTITUTIONS

Directory of Open Access Journals (Sweden)

KOSMAS NJANIKE

2011-01-01

Full Text Available This paper assessed factors that influence the internal controls in ensuring good corporate governance in financial institutions in developing economies with special reference to Zimbabwe. The research paper assessed how lack of internal controls affected good corporate governance and aimed to bring out elements of good corporate governance. It emerged that failure to effectively implement internal controls contributed significantly to poor corporate governance. The study discovered that internal control system overrides and the issue of “fact cat” directors also contributed to poor corporate governance. The study recommended that there is need for the board of directors to guarantee an organizational structure that clearly defines management responsibilities, authority and reporting relationships. There is also need to ensure that delegated responsibilities are effectively carried out to ensure compliance with internal controls of the financial institution concerned.

47 CFR 90.471 - Points of operation in internal transmitter control systems.

Science.gov (United States)

2010-10-01

...) SAFETY AND SPECIAL RADIO SERVICES PRIVATE LAND MOBILE RADIO SERVICES Transmitter Control Internal Transmitter Control Systems § 90.471 Points of operation in internal transmitter control systems. The... licensee for internal communications and transmitter control purposes. Operating positions in internal...

Thermonuclear controlled fusion: international cooperation

International Nuclear Information System (INIS)

Conscience, J.-F.

2001-01-01

This report summarizes the current worldwide status of research in the field of thermonuclear controlled fusion as well as the international research programme planed for the next decades. The two main projects will be the ITER facility (International Thermonuclear Experimental Reactor) that should produce 10 times more energy than the energy injected, and the IFMIF (International Fusion Materials Irradiation Facility) designed to study the reactions of materials under intense neutron fluxes. The future of the pioneering JET facility (Joint European Torus) is also discussed. The engagement of the various countries (USA, Japan, Germany, Russian Federation and Canada) and international organisations (EURATOM and IEA) in terms of investment and research is described. Switzerland is involved in this program through an agreement with EURATOM and is mainly dedicated to experimental studies with the TCV machine in Lausanne and numerical studies of plasma configurations. It will participate to the development of the microwave plasma heating system for the ITER machine

Remote-controlled vision-guided mobile robot system

Science.gov (United States)

Ande, Raymond; Samu, Tayib; Hall, Ernest L.

1997-09-01

Automated guided vehicles (AGVs) have many potential applications in manufacturing, medicine, space and defense. The purpose of this paper is to describe exploratory research on the design of the remote controlled emergency stop and vision systems for an autonomous mobile robot. The remote control provides human supervision and emergency stop capabilities for the autonomous vehicle. The vision guidance provides automatic operation. A mobile robot test-bed has been constructed using a golf cart base. The mobile robot (Bearcat) was built for the Association for Unmanned Vehicle Systems (AUVS) 1997 competition. The mobile robot has full speed control with guidance provided by a vision system and an obstacle avoidance system using ultrasonic sensors systems. Vision guidance is accomplished using two CCD cameras with zoom lenses. The vision data is processed by a high speed tracking device, communicating with the computer the X, Y coordinates of blobs along the lane markers. The system also has three emergency stop switches and a remote controlled emergency stop switch that can disable the traction motor and set the brake. Testing of these systems has been done in the lab as well as on an outside test track with positive results that show that at five mph the vehicle can follow a line and at the same time avoid obstacles.

Design of Instrumentation and Control Systems for Nuclear Power Plants. Specific Safety Guide

International Nuclear Information System (INIS)

2016-01-01

This publication is a revision and combination of two Safety Guides, IAEA Safety Standards Series No. NS-G-1.1 and No. NS-G-1.3. The revision takes into account developments in instrumentation and control (I&C) systems since the publication of the earlier Safety Guides. The main changes relate to the continuing development of computer applications and the evolution of the methods necessary for their safe, secure and practical use. In addition, account is taken of developments in human factors engineering and the need for computer security. This Safety Guide references and takes into account other IAEA Safety Standards and Nuclear Security Series publications that provide guidance relating to I&C design

Guide tube insert assembly for use in a nuclear reactor

International Nuclear Information System (INIS)

Hopkins, R.J.; Land, J.T.

1992-01-01

This patent describes an internals assembly for a nuclear reactor of the type including an upper support plate and an upper core plate, each having apertures for conducting control rod assemblies into an out of fuel assemblies with the apertures of the upper support plate being aligned with the apertures of the upper core plate, a guide tube insert assembly comprising: an elongated tubular body extending between at least one of the aligned apertures formed in the upper support plate and the upper core plate; guide plates within the elongated tubular body, each of the guide plates having a planar surface extending substantially perpendicular to an axial direction of the tubular body; at least one interconnecting means for interconnecting the guide plates into a guide tube insert assembly such that the guide plates are simultaneously mountable within and removable from the elongated body, and the periphery of each of the guide plates is spaced apart from the inner walls of the elongated tubular body at every point when the insert assembly is mounted within the tubular body, and a stabilizing means for securing the lowermost guide plate of the guide tube insert assembly within the elongated tubular body to prevent rotational and lateral movement between the guide tube insert assembly and the tubular body

Effect of internal controls on credit risk among listed Spanish banks

OpenAIRE

Akwaa-Sekyi, Ellis Kofi; Moreno Gené, Jordi

2016-01-01

Purpose: The paper examines the effectiveness of internal control systems, explores the exposure of Spanish banks to the dangers of default as a result of internal control systems and establishes a relationship between internal controls and credit risk. Design/Methodology/Approach: Quantitative research approach is used to test hypotheses on the relationship between internal controls and credit risk among listed banks in Spain. Data from Bankscope and company websites from 2004-2013 were used...

7 CFR 4290.506 - Safeguarding the RBIC's assets/Internal controls.

Science.gov (United States)

2010-01-01

... 7 Agriculture 15 2010-01-01 2010-01-01 false Safeguarding the RBIC's assets/Internal controls... Safeguarding the RBIC's assets/Internal controls. You must adopt a plan to safeguard your assets and monitor... your control procedures. ...

International Telecommunication Control: International Law and the Ordering of Satellite and Other Forms of International Broadcasting.

Science.gov (United States)

Smith, Delbert D.

The need for and the available alternatives for international telecommunication controls are examined, and a functional approach to this area of law is offered. Information from a number of areas is collected and examined as it relates to the basic problem. These areas include general principles of international law, the activities of the…

Internal transport control in pot plant production

NARCIS (Netherlands)

Annevelink, E.

1999-01-01

Drawing up internal transport schedules in pot plant production is a very complex task. Scheduling internal transport at the operational level and providing control on a day-to-day or even hour-to-hour basis in particular requires a new approach. A hierarchical planning approach based on

77 FR 43196 - Minimum Internal Control Standards and Technical Standards

Science.gov (United States)

2012-07-24

... NATIONAL INDIAN GAMING COMMISSION 25 CFR Parts 543 and 547 Minimum Internal Control Standards [email protected] . SUPPLEMENTARY INFORMATION: Part 543 addresses minimum internal control standards (MICS) for Class II gaming operations. The regulations require tribes to establish controls and implement...

Have the auditors closed the expectation gap concerning evaluation of internal control?

DEFF Research Database (Denmark)

Birkholm, Peter; Holm, Claus

internal controls intended for management directors, it provides a framework which explicitly deals with the interests of all parties involved (including auditors, board of directors and regulating bodies). The auditors took this into account by updating the particular auditing standard on internal control....... Realized discrepancies are identified and related to the necessary features of an integrated framework. The necessary features include (1) the definition of internal controls, (2) the components of internal control, (3) the criteria for evaluating internal control as stated by the auditors (4) the criteria...... for evaluating internal controls as stated by management, and (5) the integration of internal control evaluations from management and auditors. The paper provides evidence from an in-depth contents analysis comparing SAS No. 55 from 1988 with the COSO-report from 1992 and SAS No. 78 from 1995. The analysis...

Disarmament and control of nuclear weapons: Russian positions and their national and international determining factors

International Nuclear Information System (INIS)

Facon, Isabelle

2009-01-01

In a context where Russia seems to come back to some key principles which guided its international action since the end of Cold War, and relationships between Russia and the USA have been degraded since the US intervention in Iraq (2003), the author examines whether these new Russian postures also concern strategic disarmament, whether Russia is loosing its interest in traditional arrangements of strategic stability, and what are Moscow's priorities within the perspective of expiry of the START 1 Treaty. Thus, the author discusses the role of nuclear weapons in the Russian defence policy, outlines the paradoxes of Russian negotiation positions in the fields of disarmament and arms control, and highlights indirect approaches adopted by Russia on these issues

Internal quality control of PCR-based genotyping methods

DEFF Research Database (Denmark)

Bladbjerg, Else-Marie; Gram, Jørgen; Jespersen, Jørgen

2002-01-01

Internal quality control programmes for genetic analyses are needed. We have focused on quality control aspects of selected polymorphism analyses used in thrombosis research. DNA was isolated from EDTA-blood (n = 500) and analysed for 18 polymorphisms by polymerase chain reaction (PCR), i...... because of positive reagent blanks (controls (Control of data handling revealed 0.1% reading mistakes and 0.5% entry mistakes. Based on our experiences, we propose an internal quality control programme......, electrophoresis (analytical factors), result reading and entry into a database (post-analytical factors). Furthermore, we evaluated a procedure for result confirmation. Isolated DNA was of good quality (42 micrograms/ml blood, A260/A280 ratio > 1.75, negative DNAsis tests). Occasionally, results were reanalysed...

Nuclear materials control and accountability internal audit program

International Nuclear Information System (INIS)

Barham, M.A.; Abbott, R.R.

1991-01-01

This paper reports that the Department of Energy Order (DOE) 5633.3, Control and Accountability for Nuclear Materials, includes several requirements for development and implementation of an internal audit program. Martin Marietta Energy System, Inc., manages five sites in Tennessee, Kentucky, and Ohio for the DOE Field Office, Oak Ridge and has a Central Nuclear Materials Control and Accountability (NMC and A) Manager with matrixed responsibility for the NMC and A program at the five sites. The Energy Systems Central NMC and A Manager has developed an NMC and A Internal Audit Handbook which defines the functional responsibilities, performance criteria, and reporting and documentation requirements for the Energy Systems NMC and A Internal Audit Program. The initial work to develop and implement these standards was tested at the K-25 Site when the site hired an internal auditor to meet the DOE requirements for an NMC and A Internal Audit program

Pengaruh Proporsi Komisaris Independen dan Komposisi Komite Audit terhadap Internal Control

Directory of Open Access Journals (Sweden)

Makhdalena Makhdalena

2015-12-01

Full Text Available Accounting manipulation that occurred in recent years makes accounting experts to focus on internal control issues. The experts agree that internal control is an important issue through a substance that can be given by the internal control. Internal control can be effective if supported by the proportion of independent commissioners and audit committee composition are adequate. Based on that idea, the researchers interested in conducting research that aims to find out: the influence of the proportion of independent commissioners and audit committee composition of the internal control eithersimultaneously or partially. Research conducted by the survey in 48 listed companies in Jakarta Stock Exchange manufacturing drawn at random from the population. Data used in this study are primary data from the questionnaire and secondary data from the annual report. Data were analyzed using path analysis. The results showed that: the proportion of independent commissioners and audit committee composition has a significant influence on the internal control eithersimultaneously or partially.

Active and passive beam application design guide for global application

CERN Document Server

Rimmer, Julian

2015-01-01

The Active and Passive Beam Application Design Guide is the result of collaboration by worldwide experts to give system designers a current, authoritative guide on successfully applying active and passive beam technology. Active and Passive Beam Application Design Guide provide energy-efficient methods of cooling, heating, and ventilating indoor areas, especially spaces that require individual zone control and where internal moisture loads are moderate. The systems are simple to operate, with low maintenance requirements. This book is an essential resource for consulting engineers, architects, owners, and contractors who are involved in the design, operation, and installation of these systems. Building on REHVA’s Chilled Beam Application Guidebook, this new guide provides up-to-date tools and advice for designing, commissioning, and operating chilled-beam systems to achieve a determined indoor climate, and includes examples of active and passive beam calculations and selections. Dual units (SI and I-P) are...

Complications in CT-guided Procedures: Do We Really Need Postinterventional CT Control Scans?

Energy Technology Data Exchange (ETDEWEB)

Nattenmüller, Johanna, E-mail: johanna.nattenmueller@med.uni-heidelberg.de; Filsinger, Matthias, E-mail: Matthias_filsinger@web.de; Bryant, Mark, E-mail: mark.bryant@med.uni-heidelberg.de; Stiller, Wolfram, E-mail: Wolfram.Stiller@med.uni-heidelberg.de; Radeleff, Boris, E-mail: boris.radeleff@med.uni-heidelberg.de; Grenacher, Lars, E-mail: lars.grenacher@med.uni-heidelberg.de; Kauczor, Hans-Ullrich, E-mail: hu.kauczor@med.uni-heidelberg.de; Hosch, Waldemar, E-mail: waldemar.hosch@urz.uni-heidelberg.de [University Hospital Heidelberg, Department of Diagnostic and Interventional Radiology (Germany)

2013-06-19

PurposeThe aim of this study is twofold: to determine the complication rate in computed tomography (CT)-guided biopsies and drainages, and to evaluate the value of postinterventional CT control scans.MethodsRetrospective analysis of 1,067 CT-guided diagnostic biopsies (n = 476) and therapeutic drainages (n = 591) in thoracic (n = 37), abdominal (n = 866), and musculoskeletal (ms) (n = 164) locations. Severity of any complication was categorized as minor or major. To assess the need for postinterventional CT control scans, it was determined whether complications were detected clinically, on peri-procedural scans or on postinterventional scans only.ResultsThe complication rate was 2.5 % in all procedures (n = 27), 4.4 % in diagnostic punctures, and 1.0 % in drainages; 13.5 % in thoracic, 2.0 % in abdominal, and 3.0 % in musculoskeletal procedures. There was only 1 major complication (0.1 %). Pneumothorax (n = 14) was most frequent, followed by bleeding (n = 9), paresthesia (n = 2), material damage (n = 1), and bone fissure (n = 1). Postinterventional control acquisitions were performed in 65.7 % (701 of 1,067). Six complications were solely detectable in postinterventional control acquisitions (3 retroperitoneal bleeds, 3 pneumothoraces); all other complications were clinically detectable (n = 4) and/or visible in peri-interventional controls (n = 21).ConclusionComplications in CT-guided interventions are rare. Of these, thoracic interventions had the highest rate, while pneumothoraces and bleeding were most frequent. Most complications can be detected clinically or peri-interventionally. To reduce the radiation dose, postinterventional CT controls should not be performed routinely and should be restricted to complicated or retroperitoneal interventions only.

Complications in CT-guided Procedures: Do We Really Need Postinterventional CT Control Scans?

International Nuclear Information System (INIS)

Nattenmüller, Johanna; Filsinger, Matthias; Bryant, Mark; Stiller, Wolfram; Radeleff, Boris; Grenacher, Lars; Kauczor, Hans-Ullrich; Hosch, Waldemar

2014-01-01

PurposeThe aim of this study is twofold: to determine the complication rate in computed tomography (CT)-guided biopsies and drainages, and to evaluate the value of postinterventional CT control scans.MethodsRetrospective analysis of 1,067 CT-guided diagnostic biopsies (n = 476) and therapeutic drainages (n = 591) in thoracic (n = 37), abdominal (n = 866), and musculoskeletal (ms) (n = 164) locations. Severity of any complication was categorized as minor or major. To assess the need for postinterventional CT control scans, it was determined whether complications were detected clinically, on peri-procedural scans or on postinterventional scans only.ResultsThe complication rate was 2.5 % in all procedures (n = 27), 4.4 % in diagnostic punctures, and 1.0 % in drainages; 13.5 % in thoracic, 2.0 % in abdominal, and 3.0 % in musculoskeletal procedures. There was only 1 major complication (0.1 %). Pneumothorax (n = 14) was most frequent, followed by bleeding (n = 9), paresthesia (n = 2), material damage (n = 1), and bone fissure (n = 1). Postinterventional control acquisitions were performed in 65.7 % (701 of 1,067). Six complications were solely detectable in postinterventional control acquisitions (3 retroperitoneal bleeds, 3 pneumothoraces); all other complications were clinically detectable (n = 4) and/or visible in peri-interventional controls (n = 21).ConclusionComplications in CT-guided interventions are rare. Of these, thoracic interventions had the highest rate, while pneumothoraces and bleeding were most frequent. Most complications can be detected clinically or peri-interventionally. To reduce the radiation dose, postinterventional CT controls should not be performed routinely and should be restricted to complicated or retroperitoneal interventions only

Partial Internal Control Recovery on 1-D Klein-Gordon Systems

Directory of Open Access Journals (Sweden)

Iwan Pranoto

2010-03-01

Full Text Available In this exposition, a technique to recover internal control on a distributed parameter system is reported. The system is described by 1-D Klein-Gordon partial differential equation with a time-varying parameter. We would like to recover the internal control applied to the system if we know some limited information about the output. We use a method called sentinel method to recover the internal control. It involves some construction of a linear functional, and we show that this construction relates closely to the exact controllability problem.

Internal control activities in small Turkish companies

Directory of Open Access Journals (Sweden)

Ismail Bilgi

2017-01-01

Full Text Available The purpose of this paper is to present major outcomes from an empirical study concerning internal control activities in small Turkish companies, as to propose the improvement guidelines. Methods of analysis and synthesis, descriptive statistics, and statistical comparison were used. The collected data was processed with the help of the SPSS software. Тhe study is limited to organizations based in the European part of Turkey. Most of them operate in areas around large cities, such as Istanbul, Edirne, Kırklareli, and Tekirdağ. They employ on average 19-20 people and have a turnover of about TRY 3 million (≈€715,000, https://sdw.ecb.europa.eu on average. The survey concentrates mainly on small family businesses, which have been present on the market for more than ten years, with managers of good education and other characteristics that presuppose availability of internal control systems. The research results were used to compile main points of a SWOT analysis, as a part of the broader effort to help modernizing the internal control system in Turkish small businesses.

Apply Pesticides Correctly, A Guide for Commercial Applicators: Agricultural Pest Control -- Animal.

Science.gov (United States)

Wamsley, Mary Ann, Ed.; Vermeire, Donna M., Ed.

This guide contains basic information to meet specific standards for pesticide applicators. The text is concerned with the common pests of agricultural animals such as flies, ticks, bots, lice and mites. Methods for controlling these pests and appropriate pesticides are discussed. (CS)

Upper internals of PWR with coolant flow separator

International Nuclear Information System (INIS)

Chevereau, G.; Heuze, A.

1989-01-01

The upper internals for a PWR has a collecting volume for the coolant merging from the core and an apparatus for separating the flow of coolant. This apparatus has a guide for the control rods, a lower plate perforated to allow the coolant through from the core, an upper plate also perforated to allow the coolant through to the collecting volume and a peripheral binding ring joining the two plates. Each guide comprises an envelope without holes and joined perceptibly tight to the plates [fr

SOME CONSIDERATIONS OVER THE INTERNAL CONTROL IN THE CONTEXT OF CURRENT ACCOUNTANCY REGULATIONS

Directory of Open Access Journals (Sweden)

Lenghel Dorin Radu

2012-12-01

Full Text Available Through the hereby study we set ourselves on an analysis over the internal control and the ways of implementation of it. The final purpose of our research is represented by the characteristics of the internal control system in the context of current accountancy regulations. The accomplishment of such goal has forced us to research the current literature in the area and also the legal regulations over internal control. Of course, the accomplishment of such a research was possible only after a pertinent analysis over the opinions expressed in specialty literature regarding this area. Our research wants to be with a theoretical and applicative character. It is based on analysing the internal control system, the methodology of internal control and the steps of internal control. We express our belief that the implementation of the internal control in a very exact manner comes as an aid to the company management and lead to the accomplishment of managerial objectives and policies. In what it regards the result of our research there can be drawn the following conclusions: from the legal regulations (OMFP nr. 3055/2009, there is no clear conclusion over the procedures and policies of implementation of internal control applicable to an economical entity; also there are not presented in a detailed way the types (forms of internal control, being presented in the legal regulations only a classification of them after the time in which they are exercised (before, during or after the finishing of the operations; also in the legal regulations there is developed a certain way of internal control, represented by the financial and accounting internal control, as if the other forms of internal control do not exist; in what regards the components of internal control, these are presented in another way, but similar to already known models of internal control (Coso and Coco; also in the legal regulations there are presented the general objectives of internal control

Model tracking dual stochastic controller design under irregular internal noises

International Nuclear Information System (INIS)

Lee, Jong Bok; Heo, Hoon; Cho, Yun Hyun; Ji, Tae Young

2006-01-01

Although many methods about the control of irregular external noise have been introduced and implemented, it is still necessary to design a controller that will be more effective and efficient methods to exclude for various noises. Accumulation of errors due to model tracking, internal noises (thermal noise, shot noise and l/f noise) that come from elements such as resistor, diode and transistor etc. in the circuit system and numerical errors due to digital process often destabilize the system and reduce the system performance. New stochastic controller is adopted to remove those noises using conventional controller simultaneously. Design method of a model tracking dual controller is proposed to improve the stability of system while removing external and internal noises. In the study, design process of the model tracking dual stochastic controller is introduced that improves system performance and guarantees robustness under irregular internal noises which can be created internally. The model tracking dual stochastic controller utilizing F-P-K stochastic control technique developed earlier is implemented to reveal its performance via simulation

GuideLiner™ as guide catheter extension for the unreachable mammary bypass graft.

Science.gov (United States)

Vishnevsky, Alec; Savage, Michael P; Fischman, David L

2018-03-09

Percutaneous coronary intervention (PCI) of mammary artery bypass grafts through a trans-radial (TR) approach can present unique challenges, including coaxial vessel engagement of the guiding catheter, adequate visualization of the target lesion, sufficient backup support for equipment delivery, and the ability to reach very distal lesions. The GuideLiner catheter, a rapid exchange monorail mother-in-daughter system, facilitates successful interventions in such challenging anatomy. We present a case of a patient undergoing PCI of a right internal mammary artery (RIMA) graft via TR access in whom the graft could not be engaged with any guiding catheter. Using a balloon tracking technique over a guidewire, a GuideLiner was placed as an extension of the guiding catheter and facilitated TR-PCI by overcoming technical challenges associated with difficult anatomy. © 2018 Wiley Periodicals, Inc.

Internal control as part of prevention irregularities in accounting of budgetary institution

OpenAIRE

O.М. Bunda; E.М. Guzenko

2016-01-01

The article researches the principles of internal control, the importance, the rationale for the essence of the system of internal control and the legislative building in budgetary institution. It describes the main challenges and problems of practical application of internal control in the normal course of business in modern enterprises. It reveals the following elements of the internal control of a budget institution as: control environment, risk assessment process of a budget institu...

Specificity of continuous auditing approach on information technology internal controls

Directory of Open Access Journals (Sweden)

Kaćanski Slobodan

2012-01-01

Full Text Available Contemporary business world, can not be imagined without the use of information technology in all aspects of business. The use of information technology in manufacturing and non-production companies' activities can greatly facilitate and accelerate the process of operation and control. Because of its complexity, they possess vulnerable areas and provide space for the emergence of accidental and intentional frauds that can significantly materially affect the business decisions made by the companies' management. Implementation of internal controls can greatly reduce the level of errors that can contribute to making the wrong decisions. In order to protect the operating system, the company's management implement an internal audit to periodically examine the fundamental quality of the internal control systems. Since the internal audit, according to its character, only periodically checks quality of internal control systems and information technologies to be reported to the manager, the problem arises in the process of in wrong time reporting the management structures of the business entity. To eliminate this problem, management implements a special approach to internal audit, called continuous auditing.

Assessment of occupational exposure due to intakes of radionuclides. Safety guide

International Nuclear Information System (INIS)

2004-01-01

Occupational exposure due to radioactive materials can occur as a result of various human activities. These include work associated with the different stages of the nuclear fuel cycle, the use of radioactive sources in medicine, scientific research, agriculture and industry, and occupations which involve the handling of materials containing enhanced concentrations of naturally occurring radionuclides. In order to control this exposure, it is necessary to be able to assess the magnitude of the doses involved. Three interrelated Safety Guides, prepared jointly by the IAEA and the International Labour Office (ILO), provide guidance on the application of the requirements of the Basic Safety Standards with respect to occupational exposure. Reference [3] gives general advice on the exposure conditions for which monitoring programmes should be set up to assess radiation doses arising from external radiation and from intakes of radionuclides by workers. More specific guidance on the assessment of doses from external sources of radiation can be found in Ref. [4] and the present Safety Guide deals with intakes of radioactive materials. Recommendations related to occupational radiation protection have also been developed by the International Commission on Radiological Protection (ICRP) [5]. These and other current recommendations of the ICRP [6] have been taken into account in preparing this Safety Guide. The purpose of this Safety Guide is to provide guidance for regulatory authorities on conducting assessments of intakes of radioactive material arising from occupational exposure. This Guide will also be useful to those concerned with the planning, management and operation of occupational monitoring programmes, and to those involved in the design of equipment for use in internal dosimetry and workplace monitoring

Assessment of occupational exposure due to intakes of radionuclides. Safety guide

International Nuclear Information System (INIS)

2000-01-01

Occupational exposure due to radioactive materials can occur as a result of various human activities. These include work associated with the different stages of the nuclear fuel cycle, the use of radioactive sources in medicine, scientific research, agriculture and industry, and occupations which involve the handling of materials containing enhanced concentrations of naturally occurring radionuclides. In order to control this exposure, it is necessary to be able to assess the magnitude of the doses involved. Three interrelated Safety Guides, prepared jointly by the IAEA and the International Labour Office (ILO), provide guidance on the application of the requirements of the Basic Safety Standards with respect to occupational exposure. Reference [3] gives general advice on the exposure conditions for which monitoring programmes should be set up to assess radiation doses arising from external radiation and from intakes of radionuclides by workers. More specific guidance on the assessment of doses from external sources of radiation can be found in Ref. [4] and the present Safety Guide deals with intakes of radioactive materials. Recommendations related to occupational radiation protection have also been developed by the International Commission on Radiological Protection (ICRP) [5]. These and other current recommendations of the ICRP [6] have been taken into account in preparing this Safety Guide. The purpose of this Safety Guide is to provide guidance for regulatory authorities on conducting assessments of intakes of radioactive material arising from occupational exposure. This Guide will also be useful to those concerned with the planning, management and operation of occupational monitoring programmes, and to those involved in the design of equipment for use in internal dosimetry and workplace monitoring

Assessment of occupational exposure due to intakes of radionuclides. Safety guide

International Nuclear Information System (INIS)

2001-01-01

Occupational exposure due to radioactive materials can occur as a result of various human activities. These include work associated with the different stages of the nuclear fuel cycle, the use of radioactive sources in medicine, scientific research, agriculture and industry, and occupations which involve the handling of materials containing enhanced concentrations of naturally occurring radionuclides. In order to control this exposure, it is necessary to be able to assess the magnitude of the doses involved. Three interrelated Safety Guides, prepared jointly by the IAEA and the International Labour Office (ILO), provide guidance on the application of the requirements of the Basic Safety Standards with respect to occupational exposure. Reference [3] gives general advice on the exposure conditions for which monitoring programmes should be set up to assess radiation doses arising from external radiation and from intakes of radionuclides by workers. More specific guidance on the assessment of doses from external sources of radiation can be found in Ref. [4] and the present Safety Guide deals with intakes of radioactive materials. Recommendations related to occupational radiation protection have also been developed by the International Commission on Radiological Protection (ICRP) [5]. These and other current recommendations of the ICRP [6] have been taken into account in preparing this Safety Guide. The purpose of this Safety Guide is to provide guidance for regulatory authorities on conducting assessments of intakes of radioactive material arising from occupational exposure. This Guide will also be useful to those concerned with the planning, management and operation of occupational monitoring programmes, and to those involved in the design of equipment for use in internal dosimetry and workplace monitoring

Assessment of occupational exposure due to intakes of radionuclides. Safety guide

International Nuclear Information System (INIS)

2002-01-01

Occupational exposure due to radioactive materials can occur as a result of various human activities. These include work associated with the different stages of the nuclear fuel cycle, the use of radioactive sources in medicine, scientific research, agriculture and industry, and occupations which involve the handling of materials containing enhanced concentrations of naturally occurring radionuclides. In order to control this exposure, it is necessary to be able to assess the magnitude of the doses involved. Three interrelated Safety Guides, prepared jointly by the IAEA and the International Labour Office (ILO), provide guidance on the application of the requirements of the Basic Safety Standards with respect to occupational exposure. Reference [3] gives general advice on the exposure conditions for which monitoring programmes should be set up to assess radiation doses arising from external radiation and from intakes of radionuclides by workers. More specific guidance on the assessment of doses from external sources of radiation can be found in Ref. [4] and the present Safety Guide deals with intakes of radioactive materials. Recommendations related to occupational radiation protection have also been developed by the International Commission on Radiological Protection (ICRP) [5]. These and other current recommendations of the ICRP [6] have been taken into account in preparing this Safety Guide. The purpose of this Safety Guide is to provide guidance for regulatory authorities on conducting assessments of intakes of radioactive material arising from occupational exposure. This Guide will also be useful to those concerned with the planning, management and operation of occupational monitoring programmes, and to those involved in the design of equipment for use in internal dosimetry and workplace monitoring

Assessment of occupational exposure due to intakes of radionuclides. Safety guide

International Nuclear Information System (INIS)

1999-01-01

Occupational exposure due to radioactive materials can occur as a result of various human activities. These include work associated with the different stages of the nuclear fuel cycle, the use of radioactive sources in medicine, scientific research, agriculture and industry, and occupations which involve the handling of materials containing enhanced concentrations of naturally occurring radionuclides. In order to control this exposure, it is necessary to be able to assess the magnitude of the doses involved. Three interrelated Safety Guides, prepared jointly by the IAEA and the International Labour Office (ILO), provide guidance on the application of the requirements of the Basic Safety Standards with respect to occupational exposure. Reference [3] gives general advice on the exposure conditions for which monitoring programmes should be set up to assess radiation doses arising from external radiation and from intakes of radionuclides by workers. More specific guidance on the assessment of doses from external sources of radiation can be found in Ref. [4] and the present Safety Guide deals with intakes of radioactive materials. Recommendations related to occupational radiation protection have also been developed by the International Commission on Radiological Protection (ICRP) [5]. These and other current recommendations of the ICRP [6] have been taken into account in preparing this Safety Guide. The purpose of this Safety Guide is to provide guidance for regulatory authorities on conducting assessments of intakes of radioactive material arising from occupational exposure. This Guide will also be useful to those concerned with the planning, management and operation of occupational monitoring programmes, and to those involved in the design of equipment for use in internal dosimetry and workplace monitoring

Electrical Procedures and Environmental Control Systems. Building Maintenance. Module IV. Instructor's Guide.

Science.gov (United States)

Sloan, Garry

This curriculum guide, one of six modules keyed to the building maintenance competency profile developed by industry and education professionals, provides materials for two units on electrical procedures and environmental control systems. Unit 1, on electrical procedures, includes the following lessons: electrical safety; troubleshooting and…

Guide Actor-Critic for Continuous Control

OpenAIRE

Tangkaratt, Voot; Abdolmaleki, Abbas; Sugiyama, Masashi

2017-01-01

Actor-critic methods solve reinforcement learning problems by updating a parameterized policy known as an actor in a direction that increases an estimate of the expected return known as a critic. However, existing actor-critic methods only use values or gradients of the critic to update the policy parameter. In this paper, we propose a novel actor-critic method called the guide actor-critic (GAC). GAC firstly learns a guide actor that locally maximizes the critic and then it updates the polic...

Internal controls and credit risk relationship among banks in Europe

Directory of Open Access Journals (Sweden)

Ellis Kofi Akwaa-Sekyi

2017-01-01

Full Text Available Purpose: The study purport to investigate the effectiveness of internal control mechanisms, investigate whether evidence of agency problem is found among banks in Europe and determine how internal controls affect credit risk. Design/methodology/approach: Panel data from 91 banks from 23 European Union countries were studied from 2008-2014. Hausman’s specification test suggest the use of fixed effects estimation technique of GLS. Quantitatively modelled data on 15 variables covering elements of internal controls, objectives of internal controls, agency problem, bank and country specific variables were used. Findings: There is still high credit risk in spite of measures being implemented by the European Central Bank. Banks have individual entity factors that increase or decrease credit risk. The study finds effective internal control systems because objectives of internal controls are achieved and significantly determine credit risk. Agency problem is confirmed due to significant positive relation with credit risk. There is significant effect of internal controls on credit risk with specific variables as risk assessment, return on average risk weighted assets, institutional ownership, bank size, inflation, interest rate and GDP. Research limitations/implications: Missing data prevented the use of strongly balanced panel. The lack of flexibility with using quantitative approach did not allow further scrutiny of the nature of variables. However, statistical tests were acceptable for the model used. The study has implications for management and owners of banks to be warry of agency problem because that provides incentive for reckless high risk transactions that may benefit the agent than the principal. Management must engage in actions that profile the company better and enhances value maximization. Rising default risk has tendency to impair corporate image leading to loss of reputational capital. Originality/value: The study provides the use of

The Glioma International Case-Control Study

DEFF Research Database (Denmark)

Amirian, E. Susan; Armstrong, Georgina N; Zhou, Renke

2016-01-01

Decades of research have established only a few etiological factors for glioma, which is a rare and highly fatal brain cancer. Common methodological challenges among glioma studies include small sample sizes, heterogeneity of tumor subtypes, and retrospective exposure assessment. Here, we briefly...... describe the Glioma International Case-Control (GICC) Study (recruitment, 2010-2013), a study being conducted by the Genetic Epidemiology of Glioma International Consortium that integrates data from multiple data collection sites, uses a common protocol and questionnaire, and includes biospecimen...

The stages of the international drug control system.

Science.gov (United States)

Carstairs, Catherine

2005-01-01

This paper argues that the history of the international drug control system of the League of Nations/United Nations can be divided into three cumulative stages. The first stage, the supply stage, dates back to early part of the 20th century, and aimed to reduce the supply of drugs through careful monitoring and trade regulations. This has remained the dominant control strategy. In the middle of the century, demand control, in the form of treatment and criminalization of the individual user, began to appear. This was the least successful stage. Finally, in the 1980s, the dangers of the drug traffic assumed an important place on the international agenda and measures to reduce drug-related organized crime were enacted. To date, this has been a process of proliferation of regulatory strategies. Recently, new challenges to the international drug control system have emerged, including well-funded non-governmental organizations critical of the war on drugs, and the adoption of harm reduction measures in national policies around the world.

International trade agreements: a threat to tobacco control policy.

Science.gov (United States)

Shaffer, E R; Brenner, J E; Houston, T P

2005-08-01

International covenants establish a role for governments in ensuring the conditions for human health and wellbeing, which has been recognised as a central human right. International trade agreements, conversely, prioritize the rights of corporations over health and human rights. International trade agreements are threatening existing tobacco control policies and restrict the possibility of implementing new controls. This situation is unrecognised by many tobacco control advocates in signatory nations, especially those in developing countries. Recent agreements on eliminating various trade restrictions, including those on tobacco, have expanded far beyond simply international movement of goods to include internal tobacco distribution regulations and intellectual property rules regulating advertising and labelling. Our analysis shows that to the extent trade agreements protect the tobacco industry, in itself a deadly enterprise, they erode human rights principles and contribute to ill health. The tobacco industry has used trade policy to undermine effective barriers to tobacco importation. Trade negotiations provide an unwarranted opportunity for the tobacco industry to assert its interests without public scrutiny. Trade agreements provide the industry with additional tools to obstruct control policies in both developed and developing countries and at every level. The health community should become involved in reversing these trends, and help promote additional measures to protect public health.

National Transportation Safety Board : weak internal control impaired financial accountability

Science.gov (United States)

2001-09-28

The U. S. General Accounting Office (GAO) was asked to review the National Transportation Safety Board's (NTSB) internal controls over selected types of fiscal year expenditures. They were asked to determine whether internal control weaknesses were a...

Guided online or face-to-face cognitive behavioral treatment for insomnia: A randomized wait-list controlled trial

NARCIS (Netherlands)

Lancee, J.; van Straten, A.; Morina, N.; Kaldo, V.; Kamphuis, J.H.

2016-01-01

Study Objectives: To compare the efficacy of guided online and individual face-to-face cognitive behavioral treatment for insomnia (CBT-I) to a wait-list condition. Methods: A randomized controlled trial comparing three conditions: guided online; face-to-face; wait-list. Posttest measurements were

17 CFR 229.308 - (Item 308) Internal control over financial reporting.

Science.gov (United States)

2010-04-01

... over financial reporting. 229.308 Section 229.308 Commodity and Securities Exchanges SECURITIES AND... § 229.308 (Item 308) Internal control over financial reporting. (a) Management's annual report on internal control over financial reporting. Provide a report of management on the registrant's internal...

Computational fluid dynamic analysis of a guide tube in a PWR

International Nuclear Information System (INIS)

Hofmann, F.; Archambeau, F.; Chaize, C.

2000-01-01

Security in nuclear power plants demands severe limitations of the maximal drop time of rod cluster control assemblies. In February 1995, several assemblies of the Chinese plant in Daya Bay failed to comply with these requirements. Electricite De France undertook a research program to get a better insight of this problem since the plant has been built by French and also because the French new four-loops N4 reactor was equipped with the same guide tubes. This paper is limited to a numerical study of the influence of the pressure forces applied to control rods and due to flow circulation through the guide tubes. After a validation test case, a first calculation has been carried out on a simplified N4 guide tube. The sensitivity of the pressure forces to transverse flow and to modifications of the geometry has been determined. The program has been extended to guide tubes used in 1300-MW reactors and similar computations have been done. To make simulations more representative, a global computation of the flow in the whole upper internals plenum (UIP) will be achieved to provide accurate boundary conditions for local calculations with better resolution.

Computational fluid dynamic analysis of a guide tube in a PWR

International Nuclear Information System (INIS)

Hofmann, F.; Archambeau, F.

1997-01-01

Security in nuclear power plants demands severe limitations of the maximal drop time of rod cluster control assemblies. In February 1995, several assemblies of the Chinese plant in DAYA BAY failed to comply with these requirements. Electricite de France undertook a research program to get a better insight of this problem since the plant has been built by French and also because the French new 4 loops N4 reactor was equipped with the same guide tubes. This paper is limited to a numerical study of the influence of the pressure forces applied to control rods and due to flow circulation through the guide tubes. After a validation test-case, a first calculation has been carried out on a simplified N4 guide tube. The sensitivity of the pressure forces to transverse flow and to modifications of the geometry has been determined. The program has been extended to guide tubes used in 1300 MW reactors and similar computations have been done. To make simulations more representative, a global computation of the flow in the whole upper internals plenum (UIP) will be achieved to provide accurate boundary conditions for local calculations with better resolution. (author)

Internal laboratory control in residue analysis of chlorinated hydrocarbons

Energy Technology Data Exchange (ETDEWEB)

1980-01-01

The thesis contains a chapter on gaschromatographic system in which gas current, temperatures, separation system, detector system, recorder, dosing system and integrator are described. The chapter on reagents deals with standards and solvents, absorbents and other reagents. The chapter on laboratory equipment deals with general recommendations for apparatus, purification and total numerical result of blank test. The chapter ''Methods'' contains general references, aptitude for a special problem, common investigations and control by standard reference materials. The chapter on the work up of samples treats extraction, purification, concentrating the solution, internal standard, multiple determination and control samples. The chapter on measurement presents calibration, internal standard, multiple determination, securing the result and control samples. The chapter on evaluation consists of qualitative and quantitave evaluation, decision criteria and communication of the result. The chapter of documentation described routine investigations, tests and controls of internal laboratory control, preliminary works, maintenance and service works.

The importance of domestic law to international arms control

International Nuclear Information System (INIS)

Lehman, R.F. II.

1993-11-01

Studies of arms control and disarmament tend to focus on political, military, and diplomatic processes. Recently, in the context of the conversion of defense activities to civilian use, the economic aspects of arms control have also received renewed interest. The legal dimension, however, is in need of fresh examination. Both international and domestic law are sailing increasingly in uncharted waters. Recent arms control agreements and related developments in international peacekeeping have expanded the scope of international law and altered how one perceives certain fundamentals, including the principle of national sovereignty. Still, the nation state is largely unchallenged as the primary actor in international affairs. National governments retain near absolute sovereign rights and responsibilities even in an age of trans-national economic integration and codified international norms for human rights, freedom of the press, and the peaceful resolution of disputes. Indeed, the role of domestic law in arms control and disarmament may be more significant now than ever before. A brief review of relationships between arms control and domestic law should illustrate ways in which ones thinking has been underestimating the importance of domestic law. Hopefully, this survey will set the stage properly for the excellent, more detailed case studies by Elinor Hammarskjold and Alan Crawford. Toward that end, this paper will highlight a number of more general, and sometimes provocative, themes. These themes should be kept in mind when those two complementary presentations are considered

The importance of domestic law to international arms control

Energy Technology Data Exchange (ETDEWEB)

Lehman, R.F. II

1993-11-01

Studies of arms control and disarmament tend to focus on political, military, and diplomatic processes. Recently, in the context of the conversion of defense activities to civilian use, the economic aspects of arms control have also received renewed interest. The legal dimension, however, is in need of fresh examination. Both international and domestic law are sailing increasingly in uncharted waters. Recent arms control agreements and related developments in international peacekeeping have expanded the scope of international law and altered how one perceives certain fundamentals, including the principle of national sovereignty. Still, the nation state is largely unchallenged as the primary actor in international affairs. National governments retain near absolute sovereign rights and responsibilities even in an age of trans-national economic integration and codified international norms for human rights, freedom of the press, and the peaceful resolution of disputes. Indeed, the role of domestic law in arms control and disarmament may be more significant now than ever before. A brief review of relationships between arms control and domestic law should illustrate ways in which ones thinking has been underestimating the importance of domestic law. Hopefully, this survey will set the stage properly for the excellent, more detailed case studies by Elinor Hammarskjold and Alan Crawford. Toward that end, this paper will highlight a number of more general, and sometimes provocative, themes. These themes should be kept in mind when those two complementary presentations are considered.

13 CFR 108.506 - Safeguarding the NMVC Company's assets/Internal controls.

Science.gov (United States)

2010-01-01

... assets/Internal controls. 108.506 Section 108.506 Business Credit and Assistance SMALL BUSINESS... Requirements § 108.506 Safeguarding the NMVC Company's assets/Internal controls. You must adopt a plan to... document describing your control procedures. ...

The hitchhiker's guide to altruism: gene-culture coevolution, and the internalization of norms.

Science.gov (United States)

Gintis, Herbert

2003-02-21

An internal norm is a pattern of behavior enforced in part by internal sanctions, such as shame, guilt and loss of self-esteem, as opposed to purely external sanctions, such as material rewards and punishment. The ability to internalize norms is widespread among humans, although in some so-called "sociopaths", this capacity is diminished or lacking. Suppose there is one genetic locus that controls the capacity to internalize norms. This model shows that if an internal norm is fitness enhancing, then for plausible patterns of socialization, the allele for internalization of norms is evolutionarily stable. This framework can be used to model Herbert Simon's (1990) explanation of altruism, showing that altruistic norms can "hitchhike" on the general tendency of internal norms to be personally fitness-enhancing. A multi-level selection, gene-culture coevolution argument then explains why individually fitness-reducing internal norms are likely to be prosocial as opposed to socially harmful.

Women's perceived internal control of future pregnancy outcomes and its related factors.

Science.gov (United States)

Maleki, Azam; Mazloomzadeh, Saeideh

2013-03-01

With regards to the importance of women's beliefs in improving pregnancy outcomes, this study was performed to determine the perceived internal control on future pregnancy outcomes and its related factors in women who participated in pre-marital counseling. In a cross-sectional study, women's perceived internal control was investigated. The study population comprised the women in reproductive age of whom 400 were selected by random sampling. Data collection instrument was a questionnaire consisting of demographic, pre-conceptional care, and internal control questions. Two categories of favorite and not favorite levels of internal control were defined based on the total score. The validity of the questionnaire was determined via content validity method by use of experts' opinion and its reliability was evaluated through the calculation of Cronbach's alpha coefficient which was 0.76. Data were analyzed through frequency tables, correlation coefficient, and Chi-square test at the confidence level of 0.95. Two hundred sixty-five (65%) women had a good perceived internal control and it was significantly associated with the age, educational level, and hearing about pre-conceptional care. The internal control score also showed a positive and significant correlation with both age and the subject knowledge about folic acid (r = 0.19 and r = 0.15, respectively). The majority of women had a favorite perceived internal control. Since age and educational level were the affecting factors on the perceived internal control of women, promoting the level of internal control in young women and those with low education in pre-marital counseling classes seems necessary.

Performance of International Space Station Alpha Trace Contaminant Control Systems

Science.gov (United States)

Perry, J. L.

2016-01-01

The analysis presented herein was conducted during the early transitional period between the Space Station Freedom and the International Space Station programs as part of an effort to evaluate key design specifications and standards used by the United States and Russia. The analysis was originally documented under NASA cover letter ED62(36-94) dated August 16, 1994. The analysis was revised and rereleased under NASA cover letter ED62(51-94) dated November 14, 1994. These cover letters are provided here to guide programmatic context for the reader.

Guide to robots and remote-controlled tools used in French nuclebar power plants

International Nuclear Information System (INIS)

Ferriole, G.

1987-01-01

Three types of robots are used in French nuclear plants: 1) Tool carriers for steam generator channel heads 2) Autonomous tool carriers and 3) Multifunctional tool carriers. Tool carriers for steam generator channel heads have been designed to perform only maintenance activities inside the channel head of steam generators and especially on the tubes. The shape and size of these carriers are adapted to the channel heads which is their only application. Autonomous carriers are tank-type vehicles with full tractor treads and their capacity ranges from 20 to 150 kg. These vehicles are used mainly for televisual inspection of the instrumentation penetrations underneath the pressure vessel and the upper pressure vessel internal structures (inspection of control rod guide tube split pins). Multifunctional tool carriers are developed to perform exceptional maintenance tasks of a nongeneric type in an environment with very high irradiation fields, that are inaccessible to a human operator. This means that such tasks are not always clearly defined and their execution is liable to change during the process. The different tasks can be delicate to perform and highly complex, e.g.: recovering a dropped fuel element, underwater measuration, dismantling of mechanical equipment, etc

Standard guide for application of radiation monitors to the control and physical security of special nuclear material

International Nuclear Information System (INIS)

Anon.

1989-01-01

This guide briefly describes the state-of-the-art of radiation monitors for detecting special nuclear material (SNM) in order to establish the context in which to write performance standards for the monitors. This guide extracts information from technical documentation to provide information for selecting, calibrating, testing, and operating such radiation monitors when they are used for the control and protection of SNM. This guide offers an unobtrusive means of searching pedestrians, packages, and motor vehicles for concealed SNM as one part of a nuclear material control or security plan for nuclear materials. The radiation monitors can provide an efficient, sensitive, and reliable means of detecting the theft of small quantities of SNM while maintaining a low likelihood of nuisance alarms

GreyGuide Forum and Repository

OpenAIRE

Biagioni, Stefania; Farace, Dominic

2014-01-01

We present the GreyGuide: an online forum and repository of good practice in the field of grey literature. The launch of the GreyGuide Repository took place in December 2013 at the Fifteenth International Conference on Grey Literature. Since then, the acquisition of both proposed and published good practices are underway. The GreyGuide as an online forum is currently in a developmental stage and is influenced by the changes that have taken place in GreyNet's new infrastructure commencing in J...

Non-proliferation through effective international control, with particular reference to peaceful uses of nuclear material as a result of nuclear disarmament and international control of plutonium

International Nuclear Information System (INIS)

Imai, Ryukichi

1993-01-01

The role of nuclear factors in the international political situation has changed. The emphasis is now on the new circumstance of the post cold-war world. Non-proliferation is dealt with through effective international control, with particular reference to peaceful uses of nuclear material as a result of nuclear weapons dismantling and international control of plutonium

Engine Tune-up Service. Unit 6: Emission Control Systems. Student Guide. Automotive Mechanics Curriculum.

Science.gov (United States)

Bacon, E. Miles

This student guide is for Unit 6, Emission Control Systems, in the Engine Tune-Up Service portion of the Automotive Mechanics Curriculum. It deals with inspecting, testing, and servicing an emission control system. A companion review exercise book and posttests are available separately as CE 031 221-222. An introduction tells how this unit fits…

Design report on the guide box-reactivity and safety control plates for MPR reactor under normal operation conditions

International Nuclear Information System (INIS)

Markiewicz, M.

1999-01-01

The reactivity control system for the MPR reactor (Multi Purpose Reactor) is a critical component regarding safety, it must ensure a fast shut down, maintaining the reactor in subcritical condition under normal or accidental operation condition. For this purpose, this core component must be designed to maintain its operating capacity during all the residence time and under any foreseen operation condition. The mechanical design of control plates and guide boxes must comply with structural integrity, maintaining its geometric and dimensional stability within the pre-established limits to prevent interferences with other core components. For this, the heat generation effect, mechanical loads and environment and irradiation effects were evaluated during the mechanical design. The reactivity control system is composed of guide boxes, manufactured from Aluminium alloy, located between the fuel elements, and control absorber plates of Ag-In-Cd alloy hermetically enclosed by a cladding of stainless steel sliding inside de guide boxes. The upward-downward movement is transmitted by a rod from the motion device located at the reactor lower part. The design requirements, criteria and limits were established to fulfill with the normal and abnormal operation conditions. The design verifications were performed by analytical method, estimating the guide box and control plates residence time. The result of the analysis performed, shows that the design of the reactivity control system and the material selected, are appropriate to fulfill the functional requirements, with no failures attributed to the mechanical design. (author)

Simulated experimental research on flow field near control rod guide tubes

International Nuclear Information System (INIS)

Yu Ping'an; Shen Xiuzhong; Yang Guanyue; He Fangzheng; Gao Weiguo; Zhang Zhiyi; Tian Ji'an

1997-01-01

The paper presents the velocity measurement in the 1/4 scale transparent model of PWR pressure vessel upper plenum of 300 MW nuclear power plant by employing dynamic resistance strain foil velocity measurement technology and laser Doppler velocity measurement technology which have no effect on the flow field. In the experiment water is chosen as the fluid. As a result of the measurement the hydraulic load on the control rods is clarified and the experimental basis is provided for the analysis of whether the control rods are moving upward and downward freely and drop rapidly in emergency case by order. Meantime it also provides the experimental basis for the optical design of the control rod guide tubes and bundles

Internal medicine. An illustrated radiological guide

International Nuclear Information System (INIS)

Al-Tubaikh, Jarrah Ali; Sabah Hospital, Kuwait

2010-01-01

This book explains how radiology can be a powerful tool for establishing the diagnosis of many internal medicine diseases that are usually diagnosed on the basis of their laboratory or clinical presentation. It is organized in the classic fashion for internal medicine books, with eleven chapters covering the different internal medicine specialties. Within these chapters, more than 450 diseases are considered, some of which are rarely encountered but are nonetheless significant. For each disease, radiological and clinical features are displayed in images and high-quality digital medical illustrations, and those differential diagnoses are identified that can be ruled out by imaging alone. In addition, the pathophysiology underlying the radiological features is described, enabling the reader to understand why a particular sign is seen on MR images, CT scans, or plain radiographs. The book will serve as an excellent radiological atlas for internal medicine practitioners and family physicians, showing disease presentations that may be hard to find in standard medical textbooks and explaining which imaging modalities are likely to be most informative in particular patients. (orig.)

Internal Corrosion Control of Water Supply Systems Code of Practice

Science.gov (United States)

This Code of Practice is part of a series of publications by the IWA Specialist Group on Metals and Related Substances in Drinking Water. It complements the following IWA Specialist Group publications: 1. Best Practice Guide on the Control of Lead in Drinking Water 2. Best Prac...

32 CFR Appendix B to Part 327 - Internal Management Control Review Checklist

Science.gov (United States)

2010-07-01

... 32 National Defense 2 2010-07-01 2010-07-01 false Internal Management Control Review Checklist B... B to Part 327—Internal Management Control Review Checklist (a) Task: Personnel and/or Organization... See footnote 2 to this Appendix B. (1) I attest that the above listed internal controls provide...

47 CFR 90.475 - Operation of internal transmitter control systems in specially equipped systems.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Operation of internal transmitter control... Control Internal Transmitter Control Systems § 90.475 Operation of internal transmitter control systems in specially equipped systems. (a) An internal transmitter control system need not be designed to meet the...

User Guide for the International Jobs and Economic Development Impacts Model

Energy Technology Data Exchange (ETDEWEB)

Keyser, David [National Renewable Energy Lab. (NREL), Golden, CO (United States); Flores-Espino, Francisco [National Renewable Energy Lab. (NREL), Golden, CO (United States); Uriarte, Caroline [National Renewable Energy Lab. (NREL), Golden, CO (United States); Cox, Sadie [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2016-09-01

The International Jobs and Economic Development Impacts (I-JEDI) model is a freely available economic model that estimates gross economic impacts from wind, solar, and geothermal energy projects for several different countries. Building on the original JEDI model, which was developed for the United States, I-JEDI was developed under the USAID Enhancing Capacity for Low Emission Development Strategies (EC-LEDS) program to support countries in assessing economic impacts of LEDS actions in the energy sector. I-JEDI estimates economic impacts by characterizing the construction and operation of energy projects in terms of expenditures and the portion of these expenditures made within the country of analysis. These data are then used in a country-specific input-output (I-O) model to estimate employment, earnings, gross domestic product (GDP), and gross output impacts. Total economic impacts are presented as well as impacts by industry. This user guide presents general information about how to use I-JEDI and interpret results as well as detailed information about methodology and model limitations.

Role of limb and target vision in the online control of memory-guided reaches.

Science.gov (United States)

Heath, Matthew

2005-07-01

This investigation tested the proposal that a "highly accurate" and temporally unstable stored target representation is available to the motor system for the online control of memory-guided reaches. Participants reached to a target that was: (a) visible during the response, (b) extinguished at movement onset, and (c) occluded for 0, 500, 1,500 and 2,500 ms in advance of response cueing. Additionally, trials were performed with (i.e., limb visible) and without (i.e., limb occluded) vision of the reaching limb. Results showed that limb occluded trials undershot the target location in each target condition, and were characterized by a primarily offline mode of control. In contrast, limb visible trials showed a consistent level of endpoint accuracy for each target condition and elicited more online reaching corrections than limb occluded trials. It is therefore proposed that a reasonably accurate and temporally stable stored target representation can be combined with vision of the moving limb for the online control of memory-guided reaches.

Database of Literature on Guided Imagery and Music and Related Topics

DEFF Research Database (Denmark)

Bonde, Lars Ole

2015-01-01

A March 2015 update of the largest international database on literature on Guided Imagery and Music and related topics.......A March 2015 update of the largest international database on literature on Guided Imagery and Music and related topics....

Internal cost control on the ecological quality of products

Directory of Open Access Journals (Sweden)

N.P. Syroid

2018-04-01

Full Text Available To improve the environmental quality of products due attention should be paid to control the processes related to environmental quality input of the product. The results of the study help to state the purpose and objectives of the control, also to define objects for internal control of operations cost of environmental quality. So, we believe that the main purpose of internal cost control on the ecological quality of products is the establishment of the correctness and legality of business operations, prevention of violations and abuses in the expenditure of natural, labour, material and financial resources to ensure the minimization of negative impact on the health of consumers and the environment. The basic objectives of internal control of expenditure are brought forward, but it should be noted that they can vary and depend on the size, structure, spheres and types of economic activity of the enterprise, the requirements of management personnel. In the process of identifying the objects of control of environmental quality it should be noted that this list is not exhaustive, but it is most relevant to highlight objects such as genetically modified organisms and waste production. Also the subjects of cost control to environmental quality, their functions and the information base for monitoring are determined. Proper organization of the process of internal cost control on the ecological quality of products would benefit from a clear documentation of transactions, timely and complete registration of accounting data in the registers, the true reflection of information in managerial financial reporting and ensure reduction of the negative impact on the health of consumers and the environment.

Agent-Oriented Embedded Control System Design and Development of a Vision-Based Automated Guided Vehicle

Directory of Open Access Journals (Sweden)

Wu Xing

2012-07-01

Full Text Available This paper presents a control system design and development approach for a vision-based automated guided vehicle (AGV based on the multi-agent system (MAS methodology and embedded system resources. A three-phase agent-oriented design methodology Prometheus is used to analyse system functions, construct operation scenarios, define agent types and design the MAS coordination mechanism. The control system is then developed in an embedded implementation containing a digital signal processor (DSP and an advanced RISC machine (ARM by using the multitasking processing capacity of multiple microprocessors and system services of a real-time operating system (RTOS. As a paradigm, an onboard embedded controller is designed and developed for the AGV with a camera detecting guiding landmarks, and the entire procedure has a high efficiency and a clear hierarchy. A vision guidance experiment for our AGV is carried out in a space-limited laboratory environment to verify the perception capacity and the onboard intelligence of the agent-oriented embedded control system.

Fuzzy Logic Based Set-Point Weighting Controller Tuning for an Internal Model Control Based PID Controller

Directory of Open Access Journals (Sweden)

Maruthai Suresh

2009-10-01

Full Text Available Controller tuning is the process of adjusting the parameters of the selected controller to achieve optimum response for the controlled process. For many of the control problems, a satisfactory performance is obtained by using PID controllers. One of the main problems with mathematical models of physical systems is that the parameters used in the models cannot be determined with absolute accuracy. The values of the parameters may change with time or various effects. In these cases, conventional controller tuning methods suffer when trying a lot to produce optimum response. In order to overcome these difficulties a fuzzy logic based Set- Point weighting controller tuning method is proposed. The effectiveness of the proposed scheme is analyzed through computer simulation using SIMULINK software and the results are presented. The fuzzy logic based simulation results are compared with Cohen-Coon (CC, Ziegler- Nichols (ZN, Ziegler – Nichols with Set- Point weighting (ZN-SPW, Internal Model Control (IMC and Internal model based PID controller responses (IMC-PID. The effects of process modeling errors and the importance of controller tuning have been brought out using the proposed control scheme.

Dimensional control and check of field machining parts for reactor internals installation

International Nuclear Information System (INIS)

Zhang Caifang

2010-01-01

Some key issues of dimensional control for reactor internals installation are analyzed, and important technical requirements of crucial quality control elements on the measurement, machining, and checking of reactor internals filed machining parts are discussed. Moreover, provisions on quality control and risk prevention of reactor internals filed machining parts are presented in this paper. (author)

An Analysis of Internal Controls and Procurement Fraud Deterrence

Science.gov (United States)

2013-12-01

might keep the organization from achieving its objectives and analyze risks , including fraud risk , so as to decide how the risk should be managed ( COSO ...internal control to adequately manage the risk ( COSO , 2013). Risk management involves developing the effective internal control targeted at a...structure and management . While the risk of fraud cannot be eliminated entirely, it can be greatly reduced with an appropriate procurement fraud prevention

Climatic changes, the international control stakes

International Nuclear Information System (INIS)

Maljean-Dubois, S.

2007-01-01

The author presents a juridical and economic analysis of the control mechanism called ''observance'' of the Kyoto protocol. This political and juridical innovation in the domain of the international agreements on the environment deals with the national sovereignty and the economical development mode. (A.L.B.)

Clinical practice of image-guided spine radiosurgery - results from an international research consortium

Directory of Open Access Journals (Sweden)

Guckenberger Matthias

2011-12-01

Full Text Available Abstract Background Spinal radiosurgery is a quickly evolving technique in the radiotherapy and neurosurgical communities. However, the methods of spine radiosurgery have not been standardized. This article describes the results of a survey about the methods of spine radiosurgery at five international institutions. Methods All institutions are members of the Elekta Spine Radiosurgery Research Consortium and have a dedicated research and clinical focus on image-guided radiosurgery. The questionnaire consisted of 75 items covering all major steps of spine radiosurgery. Results Strong agreement in the methods of spine radiosurgery was observed. In particular, similarities were observed with safety and quality assurance playing an important role in the methods of all institutions, cooperation between neurosurgeons and radiation oncologists in case selection, dedicated imaging for target- and organ-at-risk delineation, application of proper safety margins for the target volume and organs-at-risk, conformal planning and precise image-guided treatment delivery, and close clinical and radiological follow-up. In contrast, three major areas of uncertainty and disagreement were identified: 1 Indications and contra-indications for spine radiosurgery; 2 treatment dose and fractionation and 3 tolerance dose of the spinal cord. Conclusions Results of this study reflect the current practice of spine radiosurgery in large academic centers. Despite close agreement was observed in many steps of spine radiosurgery, further research in form of retrospective and especially prospective studies is required to refine the details of spinal radiosurgery in terms of safety and efficacy.

25 CFR 542.7 - What are the minimum internal control standards for bingo?

Science.gov (United States)

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false What are the minimum internal control standards for bingo... SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.7 What are the minimum internal control standards for... utilized, alternate documentation and/or procedures that provide at least the level of control described by...

PERFORMANCE IN INTERNAL CONTROL AND RISK MANAGEMENT

OpenAIRE

JELER (POPA) IOANA; FOCŞAN ELEONORA IONELA; CORICI MARIAN CĂTĂLIN

2017-01-01

The purpose of this article is to highlight the importance of internal control and risk management. In practice, economic entities meet a variety of risks that have the origins from the internal environment or the external one. Although there are different of views on addressing the concept of risk - threats or opportunities, event or action, accordingly uncertain, proposed by specialists in risk management in this article we try to present these issues and identify techniques to ...

Treatment of child anxiety disorders via guided parent-delivered cognitive-behavioural therapy: randomised controlled trial.

Science.gov (United States)

Thirlwall, Kerstin; Cooper, Peter J; Karalus, Jessica; Voysey, Merryn; Willetts, Lucy; Creswell, Cathy

2013-12-01

Promising evidence has emerged of clinical gains using guided self-help cognitive-behavioural therapy (CBT) for child anxiety and by involving parents in treatment; however, the efficacy of guided parent-delivered CBT has not been systematically evaluated in UK primary and secondary settings. To evaluate the efficacy of low-intensity guided parent-delivered CBT treatments for children with anxiety disorders. A total of 194 children presenting with a current anxiety disorder, whose primary carer did not meet criteria for a current anxiety disorder, were randomly allocated to full guided parent-delivered CBT (four face-to-face and four telephone sessions) or brief guided parent-delivered CBT (two face-to-face and two telephone sessions), or a wait-list control group (trial registration: ISRCTN92977593). Presence and severity of child primary anxiety disorder (Anxiety Disorders Interview Schedule for DSM-IV, child/parent versions), improvement in child presentation of anxiety (Clinical Global Impression - Improvement scale), and change in child anxiety symptoms (Spence Children's Anxiety Scale, child/parent version and Child Anxiety Impact scale, parent version) were assessed at post-treatment and for those in the two active treatment groups, 6 months post-treatment. Full guided parent-delivered CBT produced superior diagnostic outcomes compared with wait-list at post-treatment, whereas brief guided parent-delivered CBT did not: at post-treatment, 25 (50%) of those in the full guided CBT group had recovered from their primary diagnosis, compared with 16 (25%) of those on the wait-list (relative risk (RR) 1.85, 95% CI 1.14-2.99); and in the brief guided CBT group, 18 participants (39%) had recovered from their primary diagnosis post-treatment (RR = 1.56, 95% CI 0.89-2.74). Level of therapist training and experience was unrelated to child outcome. Full guided parent-delivered CBT is an effective and inexpensive first-line treatment for child anxiety.

The role of a company’s internal control system in fraud prevention

Directory of Open Access Journals (Sweden)

Dragomir Dimitrijevic

2016-01-01

Full Text Available The emergence of internal control over specific segments of activities has been associated with management needs for evaluation of the consistency between the actual situation and development targets. Monitoring activities should enable detection and timely reaction to possible target-related deviations. While responding to complex market needs, companies are exposed to numerous internal and external influences, some of which may cause significant damage. Companies have realized that it is safer and cheaper to establish their own internal control systems in order to prevent such influences. The aim of this work is to show how the overall quality of control and The emergence of internal control over specific segments of activities has been associated with management needs for evaluation of the consistency between the actual situation and development targets. Monitoring activities should enable detection and timely reaction to possible target-related deviations. While responding to complex market needs, companies are exposed to numerous internal and external influences, some of which may cause significant damage. Companies have realized that it is safer and cheaper to establish their own internal control systems in order to prevent such influences. The aim of this work is to show how the overall quality of control and company performance is improved through implementation of preventive methods by internal controls, and to indicate that a developed system of internal control represents a protective barrier against various kinds of data manipulation and fraud inside the companies. Special attention was paid to fraud in financial statements since it can cause the most serious damage leading to instability of the economic-financial environment.

Friction control using ultrasonic oscillation for rolling-element linear-motion guide

International Nuclear Information System (INIS)

Oiwa, Takaaki

2006-01-01

This article reports a friction-control method for rolling-element linear-motion guides used for precision positioning. In general, static friction greater than dynamic friction generates stick-slip motion and diminishes the positioning accuracy. Two ultrasonic actuators excite both the rail and the carriage of the guide to give relative displacements to bearing surfaces. In order to effectively propagate the vibration over the entire rail without damping, the actuator drives at that frequency with a half wavelength corresponding to the distances between the rail mounting bolts. This also minimizes undesirable vibration of the machine structure. Moreover, the bearing surfaces of the carriage are resonated by a second ultrasonic actuator. The experiments using a force sensor showed that the static and dynamic friction forces were reduced by approximately 25% at any place on the 600-mm-long rail. Moreover, excitation only at very low velocity decreased the static friction peak

High contrast sensitivity for visually guided flight control in bumblebees.

Science.gov (United States)

Chakravarthi, Aravin; Kelber, Almut; Baird, Emily; Dacke, Marie

2017-12-01

Many insects rely on vision to find food, to return to their nest and to carefully control their flight between these two locations. The amount of information available to support these tasks is, in part, dictated by the spatial resolution and contrast sensitivity of their visual systems. Here, we investigate the absolute limits of these visual properties for visually guided position and speed control in Bombus terrestris. Our results indicate that the limit of spatial vision in the translational motion detection system of B. terrestris lies at 0.21 cycles deg -1 with a peak contrast sensitivity of at least 33. In the perspective of earlier findings, these results indicate that bumblebees have higher contrast sensitivity in the motion detection system underlying position control than in their object discrimination system. This suggests that bumblebees, and most likely also other insects, have different visual thresholds depending on the behavioral context.

Investigating the Role of International Law in Controlling Communicable Diseases

Directory of Open Access Journals (Sweden)

Aliasghar Kheirkhah

2017-02-01

Full Text Available International law globally plays a key role in the surveillance and control of communicable diseases. Throughout the nineteenth century, international law played a dominant role in harmonizing the inconsistent national quarantine regulations of European nation states; facilitating the exchange of epidemiological information on infectious diseases; establishing international health organizations; and standardization of surveillance. Today, due to changed forms of infectious diseases and individuals' lifestyles as well as individuals' proximity caused by increased air travels, communicable diseases are in an international and cross-border form. In this regard, binding regulations and inconsistent rules adopted in international multilateral institutions like the World Health Organization, World Trade Organization, Food and Agriculture Organization can be of great use in surveillance and control of communicable diseases. With the globalization of public health, international law can be used as an essential tool in monitoring global health and reducing human vulnerability and mortality.

Posterior Cerebral Infarction following Loss of Guide Wire

OpenAIRE

Bugnicourt, Jean-Marc; Belhomme, Denis; Bonnaire, Bruno; Constans, Jean-Marc; Manaouil, Cécile

2013-01-01

Stroke after internal jugular venous cannulation typically leads to acute carotid or vertebral arteries injury and cerebral ischemia. We report the first case of delayed posterior cerebral infarction following loss of guide wire after left internal jugular venous cannulation in a 46-year-old woman with a history of inflammatory bowel disease. Our observation highlights that loss of an intravascular guide wire can be a cause of ischemic stroke in patients undergoing central venous catheterizat...

Security guide for subcontractors

Energy Technology Data Exchange (ETDEWEB)

Adams, R.C.

1991-01-01

This security guide of the Department of Energy covers contractor and subcontractor access to DOE and Mound facilities. The topics of the security guide include responsibilities, physical barriers, personnel identification system, personnel and vehicular access controls, classified document control, protecting classified matter in use, storing classified matter repository combinations, violations, security education clearance terminations, security infractions, classified information nondisclosure agreement, personnel security clearances, visitor control, travel to communist-controlled or sensitive countries, shipment security, and surreptitious listening devices.

Sampling a guide for internal auditors

CERN Document Server

Apostolou, Barbara

2004-01-01

While it is possible to examine 100 percent of an audit customer's data, the time and cost associated with such a study are often prohibitive. To obtain sufficient, reliable, and relevant information with a limited data set, sampling is an efficient and effective tool. It can help you evaluate the customer's assertions, as well as reach audit conclusions and provide reasonable assurance to your organization. This handbook will help you understand sampling. It also serves as a guide for auditors and students preparing for certification. Topics include: An overview of sampling. Statistical and nonstatistical sampling issues. Sampling selection methods and risks. The pros and cons of popular sampling plans.

25 CFR 900.54 - Should the property management system prescribe internal controls?

Science.gov (United States)

2010-04-01

... System Standards § 900.54 Should the property management system prescribe internal controls? Yes. Effective internal controls should include procedures: (a) For the conduct of periodic inventories; (b) To... 25 Indians 2 2010-04-01 2010-04-01 false Should the property management system prescribe internal...

78 FR 68447 - Exposure Draft-Standards for Internal Control in the Federal Government

Science.gov (United States)

2013-11-14

... GOVERNMENT ACCOUNTABILITY OFFICE Exposure Draft--Standards for Internal Control in the Federal... revisions to the Standards for Internal Control in the Federal Government, known as the ``Green Book,'' to... proposed changes contained in the 2013 Exposure Draft update to the Standards for Internal Control in the...

49 CFR 192.476 - Internal corrosion control: Design and construction of transmission line.

Science.gov (United States)

2010-10-01

... 49 Transportation 3 2010-10-01 2010-10-01 false Internal corrosion control: Design and... STANDARDS Requirements for Corrosion Control § 192.476 Internal corrosion control: Design and construction... the risk of internal corrosion. At a minimum, unless it is impracticable or unnecessary to do so, each...

Evaluation of information technology impact on effective internal control in the University system

Energy Technology Data Exchange (ETDEWEB)

Sanusi Fasilat, A., E-mail: Fasilat17@gmail.com; Hassan, Haslinda, E-mail: lynn@uum.edu.my [School of Accountancy, College of Business, Universiti Utara Malaysia, Sintok, Kedah (Malaysia)

2015-12-11

Information Technology (IT) plays a key role in internal control system in various organizations in terms of maintaining records and other internal services. Internal control system is defined as an efficient control procedures set up by firm to safeguard resources and to assure the reliability and accuracy of both financial and non-financial records in line with applicable governance and procedure to acquire the established goal and objectives. This paper focuses on the impact of IT on internal control system in the Nigerian universities. Data are collected from three different universities via questionnaire. Descriptive statistics is used to analyze the data; Chi-square is performed to test the hypothesis. The results of the hypothesis showed that IT has a positive relationship with the effective internal control activities in the University system. It is concluded that the adoption of IT will significantly improve the effectiveness of the internal control system operations in the University in terms of quality service delivery.

Evaluation of information technology impact on effective internal control in the University system

International Nuclear Information System (INIS)

Sanusi Fasilat, A.; Hassan, Haslinda

2015-01-01

Information Technology (IT) plays a key role in internal control system in various organizations in terms of maintaining records and other internal services. Internal control system is defined as an efficient control procedures set up by firm to safeguard resources and to assure the reliability and accuracy of both financial and non-financial records in line with applicable governance and procedure to acquire the established goal and objectives. This paper focuses on the impact of IT on internal control system in the Nigerian universities. Data are collected from three different universities via questionnaire. Descriptive statistics is used to analyze the data; Chi-square is performed to test the hypothesis. The results of the hypothesis showed that IT has a positive relationship with the effective internal control activities in the University system. It is concluded that the adoption of IT will significantly improve the effectiveness of the internal control system operations in the University in terms of quality service delivery

Evaluation of information technology impact on effective internal control in the University system

Science.gov (United States)

Sanusi Fasilat, A.; Hassan, Haslinda

2015-12-01

Information Technology (IT) plays a key role in internal control system in various organizations in terms of maintaining records and other internal services. Internal control system is defined as an efficient control procedures set up by firm to safeguard resources and to assure the reliability and accuracy of both financial and non-financial records in line with applicable governance and procedure to acquire the established goal and objectives. This paper focuses on the impact of IT on internal control system in the Nigerian universities. Data are collected from three different universities via questionnaire. Descriptive statistics is used to analyze the data; Chi-square is performed to test the hypothesis. The results of the hypothesis showed that IT has a positive relationship with the effective internal control activities in the University system. It is concluded that the adoption of IT will significantly improve the effectiveness of the internal control system operations in the University in terms of quality service delivery.

Issues of internal control during the reform period

Directory of Open Access Journals (Sweden)

O.I. Gresova

2012-12-01

Full Text Available The paper considers theoretical and methodological problems of organization and financial control activities, the main problems and reasons causing the need for a unified system of internal financial control in the State Administration of Railway Transport of Ukraine at the stage of the reform.

Modelling and Internal Fuzzy Model Power Control of a Francis Water Turbine

Directory of Open Access Journals (Sweden)

Klemen Nagode

2014-02-01

Full Text Available This paper presents dynamic modelling of a Francis turbine with a surge tank and the control of a hydro power plant (HPP. Non-linear and linear models include technical parameters and show high similarity to measurement data. Turbine power control with an internal model control (IMC is proposed, based on a turbine fuzzy model. Considering appropriate control responses in the entire area of turbine power, the model parameters of the process are determined from a fuzzy model, which are further included in the internal model controller. The results are compared to a proportional-integral (PI controller tuned with an integral absolute error (IAE objective function, and show an improved response of internal model control.

Internal control in the company in order to financial monitoring

Directory of Open Access Journals (Sweden)

Osipov A.V.

2017-04-01

Full Text Available the article explores the definition of financial monitoring, financial analysis and internal control in aspect to their correlation to fight money laundering and terrorism financing. Internal control is analyzed from the point of view of law, economics and management. The author pays much attention in the article to the work of systems of financial monitoring in organizations.

Self-Guided Multimedia Stress Management and Resilience Training for Flight Controllers

Science.gov (United States)

Rose, R. D.; Zbozinek, T. D.; Hentschel, P. G.; Smith, S, M.; O'Brien J.; Oftedal, A.; Craske, M. G.

2016-01-01

Stress and anxiety-related problems are among the most common and costly behavioral health problems in society, and for those working in operational environments (i.e. astronauts, flight controllers, military) this can seriously impact crew performance, safety, and wellbeing. Technology-based interventions are effective for treating behavioral health problems, and can significantly improve the delivery of evidence-based health care. This study is evaluating the effectiveness, usefulness, and usability of a self-guided multimedia stress management and resilience training program in a randomized controlled trial (RCT) with a sample of flight controllers at Johnson Space Center. The intervention, SMART-OP (Stress Management and Resilience Training for Optimal Performance), is a six-session, cognitive behavioral-based computer program that uses self-guided, interactive activities to teach skills that can help individuals build resilience and manage stress. In a prior RCT with a sample of stressed but otherwise healthy individuals, SMART-OP reduced perceived stress and increased perceived control over stress in comparison to an Attention Control (AC) group. SMART-OP was rated as "highly useful" and "excellent" in usability and acceptability. Based on a-amylase data, individuals in SMART-OP recovered quicker and more completely from a social stress test as compared to the AC group [1]. In the current study, flight controllers are randomized either to receive SMART-OP training, or to a 6-week waitlist control period (WLC) before beginning SMART-OP. Eligible participants include JSC flight controllers and instructors without any medical or psychiatric disorder, but who are stressed based on self-report. Flight controllers provide a valid analog sample to astronauts in that they work in an operational setting, use similar terminology to astronauts, are mission-focused, and work under the same broader work culture. The study began in December 2014, and to date 79 flight

Managerial Accounting. Study Guide.

Science.gov (United States)

Plachta, Leonard E.

This self-instructional study guide is part of the materials for a college-level programmed course in managerial accounting. The study guide is intended for use by students in conjuction with a separate textbook, Horngren's "Accounting for Management Control: An Introduction," and a workbook, Curry's "Student Guide to Accounting for Management…

Context-dependent neural activation: internally and externally guided rhythmic lower limb movement in individuals with and without neurodegenerative disease

Directory of Open Access Journals (Sweden)

Madeleine Eve Hackney

2015-12-01

Full Text Available Parkinson’s Disease (PD is a neurodegenerative disorder that has received considerable attention in allopathic medicine over the past decades. However, it is clear that, to date, pharmacological and surgical interventions do not fully address symptoms of PD and patients’ quality of life. As both an alternative therapy and as an adjuvant to conventional approaches, several types of rhythmic movement (e.g., movement strategies, dance, tandem biking, tai chi have shown improvements to motor symptoms, lower limb control and postural stability in people with PD (Amano, Nocera, Vallabhajosula, Juncos, Gregor, Waddell et al., 2013; Earhart, 2009; M. E. Hackney & Earhart, 2008; Kadivar, Corcos, Foto, & Hondzinski, 2011; Morris, Iansek, & Kirkwood, 2009; Ridgel, Vitek, & Alberts, 2009. However, while these programs are increasing in number, still little is known about the neural mechanisms underlying motor improvements attained with such interventions. Studying limb motor control under task specific contexts can help determine the mechanisms of rehabilitation effectiveness. Both internally guided (IG and externally guided (EG movement strategies have evidence to support their use in rehabilitative programs. However, there appears to be a degree of differentiation in the neural substrates involved in IG versus EG designs. Because of the potential task specific benefits of rhythmic training within a rehabilitative context, this report will consider the use of IG and EG movement strategies, and observations produced by functional magnetic resonance imaging (fMRI and other imaging techniques. This review will present findings from lower limb imaging studies, under IG and EG conditions for populations with and without movement disorders. We will discuss how these studies might inform movement disorders rehabilitation (in the form of rhythmic, music-based movement training and highlight research gaps. We believe better understanding of lower limb neural

Effects of arthroscopy-guided suprascapular nerve block combined with ultrasound-guided interscalene brachial plexus block for arthroscopic rotator cuff repair: a randomized controlled trial.

Science.gov (United States)

Lee, Jae Jun; Hwang, Jung-Taek; Kim, Do-Young; Lee, Sang-Soo; Hwang, Sung Mi; Lee, Na Rea; Kwak, Byung-Chan

2017-07-01

The aim of this study was to compare the pain relieving effect of ultrasound-guided interscalene brachial plexus block (ISB) combined with arthroscopy-guided suprascapular nerve block (SSNB) with that of ultrasound-guided ISB alone within the first 48 h after arthroscopic rotator cuff repair. Forty-eight patients with rotator cuff tears who had undergone arthroscopic rotator cuff repair were enrolled. The 24 patients in group 1 received ultrasound-guided ISB and arthroscopy-guided SSNB; the remaining 24 patients in group 2 underwent ultrasound-guided ISB alone. Visual analogue scale pain score and patient satisfaction score were checked at 1, 3, 6, 12, 18, 24, and 48 h post-operatively. Group 1 had a lower visual analogue scale pain score at 3, 6, 12, 18, 24, and 48 h post-operatively (1.7  6.0, 6.2 > 4.3, 6.4 > 5.1, 6.9 > 5.9, 7.9 > 7.1). Six patients in group 1 developed rebound pain twice, and the others in group 1 developed it once. All of the patients in group 2 had one rebound phenomenon each (p = 0.010). The mean timing of rebound pain in group 1 was later than that in group 2 (15.5 > 9.3 h, p  4.0, p = 0.001). Arthroscopy-guided SSNB combined with ultrasound-guided ISB resulted in lower visual analogue scale pain scores at 3-24 and 48 h post-operatively, and higher patient satisfaction scores at 6-36 h post-operatively with the attenuated rebound pain compared to scores in patients who received ultrasound-guided ISB alone after arthroscopic rotator cuff repair. The combined blocks may relieve post-operative pain more effectively than the single block within 48 h after arthroscopic cuff repair. Randomized controlled trial, Level I. ClinicalTrials.gov Identifier: NCT02424630.

Posterior Cerebral Infarction following Loss of Guide Wire

Directory of Open Access Journals (Sweden)

Jean-Marc Bugnicourt

2013-01-01

Full Text Available Stroke after internal jugular venous cannulation typically leads to acute carotid or vertebral arteries injury and cerebral ischemia. We report the first case of delayed posterior cerebral infarction following loss of guide wire after left internal jugular venous cannulation in a 46-year-old woman with a history of inflammatory bowel disease. Our observation highlights that loss of an intravascular guide wire can be a cause of ischemic stroke in patients undergoing central venous catheterization.

Apply Pesticides Correctly, A Guide for Commercial Applicators: Right-of-Way Pest Control.

Science.gov (United States)

Wamsley, Mary Ann, Ed.; Vermeire, Donna M., Ed.

This guide contains basic information to meet specific standards for pesticide applicators. The text is concerned with the recognition of weeds and methods of their control in rights-of-way. Different types of application equipment both airborne and ground are discussed with precautions for the safe and effective use of herbicides. (CS)

Regulations and guides for nuclear power plants

International Nuclear Information System (INIS)

1984-01-01

The purpose of the present Guide is to provide information, guidance and recommendations to assist the regulatory body of a Member State in establishing its own regulations and guides. It discusses the purpose, the method and procedure of establishment, and the content and legal status of these documents, and it explains how to use the Codes of Practice and Safety Guides issued by the IAEA under the Nuclear Safety Standards (NUSS) programme. Certain aspects of how to use other international standards and appropriate regulations and guides from other countries are discussed

Mentoring SFRM: A New Approach to International Space Station Flight Controller Training

Science.gov (United States)

Huning, Therese; Barshi, Immanuel; Schmidt, Lacey

2008-01-01

The Mission Operations Directorate (MOD) of the Johnson Space Center is responsible for providing continuous operations support for the International Space Station (ISS). Operations support requires flight controllers who are skilled in team performance as well as the technical operations of the ISS. Space Flight Resource Management (SFRM), a NASA adapted variant of Crew Resource Management (CRM), is the competency model used in the MOD. ISS flight controller certification has evolved to include a balanced focus on development of SFRM and technical expertise. The latest challenge the MOD faces is how to certify an ISS flight controller (operator) to a basic level of effectiveness in 1 year. SFRM training uses a two-pronged approach to expediting operator certification: 1) imbed SFRM skills training into all operator technical training and 2) use senior flight controllers as mentors. This paper focuses on how the MOD uses senior flight controllers as mentors to train SFRM skills. Methods: A mentor works with an operator throughout the training flow. Inserted into the training flow are guided-discussion sessions and on-the-job observation opportunities focusing on specific SFRM skills, including: situational leadership, conflict management, stress management, cross-cultural awareness, self care and team care while on-console, communication, workload management, and situation awareness. The mentor and operator discuss the science and art behind the skills, cultural effects on skills applications, recognition of good and bad skills applications, recognition of how skills application changes subtly in different situations, and individual goals and techniques for improving skills. Discussion: This mentoring program provides an additional means of transferring SFRM knowledge compared to traditional CRM training programs. Our future endeavors in training SFRM skills (as well as other organization s) may benefit from adding team performance skills mentoring. This paper

Sierra/SolidMechanics 4.48 User's Guide: Addendum for Shock Capabilities.

Energy Technology Data Exchange (ETDEWEB)

Plews, Julia A.; Crane, Nathan K; de Frias, Gabriel Jose; Le, San; Littlewood, David John; Merewether, Mark Thomas; Mosby, Matthew David; Pierson, Kendall H.; Porter, Vicki L.; Shelton, Timothy; Thomas, Jesse David; Tupek, Michael R.; Veilleux, Michael; Xavier, Patrick G.

2018-03-01

This is an addendum to the Sierra/SolidMechanics 4.48 User's Guide that documents additional capabilities available only in alternate versions of the Sierra/SolidMechanics (Sierra/SM) code. These alternate versions are enhanced to provide capabilities that are regulated under the U.S. Department of State's International Traffic in Arms Regulations (ITAR) export-control rules. The ITAR regulated codes are only distributed to entities that comply with the ITAR export-control requirements. The ITAR enhancements to Sierra/SM in- clude material models with an energy-dependent pressure response (appropriate for very large deformations and strain rates) and capabilities for blast modeling. Since this is an addendum to the standard Sierra/SM user's guide, please refer to that document first for general descriptions of code capability and use.

Study on Fuzzy Adaptive Fractional Order PIλDμ Control for Maglev Guiding System

Science.gov (United States)

Hu, Qing; Hu, Yuwei

The mathematical model of the linear elevator maglev guiding system is analyzed in this paper. For the linear elevator needs strong stability and robustness to run, the integer order PID was expanded to the fractional order, in order to improve the steady state precision, rapidity and robustness of the system, enhance the accuracy of the parameter in fractional order PIλDμ controller, the fuzzy control is combined with the fractional order PIλDμ control, using the fuzzy logic achieves the parameters online adjustment. The simulations reveal that the system has faster response speed, higher tracking precision, and has stronger robustness to the disturbance.

Strategies for Enhancing Nonlinear Internal Model Control of pH Processes

Energy Technology Data Exchange (ETDEWEB)

Hu, Qiuping.; Rangaiah, G.P. [The National University of Singapore, Singapore (Singapore). Dept. of Chemical and Environmental Engineering

1999-02-01

Control of neutralization processes is very difficult due to nonlinear dynamics, different types of disturbances and modeling errors. The objective of the paper is to evaluate two strategies (augmented internal model control, AuIMC and adaptive internal model control, AdIMC) for enhancing pH control by nonlinear internal model control (NIMC). A NIMC controller is derived directly form input output linearization. The AuIMC is composed of NIMC and an additional loop through which the difference between the process and model outputs is fed back and added to the input of the controller. For the AdIMC, and adaptive law with two tuning parameters is proposed for estimating the unknown parameter. Both AuIMC and AdIMC are extensively tested via simulation for pH neutralization. The theoretical and simulation results show that both the proposed strategies can reduce the effect of modeling errors and disturbances, and thereby enhance the performance of NIMC for pH processes. (author)

DISTRIBUTED CONTROL ARCHITECTURE OF AN OMNI-DIRECTIONAL AUTONOMOUS GUIDED VEHICLE

Directory of Open Access Journals (Sweden)

N.S. Tlale

2012-01-01

Full Text Available

ENGLISH ABSTRACT: Omni-directionality is the ability of a mobile robot to move instantaneously in any direction. This paper describes the wheel and controller designs of a Mecanumwheeled, autonomous guided vehicle (AGV for reconfigurable manufacturing systems. Mecanum wheels use slip developed between rollers and surface, surface and ground, to achieve omni-directionality. An advantage of omni-directional robotic platforms is that they are capable of performing tasks in congested environments such as those found in factory workshops, narrow aisles, warehouses, etc. Controller Area Network (CAN is implemented as a distributed controller to control motion and navigation tasks of the developed robot. The design of the distributed controller is described and its performance analyzed. This increases the reliability and functionality of the mobile robot.

AFRIKAANSE OPSOMMING: Die artikel beskryf wiel - en beheerontwerpe van ‘n veelrigting mobiele robot. Die robot is ‘n selfstandigbeheerde voertuig vir gebruik by vervaardigingstelsels met veranderbare konfigurasie. Die ontwerp van die robot en bypassende beheerstelsel word beskryf en ontleed teen die agterground van bewegings – en navigeertake. Die betroubaarheid en funksionering van die sisteem word beoordeel.

Commissioning of research reactors. Safety guide

International Nuclear Information System (INIS)

2006-01-01

The objective of this Safety Guide is to provide recommendations on meeting the requirements for the commissioning of research reactors on the basis of international best practices. Specifically, it provides recommendations on fulfilling the requirements established in paras 6.44 and 7.42-7.50 of International Atomic Energy Agency, Safety of Research Reactors, IAEA Safety Standards Series No. NS-R-4, IAEA, Vienna (2005) and guidance and specific and consequential recommendations relating to the recommendations presented in paras 615-621 of International Atomic Energy Agency, Safety in the Utilization and Modification of Research Reactors, Safety Series No. 35-G2, IAEA, Vienna (1994) and paras 228-229 of International Atomic Energy Agency, Safety Assessment of Research Reactors and Preparation of the Safety Analysis Report, Safety Series No. 35-G1, IAEA, Vienna (1994). This Safety Guide is intended for use by all organizations involved in commissioning for a research reactor, including the operating organization, the regulatory body and other organizations involved in the research reactor project

Effects of Internal Control Training on the Locus of Control of Some ...

African Journals Online (AJOL)

This study investigated the effect of internal control training on the locus of control of selected school going adolescents in Benin City. A sample size of 60 was drawn from two of the 27 co-educational schools in Oredo Local government area of Benin City. A table of random number technique was used to select subjects for ...

Summary: Update to ASTM guide E 1523 to charge control and charge referencing techniques in x-ray photoelectron spectroscopy

International Nuclear Information System (INIS)

Baer, D.R.

2005-01-01

An updated version of the American Society for Testing and Materials (ASTM) guide E 1523 to the methods to charge control and charge referencing techniques in x-ray photoelectron spectroscopy has been released by ASTM [Annual Book of ASTM Standards Surface Analysis (American Society for Testing and Materials, West Conshohocken, PA, 2004), Vol. 03.06]. The guide is meant to acquaint x-ray photoelectron spectroscopy (XPS) users with the various charge control and charge referencing techniques that are and have been used in the acquisition and interpretation of XPS data from surfaces of insulating specimens. The current guide has been expanded to include new references as well as recommendations for reporting information on charge control and charge referencing. The previous version of the document had been published in 1997 [D. R. Baer and K. D. Bomben, J. Vac. Sci. Technol. A 16, 754 (1998)

Inhibitory control in young children and its role in emerging internalization.

Science.gov (United States)

Kochanska, G; Murray, K; Jacques, T Y; Koenig, A L; Vandegeest, K A

1996-04-01

We examined inhibitory control as a quality of temperament that contributes to internalization. Children were assessed twice, at 26-41 months (N = 103) and at 43-56 months (N = 99), on repeated occasions, in multiple observational contexts and using parental reports. Comprehensive behavioral batteries incorporating multiple tasks were designed to measure inhibitory control at toddler and preschool age. They had good internal consistencies, corresponded with maternal ratings, and were developmentally sensitive. Individual children's performance was significantly correlated across both assessments, indicating stable individual differences. Girls surpassed boys at both ages. Children's internalization was observed while they were alone with prohibited objects, with a mundane chore, playing games that occasioned cheating, being induced to violate standards of conduct, and assessed using maternal reports. Inhibitory control was significantly associated with internalization, both contemporaneously and as a predictor in the longitudinal sense. The implications for considering children's temperament as a significant, yet often neglected contributor to developing internalization are discussed.

Transretroperitoneal CT-guided Embolization of Growing Internal Iliac Artery Aneurysm after Repair of Abdominal Aortic Aneurysm: A Transretroperitoneal Approach with Intramuscular Lidocaine Injection Technique

Energy Technology Data Exchange (ETDEWEB)

Park, Joon Young, E-mail: pjy1331@hanmail.net; Kim, Shin Jung, E-mail: witdd2@hanmail.net; Kim, Hyoung Ook, E-mail: chaos821209@hanmail.net [Chonnam National University Hospital, Department of Radiology (Korea, Republic of); Kim, Yong Tae, E-mail: mono-111@hanmail.net [Chonnam National University Hwasun Hospital, Department of Radiology (Korea, Republic of); Lim, Nam Yeol, E-mail: apleseed@hanmail.net; Kim, Jae Kyu, E-mail: kjkrad@jnu.ac.kr [Chonnam National University Hospital, Department of Radiology (Korea, Republic of); Chung, Sang Young, E-mail: sycpvts@jnu.ac.kr; Choi, Soo Jin Na, E-mail: choisjn@jnu.ac.kr; Lee, Ho Kyun, E-mail: mhaha@hanmail.net [Chonnam National University Hospital, Department of Surgery (Korea, Republic of)

2015-02-15

This study was designed to evaluate the efficacy and safety of CT-guided embolization of internal iliac artery aneurysm (IIAA) after repair of abdominal aortic aneurysm by transretroperitoneal approach using the lidocaine injection technique to iliacus muscle, making window for safe needle path for three patients for whom CT-guided embolization of IIAA was performed by transretroperitoneal approach with intramuscular lidocaine injection technique. Transretroperitoneal access to the IIAA was successful in all three patients. In all three patients, the IIAA was first embolized using microcoils. The aneurysmal sac was then embolized with glue and coils without complication. With a mean follow-up of 7 months, the volume of the IIAAs remained stable without residual endoleaks. Transretroperitoneal CT-guided embolization of IIAA using intramuscular lidocaine injection technique is effective, safe, and results in good outcome.

Evaluating Internal Model Strength and Performance of Myoelectric Prosthesis Control Strategies.

Science.gov (United States)

Shehata, Ahmed W; Scheme, Erik J; Sensinger, Jonathon W

2018-05-01

On-going developments in myoelectric prosthesis control have provided prosthesis users with an assortment of control strategies that vary in reliability and performance. Many studies have focused on improving performance by providing feedback to the user but have overlooked the effect of this feedback on internal model development, which is key to improve long-term performance. In this paper, the strength of internal models developed for two commonly used myoelectric control strategies: raw control with raw feedback (using a regression-based approach) and filtered control with filtered feedback (using a classifier-based approach), were evaluated using two psychometric measures: trial-by-trial adaptation and just-noticeable difference. The performance of both strategies was also evaluated using Schmidt's style target acquisition task. Results obtained from 24 able-bodied subjects showed that although filtered control with filtered feedback had better short-term performance in path efficiency ( ), raw control with raw feedback resulted in stronger internal model development ( ), which may lead to better long-term performance. Despite inherent noise in the control signals of the regression controller, these findings suggest that rich feedback associated with regression control may be used to improve human understanding of the myoelectric control system.

Internal Interdecadal Variability in CMIP5 Control Simulations

Science.gov (United States)

Cheung, A. H.; Mann, M. E.; Frankcombe, L. M.; England, M. H.; Steinman, B. A.; Miller, S. K.

2015-12-01

Here we make use of control simulations from the CMIP5 models to quantify the amplitude of the interdecadal internal variability component in Atlantic, Pacific, and Northern Hemisphere mean surface temperature. We compare against estimates derived from observations using a semi-empirical approach wherein the forced component as estimated using CMIP5 historical simulations is removed to yield an estimate of the residual, internal variability. While the observational estimates are largely consistent with those derived from the control simulations for both basins and the Northern Hemisphere, they lie in the upper range of the model distributions, suggesting the possibility of differences between the amplitudes of observed and modeled variability. We comment on some possible reasons for the disparity.

Regulatory Facility Guide for Tennessee

Energy Technology Data Exchange (ETDEWEB)

Anderson, S.S.; Bock, R.E.; Francis, M.W.; Gove, R.M.; Johnson, P.E.; Kovac, F.M.; Mynatt, J.O. [Oak Ridge National Lab., TN (United States); Rymer, A.C. [Transportation Consulting Services, Knoxville, TN (United States)

1994-02-28

This guide provides detailed compilations of international, federal, and state transportation related regulations applicable to shipments originating at or destined to Tennessee facilities. Information on preferred routes is also given.

Retrospective exposure assessment and quality control in an international multi-centre case-control study

DEFF Research Database (Denmark)

Tinnerberg, H; Heikkilä, P; Huici-Montagud, A

2003-01-01

The paper presents the exposure assessment method and quality control procedure used in an international, multi-centre case-control study within a joint Nordic and Italian cohort. This study was conducted to evaluate whether occupational exposure to carcinogens influenced the predictivity of high...... was higher among the original assessors (the assessor from the same country as the subject) than the average prevalence assessed by the other four in the quality control round. The original assessors classified more job situations as exposed than the others. Several reasons for this are plausible: real...... country-specific differences, differences in information available to the home assessor and the others and misunderstandings or difficulties in translation of information. To ensure the consistency of exposure assessments in international retrospective case-control studies it is important to have a well...

Standard guide for application of radiation monitors to the control and physical security of special nuclear material

CERN Document Server

American Society for Testing and Materials. Philadelphia

1999-01-01

1.1 This guide briefly describes the state-of-the-art of radiation monitors for detecting special nuclear material (SNM) (see 3.1.11) in order to establish the context in which to write performance standards for the monitors. This guide extracts information from technical documentation to provide information for selecting, calibrating, testing, and operating such radiation monitors when they are used for the control and protection of SNM. This guide offers an unobtrusive means of searching pedestrians, packages, and motor vehicles for concealed SNM as one part of a nuclear material control or security plan for nuclear materials. The radiation monitors can provide an efficient, sensitive, and reliable means of detecting the theft of small quantities of SNM while maintaining a low likelihood of nuisance alarms. 1.2 Dependable operation of SNM radiation monitors rests on selecting appropriate monitors for the task, operating them in a hospitable environment, and conducting an effective program to test, calibrat...

2013 International Conference on Mechatronics and Automatic Control Systems

CERN Document Server

2014-01-01

This book examines mechatronics and automatic control systems. The book covers important emerging topics in signal processing, control theory, sensors, mechanic manufacturing systems and automation. The book presents papers from the 2013 International Conference on Mechatronics and Automatic Control Systems held in Hangzhou, China on August 10-11, 2013. .

Theoretical grounds of internal audit in the system of state financial control in Ukraine

Directory of Open Access Journals (Sweden)

Dikan Larysa V.

2013-03-01

Full Text Available The article considers modern directions of reformation of the system of state financial control connected with introduction of the state internal financial control. It considers economic essence of the state internal financial control in the context of its components. It justifies the place of the internal audit in the system of the state internal financial control in Ukraine. It considers existing definitions of internal audit in legislative acts. It generalises views of scientists on interpretation of the “internal audit” notion. It provides definitions united in approaches. It conducts a critical analysis of generalised approaches. It offers the authors’ view on the essence of internal audit in budget institutions, which has certain positive features compared to existing ones.

Control of a Modular Multilevel Converter STATCOM under internal and external unbalances

DEFF Research Database (Denmark)

Tsolaridis, Georgios; Kontos, E.; Parikh, Harsh

2016-01-01

This paper develops a complete control scheme for the Modular Multilevel Converter (MMC) in a STATCOM application. The focus is laid on the internal balancing of the converter and its reliable operation under internal mismatches as well as under external unbalanced conditions. The leg energy...... and the simulation results verified the capability to provide maximum reactive power to the AC grid while maintaining internal balance through the individual control of each arm energy level....... controller ensures that the sum of the capacitor voltages of each phase are equal. An intuitive arm energy controller is also implemented which allows the decoupled control of the energy levels of every arm. The control performance of the STATCOM was evaluated under asymmetrical grid faults...

25 CFR 542.14 - What are the minimum internal control standards for the cage?

Science.gov (United States)

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false What are the minimum internal control standards for the... SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.14 What are the minimum internal control standards for... and/or procedures that provide at least the level of control described by the standards in this...

25 CFR 542.8 - What are the minimum internal control standards for pull tabs?

Science.gov (United States)

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false What are the minimum internal control standards for pull... SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.8 What are the minimum internal control standards for... and/or procedures that provide at least the level of control described by the standards in this...

Internal audit: the expert in providing comfort to the audit committee. The case of risk management and internal control

OpenAIRE

G. SARENS; I. DE BEELDE

2006-01-01

This study investigates to what extent audit committees feel uncomfortable about risk management and internal control, and focuses on how internal audit can be the expert in providing comfort in these areas, building upon the sociology of professions literature. Four case studies reveal that audit committees need comfort with respect to the control environment. Thanks to their internal position, their familiarity with the company, and their position close to people across the company, interna...

ORGANIZATIONAL SYSTEMS OF INTERNAL FINANCIAL CONTROL IN THE WORLD

Directory of Open Access Journals (Sweden)

Mihaela – Lavinia CIOBĂNICĂ

2014-04-01

Full Text Available Beyond the multitude of definitions, internal control is found in the centre of managerial concerns worldwide. This amplification of interest towards internal control has its origin in a series of events, of which two can be mentioned: the growing business complexity and dispersal activity centres, which led to the growth and development of the delegation of competence, the only way which enables the responsible to exercise powers from a distance and entirely, bringing together the components needed by its delegates. Regulatory domain, which has not ceased to expand: laws, regulations, rules, professional constraints, budgetary and social – all these have increasingly limited the decision makers, through a network of rules that must be respected. Consequently, what can be done to be safe from any punishment and to ensure constant watch over the essentials? To answer these questions, and many others, experts in the field have taken initiatives that have enabled them to define with precision the specific internal control and to set goals, creating the famous models: COSO and CoCo.

Pain and anxiety control: an online study guide.

Science.gov (United States)

2008-05-01

The Editorial Board of the Journal of Endodontics has developed a literature-based study guide of topical areas related to endodontics. This study guide is intended to give the reader a focused review of the essential endodontic literature and does not cite all possible articles related to each topic. Although citing all articles would be comprehensive, it would defeat the idea of a study guide. This section will cover pain theories and dentin hypersensitivity, referred pain, oral pain not of dental origin, barodontalgia, local anesthetics, long-acting local anesthetics, intrapulpal anesthesia, intraligamentary anesthesia, intraosseous anesthesia, inferior alveolar nerve block anesthesia, Gow-Gates anesthesia technique, Vazirani-Akinosi anesthesia technique, second-division block anesthesia technique, endodontic postoperative pain, effect of occlusal adjustment on endodontic pain, paresthesia associated with periradicular pathosis, analgesics, sedation, and endodontic flare-ups.

Cancer in Angola, resources and strategy for its control | Lopes | Pan ...

African Journals Online (AJOL)

According Angola epidemiological data, results of interviews and international published advocacy for cancer control we develop a potential strategy for its control. The objectives are to identify existing resources for cancer control and describe the needs thereto, in order to establish an oncological program to guide the ...

Control Modes in International Service Operations: The Propensity to Franchise

OpenAIRE

Karin Fladmoe-Lindquist; Laurent L. Jacque

1995-01-01

What determines a service firm's organizational choice between equity-based control and franchising? This question, which has elicited some theoretical answers and a few empirical tests in a domestic setting, has never been addressed in an international context before. This study explains the mode of control chosen in terms of a theoretical framework which borrows from agency theory and transaction cost analysis. The propensity to franchise internationally was found to be directly related to ...

Impact of Public Internal Financial Control on Public Administration in Croatia

Directory of Open Access Journals (Sweden)

Vesna VAŠIČEK

2010-04-01

Full Text Available The PIFC /Public Internal Financial Control/ was developed by the European Commission. PIFC is set of principles internal financial controls system established for the purpose of controlling, auditing, supervise on the use of national budget and European Union budget and funds. Also, in order to support candidate countries in their internal control system reforms in the public sector. Therefore, it is expected for the candidate countries to establish and develop the system of internal financial controls according to the concept which was in that field developed by the European Union based on International Standards and the best practice of European countries. Since the year 2003 the Republic of Croatia undertakes intensive activities on the establishment and development of the internal financial control system according with the regulation of European Union. In keeping with the set concept, the Republic of Croatia undertook numerous activities during the past six years to create all the necessary assumptions for the establishment and development of the system, including: the adoption of the initial strategic documents; drafting of laws; the creation of organisational capacities and human resources; and the implementation of the system with budget users at central government and local levels. In this paper we will present phases of implementation PIFC in Croatian Public Sector. Through this phases we will show impact that PIFC has on development of New Public Management in Croatia and changes in organizational structure and human resource that are caused during this process. Also, we will give critical opinion of that process and problems which occur during implementation. In this paper we will present approach in implementation of PIFC in Slovenia and Bosnia and Herzegovina and compare this with implementation in Croatia.

Occupational radiation protection. Safety guide

International Nuclear Information System (INIS)

2002-01-01

Occupational exposure to ionizing radiation can occur in a range of industries, medical institutions, educational and research establishments and nuclear fuel cycle facilities. Adequate radiation protection of workers is essential for the safe and acceptable use of radiation, radioactive materials and nuclear energy. In 1996, the Agency published Safety Fundamentals on Radiation Protection and the Safety of Radiation Sources (IAEA Safety Series No. 120) and International Basic Safety Standards for Protection against Ionizing, Radiation and for the Safety of Radiation Sources (IAEA Safety Series No. 115), both of which were jointly sponsored by the Food and Agriculture Organization of the United Nations, the IAEA, the International Labour Organisation, the OECD Nuclear Energy Agency, the Pan American Health Organization and the World Health Organization. These publications set out, respectively, the objectives and principles for radiation safety and the requirements to be met to apply the principles and to achieve the objectives. The establishment of safety requirements and guidance on occupational radiation protection is a major component of the support for radiation safety provided by the IAEA to its Member States. The objective of the IAEA's occupational protection programme is to promote an internationally harmonized approach to the optimization of occupational radiation protection, through the development and application of guidelines for restricting radiation exposures and applying current radiation protection techniques in the workplace. Guidance on meeting the requirements of the Basic Safety Standards for occupational protection is provided in three interrelated Safety Guides, one giving general guidance on the development of occupational radiation protection programmes and two giving more detailed guidance on the monitoring and assessment of workers' exposure due to external radiation sources and from intakes of radionuclides, respectively. These Safety

Occupational radiation protection. Safety guide

International Nuclear Information System (INIS)

2006-01-01

Occupational exposure to ionizing radiation can occur in a range of industries, medical institutions, educational and research establishments and nuclear fuel cycle facilities. Adequate radiation protection of workers is essential for the safe and acceptable use of radiation, radioactive materials and nuclear energy. In 1996, the Agency published Safety Fundamentals on Radiation Protection and the Safety of Radiation Sources (IAEA Safety Series No. 120) and International Basic Safety Standards for Protection against Ionizing, Radiation and for the Safety of Radiation Sources (IAEA Safety Series No. 115), both of which were jointly sponsored by the Food and Agriculture Organization of the United Nations, the IAEA, the International Labour Organisation, the OECD Nuclear Energy Agency, the Pan American Health Organization and the World Health Organization. These publications set out, respectively, the objectives and principles for radiation safety and the requirements to be met to apply the principles and to achieve the objectives. The establishment of safety requirements and guidance on occupational radiation protection is a major component of the support for radiation safety provided by the IAEA to its Member States. The objective of the IAEA's occupational protection programme is to promote an internationally harmonized approach to the optimization of occupational radiation protection, through the development and application of guidelines for restricting radiation exposures and applying current radiation protection techniques in the workplace. Guidance on meeting the requirements of the Basic Safety Standards for occupational protection is provided in three interrelated Safety Guides, one giving general guidance on the development of occupational radiation protection programmes and two giving more detailed guidance on the monitoring and assessment of workers' exposure due to external radiation sources and from intakes of radionuclides, respectively. These Safety

Occupational radiation protection. Safety guide

International Nuclear Information System (INIS)

1999-01-01

Occupational exposure to ionizing radiation can occur in a range of industries, medical institutions, educational and research establishments and nuclear fuel cycle facilities. Adequate radiation protection of workers is essential for the safe and acceptable use of radiation, radioactive materials and nuclear energy. In 1996, the Agency published Safety Fundamentals on Radiation Protection and the Safety of Radiation Sources (IAEA Safety Series No. 120) and International Basic Safety Standards for Protection against Ionizing, Radiation and for the Safety of Radiation Sources (IAEA Safety Series No. 115), both of which were jointly sponsored by the Food and Agriculture Organization of the United Nations, the IAEA, the International Labour Organisation, the OECD Nuclear Energy Agency, the Pan American Health Organization and the World Health Organization. These publications set out, respectively, the objectives and principles for radiation safety and the requirements to be met to apply the principles and to achieve the objectives. The establishment of safety requirements and guidance on occupational radiation protection is a major component of the support for radiation safety provided by the IAEA to its Member States. The objective of the IAEA's occupational protection programme is to promote an internationally harmonized approach to the optimization of occupational radiation protection, through the development and application of guidelines for restricting radiation exposures and applying current radiation protection techniques in the workplace. Guidance on meeting the requirements of the Basic Safety Standards for occupational protection is provided in three interrelated Safety Guides, one giving general guidance on the development of occupational radiation protection programmes and two giving more detailed guidance on the monitoring and assessment of workers' exposure due to external radiation sources and from intakes of radionuclides, respectively. These Safety

Occupational radiation protection. Safety guide

International Nuclear Information System (INIS)

2004-01-01

Occupational exposure to ionizing radiation can occur in a range of industries, medical institutions, educational and research establishments and nuclear fuel cycle facilities. Adequate radiation protection of workers is essential for the safe and acceptable use of radiation, radioactive materials and nuclear energy. In 1996, the Agency published Safety Fundamentals on Radiation Protection and the Safety of Radiation Sources (IAEA Safety Series No. 120) and International Basic Safety Standards for Protection against Ionizing, Radiation and for the Safety of Radiation Sources (IAEA Safety Series No. 115), both of which were jointly sponsored by the Food and Agriculture Organization of the United Nations, the IAEA, the International Labour Organisation, the OECD Nuclear Energy Agency, the Pan American Health Organization and the World Health Organization. These publications set out, respectively, the objectives and principles for radiation safety and the requirements to be met to apply the principles and to achieve the objectives. The establishment of safety requirements and guidance on occupational radiation protection is a major component of the support for radiation safety provided by the IAEA to its Member States. The objective of the IAEA's occupational protection programme is to promote an internationally harmonized approach to the optimization of occupational radiation protection, through the development and application of guidelines for restricting radiation exposures and applying current radiation protection techniques in the workplace. Guidance on meeting the requirements of the Basic Safety Standards for occupational protection is provided in three interrelated Safety Guides, one giving general guidance on the development of occupational radiation protection programmes and two giving more detailed guidance on the monitoring and assessment of workers' exposure due to external radiation sources and from intakes of radionuclides, respectively. These Safety

Internet-based guided self-help for posttraumatic stress disorder (PTSD): Randomized controlled trial.

Science.gov (United States)

Lewis, Catrin E; Farewell, Daniel; Groves, Vicky; Kitchiner, Neil J; Roberts, Neil P; Vick, Tracey; Bisson, Jonathan I

2017-06-01

There are numerous barriers that limit access to evidence-based treatment for posttraumatic stress disorder (PTSD). Internet-based guided self-help is a treatment option that may help widen access to effective intervention, but the approach has not been sufficiently explored for the treatment of PTSD. Forty two adults with DSM-5 PTSD of mild to moderate severity were randomly allocated to internet-based self-help with up to 3 h of therapist assistance, or to a delayed treatment control group. The internet-based program included eight modules that focused on psychoeducation, grounding, relaxation, behavioural activation, real-life and imaginal exposure, cognitive therapy, and relapse prevention. The primary outcome measure was reduction in clinician-rated traumatic stress symptoms using the clinician administered PTSD scale for DSM-V (CAPS-5). Secondary outcomes were self-reported PTSD symptoms, depression, anxiety, alcohol use, perceived social support, and functional impairment. Posttreatment, the internet-based guided self-help group had significantly lower clinician assessed PTSD symptoms than the delayed treatment control group (between-group effect size Cohen's d = 1.86). The difference was maintained at 1-month follow-up and dissipated once both groups had received treatment. Similar patterns of difference between the two groups were found for depression, anxiety, and functional impairment. The average contact with treating clinicians was 2½ h. Internet-based trauma-focused guided self-help for PTSD is a promising treatment option that requires far less therapist time than current first line face-to-face psychological therapy. © 2017 Wiley Periodicals, Inc.

Teaching International Economics and Trade--Concepts in International Relations

Science.gov (United States)

Starbird, Caroline; DeBoer, Dale; Pettit, Jenny

2004-01-01

The purpose of this book is to introduce students to real-life issues in international economics. The sections of the book are: (1) The Advantages of Trade; (2) Judging NAFTA; (3) Does Globalization Benefit Poor Countries?; (4) Pocket Guide to International Financial Institutions; (5) What Do You Know about the WTO?; (6) Free Trade and Shifting…

An Inverse Optimal Control Approach to Explain Human Arm Reaching Control Based on Multiple Internal Models.

Science.gov (United States)

Oguz, Ozgur S; Zhou, Zhehua; Glasauer, Stefan; Wollherr, Dirk

2018-04-03

Human motor control is highly efficient in generating accurate and appropriate motor behavior for a multitude of tasks. This paper examines how kinematic and dynamic properties of the musculoskeletal system are controlled to achieve such efficiency. Even though recent studies have shown that the human motor control relies on multiple models, how the central nervous system (CNS) controls this combination is not fully addressed. In this study, we utilize an Inverse Optimal Control (IOC) framework in order to find the combination of those internal models and how this combination changes for different reaching tasks. We conducted an experiment where participants executed a comprehensive set of free-space reaching motions. The results show that there is a trade-off between kinematics and dynamics based controllers depending on the reaching task. In addition, this trade-off depends on the initial and final arm configurations, which in turn affect the musculoskeletal load to be controlled. Given this insight, we further provide a discomfort metric to demonstrate its influence on the contribution of different inverse internal models. This formulation together with our analysis not only support the multiple internal models (MIMs) hypothesis but also suggest a hierarchical framework for the control of human reaching motions by the CNS.

Insurance industry guide

International Nuclear Information System (INIS)

Anon.

1992-01-01

This is an insurance industry guide for the independent power industry. The directory includes the insurance company's name, address, telephone and FAX numbers and a description of the company's area of expertise, products and services, and limitations. The directory is international in scope. Some of the companies specialize in independent power projects

17 CFR 240.17Ad-13 - Annual study and evaluation of internal accounting control.

Science.gov (United States)

2010-04-01

... internal accounting control. 240.17Ad-13 Section 240.17Ad-13 Commodity and Securities Exchanges SECURITIES... Company Rules § 240.17Ad-13 Annual study and evaluation of internal accounting control. (a) Accountant's... accountant concerning the transfer agent's system of internal accounting control and related procedures for...

A guide to innovation in informal settings | IDRC - International ...

International Development Research Centre (IDRC) Digital Library (Canada)

2012-11-06

Nov 6, 2012 ... Innovation in Informal Settings: A Research Agenda by Susan Cozzens and Judith Sutz presents a framework that can be used by researchers, ... will find this theoretical guide useful as it explores the five criteria of innovation: ...

Constitution of a centralised data base for the internal quality control in radiotherapy; Constitution d'une base de donnees centralisee pour le controle de qualite interne en radiotherapie

Energy Technology Data Exchange (ETDEWEB)

Fau, P.; Rodrigues, C.; Ruchaud, R.; Bravetti, J. [Centre Prive de Radiotherapie de Metz, 57 - Metz (France)

2009-10-15

The objective of this project was to implement a centralised data base of internal quality control in radiotherapy according to the criteria of the decree of A.f.s.s.a.p.s. (French agency of sanitary safety of health products on 27 july 2007, about the internal quality control of external radiotherapy facilities. The software on one year meets the objectives: compliance by comparison with A.f.s.s.a.p.s. criteria but particularly optimization of the centralisation and analysis of the internal quality controls. (N.C.)

Nuclear power plants - Instrumentation and control systems important for safety - Classification (International Electrotechnical Commission Standard Publication 1226:1993)

International Nuclear Information System (INIS)

Stefanik, J.

1996-01-01

This international standard established a method of classification of the information and command functions for nuclear power plants, and the I and C and equipment that provide those functions, into categories that designate the importance for safety of the functions, and the associated systems and equipment. The resulting classification then determines relevant design criteria. The design criteria are the measures of quality by which the adequacy of each functions, and the associated systems and equipment in relation to its importance to plant safety is ensured. In this standard, the criteria are those of functionality, reliability, performance, environmental durability and quality assurance. This standard is applicable to all the information and command functions, and the instrumentation and control systems and equipment that provide those functions. The functions, systems and equipment under consideration provide automated protection, closed or open loop control, and information to the operating staff. They keep the NPP conditions inside the safe operating envelope and provide automatic actions, or enable manual actions, that mitigate accidents or prevent or minimize radioactive releases to the site or wider environment. The functions, and the associated systems and equipment that fulfill these roles safeguard the health and safety of the NPP operators and the public. This standard complements, and does not replace or supersede, the Safety Guides and Codes of Practice published by the International Atomic Energy Agency

49 CFR 225.33 - Internal Control Plans.

Science.gov (United States)

2010-10-01

... official business. Each railroad shall amend its Internal Control Plan, as necessary, to reflect any..., incident, injury or illness will not be permitted or tolerated and will result in some stated disciplinary... paragraph (a)(1). Each railroad shall have procedures to process complaints from any person about the policy...

Detecting Internal Control Problems Based on COSO and Islamic Perspective: Case on SMEs

Directory of Open Access Journals (Sweden)

Yuniarti Hidayah Suyoso Putra

2014-03-01

Full Text Available Objective – The presence of Small Medium Enterprises (SMEs has been able to be livelihoods sources and absorb more labor, even though it has a relative smaller contribution of additional value compared to the Large-scale Enterprises. The number of economic actors of SMEs spread across area from urban to rural. However, SMEs have faced several serious problems. These problems are caused by the unique characteristics of SMEs itself. First, lack of managerial skills due to limited human resources and lack of monitoring which it is rarely conducted by the manager or the owner. Second, lack of information and technology to carry out operations. Both problems have great impacts in lack of internal controls. Third, SMEs also face problems in developing business scale, limited access to capital to the banks and financial institutions due to the lack of transparency. Therefore, this research aimed to detect to what extent of the problems arising in the application and assessment of internal controls performed by SMEs.Method – The research employs descriptive qualitative research method through direct observation, interview and business documentation owned by the company. Research materials are 29 SMEs consisting of 19 trading SMEs and 10 service SMEs. All SMEs are located in Malang city. Detection of application and assessment of internal controls in this study is based on the COSO framework and the Islamic perspective.Result – Internal control activities indicators apply the five principles of COSO framework which focused on three layers. First layer is self-assessment control area. Second layer is environment control area and the third layer is independent control area. While the Islamic perspective is focused on the internal control of business activities based on the Qur'an and Hadith. The results derive from application and assessment based on COSO framework and Islamic perspectives are complementary in improving the practice of internal

17 CFR 229.308T - (Item 308T) Internal control over financial reporting.

Science.gov (United States)

2010-04-01

... over financial reporting. 229.308T Section 229.308T Commodity and Securities Exchanges SECURITIES AND... § 229.308T (Item 308T) Internal control over financial reporting. Note to Item 308T: This is a special... internal control over financial reporting. Provide a report of management on the registrant's internal...

Government influence on international trade in uranium

International Nuclear Information System (INIS)

1978-01-01

The subject is dealt with in sections, entitled; introduction (history of uncertainty in the uranium market, opposition to nuclear power); unsatisfactory features of today's trade conditions (including discussion of restrictions in production, exports and imports); desirable principles governing international trade in uranium, apart from the non-proliferation issue (limitation on governmental intervention for economic purposes, reservation of adequate uranium resources in exporting countries, government export price control); desirable principles for achieving balance between security of supply and non-proliferation (need for consensus, reprocessing and fast breeder reactors, principles guiding government controls established for non-proliferation purposes). (U.K.)

INTERMARS: User-controlled international management system

Science.gov (United States)

Schmitt, Harrison H.

1986-01-01

Existing international space law as well as the best interest of all nations are consistent with the establishment of a user-based international organization, herein called INTERMARS. INTERMARS would provide access to facilities and services at a Martian base which would be of high functional potential, quality, safety, and reliability. These opportunities would be available on an open and nondiscriminatory basis to all peaceful users and investors. INTERMARS is a model organization concept tailored to provide cooperative international management of a Martian base for the benefit of its members, users, and investors. Most importantly, INTERMARS would provide such management through a sharing of both sovereignty and opportunity rather then unilateral control by any one nation or set of competing nations. Through an Assembly of Parties, a Board of Governors, a Board of Users and Investors, and a Director General, INTERMARS would meet its primary goal as it would be in the self-interest of all members, users, and investors to do so. The internal structure and philosophy of INTERMARS would provide not only for all participants to have representation in decisions affecting its activities, but also would insure effective and responsive management. Surely this is the precedent wished for, to establish for mankind at the now not-so-distant shores of the new ocean of space.

Construction of an internal amplification control for Mycobacterium ...

African Journals Online (AJOL)

Elham

2013-07-03

Jul 3, 2013 ... million and 10 bacteria and the most suitable internal control concentration for the mix was ... But the risk of contamination is unavoidable in normal ..... Contamination Management: Implication for Broad-Range Ribosomal.

Internal control in an EDI environment.

OpenAIRE

Bae, Dal Hyeoung

1991-01-01

Approved for public release; distribution in unlimited. Electronic Data Interchange(EDI) is the electronic transmission of standard business documents in machine-readable format between parent companies and respective trading partners. As the use of EDI has grown, there have been the associated risks due to an uncontrolled environment. Accordingly, the necessity for effective internal controls in an EDI environment is on the rise. This thesis evaluates and analyzes the feasi...

Auditor's Guide to IT Auditing

CERN Document Server

Cascarino, Richard E

2012-01-01

Step-by-step guide to successful implementation and control of IT systems—including the Cloud Many auditors are unfamiliar with the techniques they need to know to efficiently and effectively determine whether information systems are adequately protected. Now in a Second Edition, Auditor's Guide to IT Auditing presents an easy, practical guide for auditors that can be applied to all computing environments.Follows the approach used by the Information System Audit and Control Association's model curriculum, making this book a practical approach to IS auditingServes as an excellent study gu

Internal Capital Market Controls and Financial Performance in Multidivisional Firms.

OpenAIRE

Hill, Charles W L

1988-01-01

It is proposed that, within the population of M-form firms, the control systems necessary to realize economic benefits from interrelationships between subunits o f a firm are incompatible with the systems necessary to realize benef its from an M-form type internal capital market. This hypothesis is t ested on 156 large U.K. firms. Questionnaire data are used to classif y the firms according to their internal control characteristics. The findings provide tentative support for the hypothesis. C...

Consistent guiding center drift theories

International Nuclear Information System (INIS)

Wimmel, H.K.

1982-04-01

Various guiding-center drift theories are presented that are optimized in respect of consistency. They satisfy exact energy conservation theorems (in time-independent fields), Liouville's theorems, and appropriate power balance equations. A theoretical framework is given that allows direct and exact derivation of associated drift-kinetic equations from the respective guiding-center drift-orbit theories. These drift-kinetic equations are listed. Northrop's non-optimized theory is discussed for reference, and internal consistency relations of G.C. drift theories are presented. (orig.)

Internal and external force-based impedance control for cooperative manipulation

NARCIS (Netherlands)

Heck, D.J.F.; Kostic, D.; Denasi, A.; Nijmeijer, H.

2013-01-01

An asymptotically stable cascaded control algorithm is proposed for cooperative manipulation of a common object. This algorithm controls motion and internal forces of the object, as well as the contact forces between the object and environment. The motion of each manipulator is controlled using an

internal branding

OpenAIRE

Rai, Anu; Omanga, Josphat

2014-01-01

The project report provides an insight into internal branding of two different leading firms – Coca-Cola and Google. The aim of this project report is to study how these two companies use internal branding to promote or build brand performance of the company. This report follows a qualitative research method. The report is deductive in nature and hence, it is guided by the literatures of internal branding. The project report conducted research on brand identity, brand commitment and brand loy...

Internal branding

OpenAIRE

Rijal, Ramesh; Dhakal, Rajendra

2015-01-01

The project report provides an insight into internal branding of two different leading firms – Coca-Cola and Google. The aim of this project report is to study how these two companies use internal branding to promote or build brand performance of the company. This report follows a qualitative research method. The report is deductive in nature and hence, it is guided by the literatures of internal branding. The project report conducted research on brand identity, brand commitment and brand loy...

EVALUATING IMPLEMENTION OF GOVERNMENTAL PROVISION ON NO. 60 YEAR 2008 FOR GOVERNMENTAL INTERNAL CONTROL IN BOARD OF FINANCE AND DEVELOPMENT CONTROL OF SOUTH SULAWESI

OpenAIRE

Mediaty

2012-01-01

The purpose of this research is to evaluate Governmental Internal Control System in Board of Finance and Development Control of South Sulawesi. Governmental Internal Control System is a management control of government in achieving purpose of the state with the issuance of Governmental Provision No. 60 year 2008. List of Governmental Internal Control Test consists of five parts in accordance with the Internal Control System elements are: Control Environment, Risk Assessment, Control Activitie...

2nd International Conference on Mechatronics and Automatic Control

CERN Document Server

2015-01-01

This book examines mechatronics and automatic control systems. The book covers important emerging topics in signal processing, control theory, sensors, mechanic manufacturing systems and automation. The book presents papers from the second International Conference on Mechatronics and Automatic Control Systems held in Beijing, China on September 20-21, 2014. Examines how to improve productivity through the latest advanced technologies Covering new systems and techniques in the broad field of mechatronics and automatic control systems.

Risk-oriented internal control: The essence, management methods at small enterprises

OpenAIRE

Piskunov, V. A.; Manyayeva, V. A.; Tatarovskaya, T. E.; Bychkova, E. Y.

2016-01-01

The research topic relevance is inspired by necessity to develop theoretical and methodical provisions on the internal control system, risk-based management at small enterprises and to prove application feasibility, using economic-mathematical methods its implementation. The purpose of this research is to develop theoretical and methodical approaches to internal control system formation in small businesses, generating reliable and relevant information on the commercial organization activities...

25 CFR 542.11 - What are the minimum internal control standards for pari-mutuel wagering?

Science.gov (United States)

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false What are the minimum internal control standards for pari... INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.11 What are the minimum internal control... documentation and/or procedures that provide at least the level of control described by the standards in this...

Implementation of Intellectual Property Law on the International Space Station

Science.gov (United States)

Mannix, John G.

2002-01-01

Because of the importance of intellectual property rights to the private sector, NASA has developed a reference guide to assist business leaders in understanding how the Intellectual Property Articles of the 1998 Intergovernmental Agreement on the International Space Station will be implemented. This reference guide discusses the statutory, regulatory and programmatic strictures on the deployment, utilization and ownership of intellectual property within the Space Station program. This guide presents an analysis of the intellectual property law aspects of the international agreements and documents pertaining to the International Space Station, and then relates them to NASA's authorities for entering into research and development agreements with private entities. This paper will discuss the reference guide and should aid potential agreement participants in understanding the legal environment for entering into agreements with NASA to fly research and development payloads on the International Space Station.

Performance of an elliptically tapered neutron guide

International Nuclear Information System (INIS)

Muehlbauer, Sebastian; Stadlbauer, Martin; Boeni, Peter; Schanzer, Christan; Stahn, Jochen; Filges, Uwe

2006-01-01

Supermirror coated neutron guides are used at all modern neutron sources for transporting neutrons over large distances. In order to reduce the transmission losses due to multiple internal reflection of neutrons, ballistic neutron guides with linear tapering have been proposed and realized. However, these systems suffer from an inhomogeneous illumination of the sample. Moreover, the flux decreases significantly with increasing distance from the exit of the neutron guide. We propose using elliptically tapered guides that provide a more homogeneous phase space at the sample position as well as a focusing at the sample. Moreover, the design of the guide system is simplified because ellipses are simply defined by their long and short axes. In order to prove the concept we have manufactured a doubly focusing guide and investigated its properties with neutrons. The experiments show that the predicted gains using the program package McStas are realized. We discuss several applications of elliptic guides in various fields of neutron physics

Good practice guide to internal flexibility policies in companies

NARCIS (Netherlands)

Goudswaard, A.; Oeij, P.; Brugman, T.

2009-01-01

This report sets out to contribute to the present debate on the need for European companies and their workers to become more flexible and adaptable in the face of ongoing economic change and business restructuring. The guide should therefore provide useful and practical tips for company-level actors

Internal versus External Control of Reinforcement: A Review of the Locus of Control Construct

Science.gov (United States)

Kormanik, Martin B.; Rocco, Tonette S.

2009-01-01

One aspect of personality, perceptions of internal versus external control of reinforcement, shifts under conditions of change. This review of the literature examines the relationship between planned organizational change and locus of control. The review includes literature from the disciplines of clinical and social psychology, adult development,…

A newly developed technique of wireless remote controlled visual inspection system for neutron guides of cold neutron research facilities at HANARO

International Nuclear Information System (INIS)

Huh, Hyung; Cho, Yeong Garp; Kim, Jong In

2012-01-01

KAERI developed a neutron guide system for cold neutron research facilities at HANARO from 2003 to 2010. In 2008, the old plug shutter and instruments were removed, and a new plug and primary shutter were installed as the first cold neutron delivery system at HANARO. At the beginning of 2010, all the neutron guides and accessories had been successfully installed as well. The neutron guide system of HANARO consists of the in pile plug assembly with in pile guides, the primary shutter with in shutter guides, the neutron guides in the guide shielding room with secondary shutter, and the neutron guides in the neutron guide hall. Three kinds of glass materials were selected with optimum lengths by considering their lifetime, shielding, maintainability and cost as well. Radiation damage of the guides can occur on the coating and glass by neutron capturing in the glass. It is a big challenge to inspect a guide failure because of the difficult surrounding environment, such as high level radiation, limited working space, and massive hard work for removing and reinstalling the shielding blocks as shown in Fig 1. Therefore, KAERI has developed a wireless remote controlled visual inspection system for neutron guides using an infrared light camera mounted on the vehicle moving in the guide

Turbine Energy Evaluation by internal dimensional control

International Nuclear Information System (INIS)

Mediavilla, F.

2000-01-01

To maintain the optimum thermal performance in a high level throughout the life of the turbines requires a good testing program, proper analysis of the test data, and a steam path audit during turbine overhauls. If from operating data analysis collected during the performance test before the outage shows that the efficiency of the turbine is coming down, the steam path audit, that is an internal inspection and a dimensional control of the internals, identity and quantity causes of performance degradation like, seal leakages, excessive clearances, solid particle erosion damages, blades deposits and other losses. The steam path audit assigns the heat rate penalties associated with each of these individual losses to the total degradation. This are used to make cost-effective maintenance decisions during the course of the overhaul. After repairs, a closing steam path audit is conducted during the re assembly of the turbine in order to predict return to service condition of the machine and to provide a quality control check on outage repairs. (Author)

The Local Agenda 21 Planning Guide: An Introduction to ...

International Development Research Centre (IDRC) Digital Library (Canada)

The Local Agenda 21 Planning Guide is an introductory guide on the planning elements, methods, and tools being used by local governments to implement Agenda ... International Water Resources Association, in close collaboration with IDRC, is holding a webinar titled “Climate change and adaptive water management: ...

Drafting Lab Management Guide.

Science.gov (United States)

Ohio State Univ., Columbus. Instructional Materials Lab.

This manual was developed to guide drafting instructors and vocational supervisors in sequencing laboratory instruction and controlling the flow of work for a 2-year machine trades training program. The first part of the guide provides information on program management (program description, safety concerns, academic issues, implementation…

Hanford Internal Dosimetry Project manual. Revision 1

International Nuclear Information System (INIS)

Carbaugh, E.H.; Bihl, D.E.; MacLellan, J.A.; Long, M.P.

1994-07-01

This document describes the Hanford Internal Dosimetry Project, as it is administered by Pacific Northwest Laboratory (PNL) in support of the US Department of Energy and its Hanford contractors. Project services include administrating the bioassay monitoring program, evaluating and documenting assessment of potential intakes and internal dose, ensuring that analytical laboratories conform to requirements, selecting and applying appropriate models and procedures for evaluating radionuclide deposition and the resulting dose, and technically guiding and supporting Hanford contractors in matters regarding internal dosimetry. Specific chapters deal with the following subjects: practices of the project, including interpretation of applicable DOE Orders, regulations, and guidance into criteria for assessment, documentation, and reporting of doses; assessment of internal dose, including summary explanations of when and how assessments are performed; recording and reporting practices for internal dose; selection of workers for bioassay monitoring and establishment of type and frequency of bioassay measurements; capability and scheduling of bioassay monitoring services; recommended dosimetry response to potential internal exposure incidents; quality control and quality assurance provisions of the program

Hanford Internal Dosimetry Project manual. Revision 1

Energy Technology Data Exchange (ETDEWEB)

Carbaugh, E.H.; Bihl, D.E.; MacLellan, J.A.; Long, M.P.

1994-07-01

This document describes the Hanford Internal Dosimetry Project, as it is administered by Pacific Northwest Laboratory (PNL) in support of the US Department of Energy and its Hanford contractors. Project services include administrating the bioassay monitoring program, evaluating and documenting assessment of potential intakes and internal dose, ensuring that analytical laboratories conform to requirements, selecting and applying appropriate models and procedures for evaluating radionuclide deposition and the resulting dose, and technically guiding and supporting Hanford contractors in matters regarding internal dosimetry. Specific chapters deal with the following subjects: practices of the project, including interpretation of applicable DOE Orders, regulations, and guidance into criteria for assessment, documentation, and reporting of doses; assessment of internal dose, including summary explanations of when and how assessments are performed; recording and reporting practices for internal dose; selection of workers for bioassay monitoring and establishment of type and frequency of bioassay measurements; capability and scheduling of bioassay monitoring services; recommended dosimetry response to potential internal exposure incidents; quality control and quality assurance provisions of the program.

El Control y la Confianza: dos rivales en las "International Joint Ventures"

Directory of Open Access Journals (Sweden)

Francisco Puig Blanco

2013-02-01

Full Text Available Las empresas conjuntas internacionales(International Joint Ventures se caracterizan pordos factores íntimamente relacionados: el control y eloportunismo. En este trabajo, trataremos de analizarla relación entre ambos factores y estudiaremos quétipos de control ayudarían a prevenir o a reducirel oportunismo en este tipo de empresas. Además,trataremos de identificar las ventajas e inconvenientesasociados al control y analizaremos el caso de unaInternational Joint Venture formada por dos empresas,una española y la otra americana, cuyo fracaso se debió,en gran parte, a la ausencia de control (confianza y aloportunismo.   ABSTRACT International Joint Ventures are distinguished bytwo closely related factors: control and opportunism.In this paper we will try to analyze the relationshipbetween both factors and we will study what controlswould help prevent or reduce opportunism in thisclass of enterprises. Besides, we will attempt to identifythe advantages and inconveniences associated withcontrol, and analyze one case of an International JointVenture comprised by two companies, a Spanish and anAmerican one whose failure was largely due to lack ofcontrol (trust and opportunism.

The Information Support of the Internal Control of Receivables and Accounts Payable

Directory of Open Access Journals (Sweden)

Akimova Natalia S.

2017-11-01

Full Text Available The article substantiates the necessity of organization of internal audit of receivables and accounts payable at the trade enterprises, which will allow the decision-makers to obtain confirmation of the validity of the accountance data. The theoretical substantiation of bases of monitoring together with necessity of its carrying out in the accountance system of accounts receivable and accounts payable was considered. The scheme on interaction of subjects of control has been proposed, in terms of which each of the examined subjects of control is in constant information interaction with other divisions. To effectively control the movement of debt, trade organizations are encouraged to use the forms of operational reporting developed as part of improving internal audit as a tool to enhance the efficiency of the internal control system.

Optimal closed-loop identification test design for internal model control

NARCIS (Netherlands)

Zhu, Y.; Bosch, van den P.P.J.

2000-01-01

In this work, optimal closed-loop test design for control is studied. Simple design formulas are derived based on the asymptotic theory of Ljung. The control scheme used is internal model control (IMC) and the design constraint is the power of the process output or that of the reference signal. The

PRIVILEGES AND IMMUNITIES IN SWITZERLAND - PRACTICAL GUIDE

CERN Multimedia

Relations with the Host States Service

2002-01-01

The Permanent Mission of Switzerland to the International Organisations in Geneva has just published a practical guide to the implementation of the system of privileges and immunities and other facilities on its Web site. The guide is currently available in French only but an English translation is in preparation. Comprising around ten chapters, each dealing with a different subject (insurance, real estate, customs, etc.), the guide is not exhaustive but will be regularly supplemented, expanded and updated. The Mission specifies that the information contained in the document is given only as guide and that it implies no legal commitment on the part of the Host State. Relations with the Host States Service Tel. 72848

The IAEA's activities in safeguarding nuclear materials and in developing internationally acceptable safety codes and guides for nuclear power plants

International Nuclear Information System (INIS)

Rometsch, Rudolf; Specter, Herschel

1977-01-01

Promoting the peaceful use of nuclear energy and aiming at the international sharing of its benefits are objectives that guide the activities of the Agency. But this promotional work is carried out on condition that security and safety are provided for. All Agency assistance involving nuclear facilities will be subjected to standards of safety or other standards, which are proposed by a State the Agency finds essentially equivalent. Safeguards are always applied on the basis of agreement. States party to NPT are obligated to negotiate and conclude with the Agency agreements which cover all their peaceful nuclear activities. Safeguards agreements concluded outside NPT are applied to specific supplies of facilities, equipment and material. To assist countries in laying down their nuclear safety regulations the Agency's program for the developing of codesof practice and safety guides for nuclear power plants draws up guidelines for governmental organizations, siting, design, operation and quality assurance. Codes are the fundamental documents laying down the objectives of each field of nuclear safety

DOE assessment guide for safeguards and security

International Nuclear Information System (INIS)

Bennett, C.A.; Christorpherson, W.E.; Clark, R.J.; Martin, F.; Hodges, Jr.

1978-04-01

DOE operations are periodically assessed to assure that special nuclear material, restricted data, and other classified information and DOE facilities are executed toward continuing the effectiveness of the International Atomic Energy Agency safeguards. A guide to describe the philosophy and mechanisms through which these assessments are conducted is presented. The assessment program is concerned with all contractor, field office, and Headquarters activities which are designed to assure that safeguards and security objectives are reached by contractors at DOE facilities and operations. The guide takes into account the interlocking relationship between many of the elements of an effective safeguards and security program. Personnel clearance programs are a part of protecting classified information as well as nuclear materials. Barriers that prevent or limit access may contribute to preventing theft of government property as well as protecting against sabotage. Procedures for control and surveillance need to be integrated with both information systems and procedures for mass balance accounting. Wherever possible, assessment procedures have been designed to perform integrated inspection, evaluation, and follow-up for the safeguards and security program

Methods of internal control in integrated management accounting system of the enterprise

Directory of Open Access Journals (Sweden)

Shevelev A.E.

2017-01-01

Full Text Available The purpose of internal control procedure of material and information flows is expression of independent opinion about accounting of material and information flows of the organization, development of recommendations about elimination of detected violations and preparing data to implement automated management accounting system, based on integrated system. Internal control procedure of material and information flows in the enterprise can solve complex of problems about identifying deficiencies in accounting, searching for reserves using information resources, identifying opportunities for implementation of automated management accounting system at the enterprise. Internal control was planned and conducted thus to argue that management statements are free of misstatement, and information flows provide required operability of the entire system. Internal control was carried out on a sample basis and included examining, on a test basis evidence supporting the amounts and disclosures in management reports. The disclosure of information about innovative activities, assessment of compliance with the principles and rules of accounting used in the preparation of management reporting, the review of key performance indicators, as well as evaluating the presentation of management reports are presented.

Constitution of a centralised data base for the internal quality control in radiotherapy

International Nuclear Information System (INIS)

Fau, P.; Rodrigues, C.; Ruchaud, R.; Bravetti, J.

2009-01-01

The objective of this project was to implement a centralised data base of internal quality control in radiotherapy according to the criteria of the decree of A.f.s.s.a.p.s. (French agency of sanitary safety of health products on 27 july 2007, about the internal quality control of external radiotherapy facilities. The software on one year meets the objectives: compliance by comparison with A.f.s.s.a.p.s. criteria but particularly optimization of the centralisation and analysis of the internal quality controls. (N.C.)

Reduce Fraud Risk in Your District with Stronger Internal Controls

Science.gov (United States)

Okrzesik, Daryl J.; Nuehring, Bert G.

2011-01-01

Internal accounts offer schools a faster, more convenient way to handle the income and expenses that result from student fees, school clubs and organizations, field trips, fund-raising, and similar activities. But this convenience also incurs the added risk of fraud. Fortunately, there are proven ways to strengthen internal controls and reduce…

Spinal motor control system incorporates an internal model of limb dynamics.

Science.gov (United States)

Shimansky, Y P

2000-10-01

The existence and utilization of an internal representation of the controlled object is one of the most important features of the functioning of neural motor control systems. This study demonstrates that this property already exists at the level of the spinal motor control system (SMCS), which is capable of generating motor patterns for reflex rhythmic movements, such as locomotion and scratching, without the aid of the peripheral afferent feedback, but substantially modifies the generated activity in response to peripheral afferent stimuli. The SMCS is presented as an optimal control system whose optimality requires that it incorporate an internal model (IM) of the controlled object's dynamics. A novel functional mechanism for the integration of peripheral sensory signals with the corresponding predictive output from the IM, the summation of information precision (SIP) is proposed. In contrast to other models in which the correction of the internal representation of the controlled object's state is based on the calculation of a mismatch between the internal and external information sources, the SIP mechanism merges the information from these sources in order to optimize the precision of the controlled object's state estimate. It is demonstrated, based on scratching in decerebrate cats as an example of the spinal control of goal-directed movements, that the results of computer modeling agree with the experimental observations related to the SMCS's reactions to phasic and tonic peripheral afferent stimuli. It is also shown that the functional requirements imposed by the mathematical model of the SMCS comply with the current knowledge about the related properties of spinal neuronal circuitry. The crucial role of the spinal presynaptic inhibition mechanism in the neuronal implementation of SIP is elucidated. Important differences between the IM and a state predictor employed for compensating for a neural reflex time delay are discussed.

United Nations International Drug Control Programme responds

Directory of Open Access Journals (Sweden)

Michael Platzer

2002-01-01

Full Text Available [First paragraph] We would like to reply to the article written by Axel Klein entitled, "Between the Death Penalty and Decriminalization: New Directions for Drug Control in the Commonwealth Caribbean" published in NWIG 75 (3&4 2001. We have noted a number of factual inaccuracies as well as hostile comments which portray the United Nations International Drug Control Programme in a negative light. This reply is not intended to be a critique of the article, which we find unbalanced and polemical, but rather an alert to the tendentious statements about UNDCP, which we feel should be corrected.

ICG: a wiki-driven knowledgebase of internal control genes for RT-qPCR normalization.

Science.gov (United States)

Sang, Jian; Wang, Zhennan; Li, Man; Cao, Jiabao; Niu, Guangyi; Xia, Lin; Zou, Dong; Wang, Fan; Xu, Xingjian; Han, Xiaojiao; Fan, Jinqi; Yang, Ye; Zuo, Wanzhu; Zhang, Yang; Zhao, Wenming; Bao, Yiming; Xiao, Jingfa; Hu, Songnian; Hao, Lili; Zhang, Zhang

2018-01-04

Real-time quantitative PCR (RT-qPCR) has become a widely used method for accurate expression profiling of targeted mRNA and ncRNA. Selection of appropriate internal control genes for RT-qPCR normalization is an elementary prerequisite for reliable expression measurement. Here, we present ICG (http://icg.big.ac.cn), a wiki-driven knowledgebase for community curation of experimentally validated internal control genes as well as their associated experimental conditions. Unlike extant related databases that focus on qPCR primers in model organisms (mainly human and mouse), ICG features harnessing collective intelligence in community integration of internal control genes for a variety of species. Specifically, it integrates a comprehensive collection of more than 750 internal control genes for 73 animals, 115 plants, 12 fungi and 9 bacteria, and incorporates detailed information on recommended application scenarios corresponding to specific experimental conditions, which, collectively, are of great help for researchers to adopt appropriate internal control genes for their own experiments. Taken together, ICG serves as a publicly editable and open-content encyclopaedia of internal control genes and accordingly bears broad utility for reliable RT-qPCR normalization and gene expression characterization in both model and non-model organisms. © The Author(s) 2017. Published by Oxford University Press on behalf of Nucleic Acids Research.

A Control of Collision and Deadlock Avoidance for Automated Guided Vehicles with a Fault-Tolerance Capability

Directory of Open Access Journals (Sweden)

Qin Li

2016-04-01

Full Text Available Based on a novel discrete-event zone-control model, in our previous papers [1, 2], we presented a time-efficient traffic control for automated guided vehicle (AGV systems to exclude inter-vehicle collisions and system deadlocks, together with a case study on container terminals. The traffic control allows each vehicle in an AGV system to freely choose its routes for any finite sequence of zone-to-zone transportation tasks and the routes can be constructed in an online fashion. In this paper, we extended our previous results with two practical goals: (1 to increase the utilization of the workspace area by reducing the minimally allowed area of each zone; (2 to avoid vehicle collisions and deadlocks with the occurrence of vehicle breakdowns. To achieve the first goal, we include one extra vehicle event that allows each vehicle to probe further ahead while it is moving on the guide-path. This leads to an extension of our previous discrete-event model and traffic control rules, which are presented in the first part of the paper. The second part of the paper concerns the second goal, for which an emergency traffic control scheme is designed as supplementary to the normal traffic control rules. As in our previous papers, the improved model and traffic control are applied to a simulation of quayside container transshipment at container terminals; our simulation results are compared with those from two interesting works in the literature.

Indicator based controlling of cantonal guiding planning in Switzerland: A model for more efficient sustainable planning instruments at the regional level

Directory of Open Access Journals (Sweden)

Keiner Marco

2003-01-01

Full Text Available In the actual Swiss cantonal planning practice every 10 years in general, there is a review of the guiding plan. The plan’s evaluation typically takes place shortly before the revision process. In the interstitial time, the guiding plan’s effectiveness can only be anticipated. In the review, a survey of both, the desired and unwanted spatial effects are often absent. As a result, a thorough analysis of the effects and the direction of the spatial development cannot be accomplished. A spatial plan that is geared to the principle of sustainability needs the outputs of such an analysis. Development assessments are required to verify the plans’ effects, well-defined goals to assist in rectifying deviations, key indicators to identify efficiency potentials, and precautionary measures to allow for an adaptable and responsive planning methodology. The instruments, which might assist in the cantonal guiding plan objectives implementation, do exist. Such instruments are monitoring, controlling and benchmarking (with the support of indicators. These tools can assist in ensuring the plan’s overall value and the effectiveness and appropriateness of the ensuing development. By using these tools and a sound planning methodology, unsustainable spatial development can be tracked early and rectified with appropriated measures. The control as this system’s central instrument is presented here and its application opportunities in the cantonal guiding planning are discussed. In order to achieve a sustainable spatial development and a more dynamic guiding planning, the application of control and benchmarking is crucial.

Teaching Guide on International Terrorism: Definitions, Causes, and Responses.

Science.gov (United States)

United States Inst. of Peace, Washington, DC.

Dealing with terrorism has become the centerpiece of United States foreign policy today. Yet terrorism--its definition, causes, and methods of dealing with it--has rarely been dealt with in high school courses. The United States Institute of Peace has developed this 3-lesson plan (for 45-minute class periods) teaching guide, aimed at grades 11 and…

78 FR 37570 - Certain Products Containing Interactive Program Guide and Parental Control Technology; Notice of...

Science.gov (United States)

2013-06-21

... Interactive Program Guide and Parental Control Technology; Notice of Request for Statements on the Public... questions regarding filing should contact the Secretary (202-205-2000). Any person desiring to submit a... taken under the authority of section 337 of the Tariff Act of 1930, as amended (19 U.S.C. 1337), and of...

Integrated navigation and control software system for MRI-guided robotic prostate interventions.

Science.gov (United States)

Tokuda, Junichi; Fischer, Gregory S; DiMaio, Simon P; Gobbi, David G; Csoma, Csaba; Mewes, Philip W; Fichtinger, Gabor; Tempany, Clare M; Hata, Nobuhiko

2010-01-01

A software system to provide intuitive navigation for MRI-guided robotic transperineal prostate therapy is presented. In the system, the robot control unit, the MRI scanner, and the open-source navigation software are connected together via Ethernet to exchange commands, coordinates, and images using an open network communication protocol, OpenIGTLink. The system has six states called "workphases" that provide the necessary synchronization of all components during each stage of the clinical workflow, and the user interface guides the operator linearly through these workphases. On top of this framework, the software provides the following features for needle guidance: interactive target planning; 3D image visualization with current needle position; treatment monitoring through real-time MR images of needle trajectories in the prostate. These features are supported by calibration of robot and image coordinates by fiducial-based registration. Performance tests show that the registration error of the system was 2.6mm within the prostate volume. Registered real-time 2D images were displayed 1.97 s after the image location is specified. Copyright 2009 Elsevier Ltd. All rights reserved.

Integrated navigation and control software system for MRI-guided robotic prostate interventions

Science.gov (United States)

Tokuda, Junichi; Fischer, Gregory S.; DiMaio, Simon P.; Gobbi, David G.; Csoma, Csaba; Mewes, Philip W.; Fichtinger, Gabor; Tempany, Clare M.; Hata, Nobuhiko

2010-01-01

A software system to provide intuitive navigation for MRI-guided robotic transperineal prostate therapy is presented. In the system, the robot control unit, the MRI scanner, and the open-source navigation software are connected together via Ethernet to exchange commands, coordinates, and images using an open network communication protocol, OpenIGTLink. The system has six states called “workphases” that provide the necessary synchronization of all components during each stage of the clinical workflow, and the user interface guides the operator linearly through these workphases. On top of this framework, the software provides the following features for needle guidance: interactive target planning; 3D image visualization with current needle position; treatment monitoring through real-time MR images of needle trajectories in the prostate. These features are supported by calibration of robot and image coordinates by fiducial-based registration. Performance tests show that the registration error of the system was 2.6 mm within the prostate volume. Registered real-time 2D images were displayed 1.97 s after the image location is specified. PMID:19699057

PERFORMANCE IN INTERNAL CONTROL AND RISK MANAGEMENT

Directory of Open Access Journals (Sweden)

JELER (POPA IOANA

2017-06-01

Full Text Available The purpose of this article is to highlight the importance of internal control and risk management. In practice, economic entities meet a variety of risks that have the origins from the internal environment or the external one. Although there are different of views on addressing the concept of risk - threats or opportunities, event or action, accordingly uncertain, proposed by specialists in risk management in this article we try to present these issues and identify techniques to counter risks occurrence. In this article we present also means managing risk and why needs to be implemented at institutional level a risk management. The paper concludes by highlight the role of efficient risk management in the company’s management and company's activities.

Disturbance Observer based internal Model Controller Design: Applications to Tracking Control of Optical Disk Drive

Energy Technology Data Exchange (ETDEWEB)

Choi, Hyun Taek; Suh, Il Hong [Hanyang University (Korea, Republic of)

1999-02-01

A digital tracking controller is proposed for a precise positioning control under a large repetitive and/or non repetitive disturbances. The proposed controller consists of the internal model controller and the disturbance observer to eliminate the modeling uncertainty. A sufficient condition is given for robust stability of the proposed control system. Numerical Examples are illustrated for a precise head positioning of optical disk drives regardless of a torque disturbance and/or output disturbance. (author). 8 refs., 19 figs.

Hanford internal dosimetry program manual

International Nuclear Information System (INIS)

Carbaugh, E.H.; Sula, M.J.; Bihl, D.E.; Aldridge, T.L.

1989-10-01

This document describes the Hanford Internal Dosimetry program. Program Services include administrating the bioassay monitoring program, evaluating and documenting assessments of internal exposure and dose, ensuring that analytical laboratories conform to requirements, selecting and applying appropriate models and procedures for evaluating internal radionuclide deposition and the resulting dose, and technically guiding and supporting Hanford contractors in matters regarding internal dosimetry. 13 refs., 16 figs., 42 tabs

Anatomical characteristics of the styloid process in internal carotid artery dissection: Case-control study.

Science.gov (United States)

Amorim, José M; Pereira, Daniela; Rodrigues, Marta G; Beato-Coelho, José; Lopes, Margarida; Cunha, André; Figueiredo, Sofia; Mendes-Pinto, Mafalda; Ferreira, Carla; Sargento-Freitas, João; Castro, Sérgio; Pinho, João

2018-06-01

Introduction Pathophysiology of cervical artery dissection is complex and poorly understood. In addition to well-known causative and predisposing factors, including major trauma and monogenic connective tissue disorders, morphological characteristics of the styloid process have been recently recognized as a possible risk factor for cervical internal carotid artery dissection. Aims To study the association of the anatomical characteristics of styloid process with internal carotid artery dissection. Methods Retrospective, multicenter, case-control study of patients with internal carotid artery dissection and age- and sex-matched controls. Consecutive patients with internal carotid artery dissection and controls with ischemic stroke or transient ischemic attack of any etiology excluding internal carotid artery dissection, who had performed computed tomography angiography, diagnosed between January 2010 and September 2016. Two independent observers measured styloid process length and styloid process distance to internal carotid artery. Results Sixty-two patients with internal carotid artery dissection and 70 controls were included. Interobserver agreement was good for styloid process length and styloid process-internal carotid artery distance (interclass correlation coefficient = 0.89 and 0.76, respectively). Styloid process ipsilateral to dissection was longer than left and right styloid process in controls (35.8 ± 14.4 mm versus 30.4 ± 8.9 mm and 30.3 ± 8.2 mm, p = 0.011 and p = 0.008, respectively). Styloid process-internal carotid artery distance ipsilateral to dissection was shorter than left and right distance in controls (6.3 ± 1.9 mm versus 7.2 ± 2.1 mm and 7.0 ± 2.3 mm, p = 0.003 and p = 0.026, respectively). Internal carotid artery dissection was associated with styloid process length (odds ratio = 1.04 mm -1 , 95% confidence interval = 1.01-1.08, p = 0.015) and styloid process-internal

Sensor Characteristics Reference Guide

Energy Technology Data Exchange (ETDEWEB)

Cree, Johnathan V.; Dansu, A.; Fuhr, P.; Lanzisera, Steven M.; McIntyre, T.; Muehleisen, Ralph T.; Starke, M.; Banerjee, Pranab; Kuruganti, T.; Castello, C.

2013-04-01

The Buildings Technologies Office (BTO), within the U.S. Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), is initiating a new program in Sensor and Controls. The vision of this program is: • Buildings operating automatically and continuously at peak energy efficiency over their lifetimes and interoperating effectively with the electric power grid. • Buildings that are self-configuring, self-commissioning, self-learning, self-diagnosing, self-healing, and self-transacting to enable continuous peak performance. • Lower overall building operating costs and higher asset valuation. The overarching goal is to capture 30% energy savings by enhanced management of energy consuming assets and systems through development of cost-effective sensors and controls. One step in achieving this vision is the publication of this Sensor Characteristics Reference Guide. The purpose of the guide is to inform building owners and operators of the current status, capabilities, and limitations of sensor technologies. It is hoped that this guide will aid in the design and procurement process and result in successful implementation of building sensor and control systems. DOE will also use this guide to identify research priorities, develop future specifications for potential market adoption, and provide market clarity through unbiased information

25 CFR 23.46 - Financial management, internal and external controls and other assurances.

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Financial management, internal and external controls and....46 Financial management, internal and external controls and other assurances. Grantee financial... required by the grantee's financial management system. The Secretary or his/her designee may review the...

IMPROVEMENT OF THE METHODS OF INTERNAL CONTROL OF INVENTORIES IN AGRICULTURAL ORGANIZATIONS

OpenAIRE

Afanasenko A. N.

2013-01-01

The article considers the necessity of inventories for any organization. The fate of the organization depends on its management effectiveness and its financial position. The organizational peculiarities of internal control in the agricultural sphere have been studied and the ways of improvement of the organizational and methodological mechanisms have been offered for the internal control of inventories in agricultural organizations

International systems for harmonization and quality control by in vivo monitoring and quality control by in vivo monitoring of internal contamination

Energy Technology Data Exchange (ETDEWEB)

Malatova, I [National Radiation Protection Inst., Prague (Czech Republic)

1996-12-31

After the Chernobyl accident, whole body counting for the monitoring of internal contamination of the population was widely used. In many cases, great discrepancy occurred between in vivo measured values and predicted ones from model calculations. This situation was very similar to the situation in environmental monitoring, however, by sample measurement, quality assurance and quality control of the measurement procedure is much easier than by whole body counting. In addition to it, unlike in environmental monitoring, use of semiconductor detectors by whole counting was rather limited in this time so there were few laboratories which were able to distinguish up to 20 radionuclides by which people from the vicinity of Chernobyl were internally contaminated. Therefore, effort was undertaken by many international organization to summarize current status of whole body counting and to estimate uncertainty and sensitivity of different devices. In this paper efforts to harmonize an interpretation of measured results is given. Whole body counting laboratory of the National Radiation Protection Institute (NRPI) in Prague participates in the above mentioned intercomparisons with good results and scientists from NRPI have participated in the preparation of 3 international recommendations concerning measurement of internal contamination (author).

INTERDEPENDENCIES OF THE INTERNAL / MANAGERIAL CONTROL STANDARD NO. 6 - ORGANIZATIONAL STRUCTURE

Directory of Open Access Journals (Sweden)

Ionut-Cosmin BĂLOI

2015-06-01

Full Text Available Our initiative of analyzing the internal control standard which deals with the organizational structure comes from the observations on the significance of these essential aspects of modern management and on the sensitivity with which this standard is treated in most of the public institutions considered representative for the Oltenia region. Although the administrators of public institutions strive to optimize the systems of internal/managerial control, they frequently face many issues concerning the misunderstanding of these standards, vaguely explained, for example throughout some guidelines or other documents. The hypothesis of our study is that most of public institutions face gaps in understanding, interpreting, adapting and implementing an effective model of organizational structure, and the causes are due to the lack of an interdependent, correlated approach of the pillars that support the internal/managerial control system: the 25 standards required by the Romanian legislation. Our study critically describes the superficial approach founded in the self-evaluation reports of the public institutions, if we refer only to the conformity of the organizational structure and the four standards that we consider inextricably related with this internal/managerial control standard. From the methodological point of view, our study tests the correlation between the level of compliance of these standards and the functionality of the system composed by them in the public organizations that we have investigated.

Outcomes of microscope-integrated intraoperative optical coherence tomography-guided center-sparing internal limiting membrane peeling for myopic traction maculopathy: a novel technique.

Science.gov (United States)

Kumar, Atul; Ravani, Raghav; Mehta, Aditi; Simakurthy, Sriram; Dhull, Chirakshi

2017-07-04

To evaluate the outcomes of pars plana vitrectomy (PPV) with microscope-integrated intraoperative optical coherence tomography (I-OCT)-guided traction removal and center-sparing internal limiting membrane (cs-ILM) peeling. Nine eyes with myopic traction maculopathy as diagnosed on SD-OCT underwent PPV with I-OCT-guided cs-ILM peeling and were evaluated prospectively for resolution of central macular thickness (CMT) and improvement in best-corrected visual acuity (BCVA), and complications, if any, were noted. All patients were followed up for more than 9 months. Resolution of the macular retinoschisis was seen in all nine eyes on SD-OCT. At 36 weeks, there was a significant improvement in mean BCVA from the preoperative BCVA (P = 0.0089) along with a reduction in the CMT from 569.77 ± 263.19 to 166.0 ± 43.91 um (P = 0.0039). None of the eyes showed worsening of BCVA or development of full-thickness macular hole in the intraoperative or follow-up period. PPV with I-OCT-guided cs-ILM peeling helps in complete removal of traction, resolution of retinoschisis and good functional recovery with low intraoperative and postoperative complications.

Combined short- and long-axis ultrasound-guided central venous catheterization is superior to conventional techniques: A cross-over randomized controlled manikin trial.

Directory of Open Access Journals (Sweden)

Jun Takeshita

Full Text Available Visualizing the needle tip using the short-axis (SA ultrasound-guided central venous catheterization approach can be challenging. It has been suggested to start the process with the SA approach and then switch to the long-axis (LA; however, to our knowledge, this combination has not been evaluated. We compared the combined short- and long-axis (SLA approach with the SA approach in a manikin study.We performed a prospective randomized controlled cross-over study in an urban emergency department and intensive care unit. Resident physicians in post-graduate years 1-2 performed a simulated ultrasound-guided internal jugular vein puncture using the SA and SLA approaches on manikins. Twenty resident physicians were randomly assigned to two equal groups: (1 one group performed punctures using the SA approach followed by SLA; and (2 the other performed the same procedures in the opposite order. We compared the success rate and procedure duration for the two approaches. Procedural success was defined as insertion of the guide-wire into the vein while visualizing the needle tip at the time of anterior wall puncture, without penetrating the posterior wall.Six resident physicians (30% performed both approaches successfully, while 12 (60% performed the SLA approach, but not the SA, successfully. Those who performed the SA approach successfully also succeeded with the SLA approach. Two resident physicians (10% failed to perform both approaches. The SLA approach had a significantly higher success rate than the SA approach (P < 0.001. The median (interquartile range procedure duration was 59.5 [46.0-88.5] seconds and 45.0 [37.5-84.0] seconds for the SLA and SA approaches, respectively. The difference of the duration between the two procedures was 15.5 [0-28.5] seconds. There was no significant difference in duration between the two approaches (P = 0.12.Using the SLA approach significantly improved the success rate of internal jugular vein puncture performed by

La mise en oeuvre des codes d'éthique par le control interne

NARCIS (Netherlands)

van der Elst, C.F.

2014-01-01

The real value of the internal control system lies in the animation of the ethical values in the organization. The integration of ethical risks in the internal control process enables the moving notions of ethical behaviour and accommodate the training and inducement programs of all employees

Internal Medicine Point-of-Care Ultrasound Curriculum: Consensus Recommendations from the Canadian Internal Medicine Ultrasound (CIMUS) Group.

Science.gov (United States)

Ma, Irene W Y; Arishenkoff, Shane; Wiseman, Jeffrey; Desy, Janeve; Ailon, Jonathan; Martin, Leslie; Otremba, Mirek; Halman, Samantha; Willemot, Patrick; Blouw, Marcus

2017-09-01

Bedside point-of-care ultrasound (POCUS) is increasingly used to assess medical patients. At present, no consensus exists for what POCUS curriculum is appropriate for internal medicine residency training programs. This document details the consensus-based recommendations by the Canadian Internal Medicine Ultrasound (CIMUS) group, comprising 39 members, representing 14 institutions across Canada. Guiding principles for selecting curricular content were determined a priori. Consensus was defined as agreement by at least 80% of the members on POCUS applications deemed appropriate for teaching and assessment of trainees in the core (internal medicine postgraduate years [PGY] 1-3) and expanded (general internal medicine PGY 4-5) training programs. We recommend four POCUS applications for the core PGY 1-3 curriculum (inferior vena cava, lung B lines, pleural effusion, and abdominal free fluid) and three ultrasound-guided procedures (central venous catheterization, thoracentesis, and paracentesis). For the expanded PGY 4-5 curriculum, we recommend an additional seven applications (internal jugular vein, lung consolidation, pneumothorax, knee effusion, gross left ventricular systolic function, pericardial effusion, and right ventricular strain) and four ultrasound-guided procedures (knee arthrocentesis, arterial line insertion, arterial blood gas sampling, and peripheral venous catheterization). These recommendations will provide a framework for training programs at a national level.

Business Process Risk Management, Compliance and Internal Control: A Research Agenda

DEFF Research Database (Denmark)

Rikhardsson, Pall M.; Best, Peter; Green, Peter

(COSO). Based on an inductive methodological approach using literature review and interviews with managers engaged in risk management and internal control projects, this paper identifies three main areas that currently have management attention. These are business process risk management, compliance......Integration of risk management and management control is emerging as an important area in the wake of the Sarbanes-Oxley Act and with ongoing development of frameworks such as the Enterprise Risk Management (ERM) framework from the Committee of Sponsoring Organizations of the Treadway Commission...... management and internal control development. This paper discusses these areas and identifies a series of research questions regarding these critical issues....

Guiding device for a manipulator mast for internal inspection of a reactor pressure vessel

International Nuclear Information System (INIS)

Seifert, W.; Schlueter, H.

1977-01-01

A remote-controlled supporting device centering a manipulator mast is described which is mounted and operated above a reactor pressure vessel under water in such a way that rotations and vertical movements necessary for the internal inspection of the pressure vessel remain possible. (RW) [de

Control apparatus

International Nuclear Information System (INIS)

Doll, D.W.

1977-01-01

A nuclear reactor system is described in which flexible control rods are used to enable insertion of the control rods into guide holes in the core which are distributed over an area larger than the cross section of the control rod penetration in the reactor pressure vessel. Guide tubes extend from the penetration and fan out to the guide holes for guiding the control rods from the penetration to the guide holes

Nevada Compliance Implementation and Evaluation Guide

Energy Technology Data Exchange (ETDEWEB)

Cole, Pamala C.

2012-08-30

This Guide is designed to assist state and local code jurisdictions in achieving statewide compliance with the 2009 International Energy Conservation Code (IECC) for residential buildings and ANSI/ASHRAE/IESNA Standard 90.1-2007 for commercial buildings.

Utah Compliance Implementation and Evaluation Guide

Energy Technology Data Exchange (ETDEWEB)

Cole, Pamala C.

2012-08-30

This Guide is designed to assist state and local code jurisdictions in achieving statewide compliance with the 2009 International Energy Conservation Code (IECC) for residential buildings and ANSI/ASHRAE/IESNA Standard 90.1-2007 for commercial buildings.

Iowa Compliance Implementation and Evaluation Guide

Energy Technology Data Exchange (ETDEWEB)

Cole, Pamala C.

2012-09-04

This Guide is designed to assist state and local code jurisdictions in achieving statewide compliance with the 2009 International Energy Conservation Code (IECC) for residential buildings and ANSI/ASHRAE/IESNA Standard 90.1-2007 for commercial buildings.

Aspects Regarding the Use of Coco Model for Public Entities� Internal Control

Directory of Open Access Journals (Sweden)

Madalina Beldiman

2016-07-01

Full Text Available Control, from the semantic analysis point of view, is a permanent or regular activity, a situation, to track the overall progress and improvement measures. According to the Romanian legislation, internal control is defined as all forms of control exercised at the level of the public entity, including internal audit, established by management in accordance with its objectives and legal regulations, to ensure the management of public funds economically, efficiently and effective. In general, the audit includes organizational structures, methods and procedures.

12 CFR 609.940 - Internal systems and controls.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Internal systems and controls. 609.940 Section 609.940 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM ELECTRONIC COMMERCE Standards... business plan objectives and policies and procedures requirements regarding E-commerce; and (b) Prevent and...

78 FR 22263 - Advisory Council on the Standards for Internal Control in the Federal Government; Meeting

Science.gov (United States)

2013-04-15

... GOVERNMENT ACCOUNTABILITY OFFICE Advisory Council on the Standards for Internal Control in the... Standards for Internal Control in the Federal Government; Notice of Meeting. SUMMARY: The US Government Accountability Office (GAO) is initiating efforts to revise the Standards for Internal Control in the Federal...

Comparison between ultrasound guided technique and digital palpation technique for radial artery cannulation in adult patients: An updated meta-analysis of randomized controlled trials.

Science.gov (United States)

Bhattacharjee, Sulagna; Maitra, Souvik; Baidya, Dalim K

2018-03-22

Possible advantages and risks associated with ultrasound guided radial artery cannulation in-comparison to digital palpation guided method in adult patients are not fully known. We have compared ultrasound guided radial artery cannulation with digital palpation technique in this meta-analysis. Meta-analysis of randomized controlled trials. Trials conducted in operating room, emergency department, cardiac catheterization laboratory. PubMed and Cochrane Central Register of Controlled Trials (CENTRAL) were searched (from 1946 to 20th November 2017) to identify prospective randomized controlled trials in adult patients. Two-dimensional ultrasound guided radial artery catheterization versus digital palpation guided radial artery cannulation. Overall cannulation success rate, first attempt success rate, time to cannulation and mean number of attempts to successful cannulation. Odds ratio (OR) and standardized mean difference (SMD) or mean difference (MD) with 95% confidence interval (CI) were calculated for categorical and continuous variables respectively. Data of 1895 patients from 10 studies have been included in this meta- analysis. Overall cannulation success rate was similar between ultrasound guided technique and digital palpation [OR (95% CI) 2.01 (1.00, 4.06); p = 0.05]. Ultrasound guided radial artery cannulation is associated with higher first attempt success rate of radial artery cannulation in comparison to digital palpation [OR (95% CI) 2.76 (186, 4.10); p guided technique with palpation technique. Radial artery cannulation by ultrasound guidance may increase the first attempt success rate but not the overall cannulation success when compared to digital palpation technique. However, results of this meta-analysis should be interpreted with caution due presence of heterogeneity. Copyright © 2018. Published by Elsevier Inc.

Development of a new concept automatic frequency controller for an ultrasmall C-band linear accelerator guide

International Nuclear Information System (INIS)

Kamino, Yuichiro; Tsukuda, Kazuhiro; Kokubo, Masaki; Miura, Sadao; Hirai, Etsuro; Hiraoka, Masahiro; Ishikawa, Junzo

2007-01-01

We are developing a four-dimensional, image-guided radiotherapy system with a gimbaled x-ray head. The system has pursuing irradiation capability in addition to precise irradiation capability, owing to its agile x-ray head. The moving x-ray head requires a very small C-band accelerator guide. The heat intensity of the accelerator guide is much higher than that of conventional S-band medical linear accelerators. The resonance frequency varies over almost 1.0 MHz with a thermal time constant of about 30 s. An automatic frequency controller (AFC) is employed to compensate for this variation in resonance frequency. Furthermore, we noted that fast AFC response is important for step-and-shoot intensity modulation radiotherapy (IMRT), in which the beam is turned on and off frequently. Therefore, we invented a digital AFC, based on a new concept, to provide effective compensation for the thermal characteristics of the accelerator guide and to ensure stable and optimized x-ray treatment. An important aspect of the performance of the AFC is the capture-frequency range over which the AFC can seek, lock on to, and track the resonance frequency. The conventional, analog AFC used in S-band medical linear accelerators would have a capture-frequency range of about 0.9 MHz, if applied to our accelerator guide, and would be inappropriate. Conversely, our new AFC has a capture-frequency range of 24 MHz, which is well suited to our accelerator guide. The design concept behind this new AFC has been developed and verified. A full prototype system was constructed and tested on an existing accelerator guide at the rated x-ray output (500 cGy/min) of our radiotherapy system, with a pulse-repetition frequency of 300 Hz. The AFC acquired the resonance frequency of the accelerator guide within 0.15 s after beam-on, and provided stable tracking and adjustment of the frequency of the microwave source to the resonance frequency of the accelerator guide. With a planned improvement of the

Safety guide on fire protection in nuclear power plants

International Nuclear Information System (INIS)

1976-01-01

The purpose of the Safety Guide is to give specific design and operational guidance for protection from fire and explosion in nuclear power plants, based on the general guidance given in the relevant sections of the 'Safety Code of Practice - Design' and the 'Safety Code of Practice - Operation' of the International Atomic Energy Agency. The guide will confine itself to fire protection of safety systems and items important to safety, leaving the non-safety matters of fire protection in nuclear power plants to be decided upon the basis of the various available national and international practices and regulations. (HP) [de

Comparisons of Positron Emission Tomography/Computed Tomography and Ultrasound Imaging for Detection of Internal Mammary Lymph Node Metastases in Patients With Breast Cancer and Pathologic Correlation by Ultrasound-Guided Biopsy Procedures.

Science.gov (United States)

An, Yeong Yi; Kim, Sung Hun; Kang, Bong Joo; Lee, Ah Won

2015-08-01

To compare the diagnostic performance of [(18)F]fluorodeoxyglucose positron emission tomography/computed tomography (PET/CT) and ultrasound imaging (US) with pathologic results obtained by US-guided biopsy and to evaluate the role of US in detecting internal mammary lymph node (LN) metastases in patients with breast cancer. Between January 2008 and December 2012, 37 patients with breast cancer (median age, 51.4 years; range, 40-79 years) underwent US-guided biopsy for suspected internal mammary LN metastases. Medical records, radiologic images, and reports were reviewed and correlated with pathologic results. The positive internal mammary LN metastasis rate was 78.4%. All biopsies were performed safely without major complications. Only 8.1% of obtained samples were unsatisfactory. There were statistically significant differences in lesion size (P = .0002), standardized uptake value on PET/CT (P = .0015), biopsy methods (P = .002), and specimen adequacy (P = .007) between metastatic and benign groups. Of the clinical factorsreviewed, only concurrent distant metastasis was correlated with internal mammary LN metastasis (P< .0001). Sensitivities for detecting internal mammary LN metastases were 76.7%, 96.7%, and 92.9% for initial US examinations, initial US combined with second-look US for initially missed cases, and PET/CT, respectively (P= .017). In a subgroup analysis, the only significant difference found was in sensitivities between initial and combined US (P = .019). In a receiver operating characteristic curve analysis, the area under the curve for PET/CT using standardized uptake criteria (0.87) was higher than that for US using size criteria (0.83); however, this difference was not significant. Although PET/CT is the best noninvasive method for evaluating internal mammary LN metastases, US is also useful if internal mammary LN evaluation is routine during standard US surveillance of patients with breast cancer. Additionally, US-guided biopsies could be

Quality control of diagnostic x-ray equipment and film processing

International Nuclear Information System (INIS)

1993-01-01

According to the section 40 of the Radiation Act (592/92), the licensee is required in Finland to make the arrangements to control the function of the radiation equipment and related facilities used for medical procedures. The guide explains how quality control can be organized for diagnostic x-ray equipment. It also gives recommendations for constancy tests for conventional x-ray radiographic and fluoroscopic equipment and for film processing. The recommendations are based on the publications and statements of the International Committee for Radiation Protection (ICRP) and standardization organizations. The intention is that the operators of x-ray equipment or the maintenance personnel are able to perform the quality control tests presented in the guide

Numerical simulation of flow field in the China advanced research reactor flow-guide tank

International Nuclear Information System (INIS)

Xu Changjiang

2002-01-01

The flow-guide tank in China advanced research reactor (CARR) acts as a reactor inlet coolant distributor and play an important role in reducing the flow-induced vibration of the internal components of the reactor core. Numerical simulations of the flow field in the flow-guide tank under different conceptual designing configurations are carried out using the PHOENICS3.2. It is seen that the inlet coolant is well distributed circumferentially into the flow-guide tank with the inlet buffer plate and the flow distributor barrel. The maximum cross-flow velocity within the flow-guide tank is reduced significantly, and the reduction of flow-induced vibration of reactor internals is expected

Classification guide: Paralympic Games London 2012

OpenAIRE

2013-01-01

The London 2012 Paralympic Games Classification Guide is designed to provide National Paralympic Committees (NPCs) and International Paralympic Sport Federations (IPSFs) with information about the classification policies and procedures that will apply to the London 2012 Paralympic Games.

International training workshop on quality control and management of food irradiation

International Nuclear Information System (INIS)

2004-01-01

The International Training Workshop on Quality Control and Management of Food Indantrione was hold from 28-30, August, 2004 in Beijing, China and organized by Chinese Society of Nuclear Agriculture and China Isotope and Radiation Association. 10 Articles were collected in this symposium including training lectures. The contents included: international developments in food irradiation, Quality control and magement of food irradiation, industrializing development of irradiated food in China, Food irradiator and its quality management, research in setting standard for enterprise about irradiated products and etc.

78 FR 40740 - Advisory Council on the Standards for Internal Control in the Federal Government

Science.gov (United States)

2013-07-08

... GOVERNMENT ACCOUNTABILITY OFFICE Advisory Council on the Standards for Internal Control in the... on the Green Book Advisory Council and the Standards for Internal Control in the Federal Government.... SUMMARY: The US Government Accountability Office (GAO) is preparing to revise the Standards for Internal...

International Co-Operation in Control Engineering Education Using Online Experiments

Science.gov (United States)

Henry, Jim; Schaedel, Herbert M.

2005-01-01

This paper describes the international co-operation experience in teaching control engineering with laboratories being conducted remotely by students via the Internet. This paper describes how the students ran the experiments and their personal experiences with the laboratory. A tool for process identification and controller tuning based on…

Surgical dissection of the internal carotid artery under flow control by proximal vessel clamping reduces embolic infarcts during carotid endarterectomy.

Science.gov (United States)

Yoshida, Kazumichi; Kurosaki, Yoshitaka; Funaki, Takeshi; Kikuchi, Takayuki; Ishii, Akira; Takahashi, Jun C; Takagi, Yasushi; Yamagata, Sen; Miyamoto, Susumu

2014-01-01

To evaluate the efficacy of flow control of the internal carotid artery (ICA) by the clamping of the common carotid artery, external carotid artery, and superior thyroid artery during surgical ICA dissection to reduce ischemic complications after carotid endarterectomy (CEA). Sixty-seven patients (59 men; age, 70.5 ± 6.2 years) who underwent CEA by the same surgeon were retrospectively studied. Both conventional CEA (n = 29) and flow-control CEA (n = 38) were performed with the patient under general anesthesia and with the use of somatosensory-evoked potential and near-infrared spectroscopy monitoring as a guide for selective shunting. The number of new postoperative infarcts was assessed with preoperative and postoperative diffusion-weighted images (DWIs) obtained within 3 days of surgery. In addition to surgical technique, the effects of the following factors on new infarcts also were examined: age, side of ICA stenosis, high-grade stenosis, symptoms, and application of shunting. New postoperative DWI lesions were observed in 7 of 67 patients (10.4%), and none of them was symptomatic. With respect to operative technique, the incidence rate of DWI spots was significantly lower in the flow-control group (2.6%) than in the conventional group (20.7%), odds ratio: 0.069; 95% confidence interval: 0.006-0.779; P = 0.031). On multiple logistic regression analysis, age, side of ICA stenosis, high-grade stenosis, symptoms, and the use of internal shunting did not have significant effects on new postoperative DWI lesions, whereas technique did have an effect. The proximal flow-control technique for CEA helps avoid embolic complications during surgical ICA dissection. Copyright © 2014 Elsevier Inc. All rights reserved.

ROMANIA’S FACTS ABOUT INTERNAL CONTROL ENVIRONMENT OF EUROPEAN SOCIAL FUND FINANCED PROJECTS

Directory of Open Access Journals (Sweden)

Dogar Cristian

2012-07-01

Full Text Available The malfunctioning of internal control system of European Social Fund (ESF financed interventions may prejudice the sound financial management principle. Incorporating COSO principles in the beneficiary’s internal control systems may provide some warranties about compliance to the above mentioned principle as described in the EC Regulation 1605-2002. This study aims to explore some facts in actual internal control environment, as a base for future improvements of Romanian ESF beneficiary’s internal control systems ESF financed interventions covers a large range of costs for implementing labor market related services. But supporting costs according to the sound financial management principle calls for best value for money in real and legal operations. Without some specifics from the donor or a mutual accepted best practice model, most of the ESF beneficiaries are reporting their efforts to actual researches and specialized literature regarding internal control system implementation in services. This study was realized in April 2012 by applying an investigation instrument, an on-line questionnaire collecting both opinions and factual data as well to a number of 962 members of a practice community for ESF interventions implementation. This technique was used to test hypotheses regarding the premises existence for a future improvement of the existing internal control system model. 100 members of this community: managers, accountants, auditors financial responsible and other team members answered anonymously, revealing a real concern for internal control, providing as well a different side image for this. Analyzing all stakeholder answers, we may consider that our hypothesis is correct and there is a real need for internal control environment improvements. This study is a part of a larger research “New models of the accounting and internal control systems of ESF financed interventions in Romania”, addressing a qualitative

Duplex recombinase polymerase amplification assays incorporating competitive internal controls for bacterial meningitis detection.

Science.gov (United States)

Higgins, Owen; Clancy, Eoin; Forrest, Matthew S; Piepenburg, Olaf; Cormican, Martin; Boo, Teck Wee; O'Sullivan, Nicola; McGuinness, Claire; Cafferty, Deirdre; Cunney, Robert; Smith, Terry J

2018-04-01

Recombinase polymerase amplification (RPA) is an isothermal nucleic acid amplification technology that provides rapid and robust infectious disease pathogen detection, ideal for point-of-care (POC) diagnostics in disease-prevalent low-resource countries. We have developed and evaluated three duplex RPA assays incorporating competitive internal controls for the detection of leading bacterial meningitis pathogens. Streptococcus pneumoniae, Neisseria meningitidis and Haemophilus influenzae singleplex RPA assays were initially developed and evaluated, demonstrating 100% specificity with limits of detection of 4.1, 8.5 and 3.9 genome copies per reaction, respectively. Each assay was further developed into internally controlled duplex RPA assays via the incorporation of internal amplification control templates. Clinical performance of each internally controlled duplex RPA assay was evaluated by testing 64 archived PCR-positive clinical samples. Compared to real-time PCR, all duplex RPA assays demonstrated 100% diagnostic specificity, with diagnostic sensitivities of 100%, 86.3% and 100% for the S. pneumoniae, N. meningitidis and H. influenzae assays, respectively. This study details the first report of internally controlled duplex RPA assays for the detection of bacterial meningitis pathogens: S. pneumoniae, N. meningitidis and H. influenzae. We have successfully demonstrated the clinical diagnostic utility of each duplex RPA assay, introducing effective diagnostic technology for POC bacterial meningitis identification in disease-prevalent developing countries. Copyright © 2018 Elsevier Inc. All rights reserved.

Internal quality control of neutron activation analysis laboratory

Energy Technology Data Exchange (ETDEWEB)

Kim, S. H.; Mun, J. H.; BaeK, S. Y.; Jung, Y. S.; Kim, Y. J. [KAERI, Taejon (Korea, Republic of)

2004-07-01

The importance for quality assurance and control in analytical laboratories has been emphasized, day by day. Internal quality control using certified reference materials(CRMs) can be one of effective methods for this purpose. In this study, 10 kinds of CRMs consisting of soil, sediment and biological matrix were analyzed. To evaluate the confidence of analytical results and the validation of testing method and procedure, the accuracy and the precision of the measured elements were treated statistically and the reproducibility was compared with those values produced before 2003.

Nonlinearity measure and internal model control based linearization in anti-windup design

Energy Technology Data Exchange (ETDEWEB)

Perev, Kamen [Systems and Control Department, Technical University of Sofia, 8 Cl. Ohridski Blvd., 1756 Sofia (Bulgaria)

2013-12-18

This paper considers the problem of internal model control based linearization in anti-windup design. The nonlinearity measure concept is used for quantifying the control system degree of nonlinearity. The linearizing effect of a modified internal model control structure is presented by comparing the nonlinearity measures of the open-loop and closed-loop systems. It is shown that the linearization properties are improved by increasing the control system local feedback gain. However, it is emphasized that at the same time the stability of the system deteriorates. The conflicting goals of stability and linearization are resolved by solving the design problem in different frequency ranges.

25 CFR 542.17 - What are the minimum internal control standards for complimentary services or items?

Science.gov (United States)

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false What are the minimum internal control standards for... THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.17 What are the minimum internal control standards for complimentary services or items? (a) Each Tribal gaming regulatory authority or...

Optimal Power Flow Using Gbest-Guided Cuckoo Search Algorithm with Feedback Control Strategy and Constraint Domination Rule

Directory of Open Access Journals (Sweden)

Gonggui Chen

2017-01-01

Full Text Available The optimal power flow (OPF is well-known as a significant optimization tool for the security and economic operation of power system, and OPF problem is a complex nonlinear, nondifferentiable programming problem. Thus this paper proposes a Gbest-guided cuckoo search algorithm with the feedback control strategy and constraint domination rule which is named as FCGCS algorithm for solving OPF problem and getting optimal solution. This FCGCS algorithm is guided by the global best solution for strengthening exploitation ability. Feedback control strategy is devised to dynamically regulate the control parameters according to actual and specific feedback value in the simulation process. And the constraint domination rule can efficiently handle inequality constraints on state variables, which is superior to traditional penalty function method. The performance of FCGCS algorithm is tested and validated on the IEEE 30-bus and IEEE 57-bus example systems, and simulation results are compared with different methods obtained from other literatures recently. The comparison results indicate that FCGCS algorithm can provide high-quality feasible solutions for different OPF problems.

Corporate internal control system in the process of transformations: formation, development, problems

OpenAIRE

Kanapickienė, Rasa

2009-01-01

In the market environment every company is seeking to obtain and maintain the best market share. One of the mechanisms in achieving this goal is an effective internal control of the company. With growing competition, fast development and introduction of new technologies, progressing complexity of business projects, and enlarging business diversity, company management is becoming increasingly more complicated. Consequently, company internal control is becoming a more and more complicated task....

Electromobility guide; Wegweiser Elektromobilitaet

Energy Technology Data Exchange (ETDEWEB)

Becks, Thomas; De Doncker, Rik; Karg, Ludwig; Rehtanz, Christian; Reinhardt, Andreas-Michael; Willums, Jan-Olaf [eds.

2010-07-01

Knowing about funded projects and their results helps to safeguard own innovation activities, promotes precompetition know-how transfer and makes it easier to use synergetic effects. This is where the new ''Electromobility Guide'' has a contribution to make. It gives the reader basic information on more than 150 national and international projects about electromobility. It names contact partners and gives corresponding details to make it easier to collect additional information. Our intention is for the Electromobility Guide to act as an incentive for sharing current, authentic, correct and reliable information about all electromobility projects in order to expand the joint data basis. Please help us in this respect and support electromobility in Germany with your knowledge. (orig.)

PRIVILEGES AND IMMUNITIES IN SWITZERLAND: PRACTICAL GUIDE

CERN Multimedia

2003-01-01

The Permanent Mission of Switzerland to the International Organisations in Geneva has informed CERN that the "Practical Manual of the regime of privileges and immunities and other facilities" is available on its Web site: - in English (http://www.dfae.admin.ch/geneva_miss/e/home/guide.html); - in French (http://www.dfae.admin.ch/geneva_miss/f/home/guide.html). Comprising around ten chapters, each dealing with a different subject (insurance, real estate, customs, etc.), the guide is not exhaustive but will be regularly supplemented, expanded and updated. The Mission specifies that the information contained in the document is given only as guide and that it implies no legal commitment on the part of the Host State. Relations with the Host States Service http://www.cern.ch/relations/ Tel. 72848

Internal Leakage Fault Detection and Tolerant Control of Single-Rod Hydraulic Actuators

Directory of Open Access Journals (Sweden)

Jianyong Yao

2014-01-01