Event building in an intelligent network interface card for the LHCb readout network

CERN Document Server

Dufey, J P; Neufeld, N; Zuin, M

2001-01-01

LHCb is an experiment being constructed at CERN's LHC accelerator for the purpose of studying precisely the CP violation parameters in the B-B system. Triggering poses special problems since the interesting events containing B-mesons are immersed in a large background of inelastic p-p reactions. Therefore, a 4 Level Triggering scheme (Level 0 to Level 3) has been implemented. Powerful embedded processors, used in modern intelligent Network Interface Cards (smart NICs), make it attractive to use them to handle the event building protocol in the high-speed data acquisition system of the LHCb experiment. The implementation of an event building algorithm developed for a specific Gigabit Ethernet NIC is presented and performance data are discussed. 5 Refs.

A replica exchange transition interface sampling method with multiple interface sets for investigating networks of rare events

Science.gov (United States)

Swenson, David W. H.; Bolhuis, Peter G.

2014-07-01

The multiple state transition interface sampling (TIS) framework in principle allows the simulation of a large network of complex rare event transitions, but in practice suffers from convergence problems. To improve convergence, we combine multiple state TIS [J. Rogal and P. G. Bolhuis, J. Chem. Phys. 129, 224107 (2008)] with replica exchange TIS [T. S. van Erp, Phys. Rev. Lett. 98, 268301 (2007)]. In addition, we introduce multiple interface sets, which allow more than one order parameter to be defined for each state. We illustrate the methodology on a model system of multiple independent dimers, each with two states. For reaction networks with up to 64 microstates, we determine the kinetics in the microcanonical ensemble, and discuss the convergence properties of the sampling scheme. For this model, we find that the kinetics depend on the instantaneous composition of the system. We explain this dependence in terms of the system's potential and kinetic energy.

Interface Screenings

DEFF Research Database (Denmark)

Thomsen, Bodil Marie Stavning

2015-01-01

In Wim Wenders' film Until the End of the World (1991), three different diagrams for the visual integration of bodies are presented: 1) GPS tracking and mapping in a landscape, 2) video recordings layered with the memory perception of these recordings, and 3) data-created images from dreams...... and memories. From a transvisual perspective, the question is whether or not these (by now realized) diagrammatic modes involving the body in ubiquitous global media can be analysed in terms of the affects and events created in concrete interfaces. The examples used are filmic as felt sensations...

Processing data communications events by awakening threads in parallel active messaging interface of a parallel computer

Science.gov (United States)

Archer, Charles J.; Blocksome, Michael A.; Ratterman, Joseph D.; Smith, Brian E.

2016-03-15

Processing data communications events in a parallel active messaging interface (`PAMI`) of a parallel computer that includes compute nodes that execute a parallel application, with the PAMI including data communications endpoints, and the endpoints are coupled for data communications through the PAMI and through other data communications resources, including determining by an advance function that there are no actionable data communications events pending for its context, placing by the advance function its thread of execution into a wait state, waiting for a subsequent data communications event for the context; responsive to occurrence of a subsequent data communications event for the context, awakening by the thread from the wait state; and processing by the advance function the subsequent data communications event now pending for the context.

Interfacing system isolation experience review. Final report, August 1991

International Nuclear Information System (INIS)

1991-08-01

A light water reactor power plant has auxiliary systems interconnected with the reactor coolant system that are not designed for reactor operating pressure. These principally include the shutdown heat removal systems and various emergency core cooling injection systems. There are multiple isolation valves that prevent rector vessel pressure from causing overpressurization in low pressure interfacing systems. Combinations of hardware failures or operational errors are necessary to expose these systems to overpressurization. This experience review provides insights regarding the risk that an auxiliary system might become over pressurized from the reactor system. While analyses show that for the pressures involved the probability of auxiliary system failure is low, the auxiliary system conceivably might fail outside of containment while the plant is at power. Such a potential event has come to be called an interfacing system loss of coolant accident (ISLOCA). This report provides a compilation of occurrences where valve leakage, valve failure, or valve mispositioning played a role in the ability to maintain interfacing system isolation. Seventeen U.S. BWR events, twenty three U.S. PWR events and one foreign event are discussed in the report. Eleven of the U.S. BWR events and ten U.S. PWR events are judged to relate directly to the so-called ISLOCA event in that they fulfilled one or more of the failures necessary to cause an ISLOCA. (author)

Photophysics and electrochemistry relevant to photocatalytic water splitting involved at solid–electrolyte interfaces

KAUST Repository

Shinagawa, Tatsuya

2016-08-04

Direct photon to chemical energy conversion using semiconductor-electrocatalyst-electrolyte interfaces has been extensively investigated for more than a half century. Many studies have focused on screening materials for efficient photocatalysis. Photocatalytic efficiency has been improved during this period but is not sufficient for industrial commercialization. Detailed elucidation on the photocatalytic water splitting process leads to consecutive six reaction steps with the fundamental parameters involved: The photocatalysis is initiated involving photophysics derived from various semiconductor properties (1: photon absorption, 2: exciton separation). The generated charge carriers need to be transferred to surfaces effectively utilizing the interfaces (3: carrier diffusion, 4: carrier transport). Consequently, electrocatalysis finishes the process by producing products on the surface (5: catalytic efficiency, 6: mass transfer of reactants and products). Successful photocatalytic water splitting requires the enhancement of efficiency at each stage. Most critically, a fundamental understanding of the interfacial phenomena is highly desired for establishing "photocatalysis by design" concepts, where the kinetic bottleneck within a process is identified by further improving the specific properties of photocatalytic materials as opposed to blind material screening. Theoretical modeling using the identified quantitative parameters can effectively predict the theoretically attainable photon-conversion yields. This article provides an overview of the state-of-the-art theoretical understanding of interfacial problems mainly developed in our laboratory. Photocatalytic water splitting (especially hydrogen evolution on metal surfaces) was selected as a topic, and the photophysical and electrochemical processes that occur at semiconductor-metal, semiconductor-electrolyte and metal-electrolyte interfaces are discussed.

Does Sport Event Involvement Influence Brand Recognition of Official Sponsors and Ambush Marketers?

Directory of Open Access Journals (Sweden)

Piątkowska Monika

2016-12-01

Full Text Available The main aim of the study is to verify how event involvement in the UEFA Euro 2012 influenced the recognition of both sponsors’ and ambushers’ brands. Computer-Assisted Personal Interviews were conducted on a representative sample of the Polish society (N = 1,000. On the basis of five groups of consumers regarding involvement in the event, authors examined brand recognition, using Top of Mind Awareness (TOMA tests of official sponsors and ambushers.

Discrete event simulation for petroleum transfers involving harbors, refineries and pipelines

Energy Technology Data Exchange (ETDEWEB)

Martins, Marcella S.R.; Lueders, Ricardo; Delgado, Myriam R.B.S. [Universidade Tecnologica Federal do Parana (UTFPR), Curitiba, PR (Brazil)

2009-07-01

Nowadays a great effort has been spent by companies to improve their logistics in terms of programming of events that affect production and distribution of products. In this case, simulation can be a valuable tool for evaluating different behaviors. The objective of this work is to build a discrete event simulation model for scheduling of operational activities in complexes containing one harbor and two refineries interconnected by a pipeline infrastructure. The model was developed in Arena package, based on three sub-models that control pier allocation, loading of tanks, and transfers to refineries through pipelines. Preliminary results obtained for a given control policy, show that profit can be calculated by taking into account many parameters such as oil costs on ships, pier using, over-stay of ships and interface costs. Such problem has already been considered in the literature but using different strategies. All these factors should be considered in a real-world operation where decision making tools are necessary to obtain high returns. (author)

Assessment of events involving transport of radioactive materials in France, 1999-2011

International Nuclear Information System (INIS)

2013-01-01

This report presents transport events involving radioactive materials that occurred in France from 1999 to 2011 and entered in the IRSN's database. For each of the 1,304 events recorded, many parameters have been collected and analysed from information listed in the declarations and reports of events sent by users (type of event, purpose, package design, INES level, etc.). The number of events declared in 2010 and 2011 is slightly higher than the average of 100 events per year. The two main reasons for declaration concern errors in transport documentation or labelling and handling mishaps. The new data confirm the downward trend in frequency of package and vehicle contaminations. A short description of outstanding events in 2010 and 2011 is included. This assessment also gives an outline of the actions recommended by IRSN to avoid recurrence of declared events and improve the safety of radioactive material transport. (authors)

Issues in Informal Education: Event-Based Science Communication Involving Planetaria and the Internet

Science.gov (United States)

Adams, Mitzi L.; Gallagher, D. L.; Whitt, A.; Whitaker, Ann F. (Technical Monitor)

2001-01-01

For the last several years the Science Directorate at Marshall Space Flight Center has carried out a diverse program of Internet-based science communication. The program includes extended stories about NASA science, a curriculum resource for teachers tied to national education standards, on-line activities for students, and webcasts of real-time events. The focus of sharing real-time science related events has been to involve and excite students and the public about science. Events have involved meteor showers, solar eclipses, natural very low frequency radio emissions, and amateur balloon flights. In some cases broadcasts accommodate active feedback and questions from Internet participants. Panel participation will be used to communicate the problems and lessons learned from these activities over the last three years.

More playful user interfaces interfaces that invite social and physical interaction

CERN Document Server

2015-01-01

This book covers the latest advances in playful user interfaces – interfaces that invite social and physical interaction. These new developments include the use of audio, visual, tactile and physiological sensors to monitor, provide feedback and anticipate the behavior of human users. The decreasing cost of sensor and actuator technology makes it possible to integrate physical behavior information in human-computer interactions. This leads to many new entertainment and game applications that allow or require social and physical interaction in sensor- and actuator-equipped smart environments. The topics discussed include: human-nature interaction, human-animal interaction and the interaction with tangibles that are naturally integrated in our smart environments. Digitally supported remote audience participation in artistic or sport events is also discussed. One important theme that emerges throughout the book is the involvement of users in the digital-entertainment design process or even design and implement...

Tactile event-related potentials in amyotrophic lateral sclerosis (ALS): Implications for brain-computer interface.

Science.gov (United States)

Silvoni, S; Konicar, L; Prats-Sedano, M A; Garcia-Cossio, E; Genna, C; Volpato, C; Cavinato, M; Paggiaro, A; Veser, S; De Massari, D; Birbaumer, N

2016-01-01

We investigated neurophysiological brain responses elicited by a tactile event-related potential paradigm in a sample of ALS patients. Underlying cognitive processes and neurophysiological signatures for brain-computer interface (BCI) are addressed. We stimulated the palm of the hand in a group of fourteen ALS patients and a control group of ten healthy participants and recorded electroencephalographic signals in eyes-closed condition. Target and non-target brain responses were analyzed and classified offline. Classification errors served as the basis for neurophysiological brain response sub-grouping. A combined behavioral and quantitative neurophysiological analysis of sub-grouped data showed neither significant between-group differences, nor significant correlations between classification performance and the ALS patients' clinical state. Taking sequential effects of stimuli presentation into account, analyses revealed mean classification errors of 19.4% and 24.3% in healthy participants and ALS patients respectively. Neurophysiological correlates of tactile stimuli presentation are not altered by ALS. Tactile event-related potentials can be used to monitor attention level and task performance in ALS and may constitute a viable basis for future BCIs. Implications for brain-computer interface implementation of the proposed method for patients in critical conditions, such as the late stage of ALS and the (completely) locked-in state, are discussed. Copyright © 2015 International Federation of Clinical Neurophysiology. Published by Elsevier Ireland Ltd. All rights reserved.

Atomistic Modeling of Corrosion Events at the Interface between a Metal and Its Environment

Directory of Open Access Journals (Sweden)

Christopher D. Taylor

2012-01-01

Full Text Available Atomistic simulation is a powerful tool for probing the structure and properties of materials and the nature of chemical reactions. Corrosion is a complex process that involves chemical reactions occurring at the interface between a material and its environment and is, therefore, highly suited to study by atomistic modeling techniques. In this paper, the complex nature of corrosion processes and mechanisms is briefly reviewed. Various atomistic methods for exploring corrosion mechanisms are then described, and recent applications in the literature surveyed. Several instances of the application of atomistic modeling to corrosion science are then reviewed in detail, including studies of the metal-water interface, the reaction of water on electrified metallic interfaces, the dissolution of metal atoms from metallic surfaces, and the role of competitive adsorption in controlling the chemical nature and structure of a metallic surface. Some perspectives are then given concerning the future of atomistic modeling in the field of corrosion science.

: Principles of safety measures of sports events organizers without the involvement of police

OpenAIRE

Buchalová, Kateřina

2013-01-01

Title: Principles of safety measures of sports events organizers without the involvement of police Objectives: The aim of this thesis is a description of security measures at sporting events organizers. Methods: The thesis theoretical style is focused on searching for available sources of study and research, and writing their summary comparing safety measures of the organizers. Results: This work describes the activities of the organizers of sports events and precautions that must be provided...

Technical investigation of a pyrophoric event involving corrosion products from HEU ZPPR fuel plates

International Nuclear Information System (INIS)

Totemeier, T. C.

2000-01-01

A pyrophoric event recently occurred which involved corrosion products collected from highly-enriched uranium (HEU) fuel plates used in the Zero Power Physics Reactor (ZPPR). This paper summarizes the event and its background, and presents the results of an investigation into its source and mechanism. The investigation focused on characterization of corrosion product samples similar to those involved in the event using thermo-gravimetric analysis (TGA). Burning curve TGA tests were performed to measure the ignition temperature and hydride fractions of corrosion products in several different conditions to assess the effects of passivation treatment and long-term storage on chemical reactivity. The hydride fraction and ignition temperature of the corrosion products were found to be strongly dependent on the corrosion extent of the source metal. The results indicate that the energy source for the event was a considerable quantity of uranium hydride present in the corrosion products, but the specific ignition mechanism could not be identified

Issues in Informal Education: Event-Based Science Communication Involving Planetaria and the Internet

Science.gov (United States)

Adams, M.; Gallagher, D. L.; Whitt, A.; Six, N. Frank (Technical Monitor)

2002-01-01

For the past four years the Science Directorate at Marshall Space Flight Center has carried out a diverse program of science communication through the web resources on the Internet. The program includes extended stories about NAS.4 science, a curriculum resource for teachers tied to national education standards, on-line activities for students, and webcasts of real-time events. Events have involved meteor showers, solar eclipses, natural very low frequency radio emissions, and amateur balloon flights. In some cases broadcasts accommodate active feedback and questions from Internet participants. We give here, examples of events, problems, and lessons learned from these activities.

A database for TMT interface control documents

Science.gov (United States)

Gillies, Kim; Roberts, Scott; Brighton, Allan; Rogers, John

2016-08-01

The TMT Software System consists of software components that interact with one another through a software infrastructure called TMT Common Software (CSW). CSW consists of software services and library code that is used by developers to create the subsystems and components that participate in the software system. CSW also defines the types of components that can be constructed and their roles. The use of common component types and shared middleware services allows standardized software interfaces for the components. A software system called the TMT Interface Database System was constructed to support the documentation of the interfaces for components based on CSW. The programmer describes a subsystem and each of its components using JSON-style text files. A command interface file describes each command a component can receive and any commands a component sends. The event interface files describe status, alarms, and events a component publishes and status and events subscribed to by a component. A web application was created to provide a user interface for the required features. Files are ingested into the software system's database. The user interface allows browsing subsystem interfaces, publishing versions of subsystem interfaces, and constructing and publishing interface control documents that consist of the intersection of two subsystem interfaces. All published subsystem interfaces and interface control documents are versioned for configuration control and follow the standard TMT change control processes. Subsystem interfaces and interface control documents can be visualized in the browser or exported as PDF files.

A controlled vocabulary for pathway entities and events.

Science.gov (United States)

Jupe, Steve; Jassal, Bijay; Williams, Mark; Wu, Guanming

2014-01-01

Entities involved in pathways and the events they participate in require descriptive and unambiguous names that are often not available in the literature or elsewhere. Reactome is a manually curated open-source resource of human pathways. It is accessible via a website, available as downloads in standard reusable formats and via Representational State Transfer (REST)-ful and Simple Object Access Protocol (SOAP) application programming interfaces (APIs). We have devised a controlled vocabulary (CV) that creates concise, unambiguous and unique names for reactions (pathway events) and all the molecular entities they involve. The CV could be reapplied in any situation where names are used for pathway entities and events. Adoption of this CV would significantly improve naming consistency and readability, with consequent benefits for searching and data mining within and between databases. Database URL: http://www.reactome.org. © The Author(s) 2014. Published by Oxford University Press.

123I-MIBG imaging detects cardiac involvement and predicts cardiac events in Churg-Strauss syndrome

International Nuclear Information System (INIS)

Horiguchi, Yoriko; Morita, Yukiko; Tsurikisawa, Naomi; Akiyama, Kazuo

2011-01-01

In Churg-Strauss syndrome (CSS) it is important to detect cardiac involvement, which predicts poor prognosis. This study evaluated whether 123 I-metaiodobenzylguanidine (MIBG) scintigraphy could detect cardiac damage and predict cardiac events in CSS. 123 I-MIBG scintigraphy was performed in 28 patients with CSS, 12 of whom had cardiac involvement. The early and delayed heart to mediastinum ratio (early H/M and delayed H/M) and washout rate were calculated by using 123 I-MIBG scintigraphy and compared with those in control subjects. Early H/M and delayed H/M were significantly lower and the washout rate was significantly higher in patients with cardiac involvement than in those without and in controls (early H/M, p = 0.0024, p = 0.0001; delayed H/M, p = 0.0002, p = 0.0001; washout rate, p = 0.0012, p = 0.0052 vs those without and vs controls, respectively). Accuracy for detecting cardiac involvement was 86% for delayed H/M and washout rate and 79% for early H/M and B-type natriuretic peptide (BNP). Kaplan-Meier analysis showed significantly lower cardiac event-free rates in patients with early H/M ≤ 2.18 and BNP > 21.8 pg/ml than those with early H/M > 2.18 and BNP ≤ 21.8 pg/ml (log-rank test p = 0.006). Cardiac sympathetic nerve function was damaged in CSS patients with cardiac involvement. 123 I-MIBG scintigraphy was useful in detecting cardiac involvement and in predicting cardiac events. (orig.)

Interface Consistency

DEFF Research Database (Denmark)

Staunstrup, Jørgen

1998-01-01

This paper proposes that Interface Consistency is an important issue for the development of modular designs. Byproviding a precise specification of component interfaces it becomes possible to check that separately developedcomponents use a common interface in a coherent matter thus avoiding a very...... significant source of design errors. Awide range of interface specifications are possible, the simplest form is a syntactical check of parameter types.However, today it is possible to do more sophisticated forms involving semantic checks....

Smartphone interface to USGS 'Did You Feel It?' - Getting More Citizens Involved in Science

Science.gov (United States)

Savran, W. H.; Petersen, R. I.; Wukusick, M.

2013-12-01

Over the last hundred years, we have put forth a concerted effort to install a dense array of seismometers - used to monitor and measure seismic waves propagating through the earth. In addition to expensive instrumentation, citizens provide useful data to the earthquake science community as demonstrated by the USGS 'Did you feel it?' project. Currently, the 'Did You Feel It?' data is acquired, through an internet browser, from a long questionnaire. With the increasing number of smartphone owners, an application interfacing the population with the 'Did you feel it?' project introduces the next logical step in progressing this technology. We are developing an application, which utilizes many features of modern smartphones to provide a better interface from citizen to scientist. Our application will notify users of any earthquake within a predefined distance above a predefined size. At this point, the user has the option to answer the questionnaire and send their experience of the earthquake to the USGS 'Did you feel it?' database or simply decline. Instead of a cumbersome web-form, the user will be prompted for questions in line with the paradigm of current smartphone application development. An easy, interactive interface allows the user to answer the questions rapidly in a fun manner, resulting in more participation. In addition to putting earthquake science into the hands of many more citizens, the application will also allow the user to place an emergency call in case of casualty during the next big one. Future versions of the application will allow users to take, view, and submit photographs of damage caused by the earthquake. Also, users will be able to view intensity maps generated for the event they evaluated. The USGS has already done an incredible job setting up the 'Did you feel it?' framework; having a more accessible user interface to acquire data will greatly expand the possibilities of the 'Did you feel it?' project.

Refinement by interface instantiation

DEFF Research Database (Denmark)

Hallerstede, Stefan; Hoang, Thai Son

2012-01-01

be easily refined. Our first contribution hence is a proposal for a new construct called interface that encapsulates the external variables, along with a mechanism for interface instantiation. Using the new construct and mechanism, external variables can be refined consistently. Our second contribution...... is an approach for verifying the correctness of Event-B extensions using the supporting Rodin tool. We illustrate our approach by proving the correctness of interface instantiation....

Coping with human errors through system design: Implications for ecological interface design

DEFF Research Database (Denmark)

Rasmussen, Jens; Vicente, Kim J.

1989-01-01

Research during recent years has revealed that human errors are not stochastic events which can be removed through improved training programs or optimal interface design. Rather, errors tend to reflect either systematic interference between various models, rules, and schemata, or the effects...... of the adaptive mechanisms involved in learning. In terms of design implications, these findings suggest that reliable human-system interaction will be achieved by designing interfaces which tend to minimize the potential for control interference and support recovery from errors. In other words, the focus should...... be on control of the effects of errors rather than on the elimination of errors per se. In this paper, we propose a theoretical framework for interface design that attempts to satisfy these objectives. The goal of our framework, called ecological interface design, is to develop a meaningful representation...

Status of transport events involving radioactive materials which occurred in France between 1999 and 2011

International Nuclear Information System (INIS)

2013-01-01

This report presents transport events involving radioactive materials, occurred on French territory from 1999 to 2011, listed in the IRSN's database. 1,304 events have been recorded. For each of them, many parameters have been collected and analysed from information listed in the notifications and reports of the events sent by users (type of event, purpose, package design, level on the INES scale...). The numbers of events notified in 2010 and 2011 are slightly higher than the average of 100 events per year. The two main causes of notification concern documentation errors (in transport documents or labeling) and handling mishaps. The downward trend of frequency of package or conveyance contaminations has been confirmed. A short description of the outstanding events occurred in 2010 and 2011 is proposed. This synthesis also gives an outline of the actions recommended by IRSN to avoid recurrence of the notified events and improve the safety of the transports of radioactive materials

{sup 123}I-MIBG imaging detects cardiac involvement and predicts cardiac events in Churg-Strauss syndrome

Energy Technology Data Exchange (ETDEWEB)

Horiguchi, Yoriko; Morita, Yukiko [National Hospital Organization Sagamihara National Hospital, Department of Cardiology, Sagamihara City, Kanagawa (Japan); Tsurikisawa, Naomi; Akiyama, Kazuo [National Hospital Organization Sagamihara National Hospital, Clinical Research Centre for Allergy and Rheumatology, Sagamihara City, Kanagawa (Japan)

2011-02-15

In Churg-Strauss syndrome (CSS) it is important to detect cardiac involvement, which predicts poor prognosis. This study evaluated whether {sup 123}I-metaiodobenzylguanidine (MIBG) scintigraphy could detect cardiac damage and predict cardiac events in CSS. {sup 123}I-MIBG scintigraphy was performed in 28 patients with CSS, 12 of whom had cardiac involvement. The early and delayed heart to mediastinum ratio (early H/M and delayed H/M) and washout rate were calculated by using {sup 123}I-MIBG scintigraphy and compared with those in control subjects. Early H/M and delayed H/M were significantly lower and the washout rate was significantly higher in patients with cardiac involvement than in those without and in controls (early H/M, p = 0.0024, p = 0.0001; delayed H/M, p = 0.0002, p = 0.0001; washout rate, p = 0.0012, p = 0.0052 vs those without and vs controls, respectively). Accuracy for detecting cardiac involvement was 86% for delayed H/M and washout rate and 79% for early H/M and B-type natriuretic peptide (BNP). Kaplan-Meier analysis showed significantly lower cardiac event-free rates in patients with early H/M {<=} 2.18 and BNP > 21.8 pg/ml than those with early H/M > 2.18 and BNP {<=} 21.8 pg/ml (log-rank test p = 0.006). Cardiac sympathetic nerve function was damaged in CSS patients with cardiac involvement. {sup 123}I-MIBG scintigraphy was useful in detecting cardiac involvement and in predicting cardiac events. (orig.)

Task types and error types involved in the human-related unplanned reactor trip events

International Nuclear Information System (INIS)

Kim, Jae Whan; Park, Jin Kyun

2008-01-01

In this paper, the contribution of task types and error types involved in the human-related unplanned reactor trip events that have occurred between 1986 and 2006 in Korean nuclear power plants are analysed in order to establish a strategy for reducing the human-related unplanned reactor trips. Classification systems for the task types, error modes, and cognitive functions are developed or adopted from the currently available taxonomies, and the relevant information is extracted from the event reports or judged on the basis of an event description. According to the analyses from this study, the contributions of the task types are as follows: corrective maintenance (25.7%), planned maintenance (22.8%), planned operation (19.8%), periodic preventive maintenance (14.9%), response to a transient (9.9%), and design/manufacturing/installation (6.9%). According to the analysis of the error modes, error modes such as control failure (22.2%), wrong object (18.5%), omission (14.8%), wrong action (11.1%), and inadequate (8.3%) take up about 75% of the total unplanned trip events. The analysis of the cognitive functions involved in the events indicated that the planning function had the highest contribution (46.7%) to the human actions leading to unplanned reactor trips. This analysis concludes that in order to significantly reduce human-induced or human-related unplanned reactor trips, an aide system (in support of maintenance personnel) for evaluating possible (negative) impacts of planned actions or erroneous actions as well as an appropriate human error prediction technique, should be developed

Task types and error types involved in the human-related unplanned reactor trip events

Energy Technology Data Exchange (ETDEWEB)

Kim, Jae Whan; Park, Jin Kyun [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2008-12-15

In this paper, the contribution of task types and error types involved in the human-related unplanned reactor trip events that have occurred between 1986 and 2006 in Korean nuclear power plants are analysed in order to establish a strategy for reducing the human-related unplanned reactor trips. Classification systems for the task types, error modes, and cognitive functions are developed or adopted from the currently available taxonomies, and the relevant information is extracted from the event reports or judged on the basis of an event description. According to the analyses from this study, the contributions of the task types are as follows: corrective maintenance (25.7%), planned maintenance (22.8%), planned operation (19.8%), periodic preventive maintenance (14.9%), response to a transient (9.9%), and design/manufacturing/installation (6.9%). According to the analysis of the error modes, error modes such as control failure (22.2%), wrong object (18.5%), omission (14.8%), wrong action (11.1%), and inadequate (8.3%) take up about 75% of the total unplanned trip events. The analysis of the cognitive functions involved in the events indicated that the planning function had the highest contribution (46.7%) to the human actions leading to unplanned reactor trips. This analysis concludes that in order to significantly reduce human-induced or human-related unplanned reactor trips, an aide system (in support of maintenance personnel) for evaluating possible (negative) impacts of planned actions or erroneous actions as well as an appropriate human error prediction technique, should be developed.

Global trends in infectious diseases at the wildlife-livestock interface.

Science.gov (United States)

Wiethoelter, Anke K; Beltrán-Alcrudo, Daniel; Kock, Richard; Mor, Siobhan M

2015-08-04

The role and significance of wildlife-livestock interfaces in disease ecology has largely been neglected, despite recent interest in animals as origins of emerging diseases in humans. Scoping review methods were applied to objectively assess the relative interest by the scientific community in infectious diseases at interfaces between wildlife and livestock, to characterize animal species and regions involved, as well as to identify trends over time. An extensive literature search combining wildlife, livestock, disease, and geographical search terms yielded 78,861 publications, of which 15,998 were included in the analysis. Publications dated from 1912 to 2013 and showed a continuous increasing trend, including a shift from parasitic to viral diseases over time. In particular there was a significant increase in publications on the artiodactyls-cattle and bird-poultry interface after 2002 and 2003, respectively. These trends could be traced to key disease events that stimulated public interest and research funding. Among the top 10 diseases identified by this review, the majority were zoonoses. Prominent wildlife-livestock interfaces resulted largely from interaction between phylogenetically closely related and/or sympatric species. The bird-poultry interface was the most frequently cited wildlife-livestock interface worldwide with other interfaces reflecting regional circumstances. This review provides the most comprehensive overview of research on infectious diseases at the wildlife-livestock interface to date.

Global trends in infectious diseases at the wildlife–livestock interface

Science.gov (United States)

Wiethoelter, Anke K.; Beltrán-Alcrudo, Daniel; Kock, Richard; Mor, Siobhan M.

2015-01-01

The role and significance of wildlife–livestock interfaces in disease ecology has largely been neglected, despite recent interest in animals as origins of emerging diseases in humans. Scoping review methods were applied to objectively assess the relative interest by the scientific community in infectious diseases at interfaces between wildlife and livestock, to characterize animal species and regions involved, as well as to identify trends over time. An extensive literature search combining wildlife, livestock, disease, and geographical search terms yielded 78,861 publications, of which 15,998 were included in the analysis. Publications dated from 1912 to 2013 and showed a continuous increasing trend, including a shift from parasitic to viral diseases over time. In particular there was a significant increase in publications on the artiodactyls–cattle and bird–poultry interface after 2002 and 2003, respectively. These trends could be traced to key disease events that stimulated public interest and research funding. Among the top 10 diseases identified by this review, the majority were zoonoses. Prominent wildlife–livestock interfaces resulted largely from interaction between phylogenetically closely related and/or sympatric species. The bird–poultry interface was the most frequently cited wildlife–livestock interface worldwide with other interfaces reflecting regional circumstances. This review provides the most comprehensive overview of research on infectious diseases at the wildlife–livestock interface to date. PMID:26195733

When hard times take a toll: the distressing consequences of economic hardship and life events within the family-work interface.

Science.gov (United States)

Young, Marisa; Schieman, Scott

2012-03-01

Using two waves of data from a national survey of working Americans (N = 1,122), we examine the associations among economic hardship, negative life events, and psychological distress in the context of the family-work interface. Our findings demonstrate that family-to-work conflict mediates the effects of economic hardship and negative events to significant others on distress (net of baseline distress and hardship). Moreover, economic hardship and negative events to significant others moderate the association between family-to-work conflict and distress. While negative events to others exacerbate the positive effect of family-to-work conflict on distress, we find the opposite for economic hardship: The positive association between hardship and distress is weaker at higher levels of family-to-work conflict. These patterns hold across an array of family, work, and sociodemographic conditions. We discuss how these findings refine and extend ideas of the stress process model, including complex predictions related to processes of stress-buffering, resource substitution, and role multiplication.

Fra COP15 til Copenhagen Fashion Week:Involvering af brugere i udvikling af event applikationer

OpenAIRE

Sørensen, Lene Tolstrup

2010-01-01

Mobile application has become an important parameter when it comes to presenting possibilities for small handheld devices such as mobile phones. One of the trends within mobile application development is applications for special events such as sports, conferences and TV shows. The purpose of this paper is to present and discuss the challenges of developing event applications with a strong involvement of users. The concepts and characteristics of the Living Lab approach has been used to develo...

The management of interfaces between organizations involved with the construction of Sizewell 'B'

International Nuclear Information System (INIS)

Butler, P.H.; Salmons, B.H.

1990-01-01

The overall organisation for the design, construction and commissioning of Sizewell 'B' is described, together with the specific responsibilities of the organisations involved. The paper describes how the parameters for each interface are identified, and how the formal arrangements for controlling transmission of information and material are handled. Whilst each organisation will perceive quality achievement as the ultimate objective, the specific individual responsibilities may dictate different, and sometimes opposing mechanisms for implementation, due to different perceptions of priority. The PWR Project Group has the ultimate responsibility for building Sizewell 'B' to cost and schedule and to the specified quality, and the paper describes, with some examples, how the different perceptions are addressed in order to achieve the ultimate objective. (author)

User interface support

Science.gov (United States)

Lewis, Clayton; Wilde, Nick

1989-01-01

Space construction will require heavy investment in the development of a wide variety of user interfaces for the computer-based tools that will be involved at every stage of construction operations. Using today's technology, user interface development is very expensive for two reasons: (1) specialized and scarce programming skills are required to implement the necessary graphical representations and complex control regimes for high-quality interfaces; (2) iteration on prototypes is required to meet user and task requirements, since these are difficult to anticipate with current (and foreseeable) design knowledge. We are attacking this problem by building a user interface development tool based on extensions to the spreadsheet model of computation. The tool provides high-level support for graphical user interfaces and permits dynamic modification of interfaces, without requiring conventional programming concepts and skills.

Design of a Scalable Event Notification Service: Interface and Architecture

National Research Council Canada - National Science Library

Carzaniga, Antonio; Rosenblum, David S; Wolf, Alexander L

1998-01-01

Event-based distributed systems are programmed to operate in response to events. An event notification service is an application-independent infrastructure that supports the construction of event-based systems...

Adverse Events Involving Radiation Oncology Medical Devices: Comprehensive Analysis of US Food and Drug Administration Data, 1991 to 2015

International Nuclear Information System (INIS)

Connor, Michael J.; Marshall, Deborah C.; Moiseenko, Vitali; Moore, Kevin; Cervino, Laura; Atwood, Todd; Sanghvi, Parag; Mundt, Arno J.; Pawlicki, Todd; Recht, Abram; Hattangadi-Gluth, Jona A.

2017-01-01

Purpose: Radiation oncology relies on rapidly evolving technology and highly complex processes. The US Food and Drug Administration collects reports of adverse events related to medical devices. We sought to characterize all events involving radiation oncology devices (RODs) from the US Food and Drug Administration's postmarket surveillance Manufacturer and User Facility Device Experience (MAUDE) database, comparing these with non–radiation oncology devices. Methods and Materials: MAUDE data on RODs from 1991 to 2015 were sorted into 4 product categories (external beam, brachytherapy, planning systems, and simulation systems) and 5 device problem categories (software, mechanical, electrical, user error, and dose delivery impact). Outcomes included whether the device was evaluated by the manufacturer, adverse event type, remedial action, problem code, device age, and time since 510(k) approval. Descriptive statistics were performed with linear regression of time-series data. Results for RODs were compared with those for other devices by the Pearson χ"2 test for categorical data and 2-sample Kolmogorov-Smirnov test for distributions. Results: There were 4234 ROD and 4,985,698 other device adverse event reports. Adverse event reports increased over time, and events involving RODs peaked in 2011. Most ROD reports involved external beam therapy (50.8%), followed by brachytherapy (24.9%) and treatment planning systems (21.6%). The top problem types were software (30.4%), mechanical (20.9%), and user error (20.4%). RODs differed significantly from other devices in each outcome (P<.001). RODs were more likely to be evaluated by the manufacturer after an event (46.9% vs 33.0%) but less likely to be recalled (10.5% vs 37.9%) (P<.001). Device age and time since 510(k) approval were shorter among RODs (P<.001). Conclusions: Compared with other devices, RODs may experience adverse events sooner after manufacture and market approval. Close postmarket surveillance, improved

Adverse Events Involving Radiation Oncology Medical Devices: Comprehensive Analysis of US Food and Drug Administration Data, 1991 to 2015

Energy Technology Data Exchange (ETDEWEB)

Connor, Michael J. [Department of Radiation Medicine and Applied Sciences, University of California San Diego, La Jolla, California (United States); Department of Radiation Oncology, University of California Irvine School of Medicine, Irvine, California (United States); Marshall, Deborah C.; Moiseenko, Vitali; Moore, Kevin; Cervino, Laura; Atwood, Todd; Sanghvi, Parag; Mundt, Arno J.; Pawlicki, Todd [Department of Radiation Medicine and Applied Sciences, University of California San Diego, La Jolla, California (United States); Recht, Abram [Department of Radiation Oncology, Beth Israel Deaconess Medical Center, Harvard Medical School, Boston, Massachusetts (United States); Hattangadi-Gluth, Jona A., E-mail: jhattangadi@ucsd.edu [Department of Radiation Medicine and Applied Sciences, University of California San Diego, La Jolla, California (United States)

2017-01-01

Purpose: Radiation oncology relies on rapidly evolving technology and highly complex processes. The US Food and Drug Administration collects reports of adverse events related to medical devices. We sought to characterize all events involving radiation oncology devices (RODs) from the US Food and Drug Administration's postmarket surveillance Manufacturer and User Facility Device Experience (MAUDE) database, comparing these with non–radiation oncology devices. Methods and Materials: MAUDE data on RODs from 1991 to 2015 were sorted into 4 product categories (external beam, brachytherapy, planning systems, and simulation systems) and 5 device problem categories (software, mechanical, electrical, user error, and dose delivery impact). Outcomes included whether the device was evaluated by the manufacturer, adverse event type, remedial action, problem code, device age, and time since 510(k) approval. Descriptive statistics were performed with linear regression of time-series data. Results for RODs were compared with those for other devices by the Pearson χ{sup 2} test for categorical data and 2-sample Kolmogorov-Smirnov test for distributions. Results: There were 4234 ROD and 4,985,698 other device adverse event reports. Adverse event reports increased over time, and events involving RODs peaked in 2011. Most ROD reports involved external beam therapy (50.8%), followed by brachytherapy (24.9%) and treatment planning systems (21.6%). The top problem types were software (30.4%), mechanical (20.9%), and user error (20.4%). RODs differed significantly from other devices in each outcome (P<.001). RODs were more likely to be evaluated by the manufacturer after an event (46.9% vs 33.0%) but less likely to be recalled (10.5% vs 37.9%) (P<.001). Device age and time since 510(k) approval were shorter among RODs (P<.001). Conclusions: Compared with other devices, RODs may experience adverse events sooner after manufacture and market approval. Close postmarket surveillance

Hierarchy of on-orbit servicing interfaces

Science.gov (United States)

Moe, Rud V.

1989-01-01

A series of equipment interfaces is involved in on-orbit servicing operations. The end-to-end hierarchy of servicing interfaces is presented. The interface concepts presented include structure and handling, and formats for transfer of resources (power, data, fluids, etc.). Consequences on cost, performance, and service ability of the use of standard designs or unique designs with interface adapters are discussed. Implications of the interface designs compatibility with remote servicing using telerobotic servicers are discussed.

MER SPICE Interface

Science.gov (United States)

Sayfi, Elias

2004-01-01

MER SPICE Interface is a software module for use in conjunction with the Mars Exploration Rover (MER) mission and the SPICE software system of the Navigation and Ancillary Information Facility (NAIF) at NASA's Jet Propulsion Laboratory. (SPICE is used to acquire, record, and disseminate engineering, navigational, and other ancillary data describing circumstances under which data were acquired by spaceborne scientific instruments.) Given a Spacecraft Clock value, MER SPICE Interface extracts MER-specific data from SPICE kernels (essentially, raw data files) and calculates values for Planet Day Number, Local Solar Longitude, Local Solar Elevation, Local Solar Azimuth, and Local Solar Time (UTC). MER SPICE Interface was adapted from a subroutine, denoted m98SpiceIF written by Payam Zamani, that was intended to calculate SPICE values for the Mars Polar Lander. The main difference between MER SPICE Interface and m98SpiceIf is that MER SPICE Interface does not explicitly call CHRONOS, a time-conversion program that is part of a library of utility subprograms within SPICE. Instead, MER SPICE Interface mimics some portions of the CHRONOS code, the advantage being that it executes much faster and can efficiently be called from a pipeline of events in a parallel processing environment.

Cortical excitability correlates with the event-related desynchronization during brain-computer interface control

Science.gov (United States)

Daly, Ian; Blanchard, Caroline; Holmes, Nicholas P.

2018-04-01

Objective. Brain-computer interfaces (BCIs) based on motor control have been suggested as tools for stroke rehabilitation. Some initial successes have been achieved with this approach, however the mechanism by which they work is not yet fully understood. One possible part of this mechanism is a, previously suggested, relationship between the strength of the event-related desynchronization (ERD), a neural correlate of motor imagination and execution, and corticospinal excitability. Additionally, a key component of BCIs used in neurorehabilitation is the provision of visual feedback to positively reinforce attempts at motor control. However, the ability of visual feedback of the ERD to modulate the activity in the motor system has not been fully explored. Approach. We investigate these relationships via transcranial magnetic stimulation delivered at different moments in the ongoing ERD related to hand contraction and relaxation during BCI control of a visual feedback bar. Main results. We identify a significant relationship between ERD strength and corticospinal excitability, and find that our visual feedback does not affect corticospinal excitability. Significance. Our results imply that efforts to promote functional recovery in stroke by targeting increases in corticospinal excitability may be aided by accounting for the time course of the ERD.

Optimal design method for a digital human–computer interface based on human reliability in a nuclear power plant. Part 3: Optimization method for interface task layout

International Nuclear Information System (INIS)

Jiang, Jianjun; Wang, Yiqun; Zhang, Li; Xie, Tian; Li, Min; Peng, Yuyuan; Wu, Daqing; Li, Peiyao; Ma, Congmin; Shen, Mengxu; Wu, Xing; Weng, Mengyun; Wang, Shiwei; Xie, Cen

2016-01-01

Highlights: • The authors present an optimization algorithm for interface task layout. • The performing process of the proposed algorithm was depicted. • The performance evaluation method adopted neural network method. • The optimization layouts of an event interface tasks were obtained by experiments. - Abstract: This is the last in a series of papers describing the optimal design for a digital human–computer interface of a nuclear power plant (NPP) from three different points based on human reliability. The purpose of this series is to propose different optimization methods from varying perspectives to decrease human factor events that arise from the defects of a human–computer interface. The present paper mainly solves the optimization method as to how to effectively layout interface tasks into different screens. The purpose of this paper is to decrease human errors by reducing the distance that an operator moves among different screens in each operation. In order to resolve the problem, the authors propose an optimization process of interface task layout for digital human–computer interface of a NPP. As to how to automatically layout each interface task into one of screens in each operation, the paper presents a shortest moving path optimization algorithm with dynamic flag based on human reliability. To test the algorithm performance, the evaluation method uses neural network based on human reliability. The less the human error probabilities are, the better the interface task layouts among different screens are. Thus, by analyzing the performance of each interface task layout, the optimization result is obtained. Finally, the optimization layouts of spurious safety injection event interface tasks of the NPP are obtained by an experiment, the proposed methods has a good accuracy and stabilization.

An interface energy density-based theory considering the coherent interface effect in nanomaterials

Science.gov (United States)

Yao, Yin; Chen, Shaohua; Fang, Daining

2017-02-01

To characterize the coherent interface effect conveniently and feasibly in nanomaterials, a continuum theory is proposed that is based on the concept of the interface free energy density, which is a dominant factor affecting the mechanical properties of the coherent interface in materials of all scales. The effect of the residual strain caused by self-relaxation and the lattice misfit of nanomaterials, as well as that due to the interface deformation induced by an external load on the interface free energy density is considered. In contrast to the existing theories, the stress discontinuity at the interface is characterized by the interface free energy density through an interface-induced traction. As a result, the interface elastic constant introduced in previous theories, which is not easy to determine precisely, is avoided in the present theory. Only the surface energy density of the bulk materials forming the interface, the relaxation parameter induced by surface relaxation, and the mismatch parameter for forming a coherent interface between the two surfaces are involved. All the related parameters are far easier to determine than the interface elastic constants. The effective bulk and shear moduli of a nanoparticle-reinforced nanocomposite are predicted using the proposed theory. Closed-form solutions are achieved, demonstrating the feasibility and convenience of the proposed model for predicting the interface effect in nanomaterials.

Fast scalar data buffering interface in Linux 2.6 kernel

International Nuclear Information System (INIS)

Homs, A.

2012-01-01

Key instrumentation devices like counter/timers, analog-to-digital converters and encoders provide scalar data input. Many of them allow fast acquisitions, but do not provide hardware triggering or buffering mechanisms. A Linux 2.4 kernel driver called Hook was developed at the ESRF as a generic software-triggered buffering interface. This work presents the portage of the ESRF Hook interface to the Linux 2.6 kernel. The interface distinguishes 2 independent functional groups: trigger event generators and data channels. Devices in the first group create software events, like hardware interrupts generated by timers or external signals. On each event, one or more device channels on the second group are read and stored in kernel buffers. The event generators and data channels to be read are fully configurable before each sequence. Designed for fast acquisitions, the Hook implementation is well adapted to multi-CPU systems, where the interrupt latency is notably reduced. On heavily loaded dual-core PCs running standard (non real time) Linux, data can be taken at 1 KHz without losing events. Additional features include full integration into the /sys virtual file-system and hot-plug devices support. (author)

DEVS representation of dynamical systems - Event-based intelligent control. [Discrete Event System Specification

Science.gov (United States)

Zeigler, Bernard P.

1989-01-01

It is shown how systems can be advantageously represented as discrete-event models by using DEVS (discrete-event system specification), a set-theoretic formalism. Such DEVS models provide a basis for the design of event-based logic control. In this control paradigm, the controller expects to receive confirming sensor responses to its control commands within definite time windows determined by its DEVS model of the system under control. The event-based contral paradigm is applied in advanced robotic and intelligent automation, showing how classical process control can be readily interfaced with rule-based symbolic reasoning systems.

Analysis of risk reduction methods for interfacing system LOCAs [loss-of-coolant accidents] at PWRs

International Nuclear Information System (INIS)

Bozoki, G.; Kohut, P.; Fitzpatrick, R.

1988-01-01

The Reactor Safety Study (WASH-1400) predicted that Interfacing System Loss-of-Coolant Accidents (ISL) events were significant contributors to risk even though they were calculated to be relatively low frequency events. However, there are substantial uncertainties involved in determining the probability and consequences of the ISL sequences. For example, the assumed valve failure modes, common cause contributions and the location of the break/leak are all uncertain and can significantly influence the predicted risk from ISL events. In order to provide more realistic estimates for the core damage frequencies (CDFs) and a reduction in the magnitude of the uncertainties, a reexamination of ISL scenarios at PWRs has been performed by Brookhaven National Laboratory. The objective of this study was to investigate the vulnerability of pressurized water reactor designs to ISLs and identify any improvements that could significantly reduce the frequency/risk of these events

Brain-computer interface training combined with transcranial direct current stimulation in patients with chronic severe hemiparesis: Proof of concept study.

Science.gov (United States)

Kasashima-Shindo, Yuko; Fujiwara, Toshiyuki; Ushiba, Junichi; Matsushika, Yayoi; Kamatani, Daiki; Oto, Misa; Ono, Takashi; Nishimoto, Atsuko; Shindo, Keiichiro; Kawakami, Michiyuki; Tsuji, Tetsuya; Liu, Meigen

2015-04-01

Brain-computer interface technology has been applied to stroke patients to improve their motor function. Event-related desynchronization during motor imagery, which is used as a brain-computer interface trigger, is sometimes difficult to detect in stroke patients. Anodal transcranial direct current stimulation (tDCS) is known to increase event-related desynchronization. This study investigated the adjunctive effect of anodal tDCS for brain-computer interface training in patients with severe hemiparesis. Eighteen patients with chronic stroke. A non-randomized controlled study. Subjects were divided between a brain-computer interface group and a tDCS- brain-computer interface group and participated in a 10-day brain-computer interface training. Event-related desynchronization was detected in the affected hemisphere during motor imagery of the affected fingers. The tDCS-brain-computer interface group received anodal tDCS before brain-computer interface training. Event-related desynchronization was evaluated before and after the intervention. The Fugl-Meyer Assessment upper extremity motor score (FM-U) was assessed before, immediately after, and 3 months after, the intervention. Event-related desynchronization was significantly increased in the tDCS- brain-computer interface group. The FM-U was significantly increased in both groups. The FM-U improvement was maintained at 3 months in the tDCS-brain-computer interface group. Anodal tDCS can be a conditioning tool for brain-computer interface training in patients with severe hemiparetic stroke.

PyRETIS: A well-done, medium-sized python library for rare events.

Science.gov (United States)

Lervik, Anders; Riccardi, Enrico; van Erp, Titus S

2017-10-30

Transition path sampling techniques are becoming common approaches in the study of rare events at the molecular scale. More efficient methods, such as transition interface sampling (TIS) and replica exchange transition interface sampling (RETIS), allow the investigation of rare events, for example, chemical reactions and structural/morphological transitions, in a reasonable computational time. Here, we present PyRETIS, a Python library for performing TIS and RETIS simulations. PyRETIS directs molecular dynamics (MD) simulations in order to sample rare events with unbiased dynamics. PyRETIS is designed to be easily interfaced with any molecular simulation package and in the present release, it has been interfaced with GROMACS and CP2K, for classical and ab initio MD simulations, respectively. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Rapid prototyping 3D virtual world interfaces within a virtual factory environment

Science.gov (United States)

Kosta, Charles Paul; Krolak, Patrick D.

1993-01-01

On-going work into user requirements analysis using CLIPS (NASA/JSC) expert systems as an intelligent event simulator has led to research into three-dimensional (3D) interfaces. Previous work involved CLIPS and two-dimensional (2D) models. Integral to this work was the development of the University of Massachusetts Lowell parallel version of CLIPS, called PCLIPS. This allowed us to create both a Software Bus and a group problem-solving environment for expert systems development. By shifting the PCLIPS paradigm to use the VEOS messaging protocol we have merged VEOS (HlTL/Seattle) and CLIPS into a distributed virtual worlds prototyping environment (VCLIPS). VCLIPS uses the VEOS protocol layer to allow multiple experts to cooperate on a single problem. We have begun to look at the control of a virtual factory. In the virtual factory there are actors and objects as found in our Lincoln Logs Factory of the Future project. In this artificial reality architecture there are three VCLIPS entities in action. One entity is responsible for display and user events in the 3D virtual world. Another is responsible for either simulating the virtual factory or communicating with the real factory. The third is a user interface expert. The interface expert maps user input levels, within the current prototype, to control information for the factory. The interface to the virtual factory is based on a camera paradigm. The graphics subsystem generates camera views of the factory on standard X-Window displays. The camera allows for view control and object control. Control or the factory is accomplished by the user reaching into the camera views to perform object interactions. All communication between the separate CLIPS expert systems is done through VEOS.

Top quark event modelling and generators

CERN Document Server

Rahmat, Rahmat

2016-01-01

State-of-the-art theoretical predictions accurate to next-to-leading order QCD interfaced with Pythia8 and Herwig++ event generators are tested by comparing the unfolded ttbar differential data collected with the CMS detector at 8 TeV. These predictions are also compared with the underlying event activity distributions in ttbar events using CMS proton-proton data collected in 2015 at a center of mass energy of 13 TeV.

Electrical Breakdown Phenomena Involving Material Interfaces

Science.gov (United States)

2013-06-01

create ozone through chemical reactions involving reactive species created by the electrical discharge [3]. The glow discharge breakdown in such...2. REPORT TYPE N/A 3. DATES COVERED - 4. TITLE AND SUBTITLE Investigation Of Pre-Ionization And Atmospheric Pulsed Discharge Plasma 5a...growth of the air discharge in the form of a conductive filament consisting of electrons and ions. This filament is created by temporal pulse that

Detector and event visualization with sketchup at the CMS experiment

International Nuclear Information System (INIS)

Sakuma, Tai; McCauley, Thomas

2014-01-01

We have created 3D models of the CMS detector and particle collision events in SketchUp, a 3D modelling program. SketchUp provides a Ruby API which we use to interface with the CMS Detector Description to create 3D models of the CMS detector. With the Ruby API, we also have created an interface to the JSON-based event format used for the iSpy event display to create 3D models of CMS events. These models have many applications related to 3D representation of the CMS detector and events. Figures produced based on these models were used in conference presentations, journal publications, technical design reports for the detector upgrades, art projects, outreach programs, and other presentations

Biomimetic approaches with smart interfaces for bone regeneration.

Science.gov (United States)

Sailaja, G S; Ramesh, P; Vellappally, Sajith; Anil, Sukumaran; Varma, H K

2016-11-05

A 'smart tissue interface' is a host tissue-biomaterial interface capable of triggering favourable biochemical events inspired by stimuli responsive mechanisms. In other words, biomaterial surface is instrumental in dictating the interface functionality. This review aims to investigate the fundamental and favourable requirements of a 'smart tissue interface' that can positively influence the degree of healing and promote bone tissue regeneration. A biomaterial surface when interacts synergistically with the dynamic extracellular matrix, the healing process become accelerated through development of a smart interface. The interface functionality relies equally on bound functional groups and conjugated molecules belonging to the biomaterial and the biological milieu it interacts with. The essential conditions for such a special biomimetic environment are discussed. We highlight the impending prospects of smart interfaces and trying to relate the design approaches as well as critical factors that determine species-specific functionality with special reference to bone tissue regeneration.

KNOWBOT: a self-organizing interface for nuclear data bases

International Nuclear Information System (INIS)

Heger, A.S.; Koen, B.V.

1988-01-01

This paper describes the development of a practical intelligent associate, KNOWBOT, designed to act as a surrogate for engineers and scientists in accessing nuclear power industry data bases. The nuclear power industry has developed several safety and reliability data bases to facilitate the exchange of significant safety-related data for enhancement of its performance. The nuclear plant reliability data system and the licensee event reports are instances of such data bases. The creation of these data bases has, nevertheless, been paradoxical. They have provided rapid access to the needed data. Yet they have, at the same time, created their own impediments. Two of these problems that are addressed by the design of KNOWBOT are the interface and dimensionality. The interface problem falls in the broader category of man/machine interaction, which deals with the problems involved with this symbiosis. Dimensionality deals with the rapidly increasing sizes of the data bases and their ability to process queries in a timely fashion. Numerous programs have been developed to address the interface problem, but most have proven inadequate in real-time applications. The dimensionality problem has been approached through the development of faster processors and query optimizers. As these data bases continue to expand, the present solutions are reaching their performance limits, and a new approach such as that offered by KNOWBOT is needed

How to Cope with the Rare Human Error Events Involved with organizational Factors in Nuclear Power Plants

Energy Technology Data Exchange (ETDEWEB)

Kim, Sa Kil; Luo, Meiling; Lee, Yong Hee [Korea Atomic Research Institute, Daejeon (Korea, Republic of)

2014-10-15

The current human error guidelines (e.g. US DOD handbooks, US NRC Guidelines) are representative tools to prevent human errors. These tools, however, have limits that they do not adapt all operating situations and circumstances such as design base events. In other words, these tools are only adapted foreseeable standardized operating situations and circumstances. In this study, our research team proposed an evidence-based approach such as UK's safety case to coping with the rare human error events such as TMI, Chernobyl, Fukushima accidents. These accidents are representative events involved with rare human errors. Our research team defined the 'rare human errors' as the follow three characterized events; Extremely low frequency Extremely high complicated structure Extremely serious damage of human life and property A safety case is a structured argument, supported by evidence, intended to justify that a system is acceptably safe. The definition by UK defense standard 00-56 issue 4 states that such an evidence-based approach can be contrast with a prescriptive approach to safety certification, which require safety to be justified using a prescribed process. Safety managements and safety regulatory activities based on safety case are effective to control organizational factors in terms of integrated safety management. Especially safety issues relevant with public acceptance are useful to provide practical evidences to the public reasonably. European Union including UK has developed the concept of engineered safety management system to deal with public acceptance using the safety case. In Korea nuclear industry, the Korean Atomic Research Institute has firstly performed a basic research to adapt the safety case in the field of radioactive waste according to the IAEA SSG-23(KAERI/TR-4497, 4531). Excepting the radioactive waste, there is no try to adapt the safety case yet. Most incidents and accidents involved human during operating NPPs have a tendency

How to Cope with the Rare Human Error Events Involved with organizational Factors in Nuclear Power Plants

International Nuclear Information System (INIS)

Kim, Sa Kil; Luo, Meiling; Lee, Yong Hee

2014-01-01

The current human error guidelines (e.g. US DOD handbooks, US NRC Guidelines) are representative tools to prevent human errors. These tools, however, have limits that they do not adapt all operating situations and circumstances such as design base events. In other words, these tools are only adapted foreseeable standardized operating situations and circumstances. In this study, our research team proposed an evidence-based approach such as UK's safety case to coping with the rare human error events such as TMI, Chernobyl, Fukushima accidents. These accidents are representative events involved with rare human errors. Our research team defined the 'rare human errors' as the follow three characterized events; Extremely low frequency Extremely high complicated structure Extremely serious damage of human life and property A safety case is a structured argument, supported by evidence, intended to justify that a system is acceptably safe. The definition by UK defense standard 00-56 issue 4 states that such an evidence-based approach can be contrast with a prescriptive approach to safety certification, which require safety to be justified using a prescribed process. Safety managements and safety regulatory activities based on safety case are effective to control organizational factors in terms of integrated safety management. Especially safety issues relevant with public acceptance are useful to provide practical evidences to the public reasonably. European Union including UK has developed the concept of engineered safety management system to deal with public acceptance using the safety case. In Korea nuclear industry, the Korean Atomic Research Institute has firstly performed a basic research to adapt the safety case in the field of radioactive waste according to the IAEA SSG-23(KAERI/TR-4497, 4531). Excepting the radioactive waste, there is no try to adapt the safety case yet. Most incidents and accidents involved human during operating NPPs have a tendency

The Monte Carlo event generator AcerMC versions 2.0 to 3.8 with interfaces to PYTHIA 6.4, HERWIG 6.5 and ARIADNE 4.1

Science.gov (United States)

Kersevan, Borut Paul; Richter-Waş, Elzbieta

2013-03-01

The AcerMC Monte Carlo generator is dedicated to the generation of Standard Model background processes which were recognised as critical for the searches at LHC, and generation of which was either unavailable or not straightforward so far. The program itself provides a library of the massive matrix elements (coded by MADGRAPH) and native phase space modules for generation of a set of selected processes. The hard process event can be completed by the initial and the final state radiation, hadronisation and decays through the existing interface with either PYTHIA, HERWIG or ARIADNE event generators and (optionally) TAUOLA and PHOTOS. Interfaces to all these packages are provided in the distribution version. The phase-space generation is based on the multi-channel self-optimising approach using the modified Kajantie-Byckling formalism for phase space construction and further smoothing of the phase space was obtained by using a modified ac-VEGAS algorithm. An additional improvement in the recent versions is the inclusion of the consistent prescription for matching the matrix element calculations with parton showering for a select list of processes. Catalogue identifier: ADQQ_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADQQ_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 3853309 No. of bytes in distributed program, including test data, etc.: 68045728 Distribution format: tar.gz Programming language: FORTRAN 77 with popular extensions (g77, gfortran). Computer: All running Linux. Operating system: Linux. Classification: 11.2, 11.6. External routines: CERNLIB (http://cernlib.web.cern.ch/cernlib/), LHAPDF (http://lhapdf.hepforge.org/) Catalogue identifier of previous version: ADQQ_v1_0 Journal reference of previous version: Comput. Phys. Comm. 149(2003)142 Does

Viral fitness does not correlate with three genotype displacement events involving infectious hematopoietic necrosis virus

Science.gov (United States)

Kell, Alison M.; Wargo, Andrew R.; Kurath, Gael

2014-01-01

Viral genotype displacement events are characterized by the replacement of a previously dominant virus genotype by a novel genotype of the same virus species in a given geographic region. We examine here the fitness of three pairs of infectious hematopoietic necrosis virus (IHNV) genotypes involved in three major genotype displacement events in Washington state over the last 30 years to determine whether increased virus fitness correlates with displacement. Fitness was assessed using in vivo assays to measure viral replication in single infection, simultaneous co-infection, and sequential superinfection in the natural host, steelhead trout. In addition, virion stability of each genotype was measured in freshwater and seawater environments at various temperatures. By these methods, we found no correlation between increased viral fitness and displacement in the field. These results suggest that other pressures likely exist in the field with important consequences for IHNV evolution.

Web-Based Interface for Command and Control of Network Sensors

Science.gov (United States)

Wallick, Michael N.; Doubleday, Joshua R.; Shams, Khawaja S.

2010-01-01

This software allows for the visualization and control of a network of sensors through a Web browser interface. It is currently being deployed for a network of sensors monitoring Mt. Saint Helen s volcano; however, this innovation is generic enough that it can be deployed for any type of sensor Web. From this interface, the user is able to fully control and monitor the sensor Web. This includes, but is not limited to, sending "test" commands to individual sensors in the network, monitoring for real-world events, and reacting to those events

Polymers and biopolymers at interfaces

Science.gov (United States)

Hall, A. R.; Geoghegan, M.

2018-03-01

This review updates recent progress in the understanding of the behaviour of polymers at surfaces and interfaces, highlighting examples in the areas of wetting, dewetting, crystallization, and ‘smart’ materials. Recent developments in analysis tools have yielded a large increase in the study of biological systems, and some of these will also be discussed, focussing on areas where surfaces are important. These areas include molecular binding events and protein adsorption as well as the mapping of the surfaces of cells. Important techniques commonly used for the analysis of surfaces and interfaces are discussed separately to aid the understanding of their application.

Diffuse-Interface Methods in Fluid Mechanics

Science.gov (United States)

Anderson, D. M.; McFadden, G. B.; Wheeler, A. A.

1997-01-01

The authors review the development of diffuse-interface models of hydrodynamics and their application to a wide variety of interfacial phenomena. The authors discuss the issues involved in formulating diffuse-interface models for single-component and binary fluids. Recent applications and computations using these models are discussed in each case. Further, the authors address issues including sharp-interface analyses that relate these models to the classical free-boundary problem, related computational approaches to describe interfacial phenomena, and related approaches describing fully-miscible fluids.

The FTK to Level-2 Interface Card (FLIC)

CERN Document Server

Wang, R.; The ATLAS collaboration; Auerbach, Benjamin; Blair, Robert; Drake, Gary; Love, Jeremy; Proudfoot, James; Anderson, J.; Zhang, Jinlong

2016-01-01

The FTK to Level-2 Interface Card (FLIC) of the ATLAS Fast TracKer (FTK) trigger upgrade is the final component in the FTK chain of custom electronics. The FTK performs full event tracking using the ATLAS Silicon detectors for every Level-1(L1) accepted event at 100 kHz. The FLIC is a custom Advanced Telecommunications Architecture (ATCA) card that interfaces the upstream FTK system with the ATLAS trigger and data acquisition (TDAQ) system, and allows for event processing on commercial PC blades making use of the 10 GB Ethernet full mesh ATCA back-plane. The FLIC receives data on 8 optical links at a bandwidth of about 1 Gbps per channel, reformats the data to the ATLAS standard record format, and performs the conversion from local to global module identifier using look up tables in SRAM. After processing, the event records are sent out to the TDAQ system using the S-LINK protocol at 2 Gbps, with a latency of O(10 microseconds). The data processing is handled in two Xilinx Virtex-6 FPGAs, with two additional ...

The FTK to Level-2 Interface Card (FLIC)

CERN Document Server

Anderson, John Thomas; The ATLAS collaboration; Drake, Gary; Love, Jeremy; Proudfoot, James; Wang, Rui; Zhang, Jinlong; Auerbach, Benjamin

2015-01-01

The FTK to Level-2 Interface Card (FLIC) of the ATLAS Fast TracKer (FTK) trigger upgrade is the final component in the FTK chain of custom electronics. The FTK performs full event tracking using the ATLAS Silicon detectors for every Level-1 accepted event at 100 kHz. The FLIC is a custom Advanced Telecommunications Architecture (ATCA) card that interfaces the upstream FTK system with the ATLAS trigger and data acquisition (TDAQ) system, and allows for event processing on commercial PC blades making use of the 10 GB Ethernet full mesh ATCA back-plane. The FLIC receives data on 8 optical links at a bandwidth of ~1 Gbps per channel, reformats the data to the ATLAS standard record format, and performs the conversion from local to global module identifier using look up tables in SRAM. After processing, the event records are sent out to the TDAQ system using the S-LINK protocol at 2 Gbps, with a latency of O(10 microseconds). The data processing is handled in two Xilinx Virtex-6 FPGAs, with two additional Virtex-6 ...

A new man-machine-interface at BESSY

International Nuclear Information System (INIS)

Mueller, R.; Doll, H.D.; Donasch, I.J.; Marxen, H.; Pause, H.

1991-01-01

A UIMS (user interface management system) has been developed, that is completely based on non-proprietary software. Central part of the UIMS are processes (mapper) that act as universal X-clients for each specified X-server. Mapper (graphic server) and applications (graphic clients) exchange requests by an event driven interface. The communication protocol is free from any graphical information. The most powerful mapper client is a form interpreter, that can be programmed to act as an equipment access server. Mapper and form interpreter allow to compose control panels and synoptic views of the machine with statements in a simple and comprehensible UIDL (user interface definition language)

Differences in Work-Related Adverse Events by Sex and Industry in Cases Involving Compensation for Mental Disorders and Suicide in Japan From 2010 to 2014.

Science.gov (United States)

Yamauchi, Takashi; Sasaki, Takeshi; Yoshikawa, Toru; Matsumoto, Shun; Takahashi, Masaya; Suka, Machi; Yanagisawa, Hiroyuki

2018-04-01

This study aimed to clarify whether work-related adverse events in cases involving compensation for mental disorders and suicide differ by sex and industry using a database containing all relevant cases reported from 2010 to 2014 in Japan. A total of 1362 eligible cases involving compensation for mental disorders (422 females and 940 males) were analyzed. Among males, 55.7% of cases were attributed to "long working hours." In both sexes, the frequencies of cases attributed to "long working hours" and other events differed significantly by industry. Among cases involving compensation for suicide, 71.4% were attributed to "long working hours." The frequency distribution of work-related adverse events differed significantly by sex and industry. These differences should be taken into consideration in the development of industry-specific preventive measures for occupational mental disorders.

NEBULAS A High Performance Data-Driven Event-Building Architecture based on an Asynchronous Self-Routing Packet-Switching Network

CERN Multimedia

Costa, M; Letheren, M; Djidi, K; Gustafsson, L; Lazraq, T; Minerskjold, M; Tenhunen, H; Manabe, A; Nomachi, M; Watase, Y

2002-01-01

RD31 : The project is evaluating a new approach to event building for level-two and level-three processor farms at high rate experiments. It is based on the use of commercial switching fabrics to replace the traditional bus-based architectures used in most previous data acquisition sytems. Switching fabrics permit the construction of parallel, expandable, hardware-driven event builders that can deliver higher aggregate throughput than the bus-based architectures. A standard industrial switching fabric technology is being evaluated. It is based on Asynchronous Transfer Mode (ATM) packet-switching network technology. Commercial, expandable ATM switching fabrics and processor interfaces, now being developed for the future Broadband ISDN infrastructure, could form the basis of an implementation. The goals of the project are to demonstrate the viability of this approach, to evaluate the trade-offs involved in make versus buy options, to study the interfacing of the physics frontend data buffers to such a fabric, a...

Visual search of cyclic spatio-temporal events

Science.gov (United States)

Gautier, Jacques; Davoine, Paule-Annick; Cunty, Claire

2018-05-01

The analysis of spatio-temporal events, and especially of relationships between their different dimensions (space-time-thematic attributes), can be done with geovisualization interfaces. But few geovisualization tools integrate the cyclic dimension of spatio-temporal event series (natural events or social events). Time Coil and Time Wave diagrams represent both the linear time and the cyclic time. By introducing a cyclic temporal scale, these diagrams may highlight the cyclic characteristics of spatio-temporal events. However, the settable cyclic temporal scales are limited to usual durations like days or months. Because of that, these diagrams cannot be used to visualize cyclic events, which reappear with an unusual period, and don't allow to make a visual search of cyclic events. Also, they don't give the possibility to identify the relationships between the cyclic behavior of the events and their spatial features, and more especially to identify localised cyclic events. The lack of possibilities to represent the cyclic time, outside of the temporal diagram of multi-view geovisualization interfaces, limits the analysis of relationships between the cyclic reappearance of events and their other dimensions. In this paper, we propose a method and a geovisualization tool, based on the extension of Time Coil and Time Wave, to provide a visual search of cyclic events, by allowing to set any possible duration to the diagram's cyclic temporal scale. We also propose a symbology approach to push the representation of the cyclic time into the map, in order to improve the analysis of relationships between space and the cyclic behavior of events.

200 Area TEDF interface control document

Energy Technology Data Exchange (ETDEWEB)

Brown, M.J.; Hildebrand, R.A.

1994-11-15

Because the TEDF does not have any treatment or retention capacity, strict control at the generator interface is essential to operate the TEDF in compliance with good engineering practices, Hanford site requirements, and the 216 Discharge Permit. The information in the Interface Control Document (ICD) forms the basis of understanding between all parties involved in the TEDF; DOE, WHC, and the generating facilities. The ICD defines the controlling document hierarchy; LEF, and generator responsibilities; monitoring and sampling requirements; and specifies the TEDF/Generator Interface points.

200 Area TEDF interface control document

International Nuclear Information System (INIS)

Brown, M.J.; Hildebrand, R.A.

1994-01-01

Because the TEDF does not have any treatment or retention capacity, strict control at the generator interface is essential to operate the TEDF in compliance with good engineering practices, Hanford site requirements, and the 216 Discharge Permit. The information in the Interface Control Document (ICD) forms the basis of understanding between all parties involved in the TEDF; DOE, WHC, and the generating facilities. The ICD defines the controlling document hierarchy; LEF, and generator responsibilities; monitoring and sampling requirements; and specifies the TEDF/Generator Interface points

Alignment of non-covalent interactions at protein-protein interfaces.

Directory of Open Access Journals (Sweden)

Hongbo Zhu

Full Text Available BACKGROUND: The study and comparison of protein-protein interfaces is essential for the understanding of the mechanisms of interaction between proteins. While there are many methods for comparing protein structures and protein binding sites, so far no methods have been reported for comparing the geometry of non-covalent interactions occurring at protein-protein interfaces. METHODOLOGY/PRINCIPAL FINDINGS: Here we present a method for aligning non-covalent interactions between different protein-protein interfaces. The method aligns the vector representations of van der Waals interactions and hydrogen bonds based on their geometry. The method has been applied to a dataset which comprises a variety of protein-protein interfaces. The alignments are consistent to a large extent with the results obtained using two other complementary approaches. In addition, we apply the method to three examples of protein mimicry. The method successfully aligns respective interfaces and allows for recognizing conserved interface regions. CONCLUSIONS/SIGNIFICANCE: The Galinter method has been validated in the comparison of interfaces in which homologous subunits are involved, including cases of mimicry. The method is also applicable to comparing interfaces involving non-peptidic compounds. Galinter assists users in identifying local interface regions with similar patterns of non-covalent interactions. This is particularly relevant to the investigation of the molecular basis of interaction mimicry.

A review of two recent occurrences at the Advanced Test Reactor involving subcontractor activities

International Nuclear Information System (INIS)

Dahlke, H.J.; Jensen, N.C.; Vail, J.A.

1997-11-01

This report documents the results of a brief, unofficial investigation into two incidents at the Idaho National Engineering and Environmental Laboratory (INEEL) Advanced Test Reactor (ATR) facility, reported on October 25 and 31, 1997. The first event was an unanticipated breach of confinement. The second involved reactor operation with an inoperable seismic scram subsystem, violating the reactor's Technical Specifications. These two incidents have been found to be unrelated. A third event that occurred on December 16, 1996, is also discussed because of its similarities to the first event listed above. Both of these incidents were unanticipated breaches of confinement, and both involved the work of construction subcontractor personnel. The cause for the subcontractor related occurrences is a work control process that fails to effectively interface with LMITCO management. ATR Construction Project managers work sufficient close with construction subcontractor personnel to understand planned day-to-day activities. They also have sufficient training and understanding of reactor operations to ensure adherence to applicable administrative requirements. However, they may not be sufficiently involved in the work authorization and control process to bridge an apparent communications gap between subcontractor employees and Facility Operations/functional support personnel for work inside the reactor facility. The cause for the inoperable seismic scram switch (resulting from a disconnected lead) is still under investigation. It does not appear to be subcontractor related

Time-recovering PCI-AER interface for bio-inspired spiking systems

Science.gov (United States)

Paz-Vicente, R.; Linares-Barranco, A.; Cascado, D.; Vicente, S.; Jimenez, G.; Civit, A.

2005-06-01

Address Event Representation (AER) is an emergent neuromorphic interchip communication protocol that allows for real-time virtual massive connectivity between huge number neurons located on different chips. By exploiting high speed digital communication circuits (with nano-seconds timings), synaptic neural connections can be time multiplexed, while neural activity signals (with mili-seconds timings) are sampled at low frequencies. Also, neurons generate 'events' according to their activity levels. More active neurons generate more events per unit time, and access the interchip communication channel more frequently, while neurons with low activity consume less communication bandwidth. When building multi-chip muti-layered AER systems it is absolutely necessary to have a computer interface that allows (a) to read AER interchip traffic into the computer and visualize it on screen, and (b) inject a sequence of events at some point of the AER structure. This is necessary for testing and debugging complex AER systems. This paper presents a PCI to AER interface, that dispatches a sequence of events received from the PCI bus with embedded timing information to establish when each event will be delivered. A set of specialized states machines has been introduced to recovery the possible time delays introduced by the asynchronous AER bus. On the input channel, the interface capture events assigning a timestamp and delivers them through the PCI bus to MATLAB applications. It has been implemented in real time hardware using VHDL and it has been tested in a PCI-AER board, developed by authors, that includes a Spartan II 200 FPGA. The demonstration hardware is currently capable to send and receive events at a peak rate of 8,3 Mev/sec, and a typical rate of 1 Mev/sec.

Toward brain-computer interface based wheelchair control utilizing tactually-evoked event-related potentials

Science.gov (United States)

2014-01-01

Background People with severe disabilities, e.g. due to neurodegenerative disease, depend on technology that allows for accurate wheelchair control. For those who cannot operate a wheelchair with a joystick, brain-computer interfaces (BCI) may offer a valuable option. Technology depending on visual or auditory input may not be feasible as these modalities are dedicated to processing of environmental stimuli (e.g. recognition of obstacles, ambient noise). Herein we thus validated the feasibility of a BCI based on tactually-evoked event-related potentials (ERP) for wheelchair control. Furthermore, we investigated use of a dynamic stopping method to improve speed of the tactile BCI system. Methods Positions of four tactile stimulators represented navigation directions (left thigh: move left; right thigh: move right; abdomen: move forward; lower neck: move backward) and N = 15 participants delivered navigation commands by focusing their attention on the desired tactile stimulus in an oddball-paradigm. Results Participants navigated a virtual wheelchair through a building and eleven participants successfully completed the task of reaching 4 checkpoints in the building. The virtual wheelchair was equipped with simulated shared-control sensors (collision avoidance), yet these sensors were rarely needed. Conclusion We conclude that most participants achieved tactile ERP-BCI control sufficient to reliably operate a wheelchair and dynamic stopping was of high value for tactile ERP classification. Finally, this paper discusses feasibility of tactile ERPs for BCI based wheelchair control. PMID:24428900

Safeguards Summary Event List (SSEL)

International Nuclear Information System (INIS)

1991-07-01

The Safeguards Summary Event List (SSEL) provides brief summaries of several hundred safeguards-related events involving nuclear material or facilities regulated by the US Nuclear Regulatory Commission (NRC). Because of public interest, the Miscellaneous category includes a few events which involve either source material, byproduct material, or natural uranium which are exempt from safeguards requirements. Events are described under the categories of bomb-related, intrusion, missing and/or allegedly stolen, transportation, tampering/vandalism, arson, firearms, radiological sabotage, nonradiological sabotage, pre-1990 alcohol and drugs (involving reactor operators, security force members, or management persons), and miscellaneous. The information contained in the event descriptions is derived primarily from official NRC reporting channels

Contributions to dataflow sub-system of the ATLAS data acquisition and event filter prototype-1 project

International Nuclear Information System (INIS)

Badescu, E.; Caprini, M.; Niculescu, M.; Radu, A.

1998-01-01

A project has been approved by the ATLAS Collaboration for the design and implementation of a Data Acquisition (DAQ) and Event Filter (EF) prototype. The prototype consists of a full 'vertical' slice of the ATLAS Data Acquisition and Event Filter architecture and can be seen as made of 4 sub-systems: the Detector Interface, the Dataflow, the Back-end DAQ and the Event Filter. The Bucharest group is member of DAQ/EF collaboration and during 1997 it was involved in the Dataflow activities. The Dataflow component of the ATLAS DAQ/EF prototype is responsible for moving the event data from the detector read-out links to the final mass storage. It also provides event data for monitoring purposes and implements local control for the various elements. The Dataflow system is designed to cover three main functions, namely: the collection and buffering of the data from the detector, the merging of fragments into full events and the interaction with event filter sub-farm. The event building function is covered by a Dataflow building block named Event Builder. All the other functions of the Dataflow system are covered by the two modular building blocks, the read-out crate (ROC) and the sub-farm DAQ (SFC). The Bucharest group was mainly involved in the activities related to the high level design, initial implementation and tests of the ROC supporting the read-out from one or more read-out drivers and having one or more connections to the event builder. The main data flow within the ROC is handled by three input/output modules named IOMs: the trigger module (TRG), the event builder interface module (EBIF) and the read-out buffer module (ROB). The TRG receives and buffers data control messages from level 1 and from level 2 trigger system, the EBIF builds fragments and makes them available to the event building sub-system and the ROB receives and buffers ROB fragments from the read-out link, S-LINK. In order to estimate the performance which could be achieved with the actual

Conference | The Big Bang and the interfaces of knowledge: towards a common understanding? | 11 November

CERN Multimedia

2015-01-01

The third in a series of conferences organised by CERN and Wilton Park, this event will once again bring together scientists, theologians and philosophers to discuss the themes of the nature and understanding of a common language, truth and logic.   Wednesday, 11 November at 4 p.m. in the Main Auditorium For more information and to register, click here. In 2012, CERN and Wilton Park hosted the pioneering international conference “The Big Bang and the interfaces of knowledge: towards a common language?”. The event was very successful and a follow-up conference was organised in June 2014 with the purpose of widening the spectrum of scientists, theologians and philosophers involved, continuing the dialogue on one of the key themes that emerged during the first meeting: the nature and the understanding of “truth”. A key theme emerging from the 2014 event was the nature and understanding of logic, and this third meeting will focu...

Distributed user interfaces for clinical ubiquitous computing applications.

Science.gov (United States)

Bång, Magnus; Larsson, Anders; Berglund, Erik; Eriksson, Henrik

2005-08-01

Ubiquitous computing with multiple interaction devices requires new interface models that support user-specific modifications to applications and facilitate the fast development of active workspaces. We have developed NOSTOS, a computer-augmented work environment for clinical personnel to explore new user interface paradigms for ubiquitous computing. NOSTOS uses several devices such as digital pens, an active desk, and walk-up displays that allow the system to track documents and activities in the workplace. We present the distributed user interface (DUI) model that allows standalone applications to distribute their user interface components to several devices dynamically at run-time. This mechanism permit clinicians to develop their own user interfaces and forms to clinical information systems to match their specific needs. We discuss the underlying technical concepts of DUIs and show how service discovery, component distribution, events and layout management are dealt with in the NOSTOS system. Our results suggest that DUIs--and similar network-based user interfaces--will be a prerequisite of future mobile user interfaces and essential to develop clinical multi-device environments.

Software programmable multi-mode interface for nuclear-medical imaging

International Nuclear Information System (INIS)

Zubal, I.G.; Rowe, R.W.; Bizais, Y.J.C.; Bennett, G.W.; Brill, A.B.

1982-01-01

An innovative multi-port interface allows gamma camera events (spatial coordinates and energy) to be acquired concurrently with a sampling of physiological patient data. The versatility of the interface permits all conventional static, dynamic, and tomographic imaging modes, in addition to multi-hole coded aperture acquisition. The acquired list mode data may be analyzed or gated on the basis of various camera, isotopic, or physiological parameters

Graphical programming interface: A development environment for MRI methods.

Science.gov (United States)

Zwart, Nicholas R; Pipe, James G

2015-11-01

To introduce a multiplatform, Python language-based, development environment called graphical programming interface for prototyping MRI techniques. The interface allows developers to interact with their scientific algorithm prototypes visually in an event-driven environment making tasks such as parameterization, algorithm testing, data manipulation, and visualization an integrated part of the work-flow. Algorithm developers extend the built-in functionality through simple code interfaces designed to facilitate rapid implementation. This article shows several examples of algorithms developed in graphical programming interface including the non-Cartesian MR reconstruction algorithms for PROPELLER and spiral as well as spin simulation and trajectory visualization of a FLORET example. The graphical programming interface framework is shown to be a versatile prototyping environment for developing numeric algorithms used in the latest MR techniques. © 2014 Wiley Periodicals, Inc.

Tapir: A web interface for transit/eclipse observability

Science.gov (United States)

Jensen, Eric

2013-06-01

Tapir is a set of tools, written in Perl, that provides a web interface for showing the observability of periodic astronomical events, such as exoplanet transits or eclipsing binaries. The package provides tools for creating finding charts for each target and airmass plots for each event. The code can access target lists that are stored on-line in a Google spreadsheet or in a local text file.

Urban/rural interface: Governing the chaos

Science.gov (United States)

Ferreira, António

2016-04-01

Cities have become recently the home for more than half of the world's population. Cities are often seen as ecological systems just a short step away from collapse [Newman 2006]. Being a human construction, cities disrupt the natural cycles and the patterns of temporal and spatial distribution of environmental and ecological processes. Urbanization produces ruptures in biota, water, energy and nutrients connectivity that can lead to an enhanced exposure to disruptive events that hamper the wellbeing and the resilience of urban communities in a global change context. An important issue in what concerns urban sprawl is the interface between the urban and the rural territories. Being an extremely dynamic landscape, and assuring some quality of life and buffering some of the pervasive negative impacts of urban areas in terms of disrupting the function of the natural ecosystems, in limit situations this interface can act as a conveyor belt of catastrophic events originated in the rural world, into the urban space. The Coimbra 2005 wildfire is a fine example of how a poorly managed urban/rural interface can put populations in danger, by allowing the fire to spread towards the urban green infrastructure, burning houses in the process. Major river flows that flood urban areas are also good examples of the lack of management and planning can result in the loss of assets and even put in danger human lives. This presentation reviews the impact of extreme events and the transmission from the urban to the rural worlds, but also from the rural to the urban territories, and establishes the need to govern risk at various levels and using the full range of governance tools.

Gas Gun Studies of Interface Wear Effects

Science.gov (United States)

Jackson, Tyler; Kennedy, Greg; Thadhani, Naresh

2011-06-01

The characteristics of interface wear were studied by performing gas gun experiments at velocities up to 1 km/s. The approach involved developing coefficients of constitutive strength models for Al 6061 and OFHC-Cu, then using those to design die geometry for interface wear gas gun experiments. Taylor rod-on-anvil impact experiments were performed to obtain coefficients of the Johnson-Cook constitutive strength model by correlating experimentally obtained deformed states of impacted samples with those predicted using ANSYS AUTODYN hydrocode. Simulations were used with validated strength models to design geometry involving acceleration of Al rods through a copper concentric cylindrical angular extrusion die. Experiments were conducted using 7.62 mm and 80 mm diameter gas guns. Differences in the microstructure of the interface layer and microhardness values illustrate that stress-strain conditions produced during acceleration of Al through the hollow concentric copper die, at velocities less than 800 m/s, result in formation of a layer via solid state alloying due to severe plastic deformation, while higher velocities produce an interface layer consisting of melted and re-solidified aluminum.

A new possible biological interface model useful to narrate the artificial negative events by the radioactive contaminations and heavy-metals pollution of the soil and the atmosphere in different areas of Europe

International Nuclear Information System (INIS)

Pasquinelli, P.; Boschi, A.

2002-01-01

A lot of environmental negative effects are associated to the pollution and radioactive contaminations of the soil and the atmosphere. Actually the C.I.S.A.M. (Interforces Centre for Studies and Military Applications) receives increasing commitments to control and to knowledge about the risks of the population and soldiers employed as stabilization or keeping peace force in large areas of different territories of Europe and other sites of the Planet. The aim of this work is focused to compare the contents of radionuclides on specific natural interfaces in different areas as residual radioactive contamination in addition to the other possible heavy-metals pollution. We used barks, lichens and symbiontic microalgae as interfaces with the atmospheric events of the Chernobyl, Balkan, and the Italian areas. The qualitative analysis of these biological matters showed the constant presence of Radiocesium, along with other radionuclides, of which we report the concentrations. Even if these observations are not completely new, nevertheless we can suppose that this approach could be a new possible interface model useful to narrate the sequence of the the artificial negative events due to the human activities and contemporarely an indirect valuation of different risks pointed to the protection of the exposed population

Structural and functional analysis of multi-interface domains.

Directory of Open Access Journals (Sweden)

Liang Zhao

Full Text Available A multi-interface domain is a domain that can shape multiple and distinctive binding sites to contact with many other domains, forming a hub in domain-domain interaction networks. The functions played by the multiple interfaces are usually different, but there is no strict bijection between the functions and interfaces as some subsets of the interfaces play the same function. This work applies graph theory and algorithms to discover fingerprints for the multiple interfaces of a domain and to establish associations between the interfaces and functions, based on a huge set of multi-interface proteins from PDB. We found that about 40% of proteins have the multi-interface property, however the involved multi-interface domains account for only a tiny fraction (1.8% of the total number of domains. The interfaces of these domains are distinguishable in terms of their fingerprints, indicating the functional specificity of the multiple interfaces in a domain. Furthermore, we observed that both cooperative and distinctive structural patterns, which will be useful for protein engineering, exist in the multiple interfaces of a domain.

Representing Graphical User Interfaces with Sound: A Review of Approaches

Science.gov (United States)

Ratanasit, Dan; Moore, Melody M.

2005-01-01

The inability of computer users who are visually impaired to access graphical user interfaces (GUIs) has led researchers to propose approaches for adapting GUIs to auditory interfaces, with the goal of providing access for visually impaired people. This article outlines the issues involved in nonvisual access to graphical user interfaces, reviews…

CAFE, a modern C++ interface to the EPICS channel access library

International Nuclear Information System (INIS)

Chrin, J.; Sloan, M.C.

2012-01-01

CAFE (Channel Access interface) is a C++ library that provides a modern, multifaceted interface to the EPICS-based control system that we may find in particle accelerators for instance. CAFE makes extensive use of templates and containers with multiple STL-compatible access methods to enhance efficiency, flexibility and performance. Stability and robustness are accomplished by ensuring that connectivity to EPICS channels remains in a well defined state in every eventuality, and results of all synchronous and asynchronous operations are captured and reported with integrity. CAFE presents the user with a number of options for writing and retrieving data to and from the control system. In addition to basic read and write operations, a further abstraction layer provides transparency to more intricate functionalities involving logical sets of data; such 'group' objects are easily instantiated through an XML-based configuration mechanism. CAFE's suitability for use in a broad spectrum of applications is demonstrated. These range from high performance Qt GUI (Graphical User Interface) control widgets, to event processing agents that propagate data through the Object Managements Group's Data Distribution Service (OMG-DDS), to script-like frameworks such as MATLAB. The methodology for the modular use of CAFE serves to improve maintainability by enforcing a logical boundary between the channel access components and the programming extensions of the application framework at hand. (authors)

Applying Spatial Audio to Human Interfaces: 25 Years of NASA Experience

Science.gov (United States)

Begault, Durand R.; Wenzel, Elizabeth M.; Godfrey, Martine; Miller, Joel D.; Anderson, Mark R.

2010-01-01

From the perspective of human factors engineering, the inclusion of spatial audio within a human-machine interface is advantageous from several perspectives. Demonstrated benefits include the ability to monitor multiple streams of speech and non-speech warning tones using a cocktail party advantage, and for aurally-guided visual search. Other potential benefits include the spatial coordination and interaction of multimodal events, and evaluation of new communication technologies and alerting systems using virtual simulation. Many of these technologies were developed at NASA Ames Research Center, beginning in 1985. This paper reviews examples and describes the advantages of spatial sound in NASA-related technologies, including space operations, aeronautics, and search and rescue. The work has involved hardware and software development as well as basic and applied research.

Photophysics and electrochemistry relevant to photocatalytic water splitting involved at solid–electrolyte interfaces

KAUST Repository

Shinagawa, Tatsuya; Cao, Zhen; Cavallo, Luigi; Takanabe, Kazuhiro

2016-01-01

Direct photon to chemical energy conversion using semiconductor-electrocatalyst-electrolyte interfaces has been extensively investigated for more than a half century. Many studies have focused on screening materials for efficient photocatalysis

Safeguards summary event list (SSEL)

International Nuclear Information System (INIS)

1989-07-01

The Safeguards Summary Event List (SSEL) provides brief summaries of several hundred safeguards-related events involving nuclear material or facilities regulated by the US Nuclear Regulatory Commission (NRC). Because of public interest, also included are events reported involving byproduct material which is exempt from safeguards requirements. Events are described under the categories of bomb-related, intrusion, missing and/or allegedly stolen, transportation, tampering/vandalism, arson, firearms, radiological sabotage, nonradiological sabotage, alcohol and drugs, and miscellaneous. The information contained in the event descriptions is derived primarily from official NRC reporting channels

Safeguards Summary Event List (SSEL)

International Nuclear Information System (INIS)

Fadden, M.; Yardumian, J.

1993-07-01

The Safeguards Summary Event List provides brief summaries of hundreds of safeguards-related events involving nuclear material or facilities regulated by the US Nuclear Regulatory Commission. Events are described under the categories: Bomb-related, Intrusion, Missing/Allegedly Stolen, Transportation-related, Tampering/Vandalism, Arson, Firearms-related, Radiological Sabotage, Non-radiological Sabotage, and Miscellaneous. Because of the public interest, the Miscellaneous category also includes events reported involving source material, byproduct material, and natural uranium, which are exempt from safeguards requirements. Information in the event descriptions was obtained from official NRC sources

Interface management for the Yucca Mountain Project

International Nuclear Information System (INIS)

1988-12-01

The subject of this report is selection of that portion of physical and informational interfaces that need to be controlled on the Yucca Mountain Project (YMP). Physical interfaces are interactions between physical elements of the mined geologic disposal system; for example, the repository shafts will interface with the shafts in the Exploratory Shaft Facility (ESF), because the ESF shafts will eventually be absorbed into the repository as additional repository shafts. Informational interfaces are interactions involving an exchange of information between organizations working on the mined geologic disposal system; for example, the in situ testing contractor will interact with the site performance assessment contractor and will supply information regarding host rock behavior. This report describes the physical system interfaces that can be identified from analysis of a physical system structure. A discussion of informational interfaces can be found elsewhere. 30 refs., 8 figs., 3 tabs

WIRED World Wide Web Interactive Remote Event Display

CERN Document Server

Ballaminut, A; Dönszelmann, M; Van Herwijnen, Eric; Köper, D; Korhonen, J; Litmaath, M; Perl, J; Theodorou, A; Whiteson, D; Wolff, E

2000-01-01

WIRED is a framework, written in Java, to build High Energy Physics event displays that can be used across the network. To guarantee portability across all platforms, WIRED is implemented in the Java language and uses the Swing user interface component set. It can be used as a stand-alone application or as an applet inside a WWW browser. The graphical user interface allows for multiple views and for multiple controls acting on those views. A detector tree control is available to toggle the visibility of parts of the events and detector geometry. XML (Extensible Markup Language), RMI (Remote Method Invocation) and CORBA loaders can be used to load event data as well as geometry data, and to connect to FORTRAN, C, C++ and Java reconstruction programs. Non-linear and non-Cartesian projections (e.g. fish-eye, rho-phi, rho-Z, phi-Z) provide special views to get a better understanding of events. WIRED has grown to be a framework in use and under development in several HEP experiments (ATLAS, CHORUS, DELPHI, LHCb, B...

Addressing the Federal-State-Local Interface Issues During a Catastrophic Event Such as an Anthrax Attack

Energy Technology Data Exchange (ETDEWEB)

Stein, Steven L.; Lesperance, Ann M.; Upton, Jaki F.

2010-02-01

On October 9, 2008, federal, state and local policy makers, emergency managers, and medical and public health officials convened in Seattle, Washington, for a workshop on Addressing the Federal-State-Local Interface Issues During a Catastrophic Event Such as an Anthrax Attack. The day-long symposium was aimed at generating a dialogue about recovery and restoration through a discussion of the associated challenges that impact entire communities, including people, infrastructure, and critical systems. The Principal Federal Official (PFO) provided an overview of the role of the PFO in a catastrophic event. A high-level summary of an anthrax scenario was presented. The remainder of the day was focused on interactive discussions among federal, state and local emergency management experts in the areas of: • Decision-making, prioritization, and command and control • Public health/medical services • Community resiliency and continuity of government. Key topics and issues that resulted from discussions included: • Local representation in the Joint Field Office (JFO) • JFO transition to the Long-Term Recovery Office • Process for prioritization of needs • Process for regional coordination • Prioritization - process and federal/military intervention • Allocation of limited resources • Re-entry decision and consistency • Importance of maintaining a healthy hospital system • Need for a process to establish a consensus on when it is safe to re-enter. This needs to be across all jurisdictions including the military. • Insurance coverage for both private businesses and individuals • Interaction between the government and industry. The symposium was sponsored by the Interagency Biological Restoration Demonstration, a collaborative regional program jointly funded by the U.S. Department of Homeland Security and the U.S. Department of Defense. To aid the program’s efforts and inform the development of blueprint for recovery from a biological incident

Nitsche's method for interface problems in computational mechanics

Energy Technology Data Exchange (ETDEWEB)

Hansbo, P. [Chalmers Univ. of Technology, Goeteborg (Sweden). Dept. of Applied Mechanics

2005-07-01

We give a review of Nitsche's method applied to interface problems, involving real or artificial interfaces. Applications to unfitted meshes, Chimera meshes, cut meshes, fictitious domain methods, and model coupling are discussed. (orig.)

Analysis of Task Types and Error Types of the Human Actions Involved in the Human-related Unplanned Reactor Trip Events

International Nuclear Information System (INIS)

Kim, Jae Whan; Park, Jin Kyun; Jung, Won Dea

2008-02-01

This report provides the task types and error types involved in the unplanned reactor trip events that have occurred during 1986 - 2006. The events that were caused by the secondary system of the nuclear power plants amount to 67 %, and the remaining 33 % was by the primary system. The contribution of the activities of the plant personnel was identified as the following order: corrective maintenance (25.7 %), planned maintenance (22.8 %), planned operation (19.8 %), periodic preventive maintenance (14.9 %), response to a transient (9.9 %), and design/manufacturing/installation (9.9%). According to the analysis of error modes, the error modes such as control failure (22.2 %), wrong object (18.5 %), omission (14.8 %), wrong action (11.1 %), and inadequate (8.3 %) take up about 75 % of all the unplanned trip events. The analysis of the cognitive functions involved showed that the planning function makes the highest contribution to the human actions leading to unplanned reactor trips, and it is followed by the observation function (23.4%), the execution function (17.8 %), and the interpretation function (10.3 %). The results of this report are to be used as important bases for development of the error reduction measures or development of the error mode prediction system for the test and maintenance tasks in nuclear power plants

Analysis of Task Types and Error Types of the Human Actions Involved in the Human-related Unplanned Reactor Trip Events

Energy Technology Data Exchange (ETDEWEB)

Kim, Jae Whan; Park, Jin Kyun; Jung, Won Dea

2008-02-15

This report provides the task types and error types involved in the unplanned reactor trip events that have occurred during 1986 - 2006. The events that were caused by the secondary system of the nuclear power plants amount to 67 %, and the remaining 33 % was by the primary system. The contribution of the activities of the plant personnel was identified as the following order: corrective maintenance (25.7 %), planned maintenance (22.8 %), planned operation (19.8 %), periodic preventive maintenance (14.9 %), response to a transient (9.9 %), and design/manufacturing/installation (9.9%). According to the analysis of error modes, the error modes such as control failure (22.2 %), wrong object (18.5 %), omission (14.8 %), wrong action (11.1 %), and inadequate (8.3 %) take up about 75 % of all the unplanned trip events. The analysis of the cognitive functions involved showed that the planning function makes the highest contribution to the human actions leading to unplanned reactor trips, and it is followed by the observation function (23.4%), the execution function (17.8 %), and the interpretation function (10.3 %). The results of this report are to be used as important bases for development of the error reduction measures or development of the error mode prediction system for the test and maintenance tasks in nuclear power plants.

Two large-scale analyses of Ty1 LTR-retrotransposon de novo insertion events indicate that Ty1 targets nucleosomal DNA near the H2A/H2B interface

Directory of Open Access Journals (Sweden)

Bridier-Nahmias Antoine

2012-12-01

Full Text Available Abstract Background Over the years, a number of reports have revealed that Ty1 integration occurs in a 1-kb window upstream of Pol III-transcribed genes with an approximate 80-bp periodicity between each integration hotspot and that this targeting requires active Pol III transcription at the site of integration. However, the molecular bases of Ty1 targeting are still not understood. Findings The publications by Baller et al. and Mularoni et al. in the April issue of Genome Res. report the first high-throughput sequencing analysis of Ty1 de novo insertion events. Their observations converge to the same conclusion, that Ty1 targets a specific surface of the nucleosome at he H2A/H2B interface. Conclusion This discovery is important, and should help identifying factor(s involved in Ty1 targeting. Recent data on transposable elements and retroviruses integration site choice obtained by large-scale analyses indicate that transcription and chromatin structure play an important role in this process. The studies reported in this commentary add a new evidence of the importance of chromatin in integration selectivity that should be of interest for everyone interested in transposable elements integration.

Correction: Cecotti, H. and Rivet, B. Subject Combination and Electrode Selection in Cooperative Brain-Computer Interface Based on Event Related Potentials. Brain Sci. 2014, 4, 335–355

Directory of Open Access Journals (Sweden)

Hubert Cecotti

2014-09-01

Full Text Available The authors wish to make the following correction to this paper (Cecotti, H.; Rivet, B. Subject Combination and Electrode Selection in Cooperative Brain-Computer Interface Based on Event Related Potentials. Brain Sci. 2014, 4, 335–355: Due to an internal error, the reference numbers in the original published paper were not shown, and the error was not due to the authors. The former main text should be replaced as below.

The impact of being involved in a medical adverse event on GP's (General Physicians) professional behavior in an ambulatory healthcare fund

NARCIS (Netherlands)

Manor, Orly

2017-01-01

Assurance behavior: performing unnecessary tests so as to deter patients from filing complaints or medical malpractice suits Avoidance behavior: choosing to behave in a way that prevents recurrence of an unpleasant stimulus This thesis examines the impact of involvement in a medical adverse event on

An optimal range of information quantity on computer-based procedure interface design in the advanced main control room

International Nuclear Information System (INIS)

Hsieh Minchih; Chiu Mingchuan; Hwang Sheueling

2015-01-01

The quantification of information in the interface design is a critical issue. Too much information on an interface can confuse a user while executing a task, and too little information may result in poor user performance. This study focused on the quantification of visible information on computer-based procedures (CBPs). Levels of information quantity and task complexity were considered in this experiment. Simulated CBPs were developed to consist of three levels: high (at least 10 events, i.e. 3.32 bits), medium (4–8 events, i.e. 2–3 bits), and low information quantity (1 or 2 events, i.e. 0 or 1 bits). Task complexity comprised two levels: complex tasks and simple tasks. The dependent variables include operation time, secondary task performance, and mental workload. Results suggested that medium information quantity of five to eight events has a remarkable advantage in supporting operator performance under both simple and complex tasks. This research not only suggested the appropriate range of information quantity on the CBP interface, but also complemented certain deficient results of previous CBP interface design studies. Additionally, based on results obtained by this study, the quantification of information on the CBP interface should be considered to ensure safe operation of nuclear power plants. (author)

Workshop on Interface Phenomena

CERN Document Server

Kreuzer, Hans

1987-01-01

This book contains the proceedings of the first Workshop on Interface Phenomena, organized jointly by the surface science groups at Dalhousie University and the University of Maine. It was our intention to concentrate on just three topics related to the kinetics of interface reactions which, in our opinion, were frequently obscured unnecessarily in the literature and whose fundamental nature warranted an extensive discussion to help clarify the issues, very much in the spirit of the Discussions of the Faraday Society. Each session (day) saw two principal speakers expounding the different views; the session chairmen were asked to summarize the ensuing discussions. To understand the complexity of interface reactions, paradigms must be formulated to provide a framework for the interpretation of experimen­ tal data and for the construction of theoretical models. Phenomenological approaches have been based on a small number of rate equations for the concentrations or mole numbers of the various species involved i...

UV photon and low-energy (5--150 eV) electron-stimulated processes at environmental interfaces

International Nuclear Information System (INIS)

Orlando, T.M.

1997-01-01

Irradiation of surfaces and interfaces with low-energy (5--150 eV) electrons and ultraviolet photons occurs during the storage of ''mixed'' (chemical/radioactive) waste forms and during processing steps which involve the use of low temperature plasmas. It is well known that electron- and photon-stimulated desorption (ESD and PSD) from wide band-gap materials and interfaces can be initiated by Auger decay of deep valence and shallow core holes. This process consists of hole production, Auger decay, reversal of the Madelung potential, and ion expulsion due to the Coulomb repulsion. ESD and PSD of neutrals also occurs and involves production of electron-hole pairs and excitons. Generally, neutral yields dominate ESD and PSD cross sections, which typically vary between ∼10 -16 and 10 -22 cm 2 . The authors present results on the ESD and PSD of environmentally relevant substrates such as ZrO 2 (100), soda-glass, and NaNO 3 . The major cation thresholds and yields indicate that ESD and PSD from these complex materials involves Auger stimulated events. In particular, desorption thresholds correlate with ionization of the O(2s), Zr(4p), Si(2p) and Na(2s) levels. The near band-gap threshold energy (∼5--7 eV) for the desorption of neutrals (i.e., atomic oxygen, NO, etc) demonstrate the overall importance of self-trapped and localized excitons in both ESD and PSD of typical ceramics and oxides

Colloid and interface chemistry for nanotechnology

CERN Document Server

Kralchevsky, Peter; Ravera, Francesca

2016-01-01

Colloid and interface science dealt with nanoscale objects for nearly a century before the term nanotechnology was coined. An interdisciplinary field, it bridges the macroscopic world and the small world of atoms and molecules. Colloid and Interface Chemistry for Nanotechnology is a collection of manuscripts reflecting the activities of research teams that have been involved in the networking project Colloid and Interface Chemistry for Nanotechnology (2006-2011), Action D43, the European Science Foundation. The project was a part of the intergovernmental framework for Cooperation in Science and Technology (COST), allowing the coordination of nationally funded research across Europe. With contributions by leading experts, this book covers a wide range of topics. Chapters are grouped into three sections: "Nanoparticle Synthesis and Characterization," "New Experimental Tools and Interpretation," and "Nanocolloidal Dispersions and Interfaces." The topics covered belong to six basic research areas: (1) The synthes...

Nuclear Reactor/Hydrogen Process Interface Including the HyPEP Model

International Nuclear Information System (INIS)

Steven R. Sherman

2007-01-01

The Nuclear Reactor/Hydrogen Plant interface is the intermediate heat transport loop that will connect a very high temperature gas-cooled nuclear reactor (VHTR) to a thermochemical, high-temperature electrolysis, or hybrid hydrogen production plant. A prototype plant called the Next Generation Nuclear Plant (NGNP) is planned for construction and operation at the Idaho National Laboratory in the 2018-2021 timeframe, and will involve a VHTR, a high-temperature interface, and a hydrogen production plant. The interface is responsible for transporting high-temperature thermal energy from the nuclear reactor to the hydrogen production plant while protecting the nuclear plant from operational disturbances at the hydrogen plant. Development of the interface is occurring under the DOE Nuclear Hydrogen Initiative (NHI) and involves the study, design, and development of high-temperature heat exchangers, heat transport systems, materials, safety, and integrated system models. Research and development work on the system interface began in 2004 and is expected to continue at least until the start of construction of an engineering-scale demonstration plant

Atomic modifications by synchrotron radiation at the calcite-ethanol interface

DEFF Research Database (Denmark)

Pasarín, I. S.; Bovet, Nicolas Emile; Glyvradal, Magni

2012-01-01

-mineral interfaces where the polar OH group, as present in ethanol, plays a key role in their molecular structure and bonding. Also, the chemical evolution observed in the interface provides new insight into the behavior of some complex organic molecules involved in biomineralization processes....

Assessing the Usability of Gaze-Adapted Interface against Conventional Eye-based Input Emulation

OpenAIRE

Kumar, Chandan; Menges, Raphael; Staab, Steffen

2017-01-01

In recent years, eye tracking systems have greatly improved, beginning to play a promising role as an input medium. Eye trackers can be used for application control either by simply emulating the mouse and keyboard devices in the traditional graphical user interface, or by customized interfaces for eye gaze events. In this work, we evaluate these two approaches to assess their impact in usability. We present a gaze-adapted Twitter application interface with direct interaction of eye gaze inpu...

Emergency communication and information issues in terrorist events involving radioactive materials.

Science.gov (United States)

Becker, Steven M

2004-01-01

With the threat posed by terrorism involving radioactive materials now high on the nation's agenda, local, state, and federal agencies are moving to enhance preparedness and response capabilities. Crucial to these efforts is the development of effective risk communication strategies. This article reports findings from an ongoing study of risk communication issues in nuclear/radiological terrorism situations. It is part of a larger CDC-funded effort that aims to better understand communication challenges associated with weapons of mass destruction terrorism incidents. Presented here are formative research findings from 16 focus groups (n = 163) in which a multi-part, hypothetical radioactive materials terrorism situation was discussed. Twelve of the focus groups were carried out with members of the general public (drawn from a variety of ethnic backgrounds and geographic locations), and four groups were composed of first responders, hospital emergency department personnel, and public health professionals. One aim of the focus groups was to elicit detailed information on people's knowledge, views, perceptions, reactions, and concerns related to a nuclear/radiological terrorism event, and to better understand people's specific information needs and preferred information sources. A second aim was to pretest draft informational materials prepared by CDC and NIOSH. Key findings for the public and professional groups are presented, and the implications of the research for developing messages in radiological/nuclear terrorism situations are explored.

Neurosignal record with a Brain-Computer interface to estimate the level of stress in a student during a class

Directory of Open Access Journals (Sweden)

Luz Angela Moreno Cueva

2017-07-01

Full Text Available Introduction: This work shows an individual study of the capture, recording, and analysis of the level of stress of a university student during a class that involves an evaluation. The stress information was estimated using a commercial and low-cost computer-brain interface. This allows solving the problem of easily obtaining quantitative and not only qualitative measures. Objective: The aim of this article is to analyze the behavior of neural signals to estimate the level of stress in a student to some verbal and nonverbal events generated by a teacher. Methodology: An experimental design of individual character was developed taking as disturbances the level of stress, events such as questions, time limits, and gestures. Results: Some events that caused stress in students produced by the verbal and non-verbal language of the teacher when teaching the class were evidenced. Conclusions: Teachers are encouraged to moderate their body language during assessments by avoiding actions that emulate anxieties or pressures in unnecessary times.

An Overview of Recent Patents on Musculoskeletal Interface Tissue Engineering

Science.gov (United States)

Rao, Rohit T.; Browe, Daniel P.; Lowe, Christopher J.; Freeman, Joseph W.

2018-01-01

Interface tissue engineering involves the development of engineered grafts that promote integration between multiple tissue types. Musculoskeletal tissue interfaces are critical to the safe and efficient transmission of mechanical forces between multiple musculoskeletal tissues e.g. between ligament and bone tissue. However, these interfaces often do not physiologically regenerate upon injury, resulting in impaired tissue function. Therefore, interface tissue engineering approaches are considered to be particularly relevant for the structural restoration of musculoskeletal tissues interfaces. In this article we provide an overview of the various strategies used for engineering musculoskeletal tissue interfaces with a specific focus on the recent important patents that have been issued for inventions that were specifically designed for engineering musculoskeletal interfaces as well as those that show promise to be adapted for this purpose. PMID:26577344

Mechanisms for collaboration: a design and evaluation framework for multi-user interfaces

OpenAIRE

Yuill, Nicola; Rogers, Yvonne

2012-01-01

Multi-user interfaces are said to provide “natural” interaction in supporting collaboration, compared to individual and noncolocated technologies. We identify three mechanisms accounting for the success of such interfaces: high awareness of others' actions and intentions, high control over the interface, and high availability of background information. We challenge the idea that interaction over such interfaces is necessarily “natural” and argue that everyday interaction involves constraints ...

Effects of organizational safety practices and perceived safety climate on PPE usage, engineering controls, and adverse events involving liquid antineoplastic drugs among nurses.

Science.gov (United States)

DeJoy, David M; Smith, Todd D; Woldu, Henok; Dyal, Mari-Amanda; Steege, Andrea L; Boiano, James M

2017-07-01

Antineoplastic drugs pose risks to the healthcare workers who handle them. This fact notwithstanding, adherence to safe handling guidelines remains inconsistent and often poor. This study examined the effects of pertinent organizational safety practices and perceived safety climate on the use of personal protective equipment, engineering controls, and adverse events (spill/leak or skin contact) involving liquid antineoplastic drugs. Data for this study came from the 2011 National Institute for Occupational Safety and Health (NIOSH) Health and Safety Practices Survey of Healthcare Workers which included a sample of approximately 1,800 nurses who had administered liquid antineoplastic drugs during the past seven days. Regression modeling was used to examine predictors of personal protective equipment use, engineering controls, and adverse events involving antineoplastic drugs. Approximately 14% of nurses reported experiencing an adverse event while administering antineoplastic drugs during the previous week. Usage of recommended engineering controls and personal protective equipment was quite variable. Usage of both was better in non-profit and government settings, when workers were more familiar with safe handling guidelines, and when perceived management commitment to safety was higher. Usage was poorer in the absence of specific safety handling procedures. The odds of adverse events increased with number of antineoplastic drugs treatments and when antineoplastic drugs were administered more days of the week. The odds of such events were significantly lower when the use of engineering controls and personal protective equipment was greater and when more precautionary measures were in place. Greater levels of management commitment to safety and perceived risk were also related to lower odds of adverse events. These results point to the value of implementing a comprehensive health and safety program that utilizes available hazard controls and effectively communicates

Interface management: Effective communication to improve process safety

International Nuclear Information System (INIS)

Kelly, Brian; Berger, Scott

2006-01-01

Failure to successfully communicate maintenance activities, abnormal conditions, emergency response procedures, process hazards, and hundreds of other items of critical information can lead to disaster, regardless of the thoroughness of the process safety management system. Therefore, a well-functioning process safety program depends on maintaining successful communication interfaces between each involved employee or stakeholder and the many other employees or stakeholders that person must interact with. The authors discuss a process to identify the critical 'Interfaces' between the many participants in a process safety management system, and then to establish a protocol for each critical interface

Automated intelligent emergency assesment of GTA pipeline events

Energy Technology Data Exchange (ETDEWEB)

Asgary, Ali; Ghaffari, Alireza; Kong, Albert [University of York, Toronto, (Canada)

2010-07-01

The traditional approach used for risk assessment in pipeline operations is stochastic, using probabilities of events. This paper reports on an investigation into the deployment of an automated intelligence reasoning system used in decision support for risk assessments related to oil and gas emergencies in the Greater Toronto Area (GTA). The study evaluated the use of fuzzy interference rules encoded using JESS and fuzzy J to develop a risk assessment system. Real time data from web services such as weather, Geographic Information Systems (GIS) and Supervisory Control and Data Acquisition (SCADA) systems were used. This study took into consideration the most recent communications infrastructure and technologies, involving the most advanced human machine interface (HMI) access via hypertext transfer protocol (HTTP). This new approach will support decision making in emergency response scenarios. The study showed that the convergence of several technologies may change the automated intelligence system design paradigm.

Hydro-Mechanical Modelling of Slow Slip Phenomena at the Subduction Interface.

Science.gov (United States)

Petrini, C.; Gerya, T.; Madonna, C.; van Dinther, Y.

2016-12-01

Subduction zones experience a spectrum of slip phenomena, ranging from large devastating megathrust earthquakes to aseismic slow slip events. Slow slip events, lasting hours to years and being perceptible only by instruments, are believed to have the capability to induce large earthquakes. It is also repeatedly proposed that such slow events are controlled by fluid-rock interactions along the subduction interface, thus calling for development of fully coupled seismo-hydro-mechanical modeling approaches to identify their physics and controlling parameters. We present a newly developed finite difference visco-elasto-plastic numerical code with marker-in-cell technique, which fully couples mechanical deformation and fluid flow. We use this to investigate how the presence of fluids in the pore space of a (de)compacting rock matrix affects elastic stress accumulation and release along a fluid-bearing subduction interface. The model simulates the spontaneous occurrence of quasi-periodic slow slip phenomena along self-consistently forming highly localized shearbands, which accommodate shear displacement between two plates. The produced elastic rebound events show a slip velocity on the order of cm/yr, which is in good agreement with measured data. The governing gradual strength decrease along the slowly propagating shear bands is related to a drop in total pressure caused by shear localization at nearly constant (slightly decreasing) fluid pressure. Gradual reduction of the difference between the total and fluid pressure decreases brittle/plastic strength of fluid-bearing rocks along the shear bands, thus providing a dynamic feedback mechanism for the accumulated elastic stress release at the subduction interface.

Bookline: a technological tool at service of scientific papers evaluation in academic events

Directory of Open Access Journals (Sweden)

Cênio Back Weyh

2016-12-01

Full Text Available The use of technologies has been more common each day in teaching. The softwares that facilitate the teacher’s work as a technological source can also be used for other aspects of education. The scientific events are fundamental for the particular student’s learnings in higher education. Considering the complexity of coordinating an event due to the number of people involved and the means of sending works for analysis and their evaluation during the event, we looked forward to developing technological tools. In this sense, we developed a software to manage scientific events providing an interface for the organization of the works’ evaluation and of the criteria for evaluation, as well as the management of evaluators and their thematic areas of performance. The software named Bookline was designed for mobile environments, making it possible for the evaluators to wander around freely during the evaluations, getting additional information about each criterion of evaluation, in order to enable the widest spectrum in the constitution of the work’s mark. At the end of the evaluations, the evaluator sends his considerations to the central server, that processes and compiles its data and from the rest of the evaluators identifying if the work was accepted.

Graphical user interface simplifies infusion pump programming and enhances the ability to detect pump-related faults.

Science.gov (United States)

Syroid, Noah; Liu, David; Albert, Robert; Agutter, James; Egan, Talmage D; Pace, Nathan L; Johnson, Ken B; Dowdle, Michael R; Pulsipher, Daniel; Westenskow, Dwayne R

2012-11-01

Drug administration errors are frequent and are often associated with the misuse of IV infusion pumps. One source of these errors may be the infusion pump's user interface. We used failure modes-and-effects analyses to identify programming errors and to guide the design of a new syringe pump user interface. We designed the new user interface to clearly show the pump's operating state simultaneously in more than 1 monitoring location. We evaluated anesthesia residents in laboratory and simulated environments on programming accuracy and error detection between the new user interface and the user interface of a commercially available infusion pump. With the new user interface, we observed the number of programming errors reduced by 81%, the number of keystrokes per task reduced from 9.2 ± 5.0 to 7.5 ± 5.5 (mean ± SD), the time required per task reduced from 18.1 ± 14.1 seconds to 10.9 ± 9.5 seconds and significantly less perceived workload. Residents detected 38 of 70 (54%) of the events with the new user interface and 37 of 70 (53%) with the existing user interface, despite no experience with the new user interface and extensive experience with the existing interface. The number of programming errors and workload were reduced partly because it took less time and fewer keystrokes to program the pump when using the new user interface. Despite minimal training, residents quickly identified preexisting infusion pump problems with the new user interface. Intuitive and easy-to-program infusion pump interfaces may reduce drug administration errors and infusion pump-related adverse events.

Safeguards summary event list (SSEL)

International Nuclear Information System (INIS)

Davidson, J.J.; MacMurdy, P.H.

1980-12-01

The List contains nine categories of events involving NRC licensed material or licensees. It is deliberately broad in scope for two main reasons. First, the list is designed to serve as a reference document. It is as complete and accurate as possible. Second, the list is intended to provide as broad a perspective of the nature of licensee-related events as possible. The nine categories of events are as follows: bomb-related events; intrusion events; missing and/or allegedly stolen events; transportation-related events; vandalism events; arson events; firearms-related events; sabotage events; and miscellaneous events

Basic research needs and opportunities on interfaces in solar materials

Energy Technology Data Exchange (ETDEWEB)

Czanderna, A. W.; Gottschall, R. J. [eds.

1981-04-01

The workshop on research needs and recommended research programs on interfaces in solar energy conversion devices was held June 30-July 3, 1980. The papers deal mainly with solid-solid, solid-liquid, and solid-gas interfaces, sometimes involving multilayer solid-solid interfaces. They deal mainly with instrumental techniques of studying these interfaces so they can be optimized, so they can be fabricated with quality control and so changes with time can be forecast. The latter is required because a long lifetime (20 yrs is suggested) is necessary for economic reasons. Fifteen papers have been entered individually into EDB and ERA. (LTN)

Structural impact detection with vibro-haptic interfaces

Science.gov (United States)

Jung, Hwee-Kwon; Park, Gyuhae; Todd, Michael D.

2016-07-01

This paper presents a new sensing paradigm for structural impact detection using vibro-haptic interfaces. The goal of this study is to allow humans to ‘feel’ structural responses (impact, shape changes, and damage) and eventually determine health conditions of a structure. The target applications for this study are aerospace structures, in particular, airplane wings. Both hardware and software components are developed to realize the vibro-haptic-based impact detection system. First, L-shape piezoelectric sensor arrays are deployed to measure the acoustic emission data generated by impacts on a wing. Unique haptic signals are then generated by processing the measured acoustic emission data. These haptic signals are wirelessly transmitted to human arms, and with vibro-haptic interface, human pilots could identify impact location, intensity and possibility of subsequent damage initiation. With the haptic interface, the experimental results demonstrate that human could correctly identify such events, while reducing false indications on structural conditions by capitalizing on human’s classification capability. Several important aspects of this study, including development of haptic interfaces, design of optimal human training strategies, and extension of the haptic capability into structural impact detection are summarized in this paper.

Enzyme Activity and Biomolecule Templating at Liquid and Solid Interfaces

Energy Technology Data Exchange (ETDEWEB)

Harvey W. Blanch

2004-12-01

There are two main components of this research program. The first involves studies of the adsorption and catalytic activity of proteins at fluid-fluid and fluid-solid interfaces; the second employs biological macromolecules as templates at the solid-liquid interface for controlled crystallization of inorganic materials, to provide materials with specific functionality.

XML-based analysis interface for particle physics data analysis

International Nuclear Information System (INIS)

Hu Jifeng; Lu Xiaorui; Zhang Yangheng

2011-01-01

The letter emphasizes on an XML-based interface and its framework for particle physics data analysis. The interface uses a concise XML syntax to describe, in data analysis, the basic tasks: event-selection, kinematic fitting, particle identification, etc. and a basic processing logic: the next step goes on if and only if this step succeeds. The framework can perform an analysis without compiling by loading the XML-interface file, setting p in run-time and running dynamically. An analysis coding in XML instead of C++, easy-to-understood arid use, effectively reduces the work load, and enables users to carry out their analyses quickly. The framework has been developed on the BESⅢ offline software system (BOSS) with the object-oriented C++ programming. These functions, required by the regular tasks and the basic processing logic, are implemented with both standard modules or inherited from the modules in BOSS. The interface and its framework have been tested to perform physics analysis. (authors)

Online LDA BASED brain-computer interface system to aid disabled people

OpenAIRE

Apdullah Yayık; Yakup Kutlu

2017-01-01

This paper aims to develop brain-computer interface system based on electroencephalography that can aid disabled people in daily life. The system relies on one of the most effective event-related potential wave, P300, which can be elicited by oddball paradigm. Developed application has a basic interaction tool that enables disabled people to convey their needs to other people selecting related objects. These objects pseudo-randomly flash in a visual interface on computer screen. The user must...

Charge regulation at semiconductor-electrolyte interfaces.

Science.gov (United States)

Fleharty, Mark E; van Swol, Frank; Petsev, Dimiter N

2015-07-01

The interface between a semiconductor material and an electrolyte solution has interesting and complex electrostatic properties. Its behavior will depend on the density of mobile charge carriers that are present in both phases as well as on the surface chemistry at the interface through local charge regulation. The latter is driven by chemical equilibria involving the immobile surface groups and the potential determining ions in the electrolyte solution. All these lead to an electrostatic potential distribution that propagate such that the electrolyte and the semiconductor are dependent on each other. Hence, any variation in the charge density in one phase will lead to a response in the other. This has significant implications on the physical properties of single semiconductor-electrolyte interfaces and on the electrostatic interactions between semiconductor particles suspended in electrolyte solutions. The present paper expands on our previous publication (Fleharty et al., 2014) and offers new results on the electrostatics of single semiconductor interfaces as well as on the interaction of charged semiconductor colloids suspended in electrolyte solution. Copyright © 2014 Elsevier Inc. All rights reserved.

Integrated Initiating Event Performance Indicators

International Nuclear Information System (INIS)

S. A. Eide; Dale M. Rasmuson; Corwin L. Atwood

2005-01-01

The U.S. Nuclear Regulatory Commission Industry Trends Program (ITP) collects and analyses industry-wide data, assesses the safety significance of results, and communicates results to Congress and other stakeholders. This paper outlines potential enhancements in the ITP to comprehensively cover the Initiating Events Cornerstone of Safety. Future work will address other cornerstones of safety. The proposed Tier 1 activity involves collecting data on ten categories of risk-significant initiating events, trending the results, and comparing early performance with prediction limits (allowable numbers of events, above which NRC action may occur). Tier 1 results would be used to monitor industry performance at the level of individual categories of initiating events. The proposed Tier 2 activity involves integrating the information for individual categories of initiating events into a single risk-based indicator, termed the Baseline Risk Index for Initiating Events or BRIIE. The BRIIE would be evaluated yearly and compared against a threshold. BRIIE results would be reported to Congress on a yearly basis

Characterization of uranium corrosion products involved in the March 13, 1998 fuel manufacturing facility pyrophoric event

International Nuclear Information System (INIS)

Totemeier, T.C.

1999-01-01

Uranium metal corrosion products from ZPPR fuel plates involved in the March 13, 1998 pyrophoric event in the Fuel Manufacturing Facility at Argonne National Laboratory-West were characterized using thermo-gravimetric analysis, X-ray diffraction, and BET gas sorption techniques. Characterization was performed on corrosion products in several different conditions: immediately after separation from the source metal, after low-temperature passivation, after passivation and extended vault storage, and after burning in the pyrophoric event. The ignition temperatures and hydride fractions of the corrosion product were strongly dependent on corrosion extent. Corrosion products from plates with corrosion extents less than 0.7% did not ignite in TGA testing, while products from plates with corrosion extents greater than 1.2% consistently ignited. Corrosion extent is defined as mass of corrosion products divided by the total mass of uranium. The hydride fraction increased with corrosion extent. There was little change in corrosion product properties after low-temperature passivation or vault storage. The burned products were not reactive and contained no hydride; the principal constituents were UO 2 and U 3 O 7 . The source of the event was a considerable quantity of reactive hydride present in the corrosion products. No specific ignition mechanism could be conclusively identified. The most likely initiator was a static discharge in the corrosion product from the 14th can as it was poured into the consolidation can. The available evidence does not support scenarios in which the powder in the consolidation can slowly self-heated to the ignition point, or in which the powder in the 14th can was improperly passivated

Characterization of uranium corrosion products involved in the March 13, 1998 fuel manufacturing facility pyrophoric event.

Energy Technology Data Exchange (ETDEWEB)

Totemeier, T.C.

1999-04-26

Uranium metal corrosion products from ZPPR fuel plates involved in the March 13, 1998 pyrophoric event in the Fuel Manufacturing Facility at Argonne National Laboratory-West were characterized using thermo-gravimetric analysis, X-ray diffraction, and BET gas sorption techniques. Characterization was performed on corrosion products in several different conditions: immediately after separation from the source metal, after low-temperature passivation, after passivation and extended vault storage, and after burning in the pyrophoric event. The ignition temperatures and hydride fractions of the corrosion product were strongly dependent on corrosion extent. Corrosion products from plates with corrosion extents less than 0.7% did not ignite in TGA testing, while products from plates with corrosion extents greater than 1.2% consistently ignited. Corrosion extent is defined as mass of corrosion products divided by the total mass of uranium. The hydride fraction increased with corrosion extent. There was little change in corrosion product properties after low-temperature passivation or vault storage. The burned products were not reactive and contained no hydride; the principal constituents were UO{sub 2} and U{sub 3}O{sub 7}. The source of the event was a considerable quantity of reactive hydride present in the corrosion products. No specific ignition mechanism could be conclusively identified. The most likely initiator was a static discharge in the corrosion product from the 14th can as it was poured into the consolidation can. The available evidence does not support scenarios in which the powder in the consolidation can slowly self-heated to the ignition point, or in which the powder in the 14th can was improperly passivated.

Multilevel interfaces for power plant control rooms I: An integrative review

International Nuclear Information System (INIS)

Vicente, K.J.

1992-01-01

Events that are unfamiliar to operators and that have not been anticipated by designers pose the greatest threat to system safety in nuclear power plants. The abstraction hierarchy has been proposed as a representation framework that can be adopted to design interfaces that support operators in dealing with these unanticipated events. This multilevel representation format represents a plant in terms of both physical and functional constraints. This article reviews, for the first time, the work that has been done in academia, industry, and research laboratories on multilevel interfaces based on the abstraction hierarchy. The review indicates that there are many degrees of freedom in designing an interface based on the abstraction hierarchy but that very little systematic work has been done in evaluating how best to deal with those degrees of freedom. As a result, there is very little defensible guidance to provide designers. As a first step in overcoming this barrier, a companion paper uses the results of the review presented here to develop a preliminary design space for multilevel interfaces based on the abstraction hierarchy. This space serves several worthwhile purposes relevant not only to research but also to design and regulation as well. Consequently this complementary set of papers should be of interest to researchers, designers, and regulators concerned with nuclear power-plant control rooms. 53 refs., 8 figs

Interface tracking for 2D hydrodynamics

International Nuclear Information System (INIS)

Bezard, Fabienne

1997-01-01

The aim of this work is to explore new methods to numerically simulate the evolution of interfaces between immiscible fluids in the context of the dynamics of compressible and non-viscous fluids. The methods currently available, to our knowledge, to deal with this type of problem are based on the Lagrange coordinates (that is to say, that follow the material in its displacements) or on the Euler coordinates (fixed during the time). In the case of Eulerian coordinates, the simplest methods involve so-called 'mixing' meshes (that is, containing several fluids). The study that is presented is based on an Eulerian method with Lagrangian interface tracking. This avoids the introduction of any model of mesh of mixture. This method combines some advantages of the previously mentioned methods, notably the precision of the Lagrangian follow-up and the robustness of the Eulerian schemes. This report describes only the algorithms of displacement and regularization of the interface, by clearly presenting the geometry around the interface. These algorithms will then be coupled with the resolution of two-dimensional hydrodynamic equations to solve multi-fluid problems. Some numerical results are proposed to illustrate the good behavior of the interface tracking algorithm [fr

EpiGeNet: A Graph Database of Interdependencies Between Genetic and Epigenetic Events in Colorectal Cancer.

Science.gov (United States)

Balaur, Irina; Saqi, Mansoor; Barat, Ana; Lysenko, Artem; Mazein, Alexander; Rawlings, Christopher J; Ruskin, Heather J; Auffray, Charles

2017-10-01

The development of colorectal cancer (CRC)-the third most common cancer type-has been associated with deregulations of cellular mechanisms stimulated by both genetic and epigenetic events. StatEpigen is a manually curated and annotated database, containing information on interdependencies between genetic and epigenetic signals, and specialized currently for CRC research. Although StatEpigen provides a well-developed graphical user interface for information retrieval, advanced queries involving associations between multiple concepts can benefit from more detailed graph representation of the integrated data. This can be achieved by using a graph database (NoSQL) approach. Data were extracted from StatEpigen and imported to our newly developed EpiGeNet, a graph database for storage and querying of conditional relationships between molecular (genetic and epigenetic) events observed at different stages of colorectal oncogenesis. We illustrate the enhanced capability of EpiGeNet for exploration of different queries related to colorectal tumor progression; specifically, we demonstrate the query process for (i) stage-specific molecular events, (ii) most frequently observed genetic and epigenetic interdependencies in colon adenoma, and (iii) paths connecting key genes reported in CRC and associated events. The EpiGeNet framework offers improved capability for management and visualization of data on molecular events specific to CRC initiation and progression.

Interfacing CAMAC instrumentation to the USB port

International Nuclear Information System (INIS)

Ribas, R.V.

2010-01-01

Full text. CAMAC instrumentation like ADCs, TDCs, scalers, etc. are still very useful in data acquisition system for low energy nuclear physics. Since the popularity of this norm decreased strongly in the last 10-15 years, most of the interfaces of the CAMAC crate controller to micro computers are no longer available in modern computers (ISA slots, GPIB boards, etc.). Also, the CAMAC crate is a quite a heavy and noisy unit, that is completely inadequate if only 2-3 CAMAC modules are used in the crate. In order to have portable and simple interface to personal computers, we are developing an interface board that can accommodate up to four CAMAC modules to the USB port. The interface includes a micro controller to handle the trigger signals, CAMAC operations, event formatting and data transfer to the computer. The first version of the interface is limited for two specific modules we have in our laboratory (an Ortec AD811 8x2048 channels ADC and a LeCroy 2228A 8x2048 channels TDC). A small power supply is included in the system, making it quite low weight and portable. Typically it is spent to process each CAMAC read operation and about half this time to dataless operations. More about the performance of this board will be presented. A new interface, capable of handling four CAMAC units is now being planned. The new project will be able to handle virtually any kind of CAMAC module. A CAMAC crate controller based in these boards will also be developed. (author)

Interfacing CAMAC instrumentation to the USB port

Energy Technology Data Exchange (ETDEWEB)

Ribas, R.V. [Universidade de Sao Paulo (IF/USP), SP (Brazil). Inst. de Fisica

2010-07-01

Full text. CAMAC instrumentation like ADCs, TDCs, scalers, etc. are still very useful in data acquisition system for low energy nuclear physics. Since the popularity of this norm decreased strongly in the last 10-15 years, most of the interfaces of the CAMAC crate controller to micro computers are no longer available in modern computers (ISA slots, GPIB boards, etc.). Also, the CAMAC crate is a quite a heavy and noisy unit, that is completely inadequate if only 2-3 CAMAC modules are used in the crate. In order to have portable and simple interface to personal computers, we are developing an interface board that can accommodate up to four CAMAC modules to the USB port. The interface includes a micro controller to handle the trigger signals, CAMAC operations, event formatting and data transfer to the computer. The first version of the interface is limited for two specific modules we have in our laboratory (an Ortec AD811 8x2048 channels ADC and a LeCroy 2228A 8x2048 channels TDC). A small power supply is included in the system, making it quite low weight and portable. Typically it is spent to process each CAMAC read operation and about half this time to dataless operations. More about the performance of this board will be presented. A new interface, capable of handling four CAMAC units is now being planned. The new project will be able to handle virtually any kind of CAMAC module. A CAMAC crate controller based in these boards will also be developed. (author)

Modular routing interface for simoultaneous list mode and histogramming mode storage of coincident data

International Nuclear Information System (INIS)

D'Achard van Eschut, J.F.M.; Nationaal Inst. voor Kernfysica en Hoge-Energiefysica

1985-01-01

A routing interface has been developed and built for successive storage of the digital output of four 13-bit ADCs, within 6 μs, into selected parts of two 16K CAMAC histogramming modules and, if an event trigger is applied, simultaneously into four 64-words deep (16-bit) first-in first-out (FIFO) CAMAC modules. In this way it is possible to accumulate on-line single spectra and, at the same time, write coincident data in list mode to magnetic tape under control of a computer. Additional routing interfaces can be used in parallel so that extensive data-collecting systems can be set up to store multi-parameter events. (orig.)

Safeguards Summary Event List (SSEL)

International Nuclear Information System (INIS)

1983-02-01

The Safeguards Summary Event List (SSEL) provides brief summaries of several hundred safeguards-related events involving nuclear material or facilities regulated by the US Nuclear Regulatory Commission (NRC). Events are described under the categories of bomb-related, intrusion, missing and/or allegedly stolen, transportation, vandalism, arson, firearms, radiological sabotage and miscellaneous. The information contained in the event descriptions is derived primarily from official NRC reporting channels

Safeguards Summary Event List (SSEL)

International Nuclear Information System (INIS)

1982-07-01

The Safeguards Summary Event List (SSEL) provides brief summaries of several hundred safeguards-related events involving nuclear material or facilities regulated by the US Nuclear Regulatory Commission (NRC). Events are described under the categories of bomb-related, intrusion, missing and/or allegedly stolen, transportation, vandalism, arson, firearms, sabotage and miscellaneous. The information contained in the event descriptions is derived primarily from official NRC reporting channels

Toward High-Performance Communications Interfaces for Science Problem Solving

Science.gov (United States)

Oviatt, Sharon L.; Cohen, Adrienne O.

2010-12-01

From a theoretical viewpoint, educational interfaces that facilitate communicative actions involving representations central to a domain can maximize students' effort associated with constructing new schemas. In addition, interfaces that minimize working memory demands due to the interface per se, for example by mimicking existing non-digital work practice, can preserve students' attentional focus on their learning task. In this research, we asked the question: What type of interface input capabilities provide best support for science problem solving in both low- and high- performing students? High school students' ability to solve a diverse range of biology problems was compared over longitudinal sessions while they used: (1) hardcopy paper and pencil (2) a digital paper and pen interface (3) pen tablet interface, and (4) graphical tablet interface. Post-test evaluations revealed that time to solve problems, meta-cognitive control, solution correctness, and memory all were significantly enhanced when using the digital pen and paper interface, compared with tablet interfaces. The tangible pen and paper interface also was the only alternative that significantly facilitated skill acquisition in low-performing students. Paradoxically, all students nonetheless believed that the tablet interfaces provided best support for their performance, revealing a lack of self-awareness about how to use computational tools to best advantage. Implications are discussed for how pen interfaces can be optimized for future educational purposes, and for establishing technology fluency curricula to improve students' awareness of the impact of digital tools on their performance.

Surface and Interface Physics of Correlated Electron Materials

Energy Technology Data Exchange (ETDEWEB)

Millis, Andrew [Columbia Univ., New York, NY (United States)

2004-09-01

The {\\it Surface and Interface Physics of Correlated Electron Materials} research program provided conceptual understanding of and theoretical methodologies for understanding the properties of surfaces and interfaces involving materials exhibiting strong electronic correlations. The issues addressed in this research program are important for basic science, because the behavior of correlated electron superlattices is a crucial challenge to and crucial test of our understanding of the grand-challenge problem of correlated electron physics and are important for our nation's energy future because correlated interfaces offer opportunities for the control of phenomena needed for energy and device applications. Results include new physics insights, development of new methods, and new predictions for materials properties.

Implementation and verification of interface constitutive model in FLAC3D

Directory of Open Access Journals (Sweden)

Hai-min Wu

2011-09-01

Full Text Available Due to the complexity of soil-structure interaction, simple constitutive models typically used for interface elements in general computer programs cannot satisfy the requirements of discontinuous deformation analysis of structures that contain different interfaces. In order to simulate the strain-softening characteristics of interfaces, a nonlinear strain-softening interface constitutive model was incorporated into fast Lagrange analysis of continua in three dimensions (FLAC3D through a user-defined program in the FISH environment. A numerical simulation of a direct shear test for geosynthetic interfaces was conducted to verify that the interface model was implemented correctly. Results of the numerical tests show good agreement with the results obtained from theoretical calculations, indicating that the model incorporated into FLAC3D can simulate the nonlinear strain-softening behavior of interfaces involving geosynthetic materials. The results confirmed the validity and reliability of the improved interface model. The procedure and method of implementing an interface constitutive model into a commercial computer program also provide a reference for implementation of a new interface constitutive model in FLAC3D.

Response of Land-Sea Interface in Xiamen Bay to Extreme Weather Events Observed with the Ecological Dynamic Buoy Array, a Multifunctional Sensors System

Science.gov (United States)

Wu, J.; Hong, H.; Pan, W.; Zhang, C.

2016-12-01

Recent climate observations suggest that global climate change may result in an increase of extreme weather events (such as tropical cyclones, intense precipitation i.e. heavy rains) in frequency and/or intensity in certain world regions. Subtropical coastal regions are often densely populated areas experiencing rapid development and widespread changes to the aquatic environment. The biogeochemical and ecological responses of coastal systems to extreme weather events are of increasing concern. Enhanced river nutrients input following rain storms has been linked to the ecological responses at land-sea interface. These land-sea interactions can be studied using multifunctional sensors systems. In our study, the Ecological Dynamic Buoy Array, a monitoring system with multiple sensors, was deployed in Xiamen Bay for near real time measurements of different parameters. The Ecological Dynamic Buoy Array is a deep water net cage which functions in long-term synchronous observation of dynamic ecological characteristics with the support of an aerograph, water-watch, LOBO (Land/Ocean Biogeochemical Observatory), ADCP, CTD chain system, YSI vertical profiler, flow cytometer, sea surface camera, and "communication box". The study showed that rain storms during multiple typhoons resulted in greater fluctuations of salinity, N concentration, and other water environmental conditions, which might have been connected with algal blooms (so-called red tide) in Xiamen Bay.

Safeguards Summary Event List (SSEL)

International Nuclear Information System (INIS)

1984-03-01

The Safeguards Summary Event List (SSEL) provides brief summaries of several hundred safeguards-related events involving nuclear material or facilities regulated by the U.S. Nuclear Regulatory Commission (NRC). Events are described under the categories of bomb-related, intrusion, missing and/or allegedly stolen, transportation, tampering/vandalism, arson, firearms, radiological sabotage and miscellaneous. The information contained in the event descriptions is derived primarily from official NRC reporting channels

Invasive Intraneural Interfaces: Foreign Body Reaction Issues

Science.gov (United States)

Lotti, Fiorenza; Ranieri, Federico; Vadalà, Gianluca; Zollo, Loredana; Di Pino, Giovanni

2017-01-01

Intraneural interfaces are stimulation/registration devices designed to couple the peripheral nervous system (PNS) with the environment. Over the last years, their use has increased in a wide range of applications, such as the control of a new generation of neural-interfaced prostheses. At present, the success of this technology is limited by an electrical impedance increase, due to an inflammatory response called foreign body reaction (FBR), which leads to the formation of a fibrotic tissue around the interface, eventually causing an inefficient transduction of the electrical signal. Based on recent developments in biomaterials and inflammatory/fibrotic pathologies, we explore and select the biological solutions that might be adopted in the neural interfaces FBR context: modifications of the interface surface, such as organic and synthetic coatings; the use of specific drugs or molecular biology tools to target the microenvironment around the interface; the development of bio-engineered-scaffold to reduce immune response and promote interface-tissue integration. By linking what we believe are the major crucial steps of the FBR process with related solutions, we point out the main issues that future research has to focus on: biocompatibility without losing signal conduction properties, good reproducible in vitro/in vivo models, drugs exhaustion and undesired side effects. The underlined pros and cons of proposed solutions show clearly the importance of a better understanding of all the molecular and cellular pathways involved and the need of a multi-target action based on a bio-engineered combination approach. PMID:28932181

Institutional Co-Creation Interfaces for Innovation Diffusion during Disaster Management

Directory of Open Access Journals (Sweden)

Adrian SOLOMON

2017-03-01

Full Text Available This paper discusses the concept of Resilient and Green Supply Chain Management (RGSCM implementation in South Eastern Europe (SEE from the point of view of understanding the structure of the inter-organizational (institutional interfaces involved in this process as well as how are these interfaces evolving and transforming over time. As social and environmental concerns are growing in importance through normative and coercive directions, all the regional actors (triple/quadruple/quintuple helix that supply chains interact with need to bridge their inter-organizational interfaces to properly ensure co-creation at the entire stakeholder level towards increasing the chances of a homogenous implementation of RGSCM. In this context, this paper adopts a three-stage mixed methodology of interviews, survey, focus groups, modelling and simulation case studies. The results show that the key pillars of inter-organizational interface integration and evolution reside in the proper identification of the key goals (performance indicators of the involved institutions, which will maintain market-optimized competition levels. Then, institutions will steadily adhere to the market trends as explained by the ST and INT and in the process of adopting the RGSCM eco-innovation (DIT, the new entrant institutions will transform their inter-organizational interface to properly bridge with the core market stakeholder group. Finally, the key driver of interface alteration resides in the ability of disruptive (eco innovators to set new standards. This research has core academic implications by extending the INT, DIT and ST under the context of RGSCM, policy implications in terms of proper policy making to support the required co-creation as well as practical implications by helping organizations to manage their inter-organizational interfaces.

High-precision shape representation using a neuromorphic vision sensor with synchronous address-event communication interface

Science.gov (United States)

Belbachir, A. N.; Hofstätter, M.; Litzenberger, M.; Schön, P.

2009-10-01

A synchronous communication interface for neuromorphic temporal contrast vision sensors is described and evaluated in this paper. This interface has been designed for ultra high-speed synchronous arbitration of a temporal contrast image sensors pixels' data. Enabling high-precision timestamping, this system demonstrates its uniqueness for handling peak data rates and preserving the main advantage of the neuromorphic electronic systems, that is high and accurate temporal resolution. Based on a synchronous arbitration concept, the timestamping has a resolution of 100 ns. Both synchronous and (state-of-the-art) asynchronous arbiters have been implemented in a neuromorphic dual-line vision sensor chip in a standard 0.35 µm CMOS process. The performance analysis of both arbiters and the advantages of the synchronous arbitration over asynchronous arbitration in capturing high-speed objects are discussed in detail.

High-precision shape representation using a neuromorphic vision sensor with synchronous address-event communication interface

International Nuclear Information System (INIS)

Belbachir, A N; Hofstätter, M; Litzenberger, M; Schön, P

2009-01-01

A synchronous communication interface for neuromorphic temporal contrast vision sensors is described and evaluated in this paper. This interface has been designed for ultra high-speed synchronous arbitration of a temporal contrast image sensors pixels' data. Enabling high-precision timestamping, this system demonstrates its uniqueness for handling peak data rates and preserving the main advantage of the neuromorphic electronic systems, that is high and accurate temporal resolution. Based on a synchronous arbitration concept, the timestamping has a resolution of 100 ns. Both synchronous and (state-of-the-art) asynchronous arbiters have been implemented in a neuromorphic dual-line vision sensor chip in a standard 0.35 µm CMOS process. The performance analysis of both arbiters and the advantages of the synchronous arbitration over asynchronous arbitration in capturing high-speed objects are discussed in detail

TEMAC, Top Event Sensitivity Analysis

International Nuclear Information System (INIS)

Iman, R.L.; Shortencarier, M.J.

1988-01-01

1 - Description of program or function: TEMAC is designed to permit the user to easily estimate risk and to perform sensitivity and uncertainty analyses with a Boolean expression such as produced by the SETS computer program. SETS produces a mathematical representation of a fault tree used to model system unavailability. In the terminology of the TEMAC program, such a mathematical representation is referred to as a top event. The analysis of risk involves the estimation of the magnitude of risk, the sensitivity of risk estimates to base event probabilities and initiating event frequencies, and the quantification of the uncertainty in the risk estimates. 2 - Method of solution: Sensitivity and uncertainty analyses associated with top events involve mathematical operations on the corresponding Boolean expression for the top event, as well as repeated evaluations of the top event in a Monte Carlo fashion. TEMAC employs a general matrix approach which provides a convenient general form for Boolean expressions, is computationally efficient, and allows large problems to be analyzed. 3 - Restrictions on the complexity of the problem - Maxima of: 4000 cut sets, 500 events, 500 values in a Monte Carlo sample, 16 characters in an event name. These restrictions are implemented through the FORTRAN 77 PARAMATER statement

WIRED — World Wide Web interactive remote event display

Science.gov (United States)

Ballaminut, A.; Colonello, C.; Dönszelmann, M.; van Herwijnen, E.; Köper, D.; Korhonen, J.; Litmaath, M.; Perl, J.; Theodorou, A.; Whiteson, D.; Wolff, E.

2001-10-01

WIRED ( http://wired.cern.ch/) is a framework, written in Java, to build High Energy Physics event displays that can be used across the network. To guarantee portability across all platforms, WIRED is implemented in the Java language and uses the Swing user interface component set. It can be used as a stand-alone application or as an applet inside a WWW browser. The graphical user interface allows for multiple views and for multiple controls acting on those views. A detector tree control is available to toggle the visibility of parts of the events and detector geometry. XML (Extensible Markup Language), RMI (Remote Method Invocation) and CORBA loaders can be used to load event data as well as geometry data, and to connect to FORTRAN, C, C++ and Java reconstruction programs. Non-linear and non-Cartesian projections (e.g., fisheye, ρ- φ, ρ- Z, φ- Z) provide special views to get a better understanding of events. A special Java interpreter allows physicists to write small scripts to interact with their data and its display. WIRED has grown to be a framework in use and under development in several HEP experiments (ATLAS, CHORUS, DELPHI, LHCb, BaBar, D0 and ZEUS). WIRED event displays have also proven to be useful to explain High Energy Physics to the general public. Both CERN, in its traveling exhibition and MicroCosm, and RAL, during its open days, have displays set up.

Kinetic Interface

DEFF Research Database (Denmark)

2009-01-01

A kinetic interface for orientation detection in a video training system is disclosed. The interface includes a balance platform instrumented with inertial motion sensors. The interface engages a participant's sense of balance in training exercises.......A kinetic interface for orientation detection in a video training system is disclosed. The interface includes a balance platform instrumented with inertial motion sensors. The interface engages a participant's sense of balance in training exercises....

Organic and inorganic osmolytes at lipid membrane interfaces

DEFF Research Database (Denmark)

Westh, P.; Peters, Günther H.j.

2008-01-01

This chapter discusses the interactions of organic osmolytes and membranous interfaces, and the effects of these interactions on the properties of the membrane. It also includes a treatment of inorganic ions at the membrane interface since osmolyte effects involve a balance between organic...... and inorganic components. Before turning to the physicochemical discussion of interfacial interactions, the chapter outlines some central parts of the biology and biotechnology of organic osmolytes. It reviews the central relationships in preferential interaction theory, which we use in subsequent paragraphs...

Using variable transformations to perform common event analysis

International Nuclear Information System (INIS)

Worrell, R.B.

1977-01-01

Any analytical method for studying the effect of common events on the behavior of a system is considered as being a form of common event analysis. The particular common events that are involved often represent quite different phenomena, and this has led to the development of different kinds of common event analysis. For example, common mode failure analysis, common cause analysis, critical location analysis, etc., are all different kinds of common event analysis for which the common events involved represent different phenomena. However, the problem that must be solved for each of these different kinds of common event analysis is essentially the same: Determine the effect of common events on the behavior of a system. Thus, a technique that is useful in achieving one kind of common event analysis is often useful in achieving other kinds of common event analysis

Some recent developments of the immersed interface method for flow simulation

Science.gov (United States)

Xu, Sheng

2017-11-01

The immersed interface method is a general methodology for solving PDEs subject to interfaces. In this talk, I will give an overview of some recent developments of the method toward the enhancement of its robustness for flow simulation. In particular, I will present with numerical results how to capture boundary conditions on immersed rigid objects, how to adopt interface triangulation in the method, and how to parallelize the method for flow with moving objects. With these developments, the immersed interface method can achieve accurate and efficient simulation of a flow involving multiple moving complex objects. Thanks to NSF for the support of this work under Grant NSF DMS 1320317.

FROG: The Fast And Realistic OpenGL Event Displayer

CERN Document Server

Quertenmont, Loic

2009-01-01

FROG [1] [2] is a generic framework dedicated to visualisation of events in high energy experiment. It is suitable to any particular physics experiment or detector design. The code is light (< 3 MB) and fast (browsing time 20 events per second for a large High Energy Physics experiment) and can run on various operating systems, as its object-oriented structure (C++) relies on the cross-platform OPENGL [3] and GLUT [4] libraries. Moreover, FROG does not require installation of third party libraries for the visualisation. This documents describes the features and principles of FROG version 1.106, its working scheme and numerous functionalities such as: 3D and 2D visualisation, graphical user interface, mouse interface, configuration files, production of pictures of various format, integration of personal objects, etc. Finally the application of FROG for physic experiment/environement, such as Gastof, CMS, ILD, Delphes will be presented for illustration.

The ISC Seismic Event Bibliography

Science.gov (United States)

Di Giacomo, Domenico; Storchak, Dmitry

2015-04-01

The International Seismological Centre (ISC) is a not-for-profit organization operating in the UK for the last 50 years and producing the ISC Bulletin - the definitive worldwide summary of seismic events, both natural and anthropogenic - starting from the beginning of 20th century. Often researchers need to gather information related to specific seismic events for various reasons. To facilitate such task, in 2012 we set up a new database linking earthquakes and other seismic events in the ISC Bulletin to bibliographic records of scientific articles (mostly peer-reviewed journals) that describe those events. Such association allows users of the ISC Event Bibliography (www.isc.ac.uk/event_bibliography/index.php) to run searches for publications via a map-based web interface and, optionally, selecting scientific publications related to either specific events or events in the area of interest. Some of the greatest earthquakes were described in several hundreds of articles published over a period of few years. The journals included in our database are not limited to seismology but bring together a variety of fields in geosciences (e.g., engineering seismology, geodesy and remote sensing, tectonophysics, monitoring research, tsunami, geology, geochemistry, hydrogeology, atmospheric sciences, etc.) making this service useful in multidisciplinary studies. Usually papers dealing with large data set are not included (e.g., papers describing a seismic catalogue). Currently the ISC Event Bibliography includes over 17,000 individual publications from about 500 titles related to over 14,000 events that occurred in last 100+ years. The bibliographic records in the Event Bibliography start in the 1950s, and it is updated as new publications become available.

Event Investigation

International Nuclear Information System (INIS)

Korosec, D.

2000-01-01

The events in the nuclear industry are investigated from the license point of view and from the regulatory side too. It is well known the importance of the event investigation. One of the main goals of such investigation is to prevent the circumstances leading to the event and the consequences of the event. The protection of the nuclear workers against nuclear hazard, and the protection of general public against dangerous effects of an event could be achieved by systematic approach to the event investigation. Both, the nuclear safety regulatory body and the licensee shall ensure that operational significant events are investigated in a systematic and technically sound manner to gather information pertaining to the probable causes of the event. One of the results should be appropriate feedback regarding the lessons of the experience to the regulatory body, nuclear industry and general public. In the present paper a general description of systematic approach to the event investigation is presented. The systematic approach to the event investigation works best where cooperation is present among the different divisions of the nuclear facility or regulatory body. By involving management and supervisors the safety office can usually improve their efforts in the whole process. The end result shall be a program which serves to prevent events and reduce the time and efforts solving the root cause which initiated each event. Selection of the proper method for the investigation and an adequate review of the findings and conclusions lead to the higher level of the overall nuclear safety. (author)

Accident sequence precursor events with age-related contributors

Energy Technology Data Exchange (ETDEWEB)

Murphy, G.A.; Kohn, W.E.

1995-12-31

The Accident Sequence Precursor (ASP) Program at ORNL analyzed about 14.000 Licensee Event Reports (LERs) filed by US nuclear power plants 1987--1993. There were 193 events identified as precursors to potential severe core accident sequences. These are reported in G/CR-4674. Volumes 7 through 20. Under the NRC Nuclear Plant Aging Research program, the authors evaluated these events to determine the extent to which component aging played a role. Events were selected that involved age-related equipment degradation that initiated an event or contributed to an event sequence. For the 7-year period, ORNL identified 36 events that involved aging degradation as a contributor to an ASP event. Except for 1992, the percentage of age-related events within the total number of ASP events over the 7-year period ({approximately}19%) appears fairly consistent up to 1991. No correlation between plant ape and number of precursor events was found. A summary list of the age-related events is presented in the report.

Using the safety/security interface to the security manager's advantage

International Nuclear Information System (INIS)

Stapleton, B.W.

1993-01-01

Two aspects of the safety/security interface are discussed: (1) the personal safety of nuclear security officers; and (2) how the security manager can effectively deal with the safety/security interface in solving today's requirements yet supporting the overall mission of the facility. The basis of this presentation is the result of interviews, document analyses, and observations. The conclusion is that proper planning and communication between the players involved in the security/safety interface can benefit the two programs and help achieve overall system integration, ultimately contributing to the bottom line. This is especially important in today's cost conscious environment

MuSim, a Graphical User Interface for Multiple Simulation Programs

Energy Technology Data Exchange (ETDEWEB)

Roberts, Thomas [MUONS Inc., Batavia; Cummings, Mary Anne [MUONS Inc., Batavia; Johnson, Rolland [MUONS Inc., Batavia; Neuffer, David [Fermilab

2016-06-01

MuSim is a new user-friendly program designed to interface to many different particle simulation codes, regardless of their data formats or geometry descriptions. It presents the user with a compelling graphical user interface that includes a flexible 3-D view of the simulated world plus powerful editing and drag-and-drop capabilities. All aspects of the design can be parametrized so that parameter scans and optimizations are easy. It is simple to create plots and display events in the 3-D viewer (with a slider to vary the transparency of solids), allowing for an effortless comparison of different simulation codes. Simulation codes: G4beamline, MAD-X, and MCNP; more coming. Many accelerator design tools and beam optics codes were written long ago, with primitive user interfaces by today's standards. MuSim is specifically designed to make it easy to interface to such codes, providing a common user experience for all, and permitting the construction and exploration of models with very little overhead. For today's technology-driven students, graphical interfaces meet their expectations far better than text-based tools, and education in accelerator physics is one of our primary goals.

The Los Alamos accelerator control system data base: A generic instrumentation interface

International Nuclear Information System (INIS)

Dalesio, L.R.

1990-01-01

Controlling experimental-physics applications requires a control system that can be quickly integrated and easily modified. One aspect of the control system is the interface to the instrumentation. An instrumentation set has been chosen to implement the basic functions needed to monitor and control these applications. A data-driven interface to this instrumentation set provides the required quick integration of the control system. This type of interface is limited by its built-in capabilities. Therefore, these capabilities must provide an adequate range of functions to be of any use. The data-driven interface must support the instrumentation range requird, the events on which to read or control the instrumentation and a method for manipulating the data to calculate terms or close control loops. The database for the Los Alamos Accelerator Control System addresses these requirements. (orig.)

Interfaces and interactions in the Swiss waste disposal programme

International Nuclear Information System (INIS)

McCombie, C.

1994-01-01

Switzerland is a small country (41,293 km 2 ) with a small population (∼7 million) and a small nuclear power park (∼3000 MWe) which gives rise to correspondingly limited volumes of radioactive wastes. The following sections present a summary of the technical and organizational structures involved in the procedures for implementing a back-end strategy in Switzerland and the rationale for their choice. The hierarchical organizational units involved in repository projects, their responsibilities and their interactions are described. This linked chain of responsibilities must be thought through as a whole if interface and communication problems in the line structure are to be minimized -- this we call vertical integration. The programme implementers do not work, however, in a technical or social vacuum. Interfaces to other bodies (regulators, politicians, public) are equally vital to programme success. These communications and exchanges must all be coordinated with one another and with the line organization -- this we call horizontal interaction. The multidimensional organizational system to be considered is described in Sections 2 and 3, in which the roles of each of the entities involved and the relevant interfaces are described. Beforehand, however, we present a short overview of the Swiss waste management strategy and the current programme status in order that individual points made in the following discussion can be related to concrete projects, plans, locations and waste management facilities

An event database for rotational seismology

Science.gov (United States)

Salvermoser, Johannes; Hadziioannou, Celine; Hable, Sarah; Chow, Bryant; Krischer, Lion; Wassermann, Joachim; Igel, Heiner

2016-04-01

The ring laser sensor (G-ring) located at Wettzell, Germany, routinely observes earthquake-induced rotational ground motions around a vertical axis since its installation in 2003. Here we present results from a recently installed event database which is the first that will provide ring laser event data in an open access format. Based on the GCMT event catalogue and some search criteria, seismograms from the ring laser and the collocated broadband seismometer are extracted and processed. The ObsPy-based processing scheme generates plots showing waveform fits between rotation rate and transverse acceleration and extracts characteristic wavefield parameters such as peak ground motions, noise levels, Love wave phase velocities and waveform coherence. For each event, these parameters are stored in a text file (json dictionary) which is easily readable and accessible on the website. The database contains >10000 events starting in 2007 (Mw>4.5). It is updated daily and therefore provides recent events at a time lag of max. 24 hours. The user interface allows to filter events for epoch, magnitude, and source area, whereupon the events are displayed on a zoomable world map. We investigate how well the rotational motions are compatible with the expectations from the surface wave magnitude scale. In addition, the website offers some python source code examples for downloading and processing the openly accessible waveforms.

Fast intraslab fluid-flow events linked to pulses of high pore fluid pressure at the subducted plate interface

Science.gov (United States)

Taetz, Stephan; John, Timm; Bröcker, Michael; Spandler, Carl; Stracke, Andreas

2018-01-01

plate interface, which in turn, may trigger slip events reported from many subduction zones.

Marketing research for organizers of sports events

Directory of Open Access Journals (Sweden)

Gašović Milan

2012-01-01

Full Text Available Marketing research, which provide the data and the information for the decision making process, are essential for organizers of sport events, especially to the organizers of the most significant ones. The mentioned marketing research involves: research of the local market, visitors satisfaction research, evaluation of sponsorship effectiveness, research of the sport events economic influence on the local community or host cities, event host attitudes examination-local population and so on. The marketing research process, for the sport event organizers of needs, involves several steps, such as: goal definition, choice of the research method, research instruments determination, interviewer education, information gathering, data processing, data report, conclusions.

Architecture and development of the CDF hardware event builder

International Nuclear Information System (INIS)

Shaw, T.M.; Booth, A.W.; Bowden, M.

1989-01-01

A hardware Event Builder (EVB) has been developed for use at the Collider Detector experiment at Fermi National Accelerator (CDF). the Event builder presently consists of five FASTBUS modules and has the task of reading out the front end scanners, reformatting the data into YBOS bank structure, and transmitting the data to a Level 3 (L3) trigger system which is composed of multiple VME processing nodes. The Event Builder receives its instructions from a VAX based Buffer Manager (BFM) program via a Unibus Processor Interface (UPI). The Buffer Manager instructs the Event Builder to read out one of the four CDF front end buffers. The Event Builder then informs the Buffer Manager when the event has been formatted and then is instructed to push it up to the L3 trigger system. Once in the L3 system, a decision is made as to whether to write the event to tape

Revealing the cluster of slow transients behind a large slow slip event.

Science.gov (United States)

Frank, William B; Rousset, Baptiste; Lasserre, Cécile; Campillo, Michel

2018-05-01

Capable of reaching similar magnitudes to large megathrust earthquakes [ M w (moment magnitude) > 7], slow slip events play a major role in accommodating tectonic motion on plate boundaries through predominantly aseismic rupture. We demonstrate here that large slow slip events are a cluster of short-duration slow transients. Using a dense catalog of low-frequency earthquakes as a guide, we investigate the M w 7.5 slow slip event that occurred in 2006 along the subduction interface 40 km beneath Guerrero, Mexico. We show that while the long-period surface displacement, as recorded by Global Positioning System, suggests a 6-month duration, the motion in the direction of tectonic release only sporadically occurs over 55 days, and its surface signature is attenuated by rapid relocking of the plate interface. Our proposed description of slow slip as a cluster of slow transients forces us to re-evaluate our understanding of the physics and scaling of slow earthquakes.

An asynchronous data-driven event-building scheme based on ATM switching fabrics

International Nuclear Information System (INIS)

Letheren, M.; Christiansen, J.; Mandjavidze, I.; Verhille, H.; De Prycker, M.; Pauwels, B.; Petit, G.; Wright, S.; Lumley, J.

1994-01-01

The very high data rates expected in experiments at the next generation of high luminosity hadron colliders will be handled by pipelined front-end readout electronics and multiple levels (2 or 3) of triggering. A variety of data acquisition architectures have been proposed for use downstream of the first level trigger. Depending on the architecture, the aggregate bandwidths required for event building are expected to be of the order 10--100 Gbit/s. Here, an Asynchronous Transfer Mode (ATM) packet-switching network technology is proposed as the interconnect for building high-performance, scalable data acquisition architectures. This paper introduces the relevant characteristics of ATM and describes components for the construction of an ATM-based event builder: (1) a multi-path, self-routing, scalable ATM switching fabric, (2) an experimental high performance workstation ATM-interface, and (3) a VMEbus ATM-interface. The requirement for traffic shaping in ATM-based event-builders is discussed and an analysis of the performance of several such schemes is presented

Event tree analysis using artificial intelligence techniques

International Nuclear Information System (INIS)

Dixon, B.W.; Hinton, M.F.

1985-01-01

Artificial Intelligence (AI) techniques used in Expert Systems and Object Oriented Programming are discussed as they apply to Event Tree Analysis. A SeQUence IMPortance calculator, SQUIMP, is presented to demonstrate the implementation of these techniques. Benefits of using AI methods include ease of programming, efficiency of execution, and flexibility of application. The importance of an appropriate user interface is stressed. 5 figs

Vorticity generation and evolution in shock-accelerated density-stratified interfaces

International Nuclear Information System (INIS)

Yang, X.; Chern, I.; Zabusky, N.J.; Samtaney, R.; Hawley, J.F.

1992-01-01

The results of direct numerical simulations of inviscid planar shock-accelerated density-stratified interfaces in two dimensions are presented and compared with shock tube experiments of Haas [(private communication, 1988)] and Sturtevant [in Shock Tubes and Waves, edited by H. Gronig (VCH, Berlin, 1987), p. 89] . Heavy-to-light (''slow/fast or s/f) and light-to-heavy (''fast/slow,'' or f/s) gas interfaces are examined and early-time impulsive vorticity deposition and the evolution of coherent vortex structures are emphasized and quantified. The present second-order Godunov scheme yields excellent agreement with shock-polar analyses at early time. A more physical vortex interpretation explains the commonly used (i.e., linear paradigm) designations of ''unstable'' and ''stable'' for the f/s and s/f interfaces, respectively. The later time events are Rayleigh--Taylor like and can be described in terms of the evolution of a vortex layer (large-scale translation and rotation): asymmetric tip vortex ''roll-up'' and ''binding;'' layer ''instability;'' convective mixing; and baroclinic vorticity generation from secondary shock--interface interactions

The power of simplification: Operator interface with the AP1000R during design-basis and beyond design-basis events

International Nuclear Information System (INIS)

Williams, M. G.; Mouser, M. R.; Simon, J. B.

2012-01-01

The AP1000 R plant is an 1100-MWe pressurized water reactor with passive safety features and extensive plant simplifications that enhance construction, operation, maintenance, safety and cost. The passive safety features are designed to function without safety-grade support systems such as component cooling water, service water, compressed air or HVAC. The AP1000 passive safety features achieve and maintain safe shutdown in case of a design-basis accident for 72 hours without need for operator action, meeting the expectations provided in the European Utility Requirements and the Utility Requirement Document for passive plants. Limited operator actions may be required to maintain safe conditions in the spent fuel pool (SFP) via passive means. This safety approach therefore minimizes the reliance on operator action for accident mitigation, and this paper examines the operator interaction with the Human-System Interface (HSI) as the severity of an accident increases from an anticipated transient to a design basis accident and finally, to a beyond-design-basis event. The AP1000 Control Room design provides an extremely effective environment for addressing the first 72 hours of design-basis events and transients, providing ease of information dissemination and minimal reliance upon operator actions. Symptom-based procedures including Emergency Operating Procedures (EOPs), Abnormal Operating Procedures (AOPs) and Alarm Response Procedures (ARPs) are used to mitigate design basis transients and accidents. Use of the Computerized Procedure System (CPS) aids the operators during mitigation of the event. The CPS provides cues and direction to the operators as the event progresses. If the event becomes progressively worse or lasts longer than 72 hours, and depending upon the nature of failures that may have occurred, minimal operator actions may be required outside of the control room in areas that have been designed to be accessible using components that have been designed

The role of local tunneling states in superconductivity at disordered interfaces

International Nuclear Information System (INIS)

Nguyen, B.D.; Simanek, E.

1982-01-01

The origin of the enhancement of the superconducting transition temperature caused by the presence of disordered interfaces is studied. An enhancement mechanism involving the tunneling of the conduction electrons from metal into the local state coupled to the ''two-level state systems'' in the interfaces region, is considered. In this model, the reduction of the tunneling matrix elements by orthogonality blocking can be avoided. (author)

The third level trigger and output event unit of the UA1 data-acquisition system

International Nuclear Information System (INIS)

Cittolin, S.; Demoulin, M.; Fucci, A.; Haynes, W.; Martin, B.; Porte, J.P.; Sphicas, P.

1989-01-01

The upgraded UA1 experiment utilizes twelve 3081/E emulators for its third-level trigger system. The system is interfaced to VME, and is controlled by 68000 microprocessor VME boards on the input and output. The output controller communicates with an IBM 9375 mainframe via the CERN-IBM developed VICI interface. The events selected by the emulators are output on IBM-3480 cassettes. The usder interface to this system is based on a series of Macintosh personal computers connected to the VME bus. These Macs are also used for developing software for the emulators and for monitoring the entire system. The same configuration has also been used for offline event reconstruction. A description of the system, together with details of both the online and offline modes of operation and an evaluation of its performance are presented. (orig.)

The third level trigger and output event unit of the UA1 data-acquisition system

Science.gov (United States)

Cittolin, S.; Demoulin, M.; Fucci, A.; Haynes, W.; Martin, B.; Porte, J. P.; Sphicas, P.

1989-12-01

The upgraded UA1 experiment utilizes twelve 3081/E emulators for its third-level trigger system. The system is interfaced to VME, and is controlled by 68000 microprocessor VME boards on the input and output. The output controller communicates with an IBM 9375 mainframe via the CERN-IBM developed VICI interface. The events selected by the emulators are output on IBM-3480 cassettes. The user interface to this system is based on a series of Macintosh personal computer connected to the VME bus. These Macs are also used for developing software for the emulators and for monitoring the entire system. The same configuration has also been used for offline event reconstruction. A description of the system, together with details of both the online and offline modes of operation and an eveluation of its performance are presented.

Hospital deaths and adverse events in Brazil

Directory of Open Access Journals (Sweden)

Pavão Ana Luiza B

2011-09-01

Full Text Available Abstract Background Adverse events are considered a major international problem related to the performance of health systems. Evaluating the occurrence of adverse events involves, as any other outcome measure, determining the extent to which the observed differences can be attributed to the patient's risk factors or to variations in the treatment process, and this in turn highlights the importance of measuring differences in the severity of the cases. The current study aims to evaluate the association between deaths and adverse events, adjusted according to patient risk factors. Methods The study is based on a random sample of 1103 patient charts from hospitalizations in the year 2003 in 3 teaching hospitals in the state of Rio de Janeiro, Brazil. The methodology involved a retrospective review of patient charts in two stages - screening phase and evaluation phase. Logistic regression was used to evaluate the relationship between hospital deaths and adverse events. Results The overall mortality rate was 8.5%, while the rate related to the occurrence of an adverse event was 2.9% (32/1103 and that related to preventable adverse events was 2.3% (25/1103. Among the 94 deaths analyzed, 34% were related to cases involving adverse events, and 26.6% of deaths occurred in cases whose adverse events were considered preventable. The models tested showed good discriminatory capacity. The unadjusted odds ratio (OR 11.43 and the odds ratio adjusted for patient risk factors (OR 8.23 between death and preventable adverse event were high. Conclusions Despite discussions in the literature regarding the limitations of evaluating preventable adverse events based on peer review, the results presented here emphasize that adverse events are not only prevalent, but are associated with serious harm and even death. These results also highlight the importance of risk adjustment and multivariate models in the study of adverse events.

End user interface and knowledge base editing system of CSPAR: a knowledge-based consultation system for preventive maintenance in nuclear plants

International Nuclear Information System (INIS)

Sinohara, Yasusi; Terano, Takao; Nishiyama, Takuya

1988-01-01

Consultation System for Prevention of Abnormal-event Recurrence (CSPAR) is a knowledge-based system to analyze the same kind of events to a given fault reported on a nuclear power plant and to give users some informations for effective measures preventing them. This report discusses the interfaces of CSPAR for both end-users and knowledge-base editors. The interfaces are highly interactive and multi-window oriented. The features are as follows: (1) The end-user interfaces has Japanese language processing facility, which enables the users to consult CSPAR with various synonims and related terms for knowledge-base handling; (2) The knowledge-base editing system is used by knowledge-base editors for maintaining the knowledge on both plants' equipments and abnormal events sequences. It has facilities for easy maintenance of knowledge-bases, which includes a graphic oriented browser, a knowledge-base retriever, and a knowledge-base checker. (author)

Estimating energy fluxes within the stream-aquifer interface of the Avenelles basin

Science.gov (United States)

Berrhouma, Asma; Rivière, Agnès; Goblet, Patrick; Cucchi, Karina; Rubin, Yoram; Baudin, Aurélien; Ansart, Patrick; Flipo, Nicolas

2017-04-01

The understanding of water temperature evolution and its associated energy fluxes is important to follow the aquatic habitats evolution and to predict future modifications induced by climate change. The spatio-temporal energy balance dynamics within the stream-aquifer interface is complex because of the multitude of physical, morphological and meteorological parameters on which it depends. This critical interface is involving numerous physical and bio-geochemical processes which are taking place at different time and spatial scales. The energy balance estimation at this interface depends mainly on the direction, magnitude and variability of water exchanges and the temporal variation of river and aquifer temperatures as well as the thermal porous media properties. In this work, a combined numerical and experimental approach is used to study the temporal and spatial evolution of the energy budget along 6 km of the stream network of the Avenelles watershed. With an area of 46 km2, the Avenelles watershed is located 70 km east from Paris. The Avenelles river presents different types of connectivity with the underlying aquifers. Five Local Monitoring Stations (LOMOS) have been deployed along the hydraulic corridor to monitor the water and thermal exchanges between the stream and aquifer over years, based on continuous pressure and temperature measurements in the river, the hyporheic zone (HZ) and the underlying aquifer. A 2D finite element thermo-hydrogeological model (METIS) coupled with a parameters screening script is used to determine the hydrogeological and thermal properties of the HZ and of the underlying aquifers by inversion at five LOMOS. Once the local models are calibrated, water and heat fluxes through the stream - aquifer interface are assessed over years (2012-2015) along the stream network. This work offers a new understanding of the stream-aquifer interface functioning, shifting from a pure hydrological characterizing toward a more subtle view that

Event Boundaries in Memory and Cognition.

Science.gov (United States)

Radvansky, Gabriel A; Zacks, Jeffrey M

2017-10-01

Research on event cognition is rapidly developing and is revealing fundamental aspects of human cognition. In this paper, we review recent and current work that is driving this field forward. We first outline the Event Horizon Model, which broadly describes the impact of event boundaries on cognition and memory. Then, we address recent work on event segmentation, the role of event cognition in working memory and long-term memory, including event model updating, and long term retention. Throughout we also consider how event cognition varies across individuals and groups of people and consider the neural mechanisms involved.

Investigating the roles of touchscreen and physical control interface characteristics on driver distraction and multitasking performance.

Science.gov (United States)

2016-01-01

This study aimed to assess the potential of driver distraction, task performance, orientation of : attention, and perceived workload in a multitasking situation involving interaction with touchscreen : interface, compared to physical interface. Autho...

An interface tracking model for droplet electrocoalescence.

Energy Technology Data Exchange (ETDEWEB)

Erickson, Lindsay Crowl

2013-09-01

This report describes an Early Career Laboratory Directed Research and Development (LDRD) project to develop an interface tracking model for droplet electrocoalescence. Many fluid-based technologies rely on electrical fields to control the motion of droplets, e.g. microfluidic devices for high-speed droplet sorting, solution separation for chemical detectors, and purification of biodiesel fuel. Precise control over droplets is crucial to these applications. However, electric fields can induce complex and unpredictable fluid dynamics. Recent experiments (Ristenpart et al. 2009) have demonstrated that oppositely charged droplets bounce rather than coalesce in the presence of strong electric fields. A transient aqueous bridge forms between approaching drops prior to pinch-off. This observation applies to many types of fluids, but neither theory nor experiments have been able to offer a satisfactory explanation. Analytic hydrodynamic approximations for interfaces become invalid near coalescence, and therefore detailed numerical simulations are necessary. This is a computationally challenging problem that involves tracking a moving interface and solving complex multi-physics and multi-scale dynamics, which are beyond the capabilities of most state-of-the-art simulations. An interface-tracking model for electro-coalescence can provide a new perspective to a variety of applications in which interfacial physics are coupled with electrodynamics, including electro-osmosis, fabrication of microelectronics, fuel atomization, oil dehydration, nuclear waste reprocessing and solution separation for chemical detectors. We present a conformal decomposition finite element (CDFEM) interface-tracking method for the electrohydrodynamics of two-phase flow to demonstrate electro-coalescence. CDFEM is a sharp interface method that decomposes elements along fluid-fluid boundaries and uses a level set function to represent the interface.

Program For Parallel Discrete-Event Simulation

Science.gov (United States)

Beckman, Brian C.; Blume, Leo R.; Geiselman, John S.; Presley, Matthew T.; Wedel, John J., Jr.; Bellenot, Steven F.; Diloreto, Michael; Hontalas, Philip J.; Reiher, Peter L.; Weiland, Frederick P.

1991-01-01

User does not have to add any special logic to aid in synchronization. Time Warp Operating System (TWOS) computer program is special-purpose operating system designed to support parallel discrete-event simulation. Complete implementation of Time Warp mechanism. Supports only simulations and other computations designed for virtual time. Time Warp Simulator (TWSIM) subdirectory contains sequential simulation engine interface-compatible with TWOS. TWOS and TWSIM written in, and support simulations in, C programming language.

Fluid and mass transfer at subduction interfaces-The field metamorphic record

Science.gov (United States)

Bebout, Gray E.; Penniston-Dorland, Sarah C.

2016-01-01

The interface between subducting oceanic slabs and the hanging wall is a structurally and lithologically complex region. Chemically disparate lithologies (sedimentary, mafic and ultramafic rocks) and mechanical mixtures thereof show heterogeneous deformation. These lithologies are tectonically juxtaposed at mm to km scales, particularly in more intensely sheared regions (mélange zones, which act as fluid channelways). This juxtaposition, commonly in the presence of a mobile fluid phase, offers up huge potential for mass transfer and related metasomatic alteration. Fluids in this setting appear capable of transporting mass over scales of kms, along flow paths with widely varying geometries and P-T trajectories. Current models of arc magmatism require km-scale migration of fluids from the interface into mantle wedge magma source regions and implicit in these models is the transport of any fluids generated in the subducting slab along and ultimately through the subduction interface. Field and geochemical studies of high- and ultrahigh-pressure metamorphic rocks elucidate the sources and compositions of fluids in subduction interfaces and the interplay between deformation and fluid and mass transfer in this region. Recent geophysical studies of the subduction interface - its thickness, mineralogy, density, and H2O content - indicate that its rheology greatly influences the ways in which the subducting plate is coupled with the hanging wall. Field investigation of the magnitude and styles of fluid-rock interaction in metamorphic rocks representing "seismogenic zone" depths (and greater) yields insight regarding the roles of fluids and elevated fluid pore pressure in the weakening of plate interface rocks and the deformation leading to seismic events. From a geochemical perspective, the plate interface contributes to shaping the "slab signature" observed in studies of the composition of arc volcanic rocks. Understanding the production of fluids with hybridized chemical

Different frontal involvement in ALS and PLS revealed by Stroop event-related potentials and reaction times

Directory of Open Access Journals (Sweden)

Ninfa eAmato

2013-12-01

Full Text Available BACKGROUND: A growing body of evidence suggests a link between cognitive and pathological changes in amyotrophic lateral sclerosis (ALS and in frontotemporal lobar dementia (FTLD. Cognitive deficits have been investigated much less extensively in primary lateral sclerosis (PLS than in ALS. OBJECTIVE: to investigate bioelectrical activity to Stroop test, assessing frontal function, in ALS, PLS and control groups. METHODS: 32 non-demented ALS patients, 10 non-demented PLS patients and 27 healthy subjects were included. Twenty-nine electroencephalography (EEG channels with binaural reference were recorded during covert Stroop task performance, involving mental discrimination of the stimuli and not vocal or motor response. Group effects on event related potentials (ERPs latency were analyzed using statistical multivariate analysis. Topographic analysis was performed using low resolution brain electromagnetic tomography (LORETA. RESULTS: ALS patients committed more errors in the execution of the task but they were not slower, whereas PLS patients did not show reduced accuracy, despite a slowing of reaction times (RTs. The main ERP components were delayed in ALS, but not in PLS, compared with controls. Moreover, RTs speed but not ERP latency correlated with clinical scores. ALS had decreased frontotemporal activity in the P2, P3 and N4 time windows compared to controls. CONCLUSION: These findings suggest a different pattern of psychophysiological involvement in ALS compared with PLS. The former is increasingly recognized to be a multisystems disorder, with a spectrum of executive and behavioural impairments reflecting frontotemporal dysfunction. The latter seems to mainly involve the motor system, with largely spared cognitive functions. Moreover, our results suggest that the covert version of the Stroop task used in the present study, may be useful to assess cognitive state in the very advanced stage of the disease, when other cognitive tasks are not

Chandra Source Catalog: User Interfaces

Science.gov (United States)

Bonaventura, Nina; Evans, I. N.; Harbo, P. N.; Rots, A. H.; Tibbetts, M. S.; Van Stone, D. W.; Zografou, P.; Anderson, C. S.; Chen, J. C.; Davis, J. E.; Doe, S. M.; Evans, J. D.; Fabbiano, G.; Galle, E.; Gibbs, D. G.; Glotfelty, K. J.; Grier, J. D.; Hain, R.; Hall, D. M.; He, X.; Houck, J. C.; Karovska, M.; Lauer, J.; McCollough, M. L.; McDowell, J. C.; Miller, J. B.; Mitschang, A. W.; Morgan, D. L.; Nichols, J. S.; Nowak, M. A.; Plummer, D. A.; Primini, F. A.; Refsdal, B. L.; Siemiginowska, A. L.; Sundheim, B. A.; Winkelman, S. L.

2010-03-01

The CSCview data mining interface is available for browsing the Chandra Source Catalog (CSC) and downloading tables of quality-assured source properties and data products. Once the desired source properties and search criteria are entered into the CSCview query form, the resulting source matches are returned in a table along with the values of the requested source properties for each source. (The catalog can be searched on any source property, not just position.) At this point, the table of search results may be saved to a text file, and the available data products for each source may be downloaded. CSCview save files are output in RDB-like and VOTable format. The available CSC data products include event files, spectra, lightcurves, and images, all of which are processed with the CIAO software. CSC data may also be accessed non-interactively with Unix command-line tools such as cURL and Wget, using ADQL 2.0 query syntax. In fact, CSCview features a separate ADQL query form for those who wish to specify this type of query within the GUI. Several interfaces are available for learning if a source is included in the catalog (in addition to CSCview): 1) the CSC interface to Sky in Google Earth shows the footprint of each Chandra observation on the sky, along with the CSC footprint for comparison (CSC source properties are also accessible when a source within a Chandra field-of-view is clicked); 2) the CSC Limiting Sensitivity online tool indicates if a source at an input celestial location was too faint for detection; 3) an IVOA Simple Cone Search interface locates all CSC sources within a specified radius of an R.A. and Dec.; and 4) the CSC-SDSS cross-match service returns the list of sources common to the CSC and SDSS, either all such sources or a subset based on search criteria.

Perspective of next generation training system from the viewpoints of human interfaces. Human interface kara mita kyoiku kunren system no genjo to kongo no tenbo

Energy Technology Data Exchange (ETDEWEB)

Nishida, S [Mitsubishi Electric Corp., Tokyo (Japan)

1992-12-10

This paper describes an education and training system placing its emphasis on human interfaces. The paper indicates that the currently used education and training systems lack training functions to cultivate knowledge-based judgment abilities that can find adequate solutions to events that have not been experienced previously; such judgments require deep understanding on the objects; and this training requires a system to aid the comprehension based on knowledges in the realm of recognition science for the 'human understanding'. Next, a pedagogical interface is proposed for aiding the comprehension. The paper enumerates functions indispensable for the comprehension including setting the 'loop for representation and examination', aiding the representation to examination loop, aiding roles by others, and realizing interactions through a hypothetical world. Also enumerated as fundamental techniques to structure such interface are information structuring techniques, groupware techniques, and virtual reality techniques. 19 refs., 10 figs.

Interface Simulation Distances

Directory of Open Access Journals (Sweden)

Pavol Černý

2012-10-01

Full Text Available The classical (boolean notion of refinement for behavioral interfaces of system components is the alternating refinement preorder. In this paper, we define a distance for interfaces, called interface simulation distance. It makes the alternating refinement preorder quantitative by, intuitively, tolerating errors (while counting them in the alternating simulation game. We show that the interface simulation distance satisfies the triangle inequality, that the distance between two interfaces does not increase under parallel composition with a third interface, and that the distance between two interfaces can be bounded from above and below by distances between abstractions of the two interfaces. We illustrate the framework, and the properties of the distances under composition of interfaces, with two case studies.

Towards an Interface for Music Mixing based on Smart Tangibles and Multitouch

DEFF Research Database (Denmark)

Gelineck, Steven; Overholt, Daniel; Büchert, Morten

2013-01-01

This paper presents the continuous work towards the development of an interface for music mixing targeted towards expert sound technicians and producers. The mixing interface uses a stage metaphor mapping scheme where audio channels are represented as digital widgets on a 2D surface. These can...... user study involving a hands-on focus group session where 5 different control technologies are contrasted and discussed. Preliminary findings suggest that smart tangibles were preferred, but that an optimal interface would include a combination of touch, smart tangibles and an extra function control...... tangible for extending the functionality of the smart tangibles. Finally, the interface should incorporate both an edit and mix mode - the latter displaying very limited visual feedback in order to force users to focus their attention to listening instead of the interface....

A single-chip event sequencer and related microcontroller instrumentation for atomic physics research.

Science.gov (United States)

Eyler, E E

2011-01-01

A 16-bit digital event sequencer with 50 ns resolution and 50 ns trigger jitter is implemented by using an internal 32-bit timer on a dsPIC30F4013 microcontroller, controlled by an easily modified program written in standard C. It can accommodate hundreds of output events, and adjacent events can be spaced as closely as 1.5 μs. The microcontroller has robust 5 V inputs and outputs, allowing a direct interface to common laboratory equipment and other electronics. A USB computer interface and a pair of analog ramp outputs can be added with just two additional chips. An optional display/keypad unit allows direct interaction with the sequencer without requiring an external computer. Minor additions also allow simple realizations of other complex instruments, including a precision high-voltage ramp generator for driving spectrum analyzers or piezoelectric positioners, and a low-cost proportional integral differential controller and lock-in amplifier for laser frequency stabilization with about 100 kHz bandwidth.

Classification of Single-Trial Auditory Events Using Dry-Wireless EEG During Real and Motion Simulated Flight

Directory of Open Access Journals (Sweden)

Daniel eCallan

2015-02-01

Full Text Available Application of neuro-augmentation technology based on dry-wireless EEG may be considerably beneficial for aviation and space operations because of the inherent dangers involved. In this study we evaluate classification performance of perceptual events using a dry-wireless EEG system during motion platform based flight simulation and actual flight in an open cockpit biplane to determine if the system can be used in the presence of considerable environmental and physiological artifacts. A passive task involving 200 random auditory presentations of a chirp sound was used for evaluation. The advantage of this auditory task is that it does not interfere with the perceptual motor processes involved with piloting the plane. Classification was based on identifying the presentation of a chirp sound versus silent periods. Evaluation of Independent component analysis and Kalman filtering to enhance classification performance by extracting brain activity related to the auditory event from other non-task related brain activity and artifacts was assessed. The results of permutation testing revealed that single trial classification of presence or absence of an auditory event was significantly above chance for all conditions on a novel test set. The best performance could be achieved with both ICA and Kalman filtering relative to no processing: Platform Off (83.4% vs 78.3%, Platform On (73.1% vs 71.6%, Biplane Engine Off (81.1% vs 77.4%, and Biplane Engine On (79.2% vs 66.1%. This experiment demonstrates that dry-wireless EEG can be used in environments with considerable vibration, wind, acoustic noise, and physiological artifacts and achieve good single trial classification performance that is necessary for future successful application of neuro-augmentation technology based on brain-machine interfaces.

Multilivel interfaces for power plant control rooms II: A preliminary design space

International Nuclear Information System (INIS)

Vicente, K.J.

1992-01-01

Events that are unfamiliar to operators and that have not been anticipated by designers pose the greatest threat to system safely in nuclear power plants. The abstraction hierarchy has been proposed as a representation frame-work that can be adopted to design interfaces that support operators in dealing with these unanticipated events. It consists of a multilevel representation format that represents a plant in terms of both physical and functional constraints. In a companion article, the work that has been done on this topic in academia, industry, and research laboratories was reviewed. On the basis of the results of that review, this article proposes a preliminary design space for multilevel interfaces based on the abstraction hierarchy. This space serves several worthwhile purposes: providing a unified framework within which to compare and contrast previous and future work in this area, providing a coherent research agenda by identifying some of the dimensions that can be meaningfully manipulated and evaluated in future experiments, and finally, serving as an input design by outlining the various decisions that need to be made in developing multilevel interfaces and the different options that are currently available for each of those decisions. Consequently this article should be of interest to researchers, designers, and regulators concerned with nuclear power-plant control rooms

Large interface simulation in an averaged two-fluid code

International Nuclear Information System (INIS)

Henriques, A.

2006-01-01

Different ranges of size of interfaces and eddies are involved in multiphase flow phenomena. Classical formalisms focus on a specific range of size. This study presents a Large Interface Simulation (LIS) two-fluid compressible formalism taking into account different sizes of interfaces. As in the single-phase Large Eddy Simulation, a filtering process is used to point out Large Interface (LI) simulation and Small interface (SI) modelization. The LI surface tension force is modelled adapting the well-known CSF method. The modelling of SI transfer terms is done calling for classical closure laws of the averaged approach. To simulate accurately LI transfer terms, we develop a LI recognition algorithm based on a dimensionless criterion. The LIS model is applied in a classical averaged two-fluid code. The LI transfer terms modelling and the LI recognition are validated on analytical and experimental tests. A square base basin excited by a horizontal periodic movement is studied with the LIS model. The capability of the model is also shown on the case of the break-up of a bubble in a turbulent liquid flow. The break-up of a large bubble at a grid impact performed regime transition between two different scales of interface from LI to SI and from PI to LI. (author) [fr

Safeguards Summary Event List (SSEL), pre-NRC through December 31, 1989

International Nuclear Information System (INIS)

1990-07-01

The Safeguards Summary Event List (SSEL) provides brief summaries of several hundred safeguards-related events involving nuclear material or facilities regulated by the US Nuclear Regulatory Commission (NRC). Because of public interest, the Miscellaneous category includes a few events which involve either source material, byproduct material, or natural uranium which are exempt from safeguards requirements. Events are described under the categories of bomb-related, intrusion, missing and/or allegedly stolen, transportation, tampering/vandalism, arson, firearms, radiological sabotage, nonradiological sabotage, alcohol and drugs (involving reactor operators, security force members, or management persons), and miscellaneous. The information contained in the event descriptions is derived primarily from official NRC reporting channels

Charge separation at nanoscale interfaces: energy-level alignment including two-quasiparticle interactions.

Science.gov (United States)

Li, Huashan; Lin, Zhibin; Lusk, Mark T; Wu, Zhigang

2014-10-21

The universal and fundamental criteria for charge separation at interfaces involving nanoscale materials are investigated. In addition to the single-quasiparticle excitation, all the two-quasiparticle effects including exciton binding, Coulomb stabilization, and exciton transfer are considered, which play critical roles on nanoscale interfaces for optoelectronic applications. We propose a scheme allowing adding these two-quasiparticle interactions on top of the single-quasiparticle energy level alignment for determining and illuminating charge separation at nanoscale interfaces. Employing the many-body perturbation theory based on Green's functions, we quantitatively demonstrate that neglecting or simplifying these crucial two-quasiparticle interactions using less accurate methods is likely to predict qualitatively incorrect charge separation behaviors at nanoscale interfaces where quantum confinement dominates.

Experience feedback of operation events in Ling'ao phase Ⅱ nuclear power plant

International Nuclear Information System (INIS)

Xiao Zhi; Tao Shusheng; Sun Guochen; Zhang Zengqing

2012-01-01

As a new operating nuclear power plant, Ling'ao Phase Ⅱ occurred 20 pieces of operational events in one year of first cycle. By analyzing the events in this paper, the causes of the events are mainly concentrated in three aspects: interface between commissioning and operating, DCS system and the management of human factors. Finally, author gives some suggestions on experience feedback, as a reference to other similar nuclear power plants. (authors)

Event detection intelligent camera development

International Nuclear Information System (INIS)

Szappanos, A.; Kocsis, G.; Molnar, A.; Sarkozi, J.; Zoletnik, S.

2008-01-01

A new camera system 'event detection intelligent camera' (EDICAM) is being developed for the video diagnostics of W-7X stellarator, which consists of 10 distinct and standalone measurement channels each holding a camera. Different operation modes will be implemented for continuous and for triggered readout as well. Hardware level trigger signals will be generated from real time image processing algorithms optimized for digital signal processor (DSP) and field programmable gate array (FPGA) architectures. At full resolution a camera sends 12 bit sampled 1280 x 1024 pixels with 444 fps which means 1.43 Terabyte over half an hour. To analyse such a huge amount of data is time consuming and has a high computational complexity. We plan to overcome this problem by EDICAM's preprocessing concepts. EDICAM camera system integrates all the advantages of CMOS sensor chip technology and fast network connections. EDICAM is built up from three different modules with two interfaces. A sensor module (SM) with reduced hardware and functional elements to reach a small and compact size and robust action in harmful environment as well. An image processing and control unit (IPCU) module handles the entire user predefined events and runs image processing algorithms to generate trigger signals. Finally a 10 Gigabit Ethernet compatible image readout card functions as the network interface for the PC. In this contribution all the concepts of EDICAM and the functions of the distinct modules are described

Glacier seismology: eavesdropping on the ice-bed interface

Science.gov (United States)

Walter, F.; Röösli, C.

2015-12-01

Glacier sliding plays a central role in ice dynamics. A number of remote sensing and deep drilling initiatives have therefore focused on the ice-bed interface. Although these techniques have provided valuable insights into bed properties, they do not supply theorists with data of sufficient temporal and spatial resolution to rigorously test mathematical sliding laws. As an alternative, passive seismic techniques have gained popularity in glacier monitoring. Analysis of glacier-related seismic sources ('icequakes') has become a useful technique to study inaccessible regions of the cryosphere, including the ice-bed interface. Seismic monitoring networks on the polar ice sheets have shown that ice sliding is not only a smooth process involving viscous deformation and regelation of basal ice layers. Instead, ice streams exhibit sudden slip episodes over their beds and intermittent phases of partial or complete stagnation. Here we discuss new and recently published discoveries of basal seismic sources beneath various glacial bodies. We revisit basal seismicity of hard-bedded Alpine glaciers, which is not the result of pure stick-slip motion. Sudden changes in seismicity suggest that the local configuration of the subglacial drainage system undergoes changes on sub daily time scales. Accordingly, such observations place constraints on basal resistance and sliding of hard-bedded glaciers. In contrast, certain clusters of stick-slip dislocations associated with micro seismicity beneath the Greenland ice sheet undergo diurnal variations in magnitudes and inter event times. This is best explained with a soft till bed, which hosts the shear dislocations and whose strength varies in response to changes in subglacial water pressure. These results suggest that analysis of basal icequakes is well suited for characterizing glacier and ice sheet beds. Future studies should address the relative importance between "smooth" and seismogenic sliding in different glacial environments.

Radiation tolerance of the WorldFIP fieldbus interface

CERN Document Server

Wijnands, Thijs

2006-01-01

This paper summarises on radiation tests on the main components for the WorldFIP fieldbus interface. The chipset based on 0.6 \\mu­m technology has a total dose tolerance of 100 Gy (Co-60) and in standalone mode, no functional interrupts from single events have been observed during proton irradiation (60 MeV). The chipset based on 0.5 \\mu­m technology has a total dose tolerance of 150 Gy (Co-60) but shows a sharp increase in the single event cross section after a dose of 70 Gy. Finally, it was found that the chipset based on 0.5 \\mu­m technology operates reliable in standalone mode in a magnetic field up to 4.6 kGauss.

Simulating events

Energy Technology Data Exchange (ETDEWEB)

Ferretti, C; Bruzzone, L [Techint Italimpianti, Milan (Italy)

2000-06-01

The Petacalco Marine terminal on the Pacific coast in the harbour of Lazaro Carclenas (Michoacan) in Mexico, provides coal to the thermoelectric power plant at Pdte Plutarco Elias Calles in the port area. The plant is being converted from oil to burn coal to generate 2100 MW of power. The article describes the layout of the terminal and equipment employed in the unloading, coal stacking, coal handling areas and the receiving area at the power plant. The contractor Techint Italimpianti has developed a software system, MHATIS, for marine terminal management which is nearly complete. The discrete event simulator with its graphic interface provides a real-type decision support system for simulating changes to the terminal operations and evaluating impacts. The article describes how MHATIS is used. 7 figs.

Discrete Event Simulation for the Analysis of Artillery Fired Projectiles from Shore

Science.gov (United States)

2017-06-01

model. 2.1 Discrete Event Simulation with Simkit Simkit is a library of classes and interfaces, written in Java , that support ease of implemen- tation...Simkit allows simulation modelers to break complex systems into components through a framework of Listener Event Graph Objects (LEGOs), described in...Classes A disadvantage to using Java Enum Types is the inability to change the values of Enum Type parameters while conducting a designed experiment

Graphical user interface for image acquisition and processing

Science.gov (United States)

Goldberg, Kenneth A.

2002-01-01

An event-driven GUI-based image acquisition interface for the IDL programming environment designed for CCD camera control and image acquisition directly into the IDL environment where image manipulation and data analysis can be performed, and a toolbox of real-time analysis applications. Running the image acquisition hardware directly from IDL removes the necessity of first saving images in one program and then importing the data into IDL for analysis in a second step. Bringing the data directly into IDL creates an opportunity for the implementation of IDL image processing and display functions in real-time. program allows control over the available charge coupled device (CCD) detector parameters, data acquisition, file saving and loading, and image manipulation and processing, all from within IDL. The program is built using IDL's widget libraries to control the on-screen display and user interface.

Graphical User Interface in Art

Science.gov (United States)

Gwilt, Ian

This essay discusses the use of the Graphical User Interface (GUI) as a site of creative practice. By creatively repositioning the GUI as a work of art it is possible to challenge our understanding and expectations of the conventional computer interface wherein the icons and navigational architecture of the GUI no longer function as a technological tool. These artistic recontextualizations are often used to question our engagement with technology and to highlight the pivotal place that the domestic computer has taken in our everyday social, cultural and (increasingly), creative domains. Through these works the media specificity of the screen-based GUI can broken by dramatic changes in scale, form and configuration. This can be seen through the work of new media artists who have re-imagined the GUI in a number of creative forms both, within the digital, as image, animation, net and interactive art, and in the analogue, as print, painting, sculpture, installation and performative event. Furthermore as a creative work, the GUI can also be utilized as a visual way-finder to explore the relationship between the dynamic potentials of the digital and the concretized qualities of the material artifact.

The power of simplification: Operator interface with the AP1000{sup R} during design-basis and beyond design-basis events

Energy Technology Data Exchange (ETDEWEB)

Williams, M. G.; Mouser, M. R.; Simon, J. B. [Westinghouse Electric Company, 1000 Westinghouse Drive, Cranberry Township, PA 16066 (United States)

2012-07-01

The AP1000{sup R} plant is an 1100-MWe pressurized water reactor with passive safety features and extensive plant simplifications that enhance construction, operation, maintenance, safety and cost. The passive safety features are designed to function without safety-grade support systems such as component cooling water, service water, compressed air or HVAC. The AP1000 passive safety features achieve and maintain safe shutdown in case of a design-basis accident for 72 hours without need for operator action, meeting the expectations provided in the European Utility Requirements and the Utility Requirement Document for passive plants. Limited operator actions may be required to maintain safe conditions in the spent fuel pool (SFP) via passive means. This safety approach therefore minimizes the reliance on operator action for accident mitigation, and this paper examines the operator interaction with the Human-System Interface (HSI) as the severity of an accident increases from an anticipated transient to a design basis accident and finally, to a beyond-design-basis event. The AP1000 Control Room design provides an extremely effective environment for addressing the first 72 hours of design-basis events and transients, providing ease of information dissemination and minimal reliance upon operator actions. Symptom-based procedures including Emergency Operating Procedures (EOPs), Abnormal Operating Procedures (AOPs) and Alarm Response Procedures (ARPs) are used to mitigate design basis transients and accidents. Use of the Computerized Procedure System (CPS) aids the operators during mitigation of the event. The CPS provides cues and direction to the operators as the event progresses. If the event becomes progressively worse or lasts longer than 72 hours, and depending upon the nature of failures that may have occurred, minimal operator actions may be required outside of the control room in areas that have been designed to be accessible using components that have been

Microprocessor event analysis in parallel with Camac data acquisition

International Nuclear Information System (INIS)

Cords, D.; Eichler, R.; Riege, H.

1981-01-01

The Plessey MIPROC-16 microprocessor (16 bits, 250 ns execution time) has been connected to a Camac System (GEC-ELLIOTT System Crate) and shares the Camac access with a Nord-1OS computer. Interfaces have been designed and tested for execution of Camac cycles, communication with the Nord-1OS computer and DMA-transfer from Camac to the MIPROC-16 memory. The system is used in the JADE data-acquisition-system at PETRA where it receives the data from the detector in parallel with the Nord-1OS computer via DMA through the indirect-data-channel mode. The microprocessor performs an on-line analysis of events and the result of various checks is appended to the event. In case of spurious triggers or clear beam gas events, the Nord-1OS buffer will be reset and the event omitted from further processing. (orig.)

Organization of public authorities in France for the event of an incident or accident involving nuclear safety: Simulation of a nuclear crisis

International Nuclear Information System (INIS)

Cartigny, J.; Majorel, Y.

1986-01-01

The French nuclear safety regulations lay down the action to be taken in the event of an incident or accident involving the types of radiological hazard that could arise in a nuclear installation or during the transport of radioactive material. The organization established for this purpose is designed to ensure that the technical measures taken by the authorities responsible for nuclear safety, radiation protection, public order and public safety are fully effective. The Interministerial Nuclear Safety Committee (Comite interministeriel de la securite nucleaire), which reports to the Prime Minister, co-ordinates the measures taken by the public authorities. The public authorities and the operators together organize exercises designed to verify the whole complex of measures foreseen in the event of an incident or accident. These exercises, which have been carried out in a systematic manner in France for some years, are based on scenarios which are as realistic as possible and enable the following objectives to be achieved: (1) analysis of the crisis apparatus (ORSECRAD plans, individual intervention plans, information conventions); (2) uncovering gaps or inadequacies; (3) arrangements for interchange of information between the various participants whose responsibilities involve them in the emergency; and (4) allowance for the information requirements of the media and the population. The information drawn from these exercises enables the various procedures to be improved step by step. (author)

Ecological Interface Design for Computer Network Defense.

Science.gov (United States)

Bennett, Kevin B; Bryant, Adam; Sushereba, Christen

2018-05-01

A prototype ecological interface for computer network defense (CND) was developed. Concerns about CND run high. Although there is a vast literature on CND, there is some indication that this research is not being translated into operational contexts. Part of the reason may be that CND has historically been treated as a strictly technical problem, rather than as a socio-technical problem. The cognitive systems engineering (CSE)/ecological interface design (EID) framework was used in the analysis and design of the prototype interface. A brief overview of CSE/EID is provided. EID principles of design (i.e., direct perception, direct manipulation and visual momentum) are described and illustrated through concrete examples from the ecological interface. Key features of the ecological interface include (a) a wide variety of alternative visual displays, (b) controls that allow easy, dynamic reconfiguration of these displays, (c) visual highlighting of functionally related information across displays, (d) control mechanisms to selectively filter massive data sets, and (e) the capability for easy expansion. Cyber attacks from a well-known data set are illustrated through screen shots. CND support needs to be developed with a triadic focus (i.e., humans interacting with technology to accomplish work) if it is to be effective. Iterative design and formal evaluation is also required. The discipline of human factors has a long tradition of success on both counts; it is time that HF became fully involved in CND. Direct application in supporting cyber analysts.

Adding a scripting interface to Gaudi

International Nuclear Information System (INIS)

Day, C.T.; Quarrie, D.; Tull, C.

2001-01-01

Athena, the Software Framework for ATLAS' offline software, is based on the Gaudi Framework from LHCb. The Processing Model of Gaudi is essentially that of a batch-oriented system - a User prepares a file detailing the configuration of which Algorithms are to be applied to the input data of a job and the parameter values that control the behavior of each Algorithm instance. The Framework then reads that file once at the beginning of a job and runs to completion with no further interaction with the User. The authors have enhanced the Processing Model to include an interactive mode where a User can control the event loop of a running job and modify the algorithms and parameters on the fly. The authors changed only a very small number of Gaudi Classes to provide access to parameters from an embedded Python interpreter. No change was made to the Gaudi Programming Model, i.e, developers need not change anything to make use of this added interface. The authors present details of the design and implementation of the interactive Python interface for Athena

Single event monitoring system based on Java 3D and XML data binding

International Nuclear Information System (INIS)

Wang Liang; Chinese Academy of Sciences, Beijing; Zhu Kejun; Zhao Jingwei

2007-01-01

Online single event monitoring is important to BESIII DAQ System. Java3D is extension of Java Language in 3D technology, XML data binding is more efficient to handle XML document than SAX and DOM. This paper mainly introduce the implementation of BESIII single event monitoring system with Java3D and XML data binding, and interface for track fitting software with JNI technology. (authors)

Optimizing event-related potential based brain-computer interfaces: a systematic evaluation of dynamic stopping methods

Science.gov (United States)

Schreuder, Martijn; Höhne, Johannes; Blankertz, Benjamin; Haufe, Stefan; Dickhaus, Thorsten; Tangermann, Michael

2013-06-01

Objective. In brain-computer interface (BCI) research, systems based on event-related potentials (ERP) are considered particularly successful and robust. This stems in part from the repeated stimulation which counteracts the low signal-to-noise ratio in electroencephalograms. Repeated stimulation leads to an optimization problem, as more repetitions also cost more time. The optimal number of repetitions thus represents a data-dependent trade-off between the stimulation time and the obtained accuracy. Several methods for dealing with this have been proposed as ‘early stopping’, ‘dynamic stopping’ or ‘adaptive stimulation’. Despite their high potential for BCI systems at the patient's bedside, those methods are typically ignored in current BCI literature. The goal of the current study is to assess the benefit of these methods. Approach. This study assesses for the first time the existing methods on a common benchmark of both artificially generated data and real BCI data of 83 BCI sessions, allowing for a direct comparison between these methods in the context of text entry. Main results. The results clearly show the beneficial effect on the online performance of a BCI system, if the trade-off between the number of stimulus repetitions and accuracy is optimized. All assessed methods work very well for data of good subjects, and worse for data of low-performing subjects. Most methods, however, are robust in the sense that they do not reduce the performance below the baseline of a simple no stopping strategy. Significance. Since all methods can be realized as a module between the BCI and an application, minimal changes are needed to include these methods into existing BCI software architectures. Furthermore, the hyperparameters of most methods depend to a large extend on only a single variable—the discriminability of the training data. For the convenience of BCI practitioners, the present study proposes linear regression coefficients for directly estimating

In Vitro Mimetic Models for the Bone-Cartilage Interface Regeneration.

Science.gov (United States)

Bicho, Diana; Pina, Sandra; Oliveira, J Miguel; Reis, Rui L

2018-01-01

In embryonic development, pure cartilage structures are in the basis of bone-cartilage interfaces. Despite this fact, the mature bone and cartilage structures can vary greatly in composition and function. Nevertheless, they collaborate in the osteochondral region to create a smooth transition zone that supports the movements and forces resulting from the daily activities. In this sense, all the hierarchical organization is involved in the maintenance and reestablishment of the equilibrium in case of damage. Therefore, this interface has attracted a great deal of interest in order to understand the mechanisms of regeneration or disease progression in osteoarthritis. With that purpose, in vitro tissue models (either static or dynamic) have been studied. Static in vitro tissue models include monocultures, co-cultures, 3D cultures, and ex vivo cultures, mostly cultivated in flat surfaces, while dynamic models involve the use of bioreactors and microfluidic systems. The latter have emerged as alternatives to study the cellular interactions in a more authentic manner over some disadvantages of the static models. The current alternatives of in vitro mimetic models for bone-cartilage interface regeneration are overviewed and discussed herein.

The interface theory of perception: the future of the science of the mind?

Science.gov (United States)

Hickok, Gregory

2015-12-01

Perception is typically conceptualized as a neurocognitive system that evolved to reveal the truth about objects and events in the world. Hoffman et al.'s Interface Theory of Perception questions this assumption. If true, the implications for the science of the mind are profound.

Transport and diffusion of material quantities on propagating interfaces via level set methods

CERN Document Server

Adalsteinsson, D

2003-01-01

We develop theory and numerical algorithms to apply level set methods to problems involving the transport and diffusion of material quantities in a level set framework. Level set methods are computational techniques for tracking moving interfaces; they work by embedding the propagating interface as the zero level set of a higher dimensional function, and then approximate the solution of the resulting initial value partial differential equation using upwind finite difference schemes. The traditional level set method works in the trace space of the evolving interface, and hence disregards any parameterization in the interface description. Consequently, material quantities on the interface which themselves are transported under the interface motion are not easily handled in this framework. We develop model equations and algorithmic techniques to extend the level set method to include these problems. We demonstrate the accuracy of our approach through a series of test examples and convergence studies.

Transport and diffusion of material quantities on propagating interfaces via level set methods

International Nuclear Information System (INIS)

Adalsteinsson, David; Sethian, J.A.

2003-01-01

We develop theory and numerical algorithms to apply level set methods to problems involving the transport and diffusion of material quantities in a level set framework. Level set methods are computational techniques for tracking moving interfaces; they work by embedding the propagating interface as the zero level set of a higher dimensional function, and then approximate the solution of the resulting initial value partial differential equation using upwind finite difference schemes. The traditional level set method works in the trace space of the evolving interface, and hence disregards any parameterization in the interface description. Consequently, material quantities on the interface which themselves are transported under the interface motion are not easily handled in this framework. We develop model equations and algorithmic techniques to extend the level set method to include these problems. We demonstrate the accuracy of our approach through a series of test examples and convergence studies

Involvement and necessity of the Cpx regulon in the event of aberrant β-barrel outer membrane protein assembly

Science.gov (United States)

Gerken, Henri; Leiser, Owen P.; Bennion, Drew; Misra, Rajeev

2010-01-01

Summary The Cpx and σE regulons help maintain outer membrane integrity; the Cpx pathway monitors the biogenesis of cell surface structures, such as pili, while the σE pathway monitors the biogenesis of β-barrel outer membrane proteins (OMPs). In this study we revealed the importance of the Cpx regulon in the event of β-barrel OMP mis-assembly, by utilizing mutants expressing either a defective β-barrel OMP assembly machinery (Bam) or assembly defective β-barrel OMPs. Analysis of specific mRNAs showed that ΔcpxR bam double mutants failed to induce degP expression beyond the wild type level, despite activation of the σE pathway. The synthetic conditional lethal phenotype of ΔcpxR in mutant Bam or β-barrel OMP backgrounds was reversed by wild type DegP expressed from a heterologous plasmid promoter. Consistent with the involvement of the Cpx regulon in the event of aberrant β-barrel OMP assembly, the expression of cpxP, the archetypal member of the cpx regulon, was upregulated in defective Bam backgrounds or in cells expressing a single assembly-defective β-barrel OMP species. Together, these results showed that both the Cpx and σE regulons are required to reduce envelope stress caused by aberrant β-barrel OMP assembly, with the Cpx regulon principally contributing by controlling degP expression. PMID:20487295

Response to events involving the inadvertent movement or illicit trafficking of radioactive materials

International Nuclear Information System (INIS)

2002-09-01

of Understanding (MOU) (1998) to promote co-operation at the international level in order to improve the control of radioactive materials. At the time of the drafting of this report, a similar MOU between the IAEA and the International Criminal Police Organization (INTERPOL) is pending. There are a number of measures that must be undertaken by States to combat the illicit trafficking and inadvertent movements of radioactive materials. These measures are, generally, shared between the regulatory and law enforcement agencies as part of a State's national arrangements. One of these measures is monitoring for radioactive materials at borders. This Technical Document (TECDOC) provides information to front-line officers on response to events involving the detection of inadvertent movement or illicit trafficking of radioactive materials. The emphasis in this publication is on operational and tactical response measures. These may entail a multi-agency response, particularly at the tactical level. Detailed scientific information has been kept to a minimum as it is recognized that the majority of law enforcement personnel will not have the background necessary to use such information effectively. The prime objective of this TECDOC is to provide Member States with practical information for use by emergency response and law enforcement personnel involved in dealing with incidents of inadvertent movement or illicit trafficking of radioactive materials. The purpose of the response is to regain control of the relevant radioactive materials so that the risk of harm to people and the environment is mitigated. This information is aimed primarily at police, customs and other law enforcement officers who may become involved in incidents concerning inadvertent movement or illicit trafficking of radioactive materials. Effective inter-agency co-operation can only be achieved if personnel who are not normally involved with radiological emergencies are aware of the issues associated with

Response to events involving the inadvertent movement or illicit trafficking of radioactive materials

International Nuclear Information System (INIS)

2004-08-01

of Understanding (MOU) (1998) to promote co-operation at the international level in order to improve the control of radioactive materials. At the time of the drafting of this report, a similar MOU between the IAEA and the International Criminal Police Organization (INTERPOL) is pending. There are a number of measures that must be undertaken by States to combat the illicit trafficking and inadvertent movements of radioactive materials. These measures are, generally, shared between the regulatory and law enforcement agencies as part of a State's national arrangements. One of these measures is monitoring for radioactive materials at borders. This Technical Document (TECDOC) provides information to front-line officers on response to events involving the detection of inadvertent movement or illicit trafficking of radioactive materials. The emphasis in this publication is on operational and tactical response measures. These may entail a multi-agency response, particularly at the tactical level. Detailed scientific information has been kept to a minimum as it is recognized that the majority of law enforcement personnel will not have the background necessary to use such information effectively. The prime objective of this TECDOC is to provide Member States with practical information for use by emergency response and law enforcement personnel involved in dealing with incidents of inadvertent movement or illicit trafficking of radioactive materials. The purpose of the response is to regain control of the relevant radioactive materials so that the risk of harm to people and the environment is mitigated. This information is aimed primarily at police, customs and other law enforcement officers who may become involved in incidents concerning inadvertent movement or illicit trafficking of radioactive materials. Effective inter-agency co-operation can only be achieved if personnel who are not normally involved with radiological emergencies are aware of the issues associated with

Response to events involving the inadvertent movement or illicit trafficking of radioactive materials

International Nuclear Information System (INIS)

2002-08-01

of Understanding (MOU) (1998) to promote co-operation at the international level in order to improve the control of radioactive materials. At the time of the drafting of this report, a similar MOU between the IAEA and the International Criminal Police Organization (INTERPOL) is pending. There are a number of measures that must be undertaken by States to combat the illicit trafficking and inadvertent movements of radioactive materials. These measures are, generally, shared between the regulatory and law enforcement agencies as part of a State's national arrangements. One of these measures is monitoring for radioactive materials at borders. This Technical Document (TECDOC) provides information to front-line officers on response to events involving the detection of inadvertent movement or illicit trafficking of radioactive materials. The emphasis in this publication is on operational and tactical response measures. These may entail a multi-agency response, particularly at the tactical level. Detailed scientific information has been kept to a minimum as it is recognized that the majority of law enforcement personnel will not have the background necessary to use such information effectively. The prime objective of this TECDOC is to provide Member States with practical information for use by emergency response and law enforcement personnel involved in dealing with incidents of inadvertent movement or illicit trafficking of radioactive materials. The purpose of the response is to regain control of the relevant radioactive materials so that the risk of harm to people and the environment is mitigated. This information is aimed primarily at police, customs and other law enforcement officers who may become involved in incidents concerning inadvertent movement or illicit trafficking of radioactive materials. Effective inter-agency co-operation can only be achieved if personnel who are not normally involved with radiological emergencies are aware of the issues associated with

Response to events involving the inadvertent movement or illicit trafficking of radioactive materials

International Nuclear Information System (INIS)

2003-08-01

of Understanding (MOU) (1998) to promote co-operation at the international level in order to improve the control of radioactive materials. At the time of the drafting of this report, a similar MOU between the IAEA and the International Criminal Police Organization (INTERPOL) is pending. There are a number of measures that must be undertaken by States to combat the illicit trafficking and inadvertent movements of radioactive materials. These measures are, generally, shared between the regulatory and law enforcement agencies as part of a State's national arrangements. One of these measures is monitoring for radioactive materials at borders. This Technical Document (TECDOC) provides information to front-line officers on response to events involving the detection of inadvertent movement or illicit trafficking of radioactive materials. The emphasis in this publication is on operational and tactical response measures. These may entail a multi-agency response, particularly at the tactical level. Detailed scientific information has been kept to a minimum as it is recognized that the majority of law enforcement personnel will not have the background necessary to use such information effectively. The prime objective of this TECDOC is to provide Member States with practical information for use by emergency response and law enforcement personnel involved in dealing with incidents of inadvertent movement or illicit trafficking of radioactive materials. The purpose of the response is to regain control of the relevant radioactive materials so that the risk of harm to people and the environment is mitigated. This information is aimed primarily at police, customs and other law enforcement officers who may become involved in incidents concerning inadvertent movement or illicit trafficking of radioactive materials. Effective inter-agency co-operation can only be achieved if personnel who are not normally involved with radiological emergencies are aware of the issues associated with

Synchrotron radiation studies of inorganic-organic semiconductor interfaces

International Nuclear Information System (INIS)

Evans, D.A.; Steiner, H.J.; Vearey-Roberts, A.R.; Bushell, A.; Cabailh, G.; O'Brien, S.; Wells, J.W.; McGovern, I.T.; Dhanak, V.R.; Kampen, T.U.; Zahn, D.R.T.; Batchelor, D.

2003-01-01

Organic semiconductors (polymers and small molecules) are widely used in electronic and optoelectronic technologies. Many devices are based on multilayer structures where interfaces play a central role in device performance and where inorganic semiconductor models are inadequate. Synchrotron radiation techniques such as photoelectron spectroscopy (PES), near-edge X-ray absorption fine structure (NEXAFS) and X-ray standing wave spectroscopy (XSW) provide a powerful means of probing the structural, electronic and chemical properties of these interfaces. The surface-specificity of these techniques allows key properties to be monitored as the heterostructure is fabricated. This methodology has been directed at the growth of hybrid organic-inorganic semiconductor interfaces involving copper phthalocyanine as the model organic material and InSb and GaAs as the model inorganic semiconductor substrates. Core level PES has revealed that these interfaces are abrupt and chemically inert due to the weak bonding between the molecules and the inorganic semiconductor. NEXAFS studies have shown that there is a preferred orientation of the molecules within the organic semiconductor layers. The valence band offsets for the heterojunctions have been directly measured using valence level PES and were found to be very different for copper phthalocyanine on InSb and GaAs (0.7 and -0.3 eV respectively) although an interface dipole is present in both cases

A novel asynchronous access method with binary interfaces

Directory of Open Access Journals (Sweden)

Torres-Solis Jorge

2008-10-01

Full Text Available Abstract Background Traditionally synchronous access strategies require users to comply with one or more time constraints in order to communicate intent with a binary human-machine interface (e.g., mechanical, gestural or neural switches. Asynchronous access methods are preferable, but have not been used with binary interfaces in the control of devices that require more than two commands to be successfully operated. Methods We present the mathematical development and evaluation of a novel asynchronous access method that may be used to translate sporadic activations of binary interfaces into distinct outcomes for the control of devices requiring an arbitrary number of commands to be controlled. With this method, users are required to activate their interfaces only when the device under control behaves erroneously. Then, a recursive algorithm, incorporating contextual assumptions relevant to all possible outcomes, is used to obtain an informed estimate of user intention. We evaluate this method by simulating a control task requiring a series of target commands to be tracked by a model user. Results When compared to a random selection, the proposed asynchronous access method offers a significant reduction in the number of interface activations required from the user. Conclusion This novel access method offers a variety of advantages over traditionally synchronous access strategies and may be adapted to a wide variety of contexts, with primary relevance to applications involving direct object manipulation.

Adverse events associated with pediatric exposures to dextromethorphan.

Science.gov (United States)

Paul, Ian M; Reynolds, Kate M; Kauffman, Ralph E; Banner, William; Bond, G Randall; Palmer, Robert B; Burnham, Randy I; Green, Jody L

2017-01-01

Dextromethorphan is the most common over-the-counter (OTC) antitussive medication. We sought to characterize adverse events associated with dextromethorphan in children dextromethorphan with ≥1 adverse event from multiple U.S. sources (National Poison Data System, FDA Adverse Event Reporting System, manufacturer safety reports, news/media, medical literature) reported between 2008 and 2014. An expert panel determined the relationship between exposure and adverse events, estimated dose ingested, intent of exposure, and identified contributing factors to exposure. 1716 cases contained ≥1 adverse event deemed at least potentially related to dextromethorphan; 1417 were single product exposures. 773/1417 (55%) involved only one single-ingredient dextromethorphan product (dextromethorphan-only). Among dextromethorphan-only cases, 3% followed ingestion of a therapeutic dose; 78% followed an overdose. 69% involved unsupervised self-administration and 60% occurred in children dextromethorphan-only ingestion. Adverse events were predominantly associated with overdose, most commonly affecting the central nervous and autonomic systems.

Microprocessor event analysis in parallel with CAMAC data acquisition

CERN Document Server

Cords, D; Riege, H

1981-01-01

The Plessey MIPROC-16 microprocessor (16 bits, 250 ns execution time) has been connected to a CAMAC System (GEC-ELLIOTT System Crate) and shares the CAMAC access with a Nord-10S computer. Interfaces have been designed and tested for execution of CAMAC cycles, communication with the Nord-10S computer and DMA-transfer from CAMAC to the MIPROC-16 memory. The system is used in the JADE data-acquisition-system at PETRA where it receives the data from the detector in parallel with the Nord-10S computer via DMA through the indirect-data-channel mode. The microprocessor performs an on-line analysis of events and the results of various checks is appended to the event. In case of spurious triggers or clear beam gas events, the Nord-10S buffer will be reset and the event omitted from further processing. (5 refs).

Development of Safety Significance Evaluation Program for Accidents and Events in NPPs

International Nuclear Information System (INIS)

Yang, Hui Chang; Hong, Seok Jin; Cho, Nam Chul; Chung, Dae Wook; Lee, Chang Joo

2010-01-01

To evaluate the significance in terms of safety for the accidents and events occurred in nuclear power plants using probabilistic safety assessment techniques can provide useful insights to the regulator. Based on the quantified risk information of accident or event occurred, regulators can decide which regulatory areas should be focused than the others. To support these regulatory analysis activities, KINS-ASP program was developed. KINS-ASP program can supports the risk increase due to the occurred accidents or events by providing the graphic interfaces and linked quantification engines for the PSA experts and non- PSA acquainted regulators both

Standards for the user interface - Developing a user consensus. [for Space Station Information System

Science.gov (United States)

Moe, Karen L.; Perkins, Dorothy C.; Szczur, Martha R.

1987-01-01

The user support environment (USE) which is a set of software tools for a flexible standard interactive user interface to the Space Station systems, platforms, and payloads is described in detail. Included in the USE concept are a user interface language, a run time environment and user interface management system, support tools, and standards for human interaction methods. The goals and challenges of the USE are discussed as well as a methodology based on prototype demonstrations for involving users in the process of validating the USE concepts. By prototyping the key concepts and salient features of the proposed user interface standards, the user's ability to respond is greatly enhanced.

Theoretical vibrational sum-frequency generation spectroscopy of water near lipid and surfactant monolayer interfaces

Energy Technology Data Exchange (ETDEWEB)

Roy, S.; Gruenbaum, S. M.; Skinner, J. L. [Theoretical Chemistry Institute and Department of Chemistry, 1101 University Ave., University of Wisconsin-Madison, Madison, Wisconsin 53706 (United States)

2014-11-14

Understanding the structure of water near cell membranes is crucial for characterizing water-mediated events such as molecular transport. To obtain structural information of water near a membrane, it is useful to have a surface-selective technique that can probe only interfacial water molecules. One such technique is vibrational sum-frequency generation (VSFG) spectroscopy. As model systems for studying membrane headgroup/water interactions, in this paper we consider lipid and surfactant monolayers on water. We adopt a theoretical approach combining molecular dynamics simulations and phase-sensitive VSFG to investigate water structure near these interfaces. Our simulated spectra are in qualitative agreement with experiments and reveal orientational ordering of interfacial water molecules near cationic, anionic, and zwitterionic interfaces. OH bonds of water molecules point toward an anionic interface leading to a positive VSFG peak, whereas the water hydrogen atoms point away from a cationic interface leading to a negative VSFG peak. Coexistence of these two interfacial water species is observed near interfaces between water and mixtures of cationic and anionic lipids, as indicated by the presence of both negative and positive peaks in their VSFG spectra. In the case of a zwitterionic interface, OH orientation is toward the interface on the average, resulting in a positive VSFG peak.

Interface for safety and security of radioactive sources

International Nuclear Information System (INIS)

Seggane, Richard

2016-04-01

In facilities and activities involving use of radiation sources, safety and security measures have in common the aim of protecting human life and health and the environment. In addition, safety and security measures must be designed and implemented in an integrated manner, so that security measures do not compromise safety and safety measures do not compromise security measures. This work reviewed issues related to establishing a clear interface between safety and security of radiation sources. The Government, the Regulatory Authority and licensee/registrants and other relevant stakeholders should work together and contribute to ensure that safety and security of sources is ensured and well interfaced. A Radiotherapy facility has been used as a case study. (au)

Interface models

DEFF Research Database (Denmark)

Ravn, Anders P.; Staunstrup, Jørgen

1994-01-01

This paper proposes a model for specifying interfaces between concurrently executing modules of a computing system. The model does not prescribe a particular type of communication protocol and is aimed at describing interfaces between both software and hardware modules or a combination of the two....... The model describes both functional and timing properties of an interface...

Trending analysis of precursor events

International Nuclear Information System (INIS)

Watanabe, Norio

1998-01-01

The Accident Sequence Precursor (ASP) Program of United States Nuclear Regulatory Commission (U.S.NRC) identifies and categorizes operational events at nuclear power plants in terms of the potential for core damage. The ASP analysis has been performed on yearly basis and the results have been published in the annual reports. This paper describes the trends in initiating events and dominant sequences for 459 precursors identified in the ASP Program during the 1969-94 period and also discusses a comparison with dominant sequences predicted in the past Probabilistic Risk Assessment (PRA) studies. These trends were examined for three time periods, 1969-81, 1984-87 and 1988-94. Although the different models had been used in the ASP analyses for these three periods, the distribution of precursors by dominant sequences show similar trends to each other. For example, the sequences involving loss of both main and auxiliary feedwater were identified in many PWR events and those involving loss of both high and low coolant injection were found in many BWR events. Also, it was found that these dominant sequences were comparable to those determined to be dominant in the predictions by the past PRAs. As well, a list of the 459 precursors identified are provided in Appendix, indicating initiating event types, unavailable systems, dominant sequences, conditional core damage probabilities, and so on. (author)

Shape-changing interfaces:

DEFF Research Database (Denmark)

Rasmussen, Majken Kirkegård; Pedersen, Esben Warming; Petersen, Marianne Graves

2015-01-01

Shape change is increasingly used in physical user interfaces, both as input and output. Yet, the progress made and the key research questions for shape-changing interfaces are rarely analyzed systematically. We review a sample of existing work on shape-changing interfaces to address these shortc......Shape change is increasingly used in physical user interfaces, both as input and output. Yet, the progress made and the key research questions for shape-changing interfaces are rarely analyzed systematically. We review a sample of existing work on shape-changing interfaces to address...... these shortcomings. We identify eight types of shape that are transformed in various ways to serve both functional and hedonic design purposes. Interaction with shape-changing interfaces is simple and rarely merges input and output. Three questions are discussed based on the review: (a) which design purposes may...

Metasomatism, Fluid Overpressure and Brecciation at the Slab-Mantle Interface: Insights from the Livingstone Fault, New Zealand

Science.gov (United States)

Tarling, M.; Smith, S. A. F.; Scott, J.

2017-12-01

Juxtaposition of mantle peridotite and serpentinite against quartzofeldspathic and mafic schists occurs along the shallow slab-mantle interface in some subduction zones. This part of the subduction interface has been invoked as a possible source region of episodic tremor and slow slip, yet geological observations of fault zone structures and chemical reactions pertinent to this region are quite rare. The >1000 km long Livingstone Fault in New Zealand is a superbly exposed fault zone that provides a suitable analogue (both in terms of scale and the rock types involved) for the shallow slab-mantle interface. The fault is characterized by a foliated and highly sheared serpentinite mélange tens to several hundreds of meters wide that separates (partially serpentinised) peridotites from quartzofeldspathic schists. Talc- and tremolite-forming metasomatic reactions occurred along the margins of the mélange and around entrained pods due to mixing of serpentinite with silica- and calcium-rich fluids derived from the adjacent quartzofeldspathic schist. The metasomatic reactions generated significant volumes of water at the melange-schist contact that became trapped between the two relatively impermeable fault zone lithologies. On the schist side of the contact, brittle faulting was promoted by the formation of a laterally-continuous silicified zone up to tens of metres wide. On the melange side, a zone up to tens of metres wide of `crackle-breccias' containing veined stockworks of tremolite indicates periodic increases of pore pressure sufficient to cause hydraulic fracture of serpentinite. The crackle-breccias are multi-generational indicating that this process was episodic. Sr and Nd isotope data and permeability calculations suggest that the episodic brecciation process was critical to the transfer of fluids across the melange. Our observations suggest that fluid-producing metasomatic reactions along the shallow slab-mantle interface may contribute to the tremor signal

A Hybrid 2D/3D User Interface for Radiological Diagnosis.

Science.gov (United States)

Mandalika, Veera Bhadra Harish; Chernoglazov, Alexander I; Billinghurst, Mark; Bartneck, Christoph; Hurrell, Michael A; Ruiter, Niels de; Butler, Anthony P H; Butler, Philip H

2018-02-01

This paper presents a novel 2D/3D desktop virtual reality hybrid user interface for radiology that focuses on improving 3D manipulation required in some diagnostic tasks. An evaluation of our system revealed that our hybrid interface is more efficient for novice users and more accurate for both novice and experienced users when compared to traditional 2D only interfaces. This is a significant finding because it indicates, as the techniques mature, that hybrid interfaces can provide significant benefit to image evaluation. Our hybrid system combines a zSpace stereoscopic display with 2D displays, and mouse and keyboard input. It allows the use of 2D and 3D components interchangeably, or simultaneously. The system was evaluated against a 2D only interface with a user study that involved performing a scoliosis diagnosis task. There were two user groups: medical students and radiology residents. We found improvements in completion time for medical students, and in accuracy for both groups. In particular, the accuracy of medical students improved to match that of the residents.

TECHNOLOGY OF EDUCATIONAL EVENTS DESIGNING

Directory of Open Access Journals (Sweden)

N. V. Volkova

2017-01-01

Full Text Available The aim of the article is to prove and disclose the essence of the author’s technology of educational events designing.Methodology and methods of research. Methodological basis of work is humanitarian approach. The method of pedagogical modeling was used for the model development of educational events influence on pedagogical activity formation. The content analysis of texts descriptions, case-study method, expert estimations of event projects were applied as the main methods of efficiency confirmation of the technology of educational events design.Results and scientific novelty. The characteristics of an educational event are emphasized by means of an empirical way: opening (what a person opens for himself; generation (a result of a personal action; and participation in creation of something "new" (new communications, relations and experience. The structure of technology of educational events design including work with concepts (an educational event, substantial and procedural components is presented. The technology of educational events designing is considered as the process of the well-grounded choice of designing technologies, mutual activity, pedagogical communication, components of educational activity: contents, methods, means, and organizational forms depending on educational aims due to age-specific peculiarities of participants of the educational event. The main conditions providing successful use of the technology are the involvement into joint cognitive activity of all its participants and importance of the events for each of them that qualitatively change the nature of a cognitive process and generate real transformations of the reality.Practical significance. The author’s experience in teaching testifies to introduction of the module «Technology of Design of Educational Events» into the basic educational subject-module «Design Competence of the Teacher» (degree program «Pedagogical Education», considering this module as

A software Event Summation System for MDSplus

International Nuclear Information System (INIS)

Davis, W.M.; Mastrovito, D.M.; Roney, P.G.; Sichta, P.

2008-01-01

The MDSplus data acquisition and management system uses software events for communication among interdependent processes anywhere on the network. Actions can then be triggered, such as a data-acquisition routine, or analysis or display programs waiting for data. A small amount of data, such as a shot number, can be passed with these events. Since programs sometimes need more than one data set, we developed a system on NSTX to declare composite events using logical AND and OR operations. The system is written in the IDL language, so it can be run on Linux, Macintosh or Windows platforms. Like MDSplus, the Experimental Physics and Industrial Control System (EPICS) is a core component of the NSTX software environment. The Event Summation System provides an IDL-based interface to EPICS. This permits EPICS-aware processes to be synchronized with MDSplus-aware processes, to provide, for example, engineering operators information about physics data acquisition and analysis. Reliability was a more important design consideration than performance for this system; the system's architecture includes features to support this. The system has run for weeks at a time without requiring manual intervention. Hundreds of incoming events per second can be handled reliably. All incoming and declared events are logged with a timestamp. The system can be configured easily through a single, easy-to-read text file

Interface-based software testing

Directory of Open Access Journals (Sweden)

Aziz Ahmad Rais

2016-10-01

Full Text Available Software quality is determined by assessing the characteristics that specify how it should work, which are verified through testing. If it were possible to touch, see, or measure software, it would be easier to analyze and prove its quality. Unfortunately, software is an intangible asset, which makes testing complex. This is especially true when software quality is not a question of particular functions that can be tested through a graphical user interface. The primary objective of software architecture is to design quality of software through modeling and visualization. There are many methods and standards that define how to control and manage quality. However, many IT software development projects still fail due to the difficulties involved in measuring, controlling, and managing software quality. Software quality failure factors are numerous. Examples include beginning to test software too late in the development process, or failing properly to understand, or design, the software architecture and the software component structure. The goal of this article is to provide an interface-based software testing technique that better measures software quality, automates software quality testing, encourages early testing, and increases the software’s overall testability

A graphical user interface for infant ERP analysis.

Science.gov (United States)

Kaatiala, Jussi; Yrttiaho, Santeri; Forssman, Linda; Perdue, Katherine; Leppänen, Jukka

2014-09-01

Recording of event-related potentials (ERPs) is one of the best-suited technologies for examining brain function in human infants. Yet the existing software packages are not optimized for the unique requirements of analyzing artifact-prone ERP data from infants. We developed a new graphical user interface that enables an efficient implementation of a two-stage approach to the analysis of infant ERPs. In the first stage, video records of infant behavior are synchronized with ERPs at the level of individual trials to reject epochs with noncompliant behavior and other artifacts. In the second stage, the interface calls MATLAB and EEGLAB (Delorme & Makeig, Journal of Neuroscience Methods 134(1):9-21, 2004) functions for further preprocessing of the ERP signal itself (i.e., filtering, artifact removal, interpolation, and rereferencing). Finally, methods are included for data visualization and analysis by using bootstrapped group averages. Analyses of simulated and real EEG data demonstrated that the proposed approach can be effectively used to establish task compliance, remove various types of artifacts, and perform representative visualizations and statistical comparisons of ERPs. The interface is available for download from http://www.uta.fi/med/icl/methods/eeg.html in a format that is widely applicable to ERP studies with special populations and open for further editing by users.

Suicide and Murder-Suicide Involving Aircraft.

Science.gov (United States)

Kenedi, Christopher; Friedman, Susan Hatters; Watson, Dougal; Preitner, Claude

2016-04-01

This is a systematic review of suicide and homicide-suicide events involving aircraft. In aeromedical literature and in the media, these very different events are both described as pilot suicide, but in psychiatry they are considered separate events with distinct risk factors. Medical databases, internet search engines, and aviation safety databases were searched in a systematic way to obtain relevant cases. Relevant articles were searched for additional references. There were 65 cases of pilot suicide and 6 cases of passengers who jumped from aircraft found. There were also 18 cases of homicide-suicide found involving 732 deaths. Pilots perpetrated 13 homicide-suicide events. Compared to non-aviation samples, a large percentage of pilot suicides in this study were homicide-suicides (17%). Homicide-suicide events occur extremely rarely. However, their impact in terms of the proportion of deaths is significant when compared to deaths from accidents. There is evidence of clustering where pilot suicides occur after by media reports of suicide or homicide-suicide. Five of six homicide-suicide events by pilots of commercial airliners occurred after they were left alone in the cockpit. This, along with a sixth incident in which active intervention by a Japan Air crew saved 147 lives, suggests that having two flight members in the cockpit is potentially protective. No single factor was associated with the risk for suicide or homicide-suicide. Factors associated with both events included legal and financial crises, occupational conflict, mental illness, and relationship stressors. Drugs and/or alcohol played a role in almost half of suicides, but not in homicide-suicides.

The impact of emotional involvement on online service buying decisions: an event-related potentials perspective.

Science.gov (United States)

Zhao, Meina; Wang, Jing; Han, Weiwei

2015-12-02

When examining a buying process, changes in human brain signals and their event-related potential (ERP) components can be considered a reflection of the consumers' emotions. In this experiment, participants were shown 12 products and related services that were available for purchase. After recording ERP components, we used a questionnaire to measure the individuals' emotional involvement toward the services (i.e. the same services shown in the stimuli) of the 12 products to measure the emotional valence of the services. The emotional ERP components and the late positive potential (LPP) were elicited under the service conditions and distributed over the left frontal regions. We determined that the services may evoke an LPP and that services with a high emotional value may evoke a larger LPP, which suggests that positive emotion may be measured using the LPP amplitude in the left frontal regions. This result helps elucidate whether positive emotions are stimulated during the product-service system decision-making process and helps understand the emotional valences of different services. Our analysis of the emotional motivation of the consumer suggests that the LPP may be useful as an emotional indicator for measuring consumers' evaluation of services that provides a neural view of product-service system buying decisions.

Studies on switch-based event building systems in RD13

International Nuclear Information System (INIS)

Bee, C.P.; Eshghi, S.; Jones, R.

1996-01-01

One of the goals of the RD13 project at CERN is to investigate the feasibility of parallel event building system for detectors at the LHC. Studies were performed by building a prototype based on the HiPPI standard and by modeling this prototype and extended architectures with MODSIM II. The prototype used commercially available VME-HiPPI interfaces and a HiPPI switch together with a modular software. The setup was tested successfully as a parallel event building system in different configurations and with different data flow control schemes. The simulation program was used with realistic parameters from the prototype measurements to simulate large-scale event building systems. This includes simulations of a realistic setup of the ATLAS event building system. The influence of different parameters and scaling behavior were investigated. The influence of realistic event size distributions was checked with data from off-line simulations. Different control schemes for destination assignment and traffic shaping were investigated as well as a two-stage event building system. (author)

Assessing traumatic event exposure: general issues and preliminary findings for the Stressful Life Events Screening Questionnaire.

Science.gov (United States)

Goodman, L A; Corcoran, C; Turner, K; Yuan, N; Green, B L

1998-07-01

This article reviews the psychometric properties of the Stressful Life Events Screening Questionnaire (SLESQ), a recently developed trauma history screening measure, and discusses the complexities involved in assessing trauma exposure. There are relatively few general measures of exposure to a variety of types of traumatic events, and most of those that exist have not been subjected to rigorous psychometric evaluation. The SLESQ showed good test-retest reliability, with a median kappa of .73, adequate convergent validity (with a lengthier interview) with a median kappa of .64, and good discrimination between Criterion A and non-Criterion A events. The discussion addresses some of the challenges of assessing traumatic event exposure along the dimensions of defining traumatic events, assessment methodologies, reporting consistency, and incident validation.

SPIKY: a graphical user interface for monitoring spike train synchrony.

Science.gov (United States)

Kreuz, Thomas; Mulansky, Mario; Bozanic, Nebojsa

2015-05-01

Techniques for recording large-scale neuronal spiking activity are developing very fast. This leads to an increasing demand for algorithms capable of analyzing large amounts of experimental spike train data. One of the most crucial and demanding tasks is the identification of similarity patterns with a very high temporal resolution and across different spatial scales. To address this task, in recent years three time-resolved measures of spike train synchrony have been proposed, the ISI-distance, the SPIKE-distance, and event synchronization. The Matlab source codes for calculating and visualizing these measures have been made publicly available. However, due to the many different possible representations of the results the use of these codes is rather complicated and their application requires some basic knowledge of Matlab. Thus it became desirable to provide a more user-friendly and interactive interface. Here we address this need and present SPIKY, a graphical user interface that facilitates the application of time-resolved measures of spike train synchrony to both simulated and real data. SPIKY includes implementations of the ISI-distance, the SPIKE-distance, and the SPIKE-synchronization (an improved and simplified extension of event synchronization) that have been optimized with respect to computation speed and memory demand. It also comprises a spike train generator and an event detector that makes it capable of analyzing continuous data. Finally, the SPIKY package includes additional complementary programs aimed at the analysis of large numbers of datasets and the estimation of significance levels. Copyright © 2015 the American Physiological Society.

Water at Interfaces.

Science.gov (United States)

Björneholm, Olle; Hansen, Martin H; Hodgson, Andrew; Liu, Li-Min; Limmer, David T; Michaelides, Angelos; Pedevilla, Philipp; Rossmeisl, Jan; Shen, Huaze; Tocci, Gabriele; Tyrode, Eric; Walz, Marie-Madeleine; Werner, Josephina; Bluhm, Hendrik

2016-07-13

The interfaces of neat water and aqueous solutions play a prominent role in many technological processes and in the environment. Examples of aqueous interfaces are ultrathin water films that cover most hydrophilic surfaces under ambient relative humidities, the liquid/solid interface which drives many electrochemical reactions, and the liquid/vapor interface, which governs the uptake and release of trace gases by the oceans and cloud droplets. In this article we review some of the recent experimental and theoretical advances in our knowledge of the properties of aqueous interfaces and discuss open questions and gaps in our understanding.

Garbage collector interface

OpenAIRE

Ive, Anders; Blomdell, Anders; Ekman, Torbjörn; Henriksson, Roger; Nilsson, Anders; Nilsson, Klas; Robertz, Sven

2002-01-01

The purpose of the presented garbage collector interface is to provide a universal interface for many different implementations of garbage collectors. This is to simplify the integration and exchange of garbage collectors, but also to support incremental, non-conservative, and thread safe implementations. Due to the complexity of the interface, it is aimed at code generators and preprocessors. Experiences from ongoing implementations indicate that the garbage collector interface successfully ...

Modelling biological invasions: Individual to population scales at interfaces

KAUST Repository

Belmonte-Beitia, J.

2013-10-01

Extracting the population level behaviour of biological systems from that of the individual is critical in understanding dynamics across multiple scales and thus has been the subject of numerous investigations. Here, the influence of spatial heterogeneity in such contexts is explored for interfaces with a separation of the length scales characterising the individual and the interface, a situation that can arise in applications involving cellular modelling. As an illustrative example, we consider cell movement between white and grey matter in the brain which may be relevant in considering the invasive dynamics of glioma. We show that while one can safely neglect intrinsic noise, at least when considering glioma cell invasion, profound differences in population behaviours emerge in the presence of interfaces with only subtle alterations in the dynamics at the individual level. Transport driven by local cell sensing generates predictions of cell accumulations along interfaces where cell motility changes. This behaviour is not predicted with the commonly used Fickian diffusion transport model, but can be extracted from preliminary observations of specific cell lines in recent, novel, cryo-imaging. Consequently, these findings suggest a need to consider the impact of individual behaviour, spatial heterogeneity and especially interfaces in experimental and modelling frameworks of cellular dynamics, for instance in the characterisation of glioma cell motility. © 2013 Elsevier Ltd.

Modelling biological invasions: Individual to population scales at interfaces

KAUST Repository

Belmonte-Beitia, J.; Woolley, T.E.; Scott, J.G.; Maini, P.K.; Gaffney, E.A.

2013-01-01

Extracting the population level behaviour of biological systems from that of the individual is critical in understanding dynamics across multiple scales and thus has been the subject of numerous investigations. Here, the influence of spatial heterogeneity in such contexts is explored for interfaces with a separation of the length scales characterising the individual and the interface, a situation that can arise in applications involving cellular modelling. As an illustrative example, we consider cell movement between white and grey matter in the brain which may be relevant in considering the invasive dynamics of glioma. We show that while one can safely neglect intrinsic noise, at least when considering glioma cell invasion, profound differences in population behaviours emerge in the presence of interfaces with only subtle alterations in the dynamics at the individual level. Transport driven by local cell sensing generates predictions of cell accumulations along interfaces where cell motility changes. This behaviour is not predicted with the commonly used Fickian diffusion transport model, but can be extracted from preliminary observations of specific cell lines in recent, novel, cryo-imaging. Consequently, these findings suggest a need to consider the impact of individual behaviour, spatial heterogeneity and especially interfaces in experimental and modelling frameworks of cellular dynamics, for instance in the characterisation of glioma cell motility. © 2013 Elsevier Ltd.

In situ analytical techniques for battery interface analysis.

Science.gov (United States)

Tripathi, Alok M; Su, Wei-Nien; Hwang, Bing Joe

2018-02-05

Lithium-ion batteries, simply known as lithium batteries, are distinct among high energy density charge-storage devices. The power delivery of batteries depends upon the electrochemical performances and the stability of the electrode, electrolytes and their interface. Interfacial phenomena of the electrode/electrolyte involve lithium dendrite formation, electrolyte degradation and gas evolution, and a semi-solid protective layer formation at the electrode-electrolyte interface, also known as the solid-electrolyte interface (SEI). The SEI protects electrodes from further exfoliation or corrosion and suppresses lithium dendrite formation, which are crucial needs for enhancing the cell performance. This review covers the compositional, structural and morphological aspects of SEI, both artificially and naturally formed, and metallic dendrites using in situ/in operando cells and various in situ analytical tools. Critical challenges and the historical legacy in the development of in situ/in operando electrochemical cells with some reports on state-of-the-art progress are particularly highlighted. The present compilation pinpoints the emerging research opportunities in advancing this field and concludes on the future directions and strategies for in situ/in operando analysis.

Nuclear fuels accounting interface: River Bend experience

International Nuclear Information System (INIS)

Barry, J.E.

1986-01-01

This presentation describes nuclear fuel accounting activities from the perspective of nuclear fuels management and its interfaces. Generally, Nuclear Fuels-River Bend Nuclear Group (RBNG) is involved on a day-by-day basis with nuclear fuel materials accounting in carrying out is procurement, contract administration, processing, and inventory management duties, including those associated with its special nuclear materials (SNM)-isotopics accountability oversight responsibilities as the Central Accountability Office for the River Bend Station. As much as possible, these duties are carried out in an integrated, interdependent manner. From these primary functions devolve Nuclear Fuels interfacing activities with fuel cost and tax accounting. Noting that nuclear fuel tax accounting support is of both an esoteric and intermittent nature, Nuclear Fuels-RBNG support of developments and applications associated with nuclear fuel cost accounting is stressed in this presentation

Touch Is Everywhere: Floor Surfaces as Ambient Haptic Interfaces.

Science.gov (United States)

Visell, Y; Law, A; Cooperstock, J R

2009-01-01

Floor surfaces are notable for the diverse roles that they play in our negotiation of everyday environments. Haptic communication via floor surfaces could enhance or enable many computer-supported activities that involve movement on foot. In this paper, we discuss potential applications of such interfaces in everyday environments and present a haptically augmented floor component through which several interaction methods are being evaluated. We describe two approaches to the design of structured vibrotactile signals for this device. The first is centered on a musical phrase metaphor, as employed in prior work on tactile display. The second is based upon the synthesis of rhythmic patterns of virtual physical impact transients. We report on an experiment in which participants were able to identify communication units that were constructed from these signals and displayed via a floor interface at well above chance levels. The results support the feasibility of tactile information display via such interfaces and provide further indications as to how to effectively design vibrotactile signals for them.

Safeguards Summary Event List (SSEL), January 1, 1990--December 31, 1991

International Nuclear Information System (INIS)

Yardumian, J.; Fadden, M.

1992-07-01

The Safeguards Summary Event List (SSEL), Vol. 2, provides brief summaries of several hundred safeguards-related events involving nuclear material or facilities regulated by the US Nuclear Regulatory Commission (NRC) which occurred and were reported from January 1, 1990 through December 31, 1991. Because of public interest, the Miscellaneous category includes a few events which involve either source material, byproduct material, or natural uranium which are exempt from safeguards requirements. Events are described under the categories of bomb-related, intrusion, missing and/or allegedly stolen, transportation, tampering/vandalism, arson, firearms, radiological sabotage, nonradiological sabotage, and miscellaneous. The information contained in the event descriptions is derived primarily from official NRC reporting channels

Safeguards Summary Event List (SSEL), pre-NRC through December 31, 1989

International Nuclear Information System (INIS)

1992-07-01

The Safeguards Summary Event List (SSEL), Vol. 1, provides brief summaries of several hundred safeguards-related events involving nuclear material or facilities regulated by the US Nuclear Regulatory Commission (NRC) which occurred and were reported from pre-NRC through December 31, 1989. Because of public interest, the Miscellaneous category includes a few events which involve either source material, byproduct material, or natural uranium which are exempt from safeguards requirements. Events are described under the categories of bomb-related, intrusion, missing and/or allegedly stolen, transportation, tampering/vandalism, arson, firearms, radiological sabotage, nonradiological sabotage, and miscellaneous. The information contained in the event descriptions is derived primarily from official NRC reporting channels

Design approach of seismic interface for cryoline with Tokamak building for ITER

International Nuclear Information System (INIS)

Badgujar, S.; Sarkar, B.; Vaghela, H.; Shah, N.; Naik, H.B.

2012-01-01

ITER Tokamak building is designed with seismic isolation pads to protect the Tokamak components from seismic events. Two main cryolines, designated as cryolines between buildings (Mg and CP), runs from interconnection box in cryoplant building to the Tokamak building. The lines outside Tokamak building are supported by seismically non-isolated supports. The cryoline design at the interface between seismically isolated and non-isolated support systems needs to be studied to fulfill the functional requirements. One of the options for interface, universal expansion joint has been modeled in CATIA with actual thickness of each ply and inter-ply distance, analyzed in ANSYS using contact definition, as a part of the preliminary study. The bellows have been checked by design calculation as per EJMA standard for the specified movements. The paper will present approach for conceptual design of interface, problem definition and boundary conditions, methodology for analysis and preliminary results of stress pattern for expansion joints. (author)

Absolute GPS Time Event Generation and Capture for Remote Locations

Science.gov (United States)

HIRES Collaboration

The HiRes experiment operates fixed location and portable lasers at remote desert locations to generate calibration events. One physics goal of HiRes is to search for unusual showers. These may appear similar to upward or horizontally pointing laser tracks used for atmospheric calibration. It is therefore necessary to remove all of these calibration events from the HiRes detector data stream in a physics blind manner. A robust and convenient "tagging" method is to generate the calibration events at precisely known times. To facilitate this tagging method we have developed the GPSY (Global Positioning System YAG) module. It uses a GPS receiver, an embedded processor and additional timing logic to generate laser triggers at arbitrary programmed times and frequencies with better than 100nS accuracy. The GPSY module has two trigger outputs (one microsecond resolution) to trigger the laser flash-lamp and Q-switch and one event capture input (25nS resolution). The GPSY module can be programmed either by a front panel menu based interface or by a host computer via an RS232 serial interface. The latter also allows for computer logging of generated and captured event times. Details of the design and the implementation of these devices will be presented. 1 Motivation Air Showers represent a small fraction, much less than a percent, of the total High Resolution Fly's Eye data sample. The bulk of the sample is calibration data. Most of this calibration data is generated by two types of systems that use lasers. One type sends light directly to the detectors via optical fibers to monitor detector gains (Girard 2001). The other sends a beam of light into the sky and the scattered light that reaches the detectors is used to monitor atmospheric effects (Wiencke 1998). It is important that these calibration events be cleanly separated from the rest of the sample both to provide a complete set of monitoring information, and more

A review for identification of initiating events in event tree development process on nuclear power plants

International Nuclear Information System (INIS)

Riyadi, Eko H.

2014-01-01

Initiating event is defined as any event either internal or external to the nuclear power plants (NPPs) that perturbs the steady state operation of the plant, if operating, thereby initiating an abnormal event such as transient or loss of coolant accident (LOCA) within the NPPs. These initiating events trigger sequences of events that challenge plant control and safety systems whose failure could potentially lead to core damage or large early release. Selection for initiating events consists of two steps i.e. first step, definition of possible events, such as by evaluating a comprehensive engineering, and by constructing a top level logic model. Then the second step, grouping of identified initiating event's by the safety function to be performed or combinations of systems responses. Therefore, the purpose of this paper is to discuss initiating events identification in event tree development process and to reviews other probabilistic safety assessments (PSA). The identification of initiating events also involves the past operating experience, review of other PSA, failure mode and effect analysis (FMEA), feedback from system modeling, and master logic diagram (special type of fault tree). By using the method of study for the condition of the traditional US PSA categorization in detail, could be obtained the important initiating events that are categorized into LOCA, transients and external events

Objects, Events and "to Be" Verbs in Spanish--An ERP Study of the Syntax-Semantics Interface

Science.gov (United States)

Leone-Fernandez, Barbara; Molinaro, Nicola; Carreiras, Manuel; Barber, Horacio A.

2012-01-01

In Spanish, objects and events at subject position constrain the selection of different forms of the auxiliary verb "to be": locative predicates about objects require "estar en", while those relating to events require "ser en", both translatable as "to be in". Subjective ratings showed that while the "object + ser + en" is considered as incorrect,…

Dependency models and probability of joint events

International Nuclear Information System (INIS)

Oerjasaeter, O.

1982-08-01

Probabilistic dependencies between components/systems are discussed with reference to a broad classification of potential failure mechanisms. Further, a generalized time-dependency model, based on conditional probabilities for estimation of the probability of joint events and event sequences is described. The applicability of this model is clarified/demonstrated by various examples. It is concluded that the described model of dependency is a useful tool for solving a variety of practical problems concerning the probability of joint events and event sequences where common cause and time-dependent failure mechanisms are involved. (Auth.)

High-bandwidth memory interface

CERN Document Server

Kim, Chulwoo; Song, Junyoung

2014-01-01

This book provides an overview of recent advances in memory interface design at both the architecture and circuit levels. Coverage includes signal integrity and testing, TSV interface, high-speed serial interface including equalization, ODT, pre-emphasis, wide I/O interface including crosstalk, skew cancellation, and clock generation and distribution. Trends for further bandwidth enhancement are also covered.   • Enables readers with minimal background in memory design to understand the basics of high-bandwidth memory interface design; • Presents state-of-the-art techniques for memory interface design; • Covers memory interface design at both the circuit level and system architecture level.

Decision Support for Flood Event Prediction and Monitoring

DEFF Research Database (Denmark)

Mioc, Darka; Anton, François; Liang, Gengsheng

2007-01-01

In this paper the development of Web GIS based decision support system for flood events is presented. To improve flood prediction we developed the decision support system for flood prediction and monitoring that integrates hydrological modelling and CARIS GIS. We present the methodology for data...... integration, floodplain delineation, and online map interfaces. Our Web-based GIS model can dynamically display observed and predicted flood extents for decision makers and the general public. The users can access Web-based GIS that models current flood events and displays satellite imagery and digital...... elevation model integrated with flood plain area. The system can show how the flooding prediction based on the output from hydrological modeling for the next 48 hours along the lower Saint John River Valley....

Aerobic methanotrophic communities at the Red Sea brine-seawater interface

Directory of Open Access Journals (Sweden)

Rehab Z. Abdallah

2014-09-01

Full Text Available The central rift of the Red Sea contains 25 brine pools with different physicochemical conditions, dictating the diversity and abundance of the microbial community. Three of these pools, the Atlantis II, Kebrit and Discovery Deeps, are uniquely characterized by a high concentration of hydrocarbons. The brine-seawater interface, described as an anoxic-oxic (brine-seawater boundary, is characterized by a high methane concentration, thus favoring aerobic methane oxidation. The current study analyzed the aerobic free–living methane-oxidizing bacterial communities that potentially contribute to methane oxidation at the brine-seawater interfaces of the three aforementioned brine pools, using metagenomic pyrosequencing, 16S rRNA pyrotags and pmoA library constructs. The sequencing of 16S rRNA pyrotags revealed that these interfaces are characterized by high microbial community diversity. Signatures of aerobic methane-oxidizing bacteria were detected in the Atlantis II Interface (ATII-I and the Kebrit Deep Upper (KB-U and Lower (KB-L brine-seawater interfaces. Through phylogenetic analysis of pmoA, we further demonstrated that the ATII-I aerobic methanotroph community is highly diverse. We propose four ATII-I pmoA clusters. Most importantly, cluster 2 groups with marine methane seep methanotrophs, and cluster 4 represent a unique lineage of an uncultured bacterium with divergent alkane monooxygenases. Moreover, non-metric multidimensional scaling (NMDS based on the ordination of putative enzymes involved in methane metabolism showed that the Kebrit interface layers were distinct from the ATII-I and DD-I brine-seawater interfaces.

CLICs-dependent chloride efflux is an essential and proximal upstream event for NLRP3 inflammasome activation.

Science.gov (United States)

Tang, Tiantian; Lang, Xueting; Xu, Congfei; Wang, Xiaqiong; Gong, Tao; Yang, Yanqing; Cui, Jun; Bai, Li; Wang, Jun; Jiang, Wei; Zhou, Rongbin

2017-08-04

The NLRP3 inflammasome can sense different pathogens or danger signals, and has been reported to be involved in the development of many human diseases. Potassium efflux and mitochondrial damage are both reported to mediate NLRP3 inflammasome activation, but the underlying, orchestrating signaling events are still unclear. Here we show that chloride intracellular channels (CLIC) act downstream of the potassium efflux-mitochondrial reactive oxygen species (ROS) axis to promote NLRP3 inflammasome activation. NLRP3 agonists induce potassium efflux, which causes mitochondrial damage and ROS production. Mitochondrial ROS then induces the translocation of CLICs to the plasma membrane for the induction of chloride efflux to promote NEK7-NLRP3 interaction, inflammasome assembly, caspase-1 activation, and IL-1β secretion. Thus, our results identify CLICs-dependent chloride efflux as an essential and proximal upstream event for NLRP3 activation.The NLRP3 inflammasome is key to the regulation of innate immunity against pathogens or stress, but the underlying signaling regulation is still unclear. Here the authors show that chloride intracellular channels (CLIC) interface between mitochondria stress and inflammasome activation to modulate inflammatory responses.

Water at Interfaces

DEFF Research Database (Denmark)

Björneholm, Olle; Hansen, Martin Hangaard; Hodgson, Andrew

2016-01-01

The interfaces of neat water and aqueous solutions play a prominent role in many technological processes and in the environment. Examples of aqueous interfaces are ultrathin water films that cover most hydrophilic surfaces under ambient relative humidities, the liquid/solid interface which drives...

Science at the interface

International Nuclear Information System (INIS)

Knorr Cetina, K.

2004-01-01

the stakes against those who might want to enter. Laboratory sciences interface nature in a peculiar way: by barring real natural objects from entering the lab and by substituting for them reconfigured versions of these objects to work with in research. These supplemental versions of natural objects do refer back to natural processes or conditions, but at the same time they are also autonomous new objects and processes with differential qualities and reproductive powers within laboratory contexts. Laboratory sciences have the disadvantage that their products must be freshly contextualized when they leave the lab to reenter natural environments. In the natural sciences, re-contextualization is often accomplished by transferring some of the conditions that obtained in the lab onto the natural environment. Re-contextualization in the natural sciences may also just be a metaphor for a long chain of processes, involving specialized disciplines, by which some natural scientific results are used to create technologies which are then used in practice - a process that often fails, involves political strategies of persuasion and other complications. Contextualization involves adaptation not only to new laboratory external physical environments but also to the social world. One direction of social science research maintains that a form of (re) contextualization of a much larger scope and impact is evident today in contemporary societies, affecting in tendency all sciences and technological fields. This assessment is encapsulated in the idea that we have progressed from Mode 1 science and technology to a Mode 2 situation where knowledge is generated in the context of application and implication. (author)

Fostering learners' interaction with content: A learner-centered mobile device interface

Science.gov (United States)

Abdous, M.

2015-12-01

With the ever-increasing omnipresence of mobile devices in student life, leveraging smart devices to foster students' interaction with course content is critical. Following a learner-centered design iterative approach, we designed a mobile interface that may enable learners to access and interact with online course content efficiently and intuitively. Our design process leveraged recent technologies, such as bootstrap, Google's Material Design, HTML5, and JavaScript to design an intuitive, efficient, and portable mobile interface with a variety of built-in features, including context sensitive bookmarking, searching, progress tracking, captioning, and transcript display. The mobile interface also offers students the ability to ask context-related questions and to complete self-checks as they watch audio/video presentations. Our design process involved ongoing iterative feedback from learners, allowing us to refine and tweak the interface to provide learners with a unified experience across platforms and devices. The innovative combination of technologies built around well-structured and well-designed content seems to provide an effective learning experience to mobile learners. Early feedback indicates a high level of satisfaction with the interface's efficiency, intuitiveness, and robustness from both students and faculty.

What will this do to me and my brain? Ethical issues in brain-to-brain interfacing

Directory of Open Access Journals (Sweden)

Elisabeth eHildt

2015-02-01

Full Text Available For several years now, brain-computer interfaces (BCIs in which brain signals are used to navigate a computer, a prostheses or a technical device, have been developed in various experimental contexts (Wolpaw & Wolpaw 2012; Grübler & Hildt 2014. Researchers have recently taken the next step and run experiments based on connections between two brains. These so-called brain-to-brain interfaces (abbreviation: BBIs or BTBIs involve not only a BCI component deriving information from a brain and sending it to a computer, but also a computer-brain interface (CBI component delivering information to another brain. What results is technology-mediated brain-to-brain communication (B2B communication, i.e. direct communication between two brains that does not involve any activity of the peripheral nervous system. In what follows, ethical issues that arise in neural interfacing will be discussed after a short introduction to recent BBI experiments. In this, the focus will be on the implications BBIs may have on the individual at the CBI side of the BBI, i.e. on the recipient.

Interpretation of unusual events from CERN and DESY

International Nuclear Information System (INIS)

Hall, L.J.; Jaffee, R.L.; Rosner, J.L.

1984-01-01

Several classes of interesting and unusual events from the Sp-barpS and from PETRA are studied with two purposes in mind. Firstly, varieties of background within the standard SU(3)xSU(2)xU(1) model are described, together with estimates of the number of expected events. Secondly, a review of the recent explanations of the events involving new physics is given. Critical assessments of these proposals focus on the assumptions made, expected rates for the unusual events, and the ability to account for events of several categories

HCIDL: Human-computer interface description language for multi-target, multimodal, plastic user interfaces

Directory of Open Access Journals (Sweden)

Lamia Gaouar

2018-06-01

Full Text Available From the human-computer interface perspectives, the challenges to be faced are related to the consideration of new, multiple interactions, and the diversity of devices. The large panel of interactions (touching, shaking, voice dictation, positioning … and the diversification of interaction devices can be seen as a factor of flexibility albeit introducing incidental complexity. Our work is part of the field of user interface description languages. After an analysis of the scientific context of our work, this paper introduces HCIDL, a modelling language staged in a model-driven engineering approach. Among the properties related to human-computer interface, our proposition is intended for modelling multi-target, multimodal, plastic interaction interfaces using user interface description languages. By combining plasticity and multimodality, HCIDL improves usability of user interfaces through adaptive behaviour by providing end-users with an interaction-set adapted to input/output of terminals and, an optimum layout. Keywords: Model driven engineering, Human-computer interface, User interface description languages, Multimodal applications, Plastic user interfaces

Negligence and Athletic Events.

Science.gov (United States)

Mawdsley, Ralph D.

2001-01-01

Although athletic events generate their share of negligence lawsuits, the relatively small number, compared with other education areas, suggests that defenses (like assumption or risk and contributory negligence) have a better fit in athletics. Implications of newer litigation trends involving coaches' misconduct and interpretation of state…

LabVIEW Interface for PCI-SpaceWire Interface Card

Science.gov (United States)

Lux, James; Loya, Frank; Bachmann, Alex

2005-01-01

This software provides a LabView interface to the NT drivers for the PCISpaceWire card, which is a peripheral component interface (PCI) bus interface that conforms to the IEEE-1355/ SpaceWire standard. As SpaceWire grows in popularity, the ability to use SpaceWire links within LabVIEW will be important to electronic ground support equipment vendors. In addition, there is a need for a high-level LabVIEW interface to the low-level device- driver software supplied with the card. The LabVIEW virtual instrument (VI) provides graphical interfaces to support all (1) SpaceWire link functions, including message handling and routing; (2) monitoring as a passive tap using specialized hardware; and (3) low-level access to satellite mission-control subsystem functions. The software is supplied in a zip file that contains LabVIEW VI files, which provide various functions of the PCI-SpaceWire card, as well as higher-link-level functions. The VIs are suitably named according to the matching function names in the driver manual. A number of test programs also are provided to exercise various functions.

Targeting the SH2-kinase interface in Bcr-Abl inhibits leukemogenesis.

Science.gov (United States)

Grebien, Florian; Hantschel, Oliver; Wojcik, John; Kaupe, Ines; Kovacic, Boris; Wyrzucki, Arkadiusz M; Gish, Gerald D; Cerny-Reiterer, Sabine; Koide, Akiko; Beug, Hartmut; Pawson, Tony; Valent, Peter; Koide, Shohei; Superti-Furga, Giulio

2011-10-14

Chronic myelogenous leukemia (CML) is caused by the constitutively active tyrosine kinase Bcr-Abl and treated with the tyrosine kinase inhibitor (TKI) imatinib. However, emerging TKI resistance prevents complete cure. Therefore, alternative strategies targeting regulatory modules of Bcr-Abl in addition to the kinase active site are strongly desirable. Here, we show that an intramolecular interaction between the SH2 and kinase domains in Bcr-Abl is both necessary and sufficient for high catalytic activity of the enzyme. Disruption of this interface led to inhibition of downstream events critical for CML signaling and, importantly, completely abolished leukemia formation in mice. Furthermore, disruption of the SH2-kinase interface increased sensitivity of imatinib-resistant Bcr-Abl mutants to TKI inhibition. An engineered Abl SH2-binding fibronectin type III monobody inhibited Bcr-Abl kinase activity both in vitro and in primary CML cells, where it induced apoptosis. This work validates the SH2-kinase interface as an allosteric target for therapeutic intervention. Copyright © 2011 Elsevier Inc. All rights reserved.

User Interface History

DEFF Research Database (Denmark)

Jørgensen, Anker Helms; Myers, Brad A

2008-01-01

User Interfaces have been around as long as computers have existed, even well before the field of Human-Computer Interaction was established. Over the years, some papers on the history of Human-Computer Interaction and User Interfaces have appeared, primarily focusing on the graphical interface e...

Catalyzed reactions at illuminated semiconductor interfaces

International Nuclear Information System (INIS)

Wrighton, M.S.

1984-01-01

Many desirable minority carrier chemical redox processes are too slow to compete with e - -h + recombination at illuminated semiconductor/liquid electrolyte junction interfaces. Reductions of H 2 O to H 2 or CO 2 to compounds having C--H bonds are too slow to compete with e - -h + recombination at illuminated p-type semiconductors, for example. Approaches to improve the rate of the desired processes involving surface modification techniques are described. Photoanodes are plagued by the additional problem of oxidative decomposition under illumination with > or =E/sub g/ illumination. The photo-oxidation of Cl - , Br - , and H 2 O is considered to illustrate the concepts involved. Proof of concept experiments establish that catalysis can be effective in dramatically improving direct solar fuel production; efficiencies of >10% have been demonstrated

Interface Magnetoelectric Coupling in Co/Pb(Zr,Ti)O3.

Science.gov (United States)

Vlašín, Ondřej; Jarrier, Romain; Arras, Rémi; Calmels, Lionel; Warot-Fonrose, Bénédicte; Marcelot, Cécile; Jamet, Matthieu; Ohresser, Philippe; Scheurer, Fabrice; Hertel, Riccardo; Herranz, Gervasi; Cherifi-Hertel, Salia

2016-03-23

Magnetoelectric coupling at multiferroic interfaces is a promising route toward the nonvolatile electric-field control of magnetization. Here, we use optical measurements to study the static and dynamic variations of the interface magnetization induced by an electric field in Co/PbZr0.2Ti0.8O3 (Co/PZT) bilayers at room temperature. The measurements allow us to identify different coupling mechanisms. We further investigate the local electronic and magnetic structure of the interface by means of transmission electron microscopy, soft X-ray magnetic circular dichroism, and density functional theory to corroborate the coupling mechanism. The measurements demonstrate a mixed linear and quadratic optical response to the electric field, which results from a magneto-electro-optical effect. We propose a decomposition method of the optical signal to discriminate between different components involved in the electric field-induced polarization rotation of the reflected light. This allows us to extract a signal that we can ascribe to interface magnetoelectric coupling. The associated surface magnetization exhibits a clear hysteretic variation of odd symmetry with respect to the electric field and nonzero remanence. The interface coupling is remarkably stable over a wide frequency range (1-50 kHz), and the application of a bias magnetic field is not necessary for the coupling to occur. These results show the potential of exploiting interface coupling with the prospect of optimizing the performance of magnetoelectric memory devices in terms of stability, as well as fast and dissipationless operation.

Influence of P300 latency jitter on event related potential-based brain-computer interface performance

Science.gov (United States)

Aricò, P.; Aloise, F.; Schettini, F.; Salinari, S.; Mattia, D.; Cincotti, F.

2014-06-01

Objective. Several ERP-based brain-computer interfaces (BCIs) that can be controlled even without eye movements (covert attention) have been recently proposed. However, when compared to similar systems based on overt attention, they displayed significantly lower accuracy. In the current interpretation, this is ascribed to the absence of the contribution of short-latency visual evoked potentials (VEPs) in the tasks performed in the covert attention modality. This study aims to investigate if this decrement (i) is fully explained by the lack of VEP contribution to the classification accuracy; (ii) correlates with lower temporal stability of the single-trial P300 potentials elicited in the covert attention modality. Approach. We evaluated the latency jitter of P300 evoked potentials in three BCI interfaces exploiting either overt or covert attention modalities in 20 healthy subjects. The effect of attention modality on the P300 jitter, and the relative contribution of VEPs and P300 jitter to the classification accuracy have been analyzed. Main results. The P300 jitter is higher when the BCI is controlled in covert attention. Classification accuracy negatively correlates with jitter. Even disregarding short-latency VEPs, overt-attention BCI yields better accuracy than covert. When the latency jitter is compensated offline, the difference between accuracies is not significant. Significance. The lower temporal stability of the P300 evoked potential generated during the tasks performed in covert attention modality should be regarded as the main contributing explanation of lower accuracy of covert-attention ERP-based BCIs.

Safeguards summary event list (SSEL), January 1, 1990--December 31, 1995

International Nuclear Information System (INIS)

1996-07-01

The Safeguards Summary Event List (SSEL), Vol. 2, Rev. 4, provides brief summaries of several hundred safeguards-related events involving nuclear material or facilities regulated by the U.S. Nuclear Regulatory Commission (NRC) which occurred and were reported from January 1, 1990, rough December 31, 1995. Because of public interest, the Miscellaneous category includes a few events which involve either source material, byproduct material, or natural uranium which are exempt from safeguards requirements. Events are described under the categories of Bomb-related, Intrusion, Missing and/or Allegedly Stolen, Transportation-related, Tampering/Vandalism, Arson, Firearms, Radiological Sabotage, Nonradiological Sabotage, and Miscellaneous. The information contained in the event descriptions is derived primarily from official NRC reporting channels

Safeguards summary event list (SSEL), January 1, 1990--December 31, 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-07-01

The Safeguards Summary Event List (SSEL), Vol. 2, Rev. 4, provides brief summaries of several hundred safeguards-related events involving nuclear material or facilities regulated by the U.S. Nuclear Regulatory Commission (NRC) which occurred and were reported from January 1, 1990, rough December 31, 1995. Because of public interest, the Miscellaneous category includes a few events which involve either source material, byproduct material, or natural uranium which are exempt from safeguards requirements. Events are described under the categories of Bomb-related, Intrusion, Missing and/or Allegedly Stolen, Transportation-related, Tampering/Vandalism, Arson, Firearms, Radiological Sabotage, Nonradiological Sabotage, and Miscellaneous. The information contained in the event descriptions is derived primarily from official NRC reporting channels.

Liquid crystal interfaces: Experiments, simulations and biosensors

Science.gov (United States)

Popov, Piotr

Interfacial phenomena are ubiquitous and extremely important in various aspects of biological and industrial processes. For example, many liquid crystal applications start by alignment with a surface. The underlying mechanisms of the molecular organization of liquid crystals at an interface are still under intensive study and continue to be important to the display industry in order to develop better and/or new display technology. My dissertation research has been devoted to studying how complex liquid crystals can be guided to organize at an interface, and to using my findings to develop practical applications. Specifically, I have been working on developing biosensors using liquid-crystal/surfactant/lipid/protein interactions as well as the alignment of low-symmetry liquid crystals for potential new display and optomechanical applications. The biotechnology industry needs better ways of sensing biomaterials and identifying various nanoscale events at biological interfaces and in aqueous solutions. Sensors in which the recognition material is a liquid crystal naturally connects the existing knowledge and experience of the display and biotechnology industries together with surface and soft matter sciences. This dissertation thus mainly focuses on the delicate phenomena that happen at liquid interfaces. In the introduction, I start by defining the interface and discuss its structure and the relevant interfacial forces. I then introduce the general characteristics of biosensors and, in particular, describe the design of biosensors that employ liquid crystal/aqueous solution interfaces. I further describe the basic properties of liquid crystal materials that are relevant for liquid crystal-based biosensing applications. In CHAPTER 2, I describe the simulation methods and experimental techniques used in this dissertation. In CHAPTER 3 and CHAPTER 4, I present my computer simulation work. CHAPTER 3 presents insight of how liquid crystal molecules are aligned by

Botryllus schlosseri (Tunicata) whole colony irradiation: Do senescent zooid resorption and immunological resorption involve similar recognition events

International Nuclear Information System (INIS)

Rinkevich, B.; Weissman, I.L.

1990-01-01

The colonial tunicate Botryllus schlosseri undergoes cyclic blastogenesis where feeding zooids are senescened and resorbed and a new generation of zooids takes over the colony. When non-identical colonies come into direct contact, they either reject each other or fuse. Fusion is usually followed by the resorption of one of the partners in the chimera (immunological resorption). The striking morphological similarities between the two resorption phenomena suggest that both may involve tissue destruction following self-nonself recognition events. Here we attempt to modify these two events by whole colony gamma irradiation assays. Three sets of experiments were performed: (1) different doses of whole colony irradiation for determination of irradiation effects (110 colonies); (2) pairs of irradiated-nonirradiated isografts of clonal replicates for the potential of reconstruction of the irradiated partners (23 pairs); (3) chimeras of irradiated-nonirradiated partners for analysis of resorption hierarchy. Mortality increased with the irradiation dose. All colonies exposed to more than 5,000 rads died within 19 days, while no colony died below 2,000 rads. The average mortality periods, in days, for doses of 6,000-8,000, 5,000, and 2,500-4,000 rads were 14.4 +/- 3.1 (n = 24), 19.8 +/- 6.0 (n = 15), and 19.6 + 5.1 (n = 22), respectively. Younger colonies (3-6 months old) may survive radiation better than older ones (more than 13 months). Many morphological alterations were recorded in irradiated colonies: ampullar contraction and/or dilation, accumulation of pigment cells within ampullae, abnormal bleeding from blood vessels, sluggish blood circulation, necrotic zones, reduction in bud number, and irregularities in zooid and system structures. With doses of 3,000-4,000 rads and above, irradiation arrested the formation of new buds and interrupted normal takeover

A Basic Study on P300 Event-Related Potentials Evoked by Simultaneous Presentation of Visual and Auditory Stimuli for the Communication Interface

Directory of Open Access Journals (Sweden)

Masami Hashimoto

2011-10-01

Full Text Available We have been engaged in the development of a brain-computer interface (BCI based on the cognitive P300 event-related potentials (ERPs evoked by simultaneous presentation of visual and auditory stimuli in order to assist with the communication in severe physical limitation persons. The purpose of the simultaneous presentation of these stimuli is to give the user more choices as commands. First, we extracted P300 ERPs by either visual oddball paradigm or auditory oddball paradigm. Then amplitude and latency of the P300 ERPs were measured. Second, visual and auditory stimuli were presented simultaneously, we measured the P300 ERPs varying the condition of combinations of these stimuli. In this report, we used 3 colors as visual stimuli and 3 types of MIDI sounds as auditory stimuli. Two types of simultaneous presentations were examined. The one was conducted with random combination. The other was called group stimulation, combining one color, such as red, and one MIDI sound, such as piano, in order to make a group; three groups were made. Each group was presented to users randomly. We evaluated the possibility of BCI using these stimuli from the amplitudes and the latencies of P300 ERPs.

ESR hollows molten metal/slag interface detection

International Nuclear Information System (INIS)

Harris, B.; Klein, H.J.

1983-01-01

A system for detecting the location of a molten metal/slag interface during the casting of electroslag remelted hollows includes a gamma ray radiation source and a scintillation counter. The source and counter reside outside the casting mould and are held in fixed spatial relationships with respect to one another and with respect to the mandrel. The radiation from the source is directed chordally through the mould and through the annular casting zone, defined between the sidewalls of the upwardly driven mandrel and the mould without contacting said mandrel. The counter provides an electrical signal responsive to the rate of radiation events detected thereby. (author)

Microprocessor interfacing

CERN Document Server

Vears, R E

2014-01-01

Microprocessor Interfacing provides the coverage of the Business and Technician Education Council level NIII unit in Microprocessor Interfacing (syllabus U86/335). Composed of seven chapters, the book explains the foundation in microprocessor interfacing techniques in hardware and software that can be used for problem identification and solving. The book focuses on the 6502, Z80, and 6800/02 microprocessor families. The technique starts with signal conditioning, filtering, and cleaning before the signal can be processed. The signal conversion, from analog to digital or vice versa, is expl

A review for identification of initiating events in event tree development process on nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Riyadi, Eko H., E-mail: e.riyadi@bapeten.go.id [Center for Regulatory Assessment of Nuclear Installation and Materials, Nuclear Energy Regulatory Agency (BAPETEN), Jl. Gajah Mada 8 Jakarta 10120 (Indonesia)

2014-09-30

Initiating event is defined as any event either internal or external to the nuclear power plants (NPPs) that perturbs the steady state operation of the plant, if operating, thereby initiating an abnormal event such as transient or loss of coolant accident (LOCA) within the NPPs. These initiating events trigger sequences of events that challenge plant control and safety systems whose failure could potentially lead to core damage or large early release. Selection for initiating events consists of two steps i.e. first step, definition of possible events, such as by evaluating a comprehensive engineering, and by constructing a top level logic model. Then the second step, grouping of identified initiating event's by the safety function to be performed or combinations of systems responses. Therefore, the purpose of this paper is to discuss initiating events identification in event tree development process and to reviews other probabilistic safety assessments (PSA). The identification of initiating events also involves the past operating experience, review of other PSA, failure mode and effect analysis (FMEA), feedback from system modeling, and master logic diagram (special type of fault tree). By using the method of study for the condition of the traditional US PSA categorization in detail, could be obtained the important initiating events that are categorized into LOCA, transients and external events.

Interface Realisms

DEFF Research Database (Denmark)

Pold, Søren

2005-01-01

This article argues for seeing the interface as an important representational and aesthetic form with implications for postmodern culture and digital aesthetics. The interface emphasizes realism due in part to the desire for transparency in Human-Computer Interaction (HCI) and partly...

Avatars and virtual agents - relationship interfaces for the elderly.

Science.gov (United States)

Shaked, Nava A

2017-06-01

In the Digital Era, the authors witness a change in the relationship between the patient and the care-giver or Health Maintenance Organization's providing the health services. Another fact is the use of various technologies to increase the effectiveness and quality of health services across all primary and secondary users. These technologies range from telemedicine systems, decision making tools, online and self-services applications and virtual agents; all providing information and assistance. The common thread between all these digital implementations, is they all require human machine interfaces. These interfaces must be interactive, user friendly and inviting, to create user involvement and cooperation incentives. The challenge is to design interfaces which will best fit the target users and enable smooth interaction especially, for the elderly users. Avatars and Virtual Agents are one of the interfaces used for both home care monitoring and companionship. They are also inherently multimodal in nature and allow an intimate relation between the elderly users and the Avatar. This study discusses the need and nature of these relationship models, the challenges of designing for the elderly. The study proposes key features for the design and evaluation in the area of assistive applications using Avatar and Virtual agents for the elderly users.

Buffer of Events as a Markovian Process

International Nuclear Information System (INIS)

Berdugo, J.; Casaus, J.; Mana, C.

2001-01-01

In Particle and Asro-Particle Physics experiments, the events which get trough the detectors are read and processes on-line before they are stored for a more detailed processing and future Physics analysis. Since the events are read and, usually, processed sequentially, the time involved in these operations can lead to a significant lose of events which is, to some extent, reduced by using buffers. We present an estimate of the optimum buffer size and the fraction of events lost for a simple experimental condition which serves as an introductory example to the use of Markow Chains.(Author)

Buffer of Events as a Markovian Process

Energy Technology Data Exchange (ETDEWEB)

Berdugo, J.; Casaus, J.; Mana, C.

2001-07-01

In Particle and Asro-Particle Physics experiments, the events which get trough the detectors are read and processes on-line before they are stored for a more detailed processing and future Physics analysis. Since the events are read and, usually, processed sequentially, the time involved in these operations can lead to a significant lose of events which is, to some extent, reduced by using buffers. We present an estimate of the optimum buffer size and the fraction of events lost for a simple experimental condition which serves as an introductory example to the use of Markow Chains.(Author)

The ATLAS EventIndex: architecture, design choices, deployment and first operation experience

CERN Document Server

Barberis, Dario; The ATLAS collaboration; Cranshaw, Jack; Favareto, Andrea; Fernandez Casani, Alvaro; Gallas, Elizabeth; Glasman, Claudia; Gonzalez de la Hoz, Santiago; Hrivnac, Julius; Malon, David; Prokoshin, Fedor; Salt, José; Sánchez, Javier; Toebbicke, Rainer; Yuan, Ruijun

2015-01-01

The EventIndex is the complete catalogue of all ATLAS events, keeping the references to all files that contain a given event in any processing stage. It replaces the TAG database, which had been in use during LHC Run 1. For each event it contains its identifiers, the trigger pattern and the GUIDs of the files containing it. Major use cases are event picking, feeding the Event Service used on some production sites, and technical checks of the completion and consistency of processing campaigns. The system design is highly modular so that its components (data collection system, storage system based on Hadoop, query web service and interfaces to other ATLAS systems) could be developed separately and in parallel during LS1. The EventIndex is in operation for the start of LHC Run 2. This paper describes the high-level system architecture, the technical design choices and the deployment process and issues. The performance of the data collection and storage systems, as well as the query services, are also reported.

The ATLAS EventIndex: architecture, design choices, deployment and first operation experience

CERN Document Server

Barberis, Dario; The ATLAS collaboration; Cranshaw, Jack; Favareto, Andrea; Fernandez Casani, Alvaro; Gallas, Elizabeth; Glasman, Claudia; Gonzalez de la Hoz, Santiago; Hrivnac, Julius; Malon, David; Prokoshin, Fedor; Salt, José; Sánchez, Javier; Rainer Toebbicke; Yuan, Ruijun

2015-01-01

The EventIndex is the complete catalogue of all ATLAS events, keeping the references to all files that contain a given event in any processing stage. It replaces the TAG database, which had been in use during LHC Run 1. For each event it contains its identifiers, the trigger pattern and the GUIDs of the files containing it. Major use cases are event picking, feeding the Event Service used on some production sites, and technical checks of the completion and consistency of processing campaigns. The system design is highly modular so that its components (data collection system, storage system based on Hadoop, query web service and interfaces to other ATLAS systems) could be developed separately and in parallel during LS1. The EventIndex is in operation for the start of LHC Run 2. This talk describes the high level system architecture, the technical design choices and the deployment process and issues. The performance of the data collection and storage systems, as well as the query services, will be reported.

The ATLAS EventIndex: architecture, design choices, deployment and first operation experience

Science.gov (United States)

Barberis, D.; Cárdenas Zárate, S. E.; Cranshaw, J.; Favareto, A.; Fernández Casaní, Á.; Gallas, E. J.; Glasman, C.; González de la Hoz, S.; Hřivnáč, J.; Malon, D.; Prokoshin, F.; Salt Cairols, J.; Sánchez, J.; Többicke, R.; Yuan, R.

2015-12-01

The EventIndex is the complete catalogue of all ATLAS events, keeping the references to all files that contain a given event in any processing stage. It replaces the TAG database, which had been in use during LHC Run 1. For each event it contains its identifiers, the trigger pattern and the GUIDs of the files containing it. Major use cases are event picking, feeding the Event Service used on some production sites, and technical checks of the completion and consistency of processing campaigns. The system design is highly modular so that its components (data collection system, storage system based on Hadoop, query web service and interfaces to other ATLAS systems) could be developed separately and in parallel during LSI. The EventIndex is in operation for the start of LHC Run 2. This paper describes the high-level system architecture, the technical design choices and the deployment process and issues. The performance of the data collection and storage systems, as well as the query services, are also reported.

Relationships at the aboveground-belowground interface: plants, soil biota and soil processes

NARCIS (Netherlands)

Porazinska, D.L.; Bardgett, R.D.; Postma-Blaauw, M.B.; Hunt, H.W.; Parsons, A.N.; Seastedt, T.R.; Wall, D.M.

2003-01-01

Interactions at the aboveground-below ground interface provide important feedbacks that regulate ecosystem processes. Organisms within soil food webs are involved in processes of decomposition and nutrient mineralization, and their abundance and activity have been linked to plant ecophysiological

Easy-to-use interface

International Nuclear Information System (INIS)

Blattner, D O; Blattner, M M; Tong, Y.

1999-01-01

Easy-to-use interfaces are a class of interfaces that fall between public access interfaces and graphical user interfaces in usability and cognitive difficulty. We describe characteristics of easy-to-use interfaces by the properties of four dimensions: selection, navigation, direct manipulation, and contextual metaphors. Another constraint we introduced was to include as little text as possible, and what text we have will be in at least four languages. Formative evaluations were conducted to identify and isolate these characteristics. Our application is a visual interface for a home automation system intended for a diverse set of users. The design will be expanded to accommodate the visually disabled in the near future

A high speed, selective multi-ADC to computer data transfer interface, for nuclear physics experiments

International Nuclear Information System (INIS)

Arctaedius, T.; Ekstroem, R.E.

1986-08-01

A link connecting up to fifteen Analog to Digital Converters with a computer, through a Direct Memory Access interface, is described. The interface decides which of the connected ADC:s that participate in an event, and transfers the output-data from these to the computer, accompanied with a 2-byte word identifying the participating ADC:s. This data format can be recorded on tape without further transformations, and is easy to unfold at the off-line analysis. Data transfer is accomplished in less than a few microseconds, which is made possible by the use of high speed TTL circuits. (authors)

Detection of User Independent Single Trial ERPs in Brain Computer Interfaces: An Adaptive Spatial Filtering Approach

DEFF Research Database (Denmark)

Leza, Cristina; Puthusserypady, Sadasivan

2017-01-01

Brain Computer Interfaces (BCIs) use brain signals to communicate with the external world. The main challenges to address are speed, accuracy and adaptability. Here, a novel algorithm for P300 based BCI spelling system is presented, specifically suited for single-trial detection of Event...

Application of declarative modeling approaches for external events

International Nuclear Information System (INIS)

Anoba, R.C.

2005-01-01

Probabilistic Safety Assessments (PSAs) are increasingly being used as a tool for supporting the acceptability of design, procurement, construction, operation, and maintenance activities at Nuclear Power Plants. Since the issuance of Generic Letter 88-20 and subsequent IPE/IPEEE assessments, the NRC has issued several Regulatory Guides such as RG 1.174 to describe the use of PSA in risk-informed regulation activities. Most PSA have the capability to address internal events including internal floods. As the more demands are being placed for using the PSA to support risk-informed applications, there has been a growing need to integrate other eternal events (Seismic, Fire, etc.) into the logic models. Most external events involve spatial dependencies and usually impact the logic models at the component level. Therefore, manual insertion of external events impacts into a complex integrated fault tree model may be too cumbersome for routine uses of the PSA. Within the past year, a declarative modeling approach has been developed to automate the injection of external events into the PSA. The intent of this paper is to introduce the concept of declarative modeling in the context of external event applications. A declarative modeling approach involves the definition of rules for injection of external event impacts into the fault tree logic. A software tool such as the EPRI's XInit program can be used to interpret the pre-defined rules and automatically inject external event elements into the PSA. The injection process can easily be repeated, as required, to address plant changes, sensitivity issues, changes in boundary conditions, etc. External event elements may include fire initiating events, seismic initiating events, seismic fragilities, fire-induced hot short events, special human failure events, etc. This approach has been applied at a number of US nuclear power plants including a nuclear power plant in Romania. (authors)

A Simulation Study of the Virtual Interface Architecture

International Nuclear Information System (INIS)

Hu, Tan Chang; Stans, Leonard; Tarman, Thomas D.

1999-01-01

The Virtual Interface Architecture (VIA) is an emerging standard for interconnecting commodity computing nodes into a cluster. Since VIA protocol. operations are implemented outside the operating system kernel (often, entirely in hardware), VIA transfers can be performed at very low delay, high throughput, and minimal CPU overhead. This makes VIA ideal when building large clusters that perform complex simulations of physical events, However, the scaling properties of VIA are less clear. This paper describes the design and results of a simulation model developed in OPNET to investigate VIA's ability to scale to clusters of> 1000 nodes

Study of colour connections via two-jet like events in e+e- annihilation

International Nuclear Information System (INIS)

Shao Fenglan; Xie Qubing; Li Shiyuan

2002-01-01

The authors study the different properties of the two-jet like events in e + e - →Z 0 →hadrons under different color connections with the aid of the event generator JETSET. The authors find that the two kinds of colour connections at the interface of perturbative and nonperturbative QCD, i.e., colour neutral flow and colour separate singlet, lead to significant differences for some observables in the final states. Therefore, the measurements of these observables can be used to distinguish these two kinds of colour connections

A comparison of recording modalities of P300 event-related potentials (ERP) for brain-computer interface (BCI) paradigm.

Science.gov (United States)

Mayaud, L; Congedo, M; Van Laghenhove, A; Orlikowski, D; Figère, M; Azabou, E; Cheliout-Heraut, F

2013-10-01

A brain-computer interface aims at restoring communication and control in severely disabled people by identification and classification of EEG features such as event-related potentials (ERPs). The aim of this study is to compare different modalities of EEG recording for extraction of ERPs. The first comparison evaluates the performance of six disc electrodes with that of the EMOTIV headset, while the second evaluates three different electrode types (disc, needle, and large squared electrode). Ten healthy volunteers gave informed consent and were randomized to try the traditional EEG system (six disc electrodes with gel and skin preparation) or the EMOTIV Headset first. Together with the six disc electrodes, a needle and a square electrode of larger surface were simultaneously recording near lead Cz. Each modality was evaluated over three sessions of auditory P300 separated by one hour. No statically significant effect was found for the electrode type, nor was the interaction between electrode type and session number. There was no statistically significant difference of performance between the EMOTIV and the six traditional EEG disc electrodes, although there was a trend showing worse performance of the EMOTIV headset. However, the modality-session interaction was highly significant (P<0.001) showing that, while the performance of the six disc electrodes stay constant over sessions, the performance of the EMOTIV headset drops dramatically between 2 and 3h of use. Finally, the evaluation of comfort by participants revealed an increasing discomfort with the EMOTIV headset starting with the second hour of use. Our study does not recommend the use of one modality over another based on performance but suggests the choice should be made on more practical considerations such as the expected length of use, the availability of skilled labor for system setup and above all, the patient comfort. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

Bed occupancy monitoring: data processing and clinician user interface design.

Science.gov (United States)

Pouliot, Melanie; Joshi, Vilas; Goubran, Rafik; Knoefel, Frank

2012-01-01

Unobtrusive and continuous monitoring of patients, especially at their place of residence, is becoming a significant part of the healthcare model. A variety of sensors are being used to monitor different patient conditions. Bed occupancy monitoring provides clinicians a quantitative measure of bed entry/exit patterns and may provide information relating to sleep quality. This paper presents a bed occupancy monitoring system using a bed pressure mat sensor. A clinical trial was performed involving 8 patients to collect bed occupancy data. The trial period for each patient ranged from 5-10 weeks. This data was analyzed using a participatory design methodology incorporating clinician feedback to obtain bed occupancy parameters. The parameters extracted include the number of bed exits per night, the bed exit weekly average (including minimum and maximum), the time of day of a particular exit, and the amount of uninterrupted bed occupancy per night. The design of a clinical user interface plays a significant role in the acceptance of such patient monitoring systems by clinicians. The clinician user interface proposed in this paper was designed to be intuitive, easy to navigate and not cause information overload. An iterative design methodology was used for the interface design. The interface design is extendible to incorporate data from multiple sensors. This allows the interface to be part of a comprehensive remote patient monitoring system.

Pseudomonas aeruginosa invasion and cytotoxicity are independent events, both of which involve protein tyrosine kinase activity.

Science.gov (United States)

Evans, D J; Frank, D W; Finck-Barbançon, V; Wu, C; Fleiszig, S M

1998-04-01

Pseudomonas aeruginosa clinical isolates exhibit invasive or cytotoxic phenotypes. Cytotoxic strains acquire some of the characteristics of invasive strains when a regulatory gene, exsA, that controls the expression of several extracellular proteins, is inactivated. exsA mutants are not cytotoxic and can be detected within epithelial cells by gentamicin survival assays. The purpose of this study was to determine whether epithelial cell invasion precedes and/or is essential for cytotoxicity. This was tested by measuring invasion (gentamicin survival) and cytotoxicity (trypan blue staining) of PA103 mutants deficient in specific exsA-regulated proteins and by testing the effect of drugs that inhibit invasion for their effect on cytotoxicity. A transposon mutant in the exsA-regulated extracellular factor exoU was neither cytotoxic nor invasive. Furthermore, several of the drugs that inhibited invasion did not prevent cytotoxicity. These results show that invasion and cytotoxicity are mutually exclusive events, inversely regulated by an exsA-encoded invasion inhibitor(s). Both involve host cell protein tyrosine kinase (PTK) activity, but they differ in that invasion requires Src family tyrosine kinases and calcium-calmodulin activity. PTK inhibitor drugs such as genistein may have therapeutic potential through their ability to block both invasive and cytotoxicity pathways via an action on the host cell.

Organic interfaces

NARCIS (Netherlands)

Poelman, W.A.; Tempelman, E.

2014-01-01

This paper deals with the consequences for product designers resulting from the replacement of traditional interfaces by responsive materials. Part 1 presents a theoretical framework regarding a new paradigm for man-machine interfacing. Part 2 provides an analysis of the opportunities offered by new

Complex Interfaces Under Change

DEFF Research Database (Denmark)

Rosbjerg, Dan

The hydrosphere is dynamic across the major compartments of the Earth system: the atmosphere, the oceans and seas, the land surface water, and the groundwater within the strata below the two last compartments. The global geography of the hydrosphere essentially depends on thermodynamic and mechan...... these interfaces and interfaced compartments and processes. Climate, sea-level, oceanographic currents and hydrological processes are all affected, while anthropogenic changes are often intense in the geographic settings corresponding to such interfaces....... and mechanical processes that develop within this structure. Water-related processes at the interfaces between the compartments are complex, depending both on the interface itself, and on the characteristics of the interfaced compartments. Various aspects of global change directly or indirectly impact...

Control of a nursing bed based on a hybrid brain-computer interface.

Science.gov (United States)

Nengneng Peng; Rui Zhang; Haihua Zeng; Fei Wang; Kai Li; Yuanqing Li; Xiaobin Zhuang

2016-08-01

In this paper, we propose an intelligent nursing bed system which is controlled by a hybrid brain-computer interface (BCI) involving steady-state visual evoked potential (SSVEP) and P300. Specifically, the hybrid BCI includes an asynchronous brain switch based on SSVEP and P300, and a P300-based BCI. The brain switch is used to turn on/off the control system of the electric nursing bed through idle/control state detection, whereas the P300-based BCI is for operating the nursing bed. At the beginning, the user may focus on one group of flashing buttons in the graphic user interface (GUI) of the brain switch, which can simultaneously evoke SSVEP and P300, to switch on the control system. Here, the combination of SSVEP and P300 is used for improving the performance of the brain switch. Next, the user can control the nursing bed using the P300-based BCI. The GUI of the P300-based BCI includes 10 flashing buttons, which correspond to 10 functional operations, namely, left-side up, left-side down, back up, back down, bedpan open, bedpan close, legs up, legs down, right-side up, and right-side down. For instance, he/she can focus on the flashing button "back up" in the GUI of the P300-based BCI to activate the corresponding control such that the nursing bed is adjusted up. Eight healthy subjects participated in our experiment, and obtained an average accuracy of 93.75% and an average false positive rate (FPR) of 0.15 event/min. The effectiveness of our system was thus demonstrated.

Quantization of interface currents

Energy Technology Data Exchange (ETDEWEB)

Kotani, Motoko [AIMR, Tohoku University, Sendai (Japan); Schulz-Baldes, Hermann [Department Mathematik, Universität Erlangen-Nürnberg, Erlangen (Germany); Villegas-Blas, Carlos [Instituto de Matematicas, Cuernavaca, UNAM, Cuernavaca (Mexico)

2014-12-15

At the interface of two two-dimensional quantum systems, there may exist interface currents similar to edge currents in quantum Hall systems. It is proved that these interface currents are macroscopically quantized by an integer that is given by the difference of the Chern numbers of the two systems. It is also argued that at the interface between two time-reversal invariant systems with half-integer spin, one of which is trivial and the other non-trivial, there are dissipationless spin-polarized interface currents.

The wave-based substructuring approach for the efficient description of interface dynamics in substructuring

Science.gov (United States)

Donders, S.; Pluymers, B.; Ragnarsson, P.; Hadjit, R.; Desmet, W.

2010-04-01

In the vehicle design process, design decisions are more and more based on virtual prototypes. Due to competitive and regulatory pressure, vehicle manufacturers are forced to improve product quality, to reduce time-to-market and to launch an increasing number of design variants on the global market. To speed up the design iteration process, substructuring and component mode synthesis (CMS) methods are commonly used, involving the analysis of substructure models and the synthesis of the substructure analysis results. Substructuring and CMS enable efficient decentralized collaboration across departments and allow to benefit from the availability of parallel computing environments. However, traditional CMS methods become prohibitively inefficient when substructures are coupled along large interfaces, i.e. with a large number of degrees of freedom (DOFs) at the interface between substructures. The reason is that the analysis of substructures involves the calculation of a number of enrichment vectors, one for each interface degree of freedom (DOF). Since large interfaces are common in vehicles (e.g. the continuous line connections to connect the body with the windshield, roof or floor), this interface bottleneck poses a clear limitation in the vehicle noise, vibration and harshness (NVH) design process. Therefore there is a need to describe the interface dynamics more efficiently. This paper presents a wave-based substructuring (WBS) approach, which allows reducing the interface representation between substructures in an assembly by expressing the interface DOFs in terms of a limited set of basis functions ("waves"). As the number of basis functions can be much lower than the number of interface DOFs, this greatly facilitates the substructure analysis procedure and results in faster design predictions. The waves are calculated once from a full nominal assembly analysis, but these nominal waves can be re-used for the assembly of modified components. The WBS approach thus

University Response to Crisis Events Involving International Populations: The Case of Seven Directors of International Offices

Science.gov (United States)

Andrews, James P.

2012-01-01

This qualitative research study focuses on crisis events affecting university international populations. It explores how seven directors of university international offices at seven different geographical locations in Texas respond to those events. The study findings shed light on the current state of crisis preparedness in higher education from…

UNIBUS processor interface for a FASTBUS data acquisition system

International Nuclear Information System (INIS)

Larwill, M.; Lagerlund, T.D.; Barsotti, E.; Taff, L.M.; Franzen, J.

1981-01-01

Current work on a FASTBUS data acquisition system at Fermilab is described. The system will consist of three pieces of FASTBUS hardware: a UNIBUS processor interface (UPI), a dual-ported bulk memory, and a FASTBUS ''event builder'' (i.e., data acquisition processor). Primary efforts have been on specifying and constructing a UPI. The present specification includes capability for all basic FASTBUS operations, including list processing of consecutive FASTBUS operations. Some possible FASTBUS data acquisition system architectures employing the UPI are discussed along with some detailed specifications of the UPI itself

Social Circles: A 3D User Interface for Facebook

Science.gov (United States)

Rodrigues, Diego; Oakley, Ian

Online social network services are increasingly popular web applications which display large amounts of rich multimedia content: contacts, status updates, photos and event information. Arguing that this quantity of information overwhelms conventional user interfaces, this paper presents Social Circles, a rich interactive visualization designed to support real world users of social network services in everyday tasks such as keeping up with friends and organizing their network. It achieves this by using 3D UIs, fluid animations and a spatial metaphor to enable direct manipulation of a social network.

Configurations of NPD : production interfaces and interface integration mechanisms

NARCIS (Netherlands)

Smulders, F.E.H.M.; Boer, H.; Hansen, P.H.K.; Gubi, E.; Dorst, C.H.

2002-01-01

This paper describes and illustrates different configurations of the interface between new product development and production processes, including both intra–firm and inter–firm interfaces. These configurations are partly based on a process view of product innovation and partly on a structural view

Investigation of human-robot interface performance in household environments

Science.gov (United States)

Cremer, Sven; Mirza, Fahad; Tuladhar, Yathartha; Alonzo, Rommel; Hingeley, Anthony; Popa, Dan O.

2016-05-01

Today, assistive robots are being introduced into human environments at an increasing rate. Human environments are highly cluttered and dynamic, making it difficult to foresee all necessary capabilities and pre-program all desirable future skills of the robot. One approach to increase robot performance is semi-autonomous operation, allowing users to intervene and guide the robot through difficult tasks. To this end, robots need intuitive Human-Machine Interfaces (HMIs) that support fine motion control without overwhelming the operator. In this study we evaluate the performance of several interfaces that balance autonomy and teleoperation of a mobile manipulator for accomplishing several household tasks. Our proposed HMI framework includes teleoperation devices such as a tablet, as well as physical interfaces in the form of piezoresistive pressure sensor arrays. Mobile manipulation experiments were performed with a sensorized KUKA youBot, an omnidirectional platform with a 5 degrees of freedom (DOF) arm. The pick and place tasks involved navigation and manipulation of objects in household environments. Performance metrics included time for task completion and position accuracy.

Ab initio study on the dynamics of furfural at the liquid-solid interfaces

Science.gov (United States)

Dang, Hongli; Xue, Wenhua; Shields, Darwin; Liu, Yingdi; Jentoft, Friederike; Resasco, Daniel; Wang, Sanwu

2013-03-01

Catalytic biomass conversion sometimes occurs at the liquid-solid interfaces. We report ab initio molecular dynamics simulations at finite temperatures for the catalytic reactions involving furfural at the water-Pd and water-Cu interfaces. We found that, during the dynamic process, the furan ring of furfural prefers to be parallel to the Pd surface and the aldehyde group tends to be away from the Pd surface. On the other hand, at the water-Cu(111) interface, furfural prefers to be tilted to the Cu surface while the aldehyde group is bonded to the surface. In both cases, interaction of liquid water and furfural is identified. The difference of dynamic process of furfural at the two interfaces suggests different catalytic reaction mechanisms for the conversion of furfural, consistent with the experimental investigations. Supported by DOE (DE-SC0004600). Simulations and calculations were performed on XSED's and NERSC's supercomputers

The Chandra Source Catalog 2.0: Interfaces

Science.gov (United States)

D'Abrusco, Raffaele; Zografou, Panagoula; Tibbetts, Michael; Allen, Christopher E.; Anderson, Craig S.; Budynkiewicz, Jamie A.; Burke, Douglas; Chen, Judy C.; Civano, Francesca Maria; Doe, Stephen M.; Evans, Ian N.; Evans, Janet D.; Fabbiano, Giuseppina; Gibbs, Danny G., II; Glotfelty, Kenny J.; Graessle, Dale E.; Grier, John D.; Hain, Roger; Hall, Diane M.; Harbo, Peter N.; Houck, John C.; Lauer, Jennifer L.; Laurino, Omar; Lee, Nicholas P.; Martínez-Galarza, Rafael; McCollough, Michael L.; McDowell, Jonathan C.; Miller, Joseph; McLaughlin, Warren; Morgan, Douglas L.; Mossman, Amy E.; Nguyen, Dan T.; Nichols, Joy S.; Nowak, Michael A.; Paxson, Charles; Plummer, David A.; Primini, Francis Anthony; Rots, Arnold H.; Siemiginowska, Aneta; Sundheim, Beth A.; Van Stone, David W.

2018-01-01

Easy-to-use, powerful public interfaces to access the wealth of information contained in any modern, complex astronomical catalog are fundamental to encourage its usage. In this poster,I present the public interfaces of the second Chandra Source Catalog (CSC2). CSC2 is the most comprehensive catalog of X-ray sources detected by Chandra, thanks to the inclusion of Chandra observations public through the end of 2014 and to methodological advancements. CSC2 provides measured properties for a large number of sources that sample the X-ray sky at fainter levels than the previous versions of the CSC, thanks to the stacking of single overlapping observations within 1’ before source detection. Sources from stacks are then crossmatched, if multiple stacks cover the same area of the sky, to create a list of unique, optimal CSC2 sources. The properties of sources detected in each single stack and each single observation are also measured. The layered structure of the CSC2 catalog is mirrored in the organization of the CSC2 database, consisting of three tables containing all properties for the unique stacked sources (“Master Source”), single stack sources (“Stack Source”) and sources in any single observation (“Observation Source”). These tables contain estimates of the position, flags, extent, significances, fluxes, spectral properties and variability (and associated errors) for all classes of sources. The CSC2 also includes source region and full-field data products for all master sources, stack sources and observation sources: images, photon event lists, light curves and spectra.CSCview, the main interface to the CSC2 source properties and data products, is a GUI tool that allows to build queries based on the values of all properties contained in CSC2 tables, query the catalog, inspect the returned table of source properties, browse and download the associated data products. I will also introduce the suite of command-line interfaces to CSC2 that can be used in

An Approach to Interface Synthesis

DEFF Research Database (Denmark)

Madsen, Jan; Hald, Bjarne

1995-01-01

Presents a novel interface synthesis approach based on a one-sided interface description. Whereas most other approaches consider interface synthesis as optimizing a channel to existing client/server modules, we consider the interface synthesis as part of the client/server module synthesis (which...... may contain the re-use of existing modules). The interface synthesis approach describes the basic transformations needed to transform the server interface description into an interface description on the client side of the communication medium. The synthesis approach is illustrated through a point...

TA-55 facility control system upgrade project - human-system interface functional requirements

International Nuclear Information System (INIS)

Atkins, W.H.; Pope, N.G.; Turner, W.J.; Brown, R.E.

1995-11-01

The functional requirements for that part of the Technical Area (TA)-55 Operations Center Upgrade Project that involves the human-system interface (HSI) are described in this document. The upgrade project seeks to replace completely the center's existing computerized data acquisition and display system, which consists of the field multiplexer units, Data General computer systems, and associated peripherals and software. The upgrade project has two parts-the Facility Data Acquisition Interface System (FDAIS) and the HSI. The HSI comprises software and hardware to provide a high-level graphical operator interface to the data acquisition system, as well as data archiving, alarm annunciation, and logging. The new system will be built with modern, commercially available components; it will improve reliability and maintainability, and it can be expanded for future needs

A ghost fluid method for sharp interface simulations of compressible multiphase flows

International Nuclear Information System (INIS)

Majidi, Sahand; Afshari, Asghar

2016-01-01

A ghost fluid based computational tool is developed to study a wide range of compressible multiphase flows involving strong shocks and contact discontinuities while accounting for surface tension, viscous stresses and gravitational forces. The solver utilizes constrained reinitialization method to predict the interface configuration at each time step. Surface tension effect is handled via an exact interface Riemann problem solver. Interfacial viscous stresses are approximated by considering continuous velocity and viscous stress across the interface. To assess the performance of the solver several benchmark problems are considered: One-dimensional gas-water shock tube problem, shock-bubble interaction, air cavity collapse in water, underwater explosion, Rayleigh-Taylor Instability, and ellipsoidal drop oscillations. Results obtained from the numerical simulations indicate that the numerical methodology performs reasonably well in predicting flow features and exhibit a very good agreement with prior experimental and numerical observations. To further examine the accuracy of the developed ghost fluid solver, the obtained results are compared to those by a conventional diffuse interface solver. The comparison shows the capability of our ghost fluid method in reproducing the experimentally observed flow characteristics while revealing more details regarding topological changes of the interface.

A ghost fluid method for sharp interface simulations of compressible multiphase flows

Energy Technology Data Exchange (ETDEWEB)

Majidi, Sahand; Afshari, Asghar [University of Tehran, Teheran (Iran, Islamic Republic of)

2016-04-15

A ghost fluid based computational tool is developed to study a wide range of compressible multiphase flows involving strong shocks and contact discontinuities while accounting for surface tension, viscous stresses and gravitational forces. The solver utilizes constrained reinitialization method to predict the interface configuration at each time step. Surface tension effect is handled via an exact interface Riemann problem solver. Interfacial viscous stresses are approximated by considering continuous velocity and viscous stress across the interface. To assess the performance of the solver several benchmark problems are considered: One-dimensional gas-water shock tube problem, shock-bubble interaction, air cavity collapse in water, underwater explosion, Rayleigh-Taylor Instability, and ellipsoidal drop oscillations. Results obtained from the numerical simulations indicate that the numerical methodology performs reasonably well in predicting flow features and exhibit a very good agreement with prior experimental and numerical observations. To further examine the accuracy of the developed ghost fluid solver, the obtained results are compared to those by a conventional diffuse interface solver. The comparison shows the capability of our ghost fluid method in reproducing the experimentally observed flow characteristics while revealing more details regarding topological changes of the interface.

Kinases Involved in Both Autophagy and Mitosis.

Science.gov (United States)

Li, Zhiyuan; Zhang, Xin

2017-08-31

Both mitosis and autophagy are highly regulated dynamic cellular processes and involve various phosphorylation events catalysed by kinases, which play vital roles in almost all physiological and pathological conditions. Mitosis is a key event during the cell cycle, in which the cell divides into two daughter cells. Autophagy is a process in which the cell digests its own cellular contents. Although autophagy regulation has mainly been studied in asynchronous cells, increasing evidence indicates that autophagy is in fact tightly regulated in mitosis. Here in this review, we will discuss kinases that were originally identified to be involved in only one of either mitosis or autophagy, but were later found to participate in both processes, such as CDKs (cyclin-dependent kinases), Aurora kinases, PLK-1 (polo-like kinase 1), BUB1 (budding uninhibited by benzimidazoles 1), MAPKs (mitogen-activated protein kinases), mTORC1 (mechanistic target of rapamycin complex 1), AMPK (AMP-activated protein kinase), PI3K (phosphoinositide-3 kinase) and protein kinase B (AKT). By focusing on kinases involved in both autophagy and mitosis, we will get a more comprehensive understanding about the reciprocal regulation between the two key cellular events, which will also shed light on their related therapeutic investigations.

Kinases Involved in Both Autophagy and Mitosis

Directory of Open Access Journals (Sweden)

Zhiyuan Li

2017-08-01

Full Text Available Both mitosis and autophagy are highly regulated dynamic cellular processes and involve various phosphorylation events catalysed by kinases, which play vital roles in almost all physiological and pathological conditions. Mitosis is a key event during the cell cycle, in which the cell divides into two daughter cells. Autophagy is a process in which the cell digests its own cellular contents. Although autophagy regulation has mainly been studied in asynchronous cells, increasing evidence indicates that autophagy is in fact tightly regulated in mitosis. Here in this review, we will discuss kinases that were originally identified to be involved in only one of either mitosis or autophagy, but were later found to participate in both processes, such as CDKs (cyclin-dependent kinases, Aurora kinases, PLK-1 (polo-like kinase 1, BUB1 (budding uninhibited by benzimidazoles 1, MAPKs (mitogen-activated protein kinases, mTORC1 (mechanistic target of rapamycin complex 1, AMPK (AMP-activated protein kinase, PI3K (phosphoinositide-3 kinase and protein kinase B (AKT. By focusing on kinases involved in both autophagy and mitosis, we will get a more comprehensive understanding about the reciprocal regulation between the two key cellular events, which will also shed light on their related therapeutic investigations.

Touchfree medical interfaces.

Science.gov (United States)

Rossol, Nathaniel; Cheng, Irene; Rui Shen; Basu, Anup

2014-01-01

Real-time control of visual display systems via mid-air hand gestures offers many advantages over traditional interaction modalities. In medicine, for example, it allows a practitioner to adjust display values, e.g. contrast or zoom, on a medical visualization interface without the need to re-sterilize the interface. However, when users are holding a small tool (such as a pen, surgical needle, or computer stylus) the need to constantly put the tool down in order to make hand gesture interactions is not ideal. This work presents a novel interface that automatically adjusts for gesturing with hands and hand-held tools to precisely control medical displays. The novelty of our interface is that it uses a single set of gestures designed to be equally effective for fingers and hand-held tools without using markers. This type of interface was previously not feasible with low-resolution depth sensors such as Kinect, but is now achieved by using the recently released Leap Motion controller. Our interface is validated through a user study on a group of people given the task of adjusting parameters on a medical image.

Diffusion between evolving interfaces

International Nuclear Information System (INIS)

Juntunen, Janne; Merikoski, Juha

2010-01-01

Diffusion in an evolving environment is studied by continuous-time Monte Carlo simulations. Diffusion is modeled by continuous-time random walkers on a lattice, in a dynamic environment provided by bubbles between two one-dimensional interfaces driven symmetrically towards each other. For one-dimensional random walkers constrained by the interfaces, the bubble size distribution dominates diffusion. For two-dimensional random walkers, it is also controlled by the topography and dynamics of the interfaces. The results of the one-dimensional case are recovered in the limit where the interfaces are strongly driven. Even with simple hard-core repulsion between the interfaces and the particles, diffusion is found to depend strongly on the details of the dynamical rules of particles close to the interfaces.

Combinatorial Nano-Bio Interfaces.

Science.gov (United States)

Cai, Pingqiang; Zhang, Xiaoqian; Wang, Ming; Wu, Yun-Long; Chen, Xiaodong

2018-06-08

Nano-bio interfaces are emerging from the convergence of engineered nanomaterials and biological entities. Despite rapid growth, clinical translation of biomedical nanomaterials is heavily compromised by the lack of comprehensive understanding of biophysicochemical interactions at nano-bio interfaces. In the past decade, a few investigations have adopted a combinatorial approach toward decoding nano-bio interfaces. Combinatorial nano-bio interfaces comprise the design of nanocombinatorial libraries and high-throughput bioevaluation. In this Perspective, we address challenges in combinatorial nano-bio interfaces and call for multiparametric nanocombinatorics (composition, morphology, mechanics, surface chemistry), multiscale bioevaluation (biomolecules, organelles, cells, tissues/organs), and the recruitment of computational modeling and artificial intelligence. Leveraging combinatorial nano-bio interfaces will shed light on precision nanomedicine and its potential applications.

Evaluation and use of regenerative multi electrode interfaces in peripheral nerves

Science.gov (United States)

Desai, Vidhi

Peripheral nerves offer unique accessibility to the innate motor and sensory pathways that can be interfaced with high degree of selectivity for intuitive and bidirectional control of advanced upper extremity prosthetic limbs. Several peripheral nerve interfaces have been proposed and investigated over the last few decades with significant progress made in the area of sensory feedback. However, clinical translation still remains a formidable challenge due to the lack of long term recordings. Prominent causes include signal degradation, eventual interface failures, and lack of specificity in the low amplitude nerve signals. This dissertation evaluates the capabilities of the newly developed Regenerative Multi-electrode Interface (REMI) by the characterization of signal quality progression, the identification of interfaced axon types, and the demonstration of "functional linkage" between acquired signals and target organs. Chapter 2 details the chronic recording of high quality signals from REMI in sciatic nerve which remained stable over a 120 day implantation period indicative of minimal ongoing tissue response with no detrimental effects on the recording ability. The dominant cause of failures was attributable to abiotic factors pertaining to the connector/wire breakage, observed in 76% of REMI implants. Also, the REMI implants had 20% higher success rate and significantly larger Signal to Noise Ratio (SNR) in comparison to the Utah Slanted Electrode Array (USEA). Chapter 3 describes the successful feasibility of interfacing with motor and sensory axons by REMI implantation in the tibial and sural fascicles of the sciatic nerve. A characteristic sampling bias towards recording signals from medium-to-large diameter axons that are primarily involved in mechanoception and proprioception sensory functions was uncovered. Specific bursting units (Inter Spike Interval of 30-70ms) were observed most frequently from the tibial fascicle during bipedal locomotion. Chapter 4

Brain Machine Interfaces : technology status, applications and the way to the future

NARCIS (Netherlands)

Erp, J.B.F. van; Duistermaat, M.; Philippens, I.H.C.H.M.; Veen, H.A.H.C. van; Werkhoven, P.J.

2006-01-01

Brain Machine Interfaces (BMIs) enable direct communication between the brain or nervous system and a machine without involving the sensory-motor system. BMIs are an embryonic technology and remarkable accomplishments have recently been reported. BMIs have a high potential and possibly an enormous

Study and simulation of human interface; Human interface kenkyu to simulation

Energy Technology Data Exchange (ETDEWEB)

Nishitani, H. [Nara Institute of Science and Technology, Nara (Japan)

1996-10-05

Validation researches have begun about the interrelationship between systems and human beings using a virtual-reality plant environment. This article introduces some recent studies about the human interface in an operation control system in a virtual-reality environment. The evaluation of a system from the viewpoint of ease of use is called a usability test, to which a psychological protocol analysis is applied for finding out problematic points by carefully observing the operator actually operating the system. For instance, in a boiler plant simulator constructed for DCS training, the operator is given some tasks, such as the prediction as to how a certain event will develop, probing of the cause of anomalies, and execution of related operations. Video cameras are installed at various spots for the minute observation of facial expressions and behavior of the operator, and the operator`s recognition, thought, behavior, and utterances, expressed by the operator facially or verbally, are recorded and analyzed, and the results are utilized for system improvement and operator training. 3 refs., 2 figs.

FPGA implementation of PCI to CAMAC interface for Embedded CAMAC Controller (ECC)

International Nuclear Information System (INIS)

Jha, K.; Behere, Anita; Ghodgaonkar, M.D.

2005-01-01

CAMAC controllers are used for control systems and nuclear physics experiments. Control applications need more number of physically distributed crates with regular scanning of all the parameters, the control being with a centralized computer. On the other hand, nuclear physics experiments need a high throughput with a large number of parameters in one or more crates. The nature of events is random hence buffering of data in LIST mode acquisition is needed. For a large number of parameters, this translates to high transfer rate. Hence it is essential that the CAMAC readout time is minimized and also the data transfer speed is improved to achieve maximum effective throughput. The ECC is designed to achieve these objectives using an embedded controller with PC architecture having PCI bus as interface for add on logic. The PCI Add-on to CAMAC interface protocol has been implemented in an AL TERA FPGA and all the functionality coded in VHDL. This paper discusses the design aspects of the FPGA implementation of the PCI to CAMAC interface. (author)

Engineering Musculoskeletal Tissue Interfaces

Directory of Open Access Journals (Sweden)

Ece Bayrak

2018-04-01

Full Text Available Tissue engineering aims to bring together biomaterials, cells, and signaling molecules within properly designed microenvironments in order to create viable treatment options for the lost or malfunctioning tissues. Design and production of scaffolds and cell-laden grafts that mimic the complex structural and functional features of tissues are among the most important elements of tissue engineering strategy. Although all tissues have their own complex structure, an even more complex case in terms of engineering a proper carrier material is encountered at the tissue interfaces, where two distinct tissues come together. The interfaces in the body can be examined in four categories; cartilage-bone and ligament-bone interfaces at the knee and the spine, tendon-bone interfaces at the shoulder and the feet, and muscle-tendon interface at the skeletal system. These interfaces are seen mainly at the soft-to-hard tissue transitions and they are especially susceptible to injury and tear due to the biomechanical inconsistency between these tissues where high strain fields are present. Therefore, engineering the musculoskeletal tissue interfaces remain a challenge. This review focuses on recent advancements in strategies for musculoskeletal interface engineering using different biomaterial-based platforms and surface modification techniques.

Joint Models of Longitudinal and Time-to-Event Data with More Than One Event Time Outcome: A Review.

Science.gov (United States)

Hickey, Graeme L; Philipson, Pete; Jorgensen, Andrea; Kolamunnage-Dona, Ruwanthi

2018-01-31

Methodological development and clinical application of joint models of longitudinal and time-to-event outcomes have grown substantially over the past two decades. However, much of this research has concentrated on a single longitudinal outcome and a single event time outcome. In clinical and public health research, patients who are followed up over time may often experience multiple, recurrent, or a succession of clinical events. Models that utilise such multivariate event time outcomes are quite valuable in clinical decision-making. We comprehensively review the literature for implementation of joint models involving more than a single event time per subject. We consider the distributional and modelling assumptions, including the association structure, estimation approaches, software implementations, and clinical applications. Research into this area is proving highly promising, but to-date remains in its infancy.

Catastrophic events and older adults.

Science.gov (United States)

Cloyd, Elizabeth; Dyer, Carmel B

2010-12-01

The plight of older adults during catastrophic events is a societal concern. Older persons have an increased prevalence of cognitive disorders, chronic illnesses, and mobility problems that limit their ability to cope. These disorders may result in a lack of mental capacity and the ability to discern when they should evacuate or resolve problems encountered during a catastrophe. Some older persons may have limited transportation options, and many of the elderly survivors are at increased risk for abuse, neglect, and exploitation. Recommendations for future catastrophic events include the development of a federal tracking system for elders and other vulnerable adults, the designation of separate shelter areas for elders and other vulnerable adults, and involvement of gerontological professionals in all aspects of emergency preparedness and care delivery, including training of frontline workers. Preparation through preevent planning that includes region-specific social services, medical and public health resources, volunteers, and facilities for elders and vulnerable adults is critical. Elders need to be protected from abuse and fraud during catastrophic events. A public health triage system for elders and other vulnerable populations in pre- and postdisaster situations is useful, and disaster preparedness is paramount. Communities and members of safety and rescue teams must address ethical issues before an event. When older adults are involved, consideration needs to be given to triage decision making, transporting those who are immobile, the care of older adults who receive palliative care, and the equitable distribution of resources. Nurses are perfectly equipped with the skills, knowledge, and training needed to plan and implement disaster preparedness programs. In keeping with the tradition of Florence Nightingale, nurses can assume several crucial roles in disaster preparedness for older adults. Nurses possess the ability to participate and lead community

Turbulent heat/mass transfer at oceanic interfaces

Energy Technology Data Exchange (ETDEWEB)

Enstad, Lars Inge

2005-07-01

solver. We find that the mixed layer of the active scalar is growing in the start, but then levels out because of large density gradient at the boundary of the turbulent layer. At distinct times the turbulent intensity is suddenly increased for a short time. This is due to a build up of velocity gradients which increases the turbulent intensity when it overcomes the damping effect of the buoyancy forces. This thesis tries to gain insight in turbulence near a gas liquid interface or a density interface by using small scale modeling. Stratification is imposed (both stable and unstable), and we have also used different forcing (i.e. pressure gradient and shear stress). It is found that stratification can significantly alter the scalar transfer through the gas-liquid interface. The heat flux through the gas liquid interface in an unstable stratified channel flow do no longer obey the correlation of Komori et al. (1989) and Rashidi et al. (1991). For a shear driven flow with inward heat flux it is found that the stable stratification weakens and distorts the streamwise vorticity thought to be an important agent in the scalar transfer through the interface. We have also tried to obtain results for turbulence more in general. It is confirmed that eddy viscosity can become negative in a region near the interface in the presence of unstable stratification in a channel flow. This leaves gradient diffusion models less reliable in such flow configurations. We have also found some interesting aspects of the Reynolds stress in a shear driven flow with stable stratification. In this flow configuration the Reynolds stress is decreased by damping of the ejection events from the interface. The last article which deals with an idealized brine pool at the sea bottom, could have relevance for CO2 disposal in CO2 lakes in the deep ocean. It is very important to know how such disposal of CO2 would affect the environment near the sea bottom. This thesis deals with idealized types of flows. It

The public of media events

Directory of Open Access Journals (Sweden)

Christian Morgner

2010-12-01

Full Text Available This article focuses on the growing importance of large-scale events and their central role in a globalised media world in relation to public reactions and public involvement. The peculiar structure of such events requires a different understanding of mass communication and its audience. Therefore, the audience is further examined with regard to its impact on and inclusion in the media itself. Consequently, questions are raised as to how the public is incorporated, the form this inclusion takes and the effect that this has on the audience’s participation.The article examines different types of semantic inclusion, with a focus on emotional reactions towards three different media events: the Titanic disaster, the assassination of John F. Kennedy, and the death of Princess Diana.

Guidance on accidents involving radioactivity

International Nuclear Information System (INIS)

1989-01-01

This annex contains advice to Health Authorities on their response to accidents involving radioactivity. The guidance is in six parts:-(1) planning the response required to nuclear accidents overseas, (2) planning the response required to UK nuclear accidents a) emergency plans for nuclear installations b) nuclear powered satellites, (3) the handling of casualties contaminated with radioactive substances, (4) background information for dealing with queries from the public in the event of an accident, (5) the national arrangements for incident involving radioactivity (NAIR), (6) administrative arrangements. (author)

Training leads to increased auditory brain-computer interface performance of end-users with motor impairments.

Science.gov (United States)

Halder, S; Käthner, I; Kübler, A

2016-02-01

Auditory brain-computer interfaces are an assistive technology that can restore communication for motor impaired end-users. Such non-visual brain-computer interface paradigms are of particular importance for end-users that may lose or have lost gaze control. We attempted to show that motor impaired end-users can learn to control an auditory speller on the basis of event-related potentials. Five end-users with motor impairments, two of whom with additional visual impairments, participated in five sessions. We applied a newly developed auditory brain-computer interface paradigm with natural sounds and directional cues. Three of five end-users learned to select symbols using this method. Averaged over all five end-users the information transfer rate increased by more than 1800% from the first session (0.17 bits/min) to the last session (3.08 bits/min). The two best end-users achieved information transfer rates of 5.78 bits/min and accuracies of 92%. Our results show that an auditory BCI with a combination of natural sounds and directional cues, can be controlled by end-users with motor impairment. Training improves the performance of end-users to the level of healthy controls. To our knowledge, this is the first time end-users with motor impairments controlled an auditory brain-computer interface speller with such high accuracy and information transfer rates. Further, our results demonstrate that operating a BCI with event-related potentials benefits from training and specifically end-users may require more than one session to develop their full potential. Copyright © 2015 International Federation of Clinical Neurophysiology. Published by Elsevier Ireland Ltd. All rights reserved.

Universal computer interfaces

CERN Document Server

Dheere, RFBM

1988-01-01

Presents a survey of the latest developments in the field of the universal computer interface, resulting from a study of the world patent literature. Illustrating the state of the art today, the book ranges from basic interface structure, through parameters and common characteristics, to the most important industrial bus realizations. Recent technical enhancements are also included, with special emphasis devoted to the universal interface adapter circuit. Comprehensively indexed.

Interface Input/Output Automata

DEFF Research Database (Denmark)

Larsen, Kim Guldstrand; Nyman, Ulrik; Wasowski, Andrzej

2006-01-01

Building on the theory of interface automata by de Alfaro and Henzinger we design an interface language for Lynch’s I/O, a popular formalism used in the development of distributed asynchronous systems, not addressed by previous interface research. We introduce an explicit separation of assumptions...... a method for solving systems of relativized behavioral inequalities as used in our setup and draw a formal correspondence between our work and interface automata....

The effect of stricter licensing on road traffic injury events involving 15 to 17-year-old moped drivers in Sweden: A time series intervention study.

Science.gov (United States)

Bonander, Carl; Andersson, Ragnar; Nilson, Finn

2015-10-01

This study aimed to evaluate and quantify the effect of the introduction of the AM driving license on non-fatal moped-related injuries in Sweden. With the introduction of the new license category in October 2009, prospective moped drivers are now required to pass a mandatory theory test following a practical and theoretical course. In addition, obtaining a license to operate a moped is now considerably more costly. Time series intervention analysis on monthly aggregated injury data (1st Jan 2007-31st Dec 2013) was performed using generalized additive models for location, shape and scale (GAMLSS) to quantify the effect size on injury events involving teenage (15-17 years) moped drivers, while controlling for trend and seasonality. Exposure was adjusted for by using the number of registered mopeds in traffic as a proxy. The introduction of AM license was associated with a 41% reduction in the rate of injury events involving 15-year-old moped drivers (IRR 0.59 [95% CI: 0.48-0.72]), and a 39% and 36% decrease in those involving 16-year-old (IRR 0.61 [95% CI: 0.48-0.79]) and 17-year-old drivers (IRR 0.64 [95% CI: 0.46-0.90]), respectively. The effect in the 15-year-old stratum was decreased roughly by half after adjusting for exposure, but remained significant, and the corresponding estimates in the other age groups did not change noticeably. This study provides quasi-experimental evidence of an effect on non-fatal moped-related injuries as a result of stricter licensing rules. Only part of the effect could be explained by a reduction in the number of mopeds in traffic, indicating that other mechanisms must be studied to fully understand the cause of the reduction in injuries. Copyright © 2015 Elsevier Ltd. All rights reserved.

Universal quantum interfaces

International Nuclear Information System (INIS)

Lloyd, Seth; Landahl, Andrew J.; Slotine, Jean-Jacques E.

2004-01-01

To observe or control a quantum system, one must interact with it via an interface. This article exhibits simple universal quantum interfaces--quantum input/output ports consisting of a single two-state system or quantum bit that interacts with the system to be observed or controlled. It is shown that under very general conditions the ability to observe and control the quantum bit on its own implies the ability to observe and control the system itself. The interface can also be used as a quantum communication channel, and multiple quantum systems can be connected by interfaces to become an efficient universal quantum computer. Experimental realizations are proposed, and implications for controllability, observability, and quantum information processing are explored

Managing the Organizational and Cultural Precursors to Major Events — Recognising and Addressing Complexity

International Nuclear Information System (INIS)

Taylor, R. H.; Carhart, N.; May, J.; Wijk, L. G. A. van

2016-01-01

illustration will be given of the use of Hierarchical Process Modelling (HPM) to develop a vulnerability tool using the question sets. However, to understand the issues involved more fully, requires the development of models and associated tools which recognise the complexity and interactive nature of the organizational and cultural issues involved. Various repeating patterns of system failure appear in most of the events studied. Techniques such as System Dynamics (SD) can be used to ‘map’ these processes and capture the complexity involved. This highlights interdependencies, incubating vulnerabilities and the impact of time lags within systems. Two examples will be given. In almost all of the events studied, there has been a strong disconnect between the knowledge and aspirations of senior management and those planning and carrying out operations. There has, for example, frequently been a failure to ensure that information flows up and down the management chain are effective. It has often led to conflicts between the need to maintain safety standards through exercising a cautious and questioning attitude in the light of uncertainty and the need to meet production and cost targets. Business pressures have led to shortcuts, failure to provide sufficient oversight so that leaders are aware of the true picture of process and nuclear safety at operational level (often leading to organizational ‘drift’), normalisation of risks, and the establishment of a ‘good news culture’. The development of this disconnect and its consequences have been shown to be interdependent, dynamic and complex. A second example is that of gaining a better appreciation of the deeper factors involved in managing the supply chain and, in particular, of the interface with contractors. Initiating projects with unclear accountabilities and to unrealistic timescales, together with a lack of clarity about the cost implications when safety-related concerns are reported and need to be addressed, have

The relationship between perceived usability of a beautiful interface and of an ugly interface

OpenAIRE

Mohammed, Naitullah; Syed.Mohammed, Mahamood Ur Rahman

2012-01-01

The relationship between the perceived usability of a beautiful interface and of an ugly interface is analyzed in this study. This study correlates the visual aesthetics of the website with perceived usability. This research is performed to know the significance of visual aesthetics on perceived usability. A website is designed with two interfaces. One interface is designed by following design guidelines with respect to usability and the other interface is designed without following guideline...

Anticipating and addressing event-specific alcohol consumption among adolescents.

Science.gov (United States)

Pettigrew, Simone; Biagioni, Nicole; Jongenelis, Michelle I

2016-07-29

Various specific events and celebrations are associated with excessive alcohol consumption and related harms. End-of-school celebrations such as Schoolies in Australia are of particular concern given high levels of documented harm among underage and young drinkers. The present study investigated high school students' expectations of their Schoolies celebrations to inform future interventions to reduce adverse outcomes among members of this vulnerable group and other young people involved in similar rites of passage. A link to an online survey was distributed via high schools and Schoolies-related websites. The survey included qualitative questions that invited respondents to discuss (i) aspects of Schoolies they were looking forward to most and least and (ii) their perceptions of the likely consequences if they refrained from consuming alcohol during the event. In total, 435 students provided responses. Respondents discussed the role of Schoolies in marking their transition to adulthood. Their comments revealed a cross-temporal focus indicating that Schoolies is simultaneously symbolic of the past, present, and future. Through its ability to enhance social interaction, alcohol was perceived to have a vital role in realising the potential of this event to signify and facilitate this temporal progression. Results suggest interventions that treat Schoolies as an isolated event that occurs in specific locations may fail to appreciate the extent to which these events transcend time for those involved. Instead, harm reduction is likely to involve a reconceptualisation of the event among both participants and authority figures to facilitate the provision of alternative pastimes to drinking during Schoolies that yield similar social benefits.

Human-machine interface upgrade

International Nuclear Information System (INIS)

Kropik, M.; Matejka, K.; Sklenka, L.; Chab, V.

2002-01-01

The article describes a new human-machine interface that was installed at the VR-1 training reactor. The human-machine interface upgrade was completed in the summer 2001. The interface was designed with respect to functional, ergonomic and aesthetic requirements. The interface is based on a personal computer equipped with two displays. One display enables alphanumeric communication between the reactor operator and the nuclear reactor I and C. The second display is a graphical one. It presents the status of the reactor, principal parameters (as power, period), control rods positions, course of the reactor power. Furthermore, it is possible to set parameters, to show the active core configuration, to perform reactivity calculations, etc. The software for the new human-machine interface was produced with the InTouch developing tool of the Wonder-Ware Company. It is possible to switch the language of the interface between Czech and English because of many foreign students and visitors to the reactor. Microcomputer based communication units with proper software were developed to connect the new human-machine interface with the present reactor I and C. The new human-machine interface at the VR-1 training reactor improves the comfort and safety of the reactor utilisation, facilitates experiments and training, and provides better support for foreign visitors. (orig.)

Experimental Study on Bond-Slip Behavior of Bamboo Bolt-Modified Slurry Interface under Pull-Out Load

Directory of Open Access Journals (Sweden)

Wei Lu

2018-01-01

Full Text Available This paper presents an analysis of bamboo bolt-modified slurry interfaces based on 26 in situ axial pull-out tests intended to highlight the mechanical behavior of interface under a fracture mode. Three impact factors are analyzed: anchorage length, bolt diameter, and bolt hole diameter, using the same materials of bamboo and modified slurry. The result shows that the interface between the bamboo bolt and anchoring agent is the control interface of an anchorage system, and the local behavior of the interface involves four stages: elastic, soften, friction, and decoupling. Distribution law and change trend of slippage, stress, and strain of anchoring interface along with the axial direction of an anchor bolt were analyzed. The result shows that there is effective anchoring length limit in this kind of interface, and that the complete decoupling phenomenon should not be neglected. Through a comparative analysis of the existing bond-slip model and interface bond-slip curve, and considering the correspondence of the strain-slip curve and trilinear bond-slip model simultaneously, a modified trilinear bond-slip model has been proposed. The friction section of this model is limited, and shearing stress in the complete decoupling section is zero.

Comparing the Richtmyer-Meshkov instability of thermal and ion-species interfaces in two-fluid plasmas

Science.gov (United States)

Wheatley, Vincent; Bond, Daryl; Li, Yuan; Samtaney, Ravi; Pullin, Dale

2017-11-01

The Richtmyer-Meshkov instability (RMI) of a shock accelerated perturbed density interface is important in both inertial confinement fusion and astrophysics, where the materials involved are typically in the plasma state. Initial density interfaces can be due to either temperature or ion-species discontinuities. If the Atwood number of the interfaces and specific heat ratios of the fluids are matched, these two cases behave similarly when modeled using the equations of either hydrodynamics or magnetohydrodynamics. In the two-fluid ion-electron plasma model, however, there is a significant difference between them: In the thermal interface case, there is a discontinuity in electron density that is also subject to the RMI, while for the ion-species interface case there is not. It will be shown via ideal two-fluid plasma simulations that this causes substantial differences in the dynamics of the flow between the two cases. This work was partially supported by the KAUST Office of Sponsored Research under Award URF/1/2162-01.

Interfacing microbiology and biotechnology. Conference abstracts

Energy Technology Data Exchange (ETDEWEB)

Maupin, Julia A.

2001-05-19

The Interfacing Microbiology and Biotechnology Conference was attended by over 100 faculty, post-docs, students, and research scientists from the US, Europe, and Latin America. The conference successfully stimulated communication and the dissemination of knowledge among scientists involved in basic and applied research. The focus of the conference was on microbial physiology and genetics and included sessions on C1 metabolism, archaeal metabolism, proteases and chaperones, gene arrays, and metabolic engineering. The meeting provided the setting for in-depth discussions between scientists who are internationally recognized for their research in these fields. The following objectives were met: (1) The promotion of interaction and future collaborative projects among scientists involved in basic and applied research which incorporates microbial physiology, genetics, and biochemistry; (2) the facilitation of communication of new research findings through seminars, posters, and abstracts; (3 ) the stimulation of enthusiasm and education among participants including graduate and undergraduate students.

A two-way interface between limited Systems Biology Markup Language and R

Directory of Open Access Journals (Sweden)

Radivoyevitch Tomas

2004-12-01

Full Text Available Abstract Background Systems Biology Markup Language (SBML is gaining broad usage as a standard for representing dynamical systems as data structures. The open source statistical programming environment R is widely used by biostatisticians involved in microarray analyses. An interface between SBML and R does not exist, though one might be useful to R users interested in SBML, and SBML users interested in R. Results A model structure that parallels SBML to a limited degree is defined in R. An interface between this structure and SBML is provided through two function definitions: write.SBML( which maps this R model structure to SBML level 2, and read.SBML( which maps a limited range of SBML level 2 files back to R. A published model of purine metabolism is provided in this SBML-like format and used to test the interface. The model reproduces published time course responses before and after its mapping through SBML. Conclusions List infrastructure preexisting in R makes it well-suited for manipulating SBML models. Further developments of this SBML-R interface seem to be warranted.

A two-way interface between limited Systems Biology Markup Language and R.

Science.gov (United States)

Radivoyevitch, Tomas

2004-12-07

Systems Biology Markup Language (SBML) is gaining broad usage as a standard for representing dynamical systems as data structures. The open source statistical programming environment R is widely used by biostatisticians involved in microarray analyses. An interface between SBML and R does not exist, though one might be useful to R users interested in SBML, and SBML users interested in R. A model structure that parallels SBML to a limited degree is defined in R. An interface between this structure and SBML is provided through two function definitions: write.SBML() which maps this R model structure to SBML level 2, and read.SBML() which maps a limited range of SBML level 2 files back to R. A published model of purine metabolism is provided in this SBML-like format and used to test the interface. The model reproduces published time course responses before and after its mapping through SBML. List infrastructure preexisting in R makes it well-suited for manipulating SBML models. Further developments of this SBML-R interface seem to be warranted.

Event-by-Event Simulation of Induced Fission

Energy Technology Data Exchange (ETDEWEB)

Vogt, R; Randrup, J

2007-12-13

We are developing a novel code that treats induced fission by statistical (or Monte-Carlo) simulation of individual decay chains. After its initial excitation, the fissionable compound nucleus may either deexcite by evaporation or undergo binary fission into a large number of fission channels each with different energetics involving both energy dissipation and deformed scission prefragments. After separation and Coulomb acceleration, each fission fragment undergoes a succession of individual (neutron) evaporations, leading to two bound but still excited fission products (that may further decay electromagnetically and, ultimately, weakly), as well as typically several neutrons. (The inclusion of other possible ejectiles is planned.) This kind of approach makes it possible to study more detailed observables than could be addressed with previous treatments which have tended to focus on average quantities. In particular, any type of correlation observable can readily be extracted from a generated set of events. With a view towards making the code practically useful in a variety of applications, emphasis is being put on making it numerically efficient so that large event samples can be generated quickly. In its present form, the code can generate one million full events in about 12 seconds on a MacBook laptop computer. The development of this qualitatively new tool is still at an early stage and quantitative reproduction of existing data should not be expected until a number of detailed refinement have been implemented.

Event-by-Event Simulation of Induced Fission

Science.gov (United States)

Vogt, Ramona; Randrup, Jørgen

2008-04-01

We are developing a novel code that treats induced fission by statistical (or Monte-Carlo) simulation of individual decay chains. After its initial excitation, the fissionable compound nucleus may either de-excite by evaporation or undergo binary fission into a large number of fission channels each with different energetics involving both energy dissipation and deformed scission pre-fragments. After separation and Coulomb acceleration, each fission fragment undergoes a succession of individual (neutron) evaporations, leading to two bound but still excited fission products (that may further decay electromagnetically and, ultimately, weakly), as well as typically several neutrons. (The inclusion of other possible ejectiles is planned.) This kind of approach makes it possible to study more detailed observables than could be addressed with previous treatments which have tended to focus on average quantities. In particular, any type of correlation observable can readily be extracted from a generated set of events. With a view towards making the code practically useful in a variety of applications, emphasis is being put on making it numerically efficient so that large event samples can be generated quickly. In its present form, the code can generate one million full events in about 12 seconds on a MacBook laptop computer. The development of this qualitatively new tool is still at an early stage and quantitative reproduction of existing data should not be expected until a number of detailed refinement have been implemented.

Event-by-Event Simulation of Induced Fission

International Nuclear Information System (INIS)

Vogt, Ramona; Randrup, Joergen

2008-01-01

We are developing a novel code that treats induced fission by statistical (or Monte-Carlo) simulation of individual decay chains. After its initial excitation, the fissionable compound nucleus may either de-excite by evaporation or undergo binary fission into a large number of fission channels each with different energetics involving both energy dissipation and deformed scission pre-fragments. After separation and Coulomb acceleration, each fission fragment undergoes a succession of individual (neutron) evaporations, leading to two bound but still excited fission products (that may further decay electromagnetically and, ultimately, weakly), as well as typically several neutrons. (The inclusion of other possible ejectiles is planned.) This kind of approach makes it possible to study more detailed observables than could be addressed with previous treatments which have tended to focus on average quantities. In particular, any type of correlation observable can readily be extracted from a generated set of events. With a view towards making the code practically useful in a variety of applications, emphasis is being put on making it numerically efficient so that large event samples can be generated quickly. In its present form, the code can generate one million full events in about 12 seconds on a MacBook laptop computer. The development of this qualitatively new tool is still at an early stage and quantitative reproduction of existing data should not be expected until a number of detailed refinement have been implemented

Event-by-Event Simulation of Induced Fission

International Nuclear Information System (INIS)

Vogt, R; Randrup, J

2007-01-01

We are developing a novel code that treats induced fission by statistical (or Monte-Carlo) simulation of individual decay chains. After its initial excitation, the fissionable compound nucleus may either deexcite by evaporation or undergo binary fission into a large number of fission channels each with different energetics involving both energy dissipation and deformed scission prefragments. After separation and Coulomb acceleration, each fission fragment undergoes a succession of individual (neutron) evaporations, leading to two bound but still excited fission products (that may further decay electromagnetically and, ultimately, weakly), as well as typically several neutrons. (The inclusion of other possible ejectiles is planned.) This kind of approach makes it possible to study more detailed observables than could be addressed with previous treatments which have tended to focus on average quantities. In particular, any type of correlation observable can readily be extracted from a generated set of events. With a view towards making the code practically useful in a variety of applications, emphasis is being put on making it numerically efficient so that large event samples can be generated quickly. In its present form, the code can generate one million full events in about 12 seconds on a MacBook laptop computer. The development of this qualitatively new tool is still at an early stage and quantitative reproduction of existing data should not be expected until a number of detailed refinement have been implemented

Solar wind stream interfaces

International Nuclear Information System (INIS)

Gosling, J.T.; Asbridge, J.R.; Bame, S.J.; Feldman, W.C.

1978-01-01

Measurements aboard Imp 6, 7, and 8 reveal that approximately one third of all high-speed solar wind streams observed at 1 AU contain a sharp boundary (of thickness less than approx.4 x 10 4 km) near their leading edge, called a stream interface, which separates plasma of distinctly different properties and origins. Identified as discontinuities across which the density drops abruptly, the proton temperature increases abruptly, and the speed rises, stream interfaces are remarkably similar in character from one stream to the next. A superposed epoch analysis of plasma data has been performed for 23 discontinuous stream interfaces observed during the interval March 1971 through August 1974. Among the results of this analysis are the following: (1) a stream interface separates what was originally thick (i.e., dense) slow gas from what was originally thin (i.e., rare) fast gas; (2) the interface is the site of a discontinuous shear in the solar wind flow in a frame of reference corotating with the sun; (3) stream interfaces occur at speeds less than 450 km s - 1 and close to or at the maximum of the pressure ridge at the leading edges of high-speed streams; (4) a discontinuous rise by approx.40% in electron temperature occurs at the interface; and (5) discontinuous changes (usually rises) in alpha particle abundance and flow speed relative to the protons occur at the interface. Stream interfaces do not generally recur on successive solar rotations, even though the streams in which they are embedded often do. At distances beyond several astronomical units, stream interfaces should be bounded by forward-reverse shock pairs; three of four reverse shocks observed at 1 AU during 1971--1974 were preceded within approx.1 day by stream interfaces. Our observations suggest that many streams close to the sun are bounded on all sides by large radial velocity shears separating rapidly expanding plasma from more slowly expanding plasma

Microcomputer interfacing and applications

CERN Document Server

Mustafa, M A

1990-01-01

This is the applications guide to interfacing microcomputers. It offers practical non-mathematical solutions to interfacing problems in many applications including data acquisition and control. Emphasis is given to the definition of the objectives of the interface, then comparing possible solutions and producing the best interface for every situation. Dr Mustafa A Mustafa is a senior designer of control equipment and has written many technical articles and papers on the subject of computers and their application to control engineering.

Introducing an interface between FeynRules and WHIZARD

Energy Technology Data Exchange (ETDEWEB)

Christensen, Neil D. [Pittsburgh Univ., PA (United States). PITTsburgh Particle Physics, Astrophysics and Cosmology Center; Duhr, Claude [Durham Univ. (United Kingdom). Inst. for Particle Physics Phenomenology; Fuks, Benjamin [Strasbourg Univ. (France). Inst. Pluridisciplinaire Hubert Curien - Dept. Recherches Subatomiques; Reuter, Juergen [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany). Theory Group; Freiburg Univ. (Germany). Physikalisches Inst.; Edinburgh Univ. (United Kingdom). School of Physics and Astronomy; Speckner, Christian [Freiburg Univ. (Germany). Physikalisches Inst.

2012-04-15

While Monte Carlo event generators like WHIZARD have become indispensable tools in studying the impact of new physics on collider observables over the last decades, the implementation of new models in such packages has remained a rather awkward and error-prone process. Recently, the FeynRules package was introduced which greatly simplifies this process by providing a single unified model format from which model implementations for many different Monte Carlo codes can be derived automatically. In this note, we present an interface which extends FeynRules to provide this functionality also for the WHIZARD package, thus making WHIZARD's strengths and performance easily available to model builders.

Introducing an interface between FeynRules and WHIZARD

International Nuclear Information System (INIS)

Christensen, Neil D.; Duhr, Claude; Fuks, Benjamin; Reuter, Juergen; Freiburg Univ.; Edinburgh Univ.; Speckner, Christian

2012-04-01

While Monte Carlo event generators like WHIZARD have become indispensable tools in studying the impact of new physics on collider observables over the last decades, the implementation of new models in such packages has remained a rather awkward and error-prone process. Recently, the FeynRules package was introduced which greatly simplifies this process by providing a single unified model format from which model implementations for many different Monte Carlo codes can be derived automatically. In this note, we present an interface which extends FeynRules to provide this functionality also for the WHIZARD package, thus making WHIZARD's strengths and performance easily available to model builders.

Nurses involved in whistleblowing incidents: sequelae for their families.

Science.gov (United States)

Wilkes, Lesley M; Peters, Kath; Weaver, Roslyn; Jackson, Debra

2011-01-01

Nurses involved in whistleblowing often face economic and emotional retaliation, victimization and abuse. Yet for many nurses, one major part of their whistleblowing experience is the negative impact it has on their families. This paper reports findings from a qualitative study pertaining to the effects of whistleblowing on family life from the perspective of the nurses. Using a narrative inquiry approach, fourteen nurses were interviewed who were directly involved in whistleblowing complaints. Data analysis drew out three themes: strained relationships with family members, dislocation of family life, and exposing family to public scrutiny. The harm caused to the nurses involved in a whistleblowing event is not restricted to one party but to all those involved, as the harrowing experience and its consequences are echoed in the family life as well. It is important for organizations to seek strategies that will minimize the harmful effects on nurses' families during whistleblowing events.

Events Marketing Model of Dubai Shopping Festival

Directory of Open Access Journals (Sweden)

K. Prakash Vel

2014-12-01

Full Text Available Cities and places have become major destinations through taking the extra mile of creativity and offering a well-researched package of offerings through systematically planned events. One such leading example in the list of successful festivals that have earned a global reputation due to its uniqueness and creative event offerings is the Dubai Shopping Festival (DSF in the United Arab Emirates. This paper is a case study based description of the internal and external drivers involved in planning and implementing a global event successfully and has captured the various drivers through a structured framework. The analysis serves as a good addition to the existing literature on ‘Events Marketing’. 

Considerations about radioactive events and their psycho social effects

International Nuclear Information System (INIS)

Vasconcelos, Laercia Abreu

1995-01-01

This study presents some behavioral patterns which are observed in the context of a radioactive accident. Comparing three different situations involving radioactive elements, Three Mile Island (USA), Chernobyl (ISC) and Goiania (Brazil), it is observed that, despite the differences in radiological levels, the populations involved show similar response characteristics. The impact of the radioactive events on health has been the main concern of the exposed population, and the response patterns observed in the different radioactive events seem to be less variable than it was proposed in the first studies. (author)

Tracking the El Nino events from Antarctic ice core records

International Nuclear Information System (INIS)

Keskin, S.S.; Oelmez, I.

2004-01-01

Sodium and chlorine measurements were made by instrumental neutron activation analysis (INAA) on stratigraphically dated ice core samples from Byrd Station, Antarctica, for the last three centuries. The time period between 1969 and 1989 showed an enhanced impact on the Antarctic ice sheets from oceans in the form of marine aerosols. A disturbed ocean-atmosphere interface due to El Ni Southern Oscillation (ENSO) events seems to be a candidate for this observation in Antarctica. (author)

Very low frequency earthquakes (VLFEs) detected during episodic tremor and slip (ETS) events in Cascadia using a match filter method indicate repeating events

Science.gov (United States)

Hutchison, A. A.; Ghosh, A.

2016-12-01

Very low frequency earthquakes (VLFEs) occur in transitional zones of faults, releasing seismic energy in the 0.02-0.05 Hz frequency band over a 90 s duration and typically have magntitudes within the range of Mw 3.0-4.0. VLFEs can occur down-dip of the seismogenic zone, where they can transfer stress up-dip potentially bringing the locked zone closer to a critical failure stress. VLFEs also occur up-dip of the seismogenic zone in a region along the plate interface that can rupture coseismically during large megathrust events, such as the 2011 Tohoku-Oki earthquake [Ide et al., 2011]. VLFEs were first detected in Cascadia during the 2011 episodic tremor and slip (ETS) event, occurring coincidentally with tremor [Ghosh et al., 2015]. However, during the 2014 ETS event, VLFEs were spatially and temporally asynchronous with tremor activity [Hutchison and Ghosh, 2016]. Such contrasting behaviors remind us that the mechanics behind such events remain elusive, yet they are responsible for the largest portion of the moment release during an ETS event. Here, we apply a match filter method using known VLFEs as template events to detect additional VLFEs. Using a grid-search centroid moment tensor inversion method, we invert stacks of the resulting match filter detections to ensure moment tensor solutions are similar to that of the respective template events. Our ability to successfully employ a match filter method to VLFE detection in Cascadia intrinsically indicates that these events can be repeating, implying that the same asperities are likely responsible for generating multiple VLFEs.

Brain–muscle interface

Indian Academy of Sciences (India)

2011-05-16

May 16, 2011 ... Clipboard: Brain–muscle interface: The next-generation BMI. Radhika Rajan Neeraj Jain ... Keywords. Assistive devices; brain–machine interface; motor cortex; paralysis; spinal cord injury ... Journal of Biosciences | News ...

TIMOC-ESP, Time-Dependent Response Function by Monte-Carlo with Interface to Program TIMOC-72

International Nuclear Information System (INIS)

Jaarsma, R.; Perlando, J.M.; Rief, H.

1981-01-01

1 - Description of problem or function: TIMOC-ESP is an 'Event Scanning Program' to analyse the events (collision or boundary crossing parameters) of Monte Carlo particle transport problems. It is a modular program and belongs to the TIMOC code system. Whilst TIMOC-72 deals with stationary problems, the time-dependence is dealt with in ESP. TIMOC-ESP is primarily designed to calculate the time-dependent response functions such as energy-dependent fluxes and currents at interfaces. 2 - Method of solution: The output of TIMOC-72 is transferred to TIMOC-ESP using a data set which acts as an interface between the two programs. Time dependent transport events are sampled at each crossing of any specified boundary in TIMOC. TIMOC-72 provides the parameters for ESP which are: - time of the event; - neutron weight; - cosine of the angle between the flight direction and the normal to the surface; - the indices of both regions; - the history number. Fundamentally, three time options are permitted by ESP, which give the current, the angular flux and the time-integrated flux functions between two specified regions. An eventual extension to other quantities is simple and straight- forward - ESP will accept input data for other options such as the calculation of the point flux, the collision density and the flux derived from this estimator, but the coding required for these calculations has yet to be implemented (1977). 3 - Restrictions on the complexity of the problem: The number of parameters must be between 5 and 50. The number of time intervals is at most 50

ATLAS proton-proton event containing two high energy photons

CERN Multimedia

ATLAS Collaboration

2011-01-01

An event where two energetic photons ("gammas") are produced in a proton-proton collision in ATLAS. Many events of this type are produced by well-understood Standard Model processes ("backgrounds") which do not involve Higgs particles. A small excess of events of this type with similar masses could indicate evidence for Higgs particle production, but any specific event is most likely to be from the background. The photons are indicated, in the different projections and views, by the clusters of energy shown in yellow.

Playful user interfaces interfaces that invite social and physical interaction

CERN Document Server

2014-01-01

The book is about user interfaces to applications that have been designed for social and physical interaction. The interfaces are ‘playful’, that is, users feel challenged to engage in social and physical interaction because that will be fun. The topics that will be present in this book are interactive playgrounds, urban games using mobiles, sensor-equipped environments for playing, child-computer interaction, tangible game interfaces, interactive tabletop technology and applications, full-body interaction, exertion games, persuasion, engagement, evaluation, and user experience. Readers of the book will not only get a survey of state-of-the-art research in these areas, but the chapters in this book will also provide a vision of the future where playful interfaces will be ubiquitous, that is, present and integrated in home, office, recreational, sports and urban environments, emphasizing that in the future in these environments game elements will be integrated and welcomed.

Reducing the occurrence of plant events through improved human performance

International Nuclear Information System (INIS)

Ross, T.; Burkhart, A.D.

1993-01-01

During a routine control room surveillance, the reactor operator is distracted by an alarming secondary annunciator and a telephone call. When the reactor operator resumes the surveillance, he inadvertently performs the procedural steps out of order. This causes a reportable nuclear event. How can procedure-related human performance problems such as this be prevented? The question is vitally important for the nuclear industry. The U.S. Nuclear Regulatory Commission's Office for Analysis and Evaluation of Operational Data observed, open-quotes With the perceived reduction in the number of events caused by equipment failures, INPO and other industry groups and human performance experts agree that a key to continued improvement in plant performance and safety is improved human performance.close quotes In fact, open-quotes more than 50% of the reportable events occurring at nuclear power plants involve human error.close quotes Prevention (or correction) of a human performance problem is normally based on properly balancing the following three factors: (1) supervisory involvement; (2) personnel training; and (3) procedures. The nuclear industry is implementing a formula known as ACME, which better balances supervisory involvement, personnel training, and procedures. Webster's New World Dictionary defines acme as the highest point, the peak. ACME human performance is the goal: ACME Adherence to and use of procedures; Self-Checking; Management Involvement; and Event Investigations

Pramana – Journal of Physics | Indian Academy of Sciences

Indian Academy of Sciences (India)

Laser material processing involving welding, ablation and cutting involves interaction of intense laser pulses of nanosecond duration with a condensed phase. Such interaction involving high brightness radiative flux causes multitude of non-linear events involving thermal phase transition at soild–liquid–gas interfaces.

The social-sensory interface: category interactions in person perception.

Science.gov (United States)

Freeman, Jonathan B; Johnson, Kerri L; Adams, Reginald B; Ambady, Nalini

2012-01-01

Research is increasingly challenging the claim that distinct sources of social information-such as sex, race, and emotion-are processed in discrete fashion. Instead, there appear to be functionally relevant interactions that occur. In the present article, we describe research examining how cues conveyed by the human face, voice, and body interact to form the unified representations that guide our perceptions of and responses to other people. We explain how these information sources are often thrown into interaction through bottom-up forces (e.g., phenotypic cues) as well as top-down forces (e.g., stereotypes and prior knowledge). Such interactions point to a person perception process that is driven by an intimate interface between bottom-up perceptual and top-down social processes. Incorporating data from neuroimaging, event-related potentials (ERP), computational modeling, computer mouse-tracking, and other behavioral measures, we discuss the structure of this interface, and we consider its implications and adaptive purposes. We argue that an increased understanding of person perception will likely require a synthesis of insights and techniques, from social psychology to the cognitive, neural, and vision sciences.

Lectures on random interfaces

CERN Document Server

Funaki, Tadahisa

2016-01-01

Interfaces are created to separate two distinct phases in a situation in which phase coexistence occurs. This book discusses randomly fluctuating interfaces in several different settings and from several points of view: discrete/continuum, microscopic/macroscopic, and static/dynamic theories. The following four topics in particular are dealt with in the book. Assuming that the interface is represented as a height function measured from a fixed-reference discretized hyperplane, the system is governed by the Hamiltonian of gradient of the height functions. This is a kind of effective interface model called ∇φ-interface model. The scaling limits are studied for Gaussian (or non-Gaussian) random fields with a pinning effect under a situation in which the rate functional of the corresponding large deviation principle has non-unique minimizers. Young diagrams determine decreasing interfaces, and their dynamics are introduced. The large-scale behavior of such dynamics is studied from the points of view of the hyd...

Online LDA BASED brain-computer interface system to aid disabled people

Directory of Open Access Journals (Sweden)

Apdullah Yayık

2017-06-01

Full Text Available This paper aims to develop brain-computer interface system based on electroencephalography that can aid disabled people in daily life. The system relies on one of the most effective event-related potential wave, P300, which can be elicited by oddball paradigm. Developed application has a basic interaction tool that enables disabled people to convey their needs to other people selecting related objects. These objects pseudo-randomly flash in a visual interface on computer screen. The user must focus on related object to convey desired needs. The system can convey desired needs correctly by detecting P300 wave in acquired 14-channel EEG signal and classifying using linear discriminant analysis classifier just in 15 seconds. Experiments have been carried out on 19 volunteers to validate developed BCI system. As a result, accuracy rate of 90.83% is achieved in online performance.

Sencity : A multi-sensory music event for deaf and hearing people

OpenAIRE

van der Peet, Dominique

2013-01-01

The objective of the project thesis was to provide an insight into event management, especially when organising an event for a specific target group like the deaf community. The event in question is Sencity, a multi-sensory music event for deaf and hearing people which has been organized in various territories but never before in the United Kingdom. Event and project management are an essential part of organising an event. It is important to observe all aspects involved in organising an...

Light Stimulation Properties to Influence Brain Activity: A Brain-CoMputer Interface application

NARCIS (Netherlands)

Bieger, J.; Garcia Molina, G.

2010-01-01

Brain-Computer Interfaces (BCIs) enable people to control appliances without involving the normal output pathways of peripheral nervesand muscles. A particularly promising type of BCI is based on the Steady-State Visual Evoked Potential (SSVEP). Users can selectcommands by focusing their attention

Project and implementation of the human/system interface laboratory

International Nuclear Information System (INIS)

Carvalho, Paulo Victor R. de; Obadia, Isaac Jose; Vidal, Mario Cesar Rodriguez

2002-01-01

Analog instrumentation is being increasingly replaced by digital technology in new nuclear power plants, such as Angra III, as well as in existing operating plants, such as Angra I and II, for modernization and life-extension projects. In this new technological environment human factors issues aims to minimize failures in nuclear power plants operation due to human error. It is well known that 30% to 50% of the detected unforeseen problems involve human errors. Presently, human factors issues must be considered during the development of advanced human-system interfaces for the plant. IAEA has considered the importance of those issues and has published TECDOC's and Safety Series Issues on the matter. Thus, there is a need to develop methods and criteria to asses, compare, optimize and validate the human-system interface associated with totally new or hybrid control rooms. Also, the use of computer based operator aids is en evolving area. In order to assist on the development of methods and criteria and to evaluate the effects of the new design concepts and computerized support systems on operator performance, research simulators with advanced control rooms technology, such the IEN's Human System Interface Laboratory, will provide the necessary setting. (author)

Organizing the public health-clinical health interface: theoretical bases.

Science.gov (United States)

St-Pierre, Michèle; Reinharz, Daniel; Gauthier, Jacques-Bernard

2006-01-01

This article addresses the issue of the interface between public health and clinical health within the context of the search for networking approaches geared to a more integrated delivery of health services. The articulation of an operative interface is complicated by the fact that the definition of networking modalities involves complex intra- and interdisciplinary and intra- and interorganizational systems across which a new transversal dynamics of intervention practices and exchanges between service structures must be established. A better understanding of the situation is reached by shedding light on the rationale underlying the organizational methods that form the bases of the interface between these two sectors of activity. The Quebec experience demonstrates that neither the structural-functionalist approach, which emphasizes remodelling establishment structures and functions as determinants of integration, nor the structural-constructivist approach, which prioritizes distinct fields of practice in public health and clinical health, adequately serves the purpose of networking and integration. Consequently, a theoretical reframing is imperative. In this regard, structuration theory, which fosters the simultaneous study of methods of inter-structure coordination and inter-actor cooperation, paves the way for a better understanding of the situation and, in turn, to the emergence of new integration possibilities.

Tangible User Interface and Mu Rhythm Suppression: The Effect of User Interface on the Brain Activity in Its Operator and Observer

Directory of Open Access Journals (Sweden)

Kazuo Isoda

2017-03-01

Full Text Available The intuitiveness of tangible user interface (TUI is not only for its operator. It is quite possible that this type of user interface (UI can also have an effect on the experience and learning of observers who are just watching the operator using it. To understand the possible effect of TUI, the present study focused on the mu rhythm suppression in the sensorimotor area reflecting execution and observation of action, and investigated the brain activity both in its operator and observer. In the observer experiment, the effect of TUI on its observers was demonstrated through the brain activity. Although the effect of the grasping action itself was uncertain, the unpredictability of the result of the action seemed to have some effect on the mirror neuron system (MNS-related brain activity. In the operator experiment, in spite of the same grasping action, the brain activity was activated in the sensorimotor area when UI functions were included (TUI. Such activation of the brain activity was not found with a graphical user interface (GUI that has UI functions without grasping action. These results suggest that the MNS-related brain activity is involved in the effect of TUI, indicating the possibility of UI evaluation based on brain activity.

Improving brain computer interface research through user involvement - The transformative potential of integrating civil society organisations in research projects

Science.gov (United States)

Wakunuma, Kutoma; Rainey, Stephen; Hansen, Christian

2017-01-01

Research on Brain Computer Interfaces (BCI) often aims to provide solutions for vulnerable populations, such as individuals with diseases, conditions or disabilities that keep them from using traditional interfaces. Such research thereby contributes to the public good. This contribution to the public good corresponds to a broader drive of research and funding policy that focuses on promoting beneficial societal impact. One way of achieving this is to engage with the public. In practical terms this can be done by integrating civil society organisations (CSOs) in research. The open question at the heart of this paper is whether and how such CSO integration can transform the research and contribute to the public good. To answer this question the paper describes five detailed qualitative case studies of research projects including CSOs. The paper finds that transformative impact of CSO integration is possible but by no means assured. It provides recommendations on how transformative impact can be promoted. PMID:28207882

Improving brain computer interface research through user involvement - The transformative potential of integrating civil society organisations in research projects.

Science.gov (United States)

Stahl, Bernd Carsten; Wakunuma, Kutoma; Rainey, Stephen; Hansen, Christian

2017-01-01

Research on Brain Computer Interfaces (BCI) often aims to provide solutions for vulnerable populations, such as individuals with diseases, conditions or disabilities that keep them from using traditional interfaces. Such research thereby contributes to the public good. This contribution to the public good corresponds to a broader drive of research and funding policy that focuses on promoting beneficial societal impact. One way of achieving this is to engage with the public. In practical terms this can be done by integrating civil society organisations (CSOs) in research. The open question at the heart of this paper is whether and how such CSO integration can transform the research and contribute to the public good. To answer this question the paper describes five detailed qualitative case studies of research projects including CSOs. The paper finds that transformative impact of CSO integration is possible but by no means assured. It provides recommendations on how transformative impact can be promoted.

Anticipating and addressing event-specific alcohol consumption among adolescents

Directory of Open Access Journals (Sweden)

Simone Pettigrew

2016-07-01

Full Text Available Abstract Background Various specific events and celebrations are associated with excessive alcohol consumption and related harms. End-of-school celebrations such as Schoolies in Australia are of particular concern given high levels of documented harm among underage and young drinkers. The present study investigated high school students’ expectations of their Schoolies celebrations to inform future interventions to reduce adverse outcomes among members of this vulnerable group and other young people involved in similar rites of passage. Methods A link to an online survey was distributed via high schools and Schoolies-related websites. The survey included qualitative questions that invited respondents to discuss (i aspects of Schoolies they were looking forward to most and least and (ii their perceptions of the likely consequences if they refrained from consuming alcohol during the event. In total, 435 students provided responses. Results Respondents discussed the role of Schoolies in marking their transition to adulthood. Their comments revealed a cross-temporal focus indicating that Schoolies is simultaneously symbolic of the past, present, and future. Through its ability to enhance social interaction, alcohol was perceived to have a vital role in realising the potential of this event to signify and facilitate this temporal progression. Conclusions Results suggest interventions that treat Schoolies as an isolated event that occurs in specific locations may fail to appreciate the extent to which these events transcend time for those involved. Instead, harm reduction is likely to involve a reconceptualisation of the event among both participants and authority figures to facilitate the provision of alternative pastimes to drinking during Schoolies that yield similar social benefits.

Safeguards Summary Event List (SSEL). January 1, 1990--December 31, 1994, Volume 2, Revision 3

International Nuclear Information System (INIS)

1995-07-01

The Safeguards Summary Event List provides brief summaries of hundreds of safeguards-related events involving nuclear material or facilities regulated by the US Nuclear Regulatory Commission. Events are described under the categories: Bomb-related, Intrusion, Missing/Allegedly Stolen, Transportation-related, Tampering/Vandalism, Arson, Firearms-related, Radiological Sabotage, Non-radiological Sabotage, and Miscellaneous. Because of the public interest, the Miscellaneous category also includes events reported involving source material, byproduct material, and natural uranium, which are exempt from safeguards requirements. Information in the event descriptions was obtained from official NRC sources

Model driven development of user interface prototypes

DEFF Research Database (Denmark)

Störrle, Harald

2010-01-01

the whole UI development life cycle, connect all stakeholders involved, and support a wide range of levels of granularity and abstraction. This is achieved by using Window/Event-Diagrams (WEDs), a UI specification notation based on UML 2 state machines. It affords closer collaboration between different user...

Interface superconductivity

Energy Technology Data Exchange (ETDEWEB)

Gariglio, S., E-mail: stefano.gariglio@unige.ch [DQMP, Université de Genève, 24 Quai E.-Ansermet, CH-1211 Genève (Switzerland); Gabay, M. [Laboratoire de Physique des Solides, Bat 510, Université Paris-Sud 11, Centre d’Orsay, 91405 Orsay Cedex (France); Mannhart, J. [Max Planck Institute for Solid State Research, 70569 Stuttgart (Germany); Triscone, J.-M. [DQMP, Université de Genève, 24 Quai E.-Ansermet, CH-1211 Genève (Switzerland)

2015-07-15

Highlights: • We discuss interfacial superconductivity, a field boosted by the discovery of the superconducting interface between LaAlO. • This system allows the electric field control and the on/off switching of the superconducting state. • We compare superconductivity at the interface and in bulk doped SrTiO. • We discuss the role of the interfacially induced Rashba type spin–orbit. • We briefly discuss superconductivity in cuprates, in electrical double layer transistor field effect experiments. • Recent observations of a high T{sub c} in a monolayer of FeSe deposited on SrTiO{sub 3} are presented. - Abstract: Low dimensional superconducting systems have been the subject of numerous studies for many years. In this article, we focus our attention on interfacial superconductivity, a field that has been boosted by the discovery of superconductivity at the interface between the two band insulators LaAlO{sub 3} and SrTiO{sub 3}. We explore the properties of this amazing system that allows the electric field control and on/off switching of superconductivity. We discuss the similarities and differences between bulk doped SrTiO{sub 3} and the interface system and the possible role of the interfacially induced Rashba type spin–orbit. We also, more briefly, discuss interface superconductivity in cuprates, in electrical double layer transistor field effect experiments, and the recent observation of a high T{sub c} in a monolayer of FeSe deposited on SrTiO{sub 3}.

Transcriptomic events involved in melon mature-fruit abscission comprise the sequential induction of cell-wall degrading genes coupled to a stimulation of endo and exocytosis.

Directory of Open Access Journals (Sweden)

Jorge Corbacho

Full Text Available Mature-fruit abscission (MFA in fleshy-fruit is a genetically controlled process with mechanisms that, contrary to immature-fruit abscission, has not been fully characterized. Here, we use pyrosequencing to characterize the transcriptomes of melon abscission zone (AZ at three stages during AZ-cell separation in order to understand MFA control at an early stage of AZ-activation.The results show that by early induction of MFA, the melon AZ exhibits major gene induction, while by late induction of MFA, melon AZ shows major gene repression. Although some genes displayed similar regulation in both early and late induction of abscission, such as EXT1-EXT4, EGase1, IAA2, ERF1, AP2D15, FLC, MADS2, ERAF17, SAP5 and SCL13 genes, the majority had different expression patterns. This implies that time-specific events occur during MFA, and emphasizes the value of characterizing multiple time-specific abscission transcriptomes. Analysis of gene-expression from these AZs reveal that a sequential induction of cell-wall-degrading genes is associated with the upregulation of genes involved in endo and exocytosis, and a shift in plant-hormone metabolism and signaling genes during MFA. This is accompanied by transcriptional activity of small-GTPases and synthaxins together with tubulins, dynamins, V-type ATPases and kinesin-like proteins potentially involved in MFA signaling. Early events are potentially controlled by down-regulation of MADS-box, AP2/ERF and Aux/IAA transcription-factors, and up-regulation of homeobox, zinc finger, bZIP, and WRKY transcription-factors, while late events may be controlled by up-regulation of MYB transcription-factors.Overall, the data provide a comprehensive view on MFA in fleshy-fruit, identifying candidate genes and pathways associated with early induction of MFA. Our comprehensive gene-expression profile will be very useful for elucidating gene regulatory networks of the MFA in fleshy-fruit.

Safeguards Summary Event List (SSEL). Pre-NRC through June 30, 1981

International Nuclear Information System (INIS)

MacMurdy, P.; Davidson, J.; Lin, H.

1981-09-01

The Safeguards Summary Event List (SSEL) provides brief summaries of several hundred safeguards-related events involving nuclear material or facilities regulated by the U.S. Nuclear Regulatory Commission (NRC). Events are described under the categories of bomb-related, intrusion, missing and/or allegedly stolen, transportation, vandalism, arson, firearms, sabotage and miscellaneous. The information contained in the event descriptions is derived primarily from official NRC reporting channels

Experimental study of heat and mass transfer across a density interface; Etude experimentale des transferts de chaleur et de masse a travers une interface de densite

Energy Technology Data Exchange (ETDEWEB)

Zellouf, Y.

2004-11-15

This work is part of a major research program on stratified flows encountered in the storage tanks of liquid natural gas. The subject of this dissertation concerns more particularly the problem of heat and mass transfer across a density interface. These flows are complex by nature due to the combination of three parameters: density difference {delta}{rho} across the interface, turbulence intensity u' in the homogeneous layers and the diffusivity K of the stratifying components. To control the operational conditions of the liquid gas storage, it is crucial to have a universal physical model to estimate the fluxes across the interface and to predict the brutal mixing of homogeneous layers commonly called the 'roll-over' event. In this work heat and mass transfer across an interface is measured in the presence of turbulence generated by vertical oscillation of two grids. Turbulent velocity field is measured in a homogeneous environment by Particle Image velocimetry (PIV). It shows that the turbulence generated by the two grids is homogeneous and isotropic in the vertical plan. We have established, based on this measurements, an experimental decay law of the turbulence intensity as a function of the flow parameters and the distance from the grids. Stratifications have been followed in time by recording the vertical profiles of temperature and density. Measured heat and mass fluxes are presented as a function of the three flow parameters (u', {delta}{rho}, K) through the non-dimensional numbers: Richardson number Ri g({delta}{rho}/{rho}{sub 0})(l'/u'{sup 2}) and Peclet number Pe = u'l'/K. Measurements show that these two parameters have opposite effects on transfer phenomena. While thermal diffusivity favours the entrainment near the interface, the stratification effect limits this entrainment. This fact is explained by analysing the interface structure. A phenomenological model is then proposed which takes into account these

Exploration of fluorine chemistry at the multidisciplinary interface of chemistry and biology.

Science.gov (United States)

Ojima, Iwao

2013-07-05

Over the last three decades, my engagement in "fluorine chemistry" has evolved substantially because of the multidisciplinary nature of the research programs. I began my research career as a synthetic chemist in organometallic chemistry and homogeneous catalysis directed toward organic synthesis. Then, I was brought into a very unique world of "fluorine chemistry" in the end of 1970s. I started exploring the interface of fluorine chemistry and transition metal homogeneous catalysis first, which was followed by amino acids, peptides, and peptidomimetics for medicinal chemistry. Since then, I have been exploring the interfaces of fluorine chemistry and multidisciplinary fields of research involving medicinal chemistry, chemical biology, cancer biology, and molecular imaging. This perspective intends to cover my fruitful endeavor in the exploration of fluorine chemistry at the multidisciplinary interface of chemistry and biology in a chronological order to show the evolution of my research interest and strategy.

Strategy Innovation with Employee Involvement

DEFF Research Database (Denmark)

Friis, Ole Uhrskov; Koch, Christian

2015-01-01

The purpose of this article is to investigate how employees can be involved in strategy innovation processes and how new strategy practices (new tools and procedures) are used to change strategy praxis in order to sustain value creation. In the strategizing actions, we found that even...... if the managers still dominate, some processes of direct involvement of employees occur, in particular when employees are asked to supplement overall strategic goals and when they directly shape several sub-strategies. Strategy practices found include strategy planning, an open space workshop and organised...... strategy projects. Especially the latter two are important in facilitating the employee involvement. The case, however, also exhibits enterprise-situated praxises related to unplanned events, like the mitigation of taboos....

Blind Source Separation of Event-Related EEG/MEG.

Science.gov (United States)

Metsomaa, Johanna; Sarvas, Jukka; Ilmoniemi, Risto Juhani

2017-09-01

Blind source separation (BSS) can be used to decompose complex electroencephalography (EEG) or magnetoencephalography data into simpler components based on statistical assumptions without using a physical model. Applications include brain-computer interfaces, artifact removal, and identifying parallel neural processes. We wish to address the issue of applying BSS to event-related responses, which is challenging because of nonstationary data. We introduce a new BSS approach called momentary-uncorrelated component analysis (MUCA), which is tailored for event-related multitrial data. The method is based on approximate joint diagonalization of multiple covariance matrices estimated from the data at separate latencies. We further show how to extend the methodology for autocovariance matrices and how to apply BSS methods suitable for piecewise stationary data to event-related responses. We compared several BSS approaches by using simulated EEG as well as measured somatosensory and transcranial magnetic stimulation (TMS) evoked EEG. Among the compared methods, MUCA was the most tolerant one to noise, TMS artifacts, and other challenges in the data. With measured somatosensory data, over half of the estimated components were found to be similar by MUCA and independent component analysis. MUCA was also stable when tested with several input datasets. MUCA is based on simple assumptions, and the results suggest that MUCA is robust with nonideal data. Event-related responses and BSS are valuable and popular tools in neuroscience. Correctly designed BSS is an efficient way of identifying artifactual and neural processes from nonstationary event-related data.

Using Low-Frequency Earthquakes to Investigate Slow Slip Processes and Plate Interface Structure Beneath the Olympic Peninsula, WA

Science.gov (United States)

Chestler, Shelley

This dissertation seeks to further understand the LFE source process, the role LFEs play in generating slow slip, and the utility of using LFEs to examine plate interface structure. The work involves the creation and investigation of a 2-year-long catalog of low-frequency earthquakes beneath the Olympic Peninsula, Washington. In the first chapter, we calculate the seismic moments for 34,264 low-frequency earthquakes (LFEs) beneath the Olympic Peninsula, WA. LFE moments range from 1.4x1010- 1.9x1012 N-m (M W=0.7-2.1). While regular earthquakes follow a power-law moment-frequency distribution with a b-value near 1 (the number of events increases by a factor of 10 for each unit increase in MW), we find that while for large LFEs the b-value is ˜6, for small LFEs it is families, or spots on the plate interface where LFEs repeat, can also be fit by exponential distributions. An exponential moment-frequency distribution implies a scale-limited source process. We consider two end-member models where LFE moment is limited by (1) the amount of slip or (2) slip area. We favor the area-limited model. Based on the observed exponential distribution of LFE moment and geodetically observed total slip we estimate that the total area that slips within an LFE family has a diameter of 300 m. Assuming an area-limited model, we estimate the slips, sub-patch diameters, stress drops, and slip rates for LFEs during ETS events. We allow for LFEs to rupture smaller sub-patches within the LFE family patch. Models with 1-10 sub-patches produce slips of 0.1-1 mm, sub-patch diameters of 80-275 m, and stress drops of 30-1000 kPa. While one sub-patch is often assumed, we believe 3-10 sub-patches are more likely. In the second chapter, using high-resolution relative low-frequency earthquake (LFE) locations, we calculate the patch areas (Ap) of LFE families. During Episodic Tremor and Slip (ETS) events, we define AT as the area that slips during LFEs and ST as the total amount of summed LFE slip

Observation of monojet events and tentative interpretation

Science.gov (United States)

Buskulic, D.; Casper, D.; de Bonis, I.; Decamp, D.; Ghez, P.; Goy, C.; Lees, J.-P.; Minard, M.-N.; Odier, P.; Pietrzyk, B.; Ariztazabal, F.; Chmeissani, M.; Crespo, J. M.; Efthymiopoulos, I.; Fernandez, E.; Fernandez-Bosman, M.; Gaitan, V.; Garrido, Ll.; Martinez, M.; Mattison, T.; Orteu, S.; Pacheco, A.; Padilla, C.; Palla, F.; Pascual, A.; Perlas, J. A.; Teubert, F.; Creanza, D.; de Palma, M.; Farilla, A.; Iaselli, G.; Maggi, G.; Marinelli, N.; Natali, S.; Nuzzo, S.; Ranieri, A.; Raso, G.; Romano, F.; Ruggieri, F.; Selvaggi, G.; Silvestris, L.; Tempesta, P.; Zito, G.; Chai, Y.; Huang, D.; Huang, X.; Lin, J.; Wang, T.; Xie, Y.; Xu, D.; Zhang, J.; Zhang, L.; Zhao, W.; Donvicini, G.; Boudreau, J.; Comas, P.; Coyle, P.; Drevermann, H.; Engelhardt, A.; Foà, L.; Forty, R. W.; Ganis, G.; Gay, C.; Girone, M.; Hagelberg, R.; Harvey, J.; Jacobsen, R.; Jost, B.; Knobloch, J.; Lehraus, I.; Maggi, M.; Markou, C.; Martin, E. B.; Mato, P.; Meinhard, H.; Minten, A.; Miquel, R.; Palazzi, P.; Pater, J. R.; Perrodo, P.; Pusztaszeri, J.-F.; Ranjard, F.; Rolandi, L.; Rothberg, J.; Saich, M.; Schlatter, D.; Schmelling, M.; Tejessy, W.; Tomalin, I. R.; Veenhof, R.; Venturi, A.; Wachsmuth, H.; Wasserbaech, S.; Wiedenmann, W.; Wildish, T.; Witzeling, W.; Wotschack, J.; Ajaltouni, Z.; Bardadin-Otwinowska, M.; Barres, A.; Boyer, C.; Falvard, A.; Gay, P.; Guicheney, C.; Henrard, P.; Jousset, J.; Michel, B.; Montret, J.-C.; Pallin, D.; Perret, P.; Podlyski, F.; Proriol, J.; Saadi, F.; Fearnley, T.; Hansen, J. B.; Hansen, J. D.; Hansen, J. R.; Hansen, P. H.; Johnson, S. D.; Møllerud, R.; Nilsson, B. S.; Kyriakis, A.; Simopoulou, E.; Siotis, I.; Vayaki, A.; Zachariadou, K.; Blondel, A.; Bonneaud, G.; Brient, J. C.; Bourdon, P.; Passalacqua, L.; Rougé, A.; Rumpf, M.; Tanaka, R.; Valassi, A.; Verderi, M.; Videau, H.; Candlin, D. J.; Parsons, M. I.; Veitch, E.; Focardi, E.; Parrini, G.; Corden, M.; Delfino, M.; Georgiopoulos, C.; Jaffe, D. E.; Levinthal, D.; Antonelli, A.; Bencivenni, G.; Bologna, G.; Bossi, F.; Campana, P.; Capon, G.; Cerutti, F.; Chiarella, V.; Felici, G.; Laurelli, P.; Mannocchi, G.; Murtas, F.; Murtas, G. P.; Pepe-Altarelli, M.; Salomone, S.; Colrain, P.; Ten Have, I.; Knowles, I. G.; Lynch, J. G.; Maitland, W.; Morton, W. T.; Raine, C.; Reeves, P.; Scarr, J. M.; Smith, K.; Smith, M. G.; Thompson, A. S.; Thorn, S.; Turnbull, R. M.; Becker, U.; Braun, O.; Geweniger, C.; Hanke, P.; Hepp, V.; Kluge, E. E.; Putzer, A.; Rensch, B.; Schmidt, M.; Stenzel, H.; Tittel, K.; Wunsch, M.; Beuselinck, R.; Binnie, D. M.; Cameron, W.; Cattaneo, M.; Colling, D. J.; Dornan, P. J.; Hassard, J. F.; Konstantinidis, N.; Moneta, L.; Moutoussi, A.; Nash, J.; Payne, D. G.; San Martin, G.; Sedgbeer, J. K.; Wright, A. G.; Girtler, P.; Kuhn, D.; Rudolph, G.; Vogl, R.; Bowdery, C. K.; Brodbeck, T. J.; Finch, A. J.; Foster, F.; Hughes, G.; Jackson, D.; Keemer, N. R.; Nuttall, M.; Patel, A.; Sloan, T.; Snow, S. W.; Whelan, E. P.; Galla, A.; Greene, A. M.; Kleinknecht, K.; Raab, J.; Renk, B.; Sander, H.-G.; Schmidt, H.; Walther, S. M.; Wanke, R.; Wolf, B.; Bencheikh, A. M.; Benchouk, C.; Bonissent, A.; Calvet, D.; Carr, J.; Diaconu, C.; Etienne, F.; Nicod, D.; Payre, P.; Roos, L.; Rousseau, D.; Schwemling, P.; Talby, M.; Abt, I.; Adlung, S.; Assmann, R.; Bauer, C.; Blum, W.; Brown, D.; Cattaneo, P.; Dehning, B.; Dietl, H.; Dydak, F.; Frank, M.; Halley, A. W.; Jakobs, K.; Kroha, H.; Lauber, J.; Lütjens, G.; Lutz, G.; Männer, W.; Moser, H.-G.; Richter, R.; Schröder, J.; Schwarz, A. S.; Settles, R.; Seywerd, H.; Stierlin, U.; Stiegler, U.; St. Denis, R.; Wolf, G.; Alemany, R.; Boucrot, J.; Callot, O.; Cordier, A.; Courault, F.; Davier, M.; Duflot, L.; Grivaz, J.-F.; Heusse, Ph.; Jacquet, M.; Janot, P.; Kim, D. W.; Le Diberder, F.; Lefrançois, J.; Lutz, A.-M.; Musolino, G.; Nikolic, I.; Park, H. J.; Park, I. C.; Schune, M.-H.; Simion, S.; Veillet, J.-J.; Videau, I.; Abbaneo, D.; Bagliwsi, G.; Batignani, G.; Bottigli, U.; Bozzi, C.; Calderini, G.; Carpinelli, M.; Ciocci, M. A.; Ciulli, V.; Dell'Orso, R.; Ferrante, I.; Fidecaro, F.; Forti, F.; Giassi, A.; Giorgi, M. A.; Gregorio, A.; Ligabue, F.; Lusiani, A.; Marrocchesi, P. S.; Messineo, A.; Rizzo, G.; Sanguinetti, G.; Spagnolo, P.; Steinberger, J.; Tenchini, R.; Tonelli, G.; Triggiani, G.; Vannini, C.; Verdini, P. G.; Walsh, J.; Betteridge, A. P.; Gao, Y.; Green, M. G.; Johnson, D. L.; March, P. V.; Medcalf, T.; Mir, Ll. M.; Quazi, I. S.; Strong, J. A.; Bertin, V.; Botterill, D. R.; Clifft, R. W.; Edgecock, T. R.; Haywood, S.; Edwards, M.; Norton, P. R.; Thompson, J. C.; Bloch-Devaux, B.; Colas, P.; Duarte, H.; Emery, S.; Kozanecki, W.; Lançon, E.; Lemaire, M. C.; Locci, E.; Marx, B.; Perez, P.; Rander, J.; Renardy, J.-F.; Rosowsky, A.; Roussarie, A.; Schuller, J.-P.; Schwindling, J.; Si Mohand, D.; Vallage, B.; Johnson, R. P.; Litke, A. M.; Taylor, G.; Wear, J.; Beddall, A.; Booth, C. N.; Cartwright, S.; Combley, F.; Dawson, I.; Koksal, A.; Rankin, C.; Thompson, L. F.; Böhrer, A.; Brandt, S.; Cowan, G.; Feigl, E.; Grupen, C.; Lutters, G.; Minguet-Rodriguez, J.; Rivera, F.; Saraiva, P.; Schäfer, U.; Smolik, L.; Bosisio, L.; Della Marina, R.; Giannini, G.; Gobbo, B.; Pitis, L.; Ragusa, F.; Bellantoni, L.; Conway, J. S.; Feng, Z.; Ferguson, D. P. S.; Gao, Y. S.; Grahl, J.; Harton, J. L.; Hayes, O. J.; Hu, H.; Nachtman, J. M.; Pan, Y. B.; Saadi, Y.; Schmitt, M.; Scott, I.; Sharma, V.; Turk, J. D.; Walsh, A. M.; Weber, F. V.; San Lan Wu; Wu, X.; Yamartino, J. M.; Zheng, M.; Zobernig, G.; Aleph Collaboration

1994-08-01

A data sample corresponding to almost two million hadronic Z decays collected by the ALEPH detector at LEP has been searched for monojet events. Three events were found, in agreement with the expectation from the process ee→γ*vvbar, with γ*→ffbar. Two events are hadronic, the third one being an e+e- pair. All monojet masses are in excess of 3 GeV/c2, and two of the event have large transverse momenta: 18.5 and 20.3 GeV/c. These kinematic characteristics are quite unlikely in the process ee→γ*vvbar. The probability of their occurence increases substantially when processes involving further Z or W exchanges are taken into account, but still remains at the 5% level.

Magnons and interface magnetic substructures

International Nuclear Information System (INIS)

Djafari-Rouhani, B.; Dobrzynski, L.

1975-01-01

The localized magnons at an interface between two Heisenberg ferromagnets and the ferromagnetic stability at the interface are studied. The authors consider simple cubic crystals having the same lattice parameter and the same spin value in the fundamental state on each site, but different exchange integrals between first and second nearest neighbours. An interface by coupling two semi-infinite crystals having the same crystallographic surface is defined. The conditions for the existence of localized magnons at (001) interfaces as well as the dispersion curves of localized and resonant magnons in the high symmetry directions of the Brillouin zone are studied. The effect of the interface interactions on these modes is determined. It is shown that magnetic superstructures may exist at (110) interfaces. Such an instability is given by the existence of a soft localized mode at the interface [fr

Thermal transport across metal silicide-silicon interfaces: First-principles calculations and Green's function transport simulations

Science.gov (United States)

Sadasivam, Sridhar; Ye, Ning; Feser, Joseph P.; Charles, James; Miao, Kai; Kubis, Tillmann; Fisher, Timothy S.

2017-02-01

Heat transfer across metal-semiconductor interfaces involves multiple fundamental transport mechanisms such as elastic and inelastic phonon scattering, and electron-phonon coupling within the metal and across the interface. The relative contributions of these different transport mechanisms to the interface conductance remains unclear in the current literature. In this work, we use a combination of first-principles calculations under the density functional theory framework and heat transport simulations using the atomistic Green's function (AGF) method to quantitatively predict the contribution of the different scattering mechanisms to the thermal interface conductance of epitaxial CoSi2-Si interfaces. An important development in the present work is the direct computation of interfacial bonding from density functional perturbation theory (DFPT) and hence the avoidance of commonly used "mixing rules" to obtain the cross-interface force constants from bulk material force constants. Another important algorithmic development is the integration of the recursive Green's function (RGF) method with Büttiker probe scattering that enables computationally efficient simulations of inelastic phonon scattering and its contribution to the thermal interface conductance. First-principles calculations of electron-phonon coupling reveal that cross-interface energy transfer between metal electrons and atomic vibrations in the semiconductor is mediated by delocalized acoustic phonon modes that extend on both sides of the interface, and phonon modes that are localized inside the semiconductor region of the interface exhibit negligible coupling with electrons in the metal. We also provide a direct comparison between simulation predictions and experimental measurements of thermal interface conductance of epitaxial CoSi2-Si interfaces using the time-domain thermoreflectance technique. Importantly, the experimental results, performed across a wide temperature range, only agree well with

The interface effect

CERN Document Server

Galloway, Alexander R

2013-01-01

Interfaces are back, or perhaps they never left. The familiar Socratic conceit from the Phaedrus, of communication as the process of writing directly on the soul of the other, has returned to center stage in today's discussions of culture and media. Indeed Western thought has long construed media as a grand choice between two kinds of interfaces. Following the optimistic path, media seamlessly interface self and other in a transparent and immediate connection. But, following the pessimistic path, media are the obstacles to direct communion, disintegrating self and other into misunderstanding

Graphical Interfaces for Simulation.

Science.gov (United States)

Hollan, J. D.; And Others

This document presents a discussion of the development of a set of software tools to assist in the construction of interfaces to simulations and real-time systems. Presuppositions to the approach to interface design that was used are surveyed, the tools are described, and the conclusions drawn from these experiences in graphical interface design…

The operator interface for the Mirror Fusion Test Facility

International Nuclear Information System (INIS)

Lang, N.C.

1986-12-01

The uncertain and most likely changing nature of a large experimental facility like MFTF, as well as its large number of control and monitor points, ruled against the traditional hardware approach involving walls of knobs, dials, oscilloscopes, and strip chart recorders. Rather, from the beginning, project management specified computer control of all systems, and operation of the complete MFTF under an integrated computer control system became a major engineering goal. The Integrated Controls and Diagnostics (ICADS) group was charged with the design and implementation of this control system. We designed a control system with an extremely flexible operator interface which uses computer generated CRT displays for output and pointing devices such as touch sensitive CRT overlays, mice, and joysticks for input. Construction of MFTF was completed at the end of 1985 within the project budget of $241.6M and was followed immediately by a 5 month long acceptance test. During this period (known as PACE test) operators, engineers, and physicists successfully used our computer control system daily to test MFTF. Much of their willingness to forsake the traditional hands-on hardware approach to testing was a result of the powerful and flexible operator interface to the MFTF control system. In this paper, we describe the operator interface with emphasis on the displays, the touch screens, and the mouse. We also report the experiences of users and, in particular, stress those aspects of the user interface they strongly liked and disliked

Weak interfaces for UV cure nanoimprint lithography

Science.gov (United States)

Houle, Frances; Fornof, Ann; Simonyi, Eva; Miller, Dolores; Truong, Hoa

2008-03-01

Nanoimprint lithography using a photocurable organic resist provides a means of patterning substrates with a spatial resolution in the few nm range. The usefulness of the technique is limited by defect generation during template removal, which involves fracture at the interface between the template and the newly cured polymer. Although it is critical to have the lowest possible interfacial fracture toughness (Gc less than 0.1 Jm-2) to avoid cohesive failure in the polymer, there is little understanding on how to achieve this using reacting low viscosity resist fluids. Studies of debonding of a series of free-radical cured polyhedral silsesquioxane crosslinker formulations containing selected reactive diluents from fluorosilane-coated quartz template materials will be described. At constant diluent fraction the storage modulus of cured resists follows trends in initial reaction rate, not diluent Tg. Adhesion is uncorrelated with both Tg and storage modulus. XPS studies of near-interface compositions indicate that component segregation within the resist fluid on contact with the template, prior to cure, plays a significant role in controlling the fracture process.

The Data Party: Involving Stakeholders in Meaningful Data Analysis

Science.gov (United States)

Franz, Nancy K.

2013-01-01

A hallmark of Extension includes the involvement of stakeholders in research and program needs assessment, design, implementation, evaluation, and reporting. A data party can be used to enhance this stakeholder involvement specifically in data analysis. This type of event can not only increase client participation in Extension programming and…

Playful User Interfaces. Interfaces that Invite Social and Physical Interaction.

NARCIS (Netherlands)

Nijholt, Antinus; Unknown, [Unknown

2014-01-01

This book is about user interfaces to applications that can be considered as ‘playful’. The interfaces to such applications should be ‘playful’ as well. The application should be fun, and interacting with such an application should, of course, be fun as well. Maybe more. Why not expect that the

Interfacing Sensors To Micro Controllers

KAUST Repository

Norain, Mohamed

2018-01-01

This lecture will cover the most common interface and interface techniques between sensors and microcontrollers. The presentation will introduce the pros and cons of each interface type including analogue, digital and serial output sensors. It will also cover the basic required electronics knowledge to help you in selecting and designing your next sensor to microcontroller interface.

Interfacing Sensors To Micro Controllers

KAUST Repository

Norain, Mohamed

2018-01-15

This lecture will cover the most common interface and interface techniques between sensors and microcontrollers. The presentation will introduce the pros and cons of each interface type including analogue, digital and serial output sensors. It will also cover the basic required electronics knowledge to help you in selecting and designing your next sensor to microcontroller interface.

Probabilities of Natural Events Occurring at Savannah River Plant

Energy Technology Data Exchange (ETDEWEB)

Huang, J.C.

2001-07-17

This report documents the comprehensive evaluation of probability models of natural events which are applicable to Savannah River Plant. The probability curves selected for these natural events are recommended to be used by all SRP/SRL safety analysts. This will ensure a consistency in analysis methodology for postulated SAR incidents involving natural phenomena.

Effects of interface pressure distribution on human sleep quality.

Directory of Open Access Journals (Sweden)

Zongyong Chen

Full Text Available High sleep quality promotes efficient performance in the following day. Sleep quality is influenced by environmental factors, such as temperature, light, sound and smell. Here, we investigated whether differences in the interface pressure distribution on healthy individuals during sleep influenced sleep quality. We defined four types of pressure models by differences in the area distribution and the subjective feelings that occurred when participants slept on the mattresses. One type of model was showed "over-concentrated" distribution of pressure; one was displayed "over-evenly" distributed interface pressure while the other two models were displayed intermediate distribution of pressure. A polysomnography analysis demonstrated an increase in duration and proportion of non-rapid-eye-movement sleep stages 3 and 4, as well as decreased number of micro-arousals, in subjects sleeping on models with pressure intermediately distributed compared to models with over-concentrated or over-even distribution of pressure. Similarly, higher scores of self-reported sleep quality were obtained in subjects sleeping on the two models with intermediate pressure distribution. Thus, pressure distribution, at least to some degree, influences sleep quality and self-reported feelings of sleep-related events, though the underlying mechanisms remain unknown. The regulation of pressure models imposed by external sleep environment may be a new direction for improving sleep quality. Only an appropriate interface pressure distribution is beneficial for improving sleep quality, over-concentrated or -even distribution of pressure do not help for good sleep.

Orders on file but no labs drawn: investigation of machine and human errors caused by an interface idiosyncrasy.

Science.gov (United States)

Schreiber, Richard; Sittig, Dean F; Ash, Joan; Wright, Adam

2017-09-01

In this report, we describe 2 instances in which expert use of an electronic health record (EHR) system interfaced to an external clinical laboratory information system led to unintended consequences wherein 2 patients failed to have laboratory tests drawn in a timely manner. In both events, user actions combined with the lack of an acknowledgment message describing the order cancellation from the external clinical system were the root causes. In 1 case, rapid, near-simultaneous order entry was the culprit; in the second, astute order management by a clinician, unaware of the lack of proper 2-way interface messaging from the external clinical system, led to the confusion. Although testing had shown that the laboratory system would cancel duplicate laboratory orders, it was thought that duplicate alerting in the new order entry system would prevent such events. © The Author 2017. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Activities of IAEA related to human interface in man-machine system

International Nuclear Information System (INIS)

Nishiwaki, Yasushi

1988-01-01

The present paper outlines some activities of IAEA related to human interface in man-machine systems. It has been recognized for quite some time that in large and complex man-machine interactive systems human errors can contribute substantially to failures of these systems, and that the improvement in the human interface in man-machine systems is essential for the safety of the plant. Many important surveys have been made in some member countries. These studies and operational experience have shown that it is possible to substantially reduce this adverse impact of human errors in nuclear power plant operations by the application of human factors technology. This technology. This technology includes: (1) selection of people with the requisite skills and knowledge and providing them with job-relevant training, (2) maintenance of the necessary job qualifications for each person in the plant, (3) design of man-machine interfaces which are fully compatible with the capabilities and limitations of the people in the system, and (4) design of job operations, including written materials, to facilitate required quality of human performance. A review is made of education/training, operator support systems, human error data collection, analysis of safety significant events and future activities. (Nogami, K.)

Verden som interface

DEFF Research Database (Denmark)

2007-01-01

Oversættelse af Peter Weibels tekst "The World as Interface" i Passepartout # 27. Interfacekulturens æstetik. Udgivelsesdato: 28.04.07......Oversættelse af Peter Weibels tekst "The World as Interface" i Passepartout # 27. Interfacekulturens æstetik. Udgivelsesdato: 28.04.07...

Ecological Interface Design

DEFF Research Database (Denmark)

Vicente, Kim J.; Rasmussen, Jens

1992-01-01

A theoretical framework for designing interfaces for complex human-machine systems is proposed. The framework, called ecological interface design (EID), is based on the skills, rules, knowledge taxonomy of cognitive control. The basic goal of EID is twofold: first, not to force processing...

Safeguards Summary Event List (SSEL), Pre-NRC through December 31, 1985

International Nuclear Information System (INIS)

1987-02-01

The Safeguards Summary Event List (SSEL) provides brief summaries of several hundred safeguards-related events involving nuclear material or facilities regulated by the US Nuclear Regulatory Commission (NRC). Events are described under the categories of bomb-related, intrusion, missing and/or allegedly stolen, transportation, tampering/vandalism, arson, firearms, radiological sabotage, non-radiological sabotage, and miscellaneous. The information contained in the event descriptions is derived primarily from official NRC reporting channels

Safeguards Summary Event List (SSEL): Pre-NRC through December 31, 1986

International Nuclear Information System (INIS)

1987-07-01

The Safeguards Summary Event List (SSEL) provides brief summaries of several hundred safeguards-related events involving nuclear material or facilities regulated by the US Nuclear Regulatory Commission (NRC). Events are described under the categories of bomb-related, intrusion, missing and/or allegedly stolen, transportation, tampering/vandalism, arson, firearms, radiological sabotage, nonradiological sabotage and miscellaneous. The information contained in the event descriptions is derived primarily from official NRC reporting channels

a model for quantity estimation for multi-coded team events

African Journals Online (AJOL)

Participation in multi-coded sports events often involves travel to international ... Medication use by Team south africa during the XXVIIIth olympiad: a model .... individual sports included in the programme (e.g. athletes involved in contact sports ...

Implementation and Performance of the Event Filter Muon Selection for the ATLAS experiment at LHC

CERN Document Server

Ventura, A; Assamagan, Ketevi A; Baines, J T M; Bee, C P; Bellomo, M; Biglietti, M; Bogaerts, J A C; Boisvert, V; Bosman, M; Carlino, G; Caron, B; Casado, M P; Cataldi, G; Cavalli, D; Cervetto, M; Comune, G; Conde-Muíño, P; Conventi, F; De Santo, A; De Seixas, J M; Díaz-Gómez, M; Di Mattia, A; Dos Anjos, A; Dosil, M; Ellis, Nick; Emeliyanov, D; Epp, B; Falciano, S; Farilla, A; George, S; Ghete, V M; González, S; Grothe, M; Kabana, S; Khomich, A; Kilvington, G; Konstantinidis, N P; Kootzw, A; Lowe, A; Luminari, L; Maeno, T; Masik, J; Meessen, C; Mello, A G; Merino, G; Moore, R; Morettini, P; Negri, A; Nikitin, N V; Nisati, A; Padilla, C; Panikashvili, N; Parodi, F; Pérez-Réale, V; Pinfold, J L; Pinto, P; Primavera, M; Qian, Z; Resconi, S; Rosati, S; Sánchez, C; Santamarina-Rios, C; Scannicchio, D A; Schiavi, C; Segura, E; Sivoklokov, S Yu; Soluk, R A; Stefanidis, E; Sushkov, S; Sutton, M; Tapprogge, Stefan; Thomas, E; Touchard, F; Venda-Pinto, B; Vercesi, V; Werner, P; 2004 IEEE Nuclear Science Symposium And Medical Imaging Conference

2005-01-01

The ATLAS Trigger system is composed of three levels: an initial hardware trigger level (LVL1) followed by two software-based stages (LVL2 trigger and Event Filter) included in the High Level Trigger (HLT) and implemented on processor farms. The LVL2 trigger starts from LVL1 information concerning pointers to restricted so-called Regions of Interest (ROI) and performs event selection by means of optimized algorithms. If the LVL2 is passed, the full event is built and sent to the Event Filter (EF) algorithms for further selection and classification. After that, events are finally collected and put into mass storage for subsequent physics analysis. Even if many differences arise in the requirements and in the interfaces between the two HLT stages, they have a coherent approach to event selection. Therefore, the design of a common core software framework has been implemented in order to allow the HLT architecture to be flexible to changes (background conditions, luminosity, description of the detector, etc.). Al...

A Novel Audiovisual Brain-Computer Interface and Its Application in Awareness Detection

Science.gov (United States)

Wang, Fei; He, Yanbin; Pan, Jiahui; Xie, Qiuyou; Yu, Ronghao; Zhang, Rui; Li, Yuanqing

2015-01-01

Currently, detecting awareness in patients with disorders of consciousness (DOC) is a challenging task, which is commonly addressed through behavioral observation scales such as the JFK Coma Recovery Scale-Revised. Brain-computer interfaces (BCIs) provide an alternative approach to detect awareness in patients with DOC. However, these patients have a much lower capability of using BCIs compared to healthy individuals. This study proposed a novel BCI using temporally, spatially, and semantically congruent audiovisual stimuli involving numbers (i.e., visual and spoken numbers). Subjects were instructed to selectively attend to the target stimuli cued by instruction. Ten healthy subjects first participated in the experiment to evaluate the system. The results indicated that the audiovisual BCI system outperformed auditory-only and visual-only systems. Through event-related potential analysis, we observed audiovisual integration effects for target stimuli, which enhanced the discriminability between brain responses for target and nontarget stimuli and thus improved the performance of the audiovisual BCI. This system was then applied to detect the awareness of seven DOC patients, five of whom exhibited command following as well as number recognition. Thus, this audiovisual BCI system may be used as a supportive bedside tool for awareness detection in patients with DOC. PMID:26123281

Interface magnons. Magnetic superstructure

International Nuclear Information System (INIS)

Djafari-Rouhani, B.; Dobrzynski, L.

1975-01-01

The localized magnons at an interface between two Heisenberg ferromagnets are studied with a simple model. The effect of the coupling at the interface on the existence condition for the localized modes, the dispersion laws and the possible occurrence of magnetic superstructures due to soft modes are investigated. Finally a comparison is made with the similar results obtained for interface phonons [fr

Mother-to-infant emotional involvement at birth.

Science.gov (United States)

Figueiredo, Bárbara; Costa, Raquel; Pacheco, Alexandra; Pais, Alvaro

2009-07-01

To study mother-to-infant emotional involvement at birth, namely factors (socio-demographics, previous life events, type of delivery, pain at childbirth, support from partner, infant characteristics, early experiences with the newborn, and mother's mood) that interfere with the mother's positive, negative and not clear emotions toward the newborn. The Bonding Scale (an extended Portuguese version of the 'New Mother-to-Infant Bonding Scale') and the Edinburgh Postnatal Depression Scale were administrated during the first after delivery days to 315 mothers recruited at Júlio Dinis Maternity Hospital (MJD, Porto, Portugal). A worse emotional involvement with the newborn was observed when the mother was unemployed, unmarried, had less than grade 9, previous obstetrical/psychological problems or was depressed, as well as when the infant was female, had neonatal problems or was admitted in the intensive care unit. Lower total bonding results were significantly predicted when the mother was depressed and had a lower educational level; being depressed, unemployed and single predicted more negative emotions toward the infant as well. No significant differences in the mother-to-infant emotional involvement were obtained for events related to childbirth, such as type of delivery, pain and partner support, or early experiences with the newborn; these events do not predict mother's bonding results either. The study results support the need for screening and supporting depressed, unemployed and single mothers, in order to prevent bonding difficulties with the newborn at birth.

Persistent Data Layout and Infrastructure for Efficient Selective Retrieval of Event Data in ATLAS

CERN Document Server

INSPIRE-00084279; Malon, David

2011-01-01

The ATLAS detector at CERN has completed its first full year of recording collisions at 7 TeV, resulting in billions of events and petabytes of data. At these scales, physicists must have the capability to read only the data of interest to their analyses, with the importance of efficient selective access increasing as data taking continues. ATLAS has developed a sophisticated event-level metadata infrastructure and supporting I/O framework allowing event selections by explicit specification, by back navigation, and by selection queries to a TAG database via an integrated web interface. These systems and their performance have been reported on elsewhere. The ultimate success of such a system, however, depends significantly upon the efficiency of selective event retrieval. Supporting such retrieval can be challenging, as ATLAS stores its event data in column-wise orientation using ROOT trees for a number of reasons, including compression considerations, histogramming use cases, and more. For 2011 data, ATLAS wi...

Adaptive user interfaces

CERN Document Server

1990-01-01

This book describes techniques for designing and building adaptive user interfaces developed in the large AID project undertaken by the contributors.Key Features* Describes one of the few large-scale adaptive interface projects in the world* Outlines the principles of adaptivity in human-computer interaction

Non uniform nature of recorded ground accelerations at dam foundation interface

Energy Technology Data Exchange (ETDEWEB)

Ghaemian, Mohsen; Gilani, Morteza Sohrabi [Sharif University of Technology, Tehran, (Iran, Islamic Republic of); Noorzad, Ali [Power and Water University of Technology, Tehran, (Iran, Islamic Republic of)

2010-07-01

The Karun III is a double curved concrete arch dam located in Iran which was used to investigate earthquake motions and dam responses. This paper presented the study of the Karun III dam foundation interface. Using an array of 15 accelerometers, two major events that occurred on 2007.11.20 and 2007.11.21 were recorded during dam operation with a PGA at crest of 0.312 g and 0.109.g respectively. A finite element model of Karun III dam was performed. The response of the Karun III dam during the 2007 earthquake was investigated using the NSAD-DRI program. It was found that the motion of the dam foundation interface is non-uniform. There is a time shift and amplification at the abutment compared to those at the base of the dam. The results showed that the spatially varying earthquake assumption is in good agreement with the recorded displacement of the dam.

Importance of individual events in temporal networks

International Nuclear Information System (INIS)

Takaguchi, Taro; Masuda, Naoki; Sato, Nobuo; Yano, Kazuo

2012-01-01

Records of time-stamped social interactions between pairs of individuals (e.g. face-to-face conversations, e-mail exchanges and phone calls) constitute a so-called temporal network. A remarkable difference between temporal networks and conventional static networks is that time-stamped events rather than links are the unit elements generating the collective behavior of nodes. We propose an importance measure for single interaction events. By generalizing the concept of the advance of events proposed by Kossinets et al (2008 Proc. 14th ACM SIGKDD Int. Conf. on Knowledge Discovery and Data Mining p 435), we propose that an event is central when it carries new information about others to the two nodes involved in the event. We find that the proposed measure properly quantifies the importance of events in connecting nodes along time-ordered paths. Because of strong heterogeneity in the importance of events present in real data, a small fraction of highly important events is necessary and sufficient to sustain the connectivity of temporal networks. Nevertheless, in contrast to the behavior of scale-free networks against link removal, this property mainly results from bursty activity patterns and not heterogeneous degree distributions. (paper)

Transport processes at fluidic interfaces

CERN Document Server

Reusken, Arnold

2017-01-01

There are several physico-chemical processes that determine the behavior of multiphase fluid systems – e.g., the fluid dynamics in the different phases and the dynamics of the interface(s), mass transport between the fluids, adsorption effects at the interface, and transport of surfactants on the interface – and result in heterogeneous interface properties. In general, these processes are strongly coupled and local properties of the interface play a crucial role. A thorough understanding of the behavior of such complex flow problems must be based on physically sound mathematical models, which especially account for the local processes at the interface. This book presents recent findings on the rigorous derivation and mathematical analysis of such models and on the development of numerical methods for direct numerical simulations. Validation results are based on specifically designed experiments using high-resolution experimental techniques. A special feature of this book is its focus on an interdisciplina...

Nanoparticle Assemblies at Fluid Interfaces

Energy Technology Data Exchange (ETDEWEB)

Russell, Thomas P. [Univ. of Massachusetts, Amherst, MA (United States). Dept. of Polymer Science and Engineering

2015-03-10

A systematic study of the structure and dynamics of nanoparticles (NP) and NP-surfactants was performed. The ligands attached to both the NPs and NP-surfactants dictate the manner in which the nanoscopic materials assemble at fluid interfaces. Studies have shown that a single layer of the nanoscpic materials form at the interface to reduce the interactions between the two immiscible fluids. The shape of the NP is, also, important, where for spherical particles, a disordered, liquid-like monolayer forms, and, for nanorods, ordered domains at the interface is found and, if the monolayers are compressed, the orientation of the nanorods with respect to the interface can change. By associating end-functionalized polymers to the NPs assembled at the interface, NP-surfactants are formed that increase the energetic gain in segregating each NP at the interface which allows the NP-surfactants to jam at the interface when compressed. This has opened the possibility of structuring the two liquids by freezing in shape changes of the liquids.

ACPYPE - AnteChamber PYthon Parser interfacE.

Science.gov (United States)

Sousa da Silva, Alan W; Vranken, Wim F

2012-07-23

ACPYPE (or AnteChamber PYthon Parser interfacE) is a wrapper script around the ANTECHAMBER software that simplifies the generation of small molecule topologies and parameters for a variety of molecular dynamics programmes like GROMACS, CHARMM and CNS. It is written in the Python programming language and was developed as a tool for interfacing with other Python based applications such as the CCPN software suite (for NMR data analysis) and ARIA (for structure calculations from NMR data). ACPYPE is open source code, under GNU GPL v3, and is available as a stand-alone application at http://www.ccpn.ac.uk/acpype and as a web portal application at http://webapps.ccpn.ac.uk/acpype. We verified the topologies generated by ACPYPE in three ways: by comparing with default AMBER topologies for standard amino acids; by generating and verifying topologies for a large set of ligands from the PDB; and by recalculating the structures for 5 protein-ligand complexes from the PDB. ACPYPE is a tool that simplifies the automatic generation of topology and parameters in different formats for different molecular mechanics programmes, including calculation of partial charges, while being object oriented for integration with other applications.

Software and man-machine interface considerations for a nuclear plant computer replacement and upgrade project

International Nuclear Information System (INIS)

Diamond, G.; Robinson, E.

1984-01-01

Some of the key software functions and Man-Machine Interface considerations in a computer replacement and upgrade project for a nuclear power plant are described. The project involves the installation of two separate computer systems: an Emergency Response Facilities Computer System (ERFCS) and a Plant Process Computer System (PPCS). These systems employ state-of-the-art computer hardware and software. The ERFCS is a new system intended to provide enhanced functions to meet NRC post-TMI guidelines. The PPCS is intended to replace and upgrade an existing obsolete plant computer system. A general overview of the hardware and software aspects of the replacement and upgrade is presented. The work done to develop the upgraded Man-Machine Interface is described. For the ERFCS, a detailed discussion is presented of the work done to develop logic to evaluate the readiness and performance of safety systems and their supporting functions. The Man-Machine Interface considerations of reporting readiness and performance to the operator are discussed. Finally, the considerations involved in the implementation of this logic in real-time software are discussed.. For the PPCS, a detailed discussion is presented of some new features

High temperature interface superconductivity

International Nuclear Information System (INIS)

Gozar, A.; Bozovic, I.

2016-01-01

Highlight: • This review article covers the topic of high temperature interface superconductivity. • New materials and techniques used for achieving interface superconductivity are discussed. • We emphasize the role played by the differences in structure and electronic properties at the interface with respect to the bulk of the constituents. - Abstract: High-T_c superconductivity at interfaces has a history of more than a couple of decades. In this review we focus our attention on copper-oxide based heterostructures and multi-layers. We first discuss the technique, atomic layer-by-layer molecular beam epitaxy (ALL-MBE) engineering, that enabled High-T_c Interface Superconductivity (HT-IS), and the challenges associated with the realization of high quality interfaces. Then we turn our attention to the experiments which shed light on the structure and properties of interfacial layers, allowing comparison to those of single-phase films and bulk crystals. Both ‘passive’ hetero-structures as well as surface-induced effects by external gating are discussed. We conclude by comparing HT-IS in cuprates and in other classes of materials, especially Fe-based superconductors, and by examining the grand challenges currently laying ahead for the field.

Root cause analysis of critical events in neurosurgery, New South Wales.

Science.gov (United States)

Perotti, Vanessa; Sheridan, Mark M P

2015-09-01

Adverse events reportedly occur in 5% to 10% of health care episodes. Not all adverse events are the result of error; they may arise from systemic faults in the delivery of health care. Catastrophic events are not only physically devastating to patients, but they also attract medical liability and increase health care costs. Root cause analysis (RCA) has become a key tool for health care services to understand those adverse events. This study is a review of all the RCA case reports involving neurosurgical patients in New South Wales between 2008 and 2013. The case reports and data were obtained from the Clinical Excellence Commission database. The data was then categorized by the root causes identified and the recommendations suggested by the RCA committees. Thirty-two case reports were identified in the RCA database. Breaches in policy account for the majority of root causes identified, for example, delays in transfer of patients or wrong-site surgery, which always involved poor adherence to correct patient and site identification procedures. The RCA committees' recommendations included education for staff, and improvements in rostering and procedural guidelines. RCAs have improved the patient safety profile; however, the RCA committees have no power to enforce any recommendation or ensure compliance. A single RCA may provide little learning beyond the unit and staff involved. However, through aggregation of RCA data and dissemination strategies, health care workers can learn from adverse events and prevent future events from occurring. © 2015 Royal Australasian College of Surgeons.

Scalable coherent interface

International Nuclear Information System (INIS)

Alnaes, K.; Kristiansen, E.H.; Gustavson, D.B.; James, D.V.

1990-01-01

The Scalable Coherent Interface (IEEE P1596) is establishing an interface standard for very high performance multiprocessors, supporting a cache-coherent-memory model scalable to systems with up to 64K nodes. This Scalable Coherent Interface (SCI) will supply a peak bandwidth per node of 1 GigaByte/second. The SCI standard should facilitate assembly of processor, memory, I/O and bus bridge cards from multiple vendors into massively parallel systems with throughput far above what is possible today. The SCI standard encompasses two levels of interface, a physical level and a logical level. The physical level specifies electrical, mechanical and thermal characteristics of connectors and cards that meet the standard. The logical level describes the address space, data transfer protocols, cache coherence mechanisms, synchronization primitives and error recovery. In this paper we address logical level issues such as packet formats, packet transmission, transaction handshake, flow control, and cache coherence. 11 refs., 10 figs

Surface and interface sciences of Li-ion batteries. -Research progress in electrode-electrolyte interface-

Science.gov (United States)

Minato, Taketoshi; Abe, Takeshi

2017-12-01

The application potential of Li-ion batteries is growing as demand increases in different fields at various stages in energy systems, in addition to their conventional role as power sources for portable devices. In particular, applications in electric vehicles and renewable energy storage are increasing for Li-ion batteries. For these applications, improvements in battery performance are necessary. The Li-ion battery produces and stores electric power from the electrochemical redox reactions between the electrode materials. The interface between the electrodes and electrolyte strongly affects the battery performance because the charge transfer causing the electrode redox reaction begins at this interface. Understanding of the surface structure, electronic structure, and chemical reactions at the electrode-electrolyte interface is necessary to improve battery performance. However, the interface is located between the electrode and electrolyte materials, hindering the experimental analysis of the interface; thus, the physical properties and chemical processes have remained poorly understood until recently. Investigations of the physical properties and chemical processes at the interface have been performed using advanced surface science techniques. In this review, current knowledge and future research prospects regarding the electrode-electrolyte interface are described for the further development of Li-ion batteries.

The Run 2 ATLAS Analysis Event Data Model

CERN Document Server

SNYDER, S; The ATLAS collaboration; NOWAK, M; EIFERT, T; BUCKLEY, A; ELSING, M; GILLBERG, D; MOYSE, E; KOENEKE, K; KRASZNAHORKAY, A

2014-01-01

During the LHC's first Long Shutdown (LS1) ATLAS set out to establish a new analysis model, based on the experience gained during Run 1. A key component of this is a new Event Data Model (EDM), called the xAOD. This format, which is now in production, provides the following features: A separation of the EDM into interface classes that the user code directly interacts with, and data storage classes that hold the payload data. The user sees an Array of Structs (AoS) interface, while the data is stored in a Struct of Arrays (SoA) format in memory, thus making it possible to efficiently auto-vectorise reconstruction code. A simple way of augmenting and reducing the information saved for different data objects. This makes it possible to easily decorate objects with new properties during data analysis, and to remove properties that the analysis does not need. A persistent file format that can be explored directly with ROOT, either with or without loading any additional libraries. This allows fast interactive naviga...

Safeguards summary event list (SSEL): Pre-NRC through December 31, 1987

International Nuclear Information System (INIS)

1988-07-01

The Safeguards Summary Event List (SSEL) provides brief summaries of several hundred safeguards-related events involving nuclear material or facilities regulated by the US Nuclear Regulatory Commission (NRC). Events are described under the categories of bomb-related, intrusion, missing and/or allegedly stolen, transportation, tampering/vandalism, arson, firearms, radiological sabotage, nonradiological sabotage, alcohol and drugs, and miscellaneous. The information contained in the event descriptions is derived primarily from official NRC reporting channels

Event-Based Control Strategy for Mobile Robots in Wireless Environments.

Science.gov (United States)

Socas, Rafael; Dormido, Sebastián; Dormido, Raquel; Fabregas, Ernesto

2015-12-02

In this paper, a new event-based control strategy for mobile robots is presented. It has been designed to work in wireless environments where a centralized controller has to interchange information with the robots over an RF (radio frequency) interface. The event-based architectures have been developed for differential wheeled robots, although they can be applied to other kinds of robots in a simple way. The solution has been checked over classical navigation algorithms, like wall following and obstacle avoidance, using scenarios with a unique or multiple robots. A comparison between the proposed architectures and the classical discrete-time strategy is also carried out. The experimental results shows that the proposed solution has a higher efficiency in communication resource usage than the classical discrete-time strategy with the same accuracy.

More playful user interfaces: interfaces that invite social and physical interaction

NARCIS (Netherlands)

Nijholt, Antinus; Unknown, [Unknown

2015-01-01

This book covers the latest advances in playful user interfaces – interfaces that invite social and physical interaction. These new developments include the use of audio, visual, tactile and physiological sensors to monitor, provide feedback and anticipate the behavior of human users. The decreasing

Fuel element thermo-mechanical analysis during transient events using the FMS and FETMA codes

International Nuclear Information System (INIS)

Hernandez Lopez Hector; Hernandez Martinez Jose Luis; Ortiz Villafuerte Javier

2005-01-01

In the Instituto Nacional de Investigaciones Nucleares of Mexico, the Fuel Management System (FMS) software package has been used for long time to simulate the operation of a BWR nuclear power plant in steady state, as well as in transient events. To evaluate the fuel element thermo-mechanical performance during transient events, an interface between the FMS codes and our own Fuel Element Thermo Mechanical Analysis (FETMA) code is currently being developed and implemented. In this work, the results of the thermo-mechanical behavior of fuel rods in the hot channel during the simulation of transient events of a BWR nuclear power plant are shown. The transient events considered for this work are a load rejection and a feedwater control failure, which among the most important events that can occur in a BWR. The results showed that conditions leading to fuel rod failure at no time appeared for both events. Also, it is shown that a transient due load rejection is more demanding on terms of safety that the failure of a controller of the feedwater. (authors)

A hybrid three-class brain-computer interface system utilizing SSSEPs and transient ERPs

Science.gov (United States)

Breitwieser, Christian; Pokorny, Christoph; Müller-Putz, Gernot R.

2016-12-01

Objective. This paper investigates the fusion of steady-state somatosensory evoked potentials (SSSEPs) and transient event-related potentials (tERPs), evoked through tactile simulation on the left and right-hand fingertips, in a three-class EEG based hybrid brain-computer interface. It was hypothesized, that fusing the input signals leads to higher classification rates than classifying tERP and SSSEP individually. Approach. Fourteen subjects participated in the studies, consisting of a screening paradigm to determine person dependent resonance-like frequencies and a subsequent online paradigm. The whole setup of the BCI system was based on open interfaces, following suggestions for a common implementation platform. During the online experiment, subjects were instructed to focus their attention on the stimulated fingertips as indicated by a visual cue. The recorded data were classified during runtime using a multi-class shrinkage LDA classifier and the outputs were fused together applying a posterior probability based fusion. Data were further analyzed offline, involving a combined classification of SSSEP and tERP features as a second fusion principle. The final results were tested for statistical significance applying a repeated measures ANOVA. Main results. A significant classification increase was achieved when fusing the results with a combined classification compared to performing an individual classification. Furthermore, the SSSEP classifier was significantly better in detecting a non-control state, whereas the tERP classifier was significantly better in detecting control states. Subjects who had a higher relative band power increase during the screening session also achieved significantly higher classification results than subjects with lower relative band power increase. Significance. It could be shown that utilizing SSSEP and tERP for hBCIs increases the classification accuracy and also that tERP and SSSEP are not classifying control- and non

Observation of carbon growth and interface structures in methanol solution

Science.gov (United States)

Okuno, Kimio

2015-11-01

In the deposition of carbon on the surface of a tungsten tip in methanol solution by electrolysis, the growth structure of the carbon films, the interface state, and the dissolution of carbon atoms into the tungsten matrix of the substrate have been investigated with the atomic events by field ion microscopy (FIM). The carbon films preferentially condense on the W{111} plane. The interfacial reaction at the carbon atom-tungsten substrate interface is vigorous and the carbon atoms also readily dissolve into the substrate matrix to form a tungsten-carbon complex. The reaction depth of the deposited carbon depends on the magnitude of electrolytic current and the treatment duration in the methanol solution. In this work, the resolution depth of carbon was found to be approximately 270 atomic layers below the top layer of the tungsten substrate by a field evaporation technique. In the case of a low electrolytic current, the tungsten substrate surface is entirely covered with carbon atoms having a pseudomorphic structure. The field-electron emission characteristics were also evaluated for various coverages of the carbon film formed on the substrate.

Evaluation and simulation of event building techniques for a detector at the LHC

CERN Document Server

Spiwoks, R

1995-01-01

The main objectives of future experiments at the Large Hadron Collider are the search for the Higgs boson (or bosons), the verification of the Standard Model and the search beyond the Standard Model in a new energy range up to a few TeV. These experiments will have to cope with unprecedented high data rates and will need event building systems which can offer a bandwidth of 1 to 100GB/s and which can assemble events from 100 to 1000 readout memories at rates of 1 to 100kHz. This work investigates the feasibility of parallel event building sys- tems using commercially available high speed interconnects and switches. Studies are performed by building a small-scale prototype and by modelling this proto- type and realistic architectures with discrete-event simulations. The prototype is based on the HiPPI standard and uses commercially available VME-HiPPI interfaces and a HiPPI switch together with modular and scalable software. The setup operates successfully as a parallel event building system of limited size in...

Robotic devices and brain-machine interfaces for hand rehabilitation post-stroke.

Science.gov (United States)

McConnell, Alistair C; Moioli, Renan C; Brasil, Fabricio L; Vallejo, Marta; Corne, David W; Vargas, Patricia A; Stokes, Adam A

2017-06-28

To review the state of the art of robotic-aided hand physiotherapy for post-stroke rehabilitation, including the use of brain-machine interfaces. Each patient has a unique clinical history and, in response to personalized treatment needs, research into individualized and at-home treatment options has expanded rapidly in recent years. This has resulted in the development of many devices and design strategies for use in stroke rehabilitation. The development progression of robotic-aided hand physiotherapy devices and brain-machine interface systems is outlined, focussing on those with mechanisms and control strategies designed to improve recovery outcomes of the hand post-stroke. A total of 110 commercial and non-commercial hand and wrist devices, spanning the 2 major core designs: end-effector and exoskeleton are reviewed. The growing body of evidence on the efficacy and relevance of incorporating brain-machine interfaces in stroke rehabilitation is summarized. The challenges involved in integrating robotic rehabilitation into the healthcare system are discussed. This review provides novel insights into the use of robotics in physiotherapy practice, and may help system designers to develop new devices.

Safeguards Summary Event List (SSEL), pre-NRC through December 31, 1982

International Nuclear Information System (INIS)

1983-08-01

This document represents a revision of the list published December 1980 of safeguards-related events involving NRC licensees and licensed material. It summarizes events occurring between June 30, 1982 and December 31, 1982. Editorial changes to earlier pages are also included

Stress Transfer Processes during Great Plate Boundary Thrusting Events: A Study from the Andaman and Nicobar Segments

Science.gov (United States)

Andrade, V.; Rajendran, K.

2010-12-01

The response of subduction zones to large earthquakes varies along their strike, both during the interseismic and post-seismic periods. The December 26, 2004 earthquake nucleated at 3° N latitude and its rupture propagated northward, along the Andaman-Sumatra subduction zone, terminating at 15°N. Rupture speed was estimated at about 2.0 km per second in the northern part under the Andaman region and 2.5 - 2.7 km per second under southern Nicobar and North Sumatra. We have examined the pre and post-2004 seismicity to understand the stress transfer processes within the subducting plate, in the Andaman (10° - 15° N ) and Nicobar (5° - 10° N) segments. The seismicity pattern in these segments shows distinctive characteristics associated with the outer rise, accretionary prism and the spreading ridge, all of which are relatively better developed in the Andaman segment. The Ninety East ridge and the Sumatra Fault System are significant tectonic features in the Nicobar segment. The pre-2004 seismicity in both these segments conform to the steady-state conditions wherein large earthquakes are fewer and compressive stresses dominate along the plate interface. Among the pre-2004 great earthquakes are the 1881 Nicobar and 1941 Andaman events. The former is considered to be a shallow thrust event that generated a small tsunami. Studies in other subduction zones suggest that large outer-rise tensional events follow great plate boundary breaking earthquakes due to the the up-dip transfer of stresses within the subducting plate. The seismicity of the Andaman segment (1977-2004) concurs with the steady-state stress conditions where earthquakes occur dominantly by thrust faulting. The post-2004 seismicity shows up-dip migration along the plate interface, with dominance of shallow normal faulting, including a few outer rise events and some deeper (> 100 km) strike-slip faulting events within the subducting plate. The September 13, 2002, Mw 6.5 thrust faulting earthquake at

UNIVERSAL INTERFACE TO MULTIPLE OPERATIONS SYSTEMS

DEFF Research Database (Denmark)

Sonnenwald, Diane H.

1986-01-01

Alternative ways to provide access to operations systems that maintain, test, and configure complex telephone networks are being explored. It is suggested that a universal interface that provides simultaneous access to multiple operations systems that execute in different hardware and software...... environments, can be provided by an architecture that is based on the separation of presentation issues from application issues and on a modular interface management system that consists of a virtual user interface, physical user interface, and interface agent. The interface functionality that is needed...

Comparing two types of navigational interfaces for Virtual Reality.

Science.gov (United States)

Teixeira, Luís; Vilar, Elisângela; Duarte, Emília; Rebelo, Francisco; da Silva, Fernando Moreira

2012-01-01

Previous studies suggest significant differences between navigating virtual environments in a life-like walking manner (i.e., using treadmills or walk-in-place techniques) and virtual navigation (i.e., flying while really standing). The latter option, which usually involves hand-centric devices (e.g., joysticks), is the most common in Virtual Reality-based studies, mostly due to low costs, less space and technology demands. However, recently, new interaction devices, originally conceived for videogames have become available offering interesting potentialities for research. This study aimed to explore the potentialities of the Nintendo Wii Balance Board as a navigation interface in a Virtual Environment presented in an immersive Virtual Reality system. Comparing participants' performance while engaged in a simulated emergency egress allows determining the adequacy of such alternative navigation interface on the basis of empirical results. Forty university students participated in this study. Results show that participants were more efficient when performing navigation tasks using the Joystick than with the Balance Board. However there were no significantly differences in the behavioral compliance with exit signs. Therefore, this study suggests that, at least for tasks similar to the studied, the Balance Board have good potentiality to be used as a navigation interface for Virtual Reality systems.

Engineering magnetism at functional oxides interfaces: manganites and beyond.

Science.gov (United States)

Yi, Di; Lu, Nianpeng; Chen, Xuegang; Shen, Shengchun; Yu, Pu

2017-11-08

The family of transition metal oxides (TMOs) is a large class of magnetic materials that has been intensively studied due to the rich physics involved as well as the promising potential applications in next generation electronic devices. In TMOs, the spin, charge, orbital and lattice are strongly coupled, and significant advances have been achieved to engineer the magnetism by different routes that manipulate these degrees of freedom. The family of manganites is a model system of strongly correlated magnetic TMOs. In this review, using manganites thin films and the heterostructures in conjunction with other TMOs as model systems, we review the recent progress of engineering magnetism in TMOs. We first discuss the role of the lattice that includes the epitaxial strain and the interface structural coupling. Then we look into the role of charge, focusing on the interface charge modulation. Having demonstrated the static effects, we continue to review the research on dynamical control of magnetism by electric field. Next, we review recent advances in heterostructures comprised of high T c cuprate superconductors and manganites. Following that, we discuss the emergent magnetic phenomena at interfaces between 3d TMOs and 5d TMOs with strong spin-orbit coupling. Finally, we provide our outlook for prospective future directions.

A distributed, graphical user interface based, computer control system for atomic physics experiments.

Science.gov (United States)

Keshet, Aviv; Ketterle, Wolfgang

2013-01-01

Atomic physics experiments often require a complex sequence of precisely timed computer controlled events. This paper describes a distributed graphical user interface-based control system designed with such experiments in mind, which makes use of off-the-shelf output hardware from National Instruments. The software makes use of a client-server separation between a user interface for sequence design and a set of output hardware servers. Output hardware servers are designed to use standard National Instruments output cards, but the client-server nature should allow this to be extended to other output hardware. Output sequences running on multiple servers and output cards can be synchronized using a shared clock. By using a field programmable gate array-generated variable frequency clock, redundant buffers can be dramatically shortened, and a time resolution of 100 ns achieved over effectively arbitrary sequence lengths.

A distributed, graphical user interface based, computer control system for atomic physics experiments

Science.gov (United States)

Keshet, Aviv; Ketterle, Wolfgang

2013-01-01

Atomic physics experiments often require a complex sequence of precisely timed computer controlled events. This paper describes a distributed graphical user interface-based control system designed with such experiments in mind, which makes use of off-the-shelf output hardware from National Instruments. The software makes use of a client-server separation between a user interface for sequence design and a set of output hardware servers. Output hardware servers are designed to use standard National Instruments output cards, but the client-server nature should allow this to be extended to other output hardware. Output sequences running on multiple servers and output cards can be synchronized using a shared clock. By using a field programmable gate array-generated variable frequency clock, redundant buffers can be dramatically shortened, and a time resolution of 100 ns achieved over effectively arbitrary sequence lengths.

Zn(2+) site engineering at the oligomeric interface of the dopamine transporter.

Science.gov (United States)

Norgaard-Nielsen, Kristine; Norregaard, Lene; Hastrup, Hanne; Javitch, Jonathan A; Gether, Ulrik

2002-07-31

Increasing evidence suggests that Na(+)/Cl(-)-dependent neurotransmitter transporters exist as homo-oligomeric proteins. However, the functional implication of this oligomerization remains unclear. Here we demonstrate the engineering of a Zn(2+) binding site at the predicted dimeric interface of the dopamine transporter (DAT) corresponding to the external end of transmembrane segment 6. Upon binding to this site, which involves a histidine inserted in position 310 (V310H) and the endogenous Cys306 within the same DAT molecule, Zn(2+) potently inhibits [(3)H]dopamine uptake. These data provide indirect evidence that conformational changes critical for the translocation process may occur at the interface between two transporter molecules in the oligomeric structure.

Imaging chemical interfaces perpendicular to the optical axis with focus-engineered coherent anti-Stokes Raman scattering microscopy

International Nuclear Information System (INIS)

Krishnamachari, Vishnu Vardhan; Potma, Eric Olaf

2007-01-01

In vibrational microscopy, it is often necessary to distinguish between chemically distinct microscopic objects and to highlight the 'chemical interfaces' present in the sample under investigation. Here we apply the concept of focus engineering to enhance the sensitivity of coherent anti-Stokes Raman scattering (CARS) microscopy to these interfaces. Based on detailed numerical simulations, we show that using a focused Stokes field with a sharp phase jump along the longitudinal direction leads to the suppression of the signal from bulk regions and improves the signal contrast from vibrational resonant interfaces oriented perpendicular to the axis of beam propagation. We also demonstrate that the CARS spectral response from chemical interfaces exhibits a clean, Raman-like band-shape with such a phase-shaped excitation. This phenomenon of interface highlighting is a consequence of the coherent nature of CARS signal generation and it involves a complex interplay of the spectral phase of the sample and the spatial phase of the excitation fields

EVENT GENERATOR FOR RHIC SPIN PHYSICS

International Nuclear Information System (INIS)

SAITO, N.; SCHAEFER, A.

1999-01-01

This volume archives the reports from the RIKEN BNL Research Center workshop on ''Event Generator for RHIC Spin Physics II'' held during the week March 15, 1999 at Brookhaven National Laboratory. It was the second meeting on the subject following a first one in last September. This workshop has been initiated to establish a firm collaboration between theorists and experimentalists involved in RHIC spin physics with the aim of developing a reliable, high-precision event generator for RHIC spin physics. Needless to say, adequate event generators are indispensable tools for high energy physics programs in general, especially in the process of: planning the experimental programs; developing algorithms to extract the physics signals of interest; estimating the background in the extracted results, and connecting the final particle kinematics to the fundamental i.e. partonic level processes. Since RHIC is the first polarized collider, dedicated efforts are required to obtain a full-fledged event generator which describes spin dependent reactions in great detail

NPP unusual events: data, analysis and application

International Nuclear Information System (INIS)

Tolstykh, V.

1990-01-01

Subject of the paper are the IAEA cooperative patterns of unusual events data treatment and utilization of the operating safety experience feedback. The Incident Reporting System (IRS) and the Analysis of Safety Significant Event Team (ASSET) are discussed. The IRS methodology in collection, handling, assessment and dissemination of data on NPP unusual events (deviations, incidents and accidents) occurring during operations, surveillance and maintenance is outlined by the reports gathering and issuing practice, the experts assessment procedures and the parameters of the system. After 7 years of existence the IAEA-IRS contains over 1000 reports and receives 1.5-4% of the total information on unusual events. The author considers the reports only as detailed technical 'records' of events requiring assessment. The ASSET approaches implying an in-depth occurrences analysis directed towards level-1 PSA utilization are commented on. The experts evaluated root causes for the reported events and some trends are presented. Generally, internal events due to unexpected paths of water in the nuclear installations, occurrences related to the integrity of the primary heat transport systems, events associated with the engineered safety systems and events involving human factor represent the large groups deserving close attention. Personal recommendations on how to use the events related information use for NPP safety improvement are given. 2 tabs (R.Ts)

P300 brain computer interface: current challenges and emerging trends

Science.gov (United States)

Fazel-Rezai, Reza; Allison, Brendan Z.; Guger, Christoph; Sellers, Eric W.; Kleih, Sonja C.; Kübler, Andrea

2012-01-01

A brain-computer interface (BCI) enables communication without movement based on brain signals measured with electroencephalography (EEG). BCIs usually rely on one of three types of signals: the P300 and other components of the event-related potential (ERP), steady state visual evoked potential (SSVEP), or event related desynchronization (ERD). Although P300 BCIs were introduced over twenty years ago, the past few years have seen a strong increase in P300 BCI research. This closed-loop BCI approach relies on the P300 and other components of the ERP, based on an oddball paradigm presented to the subject. In this paper, we overview the current status of P300 BCI technology, and then discuss new directions: paradigms for eliciting P300s; signal processing methods; applications; and hybrid BCIs. We conclude that P300 BCIs are quite promising, as several emerging directions have not yet been fully explored and could lead to improvements in bit rate, reliability, usability, and flexibility. PMID:22822397

Early molecular events involved in Pinus pinaster Ait. somatic embryo development under reduced water availability: transcriptomic and proteomic analyses.

Science.gov (United States)

Morel, Alexandre; Teyssier, Caroline; Trontin, Jean-François; Eliášová, Kateřina; Pešek, Bedřich; Beaufour, Martine; Morabito, Domenico; Boizot, Nathalie; Le Metté, Claire; Belal-Bessai, Leila; Reymond, Isabelle; Harvengt, Luc; Cadene, Martine; Corbineau, Françoise; Vágner, Martin; Label, Philippe; Lelu-Walter, Marie-Anne

2014-09-01

Maritime pine somatic embryos (SEs) require a reduction in water availability (high gellan gum concentration in the maturation medium) to reach the cotyledonary stage. This key switch, reported specifically for pine species, is not yet well understood. To facilitate the use of somatic embryogenesis for mass propagation of conifers, we need a better understanding of embryo development. Comparison of both transcriptome (Illumina RNA sequencing) and proteome [two-dimensional sodium dodecyl sulfate-polyacrylamide gel electrophoresis with mass spectrometry (MS) identification] of immature SEs, cultured on either high (9G) or low (4G) gellan gum concentration, was performed, together with analysis of water content, fresh and dry mass, endogenous abscisic acid (ABA; gas chromatography-MS), soluble sugars (high-pressure liquid chromatography), starch and confocal laser microscope observations. This multiscale, integrated analysis was used to unravel early molecular and physiological events involved in SE development. Under unfavorable conditions (4G), the glycolytic pathway was enhanced, possibly in relation to cell proliferation that may be antagonistic to SE development. Under favorable conditions (9G), SEs adapted to culture constraint by activating specific protective pathways, and ABA-mediated molecular and physiological responses promoting embryo development. Our results suggest that on 9G, germin-like protein and ubiquitin-protein ligase could be used as predictive markers of SE development, whereas protein phosphatase 2C could be a biomarker for culture adaptive responses. This is the first characterization of early molecular mechanisms involved in the development of pine SEs following an increase in gellan gum concentration in the maturation medium, and it is also the first report on somatic embryogenesis in conifers combining transcriptomic and proteomic datasets. © 2014 Scandinavian Plant Physiology Society.

Identification of interfaces involved in weak interactions with application to F-actin-aldolase rafts.

Science.gov (United States)

Hu, Guiqing; Taylor, Dianne W; Liu, Jun; Taylor, Kenneth A

2018-03-01

Macromolecular interactions occur with widely varying affinities. Strong interactions form well defined interfaces but weak interactions are more dynamic and variable. Weak interactions can collectively lead to large structures such as microvilli via cooperativity and are often the precursors of much stronger interactions, e.g. the initial actin-myosin interaction during muscle contraction. Electron tomography combined with subvolume alignment and classification is an ideal method for the study of weak interactions because a 3-D image is obtained for the individual interactions, which subsequently are characterized collectively. Here we describe a method to characterize heterogeneous F-actin-aldolase interactions in 2-D rafts using electron tomography. By forming separate averages of the two constituents and fitting an atomic structure to each average, together with the alignment information which relates the raw motif to the average, an atomic model of each crosslink is determined and a frequency map of contact residues is computed. The approach should be applicable to any large structure composed of constituents that interact weakly and heterogeneously. Copyright © 2017 Elsevier Inc. All rights reserved.

Discrete-event simulation of coordinated multi-point joint transmission in LTE-Advanced with constrained backhaul

DEFF Research Database (Denmark)

Artuso, Matteo; Christiansen, Henrik Lehrmann

2014-01-01

Inter-cell interference in LTE-Advanced can be mitigated using coordinated multi-point (CoMP) techniques with joint transmission of user data . However, this requires tight coordination of the eNodeBs, usin g the X2 interface. In this paper we use discrete-event simulation to evaluate the latency...... requirements for the X2 interface and investigate the consequences of a constrained ba ckhaul. Our simulation results show a gain of the system throug hput of up to 120% compared to the case without CoMP for low-latency backhaul. With X2 latencies above 5 ms CoMP is no longer a benefit to the network....

Bermuda Triangle: a subsystem of the 168/E interfacing scheme used by Group B at SLAC

International Nuclear Information System (INIS)

Oxoby, G.J.; Levinson, L.J.; Trang, Q.H.

1979-12-01

The Bermuda Triangle system is a method of interfacing several 168/E microprocessors to a central system for control of the processors and overlaying their memories. The system is a three-way interface with I/O ports to a large buffer memory, a PDP11 Unibus and a bus to the 168/E processors. Data may be transferred bidirectionally between any two ports. Two Bermuda Triangles are used, one for the program memory and one for the data memory. The program buffer memory stores the overlay programs for the 168/E, and the data buffer memory, the incoming raw data, the data portion of the overlays, and the outgoing processed events. This buffering is necessary since the memories of 168/E microprocessors are small compared to the main program and the amount of data being processed. The link to the computer facility is via a Unibus to IBM channel interface. A PDP11/04 controls the data flow. 7 figures, 4 tables

Stepwise approach to establishing multiple outreach laboratory information system-electronic medical record interfaces.

Science.gov (United States)

Pantanowitz, Liron; Labranche, Wayne; Lareau, William