Spectral Distortion in Lossy Compression of Hyperspectral Data

Directory of Open Access Journals (Sweden)

Bruno Aiazzi

2012-01-01

Full Text Available Distortion allocation varying with wavelength in lossy compression of hyperspectral imagery is investigated, with the aim of minimizing the spectral distortion between original and decompressed data. The absolute angular error, or spectral angle mapper (SAM, is used to quantify spectral distortion, while radiometric distortions are measured by maximum absolute deviation (MAD for near-lossless methods, for example, differential pulse code modulation (DPCM, or mean-squared error (MSE for lossy methods, for example, spectral decorrelation followed by JPEG 2000. Two strategies of interband distortion allocation are compared: given a target average bit rate, distortion may be set to be constant with wavelength. Otherwise, it may be allocated proportionally to the noise level of each band, according to the virtually lossless protocol. Comparisons with the uncompressed originals show that the average SAM of radiance spectra is minimized by constant distortion allocation to radiance data. However, variable distortion allocation according to the virtually lossless protocol yields significantly lower SAM in case of reflectance spectra obtained from compressed radiance data, if compared with the constant distortion allocation at the same compression ratio.

CMT scaling analysis and distortion evaluation in passive integral test facility

International Nuclear Information System (INIS)

Deng Chengcheng; Qin Benke; Wang Han; Chang Huajian

2013-01-01

Core makeup tank (CMT) is the crucial device of AP1000 passive core cooling system, and reasonable scaling analysis of CMT plays a key role in the design of passive integral test facilities. H2TS method was used to perform scaling analysis for both circulating mode and draining mode of CMT. And then, the similarity criteria for CMT important processes were applied in the CMT scaling design of the ACME (advanced core-cooling mechanism experiment) facility now being built in China. Furthermore, the scaling distortion results of CMT characteristic Ⅱ groups of ACME were calculated. At last, the reason of scaling distortion was analyzed and the distortion evaluation was conducted for ACME facility. The dominant processes of CMT circulating mode can be adequately simulated in the ACME facility, but the steam condensation process during CMT draining is not well preserved because the excessive CMT mass leads to more energy to be absorbed by cold metal. However, comprehensive analysis indicates that the ACME facility with high-pressure simulation scheme is able to properly represent CMT's important phenomena and processes of prototype nuclear plant. (authors)

Reduction of false positives in the detection of architectural distortion in mammograms by using a geometrically constrained phase portrait model

International Nuclear Information System (INIS)

Ayres, Fabio J.; Rangayyan, Rangaraj M.

2007-01-01

Objective One of the commonly missed signs of breast cancer is architectural distortion. We have developed techniques for the detection of architectural distortion in mammograms, based on the analysis of oriented texture through the application of Gabor filters and a linear phase portrait model. In this paper, we propose constraining the shape of the general phase portrait model as a means to reduce the false-positive rate in the detection of architectural distortion. Material and methods The methods were tested with one set of 19 cases of architectural distortion and 41 normal mammograms, and with another set of 37 cases of architectural distortion. Results Sensitivity rates of 84% with 4.5 false positives per image and 81% with 10 false positives per image were obtained for the two sets of images. Conclusion The adoption of a constrained phase portrait model with a symmetric matrix and the incorporation of its condition number in the analysis resulted in a reduction in the false-positive rate in the detection of architectural distortion. The proposed techniques, dedicated for the detection and localization of architectural distortion, should lead to efficient detection of early signs of breast cancer. (orig.)

'Distorted structure modelling' - a more physical approach to Rapid Distortion Theory

International Nuclear Information System (INIS)

Savill, A.M.

1979-11-01

Rapid Distortion Theory is reviewed in the light of the modern mechanistic approach to turbulent motion. The apparent failure of current models, based on this theory, to predict stress intensity ratios accurately in distorted shear flows is attributed to their oversimplistic assumptions concerning the inherent turbulence structure of such flows. A more realistic picture of this structure and the manner in which it responds to distortion is presented in terms of interactions between the mean flow and three principal types of eddies. If Rapid Distortion Theory is modified to account for this it is shown that the stress intensity ratios can be accurately predicted in three test flows. It is concluded that a computational scheme based on Rapid Distortion Theory might ultimately be capable of predicting turbulence parameters in the highly complex geometries of reactor cooling systems. (author)

[An improved low spectral distortion PCA fusion method].

Science.gov (United States)

Peng, Shi; Zhang, Ai-Wu; Li, Han-Lun; Hu, Shao-Xing; Meng, Xian-Gang; Sun, Wei-Dong

2013-10-01

Aiming at the spectral distortion produced in PCA fusion process, the present paper proposes an improved low spectral distortion PCA fusion method. This method uses NCUT (normalized cut) image segmentation algorithm to make a complex hyperspectral remote sensing image into multiple sub-images for increasing the separability of samples, which can weaken the spectral distortions of traditional PCA fusion; Pixels similarity weighting matrix and masks were produced by using graph theory and clustering theory. These masks are used to cut the hyperspectral image and high-resolution image into some sub-region objects. All corresponding sub-region objects between the hyperspectral image and high-resolution image are fused by using PCA method, and all sub-regional integration results are spliced together to produce a new image. In the experiment, Hyperion hyperspectral data and Rapid Eye data were used. And the experiment result shows that the proposed method has the same ability to enhance spatial resolution and greater ability to improve spectral fidelity performance.

Distorted wave approach to calculate Auger transition rates of ions in metals

Energy Technology Data Exchange (ETDEWEB)

Deutscher, Stefan A. E-mail: sad@utk.edu; Diez Muino, R.; Arnau, A.; Salin, A.; Zaremba, E

2001-08-01

We evaluate the role of target distortion in the determination of Auger transition rates for multicharged ions in metals. The required two electron matrix elements are calculated using numerical solutions of the Kohn-Sham equations for both the bound and continuum states. Comparisons with calculations performed using plane waves and hydrogenic orbitals are presented.

Set-Valued Stochastic Equation with Set-Valued Square Integrable Martingale

Directory of Open Access Journals (Sweden)

Li Jun-Gang

2017-01-01

Full Text Available In this paper, we shall introduce the stochastic integral of a stochastic process with respect to set-valued square integrable martingale. Then we shall give the Aumann integral measurable theorem, and give the set-valued stochastic Lebesgue integral and set-valued square integrable martingale integral equation. The existence and uniqueness of solution to set-valued stochastic integral equation are proved. The discussion will be useful in optimal control and mathematical finance in psychological factors.

A Cognitive Distortions and Deficits Model of Suicide Ideation

Directory of Open Access Journals (Sweden)

Laura L. Fazakas-DeHoog

2017-05-01

Full Text Available Although cognitive distortions and deficits are known risk factors for the development and escalation of suicide ideation and behaviour, no empirical work has examined how these variables interact to predict suicide ideation. The current study proposes an integrative model of cognitive distortions (hopelessness and negative evaluations of self and future and deficits (problem solving deficits, problem solving avoidance, and cognitive rigidity. To test the integrity of this model, a sample of 397 undergraduate students completed measures of deficits, distortions, and current suicide ideation. A structural equation model demonstrated excellent fit, and findings indicated that only distortions have a direct effect on suicidal thinking, whereas cognitive deficits may exert their effects on suicide ideation via their reciprocal relation with distortions. Findings underscore the importance of both cognitive distortions and deficits for understanding suicidality, which may have implications for preventative efforts and treatment.

Rate-distortion analysis of directional wavelets.

Science.gov (United States)

Maleki, Arian; Rajaei, Boshra; Pourreza, Hamid Reza

2012-02-01

The inefficiency of separable wavelets in representing smooth edges has led to a great interest in the study of new 2-D transformations. The most popular criterion for analyzing these transformations is the approximation power. Transformations with near-optimal approximation power are useful in many applications such as denoising and enhancement. However, they are not necessarily good for compression. Therefore, most of the nearly optimal transformations such as curvelets and contourlets have not found any application in image compression yet. One of the most promising schemes for image compression is the elegant idea of directional wavelets (DIWs). While these algorithms outperform the state-of-the-art image coders in practice, our theoretical understanding of them is very limited. In this paper, we adopt the notion of rate-distortion and calculate the performance of the DIW on a class of edge-like images. Our theoretical analysis shows that if the edges are not "sharp," the DIW will compress them more efficiently than the separable wavelets. It also demonstrates the inefficiency of the quadtree partitioning that is often used with the DIW. To solve this issue, we propose a new partitioning scheme called megaquad partitioning. Our simulation results on real-world images confirm the benefits of the proposed partitioning algorithm, promised by our theoretical analysis. © 2011 IEEE

Fast mode decision based on human noticeable luminance difference and rate distortion cost for H.264/AVC

Science.gov (United States)

Li, Mian-Shiuan; Chen, Mei-Juan; Tai, Kuang-Han; Sue, Kuen-Liang

2013-12-01

This article proposes a fast mode decision algorithm based on the correlation of the just-noticeable-difference (JND) and the rate distortion cost (RD cost) to reduce the computational complexity of H.264/AVC. First, the relationship between the average RD cost and the number of JND pixels is established by Gaussian distributions. Thus, the RD cost of the Inter 16 × 16 mode is compared with the predicted thresholds from these models for fast mode selection. In addition, we use the image content, the residual data, and JND visual model for horizontal/vertical detection, and then utilize the result to predict the partition in a macroblock. From the experimental results, a greater time saving can be achieved while the proposed algorithm also maintains performance and quality effectively.

Guessing and compression subject to distortion

OpenAIRE

Hanawal, Manjesh Kumar; Sundaresan, Rajesh

2010-01-01

The problem of guessing a random string is revisited. The relation-ship between guessing without distortion and compression is extended to the case when source alphabet size is countably in¯nite. Further, similar relationship is established for the case when distortion allowed by establishing a tight relationship between rate distortion codes and guessing strategies.

Wind Integration Data Sets | Grid Modernization | NREL

Science.gov (United States)

Wind Integration Data Sets Wind Integration Data Sets NREL's wind integration data sets provide the Integration Data Sets Ten-minute time-series wind data for 2004, 2005, and 2006 to help energy professionals perform wind integration studies and estimate power production from hypothetical wind power plants. Access

A Nonparametric, Multiple Imputation-Based Method for the Retrospective Integration of Data Sets

Science.gov (United States)

Carrig, Madeline M.; Manrique-Vallier, Daniel; Ranby, Krista W.; Reiter, Jerome P.; Hoyle, Rick H.

2015-01-01

Complex research questions often cannot be addressed adequately with a single data set. One sensible alternative to the high cost and effort associated with the creation of large new data sets is to combine existing data sets containing variables related to the constructs of interest. The goal of the present research was to develop a flexible, broadly applicable approach to the integration of disparate data sets that is based on nonparametric multiple imputation and the collection of data from a convenient, de novo calibration sample. We demonstrate proof of concept for the approach by integrating three existing data sets containing items related to the extent of problematic alcohol use and associations with deviant peers. We discuss both necessary conditions for the approach to work well and potential strengths and weaknesses of the method compared to other data set integration approaches. PMID:26257437

Convergence of the Distorted Wave Born series

International Nuclear Information System (INIS)

MacMillan, D.S.

1981-01-01

The aim of this thesis is to begin to understand the idea of reaction mechanisms in nonrelativistic scattering systems. If we have a complete reaction theory of a particular scattering system, then we claim that the theory itself must contain information about important reaction mechanisms in the system. This information can be used to decide what reaction mechanisms should be included in an approximate calculation. To investigate this claim, we studied several solvable models. The primary concept employed in studying our models is the convergence of the multistep series generated by iterating the corresponding scattering integral equation. We known that the eigenvalues of the kernel of the Lippmann-Schwinger equation for potential scattering determine the rate of convergence of the Born series. The Born series will converge only if these eigenvalues all life within the unit circle. We extend these results to a study of the distorted wave Born series for inelastic scattering. The convergence criterion tells us when approximations are valid. We learn how the convergence of the distorted wave series depends upon energy, coupling constants, angular momentum, and angular momentum transfer. In one of our models, we look at several possible distorting potentials to see which one gives the best convergence. We have also applied our results to several actual DWBA or coupled channel calculations in the literature. In addition to the study of models of two-body scattering systems, we have considered the case of rearrangement scattering. We have discussed the formulation of (N greater than or equal to 3)-body distorted wave equations in which the interior dynamics have been redistributed by introducing compact N-body distortion potentials

Complex Fuzzy Set-Valued Complex Fuzzy Measures and Their Properties

Science.gov (United States)

Ma, Shengquan; Li, Shenggang

2014-01-01

Let F*(K) be the set of all fuzzy complex numbers. In this paper some classical and measure-theoretical notions are extended to the case of complex fuzzy sets. They are fuzzy complex number-valued distance on F*(K), fuzzy complex number-valued measure on F*(K), and some related notions, such as null-additivity, pseudo-null-additivity, null-subtraction, pseudo-null-subtraction, autocontionuous from above, autocontionuous from below, and autocontinuity of the defined fuzzy complex number-valued measures. Properties of fuzzy complex number-valued measures are studied in detail. PMID:25093202

Distortion

OpenAIRE

Schultz, Isabella Odorico; Zmylon, Nanna Nielsen; Britze, Juliane

2014-01-01

This paper investigates the audience’s perception of the music festival Distortion. By conducting a field-study focusing on the subject’s perception of Distortion, their perception of the Distortion-attendants, and their perception on the promotion of Distortion, the paper will relate the audience perception to the promotion of the event. Using the group’s own research on the promotion of Distortion, the paper points out both the consistencies and the inconsistencies between the promotion and...

Mapping on complex neutrosophic soft expert sets

Science.gov (United States)

Al-Quran, Ashraf; Hassan, Nasruddin

2018-04-01

We introduce the mapping on complex neutrosophic soft expert sets. Further, we investigated the basic operations and other related properties of complex neutrosophic soft expert image and complex neutrosophic soft expert inverse image of complex neutrosophic soft expert sets.

Distortion-Free Watermarking Approach for Relational Database Integrity Checking

Directory of Open Access Journals (Sweden)

Lancine Camara

2014-01-01

Full Text Available Nowadays, internet is becoming a suitable way of accessing the databases. Such data are exposed to various types of attack with the aim to confuse the ownership proofing or the content protection. In this paper, we propose a new approach based on fragile zero watermarking for the authentication of numeric relational data. Contrary to some previous databases watermarking techniques which cause some distortions in the original database and may not preserve the data usability constraints, our approach simply seeks to generate the watermark from the original database. First, the adopted method partitions the database relation into independent square matrix groups. Then, group-based watermarks are securely generated and registered in a trusted third party. The integrity verification is performed by computing the determinant and the diagonal’s minor for each group. As a result, tampering can be localized up to attribute group level. Theoretical and experimental results demonstrate that the proposed technique is resilient against tuples insertion, tuples deletion, and attributes values modification attacks. Furthermore, comparison with recent related effort shows that our scheme performs better in detecting multifaceted attacks.

Theoretical study on onset of cubic distortion product otoacoustic emissions

Science.gov (United States)

Vencovský, Václav; Vetešník, Aleš

2018-05-01

The distortion product otoacoustic emissions (DPOAEs) are generated when the cochlea is stimulated by two pure tones with different frequencies f1 and f2. Onset of the DPOAE amplitude may have a nonmonotonic complex shape when the f2 is pulsed during a stationary f1 input. Observed complexities have been explained as (1) due to the secondary source of the DPOAE at the distortion product (DP) characteristic site, and (2) due to the spatial distribution of DP sources with different phases. There is also a third possibility that the complexities are due to the suppression of the f1 basilar membrane (BM) response during the f2 onset. In this study, a hydrodynamic cochlea model is used to examine influence of f1 suppression on the time course of DPOAE onset. In particular, a set of simulations was performed for frequency ratio f2/f1 = 1.26 and various levels of the primary tones (L1 and L2=30-70 dB SPL) to determine the relationship between time dependencies of the DPOAE onset and the suppression of the f1 BM response. The model predicts that suppression of the f1 BM response can cause suppression of DPOAE amplitude during the onset period.

Energy minimization of mobile video devices with a hardware H.264/AVC encoder based on energy-rate-distortion optimization

Science.gov (United States)

Kang, Donghun; Lee, Jungeon; Jung, Jongpil; Lee, Chul-Hee; Kyung, Chong-Min

2014-09-01

In mobile video systems powered by battery, reducing the encoder's compression energy consumption is critical to prolong its lifetime. Previous Energy-rate-distortion (E-R-D) optimization methods based on a software codec is not suitable for practical mobile camera systems because the energy consumption is too large and encoding rate is too low. In this paper, we propose an E-R-D model for the hardware codec based on the gate-level simulation framework to measure the switching activity and the energy consumption. From the proposed E-R-D model, an energy minimizing algorithm for mobile video camera sensor have been developed with the GOP (Group of Pictures) size and QP(Quantization Parameter) as run-time control variables. Our experimental results show that the proposed algorithm provides up to 31.76% of energy consumption saving while satisfying the rate and distortion constraints.

Solar Integration Data Sets | Grid Modernization | NREL

Science.gov (United States)

Solar Integration Data Sets Solar Integration Data Sets NREL provides the energy community with for Integration Studies Modeled solar data for energy professionals-such as transmission planners , utility planners, project developers, and university researchers-who perform solar integration studies and

Jahn-Teller distortion in the phosphorescent excited state of three-coordinate Au(I) phosphine complexes.

Science.gov (United States)

Barakat, Khaldoon A; Cundari, Thomas R; Omary, Mohammad A

2003-11-26

DFT calculations were used to optimize the phosphorescent excited state of three-coordinate [Au(PR3)3]+ complexes. The results indicate that the complexes rearrange from their singlet ground-state trigonal planar geometry to a T-shape in the lowest triplet luminescent excited state. The optimized structure of the exciton contradicts the structure predicted based on the AuP bonding properties of the ground-state HOMO and LUMO. The rearrangement to T-shape is a Jahn-Teller distortion because an electron is taken from the degenerate e' (5dxy, 5dx2-y2) orbital upon photoexcitation of the ground-state D3h complex. The calculated UV absorption and visible emission energies are consistent with the experimental data and explain the large Stokes' shifts while such correlations are not possible in optimized models that constrained the exciton to the ground-state trigonal geometry.

Predicting co-complexed protein pairs using genomic and proteomic data integration

Directory of Open Access Journals (Sweden)

King Oliver D

2004-04-01

Full Text Available Abstract Background Identifying all protein-protein interactions in an organism is a major objective of proteomics. A related goal is to know which protein pairs are present in the same protein complex. High-throughput methods such as yeast two-hybrid (Y2H and affinity purification coupled with mass spectrometry (APMS have been used to detect interacting proteins on a genomic scale. However, both Y2H and APMS methods have substantial false-positive rates. Aside from high-throughput interaction screens, other gene- or protein-pair characteristics may also be informative of physical interaction. Therefore it is desirable to integrate multiple datasets and utilize their different predictive value for more accurate prediction of co-complexed relationship. Results Using a supervised machine learning approach – probabilistic decision tree, we integrated high-throughput protein interaction datasets and other gene- and protein-pair characteristics to predict co-complexed pairs (CCP of proteins. Our predictions proved more sensitive and specific than predictions based on Y2H or APMS methods alone or in combination. Among the top predictions not annotated as CCPs in our reference set (obtained from the MIPS complex catalogue, a significant fraction was found to physically interact according to a separate database (YPD, Yeast Proteome Database, and the remaining predictions may potentially represent unknown CCPs. Conclusions We demonstrated that the probabilistic decision tree approach can be successfully used to predict co-complexed protein (CCP pairs from other characteristics. Our top-scoring CCP predictions provide testable hypotheses for experimental validation.

Upper Bounds for the Rate Distortion Function of Finite-Length Data Blocks of Gaussian WSS Sources

Directory of Open Access Journals (Sweden)

Jesús Gutiérrez-Gutiérrez

2017-10-01

Full Text Available In this paper, we present upper bounds for the rate distortion function (RDF of finite-length data blocks of Gaussian wide sense stationary (WSS sources and we propose coding strategies to achieve such bounds. In order to obtain those bounds, we previously derive new results on the discrete Fourier transform (DFT of WSS processes.

Prediction of transmission distortion for wireless video communication: analysis.

Science.gov (United States)

Chen, Zhifeng; Wu, Dapeng

2012-03-01

Transmitting video over wireless is a challenging problem since video may be seriously distorted due to packet errors caused by wireless channels. The capability of predicting transmission distortion (i.e., video distortion caused by packet errors) can assist in designing video encoding and transmission schemes that achieve maximum video quality or minimum end-to-end video distortion. This paper is aimed at deriving formulas for predicting transmission distortion. The contribution of this paper is twofold. First, we identify the governing law that describes how the transmission distortion process evolves over time and analytically derive the transmission distortion formula as a closed-form function of video frame statistics, channel error statistics, and system parameters. Second, we identify, for the first time, two important properties of transmission distortion. The first property is that the clipping noise, which is produced by nonlinear clipping, causes decay of propagated error. The second property is that the correlation between motion-vector concealment error and propagated error is negative and has dominant impact on transmission distortion, compared with other correlations. Due to these two properties and elegant error/distortion decomposition, our formula provides not only more accurate prediction but also lower complexity than the existing methods.

Ontology-based integration of topographic data sets

NARCIS (Netherlands)

Uitermark, HT; van Oosterom, PJM; Mars, NJI; Molenaar, M

The integration of topographic data sets is defined as the process of establishing relationships between corresponding object instances in different, autonomously produced, topographic data sets of the same geographic space. The problem of integrating topographic data sets is in finding these

Set-Valued Stochastic Lebesque Integral and Representation Theorems

Directory of Open Access Journals (Sweden)

Jungang Li

2008-06-01

Full Text Available In this paper, we shall firstly illustrate why we should introduce set-valued stochastic integrals, and then we shall discuss some properties of set-valued stochastic processes and the relation between a set-valued stochastic process and its selection set. After recalling the Aumann type definition of stochastic integral, we shall introduce a new definition of Lebesgue integral of a set-valued stochastic process with respect to the time t . Finally we shall prove the presentation theorem of set-valued stochastic integral and dis- cuss further properties that will be useful to study set-valued stochastic differential equations with their applications.

Methods of measurement of integral and differential linearity distortions of spectrometry sets

International Nuclear Information System (INIS)

Fuan, Jacques; Grimont, Bernard; Marin, Roland; Richard, Jean-Pierre

1969-05-01

The objective of this document is to describe different measurement methods, and more particularly to present a software for the processing of obtained results in order to avoid interpretation by the investigator. In a first part, the authors define the parameters of integral and differential linearity, outlines their importance in measurements performed by spectrometry, and describe the use of these parameters. In the second part, they propose various methods of measurement of these linearity parameters, report experimental applications of these methods and compare the obtained results

Distortion-Based Link Adaptation for Wireless Video Transmission

Directory of Open Access Journals (Sweden)

Andrew Nix

2008-06-01

Full Text Available Wireless local area networks (WLANs such as IEEE 802.11a/g utilise numerous transmission modes, each providing different throughputs and reliability levels. Most link adaptation algorithms proposed in the literature (i maximise the error-free data throughput, (ii do not take into account the content of the data stream, and (iii rely strongly on the use of ARQ. Low-latency applications, such as real-time video transmission, do not permit large numbers of retransmission. In this paper, a novel link adaptation scheme is presented that improves the quality of service (QoS for video transmission. Rather than maximising the error-free throughput, our scheme minimises the video distortion of the received sequence. With the use of simple and local rate distortion measures and end-to-end distortion models at the video encoder, the proposed scheme estimates the received video distortion at the current transmission rate, as well as on the adjacent lower and higher rates. This allows the system to select the link-speed which offers the lowest distortion and to adapt to the channel conditions. Simulation results are presented using the MPEG-4/AVC H.264 video compression standard over IEEE 802.11g. The results show that the proposed system closely follows the optimum theoretic solution.

Rate dependent image distortions in proportional counters

International Nuclear Information System (INIS)

Trow, M.W.; Bento, A.C.; Smith, A.

1994-01-01

The positional linearity of imaging proportional counters is affected by the intensity distribution of the incident radiation. A mechanism for this effect is described, in which drifting positive ions in the gas produce a distorting electric field which perturbs the trajectories of the primary electrons. In certain cases, the phenomenon causes an apparent improvement of the position resolution. We demonstrate the effect in a detector filled with a xenon-argon-CO 2 mixture. The images obtained are compared with the results of a simulation. If quantitative predictions for a particular detector are required, accurate values of the absolute detector gain, ion mobility and electron drift velocity are needed. ((orig.))

Advanced Engineering Methods for Assessing Welding Distortion in Aero-Engine Assemblies

International Nuclear Information System (INIS)

Jackson, Kathryn; Darlington, Roger

2011-01-01

Welding remains an attractive fabrication method for aero-engine assemblies, offering high production rates and reduced total cost, particularly for large complex assemblies. However, distortion generated during the welding process continues to provide a major challenge in terms of the control of geometric tolerances and residual stress. The welding distortion is influenced by the sequence and position of joints, the clamping configuration and the design of the assembly. For large complex assemblies the range of these options may be large. Hence the use of numerical simulation at an early stage of the product development process is valuable to enable a wide range of these factors to be explored with the aim of minimising welding distortions before production commences, and thereby reducing the product development time. In this paper, a new technique for simulation of welding distortions based on a shrinkage analysis is evaluated for an aero-engine assembly. The shrinkage simulations were built and solved using the ESI Group software Weld Planner. The rapid simulation speed enabled a wide range of welding plans to be explored, leading to recommendations for the fabrication process. The sensitivity of the model to mesh size and material properties is reported. The results of the shrinkage analysis were found to be similar to those of a transient analysis generated using ESI Group software SysWeld. The solution times were found to be significantly lower for the shrinkage analysis than the transient analysis. Hence it has been demonstrated that shrinkage analysis is a valuable tool for exploring the fabrication process of a welded assembly at an early stage of the product development process.

Complex Urban LiDAR Data Set

OpenAIRE

Jeong, Jinyong; Cho, Younggun; Shin, Young-Sik; Roh, Hyunchul; Kim, Ayoung

2018-01-01

This paper presents a Light Detection and Ranging (LiDAR) data set that targets complex urban environments. Urban environments with high-rise buildings and congested traffic pose a significant challenge for many robotics applications. The presented data set is unique in the sense it is able to capture the genuine features of an urban environment (e.g. metropolitan areas, large building complexes and underground parking lots). Data of two-dimensional (2D) and threedimensional (3D) LiDAR, which...

Probable mode prediction for H.264 advanced video coding P slices using removable SKIP mode distortion estimation

Science.gov (United States)

You, Jongmin; Jeong, Jechang

2010-02-01

The H.264/AVC (advanced video coding) is used in a wide variety of applications including digital broadcasting and mobile applications, because of its high compression efficiency. The variable block mode scheme in H.264/AVC contributes much to its high compression efficiency but causes a selection problem. In general, rate-distortion optimization (RDO) is the optimal mode selection strategy, but it is computationally intensive. For this reason, the H.264/AVC encoder requires a fast mode selection algorithm for use in applications that require low-power and real-time processing. A probable mode prediction algorithm for the H.264/AVC encoder is proposed. To reduce the computational complexity of RDO, the proposed method selects probable modes among all allowed block modes using removable SKIP mode distortion estimation. Removable SKIP mode distortion is used to estimate whether or not a further divided block mode is appropriate for a macroblock. It is calculated using a no-motion reference block with a few computations. Then the proposed method reduces complexity by performing the RDO process only for probable modes. Experimental results show that the proposed algorithm can reduce encoding time by an average of 55.22% without significant visual quality degradation and increased bit rate.

RATING MODELS AND INFORMATION TECHNOLOGIES APPLICATION FOR MANAGEMENT OF ADMINISTRATIVE-TERRITORIAL COMPLEXES

Directory of Open Access Journals (Sweden)

O. M. Pshinko

2016-12-01

Full Text Available Purpose. The paper aims to develop rating models and related information technologies designed to resolve the tasks of strategic planning of the administrative and territorial units’ development, as well as the tasks of multi-criteria control of inhomogeneous multiparameter objects operation. Methodology. When solving problems of strategic planning of administrative and territorial development and heterogeneous classes management of objects under control, a set of agreed methods is used. Namely the multi-criteria properties analysis for objects of planning and management, diagnostics of the state parameters, forecasting and management of complex systems of different classes. Their states are estimated by sets of different quality indicators, as well as represented by the individual models of operation process. A new information technology is proposed and created to implement the strategic planning and management tasks. This technology uses the procedures for solving typical tasks, that are implemented in MS SQL Server. Findings. A new approach to develop models of analyze and management of complex systems classes based on the ratings has been proposed. Rating models development for analysis of multicriteria and multiparameter systems has been obtained. The management of these systems is performed on the base of parameters of the current and predicted state by non-uniform distribution of resources. The procedure of sensitivity analysis of the changes in the rating model of inhomogeneous distribution of resources parameters has been developed. The information technology of strategic planning and management of heterogeneous classes of objects based on the rating model has been created. Originality. This article proposes a new approach of the rating indicators’ using as a general model for strategic planning of the development and management of heterogeneous objects that can be characterized by the sets of parameters measured on different scales

Response Distortion on Personality Tests in Applicants: Comparing High-Stakes to Low-Stakes Medical Settings

Science.gov (United States)

Anglim, Jeromy; Bozic, Stefan; Little, Jonathon; Lievens, Filip

2018-01-01

The current study examined the degree to which applicants applying for medical internships distort their responses to personality tests and assessed whether this response distortion led to reduced predictive validity. The applicant sample (n = 530) completed the NEO Personality Inventory whilst applying for one of 60 positions as first-year…

Distortion-Rate Bounds for Distributed Estimation Using Wireless Sensor Networks

Directory of Open Access Journals (Sweden)

Nihar Jindal

2008-03-01

Full Text Available We deal with centralized and distributed rate-constrained estimation of random signal vectors performed using a network of wireless sensors (encoders communicating with a fusion center (decoder. For this context, we determine lower and upper bounds on the corresponding distortion-rate (D-R function. The nonachievable lower bound is obtained by considering centralized estimation with a single-sensor which has all observation data available, and by determining the associated D-R function in closed-form. Interestingly, this D-R function can be achieved using an estimate first compress afterwards (EC approach, where the sensor (i forms the minimum mean-square error (MMSE estimate for the signal of interest; and (ii optimally (in the MSE sense compresses and transmits it to the FC that reconstructs it. We further derive a novel alternating scheme to numerically determine an achievable upper bound of the D-R function for general distributed estimation using multiple sensors. The proposed algorithm tackles an analytically intractable minimization problem, while it accounts for sensor data correlations. The obtained upper bound is tighter than the one determined by having each sensor performing MSE optimal encoding independently of the others. Numerical examples indicate that the algorithm performs well and yields D-R upper bounds which are relatively tight with respect to analytical alternatives obtained without taking into account the cross-correlations among sensor data.

Distortional solutions for loaded semi-discretized thin-walled beams

DEFF Research Database (Denmark)

Andreassen, Michael Joachim; Jönsson, Jeppe

2012-01-01

distortional displacement fields which decouple the reduced order differential equations. In this process the cross section is discretized into finite cross-section elements, and the natural distortional modes as well as the related axial variations are found as solutions to the established coupled fourth...... order homogeneous differential equations of GBT.In this paper the non-homogeneous distortional differential equations of GBT are formulated using this novel semi-discretization process. Transforming these non-homogeneous distortional differential equations into the natural eigenmode space by using...... the distortional modal matrix found for the homogeneous system, we get the uncoupled set of differential equations including the distributed loads. This uncoupling is very important in GBT, since the shear stiffness contribution from St. Venant torsional shear stress as well as “Bredt's shear flow” cannot...

Modeling Kinetics of Distortion in Porous Bi-layered Structures

DEFF Research Database (Denmark)

Tadesse Molla, Tesfaye; Frandsen, Henrik Lund; Bjørk, Rasmus

2013-01-01

because of different sintering rates of the materials resulting in undesired distortions of the component. An analytical model based on the continuum theory of sintering has been developed to describe the kinetics of densification and distortion in the sintering processes. A new approach is used...... to extract the material parameters controlling shape distortion through optimizing the model to experimental data of free shrinkage strains. The significant influence of weight of the sample (gravity) on the kinetics of distortion is taken in to consideration. The modeling predictions indicate good agreement...

Components of segregation distortion in Drosophila melanogaster

International Nuclear Information System (INIS)

Ganetzky, B.

1977-01-01

The segregation distorter (SD) complex is a naturally occurring meiotic drive system with the property that males heterozygous for an SD-bearing chromosome 2 and an SD+-bearing homolog transmit the SD-bearing chromosome almost exclusively. This distorted segregation is the consequence of an induced dysfunction of those sperm that receive the SD+ homolog. From previous studies, two loci have been implicated in this phenomenon: the Sd locus which is required to produce distortion, and the Responder (Rsp) locus that is the site at which Sd acts. There are two allelic alternatives of Rsp-sensitive (Rsp/sup sens/) and insensitive (Rsp/sup ins/); a chromosome carrying Rsp/sup ins/ is not distorted by SD. In the present study, the function and location of each of these elements was examined by a genetic and cytological characterization of x-ray-induced mutations at each locus. The results indicate the following: the Rsp locus is located in the proximal heterochromatin of 2R; a deletion for the Rsp locus renders a chromosome insensitive to distortion; the Sd locus is located to the left of pr (2-54.5), in the region from 37D2-D7 to 38A6-B2 of the salivary chromosome map; an SD chromosome deleted for Sd loses its ability to distort; there is another important component of the SD system, E(SD), in or near the proximal heterochromatin of 2L, that behaves as a strong enhancer of distortion. The results of these studies allow a reinterpretation of results from earlier analyses of the SD system and serve to limit the possible mechanisms to account for segregation distortion

Ultrasonographic Findings of Mammographic Architectural Distortion

International Nuclear Information System (INIS)

Ma, Jeong Hyun; Kang, Bong Joo; Cha, Eun Suk; Hwangbo, Seol; Kim, Hyeon Sook; Park, Chang Suk; Kim, Sung Hun; Choi, Jae Jeong; Chung, Yong An

2008-01-01

To review the sonographic findings of various diseases showing architectural distortion depicted under mammography. We collected and reviewed architectural distortions observed under mammography at our health institution between 1 March 2004, and 28 February 2007. We collected 23 cases of sonographically-detected mammographic architectural distortions that confirmed lesions after surgical resection. The sonographic findings of mammographic architectural distortion were analyzed by use of the BI-RADS lexicon for shape, margin, lesion boundary, echo pattern, posterior acoustic feature and orientation. There were variable diseases that showed architectural distortion depicted under mammography. Fibrocystic disease was the most common presentation (n = 6), followed by adenosis (n = 2), stromal fibrosis (n = 2), radial scar (n = 3), usual ductal hyperplasia (n = 1), atypical ductal hyperplasia (n = 1) and mild fibrosis with microcalcification (n = 1). Malignant lesions such as ductal carcinoma in situ (DCIS) (n = 2), lobular carcinoma in situ (LCIS) (n = 2), invasive ductal carcinoma (n = 2) and invasive lobular carcinoma (n = 1) were observed. As observed by sonography, shape was divided as irregular (n = 22) and round (n = 1). Margin was divided as circumscribed (n = 1), indistinct (n = 7), angular (n = 1), microlobulated (n = 1) and sipculated (n = 13). Lesion boundary was divided as abrupt interface (n = 11) and echogenic halo (n = 12). Echo pattern was divided as hypoechoic (n = 20), anechoic (n = 1), hyperechoic (n = 1) and isoechoic (n = 1). Posterior acoustic feature was divided as posterior acoustic feature (n = 7), posterior acoustic shadow (n = 15) and complex posterior acoustic feature (n = 1). Orientation was divided as parallel (n = 12) and not parallel (n = 11). There were no differential sonographic findings between benign and malignant lesions. This study presented various sonographic findings of mammographic architectural distortion and that it is

New technique for real-time distortion-invariant multiobject recognition and classification

Science.gov (United States)

Hong, Rutong; Li, Xiaoshun; Hong, En; Wang, Zuyi; Wei, Hongan

2001-04-01

A real-time hybrid distortion-invariant OPR system was established to make 3D multiobject distortion-invariant automatic pattern recognition. Wavelet transform technique was used to make digital preprocessing of the input scene, to depress the noisy background and enhance the recognized object. A three-layer backpropagation artificial neural network was used in correlation signal post-processing to perform multiobject distortion-invariant recognition and classification. The C-80 and NOA real-time processing ability and the multithread programming technology were used to perform high speed parallel multitask processing and speed up the post processing rate to ROIs. The reference filter library was constructed for the distortion version of 3D object model images based on the distortion parameter tolerance measuring as rotation, azimuth and scale. The real-time optical correlation recognition testing of this OPR system demonstrates that using the preprocessing, post- processing, the nonlinear algorithm os optimum filtering, RFL construction technique and the multithread programming technology, a high possibility of recognition and recognition rate ere obtained for the real-time multiobject distortion-invariant OPR system. The recognition reliability and rate was improved greatly. These techniques are very useful to automatic target recognition.

The role of visual similarity and memory in body model distortions.

Science.gov (United States)

Saulton, Aurelie; Longo, Matthew R; Wong, Hong Yu; Bülthoff, Heinrich H; de la Rosa, Stephan

2016-02-01

Several studies have shown that the perception of one's own hand size is distorted in proprioceptive localization tasks. It has been suggested that those distortions mirror somatosensory anisotropies. Recent research suggests that non-corporeal items also show some spatial distortions. In order to investigate the psychological processes underlying the localization task, we investigated the influences of visual similarity and memory on distortions observed on corporeal and non-corporeal items. In experiment 1, participants indicated the location of landmarks on: their own hand, a rubber hand (rated as most similar to the real hand), and a rake (rated as least similar to the real hand). Results show no significant differences between rake and rubber hand distortions but both items were significantly less distorted than the hand. Experiments 2 and 3 explored the role of memory in spatial distance judgments of the hand, the rake and the rubber hand. Spatial representations of items measured in experiments 2 and 3 were also distorted but showed the tendency to be smaller than in localization tasks. While memory and visual similarity seem to contribute to explain qualitative similarities in distortions between the hand and non-corporeal items, those factors cannot explain the larger magnitude observed in hand distortions. Copyright © 2015. Published by Elsevier B.V.

A Tryptoline Ring-Distortion Strategy Leads to Complex and Diverse Biologically Active Molecules from the Indole Alkaloid Yohimbine.

Science.gov (United States)

Paciaroni, Nicholas G; Ratnayake, Ranjala; Matthews, James H; Norwood, Verrill M; Arnold, Austin C; Dang, Long H; Luesch, Hendrik; Huigens, Robert W

2017-03-28

High-throughput screening (HTS) is the primary driver to current drug-discovery efforts. New therapeutic agents that enter the market are a direct reflection of the structurally simple compounds that make up screening libraries. Unlike medically relevant natural products (e.g., morphine), small molecules currently being screened have a low fraction of sp 3 character and few, if any, stereogenic centers. Although simple compounds have been useful in drugging certain biological targets (e.g., protein kinases), more sophisticated targets (e.g., transcription factors) have largely evaded the discovery of new clinical agents from screening collections. Herein, a tryptoline ring-distortion strategy is described that enables the rapid synthesis of 70 complex and diverse compounds from yohimbine (1); an indole alkaloid. The compounds that were synthesized had architecturally complex and unique scaffolds, unlike 1 and other scaffolds. These compounds were subjected to phenotypic screens and reporter gene assays, leading to the identification of new compounds that possessed various biological activities, including antiproliferative activities against cancer cells with functional hypoxia-inducible factors, nitric oxide inhibition, and inhibition and activation of the antioxidant response element. This tryptoline ring-distortion strategy can begin to address diversity problems in screening libraries, while occupying biologically relevant chemical space in areas critical to human health. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Distorted Fingerprint Verification System

Directory of Open Access Journals (Sweden)

Divya KARTHIKAESHWARAN

2011-01-01

Full Text Available Fingerprint verification is one of the most reliable personal identification methods. Fingerprint matching is affected by non-linear distortion introduced in fingerprint impression during the image acquisition process. This non-linear deformation changes both the position and orientation of minutiae. The proposed system operates in three stages: alignment based fingerprint matching, fuzzy clustering and classifier framework. First, an enhanced input fingerprint image has been aligned with the template fingerprint image and matching score is computed. To improve the performance of the system, a fuzzy clustering based on distance and density has been used to cluster the feature set obtained from the fingerprint matcher. Finally a classifier framework has been developed and found that cost sensitive classifier produces better results. The system has been evaluated on fingerprint database and the experimental result shows that system produces a verification rate of 96%. This system plays an important role in forensic and civilian applications.

River rating complexity

Science.gov (United States)

Holmes, Robert R.

2016-01-01

Accuracy of streamflow data depends on the veracity of the rating model used to derive a continuous time series of discharge from the surrogate variables that can readily be collected autonomously at a streamgage. Ratings are typically represented as a simple monotonic increasing function (simple rating), meaning the discharge is a function of stage alone, however this is never truly the case unless the flow is completely uniform at all stages and in transitions from one stage to the next. For example, at some streamflow-monitoring sites the discharge on the rising limb of the hydrograph is discernably larger than the discharge at the same stage on the falling limb of the hydrograph. This is the so-called “loop rating curve” (loop rating). In many cases, these loops are quite small and variation between rising- and falling-limb discharge measurements made at the same stage are well within the accuracy of the measurements. However, certain hydraulic conditions can produce a loop that is large enough to preclude use of a monotonic rating. A detailed data campaign for the Mississippi River at St. Louis, Missouri during a multi-peaked flood over a 56-day period in 2015 demonstrates the rating complexity at this location. The shifting-control method used to deal with complexity at this site matched all measurements within 8%.

JET ENGINE INLET DISTORTION SCREEN AND DESCRIPTOR EVALUATION

Directory of Open Access Journals (Sweden)

Jiří Pečinka

2017-02-01

Full Text Available Total pressure distortion is one of the three basic flow distortions (total pressure, total temperature and swirl distortion that might appear at the inlet of a gas turbine engine (GTE during operation. Different numerical parameters are used for assessing the total pressure distortion intensity and extent. These summary descriptors are based on the distribution of total pressure in the aerodynamic interface plane. There are two descriptors largely spread around the world, however, three or four others are still in use and can be found in current references. The staff at the University of Defence decided to compare the most common descriptors using basic flow distortion patterns in order to select the most appropriate descriptor for future department research. The most common descriptors were identified based on their prevalence in widely accessible publications. The construction and use of these descriptors are reviewed in the paper. Subsequently, they are applied to radial, angular, and combined distortion patterns of different intensities and with varied mass flow rates. The tests were performed on a specially designed test bench using an electrically driven standalone industrial centrifugal compressor, sucking air through the inlet of a TJ100 small turbojet engine. Distortion screens were placed into the inlet channel to create the desired total pressure distortions. Of the three basic distortions, only the total pressure distortion descriptors were evaluated. However, both total and static pressures were collected using a multi probe rotational measurement system.

Complex Conjugated certificateless-based signcryption with differential integrated factor for secured message communication in mobile network.

Directory of Open Access Journals (Sweden)

Sumithra Alagarsamy

Full Text Available Certificateless-based signcryption overcomes inherent shortcomings in traditional Public Key Infrastructure (PKI and Key Escrow problem. It imparts efficient methods to design PKIs with public verifiability and cipher text authenticity with minimum dependency. As a classic primitive in public key cryptography, signcryption performs validity of cipher text without decryption by combining authentication, confidentiality, public verifiability and cipher text authenticity much more efficiently than the traditional approach. In this paper, we first define a security model for certificateless-based signcryption called, Complex Conjugate Differential Integrated Factor (CC-DIF scheme by introducing complex conjugates through introduction of the security parameter and improving secured message distribution rate. However, both partial private key and secret value changes with respect to time. To overcome this weakness, a new certificateless-based signcryption scheme is proposed by setting the private key through Differential (Diff Equation using an Integration Factor (DiffEIF, minimizing computational cost and communication overhead. The scheme is therefore said to be proven secure (i.e. improving the secured message distributing rate against certificateless access control and signcryption-based scheme. In addition, compared with the three other existing schemes, the CC-DIF scheme has the least computational cost and communication overhead for secured message communication in mobile network.

Complex Conjugated certificateless-based signcryption with differential integrated factor for secured message communication in mobile network.

Science.gov (United States)

Alagarsamy, Sumithra; Rajagopalan, S P

2017-01-01

Certificateless-based signcryption overcomes inherent shortcomings in traditional Public Key Infrastructure (PKI) and Key Escrow problem. It imparts efficient methods to design PKIs with public verifiability and cipher text authenticity with minimum dependency. As a classic primitive in public key cryptography, signcryption performs validity of cipher text without decryption by combining authentication, confidentiality, public verifiability and cipher text authenticity much more efficiently than the traditional approach. In this paper, we first define a security model for certificateless-based signcryption called, Complex Conjugate Differential Integrated Factor (CC-DIF) scheme by introducing complex conjugates through introduction of the security parameter and improving secured message distribution rate. However, both partial private key and secret value changes with respect to time. To overcome this weakness, a new certificateless-based signcryption scheme is proposed by setting the private key through Differential (Diff) Equation using an Integration Factor (DiffEIF), minimizing computational cost and communication overhead. The scheme is therefore said to be proven secure (i.e. improving the secured message distributing rate) against certificateless access control and signcryption-based scheme. In addition, compared with the three other existing schemes, the CC-DIF scheme has the least computational cost and communication overhead for secured message communication in mobile network.

Spatial Precision in Magnetic Resonance Imaging–Guided Radiation Therapy: The Role of Geometric Distortion

Energy Technology Data Exchange (ETDEWEB)

Weygand, Joseph, E-mail: jw2899@columbia.edu [Department of Radiation Physics, The University of Texas MD Anderson Cancer Center, Houston, Texas (United States); The University of Texas Graduate School of Biomedical Sciences at Houston, Houston, Texas (United States); Fuller, Clifton David [The University of Texas Graduate School of Biomedical Sciences at Houston, Houston, Texas (United States); Department of Radiation Oncology, The University of Texas MD Anderson Cancer Center, Houston, Texas (United States); Ibbott, Geoffrey S. [Department of Radiation Physics, The University of Texas MD Anderson Cancer Center, Houston, Texas (United States); The University of Texas Graduate School of Biomedical Sciences at Houston, Houston, Texas (United States); Mohamed, Abdallah S.R. [Department of Radiation Oncology, The University of Texas MD Anderson Cancer Center, Houston, Texas (United States); Department of Clinical Oncology and Nuclear Medicine, Alexandria University, Alexandria (Egypt); Ding, Yao [Department of Radiation Oncology, The University of Texas MD Anderson Cancer Center, Houston, Texas (United States); Yang, Jinzhong [Department of Radiation Physics, The University of Texas MD Anderson Cancer Center, Houston, Texas (United States); The University of Texas Graduate School of Biomedical Sciences at Houston, Houston, Texas (United States); Hwang, Ken-Pin [Department of Imaging Physics, The University of Texas MD Anderson Cancer Center, Houston, Texas (United States); Wang, Jihong [Department of Radiation Physics, The University of Texas MD Anderson Cancer Center, Houston, Texas (United States); The University of Texas Graduate School of Biomedical Sciences at Houston, Houston, Texas (United States)

2016-07-15

Because magnetic resonance imaging–guided radiation therapy (MRIgRT) offers exquisite soft tissue contrast and the ability to image tissues in arbitrary planes, the interest in this technology has increased dramatically in recent years. However, intrinsic geometric distortion stemming from both the system hardware and the magnetic properties of the patient affects MR images and compromises the spatial integrity of MRI-based radiation treatment planning, given that for real-time MRIgRT, precision within 2 mm is desired. In this article, we discuss the causes of geometric distortion, describe some well-known distortion correction algorithms, and review geometric distortion measurements from 12 studies, while taking into account relevant imaging parameters. Eleven of the studies reported phantom measurements quantifying system-dependent geometric distortion, while 2 studies reported simulation data quantifying magnetic susceptibility–induced geometric distortion. Of the 11 studies investigating system-dependent geometric distortion, 5 reported maximum measurements less than 2 mm. The simulation studies demonstrated that magnetic susceptibility–induced distortion is typically smaller than system-dependent distortion but still nonnegligible, with maximum distortion ranging from 2.1 to 2.6 mm at a field strength of 1.5 T. As expected, anatomic landmarks containing interfaces between air and soft tissue had the largest distortions. The evidence indicates that geometric distortion reduces the spatial integrity of MRI-based radiation treatment planning and likely diminishes the efficacy of MRIgRT. Better phantom measurement techniques and more effective distortion correction algorithms are needed to achieve the desired spatial precision.

Spatial Precision in Magnetic Resonance Imaging–Guided Radiation Therapy: The Role of Geometric Distortion

International Nuclear Information System (INIS)

Weygand, Joseph; Fuller, Clifton David; Ibbott, Geoffrey S.; Mohamed, Abdallah S.R.; Ding, Yao; Yang, Jinzhong; Hwang, Ken-Pin; Wang, Jihong

2016-01-01

Because magnetic resonance imaging–guided radiation therapy (MRIgRT) offers exquisite soft tissue contrast and the ability to image tissues in arbitrary planes, the interest in this technology has increased dramatically in recent years. However, intrinsic geometric distortion stemming from both the system hardware and the magnetic properties of the patient affects MR images and compromises the spatial integrity of MRI-based radiation treatment planning, given that for real-time MRIgRT, precision within 2 mm is desired. In this article, we discuss the causes of geometric distortion, describe some well-known distortion correction algorithms, and review geometric distortion measurements from 12 studies, while taking into account relevant imaging parameters. Eleven of the studies reported phantom measurements quantifying system-dependent geometric distortion, while 2 studies reported simulation data quantifying magnetic susceptibility–induced geometric distortion. Of the 11 studies investigating system-dependent geometric distortion, 5 reported maximum measurements less than 2 mm. The simulation studies demonstrated that magnetic susceptibility–induced distortion is typically smaller than system-dependent distortion but still nonnegligible, with maximum distortion ranging from 2.1 to 2.6 mm at a field strength of 1.5 T. As expected, anatomic landmarks containing interfaces between air and soft tissue had the largest distortions. The evidence indicates that geometric distortion reduces the spatial integrity of MRI-based radiation treatment planning and likely diminishes the efficacy of MRIgRT. Better phantom measurement techniques and more effective distortion correction algorithms are needed to achieve the desired spatial precision.

The effect of inlet distorted flow on steady and unsteady performance of a centrifugal compressor

International Nuclear Information System (INIS)

Park, Jae Hyoung; Kang, Shin Hyoung

2005-01-01

Effects of inlet distorted flow on performance, stall and surge are experimentally investigated for a high-speed centrifugal compressor. Tested results for the distorted inlet flow cases are compared with the result of the undistorted one. The performance of compressor is slightly deteriorated due to the inlet distortion. The inlet distortion does not affect the number of stall cell and the propagation velocity. It also does not change stall inception flow rate. However, as the distortion increases, stall starts at the higher flow rate for low speed at the lower flow rate for high speed. For 50,000 rpm stall occurs as the flow rate decreases, however disappears for the smaller flow rate. This is due to the interaction of surge and stall. After the stall and surge interact, the number of stall cell decreases

Visualization and spectral synthesis of rotationally distorted stars

International Nuclear Information System (INIS)

Dall, T H; Sbordone, L

2011-01-01

Simple spherical, non-rotating stellar models are inadequate when describing real stars in the limit of very fast rotation: Both the observable spectrum and the geometrical shape of the star deviate strongly from simple models. We attempt to approach the problem of modeling geometrically distorted, rapidly rotating stars from a new angle: By constructing distorted geometrical models and integrating standard stellar models with varying temperature, gravity, and abundances, over the entire surface, we attempt a semi-empirical approach to modeling. Here we present our methodology, and present simple examples of applications.

Crystallite size and lattice distortion of human dental enamel estimated from the integral width of x-ray diffraction peak profile

International Nuclear Information System (INIS)

Maruyama, Fumiaki; Sakae, Toshiro

2000-01-01

Crystallite size and lattice distortion of human dental enamel were estimated by peak profile analysis using x-ray diffraction pattern. Firstly, noises were removed from x-ray diffraction pattern, and deconvolution of overlapping peaks and determination of baseline level were carried out. Then, the instrumental peak broadening and effect of overlapping Kα1 and Kα2 were eliminated to obtain pure peak profile using the Stokes's Fourier method. The integral width method was applied for estimation of crystallite size and 'upper-limit of distortion', assuming the peak profile as Cauchy function. The estimated crystallite size and distortion were ca. 210 A and ca. 0.4% in the a-axis direction and ca. 550 A and ca. 0.7% in the c-axis direction, respectively. The crystallite size value along the a-axis was almost the same to the previously reported values, but the value for along the c-axis was nearly half of the reported values. The crystallite size in this study means the size of coherent domain in contrast to the size of particle which may contain several domains in the case of enamel crystals. The results suggest that human enamel crystals grow in their size along the c-axis by multiplication, fusion of crystallites. It was notable that the distortion value was larger in the c-axis direction. The phenomenon may partly be due to the high carbonate ion content of enamel crystals and partly due to crystal growth mechanism. (author)

High-level waste program integration within the DOE complex

International Nuclear Information System (INIS)

Valentine, J.H.; Malone, K.; Schaus, P.S.

1998-03-01

Eleven major Department of Energy (DOE) site contractors were chartered by the Assistant Secretary to use a systems engineering approach to develop and evaluate technically defensible cost savings opportunities across the complex. Known as the complex-wide Environmental Management Integration (EMI), this process evaluated all the major DOE waste streams including high level waste (HLW). Across the DOE complex, this waste stream has the highest life cycle cost and is scheduled to take until at least 2035 before all HLW is processed for disposal. Technical contract experts from the four DOE sites that manage high level waste participated in the integration analysis: Hanford, Savannah River Site (SRS), Idaho National Engineering and Environmental Laboratory (INEEL), and West Valley Demonstration Project (WVDP). In addition, subject matter experts from the Yucca Mountain Project and the Tanks Focus Area participated in the analysis. Also, departmental representatives from the US Department of Energy Headquarters (DOE-HQ) monitored the analysis and results. Workouts were held throughout the year to develop recommendations to achieve a complex-wide integrated program. From this effort, the HLW Environmental Management (EM) Team identified a set of programmatic and technical opportunities that could result in potential cost savings and avoidance in excess of $18 billion and an accelerated completion of the HLW mission by seven years. The cost savings, schedule improvements, and volume reduction are attributed to a multifaceted HLW treatment disposal strategy which involves waste pretreatment, standardized waste matrices, risk-based retrieval, early development and deployment of a shipping system for glass canisters, and reasonable, low cost tank closure

Unsteady Reynolds-averaged Navier-Stokes simulations of inlet distortion in the fan system of a gas-turbine aero-engine

Science.gov (United States)

Spotts, Nathan

As modern trends in commercial aircraft design move toward high-bypass-ratio fan systems of increasing diameter with shorter, nonaxisymmetric nacelle geometries, inlet distortion is becoming common in all operating regimes. The distortion may induce aerodynamic instabilities within the fan system, leading to catastrophic damage to fan blades, should the surge margin be exceeded. Even in the absence of system instability, the heterogeneity of the flow affects aerodynamic performance significantly. Therefore, an understanding of fan-distortion interaction is critical to aircraft engine system design. This thesis research elucidates the complex fluid dynamics and fan-distortion interaction by means of computational fluid dynamics (CFD) modeling of a complete engine fan system; including rotor, stator, spinner, nacelle and nozzle; under conditions typical of those encountered by commercial aircraft. The CFD simulations, based on a Reynolds-averaged Navier-Stokes (RANS) approach, were unsteady, three-dimensional, and of a full-annulus geometry. A thorough, systematic validation has been performed for configurations from a single passage of a rotor to a full-annulus system by comparing the predicted flow characteristics and aerodynamic performance to those found in literature. The original contributions of this research include the integration of a complete engine fan system, based on the NASA rotor 67 transonic stage and representative of the propulsion systems in commercial aircraft, and a benchmark case for unsteady RANS simulations of distorted flow in such a geometry under realistic operating conditions. This study is unique in that the complex flow dynamics, resulting from fan-distortion interaction, were illustrated in a practical geometry under realistic operating conditions. For example, the compressive stage is shown to influence upstream static pressure distributions and thus suppress separation of flow on the nacelle. Knowledge of such flow physics is

Aumann Type Set-valued Lebesgue Integral and Representation Theorem

Directory of Open Access Journals (Sweden)

Jungang Li

2009-03-01

Full Text Available n this paper, we shall firstly illustrate why we should discuss the Aumann type set-valued Lebesgue integral of a set-valued stochastic process with respect to time t under the condition that the set-valued stochastic process takes nonempty compact subset of d -dimensional Euclidean space. After recalling some basic results about set-valued stochastic processes, we shall secondly prove that the Aumann type set-valued Lebesgue integral of a set-valued stochastic process above is a set-valued stochastic process. Finally we shall give the representation theorem, and prove an important inequality of the Aumann type set-valued Lebesgue integrals of set-valued stochastic processes with respect to t , which are useful to study set-valued stochastic differential inclusions with applications in finance.

Experimental orofacial pain and sensory deprivation lead to perceptual distortion of the face in healthy volunteers.

Science.gov (United States)

Dagsdóttir, Lilja Kristín; Skyt, Ina; Vase, Lene; Baad-Hansen, Lene; Castrillon, Eduardo; Svensson, Peter

2015-09-01

Patients suffering from persistent orofacial pain may sporadically report that the painful area feels "swollen" or "differently," a phenomenon that may be conceptualized as a perceptual distortion because there are no clinical signs of swelling present. Our aim was to investigate whether standardized experimental pain and sensory deprivation of specific orofacial test sites would lead to changes in the size perception of these face areas. Twenty-four healthy participants received either 0.2 mL hypertonic saline (HS) or local anesthetics (LA) into six regions (buccal, mental, lingual, masseter muscle, infraorbital and auriculotemporal nerve regions). Participants estimated the perceived size changes in percentage (0 % = no change, -100 % = half the size or +100 % = double the size), and somatosensory function was checked with tactile stimuli. The pain intensity was rated on a 0-10 Verbal Numerical Rating Scale (VNRS), and sets of psychological questionnaires were completed. HS and LA were associated with significant self-reported perceptual distortions as indicated by consistent increases in perceived size of the adjacent face areas (P ≤ 0.050). Perceptual distortion was most pronounced in the buccal region, and the smallest increase was observed in the auriculotemporal region. HS was associated with moderate levels of pain VNRS = 7.3 ± 0.6. Weak correlations were found between HS-evoked perceptual distortion and level of dissociation in two regions (P pain and transient sensory deprivation evoked perceptual distortions in all face regions and overall demonstrated the importance of afferent inputs for the perception of the face. We propose that perceptual distortion may be an important phenomenon to consider in persistent orofacial pain conditions.

An Iterative Optimization Algorithm for Lens Distortion Correction Using Two-Parameter Models

Directory of Open Access Journals (Sweden)

Daniel Santana-Cedrés

2016-12-01

Full Text Available We present a method for the automatic estimation of two-parameter radial distortion models, considering polynomial as well as division models. The method first detects the longest distorted lines within the image by applying the Hough transform enriched with a radial distortion parameter. From these lines, the first distortion parameter is estimated, then we initialize the second distortion parameter to zero and the two-parameter model is embedded into an iterative nonlinear optimization process to improve the estimation. This optimization aims at reducing the distance from the edge points to the lines, adjusting two distortion parameters as well as the coordinates of the center of distortion. Furthermore, this allows detecting more points belonging to the distorted lines, so that the Hough transform is iteratively repeated to extract a better set of lines until no improvement is achieved. We present some experiments on real images with significant distortion to show the ability of the proposed approach to automatically correct this type of distortion as well as a comparison between the polynomial and division models.

Ontology-based geographic data set integration

NARCIS (Netherlands)

Uitermark, H.T.J.A.; Uitermark, Harry T.; Oosterom, Peter J.M.; Mars, Nicolaas; Molenaar, Martien; Molenaar, M.

1999-01-01

In order to develop a system to propagate updates we investigate the semantic and spatial relationships between independently produced geographic data sets of the same region (data set integration). The goal of this system is to reduce operator intervention in update operations between corresponding

Mobile Watermarking against Geometrical Distortions

Directory of Open Access Journals (Sweden)

Jing Zhang

2015-08-01

Full Text Available Mobile watermarking robust to geometrical distortions is still a great challenge. In mobile watermarking, efficient computation is necessary because mobile devices have very limited resources due to power consumption. In this paper, we propose a low-complexity geometrically resilient watermarking approach based on the optimal tradeoff circular harmonic function (OTCHF correlation filter and the minimum average correlation energy Mellin radial harmonic (MACE-MRH correlation filter. By the rotation, translation and scale tolerance properties of the two kinds of filter, the proposed watermark detector can be robust to geometrical attacks. The embedded watermark is weighted by a perceptual mask which matches very well with the properties of the human visual system. Before correlation, a whitening process is utilized to improve watermark detection reliability. Experimental results demonstrate that the proposed watermarking approach is computationally efficient and robust to geometrical distortions.

Mixed-Signal Architectures for High-Efficiency and Low-Distortion Digital Audio Processing and Power Amplification

Directory of Open Access Journals (Sweden)

Pierangelo Terreni

2010-01-01

Full Text Available The paper addresses the algorithmic and architectural design of digital input power audio amplifiers. A modelling platform, based on a meet-in-the-middle approach between top-down and bottom-up design strategies, allows a fast but still accurate exploration of the mixed-signal design space. Different amplifier architectures are configured and compared to find optimal trade-offs among different cost-functions: low distortion, high efficiency, low circuit complexity and low sensitivity to parameter changes. A novel amplifier architecture is derived; its prototype implements digital processing IP macrocells (oversampler, interpolating filter, PWM cross-point deriver, noise shaper, multilevel PWM modulator, dead time compensator on a single low-complexity FPGA while off-chip components are used only for the power output stage (LC filter and power MOS bridge; no heatsink is required. The resulting digital input amplifier features a power efficiency higher than 90% and a total harmonic distortion down to 0.13% at power levels of tens of Watts. Discussions towards the full-silicon integration of the mixed-signal amplifier in embedded devices, using BCD technology and targeting power levels of few Watts, are also reported.

Modeling 4f–4f intensity parameters as a function of structural distortions in Ln(2,2′-bipyridine-1,1′-dioxide){sub 4}(ClO{sub 4}){sub 3} complexes (Ln=Pr{sup 3+}, Nd{sup 3+})

Energy Technology Data Exchange (ETDEWEB)

Carneiro, A.N. [Departamento de Química Fundamental, Universidade Federal de Pernambuco-CCEN, Cidade Universitária, Recife-PE 50670-901 (Brazil); Huskowska, E.; Gawryszewska, P. [Faculty of Chemistry, Wroclaw University, 14 F. Joliot-Curie Street, Wroclaw (Poland); Legendziewicz, J., E-mail: janina.legendziewicz@chem.uni.wroc.pl [Faculty of Chemistry, Wroclaw University, 14 F. Joliot-Curie Street, Wroclaw (Poland); Malta, O.L. [Departamento de Química Fundamental, Universidade Federal de Pernambuco-CCEN, Cidade Universitária, Recife-PE 50670-901 (Brazil)

2016-01-15

This work reports on the influence of structural distortions on 4f–4f intensity parameters. These distortions in the first coordination sphere were applied to two complexes with similar structures, Ln(bpyO{sub 2}){sub 4}(ClO{sub 4}){sub 3} (Ln=Pr{sup 3+}, Nd{sup 3+} ions and bpyO{sub 2}=2,2′-bipyridine-1,1′-dioxide). The 4f–4f intensity theory and the PM3/Sparkle model were used. It is concluded that larger distortions are predicted in the case of the Pr complex, and that this point might contribute to the rationalization of the much higher values of the Ω{sub λ} intensity parameters in the Pr complex than in the Nd one. - Highlights: • The influence of structural distortions on 4f–4f intensity parameters was demonstrated for Nd and Pr complexes with 2,2′-bipyridine-1,1′-dioxide.

Reduce blurring and distortion in a projection type virtual image display using integrated small optics

Science.gov (United States)

Hasegawa, Tatsuya; Yendo, Tomohiro

2015-03-01

Head Up Display (HUD) is being applied to automobile. HUD displays information as far virtual image on the windshield. Existing HUD usually displays planar information. If the image corresponding to scenery on the road like Augmented Reality (AR) is displayed on the HUD, driver can efficiently get the information. To actualize this, HUD covering large viewing field is needed. However existing HUD cannot cover large viewing field. Therefore we have proposed system consisting of projector and many small diameter convex lenses. However observed virtual image has blurring and distortion . In this paper, we propose two methods to reduce blurring and distortion of images. First, to reduce blurring of images, distance between each of screen and lens comprised in lens array is adjusted. We inferred from the more distant the lens from center of the array is more blurred that the cause of blurring is curvature of field of lens in the array. Second, to avoid distortion of images, each lens in the array is curved spherically. We inferred from the more distant the lens from center of the array is more distorted that the cause of distortion is incident angle of ray. We confirmed effectiveness of both methods.

The influence of data collection rate, containment size and data smoothing on containment Integrated Leak Rate Tests

International Nuclear Information System (INIS)

Wagner, W.T.; Langan, J.P.; Norris, W.E.; Lurie, D.

1988-01-01

Phase I of a U.S. Nuclear Regulatory Commission contract investigated nuclear power plant Integrated Leak Rate Tests (ILRTs) using data gathered at many domestic and foreign ILRTs. The study evaluated ILRTs with the ANS criteria (in ANSI/ANS-56.8-1987) and the proposed extended ANS criteria (in draft Regulatory Guide, Task MS 021-5, October 1986). The study considered (1) the effects of data collection rates on ILRT conclusions, (2) a possible relationship between containment size, data collection rate and ILRT duration, (3) the impact of the proposed extended ANS methodology on ILRTs, and (4) the influence of data smoothing on ILRT data. The study was performed using 20 sets of Type A and 17 sets of verification data

Metering error quantification under voltage and current waveform distortion

Science.gov (United States)

Wang, Tao; Wang, Jia; Xie, Zhi; Zhang, Ran

2017-09-01

With integration of more and more renewable energies and distortion loads into power grid, the voltage and current waveform distortion results in metering error in the smart meters. Because of the negative effects on the metering accuracy and fairness, it is an important subject to study energy metering combined error. In this paper, after the comparing between metering theoretical value and real recorded value under different meter modes for linear and nonlinear loads, a quantification method of metering mode error is proposed under waveform distortion. Based on the metering and time-division multiplier principles, a quantification method of metering accuracy error is proposed also. Analyzing the mode error and accuracy error, a comprehensive error analysis method is presented which is suitable for new energy and nonlinear loads. The proposed method has been proved by simulation.

Effects of Visual Feedback Distortion on Gait Adaptation: Comparison of Implicit Visual Distortion Versus Conscious Modulation on Retention of Motor Learning.

Science.gov (United States)

Kim, Seung-Jae; Ogilvie, Mitchell; Shimabukuro, Nathan; Stewart, Trevor; Shin, Joon-Ho

2015-09-01

Visual feedback can be used during gait rehabilitation to improve the efficacy of training. We presented a paradigm called visual feedback distortion; the visual representation of step length was manipulated during treadmill walking. Our prior work demonstrated that an implicit distortion of visual feedback of step length entails an unintentional adaptive process in the subjects' spatial gait pattern. Here, we investigated whether the implicit visual feedback distortion, versus conscious correction, promotes efficient locomotor adaptation that relates to greater retention of a task. Thirteen healthy subjects were studied under two conditions: (1) we implicitly distorted the visual representation of their gait symmetry over 14 min, and (2) with help of visual feedback, subjects were told to walk on the treadmill with the intent of attaining the gait asymmetry observed during the first implicit trial. After adaptation, the visual feedback was removed while subjects continued walking normally. Over this 6-min period, retention of preserved asymmetric pattern was assessed. We found that there was a greater retention rate during the implicit distortion trial than that of the visually guided conscious modulation trial. This study highlights the important role of implicit learning in the context of gait rehabilitation by demonstrating that training with implicit visual feedback distortion may produce longer lasting effects. This suggests that using visual feedback distortion could improve the effectiveness of treadmill rehabilitation processes by influencing the retention of motor skills.

Cyclic Symmetry Finite Element Forced Response Analysis of a Distortion-Tolerant Fan with Boundary Layer Ingestion

Science.gov (United States)

Min, J. B.; Reddy, T. S. R.; Bakhle, M. A.; Coroneos, R. M.; Stefko, G. L.; Provenza, A. J.; Duffy, K. P.

2018-01-01

Accurate prediction of the blade vibration stress is required to determine overall durability of fan blade design under Boundary Layer Ingestion (BLI) distorted flow environments. Traditional single blade modeling technique is incapable of representing accurate modeling for the entire rotor blade system subject to complex dynamic loading behaviors and vibrations in distorted flow conditions. A particular objective of our work was to develop a high-fidelity full-rotor aeromechanics analysis capability for a system subjected to a distorted inlet flow by applying cyclic symmetry finite element modeling methodology. This reduction modeling method allows computationally very efficient analysis using a small periodic section of the full rotor blade system. Experimental testing by the use of the 8-foot by 6-foot Supersonic Wind Tunnel Test facility at NASA Glenn Research Center was also carried out for the system designated as the Boundary Layer Ingesting Inlet/Distortion-Tolerant Fan (BLI2DTF) technology development. The results obtained from the present numerical modeling technique were evaluated with those of the wind tunnel experimental test, toward establishing a computationally efficient aeromechanics analysis modeling tool facilitating for analyses of the full rotor blade systems subjected to a distorted inlet flow conditions. Fairly good correlations were achieved hence our computational modeling techniques were fully demonstrated. The analysis result showed that the safety margin requirement set in the BLI2DTF fan blade design provided a sufficient margin with respect to the operating speed range.

Real and complex analysis

CERN Document Server

Apelian, Christopher; Taft, Earl; Nashed, Zuhair

2009-01-01

The Spaces R, Rk, and CThe Real Numbers RThe Real Spaces RkThe Complex Numbers CPoint-Set Topology Bounded SetsClassification of Points Open and Closed SetsNested Intervals and the Bolzano-Weierstrass Theorem Compactness and Connectedness Limits and Convergence Definitions and First Properties Convergence Results for SequencesTopological Results for Sequences Properties of Infinite SeriesManipulations of Series in RFunctions: Definitions and Limits DefinitionsFunctions as MappingsSome Elementary Complex FunctionsLimits of FunctionsFunctions: Continuity and Convergence Continuity Uniform Continuity Sequences and Series of FunctionsThe DerivativeThe Derivative for f: D1 → RThe Derivative for f: Dk → RThe Derivative for f: Dk → RpThe Derivative for f: D → CThe Inverse and Implicit Function TheoremsReal IntegrationThe Integral of f: [a, b] → RProperties of the Riemann Integral Further Development of Integration TheoryVector-Valued and Line IntegralsComplex IntegrationIntroduction to Complex Integrals Fu...

Repairing Canada’s Mining-Tax System to Be Less Distorting and Complex

Directory of Open Access Journals (Sweden)

Duanjie Chen

2013-05-01

Full Text Available The province of Ontario ended its most recent fiscal year with a $12 billion deficit and the Fraser Institute has calculated that the province is in worse financial shape than even the fiscally appalling state of California. One would think that a province so financially debilitated would want to avoid giving unnecessary and wasteful tax breaks to resource companies. Yet, a review of the mining-tax regimes across the country finds that Ontario’s system — specifically its provincial resource allowance, which duplicates the allowances provided by Ottawa that shield miners from risk — is redundant, expensive and wasteful. Ontario is not the only province requiring a modernization of its mining-tax regime. In every province except Nova Scotia and New Brunswick, mining firms enjoy a lower marginal rate for taxes and royalties than for non-resource companies. The inevitable result has been a distortion of investment toward mining projects that might otherwise be economically inefficient. That means that in major oil-producing provinces, such as Alberta, Saskatchewan and Newfoundland, mining investment benefits from larger tax incentives than oil and gas investment. The reasons for favouring the mining of metal over oil are at least unclear and certainly economically unjustifiable. The federal government has already begun making several changes to its tax policies to scale back preferential and irrational inducements for mining investment, including, most recently, reducing accelerated depreciation allowances for certain mining assets and phasing out the corporate Mineral Exploration Tax Credit and the Atlantic Investment Tax Credit for resources. But Ottawa’s efforts to modernize Canada’s mining-tax structure can only go so far, when provinces continue to rely on what are often overly complex tax systems that have a distortionary effect on economic decisions being made by investors. The next step in modernizing Canada’s mining-tax system

Distorted Pattern Recognition and Analysis with the Help of IEf Graph Representation

Directory of Open Access Journals (Sweden)

Adam Sedziwy

2002-01-01

Full Text Available An algorithm for distorted pattern recognition is presented. lt's generalization of M Flasinski results (Pattern Recognition, 27, 1-16, 1992. A new formalism allows to make both qualitative and quantitive distortion analysis. It also enlarges parser flexibility by extending the set of patterns which may be recognized.

Identifying a set of influential spreaders in complex networks

Science.gov (United States)

Zhang, Jian-Xiong; Chen, Duan-Bing; Dong, Qiang; Zhao, Zhi-Dan

2016-06-01

Identifying a set of influential spreaders in complex networks plays a crucial role in effective information spreading. A simple strategy is to choose top-r ranked nodes as spreaders according to influence ranking method such as PageRank, ClusterRank and k-shell decomposition. Besides, some heuristic methods such as hill-climbing, SPIN, degree discount and independent set based are also proposed. However, these approaches suffer from a possibility that some spreaders are so close together that they overlap sphere of influence or time consuming. In this report, we present a simply yet effectively iterative method named VoteRank to identify a set of decentralized spreaders with the best spreading ability. In this approach, all nodes vote in a spreader in each turn, and the voting ability of neighbors of elected spreader will be decreased in subsequent turn. Experimental results on four real networks show that under Susceptible-Infected-Recovered (SIR) and Susceptible-Infected (SI) models, VoteRank outperforms the traditional benchmark methods on both spreading rate and final affected scale. What’s more, VoteRank has superior computational efficiency.

Implementation theory of distortion-invariant pattern recognition for optical and digital signal processing systems

Science.gov (United States)

Lhamon, Michael Earl

A pattern recognition system which uses complex correlation filter banks requires proportionally more computational effort than single-real valued filters. This introduces increased computation burden but also introduces a higher level of parallelism, that common computing platforms fail to identify. As a result, we consider algorithm mapping to both optical and digital processors. For digital implementation, we develop computationally efficient pattern recognition algorithms, referred to as, vector inner product operators that require less computational effort than traditional fast Fourier methods. These algorithms do not need correlation and they map readily onto parallel digital architectures, which imply new architectures for optical processors. These filters exploit circulant-symmetric matrix structures of the training set data representing a variety of distortions. By using the same mathematical basis as with the vector inner product operations, we are able to extend the capabilities of more traditional correlation filtering to what we refer to as "Super Images". These "Super Images" are used to morphologically transform a complicated input scene into a predetermined dot pattern. The orientation of the dot pattern is related to the rotational distortion of the object of interest. The optical implementation of "Super Images" yields feature reduction necessary for using other techniques, such as artificial neural networks. We propose a parallel digital signal processor architecture based on specific pattern recognition algorithms but general enough to be applicable to other similar problems. Such an architecture is classified as a data flow architecture. Instead of mapping an algorithm to an architecture, we propose mapping the DSP architecture to a class of pattern recognition algorithms. Today's optical processing systems have difficulties implementing full complex filter structures. Typically, optical systems (like the 4f correlators) are limited to phase

Review and comparison of geometric distortion correction schemes in MR images used in stereotactic radiosurgery applications

Science.gov (United States)

Pappas, E. P.; Dellios, D.; Seimenis, I.; Moutsatsos, A.; Georgiou, E.; Karaiskos, P.

2017-11-01

In Stereotactic Radiosurgery (SRS), MR-images are widely used for target localization and delineation in order to take advantage of the superior soft tissue contrast they exhibit. However, spatial dose delivery accuracy may be deteriorated due to geometric distortions which are partly attributed to static magnetic field inhomogeneity and patient/object-induced chemical shift and susceptibility related artifacts, known as sequence-dependent distortions. Several post-imaging sequence-dependent distortion correction schemes have been proposed which mainly employ the reversal of read gradient polarity. The scope of this work is to review, evaluate and compare the efficacy of two proposed correction approaches. A specially designed phantom which incorporates 947 control points (CPs) for distortion detection was utilized. The phantom was MR scanned at 1.5T using the head coil and the clinically employed pulse sequence for SRS treatment planning. An additional scan was performed with identical imaging parameters except for reversal of read gradient polarity. In-house MATLAB routines were developed for implementation of the signal integration and average-image distortion correction techniques. The mean CP locations of the two MR scans were regarded as the reference CP distribution. Residual distortion was assessed by comparing the corrected CP locations with corresponding reference positions. Mean absolute distortion on frequency encoding direction was reduced from 0.34mm (original images) to 0.15mm and 0.14mm following application of signal integration and average-image methods, respectively. However, a maximum residual distortion of 0.7mm was still observed for both techniques. The signal integration method relies on the accuracy of edge detection and requires 3-4 hours of post-imaging computational time. The average-image technique is a more efficient (processing time of the order of seconds) and easier to implement method to improve geometric accuracy in such

Market failure, policy failure and other distortions in chronic disease markets

Directory of Open Access Journals (Sweden)

Segal Leonie

2009-06-01

Full Text Available Abstract Background The increasing prevalence of chronic disease represents a significant burden on most health systems. This paper explores the market failures and policy failures that exist in the management of chronic diseases. Discussion There are many sources of market failure in health care that undermine the efficiency of chronic disease management. These include incomplete information as well as information asymmetry between providers and consumers, the effect of externalities on consumer behaviour, and the divergence between social and private time preference rates. This has seen government and policy interventions to address both market failures and distributional issues resulting from the inability of private markets to reach an efficient and equitable distribution of resources. However, these have introduced a series of policy failures such as distorted re-imbursement arrangements across modalities and delivery settings. Summary The paper concludes that market failure resulting from a preference of individuals for 'immediate gratification' in the form of health care and disease management, rather than preventative services, where the benefits are delayed, has a major impact on achieving an efficient allocation of resources in markets for the management of chronic diseases. This distortion is compounded by government health policy that tends to favour medical and pharmaceutical interventions further contributing to distortions in the allocation of resources and inefficiencies in the management of chronic disease.

Holographic measurement of distortion during laser melting: Additive distortion from overlapping pulses

Science.gov (United States)

Haglund, Peter; Frostevarg, Jan; Powell, John; Eriksson, Ingemar; Kaplan, Alexander F. H.

2018-03-01

Laser - material interactions such as welding, heat treatment and thermal bending generate thermal gradients which give rise to thermal stresses and strains which often result in a permanent distortion of the heated object. This paper investigates the thermal distortion response which results from pulsed laser surface melting of a stainless steel sheet. Pulsed holography has been used to accurately monitor, in real time, the out-of-plane distortion of stainless steel samples melted on one face by with both single and multiple laser pulses. It has been shown that surface melting by additional laser pulses increases the out of plane distortion of the sample without significantly increasing the melt depth. The distortion differences between the primary pulse and subsequent pulses has also been analysed for fully and partially overlapping laser pulses.

System performance enhancement with pre-distorted OOFDM signal waveforms in DM/DD systems.

Science.gov (United States)

Sánchez, C; Ortega, B; Capmany, J

2014-03-24

In this work we propose a pre-distortion technique for the mitigation of the nonlinear distortion present in directly modulated/detected OOFDM systems and explore the system performance achieved under varying system parameters. Simulation results show that the proposed pre-distortion technique efficiently mitigates the nonlinear distortion, achieving transmission information rates around 40 Gbits/s and 18.5 Gbits/s over 40 km and 100 km of single mode fiber links, respectively, under optimum operating conditions. Moreover, the proposed pre-distortion technique can potentially provide higher system performance to that obtained with nonlinear equalization at the receiver.

Effects of galvanic distortions on magnetotelluric data: Interpretation ...

Indian Academy of Sciences (India)

R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

But in the case of field data the problem is ... The distorted data set is corrected using the MT response for DRS model and further ... ments, the apparent resistivity and phase at differ- ... from the telluric field, which is of galvanic or inductive ...

Modeling multiple time series annotations as noisy distortions of the ground truth: An Expectation-Maximization approach.

Science.gov (United States)

Gupta, Rahul; Audhkhasi, Kartik; Jacokes, Zach; Rozga, Agata; Narayanan, Shrikanth

2018-01-01

Studies of time-continuous human behavioral phenomena often rely on ratings from multiple annotators. Since the ground truth of the target construct is often latent, the standard practice is to use ad-hoc metrics (such as averaging annotator ratings). Despite being easy to compute, such metrics may not provide accurate representations of the underlying construct. In this paper, we present a novel method for modeling multiple time series annotations over a continuous variable that computes the ground truth by modeling annotator specific distortions. We condition the ground truth on a set of features extracted from the data and further assume that the annotators provide their ratings as modification of the ground truth, with each annotator having specific distortion tendencies. We train the model using an Expectation-Maximization based algorithm and evaluate it on a study involving natural interaction between a child and a psychologist, to predict confidence ratings of the children's smiles. We compare and analyze the model against two baselines where: (i) the ground truth in considered to be framewise mean of ratings from various annotators and, (ii) each annotator is assumed to bear a distinct time delay in annotation and their annotations are aligned before computing the framewise mean.

Studies of radial distortions of the ATLAS Inner Detector

CERN Document Server

The ATLAS collaboration

2018-01-01

The measurement of the absolute momentum scale of charged particles provided by the ATLAS inner detector is affected by biases related to geometrical deformations which are not well constrained by the track-based alignment procedure. The focus of this note is on momentum biases related to radial distortions of the inner detector. The $J/\\psi$, $\\Upsilon$, and $Z$-boson resonances decaying into pairs of muons are used to study and quantify such radial distortions in the barrel region of the inner detector. The analysis is performed on data collected in 2016 during Run 2 of the Large Hadron Collider, and corresponding to 33 fb$^{-1}$ of integrated luminosity.

Multiview Trajectory Mapping Using Homography with Lens Distortion Correction

Directory of Open Access Journals (Sweden)

Andrea Cavallaro

2008-11-01

Full Text Available We present a trajectory mapping algorithm for a distributed camera setting that is based on statistical homography estimation accounting for the distortion introduced by camera lenses. Unlike traditional approaches based on the direct linear transformation (DLT algorithm and singular value decomposition (SVD, the planar homography estimation is derived from renormalization. In addition to this, the algorithm explicitly introduces a correction parameter to account for the nonlinear radial lens distortion, thus improving the accuracy of the transformation. We demonstrate the proposed algorithm by generating mosaics of the observed scenes and by registering the spatial locations of moving objects (trajectories from multiple cameras on the mosaics. Moreover, we objectively compare the transformed trajectories with those obtained by SVD and least mean square (LMS methods on standard datasets and demonstrate the advantages of the renormalization and the lens distortion correction.

Multiview Trajectory Mapping Using Homography with Lens Distortion Correction

Directory of Open Access Journals (Sweden)

Kayumbi Gabin

2008-01-01

Full Text Available Abstract We present a trajectory mapping algorithm for a distributed camera setting that is based on statistical homography estimation accounting for the distortion introduced by camera lenses. Unlike traditional approaches based on the direct linear transformation (DLT algorithm and singular value decomposition (SVD, the planar homography estimation is derived from renormalization. In addition to this, the algorithm explicitly introduces a correction parameter to account for the nonlinear radial lens distortion, thus improving the accuracy of the transformation. We demonstrate the proposed algorithm by generating mosaics of the observed scenes and by registering the spatial locations of moving objects (trajectories from multiple cameras on the mosaics. Moreover, we objectively compare the transformed trajectories with those obtained by SVD and least mean square (LMS methods on standard datasets and demonstrate the advantages of the renormalization and the lens distortion correction.

A novel frame-level constant-distortion bit allocation for smooth H.264/AVC video quality

Science.gov (United States)

Liu, Li; Zhuang, Xinhua

2009-01-01

It is known that quality fluctuation has a major negative effect on visual perception. In previous work, we introduced a constant-distortion bit allocation method [1] for H.263+ encoder. However, the method in [1] can not be adapted to the newest H.264/AVC encoder directly as the well-known chicken-egg dilemma resulted from the rate-distortion optimization (RDO) decision process. To solve this problem, we propose a new two stage constant-distortion bit allocation (CDBA) algorithm with enhanced rate control for H.264/AVC encoder. In stage-1, the algorithm performs RD optimization process with a constant quantization QP. Based on prediction residual signals from stage-1 and target distortion for smooth video quality purpose, the frame-level bit target is allocated by using a close-form approximations of ratedistortion relationship similar to [1], and a fast stage-2 encoding process is performed with enhanced basic unit rate control. Experimental results show that, compared with original rate control algorithm provided by H.264/AVC reference software JM12.1, the proposed constant-distortion frame-level bit allocation scheme reduces quality fluctuation and delivers much smoother PSNR on all testing sequences.

Forecasting of magnitude and duration of currency crises based on the analysis of distortions of fractal scaling in exchange rate fluctuations

Science.gov (United States)

Uritskaya, Olga Y.

2005-05-01

Results of fractal stability analysis of daily exchange rate fluctuations of more than 30 floating currencies for a 10-year period are presented. It is shown for the first time that small- and large-scale dynamical instabilities of national monetary systems correlate with deviations of the detrended fluctuation analysis (DFA) exponent from the value 1.5 predicted by the efficient market hypothesis. The observed dependence is used for classification of long-term stability of floating exchange rates as well as for revealing various forms of distortion of stable currency dynamics prior to large-scale crises. A normal range of DFA exponents consistent with crisis-free long-term exchange rate fluctuations is determined, and several typical scenarios of unstable currency dynamics with DFA exponents fluctuating beyond the normal range are identified. It is shown that monetary crashes are usually preceded by prolonged periods of abnormal (decreased or increased) DFA exponent, with the after-crash exponent tending to the value 1.5 indicating a more reliable exchange rate dynamics. Statistically significant regression relations (R=0.99, pcurrency crises and the degree of distortion of monofractal patterns of exchange rate dynamics are found. It is demonstrated that the parameters of these relations characterizing small- and large-scale crises are nearly equal, which implies a common instability mechanism underlying these events. The obtained dependences have been used as a basic ingredient of a forecasting technique which provided correct in-sample predictions of monetary crisis magnitude and duration over various time scales. The developed technique can be recommended for real-time monitoring of dynamical stability of floating exchange rate systems and creating advanced early-warning-system models for currency crisis prevention.

Complex Pulmonary Aspergilloma: Surgical Challenges in a Third World Setting

Directory of Open Access Journals (Sweden)

Bernadette Ngo Nonga

2018-01-01

Full Text Available Background. Surgery for pulmonary aspergilloma (PA, especially complex forms, is greatly challenging in a resource-poor setting such as Cameroon. We report our experience of surgical management of PA in this environment. Method. We prospectively assessed patients who underwent surgery for PA from January 2012 to May 2015, at the University Hospital Center of Yaoundé. Records were reviewed for demographics, history and physical examinations, radiological findings, surgical procedures, and outcomes. The study has received approval from the institutional ethics committees. Results. In total, 20 patients (17 males and 3 females (sex ratio, 5.66; mean age, 30 years; range, 23–65 years with a past history of tuberculosis were assessed. The median follow-up was 21.5 months. The primary symptom was hemoptysis, followed by cough and chest pain. All patients underwent surgical treatment and lung resection. Postoperative complications (bleeding, air leak, empyema, and severe anemia occurred in 4 patients and 1 patient died. Although 3 patients were lost to follow-up, the survival rate was 80% with improvement of the preoperative symptoms. Conclusion. Although surgery for complex aspergilloma is very challenging in environments such as ours, we believe that it is the best treatment modality for symptomatic diseases in our setting.

Clinicopathogical characteristics and mammographic features of breast cancer showing architectural distortion on a mammogram

International Nuclear Information System (INIS)

Kanzaki, Masao; Hirose, Naoko; Suwa, Kaori; Yoshida, Masayuki; Otuki, Yoshiro; Kobayashi, Hiroshi

2012-01-01

Seven hundred and twenty-seven cases of breast cancer were diagnosed in this clinic between January 2003 and December 2010. Of those, 97 patients who showed architectural distortion on mammography were examined regarding the clinicopathological characteristics and mammographic features. The overall rate of architectural distortion was 13.3%, which became higher with progression of the clinical stage. The rate of lymph node metastasis was 50.5% histologically, and the most common histological type was scirrhous carcinoma at 36.2%, papillotubular carcinoma at 33%, invasive lobular carcinoma at 12.1%, and ductal carcinoma in situ at 11%. Cases of extensive ductal spread beyond the breast quadrant, accompanied by microcalcifications or showing architectural distortion in two views on mammography, were present at significantly high rates. Cases showing architectural distortion in two views on mammography accounted for 66% of the total, and, when these cases were not associated with any other mammographic findings, the most suspected histology of the lesion was invasive lobular carcinoma or carcinoma in situ. (author)

Workstations as consoles for the CERN-PS complex, setting-up the environment

International Nuclear Information System (INIS)

Antonsanti, P.; Arruat, M.; Bouche, J.M.; Cons, L.; Deloose, Y.; Di Maio, F.

1992-01-01

Within the framework of the rejuvenation project of the CERN control systems, commercial workstations have to replace existing home-designed operator consoles. RISC-based workstations with UNIX, X-window TM and OSF/Motif TM have been introduced for the control of the PS complex. The first versions of general functionalities like synoptic display, program selection and control panels have been implemented and the first large scale application has been realized. This paper describes the different components of the workstation environment for the implementation of the applications. The focus is on the set of tools which have been used, developed or integrated, and on how we plan to make them evolve. (author)

Improvement of vector compensation method for vehicle magnetic distortion field

Energy Technology Data Exchange (ETDEWEB)

Pang, Hongfeng, E-mail: panghongfeng@126.com; Zhang, Qi; Li, Ji; Luo, Shitu; Chen, Dixiang; Pan, Mengchun; Luo, Feilu

2014-03-15

Magnetic distortions such as eddy-current field and low frequency magnetic field have not been considered in vector compensation methods. A new compensation method is proposed to suppress these magnetic distortions and improve compensation performance, in which the magnetic distortions related to measurement vectors and time are considered. The experimental system mainly consists of a three-axis fluxgate magnetometer (DM-050), an underwater vehicle and a proton magnetometer, in which the scalar value of magnetic field is obtained with the proton magnetometer and considered to be the true value. Comparing with traditional compensation methods, experimental results show that the magnetic distortions can be further reduced by two times. After compensation, error intensity and RMS error are reduced from 11684.013 nT and 7794.604 nT to 16.219 nT and 5.907 nT respectively. It suggests an effective way to improve the compensation performance of magnetic distortions. - Highlights: • A new vector compensation method is proposed for vehicle magnetic distortion. • The proposed model not only includes magnetometer error but also considers magnetic distortion. • Compensation parameters are computed directly by solving nonlinear equations. • Compared with traditional methods, the proposed method is not related with rotation angle rate. • Error intensity and RMS error can be reduced to 1/2 of the error with traditional methods.

Improvement of vector compensation method for vehicle magnetic distortion field

International Nuclear Information System (INIS)

Pang, Hongfeng; Zhang, Qi; Li, Ji; Luo, Shitu; Chen, Dixiang; Pan, Mengchun; Luo, Feilu

2014-01-01

Magnetic distortions such as eddy-current field and low frequency magnetic field have not been considered in vector compensation methods. A new compensation method is proposed to suppress these magnetic distortions and improve compensation performance, in which the magnetic distortions related to measurement vectors and time are considered. The experimental system mainly consists of a three-axis fluxgate magnetometer (DM-050), an underwater vehicle and a proton magnetometer, in which the scalar value of magnetic field is obtained with the proton magnetometer and considered to be the true value. Comparing with traditional compensation methods, experimental results show that the magnetic distortions can be further reduced by two times. After compensation, error intensity and RMS error are reduced from 11684.013 nT and 7794.604 nT to 16.219 nT and 5.907 nT respectively. It suggests an effective way to improve the compensation performance of magnetic distortions. - Highlights: • A new vector compensation method is proposed for vehicle magnetic distortion. • The proposed model not only includes magnetometer error but also considers magnetic distortion. • Compensation parameters are computed directly by solving nonlinear equations. • Compared with traditional methods, the proposed method is not related with rotation angle rate. • Error intensity and RMS error can be reduced to 1/2 of the error with traditional methods

Everyday value conflicts and integrative complexity of thought.

Science.gov (United States)

Myyry, Liisa

2002-12-01

This study examined the value pluralism model in everyday value conflicts, and the effect of issue context on complexity of thought. According to the cognitive manager model we hypothesized that respondents would obtain a higher level of integrative complexity on personal issues that on professional and general issues. We also explored the relations of integrative complexity to value priorities, measured by the Schwartz Value Survey, and to emotional empathy. The value pluralism model was not supported by the data collected from 126 university students from social science, business and technology. The cognitive manager model was partially confirmed by data from females but not from males. Concerning value priorities, more complex respondents had higher regard for self-transcendence values, and less complex respondents for self-enhancement values Emotional empathy was also significantly related to complexity score.

Limited distortion in LSB steganography

Science.gov (United States)

Kim, Younhee; Duric, Zoran; Richards, Dana

2006-02-01

It is well known that all information hiding methods that modify the least significant bits introduce distortions into the cover objects. Those distortions have been utilized by steganalysis algorithms to detect that the objects had been modified. It has been proposed that only coefficients whose modification does not introduce large distortions should be used for embedding. In this paper we propose an effcient algorithm for information hiding in the LSBs of JPEG coefficients. Our algorithm uses parity coding to choose the coefficients whose modifications introduce minimal additional distortion. We derive the expected value of the additional distortion as a function of the message length and the probability distribution of the JPEG quantization errors of cover images. Our experiments show close agreement between the theoretical prediction and the actual additional distortion.

Grids in topographic maps reduce distortions in the recall of learned object locations.

Science.gov (United States)

Edler, Dennis; Bestgen, Anne-Kathrin; Kuchinke, Lars; Dickmann, Frank

2014-01-01

To date, it has been shown that cognitive map representations based on cartographic visualisations are systematically distorted. The grid is a traditional element of map graphics that has rarely been considered in research on perception-based spatial distortions. Grids do not only support the map reader in finding coordinates or locations of objects, they also provide a systematic structure for clustering visual map information ("spatial chunks"). The aim of this study was to examine whether different cartographic kinds of grids reduce spatial distortions and improve recall memory for object locations. Recall performance was measured as both the percentage of correctly recalled objects (hit rate) and the mean distance errors of correctly recalled objects (spatial accuracy). Different kinds of grids (continuous lines, dashed lines, crosses) were applied to topographic maps. These maps were also varied in their type of characteristic areas (LANDSCAPE) and different information layer compositions (DENSITY) to examine the effects of map complexity. The study involving 144 participants shows that all experimental cartographic factors (GRID, LANDSCAPE, DENSITY) improve recall performance and spatial accuracy of learned object locations. Overlaying a topographic map with a grid significantly reduces the mean distance errors of correctly recalled map objects. The paper includes a discussion of a square grid's usefulness concerning object location memory, independent of whether the grid is clearly visible (continuous or dashed lines) or only indicated by crosses.

42 CFR 413.196 - Notification of changes in rate-setting methodologies and payment rates.

Science.gov (United States)

2010-10-01

... 42 Public Health 2 2010-10-01 2010-10-01 false Notification of changes in rate-setting... NURSING FACILITIES Payment for End-Stage Renal Disease (ESRD) Services and Organ Procurement Costs § 413.196 Notification of changes in rate-setting methodologies and payment rates. Link to an amendment...

Modeling of radial asymmetry in lens distortion facilitated by modern optimization techniques

CSIR Research Space (South Africa)

De Villiers, Johan P

2010-01-18

Full Text Available when applied to low order models. A new tool has been created which can provide extremely accurate distortion characterization. This allows high-end photogrammetric applications to improve their accuracy even if they already use complex models... distortion with a closed form solution and inverse function, Master’s thesis ], University of Pretoria, Pretoria, RSA (2008). [4] Conrady, A., \\Decentered lens systems," Monthly Notices of the Royal Astronomical Society 79, 384{390 (1919). [5] Brown, D...

Impedance Based Analysis of DFIG Stator Current Unbalance and Distortion Suppression Strategies

DEFF Research Database (Denmark)

Song, Yipeng; Zhou, Dao; Blaabjerg, Frede

2016-01-01

The control strategies of Doubly Fed Induction Generator (DFIG) system output current unbalance and distortion suppression have been well investigated in detail, with the implementation of two kinds of resonant regulators, i.e., conventional Resonance (R) regulator or Vector Proportional Integral...... reshaping though the introduction of R and VPI regulator. It is pointed out that, when implemented in the DFIG system output current unbalance and distortion suppression, the VPI regulator (equivalent to the combination of virtual positive inductor and virtual positive resistor) has two advantages over R...... regulator (equivalent to the combination of virtual positive resistor and virtual negative inductor), i.e., better high order harmonic distortion suppression. The theoretical analysis and MATLAB simulation results have validated the correctness of this conclusion....

Evaluation of complex integrated care programmes: the approach in North West London

Science.gov (United States)

Greaves, Felix; Pappas, Yannis; Bardsley, Martin; Harris, Matthew; Curry, Natasha; Holder, Holly; Blunt, Ian; Soljak, Michael; Gunn, Laura; Majeed, Azeem; Car, Josip

2013-01-01

Background Several local attempts to introduce integrated care in the English National Health Service have been tried, with limited success. The Northwest London Integrated Care Pilot attempts to improve the quality of care of the elderly and people with diabetes by providing a novel integration process across primary, secondary and social care organisations. It involves predictive risk modelling, care planning, multidisciplinary management of complex cases and an information technology tool to support information sharing. This paper sets out the evaluation approach adopted to measure its effect. Study design We present a mixed methods evaluation methodology. It includes a quantitative approach measuring changes in service utilization, costs, clinical outcomes and quality of care using routine primary and secondary data sources. It also contains a qualitative component, involving observations, interviews and focus groups with patients and professionals, to understand participant experiences and to understand the pilot within the national policy context. Theory and discussion This study considers the complexity of evaluating a large, multi-organisational intervention in a changing healthcare economy. We locate the evaluation within the theory of evaluation of complex interventions. We present the specific challenges faced by evaluating an intervention of this sort, and the responses made to mitigate against them. Conclusions We hope this broad, dynamic and responsive evaluation will allow us to clarify the contribution of the pilot, and provide a potential model for evaluation of other similar interventions. Because of the priority given to the integrated agenda by governments internationally, the need to develop and improve strong evaluation methodologies remains strikingly important. PMID:23687478

Evaluation of complex integrated care programmes: the approach in North West London

Directory of Open Access Journals (Sweden)

Felix Greaves

2013-03-01

Full Text Available Background: Several local attempts to introduce integrated care in the English National Health Service have been tried, with limited success. The Northwest London Integrated Care Pilot attempts to improve the quality of care of the elderly and people with diabetes by providing a novel integration process across primary, secondary and social care organisations. It involves predictive risk modelling, care planning, multidisciplinary management of complex cases and an information technology tool to support information sharing. This paper sets out the evaluation approach adopted to measure its effect. Study design: We present a mixed methods evaluation methodology. It includes a quantitative approach measuring changes in service utilization, costs, clinical outcomes and quality of care using routine primary and secondary data sources. It also contains a qualitative component, involving observations, interviews and focus groups with patients and professionals, to understand participant experiences and to understand the pilot within the national policy context. Theory and discussion: This study considers the complexity of evaluating a large, multi-organisational intervention in a changing healthcare economy. We locate the evaluation within the theory of evaluation of complex interventions. We present the specific challenges faced by evaluating an intervention of this sort, and the responses made to mitigate against them. Conclusions: We hope this broad, dynamic and responsive evaluation will allow us to clarify the contribution of the pilot, and provide a potential model for evaluation of other similar interventions. Because of the priority given to the integrated agenda by governments internationally, the need to develop and improve strong evaluation methodologies remains strikingly important

Evaluation of complex integrated care programmes: the approach in North West London

Directory of Open Access Journals (Sweden)

Felix Greaves

2013-03-01

Full Text Available Background: Several local attempts to introduce integrated care in the English National Health Service have been tried, with limited success. The Northwest London Integrated Care Pilot attempts to improve the quality of care of the elderly and people with diabetes by providing a novel integration process across primary, secondary and social care organisations. It involves predictive risk modelling, care planning, multidisciplinary management of complex cases and an information technology tool to support information sharing. This paper sets out the evaluation approach adopted to measure its effect.Study design: We present a mixed methods evaluation methodology. It includes a quantitative approach measuring changes in service utilization, costs, clinical outcomes and quality of care using routine primary and secondary data sources. It also contains a qualitative component, involving observations, interviews and focus groups with patients and professionals, to understand participant experiences and to understand the pilot within the national policy context.Theory and discussion: This study considers the complexity of evaluating a large, multi-organisational intervention in a changing healthcare economy. We locate the evaluation within the theory of evaluation of complex interventions. We present the specific challenges faced by evaluating an intervention of this sort, and the responses made to mitigate against them.Conclusions: We hope this broad, dynamic and responsive evaluation will allow us to clarify the contribution of the pilot, and provide a potential model for evaluation of other similar interventions. Because of the priority given to the integrated agenda by governments internationally, the need to develop and improve strong evaluation methodologies remains strikingly important

47 CFR 64.1801 - Geographic rate averaging and rate integration.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 3 2010-10-01 2010-10-01 false Geographic rate averaging and rate integration. 64.1801 Section 64.1801 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES (CONTINUED) MISCELLANEOUS RULES RELATING TO COMMON CARRIERS Geographic Rate Averaging and...

Evaluation of effect of inlet distortion on aerodynamic performance of helium gas compressor for gas turbine high temperature reactor (GTHTR300). Contract research

International Nuclear Information System (INIS)

Takada, Shoji; Takizuka, Takakazu; Yan, Xing; Kurokouchi, Naohiro; Kunitomi, Kazuhiko

2006-02-01

Because the main pipe is connected perpendicular to the flow direction inside the distributing header in the inlet casing of the helium gas compressor design of GTHTR300, the main flow flowing into the header tends to separate from the header wall and to cause reverse flow, which increases flow resistance in the header. This phenomenon increases the total pressure loss in the header and inlet distortion, which is considered to deteriorate the aerodynamic performance of the compressor. Tests were carried out to evaluate the effects of inlet distortion on aerodynamic performance of compressor by using a 1/3-scale helium gas compressor model by varying a level of inlet distortion. Flow was injected from the wall of header to make circumferential velocities uniform before and after the reverse flow region to dissipate the separation and reverse flow. At the design point, inlet distortion was reduced by 2-3% by injection, which resulted in increasing adiabatic efficiency of blade section by 0.5%. A modified flow rate at surge point was lowered from 10.0 kg/s to 9.6 kg/s. At the same time, pressure loss of the inlet casing was reduced by 3-5 kPa, which is equivalent to adiabatic efficiency improvement around 0.8%. By setting orifice at the inlet of the inlet casing, the level of inlet distortion became 3% higher and the adiabatic efficiency of blade section became 1% higher at the design point. The modified flow rate at surge point increased from 10.6 to 10.9 kg/s. A new correlation between inlet distortion and adiabatic efficiency of blade section at the rated flow rate was derived based on compressor-in-parallel model and fitted to the test results. An overall adiabatic efficiency of full-scale compressor was predicted 90.2% based on the test results of efficiency and Reynolds number correlation, which was close to 89.7% that was predicted by test calibrated design through-flow code. (author)

Study of integrated optimization design of wind farm in complex terrain

DEFF Research Database (Denmark)

Xu, Chang; Chen, Dandan; Han, Xingxing

2017-01-01

wind farm design in complex terrain and setting up integrated optimization mathematical model for micro-site selection, power lines and road maintenance design etc.. Based on the existing 1-year wind measurement data in the wind farm area, the genetic algorithm was used to optimize the micro......-site selection. On the basis of location optimization of wind turbine, the optimization algorithms such as single-source shortest path algorithm and minimum spanning tree algorithm were used to optimize electric lines and maintenance roads. The practice shows that the research results can provide important...

Response distortion in personality measurement: born to deceive, yet capable of providing valid self-assessments?

Directory of Open Access Journals (Sweden)

STEPHAN DILCHERT

2006-09-01

Full Text Available This introductory article to the special issue of Psychology Science devoted to the subject of “Considering Response Distortion in Personality Measurement for Industrial, Work and Organizational Psychology Research and Practice” presents an overview of the issues of response distortion in personality measurement. It also provides a summary of the other articles published as part of this special issue addressing social desirability, impression management, self-presentation, response distortion, and faking in personality measurement in industrial, work, and organizational settings.

Integrating and scheduling an open set of static analyses

DEFF Research Database (Denmark)

Eichberg, Michael; Mezini, Mira; Kloppenburg, Sven

2006-01-01

to keep the set of analyses open. We propose an approach to integrating and scheduling an open set of static analyses which decouples the individual analyses and coordinates the analysis executions such that the overall time and space consumption is minimized. The approach has been implemented...... for the Eclipse IDE and has been used to integrate a wide range of analyses such as finding bug patterns, detecting violations of design guidelines, or type system extensions for Java....

Technical Note: Harmonic analysis applied to MR image distortion fields specific to arbitrarily shaped volumes.

Science.gov (United States)

Stanescu, T; Jaffray, D

2018-05-25

sampling points exceeding 1 mm. A novel harmonic analysis approach relying on finite element methods was introduced and validated for multiple volumes with surface shape functions ranging from simple to highly complex. Since a boundary value problem is solved the method requires input data from only the surface of the desired domain of interest. It is believed that the harmonic method will facilitate (a) the design of new phantoms dedicated for the quantification of MR image distortions in large volumes and (b) an integrative approach of combining multiple imaging tests specific to radiotherapy into a single test object for routine imaging quality control. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

A method based on moving least squares for XRII image distortion correction

International Nuclear Information System (INIS)

Yan Shiju; Wang Chengtao; Ye Ming

2007-01-01

This paper presents a novel integrated method to correct geometric distortions of XRII (x-ray image intensifier) images. The method has been compared, in terms of mean-squared residual error measured at control and intermediate points, with two traditional local methods and a traditional global methods. The proposed method is based on the methods of moving least squares (MLS) and polynomial fitting. Extensive experiments were performed on simulated and real XRII images. In simulation, the effect of pincushion distortion, sigmoidal distortion, local distortion, noise, and the number of control points was tested. The traditional local methods were sensitive to pincushion and sigmoidal distortion. The traditional global method was only sensitive to sigmoidal distortion. The proposed method was found neither sensitive to pincushion distortion nor sensitive to sigmoidal distortion. The sensitivity of the proposed method to local distortion was lower than or comparable with that of the traditional global method. The sensitivity of the proposed method to noise was higher than that of all three traditional methods. Nevertheless, provided the standard deviation of noise was not greater than 0.1 pixels, accuracy of the proposed method is still higher than the traditional methods. The sensitivity of the proposed method to the number of control points was greatly lower than that of the traditional methods. Provided that a proper cutoff radius is chosen, accuracy of the proposed method is higher than that of the traditional methods. Experiments on real images, carried out by using a 9 in. XRII, showed that residual error of the proposed method (0.2544±0.2479 pixels) is lower than that of the traditional global method (0.4223±0.3879 pixels) and local methods (0.4555±0.3518 pixels and 0.3696±0.4019 pixels, respectively)

Evaluation of the distortion rate of panoramic and peri apical radiographs in erupted third molar inclination

International Nuclear Information System (INIS)

Ezoddini Ardakani, F.; Zangouie Booshehri, M.; Behniafar, B.

2011-01-01

Panoramic and peri apical radiographs are normally used in impacted third molar teeth surgeries. The aim of the present study was to evaluate and compare the distortion of the erupted third molar teeth on panoramic and peri apical radiographs. Patients and Methods: A total of 44 radiographs were obtained of 22 patients (age range, 18-24 years) referred to the faculty of dentistry for orthodontic treatment. A plaster cast was prepared and panoramic radiography was taken for all patients to plan the orthodontic treatment and peri apical radiography was taken for investigation of tooth structure details. Therefore, a total of 66 views and samples were studied by two methods: 1) Measuring the angle between the longitudinal plane of the third molar and occlusal plane. 2) Measuring the angle between the longitudinal plane of second and third molar. Finally, 132 records were evaluated by one individual. Results: There was no significant statistical difference between the mean position of the third molar on panoramic, peri apical radiographs and the casts. However, measurements of the third molars on peri apical radiographs were slightly closer to the measurements of the casts compared to the panoramic radiographs. Conclusion: Distortion does not have a specific effect on the diagnosis of the position of the third erupted molars by peri apical or panoramic radiographs, though various studies have shown that these radiographs have an amount of distortion and peri apical radiographical distortion is less than that in panoramic radiography.

Effects of aspirin on distortion product fine structure: interpreted by the two-source model for distortion product otoacoustic emissions generation.

Science.gov (United States)

Rao, Aparna; Long, Glenis R

2011-02-01

Distortion product otoacoustic emission (DPOAE) fine structure is due to the interaction of two major components coming from different places in the cochlea. One component is generated from the region of maximal overlap of the traveling waves generated by the two primaries and is attributed to nonlinear distortion (nonlinear component). The other component arises predominantly from the tonotopic region of the distortion product and is attributed to linear coherent reflection (reflection component). Aspirin (salicylate) ototoxicity can cause reversible hearing loss and reduces otoacoustic emission generation in the cochlea. The two components are expected to be affected differentially by cochlear health. Changes in DPOAE fine structure were recorded longitudinally in three subjects before, during, and after aspirin consumption. Full data sets were analyzed for two subjects, but only partial data could be analyzed from the third subject. Resulting changes in the two components of DPOAE fine structure revealed variability among subjects and differential effects on the two components. For low-intensity primaries, both components were reduced with the reflection component being more vulnerable. For high-intensity primaries, the nonlinear component showed little or no change, but the reflection component was always reduced.

Rules versus Discretion in Loan Rate Setting

NARCIS (Netherlands)

Cerqueiro, G.M.; Degryse, H.A.; Ongena, S.

2007-01-01

We propose a heteroscedastic regression model to identify the determinants of the dispersion in interest rates on loans granted to small and medium sized enterprises. We interpret unexplained deviations as evidence of the banks’ discretionary use of market power in the loan rate setting process.

Cognitive distortions and gambling near-misses in Internet Gaming Disorder: A preliminary study.

Directory of Open Access Journals (Sweden)

Yin Wu

Full Text Available Increased cognitive distortions (i.e. biased processing of chance, probability and skill are a key psychopathological process in disordered gambling. The present study investigated state and trait aspects of cognitive distortions in 22 individuals with Internet Gaming Disorder (IGD and 22 healthy controls. Participants completed the Gambling Related Cognitions Scale as a trait measure of cognitive distortions, and played a slot machine task delivering wins, near-misses and full-misses. Ratings of pleasure ("liking" and motivation to play ("wanting" were taken following the different outcomes, and gambling persistence was measured after a mandatory phase. IGD was associated with elevated trait cognitive distortions, in particular skill-oriented cognitions. On the slot machine task, the IGD group showed increased "wanting" ratings compared with control participants, while the two groups did not differ regarding their "liking" of the game. The IGD group displayed increased persistence on the slot machine task. Near-miss outcomes did not elicit stronger motivation to play compared to full-miss outcomes overall, and there was no group difference on this measure. However, a near-miss position effect was observed, such that near-misses stopping before the payline were rated as more motivating than near-misses that stopped after the payline, and this differentiation was attenuated in the IGD group, suggesting possible counterfactual thinking deficits in this group. These data provide preliminary evidence for increased incentive motivation and cognitive distortions in IGD, at least in the context of a chance-based gambling environment.

Cognitive distortions and gambling near-misses in Internet Gaming Disorder: A preliminary study.

Science.gov (United States)

Wu, Yin; Sescousse, Guillaume; Yu, Hongbo; Clark, Luke; Li, Hong

2018-01-01

Increased cognitive distortions (i.e. biased processing of chance, probability and skill) are a key psychopathological process in disordered gambling. The present study investigated state and trait aspects of cognitive distortions in 22 individuals with Internet Gaming Disorder (IGD) and 22 healthy controls. Participants completed the Gambling Related Cognitions Scale as a trait measure of cognitive distortions, and played a slot machine task delivering wins, near-misses and full-misses. Ratings of pleasure ("liking") and motivation to play ("wanting") were taken following the different outcomes, and gambling persistence was measured after a mandatory phase. IGD was associated with elevated trait cognitive distortions, in particular skill-oriented cognitions. On the slot machine task, the IGD group showed increased "wanting" ratings compared with control participants, while the two groups did not differ regarding their "liking" of the game. The IGD group displayed increased persistence on the slot machine task. Near-miss outcomes did not elicit stronger motivation to play compared to full-miss outcomes overall, and there was no group difference on this measure. However, a near-miss position effect was observed, such that near-misses stopping before the payline were rated as more motivating than near-misses that stopped after the payline, and this differentiation was attenuated in the IGD group, suggesting possible counterfactual thinking deficits in this group. These data provide preliminary evidence for increased incentive motivation and cognitive distortions in IGD, at least in the context of a chance-based gambling environment.

Jet Engine Fan Response to Inlet Distortions Generated by Ingesting Boundary Layer Flow

Science.gov (United States)

Giuliani, James Edward

Future civil transport designs may incorporate engines integrated into the body of the aircraft to take advantage of efficiency increases due to weight and drag reduction. Additional increases in engine efficiency are predicted if the inlets ingest the lower momentum boundary layer flow that develops along the surface of the aircraft. Previous studies have shown, however, that the efficiency benefits of Boundary Layer Ingesting (BLI) inlets are very sensitive to the magnitude of fan and duct losses, and blade structural response to the non-uniform flow field that results from a BLI inlet has not been studied in-depth. This project represents an effort to extend the modeling capabilities of TURBO, an existing rotating turbomachinery unsteady analysis code, to include the ability to solve the external and internal flow fields of a BLI inlet. The TURBO code has been a successful tool in evaluating fan response to flow distortions for traditional engine/inlet integrations. Extending TURBO to simulate the external and inlet flow field upstream of the fan will allow accurate pressure distortions that result from BLI inlet configurations to be computed and used to analyze fan aerodynamics and structural response. To validate the modifications for the BLI inlet flow field, an experimental NASA project to study flush-mounted S-duct inlets with large amounts of boundary layer ingestion was modeled. Results for the flow upstream and in the inlet are presented and compared to experimental data for several high Reynolds number flows to validate the modifications to the solver. Once the inlet modifications were validated, a hypothetical compressor fan was connected to the inlet, matching the inlet operating conditions so that the effect on the distortion could be evaluated. Although the total pressure distortion upstream of the fan was symmetrical for this geometry, the pressure rise generated by the fan blades was not, because of the velocity non-uniformity of the distortion

Analysis of Brown camera distortion model

Science.gov (United States)

Nowakowski, Artur; Skarbek, Władysław

2013-10-01

Contemporary image acquisition devices introduce optical distortion into image. It results in pixel displacement and therefore needs to be compensated for many computer vision applications. The distortion is usually modeled by the Brown distortion model, which parameters can be included in camera calibration task. In this paper we describe original model, its dependencies and analyze orthogonality with regard to radius for its decentering distortion component. We also report experiments with camera calibration algorithm included in OpenCV library, especially a stability of distortion parameters estimation is evaluated.

Weld distortion prediction and control of the ITER vacuum vessel manufacturing mock-ups

International Nuclear Information System (INIS)

Ottolini, Marco; Barbensi, Andrea

2014-01-01

The fabrication of the ITER Vacuum Vessel Sectors is an unprecedented challenge, due to their dimensions, the close tolerances, the complex 'D' shape. The technological issues were faced by the production of full scale mock ups to confirm the manufacturing feasibility to achieve very tight tolerances and qualify the main manufacturing processes, by a step by step welding distortion control, by the qualification of not conventional NDT inspection techniques and by innovative 3D dimensional inspections. The Supplier is required to fabricate at least two mock ups, inboard and outboard, related to the manufacturing method of the VV Sectors, to demonstrate the control of the welding distortions to achieve tolerances, optimizing welding sequences and calibrating of welding distortions computer simulations. The stages of this preparatory activity are: prediction of welding distortion for fabrication mock ups representative of selected segments; demonstration that distortion predictions are consistent with experimental results from 3D dimensional inspection; understanding of reasons of possible deviations between numerical and experimental results and definition of action to solve these issues; demonstration that possible calculation simplifications, adopted to speed up the analysis process, do not affect significantly the welding distortion prediction. This paper describes the weld distortion prediction and control on the manufacturing mock-ups of ITER Vacuum Vessel Sectors, with particular emphasis to the lessons learned. (authors)

Experiences in integrated leak rate measurements

International Nuclear Information System (INIS)

Shirk, R.E.

1982-01-01

During a hypothetical design basis accident for nuclear power plants, the reactor containment system is relied upon to maintain radioactive exposure limits below acceptable limits. Integrated leak rate testing is a means of verifying that the leakage of radioactivity material from the reactor containment will be below allowable limits. Leakage rate computations are based on the ideal gas law. The absolute method of leakage rate testing utilizing mass point method of data analysis is recommended. Integrated leak rate testing data is obtained from pressure, drybulb temperature, dewpoint temperature, and flow measuring systems. Test data does not support the usual leakage (flow) - pressure square root relationship. The major source of potential leakage from the reactor containment is reactor containment isolation valves

Correcting geometric and photometric distortion of document images on a smartphone

Science.gov (United States)

Simon, Christian; Williem; Park, In Kyu

2015-01-01

A set of document image processing algorithms for improving the optical character recognition (OCR) capability of smartphone applications is presented. The scope of the problem covers the geometric and photometric distortion correction of document images. The proposed framework was developed to satisfy industrial requirements. It is implemented on an off-the-shelf smartphone with limited resources in terms of speed and memory. Geometric distortions, i.e., skew and perspective distortion, are corrected by sending horizontal and vertical vanishing points toward infinity in a downsampled image. Photometric distortion includes image degradation from moiré pattern noise and specular highlights. Moiré pattern noise is removed using low-pass filters with different sizes independently applied to the background and text region. The contrast of the text in a specular highlighted area is enhanced by locally enlarging the intensity difference between the background and text while the noise is suppressed. Intensive experiments indicate that the proposed methods show a consistent and robust performance on a smartphone with a runtime of less than 1 s.

Quality Evaluation and Nonuniform Compression of Geometrically Distorted Images Using the Quadtree Distortion Map

Directory of Open Access Journals (Sweden)

Cristina Costa

2004-09-01

Full Text Available The paper presents an analysis of the effects of lossy compression algorithms applied to images affected by geometrical distortion. It will be shown that the encoding-decoding process results in a nonhomogeneous image degradation in the geometrically corrected image, due to the different amount of information associated to each pixel. A distortion measure named quadtree distortion map (QDM able to quantify this aspect is proposed. Furthermore, QDM is exploited to achieve adaptive compression of geometrically distorted pictures, in order to ensure a uniform quality on the final image. Tests are performed using JPEG and JPEG2000 coding standards in order to quantitatively and qualitatively assess the performance of the proposed method.

Cognitive Distortions, Humor Styles, and Depression.

Science.gov (United States)

Rnic, Katerina; Dozois, David J A; Martin, Rod A

2016-08-01

Cognitive distortions are negative biases in thinking that are theorized to represent vulnerability factors for depression and dysphoria. Despite the emphasis placed on cognitive distortions in the context of cognitive behavioural theory and practice, a paucity of research has examined the mechanisms through which they impact depressive symptomatology. Both adaptive and maladaptive styles of humor represent coping strategies that may mediate the relation between cognitive distortions and depressive symptoms. The current study examined the correlations between the frequency and impact of cognitive distortions across both social and achievement-related contexts and types of humor. Cognitive distortions were associated with reduced use of adaptive Affiliative and Self-Enhancing humor styles and increased use of maladaptive Aggressive and Self-Defeating humor. Reduced use of Self-Enhancing humor mediated the relationship between most types of cognitive distortions and depressed mood, indicating that distorted negative thinking may interfere with an individual's ability to adopt a humorous and cheerful outlook on life (i.e., use Self-Enhancing humor) as a way of regulating emotions and coping with stress, thereby resulting in elevated depressive symptoms. Similarly, Self-Defeating humor mediated the association of the social impact of cognitive distortions with depression, such that this humor style may be used as a coping strategy for dealing with distorted thinking that ultimately backfires and results in increased dysphoria.

PoCos: Population Covering Locus Sets for Risk Assessment in Complex Diseases.

Directory of Open Access Journals (Sweden)

Marzieh Ayati

2016-11-01

Full Text Available Susceptibility loci identified by GWAS generally account for a limited fraction of heritability. Predictive models based on identified loci also have modest success in risk assessment and therefore are of limited practical use. Many methods have been developed to overcome these limitations by incorporating prior biological knowledge. However, most of the information utilized by these methods is at the level of genes, limiting analyses to variants that are in or proximate to coding regions. We propose a new method that integrates protein protein interaction (PPI as well as expression quantitative trait loci (eQTL data to identify sets of functionally related loci that are collectively associated with a trait of interest. We call such sets of loci "population covering locus sets" (PoCos. The contributions of the proposed approach are three-fold: 1 We consider all possible genotype models for each locus, thereby enabling identification of combinatorial relationships between multiple loci. 2 We develop a framework for the integration of PPI and eQTL into a heterogenous network model, enabling efficient identification of functionally related variants that are associated with the disease. 3 We develop a novel method to integrate the genotypes of multiple loci in a PoCo into a representative genotype to be used in risk assessment. We test the proposed framework in the context of risk assessment for seven complex diseases, type 1 diabetes (T1D, type 2 diabetes (T2D, psoriasis (PS, bipolar disorder (BD, coronary artery disease (CAD, hypertension (HT, and multiple sclerosis (MS. Our results show that the proposed method significantly outperforms individual variant based risk assessment models as well as the state-of-the-art polygenic score. We also show that incorporation of eQTL data improves the performance of identified POCOs in risk assessment. We also assess the biological relevance of PoCos for three diseases that have similar biological mechanisms

Lattice Distortion Mediated Paramagnetic Relaxation in High-Spin High-Symmetry Molecular Magnets

Science.gov (United States)

Garg, Anupam

1998-08-01

Field-dependent maxima in the relaxation rate of the magnetic molecules Mn12-Ac and Fe8-tacn have commonly been ascribed to some resonant tunneling phenomena. We argue instead that the relaxation is purely due to phonons. The rate maxima arise because of a Jahn-Teller-like distortion caused by the coupling of phonons to degenerate Zeeman levels of the molecule at the top of the barrier. The binding energy of the distorted intermediate states lowers the barrier height and increases the relaxation rate. A nonperturbative calculation of this effect is carried out for a model system. An approximate result for the field variation near a maximum is found to agree reasonably with experiment.

Distortion Control during Welding

NARCIS (Netherlands)

Akbari Pazooki, A.M.

2014-01-01

The local material expansion and contraction involved in welding result in permanent deformations or instability i.e., welding distortion. Considerable efforts have been made in controlling welding distortion prior to, during or after welding. Thermal Tensioning (TT) describes a group of in-situ

TPC track distortions IV: post tenebras lux

CERN Document Server

Ammosov, V; Boyko, I; Chelkov, G; Dedovitch, D; Dydak, F; Elagin, A; Gostkin, M; Guskov, A; Koreshev, V; Krumshtein, Z; Nefedov, Y; Nikolaev, K; Wotschack, J; Zhemchugov, A

2007-01-01

We present a comprehensive discussion and summary of static and dynamic track distortions in the HARP TPC in terms of physical origin, mathematical modelling and correction algorithms. `Static' distortions are constant with time, while `dynamic' distortions are distortions that occur only during the 400 ms long accelerator spill. The measurement of dynamic distortions, their mathematical modelling and the correction algorithms build on our understanding of static distortions. In the course of corroborating the validity of our static distortion corrections, their reliability and precision was further improved. Dynamic TPC distortions originate dominantly from the `stalactite' effect: a column of positive-ion charge starts growing at the begin of the accelerator spill, and continues growing with nearly constant velocity out from the sense-wire plane into the active TPC volume. However, the `stalactite' effect is not able to describe the distortions that are present already at the start of the spill and which ha...

Studying the Complex Expression Dependences between Sets of Coexpressed Genes

Directory of Open Access Journals (Sweden)

Mario Huerta

2014-01-01

Full Text Available Organisms simplify the orchestration of gene expression by coregulating genes whose products function together in the cell. The use of clustering methods to obtain sets of coexpressed genes from expression arrays is very common; nevertheless there are no appropriate tools to study the expression networks among these sets of coexpressed genes. The aim of the developed tools is to allow studying the complex expression dependences that exist between sets of coexpressed genes. For this purpose, we start detecting the nonlinear expression relationships between pairs of genes, plus the coexpressed genes. Next, we form networks among sets of coexpressed genes that maintain nonlinear expression dependences between all of them. The expression relationship between the sets of coexpressed genes is defined by the expression relationship between the skeletons of these sets, where this skeleton represents the coexpressed genes with a well-defined nonlinear expression relationship with the skeleton of the other sets. As a result, we can study the nonlinear expression relationships between a target gene and other sets of coexpressed genes, or start the study from the skeleton of the sets, to study the complex relationships of activation and deactivation between the sets of coexpressed genes that carry out the different cellular processes present in the expression experiments.

Integrating total quality management in a library setting

CERN Document Server

Jurow, Susan

2013-01-01

Improve the delivery of library services by implementing total quality management (TQM), a system of continuous improvement employing participative management and centered on the needs of customers. Although TQM was originally designed for and successfully applied in business and manufacturing settings, this groundbreaking volume introduces strategies for translating TQM principles from the profit-based manufacturing sector to the library setting. Integrating Total Quality Management in a Library Setting shows librarians how to improve library services by implementing strategies such as employ

Optimal regional biases in ECB interest rate setting

NARCIS (Netherlands)

Arnold, I.J.M.

2005-01-01

This paper uses a simple model of optimal monetary policy to consider whether the influence of national output and inflation rates on ECB interest rate setting should equal a country’s weight in the eurozone economy. The findings depend on assumptions regarding interest rate elasticities, exchange

Complexity rating of abnormal events and operator performance

International Nuclear Information System (INIS)

Oeivind Braarud, Per

1998-01-01

The complexity of the work situation during abnormal situations is a major topic in a discussion of safety aspects of Nuclear Power plants. An understanding of complexity and its impact on operator performance in abnormal situations is important. One way to enhance understanding is to look at the dimensions that constitute complexity for NPP operators, and how those dimensions can be measured. A further step is to study how dimensions of complexity of the event are related to performance of operators. One aspect of complexity is the operator 's subjective experience of given difficulties of the event. Another related aspect of complexity is subject matter experts ratings of the complexity of the event. A definition and a measure of this part of complexity are being investigated at the OECD Halden Reactor Project in Norway. This paper focus on the results from a study of simulated scenarios carried out in the Halden Man-Machine Laboratory, which is a full scope PWR simulator. Six crews of two licensed operators each performed in 16 scenarios (simulated events). Before the experiment subject matter experts rated the complexity of the scenarios, using a Complexity Profiling Questionnaire. The Complexity Profiling Questionnaire contains eight previously identified dimensions associated with complexity. After completing the scenarios the operators received a questionnaire containing 39 questions about perceived complexity. This questionnaire was used for development of a measure of subjective complexity. The results from the study indicated that Process experts' rating of scenario complexity, using the Complexity Profiling Questionnaire, were able to predict crew performance quite well. The results further indicated that a measure of subjective complexity could be developed that was related to crew performance. Subjective complexity was found to be related to subjective work load. (author)

Distortion-Free 1-Bit PWM Coding for Digital Audio Signals

Directory of Open Access Journals (Sweden)

John Mourjopoulos

2007-01-01

Full Text Available Although uniformly sampled pulse width modulation (UPWM represents a very efficient digital audio coding scheme for digital-to-analog conversion and full-digital amplification, it suffers from strong harmonic distortions, as opposed to benign non-harmonic artifacts present in analog PWM (naturally sampled PWM, NPWM. Complete elimination of these distortions usually requires excessive oversampling of the source PCM audio signal, which results to impractical realizations of digital PWM systems. In this paper, a description of digital PWM distortion generation mechanism is given and a novel principle for their minimization is proposed, based on a process having some similarity to the dithering principle employed in multibit signal quantization. This conditioning signal is termed “jither” and it can be applied either in the PCM amplitude or the PWM time domain. It is shown that the proposed method achieves significant decrement of the harmonic distortions, rendering digital PWM performance equivalent to that of source PCM audio, for mild oversampling (e.g., ×4 resulting to typical PWM clock rates of 90 MHz.

Distortion-Free 1-Bit PWM Coding for Digital Audio Signals

Directory of Open Access Journals (Sweden)

Mourjopoulos John

2007-01-01

Full Text Available Although uniformly sampled pulse width modulation (UPWM represents a very efficient digital audio coding scheme for digital-to-analog conversion and full-digital amplification, it suffers from strong harmonic distortions, as opposed to benign non-harmonic artifacts present in analog PWM (naturally sampled PWM, NPWM. Complete elimination of these distortions usually requires excessive oversampling of the source PCM audio signal, which results to impractical realizations of digital PWM systems. In this paper, a description of digital PWM distortion generation mechanism is given and a novel principle for their minimization is proposed, based on a process having some similarity to the dithering principle employed in multibit signal quantization. This conditioning signal is termed "jither" and it can be applied either in the PCM amplitude or the PWM time domain. It is shown that the proposed method achieves significant decrement of the harmonic distortions, rendering digital PWM performance equivalent to that of source PCM audio, for mild oversampling (e.g., resulting to typical PWM clock rates of 90 MHz.

Frequency modulation television analysis: Distortion analysis

Science.gov (United States)

Hodge, W. H.; Wong, W. H.

1973-01-01

Computer simulation is used to calculate the time-domain waveform of standard T-pulse-and-bar test signal distorted in passing through an FM television system. The simulator includes flat or preemphasized systems and requires specification of the RF predetection filter characteristics. The predetection filters are modeled with frequency-symmetric Chebyshev (0.1-db ripple) and Butterworth filters. The computer was used to calculate distorted output signals for sixty-four different specified systems, and the output waveforms are plotted for all sixty-four. Comparison of the plotted graphs indicates that a Chebyshev predetection filter of four poles causes slightly more signal distortion than a corresponding Butterworth filter and the signal distortion increases as the number of poles increases. An increase in the peak deviation also increases signal distortion. Distortion also increases with the addition of preemphasis.

Welding distortion control in double walled KSTAR vacuum vessel fabrication

International Nuclear Information System (INIS)

Oh, D. W.; Lee, G. T.; Kim, H. K.; Yang, H. L.; Bak, J. S.

2004-01-01

The KSTAR(Korea Superconducting Tokamak Advanced Research) vacuum vessel is designed to be a double walled structure made of 12mm thick 316LN stainless steel with a D shaped cross-section about 4 m height. Vacuum vessel was pre-fabricated in two parts, 180 degree and 157.5 degree sectors in toroidal direction to meet the transportation purpose. These two parts have to be welded on site with ±2mm allowable fabrication tolerances. 1/3 scaled mock-up model was used to estimate the welding distortion and to ensure the weld quality of vacuum vessel. Gas Tungsten Arc Welding(GTAW), which has been approved by procedure qualification test, was used during mock-up test and vacuum vessel site fabrication. Welding distortion could be managed by allowing for distortion in opposite direction, by applying high restraint using lots of strong backs, by controlling the welding heat input with symmetrical welding sequence. The integrity of the site welding joint was assured by radiographic test, ultrasonic test and leak test with helium detecting method

Characterization of tissue magnetic susceptibility-induced distortions for MRIgRT

International Nuclear Information System (INIS)

Stanescu, T.; Wachowicz, K.; Jaffray, D. A.

2012-01-01

Purpose: MR image geometric integrity is one of the building blocks of MRI-guided radiotherapy. In particular, tissue magnetic susceptibility-induced effects are patient-dependent and their behavior is difficult to assess and predict. In this study, the authors investigated in detail the characteristics of susceptibility (χ) distortions in the context of MRIgRT, including the case of two common MR-linac system configurations. Methods: The magnetic field distortions were numerically simulated for several imaging parameters and anatomical sites, i.e., brain, lung, pelvis (with air pockets), and prostate. The simulation process consisted of (a) segmentation of patient CT data into susceptibility relevant anatomical volumes (i.e., soft-tissue, bone and air/lung), (b) conversion of CT data into susceptibility masks by assigning bulk χ values to the structures defined at (a), (c) numerical computations of the local magnetic fields by using a finite difference algorithm, and (d) generation of the geometric distortion maps from the magnetic field distributions. For each patient anatomy, the distortions were quantified at the interfaces of anatomical structures with significantly different χ values. The analysis was performed for two specific orientations of the external main magnetic field (B 0 ) characteristic to the MR-linac systems, specifically along the z-axis for a bore MR scanner and in the (x,y)-plane for a biplanner magnet. The magnetic field local perturbations were reported in ppm. The metrics used to quantify the geometric distortions were the maximum, mean, and range of distortions. The numerical simulation algorithm was validated using phantom data measurements. Results: Susceptibility-induced distortions were determined for both quadratic and patient specific geometries. The numerical simulations showed a good agreement with the experimental data. The measurements were acquired at 1.5 and 3 T and with an encoding gradient varying between 3 and 20 mT/m by

Characterization of tissue magnetic susceptibility-induced distortions for MRIgRT.

Science.gov (United States)

Stanescu, T; Wachowicz, K; Jaffray, D A

2012-12-01

MR image geometric integrity is one of the building blocks of MRI-guided radiotherapy. In particular, tissue magnetic susceptibility-induced effects are patient-dependent and their behavior is difficult to assess and predict. In this study, the authors investigated in detail the characteristics of susceptibility (χ) distortions in the context of MRIgRT, including the case of two common MR-linac system configurations. The magnetic field distortions were numerically simulated for several imaging parameters and anatomical sites, i.e., brain, lung, pelvis (with air pockets), and prostate. The simulation process consisted of (a) segmentation of patient CT data into susceptibility relevant anatomical volumes (i.e., soft-tissue, bone and air∕lung), (b) conversion of CT data into susceptibility masks by assigning bulk χ values to the structures defined at (a), (c) numerical computations of the local magnetic fields by using a finite difference algorithm, and (d) generation of the geometric distortion maps from the magnetic field distributions. For each patient anatomy, the distortions were quantified at the interfaces of anatomical structures with significantly different χ values. The analysis was performed for two specific orientations of the external main magnetic field (B(0)) characteristic to the MR-linac systems, specifically along the z-axis for a bore MR scanner and in the (x,y)-plane for a biplanner magnet. The magnetic field local perturbations were reported in ppm. The metrics used to quantify the geometric distortions were the maximum, mean, and range of distortions. The numerical simulation algorithm was validated using phantom data measurements. Susceptibility-induced distortions were determined for both quadratic and patient specific geometries. The numerical simulations showed a good agreement with the experimental data. The measurements were acquired at 1.5 and 3 T and with an encoding gradient varying between 3 and 20 mT∕m by using an annular

Evaluation of integrated data sets: four examples

International Nuclear Information System (INIS)

Bolivar, S.L.; Freeman, S.B.; Weaver, T.A.

1982-01-01

Several large data sets have been integrated and utilized for rapid evaluation on a reconnaissance scale for the Montrose 1 0 x 2 0 quadrangle, Colorado. The data sets include Landsat imagery, hydrogeochemical and stream sediment analyses, airborne geophysical data, known mineral occurrences, and a geologic map. All data sets were registered to a 179 x 119 rectangular grid and projected onto Universal Transverse Mercator coordinates. A grid resolution of 1 km was used. All possible combinations of three, for most data sets, were examined for general geologic correlations by utilizing a color microfilm output. In addition, gray-level pictures of statistical output, e.g., factor analysis, have been employed to aid evaluations. Examples for the data sets dysprosium-calcium, lead-copper-zinc, and equivalent uranium-uranium in water-uranium in sediment are described with respect to geologic applications, base-metal regimes, and geochemical associations

Can components in distortion-product otoacoustic emissions be separated?

DEFF Research Database (Denmark)

Christensen, Anders Tornvig; W. Purcell, David; Christensen, Flemming

2012-01-01

Otoacoustic emissions are signals emitted from the cochlea, either spontaneously or evoked by stimuli. Measured with an acoustic probe sealed in the ear-canal, they reveal information about a part of the mechanism of hearing that is otherwise inaccessible. Outer hair cells in the cochlea work...... to improve hearing sensitivity by means of nonlinear amplification, which produces distortion. In the measurement of otoacoustic emissions, two tones can be delivered to the cochlea to invoke this nonlinearity and elicit the distortion-product otoacoustic emission (DPOAE). DPOAEs arise mainly from two...... spatially separated generation mechanisms, thus making interpretation of DPOAE measurements complicated. In this study, we test whether or not source separation by group delays is equivalent to separation by time delays – either result is equally interesting to understand given the complexity of the cochlea...

Distorting the ceramic familiar: materiality and non-ceramic intervention, Conference, Keramik Museum, Germany

OpenAIRE

Livingstone, Andrew

2009-01-01

Invited conference speaker, Westerwald Keramik Museum, August 2009. Paper title: Distorting the ceramic familiar: materiality and non-ceramic intervention.\\ud \\ud This paper will examine the integration of non-ceramic media into the discourse of ceramics.

Generic distortion model for metrology under optical microscopes

Science.gov (United States)

Liu, Xingjian; Li, Zhongwei; Zhong, Kai; Chao, YuhJin; Miraldo, Pedro; Shi, Yusheng

2018-04-01

For metrology under optical microscopes, lens distortion is the dominant source of error. Previous distortion models and correction methods mostly rely on the assumption that parametric distortion models require a priori knowledge of the microscopes' lens systems. However, because of the numerous optical elements in a microscope, distortions can be hardly represented by a simple parametric model. In this paper, a generic distortion model considering both symmetric and asymmetric distortions is developed. Such a model is obtained by using radial basis functions (RBFs) to interpolate the radius and distortion values of symmetric distortions (image coordinates and distortion rays for asymmetric distortions). An accurate and easy to implement distortion correction method is presented. With the proposed approach, quantitative measurement with better accuracy can be achieved, such as in Digital Image Correlation for deformation measurement when used with an optical microscope. The proposed technique is verified by both synthetic and real data experiments.

Three-Axis Attitude Estimation Using Rate-Integrating Gyroscopes

Science.gov (United States)

Crassidis, John L.; Markley, F. Landis

2016-01-01

Traditionally, attitude estimation has been performed using a combination of external attitude sensors and internal three-axis gyroscopes. There are many studies of three-axis attitude estimation using gyros that read angular rates. Rate-integrating gyros measure integrated rates or angular displacements, but three-axis attitude estimation using these types of gyros has not been as fully investigated. This paper derives a Kalman filtering framework for attitude estimation using attitude sensors coupled with rate- integrating gyroscopes. In order to account for correlations introduced by using these gyros, the state vector must be augmented, compared with filters using traditional gyros that read angular rates. Two filters are derived in this paper. The first uses an augmented state-vector form that estimates attitude, gyro biases, and gyro angular displacements. The second ignores correlations, leading to a filter that estimates attitude and gyro biases only. Simulation comparisons are shown for both filters. The work presented in this paper focuses only on attitude estimation using rate-integrating gyros, but it can easily be extended to other applications such as inertial navigation, which estimates attitude and position.

PROTECTION OF HOUSEHOLD APPLIANCES INDUCTION MOTORS AGAINST OVERCURRENT TAKING INTO ACCOUNT NONLINEAR DISTORTION OF PHASE CURRENT

Directory of Open Access Journals (Sweden)

A.G. Sereda

2015-06-01

Full Text Available Purpose. Theoretical justification and engineering of induction motors heat protection method from overload currents taking into account nonlinear distortion of the phase current and implementation as a microprocessor device functioning algorithm. Methodology. To solve the problem used the theory of the representing complex harmonic oscillations analog signals expansion into the oscillation spectrum forming elementary harmonic components in order to compare their properties by applying the theory of discrete signals and systems, as well as methods of spectral analysis and discrete signals filtering. The harmonic analysis versatility is that any periodic signal may be synthesized from harmonic oscillation of certain amplitude, frequency and initial phase. A mathematical model for determining the phase current harmonic content of power supply networks with isolated neutral and non-linear loads types and, as a consequence, the distortion of sinusoidal phase current change is developed by multiplying the analog current in time dependency on the grate delta-function with different sampling intervals, in which the use of simple and widely used in relay protection units, in particular electronic overcurrent relays, mathematical operations of integration squares instantaneous current allows the most in harmony with the mathematical tools to build other network protection types. Findings. The necessity to increase the sensitivity of the induction motors heat protection from overload currents taking into account nonlinear distortion of the phase currents is proved. By nonlinear distortion harmonic analysis of the phase currents the motor protection reliability increasing provided by taking into account the higher harmonic components of the phase currents, which causes to additional losses and heating of the stator winding. It uses the simplest and widely used in protective relaying mathematical apparatus determining of most significant higher harmonics

A complex-valued firing-rate model that approximates the dynamics of spiking networks.

Directory of Open Access Journals (Sweden)

Evan S Schaffer

2013-10-01

Full Text Available Firing-rate models provide an attractive approach for studying large neural networks because they can be simulated rapidly and are amenable to mathematical analysis. Traditional firing-rate models assume a simple form in which the dynamics are governed by a single time constant. These models fail to replicate certain dynamic features of populations of spiking neurons, especially those involving synchronization. We present a complex-valued firing-rate model derived from an eigenfunction expansion of the Fokker-Planck equation and apply it to the linear, quadratic and exponential integrate-and-fire models. Despite being almost as simple as a traditional firing-rate description, this model can reproduce firing-rate dynamics due to partial synchronization of the action potentials in a spiking model, and it successfully predicts the transition to spike synchronization in networks of coupled excitatory and inhibitory neurons.

A complex-valued firing-rate model that approximates the dynamics of spiking networks.

Science.gov (United States)

Schaffer, Evan S; Ostojic, Srdjan; Abbott, L F

2013-10-01

Firing-rate models provide an attractive approach for studying large neural networks because they can be simulated rapidly and are amenable to mathematical analysis. Traditional firing-rate models assume a simple form in which the dynamics are governed by a single time constant. These models fail to replicate certain dynamic features of populations of spiking neurons, especially those involving synchronization. We present a complex-valued firing-rate model derived from an eigenfunction expansion of the Fokker-Planck equation and apply it to the linear, quadratic and exponential integrate-and-fire models. Despite being almost as simple as a traditional firing-rate description, this model can reproduce firing-rate dynamics due to partial synchronization of the action potentials in a spiking model, and it successfully predicts the transition to spike synchronization in networks of coupled excitatory and inhibitory neurons.

Decision making, cognitive distortions and emotional distress: a comparison between pathological gamblers and healthy controls

OpenAIRE

Ciccarelli, M; Griffiths, MD; Nigro, G; Cosenza, M

2017-01-01

Background and objectives: The etiology of problem gambling is multifaceted and complex. Among others factors, poor decision making, cognitive distortions (i.e., irrational beliefs about gambling), and emotional factors (e.g., negative mood states) appear to be among the most important factors in the development and maintenance of problem gambling. Although empirical evidence has suggested that cognitive distortions facilitate gambling and negative emotions are associated with gambling, the i...

Distortions Imposed By Inflation on Historical-Cost Depreciation

OpenAIRE

Bravo-Ureta, Boris E.

1983-01-01

The use of historical-cost depreciation in periods of persistent inflation decreases the present value of depreciation deductions, thus understating the true economic cost of capital and increasing the real after-tax rate of return required by potential investors. Efforts to correct these problems by adopting depreciation methods that allow for artificially short recovery periods or accelerated rates do not provide an adequate solution. Distortions imposed by inflation on historical-cost depr...

Quantitative studies with the gamma-camera: correction for spatial and energy distortion

International Nuclear Information System (INIS)

Soussaline, F.; Todd-Pokropek, A.E.; Raynaud, C.

1977-01-01

The gamma camera sensitivity distribution is an important source of error in quantitative studies. In addition, spatial distortion produces apparent variations in count density which degrades quantitative studies. The flood field image takes into account both effects and is influenced by the pile-up of the tail distribution. It is essential to measure separately each of these parameters. These were investigated using a point source displaced by a special scanning table with two X, Y stepping motors of 10 micron precision. The spatial distribution of the sensitivity, spatial distortion and photopeak in the field of view were measured and compared for different setting-up of the camera and PM gains. For well-tuned cameras, the sensitivity is fairly constant, while the variations appearing in the flood field image are primarily due to spatial distortion, the former more dependent than the latter on the energy window setting. This indicates why conventional flood field uniformity correction must not be applied. A correction technique to improve the results in quantitative studies has been tested using a continuously matched energy window at every point within the field. A method for correcting spatial distortion is also proposed, where, after an adequately sampled measurement of this error, a transformation can be applied to calculate the true position of events. The knowledge of the magnitude of these parameters is essential in the routine use and design of detector systems

Source Coding in Networks with Covariance Distortion Constraints

DEFF Research Database (Denmark)

Zahedi, Adel; Østergaard, Jan; Jensen, Søren Holdt

2016-01-01

results to a joint source coding and denoising problem. We consider a network with a centralized topology and a given weighted sum-rate constraint, where the received signals at the center are to be fused to maximize the output SNR while enforcing no linear distortion. We show that one can design...

Bioindication and ecological rate setting with radioecology taken as an example

International Nuclear Information System (INIS)

Krivolutskij, D.A.; Tikhomirov, F.A.; Fedorov, E.A.; Smirnov, E.G.; Moskovskij Gosudarstvennyj Univ.

1986-01-01

Necessity in ecological rate setting of technogenic contaminations (including radionuclides) in topsoil and soils is substantiated. Bioindication of technogenic contaminations with provision for community of distribution and migration of contaminating substances in topsoil and their effect on organisms, populations and biocenoses is suggested as one of approaches to ecological rate setting. General problems of methodology and objects of ecological rate setting in phytocenoses and zoocenoses are discussed. Basic principles and criteria of rate setting of contaminating substance content in soils are considered with provision for regional soil-climatic conditions and contaminating substance properties

Privatization of Land Plot Under Integral Real Estate Complex

Directory of Open Access Journals (Sweden)

Maruchek A. A.

2014-10-01

Full Text Available The article deals with the questions concerning the privatization of a land plot under integral real estate complex. The authors come to conclusion that a number of legislation norms relating to privatization of a land plot do not take into account the construction of an integral real estate complex that could cause some problems in the realization of the right to privatization of the land plot

An Advanced Detecting Scheme against a Signal Distortion with a Smart Transmitter

International Nuclear Information System (INIS)

Son, Jun Young; Kim, Young Mi

2013-01-01

The analog signal distortion could be detected. Also the data integrity for information security could be provided. The assurance of the integrity in digital information as well as analog signals is necessary. The above proposed schemes can be utilized for detecting the modification of the digital information or analog signal distortion without any of authentication. These effects have merits of the defenses for analog signals and cyber security in terms of information integrity. There are many kinds of measuring nuclear I and C system. Thus, the applicable algorithms may be different according to the lightness or the level of the security in each measuring system. In the future, finding and applying the efficient algorithms in each measuring systems in the nuclear power plant should be studied. As the I and C system will be gradually digitalized, the requirements for basic security concepts should be considered and applied. As IT technology has been much developed, measuring nuclear I and C (Instrument and Control) systems also is going to be evolving. At this point, the smart transmitter has been developed and tried to be applied. Recently, constructed nuclear power plants in Korea have adopted the smart meters. In case of Shin-Kori unit 3, about 59 safety grade smart transmitters and about 180 non-safety grade smart transmitters are used for measuring various signals. In the field of measuring nuclear I and C (Instrument and Control) systems, the cyber security problems can happen more. Thus, providing defense methods against possible cyber attacks are essential. In particular, the defense schemes for providing data information integrity will be essential. In addition, it is necessary to detect the analog signal distortion between the host smart transmitters and the client cabinet. In this paper, applicable one of directions and methods against the above two problems are proposed

An Advanced Detecting Scheme against a Signal Distortion with a Smart Transmitter

Energy Technology Data Exchange (ETDEWEB)

Son, Jun Young; Kim, Young Mi [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2013-10-15

The analog signal distortion could be detected. Also the data integrity for information security could be provided. The assurance of the integrity in digital information as well as analog signals is necessary. The above proposed schemes can be utilized for detecting the modification of the digital information or analog signal distortion without any of authentication. These effects have merits of the defenses for analog signals and cyber security in terms of information integrity. There are many kinds of measuring nuclear I and C system. Thus, the applicable algorithms may be different according to the lightness or the level of the security in each measuring system. In the future, finding and applying the efficient algorithms in each measuring systems in the nuclear power plant should be studied. As the I and C system will be gradually digitalized, the requirements for basic security concepts should be considered and applied. As IT technology has been much developed, measuring nuclear I and C (Instrument and Control) systems also is going to be evolving. At this point, the smart transmitter has been developed and tried to be applied. Recently, constructed nuclear power plants in Korea have adopted the smart meters. In case of Shin-Kori unit 3, about 59 safety grade smart transmitters and about 180 non-safety grade smart transmitters are used for measuring various signals. In the field of measuring nuclear I and C (Instrument and Control) systems, the cyber security problems can happen more. Thus, providing defense methods against possible cyber attacks are essential. In particular, the defense schemes for providing data information integrity will be essential. In addition, it is necessary to detect the analog signal distortion between the host smart transmitters and the client cabinet. In this paper, applicable one of directions and methods against the above two problems are proposed.

Test of distorted wave kinematic coupling approximation calculations for knockout reactions

International Nuclear Information System (INIS)

Jain, A.K.

1990-01-01

A test has been devised to check the validity of conventional distorted-wave impulse approximation (DWIA) treatment of knockout reactions. The conventional DWIA formalism separates the three-body final state Schroedinger equation for a knockout reaction into two two-body Schroedinger equations by assuming an asymptotic constant value for the three-body coupling term commonly known as the kinematic coupling approximation (KCA). In the test case, which consists of an extreme asymmetric situation where one of the distorting optical potentials is assumed to vanish, the three-body final state Schroedinger equation can be solved exactly as a product of two two-body solutions using one particular set of relative coordinates. Large influence of the three-body coupling term is seen in the comparison of the exact and KCA results for (α,2α) and (p,pα) knockout reactions when the distorting optical potentials are weakly absorbing

Analytical modeling of pulse-pileup distortion using the true pulse shape; applications to Fermi-GBM

International Nuclear Information System (INIS)

Chaplin, Vandiver; Bhat, Narayana; Briggs, Michael S.; Connaughton, Valerie

2013-01-01

Pulse-pileup affects most photon counting systems and occurs when photon detections occur faster than the detector's shaping and recovery time. At high input rates, shaped pulses interfere and the source spectrum, as well as intensity information, get distorted. For instruments using bipolar pulse shaping there are two aspects to consider: ‘peak’ and ‘tail’ pileup effects, which raise and lower the measured energy, respectively. Peak effects have been extensively modeled in the past. Tail effects have garnered less attention due to increased complexity. We leverage previous work to derive an accurate, semi-analytical prediction for peak and tail pileup including high order effects. We use the pulse shape of the detectors of the Fermi Gamma-ray Burst Monitor. The measured spectrum is calculated by expressing exposure time with a state-space expansion of overlapping pileup states and is valid up to very high rates. The model correctly predicts deadtime and pileup losses, and energy-dependent losses due to tail subtraction (sub-threshold) effects. We discuss total losses in terms of the true rate of photon detections versus the recorded count rate. -- Highlights: • A derivation of pulse-pileup spectral and intensity distortion is presented. • Applies to bipolar shaping instruments in general, but is calculated for Fermi-GBM. • Exposure time is partitioned with pulse widths as states of a Poisson process. • Each state has an associated energy distribution function for peak and tail pileup. • The total spectrum is the union of pulse states and their associated spectra

A holistic calibration method with iterative distortion compensation for stereo deflectometry

Science.gov (United States)

Xu, Yongjia; Gao, Feng; Zhang, Zonghua; Jiang, Xiangqian

2018-07-01

This paper presents a novel holistic calibration method for stereo deflectometry system to improve the system measurement accuracy. The reconstruction result of stereo deflectometry is integrated with the calculated normal data of the measured surface. The calculation accuracy of the normal data is seriously influenced by the calibration accuracy of the geometrical relationship of the stereo deflectometry system. Conventional calibration approaches introduce form error to the system due to inaccurate imaging model and distortion elimination. The proposed calibration method compensates system distortion based on an iterative algorithm instead of the conventional distortion mathematical model. The initial value of the system parameters are calculated from the fringe patterns displayed on the systemic LCD screen through a reflection of a markless flat mirror. An iterative algorithm is proposed to compensate system distortion and optimize camera imaging parameters and system geometrical relation parameters based on a cost function. Both simulation work and experimental results show the proposed calibration method can significantly improve the calibration and measurement accuracy of a stereo deflectometry. The PV (peak value) of measurement error of a flat mirror can be reduced to 69.7 nm by applying the proposed method from 282 nm obtained with the conventional calibration approach.

Integrating complexity into data-driven multi-hazard supply chain network strategies

Science.gov (United States)

Long, Suzanna K.; Shoberg, Thomas G.; Ramachandran, Varun; Corns, Steven M.; Carlo, Hector J.

2013-01-01

Major strategies in the wake of a large-scale disaster have focused on short-term emergency response solutions. Few consider medium-to-long-term restoration strategies that reconnect urban areas to the national supply chain networks (SCN) and their supporting infrastructure. To re-establish this connectivity, the relationships within the SCN must be defined and formulated as a model of a complex adaptive system (CAS). A CAS model is a representation of a system that consists of large numbers of inter-connections, demonstrates non-linear behaviors and emergent properties, and responds to stimulus from its environment. CAS modeling is an effective method of managing complexities associated with SCN restoration after large-scale disasters. In order to populate the data space large data sets are required. Currently access to these data is hampered by proprietary restrictions. The aim of this paper is to identify the data required to build a SCN restoration model, look at the inherent problems associated with these data, and understand the complexity that arises due to integration of these data.

Factors associated with body image distortion in Korean adolescents

Directory of Open Access Journals (Sweden)

Hyun MY

2014-05-01

Full Text Available Mi-Yeul Hyun,1 Young-Eun Jung,2 Moon-Doo Kim,2 Young-Sook Kwak,2 Sung-Chul Hong,3 Won-Myong Bahk,4 Bo-Hyun Yoon,5 Hye Won Yoon,6 Bora Yoo61College of Nursing, Jeju National University, Jeju, Korea; 2Department of Psychiatry, School of Medicine, Jeju National University, Jeju, Korea; 3Department of Preventive Medicine, School of Medicine, Jeju National University, Jeju, Korea; 4Department of Psychiatry, Yeouido St Mary’s Hospital, College of Medicine, The Catholic University of Korea, Seoul, Korea; 5Department of Psychiatry, Naju National Hospital, Naju, Korea; 6School of Medicine, Jeju National University, Jeju, KoreaPurpose: Body image incorporates cognitive and affective components as well as behaviors related to own body perception. This study evaluated the occurrence of body image distortion and its correlates in Korean adolescents.Methods: In a school-based cross-sectional survey, a total of 2,117 adolescents were recruited. They filled out self-completing questionnaires on body image distortion, eating attitudes, and behaviors (Eating Attitude Test-26 and related factors.Results: Body image distortions were found in 51.8 percent of adolescents. Univariate analyses showed that boys and older adolescents had higher rates of body image distortion. In the multivariate analyses, body image distortion was associated with high risk for eating disorders (odds ratio [OR] =1.69; 95% confidence interval [CI] 1.11–2.58; P=0.015 and being over weight (OR =33.27; 95% CI 15.51–71.35; P<0.001 or obese (OR =9.37; 95% CI 5.06–17.34; P<0.001.Conclusion: These results suggest that body image distortion is relatively common in Korean adolescents, which has implications for adolescents at risk of developing eating disorders.Keywords: body image distortion, high risk for eating disorders, Korean adolescent

Comparison of Aspergillus species-complexes detected in different environmental settings

OpenAIRE

Sabino, Raquel; Viegas, Carla; Veríssimo, Carla; Clemons, K. V.; Stevens, D. A.

2014-01-01

Purpose: Samples from different environmental sources were screened for the presence of Aspergillus, and the distribution of the different species-complexes was determined in order to understand differences among that distribution in the several environmental sources and which of these species complexes are present in specific environmental settings. Methods: Four distinct environments (beaches, poultries, swineries and hospital) were studied and analyzed for which Aspergillus complexes were ...

Modeling distortion of HIT by an Actuator Disk in a periodic domain

Science.gov (United States)

Ghate, Aditya; Ghaisas, Niranjan; Lele, Sanjiva

2017-11-01

We study the distortion of incompressible, homogeneous isotropic turbulence (HIT) by a dragging actuator disk with a fixed thrust coefficient (under the large Reynolds number limit), using Large Eddy Simulation (LES). The HIT inflow is tailored to ensure that the largest length scales in the flow are smaller than the actuator disk diameter in order to minimize the meandering of the turbulent wake and isolate the length scales that undergo distortion. The numerical scheme (Fourier collocation with dealiasing) and the SGS closure (anisotropic minimum dissipation model) are carefully selected to minimize numerical artifacts expected due to the inviscid assumption. The LES is used to characterize the following 3 properties of the flow a) distortion of HIT due to the expanding streamtube resulting in strong anisotropy, b) turbulent pressure modulation across the actuator disk, and the c) turbulent wake state. Finally, we attempt to model the initial distortion and the pressure modulation using a WKB variant of RDT solved numerically using a set of discrete Gabor modes. Funding provided by Precourt Institute for Energy at Stanford University.

Path integral representations on the complex sphere

International Nuclear Information System (INIS)

Grosche, C.

2007-08-01

In this paper we discuss the path integral representations for the coordinate systems on the complex sphere S 3C . The Schroedinger equation, respectively the path integral, separates in exactly 21 orthogonal coordinate systems. We enumerate these coordinate systems and we are able to present the path integral representations explicitly in the majority of the cases. In each solution the expansion into the wave-functions is stated. Also, the kernel and the corresponding Green function can be stated in closed form in terms of the invariant distance on the sphere, respectively on the hyperboloid. (orig.)

Color correction for chromatic distortion in a multi-wavelength digital holographic system

International Nuclear Information System (INIS)

Lin, Li-Chien; Huang, Yi-Lun; Tu, Han-Yen; Lai, Xin-Ji; Cheng, Chau-Jern

2011-01-01

A multi-wavelength digital holographic (MWDH) system has been developed to record and reconstruct color images. In comparison to working with digital cameras, however, high-quality color reproduction is difficult to achieve, because of the imperfections from the light sources, optical components, optical recording devices and recording processes. Thus, we face the problem of correcting the colors altered during the digital holographic process. We therefore propose a color correction scheme to correct the chromatic distortion caused by the MWDH system. The scheme consists of two steps: (1) creating a color correction profile and (2) applying it to the correction of the distorted colors. To create the color correction profile, we generate two algorithms: the sequential algorithm and the integrated algorithm. The ColorChecker is used to generate the distorted colors and their desired corrected colors. The relationship between these two color patches is fixed into a specific mathematical model, the parameters of which are estimated, creating the profile. Next, the profile is used to correct the color distortion of images, capturing and preserving the original vibrancy of the reproduced colors for different reconstructed images

INTEGRATED SFM TECHNIQUES USING DATA SET FROM GOOGLE EARTH 3D MODEL AND FROM STREET LEVEL

Directory of Open Access Journals (Sweden)

L. Inzerillo

2017-08-01

Full Text Available Structure from motion (SfM represents a widespread photogrammetric method that uses the photogrammetric rules to carry out a 3D model from a photo data set collection. Some complex ancient buildings, such as Cathedrals, or Theatres, or Castles, etc. need to implement the data set (realized from street level with the UAV one in order to have the 3D roof reconstruction. Nevertheless, the use of UAV is strong limited from the government rules. In these last years, Google Earth (GE has been enriched with the 3D models of the earth sites. For this reason, it seemed convenient to start to test the potentiality offered by GE in order to extract from it a data set that replace the UAV function, to close the aerial building data set, using screen images of high resolution 3D models. Users can take unlimited “aerial photos” of a scene while flying around in GE at any viewing angle and altitude. The challenge is to verify the metric reliability of the SfM model carried out with an integrated data set (the one from street level and the one from GE aimed at replace the UAV use in urban contest. This model is called integrated GE SfM model (i-GESfM. In this paper will be present a case study: the Cathedral of Palermo.

Corrections of residual fluorescence distortions for a glancing-emergence-angle x-ray-absorption technique

International Nuclear Information System (INIS)

Brewe, D.L.; Pease, D.M.; Budnick, J.I.

1994-01-01

Distortions appear in x-ray-absorption spectra obtained by monitoring the fluorescence from thick samples with concentrated absorbing species. The glancing-emergence-angle technique for obtaining spectra from this type of sample eliminates distortions from the measured spectra by monitoring the fluorescence leaving the sample at a small angle relative to the sample surface. This technique is limited by the small signal available from the inherently limited detector solid angle. In addition, no precise estimate of the required restriction on maximum emergent angle θ max has been available. We have calculated residual extended x-ray-absorption fine structure distortions as a function of θ max , and performed experimental tests of the calculations. These calculations provide a means to estimate the required detector geometry for negligible distortions, or alternatively, allow the use of a larger θ max , increasing the available signal, with the remaining residual distortions removed by application of the calculations. The calculations are also applicable to other detector geometries, and account for detectors subtending a large solid angle by an integration over the subtended angle. This represents an improvement over previous calculations. The application to more general detector configurations is also discussed

Setting the right path and pace for integration.

Science.gov (United States)

Cwiek, Katherine A; Inniger, Meredith C; Zismer, Daniel K

2014-04-01

Far from being a monolithic trend, integration in health care today is progressing in various forms, and at different rates in different markets within and across the range of healthcare organizations. Each organization should develop a tailored strategy that delineates the level and type of integration it will pursue and at what pace to pursue it. This effort will require evaluation of external market conditions with respect to integration and competition and a candid assessment of intraorganizational integration. The compared results of the two analyses will provide the basis for formulating strategy.

Role for ribosome-associated complex and stress-seventy subfamily B (RAC-Ssb) in integral membrane protein translation.

Science.gov (United States)

Acosta-Sampson, Ligia; Döring, Kristina; Lin, Yuping; Yu, Vivian Y; Bukau, Bernd; Kramer, Günter; Cate, Jamie H D

2017-12-01

Targeting of most integral membrane proteins to the endoplasmic reticulum is controlled by the signal recognition particle, which recognizes a hydrophobic signal sequence near the protein N terminus. Proper folding of these proteins is monitored by the unfolded protein response and involves protein degradation pathways to ensure quality control. Here, we identify a new pathway for quality control of major facilitator superfamily transporters that occurs before the first transmembrane helix, the signal sequence recognized by the signal recognition particle, is made by the ribosome. Increased rates of translation elongation of the N-terminal sequence of these integral membrane proteins can divert the nascent protein chains to the ribosome-associated complex and stress-seventy subfamily B chaperones. We also show that quality control of integral membrane proteins by ribosome-associated complex-stress-seventy subfamily B couples translation rate to the unfolded protein response, which has implications for understanding mechanisms underlying human disease and protein production in biotechnology. © 2017 by The American Society for Biochemistry and Molecular Biology, Inc.

Crystal structure of the enzyme-product complex reveals sugar ring distortion during catalysis by family 63 inverting α-glycosidase.

Science.gov (United States)

Miyazaki, Takatsugu; Nishikawa, Atsushi; Tonozuka, Takashi

2016-12-01

Glycoside hydrolases are divided into two groups, known as inverting and retaining enzymes, based on their hydrolytic mechanisms. Glycoside hydrolase family 63 (GH63) is composed of inverting α-glycosidases, which act mainly on α-glucosides. We previously found that Escherichia coli GH63 enzyme, YgjK, can hydrolyze 2-O-α-d-glucosyl-d-galactose. Two constructed glycosynthase mutants, D324N and E727A, which catalyze the transfer of a β-glucosyl fluoride donor to galactose, lactose, and melibiose. Here, we determined the crystal structures of D324N and E727A soaked with a mixture of glucose and lactose at 1.8- and 2.1-Å resolutions, respectively. Because glucose and lactose molecules are found at the active sites in both structures, it is possible that these structures mimic the enzyme-product complex of YgjK. A glucose molecule found at subsite -1 in both structures adopts an unusual 1 S 3 skew-boat conformation. Comparison between these structures and the previously determined enzyme-substrate complex structure reveals that the glucose pyranose ring might be distorted immediately after nucleophilic attack by a water molecule. These structures represent the first enzyme-product complex for the GH63 family, as well as the structurally-related glycosidases, and it may provide insight into the catalytic mechanism of these enzymes. Copyright © 2016 Elsevier Inc. All rights reserved.

Mesoscopic Elastic Distortions in GaAs Quantum Dot Heterostructures.

Science.gov (United States)

Pateras, Anastasios; Park, Joonkyu; Ahn, Youngjun; Tilka, Jack A; Holt, Martin V; Reichl, Christian; Wegscheider, Werner; Baart, Timothy A; Dehollain, Juan Pablo; Mukhopadhyay, Uditendu; Vandersypen, Lieven M K; Evans, Paul G

2018-05-09

Quantum devices formed in high-electron-mobility semiconductor heterostructures provide a route through which quantum mechanical effects can be exploited on length scales accessible to lithography and integrated electronics. The electrostatic definition of quantum dots in semiconductor heterostructure devices intrinsically involves the lithographic fabrication of intricate patterns of metallic electrodes. The formation of metal/semiconductor interfaces, growth processes associated with polycrystalline metallic layers, and differential thermal expansion produce elastic distortion in the active areas of quantum devices. Understanding and controlling these distortions present a significant challenge in quantum device development. We report synchrotron X-ray nanodiffraction measurements combined with dynamical X-ray diffraction modeling that reveal lattice tilts with a depth-averaged value up to 0.04° and strain on the order of 10 -4 in the two-dimensional electron gas (2DEG) in a GaAs/AlGaAs heterostructure. Elastic distortions in GaAs/AlGaAs heterostructures modify the potential energy landscape in the 2DEG due to the generation of a deformation potential and an electric field through the piezoelectric effect. The stress induced by metal electrodes directly impacts the ability to control the positions of the potential minima where quantum dots form and the coupling between neighboring quantum dots.

An Improved Distortion Operator for Insurance Risks

Institute of Scientific and Technical Information of China (English)

GAO Jian-wei; QIU Wan-hua

2002-01-01

This paper reviews the distortion function approach developed in the actuarial literature for insurance risks. The main aim of this paper is to derive an extensive distortion operator, and to propose a new premium principle based on this extensive distortion operator. Furthermore, the non-robustness of general distortion operator is also discussed. Examples are provided using Bernoulli, Pareto, Lognormal and Gamma distribution assumptions.

Finding low-conductance sets with dense interactions (FLCD) for better protein complex prediction.

Science.gov (United States)

Wang, Yijie; Qian, Xiaoning

2017-03-14

Intuitively, proteins in the same protein complexes should highly interact with each other but rarely interact with the other proteins in protein-protein interaction (PPI) networks. Surprisingly, many existing computational algorithms do not directly detect protein complexes based on both of these topological properties. Most of them, depending on mathematical definitions of either "modularity" or "conductance", have their own limitations: Modularity has the inherent resolution problem ignoring small protein complexes; and conductance characterizes the separability of complexes but fails to capture the interaction density within complexes. In this paper, we propose a two-step algorithm FLCD (Finding Low-Conductance sets with Dense interactions) to predict overlapping protein complexes with the desired topological structure, which is densely connected inside and well separated from the rest of the networks. First, FLCD detects well-separated subnetworks based on approximating a potential low-conductance set through a personalized PageRank vector from a protein and then solving a mixed integer programming (MIP) problem to find the minimum-conductance set within the identified low-conductance set. At the second step, the densely connected parts in those subnetworks are discovered as the protein complexes by solving another MIP problem that aims to find the dense subnetwork in the minimum-conductance set. Experiments on four large-scale yeast PPI networks from different public databases demonstrate that the complexes predicted by FLCD have better correspondence with the yeast protein complex gold standards than other three state-of-the-art algorithms (ClusterONE, LinkComm, and SR-MCL). Additionally, results of FLCD show higher biological relevance with respect to Gene Ontology (GO) terms by GO enrichment analysis.

Path integral representations on the complex sphere

Energy Technology Data Exchange (ETDEWEB)

Grosche, C. [Hamburg Univ. (Germany). 2. Inst. fuer Theoretische Physik

2007-08-15

In this paper we discuss the path integral representations for the coordinate systems on the complex sphere S{sub 3C}. The Schroedinger equation, respectively the path integral, separates in exactly 21 orthogonal coordinate systems. We enumerate these coordinate systems and we are able to present the path integral representations explicitly in the majority of the cases. In each solution the expansion into the wave-functions is stated. Also, the kernel and the corresponding Green function can be stated in closed form in terms of the invariant distance on the sphere, respectively on the hyperboloid. (orig.)

Wideband LTE power amplifier with integrated novel analog pre-distorter linearizer for mobile wireless communications.

Directory of Open Access Journals (Sweden)

Eswaran Uthirajoo

Full Text Available For the first time, a new circuit to extend the linear operation bandwidth of a LTE (Long Term Evolution power amplifier, while delivering a high efficiency is implemented in less than 1 mm2 chip area. The 950 µm × 900 µm monolithic microwave integrated circuit (MMIC power amplifier (PA is fabricated in a 2 µm InGaP/GaAs process. An on-chip analog pre-distorter (APD is designed to improve the linearity of the PA, up to 20 MHz channel bandwidth. Intended for 1.95 GHz Band 1 LTE application, the PA satisfies adjacent channel leakage ratio (ACLR and error vector magnitude (EVM specifications for a wide LTE channel bandwidth of 20 MHz at a linear output power of 28 dBm with corresponding power added efficiency (PAE of 52.3%. With a respective input and output return loss of 30 dB and 14 dB, the PA's power gain is measured to be 32.5 dB while exhibiting an unconditional stability characteristic from DC up to 5 GHz. The proposed APD technique serves to be a good solution to improve linearity of a PA without sacrificing other critical performance metrics.

Wideband LTE power amplifier with integrated novel analog pre-distorter linearizer for mobile wireless communications.

Science.gov (United States)

Uthirajoo, Eswaran; Ramiah, Harikrishnan; Kanesan, Jeevan; Reza, Ahmed Wasif

2014-01-01

For the first time, a new circuit to extend the linear operation bandwidth of a LTE (Long Term Evolution) power amplifier, while delivering a high efficiency is implemented in less than 1 mm2 chip area. The 950 µm × 900 µm monolithic microwave integrated circuit (MMIC) power amplifier (PA) is fabricated in a 2 µm InGaP/GaAs process. An on-chip analog pre-distorter (APD) is designed to improve the linearity of the PA, up to 20 MHz channel bandwidth. Intended for 1.95 GHz Band 1 LTE application, the PA satisfies adjacent channel leakage ratio (ACLR) and error vector magnitude (EVM) specifications for a wide LTE channel bandwidth of 20 MHz at a linear output power of 28 dBm with corresponding power added efficiency (PAE) of 52.3%. With a respective input and output return loss of 30 dB and 14 dB, the PA's power gain is measured to be 32.5 dB while exhibiting an unconditional stability characteristic from DC up to 5 GHz. The proposed APD technique serves to be a good solution to improve linearity of a PA without sacrificing other critical performance metrics.

Wideband LTE Power Amplifier with Integrated Novel Analog Pre-Distorter Linearizer for Mobile Wireless Communications

Science.gov (United States)

Uthirajoo, Eswaran; Ramiah, Harikrishnan; Kanesan, Jeevan; Reza, Ahmed Wasif

2014-01-01

For the first time, a new circuit to extend the linear operation bandwidth of a LTE (Long Term Evolution) power amplifier, while delivering a high efficiency is implemented in less than 1 mm2 chip area. The 950 µm × 900 µm monolithic microwave integrated circuit (MMIC) power amplifier (PA) is fabricated in a 2 µm InGaP/GaAs process. An on-chip analog pre-distorter (APD) is designed to improve the linearity of the PA, up to 20 MHz channel bandwidth. Intended for 1.95 GHz Band 1 LTE application, the PA satisfies adjacent channel leakage ratio (ACLR) and error vector magnitude (EVM) specifications for a wide LTE channel bandwidth of 20 MHz at a linear output power of 28 dBm with corresponding power added efficiency (PAE) of 52.3%. With a respective input and output return loss of 30 dB and 14 dB, the PA’s power gain is measured to be 32.5 dB while exhibiting an unconditional stability characteristic from DC up to 5 GHz. The proposed APD technique serves to be a good solution to improve linearity of a PA without sacrificing other critical performance metrics. PMID:25033049

Volterra Series Based Distortion Effect

DEFF Research Database (Denmark)

Agerkvist, Finn T.

2010-01-01

A large part of the characteristic sound of the electric guitar comes from nonlinearities in the signal path. Such nonlinearities may come from the input- or output-stage of the amplier, which is often equipped with vacuum tubes or a dedicated distortion pedal. In this paper the Volterra series...... expansion for non linear systems is investigated with respect to generating good distortion. The Volterra series allows for unlimited adjustment of the level and frequency dependency of each distortion component. Subjectively relevant ways of linking the dierent orders are discussed....

ROLE OF FCA WELDING PROCESS PARAMETERS ON BEAD PROFILE, ANGULAR AND BOWING DISTORTION OF FERRITIC STAINLESS STEEL SHEETS

Directory of Open Access Journals (Sweden)

VENKATESAN M. V.

2014-02-01

Full Text Available This paper discusses the influence of flux cored arc welding (FCAW process parameters such as welding current, travel speed, voltage and CO2 shielding gas flow rate on bead profile, bowing distortion and angular distortion of 409 M ferritic stainless steel sheets of 2 mm thickness. The bowing and angular distortions of the welded plates were measured using a simple device called profile tracer and Vernier bevel protractor respectively. The study revealed that the FCAW process parameters have significant effect on bead profile, and distortion. The relationship between bead profile and distortions were analyzed. Most favorable process parameters that give uniform bead profile and minimum distortion for the weld are recommended for fabrication.

Distortion product otoacoustic emissions: comparison of sequential vs. simultaneous presentation of primary tones.

Science.gov (United States)

Kumar, U Ajith; Maruthy, Sandeep; Chandrakant, Vishwakarma

2009-03-01

Distortion product otoacoustic emissions are one form of evoked otoacoustic emissions. DPOAEs provide the frequency specific information about the hearing status in mid and high frequency regions. But in most screening protocols TEOAEs are preferred as it requires less time compared to DPOAE. This is because, in DPOAE each stimulus is presented one after the other and responses are analyzed. Grason and Stadler Incorporation 60 (GSI-60) offer simultaneous presentation of four sets of primary tones at a time and checks for the DPOAE. In this mode of presentation, all the pairs are presented at a time and following that response is extracted separately whereas, in sequential mode primaries are presented in orderly fashion one after the other. In this article simultaneous and sequential protocols were used to compare the Distortion product otoacoustic emission amplitude, noise floor and administration time in individuals with normal hearing and mild sensori-neural (SN) hearing loss. In simultaneous protocols four sets of primary tones (i.e. 8 tones) were presented together whereas, in sequential presentation mode one set of primary tones was presented each time. Simultaneous protocol was completed in less than half the time required for the completion of sequential protocol. Two techniques yielded similar results at frequencies above 1000 Hz only in normal hearing group. In SN hearing loss group simultaneous presentation yielded signifi cantly higher noise floors and distortion product amplitudes. This result challenges the use of simultaneous presentation technique in neonatal hearing screening programmes and on other pathologies. This discrepancy between two protocols may be due to some changes in biomechanical process in the cochlear and/or due to higher distortion/noise produced by the system during the simultaneous presentation mode.

Expression-dependent susceptibility to face distortions in processing of facial expressions of emotion.

Science.gov (United States)

Guo, Kun; Soornack, Yoshi; Settle, Rebecca

2018-03-05

Our capability of recognizing facial expressions of emotion under different viewing conditions implies the existence of an invariant expression representation. As natural visual signals are often distorted and our perceptual strategy changes with external noise level, it is essential to understand how expression perception is susceptible to face distortion and whether the same facial cues are used to process high- and low-quality face images. We systematically manipulated face image resolution (experiment 1) and blur (experiment 2), and measured participants' expression categorization accuracy, perceived expression intensity and associated gaze patterns. Our analysis revealed a reasonable tolerance to face distortion in expression perception. Reducing image resolution up to 48 × 64 pixels or increasing image blur up to 15 cycles/image had little impact on expression assessment and associated gaze behaviour. Further distortion led to decreased expression categorization accuracy and intensity rating, increased reaction time and fixation duration, and stronger central fixation bias which was not driven by distortion-induced changes in local image saliency. Interestingly, the observed distortion effects were expression-dependent with less deterioration impact on happy and surprise expressions, suggesting this distortion-invariant facial expression perception might be achieved through the categorical model involving a non-linear configural combination of local facial features. Copyright © 2018 Elsevier Ltd. All rights reserved.

Optimal Interest-Rate Setting in a Dynamic IS/AS Model

DEFF Research Database (Denmark)

Jensen, Henrik

2011-01-01

This note deals with interest-rate setting in a simple dynamic macroeconomic setting. The purpose is to present some basic and central properties of an optimal interest-rate rule. The model framework predates the New-Keynesian paradigm of the late 1990s and onwards (it is accordingly dubbed “Old...

Plane Transformations in a Complex Setting III: Similarities

Science.gov (United States)

Dana-Picard, Thierry

2009-01-01

This is the third part of a study of plane transformations described in a complex setting. After the study of homotheties, translations, rotations and reflections, we proceed now to the study of plane similarities, either direct or inverse. Their group theoretical properties are described, and their action on classical geometrical objects is…

Air crew exposure on board a subsonic aircraft studied with complex dosimetric sets

International Nuclear Information System (INIS)

Spurny, F.; Votockova, I.; Bottollier-Depois, J.F.

1996-01-01

Radiation fields on board a subsonic aircraft have been studied using a complex set of measuring instruments i.e. tissue equivalent proportional counter (TEPC), neutron rem-meter, environmental radiation dose rate meter, thermoluminescent detectors (TLDs), track etch detectors (TEDs) and bubble damage neutron detectors (BDNDs). The measurements have been realised on board the Airbus A310-300 during the flights Prague-Montreal and Montreal-Prague, in February 1995. The results obtained are presented, analysed and discussed both from the point of view of the detector responses and the general exposure levels. (authors). 23 refs., 1 fig., 4 tabs

Cancer survival classification using integrated data sets and intermediate information.

Science.gov (United States)

Kim, Shinuk; Park, Taesung; Kon, Mark

2014-09-01

Although numerous studies related to cancer survival have been published, increasing the prediction accuracy of survival classes still remains a challenge. Integration of different data sets, such as microRNA (miRNA) and mRNA, might increase the accuracy of survival class prediction. Therefore, we suggested a machine learning (ML) approach to integrate different data sets, and developed a novel method based on feature selection with Cox proportional hazard regression model (FSCOX) to improve the prediction of cancer survival time. FSCOX provides us with intermediate survival information, which is usually discarded when separating survival into 2 groups (short- and long-term), and allows us to perform survival analysis. We used an ML-based protocol for feature selection, integrating information from miRNA and mRNA expression profiles at the feature level. To predict survival phenotypes, we used the following classifiers, first, existing ML methods, support vector machine (SVM) and random forest (RF), second, a new median-based classifier using FSCOX (FSCOX_median), and third, an SVM classifier using FSCOX (FSCOX_SVM). We compared these methods using 3 types of cancer tissue data sets: (i) miRNA expression, (ii) mRNA expression, and (iii) combined miRNA and mRNA expression. The latter data set included features selected either from the combined miRNA/mRNA profile or independently from miRNAs and mRNAs profiles (IFS). In the ovarian data set, the accuracy of survival classification using the combined miRNA/mRNA profiles with IFS was 75% using RF, 86.36% using SVM, 84.09% using FSCOX_median, and 88.64% using FSCOX_SVM with a balanced 22 short-term and 22 long-term survivor data set. These accuracies are higher than those using miRNA alone (70.45%, RF; 75%, SVM; 75%, FSCOX_median; and 75%, FSCOX_SVM) or mRNA alone (65.91%, RF; 63.64%, SVM; 72.73%, FSCOX_median; and 70.45%, FSCOX_SVM). Similarly in the glioblastoma multiforme data, the accuracy of miRNA/mRNA using IFS

Rate-distortion in Closed-Loop LTI Systems

DEFF Research Database (Denmark)

Silva, Eduardo; Derpich, Milan; Østergaard, Jan

2013-01-01

We consider a networked LTI system subject to an average data-rate constraint in the feedback path.We provide upper bounds to the minimal source coding rate required to achieve mean square stability and a desired level of performance. In the quadratic Gaussian case, an almost complete rate...

Rape-related cognitive distortions: Preliminary findings on the role of early maladaptive schemas.

Science.gov (United States)

Sigre-Leirós, Vera; Carvalho, Joana; Nobre, Pedro J

2015-01-01

Despite the important focus on the notion of cognitive distortions in the sexual offending area, the relevance of underlying cognitive schemas in sexual offenders has also been suggested. The aim of the present study was to investigate a potential relationship between Early Maladaptive Schemas (EMSs) and cognitive distortions in rapists. A total of 33 men convicted for rape completed the Bumby Rape Scale (BRS), the Young Schema Questionnaire - Short form-3 (YSQ-S3), the Brief Symptom Inventory (BSI), and the Socially Desirable Response Set Measure (SDRS-5). Results showed a significant relationship between the impaired limits schematic domain and the Justifying Rape dimension of the BRS. Specifically, after controlling for psychological distress levels and social desirability tendency, the entitlement/grandiosity schema from the impaired limits domain was a significant predictor of cognitive distortions related to Justifying Rape themes. Overall, despite preliminary, there is some evidence that the Young's Schema-Focused model namely the impaired limits dimension may contribute for the conceptualization of cognitive distortions in rapists and further investigation is recommended. Copyright © 2015 Elsevier Ltd. All rights reserved.

A Discussion on Risk in Complex Operational Settings

Energy Technology Data Exchange (ETDEWEB)

Ellis, K., E-mail: ken.ellis@wano.org [WANO, London (United Kingdom)

2014-10-15

Full text: Many apparatus today are complicated in that they consist of many components. The risk associated with these complicated apparatus is a product of their unreliable system components and sub-components. The components are a collection of inter-related individual components/ sub-components that can be correlated in a direct cause and effect manner and thus failures can be historically retraced or predicted. Once the confines of the complicated apparatus is extended to include such inputs as humans operating the equipment, man-machine interfaces, multiple processes surrounding the operation of the apparatus, etc., the whole system becomes complex. Complex systems are based on interdependencies versus dependencies, and risk becomes a product of improperly aligned or poorly integrated activities. Cause and effect becomes more loosely coupled and both path and circumstance dependent. To better understand and improve our defence in depth strategies we need to better understand and discuss complex systems and hence allow better erection of protective barriers. (author)

TPC track distortions III: fiat lux

CERN Document Server

Boyko, I; Dydak, F; Elagin, A; Gostkin, M; Guskov, A; Koreshev, V; Nefedov, Y; Nikolaev, K; Veenhof, R; Wotschack, J; Zhemchugov, A

2005-01-01

We present a comprehensive overview and final summary of all four types of static track distortions seen in the HARP TPC, in terms of physical origins, mathematical modelling, and correction algorithms. 'Static'™ distortions are defined as not depending on the event time within the 400 ms long accelerator spill. Calculated static distortions are compared with measurements from cosmic-muon tracks. We characterize track distortions by the r phi residuals of cluster positions with respect to the transverse projection of a helical trajectory constrained by hits in the RPC overlap regions. This method provides a fixed TPC-external reference system (by contrast to the co-moving coordinate system associated with a fit) which solely permits to identify individually, and measure quantitatively, the static TPC track distortions arising from (i) the inhomogeneity of the solenoidal magnetic field, (ii) the inhomogeneity of the electric field from the high-voltage mismatch between the inner and outer TPC field cages, (...

What determines crime rates? An empirical test of integrated economic and sociological theories of criminal behavior

NARCIS (Netherlands)

Engelen, Peter Jan; Lander, Michel W.; van Essen, Marc

Research on crime has by no means reached a definitive conclusion on which factors are related to crime rates. We contribute to the crime literature by providing an integrated empirical model of economic and sociological theories of criminal behavior and by using a very comprehensive set of

Detection of distorted frames in retinal video-sequences via machine learning

Science.gov (United States)

Kolar, Radim; Liberdova, Ivana; Odstrcilik, Jan; Hracho, Michal; Tornow, Ralf P.

2017-07-01

This paper describes detection of distorted frames in retinal sequences based on set of global features extracted from each frame. The feature vector is consequently used in classification step, in which three types of classifiers are tested. The best classification accuracy 96% has been achieved with support vector machine approach.

Distortions in Judged Spatial Relations.

Science.gov (United States)

Stevens, Albert

1978-01-01

Distortions in judgments of relative geographical relations were observed, particularly when the locations were in different geographical or political units. Subjects distorted the judged relation to conform with the relation of the superordinate political unit. A model for the hierachical storage of spatial information is presented. (Author/RD)

Integration of complex-wide mixed low-level waste activities for program acceleration and optimization

International Nuclear Information System (INIS)

McKenney, D.E.

1998-01-01

In July 1996, the US Department of Energy (DOE) chartered a contractor-led effort to develop a suite of technically defensible, integrated alternatives which would allow the Environmental Management program to accomplish its mission objectives in an accelerated fashion and at a reduced cost. These alternatives, or opportunities, could then be evaluated by DOE and stakeholders for possible implementation, given precursor requirements (regulatory changes, etc.) could be met and benefits to the Complex realized. This contractor effort initially focused on six waste types, one of which was Mixed Low-Level Waste (MLLW). Many opportunities were identified by the contractor team for integrating MLLW activities across the DOE Complex. These opportunities were further narrowed to six that had the most promise for implementation and savings to the DOE Complex. The opportunities include six items: (1) the consolidation of individual site analytical services procurement efforts, (2) the consolidation of individual site MLLW treatment services procurement efforts, (3) establishment of ''de minimus'' radioactivity levels, (4) standardization of characterization requirements, (5) increased utilization of existing DOE treatment facilities, and (6) using a combination of DOE and commercial MLLW disposal capacity. The results of the integration effort showed that by managing MLLW activities across the DOE Complex as a cohesive unit rather than as independent site efforts, the DOE could improve the rate of progress toward meeting its objectives and reduce its overall MLLW program costs. Savings potential for MLLW, if the identified opportunities could be implemented, could total $224 million or more. Implementation of the opportunities also could result in the acceleration of the MLLW ''work off schedule'' across the DOE Complex by five years

Integration of functional complex oxide nanomaterials on silicon

Directory of Open Access Journals (Sweden)

Jose Manuel eVila-Fungueiriño

2015-06-01

Full Text Available The combination of standard wafer-scale semiconductor processing with the properties of functional oxides opens up to innovative and more efficient devices with high value applications that can be produced at large scale. This review uncovers the main strategies that are successfully used to monolithically integrate functional complex oxide thin films and nanostructures on silicon: the chemical solution deposition approach (CSD and the advanced physical vapor deposition techniques such as oxide molecular beam epitaxy (MBE. Special emphasis will be placed on complex oxide nanostructures epitaxially grown on silicon using the combination of CSD and MBE. Several examples will be exposed, with a particular stress on the control of interfaces and crystallization mechanisms on epitaxial perovskite oxide thin films, nanostructured quartz thin films, and octahedral molecular sieve nanowires. This review enlightens on the potential of complex oxide nanostructures and the combination of both chemical and physical elaboration techniques for novel oxide-based integrated devices.

The descriptive set-theoretic complexity of the set of points of continuity of a multi-valued function (Extended Abstract

Directory of Open Access Journals (Sweden)

Vassilios Gregoriades

2010-06-01

Full Text Available In this article we treat a notion of continuity for a multi-valued function F and we compute the descriptive set-theoretic complexity of the set of all x for which F is continuous at x. We give conditions under which the latter set is either a G_delta set or the countable union of G_delta sets. Also we provide a counterexample which shows that the latter result is optimum under the same conditions. Moreover we prove that those conditions are necessary in order to obtain that the set of points of continuity of F is Borel i.e., we show that if we drop some of the previous conditions then there is a multi-valued function F whose graph is a Borel set and the set of points of continuity of F is not a Borel set. Finally we give some analogue results regarding a stronger notion of continuity for a multi-valued function. This article is motivated by a question of M. Ziegler in "Real Computation with Least Discrete Advice: A Complexity Theory of Nonuniform Computability with Applications to Linear Algebra", (submitted.

76 FR 48159 - Integrated System Power Rates

Science.gov (United States)

2011-08-08

... DEPARTMENT OF ENERGY Southwestern Power Administration Integrated System Power Rates AGENCY... American Electric Reliability Corporation and to cover increased investments and replacements in..., prepared a Current Power Repayment Study using existing system rates. The Study indicates that Southwestern...

EasyCloneMulti: A Set of Vectors for Simultaneous and Multiple Genomic Integrations in Saccharomyces cerevisiae

DEFF Research Database (Denmark)

Maury, Jerome; Germann, Susanne Manuela; Jacobsen, Simo Abdessamad

2016-01-01

Saccharomyces cerevisiae is widely used in the biotechnology industry for production of ethanol, recombinant proteins, food ingredients and other chemicals. In order to generate highly producing and stable strains, genome integration of genes encoding metabolic pathway enzymes is the preferred...... of integrative vectors, EasyCloneMulti, that enables multiple and simultaneous integration of genes in S. cerevisiae. By creating vector backbones that combine consensus sequences that aim at targeting subsets of Ty sequences and a quickly degrading selective marker, integrations at multiple genomic loci...... and a range of expression levels were obtained, as assessed with the green fluorescent protein (GFP) reporter system. The EasyCloneMulti vector set was applied to balance the expression of the rate-controlling step in the β-alanine pathway for biosynthesis of 3-hydroxypropionic acid (3HP). The best 3HP...

The Role of Emotion Regulation in Reducing Emotional Distortions of Duration Perception

Directory of Open Access Journals (Sweden)

Yu Tian

2018-03-01

Full Text Available Emotional events, especially negative ones, are consistently reported to last longer than neutral events. Previous studies suggested that this distortion of duration perception is linked to arousal and attention bias in response to emotional events. Reappraisal and suppression, arguably the most effective strategies for emotion regulation, have been demonstrated to decrease such arousal and attention bias. The present study investigated whether reappraisal and suppression can reduce emotional distortions of duration perception. Seventy-eight Chinese undergraduates were recruited as paid participants and randomly assigned to nonregulation, reappraisal, and suppression groups. Before they performed a temporal bisection task involving presentation of emotional pictures for different durations, the groups were each given one of three different sets of instructions requiring them to passively perceive, reappraise, or suppress the emotions of the pictures. The results indicated that the distortion of duration perception occurred only in the nonregulation group, suggesting that it can be effectively reduced by reappraisal and suppression.

On set-valued functionals: Multivariate risk measures and Aumann integrals

Science.gov (United States)

Ararat, Cagin

In this dissertation, multivariate risk measures for random vectors and Aumann integrals of set-valued functions are studied. Both are set-valued functionals with values in a complete lattice of subsets of Rm. Multivariate risk measures are considered in a general d-asset financial market with trading opportunities in discrete time. Specifically, the following features of the market are incorporated in the evaluation of multivariate risk: convex transaction costs modeled by solvency regions, intermediate trading constraints modeled by convex random sets, and the requirement of liquidation into the first m ≤ d of the assets. It is assumed that the investor has a "pure" multivariate risk measure R on the space of m-dimensional random vectors which represents her risk attitude towards the assets but does not take into account the frictions of the market. Then, the investor with a d-dimensional position minimizes the set-valued functional R over all m-dimensional positions that she can reach by trading in the market subject to the frictions described above. The resulting functional Rmar on the space of d-dimensional random vectors is another multivariate risk measure, called the market-extension of R. A dual representation for R mar that decomposes the effects of R and the frictions of the market is proved. Next, multivariate risk measures are studied in a utility-based framework. It is assumed that the investor has a complete risk preference towards each individual asset, which can be represented by a von Neumann-Morgenstern utility function. Then, an incomplete preference is considered for multivariate positions which is represented by the vector of the individual utility functions. Under this structure, multivariate shortfall and divergence risk measures are defined as the optimal values of set minimization problems. The dual relationship between the two classes of multivariate risk measures is constructed via a recent Lagrange duality for set optimization. In

Visual Complexity and Affect: Ratings Reflect More Than Meets the Eye

Science.gov (United States)

Madan, Christopher R.; Bayer, Janine; Gamer, Matthias; Lonsdorf, Tina B.; Sommer, Tobias

2018-01-01

Pictorial stimuli can vary on many dimensions, several aspects of which are captured by the term ‘visual complexity.’ Visual complexity can be described as, “a picture of a few objects, colors, or structures would be less complex than a very colorful picture of many objects that is composed of several components.” Prior studies have reported a relationship between affect and visual complexity, where complex pictures are rated as more pleasant and arousing. However, a relationship in the opposite direction, an effect of affect on visual complexity, is also possible; emotional arousal and valence are known to influence selective attention and visual processing. In a series of experiments, we found that ratings of visual complexity correlated with affective ratings, and independently also with computational measures of visual complexity. These computational measures did not correlate with affect, suggesting that complexity ratings are separately related to distinct factors. We investigated the relationship between affect and ratings of visual complexity, finding an ‘arousal-complexity bias’ to be a robust phenomenon. Moreover, we found this bias could be attenuated when explicitly indicated but did not correlate with inter-individual difference measures of affective processing, and was largely unrelated to cognitive and eyetracking measures. Taken together, the arousal-complexity bias seems to be caused by a relationship between arousal and visual processing as it has been described for the greater vividness of arousing pictures. The described arousal-complexity bias is also of relevance from an experimental perspective because visual complexity is often considered a variable to control for when using pictorial stimuli. PMID:29403412

Visual Complexity and Affect: Ratings Reflect More Than Meets the Eye.

Science.gov (United States)

Madan, Christopher R; Bayer, Janine; Gamer, Matthias; Lonsdorf, Tina B; Sommer, Tobias

2017-01-01

Pictorial stimuli can vary on many dimensions, several aspects of which are captured by the term 'visual complexity.' Visual complexity can be described as, "a picture of a few objects, colors, or structures would be less complex than a very colorful picture of many objects that is composed of several components." Prior studies have reported a relationship between affect and visual complexity, where complex pictures are rated as more pleasant and arousing. However, a relationship in the opposite direction, an effect of affect on visual complexity, is also possible; emotional arousal and valence are known to influence selective attention and visual processing. In a series of experiments, we found that ratings of visual complexity correlated with affective ratings, and independently also with computational measures of visual complexity. These computational measures did not correlate with affect, suggesting that complexity ratings are separately related to distinct factors. We investigated the relationship between affect and ratings of visual complexity, finding an 'arousal-complexity bias' to be a robust phenomenon. Moreover, we found this bias could be attenuated when explicitly indicated but did not correlate with inter-individual difference measures of affective processing, and was largely unrelated to cognitive and eyetracking measures. Taken together, the arousal-complexity bias seems to be caused by a relationship between arousal and visual processing as it has been described for the greater vividness of arousing pictures. The described arousal-complexity bias is also of relevance from an experimental perspective because visual complexity is often considered a variable to control for when using pictorial stimuli.

Distributed Remote Vector Gaussian Source Coding with Covariance Distortion Constraints

DEFF Research Database (Denmark)

Zahedi, Adel; Østergaard, Jan; Jensen, Søren Holdt

2014-01-01

In this paper, we consider a distributed remote source coding problem, where a sequence of observations of source vectors is available at the encoder. The problem is to specify the optimal rate for encoding the observations subject to a covariance matrix distortion constraint and in the presence...

Theories of cognitive distortions in sexual offending: what the current research tells us.

Science.gov (United States)

O Ciardha, Caoilte; Ward, Tony

2013-01-01

Cognitive distortions in sex offenders are specific or general beliefs/attitudes that violate commonly accepted norms of rationality that have been shown to be associated with the onset and maintenance of sexual offending. In this article, we describe the major theories that have been formulated to explain the role of distorted cognition in initiating and maintaining sexual offending. We evaluate each theory in light of a set of theory appraisal criteria and the available empirical research. Finally, we conclude by drawing together the results of this theory evaluation process and highlight the major implications for treatment and future research.

Reframing the challenges to integrated care: a complex-adaptive systems perspective

Directory of Open Access Journals (Sweden)

Peter Tsasis

2012-09-01

Full Text Available Introduction: Despite over two decades of international experience and research on health systems integration, integrated care has not developed widely. We hypothesized that part of the problem may lie in how we conceptualize the integration process and the complex systems within which integrated care is enacted. This study aims to contribute to discourse regarding the relevance and utility of a complex-adaptive systems (CAS perspective on integrated care.Methods: In the Canadian province of Ontario, government mandated the development of fourteen Local Health Integration Networks in 2006. Against the backdrop of these efforts to integrate care, we collected focus group data from a diverse sample of healthcare professionals in the Greater Toronto Area using convenience and snowball sampling. A semi-structured interview guide was used to elicit participant views and experiences of health systems integration. We use a CAS framework to describe and analyze the data, and to assess the theoretical fit of a CAS perspective with the dominant themes in participant responses.Results: Our findings indicate that integration is challenged by system complexity, weak ties and poor alignment among professionals and organizations, a lack of funding incentives to support collaborative work, and a bureaucratic environment based on a command and control approach to management. Using a CAS framework, we identified several characteristics of CAS in our data, including diverse, interdependent and semi-autonomous actors; embedded co-evolutionary systems; emergent behaviours and non-linearity; and self-organizing capacity. Discussion and Conclusion: One possible explanation for the lack of systems change towards integration is that we have failed to treat the healthcare system as complex-adaptive. The data suggest that future integration initiatives must be anchored in a CAS perspective, and focus on building the system's capacity to self-organize. We conclude that

Reframing the challenges to integrated care: a complex-adaptive systems perspective

Directory of Open Access Journals (Sweden)

Peter Tsasis

2012-09-01

Full Text Available Introduction: Despite over two decades of international experience and research on health systems integration, integrated care has not developed widely. We hypothesized that part of the problem may lie in how we conceptualize the integration process and the complex systems within which integrated care is enacted. This study aims to contribute to discourse regarding the relevance and utility of a complex-adaptive systems (CAS perspective on integrated care. Methods: In the Canadian province of Ontario, government mandated the development of fourteen Local Health Integration Networks in 2006. Against the backdrop of these efforts to integrate care, we collected focus group data from a diverse sample of healthcare professionals in the Greater Toronto Area using convenience and snowball sampling. A semi-structured interview guide was used to elicit participant views and experiences of health systems integration. We use a CAS framework to describe and analyze the data, and to assess the theoretical fit of a CAS perspective with the dominant themes in participant responses. Results: Our findings indicate that integration is challenged by system complexity, weak ties and poor alignment among professionals and organizations, a lack of funding incentives to support collaborative work, and a bureaucratic environment based on a command and control approach to management. Using a CAS framework, we identified several characteristics of CAS in our data, including diverse, interdependent and semi-autonomous actors; embedded co-evolutionary systems; emergent behaviours and non-linearity; and self-organizing capacity.  Discussion and Conclusion: One possible explanation for the lack of systems change towards integration is that we have failed to treat the healthcare system as complex-adaptive. The data suggest that future integration initiatives must be anchored in a CAS perspective, and focus on building the system's capacity to self-organize. We conclude that

Computing sextic centrifugal distortion constants by DFT: A benchmark analysis on halogenated compounds

Science.gov (United States)

Pietropolli Charmet, Andrea; Stoppa, Paolo; Tasinato, Nicola; Giorgianni, Santi

2017-05-01

This work presents a benchmark study on the calculation of the sextic centrifugal distortion constants employing cubic force fields computed by means of density functional theory (DFT). For a set of semi-rigid halogenated organic compounds several functionals (B2PLYP, B3LYP, B3PW91, M06, M06-2X, O3LYP, X3LYP, ωB97XD, CAM-B3LYP, LC-ωPBE, PBE0, B97-1 and B97-D) were used for computing the sextic centrifugal distortion constants. The effects related to the size of basis sets and the performances of hybrid approaches, where the harmonic data obtained at higher level of electronic correlation are coupled with cubic force constants yielded by DFT functionals, are presented and discussed. The predicted values were compared to both the available data published in the literature and those obtained by calculations carried out at increasing level of electronic correlation: Hartree-Fock Self Consistent Field (HF-SCF), second order Møller-Plesset perturbation theory (MP2), and coupled-cluster single and double (CCSD) level of theory. Different hybrid approaches, having the cubic force field computed at DFT level of theory coupled to harmonic data computed at increasing level of electronic correlation (up to CCSD level of theory augmented by a perturbational estimate of the effects of connected triple excitations, CCSD(T)) were considered. The obtained results demonstrate that they can represent reliable and computationally affordable methods to predict sextic centrifugal terms with an accuracy almost comparable to that yielded by the more expensive anharmonic force fields fully computed at MP2 and CCSD levels of theory. In view of their reduced computational cost, these hybrid approaches pave the route to the study of more complex systems.

The Dark Side of Context: Context Reinstatement Can Distort Memory.

Science.gov (United States)

Doss, Manoj K; Picart, Jamila K; Gallo, David A

2018-04-01

It is widely assumed that context reinstatement benefits memory, but our experiments revealed that context reinstatement can systematically distort memory. Participants viewed pictures of objects superimposed over scenes, and we later tested their ability to differentiate these old objects from similar new objects. Context reinstatement was manipulated by presenting objects on the reinstated or switched scene at test. Not only did context reinstatement increase correct recognition of old objects, but it also consistently increased incorrect recognition of similar objects as old ones. This false recognition effect was robust, as it was found in several experiments, occurred after both immediate and delayed testing, and persisted with high confidence even after participants were warned to avoid the distorting effects of context. To explain this memory illusion, we propose that context reinstatement increases the likelihood of confusing conceptual and perceptual information, potentially in medial temporal brain regions that integrate this information.

Integration: valuing stakeholder input in setting priorities for socially sustainable egg production.

Science.gov (United States)

Swanson, J C; Lee, Y; Thompson, P B; Bawden, R; Mench, J A

2011-09-01

Setting directions and goals for animal production systems requires the integration of information achieved through internal and external processes. The importance of stakeholder input in setting goals for sustainable animal production systems should not be overlooked by the agricultural animal industries. Stakeholders play an integral role in setting the course for many aspects of animal production, from influencing consumer preferences to setting public policy. The Socially Sustainable Egg Production Project (SSEP) involved the development of white papers on various aspects of egg production, followed by a stakeholder workshop to help frame the issues for the future of sustainable egg production. Representatives from the environmental, food safety, food retail, consumer, animal welfare, and the general farm and egg production sectors participated with members of the SSEP coordination team in a 1.5-d workshop to explore socially sustainable egg production. This paper reviews the published literature on values integration methodologies and the lessons learned from animal welfare assessment models. The integration method used for the SSEP stakeholder workshop and its outcome are then summarized. The method used for the SSEP stakeholder workshop can be used to obtain stakeholder input on sustainable production in other farm animal industries.

Study Protocol on Intentional Distortion in Personality Assessment: Relationship with Test Format, Culture, and Cognitive Ability.

Science.gov (United States)

Van Geert, Eline; Orhon, Altan; Cioca, Iulia A; Mamede, Rui; Golušin, Slobodan; Hubená, Barbora; Morillo, Daniel

2016-01-01

Self-report personality questionnaires, traditionally offered in a graded-scale format, are widely used in high-stakes contexts such as job selection. However, job applicants may intentionally distort their answers when filling in these questionnaires, undermining the validity of the test results. Forced-choice questionnaires are allegedly more resistant to intentional distortion compared to graded-scale questionnaires, but they generate ipsative data. Ipsativity violates the assumptions of classical test theory, distorting the reliability and construct validity of the scales, and producing interdependencies among the scores. This limitation is overcome in the current study by using the recently developed Thurstonian item response theory model. As online testing in job selection contexts is increasing, the focus will be on the impact of intentional distortion on personality questionnaire data collected online. The present study intends to examine the effect of three different variables on intentional distortion: (a) test format (graded-scale versus forced-choice); (b) culture, as data will be collected in three countries differing in their attitudes toward intentional distortion (the United Kingdom, Serbia, and Turkey); and (c) cognitive ability, as a possible predictor of the ability to choose the more desirable responses. Furthermore, we aim to integrate the findings using a comprehensive model of intentional distortion. In the Anticipated Results section, three main aspects are considered: (a) the limitations of the manipulation, theoretical approach, and analyses employed; (b) practical implications for job selection and for personality assessment in a broader sense; and (c) suggestions for further research.

Analysis of thermal coal pricing and the coal price distortion in China from the perspective of market forces

International Nuclear Information System (INIS)

Cui, Herui; Wei, Pengbang

2017-01-01

The price of thermal coal has always been the focus of the debate between coal mining industry and electric power industry. The thermal coal price is always lower than other same quality coal, and this phenomenon of thermal coal price distortion has been existing in China for a long time. The distortion coal price can not reflect the external cost and the resource scarcity of coal, which could result in environment deteriorating and inefficient resource allocation. This paper studied the phenomenon of thermal coal price distortion through economic theoretical modeling and empirical cointegration analysis from the perspective of market forces. The results show that thermal coal price is determined by electricity price, the prediction elasticity of a electricity enterprise, price elasticity of demand of electricity, the input prediction elasticity of a electricity enterprise and the price elasticity of supply of thermal coal. The main reason of coal price distortion is the unbalance market force of coal industry and thermal coal generation industry. The distortion rate of coal price is positively related to the market force of electric power industry and negatively related to the industrial concentration of coal industry. - Highlights: • This paper studied thermal coal pricing and the coal price distortion in China. • The main reason of coal price distortion is the unbalance market force. • Thermal coal price is also influenced by electricity price and price elasticity of demand of electricity. • The distortion rate of coal price is negatively related to the industrial concentration of coal industry.

Distortional Modes of Thin-Walled Beams

DEFF Research Database (Denmark)

Jönsson, Jeppe; Andreassen, Michael Joachim

2009-01-01

The classic thin-walled beam theory for open and closed cross-sections can be generalized by including distortional displacement modes. The introduction of additional displacement modes leads to coupled differential equations, which seems to have prohibited the use of exact shape functions...... in the modelling of coupled torsion and distortion. However, if the distortional displacement modes are chosen as those which decouple the differential equations as in non proportionally damped modal dynamic analysis then it may be possible to use exact shape functions and perform analysis on a reduced problem....... In the recently developed generalized beam theory (GBT) the natural distortional displacement modes are determined on the basis of a quadratic eigenvalue problem. However, as in linear modal dynamic analysis of proportionally damped structures this problem has been solved approximately using linear eigenvalue...

Visual Complexity and Affect: Ratings Reflect More Than Meets the Eye

Directory of Open Access Journals (Sweden)

Christopher R. Madan

2018-01-01

Full Text Available Pictorial stimuli can vary on many dimensions, several aspects of which are captured by the term ‘visual complexity.’ Visual complexity can be described as, “a picture of a few objects, colors, or structures would be less complex than a very colorful picture of many objects that is composed of several components.” Prior studies have reported a relationship between affect and visual complexity, where complex pictures are rated as more pleasant and arousing. However, a relationship in the opposite direction, an effect of affect on visual complexity, is also possible; emotional arousal and valence are known to influence selective attention and visual processing. In a series of experiments, we found that ratings of visual complexity correlated with affective ratings, and independently also with computational measures of visual complexity. These computational measures did not correlate with affect, suggesting that complexity ratings are separately related to distinct factors. We investigated the relationship between affect and ratings of visual complexity, finding an ‘arousal-complexity bias’ to be a robust phenomenon. Moreover, we found this bias could be attenuated when explicitly indicated but did not correlate with inter-individual difference measures of affective processing, and was largely unrelated to cognitive and eyetracking measures. Taken together, the arousal-complexity bias seems to be caused by a relationship between arousal and visual processing as it has been described for the greater vividness of arousing pictures. The described arousal-complexity bias is also of relevance from an experimental perspective because visual complexity is often considered a variable to control for when using pictorial stimuli.

Simulation of Welding Distortions in Theory and Practice

DEFF Research Database (Denmark)

Birk-Sørensen, Martin; Kierkegaard, Henning

1997-01-01

by an optimised welding order. Welding test samples prove that the constraint of the sample and the time between each pass in a multipass weld affect the magnitude of distortion. Experiments with welding specimens in the form of butt-and fillet welds have been carried out. They show angular deflections as well......In the last few years the use of robot welding processes has increased significatnly. The programming of the robots has until now mainly focused on high efficiency, i.e.high torch rate time, and hence, minimising the inefficient "travelling" time. Together with developing high-performance welding...... due to cutting and welding and parlty in the form of dimensional variation due to human factors. Measurements have been made of the production line for assemblies. The measurements show that distortions related to the multirobot welding are a factor which can rather easily be controlled...

Experimental Investigation of Inlet Distortion in a Multistage Axial Compressor

Science.gov (United States)

Rusu, Razvan

pressure flow field characterization of the AIP was performed using the selected screen at nominal, low, and high compressor loading. Thermal anemometry was used to characterize the spatial variation in turbulence intensity at the AIP in an effort to further define inlet boundary conditions for future computational investigations. Two data acquisition methods for the study of distortion propagation and attenuation were utilized in this study. The first method approximated the bulk flow through each vane passage using a single rake measurement positioned near the center of the passage. All vane passages were measured virtually by rotating the distortion upstream by an increment equal to one vane passage. This method proved successful in tracking the distortion propagation and attenuation from the AIP up until the compressor exit. A second, more detailed, inter-stage flow field characterization method was used that generated a total pressure field with a circumferential resolution of 880 increments, or one every 0.41°. The resulting fields demonstrated the importance of secondary flows in the propagation of a total pressure distortion at the different loading conditions investigated. A second objective of this research was to document proposals and design efforts to outfit the existing P3S research compressor with a strain gage telemetry system. The purpose of this system is to validate and supplement existing blade tip timing data on the embedded rotor stage to support the development and validation of novel aeromechanical analysis tools. Integration strategies and telemetry considerations are discussed based on proposals and consultation provided by suppliers.

An analytical examination of distortions in power spectra due to sampling errors

International Nuclear Information System (INIS)

Njau, E.C.

1982-06-01

Distortions introduced into spectral energy densities of sinusoid signals as well as those of more complex signals through different forms of errors in signal sampling are developed and shown analytically. The approach we have adopted in doing this involves, firstly, developing for each type of signal and for the corresponding form of sampling errors an analytical expression that gives the faulty digitization process involved in terms of the features of the particular signal. Secondly, we take advantage of a method described elsewhere [IC/82/44] to relate, as much as possible, the true spectral energy density of the signal and the corresponding spectral energy density of the faulty digitization process. Thirdly, we then develop expressions which reveal the distortions that are formed in the directly computed spectral energy density of the digitized signal. It is evident from the formulations developed herein that the types of sampling errors taken into consideration may create false peaks and other distortions that are of non-negligible concern in computed power spectra. (author)

Social Work Student and Practitioner Roles in Integrated Care Settings.

Science.gov (United States)

Fraher, Erin P; Richman, Erica Lynn; Zerden, Lisa de Saxe; Lombardi, Brianna

2018-06-01

Social workers are increasingly being deployed in integrated medical and behavioral healthcare settings but information about the roles they fill in these settings is not well understood. This study sought to identify the functions that social workers perform in integrated settings and identify where they acquired the necessary skills to perform them. Master of social work students (n=21) and their field supervisors (n=21) who were part of a Health Resources and Services Administration-funded program to train and expand the behavioral health workforce in integrated settings were asked how often they engaged in 28 functions, where they learned to perform those functions, and the degree to which their roles overlapped with others on the healthcare team. The most frequent functions included employing cultural competency, documenting in the electronic health record, addressing patient social determinants of health, and participating in team-based care. Respondents were least likely to engage in case conferences; use Screening, Brief Intervention and Referral to Treatment; use stepped care to determine necessary level of treatment; conduct functional assessments of daily living skills; use behavioral activation; and use problem-solving therapy. A total of 80% of respondents reported that their roles occasionally, often, very often, or always overlapped with others on the healthcare team. Students reported learning the majority of skills (76%) in their Master of Social Work programs. Supervisors attributed the majority (65%) of their skill development to on-the-job training. Study findings suggest the need to redesign education, regulatory, and payment to better support the deployment of social workers in integrated care settings. This article is part of a supplement entitled The Behavioral Health Workforce: Planning, Practice, and Preparation, which is sponsored by the Substance Abuse and Mental Health Services Administration and the Health Resources and Services

Detection of chromatic and luminance distortions in natural scenes.

Science.gov (United States)

Jennings, Ben J; Wang, Karen; Menzies, Samantha; Kingdom, Frederick A A

2015-09-01

A number of studies have measured visual thresholds for detecting spatial distortions applied to images of natural scenes. In one study, Bex [J. Vis.10(2), 1 (2010)10.1167/10.2.231534-7362] measured sensitivity to sinusoidal spatial modulations of image scale. Here, we measure sensitivity to sinusoidal scale distortions applied to the chromatic, luminance, or both layers of natural scene images. We first established that sensitivity does not depend on whether the undistorted comparison image was of the same or of a different scene. Next, we found that, when the luminance but not chromatic layer was distorted, performance was the same regardless of whether the chromatic layer was present, absent, or phase-scrambled; in other words, the chromatic layer, in whatever form, did not affect sensitivity to the luminance layer distortion. However, when the chromatic layer was distorted, sensitivity was higher when the luminance layer was intact compared to when absent or phase-scrambled. These detection threshold results complement the appearance of periodic distortions of the image scale: when the luminance layer is distorted visibly, the scene appears distorted, but when the chromatic layer is distorted visibly, there is little apparent scene distortion. We conclude that (a) observers have a built-in sense of how a normal image of a natural scene should appear, and (b) the detection of distortion in, as well as the apparent distortion of, natural scene images is mediated predominantly by the luminance layer and not chromatic layer.

Integrating technology into complex intervention trial processes: a case study.

Science.gov (United States)

Drew, Cheney J G; Poile, Vincent; Trubey, Rob; Watson, Gareth; Kelson, Mark; Townson, Julia; Rosser, Anne; Hood, Kerenza; Quinn, Lori; Busse, Monica

2016-11-17

Trials of complex interventions are associated with high costs and burdens in terms of paperwork, management, data collection, validation, and intervention fidelity assessment occurring across multiple sites. Traditional data collection methods rely on paper-based forms, where processing can be time-consuming and error rates high. Electronic source data collection can potentially address many of these inefficiencies, but has not routinely been used in complex intervention trials. Here we present the use of an on-line system for managing all aspects of data handling and for the monitoring of trial processes in a multicentre trial of a complex intervention. We custom built a web-accessible software application for the delivery of ENGAGE-HD, a multicentre trial of a complex physical therapy intervention. The software incorporated functionality for participant randomisation, data collection and assessment of intervention fidelity. It was accessible to multiple users with differing levels of access depending on required usage or to maintain blinding. Each site was supplied with a 4G-enabled iPad for accessing the system. The impact of this system was quantified through review of data quality and collation of feedback from site coordinators and assessors through structured process interviews. The custom-built system was an efficient tool for collecting data and managing trial processes. Although the set-up time required was significant, using the system resulted in an overall data completion rate of 98.5% with a data query rate of 0.1%, the majority of which were resolved in under a week. Feedback from research staff indicated that the system was highly acceptable for use in a research environment. This was a reflection of the portability and accessibility of the system when using the iPad and its usefulness in aiding accurate data collection, intervention fidelity and general administration. A combination of commercially available hardware and a bespoke online database

Decreasing Distortion Energies without Strain: Diazo-Selective 1,3-Dipolar Cycloadditions.

Science.gov (United States)

Gold, Brian; Aronoff, Matthew R; Raines, Ronald T

2016-07-15

The diazo group has attributes that complement those of the azido group for applications in chemical biology. Here, we use computational analyses to provide insights into the chemoselectivity of the diazo group in 1,3-dipolar cycloadditions. Dipole distortion energies are responsible for ∼80% of the overall energetic barrier for these reactions. Here, we show that diazo compounds, unlike azides, provide an opportunity to decrease that barrier substantially without introducing strain into the dipolarophile. The ensuing rate enhancement is due to the greater nucleophilic character of a diazo group compared to that of an azido group, which can accommodate decreased distortion energies without predistortion. The tuning of distortion energies with substituents in a diazo compound or dipolarophile can enhance reactivity and selectivity in a predictable manner. Notably, these advantages of diazo groups are amplified in water. Our findings provide a theoretical framework that can guide the design and application of both diazo compounds and azides in "orthogonal" contexts, especially for biological investigations.

Data mining in large sets of complex data

CERN Document Server

Cordeiro, Robson L F; Júnior, Caetano Traina

2013-01-01

The amount and the complexity of the data gathered by current enterprises are increasing at an exponential rate. Consequently, the analysis of Big Data is nowadays a central challenge in Computer Science, especially for complex data. For example, given a satellite image database containing tens of Terabytes, how can we find regions aiming at identifying native rainforests, deforestation or reforestation? Can it be made automatically? Based on the work discussed in this book, the answers to both questions are a sound "yes", and the results can be obtained in just minutes. In fact, results that

Image Registration to Compensate for EPI Distortion in Patients with Brain Tumors: An Evaluation of Tract-Specific Effects.

Science.gov (United States)

Albi, Angela; Meola, Antonio; Zhang, Fan; Kahali, Pegah; Rigolo, Laura; Tax, Chantal M W; Ciris, Pelin Aksit; Essayed, Walid I; Unadkat, Prashin; Norton, Isaiah; Rathi, Yogesh; Olubiyi, Olutayo; Golby, Alexandra J; O'Donnell, Lauren J

2018-03-01

Diffusion magnetic resonance imaging (dMRI) provides preoperative maps of neurosurgical patients' white matter tracts, but these maps suffer from echo-planar imaging (EPI) distortions caused by magnetic field inhomogeneities. In clinical neurosurgical planning, these distortions are generally not corrected and thus contribute to the uncertainty of fiber tracking. Multiple image processing pipelines have been proposed for image-registration-based EPI distortion correction in healthy subjects. In this article, we perform the first comparison of such pipelines in neurosurgical patient data. Five pipelines were tested in a retrospective clinical dMRI dataset of 9 patients with brain tumors. Pipelines differed in the choice of fixed and moving images and the similarity metric for image registration. Distortions were measured in two important tracts for neurosurgery, the arcuate fasciculus and corticospinal tracts. Significant differences in distortion estimates were found across processing pipelines. The most successful pipeline used dMRI baseline and T2-weighted images as inputs for distortion correction. This pipeline gave the most consistent distortion estimates across image resolutions and brain hemispheres. Quantitative results of mean tract distortions on the order of 1-2 mm are in line with other recent studies, supporting the potential need for distortion correction in neurosurgical planning. Novel results include significantly higher distortion estimates in the tumor hemisphere and greater effect of image resolution choice on results in the tumor hemisphere. Overall, this study demonstrates possible pitfalls and indicates that care should be taken when implementing EPI distortion correction in clinical settings. Copyright © 2018 by the American Society of Neuroimaging.

Mapping flow distortion on oceanographic platforms using computational fluid dynamics

Directory of Open Access Journals (Sweden)

N. O'Sullivan

2013-10-01

Full Text Available Wind speed measurements over the ocean on ships or buoys are affected by flow distortion from the platform and by the anemometer itself. This can lead to errors in direct measurements and the derived parametrisations. Here we computational fluid dynamics (CFD to simulate the errors in wind speed measurements caused by flow distortion on the RV Celtic Explorer. Numerical measurements were obtained from the finite-volume CFD code OpenFOAM, which was used to simulate the velocity fields. This was done over a range of orientations in the test domain from −60 to +60° in increments of 10°. The simulation was also set up for a range of velocities, ranging from 5 to 25 m s−1 in increments of 0.5 m s−1. The numerical analysis showed close agreement to experimental measurements.

The use of an integrated variable fuzzy sets in water resources management

Science.gov (United States)

Qiu, Qingtai; Liu, Jia; Li, Chuanzhe; Yu, Xinzhe; Wang, Yang

2018-06-01

Based on the evaluation of the present situation of water resources and the development of water conservancy projects and social economy, optimal allocation of regional water resources presents an increasing need in the water resources management. Meanwhile it is also the most effective way to promote the harmonic relationship between human and water. In view of the own limitations of the traditional evaluations of which always choose a single index model using in optimal allocation of regional water resources, on the basis of the theory of variable fuzzy sets (VFS) and system dynamics (SD), an integrated variable fuzzy sets model (IVFS) is proposed to address dynamically complex problems in regional water resources management in this paper. The model is applied to evaluate the level of the optimal allocation of regional water resources of Zoucheng in China. Results show that the level of allocation schemes of water resources ranging from 2.5 to 3.5, generally showing a trend of lower level. To achieve optimal regional management of water resources, this model conveys a certain degree of accessing water resources management, which prominently improve the authentic assessment of water resources management by using the eigenvector of level H.

The Complexity integrated-Instruments components media of IPA at Elementary School

Directory of Open Access Journals (Sweden)

Angreni Siska

2018-01-01

Full Text Available This research aims at describing the complexity of Integrated Instrument Components media (CII in learning of science at Elementary schools in District Siulak Mukai and at Elementary schools in District Siulak. The research applied a descriptive method which included survey forms. Instruments used were observation sheets. The result of the research showed Integrated Instrument Components media (CII natural science that complexity at primary school district Siulak was more complex compared with that at primary school district Siulak Mukai. is better than from primary school district Mukai

Complexities of Providing Dental Hygiene Services in Community Care Settings.

Science.gov (United States)

Zarkowski, Pamela; Aksu, Mert N

2016-06-01

Direct access care provided by dental hygienists can reduce oral health disparities for the underserved, yet legal, regulatory, and ethical considerations create complexities and limits. Individual state dental practice acts regulate the scope of practice and level of supervision required when dental hygienists deliver care. Yet, inconsistent state practice act regulations contribute to ethical and legal limitations and dilemmas for practitioners. The dental hygienist is positioned to assume an increasingly larger role in the management of oral health disparities. However, there are several legal and ethical considerations that impact both dental hygienists and dentists providing care in complex community settings. This article informs dental hygienists and other related constituencies about conundrums that are encountered when providing care 'beyond the operatory.' An evidence-based view of ways in which dental hygienists are reducing oral health disparities illustrates the complex issues involved in providing such care. Potential scenarios that can occur during care provision in underserved settings provide the basis for a discussion of legal and other associated issues impacting dental hygiene practice. Copyright © 2016 Elsevier Inc. All rights reserved.

Spectroscopic characterization of some Cu(II) complexes

International Nuclear Information System (INIS)

Singh, Puja; Sharma, S.

2014-01-01

3-hydroxy-4-methoxy benzaldehyde semicarbazone (HMBS) is a biologically active compound which has several potential donor sites. This compound has been used for complexation with Cu(II) ions to synthesize complexes of general formula [Cu(HMBS) 2 X 2 ] where X is Cl − , NO 3 − and CH 3 COO − . Cu(II) is a d 9 system for which 2 D term is generated. Under O h symmetry, this term splits into 2 E g and 2 T 2g . the ground term 2 Eg is doubly degenerate and hence suffers strong Jahn-Teller effect and accordingly the further splitting of terms occur to lower the symmetry from perfect O h . Here, the ligand occupies four planar positions while the two axial positions have been varied by using different ions like Cl − , NO 3 − and CH 3 COO − . These variations on the axial positions also add to the distortion in O h symmetry. Under strong distortion, the electronic spectral band splits into multiplets exhibiting tetragonal distortion in complexes. The extent of distortion has been derived by the derivation of the two radial parameters D s and D t from electronic spectral bands. The ESR spectra of complexes reveal the real position of the only unpaired electron of the d 9 system in complexes

Effect of quantum well position on the distortion characteristics of transistor laser

Science.gov (United States)

Piramasubramanian, S.; Ganesh Madhan, M.; Radha, V.; Shajithaparveen, S. M. S.; Nivetha, G.

2018-05-01

The effect of quantum well position on the modulation and distortion characteristics of a 1300 nm transistor laser is analyzed in this paper. Standard three level rate equations are numerically solved to study this characteristics. Modulation depth, second order harmonic and third order intermodulation distortion of the transistor laser are evaluated for different quantum well positions for a 900 MHz RF signal modulation. From the DC analysis, it is observed that optical power is maximum, when the quantum well is positioned near base-emitter interface. The threshold current of the device is found to increase with increasing the distance between the quantum well and the base-emitter junction. A maximum modulation depth of 0.81 is predicted, when the quantum well is placed at 10 nm from the base-emitter junction, under RF modulation. The magnitude of harmonic and intermodulation distortion are found to decrease with increasing current and with an increase in quantum well distance from the emitter base junction. A minimum second harmonic distortion magnitude of -25.96 dBc is predicted for quantum well position (230 nm) near to the base-collector interface for 900 MHz modulation frequency at a bias current of 20 Ibth. Similarly, a minimum third order intermodulation distortion of -38.2 dBc is obtained for the same position and similar biasing conditions.

The integrable case of Adler-van Moerbeke. Discriminant set and bifurcation diagram

Science.gov (United States)

Ryabov, Pavel E.; Oshemkov, Andrej A.; Sokolov, Sergei V.

2016-09-01

The Adler-van Moerbeke integrable case of the Euler equations on the Lie algebra so(4) is investigated. For the L- A pair found by Reyman and Semenov-Tian-Shansky for this system, we explicitly present a spectral curve and construct the corresponding discriminant set. The singularities of the Adler-van Moerbeke integrable case and its bifurcation diagram are discussed. We explicitly describe singular points of rank 0, determine their types, and show that the momentum mapping takes them to self-intersection points of the real part of the discriminant set. In particular, the described structure of singularities of the Adler-van Moerbeke integrable case shows that it is topologically different from the other known integrable cases on so(4).

Applying image quality in cell phone cameras: lens distortion

Science.gov (United States)

Baxter, Donald; Goma, Sergio R.; Aleksic, Milivoje

2009-01-01

This paper describes the framework used in one of the pilot studies run under the I3A CPIQ initiative to quantify overall image quality in cell-phone cameras. The framework is based on a multivariate formalism which tries to predict overall image quality from individual image quality attributes and was validated in a CPIQ pilot program. The pilot study focuses on image quality distortions introduced in the optical path of a cell-phone camera, which may or may not be corrected in the image processing path. The assumption is that the captured image used is JPEG compressed and the cellphone camera is set to 'auto' mode. As the used framework requires that the individual attributes to be relatively perceptually orthogonal, in the pilot study, the attributes used are lens geometric distortion (LGD) and lateral chromatic aberrations (LCA). The goal of this paper is to present the framework of this pilot project starting with the definition of the individual attributes, up to their quantification in JNDs of quality, a requirement of the multivariate formalism, therefore both objective and subjective evaluations were used. A major distinction in the objective part from the 'DSC imaging world' is that the LCA/LGD distortions found in cell-phone cameras, rarely exhibit radial behavior, therefore a radial mapping/modeling cannot be used in this case.

Memory of AMR coded speech distorted by packet loss

OpenAIRE

Nykänen, Arne; Lindegren, David; Wruck, Louisa; Ljung, Robert; Odelius, Johan; Möller, Sebastian

2014-01-01

Previous studies have shown that free recall of spoken word lists is impaired if the speech is presented in background noise, even if the signal-to-noise ratio is kept at a level allowing full word identification. The objective of this study was to examine recall rates for word lists presented in noise and word lists coded by an AMR (Adaptive Multi Rate) telephone codec distorted by packet loss. Twenty subjects performed a word recall test. Word lists consisting of ten words were played to th...

Fast H.264/AVC FRExt intra coding using belief propagation.

Science.gov (United States)

Milani, Simone

2011-01-01

In the H.264/AVC FRExt coder, the coding performance of Intra coding significantly overcomes the previous still image coding standards, like JPEG2000, thanks to a massive use of spatial prediction. Unfortunately, the adoption of an extensive set of predictors induces a significant increase of the computational complexity required by the rate-distortion optimization routine. The paper presents a complexity reduction strategy that aims at reducing the computational load of the Intra coding with a small loss in the compression performance. The proposed algorithm relies on selecting a reduced set of prediction modes according to their probabilities, which are estimated adopting a belief-propagation procedure. Experimental results show that the proposed method permits saving up to 60 % of the coding time required by an exhaustive rate-distortion optimization method with a negligible loss in performance. Moreover, it permits an accurate control of the computational complexity unlike other methods where the computational complexity depends upon the coded sequence.

Impact of Background Noise and Sentence Complexity on Processing Demands during Sentence Comprehension

DEFF Research Database (Denmark)

Wendt, Dorothea; Dau, Torsten; Hjortkjær, Jens

2016-01-01

Speech comprehension in adverse listening conditions can be effortful even when speech is fully intelligible. Acoustical distortions typically make speech comprehension more effortful, but effort also depends on linguistic aspects of the speech signal, such as its syntactic complexity....... In the present study, pupil dilations, and subjective effort ratings were recorded in 20 normal-hearing participants while performing a sentence comprehension task. The sentences were either syntactically simple (subject-first sentence structure) or complex (object-first sentence structure) and were presented...... and less by syntactic complexity. Conversely, pupil dilations increased with syntactic complexity but only showed a small effect of the noise level. Participants with higher WMC showed increased pupil responses in the higher-level noise condition but rated sentence comprehension as being less effortful...

Regulation of adeno-associated virus DNA replication by the cellular TAF-I/set complex.

Science.gov (United States)

Pegoraro, Gianluca; Marcello, Alessandro; Myers, Michael P; Giacca, Mauro

2006-07-01

The Rep proteins of the adeno-associated virus (AAV) are required for viral replication in the presence of adenovirus helper functions and as yet poorly characterized cellular factors. In an attempt to identify such factors, we purified Flag-Rep68-interacting proteins from human cell lysates. Several polypeptides were identified by mass spectrometry, among which was ANP32B, a member of the acidic nuclear protein 32 family which takes part in the formation of the template-activating factor I/Set oncoprotein (TAF-I/Set) complex. The N terminus of Rep was found to specifically bind the acidic domain of ANP32B; through this interaction, Rep was also able to recruit other members of the TAF-I/Set complex, including the ANP32A protein and the histone chaperone TAF-I/Set. Further experiments revealed that silencing of ANP32A and ANP32B inhibited AAV replication, while overexpression of all of the components of the TAF-I/Set complex increased de novo AAV DNA synthesis in permissive cells. Besides being the first indication that the TAF-I/Set complex participates in wild-type AAV replication, these findings have important implications for the generation of recombinant AAV vectors since overexpression of the TAF-I/Set components was found to markedly increase viral vector production.

Projective aspects on cognitive performance: distortions in emotional perception correlate with personality

Directory of Open Access Journals (Sweden)

Fabiano Koich Miguel

2016-01-01

Full Text Available Abstract Several approaches in psychology converge with the concept that individual characteristics may interfere with the perception and interpretation of the world. We hypothesized that such phenomenon could be identified in instruments that were not only projective techniques. The research’s goal was to study perceptive distortions in a cognitive test and their relations with personality instruments. Responses from 222 participants in the Computerized Test of Primary Emotions Perception (PEP were rated in distortion scores, which related to perceiving emotions that were not present. We used Spearman correlations between these scores and the Rorschach Inkblot test, Dimensional Clinical Personality Inventory, and tasks of Verbal and Abstract Reasoning. Results showed that the distortions were not related to intellectual abilities. Distortions of joy were associated with greater interest in interpersonal contact; love with positive view of the interactions and need for attention; fear with concerns about aggressiveness and autonomy; sadness with lower perception of damaged objects; disgust with feelings of loneliness; and anger with criticism avoidance, distrust, feelings of loneliness, and aggressive behaviour. The results support the proposal that altered perception of reality is related to affective or personality characteristics.

Evaluation of Distortion in Welding Unions of 304 Stainless Steel with Elliptic Trajectory Using a Welding Robot

Science.gov (United States)

Carrasco-González, L. A.; Hurtado-Delgado, E.; Reyes-Valdés, F. A.

The aim of this investigation is to evaluate the distortions generated in welding unions of stainless steel 304 by effect of the welding temperature and the microestructural changes. The joint design is a 100 × 100 mm steel plate of 3 mm thickness. The plate was joined to a tube of 50 mm diameter and 2 mm thickness, which has a defined angular cut; therefore, the trajectory followed by the seam has an elliptic form. Temperature data acquisition was developed by type K thermocouples, placed in pairs at 0°, 90°, 180° and 270° along the welding trajectory and connected to a data acquisition device yo obtain the measures to generate time-temperature plots. The welding process was executed by a KUKA ®; KR16 welding robot with an integrated GMAW (Gas metal arc welding) process where the input parameters of voltage, wire feed and travel speed are set to constant. The distortion of the work piece was measured using a laser scanning technique that generates a point cloud with the VXelements TM software for comparison between the pre and post-weld condition. Microstructural evaluation was performed on transversal sections of the seam, at the mentioned angles for correlation.

Sources of PCR-induced distortions in high-throughput sequencing data sets

Science.gov (United States)

Kebschull, Justus M.; Zador, Anthony M.

2015-01-01

PCR permits the exponential and sequence-specific amplification of DNA, even from minute starting quantities. PCR is a fundamental step in preparing DNA samples for high-throughput sequencing. However, there are errors associated with PCR-mediated amplification. Here we examine the effects of four important sources of error—bias, stochasticity, template switches and polymerase errors—on sequence representation in low-input next-generation sequencing libraries. We designed a pool of diverse PCR amplicons with a defined structure, and then used Illumina sequencing to search for signatures of each process. We further developed quantitative models for each process, and compared predictions of these models to our experimental data. We find that PCR stochasticity is the major force skewing sequence representation after amplification of a pool of unique DNA amplicons. Polymerase errors become very common in later cycles of PCR but have little impact on the overall sequence distribution as they are confined to small copy numbers. PCR template switches are rare and confined to low copy numbers. Our results provide a theoretical basis for removing distortions from high-throughput sequencing data. In addition, our findings on PCR stochasticity will have particular relevance to quantification of results from single cell sequencing, in which sequences are represented by only one or a few molecules. PMID:26187991

Sonographic ally Detected Architectural Distortion: Clinical Significance

Energy Technology Data Exchange (ETDEWEB)

Kim, Shin Kee; Seo, Bo Kyoung; Yi, Ann; Cha, Sang Hoon; Kim, Baek Hyun; Cho, Kyu Ran; Kim, Young Sik; Son, Gil Soo; Kim, Young Soo; Kim, Hee Young [Korea University Ansan Hospital, Ansan (Korea, Republic of)

2008-12-15

Architectural distortion is a suspicious abnormality for the diagnosis of breast cancer. The aim of this study was to investigate the clinical significance of sonographic ally detected architectural distortion. From January 2006 to June 2008, 20 patients were identified who had sonographic ally detected architectural distortions without a history of trauma or surgery and abnormal mammographic findings related to an architectural distortion. All of the lesions were pathologically verified. We evaluated the clinical and pathological findings and then assessed the clinical significance of the sonographic ally detected architectural distortions. Based on the clinical findings, one (5%) of the 20 patients had a palpable lump and the remaining 19 patients had no symptoms. No patient had a family history of breast cancer. Based on the pathological findings, three (15%) patients had malignancies. The malignant lesions included invasive ductal carcinomas (n = 2) and ductal carcinoma in situ (n = 1). Four (20%) patients had high-risk lesions: atypical ductal hyperplasia (n = 3) and lobular carcinoma in situ (n = 1). The remaining 13 (65%) patients had benign lesions, however, seven (35%) out of 13 patients had mild-risk lesions (three intraductal papillomas, three moderate or florid epithelial hyperplasia and one sclerosing adenosis). Of the sonographic ally detected architectural distortions, 35% were breast cancers or high-risk lesions and 35% were mild-risk lesions. Thus, a biopsy might be needed for an architectural distortion without an associated mass as depicted on breast ultrasound, even though the mammographic findings are normal

Sonographic ally Detected Architectural Distortion: Clinical Significance

International Nuclear Information System (INIS)

Kim, Shin Kee; Seo, Bo Kyoung; Yi, Ann; Cha, Sang Hoon; Kim, Baek Hyun; Cho, Kyu Ran; Kim, Young Sik; Son, Gil Soo; Kim, Young Soo; Kim, Hee Young

2008-01-01

Architectural distortion is a suspicious abnormality for the diagnosis of breast cancer. The aim of this study was to investigate the clinical significance of sonographic ally detected architectural distortion. From January 2006 to June 2008, 20 patients were identified who had sonographic ally detected architectural distortions without a history of trauma or surgery and abnormal mammographic findings related to an architectural distortion. All of the lesions were pathologically verified. We evaluated the clinical and pathological findings and then assessed the clinical significance of the sonographic ally detected architectural distortions. Based on the clinical findings, one (5%) of the 20 patients had a palpable lump and the remaining 19 patients had no symptoms. No patient had a family history of breast cancer. Based on the pathological findings, three (15%) patients had malignancies. The malignant lesions included invasive ductal carcinomas (n = 2) and ductal carcinoma in situ (n = 1). Four (20%) patients had high-risk lesions: atypical ductal hyperplasia (n = 3) and lobular carcinoma in situ (n = 1). The remaining 13 (65%) patients had benign lesions, however, seven (35%) out of 13 patients had mild-risk lesions (three intraductal papillomas, three moderate or florid epithelial hyperplasia and one sclerosing adenosis). Of the sonographic ally detected architectural distortions, 35% were breast cancers or high-risk lesions and 35% were mild-risk lesions. Thus, a biopsy might be needed for an architectural distortion without an associated mass as depicted on breast ultrasound, even though the mammographic findings are normal

Controls of multi-modal wave conditions in a complex coastal setting

Science.gov (United States)

Hegermiller, Christie; Rueda, Ana C.; Erikson, Li H.; Barnard, Patrick L.; Antolinez, J.A.A.; Mendez, Fernando J.

2017-01-01

Coastal hazards emerge from the combined effect of wave conditions and sea level anomalies associated with storms or low-frequency atmosphere-ocean oscillations. Rigorous characterization of wave climate is limited by the availability of spectral wave observations, the computational cost of dynamical simulations, and the ability to link wave-generating atmospheric patterns with coastal conditions. We present a hybrid statistical-dynamical approach to simulating nearshore wave climate in complex coastal settings, demonstrated in the Southern California Bight, where waves arriving from distant, disparate locations are refracted over complex bathymetry and shadowed by offshore islands. Contributions of wave families and large-scale atmospheric drivers to nearshore wave energy flux are analyzed. Results highlight the variability of influences controlling wave conditions along neighboring coastlines. The universal method demonstrated here can be applied to complex coastal settings worldwide, facilitating analysis of the effects of climate change on nearshore wave climate.

Integral leakage rate tests of containments

International Nuclear Information System (INIS)

Engel, M.; Siefart, E.; Walter, R.

1978-01-01

A method is presented for the integral leakage rate tests of containments. This method, used in conjunction with statistical methods, provides reliable information on the tightness of the containment. This method forms the basis of DIN 25436/KTA 3405. (orig.) [de

The process of care in integrative health care settings - a qualitative study of US practices.

Science.gov (United States)

Grant, Suzanne J; Bensoussan, Alan

2014-10-23

There is a lack of research on the organisational operations of integrative healthcare (IHC) practices. IHC is a therapeutic strategy integrating conventional and complementary medicine in a shared context to administer individualized treatment. To better understand the process of care in IHC - the way in which patients are triaged and treatment plans are constructed, interviews were conducted with integrative health care leaders and practitioners in the US. Semi-structured interviews were conducted with a pragmatic group of fourteen leaders and practitioners from nine different IHC settings. All interviews were conducted face-to-face with the exception of one phone interview. Questions focussed on understanding the "process of care" in an integrative healthcare setting. Deductive categories were formed from the aims of the study, focusing on: organisational structure, processes of care (subcategories: patient intake, treatment and charting, use of guidelines or protocols), prevalent diseases or conditions treated, and the role of research in the organisation. The similarities and differences of the ITH entities emerged from this process. On an organisational level, conventional and CM services and therapies were co-located in all nine settings. For patients, this means there is more opportunity for 'seamless care'. Shared information systems enabled easy communication using internal messaging or email systems, and shared patient intake information. But beyond this infrastructure alignment for integrative health care was less supported. There were no use of protocols or guidelines within any centre, no patient monitoring mechanism beyond that which occurred within one-on-one appointments. Joint planning for a patient treatment was typically ad hoc through informal mechanisms. Additional duties typically come at a direct financial cost to fee-for-service practitioners. In contrast, service delivery and the process of care within hospital inpatient services followed

Centi-pixel accurate real-time inverse distortion correction

CSIR Research Space (South Africa)

De Villiers, Johan P

2008-11-01

Full Text Available Inverse distortion is used to create an undistorted image from a distorted image. For each pixel in the undistorted image it is required to determine which pixel in the distorted image should be used. However the process of characterizing a lens...

Integrated complex care coordination for children with medical complexity: A mixed-methods evaluation of tertiary care-community collaboration

Directory of Open Access Journals (Sweden)

Cohen Eyal

2012-10-01

Full Text Available Abstract Background Primary care medical homes may improve health outcomes for children with special healthcare needs (CSHCN, by improving care coordination. However, community-based primary care practices may be challenged to deliver comprehensive care coordination to complex subsets of CSHCN such as children with medical complexity (CMC. Linking a tertiary care center with the community may achieve cost effective and high quality care for CMC. The objective of this study was to evaluate the outcomes of community-based complex care clinics integrated with a tertiary care center. Methods A before- and after-intervention study design with mixed (quantitative/qualitative methods was utilized. Clinics at two community hospitals distant from tertiary care were staffed by local community pediatricians with the tertiary care center nurse practitioner and linked with primary care providers. Eighty-one children with underlying chronic conditions, fragility, requirement for high intensity care and/or technology assistance, and involvement of multiple providers participated. Main outcome measures included health care utilization and expenditures, parent reports of parent- and child-quality of life [QOL (SF-36®, CPCHILD©, PedsQL™], and family-centered care (MPOC-20®. Comparisons were made in equal (up to 1 year pre- and post-periods supplemented by qualitative perspectives of families and pediatricians. Results Total health care system costs decreased from median (IQR $244 (981 per patient per month (PPPM pre-enrolment to $131 (355 PPPM post-enrolment (p=.007, driven primarily by fewer inpatient days in the tertiary care center (p=.006. Parents reported decreased out of pocket expenses (p© domains [Health Standardization Section (p=.04; Comfort and Emotions (p=.03], while total CPCHILD© score decreased between baseline and 1 year (p=.003. Parents and providers reported the ability to receive care close to home as a key benefit. Conclusions Complex

A comparison of graph- and kernel-based -omics data integration algorithms for classifying complex traits.

Science.gov (United States)

Yan, Kang K; Zhao, Hongyu; Pang, Herbert

2017-12-06

High-throughput sequencing data are widely collected and analyzed in the study of complex diseases in quest of improving human health. Well-studied algorithms mostly deal with single data source, and cannot fully utilize the potential of these multi-omics data sources. In order to provide a holistic understanding of human health and diseases, it is necessary to integrate multiple data sources. Several algorithms have been proposed so far, however, a comprehensive comparison of data integration algorithms for classification of binary traits is currently lacking. In this paper, we focus on two common classes of integration algorithms, graph-based that depict relationships with subjects denoted by nodes and relationships denoted by edges, and kernel-based that can generate a classifier in feature space. Our paper provides a comprehensive comparison of their performance in terms of various measurements of classification accuracy and computation time. Seven different integration algorithms, including graph-based semi-supervised learning, graph sharpening integration, composite association network, Bayesian network, semi-definite programming-support vector machine (SDP-SVM), relevance vector machine (RVM) and Ada-boost relevance vector machine are compared and evaluated with hypertension and two cancer data sets in our study. In general, kernel-based algorithms create more complex models and require longer computation time, but they tend to perform better than graph-based algorithms. The performance of graph-based algorithms has the advantage of being faster computationally. The empirical results demonstrate that composite association network, relevance vector machine, and Ada-boost RVM are the better performers. We provide recommendations on how to choose an appropriate algorithm for integrating data from multiple sources.

The TIGRESS Integrated Plunger ancillary systems for electromagnetic transition rate studies at TRIUMF

International Nuclear Information System (INIS)

Voss, P.; Henderson, R.; Andreoiu, C.; Ashley, R.; Austin, R.A.E.; Ball, G.C.; Bender, P.C.; Bey, A.; Cheeseman, A.; Chester, A.; Cross, D.S.; Drake, T.E.; Garnsworthy, A.B.; Hackman, G.; Holland, R.; Ketelhut, S.; Kowalski, P.; Krücken, R.; Laffoley, A.T.; Leach, K.G.

2014-01-01

The TIGRESS Integrated Plunger device is a new experimental tool for nuclear structure investigations via gamma-ray spectroscopy with post-accelerated beams from the ISAC-II facility at TRIUMF. Several ancillary detection systems integral to the device's capabilities for charged-particle tagging and light-ion identification following a variety of nuclear reaction mechanisms have been constructed and characterized. In particular, a silicon PIN diode wall, an annular silicon segmented detector, and a CsI(Tl) scintillator wall have together enabled particle-gamma correlations for reaction channel selectivity and precision kinematic reconstruction in recent measurements. We highlight the construction, characteristics, and implementation of the device's ancillary detectors as they enable a rich set of electromagnetic transition rate measurements via Doppler-shift lifetime techniques and low-energy Coulomb excitation

Proposal for a Simplified Management of Accelerator Settings in the Injector Complex Based on Automatic Setting Propagation

CERN Document Server

Damerau, Heiko

2018-01-01

With the increasing number of beams with different characteristics the number of controls settings to pilot the accelerator hardware has grown proportionally. In addition new hardware often comes with more possibilities to configure its behaviour, also requiring more parameters to be set. Both factors have lead to a significant growth of the number of set values to control the accelerators in the injector complex. To keep track of this myriad of settings, an automatic setting propagation mechanism is suggested. It allows to group cycles in families which partly share the same settings. This is in particular efficient for cycles where most of the settings must be identical, which is the case for many beams, e.g., in the PS.

SU-E-J-209: Geometric Distortion at 3T in a Commercial 4D MRI-Compatible Phantom

International Nuclear Information System (INIS)

Fatemi-Ardekani, A; Wronski, M; Kim, A; Stanisz, G; Sarfehnia, A; Keller, B

2015-01-01

Purpose: There are very few commercial 4D phantoms that are marketed as MRI compatible. We are evaluating one such commercial phantom, made to be used with an MRI-Linear accelerator. The focus of this work is to characterize the geometric distortions produced in this phantom at 3T using 3 clinical MR pulse sequences. Methods: The CIRS MRI-Linac Dynamic Phantom (CIRSTM) under investigation in this study consists of a softwaredriven moving tumour volume within a thorax phantom body and enables dose accumulation by placing a dosimeter within the tumour volume. Our initial investigation is to evaluate the phantom in static mode prior to examining its 4D capability. The water-filled thorax phantom was scanned using a wide-bore Philips 3T Achieva MRI scanner employing a Thoracic xl coil and clinical 2D T1W FFE, 2D T1W TSE and 3D T1W TFE pulse sequences. Each of the MR image sets was rigidly fused with a reference CT image of the phantom employing a rigid registration with 6 degrees of freedom. Geometric distortions between the MR and CT image sets were measured in 3 dimensions at selected points along the periphery of the distortion grid embedded within the phantom body (11.5, 7.5 and 3 cm laterally, ant/post and sup/inf of magnetic isocenter respectively). Results: The maximal measured geometric distortions between the MR and reference CT points of interest were 0.9, 1.8 and 1.3 mm in the lateral, anteriorposterior and cranio-caudal directions, respectively. For all 3 spatial dimensions, the maximal distortions occurred for the FFE pulse sequence. Maximal distortions for the 2D FFE, 2D TSE and 3D TFE sequences were 1, 0.7 and 1.8 mm, respectively. Conclusion: Our initial static investigation of this phantom shows minimal geometric distortions at 3T along the periphery of the embedded grid. CIRS has provided us with a phantom at no charge for evaluation at 3 Tesla

Performance Analysis of Video Transmission Using Sequential Distortion Minimization Method for Digital Video Broadcasting Terrestrial

Directory of Open Access Journals (Sweden)

Novita Astin

2016-12-01

Full Text Available This paper presents about the transmission of Digital Video Broadcasting system with streaming video resolution 640x480 on different IQ rate and modulation. In the video transmission, distortion often occurs, so the received video has bad quality. Key frames selection algorithm is flexibel on a change of video, but on these methods, the temporal information of a video sequence is omitted. To minimize distortion between the original video and received video, we aimed at adding methodology using sequential distortion minimization algorithm. Its aim was to create a new video, better than original video without significant loss of content between the original video and received video, fixed sequentially. The reliability of video transmission was observed based on a constellation diagram, with the best result on IQ rate 2 Mhz and modulation 8 QAM. The best video transmission was also investigated using SEDIM (Sequential Distortion Minimization Method and without SEDIM. The experimental result showed that the PSNR (Peak Signal to Noise Ratio average of video transmission using SEDIM was an increase from 19,855 dB to 48,386 dB and SSIM (Structural Similarity average increase 10,49%. The experimental results and comparison of proposed method obtained a good performance. USRP board was used as RF front-end on 2,2 GHz.

Brazilian exchange rate complexity: Financial crisis effects

Science.gov (United States)

Piqueira, José Roberto C.; Mortoza, Letícia Pelluci D.

2012-04-01

With the financial market globalization, foreign investments became vital for the economies, mainly in emerging countries. In the last decades, Brazilian exchange rates appeared as a good indicator to measure either investors' confidence or risk aversion. Here, some events of global or national financial crisis are analyzed, trying to understand how they influenced the "dollar-real" rate evolution. The theoretical tool to be used is the López-Mancini-Calbet (LMC) complexity measure that, applied to real exchange rate data, has shown good fitness between critical events and measured patterns.

Taking the Universe's Temperature with Spectral Distortions of the Cosmic Microwave Background.

Science.gov (United States)

Hill, J Colin; Battaglia, Nick; Chluba, Jens; Ferraro, Simone; Schaan, Emmanuel; Spergel, David N

2015-12-31

The cosmic microwave background (CMB) energy spectrum is a near-perfect blackbody. The standard model of cosmology predicts small spectral distortions to this form, but no such distortion of the sky-averaged CMB spectrum has yet been measured. We calculate the largest expected distortion, which arises from the inverse Compton scattering of CMB photons off hot, free electrons, known as the thermal Sunyaev-Zel'dovich (TSZ) effect. We show that the predicted signal is roughly one order of magnitude below the current bound from the COBE-FIRAS experiment, but it can be detected at enormous significance (≳1000σ) by the proposed Primordial Inflation Explorer (PIXIE). Although cosmic variance reduces the effective signal-to-noise ratio to 230σ, this measurement will still yield a subpercent constraint on the total thermal energy of electrons in the observable Universe. Furthermore, we show that PIXIE can detect subtle relativistic effects in the sky-averaged TSZ signal at 30σ, which directly probe moments of the optical depth-weighted intracluster medium electron temperature distribution. These effects break the degeneracy between the electron density and the temperature in the mean TSZ signal, allowing a direct inference of the mean baryon density at low redshift. Future spectral distortion probes will thus determine the global thermodynamic properties of ionized gas in the Universe with unprecedented precision. These measurements will impose a fundamental "integral constraint" on models of galaxy formation and the injection of feedback energy over cosmic time.

FSD: Frequency Space Differential measurement of CMB spectral distortions

Science.gov (United States)

Mukherjee, Suvodip; Silk, Joseph; Wandelt, Benjamin D.

2018-04-01

Although the Cosmic Microwave Background agrees with a perfect blackbody spectrum within the current experimental limits, it is expected to exhibit certain spectral distortions with known spectral properties. We propose a new method, Frequency Space Differential (FSD) to measure the spectral distortions in the CMB spectrum by using the inter-frequency differences of the brightness temperature. The difference between the observed CMB temperature at different frequencies must agree with the frequency derivative of the blackbody spectrum, in the absence of any distortion. However, in the presence of spectral distortions, the measured inter-frequency differences would also exhibit deviations from blackbody which can be modeled for known sources of spectral distortions like y & μ. Our technique uses FSD information for the CMB blackbody, y, μ or any other sources of spectral distortions to model the observed signal. Successful application of this method in future CMB missions can provide an alternative method to extract spectral distortion signals and can potentially make it feasible to measure spectral distortions without an internal blackbody calibrator.

Optical technique to measure distortion on heat treated parts

Science.gov (United States)

Sciammarella, Federico Mariano

The use of aluminum for structural applications grows with the continual improvement of their physical properties. Through the various amounts of heat treatments that are available, aluminum can vary in properties for all different types of applications. The automotive industry has benefited the most from the use of aluminum and they continue to seek more uses. The heat treatments of these parts are very vital in providing the properties needed for their particular applications. Moreover understanding the effects of heat treatments that may cause distortion to a part is critical. Most of the work carried out in this field is a pre and post measurement after part has experienced its treatment. In this study, we carry out in-situ measurements of the distortions that a heat-treated part undergoes when subjected to temperatures near melting followed by a slow cooling. In order to confirm the experimental measurements we used HOTPOINT to simulate the experiment and compare results. This study will provide much needed insight to the complex occurrences that aluminum parts undergo during heat treatment.

The Integrated Complex of Marketing of Higher Education Services

Directory of Open Access Journals (Sweden)

Zhehus Olena V.

2017-10-01

Full Text Available The article, on the basis of generalization of scientific views of foreign and domestic scientists, substantiates the integrated model of marketing of higher education products and services with consideration of their specificities. The obtained result is the «5Р + S» model, which includes the newly introduced poli-element «proposition», combining the interrelated and indivisible elements of «product», «people» and «process», as well as the traditional elements of the service marketing complex: «price», «place», «promotion», «physical evidence». The «social-marketing» element has been added to the integrated model on the basis of the high societal importance of educational services. Altogether, the proposed integrated model of the complex of marketing of higher education products and services is a symbiosis of commercial and non-commercial marketing, which will enhance social and economic efficiency of functioning of higher educational institution.

Reducing market distortions by setting harmonized standards for decommissioning and waste management funds in Europe

International Nuclear Information System (INIS)

Irrek, W.

2002-01-01

There are significant differences in the operation and accessibility of decommissioning and waste management funds in Europe. The diverging standards for these funds cause substantial market distortions and discrimination between competing electricity producers. Although there are different views regarding the question, if provisions for decommissioning and final waste disposal constitute prohibited state aid within the meaning of Article 87 (1) EC Treaty, and although the decommissioning and waste management funds is not a new issue, the liberalisation process across the EU means that this issue is one which must be addressed quickly by EU and national policy. (author)

An integrated view of complex landscapes: a big data-model integration approach to trans-disciplinary science

Science.gov (United States)

The Earth is a complex system comprised of many interacting spatial and temporal scales. Understanding, predicting, and managing for these dynamics requires a trans-disciplinary integrated approach. Although there have been calls for this integration, a general approach is needed. We developed a Tra...

Time-Varying Distortions of Binaural Information by Bilateral Hearing Aids

Science.gov (United States)

Rodriguez, Francisco A.; Portnuff, Cory D. F.; Goupell, Matthew J.; Tollin, Daniel J.

2016-01-01

In patients with bilateral hearing loss, the use of two hearing aids (HAs) offers the potential to restore the benefits of binaural hearing, including sound source localization and segregation. However, existing evidence suggests that bilateral HA users’ access to binaural information, namely interaural time and level differences (ITDs and ILDs), can be compromised by device processing. Our objective was to characterize the nature and magnitude of binaural distortions caused by modern digital behind-the-ear HAs using a variety of stimuli and HA program settings. Of particular interest was a common frequency-lowering algorithm known as nonlinear frequency compression, which has not previously been assessed for its effects on binaural information. A binaural beamforming algorithm was also assessed. Wide dynamic range compression was enabled in all programs. HAs were placed on a binaural manikin, and stimuli were presented from an arc of loudspeakers inside an anechoic chamber. Stimuli were broadband noise bursts, 10-Hz sinusoidally amplitude-modulated noise bursts, or consonant–vowel–consonant speech tokens. Binaural information was analyzed in terms of ITDs, ILDs, and interaural coherence, both for whole stimuli and in a time-varying sense (i.e., within a running temporal window) across four different frequency bands (1, 2, 4, and 6 kHz). Key findings were: (a) Nonlinear frequency compression caused distortions of high-frequency envelope ITDs and significantly reduced interaural coherence. (b) For modulated stimuli, all programs caused time-varying distortion of ILDs. (c) HAs altered the relationship between ITDs and ILDs, introducing large ITD–ILD conflicts in some cases. Potential perceptual consequences of measured distortions are discussed. PMID:27698258

Impact of loudspeaker nonlinear distortion on personal sound zones

DEFF Research Database (Denmark)

Ma, Xiaohui; J. Hegarty, Patrick; Abildgaard Pedersen, Jan

2018-01-01

Personal sound zone systems aim at creating multiple listening zones within a shared space with minimum interference between zones, but the performance is often poorer than simulations predict and effects of nonlinear distortion are sometimes audible. This paper assesses the impact of nonlinear...... distortion on sound zones through simulations and measurements performed under anechoic conditions. Two sound zones, one bright and one dark, are created with acoustic contrast control using two loudspeaker arrays driven at 250 Hz. Nonlinear distortion is modelled using second or third order nonlinearities....... Simulations show that nonlinear distortion degrades the acoustic contrast, which is confirmed by experimental measurements. The harmonic distortion is audible in the dark zone. Frequency resolved measurements reveal that harmonic distortion contributes to contrast loss, but nonlinear effects...

Tomosynthesis in the Diagnostic Setting: Changing Rates of BI-RADS Final Assessment over Time.

Science.gov (United States)

Raghu, Madhavi; Durand, Melissa A; Andrejeva, Liva; Goehler, Alexander; Michalski, Mark H; Geisel, Jaime L; Hooley, Regina J; Horvath, Laura J; Butler, Reni; Forman, Howard P; Philpotts, Liane E

2016-10-01

Purpose To evaluate the effect of tomosynthesis in diagnostic mammography on the Breast Imaging Reporting and Data System (BI-RADS) final assessment categories over time. Materials and Methods This retrospective study was approved by the institutional review board. The authors reviewed all diagnostic mammograms obtained during a 12-month interval before (two-dimensional [2D] mammography [June 2, 2010, to June 1, 2011]) and for 3 consecutive years after (tomosynthesis year 1 [2012], tomosynthesis year 2 [2013], and tomosynthesis year 3 [2014]) the implementation of tomosynthesis. The requirement to obtain informed consent was waived. The rates of BI-RADS final assessment categories 1-5 were compared between the 2D and tomosynthesis groups. The positive predictive values after biopsy (PPV3) for BI-RADS category 4 and 5 cases were compared. The mammographic features (masses, architectural distortions, calcifications, focal asymmetries) of lesions categorized as probably benign (BI-RADS category 3) and those for which biopsy was recommended (BI-RADS category 4 or 5) were reviewed. The χ(2) test was used to compare the rates of BI-RADS final assessment categories 1-5 between the two groups, and multivariate logistic regression analysis was performed to compare all diagnostic studies categorized as BI-RADS 3-5. Results There was an increase in the percentage of cases reported as negative or benign (BI-RADS category 1 or 2) with tomosynthesis (58.7% with 2D mammography vs 75.8% with tomosynthesis at year 3, P tomosynthesis at year 3, P tomosynthesis (8.0% with 2D mammography vs 7.8% with tomosynthesis at year 3, P = .2), there was a significant increase in the PPV3 (29.6% vs 50%, respectively; P tomosynthesis use. Conclusion Tomosynthesis in the diagnostic setting resulted in progressive shifts in the BI-RADS final assessment categories over time, with a significant increase in the proportion of studies classified as normal, a continued decrease in the rate of studies

In the digital era, architectural distortion remains a challenging radiological task

International Nuclear Information System (INIS)

Suleiman, W.I.; McEntee, M.F.; Lewis, S.J.; Rawashdeh, M.A.; Georgian-Smith, D.; Heard, R.; Tapia, K.; Brennan, P.C.

2016-01-01

Aim: To compare readers' performance in detecting architectural distortion (AD) compared with other breast cancer types using digital mammography. Materials and methods: Forty-one experienced breast screen readers (20 US and 21 Australian) were asked to read a single test set of 30 digitally acquired mammographic cases. Twenty cases had abnormal findings (10 with AD, 10 non-AD) and 10 cases were normal. Each reader was asked to locate and rate any abnormalities. Lesion and case-based performance was assessed. For each collection of readers (US; Australian; combined), jackknife free-response receiver operating characteristic (JAFROC), figure of merit (FOM), and inferred receiver operating characteristic (ROC), area under curve (Az) were calculated using JAFROC v.4.1 software. Readers' sensitivity, location sensitivity, JAFROC, FOM, ROC, Az scores were compared between cases groups using Wilcoxon's signed ranked test statistics. Results: For lesion-based analysis, significantly lower location sensitivity (p=0.001) was shown on AD cases compared with non-AD cases for all reader collections. The case-based analysis demonstrated significantly lower ROC Az values (p=0.02) for the first collection of readers, and lower sensitivity for the second collection of readers (p=0.04) and all-readers collection (p=0.008), for AD compared with non-AD cases. Conclusions: The current work demonstrates that AD remains a challenging task for readers, even in the digital era. - Highlights: • Architectural Distortion interpretation remains challenging for readers even with digital acquisition. • Significantly lower location sensitivity and sensitivity values for the AD were shown.

Decision making, cognitive distortions and emotional distress: A comparison between pathological gamblers and healthy controls.

Science.gov (United States)

Ciccarelli, Maria; Griffiths, Mark D; Nigro, Giovanna; Cosenza, Marina

2017-03-01

The etiology of problem gambling is multifaceted and complex. Among others factors, poor decision making, cognitive distortions (i.e., irrational beliefs about gambling), and emotional factors (e.g., negative mood states) appear to be among the most important factors in the development and maintenance of problem gambling. Although empirical evidence has suggested that cognitive distortions facilitate gambling and negative emotions are associated with gambling, the interplay between cognitive distortions, emotional states, and decision making in gambling remains unexplored. Pathological gamblers (N = 54) and healthy controls (N = 54) completed the South Oaks Gambling Screen (SOGS), the Iowa Gambling Task (IGT), the Gambling Related Cognitions Scale (GRCS), and the Depression Anxiety Stress Scale (DASS-21). Compared to healthy controls, pathological gamblers showed poorer decision making and reported higher scores on measures assessing cognitive distortions and emotional distress. All measures were positively associated with gambling severity. A significant negative correlation between decision making and cognitive distortions was also observed. No associations were found between poor decision making and emotional distress. Logistic regression analysis indicated that cognitive distortions, emotional distress, and poor decision making were significant predictors of problem gambling. The use of self-report measures and the absence of female participants limit the generalizability of the reported findings. The present study is the first to demonstrate the mutual influence between irrational beliefs and poor decision making, as well as the role of cognitive bias, emotional distress, and poor decision making in gambling disorder. Copyright © 2016 Elsevier Ltd. All rights reserved.

Probabilistic data integration and computational complexity

Science.gov (United States)

Hansen, T. M.; Cordua, K. S.; Mosegaard, K.

2016-12-01

Inverse problems in Earth Sciences typically refer to the problem of inferring information about properties of the Earth from observations of geophysical data (the result of nature's solution to the `forward' problem). This problem can be formulated more generally as a problem of `integration of information'. A probabilistic formulation of data integration is in principle simple: If all information available (from e.g. geology, geophysics, remote sensing, chemistry…) can be quantified probabilistically, then different algorithms exist that allow solving the data integration problem either through an analytical description of the combined probability function, or sampling the probability function. In practice however, probabilistic based data integration may not be easy to apply successfully. This may be related to the use of sampling methods, which are known to be computationally costly. But, another source of computational complexity is related to how the individual types of information are quantified. In one case a data integration problem is demonstrated where the goal is to determine the existence of buried channels in Denmark, based on multiple sources of geo-information. Due to one type of information being too informative (and hence conflicting), this leads to a difficult sampling problems with unrealistic uncertainty. Resolving this conflict prior to data integration, leads to an easy data integration problem, with no biases. In another case it is demonstrated how imperfections in the description of the geophysical forward model (related to solving the wave-equation) can lead to a difficult data integration problem, with severe bias in the results. If the modeling error is accounted for, the data integration problems becomes relatively easy, with no apparent biases. Both examples demonstrate that biased information can have a dramatic effect on the computational efficiency solving a data integration problem and lead to biased results, and under

Structural Change Accounting with Labor Market Distortions

OpenAIRE

Wenbiao Cai

2014-01-01

This paper quantifies the relative importance of sectoral productivity and labor market distortions for structural change. I use a model in which labor productivity is the product of TFP and human capital in each sector, but distortions generate wedges in wage per efficiency worker across sectors. I calculate human capital by sector using micro census data, and use the model to infer TFP and distortions such that it replicates structural change in the US, India, Mexico and Brazil between 1960...

Efficient MPEG-2 to H.264/AVC Transcoding of Intra-Coded Video

Directory of Open Access Journals (Sweden)

Vetro Anthony

2007-01-01

Full Text Available This paper presents an efficient transform-domain architecture and corresponding mode decision algorithms for transcoding intra-coded video from MPEG-2 to H.264/AVC. Low complexity is achieved in several ways. First, our architecture employs direct conversion of the transform coefficients, which eliminates the need for the inverse discrete cosine transform (DCT and forward H.264/AVC transform. Then, within this transform-domain architecture, we perform macroblock-based mode decisions based on H.264/AVC transform coefficients, which is possible using a novel method of calculating distortion in the transform domain. The proposed method for distortion calculation could be used to make rate-distortion optimized mode decisions with lower complexity. Compared to the pixel-domain architecture with rate-distortion optimized mode decision, simulation results show that there is a negligible loss in quality incurred by the direct conversion of transform coefficients and the proposed transform-domain mode decision algorithms, while complexity is significantly reduced. To further reduce the complexity, we also propose two fast mode decision algorithms. The first algorithm ranks modes based on a simple cost function in the transform domain, then computes the rate-distortion optimal mode from a reduced set of ranked modes. The second algorithm exploits temporal correlations in the mode decision between temporally adjacent frames. Simulation results show that these algorithms provide additional computational savings over the proposed transform-domain architecture while maintaining virtually the same coding efficiency.

Influence of initial state distortion in ion-atom collisions

Energy Technology Data Exchange (ETDEWEB)

Ciappina, M F [CONICET and Departamento de FIsica, Universidad Nacional del Sur, 8000 BahIa Blanca (Argentina); Cravero, W R [CONICET and Departamento de FIsica, Universidad Nacional del Sur, 8000 BahIa Blanca (Argentina); Garibotti, C R [CONICET and Division Colisiones Atomicas, Centro Atomico Bariloche, 8400 Bariloche (Argentina)

2004-05-28

We have studied the influence of initial state distortion in a single ionization by ion impact. We have taken a continuum distorted wave type distortion and by taking up to the first order in its asymptotic series expansion we build an eikonal-spherical distortion. In this way the influence of each term in the transition amplitude can be stated. This approximation can be considered an intermediate one between the eikonal initial state and the continuum distorted wave approaches for initial state distortion. We have computed doubly differential cross sections for helium ionization by protons and highly charged ions at high and intermediate impact energy. We have also discussed the contribution of the different terms in electron energy spectra, specially in the vicinity of ECC peak. Very good agreement is found with the available experimental data.

Influence of initial state distortion in ion-atom collisions

International Nuclear Information System (INIS)

Ciappina, M F; Cravero, W R; Garibotti, C R

2004-01-01

We have studied the influence of initial state distortion in a single ionization by ion impact. We have taken a continuum distorted wave type distortion and by taking up to the first order in its asymptotic series expansion we build an eikonal-spherical distortion. In this way the influence of each term in the transition amplitude can be stated. This approximation can be considered an intermediate one between the eikonal initial state and the continuum distorted wave approaches for initial state distortion. We have computed doubly differential cross sections for helium ionization by protons and highly charged ions at high and intermediate impact energy. We have also discussed the contribution of the different terms in electron energy spectra, specially in the vicinity of ECC peak. Very good agreement is found with the available experimental data

Identification and Management of Eating Disorders in Integrated Primary Care: Recommendations for Psychologists in Integrated Care Settings.

Science.gov (United States)

Buchholz, Laura J; King, Paul R; Wray, Laura O

2017-06-01

Eating disorders are associated with deleterious health consequences, increased risk of mortality, and psychosocial impairment. Although individuals with eating disorders are likely to seek treatment in general medical settings such as primary care (PC), these conditions are often under-detected by PC providers. However, psychologists in integrated PC settings are likely to see patients with eating disorders because of the mental health comorbidities associated with these conditions. Further, due to their training in identifying risk factors associated with eating disorders (i.e., comorbid mental health and medical disorders) and opportunities for collaboration with PC providers, psychologists are well-positioned to improve the detection and management of eating disorders in PC. This paper provides a brief overview of eating disorders and practical guidance for psychologists working in integrated PC settings to facilitate the identification and management of these conditions.

Modeling the Radio Foreground for Detection of CMB Spectral Distortions from the Cosmic Dawn and the Epoch of Reionization

Energy Technology Data Exchange (ETDEWEB)

Sathyanarayana Rao, Mayuri; Subrahmanyan, Ravi; Shankar, N Udaya [Raman Research Institute, C V Raman Avenue, Sadashivanagar, Bangalore 560080 (India); Chluba, Jens, E-mail: mayuris@rri.res.in [Jodrell Bank Centre for Astrophysics, University of Manchester, Oxford Road, M13 9PL (United Kingdom)

2017-05-01

Cosmic baryon evolution during the Cosmic Dawn and Reionization results in redshifted 21-cm spectral distortions in the cosmic microwave background (CMB). These encode information about the nature and timing of first sources over redshifts 30–6 and appear at meter wavelengths as a tiny CMB distortion along with the Galactic and extragalactic radio sky, which is orders of magnitude brighter. Therefore, detection requires precise methods to model foregrounds. We present a method of foreground fitting using maximally smooth (MS) functions. We demonstrate the usefulness of MS functions over traditionally used polynomials to separate foregrounds from the Epoch of Reionization (EoR) signal. We also examine the level of spectral complexity in plausible foregrounds using GMOSS, a physically motivated model of the radio sky, and find that they are indeed smooth and can be modeled by MS functions to levels sufficient to discern the vanilla model of the EoR signal. We show that MS functions are loss resistant and robustly preserve EoR signal strength and turning points in the residuals. Finally, we demonstrate that in using a well-calibrated spectral radiometer and modeling foregrounds with MS functions, the global EoR signal can be detected with a Bayesian approach with 90% confidence in 10 minutes’ integration.

Compressed sensing techniques for receiver based post-compensation of transmitter's nonlinear distortions in OFDM systems

KAUST Repository

Owodunni, Damilola S.

2014-04-01

In this paper, compressed sensing techniques are proposed to linearize commercial power amplifiers driven by orthogonal frequency division multiplexing signals. The nonlinear distortion is considered as a sparse phenomenon in the time-domain, and three compressed sensing based algorithms are presented to estimate and compensate for these distortions at the receiver using a few and, at times, even no frequency-domain free carriers (i.e. pilot carriers). The first technique is a conventional compressed sensing approach, while the second incorporates a priori information about the distortions to enhance the estimation. Finally, the third technique involves an iterative data-aided algorithm that does not require any pilot carriers and hence allows the system to work at maximum bandwidth efficiency. The performances of all the proposed techniques are evaluated on a commercial power amplifier and compared. The error vector magnitude and symbol error rate results show the ability of compressed sensing to compensate for the amplifier\\'s nonlinear distortions. © 2013 Elsevier B.V.

Density distortion within a rotating body

International Nuclear Information System (INIS)

Lanzano, P.

1975-01-01

This paper ascertains the distortion of the density distribution within a self-gravitating body in hydrostatic equilibrium under the influence of rotation. For this purpose, the Poisson equation has been solved by using the undistorted density profile within the Laplacian to obtain the distorted density. The Laplacian has been expressed in terms of a system of curvilinear coordinates for which the equipotential surfaces constitute a family of fundamental surfaces. In performing the requisite algebraic manipulations, the Clairaut and Radau equations developed in a previous paper (Lanzano,1974) were utilized to eliminate the derivatives of the elements pertaining to the equipotential surfaces. The density distortion has been obtained up to third-order terms in a small rotational parameter. (Auth.)

Cognitive Distortions in Depressed Women: Trait, or State Dependent?

Directory of Open Access Journals (Sweden)

Sedat BATMAZ

2015-12-01

Conclusion: The results have revealed that self-criticism, helplessness, hopelessness and preoccupation with danger related distortions had trait-like features, whereas self-blame related distortions were state dependent. This has clinical implications for the psychotherapeutic treatment of cognitive distortions in depression. Specifically, self-criticism related distortions should be managed during cognitive therapy for depression since the other subscales seem rather problematic. [JCBPR 2015; 4(3.000: 147-152

Reducing twin pregnancy rates after IVF--elective single embryo transfer (eSET).

LENUS (Irish Health Repository)

Milne, P

2010-01-01

Multiple pregnancy is a major complication of IVF and is associated with increased maternal, fetal and neonatal morbidity. Elective single embryo transfer (eSET) during IVF, rather than the more standard transfer of two embryos (double embryo transfer or DET), has been shown to significantly reduce the multiple pregnancy rate associated with IVF, while maintaining acceptable pregnancy rates. Couples undergoing IVF in 2008 who met good prognostic criteria had eSET performed. Pregnancy and twinning rates were compared with those for similar couples in 2007 who had DET. Couples unsuccessful with a fresh cycle of treatment had subsequent frozen embryo transfer cycles with DET. The cumulative pregnancy rate was similar for each group. However there were no multiple pregnancies in the eSET group, compared to 4 twins of 5 pregnancies in the DET group. 96% of eligible couples agreed to eSET. ESET is successful in and acceptable to good prognosis Irish couples undergoing IVF.

Kinetic intermediates en route to the final serpin-protease complex: studies of complexes of α1-protease inhibitor with trypsin.

Science.gov (United States)

Maddur, Ashoka A; Swanson, Richard; Izaguirre, Gonzalo; Gettins, Peter G W; Olson, Steven T

2013-11-01

Serpin protein protease inhibitors inactivate their target proteases through a unique mechanism in which a major serpin conformational change, resulting in a 70-Å translocation of the protease from its initial reactive center loop docking site to the opposite pole of the serpin, kinetically traps the acyl-intermediate complex. Although the initial Michaelis and final trapped acyl-intermediate complexes have been well characterized structurally, the intermediate stages involved in this remarkable transformation are not well understood. To better characterize such intermediate steps, we undertook rapid kinetic studies of the FRET and fluorescence perturbation changes of site-specific fluorophore-labeled derivatives of the serpin, α1-protease inhibitor (α1PI), which report the serpin and protease conformational changes involved in transforming the Michaelis complex to the trapped acyl-intermediate complex in reactions with trypsin. Two kinetically resolvable conformational changes were observed in the reactions, ascribable to (i) serpin reactive center loop insertion into sheet A with full protease translocation but incomplete protease distortion followed by, (ii) full conformational distortion and movement of the protease and coupled serpin conformational changes involving the F helix-sheet A interface. Kinetic studies of calcium effects on the labeled α1PI-trypsin reactions demonstrated both inactive and low activity states of the distorted protease in the final complex that were distinct from the intermediate distorted state. These studies provide new insights into the nature of the serpin and protease conformational changes involved in trapping the acyl-intermediate complex in serpin-protease reactions and support a previously proposed role for helix F in the trapping mechanism.

Integration and test plans for complex manufacturing systems

NARCIS (Netherlands)

Boumen, R.

2007-01-01

The integration and test phases that are part of the development and manufacturing of complex manufacturing systems are costly and time consuming. As time-to-market is becoming increasingly important, it is crucial to keep these phases as short as possible, whilemaintaining system quality. This is

Advanced Machining Toolpath for Low Distortion

Science.gov (United States)

2017-02-28

Advanced Machining Toolpath for Low Distortion FINAL STATUS REPORT Prepared by Brian Becker R&D Technology Manager Third Wave Systems, Inc... Machining Toolpath for Low Distortion December 2016 Contract No.: W911W6-16-P-0044 2 Table of Contents 1.0 EXECUTIVE SUMMARY...2 2.1 Task 1: Collect Details of Machining Lab to Support

Local distortion techniques and unitarity of the S-matrix for the 2-body problem

International Nuclear Information System (INIS)

Babbitt, D.; Balslev, E.

1976-01-01

The two-body S-matrix for an interaction with exponential decay at infinity is defined in a time-independent way and its unitarity is proved directly by local distortion techniques. Complete sets of incoming and outgoing states or delicate resolvent estimates are not needed for the proof

Relating Complexity and Error Rates of Ontology Concepts. More Complex NCIt Concepts Have More Errors.

Science.gov (United States)

Min, Hua; Zheng, Ling; Perl, Yehoshua; Halper, Michael; De Coronado, Sherri; Ochs, Christopher

2017-05-18

Ontologies are knowledge structures that lend support to many health-information systems. A study is carried out to assess the quality of ontological concepts based on a measure of their complexity. The results show a relation between complexity of concepts and error rates of concepts. A measure of lateral complexity defined as the number of exhibited role types is used to distinguish between more complex and simpler concepts. Using a framework called an area taxonomy, a kind of abstraction network that summarizes the structural organization of an ontology, concepts are divided into two groups along these lines. Various concepts from each group are then subjected to a two-phase QA analysis to uncover and verify errors and inconsistencies in their modeling. A hierarchy of the National Cancer Institute thesaurus (NCIt) is used as our test-bed. A hypothesis pertaining to the expected error rates of the complex and simple concepts is tested. Our study was done on the NCIt's Biological Process hierarchy. Various errors, including missing roles, incorrect role targets, and incorrectly assigned roles, were discovered and verified in the two phases of our QA analysis. The overall findings confirmed our hypothesis by showing a statistically significant difference between the amounts of errors exhibited by more laterally complex concepts vis-à-vis simpler concepts. QA is an essential part of any ontology's maintenance regimen. In this paper, we reported on the results of a QA study targeting two groups of ontology concepts distinguished by their level of complexity, defined in terms of the number of exhibited role types. The study was carried out on a major component of an important ontology, the NCIt. The findings suggest that more complex concepts tend to have a higher error rate than simpler concepts. These findings can be utilized to guide ongoing efforts in ontology QA.

Numerical Study of Electrostatic Field Distortion on LPTPC End-Plates based on Bulk Micromegas Modules

Directory of Open Access Journals (Sweden)

Bhattacharya Purba

2018-01-01

Full Text Available The R&D activities for the linear collider TPC (LC-TPC are currently working on the adoption of the micro pattern devices for the gaseous amplification stage. Several beam tests have been carried out at DESY with a 5 GeV electron beam in a 1 T superconducting magnet. We worked on a large prototype TPC with an end-plate that was built, for the first time, using seven resistive bulk Micromegas modules. During experiments, reduced signal sensitivity was observed at the boundary of these modules. Electrostatic field distortion near the module boundaries was considered to be the possible major reason behind these observations. In the present work, we will explore this hypothesis through numerical simulation. Our aim has been to understand the origin of distortions observed close to the edges of the test beam modules and to explore the possibility of using the Garfield simulation framework for investigating a phenomenon as complex as distortion.

Quantifying complexity in translational research: an integrated approach.

Science.gov (United States)

Munoz, David A; Nembhard, Harriet Black; Kraschnewski, Jennifer L

2014-01-01

The purpose of this paper is to quantify complexity in translational research. The impact of major operational steps and technical requirements is calculated with respect to their ability to accelerate moving new discoveries into clinical practice. A three-phase integrated quality function deployment (QFD) and analytic hierarchy process (AHP) method was used to quantify complexity in translational research. A case study in obesity was used to usability. Generally, the evidence generated was valuable for understanding various components in translational research. Particularly, the authors found that collaboration networks, multidisciplinary team capacity and community engagement are crucial for translating new discoveries into practice. As the method is mainly based on subjective opinion, some argue that the results may be biased. However, a consistency ratio is calculated and used as a guide to subjectivity. Alternatively, a larger sample may be incorporated to reduce bias. The integrated QFD-AHP framework provides evidence that could be helpful to generate agreement, develop guidelines, allocate resources wisely, identify benchmarks and enhance collaboration among similar projects. Current conceptual models in translational research provide little or no clue to assess complexity. The proposed method aimed to fill this gap. Additionally, the literature review includes various features that have not been explored in translational research.

Complexity of Configurators Relative to Integrations and Field of Application

DEFF Research Database (Denmark)

Kristjansdottir, Katrin; Shafiee, Sara; Battistello, Loris

. Moreover, configurators are commonly integrated to various IT systems within companies. The complexity of configurators is an important factor when it comes to performance, development and maintenance of the systems. A direct comparison of the complexity based on the different application...... integrations to other IT systems. The research method adopted in the paper is based on a survey followed with interviews where the unit of analysis is based on operating configurators within a company.......Configurators are applied widely to automate the specification processes at companies. The literature describes the industrial application of configurators supporting both sales and engineering processes, where configurators supporting the engineering processes are described more challenging...

Set-valued and fuzzy stochastic integral equations driven by semimartingales under Osgood condition

Directory of Open Access Journals (Sweden)

Malinowski Marek T.

2015-01-01

Full Text Available We analyze the set-valued stochastic integral equations driven by continuous semimartingales and prove the existence and uniqueness of solutions to such equations in the framework of the hyperspace of nonempty, bounded, convex and closed subsets of the Hilbert space L2 (consisting of square integrable random vectors. The coefficients of the equations are assumed to satisfy the Osgood type condition that is a generalization of the Lipschitz condition. Continuous dependence of solutions with respect to data of the equation is also presented. We consider equations driven by semimartingale Z and equations driven by processes A;M from decomposition of Z, where A is a process of finite variation and M is a local martingale. These equations are not equivalent. Finally, we show that the analysis of the set-valued stochastic integral equations can be extended to a case of fuzzy stochastic integral equations driven by semimartingales under Osgood type condition. To obtain our results we use the set-valued and fuzzy Maruyama type approximations and Bihari’s inequality.

Supply chain integration and performance : the moderating effect of supply complexity

NARCIS (Netherlands)

Giménez, C.; van der Vaart, T.; van Donk, D.P.

2012-01-01

Purpose - The purpose of this paper is to investigate the effectiveness of supply chain integration in different contexts. More specifically, it aims to show that supply chain integration is only effective in buyer-supplier relationships characterised by high supply complexity.

Reluctance to express emotion explains relation between cognitive distortions and social competence in anxious children.

Science.gov (United States)

Scott, Brandon G; Pina, Armando A; Parker, Julia H

2017-12-12

Guided by social information processing and affective social competence models, the focal objective of this research was to examine the relations among anxious children's cognitive distortions, social skill competence, and reluctance to express emotion. In addition, we explored whether children's attention control played any meaningful role. Using a sample of 111 anxious children (M age  = 9.63, SD = 0.73; 75.7% girls; 56% Hispanic/Latino), we found that cognitive distortions were negatively related to social competence. In addition, tests of moderated mediation showed that the negative association between cognitive distortions and social skill competence was indirect via reluctance to express emotion, but this only was the case for anxious children with high attention control and for distortions in the academic domain. The findings of this study may set the stage for new ways to conceptualize the role of higher attention control among anxious youth. Statement of contribution What is already known on this subject? Cognitive errors are prevalent in anxious youth Anxious children show socio-emotion deficits What does this study add? Cognitive errors are related to socio-emotion deficits in anxious youth Relations depend on attention control. © 2017 The British Psychological Society.

Assessment of integrated electrical resistivity data on complex aquifer structures in NE Nuba Mountains - Sudan

Science.gov (United States)

Mohamed, N. E.; Yaramanci, U.; Kheiralla, K. M.; Abdelgalil, M. Y.

2011-07-01

Two geophysical techniques were integrated to map the groundwater aquifers on complex geological settings, in the crystalline basement terrain in northeast Nuba Mountains. The water flow is structurally controlled by the northwest-southeast extensional faults as one of several in-situ deformational patterns that are attributed to the collision of the Pan-African oceanic assemblage of the Nubian shield against the pre-Pan African continental crust to the west. The structural lineaments and drainage systems have been enhanced by the remote sensing technique. The geophysical techniques used are: vertical electrical soundings (VES) and electrical resistivity tomography (ERT), in addition to hydraulic conductivity measurements. These measurements were designed to overlap in order to improve the producibility of the geophysical data and to provide a better interpretation of the hydrogeological setting of the aquifer complex structure. Smooth and Block inversion schemes were attempted for the observed ERT data to study their reliability in mapping the different geometries in the complex subsurface. The VES data was conducted where ERT survey was not accessible, and inverted smoothly and merged with the ERT in the 3D resistivity grid. The hydraulic conductivity was measured for 42 water samples collected from the distributed dug wells in the study area; where extremely high saline zones were recorded and have been compared to the resistivity values in the 3D model.

Bilateral Symmetry of Distortions of Tactile Size Perception.

Science.gov (United States)

Longo, Matthew R; Ghosh, Arko; Yahya, Tasneem

2015-01-01

The perceived distance between touches on the limbs is generally bigger for distances oriented across the width of the limb than for distances oriented along the length of the limb. The present study aimed to investigate the coherence of such distortions of tactile size perception across different skin surfaces. We investigated distortions of tactile size perception on the dorsal and palmar surfaces of both the left and right hands as well as the forehead. Participants judged which of two tactile distances felt larger. One distance was aligned with the proximodistal axis (along the body), the other with the mediolateral axis (across the body). Clear distortions were found on all five skin surfaces, with stimuli oriented across the width of the body being perceived as farther apart than those oriented along the length of the body. Consistent with previous results, distortions were smaller on the palmar than on the dorsal hand surface. Distortion on the forehead was intermediate between the dorsal and palmar surfaces. There were clear correlations between distortion on the left and right hands, for both the dorsal and palmar skin surfaces. In contrast, within each hand, there was no significant correlation between the two skin surfaces. Distortion on the forehead was not significantly correlated with that on any of the other skin surfaces. These results provide evidence for bilaterally symmetric representations underlying tactile size perception. © The Author(s) 2015.

Radiological error: analysis, standard setting, targeted instruction and teamworking

International Nuclear Information System (INIS)

FitzGerald, Richard

2005-01-01

Diagnostic radiology does not have objective benchmarks for acceptable levels of missed diagnoses [1]. Until now, data collection of radiological discrepancies has been very time consuming. The culture within the specialty did not encourage it. However, public concern about patient safety is increasing. There have been recent innovations in compiling radiological interpretive discrepancy rates which may facilitate radiological standard setting. However standard setting alone will not optimise radiologists' performance or patient safety. We must use these new techniques in radiological discrepancy detection to stimulate greater knowledge sharing, targeted instruction and teamworking among radiologists. Not all radiological discrepancies are errors. Radiological discrepancy programmes must not be abused as an instrument for discrediting individual radiologists. Discrepancy rates must not be distorted as a weapon in turf battles. Radiological errors may be due to many causes and are often multifactorial. A systems approach to radiological error is required. Meaningful analysis of radiological discrepancies and errors is challenging. Valid standard setting will take time. Meanwhile, we need to develop top-up training, mentoring and rehabilitation programmes. (orig.)

Drift of IBL LV current and its consequence in IBL distortion

CERN Document Server

The ATLAS collaboration

2015-01-01

The low voltage (LV) current of the IBL modules had been stable since the beginning of the Run2 until the middle of September 2015, but it has been unstable since then (Figure 1). A clear relation is observed between the current rise-up and the total radiation doze (TID) increase, which is considered to be the TID effect reported in . A shutdown of more than 29 hour on October 6 recovered the current largely (Figure 2). With the change of the LV current, the temperature of IBL modules also changes (Figure 3). The change of the thermo-mechanical condition of the IBL resulted in the change of the IBL distortion magnitude, and a clear relation between the module temperature and the distortion magnitude is observed (Figure 4). Through the duration presented in this series of plots, the cooling set temperature of the IBL was kept at -10℃.

Channel equalization techniques for non-volatile memristor memories

KAUST Repository

Naous, Rawan

2016-03-16

Channel coding and information theoretic approaches have been utilized in conventional non-volatile memories to overcome their inherent design limitations of leakage, coupling and refresh rates. However, the continuous scaling and integration constraints set on the current devices directed the attention towards emerging memory technologies as suitable alternatives. Memristive devices are prominent candidates to replace the conventional electronics due to its non-volatility and small feature size. Nonetheless, memristor-based memories still encounter an accuracy limitation throughout the read operation addressed as the sneak path phenomenon. The readout data is corrupted with added distortion that increases significantly the bit error rate and jeopardizes the reliability of the read operation. A novel technique is applied to alleviate this distorting effect where the communication channel model is proposed for the memory array. Noise cancellation principles are applied with the aid of preset pilots to extract channel information and adjust the readout values accordingly. The proposed technique has the virtue of high speed, energy efficiency, and low complexity design while achieving high reliability and error-free decoding.

Channel equalization techniques for non-volatile memristor memories

KAUST Repository

Naous, Rawan; Zidan, Mohammed A.; Salem, Ahmed Sultan; Salama, Khaled N.

2016-01-01

Channel coding and information theoretic approaches have been utilized in conventional non-volatile memories to overcome their inherent design limitations of leakage, coupling and refresh rates. However, the continuous scaling and integration constraints set on the current devices directed the attention towards emerging memory technologies as suitable alternatives. Memristive devices are prominent candidates to replace the conventional electronics due to its non-volatility and small feature size. Nonetheless, memristor-based memories still encounter an accuracy limitation throughout the read operation addressed as the sneak path phenomenon. The readout data is corrupted with added distortion that increases significantly the bit error rate and jeopardizes the reliability of the read operation. A novel technique is applied to alleviate this distorting effect where the communication channel model is proposed for the memory array. Noise cancellation principles are applied with the aid of preset pilots to extract channel information and adjust the readout values accordingly. The proposed technique has the virtue of high speed, energy efficiency, and low complexity design while achieving high reliability and error-free decoding.

Improved Life of Die Casting Dies of H13 Steel by Attaining Improved Mechanical Properties and Distortion Control During Heat Treatment

Energy Technology Data Exchange (ETDEWEB)

J. F. Wallace; D. Schwam

1998-10-01

The ultimate goal of this project is to increase die casting die life by using fast enough quenching rates to obtain good toughness and fatigue resistance in premium grade H-13 steel dies. The main tasks of the project were to compile a database on physical and mechanical properties of H-13; conduct gas quenching experiments to determine cooling rates of dies in difference vacuum furnaces; measure the as-quenched distortion of dies and the residual stresses; generate finite element analysis models to predict cooling rates, distortion, and residual stress of gas quenched dies; and establish rules and create PC-based expert system for prediction of cooling rates, distortion, and residual stress in vacuum/gas quenched H-13 dies. Cooling curves during gas quenching of H-13 blocks and die shapes have been measured under a variety of gas pressure. Dimensional changes caused by the gas quenching processes have been determined by accurate mapping of all surfaces with coordinate measuring machines before and after the quench. Residual stresses were determined by the ASTM E837 hole-drilling strain gage method. To facilitate the computer modeling work, a comprehensive database of H-13 mechanical and physical properties has been compiled. Finite element analysis of the heat treated shapes has been conducted using the TRAST/ABAQUS codes. There is a good fit between the predicted and measured distortion contours. However, the magnitude of the predicted distortion and residual stresses does not match well the measured values. Further fine tuning of the model is required before it can be used to predict distortion and residual stress in a quantitative manner. This last step is a prerequisite to generating rules for a reliable expert system.

Institutional Complexity and Social Entrepreneurship: A Fuzzy-Set Approach

OpenAIRE

Munoz, PA; Kibler, E

2016-01-01

This study examines the local institutional complexity of social entrepreneurship. Building on a novel fuzzy-set analysis of 407 social entrepreneurs in the UK, the study identifies five configurations of local institutional forces that collectively explain the confidence of social entrepreneurs in successfully managing their business. The findings demonstrate that local authorities are a dominant condition; yet combinations of other complementary—more and less formalized—local institutions n...

Biochemical reconstitution and phylogenetic comparison of human SET1 family core complexes involved in histone methylation.

Science.gov (United States)

Shinsky, Stephen A; Monteith, Kelsey E; Viggiano, Susan; Cosgrove, Michael S

2015-03-06

Mixed lineage leukemia protein-1 (MLL1) is a member of the SET1 family of histone H3 lysine 4 (H3K4) methyltransferases that are required for metazoan development. MLL1 is the best characterized human SET1 family member, which includes MLL1-4 and SETd1A/B. MLL1 assembles with WDR5, RBBP5, ASH2L, DPY-30 (WRAD) to form the MLL1 core complex, which is required for H3K4 dimethylation and transcriptional activation. Because all SET1 family proteins interact with WRAD in vivo, it is hypothesized they are regulated by similar mechanisms. However, recent evidence suggests differences among family members that may reflect unique regulatory inputs in the cell. Missing is an understanding of the intrinsic enzymatic activities of different SET1 family complexes under standard conditions. In this investigation, we reconstituted each human SET1 family core complex and compared subunit assembly and enzymatic activities. We found that in the absence of WRAD, all but one SET domain catalyzes at least weak H3K4 monomethylation. In the presence of WRAD, all SET1 family members showed stimulated monomethyltransferase activity but differed in their di- and trimethylation activities. We found that these differences are correlated with evolutionary lineage, suggesting these enzyme complexes have evolved to accomplish unique tasks within metazoan genomes. To understand the structural basis for these differences, we employed a "phylogenetic scanning mutagenesis" assay and identified a cluster of amino acid substitutions that confer a WRAD-dependent gain-of-function dimethylation activity on complexes assembled with the MLL3 or Drosophila trithorax proteins. These results form the basis for understanding how WRAD differentially regulates SET1 family complexes in vivo. © 2015 by The American Society for Biochemistry and Molecular Biology, Inc.

On the Boundedness and Symmetry Properties of the Fractal Sets Generated from Alternated Complex Map

Directory of Open Access Journals (Sweden)

Da Wang

2016-01-01

Full Text Available A complex map can give rise to two kinds of fractal sets: the Julia sets and the parameters sets (or the connectivity loci which represent different connectivity properties of the corresponding Julia sets. In the significative results of (Int. J. Bifurc. Chaos, 2009, 19:2123–2129 and (Nonlinear. Dyn. 2013, 73:1155–1163, the authors presented the two kinds of fractal sets of a class of alternated complex map and left some visually observations to be proved about the boundedness and symmetry properties of these fractal sets. In this paper, we improve the previous results by giving the strictly mathematical proofs of the two properties. Some simulations that verify the theoretical proofs are also included.

Modulation of chromatin structure by the FACT histone chaperone complex regulates HIV-1 integration.

Science.gov (United States)

Matysiak, Julien; Lesbats, Paul; Mauro, Eric; Lapaillerie, Delphine; Dupuy, Jean-William; Lopez, Angelica P; Benleulmi, Mohamed Salah; Calmels, Christina; Andreola, Marie-Line; Ruff, Marc; Llano, Manuel; Delelis, Olivier; Lavigne, Marc; Parissi, Vincent

2017-07-28

Insertion of retroviral genome DNA occurs in the chromatin of the host cell. This step is modulated by chromatin structure as nucleosomes compaction was shown to prevent HIV-1 integration and chromatin remodeling has been reported to affect integration efficiency. LEDGF/p75-mediated targeting of the integration complex toward RNA polymerase II (polII) transcribed regions ensures optimal access to dynamic regions that are suitable for integration. Consequently, we have investigated the involvement of polII-associated factors in the regulation of HIV-1 integration. Using a pull down approach coupled with mass spectrometry, we have selected the FACT (FAcilitates Chromatin Transcription) complex as a new potential cofactor of HIV-1 integration. FACT is a histone chaperone complex associated with the polII transcription machinery and recently shown to bind LEDGF/p75. We report here that a tripartite complex can be formed between HIV-1 integrase, LEDGF/p75 and FACT in vitro and in cells. Biochemical analyzes show that FACT-dependent nucleosome disassembly promotes HIV-1 integration into chromatinized templates, and generates highly favored nucleosomal structures in vitro. This effect was found to be amplified by LEDGF/p75. Promotion of this FACT-mediated chromatin remodeling in cells both increases chromatin accessibility and stimulates HIV-1 infectivity and integration. Altogether, our data indicate that FACT regulates HIV-1 integration by inducing local nucleosomes dissociation that modulates the functional association between the incoming intasome and the targeted nucleosome.

Systems and methods for mirror mounting with minimized distortion

Science.gov (United States)

Antonille, Scott R. (Inventor); Wallace, Thomas E. (Inventor); Content, David A. (Inventor); Wake, Shane W. (Inventor)

2012-01-01

A method for mounting a mirror for use in a telescope includes attaching the mirror to a plurality of adjustable mounts; determining a distortion in the mirror caused by the plurality adjustable mounts, and, if the distortion is determined to be above a predetermined level: adjusting one or more of the adjustable mounts; and determining the distortion in the mirror caused by the adjustable mounts; and in the event the determined distortion is determined to be at or below the predetermined level, rigidizing the adjustable mounts.

Extending the NIF DISCO framework to automate complex workflow: coordinating the harvest and integration of data from diverse neuroscience information resources.

Science.gov (United States)

Marenco, Luis N; Wang, Rixin; Bandrowski, Anita E; Grethe, Jeffrey S; Shepherd, Gordon M; Miller, Perry L

2014-01-01

This paper describes how DISCO, the data aggregator that supports the Neuroscience Information Framework (NIF), has been extended to play a central role in automating the complex workflow required to support and coordinate the NIF's data integration capabilities. The NIF is an NIH Neuroscience Blueprint initiative designed to help researchers access the wealth of data related to the neurosciences available via the Internet. A central component is the NIF Federation, a searchable database that currently contains data from 231 data and information resources regularly harvested, updated, and warehoused in the DISCO system. In the past several years, DISCO has greatly extended its functionality and has evolved to play a central role in automating the complex, ongoing process of harvesting, validating, integrating, and displaying neuroscience data from a growing set of participating resources. This paper provides an overview of DISCO's current capabilities and discusses a number of the challenges and future directions related to the process of coordinating the integration of neuroscience data within the NIF Federation.

Choquet Integral of Fuzzy-Number-Valued Functions: The Differentiability of the Primitive with respect to Fuzzy Measures and Choquet Integral Equations

Directory of Open Access Journals (Sweden)

Zengtai Gong

2014-01-01

Full Text Available This paper deals with the Choquet integral of fuzzy-number-valued functions based on the nonnegative real line. We firstly give the definitions and the characterizations of the Choquet integrals of interval-valued functions and fuzzy-number-valued functions based on the nonadditive measure. Furthermore, the operational schemes of above several classes of integrals on a discrete set are investigated which enable us to calculate Choquet integrals in some applications. Secondly, we give a representation of the Choquet integral of a nonnegative, continuous, and increasing fuzzy-number-valued function with respect to a fuzzy measure. In addition, in order to solve Choquet integral equations of fuzzy-number-valued functions, a concept of the Laplace transformation for the fuzzy-number-valued functions in the sense of Choquet integral is introduced. For distorted Lebesgue measures, it is shown that Choquet integral equations of fuzzy-number-valued functions can be solved by the Laplace transformation. Finally, an example is given to illustrate the main results at the end of the paper.

Sources of optical distortion in rapidly grown crystals of KH2PO4

International Nuclear Information System (INIS)

De Yoreo, J.J.; Zaitseva, N.P.; Woods, B.W.; Land, T.A.; Rek, Z.U.

1995-01-01

We report results of x-ray topographic and optical measurements on KH 2 PO 4 crystals grown at rates of 5 to 30mm/day. We show that optical distortion in these crystals is caused primarily by 3 sources: dislocations, differences in composition between adjacent growth sectors of the crystal, and differences in composition between adjacent sectors of vicinal growth hillocks within a single growth sector of the crystal. We find that the compositional heterogeneities cause spatial variations in the refractive index and induced distortion of the transmitted wave front while large groups of dislocations are responsible for strain induced birefringence which leads to beam depolarization

Vertical integration, credit ratings and retail price settings in energy-only markets: Navigating the Resource Adequacy problem

International Nuclear Information System (INIS)

Simshauser, Paul

2010-01-01

Energy-only markets are prone to the Resource Adequacy problem, i.e. the timely entry of new plant. The reason for this is that competitive energy-only markets struggle to be remunerative given reliability constraints and market price caps. Historically, Australia's 45,000 MW National Electricity Market has managed to navigate this well understood problem, albeit with government entities directly or indirectly responsible for a surprisingly large 73% of all new plant investments to 2007. But government involvement in direct investment has now ceased. So what will enable the industry to navigate the Resource Adequacy problem into the future? Quite simply, industrial organisation, the presence of merchant utilities with investment-grade credit ratings and setting any regulated retail prices or 'price to beat' with an LRMC floor.

Modelling the Perceptual Components of Loudspeaker Distortion

DEFF Research Database (Denmark)

Olsen, Sune L.; Agerkvist, Finn T.; MacDonald, Ewen

2016-01-01

While non-linear distortion in loudspeakers decreases audio quality, the perceptual consequences can vary substantially. This paper investigates the metric Rnonlin [1] which was developed to predict subjective measurements of sound quality in nonlinear systems. The generalisability of the metric...... the perceptual consequences of non-linear distortion....

Enabling an Integrated Rate-temporal Learning Scheme on Memristor

Science.gov (United States)

He, Wei; Huang, Kejie; Ning, Ning; Ramanathan, Kiruthika; Li, Guoqi; Jiang, Yu; Sze, Jiayin; Shi, Luping; Zhao, Rong; Pei, Jing

2014-04-01

Learning scheme is the key to the utilization of spike-based computation and the emulation of neural/synaptic behaviors toward realization of cognition. The biological observations reveal an integrated spike time- and spike rate-dependent plasticity as a function of presynaptic firing frequency. However, this integrated rate-temporal learning scheme has not been realized on any nano devices. In this paper, such scheme is successfully demonstrated on a memristor. Great robustness against the spiking rate fluctuation is achieved by waveform engineering with the aid of good analog properties exhibited by the iron oxide-based memristor. The spike-time-dependence plasticity (STDP) occurs at moderate presynaptic firing frequencies and spike-rate-dependence plasticity (SRDP) dominates other regions. This demonstration provides a novel approach in neural coding implementation, which facilitates the development of bio-inspired computing systems.

Off-shell distortions of multichannel atomic processes

Science.gov (United States)

Barrachina, R. O.; Clauser, C. F.

2017-10-01

Any multichannel problem can be reduced to a succession of two-body events. However, these basic building blocks of many-body theories do not correspond to elastic processes but are off-the-energy-shell. In view of this difficulty, the great majority of the Distorted-Wave models includes a subsidiary approximation where these off-shell terms are arbitrarily forced to lie on the energy shell. At a first glance, since the energy deficiency is negligible for high enough velocities, the on-shell assumption seems to be completely justified. However, for the case of Coulomb interactions, the two-body off-shell distortions have branch-point singularities on the on-shell limit. In this article we demonstrate that these singularities might produce sizeable distortions of multiple scattering amplitudes, mainly when dealing with ion-ion collisions. Finally, we propose a method of including these distortions that might lead to better results that removing them completely.

Limit sets for the discrete spectrum of complex Jacobi matrices

International Nuclear Information System (INIS)

Golinskii, L B; Egorova, I E

2005-01-01

The discrete spectrum of complex Jacobi matrices that are compact perturbations of the discrete Laplacian is studied. The precise stabilization rate (in the sense of order) of the matrix elements ensuring the finiteness of the discrete spectrum is found. An example of a Jacobi matrix with discrete spectrum having a unique limit point is constructed. These results are discrete analogues of Pavlov's well-known results on Schroedinger operators with complex potential on a half-axis.

Simulation of Distortion and Residual Stress Development During Heat Treatment of Steel Castings

Energy Technology Data Exchange (ETDEWEB)

Beckermann, Christoph; Carlson, Kent

2011-07-22

of the Navy-C ring (a classical test shape for heat treatment experiments) for several carbon and low alloy steels in order to generate data necessary to validate the code. The predicted distortions were in reasonable agreement with the experimentally measured values. However, the final distortions in the castings were small, making it difficult to determine how accurate the predictions truly are. It is recommended that further validation of the software be performed with the aid of additional experiments with large production steel castings that experience significant heat treatment distortions. It is apparent from this research that the mechanical properties of the bonded sand used for cores and sand molds are key in producing accurate stress simulation results. Because of this, experiments were performed to determine the temperature-dependent elastic modulus of a resin-bonded sand commonly utilized in the steel casting industry. The elastic modulus was seen to vary significantly with heating and cooling rates. Also, the retained room temperature elastic modulus after heating was seen to degrade significantly when the sand was heated above 125°C. The elastic modulus curves developed in this work can readily be utilized in casting simulation software. Additional experiments with higher heating rates are recommended to determine the behavior of the elastic modulus in the sand close to the mold-metal interface. The commercial heat treatment residual stress and distortion code, once fully validated, is expected to result in an estimated energy savings of 2.15 trillion BTU's/year. Along with these energy savings, reduction of scrap and improvement in casting yield will result in a reduction of the environmental emissions associated with the melting and pouring of the metal which will be saved as a result of this technology.

On the structure and spin states of Fe(III)-EDDHA complexes.

Science.gov (United States)

Gómez-Gallego, Mar; Fernández, Israel; Pellico, Daniel; Gutiérrez, Angel; Sierra, Miguel A; Lucena, Juan J

2006-07-10

DFT methods are suitable for predicting both the geometries and spin states of EDDHA-Fe(III) complexes. Thus, extensive DFT computational studies have shown that the racemic-Fe(III) EDDHA complex is more stable than the meso isomer, regardless of the spin state of the central iron atom. A comparison of the energy values obtained for the complexes under study has also shown that high-spin (S = 5/2) complexes are more stable than low-spin (S = 1/2) ones. These computational results matched the experimental results of the magnetic susceptibility values of both isomers. In both cases, their behavior has been fitted as being due to isolated high-spin Fe(III) in a distorted octahedral environment. The study of the correlation diagram also confirms the high-spin iron in complex 2b. The geometry optimization of these complexes performed with the standard 3-21G* basis set for hydrogen, carbon, oxygen, and nitrogen and the Hay-Wadt small-core effective core potential (ECP) including a double-xi valence basis set for iron, followed by single-point energy refinement with the 6-31G* basis set, is suitable for predicting both the geometries and the spin-states of EDDHA-Fe(III) complexes. The presence of a high-spin iron in Fe(III)-EDDHA complexes could be the key to understanding their lack of reactivity in electron-transfer processes, either chemically or electrochemically induced, and their resistance to photodegradation.

Rotational and translational distortions of the crystal structure of the Sr2HrRuO6 (Hr = Ho, Dy, Gd, Eu) complex perovskites

International Nuclear Information System (INIS)

Triana, C.A.; Landínez Téllez, D.A.; Roa-Rojas, J.

2013-01-01

Sr 2 HrRuO 6 (Hr = Ho, Dy, Gd, Eu) complex perovskites were synthesized through the high-temperature solid-state reaction method, and their crystal structures were analyzed in detail as a function of the Hr-cation ionic radius. Results of powder XRD pattern measurement and Rietveld analysis of the experimental profiles show that the Sr 2 HrRuO 6 compounds crystallize in a monoclinic distorted perovskite-like structure, P2 1 /n (#14) space group, where the unit cell parameters are related to the primitive unit cell a p by a≈√(2)a p , b≈√(2)a p and c ≈ 2a p . The structures show an alternate distribution of the Ru 5+ (2d: 0.5, 0, 0) and Hr 3+ (2c: 0, 0.5, 0) making up RuO 6 and HrO 6 octahedra alternatively arranged in two interleaving fcc sublattices, where the O(1), O(2), and O(3) ions are localized at the corner of the octahedral, while the Sr 2+ is located at the A-site, occupying the cavities built by the corner-sharing octahedra with Wyckoff position 4e. Due to the existence of mismatched ionic sizes between the ionic radii of the Sr 2 HrRuO 6 compounds, the HrO 6 and RuO 6 octahedra are constrained to tilting around the [111] c , [001] c , and [110] c cubic directions so as to optimize the Sr–O inter-atomic bond lengths, tending to rotate the structure in order to fix the Ru 5+ and Hr 3+ ions on the M′ and M″ sites of the complex perovskites. The cell parameters a, b, and c, the inter-atomic bond angles, the inter-atomic bond lengths, and the tilting angles increase as the Hr-cation ionic radius increases. The mismatch that exists in the Sr 2 HrRuO 6 ionic radius produces a large distortion from the ideal cubic symmetry. The pure perovskite-like phase of Sr 2 HrRuO 6 is thermodynamically and kinetically stable at high temperatures above 1420 K, where it is entirely governed by the average size of the Hr 3+ and Ru 5+ cations. Highlights: ► Crystal structure of Sr 2 HrRuO 6 (Hr = Ho, Dy, Gd, Eu) as a function of Hr ionic radius. ► XRD

On the singular set of harmonic maps into DM-complexes

CERN Document Server

Daskalopoulos, Georgios

2016-01-01

The authors prove that the singular set of a harmonic map from a smooth Riemammian domain to a Riemannian DM-complex is of Hausdorff codimension at least two. They also explore monotonicity formulas and an order gap theorem for approximately harmonic maps. These regularity results have applications to rigidity problems examined in subsequent articles.

Scalar one-loop integrals for QCD

International Nuclear Information System (INIS)

Ellis, R. Keith; Zanderighi, Giulia

2008-01-01

We construct a basis set of infra-red and/or collinearly divergent scalar one-loop integrals and give analytic formulas, for tadpole, bubble, triangle and box integrals, regulating the divergences (ultra-violet, infra-red or collinear) by regularization in D = 4-2ε dimensions. For scalar triangle integrals we give results for our basis set containing 6 divergent integrals. For scalar box integrals we give results for our basis set containing 16 divergent integrals. We provide analytic results for the 5 divergent box integrals in the basis set which are missing in the literature. Building on the work of van Oldenborgh, a general, publicly available code has been constructed, which calculates both finite and divergent one-loop integrals. The code returns the coefficients of 1/ε 2 ,1/ε 1 and 1/ε 0 as complex numbers for an arbitrary tadpole, bubble, triangle or box integral

Magnetic anisotropy basis sets for epitaxial (110) and (111) REFe2 nanofilms

International Nuclear Information System (INIS)

Bowden, G J; Martin, K N; Fox, A; Rainford, B D; Groot, P A J de

2008-01-01

Magnetic anisotropy basis sets for the cubic Laves phase rare earth intermetallic REFe 2 compounds are discussed in some detail. Such compounds can be either free standing, or thin films grown in either (110) or (111) mode using molecular beam epitaxy. For the latter, it is useful to rotate to a new coordinate system where the z-axis coincides with the growth axes of the film. In this paper, three symmetry adapted basis sets are given, for multi-pole moments up to n = 12. These sets can be used for free-standing compounds and for (110) and (111) epitaxial films. In addition, the distortion of REFe 2 films, grown on sapphire substrates, is also considered. The distortions are different for the (110) and (111) films. Strain-induced harmonic sets are given for both specific and general distortions. Finally, some predictions are made concerning the preferred direction of easy magnetization in (111) molecular beam epitaxy grown REFe 2 films

Beyond y and μ: the shape of the CMB spectral distortions in the intermediate epoch, 1.5 × 104∼5

International Nuclear Information System (INIS)

Khatri, Rishi; Sunyaev, Rashid A.

2012-01-01

We calculate numerical solutions and analytic approximations for the intermediate-type spectral distortions. Detection of a μ-type distortion (saturated comptonization) in the CMB will constrain the time of energy injection to be at a redshift 2 × 10 6 ∼>z∼>2 × 10 5 , while a detection of a y-type distortion (minimal comptonization) will mean that there was heating of CMB at redshift z∼ 4 . We point out that the partially comptonized spectral distortions, generated in the redshift range 1.5 × 10 4 ∼ 5 , are much richer in information than the pure y and μ-type distortions. The spectrum created during this period is intermediate between y and μ-type distortions and depends sensitively on the redshift of energy injection. These intermediate-type distortions cannot be mimicked by a mixture of y and μ-type distortions at all frequencies and vice versa. The measurement of these intermediate-type CMB spectral distortions has the possibility to constrain precisely not only the amount of energy release in the early Universe but also the mechanism, for example, particle annihilation and Silk damping can be distinguished from particle decay. The intermediate-type distortion templates and software code using these templates to calculate the CMB spectral distortions for user-defined energy injection rate is made publicly available

Harmonic distortion in microwave photonic filters.

Science.gov (United States)

Rius, Manuel; Mora, José; Bolea, Mario; Capmany, José

2012-04-09

We present a theoretical and experimental analysis of nonlinear microwave photonic filters. Far from the conventional condition of low modulation index commonly used to neglect high-order terms, we have analyzed the harmonic distortion involved in microwave photonic structures with periodic and non-periodic frequency responses. We show that it is possible to design microwave photonic filters with reduced harmonic distortion and high linearity even under large signal operation.

Identifying and intervening with substance-using women exposed to intimate partner violence: phenomenology, comorbidities, and integrated approaches within primary care and other agency settings.

Science.gov (United States)

Weaver, Terri L; Gilbert, Louisa; El-Bassel, Nabila; Resnick, Heidi S; Noursi, Samia

2015-01-01

Substance use and/or disorders (SUDs) have been identified as a significant correlate of intimate partner violence (IPV) exposure and present complex issues that intersect with the topography of IPV, attendant mental health, and physical co-morbidities and may pose barriers to primary care- and other agency-based screening and intervention efforts. Despite substantial research indicating significantly higher rates of all types and severity of IPV victimization among women with SUDs and bidirectional associations between partner or self-use of drugs or alcohol and IPV victimization, effective screening, brief interventions, coordinated systems of care, and treatment approaches to address these co-occurring problems remain very limited. We integrated select research examining the intersection of IPV victimization and SUDs and several comorbidities that have significant public health impact and provided recommendations for scaling up targeted interventions to redress these co-occurring problems among women in primary, emergency, and other care settings.

CMB spectral distortions as solutions to the Boltzmann equations

Energy Technology Data Exchange (ETDEWEB)

Ota, Atsuhisa, E-mail: a.ota@th.phys.titech.ac.jp [Department of Physics, Tokyo Institute of Technology, Tokyo 152-8551 (Japan)

2017-01-01

We propose to re-interpret the cosmic microwave background spectral distortions as solutions to the Boltzmann equation. This approach makes it possible to solve the second order Boltzmann equation explicitly, with the spectral y distortion and the momentum independent second order temperature perturbation, while generation of μ distortion cannot be explained even at second order in this framework. We also extend our method to higher order Boltzmann equations systematically and find new type spectral distortions, assuming that the collision term is linear in the photon distribution functions, namely, in the Thomson scattering limit. As an example, we concretely construct solutions to the cubic order Boltzmann equation and show that the equations are closed with additional three parameters composed of a cubic order temperature perturbation and two cubic order spectral distortions. The linear Sunyaev-Zel'dovich effect whose momentum dependence is different from the usual y distortion is also discussed in the presence of the next leading order Kompaneets terms, and we show that higher order spectral distortions are also generated as a result of the diffusion process in a framework of higher order Boltzmann equations. The method may be applicable to a wider class of problems and has potential to give a general prescription to non-equilibrium physics.

Deep subcritical levels measurements dependents upon kinetic distortion factors

International Nuclear Information System (INIS)

Pan Shibiao; Li Xiang; Fu Guo'en; Huang Liyuan; Mu Keliang

2013-01-01

The measurement of deep subcritical levels, with the increase of subcriticality, showed that the results impact on the kinetic distortion effect, along with neutron flux strongly deteriorated. Using the diffusion theory, calculations have been carried out to quantify the kinetic distortion correction factors in subcritical systems, and these indicate that epithermal neutron distributions are strongly affected by kinetic distortion. Subcriticality measurements in four different rod-state combination at the zero power device was carried out. The test data analysis shows that, with increasing subcriticality, kinetic distortion effect correction factor gradually increases from 1.052 to 1.065, corresponding reactive correction amount of 0.78β eff ∼ 3.01β eff . Thus, it is necessary to consider the kinetic distortion effect in the deep subcritical reactivity measurements. (authors)

Compressed sensing based joint-compensation of power amplifier's distortions in OFDMA cognitive radio systems

KAUST Repository

Ali, Anum Z.

2013-12-01

Linearization of user equipment power amplifiers driven by orthogonal frequency division multiplexing signals is addressed in this paper. Particular attention is paid to the power efficient operation of an orthogonal frequency division multiple access cognitive radio system and realization of such a system using compressed sensing. Specifically, precompensated overdriven amplifiers are employed at the mobile terminal. Over-driven amplifiers result in in-band distortions and out of band interference. Out of band interference mostly occupies the spectrum of inactive users, whereas the in-band distortions are mitigated using compressed sensing at the receiver. It is also shown that the performance of the proposed scheme can be further enhanced using multiple measurements of the distortion signal in single-input multi-output systems. Numerical results verify the ability of the proposed setup to improve error vector magnitude, bit error rate, outage capacity and mean squared error. © 2011 IEEE.

Compressed sensing based joint-compensation of power amplifier's distortions in OFDMA cognitive radio systems

KAUST Repository

Ali, Anum Z.; Hammi, Oualid; Al-Naffouri, Tareq Y.

2013-01-01

Linearization of user equipment power amplifiers driven by orthogonal frequency division multiplexing signals is addressed in this paper. Particular attention is paid to the power efficient operation of an orthogonal frequency division multiple access cognitive radio system and realization of such a system using compressed sensing. Specifically, precompensated overdriven amplifiers are employed at the mobile terminal. Over-driven amplifiers result in in-band distortions and out of band interference. Out of band interference mostly occupies the spectrum of inactive users, whereas the in-band distortions are mitigated using compressed sensing at the receiver. It is also shown that the performance of the proposed scheme can be further enhanced using multiple measurements of the distortion signal in single-input multi-output systems. Numerical results verify the ability of the proposed setup to improve error vector magnitude, bit error rate, outage capacity and mean squared error. © 2011 IEEE.

Qualitative modelling for the Caeté Mangrove Estuary (North Brazil): a preliminary approach to an integrated eco-social analysis

Science.gov (United States)

Ortiz, Marco; Wolff, Matthias

2004-10-01

The sustainability of different integrated management regimes for the mangrove ecosystem of the Caeté Estuary (North Brazil) were assessed using a holistic theoretical framework. As a way to demonstrate that the behaviour and trajectory of complex whole systems are not epiphenomenal to the properties of the small parts, a set of conceptual models from more reductionistic to more holistic were enunciated. These models integrate the scientific information published until present for this mangrove ecosystem. The sustainability of different management scenarios (forestry and fishery) was assessed. Since the exploitation of mangrove trees is not allowed according Brazilian laws, the forestry was only included for simulation purposes. The model simulations revealed that sustainability predictions of reductionistic models should not be extrapolated into holistic approaches. Forestry and fishery activities seem to be sustainable only if they are self-damped. The exploitation of the two mangrove species Rhizophora mangle and Avicenia germinans does not appear to be sustainable, thus a rotation harvest is recommended. A similar conclusion holds for the exploitation of invertebrate species. Our results suggest that more studies should be focused on the estimation of maximum sustainable yield based on a multispecies approach. Any reference to holistic sustainability based on reductionistic approaches may distort our understanding of the natural complex ecosystems.

Integrated Monetary and Exchange Rate Frameworks

NARCIS (Netherlands)

L. Vinhas de Souza

2002-01-01

textabstractHere the author empirically estimates if the different monetary and exchange rate frameworks observed in the Accession Countries of Central and Eastern Europe and the Baltics do yield different outcomes in terms of level and variance of a set of nominal and real variables. The author

Lattice shear distortions in fluorite structure oxides

International Nuclear Information System (INIS)

Faber, J. Jr.; Mueller, M.H.; Hitterman, R.L.

1979-01-01

Crystallographic shear distortions have been observed in fluorite structure, single crystals of UO 2 and Zr(Ca)O 2 /sub-x/ by neutron-diffraction techniques. These distortions localize on the oxygen sublattice and do not require the presence of an external strain. The internal rearrangement mode in UO 2 is a transverse, zone boundary q vector = 2π/a (0.5, 0.0) deformation with amplitude 0.014 A. In Zr(Ca)O/sub 2-x/, the mode is a longitudinal, q vector = 2-/a (0,0,0.5) deformation with amplitude 0.23 A. Cation-anion elastic interactions dominate in selecting the nature of the internal distortion

A Perceptual Model for Sinusoidal Audio Coding Based on Spectral Integration

Directory of Open Access Journals (Sweden)

Jensen Søren Holdt

2005-01-01

Full Text Available Psychoacoustical models have been used extensively within audio coding applications over the past decades. Recently, parametric coding techniques have been applied to general audio and this has created the need for a psychoacoustical model that is specifically suited for sinusoidal modelling of audio signals. In this paper, we present a new perceptual model that predicts masked thresholds for sinusoidal distortions. The model relies on signal detection theory and incorporates more recent insights about spectral and temporal integration in auditory masking. As a consequence, the model is able to predict the distortion detectability. In fact, the distortion detectability defines a (perceptually relevant norm on the underlying signal space which is beneficial for optimisation algorithms such as rate-distortion optimisation or linear predictive coding. We evaluate the merits of the model by combining it with a sinusoidal extraction method and compare the results with those obtained with the ISO MPEG-1 Layer I-II recommended model. Listening tests show a clear preference for the new model. More specifically, the model presented here leads to a reduction of more than 20% in terms of number of sinusoids needed to represent signals at a given quality level.

LSHINSE, Air Scattering Neutron and Gamma Dose rates for Complex Shielding Geometry

International Nuclear Information System (INIS)

Baran, A.; Gruen, M.; Leicht, R.

1991-01-01

1 - Description of program or function: The program LSHINSE is used to calculate the flux and the dose rate caused by gamma radiation emanating from a point source and being scattered in surrounding air. The program considers all forms of single scattering. Multiple scattering is taken into account in an approximate way by use of buildup factors. 2 - Method of solution: The program LSHINSE solves the equations for skyshine by use of Simpson integration. The integration limits are chosen such that the partial shielding is approximated by rectangular walls around the source. In addition, the attenuation of the primary radiation by a room ceiling can be calculated for several materials. By giving the height of the ceiling, the scattering in the air of the room can be calculated. By specifying energy groups the spectrum of the scattered radiation can be obtained. Valid energy range is 0.1 - 0.2 MeV, where the lower limit is due to uncertainties in the buildup factors. 3 - Restrictions on the complexity of the problem: The program is restricted to rectangular shielding problems involving gamma radiation in the range of 0.1 to 2.0 MeV

Coulomb Distortion in the Inelastic Regime

Energy Technology Data Exchange (ETDEWEB)

Patricia Solvignon, Dave Gaskell, John Arrington

2009-09-01

The Coulomb distortion effects have been for a long time neglected in deep inelastic scattering for the good reason that the incident energies were very high. But for energies in the range of earlier data from SLAC or at JLab, the Coulomb distortion could have the potential consequence of affecting the A-dependence of the EMC effect and of the longitudinal to transverse virtual photon absorption cross section ratio $R(x,Q^2)$.

Comparison of Engine/Inlet Distortion Measurements with MEMS and ESP Pressure Sensors

Science.gov (United States)

Soto, Hector L.; Hernandez, Corey D.

2004-01-01

A study of active-flow control in a small-scale boundary layer ingestion inlet was conducted at the NASA Langley Basic Aerodynamic Research Tunnel (BART). Forty MEMS pressure sensors, in a rake style configuration, were used to examine both the mean (DC) and high frequency (AC) components of the total pressure across the inlet/engine interface plane. The mean component was acquired and used to calculate pressure distortion. The AC component was acquired separately, at a high sampling rate, and is used to study the unsteady effects of the active-flow control. An identical total pressure rake, utilizing an Electronically Scanned Pressure (ESP) system, was also used to calculate distortion; a comparison of the results obtained using the two rakes is presented.

A low power and low distortion rail-to-rail input/output amplifier using constant current technique

International Nuclear Information System (INIS)

Liu Yan; Zhao Yiqiang; Zhang Shilin; Zhao Hongliang

2011-01-01

A rail-to-rail amplifier with constant transconductance, intended for audio processing, is presented. The constant transconductance is obtained by a constant current technique based on the input differential pairs operating in the weak inversion region. MOSFETs working in the weak inversion region have the advantages of low power and low distortion. The proposed rail-to-rail amplifier, fabricated in a standard 0.35 μm CMOS process, occupies a core die area of 75 x 183 μm 2 . Measured results show that the maximum power consumption is 85.37 μW with a supply voltage of 3.3 V and the total harmonic distortion level is 1.2% at 2 kHz. (semiconductor integrated circuits)

Impact of the MLC on the MRI field distortion of a prototype MRI-linac

International Nuclear Information System (INIS)

Kolling, Stefan; Keall, Paul; Oborn, Brad

2013-01-01

Purpose: To cope with intrafraction tumor motion, integrated MRI-linac systems for real-time image guidance are currently under development. The multileaf collimator (MLC) is a key component in every state-of-the-art radiotherapy treatment system, allowing for accurate field shaping and tumor tracking. This work quantifies the magnetic impact of a widely used MLC on the MRI field homogeneity for such a modality.Methods: The finite element method was employed to model a MRI-linac assembly comprised of a 1.0 T split-bore MRI magnet and the key ferromagnetic components of a Varian Millennium 120 MLC, namely, the leaves and motors. Full 3D magnetic field maps of the system were generated. From these field maps, the peak-to-peak distortion within the MRI imaging volume was evaluated over a 30 cm diameter sphere volume (DSV) around the isocenter and compared to a maximum preshim inhomogeneity of 300 μT. Five parametric studies were performed: (1) The source-to-isocenter distance (SID) was varied from 100 to 200 cm, to span the range of a compact system to that with lower magnetic coupling. (2) The MLC model was changed from leaves only to leaves with motors, to determine the contribution to the total distortion caused by MLC leaves and motors separately. (3) The system was configured in the inline or perpendicular orientation, i.e., the linac treatment beam was oriented parallel or perpendicular to the magnetic field direction. (4) The treatment field size was varied from 0 × 0 to 20×20 cm 2 , to span the range of clinical treatment fields. (5) The coil currents were scaled linearly to produce magnetic field strengths B 0 of 0.5, 1.0, and 1.5 T, to estimate how the MLC impact changes with B 0 .Results: (1) The MLC-induced MRI field distortion fell continuously with increasing SID. (2) MLC leaves and motors were found to contribute to the distortion in approximately equal measure. (3) Due to faster falloff of the fringe field, the field distortion was

Fast Rate Estimation for RDO Mode Decision in HEVC

Directory of Open Access Journals (Sweden)

Maxim P. Sharabayko

2014-12-01

Full Text Available The latter-day H.265/HEVC video compression standard is able to provide two-times higher compression efficiency compared to the current industrial standard, H.264/AVC. However, coding complexity also increased. The main bottleneck of the compression process is the rate-distortion optimization (RDO stage, as it involves numerous sequential syntax-based binary arithmetic coding (SBAC loops. In this paper, we present an entropy-based RDO estimation technique for H.265/HEVC compression, instead of the common approach based on the SBAC. Our RDO implementation reduces RDO complexity, providing an average bit rate overhead of 1.54%. At the same time, elimination of the SBAC from the RDO estimation reduces block interdependencies, thus providing an opportunity for the development of the compression system with parallel processing of multiple blocks of a video frame.

Vertical integration, credit ratings and retail price settings in energy-only markets. Navigating the Resource Adequacy problem

Energy Technology Data Exchange (ETDEWEB)

Simshauser, Paul [Level 22, 101 Miller Street, North Sydney, NSW 2060 (Australia)

2010-11-15

Energy-only markets are prone to the Resource Adequacy problem, i.e. the timely entry of new plant. The reason for this is that competitive energy-only markets struggle to be remunerative given reliability constraints and market price caps. Historically, Australia's 45,000 MW National Electricity Market has managed to navigate this well understood problem, albeit with government entities directly or indirectly responsible for a surprisingly large 73% of all new plant investments to 2007. But government involvement in direct investment has now ceased. So what will enable the industry to navigate the Resource Adequacy problem into the future? Quite simply, industrial organisation, the presence of merchant utilities with investment-grade credit ratings and setting any regulated retail prices or 'price to beat' with an LRMC floor. (author)

Vertical integration, credit ratings and retail price settings in energy-only markets: Navigating the Resource Adequacy problem

Energy Technology Data Exchange (ETDEWEB)

Simshauser, Paul, E-mail: psimshauser@agl.com.a [Level 22, 101 Miller Street, North Sydney, NSW 2060 (Australia)

2010-11-15

Energy-only markets are prone to the Resource Adequacy problem, i.e. the timely entry of new plant. The reason for this is that competitive energy-only markets struggle to be remunerative given reliability constraints and market price caps. Historically, Australia's 45,000 MW National Electricity Market has managed to navigate this well understood problem, albeit with government entities directly or indirectly responsible for a surprisingly large 73% of all new plant investments to 2007. But government involvement in direct investment has now ceased. So what will enable the industry to navigate the Resource Adequacy problem into the future? Quite simply, industrial organisation, the presence of merchant utilities with investment-grade credit ratings and setting any regulated retail prices or 'price to beat' with an LRMC floor.

Improved Control Strategies for a DFIG-Based Wind-Power Generation System with SGSC under Unbalanced and Distorted Grid Voltage Conditions

DEFF Research Database (Denmark)

Yao, Jun; Yu, Mengting; Hu, Weihao

2016-01-01

This paper investigates an improved control strategy for a doubly-fed induction generator (DFIG) based wind-power generation system with series grid-side converter (SGSC) under network unbalance and harmonic grid voltage distortion conditions. The integrated mathematical modeling of the DFIG system...... with SGSC is established by taking both the negative-sequence and harmonic components of the grid voltages into consideration with multiple synchronous rotating reference frames. Under network unbalance and harmonic distortion situations, stator voltage can be kept symmetrical and sinusoidal by the control...

Effects of image distortion correction on voxel-based morphometry

International Nuclear Information System (INIS)

Goto, Masami; Abe, Osamu; Kabasawa, Hiroyuki

2012-01-01

We aimed to show that correcting image distortion significantly affects brain volumetry using voxel-based morphometry (VBM) and to assess whether the processing of distortion correction reduces system dependency. We obtained contiguous sagittal T 1 -weighted images of the brain from 22 healthy participants using 1.5- and 3-tesla magnetic resonance (MR) scanners, preprocessed images using Statistical Parametric Mapping 5, and tested the relation between distortion correction and brain volume using VBM. Local brain volume significantly increased or decreased on corrected images compared with uncorrected images. In addition, the method used to correct image distortion for gradient nonlinearity produced fewer volumetric errors from MR system variation. This is the first VBM study to show more precise volumetry using VBM with corrected images. These results indicate that multi-scanner or multi-site imaging trials require correction for distortion induced by gradient nonlinearity. (author)

Mothers' Depressive State "Distorts" the Ratings of Depression They Give for Their Sons with an Autism Spectrum Disorder

Science.gov (United States)

Bitsika, Vicki; Sharpley, Christopher F.

2016-01-01

Depression is highly prevalent in children who have an Autism Spectrum Disorder (ASD), potentially confounding accurate diagnosis and treatment planning. Although information about the depressive status of a child is often collected from parents, there is evidence of distortion in parental assessments of their offspring's depression. This…

The SET1 Complex Selects Actively Transcribed Target Genes via Multivalent Interaction with CpG Island Chromatin

Directory of Open Access Journals (Sweden)

David A. Brown

2017-09-01

Full Text Available Chromatin modifications and the promoter-associated epigenome are important for the regulation of gene expression. However, the mechanisms by which chromatin-modifying complexes are targeted to the appropriate gene promoters in vertebrates and how they influence gene expression have remained poorly defined. Here, using a combination of live-cell imaging and functional genomics, we discover that the vertebrate SET1 complex is targeted to actively transcribed gene promoters through CFP1, which engages in a form of multivalent chromatin reading that involves recognition of non-methylated DNA and histone H3 lysine 4 trimethylation (H3K4me3. CFP1 defines SET1 complex occupancy on chromatin, and its multivalent interactions are required for the SET1 complex to place H3K4me3. In the absence of CFP1, gene expression is perturbed, suggesting that normal targeting and function of the SET1 complex are central to creating an appropriately functioning vertebrate promoter-associated epigenome.

Tomosynthesis-detected Architectural Distortion: Management Algorithm with Radiologic-Pathologic Correlation.

Science.gov (United States)

Durand, Melissa A; Wang, Steven; Hooley, Regina J; Raghu, Madhavi; Philpotts, Liane E

2016-01-01

As use of digital breast tomosynthesis becomes increasingly widespread, new management challenges are inevitable because tomosynthesis may reveal suspicious lesions not visible at conventional two-dimensional (2D) full-field digital mammography. Architectural distortion is a mammographic finding associated with a high positive predictive value for malignancy. It is detected more frequently at tomosynthesis than at 2D digital mammography and may even be occult at conventional 2D imaging. Few studies have focused on tomosynthesis-detected architectural distortions to date, and optimal management of these distortions has yet to be well defined. Since implementing tomosynthesis at our institution in 2011, we have learned some practical ways to assess architectural distortion. Because distortions may be subtle, tomosynthesis localization tools plus improved visualization of adjacent landmarks are crucial elements in guiding mammographic identification of elusive distortions. These same tools can guide more focused ultrasonography (US) of the breast, which facilitates detection and permits US-guided tissue sampling. Some distortions may be sonographically occult, in which case magnetic resonance imaging may be a reasonable option, both to increase diagnostic confidence and to provide a means for image-guided biopsy. As an alternative, tomosynthesis-guided biopsy, conventional stereotactic biopsy (when possible), or tomosynthesis-guided needle localization may be used to achieve tissue diagnosis. Practical uses for tomosynthesis in evaluation of architectural distortion are highlighted, potential complications are identified, and a working algorithm for management of tomosynthesis-detected architectural distortion is proposed. (©)RSNA, 2016.

The evolution of costly mate choice against segregation distorters.

Science.gov (United States)

Manser, Andri; Lindholm, Anna K; Weissing, Franz J

2017-12-01

The evolution of female preference for male genetic quality remains a controversial topic in sexual selection research. One well-known problem, known as the lek paradox, lies in understanding how variation in genetic quality is maintained in spite of natural selection and sexual selection against low-quality alleles. Here, we theoretically investigate a scenario where females pay a direct fitness cost to avoid males carrying an autosomal segregation distorter. We show that preference evolution is greatly facilitated under such circumstances. Because the distorter is transmitted in a non-Mendelian fashion, it can be maintained in the population despite directional sexual selection. The preference helps females avoid fitness costs associated with the distorter. Interestingly, we find that preference evolution is limited if the choice allele induces a very strong preference or if distortion is very strong. Moreover, the preference can only persist in the presence of a signal that reliably indicates a male's distorter genotype. Hence, even in a system where the lek paradox does not play a major role, costly preferences can only spread under specific circumstances. We discuss the importance of distorter systems for the evolution of costly female choice and potential implications for the use of artificial distorters in pest control. © 2017 The Author(s). Evolution © 2017 The Society for the Study of Evolution.

Spatial distortion in MRI with application to stereotactic neurosurgery

International Nuclear Information System (INIS)

Morgan, P.S.

1999-05-01

The aim of this work was to implement a thorough method for quantifying the errors introduced to frame-based neurosurgical stereotactic procedures by the use of MRI. Chang and Fitzpatrick's reversed gradient distortion correction method was used, in combination with a phantom, to measure these errors. Spatial distortion in MR images of between 1 mm and 2 mm was measured. Further analysis showed that this typically introduced an additional error in the coordinate of the actual treatment point of 0.7 mm. The implications of this are discussed. The main source of distortion in the MR images used for stereotaxis was found to be the head ring. A comparison between imaging sequences and MR scanners revealed that the spatial distortion depends mainly on the bandwidth per pixel of the sequence rather than other differences in the imaging sequences. By comparison with a phase map distortion correction technique, the imaging parameters required to allow successful distortion correction with the reversed gradient method were identified. The most important was the use of full Fourier spin echo acquisitions. The reversed gradient correction method was applied to two contemporary EPI techniques. Considerable improvement was seen in the production of ADC maps after the images had been corrected for distortion. The method also was shown to be valid in application to BOLD fMRl data. (author)

Distortion dependent intersystem crossing

DEFF Research Database (Denmark)

Stephansen, Anne Boutrup; Sølling, Theis Ivan

2017-01-01

. The effect is observed to increase in the presence of methyl-groups on the pinnacle carbon-atoms, where largest extents of r and p orbital-mixing are observed. This is fully consistent with the time-resolved spectroscopy data: Toluene and p-xylene show evidence for ultrafast triplet formation competing......The competition between ultrafast intersystem crossing and internal conversion in benzene, toluene, and p-xylene is investigated with time-resolved photoelectron spectroscopy and quantum chemical calculations. By exciting to S2 out-of-plane symmetry breaking, distortions are activated at early...... times whereupon spin-forbidden intersystem crossing becomes (partly) allowed. Natural bond orbital analysis suggests that the pinnacle carbon atoms distorting from the aromatic plane change hybridization between the planar Franck-Condon geometry and the deformed (boat-shaped) S2 equilibrium geometry...

30 CFR 75.601-1 - Short circuit protection; ratings and settings of circuit breakers.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Short circuit protection; ratings and settings... Trailing Cables § 75.601-1 Short circuit protection; ratings and settings of circuit breakers. Circuit breakers providing short circuit protection for trailing cables shall be set so as not to exceed the...

Revitalizing the setting approach

DEFF Research Database (Denmark)

Bloch, Paul; Toft, Ulla; Reinbach, Helene Christine

2014-01-01

BackgroundThe concept of health promotion rests on aspirations aiming at enabling people to increase control over and improve their health. Health promotion action is facilitated in settings such as schools, homes and work places. As a contribution to the promotion of healthy lifestyles, we have ...... approach is based on ecological and whole-systems thinking, and stipulates important principles and values of integration, participation, empowerment, context and knowledge-based development....... further developed the setting approach in an effort to harmonise it with contemporary realities (and complexities) of health promotion and public health action. The paper introduces a modified concept, the supersetting approach, which builds on the optimised use of diverse and valuable resources embedded...... in local community settings and on the strengths of social interaction and local ownership as drivers of change processes. Interventions based on a supersetting approach are first and foremost characterised by being integrated, but also participatory, empowering, context-sensitive and knowledge...

Chirality in distorted square planar Pd(O,N)2 compounds.

Science.gov (United States)

Brunner, Henri; Bodensteiner, Michael; Tsuno, Takashi

2013-10-01

Salicylidenimine palladium(II) complexes trans-Pd(O,N)2 adopt step and bowl arrangements. A stereochemical analysis subdivides 52 compounds into 41 step and 11 bowl types. Step complexes with chiral N-substituents and all the bowl complexes induce chiral distortions in the square planar system, resulting in Δ/Λ configuration of the Pd(O,N)2 unit. In complexes with enantiomerically pure N-substituents ligand chirality entails a specific square chirality and only one diastereomer assembles in the lattice. Dimeric Pd(O,N)2 complexes with bridging N-substituents in trans-arrangement are inherently chiral. For dimers different chirality patterns for the Pd(O,N)2 square are observed. The crystals contain racemates of enantiomers. In complex two independent molecules form a tight pair. The (RC) configuration of the ligand induces the same Δ chirality in the Pd(O,N)2 units of both molecules with varying square chirality due to the different crystallographic location of the independent molecules. In complexes and atrop isomerism induces specific configurations in the Pd(O,N)2 bowl systems. The square chirality is largest for complex [(Diop)Rh(PPh3 )Cl)], a catalyst for enantioselective hydrogenation. In the lattice of two diastereomers with the same (RC ,RC) configuration in the ligand Diop but opposite Δ and Λ square configurations co-crystallize, a rare phenomenon in stereochemistry. © 2013 Wiley Periodicals, Inc.

Geochemistry and paleotectonomagmatic setting of metabasites protolith from Asalem metamorphic complex (northwest Rasht

Directory of Open Access Journals (Sweden)

Mohsen Nasrabady

2016-12-01

Full Text Available Asalem metamorphic complex consists mostly of metabasite, metapelite and serpentinite. Metabasites display metamorphic features of greenschist and blueschist facies. Greenschist facies rocks that found as both foliated and massive types contain mineralogical assemblage of actinolite, chlorite, albite and epidote. Blueschists contain mineralogical assemblage of sodic amphibole, epidote and phengite. Whole rock analyses of the metabasites indicate basaltic to andesitic composition with mainly calcalkaline nature of their protolith. According to the discrimination diagrams of tectonomagmatic setting, the protolith of investigated metabasites has been islands arc and somewhat mid ocean ridge. The patterns of rare earth elements and spider diagrams of the Asalem metabasites resemble to the basic and intermediate magmatism of islands arc or suprasubduction setting as well. Greenschists and blueschists facies rocks of the Asalem metamorphic complex have been probably equivalent to islands arc or young and hot oceanic crust of suprasubduction zone setting. This portion of oceanic basin unlike the subducted even and thick oceanic lithosphere of Paleotethys during accretion in the shallower levels of accretionary prisms, have underwent metamorphic conditions of blueschist and greenschist facies and finally gave rise to the formation of the metabasites of the Asalem metamorphic complex.

An optical technique to measure distortion in heat-treated parts in-situ

Science.gov (United States)

Sciammarella, Federico; Nash, Phillip

2005-05-01

Improvements in the properties of aluminum alloys have made them more popular for structural applications. Using the different heat treatments that are available, aluminum alloys can have a wide variation in properties for different types of applications. The appropriate heat treatments of these alloys are vital in providing the properties needed for their particular applications. Moreover, understanding the effects of heat treatments that may cause distortion to a part is critical. Most of the work carried out in this field is in the form of pre- and post-treatment analysis of a part. In this study, in-situ measurements of the distortions that a heat-treated part undergoes when subjected to rapid heating to temperatures near melting followed by slow cooling were carried out. A numerical model was built to simulate the experiment and the results are compared. This study will provide much-needed insight into the complex occurrences that aluminum parts undergo during heat treatment.

Coordination Behavior of Ni2+, Cu2+, and Zn2+ in Tetrahedral 1-Methylimidazole Complexes: A DFT/CSD Study

OpenAIRE

Tetteh, Samuel

2018-01-01

The interaction between nickel (Ni2+), copper (Cu2+), and zinc (Zn2+) ions and 1-methylimidazole has been studied by exploring the geometries of eleven crystal structures in the Cambridge Structural Database (CSD). The coordination behavior of the respective ions was further investigated by means of density functional theory (DFT) methods. The gas-phase complexes were fully optimized using B3LYP/GENECP functionals with 6-31G∗ and LANL2DZ basis sets. The Ni2+ and Cu2+ complexes show distorted ...

Economic choices reveal probability distortion in macaque monkeys.

Science.gov (United States)

Stauffer, William R; Lak, Armin; Bossaerts, Peter; Schultz, Wolfram

2015-02-18

Economic choices are largely determined by two principal elements, reward value (utility) and probability. Although nonlinear utility functions have been acknowledged for centuries, nonlinear probability weighting (probability distortion) was only recently recognized as a ubiquitous aspect of real-world choice behavior. Even when outcome probabilities are known and acknowledged, human decision makers often overweight low probability outcomes and underweight high probability outcomes. Whereas recent studies measured utility functions and their corresponding neural correlates in monkeys, it is not known whether monkeys distort probability in a manner similar to humans. Therefore, we investigated economic choices in macaque monkeys for evidence of probability distortion. We trained two monkeys to predict reward from probabilistic gambles with constant outcome values (0.5 ml or nothing). The probability of winning was conveyed using explicit visual cues (sector stimuli). Choices between the gambles revealed that the monkeys used the explicit probability information to make meaningful decisions. Using these cues, we measured probability distortion from choices between the gambles and safe rewards. Parametric modeling of the choices revealed classic probability weighting functions with inverted-S shape. Therefore, the animals overweighted low probability rewards and underweighted high probability rewards. Empirical investigation of the behavior verified that the choices were best explained by a combination of nonlinear value and nonlinear probability distortion. Together, these results suggest that probability distortion may reflect evolutionarily preserved neuronal processing. Copyright © 2015 Stauffer et al.

Distortion definition and correction in off-axis systems

Science.gov (United States)

Da Deppo, Vania; Simioni, Emanuele; Naletto, Giampiero; Cremonese, Gabriele

2015-09-01

Off-axis optical configurations are becoming more and more used in a variety of applications, in particular they are the most preferred solution for cameras devoted to Solar System planets and small bodies (i.e. asteroids and comets) study. Off-axis designs, being devoid of central obstruction, are able to guarantee better PSF and MTF performance, and thus higher contrast imaging capabilities with respect to classical on-axis designs. In particular they are suitable for observing extended targets with intrinsic low contrast features, or scenes where a high dynamical signal range is present. Classical distortion theory is able to well describe the performance of the on-axis systems, but it has to be adapted for the off-axis case. A proper way to deal with off-axis distortion definition is thus needed together with dedicated techniques to accurately measure and hence remove the distortion effects present in the acquired images. In this paper, a review of the distortion definition for off-axis systems will be given. In particular the method adopted by the authors to deal with the distortion related issues (definition, measure, removal) in some off-axis instruments will be described in detail.

Sleep stage classification with low complexity and low bit rate.

Science.gov (United States)

Virkkala, Jussi; Värri, Alpo; Hasan, Joel; Himanen, Sari-Leena; Müller, Kiti

2009-01-01

Standard sleep stage classification is based on visual analysis of central (usually also frontal and occipital) EEG, two-channel EOG, and submental EMG signals. The process is complex, using multiple electrodes, and is usually based on relatively high (200-500 Hz) sampling rates. Also at least 12 bit analog to digital conversion is recommended (with 16 bit storage) resulting in total bit rate of at least 12.8 kbit/s. This is not a problem for in-house laboratory sleep studies, but in the case of online wireless self-applicable ambulatory sleep studies, lower complexity and lower bit rates are preferred. In this study we further developed earlier single channel facial EMG/EOG/EEG-based automatic sleep stage classification. An algorithm with a simple decision tree separated 30 s epochs into wakefulness, SREM, S1/S2 and SWS using 18-45 Hz beta power and 0.5-6 Hz amplitude. Improvements included low complexity recursive digital filtering. We also evaluated the effects of a reduced sampling rate, reduced number of quantization steps and reduced dynamic range on the sleep data of 132 training and 131 testing subjects. With the studied algorithm, it was possible to reduce the sampling rate to 50 Hz (having a low pass filter at 90 Hz), and the dynamic range to 244 microV, with an 8 bit resolution resulting in a bit rate of 0.4 kbit/s. Facial electrodes and a low bit rate enables the use of smaller devices for sleep stage classification in home environments.

Investigation of the 4D composite MR image distortion field associated with tumor motion for MR-guided radiotherapy.

Science.gov (United States)

Stanescu, T; Jaffray, D

2016-03-01

Magnetic resonance (MR) images are affected by geometric distortions due to the specifics of the MR scanner and patient anatomy. Quantifying the distortions associated with mobile tumors is particularly challenging due to real anatomical changes in the tumor's volume, shape, and relative location within the MR imaging volume. In this study, the authors investigate the 4D composite distortion field, which combines the effects of the susceptibility-induced and system-related distortion fields, experienced by mobile lung tumors. The susceptibility (χ) effects were numerically simulated for two specific scenarios: (a) a full motion cycle of a lung tumor due to breathing as depicted on ten phases of a 4D CBCT data set and (b) varying the tumor size and location in lung tissue via a synthetically generated sphere with variable diameter (4-80 mm). The χ simulation procedure relied on the segmentation and generation of 3D susceptibility (χ) masks and computation of the magnetic field by means of finite difference methods. A system-related distortion field, determined with a phantom and image processing algorithm, was used as a reference. The 4D composite distortion field was generated as the vector summation of the χ-induced and system-related fields. The analysis was performed for two orientations of the main magnetic field (B0), which correspond to several MRIgRT system configurations. Specifically, B0 was set along the z-axis as in the case of a cylindrical-bore scanner and in the (x,y)-plane as for a biplanar MR. Computations were also performed for a full revolution at 15° increments in the case of a rotating biplanar magnet. Histograms and metrics such as maximum, mean, and range were used to evaluate the characteristics of the 4D distortion field. The χ-induced field depends on the change in volume and shape of the moving tumor as well as the local surrounding anatomy. In the case of system-related distortions, the tumor experiences increased field

Word Recognition for Temporally and Spectrally Distorted Materials

DEFF Research Database (Denmark)

Smith, Sherri L.; Pichora-Fuller, Margaret Kathleen; Wilson, Richard H.

2012-01-01

listeners with near-normal hearing and hearing loss performed best in the unaltered condition, followed by the jitter and smear conditions, with the poorest performance in the combined jitter-smear condition in both quiet and noise. Overall, listeners with near-normal hearing performed better than listeners...... to predict group differences, but not the effects of distortion. Individual differences in performance were similar across all distortion conditions with both age and hearing loss being implicated. The speech materials needed to be both spectrally and temporally distorted to mimic the effects of age...

Modifications in the rhombohedral degree of distortion and magnetic properties of Ba-doped BiFeO3 as a function of synthesis methodology

International Nuclear Information System (INIS)

Rojas-George, G.; Silva, J.; Castañeda, R.; Lardizábal, D.; Graeve, O.A.; Fuentes, L.; Reyes-Rojas, A.

2014-01-01

We present an analysis of crystallographic symmetry and the origin of the pseudo-cubic character of doped BiFeO 3 . Specifically, barium-doped bismuth ferrite, Bi 1−x Ba x FeO 3 (x = 0.05, 0.075, 0.1, 0.125), perovskite-type nanoparticles have been synthesized by implementing five modifications to the sol–gel technique (citric acid-assisted sol–gel method, ethylene glycol method, tartaric acid-assisted sol–gel method, polyvinyl alcohol–ethylene glycol method, and EDTA complexing sol–gel method) and their final pseudo-cubic character is discussed. The effect of the carboxylic groups and hydroxyl groups during synthesis is critical to obtain single phase BBFO. Fourier transform infrared spectroscopy and thermogravimetric analysis is used to study the decomposition and thermal behavior of the precursors and their relation to the final nanoparticle characteristics. X-ray diffraction analysis shows a single phase with symmetry changes for four of the five synthesis methodologies employed. Only the EDTA complexing sol–gel method, where EDTA is used as dissolver and chelating agent, is not satisfactory in all concentration ranges. Rietveld results suggest that the degree of distortion of the rhombohedral symmetry in the crystallized BiFeO 3 powders decreases 12% as a result of progressive substitution of Bi 3+ by Ba 2+ and that there is no shift from rhombohedral to tetragonal symmetry. Magnetization properties of samples with a low-distortion rhombohedral structure show higher magnetic saturation and remanent magnetization than samples with high-distortion rhombohedral structure. - Highlights: • Ba–BiFeO 3 : rhombohedral distortion degree is highly affected by the chemical method. • Rietveld results show no shift in BBFO from rhombohedral to tetragonal symmetry. • The low-distortion rhombohedral structure show higher magnetic saturation. • To stabilize a metal complex is necessary a balance between COOH − and OH − groups

Are there common mechanisms in sensation seeking and reality distortion in schizophrenia? A study using memory event-related potentials.

Science.gov (United States)

Guillem, François; Pampoulova, Tania; Stip, Emmanuel; Todorov, Christo; Lalonde, Pierre

2005-05-15

A growing literature suggests that the characteristics of sensation seeking and reality distortion expressed in schizophrenia share several mechanisms. In a previous study, the comparison of patients with high vs. low reality distortion using event-related potentials (ERPs) recorded in a recognition memory task for unfamiliar faces identified neural and cognitive anomalies specifically related to the expression of these symptoms. As a follow-up, this study investigated the ERP correlates of sensation seeking in schizophrenia using the same recognition memory protocol. ERPs have been recorded in controls (N=21) and schizophrenia patients separated into high (HSS; N=13) and low (LSS; N=17) scorers according to Zuckerman's Sensation Seeking Scale. The results show a reduced P2a that was found unrelated to reality distortion in the previous study of reality distortion. It identifies interference inhibition impairment as being specifically related to sensation seeking. On the other hand, HSS scorers display enhanced fronto-central and normal P600 effects also found in high reality distortion patients. These results indicate inappropriate context processing and mnemonic binding common to sensation seeking and reality distortion. LSS scorers also display a reduced temporal N300 similar to that found in low reality distortion patients. This anomaly could reflect the lower reactivity to emotionally significant stimuli that underlies anhedonia symptoms. Finally, the N400 effect and a late frontal effect are found in both HSS and LSS. Since they were unrelated to reality distortion, these indices have been related to basic aspects of schizophrenia, e.g., deficient knowledge integration, or other mechanisms, e.g. anxiety or impulsivity. In summary, the present study examines the strategy of investigating variables, such as temperamental characteristics, in addition to symptoms, to show how discrete impairments may contribute to the expression of the illness.

Interliminal Design: Understanding cognitive heuristics to mitigate design distortion

Directory of Open Access Journals (Sweden)

Andrew McCollough

2014-12-01

Full Text Available Cognitive heuristics are mental shortcuts adapted over time to enable rapid interpretation of our complex environment. They are intrinsic to human cognition and resist modification. Heuristics applied outside the context to which they are best suited are termed cognitive bias, and are the cause of systematic errors in judgment and reasoning. As both a cognitive and intuitive discipline, design by individuals is vulnerable to context-inappropriate heuristic usage. Designing in groups can act positively to counterbalance these tendencies, but is subject to heuristic misuse and biases particular to social environments. Mismatch between desired and actual outcomes– termed here, design distortion – occurs when such usage goes unnoticed and unaddressed, and can affect multiple dimensions of a system. We propose a methodology, interliminal design, emerging from the Program in Collaborative Design at Pacific Northwest College of Art, to specifically address the influence of cognitive heuristics in design. This adaptive approach involves reflective, dialogic, inquiry-driven practices intended to increase awareness of heuristic usage, and identify aspects of the design process vulnerable to misuse on both individual and group levels. By facilitating the detection and mitigation of potentially costly errors in judgment and decision-making that create distortion, such metacognitive techniques can meaningfully improve design.

Setting priorities for environmental restoration at the DOE Nuclear Weapons Complex

International Nuclear Information System (INIS)

Ton, My K.; Morgan, Robert P.

1992-01-01

This paper provides an evaluation of the computerized methodologies and approaches that the Department of Energy (DOE) has developed to assist in setting cleanup priorities and in allocating Environmental Restoration funds to various activities within the DOE Nuclear Weapons Complex. Issues examined include the appropriateness of the methodologies for priority setting or budget planning, their strengths and weaknesses; the limitations to the use of such systems to aid decision making; public acceptance of these systems; and the level of participation by affected or interested parties and the public in the development and implementation processes. (author)

Application of integral-separated PID algorithm in orbit feedback

International Nuclear Information System (INIS)

Xuan, K.; Bao, X.; Li, C.; Li, W.; Liu, G.; Wang, J.; Wang, L.

2012-01-01

The algorithm in the feedback system has important influence on the performance of the beam orbit. PID (Proportion Integration Differentiation) algorithm is widely used in the beam orbit feedback system; however, the deficiency of PID algorithm is a big overshooting in strong perturbations. In order to overcome the deficiencies, the integral-separated PID algorithm is developed. When the closed orbit distortion is too large, it cancels integration action until the closed orbit distortion is lower than the separation threshold value. The implementation of integral-separated PID algorithm with MATLAB is described in this paper. The simulation results show that this algorithm can improve the control precision. (authors)

On Models with Uncountable Set of Spin Values on a Cayley Tree: Integral Equations

International Nuclear Information System (INIS)

Rozikov, Utkir A.; Eshkobilov, Yusup Kh.

2010-01-01

We consider models with nearest-neighbor interactions and with the set [0, 1] of spin values, on a Cayley tree of order k ≥ 1. We reduce the problem of describing the 'splitting Gibbs measures' of the model to the description of the solutions of some nonlinear integral equation. For k = 1 we show that the integral equation has a unique solution. In case k ≥ 2 some models (with the set [0, 1] of spin values) which have a unique splitting Gibbs measure are constructed. Also for the Potts model with uncountable set of spin values it is proven that there is unique splitting Gibbs measure.

Globalization, tax distortions and public sector retrenchment

DEFF Research Database (Denmark)

Andersen, Torben M.; Sørensen, Allan

is strengthened by globalization, it is inferred that the marginal costs of public funds increase and a retrenchment of the public sector follows. We challenge whether these conclusions have support in a general equilibrium model featuring standard effects from open macroeconomics and trade theory. Even though...... income taxation unambiguously worsens wage competitiveness, it does not follow that marginal costs of public funds increase with product market integration due to gains from trade. Moreover, non-cooperative fiscal policies do not have a race-to-the-bottom bias despite that taxes harm competitiveness......It is widely perceived that globalization is a threat to tax financed public sector activities. The argument is that public activities (public consumption and transfers) financed by income taxes distort labour markets and cause higher wages and thus a loss of competitiveness. Since this link...

Fisheye image rectification using spherical and digital distortion models

Science.gov (United States)

Li, Xin; Pi, Yingdong; Jia, Yanling; Yang, Yuhui; Chen, Zhiyong; Hou, Wenguang

2018-02-01

Fisheye cameras have been widely used in many applications including close range visual navigation and observation and cyber city reconstruction because its field of view is much larger than that of a common pinhole camera. This means that a fisheye camera can capture more information than a pinhole camera in the same scenario. However, the fisheye image contains serious distortion, which may cause trouble for human observers in recognizing the objects within. Therefore, in most practical applications, the fisheye image should be rectified to a pinhole perspective projection image to conform to human cognitive habits. The traditional mathematical model-based methods cannot effectively remove the distortion, but the digital distortion model can reduce the image resolution to some extent. Considering these defects, this paper proposes a new method that combines the physical spherical model and the digital distortion model. The distortion of fisheye images can be effectively removed according to the proposed approach. Many experiments validate its feasibility and effectiveness.

Distortions in the output signals of conventional spectrum analyzers

International Nuclear Information System (INIS)

Njau, E.C.

1988-08-01

We show that the output signals of conventional spectrum analysers contain distortions which basically originate from the signal processing performed inside the analysers' frequency convertors. Total elimination of these distortions through normal filtering techniques is difficult owing to the closeness of some of their frequencies to the corresponding frequencies of the required signals. Simple design adjustments that can minimize these distortions are suggested. (author). 7 refs, 2 figs

Integrator complex plays an essential role in adipose differentiation

International Nuclear Information System (INIS)

Otani, Yuichiro; Nakatsu, Yusuke; Sakoda, Hideyuki; Fukushima, Toshiaki; Fujishiro, Midori; Kushiyama, Akifumi; Okubo, Hirofumi; Tsuchiya, Yoshihiro; Ohno, Haruya; Takahashi, Shin-Ichiro; Nishimura, Fusanori; Kamata, Hideaki; Katagiri, Hideki; Asano, Tomoichiro

2013-01-01

Highlights: •IntS6 and IntS11 are subunits of the Integrator complex. •Expression levels of IntS6 and IntS11 were very low in 3T3-L1 fibroblast. •IntS6 and IntS11 were upregulated during adipose differentiation. •Suppression of IntS6 or IntS11 expression inhibited adipose differentiation. -- Abstract: The dynamic process of adipose differentiation involves stepwise expressions of transcription factors and proteins specific to the mature fat cell phenotype. In this study, it was revealed that expression levels of IntS6 and IntS11, subunits of the Integrator complex, were increased in 3T3-L1 cells in the period when the cells reached confluence and differentiated into adipocytes, while being reduced to basal levels after the completion of differentiation. Suppression of IntS6 or IntS11 expression using siRNAs in 3T3-L1 preadipocytes markedly inhibited differentiation into mature adipocytes, based on morphological findings as well as mRNA analysis of adipocyte-specific genes such as Glut4, perilipin and Fabp4. Although Pparγ2 protein expression was suppressed in IntS6 or IntS11-siRNA treated cells, adenoviral forced expression of Pparγ2 failed to restore the capacity for differentiation into mature adipocytes. Taken together, these findings demonstrate that increased expression of Integrator complex subunits is an indispensable event in adipose differentiation. Although further study is necessary to elucidate the underlying mechanism, the processing of U1, U2 small nuclear RNAs may be involved in cell differentiation steps

The SET1 Complex Selects Actively Transcribed Target Genes via Multivalent Interaction with CpG Island Chromatin.

Science.gov (United States)

Brown, David A; Di Cerbo, Vincenzo; Feldmann, Angelika; Ahn, Jaewoo; Ito, Shinsuke; Blackledge, Neil P; Nakayama, Manabu; McClellan, Michael; Dimitrova, Emilia; Turberfield, Anne H; Long, Hannah K; King, Hamish W; Kriaucionis, Skirmantas; Schermelleh, Lothar; Kutateladze, Tatiana G; Koseki, Haruhiko; Klose, Robert J

2017-09-05

Chromatin modifications and the promoter-associated epigenome are important for the regulation of gene expression. However, the mechanisms by which chromatin-modifying complexes are targeted to the appropriate gene promoters in vertebrates and how they influence gene expression have remained poorly defined. Here, using a combination of live-cell imaging and functional genomics, we discover that the vertebrate SET1 complex is targeted to actively transcribed gene promoters through CFP1, which engages in a form of multivalent chromatin reading that involves recognition of non-methylated DNA and histone H3 lysine 4 trimethylation (H3K4me3). CFP1 defines SET1 complex occupancy on chromatin, and its multivalent interactions are required for the SET1 complex to place H3K4me3. In the absence of CFP1, gene expression is perturbed, suggesting that normal targeting and function of the SET1 complex are central to creating an appropriately functioning vertebrate promoter-associated epigenome. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Analysis of the sintering stresses and shape distortion produced in co-firing of CGO-LSM/CGO bi-layer porous structures

DEFF Research Database (Denmark)

Ni, De Wei; Esposito, Vincenzo; Schmidt, Cristine Grings

such as cracks, de-lamination and shape distortion can result as a consequence of sintering mismatch stresses caused by the strain rate difference between layers. This work seeks to understand the underlying mechanisms that occur during the co-firing of porous CGO-LSM/CGO bi-layer laminates, by evaluating...... the sintering mismatch stress and distortion development through modeling and experiments....

Appraisal Distortions and Intimate Partner Violence: Gender, Power, and Interaction

Science.gov (United States)

Whiting, Jason B.; Oka, Megan; Fife, Stephen T.

2012-01-01

In relationships characterized by control, abuse, or violence, many appraisal distortions occur including denial and minimization. However, the nature of the distortion varies depending on the individual's role in the relationship (i.e., abuser or victim). Reducing these distortions is an important component in treatment success and involves…

Product Market Integration, Comparative Advantages and Labour Market Performance

DEFF Research Database (Denmark)

Andersen, Torben M.; Rose Skaksen, Jan

2004-01-01

of the specialization gains are similar to anincrease in labour productivity, whereas the labour market reform effectis similar to an increase in the degree of competition in the labourmarket. Wages, employment and welfare increase as a result of furtherproduct market integration. It is interesting to note......In this paper, we set up a two-country general equilibrium modelwhere trade unions have wage bargaining power. We show that adecrease in trade distortions inducing further product market integrationgives rise to specialization gains as well as a labour market reformeffect. The implications...... that the labourmarket reform effect of product market integration is achieved despitean increase in the wage level.JEL Classification: F15, J30, J50.Keywords: Trade frictions, wage formation, employment, welfaregains....

Evidence of two-channel distortion effects in positronium formation reactions

International Nuclear Information System (INIS)

Macri, P A; Miraglia, J E; Hanssen, J; Fojon, O A; Rivarola, R D

2004-01-01

The formation of ground-state positronium in collisions of positrons on hydrogen-like atoms is considered. In previous theoretical works, two-centre distorted wavefunctions were employed to approximate either the initial or the final channel. Here we report results obtained by means of the eikonal final state continuum distorted wave approximation for which asymptotically correct distorted wavefunctions are used for both the initial and final states of the scattering system. Comparison of the present theoretical total cross sections with experimental data reveals that distortion effects become important in both channels as the impact energy decreases. This work also shows that distorted-wave theories may be extended from their usual domain of high impact energies to lower ones. (letter to the editor)

Evidence of two-channel distortion effects in positronium formation reactions

Energy Technology Data Exchange (ETDEWEB)

Macri, P A [Instituto de AstronomIa y FIsica del Espacio, Consejo Nacional de Investigaciones CientIficas y Tecnicas-Universidad de Buenos Aires, Casilla de Correo 67, Suc. 28, 1428 Buenos Aires (Argentina); Miraglia, J E [Instituto de AstronomIa y FIsica del Espacio, Consejo Nacional de Investigaciones CientIficas y Tecnicas-Universidad de Buenos Aires, Casilla de Correo 67, Suc. 28, 1428 Buenos Aires (Argentina); Hanssen, J [Laboratoire de Physique Moleculaire et des Collisions, Institute de Physique Rue Arago, Tecnopole 2000, Metz (France); Fojon, O A [Instituto de FIsica de Rosario, Consejo Nacional de Investigaciones CientIficas y Tecnicas-Universidad Nacional de Rosario, Av. Pellegrini 250, 2000 Rosario (Argentina); Rivarola, R D [Instituto de FIsica de Rosario, Consejo Nacional de Investigaciones CientIficas y Tecnicas-Universidad Nacional de Rosario, Av. Pellegrini 250, 2000 Rosario (Argentina)

2004-03-28

The formation of ground-state positronium in collisions of positrons on hydrogen-like atoms is considered. In previous theoretical works, two-centre distorted wavefunctions were employed to approximate either the initial or the final channel. Here we report results obtained by means of the eikonal final state continuum distorted wave approximation for which asymptotically correct distorted wavefunctions are used for both the initial and final states of the scattering system. Comparison of the present theoretical total cross sections with experimental data reveals that distortion effects become important in both channels as the impact energy decreases. This work also shows that distorted-wave theories may be extended from their usual domain of high impact energies to lower ones. (letter to the editor)

Testing inflation and curvaton scenarios with CMB distortions

International Nuclear Information System (INIS)

Clesse, Sébastien; Garbrecht, Björn; Zhu, Yi

2014-01-01

Prior to recombination, Silk damping causes the dissipation of energy from acoustic waves into the monopole of the Cosmic Microwave Background (CMB), resulting in spectral distortions. These can be used to probe the primordial scalar power spectrum on smaller scales than it is possible with CMB anisotropies. An enhancement of power on these scales is nevertheless required for the resulting distortions to be detectable by future experiments like PIXIE. In this paper, we examine all 49 single-field inflation models listed by Martin et al. in the Encyclopaedia Inflationaris [1] and find that only one of these may lead to a detectable level of distortions in a tuned region of its parameter space, namely the original hybrid model. Three effective multi-field scenarios are also studied: with softly and suddenly turning trajectories, and with a mild waterfall trajectory. Softly turning trajectories do not induce distortions at any detectable level, whereas a sudden turn in the field space or a mild waterfall trajectory predicts a peak (plus damped oscillations in the sudden turn case) in the scalar power spectrum, which can lead to an observable amount of CMB distortions. Finally, another scenario leading to potentially detectable distortions involves a curvaton whose blue spectrum is subdominant on CMB angular scales and overtakes the inflaton spectrum on smaller scales. In this case however, we show that the bounds from ultra compact minihaloes are not satisfied. Expectations for an ultimate PRISM-class experiment characterized by an improvement in sensitivity by a factor of ten are discussed for some models

Testing inflation and curvaton scenarios with CMB distortions

Science.gov (United States)

Clesse, Sébastien; Garbrecht, Björn; Zhu, Yi

2014-10-01

Prior to recombination, Silk damping causes the dissipation of energy from acoustic waves into the monopole of the Cosmic Microwave Background (CMB), resulting in spectral distortions. These can be used to probe the primordial scalar power spectrum on smaller scales than it is possible with CMB anisotropies. An enhancement of power on these scales is nevertheless required for the resulting distortions to be detectable by future experiments like PIXIE. In this paper, we examine all 49 single-field inflation models listed by Martin et al. in the Encyclopaedia Inflationaris [1] and find that only one of these may lead to a detectable level of distortions in a tuned region of its parameter space, namely the original hybrid model. Three effective multi-field scenarios are also studied: with softly and suddenly turning trajectories, and with a mild waterfall trajectory. Softly turning trajectories do not induce distortions at any detectable level, whereas a sudden turn in the field space or a mild waterfall trajectory predicts a peak (plus damped oscillations in the sudden turn case) in the scalar power spectrum, which can lead to an observable amount of CMB distortions. Finally, another scenario leading to potentially detectable distortions involves a curvaton whose blue spectrum is subdominant on CMB angular scales and overtakes the inflaton spectrum on smaller scales. In this case however, we show that the bounds from ultra compact minihaloes are not satisfied. Expectations for an ultimate PRISM-class experiment characterized by an improvement in sensitivity by a factor of ten are discussed for some models.

Reaction Order Ambiguity in Integrated Rate Plots

Science.gov (United States)

Lee, Joe

2008-01-01

Integrated rate plots are frequently used in reaction kinetics to determine orders of reactions. It is often emphasised, when using this methodology in practice, that it is necessary to monitor the reaction to a substantial fraction of completion for these plots to yield unambiguous orders. The present article gives a theoretical and statistical…

PANDORA: keyword-based analysis of protein sets by integration of annotation sources.

Science.gov (United States)

Kaplan, Noam; Vaaknin, Avishay; Linial, Michal

2003-10-01

Recent advances in high-throughput methods and the application of computational tools for automatic classification of proteins have made it possible to carry out large-scale proteomic analyses. Biological analysis and interpretation of sets of proteins is a time-consuming undertaking carried out manually by experts. We have developed PANDORA (Protein ANnotation Diagram ORiented Analysis), a web-based tool that provides an automatic representation of the biological knowledge associated with any set of proteins. PANDORA uses a unique approach of keyword-based graphical analysis that focuses on detecting subsets of proteins that share unique biological properties and the intersections of such sets. PANDORA currently supports SwissProt keywords, NCBI Taxonomy, InterPro entries and the hierarchical classification terms from ENZYME, SCOP and GO databases. The integrated study of several annotation sources simultaneously allows a representation of biological relations of structure, function, cellular location, taxonomy, domains and motifs. PANDORA is also integrated into the ProtoNet system, thus allowing testing thousands of automatically generated clusters. We illustrate how PANDORA enhances the biological understanding of large, non-uniform sets of proteins originating from experimental and computational sources, without the need for prior biological knowledge on individual proteins.

Detection of architectural distortion in prior screening mammograms using Gabor filters, phase portraits, fractal dimension, and texture analysis

International Nuclear Information System (INIS)

Rangayyan, Rangaraj M.; Prajna, Shormistha; Ayres, Fabio J.; Desautels, J.E.L.

2008-01-01

Mammography is a widely used screening tool for the early detection of breast cancer. One of the commonly missed signs of breast cancer is architectural distortion. The purpose of this study is to explore the application of fractal analysis and texture measures for the detection of architectural distortion in screening mammograms taken prior to the detection of breast cancer. A method based on Gabor filters and phase portrait analysis was used to detect initial candidates for sites of architectural distortion. A total of 386 regions of interest (ROIs) were automatically obtained from 14 ''prior mammograms'', including 21 ROIs related to architectural distortion. From the corresponding set of 14 ''detection mammograms'', 398 ROIs were obtained, including 18 related to breast cancer. For each ROI, the fractal dimension and Haralick's texture features were computed. The fractal dimension of the ROIs was calculated using the circular average power spectrum technique. The average fractal dimension of the normal (false-positive) ROIs was significantly higher than that of the ROIs with architectural distortion (p = 0.006). For the ''prior mammograms'', the best receiver operating characteristics (ROC) performance achieved, in terms of the area under the ROC curve, was 0.80 with a Bayesian classifier using four features including fractal dimension, entropy, sum entropy, and inverse difference moment. Analysis of the performance of the methods with free-response receiver operating characteristics indicated a sensitivity of 0.79 at 8.4 false positives per image in the detection of sites of architectural distortion in the ''prior mammograms''. Fractal dimension offers a promising way to detect the presence of architectural distortion in prior mammograms. (orig.)

Structures and properties of spatially distorted porphyrins

International Nuclear Information System (INIS)

Golubchikov, Oleg A; Kuvshinova, Elizaveta M; Pukhovskaya, Svetlana G

2005-01-01

The published data on the structures and properties of porphyrins with distorted aromatic macrocycles are generalised and analysed. Data on the crystal structures, spectra and kinetics of formation and dissociation of their coordination derivatives are summarised. It is demonstrated that the distortion of the planar structure of the tetrapyrrole core is one of the most efficient means of controlling spectral, physicochemical and coordination properties of these compounds.

Detection of a novel, integrative aging process suggests complex physiological integration.

Science.gov (United States)

Cohen, Alan A; Milot, Emmanuel; Li, Qing; Bergeron, Patrick; Poirier, Roxane; Dusseault-Bélanger, Francis; Fülöp, Tamàs; Leroux, Maxime; Legault, Véronique; Metter, E Jeffrey; Fried, Linda P; Ferrucci, Luigi

2015-01-01

Many studies of aging examine biomarkers one at a time, but complex systems theory and network theory suggest that interpretations of individual markers may be context-dependent. Here, we attempted to detect underlying processes governing the levels of many biomarkers simultaneously by applying principal components analysis to 43 common clinical biomarkers measured longitudinally in 3694 humans from three longitudinal cohort studies on two continents (Women's Health and Aging I & II, InCHIANTI, and the Baltimore Longitudinal Study on Aging). The first axis was associated with anemia, inflammation, and low levels of calcium and albumin. The axis structure was precisely reproduced in all three populations and in all demographic sub-populations (by sex, race, etc.); we call the process represented by the axis "integrated albunemia." Integrated albunemia increases and accelerates with age in all populations, and predicts mortality and frailty--but not chronic disease--even after controlling for age. This suggests a role in the aging process, though causality is not yet clear. Integrated albunemia behaves more stably across populations than its component biomarkers, and thus appears to represent a higher-order physiological process emerging from the structure of underlying regulatory networks. If this is correct, detection of this process has substantial implications for physiological organization more generally.

Detection of a novel, integrative aging process suggests complex physiological integration.

Directory of Open Access Journals (Sweden)

Alan A Cohen

Full Text Available Many studies of aging examine biomarkers one at a time, but complex systems theory and network theory suggest that interpretations of individual markers may be context-dependent. Here, we attempted to detect underlying processes governing the levels of many biomarkers simultaneously by applying principal components analysis to 43 common clinical biomarkers measured longitudinally in 3694 humans from three longitudinal cohort studies on two continents (Women's Health and Aging I & II, InCHIANTI, and the Baltimore Longitudinal Study on Aging. The first axis was associated with anemia, inflammation, and low levels of calcium and albumin. The axis structure was precisely reproduced in all three populations and in all demographic sub-populations (by sex, race, etc.; we call the process represented by the axis "integrated albunemia." Integrated albunemia increases and accelerates with age in all populations, and predicts mortality and frailty--but not chronic disease--even after controlling for age. This suggests a role in the aging process, though causality is not yet clear. Integrated albunemia behaves more stably across populations than its component biomarkers, and thus appears to represent a higher-order physiological process emerging from the structure of underlying regulatory networks. If this is correct, detection of this process has substantial implications for physiological organization more generally.

Distorsioni strutturali della regolamentazione prudenziale delle banche (Structural distortions in prudential regulation of banks

Directory of Open Access Journals (Sweden)

Mario Tonveronachi

2002-03-01

Full Text Available At the national level, financial regulation based on prohibitions, the so-called structural rules, was accused of producing significant distortion. The degree of competition it was limited, encouraging inefficiencies of all types; the culture of risk it was weakened; wide discretionary powers were used by national authorities to distort market mechanisms and public ownership distorted competition and fostered cronyism.A new common regulative culture is therefore emerged, based on internal free competition within the banking sector and the financial system as a whole. It requires the elimination of strict limits to banking, the abandonment of the principle of specialization between commercial banking and financial asset bank, the affirmation of private property, the liability of the banks in a stronger market discipline, even with regard to their corporate governance.The Basel rules distorts no less serious than those attributed to the previous structural rules. Excessive competition is no less harmful than a low degree of competition, setting the “level playing field” helps large dimension and practicas “too big to fail”, the “capital crunches” produce serious effects on the economy, while the regulatory costs absorb important share resources of smaller banks. It is a matter of further research whether the new approach to regulation has also favored an increase in the share of national income absorbed by the financial system without having produced a better distribution of risk and a proportional increase in what James Tobin (1984 has defined efficiency of full insurance.

New Integrated Quality Function Deployment Approach Based on Interval Neutrosophic Set for Green Supplier Evaluation and Selection

Directory of Open Access Journals (Sweden)

Luu Huu Van

2018-03-01

Full Text Available Green supplier evaluation and selection plays a crucial role in the green supply chain management of any organization to reduce the purchasing cost of materials and increase the flexibility and quality of products. An interval neutrosophic set (INS—which is a generalization of fuzzy sets, intuitionistic fuzzy sets (IFS and neutrosophic sets (NS—can better handle the incomplete, indeterminate and inconsistent information than the other sets. This paper proposes a new integrated Quality Function Deployment (QFD in support of the green supplier evaluation and selection process. In the proposed approach, INS is used to assess the relative importance of the characteristics that the purchased product should have (internal variables “WHATs” in order to satisfy the company’s needs, the relevant supplier assessment criteria (external variables “HOWs”, the “HOWs”-“WHATs” correlation scores, the resulting weights of the “HOWs” and the impact of each potential supplier. The normalized weighted rating is then defined and the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS method is developed to obtain a final ranking of green suppliers. A case study is applied to demonstrate the efficiency and computational procedure of the proposed method.

Cognitive distortions and ADHD in pathological gambling: A national longitudinal case-control cohort study.

Science.gov (United States)

Romo, Lucia; Legauffre, Cindy; Guilleux, Alice; Valleur, Marc; Magalon, David; Fatséas, Mélina; Chéreau-Boudet, Isabelle; Luquiens, Amandine; Vénisse, Jean-Luc; Grall-Bronnec, Marie; Challet-Bouju, Gaëlle

2016-12-01

Introduction The primary outcome of our study was to assess the links between the level of cognitive distortions and the severity of gambling disorder. We also aimed at assessing the links between patient gambling trajectories and attention deficit and hyperactivity disorder (ADHD). Materials and methods The study population (n = 628) was comprised of problem and non-problem gamblers of both sexes between 18 and 65 years of age, who reported gambling on at least one occasion during the previous year. Data encompassed socio-demographic characteristics, gambling habits, the South Oaks Gambling Screen, the Gambling Attitudes and Beliefs Survey - 23, the Wender Utah Rating Scale - Child, and the Adult ADHD Self-report Scale. Results The cognitive distortions with the greatest correlation to the severity of gambling disorder were the "Chasing" and "Emotions." These two dimensions were able to distinguish between problem gamblers seeking treatment or not. While age of onset of gambling and length of gambling practice were not associated with the level of distorted cognitions, a period of abstinence of at least 1 month was associated with a lower level of distorted cognitions. The presence of ADHD resulted in a higher level of distorted cognitions. Conclusion Cognitive work is essential to the prevention, and the treatment, of pathological gambling, especially with respect to emotional biases and chasing behavior. The instauration of an abstinence period of at least 1 month under medical supervision could be a promising therapeutic lead for reducing gambling-related erroneous thoughts and for improving care strategies of pathological gamblers.

Dosimetric accuracy at low monitor unit setting in electron beams at different dose rates

International Nuclear Information System (INIS)

Ravikumar, M.; Ravichandran, R.; Supe, Sanjay S.; Sharma, Anil K.

1999-01-01

As electron beam with low monitor unit (LMU) settings are used in some dosimetric studies, better understanding of accuracy in dose delivery at LMU setting is necessary. The dose measurements were carried out with 0.6 cm 3 farmer type ion chamber at d max in a polystyrene phantom. Measurements at different MUs show that the dose linearity ratio (DLR) increases as the MU setting decreases below 20 MU and DLRs are found to increase when the incident electron beams have higher energies. The increase in DLR is minimum for low dose rate setting for all five electron beam energies (6, 9, 12, 16 and 20 MeV). As the variation in dose delivery is machine-specific, a detailed study should be conducted before the low MU setting is implemented. Since errors in dose delivery are high at higher dose rates, low dose rate may be better at low MU unit setting. (author)

Integration of oncology and palliative care: setting a benchmark.

Science.gov (United States)

Vayne-Bossert, P; Richard, E; Good, P; Sullivan, K; Hardy, J R

2017-10-01

Integration of oncology and palliative care (PC) should be the standard model of care for patients with advanced cancer. An expert panel developed criteria that constitute integration. This study determined whether the PC service within this Health Service, which is considered to be fully "integrated", could be benchmarked against these criteria. A survey was undertaken to determine the perceived level of integration of oncology and palliative care by all health care professionals (HCPs) within our cancer centre. An objective determination of integration was obtained from chart reviews of deceased patients. Integration was defined as >70% of all respondents answered "agree" or "strongly agree" to each indicator and >70% of patient charts supported each criteria. Thirty-four HCPs participated in the survey (response rate 69%). Over 90% were aware of the outpatient PC clinic, interdisciplinary and consultation team, PC senior leadership, and the acceptance of concurrent anticancer therapy. None of the other criteria met the 70% agreement mark but many respondents lacked the necessary knowledge to respond. The chart review included 67 patients, 92% of whom were seen by the PC team prior to death. The median time from referral to death was 103 days (range 0-1347). The level of agreement across all criteria was below our predefined definition of integration. The integration criteria relating to service delivery are medically focused and do not lend themselves to interdisciplinary review. The objective criteria can be audited and serve both as a benchmark and a basis for improvement activities.

Effects Of Field Distortions In Ih-apf Linac

CERN Document Server

Kapin, Valery; Yamada, S

2004-01-01

The project on developing compact medical accelera-tors for the tumor therapy using carbon ions has been started at the National Institute of Radiological Sciences (NIRS). Alternating-phase-focused (APF) linac using an interdigital H-mode (IH) cavity has been proposed for the injector linac. The IH-cavity is doubly ridged circular resonator loaded by the drift-tubes mounted on ridges with supporting stems. The effects of intrinsic and random field distortions in a practical design of the 4-MeV/u 200 MHz IH-APF linac are considered. The intrinsic field distortions in IH-cavity are caused by the asymmetry of the gap field due to presence of the drift-tube supporting stems and pair of ridges. The random field distortions are caused by drift-tube misalignments and non-regular deviations of the voltage distribution from programmed law. The RF fields in IH-cavity have been calculated using Microwave Studio (MWS) code. The effects of field distortions on beam dynamics have been simulated numerically.

Expertise and processing distorted structure in chess.

Science.gov (United States)

Bartlett, James C; Boggan, Amy L; Krawczyk, Daniel C

2013-01-01

A classic finding in research on human expertise and knowledge is that of enhanced memory for stimuli in a domain of expertise as compared to either stimuli outside that domain, or within-domain stimuli that have been degraded or distorted in some way. However, we do not understand how experts process degradation or distortion of stimuli within the expert domain (e.g., a face with the eyes, nose, and mouth in the wrong positions, or a chessboard with pieces placed randomly). Focusing on the domain of chess, we present new fMRI evidence that when experts view such distorted/within-domain stimuli, they engage an active search for structure-a kind of exploratory chunking-that involves a component of a prefrontal-parietal network linked to consciousness, attention and working memory.

Could unstable relic particles distort the microwave background radiation?

International Nuclear Information System (INIS)

Dar, A.; Loeb, A.; Nussinov, S.

1989-01-01

Three general classes of possible scenarios for the recently reported distortion of the microwave background radiation (MBR) via decaying relic weakly interacting particles are analyzed. The analysis shows that such particles could not reheat the universe and cause the spectral distortion of the MBR. Gravitational processes such as the early formation of massive black holes may still be plausible energy sources for producing the reported spectral distortion of the MBR at an early cosmological epoch. 24 references

An integrated methods study of the experiences of youth with severe disabilities in leisure activity settings: the importance of belonging, fun, and control and choice.

Science.gov (United States)

King, Gillian; Gibson, Barbara E; Mistry, Bhavnita; Pinto, Madhu; Goh, Freda; Teachman, Gail; Thompson, Laura

2014-01-01

The aim was to examine the leisure activity setting experiences of two groups of youth with severe disabilities - those with complex continuing care (CCC) needs and those who have little functional speech and communicate using augmentative and alternative communication (AAC). Twelve youth took part in a mixed methods study, in which their experiences were ascertained using qualitative methods (observations, photo elicitation and interviews) and the measure of Self-Reported Experiences of Activity Settings (SEAS). Data integration occurred using a "following a thread" technique and case-by-case analysis. The analysis revealed several highly valued aspects of leisure activity setting experiences for youth, including engagement with others, enjoying the moment, and control and choice in selection and participation in activity settings. The findings provide preliminary insights into the nature of optimal activity settings for youth with severe disabilities, and the mediators of these experiences. Compared to other youth, the data illustrate both the commonalities of experiences and differences in the ways in which these experiences are attained. Implications for research concern the utility of mixed methods approaches in understanding the complex nature of participation experiences. Implications for clinical practice concern the importance of not assuming the nature of youths' experiences.

Proteomic analysis of the dysferlin protein complex unveils its importance for sarcolemmal maintenance and integrity.

Directory of Open Access Journals (Sweden)

Antoine de Morrée

Full Text Available Dysferlin is critical for repair of muscle membranes after damage. Mutations in dysferlin lead to a progressive muscular dystrophy. Recent studies suggest additional roles for dysferlin. We set out to study dysferlin's protein-protein interactions to obtain comprehensive knowledge of dysferlin functionalities in a myogenic context. We developed a robust and reproducible method to isolate dysferlin protein complexes from cells and tissue. We analyzed the composition of these complexes in cultured myoblasts, myotubes and skeletal muscle tissue by mass spectrometry and subsequently inferred potential protein functions through bioinformatics analyses. Our data confirm previously reported interactions and support a function for dysferlin as a vesicle trafficking protein. In addition novel potential functionalities were uncovered, including phagocytosis and focal adhesion. Our data reveal that the dysferlin protein complex has a dynamic composition as a function of myogenic differentiation. We provide additional experimental evidence and show dysferlin localization to, and interaction with the focal adhesion protein vinculin at the sarcolemma. Finally, our studies reveal evidence for cross-talk between dysferlin and its protein family member myoferlin. Together our analyses show that dysferlin is not only a membrane repair protein but also important for muscle membrane maintenance and integrity.

How coping styles, cognitive distortions, and attachment predict problem gambling among adolescents and young adults.

Science.gov (United States)

Calado, Filipa; Alexandre, Joana; Griffiths, Mark D

2017-12-01

Background and aims Recent research suggests that youth problem gambling is associated with several factors, but little is known how these factors might influence or interact each other in predicting this behavior. Consequently, this is the first study to examine the mediation effect of coping styles in the relationship between attachment to parental figures and problem gambling. Methods A total of 988 adolescents and emerging adults were recruited to participate. The first set of analyses tested the adequacy of a model comprising biological, cognitive, and family variables in predicting youth problem gambling. The second set of analyses explored the relationship between family and individual variables in problem gambling behavior. Results The results of the first set of analyses demonstrated that the individual factors of gender, cognitive distortions, and coping styles showed a significant predictive effect on youth problematic gambling, and the family factors of attachment and family structure did not reveal a significant influence on this behavior. The results of the second set of analyses demonstrated that the attachment dimension of angry distress exerted a more indirect influence on problematic gambling, through emotion-focused coping style. Discussion This study revealed that some family variables can have a more indirect effect on youth gambling behavior and provided some insights in how some factors interact in predicting problem gambling. Conclusion These findings suggest that youth gambling is a multifaceted phenomenon, and that the indirect effects of family variables are important in estimating the complex social forces that might influence adolescent decisions to gamble.

On the benefits of an integrated nuclear complex for Nevada

International Nuclear Information System (INIS)

Blink, J.A.; Halsey, W.G.

1994-01-01

An integrated nuclear complex is proposed for location at the Nevada Test Site. In addition to solving the nuclear waste disposal problem, this complex would tremendously enhance the southern Nevada economy, and it would provide low cost electricity to each resident and business in the affected counties. Nuclear industry and the national economy would benefit because the complex would demonstrate the new generation of safer nuclear power plants and revitalize the industry. Many spin-offs of the complex would be possible, including research into nuclear fusion and a world class medical facility for southern Nevada. For such a complex to become a reality, the cycle of distrust between the federal government and the State of Nevada must be broken. The paper concludes with a discussion of implementation through a public process led by state officials and culminating in a voter referendum

Implementing trials of complex interventions in community settings: the USC-Rancho Los Amigos pressure ulcer prevention study (PUPS).

Science.gov (United States)

Clark, Florence; Pyatak, Elizabeth A; Carlson, Mike; Blanche, Erna Imperatore; Vigen, Cheryl; Hay, Joel; Mallinson, Trudy; Blanchard, Jeanine; Unger, Jennifer B; Garber, Susan L; Diaz, Jesus; Florindez, Lucia I; Atkins, Michal; Rubayi, Salah; Azen, Stanley Paul

2014-04-01

Randomized trials of complex, non-pharmacologic interventions implemented in home and community settings, such as the University of Southern California (USC)-Rancho Los Amigos National Rehabilitation Center (RLANRC) Pressure Ulcer Prevention Study (PUPS), present unique challenges with respect to (1) participant recruitment and retention, (2) intervention delivery and fidelity, (3) randomization and assessment, and (4) potential inadvertent treatment effects. We describe the methods employed to address the challenges confronted in implementing PUPS. In this randomized controlled trial, we are assessing the efficacy of a complex, preventive intervention in reducing the incidence of, and costs associated with, the development of medically serious pressure ulcers in people with spinal cord injury. Individuals with spinal cord injury recruited from RLANRC were assigned to either a 12-month preventive intervention group or a standard care control group. The primary outcome is the incidence of serious pressure ulcers with secondary endpoints including ulcer-related surgeries, medical treatment costs, and quality of life. These outcomes are assessed at 12 and 24 months after randomization. Additionally, we are studying the mediating mechanisms that account for intervention outcomes. PUPS has been successfully implemented, including recruitment of the target sample size of 170 participants, assurance of the integrity of intervention protocol delivery with an average 90% treatment adherence rate, and enactment of the assessment plan. However, implementation has been replete with challenges. To meet recruitment goals, we instituted a five-pronged approach customized for an underserved, ethnically diverse population. In intervention delivery, we increased staff time to overcome economic and cultural barriers to retention and adherence. To ensure treatment fidelity and replicability, we monitored intervention protocol delivery in accordance with a rigorous plan. Finally, we

Distorted secretory granule composition in mast cells with multiple protease deficiency.

Science.gov (United States)

Grujic, Mirjana; Calounova, Gabriela; Eriksson, Inger; Feyerabend, Thorsten; Rodewald, Hans-Reimer; Tchougounova, Elena; Kjellén, Lena; Pejler, Gunnar

2013-10-01

Mast cells are characterized by an abundance of secretory granules densely packed with inflammatory mediators such as bioactive amines, cytokines, serglycin proteoglycans with negatively charged glycosaminoglycan side chains of either heparin or chondroitin sulfate type, and large amounts of positively charged proteases. Despite the large biological impact of mast cell granules and their contents on various pathologies, the mechanisms that regulate granule composition are incompletely understood. In this study, we hypothesized that granule composition is dependent on a dynamic electrostatic interrelationship between different granule compounds. As a tool to evaluate this possibility, we generated mice in which mast cells are multideficient in a panel of positively charged proteases: the chymase mouse mast cell protease-4, the tryptase mouse mast cell protease-6, and carboxypeptidase A3. Through a posttranslational effect, mast cells from these mice additionally lack mouse mast cell protease-5 protein. Mast cells from mice deficient in individual proteases showed normal morphology. In contrast, mast cells with combined protease deficiency displayed a profound distortion of granule integrity, as seen both by conventional morphological criteria and by transmission electron microscopy. An assessment of granule content revealed that the distorted granule integrity in multiprotease-deficient mast cells was associated with a profound reduction of highly negatively charged heparin, whereas no reduction in chondroitin sulfate storage was observed. Taken together with previous findings showing that the storage of basic proteases conversely is regulated by anionic proteoglycans, these data suggest that secretory granule composition in mast cells is dependent on a dynamic interrelationship between granule compounds of opposite electrical charge.

Anisotropic extinction distortion of the galaxy correlation function

International Nuclear Information System (INIS)

Fang Wenjuan; Hui Lam; Menard, Brice; May, Morgan; Scranton, Ryan

2011-01-01

Similar to the magnification of the galaxies' fluxes by gravitational lensing, the extinction of the fluxes by comic dust, whose existence is recently detected by [B. Menard, R. Scranton, M. Fukugita, and G. Richards, Mon. Not. R. Astron. Soc. 405, 1025 (2010).], also modifies the distribution of a flux-selected galaxy sample. We study the anisotropic distortion by dust extinction to the 3D galaxy correlation function, including magnification bias and redshift distortion at the same time. We find the extinction distortion is most significant along the line of sight and at large separations, similar to that by magnification bias. The correction from dust extinction is negative except at sufficiently large transverse separations, which is almost always opposite to that from magnification bias (we consider a number count slope s>0.4). Hence, the distortions from these two effects tend to reduce each other. At low z (< or approx. 1), the distortion by extinction is stronger than that by magnification bias, but at high z, the reverse holds. We also study how dust extinction affects probes in real space of the baryon acoustic oscillations (BAO) and the linear redshift distortion parameter β. We find its effect on BAO is negligible. However, it introduces a positive scale-dependent correction to β that can be as large as a few percent. At the same time, we also find a negative scale-dependent correction from magnification bias, which is up to percent level at low z, but to ∼40% at high z. These corrections are non-negligible for precision cosmology, and should be considered when testing General Relativity through the scale-dependence of β.

Energy and carbon emissions analysis and prediction of complex petrochemical systems based on an improved extreme learning machine integrated interpretative structural model

International Nuclear Information System (INIS)

Han, Yongming; Zhu, Qunxiong; Geng, Zhiqiang; Xu, Yuan

2017-01-01

Highlights: • The ELM integrated ISM (ISM-ELM) method is proposed. • The proposed method is more efficient and accurate than the ELM through the UCI data set. • Energy and carbon emissions analysis and prediction of petrochemical industries based ISM-ELM is obtained. • The proposed method is valid in improving energy efficiency and reducing carbon emissions of ethylene plants. - Abstract: Energy saving and carbon emissions reduction of the petrochemical industry are affected by many factors. Thus, it is difficult to analyze and optimize the energy of complex petrochemical systems accurately. This paper proposes an energy and carbon emissions analysis and prediction approach based on an improved extreme learning machine (ELM) integrated interpretative structural model (ISM) (ISM-ELM). ISM based the partial correlation coefficient is utilized to analyze key parameters that affect the energy and carbon emissions of the complex petrochemical system, and can denoise and reduce dimensions of data to decrease the training time and errors of the ELM prediction model. Meanwhile, in terms of the model accuracy and the training time, the robustness and effectiveness of the ISM-ELM model are better than the ELM through standard data sets from the University of California Irvine (UCI) repository. Moreover, a multi-inputs and single-output (MISO) model of energy and carbon emissions of complex ethylene systems is established based on the ISM-ELM. Finally, detailed analyses and simulations using the real ethylene plant data demonstrate the effectiveness of the ISM-ELM and can guide the improvement direction of energy saving and carbon emissions reduction in complex petrochemical systems.

Characterization, prediction, and correction of geometric distortion in 3 T MR images

International Nuclear Information System (INIS)

Baldwin, Lesley N.; Wachowicz, Keith; Thomas, Steven D.; Rivest, Ryan; Gino Fallone, B.

2007-01-01

The work presented herein describes our methods and results for predicting, measuring and correcting geometric distortions in a 3 T clinical magnetic resonance (MR) scanner for the purpose of image guidance in radiation treatment planning. Geometric inaccuracies due to both inhomogeneities in the background field and nonlinearities in the applied gradients were easily visualized on the MR images of a regularly structured three-dimensional (3D) grid phantom. From a computed tomography scan, the locations of just under 10 000 control points within the phantom were accurately determined in three dimensions using a MATLAB-based computer program. MR distortion was then determined by measuring the corresponding locations of the control points when the phantom was imaged using the MR scanner. Using a reversed gradient method, distortions due to gradient nonlinearities were separated from distortions due to inhomogeneities in the background B 0 field. Because the various sources of machine-related distortions can be individually characterized, distortions present in other imaging sequences (for which 3D distortion cannot accurately be measured using phantom methods) can be predicted negating the need for individual distortion calculation for a variety of other imaging sequences. Distortions were found to be primarily caused by gradient nonlinearities and maximum image distortions were reported to be less than those previously found by other researchers at 1.5 T. Finally, the image slices were corrected for distortion in order to provide geometrically accurate phantom images

Research and implementation of the algorithm for unwrapped and distortion correction basing on CORDIC for panoramic image

Science.gov (United States)

Zhang, Zhenhai; Li, Kejie; Wu, Xiaobing; Zhang, Shujiang

2008-03-01

The unwrapped and correcting algorithm based on Coordinate Rotation Digital Computer (CORDIC) and bilinear interpolation algorithm was presented in this paper, with the purpose of processing dynamic panoramic annular image. An original annular panoramic image captured by panoramic annular lens (PAL) can be unwrapped and corrected to conventional rectangular image without distortion, which is much more coincident with people's vision. The algorithm for panoramic image processing is modeled by VHDL and implemented in FPGA. The experimental results show that the proposed panoramic image algorithm for unwrapped and distortion correction has the lower computation complexity and the architecture for dynamic panoramic image processing has lower hardware cost and power consumption. And the proposed algorithm is valid.

Data-Filtering System to Avoid Total Data Distortion in IoT Networking

Directory of Open Access Journals (Sweden)

Dae-Young Kim

2017-01-01

Full Text Available In the Internet of Things (IoT networking, numerous objects are connected to a network. They sense events and deliver the sensed information to the cloud. A lot of data is generated in the IoT network, and servers in the cloud gather the sensed data from the objects. Then, the servers analyze the collected data and provide proper intelligent services to users through the results of the analysis. When the server analyzes the collected data, if there exists malfunctioning data, distortional results of the analysis will be generated. The distortional results lead to misdirection of the intelligent services, leading to poor user experience. In the analysis for intelligent services in IoT, malfunctioning data should be avoided because integrity of the collected data is crucial. Therefore, this paper proposes a data-filtering system for the server in the cloud. The proposed data-filtering system is placed in front of the server and firstly receives the sensed data from the objects. It employs the naïve Bayesian classifier and, by learning, classifies the malfunctioning data from among the collected data. Data with integrity is delivered to the server for analysis. Because the proposed system filters the malfunctioning data, the server can obtain accurate analysis results and reduce computing load. The performance of the proposed data-filtering system is evaluated through computer simulation. Through the simulation results, the efficiency of the proposed data-filtering system is shown.

Carrier Distortion in Hysteretic Self-Oscillating Class-D Audio Power

DEFF Research Database (Denmark)

Høyerby, Mikkel Christian Kofod; Andersen, Michael A. E.

2009-01-01

An important distortion mechanism in hysteretic self-oscillating (SO) class-D (switch mode) power amplifiers-–carrier distortion-–is analyzed and an optimization method is proposed. This mechanism is an issue in any power amplifier application where a high degree of proportionality between input...... and output is required, such as in audio power amplifiers or xDSL drivers. From an average-mode point of view, carrier distortion is shown to be caused by nonlinear variation of the hysteretic comparator input average voltage with the output average voltage. This easily causes total harmonic distortion...... figures in excess of 0.1–0.2%, inadequate for high-quality audio applications. Carrier distortion is shown to be minimized when the feedback system is designed to provide a triangular carrier (sliding) signal at the input of a hysteretic comparator. The proposed optimization method is experimentally...

Integrating genome-wide association study and expression quantitative trait loci data identifies multiple genes and gene set associated with neuroticism.

Science.gov (United States)

Fan, Qianrui; Wang, Wenyu; Hao, Jingcan; He, Awen; Wen, Yan; Guo, Xiong; Wu, Cuiyan; Ning, Yujie; Wang, Xi; Wang, Sen; Zhang, Feng

2017-08-01

Neuroticism is a fundamental personality trait with significant genetic determinant. To identify novel susceptibility genes for neuroticism, we conducted an integrative analysis of genomic and transcriptomic data of genome wide association study (GWAS) and expression quantitative trait locus (eQTL) study. GWAS summary data was driven from published studies of neuroticism, totally involving 170,906 subjects. eQTL dataset containing 927,753 eQTLs were obtained from an eQTL meta-analysis of 5311 samples. Integrative analysis of GWAS and eQTL data was conducted by summary data-based Mendelian randomization (SMR) analysis software. To identify neuroticism associated gene sets, the SMR analysis results were further subjected to gene set enrichment analysis (GSEA). The gene set annotation dataset (containing 13,311 annotated gene sets) of GSEA Molecular Signatures Database was used. SMR single gene analysis identified 6 significant genes for neuroticism, including MSRA (p value=2.27×10 -10 ), MGC57346 (p value=6.92×10 -7 ), BLK (p value=1.01×10 -6 ), XKR6 (p value=1.11×10 -6 ), C17ORF69 (p value=1.12×10 -6 ) and KIAA1267 (p value=4.00×10 -6 ). Gene set enrichment analysis observed significant association for Chr8p23 gene set (false discovery rate=0.033). Our results provide novel clues for the genetic mechanism studies of neuroticism. Copyright © 2017. Published by Elsevier Inc.

76 FR 50726 - Integrated System Power Rates: Correction

Science.gov (United States)

2011-08-16

... DEPARTMENT OF ENERGY Southwestern Power Administration Integrated System Power Rates: Correction AGENCY: Southwestern Power Administration, DOE. ACTION: Notice of public review and comment; Correction... date listed for the combined Public Information and Comment Forum (Forum) was erroneously listed in the...

Constructions of contents and measures satisfying a prescribed set of integral inequalities

DEFF Research Database (Denmark)

Hoffmann-Jørgensen, Jørgen

2006-01-01

Let Ψ be a given set real-valued functions on the set T and β:Ψ→R be a given functional with values in the extended real line. The paper gives sufficent conditions for the exists of a content (or a measure) μ with good regularity and smoothnes properties and with the property that β(ψ) is less than...... the outer μ-integral of ψ for all ψ in Ψ....

Tailoring Healthy Workplace Interventions to Local Healthcare Settings: A Complexity Theory-Informed Workplace of Well-Being Framework.

Science.gov (United States)

Brand, Sarah L; Fleming, Lora E; Wyatt, Katrina M

2015-01-01

Many healthy workplace interventions have been developed for healthcare settings to address the consistently low scores of healthcare professionals on assessments of mental and physical well-being. Complex healthcare settings present challenges for the scale-up and spread of successful interventions from one setting to another. Despite general agreement regarding the importance of the local setting in affecting intervention success across different settings, there is no consensus on what it is about a local setting that needs to be taken into account to design healthy workplace interventions appropriate for different local settings. Complexity theory principles were used to understand a workplace as a complex adaptive system and to create a framework of eight domains (system characteristics) that affect the emergence of system-level behaviour. This Workplace of Well-being (WoW) framework is responsive and adaptive to local settings and allows a shared understanding of the enablers and barriers to behaviour change by capturing local information for each of the eight domains. We use the results of applying the WoW framework to one workplace, a UK National Health Service ward, to describe the utility of this approach in informing design of setting-appropriate healthy workplace interventions that create workplaces conducive to healthy behaviour change.

Tailoring Healthy Workplace Interventions to Local Healthcare Settings: A Complexity Theory-Informed Workplace of Well-Being Framework

Directory of Open Access Journals (Sweden)

Sarah L. Brand

2015-01-01

Full Text Available Many healthy workplace interventions have been developed for healthcare settings to address the consistently low scores of healthcare professionals on assessments of mental and physical well-being. Complex healthcare settings present challenges for the scale-up and spread of successful interventions from one setting to another. Despite general agreement regarding the importance of the local setting in affecting intervention success across different settings, there is no consensus on what it is about a local setting that needs to be taken into account to design healthy workplace interventions appropriate for different local settings. Complexity theory principles were used to understand a workplace as a complex adaptive system and to create a framework of eight domains (system characteristics that affect the emergence of system-level behaviour. This Workplace of Well-being (WoW framework is responsive and adaptive to local settings and allows a shared understanding of the enablers and barriers to behaviour change by capturing local information for each of the eight domains. We use the results of applying the WoW framework to one workplace, a UK National Health Service ward, to describe the utility of this approach in informing design of setting-appropriate healthy workplace interventions that create workplaces conducive to healthy behaviour change.

Tailoring Healthy Workplace Interventions to Local Healthcare Settings: A Complexity Theory-Informed Workplace of Well-Being Framework

Science.gov (United States)

Brand, Sarah L.; Fleming, Lora E.; Wyatt, Katrina M.

2015-01-01

Many healthy workplace interventions have been developed for healthcare settings to address the consistently low scores of healthcare professionals on assessments of mental and physical well-being. Complex healthcare settings present challenges for the scale-up and spread of successful interventions from one setting to another. Despite general agreement regarding the importance of the local setting in affecting intervention success across different settings, there is no consensus on what it is about a local setting that needs to be taken into account to design healthy workplace interventions appropriate for different local settings. Complexity theory principles were used to understand a workplace as a complex adaptive system and to create a framework of eight domains (system characteristics) that affect the emergence of system-level behaviour. This Workplace of Well-being (WoW) framework is responsive and adaptive to local settings and allows a shared understanding of the enablers and barriers to behaviour change by capturing local information for each of the eight domains. We use the results of applying the WoW framework to one workplace, a UK National Health Service ward, to describe the utility of this approach in informing design of setting-appropriate healthy workplace interventions that create workplaces conducive to healthy behaviour change. PMID:26380358

Market distortions and aggregate productivity: Evidence from Chinese energy enterprises

International Nuclear Information System (INIS)

Dai, Xiaoyong; Cheng, Liwei

2016-01-01

Market distortions can generate resource misallocations across heterogeneous firms and reduce aggregate productivity. This paper measures market distortions and aggregate productivity growth in China's energy sector. We use the wedge between output elasticities and factor shares in revenues to recover a measure of firm-level market distortions. Using data on a large sample of Chinese energy enterprises from 1999 to 2007, our estimations provide strong evidence of the existence of both factor and product market distortions within and across China's various energy industries. The productivity aggregation and decomposition results demonstrate that the estimated aggregate productivity growth (APG) is, on average, 2.595% points per year, of which technological change, resource reallocation, and firm entries and exits account for 1.981, 0.068, and 0.546% points, respectively. The weak contributions of resource reallocation and firm turnover to APG are also found in energy sub-industries, except in the coal industry. Our research suggests that China's energy sector has major potential for productivity gains from resource reallocation through the reduction of market distortions. - Highlights: •We estimate market distortions and productivity growth of China's energy sector. •We use a large sample of Chinese energy enterprises. •There are evidences of the existence of factor and product market distortions. •Aggregate productivity growth is largely driven by firm-level technological change. •China's energy sector can realize productivity gains from resource reallocations.

Forensic image analysis - CCTV distortion and artefacts.

Science.gov (United States)

Seckiner, Dilan; Mallett, Xanthé; Roux, Claude; Meuwly, Didier; Maynard, Philip

2018-04-01

As a result of the worldwide deployment of surveillance cameras, authorities have gained a powerful tool that captures footage of activities of people in public areas. Surveillance cameras allow continuous monitoring of the area and allow footage to be obtained for later use, if a criminal or other act of interest occurs. Following this, a forensic practitioner, or expert witness can be required to analyse the footage of the Person of Interest. The examination ultimately aims at evaluating the strength of evidence at source and activity levels. In this paper, both source and activity levels are inferred from the trace, obtained in the form of CCTV footage. The source level alludes to features observed within the anatomy and gait of an individual, whilst the activity level relates to activity undertaken by the individual within the footage. The strength of evidence depends on the value of the information recorded, where the activity level is robust, yet source level requires further development. It is therefore suggested that the camera and the associated distortions should be assessed first and foremost and, where possible, quantified, to determine the level of each type of distortion present within the footage. A review of the 'forensic image analysis' review is presented here. It will outline the image distortion types and detail the limitations of differing surveillance camera systems. The aim is to highlight various types of distortion present particularly from surveillance footage, as well as address gaps in current literature in relation to assessment of CCTV distortions in tandem with gait analysis. Future work will consider the anatomical assessment from surveillance footage. Copyright © 2018 Elsevier B.V. All rights reserved.

Improved low-distortion sigma-delta ADC with DWA for WLAN standards

Energy Technology Data Exchange (ETDEWEB)

Li Di; Yang Yintang; Zhu Zhangming; Shi Lichun; Wu Xiaofeng; Wang Jiangan, E-mail: lidi2004@126.co [School of Microelectronics, Xidian University, Xi' an 710071 (China)

2010-02-15

An improved low distortion sigma-delta ADC (analog-to-digital converter) for wireless local area network standards is presented. A feed-forward MASH 2-2 multi-bit cascaded sigma-delta ADC is adopted; however, this work shows a much better performance than the ADCs which have been presented to date by adding a feedback factor in the second stage to improve the performance of the in-band SNDR (signal to noise and distortion ratio), using 4-bit ADCs in both stages to minimize the quantization noise. Data weighted averaging technology is therefore used to decrease the mismatch noise induced by the 4-bit DACs, which improves the SFDR (spurious free dynamic range) of the ADC. The modulator has been implemented by a 0.18 {mu}m CMOS process and operates at a single 1.8 V supply voltage. Experimental results show that for a 1.25 MHz - -6 dBFS input signal at 160 MHz sampling frequency, the improved ADC with all non-idealities considered achieves a peak SNDR of 80.9 dB and an SFDR of 87 dB, and the effective number of bits is 13.15 bits. (semiconductor integrated circuits)

Compact beam splitters with deep gratings for miniature photonic integrated circuits: design and implementation aspects.

Science.gov (United States)

Chen, Chin-Hui; Klamkin, Jonathan; Nicholes, Steven C; Johansson, Leif A; Bowers, John E; Coldren, Larry A

2009-09-01

We present an extensive study of an ultracompact grating-based beam splitter suitable for photonic integrated circuits (PICs) that have stringent density requirements. The 10 microm long beam splitter exhibits equal splitting, low insertion loss, and also provides a high extinction ratio in an integrated coherent balanced receiver. We further present the design strategies for avoiding mode distortion in the beam splitter and discuss optimization of the widths of the detectors to improve insertion loss and extinction ratio of the coherent receiver circuit. In our study, we show that the grating-based beam splitter is a competitive technology having low fabrication complexity for ultracompact PICs.

Helical Peierls distortion: Formation of helices of polyketone and polyisocyanide

Science.gov (United States)

Cui, Chang-Xing; Kertesz, Miklos

1990-06-01

A new type of Peierls-like distortion, the formation of a helix due to the existence of partially filled crossing bands, is reported for polyketone and polyisocyanide. The torsional potential curves, optimized geometries, band structures and phonon dispersion curves are derived. A comparison with the well-known Peierls-distorted all-trans polyacetylene indicates close similarity between the two types of Peierls distortions.

Adaptive Fault Detection for Complex Dynamic Processes Based on JIT Updated Data Set

Directory of Open Access Journals (Sweden)

Jinna Li

2012-01-01

Full Text Available A novel fault detection technique is proposed to explicitly account for the nonlinear, dynamic, and multimodal problems existed in the practical and complex dynamic processes. Just-in-time (JIT detection method and k-nearest neighbor (KNN rule-based statistical process control (SPC approach are integrated to construct a flexible and adaptive detection scheme for the control process with nonlinear, dynamic, and multimodal cases. Mahalanobis distance, representing the correlation among samples, is used to simplify and update the raw data set, which is the first merit in this paper. Based on it, the control limit is computed in terms of both KNN rule and SPC method, such that we can identify whether the current data is normal or not by online approach. Noted that the control limit obtained changes with updating database such that an adaptive fault detection technique that can effectively eliminate the impact of data drift and shift on the performance of detection process is obtained, which is the second merit in this paper. The efficiency of the developed method is demonstrated by the numerical examples and an industrial case.

Maximising the recovery of low grade heat: An integrated heat integration framework incorporating heat pump intervention for simple and complex factories

International Nuclear Information System (INIS)

Miah, J.H.; Griffiths, A.; McNeill, R.; Poonaji, I.; Martin, R.; Leiser, A.; Morse, S.; Yang, A.; Sadhukhan, J.

2015-01-01

Highlights: • A new practical heat integration framework incorporating heat pump technology for simple and complex food factories. • A decision making procedure was proposed to select process or utility heat integration in complex and diverse factories. • New stream classifications proposed to identify and compare streams linked between process and utility, especially waste heat. • A range of ‘Heat Pump Thresholds’ to identify and compare heat pump configurations with steam generation combustion boiler. - Abstract: The recovery of heat has long been a key measure to improving energy efficiency and maximising the heat recovery of factories by Pinch analysis. However, a substantial amount of research has been dedicated to conventional heat integration where low grade heat is often ignored. Despite this, the sustainability challenges facing the process manufacturing community are turning interest on low grade energy recovery systems to further advance energy efficiency by technological interventions such as heat pumps. This paper presents a novel heat integration framework incorporating technological interventions for both simple and complex factories to evaluate all possible heat integration opportunities including low grade and waste heat. The key features of the framework include the role of heat pumps to upgrade heat which can significantly enhance energy efficiency; the selection process of heat pump designs which was aided by the development of ‘Heat Pump Thresholds’ to decide if heat pump designs are cost-competitive with steam generation combustion boiler; a decision making procedure to select process or utility heat integration in complex and diverse factories; and additional stream classifications to identify and separate streams that can be practically integrated. The application of the framework at a modified confectionery factory has yielded four options capable of delivering a total energy reduction of about 32% with an economic payback

Integrated Data Collection Analysis (IDCA) Program - RDX Standard Data Set 2

Energy Technology Data Exchange (ETDEWEB)

Sandstrom, Mary M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Brown, Geoffrey W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Preston, Daniel N. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Pollard, Colin J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Warner, Kirstin F. [Naval Surface Warfare Center (NSWC), Indian Head, MD (United States). Indian Head Division; Sorensen, Daniel N. [Naval Surface Warfare Center (NSWC), Indian Head, MD (United States). Indian Head Division; Remmers, Daniel L. [Naval Surface Warfare Center (NSWC), Indian Head, MD (United States). Indian Head Division; Phillips, Jason J. [Air Force Research Lab. (AFRL), Tyndall Air Force Base, FL (United States); Shelley, Timothy J. [Applied Research Associates, Tyndall Air Force Base, FL (United States); Reyes, Jose A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hsu, Peter C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Reynolds, John G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2013-02-20

The Integrated Data Collection Analysis (IDCA) program is conducting a proficiency study for Small- Scale Safety and Thermal (SSST) testing of homemade explosives (HMEs). Described here are the results for impact, friction, electrostatic discharge, and differential scanning calorimetry analysis of the RDX Type II Class 5 standard, from testing the second time in the Proficiency Test. This RDX testing (Set 2) compared to the first (Set 1) was found to have about the same impact sensitivity, have more BAM friction sensitivity, less ABL friction sensitivity, similar ESD sensitivity, and same DSC sensitivity.

Perovskite LaPbMSbO6 (M=Co, Ni): Structural distortion, magnetic and dielectric properties

International Nuclear Information System (INIS)

Bai, Yijia; Han, Lin; Liu, Xiaojuan; Deng, Xiaolong; Wu, Xiaojie; Yao, Chuangang; Liang, Qingshuang; Meng, Junling; Meng, Jian

2014-01-01

The B-site ordered double perovskite oxides LaPbMSbO 6 (M=Co, Ni) have been synthesized via the modified Sol–Gel precursor two-step route. Rietveld refinements reveal strong abnormal structural distortion and BO 6 octahedral deformation appearing along the ab plane. Owing to the cooperative Jahn–Teller effect of Co 2+ and Pb 2+ ions, the Co-related compound exhibits almost complete Co 2+ –Sb 5+ order. For magnetic properties, spin-canted antiferromagnetic state with high extent of magnetic frustration is confirmed. The Ni-related compound presents heavier magnetic frustration for introducing tiny disorder on site occupation accompanied with valence state and further enhancing the complexity of magnetic competition. Dielectric measurements present a considerable temperature dependent dielectric relaxation with great dc-like loss feature in the LaPbCoSbO 6 . For LaPbNiSbO 6 , however, the permittivity with low dielectric loss is shown to be insensitive to either temperature or frequency. The corresponding electronic active energy manifests that the weakly bounded 3d-electron is prone to hop in a more distorted Co–Sb sublattice. - Graphical abstract: XRD Rietveld refinement result of LaPbCoSbO 6 presented a large BO 6 octahedral distortion along the ab plane. Based upon the variations from Co–O–Sb bond angles, a fierce competition from many extended magnetic coupling routes (M–O–O–M) would induce a considerably large magnetic frustration and electron hopping restriction. - Highlights: • Highly ordered LaPbMSbO 6 (M=Co, Ni) were synthesized. • Abnormal structural distortion appeared in the ab plane. • Strong magnetic frustration was confirmed via M 2+ –O–O–M 2+ route. • Dielectric measurements presented a large difference between Co and Ni samples. • 3d-electronic structure determines lattice distortion and physical properties

Shape distortion and dimensional precision in tungsten heavy alloy liquid phase sintering

International Nuclear Information System (INIS)

Wuwen Yi; German, R.M.; Lu, P.K.

2001-01-01

Microstructure effects on densification and shape distortion in liquid phase sintering of tungsten heavy alloy were investigated. Microstructure parameters such as the solid volume fraction, dihedral angle, initial porosity, and pore size were varied to measure densification and distortion behavior during LPS using W-Ni-Cu alloys. Green compacts were formed using ethylene-bis-stearamide as a pore-forming agent with the amount of polymer controlling the initial porosity. Different initial pore sizes were generated by varying the polymer particle size. Dihedral angle was varied by changing the Ni:Cu ratio in the alloys. Finally, the solid volume fraction was adjusted via the tungsten content. Distortion was quantified using profiles determined with a coordinate measuring machine to calculate a distortion parameter. Sintering results showed that solid volume fraction and dihedral angle are the dominant factors on densification and distortion during liquid phase sintering. Distortion decreases with increasing solid volume fraction and dihedral angle, while initial porosity and pore size have no observable effect on distortion at nearly full densification. Various strategies emerge to improve distortion control in liquid phase sintering. (author)

Distorted representation in visual tourism research

DEFF Research Database (Denmark)

Jensen, Martin Trandberg

2016-01-01

how photographic materialities, performativities and sensations contribute to new tourism knowledges. While highlighting the potential of distorted representation, the paper posits a cautionary note in regards to the influential role of academic journals in determining the qualities of visual data....... The paper exemplifies distorted representation through three impressionistic tales derived from ethnographic research on the European rail travel phenomenon: interrail.......Tourism research has recently been informed by non-representational theories to highlight the socio-material, embodied and heterogeneous composition of tourist experiences. These advances have contributed to further reflexivity and called for novel ways to animate representations...

Navigating Complexities: An Integrative Approach to English Language Teacher Education

Science.gov (United States)

Ryan, Phillip; Glodjo, Tyler; Hobbs, Bethany; Stargel, Victoria; Williams, Thad

2015-01-01

This article is an analysis of one undergraduate English language teacher education program's integrative theoretical framework that is structured around three pillars: interdisciplinarity, critical pedagogy, and teacher exploration. First, the authors survey the unique complexities of language teaching and learning. Then, they introduce this…

On synchronisation of a class of complex chaotic systems with complex unknown parameters via integral sliding mode control

Science.gov (United States)

Tirandaz, Hamed; Karami-Mollaee, Ali

2018-06-01

Chaotic systems demonstrate complex behaviour in their state variables and their parameters, which generate some challenges and consequences. This paper presents a new synchronisation scheme based on integral sliding mode control (ISMC) method on a class of complex chaotic systems with complex unknown parameters. Synchronisation between corresponding states of a class of complex chaotic systems and also convergence of the errors of the system parameters to zero point are studied. The designed feedback control vector and complex unknown parameter vector are analytically achieved based on the Lyapunov stability theory. Moreover, the effectiveness of the proposed methodology is verified by synchronisation of the Chen complex system and the Lorenz complex systems as the leader and the follower chaotic systems, respectively. In conclusion, some numerical simulations related to the synchronisation methodology is given to illustrate the effectiveness of the theoretical discussions.

Molecular model for annihilation rates in positron complexes

Energy Technology Data Exchange (ETDEWEB)

Assafrao, Denise [Laboratorio de Atomos e Moleculas Especiais, Departamento de Fisica, ICEx, Universidade Federal de Minas Gerais, P.O. Box 702, 30123-970 Belo Horizonte, MG (Brazil); Department of Applied Mathematics and Theoretical Physics, Queen' s University of Belfast, Belfast BT7 1NN, Northern Ireland (United Kingdom); Walters, H.R. James [Department of Applied Mathematics and Theoretical Physics, Queen' s University of Belfast, Belfast BT7 1NN, Northern Ireland (United Kingdom); Mohallem, Jose R. [Laboratorio de Atomos e Moleculas Especiais, Departamento de Fisica, ICEx, Universidade Federal de Minas Gerais, P.O. Box 702, 30123-970 Belo Horizonte, MG (Brazil); Department of Applied Mathematics and Theoretical Physics, Queen' s University of Belfast, Belfast BT7 1NN, Northern Ireland (United Kingdom)], E-mail: rachid@fisica.ufmg.br

2008-02-15

The molecular approach for positron interaction with atoms is developed further. Potential energy curves for positron motion are obtained. Two procedures accounting for the nonadiabatic effective positron mass are introduced for calculating annihilation rate constants. The first one takes the bound-state energy eigenvalue as an input parameter. The second is a self-contained and self-consistent procedure. The methods are tested with quite different states of the small complexes HPs, e{sup +}He (electronic triplet) and e{sup +}Be (electronic singlet and triplet). For states yielding the positronium cluster, the annihilation rates are quite stable, irrespective of the accuracy in binding energies. For the e{sup +}Be states, annihilation rates are larger and more consistent with qualitative predictions than previously reported ones.

Molecular model for annihilation rates in positron complexes

International Nuclear Information System (INIS)

Assafrao, Denise; Walters, H.R. James; Mohallem, Jose R.

2008-01-01

The molecular approach for positron interaction with atoms is developed further. Potential energy curves for positron motion are obtained. Two procedures accounting for the nonadiabatic effective positron mass are introduced for calculating annihilation rate constants. The first one takes the bound-state energy eigenvalue as an input parameter. The second is a self-contained and self-consistent procedure. The methods are tested with quite different states of the small complexes HPs, e + He (electronic triplet) and e + Be (electronic singlet and triplet). For states yielding the positronium cluster, the annihilation rates are quite stable, irrespective of the accuracy in binding energies. For the e + Be states, annihilation rates are larger and more consistent with qualitative predictions than previously reported ones

Distortion control in 20MnCr5 bevel gears after liquid nitriding process to maintain precision dimensions

Science.gov (United States)

Mahendiran, M.; Kavitha, M.

2018-02-01

Robotic and automotive gears are generally very high precision components with limitations in tolerances. Bevel gears are more widely used and dimensionally very close tolerance components that need stability without any backlash or distortion for smooth and trouble free functions. Nitriding is carried out to enhance wear resistance of the surface. The aim of this paper is to reduce the distortion in liquid nitriding process, though plasma nitriding is preferred for high precision components. Various trials were conducted to optimize the process parameters, considering pre dimensional setting for nominal nitriding layer growth. Surface cleaning, suitable fixtures and stress relieving operations were also done to optimize the process. Micro structural analysis and Vickers hardness testing were carried out for analyzing the phase changes, variation in surface hardness and case depth. CNC gear testing machine was used for determining the distortion level. The presence of white layer was found for about 10-15μm in the case depth of 250± 3.5μm showing an average surface hardness of 670 HV. Hence the economical liquid nitriding process was successfully used for producing high hardness and wear resistant coating over 20MnCr5 material with less distortion and reduced secondary grinding process for dimensional control.

Integrated load distribution and production planning in series-parallel multi-state systems with failure rate depending on load

International Nuclear Information System (INIS)

Nourelfath, Mustapha; Yalaoui, Farouk

2012-01-01

A production system containing a set of machines (also called components) arranged according to a series-parallel configuration is addressed. A set of products must be produced in lots on this production system during a specified finite planning horizon. This paper presents a method for integrating load distribution decisions, and tactical production planning considering the costs of capacity change and the costs of unused capacity. The objective is to minimize the sum of capacity change costs, unused capacity costs, setup costs, holding costs, backorder costs, and production costs. The main constraints consist in satisfying the demand for all products over the entire horizon, and in not exceeding available repair resource. The production series-parallel system is modeled as a multi-state system with binary-state components. The proposed model takes into account the dependence of machines' failure rates on their load. Universal generating function technique can be used in the optimization algorithm for evaluating the expected system production rate in each period. We show how the formulated problem can be solved by comparing the results of several multi-product lot-sizing problems with capacity associated costs. The importance of integrating load distribution decisions and production planning is illustrated through numerical examples.

Operation of static series compensator under distorted utility conditions

DEFF Research Database (Denmark)

Awad, H.; Nelsen, H.; Blaabjerg, Frede

2005-01-01

in the case of distorted grid voltage. Furthermore, a selective harmonic compensation strategy is applied to filter out the grid harmonics. The operation of the SSC under distorted utility conditions and voltage dips is discussed. The validity of the proposed controller is verified by experiments, carried out...... on a 10-kV SSC laboratory setup. Experimental results have shown the ability of the SSC to mitigate voltage dips and harmonics. It is also shown that the proposed controller has improved the transient performance of the SSC even under distorted utility conditions....

Synthesis, characterization and anticancer activities of two lanthanide(III) complexes with a nicotinohydrazone ligand

Science.gov (United States)

Xu, Zhou-Qin; Mao, Xian-Jie; Jia, Lei; Xu, Jun; Zhu, Tao-Feng; Cai, Hong-Xin; Bie, Hong-Yan; Chen, Ru-Hua; Ma, Tie-liang

2015-12-01

Two isostructural acylhydrazone based complexes, namely [Ce(penh)2(H2O)4](NO3)3·4H2O (1) and [Sm(penh)2(NO3)2](NO3)·C2H5OH (2) (penh = 2-acetylpyridine nicotinohydrazone), have been obtained and characterized by physico-chemical and spectroscopic methods. The ten-coordinated lanthanide metal ion in each complex is surrounded by two independent tridentate neutral acylhydrazones with two ON2 donor sets. The other four coordination oxygen atoms are from four water molecules and two bidentate nitrate anions for complexes 1 and 2, respectively, thus giving distorted bicapped square antiprism geometry. Both complexes have excellent antitumor activity towards human pancreatic cancer (PATU8988), human colorectal cancer (lovo) and human gastric cancer(SGC7901) cell line. Furthermore, the cell apoptosis of complex 1 is detected by AnnexinV/PI flow cytometry.

Effects of bending-torsional duct-induced swirl distortion on aerodynamic performance of a centrifugal compressor

Science.gov (United States)

Hou, Hongjuan; Wang, Leilei; Wang, Rui; Yang, Yanzhao

2017-04-01

A turbocharger compressor working in commercial vehicles, especially in some passenger cars, often works together with some pipes with complicated geometry as an air intake system, due to limit of available space in internal combustion engine compartments. These pipes may generate various distortions of physical parameters of the air at the inlet of the compressor and therefore the compressor aerodynamic performance deteriorates. Sometimes, the turbocharging engine fails to work at some operation points. This paper investigates the effects of various swirl distortions induced by different bending-torsional intake ducts on the aerodynamic performance of a turbocharger compressor by both 3D numerical simulations and experimental measurements. It was found that at the outlet of the pipes the different inlet ducts can generate different swirl distortions, twin vortices and bulk-like vortices with different rotating directions. Among them, the bulk-like vortices not only affect seriously the pressure distribution in the impeller domain, but also significantly deteriorate the compressor performance, especially at high flow rate region. And the rotating direction of the bulk-like vortices is also closely associated with the efficiency penalty. Besides the efficiency, the transient flow rate through a single impeller channel, or the asymmetric mass flow crossing the whole impeller, can be influenced by two disturbances. One is from the upstream bending-torsional ducts; other one is from the downstream volute.

Genetic Architecture of Male Sterility and Segregation Distortion in Drosophila pseudoobscura Bogota–USA Hybrids

Science.gov (United States)

Phadnis, Nitin

2011-01-01

Understanding the genetic basis of reproductive isolation between recently diverged species is a central problem in evolutionary genetics. Here, I present analyses of the genetic architecture underlying hybrid male sterility and segregation distortion between the Bogota and USA subspecies of Drosophila pseudoobscura. Previously, a single gene, Overdrive (Ovd), was shown to be necessary but not sufficient for both male sterility and segregation distortion in F1 hybrids between these subspecies, requiring several interacting partner loci for full manifestation of hybrid phenomena. I map these partner loci separately on the Bogota X chromosome and USA autosomes using a combination of different mapping strategies. I find that hybrid sterility involves a single hybrid incompatibility of at least seven interacting partner genes that includes three large-effect loci. Segregation distortion involves three loci on the Bogota X chromosome and one locus on the autosomes. The genetic bases of hybrid sterility and segregation distortion are at least partially—but not completely—overlapping. My results lay the foundation for fine-mapping experiments to identify the complete set of genes that interact with Overdrive. While individual genes that cause hybrid sterility or inviability have been identified in a few cases, my analysis provides a comprehensive look at the genetic architecture of all components of a hybrid incompatibility underlying F1 hybrid sterility. Such an analysis would likely be unfeasible for most species pairs due to their divergence time and emphasizes the importance of young species pairs such as the D. pseudoobscura subspecies studied here. PMID:21900263

Genetic architecture of male sterility and segregation distortion in Drosophila pseudoobscura Bogota-USA hybrids.

Science.gov (United States)

Phadnis, Nitin

2011-11-01

Understanding the genetic basis of reproductive isolation between recently diverged species is a central problem in evolutionary genetics. Here, I present analyses of the genetic architecture underlying hybrid male sterility and segregation distortion between the Bogota and USA subspecies of Drosophila pseudoobscura. Previously, a single gene, Overdrive (Ovd), was shown to be necessary but not sufficient for both male sterility and segregation distortion in F(1) hybrids between these subspecies, requiring several interacting partner loci for full manifestation of hybrid phenomena. I map these partner loci separately on the Bogota X chromosome and USA autosomes using a combination of different mapping strategies. I find that hybrid sterility involves a single hybrid incompatibility of at least seven interacting partner genes that includes three large-effect loci. Segregation distortion involves three loci on the Bogota X chromosome and one locus on the autosomes. The genetic bases of hybrid sterility and segregation distortion are at least partially--but not completely--overlapping. My results lay the foundation for fine-mapping experiments to identify the complete set of genes that interact with Overdrive. While individual genes that cause hybrid sterility or inviability have been identified in a few cases, my analysis provides a comprehensive look at the genetic architecture of all components of a hybrid incompatibility underlying F(1) hybrid sterility. Such an analysis would likely be unfeasible for most species pairs due to their divergence time and emphasizes the importance of young species pairs such as the D. pseudoobscura subspecies studied here.

Convergent Innovation in Emerging Healthcare Technology Ecosystems: Addressing Complexity and Integration

Directory of Open Access Journals (Sweden)

Mark A. Phillips

2017-09-01

Full Text Available Precision Medicine and Digital Health are emerging areas in healthcare, and they are underpinned by convergent or cross-industry innovation. However, convergence results in greater uncertainty and complexity in terms of technologies, value networks, and organization. There has been limited empirical research on emerging and convergent ecosystems, especially in addressing the issue of integration. This research identifies how organizations innovate in emerging and convergent ecosystems, specifically, how they address the challenge of integration. We base our research on empirical analyses using a series of longitudinal case studies employing a combination of case interviews, field observations, and documents. Our findings identify a need to embrace the complexity by adopting a variety of approaches that balance “credibility-seeking” and “advantage-seeking” behaviours, to navigate, negotiate, and nurture both the innovation and ecosystem, in addition to a combination of “analysis” and “synthesis” actions to manage aspects of integration. We contribute to the convergent innovation agenda and provide practical approaches for innovators in this domain.

Distorted Risk Measures with Application to Military Capability Shortfalls

Science.gov (United States)

2005-12-15

effects of different distortions and to make basic recommendations regarding the appropriateness of certain distortion functions and parameters using...and increased limits ratemaking by proportional hazards transforms. Insurance: Mathematics and Economics, 17: 43-54. [9] Wang, S. (1996a). Premium

Towards Slow-Moving Landslide Monitoring by Integrating Multi-Sensor InSAR Time Series Datasets: The Zhouqu Case Study, China

Directory of Open Access Journals (Sweden)

Qian Sun

2016-11-01

Full Text Available Although the past few decades have witnessed the great development of Synthetic Aperture Radar Interferometry (InSAR technology in the monitoring of landslides, such applications are limited by geometric distortions and ambiguity of 1D Line-Of-Sight (LOS measurements, both of which are the fundamental weakness of InSAR. Integration of multi-sensor InSAR datasets has recently shown its great potential in breaking through the two limits. In this study, 16 ascending images from the Advanced Land Observing Satellite (ALOS and 18 descending images from the Environmental Satellite (ENVISAT have been integrated to characterize and to detect the slow-moving landslides in Zhouqu, China between 2008 and 2010. Geometric distortions are first mapped by using the imaging geometric parameters of the used SAR data and public Digital Elevation Model (DEM data of Zhouqu, which allow the determination of the most appropriate data assembly for a particular slope. Subsequently, deformation rates along respective LOS directions of ALOS ascending and ENVISAT descending tracks are estimated by conducting InSAR time series analysis with a Temporarily Coherent Point (TCP-InSAR algorithm. As indicated by the geometric distortion results, 3D deformation rates of the Xieliupo slope at the east bank of the Pai-lung River are finally reconstructed by joint exploiting of the LOS deformation rates from cross-heading datasets based on the surface–parallel flow assumption. It is revealed that the synergistic results of ALOS and ENVISAT datasets provide a more comprehensive understanding and monitoring of the slow-moving landslides in Zhouqu.

FFTF integrated leak rate computer system

International Nuclear Information System (INIS)

Hubbard, J.A.

1987-01-01

The Fast Flux Test Facility (FFTF) is a liquid-metal-cooled test reactor located on the Hanford site. The FFTF is the only reactor of this type designed and operated to meet the licensing requirements of the Nuclear Regulatory Commission. Unique characteristics of the FFTF that present special challenges related to leak rate testing include thin wall containment vessel construction, cover gas systems that penetrate containment, and a low-pressure design basis accident. The successful completion of the third FFTF integrated leak rate test 5 days ahead of schedule and 10% under budget was a major achievement for the Westinghouse Hanford Company. The success of this operational safety test was due in large part to a special network (LAN) of three IBM PC/XT computers, which monitored the sensor data, calculated the containment vessel leak rate, and displayed test results. The equipment configuration allowed continuous monitoring of the progress of the test independent of the data acquisition and analysis functions, and it also provided overall improved system reliability by permitting immediate switching to backup computers in the event of equipment failure

Integrating the Differentiated: A Review of the Personal Construct Approach to Cognitive Complexity

OpenAIRE

Kovářová, M. (Marie); Filip, M. (Miroslav)

2015-01-01

This article reviews personal construct psychology (PCP) research on cognitive complexity. It examines conceptual foundations, measures of cognitive complexity, and a large body of empirical findings. It identifies several ambiguities in the conceptualization of the two components of cognitive complexity: differentiation and integration. These ambiguities lead to inconsistent interpretations of indexes proposed for their measurement and consequently to an inconsistent interpretation of em...

Integrative structure and functional anatomy of a nuclear pore complex

Science.gov (United States)

Kim, Seung Joong; Fernandez-Martinez, Javier; Nudelman, Ilona; Shi, Yi; Zhang, Wenzhu; Raveh, Barak; Herricks, Thurston; Slaughter, Brian D.; Hogan, Joanna A.; Upla, Paula; Chemmama, Ilan E.; Pellarin, Riccardo; Echeverria, Ignacia; Shivaraju, Manjunatha; Chaudhury, Azraa S.; Wang, Junjie; Williams, Rosemary; Unruh, Jay R.; Greenberg, Charles H.; Jacobs, Erica Y.; Yu, Zhiheng; de La Cruz, M. Jason; Mironska, Roxana; Stokes, David L.; Aitchison, John D.; Jarrold, Martin F.; Gerton, Jennifer L.; Ludtke, Steven J.; Akey, Christopher W.; Chait, Brian T.; Sali, Andrej; Rout, Michael P.

2018-03-01

Nuclear pore complexes play central roles as gatekeepers of RNA and protein transport between the cytoplasm and nucleoplasm. However, their large size and dynamic nature have impeded a full structural and functional elucidation. Here we determined the structure of the entire 552-protein nuclear pore complex of the yeast Saccharomyces cerevisiae at sub-nanometre precision by satisfying a wide range of data relating to the molecular arrangement of its constituents. The nuclear pore complex incorporates sturdy diagonal columns and connector cables attached to these columns, imbuing the structure with strength and flexibility. These cables also tie together all other elements of the nuclear pore complex, including membrane-interacting regions, outer rings and RNA-processing platforms. Inwardly directed anchors create a high density of transport factor-docking Phe-Gly repeats in the central channel, organized into distinct functional units. This integrative structure enables us to rationalize the architecture, transport mechanism and evolutionary origins of the nuclear pore complex.

Integrative structure and functional anatomy of a nuclear pore complex.

Science.gov (United States)

Kim, Seung Joong; Fernandez-Martinez, Javier; Nudelman, Ilona; Shi, Yi; Zhang, Wenzhu; Raveh, Barak; Herricks, Thurston; Slaughter, Brian D; Hogan, Joanna A; Upla, Paula; Chemmama, Ilan E; Pellarin, Riccardo; Echeverria, Ignacia; Shivaraju, Manjunatha; Chaudhury, Azraa S; Wang, Junjie; Williams, Rosemary; Unruh, Jay R; Greenberg, Charles H; Jacobs, Erica Y; Yu, Zhiheng; de la Cruz, M Jason; Mironska, Roxana; Stokes, David L; Aitchison, John D; Jarrold, Martin F; Gerton, Jennifer L; Ludtke, Steven J; Akey, Christopher W; Chait, Brian T; Sali, Andrej; Rout, Michael P

2018-03-22

Nuclear pore complexes play central roles as gatekeepers of RNA and protein transport between the cytoplasm and nucleoplasm. However, their large size and dynamic nature have impeded a full structural and functional elucidation. Here we determined the structure of the entire 552-protein nuclear pore complex of the yeast Saccharomyces cerevisiae at sub-nanometre precision by satisfying a wide range of data relating to the molecular arrangement of its constituents. The nuclear pore complex incorporates sturdy diagonal columns and connector cables attached to these columns, imbuing the structure with strength and flexibility. These cables also tie together all other elements of the nuclear pore complex, including membrane-interacting regions, outer rings and RNA-processing platforms. Inwardly directed anchors create a high density of transport factor-docking Phe-Gly repeats in the central channel, organized into distinct functional units. This integrative structure enables us to rationalize the architecture, transport mechanism and evolutionary origins of the nuclear pore complex.

Audible Aliasing Distortion in Digital Audio Synthesis

Directory of Open Access Journals (Sweden)

J. Schimmel

2012-04-01

Full Text Available This paper deals with aliasing distortion in digital audio signal synthesis of classic periodic waveforms with infinite Fourier series, for electronic musical instruments. When these waveforms are generated in the digital domain then the aliasing appears due to its unlimited bandwidth. There are several techniques for the synthesis of these signals that have been designed to avoid or reduce the aliasing distortion. However, these techniques have high computing demands. One can say that today's computers have enough computing power to use these methods. However, we have to realize that today’s computer-aided music production requires tens of multi-timbre voices generated simultaneously by software synthesizers and the most of the computing power must be reserved for hard-disc recording subsystem and real-time audio processing of many audio channels with a lot of audio effects. Trivially generated classic analog synthesizer waveforms are therefore still effective for sound synthesis. We cannot avoid the aliasing distortion but spectral components produced by the aliasing can be masked with harmonic components and thus made inaudible if sufficient oversampling ratio is used. This paper deals with the assessment of audible aliasing distortion with the help of a psychoacoustic model of simultaneous masking and compares the computing demands of trivial generation using oversampling with those of other methods.