WorldWideScience

Sample records for insulating epitafial oxides

  1. Superconducting interfaces between insulating oxides.

    Science.gov (United States)

    Reyren, N; Thiel, S; Caviglia, A D; Kourkoutis, L Fitting; Hammerl, G; Richter, C; Schneider, C W; Kopp, T; Rüetschi, A-S; Jaccard, D; Gabay, M; Muller, D A; Triscone, J-M; Mannhart, J

    2007-08-31

    At interfaces between complex oxides, electronic systems with unusual electronic properties can be generated. We report on superconductivity in the electron gas formed at the interface between two insulating dielectric perovskite oxides, LaAlO3 and SrTiO3. The behavior of the electron gas is that of a two-dimensional superconductor, confined to a thin sheet at the interface. The superconducting transition temperature of congruent with 200 millikelvin provides a strict upper limit to the thickness of the superconducting layer of congruent with 10 nanometers.

  2. Tuning Ferromagnetism at Interfaces between Insulating Perovskite Oxides

    NARCIS (Netherlands)

    Ganguli, Nirmal; Kelly, Paul J.

    2014-01-01

    We use density functional theory calculations to show that the LaAlO 3 |SrTiO 3 interface between insulating perovskite oxides is borderline in satisfying the Stoner criterion for itinerant ferromagnetism and explore other oxide combinations with a view to satisfying it more amply. The larger latt

  3. Tuning Ferromagnetism at Interfaces between Insulating Perovskite Oxides

    NARCIS (Netherlands)

    Ganguli, N.; Kelly, Paul J.

    2014-01-01

    We use density functional theory calculations to show that the LaAlO 3 |SrTiO 3 interface between insulating perovskite oxides is borderline in satisfying the Stoner criterion for itinerant ferromagnetism and explore other oxide combinations with a view to satisfying it more amply. The larger

  4. Tuning ferromagnetism at interfaces between insulating perovskite oxides

    OpenAIRE

    Ganguli, Nirmal; Kelly, Paul J.

    2014-01-01

    We use density functional theory calculations to show that the LaAlO3|SrTiO3 interface between insulating perovskite oxides is borderline in satisfying the Stoner criterion for itinerant ferromagnetism and explore other oxide combinations with a view to satisfying it more amply. The larger lattice parameter of an LaScO3|BaTiO3 interface is found to be less favorable than the greater interface distortion of LaAlO3|CaTiO3. Compared to LaAlO3|SrTiO3, the latter is predicted to exhibit robust mag...

  5. Insulator

    Energy Technology Data Exchange (ETDEWEB)

    Nakajima, Isao; Ikami, Toshiichi.

    1990-09-17

    The insulating properties of transmission line insulators are reduced when the insulator becomes contaminated. Such contamination is promoted by the adherence of rainwater including dusts and/or absorbing of dusts and gas when the insulated surface is wetted with rainwater. It is known to treat insulators with water repellent compounds to avoid this problem, but known treatments have certain disadvantages such as loss of water repellency in a short time. An object of this invention is to overcome these disadvantages and to provide an insulator having a high usefulness and excellent water repellency which can be easily treated and maintained over a long period of time. It has been found that if a glass layer itself forming the surface of the insulator has water repellent properties, the water repellency of the insulator surface is not lost. According to the invention, the glassy surface is treated with silane or silazane to provide a surface layer of the proper water repellency. The insulator surface may be preferably treated in such a manner that the insulator is immersed in a bath of silane or silazane. Experiments are described to illustrate the performance of insulators treated according to the invention in comparison to non-treated insulators. 1 fig., 1 tab.

  6. Influence of graphene oxide on metal-insulator-semiconductor tunneling diodes

    OpenAIRE

    Lin, Chu-Hsuan; Yeh, Wei-Ting; Chan, Chun-Hui; Lin, Chun-Chieh

    2012-01-01

    In recent years, graphene studies have increased rapidly. Graphene oxide, which is an intermediate product to form graphene, is insulating, and it should be thermally reduced to be electrically conductive. We herein describe an attempt to make use of the insulating properties of graphene oxide. The graphene oxide layers are deposited onto Si substrates, and a metal-insulator-semiconductor tunneling structure is formed and its optoelectronic properties are studied. The accumulation dark curren...

  7. Novel Polyethers Doped with Nanoscale Insulating oxides for Lithium Battery Elec Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Novel polyethers doped with insulating oxides are used to prepare solid polymer electrolytes for high energy density lithium batteries. The electrolytes are...

  8. Tuning Ferromagnetism at Interfaces between Insulating Perovskite Oxides

    Science.gov (United States)

    Ganguli, Nirmal; Kelly, Paul J.

    2014-09-01

    We use density functional theory calculations to show that the LaAlO3|SrTiO3 interface between insulating perovskite oxides is borderline in satisfying the Stoner criterion for itinerant ferromagnetism and explore other oxide combinations with a view to satisfying it more amply. The larger lattice parameter of a LaScO3|BaTiO3 interface is found to be less favorable than the greater interface distortion of LaAlO3|CaTiO3. Compared to LaAlO3|SrTiO3, the latter is predicted to exhibit robust magnetism with a larger saturation moment and a higher Curie temperature. Our results provide support for a "two phase" picture of coexistent superconductivity and ferromagnetism.

  9. Tuning ferromagnetism at interfaces between insulating perovskite oxides.

    Science.gov (United States)

    Ganguli, Nirmal; Kelly, Paul J

    2014-09-19

    We use density functional theory calculations to show that the LaAlO3|SrTiO3 interface between insulating perovskite oxides is borderline in satisfying the Stoner criterion for itinerant ferromagnetism and explore other oxide combinations with a view to satisfying it more amply. The larger lattice parameter of a LaScO3|BaTiO3 interface is found to be less favorable than the greater interface distortion of LaAlO3|CaTiO3. Compared to LaAlO3|SrTiO3, the latter is predicted to exhibit robust magnetism with a larger saturation moment and a higher Curie temperature. Our results provide support for a "two phase" picture of coexistent superconductivity and ferromagnetism.

  10. Metal-insulator and charge ordering transitions in oxide nanostructures

    Science.gov (United States)

    Singh, Sujay Kumar

    Strongly correlated oxides are a class of materials wherein interplay of various degrees of freedom results in novel electronic and magnetic phenomena. Vanadium oxides are widely studied correlated materials that exhibit metal-insulator transitions (MIT) in a wide temperature range from 70 K to 380 K. In this Thesis, results from electrical transport measurements on vanadium dioxide (VO2) and vanadium oxide bronze (MxV 2O5) (where M: alkali, alkaline earth, and transition metal cations) are presented and discussed. Although the MIT in VO2 has been studied for more than 50 years, the microscopic origin of the transition is still debated since a slew of external parameters such as light, voltage, and strain are found to significantly alter the transition. Furthermore, recent works on electrically driven switching in VO2 have shown that the role of Joule heating to be a major cause as opposed to electric field. We explore the mechanisms behind the electrically driven switching in single crystalline nanobeams of VO2 through DC and AC transport measurements. The harmonic analysis of the AC measurement data shows that non-uniform Joule heating causes electronic inhomogeneities to develop within the nanobeam and is responsible for driving the transition in VO2. Surprisingly, field assisted emission mechanisms such as Poole-Frenkel effect is found to be absent and the role of percolation is also identified in the electrically driven transition. This Thesis also provides a new insight into the mechanisms behind the electrolyte gating induced resistance modulation and the suppression of MIT in VO2. We show that the metallic phase of VO2 induced by electrolyte gating is due to an electrochemical process and can be both reversible and irreversible under different conditions. The kinetics of the redox processes increase with temperature; a complete suppression of the transition and the stabilization of the metallic phase are achievable by gating in the rutile metallic phase

  11. Role of oxidation on surface conductance of the topological insulator Bi2Te2Se

    Science.gov (United States)

    Hwang, Jin Heui; Park, Joonbum; Kwon, Sangku; Kim, Jun Sung; Park, Jeong Young

    2014-12-01

    We investigated the effect of surface oxides on charge transport properties in a topological insulator (Bi2Te2Se) using conductive probe atomic force microscopy in an ultrahigh vacuum environment. Uniform distribution of the measured friction and current were observed over a single quintuple layer terrace after exposure to the ambient environment, which is an indication of uniform surface oxide coverage. An oxide-free topological insulator surface was exposed using tip-induced etching. By comparing surface conduction on a fresh surface versus a surface exposed to air, we observed a minor change in resistance when surface oxide was present. The current density varied with applied load on the oxidized surface, which implies that the topological surface states respond to tip-induced pressure even though surface oxide is present. From these results, we conclude that surface oxidation in air has a negligible effect on surface conductance in topological insulators.

  12. Nanoporous Insulating Oxide Deionization Device Having Asymmetric Electrodes and Method of Use Thereof

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A nanoporous insulating oxide deionization device, method of manufacture and method of use thereof for deionizing a water supply (such as a hard water supply), for...

  13. Superconductivity-induced magnetization depletion in a ferromagnet through an insulator in a ferromagnet-insulator-superconductor hybrid oxide heterostructure.

    Science.gov (United States)

    Prajapat, C L; Singh, Surendra; Paul, Amitesh; Bhattacharya, D; Singh, M R; Mattauch, S; Ravikumar, G; Basu, S

    2016-05-21

    Coupling between superconducting and ferromagnetic states in hybrid oxide heterostructures is presently a topic of intense research. Such a coupling is due to the leakage of the Cooper pairs into the ferromagnet. However, tunneling of the Cooper pairs though an insulator was never considered plausible. Using depth sensitive polarized neutron reflectivity we demonstrate the coupling between superconductor and magnetic layers in epitaxial La2/3Ca1/3MnO3 (LCMO)/SrTiO3/YBa2Cu3O7-δ (YBCO) hybrid heterostructures, with SrTiO3 as an intervening oxide insulator layer between the ferromagnet and the superconductor. Measurements above and below the superconducting transition temperature (TSC) of YBCO demonstrate a large modulation of magnetization in the ferromagnetic layer below the TSC of YBCO in these heterostructures. This work highlights a unique tunneling phenomenon between the epitaxial layers of an oxide superconductor (YBCO) and a magnetic layer (LCMO) through an insulating layer. Our work would inspire further investigations on the fundamental aspect of a long range order of the triplet spin-pairing in hybrid structures.

  14. Superconductivity-induced magnetization depletion in a ferromagnet through an insulator in a ferromagnet-insulator-superconductor hybrid oxide heterostructure

    Science.gov (United States)

    Prajapat, C. L.; Singh, Surendra; Paul, Amitesh; Bhattacharya, D.; Singh, M. R.; Mattauch, S.; Ravikumar, G.; Basu, S.

    2016-05-01

    Coupling between superconducting and ferromagnetic states in hybrid oxide heterostructures is presently a topic of intense research. Such a coupling is due to the leakage of the Cooper pairs into the ferromagnet. However, tunneling of the Cooper pairs though an insulator was never considered plausible. Using depth sensitive polarized neutron reflectivity we demonstrate the coupling between superconductor and magnetic layers in epitaxial La2/3Ca1/3MnO3 (LCMO)/SrTiO3/YBa2Cu3O7-δ (YBCO) hybrid heterostructures, with SrTiO3 as an intervening oxide insulator layer between the ferromagnet and the superconductor. Measurements above and below the superconducting transition temperature (TSC) of YBCO demonstrate a large modulation of magnetization in the ferromagnetic layer below the TSC of YBCO in these heterostructures. This work highlights a unique tunneling phenomenon between the epitaxial layers of an oxide superconductor (YBCO) and a magnetic layer (LCMO) through an insulating layer. Our work would inspire further investigations on the fundamental aspect of a long range order of the triplet spin-pairing in hybrid structures.

  15. Hydrogen in insulating oxide Y3Al5O12 strongly narrows the band gap

    Science.gov (United States)

    Winarski, D.; Persson, C.; Selim, F. A.

    2014-12-01

    We report an unusual band gap narrowing in Y3Al5O12 (YAG) insulating oxide after growing YAG single crystals in hydrogen atmosphere. Theory confirms that hydrogen interstitials as well as oxygen vacancies strongly shift the absorption spectrum towards lower energies. Furthermore, hydrogen eliminated all deep and shallow traps in the YAG structure and dramatically modified the optical and scintillation properties of YAG single crystals. We conclude that hydrogen plays a significant role in insulating oxides similar to its role in semiconductors and it may be used to passivate defects and improve exciton dynamics in oxides for optical and scintillation applications.

  16. Chemical oxidation of cable insulating oil contaminated soil

    NARCIS (Netherlands)

    Jinlan Xu,; Pancras, T.; Grotenhuis, J.T.C.

    2011-01-01

    Leaking cable insulating oil is a common source of soil contamination of high-voltage underground electricity cables in many European countries. In situ remediation of these contaminations is very difficult, due to the nature of the contamination and the high concentrations present. Chemical oxidati

  17. Preparation and Property Study of Graphene Oxide Reinforced Epoxy Resin Insulation Nanocomposites with High Heat Conductivity

    Science.gov (United States)

    Shan, Xinran; Liu, Yongchang; Wu, Zhixiong; Liu, Huiming; Zhang, Zhong; Huang, Rongjin; Huang, Chuanjun; Liu, Zheng; Li, Laifeng

    2017-02-01

    In this paper, graphene oxide reinforced epoxy resin nanocomposites were successfully prepared. Compared with unmodified epoxy resin, the heat conductivity of the graphene oxide reinforced epoxy resin nanocomposites had been improved while keeping the insulation performance. The tensile strength was investigated at both room temperature (300 K) and liquid nitrogen temperature (77 K). And the fracture surfaces were examined by scanning electron microscopy (SEM). Results showed that the materials had excellent mechanical properties, which could be advantages for the applications as insulating layer in low temperature superconducting magnets.

  18. Photoinduced Coherent Spin Fluctuation in Primary Dynamics of Insulator to Metal Transition in Perovskite Cobalt Oxide

    Directory of Open Access Journals (Sweden)

    Arima T.

    2013-03-01

    Full Text Available Coherent spin fluctuation was detected in the photoinduced Mott insulator-metal transition in perovskite cobalt oxide by using 3 optical-cycle infrared pulse. Such coherent spin fluctuation is driven by the perovskite distortion changing orbital gap.

  19. Radiation hardness of indium oxide films in the Cooper-pair insulator state

    Directory of Open Access Journals (Sweden)

    Lazarević Đorđe R.

    2012-01-01

    Full Text Available This paper investigates possible radiation effects in the Cooper-pair insulator state of indium oxide films. Radiation effects are predicted on the basis of Monte Carlo simulations. Results of a combined theoretical and numerical analysis suggest that radiation-induced changes in the investigated films could significantly affect their current-voltage characteristics, and that a transition to a metallic state is possible, due to radiation-induced disruption of the fine-tuned granular structure. Dissociation of Cooper pairs, caused by both the incident radiation and the ions displaced within InOx films, can also destroy the conditions for this specific insulating state to subsist.

  20. Rapid optical determination of topological insulator nanoplate thickness and oxidation

    Directory of Open Access Journals (Sweden)

    Fan Yang

    2017-01-01

    Full Text Available The stability of 2D antimony telluride (Sb2Te3 nanoplates in ambient conditions is elucidated. These materials exhibit an anisotropic oxidation mode, and CVD synthesized samples oxidize at a much faster rate than exfoliated samples investigated in previous studies. Optical measurement techniques are introduced to rapidly measure the oxidation modes and thickness of 2D materials. Auger characterization were conducted to confirm that oxygen replaces tellurium as opposed to antimony under ambient conditions. No surface morphology evolution was detected in AFM before and after exposure to air. These techniques were employed to determine the origin of the thickness dependent color change effect in Sb2Te3. It is concluded that this effect is a combination of refractive index change due to oxidation and Fresnel effects.

  1. Thermally insulating and fire-retardant lightweight anisotropic foams based on nanocellulose and graphene oxide

    Science.gov (United States)

    Wicklein, Bernd; Kocjan, Andraž; Salazar-Alvarez, German; Carosio, Federico; Camino, Giovanni; Antonietti, Markus; Bergström, Lennart

    2015-03-01

    High-performance thermally insulating materials from renewable resources are needed to improve the energy efficiency of buildings. Traditional fossil-fuel-derived insulation materials such as expanded polystyrene and polyurethane have thermal conductivities that are too high for retrofitting or for building new, surface-efficient passive houses. Tailored materials such as aerogels and vacuum insulating panels are fragile and susceptible to perforation. Here, we show that freeze-casting suspensions of cellulose nanofibres, graphene oxide and sepiolite nanorods produces super-insulating, fire-retardant and strong anisotropic foams that perform better than traditional polymer-based insulating materials. The foams are ultralight, show excellent combustion resistance and exhibit a thermal conductivity of 15 mW m-1 K-1, which is about half that of expanded polystyrene. At 30 °C and 85% relative humidity, the foams retained more than half of their initial strength. Our results show that nanoscale engineering is a promising strategy for producing foams with excellent properties using cellulose and other renewable nanosized fibrous materials.

  2. Polarizing Oxygen Vacancies in Insulating Metal Oxides under a High Electric Field

    Science.gov (United States)

    Youssef, Mostafa; Van Vliet, Krystyn J.; Yildiz, Bilge

    2017-09-01

    We demonstrate a thermodynamic formulation to quantify defect formation energetics in an insulator under a high electric field. As a model system, we analyzed neutral oxygen vacancies (color centers) in alkaline-earth-metal binary oxides using density functional theory, Berry phase calculations, and maximally localized Wannier functions. The work of polarization lowers the field-dependent electric Gibbs energy of formation of this defect. This is attributed mainly to the ease of polarizing the two electrons trapped in the vacant site, and secondarily to the defect induced reduction in bond stiffness and softening of phonon modes. The formulation and analysis have implications for understanding the behavior of insulating oxides in electronic, magnetic, catalytic, and electrocaloric devices under a high electric field.

  3. Monte Carlo study of the electrothermal phenomenon in silicon-on-insulator and silicon-germanium-on-insulator metal-oxide field-effect transistors

    Science.gov (United States)

    Sadi, Toufik; Kelsall, Robert W.

    2010-03-01

    Self-heating effects are investigated in silicon-on-insulator (SOI), silicon-germanium-on-insulator (SGOI), and strained-silicon-directly-on-insulator (SSDOI) metal-oxide field-effect transistors (MOSFETs), using a Monte Carlo simulator self-consistently coupled with the solution of the heat diffusion equation. Although the influence of thermal effects is in general higher in these structures, as compared to bulk Si MOSFETs, its impact is much more important in SGOI and SSDOI FET structures incorporating ultrathin Si channels, with SGOI FETs giving the worst thermal performance. A study of the dependence of the extent of self-heating on the buried-oxide thickness is also performed, showing that this parameter is important in designing SOI structures with better thermal management.

  4. Unusual hydrogen peroxide decomposition on stoichiometric insulating oxide ultrathin films

    CERN Document Server

    Song, Zhenjun

    2016-01-01

    The hydrogen peroxide dissociation on MgO(001) films deposited on Mo(001) surface is investigated by employing periodic density-functional theory methods. The pristine MgO(001) surface showing chemical inertness prefers the weak adsorbing molecular configuration and is extremely difficult to react with hydrogen peroxide. As far as we know, energetically favorable decomposition state of hydrogen peroxide has never been obtained on MgO(001) surface. In this work the hydrogen peroxide is successfully dissociated on perfect stoichiometric MgO(001) films by depositing on transition metal substrate, without any activation barrier. The spontaneous dissociation of hydrogen peroxide on metal supported oxide films is rationalized by characterizing the geometric structures and electronic structures.

  5. Systematic study of metal-insulator-metal diodes with a native oxide

    KAUST Repository

    Donchev, E.

    2014-10-07

    © 2014 SPIE. In this paper, a systematic analysis of native oxides within a Metal-Insulator-Metal (MIM) diode is carried out, with the goal of determining their practicality for incorporation into a nanoscale Rectenna (Rectifying Antenna). The requirement of having a sub-10nm oxide scale is met by using the native oxide, which forms on most metals exposed to an oxygen containing environment. This, therefore, provides a simplified MIM fabrication process as the complex, controlled oxide deposition step is omitted. We shall present the results of an investigation into the current-voltage characteristics of various MIM combinations that incorporate a native oxide, in order to establish whether the native oxide is of sufficient quality for good diode operation. The thin native oxide layers are formed by room temperature oxidation of the first metal layer, deposited by magnetron sputtering. This is done in-situ, within the deposition chamber before depositing the second metal electrode. Using these structures, we study the established trend where the bigger the difference in metal workfunctions, the better the rectification properties of MIM structures, and hence the selection of the second metal is key to controlling the device\\'s rectifying properties. We show how leakage current paths through the non-optimised native oxide control the net current-voltage response of the MIM devices. Furthermore, we will present the so-called diode figures of merit (asymmetry, non-linearity and responsivity) for each of the best performing structures.

  6. Improving oxidation resistance and thermal insulation of thermal barrier coatings by intense pulsed electron beam irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Mei Xianxiu, E-mail: xxmei@dlut.edu.cn [Key Laboratory of Materials Modification by Laser, Ion and Electron Beams, Dalian University of Technology, Ministry of Education, Dalian 116024 (China); Liu Xiaofei; Wang Cunxia; Wang Younian; Dong Chuang [Key Laboratory of Materials Modification by Laser, Ion and Electron Beams, Dalian University of Technology, Ministry of Education, Dalian 116024 (China)

    2012-12-15

    Highlights: Black-Right-Pointing-Pointer Pulsed electron beam was used for sealing ZrO{sub 2} thermal barrier coating prepared by electron beam-physical vapor deposition. Black-Right-Pointing-Pointer At irradiation energy densities above 8 J/cm{sup 2}, ZrO{sub 2} ceramic coating surface was fully re-melted and became smooth, dense and shiny. Black-Right-Pointing-Pointer The thermal diffusion rate of the irradiated coating was decreased. Black-Right-Pointing-Pointer Thermal insulation properties and high temperature oxidation resistance were improved. - Abstract: In this paper, intense pulsed electron beam was used for the irradiation treatment of 6-8% Y{sub 2}O{sub 3}-stablized ZrO{sub 2} thermal barrier coating prepared by electron beam-physical vapor deposition to achieve the 'sealing' of columnar crystals, thus improving their thermal insulation properties and high temperature oxidation resistance. The electron beam parameters used were: pulse duration 200 {mu}s, electron voltage 15 kV, energy density 3, 5, 8, 15, 20 J/cm{sup 2}, and pulsed numbers 30. 1050 Degree-Sign C cyclic oxidation and static oxidation experiments were used for the research on oxidation resistance of the coatings. When the energy density of the electron beam was larger than 8 J/cm{sup 2}, ZrO{sub 2} ceramic coating surface was fully re-melted and became smooth, dense and shiny. The coating changed into a smooth polycrystalline structure, thus achieving the 'sealing' effect of the columnar crystals. After irradiations with the energy density of 8-15 J/cm{sup 2}, the thermally grown oxide coating thickness decreased significantly in comparison with non-irradiated coatings, showing that the re-melted coating improved the oxidation resistance of the coatings. The results of thermal diffusivity test by laser flash method showed that the thermal diffusion rate of the irradiated coating was lower than that of the coating without irradiation treatment, and the thermal

  7. Disappearance of nodal gap across the insulator-superconductor transition in a copper-oxide superconductor.

    Science.gov (United States)

    Peng, Yingying; Meng, Jianqiao; Mou, Daixiang; He, Junfeng; Zhao, Lin; Wu, Yue; Liu, Guodong; Dong, Xiaoli; He, Shaolong; Zhang, Jun; Wang, Xiaoyang; Peng, Qinjun; Wang, Zhimin; Zhang, Shenjin; Yang, Feng; Chen, Chuangtian; Xu, Zuyan; Lee, T K; Zhou, X J

    2013-01-01

    The parent compound of the copper-oxide high-temperature superconductors is a Mott insulator. Superconductivity is realized by doping an appropriate amount of charge carriers. How a Mott insulator transforms into a superconductor is crucial in understanding the unusual physical properties of high-temperature superconductors and the superconductivity mechanism. Here we report high-resolution angle-resolved photoemission measurement on heavily underdoped Bi₂Sr₂-xLaxCuO(₆+δ) system. The electronic structure of the lightly doped samples exhibit a number of characteristics: existence of an energy gap along the nodal direction, d-wave-like anisotropic energy gap along the underlying Fermi surface, and coexistence of a coherence peak and a broad hump in the photoemission spectra. Our results reveal a clear insulator-superconductor transition at a critical doping level of ~0.10 where the nodal energy gap approaches zero, the three-dimensional antiferromagnetic order disappears, and superconductivity starts to emerge. These observations clearly signal a close connection between the nodal gap, antiferromagnetism and superconductivity.

  8. Selective Deposition of Insulating Metal Oxide in Perovskite Solar Cells with Enhanced Device Performance.

    Science.gov (United States)

    Yue, Youfeng; Yang, Xudong; Wu, Yongzhen; Salim, Noviana Tjitra; Islam, Ashraful; Noda, Takeshi; Han, Liyuan

    2015-08-24

    We report a simple methodology for the selective deposition of an insulating layer on the nanoparticulate TiO2 (np-TiO2) mesoporous layer of perovskite solar cells. The deposited MgO insulating layer mainly covered the bottom part of the np-TiO2 layer with less coverage at the top. The so-called quasi-top-open structure is introduced to act as an efficient hole-blocking layer to prevent charge recombination at the physical contact of the transparent conducting oxide with the perovskite. This leads to an open-circuit voltage higher than that of the reference cell with a compact TiO2 hole-blocking layer. Moreover, such a quasi-top-open structure can facilitate the electron injection from perovskite into the np-TiO2 mesoporous layer and improve the spectral response at longer wavelength because of the less covered insulating layer at the top. This work provides an alternative way to fabricate perovskite solar cells without the need to use a conventional compact TiO2 layer.

  9. Nanophotonic devices on thin buried oxide Silicon-On-Insulator substrates

    CERN Document Server

    Sridaran, Suresh

    2009-01-01

    We demonstrate a silicon photonic platform using thin buried oxide silicon-on-insulator (SOI) substrates using localized substrate removal. We show high confinement silicon strip waveguides, micro-ring resonators and nanotapers using this technology. Propagation losses for the waveguides using the cutback method are 3.88 dB/cm for the quasi-TE mode and 5.06 dB/cm for the quasi-TM mode. Ring resonators with a loaded quality factor (Q) of 46,500 for the quasi-TM mode and intrinsic Q of 148,000 for the quasi-TE mode have been obtained. This process will enable the integration of photonic structures with thin buried oxide SOI based electronics.

  10. Self-duality and a Hall-insulator phase near the superconductor-to-insulator transition in indium-oxide films.

    Science.gov (United States)

    Breznay, Nicholas P; Steiner, Myles A; Kivelson, Steven Allan; Kapitulnik, Aharon

    2016-01-12

    We combine measurements of the longitudinal (ρxx) and Hall (ρxy) resistivities of disordered 2D amorphous indium-oxide films to study the magnetic-field tuned superconductor-to-insulator transition (H-SIT) in the T --> 0 limit. At the critical field, Hc, the full resistivity tensor is T independent with ρxx(Hc) = h/4e(2) and ρxy(Hc) = 0 within experimental uncertainty in all films (i.e., these appear to be "universal" values); this is strongly suggestive that there is a particle-vortex self-duality at H = Hc. The transition separates the (presumably) superconducting state at H insulator" phase in which ρxx --> ∞ as T --> 0 whereas ρxy approaches a nonzero value smaller than its "classical value" H/nec; i.e., 0 Hc, at which the Hall resistance is T independent and roughly equal to its classical value, ρxy ≈ H/nec, marks an additional crossover to a high-field regime (probably to a Fermi insulator) in which ρxy > H/nec and possibly diverges as T --> 0. We also highlight a profound analogy between the H-SIT and quantum-Hall liquid-to-insulator transitions (QHIT).

  11. Zirconium Micro-Arc Oxidation as a Method for Producing Heat Insulation Elements in Spacecraft

    Directory of Open Access Journals (Sweden)

    V. K. Shatalov

    2014-01-01

    Full Text Available Application of coatings on the surface of materials as well as their composition and structure control in the near-surface layer enables us to use properties of base material and modified layers in the most rational and profitable way and save expensive and rare metals and alloys.The space telescope of T-170M will be the main tool of the international space observatory "Spektr-UF".It is being understood that the main mirror shade, which is in the outer space and has a considerable height will act as a radiator cooling a unit (cage of the main mirror. Therefore it is necessary to create heat insulation between the shade of the main mirror and the frame of the main mirror unit. From the thermal calculations a detail to provide heat insulation must possess thermal conductivity, at most, 2,5 and a conditional limit of fluidity for compression, at least, 125 MPas to ensure that the shade diaphragms position of the main mirror is stable with respect to the optical system of telescope.Considering that oxide of zirconium possesses one of the lowest thermal conductivities among oxides of metals, it is offered to use zirconium, as a material of base, and to put the MAO-covering (micro-arc oxide on its surface.As a result of studying the features of MAO-coverings on zirconium it is:1 found that the composite material consisting of zirconium and MAO-covering on it, has low thermal conductivity (less than 2 , and thus, because of small oxide layer thickness against the thickness of base material, possesses the mechanical properties which are slightly different from the pure zirconium ones;2 found that the composite material possesses the low gas release, allowing its use in the outer space conditions; the material processed in two electrolytes i.e. phosphate and acid ones has the lowest gas release;3 found that with growing thickness of MAO-covering its porosity decreases, thus the average pore diameter grows thereby leading to increasing thermal

  12. Relaxed SiGe-on-insulator fabricated by dry oxidation of sandwiched Si/SiGe/Si structure

    Energy Technology Data Exchange (ETDEWEB)

    Di Zengfeng [Research Center of Semiconductor Functional Film Engineering Technology and State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology (SIMIT), Chinese Academy of Sciences (CAS), Shanghai 200050 (China); Department of Physics and Material Science, City University of Hong Kong, Tat Chee Avenue, Kowloon, Hong Kong (China); Zhang Miao [Research Center of Semiconductor Functional Film Engineering Technology and State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology (SIMIT), Chinese Academy of Sciences (CAS), Shanghai 200050 (China); Liu Weili [Research Center of Semiconductor Functional Film Engineering Technology and State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology (SIMIT), Chinese Academy of Sciences (CAS), Shanghai 200050 (China); Zhu Ming [Research Center of Semiconductor Functional Film Engineering Technology and State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology (SIMIT), Chinese Academy of Sciences (CAS), Shanghai 200050 (China); Department of Physics and Material Science, City University of Hong Kong, Tat Chee Avenue, Kowloon, Hong Kong (China); Lin Chenglu [Research Center of Semiconductor Functional Film Engineering Technology and State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology (SIMIT), Chinese Academy of Sciences (CAS), Shanghai 200050 (China); Chu, Paul K. [Department of Physics and Material Science, City University of Hong Kong, Tat Chee Avenue, Kowloon, Hong Kong (China)]. E-mail: paul.chu@cityu.edu.hk

    2005-12-05

    An improved technique is demonstrated to fabricate silicon-germanium on insulator (SGOI) starting with a sandwiched structure of Si/SiGe/Si. After oxidation of the sandwiched structure and successive annealing, a relaxed SiGe-on-insulator (SGOI) structure is produced. Our results indicate that the added Si cap layer is advantageous in suppressing Ge loss at the initial stage of SiGe oxidation and the subsequent annealing process homogenizes the Ge fraction. Raman measurements reveal that the strain in the SiGe layer is fully relaxed at high oxidation temperature ({approx}1150 deg. C) without generating any threading dislocations and crosshatch patterns, which generally exist in the relaxed SiGe layer on bulk Si substrate.

  13. Dirac topological insulator in the dz2 manifold of a honeycomb oxide

    Science.gov (United States)

    Lado, J. L.; Pardo, V.

    2016-09-01

    We show by means of ab initio calculations and tight-binding modeling that an oxide system based on a honeycomb lattice can sustain topologically nontrivial states if a single orbital dominates the spectrum close to the Fermi level. In such a situation, the low-energy spectrum is described by two Dirac equations that become nontrivially gapped when spin-orbit coupling (SOC) is switched on. We provide one specific example but the recipe is general. We discuss a realization of this starting from a conventional spin-1/2 honeycomb antiferromagnet whose states close to the Fermi energy are dz2 orbitals. Switching off magnetism by atomic substitution and ensuring that the electronic structure becomes two-dimensional is sufficient for topologicality to arise in such a system. By deriving a tight-binding Wannier Hamiltonian, we find that the gap in such a model scales linearly with SOC, opposed to other oxide-based topological insulators, where smaller gaps tend to appear by construction of the lattice. We show that the quantum spin Hall state in this system survives in the presence of off-plane magnetism and the orbital magnetic field and we discuss its Landau level spectra, showing that our recipe provides a dz2 realization of the Kane-Mele model.

  14. An Emergent Spin-Filter at the interface between Ferromagnetic and Insulating Layered Oxides

    Science.gov (United States)

    Liu, Yaohua

    2014-03-01

    Complex oxide heterostructures are of keen interest because modified bonding at the interfaces can give rise to fundamentally new phenomena and valuable functionalities. Particularly, an induced magnetization is widely observed at epitaxial interfaces between layered transition-metal oxides; however, much less effort has been spent on investigating how it affects the charge transport properties. To this end, we have studied magnetic tunneling junctions consisting of ferromagnetic manganite La0.7Ca0.3MnO3 (LCMO) and insulating cuprate PrBa2Cu3O7 (PBCO). Contrary to the typically observed steady increase of the tunnel magnetoresistance with decreasing temperature, this system exhibits an anomalous decrease at low temperatures. Polarized neutron reflectometry (PNR) and x-ray magnetic circular dichroism (XMCD) studies on LCMO/PBCO/LCMO trilayers show that the saturation magnetization of the LCMO contacts increase as the temperature decreases. In other words, degradation of the ferromagnetic contacts is ruled out as a cause. Interestingly, there exists induced net Cu moments, which indicates that the spin degeneracy of the conduction band of the PBCO barrier is lifted and thus the barrier becomes spin selective. Our calculations, within the Wentzel-Kramers-Brillouin approximation, show that the complex temperature dependence can arise from a competition between the high positive spin polarization of the manganite electrodes and a negative spin-filter effect from the interfacial Cu magnetization. This work illustrates that the interface-induced magnetization in layered oxide heterostructures can have non-trivial effects on the macroscopic transport properties. Work performed in collaboration with FA Cuellar, Z Sefrioui, C Leon, J Santamaria (Universidad Complutense de Madrid), JW Freeland, SGE te Velthuis (ANL) and MR Fitzsimmons (LANL). Work at Argonne National Laboratory was supported by the U.S. Department of Energy, Office of Basic Energy Sciences under contract no

  15. High-temperature interface superconductivity between metallic and insulating copper oxides.

    Science.gov (United States)

    Gozar, A; Logvenov, G; Kourkoutis, L Fitting; Bollinger, A T; Giannuzzi, L A; Muller, D A; Bozovic, I

    2008-10-09

    The realization of high-transition-temperature (high-T(c)) superconductivity confined to nanometre-sized interfaces has been a long-standing goal because of potential applications and the opportunity to study quantum phenomena in reduced dimensions. This has been, however, a challenging target: in conventional metals, the high electron density restricts interface effects (such as carrier depletion or accumulation) to a region much narrower than the coherence length, which is the scale necessary for superconductivity to occur. By contrast, in copper oxides the carrier density is low whereas T(c) is high and the coherence length very short, which provides an opportunity-but at a price: the interface must be atomically perfect. Here we report superconductivity in bilayers consisting of an insulator (La(2)CuO(4)) and a metal (La(1.55)Sr(0.45)CuO(4)), neither of which is superconducting in isolation. In these bilayers, T(c) is either approximately 15 K or approximately 30 K, depending on the layering sequence. This highly robust phenomenon is confined within 2-3 nm of the interface. If such a bilayer is exposed to ozone, T(c) exceeds 50 K, and this enhanced superconductivity is also shown to originate from an interface layer about 1-2 unit cells thick. Enhancement of T(c) in bilayer systems was observed previously but the essential role of the interface was not recognized at the time.

  16. Cobalt iron-oxide nanoparticle modified poly(methyl methacrylate) nanodielectrics. Dielectric and electrical insulation properties

    Science.gov (United States)

    Tuncer, Enis; Rondinone, Adam J.; Woodward, Jonathan; Sauers, Isidor; James, D. Randy; Ellis, Alvin R.

    2009-03-01

    In this paper, we report the dielectric properties of composite systems (nanodielectrics) made of small amounts of mono dispersed magnetic nanoparticles embedded in a polymer matrix. It is observed from the transmission electron microscope images that the matrix polymeric material is confined in approximately 100 nm size cages between particle clusters. The particle clusters are composed of separated spherical particles which comprise unconnected networks in the matrix. The dielectric relaxation and breakdown characteristics of the matrix polymeric material are altered with the addition of nanometer size cobalt iron-oxide particles. The dielectric breakdown measurements performed at 77 K showed that these nanodielectrics are potentially useful as an electrical insulation material for cryogenic high voltage applications. Finally, structural and dielectric properties of nanocomposite dielectrics are discussed to present plausible reasons for the observed low effective dielectric permittivity values in the present and similar nanodielectric systems. It is concluded that polymeric nanoparticle composites would have low dielectric permittivity regardless of the permittivity of nanoparticles are when the particles are coordinated with a low dielectric permittivity surfactant.

  17. Silicon-on-insulator-based complementary metal oxide semiconductor integrated optoelectronic platform for biomedical applications

    Science.gov (United States)

    Mujeeb-U-Rahman, Muhammad; Scherer, Axel

    2016-12-01

    Microscale optical devices enabled by wireless power harvesting and telemetry facilitate manipulation and testing of localized biological environments (e.g., neural recording and stimulation, targeted delivery to cancer cells). Design of integrated microsystems utilizing optical power harvesting and telemetry will enable complex in vivo applications like actuating a single nerve, without the difficult requirement of extreme optical focusing or use of nanoparticles. Silicon-on-insulator (SOI)-based platforms provide a very powerful architecture for such miniaturized platforms as these can be used to fabricate both optoelectronic and microelectronic devices on the same substrate. Near-infrared biomedical optics can be effectively utilized for optical power harvesting to generate optimal results compared with other methods (e.g., RF and acoustic) at submillimeter size scales intended for such designs. We present design and integration techniques of optical power harvesting structures with complementary metal oxide semiconductor platforms using SOI technologies along with monolithically integrated electronics. Such platforms can become the basis of optoelectronic biomedical systems including implants and lab-on-chip systems.

  18. Integrated Active Magnetic Probe in Silicon-on-Insulator Complementary Metal-Oxide-Semiconductor Technology

    Science.gov (United States)

    Aoyama, Satoshi; Kawahito, Shoji; Yamaguchi, Masahiro

    2006-09-01

    A novel magnetic probe has been designed and fabricated by 0.15 μm five-metal (4M + thick metal) silicon-on-insulator (SOI) complementary metal-oxide-semiconductor (CMOS) technology to achieve both a high sensitivity and a high spatial resolution. A detecting coil having metal multilayers, a two-stage differential amplifier, a differential-to-single-ended converter, and an output buffer are integrated on a single chip. The probe is referred to as an active probe, and it has a feature to distinguish magnetic field from detected electromagnetic emissions by means of a two-turn differential coil structure and a circuit technique using a wideband differential-to-single-ended converter with a high common-mode rejection. Measurement results show the effectiveness of the active magnetic probe with the function of on-chip amplification and electric field suppression, as well as electrical switching with common-mode voltage (Vcom). Moreover, for the first time, a magnetic field distribution is visualized with an active probe.

  19. Steam oxidation scale growth and thermal insulation effect on creep life of creep strength enhanced ferritic steels

    Energy Technology Data Exchange (ETDEWEB)

    Masuyama, Fujimitsu; Tokunaga, Tatsuya [Kyushu Inst. of Technology (Japan). Graduate School of Engineering; Takao, Mikito [Kyushu Inst. of Technology (Japan). Graduate School of Engineering; JFE Steel Corporation (Japan); Arakawa, Katsutoshi [Kyushu Inst. of Technology (Japan). Graduate School of Engineering; Kobe Steel Ltd. (Japan)

    2010-07-01

    Creep strength enhanced ferritic steels, such as T91 and T23 are extensively used worldwide for superheater and reheater tubes, not only in advanced power plants but also in plants with conventional steam conditions. However when these steel tubes are used at higher metal temperature, steam oxidation problems are recently experienced resulting in turbine side erosion, and overheating of tubes leading to creep rupture due to scale blockage in tube bends or scale insulation effect due to thick scale, and separation and exfoliation of the scale. In the present study, steam oxidation growth tests of T91, T92, T23 and T22 were conducted to develop steam oxidation growth rate and scale behavior. Then using the steam oxidation growth data measured the metal temperature changes with scale growth were calculated considering the insulation effect of steam oxidation scale. Consequently the creep lives affected by steam oxidation scale growth were predicted as a function of time and temperature increase for creep strength enhanced ferritic steels. (orig.)

  20. Improvement in performance of solution-processed indium-zinc-tin oxide thin-film transistors by UV/O3 treatment on zirconium oxide gate insulator

    Science.gov (United States)

    Naik, Bukke Ravindra; Avis, Christophe; Delwar Hossain Chowdhury, Md; Kim, Taehun; Lin, Tengda; Jang, Jin

    2016-03-01

    We studied solution-processed amorphous indium-zinc-tin oxide (a-IZTO) thin-film transistors (TFTs) with spin-coated zirconium oxide (ZrOx) as the gate insulator. The ZrOx gate insulator was used without and with UV/O3 treatment. The TFTs with an untreated ZrOx gate dielectric showed a saturation mobility (μsat) of 0.91 ± 0.29 cm2 V-1 s-1, a threshold voltage (Vth) of 0.28 ± 0.36 V, a subthreshold swing (SS) of 199 ± 37.17 mV/dec, and a current ratio (ION/IOFF) of ˜107. The TFTs with a UV/O3-treated ZrOx gate insulator exhibited μsat of 2.65 ± 0.43 cm2 V-1 s-1, Vth of 0.44 ± 0.35 V, SS of 133 ± 24.81 mV/dec, and ION/IOFF of ˜108. Hysteresis was 0.32 V in the untreated TFTs and was eliminated by UV/O3 treatment. Also, the leakage current decreased significantly when the IZTO TFT was coated onto a UV/O3-treated ZrOx gate insulator.

  1. Numerically controlled atmospheric-pressure plasma sacrificial oxidation using electrode arrays for improving silicon-on-insulator layer uniformity

    Science.gov (United States)

    Takei, Hiroyasu; Yoshinaga, Keinosuke; Matsuyama, Satoshi; Yamauchi, Kazuto; Sano, Yasuhisa

    2015-01-01

    Silicon-on-insulator (SOI) wafers are important semiconductor substrates in high-performance devices. In accordance with device miniaturization requirements, ultrathin and highly uniform top silicon layers (SOI layers) are required. A novel method involving numerically controlled (NC) atmospheric-pressure plasma sacrificial oxidation using an electrode array system was developed for the effective fabrication of an ultrathin SOI layer with extremely high uniformity. Spatial resolution and oxidation properties are the key factors controlling ultraprecision machining. The controllability of plasma oxidation and the oxidation properties of the resulting experimental electrode array system were examined. The results demonstrated that the method improved the thickness uniformity of the SOI layer over one-sixth of the area of an 8-in. wafer area.

  2. Inhomogeneous electronic state near the insulator-to-metal transition in the correlated oxide VO2

    Science.gov (United States)

    Frenzel, A.; Qazilbash, M. M.; Brehm, M.; Chae, Byung-Gyu; Kim, Bong-Jun; Kim, Hyun-Tak; Balatsky, A. V.; Keilmann, F.; Basov, D. N.

    2009-09-01

    We investigate the percolative insulator-to-metal transition (IMT) in films of the correlated material vanadium dioxide (VO2) . Scattering-type scanning near-field infrared microscopy and atomic force microscopy were used to explore the relationship between the nucleation of metallic regions and the topography in insulating VO2 . We demonstrate that the IMT begins within 10 nm from grain boundaries and crevices by using mean curvature and statistical analysis. We also observe coexistence of insulating and metallic domains in a single crystalline grain that points to intrinsic inhomogeneity in VO2 due to competing electronic phases in the IMT regime.

  3. Titanium Oxide Crystallization and Interface Defect Passivation for High Performance Insulator-Protected Schottky Junction MIS Photoanodes.

    Science.gov (United States)

    Scheuermann, Andrew G; Lawrence, John P; Meng, Andrew C; Tang, Kechao; Hendricks, Olivia L; Chidsey, Christopher E D; McIntyre, Paul C

    2016-06-15

    Atomic layer deposited (ALD) TiO2 protection layers may allow for the development of both highly efficient and stable photoanodes for solar fuel synthesis; however, the very different conductivities and photovoltages reported for TiO2-protected silicon anodes prepared using similar ALD conditions indicate that mechanisms that set these key properties are, as yet, poorly understood. In this report, we study hydrogen-containing annealing treatments and find that postcatalyst-deposition anneals at intermediate temperatures reproducibly yield decreased oxide/silicon interface trap densities and high photovoltage. A previously reported insulator thickness-dependent photovoltage loss in metal-insulator-semiconductor Schottky junction photoanodes is suppressed. This occurs simultaneously with TiO2 crystallization and an increase in its dielectric constant. At small insulator thickness, a record for a Schottky junction photoanode of 623 mV photovoltage is achieved, yielding a photocurrent turn-on at 0.92 V vs NHE or -0.303 V with respect to the thermodynamic potential for water oxidation.

  4. Experimental Studies of New GaAs Metal/Insulator/p-n+ Switches Using Low Temperature Oxide

    Directory of Open Access Journals (Sweden)

    K. F. Yarn

    2002-01-01

    grown at low temperature by a liquid phase chemical-enhanced oxide (LPECO with a thickness of 100 Å. A significant S-shaped negative differential resistance (NDR is shown to occur that originates from the regenerative feedback in a tunnel metal/insulator/semiconductor (MIS interface and p-n+ junction. The influence of epitaxial doping concentration on the switching and holding voltages is investigated. The switching voltages are found to be decreased when increasing the epitaxial doping concentration, while the holding voltages are almost kept constant. A high turn-off/turn-on resistance ratio up to 105 has been obtained.

  5. Metal-oxide assisted surface treatment of polyimide gate insulators for high-performance organic thin-film transistors.

    Science.gov (United States)

    Kim, Sohee; Ha, Taewook; Yoo, Sungmi; Ka, Jae-Won; Kim, Jinsoo; Won, Jong Chan; Choi, Dong Hoon; Jang, Kwang-Suk; Kim, Yun Ho

    2017-06-14

    We developed a facile method for treating polyimide-based organic gate insulator (OGI) surfaces with self-assembled monolayers (SAMs) by introducing metal-oxide interlayers, called the metal-oxide assisted SAM treatment (MAST). To create sites for surface modification with SAM materials on polyimide-based OGI (KPI) surfaces, the metal-oxide interlayer, here amorphous alumina (α-Al2O3), was deposited on the KPI gate insulator using spin-coating via a rapid sol-gel reaction, providing an excellent template for the formation of a high-quality SAM with phosphonic acid anchor groups. The SAM of octadecylphosphonic acid (ODPA) was successfully treated by spin-coating onto the α-Al2O3-deposited KPI film. After the surface treatment by ODPA/α-Al2O3, the surface energy of the KPI thin film was remarkably decreased and the molecular compatibility of the film with an organic semiconductor (OSC), 2-decyl-7-phenyl-[1]benzothieno[3,2-b][1]benzothiophene (Ph-BTBT-C10), was increased. Ph-BTBT-C10 molecules were uniformly deposited on the treated gate insulator surface and grown with high crystallinity, as confirmed by atomic force microscopy (AFM) and X-ray diffraction (XRD) analysis. The mobility of Ph-BTBT-C10 thin-film transistors (TFTs) was approximately doubled, from 0.56 ± 0.05 cm(2) V(-1) s(-1) to 1.26 ± 0.06 cm(2) V(-1) s(-1), after the surface treatment. The surface treatment of α-Al2O3 and ODPA significantly decreased the threshold voltage from -21.2 V to -8.3 V by reducing the trap sites in the OGI and improving the interfacial properties with the OSC. We suggest that the MAST method for OGIs can be applied to various OGI materials lacking reactive sites using SAMs. It may provide a new platform for the surface treatment of OGIs, similar to that of conventional SiO2 gate insulators.

  6. Metallic and Insulating Interfaces of Amorphous SrTiO3-Based Oxide Heterostructures

    DEFF Research Database (Denmark)

    Chen, Yunzhong; Pryds, Nini; Kleibeuker, Josée E.

    2011-01-01

    AlO3, SrTiO3, and yttria-stabilized zirconia films. On the other hand, samples of amorphous La7/8Sr1/8MnO3 films on SrTiO3 substrates remain insulating. The interfacial conductivity results from the formation of oxygen vacancies near the interface, suggesting that the redox reactions on the surface...

  7. Metal-insulator transition in tin doped indium oxide (ITO) thin films: Quantum correction to the electrical conductivity

    Science.gov (United States)

    Kaushik, Deepak Kumar; Kumar, K. Uday; Subrahmanyam, A.

    2017-01-01

    Tin doped indium oxide (ITO) thin films are being used extensively as transparent conductors in several applications. In the present communication, we report the electrical transport in DC magnetron sputtered ITO thin films (prepared at 300 K and subsequently annealed at 673 K in vacuum for 60 minutes) in low temperatures (25-300 K). The low temperature Hall effect and resistivity measurements reveal that the ITO thin films are moderately dis-ordered (kFl˜1; kF is the Fermi wave vector and l is the electron mean free path) and degenerate semiconductors. The transport of charge carriers (electrons) in these disordered ITO thin films takes place via the de-localized states. The disorder effects lead to the well-known `metal-insulator transition' (MIT) which is observed at 110 K in these ITO thin films. The MIT in ITO thin films is explained by the quantum correction to the conductivity (QCC); this approach is based on the inclusion of quantum-mechanical interference effects in Boltzmann's expression of the conductivity of the disordered systems. The insulating behaviour observed in ITO thin films below the MIT temperature is attributed to the combined effect of the weak localization and the electron-electron interactions.

  8. Insulating ferromagnetic oxide films: the controlling role of oxygen vacancy ordering

    Energy Technology Data Exchange (ETDEWEB)

    Salafranca Laforga, Juan I [ORNL; Salafranca, Juan [Universidad Complutense de Madrid, Spain; Biskup, Nevenko [ORNL; Mehta, Virat [University of California, Berkeley; Oxley, Mark P [ORNL; Suzuki, Yuri [Stanford University; Pennycook, Stephen J [University of Tennessee, Knoxville (UTK); Pantelides, Sokrates T. [Vanderbilt University, Nashville; Varela del Arco, Maria [ORNL

    2014-01-01

    The origin of ferromagnetism in strained epitaxial LaCoO3 films has been a long-standing mystery. Here, we combine atomically resolved Z-contrast imaging, electron-energy-loss spectroscopy, and density-functional calculations to demonstrate that, in epitaxial LaCoO3 films, oxygen-vacancy superstructures release strain, control the film s electronic properties, and produce the observed ferromagnetism via the excess electrons in the Co d states. Although oxygen vacancies typically dope a material n-type, we find that ordered vacancies induce Peierls-like minigaps which, combined with strain relaxation, trigger a nonlinear rupture of the energy bands, resulting in insulating behavior.

  9. Total dose radiation response of modified commercial silicon-on-insulator materials with nitrogen implanted buried oxide

    Institute of Scientific and Technical Information of China (English)

    Zheng Zhong-Shan; Liu Zhong-Li; Yu Fang; Li Ning

    2012-01-01

    Nitrogen ions of various doses are implanted into the buried oxide (BOX) of commercial silicon-on-insulator (SOI)materials,and subsequent annealings are carried out at various temperatures.The total dose radiation responses of the nitrogen-implanted SOI wafers are characterized by the high frequency capacitance-voltage (C-V) technique after irradiation using a Co-60 source.It is found that there exist relatively complex relationships between the radiation hardness of the nitrogen implanted BOX and the nitrogen implantation dose at different irradiation doses.Fhe experimental results also suggest that a lower dose nitrogen implantation and a higher post-implantation annealing temperature are suitable for improving the radiation hardness of SOI wafer.Based on the measured C-V data,secondary ion mass spectrometry (SIMS),and Fourier transform infrared (FTIR) spectroscopy,the total dose responses of the nitrogen-implanted SOI wafers are discussed.

  10. 天然酯绝缘油氧化安定性试验探讨%Discussion on Oxidation Stability Test of Natural Ester Insulating Oil

    Institute of Scientific and Technical Information of China (English)

    蔡胜伟; 陈江波; 尹晶; 陈程; 何妍; 刘芮彤

    2016-01-01

    In order to explore the suitable oxidation stability test method for natural ester insulating oil, the existing oxidation stability test methods for mineral insulating oil were compared. According to the IEC 62770—2013 standard, the improved oxidation stability test method was selected based on NB/SH/T 0811—2010 standard to test the properties of FR3® natural ester insulating oil. The results show that the improved oxidation stability test method is suitable for the natural ester insulating oil.%为了探索适用于天然酯绝缘油的氧化安定性试验方法,对现有矿物绝缘油氧化安定性试验方法进行比较分析,参考IEC 62770—2013标准,选取基于NB/SH/T 0811—2010标准改进的氧化安定性试验方法对FR3®型天然酯绝缘油进行试验。结果表明:改进后的氧化安定性试验方法适用于天然酯绝缘油。

  11. High K Oxide Insulated Gate Group III Nitride-Based FETs

    Science.gov (United States)

    2014-03-21

    the physical and electrical properties of high-k dielectric oxides on gallium nitride were explored. The efficacies of several cleaning procedures...surface roughening. Parameters examined included the oxide composition (AI203, Ti02, and Ga203), the gallium nitride crystallographic orientation (c...and m-plane), and its crystal polarity (Ga- anc N-polar). 15. SUBJECT TERMS Gallium nitride , oxides, atomic layer deposition, capitance-voltage

  12. Realization of metal-insulator transition and oxidation in silver nanowire percolating networks by terahertz reflection spectroscopy.

    Science.gov (United States)

    Tsai, Yao-Jiun; Chang, Chi-Ying; Lai, Yi-Chun; Yu, Pei-Chen; Ahn, Hyeyoung

    2014-01-08

    Metal nanowires (NWs) enable versatile applications in printed electronics and optoelectronics by serving as thin and flexible transparent electrodes. The performance of metal NWs as thin electrodes is highly correlated to the connectivity of NW meshes. The percolation threshold of metal NW films corresponds to the minimum density of NWs to form the transparent, yet conductive metal NW networks. Here, we determine the percolation threshold of silver NW (AgNW) networks by using morphological analysis and terahertz (THz) reflection spectroscopy. From the divergent behavior of carrier scattering time and the increase of carrier backscattering factor, the critical NW density at which crossover from Drude to non-Drude behavior of THz conductivity occurs can be unambiguously determined for AgNW thin films. Furthermore, the natural oxidation of AgNWs which causes the gradual reduction of the connectivity of the AgNW network is also realized by the THz spectroscopy. The selective oxidation of NW-to-NW junctions weakens the ohmic contact, and for AgNWs near a critical density, it can even lead to metal-insulator transition. The presented results offer invaluable information to accelerate the deployment of metal nanowires for next-generation electronics and optoelectronics on flexible substrates.

  13. Effect of NO annealing on charge traps in oxide insulator and transition layer for 4H-SiC metal-oxide-semiconductor devices

    Science.gov (United States)

    Jia, Yifan; Lv, Hongliang; Niu, Yingxi; Li, Ling; Song, Qingwen; Tang, Xiaoyan; Li, Chengzhan; Zhao, Yanli; Xiao, Li; Wang, Liangyong; Tang, Guangming; Zhang, Yimen; Zhang, Yuming

    2016-09-01

    The effect of nitric oxide (NO) annealing on charge traps in the oxide insulator and transition layer in n-type 4H-SiC metal-oxide-semiconductor (MOS) devices has been investigated using the time-dependent bias stress (TDBS), capacitance-voltage (C-V), and secondary ion mass spectroscopy (SIMS). It is revealed that two main categories of charge traps, near interface oxide traps (Nniot) and oxide traps (Not), have different responses to the TDBS and C-V characteristics in NO-annealed and Ar-annealed samples. The Nniot are mainly responsible for the hysteresis occurring in the bidirectional C-V characteristics, which are very close to the semiconductor interface and can readily exchange charges with the inner semiconductor. However, Not is mainly responsible for the TDBS induced C-V shifts. Electrons tunneling into the Not are hardly released quickly when suffering TDBS, resulting in the problem of the threshold voltage stability. Compared with the Ar-annealed sample, Nniot can be significantly suppressed by the NO annealing, but there is little improvement of Not. SIMS results demonstrate that the Nniot are distributed within the transition layer, which correlated with the existence of the excess silicon. During the NO annealing process, the excess Si atoms incorporate into nitrogen in the transition layer, allowing better relaxation of the interface strain and effectively reducing the width of the transition layer and the density of Nniot. Project supported by the National Natural Science Foundation of China (Grant Nos. 61404098 and 61274079), the Doctoral Fund of Ministry of Education of China (Grant No. 20130203120017), the National Key Basic Research Program of China (Grant No. 2015CB759600), the National Grid Science & Technology Project, China (Grant No. SGRI-WD-71-14-018), and the Key Specific Project in the National Science & Technology Program, China (Grant Nos. 2013ZX02305002-002 and 2015CB759600).

  14. Artificial semiconductor/insulator superlattice channel structure for high-performance oxide thin-film transistors.

    Science.gov (United States)

    Ahn, Cheol Hyoun; Senthil, Karuppanan; Cho, Hyung Koun; Lee, Sang Yeol

    2013-01-01

    High-performance thin-film transistors (TFTs) are the fundamental building blocks in realizing the potential applications of the next-generation displays. Atomically controlled superlattice structures are expected to induce advanced electric and optical performance due to two-dimensional electron gas system, resulting in high-electron mobility transistors. Here, we have utilized a semiconductor/insulator superlattice channel structure comprising of ZnO/Al2O3 layers to realize high-performance TFTs. The TFT with ZnO (5 nm)/Al2O3 (3.6 nm) superlattice channel structure exhibited high field effect mobility of 27.8 cm(2)/Vs, and threshold voltage shift of only < 0.5 V under positive/negative gate bias stress test during 2 hours. These properties showed extremely improved TFT performance, compared to ZnO TFTs. The enhanced field effect mobility and stability obtained for the superlattice TFT devices were explained on the basis of layer-by-layer growth mode, improved crystalline nature of the channel layers, and passivation effect of Al2O3 layers.

  15. Analysis of the temperature dependence of the thermal conductivity of insulating single crystal oxides

    Directory of Open Access Journals (Sweden)

    E. Langenberg

    2016-10-01

    Full Text Available The temperature dependence of the thermal conductivity of 27 different single crystal oxides is reported from ≈20 K to 350 K. These crystals have been selected among the most common substrates for growing epitaxial thin-film oxides, spanning over a range of lattice parameters from ≈3.7 Å to ≈12.5 Å. Different contributions to the phonon relaxation time are discussed on the basis of the Debye model. This work provides a database for the selection of appropriate substrates for thin-film growth according to their desired thermal properties, for applications in which heat management is important.

  16. Highly refractory heat-insulating articles based on polycrystalline oxide fibers (review)

    Energy Technology Data Exchange (ETDEWEB)

    Dergaputskaya, L.A.; Degtyareva, E.V.; Dubinko, O.A.; Kalinovskaya, I.N.; Serova, L.V.

    1986-05-01

    The authors discuss the production of polycrystalline fibers from highly refractory oxides, mainly alumina and zirconium dioxide which are the most readily available and the cheapest materials, but highly refractory fibers may be obtained also from other oxides. The fibers are obtained in the monoand polycrystalline forms and the preparation methods for polycrystalline highly refractory fibers are described in some detail. The properties for the main types are given. An addition of small amounts of alumina, polycrystalline fibers to mullite-siliceous glass fiber has a significant influence on the reduction in the shrinkage.

  17. Efficient perovskite solar cells by combination use of Au nanoparticles and insulating metal oxide.

    Science.gov (United States)

    Zhang, Chenxi; Luo, Qi; Shi, Jianhua; Yue, Liyang; Wang, Zengbo; Chen, Xiaohong; Huang, Sumei

    2017-02-23

    Achieving high open-circuit voltage and high short-circuit current density simultaneously is a big challenge in the development of highly efficient perovskite solar cells, due to the complex excitonic nature of hybrid organic-inorganic semiconductors. Herein, we developed a facile and effective method to fabricate efficient plasmonic PSC devices. The solar cells were prepared by incorporating Au nanoparticles (NPs) into mesoporous TiO2 films and depositing a MgO passivation film on the Au NP-modified mesoporous titania via wet spinning and pyrolysis of magnesium salt. The PSCs obtained by combining Au NPs and MgO demonstrated a high power conversion efficiency of 16.1%, with both a high open-circuit voltage of 1.09 V and a high short-circuit current density of 21.76 mA cm(-2). The device achieved a 34.2% improvement in the power conversion efficiency compared with a device based on pure TiO2. Moreover, a significant improvement of the UV stability in the perovskite solar cell was achieved due to the combined use of Au NPs and insulating MgO. The fundamental optics and physics behind the regulation of energy flow in the perovskite solar cell and the concept of using Au NPs and MgO to improve the device performance were explored. The results indicate that the combined use of Au NPs and a MgO passivation film is an effective way to design high performance and high stability organic-inorganic perovskite photovoltaic materials.

  18. Improved Performance of Organic Thin Film Transistor with an Inorganic Oxide/Polymer Double-Layer Insulator

    Institute of Scientific and Technical Information of China (English)

    ZHAO Yi-Hua; DONG Gui-Fang; WANG Li-Duo; QIU Yong

    2007-01-01

    We employ the Ta2O5/PVP (poly-4-vinylphenol) double-layer gate insulator to improve the performance of pentacene thin-film transistors. It is found that the double-layer insulator has low leakage current, smooth surface and considerably high capacitance. Compared to Ta2O5 insulator layers, the device with the Ta2O5/PVP double-layer insulator exhibits an enhancement of the Reid-effect mobility from 0.21 to 0.54 cm2 /Vs, and the decreasing threshold voltage from 4.38V to -2.5 V. The results suggest that the Ta2O5/PVP double-layer insulator is a potential gate insulator for fabricating OTFTs with good electrical performance.

  19. Metal-insulator transition in 3d transition-metal oxides with ABO 3 and A 2BO 4 type structures

    Science.gov (United States)

    Eisaki, H.; Ido, T.; Magoshi, K.; Mochizuki, M.; Yamatsu, H.; Ito, T.; Uchida, S.

    1991-12-01

    3d transition-metal oxides with perovskite and K 2NiF 4 crystal structures, (La,Sr)VO 3, (La,Sr)FeO 3, (La,Sr)CoO 3, LaNiO 3 and (La,Sr) 2NiO 4 systems are investigated focusing on the effect of carrier doping performed by the A-site ion substitution. Both (La,Sr)VO 3 and (La,Sr)CoO 3 systems show an insulator to metal transition by Sr substitution, however, the magnetic behavior differs drastically. The mid-infrared structure induced by Sr substitution is observed in the optical spectra of (La,Sr) 2NiO 4 system. Relation between the behavior of metal-insulator transition and the variation of the electronic and/or spin structure in these systems is discussed in comparison with the high-T c copper oxides.

  20. A Novel Fully Depleted Air AlN Silicon-on-Insulator Metal-Oxide-Semiconductor Field Effect Transistor

    Institute of Scientific and Technical Information of China (English)

    YANG Yuan; GAO Yong; GONG Peng-Liang

    2008-01-01

    @@ A novel fully depleted air AlN silicon-on-insulator (SOI) metal-oxide-semiconductor field effect transistor (MOS-FET) is presented, which can eliminate the self-heating effect and solve the problem that the off-state current of SOI MOSFETs increases and the threshold voltage characteristics become worse when employing a high thermal conductivity material as a buried layer. The simulation results reveal that the lattice temperature in normal SOI devices is 75K higher than the atmosphere temperature, while the lattice temperature is just 4K higher than the atmosphere temperature resulting in less severe self-heating effect in air AlN SOI MOSFETs and AlN SOI MOSFETs. The on-state current of air AlN SOI MOSFETs is similar to the AlN SOI structure, and improves 12.3% more than that of normal SOI MOSFETs. The off-state current of AlN SOI is 6.7 times of normal SOI MOSFETs, while the counterpart of air AlN SOI MOSFETs is lower than that of SOI MOSFETs by two orders of magnitude. The threshold voltage change of air AlN SOI MOSFETs with different drain voltage is much less than that of AlN SOI devices, when the drain voltage is biased at 0.8 V, this difference is 28mV, so the threshold voltage change induced by employing high thermal conductivity material is cured.

  1. Real-space observation of metal-insulator transition at complex oxide heterointerface with cross-sectional STM

    Science.gov (United States)

    Chiu, Ya-Ping; Lin, Jheng-Cyuan; Thanh, Tra-Vu; Lin, Tai-Te; Huang, Po-Cheng; Huang, Bo-Chao; Lin, Jiunn-Yuan; Chu, Ying-Hao

    We report the direct observation of tunable electronic property through visible light at LaAlO3 / SrTiO3 (LAO/STO) complex oxide heterointerface using cross-sectional scanning tunneling microscopy and spectroscopy (XSTM/S). Many researches have shown that for the interface to be conducting, the thickness of LAO should be equal to or greater than the critical value 4 unit cells (u.c.). With LAO surface modification by Au clusters, interfacial two-dimensional electron gas presents a giant optical switching effect under visible light illuminated. In this study, through the interaction between photons and electrons system, a direct observation of the evolution of electronic structures from insulating to conducting has been revealed in the LAO (3u.c.)/STO model using the technique of cross-sectional scanning tunneling microscopy and spectroscopy. Results clearly reveal the changes in the built-in electric field in LAO and the band bending in the STO adjacent to the interface after light illumination. National Sun Yat-sen University, Taiwan; Academia Sinica, Taiwan.

  2. Aging Evaluation for NPP Cable with XLPE Insulation by using Oxidation Induction Time Measurement Test

    Energy Technology Data Exchange (ETDEWEB)

    Jang, Kyung Nam [Research Institute of Korea Electric Power Corporation, Daejeon (Korea, Republic of)

    2009-05-15

    There are a lot of cables in the nuclear power plant. The cables, especially inside containment, are exposed in the harsh environment. Those cables may be aged more rapidly due to the high temperature and radiation, and the life time of them may be shorter. If the life time of the cables in the harsh environment is expired due to the rapid aging, those cables should be replaced immediately. For the replacement in the appropriate time before the end of life time, we should perform the frequent condition monitoring of the cable. Among the many method of condition monitoring, we used the oxidation induction time (OIT) measurement test method because the polymer aged by means of chemical reactions with oxygen. Especially, in this paper, we analyze the OIT value affected by thermal and radiation aging.

  3. High-T(c) Superconductivity at the Interface between the CaCuO2 and SrTiO3 Insulating Oxides.

    Science.gov (United States)

    Di Castro, D; Cantoni, C; Ridolfi, F; Aruta, C; Tebano, A; Yang, N; Balestrino, G

    2015-10-02

    At interfaces between complex oxides it is possible to generate electronic systems with unusual electronic properties, which are not present in the isolated oxides. One important example is the appearance of superconductivity at the interface between insulating oxides, although, until now, with very low T(c). We report the occurrence of high T(c) superconductivity in the bilayer CaCuO(2)/SrTiO(3), where both the constituent oxides are insulating. In order to obtain a superconducting state, the CaCuO(2)/SrTiO(3) interface must be realized between the Ca plane of CaCuO(2) and the TiO(2) plane of SrTiO(3). Only in this case can oxygen ions be incorporated in the interface Ca plane, acting as apical oxygen for Cu and providing holes to the CuO(2) planes. A detailed hole doping spatial profile can be obtained by scanning transmission electron microscopy and electron-energy-loss spectroscopy at the O K edge, clearly showing that the (super)conductivity is confined to about 1-2 CaCuO(2) unit cells close to the interface with SrTiO(3). The results obtained for the CaCuO(2)/SrTiO(3) interface can be extended to multilayered high T(c) cuprates, contributing to explaining the dependence of T(c) on the number of CuO(2) planes in these systems.

  4. Performance of titanium oxide-polymer insulation in superconducting coils made of Bi-2212/Ag-alloy round wire

    Science.gov (United States)

    Chen, Peng; Trociewitz, Ulf P.; Dalban-Canassy, Matthieu; Jiang, Jianyi; Hellstrom, Eric E.; Larbalestier, David C.

    2013-07-01

    Conductor insulation is one of the key components needed to make Ag-alloy clad Bi2Sr2CaCu2O8+x (Bi-2212/Ag) superconducting round wire (RW) successful for high field magnet applications, as dielectric standoff and high winding current densities (Jw) directly depend on it. In this study, a TiO2-polymer insulation coating developed by nGimat LLC was applied to test samples and a high field test coil. The insulation was investigated by differential thermal analysis (DTA), thermo-gravimetric analysis (TGA), scanning electron microscopy (SEM), dielectric property measurement, and transport critical current (Ic) property measurement. About 29% of the insulation by weight is polymer. When the Bi-2212/Ag wire is fully heat treated, this decomposes with slow heating to 400 ° C in pure O2. After the full reaction, we found that the TiO2 did not degrade the critical current properties, adhered well to the conductor, and provided a breakdown voltage of more than 100 V, which allowed the test coil to survive quenching in 31.2 T background field, while providing a 2.6 T field increment. For Bi-2212/Ag RW with a typical diameter of 1.0-1.5 mm, this ˜15 μm thick insulation allows a very high coil packing factor of ˜0.74, whereas earlier alumino-silicate braid insulation only allows packing factors of 0.38-0.48.

  5. High performance top-gated indium–zinc–oxide thin film transistors with in-situ formed HfO{sub 2} gate insulator

    Energy Technology Data Exchange (ETDEWEB)

    Song, Yang, E-mail: yang_song@brown.edu [Department of Physics, Brown University, 182 Hope Street, Providence, RI 02912 (United States); Zaslavsky, A. [Department of Physics, Brown University, 182 Hope Street, Providence, RI 02912 (United States); School of Engineering, Brown University, 184 Hope Street, Providence, RI 02912 (United States); Paine, D.C. [School of Engineering, Brown University, 184 Hope Street, Providence, RI 02912 (United States)

    2016-09-01

    We report on top-gated indium–zinc–oxide (IZO) thin film transistors (TFTs) with an in-situ formed HfO{sub 2} gate dielectric insulator. Building on our previous demonstration of high-performance IZO TFTs with Al{sub 2}O{sub 3}/HfO{sub 2} gate dielectric, we now report on a one-step process, in which Hf is evaporated onto the 20 nm thick IZO channel, forming a partially oxidized HfO{sub x} layer, without any additional insulator in-between. After annealing in air at 300 °C, the in-situ reaction between partially oxidized Hf and IZO forms a high quality HfO{sub 2} gate insulator with a low interface trapped charge density N{sub TC} ~ 2.3 × 10{sup 11} cm{sup −2} and acceptably low gate leakage < 3 × 10{sup −7} A/cm{sup 2} at gate voltage V{sub G} = 1 V. The annealed TFTs with gate length L{sub G} = 50 μm have high mobility ~ 95 cm{sup 2}/V ∙ s (determined via the Y-function technique), high on/off ratio ~ 10{sup 7}, near-zero threshold voltage V{sub T} = − 0.02 V, and a subthreshold swing of 0.062 V/decade, near the theoretical limit. The on-current of our proof-of-concept TFTs is relatively low, but can be improved by reducing L{sub G}, indicating that high-performance top-gated HfO{sub 2}-isolated IZO TFTs can be fabricated using a single-step in-situ dielectric formation approach. - Highlights: • High-performance indium–zinc–oxide (IZO) thin film transistors (TFTs). • Single-step in-situ dielectric formation approach simplifies fabrication process. • During anneal, reaction between HfO{sub x} and IZO channel forms a high quality HfO{sub 2} layer. • Gate insulator HfO{sub 2} shows low interface trapped charge and small gate leakage. • TFTs have high mobility, near-zero threshold voltage, and a low subthreshold swing.

  6. Electrical analysis of high dielectric constant insulator and metal gate metal oxide semiconductor capacitors on flexible bulk mono-crystalline silicon

    KAUST Repository

    Ghoneim, Mohamed T.

    2015-06-01

    We report on the electrical study of high dielectric constant insulator and metal gate metal oxide semiconductor capacitors (MOSCAPs) on a flexible ultra-thin (25 μm) silicon fabric which is peeled off using a CMOS compatible process from a standard bulk mono-crystalline silicon substrate. A lifetime projection is extracted using statistical analysis of the ramping voltage (Vramp) breakdown and time dependent dielectric breakdown data. The obtained flexible MOSCAPs operational voltages satisfying the 10 years lifetime benchmark are compared to those of the control MOSCAPs, which are not peeled off from the silicon wafer. © 2014 IEEE.

  7. Electrostatic doping of a Mott insulator in an oxide heterostructure: the case of LaVO{sub 3}/SrTiO{sub 3}

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, Andreas; Pfaff, Florian; Sing, Michael; Claessen, Ralph [Physikalisches Insititut and Roentgen Research Center for Complex Material Systems, Universitaet Wuerzburg, D-97074 Wuerzburg (Germany); Boschker, Hans; Kamp, Martin; Koster, Gertjan; Rijnders, Guus [Faculty of Science and Technology and MESA-plus Institute for Nanotechnology, University of Twente, 7500 AE Enschede (Netherlands)

    2012-07-01

    The discovery of a quasi-two-dimensional electron system at the interface between the two band insulators LaAlO{sub 3} and SrTiO{sub 3} has triggered intense investigations of oxide heterostructures with other material combinations. The hope is that by combining a polar overlayer with a non-polar substrate electronic reconstruction will lead to highly mobile interface charge carriers with special properties. The formation of a conducting interface layer in epitaxial LaVO{sub 3}/SrTiO{sub 3}, where LaVO{sub 3} is a Mott insulator, is studied by transport measurements and hard X-ray photoelectron spectroscopy. We identify an insulator-to-metal transition above a critical LaVO{sub 3} thickness with transport properties similar to those recently reported for LaAlO{sub 3}/SrTiO{sub 3} interfaces. Interestingly, our photoemission measurements give evidence that electronic charge is transferred exclusively to the LaVO{sub 3}-side of the interface caused by an electronic reconstruction within the film itself. This opens the opportunity to study a band-filling controlled Mott transition induced by a purely electrostatic mechanism.

  8. Thermal insulator

    Energy Technology Data Exchange (ETDEWEB)

    Yamamoto, R.; Asada, Y.; Matsuo, Y.; Mikoda, M.

    1985-07-16

    A thermal insulator comprises an expanded resin body having embedded therein an evacuated powder insulation portion which consists of fine powder and a container of film-like plastics or a film-like composite of plastics and metal for enclosing the powder. The resin body has been expanded by a Freon gas as a blowing agent. Since a Freon gas has a larger molecular diameter than the constituent gases of air, it is less likely to permeate through the container than air. Thus present invention provides a novel composite insulator which fully utilizes the benefits of vacuum insulation without necessitating a strong and costly material for a vacuum container.

  9. Cellulose Insulation

    Science.gov (United States)

    1980-01-01

    Fire retardant cellulose insulation is produced by shredding old newspapers and treating them with a combination of chemicals. Insulating material is blown into walls and attics to form a fiber layer which blocks the flow of air. All-Weather Insulation's founders asked NASA/UK-TAP to help. They wanted to know what chemicals added to newspaper would produce an insulating material capable of meeting federal specifications. TAP researched the query and furnished extensive information. The information contributed to successful development of the product and helped launch a small business enterprise which is now growing rapidly.

  10. Thin film three-dimensional topological insulator metal-oxide-semiconductor field-effect-transistors: A candidate for sub-10 nm devices

    Energy Technology Data Exchange (ETDEWEB)

    Akhavan, N. D., E-mail: nima.dehdashti@uwa.edu.au; Jolley, G.; Umana-Membreno, G. A.; Antoszewski, J.; Faraone, L. [Department of Electrical, Electronic and Computer Engineering, University of Western Australia, Crawley, WA 6009 (Australia)

    2014-08-28

    Three-dimensional (3D) topological insulators (TI) are a new state of quantum matter in which surface states reside in the bulk insulating energy bandgap and are protected by time-reversal symmetry. It is possible to create an energy bandgap as a consequence of the interaction between the conduction band and valence band surface states from the opposite surfaces of a TI thin film, and the width of the bandgap can be controlled by the thin film thickness. The formation of an energy bandgap raises the possibility of thin-film TI-based metal-oxide-semiconductor field-effect-transistors (MOSFETs). In this paper, we explore the performance of MOSFETs based on thin film 3D-TI structures by employing quantum ballistic transport simulations using the effective continuous Hamiltonian with fitting parameters extracted from ab-initio calculations. We demonstrate that thin film transistors based on a 3D-TI structure provide similar electrical characteristics compared to a Si-MOSFET for gate lengths down to 10 nm. Thus, such a device can be a potential candidate to replace Si-based MOSFETs in the sub-10 nm regime.

  11. A High Breakdown Voltage A1GaN/GaN MOSHEMT Using Thermal Oxidized Al-Ti as the Gate Insulator

    Institute of Scientific and Technical Information of China (English)

    ZHOU Bin; WANG Jin-Yan; MENG Di; LIN Shu-Xun; FANG Min; DONG Zhi-Hua; YU Min; HAOYi-Long; Cheng P. WEN

    2011-01-01

    Direct oxidation of composite Al/Ti metal films as gate insulators for AlGaN/GaN metal-oxide-semiconductor high-electron mobility transistors (MOSHEMTs/HEMTs) is successfully realized.The devices fabricated with this novel process exhibit four orders of magnitude reduction in gate leakage current and remarkable breakdown voltage (Vbr =490 V vs 88 V for normal HEMT) improvement,compared with conventional Schottky-gate HEMTs.Furthermore,the transconductance of the MOSHEMT is only slightly lower (2.6%) than that of Schottky-gate HEMTs and have a wider full width of half maximum.The notable enhancement in device performance renders this new process highly promising for GaN-based microwave power amplifier applications in communication and radar systems.AlGaN/GaN high-electron mobility transistors (HEMTs) are expected to be applied in the highfrequency and high-power area because of their excellent properties.AlGaN/GaN has,for example,a wide energy band gap (3.39eV),high density (up to 1013 cm-2) two-dimensional electron gas (2DEG)and a high saturation electron velocity.Due to the unavailability of native oxide,Schottky-contact gates are commonly adopted in AlGaN/GaN HEMTs.%Direct oxidation of composite Al/Ti metal films as gate insulators for AlGaN/GaN metal-oxide-semiconductor high-electron mobility transistors (MOSHEMTs/HEMTs) is successfully realized. The devices fabricated with this novel process exhibit four orders of magnitude reduction in gate leakage current and remarkable breakdown voltage (Vbr = 490 V vs 88 V for normal HEMT) improvement, compared with conventional Schottky-gate HEMTs. Furthermore, the transconductance of the MOSHEMT is only slightly lower (2.6%) than that of Schottky-gate HEMTs and have a wider full width of half maximum. The notable enhancement in device performance renders this new process highly promising for GaN-based microwave power amplifier applications in communication and radar systems.

  12. Low-frequency noise in amorphous indium-gallium-zinc oxide thin-film transistors with an inverse staggered structure and an SiO2 gate insulator

    Science.gov (United States)

    Park, Jae Chul; Lee, Ho-Nyeon

    2014-05-01

    We report the low-frequency noise (LFN) behavior of amorphous indium-gallium-zinc oxide thin-film transistors with an inverse staggered structure and an SiO2 gate insulator. The normalized noise power spectral density depended on channel length, L, with the form 1/L2, and on the gate bias voltage, VG, and threshold voltage, VTH, with the form 1/(VG - VTH)β where 1.5 < β < 2.1. In addition, the scattering constant α was less than 105 Ω. These results suggest that the contact resistance has a significant role in the LFN behavior and the charge-carrier density fluctuation is the dominant origin of LFN.

  13. Wool insulation

    Energy Technology Data Exchange (ETDEWEB)

    O`Shea, Angus

    1995-05-01

    Wool insulation usually comes in two forms, as loose fill or batts. The reliability of loose fill as an insulator, the thickness of batts and the wool`s vulnerability to insect and moth attack are considered to be problems. The purpose of this research was to create a commercial wool insulation product to overcome these limitations, at the same time withstanding the Australian and international standards for fire resistance. The project also considered the market potential of such a product with a view to commercialization. The loft or thickness problem was resolved by covering the wool with an oven baked adhesive. A fire retardant and anti-insect treatment was incorporated into the spray process to produce a viable product.

  14. Radiation Insulation

    Science.gov (United States)

    1995-01-01

    The Apollo and subsequent spacecraft have had highly effective radiation barriers; made of aluminized polymer film, they bar or let in heat to maintain consistent temperatures inside. Tech 2000, formerly Quantum International Corporation used the NASA technology in its insulating materials, Super "Q" Radiant Barrier, for home, industry and mobile applications. The insulation combines industrial aluminum foil overlaid around a core of another material, usually propylene or mylar. The outer layer reflects up to 97 percent of heat; the central layer creates a thermal break in the structure and thus allows low radiant energy emission. The Quantum Cool Wall, used in cars and trucks, takes up little space while providing superior insulation, thus reducing spoilage and costs. The panels can also dampen sound and engine, exhaust and solar heat.

  15. Topological insulators

    CERN Document Server

    Franz, Marcel

    2013-01-01

    Topological Insulators, volume six in the Contemporary Concepts of Condensed Matter Series, describes the recent revolution in condensed matter physics that occurred in our understanding of crystalline solids. The book chronicles the work done worldwide that led to these discoveries and provides the reader with a comprehensive overview of the field. Starting in 2004, theorists began to explore the effect of topology on the physics of band insulators, a field previously considered well understood. However, the inclusion of topology brings key new elements into this old field. Whereas it was

  16. Quantization of Hall Resistance at the Metallic Interface between an Oxide Insulator and SrTiO3

    DEFF Research Database (Denmark)

    Trier, Felix; Prawiroatmodjo, Guenevere E. D. K.; Zhong, Zhicheng;

    2016-01-01

    The two-dimensional metal forming at the interface between an oxide insulatorand SrTiO3 provides new opportunities for oxide electronics. However, the quantum Hall effect, one of the most fascinating effects of electrons confined in two dimensions, remains underexplored at these complex oxide...... heterointerfaces. Here, we report the experimental observation of quantized Hall resistance in a SrTiO3 heterointerface based on the modulation-doped amorphous-LaAlO3/SrTiO3 heterostructure, which exhibits both highelectron mobility exceeding 10, 000 cm2/V s and low carrier density on the order of ~1012 cm-2....... Along with unambiguous Shubnikov-de Haasoscillations, the spacing of the quantized Hall resistance suggests that the interface is comprised of a single quantum well with ten parallel conducting two-dimensional subbands. This provides new insight into the electronic structure of conducting oxide...

  17. A first principles investigation of electron transfer between Fe(II) and U(VI) on insulating Al- vs. semiconducting Fe-oxide surfaces via the proximity effect

    Science.gov (United States)

    Taylor, S. D.; Marcano, M. C.; Becker, U.

    2017-01-01

    (II) to travel through the hematite surface and reach U(VI). The progression and extent of ET occurring on the semiconducting hematite (0 0 1) surface via the proximity effect depends on the electronic properties of the surface. ET between the spatially separated U(VI) and Fe(II) occurs most readily when orbitals between the Fe and U adsorbates overlap with those of neighboring O and Fe ions at the hematite surface, as shown by calculations without the Hubbard U correction. Analyses of the spins densities confirm that the U and Fe adsorbates were reduced and oxidized, respectively, (acquiring 0.33 μB and 0.11-0.20 μB, respectively), while Fe cations at the hematite surface were reduced (losing ⩽0.6 μB). If electrons are highly localized, the amount of orbital mixing and electronic coupling through the hematite surface decreases and in turn leads to a lower degree of spin transfer, as predicted by calculations with the Hubbard U correction. Thus, the proximity effect is a potential mechanism on semiconducting surfaces facilitating surface-mediated redox reactions, although its significance varies depending on the electronic properties and subsequent charge-carrying ability of the surface. These results provide insight into ET pathways and mechanisms on insulating Al- and semiconducting Fe oxide surfaces influencing the reduction U(VI) by Fe(II) that may subsequently limit uranium's transport in the subsurface.

  18. Translucent Insulation

    DEFF Research Database (Denmark)

    Rahbek, Jens Eg

    1998-01-01

    Two new types of translucent materials are presented. One is translucent fiber insulation and the other type is a new type of hony-comb made of Celulose-acetat. Data for the materials and calculations of energy savings when using the materials in building envelopes are presented....

  19. Consistent LDA' + DMFT approach to the electronic structure of transition metal oxides: Charge transfer insulators and correlated metals

    Energy Technology Data Exchange (ETDEWEB)

    Nekrasov, I. A., E-mail: nekrasov@iep.uran.ru; Pavlov, N. S.; Sadovskii, M. V. [Russian Academy of Sciences, Institute for Electrophysics, Ural Branch (Russian Federation)

    2013-04-15

    We discuss the recently proposed LDA' + DMFT approach providing a consistent parameter-free treatment of the so-called double counting problem arising within the LDA + DMFT hybrid computational method for realistic strongly correlated materials. In this approach, the local exchange-correlation portion of the electron-electron interaction is excluded from self-consistent LDA calculations for strongly correlated electronic shells, e.g., d-states of transition metal compounds. Then, the corresponding double-counting term in the LDA' + DMFT Hamiltonian is consistently set in the local Hartree (fully localized limit, FLL) form of the Hubbard model interaction term. We present the results of extensive LDA' + DMFT calculations of densities of states, spectral densities, and optical conductivity for most typical representatives of two wide classes of strongly correlated systems in the paramagnetic phase: charge transfer insulators (MnO, CoO, and NiO) and strongly correlated metals (SrVO{sub 3} and Sr{sub 2}RuO{sub 4}). It is shown that for NiO and CoO systems, the LDA' + DMFT approach qualitatively improves the conventional LDA + DMFT results with the FLL type of double counting, where CoO and NiO were obtained to be metals. Our calculations also include transition-metal 4s-states located near the Fermi level, missed in previous LDA + DMFT studies of these monoxides. General agreement with optical and the X-ray experiments is obtained. For strongly correlated metals, the LDA' + DMFT results agree well with the earlier LDA + DMFT calculations and existing experiments. However, in general, LDA' + DMFT results give better quantitative agreement with experimental data for band gap sizes and oxygen-state positions compared to the conventional LDA + DMFT method.

  20. Consistent LDA' + DMFT approach to the electronic structure of transition metal oxides: Charge transfer insulators and correlated metals

    Science.gov (United States)

    Nekrasov, I. A.; Pavlov, N. S.; Sadovskii, M. V.

    2013-04-01

    We discuss the recently proposed LDA' + DMFT approach providing a consistent parameter-free treatment of the so-called double counting problem arising within the LDA + DMFT hybrid computational method for realistic strongly correlated materials. In this approach, the local exchange-correlation portion of the electron-electron interaction is excluded from self-consistent LDA calculations for strongly correlated electronic shells, e.g., d-states of transition metal compounds. Then, the corresponding double-counting term in the LDA' + DMFT Hamiltonian is consistently set in the local Hartree (fully localized limit, FLL) form of the Hubbard model interaction term. We present the results of extensive LDA' + DMFT calculations of densities of states, spectral densities, and optical conductivity for most typical representatives of two wide classes of strongly correlated systems in the paramagnetic phase: charge transfer insulators (MnO, CoO, and NiO) and strongly correlated metals (SrVO3 and Sr2RuO4). It is shown that for NiO and CoO systems, the LDA' + DMFT approach qualitatively improves the conventional LDA + DMFT results with the FLL type of double counting, where CoO and NiO were obtained to be metals. Our calculations also include transition-metal 4 s-states located near the Fermi level, missed in previous LDA + DMFT studies of these monoxides. General agreement with optical and the X-ray experiments is obtained. For strongly correlated metals, the LDA' + DMFT results agree well with the earlier LDA + DMFT calculations and existing experiments. However, in general, LDA' + DMFT results give better quantitative agreement with experimental data for band gap sizes and oxygen-state positions compared to the conventional LDA + DMFT method.

  1. Enhanced rectifying response from metal-insulator-insulator-metal junctions

    Science.gov (United States)

    Maraghechi, P.; Foroughi-Abari, A.; Cadien, K.; Elezzabi, A. Y.

    2011-12-01

    We present on a metal-insulator-insulator-metal quantum electronic tunneling devices suitable for high speed rectifiers. Through the introduction of double oxide layer between similar metallic electrodes, a cascaded potential barrier is formed which alters the electron tunneling mechanism at forward versus the reverse bias. The cascaded potential barrier engineering manifests itself in both a highly nonlinear and asymmetric I-V junction characteristic. It is envisioned that high speed rectifiers and mixers having extraordinary nonlinearity can be realized through the incorporation of the cascaded potential barrier architecture and dissimilar metallic electrodes.

  2. Ultra-low power high temperature and radiation hard complementary metal-oxide-semiconductor (CMOS) silicon-on-insulator (SOI) voltage reference.

    Science.gov (United States)

    Boufouss, El Hafed; Francis, Laurent A; Kilchytska, Valeriya; Gérard, Pierre; Simon, Pascal; Flandre, Denis

    2013-12-13

    This paper presents an ultra-low power CMOS voltage reference circuit which is robust under biomedical extreme conditions, such as high temperature and high total ionized dose (TID) radiation. To achieve such performances, the voltage reference is designed in a suitable 130 nm Silicon-on-Insulator (SOI) industrial technology and is optimized to work in the subthreshold regime of the transistors. The design simulations have been performed over the temperature range of -40-200 °C and for different process corners. Robustness to radiation was simulated using custom model parameters including TID effects, such as mobilities and threshold voltages degradation. The proposed circuit has been tested up to high total radiation dose, i.e., 1 Mrad (Si) performed at three different temperatures (room temperature, 100 °C and 200 °C). The maximum drift of the reference voltage V(REF) depends on the considered temperature and on radiation dose; however, it remains lower than 10% of the mean value of 1.5 V. The typical power dissipation at 2.5 V supply voltage is about 20 μW at room temperature and only 75 μW at a high temperature of 200 °C. To understand the effects caused by the combination of high total ionizing dose and temperature on such voltage reference, the threshold voltages of the used SOI MOSFETs were extracted under different conditions. The evolution of V(REF) and power consumption with temperature and radiation dose can then be explained in terms of the different balance between fixed oxide charge and interface states build-up. The total occupied area including pad-ring is less than 0.09 mm2.

  3. Ultra-Low Power High Temperature and Radiation Hard Complementary Metal-Oxide-Semiconductor (CMOS Silicon-on-Insulator (SOI Voltage Reference

    Directory of Open Access Journals (Sweden)

    El Hafed Boufouss

    2013-12-01

    Full Text Available This paper presents an ultra-low power CMOS voltage reference circuit which is robust under biomedical extreme conditions, such as high temperature and high total ionized dose (TID radiation. To achieve such performances, the voltage reference is designed in a suitable 130 nm Silicon-on-Insulator (SOI industrial technology and is optimized to work in the subthreshold regime of the transistors. The design simulations have been performed over the temperature range of -40–200 °C and for different process corners. Robustness to radiation was simulated using custom model parameters including TID effects, such as mobilities and threshold voltages degradation. The proposed circuit has been tested up to high total radiation dose, i.e., 1 Mrad (Si performed at three different temperatures (room temperature, 100 °C and 200 °C. The maximum drift of the reference voltage VREF depends on the considered temperature and on radiation dose; however, it remains lower than 10% of the mean value of 1.5 V. The typical power dissipation at 2.5 V supply voltage is about 20 μW at room temperature and only 75 μ W at a high temperature of 200 °C. To understand the effects caused by the combination of high total ionizing dose and temperature on such voltage reference, the threshold voltages of the used SOI MOSFETs were extracted under different conditions. The evolution of VREF and power consumption with temperature and radiation dose can then be explained in terms of the different balance between fixed oxide charge and interface states build-up. The total occupied area including pad-ring is less than 0.09 mm2.

  4. Spin Hall effect induced spin transfer through an insulator

    Science.gov (United States)

    Chen, Wei; Sigrist, Manfred; Manske, Dirk

    2016-09-01

    When charge current passes through a normal metal that exhibits the spin Hall effect, spin accumulates at the edge of the sample in the transverse direction. We predict that this spin accumulation, or spin voltage, enables quantum tunneling of spin through an insulator or vacuum to reach a ferromagnet without transferring charge. In a normal metal/insulator/ferromagnetic insulator trilayer (such as Pt/oxide/YIG), the quantum tunneling explains the spin-transfer torque and spin pumping that exponentially decay with the thickness of the insulator. In a normal metal/insulator/ferromagnetic metal trilayer (such as Pt/oxide/Co), the spin transfer in general does not decay monotonically with the thickness of the insulator. Combining with the spin Hall magnetoresistance, this tunneling mechanism points to the possibility of a tunneling spectroscopy that can probe the magnon density of states of a ferromagnetic insulator in an all-electrical and noninvasive manner.

  5. AlGaN/GaN metal-insulator-semiconductor high-electron mobility transistors with high on/off current ratio of over 5 × 1010 achieved by ozone pretreatment and using ozone oxidant for Al2O3 gate insulator

    Science.gov (United States)

    Tokuda, Hirokuni; Asubar, Joel T.; Kuzuhara, Masaaki

    2016-12-01

    This letter describes DC characteristics of AlGaN/GaN metal-insulator-semiconductor high-electron-mobility transistors (MIS-HEMTs) with Al2O3 deposited by atomic layer deposition (ALD) as gate dielectric. Comparison was made for the samples deposited using ozone (O3) or water as oxidant. The effect of pretreatment, where O3 was solely supplied prior to depositing Al2O3, was also investigated. The MIS-HEMT with O3 pretreatment and Al2O3 gate dielectric deposited using O3 as the oxidant exhibited the most desirable characteristics with an excellent high on/off current ratio of 7.1 × 1010, and a low sub-threshold swing (SS) of 73 mV/dec.

  6. Near-Field Nanoscopy of Metal-Insulator Phase Transitions Towards Synthesis of Novel Correlated Transition Metal Oxides and Their Interaction with Plasmon Resonances

    Science.gov (United States)

    2016-01-05

    Nanolayer and two-dimensional (2D) materials 9 such as grapheme 10, 11, boron nitride 9, 12, transition metal dichalcogenides 9, 13-16 (TMDCs), and... plasma frequency ≈ 0.4pω eV, carrier density . 11 11 1 10 cm−≈ ×n and the thickness of the surface metallic layer of ~ 1 nm . We have also...observed similar behavior in other nanolayer semiconductors such as TMDC MoS2 and topological insulator Bi2Te3 but not in insulators such as boron nitride

  7. Little-Parks oscillations in an insulator.

    Science.gov (United States)

    Kopnov, G; Cohen, O; Ovadia, M; Lee, K Hong; Wong, C C; Shahar, D

    2012-10-19

    We present the results of a magnetoresistance study of the disorder-induced superconductor-insulator transition in an amorphous indium-oxide thin film patterned by a nanoscale periodic array of holes. We observed Little-Parks-like oscillations over our entire range of disorder spanning the transition. The period of oscillations was unchanged and corresponded to the superconducting flux quantum in the superconducting as well as in the insulating phases. Our results provide direct evidence for electron pairing in the insulator bordering with superconductivity.

  8. Insulated Fiber Brush.

    Science.gov (United States)

    An insulated-strand fiber brush is provided for a DC motor /generator. The brush is comprised of a plurality of fiber segments which are insulated from one another near the contact surface of a rotor bar. In one embodiment, insulating spacers are fixed to a brush assembly and wear with the fibers, and in another embodiment insulation is provided by a separate shell. (Author)

  9. Ultra-Low Power High Temperature and Radiation Hard Complementary Metal-Oxide-Semiconductor (CMOS) Silicon-on-Insulator (SOI) Voltage Reference

    OpenAIRE

    El Hafed Boufouss; Francis, Laurent A.; Valeriya Kilchytska; Pierre Gérard; Pascal Simon; Denis Flandre

    2013-01-01

    This paper presents an ultra-low power CMOS voltage reference circuit which is robust under biomedical extreme conditions, such as high temperature and high total ionized dose (TID) radiation. To achieve such performances, the voltage reference is designed in a suitable 130 nm Silicon-on-Insulator (SOI) industrial technology and is optimized to work in the subthreshold regime of the transistors. The design simulations have been performed over the temperature range of -40–200 °C and for differ...

  10. Epitaxial silicon and germanium on buried insulator heterostructures and devices

    Science.gov (United States)

    Bojarczuk, N. A.; Copel, M.; Guha, S.; Narayanan, V.; Preisler, E. J.; Ross, F. M.; Shang, H.

    2003-12-01

    Future microelectronics will be based upon silicon or germanium-on-insulator technologies and will require an ultrathin (<10 nm), flat silicon or germanium device layer to reside upon an insulating oxide grown on a silicon wafer. The most convenient means of accomplishing this is by epitaxially growing the entire structure on a silicon substrate. This requires a high quality crystalline oxide and the ability to epitaxially grow two dimensional, single crystal films of silicon or germanium on top of this oxide. We describe a method based upon molecular beam epitaxy and solid-phase epitaxy to make such structures and demonstrate working field-effect transistors on germanium-on-insulator layers.

  11. Evidence for a Finite-Temperature Insulator.

    Science.gov (United States)

    Ovadia, M; Kalok, D; Tamir, I; Mitra, S; Sacépé, B; Shahar, D

    2015-08-27

    In superconductors the zero-resistance current-flow is protected from dissipation at finite temperatures (T) by virtue of the short-circuit condition maintained by the electrons that remain in the condensed state. The recently suggested finite-T insulator and the "superinsulating" phase are different because any residual mechanism of conduction will eventually become dominant as the finite-T insulator sets-in. If the residual conduction is small it may be possible to observe the transition to these intriguing states. We show that the conductivity of the high magnetic-field insulator terminating superconductivity in amorphous indium-oxide exhibits an abrupt drop, and seem to approach a zero conductance at T insulator.

  12. Research on the Insulating Property of PE Filled by Nano Metal Oxides%纳米金属氧化物填充PE复合材料隔热性能的研究

    Institute of Scientific and Technical Information of China (English)

    赵文隆; 张清松; 吴智华

    2011-01-01

    This paper introduced the relationship between insulating property and light reflective property of nano metal oxides TiO2, ZrO2, ZnO and Fe2O3 filled PE composites. In this research, for the white fillers like TiO2, ZrO2, ZnO, the better the reflective property of the nano metal oxide filler was, the better the insulating property of the composite was. For the colored filler like Fe2O3, the insulating property of its composite was bad and seemed to have no relationship with the reflective property. It was because the way that the nano metal oxides insulating heat was reflecting to shield the thermal radiation. The material with the high reflectivity can strongly reflect the solar radiation in the wavelength between 0. 4 ~ 2. 5 μm and keep the low temperature of its surface. The higher the reflectivity was, the more absorbed heat can be radiated in the wavelength between 2. 5 ~ 15 μm. The colored Fe2O3/PE composite can strongly absorb the infrared and ultraviolet rays to make the temperature of the composite itself increased a lot which lead thermal conductivity to become the main way of warming. That was the reason for the bad insulating property of Fe2O3/PE composite.%研究了纳米金属氧化物填料TiO2、ZrO2、ZnO和Fe2O3填充PE复合材料的隔热性能与光反射性能的关系.结果表明,对于白色的TiO2、ZrO2、ZnO填料而言,光反射性能越好的纳米金属氧化物,填充的PE复合材料隔热性能越好;对于有色的Fe2O3填料,其复合材料的隔热性能与光反射性能似乎关系不大,隔热性较差.通过对纳米金属氧化物填料隔热机理的分析,认为这是由于纳米金属氧化物填料的隔热方式为反射隔热屏蔽热辐射,反射率高的材料,在0.4~2.5 μm的范围内反射太阳辐射能的功能强,表面温度低,反射率越高,在2.5~15 μm的辐射波段范围内,会辐射出更多所吸收的热量;而有色的Fe2O3/PE复合材料会强烈地吸收红外线和紫外线,使复合

  13. Lifshitz metal–insulator transition induced by the all-in/all-out magnetic order in the pyrochlore oxide Cd{sub 2}Os{sub 2}O{sub 7}

    Energy Technology Data Exchange (ETDEWEB)

    Hiroi, Z., E-mail: hiroi@issp.u-tokyo.ac.jp; Hirose, T.; Nagashima, I.; Okamoto, Y. [Institute for Solid State Physics, University of Tokyo, Kashiwa, Chiba 277–8581 (Japan); Yamaura, J. [Materials Research Center for Element Strategy, Tokyo Institute of Technology, Yokohama, Kanagawa 226–8503 (Japan)

    2015-04-01

    We investigate the metal–insulator transition (MIT) of the osmium pyrochlore oxide Cd{sub 2}Os{sub 2}O{sub 7} through transport and magnetization measurements. The MIT and a magnetic transition to the all-in/all-out (AIAO) order occur simultaneously at 227 K. We propose a mechanism based on a Lifshitz transition induced by the AIAO magnetic order probably via strong spin–orbit couplings in the specific semimetallic band structure. It is suggested, moreover, that two observed puzzles, a finite conductivity near T = 0 and an emergence of weak ferromagnetic moments, are not bulk properties but originate at magnetic domain walls between two kinds of AIAO domains.

  14. Strongly Correlated Topological Insulators

    Science.gov (United States)

    2016-02-03

    Research Triangle Park , NC 27709-2211 Condensed Matter, Topological Phases of Matter REPORT DOCUMENTATION PAGE 11. SPONSOR/MONITOR’S REPORT NUMBER(S...Strongly Correlated Topological Insulators In the past year, the grant was used for work in the field of topological phases, with emphasis on finding...surface of topological insulators. In the past 3 years, we have started a new direction, that of fractional topological insulators. These are materials

  15. Properties of two-dimensional insulators: A DFT study of bimetallic oxide CrW2O9 clusters adsorption on MgO ultrathin films

    Science.gov (United States)

    Zhu, Jia; Zhang, Hui; Zhao, Ling; Xiong, Wei; Huang, Xin; Wang, Bin; Zhang, Yongfan

    2016-08-01

    Periodic density functional theory calculations have been performed to study the electronic properties of bimetallic oxide CrW2O9 clusters adsorbed on MgO/Ag(001) ultrathin films (activities with respect to that of pure W3O9 clusters. As a consequence, present results reveal that the adsorption of bimetallic oxide CrW2O9 clusters on the MgO/Ag(001) ultrathin films provide a new perspective to tune and modify the properties and chemical reactivity of bimetallic oxide adsorbates as a function of the thickness of the oxide films.

  16. Composite Flexible Blanket Insulation

    Science.gov (United States)

    Kourtides, Demetrius A. (Inventor); Pitts, William C. (Inventor); Goldstein, Howard E. (Inventor); Sawko, Paul M. (Inventor)

    1991-01-01

    Composite flexible multilayer insulation systems (MLI) were evaluated for thermal performance and compared with the currently used fibrous silica (baseline) insulation system. The systems described are multilayer insulations consisting of alternating layers of metal foil and scrim ceramic cloth or vacuum metallized polymeric films quilted together using ceramic thread. A silicon carbide thread for use in the quilting and the method of making it are also described. These systems are useful in providing lightweight insulation for a variety of uses, particularly on the surface of aerospace vehicles subject to very high temperatures during flight.

  17. Plasmonics in Topological Insulators

    Directory of Open Access Journals (Sweden)

    Yi-Ping Lai

    2014-04-01

    Full Text Available With strong spin-orbit coupling, topological insulators have an insulating bulk state, characterized by a band gap, and a conducting surface state, characterized by a Dirac cone. Plasmons in topological insulators show high frequency-tunability in the mid-infrared and terahertz spectral regions with transverse spin oscillations, also called “spin-plasmons”. This paper presents a discussion and review of the developments in this field from the fundamental theory of plasmons in bulk, thin-film, and surface-magnetized topological insulators to the techniques of plasmon excitation and future applications.

  18. 复合绝缘材料热氧老化中局部放电特性的实验研究%Partial Discharge Characteristics Study of Composite Insulating Materials in Thermo Oxidative Ageing

    Institute of Scientific and Technical Information of China (English)

    高山; 贾勇勇; 杨景刚; 陶风波; 董金龙; 张国钢

    2016-01-01

    The partial discharge (PD) characteristics of SMC, BMC, GPO-3, and epoxy resin composite material before and after thermal oxidative ageing were studied. The dielectrical properties and partial discharge characteristics of four composite insulating materials before and after thermal oxidative ageing under different frequency voltages were compared and analyzed. The results show that with the increase of applied voltage, when the voltage attains or exceeds the partial discharge inception voltage, the four composite insulation materials show different PD characteristics and PRPD spectra evolution patterns. After ageing, the partial discharge inception voltage of four materials increases, and the discharge amplitude of PD varies with the increase of applied voltage, but the PD phase and discharge density change little. The common and difference of partial discharge of different materials under different operating conditions should be considered in the evaluation of insulating properties of materials.%对SMC、BMC、GPO-3、环氧树脂复合材料在热氧老化前后的局部放电特性进行研究,对比分析未老化和经过热氧老化的4种复合绝缘材料在不同工频电压下的介电特性和局部放电特性.结果表明:随着外施电压的升高,当达到或超过材料的局部放电起始电压后,4种复合绝缘材料呈现不同的局部放电特性和PRPD谱图演变规律;经过老化后4种材料的起始局部放电电压均有所提高,局部放电量随外施电压升高而呈现不同的变化规律,放电相位和放电密度变化较小.对于材料的绝缘性能评估应综合考虑不同材料在不同运行条件下局部放电的共性和差异.

  19. A New Structure of Silicon-on-Insulator Metal-Oxide-Semiconductor Field Effect Transistor to Suppress the Floating Body Effect

    Institute of Scientific and Technical Information of China (English)

    朱鸣; 林青; 张正选; 林成鲁

    2003-01-01

    Considering that the silicon-on-insulator (SOI) devices have an inherent floating body effect, which may cause substantial influences in the performance of SOI device and circuit, we propose a novel device structure to suppress the floating body effect. In the new structure there is a buried p+ region under the n+ source and that region is extended to outside of the source, and this additional p+ region provides a path for accumulated holes to flow out of the body. Numerical simulations were carried out with Medici, and the output characteristics and gate characteristics were compared with those of conventional SOI counterparts. The simulated results show the suppression of floating body effect in the novel SOI device as expected.

  20. Translucent insulating building envelope

    DEFF Research Database (Denmark)

    Rahbek, Jens Eg

    1997-01-01

    A new type of translucent insulating material has been tested. This material is made of Celulose-Acetat and have a honey-comb structure. The material has a high solar transmittance and is highly insulating. The material is relatively cheap to produce. Danish Title: Translucent isolerende klimaskærm....

  1. Translucent insulating building envelope

    DEFF Research Database (Denmark)

    Rahbek, Jens Eg

    1997-01-01

    A new type of translucent insulating material has been tested. This material is made of Celulose-Acetat and have a honey-comb structure. The material has a high solar transmittance and is highly insulating. The material is relatively cheap to produce. Danish Title: Translucent isolerende klimaskærm....

  2. Sound Insulation between Dwellings

    DEFF Research Database (Denmark)

    Rasmussen, Birgit

    2011-01-01

    Regulatory sound insulation requirements for dwellings exist in more than 30 countries in Europe. In some countries, requirements have existed since the 1950s. Findings from comparative studies show that sound insulation descriptors and requirements represent a high degree of diversity...... and initiate – where needed – improvement of sound insulation of new and existing dwellings in Europe to the benefit of the inhabitants and the society. A European COST Action TU0901 "Integrating and Harmonizing Sound Insulation Aspects in Sustainable Urban Housing Constructions", has been established and runs...... 2009-2013. The main objectives of TU0901 are to prepare proposals for harmonized sound insulation descriptors and for a European sound classification scheme with a number of quality classes for dwellings. Findings from the studies provide input for the discussions in COST TU0901. Data collected from 24...

  3. Sound insulation between dwellings

    DEFF Research Database (Denmark)

    Rasmussen, Birgit

    2011-01-01

    Regulatory sound insulation requirements for dwellings exist in more than 30 countries in Europe. In some countries, requirements have existed since the 1950s. Findings from comparative studies show that sound insulation descriptors and requirements represent a high degree of diversity...... and initiate – where needed – improvement of sound insulation of new and existing dwellings in Europe to the benefit of the inhabitants and the society. A European COST Action TU0901 "Integrating and Harmonizing Sound Insulation Aspects in Sustainable Urban Housing Constructions", has been established and runs...... 2009-2013. The main objectives of TU0901 are to prepare proposals for harmonized sound insulation descriptors and for a European sound classification scheme with a number of quality classes for dwellings. Findings from the studies provide input for the discussions in COST TU0901. Data collected from 24...

  4. Influence of the charge trap density distribution in a gate insulator on the positive-bias stress instability of amorphous indium-gallium-zinc oxide thin-film transistors

    Science.gov (United States)

    Kim, Eungtaek; Kim, Choong-Ki; Lee, Myung Keun; Bang, Tewook; Choi, Yang-Kyu; Park, Sang-Hee Ko; Choi, Kyung Cheol

    2016-05-01

    We investigated the positive-bias stress (PBS) instability of thin film transistors (TFTs) composed of different types of first-gate insulators, which serve as a protection layer of the active surface. Two different deposition methods, i.e., the thermal atomic layer deposition (THALD) and plasma-enhanced ALD (PEALD) of Al2O3, were applied for the deposition of the first GI. When THALD was used to deposit the GI, amorphous indium-gallium-zinc oxide (a-IGZO) TFTs showed superior stability characteristics under PBS. For example, the threshold voltage shift (ΔVth) was 0 V even after a PBS time (tstress) of 3000 s under a gate voltage (VG) condition of 5 V (with an electrical field of 1.25 MV/cm). On the other hand, when the first GI was deposited by PEALD, the ΔVth value of a-IGZO TFTs was 0.82 V after undergoing an identical amount of PBS. In order to interpret the disparate ΔVth values resulting from PBS quantitatively, the average oxide charge trap density (NT) in the GI and its spatial distribution were investigated through low-frequency noise characterizations. A higher NT resulted during in the PEALD type GI than in the THALD case. Specifically, the PEALD process on a-IGZO layer surface led to an increasing trend of NT near the GI/a-IGZO interface compared to bulk GI owing to oxygen plasma damage on the a-IGZO surface.

  5. Synthetic beta-K(0.33)V2O5 nanorods: a metal-insulator transition in vanadium oxide bronze.

    Science.gov (United States)

    Zhang, Xiaodong; Yan, Wensheng; Xie, Yi

    2011-12-02

    We found a linear relationship between the metal-insulator transition (MIT) temperature and the A(+) ionic radius of the beta-A(0.33)V(2)O(5) bronze family, leading our attention to beta-K(0.33)V(2)O(5) which has been neglected for a long time. We have introduced a facile hydrothermal method to obtain the single-crystalline beta-K(0.33)V(2)O(5) nanorods. As expected, both the temperature-dependence of the resistivity and magnetization demonstrated MITs at about 72 K for beta-K(0.33)V(2)O(5), thus matching well with the linear relationship described above. The beta-K(0.33)V(2)O(5) was assigned as a new member of the beta-A(0.33)V(2)O(5) bronze family for their similar crystal and electronic structures and their MIT property; this addition enriches the beta-A(0.33)V(2)O(5) bronze family.

  6. Microsphere Insulation Panels

    Science.gov (United States)

    Mohling, R.; Allen, M.; Baumgartner, R.

    2006-01-01

    Microsphere insulation panels (MIPs) have been developed as lightweight, longlasting replacements for the foam and vacuum-jacketed systems heretofore used for thermally insulating cryogenic vessels and transfer ducts. The microsphere core material of a typical MIP consists of hollow glass bubbles, which have a combination of advantageous mechanical, chemical, and thermal-insulation properties heretofore available only separately in different materials. In particular, a core filling of glass microspheres has high crush strength and low density, is noncombustible, and performs well in soft vacuum.

  7. Insulation fact sheet

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-08-01

    Electricity bills, oil bills, gas bills - all homeowners pay for one or more of these utilities, and wish they paid less. Often many of us do not really know how to control or reduce our utility bills. We resign ourselves to high bills because we think that is the price we have to pay for a comfortable home. We encourage our children to turn off the lights and appliances, but may not recognize the benefits of insulating the attic. This publication provides facts relative to home insulation. It discusses where to insulate, what products to use, the decision making process, installation options, and sources of additional information.

  8. Insulated Piston Heads for Diesel Engines

    Science.gov (United States)

    Tricoire, A.; Kjellman, B.; Wigren, J.; Vanvolsem, M.; Aixala, L.

    2009-06-01

    Widely studied in the 1980s, the insulation of pistons in engines aimed at reducing the heat losses and thus increasing the indicated efficiency. However, those studies stopped in the beginning of the 1990s because of NO x emission legislation and also because of lower oil prices. Currently, with the improvement of exhaust after treatment systems (diesel particulate filter, selective catalytic reduction, and diesel oxidation catalyst) and engine technologies (exhaust gas recirculation), there are more trade-offs for NO x reduction. In addition, the fast rise of the oil prices tends to lead back to insulation technologies in order to save fuel. A 1 mm thick plasma sprayed thermal barrier coating with a graded transition between the topcoat and the bondcoat was deposited on top of a serial piston for heavy-duty truck engines. The effects of the insulated pistons on the engine performance are also discussed, and the coating microstructure is analyzed after engine test.

  9. Lifetime estimation methods in power transformer insulation

    Directory of Open Access Journals (Sweden)

    Mohammad Ali Taghikhani

    2012-10-01

    Full Text Available Mineral oil in the power transformer has an important role in the cooling, insulation aging and chemical reactions such as oxidation. Oil temperature increases will cause quality loss. The oil should be regularly control in necessary time. Studies have been done on power transformers oils that are used in different age in Iranian power grid to identify the true relationship between age and other characteristics of power transformer oil. In this paper the first method to estimate the life of power transformer insulation (oil is based on Arrhenius law. The Arrhenius law can provide loss of power transformer oil quality and estimates remaining life. The second method that is studies to estimate the life of power transformer is the paper insulation life prediction at temperature160 ° C.

  10. Topological insulators: Engineered heterostructures

    Science.gov (United States)

    Hesjedal, Thorsten; Chen, Yulin

    2017-01-01

    The combination of topological properties and magnetic order can lead to new quantum states and exotic physical phenomena. In particular, the coupling between topological insulators and antiferromagnets enables magnetic and electronic structural engineering.

  11. Gas insulated substations

    CERN Document Server

    2014-01-01

    This book provides an overview on the particular development steps of gas insulated high-voltage switchgear, and is based on the information given with the editor's tutorial. The theory is kept low only as much as it is needed to understand gas insulated technology, with the main focus of the book being on delivering practical application knowledge. It discusses some introductory and advanced aspects in the meaning of applications. The start of the book presents the theory of Gas Insulated Technology, and outlines reliability, design, safety, grounding and bonding, and factors for choosing GIS. The third chapter presents the technology, covering the following in detail: manufacturing, specification, instrument transformers, Gas Insulated Bus, and the assembly process. Next, the book goes into control and monitoring, which covers local control cabinet, bay controller, control schemes, and digital communication. Testing is explained in the middle of the book before installation and energization. Importantly, ...

  12. Repairing ceramic insulating tiles

    Science.gov (United States)

    Dunn, B. R.; Laymance, E. L.

    1980-01-01

    Fused-silica tiles containing large voids or gauges are repaired without adhesives by plug insertion method. Tiles are useful in conduits for high-temperature gases, in furnaces, and in other applications involving heat insulation.

  13. Smoldering combustion hazards of thermal insulation materials

    Energy Technology Data Exchange (ETDEWEB)

    Ohlemiller, T.J.; Rogers, F.E.

    1980-07-01

    Work on the smolder ignitability in cellulosic insulation and on thermal analytical characterization of the oxidation of this material is presented. Thermal analysis (TGA and DSC) shows that both retarded and unretarded cellulosic insulation oxidizes in two overall stages, both of which are exothermic. The second stage (oxidation of the char left as a residue of the first stage) is much more energetic on a unit mass basis than the first. However, kinetics and a sufficient exothermicity make the first stage responsible for ignition in most realistic circumstances. Existing smolder retardants such as boric acid have their major effect on the kinetics of the second oxidation stage and thus produce only a rather small (20/sup 0/C) increase in smolder ignition temperature. Several simplified analogs of attic insulations have been tested to determine the variability of minimum smolder ignition temperature. These employed planar or tubular constant temperature heat sources in a thermal environment quite similar to a realistic attic application. Go/no-go tests provided the borderline (minimum) ignition temperature for each configuration. The wide range (150/sup 0/C) of minimum ignition temperatures confirmed the predominant dependence of smolder ignition on heat flow geometry. Other factors (bulk density, retardants) produced much less effect on ignitability.

  14. Analysis of the breakdown mechanism for an ultra high voltage high-side thin layer silicon-on-insulator p-channel low-density metal-oxide semiconductor

    Institute of Scientific and Technical Information of China (English)

    Zhuang Xiang; Qiao Ming; Zhang Bo; Li Zhao-Ji

    2012-01-01

    This paper discusses the breakdown mechanism and proposes a new simulation and test method of breakdown voltage (BV) for an ultra-high-voltage (UHV) high-side thin layer silicon-on-insulator (SOI) p-channel low-density metaloxide semiconductor (LDMOS).Compared with the conventional simulation method,the new one is more accordant with the actual conditions of a device that can be used in the high voltage circuit.The BV of the SOI p-channel LDMOS can be properly represented and the effect of reduced bulk field can be revealed by employing the new simulation method.Simulation results show that the off-state (on-state) BV of the SOI p-channel LDMOS can reach 741 (620) V in the 3-μm-thick buried oxide layer,50-un-length drift region,and at -400 V back-gate voltage,enabling the device to be used in a 400 V UHV integrated circuit.

  15. Influence of the charge trap density distribution in a gate insulator on the positive-bias stress instability of amorphous indium-gallium-zinc oxide thin-film transistors

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Eungtaek; Kim, Choong-Ki; Lee, Myung Keun; Bang, Tewook; Choi, Yang-Kyu; Choi, Kyung Cheol, E-mail: shkp@kaist.ac.kr, E-mail: kyungcc@kaist.ac.kr [School of Electrical Engineering, KAIST, Daejeon 34141 (Korea, Republic of); Park, Sang-Hee Ko, E-mail: shkp@kaist.ac.kr, E-mail: kyungcc@kaist.ac.kr [Department of Material Science and Engineering, KAIST, Daejeon 34141 (Korea, Republic of)

    2016-05-02

    We investigated the positive-bias stress (PBS) instability of thin film transistors (TFTs) composed of different types of first-gate insulators, which serve as a protection layer of the active surface. Two different deposition methods, i.e., the thermal atomic layer deposition (THALD) and plasma-enhanced ALD (PEALD) of Al{sub 2}O{sub 3}, were applied for the deposition of the first GI. When THALD was used to deposit the GI, amorphous indium-gallium-zinc oxide (a-IGZO) TFTs showed superior stability characteristics under PBS. For example, the threshold voltage shift (ΔV{sub th}) was 0 V even after a PBS time (t{sub stress}) of 3000 s under a gate voltage (V{sub G}) condition of 5 V (with an electrical field of 1.25 MV/cm). On the other hand, when the first GI was deposited by PEALD, the ΔV{sub th} value of a-IGZO TFTs was 0.82 V after undergoing an identical amount of PBS. In order to interpret the disparate ΔV{sub th} values resulting from PBS quantitatively, the average oxide charge trap density (N{sub T}) in the GI and its spatial distribution were investigated through low-frequency noise characterizations. A higher N{sub T} resulted during in the PEALD type GI than in the THALD case. Specifically, the PEALD process on a-IGZO layer surface led to an increasing trend of N{sub T} near the GI/a-IGZO interface compared to bulk GI owing to oxygen plasma damage on the a-IGZO surface.

  16. Scale dependent superconductor-insulator transition

    OpenAIRE

    D. Kowal; Ovadyahu, Z.

    2007-01-01

    We study the disorder driven superconductor to insulator transition in amorphous films of high carrier-concentration indium-oxide. Using thin films with various sizes and aspect ratios we show that the `critical' sheet-resistance $R_{{\\small \\square}}$ depends systematically on sample geometry; superconductivity disappears when $R_{{\\small \\square}}$ exceeds $\\approx6 $k$\\Omega$ in large samples. On the other hand, wide and sufficiently short samples of the same batch exhibit superconductivit...

  17. Lifetime estimation methods in power transformer insulation

    OpenAIRE

    Mohammad Ali Taghikhani

    2012-01-01

    Mineral oil in the power transformer has an important role in the cooling, insulation aging and chemical reactions such as oxidation. Oil temperature increases will cause quality loss. The oil should be regularly control in necessary time. Studies have been done on power transformers oils that are used in different age in Iranian power grid to identify the true relationship between age and other characteristics of power transformer oil. In this paper the first method to estimate the life of p...

  18. Thermal Insulation Strips Conserve Energy

    Science.gov (United States)

    2009-01-01

    Launching the space shuttle involves an interesting paradox: While the temperatures inside the shuttle s main engines climb higher than 6,000 F hot enough to boil iron for fuel, the engines use liquid hydrogen, the second coldest liquid on Earth after liquid helium. Maintained below 20 K (-423 F), the liquid hydrogen is contained in the shuttle s rust-colored external tank. The external tank also contains liquid oxygen (kept below a somewhat less chilly 90 K or -297 F) that combines with the hydrogen to create an explosive mixture that along with the shuttle s two, powdered aluminum-fueled solid rocket boosters allows the shuttle to escape Earth s gravity. The cryogenic temperatures of the main engines liquid fuel can cause ice, frost, or liquefied air to build up on the external tank and other parts of the numerous launch fueling systems, posing a possible debris risk when the ice breaks off during launch and causing difficulties in the transfer and control of these cryogenic liquid propellants. Keeping the fuel at the necessary ultra-cold temperatures while minimizing ice buildup and other safety hazards, as well as reducing the operational maintenance costs, has required NASA to explore innovative ways for providing superior thermal insulation systems. To address the challenge, the Agency turned to an insulating technology so effective that, even though it is mostly air, a thin sheet can prevent a blowtorch from igniting a match. Aerogels were invented in 1931 and demonstrate properties that make them the most extraordinary insulating materials known; a 1-inch-thick piece of aerogel provides the same insulation as layering 15 panes of glass with air pockets in between. Derived from silica, aluminum oxide, or carbon gels using a supercritical drying process - resulting in a composition of almost 99-percent air - aerogels are the world s lightest solid (among 15 other titles they hold in the Guinness World Records), can float indefinitely on water if treated to be

  19. Insulation materials. Cellulose fiber and expanded polystyrene insulations

    OpenAIRE

    Viladot Bel, Cèlia

    2017-01-01

    The main role of thermal insulation materials in a building envelope are to prevent heat loss and provide thermal comfort for a building's interior. The factor that characterizes an insulation material's effectiveness is its thermal conductivity λ (measured in W/mK). The lower a material's thermal conductivity, the more effective it is as an insulator. Traditional insulation materials include glass fibre, stone wool, expanded polystyrene, and polyurethane foam. While these materials are effic...

  20. Transcription Independent Insulation at TFIIIC-Dependent Insulators

    OpenAIRE

    Valenzuela, Lourdes; Dhillon, Namrita; Kamakaka, Rohinton T.

    2009-01-01

    Chromatin insulators separate active from repressed chromatin domains. In yeast the RNA pol III transcription machinery bound to tRNA genes function with histone acetylases and chromatin remodelers to restrict the spread of heterochromatin. Our results collectively demonstrate that binding of TFIIIC is necessary for insulation but binding of TFIIIB along with TFIIIC likely improves the probability of complex formation at an insulator. Insulation by this transcription factor occurs in the abse...

  1. Condensation in insulated homes

    Energy Technology Data Exchange (ETDEWEB)

    Wiley, R A

    1978-05-28

    A research proposal on condensation in insulated homes is presented. Information is provided on: justification for condensation control; previous work and present outlook (good vapor barrier, condensation and retrofit insulation, vapor barrier decreases condensation, brick-veneer walls, condensation in stress-skin panels, air-conditioned buildings, retrofitting for conservation, study on mobile homes, high indoor relative humidity, report on various homes); and procedure (after funding has been secured). Measures are briefly described on opening walls, testing measures, and retrofitting procedures. An extensive bibliography and additional informative citations are included. (MCW)

  2. Super insulating aerogel glazing

    DEFF Research Database (Denmark)

    Schultz, Jørgen Munthe; Jensen, Karsten Ingerslev; Kristiansen, Finn Harken

    2004-01-01

    Monolithic silica aerogel offers the possibility of combining super insulation and high solar energy transmittance, which has been the background for a previous and a current EU project on research and development of monolithic silica aerogel as transparent insulation in windows. Generally, windows...... form the weakest part of the thermal envelope with respect to heat loss coefficient, but on the other hand also play an important role for passive solar energy utilisation. For window orientations other than south, the net energy balance will be close to or below zero. However, the properties...

  3. Insulated ECG electrodes

    Science.gov (United States)

    Portnoy, W. M.; David, R. M.

    1973-01-01

    Insulated, capacitively coupled electrode does not require electrolyte paste for attachment. Other features of electrode include wide range of nontoxic material that may be employed for dielectric because of sputtering technique used. Also, electrode size is reduced because there is no need for external compensating networks with FET operational amplifier.

  4. Transcription independent insulation at TFIIIC-dependent insulators.

    Science.gov (United States)

    Valenzuela, Lourdes; Dhillon, Namrita; Kamakaka, Rohinton T

    2009-09-01

    Chromatin insulators separate active from repressed chromatin domains. In yeast the RNA pol III transcription machinery bound to tRNA genes function with histone acetylases and chromatin remodelers to restrict the spread of heterochromatin. Our results collectively demonstrate that binding of TFIIIC is necessary for insulation but binding of TFIIIB along with TFIIIC likely improves the probability of complex formation at an insulator. Insulation by this transcription factor occurs in the absence of RNA polymerase III or polymerase II but requires specific histone acetylases and chromatin remodelers. This analysis identifies a minimal set of factors required for insulation.

  5. Industrial thermal insulation: an assessment

    Energy Technology Data Exchange (ETDEWEB)

    Donnelly, R.G.; Tennery, V.J.; McElroy, D.L.; Godfrey, T.G.; Kolb, J.O.

    1976-03-01

    A large variety of thermal insulation materials is manufactured for application in various temperature ranges and environments. Additional and improved thermal insulation for steam systems is a key area with immediate energy conservation potential in several of the larger energy-consuming industries. Industrial thermal insulation technology was assessed by obtaining input from a variety of sources including insulation manufacturers, system designers, installers, users, consultants, measurement laboratories, open literature, and in-house knowledge. The assessment identified a number of factors relevant to insulation materials and usage that could contribute significantly to improved energy conservation.

  6. Insulator/metal phase transition and colossal magnetoresistance in holographic model

    CERN Document Server

    Cai, Rong-Gen

    2015-01-01

    We construct a gravity dual for insulator/metal phase transition and colossal magnetoresistance (CMR) effect found in some manganese oxides materials. The computations shows a remarkable magnetic-field-sensitive DC resistivity peak appearing at the Curie temperature, where an insulator/metal phase transition happens and the magnetoresistance is scaled with the square of field-induced magnetization. We find that metallic and insulating phases coexist below the Curie point and the relation with the electronic phase separation is discussed.

  7. Super insulating aerogel glazing

    DEFF Research Database (Denmark)

    Schultz, Jørgen Munthe; Jensen, Karsten Ingerslev; Kristiansen, Finn Harken

    2004-01-01

    Monolithic silica aerogel offers the possibility of combining super insulation and high solar energy transmittance, which has been the background for a previous and a current EU project on research and development of monolithic silica aerogel as transparent insulation in windows. Generally, windows...... form the weakest part of the thermal envelope with respect to heat loss coefficient, but on the other hand also play an important role for passive solar energy utilisation. For window orientations other than south, the net energy balance will be close to or below zero. However, the properties...... of aerogel glazing will allow for a positive net energy gain even for north facing vertical windows in a Danish climate during the heating season. This means that high quality daylight can be obtained even with additional energy gain. On behalf of the partners of the two EU projects, results related...

  8. Green insulation: hemp fibers

    Energy Technology Data Exchange (ETDEWEB)

    Anon

    2011-09-15

    Indian hemp (Cannabis indica) is known for its psychotropic values and it is banned in most countries. However, industrial hemp (Cannabis sativa) is known for its tough fibers. Several manufactures in Europe including, small niche players, have been marketing hemp insulation products for several years. Hemp is a low environmental impact material. Neither herbicide nor pesticide is used during the growth of hemp. The fibers are extracted in a waste-free and chemical-free mechanical process. Hemp can consume CO2 during its growth. In addition, hemp fiber can be disposed of harmlessly by composting or incineration at the end of its life. Hemp fibers are processed and treated only minimally to resist rot and fungal activity. There is little health risk when producing and installing the insulation, thanks to the absence of toxic additive. Its thermal resistance is comparable to mineral wool. But the development and marketing of hemp fibers may be restricted in North America.

  9. Photonic Floquet Topological Insulators

    CERN Document Server

    Rechtsman, Mikael C; Plotnik, Yonatan; Lumer, Yaakov; Nolte, Stefan; Segev, Mordechai; Szameit, Alexander

    2012-01-01

    The topological insulator is a fundamentally new phase of matter, with the striking property that the conduction of electrons occurs only on its surface, not within the bulk, and that conduction is topologically protected. Topological protection, the total lack of scattering of electron waves by disorder, is perhaps the most fascinating and technologically important aspect of this material: it provides robustness that is otherwise known only for superconductors. However, unlike superconductivity and the quantum Hall effect, which necessitate low temperatures or magnetic fields, the immunity to disorder of topological insulators occurs at room temperature and without any external magnetic field. For this reason, topological protection is predicted to have wide-ranging applications in fault-tolerant quantum computing and spintronics. Recently, a large theoretical effort has been directed towards bringing the concept into the domain of photonics: achieving topological protection of light at optical frequencies. ...

  10. Improved DC Gun Insulator

    Energy Technology Data Exchange (ETDEWEB)

    M.L. Neubauer, K.B. Beard, R. Sah, C. Hernandez-Garcia, G. Neil

    2009-05-01

    Many user facilities such as synchrotron light sources and free electron lasers require accelerating structures that support electric fields of 10-100 MV/m, especially at the start of the accelerator chain where ceramic insulators are used for very high gradient DC guns. These insulators are difficult to manufacture, require long commissioning times, and have poor reliability, in part because energetic electrons bury themselves in the ceramic, creating a buildup of charge and causing eventual puncture. A novel ceramic manufacturing process is proposed. It will incorporate bulk resistivity in the region where it is needed to bleed off accumulated charge caused by highly energetic electrons. This process will be optimized to provide an appropriate gradient in bulk resistivity from the vacuum side to the air side of the HV standoff ceramic cylinder. A computer model will be used to determine the optimum cylinder dimensions and required resistivity gradient for an example RF gun application. A ceramic material example with resistivity gradient appropriate for use as a DC gun insulator will be fabricated by glazing using doping compounds and tested.

  11. Hole photoproduction in insulating copper oxide

    NARCIS (Netherlands)

    Sushkov, O.P.; Sawatzky, G.A; Eder, R; Eskes, H.

    1997-01-01

    To explain the experimental spectra for angle-resolved photoemission we consider a modified t-J model. The modified model includes next-nearest(t') and next-next-nearest (t '') hopping as well as corrections due to ''virtual'' charge fluctuations to the spectral weights. A Dyson equation that relate

  12. High Gradient Multilayer Insulator Technology

    Energy Technology Data Exchange (ETDEWEB)

    Sampayan, S E; Caporaso, G J; Nunnally, W C; Sanders, D M; Watson, J A; Krogh, M L; Anderson, H U

    2004-06-03

    We are investigating a novel insulator concept that involves the use of alternating layers of conductors and insulators with periods less than 1 mm. These structures perform 1.5 to 4 times better than conventional insulators in long pulse, short pulse, and alternating polarity applications. We survey our ongoing studies investigating the performance under long pulse electron beam, short pulse, and full reversing conditions.

  13. Transport Experiments on Topological Insulators

    Science.gov (United States)

    2016-08-16

    UU UU UU 16-08-2016 15-Sep-2011 14-Oct-2014 Final Report: Transport Experiments on Topological Insulators The views, opinions and/or findings contained...Triangle Park, NC 27709-2211 Topological Insulators, Dirac Semimetals, Transport in magnetic field, High mobility REPORT DOCUMENTATION PAGE 11. SPONSOR...ABSTRACT Final Report: Transport Experiments on Topological Insulators Report Title The ARO-supported research focused on uncovering novel materials and

  14. Manifold Insulation for Solar Collectors

    Science.gov (United States)

    1982-01-01

    Results of computer analysis of effects of various manifold insulation detailed in 23-page report show that if fluid is distributed to and gathered from array of solar collectors by external rather than internal manifold, effectiveness of manifold insulation has major influence on efficiency. Report describes required input data and presents equations that govern computer model. Provides graphs comparing collector efficiencies for representative manifold sizes and insulations.

  15. Low Permeability Polyimide Insulation Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Resodyn Technologies proposes a new technology that enables the application of polyimide based cryogenic insulation with low hydrogen permeability. This effort...

  16. Super insulating aerogel glazing

    DEFF Research Database (Denmark)

    Schultz, Jørgen Munthe; Jensen, Karsten Ingerslev; Kristiansen, Finn Harken

    2005-01-01

    This paper describes the application results of a previous and current EU-project on super insulating glazing based on monolithic silica aerogel. Prototypes measuring approx. 55´55 cm2 have been made with 15 mm evacuated aerogel between two layers of low-iron glass. Anti-reflective treatment...... of the glass and a heat-treatment of the aerogel increases the visible quality and the solar energy transmittance. A low-conductive rim seal solution with the required vacuum barrier properties has been developed along with a reliable assembly and evacuation process. The prototypes have a centre heat loss...

  17. Hydrogen interactions with silicon-on-insulator materials

    NARCIS (Netherlands)

    Rivera de Mena, A.J.

    2003-01-01

    The booming of microelectronics in recent decades has been made possible by the excellent properties of the Si/SiO2 interface in oxide on silicon systems.. This semiconductor/insulator combination has proven to be of great value for the semiconductor industry. It has made it possible to continuously

  18. Radiation cross-linked polyolefin-insulated wire

    Science.gov (United States)

    Sano, K.; Ishitani, H.

    Because radiation cross-linked polyolefin has excellent mechanical heat resistance, its application limit can be expanded extremely by improving the resistance against heat oxidation and flame. This paper is concerning a halogen free radiation cross-linked polyolefin-insulated wire having excellent heat resistance and flameretardant property, which is used for appliances.

  19. Thermionic Technology Program: A, Insulator test and evaluation: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Dobson, J.C.; Witt, T.

    1987-11-30

    The Thermionic Technology Program (TTP) consisted of two major efforts, evaluation of insulators and evaluation of thermionic converters. This report details the work performed on the insulator phase of the program. Efforts were made to better understand the mechanisms involved in the electrochemistry of insulators at elevated temperatures by modelling the ionic transport through the various layers of the insulator package. Although rigorous analytic solutions could not be obtained owing to a lack of detailed data, a simplified model indicated that alumina should not fail by depletion of aluminum for thousands of years, whereas calculations for yttria revealed a far more rapid depletion of oxygen and consequently earlier failure. Methods for microscopic and electrical testing of cylindrical insulator samples were developed, and an improved test oven design was initiated. Testing of alumina/niobium cermet samples revealed rapid failure contrary to the theoretical predictions for alumina. Large discrepancies in the initial conduction activation energy among the various samples suggested that different mechanisms could have controlled the conduction and hence the failure in different samples, although all had undergone nominally identical processing. The short lifetimes reveal how rapidly ambient conditions in thermionic power conversion can degrade the performance of insulating oxides. It was concluded that minor dopants could have been responsible for the early breakdowns. Thus, high purity materials with precise quality control will be necessary for trilayer package development. 35 refs., 28 figs., 5 tabs.

  20. Process-induced strain in silicon-on-insulator materials

    CERN Document Server

    Tiberj, A; Blanc, C; Contreras, S; Camassel, J

    2002-01-01

    We present a detailed investigation of the influence of oxidation and thinning processes on the in-plane stress in silicon-on-insulator materials. Combining double x-ray diffraction, Fourier transformed infrared and micro-Raman spectroscopy, we show that one can separately evaluate the stress present in the silicon over layer, the buried oxide and the underlying (handle) silicon wafer at any time of a device-forming process.

  1. The influence of insulation materials on corrosion under insulation

    Energy Technology Data Exchange (ETDEWEB)

    Williams, J.; Evans, O. [Aspen Aerogels Inc., Northborough, MA (United States)

    2010-07-01

    This paper discussed the ways in which insulation materials influence corrosion under insulation (CUI) behaviour. Laboratory and field tests of 7 industrial insulation materials and 1 composite system were conducted to identify metrics for improving insulation system designs and determine insulation degradation mechanisms. The tested materials included calcium silicate; expanded perlite; cellular glass; mineral wool; and 2 types of aerogel blanket material. Twelve-week accelerated corrosion tests were conducted to gauge the level of corrosion that occurred beneath the materials on uncoated carbon steel pipe. Drying rate curves for porous materials were also established. A series of aqueous extraction studies was conducted to characterize the durability of various inhibitors on the pipe samples. Results of the study showed that the use of corrosion inhibitors and ensuring the thermal stability of hydrophobing agents will help to prevent CUI. 16 refs., 7 tabs., 17 figs.

  2. A natural topological insulator.

    Science.gov (United States)

    Gehring, P; Benia, H M; Weng, Y; Dinnebier, R; Ast, C R; Burghard, M; Kern, K

    2013-03-13

    The earth's crust and outer space are rich sources of technologically relevant materials which have found application in a wide range of fields. Well-established examples are diamond, one of the hardest known materials, or graphite as a suitable precursor of graphene. The ongoing drive to discover novel materials useful for (opto)electronic applications has recently drawn strong attention to topological insulators. Here, we report that Kawazulite, a mineral with the approximate composition Bi2(Te,Se)2(Se,S), represents a naturally occurring topological insulator whose electronic properties compete well with those of its synthetic counterparts. Kawazulite flakes with a thickness of a few tens of nanometers were prepared by mechanical exfoliation. They exhibit a low intrinsic bulk doping level and correspondingly a sizable mobility of surface state carriers of more than 1000 cm(2)/(V s) at low temperature. Based on these findings, further minerals which due to their minimized defect densities display even better electronic characteristics may be identified in the future.

  3. The birth of topological insulators.

    Science.gov (United States)

    Moore, Joel E

    2010-03-11

    Certain insulators have exotic metallic states on their surfaces. These states are formed by topological effects that also render the electrons travelling on such surfaces insensitive to scattering by impurities. Such topological insulators may provide new routes to generating novel phases and particles, possibly finding uses in technological applications in spintronics and quantum computing.

  4. Electric fields and electrical insulation

    DEFF Research Database (Denmark)

    McAllister, Iain Wilson

    2002-01-01

    The adoption of a field-theoretical approach to problems arising in the framework of electrical insulation is discussed with reference to six main topics, which have been addressed over the last 30 years. These include uniform field electrodes, Green's differential equation, electrode surface......, it is amply demonstrated that such an approach can lead to significant progress in many areas of electrical insulation....

  5. Tailorable Advanced Blanket Insulation (TABI)

    Science.gov (United States)

    Sawko, Paul M.; Goldstein, Howard E.

    1987-01-01

    Single layer and multilayer insulating blankets for high-temperature service fabricated without sewing. TABI woven fabric made of aluminoborosilicate. Triangular-cross-section flutes of core filled with silica batting. Flexible blanket formed into curved shapes, providing high-temperature and high-heat-flux insulation.

  6. Topological Insulators from Electronic Superstructures

    Science.gov (United States)

    Sugita, Yusuke; Motome, Yukitoshi

    2016-07-01

    The possibility of realizing topological insulators by the spontaneous formation of electronic superstructures is theoretically investigated in a minimal two-orbital model including both the spin-orbit coupling and electron correlations on a triangular lattice. Using the mean-field approximation, we show that the model exhibits several different types of charge-ordered insulators, where the charge disproportionation forms a honeycomb or kagome superstructure. We find that the charge-ordered insulators in the presence of strong spin-orbit coupling can be topological insulators showing quantized spin Hall conductivity. Their band gap is dependent on electron correlations as well as the spin-orbit coupling, and even vanishes while showing the massless Dirac dispersion at the transition to a trivial charge-ordered insulator. Our results suggest a new route to realize and control topological states of quantum matter by the interplay between the spin-orbit coupling and electron correlations.

  7. Preparation and performance of thermal insulation energy saving coating materials for exterior wall.

    Science.gov (United States)

    Wang, Fei; Liang, Jinsheng; Tang, Qingguo; Chen, Gong; Chen, Yalei

    2014-05-01

    Nano zinc oxide with a high refractive index has good thermal reflection performance, hollow glass microspheres have good thermal reflection and insulation performance, and sepiolite nanofibers with many nanostructural pores have good thermal insulation performance. The dispensability of nano zinc oxide in coating materials was improved by optimizing surface silane coupling agent modification process, leading to the good thermal reflection performance. The thermal insulation performance was improved by hollow glass microspheres and sepiolite nanofibers. On this basis, the thermal insulation coating materials were prepared by exploring the effect of amount, complex mode, and other factors of the above three kinds of functional fillers on the thermal reflection and insulation performance of coating materials. The results showed that the surface modification effect of nano zinc oxide was the best when the silane coupling agent addition was 6%. The reflection and insulation performance of the coatings were the best when the additions of modified nano zinc oxide, hollow glass microspheres, and sepiolite nanofibers were 3%, 4%, and 4%, respectively. Compared with the control coating materials, the thermal insulation effect was improved obviously, which was evaluated by the -13.5 degrees C increase of maximum temperature difference between the upper and the lower surfaces.

  8. Technology Solutions Case Study: Insulating Concrete Forms

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2012-10-01

    This Pacific Northwest National Laboratory project investigated insulating concrete forms—rigid foam, hollow walls that are filled with concrete for highly insulated, hurricane-resistant construction.

  9. Electric Insulation Detection Method for High-voltage Insulators

    Directory of Open Access Journals (Sweden)

    Wang Jiajun

    2013-07-01

    Full Text Available The principle of partial discharge detection is that through partial bridged discharge under high voltage electric field, it detects the inner air-filled cavity of high-voltage insulators. And it is a nondestructive detection method based on discharge magnitude to judge the insulation quality. The detecting system that adopts the partial discharge detection is more rigorous than testing system for electricity products, which must have small discharge capacity and higher sensitivity. This paper describes the principles of partial discharge detection and analysis insulation detection.

  10. Homeowners' demand for home insulation

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-04-01

    The survey was conducted to provide guidance based on the views and experience of a national sample of homeowners about the insulation of their homes. The telephone survey was conducted with 1,012 homeowners between January 12 and 22, 1978 in the East, Midwest, South, and West regions of the U.S. From the survey data were compiled on plans for installing home insulation with emphasis on attic insulation; how many homes now have various types of insulation; recent experiences in obtaining attic insulation--its cost, material used, when installed, whether installed by the homeowner or a contractor; the kinds of insulation thought to be needed--attic insulation, wall insulation, storm doors and windows; whether homeowners planning attic insulation feel that they have the necessary information to do the work themselves or if they feel they know enough to make the necessary arrangements with a contractor; the effect of higher fuel costs on likelihood of installing attic insulation; shortages of insulating materials; what sources of information are relied on when planning attic insulation; attitudes toward having utility companies install insulation to be paid for by means of utility bills; how much trust homeowners have in the advice of government, utility companies, insulation manufacturers, insulation installers, and retail stores about how much insulation is needed; the likely effect of a tax credit on plans to insulate the attic; and the concern about energy shortages.

  11. Insulation. [In the glass industry

    Energy Technology Data Exchange (ETDEWEB)

    Perkins, J.M.; Horsfield, M.; Jackson, J.D.J.; Woodhead, D.

    1990-12-01

    Furnace insulation in the glass industry is becoming increasingly important as fuel prices rise. Refractory materials with a large number of small pores separated from each other by very thin membranes of refractory produce good insulation. Four main types are used to cope efficiently with the range of temperature involved and the different areas of application. Insulation intended for use at very high temperatures is not as efficient as some of the low temperature materials consequently the insulation is built up in several layers to obtain the optimum efficiency. Insulating bricks are available for various temperatures up to 1850{sup 0}C depending on their chemical composition. Castables, produced by mixing high alumina cements and light-weight refractory aggregates, are quick to install and can be formed into any shape or size. Ceramic fibres felted together to form low density, highly porous, blankets, boards, paper and modules can be used up to 1600{sup 0}C. Microporous insulation based on an ultrafine powder of amorphous silica has a limited temperature range, is subject to chemical attack and abrasion, but has the lowest thermal conductivity of any insulation material available. Criteria for the use of materials in different furnace areas and examples of their application are given. (U.K.).

  12. 16 CFR 460.18 - Insulation ads.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Insulation ads. 460.18 Section 460.18 Commercial Practices FEDERAL TRADE COMMISSION TRADE REGULATION RULES LABELING AND ADVERTISING OF HOME INSULATION § 460.18 Insulation ads. (a) If your ad gives an R-value, you must give the type of insulation...

  13. Mott metal-insulator transition in the doped Hubbard-Holstein model

    Science.gov (United States)

    Kurdestany, Jamshid Moradi; Satpathy, S.

    2017-08-01

    Motivated by the current interest in the understanding of the Mott insulators away from half-filling, observed in many perovskite oxides, we study the Mott metal-insulator transition in the doped Hubbard-Holstein model using the Hartree-Fock mean field theory. The Hubbard-Holstein model is the simplest model containing both the Coulomb and the electron-lattice interactions, which are important ingredients in the physics of the perovskite oxides. In contrast to the half-filled Hubbard model, which always results in a single phase (either metallic or insulating), our results show that away from half-filling, a mixed phase of metallic and insulating regions occurs. As the dopant concentration is increased, the metallic part progressively grows in volume, until it exceeds the percolation threshold, leading to percolative conduction. This happens above a critical dopant concentration δc, which, depending on the strength of the electron-lattice interaction, can be a significant fraction of unity. This means that the material could be insulating even for a substantial amount of doping, in contrast to the expectation that doped holes would destroy the insulating behavior of the half-filled Hubbard model. While effects of fluctuation beyond the mean field remain an open question, our results provide a starting point for the understanding of the density-driven metal-insulator transition observed in many complex oxides.

  14. Metal-Insulator-Semiconductor Photodetectors

    Directory of Open Access Journals (Sweden)

    Chu-Hsuan Lin

    2010-09-01

    Full Text Available The major radiation of the Sun can be roughly divided into three regions: ultraviolet, visible, and infrared light. Detection in these three regions is important to human beings. The metal-insulator-semiconductor photodetector, with a simpler process than the pn-junction photodetector and a lower dark current than the MSM photodetector, has been developed for light detection in these three regions. Ideal UV photodetectors with high UV-to-visible rejection ratio could be demonstrated with III-V metal-insulator-semiconductor UV photodetectors. The visible-light detection and near-infrared optical communications have been implemented with Si and Ge metal-insulator-semiconductor photodetectors. For mid- and long-wavelength infrared detection, metal-insulator-semiconductor SiGe/Si quantum dot infrared photodetectors have been developed, and the detection spectrum covers atmospheric transmission windows.

  15. Measure Guideline: Basement Insulation Basics

    Energy Technology Data Exchange (ETDEWEB)

    Aldrich, R.; Mantha, P.; Puttagunta, S.

    2012-10-01

    This guideline is intended to describe good practices for insulating basements in new and existing homes, and is intended to be a practical resources for building contractors, designers, and also to homeowners.

  16. Metal-insulator-semiconductor photodetectors.

    Science.gov (United States)

    Lin, Chu-Hsuan; Liu, Chee Wee

    2010-01-01

    The major radiation of the sun can be roughly divided into three regions: ultraviolet, visible, and infrared light. Detection in these three regions is important to human beings. The metal-insulator-semiconductor photodetector, with a simpler process than the pn-junction photodetector and a lower dark current than the MSM photodetector, has been developed for light detection in these three regions. Ideal UV photodetectors with high UV-to-visible rejection ratio could be demonstrated with III-V metal-insulator-semiconductor UV photodetectors. The visible-light detection and near-infrared optical communications have been implemented with Si and Ge metal-insulator-semiconductor photodetectors. For mid- and long-wavelength infrared detection, metal-insulator-semiconductor SiGe/Si quantum dot infrared photodetectors have been developed, and the detection spectrum covers atmospheric transmission windows.

  17. On Effective Holographic Mott Insulators

    CERN Document Server

    Baggioli, Matteo

    2016-01-01

    We present a class of holographic models that behave effectively as prototypes of Mott insulators, materials where electron-electron interactions dominate transport phenomena. The main ingredient in the gravity dual is that the gauge-field dynamics contains self-interactions by way of a particular type of non-linear electrodynamics. The electrical response in these models exhibits typical features of Mott-like states: i) the low-temperature DC conductivity is unboundedly low; ii) metal-insulator transitions appear by varying various parameters; iii) for large enough self-interaction strength, the conductivity can even decrease with increasing doping (density of carriers), which appears as a sharp manifestation of `traffic-jam'-like behaviour; iv) the insulating state becomes very unstable towards superconductivity at large enough doping. We exhibit some of the properties of the resulting insulator-superconductor transition, which is sensitive to the amount of disorder in a specific way. These models imply a c...

  18. Magnetically insulated opening switch research

    Science.gov (United States)

    McGeoch, M. W.; Kraft, R.

    1987-01-01

    We examine the feasibility of an opening switch concept based on magnetic insulation in a coaxial thermionic diode. It is found that the impedance ratio between closed and open states of the diode is marginal for efficient energy transfer via this type of switch. The open, or insulated state of the diode is characterized by current leakage across the magnetic field which is associated with the presence of plasma waves.

  19. Advances in Microsphere Insulation Systems

    Science.gov (United States)

    Allen, M. S.; Baumgartner, R. G.; Fesmire, J. E.; Augustynowicz, S. D.

    2004-06-01

    Microsphere insulation, typically consisting of hollow glass bubbles, combines in a single material the desirable properties that other insulations only have individually. The material has high crush strength, low density, is noncombustible, and performs well in soft vacuum. Microspheres provide robust, low-maintenance insulation systems for cryogenic transfer lines and dewars. They also do not suffer from compaction problems typical of perlite that result in the necessity to reinsulate dewars because of degraded thermal performance and potential damage to its support system. Since microspheres are load bearing, autonomous insulation panels enveloped with lightweight vacuum-barrier materials can be created. Comprehensive testing performed at the Cryogenics Test Laboratory located at the NASA Kennedy Space Center demonstrated competitive thermal performance with other bulk materials. Test conditions were representative of actual-use conditions and included cold vacuum pressure ranging from high vacuum to no vacuum and compression loads from 0 to 20 psi. While microspheres have been recognized as a legitimate insulation material for decades, actual implementation has not been pursued. Innovative microsphere insulation system configurations and applications are evaluated.

  20. Passive Collecting of Solar Radiation Energy using Transparent Thermal Insulators, Energetic Efficiency of Transparent Thermal Insulators

    Directory of Open Access Journals (Sweden)

    Smajo Sulejmanovic

    2014-11-01

    Full Text Available This paper explains passive collection of solar radiation energy using transparent thermal insulators. Transparent thermal insulators are transparent for sunlight, at the same time those are very good thermal insulators. Transparent thermal insulators can be placed instead of standard conventional thermal insulators and additionally transparent insulators can capture solar radiation, transform it into heat and save heat just as standard insulators. Using transparent insulators would lead to reduce in usage of fossil fuels and would help protection of an environment and reduce effects of global warming, etc.

  1. Characterizing the structure of topological insulator thin films

    Energy Technology Data Exchange (ETDEWEB)

    Richardella, Anthony; Kandala, Abhinav; Lee, Joon Sue; Samarth, Nitin [Department of Physics, The Pennsylvania State University, University Park, Pennsylvania 16802 (United States)

    2015-08-01

    We describe the characterization of structural defects that occur during molecular beam epitaxy of topological insulator thin films on commonly used substrates. Twinned domains are ubiquitous but can be reduced by growth on smooth InP (111)A substrates, depending on details of the oxide desorption. Even with a low density of twins, the lattice mismatch between (Bi, Sb){sub 2}Te{sub 3} and InP can cause tilts in the film with respect to the substrate. We also briefly discuss transport in simultaneously top and back electrically gated devices using SrTiO{sub 3} and the use of capping layers to protect topological insulator films from oxidation and exposure.

  2. Characterizing the structure of topological insulator thin films

    Directory of Open Access Journals (Sweden)

    Anthony Richardella

    2015-08-01

    Full Text Available We describe the characterization of structural defects that occur during molecular beam epitaxy of topological insulator thin films on commonly used substrates. Twinned domains are ubiquitous but can be reduced by growth on smooth InP (111A substrates, depending on details of the oxide desorption. Even with a low density of twins, the lattice mismatch between (Bi, Sb2Te3 and InP can cause tilts in the film with respect to the substrate. We also briefly discuss transport in simultaneously top and back electrically gated devices using SrTiO3 and the use of capping layers to protect topological insulator films from oxidation and exposure.

  3. Insulating phases of vanadium dioxide are Mott-Hubbard insulators

    Science.gov (United States)

    Huffman, T. J.; Hendriks, C.; Walter, E. J.; Yoon, Joonseok; Ju, Honglyoul; Smith, R.; Carr, G. L.; Krakauer, H.; Qazilbash, M. M.

    2017-02-01

    We present comprehensive broadband optical spectroscopy data on two insulating phases of vanadium dioxide (V O2 ): monoclinic M2 and triclinic. The main result of our work is that the energy gap and the electronic structure are essentially unaltered by the first-order structural phase transition between the M2 and triclinic phases. Moreover, the optical interband features in the M2 and triclinic phases are remarkably similar to those observed in the well-studied monoclinic M1 insulating phase of V O2 . As the energy gap is insensitive to the different lattice structures of the three insulating phases, we rule out vanadium-vanadium pairing (the Peierls component) as the dominant contributor to the opening of the gap. Rather, the energy gap arises primarily from intra-atomic Coulomb correlations.

  4. Correlations in a Band Insulator

    Science.gov (United States)

    Sentef, Michael; Kunes, Jan; Kampf, Arno P.; Werner, Philipp

    2010-03-01

    Using DMFT we find a discontinuous band-to-Mott insulator transition upon an increase in the local Coulomb repulsion in a covalent band insulator [1,2], defined as a band insulator with partially filled local orbitals. The corresponding band gap is a hybridization gap arising from a particular pattern of hopping integrals. Similar characteristics apply to materials such as FeSi, FeSb2 or CoTiSb [3], some of which exhibit temperature dependent magnetic and transport properties reminiscent of Kondo insulators. Both charge and spin gaps in the covalent band insulator shrink with increasing Coulomb repulsion. At moderate interaction strengths the gap renormalization is well described by a renormalization factor analogous to the quasiparticle weight in a Fermi liquid. [4pt] [1] M. Sentef, J. Kunes, P. Werner, and A.P. Kampf, Phys. Rev. B 80, 155116 (2009) [0pt] [2] A.P. Kampf, M. Kollar, J. Kunes, M. Sentef, and D. Vollhardt, arXiv:0910.5126

  5. Thermomagnonic spin transfer and Peltier effects in insulating magnets

    Science.gov (United States)

    Kovalev, Alexey A.; Tserkovnyak, Yaroslav

    2012-03-01

    We study the coupled magnon energy transport and collective magnetization dynamics in ferromagnets with magnetic textures. By constructing a phenomenological theory based on irreversible thermodynamics, we describe the motion of domain walls by thermal gradients and the generation of heat flows by magnetization dynamics. From a microscopic description based on magnon kinetics, we estimate the transport coefficients and analyze the feasibility of energy-related applications in insulating ferromagnets, such as yttrium iron garnet and europium oxide.

  6. Ultra-low-loss inverted taper coupler for silicon-on-insulator ridge waveguide

    DEFF Research Database (Denmark)

    Pu, Minhao; Liu, Liu; Ou, Haiyan;

    2010-01-01

    An ultra-low-loss coupler for interfacing a silicon-on-insulator ridge waveguide and a single-mode fiber in both polarizations is presented. The inverted taper coupler, embedded in a polymer waveguide, is optimized for both the transverse-magnetic and transverse-electric modes through tapering...... the width of the silicon-on-insulator waveguide from 450 nm down to less than 15 nm applying a thermal oxidation process. Two inverted taper couplers are integrated with a 3-mm long silicon-on-insulator ridge waveguide in the fabricated sample. The measured coupling losses of the inverted taper coupler...

  7. Microanalysis of silicon-on-insulator materials

    Energy Technology Data Exchange (ETDEWEB)

    Earwaker, L.G.; Briggs, M.C. (School of Physics and Space Research, Univ. of Birmingham (UK)); Farr, J.P.G. (Dept. of Metallurgy and Materials, Univ. of Birmingham (UK)); Keen, J.M. (Royal Signals and Radar Establishment, Great Malvern (UK))

    1991-03-01

    Silicon-on-insulator (SOI) material produced by the porous silicon route has been analysed using nuclear techniques in the ion microprobe at the University of Birmingham, School of Physics and Space Research. The analysis system, based on CAMAC and a 1050 Falcon LSI 11/12 microprocessor, is described and measurements are reported of early attempts to metallise masked porous silicon structures. It is found that the porous silicon has been converted to tungsten between islands and a thin skin of tungsten has been produced on the surface of the islands. Oxidation of the tungsten surface has also been observed and evidence found for some penetration of tungsten through pinholes in the protective nitride layer over the islands. (orig.).

  8. Electro-optic metal-insulator-semiconductor-insulator-metal Mach-Zehnder plasmonic modulator

    Science.gov (United States)

    Thomas, Roney; Ikonic, Zoran; Kelsall, Robert W.

    2012-01-01

    The performance of a CMOS-compatible electro-optic Mach-Zehnder plasmonic modulator is investigated using electromagnetic and carrier transport simulations. Each arm of the Mach-Zehnder device comprises a metal-insulator-semiconductor-insulator-metal (MISIM) structure on a buried oxide substrate. Quantum mechanical effects at the oxide/semiconductor interfaces were considered in the calculation of electron density profiles across the structure, in order to determine the refractive index distribution and its dependence on applied bias. This information was used in finite element simulations of the electromagnetic modes within the MISIM structure in order to determine the Mach-Zehnder arm lengths required to achieve destructive interference and the corresponding propagation loss incurred by the device. Both inversion and accumulation mode devices were investigated, and the layer thicknesses and height were adjusted to optimise the device performance. A device loss of <8 dB is predicted for a MISIM structure with a 25 nm thick silicon layer, for which the device length is <3 μm, and <5 dB loss is predicted for the limiting case of a 5 nm thick silicon layer in a 1.2 μm long device: in both cases, the maximum operating voltage is 7.5 V.

  9. Emergence of superconductivity from the dynamically heterogeneous insulating state in La(2-x)Sr(x)CuO4.

    Science.gov (United States)

    Shi, Xiaoyan; Logvenov, G; Bollinger, A T; Božović, I; Panagopoulos, C; Popović, Dragana

    2013-01-01

    A central issue for copper oxides is the nature of the insulating ground state at low carrier densities and the emergence of high-temperature superconductivity from that state with doping. Even though this superconductor-insulator transition (SIT) is a zero-temperature transition, measurements are not usually carried out at low temperatures. Here we use magnetoresistance to probe both the insulating state at very low temperatures and the presence of superconducting fluctuations in La(2-x)Sr(x)CuO(4) films, for doping levels that range from the insulator to the superconductor (x  =  0.03-0.08). We observe that the charge glass behaviour, characteristic of the insulating state, is suppressed with doping, but it coexists with superconducting fluctuations that emerge already on the insulating side of the SIT. The unexpected quenching of the superconducting fluctuations by the competing charge order at low temperatures provides a new perspective on the mechanism for the SIT.

  10. Holographic Mott-like insulator

    CERN Document Server

    Ling, Yi; Wu, Jian-Pin

    2015-01-01

    In this paper we show that a gravity dual model with Q-lattice structure can provide a holographic description of a Mott-like insulator, which is an extension of our previous work in arXiv:1507.02514. We construct the bulk geometry with two gauge fields and introduce a coupling between the lattice and the Maxwell field. It turns out that an insulating ground state with hard gap as well as vanishing DC conductivity can be achieved in the zero temperature limit, which can be viewed as a substantial progress towards the holographic construction of Mott-like insulator. The non-Drude behavior in optical conductivity is also discussed.

  11. Topological insulators and topological superconductors

    CERN Document Server

    Bernevig, Andrei B

    2013-01-01

    This graduate-level textbook is the first pedagogical synthesis of the field of topological insulators and superconductors, one of the most exciting areas of research in condensed matter physics. Presenting the latest developments, while providing all the calculations necessary for a self-contained and complete description of the discipline, it is ideal for graduate students and researchers preparing to work in this area, and it will be an essential reference both within and outside the classroom. The book begins with simple concepts such as Berry phases, Dirac fermions, Hall conductance and its link to topology, and the Hofstadter problem of lattice electrons in a magnetic field. It moves on to explain topological phases of matter such as Chern insulators, two- and three-dimensional topological insulators, and Majorana p-wave wires. Additionally, the book covers zero modes on vortices in topological superconductors, time-reversal topological superconductors, and topological responses/field theory and topolo...

  12. Demonstration of Microsphere Insulation in Cryogenic Vessels

    Science.gov (United States)

    Baumgartner, R. G.; Myers, E. A.; Fesmire, J. E.; Morris, D. L.; Sokalski, E. R.

    2006-04-01

    While microspheres have been recognized as a legitimate insulation material for decades, actual use in full-scale cryogenic storage tanks has not been demonstrated until now. The performance and life-cycle-cost advantages previously predicted have now been proven. Most bulk cryogenic storage tanks are insulated with either multilayer insulation (MLI) or perlite. Microsphere insulation, consisting of hollow glass bubbles, combines in a single material the desirable properties that other insulations only have individually. The material has high crush strength, low density, is noncombustible, and performs well in soft vacuum. These properties were proven during recent field testing of two 22,700-L (6,000-gallon) liquid nitrogen tanks, one insulated with microsphere insulation and the other with perlite. Normal evaporation rates (NER) for both tanks were monitored with precision test equipment and insulation levels within the tanks were observed through view ports as an indication of insulation compaction. Specific industrial applications were evaluated based on the test results and beneficial properties of microsphere insulation. Over-the-road trailers previously insulated with perlite will benefit not only from the reduced heat leak, but also the reduced mass of microsphere insulation. Economic assessments for microsphere-insulated cryogenic vessels including life-cycle cost are also presented.

  13. Better and cheaper extra insulation

    DEFF Research Database (Denmark)

    Rudbeck, Claus Christian

    1998-01-01

    of buildings. The thermal performance of the systems is compared to an ideal situation, showing that there is still a potential of further savings by improving the design of the insulation systems.To improve the thermal performance of the systems a number of product developments are proposed.......In the current energy plan, focus in placed on further savings of heat in buildings. If the target of the energy plan should be achieved, there is a need for saving heat both in new and existing buildings.The article investigate and compare the properties of several systems for external insulation...

  14. Better and cheaper extra insulation

    DEFF Research Database (Denmark)

    Rudbeck, Claus Christian

    1998-01-01

    In the current energy plan, focus in placed on further savings of heat in buildings. If the target of the energy plan should be achieved, there is a need for saving heat both in new and existing buildings.The article investigate and compare the properties of several systems for external insulation...... of buildings. The thermal performance of the systems is compared to an ideal situation, showing that there is still a potential of further savings by improving the design of the insulation systems.To improve the thermal performance of the systems a number of product developments are proposed....

  15. Topological insulators fundamentals and perspectives

    CERN Document Server

    Ortmann, Frank; Valenzuela, Sergio O

    2015-01-01

    There are only few discoveries and new technologies in physical sciences that have the potential to dramatically alter and revolutionize our electronic world. Topological insulators are one of them. The present book for the first time provides a full overview and in-depth knowledge about this hot topic in materials science and condensed matter physics. Techniques such as angle-resolved photoemission spectrometry (ARPES), advanced solid-state Nuclear Magnetic Resonance (NMR) or scanning-tunnel microscopy (STM) together with key principles of topological insulators such as spin-locked electronic

  16. Inversion-symmetric topological insulators

    Science.gov (United States)

    Hughes, Taylor L.; Prodan, Emil; Bernevig, B. Andrei

    2011-06-01

    We analyze translationally invariant insulators with inversion symmetry that fall outside the current established classification of topological insulators. These insulators exhibit no edge or surface modes in the energy spectrum and hence they are not edge metals when the Fermi level is in the bulk gap. However, they do exhibit protected modes in the entanglement spectrum localized on the cut between two entangled regions. Their entanglement entropy cannot be made to vanish adiabatically, and hence the insulators can be called topological. There is a direct connection between the inversion eigenvalues of the Hamiltonian band structure and the midgap states in the entanglement spectrum. The classification of protected entanglement levels is given by an integer N, which is the difference between the negative inversion eigenvalues at inversion symmetric points in the Brillouin zone, taken in sets of 2. When the Hamiltonian describes a Chern insulator or a nontrivial time-reversal invariant topological insulator, the entirety of the entanglement spectrum exhibits spectral flow. If the Chern number is zero for the former, or time reversal is broken in the latter, the entanglement spectrum does not have spectral flow, but, depending on the inversion eigenvalues, can still exhibit protected midgap bands similar to impurity bands in normal semiconductors. Although spectral flow is broken (implying the absence of real edge or surface modes in the original Hamiltonian), the midgap entanglement bands cannot be adiabatically removed, and the insulator is “topological.” We analyze the linear response of these insulators and provide proofs and examples of when the inversion eigenvalues determine a nontrivial charge polarization, a quantum Hall effect, an anisotropic three-dimensional (3D) quantum Hall effect, or a magnetoelectric polarization. In one dimension, we establish a link between the product of the inversion eigenvalues of all occupied bands at all inversion

  17. Thermoelectric power of Kondo insulators

    OpenAIRE

    佐宗, 哲郎

    2002-01-01

    Thermoelectric power (TEP) of the Kondo insulators is investigated theoretically within the framework of the dynamical mean field theory. It is found that the temperature dependence of the Seebeck coefficient changes from the ordinary behavior S(T) ∝ T−1 in semiconductors to S ∝ T at low temperatures due to the finite imaginary part of the electron self-energy in the Kondo insulators with strong correlation. Realistic models for YbB12 and FeSi based on the band calculations are also studied....

  18. Partial Model of Insulator/Insulator Contact Charging

    Science.gov (United States)

    Hogue, Michael; Calle, C. I.; Buhler, C. R.; Mucciolo, E. R.

    2005-01-01

    Two papers present a two-phase equilibrium model that partly explains insulator/ insulator contact charging. In this model, a vapor of ions within a gas is in equilibrium with a submonolayer of ions of the same species that have been adsorbed on the surface of an insulator. The surface is modeled as having localized states, each with a certain energy of adsorption for an ion. In an earlier version of the model described in the first paper, the ions do not interact with each other. Using the grand canonical ensemble, the chemical potentials of both vapor and absorbed phases are derived and equated to determine the vapor pressure. If a charge is assigned to the vapor particles (in particular, if single ionization is assumed), then the surface charge density associated with adsorbed ions can be calculated as a function of pressure. In a later version of the model presented in the second paper, the submodel of the vapor phase is extended to include electrostatic interactions between vapor ions and adsorbed ones as well as the screening effect, at a given distance from the surface, of ions closer to the surface. Theoretical values of this model closely match preliminary experimental data on the discharge of insulators as a function of pressure.

  19. Experimental Realizations of Magnetic Topological Insulator and Topological Crystalline Insulator

    Science.gov (United States)

    Xu, Suyang

    2013-03-01

    Over the past few years the experimental research on three-dimensional topological insulators have emerged as one of the most rapidly developing fields in condensed matter physics. In this talk, we report on two new developments in the field: The first part is on the dynamic interplay between ferromagnetism and the Z2 topological insulator state (leading to a magnetic topological insulator). We present our spin-resolved photoemission and magnetic dichroic experiments on MBE grown films where a hedgehog-like spin texture is revealed on the magnetically ordered surface of Mn-Bi2Se3 revealing a Berry's phase gradient in energy-momentum space of the crystal. A chemically/electrically tunable Berry's phase switch is further demonstrated via the tuning of the spin groundstate in Mn-Bi2Se3 revealed in our data (Nature Physics 8, 616 (2012)). The second part of this talk describes our experimental observation of a new topological phase of matter, namely a topological crystalline insulator where space group symmetries replace the role of time-reversal symmetry in an otherwise Z2 topological insulator predicted in theory. We experimentally investigate the possibility of a mirror symmetry protected topological phase transition in the Pb1-xSnxTe alloy system, which has long been known to contain an even number of band inversions based on band theory. Our experimental results show that at a composition below the theoretically predicted band inversion, the system is fully gapped, whereas in the band-inverted regime, the surface exhibits even number of spin-polarized Dirac cone states revealing mirror-protected topological order (Nature Communications 3, 1192 (2012)) distinct from that observed in Z2 topological insulators. We discuss future experimental possibilities opened up by these new developments in topological insulators research. This work is in collaboration with M. Neupane, C. Liu, N. Alidoust, I. Belopolski, D. Qian, D.M. Zhang, A. Richardella, A. Marcinkova, Q

  20. Team for Research on Topological Insulators

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    The team led by Prof. FANG Zhong at the CAS Institute of Physics (lOP) was awarded for their breakthrough researches in the field of topological insulators. Topological insulator is a new state of quantum matter different from conventional insulators or metals, of which human beings know very little. The team, consisting of theoretical, computational and experimental experts,

  1. Technology sandwich panels with mineral wool insulation

    OpenAIRE

    Tyulenev M.; Burtzeva M.; Mednikova E.

    2016-01-01

    Sandwich panel — self–supporting structure consisting of metal cladding and thermal insulation core. As a heat–insulating core used mineral wool, foamed plastics. Production of sandwich panels with insulation mineral wool performed on modular lines for the production of aggregate or conveyer scheme. Sandwich panels are used as load–bearing elements of the facades, as well as a roof covering.

  2. Magnetically Insulated Opening Switch Research.

    Science.gov (United States)

    1987-01-01

    this research is to investigate the validity of the magneti- cally insulated opening switch concept proposed by Eninger (Ref. 5, Appendix 1). The...1973). 3. Y. Carmel, and J. Nation, Phys, Rev. Lett. 31, 286 (1973). 4. T.J. Orzechowski, and G. Bekefi, Phys. Fluids 19, 43 (1976). U 5. 3. Eninger

  3. Topological Insulators from Group Cohomology

    Science.gov (United States)

    Alexandradinata, A.; Wang, Zhijun; Bernevig, B. Andrei

    2016-04-01

    We classify insulators by generalized symmetries that combine space-time transformations with quasimomentum translations. Our group-cohomological classification generalizes the nonsymmorphic space groups, which extend point groups by real-space translations; i.e., nonsymmorphic symmetries unavoidably translate the spatial origin by a fraction of the lattice period. Here, we further extend nonsymmorphic groups by reciprocal translations, thus placing real and quasimomentum space on equal footing. We propose that group cohomology provides a symmetry-based classification of quasimomentum manifolds, which in turn determines the band topology. In this sense, cohomology underlies band topology. Our claim is exemplified by the first theory of time-reversal-invariant insulators with nonsymmorphic spatial symmetries. These insulators may be described as "piecewise topological," in the sense that subtopologies describe the different high-symmetry submanifolds of the Brillouin zone, and the various subtopologies must be pieced together to form a globally consistent topology. The subtopologies that we discover include a glide-symmetric analog of the quantum spin Hall effect, an hourglass-flow topology (exemplified by our recently proposed KHgSb material class), and quantized non-Abelian polarizations. Our cohomological classification results in an atypical bulk-boundary correspondence for our topological insulators.

  4. On effective holographic Mott insulators

    Science.gov (United States)

    Baggioli, Matteo; Pujolàs, Oriol

    2016-12-01

    We present a class of holographic models that behave effectively as prototypes of Mott insulators — materials where electron-electron interactions dominate transport phenomena. The main ingredient in the gravity dual is that the gauge-field dynamics contains self-interactions by way of a particular type of non-linear electrodynamics. The electrical response in these models exhibits typical features of Mott-like states: i) the low-temperature DC conductivity is unboundedly low; ii) metal-insulator transitions appear by varying various parameters; iii) for large enough self-interaction strength, the conductivity can even decrease with increasing doping (density of carriers) — which appears as a sharp manifestation of `traffic-jam'-like behaviour; iv) the insulating state becomes very unstable towards superconductivity at large enough doping. We exhibit some of the properties of the resulting insulator-superconductor transition, which is sensitive to the momentum dissipation rate in a specific way. These models imply a clear and generic correlation between Mott behaviour and significant effects in the nonlinear electrical response. We compute the nonlinear current-voltage curve in our model and find that indeed at large voltage the conductivity is largely reduced.

  5. Topological Insulators from Group Cohomology

    Directory of Open Access Journals (Sweden)

    A. Alexandradinata

    2016-04-01

    Full Text Available We classify insulators by generalized symmetries that combine space-time transformations with quasimomentum translations. Our group-cohomological classification generalizes the nonsymmorphic space groups, which extend point groups by real-space translations; i.e., nonsymmorphic symmetries unavoidably translate the spatial origin by a fraction of the lattice period. Here, we further extend nonsymmorphic groups by reciprocal translations, thus placing real and quasimomentum space on equal footing. We propose that group cohomology provides a symmetry-based classification of quasimomentum manifolds, which in turn determines the band topology. In this sense, cohomology underlies band topology. Our claim is exemplified by the first theory of time-reversal-invariant insulators with nonsymmorphic spatial symmetries. These insulators may be described as “piecewise topological,” in the sense that subtopologies describe the different high-symmetry submanifolds of the Brillouin zone, and the various subtopologies must be pieced together to form a globally consistent topology. The subtopologies that we discover include a glide-symmetric analog of the quantum spin Hall effect, an hourglass-flow topology (exemplified by our recently proposed KHgSb material class, and quantized non-Abelian polarizations. Our cohomological classification results in an atypical bulk-boundary correspondence for our topological insulators.

  6. Thermal Insulation from Hardwood Residues

    Science.gov (United States)

    Sable, I.; Grinfelds, U.; Vikele, L.; Rozenberga, L.; Zeps, M.; Luguza, S.

    2015-11-01

    Adequate heat is one of the prerequisites for human wellbeing; therefore, building insulation is required in places where the outside temperature is not suitable for living. The climate change, with its rising temperatures and longer dry periods, promotes enlargement of the regions with conditions more convenient for hardwood species than for softwood species. Birch (Betula pendula) is the most common hardwood species in Latvia. The aim of this work was to obtain birch fibres from wood residues of plywood production and to form low-density thermal insulation boards. Board formation and production was done in the presence of water; natural binder, fire retardant and fungicide were added in different concentrations. Board properties such as density, transportability or resistance to particulate loss, thermal conductivity and reaction to fire were investigated. This study included thermal insulation boards with the density of 102-120 kg/m3; a strong correlation between density and the binder amount was found. Transportability also improved with the addition of a binder, and 0.1-0.5% of the binder was the most appropriate amount for this purpose. The measured thermal conductivity was in the range of 0.040-0.043 W/(m·K). Fire resistance increased with adding the fire retardant. We concluded that birch fibres are applicable for thermal insulation board production, and it is possible to diversify board properties, changing the amount of different additives.

  7. Insulation materials for advanced water storages

    DEFF Research Database (Denmark)

    Schultz, Jørgen Munthe

    2005-01-01

    This chapter gives an overview of different insulation materials that may be of interest for insulation of solar storage tanks. In order to understand the special characteristics of the different insulation materials the heat transfer mechanisms involved are shortly described. In the following...... sections different insulation materials are described with respect to material characteristics and some comments on the easiness of application for tank insulation. The material properties listed in this paper are typical values, which gives an idea of the possibilities but in case of a specific design...

  8. Insulation materials for advanced water storages

    DEFF Research Database (Denmark)

    Schultz, Jørgen Munthe

    2005-01-01

    This chapter gives an overview of different insulation materials that may be of interest for insulation of solar storage tanks. In order to understand the special characteristics of the different insulation materials the heat transfer mechanisms involved are shortly described. In the following...... sections different insulation materials are described with respect to material characteristics and some comments on the easiness of application for tank insulation. The material properties listed in this paper are typical values, which gives an idea of the possibilities but in case of a specific design...

  9. Analytical chemistry methods for mixed oxide fuel, March 1985

    Energy Technology Data Exchange (ETDEWEB)

    1985-03-01

    This standard provides analytical chemistry methods for the analysis of materials used to produce mixed oxide fuel. These materials are ceramic fuel and insulator pellets and the plutonium and uranium oxides and nitrates used to fabricate these pellets.

  10. Treating Fibrous Insulation to Reduce Thermal Conductivity

    Science.gov (United States)

    Zinn, Alfred; Tarkanian, Ryan

    2009-01-01

    A chemical treatment reduces the convective and radiative contributions to the effective thermal conductivity of porous fibrous thermal-insulation tile. The net effect of the treatment is to coat the surfaces of fibers with a mixture of transition-metal oxides (TMOs) without filling the pores. The TMO coats reduce the cross-sectional areas available for convection while absorbing and scattering thermal radiation in the pores, thereby rendering the tile largely opaque to thermal radiation. The treatment involves a sol-gel process: A solution containing a mixture of transition-metal-oxide-precursor salts plus a gelling agent (e.g., tetraethylorthosilicate) is partially cured, then, before it visibly gels, is used to impregnate the tile. The solution in the tile is gelled, then dried, and then the tile is fired to convert the precursor salts to the desired mixed TMO phases. The amounts of the various TMOs ultimately incorporated into the tile can be tailored via the concentrations of salts in the solution, and the impregnation depth can be tailored via the viscosity of the solution and/or the volume of the solution relative to that of the tile. The amounts of the TMOs determine the absorption and scattering spectra.

  11. On beer, brewing and better thermal insulation

    Energy Technology Data Exchange (ETDEWEB)

    Den Herder, P.W.

    1989-01-01

    The art of brewing goes back to very ancient times. Though little has changed in the actual brewing process, the technical equipment has been improved considerably. Cooling the brew, gives also a need for thermal insulation. In the beginning cork has been used as an thermal insulation material, followed by cellular plastic foam and fibrous insulants in the past 30 years. All these materials gradually absorb water, caused by the phenomena that water vapour in the air tends to go into the direction of the cold pipe surface. In practice it appeared to be impossible to make the above insulation materials vapourtight. Water vapour will condensate in the insulation material into water. Water being the greatest enemy of insulation material. Cellular glass insulation, well-known in the petro-chemical industry, has proven to be 100% vapourtight, so an excellent choice for cold piping and equipment. 5 figs.

  12. Properties of two-dimensional insulators: A DFT study of bimetallic oxide CrW{sub 2}O{sub 9} clusters adsorption on MgO ultrathin films

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Jia, E-mail: jia_zhu@jxnu.edu.cn [College of Chemistry and Chemical Engineering, Jiangxi Normal University, Nanchang, Jiangxi 330022 (China); Zhang, Hui; Zhao, Ling; Xiong, Wei [College of Chemistry and Chemical Engineering, Jiangxi Normal University, Nanchang, Jiangxi 330022 (China); Huang, Xin; Wang, Bin [Department of Chemistry, Fuzhou University, Fuzhou, Fujian, 350108 (China); Zhang, Yongfan, E-mail: zhangyf@fzu.edu.cn [Department of Chemistry, Fuzhou University, Fuzhou, Fujian, 350108 (China); State Key Laboratory of Photocatalysis on Energy and Environment, Fuzhou, Fujian, 350002 (China)

    2016-08-30

    Highlights: • Completely different properties of CrW{sub 2}O{sub 9} on films compared with that on surface. • The first example of CT by electron tunneling from film to bimetallic oxide cluster. • A progressive Lewis acid site, better catalytic activities for adsorbed CrW{sub 2}O{sub 9}. - Abstract: Periodic density functional theory calculations have been performed to study the electronic properties of bimetallic oxide CrW{sub 2}O{sub 9} clusters adsorbed on MgO/Ag(001) ultrathin films (<1 nm). Our results show that after deposition completely different structures, electronic properties and chemical reactivity of dispersed CrW{sub 2}O{sub 9} clusters on ultrathin films are observed compared with that on the thick MgO surface. On the thick MgO(001) surface, adsorbed CrW{sub 2}O{sub 9} clusters are distorted significantly and just a little electron transfer occurs from oxide surface to clusters, which originates from the formation of adsorption dative bonds at interface. Whereas on the MgO/Ag(001) ultrathin films, the resulting CrW{sub 2}O{sub 9} clusters keep the cyclic structures and the geometries are similar to that of gas-phase [CrW{sub 2}O{sub 9}]{sup −}. Interestingly, we predicted the occurrence of a net transfer of one electron by direct electron tunneling from the MgO/Ag(001) films to CrW{sub 2}O{sub 9} clusters through the thin MgO dielectric barrier. Furthermore, our work reveals a progressive Lewis acid site where spin density preferentially localizes around the Cr atom not the W atoms for CrW{sub 2}O{sub 9}/MgO/Ag(001) system, indicating a potentially good bimetallic oxide for better catalytic activities with respect to that of pure W{sub 3}O{sub 9} clusters. As a consequence, present results reveal that the adsorption of bimetallic oxide CrW{sub 2}O{sub 9} clusters on the MgO/Ag(001) ultrathin films provide a new perspective to tune and modify the properties and chemical reactivity of bimetallic oxide adsorbates as a function of the thickness

  13. A Solution-Doped Polymer Semiconductor:Insulator Blend for Thermoelectrics

    KAUST Repository

    Kiefer, David

    2016-09-01

    Poly(ethylene oxide) is demonstrated to be a suitable matrix polymer for the solution-doped conjugated polymer poly(3-hexylthiophene). The polarity of the insulator combined with carefully chosen processing conditions permits the fabrication of tens of micrometer-thick films that feature a fine distribution of the F4TCNQ dopant:semiconductor complex. Changes in electrical conductivity from 0.1 to 0.3 S cm−1 and Seebeck coefficient from 100 to 60 μV K−1 upon addition of the insulator correlate with an increase in doping efficiency from 20% to 40% for heavily doped ternary blends. An invariant bulk thermal conductivity of about 0.3 W m−1 K−1 gives rise to a thermoelectric Figure of merit ZT ∼ 10−4 that remains unaltered for an insulator content of more than 60 wt%. Free-standing, mechanically robust tapes illustrate the versatility of the developed dopant:semiconductor:insulator ternary blends.

  14. Silicon on insulator (SOI) technology; Technologie silicium sur isolant (SOI)

    Energy Technology Data Exchange (ETDEWEB)

    Cristoloveanu, S.; Balestra, F. [Centre National de la Recherche Scientifique (CNRS), Institut de Microelectronique, Electromagnetisme et Photonique, IMEP, Ecole Nationale Superieure d' Electronique et de Radioelectricite de Grenoble, ENSERG, 38 - Grenoble (France)

    2002-05-01

    The silicon on insulator (SOI) technology was invented in the 1960's and 1970's in order to satisfy the demand of hardened integrated circuits with respect to ionizing radiations. This technology uses an embedded oxide for a perfect dielectric insulation between the active circuit (superficial) layer and the massive silicon substrate (responsible of undesirable parasite effects). The SOI technology is a first-class technology for the fabrication of low consumption and high frequency components. This article describes the state-of-the-art of the SOI technology, starting with the methods of synthesis of the main materials. The essential advantages of SOI circuits with respect to conventional massive silicon devices are presented with some typical examples of components (totally or partially depleted MOS transistors, miniaturization of conventional MOS transistors, innovative architectures). Finally the challenges to be taken up by the SOI technology to spread over the market of microelectronics are discussed. (J.S.)

  15. Electronic reconstruction at the interface between the Mott insulator LaVO{sub 3} and the band insulator SrTiO{sub 3}

    Energy Technology Data Exchange (ETDEWEB)

    Stuebinger, Martin; Gabel, Judith; Gagel, Philipp; Sing, Michael; Claessen, Ralph [Universitaet Wuerzburg, Physikalisches Institut and Roentgen Center for Complex Material Systems (RCCM), 97074 Wuerzburg (Germany)

    2016-07-01

    Akin to the well known oxide heterostructure LaAlO{sub 3}/SrTiO{sub 3} (LAO/STO) the formation of a conducting interface is found between the strongly correlated, polar Mott insulator LaV{sup 3+}O{sub 3} (LVO) and the non-polar band insulator STO. Since LaV{sup 3+}O{sub 3} tends to overoxidize to the thermodynamically more favourable LaV{sup 5+}O{sub 4} phase when exposed to air, a suitable passivation is required. Therefore, we have employed pulsed laser deposition thin film growth of LVO films with a crystalline LAO capping layer. In situ photoemission measurements of samples before and after being exposed to air show that the V oxidation state can indeed be stabilized by the LAO capping layer. By transport measurements, we identify an insulator-to-metal transition at a combined LAO/LVO overlayer thickness of 4 to 5 unit cells. With LVO being a Mott insulator, passivation by the LAO capping opens the opportunity to study a band-filling controlled Mott insulator to metal transition induced by a purely electrostatic mechanism without interfering overoxidation of the LVO film.

  16. A review of magnetic insulation

    Directory of Open Access Journals (Sweden)

    Zósimo Arévalo Velosa

    2010-04-01

    Full Text Available High energy devices are designed to work with extremely high electric and magnetic fields. As a consequence, these devices show non-linear phenomena and behaviour, such as magnetic insulation which alters electron trajectory. A mathematical analysis and review of magnetic insulation were carried out as a consequence of non-linearity to find frontier conditions and solutions to the problem. This paper was aimed at presenting the topic in a way which is easier for that part of the academic community which is unfamiliar with it to understand it. The paper gives a description of the phenomena developed by high electric and magnetic fields in a vacuum plane diode, some equations modelling the phenomenon, proves its existence and finds positive solutions based on upper and lower solutions for boundary limit problems and gives some practical applications.

  17. Magnetically insulated transmission line oscillator

    Energy Technology Data Exchange (ETDEWEB)

    Bacon, Larry D. (Albuquerque, NM); Ballard, William P. (Albuquerque, NM); Clark, M. Collins (Albuquerque, NM); Marder, Barry M. (Albuquerque, NM)

    1988-01-01

    A magnetically insulated transmission line oscillator employs self-generated magnetic fields to generate microwave energy. An anode of the oscillator includes slow-wave structures which are formed of a plurality of thin conductive vanes defining cavities therebetween, and a gap is formed between the anode and a cathode of the oscillator. In response to a pulsed voltage applied to the anode and cathode, self-generated magnetic fields arfe produced in a cross-field orientation with respect to the orientation of the electric field between the anode and the cathode. The cross-field magnetic fields insulate the flow of electrons in the gap and confine the flow of electrons within the gap.

  18. Flexible pile thermal barrier insulator

    Science.gov (United States)

    Anderson, G. E.; Fell, D. M.; Tesinsky, J. S. (Inventor)

    1978-01-01

    A flexible pile thermal barrier insulator included a plurality of upstanding pile yarns. A generally planar backing section supported the upstanding pile yarns. The backing section included a plurality of filler yarns forming a mesh in a first direction. A plurality of warp yarns were looped around said filler yarns and pile yarns in the backing section and formed a mesh in a second direction. A binder prevented separation of the yarns in the backing section.

  19. Topological Insulators at Room Temperature

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Haijun; /Beijing, Inst. Phys.; Liu, Chao-Xing; /Tsinghua U., Beijing; Qi, Xiao-Liang; /Stanford U., Phys. Dept.; Dai, Xi; Fang, Zhong; /Beijing, Inst. Phys.; Zhang, Shou-Cheng; /Stanford U., Phys. Dept.

    2010-03-25

    Topological insulators are new states of quantum matter with surface states protected by the time-reversal symmetry. In this work, we perform first-principle electronic structure calculations for Sb{sub 2}Te{sub 3}, Sb{sub 2}Se{sub 3}, Bi{sub 2}Te{sub 3} and Bi{sub 2}Se{sub 3} crystals. Our calculations predict that Sb{sub 2}Te{sub 3}, Bi{sub 2}T e{sub 3} and Bi{sub 2}Se{sub 3} are topological insulators, while Sb{sub 2}Se{sub 3} is not. In particular, Bi{sub 2}Se{sub 3} has a topologically non-trivial energy gap of 0.3eV , suitable for room temperature applications. We present a simple and unified continuum model which captures the salient topological features of this class of materials. These topological insulators have robust surface states consisting of a single Dirac cone at the {Lambda} point.

  20. Novel magnetic half-metallic materials based on ionic insulators doped with nonmagnetic impurities: MgO + B, C, N Systems

    Science.gov (United States)

    Bannikov, V. V.; Shein, I. R.; Ivanovskii, A. L.

    2007-07-01

    It is established that magnesium oxide (a nonmagnetic ionic insulator) exhibits a transition to the state of a magnetic half-metal upon the introduction of nonmagnetic impurities (boron, carbon, or nitrogen) into the crystal lattice. The possibility of obtaining novel magnetic materials for spintronics by doping ionic insulators with nonmagnetic impurities is discussed.

  1. Phase coexistence and Mott metal-insulator transition in the doped Hubbard-Holstein model

    Science.gov (United States)

    Moradi Kurdestany, Jamshid; Satpathy, Sashi

    2015-03-01

    Motivated by recent progress in the understanding of the Mott insulators away from half filling [?], often observed in the oxide materials, we study the role of the electron-lattice interaction vis-à-vis the electron correlations by studying the one-band Hubbard-Holstein model using the Gutzwiller variational method. Our theory predicts phase separation for sufficiently strong electron-lattice interaction, which however is frustrated in the solid due to the long-range Coulomb interaction of the dopant atoms, resulting in puddles of metallic phases embedded in the insulating matrix. Metallic state occurs when the volume fraction of the metallic phase exceeds the percolation threshold, as the dopant concentration is increased. Connection is made with the experimentally observed metal-insulator transition in the complex oxides.

  2. Superconductivity from insulating elements under high pressure

    Energy Technology Data Exchange (ETDEWEB)

    Shimizu, Katsuya

    2015-07-15

    Highlights: • Even insulating molecule can become metal and superconductor by pressure with relatively high T{sub c}. • The highest T{sub c} is observed in sulfur with 17 K at 160 GPa. • Hydrogen is the best candidate of the highest T{sub c} element. - Abstract: The insulating and superconducting states would seem to have very different characteristics. Can any insulator become a superconductor? One proven method, doping an insulating material with carriers, can create itinerant states inside the gap between the conduction and valence bands. Another method is to squeeze the structure by applying pressure. Pressure can expand the bandwidth and also narrow the energy band gap. So the first step to turn an insulator into a superconductor is to make it metallic. Here we review our experimental research and results on superconductivity induced by applying pressure to insulating molecular systems such as elemental molecules.

  3. Hydrogen storage in insulated pressure vessels

    Energy Technology Data Exchange (ETDEWEB)

    Aceves, S.M.; Garcia-Villazana, O. [Lawrence Livermore National Lab., CA (United States)

    1998-08-01

    Insulated pressure vessels are cryogenic-capable pressure vessels that can be fueled with liquid hydrogen (LH{sub 2}) or ambient-temperature compressed hydrogen (CH{sub 2}). Insulated pressure vessels offer the advantages of liquid hydrogen tanks (low weight and volume), with reduced disadvantages (lower energy requirement for hydrogen liquefaction and reduced evaporative losses). This paper shows an evaluation of the applicability of the insulated pressure vessels for light-duty vehicles. The paper shows an evaluation of evaporative losses and insulation requirements and a description of the current analysis and experimental plans for testing insulated pressure vessels. The results show significant advantages to the use of insulated pressure vessels for light-duty vehicles.

  4. Unconventional Fermi surface in an insulating state

    Energy Technology Data Exchange (ETDEWEB)

    Harrison, Neil [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Tan, B. S. [Cambridge Univ., Cambridge (United Kingdom); Hsu, Y. -T. [Cambridge Univ., Cambridge (United Kingdom); Zeng, B. [National High Magnetic Field Lab., Tallahassee, FL (United States); Hatnean, M. Ciomaga [Univ. of Warwick, Coventry (United Kingdom); Zhu, Z. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Hartstein, M. [Cambridge Univ., Cambridge (United Kingdom); Kiourlappou, M. [Cambridge Univ., Cambridge (United Kingdom); Srivastava, A. [Cambridge Univ., Cambridge (United Kingdom); Johannes, M. D. [Center for Computational Materials Science, Washington, DC (United States); Murphy, T. P. [National High Magnetic Field Lab., Tallahassee, FL (United States); Park, J. -H. [National High Magnetic Field Lab., Tallahassee, FL (United States); Balicas, L. [National High Magnetic Field Lab., Tallahassee, FL (United States); Lonzarich, G. G. [Cambridge Univ., Cambridge (United Kingdom); Balakrishnan, G. [Univ. of Warwick, Coventry (United Kingdom); Sebastian, Suchitra E. [Cambridge Univ., Cambridge (United Kingdom)

    2015-07-17

    Insulators occur in more than one guise; a recent finding was a class of topological insulators, which host a conducting surface juxtaposed with an insulating bulk. Here, we report the observation of an unusual insulating state with an electrically insulating bulk that simultaneously yields bulk quantum oscillations with characteristics of an unconventional Fermi liquid. We present quantum oscillation measurements of magnetic torque in high-purity single crystals of the Kondo insulator SmB6, which reveal quantum oscillation frequencies characteristic of a large three-dimensional conduction electron Fermi surface similar to the metallic rare earth hexaborides such as PrB6 and LaB6. As a result, the quantum oscillation amplitude strongly increases at low temperatures, appearing strikingly at variance with conventional metallic behavior.

  5. Floating insulated conductors for heating subsurface formations

    Science.gov (United States)

    Burns, David; Goodwin, Charles R.

    2014-07-29

    A heating system for a subsurface formation includes a conduit located in a first opening in the subsurface formation. Three electrical conductors are located in the conduit. A return conductor is located inside the conduit. The return conductor is electrically coupled to the ends of the electrical conductors distal from the surface of the formation. Insulation is located inside the conduit. The insulation electrically insulates the three electrical conductors, the return conductor, and the conduit from each other.

  6. Aerogel Insulation to Support Cryogenic Technologies Project

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA is seeking a high performance thermal insulation material for cryogenic applications in space launch development. Many of the components in cryogenic...

  7. External insulation with cellular plastic materials

    DEFF Research Database (Denmark)

    Sørensen, Lars Schiøtt; Nielsen, Anker

    2014-01-01

    External thermal insulation composite systems (ETICS) can be used as extra insulation of existing buildings. The system can be made of cellular plastic materials or mineral wool. There is a European Technical guideline, ETAG 004, that describe the tests that shall be conducted on such systems....... This paper gives a comparison of systems with mineral wool and cellular plastic, based on experience from practice and literature. It is important to look at the details in the system and at long time stability of the properties such as thermal insulation, moisture and fire. Investigation of fire properties...... insulation....

  8. Hot-carrier-induced linear drain current and threshold voltage degradation for thin layer silicon-on-insulator field P-channel lateral double-diffused metal-oxide-semiconductor

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Xin; Qiao, Ming; He, Yitao; Li, Zhaoji; Zhang, Bo, E-mail: bozhang@uestc.edu.cn [State Key Laboratory of Electronic Thin Films and Integrated Devices, University of Electronic Science and Technology of China, Chengdu, Sichuan 610054 (China)

    2015-11-16

    Hot-carrier-induced linear drain current (I{sub dlin}) and threshold voltage (V{sub th}) degradations for the thin layer SOI field p-channel lateral double-diffused MOS (pLDMOS) are investigated. Two competition degradation mechanisms are revealed and the hot-carrier conductance modulation model is proposed. In the channel, hot-hole injection induced positive oxide trapped charge and interface trap gives rise to the V{sub th} increasing and the channel conductance (G{sub ch}) decreasing, then reduces I{sub dlin}. In the p-drift region, hot-electron injection induced negative oxide trapped charge enhances the conductance of drift doping resistance (G{sub d}), and then increases I{sub dlin}. Consequently, the eventual I{sub dlin} degradation is controlled by the competition of the two mechanisms due to conductance modulation in the both regions. Based on the model, it is explained that the measured I{sub dlin} anomalously increases while the V{sub th} is increasing with power law. The thin layer field pLDMOS exhibits more severe V{sub th} instability compared with thick SOI layer structure; as a result, it should be seriously evaluated in actual application in switching circuit.

  9. Characterization of Microporous Insulation, Microsil

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-06-15

    Microsil microporous insulation has been characterized by Lawrence Livermore National Laboratory for possible use in structural and thermal applications in the DPP-1 design. Qualitative test results have provided mechanical behavioral characteristics for DPP-1 design studies and focused on the material behavioral response to being crushed, cyclically loaded, and subjected to vibration for a confined material with an interference fit or a radial gap. Quantitative test results have provided data to support the DPP-1 FEA model analysis and verification and were used to determine mechanical property values for the material under a compression load. The test results are documented within this report.

  10. Photoexcitation dynamics in thin films of insulated molecular wires

    Science.gov (United States)

    Chang, M. H.; Frampton, M. J.; Anderson, H. L.; Herz, L. M.

    2006-12-01

    A study is presented on how encapsulation of conjugated polymer chains affects the motion of photoexcitations and the formation of interchain aggregates in solid films. It is shown that threading of a poly(diphenylene vinylene) backbone inside insulating cyclodextrins (rotaxination) and/or complexation of the chains with poly(ethylene oxide) are effective means of preventing the diffusion of excitons to nonradiative defect sites. Ultrafast time-resolved photoluminescence data reveal that excitation transfer between encapsulated chains is still possible and, for the case of rotaxination, is likely to be facilitated through close packing of end groups belonging to adjacent chains.

  11. Improvement on Condition Assessment Model for Oil-paper Insulation

    Institute of Scientific and Technical Information of China (English)

    LA Yuan; SHI Xuetao; CAO Wen; HE Baosheng; KE Chunjun; WU Kai; LONG Hongyu

    2013-01-01

    Identification of the aging condition and the failure probability of oil-paper insulation in transformer is important for improving the reliability of electric power transmission system and applying life cycle cost (LCC) management to electrical equipment.Based on data obtained in a series of multi-accelerated-aging experiments,two approaches for calculating failure probability of oil-paper insulation were compared in aspects of degree of polymerization (DP) and condition ranking.In the experiments,mineral oil and cellulose paper are subjected to electrical and thermal stresses,and several parameters,including dissolved gases' volume fraction,furfural content,moisture content,and degree of polymerization,are measured after the aging process.Results show that weight of carbon oxide,which has a close relationship with cellulose paper degradation,is much higher in DP model than in condition ranking model.Moreover,it is concluded that DP model is more practically accurate than condition ranking model,because aging of cellulose paper rather than mineral oil is the key and critical factor of oil-paper insulation aging.

  12. Silicon on insulator achieved using electrochemical etching

    Science.gov (United States)

    McCarthy, A.M.

    1997-10-07

    Bulk crystalline silicon wafers are transferred after the completion of circuit fabrication to form thin films of crystalline circuitry on almost any support, such as metal, semiconductor, plastic, polymer, glass, wood, and paper. In particular, this technique is suitable to form silicon-on-insulator (SOI) wafers, whereby the devices and circuits formed exhibit superior performance after transfer due to the removal of the silicon substrate. The added cost of the transfer process to conventional silicon fabrication is insignificant. No epitaxial, lift-off, release or buried oxide layers are needed to perform the transfer of single or multiple wafers onto support members. The transfer process may be performed at temperatures of 50 C or less, permits transparency around the circuits and does not require post-transfer patterning. Consequently, the technique opens up new avenues for the use of integrated circuit devices in high-brightness, high-resolution video-speed color displays, reduced-thickness increased-flexibility intelligent cards, flexible electronics on ultrathin support members, adhesive electronics, touch screen electronics, items requiring low weight materials, smart cards, intelligent keys for encryption systems, toys, large area circuits, flexible supports, and other applications. The added process flexibility also permits a cheap technique for increasing circuit speed of market driven technologies such as microprocessors at little added expense. 57 figs.

  13. Ferroelectric control of a Mott insulator.

    Science.gov (United States)

    Yamada, Hiroyuki; Marinova, Maya; Altuntas, Philippe; Crassous, Arnaud; Bégon-Lours, Laura; Fusil, Stéphane; Jacquet, Eric; Garcia, Vincent; Bouzehouane, Karim; Gloter, Alexandre; Villegas, Javier E; Barthélémy, Agnès; Bibes, Manuel

    2013-10-03

    The electric field control of functional properties is an important goal in oxide-based electronics. To endow devices with memory, ferroelectric gating is interesting, but usually weak compared to volatile electrolyte gating. Here, we report a very large ferroelectric field-effect in perovskite heterostructures combining the Mott insulator CaMnO3 and the ferroelectric BiFeO3 in its "supertetragonal" phase. Upon polarization reversal of the BiFeO3 gate, the CaMnO3 channel resistance shows a fourfold variation around room temperature, and a tenfold change at ~200 K. This is accompanied by a carrier density modulation exceeding one order of magnitude. We have analyzed the results for various CaMnO3 thicknesses and explain them by the electrostatic doping of the CaMnO3 layer and the presence of a fixed dipole at the CaMnO3/BiFeO3 interface. Our results suggest the relevance of ferroelectric gates to control orbital- or spin-ordered phases, ubiquitous in Mott systems, and pave the way toward efficient Mott-tronics devices.

  14. The net charge at interfaces between insulators

    Science.gov (United States)

    Bristowe, N. C.; Littlewood, P. B.; Artacho, Emilio

    2011-03-01

    The issue of the net charge at insulating oxide interfaces is briefly reviewed with the ambition of dispelling myths of such charges being affected by covalency and related charge density effects. For electrostatic analysis purposes, the net charge at such interfaces is defined by the counting of discrete electrons and core ion charges, and by the definition of the reference polarization of the separate, unperturbed bulk materials. The arguments are illustrated for the case of a thin film of LaAlO3 over SrTiO3 in the absence of free carriers, for which the net charge is exactly 0.5e per interface formula unit, if the polarization response in both materials is referred to zero bulk values. Further consequences of the argument are extracted for structural and chemical alterations of such interfaces, in which internal rearrangements are distinguished from extrinsic alterations (changes of stoichiometry, redox processes), only the latter affecting the interfacial net charge. The arguments are reviewed alongside the proposal of Stengel and Vanderbilt (2009 Phys. Rev. B 80 241103) of using formal polarization values instead of net interfacial charges, based on the interface theorem of Vanderbilt and King-Smith (1993 Phys. Rev. B 48 4442-55). Implications for non-centrosymmetric materials are discussed, as well as for interfaces for which the charge mismatch is an integer number of polarization quanta.

  15. Lateral amorphous selenium metal-insulator-semiconductor-insulator-metal photodetectors using ultrathin dielectric blocking layers for dark current suppression

    Science.gov (United States)

    Chang, Cheng-Yi; Pan, Fu-Ming; Lin, Jian-Siang; Yu, Tung-Yuan; Li, Yi-Ming; Chen, Chieh-Yang

    2016-12-01

    We fabricated amorphous selenium (a-Se) photodetectors with a lateral metal-insulator-semiconductor-insulator-metal (MISIM) device structure. Thermal aluminum oxide, plasma-enhanced chemical vapor deposited silicon nitride, and thermal atomic layer deposited (ALD) aluminum oxide and hafnium oxide (ALD-HfO2) were used as the electron and hole blocking layers of the MISIM photodetectors for dark current suppression. A reduction in the dark current by three orders of magnitude can be achieved at electric fields between 10 and 30 V/μm. The effective dark current suppression is primarily ascribed to electric field lowering in the dielectric layers as a result of charge trapping in deep levels. Photogenerated carriers in the a-Se layer can be transported across the blocking layers to the Al electrodes via Fowler-Nordheim tunneling because a high electric field develops in the ultrathin dielectric layers under illumination. Since the a-Se MISIM photodetectors have a very low dark current without significant degradation in the photoresponse, the signal contrast is greatly improved. The MISIM photodetector with the ALD-HfO2 blocking layer has an optimal signal contrast more than 500 times the contrast of the photodetector without a blocking layer at 15 V/μm.

  16. Metal-insulator transitions in LaTiO3 / CaTiO3 superlattices

    Science.gov (United States)

    Seo, Sung Seok A.; Lee, Ho Nyung

    2010-03-01

    Strongly correlated electrons at an interface of complex oxide heterostructures often show interesting behaviors that require an introduction of new physical concepts. For example, the metallic transport behavior found in the superlattices of a Mott insulator LaTiO3 and a band insulator SrTiO3 (STO) has established the concept of interfacial electronic reconstruction. In this work, we have studied the transport property of a new type of Mott/band insulator LaTiO3/CaTiO3 (LTO/CTO) superlattices grown by pulsed laser deposition (PLD). In order to rule out concerns about the PLD plume-triggered oxygen vacancies generated in STO substrates, which might influence transport measurement, and to investigate the effect of epitaxial strain, we have used insulating NdGaO3 substrates. While both LTO and CTO single films are highly insulating, we have observed intriguing metal-insulator transitions (MIT) in the LTO/CTO superlattices depending on the global LTO/CTO thickness ratio and temperature. (Note that LTO/STO superlattices are metallic at all temperatures (2-300 K)). In this talk, we will discuss the origin of the MIT in the scheme of self compensation mechanism of d-electrons at the hetero-interface between LTO and CTO.

  17. High temperature resistant cermet and ceramic compositions. [for thermal resistant insulators and refractory coatings

    Science.gov (United States)

    Phillips, W. M. (Inventor)

    1978-01-01

    High temperature oxidation resistance, high hardness and high abrasion and wear resistance are properties of cermet compositions particularly to provide high temperature resistant refractory coatings on metal substrates, for use as electrical insulation seals for thermionic converters. The compositions comprise a sintered body of particles of a high temperature resistant metal or metal alloy, preferably molybdenum or tungsten particles, dispersed in and bonded to a solid solution formed of aluminum oxide and silicon nitride, and particularly a ternary solid solution formed of a mixture of aluminum oxide, silicon nitride and aluminum nitride. Ceramic compositions comprising a sintered solid solution of aluminum oxide, silicon nitride and aluminum nitride are also described.

  18. Spin-transport-phenomena in metals, semiconductors, and insulators

    Energy Technology Data Exchange (ETDEWEB)

    Althammer, Matthias Klaus

    2012-07-19

    Assuming that one could deterministically inject, transport, manipulate, store and detect spin information in solid state devices, the well-established concepts of charge-based electronics could be transferred to the spin realm. This thesis explores the injection, transport, manipulation and storage of spin information in metallic conductors, semiconductors, as well as electrical insulators. On the one hand, we explore the spin-dependent properties of semiconducting zinc oxide thin films deposited via laser-molecular beam epitaxy (laser-MBE). After demonstrating that the zinc oxide films fabricated during this thesis have excellent structural, electrical, and optical properties, we investigate the spin-related properties by optical pump/probe, electrical injection/optical detection, and all electrical spin valve-based experiments. The two key results from these experiments are: (i) Long-lived spin states with spin dephasing times of 10 ns at 10 K related to donor bound excitons can be optically addressed. (ii) The spin dephasing times relevant for electrical transport-based experiments are {<=} 2 ns at 10 K and are correlated with structural quality. On the other hand we focus on two topics of current scientific interest: the comparison of the magnetoresistance to the magnetothermopower of conducting ferromagnets, and the investigation of pure spin currents generated in ferromagnetic insulator/normal metal hybrid structures. We investigate the magnetoresistance and magnetothermopower of gallium manganese arsenide and Heusler thin films as a function of external magnetic field orientation. Using a series expansion of the resistivity and Seebeck tensors and the inherent symmetry of the sample's crystal structure, we show that a full quantitative extraction of the transport tensors from such experiments is possible. Regarding the spin currents in ferromagnetic insulator/normal metal hybrid structures we studied the spin mixing conductance in yttrium iron garnet

  19. Möbius Kondo insulators

    Science.gov (United States)

    Chang, Po-Yao; Erten, Onur; Coleman, Piers

    2017-08-01

    Heavy fermion materials have recently attracted attention for their potential to combine topological protection with strongly correlated electron physics. To date, the ideas of topological protection have been restricted to the heavy fermion or `Kondo' insulators with the simplest point-group symmetries. Here we argue that the presence of nonsymmorphic crystal symmetries in many heavy fermion materials opens up a new family of topologically protected heavy electron systems. Re-examination of archival resistivity measurements in the nonsymmorphic heavy fermion insulators Ce3Bi4Pt3 and CeNiSn reveals the presence of a low-temperature conductivity plateau, making them candidate members of the new class of material. We illustrate our ideas with a specific model for CeNiSn, showing how glide symmetries generate surface states with a novel Möbius braiding that can be detected by ARPES or non-local conductivity measurements. One of the interesting effects of strong correlation is the development of partially localization or `Kondo breakdown' on the surfaces, which transforms Möbius surface states into quasi-one-dimensional conductors, with the potential for novel electronic phase transitions.

  20. Topological Insulator Nanowires and Nanoribbons

    KAUST Repository

    Kong, Desheng

    2010-01-13

    Recent theoretical calculations and photoemission spectroscopy measurements on the bulk Bi2Se3 material show that it is a three-dimensional topological insulator possessing conductive surface states with nondegenerate spins, attractive for dissipationless electronics and spintronics applications. Nanoscale topological insulator materials have a large surface-to-volume ratio that can manifest the conductive surface states and are promising candidates for devices. Here we report the synthesis and characterization of high quality single crystalline Bi2Se5 nanomaterials with a variety of morphologies. The synthesis of Bi 2Se5 nanowires and nanoribbons employs Au-catalyzed vapor-liquid-solid (VLS) mechanism. Nanowires, which exhibit rough surfaces, are formed by stacking nanoplatelets along the axial direction of the wires. Nanoribbons are grown along [1120] direction with a rectangular cross-section and have diverse morphologies, including quasi-one-dimensional, sheetlike, zigzag and sawtooth shapes. Scanning tunneling microscopy (STM) studies on nanoribbons show atomically smooth surfaces with ∼ 1 nm step edges, indicating single Se-Bi-Se-Bi-Se quintuple layers. STM measurements reveal a honeycomb atomic lattice, suggesting that the STM tip couples not only to the top Se atomic layer, but also to the Bi atomic layer underneath, which opens up the possibility to investigate the contribution of different atomic orbitais to the topological surface states. Transport measurements of a single nanoribbon device (four terminal resistance and Hall resistance) show great promise for nanoribbons as candidates to study topological surface states. © 2010 American Chemical Society.

  1. Thermal insulation properties of walls

    Directory of Open Access Journals (Sweden)

    Zhukov Aleksey Dmitrievich

    2014-05-01

    Full Text Available Heat-protective qualities of building structures are determined by the qualities of the used materials, adequate design solutions and construction and installation work of high quality. This rule refers both to the structures made of materials similar in their structure and nature and mixed, combined by a construction system. The necessity to ecaluate thermal conductivity is important for a product and for a construction. Methods for evaluating the thermal protection of walls are based on the methods of calculation, on full-scale tests in a laboratory or on objects. At the same time there is a reason to believe that even deep and detailed calculation may cause deviation of the values from real data. Using finite difference method can improve accuracy of the results, but it doesn’t solve all problems. The article discusses new approaches to evaluating thermal insulation properties of walls. The authors propose technique of accurate measurement of thermal insulation properties in single blocks and fragments of walls and structures.

  2. Degradation and cupric corrosion caused by corrosive sulfur in insulating oil; Zetsuen`yu no rekka to ryuka fushoku

    Energy Technology Data Exchange (ETDEWEB)

    Tsuchie, M.; Miyamoto, T. [Mitsubishi Electric Corp., Tokyo (Japan)

    1995-03-20

    As the voltages and capacities of transformers have been increased, a higher reliability of insulating oil has been demanded. Since the 1970s, sulfurization and streaming electrification of a copper product have attracted attention. In the 1970s, an insulating oil refining method was changed from sulfuric acid refining to hydrogenation refining. In the 1980s, an insulating oil to which benzotriazole (BTA) effective for suppression of streaming electrification is added came to be used. Although the degradation of an insulating oil and the sulfurization in the oil are different phenomena, it has been found out that copper takes part in both of these phenomena. This paper describes the examination of the effect of BTA on the oxidation degradation and sulfurization of insulating oil. The examination was made by using an oxidation degradation evaluation apparatus developed from the above-mentioned viewpoint. The results of the examination show that BTA is very effective in suppressing the oxidation degradation and sulfurization of insulating oil. 11 refs., 13 figs., 2 tabs.

  3. Resistive switching in a metal-insulator-metal device with γ-APTES as the insulator layer

    Science.gov (United States)

    Lin, Jing-Jenn; Lin, Shih-Hung; Wu, You-Lin

    2017-10-01

    Gamma-aminopropyltriethoxysilane (γ-APTES) is an organosilane material commonly used for biomedical sensing. Sensors with a γ-APTES surface layer have been reported for use in pH, DNA, and cell detection. However, no application of γ-APTES on resistive switching random access memory (RRAM) devices has yet been reported. In this paper, we report, for the first time, the resistive switching characteristics of using γ-APTES as the insulator layer in an RRAM device. The resistive switching of the γ-APTES layer embedded with ZnO nanoparticles is also investigated in this work. A unipolar resistive switching characteristic is found when the γ-APTES is employed as an insulator layer in a device with a metal-insulator-metal (MIM) structure. The stability and reliability of the resistive switching characteristics of the device can be improved after adding zinc oxide (ZnO) nanoparticles at the expense of reducing the ratio of the resistance of a high-resistance state (RHRS) to the resistance of a low-resistance state (RLRS).

  4. The Insulation Properties of Oil-Impregnated Insulation Paper Reinforced with Nano-TiO2

    OpenAIRE

    Ruijin Liao; Cheng Lv; Lijun Yang; Yiyi Zhang; Weiqiang Wu; Chao Tang

    2013-01-01

    Oil-impregnated insulation paper has been widely used in transformers because of its low cost and desirable physical and electrical properties. However, research to improve the insulation properties of oil-impregnated insulation paper is rarely found. In this paper, nano-TiO2 was used to stick to the surface of cellulose which was used to make insulation paper. After oil-impregnated insulation paper reinforced by nano-TiO2 was prepared, the tensile strength, breakdown strength, and dielectric...

  5. Insulation systems for superconducting transmission cables

    DEFF Research Database (Denmark)

    Tønnesen, Ole

    1996-01-01

    the electrical insulation is placed outside both the superconducting tube and the cryostat. The superconducting tube is cooled by liquid nitrogen which is pumped through the hollow part of the tube.2) The cryogenic dielectric design, where the electrical insulation is placed inside the cryostat and thus is kept...

  6. Improved insulator layer for MIS devices

    Science.gov (United States)

    Miller, W. E.

    1980-01-01

    Insulating layer of supersonic conductor such as LaF sub 3 has been shown able to impart improved electrical properties to photoconductive detectors and promises to improve other metal/insulator/semiconductor (MIS) devices, e.g., MOSFET and integrated circuits.

  7. Ceramic fibres for high temperature insulation

    Energy Technology Data Exchange (ETDEWEB)

    Padgett, G.C.

    1986-03-01

    Traditionally, refractory linings for high temperature plant and furnaces have comprised either brick or some form of concrete. In recent years, energy conservation has encouraged the greater use of high temperature insulation which is also available in either brick or a lightweight concrete. As an alternative, insulation can also be achieved using fibrous products or fibres combining low heat transfer with low heat capacity.

  8. Topological insulators: A romance with many dimensions

    Science.gov (United States)

    Manoharan, Hari C.

    2010-07-01

    Electric charges on the boundaries of certain insulators are programmed by topology to keep moving forward when they encounter an obstacle, rather than scattering backwards and increasing the resistance of the system. This is just one reason why topological insulators are one of the hottest topics in physics right now.

  9. Facade insulation with mineral wool. Fassadendaemmung mit Mineralwolle

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1992-10-01

    Mineral wool insulations have proved worthwhile in construction engineering as apart from their very good thermal and sound insulating properties and they can be used nearly everywhere in construction as means of fire protection. With the passing of the 3rd Waermeschutzverordnung (regulation about thermal insulation) the requirements on the insulation of buildings have drastically increased. In this article insulation systems for external walls with mineral wool are described which are suited to meet also this new high insulation standard. (orig.)

  10. Triple-glazed insulating unit with improved edge insulation

    Science.gov (United States)

    Goodwin, George B.; Buchanan, Michael J.

    2016-06-07

    An insulating unit includes a first spacer frame between first and second sheets, e.g. glass sheets, and a second spacer frame between the second sheet and a third sheet. A first surface of the first spacer frame is adhered to inner surface of the first sheet, and an opposite second surface of the first spacer frame is adhered to a first surface of the second sheet, by a moisture impervious adhesive layer. A first outer surface of the second spacer frame is adhered to a second surface of the second sheet, and an opposite second outer surface of the second spacer frame is adhered to an inner surface of the third sheet, by the adhesive layer. The first spacer frame and the second spacer frame have an offset of greater than zero.

  11. Triple-glazed insulating unit with improved edge insulation

    Energy Technology Data Exchange (ETDEWEB)

    Goodwin, George B.; Buchanan, Michael J.

    2016-06-07

    An insulating unit includes a first spacer frame between first and second sheets, e.g. glass sheets, and a second spacer frame between the second sheet and a third sheet. A first surface of the first spacer frame is adhered to inner surface of the first sheet, and an opposite second surface of the first spacer frame is adhered to a first surface of the second sheet, by a moisture impervious adhesive layer. A first outer surface of the second spacer frame is adhered to a second surface of the second sheet, and an opposite second outer surface of the second spacer frame is adhered to an inner surface of the third sheet, by the adhesive layer. The first spacer frame and the second spacer frame have an offset of greater than zero.

  12. Insulator Surface Flashover Due to UV Illumination

    Energy Technology Data Exchange (ETDEWEB)

    Javedani, J B; Houck, T L; Lahowe, D A; Vogtlin, G E; Goerz, D A

    2009-07-27

    The surface of an insulator under vacuum and under electrical charge will flashover when illuminated by a critical dose of ultra-violet (UV) radiation - depending on the insulator size and material, insulator cone angle, the applied voltage and insulator shot-history. A testbed comprised of an excimer laser (KrF, 248 nm, {approx}16 MW, 30 ns FWHM,), a vacuum chamber, and a negative polarity dc high voltage power supply ({le} -60 kV) were assembled to test 1.0 cm thick angled insulators for surface-flashover. Several candidate insulator materials, e.g. High Density Polyethylene (HDPE), Rexolite{reg_sign} 1400, Macor{trademark} and Mycalex, of varying cone angles were tested against UV illumination. Commercial energy meters were used to measure the UV fluence of the pulsed laser beam. In-house designed and fabricated capacitive probes (D-dots, >12 GHz bandwidth) were embedded in the anode electrode underneath the insulator to determine the time of UV arrival and time of flashover. Of the tested insulators, the +45 degree Rexolite insulator showed more resistance to UV for surface flashover; at UV fluence level of less than 13 mJ/cm{sup 2}, it was not possible to induce a flashover for up to -60 kV of DC potential across the insulator's surface. The probes also permitted the electrical charge on the insulator before and after flashover to be inferred. Photon to electron conversion efficiency for the surface of Rexolite insulator was determined from charge-balance equation. In order to understand the physical mechanism leading to flashover, we further experimented with the +45 degree Rexolite insulator by masking portions of the UV beam to illuminate only a section of the insulator surface; (1) the half nearest the cathode and subsequently, (2) the half nearest the anode. The critical UV fluence and time to flashover were measured and the results in each case were then compared with the base case of full-beam illumination. It was discovered that the time for the

  13. Thermophysical investigations of nanotechnological insulation materials

    Science.gov (United States)

    Lakatos, Ákos

    2017-07-01

    Nowadays, to sufficiently reduce the heat loss through the wall structures with the so-called traditional insulations (polystyrene and fibrous slabs), huge thicknesses (20 - 25 cm) must be applied. In some cases there is no place for their applications e.g.: historical or heritage builfings, since the use of nano-insulation materials (aerogel, vacuum ceramic paints) takes place. They are said to be much more efficient insulations than the above mentioned ones, since they should be used in thinner forms. In this article the thermal insulating capability of solid brick wall covered with a silica-aerogel slab with 1.3 cm, moreover with a vacuum ceramic hollow contained paint with 2 mm thick are investigated. As well as a literature review about the thermal conductivity of nano-technological insulation materials will be given. Comparison of the atomic and thermal diffusion will be also presented.

  14. Electrically Tunable Magnetism in Magnetic Topological Insulators

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Jing; Lian, Biao; Zhang, Shou-Cheng

    2015-07-14

    The external controllability of the magnetic properties in topological insulators would be important both for fundamental and practical interests. Here we predict the electric-field control of ferromagnetism in a thin film of insulating magnetic topological insulators. The decrease of band inversion by the application of electric fields results in a reduction of magnetic susceptibility, and hence in the modification of magnetism. Remarkably, the electric field could even induce the magnetic quantum phase transition from ferromagnetism to paramagnetism. We further propose a transistor device in which the dissipationless charge transport of chiral edge states is controlled by an electric field. In particular, the field-controlled ferromagnetism in a magnetic topological insulator can be used for voltage based writing of magnetic random access memories in magnetic tunnel junctions. The simultaneous electrical control of magnetic order and chiral edge transport in such devices may lead to electronic and spintronic applications for topological insulators.

  15. Topological Insulators Dirac Equation in Condensed Matters

    CERN Document Server

    Shen, Shun-Qing

    2012-01-01

    Topological insulators are insulating in the bulk, but process metallic states around its boundary owing to the topological origin of the band structure. The metallic edge or surface states are immune to weak disorder or impurities, and robust against the deformation of the system geometry. This book, Topological insulators, presents a unified description of topological insulators from one to three dimensions based on the modified Dirac equation. A series of solutions of the bound states near the boundary are derived, and the existing conditions of these solutions are described. Topological invariants and their applications to a variety of systems from one-dimensional polyacetalene, to two-dimensional quantum spin Hall effect and p-wave superconductors, and three-dimensional topological insulators and superconductors or superfluids are introduced, helping readers to better understand this fascinating new field. This book is intended for researchers and graduate students working in the field of topological in...

  16. Aging analyses of aircraft wire insulation

    Energy Technology Data Exchange (ETDEWEB)

    GILLEN,KENNETH T.; CLOUGH,ROGER LEE; CELINA,MATHIAS C.; AUBERT,JAMES H.; MALONE,G. MICHAEL

    2000-05-08

    Over the past two decades, Sandia has developed a variety of specialized analytical techniques for evaluating the long-term aging and stability of cable insulation and other related materials. These techniques have been applied to cable reliability studies involving numerous insulation types and environmental factors. This work has allowed the monitoring of the occurrence and progression of cable material deterioration in application environments, and has provided insights into material degradation mechanisms. It has also allowed development of more reliable lifetime prediction methodologies. As a part of the FAA program for intrusive inspection of aircraft wiring, they are beginning to apply a battery of techniques to assessing the condition of cable specimens removed from retired aircraft. It is anticipated that in a future part of this program, they may employ these techniques in conjunction with accelerated aging methodologies and models that the authros have developed and employed in the past to predict cable lifetimes. The types of materials to be assessed include 5 different wire types: polyimide, PVC/Glass/Nylon, extruded XL-polyalkene/PVDF, Poly-X, and XL-ETFE. This presentation provides a brief overview of the main techniques that will be employed in assessing the state of health of aircraft wire insulation. The discussion will be illustrated with data from their prior cable aging studies, highlighting the methods used and their important conclusions. A few of the techniques that they employ are widely used in aging studies on polymers, but others are unique to Sandia. All of their techniques are non-proprietary, and maybe of interest for use by others in terms of application to aircraft wiring analysis. At the end of this report is a list showing some leading references to papers that have been published in the open literature which provide more detailed information on the analytical techniques for elastomer aging studies. The first step in the

  17. On the two-dimensional metallic state in silicon-on-insulator structures

    OpenAIRE

    Brunthaler, G.; Prinz, A.; Pillwein, G.; Lindelof, P. E.; Ahopelto, J.

    2002-01-01

    It is shown that the electronic conduction in silicon-on-insulator (SOI) layers exhibits a metallic regime which is very similar to that in high-mobility Si-metal oxide semiconductor structures (MOS). The peak in the electron mobility versus density, the strong drop in resistivity and the critical concentration for the metal-insulator transition are all consistent. On the basis of our SOI data for the temperature and in-plane magnetic field dependence of the resistivity, we discuss several mo...

  18. Towards aging mechanisms of cross-linked polyethylene (XLPE) cable insulation materials in nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Shuaishuai; Fifield, Leonard S.; Bowler, Nicola

    2016-12-19

    Cross-linked polyethylene (XLPE) cable insulation material undergoes simultaneous, accelerated thermal and gamma-radiation aging to simulate the long-term aging environment within nuclear power plants (NPPs). A variety of materials characterization tests, including scanning electron microscopy, thermo-gravimetric analysis, differential scanning calorimetry, oxidation induction time, gel-fraction and dielectric properties measurement, are conducted on pristine and differently aged XLPE samples. A preliminary model of one possible aging mechanism of XLPE cable insulation material under gamma radiation at elevated temperature of 115 °C is suggested.

  19. On the Degradation Mechanism of Low-Voltage Underground Cable with Poly(Vinyl Chloride) Insulation

    Science.gov (United States)

    Tawancy, H. M.; Hassan, M.

    2016-06-01

    A study has been undertaken to determine the degradation mechanism leading to localized short-circuit failures of an underground low-voltage cable with PVC insulation. It is shown that that the insulation of outer sheath and conductor cores has been cracked by thermal degradation involving dehydrochlorination, oxidation, and loss of plasticizers leading to current leakage between the cores. Most evidence points out that overheating due to poor connection of copper wires as well as a chemically active soil has caused the observed degradation.

  20. Quantum Capacitance in Topological Insulators

    Science.gov (United States)

    Xiu, Faxian; Meyer, Nicholas; Kou, Xufeng; He, Liang; Lang, Murong; Wang, Yong; Yu, Xinxin; Fedorov, Alexei V.; Zou, Jin; Wang, Kang L.

    2012-01-01

    Topological insulators show unique properties resulting from massless, Dirac-like surface states that are protected by time-reversal symmetry. Theory predicts that the surface states exhibit a quantum spin Hall effect with counter-propagating electrons carrying opposite spins in the absence of an external magnetic field. However, to date, the revelation of these states through conventional transport measurements remains a significant challenge owing to the predominance of bulk carriers. Here, we report on an experimental observation of Shubnikov-de Haas oscillations in quantum capacitance measurements, which originate from topological helical states. Unlike the traditional transport approach, the quantum capacitance measurements are remarkably alleviated from bulk interference at high excitation frequencies, thus enabling a distinction between the surface and bulk. We also demonstrate easy access to the surface states at relatively high temperatures up to 60 K. Our approach may eventually facilitate an exciting exploration of exotic topological properties at room temperature. PMID:22993694

  1. Reconfigurable Microwave Photonic Topological Insulator

    Science.gov (United States)

    Goryachev, Maxim; Tobar, Michael E.

    2016-12-01

    Using full 3D finite-element simulation and underlining Hamiltonian models, we demonstrate reconfigurable photonic analogues of topological insulators on a regular lattice of tunable posts in a reentrant 3D lumped element-type system. The tunability allows a dynamical in situ change of media chirality and other properties via the alteration of the same parameter for all posts, and as a result, great flexibility in the choice of bulk-edge configurations. Additionally, one-way photon transport without an external magnetic field is demonstrated. The ideas are illustrated by using both full finite-element simulation as well as simplified harmonic oscillator models. Dynamical reconfigurability of the proposed systems paves the way to a class of systems that can be employed for random access, topological signal processing, and sensing.

  2. Reconfigurable Microwave Photonic Topological Insulator

    CERN Document Server

    Goryachev, Maxim

    2016-01-01

    We demonstrate reconfigurable photonic analogues of topological insulators on a regular lattice of tunable posts in a re-entrant 3D lumped element type system. The tunability allows dynamical {\\it in-situ} change of media chirality and other properties via change of a single post parameter, and as a result, great flexibility in choice of bulk/edge configurations. Additionally, one way photon transport without external magnetic field is demonstrated. The ideas are illustrated by using both full finite element simulation as well as simplified harmonic oscillator models. Reconfigurability of the proposed systems paves the wave to a new class of systems that can be employed for random access, topological signal processing and sensing.

  3. Topological Insulator Nanowires and Nanoribbons

    Energy Technology Data Exchange (ETDEWEB)

    Kong, D.S.

    2010-06-02

    Recent theoretical calculations and photoemission spectroscopy measurements on the bulk Bi{sub 2}Se{sub 3} material show that it is a three-dimensional topological insulator possessing conductive surface states with nondegenerate spins, attractive for dissipationless electronics and spintronics applications. Nanoscale topological insulator materials have a large surface-to-volume ratio that can manifest the conductive surface states and are promising candidates for devices. Here we report the synthesis and characterization of high quality single crystalline Bi{sub 2}Se{sub 3} nanomaterials with a variety of morphologies. The synthesis of Bi{sub 2}Se{sub 3} nanowires and nanoribbons employs Au-catalyzed vapor-liquid-solid (VLS) mechanism. Nanowires, which exhibit rough surfaces, are formed by stacking nanoplatelets along the axial direction of the wires. Nanoribbons are grown along [11-20] direction with a rectangular crosssection and have diverse morphologies, including quasi-one-dimensional, sheetlike, zigzag and sawtooth shapes. Scanning tunneling microscopy (STM) studies on nanoribbons show atomically smooth surfaces with {approx}1 nm step edges, indicating single Se-Bi-Se-Bi-Se quintuple layers. STM measurements reveal a honeycomb atomic lattice, suggesting that the STM tip couples not only to the top Se atomic layer, but also to the Bi atomic layer underneath, which opens up the possibility to investigate the contribution of different atomic orbitals to the topological surface states. Transport measurements of a single nanoribbon device (four terminal resistance and Hall resistance) show great promise for nanoribbons as candidates to study topological surface states.

  4. The Insulation Properties of Oil-Impregnated Insulation Paper Reinforced with Nano-TiO2

    Directory of Open Access Journals (Sweden)

    Ruijin Liao

    2013-01-01

    Full Text Available Oil-impregnated insulation paper has been widely used in transformers because of its low cost and desirable physical and electrical properties. However, research to improve the insulation properties of oil-impregnated insulation paper is rarely found. In this paper, nano-TiO2 was used to stick to the surface of cellulose which was used to make insulation paper. After oil-impregnated insulation paper reinforced by nano-TiO2 was prepared, the tensile strength, breakdown strength, and dielectric properties of the oil-impregnated insulation paper were investigated to determine whether the modified paper had a better insulation performance. The results show that there were no major changes in tensile strength, and the value of the breakdown strength was greatly improved from 51.13 kV/mm to 61.78 kV/mm. Also, the values of the relative dielectric constant, the dielectric loss, and conductivity declined. The discussion reveals that nano-TiO2 plays a major role in the phenomenon. Because of the existence of nano-TiO2, the contact interface of cellulose and oil was changed, and a large number of shallow traps were produced. These shallow traps changed the insulation properties of oil-impregnated insulation paper. The results show that the proposed solution offers a new method to improve the properties of oil-impregnated insulation paper.

  5. Development of High Performance Composite Foam Insulation with Vacuum Insulation Cores

    Energy Technology Data Exchange (ETDEWEB)

    Biswas, Kaushik [ORNL; Desjarlais, Andre Omer [ORNL; SmithPhD, Douglas [NanoPore, Inc.; LettsPhD, John [Firestone Building Products; YaoPhD, Jennifer [Firestone Building Products

    2016-01-01

    Development of a high performance thermal insulation (thermal resistance or R-value per inch of R-12 hr-ft2- F/Btu-in or greater), with twice the thermal resistance of state-of-the-art commercial insulation materials ( R6/inch for foam insulation), promises a transformational impact in the area of building insulation. In 2010, in the US, the building envelope-related primary energy consumption was 15.6 quads, of which 5.75 quads were due to opaque wall and roof sections; the total US consumption (building, industrial and transportation) was 98 quads. In other words, the wall and roof contribution was almost 6% of the entire US primary energy consumption. Building energy modeling analyses have shown that adding insulation to increase the R-value of the external walls of residential buildings by R10-20 (hr-ft2- F/Btu) can yield savings of 38-50% in wall-generated heating and cooling loads. Adding R20 will require substantial thicknesses of current commercial insulation materials, often requiring significant (and sometimes cost-prohibitive) alterations to existing buildings. This article describes the development of a next-generation composite insulation with a target thermal resistance of R25 for a 2 inch thick board (R12/inch or higher). The composite insulation will contain vacuum insulation cores, which are nominally R35-40/inch, encapsulated in polyisocyanurate foam. A recently-developed variant of vacuum insulation, called modified atmosphere insulation (MAI), was used in this research. Some background information on the thermal performance and distinguishing features of MAI has been provided. Technical details of the composite insulation development and manufacturing as well as laboratory evaluation of prototype insulation boards are presented.

  6. Oxidative stress profile in goats supplemented or not with selenium and vitamin E and submitted to scrotal insulationPerfil de marcadores do estresse oxidativo em caprinos suplementados ou não com selênio e vitamina E e submetidos à insulação escrotal

    Directory of Open Access Journals (Sweden)

    Maria Madalena Pessoa Guerra

    2011-12-01

    Full Text Available To evaluate the effect of supplementation with selenium and vitamin E in the diet of goats induced to scrotal insulation (SI on the profile of biochemical markers of systemic oxidative metabolism 12 animals were randomly divided into two groups: G1 - no supplementation G2 - supplemented with selenium (0.1 mg / kg body weight of sodium selenite and vitamin E (0.3 IU / kg body weight. At the end of the adjustment period of 30 days, the scrotal insulation (SI was performed with the placement of plastic bags in the testes for 18 days. Supplementation with Se + vitamin E began 60 days before induction of SI and maintained for 42 days after the end of SI, corresponding to post-insulation (PSI. Blood samples were obtained by jugular venipuncture to obtain total blood for analysis of reduced glutathione (GSH and plasma for analysis of thiobarbituric acid reactive substance (TBARS and determination of ferric reducing ability of plasma (FRAP. No effect of dietary supplementation with Se + vitamin E on the profile of all the variables studied, but there was systemic oxidative action understood by a significant decrease of GSH during the SI, with a gradual increase in the PSI period, as well as lower average of FRAP observed during the SI and the highest average in the period from PSI. It was concluded that analysis of the activity of reduced glutathione (GSH and concentrations of thiobarbituric acid reactive substances (TBARS and ferric reducing ability of plasma (FRAP are recommended laboratory methods to evaluate the systemic response to oxidative damage caused by thermal stress testis in goats.Para avaliar o efeito da suplementação com selênio e vitamina E na dieta de caprinos induzidos à insulação escrotal (IE sobre o perfil de indicadores bioquímicos do metabolismo oxidativo sistêmico foram utilizados 12 animais, os quais foram distribuídos aleatoriamente em dois grupos: G1 - sem suplementação; G2 - suplementados com selênio (0,1 mg/Kg de

  7. Excavationless Exterior Foundation Insulation Field Study

    Energy Technology Data Exchange (ETDEWEB)

    Schirber, T. [NorthernSTAR, Minneaplolis, MN (United States); Mosiman, G. [NorthernSTAR, Minneaplolis, MN (United States); Ojczyk, C. [NorthernSTAR, Minneaplolis, MN (United States)

    2014-09-01

    Building science research supports installing exterior (soil side) foundation insulation as the optimal method to enhance the hygrothermal performance of new homes. With exterior foundation insulation, water management strategies are maximized while insulating the basement space and ensuring a more even temperature at the foundation wall. However, such an approach can be very costly and disruptive when applied to an existing home, requiring deep excavation around the entire house. The NorthernSTAR Building America Partnership team implemented an innovative, minimally invasive foundation insulation upgrade technique on an existing home. The approach consisted of using hydrovac excavation technology combined with liquid insulating foam. The team was able to excavate a continuous 4 inches wide by 4 feet to 5 feet deep trench around the entire house, 128 linear feet, except for one small part under the stoop that was obstructed with concrete debris. The combination pressure washer and vacuum extraction technology also enabled the elimination of large trenches and soil stockpiles normally produced by backhoe excavation. The resulting trench was filled with liquid insulating foam, which also served as a water-control layer of the assembly. The insulation was brought above grade using a liquid foam/rigid foam hybrid system and terminated at the top of the rim joist. Cost savings over the traditional excavation process ranged from 23% to 50%. The excavationless process could result in even greater savings since replacement of building structures, exterior features, utility meters, and landscaping would be minimal or non-existent in an excavationless process.

  8. Excavationless Exterior Foundation Insulation Field Study

    Energy Technology Data Exchange (ETDEWEB)

    Schirber, T.; Mosiman, G.; Ojczyk, C.

    2014-10-01

    Building science research supports installing exterior (soil side) foundation insulation as the optimal method to enhance the hygrothermal performance of new homes. With exterior foundation insulation, water management strategies are maximized while insulating the basement space and ensuring a more even temperature at the foundation wall. However, such an approach can be very costly and disruptive when applied to an existing home, requiring deep excavation around the entire house. The NorthernSTAR Building America Partnership team implemented an innovative, minimally invasive foundation insulation upgrade technique on an existing home. The approach consisted of using hydrovac excavation technology combined with a liquid insulating foam. The team was able to excavate a continuous 4" wide by 4' to 5' deep trench around the entire house, 128 linear feet, except for one small part under the stoop that was obstructed with concrete debris. The combination pressure washer and vacuum extraction technology also enabled the elimination of large trenches and soil stockpiles normally produced by backhoe excavation. The resulting trench was filled with liquid insulating foam, which also served as a water-control layer of the assembly. The insulation was brought above grade using a liquid foam/rigid foam hybrid system and terminated at the top of the rim joist. Cost savings over the traditional excavation process ranged from 23% to 50%. The excavationless process could result in even greater savings since replacement of building structures, exterior features, utility meters, and landscaping would be minimal or non-existent in an excavationless process.

  9. Atomically flattening of Si surface of silicon on insulator and isolation-patterned wafers

    Science.gov (United States)

    Goto, Tetsuya; Kuroda, Rihito; Akagawa, Naoya; Suwa, Tomoyuki; Teramoto, Akinobu; Li, Xiang; Obara, Toshiki; Kimoto, Daiki; Sugawa, Shigetoshi; Ohmi, Tadahiro; Kamata, Yutaka; Kumagai, Yuki; Shibusawa, Katsuhiko

    2015-04-01

    By introducing high-purity and low-temperature Ar annealing at 850 °C, atomically flat Si surfaces of silicon-on-insulator (SOI) and shallow-trench-isolation (STI)-patterned wafers were obtained. In the case of the STI-patterned wafer, this low-temperature annealing and subsequent radical oxidation to form a gate oxide film were introduced into the complementary metal oxide semiconductor (CMOS) process with 0.22 µm technology. As a result, a test array circuit for evaluating the electrical characteristics of a very large number (>260,000) of metal oxide semiconductor field effect transistors (MOSFETs) having an atomically flat gate insulator/Si interface was successfully fabricated on a 200-mm-diameter wafer. By evaluating 262,144 nMOSFETs, it was found that not only the gate oxide reliability was improved, but also the noise amplitude of the gate-source voltage related to the random telegraph noise (RTN) was reduced owing to the introduction of the atomically flat gate insulator/Si interface.

  10. Ultra-Violet Induced Insulator Flashover

    Energy Technology Data Exchange (ETDEWEB)

    Javedani, J B; Houck, T L; Kelly, B T; Lahowe, D A; Shirk, M D; Goerz, D A

    2008-05-21

    Insulators are critical components in high-energy, pulsed power systems. It is known that the vacuum surface of the insulator will flashover when illuminated by ultraviolet (UV) radiation depending on the insulator material, insulator cone angle, applied voltage and insulator shot-history. A testbed comprised of an excimer laser (KrF, 248 nm, {approx} 2 MW/cm{sup 2}, 30 ns FWHM,), a vacuum chamber (low 1.0E-6 torr), and dc high voltage power supply (<60 kV) was assembled for insulator testing to measure the UV dose during a flashover event. Five in-house developed and calibrated fast D-Dot probes (>12 GHz, bandwidth) were embedded in the anode electrode underneath the insulator to determine the time of flashover with respect to UV arrival. A commercial energy meter were used to measure the UV fluence for each pulse. Four insulator materials High Density Polyethylene, Rexolite{reg_sign} 1400, Macor{trademark} and Mycalex with side-angles of 0, {+-}30, and {+-}45 degrees, 1.0 cm thick samples, were tested with a maximum UV fluence of 75 mJ/cm{sup 2} and at varying electrode charge (10 kV to 60 kV). This information clarified/corrected earlier published studies. A new phenomenon was observed related to the UV power level on flashover that as the UV pulse intensity was increased, the UV fluence on the insulator prior to flashover was also increased. This effect would bias the data towards higher minimum flashover fluence.

  11. Measure Guideline: Hybrid Foundation Insulation Retrofits

    Energy Technology Data Exchange (ETDEWEB)

    Ueno, K.; Lstiburek, J.

    2012-05-01

    This measure guideline provides recommendations for designs and variations for retrofit hybrid assemblies in improving interior foundation insulation and water management of basements. Variations include closed cell spray foam (ccSPF) with membrane waterproofing or air gap membrane drainage layers, rigid board foam insulation at flat walls (cast concrete or CMU block), a 'partial drainage' detail making use of the bulk water drainage that occurs through the field of a rubble stone wall, and non-drained spray foam assemblies (including slab insulation).

  12. Silicon on insulator self-aligned transistors

    Science.gov (United States)

    McCarthy, Anthony M.

    2003-11-18

    A method for fabricating thin-film single-crystal silicon-on-insulator (SOI) self-aligned transistors. Standard processing of silicon substrates is used to fabricate the transistors. Physical spaces, between the source and gate, and the drain and gate, introduced by etching the polysilicon gate material, are used to provide connecting implants (bridges) which allow the transistor to perform normally. After completion of the silicon substrate processing, the silicon wafer is bonded to an insulator (glass) substrate, and the silicon substrate is removed leaving the transistors on the insulator (glass) substrate. Transistors fabricated by this method may be utilized, for example, in flat panel displays, etc.

  13. High-Tech, Low-Temp Insulation

    Science.gov (United States)

    1998-01-01

    Under an SBIR (Small Business Innovative Research) contract with Ames, S.D. Miller & Associates developed new manufacturing methods for multi-layer metal spacecraft insulation that could significantly reduce launch weight and launch costs. The new honeycomb structure is more efficient than fibers for insulation. Honeycombs can be made from metals for high temperature uses, even plastic insulation from recycled milk bottles. Under development are blankets made from recycled milk bottles which will be field tested by the Red Cross and ambulance companies. Currently available are honeycomb mittens based on the same technology.

  14. Double layered tailorable advanced blanket insulation

    Science.gov (United States)

    Falstrup, D.

    1983-01-01

    An advanced flexible reusable surface insulation material for future space shuttle flights was investigated. A conventional fly shuttle loom with special modifications to weave an integral double layer triangular core fabric from quartz yarn was used. Two types of insulating material were inserted into the cells of the fabric, and a procedure to accomplish this was developed. The program is follow up of a program in which single layer rectangular cell core fabrics are woven and a single type of insulating material was inserted into the cells.

  15. Measure Guideline. Hybrid Foundation Insulation Retrofits

    Energy Technology Data Exchange (ETDEWEB)

    Ueno, K. [Building Science Corporation, Somerville, MA (United States); Lstiburek, J. [Building Science Corporation, Somerville, MA (United States)

    2012-05-01

    This measure guideline provides recommendations for designs and variations for retrofit hybrid assemblies in improving interior foundation insulation and water management of basements. Variations include closed cell spray foam (ccSPF) with membrane waterproofing or air gap membrane drainage layers, rigid board foam insulation at flat walls (cast concrete or CMU block), a “partial drainage” detail making use of the bulk water drainage that occurs through the field of a rubble stone wall, and non-drained spray foam assemblies (including slab insulation).

  16. Influence of high-dose nitrogen implantation on the positive charge density of the buried oxide of silicon-on-insulator wafers%高剂量注氮对注氧隔离硅材料埋氧层中正电荷密度的影响

    Institute of Scientific and Technical Information of China (English)

    唐海马; 郑中山; 张恩霞; 于芳; 李宁; 王宁娟; 李国花; 马红芝

    2011-01-01

    The influence of nitrogen implantation on the properties of silicon-on-insulator buried oxide using separation by oxygen implantation was studied. Nitrogen ions were implanted into the buried oxide layer with a high-dose of 1016 cm-2.The experimental results showed that the positive charge density of the nitrogen-implanted buried oxide was obviously increased, compared with the control sampes without nitrogen implantation. It was also found that the post-implantation annealing caused an additional increase of the positive charge density in the nitrogen implanted samples. However,annealing time displayed a small effect on the positive charge density of the nitrogen implanted buried oxide, compared with the significant increase induced by nitrogen implantation. Moreover, the capacitance-voltage results showed that the positive charge density of the unannealed sample with nitrogen implanted is approximately equal to that of the sample annealed at 1100 ℃ for 2. 5 h in N2 ambient, despite an additional increase brought with annealing, and the buried oxide of the sample after 0.5 h annealing has a maximum value of positive charge density. According to the simulating results,the nitrogen implantation resulted in a heavy damage to the buried oxide, a lot of silicon and oxygen vacancies were introduced in the buried oxide during implantation. However, the Fourier transform infrared spectroscopy of the samples indicates that implantation induced defects can be basically eliminated after an annealing at 1100 ℃ for 0. 5 h. The increase of the positive charge density of the nitrogen implanted buried oxide is ascribed to the accumulation of implanted nitrogen near the interface of buried oxide and silicon, which caused the break of weak Si - Si bonds and the production of positive silicon ions in the silicon-rich region of the buried oxide near the interface, and this conclusion is supported by the results of secondary ion mass spectrometry.%为研究注氮改性对注氧

  17. Photoluminescence response of colloidal quantum dots on VO2 film across metal to insulator transition.

    Science.gov (United States)

    Kuznetsov, Sergey N; Cheremisin, Alexander B; Stefanovich, Genrikh B

    2014-01-01

    We have proposed a method to probe metal to insulator transition in VO2 measuring photoluminescence response of colloidal quantum dots deposited on the VO2 film. In addition to linear luminescence intensity decrease with temperature that is well known for quantum dots, temperature ranges with enhanced photoluminescence changes have been found during phase transition in the oxide. Corresponding temperature derived from luminescence dependence on temperature closely correlates with that from resistance measurement during heating. The supporting reflectance data point out that photoluminescence response mimics a reflectance change in VO2 across metal to insulator transition. Time-resolved photoluminescence study did not reveal any significant change of luminescence lifetime of deposited quantum dots under metal to insulator transition. It is a strong argument in favor of the proposed explanation based on the reflectance data. 71.30. + h; 73.21.La; 78.47.jd.

  18. Effects of Ion Beam Irradiation on Nanoscale InOx Cooper-Pair Insulators

    Directory of Open Access Journals (Sweden)

    Srdjan Milosavljević

    2013-01-01

    Full Text Available This paper examines the effects of irradiating indium oxide films of nanoscale thickness by ion beams, when these films are in the Cooper-pair insulator state. Radiation effects are predicted on the basis of Monte Carlo simulations of ion transport. Results of numerical experiments are interpreted within the theoretical model of a Cooper-pair insulator. The study suggests that radiation-induced changes in InOx films exposed to ion beams could significantly alter their current-voltage characteristics and that a transition to a metallic state is possible, due to radiation-induced perturbation of the fine-tuned granular structure. Furthermore, incident and displaced ions can break up enough Cooper pairs in InOx films to cause dissolution of this specific insulating state.

  19. Percolative Metal-Insulator transition in the doped Hubbard-Holstein model with the Gutzwiller Approach

    Science.gov (United States)

    Moradi Kurdestany, Jamshid; Satpathy, Sashi

    Motivated by the recent progress in understanding of Mott insulators away from half filling, observed in many perovskite oxides, we study the metal-insulator transition in the Hubbard-Holstein model, which contains both the Coulomb and the electron-lattice (Jahn Teller) interactions by using the Gutzwiller variational method. We find that strong electron-lattice Interaction leads to phase separation, which however can be frustrated due to the long-range Coulomb interaction, resulting in a mixed phase consisting of puddles of metallic phases embedded in an insulating matrix. When the dopant concentration exceeds a threshold value xc , the metallic part forms a percolating network leading to metallic conduction. Depending on the strength of the electron-lattice interaction, xc can be of the order of 0.05 - 0.20 or so, which is the typical value observed in the perovskites.

  20. Enhanced Magnetic Proximity Effect at Ferromagnetic Insulator / Magnetic Topological Insulator Interface

    Science.gov (United States)

    Li, Mingda; Chang, Cui-Zu; Kirby, Brian; Jamer, Michelle E.; Cui, Wenping; Wu, Lijun; Wei, Peng; Zhu, Yimei; Heiman, Don; Li, Ju; Moodera, Jagadeesh; MIT Team; NIST Team; Northeastern University Collaboration; Boston College Collaboration; Brookhaven National Lab Collaboration

    Magnetic proximity effect at magnetic insulator / topological insulator interface provides a promising approach to realize low-dissipation quantum devices. However, the commonly used magnetic insulators have in-plane anisotropy hence cannot magnetize topological insulator. Here we report an enhancement of proximity exchange coupling in ferromagnetic insulator / magnetic topological insulator EuS / Sb2-xVxTe3 hybrid heterostructure, where proximity effect is enhanced by a factor of 3 through the Vanadium doping. Moreover, an artificial antiferromagnetic-like structure is created between two strong ferromagnets, which may account for the proximity effect enhancement. The interplay between the proximity effect and doping in hybrid heterostructure provides insights into the engineering of magnetic ordering.

  1. Electromagnetic Nondestructive Evaluation of Wire Insulation and Models of Insulation Material Properties

    Science.gov (United States)

    Bowler, Nicola; Kessler, Michael R.; Li, Li; Hondred, Peter R.; Chen, Tianming

    2012-01-01

    Polymers have been widely used as wiring electrical insulation materials in space/air-craft. The dielectric properties of insulation polymers can change over time, however, due to various aging processes such as exposure to heat, humidity and mechanical stress. Therefore, the study of polymers used in electrical insulation of wiring is important to the aerospace industry due to potential loss of life and aircraft in the event of an electrical fire caused by breakdown of wiring insulation. Part of this research is focused on studying the mechanisms of various environmental aging process of the polymers used in electrical wiring insulation and the ways in which their dielectric properties change as the material is subject to the aging processes. The other part of the project is to determine the feasibility of a new capacitive nondestructive testing method to indicate degradation in the wiring insulation, by measuring its permittivity.

  2. 16 CFR 460.2 - What is home insulation.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false What is home insulation. 460.2 Section 460.2 Commercial Practices FEDERAL TRADE COMMISSION TRADE REGULATION RULES LABELING AND ADVERTISING OF HOME INSULATION § 460.2 What is home insulation. Insulation is any material mainly used to slow down heat flow....

  3. Samarium Hexaboride: The First True 3D Topological Insulator?

    Science.gov (United States)

    Wolgast, Steven G.

    The recent theoretical prediction of a topologically protected surface state in the mixed-valent insulator SmB6 has motivated a series of charge transport studies, which are presented here. It is first studied using a specialized configuration designed to distinguish bulk-dominated conduction from surface-dominated conduction. As the material is cooled below 4 K, it exhibits a crossover from thermally activated bulk transport to metallic surface conduction with a fully insulating bulk. The robustness and magnitude of the surface conductivity, as is manifest in the literature of SmB6, is strong evidence for the topological insulator (TI) metallic surface states predicted for this material. This resolves a decades-old puzzle surrounding the low-temperature behavior of SmB6. Next, the magnetotransport properties of the surface are investigated using a Corbino disk geometry, which can directly measure the conductivity of individual surfaces. Both (011) and (001) crystal surfaces show a strong negative magnetoresistance at all magnetic field angles, due primarily to changes in the carrier density. The low mobility value accounts for the failure so far to observe Shubnikov-de Haas oscillations below 95 T. Small variations in the mobility and temperature dependence suggest a suppression of Kondo scattering from native oxide-layer magnetic moments. At low fields, a dynamical field-sweep-rate-dependent hysteretic behavior is observed. It persists at the slowest sweep rates, and cannot be explained by quantum interference corrections; it is likely due to extrinsic effects such as the magnetocaloric effect or glassy ordering of the native oxide moments. Pulsed magnetic field measurements up to 60 T at temperatures throughout the crossover regime clearly distinguish the surface magnetoresistance from the bulk magnetoresistance. The bulk magnetoresistance is due to a reduction in the bulk gap with increasing magnetic field. Finally, small subsurface cracks formed in SmB6 via

  4. Magnetic Insulator Thin Films and Induced Magneto-Transport Effect at Normal Metal / Magnetic Insulator Interface

    OpenAIRE

    2013-01-01

    The discipline of spintronics with magnetic insulators (MI) has attracted extensive attention in both research and application interests. Yttrium iron garnet (YIG) is a ferrimagnetic insulator which is called the spin Seebeck insulator, for its supports of pure spin currents generation. Non-magnetic metals (NM) with strong spin-orbit interaction (e.g. Pd, Pt), are used as either spin current generator or detector based on the spin Hall effect (SHE) or the inverse spin Hall effect (ISHE). The ...

  5. Spin Seebeck effect in insulating epitaxial γ-Fe2O3 thin films

    Science.gov (United States)

    Jiménez-Cavero, P.; Lucas, I.; Anadón, A.; Ramos, R.; Niizeki, T.; Aguirre, M. H.; Algarabel, P. A.; Uchida, K.; Ibarra, M. R.; Saitoh, E.; Morellón, L.

    2017-02-01

    We report the fabrication of high crystal quality epitaxial thin films of maghemite (γ-Fe2O3), a classic ferrimagnetic insulating iron oxide. Spin Seebeck effect (SSE) measurements in γ-Fe2O3/Pt bilayers as a function of sample preparation conditions and temperature yield a SSE coefficient of 0.5(1) μV/K at room temperature. Dependence on temperature allows us to estimate the magnon diffusion length in maghemite to be in the range of tens of nanometers, in good agreement with that of conducting iron oxide magnetite (Fe3O4), establishing the relevance of spin currents of magnonic origin in magnetic iron oxides.

  6. Chromatin domain boundaries: insulators and beyond

    Institute of Scientific and Technical Information of China (English)

    Gong Hong WEI; De Pei LIU; Chih Chuan LIANG

    2005-01-01

    The eukaryotic genome is organized into functionally and structurally distinct domains, representing regulatory units for gene expression and chromosome behavior. DNA sequences that mark the border between adjacent domains are the insulators or boundary elements, which are required in maintenance of the function of different domains. Some insulators need others enable to play insulation activity. Chromatin domains are defined by distinct sets of post-translationally modified histones. Recent studies show that these histone modifications are also involved in establishment of sharp chromatin boundaries in order to prevent the spreading of distinct domains. Additionally, in some loci, the high-order chromatin structures for long-range looping interactions also have boundary activities, suggesting a correlation between insulators and chromatin loop domains. In this review, we will discuss recent progress in the field of chromatin domain boundaries.

  7. CTCF: insights into insulator function during development

    National Research Council Canada - National Science Library

    Herold, Martin; Bartkuhn, Marek; Renkawitz, Rainer

    2012-01-01

    .... The nuclear protein CCCTC-binding factor (CTCF) when bound to insulator sequences can prevent undesirable crosstalk between active and inactive genomic regions, and it can also shield particular genes from enhancer function, a role that has many...

  8. Radiation degradation of plastic insulating materials

    Science.gov (United States)

    Bartoníček, B.; Hnát, V.; Janovský, I.; Pejša, R.

    1995-02-01

    Several types of polymeric compounds, used as insulating and sheathing materials of cables, were subjected to accelerated thermal and radiation ageing and to LOCA test. The stability of materials was evaluated via their mechanical properties, namely strain at break.

  9. Conductor-insulator quantum phase transitions

    CERN Document Server

    Trivedi, Nandini; Valles, James M

    2012-01-01

    When many particles come together how do they organise themselves? And what destroys this organisation? Combining experiments and theory, this book describes intriguing quantum phases - metals, superconductors and insulators - and transitions between them.

  10. Sprayable Thermal Insulation for Cryogenic Tanks Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Sprayable Thermal Insulation for Cryogenic Tanks (STICT) is a thermal management system applied by either an automated or manual spraying process with less...

  11. Feasibility of Integrated Insulation in Rammed Earth

    Science.gov (United States)

    Stone, C.; Balintova, M.; Holub, M.

    2015-11-01

    Building Codes in Europe stipulate strict thermal performance criteria which any traditional rammed earth recipe cannot meet. This does not infer that the material itself is inferior; it has many other face saving attributes such as low embodied energy, high workability, sound insulation, fire resistance, aesthetics, high diffusivity and thermal accumulation properties. Integrated insulation is experimented with, to try achieve a 0.22 [W/(m2.K)] overall coefficient of heat transfer for walls required by 2015 Slovak standards, without using external insulation or using technologically complex interstitial insulation. This has the added aesthetic benefit of leaving the earth wall exposed to the external environment. Results evaluate the feasibility of this traditional approach.

  12. (AJST) EFFECTS OF GROUND INSULATION AND GREENHOUSE ...

    African Journals Online (AJOL)

    NORBERT OPIYO AKECH

    of plastic digester to produce biogas under natural and greenhouse microenvironment. The specific ... and hydrogen sulphide (H2S). Biogas ... the effect of ground insulation on biogas production. ..... Methane Generation from Human, Animal.

  13. Topological insulators Dirac equation in condensed matter

    CERN Document Server

    Shen, Shun-Qing

    2017-01-01

    This new edition presents a unified description of these insulators from one to three dimensions based on the modified Dirac equation. It derives a series of solutions of the bound states near the boundary, and describes the current status of these solutions. Readers are introduced to topological invariants and their applications to a variety of systems from one-dimensional polyacetylene, to two-dimensional quantum spin Hall effect and p-wave superconductors, three-dimensional topological insulators and superconductors or superfluids, and topological Weyl semimetals, helping them to better understand this fascinating field. To reflect research advances in topological insulators, several parts of the book have been updated for the second edition, including: Spin-Triplet Superconductors, Superconductivity in Doped Topological Insulators, Detection of Majorana Fermions and so on. In particular, the book features a new chapter on Weyl semimetals, a topic that has attracted considerable attention and has already b...

  14. Thermal insulation performance of green roof systems

    Energy Technology Data Exchange (ETDEWEB)

    Celik, Serdar; Morgan, Susan; Retzlaff, William; Once, Orcun [southern Illinois University (United States)], e-mail: scelik@siue.edu, e-mail: smorgan@siue.edu, e-mail: wretzla@siue.edu, e-mail: oonce@siue.edu

    2011-07-01

    With the increasing costs of energy, good building insulation has become increasingly important. Among existing insulation techniques is the green roof system, which consists of covering the roof of a building envelop with plants. The aim of this paper is to assess the impact of vegetation type and growth media on the thermal performance of green roof systems. Twelve different green roof samples were made with 4 different growth media and 3 sedum types. Temperature at the sample base was recorded every 15 minutes for 3 years; the insulation behavior was then analysed. Results showed that the insulation characteristics were achieved with a combination of haydite and sedum sexangulare. This study demonstrated that the choice of growth media and vegetation is important to the green roof system's performance; further research is required to better understand the interactions between growth media and plant roots.

  15. Sizable band gap in organometallic topological insulator

    Science.gov (United States)

    Derakhshan, V.; Ketabi, S. A.

    2017-01-01

    Based on first principle calculation when Ceperley-Alder and Perdew-Burke-Ernzerh type exchange-correlation energy functional were adopted to LSDA and GGA calculation, electronic properties of organometallic honeycomb lattice as a two-dimensional topological insulator was calculated. In the presence of spin-orbit interaction bulk band gap of organometallic lattice with heavy metals such as Au, Hg, Pt and Tl atoms were investigated. Our results show that the organometallic topological insulator which is made of Mercury atom shows the wide bulk band gap of about ∼120 meV. Moreover, by fitting the conduction and valence bands to the band-structure which are produced by Density Functional Theory, spin-orbit interaction parameters were extracted. Based on calculated parameters, gapless edge states within bulk insulating gap are indeed found for finite width strip of two-dimensional organometallic topological insulators.

  16. Repairing Damaged Power-Cable Insulation

    Science.gov (United States)

    Baker, G. E.

    1984-01-01

    Simple method saves time, money, and material. In new method cable remains in place while new insulation is applied to damaged portion. Method results in new terminations with safety factor equal to that of any portion of cable.

  17. Thermal conductivity of thermal-battery insulations

    Energy Technology Data Exchange (ETDEWEB)

    Guidotti, R.A.; Moss, M.

    1995-08-01

    The thermal conductivities of a variety of insulating materials used in thermal batteries were measured in atmospheres of argon and helium using several techniques. (Helium was used to simulate the hydrogen atmosphere that results when a Li(Si)/FeS{sub 2} thermal battery ages.) The guarded-hot-plate method was used with the Min-K insulation because of its extremely low thermal conductivity. For comparison purposes, the thermal conductivity of the Min-K insulating board was also measured using the hot-probe method. The thermal-comparator method was used for the rigid Fiberfrax board and Fiberfrax paper. The thermal conductivity of the paper was measured under several levels of compression to simulate the conditions of the insulating wrap used on the stack in a thermal battery. The results of preliminary thermal-characterization tests with several silica aerogel materials are also presented.

  18. Sprayable Thermal Insulation for Cryogenic Tanks Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The innovation addressed in this proposal is Sprayable Thermal Insulation for Cryogenic Tanks, or STICT. This novel system could be applied in either an automated or...

  19. Insulation of nonlinear and random vibrations in the mining industry. [elastodynamic response of rubber insulator

    Science.gov (United States)

    Zeveleanu, C.

    1974-01-01

    The insulation of nonlinear and random vibrations is considered for some ore preparing and sorting implements: rotary crushers, resonance screens, hammer mills, etc. The appearance of subharmonic vibrations is analyzed, and the conditions for their appearance are determined. A method is given for calculating the insulation of these vibrations by means of elastic elements made of rubber. The insulation of the random vibrations produced by Symons crushers is calculated by determining the transmissability and deformation of the insulation system for a narrow band random response.

  20. High-Performance Slab-on-Grade Foundation Insulation Retrofits

    Energy Technology Data Exchange (ETDEWEB)

    Goldberg, Louise F. [NorthernSTAR, St. Paul, MN (United States); Mosiman, Garrett E. [NorthernSTAR, St. Paul, MN (United States)

    2015-09-01

    A more accurate assessment of slab-on-grade foundation insulation energy savings than traditionally possible is now feasible. This has been enabled by advances in whole building energy simulation with 3-dimensional foundation modelling integration at each time step together with an experimental measurement of the site energy savings of SOG foundation insulation. Ten SOG insulation strategies were evaluated on a test building to identify an optimum retrofit insulation strategy in a zone 6 climate (Minneapolis, MN). The optimum insulation strategy in terms of energy savings and cost effectiveness consisted of two components: (a) R-20 XPS insulation above grade, and, (b) R-20 insulation at grade (comprising an outer layer of R-10 insulation and an interior layer of R-12 poured polyurethane insulation) tapering to R-10 XPS insulation at half the below-grade wall height (the lower half of the stem wall was uninsulated).

  1. Materials and Theory of Topological Insulators

    Science.gov (United States)

    2012-10-30

    Jürgen Kübler, Shou-Cheng Zhang, Claudia Felser. Topological Insulators in Ternary Compounds with a Honeycomb Lattice, Physical Review Letters , (04...Patents Submitted Patents Awarded Awards Europhysics Prize, Awarded by the European Physical Society. (2010) Election to the American Academy of Arts...Felser, “Topological Insulators in Ternary Compounds with a Honeycomb Lattice”, Phys. Rev. Lett. 106, 156402, (2011). Awards Europhysics Prize

  2. T-Duality and Topological Insulators

    CERN Document Server

    Mathai, Varghese

    2015-01-01

    It is well known that topological insulators are classified by a family of groups, which coincidentally also classifies D-brane charges on orientifolds in string theory. In this letter, we extend this correlation via a geometric analog of the real Fourier transform to obtain a novel duality of topological insulators that can be viewed as a condensed matter analog of T-duality in string theory.

  3. Measure Guideline. Internal Insulation of Masonry Walls

    Energy Technology Data Exchange (ETDEWEB)

    Straube, J. F. [Building Science Corporation (BSC), Somerville, MA (United States); Ueno, K. [Building Science Corporation (BSC), Somerville, MA (United States); Schumacher, C. J. [Building Science Corporation (BSC), Somerville, MA (United States)

    2012-07-01

    This measure guideline provides recommendations for interior insulation assemblies that control interstitial condensation and durability risks; recommendations for acceptable thermal performance are also provided. An illustrated guide of high-risk exterior details (which concentrate bulk water), and recommended remediation details is provided. This is followed by a recommended methodology for risk assessment of a masonry interior insulation project: a series of steps are suggested to assess the risks associated with this retrofit, with greater certainty with added steps.

  4. Measure Guideline: Internal Insulation of Masonry Walls

    Energy Technology Data Exchange (ETDEWEB)

    Straube, J. F.; Ueno, K.; Schumacher, C. J.

    2012-07-01

    This measure guideline provides recommendations for interior insulation assemblies that control interstitial condensation and durability risks; recommendations for acceptable thermal performance are also provided. An illustrated guide of high-risk exterior details (which concentrate bulk water), and recommended remediation details is provided. This is followed by a recommended methodology for risk assessment of a masonry interior insulation project: a series of steps are suggested to assess the risks associated with this retrofit, with greater certainty with added steps.

  5. Repeatability of Cryogenic Multilayer Insulation

    Science.gov (United States)

    Johnson, W. L.; Vanderlaan, M.; Wood, J. J.; Rhys, N. O.; Guo, W.; Van Sciver, S.; Chato, D. J.

    2017-01-01

    Due to the variety of requirements across aerospace platforms, and one off projects, the repeatability of cryogenic multilayer insulation has never been fully established. The objective of this test program is to provide a more basic understanding of the thermal performance repeatability of MLI systems that are applicable to large scale tanks. There are several different types of repeatability that can be accounted for: these include repeatability between multiple identical blankets, repeatability of installation of the same blanket, and repeatability of a test apparatus. The focus of the work in this report is on the first two types of repeatability. Statistically, repeatability can mean many different things. In simplest form, it refers to the range of performance that a population exhibits and the average of the population. However, as more and more identical components are made (i.e. the population of concern grows), the simple range morphs into a standard deviation from an average performance. Initial repeatability testing on MLI blankets has been completed at Florida State University. Repeatability of five GRC provided coupons with 25 layers was shown to be +/- 8.4 whereas repeatability of repeatedly installing a single coupon was shown to be +/- 8.0. A second group of 10 coupons have been fabricated by Yetispace and tested by Florida State University, through the first 4 tests, the repeatability has been shown to be +/- 16. Based on detailed statistical analysis, the data has been shown to be statistically significant.

  6. Spintronics Based on Topological Insulators

    Science.gov (United States)

    Fan, Yabin; Wang, Kang L.

    2016-10-01

    Spintronics using topological insulators (TIs) as strong spin-orbit coupling (SOC) materials have emerged and shown rapid progress in the past few years. Different from traditional heavy metals, TIs exhibit very strong SOC and nontrivial topological surface states that originate in the bulk band topology order, which can provide very efficient means to manipulate adjacent magnetic materials when passing a charge current through them. In this paper, we review the recent progress in the TI-based magnetic spintronics research field. In particular, we focus on the spin-orbit torque (SOT)-induced magnetization switching in the magnetic TI structures, spin-torque ferromagnetic resonance (ST-FMR) measurements in the TI/ferromagnet structures, spin pumping and spin injection effects in the TI/magnet structures, as well as the electrical detection of the surface spin-polarized current in TIs. Finally, we discuss the challenges and opportunities in the TI-based spintronics field and its potential applications in ultralow power dissipation spintronic memory and logic devices.

  7. Topological insulators in random potentials

    Science.gov (United States)

    Pieper, Andreas; Fehske, Holger

    2016-01-01

    We investigate the effects of magnetic and nonmagnetic impurities on the two-dimensional surface states of three-dimensional topological insulators (TIs). Modeling weak and strong TIs using a generic four-band Hamiltonian, which allows for a breaking of inversion and time-reversal symmetries and takes into account random local potentials as well as the Zeeman and orbital effects of external magnetic fields, we compute the local density of states, the single-particle spectral function, and the conductance for a (contacted) slab geometry by numerically exact techniques based on kernel polynomial expansion and Green's function approaches. We show that bulk disorder refills the surface-state Dirac gap induced by a homogeneous magnetic field with states, whereas orbital (Peierls-phase) disorder preserves the gap feature. The former effect is more pronounced in weak TIs than in strong TIs. At moderate randomness, disorder-induced conducting channels appear in the surface layer, promoting diffusive metallicity. Random Zeeman fields rapidly destroy any conducting surface states. Imprinting quantum dots on a TI's surface, we demonstrate that carrier transport can be easily tuned by varying the gate voltage, even to the point where quasibound dot states may appear.

  8. Influence of Moisture on the Electrical Properties of XLPE Insulation

    OpenAIRE

    Mecheri, Yacine; Nedjar, Mohamed; Lamure, Alain; Aufray, Maëlenn; Drouet, Christophe

    2010-01-01

    International audience; During their operating service, insulated power cables can be exposed to wet environment. The presence of moisture in cables surroundings may affect the properties of the used insulation material for instance, XLPE widely employed in MV and HV power cables insulation and therefore the reliability of the insulated cables. In order to examine the influence of wet aging conditions on the performances of XLPE insulated cables,samples (plates moulded from granules HFDE 4201...

  9. Development of insulating coatings for liquid metal blankets

    Energy Technology Data Exchange (ETDEWEB)

    Malang, S.; Borgstedt, H.U. [Kernforschungszentrum Karlsruhe GmbH (Germany); Farnum, E.H. [Los Alamos National Lab., NM (United States); Natesan, K. [Argonne National Lab., IL (United States); Vitkovski, I.V. [Efremov Inst., St. Petersburg (Russian Federation). MHD-Machines Lab.

    1994-07-01

    It is shown that self-cooled liquid metal blankets are feasible only with electrically insulating coatings at the duct walls. The requirements on the insulation properties are estimated by simple analytical models. Candidate insulator materials are selected based on insulating properties and thermodynamic consideration. Different fabrication technologies for insulating coatings are described. The status of the knowledge on the most crucial feasibility issue, the degradation of the resisivity under irradiation, is reviewed.

  10. Composite aerogel insulation for cryogenic liquid storage

    Science.gov (United States)

    Kyeongho, Kim; Hyungmook, Kang; Soojin, Shin; In Hwan, Oh; Changhee, Son; Hyung, Cho Yun; Yongchan, Kim; Sarng Woo, Karng

    2017-02-01

    High porosity materials such as aerogel known as a good insulator in a vacuum range (10-3 ∼ 1 Torr) was widely used to storage and to transport cryogenic fluids. It is necessary to be investigated the performance of aerogel insulations for cryogenic liquid storage in soft vacuum range to atmospheric pressure. A one-dimensional insulating experimental apparatus was designed and fabricated to consist of a cold mass tank, a heat absorber and an annular vacuum space with 5-layer (each 10 mm thickness) of the aerogel insulation materials. Aerogel blanket for cryogenic (used maximum temperature is 400K), aerogel blanket for normal temperature (used maximum temperature is 923K), and combination of the two kinds of aerogel blankets were 5-layer laminated between the cryogenic liquid wall and the ambient wall in vacuum space. Also, 1-D effective thermal conductivities of the insulation materials were evaluated by measuring boil-off rate from liquid nitrogen and liquid argon. In this study, the effective thermal conductivities and the temperature-thickness profiles of the two kinds of insulators and the layered combination of the two different aerogel blankets were presented.

  11. Design Tool for Cryogenic Thermal Insulation Systems

    Energy Technology Data Exchange (ETDEWEB)

    Demko, Jonathan A [ORNL; Fesmire, J. E. [NASA Kennedy Space Center, Kennedy Space Center, Florida; Augustynowicz, S. D. [Sierra Lobo Inc., Kennedy Space Center, Florida

    2008-01-01

    Thermal isolation of low-temperature systems from ambient environments is a constant issue faced by practitioners of cryogenics. For energy-efficient systems and processes to be realized, thermal insulation must be considered as an integrated system, not merely an add-on element. A design tool to determine the performance of insulation systems for comparative trade-off studies of different available material options was developed. The approach is to apply thermal analysis to standard shapes (plane walls, cylinders, spheres) that are relatively simple to characterize with a one-dimensional analytical or numerical model. The user describes the system hot and cold boundary geometry and the operating environment. Basic outputs such as heat load and temperature profiles are determined. The user can select from a built-in insulation material database or input user defined materials. Existing information has been combined with the new experimental thermal conductivity data produced by the Cryogenics Test Laboratory for cryogenic and vacuum environments, including high vacuum, soft vacuum, and no vacuum. Materials in the design tool include multilayer insulation, aerogel blankets, aerogel bulk-fill, foams, powders, composites, and other insulation system constructions. A comparison of the design tool to a specific composite thermal insulation system is given.

  12. Insulating Structural Ceramics Program, Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Andrews, Mark J.; Tandon, Raj; Ott, Eric; Hind, Abi Akar; Long, Mike; Jensen, Robert; Wheat, Leonard; Cusac, Dave; Lin, H. T.; Wereszczak, Andrew A.; Ferber, Mattison K.; Lee, Sun Kun; Yoon, Hyung K.; Moreti, James; Park, Paul; Rockwood, Jill; Boyer, Carrie; Ragle, Christie; Balmer-Millar, Marilou; Aardahl, Chris; Habeger, Craig; Rappe, Ken; Tran, Diana; Koshkarian, Kent; Readey, Michael

    2005-11-22

    New materials and corresponding manufacturing processes are likely candidates for diesel engine components as society and customers demand lower emission engines without sacrificing power and fuel efficiency. Strategies for improving thermal efficiency directly compete with methodologies for reducing emissions, and so the technical challenge becomes an optimization of controlling parameters to achieve both goals. Approaches being considered to increase overall thermal efficiency are to insulate certain diesel engine components in the combustion chamber, thereby increasing the brake mean effective pressure ratings (BMEP). Achieving higher BMEP rating by insulating the combustion chamber, in turn, requires advances in material technologies for engine components such as pistons, port liners, valves, and cylinder heads. A series of characterization tests were performed to establish the material properties of ceramic powder. Mechanical chacterizations were also obtained from the selected materials as a function of temperature utilizing ASTM standards: fast fracture strength, fatique resistance, corrosion resistance, thermal shock, and fracture toughness. All ceramic materials examined showed excellent wear properties and resistance to the corrosive diesel engine environments. The study concluded that the ceramics examined did not meet all of the cylinder head insert structural design requirements. Therefore we do not recommend at this time their use for this application. The potential for increased stresses and temperatures in the hot section of the diesel engine combined with the highly corrosive combustion products and residues has driven the need for expanded materials capability for hot section engine components. Corrosion and strength requirements necessitate the examination of more advanced high temperture alloys. Alloy developments and the understanding of processing, structure, and properties of supperalloy materials have been driven, in large part, by the gas

  13. Functional Hybrid Nano-Oxides

    Science.gov (United States)

    2015-10-26

    ABSTRACT This project was dedicated to investigate and engineer novel properties of oxide based materials , nanostructures and devices with properties that...mechanism for the metal-insulator transition and it also opens up the possibility for the preparation of unique nanostructured materials . A second major...spare time since the funding ended before. Development of novel synthesis and characterization methods in area of Nano-Oxides paved the way to

  14. An Insulating Glass Knowledge Base

    Energy Technology Data Exchange (ETDEWEB)

    Michael L. Doll; Gerald Hendrickson; Gerard Lagos; Russell Pylkki; Chris Christensen; Charlie Cureija

    2005-08-01

    This report will discuss issues relevant to Insulating Glass (IG) durability performance by presenting the observations and developed conclusions in a logical sequential format. This concluding effort discusses Phase II activities and focuses on beginning to quantifying IG durability issues while continuing the approach presented in the Phase I activities (Appendix 1) which discuss a qualitative assessment of durability issues. Phase II developed a focus around two specific IG design classes previously presented in Phase I of this project. The typical box spacer and thermoplastic spacer design including their Failure Modes and Effect Analysis (FMEA) and Fault Tree diagrams were chosen to address two currently used IG design options with varying components and failure modes. The system failures occur due to failures of components or their interfaces. Efforts to begin quantifying the durability issues focused on the development and delivery of an included computer based IG durability simulation program. The focus/effort to deliver the foundation for a comprehensive IG durability simulation tool is necessary to address advancements needed to meet current and future building envelope energy performance goals. This need is based upon the current lack of IG field failure data and the lengthy field observation time necessary for this data collection. Ultimately, the simulation program is intended to be used by designers throughout the current and future industry supply chain. Its use is intended to advance IG durability as expectations grow around energy conservation and with the growth of embedded technologies as required to meet energy needs. In addition the tool has the immediate benefit of providing insight for research and improvement prioritization. Included in the simulation model presentation are elements and/or methods to address IG materials, design, process, quality, induced stress (environmental and other factors), validation, etc. In addition, acquired data

  15. Overhauser effects in insulating solids

    Science.gov (United States)

    Can, T. V.; Caporini, M. A.; Mentink-Vigier, F.; Corzilius, B.; Walish, J. J.; Rosay, M.; Maas, W. E.; Baldus, M.; Vega, S.; Swager, T. M.; Griffin, R. G.

    2014-08-01

    We report magic angle spinning, dynamic nuclear polarization (DNP) experiments at magnetic fields of 9.4 T, 14.1 T, and 18.8 T using the narrow line polarizing agents 1,3-bisdiphenylene-2-phenylallyl (BDPA) dispersed in polystyrene, and sulfonated-BDPA (SA-BDPA) and trityl OX063 in glassy glycerol/water matrices. The 1H DNP enhancement field profiles of the BDPA radicals exhibit a significant DNP Overhauser effect (OE) as well as a solid effect (SE) despite the fact that these samples are insulating solids. In contrast, trityl exhibits only a SE enhancement. Data suggest that the appearance of the OE is due to rather strong electron-nuclear hyperfine couplings present in BDPA and SA-BDPA, which are absent in trityl and perdeuterated BDPA (d21-BDPA). In addition, and in contrast to other DNP mechanisms such as the solid effect or cross effect, the experimental data suggest that the OE in non-conducting solids scales favorably with magnetic field, increasing in magnitude in going from 5 T, to 9.4 T, to 14.1 T, and to 18.8 T. Simulations using a model two spin system consisting of an electron hyperfine coupled to a 1H reproduce the essential features of the field profiles and indicate that the OE in these samples originates from the zero and double quantum cross relaxation induced by fluctuating hyperfine interactions between the intramolecular delocalized unpaired electrons and their neighboring nuclei, and that the size of these hyperfine couplings is crucial to the magnitude of the enhancements. Microwave power dependent studies show that the OE saturates at considerably lower power levels than the solid effect in the same samples. Our results provide new insights into the mechanism of the Overhauser effect, and also provide a new approach to perform DNP experiments in chemical, biophysical, and physical systems at high magnetic fields.

  16. Overhauser effects in insulating solids

    Energy Technology Data Exchange (ETDEWEB)

    Can, T. V.; Corzilius, B.; Walish, J. J.; Griffin, R. G. [Francis Bitter Magnet Laboratory, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 (United States); Department of Chemistry, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 (United States); Caporini, M. A.; Rosay, M.; Maas, W. E. [Bruker BioSpin, Billerica, Massachusetts 01821 (United States); Mentink-Vigier, F.; Vega, S. [Weizmann Institute of Science, Rehovot (Israel); Baldus, M. [NMR Spectroscopy, Bijvoet Center for Biomolecular Research, Department of Chemistry, Faculty of Science, Utrecht University, 3584 CH Utrecht (Netherlands); Swager, T. M. [Department of Chemistry, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 (United States)

    2014-08-14

    We report magic angle spinning, dynamic nuclear polarization (DNP) experiments at magnetic fields of 9.4 T, 14.1 T, and 18.8 T using the narrow line polarizing agents 1,3-bisdiphenylene-2-phenylallyl (BDPA) dispersed in polystyrene, and sulfonated-BDPA (SA-BDPA) and trityl OX063 in glassy glycerol/water matrices. The {sup 1}H DNP enhancement field profiles of the BDPA radicals exhibit a significant DNP Overhauser effect (OE) as well as a solid effect (SE) despite the fact that these samples are insulating solids. In contrast, trityl exhibits only a SE enhancement. Data suggest that the appearance of the OE is due to rather strong electron-nuclear hyperfine couplings present in BDPA and SA-BDPA, which are absent in trityl and perdeuterated BDPA (d{sub 21}-BDPA). In addition, and in contrast to other DNP mechanisms such as the solid effect or cross effect, the experimental data suggest that the OE in non-conducting solids scales favorably with magnetic field, increasing in magnitude in going from 5 T, to 9.4 T, to 14.1 T, and to 18.8 T. Simulations using a model two spin system consisting of an electron hyperfine coupled to a {sup 1}H reproduce the essential features of the field profiles and indicate that the OE in these samples originates from the zero and double quantum cross relaxation induced by fluctuating hyperfine interactions between the intramolecular delocalized unpaired electrons and their neighboring nuclei, and that the size of these hyperfine couplings is crucial to the magnitude of the enhancements. Microwave power dependent studies show that the OE saturates at considerably lower power levels than the solid effect in the same samples. Our results provide new insights into the mechanism of the Overhauser effect, and also provide a new approach to perform DNP experiments in chemical, biophysical, and physical systems at high magnetic fields.

  17. INVESTIGATION OF LOSSES IN INSULATION OF HIGH-VOLTAGE CABLES WITH XLPE INSULATION

    Directory of Open Access Journals (Sweden)

    L.A. Shchebeniuk

    2016-09-01

    Full Text Available In this paper the authors calculate the losses in insulation system cable with XLPE-polyethylene as a solid dielectric insulation and with semiconductor polyethylene used as a conductor screen and a insulation screen. The paper is devoted to the investigation of losses in the insulation system of high- voltage XLPE-cables. The line of XLPE-cables in group running horizontally, provided that the cables are of equal diameter and emit equal losses. It is limited to the following: the air flow around the cables may be necessary restricted by proximity to next cables. The dielectric losses are voltage depended and related to the insulation system materials being used. All current in this insulation system are complex quantities containing both real (Re(I and imaginary (Im(I parts. Values of the loss factor of the insulation system at power frequency tgd are given astgd = Re(I/Im(I. It was proposed the quantities criterion of the loss factor of the insulation system to high voltage XLPE-cables. The work is devoted to creation of a method for calculation of the current rating of high-voltage cables in conditions function.

  18. Model of coherent transport in metal-insulator-midband gap semiconductor-insulator-semiconductor structure

    Science.gov (United States)

    Abramov, I. I.; Danilyuk, A. L.

    1997-08-01

    A kinetic model of coherent transport with self-organized carrier transfer via midband gap semiconductor states in metal-insulator-midband gap semiconductor-insulator-semiconductor structure at room temperature is proposed. The coherent transport at room temperature can be a result of continuous oscillations of charge carriers at midband gap semiconductor states.

  19. Insulation systems of the building construtions

    Directory of Open Access Journals (Sweden)

    Rumiantcev Boris

    2016-01-01

    Full Text Available Constructions of the exterior insulation and decoration combines materials of different functionality and constructive solutions allows to these materials to demonstrate their efficiency to the great extent. Fire safety of buildings is mandatory requirement for building systems. Some insulating material may belong to the group of combustible, but their use in structures so as to minimize the risk of fire. On the other hand, there are special designs, in which non-flammable insulation acts as a flame retardant barrier. In the article carried systematization of construction systems used in the flat and pitched roof during the insulation and wall covering and facades. Taking into account the experience of leading firms were considered the application features of using exterior finish systems: construction solutions, requirements for materials and recommendations about the installation these systems.The article deals with the construction ventilated roofing system of two types: flat roof and pitched roof seam. In the first case, the ventilation system is created using milled insulation boards in the second - by a ventilated gap. In both cases the natural convection of air in the air cavities. Ensuring operational stability insulation is laid on the stages of production of heat-insulating materials. It is important: firstly responsible execution of all process operations associated with providing regulatory properties of materials and secondly, the performance of additional operations associated with the produc-tion of materials, working in a specific design. An example of a material whose properties can modify for a particular application, are milled mineral wool (with air channels for systems of ventilated flat roof.

  20. Magnetic Behavior of a Mott-Insulator YVO3

    Science.gov (United States)

    Kawano, Hazuki; Yoshizawa, Hideki; Ueda, Yutaka

    1994-08-01

    As one of the members of the ABO3-type pseudoperovskite oxide family, Y1-xCaxVO3 exhibits an insulator-metal transition upon a change in the dopant calcium ion concentration x. We have reinvestigated the magnetic structure of the parent compound YVO3 with use of the neutron scattering technique. YVO3 orders at T N1=118 K with the so-called C-type antiferromagnetic structure, but changes to the G-type antiferromagnetic structure at T N2˜77 K through a first order transition with lattice distortion. These spin structures differ from those of an early study by Zubkov et al. (Sov. Phys.-JETP 39 (1974) 896). The static moment which contributes to the magnetic long range order is extrapolated to be less than 1.6 µ B at T=0 K. This value of the static moment is more than 20% smaller than 2.0 µ B expected for a localized spin system with S=1, indicating the existence of spin fluctuations in a Mott insulator YVO3.

  1. Dynamic strain in metallic vs insulating manganite films

    Energy Technology Data Exchange (ETDEWEB)

    Dekker, Martina Cornelia; Oswald, Steffen; Schultz, Ludwig; Doerr, Kathrin [IFW Dresden (Germany)

    2008-07-01

    The use of a ferro- and piezoelectric substrate, PMN-PT(001) (PbMg{sub 1/3}Nb{sub 2/3}O{sub 3}){sub 0.72}(PbTiO{sub 3}){sub 0.28}, allows us to biaxially compress as grown epitaxial films by as much as 0.2%. This reversible dynamic strain process gives a unique insight into the effect of strain on perovskite oxides, eliminating effects such as varying oxygen concentration, which may occur when several substrates with different lattice mismatch are used. We have prepared PLCMO (Pr{sub 1-x}La{sub x}){sub 0.7}Ca{sub 0.3}MnO{sub 3} films on PMN-PT substrates for a range of x values. Around x=0.6, the system exhibits a transition from an insulating to a metallic ground state. We have recorded changes in magnetic moment and transition temperature upon varying x, and compared the effects of dynamic strain on transport behaviour in the metallic and insulating ground states.

  2. Investigation on Photoelectric Behavior of Metal-Insulator-Semiconductor Structure Based on Titania Nanotubes Arrays

    Science.gov (United States)

    Wang, Lili; Panaitescu, Eugen; Richter, Christiaan; Menon, Latika

    2014-03-01

    Titanium dioxide (TiO2) has attracted great interest as an inexpensive, earth-abundant and environment-friendly anode material for next generation photovoltaic devices and the metal-insulator-semiconductor (MIS) concept is one of the most promising approaches for improving solar cell cost effectiveness (in /W). We investigated hybrid MIS structures of semiconducting ordered titania nanotube arrays integrated with insulating iron oxide or copper oxide layers and metallic copper. The morphological and structural properties of the samples were analyzed by scanning and transmission electron microscopy, energy-dispersive X-ray spectroscopy with elemental mapping, and X-ray diffraction. The nanotubular morphology represents a step change from the current thin film approach, providing significantly larger surface area while facilitating the charge separation and electron transport. Photoelectric behavior of the new structures was estimated by transient response, quantum efficiency and spectral response, and a solar simulator was used for recording the photovoltaic response.

  3. Insulator-protected mechanically controlled break junctions for measuring single-molecule conductance in aqueous environments

    Science.gov (United States)

    Muthusubramanian, N.; Galan, E.; Maity, C.; Eelkema, R.; Grozema, F. C.; van der Zant, H. S. J.

    2016-07-01

    We present a method to fabricate insulated gold mechanically controlled break junctions (MCBJ) by coating the metal with a thin layer of aluminum oxide using plasma enhanced atomic layer deposition. The Al2O3 thickness deposited on the MCBJ devices was varied from 2 to 15 nm to test the suppression of leakage currents in deionized water and phosphate buffered saline. Junctions coated with a 15 nm thick oxide layer yielded atomically sharp electrodes and negligible conductance counts in the range of 1 to 10-4 G0 (1 G0 = 77 μS), where single-molecule conductances are commonly observed. The insulated devices were used to measure the conductance of an amphiphilic oligophenylene ethynylene derivative in deionized water.

  4. Optimization of Korean crop storage insulation systems

    Energy Technology Data Exchange (ETDEWEB)

    Jongho Yoon [Taejon National Univ. of Technology, Dept. of Architectural Engineering, Taejon (Korea); Euyjoon Lee [Korea Inst. of Energy Research, Passive Solar Research Team, Taejon (Korea); Krarti, Moncef [Colorado Univ., CEAE Dept., Boulder, CO (United States)

    2003-05-01

    With the increasing concerns with the quality and the safety of foods, several standards and guidelines have been developed to improve the design, construction and operation of storage warehouses. Several cool storage buildings have been constructed in Korea during the last decade. However, there are no specific standards or guidelines for energy use reduction in refrigerated structures. The main objective of this study is to determine the impact of various insulation systems on the total cooling load of the cool storage structures with particular consideration given to the product thermal mass to find optimal insulation thicknesses for each envelope component for various climatic locations in Korea. An energy analysis model was developed using the DOE-2.1E program. To determine the optimal configuration for the storage building insulation system, life cycle cost analysis was conducted. The selection of optimal insulation configuration for each climatic location is based on various criteria including cost and energy minimization. The results presented in this paper provide easy to use design guidelines to select the optimal insulation thickness for crop storage facilities in Korea. (Author)

  5. Metal-Insulator Transitions in Epitaxial LaVO(3) and LaTiO(3) Films

    Science.gov (United States)

    2012-08-01

    semiconductors C. He, T. Sanders, M. Gray, F. Wong, V. Mehta, Y. Suzuki University of Iowa @ Iowa City Office of Sponsored Programs The University of Iowa...are insulating in the bulk—has led to an explosion of research activity in perovskite transition-metal oxide heterostructures. The most well-known

  6. PD-pulse characteristics in rotating machine insulation

    DEFF Research Database (Denmark)

    Holbøll, Joachim; Henriksen, Mogens; Jensen, A;

    1994-01-01

    In this paper results are presented from investigations on partial discharges (PD) in insulation systems, resembling the stator insulation in high voltage rotating machines. A model, simulating a stator winding in a slot, has been developed, consisting of simple rotating machine insulation test...... bars with epoxy/mica insulation, mounted between steel sheets forming a dot, in order to investigate the fundamental behaviour of PD in insulation defects in epoxy/mica insulation and the characteristics of the resulting electrical pulses. Stator slot couplers (SSC) were used to detect pulses coming...

  7. Service Life Estimation Technique of Oxidized XLPE Cables

    Science.gov (United States)

    Hatanaka, Masaki; Nakade, Masahiko; Hirose, Takafumi; Sugimoto, Syuu; Namiki, Yukihiko

    XLPE which is the insulator of the XLPE cable will be oxidized by heat. But, an accident caused by oxidized XLPE has hardly reported until now. Therefore, oxidization of XLPE hasn’t been regard as important. But recently we found that XLPE cable used for a long time could break down due to the oxidization of XLPE by simulation result. So, we developed the service life estimation technique of oxidized XLPE cables used FT-IR.

  8. Deposition and characterization of amorphous aluminum nitride thin films for a gate insulator

    Energy Technology Data Exchange (ETDEWEB)

    Oikawa, H.; Akiyama, R. [Institute of Materials Science, University of Tsukuba,1-1-1 Tennoudai, Tsukuba, 305-8573 (Japan); Tsukuba Nano-Tech Human Resource Development Program, Graduate School of Pure and Applied Sciences, University of Tsukuba, 1-1-1 Tennoudai, Tsukuba, 305-8571 (Japan); Kanazawa, K. [Institute of Materials Science, University of Tsukuba,1-1-1 Tennoudai, Tsukuba, 305-8573 (Japan); Kuroda, S., E-mail: kuroda@ims.tsukuba.ac.jp [Institute of Materials Science, University of Tsukuba,1-1-1 Tennoudai, Tsukuba, 305-8573 (Japan); Tsukuba Nano-Tech Human Resource Development Program, Graduate School of Pure and Applied Sciences, University of Tsukuba, 1-1-1 Tennoudai, Tsukuba, 305-8571 (Japan); Harayama, I. [Institute of Applied Physics, University of Tsukuba, 1-1-1 Tennoudai, Tsukuba, 305-8573 (Japan); Tsukuba Nano-Tech Human Resource Development Program, Graduate School of Pure and Applied Sciences, University of Tsukuba, 1-1-1 Tennoudai, Tsukuba, 305-8571 (Japan); Nagashima, K. [Institute of Applied Physics, University of Tsukuba, 1-1-1 Tennoudai, Tsukuba, 305-8573 (Japan); Sekiba, D. [Institute of Applied Physics, University of Tsukuba, 1-1-1 Tennoudai, Tsukuba, 305-8573 (Japan); Tandem Accelerator Complex, Research Facility Center for Science and Technology, University of Tsukuba, 1-1-1 Tennoudai, Tsukuba, 305-8577 (Japan); Ashizawa, Y.; Tsukamoto, A.; Nakagawa, K. [College of Science and Technology, Nihon University, 7-24-1 Narashinodai, Funabashi, 274-8501 (Japan); Ota, N. [Tsukuba Nano-Tech Human Resource Development Program, Graduate School of Pure and Applied Sciences, University of Tsukuba, 1-1-1 Tennoudai, Tsukuba, 305-8571 (Japan)

    2015-01-01

    Thin films of aluminum nitride (AlN) fabricated by reactive deposition were characterized in order to examine the electrical insulation properties suitable for a gate insulator. For a series of AlN films deposited with a variation of the amount of Al flux at a fixed N flux, compositional and chemical analyses were performed using X-ray photoelectron spectroscopy (XPS) and elastic recoil detection analysis (ERDA). Combined with the result of current-voltage (I-V) measurement, it is found that the insulation properties are correlated with the compositional ratio between Al and N estimated by the ERDA measurement; a good electrical insulation with a minimal leak current of the order of 10{sup -9} A/cm{sup 2} at a high electric field 1 MV/cm is achieved in the film of nearly stoichiometric compositional ratio of Al/N, in which the dominance of the Al-N bonding state is confirmed in the XPS measurement. On the other hand, the incorporation of oxygen, probably caused by the surface oxidization due to the exposure to the air, has little effect on the electrical properties. - Highlights: • AlN thin films deposited by reactive deposition were characterized for gate insulator. • A good electrical insulation was achieved at nearly stoichiometric composition. • The effects of oxygen incorporation and Al-N bonding state were also investigated. • A minimum leak current density as low as 10{sup -9}A/cm{sup 2} at 1MV/cm was achieved.

  9. Analysis of the XLPE Insulation of Distribution Covered Conductors in Brazil

    Science.gov (United States)

    Nóbrega, A. M.; Martinez, M. L. B.; de Queiroz, Alvaro Antonio Alencar

    2014-03-01

    Cross-linked polyethylene (XLPE) has been the most common insulation applied to medium voltage covered conductors (MVCCs) in Brazil. The results of accelerated aging tests carried out at high voltage laboratory of UNIFEI (LAT-EFEI), combining the stresses of heat and voltage to ground aiming at enhancing surface corona activity assays, have identified the early failures in XLPE insulations of the Brazilian MVCCs. The observed failures indicate that complementary studies should be performed to better understand the degradation mechanisms of the MVCCs insulations manufactured in Brazil. In this paper, x-ray photoelectron spectroscopy (XPS), contact angle analysis (CA), photoacoustic spectroscopy (PAS), x-ray diffraction (XRD), and atomic force microscopy (AFM) measurements on samples of five Brazilian national/regional MVCCs are reported. XPS, CA, and PAS analysis indicated that a large variety of oxygen-containing groups associated to the oxidation of the XLPE insulations appear to be related to the manufacturing conditions. AFM analysis indicated that the average surface roughness and topography of the XLPE insulation changed significantly and depend on the selected manufacturer. XRD analysis indicates a strong heterogeneity of crystals nucleation that results into different degrees of crystallinity of the Brazilian MVCCs cables. The results of this work indicate strong evidences of manufacturing defects in the XLPE insulation of Brazilian's MVCCs. The origin of these defects seems to be inherent to the technology used by manufacturers to the production of the MVCCs. The production-related defects are not detectable by the standard tests as partial discharges or even the standard routine—acceptance power frequency assays routinely used in dielectric compatibility tests at high voltage laboratories.

  10. Semiconductor structures having electrically insulating and conducting portions formed from an AlSb-alloy layer

    Science.gov (United States)

    Spahn, Olga B.; Lear, Kevin L.

    1998-01-01

    A semiconductor structure. The semiconductor structure comprises a plurality of semiconductor layers formed on a substrate including at least one layer of a III-V compound semiconductor alloy comprising aluminum (Al) and antimony (Sb), with at least a part of the AlSb-alloy layer being chemically converted by an oxidation process to form superposed electrically insulating and electrically conducting portions. The electrically insulating portion formed from the AlSb-alloy layer comprises an oxide of aluminum (e.g. Al.sub.2 O.sub.3), while the electrically conducting portion comprises Sb. A lateral oxidation process allows formation of the superposed insulating and conducting portions below monocrystalline semiconductor layers for forming many different types of semiconductor structures having particular utility for optoelectronic devices such as light-emitting diodes, edge-emitting lasers, vertical-cavity surface-emitting lasers, photodetectors and optical modulators (waveguide and surface normal), and for electronic devices such as heterojunction bipolar transistors, field-effect transistors and quantum-effect devices. The invention is expected to be particularly useful for forming light-emitting devices for use in the 1.3-1.6 .mu.m wavelength range, with the AlSb-alloy layer acting to define an active region of the device and to effectively channel an electrical current therein for efficient light generation.

  11. Quantitative analysis of thermal insulation coatings

    DEFF Research Database (Denmark)

    Kiil, Søren

    2014-01-01

    This work concerns the development of simulation tools for mapping of insulation properties of thermal insulation coatings based on selected functional filler materials. A mathematical model, which includes the underlying physics (i.e. thermal conductivity of a heterogeneous two-component coating...... and porosity and thermal conductivity of selected fillers) was recently developed. The model has been validated against data from a previous experimental investigation with hollow glass sphere-based epoxy and acrylic coatings. In this presentation, a concise introduction to the model and some of the simulation...... results are provided. A practical case story with an insulation coating applied to a hot water pipe is included. Further development of the simulation tool to other types of fillers will be shortly discussed....

  12. Switchable Metal-Insulator Phase Transition Metamaterials.

    Science.gov (United States)

    Hajisalem, Ghazal; Nezami, Mohammadreza S; Gordon, Reuven

    2017-05-10

    We investigate the switching of a gap plasmon tunnel junction between conducting and insulating states. Hysteresis is observed in the second and the third harmonic generation power dependence, which arises by thermally induced disorder ("melting") of a two-carbon self-assembled monolayer between an ultraflat gold surface and metal nanoparticles. The hysteresis is observed for a variety of nanoparticle sizes, but not for larger tunnel junctions where there is no appreciable tunneling. By combining quantum corrected finite-difference time-domain simulations with nonlinear scattering theory, we calculate the changes in the harmonic generation between the tunneling and the insulating states, and good agreement is found with the experiments. This paves the way to a new class of metal-insulator phase transition switchable metamaterials, which may provide next-generation information processing technologies.

  13. Study on Insulating Material by Renewable Resources

    Science.gov (United States)

    Kurata, Yasuyuki; Kurosumi, Akihiro; Ishikawa, Keita

    Under circumstances such as global warming caused by carbon dioxide and other green house gas and crisis of depletion of fossil resources, recyclable resources such as biomass have captured the world's attention as reproducible resources alternative to petroleum. Therefore the technologies such to manufacture chemicals from recyclable resources have been developed for the achievement of measures for controlling global warming and the low carbon society. Recently, the bioplastic such as polylactic resin is applied to the home appliances and the automobile interior part as substitution of general-purpose plastic Moreover, the insulation oil from the vegetable oil has been put to practical use. The application of recyclable resources is extending in an electric field. In this paper, we introduce the characteristic and the problem of the insulating material made from recyclable resources in the field of the solid insulation.

  14. Insulating Foams Save Money, Increase Safety

    Science.gov (United States)

    2009-01-01

    Scientists at Langley Research Center created polyimide foam insulation for reusable cryogenic propellant tanks on the space shuttle. Meanwhile, a small Hialeah, Florida-based business, PolyuMAC Inc., was looking for advanced foams to use in the customized manufacturing of acoustical and thermal insulation. The company contacted NASA, licensed the material, and then the original inventors worked with the company's engineers to make a new material that was better for both parties. The new version, a high performance, flame retardant, flexible polyimide foam, is used for insulating NASA cryogenic propellant tanks and shows promise for use on watercraft, aircraft, spacecraft, electronics and electrical products, automobiles and automotive products, recreation equipment, and building and construction materials.

  15. Topological Insulator Realized with Piezoelectric Resonators

    Science.gov (United States)

    McHugh, S.

    2016-07-01

    We propose a realization of a two-dimensional topological insulator using an array of microwave piezoelectric resonators. The resonators are coupled electrically, but acoustically isolated. The inter-resonator electromagnetic coupling required to reproduce an effective mechanical topological insulator is found explicitly. Both the acoustic and electric response show the essential features of topological insulator, e.g., helical edge states. The helical edge states may be useful for engineering nonreciprocal electronic devices like isolators and circulators. These components do not often appear in the radios of modern mobile phones since they traditionally require bulky magnetic material. However, a nonreciprocal device based on piezoelectric resonators may meet the demands of phone manufacturers due to their small size, high-linearity, and ease of fabrication.

  16. Electrically insulated MLI and thermal anchor

    Science.gov (United States)

    Kamiya, Koji; Furukawa, Masato; Hatakenaka, Ryuta; Miyakita, Takeshi; Murakami, Haruyuki; Kizu, Kaname; Tsuchiya, Katsuhiko; Koidea, Yoshihiko; Yoshida, Kiyoshi

    2014-01-01

    The thermal shield of JT-60SA is kept at 80 K and will use the multilayer insulation (MLI) to reduce radiation heat load to the superconducting coils at 4.4 K from the cryostat at 300 K. Due to plasma pulse operation, the MLI is affected by eddy current in toroidal direction. The MLI is designed to suppress the current by electrically insulating every 20 degree in the toroidal direction by covering the MLI with polyimide films. In this paper, two kinds of designs for the MLI system are proposed, focusing on a way to overlap the layers. A boil-off calorimeter method and temperature measurement has been performed to determine the thermal performance of the MLI system. The design of the electrical insulated thermal anchor between the toroidal field (TF) coil and the thermal shield is also explained.

  17. Acoustic quality and sound insulation between dwellings

    DEFF Research Database (Denmark)

    Rindel, Jens Holger

    1999-01-01

    to another, however, several of the results show a slope around 4 % per dB. The results may be used to evaluate the acoustic quality level of a certain set of sound insulation requirements, or they may be used as a basis for specifying the desired acoustic quality of future buildings.......During the years there have been several large field investigations in different countries with the aim to find a relationship between sound insulation between dwellings and the subjective degree of annoyance. This paper presents an overview of the results, and the dif-ficulties in comparing...... the different findings are discussed. It is tried to establish dose-response relationships between airborne sound insulation or impact sound pressure level according to ISO 717 and the percentage of people being annoyed by noise from neighbours. The slopes of the dose-response curves vary from one investigation...

  18. Acoustic quality and sound insulation between dwellings

    DEFF Research Database (Denmark)

    Rindel, Jens Holger

    1998-01-01

    to another, however, several of the results show a slope around 4 % per dB. The results may be used to evaluate the acoustic quality level of a certain set of sound insulation requirements, or they may be used as a basis for specifying the desired acoustic quality of future buildings......During the years there have been several large field investigations in different countries with the aim to find a relationship between sound insulation between dwellings and the subjective degree of annoyance. This paper presents an overview of the results, and the difficulties in comparing...... the different findings are discussed. It is tried to establish dose-response relationships between airborne sound insulation or impact sound pressure level according to ISO 717 and the percentage of people being annoyed by noise from neighbours. The slopes of the dose-response curves vary from one investigation...

  19. Dynamical Gap Generation in Topological Insulators

    CERN Document Server

    Cea, Paolo

    2016-01-01

    We developed a quantum field theoretical description for the surface states of three-dimensional topological insulators. Within the relativistic quantum field theory formulation, we investigated the dynamics of low-lying surface states in an applied transverse magnetic field. We argued that, by taking into account quantum fluctuations, in three-dimensional topological insulators there is dynamical generation of a gap by a rearrangement of the Dirac sea. By comparing with available experimental data we found that our theoretical results allowed a consistent and coherent description of the Landau level spectrum of the surface low-lying excitations. Finally, we showed that the recently detected zero-Hall plateau at the charge neutral point could be accounted for by chiral edge states residing at the magnetic domain boundaries between the top and bottom surfaces of the three-dimensional topological insulator.

  20. Insulation Test Cryostat with Lift Mechanism

    Science.gov (United States)

    Fesmire, James E. (Inventor); Dokos, Adam G. (Inventor)

    2016-01-01

    A multi-purpose, cylindrical thermal insulation test apparatus is used for testing insulation materials and systems of materials using a liquid boil-off calorimeter system for absolute measurement of the effective thermal conductivity (k-value) and heat flux of a specimen material at a fixed environmental condition (cold-side temperature, warm-side temperature, vacuum pressure level, and residual gas composition). An inner vessel receives liquid with a normal boiling point below ambient temperature, such as liquid nitrogen, enclosed within a vacuum chamber. A cold mass assembly, including upper and lower guard chambers and middle test vessel, is suspended from a lid of the vacuum canister. Each of the three chambers is filled and vented through a single feedthrough. All fluid and instrumentation feedthroughs are mounted and suspended from a top domed lid allowing easy removal of the cold mass. A lift mechanism allows manipulation of the cold mass assembly and insulation test article.

  1. The winding road to topological insulators

    Science.gov (United States)

    Mele, Eugene J.

    2015-12-01

    This note gives a brief discussion of the discovery of topological insulators from a consideration of the low energy properties of single layer graphene. Topological band theoretic classification of insulating states in two and three-dimensions and experimental realizations are briefly discussed. Note to readers: This is a short summary of a talk that was given at the Nobel Symposium ‘New Forms of Matter: Topological Insulators and Superconductors’ held in Stockholm in June 2014. The talk was in the spirit of an overview talk but focusing on the background and early history of the field rather than reviewing the substantial (and growing) technical literature on the subject. Readers interested in technical details will surely be disappointed and should read no further, but others may be interested in some of the developments recounted here.

  2. Structure Change of the Insulating Composite

    Directory of Open Access Journals (Sweden)

    Vaclav Mentlik

    2008-01-01

    Full Text Available Modern power electric drives brought advantages in induction motor control. In the same time appeared problems with high frequency square waveform voltage (pulse stress produced by the voltage converters. Voltage converters produce repetitive pulses with high level of voltage rise fronts (slew rates. Rise fronts attained values of up to tens kilovolts per microsecond and voltage pulse repetition frequency up to some tens of kilohertz. This technology is an advantage for a drive control. Significant is the impact of these voltage waveforms on the motor insulations. Degradation of the main wall insulation can reduce the reliability of the electric motor and whole drive. In this paper is discussed one possible solution. The promising modification in the insulation material structure is presented in the paper.

  3. Quantum magnetotransport properties of Floquet topological insulators

    Science.gov (United States)

    Tahir, M.

    2017-07-01

    A theoretical realization of the quantum magnetotransport properties for the surface states of ultrathin Floquet topological insulators (FTIs) is presented. Their band structure in the presence of an external perpendicular magnetic field is derived and discussed. Further, the longitudinal and Hall conductivities are evaluated using linear response theory. A new quantum Hall state of matter has been found in FTIs under the application of a magnetic field where the n=0 Landau level undergoes a quantum phase transition from a trivial insulator state to a Hall insulator state. In the former state the Hall conductivity is zero at zero Fermi energy (EF=0) while in the latter the Hall conductivity is equal to e2 / h . The proposed effects are accessible to experiments which open new possibilities to study FTIs for the realization of (i) non trivial quantum phase transitions, (ii) exchange of surface states, and (iii) unusual quantum Hall plateaus.

  4. Optimisation of Multilayer Insulation an Engineering Approach

    CERN Document Server

    Chorowski, M; Parente, C; Riddone, G

    2001-01-01

    A mathematical model has been developed to describe the heat flux through multilayer insulation (MLI). The total heat flux between the layers is the result of three distinct heat transfer modes: radiation, residual gas conduction and solid spacer conduction. The model describes the MLI behaviour considering a layer-to-layer approach and is based on an electrical analogy, in which the three heat transfer modes are treated as parallel thermal impedances. The values of each of the transfer mode vary from layer to layer, although the total heat flux remains constant across the whole MLI blanket. The model enables the optimisation of the insulation with regard to different MLI parameters, such as residual gas pressure, number of layers and boundary temperatures. The model has been tested with experimental measurements carried out at CERN and the results revealed to be in a good agreement, especially for insulation vacuum between 10-5 Pa and 10-3 Pa.

  5. Detection of UV Pulse from Insulators and Application in Estimating the Conditions of Insulators

    Science.gov (United States)

    Wang, Jingang; Chong, Junlong; Yang, Jie

    2014-10-01

    Solar radiation in the band of 240-280 nm is absorbed by the ozone layer in the atmosphere, and corona discharges from high-voltage apparatus emit in air mainly in the 230-405 nm range of ultraviolet (UV), so the band of 240-280 nm is called UV Solar Blind Band. When the insulators in a string deteriorate or are contaminated, the voltage distribution along the string will change, which causes the electric fields in the vicinity of insulators change and corona discharge intensifies. An UV pulse detection method to check the conditions of insulators is presented based on detecting the UV pulse among the corona discharge, then it can be confirmed that whether there exist faulty insulators and whether the surface contamination of insulators is severe for the safe operation of power systems. An UV-I Insulator Detector has been developed, and both laboratory tests and field tests have been carried out which demonstrates the practical viability of UV-I Insulator Detector for online monitoring.

  6. High Performance Slab-on-Grade Foundation Insulation Retrofits

    Energy Technology Data Exchange (ETDEWEB)

    Goldberg, Louise F. [NorthernSTAR, St. Paul, MN (United States); Mosiman, Garrett E. [NorthernSTAR, St. Paul, MN (United States)

    2015-09-01

    ?A more accurate assessment of SOG foundation insulation energy savings than traditionally possible is now feasible. This has been enabled by advances in whole building energy simulation with 3-dimensional foundation modelling integration at each time step together with an experimental measurement of the site energy savings of SOG foundation insulation. Ten SOG insulation strategies were evaluated on a test building to identify an optimum retrofit insulation strategy in a zone 6 climate (Minneapolis, MN). The optimum insulation strategy in terms of energy savings and cost effectiveness consisted of two components: (a) R-20 XPS insulation above grade, and, (b) R-20 insulation at grade (comprising an outer layer of R-10 insulation and an interior layer of R-12 poured polyurethane insulation) tapering to R-10 XPS insulation at half the below-grade wall height (the lower half of the stem wall was uninsulated). The optimum insulation strategy was applied to single and multi-family residential buildings in climate zone 4 - 7. The highest site energy savings of 5% was realized for a single family home in Duluth, MN, and the lowest savings of 1.4 % for a 4-unit townhouse in Richmond, VA. SOG foundation insulation retrofit simple paybacks ranged from 18 to 47 years. There are other benefits of SOG foundation insulation resulting from the increase in the slab surface temperatures. These include increased occupant thermal comfort, and a decrease in slab surface condensation particularly around the slab perimeter.

  7. Silicon on insulator with active buried regions

    Science.gov (United States)

    McCarthy, A.M.

    1996-01-30

    A method is disclosed for forming patterned buried components, such as collectors, sources and drains, in silicon-on-insulator (SOI) devices. The method is carried out by epitaxially growing a suitable sequence of single or multiple etch stop layers ending with a thin silicon layer on a silicon substrate, masking the silicon such that the desired pattern is exposed, introducing dopant and activating in the thin silicon layer to form doped regions. Then, bonding the silicon layer to an insulator substrate, and removing the silicon substrate. The method additionally involves forming electrical contact regions in the thin silicon layer for the buried collectors. 10 figs.

  8. Cryogenic Vacuum Insulation for Vessels and Piping

    Science.gov (United States)

    Kogan, A.; Fesmire, J.; Johnson, W.; Minnick, J.

    2010-01-01

    Cryogenic vacuum insulation systems, with proper materials selection and execution, can offer the highest levels of thermal performance. Three areas of consideration are vital to achieve the optimum result: materials, representative test conditions, and engineering approach for the particular application. Deficiency in one of these three areas can prevent optimum performance and lead to severe inefficiency. Materials of interest include micro-fiberglass, multilayer insulation, and composite arrangements. Cylindrical liquid nitrogen boil-off calorimetry methods were used. The need for standard thermal conductivity data is addressed through baseline testing. Engineering analysis and design factors such as layer thickness, density, and practicality are also considered.

  9. Insulator Surface Flashover Due to UV Illumination

    Science.gov (United States)

    2009-06-01

    and a CTITM cryopump (CTI Cryogenics/Helix, Model : Cryo Torr 8). The potential across the insulator, i.e. between the electrodes, could be adjusted...determined the energy of the pulse at the insulator. The laser energy is variable by adjusting the voltage of the thyratron output switch (13 kV to 19 kV...The laser was nominally operated with the thyratron output switch set at 18 kV and single pulse mode. Figure 4 shows three typical laser power

  10. Dielectric insulation and high-voltage issues

    CERN Document Server

    Tommasini, D

    2010-01-01

    Electrical faults are in most cases dramatic events for magnets, due to the large stored energy which is potentially available to be dissipated at the fault location. After a reminder of the principles of electrostatics in Section 1, the basic mechanisms of conduction and breakdown in dielectrics are summarized in Section 2. Section 3 introduces the types and function of the electrical insulation in magnets, and Section 4 its relevant failure mechanisms. Section 5 deals with ageing and, finally, Section 6 gives some principles for testing. Though the School specifically dealt with warm magnets, for completeness some principles of dielectric insulation for superconducting accelerator magnets are briefly summarized in a dedicated appendix.

  11. Current correlations in quantum spin Hall insulators.

    Science.gov (United States)

    Schmidt, Thomas L

    2011-08-26

    We consider a four-terminal setup of a two-dimensional topological insulator (quantum spin Hall insulator) with local tunneling between the upper and lower edges. The edge modes are modeled as helical Luttinger liquids and the electron-electron interactions are taken into account exactly. Using perturbation theory in the tunneling, we derive the cumulant generating function for the interedge current. We show that different possible transport channels give rise to different signatures in the current noise and current cross correlations, which could be exploited in experiments to elucidate the interplay between electron-electron interactions and the helical nature of the edge states.

  12. Quantitative analysis of thermal insulation coatings

    DEFF Research Database (Denmark)

    Kiil, Søren

    2014-01-01

    This work concerns the development of simulation tools for mapping of insulation properties of thermal insulation coatings based on selected functional filler materials. A mathematical model, which includes the underlying physics (i.e. thermal conductivity of a heterogeneous two-component coating...... and porosity and thermal conductivity of selected fillers) was recently developed. The model has been validated against data from a previous experimental investigation with hollow glass sphere-based epoxy and acrylic coatings. In this presentation, a concise introduction to the model and some of the simulation...

  13. Plateau-insulator transition in graphene

    Energy Technology Data Exchange (ETDEWEB)

    Amado, M; Diez, E; Caridad, J M [Laboratorio de Bajas Temperaturas, Universidad de Salamanca, E-37008 Salamanca (Spain); Lopez-Romero, D [CT-ISOM, Universidad Politecnica de Madrid, E-28040 Madrid (Spain); Rossella, F; Dionigi, F; Bellani, V [Dipartimento di Fisica ' A Volta' and CNISM, Universita degli studi di Pavia, I-27100 Pavia (Italy); Maude, D K, E-mail: marioam@fis.ucm.e [Laboratoire National des Champs Magnetiques Intenses, F-38042 Grenoble (France)

    2010-05-15

    We investigate the quantum Hall effect (QHE) in a graphene sample with Hall-bar geometry close to the Dirac point at high magnetic fields up to 28 T. We have discovered a plateau-insulator quantum phase transition passing from the last plateau for the integer QHE in graphene to an insulator regime {nu}=-2{yields}{nu}=0. The analysis of the temperature dependence of the longitudinal resistance gives a value for the critical exponent associated with the transition equal to {kappa}=0.58{+-}0.03.

  14. Composite insulators and their aging: An overview

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The aging (biological deterioration) is a major problem of composite insulators now-a-days. The main thing in aging is to predict how, when and with what speed it occurs and under what conditions it can lead to failure and what overall average expected life of a composite insulator is. For this a lot of researches have been done. This review summarizes the methods of artificial field testing (aging), natural testing, standards the developed for aging, techniques of analysis, results achieved until now about various parameters from various locations, handling guidelines and a conclusion on what is further needed.

  15. Topological Insulators in α-Graphyne

    Institute of Scientific and Technical Information of China (English)

    WANG Guo-Xiang; HOU Jing-Min

    2013-01-01

    In this paper,we investigate topological phases of α-graphyne with tight-binding method.By calculating the topological invariant Z2 and the edge states,we identify topological insulators.We present the phase diagrams of α-graphyne with different filling fractions as a function of spin-orbit interaction and the nearest-neighbor hopping energy.We find there exist topological insulators in α-graphyne.We analyze and discuss the characteristics of topological phases of α-graphyne.

  16. Simulated meteoroid penetration of reusable surface insulation

    Science.gov (United States)

    Lehman, J. K.; Christensen, H. E.

    1973-01-01

    Meteoroid impact simulation test results on insulation tiles were used to determine penetration resistance of reusable surface insulation attached to simulated shuttle structures. The probability of no meteoroid damage to a typical shuttle orbiter was determined. Specimens were plasma jet tested to determine effects of various size meteoroid cavities on their thermal performance. None of the tiles failed catastrophically, but large, egg-shaped craters did result from meteoroid penetration. The metallic side of a specimen that was completely penetrated showed a petalled hole typical for thin gage shielded structures.

  17. Silicon dioxide with a silicon interfacial layer as an insulating gate for highly stable indium phosphide metal-insulator-semiconductor field effect transistors

    Science.gov (United States)

    Kapoor, V. J.; Shokrani, M.

    1991-01-01

    A novel gate insulator consisting of silicon dioxide (SiO2) with a thin silicon (Si) interfacial layer has been investigated for high-power microwave indium phosphide (InP) metal-insulator-semiconductor field effect transistors (MISFETs). The role of the silicon interfacial layer on the chemical nature of the SiO2/Si/InP interface was studied by high-resolution X-ray photoelectron spectroscopy. The results indicated that the silicon interfacial layer reacted with the native oxide at the InP surface, thus producing silicon dioxide, while reducing the native oxide which has been shown to be responsible for the instabilities in InP MISFETs. While a 1.2-V hysteresis was present in the capacitance-voltage (C-V) curve of the MIS capacitors with silicon dioxide, less than 0.1 V hysteresis was observed in the C-V curve of the capacitors with the silicon interfacial layer incorporated in the insulator. InP MISFETs fabricated with the silicon dioxide in combination with the silicon interfacial layer exhibited excellent stability with drain current drift of less than 3 percent in 10,000 sec, as compared to 15-18 percent drift in 10,000 sec for devices without the silicon interfacial layer. High-power microwave InP MISFETs with Si/SiO2 gate insulators resulted in an output power density of 1.75 W/mm gate width at 9.7 GHz, with an associated power gain of 2.5 dB and 24 percent power added efficiency.

  18. Building America Top Innovations 2012: Basement Insulation Systems

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-01-01

    This Building America Top Innovations profile describes research on basement insulation, which identifies the wall installation methods and materials that perform best in terms of insulation and water resistance.

  19. Field experience and electrical characteristics of punctured porcelain suspension insulators

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, D.H. [Institut de Recherche d`Hydro-Quebec, Varennes, PQ (Canada)

    1997-12-31

    The condition and electrical characteristics of porcelain insulators in service at Hydro-Quebec were investigated through a series of live-line tests. More than 2,000 insulator strings on the distribution system were checked under energized field conditions using different detection devices. About 200 faulty insulators and representative sound insulators were removed and analyzed in the laboratory in an effort to assess the efficiency of the different devices used to detect the faulty insulators. The detection of faulty insulator units is necessary to maintain system reliability. Insulator deterioration was found to be caused by inherent porosity and manufacturing defects in the porcelain shell and by expansion forces produced by insulator pin-hole cement. 2 refs., 3 figs.

  20. Insulation Materials of Transformer Using Chemical Mechanism of Moisture Absorption

    OpenAIRE

    Hussian Abbasi

    2014-01-01

    The composite insulation system of power transformers consisting of two insulation materials (cellulose and mineral oil) are the main insulation material of power transformer, the increase of moisture will reduce their insulation strength. Moisture equilibrium curves are the basis of power transformer moisture detection, however, the service data and theory analysis both indicate the present curves are not fit for old transformer. Therefore this research work is focused the law and mechanism ...

  1. Recent Progress in Electrical Insulation Techniques for HTS Power Apparatus

    Science.gov (United States)

    Hayakawa, Naoki; Kojima, Hiroki; Hanai, Masahiro; Okubo, Hitoshi

    This paper describes the electrical insulation techniques at cryogenic temperatures, i.e. Cryodielectrics, for HTS power apparatus, e.g. HTS power transmission cables, transformers, fault current limiters and SMES. Breakdown and partial discharge characteristics are discussed for different electrical insulation configurations of LN2, sub-cooled LN2, solid, vacuum and their composite insulation systems. Dynamic and static insulation performances with and without taking account of quench in HTS materials are also introduced.

  2. Estimation of winding insulation resistance to the corona discharges

    Science.gov (United States)

    Leonov, A.; Red'ko, V.; Soldatenko, E.

    2014-10-01

    This article presents test results of enameled winding wires, characterizing an insulation electrical and mechanical strength. Standard and original test methods were used. Note that existing standard test methods do not estimate enamel insulation resistance to the electrical loads under winding operation of variable-speed drive. We show that estimation of wire corona resistance can be done by high frequency electrical impulse testing. Wire insulation plays the main role of reliability of insulation system.

  3. A transparent electrochromic metal-insulator switching device with three-terminal transistor geometry

    Science.gov (United States)

    Katase, Takayoshi; Onozato, Takaki; Hirono, Misako; Mizuno, Taku; Ohta, Hiromichi

    2016-05-01

    Proton and hydroxyl ion play an essential role for tuning functionality of oxides because their electronic state can be controlled by modifying oxygen off-stoichiometry and/or protonation. Tungsten trioxide (WO3), a well-known electrochromic (EC) material for smart window, is a wide bandgap insulator, whereas it becomes a metallic conductor HxWO3 by protonation. Although one can utilize electrochromism together with metal-insulator (MI) switching for one device, such EC-MI switching cannot be utilized in current EC devices because of their two-terminal structure with parallel-plate configuration. Here we demonstrate a transparent EC-MI switchable device with three-terminal TFT-type structure using amorphous (a-) WO3 channel layer, which was fabricated on glass substrate at room temperature. We used water-infiltrated nano-porous glass, CAN (calcium aluminate with nano-pores), as a liquid-leakage-free solid gate insulator. At virgin state, the device was fully transparent in the visible-light region. For positive gate voltage, the active channel became dark blue, and electrical resistivity of the a-WO3 layer drastically decreased with protonation. For negative gate voltage, deprotonation occurred and the active channel returned to transparent insulator. Good cycleability of the present transparent EC-MI switching device would have potential for the development of advanced smart windows.

  4. Metallic Interface Emerging at Magnetic Domain Wall of Antiferromagnetic Insulator: Fate of Extinct Weyl Electrons

    Directory of Open Access Journals (Sweden)

    Youhei Yamaji

    2014-05-01

    Full Text Available Topological insulators, in contrast to ordinary semiconductors, accompany protected metallic surfaces described by Dirac-type fermions. Here, we theoretically show that another emergent two-dimensional metal embedded in the bulk insulator is realized at a magnetic domain wall. The domain wall has long been studied as an ingredient of both old-fashioned and leading-edge spintronics. The domain wall here, as an interface of seemingly trivial antiferromagnetic insulators, emergently realizes a functional interface preserved by zero modes with robust two-dimensional Fermi surfaces, where pyrochlore iridium oxides proposed to host the condensed-matter realization of Weyl fermions offer such examples at low temperatures. The existence of in-gap states that are pinned at domain walls, theoretically resembling spin or charge solitons in polyacetylene, and protected as the edges of hidden one-dimensional weak Chern insulators characterized by a zero-dimensional class-A topological invariant, solves experimental puzzles observed in R_{2}Ir_{2}O_{7} with rare-earth elements R. The domain wall realizes a novel quantum confinement of electrons and embosses a net uniform magnetization that enables magnetic control of electronic interface transports beyond the semiconductor paradigm.

  5. A Solution‐Doped Polymer Semiconductor:Insulator Blend for Thermoelectrics

    Science.gov (United States)

    Kiefer, David; Yu, Liyang; Fransson, Erik; Gómez, Andrés; Primetzhofer, Daniel; Amassian, Aram; Campoy‐Quiles, Mariano

    2016-01-01

    Poly(ethylene oxide) is demonstrated to be a suitable matrix polymer for the solution‐doped conjugated polymer poly(3‐hexylthiophene). The polarity of the insulator combined with carefully chosen processing conditions permits the fabrication of tens of micrometer‐thick films that feature a fine distribution of the F4TCNQ dopant:semiconductor complex. Changes in electrical conductivity from 0.1 to 0.3 S cm−1 and Seebeck coefficient from 100 to 60 μV K−1 upon addition of the insulator correlate with an increase in doping efficiency from 20% to 40% for heavily doped ternary blends. An invariant bulk thermal conductivity of about 0.3 W m−1 K−1 gives rise to a thermoelectric Figure of merit ZT ∼ 10−4 that remains unaltered for an insulator content of more than 60 wt%. Free‐standing, mechanically robust tapes illustrate the versatility of the developed dopant:semiconductor:insulator ternary blends. PMID:28105396

  6. Effects of Dressing Poses on Clothing Thermal Insulation

    Institute of Scientific and Technical Information of China (English)

    李俊; 刘岩; 张渭源

    2004-01-01

    With a thermal manikin, the effects of dressing poses on clothing thermal insulation are studied. It is found that the thermal insulation of still air layer over human body has not been influenced by the dressing poses, but the dressing poses have effects on the thermal insulation of clothing system.

  7. Thermal Insulation Distribution Pattern of Layered Clothing Ensemble

    Institute of Scientific and Technical Information of China (English)

    李俊; 韦鸿发; 刘岩; 张渭源

    2004-01-01

    With a thermal manikin, the distribution pattern of thermal insulation in multi-layered clothing ensemble is studied. It is found that the thermal insulation of multi-layered clothing ensemble has certain statistical relationship with the thermal insulation of each layer, and the prediction equation has been established.

  8. 49 CFR 236.527 - Roadway element insulation resistance.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Roadway element insulation resistance. 236.527 Section 236.527 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD... element insulation resistance. Insulation resistance between roadway inductor and ground shall...

  9. 46 CFR 111.60-21 - Cable insulation tests.

    Science.gov (United States)

    2010-10-01

    ...-GENERAL REQUIREMENTS Wiring Materials and Methods § 111.60-21 Cable insulation tests. All cable for electric power and lighting and associated equipment must be checked for proper insulation resistance to... 46 Shipping 4 2010-10-01 2010-10-01 false Cable insulation tests. 111.60-21 Section...

  10. Insulating process for HT-7U central solenoid model coils

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    The HT-7U superconducting Tokamak is a whole superconducting magnetically confined fusion device. The insulating system of its central solenoid coils is critical to its properties. In this paper the forming of the insulating system and the vacuum-pressure-impregnating (VPI) are introduced, and the whole insulating process is verified under the superconducting experiment condition.

  11. Acoustic quality and sound insulation between dwellings

    DEFF Research Database (Denmark)

    Rindel, Jens Holger

    1998-01-01

    to another, however, several of the results show a slope around 4 % per dB. The results may be used to evaluate the acoustic quality level of a certain set of sound insulation requirements, or they may be used as a basis for specifying the desired acoustic quality of future buildings...

  12. Experimental investigation of topological insulators and superconductors

    NARCIS (Netherlands)

    Pan, Yu

    2016-01-01

    Topological insulators are characterized by a fully gapped bulk and gapless surface states. They have ignited tremendous research activities in the field of condensed matter physics in recent years because of their theoretical research value for novel quantum phenomena and potential practical

  13. Cladding Attachment Over Thick Exterior Insulating Sheathing

    Energy Technology Data Exchange (ETDEWEB)

    Baker, P.; Eng, P.; Lepage, R.

    2014-01-01

    The addition of insulation to the exterior of buildings is an effective means of increasing the thermal resistance of both wood framed walls as well as mass masonry wall assemblies. For thick layers of exterior insulation (levels greater than 1.5 inches), the use of wood furring strips attached through the insulation back to the structure has been used by many contractors and designers as a means to provide a convenient cladding attachment location (Straube and Smegal 2009, Pettit 2009, Joyce 2009, Ueno 2010). The research presented in this report is intended to help develop a better understanding of the system mechanics involved and the potential for environmental exposure induced movement between the furring strip and the framing. BSC sought to address the following research questions: 1. What are the relative roles of the mechanisms and the magnitudes of the force that influence the vertical displacement resistance of the system? 2. Can the capacity at a specified deflection be reliably calculated using mechanics based equations? 3. What are the impacts of environmental exposure on the vertical displacement of furring strips attached directly through insulation back to a wood structure?

  14. Cladding Attachment Over Thick Exterior Insulating Sheathing

    Energy Technology Data Exchange (ETDEWEB)

    Baker, P. [Building Science Corporation, Somerville, MA (United States); Eng, P. [Building Science Corporation, Somerville, MA (United States); Lepage, R. [Building Science Corporation, Somerville, MA (United States)

    2014-01-01

    The addition of insulation to the exterior of buildings is an effective means of increasing the thermal resistance of both wood framed walls as well as mass masonry wall assemblies. For thick layers of exterior insulation (levels greater than 1.5 inches), the use of wood furring strips attached through the insulation back to the structure has been used by many contractors and designers as a means to provide a convenient cladding attachment location (Straube and Smegal 2009, Pettit 2009, Joyce 2009, Ueno 2010). The research presented in this report is intended to help develop a better understanding of the system mechanics involved and the potential for environmental exposure induced movement between the furring strip and the framing. BSC sought to address the following research questions: 1.What are the relative roles of the mechanisms and the magnitudes of the force that influence the vertical displacement resistance of the system? 2.Can the capacity at a specified deflection be reliably calculated using mechanics based equations? 3.What are the impacts of environmental exposure on the vertical displacement of furring strips attached directly through insulation back to a wood structure?

  15. Development of a Generator Stator Insulation System.

    Science.gov (United States)

    1983-04-01

    16 - ’ ’ , .. . .- " ’ m’ mm II- - mm system will see. The primary factors that bear on suitability of an insulation system for this application are...heavily covered with a black gummy deposit. Both of these areas appeared suspect and were investigated further. It appeared that the long-time failure

  16. 49 CFR 179.100-4 - Insulation.

    Science.gov (United States)

    2010-10-01

    ... of sufficient thickness so that the thermal conductance at 60 °F is not more than 0.075 Btu per hour, per square foot, per degree F temperature differential. If exterior heaters are attached to tank, the thickness of the insulation over each heater element may be reduced to one-half that required for the...

  17. 49 CFR 179.200-4 - Insulation.

    Science.gov (United States)

    2010-10-01

    ... sufficient thickness so that the thermal conductance at 60 °F is not more than 0.225 Btu per hour, per square... heaters are attached to tank, the thickness of the insulation over each heater element may be reduced...

  18. Moisture buffer capacity of different insulation materials

    DEFF Research Database (Denmark)

    Peuhkuri, Ruut Hannele; Rode, Carsten; Hansen, Kurt Kielsgaard

    2004-01-01

    lead to more durable constructions. In this paper, a large range of very different thermal insulation materials have been tested in specially constructed laboratory facilities to determine their moisture buffer capacity. Both isothermal and nonisothermal experimental set-ups have been used...

  19. Acoustic quality and sound insulation between dwellings

    DEFF Research Database (Denmark)

    Rindel, Jens Holger

    1999-01-01

    to another, however, several of the results show a slope around 4 % per dB. The results may be used to evaluate the acoustic quality level of a certain set of sound insulation requirements, or they may be used as a basis for specifying the desired acoustic quality of future buildings....

  20. Holographic Entanglement Renormalization of Topological Insulators

    CERN Document Server

    Wen, Xueda; Lopes, Pedro L S; Gu, Yingfei; Qi, Xiao-Liang; Ryu, Shinsei

    2016-01-01

    We study the real-space entanglement renormalization group flows of topological band insulators in (2+1) dimensions by using the continuum multi-scale entanglement renormalization ansatz (cMERA). Given the ground state of a Chern insulator, we construct and study its cMERA by paying attention, in particular, to how the bulk holographic geometry and the Berry curvature depend on the topological properties of the ground state. It is found that each state defined at different energy scale of cMERA carries a nonzero Berry flux, which is emanated from the UV layer of cMERA, and flows towards the IR. Hence, a topologically nontrivial UV state flows under the RG to an IR state, which is also topologically nontrivial. On the other hand, we found that there is an obstruction to construct the exact ground state of a topological insulator with a topologically trivial IR state. I.e., if we try to construct a cMERA for the ground state of a Chern insulator by taking a topologically trivial IR state, the resulting cMERA do...

  1. Using microtherm microporous insulation in smelter applications

    Science.gov (United States)

    MacKenzie, Iain

    2000-02-01

    Microtherm is effective in reducing shell temperatures in confined spaces where compression is severe and much insulation is required. This material can prove beneficial for applications such as cement and lime rotary kiln transition and hot zones; copper converters and anode furnaces; steel and iron ladles, tundishes, RH vessels, and blast furnaces; and aluminum filter boxes, runners, and metal transporters.

  2. Robust Multilayer Insulation for Cryogenic Systems

    Science.gov (United States)

    Fesmire, J. E.; Scholtens, B. F.; Augustynowicz, S. D.

    2007-01-01

    New requirements for thermal insulation include robust Multilayer insulation (MU) systems that work for a range of environments from high vacuum to no vacuum. Improved MLI systems must be simple to install and maintain while meeting the life-cycle cost and thermal performance objectives. Performance of actual MLI systems has been previously shown to be much worse than ideal MLI. Spacecraft that must contain cryogens for both lunar service (high vacuum) and ground launch operations (no vacuum) are planned. Future cryogenic spacecraft for the soft vacuum environment of Mars are also envisioned. Industry products using robust MLI can benefit from improved cost-efficiency and system safety. Novel materials have been developed to operate as excellent thermal insulators at vacuum levels that are much less stringent than the absolute high vacuum requirement of current MLI systems. One such robust system, Layered Composite Insulation (LCI), has been developed by the Cryogenics Test Laboratory at NASA Kennedy Space Center. The experimental testing and development of LCI is the focus of this paper. LCI thermal performance under cryogenic conditions is shown to be six times better than MLI at soft vacuum and similar to MLI at high vacuum. The experimental apparent thermal conductivity (k-value) and heat flux data for LCI systems are compared with other MLI systems.

  3. Characterization of Textile-Insulated Capacitive Biosensors

    Directory of Open Access Journals (Sweden)

    Charn Loong Ng

    2017-03-01

    Full Text Available Capacitive biosensors are an emerging technology revolutionizing wearable sensing systems and personal healthcare devices. They are capable of continuously measuring bioelectrical signals from the human body while utilizing textiles as an insulator. Different textile types have their own unique properties that alter skin-electrode capacitance and the performance of capacitive biosensors. This paper aims to identify the best textile insulator to be used with capacitive biosensors by analysing the characteristics of 6 types of common textile materials (cotton, linen, rayon, nylon, polyester, and PVC-textile while evaluating their impact on the performance of a capacitive biosensor. A textile-insulated capacitive (TEX-C biosensor was developed and validated on 3 subjects. Experimental results revealed that higher skin-electrode capacitance of a TEX-C biosensor yields a lower noise floor and better signal quality. Natural fabric such as cotton and linen were the two best insulating materials to integrate with a capacitive biosensor. They yielded the lowest noise floor of 2 mV and achieved consistent electromyography (EMG signals measurements throughout the performance test.

  4. Holographic entanglement renormalization of topological insulators

    Science.gov (United States)

    Wen, Xueda; Cho, Gil Young; Lopes, Pedro L. S.; Gu, Yingfei; Qi, Xiao-Liang; Ryu, Shinsei

    2016-08-01

    We study the real-space entanglement renormalization group flows of topological band insulators in (2+1) dimensions by using the continuum multiscale entanglement renormalization ansatz (cMERA). Given the ground state of a Chern insulator, we construct and study its cMERA by paying attention, in particular, to how the bulk holographic geometry and the Berry curvature depend on the topological properties of the ground state. It is found that each state defined at different energy scale of cMERA carries a nonzero Berry flux, which is emanated from the UV layer of cMERA, and flows towards the IR. Hence, a topologically nontrivial UV state flows under the renormalization group to an IR state, which is also topologically nontrivial. On the other hand, we found that there is an obstruction to construct the exact ground state of a topological insulator with a topologically trivial IR state. That is, if we try to construct a cMERA for the ground state of a Chern insulator by taking a topologically trivial IR state, the resulting cMERA does not faithfully reproduce the exact ground state at all length scales.

  5. Calculation of Clothing Insulation and Vapour Resistance

    Science.gov (United States)

    1989-10-31

    W.B. Shelley, and T.F. Hatch (1947). Thermal exchanges of man at high temperatures. Am. J. Physiol. 11, 626. Nielsen, R., B.W. Olesen, and P.O. Fanger ...Madsen, and P.O. Fanger (1982). Ef- fect of body posture and activity on the thermal insulation of clothing: measurements by a movable thermal manikin

  6. Creep of granulated loose-fill insulation

    DEFF Research Database (Denmark)

    Rasmussen, Torben Valdbjørn

    with SP-Building Physics in Sweden and VTT Building Technology in Finland. For the round robin test a cellulosic fibre insulation material was used. The proposed standardised method for creep tests and theories are limited to cases when the granulated loose-fill material is exposed to a constant...

  7. Nonflammable, Hydrophobic Aerogel Composites for Insulation

    Science.gov (United States)

    Redouane, Begag

    2005-01-01

    Aerogel composites that are both nonflammable and hydrophobic have been developed for use as lightweight thermal- insulation materials for cryogenic systems. Aerogels are well known in the industry for their effectiveness as thermal insulators under cryogenic conditions, but the treatments used heretofore to render them hydrophobic also make them flammable. Nonflammability would make it safer to use aerogel insulation, especially in oxygen-rich environments and on cryogenic systems that contain liquid oxygen. A composite of this type is a silica aerogel reinforced with fibers. In comparison with unreinforced aerogels, the aerogel composite is about ten times as stiff and strong, better able to withstand handling, and more amenable to machining to required shapes. The composite can be made hydrophobic and nonflammable by appropriate design of a sol-gel process used to synthesize the aerogel component. In addition to very low thermal conductivity needed for insulation, aerogel composites of this type have been found to exhibit high resistance to moisture and nonflammability in oxygen-rich atmospheres: Samples floating on water for months gained no weight and showed no signs of deterioration. Samples were found to be nonflammable, even in pure oxygen at atmospheric pressure [14.7 psia (0.10 MPa)

  8. Chromatin insulation by a transcriptional activator.

    Science.gov (United States)

    Sutter, Nathan B; Scalzo, David; Fiering, Steven; Groudine, Mark; Martin, David I K

    2003-02-04

    In eukaryotic genomes, transcriptionally active regions are interspersed with silent chromatin that may repress genes in its vicinity. Chromatin insulators are elements that can shield a locus from repressive effects of flanking chromatin. Few such elements have been characterized in higher eukaryotes, but transcriptional activating elements are an invariant feature of active loci and have been shown to suppress transgene silencing. Hence, we have assessed the ability of a transcriptional activator to cause chromatin insulation, i.e., to relieve position effects at transgene integration sites in cultured cells. The transgene contained a series of binding sites for the metal-inducible transcriptional activator MTF, linked to a GFP reporter. Clones carrying single integrated transgenes were derived without selection for expression, and in most clones the transgene was silent. Induction of MTF resulted in transition of the transgene from the silent to the active state, prolongation of the active state, and a marked narrowing of the range of expression levels at different genomic sites. At one genomic site, prolonged induction of MTF resulted in suppression of transgene silencing that persisted after withdrawal of the induction stimulus. These results are consistent with MTF acting as a chromatin insulator and imply that transcriptional activating elements can insulate active loci against chromatin repression.

  9. Sound insulation requirements in the Nordic countries

    DEFF Research Database (Denmark)

    Rasmussen, Birgit

    All Nordic countries have sound insulation requirements for housing and sound classification schemes originating from a common INSTA‐proposal in the mid 90’s, but unfortunately being increasingly diversified since then. The present situation impedes development and create barriers for trade and e.......cost.esf.org/index.php?id=240&action_number=TU0901...

  10. Two-dimensional topological crystalline insulator phase in quantum wells of trivial insulators

    Science.gov (United States)

    Niu, Chengwang; Buhl, Patrick M.; Bihlmayer, Gustav; Wortmann, Daniel; Blügel, Stefan; Mokrousov, Yuriy

    2016-06-01

    The realization of two-dimensional (2D) topological insulators (TIs) in HgTe/CdTe quantum wells (QWs) has generated an explosion of research on TIs and novel topologically nontrivial phases. Here we predict, based on first-principles calculations, that the newly discovered 2D topological crystalline insulators (TCIs) phase exists even in the QWs of trivial insulators, e.g. (Sn/Pb)Te and Na(Cl/Br), with mirror Chern number {n}{{M}}=-2. Tunable nontrivial energy gaps ranging from 4 to 238 meV are obtained, guaranteeing further room-temperature observations and applications. The combined effect of strain and electrostatic interaction that can be engineered by the cladding layers leads to a band inversion, resulting in the phase transition from trivial insulator to 2D TCIs. Our work provides a new strategy for engineering topological states in 2D materials.

  11. Effect of Stress on Transformer Insulation

    Directory of Open Access Journals (Sweden)

    Kapil Gandhi

    2012-06-01

    Full Text Available Power transformers use Kraft paper as insulation in the electrical windings present in the core, which is immersed in oil. In service, the temperature of the windings of core will go to 750C to 850C. If the transformer is over loaded, then the temperature can exceed upto 100°C causing the cellulose chains in the paper to cleave at an accelerated rate, which results in the degradation of mechanical strength and performance of the insulation. The Degree of Polymerization (DP will also decrease. If proper action will not take, this can lead to failure of the transformer and disruption to electricity supply and large economic losses to the operating utility. Transformer condition should be maintained because of its importance to electricity network. The life of transformer depends on the life of the oil impregnated paper insulation system to greater extent. Degradation of the cellulose insulation is an irreversible process. After thermal degradation of the paper winding, Furfuraldehyde (FFA is the chemical compound, which is released into the oil from paper. The concentration of FFA has been directly related to the condition of the paper insulation. In the present paper an experimental investigation has been made to evaluate the degradation of transformer oil contaminated by nano-particles of pine wood under accelerated thermal and electrical stress and results are correlated with breakdown strength, density & interfacial tension of the pure oil. The contaminated oil samples are tested at electric stress of 2.0 kV, 3.0 kV, 4.0 kV & 5.0 kV for 24, 48, 72 & 96 hours simultaneously.

  12. Oxide ultrathin films science and technology

    CERN Document Server

    Pacchioni, Gianfranco

    2012-01-01

    A wealth of information in one accessible book. Written by international experts from multidisciplinary fields, this in-depth exploration of oxide ultrathin films covers all aspects of these systems, starting with preparation and characterization, and going on to geometrical and electronic structure, as well as applications in current and future systems and devices. From the Contents: Synthesis and Preparation of Oxide Ultrathin FilmsCharacterization Tools of Oxide Ultrathin FilmsOrdered Oxide Nanostructures on Metal SurfacesUnusual Properties of Oxides and Other Insulators in the Ultrathin Li

  13. High-performance insulator structures for accelerator applications

    Energy Technology Data Exchange (ETDEWEB)

    Sampayan, S.E.; Caporaso, G.J.; Sanders, D.M.; Stoddard, R.D.; Trimble, D.O. [Lawrence Livermore National Lab., CA (United States); Elizondo, J.; Krogh, M.L.; Wieskamp, T.F. [Allied Signal, Inc., Kansas City, MO (United States). Federal Mfg. and Technologies

    1997-05-01

    A new, high gradient insulator technology has been developed for accelerator systems. The concept involves the use of alternating layers of conductors and insulators with periods of order 1 mm or less. These structures perform many times better (about 1.5 to 4 times higher breakdown electric field) than conventional insulators in long pulse, short pulse, and alternating polarity applications. We describe our ongoing studies investigating the degradation of the breakdown electric field resulting from alternate fabrication techniques, the effect of gas pressure, the effect of the insulator-to-electrode interface gap spacing, and the performance of the insulator structure under bi-polar stress.

  14. Insulating coupling for drill collars and method of manufacture thereof

    Energy Technology Data Exchange (ETDEWEB)

    Stone, F.A.; Maron, R.J.

    1987-06-23

    This patent describes an insulating drill collar joint, including: a first metallic drill collar segment having a first threaded section with a coating of electrically insulating ceramic material; insulating coating in the range of from 0.002 to 0.006 inch thick; and a second metallic drill collar segment connected to first drill collar segment; second drill collar segment having a second threaded section engaged with the insulation coated section of the first drill collar section. An electrically insulated drill collar joint is formed.

  15. Insulators and Boundaries: Versatile Regulatory Elements in the Eukaryotic Genome

    Science.gov (United States)

    Bell, Adam C.; West, Adam G.; Felsenfeld, Gary

    2001-01-01

    Insulators mark the boundaries of chromatin domains by limiting the range of action of enhancers and silencers. Although the properties of insulators have been well studied, their role in vivo has largely been a subject of speculation. Recent results make it possible to ascribe specific and essential functions to the insulators of Drosophila, yeast, and vertebrates. In some cases, insulator activity can be modulated by nearby regulatory elements, bound cofactors, or covalent modification of the DNA. Not simply passive barriers, insulators are active participants in eukaryotic gene regulation.

  16. Optoelectronic devices, plasmonics, and photonics with topological insulators

    Science.gov (United States)

    Politano, Antonio; Viti, Leonardo; Vitiello, Miriam S.

    2017-03-01

    Topological insulators are innovative materials with semiconducting bulk together with surface states forming a Dirac cone, which ensure metallic conduction in the surface plane. Therefore, topological insulators represent an ideal platform for optoelectronics and photonics. The recent progress of science and technology based on topological insulators enables the exploitation of their huge application capabilities. Here, we review the recent achievements of optoelectronics, photonics, and plasmonics with topological insulators. Plasmonic devices and photodetectors based on topological insulators in a wide energy range, from terahertz to the ultraviolet, promise outstanding impact. Furthermore, the peculiarities, the range of applications, and the challenges of the emerging fields of topological photonics and thermo-plasmonics are discussed.

  17. Vacuum Insulator Development for the Dielectric Wall Accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Harris, J R; Blackfield, D; Caporaso, G J; Chen, Y; Hawkins, S; Kendig, M; Poole, B; Sanders, D M; Krogh, M; Managan, J E

    2008-03-17

    At Lawrence Livermore National Laboratory, we are developing a new type of accelerator, known as a Dielectric Wall Accelerator, in which compact pulse forming lines directly apply an accelerating field to the beam through an insulating vacuum boundary. The electrical strength of this insulator may define the maximum gradient achievable in these machines. To increase the system gradient, we are using 'High Gradient Insulators' composed of alternating layers of dielectric and metal for the vacuum insulator. In this paper, we present our recent results from experiment and simulation, including the first test of a High Gradient Insulator in a functioning Dielectric Wall Accelerator cell.

  18. Ultrastable Natural Ester-Based Nanofluids for High Voltage Insulation Applications.

    Science.gov (United States)

    Peppas, Georgios D; Bakandritsos, Aristides; Charalampakos, Vasilis P; Pyrgioti, Eleftheria C; Tucek, Jiri; Zboril, Radek; Gonos, Ioannis F

    2016-09-28

    Nanofluids for high voltage insulation systems have emerged as a potential substitute for liquid dielectrics in industrial applications. Nevertheless, the sedimentation of nanoparticles has been so far a serious barrier for their wide and effective exploitation. The present work reports on the development and in-depth characterization of colloidally ultrastable natural ester oil insulation systems containing iron oxide nanocrystals which lift the problem of sedimentation and phase separation. Compared to state-of-the-art systems, the final product is endowed with increased dielectric strength, faster thermal response, lower dielectric losses (decreased dissipation factor: tan δ), and very high endurance during discharge stressing. The developed nanofluid was studied and compared with a similar system containing commercial iron oxide nanoparticles, the latter demonstrating extensive sedimentation. Herein, the dielectric properties of the nanofluids are analyzed at various concentrations by means of breakdown voltage and dissipation factor measurements. The characterization techniques unequivocally demonstrate the high performance reliability of the reported nanofluid, which constitutes a significant breakthrough in the field of high voltage insulation technologies.

  19. Reflective Coating on Fibrous Insulation for Reduced Heat Transfer

    Science.gov (United States)

    Hass, Derek D.; Prasad, B. Durga; Glass, David E.; Wiedemann, Karl E.

    1997-01-01

    Radiative heat transfer through fibrous insulation used in thermal protection systems (TPS) is significant at high temperatures (1200 C). Decreasing the radiative heat transfer through the fibrous insulation can thus have a major impact on the insulating ability of the TPS. Reflective coatings applied directly to the individual fibers in fibrous insulation should decrease the radiative heat transfer leading to an insulation with decreased effective thermal conductivity. Coatings with high infrared reflectance have been developed using sol-gel techniques. Using this technique, uniform coatings can be applied to fibrous insulation without an appreciable increase in insulation weight or density. Scanning electron microscopy, Fourier Transform infrared spectroscopy, and ellipsometry have been performed to evaluate coating performance.

  20. Analysis and Experimental on Aircraft Insulation Thermal Bridge Effect

    Directory of Open Access Journals (Sweden)

    XIA Tian

    2017-06-01

    Full Text Available Two kinds of typical aircraft insulation structures were designed for the heat bridge in the metal ribs of aircraft insulation structures. In order to study the influence of heat bridge effect on thermal insulation performance, each configuration was analyzed by the transient heat transfer FEA, check point temperature was obtained in the hot surface temperature of 100 ℃, 200 ℃, 300 ℃, 424 ℃ respectively, and the validity of FEA was proved by insulation performance experiment. The result showed that the thermal bridge has a great influence to the insulation performance of insulation structure, and the thermal bridge influence should be considered adequately when the insulation structure designed. Additionally, the blocking method for thermal bridge is also put forward.

  1. The Wick-Concept for Thermal Insulation of Cold Piping

    DEFF Research Database (Denmark)

    Koverdynsky, Vit; Korsgaard, Vagn; Rode, Carsten

    2006-01-01

    . This will prevent long-term accumulation of moisture in the insulation material. The wick keeps the hydrophobic insulation dry, allowing it to maintain its thermal performance. The liquid moisture is kept only in the wick fabric. This article presents the principle of operation of cold pipe insulation using......The wick-concept for thermal insulation of cold piping is based on capillary suction of a fiber fabric to remove excess water from the pipe surface by transporting it to the outer surface of the insulation. From the surface of the insulation jacket, the water will evaporate to the ambient air...... that the variations of these types of insulation systems work for pipes with temperature above 0C and for ambient conditions within common ranges for industrial applications....

  2. Electron-beam-assisted Scanning Tunneling Microscopy Of Insulating Surfaces

    CERN Document Server

    Bullock, E T

    2000-01-01

    Insulating materials are widely used in electronic devices. Bulk insulators and insulating films pose unique challenges for high resolution study since most commonly used charged particle surface analysis techniques are incompatible with insulating surfaces and materials. A, method of performing scanning tunneling microscopy (STM) on insulating surfaces has been investigated. The method is referred to as electron-beam assisted scanning tunneling microscopy (e-BASTM). It is proposed that by coupling the STM and the scanning electron microscopy (SEM) as one integrated device, that insulating materials may be studied, obtaining both high spatial resolution, and topographic and electronic resolution. The premise of the technique is based on two physical consequences of the interaction of an energetic electron beam (PE) with a material. First, when an electron beam is incident upon a material, low level material electrons are excited into conduction band states. For insulators, with very high secondary electron yi...

  3. Economical evaluation of damaged vacuum insulation panels in buildings

    Science.gov (United States)

    Kim, Y. M.; Lee, H. Y.; Choi, G. S.; Kang, J. S.

    2015-12-01

    In Korea, thermal insulation standard of buildings have been tightened annually to satisfy the passive house standard from the year 2009. The current domestic policies about disseminating green buildings are progressively conducted. All buildings should be the zero energy building in the year 2025, obligatorily. The method is applied to one of the key technologies for high-performance insulation for zero energy building. The vacuum insulation panel is an excellent high performance insulation. But thermal performance of damaged vacuum insulation panels is reduced significantly. In this paper, the thermal performance of damaged vacuum insulation panels was compared and analyzed. The measurement result of thermal performance depends on the core material type. The insulation of building envelope is usually selected by economic feasibility. To evaluate the economic feasibility of VIPs, the operation cost was analyzed by simulation according to the types and damaged ratio of VIPs

  4. Two-dimensional superconductivity at a Mott insulator/band insulator interface LaTiO3/SrTiO3.

    Science.gov (United States)

    Biscaras, J; Bergeal, N; Kushwaha, A; Wolf, T; Rastogi, A; Budhani, R C; Lesueur, J

    2010-10-05

    Transition metal oxides show a great variety of quantum electronic behaviours where correlations often have an important role. The achievement of high-quality epitaxial interfaces involving such materials gives a unique opportunity to engineer artificial structures where new electronic orders take place. One of the most striking result in this area is the recent observation of a two-dimensional electron gas at the interface between a strongly correlated Mott insulator LaTiO(3) and a band insulator SrTiO(3). The mechanism responsible for such a behaviour is still under debate. In particular, the influence of the nature of the insulator has to be clarified. In this article, we show that despite the expected electronic correlations, LaTiO(3)/SrTiO(3) heterostructures undergo a superconducting transition at a critical temperature T(c)(onset)~300 mK. We have found that the superconducting electron gas is confined over a typical thickness of 12 nm and is located mostly on the SrTiO(3) substrate.

  5. Effect of fillers and fire retardant compounds on hydroxy terminated polybutadiene based insulators

    Directory of Open Access Journals (Sweden)

    S. D. Kakade

    2001-04-01

    Full Text Available A series of polyurethane compositions have been formulated using hydroxy-terminated polybutadiene as polymeric binder and carbon black as a major filler. Various binder-to-filler ratios of the formulations were evaluated to get calendered sheets. The formulations have been characterised for pot-life and rollability and the calendered sheets for mechanical and thermal properties, bUm rate, glass transition temperature, shore hardness and density . The different fillers tried were varieties of carbon black as a major filler; metal oxides, silicates and organic compounds; and fire retardants, such as zinc borate, sodium metaborate, ammonium dihydrogen phosphate and antimony trioxide. The structure and morphology of the fillers have been correlated with the properties. The optimised composition has been evaluated in an end-burning motor, as an insulator for case-bonded application, using a typical composite propellant. The results of interface bonding between the propellant and the insulator have also been presented.

  6. Inverse effect in simultaneous thermal and radiation aging of EVA insulation

    Directory of Open Access Journals (Sweden)

    G. Przybytniak

    2015-04-01

    Full Text Available Poly(ethylene-co-vinyl acetate (EVA insulation of the cable applied in nuclear power plants was accelerated aged by gamma-rays at two various temperatures, namely 55 and 85°C. Radiation degradation in the dose range of 0–1500 kGy was monitored using a Differential Scanning Calorimetry method by measuring oxidative induction temperature (OITp, gel fraction, mechanical and electrical tests. It was confirmed that a dose rate effect in the range of 420–1500 Gy/h was negligible whereas progress of degradation with increasing dose was strongly temperature dependent. For the insulation accelerated aged at 85°C the OITp and permittivity measurements confirmed lower degradation than for the specimens radiation treated at 55°C at the same dose rates. It was postulated that an inverse thermal effect resulted from radiation induced cross-linking facilitated by melting of EVA crystallites at 85°C.

  7. Observation of photonic anomalous Floquet topological insulators

    Science.gov (United States)

    Maczewsky, Lukas J.; Zeuner, Julia M.; Nolte, Stefan; Szameit, Alexander

    2017-01-01

    Topological insulators are a new class of materials that exhibit robust and scatter-free transport along their edges -- independently of the fine details of the system and of the edge -- due to topological protection. To classify the topological character of two-dimensional systems without additional symmetries, one commonly uses Chern numbers, as their sum computed from all bands below a specific bandgap is equal to the net number of chiral edge modes traversing this gap. However, this is strictly valid only in settings with static Hamiltonians. The Chern numbers do not give a full characterization of the topological properties of periodically driven systems. In our work, we implement a system where chiral edge modes exist although the Chern numbers of all bands are zero. We employ periodically driven photonic waveguide lattices and demonstrate topologically protected scatter-free edge transport in such anomalous Floquet topological insulators.

  8. Thermal Radiative Properties of Xonotlite Insulation Material

    Institute of Scientific and Technical Information of China (English)

    Xinxin ZHANG; Gaosheng WEI; Fan YU

    2005-01-01

    This paper presents experimental results of thermal radiative properties of xonotlite-type calcium silicate insulation material. Transmittance spectra were first taken using Fourier transform infrared spectrometer (FTIR)for the samples with ρ = 234 kg/m3. Specific extinction coefficient spectra were then obtained by applying Beer's law.Finally,by using the diffusion approximation,the specific Rossland mean extinction coefficients and radiative thermal conductivities were obtained for various temperatures. The results show that the specific spectral extinction coefficient of xonotlite is larger than 7 m2/kg in the whole measured spectra, and diffusion approximation equation is a reasonable description of radiative heat transfer in xonotlite insulation material. The specific Rossland mean extinction coefficient of xonotlite has a maximum ualue at 400 K and the radiative thermal conductivity is almost proportional to the cube of temperature.

  9. Topological insulator-based energy efficient devices

    Science.gov (United States)

    Chen, Yong P.

    2012-06-01

    Topological insulators (TI) have emerged as a new class of quantum materials with many novel and unusual properties. In this article, we will give a brief review of the key electronic properties of topological insulators, including the signatures for the unusual electronic transport properties of their characteristic topological surface states (TSS). We will then discuss how these novel properties and physics may be utilized for TI-based energy efficient devices, such as lowpower- consumption electronics and high performance thermo-electrics. Furthermore, going beyond conventional singleparticle, charge-based transport, to utilize coherent many-body coherent ground states such as excitonic condensates (EC), new and intriguing functionalities previously unexplored in electronic and energy devices may be realized with the potential to dramatically improve the energy efficiency.

  10. High voltage and electrical insulation engineering

    CERN Document Server

    Arora, Ravindra

    2011-01-01

    "The book is written for students as well as for teachers and researchers in the field of High Voltage and Insulation Engineering. It is based on the advance level courses conducted at TU Dresden, Germany and Indian Institute of Technology Kanpur, India. The book has a novel approach describing the fundamental concept of field dependent behavior of dielectrics subjected to high voltage. There is no other book in the field of high voltage engineering following this new approach in describing the behavior of dielectrics. The contents begin with the description of fundamental terminology in the subject of high voltage engineering. It is followed by the classification of electric fields and the techniques of field estimation. Performance of gaseous, liquid and solid dielectrics under different field conditions is described in the subsequent chapters. Separate chapters on vacuum as insulation and the lightning phenomenon are included"--

  11. Junction between surfaces of two topological insulators

    Science.gov (United States)

    Sen, Diptiman; Deb, Oindrila

    2012-02-01

    We study scattering from a line junction which separates the surfaces of two three-dimensional topological insulators; some aspects of this problem were recently studied in Takahashi and Murakami, Phys. Rev. Lett. 107, 166805 (2011). The velocities of the Dirac electrons on the two surfaces may be unequal and may even have opposite signs; in the latter case, we find that the electrons must, in general, go into the two-dimensional interface separating the two topological insulators. We also study what happens if the two surfaces are at an angle φ with respect to each other. We find in this case that there are bound states which propagate along the line junction with a velocity and direction of spin which depend on the bending angle φ.

  12. Edge excitations in fractional Chern insulators

    Science.gov (United States)

    Luo, Wei-Wei; Chen, Wen-Chao; Wang, Yi-Fei; Gong, Chang-De

    2013-10-01

    Recent theoretical papers have demonstrated the realization of fractional quantum anomalous Hall states (also called fractional Chern insulators) in topological flat band lattice models without an external magnetic field. Such newly proposed lattice systems play a vital role in obtaining a large class of fractional topological phases. Here we report the exact numerical studies of edge excitations for such systems in a disk geometry loaded with hard-core bosons, which will serve as a more viable experimental probe for such topologically ordered states. We find convincing numerical evidence of a series of edge excitations characterized by the chiral Luttinger liquid theory for the bosonic fractional Chern insulators in both the honeycomb disk Haldane model and the kagome-lattice disk model. We further verify these current-carrying chiral edge states by inserting a central flux to test their compressibility.

  13. Optical Properties of Topological Insulator Bragg Gratings

    CERN Document Server

    Crosse, J A

    2015-01-01

    Using the transfer matrix formalism, we study the transmission properties of a Bragg grating constructed from a layered axionic material. Such a material can be realized by a topological insulator subject to a time-symmetry breaking perturbation, such as an external magnetic field or surface magnetic impurities. Whilst the reflective properties of the structure are only negligibly changed by the presence of the axionic material, the grating induces Faraday and Kerr rotations in the transmitted and reflected light, respectively. These rotations are proportional to the number of layers and the strength of the time-symmetry breaking perturbation. In areas of low reflectivity the rotation angle of TE polarization decreases with increasing incidence angle while the TM polarization increases with increasing incidence angle with the converse occurring in areas of high reflectivity. The formalism and results will be useful in the development of optical and photonic devices based on topological insulators, devices whi...

  14. High-temperature insulation; Hochtemperatur-Waermeisolierung

    Energy Technology Data Exchange (ETDEWEB)

    Fuehres, M.

    1995-12-31

    For high-temperature insulations of industrial plants in the temperature range above 800 C preferably fibrous insulating materials are used. For this purpose ceramic fibres are more and more used. Apart from energy conservation possibilities up to 50% ceramic fibre products are characterized by a large field of the most different applications compared to conventional fire-resistant materials such as stone and compounds. The properties, production and the field of application are gone into in detail. (BWI) [Deutsch] In der Hochtemperaturisolierung industrieller Anlagen werden im Temperaturbereich oberhalb von 800 C bevorzugt faserfoermige Daemmstoffe eingesetzt. In zunehmendem Masse werden hierzu Keramikfasern eingesetzt. Neben den Einsparmoeglichkeiten im Energieverbrauch von bis zu 50% gegenueber konventionellen feuerfesten Werkstoffen wie Steinen und Massen zeichnen sich Keramikfaser-Produkte durch eine breite Palette vielfaeltigster Einsatzmoeglichkeiten aus. Es wird ausfuehrlich auf Eigenschaften, Herstellung und Einsatzmoeglichkeiten eingegangen. (BWI)

  15. Magnetic fluctuations driven insulator-to-metal transition in Ca(Ir1-xRux)O3

    Science.gov (United States)

    Gunasekera, J.; Harriger, L.; Dahal, A.; Heitmann, T.; Vignale, G.; Singh, D. K.

    2015-12-01

    Magnetic fluctuations in transition metal oxides are a subject of intensive research because of the key role they are expected to play in the transition from the Mott insulator to the unconventional metallic phase of these materials, and also as drivers of superconductivity. Despite much effort, a clear link between magnetic fluctuations and the insulator-to-metal transition has not yet been established. Here we report the discovery of a compelling link between magnetic fluctuations and the insulator-to-metal transition in Ca(Ir1-xRux)O3 perovskites as a function of the substitution coefficient x. We show that when the material turns from insulator to metal, at a critical value of x ~ 0.3, magnetic fluctuations tend to change their character from antiferromagnetic, a Mott insulator phase, to ferromagnetic, an itinerant electron state with Hund’s orbital coupling. These results are expected to have wide-ranging implications for our understanding of the unconventional properties of strongly correlated electrons systems.

  16. Magnetic fluctuations driven insulator-to-metal transition in Ca(Ir1−xRux)O3

    Science.gov (United States)

    Gunasekera, J.; Harriger, L.; Dahal, A.; Heitmann, T.; Vignale, G.; Singh, D. K.

    2015-01-01

    Magnetic fluctuations in transition metal oxides are a subject of intensive research because of the key role they are expected to play in the transition from the Mott insulator to the unconventional metallic phase of these materials, and also as drivers of superconductivity. Despite much effort, a clear link between magnetic fluctuations and the insulator-to-metal transition has not yet been established. Here we report the discovery of a compelling link between magnetic fluctuations and the insulator-to-metal transition in Ca(Ir1−xRux)O3 perovskites as a function of the substitution coefficient x. We show that when the material turns from insulator to metal, at a critical value of x ~ 0.3, magnetic fluctuations tend to change their character from antiferromagnetic, a Mott insulator phase, to ferromagnetic, an itinerant electron state with Hund’s orbital coupling. These results are expected to have wide-ranging implications for our understanding of the unconventional properties of strongly correlated electrons systems. PMID:26647965

  17. Oxygen Vacancy Induced Room-Temperature Metal-Insulator Transition in Nickelate Films and Its Potential Application in Photovoltaics.

    Science.gov (United States)

    Wang, Le; Dash, Sibashisa; Chang, Lei; You, Lu; Feng, Yaqing; He, Xu; Jin, Kui-juan; Zhou, Yang; Ong, Hock Guan; Ren, Peng; Wang, Shiwei; Chen, Lang; Wang, Junling

    2016-04-20

    Oxygen vacancy is intrinsically coupled with magnetic, electronic, and transport properties of transition-metal oxide materials and directly determines their multifunctionality. Here, we demonstrate reversible control of oxygen content by postannealing at temperature lower than 300 °C and realize the reversible metal-insulator transition in epitaxial NdNiO₃ films. Importantly, over 6 orders of magnitude in the resistance modulation and a large change in optical bandgap are demonstrated at room temperature without destroying the parent framework and changing the p-type conductive mechanism. Further study revealed that oxygen vacancies stabilized the insulating phase at room temperature is universal for perovskite nickelate films. Acting as electron donors, oxygen vacancies not only stabilize the insulating phase at room temperature, but also induce a large magnetization of ∼50 emu/cm³ due to the formation of strongly correlated Ni²⁺ t(2g)⁶e(g)² states. The bandgap opening is an order of magnitude larger than that of the thermally driven metal-insulator transition and continuously tunable. Potential application of the newly found insulating phase in photovoltaics has been demonstrated in the nickelate-based heterojunctions. Our discovery opens up new possibilities for strongly correlated perovskite nickelates.

  18. Measured moisture properties for alternative insulation products

    DEFF Research Database (Denmark)

    Hansen, Ernst Jan De Place; Hansen, Kurt Kielsgaard; Padfield, Tim

    1999-01-01

    During the past few years there has been a growing interest in using alternative insulation products in buildings. Among these products are the organic materials cellulose fibre, flax and sheep's wool as well as the inorganic perlite. The organic materials are regarded with some suspicion, because...... of their hygroscopicity. This paper describes two of the moisture-related properties of these materials: the water sorption and the water vapour transmission. For reference, some mineral fibre products are studied as well....

  19. Modification of electrical properties of topological insulators

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, Peter Anand

    2017-08-29

    Ion implantation or deposition can be used to modify the bulk electrical properties of topological insulators. More particularly, ion implantation or deposition can be used to compensate for the non-zero bulk conductivity due to extrinsic charge carriers. The direct implantation of deposition/annealing of dopants allows better control over carrier concentrations for the purposes of achieving low bulk conductivity. Ion implantation or deposition enables the fabrication of inhomogeneously doped structures, enabling new types of device designs.

  20. Electronic correlations in insulators, metals and superconductors

    Energy Technology Data Exchange (ETDEWEB)

    Sentef, Michael Andreas

    2010-12-03

    In this thesis dynamical mean-field methods in combination with a continuous-time quantum Monte Carlo impurity solver are used to study selected open problems of condensed matter theory. These problems comprise the effect of correlations and their quantification in covalent band insulators, non-local correlation effects and their intriguing consequences in frustrated two-dimensional systems, and a phenomenological approach to investigate temperature-dependent transport in graphene in the presence of disorder. (orig.)

  1. Measured moisture properties for alternative insulation products

    DEFF Research Database (Denmark)

    Hansen, Ernst Jan De Place; Hansen, Kurt Kielsgaard; Padfield, Tim

    1999-01-01

    During the past few years there has been a growing interest in using alternative insulation products in buildings. Among these products are the organic materials cellulose fibre, flax and sheep's wool as well as the inorganic perlite. The organic materials are regarded with some suspicion, because...... of their hygroscopicity. This paper describes two of the moisture-related properties of these materials: the water sorption and the water vapour transmission. For reference, some mineral fibre products are studied as well....

  2. Excavationless Exterior Foundation Insulation Exploratory Study

    Energy Technology Data Exchange (ETDEWEB)

    Mosiman, G.; Wagner, R.; Schirber, T.

    2013-02-01

    The key objective of this exploratory study was to investigate the feasibility of the development or adoption of technologies that would enable a large percentage of existing homes in cold climates to apply a combination 'excavationless' soil removal process with appropriate insulation and water management on the exterior of existing foundations at a low cost. Our approach was to explore existing excavation and material technologies and systems to discover whether potential successful combinations existed.

  3. Topological insulator in a helicoidal magnetization field

    Science.gov (United States)

    Stagraczyński, S.; Chotorlishvili, L.; Dugaev, V. K.; Jia, C.-L.; Ernst, A.; Komnik, A.; Berakdar, J.

    2016-11-01

    A key feature of topological insulators is the robustness of the electron energy spectrum. At a surface of a topological insulator, the Dirac point is protected by the characteristic symmetry of the system. The breaking of the symmetry opens a gap in the energy spectrum. Therefore, topological insulators are very sensitive to magnetic fields, which can open a gap in the electronic spectrum. Concerning "internal" magnetic effects, for example, the situation with doped magnetic impurities, is not trivial. A single magnetic impurity is not enough to open the band gap, while in the case of a ferromagnetic chain of deposited magnetic impurities the Dirac point is lifted. However, a much more interesting case is when localized magnetic impurities form a chiral spin order. Our first principle density functional theory calculations have shown that this is the case for Fe deposited on the surface of a Bi2Se3 topological insulator. But not only magnetic impurities can form a chiral helicoidal spin texture. An alternative way is to use chiral multiferroics (prototype material is LiCu2O2 ) that induce a proximity effect. The theoretical approach we present here is valid for both cases. We observed that opposite to a ferromagnetically ordered case, a chiral spin order does not destroy the Dirac point. We also observed that the energy gap appears at the edges of the new Brillouin zone. Another interesting result concerns the spin dynamics. We derived an equation for the spin density dynamics with a spin current and relaxation terms. We have shown that the motion of the conductance electron generates a magnetic torque and exerts a certain force on the helicoidal texture.

  4. Excavationless Exterior Foundation Insulation Exploratory Study

    Energy Technology Data Exchange (ETDEWEB)

    Mosimann, Garrett [Univ. of Minnesota, St. Paul, MN (United States). NorthernSTAR Building America Partnership; Wagner, Rachel [Univ. of Minnesota, St. Paul, MN (United States). NorthernSTAR Building America Partnership; Schirber, Tom [Univ. of Minnesota, St. Paul, MN (United States). NorthernSTAR Building America Partnership

    2013-02-01

    The key objective of this exploratory study was to investigate the feasibility of the development or adoption of technologies that would enable a large percentage of existing homes in cold climates to apply a combination 'excavationless' soil removal process with appropriate insulation and water management on the exterior of existing foundations at a low cost. Our approach was to explore existing excavation and material technologies and systems to discover whether potential successful combinations existed.

  5. Thermal Insulation System for Large Flame Buckets

    Science.gov (United States)

    Callens, E. Eugene, Jr.; Gamblin, Tonya Pleshette

    1996-01-01

    The objective of this study is to investigate the use of thermal protection coatings, single tiles, and layered insulation systems to protect the walls of the flame buckets used in the testing of the Space Shuttle Main Engine, while reducing the cost and maintenance of the system. The physical behavior is modeled by a plane wall boundary value problem with a convective frontface condition and a backface condition designed to provide higher heat rates through the material.

  6. Superconducting nano-layer coating without insulator

    CERN Document Server

    Kubo, Takayuki

    2014-01-01

    The superconducting nano-layer coating without insulator layer is studied. The magnetic-field distribution and the forces acting on a vortex are derived. Using the derived forces, the vortex-penetration field and the lower critical magnetic field can be discussed. The vortex-penetration field is identical with the multilayer coating, but the lower critical magnetic field is not. Forces acting on a vortex from the boundary of two superconductors play an important role in evaluations of the free energy.

  7. Simulation and Experimental Determination of Technological Liquid Molding Parameters of Tubing Basalt Insulation

    Directory of Open Access Journals (Sweden)

    Yu. V. Badanina

    2015-01-01

    Full Text Available The article is dedicated to one of the most important and urgent tasks in mechanical engineering development - the creation of low-density and environmentally-friendly thermoinsulation from available cheap basalt fibers for products to operate at temperatures up to 700°C.One of the most effective applications of such thermo-insulation is to develop and provide highly porous coatings from short basalt fibers by liquid filtration for tubing (T to supply superheated up to 420° C steam under pressure of 35 MPa in the deep layers with severe highviscosity oil. Tubing with the short low-density basalt insulation can be used for a greater depth than the vacuum-insulated tubing, which are also called "thermo-cases", and do not fully meet business needs for long-term reliability of oil vacuum tubes, too large mass per unit length of their design and, as a consequence, the impossibility to use such pipes for deep wells.The aim of the work is to simulate a liquid filtration process of short fibers and determine technological parameters of producing thermal insulation coatings of tubing pipes from basalt fibers and mineral binder shaped as cylinders and cylindrical shells. The paper proposes a mathematical model of free filtration deposition of short fibers from liquid slurry, which describes dynamics of creating thermal insulation products and allows us to determine the rational parameters of their manufacturing process. It shows methods to improve the products quality while forming the thermal insulation by filtration through additional vacuum deposition of a filtrate chamber and the final prepressing of sediment layer, giving dimensions and shape to the final product.The paper defines a prescription hydro mass composition. It shows that to increase the compressive strength of highly fibrous rings and cylindrical shells it is necessary to use based on oxide А12O3 5-7% by weight mineral binder, which fixes basalt fibers in places of their contacts. It

  8. A NEW OPTIMISED DESIGN OF SINGLE PHASE GAS INSULATED CONE TYPE INSULATOR

    Directory of Open Access Journals (Sweden)

    M. GOPI CHAND NAIK

    2012-03-01

    Full Text Available The Gas Insulated Substation (GIS have various advantages like Compactness, immunity from environmental conditions, high operational reliability, low maintenance cost. In a number of GIS installations, the main design considerations involved in gas insulated equipment are at cone insulator, gas and metal interface. Hence there isa need for control of electric stresses in order to reduce internal discharges, surface discharges to the enclosure surface. In conventional approach, in order to reduce such distortion of electric field, many techniques are applied like, control of the spacer shape, additional shielding of electrodes for relaxation of electric field around spacer and low permittivity of spacer material. The new techniques of Functionally Gradient Material (FGMspacer has been proposed in this paper. In this paper the applicability of FGM spacer for gas insulated power apparatus has been verified. In the FGM spacer, a spatial distribution of permittivity for the control of theelectric field distribution in and around the spacer is used. The electric field calculations for several types of FGM spacers have been carried out using Finite Element Method (FEM. The electric field distribution along the radial distance of the spacer insulator have been obtained for various FGM materials and results arecompared.

  9. Integrated Electrical Wire Insulation Repair System

    Science.gov (United States)

    Williams, Martha; Jolley, Scott; Gibson, Tracy; Parks, Steven

    2013-01-01

    An integrated system tool will allow a technician to easily and quickly repair damaged high-performance electrical wire insulation in the field. Low-melt polyimides have been developed that can be processed into thin films that work well in the repair of damaged polyimide or fluoropolymer insulated electrical wiring. Such thin films can be used in wire insulation repairs by affixing a film of this low-melt polyimide to the damaged wire, and heating the film to effect melting, flow, and cure of the film. The resulting repair is robust, lightweight, and small in volume. The heating of this repair film is accomplished with the use of a common electrical soldering tool that has been modified with a special head or tip that can accommodate the size of wire being repaired. This repair method can furthermore be simplified for the repair technician by providing replaceable or disposable soldering tool heads that have repair film already "loaded" and ready for use. The soldering tool heating device can also be equipped with a battery power supply that will allow its use in areas where plug-in current is not available

  10. Topology of nonsymmorphic crystalline insulators and superconductors

    Science.gov (United States)

    Shiozaki, Ken; Sato, Masatoshi; Gomi, Kiyonori

    2016-05-01

    Topological classification in our previous paper [K. Shiozaki and M. Sato, Phys. Rev. B 90, 165114 (2014), 10.1103/PhysRevB.90.165114] is extended to nonsymmorphic crystalline insulators and superconductors. Using the twisted equivariant K theory, we complete the classification of topological crystalline insulators and superconductors in the presence of additional order-two nonsymmorphic space-group symmetries. The order-two nonsymmorphic space groups include half-lattice translation with Z2 flip, glide, twofold screw, and their magnetic space groups. We find that the topological periodic table shows modulo-2 periodicity in the number of flipped coordinates under the order-two nonsymmorphic space group. It is pointed out that the nonsymmorphic space groups allow Z2 topological phases even in the absence of time-reversal and/or particle-hole symmetries. Furthermore, the coexistence of the nonsymmorphic space group with time-reversal and/or particle-hole symmetries provides novel Z4 topological phases, which have not been realized in ordinary topological insulators and superconductors. We present model Hamiltonians of these new topological phases and analytic expressions of the Z2 and Z4 topological invariants. The half-lattice translation with Z2 spin flip and glide symmetry are compatible with the existence of boundaries, leading to topological surface gapless modes protected by the order-two nonsymmorphic symmetries. We also discuss unique features of these gapless surface modes.

  11. Inelastic Electron Tunneling Spectroscopy for Topological Insulators

    Science.gov (United States)

    She, Jian-Huang; Fransson, Jonas; Bishop, A. R.; Balatsky, Alexander V.

    2013-01-01

    Inelastic electron tunneling spectroscopy is a powerful spectroscopy that allows one to investigate the nature of local excitations and energy transfer in the system of interest. We study inelastic electron tunneling spectroscopy for topological insulators and investigate the role of inelastic scattering on the Dirac node states on the surface of topological insulators. Local inelastic scattering is shown to significantly modify the Dirac node spectrum. In the weak coupling limit, peaks and steps are induced in second derivative d2I/dV2. In the strong coupling limit, the local negative-U centers are formed at impurity sites, and the Dirac cone structure is fully destroyed locally. At intermediate coupling, resonance peaks emerge. We map out the evolution of the resonance peaks from weak to strong coupling, which interpolate nicely between the two limits. There is a sudden qualitative change of behavior at intermediate coupling, indicating the possible existence of a local quantum phase transition. We also find that, even for a simple local phonon mode, the inherent coupling of spin and orbital degrees in topological insulators leads to the spin-polarized texture in inelastic Friedel oscillations induced by the local mode.

  12. Experimentelle erzeugung der immun. Insulitis bei mausen

    Directory of Open Access Journals (Sweden)

    Okada,Soji

    1976-04-01

    Full Text Available Experimentelle Produktion der Immun-Insu1itis wurde aufgrund der aktiven Immunisierung der Mause vom dd-Stamm durch wiederholte Gabe vom rekristallisierten Rinderinsulin im Abstand von 4 Wochen unternommen. Wahrend der Zeitdauer vom 3. Tag bis zur 28. Woche nach der ersten Sensibilisierung wurden serologische sowie histo1ogische Untersuchungen an diesen Tieren vorgenommen. Dabei ergaben sich fo1gende Befunde: (1 Die Immunlnsulitis kam bei allen von 58 Fallen bis zu 16 Wochen nach dem Sensibilisierungsbeginn nicht zur Erscheinung, und trat bei 2 von 8 Fallen erst in der 20. Woche und dann bei 3 von 8 Fallen in der 28. Woche in die Erscheinung. (2 Kein signifikanter Unterschied bestand in Hinsicht des insulinverbindenden Antikorpertiters im Blut zwischen den Fallen mit und ohne Immun-Insulitis in der 20. Woche sowie in der 28. Woche. (3 1m Zeitlauf gab es aber eine gute Koinzidenz zwischen der Entstehung der Immun-Insulitis und der Herabsetzung des Antikorpertiters im Blut. (4 Untersuchungen des Pankreas mit Hi1fe der direkten Fluoreszenz-Antikorpermethode ergaben keine erkennbare spezifische Fluoreszenz innerhalb der Langerhansschen Inseln. Diese Untersuchungsergebnisse liefern der Ansicht einen Beweis, da~ die Insulitis, die fUr den mensch1ichen Diabetes mellitus spezifisch ist, mindestens zum Teil durch einen immuno1ogischen Mechanismus entstehen konnte.

  13. Thermal conductivity of a new insulator

    Energy Technology Data Exchange (ETDEWEB)

    Payamara, Jahangir [Physics Department, Shahed University (Iran, Islamic Republic of)], E-mail: jahangirpayamara@yahoo.com

    2011-07-01

    With the depletion of energy resources it becomes increasingly important to save energy. Significant amounts of energy are consumed in residential and commercial buildings, mainly for space heating. The aim of this paper is to assess the thermal conductivity of gunny, a new insulator produced in the Middle East and Far East from plant fiber. An insulation chamber of 0.75x0.6x1m3 was built in the physics department of Shahed University and measurements of the thermal conductivity of gunny were carried out. The thermal conductivity of gunny was found to be 0.80 joules per second meter degree celsius which is good in comparison to wood's thermal conductivity. In addition, results showed that the rate of heat energy hitting the cooler end is lower than that reaching the hot end and that gunny leads to energy savings in buildings. This study demonstrated that gunny can be considered a desirable insulator for buildings.

  14. Humidity effects on wire insulation breakdown strength.

    Energy Technology Data Exchange (ETDEWEB)

    Appelhans, Leah

    2013-08-01

    Methods for the testing of the dielectric breakdown strength of insulation on metal wires under variable humidity conditions were developed. Two methods, an ASTM method and the twisted pair method, were compared to determine if the twisted pair method could be used for determination of breakdown strength under variable humidity conditions. It was concluded that, although there were small differences in outcomes between the two testing methods, the non-standard method (twisted pair) would be appropriate to use for further testing of the effects of humidity on breakdown performance. The dielectric breakdown strength of 34G copper wire insulated with double layer Poly-Thermaleze/Polyamide-imide insulation was measured using the twisted pair method under a variety of relative humidity (RH) conditions and exposure times. Humidity at 50% RH and below was not found to affect the dielectric breakdown strength. At 80% RH the dielectric breakdown strength was significantly diminished. No effect for exposure time up to 140 hours was observed at 50 or 80%RH.

  15. Improvement of Reusable Surface Insulation (RSI) materials

    Science.gov (United States)

    Blome, J. C.

    1972-01-01

    The mullite fiber based hardened compacted fibers (HCF) type of reusable surface insulation was further developed for use in the Space Shuttle Program. Two hundred fifty formulations of fiber mixtures, fillers, binders, and organic processing aids were made using mullite fibers as the basic ingredient. Most of the work was accomplished on 15-lb/cu ft material. It was established that higher density materials are stronger with strength values as high as 250 lb/sq in. in tension. New measurement techniques and equipment were developed for accurate determination of strength and strain to failure. Room temperature to 2300 F stress-strain relationships were made. The room temperature tensile modulus of elasticity is 61,700 lb/sq in. and the strain at failure is 0.165 percent, typically, when measured longitudinally parallel to the long axes of the fibers. Thermal insulating effectiveness was increased 20 percent by reducing the diameter of some of the fibers in the material. Improvements were made in density uniformity and strength uniformity in a block of HCF by mixing improvements and by the use of organic additives. Specifications were established on the materials and processes used in making the insulation.

  16. Topological crystalline insulator SnTe nanoribbons

    Science.gov (United States)

    Dahal, Bishnu R.; Dulal, Rajendra P.; Pegg, Ian L.; Philip, John

    2017-03-01

    Topological crystalline insulators are systems in which a band inversion that is protected by crystalline mirror symmetry gives rise to nontrivial topological surface states. SnTe is a topological crystalline insulator. It exhibits p-type conductivity due to Sn vacancies and Te antisites, which leads to high carrier density in the bulk. Thus growth of high quality SnTe is a prerequisite for understanding the topological crystalline insulating behavior. We have grown SnTe nanoribbons using a solution method. The width of the SnTe ribbons varies from 500 nm to 2 μm. They exhibit rock salt crystal structure with a lattice parameter of 6.32 Å. The solution method that we have adapted uses low temperature, so the Sn vacancies can be controlled. The solution grown SnTe nanoribbons exhibit strong semiconducting behavior with an activation energy of 240 meV. This activation energy matches with the calculated band gap for SnTe with a lattice parameter of 6.32 Å, which is higher than that reported for bulk SnTe. The higher activation energy makes the thermal excitation of bulk charges very difficult on the surface. As a result, the topological surfaces will be free from the disturbance caused by the thermal excitations

  17. Surface Plasmons in 3D Topological Insulators

    Science.gov (United States)

    Kogar, Anshul; Vig, Sean; Cho, Gil; Thaler, Alexander; Xiao, Yiran; Hughes, Taylor; Wong, Man-Hong; Chiang, Tai-Chang; MacDougall, Greg; Abbamonte, Peter

    2015-03-01

    Most studies of three-dimensional (3D) topological insulators have concentrated on their one-electron properties as exhibited by angle-resolved photoemission spectroscopy (ARPES) or by scanning tunneling microscopy (STM). Many-body interactions are often neglected in the treatment of models of topological insulators, such as in the Kane-Mele and Bernevig-Hughes-Zhang models. Using angle-resolved inelastic electron scattering from the surface, I will present data on the collective mode that owes its existence to the presence of many-body interactions, the surface plasmon (SP), in two known 3D topological insulators, Bi2Se3 and Bi0.5Sb1.5Se1 . 5 + xTe1 . 5 - x. Surprisingly, the SP was prominent even after depressing the Fermi energy into the bulk band gap. Having studied the SP as a function of doping, momentum transfer and its aging properties, I will present evidence to suggest that bulk-surface coupling is crucial in explaining many of its properties. A simple model with dynamic bulk screening will be presented showing qualitative agreement with the observations. Lastly, the relation of the observed surface plasmon to the predicted spin-plasmon mode and to the kinks seen in the electronic dispersion as measured by ARPES will be discussed. The work was supported as part of the Center for Emergent Superconductivity, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science.

  18. The Idefix enhancer-blocking insulator also harbors barrier activity.

    Science.gov (United States)

    Brasset, E; Hermant, C; Jensen, S; Vaury, C

    2010-01-15

    Chromatin insulators are cis-regulatory sequences participating in the regulation of gene expression. Their presence within the genome is associated with two main functions. One of them is an enhancer-blocking function that blocks enhancer-promoter communication when the insulator is located in between. The second is a boundary or barrier function that insulates independent units of transcription. This latter is observed when two insulators flanking a gene and its regulatory sequences block the regulatory influences of surrounding chromatin. Some years ago, we reported the presence of an insulator within the retrotransposon Idefix from Drosophila melanogaster. This insulator displays an enhancer-blocking activity toward an enhancer located within a second retrotransposon called ZAM. Here, we show that this insulator is not specific to the ZAM enhancer but has the capacity to interfere in the communication established between a broad range of cis-regulatory enhancer and a promoter. Furthermore, we show that, if it is placed on both sides of a transgene, this insulator acts as a barrier able to isolate the transgene from its repressive or enhancing environment. Thus, the Idefix insulator carries both an enhancer-blocking and a barrier activity. According to these properties, the Idefix insulator might prove to be a useful tool to isolate artificial transgenes from positive or negative influences from their integration sites.

  19. MIR retrotransposon sequences provide insulators to the human genome.

    Science.gov (United States)

    Wang, Jianrong; Vicente-García, Cristina; Seruggia, Davide; Moltó, Eduardo; Fernandez-Miñán, Ana; Neto, Ana; Lee, Elbert; Gómez-Skarmeta, José Luis; Montoliu, Lluís; Lunyak, Victoria V; Jordan, I King

    2015-08-11

    Insulators are regulatory elements that help to organize eukaryotic chromatin via enhancer-blocking and chromatin barrier activity. Although there are several examples of transposable element (TE)-derived insulators, the contribution of TEs to human insulators has not been systematically explored. Mammalian-wide interspersed repeats (MIRs) are a conserved family of TEs that have substantial regulatory capacity and share sequence characteristics with tRNA-related insulators. We sought to evaluate whether MIRs can serve as insulators in the human genome. We applied a bioinformatic screen using genome sequence and functional genomic data from CD4(+) T cells to identify a set of 1,178 predicted MIR insulators genome-wide. These predicted MIR insulators were computationally tested to serve as chromatin barriers and regulators of gene expression in CD4(+) T cells. The activity of predicted MIR insulators was experimentally validated using in vitro and in vivo enhancer-blocking assays. MIR insulators are enriched around genes of the T-cell receptor pathway and reside at T-cell-specific boundaries of repressive and active chromatin. A total of 58% of the MIR insulators predicted here show evidence of T-cell-specific chromatin barrier and gene regulatory activity. MIR insulators appear to be CCCTC-binding factor (CTCF) independent and show a distinct local chromatin environment with marked peaks for RNA Pol III and a number of histone modifications, suggesting that MIR insulators recruit transcriptional complexes and chromatin modifying enzymes in situ to help establish chromatin and regulatory domains in the human genome. The provisioning of insulators by MIRs across the human genome suggests a specific mechanism by which TE sequences can be used to modulate gene regulatory networks.

  20. Superconductor-insulator transition in La2 - xSrxCuO4 at the pair quantum resistance.

    Science.gov (United States)

    Bollinger, A T; Dubuis, G; Yoon, J; Pavuna, D; Misewich, J; Božović, I

    2011-04-28

    High-temperature superconductivity in copper oxides arises when a parent insulator compound is doped beyond some critical concentration; what exactly happens at this superconductor-insulator transition is a key open question. The cleanest approach is to tune the carrier density using the electric field effect; for example, it was learned in this way that weak electron localization transforms superconducting SrTiO(3) into a Fermi-glass insulator. But in the copper oxides this has been a long-standing technical challenge, because perfect ultrathin films and huge local fields (>10(9) V m(-1)) are needed. Recently, such fields have been obtained using electrolytes or ionic liquids in the electric double-layer transistor configuration. Here we report synthesis of epitaxial films of La(2- x)Sr(x)CuO(4) that are one unit cell thick, and fabrication of double-layer transistors. Very large fields and induced changes in surface carrier density enable shifts in the critical temperature by up to 30 K. Hundreds of resistance versus temperature and carrier density curves were recorded and shown to collapse onto a single function, as predicted for a two-dimensional superconductor-insulator transition. The observed critical resistance is precisely the quantum resistance for pairs, R(Q) = h/(2e) = 6.45 kΩ, suggestive of a phase transition driven by quantum phase fluctuations, and Cooper pair (de)localization.

  1. Superconductor-insulator Transition in La2-xSrxCuO4 at the Pair Quantum Resistance

    Energy Technology Data Exchange (ETDEWEB)

    Bollinger, A.T.; Dubuis, G.; Yoon, J.; Pavuna, D.; Misewich, J.; Bozovic, I.

    2011-04-28

    High-temperature superconductivity in copper oxides arises when a parent insulator compound is doped beyond some critical concentration; what exactly happens at this superconductor-insulator transition is a key open question. The cleanest approach is to tune the carrier density using the electric field effect; for example, it was learned in this way that weak electron localization transforms superconducting SrTiO{sub 3} into a Fermi-glass insulator. But in the copper oxides this has been a long-standing technical challenge, because perfect ultrathin films and huge local fields (>10{sup 9} Vm{sup -1}) are needed. Recently, such fields have been obtained using electrolytes or ionic liquids in the electric double-layer transistor configuration. Here we report synthesis of epitaxial films of La{sub 2-x}Sr{sub x}CuO{sub 4} that are one unit cell thick, and fabrication of double-layer transistors. Very large fields and induced changes in surface carrier density enable shifts in the critical temperature by up to 30 K. Hundreds of resistance versus temperature and carrier density curves were recorded and shown to collapse onto a single function, as predicted for a two-dimensional superconductor-insulator transition. The observed critical resistance is precisely the quantum resistance for pairs, R{sub Q} = h/(2e) = 6.45 k{Omega}, suggestive of a phase transition driven by quantum phase fluctuations, and Cooper pair (de)localization.

  2. Self-assembled monolayers on metal oxides : applications in nanotechnology

    NARCIS (Netherlands)

    Yildirim, O.

    2010-01-01

    The thesis describes the use of phosph(on)ate-based self-assembled monolayers (SAMs) to modify and pattern metal oxides. Metal oxides have interesting electronic and magnetic properties such as insulating, semiconducting, metallic, ferromagnetic etc. and SAMs can tailor the surface properties. FePt

  3. Tunneling of quasiparticles in the normal-insulator-superconductor-insulator-normal geometry

    Science.gov (United States)

    Hidaka, Mutsuo; Ishizaka, Satoshi; Sone, Jun'ichi

    1993-12-01

    The probability of quasiparticle transmission going through a normal-insulator- superconductor-insulator-normal (NISIN) geometry is theoretically calculated using Bogoliubov-de Gennes equations to investigate the feasibility of electron devices utilizing this geometry. This new calculation is able to include a current carried by Cooper pairs by employing hole injections from the outlet which destroy Cooper pairs at the outlet super- conductor-insulator boundary. Resonant tunneling phenomena occur even if the electron kinetic energy is less than the superconducting energy gap and electron tunneling probabilities are greatly modified by the resonance. When the unevenness of the superconductor (S) width thickness is large compared with the electron wavelength in the S layer, the resonance is smeared out in averaged tunneling probabilities. Then the tunneling probabilities can be controlled by the electron kinetic energy. Applications of the NISIN geometry for superconducting transistors are also discussed.

  4. Insulation system in an integrated motor compressor

    Energy Technology Data Exchange (ETDEWEB)

    Sihvo, V.

    2010-07-01

    A high-speed and high-voltage solid-rotor induction machine provides beneficial features for natural gas compressor technology. The mechanical robustness of the machine enables its use in an integrated motor-compressor. The technology uses a centrifugal compressor, which is mounted on the same shaft with the high-speed electrical machine driving it. No gearbox is needed as the speed is determined by the frequency converter. The cooling is provided by the process gas, which flows through the motor and is capable of transferring the heat away from the motor. The technology has been used in the compressors in the natural gas supply chain in the central Europe. New areas of application include natural gas compressors working at the wellheads of the subsea gas reservoir. A key challenge for the design of such a motor is the resistance of the stator insulation to the raw natural gas from the well. The gas contains water and heavy hydrocarbon compounds and it is far harsher than the sales gas in the natural gas supply network. The objective of this doctoral thesis is to discuss the resistance of the insulation to the raw natural gas and the phenomena degrading the insulation. The presence of partial discharges is analyzed in this doctoral dissertation. The breakdown voltage of the gas is measured as a function of pressure and gap distance. The partial discharge activity is measured on small samples representing the windings of the machine. The electrical field behavior is also modeled by finite element methods. Based on the measurements it has been concluded that the discharges are expected to disappear at gas pressures above 4 - 5 bar. The disappearance of discharges is caused by the breakdown strength of the gas, which increases as the pressure increases. Based on the finite element analysis, the physical length of a discharge seen in the PD measurements at atmospheric pressure was approximated to be 40 - 120 mum. The chemical aging of the insulation when exposed to raw

  5. Cryogenic Insulation Standard Data and Methodologies Project

    Science.gov (United States)

    Summerfield, Burton; Thompson, Karen; Zeitlin, Nancy; Mullenix, Pamela; Fesmire, James; Swanger, Adam

    2015-01-01

    Extending some recent developments in the area of technical consensus standards for cryogenic thermal insulation systems, a preliminary Inter-Laboratory Study of foam insulation materials was performed by NASA Kennedy Space Center and LeTourneau University. The initial focus was ambient pressure cryogenic boil off testing using the Cryostat-400 flat-plate instrument. Completion of a test facility at LETU has enabled direct, comparative testing, using identical cryostat instruments and methods, and the production of standard thermal data sets for a number of materials under sub-ambient conditions. The two sets of measurements were analyzed and indicate there is reasonable agreement between the two laboratories. Based on cryogenic boiloff calorimetry, new equipment and methods for testing thermal insulation systems have been successfully developed. These boiloff instruments (or cryostats) include both flat plate and cylindrical models and are applicable to a wide range of different materials under a wide range of test conditions. Test measurements are generally made at large temperature difference (boundary temperatures of 293 K and 78 K are typical) and include the full vacuum pressure range. Results are generally reported in effective thermal conductivity (ke) and mean heat flux (q) through the insulation system. The new cryostat instruments provide an effective and reliable way to characterize the thermal performance of materials under subambient conditions. Proven in through thousands of tests of hundreds of material systems, they have supported a wide range of aerospace, industry, and research projects. Boiloff testing technology is not just for cryogenic testing but is a cost effective, field-representative methodology to test any material or system for applications at sub-ambient temperatures. This technology, when adequately coupled with a technical standards basis, can provide a cost-effective, field-representative methodology to test any material or system

  6. Thermal insulation attaching means. [adhesive bonding of felt vibration insulators under ceramic tiles

    Science.gov (United States)

    Leger, L. J. (Inventor)

    1978-01-01

    An improved isolation system is provided for attaching ceramic tiles of insulating material to the surface of a structure to be protected against extreme temperatures of the nature expected to be encountered by the space shuttle orbiter. This system isolates the fragile ceramic tiles from thermally and mechanically induced vehicle structural strains. The insulating tiles are affixed to a felt isolation pad formed of closely arranged and randomly oriented fibers by means of a flexible adhesive and in turn the felt pad is affixed to the metallic vehicle structure by an additional layer of flexible adhesive.

  7. Spin Seebeck effect in insulating epitaxial γ−Fe2O3 thin films

    Directory of Open Access Journals (Sweden)

    P. Jiménez-Cavero

    2017-02-01

    Full Text Available We report the fabrication of high crystal quality epitaxial thin films of maghemite (γ−Fe2O3, a classic ferrimagnetic insulating iron oxide. Spin Seebeck effect (SSE measurements in γ−Fe2O3/Pt bilayers as a function of sample preparation conditions and temperature yield a SSE coefficient of 0.5(1 μV/K at room temperature. Dependence on temperature allows us to estimate the magnon diffusion length in maghemite to be in the range of tens of nanometers, in good agreement with that of conducting iron oxide magnetite (Fe3O4, establishing the relevance of spin currents of magnonic origin in magnetic iron oxides.

  8. Experimental evidence for a two-dimensional quantized Hall insulator

    Science.gov (United States)

    Hilke, M.; Shahar, D.; Song, S. H.; Tsui, D. C.; Xie, Y. H.; Monroe, Don

    1998-10-01

    The general theoretical definition of an insulator is a material in which the conductivity vanishes at the absolute zero of temperature. In classical insulators, such as materials with a band gap, vanishing conductivities lead to diverging resistivities. But other insulators can show more complex behaviour, particularly in the presence of a high magnetic field, where different components of the resistivity tensor can display different behaviours: the magnetoresistance diverges as the temperature approaches absolute zero, but the transverse (Hall) resistance remains finite. Such a system is known as a Hall insulator. Here we report experimental evidence for a quantized Hall insulator in a two-dimensional electron system-confined in a semiconductor quantum well. The Hall resistance is quantized in the quantum unit of resistance h/e2, where h is Planck's constant and e the electronic charge. At low fields, the sample reverts to being a normal Hall insulator.

  9. Effects of Absolute Humidity on Flashover Voltage of Insulators

    Science.gov (United States)

    Fujii, Osamu; Hidaka, Kazuhiro; Mizuno, Yukio; Naito, Katsuhiko; Irie, Takashi; Nishikawa, Morio

    Effect of humidity on flashover voltage of three kinds of insulators is experimentally studied for about three years under natural humidity condition. It is found that the existing IEC humidity correction seems to be proper for most insulators regardless of the kinds of applied voltage but that change may be necessary for a cap and pin insulator unit under the application of positive and negative lightning impulse voltages.

  10. A scheme for a topological insulator field effect transistor

    Science.gov (United States)

    Vali, Mehran; Dideban, Daryoosh; Moezi, Negin

    2015-05-01

    We propose a scheme for a topological insulator field effect transistor. The idea is based on the gate voltage control of the Dirac fermions in a ferromagnetic topological insulator channel with perpendicular magnetization connecting to two metallic topological insulator leads. Our theoretical analysis shows that the proposed device displays a switching effect with high on/off current ratio and a negative differential conductance with a good peak to valley ratio.

  11. Compact gas-insulated transformer. Fourteenth quarterly report

    Energy Technology Data Exchange (ETDEWEB)

    1983-08-01

    Objective is to develop a compact, more efficient, quieter transformer which does not rely on mineral oil insulation. Compressed SF/sub 6/ is used as the external insulation and polymer film as the insulation between turns. A separate liquid cooling system is also provided. This document reports progress made in design, mechanical, dielectric, short circuit, thermal, materials, prototype, accessories, commercialization, and system studies. (DLC)

  12. Thermal-Insulation Properties of Multilayer Textile Packages

    OpenAIRE

    Matusiak Małgorzata; Kowalczyk Sylwia

    2014-01-01

    Thermal-insulation properties of textile materials play a significant role in material engineering of protective clothing. Thermal-insulation properties are very important from the point of view of thermal comfort of the clothing user as well as the protective efficiency against low or high temperature. Thermal protective clothing usually is a multilayer construction. Its thermal insulation is a resultant of a number of layers and their order, as well as the thermalinsulation properties of a ...

  13. Degradation mechanisms of cable insulation materials during radiation-thermal ageing in radiation environment

    Science.gov (United States)

    Seguchi, Tadao; Tamura, Kiyotoshi; Ohshima, Takeshi; Shimada, Akihiko; Kudoh, Hisaaki

    2011-02-01

    Radiation and thermal degradation of ethylene-propylene rubber (EPR) and crosslinked polyethylene (XLPE) as cable insulation materials were investigated by evaluating tensile properties, gel-fraction, and swelling ratio, as well as by the infrared (FTIR) analysis. The activation energy of thermal oxidative degradation changed over the range 100-120 °C for both EPR and XLPE. This may be attributed to the fact that the content of an antioxidant used as the stabilizer for polymers decreases by evaporation during thermal ageing at high temperatures. The analysis of antioxidant content and oxidative products in XLPE as a model sample showed that a small amount of antioxidant significantly reduced the extent of thermal oxidation, but was not effective for radiation induced oxidation. The changes in mechanical properties were well reflected by the degree of oxidation. A new model of polymer degradation mechanisms was proposed where the degradation does not take place by chain reaction via peroxy radical and hydro-peroxide. The role of the antioxidant in the polymer is the reduction of free radical formation in the initiation step in thermal oxidation, and it could not stop radical reactions for either radiation or thermal oxidation.

  14. Degradation mechanisms of cable insulation materials during radiation-thermal ageing in radiation environment

    Energy Technology Data Exchange (ETDEWEB)

    Seguchi, Tadao, E-mail: seguchi@aj.wakwak.co [Japan Atomic Energy Agency, Tokai 319-1195 (Japan); Tamura, Kiyotoshi; Ohshima, Takeshi; Shimada, Akihiko [Japan Atomic Energy Agency, Tokai 319-1195 (Japan); Kudoh, Hisaaki [University of Tokyo, Tokai 319-1195 (Japan)

    2011-02-15

    Radiation and thermal degradation of ethylene-propylene rubber (EPR) and crosslinked polyethylene (XLPE) as cable insulation materials were investigated by evaluating tensile properties, gel-fraction, and swelling ratio, as well as by the infrared (FTIR) analysis. The activation energy of thermal oxidative degradation changed over the range 100-120 {sup o}C for both EPR and XLPE. This may be attributed to the fact that the content of an antioxidant used as the stabilizer for polymers decreases by evaporation during thermal ageing at high temperatures. The analysis of antioxidant content and oxidative products in XLPE as a model sample showed that a small amount of antioxidant significantly reduced the extent of thermal oxidation, but was not effective for radiation induced oxidation. The changes in mechanical properties were well reflected by the degree of oxidation. A new model of polymer degradation mechanisms was proposed where the degradation does not take place by chain reaction via peroxy radical and hydro-peroxide. The role of the antioxidant in the polymer is the reduction of free radical formation in the initiation step in thermal oxidation, and it could not stop radical reactions for either radiation or thermal oxidation.

  15. Ormosil Beads for Insulation of Ground Cryogenic Storage Tanks Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Organically modified silica (Ormosil) aerogel beads developed at Aspen Aerogels, Inc. offer several advantages for retrofitting perlite insulation in NASA's ground...

  16. The impact of added insulation on air leakage

    Energy Technology Data Exchange (ETDEWEB)

    Anon

    2002-01-01

    It is relatively easy to calculate the impact on energy consumption when thermal insulation is added to the building envelope. However, other effects such as air leakage through the exterior wall assembly, and the potential for water condensation also have to be considered. By adding insulation to the exterior wall assembly, the temperature gradient of the wall is changed and the risk of condensation is increased, especially if warm, moist indoor air can flow through the wall. The study by Dominique Derome, Paul Fazio and Guylaine Desmarais for the CMHC Research Division, of which this paper is a summary, examined three types of air leakage paths, i.e. long air exfiltration path; concentrated air exfiltration path; and distributed exfiltration path. Experiments involved placing 38 mm rigid extruded polystyrene insulation on the interior side of three wood studs and fiberglass batt insulation wall assemblies, while four other samples had the same 38 mm rigid extruded polystyrene insulation added on the exterior of the assembly over the fiberboard sheathing. Both, warm and cold side additions of rigid foam insulation to the existing assemblies increased thermal performance by 55 per cent. When blown cellulose fibre was used as insulation instead of fibreglass batting, the increase in thermal performance was 66 per cent. Addition of the rigid foam insulation on the warm side tended to increase the effectiveness. For example, moisture content generally did not rise above 25 per cent, whereas it could climb up to 70 per cent when the insulation was added on the cold side.

  17. Transport properties of topological insulators films and nanowires

    Institute of Scientific and Technical Information of China (English)

    Liu Yi; Ma Zheng; Zhao Yan-Fei; Meenakshi Singh; Wang Jian

    2013-01-01

    The last several years have witnessed the rapid developments in the study and understanding of topological insulators.In this review,after a brief summary of the history of topological insulators,we focus on the recent progress made in transport experiments on topological insulator films and nanowires.Some quantum phenomena,including the weak antilocalization,the Aharonov-Bohm effect,and the Shubnikov-de Haas oscillations,observed in these nanostructures are described.In addition,the electronic transport evidence of the superconducting proximity effect as well as an anomalous resistance enhancement in topological insulator/superconductor hybrid structures is included.

  18. Highly Flexible and Extremely Durable Polyimide Cryogenic Insulation Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed innovative insulation would greatly enhance the usability of, and reduce the inherent losses associated with, cryogenic fuel delivery and storage...

  19. Thermo-Insulation Properties Of Hemp-Based Products

    Directory of Open Access Journals (Sweden)

    Lekavicius V.

    2015-02-01

    Full Text Available As known, many multi-purpose plants can be used in different industries. This research is focused on the possibilities to utilize hemp as feedstock for thermal insulation products. The most advantageous features of hemp insulation are associated with health and environmental safety. The thermal conductivity of commercially available hemp insulation products is comparable with that of other fibrous insulation materials; however, it is possible to develop new products that could be more efficient in terms of cost and due to other important features.

  20. Thermo-Insulation Properties Of Hemp-Based Products

    Science.gov (United States)

    Lekavicius, V.; Shipkovs, P.; Ivanovs, S.; Rucins, A.

    2015-02-01

    As known, many multi-purpose plants can be used in different industries. This research is focused on the possibilities to utilize hemp as feedstock for thermal insulation products. The most advantageous features of hemp insulation are associated with health and environmental safety. The thermal conductivity of commercially available hemp insulation products is comparable with that of other fibrous insulation materials; however, it is possible to develop new products that could be more efficient in terms of cost and due to other important features.

  1. Crossover from Incoherent to Coherent Phonon Scattering in Epitaxial Oxide Superlattices

    Science.gov (United States)

    2013-12-08

    of the superlattices. Figure 3a shows a high-resolution, short-angular-range θ–2θ X - ray diffraction (XRD) scan of a (STO)6/(CTO)6 superlattice...function of interface density. We do so by synthesizing superlattices of electrically insulating perovskite oxides 1. REPORT DATE (DD-MM-YYYY) 4. TITLE...synthesizing superlattices of electrically insulating perovskite oxides and systematically varying the interface density, with unit-cell precision, using two

  2. Corrosion of Copper and Oxidation of Dielectric Liquids in High Voltage Transformers

    OpenAIRE

    Tronstad, Ingvild

    2013-01-01

    Breakdowns in high voltage transformers are of major concern. It is therefore a goal to prevent this from happening. Chemical degradation (e.g. oxidation, hydrolysis and corrosion) of the insulation systems and windings and formation of deposits are some of the most important causes of breakdowns in oil-paper insulated transformers.Several of the methods for studying the oxidation stability of dielectric liquids are time consuming and involve harsh conditions, far from the conditions in the t...

  3. Fibrous-Ceramic/Aerogel Composite Insulating Tiles

    Science.gov (United States)

    White, Susan M.; Rasky, Daniel J.

    2004-01-01

    Fibrous-ceramic/aerogel composite tiles have been invented to afford combinations of thermal-insulation and mechanical properties superior to those attainable by making tiles of fibrous ceramics alone or aerogels alone. These lightweight tiles can be tailored to a variety of applications that range from insulating cryogenic tanks to protecting spacecraft against re-entry heating. The advantages and disadvantages of fibrous ceramics and aerogels can be summarized as follows: Tiles made of ceramic fibers are known for mechanical strength, toughness, and machinability. Fibrous ceramic tiles are highly effective as thermal insulators in a vacuum. However, undesirably, the porosity of these materials makes them permeable by gases, so that in the presence of air or other gases, convection and gas-phase conduction contribute to the effective thermal conductivity of the tiles. Other disadvantages of the porosity and permeability of fibrous ceramic tiles arise because gases (e.g., water vapor or cryogenic gases) can condense in pores. This condensation contributes to weight, and in the case of cryogenic systems, the heat of condensation undesirably adds to the heat flowing to the objects that one seeks to keep cold. Moreover, there is a risk of explosion associated with vaporization of previously condensed gas upon reheating. Aerogels offer low permeability, low density, and low thermal conductivity, but are mechanically fragile. The basic idea of the present invention is to exploit the best features of fibrous ceramic tiles and aerogels. In a composite tile according to the invention, the fibrous ceramic serves as a matrix that mechanically supports the aerogel, while the aerogel serves as a low-conductivity, low-permeability filling that closes what would otherwise be the open pores of the fibrous ceramic. Because the aerogel eliminates or at least suppresses permeation by gas, gas-phase conduction, and convection, the thermal conductivity of such a composite even at

  4. Holographic Metals and Insulators with Helical Symmetry

    CERN Document Server

    Donos, Aristomenis; Kiritsis, Elias

    2014-01-01

    Homogeneous, zero temperature scaling solutions with Bianchi VII spatial geometry are constructed in Einstein-Maxwell-Dilaton theory. They correspond to quantum critical saddle points with helical symmetry at finite density. Assuming $AdS_{5}$ UV asymptotics, the small frequency/(temperature) dependence of the AC/(DC) electric conductivity along the director of the helix are computed. A large class of insulating and conducting anisotropic phases is found, as well as isotropic, metallic phases. Conduction can be dominated by dissipation due to weak breaking of translation symmetry or by a quantum critical current.

  5. Sound insulation requirements in the Nordic countries

    DEFF Research Database (Denmark)

    Rasmussen, Birgit

    All Nordic countries have sound insulation requirements for housing and sound classification schemes originating from a common INSTA‐proposal in the mid 90’s, but unfortunately being increasingly diversified since then. The present situation impedes development and create barriers for trade...... and exchange of experience at a time, where cooperation is needed more than before due to the challenges related to defining appropriate acoustic requirements for comfortable light‐weight housing. There seems be a high interest for all parties involved in the building process to change the situation. Examples...

  6. Carbon nanofillers for machining insulating ceramics

    Directory of Open Access Journals (Sweden)

    Olivier Malek

    2011-10-01

    Full Text Available The implementation of ceramics in emerging applications is principally limited by the final machining process necessary for producing microcomponents with complex geometries. The addition of carbon nanotubes greatly enhances the electrical properties of insulating ceramics allowing electrical discharge machining to be used to manufacture intricate parts. Meanwhile other properties of the ceramic may be either preserved or even improved. For the first time, a silicon nitride/carbon nanotubes microgear is electrically discharge machined with a remarkably high material removal rate, low surface roughness, and low tool wear. This offers unprecedented opportunities for the manufacture of complicated ceramic parts by adding carbon nanotubes for new engineering and biomedical applications.

  7. Interfaces in coexisting metals and Mott insulators

    Science.gov (United States)

    Lee, Juho; Yee, Chuck-Hou

    2017-05-01

    Motivated by the direct observation of electronic phase separation in first-order Mott transitions, we model the interface between thermodynamically coexisting metals and Mott insulators. We show how to model the required slab geometry and extract the electronic spectra. We construct an effective Landau free energy and compute the variation of its parameters across the phase diagram. Finally, using a linear mixture of the density and double occupancy, we identify a natural Ising order parameter which unifies the treatment of the bandwidth and filling controlled Mott transitions.

  8. Electrodynamic thermal breakdown of a capacitor insulator

    Science.gov (United States)

    Emel'Yanov, O. A.

    2011-11-01

    A mechanism of the electrical breakdown is proposed for modern metal-field capacitors with the well-known property of self-healing of the breakdown strength. Upon an increase in the working voltage, the self-healing time increases to tens of microseconds, and the heating of adjacent insulator layers becomes significant. The propagating thermally activated conduction wave facilitates the enhancement of the electric field up to breakdown values. Analysis of the dynamics of electric field increase is carried out for capacitors based on polyethylene terephthalate (PET) dielectric.

  9. Insulator to Metal Transition in Fluid Hydrogen

    Energy Technology Data Exchange (ETDEWEB)

    Hood, R Q; Galli, G

    2003-06-15

    The authors have investigated the insulator to metal transition (ITM) in fluid hydrogen using first principles simulations. Both density functional and quantum Monte Carlo calculations show that the electronic energy gap of the liquid vanishes at about 9 fold compression and 3000 K. At these conditions the computed conductivity values are characteristic of a poor metal. These findings are consistent with those of recent shock wave experiments but the computed conductivity is larger than the measured value. From the ab-initio results they conclude that the ITM is driven by molecular dissociation rather than disorder and that both temperature and pressure play a key role in determining structural changes in the fluid.

  10. Historical Review of VLF Insulator Tests.

    Science.gov (United States)

    1981-07-01

    13.0 HAIKU OMEGA ANTENNA HARDWARE TESTS 96 13.1 Obstruction Markers 96 13.2 Vibration Dampers 99 13.3 Other Tests for PME 119 and NCEL 100 14.0 SYNTHETIC...place on indefinite hold. 95 13.0 HAIKU OMEGA ANTENNA HARDWARE TESTS Although by mid-1974 the principal difficulties with the base insulated tower...station of nearly a comical nature. These mostly were unexpected occurrence of intense corona on the Haiku spans. Possible causes and cures were

  11. The infrared properties of reusable surface insulations.

    Science.gov (United States)

    Schmitt, R. J.; Linford, R. M. F.; Dillow, C. F.; Hughes, T. A.

    1973-01-01

    The total infrared scattering and absorption cross sections of both flexible and rigidized high temperature fibrous insulations have been measured. The methods for accomplishing these measurements are described. Infrared reflection and transmission spectra were obtained to study the dependence of the total cross sections on the spectral characteristics of the transported radiation. These results are applied to steady-state effective thermal conductivity measurements via a four-flux model of radiative heat transfer to separate the radiative component and to calculate the effective thermal conductivity under transient heating conditions. Data for both silica and mullite fibers are presented.

  12. Quantum anomalous Hall effect in magnetically modulated topological insulator/normal insulator heterostructures

    Science.gov (United States)

    Men'shov, V. N.; Tugushev, V. V.; Chulkov, E. V.

    2016-10-01

    We theoretically study how magnetic modulation can be used to manipulate the transport properties of heterostructures formed by a thin film of a three-dimensional topological insulator sandwiched between slabs of a normal insulator. Employing the k • p scheme, in the framework of a continual approach, we argue that electron states of the system are spin-polarized when ultrathin magnetic insertions are incorporated into the film. We demonstrate that (i) the spin-polarization magnitude depends strongly on the magnetic insertion position in the film and (ii) there is the optimal insertion position to realize quantum anomalous Hall effect, which is a function of the material parameters, the film thickness and the topological insulator/normal insulator interface potential. For the heterostructure with a pair of symmetrically placed magnetic insertions, we calculate a phase diagram that shows a series of transitions between distinct quantum regimes of transverse conductivity. We provide consistent interpretation of recent experimental findings in the context of our results.

  13. Impact of grounding and filtering on power insulation monitoring in insulated terrestrial power networks

    NARCIS (Netherlands)

    van Vugt, Pieter Karel Anton; Bijman, Rob; Timens, R.B.; Leferink, Frank Bernardus Johannes

    2013-01-01

    Insulated terrestrial power networks are used for reliable systems such as large production plants, hospital operating rooms and naval ships. The system is isolated from ground and a first fault, such as a short circuit between a phase and ground, will not result in disconnection of the power via

  14. Common test methods for insulating and sheathing materials of electrical cables - Part 4 Methods specific to polyethylene and polypropylene compounds. Section Two

    CERN Document Server

    International Electrotechnical Commission. Geneva

    1990-01-01

    Gives the methods for measurement of elongation at break after pre-conditioning, for wrapping test after pre-conditioning, for wraping test after thermal ageing in air, for measurement of mass increase, for long-term stability test and for measurement of copper-catalysed oxidative degradation, which apply to polyolefin insulations.

  15. Pulse quenching induced by multi-collection effects in 45 nm silicon-on-insulator technology

    Science.gov (United States)

    Artola, L.; Hubert, G.

    2016-12-01

    This paper presents the analysis of pulse quenching effects induced in silicon-on-insulator (SOI) technology. Simulation results emphasize the need to consider multi-collection effects in the occurrence mechanisms of single event transients (SET) in very large scaling integration (VLSI) components even with SOI technologies, which is known to be initially less sensitive to soft errors (SE). The impacts of gate-to-gate spacing and voltage scaling on the SET occurrence and characteristics have been highlighted. The simulations have been performed with the soft error prediction tool MUSCA SEP3 developed for digital complementary metal oxide semiconductor (CMOS) technologies (SOI, Bulk).

  16. Electronic structure of ferromagnet-insulator interfaces: Fe/MgO and Co/MgO

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, M.

    2007-07-11

    In this thesis the electronic structure of Fe/MgO{sub x} and Co/MgO{sub x} ferromagnet-insulator interfaces, representing material systems which are widely used in magnetic tunnel junctions, is studied by means of spin- and angle-resolved photoemission spectroscopy. The photoemission studies focus particularly on the response of the ferromagnetic electronic system in contact with MgO of varying stoichiometries, as this reflects the mechanisms of metal-oxide bonding at real ferromagnet-insulator interfaces. The correlation between chemical bonding and electronic structure formation is analyzed by combining information from core- and valence-band photoemission spectroscopy. The spectral features are compared to band structure calculations, which are performed using the SPR-KKR method. The Fe/MgO and Co/MgO systems are prepared by molecular beam epitaxy under ultrahigh vacuum conditions on well-defined (4 x 6) GaAs(001) substrates. A structural analysis by means of low-energy electron diffraction (LEED) reveals their body-centered cubic crystalline structure, whereas the chemical characterization by Auger electron spectroscopy is used to quantify the chemical environment at the sample surfaces. The magnetic analysis, using the magneto-optical Kerr effect, reveals the uniaxial anisotropy of the ferromagnetic layers. A crucial parameter is given by the MgO degree of oxidation, which is addressed by means of core-level spectroscopy and quantified by suitable fitting procedures of the Mg 2p core level. The results of the photoemission experiments show, that the electronic structure of the Fe/MgO and Co/MgO ferromagnet/insulator interfaces and, consequently, the interfacial spin polarization are sensitively controlled by the interface chemistry. In particular, three distinct scenarios are identified: the nearly stoichiometric, the oxygen-deficient and the over-oxidized ferromagnet/MgO interface. Each case is defined by innate characteristics of the electronic structure at

  17. Effect of irradiation spectrum on the microstructural evolution in ceramic insulators

    Energy Technology Data Exchange (ETDEWEB)

    Zinkle, S.J. [Oak Ridge National Lab., TN (United States)

    1995-04-01

    The objective of this study is to determine and examine the effect of variations in the ionizing and displacive radiation environments on the microstructure of oxide ceramic insulators. Cross section transmission electron microscopy has been used to investigate the microstructure of MgAl{sub 2}O{sub 4} (spinel) and Al{sub 2}O{sub 3} (alumina) following irradiation with ions of varying mass and energy at room temperature and 650{degree}C. These results clearly indicate that light ion and electron irradiations produce microstructures which are not representative of the microstructure that would form in these ceramics during fission or fusion neutron irradiation.

  18. Development of 8-inch Key Processes for Insulated-Gate Bipolar Transistor

    Directory of Open Access Journals (Sweden)

    Guoyou Liu

    2015-09-01

    Full Text Available Based on the construction of the 8-inch fabrication line, advanced process technology of 8-inch wafer, as well as the fourth-generation high-voltage double-diffused metal-oxide semiconductor (DMOS+ insulated-gate bipolar transistor (IGBT technology and the fifth-generation trench gate IGBT technology, have been developed, realizing a great-leap forward technological development for the manufacturing of high-voltage IGBT from 6-inch to 8-inch. The 1600 A/1.7 kV and 1500 A/3.3 kV IGBT modules have been successfully fabricated, qualified, and applied in rail transportation traction system.

  19. New class of planar ferroelectric Mott insulators via first-principles design

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Chanul; Park, Hyowon; Marianetti, Chris A.

    2015-12-11

    which is not common in known materials. Here we use first-principles calculations to design layered double perovskite oxides AABBO6 which achieve the aforementioned properties in the context of Mott insulators. In our design rules, the gap is dictated by B/B electronegativity difference in a Mott state, while the polarization is obtained via nominal d0 filling on the B-site, A-type cations bearing lone-pair electrons, and A = A size mismatch. Successful execution is demonstrated in BaBiCuVO6, BaBiNiVO6, BaLaCuVO6, and PbLaCuVO6.

  20. Proximity effect between a ferromagnetic insulator and a superconductor

    Energy Technology Data Exchange (ETDEWEB)

    Wolf, Michael J.; Beckmann, Detlef [Karlsruher Institut fuer Technologie (KIT), Karlsruhe (Germany). Inst. fuer Nanotechnologie; Huebler, Florian [Karlsruher Institut fuer Technologie (KIT), Karlsruhe (Germany). Inst. fuer Nanotechnologie; Karlsruher Institut fuer Technologie (KIT), Karlsruhe (Germany). Inst. fuer Festkoerperphysik; Suergers, Christoph [Karlsruher Institut fuer Technologie (KIT), Karlsruhe (Germany). Physikalisches Inst.; Loehneysen, Hilbert von [Karlsruher Institut fuer Technologie (KIT), Karlsruhe (Germany). Inst. fuer Festkoerperphysik; Karlsruher Institut fuer Technologie (KIT), Karlsruhe (Germany). Physikalisches Inst.

    2012-07-01

    Electron transfer through spin-active interfaces can be modeled by the transmission amplitudes and a relative phase shift between spin-up and spin-down wavefunctions, the spin-mixing angle. Recently, Andreev bound states have been observed in F/S tunnel contacts which imply a non-zero spin-mixing angle of the ultrathin F/S barrier. In order to separate the spin-active interface from the detector tunnel contact, we have fabricated normal metal/superconductor tunnel contacts on top of a ferromagnetic insulator. We prepared EuS thin films (d{approx}20 nm) on top of Si(111) substrates by means of e-beam evaporation and created Al/Al-Oxide/Cu tunnel contacts by means of shadow evaporation. In an applied magnetic field, the tunnel spectra show an enhanced Zeeman splitting which is due to the presence of the exchange field of the EuS layer. Furthermore, we observe small peaks in the subgap region of the tunnel spectra which may be attributed to Andreev bound states due to a non-zero spin-mixing angle at the EuS/Al interface. The results suggest the use of EuS thin films for generating equal-spin triplet superconductivity.

  1. Insulated gate and surface passivation structures for GaN-based power transistors

    Science.gov (United States)

    Yatabe, Zenji; Asubar, Joel T.; Hashizume, Tamotsu

    2016-10-01

    Recent years have witnessed GaN-based devices delivering their promise of unprecedented power and frequency levels and demonstrating their capability as an able replacement for Si-based devices. High-electron-mobility transistors (HEMTs), a key representative architecture of GaN-based devices, are well-suited for high-power and high frequency device applications, owing to highly desirable III-nitride physical properties. However, these devices are still hounded by issues not previously encountered in their more established Si- and GaAs-based devices counterparts. Metal-insulator-semiconductor (MIS) structures are usually employed with varying degrees of success in sidestepping the major problematic issues such as excessive leakage current and current instability. While different insulator materials have been applied to GaN-based transistors, the properties of insulator/III-N interfaces are still not fully understood. This is mainly due to the difficulty of characterizing insulator/AlGaN interfaces in a MIS HEMT because of the two resulting interfaces: insulator/AlGaN and AlGaN/GaN, making the potential modulation rather complicated. Although there have been many reports of low interface-trap densities in HEMT MIS capacitors, several papers have incorrectly evaluated their capacitance-voltage (C-V) characteristics. A HEMT MIS structure typically shows a 2-step C-V behavior. However, several groups reported C-V curves without the characteristic step at the forward bias regime, which is likely to the high-density states at the insulator/AlGaN interface impeding the potential control of the AlGaN surface by the gate bias. In this review paper, first we describe critical issues and problems including leakage current, current collapse and threshold voltage instability in AlGaN/GaN HEMTs. Then we present interface properties, focusing on interface states, of GaN MIS systems using oxides, nitrides and high-κ dielectrics. Next, the properties of a variety of AlGaN/GaN MIS

  2. Electronic structure study of strongly correlated Mott-insulators

    Science.gov (United States)

    Yin, Quan

    Strongly correlated electronic systems have presented the most challenging problems to condensed matter theorists for many years and this continues to be the case. They are complicated materials with active d or f orbitals, whose valence electrons are in the intermediate region between itinerant (band-like) and highly localized (atomic-like) limits, which demand genuine many-body treatment. Although dealing with strongly correlated systems is a notorious problem, they have drawn broad interests of both theoretical and experimental condensed matter physicists, with intensive studies carried out in the past and present. This is due to the most exotic properties associated with strongly correlated materials, such as high-temperature superconductivity, metal-insulator transition, volume collapse, Kondo effect, colossal magnetoresistance, and many others. Although density functional theory (DFT) within local density approximation (LDA) is very successful in describing a wide range of materials, it encounters difficulty in predicting strongly correlated systems. Traditionally, they have been studied by model Hamiltonians with empirical parameters. The development of dynamical mean field theory (DMFT) and its marriage to DFT have brought new hope for first-principle study of strongly correlated systems. In this work, electronic structures of select strongly correlated systems are studied using LDA+DMFT. As theoretical backgrounds, reviews of DFT and DMFT are given in the first few chapters, where we also introduce the philosophy and workflow of LDA+DMFT. In the following chapters, applications to transition metal oxides, undoped high-temperature superconductors and actinide oxides are presented, where electronic structures of these materials and other properties derived from electronic structures are calculated and compared with experiments where available. Generally good agreements have been found between theory and experiments.

  3. Stator insulation systems for medium voltage PWM drives fed motors

    Energy Technology Data Exchange (ETDEWEB)

    Gao, G.; Chen, W. [TECO-Westinghouse Motor Co., Round Rock, TX (United States)

    2005-07-01

    Adjustable speed drives (ASD) are commonly used in power electronics and control systems. It is estimated that more than 15 per cent of medium voltage motors are currently fed by such drives worldwide. A research project was conducted to examine the influence of medium voltage pulse width modulated (PWM) ASD on motor stator insulation systems. The findings, based on accelerated laboratory tests, have helped designers to improve the capabilities of the insulation system used for ASD-fed motors. Repetitive, high magnitude voltage spikes with fast rise time create significant stress on insulation systems. Gradual deterioration and premature failure of the motor insulation can result from surge voltages which generate surface discharges between phase windings/end windings, or partial discharges between stator turns. However, there is no industrial standard to evaluate motor insulation life under ASD-cable-motor conditions. Several material manufacturers have developed their own version of corona resistant material. However, the insulation life of ASD-fed motors does not depend solely on the raw materials. Rather, it depends on the complete insulation system, including the stator manufacturing process. In order to address this problem, TECO-Westinghouse Motor Company has developed special design criteria and manufacturing practices in order to reduce winding insulation temperature and to compensate for the additional heat generated by high frequency contents in the PWM voltage waveform. A patent pending new cooling system should reduce winding temperature by 15 to 20 degrees C. This paper presented design considerations for turn insulation, groundwall insulation, and a voltage stress grading system. A new thermal class H insulation system was also described. 6 refs., 2 tabs., 5 figs.

  4. Ceramic processing of boron nitride insulators

    Energy Technology Data Exchange (ETDEWEB)

    Morgan, C. S.; McCulloch, R. W.

    1977-01-01

    Fuel pin simulators (FPS) are the prime elements of several test facilities at the Oak Ridge National Laboratory (ORNL). These experimental facilities are used to conduct out-of-reactor thermal-hydraulic and mechanical interaction safety tests for both light-water and breeder reactor programs. The FPS units simulate the geometry, heat flux profiles, and operational capabilities of a reactor core element under steady-state and transient conditions. They are subjected to temperatures as high as 1600/sup 0/C (2900/sup 0/F) and power levels as high as 57.5 kW/m (17.5 kW/ft) as well as severe thermal stresses during transient tests. The insulating material in the narrow annulus between the heating coil and the FPS sheath is subjected to very rigorous conditions. Accuracy of the reactor safety test information and validity of the test data depend on the heat flux uniformity under all test conditions and on the reliable operation of all fuel pin simulators and their internal thermocouples. Boron nitride (BN), because of its high degree of chemical inertness combined with its relatively unique properties of high thermal conductivity and low electrical conductivity, is the most suitable insulating material for FPS. The important BN properties, thermal conductivity and electrical resistance, are strongly influenced by crystallite orientation and by impurities. The article describes new BN powder processing techniques, which optimize these properties.

  5. Enhancing Casimir repulsion via topological insulator multilayers

    Science.gov (United States)

    Zeng, Ran; Chen, Liang; Nie, Wenjie; Bi, Meihua; Yang, Yaping; Zhu, Shiyao

    2016-08-01

    We propose to observe the enhanced Casimir repulsion between two parallel multilayer walls made of alternating layers of a topological insulator (TI) and a normal insulator. Based on the transfer matrix method, the Fresnel coefficients matrix is generalized to apply to the TI multilayer structure. The Casimir repulsion under the influence of the magnetization orientation in the magnetic coatings on TI layer surfaces, the layer thicknesses, and the topological magnetoelectric polarizability, is investigated. We show that, for the multilayer structures with parallel magnetization on the TI layer surfaces, it is possible to enhance the repulsion by increasing the TI layer number, which is due to the accumulation of the contribution to the repulsion from the polarization rotation effect occurring on each TI layer surface. Generally, in the distance region where there is Casimir attraction between semi-infinite TIs, the force may turn into repulsion in TI multilayer structure, and in the region of repulsion for semi-infinite TI, the repulsive force can be enhanced in magnitude, the enhancement tends to a maximum while the structure contains sufficiently many layers.

  6. ITER coils insulation R and D program

    Energy Technology Data Exchange (ETDEWEB)

    Vieira, R.F.; Sugimoto, M.; Osaki, O.; Fujioka, T.; Korsunsky, V.; Reed, R.P.; Katheder, H.; Broadbent, A.

    1995-12-31

    The ITER coil insulation systems are required for operating voltages up to 10 KV and to support shear and normal compression loads through the winding pack. Manufacturing considerations and nuclear radiation resistance also influence the choice of suitable systems. A screening program of candidate systems is being conducted in stages. The first stage is reported in this paper. Present R and D data based on small samples indicate a static shear strength of about 85 MPa for a glass or alumina and epoxy resin vacuum pressure impregnation system and 50 MPa for a pre-impregnated glass/epoxy resin system with polyimide interleaved at a temperature of 4K. The preliminary irradiation results show that coating the steel surface with inorganic materials such as Al{sub 2}O{sub 3} or ZrO{sub 2}/8 Y{sub 2}O{sub 3} is beneficial in increasing the radiation resistance as far as shear strength is concerned. In addition Tetrafunctional epoxy (TGDM) systems appear to be more radiation resistant than Diglycidyl Ether of Bisphenol-A (DGEBA) systems. Further R and D work will focus on prototypical samples to continue evaluation of the performance of the insulation systems.

  7. Thermally Insulating, Kinematic Tensioned-Fiber Suspension

    Science.gov (United States)

    Voellmer, George M.

    2004-01-01

    A salt pill and some parts of a thermally insulating, kinematic suspension system that holds the salt pill rigidly in an adiabatic-demagnetization refrigerator (ADR) is presented. "Salt pill" in this context denotes a unit comprising a cylindrical container, a matrix of gold wires in the container, and a cylinder of ferric ammonium alum (a paramagnetic salt) that has been deposited on the wires. The structural members used in this system for both thermal insulation and positioning are aromatic polyamide fibers (Kevlar(R) or equivalent) under tension. This suspension system is designed to satisfy several special requirements to ensure the proper operation of the ADR. These requirements are to (1) maintain the salt pill at a specified position within the cylindrical bore of an electromagnet; (2) prevent vibrations, which would cause dissipation of heat in the salt pill; and (3) minimize the conduction of heat from the electromagnet bore and other neighboring objects to the salt pill; all while (4) protecting the salt pill (which is fragile) against all tensile and bending loads other than those attributable to its own weight. In addition, the system is required to consist of two subsystems -- one for the top end and one for the bottom end of the salt pill -- that can be assembled and tensioned separately from each other and from the salt pill, then later attached to the salt pill.

  8. Quantitative study of the spin Hall magnetoresistance in ferromagnetic insulator/normal metal hybrids

    NARCIS (Netherlands)

    Althammer, M.; Meyer, S.; Nakayama, H.; Schreier, M.; Altmannshofer, S.; Weiler, M.; Huebl, H.; Gesprägs, S.; Opel, M.; Gross, R.; Meier, D.; Klewe, C.; Kuschel, T.; Schmalhorst, J.M.; Reiss, G.; Shen, L.; Gupta, A.; Chen, Y.T.; Bauer, G.E.W.; Saitoh, E.; Goennenwein, S.T.B.

    2013-01-01

    We experimentally investigate and quantitatively analyze the spin Hall magnetoresistance effect in ferromagnetic insulator/platinum and ferromagnetic insulator/nonferromagnetic metal/platinum hybrid structures. For the ferromagnetic insulator, we use either yttrium iron garnet, nickel ferrite, or ma

  9. Nanowire-based All Oxide Solar Cells

    Energy Technology Data Exchange (ETDEWEB)

    Yang*, Benjamin D. Yuhas and Peidong; Yang, Peidong

    2008-12-07

    We present an all-oxide solar cell fabricated from vertically oriented zinc oxide nanowires and cuprous oxide nanoparticles. Our solar cell consists of vertically oriented n-type zinc oxide nanowires, surrounded by a film constructed from p-type cuprous oxide nanoparticles. Our solution-based synthesis of inexpensive and environmentally benign oxide materials in a solar cell would allow for the facile production of large-scale photovoltaic devices. We found that the solar cell performance is enhanced with the addition of an intermediate oxide insulating layer between the nanowires and the nanoparticles. This observation of the important dependence of the shunt resistance on the photovoltaic performance is widely applicable to any nanowire solar cell constructed with the nanowire array in direct contact with one electrode.

  10. Test method for measuring insulation values of cryogenic pipes

    NARCIS (Netherlands)

    Velthuis, J.F.M.; Blokland, H.; Klaver, B.W.; Beld, C. van de

    2010-01-01

    In this paper a large-area heat flux and temperature sensor (HFT) is used for the evaluation of the insulation value of cryogenic pipes. The HFT is flexible and clamp-on. The test method is relatively simple and can be used in-situ. The HFT makes it possible to monitor insulation performance over el

  11. Test method for measuring insulation values of cryogenic pipes

    NARCIS (Netherlands)

    Velthuis, J.F.M.; Blokland, H.; Klaver, B.W.; Beld, C. van de

    2010-01-01

    In this paper a large-area heat flux and temperature sensor (HFT) is used for the evaluation of the insulation value of cryogenic pipes. The HFT is flexible and clamp-on. The test method is relatively simple and can be used in-situ. The HFT makes it possible to monitor insulation performance over

  12. Dirac-fermion-mediated ferromagnetism in a topological insulator

    NARCIS (Netherlands)

    Checkelsky, Joseph G.; Ye, Jianting; Onose, Yoshinori; Iwasa, Yoshihiro; Tokura, Yoshinori

    2012-01-01

    Topological insulators are a newly discovered class of materials in which helical conducting modes exist on the surface of a bulk insulator(1-6). Recently, theoretical works have shown that breaking gauge symmetry(7) or time-reversal symmetry(8) in these materials produces exotic states that, if rea

  13. On new electromagnetic waves in a multicomponent insulator

    NARCIS (Netherlands)

    Dubovik, V. M.

    The dispersion equation for additional transverse electromagnetic waves in a multicomponent amorphous insulator is analyzed in the vicinity of a narrow absorption line. Such waves can be excited due to spatial dispersion associated with fluctuation of the polarizability of insulator molecules. The

  14. Problems of Automatic Test of Insulation in Cable Production

    Science.gov (United States)

    Red'ko, V. V.; Leonov, A. P.; Red'ko, L. A.; Bolgova, V. A.

    2016-01-01

    The article presents a qualitative and quantitative assessment of cable products insulation defects that can be reliably detected by means of the electrosparking control during the cable production process. The performance potential of technological control is evaluated: the limit of reliable detection of defective places in insulation taking into account the technical capabilities of modern control devices is marked.

  15. 49 CFR 236.552 - Insulation resistance; requirement.

    Science.gov (United States)

    2010-10-01

    ... between periodic tests shall be not less than 250,000 ohms for a continuous inductive automatic cab signal... Insulation resistance; requirement. When periodic test prescribed in § 236.588 is performed, insulation resistance between wiring and ground of continuous inductive automatic cab signal system, automatic...

  16. 30 CFR 75.513 - Electric conductor; capacity and insulation.

    Science.gov (United States)

    2010-07-01

    ... § 75.513 Electric conductor; capacity and insulation. All electric conductors shall be sufficient in size and have adequate current carrying capacity and be of such construction that a rise in temperature... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Electric conductor; capacity and insulation....

  17. Insulating modernism isolated and non-isolated thermodynamics in architecture

    CERN Document Server

    Moe, Kiel

    2014-01-01

    What is the best way to achieve sustainable energy savings in buildings? The mainstream construction industry has been saying for decades: it's insulation. Today there is a growing movement among architects who claim that, by contrast, it isintelligent design thatprovides the best energetic results. This book describes the history, theory and facts of the mainstream insulation technology and the emerging alternative design approaches.

  18. Predicting performance of coatings under thermal insulation at high temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Lasarte, C. (Pequiven, S.A., Maracaibo (Venezuela). Petroquimica de Venezuela); Rincon, O.T. De; Montiel, A. (Univ. del Zulia, Maracaibo (Venezuela). Centro de Estudios de Corrosion)

    1994-10-01

    A probe was designed to evaluate coatings used under thermal insulation for temperatures of 30 to 150 C. This article describes the results obtained with various combinations of coatings (aluminum silicone, inorganic zinc, and aluminum metallizing) and thermal insulators (mineral wool, fiber glass, and calcium silicate), which were recommended in NACE Publication 6H189.

  19. Magnetically insulated electron flows in pulsed power systems

    Science.gov (United States)

    Lawconnell, Robert I.

    1989-08-01

    Magnetic insulation is crucial in the operation of large pulsed power systems. Particular attention will be paid to describing magnetic insulation in realistic pulsed power systems. A theoretical model is developed that allows the production of self consistent magnetically insulated laminar flows in perturbed cylindrical systems given only the electron density profile. The theory is checked and justified by detailed comparisons with results from a 2-dimensional electromagnetic code, MASK. The procedure followed in the theoretical development is to use the relativistic Vlasov equation, Ampere's law and Gauss' law, to obtain a relation between the density profile and the velocity profile for insulated flows. Given the density profile and the corresponding derived velocity profile, a self consistent flow solution is obtained by means of Maxwell's equations. It is checked by taking a special case (corresponding to no perturbations) which results in the well known Brillouin flow theory. Emphasis is placed on determining the magnetic insulation threshold of a pulsed power system employing a plasma erosion opening switch. The procedure employed in the computational study is to vary critical aspects of the pulsed power system and then note whether magnetic insulation breaks down. The point at which magnetic insulation breaks down (as a function of geometry, load impedance, and applied voltage) is the magnetic insulation threshold for the system.

  20. Radiation damage of insulating crystals induced by electronic excitation

    Energy Technology Data Exchange (ETDEWEB)

    Itoh, Noriaki

    1988-05-01

    A review is given on radiation damage of insulating crystals arising from energy imparted to solids into electronic excitation. Emphasis is placed in describing the mechanism. The role of the exciton-phonon interaction in the production of radiation damage is described and the radiation damage processes in a few typical insulators such as alkali halides, alkali earth fluorides and silicon dioxide are described.

  1. Polymer-Reinforced, Non-Brittle, Lightweight Cryogenic Insulation

    Science.gov (United States)

    Hess, David M.

    2013-01-01

    The primary application for cryogenic insulating foams will be fuel tank applications for fueling systems. It is crucial for this insulation to be incorporated into systems that survive vacuum and terrestrial environments. It is hypothesized that by forming an open-cell silica-reinforced polymer structure, the foam structures will exhibit the necessary strength to maintain shape. This will, in turn, maintain the insulating capabilities of the foam insulation. Besides mechanical stability in the form of crush resistance, it is important for these insulating materials to exhibit water penetration resistance. Hydrocarbon-terminated foam surfaces were implemented to impart hydrophobic functionality that apparently limits moisture penetration through the foam. During the freezing process, water accumulates on the surfaces of the foams. However, when hydrocarbon-terminated surfaces are present, water apparently beads and forms crystals, leading to less apparent accumulation. The object of this work is to develop inexpensive structural cryogenic insulation foam that has increased impact resistance for launch and ground-based cryogenic systems. Two parallel approaches will be pursued: a silica-polymer co-foaming technique and a post foam coating technique. Insulation characteristics, flexibility, and water uptake can be fine-tuned through the manipulation of the polyurethane foam scaffold. Silicate coatings for polyurethane foams and aerogel-impregnated polyurethane foams have been developed and tested. A highly porous aerogel-like material may be fabricated using a co-foam and coated foam techniques, and can insulate at liquid temperatures using the composite foam

  2. 49 CFR 229.81 - Emergency pole; shoe insulation.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Emergency pole; shoe insulation. 229.81 Section... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Safety Requirements Electrical System § 229.81 Emergency pole; shoe insulation. (a) Each locomotive equipped with a pantograph...

  3. Topological Field Theory of Time-Reversal Invariant Insulators

    Energy Technology Data Exchange (ETDEWEB)

    Qi, Xiao-Liang; Hughes, Taylor; Zhang, Shou-Cheng; /Stanford U., Phys. Dept.

    2010-03-19

    We show that the fundamental time reversal invariant (TRI) insulator exists in 4 + 1 dimensions, where the effective field theory is described by the 4 + 1 dimensional Chern-Simons theory and the topological properties of the electronic structure is classified by the second Chern number. These topological properties are the natural generalizations of the time reversal breaking (TRB) quantum Hall insulator in 2 + 1 dimensions. The TRI quantum spin Hall insulator in 2 + 1 dimensions and the topological insulator in 3 + 1 dimension can be obtained as descendants from the fundamental TRI insulator in 4 + 1 dimensions through a dimensional reduction procedure. The effective topological field theory, and the Z{sub 2} topological classification for the TRI insulators in 2+1 and 3+1 dimensions are naturally obtained from this procedure. All physically measurable topological response functions of the TRI insulators are completely described by the effective topological field theory. Our effective topological field theory predicts a number of novel and measurable phenomena, the most striking of which is the topological magneto-electric effect, where an electric field generates a magnetic field in the same direction, with an universal constant of proportionality quantized in odd multiples of the fine structure constant {alpha} = e{sup 2}/hc. Finally, we present a general classification of all topological insulators in various dimensions, and describe them in terms of a unified topological Chern-Simons field theory in phase space.

  4. Innovative Retrofit Insulation Strategies for Concrete Masonry Foundations

    Energy Technology Data Exchange (ETDEWEB)

    Huelman, P. [Univ. of Minnesota, St. Paul, MN (United States). NorthernSTAR Building America Partnership; Goldberg, L. [Univ. of Minnesota, St. Paul, MN (United States). NorthernSTAR Building America Partnership; Jacobson, R. [Univ. of Minnesota, St. Paul, MN (United States). NorthernSTAR Building America Partnership

    2015-05-06

    This study was designed to test a new approach for foundation insulation retrofits, with the goal of demonstrating improved moisture control, improved occupant comfort, and reduced heat loss. Because conducting experimental research on existing below-grade assemblies is very difficult, most of the results are based on simulations. The retrofit approach consists of filling open concrete block cores with an insulating material and adding R-10 exterior insulation that extends 1 ft below grade. The core fill is designed to improve the R-value of the foundation wall and increase the interior wall surface temperature, but more importantly to block convection currents that could otherwise increase moisture loads on the foundation wall and interior space. The exterior insulation significantly reduces heat loss through the most exposed part of the foundation and further increases the interior wall surface temperature. This improves occupant comfort and decreases the risk of condensation. Such an insulation package avoids the full-depth excavation necessary for exterior insulation retrofits, reduces costs, and eliminates the moisture and indoor air quality risks associated with interior insulation retrofits. Retrofit costs for the proposed approach were estimated at roughly half those of a full-depth exterior insulation retrofit.

  5. Impulse Volt-Time Characteristics of Oil and OIP Insulation

    Directory of Open Access Journals (Sweden)

    S. Venkatesan

    2005-01-01

    Full Text Available Estimation of insulation strength of transformer oil and Oil Impregnated Paper (OIP insulation, which constitutes major portion of insulation in power transformer, is an important task. Also, it is often necessary to evaluate the breakdown strength of oil and OIP under non-standard impulse voltages, since the oil and OIP insulation is subjected to non-standard waveshapes between inter-disc and inter-turn insulation. This necessitates for a generalized model to estimate the insulation strength of it. In this study impulse strength of transformer oil and OIP insulation have been extensively analysed for very small electrode gap distances ranging from 0.1 to 2.5 mm, which represents the inter-turn and inter-disc thickness of the insulation. The statistical mean volt-time characteristics for uniform and highly non-uniform electrode configurations are obtained experimentally for few gap distances. A Hyperbolic model is developed based on the Disruptive Effect (DE model parameters, namely onset voltage (Uo and Critical Disruptive Effect Area (DE * to predict the volt-time characteristics. The DE parameters are also utilised to predict the impulse breakdown characteristics of oil and OIP under non-standard impulse voltages of standard and unidirectional oscillatory impulse waveshapes for all the gap distances and the errors are found to be less than 10%.

  6. Market Analysis of Environmentally Friendly Celulose Insulation Material in the Construction Business in Srinagar, India

    OpenAIRE

    Khan, Rakhshanda

    2009-01-01

    The purpose of this thesis is to analyze the market for environmentally-friendly cellulose insulation material in Srinagar, J&K, India. Insulation plays an important role when trying to decrease the energy consumption. At the same time, insulation creates better living conditions. Despite several benefits of insulation, the con-structions are not commonly insulated. To get a deeper understanding of this con-tradiction, this study focuses on questions: 1) what is the demand for cellulose insul...

  7. Prospect of Thermal Insulation by Silica Aerogel: A Brief Review

    Science.gov (United States)

    Hasan, Mohammed Adnan; Sangashetty, Rashmi; Esther, A. Carmel Mary; Patil, Sharanabasappa B.; Sherikar, Baburao N.; Dey, Arjun

    2017-10-01

    Silica aerogel is a unique ultra light weight nano porous material which offers superior thermal insulation property as compared to the conventional thermal insulating materials. It can be applied not only for ground and aerospace applications but also in low and high temperatures and pressure regimes. Aerogel granules and monolith are synthesized by the sol-gel route while aerogel based composites are fabricated by the reinforcement of fibers, particle and opacifiers. Due to the characteristic brittleness (i.e., poor mechanical properties) of monolith or bulk aerogel, it is restricted in several applications. To improve the mechanical integrity and flexibility, usually different fibers are reinforced with aerogel and hence it can be used as flexible thermal insulation blankets. Further, to achieve effective thermal insulation behaviour particularly at high temperature, often opacifiers are doped with silica aerogel. In the present brief review, the prospects of bulk aerogel and aerogel based composites are discussed for the application of thermal insulation and thermal stability.

  8. Genomic discovery of potent chromatin insulators for human gene therapy.

    Science.gov (United States)

    Liu, Mingdong; Maurano, Matthew T; Wang, Hao; Qi, Heyuan; Song, Chao-Zhong; Navas, Patrick A; Emery, David W; Stamatoyannopoulos, John A; Stamatoyannopoulos, George

    2015-02-01

    Insertional mutagenesis and genotoxicity, which usually manifest as hematopoietic malignancy, represent major barriers to realizing the promise of gene therapy. Although insulator sequences that block transcriptional enhancers could mitigate or eliminate these risks, so far no human insulators with high functional potency have been identified. Here we describe a genomic approach for the identification of compact sequence elements that function as insulators. These elements are highly occupied by the insulator protein CTCF, are DNase I hypersensitive and represent only a small minority of the CTCF recognition sequences in the human genome. We show that the elements identified acted as potent enhancer blockers and substantially decreased the risk of tumor formation in a cancer-prone animal model. The elements are small, can be efficiently accommodated by viral vectors and have no detrimental effects on viral titers. The insulators we describe here are expected to increase the safety of gene therapy for genetic diseases.

  9. Profile optimization for an HV insulator in vacuum

    Energy Technology Data Exchange (ETDEWEB)

    Egiziano, L.; Spagnuolo, G.; Tucci, V. [Univ. di Salerno, Fisciano (Italy). Dipt. di Ingegneria dell`Informazione e Ingegneria Elettrica; Lupo, G.; Petrarca, C. [Univ. di Napoli Federico II (Italy). Dipt. di Ingegneria Elettrica

    1996-12-31

    The exposition of HV solid insulators in vacuum to relevant voltage differences could determine the surface flashover along the solid dielectric-vacuum interface. Insulator holdoff capabilities can be significantly improved by limiting the field intensity in proximity of the electrodes by means of a Geometrical Field Control, namely designing the insulator profile so that the region subjected to high field is shifted away from the regions where the electrodes join the solid dielectric-vacuum interface. In this paper a new profile for an HV insulator in vacuum is presented. An axially symmetrical configuration constituted by a couple of coaxial cylindrical electrodes is considered, with the insulator shape designed to guarantee similar performances for both field polarities. The effectiveness of the design is validated by means of numerical simulations and by experimental results involving D.C. and impulse flashover performances.

  10. Natural convection in sheep's wool and paper insulation

    DEFF Research Database (Denmark)

    Kristiansen, Finn Harken; Rode, Carsten

    1999-01-01

    The natural convection of two types of alternative insulation material has been measured in the convection apparatus of Department of Buildings and Energy. Measurements have been made on a type of sheep's wool (Herawool) with support fibres from the firm of Heraklith and a type of paper insulation...... (Ekofiber Vind) from Ekofiber. The density of the sheep's wool was 28 kg/m3 and the paper insulation was 65 kg/m3. The temperature on the hot side of the test specimen was 30°C and on the cold side ca. -10°C, that is a temperature difference over the test specimen of ca. 40 K.The measurements on the two...... alternative insulation materials have been compared to previous measurements on a traditional insulation material (Rockwool).Calculations of the convection conditions in the two materials have been made by means of a computer program CHConP. The measurements have been compared with these calculations....

  11. Gas insulated transmission line having low inductance intercalated sheath

    Science.gov (United States)

    Cookson, Alan H.

    1978-01-01

    A gas insulated transmission line including an outer sheath, an inner conductor disposed within the outer sheath, and an insulating gas between the inner conductor and the outer sheath. The outer sheath comprises an insulating tube having first and second ends, and having interior and exterior surfaces. A first electrically conducting foil is secured to the interior surface of the insulating tube, is spirally wound from one tube end to the second tube end, and has a plurality of overlapping turns. A second electrically conducting foil is secured to the exterior surface of the insulating tube, and is spirally wound in the opposite direction from the first electrically conducting foil. By winding the foils in opposite directions, the inductances within the intercalated sheath will cancel each other out.

  12. Idefix insulator activity can be modulated by nearby regulatory elements.

    Science.gov (United States)

    Brasset, E; Bantignies, F; Court, F; Cheresiz, S; Conte, C; Vaury, C

    2007-01-01

    Insulators play important roles in controlling gene activity and maintaining regulatory independence between neighbouring genes. In this article, we show that the enhancer-blocking activity of the insulator present within the LTR retrotransposon Idefix can be abolished if two copies of the region containing the insulator--specifically, the long terminal repeat (LTR)--are fused to the retrotransposon's 5' untranslated region (5' UTR). The presence of this combination of two [LTR-5' UTR] modules is a prerequisite for the loss of enhancer-blocking activity. We further show that the 5' UTR causes flanking genomic sequences to be displaced to the nuclear periphery, which is not observed when two insulators are present by themselves. This study thus provides a functional link between insulators and independent genomic modules, which may cooperate to allow the specific regulation of defined genomic loci via nuclear repositioning. It further illustrates the complexity of genomic regulation within a chromatic environment with multiple functional elements.

  13. Thermal insulation of outside wall. Aussenwand-Waermedaemmung

    Energy Technology Data Exchange (ETDEWEB)

    Thelen, G.

    1980-09-11

    The invention concerns the thermal insulation of the outside wall with a layer of thermal insulation material glued to the outside wall, a pressure layer applied to this and an outer layer of mortar. The purpose of the invention is to improve thermal insulation of this kind, so that it complies with the conditions of fire class A. The problem is solved by having the thermal insulation layer consisting of mineral or ceramic fibres, which are processed or solidified into plates, mats etc., and having the mats or plates fixed to the wall with pins. The thermal insulation layer built up of ceramic or mineral fibres fulfils the requirements of fire class A and can be used without infringing the present building regulations on facades above the 8th floor.

  14. Buffer layer engineering on graphene via various oxidation methods for atomic layer deposition

    Science.gov (United States)

    Takahashi, Nobuaki; Nagashio, Kosuke

    2016-12-01

    The integration of a high-k oxide on graphene using atomic layer deposition requires an electrically reliable buffer layer. In this study, Y was selected as the buffer layer due to its highest oxidation ability among the rare-earth elements, and various oxidation methods (atmospheric, and high-pressure O2 and ozone annealing) were applied to the Y metal buffer layer. By optimizing the oxidation conditions of the top-gate insulator, we successfully improved the capacitance of the top gate Y2O3 insulator and demonstrated a large I on/I off ratio for bilayer graphene under an external electric field.

  15. Improving the reliability of stator insulation system in rotating machines

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, G.K.; Sedding, H.G.; Culbert, I.M. [Ontario Hydro, Toronto, ON, (Canada)

    1997-07-01

    Reliable performance of rotating machines, especially generators and primary heat transport pump motors, is critical to the efficient operation on nuclear stations. A significant number of premature machine failures have been attributed to the stator insulation problems. Ontario Hydro has attempted to assure the long term reliability of the insulation system in critical rotating machines through proper specifications and quality assurance tests for new machines and periodic on-line and off-line diagnostic tests on machines in service. The experience gained over the last twenty years is presented in this paper. Functional specifications have been developed for the insulation system in critical rotating machines based on engineering considerations and our past experience. These specifications include insulation stress, insulation resistance and polarization index, partial discharge levels, dissipation factor and tip up, AC and DC hipot tests. Voltage endurance tests are specified for groundwall insulation system of full size production coils and bars. For machines with multi-turn coils, turn insulation strength for fast fronted surges in specified and verified through tests on all coils in the factory and on samples of finished coils in the laboratory. Periodic on-line and off-line diagnostic tests were performed to assess the condition of the stator insulation system in machines in service. Partial discharges are measured on-line using several techniques to detect any excessive degradation of the insulation system in critical machines. Novel sensors have been developed and installed in several machines to facilitate measurements of partial discharges on operating machines. Several off-line tests are performed either to confirm the problems indicated by the on-line test or to assess the insulation system in machines which cannot be easily tested on-line. Experience with these tests, including their capabilities and limitations, are presented. (author)

  16. Associating Specific Materials with Topological Insulation Behavior

    Science.gov (United States)

    Zhang, Xiuwen

    2014-03-01

    The first-principles (a) total-energy/stability calculations combined with (b) electronic structure calculations of band inversion, spin-polarization and topological invariants (Z2) has led to the design and prediction of specific materials that are topological insulators in this study. We classify bulk materials into four types of band-inversion behaviors (TI-1, TI-2, BI-3, BI-4), based on the number of band inversions and their distributions on various time reversal invariant k points. Depending on the inversion type in bulk, the corresponding surface states have different protections e.g., protected by time reversal symmetry (in TI-1 materials), spatial symmetry (in TI-2), or not protected (in BI-3, BI-4). Subject 1 Discovery of new TI by screening materials for a Z2 metric: Such high-throughput search in the framework of Inverse Design methodology predicts a few previously undocumented materials that are TI-1 in their ground state crystal structure. We also predict dozens of materials that are TI-1 however in structures that are not ground states (e.g. perovskite structure of II-Bi-O3). Subject 2 Design Principle to increase the gap of TI-1 materials: In HgTe-like cubic topological materials, the insulating gap is zero since the spin-orbit splitting is positive and so a 4-fold half-filled p-like band is near the Fermi level. By design of hybridization of d-orbitals into the p-like bands, one can create negative spin-orbit splitting and so a finite insulating gap. Subject 3 Unconventional spin textures of TI surface states: Despite the fact that one of our predicted TI-1 KBaBi has inversion symmetry in the bulk-a fact that that would preclude bulk spin polarization-we find a Dresselhaus-like spin texture with non-helical spin texture. This originates from the local spin polarization, anchored on the atomic sites with inversion asymmetric point groups, that is compensated due to global inversion symmetry in bulk. In collaboration with: Jun-Wei Luo, Qihang Liu

  17. Designing Predictive Diagnose Method for Insulation Resistance Degradation of the Electrical Power Cables from Neutral Insulated Power Networks

    Science.gov (United States)

    Dobra, R.; Pasculescu, D.; Risteiu, M.; Buica, G.; Jevremović, V.

    2017-06-01

    This paper describe some possibilities to minimize voltages switching-off risks from the mining power networks, in case of insulated resistance faults by using a predictive diagnose method. The cables from the neutral insulated power networks (underground mining) are designed to provide a flexible electrical connection between portable or mobile equipment and a point of supply, including main feeder cable for continuous miners, pump cable, and power supply cable. An electronic protection for insulated resistance of mining power cables can be made using this predictive strategy. The main role of electronic relays for insulation resistance degradation of the electrical power cables, from neutral insulated power networks, is to provide a permanent measurement of the insulated resistance between phases and ground, in order to switch-off voltage when the resistance value is below a standard value. The automat system of protection is able to signalize the failure and the human operator will be early informed about the switch-off power and will have time to take proper measures to fix the failure. This logic for fast and automat switch-off voltage without aprioristic announcement is suitable for the electrical installations, realizing so a protection against fires and explosion. It is presented an algorithm and an anticipative relay for insulated resistance control from three-phase low voltage installations with insulated neutral connection.

  18. Spontaneously formed high-performance charge-transport layers of organic single-crystal semiconductors on precisely synthesized insulating polymers

    Science.gov (United States)

    Makita, Tatsuyuki; Sasaki, Masayuki; Annaka, Tatsuro; Sasaki, Mari; Matsui, Hiroyuki; Mitsui, Chikahiko; Kumagai, Shohei; Watanabe, Shun; Hayakawa, Teruaki; Okamoto, Toshihiro; Takeya, Jun

    2017-04-01

    Charge-transporting semiconductor layers with high carrier mobility and low trap-density, desired for high-performance organic transistors, are spontaneously formed as a result of thermodynamic phase separation from a blend of π-conjugated small molecules and precisely synthesized insulating polymers dissolved in an aromatic solvent. A crystal film grows continuously to the size of centimeters, with the critical conditions of temperature, concentrations, and atmosphere. It turns out that the molecular weight of the insulating polymers plays an essential role in stable film growth and interfacial homogeneity at the phase separation boundary. Fabricating the transistor devices directly at the semiconductor-insulator boundaries, we demonstrate that the mixture of 3,11-didecyldinaphtho[2,3-d:2',3'-d']benzo[1,2-b:4,5-b']dithiophene and poly(methyl methacrylate) with the optimized weight-average molecular weight shows excellent device performances. The spontaneous phase separation with a one-step fabrication process leads to a high mobility up to 10 cm2 V-1 s-1 and a low subthreshold swing of 0.25 V dec-1 even without any surface treatment such as self-assembled monolayer modifications on oxide gate insulators.

  19. Broadband ultrafast photovoltaic detectors based on large-scale topological insulator Sb2Te3/STO heterostructures.

    Science.gov (United States)

    Sun, Honghui; Jiang, Tian; Zang, Yunyi; Zheng, Xin; Gong, Yan; Yan, Yong; Xu, Zhongjie; Liu, Yu; Fang, Liang; Cheng, Xiang'ai; He, Ke

    2017-07-13

    Topological insulators (TIs) are new states of quantum matter in which the spin-momentum-locked surface states reside in the bulk insulating gap and have triggered extensive investigations on fundamental properties and potential applications. Herein, we report scalable, broadband photovoltaic detectors based on the topological insulator Sb2Te3/strontium titanate (STO) heterostructure. Large-scale (2 mm × 5 mm), high crystalline quality p-type Sb2Te3 films were fabricated on an n-type STO substrate by the molecular beam epitaxy (MBE) method. The Sb2Te3/STO heterostructures exhibited pronounced photovoltaic behavior in a wide range of temperatures as a result of a strong built-in field at the hetero-interface. Superior performances of broadband (from visible to infrared, 405 nm-1550 nm) and ultrafast (rise time ∼30 μs, fall time ∼95 μs) photoresponses were achieved under ambient conditions. The prominent repeatability and stability indicated that our photodetectors can operate effectively in harsh circumstances. These results show that stacking the topological insulator thin films on a strongly correlated oxide substrate using the MBE approach holds great promise for high performance optoelectronic applications.

  20. Direct probe of Mott-Hubbard to charge-transfer insulator transition and electronic structure evolution in transition-metal systems

    Energy Technology Data Exchange (ETDEWEB)

    Olalde-Velasco, P; Jimenez-Mier, J; Denlinger, JD; Hussain, Z; Yang, WL

    2011-07-11

    We report the most direct experimental verification of Mott-Hubbard and charge-transfer insulators through x-ray emission spectroscopy in transition-metal (TM) fluorides. The p-d hybridization features in the spectra allow a straightforward energy alignment of the anion-2p and metal-3d valence states, which visually shows the difference between the two types of insulators. Furthermore, in parallel with the theoretical Zaanen-Sawatzky-Allen diagram, a complete experimental systematics of the 3d Coulomb interaction and the 2p-3d charge-transfer energy is reported and could serve as a universal experimental trend for other TM systems including oxides.