WorldWideScience

Sample records for instrument support integration

  1. Integrating Nephelometer Instrument Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Uin, J. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2016-03-01

    The Integrating Nephelometer (Figure 1) is an instrument that measures aerosol light scattering. It measures aerosol optical scattering properties by detecting (with a wide angular integration – from 7 to 170°) the light scattered by the aerosol and subtracting the light scattered by the carrier gas, the instrument walls and the background noise in the detector (zeroing). Zeroing is typically performed for 5 minutes every day at midnight UTC. The scattered light is split into red (700 nm), green (550 nm), and blue (450 nm) wavelengths and captured by three photomultiplier tubes. The instrument can measure total scatter as well as backscatter only (from 90 to 170°) (Heintzenberg and Charlson 1996; Anderson et al. 1996; Anderson and Ogren 1998; TSI 3563 2015) At ARM (Atmospheric Radiation Measurement), two identical Nephelometers are usually run in series with a sample relative humidity (RH) conditioner between them. This is possible because Nephelometer sampling is non-destructive and the sample can be passed on to another instrument. The sample RH conditioner scans through multiple RH values in cycles, treating the sample. This kind of setup allows to study how aerosol particles’ light scattering properties are affected by humidification (Anderson et al. 1996). For historical reasons, the two Nephelometers in this setup are labeled “wet” and “dry”, with the “dry” Nephelometer usually being the one before the conditioner and sampling ambient air (the names are switched for the MAOS measurement site due to the high RH of the ambient air).

  2. Instruments to assess integrated care

    DEFF Research Database (Denmark)

    Lyngsø, Anne Marie; Godtfredsen, Nina Skavlan; Høst, Dorte

    2014-01-01

    INTRODUCTION: Although several measurement instruments have been developed to measure the level of integrated health care delivery, no standardised, validated instrument exists covering all aspects of integrated care. The purpose of this review is to identify the instruments concerning how to mea...... was prevalent. It is uncertain whether development of a single 'all-inclusive' model for assessing integrated care is desirable. We emphasise the continuing need for validated instruments embedded in theoretical contexts.......INTRODUCTION: Although several measurement instruments have been developed to measure the level of integrated health care delivery, no standardised, validated instrument exists covering all aspects of integrated care. The purpose of this review is to identify the instruments concerning how...... to measure the level of integration across health-care sectors and to assess and evaluate the organisational elements within the instruments identified. METHODS: An extensive, systematic literature review in PubMed, CINAHL, PsycINFO, Cochrane Library, Web of Science for the years 1980-2011. Selected...

  3. Integrated Instrumentation and Control Upgrade Plan

    International Nuclear Information System (INIS)

    Wilkinson, D.; Sun, B.; Wray, L.; Smith, J.

    1992-02-01

    This document presents the first industry-wide integrated research and development plan to support upgrading instrumentation and control (I ampersand C) systems in nuclear power plants in the United States. The plan encompasses both solving obsolescence problems and introducing modern I ampersand C technology into the industry. Accomplishing this plan will provide the technological base to modernize existing plants, as well as bridge the gap to meet Advanced Light Water Reactor (ALWR) requirements for modern I ampersand C systems. This plan defines Research and Development tasks to meet the identified needs for the following technical elements: Instrumentation, Control and Protection, Man-Machine Support Systems, Maintenance, Communications, Verification and Validation, and Specifications and Standards

  4. Support tube of in-core instruments

    International Nuclear Information System (INIS)

    Suzumura, Takeshi; Saito, Shozo; Yasuda, Tetsuo; Shirosaki, Kiyotaka.

    1975-01-01

    Object: To permit satisfactory output measurement by preventing the bending of a in-core instrument tube within a reactor due to vibrations by means of a spring and thereby preventing mechanical damage of an adjacent fuel channel box. Structure: At a corner of a channel box of a fuel assembly, a in-core instrument tube is arranged along a channel box and has its surface provided with a plurality of removable leaf springs arranged in the direction of axis of the in-core instrument tube and each having an arcular tip. Thus, when the in-core instrument tube is inserted into the reactor, the arcular tip portions of the leaf springs are brought into plane contact with the corner of the channel box so that the in-core instrument tube is elastically supported on the channel box. Thus, there is no possibility of causing damage to the adjacent fuel channel box. (Kamimura, M.)

  5. Emotional support, instrumental support, and gambling participation among Filipino Americans.

    Science.gov (United States)

    Kim, Isok; Kim, Wooksoo; Nochajski, Thomas H

    2014-08-01

    Using representative survey data of Filipino Americans in Honolulu and San Francisco (SF) (N = 2,259), we examined the roles of emotional support and instrumental support on gambling participation. With considerable difference in gambling environments between two regions, we conducted two sets of hierarchical regression analyses for Honolulu sample, which has restricted gambling laws, and SF sample, which has legal gambling environment, and compared the effects of two types of social support on gambling participation. The results indicated that emotional support was positively and instrumental support was negatively associated with gambling participation among Filipino Americans in Honolulu. However, neither type of social support was significantly associated with gambling participation among Filipino Americans living in SF. This study highlights the differing roles and effects of instrumental and emotional support on gambling where gambling is restricted. It also suggests that gambling behaviors of Filipino Americans are subject to situation- and environment-specific factors.

  6. Status of the JWST Integrated Science Instrument Module

    Science.gov (United States)

    Greenhouse, Matthew A.; Dunn, Jamie; Kimble, Randy A.; Lambros, Scott; Lundquist, Ray; Rauscher, Bernard J.; Van Campen, Julie

    2015-01-01

    The James Webb Space Telescope (JWST) Integrated Science Instrument Module (ISIM) is the science instrument payload of the JWST. It is one of three system elements that comprise the JWST space vehicle. It consists of four science sensors, a fine guidance sensor, and nine other subsystems that support them. At 1.4 metric tons, it comprises approximately 20% of the JWST mass. The ISIM is currently at 100% integration and has completed 2 of 3 planned element-level space simulation tests. The ISIM is on schedule to be delivered for integration with the Optical Telescope Element during 2015. In this poster, we present an overview of the ISIM and its status.

  7. AFM-CMM integrated instrument user manual

    DEFF Research Database (Denmark)

    Marinello, Francesco; Bariani, Paolo

    This manual gives general important guidelines for a proper use of the integrated AFM-CMM instrument. More information can be collected reading: • N. Kofod Ph.D thesis [1]; • P. Bariani Ph.D thesis [2]; • Dualscope DME 95-200 operation manuals [3]; • SPIP help [4] • Stitching software user manual...

  8. Integrated Support Environment (ISE) Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — Purpose:The Integrated Support Environment (ISE) Laboratory serves the fleet, in-service engineers, logisticians and program management offices by automatically and...

  9. Compact Environmental Anomaly Sensor (CEASE) Flight Integration Support Contract

    National Research Council Canada - National Science Library

    Redus, Robert

    2001-01-01

    .... Under the current contract, Amptek Inc, supported the successful spacecraft specific design work, final calibration, and the delivery, integration, and launch of two CEASE instruments - S/N 001 onto...

  10. Integrated Instrument Simulator Suites for Earth Science

    Science.gov (United States)

    Tanelli, Simone; Tao, Wei-Kuo; Matsui, Toshihisa; Hostetler, Chris; Hair, John; Butler, Carolyn; Kuo, Kwo-Sen; Niamsuwan, Noppasin; Johnson, Michael P.; Jacob, Joseph C.; hide

    2012-01-01

    The NASA Earth Observing System Simulators Suite (NEOS3) is a modular framework of forward simulations tools for remote sensing of Earth's Atmosphere from space. It was initiated as the Instrument Simulator Suite for Atmospheric Remote Sensing (ISSARS) under the NASA Advanced Information Systems Technology (AIST) program of the Earth Science Technology Office (ESTO) to enable science users to perform simulations based on advanced atmospheric and simple land surface models, and to rapidly integrate in a broad framework any experimental or innovative tools that they may have developed in this context. The name was changed to NEOS3 when the project was expanded to include more advanced modeling tools for the surface contributions, accounting for scattering and emission properties of layered surface (e.g., soil moisture, vegetation, snow and ice, subsurface layers). NEOS3 relies on a web-based graphic user interface, and a three-stage processing strategy to generate simulated measurements. The user has full control over a wide range of customizations both in terms of a priori assumptions and in terms of specific solvers or models used to calculate the measured signals.This presentation will demonstrate the general architecture, the configuration procedures and illustrate some sample products and the fundamental interface requirements for modules candidate for integration.

  11. Integrated logistic support analysis system

    International Nuclear Information System (INIS)

    Carnicero Iniguez, E.J.; Garcia de la Sen, R.

    1993-01-01

    Integrating logic support into a system results in a large volume of information having to be managed which can only be achieved with the help of computer applications. Both past experience and growing needs in such tasks have led Emperesarios Agrupados to undertake an ambitious development project which is described in this paper. (author)

  12. Support Systems for Treatment Integrity

    NARCIS (Netherlands)

    Goense, Pauline Brigitta; Boendermaker, Leonieke; van Yperen, Tom

    Objective: This systematic review evaluates the content of effective support provided to practitioners of evidence-based interventions in order to establish and maintain treatment integrity. Method: Four articles covering six outcome studies are included in this review, these studies (1) adequately

  13. Instrumentation and control activities at the Electric Power Research Institute to support operator support systems

    International Nuclear Information System (INIS)

    Naser, J.

    1995-01-01

    Most nuclear power plants in the United States continue to operate with analog instrumentation and control (I and C) technology designed 20 to 40 years ago. This equipment is approaching or exceeding its life expectancy, resulting in increasing maintenance efforts to sustain system performance. Decreasing availability of replacement parts and the accelerating deterioration of the infrastructure of manufacturers that support analog technology exacerbate obsolescence problems and resultant operation and maintenance (O and M) cost increases. Modern digital technology holds a significant potential to improve the safety, cost-effectiveness, productivity, and, therefore, competitiveness of nuclear power plants. Operator support systems provide the tools to help achieve this potential. Reliable, integrated information is a critical element for protecting the utility's capital investment and increasing availability, reliability, and productivity. Integrated operator support systems with integrated information can perform more effectively to increase productivity, to enhance safety, and to reduce O and M costs. The plant communications and computing architecture is the infrastructure needed to allow the implementation of I and C systems and associated operator support systems in an integrated manner. Current technology for distributed digital systems, plant process computers, and plant communications and computing networks support the integration of systems and information. (author). 16 refs

  14. Integrated plant information technology design support functionality

    International Nuclear Information System (INIS)

    Kim, Yeon Seung; Kim, Dae Jin; Barber, P. W.; Goland, D.

    1996-06-01

    This technical report was written as a result of Integrated Plant Information System (IPIS) feasibility study on CANDU 9 project which had been carried out from January, 1994 to March, 1994 at AECL (Atomic Energy Canada Limited) in Canada. From 1987, AECL had done endeavour to change engineering work process from paper based work process to computer based work process through CANDU 3 project. Even though AECL had a lot of good results form computerizing the Process Engineering, Instrumentation Control and Electrical Engineering, Mechanical Engineering, Computer Aided Design and Drafting, and Document Management System, but there remains the problem of information isolation and integration. On this feasibility study, IPIS design support functionality guideline was suggested by evaluating current AECL CAE tools, analyzing computer aided engineering task and work flow, investigating request for implementing integrated computer aided engineering and describing Korean request for future CANDU design including CANDU 9. 6 figs. (Author)

  15. Integrated plant information technology design support functionality

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yeon Seung; Kim, Dae Jin [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of); Barber, P W; Goland, D [Atomic Energy Canada Ltd., (Canada)

    1996-06-01

    This technical report was written as a result of Integrated Plant Information System (IPIS) feasibility study on CANDU 9 project which had been carried out from January, 1994 to March, 1994 at AECL (Atomic Energy Canada Limited) in Canada. From 1987, AECL had done endeavour to change engineering work process from paper based work process to computer based work process through CANDU 3 project. Even though AECL had a lot of good results form computerizing the Process Engineering, Instrumentation Control and Electrical Engineering, Mechanical Engineering, Computer Aided Design and Drafting, and Document Management System, but there remains the problem of information isolation and integration. On this feasibility study, IPIS design support functionality guideline was suggested by evaluating current AECL CAE tools, analyzing computer aided engineering task and work flow, investigating request for implementing integrated computer aided engineering and describing Korean request for future CANDU design including CANDU 9. 6 figs. (Author).

  16. The strategy for intelligent integrated instrumentation and control system development

    International Nuclear Information System (INIS)

    Kwon, Kee Choon; Ham, Chang Shik

    1995-01-01

    All of the nuclear power plants in Korea are operating with analog instrumentation and control ( I and C) equipment which are increasingly faced with frequent troubles, obsolescence and high maintenance expenses. Electrical and computer technology has improved rapidly in recent years and has been applied to other industries. So it is strongly recommended we adopt modern digital and computer technology to improve plant safety and availability. The advanced I and C system, namely, Integrated Intelligent Instrumentation and Control System (I 3 Cs) will be developed for beyond the next generation nuclear power plant. I 3 CS consists of three major parts, the advanced compact workstation, distributed digital control and protection system including Automatic Start-up/Shutdown Intelligent Control System (ASICS) and the computer-based alarm processing and operator support system, namely, Diagnosis, Response, and operator Aid Management System (DREAMS)

  17. Concept mapping instrumental support for problem solving

    NARCIS (Netherlands)

    Stoyanov, S.; Stoyanov, Slavi; Kommers, Petrus A.M.

    2008-01-01

    The main theoretical position of this paper is that it is the explicit problem-solving support in concept mapping software that produces a stronger effect in problem-solving performance than the implicit support afforded by the graphical functionality of concept mapping software. Explicit

  18. PASSCAL Instrument Center Support for Cryoseismology: Methodologies, Challenges, Development and Instrumentation

    Science.gov (United States)

    Beaudoin, B. C.; Anderson, K. R.; Bilek, S. L.; Carpenter, P.; Childs, D.; Chung, P.; Huerta, A. D.; Lingutla, N.; Nikolaus, K.; Winberry, J. P.

    2017-12-01

    Remote portable seismic stations are, in most cases, constrained by logistics and cost. High latitude operations introduce environmental, technical and logistical challenges that require substantially more engineering work to ensure robust, high quality data return. Since 2006, IRIS PASSCAL has been funded by NSF to develop, deploy, and maintain a pool of polar specific seismic stations. At roughly the same time, PASSCAL began supporting experiments specifically targeting glacier dynamics such as the mechanisms of subglacial hydrology, basal shear stress, ice stream stick slip mechanisms, and glacier seismicity. Although much of the development for high-latitude deployments was directly applicable to cryoseismology, these new experiments introduced a unique series of challenges including high ablation, standing water, and moving stations. Our polar development objectives have focused on: Reducing station power requirements, size and weight; Extending the operational temperature of a station; Simplifying logistics; Engineering solutions that are cost effective, manufacturable, serviceable and reusable; And, developing high-latitude communications for both state-of-health and data transmission. To these ends, PASSCAL continues testing new power storage technology, refining established power systems for lighter and smaller power banks, and exploring telemetry solutions to increase high-bandwidth communication options and abilities for remote seismic stations. Further enhancing PASSCAL's ability to support cryoseismology is a recent NSF funded collaborative effort lead by Central Washing University joined by IRIS and New Mexico Tech to build a Geophysical Earth Observatory for Ice Covered Environments (GEOICE). The GEOICE instrument, power system and other integrated ancillary components are designed to require minimal installation time and logistical load (i.e., size and weight), while maximizing ease-of-use in the field and optimizing costs of instrumentation and

  19. Aerodynamics support of research instrument development

    Science.gov (United States)

    Miller, L. Scott

    1990-09-01

    A new velocimetry system is currently being developed at NASA LaRC. The device, known as a Doppler global velocimeter (DGV), can record three velocity components within a plane simultaneously and in near real time. To make measurements the DGV, like many other velocimetry systems, relies on the scattering of light from numerous small particles in a flow field. The particles or seeds are illuminated by a sheet of laser light and viewed by two CCD cameras. The scattered light from the particles will have a frequency which is a function of the source laser light frequency, the viewing angle, and most importantly the seed velocities. By determining the scattered light intensity the velocity can be measured at all points within the light sheet simultaneously. Upon completion of DGV component construction and initial check out a series of tests in the Basic Aerodynamic Research (wind) Tunnel (BART) are scheduled to verify instrument operation and accuracy. If the results are satisfactory, application of the DGV to flight measurements on the F-18 High Alpha Research Vehicle (HARV) are planned. The DGV verification test in the BART facility will utilize a 75 degree swept delta wing model. A major task undertaken this summer included evaluation of previous results for this model. A specific series of tests matching exactly the previous tests and exploring new DGV capabilities were developed and suggested. Another task undertaken was to study DGV system installation possibilities in the F-18 HARV aircraft. In addition, a simple seeding system modification was developed and utilized to make Particle Imaging Velocimetry (PIV) measurements in the BART facility.

  20. Integrated Instrumentation for Light-Emitting Polymers Development

    National Research Council Canada - National Science Library

    Jen, Alex

    2000-01-01

    The major objective of this project is to develop an integrated instrumentation that combines the capability of performing spin coating of uniform polymer thin films under an oxygen and moisture free...

  1. Instruments Measuring Integrated Care: A Systematic Review of Measurement Properties.

    Science.gov (United States)

    Bautista, Mary Ann C; Nurjono, Milawaty; Lim, Yee Wei; Dessers, Ezra; Vrijhoef, Hubertus Jm

    2016-12-01

    Policy Points: Investigations on systematic methodologies for measuring integrated care should coincide with the growing interest in this field of research. A systematic review of instruments provides insights into integrated care measurement, including setting the research agenda for validating available instruments and informing the decision to develop new ones. This study is the first systematic review of instruments measuring integrated care with an evidence synthesis of the measurement properties. We found 209 index instruments measuring different constructs related to integrated care; the strength of evidence on the adequacy of the majority of their measurement properties remained largely unassessed. Integrated care is an important strategy for increasing health system performance. Despite its growing significance, detailed evidence on the measurement properties of integrated care instruments remains vague and limited. Our systematic review aims to provide evidence on the state of the art in measuring integrated care. Our comprehensive systematic review framework builds on the Rainbow Model for Integrated Care (RMIC). We searched MEDLINE/PubMed for published articles on the measurement properties of instruments measuring integrated care and identified eligible articles using a standard set of selection criteria. We assessed the methodological quality of every validation study reported using the COSMIN checklist and extracted data on study and instrument characteristics. We also evaluated the measurement properties of each examined instrument per validation study and provided a best evidence synthesis on the adequacy of measurement properties of the index instruments. From the 300 eligible articles, we assessed the methodological quality of 379 validation studies from which we identified 209 index instruments measuring integrated care constructs. The majority of studies reported on instruments measuring constructs related to care integration (33%) and patient

  2. Instruments Measuring Integrated Care: A Systematic Review of Measurement Properties

    Science.gov (United States)

    BAUTISTA, MARY ANN C.; NURJONO, MILAWATY; DESSERS, EZRA; VRIJHOEF, HUBERTUS JM

    2016-01-01

    Policy Points: Investigations on systematic methodologies for measuring integrated care should coincide with the growing interest in this field of research.A systematic review of instruments provides insights into integrated care measurement, including setting the research agenda for validating available instruments and informing the decision to develop new ones.This study is the first systematic review of instruments measuring integrated care with an evidence synthesis of the measurement properties.We found 209 index instruments measuring different constructs related to integrated care; the strength of evidence on the adequacy of the majority of their measurement properties remained largely unassessed. Context Integrated care is an important strategy for increasing health system performance. Despite its growing significance, detailed evidence on the measurement properties of integrated care instruments remains vague and limited. Our systematic review aims to provide evidence on the state of the art in measuring integrated care. Methods Our comprehensive systematic review framework builds on the Rainbow Model for Integrated Care (RMIC). We searched MEDLINE/PubMed for published articles on the measurement properties of instruments measuring integrated care and identified eligible articles using a standard set of selection criteria. We assessed the methodological quality of every validation study reported using the COSMIN checklist and extracted data on study and instrument characteristics. We also evaluated the measurement properties of each examined instrument per validation study and provided a best evidence synthesis on the adequacy of measurement properties of the index instruments. Findings From the 300 eligible articles, we assessed the methodological quality of 379 validation studies from which we identified 209 index instruments measuring integrated care constructs. The majority of studies reported on instruments measuring constructs related to care

  3. Integrating Instrumental Data Provides the Full Science in 3D

    Science.gov (United States)

    Turrin, M.; Boghosian, A.; Bell, R. E.; Frearson, N.

    2017-12-01

    Looking at data sparks questions, discussion and insights. By integrating multiple data sets we deepen our understanding of how cryosphere processes operate. Field collected data provide measurements from multiple instruments supporting rapid insights. Icepod provides a platform focused on the integration of multiple instruments. Over the last three seasons, the ROSETTA-Ice project has deployed Icepod to comprehensively map the Ross Ice Shelf, Antarctica. This integrative data collection along with new methods of data visualization allows us to answer questions about ice shelf structure and evolution that arise during data processing and review. While data are vetted and archived in the field to confirm instruments are operating, upon return to the lab data are again reviewed for accuracy before full analysis. Recent review of shallow ice radar data from the Beardmore Glacier, an outlet glacier into the Ross Ice Shelf, presented an abrupt discontinuity in the ice surface. This sharp 8m surface elevation drop was originally interpreted as a processing error. Data were reexamined, integrating the simultaneously collected shallow and deep ice radar with lidar data. All the data sources showed the surface discontinuity, confirming the abrupt 8m drop in surface elevation. Examining high resolution WorldView satellite imagery revealed a persistent source for these elevation drops. The satellite imagery showed that this tear in the ice surface was only one piece of a larger pattern of "chatter marks" in ice that flows at a rate of 300 m/yr. The markings are buried over a distance of 30 km or after 100 years of travel down Beardmore Glacier towards the front of the Ross Ice Shelf. Using Icepod's lidar and cameras we map this chatter mark feature in 3D to reveal its full structure. We use digital elevation models from WorldView to map the other along flow chatter marks. In order to investigate the relationship between these surface features and basal crevasses, the deep ice

  4. Instrumentation and control strategies for an integral pressurized water reactor

    Directory of Open Access Journals (Sweden)

    Belle R. Upadhyaya

    2015-03-01

    Full Text Available Several vendors have recently been actively pursuing the development of integral pressurized water reactors (iPWRs that range in power levels from small to large reactors. Integral reactors have the features of minimum vessel penetrations, passive heat removal after reactor shutdown, and modular construction that allow fast plant integration and a secure fuel cycle. The features of an integral reactor limit the options for placing control and safety system instruments. The development of instrumentation and control (I&C strategies for a large 1,000 MWe iPWR is described. Reactor system modeling—which includes reactor core dynamics, primary heat exchanger, and the steam flashing drum—is an important part of I&C development and validation, and thereby consolidates the overall implementation for a large iPWR. The results of simulation models, control development, and instrumentation features illustrate the systematic approach that is applicable to integral light water reactors.

  5. An integrated approach for integrated intelligent instrumentation and control system (I3CS)

    International Nuclear Information System (INIS)

    Jung, C.H.; Kim, J.T.; Kwon, K.C.

    1997-01-01

    Nuclear power plants to guarantee the safety of public should be designed to reduce the operator intervention resulting in operating human errors, identify the process states in transients, and aid to make a decision of their tasks and guide operator actions. For the sake of this purpose, MMIS(MAN-Machine Interface System) in NPPs should be the integrated top-down approach tightly focused on the function-based task analysis including an advanced digital technology, an operator support function, and so on. The advanced I and C research team in KAERI has embarked on developing an Integrated Intelligent Instrumentation and Control System (I 3 CS) for Korea's next generation nuclear power plants. I 3 CS bases the integrated top-down approach on the function-based task analysis, modern digital technology, standardization and simplification, availability and reliability, and protection of investment. (author). 4 refs, 6 figs

  6. An integrated approach for integrated intelligent instrumentation and control system (I{sup 3}CS)

    Energy Technology Data Exchange (ETDEWEB)

    Jung, C H; Kim, J T; Kwon, K C [Korea Atomic Energy Research Inst., Yusong, Taejon (Korea, Republic of)

    1997-07-01

    Nuclear power plants to guarantee the safety of public should be designed to reduce the operator intervention resulting in operating human errors, identify the process states in transients, and aid to make a decision of their tasks and guide operator actions. For the sake of this purpose, MMIS(MAN-Machine Interface System) in NPPs should be the integrated top-down approach tightly focused on the function-based task analysis including an advanced digital technology, an operator support function, and so on. The advanced I and C research team in KAERI has embarked on developing an Integrated Intelligent Instrumentation and Control System (I{sup 3}CS) for Korea`s next generation nuclear power plants. I{sup 3}CS bases the integrated top-down approach on the function-based task analysis, modern digital technology, standardization and simplification, availability and reliability, and protection of investment. (author). 4 refs, 6 figs.

  7. Those They Leave behind: Paternal Incarceration and Maternal Instrumental Support

    Science.gov (United States)

    Turney, Kristin; Schnittker, Jason; Wildeman, Christopher

    2012-01-01

    As the American imprisonment rate has risen, researchers have become increasingly concerned about the implications of mass imprisonment for family life. The authors extend this research by examining how paternal incarceration is linked to perceived instrumental support among the mothers of inmates' children. Results from the Fragile Families and…

  8. Factoring - financial instrument supporting the current activity of an enterprise

    Directory of Open Access Journals (Sweden)

    Dorota Czerwińska-Kayzer

    2009-01-01

    Full Text Available Small and medium enterprises have a difficult access to classic financial sources. Therefore the factoring could be a financial instrument supporting effective management of the liabilities. Factoring improves the financial situation of a company, first of all financial liquidity. Moreover, factoring improves structure of financial statement and creates a possibility of risk transfer of debtor insolvency on factor.

  9. Aircraft Wiring Support Equipment Integration Laboratory (AWSEIL)

    Data.gov (United States)

    Federal Laboratory Consortium — Purpose:The Aircraft Wiring Support Equipment Integration Laboratory (AWSEIL) provides a variety of research, design engineering and prototype fabrication services...

  10. Development of an instrument for the evaluation of advanced life support performance.

    Science.gov (United States)

    Peltonen, L-M; Peltonen, V; Salanterä, S; Tommila, M

    2017-10-01

    Assessing advanced life support (ALS) competence requires validated instruments. Existing instruments include aspects of technical skills (TS), non-technical skills (NTS) or both, but one instrument for detailed assessment that suits all resuscitation situations is lacking. This study aimed to develop an instrument for the evaluation of the overall ALS performance of the whole team. This instrument development study had four phases. First, we reviewed literature and resuscitation guidelines to explore items to include in the instrument. Thereafter, we interviewed resuscitation team professionals (n = 66), using the critical incident technique, to determine possible additional aspects associated with the performance of ALS. Second, we developed an instrument based on the findings. Third, we used an expert panel (n = 20) to assess the validity of the developed instrument. Finally, we revised the instrument based on the experts' comments and tested it with six experts who evaluated 22 video recorded resuscitations. The final version of the developed instrument had 69 items divided into adherence to guidelines (28 items), clinical decision-making (5 items), workload management (12 items), team behaviour (8 items), information management (6 items), patient integrity and consideration of laymen (4 items) and work routines (6 items). The Cronbach's α values were good, and strong correlations between the overall performance and the instrument were observed. The instrument may be useful for detailed assessment of the team's overall performance, but the numerous items make the use demanding. The instrument is still under development, and more research is needed to determine its psychometric properties. © 2017 The Acta Anaesthesiologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

  11. Design, development, and testing of the DCT Cassegrain instrument support assembly

    Science.gov (United States)

    Bida, Thomas A.; Dunham, Edward W.; Nye, Ralph A.; Chylek, Tomas; Oliver, Richard C.

    2012-09-01

    The 4.3m Discovery Channel Telescope delivers an f/6.1 unvignetted 0.5° field to its RC focal plane. In order to support guiding, wavefront sensing, and instrument installations, a Cassegrain instrument support assembly has been developed which includes a facility guider and wavefront sensor package (GWAVES) and multiple interfaces for instrumentation. A 2-element, all-spherical, fused-silica corrector compensates for field curvature and astigmatism over the 0.5° FOV, while reducing ghost pupil reflections to minimal levels. Dual roving GWAVES camera probes pick off stars in the outer annulus of the corrected field, providing simultaneous guiding and wavefront sensing for telescope operations. The instrument cube supports 5 co-mounted instruments with rapid feed selection via deployable fold mirrors. The corrected beam passes through a dual filter wheel before imaging with the 6K x 6K single CCD of the Large Monolithic Imager (LMI). We describe key development strategies for the DCT Cassegrain instrument assembly and GWAVES, including construction of a prime focus test assembly with wavefront sensor utilized in fall 2011 to begin characterization of the DCT primary mirror support. We also report on 2012 on-sky test results of wavefront sensing, guiding, and imaging with the integrated Cassegrain cube.

  12. Integrated Control System Engineering Support.

    Science.gov (United States)

    1984-12-01

    Advanced Medium Range Air to Air Missile ASTEC Advanced Speech Technology Experimental Configuration BA Body Axis BCIU Bus Control Interface Unit BMU Bus...support nreeded to tie an ASTEC speech recognition system into the DIGISYN fJcility and support an FIGR experiment designed to investigate the voice...information passed to the PDP computer consisted of integers which represented words or phrases recognized by the ASTEC recognition system. An interface

  13. Energy Production from Biogas: Competitiveness and Support Instruments in Latvia

    OpenAIRE

    Klāvs G.; Kundziņa A.; Kudrenickis I.

    2016-01-01

    Use of renewable energy sources (RES) might be one of the key factors for the triple win-win: improving energy supply security, promoting local economic development, and reducing greenhouse gas emissions. The authors ex-post evaluate the impact of two main support instruments applied in 2010-2014 – the investment support (IS) and the feed-in tariff (FIT) – on the economic viability of small scale (up to 2MWel) biogas unit. The results indicate that the electricity production cost in biogas ut...

  14. Energy Production from Biogas: Competitiveness and Support Instruments in Latvia

    Science.gov (United States)

    Klāvs, G.; Kundziņa, A.; Kudrenickis, I.

    2016-10-01

    Use of renewable energy sources (RES) might be one of the key factors for the triple win-win: improving energy supply security, promoting local economic development, and reducing greenhouse gas emissions. The authors ex-post evaluate the impact of two main support instruments applied in 2010-2014 - the investment support (IS) and the feed-in tariff (FIT) - on the economic viability of small scale (up to 2MWel) biogas unit. The results indicate that the electricity production cost in biogas utility roughly corresponds to the historical FIT regarding electricity production using RES. However, if in addition to the FIT the IS is provided, the analysis shows that the practice of combining both the above-mentioned instruments is not optimal because too high total support (overcompensation) is provided for a biogas utility developer. In a long-term perspective, the latter gives wrong signals for investments in new technologies and also creates unequal competition in the RES electricity market. To provide optimal biogas utilisation, it is necessary to consider several options. Both on-site production of electricity and upgrading to biomethane for use in a low pressure gas distribution network are simulated by the cost estimation model. The authors' estimates show that upgrading for use in a gas distribution network should be particularly considered taking into account the already existing infrastructure and technologies. This option requires lower support compared to support for electricity production in small-scale biogas utilities.

  15. Energy Production from Biogas: Competitiveness and Support Instruments in Latvia

    Directory of Open Access Journals (Sweden)

    Klāvs G.

    2016-10-01

    Full Text Available Use of renewable energy sources (RES might be one of the key factors for the triple win-win: improving energy supply security, promoting local economic development, and reducing greenhouse gas emissions. The authors ex-post evaluate the impact of two main support instruments applied in 2010-2014 – the investment support (IS and the feed-in tariff (FIT – on the economic viability of small scale (up to 2MWel biogas unit. The results indicate that the electricity production cost in biogas utility roughly corresponds to the historical FIT regarding electricity production using RES. However, if in addition to the FIT the IS is provided, the analysis shows that the practice of combining both the above-mentioned instruments is not optimal because too high total support (overcompensation is provided for a biogas utility developer. In a long-term perspective, the latter gives wrong signals for investments in new technologies and also creates unequal competition in the RES electricity market. To provide optimal biogas utilisation, it is necessary to consider several options. Both on-site production of electricity and upgrading to biomethane for use in a low pressure gas distribution network are simulated by the cost estimation model. The authors’ estimates show that upgrading for use in a gas distribution network should be particularly considered taking into account the already existing infrastructure and technologies. This option requires lower support compared to support for electricity production in small-scale biogas utilities.

  16. Instrument development in support of Falcon and Phebus-FP

    International Nuclear Information System (INIS)

    Bowsher, B.R.; Brunning, J.

    1992-12-01

    This review has been undertaken to identify various on-line instruments and post-test analytical techniques that may improve the quality of data from both the Falcon Integral Test Programme and Phebus-FP. Particular emphasis is placed on the use of in-situ techniques to provide mass-based data on the aerodynamic properties of the aerosol and fission product-surface interactions. The principles of the following techniques are reviewed: cascade impactors, tapered element oscillating microbalance, condensation nucleus counter, Knudsen cell mass spectrometry, diffuse reflectance infrared Fourier transform spectrometry and secondary-ion mass spectrometry. These methods are currently being used in the Falcon experimental programme. (author)

  17. IAEA integrated safeguards instrumentation program (I2SIP)

    International Nuclear Information System (INIS)

    Arlt, R.; Fortakov, V.; Gaertner, K.J.

    1995-01-01

    This article is a review of the IAEA integrated safeguards instrumentation program. The historical development of the program is outlined, and current activities are also noted. Brief technical descriptions of certain features are given. It is concluded that the results of this year's efforts in this area will provide significant input and be used to assess the viability of the proposed concepts and to decide on the directions to pursue in the future

  18. Design of the Local Instrument for KSTAR Gravity Support

    International Nuclear Information System (INIS)

    Her, N. I.; Kim, H. K.; Kim, Y. O.; Sa, J. W.; Kim, G. H.; Kim, K. M.; Park, Y. M.; Hong, G. H.; Choi, C. H.; Bak, J. S.

    2005-01-01

    The gravity support installed between the lower toroidal field (TF) coil cooled by 4.5 K supercritical helium and the cryostat base is the main support structure for the Korea Superconducting Tokamak Advanced Research (KSTAR) superconducting magnet system. This structure should be flexible to absorb thermal shrink of the magnet and also should be rigid to support the magnet weight and the plasma disruptions loads. The gravity support was designed with stainless steel 316LN and Carbon fiber Reinforced Plastics (CFRP) that has low thermal conductivity and high structural strength at low temperature. The fabrication of the support has been completed after engineering design. The gravity support is composed of one toroidal ring and eight supporting posts as shown in Figure 1. The toroidal ring and post are cooled by 4.5 K supercritical helium and 77 K gaseous helium, respectively. The overall dimension of the post is 1 m height and 0.8 m width and depth, respectively. The post is composed of upper block, inner CFRP plate, lower block, flexible plate, thermal anchor block, outer CFRP plate, base block, and strengthen plate. Inner CFRP plate is connected to the upper and lower block using the pin. And the outer CFRP plate is connected to the thermal anchor block and the base block. Inner and outer CFRP plates consist of four and two 20 mm thin plates, respectively. Flexible plates consist of four 8 mm thin stainless steel plates to absorb the magnet shrinkage. These plates are assembled into the thermal anchor block and lower block. The fabrication of the gravity support initiated October 2002 has been completed in October 2003. The supporting post and toroidal ring were fabricated at shop individually and assembled at site. Various of static and dynamic loads will increase the stress level of the structure during the cool-down and plasma operation. After fabrication of the structure, we designed an instrumentation system to monitoring the structural safety. This system

  19. Instrumentation

    Energy Technology Data Exchange (ETDEWEB)

    Decreton, M

    2001-04-01

    SCK-CEN's research and development programme on instrumentation involves the assessment and the development of sensitive measurement systems used within a radiation environment. Particular emphasis is on the assessment of optical fibre components and their adaptability to radiation environments. The evaluation of ageing processes of instrumentation in fission plants, the development of specific data evaluation strategies to compensate for ageing induced degradation of sensors and cable performance form part of these activities. In 2000, particular emphasis was on in-core reactor instrumentation applied to fusion, accelerator driven and water-cooled fission reactors. This involved the development of high performance instrumentation for irradiation experiments in the BR2 reactor in support of new instrumentation needs for MYRRHA, and for diagnostic systems for the ITER reactor.

  20. Instrumentation

    International Nuclear Information System (INIS)

    Decreton, M.

    2001-01-01

    SCK-CEN's research and development programme on instrumentation involves the assessment and the development of sensitive measurement systems used within a radiation environment. Particular emphasis is on the assessment of optical fibre components and their adaptability to radiation environments. The evaluation of ageing processes of instrumentation in fission plants, the development of specific data evaluation strategies to compensate for ageing induced degradation of sensors and cable performance form part of these activities. In 2000, particular emphasis was on in-core reactor instrumentation applied to fusion, accelerator driven and water-cooled fission reactors. This involved the development of high performance instrumentation for irradiation experiments in the BR2 reactor in support of new instrumentation needs for MYRRHA, and for diagnostic systems for the ITER reactor

  1. Teacher Support in Learning: Instrumental and Appraisal Support in Relation to Math Achievement

    Science.gov (United States)

    Wong, Tracy K. Y.; Tao, Xi; Konishi, Chiaki

    2018-01-01

    This study explored the extent to which teachers' instrumental (i.e., tangible aid to promote learning) and appraisal support (i.e., teacher feedback) enhanced students' achievement in mathematics. Participants included 13,950 fifteen-year-old Canadian students who participated in the 2012 Programme for International Student Assessment. Based on…

  2. Remote Monitoring and Instrumentation Strategies for Integral Reactors

    International Nuclear Information System (INIS)

    Upadhyaya, Belle R.; Lish, Matthew R.; Tarver, Rayan A.; Hines, J. Wesley

    2014-01-01

    The University of Tennessee is engaged in research and development projects related to instrumentation and controls for small modular reactors (SMR) and integral pressurized water reactors (iPWR). The approach incorporates the deployment of physics-based models for control design and parameter estimation, development of noncontact sensors for flow monitoring, and placement of sensors to maximize fault detection and isolation. The results of research and development illustrate the feasibility of sensor location in space-constrained environment. Major issues and challenges in I and C design are addressed

  3. Remote Monitoring and Instrumentation Strategies for Integral Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Upadhyaya, Belle R.; Lish, Matthew R.; Tarver, Rayan A.; Hines, J. Wesley [University of Tennessee, Knoxville (United States)

    2014-08-15

    The University of Tennessee is engaged in research and development projects related to instrumentation and controls for small modular reactors (SMR) and integral pressurized water reactors (iPWR). The approach incorporates the deployment of physics-based models for control design and parameter estimation, development of noncontact sensors for flow monitoring, and placement of sensors to maximize fault detection and isolation. The results of research and development illustrate the feasibility of sensor location in space-constrained environment. Major issues and challenges in I and C design are addressed.

  4. Project of an integrated calibration laboratory of instruments at IPEN

    International Nuclear Information System (INIS)

    Barros, Gustavo Adolfo San Jose

    2009-01-01

    The Calibration Laboratory of Instruments of Instituto de Pesquisas Energeticas e Nucleares offers calibration services of radiation detectors used in radioprotection, diagnostic radiology and radiotherapy, for IPEN and for external facilities (public and private). One part of its facilities is located in the main building, along with other laboratories and study rooms, and another part in an isolated building called Bunker. For the optimization, modernization and specially the safety, the laboratories in the main building shall be transferred to an isolated place. In this work, a project of an integrated laboratory for calibration of instruments was developed, and it will be an expansion of the current Calibration Laboratory of Instruments of IPEN. Therefore, a series of radiometric monitoring of the chosen localization of the future laboratory was realized, and all staff needs (dimensions and disposition of the study rooms and laboratories) were defined. In this project, the laboratories with X ray equipment, alpha and beta radiation sources were located at an isolated part of the building, and the wall shielding was determined, depending on the use of each laboratory. (author)

  5. [Research on medical instrument information integration technology based on IHE PCD].

    Science.gov (United States)

    Zheng, Jianli; Liao, Yun; Yang, Yongyong

    2014-06-01

    Integrating medical instruments with medical information systems becomes more and more important in healthcare industry. To make medical instruments without standard communication interface possess the capability of interoperating and sharing information with medical information systems, we developed a medical instrument integration gateway based on Integrating the Healthcare Enterprise Patient Care Device (IHE PCD) integration profiles in this research. The core component is an integration engine which is implemented according to integration profiles and Health Level Seven (HL7) messages defined in IHE PCD. Working with instrument specific Javascripts, the engine transforms medical instrument data into HL7 ORU message. This research enables medical instruments to interoperate and exchange medical data with information systems in a standardized way, and is valuable for medical instrument integration, especially for traditional instruments.

  6. ECLSS Integration Analysis: Advanced ECLSS Subsystem and Instrumentation Technology Study for the Space Exploration Initiative

    Science.gov (United States)

    1990-01-01

    In his July 1989 space policy speech, President Bush proposed a long range continuing commitment to space exploration and development. Included in his goals were the establishment of permanent lunar and Mars habitats and the development of extended duration space transportation. In both cases, a major issue is the availability of qualified sensor technologies for use in real-time monitoring and control of integrated physical/chemical/biological (p/c/b) Environmental Control and Life Support Systems (ECLSS). The purpose of this study is to determine the most promising instrumentation technologies for future ECLSS applications. The study approach is as follows: 1. Precursor ECLSS Subsystem Technology Trade Study - A database of existing and advanced Atmosphere Revitalization (AR) and Water Recovery and Management (WRM) ECLSS subsystem technologies was created. A trade study was performed to recommend AR and WRM subsystem technologies for future lunar and Mars mission scenarios. The purpose of this trade study was to begin defining future ECLSS instrumentation requirements as a precursor to determining the instrumentation technologies that will be applicable to future ECLS systems. 2. Instrumentation Survey - An instrumentation database of Chemical, Microbial, Conductivity, Humidity, Flowrate, Pressure, and Temperature sensors was created. Each page of the sensor database report contains information for one type of sensor, including a description of the operating principles, specifications, and the reference(s) from which the information was obtained. This section includes a cursory look at the history of instrumentation on U.S. spacecraft. 3. Results and Recommendations - Instrumentation technologies were recommended for further research and optimization based on a consideration of both of the above sections. A sensor or monitor technology was recommended based on its applicability to future ECLS systems, as defined by the ECLSS Trade Study (1), and on whether its

  7. DATYS integrates piping and supports engineering

    International Nuclear Information System (INIS)

    Rendon, J.G.; Fraile, A.R.

    1990-01-01

    Empresarios Agrupados of Spain has developed an interactive software package which computerizes and integrates the whole range of tasks involved in pipework engineering; including drawing, design, analysis and support calculations. Its strength lies in its modularity and in the ability to re-evaluate and modify existing projects. (author)

  8. ACADEMIC INTEGRITY SUPPORT SYSTEM FOR UKRAINIAN UNIVERSITIES

    Directory of Open Access Journals (Sweden)

    V. G. Sherstjuk

    2017-04-01

    Full Text Available Purpose. Developing the methodology for providing academic integrity in the university. The methodology is based on Web-oriented academic integrity support system, developed by the authors, which enters into the information system of learning process control. Academic integrity support system is aimed at maintaining academic integrity as a basic institutional value, which will help to reduce corruption, plagiarism and other types of academic dishonesty. Methodology. The methodology of problem to solve is based on the development of the information system of education process control with the integral elements of quality control. The information subsystem of academic integrity support is its basic part. Findings. The proposed information system allows us to fulfill the following levels: educational process monitoring; audit of internal processes, which is necessary for developing the effective quality control system; assessment of achievements of educational process participants; formalization of the interaction of educational process participants. The system is aimed at the development of new academic society based on the following principles: open access to the information, at which the access of wide audience to the information provides participation, forming the sense of responsibility and social control; transparency of the information, by which its relevance, quality, reliability are meant; responsibility of all members of educational process; measurability, at which any action in educational process should be measured; detail of describing the actions, results and processes; support, which is meant by automatic tools of the realization of the principles of open access to the information, transparency of the information, responsibility of all participants of educational process, measurability, detail, support. The practical realization of information system is based on the development of a common repository of university information. The

  9. Wavefront-Error Performance Characterization for the James Webb Space Telescope (JWST) Integrated Science Instrument Module (ISIM) Science Instruments

    Science.gov (United States)

    Aronstein, David L.; Smith, J. Scott; Zielinski, Thomas P.; Telfer, Randal; Tournois, Severine C.; Moore, Dustin B.; Fienup, James R.

    2016-01-01

    The science instruments (SIs) comprising the James Webb Space Telescope (JWST) Integrated Science Instrument Module (ISIM) were tested in three cryogenic-vacuum test campaigns in the NASA Goddard Space Flight Center (GSFC)'s Space Environment Simulator (SES). In this paper, we describe the results of optical wavefront-error performance characterization of the SIs. The wavefront error is determined using image-based wavefront sensing (also known as phase retrieval), and the primary data used by this process are focus sweeps, a series of images recorded by the instrument under test in its as-used configuration, in which the focal plane is systematically changed from one image to the next. High-precision determination of the wavefront error also requires several sources of secondary data, including 1) spectrum, apodization, and wavefront-error characterization of the optical ground-support equipment (OGSE) illumination module, called the OTE Simulator (OSIM), 2) plate scale measurements made using a Pseudo-Nonredundant Mask (PNRM), and 3) pupil geometry predictions as a function of SI and field point, which are complicated because of a tricontagon-shaped outer perimeter and small holes that appear in the exit pupil due to the way that different light sources are injected into the optical path by the OGSE. One set of wavefront-error tests, for the coronagraphic channel of the Near-Infrared Camera (NIRCam) Longwave instruments, was performed using data from transverse translation diversity sweeps instead of focus sweeps, in which a sub-aperture is translated andor rotated across the exit pupil of the system.Several optical-performance requirements that were verified during this ISIM-level testing are levied on the uncertainties of various wavefront-error-related quantities rather than on the wavefront errors themselves. This paper also describes the methodology, based on Monte Carlo simulations of the wavefront-sensing analysis of focus-sweep data, used to establish the

  10. Integrated intelligent instruments using supercritical fluid technology for soil analysis

    International Nuclear Information System (INIS)

    Liebman, S.A.; Phillips, C.; Fitzgerald, W.; Levy, E.J.

    1994-01-01

    Contaminated soils pose a significant challenge for characterization and remediation programs that require rapid, accurate and comprehensive data in the field or laboratory. Environmental analyzers based on supercritical fluid (SF) technology have been designed and developed for meeting these global needs. The analyzers are designated the CHAMP Systems (Chemical Hazards Automated Multimedia Processors). The prototype instrumentation features SF extraction (SFE) and on-line capillary gas chromatographic (GC) analysis with chromatographic and/or spectral identification detectors, such as ultra-violet, Fourier transform infrared and mass spectrometers. Illustrations are given for a highly automated SFE-capillary GC/flame ionization (FID) configuration to provide validated screening analysis for total extractable hydrocarbons within ca. 5--10 min, as well as a full qualitative/quantitative analysis in 25--30 min. Data analysis using optional expert system and neural networks software is demonstrated for test gasoline and diesel oil mixtures in this integrated intelligent instrument approach to trace organic analysis of soils and sediments

  11. Development of a PC-based ground support system for a small satellite instrument

    Science.gov (United States)

    Deschambault, Robert L.; Gregory, Philip R.; Spenler, Stephen; Whalen, Brian A.

    1993-11-01

    The importance of effective ground support for the remote control and data retrieval of a satellite instrument cannot be understated. Problems with ground support may include the need to base personnel at a ground tracking station for extended periods, and the delay between the instrument observation and the processing of the data by the science team. Flexible solutions to such problems in the case of small satellite systems are provided by using low-cost, powerful personal computers and off-the-shelf software for data acquisition and processing, and by using Internet as a communication pathway to enable scientists to view and manipulate satellite data in real time at any ground location. The personal computer based ground support system is illustrated for the case of the cold plasma analyzer flown on the Freja satellite. Commercial software was used as building blocks for writing the ground support equipment software. Several levels of hardware support, including unit tests and development, functional tests, and integration were provided by portable and desktop personal computers. Satellite stations in Saskatchewan and Sweden were linked to the science team via phone lines and Internet, which provided remote control through a central point. These successful strategies will be used on future small satellite space programs.

  12. Effective management of changes: methodological and instrumental support

    Directory of Open Access Journals (Sweden)

    G. S. Merzlikina

    2017-01-01

    instrumental support for the successful implementation of management decisions of the change management model.

  13. Students' Perceptions of Emotional and Instrumental Teacher Support: Relations with Motivational and Emotional Responses

    Science.gov (United States)

    Federici, Roger A.; Skaalvik, Einar M.

    2014-01-01

    We explored whether students' perceptions of emotional and instrumental support provided by their mathematics teacher constitute separate dimensions of teacher support and how they are related. We also analyzed how students' perceptions of emotional and instrumental support in math lessons relate to math anxiety, intrinsic motivation, help-seeking…

  14. Integrated project support environments the ASPECT project

    CERN Document Server

    Brown, Alan W

    1991-01-01

    A major part of software engineering developments involve the use of computing tools which facilitate the management, maintenance, security, and building of long-scale software engineer projects. Consequently, there have been a proliferation of CASE tools and IPSES. This book looks at IPSES in general and the ASPECT project in particular, providing design and implementation details, as well as locating ASPECT in IPSE developments.Survey of integrated project support environments for more efficient software engineering**Description of a large scale IPSE--ASPECT**Evaluation of formal methods in

  15. Integrated Nuclear Security Support Plan (INSSP)

    International Nuclear Information System (INIS)

    Moore, G.M.

    2010-01-01

    Integrated Nuclear Security Support Plan (INSSP) purposes the framework for a comprehensive approach to addressing specific national security needs. It provides means for coordinating nuclear security assistance to member states. Identifies responsible parties for completion of nuclear security activities which are necessary to build sustainable nuclear security programs. International Atomic Energy Agency INSSP development process is based on findings and recommendations from a range of nuclear security missions and other information needs assessments. Takes into account of the ongoing work activities of other bilateral assistance.

  16. Instrumentation and Controls Division, Technical Support Department Management Plan, FY 1993--FY 1996

    Energy Technology Data Exchange (ETDEWEB)

    Adkisson, B.P.; Kunselman, C.W.; Effler, R.P.; Miller, D.R.; Millet, A.J.; Stansberry, C.T.

    1993-08-01

    This report describes the organization, key functions, and major activities of the Technical Support Department The Department is the programmatic support element of the Instrumentation and Controls Division. The Department`s primary focus is the support of existing equipment and systems at Oak Ridge National Laboratory that are generally characterized as instrumentation and controls. The support takes the form of repair, calibration, fabrication, field engineering, preventive maintenance, software support, and record keeping.

  17. Should different impact assessment instruments be integrated? Evidence from English spatial planning

    International Nuclear Information System (INIS)

    Tajima, Ryo; Fischer, Thomas B.

    2013-01-01

    This paper aims at providing empirical evidence to the question as to whether integration of different instruments is achieving its aim in supporting sustainable decision making, focusing on SEA inclusive sustainability appraisal (SA) and other impact assessments (IAs) currently used in English spatial planning. Usage of IAs in addition to SA is established and an analysis of the integration approach (in terms of process, output, and assessor) as well as its effectiveness is conducted. It is found that while integration enhances effectiveness to some extent, too much integration, especially in terms of the procedural element, appears to diminish the overall effectiveness of each IA in influencing decisions as they become captured by the balancing function of SA. -- Highlights: ► The usage of different impact assessments in English spatial planning is clarified. ► The relationship between integration approach and effectiveness is analyzed. ► Results suggest that integration does not necessarily lead to more sustainable decisions. ► Careful consideration is recommended upon process integration

  18. Should different impact assessment instruments be integrated? Evidence from English spatial planning

    Energy Technology Data Exchange (ETDEWEB)

    Tajima, Ryo, E-mail: tajima.ryo@nies.go.jp [Interdisciplinary Graduate School of Science and Engineering, Tokyo Institute of Technology, 4259-G5-9 Nagatsuta-cho, Midori-ku, Yokoyama City, Kanagawa, 226-8502 (Japan); Fischer, Thomas B., E-mail: fischer@liverpool.ac.uk [Department of Geography and Planning, School of Environmental Sciences, University of Liverpool, 74 Bedford Street South, Liverpool L69 7ZQ (United Kingdom)

    2013-07-15

    This paper aims at providing empirical evidence to the question as to whether integration of different instruments is achieving its aim in supporting sustainable decision making, focusing on SEA inclusive sustainability appraisal (SA) and other impact assessments (IAs) currently used in English spatial planning. Usage of IAs in addition to SA is established and an analysis of the integration approach (in terms of process, output, and assessor) as well as its effectiveness is conducted. It is found that while integration enhances effectiveness to some extent, too much integration, especially in terms of the procedural element, appears to diminish the overall effectiveness of each IA in influencing decisions as they become captured by the balancing function of SA. -- Highlights: ► The usage of different impact assessments in English spatial planning is clarified. ► The relationship between integration approach and effectiveness is analyzed. ► Results suggest that integration does not necessarily lead to more sustainable decisions. ► Careful consideration is recommended upon process integration.

  19. Instrumentation and control activities at the electric power research institute to support computerized support systems

    International Nuclear Information System (INIS)

    Naser, J.

    1996-01-01

    Most nuclear power plants in the United States are operating with their original analog I and C equipment. This equipment requires increasing maintenance efforts to sustain systems performance. Decreasing availability of replacement parts and support organization for analog technology accentuate obsolescence problems and resultant O and M cost increases. Modern technology, especially digital systems, offers improved functionality, performance, and reliability; solutions to obsolescence of equipment; reduction in O and M costs; and the potential to enhance safety. Digital systems, including computerized support systems, with their inherent advantages will be implemented only if reliable and cost-effective implementation and licensing acceptance is achieved and if the upgraded systems supports reduced power production costs. EPRI and its member utilities are working together under the Integrated I and C Upgrade Initiative to address I and C issues. (author). 23 refs

  20. Critical Science Instrument Alignment of the James Webb Space Telescope (JWST) Integrated Science Instrument Module (ISIM)

    Science.gov (United States)

    Rohrbach, Scott O.; Kubalak, David A.; Gracey, Renee M.; Sabatke, Derek S.; Howard, Joseph M.; Telfer, Randal C.; Zielinski, Thomas P.

    2016-01-01

    This paper describes the critical instrument alignment terms associated with the six-degree of freedom alignment of each the Science Instrument (SI) in the James Webb Space Telescope (JWST), including focus, pupil shear, pupil clocking, and boresight. We present the test methods used during cryogenic-vacuum tests to directly measure the performance of each parameter, the requirements levied on each, and the impact of any violations of these requirements at the instrument and Observatory level.

  1. Instrument Development of Integrative Health and Wellness Assessment™.

    Science.gov (United States)

    McElligott, Deborah; Eckardt, Sarah; Montgomery Dossey, Barbara; Luck, Susan; Eckardt, Patricia

    2017-12-01

    The nurse coach role was developed to address the needs of our nation and the world for health and wellbeing. The Theory of Integrative Nurse Coaching provides a foundation for coaching interventions supporting health promotion, and a framework for the development of the Integrative Health and Wellness Assessment (IHWA) short form. This 36-question Likert-type scale self-reporting tool assists participants in assessing healthy behaviors through a self-reflection process, provides information for the coaching relationship, and may be an outcome measurement. This article describes the history of the IHWA tool and the development and pilot testing of the IHWA short form using guidelines provided by DeVellis. Results of the Kaiser-Meyer-Olkin test yielded a value of .520, and the Bartlett's test of sphericity was significant. Cronbach's alpha overall scale internal consistency was .88 ( n = 36). Pilot study results indicate that the scale could be improved through additional revision, and an ongoing study is in progress.

  2. WFIRST: Data/Instrument Simulation Support at IPAC

    Science.gov (United States)

    Laine, Seppo; Akeson, Rachel; Armus, Lee; Bennett, Lee; Colbert, James; Helou, George; Kirkpatrick, J. Davy; Meshkat, Tiffany; Paladini, Roberta; Ramirez, Solange; Wang, Yun; Xie, Joan; Yan, Lin

    2018-01-01

    As part of WFIRST Science Center preparations, the IPAC Science Operations Center (ISOC) maintains a repository of 1) WFIRST data and instrument simulations, 2) tools to facilitate scientific performance and feasibility studies using the WFIRST, and 3) parameters summarizing the current design and predicted performance of the WFIRST telescope and instruments. The simulation repository provides access for the science community to simulation code, tools, and resulting analyses. Examples of simulation code with ISOC-built web-based interfaces include EXOSIMS (for estimating exoplanet yields in CGI surveys) and the Galaxy Survey Exposure Time Calculator. In the future the repository will provide an interface for users to run custom simulations of a wide range of coronagraph instrument (CGI) observations and sophisticated tools for designing microlensing experiments. We encourage those who are generating simulations or writing tools for exoplanet observations with WFIRST to contact the ISOC team so we can work with you to bring these to the attention of the broader astronomical community as we prepare for the exciting science that will be enabled by WFIRST.

  3. Technical Support Section Instrument Support Program for nuclear and nonnuclear facilities with safety requirements

    International Nuclear Information System (INIS)

    Adkisson, B.P.; Allison, K.L.

    1995-01-01

    This document describes requirements, procedures, and supervisory responsibilities of the Oak Ridge National Laboratory (ORNL) Instrumentation and Controls (I ampersand C) Division's Technical Support Section (TSS) for instrument surveillance and maintenance in nonreactor nuclear facilities having identified Operational Safety Requirements (OSRs) or Limiting Conditions Document (LCDs). Implementation of requirements comply with the requirements of U.S. Department of Energy (DOE) Orders 5480.5, 5480.22, and 5481.1B; Martin Marietta Energy Systems, Inc. (Energy Systems), Policy Procedure ESS-FS-201; and ORNL SPP X-ESH-15. OSRs and LCDs constitute an agreement or contract between DOE and the facility operating management regarding the safe operation of the facility. One basic difference between OSRs and LCDs is that violation of an OSR is considered a Category II occurrence, whereas violation of an LCD requirement is considered a Category III occurrence (see Energy Systems Standard ESS-OP-301 and ORNL SPP X-GP-13). OSRs are required for high- and moderate-hazard nuclear facilities, whereas the less-rigorous LCDs are required for low-hazard nuclear facilities and selected open-quotes generally acceptedclose quotes operations. Hazard classifications are determined through a hazard screening process, which each division conducts for its facilities

  4. Neighborhood Disadvantage, Residential Stability, and Perceptions of Instrumental Support among New Mothers

    Science.gov (United States)

    Turney, Kristin; Harknett, Kristen

    2010-01-01

    Using longitudinal data from the Fragile Families and Child Wellbeing survey (N = 4,211), this study examines neighborhood disadvantage and perceptions of instrumental support among mothers with young children. The authors find that (a) living in a disadvantaged neighborhood is associated with less instrumental support, particularly financial…

  5. Integrated Project Control and Technical Support

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jun Yeon; Joo, Po Kook; Kim, Gye Ryung (and others)

    2003-06-15

    First, Since PEFP puts it's aim on technology innovation through collaboration and technological fusion among the subprojects from the various fields, It has been tried to make the subprojects consist with the goal of the whole project through building and running the integrated project control system. Also, adopting CPM(Critical Process Management), intensive process management framework has been founded. Secondly, for the every procedure, including purchase, building, installation and a trial running, license, quality control, etc., could be efficiently executed, every related task has been carried out. And, the tasks involved in international cooperative relationship and host site selection are carried out as well, so that PEFP could be firmly supported. Finally, TRM(Technology Road Map) is made up not only for the purpose of managing efficiency and effectiveness on the investment, but also for the purpose of life cycle management from developing stage to commercializing stage.

  6. Learning a Musical Instrument: The Case for Parental Support

    Science.gov (United States)

    Creech, Andrea

    2010-01-01

    The aims of this research were to identify the ways in which parents may most constructively support their children's musical development, and to ascertain whether styles of parent-teacher and parent-pupil interaction would influence the extent to which parents engage in different types of supportive behaviours. A model of parent involvement as…

  7. Instrumentation: Nondestructive Examination for Verification of Canister and Cladding Integrity. FY2014 Status Update

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, Ryan M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Suter, Jonathan D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Jones, Anthony M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2014-09-12

    This report documents FY14 efforts for two instrumentation subtasks under storage and transportation. These instrumentation tasks relate to developing effective nondestructive evaluation (NDE) methods and techniques to (1) verify the integrity of metal canisters for the storage of used nuclear fuel (UNF) and to (2) verify the integrity of dry storage cask internals.

  8. Perceived overprotection, instrumental support and rehabilitation use in elders with vision loss: a longitudinal perspective.

    Science.gov (United States)

    Cimarolli, Verena R; Boerner, Kathrin; Reinhardt, Joann P; Horowitz, Amy

    2013-01-01

    This study's purpose was to investigate changes in perceived overprotection - a problematic aspect of close relationships - over time in relationship to instrumental support receipt and vision rehabilitation service use in a sample of older adults with vision impairment. Participants were 584 older adults with chronic vision impairment who were interviewed three times over a 12-month period. Longitudinal data were analysed using a latent growth curve methodology to examine change over time in perceived overprotection and instrumental support in relation to vision rehabilitation service use. Self-reported levels of overprotection and receipt of instrumental support. Results. Over time perceived overprotection increased but not instrumental support. While perceived overprotection was positively associated with instrumental support initially, over time this relationship did not emerge. Perceived overprotection and instrumental support functioned as predictors of vision rehabilitation hours. However, over time vision rehabilitation service use did not influence these social supports. Perceived overprotection increases over time, yet this change is unaffected by rehabilitation service use and instrumental support. Both family members and elders need to be involved in the vision rehabilitation process and educated about how some level of independence can be regained.

  9. Instrumental support in the physical activity community - premilinary results

    NARCIS (Netherlands)

    Elloumi, Lamia; Zhang, Qiwen; van Beijnum, Bernhard J.F.; Hermens, Hermanus J.

    Currently, we witness the growth of ICT-mediated solutions for chronic diseases management, especially to assist and support patients in lifestyle changes in order to improve their health condition. Being physically active is one the recommended lifestyle changes for patients with chronic diseases.

  10. Integrated Project Control and Technical Support

    International Nuclear Information System (INIS)

    Kim, Jun Yeon; Kim, Jun Yeon; Joo, Po Kook and others

    2005-08-01

    First, Since PEFP puts it's aim on technology innovation through collaboration and technological fusion among the sub-projects from the various fields. It has been tried to make the sub-projects consist with the goal of the whole project through building and running the integrated project control system. Also, adopting CPM(Critical Process Management), intensive process management framework has been founded. Secondly, for the every procedure, including purchase, building, installation and a trial running, license, quality control, etc., could be efficiently executed, every related task has been carried out. And, the tasks involved in international cooperative relationship and host site selection are carried out as well, so that PEFP could be firmly supported. Finally, Strategic management procedures including TRM(Technology Road Map), economic evaluation on PEFP, preliminary evaluation on company-involved R and D and TRESIS(Technology, Resources, Economic Evaluation System) are made up not only for the purpose of managing efficiency and effectiveness on the investment, but also for the purpose of life cycle management from developing stage to commercializing stage

  11. Integrated Project Control and Technical Support

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jun Yeon; Kim, Jun Yeon; Joo, Po Kook and others

    2005-08-15

    First, Since PEFP puts it's aim on technology innovation through collaboration and technological fusion among the sub-projects from the various fields. It has been tried to make the sub-projects consist with the goal of the whole project through building and running the integrated project control system. Also, adopting CPM(Critical Process Management), intensive process management framework has been founded. Secondly, for the every procedure, including purchase, building, installation and a trial running, license, quality control, etc., could be efficiently executed, every related task has been carried out. And, the tasks involved in international cooperative relationship and host site selection are carried out as well, so that PEFP could be firmly supported. Finally, Strategic management procedures including TRM(Technology Road Map), economic evaluation on PEFP, preliminary evaluation on company-involved R and D and TRESIS(Technology, Resources, Economic Evaluation System) are made up not only for the purpose of managing efficiency and effectiveness on the investment, but also for the purpose of life cycle management from developing stage to commercializing stage.

  12. An infrastructure for the integration of geoscience instruments and sensors on the Grid

    Science.gov (United States)

    Pugliese, R.; Prica, M.; Kourousias, G.; Del Linz, A.; Curri, A.

    2009-04-01

    ). In this paper i) we define the need for integration of instrumentation in the Grid, ii) we introduce the solution of the Instrument Element, iii) we demonstrate a suitable end-user web portal for accessing Grid resources, iv) we describe from the Grid-technological point of view the process of the integration to the Grid of two advanced environmental monitoring devices. References [1] M. Surridge, S. Taylor, D. De Roure, and E. Zaluska, "Experiences with GRIA—Industrial Applications on a Web Services Grid," e-Science and Grid Computing, First International Conference on e-Science and Grid Computing, 2005, pp. 98-105. [2] A. Chervenak, I. Foster, C. Kesselman, C. Salisbury, and S. Tuecke, "The data grid: Towards an architecture for the distributed management and analysis of large scientific datasets," Journal of Network and Computer Applications, vol. 23, 2000, pp. 187-200. [3] B. Allcock, J. Bester, J. Bresnahan, A.L. Chervenak, I. Foster, C. Kesselman, S. Meder, V. Nefedova, D. Quesnel, and S. Tuecke, "Data management and transfer in high-performance computational grid environments," Parallel Computing, vol. 28, 2002, pp. 749-771. [4] E. Frizziero, M. Gulmini, F. Lelli, G. Maron, A. Oh, S. Orlando, A. Petrucci, S. Squizzato, and S. Traldi, "Instrument Element: A New Grid component that Enables the Control of Remote Instrumentation," Proceedings of the Sixth IEEE International Symposium on Cluster Computing and the Grid (CCGRID'06)-Volume 00, IEEE Computer Society Washington, DC, USA, 2006. [5] R. Ranon, L. De Marco, A. Senerchia, S. Gabrielli, L. Chittaro, R. Pugliese, L. Del Cano, F. Asnicar, and M. Prica, "A Web-based Tool for Collaborative Access to Scientific Instruments in Cyberinfrastructures." 1 The DORII project is supported by the European Commission within the 7th Framework Programme (FP7/2007-2013) under grant agreement no. RI-213110. URL: http://www.dorii.eu 2 Istituto Nazionale di Oceanografia e di Geofisica Sperimentale. URL: http://www.ogs.trieste.it

  13. Assessing the performance of renewable electricity support instruments

    International Nuclear Information System (INIS)

    Verbruggen, Aviel; Lauber, Volkmar

    2012-01-01

    The performance of feed-in tariffs and tradable certificates is assessed on criteria of efficacy, efficiency, equity and institutional feasibility. In the early stage of transition to an energy system based entirely on renewable energy supplies, renewable electricity can only thrive if support takes into account the specific technical, economic and political problems which result from embedding this electricity in conventional power systems whose technology, organizational structure, environmental responsibility and general mission differ profoundly from the emerging, renewable-based system. Support schemes need to capture the diversity of power supplies, the variable nature of some renewable supplies, and their different attributes for the purposes of public policy. They must take into account the variety of generators – including small, decentralized generation – emerging in a renewable-based system, and the new relationships between generators and customers. Renewable energy policies need a clear point of reference: because the incumbent power systems are not sustainable they must adapt to the requirements of the renewable ones, not the other way round. Incumbent systems carry the responsibility of paying the transition, something that corresponds best with the polluter pays principle. - Highlights: ► Present power systems must adapt to the requirements of growing renewable ones, not the opposite. ► Well performing support systems capture the diversity of renewable sources and technologies. ► Feed-in Tariffs are superior in addressing the renewables' diversity and in promoting innovation. ► Feed-in Tariffs put transition burdens on incumbents and stimulate independent producers.

  14. Ghana's Integrated Nuclear Security Support Plan

    International Nuclear Information System (INIS)

    Dahlstrom, Danielle

    2013-01-01

    At the Korle Bu Teaching Hospital outside Accra, Pearl Lovelyn Lawson checks the records of the next patient to undergo radiotherapy and adjusts the dose settings of the teletherapy machine. It is business as usual at the facility that treats over fifty patients each day. But Lawson's routine now includes additional procedures to ensure that the highly radioactive cobalt-60 source located inside the machine remains secure. Nuclear security devices and systems such as double locks, motion sensors, and cameras that transmit images to a central alarm system have been installed to ensure that the source cannot be stolen, the facility sabotaged, or unauthorized access gained. At Korle Bu physical protection measures were upgraded as part of Ghana's Integrated Nuclear Security Support Plan (INSSP). Preventing, detecting and responding to criminal acts like the theft or illegal transfer of a radioactive source, is an international priority that could be addressed through an INSSP. As one of its key nuclear security services, the IAEA assists Member States in drafting such plans. An INSSP is developed jointly with the Member State, using a holistic approach to nuclear security capacity building. It reinforces the primary objective of a State's nuclear security regime to protect people, society, and the environment from the harmful consequences of a nuclear security event. Addressing five components - the legal and regulatory framework, prevention, detection, and sustainability - the jointly developed plan identifies the needs, responsible entities and organizations within the State, as well as the timeframe for the implementation of agreed nuclear security related activities. Ghana's INSSP, tailored to its specific needs, is based on findings and recommendations from advisory service missions carried out in Ghana, including an International Nuclear Security Advisory Service mission and an International Physical Protection Advisory Service mission. Ghana's INSSP was

  15. Cognitive visualization as a support instrument by individual education

    Directory of Open Access Journals (Sweden)

    V. A. Uglev

    2014-01-01

    Full Text Available The process of individual education, as the most effective form of gaining domain knowledge can be intensified through the organizational methods (involving a tutor, hardware (using computing technology, and psychological techniques (in particular, applying a cognitive visual representation. Of particular interest is a combination of traditional and computer-aided tutor support for individualized learning approaches based on the specific means of mapping.A tutor is an intermediary between a student (pupil and a teacher or between a student and a knowledge source in case of self-learning to orient the educational process to the student's personal goals and implement the L. S. Vygotsky's mediation principle. Thus, the tutor faces a task to identify the personal learning goals, disclose the learning prospects and its supports, but the student plays a role of a decision-maker. One of the nuclear problems of tutorage is making an individual educational or didactic path, which expects making a kind of distinctive cognition route.An application of cognitive visualization as a tutor's tools, is aimed, primarily, at a comprehensive representation of subjective educational student's space. A student has to be oriented inside this space to reach the denoted goals. In this context it is possible to formulate the navigation problem, which may be solved it in the most rational way by educational space mapping and navigating in it at any moment of the educational process. All three basic qualities of maps (the presence of different spatial objects in the corresponding metric, vector and scale can be usefully applied to support an individualized learning process.The paper shows that personality-resource maps can be used for describing the learning situation and building an individual study program in graphical form when the specifics of direct individualized learning is taken into account. Performing both the implementation function and the signum one, a

  16. Creating Efficient Instrumentation Networks to Support Parametric Risk Transfer

    Science.gov (United States)

    Rockett, P.

    2009-04-01

    instrumentation. For example, even along the US coast, National Weather Service windspeed recorders are not designed to withstand the most intense hurricane winds, and with only 30 minutes of battery life, fail to record through major storms with their ubiquitous power outages. New, privately financed, windspeed recording networks are now being installed that are hurricane resistant and have long-life batteries to ensure that windspeeds will always be recorded and can then be employed in Cat bond triggers. For the developing world, the installation and maintenance of resilient recording networks can kick-start risk transfer mechanisms even in the absence of insurance.

  17. Instrumentation

    International Nuclear Information System (INIS)

    Prieur, G.; Nadi, M.; Hedjiedj, A.; Weber, S.

    1995-01-01

    This second chapter on instrumentation gives little general consideration on history and classification of instrumentation, and two specific states of the art. The first one concerns NMR (block diagram of instrumentation chain with details on the magnets, gradients, probes, reception unit). The first one concerns precision instrumentation (optical fiber gyro-meter and scanning electron microscope), and its data processing tools (programmability, VXI standard and its history). The chapter ends with future trends on smart sensors and Field Emission Displays. (D.L.). Refs., figs

  18. Instrumentation

    International Nuclear Information System (INIS)

    Decreton, M.

    2000-01-01

    SCK-CEN's research and development programme on instrumentation aims at evaluating the potentials of new instrumentation technologies under the severe constraints of a nuclear application. It focuses on the tolerance of sensors to high radiation doses, including optical fibre sensors, and on the related intelligent data processing needed to cope with the nuclear constraints. Main achievements in these domains in 1999 are summarised

  19. Integrated Solution Support System for Water Management

    NARCIS (Netherlands)

    Kassahun, A.; Blind, M.; Krause, A.U.M.; Roosenschoon, O.R.

    2008-01-01

    Solving water management problems involves technical, social, economic, political and legal challenges and thus requires an integrated approach involving people from different backgrounds and roles. The integrated approach has been given a prominent role within the European Union¿s Water Framework

  20. Supporting Theory Building in Integrated Services Research

    Science.gov (United States)

    Robinson, Mark; Atkinson, Mary; Downing, Dick

    2008-01-01

    This literature review was commissioned by the National Foundation for Educational Research (NFER) to draw together current and recent studies of integrated working, in order to build an overview of the theories and models of such working. The review is important for current work on evaluating the early impact of integrated children's services and…

  1. Application specific integrated circuits and hybrid micro circuits for nuclear instrumentation

    International Nuclear Information System (INIS)

    Chandratre, V.B.; Sukhwani, Menka; Mukhopadhyay, P.K.; Shastrakar, R.S.; Sudheer, M.; Shedam, V.; Keni, Anubha

    2009-01-01

    Rapid development in semiconductor technology, sensors, detectors and requirements of high energy physics experiments as well as advances in commercially available nuclear instruments have lead to challenges for instrumentation. These challenges are met with development of Application Specific Integrated Circuits and Hybrid Micro Circuits. This paper discusses various activities in ASIC and HMC development in Bhabha Atomic Research Centre. (author)

  2. Instrumentation. Nondestructive Examination for Verification of Canister and Cladding Integrity - FY2013 Status Update

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, Ryan M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Jones, Anthony M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Pardini, Allan F. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Denslow, Kayte M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Crawford, Susan L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Larche, Michael R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2013-09-30

    This report documents FY13 efforts for two instrumentation subtasks under storage and transportation. These instrumentation tasks relate to developing effective nondestructive evaluation (NDE) methods and techniques to (1) verify the integrity of metal canisters for the storage of used nuclear fuel (UNF) and to (2) characterize hydrogen effects in UNF cladding to facilitate safe storage and retrieval.

  3. Instrumentation

    International Nuclear Information System (INIS)

    Decreton, M.

    2002-01-01

    SCK-CEN's R and D programme on instrumentation involves the development of advanced instrumentation systems for nuclear applications as well as the assessment of the performance of these instruments in a radiation environment. Particular emphasis is on the use of optical fibres as umbilincal links of a remote handling unit for use during maintanance of a fusion reacor, studies on the radiation hardening of plasma diagnostic systems; investigations on new instrumentation for the future MYRRHA accelerator driven system; space applications related to radiation-hardened lenses; the development of new approaches for dose, temperature and strain measurements; the assessment of radiation-hardened sensors and motors for remote handling tasks and studies of dose measurement systems including the use of optical fibres. Progress and achievements in these areas for 2001 are described

  4. Instrumentation

    Energy Technology Data Exchange (ETDEWEB)

    Decreton, M

    2002-04-01

    SCK-CEN's R and D programme on instrumentation involves the development of advanced instrumentation systems for nuclear applications as well as the assessment of the performance of these instruments in a radiation environment. Particular emphasis is on the use of optical fibres as umbilincal links of a remote handling unit for use during maintanance of a fusion reacor, studies on the radiation hardening of plasma diagnostic systems; investigations on new instrumentation for the future MYRRHA accelerator driven system; space applications related to radiation-hardened lenses; the development of new approaches for dose, temperature and strain measurements; the assessment of radiation-hardened sensors and motors for remote handling tasks and studies of dose measurement systems including the use of optical fibres. Progress and achievements in these areas for 2001 are described.

  5. James Webb Space Telescope (JWST) Integrated Science Instruments Module (ISIM) Cryo-Vacuum (CV) Test Campaign Summary

    Science.gov (United States)

    Yew, Calinda; Whitehouse, Paul; Lui, Yan; Banks, Kimberly

    2016-01-01

    JWST Integrated Science Instruments Module (ISIM) has completed its system-level testing program at the NASA Goddard Space Flight Center (GSFC). In March 2016, ISIM was successfully delivered for integration with the Optical Telescope Element (OTE) after the successful verification of the system through a series of three cryo-vacuum (CV) tests. The first test served as a risk reduction test; the second test provided the initial verification of the fully-integrated flight instruments; and the third test verified the system in its final flight configuration. The complexity of the mission has generated challenging requirements that demand highly reliable system performance and capabilities from the Space Environment Simulator (SES) vacuum chamber. As JWST progressed through its CV testing campaign, deficiencies in the test configuration and support equipment were uncovered from one test to the next. Subsequent upgrades and modifications were implemented to improve the facility support capabilities required to achieve test requirements. This paper: (1) provides an overview of the integrated mechanical and thermal facility systems required to achieve the objectives of JWST ISIM testing, (2) compares the overall facility performance and instrumentation results from the three ISIM CV tests, and (3) summarizes lessons learned from the ISIM testing campaign.

  6. Instrumentation

    Energy Technology Data Exchange (ETDEWEB)

    Decreton, M

    2000-07-01

    SCK-CEN's research and development programme on instrumentation aims at evaluating the potentials of new instrumentation technologies under the severe constraints of a nuclear application. It focuses on the tolerance of sensors to high radiation doses, including optical fibre sensors, and on the related intelligent data processing needed to cope with the nuclear constraints. Main achievements in these domains in 1999 are summarised.

  7. Thalamocortical integration of instrumental learning and performance and their disintegration in addiction.

    Science.gov (United States)

    Balleine, Bernard W; Morris, Richard W; Leung, Beatrice K

    2015-12-02

    A recent focus of addiction research has been on the effect of drug exposure on the neural processes that mediate the acquisition and performance of goal-directed instrumental actions. Deficits in goal-directed control and a consequent dysregulation of habit learning processes have been described as resulting in compulsive drug seeking. Similarly, considerable research has focussed on the motivational and emotional changes that drugs produce and that result in changes in the incentive processes that modulate goal-directed performance. Although these areas have developed independently, we argue that the effects they described are likely not independent. Here we hypothesize that these changes result from a core deficit in the way the learning and performance factors that support goal-directed action are integrated at a neural level to maintain behavioural control. A dorsal basal ganglia stream mediating goal-directed learning and a ventral stream mediating various performance factors find several points of integration in the cortical basal ganglia system, most notably in the thalamocortical network linking basal ganglia output to a variety of cortical control centres. Recent research in humans and other animals is reviewed suggesting that learning and performance factors are integrated in a network centred on the mediodorsal thalamus and that disintegration in this network may provide the basis for a 'switch' from recreational to dysregulated drug seeking resulting in the well documented changes associated with addiction. Copyright © 2014 Elsevier B.V. All rights reserved.

  8. The Complexity integrated-Instruments components media of IPA at Elementary School

    Directory of Open Access Journals (Sweden)

    Angreni Siska

    2018-01-01

    Full Text Available This research aims at describing the complexity of Integrated Instrument Components media (CII in learning of science at Elementary schools in District Siulak Mukai and at Elementary schools in District Siulak. The research applied a descriptive method which included survey forms. Instruments used were observation sheets. The result of the research showed Integrated Instrument Components media (CII natural science that complexity at primary school district Siulak was more complex compared with that at primary school district Siulak Mukai. is better than from primary school district Mukai

  9. Precision Instrumentation Amplifiers and Read-Out Integrated Circuits

    CERN Document Server

    Wu, Rong; Makinwa, Kofi A A

    2013-01-01

    This book presents innovative solutions in the design of precision instrumentation amplifier and read-out ICs, which can be used to boost millivolt-level signals transmitted by modern sensors, to levels compatible with the input ranges of typical Analog-to-Digital Converters (ADCs).  The discussion includes the theory, design and realization of interface electronics for bridge transducers and thermocouples. It describes the use of power efficient techniques to mitigate low frequency errors, resulting in interface electronics with high accuracy, low noise and low drift. Since this book is mainly about techniques for eliminating low frequency errors, it describes the nature of these errors and the associated dynamic offset cancellation techniques used to mitigate them.  Surveys comprehensively offset cancellation and accuracy improvement techniques applied in precision amplifier designs; Presents techniques in precision circuit design to mitigate low frequency errors in millivolt-level signals transmitted by ...

  10. Mixed signal custom integrated circuit development for physics instrumentation

    International Nuclear Information System (INIS)

    Britton, C.L. Jr.; Bryan, W.L.; Emery, M.S.

    1998-01-01

    The Monolithic Systems Development Group at the Oak Ridge National Laboratory has been greatly involved in custom mixed-mode integrated circuit development for the PHENIX detector at the Relativistic Heavy Ion collider (RHIC) at Brookhaven National Laboratory and position-sensitive germanium spectrometer front-ends for the Naval Research Laboratory (NRL). This paper will outline the work done for both PHENIX and the Naval Research Laboratory in the area of full-custom, mixed-signal CMOS integrated electronics. This paper presents the architectures chosen for the various PHENIX detectors which include position-sensitive silicon, capacitive pixel, and phototube detectors, and performance results for the subsystems as well as a system description of the NRL germanium strip system and its performance. The performance of the custom preamplifiers, discriminators, analog memories, analog-digital converters, and control circuitry for all systems will be presented

  11. Mixed signal custom integrated circuit development for physics instrumentation

    Energy Technology Data Exchange (ETDEWEB)

    Britton, C.L. Jr.; Bryan, W.L.; Emery, M.S. [and others

    1998-10-01

    The Monolithic Systems Development Group at the Oak Ridge National Laboratory has been greatly involved in custom mixed-mode integrated circuit development for the PHENIX detector at the Relativistic Heavy Ion collider (RHIC) at Brookhaven National Laboratory and position-sensitive germanium spectrometer front-ends for the Naval Research Laboratory (NRL). This paper will outline the work done for both PHENIX and the Naval Research Laboratory in the area of full-custom, mixed-signal CMOS integrated electronics. This paper presents the architectures chosen for the various PHENIX detectors which include position-sensitive silicon, capacitive pixel, and phototube detectors, and performance results for the subsystems as well as a system description of the NRL germanium strip system and its performance. The performance of the custom preamplifiers, discriminators, analog memories, analog-digital converters, and control circuitry for all systems will be presented.

  12. Instrumentation

    International Nuclear Information System (INIS)

    Umminger, K.

    2008-01-01

    A proper measurement of the relevant single and two-phase flow parameters is the basis for the understanding of many complex thermal-hydraulic processes. Reliable instrumentation is therefore necessary for the interaction between analysis and experiment especially in the field of nuclear safety research where postulated accident scenarios have to be simulated in experimental facilities and predicted by complex computer code systems. The so-called conventional instrumentation for the measurement of e. g. pressures, temperatures, pressure differences and single phase flow velocities is still a solid basis for the investigation and interpretation of many phenomena and especially for the understanding of the overall system behavior. Measurement data from such instrumentation still serves in many cases as a database for thermal-hydraulic system codes. However some special instrumentation such as online concentration measurement for boric acid in the water phase or for non-condensibles in steam atmosphere as well as flow visualization techniques were further developed and successfully applied during the recent years. Concerning the modeling needs for advanced thermal-hydraulic codes, significant advances have been accomplished in the last few years in the local instrumentation technology for two-phase flow by the application of new sensor techniques, optical or beam methods and electronic technology. This paper will give insight into the current state of instrumentation technology for safety-related thermohydraulic experiments. Advantages and limitations of some measurement processes and systems will be indicated as well as trends and possibilities for further development. Aspects of instrumentation in operating reactors will also be mentioned.

  13. SEAMIST trademark in-situ instrumentation and vapor sampling system applications in the Sandia Mixed Waste Landfill Integrated Demonstration Program

    International Nuclear Information System (INIS)

    Lowry, W.E.; Dunn, S.D.; Cremer, S.C.; Williams, C.

    1994-01-01

    The SEAMIST trademark inverting membrane deployment system has been used successfully at the Mixed Waste Landfill Integrated Demonstration (MWLID) for multipoint vapor sampling/pressure measurement/permeability measurement/sensor integration demonstrations and borehole lining. Several instruments were deployed inside the SEAMIST trademark lined boreholes to detect metals, radionuclides, moisture, and geologic variations. The liner protected the instruments from contamination, maintained support of the uncased borehole wall, and sealed the total borehole from air circulation. The current activities have included the installation of three multipoint vapor sampling systems and sensor integration systems in 100-foot-deep vertical boreholes. A long term pressure monitoring program has recorded barometric pressure effects at depth with relatively high spatial resolution. The SEAMIST trademark system has been integrated with a variety of hydrologic and chemical sensors for in-situ measurements, demonstrating its versatility as an instrument deployment system which allows easy emplacement and removal. Standard SEAMIST trademark vapor sampling systems were also integrated with state-of-the-art VOC analysis technologies (automated GC, UV laser fluorometer). The results and status of these demonstration tests are presented

  14. Perceived instrumental support and children's health across the early life course.

    Science.gov (United States)

    Turney, Kristin

    2013-10-01

    A large, venerable literature demonstrates the importance of social relationships and social support for health, though much less research examines whether the benefits of social support to mothers extend to children. This paper examines the relationship between mothers' perceptions of instrumental support and children's health using longitudinal data from the U.S. Fragile Families and Child Wellbeing Study (N = 4342), a cohort of American children born in urban areas to mostly unmarried parents. Results suggest mothers' perceptions of instrumental support is positively associated with children's overall health, and this finding persists despite controlling for a host of individual-level characteristics of mothers and children (including a lagged indicator of children's health) and in fixed-effect models. Mothers' economic security and mothers' wellbeing attenuate some, but not all, of the association between perceived instrumental support and children's overall health. In addition, the link between perceived instrumental support and three specific indicators of health - asthma, overweight/obese, and number of emergency room visits - falls to statistical insignificance after accounting for individual-level characteristics, suggesting these associations result from social selection processes. Taken together, these findings suggest the beneficial health consequences of social support may extend to children across the early life course and demonstrate the need to better understand mothers' reports of children's overall health. Copyright © 2012 Elsevier Ltd. All rights reserved.

  15. Integrated synchronous receiver channel for optical instrumentation applications

    Science.gov (United States)

    Benten, Harold G. P. H.; Ruotsalainen, Tarmo; Maekynen, Anssi J.; Rahkonen, Timo E.; Kopola, Harri K.

    1997-09-01

    A two-channel synchronous receiver circuit for optical instrumentation applications has been designed and implemented. Each receiver channel comprises a.o. transimpedance preamplifier, voltage amplifiers, programmable feedback networks, and a synchronous detector. The function of the channel is to extract the slowly varying information carrying signal from a modulated carrier which is accompanied by relatively high levels of noise. As a whole, the channel can be characterized as a narrow band filter around the frequency of interest. Medical applications include arterial oxygen saturation (SaO2) measurement and dental pulp vitality measurement. In both cases, two optical signals with different frequencies are received by a single photodiode. The measured performance of the optical receiver shows its suitability for the above mentioned applications. Therefore the circuit will be used in a small sized, battery-operated sensor prototype to test the sensing method in a clinical environment. Other applications include the signal processing of optical position-sensitive detectors. A summary of measured receiver channel performance: input reduced noise current spectral density between 0.20 and 0.30 pA/(root)Hz at all relevant frequencies, total programmable channel transimpedance between 7 M(Omega) and 500 M(Omega) , lower -3 dB frequency of at least 50 Hz, upper -3 dB frequency of 40 kHz, maximum voltage swing at the demodulator output of 2.4 V.

  16. Integration of cryopump instrumentation for SST-1 NBI

    International Nuclear Information System (INIS)

    Bansal, Laxmi Kant; Patel, Paresh J.; Prahlad, V.

    2015-01-01

    A positive ion neutral injector (PINI) capable in delivering 5MW (55kV, 90A) ion beam power is being operated for SST-1 neutral beam injection (NBI). The production and neutralization of the ion beams in the injector requires a gas throughput of 20 torr I/s in the plasma box and 50-100 torr I/s in the neutralizer section. It is necessary to maintain operating pressure of vessel at 10 -5 torr to reduce the re-ionization loss of beam within tolerable limits. Conventional Turbo molecular pumps cannot maintain this vacuum level at required gas feed rate so two cryo condensation pumps are being operated to achieve require vacuum in vessel. In order to monitor and optimize the performance of cryopumps, it is necessary to measure the temperature at various locations in LN 2 and LHe path. It is also required to monitor the level of LHe and LN 2 in cryopumps. Several temperature and level sensors are mounted at various places in cryopumps and integrated with PLC and SCADA based control system. This paper presents the details of sensor mounting, signals conditioning, scheme of their integration with PLC and SCADA and results in detail. (author)

  17. Integrated aerospace technologies in precision agriculture support

    International Nuclear Information System (INIS)

    Borfecchia, F.; De Cecco, L.; Martini, S.; Giordano, L.; Trotta, C.; Masci, D.; Di Gioia, V.; Pignatelli, V.; Micheli, C.; Moreno, A.; Taraglio, S.; Nanni, V.; Moriconi, Cl.; Mancini, S.; Pizzuti, A.; Picciucco, P.

    2015-01-01

    In a scenery where agriculture plays a more and more 'decisive and strategic role, the spread, in that sector, of aerospace and advanced robotic technology, more and more' accessible, meets the needs of basing decisions on integrated information, not only for increase production, but also to ensure food quality 'to the world population, minimizing the environmental impacts and climatic problems, and enhancing biodiversity'. [it

  18. Instruments

    International Nuclear Information System (INIS)

    Buehrer, W.

    1996-01-01

    The present paper mediates a basic knowledge of the most commonly used experimental techniques. We discuss the principles and concepts necessary to understand what one is doing if one performs an experiment on a certain instrument. (author) 29 figs., 1 tab., refs

  19. Governance as an instrument of successful organizational integration.

    Science.gov (United States)

    Lozon, Jeffrey C; Vernon, Sarah E

    2002-01-01

    In July 1997 the Health Services Restructuring Commission (HSRC) issued a formal direction to the Wellesley Central Hospital to relinquish the operation and management of its programs and services to St. Michael's Hospital. This event propelled staff and volunteers into four years of unrelenting efforts to bring together the mission, vision, values, human resources, clinical programs and broad communities of these two very unique and long-standing organizations. Looking back, the result was arguably one of the most successful hospital mergers in the province at that time. A number of factors were responsible for this outcome. The tremendous value of a strong and integrated governance team clearly stands out as one of the most pivotal success factors. This article examines the principles and structures that guided the governance team and St. Michael's Hospital to a stronger and more vibrant future.

  20. Instrumentation

    International Nuclear Information System (INIS)

    Muehllehner, G.; Colsher, J.G.

    1982-01-01

    This chapter reviews the parameters which are important to positron-imaging instruments. It summarizes the options which various groups have explored in designing tomographs and the methods which have been developed to overcome some of the limitations inherent in the technique as well as in present instruments. The chapter is not presented as a defense of positron imaging versus single-photon or other imaging modality, neither does it contain a description of various existing instruments, but rather stresses their common properties and problems. Design parameters which are considered are resolution, sampling requirements, sensitivity, methods of eliminating scattered radiation, random coincidences and attenuation. The implementation of these parameters is considered, with special reference to sampling, choice of detector material, detector ring diameter and shielding and variations in point spread function. Quantitation problems discussed are normalization, and attenuation and random corrections. Present developments mentioned are noise reduction through time-of-flight-assisted tomography and signal to noise improvements through high intrinsic resolution. Extensive bibliography. (U.K.)

  1. Measuring quality in community based housing support - the QPC-H instrument.

    Science.gov (United States)

    Lundqvist, Lars-Olov; Rask, Mikael; Brunt, David; Ivarsson, Ann-Britt; Schröder, Agneta

    2016-04-18

    Purpose - The purpose of this paper is to test the psychometric properties and dimensionality of the instrument Quality in Psychiatric Care-Housing (QPC-H) and briefly describe the residents' perception of quality of housing support. Design/methodology/approach - A sample of 174 residents from 22 housing support services in nine Swedish municipalities participated in the study. Confirmatory factor analysis (CFA) revealed that the QPC-H consisted of six dimensions and had a factor structure largely corresponding to that found among other instruments in the Quality in Psychiatric Care (QPC) family of instruments. Findings - CFA revealed that the QPC-H consisted of six dimensions and had a factor structure largely corresponding to that found among other instruments in the QPC family of instruments. The internal consistency of the factors was acceptable except in the case of secure and secluded environment, probably due to few numbers of items. With this exception, the QPC-H shows adequate psychometric properties. Social implications - The residents' ratings of quality of housing service were generally high; the highest rating was for secluded environment and the lowest for participation. This dimension would thus seem to indicate an important area for improvement. Originality/value - The QPC-H includes important aspects of residents' assessment of quality of housing service and offers a simple and inexpensive way to evaluate housing support services from the residents' perspective.

  2. System Definition of the James Webb Space Telescope (JWST) Integrated Science Instrument Module (ISIM)

    Science.gov (United States)

    Lundquist, Ray; Aymergen, Cagatay; VanCampen, Julie; Abell, James; Smith, Miles; Driggers, Phillip

    2008-01-01

    The Integrated Science Instrument Module (ISIM) for the James Webb Space Telescope (JWST) provides the critical functions and the environment for the four science instruments on JWST. This complex system development across many international organizations presents unique challenges and unique solutions. Here we describe how the requirement flow has been coordinated through the documentation system, how the tools and processes are used to minimize impact to the development of the affected interfaces, how the system design has matured, how the design review process operates, and how the system implementation is managed through reporting to ensure a truly world class scientific instrument compliment is created as the final product.

  3. The EGSE science software of the IBIS instrument on-board INTEGRAL satellite

    International Nuclear Information System (INIS)

    La Rosa, Giovanni; Fazio, Giacomo; Segreto, Alberto; Gianotti, Fulvio; Stephen, John; Trifoglio, Massimo

    2000-01-01

    IBIS (Imager on Board INTEGRAL Satellite) is one of the key instrument on-board the INTEGRAL satellite, the follow up mission of the high energy missions CGRO and Granat. The EGSE of IBIS is composed by a Satellite Interface Simulator, a Control Station and a Science Station. Here are described the solutions adopted for the architectural design of the software running on the Science Station. Some preliminary results are used to show the science functionality, that allowed to understand the instrument behavior, all along the test and calibration campaigns of the Engineering Model of IBIS

  4. Cryo-Vacuum Testing of the Integrated Science Instrument Module for the James Webb Space Telescope

    Science.gov (United States)

    Kimble, Randy A.; Davila, P. S.; Drury, M. P.; Glazer, S. D.; Krom, J. R.; Lundquist, R. A.; Mann, S. D.; McGuffey, D. B.; Perry, R. L.; Ramey, D. D.

    2011-01-01

    With delivery of the science instruments for the James Webb Space Telescope (JWST) to Goddard Space Flight Center (GSFC) expected in 2012, current plans call for the first cryo-vacuum test of the Integrated Science Instrument Module (ISIM) to be carried out at GSFC in early 2013. Plans are well underway for conducting this ambitious test, which will perform critical verifications of a number of optical, thermal, and operational requirements of the IS 1M hardware, at its deep cryogenic operating temperature. We describe here the facilities, goals, methods, and timeline for this important Integration & Test milestone in the JWST program.

  5. Receiving Instrumental Support in Late Parent-Child Relationships and Parental Depression

    NARCIS (Netherlands)

    Djundeva, Maja; Mills, Melinda; Wittek, Rafael; Steverink, Nardi

    This study investigates the role of gender, functional limitations, and social interaction in the association between instrumental support from adult children and parental depression. We apply self-determination theory to hypothesize about the role of physical needs and social resources on parental

  6. Development of an instrument designed to measure employees' perceptions of workplace breastfeeding support.

    Science.gov (United States)

    Greene, Sally W; Olson, Beth H

    2008-09-01

    Breastfeeding rates remain low in the United States, especially among working women. Unfortunately, no quantitative instrument exists to facilitate the examination of why women who return to work discontinue breastfeeding sooner than the general population. The objective of this study was to develop an instrument to measure female employees' perceptions of breastfeeding support in the workplace, which would be suitable for piloting with the target population. Examination of the literature, reviews with experts, and one-on-one interviews with women who had experience combining breastfeeding and work were used to create the instrument subscales and items. Examination of the literature was used to develop four subscales: company policies/work culture, manager support, co-worker support, and workflow. Expert review resulted in the addition of a fifth subscale, the physical environment of the breastfeeding space. One-on-one interviews were used to ensure that the item wording was appropriate for the target population. Eighteen items were added, and 15 were reworded based on comments from the expert review and from the interviews. The resulting survey contained 54 items that required either categorical yes/no or Likert scale responses. Results from this process indicate the survey subscales and items adequately reflect women's perceptions of breastfeeding support in the workplace and the instrument is appropriate for piloting with new mother employees.

  7. Outcomes of moral case deliberation - the development of an evaluation instrument for clinical ethics support (the Euro-MCD)

    NARCIS (Netherlands)

    Svantesson, M.; Karlsson, J.; Boitte, P.; Schildman, J.; Dauwerse, L.; Widdershoven, G.; Pedersen, R.; Huisman, M.; Molewijk, A.C.

    2014-01-01

    Background: Clinical ethics support, in particular Moral Case Deliberation, aims to support health care providers to manage ethically difficult situations. However, there is a lack of evaluation instruments regarding outcomes of clinical ethics support in general and regarding Moral Case

  8. Technology Integration Support Levels for In-Service Teachers

    Science.gov (United States)

    Williams, Mable Evans

    2017-01-01

    In-service teachers across the globe are expected to integrate technology in their respective instructional content area. The purpose of this qualitative study was to explore the perceptions of in-service teachers concerning building-level support for technology integration. Participants in the study were asked to participate in semi-structured…

  9. Highly integrated Pluto payload system (HIPPS): a sciencecraft instrument for the Pluto mission

    Science.gov (United States)

    Stern, S. Alan; Slater, David C.; Gibson, William; Reitsema, Harold J.; Delamere, W. Alan; Jennings, Donald E.; Reuter, D. C.; Clarke, John T.; Porco, Carolyn C.; Shoemaker, Eugene M.; Spencer, John R.

    1995-09-01

    We describe the design concept for the highly integrated Pluto payload system (HIPPS): a highly integrated, low-cost, light-weight, low-power instrument payload designed to fly aboard the proposed NASA Pluto flyby spacecraft destined for the Pluto/Charon system. The HIPPS payload is designed to accomplish all of the Pluto flyby prime (IA) science objectives, except radio science, set forth by NASA's Outer Planets Science Working Group (OPSWG) and the Pluto Express Science Definition Team (SDT). HIPPS contains a complement of three instrument components within one common infrastructure; these are: (1) a visible/near UV CCD imaging camera; (2) an infrared spectrograph; and (3) an ultraviolet spectrograph. A detailed description of each instrument is presented along with how they will meet the IA science requirements.

  10. Successful outsourcing: improving quality of life through integrated support services.

    Science.gov (United States)

    Bates, Jason; Sharratt, Martin; King, John

    2014-01-01

    This article examines the way that non-clinical support services are provided in healthcare settings through outsourcing partnerships. The integrated support services model and benefits to patient experience and safety as well as organizational efficiency and effectiveness are explored through an examination of services at a busy urban community hospital.

  11. Space-compatible strain gauges as an integration aid for the James Webb Space Telescope Mid-Infrared Instrument

    DEFF Research Database (Denmark)

    Samara-Ratna, Piyal; Sykes, Jon; Bicknell, Chris

    2015-01-01

    Space instruments are designed to be highly optimised, mass efficient hardware required to operate in extreme environments. Building and testing is extremely costly, and damage that appears to have no impact on performance at normal ambient conditions can have disastrous implications when...... to protect the structure from damage. Compatible with space flight requirements, the gauges have been used in both ambient and cryogenic environments and were successfully used to support various tasks including integration to the spacecraft. The article also discusses limitations to using the strain gauge...

  12. The SLICE, CHESS, and SISTINE Ultraviolet Spectrographs: Rocket-Borne Instrumentation Supporting Future Astrophysics Missions

    Science.gov (United States)

    France, Kevin; Hoadley, Keri; Fleming, Brian T.; Kane, Robert; Nell, Nicholas; Beasley, Matthew; Green, James C.

    2016-03-01

    NASA’s suborbital program provides an opportunity to conduct unique science experiments above Earth’s atmosphere and is a pipeline for the technology and personnel essential to future space astrophysics, heliophysics, and atmospheric science missions. In this paper, we describe three astronomy payloads developed (or in development) by the Ultraviolet Rocket Group at the University of Colorado. These far-ultraviolet (UV) (100-160nm) spectrographic instruments are used to study a range of scientific topics, from gas in the interstellar medium (accessing diagnostics of material spanning five orders of magnitude in temperature in a single observation) to the energetic radiation environment of nearby exoplanetary systems. The three instruments, Suborbital Local Interstellar Cloud Experiment (SLICE), Colorado High-resolution Echelle Stellar Spectrograph (CHESS), and Suborbital Imaging Spectrograph for Transition region Irradiance from Nearby Exoplanet host stars (SISTINE) form a progression of instrument designs and component-level technology maturation. SLICE is a pathfinder instrument for the development of new data handling, storage, and telemetry techniques. CHESS and SISTINE are testbeds for technology and instrument design enabling high-resolution (R>105) point source spectroscopy and high throughput imaging spectroscopy, respectively, in support of future Explorer, Probe, and Flagship-class missions. The CHESS and SISTINE payloads support the development and flight testing of large-format photon-counting detectors and advanced optical coatings: NASA’s top two technology priorities for enabling a future flagship observatory (e.g. the LUVOIR Surveyor concept) that offers factors of ˜50-100 gain in UV spectroscopy capability over the Hubble Space Telescope. We present the design, component level laboratory characterization, and flight results for these instruments.

  13. Status Report on Efforts to Enhance Instrumentation to Support Advanced Test Reactor Irradiations

    Energy Technology Data Exchange (ETDEWEB)

    J. L. Rempe; D. L. Knudson; J. E. Daw

    2011-03-01

    The Department of Energy (DOE) designated the Advanced Test Reactor (ATR) as a National Scientific User Facility (NSUF) in April 2007 to support U.S. leadership in nuclear science and technology. By attracting new research users - universities, laboratories, and industry - the ATR NSUF facilitates basic and applied nuclear research and development, further advancing the nation's energy security needs. A key component of the ATR NSUF effort is to prove new in-pile instrumentation techniques that are capable of providing real-time measurements of key parameters during irradiation. To address this need, an assessment of instrumentation available and under-development at other test reactors was completed. Based on this review, recommendations were made with respect to what instrumentation is needed at the ATR; and a strategy was developed for obtaining these sensors. In 2009, a report was issued documenting this program’s strategy and initial progress toward accomplishing program objectives. In 2009, a report was issued documenting this instrumentation development strategy and initial progress toward accomplishing instrumentation development program objectives. This document reports progress toward implementing this strategy in 2010.

  14. Status Report on Efforts to Enhance Instrumentation to Support Advanced Test Reactor Irradiations

    International Nuclear Information System (INIS)

    Rempe, J.L.; Knudson, D.L.; Daw, J.E.

    2011-01-01

    The Department of Energy (DOE) designated the Advanced Test Reactor (ATR) as a National Scientific User Facility (NSUF) in April 2007 to support U.S. leadership in nuclear science and technology. By attracting new research users - universities, laboratories, and industry - the ATR NSUF facilitates basic and applied nuclear research and development, further advancing the nation's energy security needs. A key component of the ATR NSUF effort is to prove new in-pile instrumentation techniques that are capable of providing real-time measurements of key parameters during irradiation. To address this need, an assessment of instrumentation available and under-development at other test reactors was completed. Based on this review, recommendations were made with respect to what instrumentation is needed at the ATR; and a strategy was developed for obtaining these sensors. In 2009, a report was issued documenting this program's strategy and initial progress toward accomplishing program objectives. In 2009, a report was issued documenting this instrumentation development strategy and initial progress toward accomplishing instrumentation development program objectives. This document reports progress toward implementing this strategy in 2010.

  15. Cryo Testing of tbe James Webb Space Telescope's Integrated Science Instrument Module

    Science.gov (United States)

    VanCampen, Julie

    2004-01-01

    The Integrated Science Instrument Module (ISIM) of the James Webb Space Telescope will be integrated and tested at the Environmental Test Facilities at Goddard Space Flight Center (GSFC). The cryogenic thermal vacuum testing of the ISIM will be the most difficult and problematic portion of the GSFC Integration and Test flow. The test is to validate the coupled interface of the science instruments and the ISIM structure and to sufficiently stress that interface while validating image quality of the science instruments. The instruments and the structure are not made from the same materials and have different CTE. Test objectives and verification rationale are currently being evaluated in Phase B of the project plan. The test program will encounter engineering challenges and limitations, which are derived by cost and technology many of which can be mitigated by facility upgrades, creative GSE, and thorough forethought. The cryogenic testing of the ISIM will involve a number of risks such as the implementation of unique metrology techniques, mechanical, electrical and optical simulators housed within the cryogenic vacuum environment. These potential risks are investigated and possible solutions are proposed.

  16. Instrumental and integrative orientations: Predictors of willingness to communicate in the Iranian EFL context

    Directory of Open Access Journals (Sweden)

    Mahsa Ghanbarpour

    2014-07-01

    Full Text Available Given that promoting learners’ communicative competence in a second language (L2 is one of the primary foci of communicative language teaching approaches, the late 1980s saw an expansion in research into willingness to communicate (WTC, which is deemed to affect individuals’ predisposition towards the initiation of L2 communication. The principal aims of this study are(a to reveal whether instrumental motivation and integrative orientation are correlated with WTC, (b to delve into the contribution of instrumental and integrative orientations to the explanation of WTC, (c to examine which of the two motivational propensities is a better predictor of WTC, and (d to find whether 3 groups of learners with low, medium, and high levels of instrumental and integrative orientations differ in terms of their level of reported WTC. To this end, 188 Iranian EFL learners, who were randomly selected, filled out a WTC questionnaire and a language learning motivation questionnaire. Results of path analysis and standard multiple regression revealed that although both motivational orientations significantly contributed to the explanation of WTC, instrumental motivation, which uniquely explained 3.7% of the variance in total WTC, was a better predictor of WTC. Informed by the results of one-way between-groups ANOVA, a significant difference was encountered among the reported L2 WTC levels of the 3 groups of learners with various levels of both instrumental orientation and integrative motivation. The findings could cast light onto the nexus between motivation and WTC in the Iranian EFL context and the intricacies and dynamics of the WTC process.

  17. Analysis of Competitiveness and Support Instruments for Heat and Electricity Production from Wood Biomass in Latvia

    Science.gov (United States)

    Klavs, G.; Kudrenickis, I.; Kundzina, A.

    2012-01-01

    Utilisation of renewable energy sources is one of the key factors in a search for efficient ways of reducing the emissions of greenhouse gases and improving the energy supply security. So far, the district heating supply in Latvia has been based on natural gas, with the wood fuel playing a minor role; the same is true for decentralised combined heat-power (CHP) production. The paper describes a method for evaluation of the economic feasibility of heat and electricity production from wood biomass under the competition between different fuel types and taking into account the electricity market. For the simulation, a cost estimation model is applied. The results demonstrate that wood biomass can successfully be utilised for competitive heat production by boiler houses, while for electricity production by CHP utilities it cannot compete on the market (even despite the low prices on wood biomass fuel) unless particular financial support instruments are applied. The authors evaluate the necessary support level and the impact of two main support instruments - the investment subsidies and the feed-in tariff - on the economic viability of wood-fuelled CHP plants, and show that the feed-in tariff could be considered as an instrument strongly affecting the competitiveness of such type CHP. Regarding the feed-in tariff determination, a compromise should be found between the economy-dictated requirement to develop CHP projects concerning capacities above 5 MWel - on the one hand, and the relatively small heat loads in many Latvian towns - on the other.

  18. Assessing Management Support for Worksite Health Promotion: Psychometric Analysis of the Leading by Example (LBE) Instrument

    Science.gov (United States)

    Della, Lindsay J.; DeJoy, David M.; Goetzel, Ron Z.; Ozminkowski, Ronald J.; Wilson, Mark G.

    2009-01-01

    Objective This paper describes the development of the Leading by Example (LBE) instrument. Methods Exploratory factor analysis was used to obtain an initial factor structure. Factor validity was evaluated using confirmatory factor analysis methods. Cronbach’s alpha and item-total correlations provided information on the reliability of the factor subscales. Results Four subscales were identified: business alignment with health promotion objectives; awareness of the health-productivity link; worksite support for health promotion; leadership support for health promotion. Factor by group comparisons revealed that the initial factor structure is effective in detecting differences in organizational support for health promotion across different employee groups Conclusions Management support for health promotion can be assessed using the LBE, a brief, self-report questionnaire. Researchers can use the LBE to diagnose, track, and evaluate worksite health promotion programs. PMID:18517097

  19. INSTRUMENTS OF SUPPORT FOR RESEARCH AND DEVELOPMENT FUNDED BY LEADING DOMESTIC AND INTERNATIONAL SCIENCE FOUNDATIONS

    Directory of Open Access Journals (Sweden)

    Irina E. Ilina

    2017-06-01

    Full Text Available Introduction: one of the key aspects of the knowledge economy development is the growing significance of the results of research and development. The education and basic research play a key role in this process. Funding for education and fundamental science is carried out mainly at the expense of the state resources, including a system of foundations for scientific, engineering and innovation activities in Russia. The purpose of this article is to present recommendations for improving the tools of domestic foundations in funding fundamental research and development, including education and training. The propositions are made with a comparative analysis of the domestic and foreign science foun dations’ activities. Materials and Methods: the authors used analysis, comparison, induction, deduction, graphical analysis, generalisation and other scientific methods during the study. Results: the lack of comparability between domestic and foreign scientific funds in the volume of funding allocated for basic research and development is revealed. This situation affects the scientific research. The foreign foundations have a wide range of instruments to support research projects at all stages of the life cycle of grants for education and training prior to release of an innovative product to market (the use of “innovation elevator” system. The Russian national scientific foundations have no such possibilities. The authors guess that the Russian organisations ignore some of the instruments for supporting research and development. Use of these tools could enhance the effectiveness of research projects. According to the study of domestic and foreign experience in supporting research and development, the authors proposed a matrix composed of instruments for support in the fields of basic scientific researches and education with such phases of the project life cycle as “research” and “development”. Discussion and Conclusions: the foreign science

  20. Integration of Photovoltaics in Buildings—Support Policies Addressing Technical and Formal Aspects

    Directory of Open Access Journals (Sweden)

    Thorsten Schuetze

    2013-06-01

    Full Text Available The integration of photovoltaic (PV generators in the envelope of a building by means of building-integrated photovoltaics (BIPV offers an immense potential, both in market development and the production of renewable electric energy that is close to the point of electricity consumption. In Germany, for example, by integrating photovoltaics in buildings up to 50% of the electricity demand can be covered. The political support of BIPV would contribute to the development and installation of BIPV components and therefore also promote the development of new business areas for industries dealing with components used in building envelopes and photovoltaic generators. BIPV can be separated into three different integration types: “technical”, “formal” and “technical & formal”. Political instruments for the support of PV-installations, particularly BIPV are discussed in this paper using Germany and France as examples. Due to successful financial support policies, PV became the most powerful electricity production technology in Germany. In France, the unique financial support of BIPV is resulting in an exemplary development and growth of certified BIPV components available on the market and, from a technical, aesthetic architectural and legal certainty point of view, facilitating the easy and widespread integration of photovoltaic generators in buildings.

  1. Instrumentation and electrical program at the Three Mile Island Unit 2, Technical Integration Office

    International Nuclear Information System (INIS)

    Hecker, L.A.

    1982-01-01

    The Three Mile Island Unit 2 accident of March 28, 1979 presents unique research opportunities that can provide valuable information on nuclear power plant safety philosophy and safety systems performance. The Technical Integration Office at Three Mile Island was established by the Department of Energy to manage a broad-based research and development program. One significant part of this effort is the Instrumentation and Electrical Program, which operates: (1) to identify instruments and electrical components that failed during or since the accident; (2) to test and analyze them in order to identify the causes of failure; and (3) to assess the survivability of those that did not fail. The basis for selection of equipment is discussed, and the testing methodology is described. Also, some results of Instrumentation and Electrical Program work to date are presented

  2. Instruments used in the assessment of expectation toward a spine surgery: an integrative review

    Directory of Open Access Journals (Sweden)

    Eliane Nepomuceno

    Full Text Available Abstract OBJECTIVE To identify and describe the instruments used to assess patients' expectations toward spine surgery. METHOD An integrative review was carried out in the databases PubMed, CINAHL, LILACS and PsycINFO. RESULTS A total of 4,402 publications were identified, of which 25 met the selection criteria. Of the studies selected, only three used tools that had confirmed validity and reliability to be applied; in five studies, clinical scores were used, and were modified for the assessment of patients' expectations, and in 17 studies the researchers developed scales without an adequate description of the method used for their development and validation. CONCLUSION The assessment of patients' expectations has been methodologically conducted in different ways. Until the completion of this integrative review, only two valid and reliable instruments had been used in three of the selected studies.

  3. Instrumental, Integrative, and Intrinsic Orientations Towards Language: Deconstructing the Dichotomy in a Puerto Rican Community

    Directory of Open Access Journals (Sweden)

    Elaine Shenk

    2011-06-01

    Full Text Available Abstract Using a critical discourse analytical approach, this paper applies self-determination theory to the analysis of orientations towards language acquisition in data collected through interviews with 26 participants from Puerto Rico. In light of significant Spanish-English contact on the island, the paper considers how the participants’ discourses construct overlapping instrumental, integrative, and intrinsic orientations towards the presence of English in their community and, more broadly, towards language acquisition. The data suggest that both instrumental and integrative orientations are present, and that specific factors in this community’s history and experience do not predispose the participants towards a clear distinction between these two but rather contribute to a melding of both with a third way, that of intrinsic motivation, which validates and promotes bi- or even multilingualism on a broader scale without being focused on any one particular language or group of speakers.

  4. An Exploration into Integrating Daylight and Artificial Light via an Observational Instrument

    DEFF Research Database (Denmark)

    Petersen, Kjell Yngve; Søndergaard, Karin

    2015-01-01

    An Exploration into Integrating Daylight and Artificial Light via an Observational Instrument Daylight is dynamic and dependent upon weather conditions; unfolding with both subtle and dramatic variations in qualities of light. Through a building’s apertures, daylight creates a connection between...... abstract and blurred phenomena, these diffused luminous reflections rouse us into interactions with the world. In this book we are interested in identifying the qualitative parameters involved in the integration of dynamic artificial lighting and daylight; the latter being already highly dynamic by nature...... that examine how the dynamic artificial lighting in the observational instrument unfolds during the changing of the daylight situations that are generated by the weather outside. This research employs the concept of coupling between interior and exterior, in order to identify a spectrum of design parameters...

  5. Solid Waste Management Consortium: An Instrument of Integration and Promotion of Sustainable Development

    Directory of Open Access Journals (Sweden)

    Allexandre Guimarães Trindade

    2016-12-01

    Full Text Available Solid waste is a historic vulnerability of Brazilian society, that even with the during of National Policy of Solid Waste, Law n. 12.305/2010, the country faces major challenges, for its management. In this sense, the present article aims to demonstrate, by the method of dialectical approach that the management intercropped is the most suitable instrument to promote integrated management desired by Law n. 12.305/2010. This is a tool creates an integrated governance in actions of urban development, toward improving the quality of life, employment and income generations, expense savings, social participation and environmental justice.

  6. Integration of analog and digital instrumentation and control systems in hybrid control rooms

    International Nuclear Information System (INIS)

    2010-01-01

    he IAEA's activities in the area of nuclear power plant operating performance and life cycle management are aimed at increasing Member State capabilities in utilizing good engineering and management practices as developed and transferred by the IAEA. In particular, the IAEA supports the improvement of nuclear power plant performance, plant life management, training, power uprating, operational license renewal, and the modernization of instrumentation and control (I and C) systems of plants. The issue of the integration of analog and digital I and C systems in hybrid control rooms was suggested by the IAEA Technical Working Group on Nuclear Power Plant Control and Instrumentation (TWG-NPPCI) at its meetings in 2003 and 2005. The subject was then approved by the IAEA and included in its work programmes for 2006-2009. The purpose of this report is to help nuclear utilities in planning control room and other human system interface (HSI) changes, making appropriate use of modern technologies. These technologies would aid in managing ageing and obsolescence, and facilitate improvements in plant performance and safety. This report covers a broad spectrum of potential changes to the control room ranging from the replacement of a few obsolete components with newer digital devices to a fully computerized control room. New digital technologies offer significant opportunities to improve access to and presentation of information to the user, e.g. operators, maintenance staff and management. However, this technology should be used prudently. In some cases, modernization is undertaken to resolve ageing and obsolescence or to meet regulatory requirements for license renewal. The integration of new technologies during main control room (MCR) modernizations should be performed cautiously and all affected aspects of plant maintenance, and operation should be carefully considered, paying particular attention to the human factors elements of these aspects. This report describes a

  7. Methodological procedures and analytical instruments to evaluate an indicators integrated archive for urban management

    International Nuclear Information System (INIS)

    Del Ciello, R.; Napoleoni, S.

    1998-01-01

    This guide provides the results of a research developed at ENEA (National Agency for new Technology, Energy and the Environment) Casaccia center (Rome, Italy) aimed to define methodological procedures and analytical instruments needed to carry out an indicators integrated archive for urban management. The guide also defines the scheme of a negotiation process aimed to reach and exchange data and information among governmental and local administrations, non-governmental organizations and scientific bodies [it

  8. Automatic modal identification of cable-supported bridges instrumented with a long-term monitoring system

    Science.gov (United States)

    Ni, Y. Q.; Fan, K. Q.; Zheng, G.; Chan, T. H. T.; Ko, J. M.

    2003-08-01

    An automatic modal identification program is developed for continuous extraction of modal parameters of three cable-supported bridges in Hong Kong which are instrumented with a long-term monitoring system. The program employs the Complex Modal Indication Function (CMIF) algorithm to identify modal properties from continuous ambient vibration measurements in an on-line manner. By using the LabVIEW graphical programming language, the software realizes the algorithm in Virtual Instrument (VI) style. The applicability and implementation issues of the developed software are demonstrated by using one-year measurement data acquired from 67 channels of accelerometers deployed on the cable-stayed Ting Kau Bridge. With the continuously identified results, normal variability of modal vectors caused by varying environmental and operational conditions is observed. Such observation is very helpful for selection of appropriate measured modal vectors for structural health monitoring applications.

  9. Minilaparoscopic hysterectomy made easy: first report on alternative instrumentation and new integrated energy platform.

    Science.gov (United States)

    Ng, Ying Woo; Lim, Li Min; Fong, Yoke Fai

    2014-05-01

    Minilaparoscopy is an attractive approach for hysterectomy due to advantages such as reduced morbidities and enhanced cosmesis. However, it has not been popularized due to the lack of suitable instruments and high technical demand. We aim to highlight the first case of minilaparoscopic hysterectomy reported in Asia and the use of a new integrated energy platform, Thunderbeat. We would like to propose an alternative method of instrumentation, so as to improve the feasibility and safety of minilaparoscopic hysterectomy. The first minilaparoscopic hysterectomy in Singapore was successfully completed using the alternative instrumentation and new energy platform. There was no conversion or complication during the surgery. The patient recovered uneventfully. To our knowledge, this is the first report on the use of such alternative instrumentation. This approach in instrumentation and the new energy platform will improve the feasibility and speed of the surgery and ensure safety in our patients. © 2014 The Authors. Journal of Obstetrics and Gynaecology Research © 2014 Japan Society of Obstetrics and Gynecology.

  10. Integrated logistic support studies using behavioral Monte Carlo simulation, supported by Generalized Stochastic Petri Nets

    International Nuclear Information System (INIS)

    Garnier, Robert; Chevalier, Marcel

    2000-01-01

    Studying large and complex industrial sites, requires more and more accuracy in modeling. In particular, when considering Spares, Maintenance and Repair / Replacement processes, determining optimal Integrated Logistic Support policies requires a high level modeling formalism, in order to make the model as close as possible to the real considered processes. Generally, numerical methods are used to process this kind of study. In this paper, we propose an alternate way to process optimal Integrated Logistic Support policy determination when dealing with large, complex and distributed multi-policies industrial sites. This method is based on the use of behavioral Monte Carlo simulation, supported by Generalized Stochastic Petri Nets. (author)

  11. The Integrated Scorecard in support of corporate sustainability strategies.

    Science.gov (United States)

    Journeault, Marc

    2016-11-01

    Organizations have increasingly recognized the importance and benefits of developing a sustainability strategy that incorporates environmental and social responsibilities. However, the simultaneous integration of the economic, environmental and social aspects remains a major concern for organizations. The Sustainability Balanced Scorecard (SBSC) represents one of the most promising strategic tools to help organizations face these challenges and support their sustainability strategy. However, past research has provided unclear, incomplete and even contradictory SBSC frameworks while offering little knowledge about how to integrate stakeholder management as well as environmental and social performance within the balanced scorecard to successfully support a corporate sustainability strategy. The aim of this study is to address these issues and limitations by proposing the Integrated Scorecard, a specific SBSC that integrates the three pillars of sustainability performance within four different perspectives, namely environmental, social and economic performance, stakeholder management, internal business processes, and skills and capabilities. This study provides a conceptual approach to the Integrated Scorecard and illustrates, through the use of two practical illustrations, the ability of this framework to support the corporate sustainability strategy by identifying the core sustainability objectives that organizations should achieve when creating value, facilitating the understanding of the contribution of environmental and social initiatives on economic performance, allowing the monitoring and measurement of the strategy's level of achievement, and creating synergy between sustainability performance management and reporting. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. Integrating Collaborative and Decentralized Models to Support Ubiquitous Learning

    Science.gov (United States)

    Barbosa, Jorge Luis Victória; Barbosa, Débora Nice Ferrari; Rigo, Sandro José; de Oliveira, Jezer Machado; Rabello, Solon Andrade, Jr.

    2014-01-01

    The application of ubiquitous technologies in the improvement of education strategies is called Ubiquitous Learning. This article proposes the integration between two models dedicated to support ubiquitous learning environments, called Global and CoolEdu. CoolEdu is a generic collaboration model for decentralized environments. Global is an…

  13. Measuring School Principals' Support for ICT Integration in Palermo, Italy

    Science.gov (United States)

    Polizzi, Gabriella

    2011-01-01

    School principals play an important role in managing media and technology integration into school teaching since they can foster the use of information communication technologies (ICT) at a strategic level, even supporting the introduction of media literacy education activities into teaching. Starting from a review on the role of principals'…

  14. System Engineering and Integration of Controls for Advanced Life Support

    Science.gov (United States)

    Overland, David; Hoo, Karlene; Ciskowski, Marvin

    2006-01-01

    The Advanced Integration Matrix (AIM) project at the Johnson Space Center (JSC) was chartered to study and solve systems-level integration issues for exploration missions. One of the first issues identified was an inability to conduct trade studies on control system architectures due to the absence of mature evaluation criteria. Such architectures are necessary to enable integration of regenerative life support systems. A team was formed to address issues concerning software and hardware architectures and system controls.. The team has investigated what is required to integrate controls for the types of non-linear dynamic systems encountered in advanced life support. To this end, a water processing bioreactor testbed is being developed which will enable prototyping and testing of integration strategies and technologies. Although systems such as the water bioreactors exhibit the complexities of interactions between control schemes most vividly, it is apparent that this behavior and its attendant risks will manifest itself among any set of interdependent autonomous control systems. A methodology for developing integration requirements for interdependent and autonomous systems is a goal of this team and this testbed. This paper is a high-level summary of the current status of the investigation, the issues encountered, some tentative conclusions, and the direction expected for further research.

  15. Supporting learner-centered technology integration through situated mentoring

    Science.gov (United States)

    Rosenberg, Marian Goode

    Situated mentoring was used as a professional development method to help 11 high school science teachers integrate learner-centered technology. The teachers' learner-centered technology beliefs and practices as well as their perception of barriers to learner-centered technology integration were explored before and after participating in the mentoring program. In addition, the participants' thoughts about the effectiveness of various components of the mentoring program were analyzed along with the mentor's observations of their practices. Situated mentoring can be effective for supporting learner-centered technology integration, in particular decreasing the barriers teachers experience. Goal setting, collaborative planning, reflection, and onsite just-in-time support were thought to be the most valuable components of the mentoring program.

  16. Instrumentation Needs for Integral Primary System Reactors (IPSRs) - Task 1 Final Report

    International Nuclear Information System (INIS)

    Gary D Storrick; Bojan Petrovic; Luca Oriani; Lawrence E Conway; Diego Conti

    2005-01-01

    This report presents the results of the Westinghouse work performed under Task 1 of this Financial Assistance Award and satisfies a Level 2 Milestone for the project. While most of the signals required for control of IPSRs are typical of other PWRs, the integral configuration poses some new challenges in the design or deployment of the sensors/instrumentation and, in some cases, requires completely new approaches. In response to this consideration, the overall objective of Task 1 was to establish the instrumentation needs for integral reactors, provide a review of the existing solutions where available, and, identify research and development needs to be addressed to enable successful deployment of IPSRs. The starting point for this study was to review and synthesize general characteristics of integral reactors, and then to focus on a specific design. Due to the maturity of its design and availability of design information to Westinghouse, IRIS (International Reactor Innovative and Secure) was selected for this purpose. The report is organized as follows. Section 1 is an overview. Section 2 provides background information on several representative IPSRs, including IRIS. A review of the IRIS safety features and its protection and control systems is used as a mechanism to ensure that all critical safety-related instrumentation needs are addressed in this study. Additionally, IRIS systems are compared against those of current advanced PWRs. The scope of this study is then limited to those systems where differences exist, since, otherwise, the current technology already provides an acceptable solution. Section 3 provides a detailed discussion on instrumentation needs for the representative IPSR (IRIS) with detailed qualitative and quantitative requirements summarized in the exhaustive table included as Appendix A. Section 3 also provides an evaluation of the current technology and the instrumentation used for measurement of required parameters in current PWRs. Section 4

  17. Design integration of favorable geometry, structural support and containment

    International Nuclear Information System (INIS)

    Purcell, J.A.; McGehee, G.A.

    1991-07-01

    In designs for fissile processes at Savannah River site, different approaches have been used to provide engineered margins of safety for criticality with containment and seismic resistance as additional requirements. These requirements are frequently at odds in engineered systems. This paper proposes a plan to take advantage of vessels with favorable geometry to provide seismic resistance and to support a glovebox for containment. Thin slab tanks, small diameter pencil tanks, annular tanks, and other novel designs have been used for criticality safety. The requirement for DBE seismic resistance and rigid control of dimensions leads the designer to consider annular tanks for meeting these requirements. The high strength of annular tanks may logically be used to support secondary containment. Hands-on access to all instruments, piping etc. within containment can be provided through gloveports, thus a specialized glovebox. This paper examines the advantages of using an annular tank design to provide favorable geometry, structural support and containment

  18. An Instrument to Measure Maturity of Integrated Care: A First Validation Study

    Directory of Open Access Journals (Sweden)

    Liset Grooten

    2018-01-01

    Full Text Available Introduction: Lessons captured from interviews with 12 European regions are represented in a new instrument, the B3-Maturity Model (B3-MM. B3-MM aims to assess maturity along 12 dimensions reflecting the various aspects that need to be managed in order to deliver integrated care. The objective of the study was to test the content validity of B3-MM as part of SCIROCCO (Scaling Integrated Care into Context, a European Union funded project. Methods: A literature review was conducted to compare B3-MM’s 12 dimensions and their measurement scales with existing measures and instruments that focus on assessing the development of integrated care. Subsequently, a three-round survey conducted through a Delphi study with international experts in the field of integrated care was performed to test the relevance of: 1 the dimensions, 2 the maturity indicators and 3 the assessment scale used in B3-MM. Results: The 11 articles included in the literature review confirmed all the dimensions described in the original version of B3-MM. The Delphi study rounds resulted in various phrasing amendments of indicators and assessment scale. Full agreement among the experts on the relevance of the 12 B3-MM dimensions, their indicators, and assessment scale was reached after the third Delphi round. Conclusion and discussion: The B3-MM dimensions, maturity indicators and assessment scale showed satisfactory content validity. While the B3-MM is a unique instrument based on existing knowledge and experiences of regions in integrated care, further testing is needed to explore other measurement properties of B3-MM.

  19. An Instrument to Measure Maturity of Integrated Care: A First Validation Study

    Science.gov (United States)

    2018-01-01

    Introduction: Lessons captured from interviews with 12 European regions are represented in a new instrument, the B3-Maturity Model (B3-MM). B3-MM aims to assess maturity along 12 dimensions reflecting the various aspects that need to be managed in order to deliver integrated care. The objective of the study was to test the content validity of B3-MM as part of SCIROCCO (Scaling Integrated Care into Context), a European Union funded project. Methods: A literature review was conducted to compare B3-MM’s 12 dimensions and their measurement scales with existing measures and instruments that focus on assessing the development of integrated care. Subsequently, a three-round survey conducted through a Delphi study with international experts in the field of integrated care was performed to test the relevance of: 1) the dimensions, 2) the maturity indicators and 3) the assessment scale used in B3-MM. Results: The 11 articles included in the literature review confirmed all the dimensions described in the original version of B3-MM. The Delphi study rounds resulted in various phrasing amendments of indicators and assessment scale. Full agreement among the experts on the relevance of the 12 B3-MM dimensions, their indicators, and assessment scale was reached after the third Delphi round. Conclusion and discussion: The B3-MM dimensions, maturity indicators and assessment scale showed satisfactory content validity. While the B3-MM is a unique instrument based on existing knowledge and experiences of regions in integrated care, further testing is needed to explore other measurement properties of B3-MM. PMID:29588644

  20. Digital Technologies Supporting Person-Centered Integrated Care - A Perspective.

    Science.gov (United States)

    Øvretveit, John

    2017-09-25

    Shared electronic health and social care records in some service systems are already showing some of the benefits of digital technology and digital data for integrating health and social care. These records are one example of the beginning "digitalisation" of services that gives a glimpse of the potential of digital technology and systems for building coordinated and individualized integrated care. Yet the promise has been greater than the benefits, and progress has been slow compared to other industries. This paper describes for non-technical readers how information technology was used to support integrated care schemes in six EU services, and suggests practical ways forward to use the new opportunities to build person-centered integrated care.

  1. Modular Architecture for Integrated Model-Based Decision Support.

    Science.gov (United States)

    Gaebel, Jan; Schreiber, Erik; Oeser, Alexander; Oeltze-Jafra, Steffen

    2018-01-01

    Model-based decision support systems promise to be a valuable addition to oncological treatments and the implementation of personalized therapies. For the integration and sharing of decision models, the involved systems must be able to communicate with each other. In this paper, we propose a modularized architecture of dedicated systems for the integration of probabilistic decision models into existing hospital environments. These systems interconnect via web services and provide model sharing and processing capabilities for clinical information systems. Along the lines of IHE integration profiles from other disciplines and the meaningful reuse of routinely recorded patient data, our approach aims for the seamless integration of decision models into hospital infrastructure and the physicians' daily work.

  2. Integrating Parenting Support Within and Beyond the Pediatric Medical Home.

    Science.gov (United States)

    Linton, Julie M; Stockton, Maria Paz; Andrade, Berta; Daniel, Stephanie

    2018-01-01

    Positive parenting programs, developmental support services, and evidence-based home visiting programs can effectively provide parenting support and improve health and developmental outcomes for at-risk children. Few models, however, have integrated referrals for on-site support and home visiting programs into the provision of routine pediatric care within a medical home. This article describes an innovative approach, through partnership with a community-based organization, to deliver on-site and home visiting support services for children and families within and beyond the medical home. Our model offers a system of on-site services, including parenting, behavior, and/or development support, with optional intensive home visiting services. Assessment included description of the population served, delineation of services provided, and qualitative identification of key themes of the impact of services, illustrated by case examples. This replicable model describes untapped potential of the pediatric medical home as a springboard to mitigate risk and optimize children's health and development.

  3. Status Report on Efforts to Enhance Instrumentation to Support Advanced Test Reactor Irradiations

    Energy Technology Data Exchange (ETDEWEB)

    J. Rempe; D. Knudson; J. Daw; T. Unruh; B. Chase; R. Schley; J. Palmer; K. Condie

    2014-01-01

    The Department of Energy (DOE) designated the Advanced Test Reactor (ATR) as a National Scientific User Facility (NSUF) in April 2007 to support the growth of nuclear science and technology in the United States (US). By attracting new research users - universities, laboratories, and industry - the ATR NSUF facilitates basic and applied nuclear research and development, further advancing the nation's energy security needs. A key component of the ATR NSUF effort at the Idaho National Laboratory (INL) is to design, develop, and deploy new in-pile instrumentation techniques that are capable of providing real-time measurements of key parameters during irradiation. To address this need, an assessment of instrumentation available and under-development at other test reactors was completed. Based on this initial review, recommendations were made with respect to what instrumentation is needed at the ATR, and a strategy was developed for obtaining these sensors. In 2009, a report was issued documenting this program’s strategy and initial progress toward accomplishing program objectives. Since 2009, annual reports have been issued to provide updates on the program strategy and the progress made on implementing the strategy. This report provides an update reflecting progress as of January 2014.

  4. Integration of element technology and system supporting thermonuclear fusion

    International Nuclear Information System (INIS)

    2003-01-01

    A special committee for integrated system technology survey on thermonuclear fusion (TNF) was begun on June, 1999, under an aim to generally summarize whole of shapes on technology to realize TNF reactor to summarize present state of every technologies and their positioning in whole of their TNF technology. On a base of survey of these recent informations, this report is comprehensively summarized for an integrated system technology on TNF. It has outlines on magnetic field enclosing method, outlines on inertia enclosing method, element technology supporting TNF, new power generation techniques, and ripple effects on TNF technology. (G.K.)

  5. Construction of an integrated database to support genomic sequence analysis

    Energy Technology Data Exchange (ETDEWEB)

    Gilbert, W.; Overbeek, R.

    1994-11-01

    The central goal of this project is to develop an integrated database to support comparative analysis of genomes including DNA sequence data, protein sequence data, gene expression data and metabolism data. In developing the logic-based system GenoBase, a broader integration of available data was achieved due to assistance from collaborators. Current goals are to easily include new forms of data as they become available and to easily navigate through the ensemble of objects described within the database. This report comments on progress made in these areas.

  6. Integration issues in virtual enterprises supported by an architectural framework

    DEFF Research Database (Denmark)

    Zwegers, Arian; Hannus, Matti; Tølle, Martin

    2001-01-01

    enterprises, especially concerning integration issues. This paper lays down an architectural framework, called VERAM, which aims to support the set-up and operation of virtual enterprises. Five different levels of integration are identified. They should all be addressed during the formation of a virtual......Nowadays, enterprises cooperate more extensively with other enterprises during the entire product life cycle. Temporary alliances between various enterprises emerge such as those in Virtual Enterprises. However, many enterprises experience difficulties in the formation and operation of virtual...

  7. The Electric and Magnetic Field Instrument Suite and Integrated Science (EMFISIS) on RBSP

    Czech Academy of Sciences Publication Activity Database

    Kletzing, C. A.; Kurth, W. S.; Acuna, M.; MacDowall, R. J.; Torbert, R. B.; Averkamp, T.; Bodet, D.; Bounds, S. R.; Chutter, M.; Connerney, J.; Crawford, D.; Dolan, J. S.; Dvorsky, R.; Hospodarsky, G. B.; Howard, J.; Jordanova, V.; Johnson, R. A.; Kirchner, D. L.; Mokrzycki, B.; Needell, G.; Odom, J.; Mark, D.; Pfaff Jr, R.; Phillips, J. R.; Piker, C. V.; Remington, S. L.; Rowland, D.; Santolík, Ondřej; Schnurr, R.; Sheppard, D.; Smith, C. W.; Thorne, R. M.; Tyler, J.

    2013-01-01

    Roč. 179, 1-4 (2013), s. 127-181 ISSN 0038-6308 Grant - others: NASA (US) 921647 Institutional support: RVO:68378289 Keywords : radiation belt physics * wave measurements * magnetometer measurements * space flight instruments * RBSP * radiation belt storm probes * Van Allen probes * whistler waves * geomagnetic storms * space weather Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 5.874, year: 2013 http://link.springer.com/article/10.1007%2Fs11214-013-9993-6#page-1

  8. An Integrated XRF/XRD Instrument for Mars Exobiology and Geology Experiments

    Science.gov (United States)

    Koppel, L. N.; Franco, E. D.; Kerner, J. A.; Fonda, M. L.; Schwartz, D. E.; Marshall, J. R.

    1993-01-01

    By employing an integrated x-ray instrument on a future Mars mission, data obtained will greatly augment those returned by Viking; details characterizing the past and present environment on Mars and those relevant to the possibility of the origin and evolution of life will be acquired. A combined x-ray fluorescence/x-ray diffraction (XRF/XRD) instrument was breadboarded and demonstrated to accommodate important exobiology and geology experiment objectives outlined for MESUR and future Mars missions. Among others, primary objectives for the exploration of Mars include the intense study of local areas on Mars to establish the chemical, mineralogical, and petrological character of different components of the surface material; to determine the distribution, abundance, and sources and sinks of volatile materials, including an assessment of the biologic potential, now and during past epoches; and to establish the global chemical and physical characteristics of the Martian surface. The XRF/XRD breadboard instrument identifies and quantifies soil surface elemental, mineralogical, and petrological characteristics and acquires data necessary to address questions on volatile abundance and distribution. Additionally, the breadboard is able to characterize the biogenic element constituents of soil samples providing information on the biologic potential of the Mars environment. Preliminary breadboard experiments confirmed the fundamental instrument design approach and measurement performance.

  9. The Focal Plane Assembly for the Athena X-Ray Integral Field Unit Instrument

    Science.gov (United States)

    Jackson, B. D.; Van Weers, H.; van der Kuur, J.; den Hartog, R.; Akamatsu, H.; Argan, A.; Bandler, S. R.; Barbera, M.; Barret, D.; Bruijn, M. P.; hide

    2016-01-01

    This paper summarizes a preliminary design concept for the focal plane assembly of the X-ray Integral Field Unit on the Athena spacecraft, an imaging microcalorimeter that will enable high spectral resolution imaging and point-source spectroscopy. The instrument's sensor array will be a 3840-pixel transition edge sensor (TES) microcalorimeter array, with a frequency domain multiplexed SQUID readout system allowing this large-format sensor array to be operated within the thermal constraints of the instrument's cryogenic system. A second TES detector will be operated in close proximity to the sensor array to detect cosmic rays and secondary particles passing through the sensor array for off-line coincidence detection to identify and reject events caused by the in-orbit high-energy particle background. The detectors, operating at 55 mK, or less, will be thermally isolated from the instrument cryostat's 2 K stage, while shielding and filtering within the FPA will allow the instrument's sensitive sensor array to be operated in the expected environment during both on-ground testing and in-flight operation, including stray light from the cryostat environment, low-energy photons entering through the X-ray aperture, low-frequency magnetic fields, and high-frequency electric fields.

  10. Adaptive autobiographical memory in younger and older adults: the indirect association of integrative and instrumental reminiscence with depressive symptoms.

    Science.gov (United States)

    Hallford, D J; Mellor, D; Cummins, R A

    2013-01-01

    Despite the established effectiveness of reminiscence-based interventions for depression, little research exists into the pathways through which specific reminiscence functions are related to depressive symptoms. Drawing on theory of the mechanisms of change in cognitive-reminiscence therapy, the current study tests the hypothesised indirect associations of adaptive integrative and instrumental reminiscence functions with depressive symptoms and whether these relationships might differ among younger and older adults. Questionnaires were completed by a large community sample of the Australian population. Multiple mediation models were tested in two groups: younger adults (n = 730, M age = 52.24, SD=9.84) and older adults (n = 725, M age= 73.59, SD=6.29). Results were consistent across age groups, indicating that there was direct relationship between these reminiscence functions and depressive symptoms, but that integrative reminiscence is indirectly associated with depressive symptoms through meaning in life, self-esteem, and optimism, and that instrumental reminiscence is indirectly associated with depressive symptoms through primary control and self-efficacy. This study provides support for the relationships between constructs underlying the proposed mechanisms of change in cognitive-reminiscence therapy for the treatment of depression, and suggests these relationships are similar for younger and older adults.

  11. Standards to support information systems integration in anatomic pathology.

    Science.gov (United States)

    Daniel, Christel; García Rojo, Marcial; Bourquard, Karima; Henin, Dominique; Schrader, Thomas; Della Mea, Vincenzo; Gilbertson, John; Beckwith, Bruce A

    2009-11-01

    Integrating anatomic pathology information- text and images-into electronic health care records is a key challenge for enhancing clinical information exchange between anatomic pathologists and clinicians. The aim of the Integrating the Healthcare Enterprise (IHE) international initiative is precisely to ensure interoperability of clinical information systems by using existing widespread industry standards such as Digital Imaging and Communication in Medicine (DICOM) and Health Level Seven (HL7). To define standard-based informatics transactions to integrate anatomic pathology information to the Healthcare Enterprise. We used the methodology of the IHE initiative. Working groups from IHE, HL7, and DICOM, with special interest in anatomic pathology, defined consensual technical solutions to provide end-users with improved access to consistent information across multiple information systems. The IHE anatomic pathology technical framework describes a first integration profile, "Anatomic Pathology Workflow," dedicated to the diagnostic process including basic image acquisition and reporting solutions. This integration profile relies on 10 transactions based on HL7 or DICOM standards. A common specimen model was defined to consistently identify and describe specimens in both HL7 and DICOM transactions. The IHE anatomic pathology working group has defined standard-based informatics transactions to support the basic diagnostic workflow in anatomic pathology laboratories. In further stages, the technical framework will be completed to manage whole-slide images and semantically rich structured reports in the diagnostic workflow and to integrate systems used for patient care and those used for research activities (such as tissue bank databases or tissue microarrayers).

  12. Instrumentation and control program to support modernization of safety and control in NPPs

    International Nuclear Information System (INIS)

    Wilkinson, D.; James, R.; Naser, J.; Torok, R.

    1997-01-01

    The original analog IandC equipment of most operating nuclear power plants requires increasing maintenance efforts to sustain system performance. Decreasing availability of replacement parts and support organizations for analog technology accentuate obsolescence problems and resultant OandM cost increases. Modern technology, especially digital systems, offers improved functionality, performance and reliability; solutions to obsolescence of equipment; reduction in OandM costs; and the potential to enhance safety. Digital systems with their inherent advantages will be implemented only if reliable and cost-effective implementation is achieved and if the upgraded system supports reduced power production costs. EPRI and its member utilities are working together under the Integrated IandC Upgrade Initiative to address IandC issues. The present paper describes and gives the status of EPRI's Integrated IandC Upgrade Initiative. (author)

  13. Integrated Multidisciplinary Constrained Optimization of Offshore Support Structures

    International Nuclear Information System (INIS)

    Haghi, Rad; Molenaar, David P; Ashuri, Turaj; Van der Valk, Paul L C

    2014-01-01

    In the current offshore wind turbine support structure design method, the tower and foundation, which form the support structure are designed separately by the turbine and foundation designer. This method yields a suboptimal design and it results in a heavy, overdesigned and expensive support structure. This paper presents an integrated multidisciplinary approach to design the tower and foundation simultaneously. Aerodynamics, hydrodynamics, structure and soil mechanics are the modeled disciplines to capture the full dynamic behavior of the foundation and tower under different environmental conditions. The objective function to be minimized is the mass of the support structure. The model includes various design constraints: local and global buckling, modal frequencies, and fatigue damage along different stations of the structure. To show the usefulness of the method, an existing SWT-3.6-107 offshore wind turbine where its tower and foundation are designed separately is used as a case study. The result of the integrated multidisciplinary design optimization shows 12.1% reduction in the mass of the support structure, while satisfying all the design constraints

  14. Space Station - An integrated approach to operational logistics support

    Science.gov (United States)

    Hosmer, G. J.

    1986-01-01

    Development of an efficient and cost effective operational logistics system for the Space Station will require logistics planning early in the program's design and development phase. This paper will focus on Integrated Logistics Support (ILS) Program techniques and their application to the Space Station program design, production and deployment phases to assure the development of an effective and cost efficient operational logistics system. The paper will provide the methodology and time-phased programmatic steps required to establish a Space Station ILS Program that will provide an operational logistics system based on planned Space Station program logistics support.

  15. Structural integrity of graphite core support structures of HTTR

    International Nuclear Information System (INIS)

    Inagaki, Yoshiyuki; Iyoku, Tatsuo; Toyota, Junji; Sato, Sadao; Shiozawa, Shusaku

    1990-02-01

    The graphite core support structures (GCSSs) of the HTTR (High Temperature Engineering Test Reactor) are an arrangement of graphite blocks and posts that support the core and provide a lower plenum and a hot-leg path for the primary coolant. The GCSSs are designed not to be replaced by new items during plant life time (about twenty years). To maintain structural integrity of the GCSSs, conservative design has been made sufficiently on the basis of structural tests. The present study confirmed that reactor safety was still maintained even if failure and destruction of the GCSSs is supposed to occur. The GCSSs are fabricated under strict quality control and the observation and surveillance programs are planed to examine the structual integrity of the GCSSs during an operation. This paper describes the concept of design and quality control and summarizes structural tests, observation and surveillance programs. (author)

  16. Integration between a sales support system and a simulation tool

    OpenAIRE

    Wahlström, Ola

    2005-01-01

    InstantPlanner is a sales support system for the material handling industry, visualizing and calculating designs faster and more correctly than other tools on the market. AutoMod is a world leading simulation tool used in the material handling industry to optimize and calculate appropriate configuration designs. Both applications are favorable in their own area provide a great platform for integration with the properties of fast designing, correct product calculations, great simulation capabi...

  17. Project Orion, Environmental Control and Life Support System Integrated Studies

    Science.gov (United States)

    Russell, James F.; Lewis, John F.

    2008-01-01

    Orion is the next vehicle for human space travel. Humans will be sustained in space by the Orion subystem, environmental control and life support (ECLS). The ECLS concept at the subsystem level is outlined by function and technology. In the past two years, the interface definition with other subsystems has increased through different integrated studies. The paper presents the key requirements and discusses three recent studies (e.g., unpressurized cargo) along with the respective impacts on the ECLS design moving forward.

  18. Integration of a satellite ground support system based on analysis of the satellite ground support domain

    Science.gov (United States)

    Pendley, R. D.; Scheidker, E. J.; Levitt, D. S.; Myers, C. R.; Werking, R. D.

    1994-11-01

    This analysis defines a complete set of ground support functions based on those practiced in real space flight operations during the on-orbit phase of a mission. These functions are mapped against ground support functions currently in use by NASA and DOD. Software components to provide these functions can be hosted on RISC-based work stations and integrated to provide a modular, integrated ground support system. Such modular systems can be configured to provide as much ground support functionality as desired. This approach to ground systems has been widely proposed and prototyped both by government institutions and commercial vendors. The combined set of ground support functions we describe can be used as a standard to evaluate candidate ground systems. This approach has also been used to develop a prototype of a modular, loosely-integrated ground support system, which is discussed briefly. A crucial benefit to a potential user is that all the components are flight-qualified, thus giving high confidence in their accuracy and reliability.

  19. Technology Integration Initiative In Support of Outage Management

    Energy Technology Data Exchange (ETDEWEB)

    Gregory Weatherby; David Gertman

    2012-07-01

    Plant outage management is a high priority concern for the nuclear industry from cost and safety perspectives. Often, command and control during outages is maintained in the outage control center where many of the underlying technologies supporting outage control are the same as those used in the 1980’s. This research reports on the use of advanced integrating software technologies and hand held mobile devices as a means by which to reduce cycle time, improve accuracy, and enhance transparency among outage team members. This paper reports on the first phase of research supported by the DOE Light Water Reactor Sustainability (LWRS) Program that is performed in close collaboration with industry to examine the introduction of newly available technology allowing for safe and efficient outage performance. It is thought that this research will result in: improved resource management among various plant stakeholder groups, reduced paper work, and enhanced overall situation awareness for the outage control center management team. A description of field data collection methods, including personnel interview data, success factors, end-user evaluation and integration of hand held devices in achieving an integrated design are also evaluated. Finally, the necessity of obtaining operations cooperation support in field studies and technology evaluation is acknowledged.

  20. Assessing the quality of decision support technologies using the International Patient Decision Aid Standards instrument (IPDASi.

    Directory of Open Access Journals (Sweden)

    Glyn Elwyn

    Full Text Available To describe the development, validation and inter-rater reliability of an instrument to measure the quality of patient decision support technologies (decision aids.Scale development study, involving construct, item and scale development, validation and reliability testing.There has been increasing use of decision support technologies--adjuncts to the discussions clinicians have with patients about difficult decisions. A global interest in developing these interventions exists among both for-profit and not-for-profit organisations. It is therefore essential to have internationally accepted standards to assess the quality of their development, process, content, potential bias and method of field testing and evaluation.Scale development study, involving construct, item and scale development, validation and reliability testing.Twenty-five researcher-members of the International Patient Decision Aid Standards Collaboration worked together to develop the instrument (IPDASi. In the fourth Stage (reliability study, eight raters assessed thirty randomly selected decision support technologies.IPDASi measures quality in 10 dimensions, using 47 items, and provides an overall quality score (scaled from 0 to 100 for each intervention. Overall IPDASi scores ranged from 33 to 82 across the decision support technologies sampled (n = 30, enabling discrimination. The inter-rater intraclass correlation for the overall quality score was 0.80. Correlations of dimension scores with the overall score were all positive (0.31 to 0.68. Cronbach's alpha values for the 8 raters ranged from 0.72 to 0.93. Cronbach's alphas based on the dimension means ranged from 0.50 to 0.81, indicating that the dimensions, although well correlated, measure different aspects of decision support technology quality. A short version (19 items was also developed that had very similar mean scores to IPDASi and high correlation between short score and overall score 0.87 (CI 0.79 to 0.92.This work

  1. Semi-custom integrated circuit amplifier and level discriminator for nuclear and space instruments

    International Nuclear Information System (INIS)

    Hahn, S.F.; Cafferty, M.M.

    1991-01-01

    This paper reports on the development an extra fast current feedback amplifier and a level discriminator employing a dielectrically-isolated bipolar, semi-custom Application Specific Integrated Circuit (ASIC) process. These devices are specifically designed for instruments aboard spacecrafts or in portable packages requiring low power and weight. The amplifier adopts current feedback for a unity-gain bandwidth of 90 MHz while consuming 50 mW. The level discriminator uses a complementary output driver for balanced positive and negative response times. The power consumption of these devices can be programmed by external resistors for optimal speed and power trade-off

  2. Semi-custom integrated circuit amplifier and level discriminator for nuclear and space instruments

    International Nuclear Information System (INIS)

    Hahn, S.F.; Cafferty, M.M.

    1990-01-01

    This paper reports an extra fast current feedback amplifier and a level discriminator developed employing a dielectrically isolated bipolar, semi-custom Application Specific Integrated Circuit (ASIC) process. These devices are specifically designed for instruments aboard spacecrafts or in portable packages requiring low power and weight. The amplifier adopts current feedback for a unity- gain bandwidth of 90 MHz while consuming 50 mW. The level discriminator uses a complementary output driver for balanced positive and negative response times. The power consumption of these devices can be programmed by external resistors for optimal speed and power trade-off

  3. Geo-portal as a planning instrument: supporting decision making and fostering market potential of Energy efficiency in buildings

    Science.gov (United States)

    Cuca, Branka; Brumana, Raffaella; Oreni, Daniela; Iannaccone, Giuliana; Sesana, Marta Maria

    2014-03-01

    Steady technological progress has led to a noticeable advancement in disciplines associated with Earth observation. This has enabled information transition regarding changing scenarios, both natural and urban, to occur in (almost) real time. In particular, the need for integration on a local scale with the wider territorial framework has occurred in analysis and monitoring of built environments over the last few decades. The progress of Geographic Information (GI) science has provided significant advancements when it comes to spatial analysis, while the almost free availability of the internet has ensured a fast and constant exchange of geo-information, even for everyday users' requirements. Due to its descriptive and semantic nature, geo-spatial information is capable of providing a complete overview of a certain phenomenon and of predicting the implications within the natural, social and economic context. However, in order to integrate geospatial data into decision making processes, it is necessary to provide a specific context, which is well supported by verified data. This paper investigates the potentials of geo-portals as planning instruments developed to share multi-temporal/multi-scale spatial data, responding to specific end-users' demands in the case of Energy efficiency in Buildings (EeB) across European countries. The case study regards the GeoCluster geo-portal and mapping tool (Project GE2O, FP7), built upon a GeoClustering methodology for mapping of indicators relevant for energy efficiency technologies in the construction sector.

  4. MODERN TENDENCIES OF USING INTEGRATIVE APPROACH TO ORGANIZING ART TEACHERS’ INSTRUMENTAL AND PERFORMING TRAINING

    Directory of Open Access Journals (Sweden)

    Zhanna Kartashova

    2016-04-01

    Full Text Available In the article the modern tendencies of using integrative approach to organizing art teachers’ instrumental and performing training. The concept “integration” is singled out; it is defined as the process of recovery, replenishment, combining previously isolated parts; moving of the system to a great organic integrity. It is disclosed that the integration means considering multidimensionality of element features which are being integrated while accumulating quantitative features and emerging a new quality and individual features of integral elements are saved. It is proved that integrating is interrelation of art varieties in the process of their aesthetic and educational impact on pupils that is the whole perception of a work (its content and its emotional, rational, ethical and aesthetic form in the unity of tasks of developing artistic and aesthetic senses, thoughts, tastes and pupils’ ideals. It is thought that integration in art pedagogy is held at three levels: internal artistic and aesthetic synthesis of various arts organically combined with students creative activity; interdisciplinary humanistic synthesis of the arts, the native language, literature, and folklore; looking for semantic blocks, images, concepts that have universal meaning, which, entering all spheres of human consciousness, such as science and mathematics, seamlessly combining them into a coherent system. It is noted that the most efficient approach is appeal to the learning subjects of Humanities cycle – music, literature and art. It is concluded that designing of training should be started with the analyzing prospective art teacher’s activity. It should be understood what the teacher has to do, not in general formulation, but at the level of actions and operations.

  5. Meteorological Support Interface Control Working Group (MSICWG) Instrumentation, Data Format, and Networks Document

    Science.gov (United States)

    Brenton, James; Roberts, Barry C.

    2017-01-01

    The purpose of this document is to provide an overview of instrumentation discussed at the Meteorological Interface Control Working Group (MSICWG), a reference for data formats currently used by members of the group, a summary of proposed formats for future use by the group, an overview of the data networks of the group's members. This document will be updated as new systems are introduced, old systems are retired, and when the MSICWG community necessitates a change to the formats. The MSICWG consists of personnel from the National Aeronautics and Space Administration (NASA) Kennedy Space Center (KSC), NASA Marshall Space Flight Center (MSFC), NASA Johnson Space Center (JSC), National Oceanic and Atmospheric Administration National Weather Service Spaceflight Meteorology Group (SMG), and the United States Air Force (USAF) 45th Space Wing and Weather Squadron. The purpose of the group is to coordinate the distribution of weather related data to support NASA space launch related activities.

  6. INSTRUMENTS USED TO SUPPORT ACTIVE SALES IN THE COMPANY OF FOOD ECONOMY – A CASE STUDY

    Directory of Open Access Journals (Sweden)

    Agnieszka Piotrowska

    2015-06-01

    Full Text Available Changing environment requires enterprises to meet the needs of customers. Being on the market, survival and development of the company are determined not only by well qualifi ed staff but above all a happy customer. Therefore, it is important to use appropriate instruments to support active sales of the company. The study was conducted among 64 employees working in the organization studied. The study aimed to assess the knowledge and expertise of the staff in terms of the tools used in the enterprise for communication with the market. The study shows that the company has a well-developed system of communication with the market. Advertising agents that are used in the audited company are primarily the Internet, magazines, and outdoor advertising. Company’s gadgets are as well as awards for regular customers are the most popular among the target group consumer promotion tools.

  7. Simplified risk model support for environmental management integration

    International Nuclear Information System (INIS)

    Eide, S.A.; Jones, J.L.; Wierman, T.E.

    1998-01-01

    This paper summarizes the process and results of human health risk assessments of the US Department of Energy (DOE) complex-wide programs for high-level waste, transuranic waste, low-level, mixed low-level waste, and spent nuclear fuel. The DOE baseline programs and alternatives for these five material types were characterized by disposition maps (material flow diagrams) and supporting information in the May 1997 report 'A Contractor Report to the Department of Energy on Environmental Baseline Programs and Integration Opportunities' (Discussion Draft). Risk analyses were performed using the Simplified Risk Model (SRM), developed to support DOE Environmental Management Integration studies. The SRM risk analyses consistently and comprehensively cover the life cycle programs for the five material types, from initial storage through final disposition. Risk results are presented at several levels: DOE complex-wide, material type program, individual DOE sites, and DOE site activities. The detailed risk results are documented in the February 1998 report 'Human Health Risk Comparisons for Environmental Management Baseline Programs and Integration Opportunities' (Discussion Draft)

  8. New In-pile Instrumentation to Support Fuel Cycle Research and Development

    Energy Technology Data Exchange (ETDEWEB)

    J. Rempe; H. MacLean; R. Schley; D. Hurley; J. Daw; S. Taylor; J. Smith; J. Svoboda; D. Kotter; D. Knudson; M. Guers; S. C. Wilkins

    2011-01-01

    New and enhanced nuclear fuels are a key enabler for new and improved reactor technologies. For example, the goals of the next generation nuclear plant (NGNP) will not be met without irradiations successfully demonstrating the safety and reliability of new fuels. Likewise, fuel reliability has become paramount in ensuring the competitiveness of nuclear power plants. Recently, the Office of Nuclear Energy in the Department of Energy (DOE-NE) launched a new direction in fuel research and development that emphasizes an approach relying on first principle models to develop optimized fuel designs that offer significant improvements over current fuels. To facilitate this approach, high fidelity, real-time, data are essential for characterizing the performance of new fuels during irradiation testing. A three-year strategic research program is proposed for developing the required test vehicles with sensors of unprecedented accuracy and resolution for obtaining the data needed to characterize three-dimensional changes in fuel microstructure during irradiation testing. When implemented, this strategy will yield test capsule designs that are instrumented with new sensor technologies for the Advanced Test Reactor (ATR) and other irradiation locations for the Fuel Cycle Research and Development (FC R&D) program. Prior laboratory testing, and as needed, irradiation testing, of these sensors will have been completed to give sufficient confidence that the irradiation tests will yield the required data. Obtaining these sensors must draw upon the expertise of a wide-range of organizations not currently supporting nuclear fuels research. This document defines this strategic program and provides the necessary background information related to fuel irradiation testing, desired parameters for detection, and an overview of currently available in-pile instrumentation. In addition, candidate sensor technologies are identified in this document, and a list of proposed criteria for ranking

  9. Integrated ADIOS-IGENPRO operator advisory support system

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Dong Young; Park, J. H.; Kim, J. T.; Kim, C. H.; Park, W. M.; Hwang, I. K.; Cheon, S. W.; Song, S. J

    2001-05-01

    The I and C systems and control rooms of nuclear power plants have been constructed by using the automatic control concept and changed to computer-based systems in nowadays. For Increase of an automation and CRT, the role of operators is changed to monitor the condition of the nuclear power plants. Therefore, the information that is offered to operators has to integrate in order for operator to understand the hole condition of plants. In commercial nuclear plants, raw data of sensors and components are shown in a control room. So, operators can not diagnose the condition of plants correctly. For a development of an integrated operator aid system which contain an alarm processing system and a fault diagnosis system, we integrated IGENPRO of ANL(Argonne National Lab.) and ADIOS of KAERI (Korea Atomic Energy Institute). IGENPRO is a fault diagnosis system contains three module such as PROTREN, PRODIAG and PROTREN. ADIOS is an alarm processing system that informs operators of important alarms. The integrated operator advisory support system developed in the research is composed of an alarm processing module and a fault diagnosis module. The alarm processing module shows important alarms to operator by using dynamic alarm filtering methods. The fault diagnosis module shows the cause of faults of sensors and hardwares.

  10. Integrated ADIOS-IGENPRO operator advisory support system

    International Nuclear Information System (INIS)

    Lee, Dong Young; Park, J. H.; Kim, J. T.; Kim, C. H.; Park, W. M.; Hwang, I. K.; Cheon, S. W.; Song, S. J.

    2001-05-01

    The I and C systems and control rooms of nuclear power plants have been constructed by using the automatic control concept and changed to computer-based systems in nowadays. For Increase of an automation and CRT, the role of operators is changed to monitor the condition of the nuclear power plants. Therefore, the information that is offered to operators has to integrate in order for operator to understand the hole condition of plants. In commercial nuclear plants, raw data of sensors and components are shown in a control room. So, operators can not diagnose the condition of plants correctly. For a development of an integrated operator aid system which contain an alarm processing system and a fault diagnosis system, we integrated IGENPRO of ANL(Argonne National Lab.) and ADIOS of KAERI (Korea Atomic Energy Institute). IGENPRO is a fault diagnosis system contains three module such as PROTREN, PRODIAG and PROTREN. ADIOS is an alarm processing system that informs operators of important alarms. The integrated operator advisory support system developed in the research is composed of an alarm processing module and a fault diagnosis module. The alarm processing module shows important alarms to operator by using dynamic alarm filtering methods. The fault diagnosis module shows the cause of faults of sensors and hardwares

  11. Integrated training support system for PWR operator training simulator

    International Nuclear Information System (INIS)

    Sakaguchi, Junichi; Komatsu, Yasuki

    1999-01-01

    The importance of operator training using operator training simulator has been recognized intensively. Since 1986, we have been developing and providing many PWR simulators in Japan. We also have developed some training support systems connected with the simulator and the integrated training support system to improve training effect and to reduce instructor's workload. This paper describes the concept and the effect of the integrated training support system and of the following sub-systems. We have PES (Performance Enhancement System) that evaluates training performance automatically by analyzing many plant parameters and operation data. It can reduce the deviation of training performance evaluation between instructors. PEL (Parameter and Event data Logging system), that is the subset of PES, has some data-logging functions. And we also have TPES (Team Performance Enhancement System) that is used aiming to improve trainees' ability for communication between operators. Trainee can have conversation with virtual trainees that TPES plays automatically. After that, TPES automatically display some advice to be improved. RVD (Reactor coolant system Visual Display) displays the distributed hydraulic-thermal condition of the reactor coolant system in real-time graphically. It can make trainees understand the inside plant condition in more detail. These sub-systems have been used in a training center and have contributed the improvement of operator training and have gained in popularity. (author)

  12. [Development of integrated support software for clinical nutrition].

    Science.gov (United States)

    Siquier Homar, Pedro; Pinteño Blanco, Manel; Calleja Hernández, Miguel Ángel; Fernández Cortés, Francisco; Martínez Sotelo, Jesús

    2015-09-01

    to develop an integrated computer software application for specialized nutritional support, integrated in the electronic clinical record, which detects automatically and early those undernourished patients or at risk of developing undernourishment, determining points of opportunity for improvement and evaluation of the results. the quality standards published by the Nutrition Work Group of the Spanish Society of Hospital Pharmacy (SEFH) and the recommendations by the Pharmacy Group of the Spanish Society of Parenteral and Enteral Nutrition (SENPE) have been taken into account. According to these quality standards, the nutritional support has to include the following healthcare stages or sub-processes: nutritional screening, nutritional assessment, plan for nutritional care, prescription, preparation and administration. this software allows to conduct, in an automated way, a specific nutritional assessment for those patients with nutritional risk, implementing, if necessary, a nutritional treatment plan, conducting follow-up and traceability of outcomes derived from the implementation of improvement actions, and quantifying to what extent our practice is close to the established standard. this software allows to standardize the specialized nutritional support from a multidisciplinary point of view, introducing the concept of quality control per processes, and including patient as the main customer. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

  13. Development of integrated support software for clinical nutrition

    Directory of Open Access Journals (Sweden)

    Pedro Siquier Homar

    2015-09-01

    Full Text Available Objectives: to develop an integrated computer software application for specialized nutritional support, integrated in the electronic clinical record, which detects automatically and early those undernourished patients or at risk of developing undernourishment, determining points of opportunity for improvement and evaluation of the results. Methods: the quality standards published by the Nutrition Work Group of the Spanish Society of Hospital Pharmacy (SEFH and the recommendations by the Pharmacy Group of the Spanish Society of Parenteral and Enteral Nutrition (SENPE have been taken into account. According to these quality standards, the nutritional support has to include the following healthcare stages or sub-processes: nutritional screening, nutritional assessment, plan for nutritional care, prescription, preparation and administration. Results: this software allows to conduct, in an automated way, a specific nutritional assessment for those patients with nutritional risk, implementing, if necessary, a nutritional treatment plan, conducting follow-up and traceability of outcomes derived from the implementation of improvement actions, and quantifying to what extent our practice is close to the established standard. Conclusions: this software allows to standardize the specialized nutritional support from a multidisciplinary point of view, introducing the concept of quality control per processes, and including patient as the main customer

  14. An integrated infrastructure in support of software development

    International Nuclear Information System (INIS)

    Antonelli, S; Bencivenni, M; De Girolamo, D; Giacomini, F; Longo, S; Manzali, M; Veraldi, R; Zani, S

    2014-01-01

    This paper describes the design and the current state of implementation of an infrastructure made available to software developers within the Italian National Institute for Nuclear Physics (INFN) to support and facilitate their daily activity. The infrastructure integrates several tools, each providing a well-identified function: project management, version control system, continuous integration, dynamic provisioning of virtual machines, efficiency improvement, knowledge base. When applicable, access to the services is based on the INFN-wide Authentication and Authorization Infrastructure. The system is being installed and progressively made available to INFN users belonging to tens of sites and laboratories and will represent a solid foundation for the software development efforts of the many experiments and projects that see the involvement of the Institute. The infrastructure will be beneficial especially for small- and medium-size collaborations, which often cannot afford the resources, in particular in terms of know-how, needed to set up such services.

  15. Long-term social integration and community support.

    Science.gov (United States)

    Gordon, Wayne A; Cantor, Joshua; Kristen, Dams-O'Connor; Tsaousides, Theodore

    2015-01-01

    TBI often results in reduced social participation. This decrease in social participation is independent of injury severity and time since injury. Thus, it is one of the many stable hallmarks of TBI. Changes in social participation have been related to many factors, including emotional dysregulation and disturbance and executive dysfunction. While there are evidenced-based treatments available to improve mood and executive functioning, none of the research has examined the impact of the various treatments on social participation or social integration. Therefore, while it is reasonable to expect that individuals who are feeling better about themselves and who improve their approach to day-to-day function will also experience increased social contact, there is no evidence to support this claim. This chapter reviews the literature on post-TBI social integration and its relationship to depression and executive dysfunction. In addition the intervention research in this area is briefly examined. © 2015 Elsevier B.V. All rights reserved.

  16. Clinical Ethics Support for Healthcare Personnel: An Integrative Literature Review.

    Science.gov (United States)

    Rasoal, Dara; Skovdahl, Kirsti; Gifford, Mervyn; Kihlgren, Annica

    2017-12-01

    This study describes which clinical ethics approaches are available to support healthcare personnel in clinical practice in terms of their construction, functions and goals. Healthcare personnel frequently face ethically difficult situations in the course of their work and these issues cover a wide range of areas from prenatal care to end-of-life care. Although various forms of clinical ethics support have been developed, to our knowledge there is a lack of review studies describing which ethics support approaches are available, how they are constructed and their goals in supporting healthcare personnel in clinical practice. This study engages in an integrative literature review. We searched for peer-reviewed academic articles written in English between 2000 and 2016 using specific Mesh terms and manual keywords in CINAHL, MEDLINE and Psych INFO databases. In total, 54 articles worldwide described clinical ethics support approaches that include clinical ethics consultation, clinical ethics committees, moral case deliberation, ethics rounds, ethics discussion groups, and ethics reflection groups. Clinical ethics consultation and clinical ethics committees have various roles and functions in different countries. They can provide healthcare personnel with advice and recommendations regarding the best course of action. Moral case deliberation, ethics rounds, ethics discussion groups and ethics reflection groups support the idea that group reflection increases insight into ethical issues. Clinical ethics support in the form of a "bottom-up" perspective might give healthcare personnel opportunities to think and reflect more than a "top-down" perspective. A "bottom-up" approach leaves the healthcare personnel with the moral responsibility for their choice of action in clinical practice, while a "top-down" approach risks removing such moral responsibility.

  17. Economic and policy instrument analyses in support of the scrap tire recycling program in Taiwan.

    Science.gov (United States)

    Chang, Ni-Bin

    2008-02-01

    Understanding the cost-effectiveness and the role of economic and policy instruments, such as the combined product tax-recycling subsidy scheme or a tradable permit, for scrap tire recycling has been of crucial importance in a market-oriented environmental management system. Promoting product (tire) stewardship on one hand and improving incentive-based recycling policy on the other hand requires a comprehensive analysis of the interfaces and interactions in the nexus of economic impacts, environmental management, environmental valuation, and cost-benefit analysis. This paper presents an assessment of the interfaces and interactions between the implementation of policy instruments and its associated economic evaluation for sustaining a scrap tire recycling program in Taiwan during the era of the strong economic growth of the late 1990s. It begins with an introduction of the management of the co-evolution between technology metrics of scrap tire recycling and organizational changes for meeting the managerial goals island-wide during the 1990s. The database collected and used for such analysis covers 17 major tire recycling firms and 10 major tire manufacturers at that time. With estimates of scrap tire generation and possible scale of subsidy with respect to differing tire recycling technologies applied, economic analysis eventually leads to identify the associated levels of product tax with respect to various sizes of new tires. It particularly demonstrates a broad perspective of how an integrated econometric and engineering economic analysis can be conducted to assist in implementing policy instruments for scrap tire management. Research findings indicate that different subsidy settings for collection, processing, and end use of scrap tires should be configured to ameliorate the overall managerial effectiveness. Removing the existing boundaries between designated service districts could strengthen the competitiveness of scrap tires recycling industry, helping to

  18. Review of Energy Storage System for Wind Power Integration Support

    DEFF Research Database (Denmark)

    Zhao, Haoran; Wu, Qiuwei; Hu, Shuju

    2015-01-01

    -discharging characteristics, Energy Storage System (ESS) is considered as an effective tool to enhance the flexibility and controllability not only of a specific wind farm, but also of the entire grid. This paper reviews the state of the art of the ESS technologies for wind power integration support from different aspects......With the rapid growth of wind energy development and increasing wind power penetration level, it will be a big challenge to operate the power system with high wind power penetration securely and reliably due to the inherent variability and uncertainty of wind power. With the flexible charging...

  19. Towards integrated crisis support of regional emergency networks.

    Science.gov (United States)

    Caro, D H

    1999-01-01

    Emergency and crisis management pose multidimensional information systems challenges for communities across North America. In the quest to reduce mortality and morbidity risks and to increase the level of crisis preparedness, regional emergency management networks have evolved. Integrated Crisis Support Systems (ICSS) are enabling information technologies that assist emergency managers by enhancing the ability to strategically manage and control these regional emergency networks efficiently and effectively. This article underscores the ICCS development, control and leadership issues and their promising implications for regional emergency management networks.

  20. Spectralon BRDF and DHR Measurements in Support of Satellite Instruments Operating Through Shortwave Infrared

    Science.gov (United States)

    Georgiev, Georgi T.; Butler, James J.; Thome, Kurt; Cooksey, Catherine; Ding, Leibo

    2016-01-01

    Satellite instruments operating in the reflective solar wavelength region require accurate and precise determination of the Bidirectional Reflectance Distribution Functions (BRDFs) of the laboratory and flight diffusers used in their pre-flight and on-orbit calibrations. This paper advances that initial work and presents a comparison of spectral Bidirectional Reflectance Distribution Function (BRDF) and Directional Hemispherical Reflectance (DHR) of Spectralon*, a common material for laboratory and onorbit flight diffusers. A new measurement setup for BRDF measurements from 900 nm to 2500 nm located at NASA Goddard Space Flight Center (GSFC) is described. The GSFC setup employs an extended indium gallium arsenide detector, bandpass filters, and a supercontinuum light source. Comparisons of the GSFC BRDF measurements in the ShortWave InfraRed (SWIR) with those made by the NIST Spectral Trifunction Automated Reference Reflectometer (STARR) are presented. The Spectralon sample used in this study was 2 inch diameter, 99% white pressed and sintered Polytetrafluoroethylene (PTFE) target. The NASA/NIST BRDF comparison measurements were made at an incident angle of 0 deg and viewing angle of 45 deg. Additional BRDF data not compared to NIST were measured at additional incident and viewing angle geometries and are not presented here The total combined uncertainty for the measurement of BRDF in the SWIR range made by the GSFC scatterometer is less than 1% (k=1). This study is in support of the calibration of the Joint Polar Satellite System (JPSS) Radiation Budget Instrument (RBI) and Visible Infrared Imaging Radiometer Suite (VIIRS) of and other current and future NASA remote sensing missions operating across the reflected solar wavelength region.

  1. Decision support for integrated water-energy planning.

    Energy Technology Data Exchange (ETDEWEB)

    Tidwell, Vincent Carroll; Malczynski, Leonard A.; Kobos, Peter Holmes; Castillo, Cesar; Hart, William Eugene; Klise, Geoffrey T.

    2009-10-01

    Currently, electrical power generation uses about 140 billion gallons of water per day accounting for over 39% of all freshwater withdrawals thus competing with irrigated agriculture as the leading user of water. Coupled to this water use is the required pumping, conveyance, treatment, storage and distribution of the water which requires on average 3% of all electric power generated. While water and energy use are tightly coupled, planning and management of these fundamental resources are rarely treated in an integrated fashion. Toward this need, a decision support framework has been developed that targets the shared needs of energy and water producers, resource managers, regulators, and decision makers at the federal, state and local levels. The framework integrates analysis and optimization capabilities to identify trade-offs, and 'best' alternatives among a broad list of energy/water options and objectives. The decision support framework is formulated in a modular architecture, facilitating tailored analyses over different geographical regions and scales (e.g., national, state, county, watershed, NERC region). An interactive interface allows direct control of the model and access to real-time results displayed as charts, graphs and maps. Ultimately, this open and interactive modeling framework provides a tool for evaluating competing policy and technical options relevant to the energy-water nexus.

  2. Integrated Decision Support for Global Environmental Change Adaptation

    Science.gov (United States)

    Kumar, S.; Cantrell, S.; Higgins, G. J.; Marshall, J.; VanWijngaarden, F.

    2011-12-01

    Environmental changes are happening now that has caused concern in many parts of the world; particularly vulnerable are the countries and communities with limited resources and with natural environments that are more susceptible to climate change impacts. Global leaders are concerned about the observed phenomena and events such as Amazon deforestation, shifting monsoon patterns affecting agriculture in the mountain slopes of Peru, floods in Pakistan, water shortages in Middle East, droughts impacting water supplies and wildlife migration in Africa, and sea level rise impacts on low lying coastal communities in Bangladesh. These environmental changes are likely to get exacerbated as the temperatures rise, the weather and climate patterns change, and sea level rise continues. Large populations and billions of dollars of infrastructure could be affected. At Northrop Grumman, we have developed an integrated decision support framework for providing necessary information to stakeholders and planners to adapt to the impacts of climate variability and change at the regional and local levels. This integrated approach takes into account assimilation and exploitation of large and disparate weather and climate data sets, regional downscaling (dynamic and statistical), uncertainty quantification and reduction, and a synthesis of scientific data with demographic and economic data to generate actionable information for the stakeholders and decision makers. Utilizing a flexible service oriented architecture and state-of-the-art visualization techniques, this information can be delivered via tailored GIS portals to meet diverse set of user needs and expectations. This integrated approach can be applied to regional and local risk assessments, predictions and decadal projections, and proactive adaptation planning for vulnerable communities. In this paper we will describe this comprehensive decision support approach with selected applications and case studies to illustrate how this

  3. A Support Database System for Integrated System Health Management (ISHM)

    Science.gov (United States)

    Schmalzel, John; Figueroa, Jorge F.; Turowski, Mark; Morris, John

    2007-01-01

    The development, deployment, operation and maintenance of Integrated Systems Health Management (ISHM) applications require the storage and processing of tremendous amounts of low-level data. This data must be shared in a secure and cost-effective manner between developers, and processed within several heterogeneous architectures. Modern database technology allows this data to be organized efficiently, while ensuring the integrity and security of the data. The extensibility and interoperability of the current database technologies also allows for the creation of an associated support database system. A support database system provides additional capabilities by building applications on top of the database structure. These applications can then be used to support the various technologies in an ISHM architecture. This presentation and paper propose a detailed structure and application description for a support database system, called the Health Assessment Database System (HADS). The HADS provides a shared context for organizing and distributing data as well as a definition of the applications that provide the required data-driven support to ISHM. This approach provides another powerful tool for ISHM developers, while also enabling novel functionality. This functionality includes: automated firmware updating and deployment, algorithm development assistance and electronic datasheet generation. The architecture for the HADS has been developed as part of the ISHM toolset at Stennis Space Center for rocket engine testing. A detailed implementation has begun for the Methane Thruster Testbed Project (MTTP) in order to assist in developing health assessment and anomaly detection algorithms for ISHM. The structure of this implementation is shown in Figure 1. The database structure consists of three primary components: the system hierarchy model, the historical data archive and the firmware codebase. The system hierarchy model replicates the physical relationships between

  4. A Cost Model for Integrated Logistic Support Activities

    Directory of Open Access Journals (Sweden)

    M. Elena Nenni

    2013-01-01

    Full Text Available An Integrated Logistic Support (ILS service has the objective of improving a system’s efficiency and availability for the life cycle. The system constructor offers the service to the customer, and she becomes the Contractor Logistic Support (CLS. The aim of this paper is to propose an approach to support the CLS in the budget formulation. Specific goals of the model are the provision of the annual cost of ILS activities through a specific cost model and a comprehensive examination of expected benefits, costs and savings under alternative ILS strategies. A simple example derived from an industrial application is also provided to illustrate the idea. Scientific literature is lacking in the topic and documents from the military are just dealing with the issue of performance measurement. Moreover, they are obviously focused on the customer’s perspective. Other scientific papers are general and focused only on maintenance or life cycle management. The model developed in this paper approaches the problem from the perspective of the CLS, and it is specifically tailored on the main issues of an ILS service.

  5. Tavaxy: integrating Taverna and Galaxy workflows with cloud computing support.

    Science.gov (United States)

    Abouelhoda, Mohamed; Issa, Shadi Alaa; Ghanem, Moustafa

    2012-05-04

    Over the past decade the workflow system paradigm has evolved as an efficient and user-friendly approach for developing complex bioinformatics applications. Two popular workflow systems that have gained acceptance by the bioinformatics community are Taverna and Galaxy. Each system has a large user-base and supports an ever-growing repository of application workflows. However, workflows developed for one system cannot be imported and executed easily on the other. The lack of interoperability is due to differences in the models of computation, workflow languages, and architectures of both systems. This lack of interoperability limits sharing of workflows between the user communities and leads to duplication of development efforts. In this paper, we present Tavaxy, a stand-alone system for creating and executing workflows based on using an extensible set of re-usable workflow patterns. Tavaxy offers a set of new features that simplify and enhance the development of sequence analysis applications: It allows the integration of existing Taverna and Galaxy workflows in a single environment, and supports the use of cloud computing capabilities. The integration of existing Taverna and Galaxy workflows is supported seamlessly at both run-time and design-time levels, based on the concepts of hierarchical workflows and workflow patterns. The use of cloud computing in Tavaxy is flexible, where the users can either instantiate the whole system on the cloud, or delegate the execution of certain sub-workflows to the cloud infrastructure. Tavaxy reduces the workflow development cycle by introducing the use of workflow patterns to simplify workflow creation. It enables the re-use and integration of existing (sub-) workflows from Taverna and Galaxy, and allows the creation of hybrid workflows. Its additional features exploit recent advances in high performance cloud computing to cope with the increasing data size and complexity of analysis.The system can be accessed either through a

  6. Tavaxy: Integrating Taverna and Galaxy workflows with cloud computing support

    Directory of Open Access Journals (Sweden)

    Abouelhoda Mohamed

    2012-05-01

    Full Text Available Abstract Background Over the past decade the workflow system paradigm has evolved as an efficient and user-friendly approach for developing complex bioinformatics applications. Two popular workflow systems that have gained acceptance by the bioinformatics community are Taverna and Galaxy. Each system has a large user-base and supports an ever-growing repository of application workflows. However, workflows developed for one system cannot be imported and executed easily on the other. The lack of interoperability is due to differences in the models of computation, workflow languages, and architectures of both systems. This lack of interoperability limits sharing of workflows between the user communities and leads to duplication of development efforts. Results In this paper, we present Tavaxy, a stand-alone system for creating and executing workflows based on using an extensible set of re-usable workflow patterns. Tavaxy offers a set of new features that simplify and enhance the development of sequence analysis applications: It allows the integration of existing Taverna and Galaxy workflows in a single environment, and supports the use of cloud computing capabilities. The integration of existing Taverna and Galaxy workflows is supported seamlessly at both run-time and design-time levels, based on the concepts of hierarchical workflows and workflow patterns. The use of cloud computing in Tavaxy is flexible, where the users can either instantiate the whole system on the cloud, or delegate the execution of certain sub-workflows to the cloud infrastructure. Conclusions Tavaxy reduces the workflow development cycle by introducing the use of workflow patterns to simplify workflow creation. It enables the re-use and integration of existing (sub- workflows from Taverna and Galaxy, and allows the creation of hybrid workflows. Its additional features exploit recent advances in high performance cloud computing to cope with the increasing data size and

  7. Tavaxy: Integrating Taverna and Galaxy workflows with cloud computing support

    Science.gov (United States)

    2012-01-01

    Background Over the past decade the workflow system paradigm has evolved as an efficient and user-friendly approach for developing complex bioinformatics applications. Two popular workflow systems that have gained acceptance by the bioinformatics community are Taverna and Galaxy. Each system has a large user-base and supports an ever-growing repository of application workflows. However, workflows developed for one system cannot be imported and executed easily on the other. The lack of interoperability is due to differences in the models of computation, workflow languages, and architectures of both systems. This lack of interoperability limits sharing of workflows between the user communities and leads to duplication of development efforts. Results In this paper, we present Tavaxy, a stand-alone system for creating and executing workflows based on using an extensible set of re-usable workflow patterns. Tavaxy offers a set of new features that simplify and enhance the development of sequence analysis applications: It allows the integration of existing Taverna and Galaxy workflows in a single environment, and supports the use of cloud computing capabilities. The integration of existing Taverna and Galaxy workflows is supported seamlessly at both run-time and design-time levels, based on the concepts of hierarchical workflows and workflow patterns. The use of cloud computing in Tavaxy is flexible, where the users can either instantiate the whole system on the cloud, or delegate the execution of certain sub-workflows to the cloud infrastructure. Conclusions Tavaxy reduces the workflow development cycle by introducing the use of workflow patterns to simplify workflow creation. It enables the re-use and integration of existing (sub-) workflows from Taverna and Galaxy, and allows the creation of hybrid workflows. Its additional features exploit recent advances in high performance cloud computing to cope with the increasing data size and complexity of analysis. The system

  8. Principal components based support vector regression model for on-line instrument calibration monitoring in NPPs

    International Nuclear Information System (INIS)

    Seo, In Yong; Ha, Bok Nam; Lee, Sung Woo; Shin, Chang Hoon; Kim, Seong Jun

    2010-01-01

    In nuclear power plants (NPPs), periodic sensor calibrations are required to assure that sensors are operating correctly. By checking the sensor's operating status at every fuel outage, faulty sensors may remain undetected for periods of up to 24 months. Moreover, typically, only a few faulty sensors are found to be calibrated. For the safe operation of NPP and the reduction of unnecessary calibration, on-line instrument calibration monitoring is needed. In this study, principal component based auto-associative support vector regression (PCSVR) using response surface methodology (RSM) is proposed for the sensor signal validation of NPPs. This paper describes the design of a PCSVR-based sensor validation system for a power generation system. RSM is employed to determine the optimal values of SVR hyperparameters and is compared to the genetic algorithm (GA). The proposed PCSVR model is confirmed with the actual plant data of Kori Nuclear Power Plant Unit 3 and is compared with the Auto-Associative support vector regression (AASVR) and the auto-associative neural network (AANN) model. The auto-sensitivity of AASVR is improved by around six times by using a PCA, resulting in good detection of sensor drift. Compared to AANN, accuracy and cross-sensitivity are better while the auto-sensitivity is almost the same. Meanwhile, the proposed RSM for the optimization of the PCSVR algorithm performs even better in terms of accuracy, auto-sensitivity, and averaged maximum error, except in averaged RMS error, and this method is much more time efficient compared to the conventional GA method

  9. Vertebral Osteomyelitis Caused by Mycobacterium abscessus Surgically Treated Using Antibacterial Iodine-Supported Instrumentation

    Directory of Open Access Journals (Sweden)

    Satoshi Kato

    2014-01-01

    Full Text Available Mycobacterium abscessus infections rarely develop in healthy individuals, and mostly they occur in immunocompromised hosts. Vertebral osteomyelitis due to Mycobacterium abscessus is very rare and only three previous cases of spinal infection caused by Mycobacterium abscessus have been reported. Mycobacterium abscessus isolates are uniformly resistant to antituberculous agents and can display a virulent biofilm-forming phenotype. The patient was a 67-year-old woman with vertebral osteomyelitis of the L1-2. She was healthy without immune-suppressed condition, history of trauma, or intravenous drug use. The smear examination of the specimen harvested by CT-guided puncture of the paravertebral abscess revealed Mycobacterium abscessus. Her disease condition did not abate with conservative treatment using antimicrobial chemotherapy. Radical debridement of the vertebral osteomyelitis and anterior reconstruction from T12 to L2 using antibacterial iodine-supported instrumentation were performed. Chemotherapy using clarithromycin, amikacin, and imipenem was applied for 6 months after surgery as these antibiotics had been proven to be effective to Mycobacterium abscessus after surgery. Two years after surgery, the infected anterior site healed and bony fusion was successfully achieved without a recurrence of infection.

  10. The role of integrated logistic support in performance assessment of nuclear facilities

    International Nuclear Information System (INIS)

    Prager, G.; Munro, J.F.

    1988-01-01

    Integrated logistic support (ILS) is a process used extensively by the Department of Defense as the major tool for weapons systems readiness and support-ability. ILS provides a proven scientific and engineering method for defining system support requirements while acquiring necessary support. ILS is also the management process for planning, programming and integrating support-ability considerations into the acquisition and operations process. Concurrent with the acquisition of material support requirements are identified, planned, evaluated, acquired and installed

  11. An Integrated Information Retrieval Support System for Campus Network

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    This paper presents a new integrated information retrieval support system (IIRSS) which can help Web search engines retrieve cross-lingual information from heterogeneous resources stored in multi-databases in Intranet. The IIRSS, with a three-layer architecture, can cooperate with other application servers running in Intranet. By using intelligent agents to collect information and to create indexes on-the-fly, using an access control strategy to confine a user to browsing those accessible documents for him/her through a single portal, and using a new cross-lingual translation tool to help the search engine retrieve documents, the new system provides controllable information access with different authorizations, personalized services, and real-time information retrieval.

  12. Royal Military College of Canada SLOWPOKE-2 facility. Integrated regulating and instrumentation system (SIRCIS) upgrade project

    International Nuclear Information System (INIS)

    Corcoran, W.P.; Nielsen, K.S.; Kelly, D.G.; Weir, R.D.

    2013-01-01

    The SLOWPOKE-2 Facility at the Royal Military College of Canada has operated the only digitally controlled SLOWPOKE reactor since 2001 (Version 1.0). The present work describes ongoing project development to provide a robust digital reactor control system that is consistent with Aging Management as summarized in the Facility's Life Cycle Management and Maintenance Plan. The project has transitioned from a post-graduate research activity to a comprehensively managed project supported by a team of RMCC professional and technical staff who have delivered an update of the V1.1 system software and hardware implementation that is consistent with best Canadian nuclear industry practice. The challenges associated with the implementation of Version 2.0 in February 2012, the lessons learned from this implementation, and the applications of these lessons to a redesign and rewrite of the RMCC SLOWPOKE-2 digital instrumentation and regulating system (Version 3) are discussed. (author)

  13. VIRUS instrument enclosures

    Science.gov (United States)

    Prochaska, T.; Allen, R.; Mondrik, N.; Rheault, J. P.; Sauseda, M.; Boster, E.; James, M.; Rodriguez-Patino, M.; Torres, G.; Ham, J.; Cook, E.; Baker, D.; DePoy, Darren L.; Marshall, Jennifer L.; Hill, G. J.; Perry, D.; Savage, R. D.; Good, J. M.; Vattiat, Brian L.

    2014-08-01

    The Visible Integral-Field Replicable Unit Spectrograph (VIRUS) instrument will be installed at the Hobby-Eberly Telescope† in the near future. The instrument will be housed in two enclosures that are mounted adjacent to the telescope, via the VIRUS Support Structure (VSS). We have designed the enclosures to support and protect the instrument, to enable servicing of the instrument, and to cool the instrument appropriately while not adversely affecting the dome environment. The system uses simple HVAC air handling techniques in conjunction with thermoelectric and standard glycol heat exchangers to provide efficient heat removal. The enclosures also provide power and data transfer to and from each VIRUS unit, liquid nitrogen cooling to the detectors, and environmental monitoring of the instrument and dome environments. In this paper, we describe the design and fabrication of the VIRUS enclosures and their subsystems.

  14. Validity-Supporting Evidence of the Self-Efficacy for Teaching Mathematics Instrument

    Science.gov (United States)

    McGee, Jennifer R.; Wang, Chuang

    2014-01-01

    The purpose of this study is to provide evidence of reliability and validity of the Self-Efficacy for Teaching Mathematics Instrument (SETMI). Self-efficacy, as defined by Bandura, was the theoretical framework for the development of the instrument. The complex belief systems of mathematics teachers, as touted by Ernest provided insights into the…

  15. Development, content validity, and piloting of an instrument designed to measure managers' attitude toward workplace breastfeeding support.

    Science.gov (United States)

    Chow, Tan; Wolfe, Edward W; Olson, Beth H

    2012-07-01

    Manager attitude is influential in female employees' perceptions of workplace breastfeeding support. Currently, no instrument is available to assess manager attitude toward supporting women who wish to combine breastfeeding with work. We developed and piloted an instrument to measure manager attitudes toward workplace breastfeeding support entitled the "Managers' Attitude Toward Breastfeeding Support Questionnaire," an instrument that measures four constructs using 60 items that are rated agree/disagree on a 4-point Likert rating scale. We established the content validity of the Managers' Attitude Toward Breastfeeding Support Questionnaire measures through expert content review (n=22), expert assessment of item fit (n=11), and cognitive interviews (n=8). Data were collected from a purposive sample of 185 front-line managers who had experience supervising female employees, and responses were scaled using the Multidimensional Random Coefficients Multinomial Logit Model. Dimensionality analyses supported the proposed four-construct model. Reliability ranged from 0.75 to 0.86, and correlations between the constructs were moderately strong (0.47 to 0.71). Four items in two constructs exhibited model-to-data misfit and/or a low score-measure correlation. One item was revised and the other three items were retained in the Managers' Attitude Toward Breastfeeding Support Questionnaire. Findings of this study suggest that the Managers' Attitude Toward Breastfeeding Support Questionnaire measures are reliable and valid indicators of manager attitude toward workplace breastfeeding support, and future research should be conducted to establish external validity. The Managers' Attitude Toward Breastfeeding Support Questionnaire could be used to collect data in a standardized manner within and across companies to measure and compare manager attitudes toward supporting breastfeeding. Organizations can subsequently develop targeted strategies to improve support for breastfeeding

  16. Increasing the effectiveness of instrumentation and control training programs using integrated training settings and a systematic approach to training

    International Nuclear Information System (INIS)

    McMahon, J.F.; Rakos, N.

    1992-01-01

    The performance of plant maintenance-related tasks assigned to instrumentation and control (I ampersand C) technicians can be broken down into physical skills required to do the task; resident knowledge of how to do the task; effect of maintenance on plant operating conditions; interactions with other plant organizations such as operations, radiation protection, and quality control; and knowledge of consequences of miss-action. A technician who has learned about the task in formal classroom presentations has not had the advantage of integrating that knowledge with the requisite physical and communication skills; hence, the first time these distinct and vital parts of the task equation are put together is on the job, during initial task performance. On-the-job training provides for the integration of skills and knowledge; however, this form of training is limited by plant conditions, availability of supporting players, and training experience levels of the personnel conducting the exercise. For licensed operations personnel, most nuclear utilities use formal classroom and a full-scope control room simulator to achieve the integration of skills and knowledge in a controlled training environment. TU Electric has taken that same approach into maintenance areas by including identical plant equipment in a laboratory setting for the large portion of training received by maintenance personnel at its Comanche Peak steam electric station. The policy of determining training needs and defining the scope of training by using the systematic approach to training has been highly effective and provided training at a reasonable cost (approximately $18.00/student contact hour)

  17. RODOS: a comprehensive European - integrated decision support system for Romania

    International Nuclear Information System (INIS)

    Mateescu, Gh.; Gheorghiu, Adriana; Gheorghiu, Dorina; Slavnicu, Dan; Craciunescu, Teddy

    1998-01-01

    This work is basically dedicated to RODOS (Real-time On-line DecisiOn support System), a comprehensive (computerized) decision support system ((C)DSS), integrated at European scale, which is in progress to be customized and implemented also for Romania to cope with the off-site response to nuclear emergencies. The first part deals with a short introduction regarding the need for a decision support system especially in case of a nuclear accident; there are also briefly reviewed the criteria one could demand that a CDSS should fulfill and the need for CDSS to give unequivocal answers to all encountered matters. Subsequently, there are mentioned some of the most known DSS in the world for off-site response to nuclear emergencies together with certain recent accomplishment of the IAEA in this field. The next chapter is dedicated to the four basic related projects (ECURIE, EURDEP, OSEP and RODOS) of the European Commission whose purpose consists in the optimisation of the nuclear emergency preparedness and response everywhere in Europe. Further on there are presented the basic features (the overall structure and functions), along with component software subsystems of the RODOS and, then, the background of RODOS implementation in Romania is reviewed (Romanian reasons to adhere to the RODOS project, needs, national legal framework and competent authorities in the nuclear domain, national radiological and meteorological networks. Finally, it is shortly reported the present status of RODOS customization and implementation in Romania (RODOS dedicated technical environment, collection of data and their transfer into RoGIS database, real-time on-line connection to networks, collection of data for countermeasure modules, source term assessment for CANDU-reactor, other related achievements) together with some concluding remarks. (authors)

  18. Layout of PWR in-core instrumentation system tubing and support structure with Bechtel 3D-CADD

    International Nuclear Information System (INIS)

    Ichikawa, T.; Pfeifer, B.W.; Mulay, J.N.

    1987-01-01

    The optimization study of the PWR In-Core Instrumentation System (ICIS) tubing layout and support structure presented an opportunity to utilize the Bechtel 3D-CADD program to perform this task. This paper provides a brief summary of the Bechtel 3D-CADD program development and capabilities and outlines the process of developing and optimizing the ICIS tube layout. Specific aspects relating to the ICIS tube layout criteria, support, alignment, electronic interference check and erection sequence are provided. (orig.)

  19. The development and psychometric validation of the self-efficacy and performance in self-management support (SEPSS) Instrument

    NARCIS (Netherlands)

    V. Duprez (Veerle); S.M. van Hooft (Susanne); J. Dwarswaard (Jolanda); A.L. van Staa (AnneLoes); A. Van Hecke (Ann); M.M.H. Strating (Mathilde)

    2016-01-01

    markdownabstract__Aim:__ To develop and psychometrically test the self-efficacy and performance in self-management support (SEPSS) instrument. __Background:__ Facilitating persons with a chronic condition to take an active role in the management of their condition, implicates that nurses acquire

  20. The development and psychometric validation of the self-efficacy and performance in self-management support (SEPSS) Instrument

    NARCIS (Netherlands)

    Dr. J. Dwarswaard; A. van Hecke; Dr. S.M. van Hooft; M.M.H. Strating; Dr. A.L. van Staa; V. Duprez

    2015-01-01

    Facilitating persons with a chronic condition to take an active role in the management of their condition, implicates that nurses acquire new competencies. An instrument that can validly and reliably measure nurses’ performance and their perceived capacity to perform self-management support

  1. An Integrated Information System for Supporting Quality Management Tasks

    Science.gov (United States)

    Beyer, N.; Helmreich, W.

    2004-08-01

    In a competitive environment, well defined processes become the strategic advantage of a company. Hence, targeted Quality Management ensures efficiency, trans- parency and, ultimately, customer satisfaction. In the particular context of a Space Test Centre, a num- ber of specific Quality Management standards have to be applied. According to the revision of ISO 9001 dur- ing 2000, and due to the adaptation of ECSS-Q20-07, process orientation and data analysis are key tasks for ensuring and evaluating the efficiency of a company's processes. In line with these requirements, an integrated management system for accessing the necessary infor- mation to support Quality Management and other proc- esses has been established. Some of its test-related fea- tures are presented here. Easy access to the integrated management system from any work place at IABG's Space Test Centre is ensured by means of an intranet portal. It comprises a full set of quality-related process descriptions, information on test facilities, emergency procedures, and other relevant in- formation. The portal's web interface provides direct access to a couple of external applications. Moreover, easy updating of all information and low cost mainte- nance are features of this integrated information system. The timely and transparent management of non- conformances is covered by a dedicated NCR database which incorporates full documentation capability, elec- tronic signature and e-mail notification of concerned staff. A search interface allows for queries across all documented non-conformances. Furthermore, print ver- sions can be generated at any stage in the process, e.g. for distribution to customers. Feedback on customer satisfaction is sought through a web-based questionnaire. The process is initiated by the responsible test manager through submission of an e- mail that contains a hyperlink to a secure website, ask- ing the customer to complete the brief online form, which is directly fed to a database

  2. 26 CFR 1.1275-6 - Integration of qualifying debt instruments.

    Science.gov (United States)

    2010-04-01

    ... § 1.483-4 or § 1.1275-4(c) (certain contingent payment debt instruments issued for nonpublicly traded... the qualifying debt instrument. A financial instrument that hedges currency risk is not a § 1.1275-6... denominated in pounds, the swap hedges only interest rate risk, not currency risk. Therefore, the transaction...

  3. Social Integration and Domestic Violence Support in an Indigenous Community: Women's Recommendations of Formal Versus Informal Sources of Support.

    Science.gov (United States)

    Gauthier, G Robin; Francisco, Sara C; Khan, Bilal; Dombrowski, Kirk

    2018-05-01

    Throughout North America, indigenous women experience higher rates of intimate partner violence and sexual violence than any other ethnic group, and so it is of particular importance to understand sources of support for Native American women. In this article, we use social network analysis to study the relationship between social integration and women's access to domestic violence support by examining the recommendations they would give to another woman in need. We ask two main questions: First, are less integrated women more likely to make no recommendation at all when compared with more socially integrated women? Second, are less integrated women more likely than more integrated women to nominate a formal source of support rather than an informal one? We use network data collected from interviews with 158 Canadian women residing in an indigenous community to measure their access to support. We find that, in general, less integrated women are less likely to make a recommendation than more integrated women. However, when they do make a recommendation, less integrated women are more likely to recommend a formal source of support than women who are more integrated. These results add to our understanding of how access to two types of domestic violence support is embedded in the larger set of social relations of an indigenous community.

  4. Integration of Sensors, Controllers and Instruments Using a Novel OPC Architecture.

    Science.gov (United States)

    González, Isaías; Calderón, Antonio José; Barragán, Antonio Javier; Andújar, José Manuel

    2017-06-27

    The interconnection between sensors, controllers and instruments through a communication network plays a vital role in the performance and effectiveness of a control system. Since its inception in the 90s, the Object Linking and Embedding for Process Control (OPC) protocol has provided open connectivity for monitoring and automation systems. It has been widely used in several environments such as industrial facilities, building and energy automation, engineering education and many others. This paper presents a novel OPC-based architecture to implement automation systems devoted to R&D and educational activities. The proposal is a novel conceptual framework, structured into four functional layers where the diverse components are categorized aiming to foster the systematic design and implementation of automation systems involving OPC communication. Due to the benefits of OPC, the proposed architecture provides features like open connectivity, reliability, scalability, and flexibility. Furthermore, four successful experimental applications of such an architecture, developed at the University of Extremadura (UEX), are reported. These cases are a proof of concept of the ability of this architecture to support interoperability for different domains. Namely, the automation of energy systems like a smart microgrid and photobioreactor facilities, the implementation of a network-accessible industrial laboratory and the development of an educational hardware-in-the-loop platform are described. All cases include a Programmable Logic Controller (PLC) to automate and control the plant behavior, which exchanges operative data (measurements and signals) with a multiplicity of sensors, instruments and supervisory systems under the structure of the novel OPC architecture. Finally, the main conclusions and open research directions are highlighted.

  5. Integrated Instrumentation and Sensor Systems Enabling Condition-Based Maintenance of Aerospace Equipment

    Directory of Open Access Journals (Sweden)

    Richard C. Millar

    2012-01-01

    Full Text Available The objective of the work reported herein was to use a systems engineering approach to guide development of integrated instrumentation/sensor systems (IISS incorporating communications, interconnections, and signal acquisition. These require enhanced suitability and effectiveness for diagnostics and health management of aerospace equipment governed by the principles of Condition-based maintenance (CBM. It is concluded that the systems engineering approach to IISS definition provided clear benefits in identifying overall system requirements and an architectural framework for categorizing and evaluating alternative architectures, relative to a bottom up focus on sensor technology blind to system level user needs. CBM IISS imperatives identified include factors such as tolerance of the bulk of aerospace equipment operational environments, low intrusiveness, rapid reconfiguration, and affordable life cycle costs. The functional features identified include interrogation of the variety of sensor types and interfaces common in aerospace equipment applications over multiplexed communication media with flexibility to allow rapid system reconfiguration to adapt to evolving sensor needs. This implies standardized interfaces at the sensor location (preferably to open standards, reduced wire/connector pin count in harnesses (or their elimination through use of wireless communications.

  6. Narrative persuasion, causality, complex integration, and support for obesity policy.

    Science.gov (United States)

    Niederdeppe, Jeff; Shapiro, Michael A; Kim, Hye Kyung; Bartolo, Danielle; Porticella, Norman

    2014-01-01

    Narrative messages have the potential to convey causal attribution information about complex social issues. This study examined attributions about obesity, an issue characterized by interrelated biological, behavioral, and environmental causes. Participants were randomly assigned to read one of three narratives emphasizing societal causes and solutions for obesity or an unrelated story that served as the control condition. The three narratives varied in the extent to which the character in the story acknowledged personal responsibility (high, moderate, and none) for controlling her weight. Stories that featured no acknowledgment and moderate acknowledgment of personal responsibility, while emphasizing environmental causes and solutions, were successful at increasing societal cause attributions about obesity and, among conservatives, increasing support for obesity-related policies relative to the control group. The extent to which respondents were able to make connections between individual and environmental causes of obesity (complex integration) mediated the relationship between the moderate acknowledgment condition and societal cause attributions. We conclude with a discussion of the implications of this work for narrative persuasion theory and health communication campaigns.

  7. Integrated environmental decision support tool based on GIS technology

    International Nuclear Information System (INIS)

    Doctor, P.G.; O'Neil, T.K.; Sackschewsky, M.R.; Becker, J.M.; Rykiel, E.J.; Walters, T.B.; Brandt, C.A.; Hall, J.A.

    1995-01-01

    Environmental restoration and management decisions facing the US Department of Energy require balancing trade-offs between diverse land uses and impacts over multiple spatial and temporal scales. Many types of environmental data have been collected for the Hanford Site and the Columbia River in Washington State over the past fifty years. Pacific Northwest National Laboratory (PNNL) is integrating these data into a Geographic Information System (GIS) based computer decision support tool. This tool provides a comprehensive and concise description of the current environmental landscape that can be used to evaluate the ecological and monetary trade-offs between future land use, restoration and remediation options before action is taken. Ecological impacts evaluated include effects to individual species of concern and habitat loss and fragmentation. Monetary impacts include those associated with habitat mitigation. The tool is organized as both a browsing tool for educational purposes, and as a framework that leads a project manager through the steps needed to be in compliance with environmental requirements

  8. Assessing the validity of measures of an instrument designed to measure employees' perceptions of workplace breastfeeding support.

    Science.gov (United States)

    Greene, Sally W; Wolfe, Edward W; Olson, Beth H

    2008-09-01

    Breastfeeding rates among working mothers are lower than among mothers who are not employed. An ecological framework suggests that health behaviors, such as breastfeeding, are influenced by intrapersonal and environmental factors. There is no existing instrument to measure women's perception of the workplace environment in providing breastfeeding support. The objective of this study was to pilot an instrument measuring perceptions of the work climate for breastfeeding support among working women. Data were collected from self-administered mailed questionnaires filled out by 104 pregnant women or women who had recently given birth and were employed and breastfeeding. Dimensionally analyses supported the two-dimensional model suggested by the literature. Internal consistency reliability coefficients were high (near 0.90), and the correlation between the subscales was moderately strong (0.68). Only a single item exhibited misfit to the scaling model, and that item was revised after review.

  9. Outcomes of moral case deliberation--the development of an evaluation instrument for clinical ethics support (the Euro-MCD).

    Science.gov (United States)

    Svantesson, Mia; Karlsson, Jan; Boitte, Pierre; Schildman, Jan; Dauwerse, Linda; Widdershoven, Guy; Pedersen, Reidar; Huisman, Martijn; Molewijk, Bert

    2014-04-08

    Clinical ethics support, in particular Moral Case Deliberation, aims to support health care providers to manage ethically difficult situations. However, there is a lack of evaluation instruments regarding outcomes of clinical ethics support in general and regarding Moral Case Deliberation (MCD) in particular. There also is a lack of clarity and consensuses regarding which MCD outcomes are beneficial. In addition, MCD outcomes might be context-sensitive. Against this background, there is a need for a standardised but flexible outcome evaluation instrument. The aim of this study was to develop a multi-contextual evaluation instrument measuring health care providers' experiences and perceived importance of outcomes of Moral Case Deliberation. A multi-item instrument for assessing outcomes of Moral Case Deliberation (MCD) was constructed through an iterative process, founded on a literature review and modified through a multistep review by ethicists and health care providers. The instrument measures perceived importance of outcomes before and after MCD, as well as experienced outcomes during MCD and in daily work. A purposeful sample of 86 European participants contributed to a Delphi panel and content validity testing. The Delphi panel (n = 13), consisting of ethicists and ethics researchers, participated in three Delphi-rounds. Health care providers (n = 73) participated in the content validity testing through 'think-aloud' interviews and a method using Content Validity Index. The development process resulted in the European Moral Case Deliberation Outcomes Instrument (Euro-MCD), which consists of two sections, one to be completed before a participant's first MCD and the other after completing multiple MCDs. The instrument contains a few open-ended questions and 26 specific items with a corresponding rating/response scale representing various MCD outcomes. The items were categorised into the following six domains: Enhanced emotional support, Enhanced

  10. Outcomes of Moral Case Deliberation - the development of an evaluation instrument for clinical ethics support (the Euro-MCD)

    Science.gov (United States)

    2014-01-01

    Background Clinical ethics support, in particular Moral Case Deliberation, aims to support health care providers to manage ethically difficult situations. However, there is a lack of evaluation instruments regarding outcomes of clinical ethics support in general and regarding Moral Case Deliberation (MCD) in particular. There also is a lack of clarity and consensuses regarding which MCD outcomes are beneficial. In addition, MCD outcomes might be context-sensitive. Against this background, there is a need for a standardised but flexible outcome evaluation instrument. The aim of this study was to develop a multi-contextual evaluation instrument measuring health care providers’ experiences and perceived importance of outcomes of Moral Case Deliberation. Methods A multi-item instrument for assessing outcomes of Moral Case Deliberation (MCD) was constructed through an iterative process, founded on a literature review and modified through a multistep review by ethicists and health care providers. The instrument measures perceived importance of outcomes before and after MCD, as well as experienced outcomes during MCD and in daily work. A purposeful sample of 86 European participants contributed to a Delphi panel and content validity testing. The Delphi panel (n = 13), consisting of ethicists and ethics researchers, participated in three Delphi-rounds. Health care providers (n = 73) participated in the content validity testing through ‘think-aloud’ interviews and a method using Content Validity Index. Results The development process resulted in the European Moral Case Deliberation Outcomes Instrument (Euro-MCD), which consists of two sections, one to be completed before a participant’s first MCD and the other after completing multiple MCDs. The instrument contains a few open-ended questions and 26 specific items with a corresponding rating/response scale representing various MCD outcomes. The items were categorised into the following six domains: Enhanced

  11. Wide-range bipolar pulse conductance instrument employing current and voltage modes with sampled or integrated signal acquisition

    Energy Technology Data Exchange (ETDEWEB)

    Calhoun, R K; Holler, F J [Kentucky Univ., Lexington, KY (United States). Dept. of Chemistry; Geiger, jr, R F; Nieman, T A [Illinois Univ., Urbana, IL (United States). Dept. of Chemistry; Caserta, K J [Procter and Gamble Co., Cincinnati, OH (United States)

    1991-11-05

    An instrument for measuring solution conductance using the bipolar pulse technique is described. The instrument is capable of measuring conductances in the range of 5x10{sup -9}-10{Omega}{sup -1} with 1% accuracy or better in as little as 32 {mu}s. Accuracy of 0.001-0.01% is achievable over the range 1x10{sup -6}-1{Omega}{sup -1}. Circuitry and software are described that allow the instrument to adjust automatically the pulse height, pulse duration, excitation mode (current or voltage pulse) and data acquisition mode (sampled or integrated) to acquire data of optimum accuracy and precision. The urease-catalyzed decomposition of urea is used to illustrate the versality of the instrument, and other applications are cited. (author). 60 refs.; 7 figs.; 2 tabs.

  12. Analysing the interactions between renewable energy promotion and energy efficiency support schemes: The impact of different instruments and design elements

    International Nuclear Information System (INIS)

    Rio, Pablo del

    2010-01-01

    CO 2 emissions reduction, renewable energy deployment and energy efficiency are three main energy/environmental goals, particularly in Europe. Their relevance has led to the implementation of support schemes in these realms. Their coexistence may lead to overlaps, synergies and conflicts between them. The aim of this paper is to analyse the interactions between energy efficiency measures and renewable energy promotion, whereas previous analyses have focused on the interactions between emissions trading schemes (ETS) and energy efficiency measures and ETS and renewable energy promotion schemes. Furthermore, the analysis in this paper transcends the 'certificate' debate (i.e., tradable green and white certificates) and considers other instruments, particularly feed-in tariffs for renewable electricity. The goal is to identify positive and negative interactions between energy efficiency and renewable electricity promotion and to assess whether the choice of specific instruments and design elements within those instruments affects the results of the interactions.

  13. Analysing the interactions between renewable energy promotion and energy efficiency support schemes: The impact of different instruments and design elements

    Energy Technology Data Exchange (ETDEWEB)

    Rio, Pablo del, E-mail: pablo.delrio@cchs.csic.e [Instituto de Politicas y Bienes Publicos, Consejo Superior de Investigaciones Cientificas (CSIC), C/Albasanz 26-28, 28037 Madrid (Spain)

    2010-09-15

    CO{sub 2} emissions reduction, renewable energy deployment and energy efficiency are three main energy/environmental goals, particularly in Europe. Their relevance has led to the implementation of support schemes in these realms. Their coexistence may lead to overlaps, synergies and conflicts between them. The aim of this paper is to analyse the interactions between energy efficiency measures and renewable energy promotion, whereas previous analyses have focused on the interactions between emissions trading schemes (ETS) and energy efficiency measures and ETS and renewable energy promotion schemes. Furthermore, the analysis in this paper transcends the 'certificate' debate (i.e., tradable green and white certificates) and considers other instruments, particularly feed-in tariffs for renewable electricity. The goal is to identify positive and negative interactions between energy efficiency and renewable electricity promotion and to assess whether the choice of specific instruments and design elements within those instruments affects the results of the interactions.

  14. Analysing the interactions between renewable energy promotion and energy efficiency support schemes. The impact of different instruments and design elements

    Energy Technology Data Exchange (ETDEWEB)

    Del Rio, Pablo [Instituto de Politicas y Bienes Publicos, Consejo Superior de Investigaciones Cientificas (CSIC), C/Albasanz 26-28, 28037 Madrid (Spain)

    2010-09-15

    CO{sub 2} emissions reduction, renewable energy deployment and energy efficiency are three main energy/environmental goals, particularly in Europe. Their relevance has led to the implementation of support schemes in these realms. Their coexistence may lead to overlaps, synergies and conflicts between them. The aim of this paper is to analyse the interactions between energy efficiency measures and renewable energy promotion, whereas previous analyses have focused on the interactions between emissions trading schemes (ETS) and energy efficiency measures and ETS and renewable energy promotion schemes. Furthermore, the analysis in this paper transcends the certificate debate (i.e., tradable green and white certificates) and considers other instruments, particularly feed-in tariffs for renewable electricity. The goal is to identify positive and negative interactions between energy efficiency and renewable electricity promotion and to assess whether the choice of specific instruments and design elements within those instruments affects the results of the interactions. (author)

  15. Development and validation of a trustworthy multisource feedback instrument to support nurse appraisals.

    Science.gov (United States)

    Crossley, James G M

    2015-01-01

    Nurse appraisal is well established in the Western world because of its obvious educational advantages. Appraisal works best with many sources of information on performance. Multisource feedback (MSF) is widely used in business and in other clinical disciplines to provide such information. It has also been incorporated into nursing appraisals, but, so far, none of the instruments in use for nurses has been validated. We set out to develop an instrument aligned with the UK Knowledge and Skills Framework (KSF) and to evaluate its reliability and feasibility across a wide hospital-based nursing population. The KSF framework provided a content template. Focus groups developed an instrument based on consensus. The instrument was administered to all the nursing staff in 2 large NHS hospitals forming a single trust in London, England. We used generalizability analysis to estimate reliability, response rates and unstructured interviews to evaluate feasibility, and factor structure and correlation studies to evaluate validity. On a voluntary basis the response rate was moderate (60%). A failure to engage with information technology and employment-related concerns were commonly cited as reasons for not responding. In this population, 11 responses provided a profile with sufficient reliability to inform appraisal (G = 0.7). Performance on the instrument was closely and significantly correlated with performance on a KSF questionnaire. This is the first contemporary psychometric evaluation of an MSF instrument for nurses. MSF appears to be as valid and reliable as an assessment method to inform appraisal in nurses as it is in other health professional groups. © 2015 The Alliance for Continuing Education in the Health Professions, the Society for Academic Continuing Medical Education, and the Council on Continuing Medical Education, Association for Hospital Medical Education.

  16. Integrated Support Center for Nuclear Nonproliferation and Security

    International Nuclear Information System (INIS)

    Kimura, Naohito; Naoi, Yosuke

    2010-01-01

    In April 2010, at the Nuclear Security Summit, Japan demonstrated its commitment to the strengthening of nuclear non-proliferation and nuclear security and announced the establishment of the Integrated Comprehensive Support Center for Nuclear Non-proliferation and Nuclear Security in the Japan Atomic Energy Agency (JAEA), under the guidance and authority of the Ministry of Education, Culture, Sports and Science and Technology (MEXT), and in cooperation with other ministries. The goal of the Center is to strengthen nuclear non-proliferation and security in emerging nuclear power countries by sharing Japan's accumulated experiences in its peaceful use of nuclear energy. To achieve its goal, the Center serves three functions: (1) human resource and capacity building, (2) infrastructure development and technical assistance and (3) international coordination and cooperation. The Center will offer three types of training courses to strengthen human resources and capacity building in emerging nuclear power countries. In the Training Course on Nuclear Security, the participants will learn the design and evaluation process for physical protection and detection of and response to illegal or unauthorized acts related to nuclear materials. They will learn these issues not only through lectures and training but also using mockup facilities and virtual reality systems. Second, in the Training Course on Safeguards and State System of Accounting for and Control of Nuclear Material (SSAC), the Center will teach the experience of advanced safeguards activities in Japan for its full-scale nuclear fuel cycle facilities as a non-nuclear weapon state. The participants will learn the IAEA and national safeguards systems, the material accounting system and inspector activities. Third, in the Training on the International Nuclear Nonproliferation Framework, the participants will learn the international framework of nuclear non-proliferation including the IAEA safeguards system and

  17. Integrated models to support multiobjective ecological restoration decisions.

    Science.gov (United States)

    Fraser, Hannah; Rumpff, Libby; Yen, Jian D L; Robinson, Doug; Wintle, Brendan A

    2017-12-01

    Many objectives motivate ecological restoration, including improving vegetation condition, increasing the range and abundance of threatened species, and improving species richness and diversity. Although models have been used to examine the outcomes of ecological restoration, few researchers have attempted to develop models to account for multiple, potentially competing objectives. We developed a combined state-and-transition, species-distribution model to predict the effects of restoration actions on vegetation condition and extent, bird diversity, and the distribution of several bird species in southeastern Australian woodlands. The actions reflected several management objectives. We then validated the models against an independent data set and investigated how the best management decision might change when objectives were valued differently. We also used model results to identify effective restoration options for vegetation and bird species under a constrained budget. In the examples we evaluated, no one action (improving vegetation condition and extent, increasing bird diversity, or increasing the probability of occurrence for threatened species) provided the best outcome across all objectives. In agricultural lands, the optimal management actions for promoting the occurrence of the Brown Treecreeper (Climacteris picumnus), an iconic threatened species, resulted in little improvement in the extent of the vegetation and a high probability of decreased vegetation condition. This result highlights that the best management action in any situation depends on how much the different objectives are valued. In our example scenario, no management or weed control were most likely to be the best management options to satisfy multiple restoration objectives. Our approach to exploring trade-offs in management outcomes through integrated modeling and structured decision-support approaches has wide application for situations in which trade-offs exist between competing

  18. Support functions and the integration of set-valued mappings

    International Nuclear Information System (INIS)

    Goodman, G.S.

    1976-01-01

    l. Definition of support functions; 2. Characteristic properties of support functions; 3. Examples of support functions; 4. Directional derivatives of support functions; 5. Further properties of h(y*; x*); 6. Extremal faces and their support functions; 7. The fundamental equations in Rsup(n); 8. Consequences of the fundamental equations in Rsup(n); 9. Extreme points; 10. Theorem of Kudo; 11. Comments on Kudo's theorem. (author)

  19. Integrated Case Based and Rule Based Reasoning for Decision Support

    OpenAIRE

    Eshete, Azeb Bekele

    2009-01-01

    This project is a continuation of my specialization project which was focused on studying theoretical concepts related to case based reasoning method, rule based reasoning method and integration of them. The integration of rule-based and case-based reasoning methods has shown a substantial improvement with regards to performance over the individual methods. Verdande Technology As wants to try integrating the rule based reasoning method with an existing case based system. This project focu...

  20. Longitudinal Evaluation of the Integration of Digital Musical Instruments into Existing Compositional Work Processes

    DEFF Research Database (Denmark)

    Gelineck, Steven; Serafin, Stefania

    2012-01-01

    This paper explores a longitudinal approach to the qualitative evaluation of a set of digital musical instruments, which were developed with a focus on creativity and exploration. The instruments were lent to three electronic musicians/composers for a duration of four weeks. Free exploration...

  1. The balanced scorecard as a potential instrument for supporting planning and improvement in accounting education: Comparative survey findings

    Directory of Open Access Journals (Sweden)

    CJ Cronje

    2004-04-01

    Full Text Available This paper is firstly a comparison of the components of a potential balanced scorecard for accounting departments of universities in South Africa and Australia. Secondly, the various suggested measurement criteria of the balanced scorecard components are also compared. The findings of the research paper indicate no significant differences. The conclusion is that the balanced scorecard constitutes a potential instrument for supporting the planning and improvement of the accounting education environment.

  2. Work station learning activities: a flexible and scalable instrument for integrating across basic subjects in biomedical education.

    Science.gov (United States)

    González-Soltero, Rocío; Learte, Ana Isabel R; Sánchez, Ana Mª; Gal, Beatriz

    2017-11-29

    Establishing innovative teaching programs in biomedical education involves dealing with several national and supra-national (i.e. European) regulations as well as with new pedagogical and demographic demands. We aimed to develop and validate a suitable instrument to integrate activities across preclinical years in all Health Science Degrees while meeting requirements of national quality agencies. The new approach was conceived at two different levels: first, we identified potentially integrative units from different fields according to national learning goals established for each preclinical year (national quality agency regulations). Secondly, we implemented a new instrument that combines active methodologies in Work Station Learning Activities (WSLA), using clinical scenarios as a guiding common thread to instruct students from an integrated perspective. We evaluated students' perception through a Likert-type survey of a total of 118 students enrolled in the first year of the Bachelor's Degree in Medicine. Our model of integrated activities through WSLA is feasible, scalable and manageable with large groups of students and a minimum number of instructors, two major limitations in many medical schools. Students' perception of WSLA was positive in overall terms. Seventy nine percent of participants stated that WSLA sessions were more useful than non-integrated activities. Eighty three percent confirmed that the WSLA methodology was effective at integrating concepts covered by different subjects. The WSLA approach is a flexible and scalable instrument for moving towards integrated curricula, and it can be successfully adapted to teach basic subjects in preclinical years of Health Science degrees. WSLA can be applied to large groups of students in a variety of contexts or environments using clinical cases as connecting threads.

  3. Advanced Instrumentation, Information, and Control Systems Technologies Research in Support of Light Water Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Hallbert, Bruce P.; Kenneth, Thomas [Idaho National Laboratory, Idaho (United States)

    2014-08-15

    The Advanced Instrumentation, Information, and Control (II and C) Systems Technologies Pathway conducts targeted research and development (R and D) to address aging and reliability concerns with the legacy instrumentation and control and related information systems of the U.S. operating light water reactor (LWR) fleet. This work involves two major goals to ensure that legacy analog II and C systems are not life-limiting issues for the LWR fleet, and to implement digital II and C technology in a manner that enables broad innovation and business improvement in the nuclear power plant operating model. Resolving long-term operational concerns with the II and C systems contributes to the long-term sustainability of the LWR fleet, which is vital to the nation's energy and environmental security.

  4. Advanced Instrumentation, Information, and Control Systems Technologies Research in Support of Light Water Reactors

    International Nuclear Information System (INIS)

    Hallbert, Bruce P.; Kenneth, Thomas

    2014-01-01

    The Advanced Instrumentation, Information, and Control (II and C) Systems Technologies Pathway conducts targeted research and development (R and D) to address aging and reliability concerns with the legacy instrumentation and control and related information systems of the U.S. operating light water reactor (LWR) fleet. This work involves two major goals to ensure that legacy analog II and C systems are not life-limiting issues for the LWR fleet, and to implement digital II and C technology in a manner that enables broad innovation and business improvement in the nuclear power plant operating model. Resolving long-term operational concerns with the II and C systems contributes to the long-term sustainability of the LWR fleet, which is vital to the nation's energy and environmental security

  5. Instrumentation Facility

    Data.gov (United States)

    Federal Laboratory Consortium — Provides instrumentation support for flight tests of prototype weapons systems using a vast array of airborne sensors, transducers, signal conditioning and encoding...

  6. Supported Employment in Connecticut: An Examination of Integration and Wage Outcomes.

    Science.gov (United States)

    Helms, Barbara L.; And Others

    1991-01-01

    Study of a sample of 93 individuals with disabilities participating in supported employment programs in Connecticut found that monthly wages and levels of integration increased significantly when compared to working situations prior to supported employment placement. (JDD)

  7. INTEGRATED ON-BOARD COMPUTING SYSTEMS: PRESENT SITUATION REVIEW AND DEVELOPMENT PROSPECTS ANALYSIS IN THE AVIATION INSTRUMENT-MAKING INDUSTRY

    Directory of Open Access Journals (Sweden)

    P. P. Paramonov

    2013-03-01

    Full Text Available The article deals with present situation review and analysis of development prospects for integrated on-board computing systems, used in the aviation instrument-making industry. The main attention is paid to the projects carried out in the framework of an integrated modular avionics. Hierarchical levels of module design, crates (onboard systems and aviation complexes are considered in detail. Examples of the existing products of our country and from abroad and their brief technical characteristics are given and voluminous bibliography on the subject matter as well.

  8. From Silence to Golden: The Slow Integration of Instruments into Christian Worship

    Directory of Open Access Journals (Sweden)

    Jonathan M. Lyons

    2017-03-01

    Full Text Available The Christian church’s stance on the use of instruments in sacred music shifted through influences of church leaders, composers, and secular culture. Synthesizing the writings of early church leaders and church historians reveals a clear progression. The early musical practices of the church were connected to the Jewish synagogues. As recorded in the Old Testament, Jewish worship included instruments as assigned by one’s priestly tribe. Eventually, early church leaders rejected that inclusion and developed a rather robust argument against instruments in liturgical worship. The totalitarian stance on musical instruments in sacred worship began to loosen as the organ increased in use and popularity. Organs began to find a more regular place in churches by the twelfth century. While organ music set a precedent which will later allow for the entry of other instruments into the sanctuary, it took quite a while to do so. As the Protestant Reformation changed the face of the church, Martin Luther served a crucial role, not just as a theological leader, but also as the center of a new musical movement in the church. This Reformation began a series of reactions that eventually leads to the church’s general acceptance of instruments in sacred worship.

  9. An Integrative Review of Self-Efficacy Measurement Instruments in Youth with Type 1 Diabetes (T1DM)

    Science.gov (United States)

    Rasbach, Lisa; Jenkins, Carolyn; Laffel, Lori

    2014-01-01

    Purpose The purpose of this study is to assess the extant literature on instruments used to measure self-efficacy in youth with type 1 diabetes (T1DM) and their caregivers and to critically evaluate these measurements. Methods An integrative review (2003–2013) was conducted searching PsycINFO, Cumulative Index to Nursing and Allied Health Literature (CINAHL), and U.S. National Library of Medicine PubMed service (PubMed) databases using key words diabetes, type 1 diabetes, and self-efficacy. The authors reviewed the resulting294 references for inclusion criteria of (a) sample of youth with T1DM or sample of caregivers of youth with T1DM, (b) description of the self-efficacy instrument as primary research, and (c) the instrument measured self-efficacy specifically related to diabetes management. Forty-five articles out of the initial 294 met criteria. Results Of the 45 articles, 10 different self-efficacy instruments were identified. The primary theoretical framework used was Bandura’s social cognitive theory and model of self-efficacy. Most participants were white middle class T1DM youth. Evaluations to assess validity often were not reported; however, a majority of studies reported high internal consistency of the instruments. Conclusions Sample homogeneity could limit the applicability of results to certain patient populations. Further psychometric analysis, including validity assessments, should be conducted in more diverse samples. Development of valid and reliable instruments for measuring self-efficacy that are sensitive to change across a wider caregiver base over time is necessary. While this review examined reliable and valid instruments used in research, future opportunities include evaluation of measuring self-efficacy in T1DM youth exposed to recent advances in diabetes management technologies. PMID:25216655

  10. General support for integrated assessment research. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Dowlatabadi, Hadi

    2001-03-01

    The climate change problem spans an extraordinarily large number of disciplines from earth sciences to social and political sciences. The interaction of processes described by these different fields is why climate change is such a complex issue. Keeping track of these interactions and bringing coherence to the assumptions underlying each disciplinary insight on the climate problem is a massive undertaking. Integrated assessment is an interdisciplinary approach designed to provide systematic evaluations of technically complex problems such as the analysis of environmental change challenges facing humanity. Ph.D. theses stemming from this application are summarized. Then some aspects of Integrated Climate Assessment Models are described.

  11. Effectiveness of Teamwork in an Integrated Care Setting for Patients with COPD: Development and Testing of a Self-Evaluation Instrument for Interprofessional Teams

    Directory of Open Access Journals (Sweden)

    Anneke N Van Dijk-de Vries

    2016-04-01

    Full Text Available Introduction: Teamwork between healthcare providers is conditional for the delivery of integrated care. This study aimed to assess the usefulness of the conceptual framework Integrated Team Effectiveness Model for developing and testing of the Integrated Team Effectiveness Instrument. Theory and methods: Focus groups with healthcare providers in an integrated care setting for people with chronic obstructive pulmonary disease (COPD were conducted to examine the recognisability of the conceptual framework and to explore critical success factors for collaborative COPD practice out of this framework. The resulting items were transposed into a pilot instrument. This was reviewed by expert opinion and completed 153 times by healthcare providers. The underlying structure and internal consistency of the instrument were verified by factor analysis and Cronbach’s alpha. Results: The conceptual framework turned out to be comprehensible for discussing teamwork effectiveness. The pilot instrument measures 25 relevant aspects of teamwork in integrated COPD care. Factor analysis suggested three reliable components: teamwork effectiveness, team processes and team psychosocial traits (Cronbach’s alpha between 0.76 and 0.81. Conclusions and discussion: The conceptual framework Integrated Team Effectiveness Model is relevant in developing a practical full-spectrum instrument to facilitate discussing teamwork effectiveness. The Integrated Team Effectiveness Instrument provides a well-founded basis to self-evaluate teamwork effectiveness in integrated COPD care by healthcare providers. Recommendations are provided for the improvement of the instrument.

  12. Effectiveness of Teamwork in an Integrated Care Setting for Patients with COPD: Development and Testing of a Self-Evaluation Instrument for Interprofessional Teams.

    Science.gov (United States)

    Van Dijk-de Vries, Anneke N; Duimel-Peeters, Inge G P; Muris, Jean W; Wesseling, Geertjan J; Beusmans, George H M I; Vrijhoef, Hubertus J M

    2016-04-08

    Teamwork between healthcare providers is conditional for the delivery of integrated care. This study aimed to assess the usefulness of the conceptual framework Integrated Team Effectiveness Model for developing and testing of the Integrated Team Effectiveness Instrument. Focus groups with healthcare providers in an integrated care setting for people with chronic obstructive pulmonary disease (COPD) were conducted to examine the recognisability of the conceptual framework and to explore critical success factors for collaborative COPD practice out of this framework. The resulting items were transposed into a pilot instrument. This was reviewed by expert opinion and completed 153 times by healthcare providers. The underlying structure and internal consistency of the instrument were verified by factor analysis and Cronbach's alpha. The conceptual framework turned out to be comprehensible for discussing teamwork effectiveness. The pilot instrument measures 25 relevant aspects of teamwork in integrated COPD care. Factor analysis suggested three reliable components: teamwork effectiveness, team processes and team psychosocial traits (Cronbach's alpha between 0.76 and 0.81). The conceptual framework Integrated Team Effectiveness Model is relevant in developing a practical full-spectrum instrument to facilitate discussing teamwork effectiveness. The Integrated Team Effectiveness Instrument provides a well-founded basis to self-evaluate teamwork effectiveness in integrated COPD care by healthcare providers. Recommendations are provided for the improvement of the instrument.

  13. Current integrator on the base of the F30 digital instrument

    International Nuclear Information System (INIS)

    Birulev, M.S.; Fefilov, B.V.

    1979-01-01

    A simple circuit of a current integrator has been developed making possible not only the measurement but also integration of currents in the range from 10 -10 to 10 -3 A. The integrator consists of a scaler and a digital amperevoltmeter. A basic circuit of the scaler comprising four integrated-circuit decades is presented. The integrator possesses a rather high sensitivity and low input resistance which is of special importance in measuring small currents in accelerator targets having a relatively low and instable resistance

  14. Towards an integrated approach in supporting microbiological food safety decisions

    DEFF Research Database (Denmark)

    Havelaar, A.H.; Braunig, J.; Christiansen, K.

    2007-01-01

    an integrated scientific approach combining veterinary and medical epidemiology, risk assessment for the farm-to-fork food chain as well as agricultural and health economy. Scientific advice is relevant in all stages of the policy cycle: to assess the magnitude of the food safety problem, to define...

  15. Organizational Support of Technology Integration in One School in Lebanon

    Science.gov (United States)

    Zgheib, Rosine S.

    2013-01-01

    Technology has been at the center of heated debates in educational settings driving schools to compete for the best technological equipments. However, in Lebanon there is a lag in technology integration matching twenty first century advances. Several barriers related to teacher attitudes, lack of technical skills and organizational constraints to…

  16. Colleges' Experiences: Integrating Support Services for Military Veterans

    Science.gov (United States)

    Karp, Melinda Mechur; Klempin, Serena

    2017-01-01

    To improve the educational experiences and outcomes of student veterans, the Kisco Foundation developed the Kohlberg Prize in 2015. Two cohorts of colleges were awarded competitive grants to enhance their veterans services. This piece examines the process of creating integrated services for student veterans through the institutionalization of…

  17. Supporting Public Administration with an Integrated BPR Environment

    Science.gov (United States)

    Ciaghi, Aaron; Villafiorita, Adolfo; Weldemariam, Komminist; Mattioli, Andrea; Phan, Quoc-Sang

    The definition or redesign of Public Administration (PA) procedures is particularly challenging. This is, for example, due to the requirement of cooperation of different organizational units and actors, different laws and procedures for the production of several artifacts, and maintaining traceability while integrating processes with new laws.

  18. Integrating biodiversity concepts with good governance to support ...

    African Journals Online (AJOL)

    2005-10-04

    Oct 4, 2005 ... support water resources management in South Africa. PJ Ashton1*, MJ Patrick2, HM .... Figure 1 shows that human activities, motivated by a diverse array of goals and .... catchment management strategy. • Legislation is the ...

  19. How to Support Children with Mathematical Learning Disabilities Learning to Play an Instrument?

    Directory of Open Access Journals (Sweden)

    Annemie Desoete

    2012-01-01

    Full Text Available In this study, children with a mathematical learning disability (=14 and age-matched peers without learning disabilities (=14 as well as their parents and teachers were interviewed on how they experienced playing an instrument (guitar, drum, flute, violin, trombone, horn, and piano and on what helped them using a qualitative interactive interview with a flexible agenda to discover the interviewee’s own framework of meanings. Thematic analyses mentioned intrinsic motivation, extrinsic motivation, and self-efficacy as important. Some children with MLD were found to have a real musical talent and a very good musical ear and memory for sounds. However, all children with MLD seemed more dependent on the aid of parents, sibling, peers, and teachers. They had to study harder and needed more time to study, more practice, and a more structured approach.

  20. Government programs for supporting and protecting young consumers: Instruments of food policy in Romania

    Directory of Open Access Journals (Sweden)

    Ene Corina

    2014-01-01

    Full Text Available In recent years, a number of preoccupations at the global, regional and national level have been aimed to find solutions to the current problems in the field of food consumption in children and young people, given the fact that both food insufficiency and food abuse generate negative effects on health. In Romania, the economic context consisting of the existence of a large number of children whose diet is insufficient made European programs for granting food in schools, during class hours, to be useful and to have social relevance. The article examines, starting from the Romanian legislative framework underpinning such programs, the coordinates of these efforts, concluding that they represent in the same time instruments of national food policy.

  1. Fiscal instruments for the financial support of renewable in the Netherlands

    International Nuclear Information System (INIS)

    Kwant, K.W.; Iepsma, J.; Pfeiffer, A.E.

    1997-01-01

    Green electricity is not a fiscal instrument, but rather a commercial way of selling renewable energy. Some utility providers start selling green electricity at a premium rate of about 4 cents above the normal price of 28.5 cents/kWhe. The additional sum is used to pay the producers of renewable electricity. In the Netherlands, the new green investment scheme became operational in January 1995. The idea is that private income from green investment, the dividend or interest on these specific green funds, should not be subject to income tax. This allows Green Funds to offer a lower interest rate to the public and thereby make the money available at a lower interest rate also to the green projects. (EG)

  2. Fiscal instruments for the financial support of renewable in the Netherlands

    Energy Technology Data Exchange (ETDEWEB)

    Kwant, K W; Iepsma, J; Pfeiffer, A E [Novem, Netherlands Agency for Energy and the Envionment, Utrecht (Netherlands)

    1997-08-01

    Green electricity is not a fiscal instrument, but rather a commercial way of selling renewable energy. Some utility providers start selling green electricity at a premium rate of about 4 cents above the normal price of 28.5 cents/kWhe. The additional sum is used to pay the producers of renewable electricity. In the Netherlands, the new green investment scheme became operational in January 1995. The idea is that private income from green investment, the dividend or interest on these specific green funds, should not be subject to income tax. This allows Green Funds to offer a lower interest rate to the public and thereby make the money available at a lower interest rate also to the green projects. (EG)

  3. Governance in support of integrated flood risk management? The case of Romania

    NARCIS (Netherlands)

    Vinke-de Kruijf, Joanne; Kuks, Stefanus M.M.; Augustijn, Dionysius C.M.

    2015-01-01

    Building on an existing model of governance, this paper aims to assess the supportiveness of Romania׳s structural flood risk governance context towards integrated flood risk management. We assert that a governance structure supports the development and implementation of integrated flood risk

  4. Incorporating Applied Behavior Analysis to Assess and Support Educators' Treatment Integrity

    Science.gov (United States)

    Collier-Meek, Melissa A.; Sanetti, Lisa M. H.; Fallon, Lindsay M.

    2017-01-01

    For evidence-based interventions to be effective for students they must be consistently implemented, however, many teachers struggle with treatment integrity and require support. Although many implementation support strategies are research based, there is little empirical guidance about the types of treatment integrity, implementers, and contexts…

  5. Design Through Integration of On-Board Calibration Device with Imaging Spectroscopy Instruments

    Science.gov (United States)

    Stange, Michael

    2012-01-01

    The main purpose of the Airborne Visible and Infrared Imaging Spectroscopy (AVIRIS) project is to "identify, measure, and monitor constituents of the Earth's surface and atmosphere based on molecular absorption and particle scattering signatures." The project designs, builds, and tests various imaging spectroscopy instruments that use On-Board Calibration devices (OBC) to check the accuracy of the data collected by the spectrometers. The imaging instrument records the spectral signatures of light collected during flight. To verify the data is correct, the OBC shines light which is collected by the imaging spectrometer and compared against previous calibration data to track spectral response changes in the instrument. The spectral data has the calibration applied to it based on the readings from the OBC data in order to ensure accuracy.

  6. Preliminary analysis of an integrated logistics system for OSSA payloads. Volume 2: OSSA integrated logistics support strategy

    Science.gov (United States)

    Palguta, T.; Bradley, W.; Stockton, T.

    1988-01-01

    The purpose is to outline an Office of Space Science and Applications (OSSA) integrated logistics support strategy that will ensure effective logistics support of OSSA payloads at an affordable life-cycle cost. Program objectives, organizational relationships, and implementation of the logistics strategy are discussed.

  7. Nuclear instrumentation system for the integrated digital I and C system

    International Nuclear Information System (INIS)

    Isobe, Yuji; Nakamura, Shingo

    2005-01-01

    Development of a new nuclear instrumentation (NI) system has been done. The new system is suitable for the digital instrumentation and control (I and C) systems. Higher reliability and lower development costs have been achieved by applying good performance circuits with sufficient experience of the conventional NI system. Human-system interface (HSI) and maintainability have been improved comparing with the conventional NI system because of the partial digitalisation. The new NI system has been manufactured and validated. We are finally verifying the total performance now

  8. Nuclear instrumentation system for the integrated digital I and C system

    Energy Technology Data Exchange (ETDEWEB)

    Isobe, Yuji [Mitsubishi Heavy Industries, Tokyo (Japan); Nakamura, Shingo [Mitsubishi, Electric Corporation, Tokyo (Japan)

    2005-11-15

    Development of a new nuclear instrumentation (NI) system has been done. The new system is suitable for the digital instrumentation and control (I and C) systems. Higher reliability and lower development costs have been achieved by applying good performance circuits with sufficient experience of the conventional NI system. Human-system interface (HSI) and maintainability have been improved comparing with the conventional NI system because of the partial digitalisation. The new NI system has been manufactured and validated. We are finally verifying the total performance now.

  9. Auctions for Renewable Support in Denmark:Instruments and lessons learnt

    DEFF Research Database (Denmark)

    Kitzing, Lena; Wendring, Paul; Wigan, Fabian

    This report deals with all past and ongoing auctions for renewable support in Denmark. Since 2004, five single-item, technology-specific offshore wind auctions were held, with one more currently ongoing. One multi-item, multi-site nearshore wind auction is currently ongoing.......This report deals with all past and ongoing auctions for renewable support in Denmark. Since 2004, five single-item, technology-specific offshore wind auctions were held, with one more currently ongoing. One multi-item, multi-site nearshore wind auction is currently ongoing....

  10. Support schemes and vertical integration-Who skims the cream?

    International Nuclear Information System (INIS)

    Ropenus, Stephanie; Jensen, Stine Grenaa

    2009-01-01

    This paper examines how the effectiveness of feed-in tariffs for distributed generators, producing renewable electricity, depends on industry structure, i.e., vertical integration vs. unbundling. A stylized analytical model with a monopolist and a competitive fringe (distributed generators) will be developed to analyze the impact of feed-in tariffs on renewable power production. The vertically integrated monopolist maximizes profits by setting the electricity price for residual demand and a network access charge incurred by the fringe. The fringe receives a fixed feed-in tariff per unit of electricity produced. Under vertical integration, a rise in the feed-in tariff induces the monopolist to raise access charges for fringe firms and skim part of their additional income. This partially offsets the supply increase of the fringe firms stimulated by the feed-in tariff. However, in the case of effective unbundling with an externally set access charge, there is no possibility for the monopolist to extract part of the fringe's profit. Then, the feed-in tariff fully accrues to the competitive fringe, and its supply will further increase. This setting will be extended to horizontal expansion when the monopolist also enters the renewable production segment. The effects on prices and output will be derived and compared

  11. Strengthening the Regional Integration in Central and Eastern Europe through Cohesion Policy Instruments and Cooperation among Stock Exchanges

    Directory of Open Access Journals (Sweden)

    JULIA STEFANOVA

    2014-05-01

    Full Text Available The research paper is focused on the analysis of two ways of strengthening the regional integration in the Central and Eastern Europe – through the Cohesion policy instruments and cooperation among stock exchanges. Substantial benefits from the regional integration through cohesion policy include economic and social prosperity, political understanding. It should be further intensified, as it contributes to reduce regional disparities, exchange knowledge and best practices, ensure economic development. On the other hand, the deepening intra-regional cooperation among CEE stock exchanges leads to quantitative and qualitative changes in the course of their consolidation. Some assumptions are reached regarding expected changes on the Bulgarian capital market in the course of intensifying its intra-regional integrational links to CEE capital markets in conformity with set strategic priorities.

  12. Design and Evaluation of a Prompting Instrument to Support Learning within the Diffusion Simulation Game

    Science.gov (United States)

    Kwon, Seolim; Lara, Miguel; Enfield, Jake; Frick, Theodore

    2013-01-01

    Conducting an iterative usability testing, a set of prompts used as a form of instructional support was developed in order to facilitate the comprehension of the diffusion of innovations theory (Rogers, 2003) in a simulation game called the Diffusion Simulation Game (DSG) (Molenda & Rice, 1979). The six subjects who participated in the study…

  13. A Confirmatory Factor Analysis of an Abbreviated Social Support Instrument: The MOS-SSS

    Science.gov (United States)

    Gjesfjeld, Christopher D.; Greeno, Catherine G.; Kim, Kevin H.

    2008-01-01

    Objective: Confirm the factor structure of the original 18-item Medical Outcome Study Social Support Survey (MOS-SSS) as well as two abbreviated versions in a sample of mothers with a child in mental health treatment. Method: The factor structure, internal consistency, and concurrent validity of the MOS-SSS were assessed using a convenience sample…

  14. Development and evaluation of a computerbased instrument supporting event analysis in NPP. Final report

    International Nuclear Information System (INIS)

    Szameitat, S.

    2002-11-01

    Information technologies (IT) in safety management are seen as opportunity to control and reduce risks. The processing of safety-critical event information, a central function of safety management, could be more efficient using computers. But organization structures are different, the processes of experience transfer are complex and the opportunities of IT are broad. To implement a support system is to question about design criteria of computer support for an event-based safety management system (eSMS). Two studies were conducted. Study 1 compares the organizational, technical and legal conditions for Safety Management in the German Nuclear Industry and the Norwegian Offshore Industry. It could identify design criteria, which independent from the operator influence the eSMS. Study 2 compares the eSMS of different nuclear power plants analyzing the organization structures and processes. Those internal and external criteria have a significant influence on a efficient design of a system support for eSMS. The third study makes the options and impact of computer support on experience transfer in eSMS as subject of discussion. For this purpose a simulation environment has been created. Groups investigated typical event scenarios from a nuclear power plant for contributing factors. The communication medium has been manipulated (face-to-face versus computer-mediated). Results of 15 groups indicate, that the collection of event information was promoted by computer-mediated communication. This is the foundation of the identification of contributing factors. The depth of analysis has not been influenced. Computer mediation hampers the learning of facts. IT can support safety management effectively. (orig.) [de

  15. Protein Analysis Using Real-Time PCR Instrumentation: Incorporation in an Integrated, Inquiry-Based Project

    Science.gov (United States)

    Southard, Jonathan N.

    2014-01-01

    Instrumentation for real-time PCR is used primarily for amplification and quantitation of nucleic acids. The capability to measure fluorescence while controlling temperature in multiple samples can also be applied to the analysis of proteins. Conformational stability and changes in stability due to ligand binding are easily assessed. Protein…

  16. Digital System Categorization Methodology to Support Integration of Digital Instrumentation and Control Models into PRAs

    International Nuclear Information System (INIS)

    Arndt, Steven A.

    2011-01-01

    It has been suggested that by categorizing the various digital systems used in safety critical applications in nuclear power plants, it would be possible to determine which systems should be modeled in the analysis of the larger plant wide PRA, at what level of detail the digital system should be modeled and using which methods. The research reported in this paper develops a categorization method using system attributes to permit a modeler to more effectively model the systems that will likely have the most critical contributions to the overall plant safety and to more effectively model system interactions for those digital systems where the interactions are most important to the overall accuracy and completeness of the plant PRA. The proposed methodology will categorize digital systems based on certain attributes of the systems themselves and how they will be used in the specific application. This will help determine what digital systems need to be modeled and at what level of detail, and can be used to guide PRA analysis and regulatory reviews. The three-attribute categorization strategy that was proposed by Arndt is used as the basis for the categorization methodology developed here. The first attribute, digital system complexity, is based on Type Il interactions defined by Aldemir and an overall digital system size and complexity index. The size and complexity index used are previously defined software complexity metrics. Potential sub-attributes of digital system complexity include, design complexity, software complexity, hardware complexity, system function complexity and testability. The second attribute, digital system interactions/inter-conductivity, is a combination of Rushby's coupling and Ademir's Type I interactions. Digital systems that are loosely coupled and/or have very few Type I interaction would not interact dynamically with the overall system and would have a low interactions/inter-conductivity score. Potential sub-attributes of digital system inter-conductivity include, number and types of inputs and outputs, inter-system communications and the importance of timing of events in system communication. The third attribute is digital system importance. This attribute measure looks at both traditional risk important measures, such as component risk achievement worth, and the importance of the system is for maintaining defense-in depth concepts. Potential sub-attributes of digital system importance include, systems risk importance (F-V, RAW, etc.), importance with respect to defense-in depth and system error prorogation potential

  17. Digital System Categorization Methodology to Support Integration of Digital Instrumentation and Control Models into PRAs

    Energy Technology Data Exchange (ETDEWEB)

    Arndt, Steven A. [U.S. Nuclear Regulatory Commission, Washington D.C. (United States)

    2011-08-15

    It has been suggested that by categorizing the various digital systems used in safety critical applications in nuclear power plants, it would be possible to determine which systems should be modeled in the analysis of the larger plant wide PRA, at what level of detail the digital system should be modeled and using which methods. The research reported in this paper develops a categorization method using system attributes to permit a modeler to more effectively model the systems that will likely have the most critical contributions to the overall plant safety and to more effectively model system interactions for those digital systems where the interactions are most important to the overall accuracy and completeness of the plant PRA. The proposed methodology will categorize digital systems based on certain attributes of the systems themselves and how they will be used in the specific application. This will help determine what digital systems need to be modeled and at what level of detail, and can be used to guide PRA analysis and regulatory reviews. The three-attribute categorization strategy that was proposed by Arndt is used as the basis for the categorization methodology developed here. The first attribute, digital system complexity, is based on Type Il interactions defined by Aldemir and an overall digital system size and complexity index. The size and complexity index used are previously defined software complexity metrics. Potential sub-attributes of digital system complexity include, design complexity, software complexity, hardware complexity, system function complexity and testability. The second attribute, digital system interactions/inter-conductivity, is a combination of Rushby's coupling and Ademir's Type I interactions. Digital systems that are loosely coupled and/or have very few Type I interaction would not interact dynamically with the overall system and would have a low interactions/inter-conductivity score. Potential sub-attributes of digital system inter-conductivity include, number and types of inputs and outputs, inter-system communications and the importance of timing of events in system communication. The third attribute is digital system importance. This attribute measure looks at both traditional risk important measures, such as component risk achievement worth, and the importance of the system is for maintaining defense-in depth concepts. Potential sub-attributes of digital system importance include, systems risk importance (F-V, RAW, etc.), importance with respect to defense-in depth and system error prorogation potential.

  18. QUIN: Providing Integrated Analysis Support to Crime Investigators

    NARCIS (Netherlands)

    Smit, S.; Vecht, B. van der; Wermeskerken, F.J.P. van; Streefkerk, J.W.

    2016-01-01

    Crime investigators heavily rely on their large knowledge of criminal behavior. When investigating a new case, applying this knowledge can lead to cognitive overload and tunnel vision. Some support systems are developed to search through historical data and knowledge more easily, but still require

  19. Towards an integrated approach in supporting microbiological food safety decisions

    NARCIS (Netherlands)

    Havelaar, A.H.; Bräunig, J.; Christiansen, K.; Cornu, M.; Hald, T.; Mangen, M.J.J.; Molbak, K.; Pielaat, A.; Snary, E.; Pelt, van W.; Velthuis, A.G.J.; Wahlström, H.

    2007-01-01

    Decisions on food safety involve consideration of a wide range of concerns including the public health impact of foodborne illness, the economic importance of the agricultural sector and the food industry, and the effectiveness and efficiency of interventions. To support such decisions, we propose

  20. A Professional Learning Model Supporting Teachers to Integrate Digital Technologies

    Science.gov (United States)

    Sheffield, Rachel; Blackley, Susan; Moro, Paul

    2018-01-01

    Contemporary teachers have an obligation to support and scaffold students' learning in digital technologies and to do this in authentic contexts. In order for teachers to be successful in this, their own competency in digital technologies needs to be high, and their own 21st century learning skills of communication, collaboration, creativity and…

  1. Professional Learning Design Framework: Supporting Technology Integration in Alberta

    Science.gov (United States)

    van Thiel, Lydia

    2018-01-01

    Researchers around the world are interested in knowing how to support teachers in developing both their technology skills and their understanding of how educational technologies can provide opportunity to engage all learners at their skill and interest level in learning activities that were not possible without technology. The solution involves…

  2. Technology Roadmap Instrumentation, Control, and Human-Machine Interface to Support DOE Advanced Nuclear Energy Programs

    Energy Technology Data Exchange (ETDEWEB)

    Donald D Dudenhoeffer; Burce P Hallbert

    2007-03-01

    Instrumentation, Controls, and Human-Machine Interface (ICHMI) technologies are essential to ensuring delivery and effective operation of optimized advanced Generation IV (Gen IV) nuclear energy systems. In 1996, the Watts Bar I nuclear power plant in Tennessee was the last U.S. nuclear power plant to go on line. It was, in fact, built based on pre-1990 technology. Since this last U.S. nuclear power plant was designed, there have been major advances in the field of ICHMI systems. Computer technology employed in other industries has advanced dramatically, and computing systems are now replaced every few years as they become functionally obsolete. Functional obsolescence occurs when newer, more functional technology replaces or supersedes an existing technology, even though an existing technology may well be in working order.Although ICHMI architectures are comprised of much of the same technology, they have not been updated nearly as often in the nuclear power industry. For example, some newer Personal Digital Assistants (PDAs) or handheld computers may, in fact, have more functionality than the 1996 computer control system at the Watts Bar I plant. This illustrates the need to transition and upgrade current nuclear power plant ICHMI technologies.

  3. An integrated approach to endoscopic instrument tracking for augmented reality applications in surgical simulation training.

    Science.gov (United States)

    Loukas, Constantinos; Lahanas, Vasileios; Georgiou, Evangelos

    2013-12-01

    Despite the popular use of virtual and physical reality simulators in laparoscopic training, the educational potential of augmented reality (AR) has not received much attention. A major challenge is the robust tracking and three-dimensional (3D) pose estimation of the endoscopic instrument, which are essential for achieving interaction with the virtual world and for realistic rendering when the virtual scene is occluded by the instrument. In this paper we propose a method that addresses these issues, based solely on visual information obtained from the endoscopic camera. Two different tracking algorithms are combined for estimating the 3D pose of the surgical instrument with respect to the camera. The first tracker creates an adaptive model of a colour strip attached to the distal part of the tool (close to the tip). The second algorithm tracks the endoscopic shaft, using a combined Hough-Kalman approach. The 3D pose is estimated with perspective geometry, using appropriate measurements extracted by the two trackers. The method has been validated on several complex image sequences for its tracking efficiency, pose estimation accuracy and applicability in AR-based training. Using a standard endoscopic camera, the absolute average error of the tip position was 2.5 mm for working distances commonly found in laparoscopic training. The average error of the instrument's angle with respect to the camera plane was approximately 2°. The results are also supplemented by video segments of laparoscopic training tasks performed in a physical and an AR environment. The experiments yielded promising results regarding the potential of applying AR technologies for laparoscopic skills training, based on a computer vision framework. The issue of occlusion handling was adequately addressed. The estimated trajectory of the instruments may also be used for surgical gesture interpretation and assessment. Copyright © 2013 John Wiley & Sons, Ltd.

  4. Intelligent Electric Vehicle Integration - Domain Interfaces and Supporting Informatics

    DEFF Research Database (Denmark)

    Andersen, Peter Bach

    This thesis seeks to apply the field of informatics to the intelligent integration of electric vehicles into the power system. The main goal is to release the potential of electric vehicles in relation to a reliable, economically efficient power system based on renewables. To make intelligent EV...... and services in which the electric vehicle may be best suited to participate. The next stakeholder investigated is the distribution system operator representing the low voltage grid. The challenge is assessed by considering a number of grid impacts studies. Next, a set of grid congestion mitigation strategies...

  5. Support schemes and vertical integration - who skims the cream?

    DEFF Research Database (Denmark)

    Ropenus, Stephanie; Jensen, Stine Grenaa

    2009-01-01

    ) will be developed to analyze the impact of feed-in tariffs on renewable power production. The vertically integrated monopolist maximizes profits by setting the electricity price for residual demand and a network access charge incurred by the fringe. The fringe receives a fixed feed-in tariff per unit of electricity...... unbundling with an externally set access charge, there is no possibility for the monopolist to extract part of the fringe's profit. Then, the feed-in tariff fully accrues to the competitive fringe, and its supply will further increase. This setting will be extended to horizontal expansion when the monopolist...

  6. Getting better integrated into foreign markets supported by the incubator

    DEFF Research Database (Denmark)

    Dyhr Ulrich, Anna Marie; Gretzinger, Susanne; Hollensen, Svend

    The challenges associated with entering foreign growth markets, like BRIC markets, remain significant, especially for inexperienced SMEs. These challenges can include inadequate knowledge about a host country’s culture, norms, values and business environment, and a lack of embeddedness in the ind...... into the following two propositions: - The higher the level of the company’s accumulated experiential knowledge, the faster integration into the foreign market. - The use of incubator facilitates a faster integration into a specific high growth foreign market.......The challenges associated with entering foreign growth markets, like BRIC markets, remain significant, especially for inexperienced SMEs. These challenges can include inadequate knowledge about a host country’s culture, norms, values and business environment, and a lack of embeddedness...... in the industry networks abroad. Such barriers can often hinder successful foreign market entry. One concept to use for SMEs, which lack experiential knowledge when bridging new distant international growth markets, is the ‘incubator’. It is best described as a shared office-space facility, including a local...

  7. Efficient Dynamic Integrity Verification for Big Data Supporting Users Revocability

    Directory of Open Access Journals (Sweden)

    Xinpeng Zhang

    2016-05-01

    Full Text Available With the advent of the big data era, cloud data storage and retrieval have become popular for efficient data management in large companies and organizations, thus they can enjoy the on-demand high-quality cloud storage service. Meanwhile, for security reasons, those companies and organizations would like to verify the integrity of their data once storing it in the cloud. To address this issue, they need a proper cloud storage auditing scheme which matches their actual demands. Current research often focuses on the situation where the data manager owns the data; however, the data belongs to the company, rather than the data managers in the real situation which has been overlooked. For example, the current data manager is no longer suitable to manage the data stored in the cloud after a period and will be replaced by another one. The successor needs to verify the integrity of the former managed data; this problem is obviously inevitable in reality. In this paper, we fill this gap by giving a practical efficient revocable privacy-preserving public auditing scheme for cloud storage meeting the auditing requirement of large companies and organization’s data transfer. The scheme is conceptually simple and is proven to be secure even when the cloud service provider conspires with revoked users.

  8. Microdevelopment of Complex Featural and Spatial Integration with Contextual Support

    Directory of Open Access Journals (Sweden)

    Pamela L. Hirsch

    2015-01-01

    Full Text Available Complex spatial decisions involve the ability to combine featural and spatial information in a scene. In the present work, 4- through 9-year-old children completed a complex map-scene correspondence task under baseline and supported conditions. Children compared a photographed scene with a correct map and with map-foils that made salient an object feature or spatial property. Map-scene matches were analyzed for the effects of age and featural-spatial information on children’s selections. In both conditions children significantly favored maps that highlighted object detail and object perspective rather than color, landmark, and metric elements. Children’s correct performance did not differ by age and was suboptimal, but their ability to choose correct maps improved significantly when contextual support was provided. Strategy variability was prominent for all age groups, but at age 9 with support children were more likely to give up their focus on features and transition to the use of spatial strategies. These findings suggest the possibility of a U-shaped curve for children’s development of geometric knowledge: geometric coding is predominant early on, diminishes for a time in middle childhood in favor of a preference for features, and then reemerges along with the more advanced abilities to combine featural and spatial information.

  9. An integrated high temperature environmental cell for atom probe tomography studies of gas-surface reactions: Instrumentation and results

    International Nuclear Information System (INIS)

    Dumpala, S.; Broderick, S.R.; Bagot, P.A.J.; Rajan, K.

    2014-01-01

    An integrated environmental cell has been designed and developed for the latest generation of Atom Probe Tomography LEAP™ instruments, allowing controlled exposure of samples to gases at high temperatures. Following treatment, samples can be transferred through the LEAP vacuum system for subsequent APT analysis, which provides detailed information on changes to chemical microstructures following the reactions with near-atomic resolution. A full description of the cell is presented, along with some sample results on the oxidation of aluminum and two platinum-group alloys, demonstrating the capability of combining exposure/characterization functionality in a single instrument. - Highlights: • Designed and built atom probe environmental cell for in situ reactions. • Investigated Al oxidation, and demonstrated improvement with new cell. • in situ APT analysis of Pt-alloys showed surface segregation of Rh and Ir

  10. An Integrated Monitoring System Through 3d Laser Scanner and Traditional Instruments for Load Test on Arch Bridge

    Science.gov (United States)

    Pera, D.; Ferrando, I.

    2017-05-01

    The experimental campaign represents an example of how the careful design of the different test phases and the choice of the needed instrumentation are fundamental aspects to obtain a proper interpretation of the results, for future application on the real structures. Additionally, the present work represents a successful example of a combined monitoring system, integrating the traditional and innovative technical instrumentation for loading tests and geomatics survey techniques. The monitoring system has been designed with the aim of defining the load carrying capacity of a masonry arch bridge scaled model and to test the performances of a new retrofitting method. In particular, two different configuration have been considered: a first one with isolated arch and a second one with gravel fill on the arch.

  11. AN INTEGRATED MONITORING SYSTEM THROUGH 3D LASER SCANNER AND TRADITIONAL INSTRUMENTS FOR LOAD TEST ON ARCH BRIDGE

    Directory of Open Access Journals (Sweden)

    D. Pera

    2017-05-01

    Full Text Available The experimental campaign represents an example of how the careful design of the different test phases and the choice of the needed instrumentation are fundamental aspects to obtain a proper interpretation of the results, for future application on the real structures. Additionally, the present work represents a successful example of a combined monitoring system, integrating the traditional and innovative technical instrumentation for loading tests and geomatics survey techniques. The monitoring system has been designed with the aim of defining the load carrying capacity of a masonry arch bridge scaled model and to test the performances of a new retrofitting method. In particular, two different configuration have been considered: a first one with isolated arch and a second one with gravel fill on the arch.

  12. integrated aerospace technologies in support of precision agriculture

    International Nuclear Information System (INIS)

    Borfecchia, Flavio; De Cecco, Luigi; Martini, Sandro

    2015-01-01

    In a scenario where agriculture plays a role increasingly important and strategic, dissemination, in this field, these space technologies and advanced robotic, more and more accessible, responds We need to base decisions on information integrated, not only to increase the production, but also to ensure quality food to the people World, minimizing environmental impacts and climate, and enhancing biodiversity. In this context, applications based on these technologies are proving increasingly central role in tackling the challenges of productivity increase in agriculture required by the global market, with a view Environmental sustainability also focused on diffusion of green economy and circular, in which refer some of the experimental applications and on April conducted in ENEA. [it

  13. Hydroeconomic modeling to support integrated water resources management in China

    DEFF Research Database (Denmark)

    Davidsen, Claus

    resources. In this context, the PhD study focused on development of approaches to inform integrated water resources management to cope with multiple and coupled challenges faced in China. The proposed method is to formulate river water management as a joint hydroeconomic optimization problem that minimizes...... the system and allowed overdraft in dry years in return for increased recharge in wet years. Further, cost-effective recovery of an overdrafted groundwater aquifer was demonstrated. The third implementation assessed interactions of water resources and water quality management. Biochemical oxygen demand (BOD...... problem with a single surface water reservoir state variable. A comparison of different management scenarios was used to evaluate how the South-to-North Water Transfer Project will impact optimal water resources management. Scenarios with unregulated groundwater pumping at realistic pumping costs verified...

  14. Integration of a Miniaturized Conductivity Sensor into an Animal-Borne Instrument

    Science.gov (United States)

    2015-09-30

    an Animal -Borne Instrument Lars Boehme Sea Mammal Research Unit Scottish Oceans Institute University of St Andrews St Andrews, KY16 8LB United... Kingdom phone: +44 1334-462677 fax: +44 1334-463443 email: lb284@st-andrews.ac.uk Robin Pascal Sensors Development Group National...Oceanography Centre Southampton, SO14 3ZY United Kingdom phone: +44 2380-596138 fax: +44 2380-593029 email: rwp@nerc.ac.uk Phil Lovell

  15. 30 CFR 75.205 - Installation of roof support using mining machines with integral roof bolters.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Installation of roof support using mining... Roof Support § 75.205 Installation of roof support using mining machines with integral roof bolters. When roof bolts are installed by a continuous mining machine with intregal roof bolting equipment: (a...

  16. Eco label and integrated product policies. Supporting companies by networking

    International Nuclear Information System (INIS)

    Frey, M.; Iraldo, F.

    1999-01-01

    In 1998 IEFE Bocconi University (Italy) carried out a project for the diffusion of the European Commission Eco label, the certification of the environmental quality of products. What clearly emerges from this experience is that some Italian SMEs, among the most innovative and market-oriented, are prone and ready to grasp the opportunities connected with the Eco label adoption. The more these enterprises are capable of starting up a network of socio-institutional actors eager to support them in promoting the environmental quality of their products, the more they succeed in exploiting the above mentioned opportunities [it

  17. Compact Integrated DBR Laser Source for Absorption Lidar Instruments, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose to demonstrate a compact integrated laser module that addresses the requirements of the laser source in a water vapor differential absorption lidar (DIAL)...

  18. Supporting students' knowledge integration with technology-enhanced inquiry curricula

    Science.gov (United States)

    Chiu, Jennifer Lopseen

    Dynamic visualizations of scientific phenomena have the potential to transform how students learn and understand science. Dynamic visualizations enable interaction and experimentation with unobservable atomic-level phenomena. A series of studies clarify the conditions under which embedding dynamic visualizations in technology-enhanced inquiry instruction can help students develop robust and durable chemistry knowledge. Using the knowledge integration perspective, I designed Chemical Reactions, a technology-enhanced curriculum unit, with a partnership of teachers, educational researchers, and chemists. This unit guides students in an exploration of how energy and chemical reactions relate to climate change. It uses powerful dynamic visualizations to connect atomic level interactions to the accumulation of greenhouse gases. The series of studies were conducted in typical classrooms in eleven high schools across the country. This dissertation describes four studies that contribute to understanding of how visualizations can be used to transform chemistry learning. The efficacy study investigated the impact of the Chemical Reactions unit compared to traditional instruction using pre-, post- and delayed posttest assessments. The self-monitoring study used self-ratings in combination with embedded assessments to explore how explanation prompts help students learn from dynamic visualizations. The self-regulation study used log files of students' interactions with the learning environment to investigate how external feedback and explanation prompts influence students' exploration of dynamic visualizations. The explanation study compared specific and general explanation prompts to explore the processes by which explanations benefit learning with dynamic visualizations. These studies delineate the conditions under which dynamic visualizations embedded in inquiry instruction can enhance student outcomes. The studies reveal that visualizations can be deceptively clear

  19. Around the Table: Food Insecurity, Socioeconomic Status, and Instrumental Social Support among Women Living in a Rural Kenyan Island Community.

    Science.gov (United States)

    Nagata, Jason M; Fiorella, Kathryn J; Salmen, Charles R; Hickey, Matthew D; Mattah, Brian; Magerenge, Richard; Milner, Erin M; Weiser, Sheri D; Bukusi, Elizabeth A; Cohen, Craig R

    2015-01-01

    The objective of this study was to investigate the relationship among socioeconomic status, social support, and food insecurity in a rural Kenyan island community. A cross-sectional random sample of 111 female heads of households representing 583 household members were surveyed in Mfangano Island, Kenya from August to October 2010 using adaptations of the Household Food Insecurity Access Scale and the Medical Outcomes Study Social Support Survey. In multiple linear regression models, less instrumental social support, defined as concrete direct ways people help others (B = -0.81; 95% confidence interval [CI] -1.45 to -0.17), and decreased ownership scale based on owning material assets (B = -2.93; 95% CI -4.99 to -0.86) were significantly associated with increased food insecurity, controlling for age, education, marital status, and household size. Social support interventions geared at group capacity and resilience may be crucial adjuncts to improve and maintain the long term food security and health of persons living in low-resource regions.

  20. Optical HMI with biomechanical energy harvesters integrated in textile supports

    International Nuclear Information System (INIS)

    De Pasquale, G; De Pasquale, D; Kim, SG

    2015-01-01

    This paper reports the design, prototyping and experimental validation of a human-machine interface (HMI), named GoldFinger, integrated into a glove with energy harvesting from fingers motion. The device is addressed to medical applications, design tools, virtual reality field and to industrial applications where the interaction with machines is restricted by safety procedures. The HMI prototype includes four piezoelectric transducers applied to the fingers backside at PIP (proximal inter-phalangeal) joints, electric wires embedded in the fabric connecting the transducers, aluminum case for the electronics, wearable switch made with conductive fabrics to turn the communication channel on and off, and a LED. The electronic circuit used to manage the power and to control the light emitter includes a diodes bridge, leveling capacitors, storage battery and switch made by conductive fabric. The communication with the machine is managed by dedicated software, which includes the user interface, the optical tracking, and the continuous updating of the machine microcontroller. The energetic benefit of energy harvester on the battery lifetime is inversely proportional to the activation time of the optical emitter. In most applications, the optical port is active for 1 to 5% of the time, corresponding to battery lifetime increasing between about 14% and 70%. (paper)

  1. Optical HMI with biomechanical energy harvesters integrated in textile supports

    Science.gov (United States)

    De Pasquale, G.; Kim, SG; De Pasquale, D.

    2015-12-01

    This paper reports the design, prototyping and experimental validation of a human-machine interface (HMI), named GoldFinger, integrated into a glove with energy harvesting from fingers motion. The device is addressed to medical applications, design tools, virtual reality field and to industrial applications where the interaction with machines is restricted by safety procedures. The HMI prototype includes four piezoelectric transducers applied to the fingers backside at PIP (proximal inter-phalangeal) joints, electric wires embedded in the fabric connecting the transducers, aluminum case for the electronics, wearable switch made with conductive fabrics to turn the communication channel on and off, and a LED. The electronic circuit used to manage the power and to control the light emitter includes a diodes bridge, leveling capacitors, storage battery and switch made by conductive fabric. The communication with the machine is managed by dedicated software, which includes the user interface, the optical tracking, and the continuous updating of the machine microcontroller. The energetic benefit of energy harvester on the battery lifetime is inversely proportional to the activation time of the optical emitter. In most applications, the optical port is active for 1 to 5% of the time, corresponding to battery lifetime increasing between about 14% and 70%.

  2. Assessment of Wearable Technology for Integrated Decision Support

    Science.gov (United States)

    2016-05-01

    absorption of red  light by oxygen‐bound (or unbound)  hemoglobin   in the blood (see figure 9).  The measurement  is achieved by  shining both  red  light...Leadership  &  Education , Personnel, and Facilities (DOTMLPF) assessment. There may, however, be a clear  value  in keeping these decision support tools closer...Soldier mission sets.  The “Signature TrRacking for Optimized  Nutrition  and traininG” (STRONG) Lab at Air Force Research Labs at Wright Patterson Air

  3. Integrated conception of hardware/software mixed systems used in nuclear instrumentation

    International Nuclear Information System (INIS)

    Dias, Ailton F.; Sorel, Yves; Akil, Mohamed

    2002-01-01

    Hardware/software codesign carries out the design of systems composed by a hardware portion, with specific components, and a software portion, with microprocessor based architecture. This paper describes the Algorithm Architecture Adequation (AAA) design methodology - originally oriented to programmable multicomponent architectures, its extension to reconfigurable circuits and its application to design and development of nuclear instrumentation systems composed by programmable and configurable circuits. AAA methodology uses an unified model to describe algorithm, architecture and implementation, based on graph theory. The great advantage of AAA methodology is the utilization of a same model from the specification to the implementation of hardware/software systems, reducing the complexity and design time. (author)

  4. Shield calculation of project for instrument calibration integrated laboratory of IPEN-Sao Paulo, Brazil

    International Nuclear Information System (INIS)

    Barros, Gustavo A.S.J.; Caldas, Linda V.E.

    2009-01-01

    This work performed the shield calculation of the future rooms walls of the five X-ray equipment of the Instrument Calibration Laboratory of the IPEN, Sao Paulo, Brazil, which will be constructed in project of laboratory enlargement. The obtained results by application of a calculation methodology from an international regulation have shown that the largest thickness of shielding (25.7 cm of concrete or 7.1 mm of lead) will be of the wall which will receive the primary beam of the equipment with a 320 kV voltage. The cost/benefit analysis indicated the concrete as the best material option for the shielding

  5. Process and Tool Support for Ontology-Aware Life Support System Development and Integration, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Recent advances in ontology development support a rich description of entities that are modeled within a domain and how these entities relate to each other. However,...

  6. Public relations and political support in area-wide integrated pest management programmes that integrate the sterile insect technique

    International Nuclear Information System (INIS)

    Dyck, V.A.; Regidor Fernandez, E.E.; Reyes Flores, J.; Teruya, T.; Barnes, B.; Gomez Riera, P.; Lindquist, D.; Reuben, R.

    2005-01-01

    The public relations component of area-wide integrated pest management (AW-IPM) programmes that integrate the sterile insect technique (SIT) has a large impact on programme success. Full-time professionals should direct public relations activities and secure vital political support from governments and community organizations. Good communication among programme staff, and between programme staff and the public, is required to maintain participation and support, and to keep the work goal-oriented even when some programme activities are controversial. The media can be valuable and effective partners by informing the public about the real facts and activities of a programme, especially if this is done in a non-technical and straightforward way. Ongoing research support improves the programme technology, provides technical credibility on contentious issues, and solves operational problems. Programme failure can result from poor public relations and inadequate public support. (author)

  7. Analyzing policy support instruments and regulatory risk factors for wind energy deployment-A developers' perspective

    International Nuclear Information System (INIS)

    Luethi, Sonja; Praessler, Thomas

    2011-01-01

    A transition to a renewable energy system is high on the policy agenda in many countries. A promising energy source for a low-carbon energy future is wind. Policy-makers can attract wind energy development by providing attractive policy frameworks. This paper argues that apart from the level of financial support, both the risks stemming from the regulatory environment (legal security, administrative process and grid access) and the ability to finance projects play a critical role in determining the attractiveness of the development environment. It sheds light on how project developers trade off these different aspects and to what extent the attractiveness of a certain policy framework increases with the introduction of specific measures. Conjoint analysis is employed to provide empirical evidence on the preference of wind energy developers in the EU and the US. The analysis shows that developers' preferences are very similar across the studied regions and for different types of developers. Which policy measures could be most valuable depends on the specific existing environment. In some southeastern European countries, a reduction of administrative process duration may yield the highest utility gains, whereas, in the US, improvements in grid access regulation and an increase in remuneration levels may be more effective. - Highlights: → Paper suggests conjoint analysis as scenario tool for estimating potential effects of specific policy measures. → It provides a quantitative, empirical dataset of 119 onshore wind energy developers' preferences. → Results suggest that the aspects 'Legal security' and 'Remuneration' are important attributes. → Cluster analyses yields slightly different preferences for developers from EU and US.

  8. Fostering integrity in postgraduate research: an evidence-based policy and support framework.

    Science.gov (United States)

    Mahmud, Saadia; Bretag, Tracey

    2014-01-01

    Postgraduate research students have a unique position in the debate on integrity in research as students and novice researchers. To assess how far policies for integrity in postgraduate research meet the needs of students as "research trainees," we reviewed online policies for integrity in postgraduate research at nine particular Australian universities against the Australian Code for Responsible Conduct of Research (the Code) and the five core elements of exemplary academic integrity policy identified by Bretag et al. (2011 ), i.e., access, approach, responsibility, detail, and support. We found inconsistency with the Code in the definition of research misconduct and a lack of adequate detail and support. Based on our analysis, previous research, and the literature, we propose a framework for policy and support for postgraduate research that encompasses a consistent and educative approach to integrity maintained across the university at all levels of scholarship and for all stakeholders.

  9. Integration into Big Data: First Steps to Support Reuse of Comprehensive Toxicity Model Modules (SOT)

    Science.gov (United States)

    Data surrounding the needs of human disease and toxicity modeling are largely siloed limiting the ability to extend and reuse modules across knowledge domains. Using an infrastructure that supports integration across knowledge domains (animal toxicology, high-throughput screening...

  10. Integrating sensing across a broader spectrum to support homeland security

    Science.gov (United States)

    O'Brien, Thomas W.; Finkelstein, Marc

    2003-08-01

    All objects and activities give off energy in some part of the spectrum, may leave tell-tail signs from their previous activities (e.g., earth scaring or vapor trails), or leave information about relationships that they may have with other entities and activities (e.g., networks). Many of these phenomenologies are either not picked up by current stovepiped sensors, or the data supplied by those sensors are not fully exploited to properly observe them. In either case, new sensor data as well as the better exploitation of existing data could be used to provide, or at least cross cue or correlate with other sensor data to detect, identify, geolocate or track different kind of problems. Current sensors are often designed for specific purposes and are capable of sensing only limited parts of the spectrum. Significantly broadening the sensing spectrum will be an essential element of solving the emerging class of new "hard problems". There are many other observables available that could be exploited to assist in that process. Thus one could broaden the sensing to observe those phenomenologies associated with combustion effluents; thermal radiation; magnetic anomalies; seismic movement; acoustics; unintended electromagnetic emissions, changing weather conditions, logistics support indicators, debris trails; impressed observables (such as tagging); and others. What's needed is a disciplined, analytical process that can map observables to sensors, and ultimately to mission utility. The process, described in this SPIE presentation will address a specific example on the flow from the establishment of requirements to prosecutable observables, to objectives, to identification of sensors and assets, to the allocation of sensors and assets to observables, all based on optimizing mission utility.

  11. Integration of a Miniaturized Conductivity Sensor into an Animal-Borne Instrument

    Science.gov (United States)

    2013-09-30

    inductive sensors. However, there is a trade -off between size and accuracy. Decreasing size resuls in a decreased accuracy. In addition, by...modified for easy integration into the existing SRDL. The CT package will then be intergrated into the SRDL tested in the lab. After the successful

  12. Implementation of an Integrated, Portable Transformer Condition Monitoring Instrument in the Classroom and On-Site

    Science.gov (United States)

    Chatterjee, B.; Dey, D.; Chakravorti, S.

    2010-01-01

    The development of integrated, portable, transformer condition monitoring (TCM) equipment for classroom demonstrations as well as for student exercises conducted in the field is discussed. Demonstrations include experimentation with real-world transformers to illustrate concepts such as polarization and depolarization current through oil-paper…

  13. Intrasurgical Human Retinal Imaging With Manual Instrument Tracking Using a Microscope-Integrated Spectral-Domain Optical Coherence Tomography Device.

    Science.gov (United States)

    Hahn, Paul; Carrasco-Zevallos, Oscar; Cunefare, David; Migacz, Justin; Farsiu, Sina; Izatt, Joseph A; Toth, Cynthia A

    2015-07-01

    To characterize the first in-human intraoperative imaging using a custom prototype spectral-domain microscope-integrated optical coherence tomography (MIOCT) device during vitreoretinal surgery with instruments in the eye. Under institutional review board approval for a prospective intraoperative study, MIOCT images were obtained at surgical pauses with instruments held static in the vitreous cavity and then concurrently with surgical maneuvers. Postoperatively, MIOCT images obtained at surgical pauses were compared with images obtained with a high-resolution handheld spectral-domain OCT (HHOCT) system with objective endpoints, including acquisition of images acceptable for analysis and identification of predefined macular morphologic or pathologic features. Human MIOCT images were successfully obtained before incision and during pauses in surgical maneuvers. MIOCT imaging confirmed preoperative diagnoses, such as epiretinal membrane, full-thickness macular hole, and vitreomacular traction and demonstrated successful achievement of surgical goals. MIOCT and HHOCT images obtained at surgical pauses in two cohorts of five patients were comparable with greater than or equal to 80% correlation in 80% of patients. Real-time video-imaging concurrent with surgical manipulations enabled, for the first time using this device, visualization of dynamic instrument-retina interaction with targeted OCT tracking. MIOCT is successful for imaging at surgical pauses and for real-time image guidance with implementation of targeted OCT tracking. Even faster acquisition speeds are currently being developed with incorporation of a swept-source MIOCT engine. Further refinements and investigations will be directed toward continued integration for real-time volumetric imaging of surgical maneuvers. Ongoing development of seamless MIOCT systems will likely transform surgical visualization, approaches, and decision-making.

  14. Academic self-efficacy, growth mindsets, and university students' integration in academic and social support networks

    NARCIS (Netherlands)

    Zander, Lysann; Brouwer, Jasperina; Jansen, Ellen; Crayen, Claudia; Hannover, Bettina

    Combining complete social networks and structural equation modeling, we investigate how two learning-related cognitions, academic self-efficacy and growth mindsets, relate to integration in support networks of 580 university students in 30 seminar groups. We assessed integration as popularity in

  15. Integration of instrumentation and processing software of a laser speckle contrast imaging system

    Science.gov (United States)

    Carrick, Jacob J.

    Laser speckle contrast imaging (LSCI) has the potential to be a powerful tool in medicine, but more research in the field is required so it can be used properly. To help in the progression of Michigan Tech's research in the field, a graphical user interface (GUI) was designed in Matlab to control the instrumentation of the experiments as well as process the raw speckle images into contrast images while they are being acquired. The design of the system was successful and is currently being used by Michigan Tech's Biomedical Engineering department. This thesis describes the development of the LSCI GUI as well as offering a full introduction into the history, theory and applications of LSCI.

  16. Creation of integrated information model of 'Ukryttia' object premises condition to support the works

    International Nuclear Information System (INIS)

    Postil, S.D.; Ermolenko, A.I.; Ivanov, V.V.; Kotlyarov, V.T.

    2002-01-01

    A technology for creation of integrated information model of 'Ukryttia' Object premises conditions was developed on the basis of geoinformation system AutoCad. DB Access and instrumental utility 3D MAX. Information models and database for conditions of 'Ukryttia' object's premises located between 0.000 and 67.000 marks in axes 41-52, row G-T, were created. Using integrated information model of 'Ukryttia' object premises conditions, 3D surface distribution of radiation field in the object premises on level 0.000 has been received. It is revealed that maximum values of radiation field are concentrated over the clusters of fuel-containing materials

  17. Space Station Freedom environmental control and life support system phase 3 simplified integrated test detailed report

    Science.gov (United States)

    Roberts, B. C.; Carrasquillo, R. L.; Dubiel, M. Y.; Ogle, K. Y.; Perry, J. L.; Whitley, K. M.

    1990-01-01

    A description of the phase 3 simplified integrated test (SIT) conducted at the Marshall Space Flight Center (MSFC) Core Module Integration Facility (CMIF) in 1989 is presented. This was the first test in the phase 3 series integrated environmental control and life support systems (ECLSS) tests. The basic goal of the SIT was to achieve full integration of the baseline air revitalization (AR) subsystems for Space Station Freedom. Included is a description of the SIT configuration, a performance analysis of each subsystem, results from air and water sampling, and a discussion of lessons learned from the test. Also included is a full description of the preprototype ECLSS hardware used in the test.

  18. [Support of the nursing process through electronic nursing documentation systems (UEPD) – Initial validation of an instrument].

    Science.gov (United States)

    Hediger, Hannele; Müller-Staub, Maria; Petry, Heidi

    2016-01-01

    Electronic nursing documentation systems, with standardized nursing terminology, are IT-based systems for recording the nursing processes. These systems have the potential to improve the documentation of the nursing process and to support nurses in care delivery. This article describes the development and initial validation of an instrument (known by its German acronym UEPD) to measure the subjectively-perceived benefits of an electronic nursing documentation system in care delivery. The validity of the UEPD was examined by means of an evaluation study carried out in an acute care hospital (n = 94 nurses) in German-speaking Switzerland. Construct validity was analyzed by principal components analysis. Initial references of validity of the UEPD could be verified. The analysis showed a stable four factor model (FS = 0.89) scoring in 25 items. All factors loaded ≥ 0.50 and the scales demonstrated high internal consistency (Cronbach's α = 0.73 – 0.90). Principal component analysis revealed four dimensions of support: establishing nursing diagnosis and goals; recording a case history/an assessment and documenting the nursing process; implementation and evaluation as well as information exchange. Further testing with larger control samples and with different electronic documentation systems are needed. Another potential direction would be to employ the UEPD in a comparison of various electronic documentation systems.

  19. Characterization of Whole Grain Pasta: Integrating Physical, Chemical, Molecular, and Instrumental Sensory Approaches.

    Science.gov (United States)

    Marti, Alessandra; Cattaneo, Stefano; Benedetti, Simona; Buratti, Susanna; Abbasi Parizad, Parisa; Masotti, Fabio; Iametti, Stefania; Pagani, Maria Ambrogina

    2017-11-01

    The consumption of whole-grain food-including pasta-has been increasing steadily. In the case of whole-grain pasta, given the many different producers, it seems important to have some objective parameters to define its overall quality. In this study, commercial whole-grain pasta samples representative of the Italian market have been characterized from both molecular and electronic-senses (electronic nose and electronic tongue) standpoint in order to provide a survey of the properties of different commercial samples. Only 1 pasta product showed very low levels of heat damage markers (furosine and pyrraline), suggesting that this sample underwent to low temperature dry treatment. In all samples, the furosine content was directly correlated to protein structural indices, since protein structure compactness increased with increasing levels of heat damage markers. Electronic senses were able to discriminate among pasta samples according to the intensity of heat treatment during the drying step. Pasta sample with low furosine content was discriminated by umami taste and by sensors responding to aliphatic and inorganic compounds. Data obtained with this multidisciplinary approach are meant to provide hints for identifying useful indices for pasta quality. As observed for semolina pasta, objective parameters based on heat-damage were best suited to define the overall quality of wholegrain pasta, almost independently of compositional differences among commercial samples. Drying treatments of different intensity also had an impact on instrumental sensory traits that may provide a reliable alternative to analytical determination of chemical markers of heat damage in all cases where there is a need for avoiding time-consuming procedures. © 2017 Institute of Food Technologists®.

  20. Systems Engineering and Integration for Advanced Life Support System and HST

    Science.gov (United States)

    Kamarani, Ali K.

    2005-01-01

    Systems engineering (SE) discipline has revolutionized the way engineers and managers think about solving issues related to design of complex systems: With continued development of state-of-the-art technologies, systems are becoming more complex and therefore, a systematic approach is essential to control and manage their integrated design and development. This complexity is driven from integration issues. In this case, subsystems must interact with one another in order to achieve integration objectives, and also achieve the overall system's required performance. Systems engineering process addresses these issues at multiple levels. It is a technology and management process dedicated to controlling all aspects of system life cycle to assure integration at all levels. The Advanced Integration Matrix (AIM) project serves as the systems engineering and integration function for the Human Support Technology (HST) program. AIM provides means for integrated test facilities and personnel for performance trade studies, analyses, integrated models, test results, and validated requirements of the integration of HST. The goal of AIM is to address systems-level integration issues for exploration missions. It will use an incremental systems integration approach to yield technologies, baselines for further development, and possible breakthrough concepts in the areas of technological and organizational interfaces, total information flow, system wide controls, technical synergism, mission operations protocols and procedures, and human-machine interfaces.

  1. INTEGRAL EDUCATION AN INSTRUMENT FOR PREVENTION OF MENTAL SUFFERING AND PRESERVATION OF THE WORKER'S HEALTH

    Directory of Open Access Journals (Sweden)

    Maria do Socorro Burity Dialectaquiz

    2001-09-01

    Full Text Available

    En este artículo se enfoca la educación, la comunicación y las relaciones humanas como medios de prevención para la salud de los trabajadores, y como catalizadores para los cambios en el adulto. También se expone el análisis de principios de educación integral y autodescubrimiento, promocionando la acción de cambio, haciendo que el trabajador graduado tome conciencia de su conducta hacia él mismo y hacia otros trabajadores, lo que hace posible la reducción del sufrimiento mental.

  2. Application specific integrated circuit (ASIC) readout technologies for future ion beam analytical instruments

    Energy Technology Data Exchange (ETDEWEB)

    Whitlow, Harry J. E-mail: harry_j.whitlow@nuclear.lu.se

    2000-03-01

    New possibilities for ion beam analysis (IBA) are afforded by recent developments in detector technology which facilitate the parallel collection of data from a large number of channels. Application specific integrated circuit (ASIC) technologies, which have been widely employed for multi-channel readout systems in nuclear and particle physics, are more net-cost effective (160/channel for 1000 channels) and a more rational solution for readout of a large number of channels than afforded by conventional electronics. Based on results from existing and on-going chip designs, the possibilities and issues of ASIC readout technology are considered from the IBA viewpoint. Consideration is given to readout chip architecture and how the stringent resolution, linearity and stability requirements for IBA may be met. In addition the implications of the restrictions imposed by ASIC technology are discussed.

  3. Performance evaluation of eddy current transducers and associated instrumentation of integrated garter spring repositioning system

    International Nuclear Information System (INIS)

    Sharma, B.S.V.G.; Shyam, T.V.; Shrivastava, A.K.; Sinha, R.K.

    1997-01-01

    To extend the life of coolant channels of operating Indian Pressurised Heavy Water Reactors (PHWRs) of an early generation, repositioning of dislocated Garter Spring (GS) spacers is necessary. For this purpose a remotely operated system named INtegrated Garter spring REpositioning System (INGRES) has been developed. As a part of this system, eddy current transducers namely Garter Spring Detection Probe (GSDP) and Concentricity Detection Probe (CDP) along with respective signal processor units have been designed and developed. These devices detect GS spacers and eccentricity between Pressure Tube (PT) and Calandria Tube (CT) of the channel respectively. During a recent campaign of INGRES at Madras Atomic Power Station unit-2 (MAPS-2), these transducer systems have fulfilled intended design and operational objectives besides providing additional information regarding channel. These aspects are discussed. (author). 6 figs

  4. INTEGRAL EDUCATION AN INSTRUMENT FOR PREVENTION OF MENTAL SUFFERING AND PRESERVATION OF THE WORKER'S HEALTH

    Directory of Open Access Journals (Sweden)

    Claudiana Maria da Silva Leal

    2001-01-01

    Full Text Available

    En este artículo se enfoca la educación, la comunicación y las relaciones humanas como medios de prevención para la salud de los trabajadores, y como catalizadores para los cambios en el adulto. También se expone el análisis de principios de educación integral y autodescubrimiento, promocionando la acción de cambio, haciendo que el trabajador graduado tome conciencia de su conducta hacia él mismo y hacia otros trabajadores, lo que hace posible la reducción del sufrimiento mental.

  5. BUSINESS INTELLIGENCE APPLICATIONS – POSSIBLE INSTRUMENTS FOR ECONOMIC INTEGRATION WITHIN THE EASTERN PARTNERSHIP

    Directory of Open Access Journals (Sweden)

    Dragos Ovidiu TOFAN

    2016-10-01

    Full Text Available Eastern Partnership includes, in addition to bilateral components (Association Agreements, Deep and Comprehensive Free Trade Areas/DCFTA, also a multilateral dimension as "economic integration and convergence with EU policies". This stated purpose of the partnership involves the need for adaptability to regional conditions and a differentiated approach to economies in the region in order to establish common objectives. Partner countries have aspirations that vary by geographic location, state of relations with the European Union and Russia, foreign policy objectives in medium and long term, real prospects of joining the European Union, or internal stability in economic and social aspects. Macroeconomic indicators specific to each country must undergo a dynamic analysis aimed on current situations and also on evolution of economic life. Thus, it requires processing a huge volume of historical data, creating possible scenarios based on policies implemented or being implemented to reach comprehensive information to provide a realistic picture of the economic growth at the macro level. Successfully implemented in enterprises, Business Intelligence (BI applications can be used to analyze large volume of data required to be processed to reach full and useful reports for the process of negotiation between the partners involved in the agreements referred and, very importantly, to establish a common language for all bodies and institutions co-opted into negotiations. Differences between the EU and other Eastern Partnership countries are obvious but economic common terms and methods or techniques of similar work can help plan positive developments in the negotiations and the desired convergence of economic policies. Business Intelligence tools simplify the presentation of needed information for discussions and provide a foundation in starting up joint analysis of economic dynamics in the area to reach complete and actual lines of future possible

  6. Integrating Physical Actions and Financial Instruments to Manage Environmental Financial Risk

    Science.gov (United States)

    Foster, B.

    2016-12-01

    Exposure to extreme weather events can be reduced through physical actions (e.g., dams/reservoirs) or mitigated financially (e.g., insurance). Often physical actions involve investments in expensive infrastructure that reduce exposure, but whose benefits are only occasionally realized. Financial risk management does not reduce the impacts of an event, but rather redistributes them temporally, albeit at a cost. Nonetheless, these costs are typically much smaller, at least in the short run, than those incurred for physical actions. Financial strategies are also more flexible than physical ones in the face of an uncertain future. Financial contracts specifically designed to manage extreme environmental risks are becoming more common and can either replace or complement infrastructural investments as part of a risk management portfolio. In order to make optimal decisions as to the relative levels of physical and financial risk mitigation to employ, it is necessary to understand the relative merits of each strategy. This research develops a method for analyzing tradeoffs between physical and financial risk management strategies. We identify the unique cost and benefit properties of each strategy and integrate them into a single model that details the tradeoffs involved in various portfolios of physical and financial strategies. These methods are then applied to evaluate decisions to pursue emergency dredging during drought on the Mississippi River, which is used to mitigate the increased costs and/or reduced revenues barge operators face when water levels are low. Currently the U.S. Army Corps of Engineers funds most emergency dredging operations during major droughts and they are considering more intensive strategies for future droughts. Barge carriers and shippers though could manage at least some portion of their financial risks through a series of existing and experimental financial contracts. This work involves the formulation of these experimental contracts and

  7. P20 - the integrated system approach to nuclear control and instrumentation

    International Nuclear Information System (INIS)

    Jansen Van Rensburg, C.F.

    1990-01-01

    The P20 System is a data acquisition, control and monitoring system which has been jointly developed by Cegelec and Electricite de France. This system has been developed with the stringent requirements of a nuclear power generating facility in mind. The system has a hierarchical structure consisting of local area networks, supporting distributed plant interfaces, processing units and man-machine interfaces. The system offers exceptional availability and reliability through the implementation of extensive self-diagnostic techniques and multiple redundancy. This paper describes the system, the applied design techniques and the resulting benefits from using this design approach. 3 figs

  8. Fuel cracking in relation to fuel oxidation in support of an out-reactor instrumented defected fuel experiment

    Energy Technology Data Exchange (ETDEWEB)

    Quastel, A.; Thiriet, C. [Atomic Energy of Canada Limited, Chalk River, ON (Canada); Lewis, B., E-mail: brent.lewis@uoit.ca [Univ. of Ontario Inst. of Tech., Oshawa, ON (Canada); Corcoran, E., E-mail: emily.corcoran@rmc.ca [Royal Military College of Canada, Kingston, ON (Canada)

    2014-07-01

    An experimental program funded by the CANDU Owners Group (COG) is studying an out-reactor instrumented defected fuel experiment in Stern Laboratories (Hamilton, Ontario) with guidance from Atomic Energy of Canada Limited (AECL). The objective of this test is to provide experimental data for validation of a mechanistic fuel oxidation model. In this experiment a defected fuel element with UO{sub 2} pellets will be internally heated with an electrical heater element, causing the fuel to crack. By defecting the sheath in-situ the fuel will be exposed to light water coolant near normal reactor operating conditions (pressure 10 MPa and temperature 265-310{sup o}C) causing fuel oxidation, especially near the hotter regions of the fuel in the cracks. The fuel thermal conductivity will change, resulting in a change in the temperature distribution of the fuel element. This paper provides 2D r-θ plane strain solid mechanics models to simulate fuel thermal expansion, where conditions for fuel crack propagation are investigated with the thermal J integral to predict fuel crack stress intensity factors. Finally since fuel crack geometry can affect fuel oxidation this paper shows that the solid mechanics model with pre-set radial cracks can be coupled to a 2D r-θ fuel oxidation model. (author)

  9. Proscription supports robust perceptual integration by suppression in human visual cortex.

    Science.gov (United States)

    Rideaux, Reuben; Welchman, Andrew E

    2018-04-17

    Perception relies on integrating information within and between the senses, but how does the brain decide which pieces of information should be integrated and which kept separate? Here we demonstrate how proscription can be used to solve this problem: certain neurons respond best to unrealistic combinations of features to provide 'what not' information that drives suppression of unlikely perceptual interpretations. First, we present a model that captures both improved perception when signals are consistent (and thus should be integrated) and robust estimation when signals are conflicting. Second, we test for signatures of proscription in the human brain. We show that concentrations of inhibitory neurotransmitter GABA in a brain region intricately involved in integrating cues (V3B/KO) correlate with robust integration. Finally, we show that perturbing excitation/inhibition impairs integration. These results highlight the role of proscription in robust perception and demonstrate the functional purpose of 'what not' sensors in supporting sensory estimation.

  10. The Project Based Mechanisms of the Kyoto Protocol. Credible Instruments or Challenges to the Integrity of the Kyoto Protocol?

    Energy Technology Data Exchange (ETDEWEB)

    Takeuchi Waldegren, Linn

    2006-03-15

    The project based mechanisms of the Kyoto Protocol are innovative instruments which allow projects to earn credits for reducing greenhouse gas (GHG) emissions. The credits can in turn be used by countries to reach their emissions targets according to the Kyoto Protocol. The Project based mechanisms are known as the Clean Development Mechanism (CDM) and the Joint Implementation (JI). If the project based mechanisms are to be effective policy instruments they must ensure the integrity of the Kyoto Protocol, and their ability to promote and prove real emission reductions is critical. The environmental credibility of the project based mechanisms will also ensure their ability to promote cost effectiveness. Key concepts in this context are environmental and project additionality, and their role and value for the project based mechanisms are analyzed. Environmental additionality is established by comparing a project's emissions to a baseline. The baseline's credibility is thus vital. The concept of project additionality is somewhat controversial, but is nonetheless of equal importance. The case studies of CDM approved methodologies (AMs) and proposed projects suggest that there are credibility issues that need to be addressed if the project based mechanisms are to promote real emissions reductions.

  11. An integrated instrumental setup for the combination of atomic force microscopy with optical spectroscopy.

    Science.gov (United States)

    Owen, R J; Heyes, C D; Knebel, D; Röcker, C; Nienhaus, G U

    2006-07-01

    In recent years, the study of single biomolecules using fluorescence microscopy and atomic force microscopy (AFM) techniques has resulted in a plethora of new information regarding the physics underlying these complex biological systems. It is especially advantageous to be able to measure the optical, topographical, and mechanical properties of single molecules simultaneously. Here an AFM is used that is especially designed for integration with an inverted optical microscope and that has a near-infrared light source (850 nm) to eliminate interference between the optical experiment and the AFM operation. The Tip Assisted Optics (TAO) system consists of an additional 100 x 100-microm(2) X-Y scanner for the sample, which can be independently and simultaneously used with the AFM scanner. This allows the offset to be removed between the confocal optical image obtained with the sample scanner and the simultaneously acquired AFM topography image. The tip can be positioned exactly into the optical focus while the user can still navigate within the AFM image for imaging or manipulation of the sample. Thus the tip-enhancement effect can be maximized and it becomes possible to perform single molecule manipulation experiments within the focus of a confocal optical image. Here this is applied to simultaneous measurement of single quantum dot fluorescence and topography with high spatial resolution. (c) 2006 Wiley Periodicals, Inc.

  12. A variable stiffness mechanism for steerable percutaneous instruments: integration in a needle.

    Science.gov (United States)

    De Falco, Iris; Culmone, Costanza; Menciassi, Arianna; Dankelman, Jenny; van den Dobbelsteen, John J

    2018-06-04

    Needles are advanced tools commonly used in minimally invasive medical procedures. The accurate manoeuvrability of flexible needles through soft tissues is strongly determined by variations in tissue stiffness, which affects the needle-tissue interaction and thus causes needle deflection. This work presents a variable stiffness mechanism for percutaneous needles capable of compensating for variations in tissue stiffness and undesirable trajectory changes. It is composed of compliant segments and rigid plates alternately connected in series and longitudinally crossed by four cables. The tensioning of the cables allows the omnidirectional steering of the tip and the stiffness tuning of the needle. The mechanism was tested separately under different working conditions, demonstrating a capability to exert up to 3.6 N. Afterwards, the mechanism was integrated into a needle, and the overall device was tested in gelatine phantoms simulating the stiffness of biological tissues. The needle demonstrated the capability to vary deflection (from 11.6 to 4.4 mm) and adapt to the inhomogeneity of the phantoms (from 21 to 80 kPa) depending on the activation of the variable stiffness mechanism. Graphical abstract ᅟ.

  13. Introducing the Adults with Chronic Healthcare Needs (ACHCN) definition and screening instrument: Rationale, supporting evidence and testing.

    Science.gov (United States)

    Gulley, Stephen P; Rasch, Elizabeth K; Altman, Barbara M; Bethell, Christina D; Carle, Adam C; Druss, Benjamin G; Houtrow, Amy J; Reichard, Amanda; Chan, Leighton

    2018-04-01

    Among working age adults in the United States, there is a large, heterogeneous population that requires ongoing and elevated levels of healthcare and related services. At present, there are conflicting approaches to the definition and measurement of this population in health services research. An expert panel was convened by the National Institutes of Health with the objective of developing a population-level definition of Adults with Chronic Healthcare Needs (ACHCN). In addition, the panel developed a screening instrument and methods for its use in health surveys to identify and stratify the population consistently. The panel employed multiple methods over the course of the project, including scoping literature reviews, quantitative analyses from national data sources and cognitive testing. The panel defined the ACHCN population as "Adults (age 18-65) with [1] ongoing physical, cognitive, or mental health conditions or difficulties functioning who [2] need health or related support services of a type or amount beyond that needed by adults of the same sex and similar age." The screener collects information on chronic health conditions, functional difficulties, and elevated use of or unmet need for healthcare services. Adapted from the Maternal and Child Health Bureau definition that identifies Children with Special Healthcare Needs, aligned with the ACS-6 disability measure, and consistent with the HHS Multiple Chronic Condition Framework, this definition and screener provide the research community with a common denominator for the identification of ACHCN. Copyright © 2017 Elsevier Inc. All rights reserved.

  14. Integrated safeguards testing laboratories in support of the advanced fuel cycle initiative

    International Nuclear Information System (INIS)

    Santi, Peter A.; Demuth, Scott F.; Klasky, Kristen L.; Lee, Haeok; Miller, Michael C.; Sprinkle, James K.; Tobin, Stephen J.; Williams, Bradley

    2009-01-01

    A key enabler for advanced fuel cycle safeguards research and technology development for programs such as the Advanced Fuel Cycle Initiative (AFCI) is access to facilities and nuclear materials. This access is necessary in many cases in order to ensure that advanced safeguards techniques and technologies meet the measurement needs for which they were designed. One such crucial facility is a hot cell based laboratory which would allow developers from universities, national laboratories, and commercial companies to perform iterative research and development of advanced safeguards instrumentation under realistic operating conditions but not be subject to production schedule limitations. The need for such a facility arises from the requirement to accurately measure minor actinide and/or fission product bearing nuclear materials that cannot be adequately shielded in glove boxes. With the contraction of the DOE nuclear complex following the end of the cold war, many suitable facilities at DOE sites are increasingly costly to operate and are being evaluated for closure. A hot cell based laboratory that allowed developers to install and remove instrumentation from the hot cell would allow for both risk mitigation and performance optimization of the instrumentation prior to fielding equipment in facilities where maintenance and repair of the instrumentation is difficult or impossible. These benefits are accomplished by providing developers the opportunity to iterate between testing the performance of the instrumentation by measuring realistic types and amounts of nuclear material, and adjusting and refining the instrumentation based on the results of these measurements. In this paper, we review the requirements for such a facility using the Wing 9 hot cells in the Los Alamos National Laboratory's Chemistry and Metallurgy Research facility as a model for such a facility and describe recent use of these hot cells in support of AFCI.

  15. Integrated safeguards testing laboratories in support of the advanced fuel cycle initiative

    Energy Technology Data Exchange (ETDEWEB)

    Santi, Peter A [Los Alamos National Laboratory; Demuth, Scott F [Los Alamos National Laboratory; Klasky, Kristen L [Los Alamos National Laboratory; Lee, Haeok [Los Alamos National Laboratory; Miller, Michael C [Los Alamos National Laboratory; Sprinkle, James K [Los Alamos National Laboratory; Tobin, Stephen J [Los Alamos National Laboratory; Williams, Bradley [DOE, NE

    2009-01-01

    A key enabler for advanced fuel cycle safeguards research and technology development for programs such as the Advanced Fuel Cycle Initiative (AFCI) is access to facilities and nuclear materials. This access is necessary in many cases in order to ensure that advanced safeguards techniques and technologies meet the measurement needs for which they were designed. One such crucial facility is a hot cell based laboratory which would allow developers from universities, national laboratories, and commercial companies to perform iterative research and development of advanced safeguards instrumentation under realistic operating conditions but not be subject to production schedule limitations. The need for such a facility arises from the requirement to accurately measure minor actinide and/or fission product bearing nuclear materials that cannot be adequately shielded in glove boxes. With the contraction of the DOE nuclear complex following the end of the cold war, many suitable facilities at DOE sites are increasingly costly to operate and are being evaluated for closure. A hot cell based laboratory that allowed developers to install and remove instrumentation from the hot cell would allow for both risk mitigation and performance optimization of the instrumentation prior to fielding equipment in facilities where maintenance and repair of the instrumentation is difficult or impossible. These benefits are accomplished by providing developers the opportunity to iterate between testing the performance of the instrumentation by measuring realistic types and amounts of nuclear material, and adjusting and refining the instrumentation based on the results of these measurements. In this paper, we review the requirements for such a facility using the Wing 9 hot cells in the Los Alamos National Laboratory's Chemistry and Metallurgy Research facility as a model for such a facility and describe recent use of these hot cells in support of AFCI.

  16. Strategies for integrating mental health into schools via a multitiered system of support.

    Science.gov (United States)

    Stephan, Sharon Hoover; Sugai, George; Lever, Nancy; Connors, Elizabeth

    2015-04-01

    To fully realize the potential of mental health supports in academic settings, it is essential to consider how to effectively integrate the mental health and education systems and their respective resources, staffing, and structures. Historically, school mental health services have not effectively spanned a full continuum of care from mental health promotion to treatment, and several implementation and service challenges have evolved. After an overview of these challenges, best practices and strategies for school and community partners are reviewed to systematically integrate mental health interventions within a school's multitiered system of student support. Copyright © 2015 Elsevier Inc. All rights reserved.

  17. Auditing supports the integration of management systems in the nuclear industry

    International Nuclear Information System (INIS)

    Beckmerhagen, I.A.; Berg, H.P.; Karapetrovic, S.V.; Willborn, W.O.

    2004-01-01

    Integration of function-specific management systems in organizations is rapidly becoming a topic of interest for managers and auditors alike. This is mainly due to the proliferation of management system standards that foster compliance with the stated criteria for quality, environmental, occupational health and safety, social responsibility and other function-specific aspects of performance. While most of the available literature on this topic focuses on the integration of standards, there is comparatively little information available on how to actually build an integrated system internally. This paper hypothesizes that, besides using audits for the implementation of the available procedures, audits can provide an excellent basis for these integration efforts. Therefore the prerequisites, strategies and resources necessary for an effective audit in support of integrated management systems are discussed. The paper also describes how audits are used to improve a combined quality and safety management system at the repository of radioactive waste in Morsleben (Germany). (authors)

  18. Integration of a silicon-based microprobe into a gear measuring instrument for accurate measurement of micro gears

    International Nuclear Information System (INIS)

    Ferreira, N; Krah, T; Jeong, D C; Kniel, K; Härtig, F; Metz, D; Dietzel, A; Büttgenbach, S

    2014-01-01

    The integration of silicon micro probing systems into conventional gear measuring instruments (GMIs) allows fully automated measurements of external involute micro spur gears of normal modules smaller than 1 mm. This system, based on a silicon microprobe, has been developed and manufactured at the Institute for Microtechnology of the Technische Universität Braunschweig. The microprobe consists of a silicon sensor element and a stylus which is oriented perpendicularly to the sensor. The sensor is fabricated by means of silicon bulk micromachining. Its small dimensions of 6.5 mm × 6.5 mm allow compact mounting in a cartridge to facilitate the integration into a GMI. In this way, tactile measurements of 3D microstructures can be realized. To enable three-dimensional measurements with marginal forces, four Wheatstone bridges are built with diffused piezoresistors on the membrane of the sensor. On the reverse of the membrane, the stylus is glued perpendicularly to the sensor on a boss to transmit the probing forces to the sensor element during measurements. Sphere diameters smaller than 300 µm and shaft lengths of 5 mm as well as measurement forces from 10 µN enable the measurements of 3D microstructures. Such micro probing systems can be integrated into universal coordinate measuring machines and also into GMIs to extend their field of application. Practical measurements were carried out at the Physikalisch-Technische Bundesanstalt by qualifying the microprobes on a calibrated reference sphere to determine their sensitivity and their physical dimensions in volume. Following that, profile and helix measurements were carried out on a gear measurement standard with a module of 1 mm. The comparison of the measurements shows good agreement between the measurement values and the calibrated values. This result is a promising basis for the realization of smaller probe diameters for the tactile measurement of micro gears with smaller modules. (paper)

  19. On challenges and opportunities of designing integrated IT platforms for supporting knowledge works in organizations

    OpenAIRE

    Laha, Arijit

    2009-01-01

    Designing and implementing comprehensive IT-based support environments for KM in organizations is fraught with many problems. Solving them requires intimate knowledge about the information usage in knowledge works and the scopes of technology intervention. In this paper, the Task-oriented Organizational Knowledge Management or TOKM, a design theory for building integrated IT platforms for supporting organizational KM, is proposed. TOKM brings together two apparently mutually exclusive practic...

  20. Development of an integrated decision support system to aid cognitive activities of operators

    International Nuclear Information System (INIS)

    Lee, Seung Jun; Seong, Poong Hyun

    2007-01-01

    As digital and computer technologies have grown, Human-Machine Interfaces (HMIs) have evolved. In safety-critical systems, especially in Nuclear Power Plants (NPPs), HMIs are important for reducing operational costs, the number of necessary operators, and the probability of accident occurrence. Efforts have been made to improve Main Control Room (MCR) interface design and to develop automated or decision support systems to ensure convenient operation and maintenance. In this paper, an integrated decision support system to aid operator cognitive processes is proposed for advanced MCRs of future NPPs. This work suggests the design concept of a decision support system which accounts for an operator's cognitive processes. The proposed system supports not only a particular task, but also the entire operation process based on a human cognitive process model. In this paper, the operator's operation processes are analyzed according to a human cognitive process model and appropriate support systems that support each cognitive process activity are suggested

  1. Recycled material-based science instruments to support science education in rural area at Central Sulawesi District of Indonesia

    Science.gov (United States)

    Ali, M.; Supriyatman; Saehana, S.

    2018-03-01

    It has been successfully designing low cost of science experiment from recycled materials. The science instruments were produced to explain expansion concept and hydrostatic pressure inside the liquid. Science instruments were calibrated and then validated. It was also implemented in science learning.

  2. CALIPSO Borehole Instrumentation Project at Soufriere Hills Volcano, Montserrat, BWI: Data Acquisition, Telemetry, Integration, and Archival Systems

    Science.gov (United States)

    Mattioli, G. S.; Linde, A. T.; Sacks, I. S.; Malin, P. E.; Shalev, E.; Elsworth, D.; Hidayat, D.; Voight, B.; Young, S. R.; Dunkley, P. N.; Herd, R.; Norton, G.

    2003-12-01

    The CALIPSO Project (Caribbean Andesite Lava Island-volcano Precision Seismo-geodetic Observatory) has greatly enhanced the monitoring and scientific infrastructure at the Soufriere Hills Volcano, Montserrat with the recent installation of an integrated array of borehole and surface geophysical instrumentation at four sites. Each site was designed to be sufficiently hardened to withstand extreme meteorological events (e.g. hurricanes) and only require minimum routine maintenance over an expected observatory lifespan of >30 y. The sensor package at each site includes: a single-component, very broad band, Sacks-Evertson strainmeter, a three-component seismometer ( ˜Hz to 1 kHz), a Pinnacle Technologies series 5000 tiltmeter, and a surface Ashtech u-Z CGPS station with choke ring antenna, SCIGN mount and radome. This instrument package is similar to that envisioned by the Plate Boundary Observatory for deployment on EarthScope target volcanoes in western North America and thus the CALIPSO Project may be considered a prototype PBO installation with real field testing on a very active and dangerous volcano. Borehole sites were installed in series and data acquisition began immediately after the sensors were grouted into position at 200 m depth, with the first completed at Trants (5.8 km from dome) in 12-02, then Air Studios (5.2 km), Geralds (9.4 km), and Olveston (7.0 km) in 3-03. Analog data from the strainmeter (50 Hz sync) and seismometer (200 Hz) were initially digitized and locally archived using RefTek 72A-07 data acquisition systems (DAS) on loan from the PASSCAL instrument pool. Data were downloaded manually to a laptop approximately every month from initial installation until August 2003, when new systems were installed. Approximately 0.2 Tb of raw data in SEGY format have already been acquired and are currently archived at UARK for analysis by the CALIPSO science team. The July 12th dome collapse and vulcanian explosion events were recorded at 3 of the 4

  3. IAEA technical meeting on integrating analog and digital instrumentation and control systems in hybrid main control rooms at nuclear power plants. Book of abstracts

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    that digital technology offers are needed to increase cost-effective electricity production. As an integral part of the I and C modernization program at a nuclear power plant, the control room and other human-system interfaces (HSIs) will also be modernized. To support safe and effective operation, it is critical to specify, design, implement, operate, and maintain, as well as train for, the control room and HSI changes to take advantage of human cognitive processing abilities. This consideration of human factors is essential to increase performance and to reduce the likelihood of human errors. The plant I and C and HSI modifications can affect personnel in various ways. They can impact the role of personnel, the tasks to be performed, the way tasks are performed, and the knowledge, skills and training required of personnel. As part of modernization, HSIs are becoming more computer-based, incorporating features such as soft controls and computerized procedures, touch-screen interfaces, sit-down workstations, and large-screen overview displays. As computer-based technologies are integrated into control rooms that were largely based on conventional technology, hybrid control rooms are created. The potential benefits of implementing digital technology include more efficient operations and maintenance, leading to improved power plant availability and safety through the avoidance of transients, forced outages, and unnecessary shutdowns. The potential benefits also include increased efficiency and power output as well as reduced operating costs. New digital systems provide the opportunity to give personnel information they did not have with conventional systems. The importance of these issues has led the IAEA to organize (in conjunction with AECL) an international forum for presentations and discussions on the potential benefits and challenges related to the integration of Analog and Digital Instrumentation and Control Systems in Hybrid Main Control Rooms. Many of these

  4. IDESSA: An Integrative Decision Support System for Sustainable Rangeland Management in Southern African Savannas

    Science.gov (United States)

    Meyer, Hanna; Authmann, Christian; Dreber, Niels; Hess, Bastian; Kellner, Klaus; Morgenthal, Theunis; Nauss, Thomas; Seeger, Bernhard; Tsvuura, Zivanai; Wiegand, Kerstin

    2017-04-01

    Bush encroachment is a syndrome of land degradation that occurs in many savannas including those of southern Africa. The increase in density, cover or biomass of woody vegetation often has negative effects on a range of ecosystem functions and services, which are hardly reversible. However, despite its importance, neither the causes of bush encroachment, nor the consequences of different resource management strategies to combat or mitigate related shifts in savanna states are fully understood. The project "IDESSA" (An Integrative Decision Support System for Sustainable Rangeland Management in Southern African Savannas) aims to improve the understanding of the complex interplays between land use, climate patterns and vegetation dynamics and to implement an integrative monitoring and decision-support system for the sustainable management of different savanna types. For this purpose, IDESSA follows an innovative approach that integrates local knowledge, botanical surveys, remote-sensing and machine-learning based time-series of atmospheric and land-cover dynamics, spatially explicit simulation modeling and analytical database management. The integration of the heterogeneous data will be implemented in a user oriented database infrastructure and scientific workflow system. Accessible via web-based interfaces, this database and analysis system will allow scientists to manage and analyze monitoring data and scenario computations, as well as allow stakeholders (e. g. land users, policy makers) to retrieve current ecosystem information and seasonal outlooks. We present the concept of the project and show preliminary results of the realization steps towards the integrative savanna management and decision-support system.

  5. Integrated care reform in urban China: a qualitative study on design, supporting environment and implementation.

    Science.gov (United States)

    Qian, Yi; Hou, Zhiyuan; Wang, Wei; Zhang, Donglan; Yan, Fei

    2017-10-25

    Initiatives on integrated care between hospitals and community health centers (CHCs) have been introduced to transform the current fragmented health care delivery system into an integrated system in China. Up to date no research has analyzed in-depth the experiences of these initiatives based on perspectives from various stakeholders. This study analyzed the integrated care pilot in Hangzhou City by investigating stakeholders' perspectives on its design features and supporting environment, their acceptability of this pilot, and further identifying the enabling and constraining factors that may influence the implementation of the integrated care reform. The qualitative study was carried out based on in-depth interviews and focus group discussions with 50 key informants who were involved in the policy-making process and implementation. Relevant policy documents were also collected for analysis. The pilot in Hangzhou was established as a CHC-led delivery system based on cooperation agreement between CHCs and hospitals to deliver primary and specialty care together for patients with chronic diseases. An innovative learning-from-practice mentorship system between specialists and general practitioners was also introduced to solve the poor capacity of general practitioners. The design of the pilot, its governance and organizational structure and human resources were enabling factors, which facilitated the integrated care reform. However, the main constraining factors were a lack of an integrated payment mechanism from health insurance and a lack of tailored information system to ensure its sustainability. The integrated care pilot in Hangzhou enabled CHCs to play as gate-keeper and care coordinator for the full continuum of services across the health care providers. The government put integrated care a priority, and constructed an efficient design, governance and organizational structure to enable its implementation. Health insurance should play a proactive role, and

  6. Integrated logistic support analysis system; Sistema de analisis y gestion para el apoyo logistrico integrado

    Energy Technology Data Exchange (ETDEWEB)

    Carnicero Iniguez, E J; Garcia de la Sen, R. [Empresarios Agrupados, A.I.E., Madrid (Spain)

    1993-12-15

    Integrating logic support into a system results in a large volume of information having to be managed which can only be achieved with the help of computer applications. Both past experience and growing needs in such tasks have led Emperesarios Agrupados to undertake an ambitious development project which is described in this paper. (author)

  7. A Decision Support System for integrated tourism development: Rethinking tourism policies and management strategies

    Czech Academy of Sciences Publication Activity Database

    Bousset, J. P.; Skuras, D.; Těšitel, Jan; Marsat, J. B.; Petrou, A.; Fiallo-Pantziou, E.; Kušová, Drahomíra; Bartoš, Michael

    2007-01-01

    Roč. 9, č. 4 (2007), s. 387-404 ISSN 1461-6688 Grant - others:-(XE) QLK5-CT-2000-01211-SPRITE Institutional research plan: CEZ:AV0Z60870520 Keywords : Integrated tourism * policy formulation * participatory approaches * simulation models * decision support system Subject RIV: AE - Management ; Administration

  8. Gaby: a computer-based support system for integrated pest management in Dutch apple orchards

    NARCIS (Netherlands)

    Ende, van den E.; Blommers, L.; Trapman, M.

    1996-01-01

    In The Netherlands, a computerized advisory system (called Gaby) for integrated pest management (IPM) in apple has been developed to support the decision making of individual fruit growers. Gaby provides clear monitoring recommendations when this is appropriate for a particular pest in (a defined

  9. Virtual Ribosome - a comprehensive DNA translation tool with support for integration of sequence feature annotation

    DEFF Research Database (Denmark)

    Wernersson, Rasmus

    2006-01-01

    of alternative start codons. ( ii) Integration of sequences feature annotation - in particular, native support for working with files containing intron/ exon structure annotation. The software is available for both download and online use at http://www.cbs.dtu.dk/services/VirtualRibosome/....

  10. Work-Integrated Learning and the Importance of Peer Support and Sense of Belonging

    Science.gov (United States)

    McBeath, Margaret; Drysdale, Maureen T. B.; Bohn, Nicholas

    2018-01-01

    Purpose: The purpose of this paper is to explore the relationship between peer support and sense of belonging on the mental health and overall well-being, with a specific focus on comparing the perceptions of students in a work-integrated learning (WIL) program to those in a traditional non-WIL program. Design/methodology/approach: Semi-structured…

  11. Restorative Integral Support (RIS) for Older Adults Experiencing Co-Occurring Disorders

    Science.gov (United States)

    Larkin, Heather; MacFarland, Nicole S.

    2012-01-01

    The Restorative Integral Support (RIS) model is a whole person response that assists people to overcome adversity. The Adverse Childhood Experiences (ACE) Study conducted by Kaiser Permanente and the Centers for Disease Control and Prevention shows the association between stressors in childhood and multiple later-life health and social problems.…

  12. Integration and transformation of rural service delivery: The role of management information and decision support systems

    CSIR Research Space (South Africa)

    Mashiri, M

    2005-01-01

    Full Text Available The paper deals with two main themes: 1) the integration and transformation of rural service delivery; and 2) role of management information and decision support systems in this process. Referring specifically to the types of rural areas, conditions...

  13. Supportive care for older people with frailty in hospital: An integrative review.

    Science.gov (United States)

    Nicholson, Caroline; Morrow, Elizabeth M; Hicks, Allan; Fitzpatrick, Joanne

    2017-01-01

    Growing numbers of older people living with frailty and chronic health conditions are being referred to hospitals with acute care needs. Supportive care is a potentially highly relevant and clinically important approach which could bridge the practice gap between curative models of care and palliative care. However, future interventions need to be informed and underpinned by existing knowledge of supportive care. To identify and build upon existing theories and evidence about supportive care, specifically in relation to the hospital care of older people with frailty, to inform future interventions and their evaluation. An integrative review was used to identify and integrate theory and evidence. Electronic databases (Cochrane Medline, EMBASE and CIHAHL) were searched using the key term 'supportive care'. Screening identified studies employing qualitative and/or quantitative methods published between January 1990 and December 2015. Citation searches, reference checking and searches of the grey literature were also undertaken. Literature searches identified 2733 articles. After screening, and applying eligibility criteria based on relevance to the research question, studies were subject to methodological quality appraisal. Findings from included articles (n=52) were integrated using synthesis of themes. Relevant evidence was identified across different research literatures, on clinical conditions and contexts. Seven distinct themes of the synthesis were identified, these were: Ensuring fundamental aspects of care are met, Communicating and connecting with the patient, Carer and family engagement, Building up a picture of the person and their circumstances, Decisions and advice about best care for the person, Enabling self-help and connection to wider support, and Supporting patients through transitions in care. A tentative integrative model of supportive care for frail older people is developed from the findings. The findings and model developed here will inform

  14. A transdisciplinary approach for supporting the integration of ecosystem services into land and water management

    Science.gov (United States)

    Fatt Siew, Tuck; Döll, Petra

    2015-04-01

    Transdisciplinary approaches are useful for supporting integrated land and water management. However, the implementation of the approach in practice to facilitate the co-production of useable socio-hydrological (and -ecological) knowledge among scientists and stakeholders is challenging. It requires appropriate methods to bring individuals with diverse interests and needs together and to integrate their knowledge for generating shared perspectives/understanding, identifying common goals, and developing actionable management strategies. The approach and the methods need, particularly, to be adapted to the local political and socio-cultural conditions. To demonstrate how knowledge co-production and integration can be done in practice, we present a transdisciplinary approach which has been implemented and adapted for supporting land and water management that takes ecosystem services into account in an arid region in northwestern China. Our approach comprises three steps: (1) stakeholder analysis and interdisciplinary knowledge integration, (2) elicitation of perspectives of scientists and stakeholders, scenario development, and identification of management strategies, and (3) evaluation of knowledge integration and social learning. Our adapted approach has enabled interdisciplinary and cross-sectoral communication among scientists and stakeholders. Furthermore, the application of a combination of participatory methods, including actor modeling, Bayesian Network modeling, and participatory scenario development, has contributed to the integration of system, target, and transformation knowledge of involved stakeholders. The realization of identified management strategies is unknown because other important and representative decision makers have not been involved in the transdisciplinary research process. The contribution of our transdisciplinary approach to social learning still needs to be assessed.

  15. Supporting Fernald Site Closure with Integrated Health and Safety Plans as Documented Safety Analyses

    International Nuclear Information System (INIS)

    Kohler, S.; Brown, T.; Fisk, P.; Krach, F.; Klein, B.

    2004-01-01

    At the Fernald Closure Project (FCP) near Cincinnati, Ohio, environmental restoration activities are supported by Documented Safety Analyses (DSAs) that combine the required project-specific Health and Safety Plans, Safety Basis Requirements (SBRs), and Process Requirements (PRs) into single Integrated Health and Safety Plans (I-HASPs). These integrated DSAs employ Integrated Safety Management methodology in support of simplified restoration and remediation activities that, so far, have resulted in the decontamination and demolition (D and D) of over 200 structures, including eight major nuclear production plants. There is one of twelve nuclear facilities still remaining (Silos containing uranium ore residues) with its own safety basis documentation. This paper presents the status of the FCP's safety basis documentation program, illustrating that all of the former nuclear facilities and activities have now replaced. Basis of Interim Operations (BIOs) with I-HASPs as their safety basis during the closure process

  16. Advanced Satellite Workstation - An integrated workstation environment for operational support of satellite system planning and analysis

    Science.gov (United States)

    Hamilton, Marvin J.; Sutton, Stewart A.

    A prototype integrated environment, the Advanced Satellite Workstation (ASW), which was developed and delivered for evaluation and operator feedback in an operational satellite control center, is described. The current ASW hardware consists of a Sun Workstation and Macintosh II Workstation connected via an ethernet Network Hardware and Software, Laser Disk System, Optical Storage System, and Telemetry Data File Interface. The central objective of ASW is to provide an intelligent decision support and training environment for operator/analysis of complex systems such as satellites. Compared to the many recent workstation implementations that incorporate graphical telemetry displays and expert systems, ASW provides a considerably broader look at intelligent, integrated environments for decision support, based on the premise that the central features of such an environment are intelligent data access and integrated toolsets.

  17. Integrating complex business processes for knowledge-driven clinical decision support systems.

    Science.gov (United States)

    Kamaleswaran, Rishikesan; McGregor, Carolyn

    2012-01-01

    This paper presents in detail the component of the Complex Business Process for Stream Processing framework that is responsible for integrating complex business processes to enable knowledge-driven Clinical Decision Support System (CDSS) recommendations. CDSSs aid the clinician in supporting the care of patients by providing accurate data analysis and evidence-based recommendations. However, the incorporation of a dynamic knowledge-management system that supports the definition and enactment of complex business processes and real-time data streams has not been researched. In this paper we discuss the process web service as an innovative method of providing contextual information to a real-time data stream processing CDSS.

  18. The absence of conflict between paid-work hours and the provision of instrumental support to elderly parents among middle-aged women and men

    NARCIS (Netherlands)

    A.E. van Putten (Anne); J.D. Vlasblom (Jan Dirk); P.A. Dykstra (Pearl); J.J. Schippers (Joop)

    2010-01-01

    textabstractThis study assesses the relationship between the number of work hours and the provision of instrumental support to parents among 779 middle-aged women and men in dual-worker couples in The Netherlands. Using data from the Netherlands Kinship Panel Study collected during 2002-04, we

  19. Fostering development of nursing practices to support integrated care when implementing integrated care pathways: what levers to use?

    Science.gov (United States)

    Longpré, Caroline; Dubois, Carl-Ardy

    2017-11-29

    Care integration has been the focus of recent health system reforms. Given their functions at all levels of the care continuum, nurses have a substantial and primordial role to play in such integration processes. The aim of this study was to identify levers and strategies that organizations can use to support the development of a nursing practice aligned with the requirements of care integration in a health and social services centre (HSSC) in Quebec. The research design was a cross-sectional descriptive qualitative study based on a single case study with nested levels of analysis. The case was a public, multi-disciplinary HSSC in a semi-urban region of Quebec. Semi-structured interviews with 37 persons (nurses, professionals, managers, administrators) allowed for data saturation and ensured theoretical representation by covering four care pathways constituting different care integration contexts. Analysis involved four steps: preparing a predetermined list of codes based on the reference framework developed by Minkman (2011); coding transcript content; developing general and summary matrices to group observations for each care pathway; and creating a general model showing the overall results for the four pathways. The organization's capacity for response with regard to developing an integrated system of services resulted in two types of complementary interventions. The first involved investing in key resources and renewing organizational structures; the second involved deploying a series of organizational and clinical-administrative processes. In resource terms, integration efforts resulted in setting up new strategic services, re-arranging physical infrastructures, and deploying new technological resources. Organizational and clinical-administrative processes to promote integration involved renewing governance, improving the flow of care pathways, fostering continuous quality improvement, developing new roles, promoting clinician collaboration, and strengthening

  20. Integrated Logistics Support approach: concept for the new big projects: E-ELT, SKA, CTA

    Science.gov (United States)

    Marchiori, G.; Rampini, F.; Formentin, F.

    2014-08-01

    The Integrated Logistic Support is a process supporting strategies and optimizing activities for a correct project management and system engineering development. From the design & engineering of complex technical systems, to the erection on site, acceptance and after-sales service, EIE GROUP covers all aspects of the Integrated Logistics Support (ILS) process that includes: costing process centered around the life cycle cost and Level of Repair Analyses; engineering process which influences the design via means of reliability, modularization, etc.; technical publishing process based on international specifications; ordering administration process for supply support. Through the ILS, EIE GROUP plans and directs the identification and development of logistics support and system requirements for its products, with the goal of creating systems that last longer and require less support, thereby reducing costs and increasing return on investments. ILS therefore, addresses these aspects of supportability not only during acquisition, but also throughout the operational life cycle of the system. The impact of the ILS is often measured in terms of metrics such as reliability, availability, maintainability and testability (RAMT), and System Safety (RAMS). Example of the criteria and approach adopted by EIE GROUP during the design, manufacturing and test of the ALMA European Antennas and during the design phase of the E-ELT telescope and Dome are presented.

  1. Support structure concept for integration of ITER diagnostics in the port cell

    Energy Technology Data Exchange (ETDEWEB)

    Udintsev, V.S., E-mail: victor.udintsev@iter.org [ITER Organization, Route de Vinon sur Verdon, 13115 St. Paul-Lez-Durance (France); Portalès, M.; Giacomin, T.; Darcourt, O.; Direz, M.-F.; Martins, J.P.; Penot, C.; Arumugam, A.P.; Drevon, J.-M.; Friconneau, J.P.; Levesy, B.; Maquet, P.; Patel, K.M.; Pitcher, C.S. [ITER Organization, Route de Vinon sur Verdon, 13115 St. Paul-Lez-Durance (France); Popova, E. [Russian Federation Domestic Agency, Moscow (Russian Federation); Proust, M. [ITER Organization, Route de Vinon sur Verdon, 13115 St. Paul-Lez-Durance (France); Ronden, D.M.S. [DIFFER, Nieuwegein (Netherlands); Walker, C.I.; Walsh, M.J.; Watts, C. [ITER Organization, Route de Vinon sur Verdon, 13115 St. Paul-Lez-Durance (France)

    2013-10-15

    Highlights: ► An interspace support structure to support the diagnostic systems from the back of the upper and equatorial port plugs to the biological shield plug. ► Port cell support structures are foreseen to handle the equipment in the port cell. ► Both ISS and PCSS will be supported by means of RH rail system. ► The structures will be positioned with a certain tolerance. ► The proposed concepts are found to fulfil the needs for support of the diagnostics in ITER. -- Abstract: Development of the diagnostics for ITER tokamak, which is presently under construction by several international partners at Cadarache in France, is a major challenge because of severe environment, strict engineering requirements, and the need for high reliability in the measurements. The diagnostic systems in the upper, equatorial and lower port cells on ITER are designed to be integrated within the interspace and port cell support structures. These structures are interfacing with remote handling rail system for the cask operations, thus facilitating the removal and installation of the diagnostics in the port and hence minimizing time for working close to the tokamak. In this paper, the challenges associated with the integration of the diagnostics in the port interspace and port cell, as well as their solutions will be addressed and presented. The interspace and the port cell support structures, as well as their interfaces with the biological shield, will be discussed.

  2. P185-M Protein Identification and Validation of Results in Workflows that Integrate over Various Instruments, Datasets, Search Engines

    Science.gov (United States)

    Hufnagel, P.; Glandorf, J.; Körting, G.; Jabs, W.; Schweiger-Hufnagel, U.; Hahner, S.; Lubeck, M.; Suckau, D.

    2007-01-01

    Analysis of complex proteomes often results in long protein lists, but falls short in measuring the validity of identification and quantification results on a greater number of proteins. Biological and technical replicates are mandatory, as is the combination of the MS data from various workflows (gels, 1D-LC, 2D-LC), instruments (TOF/TOF, trap, qTOF or FTMS), and search engines. We describe a database-driven study that combines two workflows, two mass spectrometers, and four search engines with protein identification following a decoy database strategy. The sample was a tryptically digested lysate (10,000 cells) of a human colorectal cancer cell line. Data from two LC-MALDI-TOF/TOF runs and a 2D-LC-ESI-trap run using capillary and nano-LC columns were submitted to the proteomics software platform ProteinScape. The combined MALDI data and the ESI data were searched using Mascot (Matrix Science), Phenyx (GeneBio), ProteinSolver (Bruker and Protagen), and Sequest (Thermo) against a decoy database generated from IPI-human in order to obtain one protein list across all workflows and search engines at a defined maximum false-positive rate of 5%. ProteinScape combined the data to one LC-MALDI and one LC-ESI dataset. The initial separate searches from the two combined datasets generated eight independent peptide lists. These were compiled into an integrated protein list using the ProteinExtractor algorithm. An initial evaluation of the generated data led to the identification of approximately 1200 proteins. Result integration on a peptide level allowed discrimination of protein isoforms that would not have been possible with a mere combination of protein lists.

  3. Digital Technologies Supporting Person-Centered Integrated Care – A Perspective

    Science.gov (United States)

    2017-01-01

    Shared electronic health and social care records in some service systems are already showing some of the benefits of digital technology and digital data for integrating health and social care. These records are one example of the beginning “digitalisation” of services that gives a glimpse of the potential of digital technology and systems for building coordinated and individualized integrated care. Yet the promise has been greater than the benefits, and progress has been slow compared to other industries. This paper describes for non-technical readers how information technology was used to support integrated care schemes in six EU services, and suggests practical ways forward to use the new opportunities to build person-centered integrated care. PMID:29588629

  4. Digital Technologies Supporting Person-Centered Integrated Care – A Perspective

    Directory of Open Access Journals (Sweden)

    John Øvretveit

    2017-09-01

    Full Text Available Shared electronic health and social care records in some service systems are already showing some of the benefits of digital technology and digital data for integrating health and social care. These records are one example of the beginning “digitalisation” of services that gives a glimpse of the potential of digital technology and systems for building coordinated and individualized integrated care. Yet the promise has been greater than the benefits, and progress has been slow compared to other industries. This paper describes for non-technical readers how information technology was used to support integrated care schemes in six EU services, and suggests practical ways forward to use the new opportunities to build person-centered integrated care.

  5. Quality of life and mental health among women with ovarian cancer: examining the role of emotional and instrumental social support seeking.

    Science.gov (United States)

    Hill, Erin M

    2016-07-01

    The purpose of the present study was to examine the role of emotional and instrumental social support seeking in the quality of life (QOL) and mental health of women with ovarian cancer. Participants were recruited through the Pennsylvania Cancer Registry, and one hundred women took part in a mail questionnaire that collected information on their demographics, medical status, social support seeking, QOL and mental health including anxiety, depression and stress. Hierarchical linear regression analyses were conducted to assess the influence of emotional and instrumental social support seeking on QOL and mental health. After controlling for remission status, greater emotional social support seeking was predictive of higher overall QOL, social/family QOL, functional QOL and lower depression scores. Instrumental social support seeking was not significant in the models. The results illustrate that social support seeking as a coping mechanism is an important consideration in the QOL and mental health of women with ovarian cancer. Future studies should examine the psychological and behavioral mediators of the relationship to further understand the QOL and mental health of women with ovarian cancer.

  6. Developing an effective adaptive monitoring network to support integrated coastal management in a multiuser nature reserve

    Directory of Open Access Journals (Sweden)

    Pim Vugteveen

    2015-03-01

    Full Text Available We elaborate the necessary conceptual and strategic elements for developing an effective adaptive monitoring network to support Integrated Coastal Management (ICM in a multiuser nature reserve in the Dutch Wadden Sea Region. We discuss quality criteria and enabling actions essential to accomplish and sustain monitoring excellence to support ICM. The Wadden Sea Long-Term Ecosystem Research project (WaLTER was initiated to develop an adaptive monitoring network and online data portal to better understand and support ICM in the Dutch Wadden Sea Region. Our comprehensive approach integrates ecological and socioeconomic data and links research-driven and policy-driven monitoring for system analysis using indicators of pressures, state, benefits, and responses. The approach and concepts we elaborated are transferable to other coastal regions to accomplish ICM in complex social-ecological systems in which scientists, multisectoral stakeholders, resource managers, and governmental representatives seek to balance long-term ecological, economic, and social objectives within natural limits.

  7. Social support and social interaction ties on internet addiction: integrating online and offline contexts.

    Science.gov (United States)

    Wang, Edward Shih-Tse; Wang, Michael Chih-Hung

    2013-11-01

    This study explores the relationship between social support and social interaction ties on Internet addiction by integrating both online and offline social encounters. A total of 1,642 members of online social communities participated in this research, for which structural equation modeling was used for analysis. The findings show that social support is positively associated with social interaction ties in both online and offline contexts. In addition, online social support and online social interaction ties are positively associated with Internet addiction, whereas offline social support and social interaction ties on Internet addiction are negatively associated. This finding has important implications not only for understanding the cause of Internet addiction but also for understanding the diminishing Internet addiction due to social support and social interaction ties.

  8. Instrumentation and signal processing for the detection of heavy water using off axis-integrated cavity output spectroscopy technique

    Science.gov (United States)

    Gupta, A.; Singh, P. J.; Gaikwad, D. Y.; Udupa, D. V.; Topkar, A.; Sahoo, N. K.

    2018-02-01

    An experimental setup is developed for the trace level detection of heavy water (HDO) using the off axis-integrated cavity output spectroscopy technique. The absorption spectrum of water samples is recorded in the spectral range of 7190.7 cm-1-7191.5 cm-1 with the diode laser as the light source. From the recorded water vapor absorption spectrum, the heavy water concentration is determined from the HDO and water line. The effect of cavity gain nonlinearity with per pass absorption is studied. The signal processing and data fitting procedure is devised to obtain linear calibration curves by including nonlinear cavity gain effects into the calculation. Initial calibration of mirror reflectivity is performed by measurements on the natural water sample. The signal processing and data fitting method has been validated by the measurement of the HDO concentration in water samples over a wide range from 20 ppm to 2280 ppm showing a linear calibration curve. The average measurement time is about 30 s. The experimental technique presented in this paper could be applied for the development of a portable instrument for the fast measurement of water isotopic composition in heavy water plants and for the detection of heavy water leak in pressurized heavy water reactors.

  9. Toward the integration of expert knowledge and instrumental data to control food processes: application to Camembert-type cheese ripening.

    Science.gov (United States)

    Sicard, M; Perrot, N; Leclercq-Perlat, M-N; Baudrit, C; Corrieu, G

    2011-01-01

    Modeling the cheese ripening process remains a challenge because of its complexity. We still lack the knowledge necessary to understand the interactions that take place at different levels of scale during the process. However, information may be gathered from expert knowledge. Combining this expertise with knowledge extracted from experimental databases may allow a better understanding of the entire ripening process. The aim of this study was to elicit expert knowledge and to check its validity to assess the evolution of organoleptic quality during a dynamic food process: Camembert cheese ripening. Experiments on a pilot scale were carried out at different temperatures and relative humidities to obtain contrasting ripening kinetics. During these experiments, macroscopic evolution was evaluated from an expert's point of view and instrumental measurements were carried out to simultaneously monitor microbiological, physicochemical, and biochemical kinetics. A correlation of 76% was established between the microbiological, physicochemical, and biochemical data and the sensory phases measured according to expert knowledge, highlighting the validity of the experts' measurements. In the future, it is hoped that this expert knowledge may be integrated into food process models to build better decision-aid systems that will make it possible to preserve organoleptic qualities by linking them to other phenomena at the microscopic level. Copyright © 2011 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  10. Neural networks supporting audiovisual integration for speech: A large-scale lesion study.

    Science.gov (United States)

    Hickok, Gregory; Rogalsky, Corianne; Matchin, William; Basilakos, Alexandra; Cai, Julia; Pillay, Sara; Ferrill, Michelle; Mickelsen, Soren; Anderson, Steven W; Love, Tracy; Binder, Jeffrey; Fridriksson, Julius

    2018-06-01

    Auditory and visual speech information are often strongly integrated resulting in perceptual enhancements for audiovisual (AV) speech over audio alone and sometimes yielding compelling illusory fusion percepts when AV cues are mismatched, the McGurk-MacDonald effect. Previous research has identified three candidate regions thought to be critical for AV speech integration: the posterior superior temporal sulcus (STS), early auditory cortex, and the posterior inferior frontal gyrus. We assess the causal involvement of these regions (and others) in the first large-scale (N = 100) lesion-based study of AV speech integration. Two primary findings emerged. First, behavioral performance and lesion maps for AV enhancement and illusory fusion measures indicate that classic metrics of AV speech integration are not necessarily measuring the same process. Second, lesions involving superior temporal auditory, lateral occipital visual, and multisensory zones in the STS are the most disruptive to AV speech integration. Further, when AV speech integration fails, the nature of the failure-auditory vs visual capture-can be predicted from the location of the lesions. These findings show that AV speech processing is supported by unimodal auditory and visual cortices as well as multimodal regions such as the STS at their boundary. Motor related frontal regions do not appear to play a role in AV speech integration. Copyright © 2018 Elsevier Ltd. All rights reserved.

  11. Investigating Pre-Service Early Childhood Teachers' Views and Intentions about Integrating and Using Computers in Early Childhood Settings: Compilation of an Instrument

    Science.gov (United States)

    Nikolopoulou, Kleopatra; Gialamas, Vasilis

    2009-01-01

    This paper discusses the compilation of an instrument in order to investigate pre-service early childhood teachers' views and intentions about integrating and using computers in early childhood settings. For the purpose of this study a questionnaire was compiled and administered to 258 pre-service early childhood teachers (PECTs), in Greece. A…

  12. Position of the American Dietetic Association: local support for nutrition integrity in schools.

    Science.gov (United States)

    Bergman, Ethan A; Gordon, Ruth W

    2010-08-01

    It is the position of the American Dietetic Association (ADA) that schools and communities have a shared responsibility to provide students with access to high-quality, affordable, nutritious foods and beverages. School-based nutrition services, including the provision of meals through the National School Lunch Program and the School Breakfast Program, are an integral part of the total education program. Strong wellness policies promote environments that enhance nutrition integrity and help students to develop lifelong healthy behaviors. ADA actively supported the 2004 and proposed 2010 Child Nutrition reauthorization which determines school nutrition policy. ADA believes that the Dietary Guidelines for Americans should serve as the foundation for all food and nutrition assistance programs and should apply to all foods and beverages sold or served to students during the school day. Local wellness policies are mandated by federal legislation for all school districts participating in the National School Lunch Program. These policies support nutrition integrity,including a healthy school environment. Nutrition integrity also requires coordinating nutrition education and promotion and funding research on program outcomes. Registered dietitians and dietetic technicians, registered, and other credentialed staff, are essential for nutrition integrity in schools to perform in policy-making, management, education, and community building roles. A healthy school environment can be achieved through adequate funding of school meals programs and through implementation and evaluation of strong local wellness policies.

  13. Memory integration in amnesia: prior knowledge supports verbal short-term memory.

    Science.gov (United States)

    Race, Elizabeth; Palombo, Daniela J; Cadden, Margaret; Burke, Keely; Verfaellie, Mieke

    2015-04-01

    Short-term memory (STM) and long-term memory (LTM) have traditionally been considered cognitively distinct. However, it is known that STM can improve when to-be-remembered information appears in contexts that make contact with prior knowledge, suggesting a more interactive relationship between STM and LTM. The current study investigated whether the ability to leverage LTM in support of STM critically depends on the integrity of the hippocampus. Specifically, we investigated whether the hippocampus differentially supports between-domain versus within-domain STM-LTM integration given prior evidence that the representational domain of the elements being integrated in memory is a critical determinant of whether memory performance depends on the hippocampus. In Experiment 1, we investigated hippocampal contributions to within-domain STM-LTM integration by testing whether immediate verbal recall of words improves in MTL amnesic patients when words are presented in familiar verbal contexts (meaningful sentences) compared to unfamiliar verbal contexts (random word lists). Patients demonstrated a robust sentence superiority effect, whereby verbal STM performance improved in familiar compared to unfamiliar verbal contexts, and the magnitude of this effect did not differ from that in controls. In Experiment 2, we investigated hippocampal contributions to between-domain STM-LTM integration by testing whether immediate verbal recall of digits improves in MTL amnesic patients when digits are presented in a familiar visuospatial context (a typical keypad layout) compared to an unfamiliar visuospatial context (a random keypad layout). Immediate verbal recall improved in both patients and controls when digits were presented in the familiar compared to the unfamiliar keypad array, indicating a preserved ability to integrate activated verbal information with stored visuospatial knowledge. Together, these results demonstrate that immediate verbal recall in amnesia can benefit from two

  14. Alaska Center for Unmanned Aircraft Systems Integration (ACUASI): Operational Support and Geoscience Research

    Science.gov (United States)

    Webley, P. W.; Cahill, C. F.; Rogers, M.; Hatfield, M. C.

    2016-12-01

    Unmanned Aircraft Systems (UAS) have enormous potential for use in geoscience research and supporting operational needs from natural hazard assessment to the mitigation of critical infrastructure failure. They provide a new tool for universities, local, state, federal, and military organizations to collect new measurements not readily available from other sensors. We will present on the UAS capabilities and research of the Alaska Center for Unmanned Aircraft Systems Integration (ACUASI, http://acuasi.alaska.edu/). Our UAS range from the Responder with its dual visible/infrared payload that can provide simultaneous data to our new SeaHunter UAS with 90 lb. payload and multiple hour flight time. ACUASI, as a designated US Federal Aviation Administration (FAA) test center, works closely with the FAA on integrating UAS into the national airspace. ACUASI covers all aspects of working with UAS from pilot training, airspace navigation, flight operations, and remote sensing analysis to payload design and integration engineers and policy experts. ACUASI's recent missions range from supporting the mapping of sea ice cover for safe passage of Alaskans across the hazardous winter ice to demonstrating how UAS can be used to provide support during oil spill response. Additionally, we will present on how ACUASI has worked with local authorities in Alaska to integrate UAS into search and rescue operations and with NASA and the FAA on their UAS Transport Management (UTM) project to fly UAS within the manned airspace. ACUASI is also working on developing new capabilities to sample volcanic plumes and clouds, map forest fire impacts and burn areas, and develop a new citizen network for monitoring snow extent and depth during Northern Hemisphere winters. We will demonstrate how UAS can be integrated in operational support systems and at the same time be used in geoscience research projects to provide high precision, accurate, and reliable observations.

  15. Risk implications of renewable support instruments: Comparative analysis of feed-in tariffs and premiums using a mean–variance approach

    International Nuclear Information System (INIS)

    Kitzing, Lena

    2014-01-01

    Different support instruments for renewable energy expose investors differently to market risks. This has implications on the attractiveness of investment. We use mean–variance portfolio analysis to identify the risk implications of two support instruments: feed-in tariffs and feed-in premiums. Using cash flow analysis, Monte Carlo simulations and mean–variance analysis, we quantify risk-return relationships for an exemplary offshore wind park in a simplified setting. We show that feed-in tariffs systematically require lower direct support levels than feed-in premiums while providing the same attractiveness for investment, because they expose investors to less market risk. These risk implications should be considered when designing policy schemes. - Highlights: • Mean–variance portfolio approach to analyse risk implications of policy instruments. • We show that feed-in tariffs require lower support levels than feed-in premiums. • This systematic effect stems from the lower exposure of investors to market risk. • We created a stochastic model for an exemplary offshore wind park in West Denmark. • We quantify risk-return, Sharpe Ratios and differences in required support levels

  16. Collaborative agency to support integrated care for children, young people and families: an action research study

    Directory of Open Access Journals (Sweden)

    Karen Stuart

    2014-05-01

    Full Text Available Introduction: Collaboration was legislated in the delivery of integrated care in the early 2000s in the UK. This research explored how the reality of practice met the rhetoric of collaboration.Theory: The paper is situated against a theoretical framework of structure, agency, identity and empowerment. Collectively and contextually these concepts inform the proposed model of ‘collaborative agency’ to sustain integrated care. The paper brings sociological theory on structure and agency to the dilemma of collaboration.Methods: Participative action research was carried out in collaborative teams that aspired to achieve integrated care for children, young people and families between 2009 and 2013. It was a part time, PhD study in collaborative practice.Results: The research established that people needed to be able to be jointly aware of their context, to make joint decisions, and jointly act in order to deliver integrated services, and proposes a model of collaborative agency derived from practitioner’s experiences and integrated action research and literature on agency. The model reflects the effects of a range of structures in shaping professional identity, empowerment, and agency in a dynamic. The author proposes that the collaborative agency model will support integrated care, although this is, as yet, an untested hypothesis.

  17. Collaborative agency to support integrated care for children, young people and families: an action research study

    Directory of Open Access Journals (Sweden)

    Karen Stuart

    2014-05-01

    Full Text Available Introduction: Collaboration was legislated in the delivery of integrated care in the early 2000s in the UK. This research explored how the reality of practice met the rhetoric of collaboration. Theory: The paper is situated against a theoretical framework of structure, agency, identity and empowerment. Collectively and contextually these concepts inform the proposed model of ‘collaborative agency’ to sustain integrated care. The paper brings sociological theory on structure and agency to the dilemma of collaboration. Methods: Participative action research was carried out in collaborative teams that aspired to achieve integrated care for children, young people and families between 2009 and 2013. It was a part time, PhD study in collaborative practice. Results: The research established that people needed to be able to be jointly aware of their context, to make joint decisions, and jointly act in order to deliver integrated services, and proposes a model of collaborative agency derived from practitioner’s experiences and integrated action research and literature on agency. The model reflects the effects of a range of structures in shaping professional identity, empowerment, and agency in a dynamic. The author proposes that the collaborative agency model will support integrated care, although this is, as yet, an untested hypothesis.

  18. Integration of Multisensor Hybrid Reasoners to Support Personal Autonomy in the Smart Home

    Directory of Open Access Journals (Sweden)

    Miguel Ángel Valero

    2014-09-01

    Full Text Available The deployment of the Ambient Intelligence (AmI paradigm requires designing and integrating user-centered smart environments to assist people in their daily life activities. This research paper details an integration and validation of multiple heterogeneous sensors with hybrid reasoners that support decision making in order to monitor personal and environmental data at a smart home in a private way. The results innovate on knowledge-based platforms, distributed sensors, connected objects, accessibility and authentication methods to promote independent living for elderly people. TALISMAN+, the AmI framework deployed, integrates four subsystems in the smart home: (i a mobile biomedical telemonitoring platform to provide elderly patients with continuous disease management; (ii an integration middleware that allows context capture from heterogeneous sensors to program environment´s reaction; (iii a vision system for intelligent monitoring of daily activities in the home; and (iv an ontologies-based integrated reasoning platform to trigger local actions and manage private information in the smart home. The framework was integrated in two real running environments, the UPM Accessible Digital Home and MetalTIC house, and successfully validated by five experts in home care, elderly people and personal autonomy.

  19. Integration of multisensor hybrid reasoners to support personal autonomy in the smart home.

    Science.gov (United States)

    Valero, Miguel Ángel; Bravo, José; Chamizo, Juan Manuel García; López-de-Ipiña, Diego

    2014-09-17

    The deployment of the Ambient Intelligence (AmI) paradigm requires designing and integrating user-centered smart environments to assist people in their daily life activities. This research paper details an integration and validation of multiple heterogeneous sensors with hybrid reasoners that support decision making in order to monitor personal and environmental data at a smart home in a private way. The results innovate on knowledge-based platforms, distributed sensors, connected objects, accessibility and authentication methods to promote independent living for elderly people. TALISMAN+, the AmI framework deployed, integrates four subsystems in the smart home: (i) a mobile biomedical telemonitoring platform to provide elderly patients with continuous disease management; (ii) an integration middleware that allows context capture from heterogeneous sensors to program environment's reaction; (iii) a vision system for intelligent monitoring of daily activities in the home; and (iv) an ontologies-based integrated reasoning platform to trigger local actions and manage private information in the smart home. The framework was integrated in two real running environments, the UPM Accessible Digital Home and MetalTIC house, and successfully validated by five experts in home care, elderly people and personal autonomy.

  20. Integration of Multisensor Hybrid Reasoners to Support Personal Autonomy in the Smart Home

    Science.gov (United States)

    Valero, Miguel Ángel; Bravo, José; Chamizo, Juan Manuel García; López-de-Ipiña, Diego

    2014-01-01

    The deployment of the Ambient Intelligence (AmI) paradigm requires designing and integrating user-centered smart environments to assist people in their daily life activities. This research paper details an integration and validation of multiple heterogeneous sensors with hybrid reasoners that support decision making in order to monitor personal and environmental data at a smart home in a private way. The results innovate on knowledge-based platforms, distributed sensors, connected objects, accessibility and authentication methods to promote independent living for elderly people. TALISMAN+, the AmI framework deployed, integrates four subsystems in the smart home: (i) a mobile biomedical telemonitoring platform to provide elderly patients with continuous disease management; (ii) an integration middleware that allows context capture from heterogeneous sensors to program environment's reaction; (iii) a vision system for intelligent monitoring of daily activities in the home; and (iv) an ontologies-based integrated reasoning platform to trigger local actions and manage private information in the smart home. The framework was integrated in two real running environments, the UPM Accessible Digital Home and MetalTIC house, and successfully validated by five experts in home care, elderly people and personal autonomy. PMID:25232910

  1. Collaborative agency to support integrated care for children, young people and families: an action research study.

    Science.gov (United States)

    Stuart, Kaz

    2014-04-01

    Collaboration was legislated in the delivery of integrated care in the early 2000s in the UK. This research explored how the reality of practice met the rhetoric of collaboration. The paper is situated against a theoretical framework of structure, agency, identity and empowerment. Collectively and contextually these concepts inform the proposed model of 'collaborative agency' to sustain integrated care. The paper brings sociological theory on structure and agency to the dilemma of collaboration. Participative action research was carried out in collaborative teams that aspired to achieve integrated care for children, young people and families between 2009 and 2013. It was a part time, PhD study in collaborative practice. The research established that people needed to be able to be jointly aware of their context, to make joint decisions, and jointly act in order to deliver integrated services, and proposes a model of collaborative agency derived from practitioner's experiences and integrated action research and literature on agency. The model reflects the effects of a range of structures in shaping professional identity, empowerment, and agency in a dynamic. The author proposes that the collaborative agency model will support integrated care, although this is, as yet, an untested hypothesis.

  2. Determining the climate impact of the German government's Integrated Energy and Climate Programme (IEKP) and proposing a plan to continuously monitor its climate impact. Work package 1. Qualitative assessment of the instruments in an Integrated Energy and Climate Programme (IEKP); Ermittlung der Klimaschutzwirkung des Integrierten Energie- und Klimaschutzprogramms der Bundesregierung IEKP und Vorschlag fuer ein Konzept zur kontinuierlichen Ueberpruefung der Klimaschutzwirkung des IEKP. Arbeitspaket 1. Qualitative Einschaetzung der Instrumente im Integrierten Energie- und Klimaschutzprogramm (IEKP)

    Energy Technology Data Exchange (ETDEWEB)

    Doll, Claus; Eichhammer, Wolfgang; Fleiter, Tobias [Fraunhofer-Institut fuer System- und Innovationsforschung, Karlsruhe (DE)] (and others)

    2012-02-15

    In August 2007, the key elements for an integrated energy and climate program (IECP) were adopted within the Meseberg resolutions. The implementation of the Meseberg resolutions were performed in three packages primarily including amending laws as well as support measures. The authors of the contribution under consideration compare the climate protection instruments realized by IECP with the presentations in the IECP. This comparison is based on an analysis of documents and research projects in the periphery of the IECP and on a survey of target groups and other relevant actors on the effectiveness of the IECP mechanisms. The result of this comparison is summarized in form of 27 measures.

  3. Coordinated Control Strategies for Offshore Wind Farm Integration via VSC-HVDC for System Frequency Support

    DEFF Research Database (Denmark)

    Li, Yujun; Xu, Zhao; Østergaard, Jacob

    2017-01-01

    Coordinated control strategies to provide system inertia support for main grid from offshore wind farm that is integrated through HVdc transmission is the subject matter of this paper. The strategy that seeks to provide inertia support to the main grid through simultaneous utilization of HVdc...... capacitors energy, and wind turbines (WTs) inertia without installing the remote communication of two HVdc terminals is introduced in details. Consequently, a novel strategy is proposed to improve system inertia through sequentially exerting dc capacitors energy and then WTs inertia via a cascading control...

  4. Planning the future of JPL's management and administrative support systems around an integrated database

    Science.gov (United States)

    Ebersole, M. M.

    1983-01-01

    JPL's management and administrative support systems have been developed piece meal and without consistency in design approach over the past twenty years. These systems are now proving to be inadequate to support effective management of tasks and administration of the Laboratory. New approaches are needed. Modern database management technology has the potential for providing the foundation for more effective administrative tools for JPL managers and administrators. Plans for upgrading JPL's management and administrative systems over a six year period evolving around the development of an integrated management and administrative data base are discussed.

  5. Starting early: integration of self-management support into an acute stroke service.

    Science.gov (United States)

    Mäkelä, Petra; Gawned, Sara; Jones, Fiona

    2014-01-01

    Self-management support following stroke is rare, despite emerging evidence for impact on patient outcomes. The promotion of a common approach to self-management support across a stroke pathway requires collaboration between professionals. To date, the feasibility of self-management support in acute stroke settings has not been evaluated. The Bridges stroke self-management package (SMP) is based on self-efficacy principles. It is delivered by professionals and supported by a patient-held workbook. The aim of this project was to introduce the Bridges stroke SMP to the multidisciplinary staff of a London hyperacute and acute stroke unit. The 'Plan Do Study Act' (PDSA) cycle guided iterative stages of project development, with normalisation process theory helping to embed the intervention into existing ways of working. Questionnaires explored attitudes, beliefs and experiences of the staff who were integrating self-management support into ways of working in the acute stroke setting. Self-management support training was delivered to a total of 46 multidisciplinary stroke staff. Of the staff who attended the follow-up training, 66% had implemented Bridges self-management support with patients since initial training, and 100% felt their practice had changed. Questionnaire findings demonstrated that staff attitudes and beliefs had changed following training, particularly regarding ownership and type of rehabilitation goals set, and prioritisation of self-management support within acute stroke care. Staff initiated an audit of washing and dressing practices pre- and post-training. This was designed to evaluate the number of occasions when techniques were used by staff to facilitate patients' independence and self-management. They found that the number of occasions featuring optimum practice went from 54% at baseline to 63% at three months post-training. This project demonstrated the feasibility of integrating self-management support into an acute stroke setting. Further

  6. The effectiveness of support groups in Asian breast cancer patients: An integrative review

    Directory of Open Access Journals (Sweden)

    Fang-Yu Chou

    2016-01-01

    Full Text Available Cancer support group has been studied as an intervention to improve patient psychosocial well-being. The effectiveness of support groups among Asian breast cancer (BC patients has been unclear and received limited attention to the evidence of its effectiveness. The social-cognitive processing theory underlies the principles of support groups and advocates that a positive, supportive social environment can improve cognitive processing. The purpose of this paper is to present an integrative review of research evidence on the effectiveness of cancer support groups with Asian BC patients. Empirical studies related to support group among Asian and Asian American BC patients published between 1982 and April 2014 are reviewed. There are 15 studies selected (12 from the Asian-Pacific region and 3 from Western countries. The review includes 1 qualitative study, 3 descriptive studies, 1 mixed method design, and 10 experimental or quasi-experimental studies. The support group intervention activities include psycho-educational program such as health education, problem-solving, and stress management. These studies support the effectiveness of support group in alleviating psychological distress and supporting quality of life of Asian BC women. Overall, there is limited research on the use and effectiveness of support groups with Asians cancer patients in Asia and in Western countries. Without accounting for Asian immigrants overseas, the Asian population is expected to grow from 4.3 to 5.3 billion by 2050. As cancer patients become more diverse due to global emigration, more rigorous studies examining the effectiveness of psychosocial intervention among transcultural cancer patients are needed.

  7. The Effectiveness of Support Groups in Asian Breast Cancer Patients: An Integrative Review.

    Science.gov (United States)

    Chou, Fang-Yu; Lee-Lin, Frances; Kuang, Lily Y

    2016-01-01

    Cancer support group has been studied as an intervention to improve patient psychosocial well-being. The effectiveness of support groups among Asian breast cancer (BC) patients has been unclear and received limited attention to the evidence of its effectiveness. The social-cognitive processing theory underlies the principles of support groups and advocates that a positive, supportive social environment can improve cognitive processing. The purpose of this paper is to present an integrative review of research evidence on the effectiveness of cancer support groups with Asian BC patients. Empirical studies related to support group among Asian and Asian American BC patients published between 1982 and April 2014 are reviewed. There are 15 studies selected (12 from the Asian-Pacific region and 3 from Western countries). The review includes 1 qualitative study, 3 descriptive studies, 1 mixed method design, and 10 experimental or quasi-experimental studies. The support group intervention activities include psycho-educational program such as health education, problem-solving, and stress management. These studies support the effectiveness of support group in alleviating psychological distress and supporting quality of life of Asian BC women. Overall, there is limited research on the use and effectiveness of support groups with Asians cancer patients in Asia and in Western countries. Without accounting for Asian immigrants overseas, the Asian population is expected to grow from 4.3 to 5.3 billion by 2050. As cancer patients become more diverse due to global emigration, more rigorous studies examining the effectiveness of psychosocial intervention among transcultural cancer patients are needed.

  8. Medical Device Integrated Vital Signs Monitoring Application with Real-Time Clinical Decision Support.

    Science.gov (United States)

    Moqeem, Aasia; Baig, Mirza; Gholamhosseini, Hamid; Mirza, Farhaan; Lindén, Maria

    2018-01-01

    This research involves the design and development of a novel Android smartphone application for real-time vital signs monitoring and decision support. The proposed application integrates market available, wireless and Bluetooth connected medical devices for collecting vital signs. The medical device data collected by the app includes heart rate, oxygen saturation and electrocardiograph (ECG). The collated data is streamed/displayed on the smartphone in real-time. This application was designed by adopting six screens approach (6S) mobile development framework and focused on user-centered approach and considered clinicians-as-a-user. The clinical engagement, consultations, feedback and usability of the application in the everyday practices were considered critical from the initial phase of the design and development. Furthermore, the proposed application is capable to deliver rich clinical decision support in real-time using the integrated medical device data.

  9. Stakeholder Meeting: Integrated Knowledge Translation Approach to Address the Caregiver Support Gap.

    Science.gov (United States)

    Holroyd-Leduc, Jayna M; McMillan, Jacqueline; Jette, Nathalie; Brémault-Phillips, Suzette C; Duggleby, Wendy; Hanson, Heather M; Parmar, Jasneet

    2017-03-01

    Family caregivers are an integral and increasingly overburdened part of the health care system. There is a gap between what research evidence shows is beneficial to caregivers and what is actually provided. Using an integrated knowledge translation approach, a stakeholder meeting was held among researchers, family caregivers, caregiver associations, clinicians, health care administrators, and policy makers. The objectives of the meeting were to review current research evidence and conduct multi-stakeholder dialogue on the potential gaps, facilitators, and barriers to the provision of caregiver supports. A two-day meeting was attended by 123 individuals. Three target populations of family caregivers were identified for discussion: caregivers of seniors with dementia, caregivers in end-of-life care, and caregivers of frail seniors with complex health needs. The results of this meeting can and are being used to inform the development of implementation research endeavours and policies targeted at providing evidence-informed caregiver supports.

  10. Supporting Facility Management Processes through End-Users’ Integration and Coordinated BIM-GIS Technologies

    Directory of Open Access Journals (Sweden)

    Claudio Mirarchi

    2018-05-01

    Full Text Available The integration of facility management and building information modelling (BIM is an innovative and critical undertaking process to support facility maintenance and management. Even though recent research has proposed various methods and performed an increasing number of case studies, there are still issues of communication processes to be addressed. This paper presents a theoretical framework for digital systems integration of virtual models and smart technologies. Based on the comprehensive analysis of existing technologies for indoor localization, a new workflow is defined and designed, and it is utilized in a practical case study to test the model performance. In the new workflow, a facility management supporting platform is proposed and characterized, featuring indoor positioning systems to allow end users to send geo-referenced reports to central virtual models. In addition, system requirements, information technology (IT architecture and application procedures are presented. Results show that the integration of end users in the maintenance processes through smart and easy tools can overcome the existing limits of barcode systems and building management systems for failure localization. The proposed framework offers several advantages. First, it allows the identification of every element of an asset including wide physical building elements (walls, floors, etc. without requiring a prior mapping. Second, the entire cycle of maintenance activities is managed through a unique integrated system including the territorial dimension. Third, data are collected in a standard structure for future uses. Furthermore, the integration of the process in a centralized BIM-GIS (geographical information system information management system admit a scalable representation of the information supporting facility management processes in terms of assets and supply chain management and monitoring from a spatial perspective.

  11. Overcoming communication challenges in integrative supportive cancer care: The integrative physician, the psycho-oncologist, and the patient.

    Science.gov (United States)

    Ben-Arye, Eran; Shavit, Efrat; Wiental, Haya; Schiff, Elad; Agour, Olga; Samuels, Noah

    2016-12-01

    Complementary/integrative medicine (CIM) services are increasingly being integrated into conventional supportive cancer care, presenting a number of challenges to communication between healthcare professionals (HCPs). The purpose of the present study was to explore the impact of the communication between integrative physicians (IPs) trained in CIM and social workers (SWs) working as psycho-oncologists in the same oncology setting. We examine whether IP-SW communication correlates with the number of patient-SW sessions, as provided within the oncology department. SW-IP communication, defined as a summary of the IP consultation sent to the patient's SW, was compared to SW-patient communication, defined as the number of psycho-oncology treatment sessions. Of 344 patients referred by their oncology HCP for IP consultation, 91 were referred by an SW and 253 by an oncologist or nurse. IP-to-SW summaries were provided for 150 patients referred by a non-SW HCP (43.6%), and for 91 of SW-referred patients (26.5%). In all, 32 patients referred to the IP had no psycho-oncology interaction with an SW; 58 only one meeting; and 254 with ≥2 interactions, with 119 having >6 sessions. SW-patient interactions were greater with higher rates of IP-SW communication, for both patients referred by an SW (79.1%) and those referred by a non-SW HCP (77.3%) when compared to patients for whom no summary was provided (64.1%; p= 0.02). A greater level of IP-SW communication, measured by the provision of an IP summary to the patient's SW, was found to correlate with a higher rate of SW-patient interactions. The use of a structured two-way referral-summary between IPs and SWs has the potential to advance the SW-patient psycho-oncology interaction, within an integrative supportive cancer care setting. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. Social support networks and eating disorders: an integrative review of the literature

    OpenAIRE

    Leonidas, Carolina; dos Santos, Manoel Antônio

    2014-01-01

    Carolina Leonidas, Manoel Antônio dos Santos Department of Psychology, Faculty of Philosophy, Sciences and Letters of Ribeirão Preto, University of São Paulo, Brazil Aims: This study aimed to analyze the scientific literature about social networks and social support in eating disorders (ED). Methods: By combining keywords, an integrative review was performed. It included publications from 2006–2013, retrieved from the MEDLINE, LILACS, PsycINFO, an...

  13. Barriers and challenges in integration of anthroposophic medicine in supportive breast cancer care.

    Science.gov (United States)

    Ben-Arye, Eran; Schiff, Elad; Levy, Moti; Raz, Orit Gressel; Barak, Yael; Bar-Sela, Gil

    2013-01-01

    In the last decade, more and more oncology centers are challenged with complementary medicine (CM) integration within supportive breast cancer care. Quality of life (QOL) improvement and attenuation of oncology treatment side effects are the core objectives of integrative CM programs in cancer care. Yet, limited research is available on the use of specific CM modalities in an integrative setting and on cancer patients' compliance with CM consultation. Studies are especially warranted to view the clinical application of researched CM modalities, such as anthroposophic medicine (AM), a unique CM modality oriented to cancer supportive care. Our objective was to characterize consultation patterns provided by physicians trained in CM following oncology health-care practitioners' referral of patients receiving chemotherapy. We aimed to identify characteristics of patients who consulted with AM and to explore patients' compliance to AM treatment. Of the 341 patients consulted with integrative physicians, 138 were diagnosed with breast cancer. Following integrative physician consultation, 56 patients were advised about AM treatment and 285 about other CM modalities. Logistic multivariate regression model found that, compared with patients receiving non-anthroposophic CM, the AM group had significantly greater rates of previous CM use [EXP(B) = 3.25, 95% C.I. 1.64-6.29, p = 0.001] and higher rates of cancer recurrence at baseline (p = 0.038). Most AM users (71.4%) used a single AM modality, such as mistletoe (viscum album) injections, oral AM supplements, or music therapy. Compliance with AM modalities following physician recommendation ranged from 44% to 71% of patients. We conclude that AM treatment provided within the integrative oncology setting is feasible based on compliance assessment. Other studies are warranted to explore the effectiveness of AM in improving patients' QOL during chemotherapy.

  14. Patient Segmentation Analysis Offers Significant Benefits For Integrated Care And Support.

    Science.gov (United States)

    Vuik, Sabine I; Mayer, Erik K; Darzi, Ara

    2016-05-01

    Integrated care aims to organize care around the patient instead of the provider. It is therefore crucial to understand differences across patients and their needs. Segmentation analysis that uses big data can help divide a patient population into distinct groups, which can then be targeted with care models and intervention programs tailored to their needs. In this article we explore the potential applications of patient segmentation in integrated care. We propose a framework for population strategies in integrated care-whole populations, subpopulations, and high-risk populations-and show how patient segmentation can support these strategies. Through international case examples, we illustrate practical considerations such as choosing a segmentation logic, accessing data, and tailoring care models. Important issues for policy makers to consider are trade-offs between simplicity and precision, trade-offs between customized and off-the-shelf solutions, and the availability of linked data sets. We conclude that segmentation can provide many benefits to integrated care, and we encourage policy makers to support its use. Project HOPE—The People-to-People Health Foundation, Inc.

  15. Design of an integrated operator support system for advanced NPP MCRs. Issues and perspectives

    International Nuclear Information System (INIS)

    Lee, Seung Jun; Seong Poong-Hyun

    2010-01-01

    Recently, human error has been highlighted as one of the main causes of accidents in nuclear power plants (NPPs). In order to prevent human errors during the main control room (MCR) operations, which are highly complex and mentally taxing activities, improved interfaces and operator support systems have been developed for advanced MCRs. Although operator support systems have the capability to improve the safety and reliability of an NPP, inappropriate designs can have adverse effects on the system safety. Designs based on systematic development frames and validation/verification of the systems are pivotal strategies to circumvent the negative effects of operator support systems. In this paper, an integrated operator support system designed to aid the cognitive activities of operators as well as theoretical and experimental evaluation methods of operator support systems are reviewed. From this review, it was concluded that not only issues about systems (e.g., the accuracy of the system outputs), but also issues about human operators who use the systems (for instance, information quality, the operator's trust and dependency on support systems) should be considered in the design of efficient operator support systems. (author)

  16. Between marketing and financial support : Dutch municipal policy instruments to improve the quality of private housing stock

    NARCIS (Netherlands)

    Tambach, M.; Meijer, F.; Visscher, H.

    2011-01-01

    Dutch municipalities are faced with an ageing private housing stock, of which parts show a diversity of quality backlogs, including their energy quality. Dutch municipalities are in the process of developing a combination of communicative and economic policy instruments to seduce private homeowners

  17. Demographic characteristics of patients using a fully integrated psychosocial support service for cancer patients

    Directory of Open Access Journals (Sweden)

    Hope Teresa

    2009-12-01

    Full Text Available Abstract Background Psychosocial support services are an important component of modern cancer treatment. A major challenge for all psychosocial services is the achievement of equity of use. Previous studies in the UK have found that women of higher socio-economic status with breast cancer were over-represented amongst those accessing support services. People with other cancer diagnoses, those from socio-economically deprived areas, and men, were under-represented. Findings The Oncology Health Service, Kingston Upon Hull, UK, delivers fully integrated psychosocial support and interventions. To assess equity of access in this service, a cross-sectional study of all patients with cancer accessing the service during a 5 day period was carried out. One hundred and forty-five patients attended. Forty four percent were male, and the types of cancer were broadly in the proportions expected on the basis of population prevalence (breast cancer 22%, colorectal cancer 21%, lung cancer 16%. Sixty six percent came from the three most deprived quintiles of the Townsend deprivation Index. Conclusions The fully integrated Oncology Health Service in Hull is accessed by a more diverse range of patients than previously reported for other services, and is an example of a model of service by which socially equitable use of psychosocial support in the National Health Service might be achieved.

  18. Towards An Intelligent Model-Based Decision Support System For An Integrated Oil Company (EGPC)

    International Nuclear Information System (INIS)

    Khorshid, M.; Hassan, H.; Abdel Latife, M.A.

    2004-01-01

    Decision Support System (DSS) is an interactive, flexible and adaptable computer-based support system specially developed for supporting the solution of unstructured management problems [31] DSS has become widespread for oil industry domain in recent years. The computer-based DSS, which were developed and implemented in oil industry, are used to address the complex short-term planning and operational issues associated with downstream industry. Most of these applications concentrate on the data-centered tools, while the model-centered applications of DSS are still very limited up till now [20]. This study develops an Intelligent Model-Based DSS for an integrated oil company, to help policy makers and petroleum planner in improving the effectiveness of the strategic planning in oil sector. This domain basically imposes semi-structured or unstructured decisions and involves a very complex modeling process

  19. Fusion Analytics: A Data Integration System for Public Health and Medical Disaster Response Decision Support

    Science.gov (United States)

    Passman, Dina B.

    2013-01-01

    Objective The objective of this demonstration is to show conference attendees how they can integrate, analyze, and visualize diverse data type data from across a variety of systems by leveraging an off-the-shelf enterprise business intelligence (EBI) solution to support decision-making in disasters. Introduction Fusion Analytics is the data integration system developed by the Fusion Cell at the U.S. Department of Health and Human Services (HHS), Office of the Assistant Secretary for Preparedness and Response (ASPR). Fusion Analytics meaningfully augments traditional public and population health surveillance reporting by providing web-based data analysis and visualization tools. Methods Fusion Analytics serves as a one-stop-shop for the web-based data visualizations of multiple real-time data sources within ASPR. The 24-7 web availability makes it an ideal analytic tool for situational awareness and response allowing stakeholders to access the portal from any internet-enabled device without installing any software. The Fusion Analytics data integration system was built using off-the-shelf EBI software. Fusion Analytics leverages the full power of statistical analysis software and delivers reports to users in a secure web-based environment. Fusion Analytics provides an example of how public health staff can develop and deploy a robust public health informatics solution using an off-the shelf product and with limited development funding. It also provides the unique example of a public health information system that combines patient data for traditional disease surveillance with manpower and resource data to provide overall decision support for federal public health and medical disaster response operations. Conclusions We are currently in a unique position within public health. One the one hand, we have been gaining greater and greater access to electronic data of all kinds over the last few years. On the other, we are working in a time of reduced government spending

  20. Integrated design support systems for conceptual design of a space power reactor

    International Nuclear Information System (INIS)

    Shimoda, Hiroshi; Yoshikawa, Hidekazu; Takahashi, Makoto; Takeoka, Satoshi; Nagamatsu, Takashi; Ishizaki, Hiroaki

    1999-01-01

    In the process of conceptual design of large and complex engineering systems such as a nuclear power reactor, there must be various human works by several fields of engineers on each stage of design, analysis and evaluation. In this study, we have rearranged the design information to reduce the human workloads and have studied an efficient method to support the conceptual design works by new information technologies. For this purpose, we have developed two design support environments for conceptual design of a space power reactor as a concrete design target. When constructing an integrated design support environment, VINDS, which employs virtual reality(VR) technology, we focused on visualization of physical structure, functional organization and analysis calculation with full usage of easy perception and direct manipulation of VR. On the other hand, when constructing another asynchronous and distributed design support environment, WINDS, which employs WWW technology, we improved the support functions for cooperative design works among various fields of experts. In this paper, the basic concepts, configurations and functions of the design support environments are first described, then the future improvement is surveyed by their intercomparison. (author)

  1. Nurses' clinical reasoning practices that support safe medication administration: An integrative review of the literature.

    Science.gov (United States)

    Rohde, Emily; Domm, Elizabeth

    2018-02-01

    To review the current literature about nurses' clinical reasoning practices that support safe medication administration. The literature about medication administration frequently focuses on avoiding medication errors. Nurses' clinical reasoning used during medication administration to maintain medication safety receives less attention in the literature. As healthcare professionals, nurses work closely with patients, assessing and intervening to promote mediation safety prior to, during and after medication administration. They also provide discharge teaching about using medication safely. Nurses' clinical reasoning and practices that support medication safety are often invisible when the focus is medication errors avoidance. An integrative literature review was guided by Whittemore and Knafl's (Journal of Advanced Nursing, 5, 2005 and 546) five-stage review of the 11 articles that met review criteria. This review is modelled after Gaffney et al.'s (Journal of Clinical Nursing, 25, 2016 and 906) integrative review on medical error recovery. Health databases were accessed and systematically searched for research reporting nurses' clinical reasoning practices that supported safe medication administration. The level and quality of evidence of the included research articles were assessed using The Johns Hopkins Nursing Evidence-Based Practice Rating Scale©. Nurses have a central role in safe medication administration, including but not limited to risk awareness about the potential for medication errors. Nurses assess patients and their medication and use knowledge and clinical reasoning to administer medication safely. Results indicated nurses' use of clinical reasoning to maintain safe medication administration was inadequately articulated in 10 of 11 studies reviewed. Nurses are primarily responsible for safe medication administration. Nurses draw from their foundational knowledge of patient conditions and organisational processes and use clinical reasoning that

  2. An Integrated Web-based Decision Support System in Disaster Risk Management

    Science.gov (United States)

    Aye, Z. C.; Jaboyedoff, M.; Derron, M. H.

    2012-04-01

    Nowadays, web based decision support systems (DSS) play an essential role in disaster risk management because of their supporting abilities which help the decision makers to improve their performances and make better decisions without needing to solve complex problems while reducing human resources and time. Since the decision making process is one of the main factors which highly influence the damages and losses of society, it is extremely important to make right decisions at right time by combining available risk information with advanced web technology of Geographic Information System (GIS) and Decision Support System (DSS). This paper presents an integrated web-based decision support system (DSS) of how to use risk information in risk management efficiently and effectively while highlighting the importance of a decision support system in the field of risk reduction. Beyond the conventional systems, it provides the users to define their own strategies starting from risk identification to the risk reduction, which leads to an integrated approach in risk management. In addition, it also considers the complexity of changing environment from different perspectives and sectors with diverse stakeholders' involvement in the development process. The aim of this platform is to contribute a part towards the natural hazards and geosciences society by developing an open-source web platform where the users can analyze risk profiles and make decisions by performing cost benefit analysis, Environmental Impact Assessment (EIA) and Strategic Environmental Assessment (SEA) with the support of others tools and resources provided. There are different access rights to the system depending on the user profiles and their responsibilities. The system is still under development and the current version provides maps viewing, basic GIS functionality, assessment of important infrastructures (e.g. bridge, hospital, etc.) affected by landslides and visualization of the impact

  3. Site-Wide Integrated Water Monitoring - Defining and Implementing Sampling Objectives to Support Site Closure - 13060

    International Nuclear Information System (INIS)

    Wilborn, Bill; Knapp, Kathryn; Farnham, Irene; Marutzky, Sam

    2013-01-01

    The Underground Test Area (UGTA) activity is responsible for assessing and evaluating the effects of the underground nuclear weapons tests on groundwater at the Nevada National Security Site (NNSS), formerly the Nevada Test Site (NTS), and implementing a corrective action closure strategy. The UGTA strategy is based on a combination of characterization, modeling studies, monitoring, and institutional controls (i.e., monitored natural attenuation). The closure strategy verifies through appropriate monitoring activities that contaminants of concern do not exceed the SDWA at the regulatory boundary and that adequate institutional controls are established and administered to ensure protection of the public. Other programs conducted at the NNSS supporting the environmental mission include the Routine Radiological Environmental Monitoring Program (RREMP), Waste Management, and the Infrastructure Program. Given the current programmatic and operational demands for various water-monitoring activities at the same locations, and the ever-increasing resource challenges, cooperative and collaborative approaches to conducting the work are necessary. For this reason, an integrated sampling plan is being developed by the UGTA activity to define sampling and analysis objectives, reduce duplication, eliminate unnecessary activities, and minimize costs. The sampling plan will ensure the right data sets are developed to support closure and efficient transition to long-term monitoring. The plan will include an integrated reporting mechanism for communicating results and integrating process improvements within the UGTA activity as well as between other U.S. Department of Energy (DOE) Programs. (authors)

  4. Integrating a flexible modeling framework (FMF) with the network security assessment instrument to reduce software security risk

    Science.gov (United States)

    Gilliam, D. P.; Powell, J. D.

    2002-01-01

    This paper presents a portion of an overall research project on the generation of the network security assessment instrument to aid developers in assessing and assuring the security of software in the development and maintenance lifecycles.

  5. Integrated remote sensing and visualization (IRSV) system for transportation infrastructure operations and management, phase one, volume 4 : use of knowledge integrated visual analytics system in supporting bridge management.

    Science.gov (United States)

    2009-12-01

    The goals of integration should be: Supporting domain oriented data analysis through the use of : knowledge augmented visual analytics system. In this project, we focus on: : Providing interactive data exploration for bridge managements. : ...

  6. Supporting frail seniors through a family physician and Home Health integrated care model in Fraser Health

    Directory of Open Access Journals (Sweden)

    Grace Haeson Park

    2014-03-01

    Full Text Available Background: A major effort is underway to integrate primary and community care in Canada's western province of British Columbia and in Fraser Health, its largest health authority. Integrated care is a critical component of Fraser Health's planning, to meet the challenges of caring for a growing, elderly population that is presenting more complex and chronic medical conditions. Description of integrated practice: An integrated care model partners family physicians with community-based home health case managers to support frail elderly patients who live at home. It is resulting in faster response times to patient needs, more informed assessments of a patient's state of health and pro-active identification of emerging patient issues. Early results: The model is intended to improve the quality of patient care and maintain the patients’ health status, to help them live at home confidently and safely, as long as possible. Preliminary pilot data measuring changes in home care services is showing positive trends when it comes to extending the length of a person's survival/tenure in the community (living in their home vs. admitted to residential care or deceased. Conclusion: Fraser Health's case manager–general practitioner partnership model is showing promising results including higher quality, appropriate, coordinated and efficient care; improved patient, caregiver and physician interactions with the system; improved health and prevention of acute care visits by senior adult patients.

  7. An integrative review of literature examining psychometric properties of instruments measuring anxiety or fear in hospitalized children.

    Science.gov (United States)

    Foster, Roxie L; Park, Jeong-hwan

    2012-06-01

    Anxiety and fear are among the most frequently reported emotional responses to hospitalization and are known to be contributing factors to pain and other negative patient outcomes. The first step in confronting unnecessary anxiety and fear is to identify valid and clinically feasible assessment instruments. The purpose of this paper is to review and evaluate instruments that measure children's fear or anxiety associated with hospitalization or painful procedures. A search was conducted of published English-language literature from 1980 through 2010 with the use of Ovid Health and Psychosocial Instruments, Medline, Nursing/Academic Edition, Cinahl, and Google Scholar. Inclusion criteria specified that the self-report instrument: 1) was developed in English; 2) was developed for and/or widely used with hospitalized children or children undergoing medical procedures or treatment; and 3) had research evidence of psychometric properties from at least five different studies. A comprehensive review of the literature revealed only five fear or anxiety instruments with adequate testing for evaluation of reliability and validity. Although all instruments have beginning psychometric adequacy, no one tool stands out as superior to the others. Therefore, we recommend that researchers and clinicians exercise caution in choosing assessment instruments, balancing potential strengths with reported limitations. Using more than one tool (triangulating) may be one way to achieve more credible results. Knowledge of credible existing instruments alerts us to what is possible today and to the imperative for research that will improve communication with children tomorrow. Copyright © 2012 American Society for Pain Management Nursing. Published by Elsevier Inc. All rights reserved.

  8. A study of diverse clinical decision support rule authoring environments and requirements for integration

    Directory of Open Access Journals (Sweden)

    Zhou Li

    2012-11-01

    Full Text Available Abstract Background Efficient rule authoring tools are critical to allow clinical Knowledge Engineers (KEs, Software Engineers (SEs, and Subject Matter Experts (SMEs to convert medical knowledge into machine executable clinical decision support rules. The goal of this analysis was to identify the critical success factors and challenges of a fully functioning Rule Authoring Environment (RAE in order to define requirements for a scalable, comprehensive tool to manage enterprise level rules. Methods The authors evaluated RAEs in active use across Partners Healthcare, including enterprise wide, ambulatory only, and system specific tools, with a focus on rule editors for reminder and medication rules. We conducted meetings with users of these RAEs to discuss their general experience and perceived advantages and limitations of these tools. Results While the overall rule authoring process is similar across the 10 separate RAEs, the system capabilities and architecture vary widely. Most current RAEs limit the ability of the clinical decision support (CDS interventions to be standardized, sharable, interoperable, and extensible. No existing system meets all requirements defined by knowledge management users. Conclusions A successful, scalable, integrated rule authoring environment will need to support a number of key requirements and functions in the areas of knowledge representation, metadata, terminology, authoring collaboration, user interface, integration with electronic health record (EHR systems, testing, and reporting.

  9. Conference on support mechanisms evolution and renewable energies integration in France and in Germany markets

    International Nuclear Information System (INIS)

    Praetorius, Barbara; Cruciani, Michel; Schwarz, Virginie; Nabe, Christian; Mayer, Joerg; Vogel, Wolfram; Abegg, Janosch; Lioret, Sonia; Avedissian, Franck; Cosse, Julien; Woodhouse, Stephen; Bradbury, Simon; Mollard, Matthieu; Solal, Lucie; Nodari, Antonio

    2015-01-01

    The French-German office for Renewable energies (OFAEnR) organised a conference on the support mechanisms evolution and the renewable energies integration in France and in Germany markets. In the framework of this French-German exchange of experience, participants exchanged views on the current support mechanisms in both countries and on their forthcoming legal modifications. The legal framework of direct renewable energy selling in the German market and the impacts and challenges of this model were addressed as well. Technical aspects of auction sales of electricity were approached too and illustrated with experience feedbacks from direct selling operators. This document brings together the available presentations (slides) made during this event: 1 - Tenders for Renewable energy and the German Energiewende - Perspectives, challenges, debates (Barbara Praetorius); 2 - Promotion of energy from renewable sources - A short analysis of the French public policy 2000 -2014 (Michel Cruciani); 3 - Support schemes for renewables in France and their evolution as foreseen in the energy transition law (Virginie Schwarz); 4 - Direct electricity selling on the wholesale market: legal framework and perspective - a French-German comparison (Christian Nabe); 5 - Self-consumption and power purchase Business framework in Germany (Joerg Mayer); 6 - Successful Integration of Renewable energies in the Market: the Role of the Power exchange (Wolfram Vogel); 7 - Earn money and do good by marketing renewables (Janosch Abegg); 8 - Proposals for a new electricity market design (Sonia Lioret)

  10. A field experiment of energy education using integrative learning support system

    International Nuclear Information System (INIS)

    Obayashi, Fumiaki; Yamamoto, Atsumu; Ito, Kyoko; Shimoda, Hiroshi; Yoshikawa, Hidekazu

    2002-01-01

    A new energy learning support system for higher education was the object of this experiment. The aim of this learning support system is to support students within an integrative study environment in which various personal skills and general knowledge on energy related issues are to be developed. The main goals of this learning tool for the students are to simulate their interest and creativity, to enhance awareness, to increase capability of researching on the subject and to improve problem-solving skills on energy related issues. The salient feature of this learning support system is that it is used for group learning by which each learner can develop the ability to reflect on the subject through mutual discussion. Moreover, in order to keep the attention of the students on the topic and provide them with a better assimilation of the curriculum, a personified agent is used as a cooperative associate who assists learners through natural communication, using voice conversation function in Japanese language. Then, the subject experiment has been conducted. Also, means of effective energy education are discussed in this research. As a conclusion, this learning support system is proven to be effective and the use of it for energy education is recommended. (author)

  11. Experience Supporting the Integration of LHC Experiments Software Framework with the LCG Middleware

    CERN Document Server

    Santinelli, Roberto

    2006-01-01

    The LHC experiments are currently preparing for data acquisition in 2007 and because of the large amount of required computing and storage resources, they decided to embrace the grid paradigm. The LHC Computing Project (LCG) provides and operates a computing infrastructure suitable for data handling, Monte Carlo production and analysis. While LCG offers a set of high level services, intended to be generic enough to accommodate the needs of different Virtual Organizations, the LHC experiments software framework and applications are very specific and focused on the computing and data models. The LCG Experiment Integration Support team works in close contact with the experiments, the middleware developers and the LCG certification and operations teams to integrate the underlying grid middleware with the experiment specific components. The strategical position between the experiments and the middleware suppliers allows EIS team to play a key role at communications level between the customers and the service provi...

  12. Scalable Integrated Multi-Mission Support System Simulator Release 3.0

    Science.gov (United States)

    Kim, John; Velamuri, Sarma; Casey, Taylor; Bemann, Travis

    2012-01-01

    The Scalable Integrated Multi-mission Support System (SIMSS) is a tool that performs a variety of test activities related to spacecraft simulations and ground segment checks. SIMSS is a distributed, component-based, plug-and-play client-server system useful for performing real-time monitoring and communications testing. SIMSS runs on one or more workstations and is designed to be user-configurable or to use predefined configurations for routine operations. SIMSS consists of more than 100 modules that can be configured to create, receive, process, and/or transmit data. The SIMSS/GMSEC innovation is intended to provide missions with a low-cost solution for implementing their ground systems, as well as significantly reducing a mission s integration time and risk.

  13. An adaptive case management system to support integrated care services: Lessons learned from the NEXES project.

    Science.gov (United States)

    Cano, Isaac; Alonso, Albert; Hernandez, Carme; Burgos, Felip; Barberan-Garcia, Anael; Roldan, Jim; Roca, Josep

    2015-06-01

    Extensive deployment and sustainability of integrated care services (ICS) constitute an unmet need to reduce the burden of chronic conditions. The European Union project NEXES (2008-2013) assessed the deployment of four ICS encompassing the spectrum of severity of chronic patients. The current study aims to (i) describe the open source Adaptive Case Management (ACM) system (Linkcare®) developed to support the deployment of ICS at the level of healthcare district; (ii) to evaluate its performance; and, (iii) to identify key challenges for regional deployment of ICS. We first defined a conceptual model for ICS management and execution composed of five main stages. We then specified an associated logical model considering the dynamic runtime of ACM. Finally, we implemented the four ICS as a physical model with an ICS editor to allow professionals (case managers) to play active roles in adapting the system to their needs. Instances of ICS were then run in Linkcare®. Four ICS provided a framework for evaluating the system: Wellness and Rehabilitation (W&R) (number of patients enrolled in the study (n)=173); Enhanced Care (EC) in frail chronic patients to prevent hospital admissions, (n=848); Home Hospitalization and Early Discharge (HH/ED) (n=2314); and, Support to remote diagnosis (Support) (n=7793). The method for assessment of telemedicine applications (MAST) was used for iterative evaluation. Linkcare® supports ACM with shared-care plans across healthcare tiers and offers integration with provider-specific electronic health records. Linkcare® successfully contributed to the deployment of the four ICS: W&R facilitated long-term sustainability of training effects (p<0.01) and active life style (p<0.03); EC showed significant positive outcomes (p<0.05); HH/ED reduced on average 5 in-hospital days per patient with a 30-d re-admission rate of 10%; and, Support, enhanced community-based quality forced spirometry testing (p<0.01). Key challenges for regional deployment

  14. Instrumental Capital

    Directory of Open Access Journals (Sweden)

    Gabriel Valerio

    2007-07-01

    Full Text Available During the history of human kind, since our first ancestors, tools have represented a mean to reach objectives which might otherwise seemed impossibles. In the called New Economy, where tangibles assets appear to be losing the role as the core element to produce value versus knowledge, tools have kept aside man in his dairy work. In this article, the author's objective is to describe, in a simple manner, the importance of managing the organization's group of tools or instruments (Instrumental Capital. The characteristic conditions of this New Economy, the way Knowledge Management deals with these new conditions and the sub-processes that provide support to the management of Instrumental Capital are described.

  15. Social integration in a reversed integration neighbourhood? : Perspectives of neighbours, family members, and direct support professionals and the role of formal and informal support

    NARCIS (Netherlands)

    Venema, Eleonora

    2016-01-01

    This research focused on the social integration of people with intellectual disabilities who live in a reversed integration neighbourhood. Reversed integration means that the grounds of the residential facility is turned into a regular neighbourhood wherein people with and without intellectual

  16. Objective community integration of mental health consumers living in supported housing and of others in the community.

    Science.gov (United States)

    Yanos, Philip T; Stefancic, Ana; Tsemberis, Sam

    2012-01-01

    Housing programs for people with severe mental illnesses aim to maximize community integration. However, little is known about how the community integration of mental health consumers living in supported housing compares with that of other community residents in the socially disadvantaged communities where supported housing is often located. The purpose of this study was to examine predictors of objective community integration of mental health consumers living in supported housing and of other persons living in the same communities. Participants were 124 adults (60 mental health consumers and 64 other community residents) residing in designated zip codes in the Bronx, New York. Participants were administered measures of psychiatric symptoms, substance use, physical community integration (participation in local activities), social integration (interactions with community members), and citizenship (political activism or volunteering). Mental health consumers living in supported independent housing had significantly lower scores on indicators of objective community integration than other community members. However, differences were relatively small. Among mental health consumers, African-American race, education, and length of time in current residence were associated with better community integration. Findings suggest that mental health consumers living in supported housing may not achieve levels of objective community integration that are comparable with other community members; however, psychiatric factors did not account for this difference. Length of time in neighborhoods appears to be an important factor in facilitating social integration.

  17. Flagellar region 3b supports strong expression of integrated DNA and the highest chromosomal integration efficiency of the Escherichia coli flagellar regions.

    Science.gov (United States)

    Juhas, Mario; Ajioka, James W

    2015-07-01

    The Gram-negative bacterium Escherichia coli is routinely used as the chassis for a variety of biotechnology and synthetic biology applications. Identification and analysis of reliable chromosomal integration and expression target loci is crucial for E. coli engineering. Chromosomal loci differ significantly in their ability to support integration and expression of the integrated genetic circuits. In this study, we investigate E. coli K12 MG1655 flagellar regions 2 and 3b. Integration of the genetic circuit into seven and nine highly conserved genes of the flagellar regions 2 (motA, motB, flhD, flhE, cheW, cheY and cheZ) and 3b (fliE, F, G, J, K, L, M, P, R), respectively, showed significant variation in their ability to support chromosomal integration and expression of the integrated genetic circuit. While not reducing the growth of the engineered strains, the integrations into all 16 target sites led to the loss of motility. In addition to high expression, the flagellar region 3b supports the highest efficiency of integration of all E. coli K12 MG1655 flagellar regions and is therefore potentially the most suitable for the integration of synthetic genetic circuits. © 2015 The Authors. Microbial Biotechnology published by John Wiley & Sons Ltd and Society for Applied Microbiology.

  18. Network Regulation and Support Schemes - How Policy Interactions Affect the Integration of Distributed Generation

    DEFF Research Database (Denmark)

    Ropenus, Stephanie; Jacobsen, Henrik; Schröder, Sascha Thorsten

    2011-01-01

    This article seeks to investigate the interactions between the policy dimensions of support schemes and network regulation and how they affect distributed generation. Firstly, the incentives of distributed generators and distribution system operators are examined. Frequently there exists a trade......-off between the incentives for these two market agents to facilitate the integration of distributed generation. Secondly, the interaction of these policy dimensions is analyzed, including case studies based on five EU Member States. Aspects of operational nature and investments in grid and distributed...

  19. Towards Integrating the Principlist and Casuist Approaches to Ethical Decisions via Multi-Criterial Support

    DEFF Research Database (Denmark)

    Kaltoft, Mette Kjer; Nielsen, Jesper Bo; Salkeld, Glenn

    2016-01-01

    of each option, as a contribution to enhanced deliberation. As proof of concept and method an exemplar aid adds veracity and confidentiality to beneficence, non-maleficence, autonomy and justice, as the criteria, with case-based reasoning supplying the necessary inputs for the decision of whether a nurse......An interactive decision support tool based on Multi-Criteria Decision Analysis (MCDA) can help health professionals integrate the principlist (principle-based) and casuist (case-based) approaches to ethical decision making in both their training and practice. MCDA can incorporate generic ethical...

  20. Strategies for self-management support by patients with stroke: integrative review

    Directory of Open Access Journals (Sweden)

    Huana Carolina Cândido Morais

    2015-02-01

    Full Text Available OBJECTIVE To analyze strategies for self-management support by patients with stroke in the light of the methodology of the five A's (ask, advice, assess, assist and arrange. METHODS Integrative review conducted at the following databases CINAHL, SCOPUS, PubMed, Cochrane and LILACS. RESULTS A total of 43 studies published between 2000 and 2013 comprised the study sample. All proposed actions in the five A's methodology and others were included. We highlight the Assist and Arrange, in which we added actions, especially with regard to the use of technological resources and joint monitoring between patients, families and professionals. No study included all five A's, which suggests that the actions of supported self-management are developed in a fragmented way. CONCLUSION The use of five A's strategy provides guidelines for better management of patients with stroke with lower cost and higher effectiveness.

  1. Disaster Preparedness among Health Professionals and Support Staff: What is Effective? An Integrative Literature Review.

    Science.gov (United States)

    Gowing, Jeremy R; Walker, Kim N; Elmer, Shandell L; Cummings, Elizabeth A

    2017-06-01

    Introduction It is important that health professionals and support staff are prepared for disasters to safeguard themselves and the community during disasters. There has been a significantly heightened focus on disasters since the terrorist attacks of September 11, 2001 in New York (USA); however, despite this, it is evident that health professionals and support staff may not be adequately prepared for disasters. Report An integrative literature review was performed based on a keyword search of the major health databases for primary research evaluating preparedness of health professionals and support staff. The literature was quality appraised using a mixed-methods appraisal tool (MMAT), and a thematic analysis was completed to identify current knowledge and gaps. Discussion The main themes identified were: health professionals and support staff may not be fully prepared for disasters; the most effective content and methods for disaster preparedness is unknown; and the willingness of health professionals and support staff to attend work and perform during disasters needs further evaluation. Gaps were identified to guide further research and the creation of new knowledge to best prepare for disasters. These included the need for: high-quality research to evaluate the best content and methods of disaster preparedness; inclusion of the multi-disciplinary health care team as participants; preparation for internal disasters; the development of validated competencies for preparedness; validated tools for measurement; and the importance of performance in actual disasters to evaluate preparation. The literature identified that all types of disaster preparedness activities lead to improvements in knowledge, skills, or attitude preparedness for disasters. Most studies focused on external disasters and the preparedness of medical, nursing, public health, or paramedic professionals. There needs to be a greater focus on the whole health care team, including allied health

  2. Green public procurement – legal base and instruments supporting sustainable development in the construction industry in Poland

    Directory of Open Access Journals (Sweden)

    Kozik Renata

    2016-01-01

    Full Text Available In the respect of value, public procurement in the construction industry belongs to one of the largest ones in the domestic market. Therefore, green procurement for construction works should become the center of attention of public authorities in a broad sense, due to its scale and importance for the sustainable development. The authorities and contracting entities who spend public money should have the opportunity to apply such legal articles and instruments that allow them to both optimize public expenditures and consider the environmental factor, such as decreasing carbon emission. To make the idea of sustainable development a reality as European Union’s the most vital aim, EU law is implemented in Poland. Local authorities’ duty is to appropriately shape their policies and use the vital instrument of sustainable development, namely green public procurement. This paper presents a comparative analysis of legal regulations to illustrate the actual Polish and EU laws concerning the construction industry. Even though the generally applicable law allows to implement the idea of sustainable development efficiently, local self-government units in their regional policies do not report any need for specific solutions, or they do so only occasionally.

  3. Integrating conflict analysis and consensus reaching in a decision support system for water resource management.

    Science.gov (United States)

    Giordano, R; Passarella, G; Uricchio, V F; Vurro, M

    2007-07-01

    The importance of shared decision processes in water management derives from the awareness of the inadequacy of traditional--i.e. engineering--approaches in dealing with complex and ill-structured problems. It is becoming increasingly obvious that traditional problem solving and decision support techniques, based on optimisation and factual knowledge, have to be combined with stakeholder based policy design and implementation. The aim of our research is the definition of an integrated decision support system for consensus achievement (IDSS-C) able to support a participative decision-making process in all its phases: problem definition and structuring, identification of the possible alternatives, formulation of participants' judgments, and consensus achievement. Furthermore, the IDSS-C aims at structuring, i.e. systematising the knowledge which has emerged during the participative process in order to make it comprehensible for the decision-makers and functional for the decision process. Problem structuring methods (PSM) and multi-group evaluation methods (MEM) have been integrated in the IDSS-C. PSM are used to support the stakeholders in providing their perspective of the problem and to elicit their interests and preferences, while MEM are used to define not only the degree of consensus for each alternative, highlighting those where the agreement is high, but also the consensus label for each alternative and the behaviour of individuals during the participative decision-making. The IDSS-C is applied experimentally to a decision process regarding the use of treated wastewater for agricultural irrigation in the Apulia Region (southern Italy).

  4. Derisking Renewable Energy Investment. A Framework to Support Policymakers in Selecting Public Instruments to Promote Renewable Energy Investment in Developing Countries

    Energy Technology Data Exchange (ETDEWEB)

    Waissbein, Oliver; Glemarec, Yannick; Bayraktar, Hande; Schmidt, Tobias S.

    2013-03-15

    This report introduces an innovative framework to assist policymakers to quantitatively compare the impact of different public instruments to promote renewable energy. The report identifies the need to reduce the high financing costs for renewable energy in developing countries as an important task for policymakers acting today. The framework is structured in four stages: (i) risk environment, (ii) public instruments, (iii) levelised cost and (iv) evaluation. To illustrate how the framework can support decision-making in practice, the report presents findings from illustrative case studies in four developing countries. It then draws on these results to discuss possible directions for enhancing public interventions to scale-up renewable energy investment. UNDP is also releasing a financial tool for policymakers to accompany the framework. The financial tool is available for download on the UNDP website.

  5. Factors associated with integrating self-management support into primary care.

    Science.gov (United States)

    Crespo, Richard; Shrewsberry, Molly

    2007-06-01

    The purpose of this article is to expand the understanding of self-management support by describing factors that contribute to implementing a comprehensive self-management program in primary care. Four rural health centers in medically underserved areas participated in a study to document the implementation of a self-management program. This program consisted of a social marketing plan and decision-making tools to guide patients in making self-management behavior changes. The stages of change constructs of the transtheoretical model were used to design the social marketing plan. Key informant interviews were conducted at 6-month and 9-month intervals to document the implementation process. A standardized set of questions was used in the interviews. The data from the interviews were analyzed using content analysis techniques. One of the principle findings is that self-management support requires putting a system in place, not just adding a new component to primary care. The health centers that fully implemented the self-management program made an organizational commitment to keep self-management on the agenda in management meetings, clinical staff set the example by adopting self-management behaviors, and patient self-management support was implemented in multiple patient care venues. Primary care centers with limited financial resources are able to integrate self-management support into their system of chronic illness care.

  6. Social support networks and eating disorders: an integrative review of the literature.

    Science.gov (United States)

    Leonidas, Carolina; Dos Santos, Manoel Antônio

    2014-01-01

    This study aimed to analyze the scientific literature about social networks and social support in eating disorders (ED). By combining keywords, an integrative review was performed. It included publications from 2006-2013, retrieved from the MEDLINE, LILACS, PsycINFO, and CINAHL databases. The selection of articles was based on preestablished inclusion and exclusion criteria. A total of 24 articles were selected for data extraction. There was a predominance of studies that used nonexperimental and descriptive designs, and which were published in international journals. This review provided evidence of the fact that fully consolidated literature regarding social support and social networks in patients with ED is not available, given the small number of studies dedicated to the subject. We identified evidence that the family social network of patients with ED has been widely explored by the literature, although there is a lack of studies about other networks and sources of social support outside the family. The evidence presented in this study shows the need to include other social networks in health care. This expansion beyond family networks would include significant others - such as friends, colleagues, neighbors, people from religious groups, among others - who could help the individual coping with the disorder. The study also highlights the need for future research on this topic, as well as a need for greater investment in publications on the various dimensions of social support and social networks.

  7. Determination of the Integral/SPI instrumental response and his application to the observation of gamma ray lines in the Vela region

    International Nuclear Information System (INIS)

    Attie, D.

    2005-01-01

    The INTEGRAL/SPI spectrometer was designed to observe the sky in the energy band of 20 keV to 8 MeV. The specificity of instrument SPI rests on the excellent spectral resolution (2.3 keV with 1 MeV) of its detecting plan, composed of 19 cooled germanium crystals; covering an effective area of 508 cm 2 . The use of a coded mask, located at 1.7 m above the detection plan ensures to it a resolving power of 2.5 degrees. The aim of this thesis, begun before the INTEGRAL launch, is made up of two parts. The first part relates to the analysis of the spectrometer calibration data. The objective was to measure and check the performances of the telescope, in particular to validate simulations of the INTEGRAL/SPI instrument response. This objective was successfully achieved. This analysis also highlights the presence of a significant instrumental background noise. Whereas, the second part concentrates on the data analysis of the Vela region observations. I have approached two astrophysical topics dealing with: - the search for radioactive decays lines of titanium-44, which is produced by explosive nucleosynthesis, in the supernova remnant of Vela Junior and, - the search of cyclotron resonance scattering features expected towards 25 keV and 52 keV in the accreting pulsar spectrum of the x-ray binary star Vela X-1. Putting forward the hypothesis that the result obtained previously by COMPTEL is correct and considering the no-detection of the titanium-44 lines by SPI, we give a lower limit at 4500 km s -1 for the ejecta velocity from Vela Junior. The analysis on the research of the cyclotron lines have shown that the results are very sensitive to the instrumental background. Thorough studies will be necessary to guarantee an unambiguous detection of these lines. (author)

  8. The Integrated Medical Model: A Risk Assessment and Decision Support Tool for Human Space Flight Missions

    Science.gov (United States)

    Kerstman, Eric L.; Minard, Charles; FreiredeCarvalho, Mary H.; Walton, Marlei E.; Myers, Jerry G., Jr.; Saile, Lynn G.; Lopez, Vilma; Butler, Douglas J.; Johnson-Throop, Kathy A.

    2011-01-01

    This slide presentation reviews the Integrated Medical Model (IMM) and its use as a risk assessment and decision support tool for human space flight missions. The IMM is an integrated, quantified, evidence-based decision support tool useful to NASA crew health and mission planners. It is intended to assist in optimizing crew health, safety and mission success within the constraints of the space flight environment for in-flight operations. It uses ISS data to assist in planning for the Exploration Program and it is not intended to assist in post flight research. The IMM was used to update Probability Risk Assessment (PRA) for the purpose of updating forecasts for the conditions requiring evacuation (EVAC) or Loss of Crew Life (LOC) for the ISS. The IMM validation approach includes comparison with actual events and involves both qualitative and quantitaive approaches. The results of these comparisons are reviewed. Another use of the IMM is to optimize the medical kits taking into consideration the specific mission and the crew profile. An example of the use of the IMM to optimize the medical kits is reviewed.

  9. A management system integrating radiation protection and safety supporting safety culture in the hospital

    International Nuclear Information System (INIS)

    Almen, A.; Lundh, C.

    2015-01-01

    Quality assurance has been identified as an important part of radiation protection and safety for a considerable time period. A rational expansion and improvement of quality assurance is to integrate radiation protection and safety in a management system. The aim of this study was to explore factors influencing the implementing strategy when introducing a management system including radiation protection and safety in hospitals and to outline benefits of such a system. The main experience from developing a management system is that it is possible to create a vast number of common policies and routines for the whole hospital, resulting in a cost-efficient system. One of the key benefits is the involvement of management at all levels, including the hospital director. Furthermore, a transparent system will involve staff throughout the organisation as well. A management system supports a common view on what should be done, who should do it and how the activities are reviewed. An integrated management system for radiation protection and safety includes key elements supporting a safety culture. (authors)

  10. An Integrated Scenario Ensemble-Based Framework for Hurricane Evacuation Modeling: Part 1-Decision Support System.

    Science.gov (United States)

    Davidson, Rachel A; Nozick, Linda K; Wachtendorf, Tricia; Blanton, Brian; Colle, Brian; Kolar, Randall L; DeYoung, Sarah; Dresback, Kendra M; Yi, Wenqi; Yang, Kun; Leonardo, Nicholas

    2018-03-30

    This article introduces a new integrated scenario-based evacuation (ISE) framework to support hurricane evacuation decision making. It explicitly captures the dynamics, uncertainty, and human-natural system interactions that are fundamental to the challenge of hurricane evacuation, but have not been fully captured in previous formal evacuation models. The hazard is represented with an ensemble of probabilistic scenarios, population behavior with a dynamic decision model, and traffic with a dynamic user equilibrium model. The components are integrated in a multistage stochastic programming model that minimizes risk and travel times to provide a tree of evacuation order recommendations and an evaluation of the risk and travel time performance for that solution. The ISE framework recommendations offer an advance in the state of the art because they: (1) are based on an integrated hazard assessment (designed to ultimately include inland flooding), (2) explicitly balance the sometimes competing objectives of minimizing risk and minimizing travel time, (3) offer a well-hedged solution that is robust under the range of ways the hurricane might evolve, and (4) leverage the substantial value of increasing information (or decreasing degree of uncertainty) over the course of a hurricane event. A case study for Hurricane Isabel (2003) in eastern North Carolina is presented to demonstrate how the framework is applied, the type of results it can provide, and how it compares to available methods of a single scenario deterministic analysis and a two-stage stochastic program. © 2018 Society for Risk Analysis.

  11. Creating a spatial multi-criteria decision support system for energy related integrated environmental impact assessment

    Energy Technology Data Exchange (ETDEWEB)

    Wanderer, Thomas, E-mail: thomas.wanderer@dlr.de; Herle, Stefan, E-mail: stefan.herle@rwth-aachen.de

    2015-04-15

    By their spatially very distributed nature, profitability and impacts of renewable energy resources are highly correlated with the geographic locations of power plant deployments. A web-based Spatial Decision Support System (SDSS) based on a Multi-Criteria Decision Analysis (MCDA) approach has been implemented for identifying preferable locations for solar power plants based on user preferences. The designated areas found serve for the input scenario development for a subsequent integrated Environmental Impact Assessment. The capabilities of the SDSS service get showcased for Concentrated Solar Power (CSP) plants in the region of Andalusia, Spain. The resulting spatial patterns of possible power plant sites are an important input to the procedural chain of assessing impacts of renewable energies in an integrated effort. The applied methodology and the implemented SDSS are applicable for other renewable technologies as well. - Highlights: • The proposed tool facilitates well-founded CSP plant siting decisions. • Spatial MCDA methods are implemented in a WebGIS environment. • GIS-based SDSS can contribute to a modern integrated impact assessment workflow. • The conducted case study proves the suitability of the methodology.

  12. [Support to spiritual needs in hospital care. Integration perspective in modern hospitals].

    Science.gov (United States)

    Proserpio, Tullio; Piccinelli, Claudia; Arice, Carmine; Petrini, Massimo; Mozzanica, Mario; Veneroni, Laura; Clerici, Carlo Alfredo

    2014-01-01

    Within the course of medical care in the most advanced health care settings, an increasing attention is being paid to the so-called care humanization. According to this perspective, we try to integrate the usual care pathways with aspects related to the spiritual and religious dimension of all people and their families, as well as the employees themselves. It is clearly important to establish this kind of practices on the basis of scientific evidences. That is the reason why it's a necessity to improve the knowledge about the importance that spiritual assistance can offer within the current health service. The aim of this work is to show the relevance of the integration of spiritual perspectives in the hospital setting according to a multidisciplinary point of view. In this work many data that emerge from the international scientific literature, as well as the definition that is given to the concept of "spirituality" are analyzed; about this definition in fact there is not unanimous consent even today. It is also analyzed the legal situation in force within the European territory according to the different laws and social realities. Finally, the possible organizational practices related to spiritual support are described and the opportunity to specific accreditation pathways and careful training of chaplains able to integrate traditional religious practices with modern spiritual perspectives is discussed.

  13. Pipeline integrity management in an urban environment supported by an External Corrosion Direct Assessment (ECDA) application

    Energy Technology Data Exchange (ETDEWEB)

    Dus, Pedro Luiz; Valente, Antonio Carlos Rodrigues [Companhia de Gas de Sao Paulo (COMGAS), Sao Paulo, SP (Brazil); Valdes, Alberto [GE Oil and Gas-PII Pipeline Solutions, Houston, TX (United States)

    2009-07-01

    COMGAS is the largest natural gas distributing company in Brazil, having more than 700,000 costumers. Gas delivery to this customer base is achieved through a network of high-pressure steel pipelines (17 and 35 bar) with around 1,100 km (690 miles) in length, the majority operating inside urban areas. The Integrity Management of this network is a particularly difficult task since neither pigging nor hydrostatic testing can be used to inspect the existing pipelines. Direct Assessment (DA) is the only assessment technique available at the moment. As an initial stage COMGAS has implemented an innovative project called SIA (Sistema de Integridade de Ativos). SIA combines functionality targeted for guiding and implementing an External Corrosion Assessment (ECDA) procedure, with full data alignment and integration, corporate policies on safety and dedicated reporting capabilities. Seamless interaction between SIA and the existing Operations GIS system was a key specification requirement for the construction of the system. This paper describes the lessons learned during the implementation of the ECDA module of the SIA, the first application experiences of the ECDA process with the support of the module and the initial benefits obtained from the use of the new Integrity Management System. (author)

  14. Creating a spatial multi-criteria decision support system for energy related integrated environmental impact assessment

    International Nuclear Information System (INIS)

    Wanderer, Thomas; Herle, Stefan

    2015-01-01

    By their spatially very distributed nature, profitability and impacts of renewable energy resources are highly correlated with the geographic locations of power plant deployments. A web-based Spatial Decision Support System (SDSS) based on a Multi-Criteria Decision Analysis (MCDA) approach has been implemented for identifying preferable locations for solar power plants based on user preferences. The designated areas found serve for the input scenario development for a subsequent integrated Environmental Impact Assessment. The capabilities of the SDSS service get showcased for Concentrated Solar Power (CSP) plants in the region of Andalusia, Spain. The resulting spatial patterns of possible power plant sites are an important input to the procedural chain of assessing impacts of renewable energies in an integrated effort. The applied methodology and the implemented SDSS are applicable for other renewable technologies as well. - Highlights: • The proposed tool facilitates well-founded CSP plant siting decisions. • Spatial MCDA methods are implemented in a WebGIS environment. • GIS-based SDSS can contribute to a modern integrated impact assessment workflow. • The conducted case study proves the suitability of the methodology

  15. Ontology-supported research on vaccine efficacy, safety and integrative biological networks.

    Science.gov (United States)

    He, Yongqun

    2014-07-01

    While vaccine efficacy and safety research has dramatically progressed with the methods of in silico prediction and data mining, many challenges still exist. A formal ontology is a human- and computer-interpretable set of terms and relations that represent entities in a specific domain and how these terms relate to each other. Several community-based ontologies (including Vaccine Ontology, Ontology of Adverse Events and Ontology of Vaccine Adverse Events) have been developed to support vaccine and adverse event representation, classification, data integration, literature mining of host-vaccine interaction networks, and analysis of vaccine adverse events. The author further proposes minimal vaccine information standards and their ontology representations, ontology-based linked open vaccine data and meta-analysis, an integrative One Network ('OneNet') Theory of Life, and ontology-based approaches to study and apply the OneNet theory. In the Big Data era, these proposed strategies provide a novel framework for advanced data integration and analysis of fundamental biological networks including vaccine immune mechanisms.

  16. Effectiveness of policy instruments for supporting the use of waste wood as a renewable energy resource in the Czech Republic

    International Nuclear Information System (INIS)

    Jehlickova, Bohumira; Morris, Richard

    2007-01-01

    This paper focuses on an examination of the government's strategy for encouraging the use of wood as a renewable fuel in Czech households. It examines the development of modern combustion technology and its impact on the environment. It describes the estimated requirement for wood by an average household and examines the overall availability of wood as a renewable fuel in the Czech Republic. The paper analyses in detail the policy instruments used by the Czech government to promote the use of this technology. It evaluates the impact of this policy on the users of the technology and practical achievements of the policy measures with respect to the overall objective that is the promotion of generation of renewable energy

  17. A review of the evolution and trajectory of the African union as an instrument of regional integration.

    Science.gov (United States)

    Chirisa, Innocent Ew; Mumba, Artwell; Dirwai, Simbarashe O

    2014-01-01

    This review paper seeks to analyse African integration in terms of its magnitude of solidarity, the state and typology of integration and functioning. It assesses the strengths, weaknesses, objectives, successes and failures of the African integration project as well as threats to its survival. The primary goal is to sift between issues with the view of better informing the future of the integration. The paper acknowledges how, in 2002, the OAU (formed in 1963) convened to reconstitute and become the African Union (AU) composed of eight Regional Economic Communities. The reformed union has spelt out gender equality, strategic planning, intra-trade, non-indifference to suffering in member states and sustainability, as additional objectives to those of the former OAU. This idea has been to foster integration to promote peace, security and cooperation hence solidarity. It can now be assessed succinctly that African integration has arisen in the need for amalgamation of efforts to solve African problems with African solutions.

  18. IT-supported integrated care pathways for diabetes: A compilation and review of good practices.

    Science.gov (United States)

    Vrijhoef, Hubertus Jm; de Belvis, Antonio Giulio; de la Calle, Matias; de Sabata, Maria Stella; Hauck, Bastian; Montante, Sabrina; Moritz, Annette; Pelizzola, Dario; Saraheimo, Markku; Guldemond, Nick A

    2017-06-01

    Integrated Care Pathways (ICPs) are a method for the mutual decision-making and organization of care for a well-defined group of patients during a well-defined period. The aim of a care pathway is to enhance the quality of care by improving patient outcomes, promoting patient safety, increasing patient satisfaction, and optimizing the use of resources. To describe this concept, different names are used, e.g. care pathways and integrated care pathways. Modern information technologies (IT) can support ICPs by enabling patient empowerment, better management, and the monitoring of care provided by multidisciplinary teams. This study analyses ICPs across Europe, identifying commonalities and success factors to establish good practices for IT-supported ICPs in diabetes care. A mixed-method approach was applied, combining desk research on 24 projects from the European Innovation Partnership on Active and Healthy Ageing (EIP on AHA) with follow-up interviews of project participants, and a non-systematic literature review. We applied a Delphi technique to select process and outcome indicators, derived from different literature sources which were compiled and applied for the identification of successful good practices. Desk research identified sixteen projects featuring IT-supported ICPs, mostly derived from the EIP on AHA, as good practices based on our criteria. Follow-up interviews were then conducted with representatives from 9 of the 16 projects to gather information not publicly available and understand how these projects were meeting the identified criteria. In parallel, the non-systematic literature review of 434 PubMed search results revealed a total of eight relevant projects. On the basis of the selected EIP on AHA project data and non-systematic literature review, no commonalities with regard to defined process or outcome indicators could be identified through our approach. Conversely, the research produced a heterogeneous picture in all aspects of the projects

  19. Design of CIAO, a research program to support the development of an integrated approach to prevent overweight and obesity in the Netherlands.

    Science.gov (United States)

    van Koperen, Marije Tm; van der Kleij, Rianne Mjj; Renders, Carry Cm; Crone, Matty Mr; Hendriks, Anna-Marie Am; Jansen, Maria M; van de Gaar, Vivian Vm; Raat, Hein Jh; Ruiter, Emilie Elm; Molleman, Gerard Grm; Schuit, Jantine Aj; Seidell, Jacob Jc

    2014-01-01

    The aim of this paper is to describe the research aims, concepts and methods of the research Consortium Integrated Approach of Overweight (CIAO). CIAO is a concerted action of five Academic Collaborative Centres, local collaborations between academic institutions, regional public health services, local authorities and other relevant sectors in the Netherlands. Prior research revealed lacunas in knowledge of and skills related to five elements of the integrated approach of overweight prevention in children (based upon the French EPODE approach), namely political support, parental education, implementation, social marketing and evaluation. CIAO aims to gain theoretical and practical insight of these elements through five sub-studies and to develop, based on these data, a framework for monitoring and evaluation. For this research program, mixed methods are used in all the five sub-studies. First, problem specification through literature research and consultation of stakeholders, experts, health promotion specialists, parents and policy makers will be carried out. Based on this information, models, theoretical frameworks and practical instruments will be developed, tested and evaluated in the communities that implement the integrated approach to prevent overweight in children. Knowledge obtained from these studies and insights from experts and stakeholders will be combined to create an evaluation framework to evaluate the integrated approach at central, local and individual levels that will be applicable to daily practice. This innovative research program stimulates sub-studies to collaborate with local stakeholders and to share and integrate their knowledge, methodology and results. Therefore, the output of this program (both knowledge and practical tools) will be matched and form building blocks of a blueprint for a local evidence- and practice-based integrated approach towards prevention of overweight in children. The output will then support various communities to

  20. Monitoring and evaluation of policy instruments to support renewable electricity in EU Member States. Summary; Monitoring und Bewertung der Foerderinstrumente fuer Erneuerbare Energien in EU Mitgliedsstaaten. Kurzfassung

    Energy Technology Data Exchange (ETDEWEB)

    Ragwitz, M.; Held, A. [Fraunhofer-Institut fuer Systemtechnik und Innovationsforschung (ISI), Karlsruhe (Germany); Resch, G.; Faber, T.; Huber, C.; Haas, R. [Technische Univ. Wien (AT). Energy Economics Group (EEG)

    2006-09-15

    Policy strategies for the promotion of electricity from renewable energy sources differ significantly among the Member States of the European Union with respect to the amount of additional installed capacity as well as concerning the country-specific support costs. The present report aims to assess the effectiveness and the economic efficiency of the support policies in the EU based on both historical experiences and prospective model-based analysis. The main message of the investigation is that the most effective policy instruments tend to be cost-efficient at the same time. In particular, feed-in tariff systems were identified as a successful instrument for supporting renewable energies in terms of effectiveness and efficiency, whereas quota systems still have to prove themselves in practice. (orig.) [German] Bezueglich des Erfolges bei der Foerderung erneuerbarer Energietraeger im Stromsektor bestehen deutliche Unterschiede zwischen den Mitgliedsstaaten der Europaeischen Union. Dies betrifft sowohl den Zubau an installierter Kapazitaet als auch die laenderspezifischen Foerderkosten des Ausbaus. In diesem Projekt erfolgte eine vergleichende Betrachtung der Wirksamkeit und der oekonomischen Effizienz der Foerderpolitiken in den Laendern der EU basierend auf historischen Erfahrungen als auch auf prospektiven modellbasierten Analysen. Es zeigt sich, dass die wirksamsten Systeme auch haeufig die kostenguenstigsten sind. Insbesondere wird ersichtlich, dass garantierte Einspeisetarife ein sehr erfolgreiches Instrumentarium zur Foerderung erneuerbarer Energien im Stromsektor darstellen, nicht allein bezueglich des generierten Marktwachstums sondern auch im Hinblick auf die oekonomische Effizienz, wogegen Quotensysteme ihre Praxistauglichkeit bezogen auf die genannten Kriterien noch nachweisen muessen. (orig.)

  1. Integrating SAR and derived products into operational volcano monitoring and decision support systems

    Science.gov (United States)

    Meyer, F. J.; McAlpin, D. B.; Gong, W.; Ajadi, O.; Arko, S.; Webley, P. W.; Dehn, J.

    2015-02-01

    Remote sensing plays a critical role in operational volcano monitoring due to the often remote locations of volcanic systems and the large spatial extent of potential eruption pre-cursor signals. Despite the all-weather capabilities of radar remote sensing and its high performance in monitoring of change, the contribution of radar data to operational monitoring activities has been limited in the past. This is largely due to: (1) the high costs associated with radar data; (2) traditionally slow data processing and delivery procedures; and (3) the limited temporal sampling provided by spaceborne radars. With this paper, we present new data processing and data integration techniques that mitigate some of these limitations and allow for a meaningful integration of radar data into operational volcano monitoring decision support systems. Specifically, we present fast data access procedures as well as new approaches to multi-track processing that improve near real-time data access and temporal sampling of volcanic systems with SAR data. We introduce phase-based (coherent) and amplitude-based (incoherent) change detection procedures that are able to extract dense time series of hazard information from these data. For a demonstration, we present an integration of our processing system with an operational volcano monitoring system that was developed for use by the Alaska Volcano Observatory (AVO). Through an application to a historic eruption, we show that the integration of SAR into systems such as AVO can significantly improve the ability of operational systems to detect eruptive precursors. Therefore, the developed technology is expected to improve operational hazard detection, alerting, and management capabilities.

  2. Integrative review of clinical decision support for registered nurses in acute care settings.

    Science.gov (United States)

    Dunn Lopez, Karen; Gephart, Sheila M; Raszewski, Rebecca; Sousa, Vanessa; Shehorn, Lauren E; Abraham, Joanna

    2017-03-01

    To report on the state of the science of clinical decision support (CDS) for hospital bedside nurses. We performed an integrative review of qualitative and quantitative peer-reviewed original research studies using a structured search of PubMed, Embase, Cumulative Index to Nursing and Applied Health Literature (CINAHL), Scopus, Web of Science, and IEEE Xplore (Institute of Electrical and Electronics Engineers Xplore Digital Library). We included articles that reported on CDS targeting bedside nurses and excluded in stages based on rules for titles, abstracts, and full articles. We extracted research design and methods, CDS purpose, electronic health record integration, usability, and process and patient outcomes. Our search yielded 3157 articles. After removing duplicates and applying exclusion rules, 28 articles met the inclusion criteria. The majority of studies were single-site, descriptive or qualitative (43%) or quasi-experimental (36%). There was only 1 randomized controlled trial. The purpose of most CDS was to support diagnostic decision-making (36%), guideline adherence (32%), medication management (29%), and situational awareness (25%). All the studies that included process outcomes (7) and usability outcomes (4) and also had analytic procedures to detect changes in outcomes demonstrated statistically significant improvements. Three of 4 studies that included patient outcomes and also had analytic procedures to detect change showed statistically significant improvements. No negative effects of CDS were found on process, usability, or patient outcomes. Clinical support systems targeting bedside nurses have positive effects on outcomes and hold promise for improving care quality; however, this research is lagging behind studies of CDS targeting medical decision-making in both volume and level of evidence. © The Author 2016. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions

  3. Supporting Building Portfolio Investment and Policy Decision Making through an Integrated Building Utility Data Platform

    Energy Technology Data Exchange (ETDEWEB)

    Aziz, Azizan [Carnegie Mellon Univ., Pittsburgh, PA (United States); Lasternas, Bertrand [Carnegie Mellon Univ., Pittsburgh, PA (United States); Alschuler, Elena [US DOE; View Inc; Loftness, Vivian [Carnegie Mellon Univ., Pittsburgh, PA (United States); Wang, Haopeng [Carnegie Mellon Univ., Pittsburgh, PA (United States); Mo, Yunjeong [Carnegie Mellon Univ., Pittsburgh, PA (United States); Wang, Ting [Carnegie Mellon Univ., Pittsburgh, PA (United States); Zhang, Chenlu [Carnegie Mellon Univ., Pittsburgh, PA (United States); Sharma, Shilpi [Carnegie Mellon; Stevens, Ivana [Carnegie Mellon Univ., Pittsburgh, PA (United States)

    2016-03-18

    The American Recovery and Reinvestment Act stimulus funding of 2009 for smart grid projects resulted in the tripling of smart meters deployment. In 2012, the Green Button initiative provided utility customers with access to their real-time1 energy usage. The availability of finely granular data provides an enormous potential for energy data analytics and energy benchmarking. The sheer volume of time-series utility data from a large number of buildings also poses challenges in data collection, quality control, and database management for rigorous and meaningful analyses. In this paper, we will describe a building portfolio-level data analytics tool for operational optimization, business investment and policy assessment using 15-minute to monthly intervals utility data. The analytics tool is developed on top of the U.S. Department of Energy’s Standard Energy Efficiency Data (SEED) platform, an open source software application that manages energy performance data of large groups of buildings. To support the significantly large volume of granular interval data, we integrated a parallel time-series database to the existing relational database. The time-series database improves on the current utility data input, focusing on real-time data collection, storage, analytics and data quality control. The fully integrated data platform supports APIs for utility apps development by third party software developers. These apps will provide actionable intelligence for building owners and facilities managers. Unlike a commercial system, this platform is an open source platform funded by the U.S. Government, accessible to the public, researchers and other developers, to support initiatives in reducing building energy consumption.

  4. An integrated decision support system for wastewater nutrient recovery and recycling to agriculture

    Science.gov (United States)

    Roy, E. D.; Bomeisl, L.; Cornbrooks, P.; Mo, W.

    2017-12-01

    Nutrient recovery and recycling has become a key research topic within the wastewater engineering and nutrient management communities. Several technologies now exist that can effectively capture nutrients from wastewater, and innovation in this area continues to be an important research pursuit. However, practical nutrient recycling solutions require more than capable nutrient capture technologies. We also need to understand the role that wastewater nutrient recovery and recycling can play within broader nutrient management schemes at the landscape level, including important interactions at the nexus of food, energy, and water. We are developing an integrated decision support system that combines wastewater treatment data, agricultural data, spatial nutrient balance modeling, life cycle assessment, stakeholder knowledge, and multi-criteria decision making. Our goals are to: (1) help guide design decisions related to the implementation of sustainable nutrient recovery technology, (2) support innovations in watershed nutrient management that operate at the interface of the built environment and agriculture, and (3) aid efforts to protect aquatic ecosystems while supporting human welfare in a circular nutrient economy. These goals will be realized partly through the assessment of plausible alternative scenarios for the future. In this presentation, we will describe the tool and focus on nutrient balance results for the New England region. These results illustrate that both centralized and decentralized wastewater nutrient recovery schemes have potential to transform nutrient flows in many New England watersheds, diverting wastewater N and P away from aquatic ecosystems and toward local or regional agricultural soils where they can offset a substantial percentage of imported fertilizer. We will also highlight feasibility criteria and next steps to integrate stakeholder knowledge, economics, and life cycle assessment into the tool.

  5. Integrated model for providing tactical emergency medicine support (TEMS): analysis of 120 tactical situations.

    Science.gov (United States)

    Vainionpää, T; Peräjoki, K; Hiltunen, T; Porthan, K; Taskinen, A; Boyd, J; Kuisma, M

    2012-02-01

    Various models for organising tactical emergency medicine support (TEMS) in law enforcement operations exist. In Helsinki, TEMS is organised as an integral part of emergency medical service (EMS) and applied in hostage, siege, bomb threat and crowd control situations and in other tactical situations after police request. Our aim was to analyse TEMS operations, patient profile, and the level of on-site care provided. We conducted a retrospective cohort study of TEMS operations in Helsinki from 2004 to 2009. Data were retrieved from EMS, hospital and dispatching centre files and from TEMS reports. One hundred twenty TEMS operations were analysed. Median time from dispatching to arrival on scene was 10 min [Interquartile Range (IQR) 7-14]. Median duration of operations was 41 min (IQR 19-63). Standby was the only activity in 72 operations, four patients were dead on arrival, 16 requests were called off en route and patient examination or care was needed in 28 operations. Twenty-eight patients (records retrieved) were alive on arrival and were classified as trauma (n = 12) or medical (n = 16). Of traumas, two sustained a gunshot wound, one sustained a penetrating abdominal wound, three sustained medium severity injuries and nine sustained minor injuries. There was neither on-scene nor in-hospital mortality among patients who were alive on arrival. The level of on-site care performed was basic life support in all cases. The results showed that TEMS integrated to daily EMS services including safe zone working only was a feasible, rapid and efficient way to provide medical support to law enforcement operations. © 2011 The Authors Acta Anaesthesiologica Scandinavica © 2011 The Acta Anaesthesiologica Scandinavica Foundation.

  6. An integrated health sector response to violence against women in Malaysia: lessons for supporting scale up

    Directory of Open Access Journals (Sweden)

    Colombini Manuela

    2012-07-01

    Full Text Available Abstract Background Malaysia has been at the forefront of the development and scale up of One-Stop Crisis Centres (OSCC - an integrated health sector model that provides comprehensive care to women and children experiencing physical, emotional and sexual abuse. This study explored the strengths and challenges faced during the scaling up of the OSCC model to two States in Malaysia in order to identify lessons for supporting successful scale-up. Methods In-depth interviews were conducted with health care providers, policy makers and key informants in 7 hospital facilities. This was complemented by a document analysis of hospital records and protocols. Data were coded and analysed using NVivo 7. Results The implementation of the OSCC model differed between hospital settings, with practise being influenced by organisational systems and constraints. Health providers generally tried to offer care to abused women, but they are not fully supported within their facility due to lack of training, time constraints, limited allocated budget, or lack of referral system to external support services. Non-specialised hospitals in both States struggled with a scarcity of specialised staff and limited referral options for abused women. Despite these challenges, even in more resource-constrained settings staff who took the initiative found it was possible to adapt to provide some level of OSCC services, such as referring women to local NGOs or community support groups, or training nurses to offer basic counselling. Conclusions The national implementation of OSCC provides a potentially important source of support for women experiencing violence. Our findings confirm that pilot interventions for health sector responses to gender based violence can be scaled up only when there is a sound health infrastructure in place – in other words a supportive health system. Furthermore, the successful replication of the OSCC model in other similar settings requires that the

  7. The NIAID Division of AIDS enterprise information system: integrated decision support for global clinical research programs

    Science.gov (United States)

    Gupta, Nitin; Varghese, Suresh; Virkar, Hemant

    2011-01-01

    The National Institute of Allergy and Infectious Diseases (NIAID) Division of AIDS (DAIDS) Enterprise Information System (DAIDS-ES) is a web-based system that supports NIAID in the scientific, strategic, and tactical management of its global clinical research programs for HIV/AIDS vaccines, prevention, and therapeutics. Different from most commercial clinical trials information systems, which are typically protocol-driven, the DAIDS-ES was built to exchange information with those types of systems and integrate it in ways that help scientific program directors lead the research effort and keep pace with the complex and ever-changing global HIV/AIDS pandemic. Whereas commercially available clinical trials support systems are not usually disease-focused, DAIDS-ES was specifically designed to capture and incorporate unique scientific, demographic, and logistical aspects of HIV/AIDS treatment, prevention, and vaccine research in order to provide a rich source of information to guide informed decision-making. Sharing data across its internal components and with external systems, using defined vocabularies, open standards and flexible interfaces, the DAIDS-ES enables NIAID, its global collaborators and stakeholders, access to timely, quality information about NIAID-supported clinical trials which is utilized to: (1) analyze the research portfolio, assess capacity, identify opportunities, and avoid redundancies; (2) help support study safety, quality, ethics, and regulatory compliance; (3) conduct evidence-based policy analysis and business process re-engineering for improved efficiency. This report summarizes how the DAIDS-ES was conceptualized, how it differs from typical clinical trial support systems, the rationale for key design choices, and examples of how it is being used to advance the efficiency and effectiveness of NIAID's HIV/AIDS clinical research programs. PMID:21816958

  8. Social support networks and eating disorders: an integrative review of the literature

    Directory of Open Access Journals (Sweden)

    Leonidas C

    2014-05-01

    Full Text Available Carolina Leonidas, Manoel Antônio dos Santos Department of Psychology, Faculty of Philosophy, Sciences and Letters of Ribeirão Preto, University of São Paulo, Brazil Aims: This study aimed to analyze the scientific literature about social networks and social support in eating disorders (ED. Methods: By combining keywords, an integrative review was performed. It included publications from 2006–2013, retrieved from the MEDLINE, LILACS, PsycINFO, and CINAHL databases. The selection of articles was based on preestablished inclusion and exclusion criteria. Results: A total of 24 articles were selected for data extraction. There was a predominance of studies that used nonexperimental and descriptive designs, and which were published in international journals. This review provided evidence of the fact that fully consolidated literature regarding social support and social networks in patients with ED is not available, given the small number of studies dedicated to the subject. We identified evidence that the family social network of patients with ED has been widely explored by the literature, although there is a lack of studies about other networks and sources of social support outside the family. Conclusion: The evidence presented in this study shows the need to include other social networks in health care. This expansion beyond family networks would include significant others – such as friends, colleagues, neighbors, people from religious groups, among others – who could help the individual coping with the disorder. The study also highlights the need for future research on this topic, as well as a need for greater investment in publications on the various dimensions of social support and social networks. Keywords: eating disorders, social networks, social support, family relations, peer relations

  9. Integrated Logistics Support Plan (ILSP) for the Ports and Waterways Safety System (PAWSS) Project - A Level I Major Acquisition

    Science.gov (United States)

    1997-09-30

    This Integrated Logistics Support Plan (ILSP) serves as the master logistics planning document that describes necessary logistic activities, assigns responsibility for those activities, and establishes a schedule for completion. It is one of the init...

  10. Global Positioning System (GPS) Receiver Autonomous Integrity Monitoring (RAIM) web service to support Area Navigation (RNAV) flight planning

    Science.gov (United States)

    2008-01-28

    The Volpe Center designed, implemented, and deployed a Global Positioning System (GPS) Receiver Autonomous Integrity Monitoring (RAIM) prediction system in the mid 1990s to support both Air Force and Federal Aviation Administration (FAA) use of TSO C...

  11. Strategies and Decision Support Systems for Integrating Variable Energy Resources in Control Centers for Reliable Grid Operations

    Energy Technology Data Exchange (ETDEWEB)

    Jones, Lawrence E. [Alstom Grid Inc., Washington, DC (United States)

    2011-11-01

    This report provides findings from the field regarding the best ways in which to guide operational strategies, business processes and control room tools to support the integration of renewable energy into electrical grids.

  12. Strategies and Decision Support Systems for Integrating Variable Energy Resources in Control Centers for Reliable Grid Operations. Executive Summary

    Energy Technology Data Exchange (ETDEWEB)

    Jones, Lawrence E. [Alstom Grid, Inc., Washington, DC (United States)

    2011-11-01

    This is the executive summary for a report that provides findings from the field regarding the best ways in which to guide operational strategies, business processes and control room tools to support the integration of renewable energy into electrical grids.

  13. Using tablets to support self-regulated learning in a longitudinal integrated clerkship

    Directory of Open Access Journals (Sweden)

    Dylan Archbold Hufty Alegría

    2014-03-01

    Full Text Available Introduction: The need to train physicians committed to learning throughout their careers has prompted medical schools to encourage the development and practice of self-regulated learning by students. Longitudinal integrated clerkships (LICs require students to exercise self-regulated learning skills. As mobile tools, tablets can potentially support self-regulation among LIC students. Methods: We provided 15 LIC students with tablet computers with access to the electronic health record (EHR, to track their patient cohort, and a multiplatform online notebook, to support documentation and retrieval of self-identified clinical learning issues. Students received a 1-hour workshop on the relevant features of the tablet and online notebook. Two focus groups with the students were used to evaluate the program, one early and one late in the year and were coded by two raters. Results: Students used the tablet to support their self-regulated learning in ways that were unique to their learning styles and increased access to resources and utilization of down-time. Students who used the tablet to self-monitor and target learning demonstrated the utility of tablets as learning tools. Conclusions: LICs are environments rich in opportunity for self-regulated learning. Tablets can enhance students’ ability to develop and employ self-regulatory skills in a clinical context.

  14. Using tablets to support self-regulated learning in a longitudinal integrated clerkship.

    Science.gov (United States)

    Alegría, Dylan Archbold Hufty; Boscardin, Christy; Poncelet, Ann; Mayfield, Chandler; Wamsley, Maria

    2014-01-01

    The need to train physicians committed to learning throughout their careers has prompted medical schools to encourage the development and practice of self-regulated learning by students. Longitudinal integrated clerkships (LICs) require students to exercise self-regulated learning skills. As mobile tools, tablets can potentially support self-regulation among LIC students. We provided 15 LIC students with tablet computers with access to the electronic health record (EHR), to track their patient cohort, and a multiplatform online notebook, to support documentation and retrieval of self-identified clinical learning issues. Students received a 1-hour workshop on the relevant features of the tablet and online notebook. Two focus groups with the students were used to evaluate the program, one early and one late in the year and were coded by two raters. Students used the tablet to support their self-regulated learning in ways that were unique to their learning styles and increased access to resources and utilization of down-time. Students who used the tablet to self-monitor and target learning demonstrated the utility of tablets as learning tools. LICs are environments rich in opportunity for self-regulated learning. Tablets can enhance students' ability to develop and employ self-regulatory skills in a clinical context.

  15. Integrated Multimedia Based Intelligent Group Decision Support System for Electrical Power Network

    Directory of Open Access Journals (Sweden)

    Ajay Kumar Saxena

    2002-05-01

    Full Text Available Electrical Power Network in recent time requires an intelligent, virtual environment based decision process for the coordination of all its individual elements and the interrelated tasks. Its ultimate goal is to achieve maximum productivity and efficiency through the efficient and effective application of generation, transmission, distribution, pricing and regulatory systems. However, the complexity of electrical power network and the presence of conflicting multiple goals and objectives postulated by various groups emphasized the need of an intelligent group decision support system approach in this field. In this paper, an Integrated Multimedia based Intelligent Group Decision Support System (IM1GDSS is presented, and its main components are analyzed and discussed. In particular attention is focused on the Data Base, Model Base, Central Black Board (CBB and Multicriteria Futuristic Decision Process (MFDP module. The model base interacts with Electrical Power Network Load Forecasting and Planning (EPNLFP Module; Resource Optimization, Modeling and Simulation (ROMAS Module; Electrical Power Network Control and Evaluation Process (EPNCAEP Module, and MFDP Module through CBB for strategic planning, management control, operational planning and transaction processing. The richness of multimedia channels adds a totally new dimension in a group decision making for Electrical Power Network. The proposed IMIGDSS is a user friendly, highly interactive group decision making system, based on efficient intelligent and multimedia communication support for group discussions, retrieval of content and multi criteria decision analysis.

  16. The Support Educational Commitee Participation in the Pedagogical Approach of an Educational Integration

    Directory of Open Access Journals (Sweden)

    Angélica Fontana-Hernández

    2010-10-01

    Full Text Available Educational services are essential to social and economical development of people, mainly to the progress of all sectors of society. Establishing actions that can promote the participation of various social groups is essential to improve their quality of life and building more respectful and fair human rights without any discrimination or exclusion. In recent years, the Costa Rican education system has undergone significant changes due to the pedagogical approach of inclusive education in which students with educational needs may require different support and specialized resources for training and development. For this, the Basic Educational Division of the Center for Teaching and Research in Education, generated a concern of investigating the participation of the Committee of Educational Support in the process of educational integration, thus, determine the functions performed in the educational context, under the rules of the 7600 Equal Opportunity Act for people with disabilities, which is the entity that corresponds to regulate access to education by identifying the support required for students with educational needs and, advice and trains, administrative staff in schools both public and private in the country. In addition, there is also a concern for exploring the role of the Special Education teacher for this Committee, as well as learning the perceptions of teachers and parents about the functions performed by the committee.

  17. The Integrated Medical Model: A Risk Assessment and Decision Support Tool for Space Flight Medical Systems

    Science.gov (United States)

    Kerstman, Eric; Minard, Charles; Saile, Lynn; deCarvalho, Mary Freire; Myers, Jerry; Walton, Marlei; Butler, Douglas; Iyengar, Sriram; Johnson-Throop, Kathy; Baumann, David

    2009-01-01

    The Integrated Medical Model (IMM) is a decision support tool that is useful to mission planners and medical system designers in assessing risks and designing medical systems for space flight missions. The IMM provides an evidence based approach for optimizing medical resources and minimizing risks within space flight operational constraints. The mathematical relationships among mission and crew profiles, medical condition incidence data, in-flight medical resources, potential crew functional impairments, and clinical end-states are established to determine probable mission outcomes. Stochastic computational methods are used to forecast probability distributions of crew health and medical resource utilization, as well as estimates of medical evacuation and loss of crew life. The IMM has been used in support of the International Space Station (ISS) medical kit redesign, the medical component of the ISS Probabilistic Risk Assessment, and the development of the Constellation Medical Conditions List. The IMM also will be used to refine medical requirements for the Constellation program. The IMM outputs for ISS and Constellation design reference missions will be presented to demonstrate the potential of the IMM in assessing risks, planning missions, and designing medical systems. The implementation of the IMM verification and validation plan will be reviewed. Additional planned capabilities of the IMM, including optimization techniques and the inclusion of a mission timeline, will be discussed. Given the space flight constraints of mass, volume, and crew medical training, the IMM is a valuable risk assessment and decision support tool for medical system design and mission planning.

  18. RODOS and RESY: two integrated real time on-line decision support systems for nuclear emergencies

    International Nuclear Information System (INIS)

    Ehrhardt, J.; Fischer, F.; Paesler-Sauer, J.; Schuele, O.; Benz, G.; Rafat, M.

    1993-01-01

    Based on the experience gained with the development of the German real-time system RESY for near range and early phase decision support KfK has developed the hardware and software framework of RODOS, the EC real-time on-line decision support system for nuclear emergencies. The first prototype version of RODOS incorporates models for atmospheric dispersion, for external and internal dose and dose-rate assessments, for simulating sheltering, evacuation and milk interdiction, for estimating health effects and economic costs, and for evaluating action alternatives by means of a rule based system containing components of multi-attribute value techniques. The specially designed operating system has been developed on the basis of the client-server model as a transportable package to run on workstations with a standard based UNIX operating system, and an X-Window system. One of its key features is the support of integrated external software products developed by the contractors by providing standardized services, such as system control, data management and graphical presentation. A data base of geographical structures (e.g. landscape, buildings, traffic network) with an accuracy of 30 m stored as vector data and population distribution stored in a 1 kmx1 km grid allows the presentation and evaluation of results down to a high local resolution by a special graphics subsystem. (orig./DG)

  19. Using tablets to support self-regulated learning in a longitudinal integrated clerkship

    Science.gov (United States)

    Alegría, Dylan Archbold Hufty; Boscardin, Christy; Poncelet, Ann; Mayfield, Chandler; Wamsley, Maria

    2014-01-01

    Introduction The need to train physicians committed to learning throughout their careers has prompted medical schools to encourage the development and practice of self-regulated learning by students. Longitudinal integrated clerkships (LICs) require students to exercise self-regulated learning skills. As mobile tools, tablets can potentially support self-regulation among LIC students. Methods We provided 15 LIC students with tablet computers with access to the electronic health record (EHR), to track their patient cohort, and a multiplatform online notebook, to support documentation and retrieval of self-identified clinical learning issues. Students received a 1-hour workshop on the relevant features of the tablet and online notebook. Two focus groups with the students were used to evaluate the program, one early and one late in the year and were coded by two raters. Results Students used the tablet to support their self-regulated learning in ways that were unique to their learning styles and increased access to resources and utilization of down-time. Students who used the tablet to self-monitor and target learning demonstrated the utility of tablets as learning tools. Conclusions LICs are environments rich in opportunity for self-regulated learning. Tablets can enhance students’ ability to develop and employ self-regulatory skills in a clinical context. PMID:24646438

  20. Operator decision support system for integrated wastewater management including wastewater treatment plants and receiving water bodies.

    Science.gov (United States)

    Kim, Minsoo; Kim, Yejin; Kim, Hyosoo; Piao, Wenhua; Kim, Changwon

    2016-06-01

    An operator decision support system (ODSS) is proposed to support operators of wastewater treatment plants (WWTPs) in making appropriate decisions. This system accounts for water quality (WQ) variations in WWTP influent and effluent and in the receiving water body (RWB). The proposed system is comprised of two diagnosis modules, three prediction modules, and a scenario-based supporting module (SSM). In the diagnosis modules, the WQs of the influent and effluent WWTP and of the RWB are assessed via multivariate analysis. Three prediction modules based on the k-nearest neighbors (k-NN) method, activated sludge model no. 2d (ASM2d) model, and QUAL2E model are used to forecast WQs for 3 days in advance. To compare various operating alternatives, SSM is applied to test various predetermined operating conditions in terms of overall oxygen transfer coefficient (Kla), waste sludge flow rate (Qw), return sludge flow rate (Qr), and internal recycle flow rate (Qir). In the case of unacceptable total phosphorus (TP), SSM provides appropriate information for the chemical treatment. The constructed ODSS was tested using data collected from Geumho River, which was the RWB, and S WWTP in Daegu City, South Korea. The results demonstrate the capability of the proposed ODSS to provide WWTP operators with more objective qualitative and quantitative assessments of WWTP and RWB WQs. Moreover, the current study shows that ODSS, using data collected from the study area, can be used to identify operational alternatives through SSM at an integrated urban wastewater management level.

  1. Technology Roadmap on Instrumentation, Control, and Human-Machine Interface to Support DOE Advanced Nuclear Energy Programs

    International Nuclear Information System (INIS)

    Donald D Dudenhoeffer; Burce P Hallbert

    2007-01-01

    Instrumentation, Controls, and Human-Machine Interface (ICHMI) technologies are essential to ensuring delivery and effective operation of optimized advanced Generation IV (Gen IV) nuclear energy systems. In 1996, the Watts Bar I nuclear power plant in Tennessee was the last U.S. nuclear power plant to go on line. It was, in fact, built based on pre-1990 technology. Since this last U.S. nuclear power plant was designed, there have been major advances in the field of ICHMI systems. Computer technology employed in other industries has advanced dramatically, and computing systems are now replaced every few years as they become functionally obsolete. Functional obsolescence occurs when newer, more functional technology replaces or supersedes an existing technology, even though an existing technology may well be in working order. Although ICHMI architectures are comprised of much of the same technology, they have not been updated nearly as often in the nuclear power industry. For example, some newer Personal Digital Assistants (PDAs) or handheld computers may, in fact, have more functionality than the 1996 computer control system at the Watts Bar I plant. This illustrates the need to transition and upgrade current nuclear power plant ICHMI technologies

  2. Building a bridge for integrating Chinese medicine into conventional healthcare: observations drawn from the development of the Chinese quality of life instrument.

    Science.gov (United States)

    Zhao, Li; Chan, Kelvin

    2005-01-01

    This paper describes the methods and theories of patient-reported outcomes, in particular to the health-related quality of life recently applied in Chinese medicine research. It begins with an investigation of the reasons for a patient-reported outcomes measure for Chinese medicine and the development of a new health-related quality of life instrument based on Chinese culture and Chinese medicine. Discussions on the importance and application of patient-reported outcomes as well as the relationship between quality of life and Chinese medicine are at the focus of this paper. Through a description of the Chinese Quality of Life Instrument and its development, the present work demonstrates an evidence-based approach using patient-reported outcomes or health-related quality of life measures to evaluate treatment efficacy of Chinese medicine, and thereby build a bridge for the integration of Chinese medicine into mainstream health care.

  3. How to Support the Integrate Management System through an Enterprise Content Management Platform?

    International Nuclear Information System (INIS)

    Couvreur, D.

    2016-01-01

    Full text: In 2010 the Belgian Nuclear Research Centre SCK-CEN decided to implement an ECM platform in order to manage its information. The main objectives were to centralize in one place all the right and latest versions of information, to improve the usage of internal information and to enhance the efficiency of our activities by standardization and by supporting document management processes. A programme of document migration for the whole institute was set up per group, running over four years. Steps were foreseen such as the comprehension of the activities of the end users in order to increase their efficiency, the analysis of type of documentation, the technical aspects, the migration of documents itself, the training and the most important steps—communication and supporting people to change. In 2013 SCK-CEN decided to implement an Integrated Management System. The objectives were i) to improve the safety performance of the organisation, ii) to foster, strengthen and support a strong safety and organizational culture through the development and reinforcement of good safety attitudes and behaviour in individuals and teams, iii) to structure, but at the same time simplify and make more transparent all processes of SCK-CEN clearly defining responsibilities and authorities, iv) to automate these processes by workflows and support the information and data flow by relevant databases. Intrinsically, both initiatives have the same end objective being the safety of the installations, of the knowledge and transfer of know-how on processes and projects related to radiation protection, reactor technology, waste and disposal, dismantling. In this paper, we will explain through examples. (author

  4. Economic and legal aspects of introducing novel ICT instruments: integrating sound into social media marketing - from audio branding to soundscaping

    OpenAIRE

    Daj, A.

    2013-01-01

    The pervasive expansion and implementation of ICT based marketing instruments imposes a new economic investigation of business models and regulatory solutions. Moreover, the current status of Social Media research indicates that the use of social networking and collaboration technologies is deeply changing the way people communicate, consume and cooperate with each other. Against the backdrop of widespread availability of digital audio-video content and the growing number of “smart” mobile de...

  5. Portable instrument that integrates irradiation with fluorescence and reflectance spectroscopies during clinical photodynamic therapy of cutaneous disease

    Science.gov (United States)

    Cottrell, W. J.; Oseroff, A. R.; Foster, T. H.

    2006-06-01

    We report a portable clinical instrument for delivering photodynamic therapy (PDT) while performing noninvasive spectroscopic monitoring in vivo. Using an off-surface probe, the instrument delivers the treatment beam to a user-defined field on the skin and performs reflectance and fluorescence spectroscopies at two regions within this field. The instrument is being used to monitor photosensitizer fluorescence photobleaching, fluorescent photoproduct kinetics, blood volume, and hemoglobin oxygen saturation during a pilot clinical trial of 5-aminolevulinic acid-PDT treatment of superficial basal cell carcinoma (BCC). Protoporphyrin IX and photoproduct fluorescence excited by the 633nm PDT treatment laser is collected between 655 and 800nm. During a series of brief treatment interruptions at programable time points, white light reflectance spectra between 475 and 800nm are acquired. Fluorescence spectra are corrected for the effects of absorption and scattering, informed by the reflectance measurements, and then decomposed into known fluorophore contributions in real time using a robust singular value decomposition fitting routine. Reflectance spectra additionally provide information on blood volume and hemoglobin oxygen saturation. Monitoring blood oxygenation and implicit dose metrics such as photosensitizer photobleaching during PDT allows the improved interpretation of clinical results and is helping to guide the treatment protocol for an anticipated low-irradiance PDT clinical trial of BCC.

  6. Eva between anxiety and hope: integrating anthroposophic music therapy in supportive oncology care

    Directory of Open Access Journals (Sweden)

    Eran Ben-Arye

    2015-11-01

    Full Text Available Music therapy is a significant modality in the treatment of patients with cancer, who suffer emotional and spiritual distress as well as chemotherapy side effects that impair their quality of life. In this article, we present a case study of a patient challenged with recurrent ovarian cancer who received, concomitant with chemotherapy, a special form of music therapy based on anthroposophic medicine (AM aimed at alleviating anxiety and improving her general well-being. AM-centered music therapy goals are discussed in regard to two modes of treatment: receptive listening and clinical composition. Next, these two treatment modes are discussed in a broader context by reviewing conventional music therapy interventions during chemotherapy on two axes: a. standardized vs. individualized treatment; b. patient’s involvement on a passive to active continuum. In conclusion, psycho-oncology care can be enriched by adding anthroposophic medicine-oriented music therapy integrated within patients’ supportive care.

  7. Decision Support For Digester Algae Integration For Improved Environmental And Economic Sustainability

    Energy Technology Data Exchange (ETDEWEB)

    2017-06-28

    The Idaho National Laboratory (INL) has teamed with University of Idaho and Boise State University to make the use of ADs more attractive by implementing a two-stage AD and coupling additional processes to the system. The addition of a polyhydroxyalkanoate (PHA) reactor, algae cultivation system, and a biomass treatment system such as fast-pyrolysis or hydrothermal liquefaction (HTL) would further sequester carbon and nutrients, as well as add valuable products that can be sold or used on-site to mitigate costs. The Decision-support for Digester-Algae IntegRation for Improved Environmental and Economic Sustainability (DAIRIEES) technoeconomic model will play a key role in evaluating the effectiveness and viability of this system to achieve economic and environmental sustainability by the dairy industry.

  8. Cultural sensitivity and supportive expressive psychotherapy: an integrative approach to treatment.

    Science.gov (United States)

    White, Tracela M; Gibbons, Mary Beth Connolly; Schamberger, Megan

    2006-01-01

    Cultural sensitivity is a concept that has become increasingly important in psychotherapy research and practice. In response to the growing ethnic minority population and the increased demand for psychological services among minority clients, many therapists and researchers have attempted to identify competencies and guidelines for providing culturally sensitive approaches to treatment. However, many cultural sensitivity concepts are theoretical and have rarely been integrated into an established psychotherapeutic framework. The purpose of this manuscript is to operationalize the concepts of cultural sensitivity into specific therapeutic techniques using a manual-guided Supportive Expressive Psychotherapy approach. Developing these strategies may serve to further assist therapists with the delivery of mental health services to ethnic minority clients.

  9. Underground coal gasification with integrated carbon dioxide mitigation supports Bulgaria's low carbon energy supply

    Science.gov (United States)

    Nakaten, Natalie; Kempka, Thomas; Azzam, Rafig

    2013-04-01

    Underground coal gasification allows for the utilisation of coal reserves that are economically not exploitable due to complex geological boundary conditions. The present study investigates underground coal gasification as a potential economic approach for conversion of deep-seated coals into a high-calorific synthesis gas to support the Bulgarian energy system. Coupling of underground coal gasification providing synthesis gas to fuel a combined cycle gas turbine with carbon capture and storage is considered to provide substantial benefits in supporting the Bulgarian energy system with a competitive source of energy. In addition, underground voids originating from coal consumption increase the potential for geological storage of carbon dioxide resulting from the coupled process of energy production. Cost-effectiveness, energy consumption and carbon dioxide emissions of this coupled process are investigated by application of a techno-economic model specifically developed for that purpose. Capital (CAPEX) and operational expenditure (OPEX) are derived from calculations using six dynamic sub-models describing the entire coupled process and aiming at determination of the levelised costs of electricity generation (COE). The techno-economic model is embedded into an energy system-modelling framework to determine the potential integration of the introduced low carbon energy production technology into the Bulgarian energy system and its competitiveness at the energy market. For that purpose, boundary conditions resulting from geological settings as well as those determined by the Bulgarian energy system and its foreseeable future development have to be considered in the energy system-modelling framework. These tasks comprise integration of the present infrastructure of the Bulgarian energy production and transport system. Hereby, the knowledge on the existing power plant stock and its scheduled future development are of uttermost importance, since only phasing-out power

  10. Integrated quantitative and qualitative workflow for in vivo bioanalytical support in drug discovery using hybrid Q-TOF-MS.

    Science.gov (United States)

    Ranasinghe, Asoka; Ramanathan, Ragu; Jemal, Mohammed; D'Arienzo, Celia J; Humphreys, W Griffith; Olah, Timothy V

    2012-03-01

    UHPLC coupled with orthogonal acceleration hybrid quadrupole-TOF (Q-TOF)-MS is an emerging technique offering new strategies for the efficient screening of new chemical entities and related molecules at the early discovery stage within the pharmaceutical industry. In the first part of this article, we examine the main instrumental parameters that are critical for the integration of UHPLC-Q-TOF technology to existing bioanalytical workflows, in order to provide simultaneous quantitative and qualitative bioanalysis of samples generated following in vivo studies. Three modern Q-TOF mass spectrometers, including Bruker maXis™, Agilent 6540 and Sciex TripleTOF™ 5600, all interfaced with UHPLC systems, are evaluated in the second part of the article. The scope of this work is to demonstrate the potential of Q-TOF for the analysis of typical small molecules, therapeutic peptides (molecular weight <6000 Da), and enzymatically (i.e., trypsin, chymotrypsin and pepsin) cleaved peptides from larger proteins. This work focuses mainly on full-scan TOF data obtained under ESI conditions, the major mode of TOF operation in discovery bioanalytical research, where the compounds are selected based on their pharmacokinetic/pharmacodynamic behaviors using animal models prior to selecting a few desirable candidates for further development. Finally, important emerging TOF technologies that could potentially benefit bioanalytical research in the semi-quantification of metabolites without synthesized standards are discussed. Particularly, the utility of captive spray ionization coupled with TripleTOF 5600 was evaluated for improving sensitivity and providing normalized MS response for drugs and their metabolites. The workflow proposed compromises neither the efficiency, nor the quality of pharmacokinetic data in support of early drug discovery programs.

  11. Integrating Brazilian health information systems in order to support the building of data warehouses

    Directory of Open Access Journals (Sweden)

    Sergio Miranda Freire

    Full Text Available AbstractIntroductionThis paper's aim is to develop a data warehouse from the integration of the files of three Brazilian health information systems concerned with the production of ambulatory and hospital procedures for cancer care, and cancer mortality. These systems do not have a unique patient identification, which makes their integration difficult even within a single system.MethodsData from the Brazilian Public Hospital Information System (SIH-SUS, the Oncology Module for the Outpatient Information System (APAC-ONCO and the Mortality Information System (SIM for the State of Rio de Janeiro, in the period from January 2000 to December 2004 were used. Each of the systems has the monthly data production compiled in dbase files (dbf. All the files pertaining to the same system were then read into a corresponding table in a MySQL Server 5.1. The SIH-SUS and APAC-ONCO tables were linked internally and with one another through record linkage methods. The APAC-ONCO table was linked to the SIM table. Afterwards a data warehouse was built using Pentaho and the MySQL database management system.ResultsThe sensitivities and specificities of the linkage processes were above 95% and close to 100% respectively. The data warehouse provided several analytical views that are accessed through the Pentaho Schema Workbench.ConclusionThis study presented a proposal for the integration of Brazilian Health Systems to support the building of data warehouses and provide information beyond those currently available with the individual systems.

  12. Supporting international development through the integration of relevant 'soft-skills' into geoscience education

    Science.gov (United States)

    Gill, Joel C.

    2014-05-01

    Geologists have an important role to play in international development, improving disaster risk reduction and access to clean water, sanitation, infrastructure, and natural resources. That geologists can contribute to international development is well established. Less so, however, is an understanding of the 'soft' skills required to do this effectively. The fight against global poverty requires an integrated and interdisciplinary approach, demanding a host of skills other than technical geology. Factors such as cultural understanding, cross disciplinary communication, diplomacy, community mobilisation and participation are all aspects that, if lacking, may result in a project failing to have maximum impact. Whilst project success may be highly dependent on these skills and aspects of knowledge, opportunities to develop them throughout a geologist's education are not common. Through a discussion of two case studies (based on water and hazards work), this study seeks to demonstrate the value of an integrated approach and the skills that geologists should invest in at an early stage of their career. It proceeds to examine a range of practical ways by which geology students can develop these skills during and after their education. A number of these opportunities are currently being utilised by Geology for Global Development (GfGD), a not-for-profit organisation working in the UK to support young geoscientists to make a long-term and effective contribution to international development.

  13. Integration of evidence-based practice in bedside teaching paediatrics supported by e-learning.

    Science.gov (United States)

    Potomkova, Jarmila; Mihal, Vladimir; Zapletalova, Jirina; Subova, Dana

    2010-03-01

    Bedside teaching with evidence-based practice elements, supported by e-learning activities, can play an important role in modern medical education. Teachers have to incorporate evidence from the medical literature to increase student motivation and interactivity. An integral part of the medical curricula at Palacky University Olomouc (Czech Republic) are real paediatric scenarios supplemented with a review of current literature to enhance evidence-based bedside teaching & learning. Searching for evidence is taught through librarian-guided interactive hands-on sessions and/or web-based tutorials followed by clinical case presentations and feedback. Innovated EBM paediatric clerkship demonstrated students' preferences towards web-based interactive bedside teaching & learning. In two academic years (2007/2008, 2008/2009), learning-focused feedback from 106 and 131 students, resp. was obtained about their attitudes towards evidence-based bedside teaching. The assessment included among others the overall level of instruction, quality of practical evidence-based training, teacher willingness and impact of instruction on increased interest in the specialty. There was some criticism about excessive workload. A parallel survey was carried out on the perceived values of different forms of information skills training (i.e. demonstration, online tutorials, and librarian-guided interactive search sessions) and post-training self-reported level of search skills. The new teaching/learning paediatric portfolio is a challenge for further activities, including effective knowledge translation, continuing medical & professional development of teachers, and didactic, clinically integrated teaching approaches.

  14. Integration of Social Aspects in Decision Support, Based on Life Cycle Thinking

    Directory of Open Access Journals (Sweden)

    Pere Fullana-i-Palmer

    2011-03-01

    Full Text Available Recently increasing attention has been paid to complementing environmental Life Cycle Assessment (LCA with social aspects. The paper discusses the selection of social impacts and indicators from existing frameworks like Social Life Cycle Assessment (SLCA and Social Impact Assessment (SIA. Two ongoing case studies, addressing sustainability assessment within decision support, were considered: (1 Integrated Water Resources Management (IWRM in Indonesia; and (2 Integrated Packaging Waste Management in Spain and Portugal (FENIX. The focus was put on social impacts occurring due to decisions within these systems, such as choice of technologies, practices or suppliers. Thus, decision makers—here understood as intended users of the studies’ results—are not consumers that buy (or do not buy a product, such as in recent SLCA case-studies, but mainly institutions that decide about the design of the water or packaging waste management system. Therefore, in the FENIX project, a list of social impacts identified from literature was sent to the intended users to be ranked according to their priorities. Finally, the paper discusses to what extent the entire life cycle is reflected in SLCA impact categories and indicators, and explains how both life-cycle and on-site-related social impacts were chosen to be assessed. However, not all indicators in the two projects will assess all stages of the life cycle, because of their varying relevance in the different stages, data availability and practical interest of decision makers.

  15. Playing together: the role of sport organisations in supporting migrants’ integration

    Directory of Open Access Journals (Sweden)

    Antonio Borgogni

    2015-01-01

    Full Text Available The paper presents the research methodology and the main findings of the study carried out to monitor and assess the UISP –the largest sport for all Italian association– national project named Diritti in campo (Rights in the field. The project had the overall goals to use sport-based programs to support the process of integration of migrants living in eight selected Italian cities. The aims of the research study were: the assessment of the impact of the project on migrants’ social inclusion; the identification of specific determinants for success of a program using sport as main mean of intervention; the proposition of a qualitative methodological approach in the domain of migration studies in Italy. The research methodology was based on the case-study paradigm (Yin, 2009 and combined several tools interpolating direct observations, semi-structured and in-depth interviews, focus groups, and documentary analysis. Based on the main findings of the study, eight specific determinants for success as well as four general organizational determinants were highlighted: the relevance of ludodiversity (Renson, 2004, the changes needed in the organizational culture, the requirement of an entire system of integration built as a network, the management of the spaces.

  16. Total integrated performance excellence system (TIPES): A true north direction for a clinical trial support center.

    Science.gov (United States)

    Sather, Mike R; Parsons, Sherry; Boardman, Kathy D; Warren, Stuart R; Davis-Karim, Anne; Griffin, Kevin; Betterton, Jane A; Jones, Mark S; Johnson, Stanley H; Vertrees, Julia E; Hickey, Jan H; Salazar, Thelma P; Huang, Grant D

    2018-03-01

    This paper presents the quality journey taken by a Federal organization over more than 20 years. These efforts have resulted in the implementation of a Total Integrated Performance Excellence System (TIPES) that combines key principles and practices of established quality systems. The Center has progressively integrated quality system frameworks including the Malcom Baldrige National Quality Award (MBNQA) Framework and Criteria for Performance Excellence, ISO 9001, and the Organizational Project Management Maturity Model (OPM3), as well as supplemental quality systems of ISO 15378 (packaging for medicinal products) and ISO 21500 (guide to project management) to systematically improve all areas of operations. These frameworks were selected for applicability to Center processes and systems, consistency and reinforcement of complimentary approaches, and international acceptance. External validations include the MBNQA, the highest quality award in the US, continued registration and conformance to ISO standards and guidelines, and multiple VA and state awards. With a focus on a holistic approach to quality involving processes, systems and personnel, this paper presents activities and lessons that were critical to building TIPES and establishing the quality environment for conducting clinical research in support of Veterans and national health care.

  17. Total integrated performance excellence system (TIPES: A true north direction for a clinical trial support center

    Directory of Open Access Journals (Sweden)

    Mike R. Sather

    2018-03-01

    Full Text Available This paper presents the quality journey taken by a Federal organization over more than 20 years. These efforts have resulted in the implementation of a Total Integrated Performance Excellence System (TIPES that combines key principles and practices of established quality systems. The Center has progressively integrated quality system frameworks including the Malcom Baldrige National Quality Award (MBNQA Framework and Criteria for Performance Excellence, ISO 9001, and the Organizational Project Management Maturity Model (OPM3, as well as supplemental quality systems of ISO 15378 (packaging for medicinal products and ISO 21500 (guide to project management to systematically improve all areas of operations. These frameworks were selected for applicability to Center processes and systems, consistency and reinforcement of complimentary approaches, and international acceptance. External validations include the MBNQA, the highest quality award in the US, continued registration and conformance to ISO standards and guidelines, and multiple VA and state awards. With a focus on a holistic approach to quality involving processes, systems and personnel, this paper presents activities and lessons that were critical to building TIPES and establishing the quality environment for conducting clinical research in support of Veterans and national health care.

  18. Maintaining a Local Data Integration System in Support of Weather Forecast Operations

    Science.gov (United States)

    Watson, Leela R.; Blottman, Peter F.; Sharp, David W.; Hoeth, Brian

    2010-01-01

    Since 2000, both the National Weather Service in Melbourne, FL (NWS MLB) and the Spaceflight Meteorology Group (SMG) at Johnson Space Center in Houston, TX have used a local data integration system (LDIS) as part of their forecast and warning operations. The original LDIS was developed by NASA's Applied Meteorology Unit (AMU; Bauman et ai, 2004) in 1998 (Manobianco and Case 1998) and has undergone subsequent improvements. Each has benefited from three-dimensional (3-D) analyses that are delivered to forecasters every 15 minutes across the peninsula of Florida. The intent is to generate products that enhance short-range weather forecasts issued in support of NWS MLB and SMG operational requirements within East Central Florida. The current LDIS uses the Advanced Regional Prediction System (ARPS) Data Analysis System (ADAS) package as its core, which integrates a wide variety of national, regional, and local observational data sets. It assimilates all available real-time data within its domain and is run at a finer spatial and temporal resolution than current national- or regional-scale analysis packages. As such, it provides local forecasters with a more comprehensive understanding of evolving fine-scale weather features

  19. An integrated probabilistic risk analysis decision support methodology for systems with multiple state variables

    International Nuclear Information System (INIS)

    Sen, P.; Tan, John K.G.; Spencer, David

    1999-01-01

    Probabilistic risk analysis (PRA) methods have been proven to be valuable in risk and reliability analysis. However, a weak link seems to exist between methods for analysing risks and those for making rational decisions. The integrated decision support system (IDSS) methodology presented in this paper attempts to address this issue in a practical manner. In consists of three phases: a PRA phase, a risk sensitivity analysis (SA) phase and an optimisation phase, which are implemented through an integrated computer software system. In the risk analysis phase the problem is analysed by the Boolean representation method (BRM), a PRA method that can deal with systems with multiple state variables and feedback loops. In the second phase the results obtained from the BRM are utilised directly to perform importance and risk SA. In the third phase, the problem is formulated as a multiple objective decision making problem in the form of multiple objective reliability optimisation. An industrial example is included. The resultant solutions of a five objective reliability optimisation are presented, on the basis of which rational decision making can be explored

  20. Integrated logistic support concept in the design of nuclear power plants

    International Nuclear Information System (INIS)

    Martin-Onraet, M.; Degrave, C.; Meuwisse, C.

    1996-01-01

    Considering its plant operating experience, the analysis of foreign practice and the development of new design approaches and tools, Electricite de France (EDF) is convinced that it is possible to improve new plant design, operation and maintenance without increasing too much investment costs. To remain competitive it is necessary to maintain the kWh production cost of the future unit at a level close to those of the latest unit under construction (N4 series), while raising the Safety level. To minimize the kWh cost EDF has decided to implement the CIDEM project (French acronym for Design Integrating Availability, Operating Experience and Maintenance), an analytic and systematic process for studying new projects, aiming at a design optimization including investment, maintenance, availability and radiation exposure objectives. This approach aims at a single goal: to minimize the kWh production cost incorporating investment operation and fuel cost, based on experience from French and foreign units. This process, already widely practiced in other industries or services (aerospace, defense, ...), uses concepts known by the acronyms RAM (Reliability, Availability, Maintainability) RCM (Reliability, Centered Maintenance) and ILS (Integrated Logistic Support). The first CIDEM application is centered on the future French nuclear unit construction program, known as the REP 2000 program but the approach could be applied to other Reactor type or fossil-fired units in particular for its methodological aspect. The purpose of this paper is to introduce the EDF ILS concept

  1. A dynamic probabilistic safety margin characterization approach in support of Integrated Deterministic and Probabilistic Safety Analysis

    International Nuclear Information System (INIS)

    Di Maio, Francesco; Rai, Ajit; Zio, Enrico

    2016-01-01

    The challenge of Risk-Informed Safety Margin Characterization (RISMC) is to develop a methodology for estimating system safety margins in the presence of stochastic and epistemic uncertainties affecting the system dynamic behavior. This is useful to support decision-making for licensing purposes. In the present work, safety margin uncertainties are handled by Order Statistics (OS) (with both Bracketing and Coverage approaches) to jointly estimate percentiles of the distributions of the safety parameter and of the time required for it to reach these percentiles values during its dynamic evolution. The novelty of the proposed approach consists in the integration of dynamic aspects (i.e., timing of events) into the definition of a dynamic safety margin for a probabilistic Quantification of Margin and Uncertainties (QMU). The system here considered for demonstration purposes is the Lead–Bismuth Eutectic- eXperimental Accelerator Driven System (LBE-XADS). - Highlights: • We integrate dynamic aspects into the definition of a safety margins. • We consider stochastic and epistemic uncertainties affecting the system dynamics. • Uncertainties are handled by Order Statistics (OS). • We estimate the system grace time during accidental scenarios. • We apply the approach to an LBE-XADS accidental scenario.

  2. Comparison of Multi-Criteria Decision Support Methods for Integrated Rehabilitation Prioritization

    Directory of Open Access Journals (Sweden)

    Franz Tscheikner-Gratl

    2017-01-01

    Full Text Available The decisions taken in rehabilitation planning for the urban water networks will have a long lasting impact on the functionality and quality of future services provided by urban infrastructure. These decisions can be assisted by different approaches ranging from linear depreciation for estimating the economic value of the network over using a deterioration model to assess the probability of failure or the technical service life to sophisticated multi-criteria decision support systems. Subsequently, the aim of this paper is to compare five available multi-criteria decision-making (MCDM methods (ELECTRE, AHP, WSM, TOPSIS, and PROMETHEE for the application in an integrated rehabilitation management scheme for a real world case study and analyze them with respect to their suitability to be used in integrated asset management of water systems. The results of the different methods are not equal. This occurs because the chosen score scales, weights and the resulting distributions of the scores within the criteria do not have the same impact on all the methods. Independently of the method used, the decision maker must be familiar with its strengths but also weaknesses. Therefore, in some cases, it would be rational to use one of the simplest methods. However, to check for consistency and increase the reliability of the results, the application of several methods is encouraged.

  3. Examining the Technology Integration Planning Cycle Model of Professional Development to Support Teachers' Instructional Practices

    Science.gov (United States)

    Hutchison, Amy C.; Woodward, Lindsay

    2018-01-01

    Background: Presently, models of professional development aimed at supporting teachers' technology integration efforts are often short and decontextualized. With many schools across the country utilizing standards that require students to engage with digital tools, a situative model that supports building teachers' knowledge within their…

  4. 75 FR 1617 - Draft Toxicological Review of Methanol: In Support of the Summary Information in the Integrated...

    Science.gov (United States)

    2010-01-12

    ... Toxicological Review of Methanol: In Support of the Summary Information in the Integrated Risk Information... external review draft document titled ``Toxicological Review of Methanol: In Support of Summary Information... methanol will be held on February 23, 2010, beginning at 9 a.m. and ending at 4 p.m., Eastern Standard Time...

  5. ANALYSIS OF FINANCIAL INSTRUMENTS THE BASIS SUPPORT THE DEVELOPMENT OF RURAL AREAS AND FISHERIES SECTOR, ROMANIA DURING 2007-2013

    Directory of Open Access Journals (Sweden)

    CHIRCULESCU MARIA FELICIA

    2014-08-01

    Full Text Available This study presents funding opportunities to support investment and rural development and fisheries sector. Adoption of the national program and rural development as a strategic document for implementing European programs meant for rural Romania assumption of an intervention model is based on a medium-term strategy on the development of the village world. The work is based on the analysis of official documents indicating alignment programs of intervention policies in the field and on their analysis of available data that refers to the current state of implementation of programs referring to Romanian rural development. Given that the Common Agricultural Policythe (CAP budget for 2014-2020 is higher than the amounts allocated for the 2007-2013 program, consider that in determining the coordinates of financial allocation for the next year must take into account the problems encountered in previous period to eliminate them, because the efficiency of the implementation of funds to support rural development objectives depends largely on rural transformation internally and reducing disparities in the regions and communities, and externally in relation to Member States of the European Union .

  6. Developing support schemes for electric renewable energy in France: how to reconcile integration and deployment challenges?

    International Nuclear Information System (INIS)

    Mathieu, Mathilde; Ruedinger, Andreas

    2016-01-01

    The reform for a greater integration of support schemes in the electricity market is not a marginal development, and should allow for a transition period for market actors to adapt. Lessons from the experience of neighboring countries will be valuable, especially in view of greater regional harmonization in the future. Better integration of solutions for reducing demand and greater system flexibility would also be advisable going forward. Finally, it is also essential to evaluate the impact of the reform on the risk of electricity market concentration and a reduced diversity of actors; as well as of the potential increase in barriers to entry which could hinder the emergence of collaborative or citizen projects, as these are crucial for improving project acceptance and sharing RES costs. Through stronger exposure to market signals, market premia can assist the technical and economic integration of renewable energy (RES). The resultant advantages in terms of improvements in forecasting and marketing tools, negative price management and support for more valuable technologies and practices in the system closely depends, however, on the precise calibration of the mechanisms involved. To address this, it seems essential to learn from the experiences of neighboring countries and to plan an adequate transition period for all actors to adapt to the change in regulation. The rise in transaction costs and risk premia can lead to additional costs under the new mechanisms. Direct costs, which are linked to the marketing of electricity and to rules aimed at curtailing negative prices, remain limited. However, a cost-benefit analysis must consider the impact of changes in regulation on risk perception and the cost of capital for financing projects - a determinant factor in the economic viability of the project. This further implies a need to consider complementary measures aimed at reducing the financial risks to limit production costs and incremental costs for society. The push

  7. OpenDanubia - An integrated, modular simulation system to support regional water resource management

    Science.gov (United States)

    Muerth, M.; Waldmann, D.; Heinzeller, C.; Hennicker, R.; Mauser, W.

    2012-04-01

    The already completed, multi-disciplinary research project GLOWA-Danube has developed a regional scale, integrated modeling system, which was successfully applied on the 77,000 km2 Upper Danube basin to investigate the impact of Global Change on both the natural and anthropogenic water cycle. At the end of the last project phase, the integrated modeling system was transferred into the open source project OpenDanubia, which now provides both the core system as well as all major model components to the general public. First, this will enable decision makers from government, business and management to use OpenDanubia as a tool for proactive management of water resources in the context of global change. Secondly, the model framework to support integrated simulations and all simulation models developed for OpenDanubia in the scope of GLOWA-Danube are further available for future developments and research questions. OpenDanubia allows for the investigation of water-related scenarios considering different ecological and economic aspects to support both scientists and policy makers to design policies for sustainable environmental management. OpenDanubia is designed as a framework-based, distributed system. The model system couples spatially distributed physical and socio-economic process during run-time, taking into account their mutual influence. To simulate the potential future impacts of Global Change on agriculture, industrial production, water supply, households and tourism businesses, so-called deep actor models are implemented in OpenDanubia. All important water-related fluxes and storages in the natural environment are implemented in OpenDanubia as spatially explicit, process-based modules. This includes the land surface water and energy balance, dynamic plant water uptake, ground water recharge and flow as well as river routing and reservoirs. Although the complete system is relatively demanding on data requirements and hardware requirements, the modular structure

  8. BiodieselFAO: An Integrated Decision Support System for Investment Analysis in the Biodiesel Production Chain

    Directory of Open Access Journals (Sweden)

    Aziz Galvão da Silva Júnior

    2015-06-01

    Full Text Available In the short and medium terms, biofuels are the most viable alternative to reduce the environmental impact of fossil fuels. The recent controversy over the competition between biofuels and food production increases the complexity of investment decisions in the biodiesel production chain. In this context, decision support tools are highly relevant. The purpose of this article is to describe the BiodieselFAO using the Unified Modeling Language (UML. An integrated analysis considering both agricultural and industrial sectors was identified as a key requirement to the system. Therefore, farmers and industry are the main actors in the use case diagram. As the raw material represents around 70% of the industrial cost of biodiesel production, the price negotiation of raw material (oilseeds is the central use case. Configuration, agriculture, industry, results and scenarios are the modules, which encompass the functionalities derived from the UML diagrams. The Food and Agriculture Organization of the United Nations (FAO has made the BiodieselFAO available, free of charge, to around 180 professionals from 17 Latin American countries. Additionally, the developing team has supported the usage of the BiodieselFAO in several biodiesel investment analyses throughout Latin America. The system was also useful in the design and analysis of policy related to biodiesel industry in Brazil.

  9. Supporting teachers integrating web 2.0 in a Problem Based Learning approach

    DEFF Research Database (Denmark)

    Buus, Lillian

    2010-01-01

    Based on theoretical and methodological considerations within problem-based learning (PBL), web 2.0 technologies and learning designs, the article try to illustrate a design model for supporting teachers in their learning design trying to integrate web 2.0 technologies into their PBL approach...... that a transition from curriculum-based teaching to PBL entails a movement from a teacher-centered approach to a learner-centered approach [4],[5]. This move can in many ways be compared to the conceptual move from web 1.0 to web 2.0 that by some is seen as a transition from ‘users/learners as consumers’ towards...... ‘users/learners as producers’ [6]. Consequently, it makes good sense to connect Web 2.0 with a problem-based approach to learning. Therefore it’s interesting to look upon a learning design model supporting teachers at AAU in their pedagogical design combining these two. The Collaborative E...

  10. Structural Integrity Evaluation of the KALIMER-600 Reactor Core Support Structure

    International Nuclear Information System (INIS)

    Park, Chang Gyu; Kim, Jong Bum; Lee, Jae Han

    2005-01-01

    KALIMER-600(Korea Advanced LIquid MEtal Reactor, 600MWe) is a pool type sodium-cooled liquid metal reactor. Since the normal operating temperature of KALIMER-600 is 545 .deg. C, the reactor structures in the hot pool region are designed and evaluated according to the elevated temperature design rules such as the ASME Boiler and Pressure Vessel Code Section III, Subsection NH. Since the core support structure of KALIMER-600 is in the cold pool region under 400 .deg. C, a high temperature inelastic behavior is not expected. Thus the stress and fatigue limits are the main concerns to assure the structural design integrity following the ASME Subsection NG. In this paper, the evaluations of the stress and fatigue damage for the core support structure of KALIMER-600 are carrried out in the case of a normal operation condition using the rules of ASME Subsection NG. To obtain the stress values, a heat transfer analysis and a stress analysis under a combined loading condition are performed. From the stress distribution results, the critical sections are selected and the stress and fatigue limits are evaluated for the selected regions

  11. The Integrated Use of Enterprise and System Dynamics Modelling Techniques in Support of Business Decisions

    Directory of Open Access Journals (Sweden)

    K. Agyapong-Kodua

    2012-01-01

    Full Text Available Enterprise modelling techniques support business process (reengineering by capturing existing processes and based on perceived outputs, support the design of future process models capable of meeting enterprise requirements. System dynamics modelling tools on the other hand are used extensively for policy analysis and modelling aspects of dynamics which impact on businesses. In this paper, the use of enterprise and system dynamics modelling techniques has been integrated to facilitate qualitative and quantitative reasoning about the structures and behaviours of processes and resource systems used by a Manufacturing Enterprise during the production of composite bearings. The case study testing reported has led to the specification of a new modelling methodology for analysing and managing dynamics and complexities in production systems. This methodology is based on a systematic transformation process, which synergises the use of a selection of public domain enterprise modelling, causal loop and continuous simulation modelling techniques. The success of the modelling process defined relies on the creation of useful CIMOSA process models which are then converted to causal loops. The causal loop models are then structured and translated to equivalent dynamic simulation models using the proprietary continuous simulation modelling tool iThink.

  12. Transboundary Water: Improving Methodologies and Developing Integrated Tools to Support Water Security

    Science.gov (United States)

    Hakimdavar, Raha; Wood, Danielle; Eylander, John; Peters-Lidard, Christa; Smith, Jane; Doorn, Brad; Green, David; Hummel, Corey; Moore, Thomas C.

    2018-01-01

    River basins for which transboundary coordination and governance is a factor are of concern to US national security, yet there is often a lack of sufficient data-driven information available at the needed time horizons to inform transboundary water decision-making for the intelligence, defense, and foreign policy communities. To address this need, a two-day workshop entitled Transboundary Water: Improving Methodologies and Developing Integrated Tools to Support Global Water Security was held in August 2017 in Maryland. The committee that organized and convened the workshop (the Organizing Committee) included representatives from the National Aeronautics and Space Administration (NASA), the US Army Corps of Engineers Engineer Research and Development Center (ERDC), and the US Air Force. The primary goal of the workshop was to advance knowledge on the current US Government and partners' technical information needs and gaps to support national security interests in relation to transboundary water. The workshop also aimed to identify avenues for greater communication and collaboration among the scientific, intelligence, defense, and foreign policy communities. The discussion around transboundary water was considered in the context of the greater global water challenges facing US national security.

  13. Integrating NASA Earth Science Enterprise (ESE) Data Into Global Agricultural Decision Support Systems

    Science.gov (United States)

    Teng, W.; Kempler, S.; Chiu, L.; Doraiswamy, P.; Liu, Z.; Milich, L.; Tetrault, R.

    2003-12-01

    Monitoring global agricultural crop conditions during the growing season and estimating potential seasonal production are critically important for market development of U.S. agricultural products and for global food security. Two major operational users of satellite remote sensing for global crop monitoring are the USDA Foreign Agricultural Service (FAS) and the U.N. World Food Programme (WFP). The primary goal of FAS is to improve foreign market access for U.S. agricultural products. The WFP uses food to meet emergency needs and to support economic and social development. Both use global agricultural decision support systems that can integrate and synthesize a variety of data sources to provide accurate and timely information on global crop conditions. The Goddard Space Flight Center Earth Sciences Distributed Active Archive Center (GES DAAC) has begun a project to provide operational solutions to FAS and WFP, by fully leveraging results from previous work, as well as from existing capabilities of the users. The GES DAAC has effectively used its recently developed prototype TRMM Online Visualization and Analysis System (TOVAS) to provide ESE data and information to the WFP for its agricultural drought monitoring efforts. This prototype system will be evolved into an Agricultural Information System (AIS), which will operationally provide ESE and other data products (e.g., rainfall, land productivity) and services, to be integrated into and thus enhance the existing GIS-based, decision support systems of FAS and WFP. Agriculture-oriented, ESE data products (e.g., MODIS-based, crop condition assessment product; TRMM derived, drought index product) will be input to a crop growth model in collaboration with the USDA Agricultural Research Service, to generate crop condition and yield prediction maps. The AIS will have the capability for remotely accessing distributed data, by being compliant with community-based interoperability standards, enabling easy access to

  14. Economic and legal aspects of introducing novel ICT instruments: integrating sound into social media marketing - from audio branding to soundscaping

    Directory of Open Access Journals (Sweden)

    Daj, A.

    2013-12-01

    Full Text Available The pervasive expansion and implementation of ICT based marketing instruments imposes a new economic investigation of business models and regulatory solutions. Moreover, the current status of Social Media research indicates that the use of social networking and collaboration technologies is deeply changing the way people communicate, consume and cooperate with each other. Against the backdrop of widespread availability of digital audio-video content and the growing number of “smart” mobile devices, business professionals have developed new strategies for achieving customer involvement and retention through digitally linking audio stimuli to the powerful networking environment of Social Media.

  15. Health physics instrumentation - a progress report

    International Nuclear Information System (INIS)

    Maushart, R.

    1992-01-01

    Health Physics Instruments have changed rather dramatically in the past decade. On the one hand, technological innovations like Microprocessors, data storage facilities and imaging displays have altered shape, size and appearance of the classical devices, particularly the hand-held ones. On the other hand, instruments are increasingly being considered as an integral part of Radiation Protection procedures and organizations, supporting a smooth and reliable implementation of all necessary measures. This implies ease of operation, and extensive self-checking and performance control features. Since there are different categories of users with quite different degrees of motivation and training, the measuring instruments of the future will have to be adapted to specific types of users. Instruments for 'professional' radiation protection - for example in nuclear power plants and nuclear technology - will differ from instruments used in the radionuclide laboratory, where radiation protection will necessarily have to be done as a 'side-job'. (author)

  16. Project of an integrated calibration laboratory of instruments at IPEN; Projeto de um laboratorio integrado de calibracao de instrumentos no IPEN

    Energy Technology Data Exchange (ETDEWEB)

    Barros, Gustavo Adolfo San Jose

    2009-07-01

    The Calibration Laboratory of Instruments of Instituto de Pesquisas Energeticas e Nucleares offers calibration services of radiation detectors used in radioprotection, diagnostic radiology and radiotherapy, for IPEN and for external facilities (public and private). One part of its facilities is located in the main building, along with other laboratories and study rooms, and another part in an isolated building called Bunker. For the optimization, modernization and specially the safety, the laboratories in the main building shall be transferred to an isolated place. In this work, a project of an integrated laboratory for calibration of instruments was developed, and it will be an expansion of the current Calibration Laboratory of Instruments of IPEN. Therefore, a series of radiometric monitoring of the chosen localization of the future laboratory was realized, and all staff needs (dimensions and disposition of the study rooms and laboratories) were defined. In this project, the laboratories with X ray equipment, alpha and beta radiation sources were located at an isolated part of the building, and the wall shielding was determined, depending on the use of each laboratory. (author)

  17. Planning and constructional instruments that support an energy-efficient supply of heat; Planungs- und Bauinstrumente zugunsten einer energieeffizienten Waermeversorgung

    Energy Technology Data Exchange (ETDEWEB)

    Renaud, P.; Bonnet, C. [Planair SA, Bureau d' ingenieurs SIA, La Sagne (Switzerland); Hoesli, B.; Wuethrich, M. [Hesse und Schwarze und Partner, Buero fuer Raumplanung AG, Zuerich (Switzerland); Gerheuser, F. W. [Polis, Politikberatung und Sozialforschung, Brugg (Switzerland)

    2004-07-01

    This comprehensive report for the Swiss Federal Office of Energy (SFOE) and the Cantons of Basel-Stadt, Berne, Geneva and Zurich presents the results of a study that examined how regulations in the planning and construction areas can be used to support the saving of energy, its efficient use and how the proportion of renewable sources of energy can be increased. Topics discussed include dense building, passive energy generation, obligatory refurbishing of existing building with high energy consumption, use of the 'Minergie' low energy-consumption standard for new and refurbished buildings, aid for energy refurbishment, co-ordination of the use of district heating, definition of intensive-farming areas, development of energy concepts with restrictions on energy consumption and carbon dioxide production as well as aids for negotiation and the development of target agreements. The report suggests an order of priority in which the measures should be considered and makes suggestions for action to be taken in various areas.

  18. Complexity impact factors on the integration process of ERP and non ERP systems : a basis for an evaluation instrument

    NARCIS (Netherlands)

    Janssens, G.; Hoeijenbos, M.; Kusters, R.J.; Cuaresma, M.J.E.; Shishkov, B.; Cordeiro, J.

    2011-01-01

    This study shows an expert confirmed initial list of factors which influence the complexity of the integration process of ERP systems and non ERP systems. After a thorough search for complexity factors in scientific literature, a survey amongst 8 experts in a leading European long special steel

  19. An Integrated Decision Support System with Hydrological Processes and Socio-economic Assessments

    Science.gov (United States)

    Yu, Yang; Disse, Markus; Yu, Ruide

    2017-04-01

    The debate over the effectiveness of Integrated Water Resources Management (IWRM) in practice has lasted for years. As the complexity and scope of IWRM increases, the difficulties of hydrological modeling is shifting from the model itself into the links with other cognate sciences, to understand the interactions among water, earth, ecosystem and humans. This work presents the design and development of a decision support system (DSS) that links the outputs of hydrological models with real-time decision making on social-economic assessments and land use changes. Discharge and glacier geometry changes were simulated with hydrological model WASA. Irrigation and ecological water were simulated by a new commercial software MIKE HYDRO. Groundwater was simulated by MODFLOW. All the outputs of theses hydrological models were integrated as inputs into the DSS in three types of links: regression equations, stationary data inputs, or dynamic data inputs into DSS as the models running parallel in the simulation periods. Within DSS, three types of logics were established: equations, conditional statements and fuzzy logics. The programming was realized in C++. The implementation of DSS takes place in the Tarim River Basin. With the mainstream of 1,321km and located in an arid area in northwest China, the Tarim River is China's longest inland river. The Tarim basin on the northern edge of the Taklamakan desert is an extremely arid region. In this region, agricultural water consumption and allocation management are crucial to address the conflicts among irrigation water users from upstream to downstream. Since 2011, the German Ministry of Science and Education BMBF established the Sino-German SuMaRiO project, for the sustainable management of river oases along the Tarim River. Project SuMaRiO focus on realizable management strategies, considering social, economic and ecological criteria. This will have positive effects for nearly 10 million inhabitants of different ethnic groups

  20. The case and opportunity for public-supported financial incentives to implement integrated pest management.

    Science.gov (United States)

    Brewer, Michael J; Hoard, Robert J; Landis, Joy N; Elworth, Lawrence E

    2004-12-01

    Food, water, and worker protection regulations have driven availability, and loss, of pesticides for use in pest management programs. In response, public-supported research and extension projects have targeted investigation and demonstration of reduced-risk integrated pest management (IPM) techniques. But these new techniques often result in higher financial burden to the grower, which is counter to the IPM principle that economic competitiveness is critical to have IPM adopted. As authorized by the 2002 Farm Bill and administered by the U.S. Department of Agriculture (USDA) Natural Resources Conservation Service (NRCS), conservation programs exist for delivering public-supported financial incentives to growers to increase environmental stewardship on lands in production. NRCS conservation programs are described, and the case for providing financial incentives to growers for implementing IPM is presented. We also explored the opportunity and challenge to use one key program, the Environmental Quality Incentives Program (EQIP), to aid grower adoption of IPM. The EQIP fund distribution to growers from 1997 to 2002 during the last Farm Bill cycle totaled approximately 1.05 billion dollars with a portion of funds supporting an NRCS-designed pest management practice. The average percentage of allocation of EQIP funds to this pest management practice among states was 0.77 +/- 0.009% (mean +/- SD). Using Michigan as an example, vegetable and fruit grower recognition of the program's use to implement IPM was modest (25% of growers surveyed), and their recognition of its use in aiding implementation of IPM was improved after educational efforts (74%). Proposals designed to enhance program usefulness in implementing IPM were delivered through the NRCS advisory process in Michigan. Modifications for using the NRCS pest management practice to address resource concerns were adopted, incentive rates for pest management were adjusted, and an expanded incentive structure for IPM

  1. Analyzing policy support instruments and regulatory risk factors for wind energy deployment-A developers' perspective

    Energy Technology Data Exchange (ETDEWEB)

    Luethi, Sonja, E-mail: sonja.luethi@unisg.ch [University of St. Gallen, 9000 St. Gallen (Switzerland); Praessler, Thomas [Potsdam Institute for Climate Impact Research (Germany)

    2011-09-15

    A transition to a renewable energy system is high on the policy agenda in many countries. A promising energy source for a low-carbon energy future is wind. Policy-makers can attract wind energy development by providing attractive policy frameworks. This paper argues that apart from the level of financial support, both the risks stemming from the regulatory environment (legal security, administrative process and grid access) and the ability to finance projects play a critical role in determining the attractiveness of the development environment. It sheds light on how project developers trade off these different aspects and to what extent the attractiveness of a certain policy framework increases with the introduction of specific measures. Conjoint analysis is employed to provide empirical evidence on the preference of wind energy developers in the EU and the US. The analysis shows that developers' preferences are very similar across the studied regions and for different types of developers. Which policy measures could be most valuable depends on the specific existing environment. In some southeastern European countries, a reduction of administrative process duration may yield the highest utility gains, whereas, in the US, improvements in grid access regulation and an increase in remuneration levels may be more effective. - Highlights: > Paper suggests conjoint analysis as scenario tool for estimating potential effects of specific policy measures. > It provides a quantitative, empirical dataset of 119 onshore wind energy developers' preferences. > Results suggest that the aspects 'Legal security' and 'Remuneration' are important attributes. > Cluster analyses yields slightly different preferences for developers from EU and US.

  2. Integrating research tools to support the management of social-ecological systems under climate change

    Science.gov (United States)

    Miller, Brian W.; Morisette, Jeffrey T.

    2014-01-01

    Developing resource management strategies in the face of climate change is complicated by the considerable uncertainty associated with projections of climate and its impacts and by the complex interactions between social and ecological variables. The broad, interconnected nature of this challenge has resulted in calls for analytical frameworks that integrate research tools and can support natural resource management decision making in the face of uncertainty and complex interactions. We respond to this call by first reviewing three methods that have proven useful for climate change research, but whose application and development have been largely isolated: species distribution modeling, scenario planning, and simulation modeling. Species distribution models provide data-driven estimates of the future distributions of species of interest, but they face several limitations and their output alone is not sufficient to guide complex decisions for how best to manage resources given social and economic considerations along with dynamic and uncertain future conditions. Researchers and managers are increasingly exploring potential futures of social-ecological systems through scenario planning, but this process often lacks quantitative response modeling and validation procedures. Simulation models are well placed to provide added rigor to scenario planning because of their ability to reproduce complex system dynamics, but the scenarios and management options explored in simulations are often not developed by stakeholders, and there is not a clear consensus on how to include climate model outputs. We see these strengths and weaknesses as complementarities and offer an analytical framework for integrating these three tools. We then describe the ways in which this framework can help shift climate change research from useful to usable.

  3. Argo: an integrative, interactive, text mining-based workbench supporting curation

    Science.gov (United States)

    Rak, Rafal; Rowley, Andrew; Black, William; Ananiadou, Sophia

    2012-01-01

    Curation of biomedical literature is often supported by the automatic analysis of textual content that generally involves a sequence of individual processing components. Text mining (TM) has been used to enhance the process of manual biocuration, but has been focused on specific databases and tasks rather than an environment integrating TM tools into the curation pipeline, catering for a variety of tasks, types of information and applications. Processing components usually come from different sources and often lack interoperability. The well established Unstructured Information Management Architecture is a framework that addresses interoperability by defining common data structures and interfaces. However, most of the efforts are targeted towards software developers and are not suitable for curators, or are otherwise inconvenient to use on a higher level of abstraction. To overcome these issues we introduce Argo, an interoperable, integrative, interactive and collaborative system for text analysis with a convenient graphic user interface to ease the development of processing workflows and boost productivity in labour-intensive manual curation. Robust, scalable text analytics follow a modular approach, adopting component modules for distinct levels of text analysis. The user interface is available entirely through a web browser that saves the user from going through often complicated and platform-dependent installation procedures. Argo comes with a predefined set of processing components commonly used in text analysis, while giving the users the ability to deposit their own components. The system accommodates various areas and levels of user expertise, from TM and computational linguistics to ontology-based curation. One of the key functionalities of Argo is its ability to seamlessly incorporate user-interactive components, such as manual annotation editors, into otherwise completely automatic pipelines. As a use case, we demonstrate the functionality of an in

  4. Integrated System Design for a Large Wind Turbine Supported on a Moored Semi-Submersible Platform

    Directory of Open Access Journals (Sweden)

    Jinsong Liu

    2018-01-01

    Full Text Available Over the past few decades, wind energy has emerged as an alternative to conventional power generation that is economical, environmentally friendly and, importantly, renewable. Specifically, offshore wind energy is being considered by a number of countries to harness the stronger and more consistent wind resource compared to that over land. To meet the projected “20% energy from wind by 2030” scenario that was announced in 2006, 54 GW of added wind energy capacity need to come from offshore according to a National Renewable Energy Laboratory (NREL study. In this study, we discuss the development of a semi-submersible floating offshore platform with a catenary mooring system to support a very large 13.2-MW wind turbine with 100-m blades. An iterative design process is applied to baseline models with Froude scaling in order to achieve preliminary static stability. Structural dynamic analyses are performed to investigate the performance of the new model using a finite element method approach for the tower and a boundary integral equation (panel method for the platform. The steady-state response of the system under uniform wind and regular waves is first studied to evaluate the performance of the integrated system. Response amplitude operators (RAOs are computed in the time domain using white-noise wave excitation; this serves to highlight nonlinear, as well as dynamic characteristics of the system. Finally, selected design load cases (DLCs and the stochastic dynamic response of the system are studied to assess the global performance for sea states defined by wind fields with turbulence and long-crested irregular waves.

  5. NOAA Observing System Integrated Analysis (NOSIA): development and support to the NOAA Satellite Observing System Architecture

    Science.gov (United States)

    Reining, R. C.; Cantrell, L. E., Jr.; Helms, D.; LaJoie, M.; Pratt, A. S.; Ries, V.; Taylor, J.; Yuen-Murphy, M. A.

    2016-12-01

    There is a deep relationship between NOSIA-II and the Federal Earth Observation Assessment (EOA) efforts (EOA 2012 and 2016) chartered under the National Science and Technology Council, Committee on Environment, Natural Resources, and Sustainability, co-chaired by the White House Office of Science and Technology Policy, NASA, NOAA, and USGS. NOSIA-1, which was conducted with a limited scope internal to NOAA in 2010, developed the methodology and toolset that was adopted for EOA 2012, and NOAA staffed the team that conducted the data collection, modeling, and analysis effort for EOA 2012. EOA 2012 was the first-ever integrated analysis of the relative impact of 379 observing systems and data sources contributing to the key objectives identified for 13 Societal Benefit Areas (SBA) including Weather, Climate, Disasters, Oceans and Coastal Resources, and Water Resources. This effort culminated in the first National Plan for Civil Earth Observations. NOAA conducted NOSIA-II starting in 2012 to extend the NOSIA methodology across all of NOAA's Mission Service Areas, covering a representative sample (over 1000) of NOAA's products and services. The detailed information from NOSIA-II is being integrated into EOA 2016 to underpin a broad array of Key Products, Services, and (science) Objectives (KPSO) identified by the inter-agency SBA teams. EOA 2016 is expected to provide substantially greater insight into the cross-agency impacts of observing systems contributing to a wide array of KPSOs, and by extension, to societal benefits flowing from these public-facing products. NOSIA-II is being adopted by NOAA as a corporate decision-analysis and support capability to inform leadership decisions on its integrated observing systems portfolio. Application examples include assessing the agency-wide impacts of planned decommissioning of ships and aircraft in NOAA's fleet, and the relative cost-effectiveness of alternative space-based architectures in the post-GOES-R and JPSS era

  6. Maintaining a Local Data Integration System in Support of Weather Forecast Operations

    Science.gov (United States)

    Watson, Leela R.; Blottman, Peter F.; Sharp, David W.; Hoeth, Brian

    2010-01-01

    Since 2000, both the National Weather Service in Melbourne, FL (NWS MLB) and the Spaceflight Meteorology Group (SMG) have used a local data integration system (LDIS) as part of their forecast and warning operations. Each has benefited from 3-dimensional analyses that are delivered to forecasters every 15 minutes across the peninsula of Florida. The intent is to generate products that enhance short-range weather forecasts issued in support of NWS MLB and SMG operational requirements within East Central Florida. The current LDIS uses the Advanced Regional Prediction System (ARPS) Data Analysis System (ADAS) package as its core, which integrates a wide variety of national, regional, and local observational data sets. It assimilates all available real-time data within its domain and is run at a finer spatial and temporal resolution than current national- or regional-scale analysis packages. As such, it provides local forecasters with a more comprehensive and complete understanding of evolving fine-scale weather features. Recent efforts have been undertaken to update the LDIS through the formal tasking process of NASA's Applied Meteorology Unit. The goals include upgrading LDIS with the latest version of ADAS, incorporating new sources of observational data, and making adjustments to shell scripts written to govern the system. A series of scripts run a complete modeling system consisting of the preprocessing step, the main model integration, and the post-processing step. The preprocessing step prepares the terrain, surface characteristics data sets, and the objective analysis for model initialization. Data ingested through ADAS include (but are not limited to) Level II Weather Surveillance Radar- 1988 Doppler (WSR-88D) data from six Florida radars, Geostationary Operational Environmental Satellites (GOES) visible and infrared satellite imagery, surface and upper air observations throughout Florida from NOAA's Earth System Research Laboratory/Global Systems Division

  7. Integrated Program of Experimental Diagnostics at the NNSS: An Integrated, Prioritized Work Plan for Diagnostic Development and Maintenance and Supporting Capability

    International Nuclear Information System (INIS)

    2010-01-01

    This Integrated Program of Experimental Diagnostics at the NNSS is an integrated prioritized work plan for the Nevada National Security Site (NNSS), formerly the Nevada Test Site (NTS), program that is independent of individual National Security Enterprise Laboratories (Labs) requests or specific Subprograms being supported. This prioritized work plan is influenced by national priorities presented in the Predictive Capability Framework (PCF) and other strategy documents (Primary and Secondary Assessment Technologies Plans and the Plutonium Experiments Plan). This document satisfies completion criteria for FY 2010 MRT milestone No.3496: Document an integrated, prioritized work plan for diagnostic development, maintenance, and supporting capability. This document is an update of the 3-year NNSS plan written a year ago, September 21, 2009, to define and understand Lab requests for diagnostic implementation. This plan is consistent with Lab interpretations of the PCF, Primary Assessment Technologies, and Plutonium Experiment plans.

  8. Integrated social facility location planning for decision support: Accessibility studies provide support to facility location and integration of social service provision

    CSIR Research Space (South Africa)

    Green, Cheri A

    2012-09-01

    Full Text Available for two or more facilities to create an integrated plan for development Step 6 Costing of development plan Case Study Access norms and thresholds guidelines in accessibility analysis Appropriate norms/provision guidelines facilitate both service... access norms and threshold standards ?Test the relationship between service demand and the supply (service capacity) of the facility provision points within a defined catchment area ?Promote the ?right?sizing? of facilities relative to the demand...

  9. Implementing Information and Communication Technology to Support Community Aged Care Service Integration: Lessons from an Australian Aged Care Provider

    Directory of Open Access Journals (Sweden)

    Heather E Douglas

    2017-04-01

    Full Text Available Introduction: There is limited evidence of the benefits of information and communication technology (ICT to support integrated aged care services. Objectives: We undertook a case study to describe carelink+, a centralised client service management ICT system implemented by a large aged and community care service provider, Uniting. We sought to explicate the care-related information exchange processes associated with carelink+ and identify lessons for organisations attempting to use ICT to support service integration. Methods: Our case study included seventeen interviews and eleven observation sessions with a purposive sample of staff within the organisation. Inductive analysis was used to develop a model of ICT-supported information exchange. Results: Management staff described the integrated care model designed to underpin carelink+. Frontline staff described complex information exchange processes supporting coordination of client services. Mismatches between the data quality and the functions carelink+ was designed to support necessitated the evolution of new work processes associated with the system. Conclusions: There is value in explicitly modelling the work processes that emerge as a consequence of ICT. Continuous evaluation of the match between ICT and work processes will help aged care organisations to achieve higher levels of ICT maturity that support their efforts to provide integrated care to clients.

  10. Implementing Information and Communication Technology to Support Community Aged Care Service Integration: Lessons from an Australian Aged Care Provider.

    Science.gov (United States)

    Douglas, Heather E; Georgiou, Andrew; Tariq, Amina; Prgomet, Mirela; Warland, Andrew; Armour, Pauline; Westbrook, Johanna I

    2017-04-10

    There is limited evidence of the benefits of information and communication technology (ICT) to support integrated aged care services. We undertook a case study to describe carelink+, a centralised client service management ICT system implemented by a large aged and community care service provider, Uniting. We sought to explicate the care-related information exchange processes associated with carelink+ and identify lessons for organisations attempting to use ICT to support service integration. Our case study included seventeen interviews and eleven observation sessions with a purposive sample of staff within the organisation. Inductive analysis was used to develop a model of ICT-supported information exchange. Management staff described the integrated care model designed to underpin carelink+. Frontline staff described complex information exchange processes supporting coordination of client services. Mismatches between the data quality and the functions carelink+ was designed to support necessitated the evolution of new work processes associated with the system. There is value in explicitly modelling the work processes that emerge as a consequence of ICT. Continuous evaluation of the match between ICT and work processes will help aged care organisations to achieve higher levels of ICT maturity that support their efforts to provide integrated care to clients.

  11. Implementing Information and Communication Technology to Support Community Aged Care Service Integration: Lessons from an Australian Aged Care Provider

    Science.gov (United States)

    Georgiou, Andrew; Tariq, Amina; Prgomet, Mirela; Warland, Andrew; Armour, Pauline; Westbrook, Johanna I

    2017-01-01

    Introduction: There is limited evidence of the benefits of information and communication technology (ICT) to support integrated aged care services. Objectives: We undertook a case study to describe carelink+, a centralised client service management ICT system implemented by a large aged and community care service provider, Uniting. We sought to explicate the care-related information exchange processes associated with carelink+ and identify lessons for organisations attempting to use ICT to support service integration. Methods: Our case study included seventeen interviews and eleven observation sessions with a purposive sample of staff within the organisation. Inductive analysis was used to develop a model of ICT-supported information exchange. Results: Management staff described the integrated care model designed to underpin carelink+. Frontline staff described complex information exchange processes supporting coordination of client services. Mismatches between the data quality and the functions carelink+ was designed to support necessitated the evolution of new work processes associated with the system. Conclusions: There is value in explicitly modelling the work processes that emerge as a consequence of ICT. Continuous evaluation of the match between ICT and work processes will help aged care organisations to achieve higher levels of ICT maturity that support their efforts to provide integrated care to clients. PMID:29042851

  12. Social marketing-based communications to integrate and support the HEALTHY study intervention.

    Science.gov (United States)

    DeBar, L L; Schneider, M; Ford, E G; Hernandez, A E; Showell, B; Drews, K L; Moe, E L; Gillis, B; Jessup, A N; Stadler, D D; White, M

    2009-08-01

    The HEALTHY study was a randomized, controlled, multicenter, middle school-based, multifaceted intervention designed to reduce risk factors for the development of type 2 diabetes. The study randomized 42 middle schools to intervention or control, and followed students from the sixth to the eighth grades. Participants were a racially, ethnically and geographically diverse cohort from across the United States. Here, we describe the conceptual underpinnings and design of the social marketing-based communications component of the HEALTHY study intervention that combined changes in the school nutrition and physical education (PE) environment with behavior change initiatives. The communications intervention component coordinated multiple elements to deliver campaigns that served to integrate and support all aspects of the HEALTHY intervention. The campaigns unfolded across five semesters of middle school, each targeting a specific theme related to the HEALTHY objectives. Communications campaigns comprised (1) core elements such as branding, posters, banners and visual and verbal messaging, (2) student events supporting the nutrition, PE and behavior intervention components through the application of social marketing and communications strategies, including the incorporation of student-generated media and (3) distribution of premiums and theme enhancers to extend the visibility of the study beyond the intervention environment. Formative research conducted with students, parents and school administrators was used to refine the communications strategy. Student peer communicators selected from the student body were involved to influence the normative student environment. Marketing and creative design experts developed a brand, logo, activities and materials. In the latter half of the study, student-generated messages and media were used to reflect local interests and culture and enhance peer influence. The HEALTHY intervention delivery and impact were strengthened by the

  13. Bioregenerative Life Support Experiment for 90-days in a Closed Integrative Experimental Facility LUNAR PALACE 1

    Science.gov (United States)

    Liu, Hong

    A 90-day bioregenerative life support experiment with three-member crew was carried out in the closed integrative experimental facility, LUNAR PALACE 1 regenerating basic living necessities and disposing wastes to provide life support for crew. It was composed of higher plant module, animal module, and waste treatment module. The higher plant module included wheat, chufa, pea, carrot and green leafy vegetables, with aim to satisfy requirement of 60% plant food and 100% O2 and water for crew. The yellow mealworm was selected as animal module to provide partial animal protein for crew, and reared on plant inedible biomass. The higher plant and yellow mealworm were both cultivated and harvested in the conveyor-type manner. The partial plant inedible biomass and human feces were mixed and co- fermented in the waste treatment module for preparation of soil-like substrate by bioconversion, maintaining gas balance and increasing closure degree. Meanwhile, in the waste treatment module, the water and partial nitrogen from human urine were recovered by physical-chemical means. Circulation of O2 and water as well as food supply from crops cultivated in the LUNAR PALACE 1 were investigated and calculated, and simultaneously gas exchange, mass flow among different components and system closure degree were also analyzed, respectively. Furthermore, the system robustness with respect to internal variation was tested and evaluated by sensitivity analysis of the aggregative index consisting of key performance indicators like crop yield, gaseous equilibrium concentration, microbial community composition, biogenic elements dynamics, etc., and comprehensively evaluating the operating state, to number change of crew from 2 to 4 during the 90-day closed experiment period.

  14. Social marketing-based communications to integrate and support the HEALTHY study intervention

    Science.gov (United States)

    DeBar, LL; Schneider, M; Ford, EG; Hernandez, AE; Showell, B; Drews, KL; Moe, EL; Gillis, B; Jessup, AN; Stadler, DD; White, M

    2009-01-01

    The HEALTHY study was a randomized, controlled, multicenter, middle school-based, multifaceted intervention designed to reduce risk factors for the development of type 2 diabetes. The study randomized 42 middle schools to intervention or control, and followed students from the sixth to the eighth grades. Participants were a racially, ethnically and geographically diverse cohort from across the United States. Here, we describe the conceptual underpinnings and design of the social marketing-based communications component of the HEALTHY study intervention that combined changes in the school nutrition and physical education (PE) environment with behavior change initiatives. The communications intervention component coordinated multiple elements to deliver campaigns that served to integrate and support all aspects of the HEALTHY intervention. The campaigns unfolded across five semesters of middle school, each targeting a specific theme related to the HEALTHY objectives. Communications campaigns comprised (1) core elements such as branding, posters, banners and visual and verbal messaging, (2) student events supporting the nutrition, PE and behavior intervention components through the application of social marketing and communications strategies, including the incorporation of student-generated media and (3) distribution of premiums and theme enhancers to extend the visibility of the study beyond the intervention environment. Formative research conducted with students, parents and school administrators was used to refine the communications strategy. Student peer communicators selected from the student body were involved to influence the normative student environment. Marketing and creative design experts developed a brand, logo, activities and materials. In the latter half of the study, student-generated messages and media were used to reflect local interests and culture and enhance peer influence. The HEALTHY intervention delivery and impact were strengthened by the

  15. Integral Public Activities as a Support to the Site Selection Process for LILW Repository

    International Nuclear Information System (INIS)

    Zeleznik, N.; Kralj, M.

    2008-01-01

    The first site selection process for low and intermediate level radioactive waste (LILW) repository took place between 1990 and 1993 in Slovenia was stopped unsuccessfully with very strong public opposition at local level, followed by political withdrawal on national level. As one of the consequences ARAO started to develop new approach to the site selection based also on the findings from sociology, psychology and other human sciences. The recommendations on public involvement and transparency were so strong that ARAO started with first limited public relation (PR) activities which later grew to the PR process which supports all technical activities in ARAO. Presently the PR process covers communication, information and research activities and assures careful planning, prompt responds and involvement of the highest responsible persons at ARAO. Integral public relation activities are divided in several parts. Majority of activities support the on-going site selection process where activities are presently focused on functioning of local partnerships developed as a basic communication tool to involve as much citizens and public as possible on local level. Presently two local partnerships are working in Krsko and Brezice community with clear role to enhance public involvement according to Aarchus convention. Each of the partnerships is organized in a specific way adjusted to the local needs. Communication activities are organized also for different other projects and are preparing the necessary basis for the work with different groups of stake holders and in different situations. As a foundation very broad information material, such as books, leaflets, reports, magazines, video cassettes, CD and DVD on the radioactive waste management is prepared and used for different purposes. We also try to be proactive with web pages and have a well organized visitors' center. Improvement of public relation process is achieved through constant survey and feed-back information

  16. Support system for the professional integration of people with disability into the labour market.

    Science.gov (United States)

    Filgueiras, Ernesto; Vilar, Elisângela; Rebelo, Francisco

    2015-01-01

    Successful cases of professional reintegration were achieved when adequate conditions were created for the adaptation of the worker with disability to the working environment and to the professional activity, allowing them to carry out all their functions without any restriction. In this sense, this paper presents a methodology for professional integration of people with disability in service companies and industry. It has as results a matrix of analysis of a set of observables for the reintegration of people with disability into the labour market, as well as an auxiliary tool for those who work in recruitment of personnel. The main objective was to develop a tool (i.e., a software) based on the crossing of data obtained from the analysis of the individual capacities and the requirements of the job to optimise the relationship between worker and the workplace. There was also considered a series of strategies which can be adopted by the individuals and the possible adaptations in the workplace, as a way to reduce the handicap in the accomplishment of different activities. The methodology for the development of this study is divided in two phases: Phase I, destined to the assessment criteria and classification of the indispensable functional characteristics of the individuals; Phase II, related to the assessment criteria of the jobs and the functions that have to be performed. As a result it was developed an evaluation tool to match the individuals' capabilities and the job requirements. A software was created to support the evaluation and to help professionals during the assessment. This methodology together with the support tool demonstrated to be a quite inclusive tool, as it considers, as a matter of priority, the capacities of the individuals and the real necessities of the workplaces.

  17. Transforming on-grid renewable energy markets. A review of UNDP-GEF support for feed-in tariffs and related price and market-access instruments

    Energy Technology Data Exchange (ETDEWEB)

    Glemarec, Yannick; Rickerson, Wilson; Waissbein, Oliver

    2012-11-15

    As a Global Environment Facility (GEF) founding implementing agency, UNDP has worked on over 230 GEF-supported clean energy projects in close to 100 developing countries since 1992. About 100 of these projects in 80 countries have focused on renewable energy, supported by approximately US $ 293 million in GEF funds and leveraging US $1.48 billion in associated co-financing from national governments, international organizations, the private sector and non-governmental organizations. As part of UNDP efforts to codify and share lessons learnt from these initiatives, this report addresses how scarce public resources can be used to catalyze larger private financial flows for renewable energy. It provides an overview of UNDP-GEF’s extensive work supporting development of national renewable energy policies such as feed-in tariffs. In these activities UNDP-GEF assists developing countries to assess key risks and barriers to technology diffusion and then to identify a mix of policy and financial de-risking measures to remove these barriers and drive investment. This approach is illustrated through three case studies in Uruguay, Mauritius and Kazakhstan. This report is complemented by a companion publication presenting an innovative UNDP financial modeling tool to assist policymakers in appraising different public instruments to promote clean energy.

  18. Barriers to Integration of Traditional and Complementary Medicine in Supportive Cancer Care of Arab Patients in Northern Israel

    Directory of Open Access Journals (Sweden)

    Eran Ben-Arye

    2012-01-01

    Full Text Available In 2008, an Integrative Oncology Program (IOP, aiming to improve patients’ quality of life during chemotherapy and advanced cancer, was launched within the Clalit Health Organization's oncology service at the Lin Medical Center, Haifa, Israel. The IOP clinical activity is documented using a research-based registry protocol. In this study, we present an analysis of the registry protocol of 15 Arab patients with cancer who were referred to the IOP. Analysis of patients’ reported outcomes using the Edmonton Symptom Assessment Scale suggests that integrative medicine care improves fatigue (=0.024, nausea (=0.043, depression (=0.012, anxiety (=0.044, appetite (=0.012, and general well-being (=0.031. Barriers to integration of traditional and complementary medicine in supportive care of Arab patients are discussed followed by six practical recommendations aimed at improving accessibility of patients to integrative supportive care, as well as compliance with treatments.

  19. Communication and integration: a qualitative analysis of perspectives among Middle Eastern oncology healthcare professionals on the integration of complementary medicine in supportive cancer care.

    Science.gov (United States)

    Ben-Arye, Eran; Popper-Giveon, Ariela; Samuels, Noah; Mutafoglu, Kamer; Schiff, Elad; Omran, Suha; Charalambous, Haris; Dweikat, Tahani; Ghrayeb, Ibtisam; Turker, Ibrahim; Hassan, Azza; Hassan, Esmat; Nimri, Omar; Kebudi, Rejin; Silbermann, Michael

    2016-05-01

    The use of complementary and traditional medicine (CTM ) in Middle Eastern countries is widespread, including among patients with cancer. Perspectives of oncology healthcare professionals (HCPs) in this region regarding the integration of CTM within conventional supportive cancer care were explored. An 11-item questionnaire with an open-ended question asking respondents to comment about the integration of CTM within supportive cancer care was sent to Middle Eastern oncology HCPs, using snowball sampling methodology. The narratives provided were examined using thematic analysis. A total of 339 oncology HCPs completed and returned the study tool (80.3 % response rate ), of which 178 from 15 Middle Eastern countries responded to the open-ended question. The majority of respondents are in favor of the integration of CTM within supportive cancer care, though ideas on how this should be implemented varied. Thematic analysis identified multifactorial barriers to integration, which focused on HCPs' perspectives (e.g., a lack of knowledge and training; a skeptical approach to CTM), attitudes of patients and caregivers (e.g., unrealistic expectations regarding the outcomes of CTM treatments) and HCP-patient communication. In order to overcome these barriers, respondents suggested education and training programs for oncology HCPs which would focus on improving patients' quality-of-life-related outcomes. Middle Eastern oncology HCPs support the integration of CTM within supportive cancer care, while recognizing the need for education and training in this field. A better understanding of CTM would provide the knowledge and skills which would promote a non-judgmental, evidence-based approach, fostering better communication with patients.

  20. Subjective well-being amongst migrant children in China: unravelling the roles of social support and identity integration.

    Science.gov (United States)

    Ni, S; Chui, C H-K; Ji, X; Jordan, L; Chan, C L-W

    2016-09-01

    Migrant children refer to rural children who accompany one or both parents to urban area. Empirical evidence showed that compared with their urban counterparts, migrant children had poorer developmental, emotional and psychological health. A sample of 1306 migrant children were recruited to examine the characteristics of migrant children and investigate the effects of identity integration, support and socioeconomic factors (e.g. age, gender, type of school, family socioeconomic status, city type) on their subjective wellbeing. Children with higher levels of identity integration, social support, family socioeconomic status, who attended public school and who lived in the third-tiered city of Weihai demonstrated better subjective wellbeing. Social support remained a strong predictor for subjective wellbeing, despite a significant mediating effect of identity integration. These results highlight the need for policymakers and practitioners alike to address individual factors pertaining to psychological adjustments, as well as social determinants of subjective wellbeing in the context of migration. © 2016 John Wiley & Sons Ltd.