WorldWideScience

Sample records for instrument proficiency check

  1. 14 CFR Appendix F to Part 121 - Proficiency Check Requirements

    Science.gov (United States)

    2010-01-01

    ... (CONTINUED) AIR CARRIERS AND OPERATORS FOR COMPENSATION OR HIRE: CERTIFICATION AND OPERATIONS OPERATING...) and ends when the airplane touches down on the runway or when transition to a missed approach configuration is completed. Instrument conditions need not be simulated below 100′ above touchdown zone...

  2. Radioactive check sources for alpha and beta sensitive radiological instrumentation

    International Nuclear Information System (INIS)

    Barnett, J.M.; Kane, J.E. II.

    1994-06-01

    Since 1991, the Westinghouse Hanford Company has examined the construction and use of alpha and beta radioactive check sources for calibrating instruments and for performing response checks of instruments used for operational and environmental radiation detection. The purpose of using a radioactive check source is to characterize the response of a radiation monitoring instrument in the presence of radioactivity. To accurately calibrate the instrument and check its response, the check source used must emulate as closely as possible the actual physical and isotopic conditions being monitored. The isotope employed and the physical methods used to fabricate the check source (among other factors) determine instrument response. Although information from applicable national and international standards, journal articles, books, and government documents was considered, empirical data collected is most valuable when considering the type of source to use for a particular application. This paper presents source construction methods, use considerations, and standard recommendations. The results of a Hanford Site evaluation of several types of alpha and beta sources are also given

  3. 76 FR 63183 - Pilot in Command Proficiency Check and Other Changes to the Pilot and Pilot School Certification...

    Science.gov (United States)

    2011-10-12

    ...-0938; Amendment Nos. 61-128, 91-324, 141-15, and 142-7] RIN 2120-AJ18 Pilot in Command Proficiency Check and Other Changes to the Pilot and Pilot School Certification Rules; Correction AGENCY: Federal... regulations to revise the pilot, flight instructor, and pilot school certification requirements. In particular...

  4. 76 FR 54095 - Pilot in Command Proficiency Check and Other Changes to the Pilot and Pilot School Certification...

    Science.gov (United States)

    2011-08-31

    ... [Docket No.: FAA-2008-0938; Amendment Nos. 61-128, 91-324, 141-15, and 142-7] RIN 2120-AJ18 Pilot in Command Proficiency Check and Other Changes to the Pilot and Pilot School Certification Rules AGENCY... regulations concerning pilot, flight instructor, and pilot school certification. This rule will require pilot...

  5. Saturn V Instrument Unit Being Checked At MSFC

    Science.gov (United States)

    1967-01-01

    A technician checks the systems of the Saturn V instrument unit in a test facility in Huntsville. This instrument unit was flown aboard Apollo 4 on November 7, 1967, which was the first test flight of the Saturn V. The towering 363-foot Saturn V was a multi-stage, multi-engine launch vehicle standing taller than the Statue of Liberty. Altogether, the Saturn V engines produced as much power as 85 Hoover Dams.

  6. Analysing sensory panel performance in a proficiency test using the PanelCheck software

    DEFF Research Database (Denmark)

    Tomic, O.; Luciano, G.; Nilsen, A.

    2010-01-01

    Check software, a workflow is proposed that guides the user through the data analysis process. This allows practitioners and non-statisticians to get an overview over panel performances in a rapid manner without the need to be familiar with details on the statistical methods. Visualisation of data analysis...... results plays an important role as this provides a time saving and efficient way of screening and investigating sensory panel performances. Most of the statistical methods used in this paper are available in the open source software PanelCheck, which may be downloaded and used for free....

  7. Reliability of published data on radionuclide half lives - relevance to the use of reference sources for checking instrument performance

    International Nuclear Information System (INIS)

    Waldock, P.M.

    1999-01-01

    Long-lived calibrated radioisotopes are frequently used for checking of instrumentation used in the measurement of radiation; examples include: radioisotope assay meters, radiation monitors and sample counting equipment. In 1986 we purchased a radioisotope calibrator (Capintec CRC120) which was supplied with a number of long-lived check sources by the manufacturer, one of which was barium-133. The source came with its own calibration certificate and a quoted half life of 10.74 years ± 0.05 years, traceable to the National Bureau of Standards in the USA, and is consistent with data published by the National Nuclear Data Center, Brookhaven National Laboratory in 1985 (Tuli 1985). However, we noted at the time that this is significantly different to the value of 7.2 years quoted in the Radiochemical Manual (Wilson 1966) published by the Radiochemical Centre, Amersham (now Nycomed-Amersham), and more recently we have noted that it is significantly different to the value of 10.53 years currently quoted on various Internet sites including the University of Sheffield Chemistry Department (Winter 1999). Further investigation showed similar or worse variations of published half lives with time for several radioisotopes. Letter-to-the-editor

  8. Testing Proficiency in Interpersonal Communication

    Science.gov (United States)

    Byers, Burton H.

    1973-01-01

    Discusses several hypotheses about the measurement of speech-communication proficiency which are being tested at the University of Hawaii and a testing instrument entitled Dy Comm'' (dyadic communication) which emerged from this research. (DD)

  9. Instruments used to measure or check α, β, γ activity and neutron emission in the course of processing ore or irradiated fuel

    International Nuclear Information System (INIS)

    Blanc, A.; Brunet, M.; Kermagoret, M.; Labeyrie, J.; Roux, G.; Vasseur, J.; Weil, J.

    1959-01-01

    One of the methods checking ores in the course of treatment is the rapid quantitative determination of thorium. This measurement is carried out by means of a scintillation instrument which shows the β and α coincidences of ThC and ThC'. The treatment of irradiated fuel is accompanied by a large number of radioactive checks relative to the performance of the fixation and elution operations of uranium in the ion exchangers, to the concentration of radioactivity of effluent sent from the plant into watercourses. The operations of fixation and elution of the uranium are checked automatically by an instrument which takes a sample of 5 cm 3 of solution, evaporates it and measures its activity every 10 or 20 minutes. Plutonium concentrations are measured: - in the presence of strong β γ activities, by means of rotating cylinder detectors; - in the presence of weak β γ activities, by means of α detectors scanning a constant level liquid surface; - by means of fission chambers relatively insensitive to γ. Fission product concentrations are measured by chambers, counters or scintillators, according to the amount of γ activity present. Finally, the activity of effluent to be emptied into watercourses is checked by means of a scintillation instrument, which measures the α activity on the one hand, and on the other hand the β γ activity of residue from a 100 cm 3 sample taken and evaporated in 20 minutes. (author) [fr

  10. A Validation Study of the Student Oral Proficiency Assessment (SOPA).

    Science.gov (United States)

    Thompson, Lynn E.; Kenyon, Dorry M.; Rhodes, Nancy C.

    This study validated the Student Oral Proficiency Assessment (SOPA), an oral proficiency instrument designed for students in elementary foreign language programs. Elementary students who were tested with the SOPA were also administered other instruments designed to measure proficiency. These instruments included the Stanford Foreign Language Oral…

  11. Two sides of the same coin? A new instrument to assess body checking and avoidance behaviors in eating disorders.

    Science.gov (United States)

    Legenbauer, Tanja; Martin, Franziska; Blaschke, Ariane; Schwenzfeier, Anne; Blechert, Jens; Schnicker, Katja

    2017-06-01

    Body checking (BC) and avoidance behaviors (BA) are the dominant behavioral features of body image disturbances (BID) that characterize most individuals with eating disorders (EDs). Whereas BC can be reliably assessed, a valid assessment tool for BA is lacking, preventing an adequate assessment of BID differences across different EDs (anorexia nervosa, AN; bulimia nervosa, BN; binge eating disorder, BED). A total of 310 women with EDs and 112 nonclinical controls completed measures of BC-, BA- and ED-related symptoms. BA did not differentiate between EDs, whereas BC did: it was highest in AN and BN, and lowest in BED. Multivariate analyses also discriminated AN from BN based on BC. Given that results are of preliminary nature, evidence is promising that EDs can be discriminated from healthy controls and that differential BID profiles for the behavioral component among ED subgroups exist. However, replication of the factor structure remains open within ED subsamples. Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. Rigorous noise test and calibration check of strong-motion instrumentation at the Conrad Observatory in Austria.

    Science.gov (United States)

    Steiner, R.; Costa, G.; Lenhardt, W.; Horn, N.; Suhadolc, P.

    2012-04-01

    In the framework of the European InterregIV Italy/Austria project: "HAREIA - Historical and Recent Earthquakes in Italy and Austria" the Central Institute for Meteorology and Geodynamics (ZAMG) and Mathematic and Geosciences Department of University of Trieste (DMG) are upgrading the transfrontier seismic network of South-Eastern Alps with new 12 accelerometric stations to enhance the strong motion instrument density near the Austria/Italy border. Various public institutions of the provinces Alto Adige (Bolzano Province), Veneto (ARPAV) and Friuli Venezia Giulia (Regional Civil Defense) in Italy and in the Austrian province of Tyrol are involved in the project. The site selection was carried out to improve the present local network geometry thus meeting the needs of public Institutions in the involved regions. In Tyrol and Alto Adige some strategic buildings (hospitals and public buildings) have been selected, whereas in Veneto and Friuli Venezia Giulia the sites are in the free field, mainly located near villages. The instruments will be installed in an innovative box, designed by ZAMG, that provides electric and water isolation. The common choice regarding the instrument selection has been the new Kinemetrics Basalt ® accelerograph to guarantee homogeneity with the already installed instrumentation and compatibility with the software already in use at the different seismic institutions in the area. Prior to deployment the equipment was tested at the Conrad Observatory and a common set-up has been devised. The Conrad Observatory, seismically particularly quiet, permits to analyze both the sensor and the acquisition system noise. The instruments were connected to the network and the data sent in real-time to the ZAMG data center in Vienna and the DMG data center in Trieste. The data have been collected in the database and analyzed using signal processing modules PQLX and Matlab. The data analysis of the recordings at the ultra-quiet Conrad Observatory pointed out

  13. Check valve

    Science.gov (United States)

    Upton, H.A.; Garcia, P.

    1999-08-24

    A check valve for use in a GDCS of a nuclear reactor and having a motor driven disk including a rotatable armature for rotating the check valve disk over its entire range of motion is described. In one embodiment, the check valve includes a valve body having a coolant flow channel extending therethrough. The coolant flow channel includes an inlet end and an outlet end. A valve body seat is located on an inner surface of the valve body. The check valve further includes a disk assembly, sometimes referred to as the motor driven disc, having a counterweight and a disk shaped valve. The disk valve includes a disk base having a seat for seating with the valve body seat. The disk assembly further includes a first hinge pin member which extends at least partially through the disk assembly and is engaged to the disk. The disk valve is rotatable relative to the first hinge pin member. The check valve also includes a motor having a stator frame with a stator bore therein. An armature is rotatably positioned within the stator bore and the armature is coupled to the disk valve to cause the disk valve to rotate about its full range of motion. 5 figs.

  14. Check valve

    International Nuclear Information System (INIS)

    Upton, H.A.; Garcia, P.

    1999-01-01

    A check valve for use in a GDCS of a nuclear reactor and having a motor driven disk including a rotatable armature for rotating the check valve disk over its entire range of motion is described. In one embodiment, the check valve includes a valve body having a coolant flow channel extending therethrough. The coolant flow channel includes an inlet end and an outlet end. A valve body seat is located on an inner surface of the valve body. The check valve further includes a disk assembly, sometimes referred to as the motor driven disc, having a counterweight and a disk shaped valve. The disk valve includes a disk base having a seat for seating with the valve body seat. The disk assembly further includes a first hinge pin member which extends at least partially through the disk assembly and is engaged to the disk. The disk valve is rotatable relative to the first hinge pin member. The check valve also includes a motor having a stator frame with a stator bore therein. An armature is rotatably positioned within the stator bore and the armature is coupled to the disk valve to cause the disk valve to rotate about its full range of motion. 5 figs

  15. Ball check valve

    International Nuclear Information System (INIS)

    Bevilacqua, F.

    1978-01-01

    A pressurized nuclear reactor having an instrument assembly sheathed in a metallic tube which is extended vertically upward into the reactor core by traversing a metallic guide tube which is welded to the wall of the vessel is described. Sensors in each instrument assembly are connected to instruments outside the vessel to manifest the conditions within the core. Each instrument assembly probe is moved into position within a metallic guide channel. The guide channel penetrates the wall of the vessel and forms part of the barrier to the environment within the pressure vessel. Each channel includes a ball check valve which is opened by the instrument assembly probe when the probe passes through the valve. A ball valve element is moved from its seat by the probe to a position lateral of the bore of the channel and is guided to its seat along a sloped path within the valve body when the probe is removed. 5 claims, 3 figures

  16. Instrumentation

    International Nuclear Information System (INIS)

    Prieur, G.; Nadi, M.; Hedjiedj, A.; Weber, S.

    1995-01-01

    This second chapter on instrumentation gives little general consideration on history and classification of instrumentation, and two specific states of the art. The first one concerns NMR (block diagram of instrumentation chain with details on the magnets, gradients, probes, reception unit). The first one concerns precision instrumentation (optical fiber gyro-meter and scanning electron microscope), and its data processing tools (programmability, VXI standard and its history). The chapter ends with future trends on smart sensors and Field Emission Displays. (D.L.). Refs., figs

  17. Proficiency testing for sensory profile panels : measuring panel performance

    NARCIS (Netherlands)

    Mcewan, J.A.; Hunter, E.A.; Gemert, L.J. van; Lea, P.

    2002-01-01

    Proficiency testing in sensory analysis is an important step towards demonstrating that results from one sensory panel are consistent with the results of other sensory panels. The uniqueness of sensory analysis poses some specific problems for measuring the proficiency of the human instrument

  18. Proficiency tests, Evaluating

    NARCIS (Netherlands)

    Cofino, W.P.; Molenaar, J.; Torfs, P.J.J.F.

    2017-01-01

    Marine monitoring programs provide data that are essential for marine management. The reliability of such data is underpinned by proficiency tests. In the context of Quasimeme, a proficiency testing program for the marine environment, a statistical model has been developed in 2000 to evaluate data

  19. Instrumentation

    International Nuclear Information System (INIS)

    Decreton, M.

    2000-01-01

    SCK-CEN's research and development programme on instrumentation aims at evaluating the potentials of new instrumentation technologies under the severe constraints of a nuclear application. It focuses on the tolerance of sensors to high radiation doses, including optical fibre sensors, and on the related intelligent data processing needed to cope with the nuclear constraints. Main achievements in these domains in 1999 are summarised

  20. Instrumentation

    Energy Technology Data Exchange (ETDEWEB)

    Decreton, M

    2001-04-01

    SCK-CEN's research and development programme on instrumentation involves the assessment and the development of sensitive measurement systems used within a radiation environment. Particular emphasis is on the assessment of optical fibre components and their adaptability to radiation environments. The evaluation of ageing processes of instrumentation in fission plants, the development of specific data evaluation strategies to compensate for ageing induced degradation of sensors and cable performance form part of these activities. In 2000, particular emphasis was on in-core reactor instrumentation applied to fusion, accelerator driven and water-cooled fission reactors. This involved the development of high performance instrumentation for irradiation experiments in the BR2 reactor in support of new instrumentation needs for MYRRHA, and for diagnostic systems for the ITER reactor.

  1. Instrumentation

    International Nuclear Information System (INIS)

    Decreton, M.

    2001-01-01

    SCK-CEN's research and development programme on instrumentation involves the assessment and the development of sensitive measurement systems used within a radiation environment. Particular emphasis is on the assessment of optical fibre components and their adaptability to radiation environments. The evaluation of ageing processes of instrumentation in fission plants, the development of specific data evaluation strategies to compensate for ageing induced degradation of sensors and cable performance form part of these activities. In 2000, particular emphasis was on in-core reactor instrumentation applied to fusion, accelerator driven and water-cooled fission reactors. This involved the development of high performance instrumentation for irradiation experiments in the BR2 reactor in support of new instrumentation needs for MYRRHA, and for diagnostic systems for the ITER reactor

  2. Instrumentation

    International Nuclear Information System (INIS)

    Decreton, M.

    2002-01-01

    SCK-CEN's R and D programme on instrumentation involves the development of advanced instrumentation systems for nuclear applications as well as the assessment of the performance of these instruments in a radiation environment. Particular emphasis is on the use of optical fibres as umbilincal links of a remote handling unit for use during maintanance of a fusion reacor, studies on the radiation hardening of plasma diagnostic systems; investigations on new instrumentation for the future MYRRHA accelerator driven system; space applications related to radiation-hardened lenses; the development of new approaches for dose, temperature and strain measurements; the assessment of radiation-hardened sensors and motors for remote handling tasks and studies of dose measurement systems including the use of optical fibres. Progress and achievements in these areas for 2001 are described

  3. Instrumentation

    Energy Technology Data Exchange (ETDEWEB)

    Decreton, M

    2002-04-01

    SCK-CEN's R and D programme on instrumentation involves the development of advanced instrumentation systems for nuclear applications as well as the assessment of the performance of these instruments in a radiation environment. Particular emphasis is on the use of optical fibres as umbilincal links of a remote handling unit for use during maintanance of a fusion reacor, studies on the radiation hardening of plasma diagnostic systems; investigations on new instrumentation for the future MYRRHA accelerator driven system; space applications related to radiation-hardened lenses; the development of new approaches for dose, temperature and strain measurements; the assessment of radiation-hardened sensors and motors for remote handling tasks and studies of dose measurement systems including the use of optical fibres. Progress and achievements in these areas for 2001 are described.

  4. 14 CFR 61.107 - Flight proficiency.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Flight proficiency. 61.107 Section 61.107 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIRMEN... reference maneuvers; (vii) Navigation; (viii) Slow flight and stalls; (ix) Basic instrument maneuvers; (x...

  5. Instrumentation

    Energy Technology Data Exchange (ETDEWEB)

    Decreton, M

    2000-07-01

    SCK-CEN's research and development programme on instrumentation aims at evaluating the potentials of new instrumentation technologies under the severe constraints of a nuclear application. It focuses on the tolerance of sensors to high radiation doses, including optical fibre sensors, and on the related intelligent data processing needed to cope with the nuclear constraints. Main achievements in these domains in 1999 are summarised.

  6. Comparing Examinee Attitudes Toward Computer-Assisted and Other Oral Proficiency Assessments.

    Science.gov (United States)

    Kenyon, Dorry M.; Malabonga, Valerie

    2001-01-01

    Examined attitudes toward taking different formats of oral proficiency assessments across three languages: Spanish, Arabic, and Chinese. Students were administered both the tape-mediated Simulated Oral Proficiency Interview (SOPI) and a new Computerized Oral Proficiency Instrument (COPI). Questionnaire responses showed examinees, particularly…

  7. Instrumentation

    International Nuclear Information System (INIS)

    Umminger, K.

    2008-01-01

    A proper measurement of the relevant single and two-phase flow parameters is the basis for the understanding of many complex thermal-hydraulic processes. Reliable instrumentation is therefore necessary for the interaction between analysis and experiment especially in the field of nuclear safety research where postulated accident scenarios have to be simulated in experimental facilities and predicted by complex computer code systems. The so-called conventional instrumentation for the measurement of e. g. pressures, temperatures, pressure differences and single phase flow velocities is still a solid basis for the investigation and interpretation of many phenomena and especially for the understanding of the overall system behavior. Measurement data from such instrumentation still serves in many cases as a database for thermal-hydraulic system codes. However some special instrumentation such as online concentration measurement for boric acid in the water phase or for non-condensibles in steam atmosphere as well as flow visualization techniques were further developed and successfully applied during the recent years. Concerning the modeling needs for advanced thermal-hydraulic codes, significant advances have been accomplished in the last few years in the local instrumentation technology for two-phase flow by the application of new sensor techniques, optical or beam methods and electronic technology. This paper will give insight into the current state of instrumentation technology for safety-related thermohydraulic experiments. Advantages and limitations of some measurement processes and systems will be indicated as well as trends and possibilities for further development. Aspects of instrumentation in operating reactors will also be mentioned.

  8. Instruments

    International Nuclear Information System (INIS)

    Buehrer, W.

    1996-01-01

    The present paper mediates a basic knowledge of the most commonly used experimental techniques. We discuss the principles and concepts necessary to understand what one is doing if one performs an experiment on a certain instrument. (author) 29 figs., 1 tab., refs

  9. Check Verbraucherpolitik und Verbraucherbeteiligung

    DEFF Research Database (Denmark)

    Hagen, Kornelia; Micklitz, Hans-W.; Oehler, Andreas

    2013-01-01

    The paper discusses the opportunities for an empirically grounded decision support system as an instrument for independent and scientifically based consumer policy consulting. To date, consumer policy is dominated by the information paradigm and the leitbild of the rational, sovereign...... and information-seeking consumer. Yet, both everyday practice and research in behavioural economics show that this view lacks empirical ground. In fact, there are different consumer types and different forms of rationalities at work. Effective consumer policy making should be based on the empirically revealed...... an empirically based “Check Consumer Policy and Consumer Participation” as a systematic decision and evaluation tool for policy makers. This check should be independent from the government and should be grounded on an empirical view of the consumer. Consumer policy tools should be tested with real consumers...

  10. Instrumentation

    International Nuclear Information System (INIS)

    Muehllehner, G.; Colsher, J.G.

    1982-01-01

    This chapter reviews the parameters which are important to positron-imaging instruments. It summarizes the options which various groups have explored in designing tomographs and the methods which have been developed to overcome some of the limitations inherent in the technique as well as in present instruments. The chapter is not presented as a defense of positron imaging versus single-photon or other imaging modality, neither does it contain a description of various existing instruments, but rather stresses their common properties and problems. Design parameters which are considered are resolution, sampling requirements, sensitivity, methods of eliminating scattered radiation, random coincidences and attenuation. The implementation of these parameters is considered, with special reference to sampling, choice of detector material, detector ring diameter and shielding and variations in point spread function. Quantitation problems discussed are normalization, and attenuation and random corrections. Present developments mentioned are noise reduction through time-of-flight-assisted tomography and signal to noise improvements through high intrinsic resolution. Extensive bibliography. (U.K.)

  11. More Proficient vs. Less Proficient EFL Learners’ Perceptions of Teachers ‘Motivation Raising Strategies

    Directory of Open Access Journals (Sweden)

    Nasrin Yousefi

    2022-09-01

    Full Text Available Motivation raising strategies are frequently used in English as a Foreign Language (EFL classes; nevertheless, learners’ perceptions of such strategies used by language teachers have not sufficiently been explored. Also, there are not enough studies on differences and similarities between more and less proficient EFL learners regarding this issue. To scrutinize this topic, a groups of more (No=50 and less proficient EFL learners (No=50 participated in this study by completing to a validated, researcher-made questionnaire with a five-point Likert type format. Non-parametric Mann-Whiteny U test was run in the SPSS ver. 23 to check the differences between the two groups. The results of the study verified that, regardless of each individual scale in the utilized questionnaire, overall, the more proficient ones manifested significantly less perceptions on teachers’ motivation raising strategies based on the total estimated mean ranks compared with the less proficient learners.  However, within the surveyed scales, only in the classroom atmosphere scale, the results showed that the less proficient learners were more mindful of teacher strategies for motivation raising. The findings from this study have implications for motivation raising strategy instructions for a language classroom.

  12. Scram system with continuos check

    International Nuclear Information System (INIS)

    Rodriguez Sacco, Walter.

    1976-02-01

    The equipment described pretends to be a further step to the use of integrated circuits in nuclear instrumentation, considering that this type of control was traditionally carried out on the bases of electromechanical elements. A continuous self-check method has been applied in accordance with the high reliability requiered for this type of equipments. The developed equipment fulfils the condition that any deficiency in its component elements, causes an anormal self-detected operation. The equipment covers two systems: the Scram one, that includes the sequence generator-detector, the rods check and scram chain, and the Check system that uses pulses from the sequence detector. (author) [es

  13. Survey and analysis of radiation safety management systems at medical institutions. Second report. Radiation measurement, calibration of radiation survey meters, and periodic check of installations, equipment, and protection instruments

    International Nuclear Information System (INIS)

    Ohba, Hisateru; Ogasawara, Katsuhiko; Aburano, Tamio

    2006-01-01

    We carried out a questionnaire survey to determine the actual situation of radiation safety management measures in all medical institutions in Japan that had nuclear medicine facilities. The questionnaire consisted of questions concerning the evaluation of shielding capacity; radiation measurement; periodic checks of installations, equipment, and protection instruments; and the calibration of radiation survey meters. The analysis was undertaken according to region, type of establishment, and number of beds. The overall response rate was 60 percent. For the evaluation of shielding capacity, the outsourcing rate was 53 percent of the total. For the radiation measurements of ''leakage radiation dose and radioactive contamination'' and contamination of radioactive substances in the air'', the outsourcing rates were 28 percent and 35 percent of the total, respectively (p<0.001, according to region and establishment). For the periodic check of radiation protection instruments, the implementation rate was 98 percent, and the outsourcing rate was 32 percent for radiation survey meters and 47 percent for lead aprons. The non-implemented rate for calibration of radiation survey meters was 25 percent of the total (p<0.001, according to region and establishment). The outsourcing rate for calibration of radiation survey meters accounted for 87 percent of the total, and of these medical institutions, 72 percent undertook annual calibration. The implementation rate for patient exposure measurement was 20 percent of the total (p<0.001, according to number of beds), and of these medical institutions 46 percent recorded measurement outcome. (author)

  14. Maintenance proficiency evaluation test bank

    International Nuclear Information System (INIS)

    Maier, Loran

    2003-01-01

    The Maintenance Proficiency Evaluation Test Bank (MPETB) is an Electric Power Research Institute- (EPRJ-) operated, utility-sponsored means of developing, maintaining, and disseminating secure, high-quality written and performance maintenance proficiency tests. EPRTs charter is to ensure that all tests and test items that go into the Test Bank have been validated, screened for reliability, and evaluated to high standards of psychometric excellence. Proficiency tests of maintenance personnel.(mechanics, electricians, and instrumentation and control [I and C] technicians) are most often used to determine if an experienced employee is capable of performing maintenance tasks without further training. Such tests provide objective evidence for decisions to exempt an employee from what, for the employee, is unnecessary training. This leads to considerable savings in training costs and increased productivity because supervisors can assign personnel to tasks at which their competence is proven. The ultimate objective of proficiency evaluation is to ensure that qualified maintenance personnel are available to meet the maintenance requirements of the plant Numerous task-specific MPE tests (both written and performance) have been developed and validated using the EPRI MPE methodology by the utilities participating in the MPETB project A task-specific MPE consists of a multiple-choice written examination and a multi-step performance evaluation that can be used to assess an individual's present knowledge and skill level for a given maintenance task. The MPETB contains MPEs and test items for the mechanical, electrical, and I and C classifications that are readily available to participating utilities. Presently, utilities are placing emphasis on developing MPEs to evaluate outage-related maintenance tasks that demonstrate the competency and qualifications of plant and contractor personnel before the start of outage work. Utilities are also using the MPE methodology and process to

  15. Slingram EMI Devices for Characterizing Resistive Features Using Apparent Conductivity Measurements: check of the DualEM-421S Instrument and Field Tests

    OpenAIRE

    Dabas , Michel; Anest , Antoine; Thiesson , Julien; Tabbagh , Alain

    2016-01-01

    International audience; This article addresses the characterization of resistive archaeological targets and near surface structures by electromagnetic induction (EMI). It presents tests achieved with the DualEM-421S instrument (Dualem Inc., Milton, Canada) in order to be able to quantitatively compare these measurements to the standard technique of direct-current (d.c.) resistivity. The test was done over the Gallo-roman site of Vieil-Evreux in Normandy, France and one-dimensional (1D) and th...

  16. Regular health checks

    DEFF Research Database (Denmark)

    Grønhøj Larsen, Christian; Jørgensen, Karsten Juhl; Gøtzsche, Peter C

    2012-01-01

    To investigate whether Danish providers of general health checks present a balanced account of possible benefits and harms on their websites and whether the health checks are evidence-based.......To investigate whether Danish providers of general health checks present a balanced account of possible benefits and harms on their websites and whether the health checks are evidence-based....

  17. Self-Assessment, Preparation and Response Time on a Computerized Oral Proficiency Test

    Science.gov (United States)

    Malabonga, Valerie; Kenyon, Dorry M.; Carpenter, Helen

    2005-01-01

    Two studies investigated technical aspects of a computer-mediated test, the Computerized Oral Proficiency Instrument (COPI), particularly in contrast to a similar tape-mediated test, the Simulated Oral Proficiency Interview (SOPI). The first study investigated how examinees used self-assessment to choose an appropriate starting level on the COPI.…

  18. Southeast Asian Languages Proficiency Examinations.

    Science.gov (United States)

    Brown, James Dean; And Others

    The design, administration, revision, and validation of the Southeast Asian Summer Studies Institute proficiency examinations are reported. The examinations were created as parallel language proficiency tests in each of five languages: Indonesian, Khmer, Tagalog, Thai, and Vietnamese. Four tests were developed in each language: multiple-choice…

  19. Clinical Wisdom among Proficient Nurses

    DEFF Research Database (Denmark)

    Uhrenfeldt, Lisbeth; Hall, Elisabeth

    2007-01-01

    This paperexamines clinical wisdom which has emerged from a broader study anout nurse managers´influence on proficient registered nurse turnover and retention. The purpose of the study was to increase understanding of proficient nurses´experience and clinical practice by giving voice to the nurses...

  20. Checking Java Programs

    CERN Document Server

    Darwin, Ian

    2007-01-01

    This Short Cut tells you about tools that will improve the quality of your Java code, using checking above and beyond what the standard tools do, including: Using javac options, JUnit and assertions Making your IDE work harder Checking your source code with PMD Checking your compiled code (.class files) with FindBugs Checking your program's run-time behavior with Java PathFinder

  1. STRATEGIES OF MAINTAINING PROFICIENCY BY TEACHERS OF ENGLISH IN INDONESIA

    Directory of Open Access Journals (Sweden)

    Junaidi Mistar, Alfan Zuhairini

    2011-10-01

    Full Text Available The objectives of the present study are four-fold: (1 to identify the types of strategies to maintain proficiency used by teachers of English in Indonesia, (2 to know the intensity of use of the obtained strategy types, (3 to measure the inter-correlation in the use of the obtained strategy types, and (4 to investigate the effect of proficiency level on the use of maintaining strategies. The subjects were 93 teachers applying for S2 degree in 2010/2011 at the postgraduate program of the Islamic University of Malang. They were given two sets of instrument, a Likert-scale questionnaire of English proficiency maintaining strategies and a TOEFL test. Then, a factor analysis identified nine strategy categories, including language focusing, metacognitive and affective developing, reading and writing activating, language resource utilizing, cognitive processing, culture learning, social communicating, text analyzing, and radio listening strategies. These strategy types explained 63.84% of variances of maintaining strategies and they were used at high level of intensity. Moreover, the use of the nine strategy types were found to be inter-correlated with one another. Finally, no significant effect of proficiency level on strategy use was found, indicating that teachers with different level of proficiency reported using the same strategies of maintaining their proficiency.

  2. The Minnesota Articulation Project and Its Proficiency-Based Assessments.

    Science.gov (United States)

    Chalhoub-Deville, Micheline

    1997-01-01

    Reports on the Minnesota Articulation Project, providing an overview of the projects' three principal working groups: political action, curriculum, and assessment. The article then outlines the theoretical underpinnings of the proficiency-based assessment instruments developed in French, German, and Spanish and describes in detail the content and…

  3. National radon measurement-proficiency program: Individual proficiency report

    International Nuclear Information System (INIS)

    1992-05-01

    In February 1986, the U.S. Environmental Protection Agency (EPA) established the Radon Measurement Proficiency (RMP) Program to assist the public in identifying organizations capable of providing reliable radon measurement services. In December 1991, EPA announced the new individual proficiency listing category in the RMP Program. Individuals applying for this new listing status must demonstrate knowledge of radon measurement fundamentals by passing a written proficiency examination, maintain affiliation with an RMP listed organization, and meet other program requirements. This report lists those individuals who have met the requirements of the RMP Program as of April 30, 1992. These requirements are designed to provide minimum proficiency criteria for individuals who provide radon measurement services on-site in a residential environment

  4. National Radon Contractor Proficiency Program. Proficiency report: Supplement

    International Nuclear Information System (INIS)

    1991-02-01

    The report, a supplement to the RCP Proficiency Report, will further assist governmental officials in providing advice to the public on the selection of proficient radon mitigation contractors. These reports list 1,123 contractors who have met the requirements of the RCP Program as of December 15, 1990. The Proficiency Report provides information on each contractor's name, RCP identification number, company name, address, phone number, and geographic service area. The report provides two additional tables, indexed by company name and by RCP identification number. The report is intended to help users quickly identify a proficient contractor if only the company name is known, or to verify which contractor is associated with a particular ID number

  5. National Radon Contractor Proficiency (RCP) Program. Proficiency report, June 1991

    International Nuclear Information System (INIS)

    1991-06-01

    The primary objective of the U.S. Environmental Protection Agency's (EPA) efforts to address the indoor radon problem is to reduce radon levels in buildings throughout the country. Achieving the objective requires a nationwide supply of capable radon mitigation contractors. In the Indoor Radon Abatement Act of 1988, Congress authorized EPA to establish a program to evaluate radon mitigation contractors and to provide the information to the public in cooperation with the States. The Radon Contractor Proficiency (RCP) Program was developed to assist States, EPA Regions, local government officials, and the public in selecting contractors who have demonstrated their proficiency in reducing indoor radon levels. The program is managed by the EPA Office of Radiation Programs' Radon Division. Under the voluntary program, radon contractors demonstrate their proficiency by meeting specific Program requirements. Individual contractors who meet these requirements are then listed in periodic RCP Proficiency Reports

  6. checkCIF/PLATON (full publication check)

    Indian Academy of Sciences (India)

    editor handling your paper, to upload your CIF via our web site. PLATON version of 05/02/2014; check.def file version of 05/02/2014. Datablock I - ellipsoid plot http://vm02b.iucr.org/cgi-bin/checkcif_hkl.pl(第 3/4 页)2014-2-12 09:09:12 ...

  7. Proficiency testing for radionuclides

    International Nuclear Information System (INIS)

    Faanhof, A.; Kotze, O.; Louw, I.

    2010-01-01

    Proficiency testing in general is only useful when it suites a certain purpose. With regards to radionuclides basically three fields of interest can be identified: (I)Foodstuffs-Introduced in the early 1960's to monitor the fall-out of nuclear tests and eventually the pathway to foodstuffs fit for human consumption. The demand for analysis increased substantially after the Chernobyl accident. (II) Natural radioactivity-Associated with mining and mineral processing of uranium and thorium baring mineral resources throughout the world where the radionuclides from the natural uranium and thorium decay series are found to pose concern for professional and public exposure. (III) Artificial radioactivity-This category covers mostly the long-lived nuclides generated by nuclear fission of the fuel used in nuclear power plants, research reactors and nuclear bomb tests. All three categories require a specific approach for laboratories to test their ability to analyze specific radio nuclides of interest in a variety of matrices. In this lecture I will give a compiled overview of the required radioanalytical skills, analysis sensitivity needed and radionuclides of interest, with more specific emphasis on QAQC of water sources and the recommended monitoring approach. And provide information on available reference materials and organizations/institutes that provide regular exercises for participating laboratories. I will also briefly communicate on the advantages and disadvantages of ISO/IEC 17025 accreditation for test laboratories, which is these days a prerequisite in national and international trade especially where foodstuffs and mineral products are concerned.

  8. Computer proficiency questionnaire: assessing low and high computer proficient seniors.

    Science.gov (United States)

    Boot, Walter R; Charness, Neil; Czaja, Sara J; Sharit, Joseph; Rogers, Wendy A; Fisk, Arthur D; Mitzner, Tracy; Lee, Chin Chin; Nair, Sankaran

    2015-06-01

    Computers and the Internet have the potential to enrich the lives of seniors and aid in the performance of important tasks required for independent living. A prerequisite for reaping these benefits is having the skills needed to use these systems, which is highly dependent on proper training. One prerequisite for efficient and effective training is being able to gauge current levels of proficiency. We developed a new measure (the Computer Proficiency Questionnaire, or CPQ) to measure computer proficiency in the domains of computer basics, printing, communication, Internet, calendaring software, and multimedia use. Our aim was to develop a measure appropriate for individuals with a wide range of proficiencies from noncomputer users to extremely skilled users. To assess the reliability and validity of the CPQ, a diverse sample of older adults, including 276 older adults with no or minimal computer experience, was recruited and asked to complete the CPQ. The CPQ demonstrated excellent reliability (Cronbach's α = .98), with subscale reliabilities ranging from .86 to .97. Age, computer use, and general technology use all predicted CPQ scores. Factor analysis revealed three main factors of proficiency related to Internet and e-mail use; communication and calendaring; and computer basics. Based on our findings, we also developed a short-form CPQ (CPQ-12) with similar properties but 21 fewer questions. The CPQ and CPQ-12 are useful tools to gauge computer proficiency for training and research purposes, even among low computer proficient older adults. © The Author 2013. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  9. National Radon Contractor Proficiency (RCP) program. Proficiency report, September 1991

    International Nuclear Information System (INIS)

    1991-09-01

    The primary objective of the U.S. Environmental Protection Agency's (EPA) efforts to address the indoor radon problem is to reduce radon levels in buildings throughout the country. Achieving this objective requires a nationwide supply of capable radon mitigation contractors. In the Indoor Radon Abatement Act of 1988, Congress authorized EPA to establish a program to evaluate radon mitigation contractors and to provide this information to the public in cooperation with the States. The Radon Contractor Proficiency (RCP) Program was developed to assist States, EPA Regions, local government officials, and the public in selecting contractors who have demonstrated their proficiency in reducing indoor radon levels. The program is managed by the EPA Office of Radiation Programs' Radon Division. Under this voluntary program, radon contractors demonstrate their proficiency by meeting specific Program requirements. Individual contractors who meet these requirements are then listed in the Report

  10. National Radon Contractor Proficiency (RCP) Program. Proficiency report, January 1992

    International Nuclear Information System (INIS)

    1992-01-01

    The primary objective of the U.S. Environmental Protection Agency's (EPA) efforts to address the indoor radon problem is to reduce radon levels in buildings throughout the country. Achieving the objective requires a nationwide supply of capable radon mitigation contractors. In the Indoor Radon Abatement Act of 1988, Congress authorized EPA to establish a program to evaluate radon mitigation contractors and to provide the information to the public in cooperation with the States. The Radon Contractor Proficiency (RCP) Program was developed to assist States, EPA Regions, local government officials, and the public in selecting contractors who have demonstrated their proficiency in reducing indoor radon levels. The program is managed by the EPA Office of Radiation Programs' Radon Division. Under the voluntary program, radon contractors demonstrate their proficiency by meeting specific Program requirements. Individual contractors who meet these requirements are then listed in the Report

  11. Language proficiency and nursing registration.

    Science.gov (United States)

    Müller, Amanda

    2016-02-01

    This discussion paper focuses on English proficiency standards for nursing registration in Australia, how Australia has dealt with the issue of language proficiency, and the factors which have led to the establishment of the current language standards. Also, this paper will provide a comparison of the two language tests that are currently accepted in Australia (OET and IELTS), including the appropriateness of these tests and the minimum standards used. The paper will also examine the use of educational background as an indicator of language proficiency. Finally, communication-based complaints in the post-registration environment will be explored, and some discussion will be provided about why pre-registration measures might have failed to prevent such problematic situations from occurring. Copyright © 2015 Elsevier Ltd. All rights reserved.

  12. Environmental Reality Check.

    Science.gov (United States)

    Manicone, Santo

    2001-01-01

    Discusses the importance of educational facilities conducting "reality check" self-audits to uncover the real truth behind underlying environmental problems. An environmental compliance multimedia checklist is included. (GR)

  13. check cif.pdf

    Indian Academy of Sciences (India)

    AMMIN

    Calculated. Reported. Volume ... PLAT094_ALERT_2_C Ratio of Maximum / Minimum Residual Density .... 3.24 Report ... checkCIF was carefully designed to identify outliers and unusual parameters, but every test has its limitations and alerts ...

  14. Goat production check list

    DEFF Research Database (Denmark)

    Henriksen, Jørgen; Nielsen, Mette Benedicte Olaf; Madsen, Jørgen

    2009-01-01

    This check list, financed by DanChurchAid, highlights all issues should be carefully investigated before investing in distribution of goats and in interventions to assist poor rural communities to improve their livelihood through goat production.......This check list, financed by DanChurchAid, highlights all issues should be carefully investigated before investing in distribution of goats and in interventions to assist poor rural communities to improve their livelihood through goat production....

  15. National Radon Contractor Proficiency Program. Proficiency report, October 1990

    International Nuclear Information System (INIS)

    1990-10-01

    The report lists those individual contractors in the United States who have met the requirements of the Radon Contractor Proficiency (RCP) Program as of August 18, 1990. These requirements are designed to provide minimum proficiency criteria for individuals who design and supervise the installation of radon mitigation systems in buildings. (Some States have more stringent requirements as part of their radon certification programs. The States should be consulted directly for details on their programs; see Section 5 for a list of State radon contacts). The RCP Program measures the proficiency of an individual contractor, not their company. Therefore, users of the report who select a mitigation firm should ensure that the services are provided by the listed contractor. The National RCP Program does not accredit mitigation contractors, nor does it certify, recommend, or endorse participating companies. Only the listed contractor, not their company of affilation, are deemed proficient. The inclusion of a contractor in the report should not be interpreted as a certification or accreditation of the individual or affiliated company

  16. Learning Strategies in Proficient and Less Proficient Readers in Medicine

    Science.gov (United States)

    Nemati, Majid; Nodoushan, Mohammad Ali Salmani; Ashrafzadeh, Anis

    2010-01-01

    The current study aimed to diagnose the probable significant differences in the use of language learning strategies among medical-text readers of opposite sex from different levels of proficiency. 120 (N = 120) participants were randomly selected from Azad Medical University of Mashhad: 60 medical students (age range 23-25; 30 = male and 30 =…

  17. Discrepancies between perceptions of English proficiency and ...

    African Journals Online (AJOL)

    multilingual awareness pedagogy” embedded in Dörnyei's (2009) L2 Motivational Self System theory. Key words: self-reported perceptions, language proficiency, English proficiency, multilingualism, pedagogy, resilience, L2 Motivational Self System ...

  18. An Accounting Writing Proficiency Survey

    Science.gov (United States)

    Firch, Tim; Campbell, Annhenrie; Filling, Steven; Lindsay, David H.

    2011-01-01

    Although there has been much discussion about improving college student writing with college-level courses, little is known about how accounting programs, in particular, are addressing the writing proficiency challenge. This study surveys the 852 accounting programs in the United States to identify the frequency and types of accounting writing…

  19. Check valves aging assessment

    International Nuclear Information System (INIS)

    Haynes, H.D.

    1991-01-01

    In support of the NRC Nuclear Plant Aging Research (NPAR) program, the Oak Ridge National Laboratory (ORNL) has carried out an assessment of several check value diagnostic monitoring methods, in particular, those based on measurements of acoustic emission, ultrasonics, and magnetic flux. The evaluations have focussed on the capabilities of each method to provide information useful in determining check valve aging and service wear effects, check valve failures, and undesirable operating modes. This paper describes the benefits and limitations associated with each method and includes recent laboratory and field test data, including data obtained from the vendors who recently participated in a comprehensive series of tests directed by a nuclear industry users group. In addition, as part of the ORNL Advanced Diagnostic Engineering Research and Development Center (ADEC), two novel nonintrusive monitoring methods were developed that provide several unique capabilities. These methods, based on external ac- an dc-magnetic monitoring are also described. None of the examined methods could, by themselves, monitor both the instantaneous position and motion of check valve internals and valve leakage; however, the combination of acoustic emission monitoring with one of the other methods provides the means to determine vital check valve operational information

  20. CMM Interim Check (U)

    Energy Technology Data Exchange (ETDEWEB)

    Montano, Joshua Daniel [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-03-23

    Coordinate Measuring Machines (CMM) are widely used in industry, throughout the Nuclear Weapons Complex and at Los Alamos National Laboratory (LANL) to verify part conformance to design definition. Calibration cycles for CMMs at LANL are predominantly one year in length. Unfortunately, several nonconformance reports have been generated to document the discovery of a certified machine found out of tolerance during a calibration closeout. In an effort to reduce risk to product quality two solutions were proposed – shorten the calibration cycle which could be costly, or perform an interim check to monitor the machine’s performance between cycles. The CMM interim check discussed makes use of Renishaw’s Machine Checking Gauge. This off-the-shelf product simulates a large sphere within a CMM’s measurement volume and allows for error estimation. Data was gathered, analyzed, and simulated from seven machines in seventeen different configurations to create statistical process control run charts for on-the-floor monitoring.

  1. Checking BEBC superconducting magnet

    CERN Multimedia

    CERN PhotoLab

    1974-01-01

    The superconducting coils of the magnet for the 3.7 m Big European Bubble Chamber (BEBC) had to be checked, see Annual Report 1974, p. 60. The photo shows a dismantled pancake. By December 1974 the magnet reached again the field design value of 3.5 T.

  2. [Memory Checking Tests].

    Science.gov (United States)

    Hart, Joseph T.

    Two basic tests for checking memory skills are included in these appendices. The first, the General Information Test, uses the same 150 items for each of its two versions. One version is a completion-type test which measures recall by requiring the examinee to supply a specific response. The other version supplements each of the 150 items with…

  3. Check Sample Abstracts.

    Science.gov (United States)

    Alter, David; Grenache, David G; Bosler, David S; Karcher, Raymond E; Nichols, James; Rajadhyaksha, Aparna; Camelo-Piragua, Sandra; Rauch, Carol; Huddleston, Brent J; Frank, Elizabeth L; Sluss, Patrick M; Lewandrowski, Kent; Eichhorn, John H; Hall, Janet E; Rahman, Saud S; McPherson, Richard A; Kiechle, Frederick L; Hammett-Stabler, Catherine; Pierce, Kristin A; Kloehn, Erica A; Thomas, Patricia A; Walts, Ann E; Madan, Rashna; Schlesinger, Kathie; Nawgiri, Ranjana; Bhutani, Manoop; Kanber, Yonca; Abati, Andrea; Atkins, Kristen A; Farrar, Robert; Gopez, Evelyn Valencerina; Jhala, Darshana; Griffin, Sonya; Jhala, Khushboo; Jhala, Nirag; Bentz, Joel S; Emerson, Lyska; Chadwick, Barbara E; Barroeta, Julieta E; Baloch, Zubair W; Collins, Brian T; Middleton, Owen L; Davis, Gregory G; Haden-Pinneri, Kathryn; Chu, Albert Y; Keylock, Joren B; Ramoso, Robert; Thoene, Cynthia A; Stewart, Donna; Pierce, Arand; Barry, Michelle; Aljinovic, Nika; Gardner, David L; Barry, Michelle; Shields, Lisa B E; Arnold, Jack; Stewart, Donna; Martin, Erica L; Rakow, Rex J; Paddock, Christopher; Zaki, Sherif R; Prahlow, Joseph A; Stewart, Donna; Shields, Lisa B E; Rolf, Cristin M; Falzon, Andrew L; Hudacki, Rachel; Mazzella, Fermina M; Bethel, Melissa; Zarrin-Khameh, Neda; Gresik, M Vicky; Gill, Ryan; Karlon, William; Etzell, Joan; Deftos, Michael; Karlon, William J; Etzell, Joan E; Wang, Endi; Lu, Chuanyi M; Manion, Elizabeth; Rosenthal, Nancy; Wang, Endi; Lu, Chuanyi M; Tang, Patrick; Petric, Martin; Schade, Andrew E; Hall, Geraldine S; Oethinger, Margret; Hall, Geraldine; Picton, Avis R; Hoang, Linda; Imperial, Miguel Ranoa; Kibsey, Pamela; Waites, Ken; Duffy, Lynn; Hall, Geraldine S; Salangsang, Jo-Anne M; Bravo, Lulette Tricia C; Oethinger, Margaret D; Veras, Emanuela; Silva, Elvia; Vicens, Jimena; Silva, Elvio; Keylock, Joren; Hempel, James; Rushing, Elizabeth; Posligua, Lorena E; Deavers, Michael T; Nash, Jason W; Basturk, Olca; Perle, Mary Ann; Greco, Alba; Lee, Peng; Maru, Dipen; Weydert, Jamie Allen; Stevens, Todd M; Brownlee, Noel A; Kemper, April E; Williams, H James; Oliverio, Brock J; Al-Agha, Osama M; Eskue, Kyle L; Newlands, Shawn D; Eltorky, Mahmoud A; Puri, Puja K; Royer, Michael C; Rush, Walter L; Tavora, Fabio; Galvin, Jeffrey R; Franks, Teri J; Carter, James Elliot; Kahn, Andrea Graciela; Lozada Muñoz, Luis R; Houghton, Dan; Land, Kevin J; Nester, Theresa; Gildea, Jacob; Lefkowitz, Jerry; Lacount, Rachel A; Thompson, Hannis W; Refaai, Majed A; Quillen, Karen; Lopez, Ana Ortega; Goldfinger, Dennis; Muram, Talia; Thompson, Hannis

    2009-02-01

    The following abstracts are compiled from Check Sample exercises published in 2008. These peer-reviewed case studies assist laboratory professionals with continuing medical education and are developed in the areas of clinical chemistry, cytopathology, forensic pathology, hematology, microbiology, surgical pathology, and transfusion medicine. Abstracts for all exercises published in the program will appear annually in AJCP.

  4. Additional considerations regarding the choice of measurement control check frequency

    International Nuclear Information System (INIS)

    Bruckner, L.A.

    1993-01-01

    In a previous paper, factors involved in the choice of frequency of instrument measurement control checks were presented. Unfortunately, some discussions were inadvertently omitted from the paper during the process of review, editing and printing. That material is presented here

  5. Aberrant PO2 values in proficiency testing.

    Science.gov (United States)

    Fonzi, C E; Clausen, J L; Mahoney, J

    1993-03-01

    We prospectively determined the frequency of aberrant vials of fluorocarbon/buffer used for proficiency testing of measurements of pH, PCO2, and PO2, using 20 duplicate vials from 12 lots of fluorocarbon/buffer and two arterial blood gas analyzers in eight reference laboratories. We defined aberrant vials as vials for which both duplicate measurements differed from the mean value of repeated measurements for the specific instrument (for each lot of testing materials) by > 0.04 for pH, > 10% of the mean or 3.0 mm Hg, whichever was greater, for PCO2; or > 10% of the mean or 6 mm Hg, whichever was greater, for PO2. Four of 1620 vials (0.25%) were aberrant, all based on PO2 measurements (range of mean values: pH, 7.181-7.631; PCO2, 12.7-65.9; PO2, 32.5-150.1) were 0.0055 for pH, 0.67 mm Hg for PCO2, and 1.65 mm Hg for PO2. Deliberate contamination of the fluorocarbon emulsion with room air, as might occur during sampling from the vial, indicated that only minor increases in PO2 (e.g., 1.0 mm Hg at PO2 of 56 mm Hg) occur when samples are aspirated. Larger increases in PO2 (mean 7.1 mm Hg at a PO2 of 66 mm Hg) occurred when the syringe samples were contaminated with room air. We conclude that isolated aberrant measurements of PO2 in blood gas proficiency testing attributable to vial contents can occur, but the frequency is very low.

  6. Swing check valve

    International Nuclear Information System (INIS)

    Eminger, H.E.

    1977-01-01

    A swing check valve which includes a valve body having an inlet and outlet is described. A recess in the valve body designed to hold a seal ring and a check valve disc swingable between open and closed positions. The disc is supported by a high strength wire secured at one end in a support spacer pinned through bearing blocks fixed to the valve body and at its other end in a groove formed on the outer peripheral surface of the disc. The parts are designed and chosen such to provide a lightweight valve disc which is held open by minimum velocity of fluid flowing through the valve which thus reduces oscillations and accompanying wear of bearings supporting the valve operating parts. (Auth.)

  7. Calibration of radiation monitoring instruments

    International Nuclear Information System (INIS)

    1973-01-01

    Radiation protection is dependent on good radiation monitoring, and properly calibrated instruments are essential for this work. Simple procedures for periodically checking and recalibrating different kinds of radiation monitoring instruments are shown in this training film

  8. Calibration of "Babyline" RP instruments

    CERN Multimedia

    2015-01-01

      If you have old RP instrumentation of the “Babyline” type, as shown in the photo, please contact the Radiation Protection Group (Joffrey Germa, 73171) to have the instrument checked and calibrated. Thank you. Radiation Protection Group

  9. Calibration of radiation monitoring instruments

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1974-12-31

    Radiation protection is dependent on good radiation monitoring, and properly calibrated instruments are essential for this work. Simple procedures for periodically checking and recalibrating different kinds of radiation monitoring instruments are shown in this training film

  10. Model Checking Feature Interactions

    DEFF Research Database (Denmark)

    Le Guilly, Thibaut; Olsen, Petur; Pedersen, Thomas

    2015-01-01

    This paper presents an offline approach to analyzing feature interactions in embedded systems. The approach consists of a systematic process to gather the necessary information about system components and their models. The model is first specified in terms of predicates, before being refined to t...... to timed automata. The consistency of the model is verified at different development stages, and the correct linkage between the predicates and their semantic model is checked. The approach is illustrated on a use case from home automation....

  11. Magnetically operated check valve

    Science.gov (United States)

    Morris, Brian G.; Bozeman, Richard J., Jr.

    1994-06-01

    A magnetically operated check valve is disclosed. The valve is comprised of a valve body and a movable poppet disposed therein. A magnet attracts the poppet to hold the valve shut until the force of fluid flow through the valve overcomes the magnetic attraction and moves the poppet to an unseated, open position. The poppet and magnet are configured and disposed to trap a magnetically attracted particulate and prevent it from flowing to a valve seating region.

  12. Knowledge Management and Organizational Proficiency with NPP

    International Nuclear Information System (INIS)

    Marler, M.

    2016-01-01

    Full text: The pace of new NPP construction, startup, and operation is straining the supply of proficient operators, technicians, and engineers. This technical brief explains an approach implemented by a US nuclear utility to capture and transfer knowledge possessed by proficient workers to new workers using the VISION learning content management system. This approach could also be used to accelerate worker proficiency in new NPP organizations. (author

  13. Magnetic Check Valve

    Science.gov (United States)

    Morris, Brian G.; Bozeman, Richard J., Jr.

    1994-01-01

    Poppet in proposed check valve restored to closed condition by magnetic attraction instead of spring force. Oscillations suppressed, with consequent reduction of wear. Stationary magnetic disk mounted just upstream of poppet, also containing magnet. Valve body nonmagnetic. Forward pressure or flow would push poppet away from stationary magnetic disk so fluid flows easily around poppet. Stop in valve body prevents poppet from being swept away. When flow stopped or started to reverse, magnetic attraction draws poppet back to disk. Poppet then engages floating O-ring, thereby closing valve and preventing reverse flow. Floating O-ring facilitates sealing at low loads.

  14. Check, check, double check: checking the autopilot causes distrust : Experimental studies on the effects of compulsive perseveration

    NARCIS (Netherlands)

    Dek, E.C.P.

    2015-01-01

    Obsessive-compulsive disorder (OCD) is characterized by persistent doubt. The majority of patients with OCD engage in repeated checking to reduce these feelings of uncertainty. However, numerous studies demonstrated that repetitive behavior ironically increases uncertainty: perseverative checking

  15. The development and psychometric properties of the American sign language proficiency assessment (ASL-PA).

    Science.gov (United States)

    Maller, S; Singleton, J; Supalla, S; Wix, T

    1999-01-01

    We describe the procedures for constructing an instrument designed to evaluate children's proficiency in American Sign Language (ASL). The American Sign Language Proficiency Assessment (ASL-PA) is a much-needed tool that potentially could be used by researchers, language specialists, and qualified school personnel. A half-hour ASL sample is collected on video from a target child (between ages 6 and 12) across three separate discourse settings and is later analyzed and scored by an assessor who is highly proficient in ASL. After the child's language sample is scored, he or she can be assigned an ASL proficiency rating of Level 1, 2, or 3. At this phase in its development, substantial evidence of reliability and validity has been obtained for the ASL-PA using a sample of 80 profoundly deaf children (ages 6-12) of varying ASL skill levels. The article first explains the item development and administration of the ASL-PA instrument, then describes the empirical item analysis, standard setting procedures, and evidence of reliability and validity. The ASL-PA is a promising instrument for assessing elementary school-age children's ASL proficiency. Plans for further development are also discussed.

  16. Repeated checking causes memory distrust

    NARCIS (Netherlands)

    van den Hout, M.; Kindt, M.

    2003-01-01

    This paper attempts to explain why in obsessive-compulsive disorder (OCD) checkers distrust in memory persists despite extensive checking. It is argued that: (1) repeated checking increases familiarity with the issues checked; (2) increased familiarity promotes conceptual processing which inhibits

  17. Parallel Algorithms for Model Checking

    NARCIS (Netherlands)

    van de Pol, Jaco; Mousavi, Mohammad Reza; Sgall, Jiri

    2017-01-01

    Model checking is an automated verification procedure, which checks that a model of a system satisfies certain properties. These properties are typically expressed in some temporal logic, like LTL and CTL. Algorithms for LTL model checking (linear time logic) are based on automata theory and graph

  18. [Laboratory accreditation and proficiency testing].

    Science.gov (United States)

    Kuwa, Katsuhiko

    2003-05-01

    ISO/TC 212 covering clinical laboratory testing and in vitro diagnostic test systems will issue the international standard for medical laboratory quality and competence requirements, ISO 15189. This standard is based on the ISO/IEC 17025, general requirements for competence of testing and calibration laboratories and ISO 9001, quality management systems-requirements. Clinical laboratory services are essential to patient care and therefore should be available to meet the needs of all patients and clinical personnel responsible for human health care. If a laboratory seeks accreditation, it should select an accreditation body that operates according to this international standard and in a manner which takes into account the particular requirements of clinical laboratories. Proficiency testing should be available to evaluate the calibration laboratories and reference measurement laboratories in clinical medicine. Reference measurement procedures should be of precise and the analytical principle of measurement applied should ensure reliability. We should be prepared to establish a quality management system and proficiency testing in clinical laboratories.

  19. Motor Proficiency in Young Children

    Directory of Open Access Journals (Sweden)

    Fotini Venetsanou

    2016-01-01

    Full Text Available This study aimed to examine motor proficiency in young children, focusing on potential gender differences. For that purpose, the Bruininks-Oseretsky Test of Motor Proficiency–Long Form (BOTMP-LF was administered to 540 children (272 boys, 4½ to 6 years old. First, the 2 (sex × 4 (age groups ANOVA computed on children’s total BOTMP-LF scores showed that age had a statistically significant effect, whereas gender did not. Second, the one-way MANCOVA applied on subtest scores, with age as covariate, revealed statistical significant gender differences; however, η2 values were found to be small or moderate. Finally, the MANCOVA applied on items where significant gender differences have been reported showed a significant effect of gender. Nonetheless, η2 values exceeded the limit of practical significance only on two items (“standing on preferred leg on floor”, “throwing a ball at a target with preferred hand” that are associated with gender-stereotyped activities. It can be concluded that (a besides statistical significance, effect sizes should be examined for the results of a study to be adequately interpreted; (b young boys’ and girls’ motor proficiency is similar rather than different. Gender differences in specific skills should be used for movement programs to be individualized.

  20. A Study of Turkish High School Students' Burnout and Proficiency Levels in Relation to Their Sex

    Science.gov (United States)

    Yeni Palabiyik, Pinar

    2014-01-01

    The present study examines high school students' burnout levels. The main aims of the study are to investigate whether their burnout levels vary according to gender and grade levels, and to check the correlation between overall burnout levels and their English language proficiency attained with a specific test. The study followed a quantitative…

  1. Proficiency test for aflatoxin in pig feed

    NARCIS (Netherlands)

    Elbers, I.J.W.; Nijs, de W.C.M.

    2015-01-01

    Proficiency testing is conducted to provide laboratories with a powerful tool to evaluate and demonstrate the reliability of the data that are produced. Next to validation and accreditation, proficiency testing is an important requirement of the EU Additional Measures Directive 93/99/EEC [1] and is

  2. Proficiency study for quinolones in egg

    NARCIS (Netherlands)

    Berendsen, B.J.A.; Stolker, A.A.M.

    2008-01-01

    The aim of this proficiency study was to give laboratories the possibility to evaluate or demonstrate their competence for the analysis of quinolones in egg. Furthermore the specificity of the applied methods is evaluated by including possibly interfering compounds in the proficiency study. This

  3. Measuring receptive collocational competence across proficiency ...

    African Journals Online (AJOL)

    The present study investigates (i) English as Foreign Language (EFL) learners' receptive collocational knowledge growth in relation to their linguistic proficiency level; (ii) how much receptive collocational knowledge is acquired as linguistic proficiency develops; and (iii) the extent to which receptive knowledge of ...

  4. Proficiency test for allergens in food 2014

    NARCIS (Netherlands)

    Bremer, M.G.E.G.; Alamenou, P.; Elbers, I.J.W.

    2015-01-01

    In the autumn of 2014 a proficiency test for allergens in baby cereal was organized by RIKILT, Wageningen UR. This PT-test enabled laboratories to evaluate their competence for the analysis of allergens in baby cereal. Both quantitative and qualitative methods were accepted. The proficiency test was

  5. Language proficiency: Current strategies, future remedies ...

    African Journals Online (AJOL)

    Language proficiency among young South Africans is low. This is true not only of mother tongue speakers of English and Afrikaans, but also, and especially, of non-mother tongue speakers of English, among whom language proficiency levels raise serious concern. Some examples are given to illustrate the importance of ...

  6. A Contextualized Approach to Describing Oral Proficiency.

    Science.gov (United States)

    Chalhoub-Deville, Micheline

    1995-01-01

    Studies learners' second-language (L2) oral proficiency, incorporating an interview, a narration, and a read-aloud. Results show that the nature of the L2 oral construct is not constant. The article concludes that proficiency researchers should use dimensions empirically derived according to the specific elicitation task and audience. (53…

  7. Language Learning Strategy Use across Proficiency Levels

    Science.gov (United States)

    Zarei, Abbas, Ali; Baharestani, Nooshin

    2014-01-01

    To investigate the use of language learning strategies (LLS) by Iranian EFL learners across proficiency levels, a total of 180 Iranian adult female EFL learners were selected and divided into three different proficiency level groups. To collect data, Oxford's (1990) Strategy Inventory for Language Learning (SILL) was used. One-way ANOVA procedures…

  8. CIEMAT interlaboratories comparison of the results obtained in the proficiency test run by IAEA

    International Nuclear Information System (INIS)

    Gasco, C.; Anton, M. P.; Alvarez, A.; Navarro, N.; Meral, J.; Gonzalez, A.; Higueras Lafaja, E.

    2000-01-01

    This report contains the results obtained by two different laboratories from CIEMAT after participating in the Proficiency Test organised by IAEA (International Atomic Energy Agency) in 1999. This test involves the analysis of fly ashes containing natural radionuclides and different amounts of added transuranics. The extraction techniques, counting methods and results obtained are detailed. This type of test are used for the labs to achieve their accreditation and check the reliability of the procedures routinely employed. (Author) 4 refs

  9. Measuring Pilot Proficiency on an Instrument Training Maneuver

    Science.gov (United States)

    1977-08-01

    Psychological research on pilot training. Was--sngton, D. C.: Army Air Force Aviation Psychology Program, Research Report No. 8, 1947. Ericksen, S. C. A review...10 15 20 su m I S =. 24 S". **muz . Atars &f 300ft. of clim (Mappro&W~may 15300’) a&& at J.5W f t. Soabding P. Mmcav ad nmur4 thwouoww.c tb. &*ou 25 mvi

  10. Welfare Checks, Drug Consumption, and Health: Evidence from Vancouver Injection Drug Users

    Science.gov (United States)

    Riddell, Chris; Riddell, Rosemarie

    2006-01-01

    This paper investigates the link between welfare payments and drug use among injection drug users. The authors find an increase in the likelihood of an overdose in the days following check arrival, and in the probability of leaving the hospital against medical advice (AMA) on check day. Using the check arrival date as an instrument, we estimate…

  11. Measuring receptive collocational competence across proficiency levels

    Directory of Open Access Journals (Sweden)

    Déogratias Nizonkiza

    2015-12-01

    Full Text Available The present study investigates, (i English as Foreign Language (EFL learners’ receptive collocational knowledge growth in relation to their linguistic proficiency level; (ii how much receptive collocational knowledge is acquired as proficiency develops; and (iii the extent to which receptive knowledge of collocations of EFL learners varies across word frequency bands. A proficiency measure and a collocation test were administered to English majors at the University of Burundi. Results of the study suggest that receptive collocational competence develops alongside EFL learners’ linguistic proficiency; which lends empirical support to Gyllstad (2007, 2009 and Author (2011 among others, who reported similar findings. Furthermore, EFL learners’ collocations growth seems to be quantifiable wherein both linguistic proficiency level and word frequency occupy a crucial role. While more gains in terms of collocations that EFL learners could potentially add as a result of change in proficiency are found at lower levels of proficiency; collocations of words from more frequent word bands seem to be mastered first, and more gains are found at more frequent word bands. These results confirm earlier findings on the non-linearity nature of vocabulary growth (cf. Meara 1996 and the fundamental role played by frequency in word knowledge for vocabulary in general (Nation 1983, 1990, Nation and Beglar 2007, which are extended here to collocations knowledge.

  12. A New Tool for Assessing Mobile Device Proficiency in Older Adults: The Mobile Device Proficiency Questionnaire.

    Science.gov (United States)

    Roque, Nelson A; Boot, Walter R

    2018-02-01

    Mobile device proficiency is increasingly required to participate in society. Unfortunately, there still exists a digital divide between younger and older adults, especially with respect to mobile devices (i.e., tablet computers and smartphones). Training is an important goal to ensure that older adults can reap the benefits of these devices. However, efficient/effective training depends on the ability to gauge current proficiency levels. We developed a new scale to accurately assess the mobile device proficiency of older adults: the Mobile Device Proficiency Questionnaire (MDPQ). We present and validate the MDPQ and a short 16-question version of the MDPQ (MDPQ-16). The MDPQ, its subscales, and the MDPQ-16 were found to be highly reliable and valid measures of mobile device proficiency in a large sample. We conclude that the MDPQ and MDPQ-16 may serve as useful tools for facilitating mobile device training of older adults and measuring mobile device proficiency for research purposes.

  13. Developing Adaptive Proficiency in Special Forces Officers

    National Research Council Canada - National Science Library

    White, Susan S; Mueller-Hanson, Rose A; Dorsey, David W; Pulakos, Elaine D; Wisecarver, Michelle M; Deagle, Edwin A., III; Mendini, Kip G

    2005-01-01

    Adaptive proficiency is critical for operating in the dynamic Special Forces (SF) mission environment and a recent focus on this requirement has resulted in a greater emphasis on adaptability in current training for SF...

  14. Compositional and Quantitative Model Checking

    DEFF Research Database (Denmark)

    Larsen, Kim Guldstrand

    2010-01-01

    This paper gives a survey of a composition model checking methodology and its succesfull instantiation to the model checking of networks of finite-state, timed, hybrid and probabilistic systems with respect; to suitable quantitative versions of the modal mu-calculus [Koz82]. The method is based...

  15. Diagnostic information in compliance checking

    NARCIS (Netherlands)

    Ramezani Taghiabadi, E.; Fahland, D.; Aalst, van der W.M.P.

    2012-01-01

    Compliance checking is gaining importance as today's organizations need to show that operational processes are executed in a controlled manner while satisfying predefined (legal) requirements. Deviations may be costly and expose the organization to severe risks. Compliance checking is of growing

  16. Instruments used to measure or check {alpha}, {beta}, {gamma} activity and neutron emission in the course of processing ore or irradiated fuel; Appareils de mesure ou de controle {alpha}, {beta}, {gamma}, n, des circuits des usines de traitement du minerai ou du combustible irradie

    Energy Technology Data Exchange (ETDEWEB)

    Blanc, A; Brunet, M; Kermagoret, M; Labeyrie, J; Roux, G; Vasseur, J; Weil, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1959-07-01

    One of the methods checking ores in the course of treatment is the rapid quantitative determination of thorium. This measurement is carried out by means of a scintillation instrument which shows the {beta} and {alpha} coincidences of ThC and ThC'. The treatment of irradiated fuel is accompanied by a large number of radioactive checks relative to the performance of the fixation and elution operations of uranium in the ion exchangers, to the concentration of radioactivity of effluent sent from the plant into watercourses. The operations of fixation and elution of the uranium are checked automatically by an instrument which takes a sample of 5 cm{sup 3} of solution, evaporates it and measures its activity every 10 or 20 minutes. Plutonium concentrations are measured: - in the presence of strong {beta} {gamma} activities, by means of rotating cylinder detectors; - in the presence of weak {beta} {gamma} activities, by means of {alpha} detectors scanning a constant level liquid surface; - by means of fission chambers relatively insensitive to {gamma}. Fission product concentrations are measured by chambers, counters or scintillators, according to the amount of {gamma} activity present. Finally, the activity of effluent to be emptied into watercourses is checked by means of a scintillation instrument, which measures the {alpha} activity on the one hand, and on the other hand the {beta} {gamma} activity of residue from a 100 cm{sup 3} sample taken and evaporated in 20 minutes. (author) [French] Parmi les controles relatifs au minerai en cours de traitement, figure le dosage rapide de thorium. Cette mesure est realisee au moyen d'un appareillage a scintillation qui met en evidence la coincidence des emissions {beta} et {alpha} du ThC et du ThC'. Le traitement des combustibles irradies s'accompagne d'un grand nombre de controles radioactifs portant sur le fonctionnement des operations de fixation et d'elution de l'uranium dans les echangeurs d'ions, sur la concentration du

  17. Energy Audit Checks - A socioeconomic assessment; Energikartlaeggningscheckar - En samhaellsekonomisk utvaerdering

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-09-01

    This review is part of the Swedish Energy Agency's work with skills and methodology development on economic analyzes. The present socioeconomic analysis is the first of its kind to evaluate the current support for energy audit checks and is based on the instrument's purpose, goals and obstacles. Cost effectiveness is the main focus, as well as a description of the instrument's benefits and costs. The evaluation also aims to further develop the instrument in conjunction with the implementation of energy efficiency directive. Proposals for new instruments have however not been part of the mission.

  18. Students’ Perceived Level of English Proficiency in Secondary Schools in Dodoma, Tanzania

    Directory of Open Access Journals (Sweden)

    Lazarus Ndiku Makewa

    2013-07-01

    Full Text Available This paper looked at students’ perceived level of English proficiency among Dodoma secondary schools in Tanzania. Factors like attitude, anxiety, classroom activities, motivation, and learning resources were considered as influencing English learning. The study was guided by three theories: Input Hypothesis, Inter-language and Vygotsky’s theory of value. Correlation design was used to describe the association between the student and teacher-related factors and students’ perceived level of English proficiency. Purposive sampling was used to select 300 form three students. Questionnaires were used to collect data from the participants. Reliability of the research instrument was determined by conducting a pilot study. Pearson Descriptive statistics and Kendall’s Tau-b were used to analyze the data. The study revealed that the students’ perceived level of proficiency in spoken English was average. The findings indicated a significant positive correlation between perceived English proficiency and attitude toward the English language, classroom activities, teacher motivation, and classroom environment. It is suggested that further studies integrate qualitative research methods to the research design in order to get an in-depth understanding of students’ perception on English proficiency.

  19. Unique Contributions of Maternal Reading Proficiency to Predicting Children's Preschool Receptive Vocabulary and Reading Proficiency

    Science.gov (United States)

    Phillips, Linda M.; Norris, Stephen P.; Hayward, Denyse V.; Lovell, Meridith A.

    2017-01-01

    This study investigated whether mothers' measured reading proficiency and their educational level predict, over and above each other, their children's receptive vocabulary and reading proficiency when confounding factors of speaking a minority language, ethnicity, number of children in the family, and marital and employment status are controlled.…

  20. Assessment of Preschoolers' Gross Motor Proficiency: Revisiting Bruininks-Oseretsky Test of Motor Proficiency

    Science.gov (United States)

    Lam, Hazel Mei Yung

    2011-01-01

    Literature reveals that there are very few validated motor proficiency tests for young children. According to Gallahue and Ozmun, the Bruininks-Oseretsky Test of Motor Proficiency is a valid test. However, manipulative skills, which are classified as gross motor skills by most motor development specialists, are only tested in the Upper Limb…

  1. Treasury Check Verification Query (TCVQ)

    Data.gov (United States)

    Social Security Administration — The TCVQ system determines the SSN of an individual whose check has been returned to a local field office. The FO is able to request this information via the TCVQ...

  2. Model Checking Algorithms for CTMDPs

    DEFF Research Database (Denmark)

    Buchholz, Peter; Hahn, Ernst Moritz; Hermanns, Holger

    2011-01-01

    Continuous Stochastic Logic (CSL) can be interpreted over continuoustime Markov decision processes (CTMDPs) to specify quantitative properties of stochastic systems that allow some external control. Model checking CSL formulae over CTMDPs requires then the computation of optimal control strategie...

  3. Coverage Metrics for Model Checking

    Science.gov (United States)

    Penix, John; Visser, Willem; Norvig, Peter (Technical Monitor)

    2001-01-01

    When using model checking to verify programs in practice, it is not usually possible to achieve complete coverage of the system. In this position paper we describe ongoing research within the Automated Software Engineering group at NASA Ames on the use of test coverage metrics to measure partial coverage and provide heuristic guidance for program model checking. We are specifically interested in applying and developing coverage metrics for concurrent programs that might be used to support certification of next generation avionics software.

  4. 40 CFR 90.325 - Analyzer interference checks.

    Science.gov (United States)

    2010-07-01

    ... broadening the absorption band of the measured gas, and in CLD instruments by the interfering gas quenching... quench check. The two gases of concern for CLD (and HCLD) analyzers are CO2 and water vapor. Quench... the CO2 NDIR and CLD (or HCLD). Record the CO2 and NO values as “b” and “c” respectively. (iii) Shut...

  5. 42 CFR 493.1254 - Standard: Maintenance and function checks.

    Science.gov (United States)

    2010-10-01

    ...'s equipment, instruments, or test systems. The laboratory must perform and document the following... available and modified by the laboratory, or maintenance and function check protocols are not provided by the manufacturer. The laboratory must do the following: (1)(i) Establish a maintenance protocol that...

  6. Beyond English Proficiency: Rethinking Immigrant Integration

    Science.gov (United States)

    Akresh, Ilana Redstone; Massey, Douglas S.; Frank, Reanne

    2014-01-01

    We develop and test a conceptual model of English language acquisition and the strength of the latter in predicting social and cultural assimilation. We present evidence that the path to English proficiency begins with exposure to English in the home country and on prior U.S. trips. English proficiency, then, has direct links to the intermediate migration outcomes of occupational status in the U.S., the amount of time in the U.S. since the most recent trip, and the co-ethnic residential context in the U.S. In turn, pre-migration characteristics and the intermediate characteristics work in tandem with English proficiency to determine social assimilation in the U.S., while cultural assimilation is primarily determined by pre-migration habits. A shift in focus to English use is desirable in studies of immigrant integration. PMID:24576636

  7. Measurement control program for NDA instruments

    International Nuclear Information System (INIS)

    Hsue, S.T.; Marks, T.

    1983-01-01

    Measurement control checks for nondestructive assay instruments have been a constant and continuing concern at Los Alamos National Laboratory. This paper summarizes the evolution of the measurement control checks in the various high-resolution gamma systems we have developed. In-plant experiences with these systems and checks will be discussed. Based on these experiences, a set of measurement control checks is recommended for high-resolution gamma-ray systems

  8. CAPD Software Development for Automatic Piping System Design: Checking Piping Pocket, Checking Valve Level and Flexibility

    International Nuclear Information System (INIS)

    Ari Satmoko; Edi Karyanta; Dedy Haryanto; Abdul Hafid; Sudarno; Kussigit Santosa; Pinitoyo, A.; Demon Handoyo

    2003-01-01

    One of several steps in industrial plant construction is preparing piping layout drawing. In this drawing, pipe and all other pieces such as instrumentation, equipment, structure should be modeled A software called CAPD was developed to replace and to behave as piping drafter or designer. CAPD was successfully developed by adding both subprogram CHKUPIPE and CHKMANV. The first subprogram can check and gives warning if there is piping pocket in the piping system. The second can identify valve position and then check whether valve can be handled by operator hand The main program CAPD was also successfully modified in order to be capable in limiting the maximum length of straight pipe. By limiting the length, piping flexibility can be increased. (author)

  9. [Infection prevention check-in and infection prevention check-out to prevent nosocomial infections].

    Science.gov (United States)

    Kramer, A; Schilling, M; Heidecke, C D

    2010-02-01

    A precondition for the success of the prevention of SSI is the complete realisation of the proven anti-infective measures in form of the multi-barrier strategy or the so-called bundles. In daily practice it is important to follow the fixed instructions, i. e., to ensure a high compliance. In much the same way as an airline pilot or co-pilot must examine whether all instruments are functioning before each take-off, a comparable procedure should be developed as a pre-operative control for the observance of all -defined measures by the responsible surgeon and for the post-operative supervision by the patient. For the control of the observance of the defined pre-operative prevention measures, a check list with 12 items was developed, named the "infection prevention check-in". The check list is authorised by the responsible surgeon be-fore each operation. For the surveillance of the general hygiene in the post-operative period the "infection prevention check-out" with 14 items was developed. Thereby the patient is able to evaluate the staff's compliance with the hygienic measures at the time of dismissal. With the introduction of the check-lists a simple means is given to involve both the team of the surgeons and the ward staff, together with the patient, into the infection prophylaxis even more effectively. In order to assess the success of those measures, the influence on the rate of SSI is to be determined prospectively. Georg Thieme Verlag Stuttgart, New York.

  10. Organization of Proficiency Testing for Dairy Laboratories in Croatia, Bosnia and Herzegovina and Macedonia in Order to Improve Quality Assurance

    Directory of Open Access Journals (Sweden)

    Nataša Mikulec

    2009-06-01

    Full Text Available Participation in proficiency testing is not only an obligation for all analytical laboratories which tend to be credible, but also an opportunity to check how the results agree with the reference or assign value. The Reference Laboratory for Milk and Dairy Products of the Dairy Science Department, Faculty of Agriculture University of Zagreb, is itself incorporated in the proficiency testing organized by dairy laboratories from Germany, Italy, France, Switzerland and Slovenia. The aim is to find out its own accuracy and reliability in particular milk and dairy products analyses. On the basis of seven years experience of participating in proficiency testing, five years ago the Reference Laboratory started organizing its own proficiency testing for dairy laboratories in Croatia, Bosnia and Herzegovina and Macedonia for milk components such as milk fat, protein, lactose and somatic cells count. The results of the analyses have been statistically analyzed and, on the basis of Z-score, the successful measurements have been estimated. The aim of this paper is to demonstrate the organisation and data processing of proficiency testing for milk fat, protein, lactose and somatic cells count in milk for the involved dairy laboratories.

  11. The correlation between motor proficiency and physical activity in ...

    African Journals Online (AJOL)

    Lizl-Louise van Niekerk

    eOseretsky Test of Motor Proficiency 2 (BOT-2) for motor proficiency, and the International. Physical Activity ... Pienaar, 2007; Malina, 2012). ..... sults of Hardy, Reinten-Reynolds, Espinel, Zask, and Okely .... Journal of Psychiatric and Mental.

  12. Beam walking can detect differences in walking balance proficiency across a range of sensorimotor abilities.

    Science.gov (United States)

    Sawers, Andrew; Ting, Lena H

    2015-02-01

    The ability to quantify differences in walking balance proficiency is critical to curbing the rising health and financial costs of falls. Current laboratory-based approaches typically focus on successful recovery of balance while clinical instruments often pose little difficulty for all but the most impaired patients. Rarely do they test motor behaviors of sufficient difficulty to evoke failures in balance control limiting their ability to quantify balance proficiency. Our objective was to test whether a simple beam-walking task could quantify differences in walking balance proficiency across a range of sensorimotor abilities. Ten experts, ten novices, and five individuals with transtibial limb loss performed six walking trials across three different width beams. Walking balance proficiency was quantified as the ratio of distance walked to total possible distance. Balance proficiency was not significantly different between cohorts on the wide-beam, but clear differences between cohorts on the mid and narrow-beams were identified. Experts walked a greater distance than novices on the mid-beam (average of 3.63±0.04m verus 2.70±0.21m out of 3.66m; p=0.009), and novices walked further than amputees (1.52±0.20m; p=0.03). Amputees were unable to walk on the narrow-beam, while experts walked further (3.07±0.14m) than novices (1.55±0.26m; p=0.0005). A simple beam-walking task and an easily collected measure of distance traveled detected differences in walking balance proficiency across sensorimotor abilities. This approach provides a means to safely study and evaluate successes and failures in walking balance in the clinic or lab. It may prove useful in identifying mechanisms underlying falls versus fall recoveries. Copyright © 2015 Elsevier B.V. All rights reserved.

  13. From Universal Access to Universal Proficiency.

    Science.gov (United States)

    Lewis, Anne C.

    2003-01-01

    Panel of five education experts--Elliot Eisner, John Goodlad, Patricia Graham, Phillip Schlechty, and Warren Simons--answer questions related to recent school reform efforts, such as the No Child Left Behind Act, aimed at achieving universal educational proficiency. (PKP)

  14. Measuring receptive collocational competence across proficiency ...

    African Journals Online (AJOL)

    Kate H

    frequency bands. A proficiency measure and a collocation test were administered to English ... battery may negatively impact the test-takers' performance. ..... examples. The major finding is that raising learners' awareness constitutes the best way forward ..... Amsterdam: John Benjamins Publishing Company. Green, R.

  15. Foreign language proficiency and working memory capacity

    NARCIS (Netherlands)

    Noort, M.W.M.L. van den; Bosch, M.P.C.; Hugdahl, K.

    2006-01-01

    In this study, the hypothesis that working memory capacity interacts with (foreign) language proficiency was tested on multilinguals, who were native (L1) Dutch speakers, were fluent in their second (L2) language, German, and had recently started the acquisition of their third (L3) language,

  16. Proficiency test for paracitides in salmon muscle

    NARCIS (Netherlands)

    Elbers, I.J.W.

    2012-01-01

    The aim of this proficiency study was to give laboratories the possibility to evaluate or demonstrate their competence for the analysis of parasiticides in salmon muscle. This study also provided an evaluation of the methods applied for the quantitative analysis of parasiticides in salmon muscle.

  17. Proficiency Testing in Nondestructive Testing (NDT)

    International Nuclear Information System (INIS)

    Amry Amin Abbas; Suhairy Sani; Mohamad Pauzi Ismail; Abd Nassir Ibrahim

    2014-01-01

    Department of Standard Malaysia (DSM) launched myPTP programme on 31 December 2013 in accordance to ISO/IC 17043. The standard states the requirements for Proficiency Testing. The provider of these services is called Proficiency Testing Provider (PTP). The role of PTP is to compare the proficiency level between inspection bodies or laboratories. With the assistance of expert panel, the PTP will determine the assigned value as reference to be compared to the values obtained from the inspection bodies or laboratories. Quality wise, this services is important as participation will improve wuality of the inspection quality continuously and increase confidence level of client and improve safety level. Requirement of PT in NDT is mentioned in SC1.5- Specific Criteria for Accreditation of Mechanical Testing and Non-Destructive Testing (NDT) for MS ISO/IEC17025 and MTR2- MIBAS Technical Requirements for Accreditation of NDT. This paper explains and discusses the result of this proficiency test done on a number of NDT companies that participated. (author)

  18. It Really Works: Cultural Communication Proficiency.

    Science.gov (United States)

    Bennett, Ruth, Ed.

    This paper describes the cultural communication proficiency method of indigenous language instruction, developed at Humboldt State University's Center for Indian Community Development (California), and demonstrates the method with five Hupa lesson plans. The method is based on three principles: that Native American students learn by doing, learn…

  19. The Oral Proficiency Interview: A Research Agenda

    Science.gov (United States)

    Chalhoub-Deville, Micheline; Fulcher, Glenn

    2003-01-01

    Many researchers and practitioners maintain that ACTFL's efforts to improve instructional practices and promote proficiency assessments tied to descriptors of what learners can do in real life have contributed significantly to second language teaching and testing. Similar endeavors in the area of research, however, are critically needed. Focusing…

  20. 14 CFR 61.98 - Flight proficiency.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Flight proficiency. 61.98 Section 61.98 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIRMEN...) Navigation; (viii) Slow flight and stalls; (ix) Emergency operations; and (x) Postflight procedures. (2) For...

  1. 14 CFR 61.127 - Flight proficiency.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Flight proficiency. 61.127 Section 61.127 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIRMEN...; (x) High-altitude operations; and (xi) Postflight procedures. (2) For an airplane category rating...

  2. 34 CFR 300.27 - Limited English proficient.

    Science.gov (United States)

    2010-07-01

    ... 34 Education 2 2010-07-01 2010-07-01 false Limited English proficient. 300.27 Section 300.27... CHILDREN WITH DISABILITIES General Definitions Used in This Part § 300.27 Limited English proficient. Limited English proficient has the meaning given the term in section 9101(25) of the ESEA. (Authority: 20...

  3. Proverb Comprehension as a Function of Reading Proficiency in Preadolescents.

    Science.gov (United States)

    Nippold, Marilyn A.; Allen, Melissa M.; Kirsch, Dixon I.

    2001-01-01

    Proverb comprehension through reading was examined in 42 preadolescent students, 24 of whom were identified as "proficient readers," and 18 as "less proficient readers." Comprehension on both unfamiliar concrete and abstract proverbs was associated with reading proficiency, word knowledge, and analogical reasoning. (Contains references.)…

  4. Checking behavioral conformance of artifacts

    NARCIS (Netherlands)

    Fahland, D.; Leoni, de M.; Dongen, van B.F.; Aalst, van der W.M.P.

    2011-01-01

    The usefulness of process models (e.g., for analysis, improvement, or execution) strongly depends on their ability to describe reality. Conformance checking is a technique to validate how good a given process model describes recorded executions of the actual process. Recently, artifacts have been

  5. Reducing Lookups for Invariant Checking

    DEFF Research Database (Denmark)

    Thomsen, Jakob Grauenkjær; Clausen, Christian; Andersen, Kristoffer Just

    2013-01-01

    This paper helps reduce the cost of invariant checking in cases where access to data is expensive. Assume that a set of variables satisfy a given invariant and a request is received to update a subset of them. We reduce the set of variables to inspect, in order to verify that the invariant is still...

  6. Context-aware compliance checking

    NARCIS (Netherlands)

    Werf, van der J.M.E.M.; Verbeek, H.M.W.; Aalst, van der W.M.P.; Barros, A.; Gal, A.; Kindler, E.

    2012-01-01

    Organizations face more and more the burden to show that their business is compliant with respect to many different boundaries. The activity of compliance checking is commonly referred to as auditing. As information systems supporting the organization’s business record their usage, process mining

  7. The Mars Science Laboratory Organic Check Material

    Science.gov (United States)

    Conrad, Pamela G.; Eigenbrode, J. E.; Mogensen, C. T.; VonderHeydt, M. O.; Glavin, D. P.; Mahaffy, P. M.; Johnson, J. A.

    2011-01-01

    The Organic Check Material (OCM) has been developed for use on the Mars Science Laboratory mission to serve as a sample standard for verification of organic cleanliness and characterization of potential sample alteration as a function of the sample acquisition and portioning process on the Curiosity rover. OCM samples will be acquired using the same procedures for drilling, portioning and delivery as are used to study martian samples with The Sample Analysis at Mars (SAM) instrument suite during MSL surface operations. Because the SAM suite is highly sensitive to organic molecules, the mission can better verify the cleanliness of Curiosity's sample acquisition hardware if a known material can be processed through SAM and compared with the results obtained from martian samples.

  8. The Effects of an Extensive Reading Program on Improving English as Foreign Language Proficiency in University Level Education

    Science.gov (United States)

    Alzu'bi, Mohammad Akram

    2014-01-01

    This study aimed at investigating the impact of extensive reading on improving reading proficiency. The study tried to find the effect of ER on EFL student's reading, vocabulary and grammar. The researcher designed two instruments; a program based on the extensive reading strategy and general test. Forty-one university students who study English…

  9. The Effects of Type and Quantity of Input on Iranian EFL Learners’ Oral Language Proficiency

    Directory of Open Access Journals (Sweden)

    Zahra Hassanzadeh

    2014-05-01

    Full Text Available In the written texts on foreign language learning, a group of studies has stressed the function of learning context and learning chances for learners’ language input. The present thesis had two main goals: on the one hand, different types of input to which Iranian grade four high school EFL learners’ are exposed were looked at; on the other hand, the possible relationship between types and quantity of input and Iranian EFL learners’ oral proficiency was investigated. It was supposed that EFL learners who have access to more input will show better oral proficiency than those who do not have. Instruments used in the present study for the purpose of data collation included  PET test, researcher- made questionnaire, oral language proficiency test and face- to -face interview. Data were gathered from 50 Iranian female grade four high school foreign language learners who were selected from among 120 students whose score on PET test were +1SD from the mean score. The results of the Spearman rank –order correlation test for the types of input and oral language proficiency scores, showed that the participants’ oral proficiency score significantly correlated with the intended four sources of input including spoken (rho= 0.416, sig=0.003, written (rho= 0.364, sig=0.009, aural (rho= 0.343, sig=0.015 and visual or audio-visual types of input (rho= 0.47, sig=0.00. The findings of Spearman rank –order correlation test for the quantity of input and oral language proficiency scores also showed a significant relationship between quantity of input and oral language proficiency (rho= 0.543, sig= 0.00. The findings showed that EFL learners’ oral proficiency is significantly correlated with efficient and effective input. The findings may also suggest  answers to the question why most Iranian English learners fail to speak English fluently, which might be due to  lack of effective input. This may emphasize the importance of the types and quantity of

  10. 27 CFR 70.101 - Bad checks.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Bad checks. 70.101 Section....101 Bad checks. If any check or money order in payment of any amount receivable under Title 26 of the... appropriate TTB officer that such check was tendered in good faith and that such person had reasonable cause...

  11. Model Checking Markov Chains: Techniques and Tools

    NARCIS (Netherlands)

    Zapreev, I.S.

    2008-01-01

    This dissertation deals with four important aspects of model checking Markov chains: the development of efficient model-checking tools, the improvement of model-checking algorithms, the efficiency of the state-space reduction techniques, and the development of simulation-based model-checking

  12. Construct Validity evidence for the Intercultural Readiness Check against the Multicultural Personality Questionnaire.

    NARCIS (Netherlands)

    Van der Zee, KI; Brinkmann, U

    The psychometric qualities of the intercultural readiness check (IRC) were evaluated against an existing instrument for multicultural effectiveness: the Multicultural Personality Questionnaire (MPQ). The IRC has scales for intercultural sensitivity, intercultural communication, intercultural

  13. Construct validity evidence for the intercultural readiness check against the multicultural personality questionnaire

    NARCIS (Netherlands)

    Van der Zee, K.I.; Brinkmann, Ursula

    The psychometric qualities of the intercultural readiness check (IRC) were evaluated against an existing instrument for multicultural effectiveness: the Multicultural Personality Questionnaire (MPQ). The IRC has scales for intercultural sensitivity, intercultural communication, intercultural

  14. Report on the IAEA-CU-2006-06 proficiency test on the determination of major, minor and trace elements in ancient Chinese ceramic

    International Nuclear Information System (INIS)

    Shakhashiro, A.; Trinkl, A.; Toervenyi, A.; Zeiller, E.; Benesch, T.; Sansone, U.

    2006-10-01

    The report summarises the results of a proficiency test conducted under the IAEA co-ordinated research project (CRP) F.2.30.23, ''Applications of nuclear analytical techniques to investigate the authenticity of art objects''. The proficiency test was organized and conducted by the Reference Materials Group of the Chemistry Unit (Physics, Chemistry and Instrumentation Laboratory) of the IAEA's analytical laboratories located in Seibersdorf (Austria). The objective of the CRP is to explore new fields of application for nuclear analytical techniques in art and archaeology. It will help to foster collaboration between museum conservators and analytical researchers. The dissemination of information on applications of advanced analytical techniques to art objects will stimulate the use of these techniques in developing Member States and help in conservation and recovery of national heritage. Historical artefacts and art objects are traded world wide and represent a potential source for forgery and false labelling. The market is huge and a large part of the trade is going from developing countries to the developed world where strict regulations can only be applied if convenient methods for checking the authenticity were available. Portable XRF (X-ray fluorescence) instruments for rapid screening analysis and PGNAA (Prompt Gamma Neutron Activation Analysis) portable systems based on neutron sources for field work, as well as laboratory based techniques such as PIXE (Proton Induced X-ray Emission) and INAA (Instrumental Neutron Activation Analysis) have been applied non-destructively to investigate the provenience of archaeological objects and to determine different layers of precious paintings. The results of the CRP will be provided to member states for preservation of national heritage and secure legal enforcement. In the frame of the co-ordinated research project it was foreseen to conduct a proficiency test on the determination of major, minor and trace elements in an

  15. Calibration and check light source

    Energy Technology Data Exchange (ETDEWEB)

    Nejedla, B; Krotil, J

    1979-02-15

    The light source is designed for calibrating photomultipliers and checking the function of the thermoluminescent dosemeters evaluation equipment. The check light source consists of a polymer material-based (polyvinyl toluene) plastic scintillator and a 2-phenyl-5-(4-bisphenyl)-1,3,4-oxadiazol and/or paraterphenyl activator, and of emission spectrum shifters for response in the green and the blue light regions. The plastic scintillator is sealed in a case to whose bottom a radiation source is fixed, such as a /sup 90/Sr-/sup 90/Y source of an activity of 1.85x10/sup 3/s/sup -1/ to 0.74x10/sup 9/s/sup -1/.

  16. From Preventive to Permissive Checks

    DEFF Research Database (Denmark)

    Sharp, Paul Richard; Weisdorf, Jacob Louis

    The Malthusian "preventive check" mechanism has been well documented for pre-industrial England through evidence for a negativcorrelation between the marriage rate and the price of wheat. Other literature, however, speculates that the correlation was in fact positive from the early nineteenth cen...... shows that this result is not in fact inconsistent with a stylized Malthusian mechanism, and can be understood within the context of an increasing dominance of shocks to aggregate demand rather than to aggregate supply...

  17. From preventive to permissive checks

    DEFF Research Database (Denmark)

    Weisdorf, Jacob Louis; Sharp, Paul Richard

    2009-01-01

    The Malthusian "preventive check" mechanism has been well documented for pre-industrial England through evidence for a negative correlation between the marriage rate and the price of wheat. Other literature, however, speculates that the correlation was in fact positive from the early nineteenth c...... model shows that this result is not in fact inconsistent with a stylised Malthusian mechanism, and can be understood within the context of an increasing dominance of shocks to aggregate demand rather than to aggregate supply....

  18. Evaluation of Mycology Laboratory Proficiency Testing

    OpenAIRE

    Reilly, Andrew A.; Salkin, Ira F.; McGinnis, Michael R.; Gromadzki, Sally; Pasarell, Lester; Kemna, Maggi; Higgins, Nancy; Salfinger, Max

    1999-01-01

    Changes over the last decade in overt proficiency testing (OPT) regulations have been ostensibly directed at improving laboratory performance on patient samples. However, the overt (unblinded) format of the tests and regulatory penalties associated with incorrect values allow and encourage laboratorians to take extra precautions with OPT analytes. As a result OPT may measure optimal laboratory performance instead of the intended target of typical performance attained during routine patient te...

  19. Independent checks of linear accelerators equipped with multileaf collimators

    International Nuclear Information System (INIS)

    Pavlikova, I.; Ekendahl, D.; Horakova, I.

    2005-01-01

    National Radiation Protection Institute (NRPI) provides independent checks of therapeutic equipment as a part of state supervision. In the end of 2003, the audit was broaden for linear accelerators equipped with multileaf collimators (MLC). NRPI provides TLD postal audits and on-site independent checks. This contribution describes tests for multileaf collimators and intensity modulated radiation therapy (IMRT) technique that are accomplished within the independent on-site check of linear accelerators. The character and type of tests that are necessary to pursue for multileaf collimator depends on application technique. There are three basic application of the MLC. The first we call 'static MLC' and it serves for replacing conventional blocking or for adjusting the field shape to match the beam's-eye view projection of a planning target volume during an arc rotation of the x-ray beam. This procedure is called conformal radiotherapy. The most advanced technique with MLC is intensity modulated radiation therapy. The dose can be delivered to the patient with IMRT in various different ways: dynamic MLC, segmented MLC and IMRT arc therapy. Independent audits represent an important instrument of quality assurance. Methodology for independent check of static MLC was successfully verified on two types of accelerators: Varian and Elekta. Results from pilot measurements with dynamic MLC imply that the methodology is applicable for Varian accelerators. In the future, the experience with other types of linear accelerators will contribute to renovation, modification, and broaden independent checks methodology. (authors)

  20. The Effects of Check-In, Check-Up, Check-Out for Students with Moderate Intellectual Disability during On- and Off-Site Vocational Training

    Science.gov (United States)

    Boden, Lauren J.; Jolivette, Kristine; Alberto, Paul A.

    2018-01-01

    Check-in/check-out is a secondary-tier intervention within the positive behavior interventions and supports framework. Check-in/check-out pairs the use of an adult mentor with a daily progress report to help students meet individualized behavioral goals. This study adds to the research base by examining the effects of check-in, check-up, check-out…

  1. Proficiency and sentence constraint effects on second language word learning.

    Science.gov (United States)

    Ma, Tengfei; Chen, Baoguo; Lu, Chunming; Dunlap, Susan

    2015-07-01

    This paper presents an experiment that investigated the effects of L2 proficiency and sentence constraint on semantic processing of unknown L2 words (pseudowords). All participants were Chinese native speakers who learned English as a second language. In the experiment, we used a whole sentence presentation paradigm with a delayed semantic relatedness judgment task. Both higher and lower-proficiency L2 learners could make use of the high-constraint sentence context to judge the meaning of novel pseudowords, and higher-proficiency L2 learners outperformed lower-proficiency L2 learners in all conditions. These results demonstrate that both L2 proficiency and sentence constraint affect subsequent word learning among second language learners. We extended L2 word learning into a sentence context, replicated the sentence constraint effects previously found among native speakers, and found proficiency effects in L2 word learning. Copyright © 2015 Elsevier B.V. All rights reserved.

  2. Interfacing to accelerator instrumentation

    International Nuclear Information System (INIS)

    Shea, T.J.

    1995-01-01

    As the sensory system for an accelerator, the beam instrumentation provides a tremendous amount of diagnostic information. Access to this information can vary from periodic spot checks by operators to high bandwidth data acquisition during studies. In this paper, example applications will illustrate the requirements on interfaces between the control system and the instrumentation hardware. A survey of the major accelerator facilities will identify the most popular interface standards. The impact of developments such as isochronous protocols and embedded digital signal processing will also be discussed

  3. 25 CFR 11.421 - Bad checks.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Bad checks. 11.421 Section 11.421 Indians BUREAU OF... Criminal Offenses § 11.421 Bad checks. (a) A person who issues or passes a check or similar sight order for..., and the issuer failed to make good within 10 days after receiving notice of that refusal. ...

  4. Model Checking Structured Infinite Markov Chains

    NARCIS (Netherlands)

    Remke, Anne Katharina Ingrid

    2008-01-01

    In the past probabilistic model checking hast mostly been restricted to finite state models. This thesis explores the possibilities of model checking with continuous stochastic logic (CSL) on infinite-state Markov chains. We present an in-depth treatment of model checking algorithms for two special

  5. What Is Lexical Proficiency? Some Answers from Computational Models of Speech Data

    Science.gov (United States)

    Crossley, Scott A.; Salsbury, Tom; McNamara, Danielle S.; Jarvis, Scott

    2011-01-01

    Lexical proficiency, as a cognitive construct, is poorly understood. However, lexical proficiency is an important element of language proficiency and fluency, especially for second language (L2) learners. Lexical proficiency is also an important attribute of L2 academic achievement. Generally speaking, lexical proficiency comprises breadth of…

  6. Differences in Less Proficient and More Proficient ESL College Writing in the Philippine Setting

    Science.gov (United States)

    Gustilo, Leah E.

    2016-01-01

    The present study aimed at characterizing what skilled or more proficient ESL college writing is in the Philippine setting through a contrastive analysis of three groups of variables identified from previous studies: resources, processes, and performance of ESL writers. Based on Chenoweth and Hayes' (2001; 2003) framework, the resource level…

  7. Developing English Writing Proficiency in Limited English Proficient College Students through Cooperative Learning Strategies.

    Science.gov (United States)

    Gooden-Jones, Epsey M.; Carrasquillo, Angela L.

    A study followed ten limited-English-proficient (LEP) community college students who were taught English largely using a cooperative learning approach. For four months, the students worked together using brainstorming techniques and collaborative reading and writing tasks. Task emphasis was on development of thinking skills through collaboration…

  8. Model Checking as Static Analysis

    DEFF Research Database (Denmark)

    Zhang, Fuyuan

    fairness problems can be encoded into ALFP as well. To deal with multi-valued model checking problems, we have proposed multivalued ALFP. A Moore Family result for multi-valued ALFP is also established, which ensures the existence and uniqueness of the least model. When the truth values in multi-valued...... of states satisfying a CTL formula can be characterized as the least model of ALFP clauses specifying this CTL formula. The existence of the least model of ALFP clauses is ensured by the Moore Family property of ALFP. Then, we take fairness assumptions in CTL into consideration and have shown that CTL...... ALFP constitute a nite distributive complete lattice, multi-valued ALFP can be reduced to two-valued ALFP. This result enables to implement a solver for multi-valued ALFP by reusing existing solvers for twovalued ALFP. Our ALFP-based technique developed for the two-valued CTL naturally generalizes...

  9. Worldwide open proficiency test IAEA-CU-2007-09/A: Determination of Po-210 in water

    International Nuclear Information System (INIS)

    2009-01-01

    The IAEA helps the Member States' laboratories to maintain their readiness by coordination activities, by development of standardized methods for sample collection and analysis, and by conducting interlaboratory comparisons and proficiency tests as a tool for external quality control. The Chemistry Unit of the Physics, Chemistry and Instrumentation Laboratory in the International Atomic Energy Agency's Seibersdorf Laboratories in Austria, has the programmatic responsibility to support global radionuclide measurement systems. To fulfil this obligation and ensure a reliable worldwide, rapid and consistent response, the Chemistry Unit organises interlaboratory studies and proficiency tests. The Po-210 poisoning event which occurred in November 2006 brought into focus a number of issues, including the capacity of laboratories to rapidly and accurately determine this radionuclide in environmental samples. A number of requests were received from Member States to address this issue. Responding to these requests, the Chemistry Unit of the Physics, Chemistry and Instrumentation Laboratory in the Agency's Laboratories, conducted a world wide proficiency test on the determination of Po-210 in water. The aim was to gather information on the current state of practice for Po-210 measurements at various levels in aqueous samples. This report describes the methodology employed and the results obtained in this proficiency test

  10. 14 CFR 121.411 - Qualifications: Check airmen (airplane) and check airmen (simulator).

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Qualifications: Check airmen (airplane) and... § 121.411 Qualifications: Check airmen (airplane) and check airmen (simulator). (a) For the purposes of this section and § 121.413: (1) A check airman (airplane) is a person who is qualified, and permitted...

  11. Evaluation of Mycology Laboratory Proficiency Testing

    Science.gov (United States)

    Reilly, Andrew A.; Salkin, Ira F.; McGinnis, Michael R.; Gromadzki, Sally; Pasarell, Lester; Kemna, Maggi; Higgins, Nancy; Salfinger, Max

    1999-01-01

    Changes over the last decade in overt proficiency testing (OPT) regulations have been ostensibly directed at improving laboratory performance on patient samples. However, the overt (unblinded) format of the tests and regulatory penalties associated with incorrect values allow and encourage laboratorians to take extra precautions with OPT analytes. As a result OPT may measure optimal laboratory performance instead of the intended target of typical performance attained during routine patient testing. This study addresses this issue by evaluating medical mycology OPT and comparing its fungal specimen identification error rates to those obtained in a covert (blinded) proficiency testing (CPT) program. Identifications from 188 laboratories participating in the New York State mycology OPT from 1982 to 1994 were compared with the identifications of the same fungi recovered from patient specimens in 1989 and 1994 as part of the routine procedures of 88 of these laboratories. The consistency in the identification of OPT specimens was sufficient to make accurate predictions of OPT error rates. However, while the error rates in OPT and CPT were similar for Candida albicans, significantly higher error rates were found in CPT for Candida tropicalis, Candida glabrata, and other common pathogenic fungi. These differences may, in part, be due to OPT’s use of ideal organism representatives cultured under optimum growth conditions. This difference, as well as the organism-dependent error rate differences, reflects the limitations of OPT as a means of assessing the quality of routine laboratory performance in medical mycology. PMID:10364601

  12. Proficiency test in the accreditation system

    International Nuclear Information System (INIS)

    Legarda, F.; Herranz, M.; Idoeta, R.

    2008-01-01

    In the accreditation process of a radioactivity measurements laboratory, according to ISO standard 17025, proficiency tests play a fundamental role. These PTs constitute an irreplaceable tool for the validation of measuring methods. In the case of Spain, ENAC, which is the Spanish accreditation national body, requires that the laboratory has to take part in a PT for each one of the accredited measuring methods in the period of time between two reassessments of the accreditation, what happens every 4-5 years. In specific areas of determination procedures, among which radioactive measurements could be included, the number of methods which can be accredited is very large. The purpose of the present work is to establish a classification into families of the different radioactivity measurement procedures, as well as to establish complementary actions that guarantee that carrying out periodically proficiency-tests on any of the included procedures in each family, every measurement procedure include in that family is controlled, complying with the criteria established by ENAC

  13. 76 FR 81958 - Notice of Submission of Proposed Information Collection to OMB; Limited English Proficiency...

    Science.gov (United States)

    2011-12-29

    ... Proposed Information Collection to OMB; Limited English Proficiency Initiative (LEPI) Program AGENCY... that support the assistance of persons with limited English proficiency in utilizing the services...: Limited English Proficiency Initiative (LEPI) Program. OMB Approval Number: 2529-0051. Form Numbers...

  14. Teaching English through English: Proficiency, Pedagogy and Performance

    Science.gov (United States)

    Richards, Jack C.

    2017-01-01

    Most of the world's English language teachers speak English as a second or third language rather than as their first language. For many, their level of proficiency in English may not reach benchmarks established by their employers, raising the issue that is the focus of this article, namely, what kind of proficiency in English is necessary to be…

  15. The Nevada Proficiency Examination Program: Evaluating the Writing Samples.

    Science.gov (United States)

    Howard, Edward H.

    Writing tests are part of the mandated statewide proficiency examination in Nevada. The ninth-grade screening test and the eleventh-grade diploma-certifying test require that a student write a paragraph and a business letter, each on an assigned topic and each at an acceptable level of proficiency. Pilot tests, extended discussion, and statistical…

  16. Reconnecting Proficiency, Literacy, and Culture: From Theory to Practice

    Science.gov (United States)

    Warford, Mark K.; White, William L.

    2012-01-01

    What does it mean to capably communicate across languages? This article introduces two theoretical models and a lesson plan format designed to facilitate the integration of proficiency, literacy, and culture teaching in foreign language teaching. The Second Symbolic Competencies Model configures proficiency and literacy as subordinate clusters of…

  17. 5 CFR 9901.364 - Foreign language proficiency pay.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Foreign language proficiency pay. 9901... NATIONAL SECURITY PERSONNEL SYSTEM (NSPS) Pay and Pay Administration Premium Pay § 9901.364 Foreign language proficiency pay. (a) General provisions. (1) This section applies to employees who may be paid...

  18. English Proficiency and Participation in Online Discussion for Learning

    Science.gov (United States)

    Leung, Steve

    2013-01-01

    Does English proficiency affect participation in online discussion? This study polled 14 students from a postgraduate online course that require online discussion. The students are divided into groups according to their home language spoken and self-assessed English proficiency, and measure against their participation level in the required…

  19. Proficiency test for tropane alkaloids in food en feed

    NARCIS (Netherlands)

    Pereboom-de Fauw, D.P.K.H.; Elbers, I.J.W.; Mulder, P.P.J.; Nijs, de W.C.M.

    2014-01-01

    Proficiency testing is conducted to provide laboratories with a powerful tool to evaluate and demonstrate the reliability of the data that are produced. Next to validation and accreditation, proficiency testing is an important requirement of the EU Additional Measures Directive 93/99/EEC [1] and is

  20. The correlation between motor proficiency and physical activity in ...

    African Journals Online (AJOL)

    Background: One of the risks associated with low physical activity levels is the insufficient development of motor proficiency, which in turn has an impact on participation in physical activity and sport during adolescence. Objectives: To determine the relationship between motor proficiency and physical activity levels in ...

  1. Proficiency test for heavy metals in compound feed

    NARCIS (Netherlands)

    Pereboom, D.P.K.H.; Elbers, I.J.W.; Jong, de J.; Lee, van der M.K.; Nijs, de W.C.M.

    2016-01-01

    The here described proficiency test for heavy metals in compound feed was organised by RIKILT, Wageningen UR in accordance with ISO 17043. RIKILT Wageningen UR has an ISO/IEC 17043 accreditation for proficiency tests of residues in products of animal origin. However, this specific test is not part

  2. The Rating of Direct and Semi-Direct Oral Proficiency Interviews: Comparing Performance at Lower Proficiency Levels.

    Science.gov (United States)

    Kenyon, Dorry M.; Tschirner, Erwin

    2000-01-01

    Reports on a study comparing student performances and test reliabilities for the German Speaking Test, a semi-direct tape-mediated oral proficiency test (GST) developed by the Center for Applied Linguistics, and the American Council on the Teaching of Foreign Languages Oral Proficiency Interviews. (Author/VWL)

  3. Aethalometer™ Instrument Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Sedlacek, Arthur J. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2016-04-01

    The Aethalometer is an instrument that provides a real-time readout of the concentration of “Black” or “Elemental” carbon aerosol particles (BC or E) in an air stream (see Figure 1 and Figure 2). It is a self-contained instrument that measures the rate of change of optical transmission through a spot on a filter where aerosol is being continuously collected and uses the information to calculate the concentration of optically absorbing material in the sampled air stream. The instrument measures the transmitted light intensities through the “sensing” portion of the filter, on which the aerosol spot is being collected, and a “reference” portion of the filter as a check on the stability of the optical source. A mass flowmeter monitors the sample air flow rate. The data from these three measurements is used to determine the mean BC content of the air stream.

  4. Measuring Oral Proficiency in Distance, Face-to-Face, and Blended Classrooms

    Directory of Open Access Journals (Sweden)

    Robert Blake

    2008-10-01

    Full Text Available Although the foreign-language profession routinely stresses the importance of technology for the curriculum, many teachers still harbor deep-seated doubts as to whether or not a hybrid course, much less a completely distance-learning class, could provide L2 learners with a way to reach linguistic proficiency, especially with respect to oral language skills. In this study, we examine the case of Spanish Without Walls (SWW, a first-year language course offered at the University of California - Davis in both hybrid and distance-learning formats. The SWW curriculum includes materials delivered via CD-ROM/DVD programs, online content-based web pages, and synchronous bimodal chat that includes sound and text. The contribution of each of these components is evaluated in the context of a successful technologically assisted course. To address the issue of oral proficiency, we compare the results from both classroom and distance-learning students who took the 20-minute Versant for Spanish test, delivered by phone and automatically graded. The data generated by this instrument shows that classroom, hybrid, and distance L2 learners reach comparable levels of oral proficiency during their first year of study. Reference is also made to two other ongoing efforts to provide distance-learning courses in Arabic and Punjabi, two languages where special difficulties in their writing systems have an impact on the design of the distant-learning format. The rationale for offering language courses in either a hybrid or distance-learning format is examined in light of increasing societal pressures to help L2 learners reach advanced proficiency, especially in less commonly taught languages (LCTLs.

  5. Proficiency-based cervical cancer brachytherapy training.

    Science.gov (United States)

    Zhao, Sherry; Francis, Louise; Todor, Dorin; Fields, Emma C

    2018-04-25

    Although brachytherapy increases the local control rate for cervical cancer, there has been a progressive decline in its use. Furthermore, the training among residency programs for gynecologic brachytherapy varies considerably, with some residents receiving little to no training. This trend is especially concerning given the association between poor applicator placement and decline in local control. Considering the success of proficiency-based training in other procedural specialties, we developed and implemented a proficiency-based cervical brachytherapy training curriculum for our residents. Each resident placed tandem and ovoid applicators with attending guidance and again alone 2 weeks later using a pelvic model that was modified to allow for cervical brachytherapy. Plain films were taken of the pelvic model, and applicator placement quality was evaluated. Other evaluated metrics included retention of key procedural details, the time taken for each procedure and presession and postsession surveys to assess confidence. During the initial session, residents on average met 4.5 of 5 placement criteria, which improved to 5 the second session. On average, residents were able to remember 7.6 of the 8 key procedural steps. Execution time decreased by an average of 10.5%. Resident confidence with the procedure improved dramatically, from 2.6 to 4.6 of 5. Residents who had previously never performed a tandem and ovoid procedure showed greater improvements in these criteria than those who had. All residents strongly agreed that the training was helpful and wanted to participate again the following year. Residents participating in this simulation training had measurable improvements in the time to perform the procedure, applicator placement quality, and confidence. This curriculum is easy to implement and is of great value for training residents, and would be particularly beneficial in programs with low volume of cervical brachytherapy cases. Simulation programs could

  6. Radioisotope instruments

    CERN Document Server

    Cameron, J F; Silverleaf, D J

    1971-01-01

    International Series of Monographs in Nuclear Energy, Volume 107: Radioisotope Instruments, Part 1 focuses on the design and applications of instruments based on the radiation released by radioactive substances. The book first offers information on the physical basis of radioisotope instruments; technical and economic advantages of radioisotope instruments; and radiation hazard. The manuscript then discusses commercial radioisotope instruments, including radiation sources and detectors, computing and control units, and measuring heads. The text describes the applications of radioisotop

  7. 46 CFR 10.214 - Security Check.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Security Check. 10.214 Section 10.214 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY MERCHANT MARINE OFFICERS AND SEAMEN MERCHANT MARINER CREDENTIAL General Requirements for All Merchant Mariner Credentials § 10.214 Security Check. Until April 15, 2009...

  8. 7 CFR 1421.11 - Spot checks.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Spot checks. 1421.11 Section 1421.11 Agriculture... ASSISTANCE LOANS AND LOAN DEFICIENCY PAYMENTS FOR 2008 THROUGH 2012 General § 1421.11 Spot checks. (a) CCC... CCC access to the farm and storage facility as necessary to conduct collateral inspections, or “spot...

  9. SPEED ROLLER STAND MEASUREMENT SYSTEM CHECKING TECHNIQUE

    Directory of Open Access Journals (Sweden)

    Y. Zybtsev

    2011-01-01

    Full Text Available The study has shown that the accuracy of brakes checking by inertial stands depends upon the applied methods of measurement of braking parameters (stand slowing down, braking distance, brakes triggering time, current speed as well as the methods of metrological checking of measuring system canals.

  10. Model-Checking Discrete Duration Calculus

    DEFF Research Database (Denmark)

    Hansen, Michael Reichhardt

    1994-01-01

    can do model-checking. The subset we consider is expressive enough to formalize the requirements to the gas burner system given by A.P. Ravn (1993); but only for a discrete time domain. Model-checking is done by reducing the correctness problem ℳ|=𝒟 to the inclusion problem of regular...

  11. Checking and Balancing: Banking and Budgeting.

    Science.gov (United States)

    Thypin, Marilyn; Glasner, Lynne

    A short fictional work for limited English speakers is presented that relates a young couple's experience in learning about managing their money more carefully by budgeting and maintaining a checking account. Since the couple did not have a checking account, they had to go to their savings bank in order to pay each bill and they had to keep cash…

  12. Software tool for physics chart checks.

    Science.gov (United States)

    Li, H Harold; Wu, Yu; Yang, Deshan; Mutic, Sasa

    2014-01-01

    Physics chart check has long been a central quality assurance (QC) measure in radiation oncology. The purpose of this work is to describe a software tool that aims to accomplish simplification, standardization, automation, and forced functions in the process. Nationally recognized guidelines, including American College of Radiology and American Society for Radiation Oncology guidelines and technical standards, and the American Association of Physicists in Medicine Task Group reports were identified, studied, and summarized. Meanwhile, the reported events related to physics chart check service were analyzed using an event reporting and learning system. A number of shortfalls in the chart check process were identified. To address these problems, a software tool was designed and developed under Microsoft. Net in C# to hardwire as many components as possible at each stage of the process. The software consists of the following 4 independent modules: (1) chart check management; (2) pretreatment and during treatment chart check assistant; (3) posttreatment chart check assistant; and (4) quarterly peer-review management. The users were a large group of physicists in the author's radiation oncology clinic. During over 1 year of use the tool has proven very helpful in chart checking management, communication, documentation, and maintaining consistency. The software tool presented in this work aims to assist physicists at each stage of the physics chart check process. The software tool is potentially useful for any radiation oncology clinics that are either in the process of pursuing or maintaining the American College of Radiology accreditation.

  13. Repeated checking induces uncertainty about future threat

    NARCIS (Netherlands)

    Giele, C.L.|info:eu-repo/dai/nl/318754460; Engelhard, I.M.|info:eu-repo/dai/nl/239681533; van den Hout, M.A.|info:eu-repo/dai/nl/070445354; Dek, E.C.P.|info:eu-repo/dai/nl/313959552; Damstra, Marianne; Douma, Ellen

    2015-01-01

    Studies have shown that obsessive-compulsive (OC) -like repeated checking paradoxically increases memory uncertainty. This study tested if checking also induces uncertainty about future threat by impairing the distinction between danger and safety cues. Participants (n = 54) engaged in a simulated

  14. Diagnostic information in temporal compliance checking

    NARCIS (Netherlands)

    Ramezani Taghiabadi, E.; Fahland, D.; Dongen, van B.F.; Aalst, van der W.M.P.

    2012-01-01

    Compliance checking is gaining importance as today’s organizations need to show that operational processes are executed in a controlled manner while satisfying prede¿ned (legal) requirements. Deviations may be costly and expose the organization to severe risks. Compliance checking is of growing

  15. Automatization and familiarity in repeated checking

    NARCIS (Netherlands)

    Dek, E.C.P.|info:eu-repo/dai/nl/313959552; van den Hout, M.A.|info:eu-repo/dai/nl/070445354; Giele, C.L.|info:eu-repo/dai/nl/318754460; Engelhard, I.M.|info:eu-repo/dai/nl/239681533

    2015-01-01

    Repetitive, compulsive-like checking of an object leads to reductions in memory confidence, vividness, and detail. Experimental research suggests that this is caused by increased familiarity with perceptual characteristics of the stimulus and automatization of the checking procedure (Dek, van den

  16. Model Checking Infinite-State Markov Chains

    NARCIS (Netherlands)

    Remke, Anne Katharina Ingrid; Haverkort, Boudewijn R.H.M.; Cloth, L.

    2004-01-01

    In this paper algorithms for model checking CSL (continuous stochastic logic) against infinite-state continuous-time Markov chains of so-called quasi birth-death type are developed. In doing so we extend the applicability of CSL model checking beyond the recently proposed case for finite-state

  17. Model Checking Real-Time Systems

    DEFF Research Database (Denmark)

    Bouyer, Patricia; Fahrenberg, Uli; Larsen, Kim Guldstrand

    2018-01-01

    This chapter surveys timed automata as a formalism for model checking real-time systems. We begin with introducing the model, as an extension of finite-state automata with real-valued variables for measuring time. We then present the main model-checking results in this framework, and give a hint...

  18. 32 CFR 635.6 - Name checks.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 4 2010-07-01 2010-07-01 true Name checks. 635.6 Section 635.6 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) LAW ENFORCEMENT AND CRIMINAL INVESTIGATIONS LAW ENFORCEMENT REPORTING Records Administration § 635.6 Name checks. (a) Information contained in military police records may be...

  19. 7 CFR 58.243 - Checking quality.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Checking quality. 58.243 Section 58.243 Agriculture... Procedures § 58.243 Checking quality. All milk, milk products and dry milk products shall be subject to inspection and analysis by the dairy plant for quality and condition throughout each processing operation...

  20. Vertical pump with free floating check valve

    International Nuclear Information System (INIS)

    Lindsay, M.

    1980-01-01

    A vertical pump is described which has a bottom discharge with a free floating check valve disposed in the outlet plenum thereof. The free floating check valve comprises a spherical member with a hemispherical cage-like member attached thereto which is capable of allowing forward or reverse flow under appropriate conditions while preventing reverse flow under inappropriate conditions

  1. 38 CFR 21.4505 - Check delivery.

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Check delivery. 21.4505...) VOCATIONAL REHABILITATION AND EDUCATION Education Loans § 21.4505 Check delivery. (a) General. Education... surviving spouse is enrolled for delivery by the educational institution. (b) Delivery and certification. (1...

  2. An automatic drawing system for a report radioactive contamination check

    International Nuclear Information System (INIS)

    Saneyoshi, Keiji; Tomita, Satoru; Yoda, Isao

    2002-01-01

    An Automatic drawing system for a report of surface contamination check in a radiation controlled area has been developed. The system can print out the report applied for the format provided by the law from the raw data that is the output from measuring instruments. The task of a worker is only to insert an FD storing the data into a PC and to push a button. The system also yields contamination maps to indicate contamination points clearly. With this system the time to complete the report from the raw data could be decreased from more than two hours to 4 minutes. (author)

  3. What is a good health check? An interview study of health check providers' views and practices

    NARCIS (Netherlands)

    Y. Stol (Yrrah); E.C.A. Asscher (Eva); M.H.N. Schermer (Maartje)

    2017-01-01

    markdownabstract__Background:__ Health checks identify (risk factors for) disease in people without symptoms. They may be offered by the government through population screenings and by other providers to individual users as 'personal health checks'. Health check providers' perspective of 'good'

  4. 14 CFR 91.1089 - Qualifications: Check pilots (aircraft) and check pilots (simulator).

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Qualifications: Check pilots (aircraft) and check pilots (simulator). 91.1089 Section 91.1089 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... RULES Fractional Ownership Operations Program Management § 91.1089 Qualifications: Check pilots...

  5. [Airport security check of medical substances used during patient repatriation].

    Science.gov (United States)

    Felkai, Péter

    2012-09-16

    During airport security check of passenger luggage, hazardous items and substances are prohibited to be taken into the restricted safety zone of the airport and the aircraft. Among equipment of the medical staff escorting the patient, there are several devices and materials which are considered hazardous for security reasons. However, medical equipment and substances are indispensable for treating patients during the flight. The aim of the author was to present his experience obtained with the use of an instrument developed for testing liquids, aerosols and gels for security reasons. An instrument based on Raman spectroscopy was used for the identification of medical substances. The results confirmed that the instrument was able to recognize the tested medical substances. The non-destructive testing maintained sample integrity and asepsis. The data indicate that the instrument has a promising utility for the identification of medical substances. It seems important that during repatriation medical substances should be selected not only on the ground of their medical necessity, but their packaging should be also taken into consideration. It is necessary to perform more tests on different medical substances used in emergency care in order to make the database of medical substances stored in the library of instrument more complete.

  6. Bringing LTL Model Checking to Biologists

    OpenAIRE

    Ahmed, Z; Benque, D; Berezin, S; Dahl, ACE; Fisher, Jasmin; Hall, Benjamin Andrew; Ishtiaq, S; Nanavati, J; Piterman, N; Riechert, M; Skoblov, N

    2017-01-01

    The BioModelAnalyzer (BMA) is a web based tool for the development of discrete models of biological systems. Through a graphical user interface, it allows rapid development of complex models of gene and protein interaction networks and stability analysis without requiring users to be proficient computer programmers. Whilst stability is a useful specification for testing many systems, testing temporal specifications in BMA presently requires the user to perform simulations. Here we describe th...

  7. THE BANGLADESHI EMPLOYMENT SECTOR: EMPLOYER PERSPECTIVES CONCERNING ENGLISH PROFICIENCY

    Directory of Open Access Journals (Sweden)

    Rubina Khan

    2012-07-01

    Full Text Available Abstract: This paper presents a brief summary of a study which was carried out to investigate how employers representing major employment sectors in the Bangladeshi Industry view the skills and English proficiency level of the current employees. Opinions were also solicited on what skills are required for fresh recruits. Semi-structured interviews were conducted with 30 employers representing the major employment sectors in Bangladeshi Industry. Results revealed the importance of English as an indispensible means of communication in the Bangladeshi corporate sector and showed that the business enterprises use extensive amounts of English. It also highlighted that the existent English proficiency of the employees was far below the required proficiency level. Recommendations were made to address the gap and prepare the youth to meet the demands of the global market. Keywords: English proficiency, competency, employability skills, global literacy skills

  8. PROFICIENT CLASSROOM MANAGEMENT THROUGH FOCUSED MATHEMATIC TEACHING

    Directory of Open Access Journals (Sweden)

    Marcus Samuelsson

    2017-12-01

    Full Text Available A not entirely unusual position among teachers is that they believe that they must first establish a peaceful classroom before they can begin to teach the subject. This research, shows how a proficient mathematics teacher teaches his subject and thereby creates a quiet and focused classroom and exerts effective leadership, just by teaching mathematics. The researchers observed a male mathematics teacher for almost half a year, i.e. one semester. The results of research present several patterns that the researchers saw during the observations of his teaching. The teacher showed an interest in each student’s mathematical thinking and expressed explicitly how students were expected to learn mathematics. He also directed students’ attention to mathematics and established a culture where all solutions were important in the teaching process. In the teaching process, he used multiple representations to motivate students and a lot of supportive expressions that made them feel that they were able to learn mathematics. He worked patiently to establish structures, and there was almost no disruptive behaviour. Students simply did not have time to interfere because they were so engaged in learning mathematics.

  9. Simple Check Valves for Microfluidic Devices

    Science.gov (United States)

    Willis, Peter A.; Greer, Harold F.; Smith, J. Anthony

    2010-01-01

    A simple design concept for check valves has been adopted for microfluidic devices that consist mostly of (1) deformable fluorocarbon polymer membranes sandwiched between (2) borosilicate float glass wafers into which channels, valve seats, and holes have been etched. The first microfluidic devices in which these check valves are intended to be used are micro-capillary electrophoresis (microCE) devices undergoing development for use on Mars in detecting compounds indicative of life. In this application, it will be necessary to store some liquid samples in reservoirs in the devices for subsequent laboratory analysis, and check valves are needed to prevent cross-contamination of the samples. The simple check-valve design concept is also applicable to other microfluidic devices and to fluidic devices in general. These check valves are simplified microscopic versions of conventional rubber- flap check valves that are parts of numerous industrial and consumer products. These check valves are fabricated, not as separate components, but as integral parts of microfluidic devices. A check valve according to this concept consists of suitably shaped portions of a deformable membrane and the two glass wafers between which the membrane is sandwiched (see figure). The valve flap is formed by making an approximately semicircular cut in the membrane. The flap is centered over a hole in the lower glass wafer, through which hole the liquid in question is intended to flow upward into a wider hole, channel, or reservoir in the upper glass wafer. The radius of the cut exceeds the radius of the hole by an amount large enough to prevent settling of the flap into the hole. As in a conventional rubber-flap check valve, back pressure in the liquid pushes the flap against the valve seat (in this case, the valve seat is the adjacent surface of the lower glass wafer), thereby forming a seal that prevents backflow.

  10. Trainee-Associated Factors and Proficiency at Percutaneous Nephrolithotomy

    Directory of Open Access Journals (Sweden)

    Seyed Mohammad Kazem Aghamir

    2017-09-01

    Full Text Available Percutaneous nephrolithotomy (PNL is a complicated procedure for urology trainees. This study was designed to investigate the effect of trainees’ ages and previous experience, as well as the number of operated cases, on proficiency at PNL by using patient outcomes. A cross sectional observational study was designed during a five-year period. Trainees in PNL fellowship programs were included. At the end of the program, the trainees’ performance in PNL was assessed regarding five competencies and scored 1-5. If the overall score was 4 or above, the trainee was considered as proficient. The trainees’ age at the beginning of the program and the years passed from their residency graduation were asked and recorded. Also, the number of PNL cases operated by each trainee was obtained via their logbooks. The age, years passed from graduation, and number of operated cases were compared between two groups of proficient and non-proficient trainees. Univariate and multivariate binary logistic regression analysis was applied to estimate the effect of aforementioned variables on the occurrence of the proficiency. Forty-two trainees were included in the study. The mean and standard deviation for the overall score were 3.40 (out of 5 and 0.67, respectively. Eleven trainees (26.2% recognized as proficient in performing PNL. Univariate regression analysis indicated that each of three variables (age, years passed from graduation and number of operated cases had statistically significant effect on proficiency. However, the multivariate regression analysis revealed that just the number of cases had significant effect on achieving proficiency. Although it might be assumed that trainees’ age negatively correlates with their scores, in fact, it is their amount of practice that makes a difference. A certain number of cases is required to be operated by a trainee in order to reach the desired competency in PNL.

  11. Trainee-Associated Factors and Proficiency at Percutaneous Nephrolithotomy.

    Science.gov (United States)

    Aghamir, Seyed Mohammad Kazem; Behtash, Negar; Hamidi, Morteza; Farahmand, Hasan; Salavati, Alborz; Mortaz Hejri, Sara

    2017-07-01

    Percutaneous nephrolithotomy (PNL) is a complicated procedure for urology trainees. This study was designed to investigate the effect of trainees' ages and previous experience, as well as the number of operated cases, on proficiency at PNL by using patient outcomes. A cross sectional observational study was designed during a five-year period. Trainees in PNL fellowship programs were included. At the end of the program, the trainees' performance in PNL was assessed regarding five competencies and scored 1-5. If the overall score was 4 or above, the trainee was considered as proficient. The trainees' age at the beginning of the program and the years passed from their residency graduation were asked and recorded. Also, the number of PNL cases operated by each trainee was obtained via their logbooks. The age, years passed from graduation, and number of operated cases were compared between two groups of proficient and non-proficient trainees. Univariate and multivariate binary logistic regression analysis was applied to estimate the effect of aforementioned variables on the occurrence of the proficiency. Forty-two trainees were included in the study. The mean and standard deviation for the overall score were 3.40 (out of 5) and 0.67, respectively. Eleven trainees (26.2%) recognized as proficient in performing PNL. Univariate regression analysis indicated that each of three variables (age, years passed from graduation and number of operated cases) had statistically significant effect on proficiency. However, the multivariate regression analysis revealed that just the number of cases had significant effect on achieving proficiency. Although it might be assumed that trainees' age negatively correlates with their scores, in fact, it is their amount of practice that makes a difference. A certain number of cases is required to be operated by a trainee in order to reach the desired competency in PNL.

  12. Language proficiency and the international postgraduate student experience

    OpenAIRE

    Weaver, M

    2016-01-01

    In an increasingly competitive environment, with reduced government funding, full fee-paying international students are an important source of revenue for higher education institutions (HEIs). Although many previous studies have focused on the role of English language proficiency on academic success, there is little known about the extent to which levels of English language proficiency affect these non-native English speaking students’ overall course experience. There have been a wealth of st...

  13. Instrumental interaction

    OpenAIRE

    Luciani , Annie

    2007-01-01

    International audience; The expression instrumental interaction as been introduced by Claude Cadoz to identify a human-object interaction during which a human manipulates a physical object - an instrument - in order to perform a manual task. Classical examples of instrumental interaction are all the professional manual tasks: playing violin, cutting fabrics by hand, moulding a paste, etc.... Instrumental interaction differs from other types of interaction (called symbolic or iconic interactio...

  14. Using the TOEFL to measure the reading proficiency levels of deaf college applicants.

    Science.gov (United States)

    LoMaglio, L J

    1991-07-01

    The TOEFL is widely used by colleges and universities in the United States and Canada to measure the English language proficiency levels of hearing international applicants. At the National Technical Institute for the Deaf, a faculty committee recommended that this popular test instrument be used to measure the English reading skills of deaf international applicants to the National Technical Institute for the Deaf. This study examined the merits of using the TOEFL to measure the English reading ability of hearing post-secondary international students seeking admission to English-based colleges and universities. Forty-one hearing foreign students were tested in the fall of 1989 at the English Language Institute at SUNY Buffalo. The instruments chosen were both the TOEFL and the California Achievement Test of reading ability. The majority of the research subjects who scored between 400 and 500 on the TOEFL achieved a grade level of less than 8.0 on the California Achievement Test.

  15. QuickChecking Static Analysis Properties

    DEFF Research Database (Denmark)

    Midtgaard, Jan; Møller, Anders

    2015-01-01

    A static analysis can check programs for potential errors. A natural question that arises is therefore: who checks the checker? Researchers have given this question varying attention, ranging from basic testing techniques, informal monotonicity arguments, thorough pen-and-paper soundness proofs...... of a lattice. Moreover, we offer a number of generic, type-safe combinators to check transfer functions and operators on lattices, to help ensure that these are, e.g., monotone, strict, or invariant. We substantiate our claims by quickchecking a type analysis for the Lua programming language...

  16. QuickChecking static analysis properties

    DEFF Research Database (Denmark)

    Midtgaard, Jan; Møller, Anders

    2017-01-01

    A static analysis can check programs for potential errors. A natural question that arises is therefore: who checks the checker? Researchers have given this question varying attention, ranging from basic testing techniques, informal monotonicity arguments, thorough pen-and-paper soundness proofs....... Moreover, we offer a number of generic, type-safe combinators to check transfer functions and operators on lattices, to help ensure that these are, eg, monotone, strict, or invariant. We substantiate our claims by quickchecking a type analysis for the Lua programming language....

  17. Engineering Abstractions in Model Checking and Testing

    DEFF Research Database (Denmark)

    Achenbach, Michael; Ostermann, Klaus

    2009-01-01

    Abstractions are used in model checking to tackle problems like state space explosion or modeling of IO. The application of these abstractions in real software development processes, however, lacks engineering support. This is one reason why model checking is not widely used in practice yet...... and testing is still state of the art in falsification. We show how user-defined abstractions can be integrated into a Java PathFinder setting with tools like AspectJ or Javassist and discuss implications of remaining weaknesses of these tools. We believe that a principled engineering approach to designing...... and implementing abstractions will improve the applicability of model checking in practice....

  18. Incremental Integrity Checking: Limitations and Possibilities

    DEFF Research Database (Denmark)

    Christiansen, Henning; Martinenghi, Davide

    2005-01-01

    Integrity checking is an essential means for the preservation of the intended semantics of a deductive database. Incrementality is the only feasible approach to checking and can be obtained with respect to given update patterns by exploiting query optimization techniques. By reducing the problem...... to query containment, we show that no procedure exists that always returns the best incremental test (aka simplification of integrity constraints), and this according to any reasonable criterion measuring the checking effort. In spite of this theoretical limitation, we develop an effective procedure...

  19. Comparison of multianalyte proficiency test results by sum of ranking differences, principal component analysis, and hierarchical cluster analysis.

    Science.gov (United States)

    Škrbić, Biljana; Héberger, Károly; Durišić-Mladenović, Nataša

    2013-10-01

    Sum of ranking differences (SRD) was applied for comparing multianalyte results obtained by several analytical methods used in one or in different laboratories, i.e., for ranking the overall performances of the methods (or laboratories) in simultaneous determination of the same set of analytes. The data sets for testing of the SRD applicability contained the results reported during one of the proficiency tests (PTs) organized by EU Reference Laboratory for Polycyclic Aromatic Hydrocarbons (EU-RL-PAH). In this way, the SRD was also tested as a discriminant method alternative to existing average performance scores used to compare mutlianalyte PT results. SRD should be used along with the z scores--the most commonly used PT performance statistics. SRD was further developed to handle the same rankings (ties) among laboratories. Two benchmark concentration series were selected as reference: (a) the assigned PAH concentrations (determined precisely beforehand by the EU-RL-PAH) and (b) the averages of all individual PAH concentrations determined by each laboratory. Ranking relative to the assigned values and also to the average (or median) values pointed to the laboratories with the most extreme results, as well as revealed groups of laboratories with similar overall performances. SRD reveals differences between methods or laboratories even if classical test(s) cannot. The ranking was validated using comparison of ranks by random numbers (a randomization test) and using seven folds cross-validation, which highlighted the similarities among the (methods used in) laboratories. Principal component analysis and hierarchical cluster analysis justified the findings based on SRD ranking/grouping. If the PAH-concentrations are row-scaled, (i.e., z scores are analyzed as input for ranking) SRD can still be used for checking the normality of errors. Moreover, cross-validation of SRD on z scores groups the laboratories similarly. The SRD technique is general in nature, i.e., it can

  20. Meeting the requirements of both classroom-based and systemic assessment of mathematics proficiency: The potential of Rasch measurement theory

    Directory of Open Access Journals (Sweden)

    Tim Dunne

    2012-11-01

    Full Text Available The challenges inherent in assessing mathematical proficiency depend on a number of factors, amongst which are an explicit view of what constitutes mathematical proficiency, an understanding of how children learn and the purpose and function of teaching. All of these factors impact on the choice of approach to assessment. In this article we distinguish between two broad types of assessment, classroom-based and systemic assessment. We argue that the process of assessment informed by Rasch measurement theory (RMT can potentially support the demands of both classroom-based and systemic assessment, particularly if a developmental approach to learning is adopted, and an underlying model of developing mathematical proficiency is explicit in the assessment instruments and their supporting material. An example of a mathematics instrument and its analysis which illustrates this approach, is presented. We note that the role of assessment in the 21st century is potentially powerful. This influential role can only be justified if the assessments are of high quality and can be selected to match suitable moments in learning progress and the teaching process. Users of assessment data must have sufficient knowledge and insight to interpret the resulting numbers validly, and have sufficient discernment to make considered educational inferences from the data for teaching and learning responses.

  1. Notification: Purchase Card and Convenience Check Audit

    Science.gov (United States)

    Project #OA-FY13-0116, April 11, 2013. The U.S. Environmental Protection Agency, Office of Inspector General, is beginning the fieldwork phase of its audit of the agency’s purchase card and convenience check programs.

  2. Classification and checking model of pedestrian crossing

    Directory of Open Access Journals (Sweden)

    Luis Delgado Méndez

    2012-11-01

    After realizing this investigation it can be confirmed that the functionality of a pedestrian crossing depends on almost a hundred parameters which must be checked or measured, in turn proving that this design and construction process is indeed complex.

  3. Model checking mobile ad hoc networks

    NARCIS (Netherlands)

    Ghassemi, Fatemeh; Fokkink, Wan

    2016-01-01

    Modeling arbitrary connectivity changes within mobile ad hoc networks (MANETs) makes application of automated formal verification challenging. We use constrained labeled transition systems as a semantic model to represent mobility. To model check MANET protocols with respect to the underlying

  4. CMM Interim Check Design of Experiments (U)

    Energy Technology Data Exchange (ETDEWEB)

    Montano, Joshua Daniel [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-07-29

    Coordinate Measuring Machines (CMM) are widely used in industry, throughout the Nuclear Weapons Complex and at Los Alamos National Laboratory (LANL) to verify part conformance to design definition. Calibration cycles for CMMs at LANL are predominantly one year in length and include a weekly interim check to reduce risk. The CMM interim check makes use of Renishaw’s Machine Checking Gauge which is an off-the-shelf product simulates a large sphere within a CMM’s measurement volume and allows for error estimation. As verification on the interim check process a design of experiments investigation was proposed to test a couple of key factors (location and inspector). The results from the two-factor factorial experiment proved that location influenced results more than the inspector or interaction.

  5. Some emergency instrumentation

    Energy Technology Data Exchange (ETDEWEB)

    Burgess, P H

    1986-10-01

    The widespread release of activity and the resultant spread of contamination after the Chernobyl accident resulted in requests to NRPB to provide instruments for, and expertise in, the measurement of radiation. The most common request was for advice on the usefulness of existing instruments, but Board staff were also involved in their adaptation or in the development of new instruments specially to meet the circumstances of the accident. The accident occurred on 26 April. On 1 May, NRPB was involved at Heathrow Airport in the monitoring of the British students who had returned from Kiev and Minsk. The main purpose was to reassure the students by checking that their persons and belongings did not have significant surface contamination. Additional measurements were also made of iodine activity in thyroid using hand-held detectors or a mobile body monitor. This operation was arranged with the Foreign and Commonwealth Office, which had also received numerous requests for instruments from embassies and consulates in countries close to the scene of the accident. There was concern for the well-being of staff and other United Kingdom nationals who resided in or intended to visit the most affected countries. The board supplied suitable instruments, and the FCO distributed them to embassies. The frequency of environmental monitoring was increased from 29 April in anticipation of contamination and appropriate Board instrumentation was deployed. After the Chernobyl cloud arrived in the UK on 2 May, there were numerous requests from local government, public authorities, private companies and members of the public for information and advice on monitoring equipment and procedures. Some of these requirements could be met with existing equipment but members of the public were usually advised not to proceed. At a later stage, the contamination of foodstuffs and livestock required the development of an instrument capable of detecting low levels of {sup 137}Cs and {sup 134}Cs in food

  6. Commutability of food microbiology proficiency testing samples.

    Science.gov (United States)

    Abdelmassih, M; Polet, M; Goffaux, M-J; Planchon, V; Dierick, K; Mahillon, J

    2014-03-01

    Food microbiology proficiency testing (PT) is a useful tool to assess the analytical performances among laboratories. PT items should be close to routine samples to accurately evaluate the acceptability of the methods. However, most PT providers distribute exclusively artificial samples such as reference materials or irradiated foods. This raises the issue of the suitability of these samples because the equivalence-or 'commutability'-between results obtained on artificial vs. authentic food samples has not been demonstrated. In the clinical field, the use of noncommutable PT samples has led to erroneous evaluation of the performances when different analytical methods were used. This study aimed to provide a first assessment of the commutability of samples distributed in food microbiology PT. REQUASUD and IPH organized 13 food microbiology PTs including 10-28 participants. Three types of PT items were used: genuine food samples, sterile food samples and reference materials. The commutability of the artificial samples (reference material or sterile samples) was assessed by plotting the distribution of the results on natural and artificial PT samples. This comparison highlighted matrix-correlated issues when nonfood matrices, such as reference materials, were used. Artificially inoculated food samples, on the other hand, raised only isolated commutability issues. In the organization of a PT-scheme, authentic or artificially inoculated food samples are necessary to accurately evaluate the analytical performances. Reference materials, used as PT items because of their convenience, may present commutability issues leading to inaccurate penalizing conclusions for methods that would have provided accurate results on food samples. For the first time, the commutability of food microbiology PT samples was investigated. The nature of the samples provided by the organizer turned out to be an important factor because matrix effects can impact on the analytical results. © 2013

  7. WE-E-BRB-10: DosCheck - an Electronic Chart Checking Tool for Dosimetrists.

    Science.gov (United States)

    Yang, D; Wu, Y; Yaddanapudi, S; Moore, K; Pierbuxg, B; Brame, S; Mutic, S

    2012-06-01

    In addition to treatment planning, dosimetrists have to prepare documentation and manually enter data in treatment management system (TMS) which did not transfer or setup automatically. The required documents and data are dependent on the disease site, treatment machine and clinical workflow. Errors and inconsistencies can cause redundant work, treatment delays and potentially treatment errors. To address these issues, an electronic checking software tool, DosCheck was clinically implemented to check the existence of necessary documentations and the integrity of manually-entered data. The purpose of this software is to reduce the frequency of human errors and to improve efficiency. DosCheck reads data and documents from 1) TMS, 2) Pinnacle TPS, and 3) DICOM plan files stored in a DICOM-RT PACS. It processes documents in Word and PDF format, treatment plan data in Pinnacle native format and DICOM format, and Mosaiq data in database records. The software cross-checks data accuracy and consistency by following rules that are pre-defined according to the clinical requirements and treatment sties. It interacts with dosimetrists and presents instantaneous results via graphical user interface. DosCheck has been implemented in C#. It performs a full check for a patient with 20 seconds. It has been clinically commissioned and is used daily by all dosimetrists at our institution. Retrospective analysis shows that DosCheck identifies 30% to 40% of previously reported dosimetrist human errors. Additional ∼30% errors are checked by other tools that could be integrated DosCheck in the near future. As an electronic data checking tool, DosCheck can obtain and process data and documents from multiple clinical computer systems in the radiation oncology department, and perform checks according to clinical rules. It is able to improve the accuracy and efficiency of clinical data and document process, and therefore to reduce any potential inconsistencies and errors. © 2012 American

  8. Use of a novel virus inactivation method for a multicenter avian influenza real-time reverse transcriptase-polymerase chain reaction proficiency study.

    Science.gov (United States)

    Spackman, Erica; Suarez, David L

    2005-01-01

    Proficiency assessments are important elements in quality control for diagnostic laboratories. Traditionally, proficiency testing for polymerase chain reaction (PCR)-based assays has involved the use of clinical samples, samples "spiked" with live agents or DNA plasmids. Because of government regulations and biosecurity concerns, distribution of live high-consequence pathogens of livestock and poultry, such as avian influenza, is not possible, and DNA plasmids are not technically suitable for evaluating RNA virus detection. Therefore, a proficiency testing panel using whole avian influenza in a diluent containing a phenolic disinfectant that inactivates the virus while preserving the RNA for at least 8 weeks at -70 C was developed and used in a multicenter proficiency assessment for a type A influenza real-time reverse transcriptase (RT)-PCR test. The test, which was highly standardized, except for variation in the real-time RT-PCR equipment used, was shown to be highly reproducible by proficiency testing in 12 laboratories in the United States, Canada, and Hong Kong. Variation in cycle threshold values among 35 data sets and 490 samples was minimal (CV = 5.19%), and sample identifications were highly accurate (96.7% correct identifications) regardless of real-time PCR instrumentation.

  9. Verb-Noun Collocation Proficiency and Academic Years

    Directory of Open Access Journals (Sweden)

    Fatemeh Ebrahimi-Bazzaz

    2014-01-01

    Full Text Available Generally vocabulary and collocations in particular have significant roles in language proficiency. A collocation includes two words that are frequently joined concurrently in the memory of native speakers. There have been many linguistic studies trying to define, to describe, and to categorise English collocations. It contains grammatical collocations and lexical collocations which include nouns, adjectives, verbs, and adverb. In the context of a foreign language environment such as Iran, collocational proficiency can be useful because it helps the students improve their language proficiency. This paper investigates the possible relationship between verb-noun collocation proficiency among students from one academic year to the next. To reach this goal, a test of verb-noun collocations was administered to Iranian learners. The participants in the study were 212 Iranian students in an Iranian university. They were selected from the second term of freshman, sophomore, junior, and senior years. The students’ age ranged from 18 to 35.The results of ANOVA showed there was variability in the verb-noun collocations proficiency within each academic year and between the four academic years. The results of a post hoc multiple comparison tests demonstrated that the means are significantly different between the first year and the third and fourth years, and between the third and the fourth academic year; however, students require at least two years to show significant development in verb-noun collocation proficiency. These findings provided a vital implication that lexical collocations are learnt and developed through four academic years of university, but requires at least two years showing significant development in the language proficiency.

  10. English language proficiency and smoking prevalence among California's Asian Americans.

    Science.gov (United States)

    Tang, Hao; Shimizu, Robin; Chen, Moon S

    2005-12-15

    The authors documented California's tobacco control initiatives for Asian Americans and the current tobacco use status among Asian subgroups and provide a discussion of the challenges ahead. The California Tobacco Control Program has employed a comprehensive approach to decrease tobacco use in Asian Americans, including ethnic-specific media campaigns, culturally competent interventions, and technical assistance and training networks. Surveillance of tobacco use among Asian Americans and the interpretation of the results have always been a challenge. Data from the 2001 The California Health Interview Survey (CHIS) were analyzed to provide smoking prevalence estimates for all Asian Americans and Asian-American subgroups, including Korean, Filipino, Japanese, South Asian, Chinese, and Vietnamese. Current smoking prevalence was analyzed by gender and by English proficiency level. Cigarette smoking prevalence among Asian males in general was almost three times of that among Asian females. Korean and Vietnamese males had higher cigarette smoking prevalence rates than males in other subgroups. Although Asian females in general had low smoking prevalence rates, significant differences were found among Asian subgroups, from 1.1% (Vietnamese) to 12.7% (Japanese). Asian men who had high English proficiency were less likely to be smokers than men with lower English proficiency. Asian women with high English proficiency were more likely to be smokers than women with lower English proficiency. Smoking prevalence rates among Asian Americans in California differed significantly on the basis of ethnicity, gender, and English proficiency. English proficiency seemed to have the effect of reducing smoking prevalence rates among Asian males but had just the opposite effect among Asian females. Cancer 2005. (c) 2005 American Cancer Society.

  11. Improvisation: An Essential Element of Musical Proficiency.

    Science.gov (United States)

    Dobbins, Bill

    1980-01-01

    The author discusses the importance of improvisation, suggesting that improvisation be introduced in the earliest stages of education and be taught through an approach that integrates ear training, sight-reading, instrumental and vocal techniques and theory into a unified and complete understanding of music as a language. (Author/KC)

  12. Automatic checking of heavy element content in polymetallic ores directly in transportation containers

    International Nuclear Information System (INIS)

    Varvaritsa, V.P.; Mamikon'yan, S.V.; Nagornyj, V.Ya.

    1981-01-01

    An automatic measuring instrument has been developed and used to check rapidly the content of lead in ores transported by trolley cars, dump trucks, dump cars or other open containers. The measuring technique is based on gamma backscattering and X-ray fluorescence. Influences of container movements, volumetric density changes and matrix effects on the achievable accuracy are briefly discussed

  13. Instrumentation Facility

    Data.gov (United States)

    Federal Laboratory Consortium — Provides instrumentation support for flight tests of prototype weapons systems using a vast array of airborne sensors, transducers, signal conditioning and encoding...

  14. Mismatch repair proficiency is not required for radioenhancement by gemcitabine

    International Nuclear Information System (INIS)

    Bree, Chris van; Rodermond, Hans M.; Vos, Judith de; Haveman, Jaap; Franken, Nicolaas

    2005-01-01

    Purpose: Mismatch repair (MMR) proficiency has been reported to either increase or decrease radioenhancement by 24-h incubations with gemcitabine. This study aimed to establish the importance of MMR for radioenhancement by gemcitabine after short-exposure, high-dose treatment and long-exposure, low-dose treatment. Methods and Materials: Survival of MMR-deficient HCT116 and MMR-proficient HCT116 + 3 cells was analyzed by clonogenic assays. Mild, equitoxic gemcitabine treatments (4 h, 0.1 μM vs. 24 h, 6 nM) were combined with γ-irradiation to determine the radioenhancement with or without recovery. Gemcitabine metabolism and cell-cycle effects were evaluated by high-performance liquid chromatography analysis and bivariate flow cytometry. Results: Radioenhancement after 4 h of 0.1 μM of gemcitabine was similar in both cell lines, but the radioenhancement after 24 h of 6 nM of gemcitabine was reduced in MMR-proficient cells. No significant differences between both cell lines were observed in the gemcitabine metabolism or cell-cycle effects after these treatments. Gemcitabine radioenhancement after recovery was also lower in MMR-proficient cells than in MMR-deficient cells. Conclusion: Mismatch repair proficiency decreases radioenhancement by long incubations of gemcitabine but does not affect radioenhancement by short exposures to a clinically relevant gemcitabine dose. Our data suggest that MMR contributes to the recovery from gemcitabine treatment

  15. The proficiency testing of determination of dioxins in food

    Energy Technology Data Exchange (ETDEWEB)

    Matsuda, R.; Tsutsumi, T.; Maitani, T. [National Institute of Health Sciences, Tokyo (Japan); Toyoda, M. [Jissen Womens Univ., Hino (Japan)

    2004-09-15

    Food intake is the main route of human dioxin exposure, making the determination of dioxins in food indispensable for risk assessment and risk management of dioxins. The uncertainty of analytical results, however, can be very great because of the low concentration of the analytes and complicated cleanup procedures. The risk assessment of dioxins based on analytical results also suffers from a similar degree of uncertainty. The Ministry of Health, Labor and Welfare of Japan has published ''Guideline for the Determination of Dioxins in Food'' to standardize the analytical procedures. The guideline contains the quality assurance procedures to obtain reliable analytical results and recommends participation in the relevant proficiency testing scheme. The proficiency testing provides the fair evaluation of the analytical results. The central science laboratory in England and the food and drug safety center in Japan offer the proficiency testing on food. The National Institute of Health Sciences of Japan (NIHS) also has carried out proficiency testing of dioxins in food since 1998 to assure the quality of analytical results for dioxins. In this presentation we will show the results of 5 rounds of proficiency testing.

  16. Recent improvements in check valve monitoring methods

    International Nuclear Information System (INIS)

    Haynes, H.D.

    1990-01-01

    In support of the NRC Nuclear Plant Aging Research (NPAR) program, ORNL has carried out an evaluation of three check valve monitoring methods: acoustic emission, ultrasonic inspection, and magnetic flux signature analysis (MFSA). This work has focused on determining the capabilities of each method to provide diagnostic information useful in determining check valve aging and service wear effects (degradation) and undesirable operating modes. In addition, as part of the ORNL Advanced Diagnostic Engineering Research and Development Center (ADEC), two noval nonintrusive monitoring methods were developed (external ac- and dc-magnetic monitoring) that provide several improvements over the other methods. None of the examined methods could, by themselves, monitor the instantaneous position and motion of check valve internals and valve leakage; however, the combination of acoustic emission monitoring with one of the other methods provides the means to determine vital check valve operational information. This paper describes the benefits and limitations associated with each method and includes recent laboratory and field test data to illustrate the capabilities of these methods to detect simulated check valve degradation. 3 refs., 22 figs., 4 tabs

  17. Recent improvements in check valve monitoring methods

    International Nuclear Information System (INIS)

    Haynes, H.D.

    1991-01-01

    In support of the NRC Nuclear Plant Aging Research (NPAR) program, ORNL has carried out an evaluation of three check valve monitoring methods: acoustic emission, ultrasonic inspection, and magnetic flux signature analysis (MFSA). This work has focussed on determining the capabilities of each method to provide diagnostic information useful in determining check valve aging and service wear effects (degradation) and undesirable operating modes. In addition, as part of the ORNL Advanced Diagnostic Engineering Research and Development Center (ADEC), two novel nonintrusive monitoring methods were developed (external ac- and dc-magnetic monitoring) that provide several improvements over the other methods. None of the examined methods could, by themselves, monitor the instantaneous position and motion of check valve internals and valve leakage; however, the combination of acoustic emission monitoring with one of the other methods provides the means to determine vital check valve operational information. This paper describes the benefits and limitations associated with each method and includes recent laboratory and field test data to illustrate the capabilities of these methods to detect simulated check valve degradation. 3 refs., 22 figs., 4 tabs

  18. Quality checking of radioactive and hazardous waste

    International Nuclear Information System (INIS)

    Billington, D.M.; Burgoyne, S.M.J.; Dale, C.J.

    1992-01-01

    This report describes the work of the HMIP Waste Quality Checking Laboratory (WQCL) for the period September 1989 -August 1991. The WQCL has conducted research and development of procedures for the receipt, sampling and analysis of low level solid radioactive waste (LLW), intermediate level radioactive waste (ILW) and hazardous chemical waste (HW). Operational facilities have been commissioned for quality checking both LLW and HW. Waste quality checking has been completed on LLW packages seized from the UK waste disposal route by HMIP Inspectors. Packages have ranged in size from the 200 litre steel drum to half-height ISO freight container. Development work was continued on methods of sample extraction and radio-chemical analysis for cement encapsulated ILW in the form of magnox, graphite and stainless steel. This work was undertaken on non-radioactive simulants. (author)

  19. Glovebox pressure relief and check valve

    International Nuclear Information System (INIS)

    Blaedel, K.L.

    1986-01-01

    This device is a combined pressure relief valve and check valve providing overpressure protection and preventing back flow into an inert atmosphere enclosure. The pressure relief is embodied by a submerged vent line in a mercury reservior, the releif pressure being a function of the submerged depth. The pressure relief can be vented into an exhaust system and the relieving pressure is only slightly influenced by the varying pressure in the exhaust system. The check valve is embodied by a ball which floats on the mercury column and contacts a seat whenever vacuum exists within the glovebox enclosure. Alternatively, the check valve is embodied by a vertical column of mercury, the maximum back pressure being a function of the height of the column of mercury

  20. Glovebox pressure relief and check valve

    Energy Technology Data Exchange (ETDEWEB)

    Blaedel, K.L.

    1986-03-17

    This device is a combined pressure relief valve and check valve providing overpressure protection and preventing back flow into an inert atmosphere enclosure. The pressure relief is embodied by a submerged vent line in a mercury reservior, the releif pressure being a function of the submerged depth. The pressure relief can be vented into an exhaust system and the relieving pressure is only slightly influenced by the varying pressure in the exhaust system. The check valve is embodied by a ball which floats on the mercury column and contacts a seat whenever vacuum exists within the glovebox enclosure. Alternatively, the check valve is embodied by a vertical column of mercury, the maximum back pressure being a function of the height of the column of mercury.

  1. UTP and Temporal Logic Model Checking

    Science.gov (United States)

    Anderson, Hugh; Ciobanu, Gabriel; Freitas, Leo

    In this paper we give an additional perspective to the formal verification of programs through temporal logic model checking, which uses Hoare and He Unifying Theories of Programming (UTP). Our perspective emphasizes the use of UTP designs, an alphabetised relational calculus expressed as a pre/post condition pair of relations, to verify state or temporal assertions about programs. The temporal model checking relation is derived from a satisfaction relation between the model and its properties. The contribution of this paper is that it shows a UTP perspective to temporal logic model checking. The approach includes the notion of efficiency found in traditional model checkers, which reduced a state explosion problem through the use of efficient data structures

  2. UK Department of Environment Quality Checking Laboratory

    International Nuclear Information System (INIS)

    Burgoyne, K.E.; Green, T.H.; Maxwell, D.J.; Smith, D.L.G.

    1990-01-01

    The purpose of Taywood Engineering Ltd was to develop and evaluate techniques for the non-destructive and destructive examination of both low and intermediate level radioactive waste packages. The contract also included a study on the conceptual design and cost of a permanent Waste Quality Checking facility. The June 1986 contract was completed in November 1989. A second contract was awarded in September 1989 to extend the scope to include Quality Checking of hazardous waste and to increase the throughput of low level waste. This paper highlights the techniques developed during these programmes and applied to a range of real low level waste packages. The feasibility of operating a pilot scale facility for the independent Quality Checking of LLW has been successfully demonstrated. (orig.)

  3. Model checking exact cost for attack scenarios

    DEFF Research Database (Denmark)

    Aslanyan, Zaruhi; Nielson, Flemming

    2017-01-01

    Attack trees constitute a powerful tool for modelling security threats. Many security analyses of attack trees can be seamlessly expressed as model checking of Markov Decision Processes obtained from the attack trees, thus reaping the benefits of a coherent framework and a mature tool support....... However, current model checking does not encompass the exact cost analysis of an attack, which is standard for attack trees. Our first contribution is the logic erPCTL with cost-related operators. The extended logic allows to analyse the probability of an event satisfying given cost bounds and to compute...... the exact cost of an event. Our second contribution is the model checking algorithm for erPCTL. Finally, we apply our framework to the analysis of attack trees....

  4. A semi-structured English oral proficiency test for certification of teachers in South Africa

    Directory of Open Access Journals (Sweden)

    Carol A. Puhl

    2013-02-01

    Full Text Available South Africa has eleven official languages, but English is by far the most commonly used medium of instruction in schools. It is therefore essential that the English proficiency of preservice teachers be accurately assessed by means of a valid, reliable and feasible assessment instrument. As there are so many tertiary institutions responsible for teacher certification in the country, standards of oral assessment vary widely. This paper describes a semi-structured oral proficiency test, designed to meet these needs. Possibilities for further development of the test are explored Suid-Afrika erken elf amptelike tale, maar Engels is die medium wat verreweg die meeste in skole gebruik word Dit is dus noodsaaklik dat onderwysstudente se taalvaardigheid in Engels akkuraat gemeet moet kan word dm. v. 'n geldige, betroubare en toepaslike meetinstrument. Die feit dat so baie tersiere inrigtings in Suid-Afrika betrokke is by die sertifisering van onderwysers, lei onvermydelik tot groot skommelinge in standaarde. Hierdie artikel beskryf 'n semigestruktureerde mondelinge taalvaardigheidstoets wat ontwikkel is om in die behoeftes te voorsien. Moontlikhede vir die verdere ontwikkeling van die toets word ondersoek.

  5. Teachers' perceptions of students' mathematics proficiency may exacerbate early gender gaps in achievement.

    Science.gov (United States)

    Robinson-Cimpian, Joseph P; Lubienski, Sarah Theule; Ganley, Colleen M; Copur-Gencturk, Yasemin

    2014-04-01

    A recent wave of research suggests that teachers overrate the performance of girls relative to boys and hold more positive attitudes toward girls' mathematics abilities. However, these prior estimates of teachers' supposed female bias are potentially misleading because these estimates (and teachers themselves) confound achievement with teachers' perceptions of behavior and effort. Using data from the Early Childhood Longitudinal Study, Kindergarten Class of 1998-1999 (ECLS-K), Study 1 demonstrates that teachers actually rate boys' mathematics proficiency higher than that of girls when conditioning on both teachers' ratings of behavior and approaches to learning as well as past and current test scores. In other words, on average girls are only perceived to be as mathematically competent as similarly achieving boys when the girls are also seen as working harder, behaving better, and being more eager to learn. Study 2 uses mediation analysis with an instrumental-variables approach, as well as a matching strategy, to explore the extent to which this conditional underrating of girls may explain the widening gender gap in mathematics in early elementary school. We find robust evidence suggesting that underrating girls' mathematics proficiency accounts for a substantial portion of the development of the mathematics achievement gap between similarly performing and behaving boys and girls in the early grades. PsycINFO Database Record (c) 2014 APA, all rights reserved.

  6. Analytical quality control of neutron activation analysis by interlaboratory comparison and proficiency test

    International Nuclear Information System (INIS)

    Kim, S. H.; Moon, J. H.; Jeong, Y. S.

    2002-01-01

    Two air filters (V-50, P-50) artificially loaded with urban dust were provided from IAEA and trace elements to study inter-laboratory comparison and proficiency test were determined using instrumental neutron activation analysis non-destructively. Standard reference material(Urban Particulate Matter, NIST SRM 1648) of National Institute of Standard and Technology was used for internal analytical quality control. About 20 elements in each loaded filter sample were determined, respectively. Our analytical data were compared with statistical results using neutron activation analysis, particle induced X-ray emission spectrometry, inductively coupled plasma mass spectroscopy, etc., which were collected from 49 laboratories of 40 countries. From the results that were statistically re-treated with reported values, Z-scores of our analytical values are within ±2. In addition, the results of proficiency test are passed and accuracy and precision of the analytical values are reliable. Consequently, it was proved that analytical quality control for the analysis of air dust samples is reasonable

  7. First year evaluation of EPA's radon contractor proficiency (RCP) program

    International Nuclear Information System (INIS)

    Salmon, G.L.

    1990-01-01

    This paper reports that the Environmental Protection Agency (EPA) has developed a voluntary program to evaluate radon reduction contractors and provide this information to the public, as part of activities mandated by the Indoor Radon Abatement Act (IRAA) of 1988. The Radon Contractor Proficiency Program consists of several elements that collectively help to ensure the proficiency of radon mitigators and give the public greater confidence in their capability. Contractors who participate in the program must pass a written examination, adhere to mitigation guidelines, keep records of work, meet continuing education requirements and pass a re-examination every two years. Upon meeting the program's requirements, mitigators are listed in EPA's National RCP Proficiency Report. The first Report released on May 15, 1990 listed 636 contractors. The second Report, to be release in August, will list 895 contractors, representing an increase of 40 per cent

  8. Physical activity and movement skills proficiency of young Filipino children.

    Science.gov (United States)

    Capio, Catherine M; Sit, Cindy H P; Eguia, Kathlynne F; Abernethy, Bruce

    2014-08-01

    Recent reports indicate an increasing prevalence of overweight among Filipino children. Considering the known association of physical activity (PA) with obesity, this study reports the findings of an objective monitoring of PA in a sample of Filipino children. The study also explores the relationship of PA with fundamental movement skills (FMS) proficiency. Thirty-two children (6.54 ± 2.45 years old) wore an accelerometer for 7 days of PA monitoring and were assessed on five FMS (throw, catch, kick, run, jump). The children met the World Health Organization's recommendation of 60 min of PA per day, with more active time being accrued during weekdays than weekends. Children with greater FMS proficiency were found to spend more time in PA than those who were less skillful during weekends. Further research is recommended to examine PA and FMS proficiency associations, exploring the role of social interactions on weekends and weekdays. © 2014 Japan Pediatric Society.

  9. Consistency Checking of Web Service Contracts

    DEFF Research Database (Denmark)

    Cambronero, M. Emilia; Okika, Joseph C.; Ravn, Anders Peter

    2008-01-01

    Behavioural properties are analyzed for web service contracts formulated in Business Process Execution Language (BPEL) and Choreography Description Language (CDL). The key result reported is an automated technique to check consistency between protocol aspects of the contracts. The contracts...... are abstracted to (timed) automata and from there a simulation is set up, which is checked using automated tools for analyzing networks of finite state processes. Here we use the Concurrency Work Bench. The proposed techniques are illustrated with a case study that include otherwise difficult to analyze fault...

  10. A Method for Model Checking Feature Interactions

    DEFF Research Database (Denmark)

    Pedersen, Thomas; Le Guilly, Thibaut; Ravn, Anders Peter

    2015-01-01

    This paper presents a method to check for feature interactions in a system assembled from independently developed concurrent processes as found in many reactive systems. The method combines and refines existing definitions and adds a set of activities. The activities describe how to populate the ...... the definitions with models to ensure that all interactions are captured. The method is illustrated on a home automation example with model checking as analysis tool. In particular, the modelling formalism is timed automata and the analysis uses UPPAAL to find interactions....

  11. Acoustic emission testing of piston check valves

    International Nuclear Information System (INIS)

    Stewart, D.L.

    1994-01-01

    Based on test experience at Comanche Peak Unit 1, an acoustic emission data evaluation matrix for piston check valves has been developed. The degradations represented in this matrix were selected based on Edwards piston check valve failure data reported in the Nuclear Plant Reliability Data System. Evidence to support this matrix was collected from site test data on a variety of valve types. Although still under refinement, the matrix provides three major attributes for closure verification, which have proven useful in developing test procedures for inservice testing and preventing unnecessary disassembly

  12. Implementing Check in/Check out for Students with Intellectual Disability in Self-Contained Classrooms

    Science.gov (United States)

    Boden, Lauren J.; Ennis, Robin P.; Jolivette, Kristine

    2012-01-01

    Check in/check out (CICO) is a secondary-tier intervention implemented within the framework of schoolwide positive behavior interventions and supports (SWPBIS) that uses school-based contingencies to encourage positive behavior. CICO is a five-step cycle which uses daily progress report cards (DPR) to monitor progress toward schoolwide or…

  13. Can i just check...? Effects of edit check questions on measurement error and survey estimates

    NARCIS (Netherlands)

    Lugtig, Peter; Jäckle, Annette

    2014-01-01

    Household income is difficult to measure, since it requires the collection of information about all potential income sources for each member of a household.Weassess the effects of two types of edit check questions on measurement error and survey estimates: within-wave edit checks use responses to

  14. Check In / Check Out. The Public Space as an Internet of Things

    NARCIS (Netherlands)

    van t Hof, C.C.G.; van Est, R.; Daemen, F.

    2011-01-01

    Mobile phones, public transport smart cards, security cameras and GPS systems in our car - we are surrounded by digital devices. They track us, guide us, help us, and control us. The book Check In / Check Out. The Public Space as an Internet of Things shows us how our digital and physical worlds are

  15. Check in / check out : the public space as an internet of things

    NARCIS (Netherlands)

    Hof, van 't C.; Est, van R.; Daemen, F.

    2011-01-01

    Mobile phones, public transport smart cards, security cameras and GPS systems in our car - we are surrounded by digital devices. They track us, guide us, help us, and control us. The book Check In / Check Out. The Public Space as an Internet of Things shows us how our digital and physical worlds are

  16. What is a good health check? An interview study of health check providers' views and practices.

    Science.gov (United States)

    Stol, Yrrah H; Asscher, Eva C A; Schermer, Maartje H N

    2017-10-02

    Health checks identify (risk factors for) disease in people without symptoms. They may be offered by the government through population screenings and by other providers to individual users as 'personal health checks'. Health check providers' perspective of 'good' health checks may further the debate on the ethical evaluation and possible regulation of these personal health checks. In 2015, we interviewed twenty Dutch health check providers on criteria for 'good' health checks, and the role these criteria play in their practices. Providers unanimously formulate a number of minimal criteria: Checks must focus on (risk factors for) treatable/preventable disease; Tests must be reliable and clinically valid; Participation must be informed and voluntary; Checks should provide more benefits than harms; Governmental screenings should be cost-effective. Aspirational criteria mentioned were: Follow-up care should be provided; Providers should be skilled and experienced professionals that put the benefit of (potential) users first; Providers should take time and attention. Some criteria were contested: People should be free to test on any (risk factor for) disease; Health checks should only be performed in people at high risk for disease that are likely to implement health advice; Follow up care of privately funded tests should not drain on collective resources. Providers do not always fulfil their own criteria. Their reasons reveal conflicts between criteria, conflicts between criteria and other ethical values, and point to components in the (Dutch) organisation of health care that hinder an ethical provision of health checks. Moreover, providers consider informed consent a criterion that is hard to establish in practice. According to providers, personal health checks should meet the same criteria as population screenings, with the exception of cost-effectiveness. Providers do not always fulfil their own criteria. Results indicate that in thinking about the ethics of health

  17. Instrumentation development

    International Nuclear Information System (INIS)

    Ubbes, W.F.; Yow, J.L. Jr.

    1988-01-01

    Instrumentation is developed for the Civilian Radioactive Waste Management Program to meet several different (and sometimes conflicting) objectives. This paper addresses instrumentation development for data needs that are related either directly or indirectly to a repository site, but does not touch on instrumentation for work with waste forms or other materials. Consequently, this implies a relatively large scale for the measurements, and an in situ setting for instrument performance. In this context, instruments are needed for site characterization to define phenomena, develop models, and obtain parameter values, and for later design and performance confirmation testing in the constructed repository. The former set of applications is more immediate, and is driven by the needs of program design and performance assessment activities. A host of general technical and nontechnical issues have arisen to challenge instrumentation development. Instruments can be classed into geomechanical, geohydrologic, or other specialty categories, but these issues cut across artificial classifications. These issues are outlined. Despite this imposing list of issues, several case histories are cited to evaluate progress in the area

  18. The Canadian experience in performing accuracy checks on administered doses of radiopharmaceuticals

    International Nuclear Information System (INIS)

    Santry, Dallas

    1998-01-01

    A calibration service was introduced in 1986 to assist the Canadian nuclear medicine community in determining more accurately the amount of radioactive material administered to patients for either diagnostic or therapeutic purposes. This aspect of a quality assurance program in nuclear medicine provides an accuracy check on instruments and the technologists using them. The calibration report issued constitutes direct traceability of a facility to a national standards laboratory. Nuclides most frequently calibrated are 99m Tc and 131 I. Others include 67 Ga, 111 In, 123 I, 125 I and 201 Tl. All samples received are analysed for radionuclidic impurities by high-resolution X-ray and gamma-ray spectrometry. Ten years of testing has shown that, except for a few conscientious departments, accuracy checks on radionuclide (dose) calibrators are not a high priority. There are 285 nuclear medicine facilities in Canada and, since there is no legal requirement that the calibrators be checked for accuracy, only 29 have had their instruments checked using this service. Of these, 14 perform annual accuracy checks with NRCC. In this paper, the results of the intercomparisons are described, and quality control problems associated with the use of radionuclide calibrators in nuclear medicine are discussed

  19. Type checking by domain analysis in Ampersand

    NARCIS (Netherlands)

    Joosten, S.M.M.; Joosten, S.J.C.; Kahl, W.; Winter, M.; Oliveira, J.N.

    2015-01-01

    In the process of incorporating subtyping in relation algebra, an algorithm was found to derive the subtyping relation from the program to be checked. By using domain analysis rather than type inference, this algorithm offers an attractive visualization of the type derivation process. This

  20. Inkjet 3D printed check microvalve

    International Nuclear Information System (INIS)

    Walczak, Rafał; Adamski, Krzysztof; Lizanets, Danylo

    2017-01-01

    3D printing enables fast and relatively easy fabrication of various microfluidic structures including microvalves. A check microvalve is the simplest valve enabling control of the fluid flow in microchannels. Proper operation of the check valve is ensured by a movable element that tightens the valve seat during backward flow and enables free flow for forward pressure. Thus, knowledge of the mechanical properties of the movable element is crucial for optimal design and operation of the valve. In this paper, we present for the first time the results of investigations on basic mechanical properties of the building material used in multijet 3D printing. Specified mechanical properties were used in the design and fabrication of two types of check microvalve—with deflecting or hinge-fixed microflap—with 200 µ m and 300 µ m thickness. Results of numerical simulation and experimental data of the microflap deflection were obtained and compared. The valves were successfully 3D printed and characterised. Opening/closing characteristics of the microvalve for forward and backward pressures were determined. Thus, proper operation of the check microvalve so developed was confirmed. (technical note)

  1. Statistical Model Checking for Biological Systems

    DEFF Research Database (Denmark)

    David, Alexandre; Larsen, Kim Guldstrand; Legay, Axel

    2014-01-01

    Statistical Model Checking (SMC) is a highly scalable simulation-based verification approach for testing and estimating the probability that a stochastic system satisfies a given linear temporal property. The technique has been applied to (discrete and continuous time) Markov chains, stochastic...

  2. Separation of Powers: Checks and Balances.

    Science.gov (United States)

    Taylor, Bonnie

    1988-01-01

    This article offers a class activity on separation of powers and checks and balances within the U.S. government. Based on Franklin Delano Roosevelt's attempt to push through legislation for the New Deal of the 1930s by "packing" the U.S. Supreme Court, the activity includes worksheets and teaching suggestions. (JDH)

  3. Political and judicial checks on corruption

    DEFF Research Database (Denmark)

    Alt, James E.; Lassen, David Dreyer

    2008-01-01

    This paper investigates the effects of checks and balances on corruption. Within a presidential system, effective separation of powers is achieved under a divided government, with the executive and legislative branches being controlled by different political parties. When government is unified...

  4. Functional check of telescoping transfer pumps

    International Nuclear Information System (INIS)

    Sharpe, C.L.

    1994-01-01

    Activities are defined which constitute a functional check of a telescoping transfer pump (TTP). This report is written to the Procedures group of HLW and particularly applies to those TTP's which are the sole means of emergency transfer from a HLW waste tank

  5. Model checking the HAVi leader election protocol

    NARCIS (Netherlands)

    J.M.T. Romijn (Judi)

    1999-01-01

    textabstractThe HAVi specification proposes an architecture for audio/video interoperability in home networks. Part of the HAVi specification is a distributed leader election protocol. We have modelled this leader election protocol in Promela and Lotos and have checked several properties with the

  6. Model Checking - Automated Verification of Computational Systems

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 14; Issue 7. Model Checking - Automated Verification of Computational Systems. Madhavan Mukund. General Article Volume 14 Issue 7 July 2009 pp 667-681. Fulltext. Click here to view fulltext PDF. Permanent link:

  7. checkCIF/PLATON report Datablock: Sm

    Indian Academy of Sciences (India)

    checkCIF/PLATON report. You have not supplied any structure factors. As a result the full set of tests cannot be run. THIS REPORT IS FOR GUIDANCE ONLY. IF USED AS PART OF A REVIEW PROCEDURE. FOR PUBLICATION, IT SHOULD NOT REPLACE THE EXPERTISE OF AN EXPERIENCED. CRYSTALLOGRAPHIC ...

  8. checkCIF/PLATON report Datablock: neu

    Indian Academy of Sciences (India)

    checkCIF/PLATON report. You have not supplied any structure factors. As a result the full set of tests cannot be run. THIS REPORT IS FOR GUIDANCE ONLY. IF USED AS PART OF A REVIEW PROCEDURE. FOR PUBLICATION, IT SHOULD NOT REPLACE THE EXPERTISE OF AN EXPERIENCED. CRYSTALLOGRAPHIC ...

  9. checkCIF/PLATON report Datablock: shelxl

    Indian Academy of Sciences (India)

    checkCIF/PLATON report. You have not supplied any structure factors. As a result the full set of tests cannot be run. THIS REPORT IS FOR GUIDANCE ONLY. IF USED AS PART OF A REVIEW PROCEDURE. FOR PUBLICATION, IT SHOULD NOT REPLACE THE EXPERTISE OF AN EXPERIENCED. CRYSTALLOGRAPHIC ...

  10. checkCIF/PLATON report Datablock: 6

    Indian Academy of Sciences (India)

    checkCIF/PLATON report. You have not supplied any structure factors. As a result the full set of tests cannot be run. THIS REPORT IS FOR GUIDANCE ONLY. IF USED AS PART OF A REVIEW PROCEDURE. FOR PUBLICATION, IT SHOULD NOT REPLACE THE EXPERTISE OF AN EXPERIENCED. CRYSTALLOGRAPHIC ...

  11. checkCIF/PLATON report Datablock: 1

    Indian Academy of Sciences (India)

    (Positive) Residual Density 13.61 eA-3. PLAT201_ALERT_2_B Isotropic non-H Atoms in Main Residue(s) . ... Weight Differ by .. 4.99 Check. PLAT094_ALERT_2_C Ratio of Maximum / Minimum Residual Density . ... 9 ALERT type 1 CIF construction/syntax error, inconsistent or missing data. 20 ALERT type 2 Indicator that ...

  12. Type checking with open type functions

    DEFF Research Database (Denmark)

    Schrijvers, Tom; Jones, Simon Peyton; Chakravarty, Manual

    2008-01-01

    We report on an extension of Haskell with open type-level functions and equality constraints that unifies earlier work on GADTs, functional dependencies, and associated types. The contribution of the paper is that we identify and characterise the key technical challenge of entailment checking; an...

  13. Discrete-time rewards model-checked

    NARCIS (Netherlands)

    Larsen, K.G.; Andova, S.; Niebert, Peter; Hermanns, H.; Katoen, Joost P.

    2003-01-01

    This paper presents a model-checking approach for analyzing discrete-time Markov reward models. For this purpose, the temporal logic probabilistic CTL is extended with reward constraints. This allows to formulate complex measures – involving expected as well as accumulated rewards – in a precise and

  14. Regular Check-Ups Are Important

    Science.gov (United States)

    ... Attack Wear Red for Heart Health Tools for Pregnant Women, New Moms, Women Considering Pregnancy Be a Healthy ... your community (i.e. a faith-based setting, workplace, school, or civic group) ... screening on National Women’s Check-Up Day (the day after Mother’s Day ...

  15. checkCIF/PLATON report Datablock: 2

    Indian Academy of Sciences (India)

    checkCIF/PLATON report. You have not supplied any structure factors. As a result the full set of tests cannot be run. THIS REPORT IS FOR GUIDANCE ONLY. IF USED AS PART OF A REVIEW PROCEDURE. FOR PUBLICATION, IT SHOULD NOT REPLACE THE EXPERTISE OF AN EXPERIENCED. CRYSTALLOGRAPHIC ...

  16. checkCIF/PLATON report Datablock: sm

    Indian Academy of Sciences (India)

    checkCIF/PLATON report. You have not supplied any structure factors. As a result the full set of tests cannot be run. THIS REPORT IS FOR GUIDANCE ONLY. IF USED AS PART OF A REVIEW PROCEDURE. FOR PUBLICATION, IT SHOULD NOT REPLACE THE EXPERTISE OF AN EXPERIENCED. CRYSTALLOGRAPHIC ...

  17. Type Checking with XML Schema in XACT

    DEFF Research Database (Denmark)

    Kirkegaard, Christian; Møller, Anders

    to support XML Schema as type formalism. The technique is able to model advanced features, such as type derivations and overloaded local element declarations, and also datatypes of attribute values and character data. Moreover, we introduce optional type annotations to improve modularity of the type checking...

  18. checkCIF/PLATON report Datablock: I

    Indian Academy of Sciences (India)

    The relevant atom site should be identified. STRVA01_ALERT_4_C. Flack test results are ambiguous. ... 7 ALERT type 3 Indicator that the structure quality may be low. 5 ALERT type 4 Improvement, methodology, query or ... paper, to upload your CIF via our web site. PLATON version of 20/08/2014; check.def file version of ...

  19. checkCIF/PLATON report Datablock: shelxl

    Indian Academy of Sciences (India)

    6 ALERT level G = General information/check it is not something unexpected. 1 ALERT type 1 CIF construction/syntax error, inconsistent or missing data. 15 ALERT type 2 Indicator that the structure model may be wrong or deficient. 9 ALERT type 3 Indicator that the structure quality may be low. 1 ALERT type 4 Improvement, ...

  20. checkCIF/PLATON report Datablock: shelx

    Indian Academy of Sciences (India)

    7 ALERT level G = General information/check it is not something unexpected. 0 ALERT type 1 CIF construction/syntax error, inconsistent or missing data. 3 ALERT type 2 Indicator that the structure ... However, the purpose of your study may justify the reported deviations and the more serious of these should normally be ...

  1. checkCIF/PLATON report Datablock: 1

    Indian Academy of Sciences (India)

    6 ALERT level G = General information/check it is not something unexpected. 2 ALERT type 1 CIF construction/syntax error, inconsistent or missing data. 8 ALERT type 2 Indicator that the structure ... However, the purpose of your study may justify the reported deviations and the more serious of these should normally be ...

  2. checkCIF/PLATON report Datablock: 3

    Indian Academy of Sciences (India)

    5 ALERT level G = General information/check it is not something unexpected. 5 ALERT type 1 CIF construction/syntax error, inconsistent or missing data. 15 ALERT type 2 Indicator that the structure ... However, the purpose of your study may justify the reported deviations and the more serious of these should normally be ...

  3. checkCIF/PLATON report Datablock: 3

    Indian Academy of Sciences (India)

    5 ALERT level G = General information/check it is not something unexpected. 0 ALERT type 1 CIF construction/syntax error, inconsistent or missing data. 3 ALERT type 2 Indicator that the structure ... However, the purpose of your study may justify the reported deviations and the more serious of these should normally be ...

  4. checkCIF/PLATON report Datablock: shelxl

    Indian Academy of Sciences (India)

    6 ALERT level G = General information/check it is not something unexpected. 0 ALERT type 1 CIF construction/syntax error, inconsistent or missing data. 4 ALERT type 2 Indicator that the structure ... However, the purpose of your study may justify the reported deviations and the more serious of these should normally be ...

  5. Slicing AADL specifications for model checking

    NARCIS (Netherlands)

    Odenbrett, M.R.; Nguyen, V.Y.; Noll, T.

    2010-01-01

    To combat the state-space explosion problem in model checking larger systems, abstraction techniques can be employed. Here, methods that operate on the system specification before constructing its state space are preferable to those that try to minimize the resulting transition system as they

  6. Blood Pressure Matters: Keep Hypertension in Check

    Science.gov (United States)

    ... 2016 Print this issue Blood Pressure Matters Keep Hypertension in Check En español Send us your comments ... 1 in 3 adults in the U.S. has high blood pressure, but many don’t realize it. High blood ...

  7. CIEMAT Interlaboratories Comparison of the Results obtained in the Proficiency Test Run by IAEA; Comparacion Interlaboratorios del CIEMAT de los Resultados Obtenidos en la Prueba de Capacitacion de Analisis de Transuranicos en Cenizas propocionadas por el OIEA

    Energy Technology Data Exchange (ETDEWEB)

    Gasco, C.; Anton, M. P.; Alvarez, A.; Navarro, N.; Meral, J.; Gonzalez, A.; Higueras Lafaja, E. [Ciemat. Madrid (Spain)

    2000-07-01

    This report contains the results obtained by two different laboratories from CIEMAT after participating in the Proficiency Test organised by IAEA (International Atomic Energy Agency) in 1999. This test involves the analysis of fly ashes containing natural radionuclides and different amounts of added transuranics. The extraction techniques, counting methods and results obtained are detailed. This type of test are used for the labs to achieve their accreditation and check the reliability of the procedures routinely employed. (Author) 4 refs.

  8. Instrumental analysis

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Seung Jae; Seo, Seong Gyu

    1995-03-15

    This textbook deals with instrumental analysis, which consists of nine chapters. It has Introduction of analysis chemistry, the process of analysis and types and form of the analysis, Electrochemistry on basic theory, potentiometry and conductometry, electromagnetic radiant rays and optical components on introduction and application, Ultraviolet rays and Visible spectrophotometry, Atomic absorption spectrophotometry on introduction, flame emission spectrometry and plasma emission spectrometry. The others like infrared spectrophotometry, X-rays spectrophotometry and mass spectrometry, chromatography and the other instrumental analysis like radiochemistry.

  9. Instrumental analysis

    International Nuclear Information System (INIS)

    Kim, Seung Jae; Seo, Seong Gyu

    1995-03-01

    This textbook deals with instrumental analysis, which consists of nine chapters. It has Introduction of analysis chemistry, the process of analysis and types and form of the analysis, Electrochemistry on basic theory, potentiometry and conductometry, electromagnetic radiant rays and optical components on introduction and application, Ultraviolet rays and Visible spectrophotometry, Atomic absorption spectrophotometry on introduction, flame emission spectrometry and plasma emission spectrometry. The others like infrared spectrophotometry, X-rays spectrophotometry and mass spectrometry, chromatography and the other instrumental analysis like radiochemistry.

  10. LOFT instrumentation

    International Nuclear Information System (INIS)

    Bixby, W.W.

    1979-01-01

    A description of instrumentation used in the Loss-of-Fluid Test (LOFT) large break Loss-of-Coolant Experiments is presented. Emphasis is placed on hydraulic and thermal measurements in the primary system piping and components, reactor vessel, and pressure suppression system. In addition, instrumentation which is being considered for measurement of phenomena during future small break testing is discussed. (orig.) 891 HP/orig. 892 BRE [de

  11. Stability check source measurements with a secondary standard dosimeter in SSDL-Pakistan

    International Nuclear Information System (INIS)

    Salman, S.; Mahmoud, K.; Orfi, S.D.

    1988-01-01

    The stability check source is an integral part of a Secondary Standard Dosimetry System. The purpose of the stability check source is to confirm that the overall response of the dosimeter has not changed significantly since the instrument was calibrated. In case any change in the sensitivity of the ionization chamber or measuring assembly occurs the same is reflected in the reference check source measurements. Stability check source measurements are taken in a Primary Standard Dosimetry Laboratory (PSDL) at the time of calibration of secondary standard dosimeter and mean time (in seconds) to the reference setting of 50 scale divisions with ambient conditions of air at 20 deg. C, 101.3 kPa and 50% RH is quoted in a calibration certificate. This quoted stability check source time figure is the basis for future confirmation of overall response of the secondary standard dosimeter system. This note presents the results of stability check source measurements carried out in SSDL Pakistan over a period of five years

  12. Impact of Bilingual Education Programs on Limited English Proficient Students and Their Peers

    DEFF Research Database (Denmark)

    Daysal, N. Meltem; Chin, Aimee; Imberman, Scott

    2013-01-01

    bilingual education above this 20-student cutoff. Using this discontinuity as an instrument for district bilingual education provision, we find that providing bilingual education programs (relative to providing only English as a Second Language programs) does not significantly impact the standardized test...... scores of students with Spanish as their home language (comprised primarily of ever-LEP students). However, we find significant positive impacts on non-LEP students’ achievement, which indicates that education programs for LEP students have spillover effects to non-LEP students.......Texas requires a school district to offer bilingual education when its enrollment of limited English proficient (LEP) students in a particular elementary grade and language is twenty or higher. Using school panel data, we find a significant increase in the probability that a district provides...

  13. 31 CFR 248.6 - Recovery of original check.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Recovery of original check. 248.6... § 248.6 Recovery of original check. (a) If the claimant recovers an original check after he has... or agency concerned regarding the negotiability of such original check. (b) In the event the...

  14. Online Assessment of Oral Proficiency for Intercultural Professional Communication

    NARCIS (Netherlands)

    Rusman, Ellen; Stoyanov, Slavi

    2012-01-01

    Rusman, E., & Stoyanov, S. (2011, 18 May). Online Assessment of Oral Proficiency for Intercultural Professional Communication. Presentation about the CEFcult project (www.cefcult.eu) at the workshop ‘Crossing borders’ organised by the Talenacademie, Heerlen, The Netherlands: Open University in the

  15. Cultutal Factors Affecting English Proficiency in Rural Areas

    Science.gov (United States)

    Ler, Ee Chop

    2012-01-01

    The purpose of this study is to investigate the rural "cultural" problems and to determine their effect on the learning of English. Twenty students from different ethnic backgrounds and English language proficiency in six rural schools in Terengganu, Malaysia were interviewed. In addition the teachers also from different rural schools…

  16. Predicting the Proficiency Level of Language Learners Using Lexical Indices

    Science.gov (United States)

    Crossley, Scott A.; Salsbury, Tom; McNamara, Danielle S.

    2012-01-01

    This study explores how second language (L2) texts written by learners at various proficiency levels can be classified using computational indices that characterize lexical competence. For this study, 100 writing samples taken from 100 L2 learners were analyzed using lexical indices reported by the computational tool Coh-Metrix. The L2 writing…

  17. Pathways from Toddler Information Processing to Adolescent Lexical Proficiency

    Science.gov (United States)

    Rose, Susan A.; Feldman, Judith F.; Jankowski, Jeffery J.

    2015-01-01

    This study examined the relation of 3-year core information-processing abilities to lexical growth and development. The core abilities covered four domains--memory, representational competence (cross-modal transfer), processing speed, and attention. Lexical proficiency was assessed at 3 and 13 years with the Peabody Picture Vocabulary Test (PPVT)…

  18. Determinants of Second Language Proficiency among Refugees in the Netherlands

    Science.gov (United States)

    van Tubergen, Frank

    2010-01-01

    Little is known about the language acquisition of refugees in Western countries. This study examines how pre- and post-migration characteristics of refugees are related to their second language proficiency. Data are from a survey of 3,500 refugees, who were born in Afghanistan, Iran, Iraq, former Yugoslavia and Somalia, and who resided in the…

  19. Proficiency test on incurred and spiked pesticide residues in cereals

    DEFF Research Database (Denmark)

    Poulsen, Mette Erecius; Christensen, Hanne Bjerre; Herrmann, Susan Strange

    2009-01-01

    A proficiency test on incurred and spiked pesticide residues in wheat was organised in 2008. The test material was grown in 2007 and treated in the field with 14 pesticides formulations containing the active substances, alpha-cypermethrin, bifentrin, carbendazim, chlormequat, chlorpyrifos...

  20. Reading Processing Skills among EFL Learners in Different Proficiency Levels

    Science.gov (United States)

    Dhanapala, Kusumi Vasantha; Yamada, Jun

    2015-01-01

    This study aims to understand how EFL learners in different reading proficiency levels comprehend L2 texts, using five-component skills involving measures of (1) vocabulary knowledge, (2) drawing inferences and predictions, (3) knowledge of text structure and discourse organization, (4) identifying the main idea and summarizing skills, and (5)…

  1. Determinants of second language proficiency among refugees in the Netherlands

    NARCIS (Netherlands)

    Tubergen, F.A. van

    2010-01-01

    Little is known about the language acquisition of refugees in Western countries. This study examines how pre- and post-migration characteristics of refugees are related to their second language proficiency. Data are from a survey of 3,500 refugees, who were born in Afghanistan, Iran, Iraq, former

  2. A new role of proficiency testing in nuclear analytical work

    DEFF Research Database (Denmark)

    Heydorn, Kaj

    2008-01-01

    The most recent definition of measurement result requires a statement of uncertainty whenever results obtained by nuclear or other quantitative methods of analysis are reported. Proficiency testing (PT) therefore must include the ability of laboratories to present not only unbiased quantity values...

  3. The Effects of Elementary Departmentalization on Mathematics Proficiency

    Science.gov (United States)

    Taylor-Buckner, Nicole C.

    2014-01-01

    Mathematics education in the elementary schools has experienced many changes in recent decades. With the curriculum becoming more complex as a result of each modification, immense pressure has been put on schools to increase student proficiency. The Common Core State Standards is the latest example of this. These revisions to the mathematics…

  4. Motor proficiency and physical fitness in active and inactive girls ...

    African Journals Online (AJOL)

    In modern day society physical activity levels diminish rapidly among girls and may be a direct consequence of girls experiencing motor difficulties. Therefore the aim of the study was to compare motor proficiency levels and physical fitness levels among active and inactive girls (N=97), aged 12 to 13 years. The BOTMP ...

  5. Beyond Host Language Proficiency: Coping Resources Predicting International Students' Satisfaction

    Science.gov (United States)

    Mak, Anita S.; Bodycott, Peter; Ramburuth, Prem

    2015-01-01

    As international students navigate in a foreign educational environment, having higher levels of coping or stress-resistance resources--both internal and external--could be related to increased satisfaction with personal and university life. The internal coping resources examined in this study were host language proficiency, self-esteem,…

  6. Developing Autonomous Learning for Oral Proficiency Using Digital Storytelling

    Science.gov (United States)

    Kim, SoHee

    2014-01-01

    Since online educational technology can support a ubiquitous language learning environment, there are many ways to develop English learners' autonomy through self-access learning. This study investigates whether English as a second language (ESL) learners can improve their oral proficiency through independent study by using online self-study…

  7. Advisory Working Alliance, Perceived English Proficiency, and Acculturative Stress

    Science.gov (United States)

    Wei, Meifen; Tsai, Pei-Chun; Chao, Ruth Chu-Lien; Du, Yi; Lin, Shu-Ping

    2012-01-01

    The aim of this study was to examine the moderators of (a) general or cross-cultural advisory working alliances and (b) perceived English proficiency on the association between acculturative stress and psychological distress. A total of 143 East Asian international students completed an online survey. Results from a hierarchical regression…

  8. The Education Consequences of Language Proficiency for Young Children

    NARCIS (Netherlands)

    Yao, Yuxin; Ohinata, Asako; van Ours, Jan

    2016-01-01

    This paper studies the educational consequences of language proficiency by investigating the relationship between dialect-speaking and academic performance of 5-6 year old children in the Netherlands. We find that dialect-speaking has a modestly negative effect on boys' language test scores. In

  9. The educational consequences of language proficiency for young children

    NARCIS (Netherlands)

    Yao, Yuxin; Ohinata, Asako; van Ours, Jan

    2016-01-01

    Our paper studies the educational consequences of language proficiency by investigating the relationship between dialect-speaking and academic performance of 5–6 year old children in the Netherlands. We find that dialect-speaking has a modestly negative effect on boys’ language test scores. In

  10. Teaching Mathematical Problem Solving to Students with Limited English Proficiency.

    Science.gov (United States)

    Kaplan, Rochelle G.; Patino, Rodrigo A.

    Many mainstreamed students with limited English proficiency continue to face the difficulty of learning English as a second language (ESL) while studying mathematics and other content areas framed in the language of native speakers. The difficulty these students often encounter in mathematics classes and their poor performance on subsequent…

  11. Naming Abilities in Low-Proficiency Second Language Learners

    Science.gov (United States)

    Borodkin, Katy; Faust, Miriam

    2014-01-01

    Difficulties in second language (L2) learning are often associated with recognizable learning difficulties in native language (L1), such as in dyslexia. However, some individuals have low L2 proficiency but intact L1 reading skills. These L2 learners experience frequent tip-of-the-tongue states while naming in L1, which indicates that they have a…

  12. Differential Effects of Learning Games on Mathematics Proficiency

    Science.gov (United States)

    Chang, Mido; Evans, Michael A.; Kim, Sunha; Norton, Anderson; Samur, Yavuz

    2015-01-01

    This study examined the effects of a learning game, [The Math App] on the mathematics proficiency of middle school students. For the study, researchers recruited 306 students, Grades 6-8, from two schools in rural southwest Virginia. Over a nine-week period, [The Math App] was deployed as an intervention for investigation. Students were assigned…

  13. Listening and Reading Proficiency Levels of College Students

    Science.gov (United States)

    Tschirner, Erwin

    2016-01-01

    This article examines listening and reading proficiency levels of U.S. college foreign language students at major milestones throughout their undergraduate career. Data were collected from more than 3,000 participants studying seven languages at 21 universities and colleges across the United States. The results show that while listening…

  14. Impact of English Proficiency on Academic Performance of International Students

    Science.gov (United States)

    Martirosyan, Nara M.; Hwang, Eunjin; Wanjohi, Reubenson

    2015-01-01

    Using an ex-post facto, non-experimental approach, this research examined the impact of English language proficiency and multilingualism on the academic performance of international students enrolled in a four-year university located in north central Louisiana in the United States. Data were collected through a self-reported questionnaire from 59…

  15. Linguistic Proficiency and Strategies on Reading Performance in English

    Science.gov (United States)

    Talebi, Seyed Hassan

    2015-01-01

    General English (L2) proficiency and reading strategies are believed to be highly effective in successful reading performance. However, available studies rarely investigated the combined effects of these two variables on successful reading. To fill this gap, 78 university students were divided into four groups of different degrees of these two…

  16. Music Teachers in Turkey: Their Proficiency, Working Environments and Problems

    Science.gov (United States)

    Otacioglu, Sena Gursen

    2008-01-01

    The aim of this study was the collection of data concerning Turkish music teachers' proficiency and their place in the primary and secondary education system. In addition, information was collected regarding the teachers' working environment and professional complications. A total of 200 music teachers' opinions were compiled for the determination…

  17. Planes, Politics and Oral Proficiency: Testing International Air Traffic Controllers

    Science.gov (United States)

    Moder, Carol Lynn; Halleck, Gene B.

    2009-01-01

    This study investigates the variation in oral proficiency demonstrated by 14 Air Traffic Controllers across two types of testing tasks: work-related radio telephony-based tasks and non-specific English tasks on aviation topics. Their performance was compared statistically in terms of level ratings on the International Civil Aviation Organization…

  18. Foreign Language Teachers' Language Proficiency and Their Language Teaching Practice

    Science.gov (United States)

    Richards, Heather; Conway, Clare; Roskvist, Annelies; Harvey, Sharon

    2013-01-01

    Teachers' subject knowledge is recognized as an essential component of effective teaching. In the foreign language context, teachers' subject knowledge includes language proficiency. In New Zealand high schools, foreign languages (e.g. Chinese, French, German, Japanese and Spanish) have recently been offered to learners earlier in their schooling,…

  19. Rater Judgment and English Language Speaking Proficiency. Research Report

    Science.gov (United States)

    Chalhoub-Deville, Micheline; Wigglesworth, Gillian

    2005-01-01

    The paper investigates whether there is a shared perception of speaking proficiency among raters from different English speaking countries. More specifically, this study examines whether there is a significant difference among English language learning (ELL) teachers, residing in Australia, Canada, the UK, and the USA when rating speech samples of…

  20. P-2 Years Targeted to Achieve Grade 3 Reading Proficiency

    Science.gov (United States)

    Gewertz, Catherine

    2011-01-01

    In a bid to help more students read proficiently in 3rd grade--a skill considered critical to their future educational success--new laws and initiatives springing up around the country require educators to step up their efforts to identify and help struggling readers even before they enter kindergarten. It's not unusual for states or school…

  1. Trends in Teacher Certification: Equipping Teachers to Prepare Proficient Readers

    Science.gov (United States)

    Rowland, Julie

    2015-01-01

    Ensuring that students are reading proficiently by third grade is a key component of keeping students on track to graduate high school and pursue college and careers. Because of the magnitude of this academic milestone, states typically pursue policies that promote early identification and intervention for struggling readers. However, teachers are…

  2. Statistical analysis of nematode counts from interlaboratory proficiency tests

    NARCIS (Netherlands)

    Berg, van den W.; Hartsema, O.; Nijs, Den J.M.F.

    2014-01-01

    A series of proficiency tests on potato cyst nematode (PCN; n=29) and free-living stages of Meloidogyne and Pratylenchus (n=23) were investigated to determine the accuracy and precision of the nematode counts and to gain insights into possible trends and potential improvements. In each test, each

  3. A retrospective evaluation of proficiency testing, and rapid HIV test ...

    African Journals Online (AJOL)

    Background: Proficiency testing (PT) has been implemented as a form of External Quality Assurance (EQA) by the National HIV Reference Laboratory in Kenya since 2007 in order to monitor and improve on the quality of HIV testing and counselling HTC services. Objective: To compare concordance between National HIV ...

  4. Predicting Lexical Proficiency in Language Learner Texts Using Computational Indices

    Science.gov (United States)

    Crossley, Scott A.; Salsbury, Tom; McNamara, Danielle S.; Jarvis, Scott

    2011-01-01

    The authors present a model of lexical proficiency based on lexical indices related to vocabulary size, depth of lexical knowledge, and accessibility to core lexical items. The lexical indices used in this study come from the computational tool Coh-Metrix and include word length scores, lexical diversity values, word frequency counts, hypernymy…

  5. High school science teacher perceptions of the science proficiency testing as mandated by the State of Ohio Board of Education

    Science.gov (United States)

    Jeffery, Samuel Shird

    There is a correlation between the socioeconomic status of secondary schools and scores on the State of Ohio's mandated secondary science proficiency tests. In low scoring schools many reasons effectively explain the low test scores as a result of the low socioeconomics. For example, one reason may be that many students are working late hours after school to help with family finances; parents may simply be too busy providing family income to realize the consequences of the testing program. There are many other personal issues students face that may cause them to score poorly an the test. The perceptions of their teachers regarding the science proficiency test program may be one significant factor. These teacher perceptions are the topic of this study. Two sample groups ware established for this study. One group was science teachers from secondary schools scoring 85% or higher on the 12th grade proficiency test in the academic year 1998--1999. The other group consisted of science teachers from secondary schools scoring 35% or less in the same academic year. Each group of teachers responded to a survey instrument that listed several items used to determine teachers' perceptions of the secondary science proficiency test. A significant difference in the teacher' perceptions existed between the two groups. Some of the ranked items on the form include teachers' opinions of: (1) Teaching to the tests; (2) School administrators' priority placed on improving average test scores; (3) Teacher incentive for improving average test scores; (4) Teacher teaching style change as a result of the testing mandate; (5) Teacher knowledge of State curriculum model; (6) Student stress as a result of the high-stakes test; (7) Test cultural bias; (8) The tests in general.

  6. 76 FR 66318 - Announcement of Funding Awards; Limited English Proficiency Initiative Program (LEPI), Fiscal...

    Science.gov (United States)

    2011-10-26

    ... limited English proficiency (LEP), and develop and implement a system to provide those services so LEP... Awards; Limited English Proficiency Initiative Program (LEPI), Fiscal Year 2010/2011 AGENCY: Office of... (NOFA) for the Limited English Proficiency Initiative (LEPI) Program for Fiscal Year (FY) 2010/2011...

  7. Measures for Determining English Language Proficiency and the Resulting Implications for Instructional Provision and Intervention

    Science.gov (United States)

    Albers, Craig A.; Kenyon, Dorry M.; Boals, Timothy J.

    2009-01-01

    Although numerous English language proficiency (ELP) measures currently exist, many were developed prior to the No Child Left Behind Act of 2001 (NCLB). These pre-NCLB measures typically focused on social language proficiency, whereas post-NCLB measures are linked to ELP standards and focus on academic language proficiency (ALP). ELP measures are…

  8. Recent advances in ratio primary reference measurement procedures (definitive methods) and their use in certification of reference materials and controlling assigned values in proficiency testing

    International Nuclear Information System (INIS)

    Dybczynski, R.S.; Polkowska-Motrenko, H.; Chajduk, E.; Danko, B.; Pyszynska, M.

    2014-01-01

    Three very accurate (definitive) methods by RNAA for the determination of Se, As and Fe respectively, which were recently elaborated in our laboratory, are reviewed and their use in certification of reference materials and in checking the assigned values in proficiency tests is demonstrated on several examples. According to VIM 3 nomenclature these methods may be called: ratio primary reference measurement procedures (RPRMPs). RPRMPs with their expanded uncertainties of 2.7-3.6 % are comparable to ID-MS methods and are the only methods of such high metrological quality which can be used for the determination of trace amounts of monoisotopic elements. (author)

  9. Role of recent research in improving check valve reliability at nuclear power plants

    International Nuclear Information System (INIS)

    Kalsi, M.S.; Horst, C.L.; Wang, J.K.; Sharma, V.

    1990-01-01

    Check valve failures at nuclear power plants in recent years have led to serious safety concerns, and caused extensive damage to other plant components which had a significant impact on plant availability. In order to understand the failure mechanism and improve the reliability of check valves, a systematic research effort was proposed by Kalsi Engineering, Inc. to U.S. Nuclear Regulatory Commission (NRC). The overall goal of the research was to develop models for predicting the performance and degradation of swing check valves in nuclear power plant systems so that appropriate preventive maintenance or design modifications can be performed to improve the reliability of check valves. Under Phase I of this research, a large matrix of tests was run with instrumented swing check valves to determine the stability of the disc under a variety of upstream flow disturbances, covering a wide range of disc stop positions and flow velocities in two different valve sizes. The goals of Phase II research were to develop predictive models which quantify the anticipated degradation of swing check valves that have flow disturbances closely upstream of the valve and are operating under flow velocities that do not result in full disc opening. This research allows the inspection/maintenance activities to be focussed on those check valves that are more likely to suffer premature degradation. The quantitative wear and fatigue prediction methodology can be used to develop a sound preventive maintenance program. The results of the research also show the improvements in check valve performance/reliability that can be achieved by certain modifications in the valve design

  10. Study of check image using computed radiography

    International Nuclear Information System (INIS)

    Sato, Hiroshi

    2002-01-01

    There are two image forming methods both a check image and a portal image in the linacogram. It has been established the image forming method in the check image using computed radiography (CR). On the other hand, it is not established the image forming method in the portal image using CR yet. Usually, in the electric portal imaging device (EPID) is mainly used just before radiotherapy start. The usefulness of the portal image forming method by CR using in place of EPID is possible to confirm the precision for determining to specific position at the irradiate part and to the irradiate method for the human organs. There are some technical problems that, since in the early time, the linac graphy (LG) image have low resolution power. In order to improve to the resolution power in LG image, CR image technologies have been introduced to the check image forming method. Heavy metallic sheet (HMS) is used to the front side of CR-IP cassette, and high contactness sponge is used to the back side of the cassette. Improved contactness between HMS and imaging plate (IP) by means of the high contactness sponge contributed to improve the resolution power in the check images. A lot of paper which is connected with these information have been reported. Imaging plate ST-III should be used to maintain high sensitivity in the check film image forming method. The same image forming method in the check image established by CR has been introduced into the portal image forming method in order to improve the resolution power. However, as a result, it couldn't acquired high resolution image forming in the portal images because of the combination of ST-III and radiotherapy dose. After several trials, it has been recognized that HR-V imaging plate for mammography is the most useful application to maintain high resolution power in the portal images. Also, it is possible to modify the image quality by changing GS parameter which is one of image processing parameters in CR. Furthermore, in case

  11. Proficiency training on a virtual reality robotic surgical skills curriculum.

    Science.gov (United States)

    Bric, Justin; Connolly, Michael; Kastenmeier, Andrew; Goldblatt, Matthew; Gould, Jon C

    2014-12-01

    The clinical application of robotic surgery is increasing. The skills necessary to perform robotic surgery are unique from those required in open and laparoscopic surgery. A validated laparoscopic surgical skills curriculum (Fundamentals of Laparoscopic Surgery or FLS™) has transformed the way surgeons acquire laparoscopic skills. There is a need for a similar skills training and assessment tool for robotic surgery. Our research group previously developed and validated a robotic training curriculum in a virtual reality (VR) simulator. We hypothesized that novice robotic surgeons could achieve proficiency levels defined by more experienced robotic surgeons on the VR robotic curriculum, and that this would result in improved performance on the actual daVinci Surgical System™. 25 medical students with no prior robotic surgery experience were recruited. Prior to VR training, subjects performed 2 FLS tasks 3 times each (Peg Transfer, Intracorporeal Knot Tying) using the daVinci Surgical System™ docked to a video trainer box. Task performance for the FLS tasks was scored objectively. Subjects then practiced on the VR simulator (daVinci Skills Simulator) until proficiency levels on all 5 tasks were achieved before completing a post-training assessment of the 2 FLS tasks on the daVinci Surgical System™ in the video trainer box. All subjects to complete the study (1 dropped out) reached proficiency levels on all VR tasks in an average of 71 (± 21.7) attempts, accumulating 164.3 (± 55.7) minutes of console training time. There was a significant improvement in performance on the robotic FLS tasks following completion of the VR training curriculum. Novice robotic surgeons are able to attain proficiency levels on a VR simulator. This leads to improved performance in the daVinci surgical platform on simulated tasks. Training to proficiency on a VR robotic surgery simulator is an efficient and viable method for acquiring robotic surgical skills.

  12. Summary of microsatellite instability test results from laboratories participating in proficiency surveys: proficiency survey results from 2005 to 2012.

    Science.gov (United States)

    Boyle, Theresa A; Bridge, Julia A; Sabatini, Linda M; Nowak, Jan A; Vasalos, Patricia; Jennings, Lawrence J; Halling, Kevin C

    2014-03-01

    The College of American Pathologists surveys are the largest laboratory peer comparison programs in the world. These programs allow laboratories to regularly evaluate their performance and improve the accuracy of the patient test results they provide. Proficiency testing is offered twice a year to laboratories performing microsatellite instability testing. These surveys are designed to emulate clinical practice, and some surveys have more challenging cases to encourage the refinement of laboratory practices. This report summarizes the results and trends in microsatellite instability proficiency testing from participating laboratories from the inception of the program in 2005 through 2012. We compiled and analyzed data for 16 surveys of microsatellite instability proficiency testing during 2005 to 2012. The number of laboratories participating in the microsatellite instability survey has more than doubled from 42 to 104 during the 8 years analyzed. An average of 95.4% of the laboratories correctly classified each of the survey test samples from the 2005A through 2012B proficiency challenges. In the 2011B survey, a lower percentage of laboratories (78.4%) correctly classified the specimen, possibly because of overlooking subtle changes of microsatellite instability and/or failing to enrich the tumor content of the specimen to meet the limit of detection of their assay. In general, laboratories performed well in microsatellite instability testing. This testing will continue to be important in screening patients with colorectal and other cancers for Lynch syndrome and guiding the management of patients with sporadic colorectal cancer.

  13. Instrumental Capital

    Directory of Open Access Journals (Sweden)

    Gabriel Valerio

    2007-07-01

    Full Text Available During the history of human kind, since our first ancestors, tools have represented a mean to reach objectives which might otherwise seemed impossibles. In the called New Economy, where tangibles assets appear to be losing the role as the core element to produce value versus knowledge, tools have kept aside man in his dairy work. In this article, the author's objective is to describe, in a simple manner, the importance of managing the organization's group of tools or instruments (Instrumental Capital. The characteristic conditions of this New Economy, the way Knowledge Management deals with these new conditions and the sub-processes that provide support to the management of Instrumental Capital are described.

  14. Model Checking the Remote Agent Planner

    Science.gov (United States)

    Khatib, Lina; Muscettola, Nicola; Havelund, Klaus; Norvig, Peter (Technical Monitor)

    2001-01-01

    This work tackles the problem of using Model Checking for the purpose of verifying the HSTS (Scheduling Testbed System) planning system. HSTS is the planner and scheduler of the remote agent autonomous control system deployed in Deep Space One (DS1). Model Checking allows for the verification of domain models as well as planning entries. We have chosen the real-time model checker UPPAAL for this work. We start by motivating our work in the introduction. Then we give a brief description of HSTS and UPPAAL. After that, we give a sketch for the mapping of HSTS models into UPPAAL and we present samples of plan model properties one may want to verify.

  15. Perencanaan Check Damsungai Lebugini Kabupatenkudus, Jawa Tengah

    OpenAIRE

    Amirullah, Fikri; Nalendro, Raditya; Wahyuni, Sri Eko; Salamun, Salamun

    2014-01-01

    Lebugini River is the branch of Juanariverswhich is under the authority of the Central River Region Pemali - Juana, precisely located in the administrative area of the Kudus District. The location, which is on the upstream,causes degradation of the river channel, thus, to stabilize the river channel, the local Goverment should have a plan to build the conservation building. The dataused for the planning of check dam areprimary data (geotechnical data, the geometry of Lebugini river, and also ...

  16. Perencanaan Check Dam Sungai Dawe Kudus

    OpenAIRE

    Mustaanah, Adibatul; Pinandoyo, Nur; Sugiyanto, Sugiyanto; Wahyuni, Sri Eko

    2013-01-01

    Juana river's located in two administrative regions Kudus and Pati had superficial. This is because the slope of the river is quite gentle and the level of environmental degradation in the watershed (DAS) Juana river's have increased. Based on these conditions, it is necessary to plan the construction of sediment control (check dams) to reduce sedimentation along the river and optimize the function of the Juana river's. Planning is performed on Dawe river's ,the branch of Juana river's. From ...

  17. Implementing a Self- Checking PROFIBUS Slave

    OpenAIRE

    Krug, Margrit R.; Lubaszewski, Marcelo S.; Ferreira, Jose M.; Alves, Gustavo R.

    2000-01-01

    This work presents the study and preliminary results of the high level implementation of a self-checking Profibus slave. From an existing VHDL description of the device, a test strategy was studied and implemented, so that the whole circuit has embedded test structures capable to perform at-speed test of the slave. In this paper, we show the used test strategies and implementation results achieved from a synthesis process in a FPGA environment. info:eu-repo/semantics/publishedVersion

  18. checkCIF/PLATON report Datablock: platon

    Indian Academy of Sciences (India)

    checkCIF/PLATON report. Structure factors have been supplied for datablock(s) platon. No syntax errors found. CIF dictionary Interpreting this report. Datablock: platon. Bond precision: C-C = 0.0033 A. Wavelength=0.71073. Cell: a=16.345(7) b=6.288(3) c=19.938(8) alpha=90 beta=96.169(7) gamma=90. Temperature:.

  19. Photogrammetric approach to automated checking of DTMs

    DEFF Research Database (Denmark)

    Potucková, Marketa

    2005-01-01

    Geometrically accurate digital terrain models (DTMs) are essential for orthoimage production and many other applications. Collecting reference data or visual inspection are reliable but time consuming and therefore expensive methods for finding errors in DTMs. In this paper, a photogrammetric...... approach to automated checking and improving of DTMs is evaluated. Corresponding points in two overlapping orthoimages are found by means of area based matching. Provided the image orientation is correct, discovered displacements correspond to DTM errors. Improvements of the method regarding its...

  20. Speed checks on the CERN site

    CERN Multimedia

    2007-01-01

    In view of the significant number of speeding incidents that have been reported, CERN will shortly start to carry out speed checks on the site. The radar used for this purpose will show drivers the speed measured. The disciplinary measures taken against those exceeding the authorised limit (generally 50 k.p.h.) will include a ban from driving on the site for a minimum of one month. Maximilian Metzger
Secretary-General

  1. Application of 125I in micropipettor check

    International Nuclear Information System (INIS)

    Qian Xiaoyu; Gao Yunchao; Yang Yadong; Lu Hankui

    2006-01-01

    Gravimetric test is one of authoritative methods for the measurement and validation of the accuracy and precision of micropipettors. The feasibility of radioactive measurement in the check of micropipettors is studied. There are no significant difference in radioactive count rates of 125 I aspirated between 2 qualified micropipettors, but significant difference are recorded between qualified and unqualified micropipettors. So 125 I radiometry agrees with gravimetric tests, and can be used as a laboratory constant test of micropipettors. (authors)

  2. Delivery quality assurance with ArcCHECK

    International Nuclear Information System (INIS)

    Neilson, Christopher; Klein, Michael; Barnett, Rob; Yartsev, Slav

    2013-01-01

    Radiation therapy requires delivery quality assurance (DQA) to ensure that treatment is accurate and closely follows the plan. We report our experience with the ArcCHECK phantom and investigate its potential optimization for the DQA process. One-hundred seventy DQA plans from 84 patients were studied. Plans were classified into 2 groups: those with the target situated on the diodes of the ArcCHECK (D plans) and those with the target situated at the center (C plans). Gamma pass rates for 8 target sites were examined. The parameters used to analyze the data included 3%/3 mm with the Van Dyk percent difference criteria (VD) on, 3%/3 mm with the VD off, 2%/2 mm with the VD on, and x/3 mm with the VD on and the percentage dosimetric agreement “x” for diode plans adjusted. D plans typically displayed maximum planned dose (MPD) on the cylindrical surface containing ArcCHECK diodes than center plans, resulting in inflated gamma pass rates. When this was taken into account by adjusting the percentage dosimetric agreement, C plans outperformed D plans by an average of 3.5%. ArcCHECK can streamline the DQA process, consuming less time and resources than radiographic films. It is unnecessary to generate 2 DQA plans for each patient; a single center plan will suffice. Six of 8 target sites consistently displayed pass rates well within our acceptance criteria; the lesser performance of head and neck and spinal sites can be attributed to marginally lower doses and increased high gradient of plans

  3. Innovative instrumentation

    International Nuclear Information System (INIS)

    Anon.

    1983-01-01

    At this year's particle physics conference at Brighton, a parallel session was given over to instrumentation and detector development. While this work is vital to the health of research and its continued progress, its share of prime international conference time is limited. Instrumentation can be innovative three times — first when a new idea is outlined, secondly when it is shown to be feasible, and finally when it becomes productive in a real experiment, amassing useful data rather than operational experience. Hyams' examples showed that it can take a long time for a new idea to filter through these successive stages, if it ever makes it at all

  4. Innovative instrumentation

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1983-11-15

    At this year's particle physics conference at Brighton, a parallel session was given over to instrumentation and detector development. While this work is vital to the health of research and its continued progress, its share of prime international conference time is limited. Instrumentation can be innovative three times — first when a new idea is outlined, secondly when it is shown to be feasible, and finally when it becomes productive in a real experiment, amassing useful data rather than operational experience. Hyams' examples showed that it can take a long time for a new idea to filter through these successive stages, if it ever makes it at all.

  5. Instrumental aspects

    Directory of Open Access Journals (Sweden)

    Qureshi Navid

    2017-01-01

    Full Text Available Every neutron scattering experiment requires the choice of a suited neutron diffractometer (or spectrometer in the case of inelastic scattering with its optimal configuration in order to accomplish the experimental tasks in the most successful way. Most generally, the compromise between the incident neutron flux and the instrumental resolution has to be considered, which is depending on a number of optical devices which are positioned in the neutron beam path. In this chapter the basic instrumental principles of neutron diffraction will be explained. Examples of different types of experiments and their respective expectable results will be shown. Furthermore, the production and use of polarized neutrons will be stressed.

  6. Solution assay instrument operations manual

    International Nuclear Information System (INIS)

    Li, T.K.; Marks, T.; Parker, J.L.

    1983-09-01

    An at-line solution assay instrument (SAI) has been developed and installed in a plutonium purification and americium recovery process area in the Los Alamos Plutonium Processing Facility. The instrument was designed for accurate, timely, and simultaneous nondestructive analysis of plutonium and americium in process solutions that have a wide range of concentrations and americium/plutonium ratios and for routine operation by process technicians who lack instrumentation background. The SAI, based on transmission-corrected, high-resolution gamma-ray spectroscopy, has two measurement stations attached to a single multichannel analyzer/computer system. To ensure the quality of assay results, the SAI has an internal measurement control program, which requires daily and weekly check runs and monitors key aspects of all assay runs. For a 25-ml sample, the assay precision is 5 g/l within a 2000-s count time

  7. Radiation systems for luggage and parcel checks

    International Nuclear Information System (INIS)

    Honomichl, V.

    1989-01-01

    The current radioscopic systems of luggage check in air traffic are based on the principle of intensifying the brightness of half-tone images on the fluorescent screen of an image intensifier, or use of very sensitive pick-up tubes with digital image processing. Computers are used for signal processing and the image is produced on a display unit. Sources of continuous or pulse X-ray radiation are used. The signals from the detector are amplified, converted and stored in a buffer and then displayed. The scanning systems use a narrow beam or, to improve rapidity and sensitivity of scanning, a sector beam of radiation. Equipment is described from Heinemann (FRG) featuring a band of 576 or 768 detectors and microprocessor controlled semiconductor tv cameras. Characteristics are also presented of equipment from Aeradio Ltd (U.K.) and Philips (FRG) companies. Attention is devoted to equipment from American Science and Engineering (U.S.) showing high quality imaging even at low radiation doses. Briefly described are portable check systems for inspection of small luggage and parcels. Characteristics are presented of systems for checking vehicles and containers in naval, air, rail and road transport. The principles and performance are described of the systems. (J.B.). 4 figs

  8. The Activity Check of Brachytherapy Isotope

    International Nuclear Information System (INIS)

    Kim, Gun Oh; Lee, Byung Koo; Kwon, Young Ho

    2004-01-01

    An isotope Ir-192, which is used in brachytherapy depends on import in whole quantities. There are a few ways for its activity. measurement using Welltype chamber or the way to rely on authentic decay table of manufacturer. In-air dosimetry using Farmer Chamber, etc. In this paper, let me introduce the way using Farmer chamber which is easier and simple. With the Farmer chamber and source calibration jig, take a measurement the activity of an isotope Ir-192 and compare the value with the value from decay table of manufacturer and check the activity of source. The result of measurement, compared the value from decay table, by ±2.1. (which belongs to recommendable value for AAPM ±5% as difference of error range). It is possible to use on clinical medicine. With the increase in use of brachytherapy, the increase of import is essential. And an accurate activity check of source is compulsory. For the activity check of source, it was possible to use Farmer chamber and source calibration jig without additional purchase of Well type chamber.

  9. [Pre-verbality in focusing and the need for self check. An attempt at "focusing check"].

    Science.gov (United States)

    Masui, T; Ikemi, A; Murayama, S

    1983-06-01

    Though the Focusing process is not entirely non-verbal, in Focusing, careful attention is paid by the Focuser and the Listener to the pre-verbal experiential process. In other words, Focusing involves attending to the felt sense that is not easily expressed in words immediately. Hence, during the process of learning to Focus, the Focusing teacher attempts to communicate the experiences of Focusing to the student which are not easily done by words. Due to such difficulties, the Focusing student may (and quite frequently does) mistake the experiential process in Focusing with other processes. Often, the felt sense can be confused with other phenomena such as "autogenic discharge". Also the Focuser may not stay with the felt sense and drift into "free association" or frequently, certain processes in "meditation" can be confused with Focusing. Therefore, there is a need for a "check" by which the Focusing student can confirm the Focusing experience for himself. For the Focusing student, such a "check" serves not only to confirm the Focusing process, but also an aid to learning Focusing. We will report here a "Focusing Check" which we developed by translating Eugene Gendlin's "Focusing Check" and making several modifications in it so that it will be more understandable to the Japanese. Along with the "Focusing Check" we developed, the authors discuss the need for such a check.

  10. Occupational health and safety experiences among self-identified immigrant workers living or working in Somerville, MA by ethnicity, years in the US, and English proficiency.

    Science.gov (United States)

    Panikkar, Bindu; Woodin, Mark A; Brugge, Doug; Desmarais, Anne Marie; Hyatt, Raymond; Goldman, Rose; Pirie, Alex; Goldstein-Gelb, Marcy; Galvão, Heloisa; Chianelli, Monica; Vasquez, Ismael; McWhinney, Melissa; Dalembert, Franklin; Gute, David M

    2012-12-06

    In this community based research initiative, we employed a survey instrument predominately developed and administered by Teen Educators to assess occupational health risks for Haitian, Salvadoran, and Brazilian immigrants (n = 405) in Somerville, MA, USA. We demonstrate that a combined analysis of ethnicity, years in the US, and English proficiency better characterized the occupational experience of immigrant workers than considering these variables individually. While years in the US (negatively) and English proficiency (positively) explained the occurrence of health risks, the country of origin identified the most vulnerable populations in the community. Brazilians, Salvadorans, and other Hispanic, all of whom who have been in the US varying length of time, with varying proficiency in English language had twice the odds of reporting injuries due to work compared to other immigrants. Although this observation was not significant it indicates that years in the US and English proficiency alone do not predict health risks among this population. We recommend the initiation of larger studies employing c community based participatory research methods to confirm these differences and to further explore work and health issues of immigrant populations. This study is one of the small number of research efforts to utilize a contemporaneous assessment of occupational health problems in three distinct immigrant populations at the community level within a specific Environmental Justice context and social milieu.

  11. Occupational Health and Safety Experiences among Self-Identified Immigrant Workers Living or Working in Somerville, MA by Ethnicity, Years in the US, and English Proficiency

    Science.gov (United States)

    Panikkar, Bindu; Woodin, Mark A.; Brugge, Doug; Desmarais, Anne Marie; Hyatt, Raymond; Goldman, Rose; Pirie, Alex; Goldstein-Gelb, Marcy; Galvão, Heloisa; Chianelli, Monica; Vasquez, Ismael; McWhinney, Melissa; Dalembert, Franklin; Gute, David M.

    2012-01-01

    In this community based research initiative, we employed a survey instrument predominately developed and administered by Teen Educators to assess occupational health risks for Haitian, Salvadoran, and Brazilian immigrants (n = 405) in Somerville, MA, USA. We demonstrate that a combined analysis of ethnicity, years in the US, and English proficiency better characterized the occupational experience of immigrant workers than considering these variables individually. While years in the US (negatively) and English proficiency (positively) explained the occurrence of health risks, the country of origin identified the most vulnerable populations in the community. Brazilians, Salvadorans, and other Hispanic, all of whom who have been in the US varying length of time, with varying proficiency in English language had twice the odds of reporting injuries due to work compared to other immigrants. Although this observation was not significant it indicates that years in the US and English proficiency alone do not predict health risks among this population. We recommend the initiation of larger studies employing c community based participatory research methods to confirm these differences and to further explore work and health issues of immigrant populations. This study is one of the small number of research efforts to utilize a contemporaneous assessment of occupational health problems in three distinct immigrant populations at the community level within a specific Environmental Justice context and social milieu. PMID:23222180

  12. Surgical Instrument

    NARCIS (Netherlands)

    Dankelman, J.; Horeman, T.

    2009-01-01

    The present invention relates to a surgical instrument for minimall-invasive surgery, comprising a handle, a shaft and an actuating part, characterised by a gastight cover surrounding the shaft, wherein the cover is provided with a coupler that has a feed- through opening with a loskable seal,

  13. Weather Instruments.

    Science.gov (United States)

    Brantley, L. Reed, Sr.; Demanche, Edna L.; Klemm, E. Barbara; Kyselka, Will; Phillips, Edwin A.; Pottenger, Francis M.; Yamamoto, Karen N.; Young, Donald B.

    This booklet presents some activities to measure various weather phenomena. Directions for constructing a weather station are included. Instruments including rain gauges, thermometers, wind vanes, wind speed devices, humidity devices, barometers, atmospheric observations, a dustfall jar, sticky-tape can, detection of gases in the air, and pH of…

  14. The English Proficiency of the Academics of the Teacher Training and Education Institutions

    Directory of Open Access Journals (Sweden)

    Ali Saukah

    2016-02-01

    Full Text Available The study is aimed at describing the general English proficiency level of the academics of Teacher Training and Education Institutions (LPTK's as indicated by their TOEFL scores. Specifically, the study is focused on finding out whether there is any difference among the academics' English proficiencies when they are grouped in terms of the geographic regions of their institutions and their fields of study. This study is also intended to reveal any possible relationship between the academics' English proficiency and their age. The results indicate that the English proficiency of the academics on the average is far below the average of that of the international students. The academics in West Java are the highest in their English proficiency, and the English group, as expected, has the best English proficiency. In addition, there is a negative correlation between English proficiency and age

  15. A study of production of radioactive environmental reference materials used for proficiency testing program in Taiwan

    International Nuclear Information System (INIS)

    Peng, En-Chi; Wang, Jeng-Jong

    2013-01-01

    To realise radioactive environmental reference materials in Taiwan, seven environmental materials of soil, water, vegetation, meat, airborne particles (filter paper), milk and mushroom samples that are frequently encountered were used to establish the preparation of the reference materials. These seven environmental materials were collected, checked for freedom from radioactivity and prepared according to their properties. The preparation was carried out by using activity about 10–100 times that of the minimum detectable activity (MDA) in routine measurements in the radioactive standard used to spike the inactive material and this standard is traceable to national ionising radioactivity standards (TAF, 2004). To demonstrate sample traceability to the added standard, each sample was carefully measured and its uncertainty evaluated. Based on the recommendations of ISO Guide 35 for evaluation of reference materials and with the above assessment and verification procedures, the uncertainties (k=1) of the spike activity used in making reference materials were: 60 Co≤4.6%, 134 Cs≤4.7%, 137 Cs≤5.0%, total β≤0.6% and 3 H≤1.3%. - Highlights: • Seven kinds environmental materials were used to establish the production of the RMs. • Spiking the traceable standard radioactive source to the blank substance. • Each sample was carefully evaluated for its uncertainty. • The performance of the RMs was estimated with the Proficiency Testing program report. • The ability of the environment RMs in the configuration is quite good

  16. First Language Proficiency and Successful Foreign Language Learning: The Case of High School Students Learning French as a Foreign Language

    Science.gov (United States)

    Gnintedem, Antoine

    2014-01-01

    This study investigated whether there was a correlation between first language proficiency as measured by the Mississippi Curriculum Test (MCT II) Reading and Language Arts and foreign language proficiency as measured by the French Language Proficiency Test. Data for the independent variable, first language proficiency, was collected from the…

  17. Model checking methodology for large systems, faults and asynchronous behaviour. SARANA 2011 work report

    International Nuclear Information System (INIS)

    Lahtinen, J.; Launiainen, T.; Heljanko, K.; Ropponen, J.

    2012-01-01

    Digital instrumentation and control (I and C) systems are challenging to verify. They enable complicated control functions, and the state spaces of the models easily become too large for comprehensive verification through traditional methods. Model checking is a formal method that can be used for system verification. A number of efficient model checking systems are available that provide analysis tools to determine automatically whether a given state machine model satisfies the desired safety properties. This report reviews the work performed in the Safety Evaluation and Reliability Analysis of Nuclear Automation (SARANA) project in 2011 regarding model checking. We have developed new, more exact modelling methods that are able to capture the behaviour of a system more realistically. In particular, we have developed more detailed fault models depicting the hardware configuration of a system, and methodology to model function-block-based systems asynchronously. In order to improve the usability of our model checking methods, we have developed an algorithm for model checking large modular systems. The algorithm can be used to verify properties of a model that could otherwise not be verified in a straightforward manner. (orig.)

  18. Model checking methodology for large systems, faults and asynchronous behaviour. SARANA 2011 work report

    Energy Technology Data Exchange (ETDEWEB)

    Lahtinen, J. [VTT Technical Research Centre of Finland, Espoo (Finland); Launiainen, T.; Heljanko, K.; Ropponen, J. [Aalto Univ., Espoo (Finland). Dept. of Information and Computer Science

    2012-07-01

    Digital instrumentation and control (I and C) systems are challenging to verify. They enable complicated control functions, and the state spaces of the models easily become too large for comprehensive verification through traditional methods. Model checking is a formal method that can be used for system verification. A number of efficient model checking systems are available that provide analysis tools to determine automatically whether a given state machine model satisfies the desired safety properties. This report reviews the work performed in the Safety Evaluation and Reliability Analysis of Nuclear Automation (SARANA) project in 2011 regarding model checking. We have developed new, more exact modelling methods that are able to capture the behaviour of a system more realistically. In particular, we have developed more detailed fault models depicting the hardware configuration of a system, and methodology to model function-block-based systems asynchronously. In order to improve the usability of our model checking methods, we have developed an algorithm for model checking large modular systems. The algorithm can be used to verify properties of a model that could otherwise not be verified in a straightforward manner. (orig.)

  19. Nordic proficiency test for whole body counting facilities

    Energy Technology Data Exchange (ETDEWEB)

    del Risco Norrlid, L. (Swedish Radiation Safety Authority (Sweden)); Halldorsson, O. (Icelandic Radiation Safety Authority, GR (Iceland)); Holm, S. (Copenhagen Univ. Hospital. NM and PET (Denmark)); Huikari, J. (Radiation and Nuclear Safety Authority (Finland)); Isaksson, M. (Goeteborg Univ., Dep. Radiation Physics Sahlgren Academy (Sweden)); Lind, B. (Norwegian Radiation Protection Authority (Norway))

    2012-01-15

    The PIANOLIB activity aims to harmonize the calibrations of the measurement equipment in the region and to evaluate the quality of this kind of measurement by means of a proficiency test exercise. In this report the results of the proficiency test are presented. The exercise consisted in determining the activity of a phantom filled with two sets of certified radioactive materials, K-40 and Cs-137, in radioactive rods, uniformly spaced inside of the phantom. Most of the participants were able to quantify correctly the activities of K-40 and Cs-137 and by comparison with the results of a previous exercise of this kind, the overall performance is equally good. The problems experienced by laboratories which submitted non-acceptable results could generally be attributed to the calibration of their systems. It is important to keep the practice of intercomparison and NKS continues to be the best framework for supporting this kind of activity. (Author)

  20. Language proficiency and health status: are bilingual immigrants healthier?

    Science.gov (United States)

    Schachter, Ariela; Kimbro, Rachel T; Gorman, Bridget K

    2012-03-01

    Bilingual immigrants appear to have a health advantage, and identifying the mechanisms responsible for this is of increasing interest to scholars and policy makers in the United States. Utilizing the National Latino and Asian American Study (NLAAS; n = 3,264), we investigate the associations between English and native-language proficiency and usage and self-rated health for Asian and Latino U.S. immigrants from China, the Philippines, Vietnam, Mexico, Cuba, and Puerto Rico. The findings demonstrate that across immigrant ethnic groups, being bilingual is associated with better self-rated physical and mental health relative to being proficient in only English or only a native language, and moreover, these associations are partially mediated by socioeconomic status and family support but not by acculturation, stress and discrimination, or health access and behaviors.

  1. Linguistic Proficiency and Strategies on Reading Performance in English

    Directory of Open Access Journals (Sweden)

    Seyed Hassan Talebi

    2015-01-01

    Full Text Available General English (L2 proficiency and reading strategies are believed to be highly effective in successful reading performance. However, available studies rarely investigated the combined effects of these two variables on successful reading. To fill this gap, 78 university students were divided into four groups of different degrees of these two variables in L2 and given a reading test in English and an interview for assessing how much of the problems in L2 reading among the four groups were rooted in linguistic competence and/or strategic competence. Findings evinced that the high general proficiency level coupled with high awareness and use of reading strategies would result in best performance and that the pattern of answers to different components of reading question is different in different groups. It is concluded that both of the variables should be emphasized simultaneously for the best performance in reading comprehension.

  2. Fluctuation analysis of proficient and dysgraphic handwriting in children

    Science.gov (United States)

    Rosenblum, S.; Roman, H. E.

    2009-03-01

    We analyze handwriting records from several school children with the aim of characterizing the fluctuating behavior of the writing speed. It will be concluded that remarkable differences exist between proficient and dysgraphic handwritings which were unknown so far. It is shown that in the case of proficient handwriting, the variations in handwriting speed are strongly autocorrelated within times corresponding to the completion of a single character or letter, while become uncorrelated at longer times. In the case of dysgraphia, such correlations persist on longer time scales and the autocorrelation function seems to display algebraic time decay, indicating the presence of strong anomalies in the handwriting process. Applications of the results in educational/clinical programs are envisaged.

  3. Radon Measurement Proficiency (RMP) Program methods and devices

    International Nuclear Information System (INIS)

    Harrison, J.; Hoornbeek, J.; Jalbert, P.; Sensintaffar, E.; Hopper, R.

    1991-01-01

    The US EPA developed the voluntary Radon Measurement Proficiency Program in 1986 in response to a Federal and State need for measurement services firms to demonstrate their proficiency with radon measurement methods and devices. Since that time, the program has set basic standards for the radon measurement industry. The program has grown dramatically since its inception. In 1986, fewer than 50 companies participated in the program. By 1989, more than 5,000 companies were participating. Participants represent firms with an analytical capability as well as firms that rely upon another firm for analysis service. Since the beginning of the RMP Program, the Agency has learned a great deal about radon measurement methods and devices. This paper reviews the measurement devices used in the program and what the EPA has learned about them since the program's inception. Performance data from the RMP Program are used to highlight relevant findings

  4. Nuclear instrumentation

    International Nuclear Information System (INIS)

    Weill, Jacky; Fabre, Rene.

    1981-01-01

    This article sums up the Research and Development effort at present being carried out in the five following fields of applications: Health physics and Radioprospection, Control of nuclear reactors, Plant control (preparation and reprocessing of the fuel, testing of nuclear substances, etc.), Research laboratory instrumentation, Detectors. It also sets the place of French industrial activities by means of an estimate of the French market, production and flow of trading with other countries [fr

  5. Divided Instruments

    Science.gov (United States)

    Chapman, A.; Murdin, P.

    2000-11-01

    Although the division of the zodiac into 360° probably derives from Egypt or Assyria around 2000 BC, there is no surviving evidence of Mesopotamian cultures embodying this division into a mathematical instrument. Almost certainly, however, it was from Babylonia that the Greek geometers learned of the 360° circle, and by c. 80 BC they had incorporated it into that remarkably elaborate device gener...

  6. Instrumentation development

    International Nuclear Information System (INIS)

    Anon.

    1976-01-01

    Areas being investigated for instrumentation improvement during low-level pollution monitoring include laser opto-acoustic spectroscopy, x-ray fluorescence spectroscopy, optical fluorescence spectroscopy, liquid crystal gas detectors, advanced forms of atomic absorption spectroscopy, electro-analytical chemistry, and mass spectroscopy. Emphasis is also directed toward development of physical methods, as opposed to conventional chemical analysis techniques for monitoring these trace amounts of pollution related to energy development and utilization

  7. Proficiency Testing Activities of Frequency Calibration Laboratories in Taiwan, 2009

    Science.gov (United States)

    2009-11-01

    cht.com.tw Abstract In order to meet the requirements of ISO 17025 and the demand of TAF (Taiwan Accreditation Foundation) for calibration inter... IEC 17025 General requirements for the competence of testing and calibration laboratories. The proficiency testing results are then important...on-site evaluation, an assessment team is organized to examine the technical competence of the labs and their compliance with the requirements of ISO

  8. Does childhood motor skill proficiency predict adolescent fitness?

    Science.gov (United States)

    Barnett, Lisa M; Van Beurden, Eric; Morgan, Philip J; Brooks, Lyndon O; Beard, John R

    2008-12-01

    To determine whether childhood fundamental motor skill proficiency predicts subsequent adolescent cardiorespiratory fitness. In 2000, children's proficiency in a battery of skills was assessed as part of an elementary school-based intervention. Participants were followed up during 2006/2007 as part of the Physical Activity and Skills Study, and cardiorespiratory fitness was measured using the Multistage Fitness Test. Linear regression was used to examine the relationship between childhood fundamental motor skill proficiency and adolescent cardiorespiratory fitness controlling for gender. Composite object control (kick, catch, throw) and locomotor skill (hop, side gallop, vertical jump) were constructed for analysis. A separate linear regression examined the ability of the sprint run to predict cardiorespiratory fitness. Of the 928 original intervention participants, 481 were in 28 schools, 276 (57%) of whom were assessed. Two hundred and forty-four students (88.4%) completed the fitness test. One hundred and twenty-seven were females (52.1%), 60.1% of whom were in grade 10 and 39.0% were in grade 11. As children, almost all 244 completed each motor assessments, except for the sprint run (n = 154, 55.8%). The mean composite skill score in 2000 was 17.7 (SD 5.1). In 2006/2007, the mean number of laps on the Multistage Fitness Test was 50.5 (SD 24.4). Object control proficiency in childhood, adjusting for gender (P = 0.000), was associated with adolescent cardiorespiratory fitness (P = 0.012), accounting for 26% of fitness variation. Children with good object control skills are more likely to become fit adolescents. Fundamental motor skill development in childhood may be an important component of interventions aiming to promote long-term fitness.

  9. Automata-Based CSL Model Checking

    DEFF Research Database (Denmark)

    Zhang, Lijun; Jansen, David N.; Nielson, Flemming

    2011-01-01

    For continuous-time Markov chains, the model-checking problem with respect to continuous-time stochastic logic (CSL) has been introduced and shown to be decidable by Aziz, Sanwal, Singhal and Brayton in 1996. The presented decision procedure, however, has exponential complexity. In this paper, we...... probability can then be approximated in polynomial time (using uniformization). This makes the present work the centerpiece of a broadly applicable full CSL model checker. Recently, the decision algorithm by Aziz et al. was shown to be incorrect in general. In fact, it works only for stratified CTMCs...

  10. Quantum anonymous voting with anonymity check

    International Nuclear Information System (INIS)

    Horoshko, Dmitri; Kilin, Sergei

    2011-01-01

    We propose a new protocol for quantum anonymous voting having serious advantages over the existing protocols: it protects both the voters from a curious tallyman and all the participants from a dishonest voter in unconditional way. The central idea of the protocol is that the ballots are given back to the voters after the voting process, which gives a possibility for two voters to check the anonymity of the vote counting process by preparing a special entangled state of two ballots. Any attempt of cheating from the side of the tallyman results in destroying the entanglement, which can be detected by the voters.

  11. Advanced techniques for efficient data integrity checking

    DEFF Research Database (Denmark)

    Martinenghi, Davide

    Integrity constraint checking, understood as the verification of data correctness and well-formedness conditions that must be satisfied in any state of a database, is not fully supported by current database technology. In a typical scenario, a database is required to comply with given semantic...... criteria (the integrity constraints) and to maintain the compliance each time data are updated. Since the introduction of the SQL2 standard, the SQL language started supporting assertions, which allow one to define general data consistency requirements expressing arbitrarily complex “business rules...

  12. A Framework for Online Conformance Checking

    DEFF Research Database (Denmark)

    Burattin, Andrea; Carmona, Josep

    2017-01-01

    is quantified after the completion of the process instance. In this paper we propose a framework for online conformance checking: not only do we quantify (non-)conformant behavior as the execution is running, we also restrict the computation to constant time complexity per event analyzed, thus enabling...... the online analysis of a stream of events. The framework is instantiated with ideas coming from the theory of regions, and state similarity. An implementation is available in ProM and promising results have been obtained....

  13. Optimal database locks for efficient integrity checking

    DEFF Research Database (Denmark)

    Martinenghi, Davide

    2004-01-01

    In concurrent database systems, correctness of update transactions refers to the equivalent effects of the execution schedule and some serial schedule over the same set of transactions. Integrity constraints add further semantic requirements to the correctness of the database states reached upon...... the execution of update transactions. Several methods for efficient integrity checking and enforcing exist. We show in this paper how to apply one such method to automatically extend update transactions with locks and simplified consistency tests on the locked entities. All schedules produced in this way...

  14. Instrumentation maintenance

    International Nuclear Information System (INIS)

    Mack, D.A.

    1976-09-01

    It is essential to any research activity that accurate and efficient measurements be made for the experimental parameters under consideration for each individual experiment or test. Satisfactory measurements in turn depend upon having the necessary instruments and the capability of ensuring that they are performing within their intended specifications. This latter requirement can only be achieved by providing an adequate maintenance facility, staffed with personnel competent to understand the problems associated with instrument adjustment and repair. The Instrument Repair Shop at the Lawrence Berkeley Laboratory is designed to achieve this end. The organization, staffing and operation of this system is discussed. Maintenance policy should be based on studies of (1) preventive vs. catastrophic maintenance, (2) records indicating when equipment should be replaced rather than repaired and (3) priorities established to indicate the order in which equipment should be repaired. Upon establishing a workable maintenance policy, the staff should be instructed so that they may provide appropriate scheduled preventive maintenance, calibration and corrective procedures, and emergency repairs. The education, training and experience of the maintenance staff is discussed along with the organization for an efficient operation. The layout of the various repair shops is described in the light of laboratory space and financial constraints

  15. Proficiency of virtual reality simulator training in flexible retrograde ureteroscopy renal stone management.

    Science.gov (United States)

    Cai, Jian-liang; Zhang, Yi; Sun, Guo-feng; Li, Ning-chen; Yuan, Xue-li; Na, Yan-qun

    2013-10-01

    Minimally invasive flexible ureteroscopy techniques have widely adopted in the management of patients with renal stones. We performed this study to investigate the value of virtual reality simulator training in retrograde flexible ureteroscopy renal stone treatment for catechumen. Thirty catechumen, included 17 attending physicians and 13 associate chief physicians, were selected for study. The trainees first underwent 1-hour basic training to get familiar with the instrument and basic procedures, then followed by 4-hour practice on virtual reality simulators. Before and after the 4-hour training, all trainees undertake an assessment with task 7 program (right low pole calyces stone management). We documented for each trainee the total time of procedure, time of progressing from the orifice to stone, stone translocation and fragmentation time, laser operate proficiency scale, total laser energy, maximal size of residual stone fragments, number of trauma from the scopes and tools, damage to the scope and global rating scale (GRS). The proficiency of this training program was analyzed by the comparison of the first and second assessment outcomes. Significant improvement was observed in retrograde flexible ureteroscopy management of renal stone on virtual reality simulators after finishing the 4 hour special-purpose training. This was demonstrated by improvement in total procedure time ((18.37±2.59) minutes vs. (38.67±1.94) minutes), progressing time from the orifice to stone ((4.00±1.08) minutes vs. (13.80±2.01) minutes), time of stone translocation ((1.80±0.71) minutes vs. (6.57±1.01) minutes), fragmentation time ((4.43±1.25) minutes vs. (13.53±1.46) minutes), laser operate proficiency scale (8.47±0.73 vs. 3.77±0.77), total laser energy ((3231.6±401.4) W vs. (5329.8±448.9) W), maximal size of residual stone fragments ((2.66±0.39) mm vs. (5.77±0.63) mm), number of trauma from the scopes and tools (3.27±1.01 vs. 10.37±3.02), damage to the scope (0 vs

  16. GE Fanuc推出Proficy Historian 3.0

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    GE基础设施旗下的GE Fanuc自动化美洲公司推出了全新的ProficyTM Historian版本3.0个全新的厂级数据历史库版本。ProficyTM Historian 3.0能采集、归档并发布所有的实时现场生产数据,使用起来非常方便,可用性很高。凭藉Proficy Historian,制造商可以有效地从多个数据源采集并聚合实时工厂数据。对于诸如因设备故障和产品质量存在问题而造成的非满意事件,它能快速找出根本原因以实现最佳绩效。

  17. Cell Phone Use and Child and Adolescent Reading Proficiency

    Science.gov (United States)

    Hofferth, Sandra L.; Moon, Ui Jeong

    2016-01-01

    This study examined the association between cell phone use, including minutes spent talking and number of text messages sent, and two measures of children’s reading proficiency — tests of word decoding and reading comprehension — in the United States. Data were drawn from the Child Development Supplement to the Panel Study of Income Dynamics, a nationally representative survey of 1,147 children 10–18 in 2009. Children whose parents were better educated, who had higher family incomes, who had fewer siblings, and who lived in urban areas were more likely to own or share a cell phone. Among those with access to a phone, children who spent more time talking on the phone were less proficient at word decoding, whereas children who spent more time sending text messages had greater reading comprehension. Although girls spent more time texting than did boys, there were no gender differences in the association between time spent talking or number of text messages sent with achievement. In spite of racial/ethnic differences in cell phone use levels, there were no racial/ethnic differences in the association between cell phone use and reading proficiency. PMID:27683624

  18. Non intrusive check valve diagnostics at Bruce A

    International Nuclear Information System (INIS)

    Marsch, S.P.

    1997-01-01

    Bruce A purchased non intrusive check valve diagnostic equipment in 1995 to ensure operability and availability of critical check valves in the Station. Diagnostics can be used to locate and monitor check valve degradation modes. Bruce A initiated a pilot program targeting check valves with flow through them and ones that completed open or close cycles. Approaches to determine how to confirm operability of passive check valves using non intrusive techniques were explored. A sample population of seventy-three check valves was selected to run the pilot program on prior to complete implementation. The pilot program produced some significant results and some inconclusive results. The program revealed a major finding that check valve performance modeling is required to ensure continuous operability of check valves. (author)

  19. Non intrusive check valve diagnostics at Bruce A

    Energy Technology Data Exchange (ETDEWEB)

    Marsch, S.P. [Ontario Hydro, Bruce Nuclear Generating Station A, Tiverton, ON (Canada)

    1997-07-01

    Bruce A purchased non intrusive check valve diagnostic equipment in 1995 to ensure operability and availability of critical check valves in the Station. Diagnostics can be used to locate and monitor check valve degradation modes. Bruce A initiated a pilot program targeting check valves with flow through them and ones that completed open or close cycles. Approaches to determine how to confirm operability of passive check valves using non intrusive techniques were explored. A sample population of seventy-three check valves was selected to run the pilot program on prior to complete implementation. The pilot program produced some significant results and some inconclusive results. The program revealed a major finding that check valve performance modeling is required to ensure continuous operability of check valves. (author)

  20. Improved Message Authentication and Confidentiality Checking

    International Nuclear Information System (INIS)

    Ismail Jabiullah, M.; Abdullah Al-Shamim, M.; Lutfar Rahman, M.

    2005-01-01

    The most confusing areas of the secured network communications are the message authentication and confidentiality checking. The attacks and the counter measures have become so convoluted that the users in this area begin to account for all contingencies. Two session-key generation techniques are used here to generate two separate session keys K 1 and K 2 ; and both the sender and the reveiver share these keys for higher degree of authentication and confidentiality. For this, the message is first encrypted by the key K 1 , and then the intermediary message authenticatin code (MAC) is generated by encrypting the encrypted message using the key K 2 . Then, the encrypted message and the intermediary MAC is again encrypted by using the K 2 and concatenated with the encrypted message and sent to the destination. At the receiving end, first, the received ciphertext is encrypted by using key K 2 and compared to the received MAC. The received ciphertext again is decrypted by the key K 2 and compared with the first decrypted MAC twice by the key K 2 . The plaintext is obtained by decrypting the received ciphertext first by K 2 and then by K 1 , using the corresponding decryption techniques respectively. The encryption techniques with key K 2 provides the authentication and with key K 1 provides the confidentiality checking of the transmitted message. The developed technique can be applied to both academic and commercial applications in online or offline electronic transactions for security.(authors)

  1. Space shuttle prototype check valve development

    Science.gov (United States)

    Tellier, G. F.

    1976-01-01

    Contaminant-resistant seal designs and a dynamically stable prototype check valve for the orbital maneuvering and reaction control helium pressurization systems of the space shuttle were developed. Polymer and carbide seal models were designed and tested. Perfluoroelastomers compatible with N2O4 and N2H4 types were evaluated and compared with Teflon in flat and captive seal models. Low load sealing and contamination resistance tests demonstrated cutter seal superiority over polymer seals. Ceramic and carbide materials were evaluated for N2O4 service using exposure to RFNA as a worst case screen; chemically vapor deposited tungsten carbide was shown to be impervious to the acid after 6 months immersion. A unique carbide shell poppet/cutter seat check valve was designed and tested to demonstrate low cracking pressure ( 2.0 psid), dynamic stability under all test bench flow conditions, contamination resistance (0.001 inch CRES wires cut with 1.5 pound seat load) and long life of 100,000 cycles (leakage 1.0 scc/hr helium from 0.1 to 400 psig).

  2. Polarity Checks in Sectors 23 & 78

    CERN Document Server

    Calaga, R; Lamont, M; Ponce, L; Sun, Y; Tomás, R; Venturini-Delsolaro, W; Zimmermann, F

    2009-01-01

    During the first three LHC synchronization tests on August 10, August 24, and September 7, 2008, linear and higher-order polarity checks were performed with beam 1 in Sector 23 and beam 2 in Sector 78. The main principle of these checks was to launch free betatron oscillations and use the difference trajectory measurements with respect to inverted polarities of circuits under investigation. In the case of zero nominal strength for a circuit, a finite value was introduced. The magnet circuits subjected to these tests were the QT and QTL trim quadrupoles, the MQS skew quadrupoles, the SF and SD arc sextupole circuits, the MCS b3 spool pieces, the OD and OF Landau octupoles, and the MSS skew sextupoles. For some of these circuits sensitivity was enhanced by introducing large momentum offsets. To detect and remove improve spurious contributions from initially off-center orbits, four sets of trajectories were recorded, namely with and without oscillation, and with two magnet strength settings, respectively. We rep...

  3. Does a peer model's task proficiency influence children's solution choice and innovation?

    Science.gov (United States)

    Wood, Lara A; Kendal, Rachel L; Flynn, Emma G

    2015-11-01

    The current study investigated whether 4- to 6-year-old children's task solution choice was influenced by the past proficiency of familiar peer models and the children's personal prior task experience. Peer past proficiency was established through behavioral assessments of interactions with novel tasks alongside peer and teacher predictions of each child's proficiency. Based on these assessments, one peer model with high past proficiency and one age-, sex-, dominance-, and popularity-matched peer model with lower past proficiency were trained to remove a capsule using alternative solutions from a three-solution artificial fruit task. Video demonstrations of the models were shown to children after they had either a personal successful interaction or no interaction with the task. In general, there was not a strong bias toward the high past-proficiency model, perhaps due to a motivation to acquire multiple methods and the salience of other transmission biases. However, there was some evidence of a model-based past-proficiency bias; when the high past-proficiency peer matched the participants' original solution, there was increased use of that solution, whereas if the high past-proficiency peer demonstrated an alternative solution, there was increased use of the alternative social solution and novel solutions. Thus, model proficiency influenced innovation. Copyright © 2015 Elsevier Inc. All rights reserved.

  4. Report on the IAEA-CU-2006-08 proficiency test on the determination of gamma emitting radionuclides in sea water

    International Nuclear Information System (INIS)

    Shakhashiro, A.; Sansone, U.; Martin, P.; Makarewicz, M.; Mohagheghi, A.

    2007-03-01

    The Cooperative Monitoring Centre of Sandia National Laboratories of the United States (SNL) has initiated the Radiation Measurements Cross Calibration (RMCC) project. The RMCC aims to promote regional cooperation in the Middle East for preparedness for radiological emergencies. The International Atomic Energy Agency (IAEA) is cooperating with Sandia National Laboratories in this project. On a practical level, the initial aim of the RMCC is to establish a network of experts to cooperatively standardize nuclear monitoring and measurement capabilities in the Middle East by applying internationally recognized standards for laboratory radiation measurements. One of the project activities is to assist selected radiation measurement laboratories to participate in a quality assurance program and proficiency tests. During the second Workshop of the RMCC Project, organised by Sandia National Laboratories in Doha, Qatar, 12-17 November 2005, it was agreed to request the Chemistry Unit at the Agency's Seibersdorf laboratories to organise a special Proficiency Test (PT) for participants, for gamma-emitters in sea water. It is well known that proficiency testing is a method for regularly assessing the accuracy of the analytical data produced by the laboratories of particular measurements. According to the requirements of the RMCC project the IAEA-CU-2006-08 proficiency test (PT) on the determination of gamma emitting radionuclides in sea water was conducted by the Chemistry Unit of the IAEA's Laboratories located in Seibersdorf (Austria). The Chemistry Unit is actively involved in the production and characterization of matrix reference materials of terrestrial origin, widely used for method validation and organization of proficiency tests and intercomparison studies. The Chemistry Unit is a part of the Physics, Chemistry and Instrumentation Laboratory. This report describes the sample preparation methodology, data evaluation approach, summary evaluation of each nuclide and

  5. 45 CFR 201.70 - Treatment of replacement checks.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 2 2010-10-01 2010-10-01 false Treatment of replacement checks. 201.70 Section... STATES FOR PUBLIC ASSISTANCE PROGRAMS Review and Audits § 201.70 Treatment of replacement checks. (a... (FFP) for replacement checks under titles I, VI-A, X, XIV, XVI (AABD) except under the circumstances...

  6. 40 CFR 86.327-79 - Quench checks; NOX analyzer.

    Science.gov (United States)

    2010-07-01

    ... any flow rate into the reaction chamber. This includes, but is not limited to, sample capillary, ozone... Quench checks; NOX analyzer. (a) Perform the reaction chamber quench check for each model of high vacuum reaction chamber analyzer prior to initial use. (b) Perform the reaction chamber quench check for each new...

  7. 7 CFR 1944.540 - Requesting TSA checks.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 13 2010-01-01 2009-01-01 true Requesting TSA checks. 1944.540 Section 1944.540... TSA checks. (a) The initial TSA check may cover the applicant's needs for the first calendar month. If... the next whole month. (b) The initial advance of TSA grant funds may not be requested simultaneously...

  8. 40 CFR 86.328-79 - Leak checks.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Leak checks. 86.328-79 Section 86.328... Gasoline-Fueled and Diesel-Fueled Heavy-Duty Engines; Gaseous Exhaust Test Procedures § 86.328-79 Leak checks. (a) Vacuum side leak check. (1) Any location within the analysis system where a vacuum leak could...

  9. 12 CFR 229.36 - Presentment and issuance of checks.

    Science.gov (United States)

    2010-01-01

    ... Section 229.36 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM AVAILABILITY OF FUNDS AND COLLECTION OF CHECKS (REGULATION CC) Collection of Checks § 229... on the check, whether in magnetic ink or in fractional form; (3) At any branch or head office, if the...

  10. Progress Check Module; Basic Electricity and Electronics Individualized Learning System. Progress Check Booklet.

    Science.gov (United States)

    Bureau of Naval Personnel, Washington, DC.

    The Progress Check Booklet is designed to be used by the student working in the programed course to determine if he has mastered the concepts in the course booklets on: electrical current; voltage; resistance; measuring current and voltage in series circuits; relationships of current, voltage, and resistance; parellel circuits; combination…

  11. Checking in: An Analysis of the (Lack of) Body Checking in Women's Ice Hockey

    Science.gov (United States)

    Weaving, Charlene; Roberts, Samuel

    2012-01-01

    Despite the growing popularity of women's ice hockey in North America, players continue to face limitations because of the prohibition of body checking. In this paper, we argue from a liberal feminist philosophical perspective that this prohibition reinforces existing traditional stereotypes of female athletes. Because the women's game does not…

  12. 12 CFR Appendix A to Part 229 - Routing Number Guide to Next-Day Availability Checks and Local Checks

    Science.gov (United States)

    2010-01-01

    ... Checks and Local Checks A Appendix A to Part 229 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM AVAILABILITY OF FUNDS AND COLLECTION OF CHECKS... Association. The routing number takes two forms: a fractional form and a nine-digit form. A paying bank...

  13. DEPUTY: analysing architectural structures and checking style

    International Nuclear Information System (INIS)

    Gorshkov, D.; Kochelev, S.; Kotegov, S.; Pavlov, I.; Pravilnikov, V.; Wellisch, J.P.

    2001-01-01

    The DepUty (dependencies utility) can be classified as a project and process management tool. The main goal of DepUty is to assist by means of source code analysis and graphical representation using UML, in understanding dependencies of sub-systems and packages in CMS Object Oriented software, to understand architectural structure, and to schedule code release in modularised integration. It also allows a new-comer to more easily understand the global structure of CMS software, and to void circular dependencies up-front or re-factor the code, in case it was already too close to the edge of non-maintainability. The authors will discuss the various views DepUty provides to analyse package dependencies, and illustrate both the metrics and style checking facilities it provides

  14. The Mars Science Laboratory Organic Check Material

    Science.gov (United States)

    Conrad, Pamela G.; Eigenbrode, Jennifer L.; Von der Heydt, Max O.; Mogensen, Claus T.; Canham, John; Harpold, Dan N.; Johnson, Joel; Errigo, Therese; Glavin, Daniel P.; Mahaffy, Paul R.

    2012-09-01

    Mars Science Laboratory's Curiosity rover carries a set of five external verification standards in hermetically sealed containers that can be sampled as would be a Martian rock, by drilling and then portioning into the solid sample inlet of the Sample Analysis at Mars (SAM) suite. Each organic check material (OCM) canister contains a porous ceramic solid, which has been doped with a fluorinated hydrocarbon marker that can be detected by SAM. The purpose of the OCM is to serve as a verification tool for the organic cleanliness of those parts of the sample chain that cannot be cleaned other than by dilution, i.e., repeated sampling of Martian rock. SAM possesses internal calibrants for verification of both its performance and its internal cleanliness, and the OCM is not used for that purpose. Each OCM unit is designed for one use only, and the choice to do so will be made by the project science group (PSG).

  15. Model Checking JAVA Programs Using Java Pathfinder

    Science.gov (United States)

    Havelund, Klaus; Pressburger, Thomas

    2000-01-01

    This paper describes a translator called JAVA PATHFINDER from JAVA to PROMELA, the "programming language" of the SPIN model checker. The purpose is to establish a framework for verification and debugging of JAVA programs based on model checking. This work should be seen in a broader attempt to make formal methods applicable "in the loop" of programming within NASA's areas such as space, aviation, and robotics. Our main goal is to create automated formal methods such that programmers themselves can apply these in their daily work (in the loop) without the need for specialists to manually reformulate a program into a different notation in order to analyze the program. This work is a continuation of an effort to formally verify, using SPIN, a multi-threaded operating system programmed in Lisp for the Deep-Space 1 spacecraft, and of previous work in applying existing model checkers and theorem provers to real applications.

  16. The criticality check and its applicability for nuclear material accounting

    International Nuclear Information System (INIS)

    Sanchez Espinoza, V.H.; Adam, E.; Knorr, J.

    1988-01-01

    Different procedures are used by the realization of nuclear material check by the IAEA. The criticality check belongs to these methods and it appropriates especially to verification of the nuclear material inventory of reactors. General aspects of the applicability of this check procedure are formulated and application criteria are deduced. By the example of solid-moderated homogeneous zero-power reactors it is demonstrated the unsecurity which is to be reckoned by applying the criticality check. Finally a possibility for the reduction of errors in core material determination by additional measuring methods without questioning the criticality check method is presented. (author)

  17. [An experimental proficiency test for ability to screen 104 residual pesticides in agricultural products].

    Science.gov (United States)

    Tsumura, Yukari; Ishimitsu, Susumu; Otaki, Kayo; Uchimi, Hiroyuki; Matsumoto, Nobuyuki; Daba, Masaki; Tsuchiya, Tetsu; Ukyo, Masaho; Tonogai, Yasuhide

    2003-10-01

    An experimental proficiency test program for ability to screen 104 residual pesticides in agricultural products has been conducted. Eight Japanese laboratories joined the program. Items tested in the present study were limit of detection, internal proficiency test (self spike) and external proficiency test (blind spike). All 104 pesticides were well detected and recovered from agricultural foods in the internal proficiency test. However, the results of the external proficiency test did not completely agree with those of the internal proficiency tests. After 5 rounds of the blind spike test, the ratio of the number of correctly detected pesticides to that of actually contained ones (49 total) ranged from 65% to 100% among laboratories. The numbers of mistakenly detected pesticides by a laboratory were 0 to 15. Thus, there was a great difference among the laboratories in the ability to screen multiresidual pesticides.

  18. Health physics instrumentation - a progress report

    International Nuclear Information System (INIS)

    Maushart, R.

    1992-01-01

    Health Physics Instruments have changed rather dramatically in the past decade. On the one hand, technological innovations like Microprocessors, data storage facilities and imaging displays have altered shape, size and appearance of the classical devices, particularly the hand-held ones. On the other hand, instruments are increasingly being considered as an integral part of Radiation Protection procedures and organizations, supporting a smooth and reliable implementation of all necessary measures. This implies ease of operation, and extensive self-checking and performance control features. Since there are different categories of users with quite different degrees of motivation and training, the measuring instruments of the future will have to be adapted to specific types of users. Instruments for 'professional' radiation protection - for example in nuclear power plants and nuclear technology - will differ from instruments used in the radionuclide laboratory, where radiation protection will necessarily have to be done as a 'side-job'. (author)

  19. Proficiency Test SYKE 8/2012. Volatile organic compounds in water and soil

    OpenAIRE

    Korhonen-Ylönen, Kaija; Nuutinen, Jari; Leivuori, Mirja; Ilmakunnas, Markku

    2013-01-01

    Proftest SYKE carried out the proficiency test for analysis of volatile organic compounds from water and soil in October 2012. One artificial sample and one river water sample and one soil sample were distributed. In total, 15 laboratories participated in the proficiency test. Either the calculated concentration or the robust mean value was chosen to be the assigned value for the measurement. The performance of the participants was evaluated by using z scores. In this proficiency test 72 % of...

  20. Mediterranean Region proficiency test on the determination of radionuclides in air filters. IAEA-CU--2008-02

    International Nuclear Information System (INIS)

    2009-01-01

    The IAEA helps the Member States laboratories to maintain their readiness and improving the quality of the analytical results by producing reference materials, by development of standardized methods for sample collection and analysis, and by conducting interlaboratory comparisons and proficiency tests as a tool for external quality control of analytical results. The Chemistry Unit of the Physics, Chemistry and Instrumentation Laboratory in the International Atomic Energy Agency's Seibersdorf Laboratories in Austria, has the programmatic responsibility to support global radionuclide measurement systems. To fulfil this obligation and ensure a reliable worldwide, rapid and consistent response, the Chemistry Unit organises interlaboratory studies and proficiency tests. The activity concentration of radionuclides in the air is a critical factor in assessing the air quality and the potential impact of possible pollutants. Air is in fact one of the main pathways for human exposure to pollutants. Radioactivity may be present in the atmosphere due to natural processes; intentional (low level) anthropogenic release; or as a consequence of nuclear or radiological incident. Within the frame of the IAEA Technical Cooperation project RER/8/009 'Air Pollution Monitoring in the Mediterranean Region', several Member States expressed their interest in establishing close cooperation among Mediterranean countries in the field of harmonization of air pollution monitoring systems and creation of a common database, since they share geographical position and mutual interest in the environmental conditions of the Mediterranean region. Such cooperation will also promote and enhance the exchange of experience/information. This report summarizes the results of the IAEA-CU-2008-02 Mediterranean Region proficiency test on the determination of radionuclides in air filters

  1. Students' proficiency scores within multitrait item response theory

    Science.gov (United States)

    Scott, Terry F.; Schumayer, Daniel

    2015-12-01

    In this paper we present a series of item response models of data collected using the Force Concept Inventory. The Force Concept Inventory (FCI) was designed to poll the Newtonian conception of force viewed as a multidimensional concept, that is, as a complex of distinguishable conceptual dimensions. Several previous studies have developed single-trait item response models of FCI data; however, we feel that multidimensional models are also appropriate given the explicitly multidimensional design of the inventory. The models employed in the research reported here vary in both the number of fitting parameters and the number of underlying latent traits assumed. We calculate several model information statistics to ensure adequate model fit and to determine which of the models provides the optimal balance of information and parsimony. Our analysis indicates that all item response models tested, from the single-trait Rasch model through to a model with ten latent traits, satisfy the standard requirements of fit. However, analysis of model information criteria indicates that the five-trait model is optimal. We note that an earlier factor analysis of the same FCI data also led to a five-factor model. Furthermore the factors in our previous study and the traits identified in the current work match each other well. The optimal five-trait model assigns proficiency scores to all respondents for each of the five traits. We construct a correlation matrix between the proficiencies in each of these traits. This correlation matrix shows strong correlations between some proficiencies, and strong anticorrelations between others. We present an interpretation of this correlation matrix.

  2. Scientific issues related to the cytology proficiency testing regulations

    Directory of Open Access Journals (Sweden)

    Prey Marianne

    2006-01-01

    Full Text Available Abstract The member organizations of the Cytology Education and Technology Consortium believe there are significant flaws in current cytology proficiency testing regulations. The most immediate needed modifications include lengthening the required testing interval, utilizing stringently validated and continuously monitored slides, changing the grading scheme, and changing the focus of the test from the individual to laboratory level testing. Integration of new computer-assisted and located-guided screening technologies into the testing protocols is necessary for the testing protocol to be compliant with the law.

  3. Inter-laboratory proficiency tests to detect viral fish diseases

    DEFF Research Database (Denmark)

    Kahns, Søren; Nicolajsen, Nicole; Skall, Helle Frank

    An inter-laboratory proficiency test has ben provided by the European Community Laboratory (CRL) for Fish Diseases every year since 1996. The test is provided to all European National Reference Laboratories (NRLs) that are obliged to participate and to a limited number of non-European NRLs, making......) but also to assess their ability to differentiate other fish viruses as spring viraemia of carp virus, infectious pancreatic necrosis virus, perch rhabdovirus etc. Five coded ampoules are provided to participants containing lyophilised supernatant from infected cell cultures. The CRL collect the data...

  4. Culture, identity and difference relationship and the proficiency exam EPPLE

    Directory of Open Access Journals (Sweden)

    Priscila Petian Anchieta

    2017-11-01

    Full Text Available The present work discusses how aspects such as identity, culture and difference are important aspects in for language teaching and learning environments. Using Woodward's (2011 definition that identity is marked by difference, we considered these aspects in foreign language teaching and learning contexts when we learn the laguage of others. In addition, we present a proficiency exam called EPPLE, aimed at language teachers, and we suggest the implementation of a task that addresses cultural issues, because we need to prepare language teachers that search not only for their linguistic and pedagogical knowledge construction, but also for their understanding about culture, identity and difference.

  5. Analysis of an emergency diesel generator control system by compositional model checking. MODSAFE 2010 work report

    International Nuclear Information System (INIS)

    Lahtinen, J.; Bjoerkman, K.; Valkonen, J.; Frits, J.; Niemelae, I.

    2010-12-01

    Digital instrumentation and control (I and C) systems containing programmable logic controllers are challenging to verify. They enable complicated control functions and the state spaces (number of distinct values of inputs, outputs and internal memory) of the designs easily become too large for comprehensive manual inspection. Model checking is a formal method that can be used for verifying that systems have been correctly designed. A number of efficient model checking systems are available which provide analysis tools that are able to determine automatically whether a given state machine model satisfies the desired safety properties. The practical case analysed in this research project is called an 'emergency diesel generator control system' and its purpose is to provide reserve power to critical devices and computers that must be available without interruption. This report describes 1) the development of a compositional approach for checking the models in large system designs, 2) the development of a modular model checking approach for modelling function block diagrams with the Uppaal model checker and 3) the experience of utilising the new modelling approaches in practice. (orig.)

  6. Do alcohol compliance checks decrease underage sales at neighboring establishments?

    Science.gov (United States)

    Erickson, Darin J; Smolenski, Derek J; Toomey, Traci L; Carlin, Bradley P; Wagenaar, Alexander C

    2013-11-01

    Underage alcohol compliance checks conducted by law enforcement agencies can reduce the likelihood of illegal alcohol sales at checked alcohol establishments, and theory suggests that an alcohol establishment that is checked may warn nearby establishments that compliance checks are being conducted in the area. In this study, we examined whether the effects of compliance checks diffuse to neighboring establishments. We used data from the Complying with the Minimum Drinking Age trial, which included more than 2,000 compliance checks conducted at more than 900 alcohol establishments. The primary outcome was the sale of alcohol to a pseudo-underage buyer without the need for age identification. A multilevel logistic regression was used to model the effect of a compliance check at each establishment as well as the effect of compliance checks at neighboring establishments within 500 m (stratified into four equal-radius concentric rings), after buyer, license, establishment, and community-level variables were controlled for. We observed a decrease in the likelihood of establishments selling alcohol to underage youth after they had been checked by law enforcement, but these effects quickly decayed over time. Establishments that had a close neighbor (within 125 m) checked in the past 90 days were also less likely to sell alcohol to young-appearing buyers. The spatial effect of compliance checks on other establishments decayed rapidly with increasing distance. Results confirm the hypothesis that the effects of police compliance checks do spill over to neighboring establishments. These findings have implications for the development of an optimal schedule of police compliance checks.

  7. Seismic instrumentation

    International Nuclear Information System (INIS)

    1984-06-01

    RFS or Regles Fondamentales de Surete (Basic Safety Rules) applicable to certain types of nuclear facilities lay down requirements with which compliance, for the type of facilities and within the scope of application covered by the RFS, is considered to be equivalent to compliance with technical French regulatory practice. The object of the RFS is to take advantage of standardization in the field of safety, while allowing for technical progress in that field. They are designed to enable the operating utility and contractors to know the rules pertaining to various subjects which are considered to be acceptable by the Service Central de Surete des Installations Nucleaires, or the SCSIN (Central Department for the Safety of Nuclear Facilities). These RFS should make safety analysis easier and lead to better understanding between experts and individuals concerned with the problems of nuclear safety. The SCSIN reserves the right to modify, when considered necessary, any RFS and specify, if need be, the terms under which a modification is deemed retroactive. The aim of this RFS is to define the type, location and operating conditions for seismic instrumentation needed to determine promptly the seismic response of nuclear power plants features important to safety to permit comparison of such response with that used as the design basis

  8. Meteorological instrumentation

    International Nuclear Information System (INIS)

    1982-06-01

    RFS or ''Regles Fondamentales de Surete'' (Basic Safety Rules) applicable to certain types of nuclear facilities lay down requirements with which compliance, for the type of facilities and within the scope of application covered by the RFS, is considered to be equivalent to compliance with technical French regulatory practice. The object of the RFS is to take advantage of standardization in the field of safety , while allowing for technical progress in that field. They are designed to enable the operating utility and contractors to know the rules pertaining to various subjects which are considered to be acceptable by the ''Service Central de Surete des Installations Nucleaires'' or the SCSIN (Central Department for the Safety of Nuclear Facilities). These RFS should make safety analysis easier and lead to better understanding between experts and individuals concerned with the problems of nuclear safety. The SCSIN reserves the right to modify, when considered necessary any RFS and specify, if need be, the terms under which a modification is deemed retroactive. The purpose of this RFS is to specify the meteorological instrumentation required at the site of each nuclear power plant equipped with at least one pressurized water reactor

  9. On the development of a computer-based handwriting assessment tool to objectively quantify handwriting proficiency in children.

    Science.gov (United States)

    Falk, Tiago H; Tam, Cynthia; Schellnus, Heidi; Chau, Tom

    2011-12-01

    Standardized writing assessments such as the Minnesota Handwriting Assessment (MHA) can inform interventions for handwriting difficulties, which are prevalent among school-aged children. However, these tests usually involve the laborious task of subjectively rating the legibility of the written product, precluding their practical use in some clinical and educational settings. This study describes a portable computer-based handwriting assessment tool to objectively measure MHA quality scores and to detect handwriting difficulties in children. Several measures are proposed based on spatial, temporal, and grip force measurements obtained from a custom-built handwriting instrument. Thirty-five first and second grade students participated in the study, nine of whom exhibited handwriting difficulties. Students performed the MHA test and were subjectively scored based on speed and handwriting quality using five primitives: legibility, form, alignment, size, and space. Several spatial parameters are shown to correlate significantly (phandwriting legibility and speed, respectively. Using only size and space parameters, promising discrimination between proficient and non-proficient handwriting can be achieved. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

  10. ALMERA proficiency test on the determination of radionuclides in spinach, soil and water. IAEA-CU-2007-04

    International Nuclear Information System (INIS)

    2009-01-01

    The Analytical Laboratories for the Measurement of Environmental Radioactivity (ALMERA) network established by the IAEA in 1995 makes available to Member States a world-wide network of analytical laboratories capable of providing reliable and timely analysis of environmental samples in the event of an accidental or intentional release of radioactivity. The network is a technical collaboration of existing institutions. It provides an operational framework to link expertise and resources, in particular when a boundary-transgressing contamination is expected or when an event is of international significance. A primary requirement of the ALMERA members is participation in the IAEA interlaboratory comparisons which are specifically organized for ALMERA on a regular basis. These exercises are designed to monitor and demonstrate the performance and analytical capabilities of the network members, and to identify gaps and problem areas where further development is needed. Continued membership has benefits in training and educational opportunities, enhanced mutual trust in results and methodology and objective evidence for accreditation purposes. The performance evaluation results of the proficiency tests performed in the frame of the ALMERA network are not anonymous for those laboratories nominating to participate as ALMERA members. The Chemistry Unit of the Physics, Chemistry and Instrumentation Laboratory in the IAEA Laboratory, Seibersdorf in Austria, has the programmatic responsibility to support activities in Member States laboratories, including coordination of ALMERA network. This report describes the methodology employed and the results obtained in the IAEA-CU- 2009-04 proficiency test on determination of radionuclides in spinach, soil and water

  11. Effective ambiguity checking in biosequence analysis

    Directory of Open Access Journals (Sweden)

    Giegerich Robert

    2005-06-01

    Full Text Available Abstract Background Ambiguity is a problem in biosequence analysis that arises in various analysis tasks solved via dynamic programming, and in particular, in the modeling of families of RNA secondary structures with stochastic context free grammars. Several types of analysis are invalidated by the presence of ambiguity. As this problem inherits undecidability (as we show here from the namely problem for context free languages, there is no complete algorithmic solution to the problem of ambiguity checking. Results We explain frequently observed sources of ambiguity, and show how to avoid them. We suggest four testing procedures that may help to detect ambiguity when present, including a just-in-time test that permits to work safely with a potentially ambiguous grammar. We introduce, for the special case of stochastic context free grammars and RNA structure modeling, an automated partial procedure for proving non-ambiguity. It is used to demonstrate non-ambiguity for several relevant grammars. Conclusion Our mechanical proof procedure and our testing methods provide a powerful arsenal of methods to ensure non-ambiguity.

  12. Personalized medicine: reality and reality checks.

    Science.gov (United States)

    Leeder, J Steven; Spielberg, Stephen P

    2009-05-01

    The evolving era of pharmacogenomics and personalized medicine is greeted with optimism by many, but this sentiment is not universally shared. The existence of diametrically opposed opinions concerning the potential benefits and obstacles facing the widespread implementation of genomic medicine should stimulate discussion and guide the design of studies to establish the value of interventions targeted at the level of individual patients. One of the more controversial aspects of personalized medicine is whether the anticipated benefits will be realized at an acceptable cost. Recently released analyses suggest that the returns on investment depend on the particular scenario and are different for different stakeholders. On the other hand, cost is only one of the challenges regarding implementation of personalized medicine. Among these are the development of universal standards for managing genomic information in electronic medical records, improvement in the collection and interpretation of clinical phenotype data, and new strategies to educate practitioners and patients/consumers. The reality is that personalized medicine is upon us; open discourse and periodic reality checks will be necessary as we confront it.

  13. Get Your Kids Moving and Check Some Chores off Your List

    Science.gov (United States)

    ... Check Recipe Certification Program Nutrition Requirements Heart-Check Professional Resources Contact the Heart-Check Certification Program Simple Cooking and Recipes Dining Out Choosing a Restaurant Deciphering ...

  14. Uncertainty evaluation in 2008 IAEA proficiency test using phosphogypsum

    International Nuclear Information System (INIS)

    Dias, Fabiana F.; Taddei, Maria Helena T.; Geraldo, Bianca; Jacomino, Vanusa M.F.; Pontedeiro, Elizabeth M.B.

    2009-01-01

    LAPOC participated in the 2008 IAEA ALMERA (Analytical Laboratories for the Measurement of Environmental Radioactivity) Proficiency Test (PT) for phosphogypsum, which is a NORM (Naturally Occurring Radioactive Material) derived from phosphate industry, an abundant solid waste of low cost. Its reutilization would avoid environmental impact in large areas where the product is stored. Research involving possible uses for phosphogypsum is ever more important, from economic, technological, and environmental points of view. This paper describes results from this Proficiency Test (measured radionuclides: 234 U, 238 U, 226 Ra, 230 Th, and 210 Pb), as well as a short description of the nuclear analytical techniques emphasizing sources of uncertainty, such as Alpha Spectrometry (Alpha Analyst, Canberra, surface barrier detectors) and Gamma Spectrometry (Canberra, Hyper Pure Germanium Detector with 45 % efficiency). Corrections for decay, reference date, and recovery were applied. As an example, results obtained for 210 Pb through the use of a specific uncertainty calculation software are presented below. Each parameter whose uncertainty is quantified was carefully described, with appropriate numerical value and unit, to determine its partial contribution to the combined total uncertainty. Results from PTs provide independent information on performance of a Laboratory and have an important role in method validation; especially because it allows the assessment of the method performance over an entire range of concentrations and matrices. PTs are an important tool to demonstrate equivalence of measurements, if not their metrological comparability, and to promote education and improvement of Laboratory practice. (author)

  15. SYNCHRONOUS CMC, WORKING MEMORY, AND L2 ORAL PROFICIENCY DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    J. Scott Payne

    2005-09-01

    Full Text Available Recently a number of quasi-experimental studies have investigated the potential of a cross-modality transfer of second language competency between real-time, conversational exchange via text and speech (Abrams, 2003; Beauvious, 1998; Kost, 2004; Payne & Whitney, 2002. Payne and Whitney employed Levelt's (1989 model of language production and concepts from working memory as a rationale for a hypothesized connection between synchronous computer-mediated communication (SCMC and second language (L2 speech and as a basis for predicting the differential contributions of SCMC to the L2 oral proficiency development.This study extends the psycholinguistic framework reported in Payne and Whitney (2002 with discourse and corpus analytic techniques to explore how individual differences in working memory capacity may affect the frequency of repetition and other patterns of language use in chatroom discourse. Working memory capacity was measured by a reading span and nonword repetition test. Oral proficiency was measured with a speaking task that solicited a 5-minute speech sample and was scored based on a holistic scale. The data collected from 20 chat sessions were analyzed for occurrences of repetition and relexicalization, as well as language output measures. Findings suggest a connection between working memory and language output as measured in this study.

  16. Laboratory competence evaluation through proficiency testing - mycotoxins in food

    Directory of Open Access Journals (Sweden)

    Torović Ljilja D.

    2017-01-01

    Full Text Available Laboratory for analysis of mycotoxins in food at the Institute of Public Health of Vojvodina (Novi Sad, Serbia participated in 15 proficiency testing schemes in period 2012-2016, comprising 22 determinations of regulated mycotoxins: aflatoxins B1, B2, G1, G2 and M1, ochratoxin A, deoxynivalenone, zearalenone, fumonisins and patulin, in different food commodities: wheat, corn, barley, breakfast cereals, infant food, milk, wine and fruit juice. Analyses were carried out by high performance liquid chromatography with ultraviolet (patulin, deoxynivalenol or fluorescence detection (aflatoxin M1, ochratoxin A, zearalenone using o-phthalaldehyde precolumn derivatization (fumonisins or UV postcolumn derivatization (aflatoxins B1, B2, G1, G2, following clean-up on immunoaffinity columns with specific antibodies, except in case of patulin when solvent extraction and solid-phase C-18 clean-up were used. Laboratory performance assessed in terms of z scores showed all satisfactory results. In depth evaluation revealed following distribution of z scores (absolute values: 59.1% up to 0.5, 36.4% between 0.5 and 1.0, and 4.5% above 1.0. Analysis of trends performed for multiple determinations of individual mycotoxins showed several changes of z score to better or worse rank. Overall assessment of the performance in proficiency testing demonstrated laboratory competence for analysis of mycotoxins in food.

  17. Proficiency evaluation of maintenance personnel: Training equivalency determination

    International Nuclear Information System (INIS)

    Price, W.J.

    1991-01-01

    The nuclear industry has recognized the importance of safe, quality, productive maintenance practices and has taken a number of initiatives that have generally improved maintenance programs. Because proficient maintenance practices are critical to plant safety and reliability, most plants have also recognized the need for reliable, valid testing techniques that demonstrate and assure the competence of their maintenance personnel. Until now, resource demands were too great to develop in-plant testing programs. In the past, maintenance supervisors have exempted personnel from training, using informal judgment of the employees' previous training and experience and informal observation of the employee on the job. While this procedure may have some degree of validity, it fails to provide the documentation for training equivalency that is required to satisfy the US Nuclear Regulatory Commission (NRC) regulations and Institute of Nuclear Power Operations (INPO) guidelines. To assess and demonstrate the proficiency levels of personnel, Calvert Cliffs needed to establish an objective, reliable, time-saving, and valid system to evaluate the competency levels of personnel. This was done in a joint effort with the Electric Power Research Institute

  18. Radiological instrument

    International Nuclear Information System (INIS)

    Kronenberg, S.; McLaughlin, W.L.; Seibentritt, C.R. Jr.

    1986-01-01

    An instrument is described for measuring radiation, particularly nuclear radiation, comprising: a radiation sensitive structure pivoted toward one end and including a pair of elongated solid members contiguously joined together along their length dimensions and having a common planar interface therebetween. One of the pairs of members is comprised of radiochromic material whose index of refraction changes due to anomolous dispersion as a result of being exposed to nuclear radiation. The pair of members further has mutually different indices of refraction with the member having the larger index of refraction further being transparent for the passage of light and of energy therethrough; means located toward the other end of the structure for varying the angle of longitudinal elevation of the pair of members; means for generating and projecting a beam of light into one end of the member having the larger index of refraction. The beam of light is projected toward the planar interface where it is reflected out of the other end of the same member as a first output beam; means projecting a portion of the beam of light into one end of the member having the larger index of refraction where it traverses therethrough without reflection and out of the other end of the same member as a second output beam; and means adjacent the structure for receiving the first and second output beams, whereby a calibrated change in the angle of elevation of the structure between positions of equal intensity of the first and second output beams prior to and following exposure provides a measure of the radiation sensed due to a change of refraction of the radiochromic material

  19. Check and maintenance strategies and practice

    International Nuclear Information System (INIS)

    Buettner, W.E.

    1982-01-01

    There exists no uniform test and maintenance strategy for instrumentation and control in German nuclear power plants. The procedures vary according to the plant type (PWR or BWR), the utility and the licensing authority responsible for the plant, but there are common aspects and also requirements from regulatory guides. This common main aspects are treated and exemplified in this lecture. The lecture is confined to operational procedures and preoperational or commissioning tests will be not described in spite of the fact that commissioning procedures may look like operational procedures. (orig./RW)

  20. Related Fact Checks: a tool for combating fake news

    OpenAIRE

    Guha, Sreya

    2017-01-01

    The emergence of "Fake News" and misinformation via online news and social media has spurred an interest in computational tools to combat this phenomenon. In this paper we present a new "Related Fact Checks" service, which can help a reader critically evaluate an article and make a judgment on its veracity by bringing up fact checks that are relevant to the article. We describe the core technical problems that need to be solved in building a "Related Fact Checks" service, and present results ...

  1. Cycle time reduction by Html report in mask checking flow

    Science.gov (United States)

    Chen, Jian-Cheng; Lu, Min-Ying; Fang, Xiang; Shen, Ming-Feng; Ma, Shou-Yuan; Yang, Chuen-Huei; Tsai, Joe; Lee, Rachel; Deng, Erwin; Lin, Ling-Chieh; Liao, Hung-Yueh; Tsai, Jenny; Bowhill, Amanda; Vu, Hien; Russell, Gordon

    2017-07-01

    The Mask Data Correctness Check (MDCC) is a reticle-level, multi-layer DRC-like check evolved from mask rule check (MRC). The MDCC uses extended job deck (EJB) to achieve mask composition and to perform a detailed check for positioning and integrity of each component of the reticle. Different design patterns on the mask will be mapped to different layers. Therefore, users may be able to review the whole reticle and check the interactions between different designs before the final mask pattern file is available. However, many types of MDCC check results, such as errors from overlapping patterns usually have very large and complex-shaped highlighted areas covering the boundary of the design. Users have to load the result OASIS file and overlap it to the original database that was assembled in MDCC process on a layout viewer, then search for the details of the check results. We introduce a quick result-reviewing method based on an html format report generated by Calibre® RVE. In the report generation process, we analyze and extract the essential part of result OASIS file to a result database (RDB) file by standard verification rule format (SVRF) commands. Calibre® RVE automatically loads the assembled reticle pattern and generates screen shots of these check results. All the processes are automatically triggered just after the MDCC process finishes. Users just have to open the html report to get the information they need: for example, check summary, captured images of results and their coordinates.

  2. Next-generation nozzle check valve significantly reduces operating costs

    Energy Technology Data Exchange (ETDEWEB)

    Roorda, O. [SMX International, Toronto, ON (Canada)

    2009-01-15

    Check valves perform an important function in preventing reverse flow and protecting plant and mechanical equipment. However, the variety of different types of valves and extreme differences in performance even within one type can change maintenance requirements and life cycle costs, amounting to millions of dollars over the typical 15-year design life of piping components. A next-generation non-slam nozzle check valve which prevents return flow has greatly reduced operating costs by protecting the mechanical equipment in a piping system. This article described the check valve varieties such as the swing check valve, a dual-plate check valve, and nozzle check valves. Advancements in optimized design of a non-slam nozzle check valve were also discussed, with particular reference to computer flow modelling such as computational fluid dynamics; computer stress modelling such as finite element analysis; and flow testing (using rapid prototype development and flow loop testing), both to improve dynamic performance and reduce hydraulic losses. The benefits of maximized dynamic performance and minimized pressure loss from the new designed valve were also outlined. It was concluded that this latest non-slam nozzle check valve design has potential applications in natural gas, liquefied natural gas, and oil pipelines, including subsea applications, as well as refineries, and petrochemical plants among others, and is suitable for horizontal and vertical installation. The result of this next-generation nozzle check valve design is not only superior performance, and effective protection of mechanical equipment but also minimized life cycle costs. 1 fig.

  3. Mothers' use of and attitudes to BabyCheck.

    OpenAIRE

    Thomson, Hilary; Ross, Sue; Wilson, Philip; McConnachie, Alex; Watson, Richard

    2002-01-01

    A copy of BabyCheck was sent to 497 mothers shortly after the birth of their baby. Six months later they were sent a questionnaire asking about their use of and attitudes to, BabyCheck. Questionnaires were returned by 323 (65%) mothers; 215 (67%) of them reported reading BabyCheck, the majority found it easy to understand (74%) and agreed with the advice (67%). Eighty-four (26%) of the mothers who returned the questionnaires reported using BabyCheck when their baby was ill; of these, 71% agre...

  4. Safety and Availability Checking for User Authorization Queries in RBAC

    Directory of Open Access Journals (Sweden)

    Jian-feng Lu

    2012-09-01

    Full Text Available This paper introduces the notion of safety and availability checking for user authorization query processing, and develop a recursive algorithm use the ideas from backtracking-based search techniques to search for the optimal solution. For the availability checking, we introduce the notion of max activatable set (MAS, and show formally how MAS can be determined in a hybrid role hierarchy. For the safety checking, we give a formal definition of dynamic separation-of-duty (DSoD policies, and show how to reduce the safety checking for DSoD to a SAT instance.

  5. The modulatory role of second language proficiency on performance monitoring: evidence from a saccadic countermanding task in high and low proficient bilinguals.

    Science.gov (United States)

    Singh, Niharika; Mishra, Ramesh K

    2014-01-01

    We compared Hindi-English bilinguals differing in their L2 proficiency on a saccadic countermanding task which taps inhibitory control as well as monitoring. We particularly explored whether response inhibition and performance monitoring within the oculomotor domain are affected by language proficiency in bilinguals. There were two different oculomotor redirect tasks: Visually Guided Redirect (VGR) task (Experiment1) and Memory Guided Redirect (MGR) task (Experiment 2). In the redirect task, typically a target is presented and the subject is required to make a saccade (no-step trials), unless a new target appears on a different location after some delay from the first target onset (step trials). On such trials participants are required to inhibit and cancel the saccade to the first target and programme a saccade to the new target. Using trial switch reaction time (TSRT), the time taken to inhibit the initiated saccade to the first target as a measure of response inhibition and post-step slowing as a measure of performance monitoring. The results showed the high proficient bilinguals displayed more post-step slowing on the no-step trials as compared to the low proficient bilinguals for both VGR and MGR versions of the task. Secondly, both the high and low proficient bilinguals exhibited comparable TSRT in both VGR and MGR task, showing no modulatory effects of language proficiency on the response inhibition. These results suggest that language proficiency may have an effect on performance monitoring, but not the inhibitory control per se. Thus, we infer that higher proficiency may lead to superior cognitive flexibility and an ability to adjust behavior that facilitates the attainment of the cognitive goal. These findings are in consonance with other current studies that suggest a top-down effect of bilingualism on action control systems.

  6. Incorporation of proficiency criteria for basic laparoscopic skills training: How does it work?

    NARCIS (Netherlands)

    E. Verdaasdonk (Egg); J. Dankelman (Jenny); J.F. Lange (Johan); L.P. Stassen (Laurents)

    2008-01-01

    textabstractBackground: It is desirable that surgical trainees are proficient in basic laparoscopic motor skills (eye-hand coordination). The present study evaluated the use of predefined proficiency criteria on a basic virtual reality (VR) simulator in preparation for a laparoscopic course on

  7. The Relationship between Reading Proficiency and Reading Strategy Use: A Study of Adult ESL Learners

    Science.gov (United States)

    Huang, Jiuhan; Nisbet, Deanna

    2014-01-01

    This article explores the relationship between reading strategy use and reading proficiency among 121 adult ESL learners. Reading strategy use was measured by the SORS, and reading proficiency was determined by the CASAS Reading Test and BEST Literacy Test. Findings of the study reveal that (a) adult ESL learners are active strategies users; (b)…

  8. English Proficiency and Acculturation among Chinese Immigrant Youth in Canada: A Reciprocal Relationship

    Science.gov (United States)

    Jia, Fanli; Gottardo, Alexandra; Chen, Xi; Koh, Pohwee; Pasquarella, Adrian

    2016-01-01

    The main focus of this study was to refine our understanding of the link between English proficiency and mainstream acculturation in adolescent Chinese immigrants. The sample consisted of 112 adolescents in grades 7-12 living in urban areas in southern Ontario, Canada. English proficiency was assessed individually using standardised tests of…

  9. L2-proficiency-dependent laterality shift in structural connectivity of brain language pathways

    NARCIS (Netherlands)

    Xiang, H.; Leeuwen, T.M. van; Dediu, D.; Roberts, L.; Norris, D.; Hagoort, P.

    2015-01-01

    Diffusion tensor imaging (DTI) and a longitudinal language learning approach were applied to investigate the relationship between the achieved second language (L2) proficiency during L2 learning and the reorganization of structural connectivity between core language areas. Language proficiency tests

  10. Understanding the Relationship between Language Proficiency, Language Impairment and Rehabilitation: Evidence from a Case Study

    Science.gov (United States)

    Kiran, Swathi; Iakupova, Regina

    2011-01-01

    The goal of this study was to address the relationship between language proficiency, language impairment and rehabilitation in bilingual Russian-English individuals with aphasia. As a first step, we examined two Russian-English patients' pre-stroke language proficiency using a detailed and comprehensive language use and history questionnaire and…

  11. ELL High School Students' Metacognitive Awareness of Reading Strategy Use and Reading Proficiency

    Science.gov (United States)

    Hong-Nam, Kay

    2014-01-01

    This study investigated the metacognitive awareness and reading strategies use of high school-­aged English language learners (ELLs) and the relationship between ELL reading strategy use and reading proficiency as measured by a standardized reading test and self-­rated reading proficiency. Results reveal that participants reported moderate use of…

  12. Development and Validation of the Spanish-English Language Proficiency Scale (SELPS)

    Science.gov (United States)

    Smyk, Ekaterina; Restrepo, M. Adelaida; Gorin, Joanna S.; Gray, Shelley

    2013-01-01

    Purpose: This study examined the development and validation of a criterion-referenced Spanish-English Language Proficiency Scale (SELPS) that was designed to assess the oral language skills of sequential bilingual children ages 4-8. This article reports results for the English proficiency portion of the scale. Method: The SELPS assesses syntactic…

  13. Digital Games and the US National Research Council's Science Proficiency Goals

    Science.gov (United States)

    Martinez-Garza, Mario; Clark, Douglas B.; Nelson, Brian C.

    2013-01-01

    This review synthesises research on digital games and science learning as it supports the goals for science proficiency outlined in the report by the US National Research Council on science education reform. The review is organised in terms of these research-based goals for science proficiency in light of their alignment with current science…

  14. Volunteer Administration Leadership Proficiency and Leadership Styles: Perceptions of Southern Region 4-H County Faculty

    Science.gov (United States)

    Stedman, Nicole L. P.; Rudd, Rick D.

    2005-01-01

    Volunteers play an integral role in supporting the mission of 4-H programs in the southern region. For this reason their proficiency in volunteer administration competence and perceived leadership style is important. The researchers sought to examine both the perceived proficiency of 4-H faculty in the southern region in seven competencies…

  15. Motor Proficiency and Body Mass Index of Preschool Children: In Relation to Socioeconomic Status

    Science.gov (United States)

    Mülazimoglu-Balli, Özgür

    2016-01-01

    The aim of the study was to investigate the correlation between motor proficiency and body mass index and to assess the socioeconomic status differences in motor proficiency and body mass index of preschool children. Sixty preschool children in the different socioeconomic status areas of central Denizli in Turkey participated in the study. The…

  16. Language Learning Strategies and English Proficiency: Interpretations from Information-Processing Theory

    Science.gov (United States)

    Rao, Zhenhui

    2016-01-01

    The research reported here investigated the relationship between students' use of language learning strategies and their English proficiency, and then interpreted the data from two models in information-processing theory. Results showed that the students' English proficiency significantly affected their use of learning strategies, with high-level…

  17. Hi-LAB: A New Measure of Aptitude for High-Level Language Proficiency

    Science.gov (United States)

    Linck, Jared A.; Hughes, Meredith M.; Campbell, Susan G.; Silbert, Noah H.; Tare, Medha; Jackson, Scott R.; Smith, Benjamin K.; Bunting, Michael F.; Doughty, Catherine J.

    2013-01-01

    Few adult second language (L2) learners successfully attain high-level proficiency. Although decades of research on beginning to intermediate stages of L2 learning have identified a number of predictors of the rate of acquisition, little research has examined factors relevant to predicting very high levels of L2 proficiency. The current study,…

  18. L2-Proficiency-Dependent Laterality Shift in Structural Connectivity of Brain Language Pathways

    NARCIS (Netherlands)

    Xiang, Huadong; van Leeuwen, Tessa Marije; Dediu, Dan; Roberts, Leah; Norris, David G.; Hagoort, Peter

    2015-01-01

    Diffusion tensor imaging (DTI) and a longitudinal language learning approach were applied to investigate the relationship between the achieved second language (L2) proficiency during L2 learning and the reorganization of structural connectivity between core language areas. Language proficiency tests

  19. The application of data from proficiency testing to laboratory accreditation according to ISO 17025

    DEFF Research Database (Denmark)

    Heydorn, Kaj

    2008-01-01

    Current methods of testing laboratories for their proficiency in reporting correct measurement results are liable to substantial errors of the 2nd kind. This means that laboratories with deflated uncertainties are accepted as proficient, even though their reported measurement results pave the way...

  20. A Blueprint for Developing Culturally Proficient/Responsive School Administrators in Special Education

    Science.gov (United States)

    Bakken, Jeffrey P.; Smith, Beverly A.

    2011-01-01

    This article addresses the important topic of culturally proficient/responsive school administrators for culturally and linguistically diverse (CLD) students with learning disabilities (LD). Culturally proficient/responsive school administrators with knowledge and strong leadership skills in multicultural education are essential to impact school…

  1. Self-Efficacy Ratings of Technology Proficiency among Teachers in Mexico and Texas

    Science.gov (United States)

    Morales, Cesareo; Knezek, Gerald; Christensen, Rhonda

    2008-01-01

    The Technology Proficiency Self-Assessment (TPSA) questionnaire was administered to 978 elementary and middle school teachers from Mexico City, and 932 elementary and middle school teachers from the Dallas, Texas, metroplex in the USA, in order to examine self-efficacy similarities and differences for technology proficiency self-appraisals in a…

  2. The Reading Habits of Developmental College Students at Different Levels of Reading Proficiency.

    Science.gov (United States)

    Sheorey, Ravi; Mokhtari, Kouider

    1994-01-01

    Examines differences in reading habits of developmental college students with varying levels of reading proficiency. Finds that subjects spent an unusually low amount of time on academic reading and even less time on nonacademic reading. Finds no significant differences between high- and low-proficient readers with regard to amount of time spent…

  3. Reading Habits of University ESL Students at Different Levels of English Proficiency and Education.

    Science.gov (United States)

    Mokhtari, Kouider; Sheorey, Ravi

    1994-01-01

    Examines the degree to which the levels of English proficiency (high vs. low) and education (graduate vs. undergraduate) of English-as-a-Second-Language (ESL) students were associated with differences in their reading behaviors. Finds that the subjects' level of education and English proficiency were associated with their reading behavior…

  4. Non-Discriminatory Assessment: Formal and Informal Assessment of Limited English Proficient Children.

    Science.gov (United States)

    Mares, Sharon

    PEOPLE (Pruebas de Expresion Oral y Percepcion de la Lengua Espanol) was developed as a test to help distinguish between a language difference and a language deficit in non English proficient (NEP) and limited English proficient (LEP) elementary Hispanic students. PEOPLE was developed, pilot tested in 14 school districts in Los Angeles County with…

  5. Issues in Vertical Scaling of a K-12 English Language Proficiency Test

    Science.gov (United States)

    Kenyon, Dorry M.; MacGregor, David; Li, Dongyang; Cook, H. Gary

    2011-01-01

    One of the mandates of the No Child Left Behind Act is that states show adequate yearly progress in their English language learners' (ELLs) acquisition of English language proficiency. States are required to assess ELLs' English language proficiency annually in four language domains (listening, reading, writing, and speaking) to measure their…

  6. Technological Proficiency as a Key to Job Security. Trends and Issues Alert No. 6.

    Science.gov (United States)

    Imel, Susan

    Although not all current jobs require basic computer skills, technological advances in society have created new jobs and changed the ways many existing jobs are performed. Clearly, workers who are proficient in technology have a greater advantage in the current workplace and the need for technologically proficient workers will only continue to…

  7. Report on the IAEA-CU-2006-03 world-wide open proficiency test on the determination of gamma emitting radionuclides

    International Nuclear Information System (INIS)

    Shakhashiro, A.; Sansone, U.; Trinkl, A.; Makarewicz, M.; Yonezawa, C.; Kim, C.K.; Kis-Benedek, G.; Benesch, T.; Schorn, R.

    2007-05-01

    The results of analytical measurements play a vital role in our daily lives. Analytical data may be the basis upon which economic, legal or environmental management decisions are made, and they are essential in international trade, environmental protection, safe transportation, law enforcement, consumer safety and the preservation of human health. As an incorrect decision can be extremely costly and detrimental, it is essential that such measurements are accurate, reliable, cost effective and defensible. In addition, measurements performed by laboratories located worldwide should yield traceable and comparable results. Proficiency testing is a method for regularly assessing the accuracy of the analytical data produced by the laboratories of particular measurements. The IAEA-CU-2006-03 world-wide proficiency test (PT) on the determination of gamma emitting radionuclides in water grass and soil is conducted by the Chemistry Unit of the IAEA's Laboratories located in Seibersdorf (Austria), which is actively involved in the production and characterization of matrix reference materials of terrestrial origin, widely used for method validation and organization of proficiency tests and intercomparison studies. The Chemistry Unit is a part of the Physics, Chemistry and Instrumentation Laboratory. This report describes the sample preparation methodology, data evaluation approach, summary evaluation of each nuclide and individual evaluation report for each laboratory

  8. The relationship between automatic assessment of oral proficiency and other indicators of first year students' linguistic abilities

    CSIR Research Space (South Africa)

    De Wet, Febe

    2012-11-01

    Full Text Available Academic literacy proficiency is key to the success of a student at university. Currently, the large-scale assessment of language proficiency, particularly at higher education levels, is dominated by reading and writing tests because listening...

  9. Relationships Between English Language Proficiency, Health Literacy, and Health Outcomes in Somali Refugees.

    Science.gov (United States)

    Murphy, Jessica E; Smock, Laura; Hunter-Adams, Jo; Xuan, Ziming; Cochran, Jennifer; Paasche-Orlow, Michael K; Geltman, Paul L

    2018-06-15

    Little is known about the impacts of health literacy and English proficiency on the health status of Somali refugees. Data came from interviews in 2009-2011 of 411 adult Somali refugees recently resettled in Massachusetts. English proficiency, health literacy, and physical and mental health were measured using the Basic English Skills Test Plus, the Short Test of Health Literacy in Adults, and the Physical and Mental Component Summaries of the Short Form-12. Associations were analyzed using multiple linear regression. In adjusted analyses, higher English proficiency was associated with worse mental health in males. English proficiency was not associated with physical health. Health literacy was associated with neither physical nor mental health. Language proficiency may adversely affect the mental health of male Somali refugees, contrary to findings in other immigrant groups. Research on underlying mechanisms and opportunities to understand this relationship are needed.

  10. Research on the proficient machine system. Theoretical part; Jukutatsu machine system no chosa kenkyu. Rironhen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The basic theory of the proficient machine system to be developed was studied. Important proficient techniques in manufacturing industries are becoming extinct because of insufficient succession to next generation. The proficient machine system was proposed to cope with such situation. This machine system includes the mechanism for progress and evolution of techniques and sensibilities to be adaptable to environmental changes by learning and recognizing various motions such as work and process. Consequently, the basic research fields are composed of thought, learning, perception and action. This machine requires not only deigned fixed functions but also introduction of the same proficient concept as human being to be adaptable to changes in situation, purpose, time and machine`s complexity. This report explains in detail the basic concept, system principle, approaching procedure and practical elemental technologies of the proficient machine system, and also describes the future prospect. 133 refs., 110 figs., 7 tabs.

  11. Heart check: the development and evolution of an organizational heart health assessment.

    Science.gov (United States)

    Golaszewski, Thomas; Fisher, Brian

    2002-01-01

    The purpose of this article is to document the development, testing, and application of an organizational assessment tool used to measure employer support for heart health. Additional information is presented on its future research and applications plan. This article represents the pooling of results from multiple studies using a variety of designs, including pilot tests, cross-sectional analyses, and quasi-experiments. Worksites covering the spectrum of employers across industry types and size, and throughout all of New York State. Over 10,000 New York employees and 1000 New York employers are represented in the multiple phases of this research. Heart Check is a 226-item inventory designed to measure such features in the worksite as organizational foundations, administrative supports, tobacco control, nutrition support, physical activity support, stress management, screening services, and company demographics. Additional side studies used professional judgments and behavioral surveys. As an assessment tool Heart Check shows evidence for reliability and validity. Applications of the instrument show characteristics that define high-scoring companies, quasi standards for New York employers, and, when applied during interventions, positive changes in organizational support levels. A relatively inexpensive, easy-to-use, and metrically tested instrument exists for measuring the construct of organizational support for employee heart health. The instrument shows promise as part of a system to enhance heart health through public health-based interventions in the workplace.

  12. 25 CFR 115.704 - May we accept for deposit into a trust account retirement checks/payments or pension fund checks...

    Science.gov (United States)

    2010-04-01

    ... checks/payments or pension fund checks/payments even though those funds are not specified in § 115.702... May we accept for deposit into a trust account retirement checks/payments or pension fund checks.../payments or pension fund checks/payments or any funds from sources that are not identified in the table in...

  13. Use of a personal computer for instrumentation testing at the FFTF

    International Nuclear Information System (INIS)

    Clark, D.A.

    1985-01-01

    The FFTF uses computers to assist in performance of instrumentation calibration checks for Technical Specification compliance. When the computers used for these checks are not available, back-up methods must be used. A method of using a personal computer to serve as a back-up is discussed, and the hardware used is described

  14. 31 CFR 10.31 - Negotiation of taxpayer checks.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Negotiation of taxpayer checks. 10.31 Section 10.31 Money and Finance: Treasury Office of the Secretary of the Treasury PRACTICE BEFORE THE INTERNAL REVENUE SERVICE Duties and Restrictions Relating to Practice Before the Internal Revenue Service § 10.31 Negotiation of taxpayer checks. ...

  15. Simple nonparametric checks for model data fit in CAT

    NARCIS (Netherlands)

    Meijer, R.R.

    2005-01-01

    In this paper, the usefulness of several nonparametric checks is discussed in a computerized adaptive testing (CAT) context. Although there is no tradition of nonparametric scalability in CAT, it can be argued that scalability checks can be useful to investigate, for example, the quality of item

  16. 26 CFR 301.6657-1 - Bad checks.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 18 2010-04-01 2010-04-01 false Bad checks. 301.6657-1 Section 301.6657-1... Additions to the Tax and Additional Amounts § 301.6657-1 Bad checks. (a) In general. Except as provided in... district director that it was tendered in good faith with reasonable cause to believe that it would be duly...

  17. Employees are ambivalent about health checks in the occupational setting

    NARCIS (Netherlands)

    Damman, O.C.; van der Beek, A.J.; Timmermans, D.R.M.

    2015-01-01

    Background: Employees are increasingly provided with preventive health checks. However, participation rates are low and several ethical issues arise, such as a potential perceived threat to autonomy and privacy. Aims: To assess what employees think about preventive health checks in the occupational

  18. Not Just right experiences as ironic result of perseverative checking

    NARCIS (Netherlands)

    van Dis, E.A.M.; van den Hout, M.A.

    2016-01-01

    Objective: patients with obsessive-compulsive disorder (ocD) typically report to have “not just right experiences” (NJRE). up till now it is unclear which behavioral ocD features may give rise to NJREs. We used an induced checking paradigm to experimentally study whether perseverative checking

  19. Development of a stainless steel check valve for cryogenic applications

    NARCIS (Netherlands)

    Veenstra, T.T.; Venhorst, G.C.F.; Venhorst, G.C.F.; Burger, Johannes Faas; Holland, Herman J.; ter Brake, Hermanus J.M.; Sirbi, A.; Rogalla, Horst

    2007-01-01

    This paper describes the development of a check valve for use in a sorption compressor that will drive a 10 mW 4.5 K Joule–Thomson cryocooler. For the check valve extremely low backflow rates are tolerable at an operating temperature of the valve of 50 K. To fulfill these requirements, the sealing

  20. Check-up Measurement (update). Deliverable D5.22

    NARCIS (Netherlands)

    Holtzer, A.C.G.; Giessen, A.M.D. van der; Djurica, M.

    2015-01-01

    This deliverable D5.22 presents the GEN6 check-up measurement. It describes the most prominent outcomes of the GEN6 project up to this point in time. The check-up measurement helps to focus the monitoring towards the most relevant achievements of the project, such that an efficient and well-targeted

  1. Model Checking Markov Reward Models with Impulse Rewards

    NARCIS (Netherlands)

    Cloth, Lucia; Katoen, Joost-Pieter; Khattri, Maneesh; Pulungan, Reza; Bondavalli, Andrea; Haverkort, Boudewijn; Tang, Dong

    This paper considers model checking of Markov reward models (MRMs), continuous-time Markov chains with state rewards as well as impulse rewards. The reward extension of the logic CSL (Continuous Stochastic Logic) is interpreted over such MRMs, and two numerical algorithms are provided to check the

  2. Efficient probabilistic model checking on general purpose graphic processors

    NARCIS (Netherlands)

    Bosnacki, D.; Edelkamp, S.; Sulewski, D.; Pasareanu, C.S.

    2009-01-01

    We present algorithms for parallel probabilistic model checking on general purpose graphic processing units (GPGPUs). For this purpose we exploit the fact that some of the basic algorithms for probabilistic model checking rely on matrix vector multiplication. Since this kind of linear algebraic

  3. 16 CFR 240.12 - Checking customer's use of payments.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Checking customer's use of payments. 240.12 Section 240.12 Commercial Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR ADVERTISING ALLOWANCES AND OTHER MERCHANDISING PAYMENTS AND SERVICES § 240.12 Checking customer's use of...

  4. Dynamic State Space Partitioning for External Memory Model Checking

    DEFF Research Database (Denmark)

    Evangelista, Sami; Kristensen, Lars Michael

    2009-01-01

    We describe a dynamic partitioning scheme usable by model checking techniques that divide the state space into partitions, such as most external memory and distributed model checking algorithms. The goal of the scheme is to reduce the number of transitions that link states belonging to different...

  5. 31 CFR 211.1 - Withholding delivery of checks.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Withholding delivery of checks. 211.1 Section 211.1 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) FISCAL SERVICE, DEPARTMENT OF THE TREASURY FINANCIAL MANAGEMENT SERVICE DELIVERY OF CHECKS AND WARRANTS TO...

  6. Checking Consistency of Pedigree Information is NP-complete

    DEFF Research Database (Denmark)

    Aceto, Luca; Hansen, Jens A.; Ingolfsdottir, Anna

    Consistency checking is a fundamental computational problem in genetics. Given a pedigree and information on the genotypes of some of the individuals in it, the aim of consistency checking is to determine whether these data are consistent with the classic Mendelian laws of inheritance. This probl...

  7. 40 CFR 89.317 - NOX converter check.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false NOX converter check. 89.317 Section 89.317 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED..., the chemiluminescent oxides of nitrogen analyzer shall be checked for NO2 to NO converter efficiency...

  8. Strategic Planning through Model Checking of ATL Formulae

    NARCIS (Netherlands)

    Jamroga, W.J.; Rutkowski, L.; Siekmann, J.; Tadeusiewicz, R.; Zadeh, L.A.

    2004-01-01

    Model checking of temporal logic has already been proposed for automatic planning. In this paper, we introduce a simple adaptation of the ATL model checking algorithm that returns a strategy to achieve given goal. We point out that the algorithm generalizes minimaxing, and that ATL models generalize

  9. Partial-Order Reduction for GPU Model Checking

    NARCIS (Netherlands)

    Neele, T.; Wijs, A.; Bosnacki, D.; van de Pol, Jan Cornelis; Artho, C; Legay, A.; Peled, D.

    2016-01-01

    Model checking using GPUs has seen increased popularity over the last years. Because GPUs have a limited amount of memory, only small to medium-sized systems can be verified. For on-the-fly explicit-state model checking, we improve memory efficiency by applying partial-order reduction. We propose

  10. Partial-order reduction for GPU model checking

    NARCIS (Netherlands)

    Neele, T.S.; Wijs, A.J.; Bošnački, D.; van de Pol, J.C.

    2016-01-01

    Model checking using GPUs has seen increased popularity over the last years. Because GPUs have a limited amount of memory, only small to medium-sized systems can be verified. For on-the-fly explicitstate model checking, we improve memory efficiency by applying partialorder reduction. We propose

  11. Fraud by using a check | Azarian | Journal of Fundamental and ...

    African Journals Online (AJOL)

    If someone used check as a tool to fraud and looting of property of others, should they just be subject to check law, and according to the provisions of the law are prosecuted? Are crook people the same as honorable merchants that due to some unwanted changes and fluctuations in the market and social conditions

  12. Gaining Proficiency through Task-Based Activities in the Portuguese Classroom (Beginning and Intermediate Year Case Studies)

    Science.gov (United States)

    Jones-Kellogg, Rebecca

    2015-01-01

    This paper describes a task-based activity used at the United States Military Academy, in their first- through third-semester Portuguese language sequence "Proficiencies" (Proficiências). The stand-alone task-based activity can be an effective tool in gaining foreign-language proficiency at even the lowest levels of classroom instruction…

  13. 40 CFR 798.5500 - Differential growth inhibition of repair proficient and repair deficient bacteria: “Bacterial DNA...

    Science.gov (United States)

    2010-07-01

    ... repair proficient and repair deficient bacteria: âBacterial DNA damage or repair tests.â 798.5500 Section... inhibition of repair proficient and repair deficient bacteria: “Bacterial DNA damage or repair tests.” (a... killing or growth inhibition of repair deficient bacteria in a set of repair proficient and deficient...

  14. Statistical Model Checking of Rich Models and Properties

    DEFF Research Database (Denmark)

    Poulsen, Danny Bøgsted

    in undecidability issues for the traditional model checking approaches. Statistical model checking has proven itself a valuable supplement to model checking and this thesis is concerned with extending this software validation technique to stochastic hybrid systems. The thesis consists of two parts: the first part...... motivates why existing model checking technology should be supplemented by new techniques. It also contains a brief introduction to probability theory and concepts covered by the six papers making up the second part. The first two papers are concerned with developing online monitoring techniques...... systems. The fifth paper shows how stochastic hybrid automata are useful for modelling biological systems and the final paper is concerned with showing how statistical model checking is efficiently distributed. In parallel with developing the theory contained in the papers, a substantial part of this work...

  15. 31 CFR 245.8 - Receipt or recovery of original check.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Receipt or recovery of original check... CHECKS § 245.8 Receipt or recovery of original check. (a) If the original check is received or recovered... of instructions with respect to the negotiability of such check. (b) If the original check is...

  16. Developing an ICT-Literacy Task-Based Assessment Instrument: The Findings on the Final Testing Phase

    Science.gov (United States)

    Mat-jizat, Jessnor Elmy

    2013-01-01

    This paper reports the findings of a study which seeks to identify the information and communications technology (ICT) literacy levels of trainee teachers, by investigating their ICT proficiency using a task-bask assessment instrument. The Delphi technique was used as a primary validation method for the new assessment tool and the ICT literacy…

  17. Systematic Review of the Check-In, Check-Out Intervention for Students at Risk for Emotional and Behavioral Disorders

    Science.gov (United States)

    Hawken, Leanne S.; Bundock, Kaitlin; Kladis, Kristin; O'Keeffe, Breda; Barret, Courtenay A.

    2014-01-01

    The purpose of this systematic literature review was to summarize outcomes of the Check-in Check-out (CICO) intervention across elementary and secondary settings. Twenty-eight studies utilizing both single subject and group (experimental and quasi-experimental) designs were included in this review. Median effect sizes across the eight group…

  18. Language proficiency and metacognition as predictors of spontaneous rehearsal in children.

    Science.gov (United States)

    Bebko, James M; McMorris, Carly A; Metcalfe, Alisa; Ricciuti, Christina; Goldstein, Gayle

    2014-03-01

    Despite decades of research on fundamental memory strategies such as verbal rehearsal, the potential underlying skills associated with the emergence of rehearsal are still not fully understood. Two studies examined the relative roles of language proficiency and metamemory in predicting rehearsal use, as well as the prediction of metamemory performance by language proficiency. In Study 1, 59 children, 5 to 8 years old, were administered a serial recall task, 2 language measures, a nonverbal cognitive measure, and a rapid automatized naming (RAN) task. Language proficiency, RAN, and age were significant individual predictors of rehearsal use. In hierarchical regression analyses, language proficiency mediated almost completely the age → rehearsal use relation. In addition, automatized naming was a strong but partial mediator of the contribution of language proficiency to rehearsal use. In Study 2, 54 children were administered a metamemory test, a language measure, and a serial recall task. Metamemory skills and, again, language proficiency significantly predicted rehearsal use in the task. The predictive strength of metamemory skills was mediated by the children's language proficiency. The mutually supportive roles of automatized naming, language, and metamemory in the emergence of spontaneous cumulative verbal rehearsal are discussed in the context of the resulting model, along with the minimal roles of age and aspects of intelligence.

  19. Childhood motor skill proficiency as a predictor of adolescent physical activity.

    Science.gov (United States)

    Barnett, Lisa M; van Beurden, Eric; Morgan, Philip J; Brooks, Lyndon O; Beard, John R

    2009-03-01

    Cross-sectional evidence has demonstrated the importance of motor skill proficiency to physical activity participation, but it is unknown whether skill proficiency predicts subsequent physical activity. In 2000, children's proficiency in object control (kick, catch, throw) and locomotor (hop, side gallop, vertical jump) skills were assessed in a school intervention. In 2006/07, the physical activity of former participants was assessed using the Australian Physical Activity Recall Questionnaire. Linear regressions examined relationships between the reported time adolescents spent participating in moderate-to-vigorous or organized physical activity and their childhood skill proficiency, controlling for gender and school grade. A logistic regression examined the probability of participating in vigorous activity. Of 481 original participants located, 297 (62%) consented and 276 (57%) were surveyed. All were in secondary school with females comprising 52% (144). Adolescent time in moderate-to-vigorous and organized activity was positively associated with childhood object control proficiency. Respective models accounted for 12.7% (p = .001), and 18.2% of the variation (p = .003). Object control proficient children became adolescents with a 10% to 20% higher chance of vigorous activity participation. Object control proficient children were more likely to become active adolescents. Motor skill development should be a key strategy in childhood interventions aiming to promote long-term physical activity.

  20. Recent advances in ratio primary reference measurement procedures (definitive methods) and their use in certification of reference materials and controlling assigned values in proficiency testing

    International Nuclear Information System (INIS)

    Dybczyñski, R.S.; Polkowska-Motrenko, H.; Chajduk, E.; Danko, B.; Pyszynska, M.

    2014-01-01

    The idea of definitive methods based on radiochemical neutron activation analysis (RNAA), consists in combination of neutron activation with the highly selective and quantitative post-irradiation isolation of the desired radionuclide by column chromatography followed by γ-ray spectrometric measurement. The principles of construction of such methods, which were devised in the Institute of Nuclear Chemistry and Technology, are reminded and the significance of these methods for analytical quality assurance is emphasized. According to VIM 3 nomenclature these methods may be called: ratio primary reference measurement procedures (RPRMPs). RPRMP for the determination of Se is briefly presented and its use for checking the accuracy of 'assigned values' established by expert laboratories in some proficiency tests, is demonstrated

  1. Fundamental movement skills proficiency in children with developmental coordination disorder: does physical self-concept matter?

    Science.gov (United States)

    Yu, Jie; Sit, Cindy H P; Capio, Catherine M; Burnett, Angus; Ha, Amy S C; Huang, Wendy Y J

    2016-01-01

    The purpose of this study was to (1) examine differences in fundamental movement skills (FMS) proficiency, physical self-concept, and physical activity in children with and without developmental coordination disorder (DCD), and (2) determine the association of FMS proficiency with physical self-concept while considering key confounding factors. Participants included 43 children with DCD and 87 age-matched typically developing (TD) children. FMS proficiency was assessed using the Test of Gross Motor Development - second edition. Physical self-concept and physical activity were assessed using self-report questionnaires. A two-way (group by gender) ANCOVA was used to determine whether between-group differences existed in FMS proficiency, physical self-concept, and physical activity after controlling for age and BMI. Partial correlations and hierarchical multiple regression models were used to examine the relationship between FMS proficiency and physical self-concept. Compared with their TD peers, children with DCD displayed less proficiency in various components of FMS and viewed themselves as being less competent in physical coordination, sporting ability, and physical health. Physical coordination was a significant predictor of ability in object control skills. DCD status and gender were significant predictors of FMS proficiency. Future FMS interventions should target children with DCD and girls, and should emphasize improving object control skills proficiency and physical coordination. Children with DCD tend to have not only lower FMS proficiency than age-matched typically developing children but also lower physical self-concept. Self-perceptions of physical coordination by children with DCD are likely to be valuable contributors to development of object control skills. This may then help to develop their confidence in performing motor skills. Children with DCD need supportive programs that facilitate the development of object control skills. Efficacy of training

  2. Improvement of seawater booster pump outlet check valve

    International Nuclear Information System (INIS)

    Li Xuning; Du Yansong; Huang Huimin

    2010-01-01

    Conventional island seawater booster pump set of QNPC 310 MWe unit are very important in the whole circulating cooling system, and the integrate function of seawater booster pump outlet check valve is the foundation of steady operation of the seawater booster pump set. The article mainly introduce that through the analyses to the reason to the problem that the seawater booster pump outlet check valve of QNPC 310 MWe unit appeared in past years by our team, and considering the influence of operation condition and circumstance, the team improve the seawater booster pump outlet check valve from swing check valve to shuttle check valve which operate more appropriately in the system. By the test of continuous practice, we make further modification to the inner structure of shuttle check valve contrapuntally, and therefore we solve the problem in seawater booster pump outlet check valve fundamentally which has troubled the security of system operation in past years, so we realize the aim of technical improvement and ensure that the system operate in safety and stability. (authors)

  3. Check valve diagnostics utilizing acoustic and magnetic technologies

    International Nuclear Information System (INIS)

    Agostinelli, A.

    1991-01-01

    The potential hazards associated with check valve failures make it necessary to detect check valve problems before they cause significant damage. In the nuclear industry, check valve failures are known to have resulted in damaging water hammer conditions, overpressurization of low pressure systems, steam binding of auxiliary feedwater pumps, and other serious component damage in power plant environments. Similar problems exist in fossil power and various process industries, but the resources dedicated to valve maintenance issues are greatly reduced. However, the trend toward plant life extension, predictive maintenance, and maximum operating efficiency will raise the general awareness of check valve maintenance in commercial (non-nuclear) applications. Although this paper includes specific references to the nuclear industry, the check valve problem conditions and diagnostic techniques apply across all power and process plant environments. The ability to accurately diagnose check valve conditions using non-intrusive, predictive maintenance testing methods allows for a more cost-efficient, productive maintenance program. One particular diagnostic system, called Quickcheck trademark, assists utilities in addressing these concerns. This article presents actual field test data and analysis that demonstrate the power of check valve diagnostics. Prior to presenting the field data, a brief overview of the system is overviewed

  4. Experimental Facility for Checking the Possibility to Obtain Super-High Temperature Due to Acoustic Cavitation

    CERN Document Server

    Miller, M B; Sobolev, Yu G; Kostenko, B F

    2004-01-01

    An experimental facility developed for checking the possibility to obtain super-high temperature sufficient for thermonuclear reaction D($d, n$)$^{3}$He in an acoustic cavitation is described. The acoustic part of the instrumentation consists of a resonator and a system exciting high amplitude of the acoustic field within the resonator. The cavitation process is controlled with the use of fast neutron pulses. The instrument includes a system of pumping out solute gases from the liquid (acetone enriched with deuterium up to 99{\\%}) without losses of matter. Measuring of the field is based on the calibration procedure including observation of sonoluminescence. The system of detection and identification of D($d, n$)$^{3}$He reaction is based on a scintillation detector of fast neutrons and a system of measuring multiparameter events by the correlation technique with separation of the neutrons from the $\\gamma $-radiation background (pulse shape discrimination).

  5. Assessment of Proficiency During Simulated Rover Operations Following Long-Duration Spaceflight

    Science.gov (United States)

    Wood, S. J.; Dean, S. L.; De Dios, Y. E.; MacDougall, H. G.; Moore, S. T.

    2011-01-01

    Following long-duration space travel, pressurized rovers will enhance crew mobility to explore Mars and other planetary surfaces. Adaptive changes in sensorimotor function may limit the crew s proficiency when performing some rover operations shortly after transition to the new gravitoinertial environment. The primary goal of this investigation is to quantify postflight decrements in operational proficiency in a motion-based rover simulation after International Space Station (ISS) expeditions. Given that postflight performance will also be influenced by the level of preflight proficiency attained, a ground-based normative study was conducted to characterize the acquisition of skills over multiple sessions.

  6. EFL Speech Production: Exploring the relationship between working memory capacity and proficiency level

    Directory of Open Access Journals (Sweden)

    Gicele Vergine Vieira PREBIANCA

    2013-12-01

    Full Text Available The present study explores the relationship between working memory capacity (WMC and proficiency level in EFL1 speech production. Forty-one participants performed two WMC tests – the Speaking Span Test in L1 and in L2. The statistical analysis indicated both a variation on WMC scores in L2 as a function of proficiency as well as a difference between WMC scores in L1 and in L2. Findings are explained mainly in respect to the interplay between automatic and controlled processes on memory retrieval and on the development of L2 proficiency.

  7. Results of the Proficiency Test, PT1 and PT2, 2012

    DEFF Research Database (Denmark)

    Vendramin, Niccolò; Nicolajsen, Nicole; Christophersen, Maj-Britt

    A comparative test of diagnostic procedures was provided by the European Union Reference Laboratory (EURL) for Fish Diseases. The test was divided into proficiency test 1 (PT1) and proficiency test 2 (PT2). The number of National Reference Laboratories (NRLs) participating in PT1 and PT2 was 43. ....... The tests were sent from the EURL in the beginning of September 2012. Both PT1 and PT2 are accredited by DANAK under registration number 515 for proficiency testing according to the quality assurance standard DS/EN ISO/IEC 17043....

  8. The Interplay among Emotional Intelligence, Classroom Management, and Language Proficiency of Iranian EFL Teachers

    Directory of Open Access Journals (Sweden)

    Hadi Hamidi

    2016-06-01

    Full Text Available The present study was an attempt to investigate the interplay among Iranian EFL teachers’ emotional intelligence, classroom management, and their general English language proficiency. The result of the data analysis showed that: 1 there was a statistically significant relationship between the emotional intelligence and the classroom management of Iranian EFL teachers, 2 there was a statistically significant relationship between the emotional intelligence and the language proficiency of Iranian EFL teachers, and 3 there was a statistically significant relationship between the classroom management and the language proficiency of Iranian EFL teachers. Teacher trainers, researchers in teacher education, and language teachers may benefit from the findings of the present research.

  9. System for automatic checking of nuclear radiation detectors of sparkle type

    International Nuclear Information System (INIS)

    Gutierrez O, E.; Vilchis P, A.; Romero G, M.; Torres B, M.A.; Garcia H, J.M.

    2001-01-01

    In this work an automatic system of checking of nuclear detectors of sparkle type is described. This system is used in laboratory for the checking of the parameters which define the reliable operation of each detector, also it compares the obtained results with those proportionated by the manufacturer for the operator can emit the acceptance or rejection criteria. The checking system consists of an acquisition data card with a digital signal processor (DSP) as central device, a programmable high voltage source and an insertion and conversion module. These components interact with a personal computer to provide to the operator the energy spectra, the nuclear pulse form and the merit figure. The obtained results are showed in graphic form and/or numerical values and it is possible store them in a data file and/or in printed form. For facilitating the interaction of the computer with the user, the system software was realized with a commercial language of graphic programming (virtual instrumentation). (Author)

  10. Towards an automated checked baggage inspection system augmented with robots

    Science.gov (United States)

    DeDonato, Matthew P.; Dimitrov, Velin; Padır, Taskin

    2014-05-01

    We present a novel system for enhancing the efficiency and accuracy of checked baggage screening process at airports. The system requirements address the identification and retrieval of objects of interest that are prohibited in a checked luggage. The automated testbed is comprised of a Baxter research robot designed by Rethink Robotics for luggage and object manipulation, and a down-looking overhead RGB-D sensor for inspection and detection. We discuss an overview of current system implementations, areas of opportunity for improvements, robot system integration challenges, details of the proposed software architecture and experimental results from a case study for identifying various kinds of lighters in checked bags.

  11. PREREQUISITE PROGRAMMES IN OWN CHECKS IN STATUTORY AND VOLUNTARY LEGISLATION

    Directory of Open Access Journals (Sweden)

    E. Guidi

    2012-08-01

    Full Text Available Prerequisite Programmes approach is a requirement for implementing a correct own check plan. This new approach, born according to the European Legislation, is completely recognized by third Nation Authorities and private Inspection and Accreditation Bodies. This method is the basis to verify if an own check system is under control and to verify if corrective actions are built up to warrant hygienic production standards. The present work demonstrate that a correct own check plan is built up only by a Pre Requisites Program approach. The new UNI EN ISO 22000:2005 standard describe this concept specifying the difference between PRP and CCP.

  12. Implementing Model-Check for Employee and Management Satisfaction

    Science.gov (United States)

    Jones, Corey; LaPha, Steven

    2013-01-01

    This presentation will discuss methods to which ModelCheck can be implemented to not only improve model quality, but also satisfy both employees and management through different sets of quality checks. This approach allows a standard set of modeling practices to be upheld throughout a company, with minimal interaction required by the end user. The presenter will demonstrate how to create multiple ModelCheck standards, preventing users from evading the system, and how it can improve the quality of drawings and models.

  13. Plant experience with check valves in passive systems

    Energy Technology Data Exchange (ETDEWEB)

    Pahladsingh, R R [GKN Joint Nuclear Power Plant, Dodewaard (Netherlands)

    1996-12-01

    In the design of the advanced nuclear reactors there is a tendency to introduce more passive safety systems. The 25 year old design of the GKN nuclear reactor is different from the present BWR reactors because of some special features, such as the Natural Circulation - and the Passive Isolation Condenser system. When reviewing the design, one can conclude that the plant has 25 years of experience with check valves in passive systems and as passive components in systems. The result of this experience has been modeled in a plant-specific ``living PSA`` for the plant. A data-analysis has been performed on components which are related to the safety systems in the plant. As part of this study also the check valves have been taken in consideration. At GKN, the check valves have shown to be reliable components in the systems and no catastrophic failures have been experienced during the 25 years of operation. Especially the Isolation Condenser with its operation experience can contribute substantially to the insight of check valves in stand-by position at reactor pressure and operating by gravity under different pressure conditions. With the introduction of several passive systems in the SBWR-600 design, such as the Isolation Condensers, Gravity Driven Cooling, and Suppression Pool Cooling System, the issue of reliability of check valves in these systems is actual. Some critical aspects for study in connection with check valves are: What is the reliability of a check valve in a system at reactor pressure, to open on demand; what is the reliability of a check valve in a system at low pressure (gravity), to open on demand; what is the reliability of a check valve to open/close when the stand-by check wave is at zero differential pressure. The plant experience with check valves in a few essential safety systems is described and a brief introduction will be made about the application of check valves in the design of the new generation reactors is given. (author). 6 figs, 1 tab.

  14. Evaluating musical instruments

    International Nuclear Information System (INIS)

    Campbell, D. Murray

    2014-01-01

    Scientific measurements of sound generation and radiation by musical instruments are surprisingly hard to correlate with the subtle and complex judgments of instrumental quality made by expert musicians

  15. [Validation of a German-language Version of the Body Checking Questionnaire (BCQ) in Adolescents with Anorexia and Bulimia Nervosa].

    Science.gov (United States)

    Steinfeld, Beate; Bauer, Anika; Waldorf, Manuel; Engel, Nicole; Braks, Karsten; Huber, Thomas J; Vocks, Silja

    2017-01-01

    Body-related checking behavior, as a behavioral manifestation of a disturbed body image, fosters the development and maintenance of eating disorders. The Body Checking Questionnaire (BCQ) is the most commonly used questionnaire for measuring body-related checking behavior internationally. To date, validation studies are only available for adult populations. Therefore, the aim of this study was to statistically test the German-language version of the BCQ in adolescents. A total of N=129 female adolescents were examined, comprising n=57 with Anorexia Nervosa, n=24 with Bulimia Nervosa, and n=48 healthy female adolescents. A confirmatory factor analysis supports the subdivision of the BCQ into a general factor and the subfactors "overall appearance", "specific body parts" and "idiosyncratic checking", which was also found in the original version. The internal consistencies are good (α≥0.81), and the BCQ is able to differentiate well between adolescents with and without eating disorders. Significant correlations between the BCQ and other body image questionnaires point to a good convergent validity. The German-language BCQ thus constitutes a valid and reliable instrument for measuring body-related checking behavior among adolescents in clinical research and practice. © Georg Thieme Verlag KG Stuttgart · New York.

  16. Measuring Instruments Control Methodology Performance for Analog Electronics Remote Labs

    Directory of Open Access Journals (Sweden)

    Unai Hernandez-Jayo

    2012-12-01

    Full Text Available This paper presents the work that has been developed in parallel to the VISIR project. The objective of this paper is to present the results of the validations processes that have been carried out to check the control methodology. This method has been developed with the aim of being independent of the instruments of the labs.

  17. Establishing Validity of the Thai Mathematics Teaching Efficacy Beliefs Instrument

    Science.gov (United States)

    Matney, Gabriel; Jackson, Jack L., II.; Panarach, Yupadee

    2016-01-01

    This article presents our work in translating the Mathematics Teaching Efficacy Beliefs Instrument (MTEBI) from English to Thai and our resulting investigation of validity with Thai preservice teachers. The translation process occurred over several meetings between two U.S. mathematics educators and one Thai mathematics educator. To check for…

  18. Exercise: When to Check with Your Doctor First

    Science.gov (United States)

    ... check with your doctor before you start to exercise. By Mayo Clinic Staff Regular exercise can help you control your weight, reduce your ... talk to your doctor before starting a new exercise routine. Although moderate physical activity such as brisk ...

  19. Reality Checks: The state of civil society organizations in Ethiopia ...

    African Journals Online (AJOL)

    Reality Checks: The state of civil society organizations in Ethiopia. ... limit the space for CSOs working on human rights and governance and it is legitimate and ... This paper contains contextualized arguments based on empirical data as reality ...

  20. Multi-Valued Modal Fixed Point Logics for Model Checking

    Science.gov (United States)

    Nishizawa, Koki

    In this paper, I will show how multi-valued logics are used for model checking. Model checking is an automatic technique to analyze correctness of hardware and software systems. A model checker is based on a temporal logic or a modal fixed point logic. That is to say, a system to be checked is formalized as a Kripke model, a property to be satisfied by the system is formalized as a temporal formula or a modal formula, and the model checker checks that the Kripke model satisfies the formula. Although most existing model checkers are based on 2-valued logics, recently new attempts have been made to extend the underlying logics of model checkers to multi-valued logics. I will summarize these new results.

  1. PSYCHE, ENDF/B Data Consistency Check in ENDF Format

    International Nuclear Information System (INIS)

    Dunford, Charles L.

    2007-01-01

    1 - Description of program or function: PSYCHE is a program for checking the physics content of an evaluated data file. It can recognise the difference between ENDF-5 or ENDF-6 formats and performs its tests accordingly. Version 7.01 (April 2005): set success flag after return from begin, added potential scattering test formerly in Fizcon. Version 7.02 (May 2005): Fixed bug in calculation of L=2 penetrability. 2 - Method of solution: PSYCHE checks for energy conservation for emitted neutrons and photons, checks Wick's limit for elastic scattering, analyses resonance parameter statistics, calculates thermal cross sections and resonance integrals, examines continuity across resonance region boundaries and checks 'Q' values against mass tables

  2. Automatic checking system of radioactivity in motor-cars 'AKKORD'

    International Nuclear Information System (INIS)

    Kuechler, L.; Seidler, M.; Zierenberg, B.

    1994-01-01

    A monitoring device has been developed for an automated checking of all vehicles leaving or entering a nuclear installation against uncontrolled lost of radioactive material. This device is an excellent tool for radioactive material flow control. (orig.) [de

  3. Review and analysis of check valve failure data

    International Nuclear Information System (INIS)

    Todd, M.D.; Casada, D.A.

    1992-01-01

    Check valve operating problems in recent years have resulted in significant operating transients, increased cost and decreased system availability. There has been, in response, additional attention given to check valves by utilities, as well as the US Nuclear Regulatory Commission and the American Society of Mechanical Engineers Operation and Maintenance Committee. All these organizations have the fundamental goal of ensuring reliable operation of check valves. A key ingredient to an engineering-oriented reliability improvement effort is a thorough understanding of relevant historical experience. Oak Ridge National Laboratory is currently conducting a detailed review of historical failure data available through the Institute of Nuclear Power Operation's Nuclear Plant Reliability Data System. The focus of the review is on check valve failures that have involved significant degradation of the valve internal parts. A variety of parameters are being considered during the review, including size, age, system of service, method of failure discovery, the affected valve parts, attributed causes, and corrective actions

  4. 48 CFR 22.406-7 - Compliance checking.

    Science.gov (United States)

    2010-10-01

    ... SOCIOECONOMIC PROGRAMS APPLICATION OF LABOR LAWS TO GOVERNMENT ACQUISITIONS Labor Standards for Contracts... inspections to check type of work performed, number and classification of workers, and fulfillment of posting...

  5. NRC valve performance test program - check valve testing

    International Nuclear Information System (INIS)

    Jeanmougin, N.M.

    1987-01-01

    The Valve Performance Test Program addresses the current requirements for testing of pressure isolation valves (PIVs) in light water reactors. Leak rate monitoring is the current method used by operating commercial power plants to survey the condition of their PIVs. ETEC testing of three check valves (4-inch, 6-inch, and 12-inch nominal diameters) indicates that leak rate testing is not a reliable method for detecting impending valve failure. Acoustic emission monitoring of check valves shows promise as a method of detecting loosened internals damage. Future efforts will focus on evaluation of acoustic emission monitoring as a technique for determining check valve condition. Three gate valves also will be tested to evaluate whether the check valve results are applicable to gate type PIVs

  6. Online Assessment of Oral Proficiency for Intercultural Professional Communication: An introduction

    NARCIS (Netherlands)

    Rusman, Ellen; Stoyanov, Slavi

    2012-01-01

    Rusman, E., & Stoyanov, S. (2011). Online Assessment of Oral Proficiency for Intercultural Professional Communication: An introduction. Presentation about the CEFcult project (www.cefcult.eu) as an introduction to various personal interviews held with stakeholders, Heerlen, The Netherlands: Open

  7. Chinese ESL Students' Learning Strategies: A Look at Frequency, Proficiency, and Gender.

    Science.gov (United States)

    Foong, Kwah Poh; Goh, Christine C. M.

    1997-01-01

    Examines the learning strategies of English-as-Second-Language students in the People's Republic of China. Surveyed the frequency of strategy use to determine how it is influenced by learners' proficiency level and gender. (Author/VWL)

  8. Five year results of an international proficiency testing programme for measurement of antifungal drug concentrations

    NARCIS (Netherlands)

    Lempers, V.J.C.; Alffenaar, J.W.C.; Touw, D.J.; Burger, D.M.; Uges, D.R.A.; Aarnoutse, R.E.; Brüggemann, R.J.M.

    2014-01-01

    OBJECTIVES: Since 2007 the Dutch Association for Quality Assessment in Therapeutic Drug Monitoring (KKGT) has organized an international interlaboratory proficiency testing (PT) programme for measurement of antifungal drugs in plasma. We describe the 5 year results of the laboratories' performance.

  9. Paris Chamber of Commerce Examinations and ACTFL/ETS Proficiency Levels.

    Science.gov (United States)

    Cummins, Patricia W.

    1987-01-01

    Compares the Paris Chamber of Commerce Exams (both certificate and diploma levels) and the ACTFL Guidelines for language proficiency for the benefit of language teachers. Teaching strategies are suggested for preparing students for the Chamber of Commerce exams. (LMO)

  10. TEST OF ENGLISH FOR AVIATION PERSONNEL TO MEET ICAO LANGUAGE PROFICIENCY REQUIREMENTS

    Directory of Open Access Journals (Sweden)

    Olena Petrashchuk

    2012-10-01

    Full Text Available  The article is devoted to the actual problem of the assessment of English language proficiency of aviation personnel. The paper presents an English language test, which is used for professional pilots and air traffic controllers.

  11. Progress realized by numerized Eddy current checking-chains

    International Nuclear Information System (INIS)

    Guerin, F.; Blanchet, A.

    1985-01-01

    Until the last ten years , the tubes of the Steam Generators of the Nuclear Stations were inspected by means of Eddy Current with analogical checkings-chains. HBS Company has perfected a numerized checking-chain allowing transmission up to 300 m of the E.C. signals. In a near future, it will be then possible to do periodical inspections of Steam Generators from cabins located out of the reactor building [fr

  12. SOLA-LOOP analysis of a back pressure check valve

    International Nuclear Information System (INIS)

    Travis, J.R.

    1984-01-01

    The SOLA-LOOP computer code for transient, nonequilibrium, two-phase flows in networks has been coupled with a simple valve model to analyze a feedwater pipe breakage with a back-pressure check valve. Three tests from the Superheated Steam Reactor Safety Program Project (PHDR) at Kahl, West Germany, are analyzed, and the calculated transient back-pressure check valve behavior and fluid dynamics effects are found to be in excellent agreement with the experimentally measured data

  13. Model checking biological systems described using ambient calculus

    DEFF Research Database (Denmark)

    Mardare, Radu Iulian; Priami, Corrado; Qualia, Paola

    2005-01-01

    Model checking biological systems described using ambient calculus. In Proc. of the second International Workshop on Computational Methods in Systems Biology (CMSB04), Lecture Notes in Bioinformatics 3082:85-103, Springer, 2005.......Model checking biological systems described using ambient calculus. In Proc. of the second International Workshop on Computational Methods in Systems Biology (CMSB04), Lecture Notes in Bioinformatics 3082:85-103, Springer, 2005....

  14. First experiences with the LHC BLM sanity checks

    OpenAIRE

    Emery, J; Dehning, B; Effinger, E; Nordt, A; Sapinski, M G; Zamantzas, C

    2010-01-01

    The reliability concerns have driven the design of the Large Hardron Collider (LHC) Beam Loss Monitoring (BLM) system from the early stage of the studies up to the present commissioning and the latest development of diagnostic tools. To protect the system against non-conformities, new ways of automatic checking have been developed and implemented. These checks are regularly and systematically executed by the LHC operation team to ensure that the system status is after each test "as good as ne...

  15. Assessment of diagnostic methods for determining degradation of check valves

    International Nuclear Information System (INIS)

    Haynes, H.D.; Farmer, W.S.

    1992-01-01

    The Oak Ridge National Laboratory (ORNL) has carried out a comprehensive aging assessment of check valves in support of the Nuclear Plant Aging Research (NPAR) program. This paper provides a summary of the ORNL check valve aging assessment with emphasis on the identification, evaluation, and application of check valve monitoring methods and techniques. Several check valve monitoring methods are described and compared. These methods include: acoustic emission monitoring, ultrasonic inspection, magnetic flux signature analysis (MFSA), external magnetics. These diagnostic technologies were shown to be useful in determining check valve condition (e.g., disc position, disc motion, and seat leakage), although none of the methods was by itself, successful in monitoring all three condition indicators. The combination of acoustic emission with either ultrasonics or one of the magnetic technologies, however, yields a monitoring system that succeeds in providing the sensitivity to detect all major check valve operating conditions. Other areas covered in the paper include descriptions of relevant regulatory issues, utility group activities, and interactions ORNL has had with outside organizations for the purpose of disseminating research results

  16. First experiences with the LHC BLM sanity checks

    Science.gov (United States)

    Emery, J.; Dehning, B.; Effinger, E.; Nordt, A.; Sapinski, M. G.; Zamantzas, C.

    2010-12-01

    The reliability concerns have driven the design of the Large Hardron Collider (LHC) Beam Loss Monitoring (BLM) system from the early stage of the studies up to the present commissioning and the latest development of diagnostic tools. To protect the system against non-conformities, new ways of automatic checking have been developed and implemented. These checks are regularly and systematically executed by the LHC operation team to ensure that the system status is after each test "as good as new". The sanity checks are part of this strategy. They are testing the electrical part of the detectors (ionisation chamber or secondary emission detector), their cable connections to the front-end electronics, further connections to the back-end electronics and their ability to request a beam abort. During the installation and in the early commissioning phase, these checks have shown their ability to find also non-conformities caused by unexpected failure event scenarios. In every day operation, a non-conformity discovered by this check inhibits any further injections into the LHC until the check confirms the absence of non-conformities.

  17. First experiences with the LHC BLM sanity checks

    International Nuclear Information System (INIS)

    Emery, J; Dehning, B; Effinger, E; Nordt, A; Sapinski, M G; Zamantzas, C

    2010-01-01

    The reliability concerns have driven the design of the Large Hardron Collider (LHC) Beam Loss Monitoring (BLM) system from the early stage of the studies up to the present commissioning and the latest development of diagnostic tools. To protect the system against non-conformities, new ways of automatic checking have been developed and implemented. These checks are regularly and systematically executed by the LHC operation team to ensure that the system status is after each test a s good as new . The sanity checks are part of this strategy. They are testing the electrical part of the detectors (ionisation chamber or secondary emission detector), their cable connections to the front-end electronics, further connections to the back-end electronics and their ability to request a beam abort. During the installation and in the early commissioning phase, these checks have shown their ability to find also non-conformities caused by unexpected failure event scenarios. In every day operation, a non-conformity discovered by this check inhibits any further injections into the LHC until the check confirms the absence of non-conformities.

  18. First experiences with the LHC BLM sanity checks

    Energy Technology Data Exchange (ETDEWEB)

    Emery, J; Dehning, B; Effinger, E; Nordt, A; Sapinski, M G; Zamantzas, C, E-mail: Jonathan.emery@cern.ch [CERN, CH-1211 Geneve 23 (Switzerland)

    2010-12-15

    The reliability concerns have driven the design of the Large Hardron Collider (LHC) Beam Loss Monitoring (BLM) system from the early stage of the studies up to the present commissioning and the latest development of diagnostic tools. To protect the system against non-conformities, new ways of automatic checking have been developed and implemented. These checks are regularly and systematically executed by the LHC operation team to ensure that the system status is after each test {sup a}s good as new{sup .} The sanity checks are part of this strategy. They are testing the electrical part of the detectors (ionisation chamber or secondary emission detector), their cable connections to the front-end electronics, further connections to the back-end electronics and their ability to request a beam abort. During the installation and in the early commissioning phase, these checks have shown their ability to find also non-conformities caused by unexpected failure event scenarios. In every day operation, a non-conformity discovered by this check inhibits any further injections into the LHC until the check confirms the absence of non-conformities.

  19. Double checking medicines: defence against error or contributory factor?

    Science.gov (United States)

    Armitage, Gerry

    2008-08-01

    The double checking of medicines in health care is a contestable procedure. It occupies an obvious position in health care practice and is understood to be an effective defence against medication error but the process is variable and the outcomes have not been exposed to testing. This paper presents an appraisal of the process using data from part of a larger study on the contributory factors in medication errors and their reporting. Previous research studies are reviewed; data are analysed from a review of 991 drug error reports and a subsequent series of 40 in-depth interviews with health professionals in an acute hospital in northern England. The incident reports showed that errors occurred despite double checking but that action taken did not appear to investigate the checking process. Most interview participants (34) talked extensively about double checking but believed the process to be inconsistent. Four key categories were apparent: deference to authority, reduction of responsibility, automatic processing and lack of time. Solutions to the problems were also offered, which are discussed with several recommendations. Double checking medicines should be a selective and systematic procedure informed by key principles and encompassing certain behaviours. Psychological research may be instructive in reducing checking errors but the aviation industry may also have a part to play in increasing error wisdom and reducing risk.

  20. PROFICIENCY IN ENGLISH AND CAREER OPPORTUNITIES IN THE LABOUR MARKET

    Directory of Open Access Journals (Sweden)

    SIMION MINODORA OTILIA

    2013-08-01

    Full Text Available The technological development, the growing economic globalization and the majordemographic shifts have brought about the need for a global language. In international business, travel, scienceand technology, education, immigration, academia, diplomacy and entertainment, English is the dominantlanguage, being spoken by over one billion people. English is used inside and outside the professionalenvironment, both for communication in global business and for communication in social networks, butproficiency in English can definitely enhance people’s career opportunities both if they look for a job in thecountry or plan to go abroad to find employment. It may determine a division among those who have access toinformation and prosperity and those who don’t. In the future not just wealth but also the way it is created willhave a great impact on people’s increasing communicative needs of international languages. It is obvious thenthat more and more people will need proficiency in English ,both as a language for international communicationand as the basis for constructing cultural identities .