WorldWideScience

Sample records for innovative mior process

  1. Innovative MIOR Process Utilizing Indigenous Reservoir Constituents

    Energy Technology Data Exchange (ETDEWEB)

    D. O. Hitzman; A. K. Stepp; D. M. Dennis; L. R. Graumann

    2003-03-31

    This research program is directed at improving the knowledge of reservoir ecology and developing practical microbial solutions for improving oil production. The goal is to identify indigenous microbial populations which can produce beneficial metabolic products and develop a methodology to stimulate those select microbes with nutrient amendments to increase oil recovery. This microbial technology has the capability of producing multiple oil-releasing agents. Experimental laboratory work is underway. Microbial cultures have been isolated from produced water samples. Comparative laboratory studies demonstrating in situ production of microbial products as oil recovery agents were conducted in sand packs with natural field waters with cultures and conditions representative of oil reservoirs. Field pilot studies are underway.

  2. INNOVATIVE MIOR PROCESS UTILIZING INDIGENOUS RESERVOIR CONSTITUENTS

    Energy Technology Data Exchange (ETDEWEB)

    D.O. Hitzman; A.K. Stepp; D.M. Dennis; L.R. Graumann

    2003-09-01

    This research program was directed at improving the knowledge of reservoir ecology and developing practical microbial solutions and technologies for improving oil production. The goal was to identify and utilize indigenous microbial populations which can produce beneficial metabolic products and develop a methodology to stimulate those select microbes with nutrient amendments to increase oil recovery. This microbial technology has the capability of producing multiple oil-releasing agents. Experimental laboratory work in model sandpack cores was conducted using microbial cultures isolated from produced water samples. Comparative laboratory studies demonstrating in situ production of microbial products as oil recovery agents were conducted in sand packs with natural field waters using cultures and conditions representative of oil reservoirs. Increased oil recovery in multiple model sandpack systems was achieved and the technology and results were verified by successful field studies. Direct application of the research results has lead to the development of a feasible, practical, successful, and cost-effective technology which increases oil recovery. This technology is now being commercialized and applied in numerous field projects to increase oil recovery. Two field applications of the developed technology reported production increases of 21% and 24% in oil recovery.

  3. Innovative MIOR Process Utilizing Indigenous Reservoir Constituents

    Energy Technology Data Exchange (ETDEWEB)

    Hitzman, D.O.; Stepp, A.K.

    2003-02-11

    This research program was directed at improving the knowledge of reservoir ecology and developing practical microbial solutions for improving oil production. The goal was to identify indigenous microbial populations which can produce beneficial metabolic products and develop a methodology to stimulate those select microbes with inorganic nutrient amendments to increase oil recovery. This microbial technology has the capability of producing multiple oil-releasing agents. The potential of the system will be illustrated and demonstrated by the example of biopolymer production on oil recovery.

  4. Innovative MIOR Process Utilizing Indigenous Reservoir Constituents

    Energy Technology Data Exchange (ETDEWEB)

    Hitzman, D.O.; Stepp, A.K.; Dennis, D.M.; Graumann, L.R.

    2003-02-11

    This research program was directed at improving the knowledge of reservoir ecology and developing practical microbial solutions for improving oil production. The goal was to identify indigenous microbial populations which can produce beneficial metabolic products and develop a methodology to stimulate those select microbes with inorganic nutrient amendments to increase oil recovery. This microbial technology has the capability of producing multiple oil-releasing agents.

  5. Innovative MIOR Process Utilizing Indigenous Reservoir Constituents

    Energy Technology Data Exchange (ETDEWEB)

    Hitzman, D.O.; Bailey, S.A.; Stepp, A.K.

    2003-02-11

    This research program was directed at improving the knowledge of reservoir ecology and developing practical microbial solutions for improving oil production. The goal was to identify indigenous microbial populations which can produce beneficial metabolic products and develop a methodology to stimulate those select microbes with inorganic nutrient amendments to increase oil recovery. This microbial technology has the capability of producing multiple oil releasing agents. The potential of the system will be illustrated and demonstrated by the example of biopolymer production on oil recovery.

  6. INNOVATIVE MIOR PROCESS UTILIZING INDIGENOUS RESERVOIR CONSTITUENTS

    Energy Technology Data Exchange (ETDEWEB)

    D.O. Hitzman; S.A. Bailey

    2000-01-01

    This research program is directed at improving the knowledge of reservoir ecology and developing practical microbial solutions for improving oil production. The goal is to identify indigenous microbial populations which can produce beneficial metabolic products and develop a methodology to stimulate those select microbes with inorganic nutrient amendments to increase oil recovery.This microbial technology has the capability of producing multiple oil releasing agents. The potential of the system will be illustrated and demonstrated by the example of biopolymer production on oil recovery. Research has begun on the program and experimental laboratory work is underway. Polymer-producing cultures have been isolated from produced water samples and initially characterized. Concurrently, a microcosm scale sand-packed column has been designed and developed for testing cultures of interest, including polymer-producing strains. In research that is planned to begin in future work, comparative laboratory studies demonstrating in situ production of microbial products as oil recovery agents will be conducted in sand pack and cores with synthetic and natural field waters at concentrations, flooding rates, and with cultures and conditions representative of oil reservoirs.

  7. Innovation process

    DEFF Research Database (Denmark)

    Kolodovski, A.

    2006-01-01

    Purpose of this report: This report was prepared for RISO team involved in design of the innovation system Report provides innovation methodology to establish common understanding of the process concepts and related terminology The report does not includeRISO- or Denmark-specific cultural, econom...

  8. MIOR - Microbial Improved Oil Recovery. Basics studies on the suitability of microorganisms for improved oil recovery. Final report; MIOR - Microbial Improved Oil Recovery. Grundlagen der Eignung von Mikroorganismen fuer die Verbesserung der Erdoelgewinnung. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Naeveke, R. [Technische Univ. Braunschweig (Germany). Inst. fuer Mikrobiologie; Fischer, K. [Technische Univ. Braunschweig (Germany). Inst. fuer Mikrobiologie; Timmis, K.N. [Gesellschaft fuer Biotechnologische Forschung mbH, Braunschweig (Germany); Yakimov, M. [Gesellschaft fuer Biotechnologische Forschung mbH, Braunschweig (Germany); Kroeger, A. [Gesellschaft fuer Biotechnologische Forschung mbH, Braunschweig (Germany); Bosecker, K. [Bundesanstalt fuer Geowissenschaften und Rohstoffe, Hannover (Germany); Kruckemeyer, I. [Bundesanstalt fuer Geowissenschaften und Rohstoffe, Hannover (Germany); Mengel-Jung, G. [Bundesanstalt fuer Geowissenschaften und Rohstoffe, Hannover (Germany); Bock, M. [Bundesanstalt fuer Geowissenschaften und Rohstoffe, Hannover (Germany); Schink, B. [Konstanz Univ. (Germany). Fachgebiet Mikrobielle Oekologie; Denger, K. [Konstanz Univ. (Germany). Fachgebiet Mikrobielle Oekologie; Kessel, D. [Institut fuer Erdoel- und Erdgasforschung, Clausthal-Zellerfeld (Germany); Amro, M. [Institut fuer Erdoel- und Erdgasforschung, Clausthal-Zellerfeld (Germany); Jacobs, G. [Institut fuer Erdoel- und Erdgasforschung, Clausthal-Zellerfeld (Germany); Hoffmann, G.G. [Institut fuer Erdoel- und Erdgasforschung, Clausthal-Zellerfeld (Germany); Wagner, M. [Erdoel - Erdgas Gommern GmbH (Germany); Ziran, B. [Erdoel - Erdgas Gommern GmbH (Germany); Nowak, H.U. [Erdoel - Erdgas Gommern GmbH (Germany); Eins, I. [Erdoel - Erdgas Gommern GmbH (Germany); Rosenspiess, K. [Erdoel - Erdgas Gommern GmbH (Germany); Lungershausen, D. [Erdoel - Erdgas Gommern GmbH (Germany)

    1996-03-01

    Microbial improved oil recovery (MIOR) is the use of microorganisms or microbial products that are injected into the oil reservoir to improve oil flow. The aim of this project was the application of MIOR in case of clastic reservoir rocks of the type encountered typically in Northern Germany. Microorganisms were concentrated, insolated and characterized from samples that were taken from oil production wells, oil processing facilities and soil contaminated with hydrocarbons. More than 500 bacteria strains were investigated for ability to grow under anaerobic conditions, halotolerance, heat tolerance and production of substances that increase viscosity or are surface active. 39 strains were selected for specific tests and genetic investigations. The two bacteria strains Bacillus licheniformis BNP 29 and Sporohalobacter showed to the capable for MIOR. Dynamic flooding experiments were carried out under realistic reservoir conditions, in order to quantify the ability of the microorganisms to mobilize residual oil in place, as well as to investigate the oil mobilizing mechanisms in more detail. It could be shown that the injectivity and migration of the bacteria in porous media are ensured. The microorganisms are able to grow under reservoir conditions as present in oil reservoirs of Northern Germany. Their application in flooding experiments leads to a significant increase of oil recovery. The most important factors influencing the oil recovery are the reduction of the permeability of the reservoir pores and changes in the wettability because of the bacterial growth. A suitable nutrient medium with an acid buffer was developed for the application of MIOR in sandstone reservoirs. An executive summary is prublished in DGMK-Report 441-2/1. (orig.) [Deutsch] MIOR (microbial improved oil recovery)-Verfahren dienen dazu, den Entoelungsgrad einer Erdoellagerstaette durch den gezielten in-situ-Einsatz von geeigneten Mikroorganismen und deren Stoffwechselprodukten zu erhoehen

  9. MIOR - Microbial Improved Oil Recovery. Basic studies on the suitability of microorganisms for improved oil recovery. Executive summary; MIOR - Microbial Improved Oil Recocery. Grundlagen der Eignung von Mikroorganismen fuer die Verbesserung der Erdoelgewinnung. Kurzbericht

    Energy Technology Data Exchange (ETDEWEB)

    Naeveke, R. [Technische Univ. Braunschweig (Germany). Inst. fuer Mikrobiologie; Timmis, K.N. [Gesellschaft fuer Biotechnologische Forschung mbH, Braunschweig (Germany); Bosecker, K. [Bundesanstalt fuer Geowissenschaften und Rohstoffe, Hannover (Germany); Schink, B. [Konstanz Univ. (Germany). Fachgebiet Mikrobielle Oekologie; Kessel, D. [Institut fuer Erdoel- und Erdgasforschung, Clausthal-Zellerfeld (Germany); Wagner, M. [Erdoel - Erdgas Gommern GmbH (Germany); Tessmer, G. [Deutsche Wissenschaftliche Gesellschaft fuer Erdoel, Erdgas und Kohle e.V., Hamburg (Germany)

    1996-03-01

    Microbial improved oil recovery (MIOR) is the use of microorganisms or microbial products that are injected into the oil reservoir to improve oil flow. The aim of this project was the application of MIOR in case of clastic reservoir rocks of the type encountered typically in Nothern Germany. Microorganisms were concentrated, isolated and characterized from samples that were taken from oil production wells, oil processing facilities and soil contaminated with hydrocarbons. More than 500 bacteria strains were investigated for ability to grow under anaerobic conditions, halotolerance, heat tolerance and production of substances that increase viscosity or are surface active. 39 strains were selected for specific tests and genetic investigations. The two bacteria strains Bacillus licheniformis BNP 29 and Sporohalobacter showed to the capable for MIOR. Dynamic flooding experiments were carried out under realistic reservoir conditions, in order to quantify the ability of the microorganisms to mobilize residual oil in place, as well as to investigate the oil mobilizing mechanisms in more detail. It could be shown that the injectivity and migration of the bacteria in porous media are ensured. The microorganisms are able to grow under reservoir conditions as present in oil reservoirs of Nothern Germany. Their application in flooding experiments leads to a significant increase of oil recovery. The most important factors influencing the oil recovery are the reduction of the permeability of the reservoir pores and changes in the wettability because of the bacterial growth. A suitable nutrient medium with an acid buffer was developed for the application of MIOR in sandstone reservoirs. (orig.) [Deutsch] MIOR (microbial improved oil recovery)-Verfahren dienen dazu, den Entoelungsgrad einer Erdoellagerstaette durch den gezielten in-situ-Einsatz von geeigneten Mikroorganismen und deren Stoffwechselprodukten zu erhoehen. Ziel des Projektes war es, die Anwendbarkeit von MIOR

  10. Customer Innovation Process Leadership

    DEFF Research Database (Denmark)

    Lindgren, Peter; Jørgensen, Jacob Høj; Goduscheit, René Chester

    2007-01-01

    Innovation leadership has traditionally been focused on leading the companies' product development fast, cost effectively and with an optimal performance driven by technological inventions or by customers´ needs. To improve the efficiency of the product development process focus has been on diffe......Innovation leadership has traditionally been focused on leading the companies' product development fast, cost effectively and with an optimal performance driven by technological inventions or by customers´ needs. To improve the efficiency of the product development process focus has been...... on different types of organisational setup to the product development model and process. The globalization and enhanced competitive markets are however changing the innovation game and the challenge to innovation leadership Excellent product development innovation and leadership seems not any longer to enough...... another outlook to future innovation leadership - Customer Innovation Process Leadership - CIP-leadership. CIP-leadership moves the company's innovation process closer to the customer innovation process and discusses how companies can be involved and innovate in customers' future needs and lead...

  11. Logistics Innovation Process Revisited

    DEFF Research Database (Denmark)

    Gammelgaard, Britta; Su, Shong-Iee Ivan; Yang, Su-Lan

    2011-01-01

    Purpose – The purpose of this paper is to learn more about logistics innovation processes and their implications for the focal organization as well as the supply chain, especially suppliers. Design/methodology/approach – The empirical basis of the study is a longitudinal action research project...... that was triggered by the practical needs of new ways of handling material flows of a hospital. This approach made it possible to revisit theory on logistics innovation process. Findings – Apart from the tangible benefits reported to the case hospital, five findings can be extracted from this study: the logistics...... innovation process model may include not just customers but also suppliers; logistics innovation in buyer-supplier relations may serve as an alternative to outsourcing; logistics innovation processes are dynamic and may improve supplier partnerships; logistics innovations in the supply chain are as dependent...

  12. Frugal innovation process

    DEFF Research Database (Denmark)

    Hossain, Mokter; Levänen, Jarkko; Lindeman, Sara

    2017-01-01

    and another developed by an individual from the Gujarat, India. Using effectuation theory we find that there are some distinct differences between two categories regarding finance, access to science and technology, the motivation of innovators, options they have, actions they take, etc....... processes. Second, we show how individuals have very different understandings of frugal innovations as well as capacities and resources needed for the development of frugal innovations. Two prominent frugal innovation cases are used in this study. One innovation was developed by individuals from the USA...

  13. Perspectives on Innovation Processes

    NARCIS (Netherlands)

    Garud, R.; Tuertscher, P.R.; Van de Ven, A.H.

    2013-01-01

    Innovation is often thought of as an outcome. In this chapter, we review the literatures on innovation processes pertaining to the invention, development, and implementation of ideas. In particular, we explore how these processes unfold within firms, across multi-party networks, and within

  14. Evaluation of innovation processes

    Directory of Open Access Journals (Sweden)

    Jakub Tabas

    2012-01-01

    Full Text Available In present, innovations are spoken as an engine of the world economy because the innovations are transforming not only business entities but the whole industries. The innovations have become a necessity for business entities in order to survive on floating challenging markets. This way, innovations are driving force of companies’ performance. The problem which arises here is a question of measurement innovation’s effect on the financial performance of company or selection between two or more possible variants of innovation’s realization. Various authors which are focused on innovations processes are divided into two groups in their attitudes towards the question of influence of innovations on financial performance of companies. One group of the authors present the idea that any reliable measurement is not possible or efficient. The second group of authors present some methods theoretically applicable on this measurement but they base their approaches mostly on the methods of measurement of investments effectiveness or they suggest employment of indicators or ratios which wouldn’t be clearly connected with the outcome of innovation process. The aim of submitted article is to compare different approaches to evaluation of the innovation processes. The authors compare various approaches here and by use of analysis and synthesis, they determine their own method how to measure outcome of innovation process.

  15. Process innovation laboratory

    DEFF Research Database (Denmark)

    Møller, Charles

    2007-01-01

    to create a new methodology for developing and exploring process models and applications. The paper outlines the process innovation laboratory as a new approach to BPI. The process innovation laboratory is a comprehensive framework and a collaborative workspace for experimenting with process models....... The process innovation laboratory facilitates innovation by using an integrated action learning approach to process modelling in a controlled environment. The study is based on design science and the paper also discusses the implications to EIS research and practice......Most organizations today are required not only to operate effective business processes but also to allow for changing business conditions at an increasing rate. Today nearly every business relies on their enterprise information systems (EIS) for process integration and future generations of EIS...

  16. Staging Collaborative Innovation Processes

    DEFF Research Database (Denmark)

    Pedersen, Signe; Clausen, Christian

    Organisations are currently challenged by demands for increased collaborative innovation internally as well as with external and new entities - e.g. across the value chain. The authors seek to develop new approaches to managing collaborative innovative processes in the context of open innovation ...... the diverse matters of concern into a coherent product or service concept, and 2) in the same process move these diverse holders of the matters of concern into a translated actor network which carry or support the concept.......Organisations are currently challenged by demands for increased collaborative innovation internally as well as with external and new entities - e.g. across the value chain. The authors seek to develop new approaches to managing collaborative innovative processes in the context of open innovation...... and public private innovation partnerships. Based on a case study of a collaborative design process in a large electronics company the paper points to the key importance of staging and navigation of collaborative innovation process. Staging and navigation is presented as a combined activity: 1) to translate...

  17. Business Process Innovation using the Process Innovation Laboratory

    DEFF Research Database (Denmark)

    Møller, Charles

    for practical applications has not been identified. The aim of this paper is to establish a conceptual framework for business process innovation in the supply chain based on advanced enterprise systems. The main approach to business process innovation in this context is to create a new methodology for exploring...... process models and patterns of applications. The paper thus presents a new concept for business process innovation called the process innovation laboratory a.k.a. the ?-Lab. The ?-Lab is a comprehensive framework for BPI using advanced enterprise systems. The ?-Lab is a collaborative workspace...... for experimenting with process models and an explorative approach to study integrated modeling in a controlled environment. The ?-Lab facilitates innovation by using an integrated action learning approach to process modeling including contemporary technological, organizational and business perspectives....

  18. Processes of Institutional Innovation

    DEFF Research Database (Denmark)

    Boxenbaum, Eva; Acquier, Aurélien; Pinheiro, Rebecca

    of the economy when it comes to innovation, being perceived as mechanically responding to external (client) needs and as implementing innovations that originate elsewhere (Winch 1998, Harty 2008). Sustainable construction represents a remarkable break with this tradition with strong ambitions to boost...

  19. An investigation of innovation processes

    DEFF Research Database (Denmark)

    Kavin, Lone; Narasimhan, Ram

    2017-01-01

    This paper focuses on how the innovation-fostering practices of firms are influenced by industry clock-speed. Industry clock-speed influences investments in product and technology development, strategic priorities and innovation processes, and how a firm engages with its supply network to leverag...... integration and absorptive capacity. Our study informs both theory and practice of innovation-fostering practices in industries that differ in clock-speeds.......This paper focuses on how the innovation-fostering practices of firms are influenced by industry clock-speed. Industry clock-speed influences investments in product and technology development, strategic priorities and innovation processes, and how a firm engages with its supply network to leverage...... supplier knowledge and unique competencies. However, the literature suffers from insufficient discussion concerning how differences in industry clock-speed affect innovation-fostering practices and innovation performance of firms. We address this unexplored issue in this paper by means of a comparative...

  20. Innovation Processes and Closure

    DEFF Research Database (Denmark)

    Darsø, Lotte; Austin, Robert

    2009-01-01

    Artiklen beskriver, diskuterer og illustrerer en lang række forskellige innovationsprocesmodeller med fokus på hvordan (og hvornår) innovative teams håndterer at stoppe processen. Sommetider er der tale om forceret lukning fx pga deadlines eller andet, andre gange sker der en tydelig krystalliser......Artiklen beskriver, diskuterer og illustrerer en lang række forskellige innovationsprocesmodeller med fokus på hvordan (og hvornår) innovative teams håndterer at stoppe processen. Sommetider er der tale om forceret lukning fx pga deadlines eller andet, andre gange sker der en tydelig...

  1. Opening up the Innovation Process

    DEFF Research Database (Denmark)

    Vujovic, Sladjana; Ulhøi, John Parm

    2008-01-01

    An organization's ability to create, retrieve, and use knowledge to innovate is a critical strategic asset. Until recently, most textbooks on business and product development argued that managers should keep their new ideas to themselves and protect knowledge from getting into competitors' hands....... Seeking, developing, and protecting knowledge is a costly endeavour. Moreover, apart from being expensive, the process of turning new knowledge into useful and well-protected innovations often slows the speed of development and increases costs. In this chapter, alternative strategies for innovation......, in which sharing and co-operation play a critical part, are discussed. In particular, we address the involvement of users in opening up the innovation process which, in turn, offers participating actors some useful strategies for product development. Four archetypal strategies are identified and classified...

  2. Innovation process and innovativeness of facility management organizations

    NARCIS (Netherlands)

    Mudrak, T.; Wagenberg, van A.F.; Wubben, E.F.M.

    2005-01-01

    Purpose - The innovation patterns and processes in facility management (FM) organizations are crucial for the development of FM as a discipline, but they are not yet fully explored and understood. This paper aims to clarify FM innovation from the perspective of innovation processes and the

  3. Innovation Processes and Entrepreneurial Culture for Radical Innovations

    Directory of Open Access Journals (Sweden)

    Ľubica Knošková

    2015-02-01

    Full Text Available To survive and prosper, the organizations need to embed the processes and mechanisms to discover major technology and consumer trends and respond to them through new growth areas. Based on profound literature review providing insight into organizational factors that affect firms’ ability to manage innovation this paper asks which innovation processes and entrepreneurial culture support radical innovations. The aim of the paper is to specify the company behaviour that leads to innovative outputs with high level of novelty in country specific context of Slovakia. We conducted two-stage empirical research in 2009 and 2014 mapping companies’ approach to innovation management during the last 10 years. After surveying 102 firms in the first stage and 287 firms in the second stage we derive success factors for radical innovations. The findings demonstrate growing importance of corporate strategic orientation, highly developed innovation processes and parallel mechanisms for radical innovation, ability to manage internally and externally open innovation and support entrepreneurial culture. This study makes unique contribution to the understanding of innovation processes, organizational factors, and their significance and dynamics. It should attract managerial attention to recognize the importance of innovation management factors for building firm’s innovation competency.

  4. Network Dynamics of Innovation Processes

    Science.gov (United States)

    Iacopini, Iacopo; Milojević, Staša; Latora, Vito

    2018-01-01

    We introduce a model for the emergence of innovations, in which cognitive processes are described as random walks on the network of links among ideas or concepts, and an innovation corresponds to the first visit of a node. The transition matrix of the random walk depends on the network weights, while in turn the weight of an edge is reinforced by the passage of a walker. The presence of the network naturally accounts for the mechanism of the "adjacent possible," and the model reproduces both the rate at which novelties emerge and the correlations among them observed empirically. We show this by using synthetic networks and by studying real data sets on the growth of knowledge in different scientific disciplines. Edge-reinforced random walks on complex topologies offer a new modeling framework for the dynamics of correlated novelties and are another example of coevolution of processes and networks.

  5. LOGISTICS AS A PART OF INNOVATION PROCESS

    Directory of Open Access Journals (Sweden)

    Erika Loučanová

    2016-03-01

    Full Text Available The paper deals with the importance of logistics in innovation process. The issue is focused on management of different logistic processes building on the innovation and on innovation process. However, logistics is an essential part of this process. The results describe logistics chain within innovation process for the satisfaction of customers´ demand and fulfilment of customers’ requests on the innovation. This approach involves “7S of logistics” which means: “create proper innovation, in the proper quality, for the right place and in the right time, as well as, with the proper price and package”.

  6. EFFECT OF CORPORATE INNOVATION ABILITY ON THE CHOICE BETWEEN PRODUCT INNOVATION AND PROCESS INNOVATION

    OpenAIRE

    Zeng Wu; Tian Zhilong

    2010-01-01

    With the method of duopoly game theory, the effect of firms’ innovation ability on the choice between product and process innovation is studied. The concept of cost coefficient of product innovation is introduced, and the criterion equation for the innovation type is derived. The following conclusions are made: the more the product innovation ability, the more the possibility for the firms to carry out the product innovation in both the Bertrand and the Cournot competitions. Wi...

  7. Do Process Innovations Induce Product Ones?

    OpenAIRE

    Maria Rosa Battaggion; Piero Tedeschi

    2006-01-01

    We study the relationship between process and product innovations in vertically differentiated duopolies. A process innovation can lead two competing firms to improve the quality of their goods introducing a product innovation. In fact, a cost reducing innovation has two effects: it spurs production and it enhances price competition. The former effect induces both firms to increase quality. The latter encourages differentiation, inducing low quality firm to decrease it. Therefore, high qualit...

  8. STRATEGY FORMULATION PROCESS AND INNOVATION PERFORMANCE NEXUS

    Directory of Open Access Journals (Sweden)

    Chijioke Nwachukwu

    2018-03-01

    Full Text Available The purpose of this study is to examine the link between strategy formulation process and innovation performance indicators in microfinance banks in Nigeria (MFBs. 100 employees of leading microfinance banks were randomly selected for this study. 80 questionnaires were returned but only 76 were found usable for the analysis. Regression analysis technique was used in examining the nature of the relationships of the variables and for hypotheses testing. The authors used exploratory factor analysis and Cronbach's alpha to test for the validity and reliability of the questionnaires. The results show that strategy formulation process has a positive effect on process innovation performance, product innovation performance and marketing innovation performance. Thus, all the three hypotheses tested were supported. The authors, therefore, concludes that a systematic strategy formulation process is necessary for firms to achieve and sustain process innovation performance, product innovation performance and marketing innovation performance. This study proposed suggestion for further studies.

  9. Innovation Dialectics: An Extended Process Perspective on Innovation in Services

    DEFF Research Database (Denmark)

    Nardelli, Giulia

    2017-01-01

    Services are characterised by the involvement of customers and other interest groups in the innovation process. The aim of this study is to understand how and why, in the service context, tensions and potential conflicts between heterogeneous interest groups unfold during processes of innovation....... The empirical field in which the investigation was set is facility services, a type of business-to-business support services. The findings were extracted from a longitudinal, in-depth case study of a Danish, multi-national organisation over 13 years, complemented with an explorative study in the Danish facility...... service context. The findings suggest that tensions and conflicts between heterogeneous interest groups are an intrinsic element of innovation processes in services, and that emphasising them might actually support a clearer understanding of processes of innovation in services. The outcome of the analysis...

  10. Disruptive innovation as an entrepreneurial process

    NARCIS (Netherlands)

    Chandra, Y.; Yang, S.-J.S.; Singh, P.; Prajogo, D.; O'Neill, P.; Rahman, S.

    2008-01-01

    Research on conditions and causal mechanisms that influence disruptive innovation has been relatively unexplored in the extant research in disruptive innovation. By re-conceptualizing disruptive innovation as an entrepreneurial process at product, firm and industry levels, this paper draws on

  11. Business dominant position in innovation process

    OpenAIRE

    BABYCH T.O.

    2015-01-01

    In the international competitive environment innovative development acquires the special urgency for the nation. Innovation is no longer seen as a stochastic process. was The systematic implementation and stimulation of innovation have become the paradigm of economic development for the most of the world. It is important to form and to exploit new methodologies and tools for innovation policy. Such instruments should cover all the factors and results. So the large and small business should be...

  12. Innovation, what innovation? A comparison between product, process and organizational innovaton

    NARCIS (Netherlands)

    Boer, Harm; Boer, H.; During, W.E.

    2001-01-01

    This article compares and contrasts three types of innovations, namely, product innovation, process innovation and organisational innovation. From similarities and differences between these three types, implications for the theory and practice of innovation management are inferred. Most of these

  13. User involvement in the innovation process

    DEFF Research Database (Denmark)

    Christensen, Dan Saugstrup

    2008-01-01

    User involvement in the innovation process is not a new phenomenon. However, combined with the growing individualisation of demand and with highly competitive and dynamic environments, user involvement in the innovation process and thereby in the design, development, and manufacturing process, can...... nevertheless provide a competitive advantage. This is the case as an intensified user involvement in the innovation process potentially results in a more comprehensive understanding of the user needs and requirements and the context within which these are required, and thereby provides the possibility...... of developing better and more suitable products. The theoretical framework of this thesis is based on user involvement in the innovation process and how user involvement in the innovation process can be deployed in relation to deriving and colleting user needs and requirements, and thereby serves...

  14. Innovation drivers and barriers in food processing

    NARCIS (Netherlands)

    Fortuin, F.T.J.M.; Omta, S.W.F.

    2009-01-01

    Purpose - The food processing industry, confronted with increased global competition and more stringent customer demands, is pressurized to improve the pace and quality of its innovation processes. This paper aims to find out what factors constitute the main drivers and barriers to innovation and to

  15. Innovative Applications in Radiation Processing

    International Nuclear Information System (INIS)

    Vroom, D.A.

    2006-01-01

    Prior to acquisition by Tyco International, Raychem Corporation initiated several programs to develop new products, reduce the production cost of existing products and identify new market areas that would utilize the skills available in the company in the area of radiation chemistry and radiation technology. Several areas were considered including radiation initiation of specific chemical reactions in polymers at high temperatures, the use of purpose built irradiation equipment for low cost production of specific high volume products and environmental remediation of ground or waste water. In this regard, the Corporation supported a program to improve how material is processed through an electron accelerator and to develop specific equipment to utilize these improvements. The goal was to make the radiation process a single entity as opposed to an accelerator and a material handling system. This paper discusses some of the developments from this program. In the area of radiation induced chemical reactions in polymers at elevated temperatures, a robust accelerator was developed that would allow the irradiation of polymeric materials in the melt as they exited forming equipment such as plastics extruders. Here the goal was to have a low energy, self shielded accelerator in the 300 KeV to 500 KeV range in which extruded polymeric material could be immediately processed in a single pass at melt temperature before it was cooled and allowed to encounter any surfaces. Two machines that met these criteria were constructed and will be discussed. Several of the innovations coming from the high processing temperature, single pass accelerator project were incorporated into the development of purpose built machines to process specific existing products such as wire and heat shrink tubing. Here the goal was to have machines with the minimum acceptable electron energy and compact shielding to reduce cost and foot print. Beam scanning technology developed will be discussed. A major

  16. Enacting outsourcing: An innovation process perspective

    Directory of Open Access Journals (Sweden)

    Benedikte Borgström

    2010-11-01

    Full Text Available Much research has been done on outsourcing. However, we still know little about outsourcing based on a social process view on innovation. Outsourcing is an innovation as a logistics-related process that is perceived as new by the adopter. We will explore and analyse an outsourcing idea, its development and implementation, from an innovation perspective. The development is studied in a qualitative, long-term process study. The analysis draws on Hoholm’s (2009 model of innovation processes. It extends the applicability of this innovation model and its methodology of following the action into logistics and supply chain management (SCM research. The outsourcing process is an innovation that develops in a rational way based on the incremental process because of its actor-network and simultaneous reflection. Interactions and confrontations come about because of involved contrary forces such as competing objectives. The model explains the practice of SCM innovation and increases the understanding of dynamics and complexity. The process study brings insights to cause-effect relations in the development of outsourcing that are consequential to innovative logistics and SCM.

  17. Introduction to Innovative Food Processing and Technology

    OpenAIRE

    Tokusoglu, Ozlem

    2015-01-01

    Consumers, the food industry and the regulatory agencies demand the innovative technologies to provide safe and stable foods. Nonthermal processing technologies offer unprecedented opportunities and challenges for the food industry to market safe, high quality health-promoting foods. Those innovative food processing is often perceived as an alternative to thermal food processing, yet there are many nonthermal preparatory unit operations as well as food processing and preservation opportunitie...

  18. Intermediaries in the Management Process of Innovation

    DEFF Research Database (Denmark)

    Gretzinger, Susanne; Hinz, Holger; Matiaske, Wenzel

    2012-01-01

    Information is a critical resource in innovation processes. SMEs are therefore advised to draw on consulting in innovation processes, as they cannot ensure the necessary information flow internally due to lesser resources. From the strategic point of view, the involvement of intermediaries is acc...... is accompanied by the risk of losing specific knowledge to the business environment. But the other way around: To neglect the integration of consultancies could mean a deficit in the process of information management.......Information is a critical resource in innovation processes. SMEs are therefore advised to draw on consulting in innovation processes, as they cannot ensure the necessary information flow internally due to lesser resources. From the strategic point of view, the involvement of intermediaries...

  19. INNOVATION PROCESS IN OPEN CAPITAL BRAZILIAN COMPANIES

    Directory of Open Access Journals (Sweden)

    Ricardo Floriani

    2013-12-01

    Full Text Available This study aims to identify the innovation process used by the open capital Brazilian companies and establish a ranking of the potentially innovative ones. For this, a questionnaire was sent to 484 companies with shares traded in Bovespa, receiving a response from 22. The innovation process is based on the model of Barrett and Sexton (2006. A summary of the results is presented below. (i Organizational Capabilities – 95.5% answered that they have incentives for innovation activities and 68.2% reported having procedures for all services. The leadership has a facilitator role encouraging the initiative (86.4% and promotes the maintenance of the group relationship (72.7%. Value risk taking, even through failures and prioritize the learning and experimenting new ideas. (ii Background of the innovation – reveals aspects of the capacity (internal or (external. Of the respondents, 59.1% developed internal activities of continuing P & D. Training to innovate is present in a continuous or occasional basis in 81.8% of the companies. The respondents characterize the economic environment as dynamic and the majority purchased software and equipments. In only 12 opportunities was a reference to obtaining patents as innovation protection measure. (iii Focus of innovation – the majority of the companies mentioned process or product innovation. Rewards are offered when the objectives are met and it is brought to attention when this does not occur. (iv Highlighted performance – the innovations achieved the expectations and created effects. The relevant benefits noticed were: improvement in quality of goods and services, increase of market share, increase of goods and services, and increase of productive capacity.

  20. Chemical and biological monitoring of MIOR on the pilot area of Vyngapour oil field, West Sibera, Russia

    Energy Technology Data Exchange (ETDEWEB)

    Arinbasarov, M.U.; Murygina, V.P.; Mats, A.A.

    1995-12-31

    The pilot area of the Vyngapour oil field allotted for MIOR tests contains three injection and three producing wells. These wells were treated in summer 1993 and 1994. Before, during, and after MIOR treatments on the pilot area the chemical compounds of injected and formation waters were studied, as well as the amount and species of microorganisms entering the stratum with the injected water and indigenous bacteria presented in bottomhole zones of the wells. The results of monitoring showed that the bottomhole zone of the injection well already had biocenosis of heterotrophic, hydrocarbon-oxidizing, methanogenic, and sulfate-reducing bacteria, which were besides permanently introduced into the reservoir during the usual waterflooding. The nutritious composition activated vital functions of all bacterial species presented in the bottomhole zone of the injection well. The formation waters from producing wells showed the increase of the content of nitrate, sulfate, phosphate, and bicarbonate ions by the end of MIOR. The amount of hydrocarbon-oxidizing bacteria in formation waters of producing wells increased by one order. The chemical and biological monitoring revealed the activation of the formation microorganisms, but no transport of food industry waste bacteria through the formation from injection to producing wells was found.

  1. User Driven Innovation in the Building Process

    DEFF Research Database (Denmark)

    Christiansson, Per; Sørensen, Kristian Birch; Rødtness, Mette

    2008-01-01

    During the late years there has been an ever-increasing focus on the possibilities to change the building process to raise quality on the final building products as well as the activities of actors involved in the building process. One reason for this interest is the new opportunities evolving du...... building design. A general methodological framework and meta ontology for Virtual Innovation in Construction is presented as well as findings from implementation of the method....... to introduction of advanced information and communication technology (ICT). The paper focuses on creative changes of the building process powered by user driven innovation activities. An overview of existing user driven innovation methodologies is given as well experiences from the ongoing Virtual Innovation...

  2. Research and Innovation Processes revisited

    DEFF Research Database (Denmark)

    Timmermans, Job; Yaghmaei, Emad; Carsten Stahl, Bernd

    2017-01-01

    Purpose: The purpose of this paper is to explore how relationships between different actors are being shaped to allow industry to come to acceptable and desirable uses of research and innovation (R&I) that address societal challenges. Design/methodology/approach: Building on existing notions...... of responsibility proposed in the literature, the paper develops a theoretical account of “networks of responsibility” which capture the interlinked nature of responsibility relationships. The usefulness of the approach is evaluated by exploring two cases of R&I in industry deploying a qualitative research approach...... supports translating RRI principles into everyday organisational practices. Social implications: RRI sets an ambitious agenda to ensure a more social and ethical R&I. Much work is still needed to bridge the gap between these theoretical and political aspirations and daily R&I practice, especially in non...

  3. Knowledge adquisition strategies in firm innovation processes

    OpenAIRE

    Vega Jurado, Jaider; Gutiérrez Gracia, Antonio; Fernández de Lucio, Ignacio

    2009-01-01

    The recognition of external agents as an important knowledge source to innovation processes means that the firms must face a key decision: generate in-house or acquire externally the required technological knowledge. Owing to its implications, this decision has become a very important topic between academics and practitioners of innovation, promoting the development of a body of theoretical and empirical literature about the factors and motivations which influence it. This paper provides a re...

  4. Policy and process of innovation in techniques

    International Nuclear Information System (INIS)

    Kim, In Su; Lee, Jin Ju

    1982-09-01

    This book mentions policy and process of innovation in techniques, which deals with introduction, macroscopic analysis of development of science and technology including analysis of existing research about system of development on science and technology and new development system of science and technology, macroscopic analysis of development of science and technology of Korea. It also indicates innovation of technology in Korean industry with various access.

  5. TEXACO GASIFICATION PROCESS - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    This report summarizes the evaluation of the Texaco Gasification Process (TGP) conducted under the U.S. Environmental Protection Agency (EPA) Superfund Innovative Technology Evaluation (SITE) Program. The Texaco Gasification Process was developed by Texaco Inc. The TGP is a comm...

  6. RELATIONSHIP MARKETING IN THE INNOVATION PROCESSES

    Directory of Open Access Journals (Sweden)

    Rodica Boier

    2013-12-01

    Full Text Available Inspired from the context of business-to-business markets, relationship marketing in the context of innovation have been expanded more and more to the consumer markets as well. The paper starts with a review of several most relevant studies on relationship marketing-innovation topic, from the first references to the current complex approaches. The effective stakeholder involvement in the value creation provides a more fertile ground for further successful innovations. All of the variables generating the success of a relationship marketing approach – trust, commitment, communication, seller’s customer orientation and empathy, experience and satisfaction a.s.o. – are also involved, with specific particularities, in the management of the innovation and new product development processes. The paper also outline the different perspectives to understand the relationship marketing-innovation approaches, coming from the product type, its business-to-business or business-to-consumer settings, the specific industry, the actual stage of the market evolution – emerging or mature –, the level of technological novelty as dimension of technological uncertainty, the position/ status and role of stakeholders as part in the relationships, the state of the new product development process in which the interactions occurs or special issues like sustainable innovation, for profit and not-for-profit areas etc.

  7. Business Process Innovation: The LEGO Case

    DEFF Research Database (Denmark)

    Møller, Charles; Hansen, P.K.

    2006-01-01

    Most organizations today are required not only to establish effective business processes but they are required to accommodate for changing business conditions at an increasing rate. Many business processes extend beyond the boundary of the enterprise into the supply chain and the information...... process innovation (BPI) in future organizations. This paper explores the applicability of one particular methodology for Business Process Innovation to deal with the challenge that the LEGO organization is facing with the alignment of their product development process and their supply chain. The paper...... infrastructure therefore is critical. Today nearly every business relies on their Enterprise System (ES) for process integration and the future generations of Enterprise Systems will increasingly be driven by business process models. Consequently process modelling and improvement will become vital for business...

  8. The Conceptual Framework for Business Process Innovation

    DEFF Research Database (Denmark)

    Møller, Charles

    This paper proposes a research program on Business Process Innovation: Towards Global Supply Chain Intelligence. Few words are more ubiquitous in business or society today than "innovation". This reflects that businesses are striving for ways to survive and thrive in an increasingly complex...... and connected world (IBM 2006). Most industrial supply chains today are globally scattered and nearly all organizations rely on their Enterprise Information Systems (ES) for integration and coordination of their activities. In this context innovation inevitably is driven by advanced information technology....... Organizations today are required not only to operate effective business processes but they also need to accommodate to changing business conditions at an increasing rate. Consequently the ability to develop and implement new processes driven by the Enterprise Information Systems is a central competence in most...

  9. Exploring IT roles in business process innovation

    DEFF Research Database (Denmark)

    Gong, Jie; Møller, Charles

    2013-01-01

    This paper explores the relationships between IT and Business process innovation (BPI) through examining IT roles in the processes of BPI. BPI is an innovative activity in business which has been paying more attention in recent years. However it is often confused with other process......-orientation concepts, such as Business process management (BPM) and Business process reengineering (BPR). The paper aims to find out two research questions: 1) How do we understand the meanings of BPI in the current background of economic globalization? 2) What IT roles are in the process of BPI? Based on finding...... the answer to these two questions, the definition of BPI in academia and the relationships with other popular process-orientation activities in practice are reviewed, then a framework of comprehensive understanding of BPI is put forward, and thereafter the interactions between IT and BPI are explored...

  10. Standardising Software Processes - An Obstacle for Innovation?

    DEFF Research Database (Denmark)

    Aaen, Ivan; Pries-Heje, Jan

    2004-01-01

    Over the last 10 years CMM has achieved widespread use as a model for improving software organisations. Often CMM is used to standardise software processes across projects. In this paper we discuss this standardisation of SPI in relation to innovation, organisational size and company growth. Our...... discussion is empirically based on years work and experience working with companies on SPI. In the concrete our discussion is enhanced by vignette stories taken from our experience. As a result we find that standardisation focussing on process, metrics, and controls may jeopardize innovative capabilities...

  11. Opening up the innovation process: archetypal strategies

    DEFF Research Database (Denmark)

    Vujovic, Sladjana; Ulhøi, John Parm

    2005-01-01

    sharing and co-operation play a critical part. The paper addresses the involvement of users in opening up the innovation process, which in turn gives the participating actors an interesting alternative for product development. We identify and classify four archetypal strategies for opening up...

  12. Public Leadership and processes of societal innovations

    NARCIS (Netherlands)

    Termeer, C.J.A.M.

    2007-01-01

    Societal actors can come against problems that cross the traditional boundaries of sectors, organisations and routines. Processes of societal innovation are started on the way to an unknown future, creating new solutions and new corporations. In this paper I focus on the question how public leaders

  13. Innovative Canadian Process Technology For Biodiesel Production

    Energy Technology Data Exchange (ETDEWEB)

    Johar, Sangat; Norton, Kevin

    2010-09-15

    The need for increasing renewable and alternative energy in the global energy mix has been well recognized by Governments and major scientific forums to reduce climate change impact for this living planet. Biodiesel has very high potential for GHG emission reduction. An innovative process developed in Canada provides solution to mitigate the feedstock, yield and quality issues impacting the industry. The Biox process uses a continuous process which reduces reaction times, provides > 99% yield of high quality biodiesel product. The process is feedstock flexible and can use cheaper higher FFA feedstock providing a sustainable approach for biodiesel production.

  14. Opening up the Agile Innovation Process

    Science.gov (United States)

    Conboy, Kieran; Donnellan, Brian; Morgan, Lorraine; Wang, Xiaofeng

    The objective of this panel is to discuss how firms can operate both an open and agile innovation process. In an era of unprecedented changes, companies need to be open and agile in order to adapt rapidly and maximize their innovation processes. Proponents of agile methods claim that one of the main distinctions between agile methods and their traditional bureaucratic counterparts is their drive toward creativity and innovation. However, agile methods are rarely adopted in their textbook, "vanilla" format, and are usually adopted in part or are tailored or modified to suit the organization. While we are aware that this happens, there is still limited understanding of what is actually happening in practice. Using innovation adoption theory, this panel will discuss the issues and challenges surrounding the successful adoption of agile practices. In addition, this panel will report on the obstacles and benefits reported by over 20 industrial partners engaged in a pan-European research project into agile practices between 2006 and 2009.

  15. Crowd innovation : The role of uncertainty for opening up the innovation process in the public sector

    OpenAIRE

    Collm, Alexandra; Schedler, Kuno

    2011-01-01

    Innovations are complex processes that can be created internally, caused externally or generated collectively with stakeholders. Integrating crowdsourcing and open innovation and supported by Web 2.0 technologies, a new innovation practice, crowd innovation, has emerged. In this paper, we illustrate empirically the practice of crowd innovation and discuss institutional obstacles, which exist for implementing crowd innovation in the public sector. Referring to the normative mode of publicness ...

  16. Sources of Information as Determinants of Product and Process Innovation.

    Science.gov (United States)

    Gómez, Jaime; Salazar, Idana; Vargas, Pilar

    2016-01-01

    In this paper we use a panel of manufacturing firms in Spain to examine the extent to which they use internal and external sources of information (customers, suppliers, competitors, consultants and universities) to generate product and process innovation. Our results show that, although internal sources are influential, external sources of information are key to achieve innovation performance. These results are in line with the open innovation literature because they show that firms that are opening up their innovation process and that use different information sources have a greater capacity to generate innovations. We also find that the importance of external sources of information varies depending on the type of innovation (product or process) considered. To generate process innovation, firms mainly rely on suppliers while, to generate product innovation, the main contribution is from customers. The potential simultaneity between product and process innovation is also taken into consideration. We find that the generation of both types of innovation is not independent.

  17. Sources of Information as Determinants of Product and Process Innovation.

    Directory of Open Access Journals (Sweden)

    Jaime Gómez

    Full Text Available In this paper we use a panel of manufacturing firms in Spain to examine the extent to which they use internal and external sources of information (customers, suppliers, competitors, consultants and universities to generate product and process innovation. Our results show that, although internal sources are influential, external sources of information are key to achieve innovation performance. These results are in line with the open innovation literature because they show that firms that are opening up their innovation process and that use different information sources have a greater capacity to generate innovations. We also find that the importance of external sources of information varies depending on the type of innovation (product or process considered. To generate process innovation, firms mainly rely on suppliers while, to generate product innovation, the main contribution is from customers. The potential simultaneity between product and process innovation is also taken into consideration. We find that the generation of both types of innovation is not independent.

  18. Sources of Information as Determinants of Product and Process Innovation

    Science.gov (United States)

    2016-01-01

    In this paper we use a panel of manufacturing firms in Spain to examine the extent to which they use internal and external sources of information (customers, suppliers, competitors, consultants and universities) to generate product and process innovation. Our results show that, although internal sources are influential, external sources of information are key to achieve innovation performance. These results are in line with the open innovation literature because they show that firms that are opening up their innovation process and that use different information sources have a greater capacity to generate innovations. We also find that the importance of external sources of information varies depending on the type of innovation (product or process) considered. To generate process innovation, firms mainly rely on suppliers while, to generate product innovation, the main contribution is from customers. The potential simultaneity between product and process innovation is also taken into consideration. We find that the generation of both types of innovation is not independent. PMID:27035456

  19. Mapping innovation processes: Visual techniques for opening and presenting the black box of service innovation processes

    DEFF Research Database (Denmark)

    Olesen, Anne Rørbæk

    2017-01-01

    This chapter argues for the usefulness of visual mapping techniques for performing qualitative analysis of complex service innovation processes. Different mapping formats are presented, namely, matrices, networks, process maps, situational analysis maps and temporal situational analysis maps....... For the purpose of researching service innovation processes, the three latter formats are argued to be particularly interesting. Process maps can give an overview of different periods and milestones in a process in one carefully organized location. Situational analysis maps and temporal situational analysis maps...... can open up complexities of service innovation processes, as well as close them down for presentational purposes. The mapping formats presented are illustrated by displaying maps from an exemplary research project, and the chapter is concluded with a brief discussion of the limitations and pitfalls...

  20. Family Assets and Liabilities in the Innovation Process

    DEFF Research Database (Denmark)

    Bennedsen, Morten; Foss, Nicolai Juul

    2015-01-01

    Innovation in family firms is often driven by family assets, valuable resources that are particularly prevalent in family firms. For example, they have particularly strong networks that can be deployed in an innovation context. These family assets can over time atrophy and stifle rather than...... stimulate innovation performance. However, family firms can fight this process by institutionalizing innovation within the family and the firm by means of family and corporate governance and through incentivizing key individuals in the innovation process....

  1. Research on process management of nuclear power technological innovation

    International Nuclear Information System (INIS)

    Yang Hua; Zhou Yu

    2005-01-01

    Different from the other technological innovation processes, the technological innovation process of nuclear power engineering project is influenced deeply by the extensive environmental factors, the technological innovation of nuclear power engineering project needs to make an effort to reduce environmental uncertainty. This paper had described the mechanism of connection technological innovation process of nuclear power engineering project with environmental factors, and issued a feasible method based on model of bargaining to incorporate technological innovation process management of nuclear power engineering project with environmental factors. This method has realistic meanings to guide the technological innovation of nuclear power engineering project. (authors)

  2. Auditing of Innovation Process: a case study in Inmetro

    Directory of Open Access Journals (Sweden)

    Vanessa Lage Bellazzi de Pellegrini

    2014-04-01

    Full Text Available The main objective of the research was to describe the contribution of the audit for the INMETRO innovation process. The intermediate objectives sought to characterize the innovation process INMETRO; identify the procedures and instruments used by the institute in the auditing of the innovation process, and describe the influence of the auditing in the development of two innovations by INMETRO. As a secondary objective the INMETRO innovation process was evaluated by using the evaluation model of Tidd, Bessant & Pavitt (2008.The research method was a single case study with a descriptive purpose. Semistructured interviews with eight employees working with audit and control as well as narratives of two innovations by employees who closely followed the development of innovations were used for data collection. The collected data were treated by means of content analysis. The survey results indicated that neither the innovation process nor the process innovation audit is institutionalized in INMETRO. This makes each main unit of the institute develop innovations according to a viewpoint itself. The absence of reports of audit processes of innovation management with suggestions for improvements in the processes of innovation, and the few references to issues related to audit on the accounts obtained during narratives of development of the innovations surveyed show that the influence of management innovation audit is still small in INMETRO. This is compounded by the fact that management innovation audit is still in its infancy. Paradoxically the legitimate concern of the Institute with normalization may be harming the correct understanding of what would be the appropriate procedures and instruments to an innovation audit. While not referring directly to the question innovation, often appear reports of respondents complaining of excessive standards.

  3. Innovation

    DEFF Research Database (Denmark)

    Nielsen, Janni; Yaganeh, Suzanne; Bloch Rasmussen, Leif

    2013-01-01

    This paper contributes to a theoretical discussion of creation of innovation with participants in, or outside, organisations. We address the creation of innovation with a complex theoretical understanding drawing on the Scandinavian and the Participatory Design tradition introducing two approaches...... to the processes of innovation. We ask if innovation can be initiated and enhanced looking at two collaborative approaches; participatory innovation (PIN) and cooperative innovation (COIN). We invite to dialogue and reflections on PIN’s conflict and creative frictions on one side and COIN’s complexity......, complementarity in diversity and the didactic scaffolding of the innovation process on the other side. Our contribution focuses on the methods and practices for facilitation of co-creating activities between different groups leading to cooperation, and innovation in thinking....

  4. Cross-industry innovation processes strategic implications for telecommunication companies

    CERN Document Server

    Hahn, Tobias

    2015-01-01

    Based on multiple case study analysis, focusing on scalable service innovation, the present study provides a practical process model that shall serve telecommunication companies as a guideline while conducting strategic cross-industry innovation projects. The findings also pay attention to characteristics in cross-industry collaboration, organizational preconditions and strategic deliberations and postulate propositions for present theoretical innovation process models.

  5. A Review of the Literature on Process Innovation in Remanufacturing

    Directory of Open Access Journals (Sweden)

    Huriye Sabancı Özer

    2012-07-01

    Full Text Available The aim of this article is to present a concise review of the relationship between environmental sustainability, environmental innovation and remanufacturing. In the past, corporate environment was accounted as an environment determining the firm performance by economic, social, political and technological factors. However, lately, environmental factors are also included into the corporate environment. Recent research studies focus on the Environmental Management System as an extremely effective instrument for organizations; and concentrate on the Environmental Innovation as technological product and process innovation. Product innovation has been widely studied in the areas of new product development, product design for environment, and design for remanufacturing. The studies on remanufacturing show that it can be profitable and can create environmental benefits. However, the literature is insufficient on process innovation. Consequently, environmental innovation as technological product and process innovation results in a reduction of environmental impacts, and there is an emerging need for further studies on process innovation in remanufacturing.

  6. Past, Present and Future of the Innovation Process

    Directory of Open Access Journals (Sweden)

    Ondřej Žižlavsk y

    2013-09-01

    management control of innovation performance under the postdoc research project “Innovation Process Performance Assessment: a Management Control System Approach in the Czech Small and Medium-sized Enterprises” No. 13- 20123P of the Czech Science Foundation.

  7. Innovation in Construction: Learning Processes in implementing new Technologies

    DEFF Research Database (Denmark)

    Clausen, Lennie

    1999-01-01

    The article is concerned with the question: How do construction firms implement new technology on construction projects? A model of the implementation process is presented based on a review of the construction innovation literature, innovation theory, and organisational learning theories....

  8. OPEN INNOVATION PROCESSES IN SOCIAL MEDIA PLATFORMS

    OpenAIRE

    Yang, Yang

    2013-01-01

    Innovation power has becomes to the priority concern for many enterprises. Open innovation, which acts as a new innovation method, is now applied in many companies due to its unique advantages. On the other hand, social media platforms have been widely accepted by public and it shares an immeasurable business resources. Based on those facts, there must be space to link social media and open innovation together to achieve win-win. The objective was to research the important factors for op...

  9. Innovating Healthcare Processes for Speed and Effectiveness

    Directory of Open Access Journals (Sweden)

    Maryline Margueritte

    2013-12-01

    Full Text Available For several years, health networks have developed devices enabling coordinated care of patients in France, regarding both medical plans as well as medico-psycho-social and human care. Some have developed computerized health records for sharing useful information for the coordination and continuity of care. Since the 2009 hospital reform, cooperative operating modes between health system professionals and users are being installed. The implementation of a health information system permits, on one hand, to ensure the transversality of the business process with the patient and, on the other hand, to measure the results of the medical and economic evolution of a complex system of information. The possibilities offered by new technologies of information and communication enable the development of applications supporting increased "on line" participation for citizens. The "ambulatory approach" exports healthcare outside hospital walls. This is an innovative medicine allowing the patient to stay at his home. In France, this re-engineering is based on four areas: a medical record, a collective ownership by the medical and paramedical professions, empowerment of patients and networking in the health sector.Keywords: Health; Networks; Information System; Innovation; Medicine; Patients; Science.

  10. Innovation as a distributed, collaborative process of knowledge generation: open, networked innovation

    NARCIS (Netherlands)

    Sloep, Peter

    2009-01-01

    Sloep, P. B. (2009). Innovation as a distributed, collaborative process of knowledge generation: open, networked innovation. In V. Hornung-Prähauser & M. Luckmann (Eds.), Kreativität und Innovationskompetenz im digitalen Netz - Creativity and Innovation Competencies in the Web, Sammlung von

  11. Green Process Innovation and Innovation Benefit: The Mediating Effect of Firm Image

    Directory of Open Access Journals (Sweden)

    Yuan Ma

    2017-09-01

    Full Text Available By evaluating green process innovation and its innovator’s benefit including short- and long-term dimensions, we first analyzed the relationship between green process innovation and its benefits. Second, we set up a regression model to test the hypotheses using 267 survey data from coal mining firms in China. Finally, we verified the positive relationship between green process innovation and its long-term benefit, and the non-significant relationship between green process innovation and its short-term benefit, and the mediating effect played by firm image in the long run.

  12. RELATIONSHIP MARKETING IN THE INNOVATION PROCESSES

    OpenAIRE

    Rodica Boier

    2013-01-01

    Inspired from the context of business-to-business markets, relationship marketing in the context of innovation have been expanded more and more to the consumer markets as well. The paper starts with a review of several most relevant studies on relationship marketing-innovation topic, from the first references to the current complex approaches. The effective stakeholder involvement in the value creation provides a more fertile ground for further successful innovations. All of the variables gen...

  13. Analytic Hierarchy Process Expansion for Innovation Performance Measurement Framework

    Directory of Open Access Journals (Sweden)

    Song-Kyoo Kim

    2013-01-01

    Full Text Available Innovation is a top strategic priority for the majority of companies. The need for innovation becomes more and more evident in the current corporate world, and the purpose of innovation is to create business value. The Analytic Hierarchy Process (AHP is a structured technique for organizing and analyzing complex decisions. This paper is targeting the framework design of the innovation performance criteria and provides the general guidelines to evaluate the relationship between the criteria by using AHP expansion.

  14. People, Politics, and Innovation: A Process Perspective

    NARCIS (Netherlands)

    L. Alexander (Lameez)

    2014-01-01

    markdownabstract__Abstract__ Innovation is often considered the Holy Grail of competitive advantage and growth in modern organizations. Organizing for innovation can therefore be seen as the cornerstone of organizational success. In this dissertation, I aimed to advance a more complex and

  15. The nature of innovation processes in Facility Management services

    DEFF Research Database (Denmark)

    Nardelli, Giulia

    Purpose: This work investigates the dynamics of interaction between stakeholders of Facilities Management (FM) innovation and improvement processes. The aim is to understand how the complex value chain of FM services influences innovation processes within this field. Theory: This study combines...... theories on innovation in services with research focused on the empirical field of FM. More specifically, the analytical framework for this study applies the differentiation between reactive and proactive innovation processes by Toivonen and Tuominen (2009) to the value chain identified by Coenen...... has a threefold impact on the nature of innovation processes within this field. Firstly, end-users of FM services are usually not involved in innovation processes, although they might sometimes play a role as initial drivers. Secondly, FM services are intangible but more easily reproducible than other...

  16. REGIONALIZATION OF MANAGEMENT PROCESS BY INNOVATIVE ACTIVITY

    Directory of Open Access Journals (Sweden)

    E. V. Sibirskaia

    2014-01-01

    Full Text Available Summary. In current market conditions, the economy and Russia's accession to international trade scholars and experts from various fields of knowledge paying special attention to a huge set of regional problems. The growing role of regional research determines the level of establishing effective mechanisms for the implementation of the economic interests of actors as well as economic development and improving the quality of human life is the priority objectives of federal, regional and local authorities. Today, the Russian economic science faces a global goal - to develop ways and means of transformation of the Russian economy and bring it to a path of sustainable, innovative development, providing new quality of life. Achieving this goal must surely be a central task of the Russian economics and politics, as in the near future and the long term In article authors opened the maintenance of determinants of innovative development of the territory, mediated by strengthening of regionalization of management by innovative activity: condition of resource and innovative potential; the developed forms and nature of interaction between public authorities of regional level, local community and business; applied forms of integration of subjects of managing for realization of their innovative potential due to expansion of opportunities of participation in the perspective directions of scientific and technical, economic and social development; system of the incentives developing favorable conditions for introduction and development of innovative technologies, and also increases in the enterprise activity, formed by the external institutional environment; regional economic policy as instrument of increase of efficiency of innovative activity.

  17. Study on Product Innovative Design Process Driven by Ideal Solution

    Science.gov (United States)

    Zhang, Fuying; Lu, Ximei; Wang, Ping; Liu, Hui

    Product innovative design in companies today relies heavily on individual members’ experience and creative ideation as well as their skills of integrating creativity and innovation tools with design methods agilely. Creative ideation and inventive ideas generation are two crucial stages in product innovative design process. Ideal solution is the desire final ideas for given problem, and the striving reaching target for product design. In this paper, a product innovative design process driven by ideal solution is proposed. This design process encourages designers to overcome their psychological inertia, to foster creativity in a systematic way for acquiring breakthrough creative and innovative solutions in a reducing sphere of solution-seeking, and results in effective product innovative design rapidly. A case study example is also presented to illustrate the effectiveness of the proposed design process.

  18. Impact of Customer Relationship Management on Product Innovation Process

    OpenAIRE

    Li, Yelin; Thi, Thu Sang Nguyen

    2012-01-01

    In marketing, the common view is that customer relationships enhance innovativeness. Regularly it involves doing something new or different in response to market conditions. However, previous studies have not addressed how customer relationship management (CRM) plays its role in product innovation process. This thesis proposes and tests how key CRM activities influence and relate to each stage in product innovation process. The objective of this study is to test how customer relations managem...

  19. Micro-Processes of Collaborative Innovation in Danish Welfare Settings:

    DEFF Research Database (Denmark)

    Lundgaard Andersen, Linda

    2015-01-01

    This chapter explores micro processes of collaborative innovation from a learning perspective. The point of departure for the chapter is my ongoing research with welfare service professionals who display considerable ambivalence towards innovation, feeling both enthusiastic towards it and burdene...... and performance and consequently how contemporary collaborative innovation can lead both to constructive and destructive processes.......This chapter explores micro processes of collaborative innovation from a learning perspective. The point of departure for the chapter is my ongoing research with welfare service professionals who display considerable ambivalence towards innovation, feeling both enthusiastic towards it and burdened...... by it. I start by framing the Danish discourse of public collaborative governance in two empirical fields: sitebased management and democracy in the 1990s, and social entrepreneurship and social innovation in the 2000s. I demonstrate how the prevailing discourses offer a number of scripts for action...

  20. Innovative model of business process reengineering at machine building enterprises

    Science.gov (United States)

    Nekrasov, R. Yu; Tempel, Yu A.; Tempel, O. A.

    2017-10-01

    The paper provides consideration of business process reengineering viewed as amanagerial innovation accepted by present day machine building enterprises, as well as waysto improve its procedure. A developed innovative model of reengineering measures isdescribed and is based on the process approach and other principles of company management.

  1. Measuring and enabling learning behavior in product innovation processes

    NARCIS (Netherlands)

    Gieskes, J.F.B.; van der Heijden, Beatrice

    2004-01-01

    It is generally acknowledged that innovation is one of the most important predictors of firm success or failure. Successful innovation processes require creating new organizational capabilities to handle the external pressure for new products and processes (fast, good and at low costs), and the

  2. Learning and improvement in product innovation processes: Enabling behaviors

    NARCIS (Netherlands)

    Gieskes, J.F.B.; Langenberg, Ilse

    2001-01-01

    Product Innovation is described as a continuous and cross-functional process involving all stages in the product life cycle. This approach gives way to study product innovation processes from a continuous improvement and learning viewpoint. The Continuous Improvement in the global product MAnagement

  3. Assumptions of Customer Knowledge Enablement in the Open Innovation Process

    Directory of Open Access Journals (Sweden)

    Jokubauskienė Raminta

    2017-08-01

    Full Text Available In the scientific literature, open innovation is one of the most effective means to innovate and gain a competitive advantage. In practice, there is a variety of open innovation activities, but, nevertheless, customers stand as the cornerstone in this area, since the customers’ knowledge is one of the most important sources of new knowledge and ideas. Evaluating the context where are the interactions of open innovation and customer knowledge enablement, it is necessary to take into account the importance of customer knowledge management. Increasingly it is highlighted that customers’ knowledge management facilitates the creation of innovations. However, it should be an examination of other factors that influence the open innovation, and, at the same time, customers’ knowledge management. This article presents a theoretical model, which reveals the assumptions of open innovation process and the impact on the firm’s performance.

  4. Bridging Technometric Method and Innovation Process: An Initial Study

    Science.gov (United States)

    Rumanti, A. A.; Reynaldo, R.; Samadhi, T. M. A. A.; Wiratmadja, I. I.; Dwita, A. C.

    2018-03-01

    The process of innovation is one of ways utilized to increase the capability of a technology component that reflects the need of SME. Technometric method can be used to identify to what extent the level of technology advancement in a SME is, and also which technology component that needs to be maximized in order to significantly deliver an innovation. This paper serves as an early study, which lays out a conceptual framework that identifies and elaborates the principles of innovation process from a well-established innovation model by Martin with the technometric method, based on the initial background research conducted at SME Ira Silver in Jogjakarta, Indonesia.

  5. Towards a Toolbox for a Process Innovation Laboratory

    DEFF Research Database (Denmark)

    Gong, Jie; Møller, Charles

    2011-01-01

    Driven by the global competition, process Innovation has been a challenge to large enterprises for many years. The research in this paper discusses about the theory and methods of Business Process Innovation (BPI) in designing Intelligent Supply Chains (ISC) in inter-organizations. We first review...... the BPI concepts, compare it with Business Process Improvement (BPIm) and Business Process Reengineering (BPR), and then build an analytical framework to define business process innovation from four different perspectives: management science, knowledge management, information technology and quality...

  6. Towards a Toolbox for a Process Innovation Laboratory

    DEFF Research Database (Denmark)

    Gong, Jie; Møller, Charles

    2012-01-01

    Driven by the global competition, process Innovation has been a challenge to large enterprises for many years. The research in this paper discusses about the theory and methods of Business Process Innovation (BPI) in designing Intelligent Supply Chains (ISC) in inter-organizations. We first review...... the BPI concepts, compare it with Business Process Improvement (BPIm) and Business Process Reengineering (BPR), and then build an analytical framework to define business process innovation from four different perspectives: management science, knowledge management, information technology and quality...

  7. Innovation indicators: a survey of innovative activities in the international food processed industry

    Directory of Open Access Journals (Sweden)

    Vinicius Cardoso de Barros Fornari

    2015-02-01

    Full Text Available This paper seeks to combine traditional methods of measuring intensity with other alternative indicators to examine the dispersion of innovation activities in different industries and countries. The hypothesis that underlies the study lies in the fact that in the Food Processed Industry (IAP the traditional methods are insufficient to detect the core of the innovation process. As method, we analyzed patent data extracted from the twenty-five largest food processed companies in the world and suggested different indicators developed from the Pesquisa de Inovação Tecnológica (PINTEC, 2010 – for Brazilian companies – and the Community Innovation Survey (CIS, 2009 – for European Union companies. The results allowed us to establish relationships in three dimensions: (i the complexity of the innovative effort of the IAP; (ii the efforts to innovation in different countries are distinct and; (iii there is heterogeneity in country performance.

  8. Understanding the innovation adoption process of construction clients, Clients driving Innovation

    NARCIS (Netherlands)

    Hartmann, Andreas; Dewulf, Geert P.M.R.; Reymen, Isabelle; Adams, L.; Guest, K.

    2006-01-01

    Although the role of clients in stimulating construction innovation seems to be controversial, little has been known about their innovation adoption behaviour. This paper presents first results of an ongoing research project the aim of which is to shed more light on the adoption processes of

  9. Sources of Information as Determinants of Product and Process Innovation

    OpenAIRE

    G?mez, Jaime; Salazar, Idana; Vargas, Pilar

    2016-01-01

    In this paper we use a panel of manufacturing firms in Spain to examine the extent to which they use internal and external sources of information (customers, suppliers, competitors, consultants and universities) to generate product and process innovation. Our results show that, although internal sources are influential, external sources of information are key to achieve innovation performance. These results are in line with the open innovation literature because they show that firms that are ...

  10. Assessment of the impact of innovation processes: methodological approaches

    Directory of Open Access Journals (Sweden)

    Demilkhanova B.A.

    2016-12-01

    Full Text Available in the article the prospects of development of innovative processes at a regional level the system of indicators of assessment effective components of innovation potential of the region. A conclusion about the predominance in the economy of the regions under study investment options for updating technology has been made based on the calculation and analysis of indicators of innovation investment in the fixed capital.

  11. Process innovation in tourism management: A review of the literature

    Directory of Open Access Journals (Sweden)

    Irma Elia Damian

    2015-06-01

    Full Text Available Purpose: Identifying gaps in the academic literature regarding three great management topics: Process Innovation, Tourism Management and Process Innovation in Tourism Management in order to establish the conceptual framework and identify future lines of research. Design/methodology: For this research, a systematic review was conducted on items obtained from accredited databases recognized as EBSCO, OECD, among others, the literature on Process Innovation, Tourism Management and Process Innovation in Tourism Management. Findings: As a result of this review the opportunity for academic research was identified, this due to a theoretical gap which exists on the subject of Process Innovation in Tourism Management. Research limitations/implications: For the realization of this research the databases used were: EBSCO, Emerald, OECD, ProQuest and Scientific Research. The authors are aware that there may be other papers of the subject that were not considered in this article. Practical implications: Following this research the road to research other issues is opened, such as: what impact does it have and how do Process Innovations in Tourism Management are carried along in organizations belonging to Sector Originality/value: The knowledge of how process innovation in tourism management occurs in hospitality organizations gives a better understanding and comprehension of this subjects opening the possibility, for other organizations, of adopting and adapting them in areas related to customer satisfaction, improvement of the image of the organization and quality of the service offered.

  12. Group creativity and innovation: a motivated information processing perspective

    NARCIS (Netherlands)

    de Dreu, C.K.W.; Nijstad, B.A.; Bechtoldt, M.N.; Baas, M.

    2011-01-01

    The authors review the Motivated Information Processing in Groups Model (De Dreu, Nijstad, & Van Knippenberg, 2008) to understand group creativity and innovation. Although distinct phenomena, group creativity and innovation are both considered a function of epistemic motivation (EM; the degree to

  13. Organizational infrastructure of innovation processes in Russian Russia

    Directory of Open Access Journals (Sweden)

    Kuznetsova Elena

    2017-01-01

    Full Text Available The study presents the regional and national statistics, allowing drawing the conclusions about the state of the innovation process, its elements, and their relationships. The main result of the study is the identified “gap” between basic science as the object of creating innovations and manufacturing enterprises as the object of the implementation of innovations. According to the authors, there is a necessity for the process control for not only the creation, but the implementation of innovations in production; the formation of an infrastructure that can provide the interaction of science and industry, the transformation of scientific developments into the manufacturing process now. This structure should be a buffer zone between the elements of the innovation process, create an area of mutually beneficial cooperation. The article considers the evolution of scientific development transformation in production. The organizational model of “innovation-to-production” transfer established on the small innovative enterprises affiliated with the leading educational institutions is suggested. The merits and drawbacks of the organizational interaction models in the “higher education institution-the small innovative enterprise-the enterprise” chain are shown.

  14. Firm value creation and viability between product and process innovation

    Directory of Open Access Journals (Sweden)

    Maria Fedele

    2014-01-01

    Full Text Available The role and characteristics of the innovation process have undergone changes throughout the history of industrial capitalism. In the contest of an emerging systemic complexity, technological innovation is able to generate a positive impact on the economic performances of companies by improving their internal efficiency, which allows to increase the market competitiveness. Innovation is, in fact, the leverage to gain competitive advantages that are the source of value creation and sustainable growth, to preserve and celebrate as one of the key components of the intangible assets of companies. Starting from Schumpeter's process of creative destruction, which considers innovation as “the engine of economic development” and “a continuous process of change and accumulation of knowledge”. The paper analyzes the variables at the center of innovation studies, the innovative approach and the impact of technological positioning as early-mover or follower in the market. Peculiarities will be described related to the definition of the project portfolio mix, the process of designing and developing of a new product, as well as the relationship between innovation and competitive advantage. Further attention will be placed on the targets of innovation and on the factors, objective and context, which hinder the willingness by the entrepreneur to „break‟ the stationary balance by introducing new combinations production factors as an essential condition for the maintenance of competitive advantage and the creation of value. The research approach is based on a qualitative methodology. The data retrieval was carried out through secondary sources.

  15. Process innovations in the management of radioactive wastes

    International Nuclear Information System (INIS)

    Theyyunni, T.K.

    1995-01-01

    Innovative processes and techniques were investigated for their possible application in the management of low, intermediate and high level radioactive wastes. High decontamination, high volume reduction, process simplicity and operational safety are some of the objectives of these investigation. Based on the favourable results, it is hoped that many of these process innovations can be introduced in the waste management schemes with beneficial results. (author)

  16. Factors Affecting Process Innovation Teams’ Learning and Their Impact on the Success of the Process Innovation Projects

    Directory of Open Access Journals (Sweden)

    İbrahim H. Seyrek

    2007-06-01

    Full Text Available Based on 145 process innovation teams, we have studied factors supporting team learning and their impact on the success of the process innovation projects. As a result, we have found that team vision, recording and reviewing project related information, filing, following a structural development process and co-location of team members are factors supporting team learning and project success. Also, two dimensions of learning, information acquisition and information implementation, are positively related to the success of the process innovation projects

  17. The knowledge conversion SECI process as innovation indicator analysis factor

    OpenAIRE

    Silva, Elaine da [UNESP; Valentim, Marta Lígia Pomim [UNESP

    2013-01-01

    It highlights the innovation importance in the current society and presents innovation indicators applied in 125 countries. We made an analysis in the 80 variables distributed through seven GII pillars, trying to identify the direct, indirect or null incidences of the knowledge conversion way described by the SECI Process. The researched revealed the fact that knowledge management, in this case specifically the knowledge conversion SECI Process, is present in the variables that, according to ...

  18. The Role of Demonstration Projects in Construction innovation processes

    DEFF Research Database (Denmark)

    Clausen, Lennie

    1999-01-01

    The article is describing the methodology of a case-study approach to the investigation of demonstration projects and their impact on the development of process and product innovations in the construction industry.......The article is describing the methodology of a case-study approach to the investigation of demonstration projects and their impact on the development of process and product innovations in the construction industry....

  19. Process Techno – Innovation Using TQM in Developing Countries

    Directory of Open Access Journals (Sweden)

    Fasil Taddese

    2010-08-01

    Full Text Available Techno-innovation has been competitive edge for most manufacturing companies. Rapid advancement in technology-innovation geared-up with global mega-competition has resulted in unprecedented economic growth where TQM has played major role. Despite slow economic growth in developing countries caused by incapability to develop their own technology, failure to make wise decision in adopting competent technology, and inability to properly utilize adopted technologies; tremendous developments are seen in some. Examples can be Indian companies that won the prestigious Deming Prize and Japan Quality Medal after adopting necessary technologies from Japan under TQM. We have addressed process techno-innovation by 4M (Man, Machine, Method, Material and 1E (working condition-corporate culture approach. Results indicate that TQM affects process techno-innovation by primary effect on human resource and working condition/corporate culture. Three stage gates vis-à-vis: process understanding, process improvement and technology learning, and process techno-innovation are the mechanisms through which TQM promotes process techno-innovation in developing countries.

  20. Technological Innovation: Concept, Process, Typology and Implications in the Economy

    Directory of Open Access Journals (Sweden)

    Mihaela DIACONU

    2011-10-01

    Full Text Available Growing interest worldwide to boost innovation in business sector activities, especially the technology, is intended to maintain or increase national economic competitiveness, inclusively as an effect of awareness concerning the effects resulting from economic activity on consumption of resources and environment, which requires design of new patterns of production and consumption. In this paper we review the most important contributions in the literature in terms of the implications of technological innovation in the economy, at the microand macroeconomic level, viewing the organization's ability to generate new ideas in support of increasing production, employment and environmental protection, starting from the concepts of innovation, innovation process and, respectively, from the innovation typology analysis.

  1. Dynamics Of Innovation Diffusion With Two Step Decision Process

    Directory of Open Access Journals (Sweden)

    Szymczyk Michał

    2014-02-01

    Full Text Available The paper discusses the dynamics of innovation diffusion among heterogeneous consumers. We assume that customers’ decision making process is divided into two steps: testing the innovation and later potential adopting. Such a model setup is designed to imitate the mobile applications market. An innovation provider, to some extent, can control the innovation diffusion by two parameters: product quality and marketing activity. Using the multi-agent approach we identify factors influencing the saturation level and the speed of innovation adaptation in the artificial population. The results show that the expected level of innovation adoption among customer’s friends and relative product quality and marketing campaign intensity are crucial factors explaining them. It has to be stressed that the product quality is more important for innovation saturation level and marketing campaign has bigger influence on the speed of diffusion. The topology of social network between customers is found important, but within investigated parameter range it has lover impact on innovation diffusion dynamics than the above mentioned factors

  2. Innovation During the Supplier Selection Process

    DEFF Research Database (Denmark)

    Pilkington, Alan; Pedraza, Isabel

    2014-01-01

    Established ideas on supplier selection have not moved much from the original premise of how to choose between bidders. Whilst we have added many different tools and refinements to choose between alternative suppliers, its nature has not evolved. We move the original selection process approach...... observed through an ethnographic embedded researcher study has refined the selection process and has two selection stages one for first supply covering tool/process developed and another later for resupply of mature parts. We report the details of the process, those involved, the criteria employed...... and identify benefits and weaknesses of this enhanced selection process....

  3. Innovation Process Planning Model in the Bpmn Standard

    Directory of Open Access Journals (Sweden)

    Jurczyk-Bunkowska Magdalena

    2013-12-01

    Full Text Available The aim of the article is to show the relations in the innovation process planning model. The relations argued here guarantee the stable and reliable way to achieve the result in the form of an increased competitiveness by a professionally directed development of the company. The manager needs to specify the effect while initiating the realisation of the process, has to be achieved this by the system of indirect goals. The original model proposed here shows the standard of dependence between the plans of the fragments of the innovation process which make up for achieving its final goal. The relation in the present article was shown by using the standard Business Process Model and Notation. This enabled the specification of interrelations between the decision levels at which subsequent fragments of the innovation process are planned. This gives the possibility of a better coordination of the process, reducing the time needed for the achievement of its effect. The model has been compiled on the basis of the practises followed in Polish companies. It is not, however, the reflection of these practises, but rather an idealised standard of proceedings which aims at improving the effectiveness of the management of innovations on the operational level. The model shown could be the basis of the creation of systems supporting the decision making, supporting the knowledge management or those supporting the communication in the innovation processes.

  4. Innovation management and performance evaluation: structured process of literature review

    Directory of Open Access Journals (Sweden)

    Julieta Scheidt Dienstmann

    2014-03-01

    Full Text Available This article aims to provide a process for the construction of knowledge demanded by researchers at the initial stage of their work on innovation management. To meet this need, the process adopted was the ProKnow-C (Knowledge Development Process - Constructivist, which proposes the construction of researchers knowledge considering their perceptions on the subject, and the recognition of scientific articles analyzed. The knowledge generated in the researcher means, for this article, knowing what are the main journals, articles, authors and keywords associated with 15 articles with scientific recognition and aligned with the perception of the researcher on innovation management, with focus on results. Through this application, the process ProKnow-C is presented demonstrating how it can be used by researchers to meet their initial demands of building knowledge about innovation management and aims to instill future works  based on structured processes for selecting a theoretical framework in this field of knowledge.

  5. IDEA MANAGEMENT IN THE INNOVATION PROCESS

    Directory of Open Access Journals (Sweden)

    Cătălin George ALEXE

    2014-12-01

    Full Text Available The employees of a company often want to make themselves useful and to make life easier at work by providing potentially useful ideas, aimed at eliminating problems or to exploit the opportunities. Without the ability to obtain new ideas, an organization stagnates, declines and eventually is eliminated by the competitors who have new ideas. To materialize the idea into an innovative product, it is desirable that it corresponds to the company's goals to be achieved with the existing technology and resources in order to reduce the investments. Thus, it appeared the need for an idea management to bring order in the set of ideas and to create a transparent and effective mode in attracting and management of these ideas. This paper proposes, starting from a number of scientific approaches in the literature, to address to the idea management as a complex model and to identify which are those dedicated IT solutions that could help going over various phases and sub-phases of such a complex model, particularly useful for the management of a company.

  6. The process of organisational adaptation through innovations, and organisational adaptability

    OpenAIRE

    Tikka, Tommi

    2010-01-01

    This study is about the process of organisational adaptation and organisational adaptability. The study generates a theoretical framework about organisational adaptation behaviour and conditions that have influence on success of organisational adaptation. The research questions of the study are: How does an organisation adapt through innovations, and which conditions enhance or impede organisational adaptation through innovations? The data were gathered from five case organisations withi...

  7. An Innovative Synthesis Methodology for Process Intensification

    DEFF Research Database (Denmark)

    Lutze, Philip

    to improve a process. However, to date only a limited number have achieved implementation in industry, such as reactive distillation, dividing wall columns and reverse flow reactors. A reason for this is that the identification of the best PI option is neither simple nor systematic. That is to decide where......‐based solution approach. Starting from an analysis of existing processes, the methodology generates a set of PI process options. Subsequently, the initial search space is reduced through an ordered sequence of steps. As the search space decreases, more process details are added, increasing the complexity...

  8. Information technology, knowledge processes, and innovation success

    NARCIS (Netherlands)

    Song, X.M.; Zang, F.; Bij, van der J.D.; Weggeman, M.C.D.P.

    2001-01-01

    Despite the obvious linkage between information technologies (IT) and knowledge processes and the apparent strategic importance of both, little research has done to explicitly examine how, if at all, IT and knowledge processes affect firm outcomes. The purpose of this study is to bridge this

  9. Enabling knowledge processes in innovative environments

    NARCIS (Netherlands)

    Pavesi, S.

    2003-01-01

    The concept of organisational knowledge as a valuable strategic asset has become quite popular recently. Increased competition, globalisation and the emergence of new organisational models built on process-based organisational structures require organisations to create, capture, share and apply

  10. Industry characteristics management of innovative processes at the enterprises of light industry

    OpenAIRE

    Yusupov, Ulugbek

    2015-01-01

    This article considers the issues of innovative development and management of innovative processes in the knitting industry of Uzbekistan. Analyzed the main directions of innovative processes and provides recommendations for their management.

  11. The Process of Accepting Technology Innovation for Rural Teachers

    Science.gov (United States)

    Cerovski, Jeremy

    2016-01-01

    In order for educational leaders to facilitate effectively the integration of technology, an understanding of the process rural teachers experience with technology integration is critical. The goal of the qualitative study was to discover and understand rural teachers' process for accepting technology innovation in order to improve the…

  12. PARTICIPATORY INNOVATION AS UNFOLDING PROCESSES OF RELA TING

    DEFF Research Database (Denmark)

    Larsen, Henry; Said Mosleh, Wafa

    2018-01-01

    has to accept uncertainty to what the outcomes of these processes may be. We argue that the social dynamics emerging between stakeholders in participatory innovation processes are just as important to study as pre-defined achievements or business outcomes. Hence, we seek to make a conceptual...

  13. Theory Building- Towards an understanding of business model innovation processes

    DEFF Research Database (Denmark)

    Taran, Yariv; Boer, Harry; Lindgren, Peter

    2009-01-01

    Companies today, in some industries more than others, invest more capital and resources just to stay competitive, develop more diverse solutions, and increasingly start to think more radically, when considering to innovate their business model. However, the development and innovation of business...... models is a complex venture and has not been widely researched yet. The objective of this paper is therefore 1) to build a [descriptive] theoretical understanding, based on Christensen's (2005) three-step procedure, to business models and their innovation and, as a result of that, 2) to strengthen...... researchers' and practitioners' perspectives as to how the process of business model innovation can be realized. By using various researchers' perspectives and assumptions, we identify relevant inconsistencies, which consequently lead us to propose possible supplementary solutions. We conclude our paper...

  14. Needs-Based Innovation in Interventional Radiology: The Biodesign Process.

    Science.gov (United States)

    Steinberger, Jonathan D; Denend, Lyn; Azagury, Dan E; Brinton, Todd J; Makower, Josh; Yock, Paul G

    2017-06-01

    There are many possible mechanisms for innovation and bringing new technology into the marketplace. The Stanford Biodesign innovation process is based in a deep understanding of clinical unmet needs as the basis for focused ideation and development. By identifying and vetting a compelling unmet need, the aspiring innovator can "derisk" a project and maximize chances for successful development in an increasingly challenging regulatory and economic environment. As a specialty founded by tinkerers, with a history of disruptive innovation that has yielded countless new ways of delivering care with minimal invasiveness, lower morbidity, and lower cost, interventional radiologists are uniquely well positioned to identify unmet needs and develop novel solutions free of dogmatic convention. Copyright © 2017 Elsevier Inc. All rights reserved.

  15. Technological innovation: a structrational process view

    NARCIS (Netherlands)

    Fehse, K.I.A.; Wognum, P.M.

    1999-01-01

    The central aim of our research is to describe and explain how the introduction of a computer-based technology, which supports co-operative work in engineering departments, induces change processes. The employment of computer-based technologies in product development organisations to support

  16. Innovative Pedagogical Processes Involving Educational Technology

    DEFF Research Database (Denmark)

    Weitze, Charlotte Lærke

    to create motivating learning for the students. This was done by examining the three actors in the educational institution (students, teachers and the surrounding organisation) individually and relationally. The design-based research project developed knowledge in co-design processes with the three actors...

  17. Biodesign process and culture to enable pediatric medical technology innovation.

    Science.gov (United States)

    Wall, James; Wynne, Elizabeth; Krummel, Thomas

    2015-06-01

    Innovation is the process through which new scientific discoveries are developed and promoted from bench to bedside. In an effort to encourage young entrepreneurs in this area, Stanford Biodesign developed a medical device innovation training program focused on need-based innovation. The program focuses on teaching systematic evaluation of healthcare needs, invention, and concept development. This process can be applied to any field of medicine, including Pediatric Surgery. Similar training programs have gained traction throughout the United States and beyond. Equally important to process in the success of these programs is an institutional culture that supports transformative thinking. Key components of this culture include risk tolerance, patience, encouragement of creativity, management of conflict, and networking effects. Copyright © 2015 Elsevier Inc. All rights reserved.

  18. Intermediate organizations in the innovation process in Mexico

    Directory of Open Access Journals (Sweden)

    Maria del Pilar Monserrat Pérez Hernández

    2016-07-01

    Full Text Available The innovation activity depends strongly on the interaction between generating actors and end-users of new knowledge and technologies. There are several intermediate organizations (IO that facilitate translating the needs of the users with the new technologies that are beingdeveloped, in order to satisfy more effectively their demands. This paper analyzes the mediation process involved in the IO in innovative activity in Mexico, to identify structural holes in the innovation process. The relevant results in the Mexican intermediation process points that threeimportant structural holes of the process are missing: one between the negotiation process and sponsorship, the second in marketing and commercial profit of the obtained results and the last one in the regulation and referring activities. It is very important that the detected missinglinks in the intermediation process are filled, because they can hinder considerably the overall profit and benefits that society could obtained of the innovation process.

  19. Innovation in the product development process and performance of firm

    DEFF Research Database (Denmark)

    Oliveira, Selma R.M.; Alves, Jorge L.; Boer, Harry

    2017-01-01

    This article aims to show the influence of the incorporation of technological innovations based on 3D modeling and additive manufacturing on the performance of firm and value co-creation for client , in the perspective of product development process (PDP), systematized in two phases: elaboration...... that it is possible to combine additive manufacturing techniques and traditional processes of production of components in pewter and the incorporation of other components in composite materials and other metallic alloys, allowing to develop innovative products in very short time frames, with market acceptance...

  20. Innovation through developing consumers communities. Part II: Digitalizing the innovation processes

    Science.gov (United States)

    Avasilcai, S.; Galateanu (Avram, E.

    2015-11-01

    The current research recognises the concept of innovation as the main driver for organisational growth and profitability. The companies seek to develop new ways to engage consumers and customers into co - creation value through the product design, development and distribution processes. However the main concern is manifested for new and creative ways of customization products based on consumers’ requirements and needs. Thus the need for innovative virtual instruments arose as the demand from social communities for personalised products or services increased. Basically companies should develop own innovative platforms, where consumers can participate, with ideas, concepts or other relevant contributions, and interact with designers or engineers for product development. This paper aims to present the most important features of platform development within BMW Group as a concept and as innovative instrument. From this point of view it is important to enhance past experiences of the company in the field of co - creation projects. There will be highlighted the dual consumers’ character as co - creator and co - evaluator based on their involvement in the proposed and developed projects and platform structure. The significant impact on platform functioning it has the diversity of company's concerns for Research & Development and innovation activities. From this point of view there will be assessed the platform structure, the main proposed themes and the evaluation process. The main outcome is to highlight the significance of platform development as innovative tool for consumers’ communities’ enhancement. Based on the analysis of “BMW Co-Creation Lab”, there will be revealed the main consumers concerns in terms of safety, comfort and appearance of the products. Thus it is important to understand the evaluation process of gathered ideas and intellectual property policy. The importance of platform development and implementation will be highlighted by company

  1. The integrated model of innovative processes management in foreign countries

    Directory of Open Access Journals (Sweden)

    M. T. Kurametova

    2017-01-01

    Full Text Available The formation of an innovative economy must correspond to the promising areas of development of scientific, technical and social progress. To ensure sustainable innovative development of the national economy, it is not only necessary to develop our own tools and mechanisms that are characteristic of the domestic management model, but also the rational use of foreign experience in this field. Analysis of international experience in the use of various tools and mechanisms, management structures for the creation of high-tech and knowledge-based enterprises showed: the integrated nature of innovative development and modernization of the economy is the most sound methodological approach of a phased, systemic transition to new technological structures; When developing tools and mechanisms for innovative development of the economy, one should take into account the actual state of the material and technical base and the existing industrial structure of production, take into account the real possibilities of using different types of resources. The greatest innovation activity is shown by those countries in which the national integrated system effectively provides favorable conditions for the development and introduction of innovations in various spheres of life. International experience in the use of forms of governance can be considered as a mobile system of relations with the real sector of the economy. In the article is given the experience of foreign countries, and examples of adaptation for Kazakhstan integrated models of management of innovative processes to create high-tech enterprises, innovative products which can be competitive in the world market. The author highlighted the role of JSC “Kazakhtelecom” with the widespread provision of public services, having the status of a National operator associated with the provision of the services including long-distance and an international telecommunication for telecommunication networks in General

  2. Innovation Processes and Factors on Peripheral Regions of Portugal and Spain

    OpenAIRE

    Natário, Maria Manuela

    2009-01-01

    The innovation is the main locomotive of the economic growth and competitiveness. The understanding about innovation process has updated in last decades. The innovation concept not only includes the innovation, but also increases innovation, that can be operated in products but also in the production process, that can be in the conception of the product but also at the level of the market and even at the organizational level. The interactive models of innovation process are put upon linear mo...

  3. A perspective on PSE in pharmaceutical process development and innovation

    DEFF Research Database (Denmark)

    Gernaey, Krist; Cervera Padrell, Albert Emili; Woodley, John

    2012-01-01

    The pharmaceutical industry is under growing pressure to increase efficiency, both in production and in process development. This paper discusses the central role of Process Systems Engineering (PSE) methods and tools in pharmaceutical process development and innovation, and searches for answers...... to questions such as: Which PSE methods can be applied readily? Where is more method development needed? The paper covers key subjects for development of economically and environmentally sustainable pharmaceutical processes, including Process Analytical Technology in its broadest sense, continuous...... pharmaceutical manufacturing and green processes, and is illustrated with a series of short examples taken from the literature and ongoing research projects....

  4. Innovative processing for improved electrical steel properties

    Directory of Open Access Journals (Sweden)

    Schneider, J.

    2010-10-01

    Full Text Available Electrical steel grades are the normal construction material for electrical motors and transformers because of their enhanced soft magnetic properties. One of the current trends in their production aims for increasing the silicon and/or aluminum concentration (above 3 wt % to reduce magnetic losses through increased electrical resistivity. This is very difficult to realize by conventional processing, mainly because of cracking during cold rolling. An alternative production route is proposed that raises the silicon and/or aluminum concentration by surface deposition of silicon and/or aluminum on a low-Si/low-Al steel substrate, e.g. by a short immersion in a molten Al-Si bath, followed by its diffusion into the bulk during subsequent annealing. This diffusion substantially modifies the microstructural features and therefore affects the mechanical and magnetic properties. Results of research efforts to optimize this production route and to understand the mechanisms and effects of the structural changes are presented and discussed.Los aceros eléctricos se usan, normalmente, en la construcción de motores eléctricos y transformadores debido a sus suaves propiedades magnéticas. Una de las tendencias actuales es producir aceros con contenidos mayores de silicio y/o aluminio (por encima de un 3 %, en peso para reducir las pérdidas magnéticas a través del incremento de la resistividad eléctrica. Una de las desventajas de producir este tipo de aceros con altos contenidos de silicio y/o aluminio es el agrietamiento producido en el material durante el proceso de laminado en frío. Para incrementar el contenido de silicio y/o aluminio en aceros con bajos contenidos de estos elementos de aleación, se sugiere un procedimiento alternativo de producción que se basa, fundamentalmente, en depositar un recubrimiento rico en silicio y/o aluminio, en la superficie del acero. Por ejemplo, uno de los métodos utilizados es sumergir el material en una aleaci

  5. Project INOVEMAR: Innovation in Sea Produce Processment

    Directory of Open Access Journals (Sweden)

    Maria Alberta Araújo

    2014-06-01

    Following information conveyed by Docapesca, the less valued species captured in the region are different mackerel species, Atlantic horse mackerel, pout, octopus and mullet. Mackerel and Atlantic horse mackerel, due to their high subcutaneous fat were used for smoking and for the production of canned smoked fillets and patés, with different sauces.The smoking process included: washing fresh fish, 30 minutes immersion in a 80º brine, followed by dripping and drying for 48h. Smoking was carried out at 70ºC during 3h, with a final stage at 90ºC. Several paté formulations were developed with mackerel and atlantic horse mackerel, with different types and quantities of ingredients and flavourings to obtain different products. Special attention was paid to the amounts of thickeners and emulsifiers to attain a pleasant spread ability. All preparations were sterilized for 15 minutes at 121ºC. A sensory panel with 10 judges and a consumer panel with 59 consumers were used to test the developed products. The 59 consumers (17-25 years of age classified smoked products as moderately pleasant. 82% of the consumers tested expressed willingness to purchase the product. In what concerns patés, sensory judges as well as consumers rated the majority of products as very good in the several parameters under evaluation, indication that there is a great potential for these type of commodities. Several fish species are being studied for pre-cooking conservation. In all the cases studied, typical Portuguese cuisine is being used, followed by rapid chilling and packing with modified atmospheres. Preparations, preservation and subsequent consumption are being carried out at the school's canteen. The results obtained until now show that low commercial valued species can be used with success, providing some culinary expertise is added. This is a very important aspect since, transferring this technology to industry, may lead to the development of new products and help an easy flow of

  6. Toward Sustainable Anticipatory Governance: Analyzing and Assessing Nanotechnology Innovation Processes

    Science.gov (United States)

    Foley, Rider Williams

    Cities around the globe struggle with socio-economic disparities, resource inefficiency, environmental contamination, and quality-of-life challenges. Technological innovation, as one prominent approach to problem solving, promises to address these challenges; yet, introducing new technologies, such as nanotechnology, into society and cities has often resulted in negative consequences. Recent research has conceptually linked anticipatory governance and sustainability science: to understand the role of technology in complex problems our societies face; to anticipate negative consequences of technological innovation; and to promote long-term oriented and responsible governance of technologies. This dissertation advances this link conceptually and empirically, focusing on nanotechnology and urban sustainability challenges. The guiding question for this dissertation research is: How can nanotechnology be innovated and governed in responsible ways and with sustainable outcomes? The dissertation: analyzes the nanotechnology innovation process from an actor- and activities-oriented perspective (Chapter 2); assesses this innovation process from a comprehensive perspective on sustainable governance (Chapter 3); constructs a small set of future scenarios to consider future implications of different nanotechnology governance models (Chapter 4); and appraises the amenability of sustainability problems to nanotechnological interventions (Chapter 5). The four studies are based on data collected through literature review, document analysis, participant observation, interviews, workshops, and walking audits, as part of process analysis, scenario construction, and technology assessment. Research was conducted in collaboration with representatives from industry, government agencies, and civic organizations. The empirical parts of the four studies focus on Metropolitan Phoenix. Findings suggest that: predefined mandates and economic goals dominate the nanotechnology innovation process

  7. The Relationship between Creative Personality Composition, Innovative Team Climate, and Team Innovativeness: An Input-Process-Output Perspective

    Science.gov (United States)

    Mathisen, Gro Ellen; Martinsen, Oyvind; Einarsen, Stale

    2008-01-01

    This study investigates the relationship between creative personality composition, innovative team climate, and team innovation based on an input-process-output model. We measured personality with the Creative Person Profile, team climate with the Team Climate Inventory, and team innovation through team-member and supervisor reports of team…

  8. Rethinking communication in innovation processes: creating space for change in complex systems

    NARCIS (Netherlands)

    Leeuwis, C.; Aarts, N.

    2011-01-01

    This paper systematically rethinks the role of communication in innovation processes, starting from largely separate theoretical developments in communication science and innovation studies. Literature review forms the basis of the arguments presented. The paper concludes that innovation is a

  9. Rethinking Communication in Innovation Processes: Creating Space for Change in Complex Systems

    NARCIS (Netherlands)

    Leeuwis, C.; Aarts, N.

    2011-01-01

    This paper systematically rethinks the role of communication in innovation processes, starting from largely separate theoretical developments in communication science and innovation studies. Literature review forms the basis of the arguments presented. The paper concludes that innovation is a

  10. Innovation

    Science.gov (United States)

    EPA frames innovation as critical to the protection of human health and the environment through initiatives such as sustainable practices, innovative research, prize competitions, innovation awards, partnerships, and community activities.

  11. Products and Processes Innovation from the Perspective of Environmental Management

    Directory of Open Access Journals (Sweden)

    Vanessa Theis

    2017-05-01

    Full Text Available Considering the present scenario of globalization of the economy, the dynamics of the market determines the speed of change in business models, environmental aspects can contribute to the design of technological innovations. Given this perception, the general objective of this research was to investigate how industrial organizations in the metal-mechanic sector, located in the Vale do Rio dos Sinos region, reconcile the product innovation activities and processes, with the structuring principles of environmental management. This economic segment is characterized as one that has the highest rates of innovation and greater investment in research and development. Data were collected through a survey research with managers of 159 companies of the analysis unit. Evidence collected provided the realization that innovations tend to be adjustments made to the legal provisions that require the mitigation of environmental impacts in the production process, especially in reducing pollution and using less toxic assets, which does not generate sufficient stimulus to the development of new products.

  12. The Center for Environmental Technology Innovative Technology Screening Process

    International Nuclear Information System (INIS)

    Bertrand, C.M.

    1995-02-01

    The Center for Environmental Technology's (CET) mission is to provide a fully integrated system for accelerated evaluation, development, commercialization, and public acceptance of creative environmental solutions which match the foremost demands in today's environmentally sensitive world. In short, CET will create a means to provide quick, effective solutions for environmental needs. To meet this mission objective, CET has created a unique and innovative approach to eliminating the usual barriers in developing and testing environmental technologies. The approach paves the way for these emerging, cutting-edge technologies by coordinating environmental restoration and waste management activities of industry, universities, and the government to: efficiently and effectively transfer technology to these users, provide market-driven, cost-effective technology programs to the public and DOE, and aid in developing innovative ideas by initiating efforts between DOE facilities and private industry. The central part to this mission is selecting and evaluating specific innovative technologies for demonstration and application at United States Department of Energy (DOE) installations. The methodology and criteria used for this selection, which is called the CET Innovative Technology Screening Process, is the subject of this paper. The selection criteria used for the screening process were modeled after other DOE technology transfer programs and were further developed by CET's Technology Screening and Evaluation Board (TSEB). The process benefits both CET and the proposing vendors by providing objective selection procedures based on predefined criteria. The selection process ensures a rapid response to proposing vendors, all technologies will have the opportunity to enter the selection process, and all technologies are evaluated on the same scale and with identical criteria

  13. Occupational clusters as determinants of organizational learning in the product innovation process

    NARCIS (Netherlands)

    Hyland, Paul W.; Gieskes, J.F.B.; Sloan, Terrence R.

    2001-01-01

    The importance of innovation to the survival of organisations in a turbulent environment has led to greater emphasis on improving the innovation process. Where learning is captured and applied to existing and current innovation processes, the opportunity exists for improvement in innovation

  14. Project and Innovation Management in New Product Development Processes

    DEFF Research Database (Denmark)

    Henriksen, Leif; Gayretli, Ahmet

    2010-01-01

    Although the process of innovation is one of the most important drivers behind the growth and prosperity of today’s global economy, it is one of the least understood. This paper aims to address specific problems in carrying out new product development processes. There are crucial issues related...... to product design processes like inefficient project management, increasing product complexity, conflict management, shortfall of existing methods and tools, and high failures in new product introduction. A new approach has been proposed for a system based platform, which consist of a product platform...

  15. Accelerating customer integration into innovation processes using Pico-Jobs

    OpenAIRE

    Blohm, Ivo;Fähling, Jens;Leimeister, Jan Marco;Krcmar, Helmut;Fischer, Jan

    2014-01-01

    Crowdsourcing marketplaces emerged in the internet and enable the integration of customers in various tasks along the innovation process. Marketplaces such as Amazon?s Mechanical Turk install a member base for third parties, where they can offer small, highly structured paid tasks which can hardly be solved automatically with ICT which we call Pico Jobs. In this paper a new method for systematically utilizing the creative potential of the users of these marketplaces for new product developmen...

  16. The formalization of innovative processes of food technology equipment

    Directory of Open Access Journals (Sweden)

    V. A. Panfilov

    2016-01-01

    Full Text Available Improving the efficiency of scientific and engineering work to develop methods for converting agricultural raw materials into food is the most important condition of output processing and food sectors of agriculture in the sixth technological structure. The purpose of this article is to formalize the process of creating a progressive technique of food technologies. The process of self-organizing technological systems, presents a model of dual mechanism of control with regard to the processes of food technology. It is shown that in the process of adaptation development of the technological system as purposefully improving the structure and functioning of the system: increases the efficiency of interaction with the external environment. This smoothed out the contradictions of the technological system and its the main thing, the main technical contradiction: «productivity – quality». The steps to be taken to ensure that the technological system of conditions for intensive development. It is concluded that the potential development of some technological systems is hidden in the perspective of automation, and others – is associated with adaptive development processes, in particular machines, devices and bioreactors. The paper shows that innovative and truly breakthrough developments leading to the creation of fundamentally new equipment and new generations of technological systems, possible only with the establishment of patterns of organization, structure, functioning and development of open systems, which are modern technologies of agriculture. The mechanism of control of technological object acts as a core of adaptive development, which implements the anti-entropic entity management object, formalizing the innovation process of innovative food processing technologies.

  17. Feasibility of microbially improved oil recovery (MIOR) in Northern German oil reservoirs; Bakterien zur Erhoehung des Entoelungsgrades in norddeutschen Erdoellagerstaetten

    Energy Technology Data Exchange (ETDEWEB)

    Amro, M. [Inst. fuer Erdoel- und Erdgasforschung, Clausthal-Zellerfeld (Germany); Kessel, D. [Inst. fuer Erdoel- und Erdgasforschung, Clausthal-Zellerfeld (Germany)

    1996-05-01

    The scope of this study was to investigate the feasibility of microbially improved oil recovery (MIOR) in Northern German oil reservoirs. Suitable bacterial strains had to be identified. The mechanisms for oil mobilization and incremental recovery had to be investigated. To this end, two independent methods were employed, namely static autoclave tests and dynamic flood experiments. The static tests were carried out without reservoir rock matrix to preselect suitable bacterial strains with a minimum of experimental effort. The selected strains were then tested in dynamic flood experiments under reservoir conditions on Bentheimer sandstone cores to quantify the oil recovery. Key results of the study are: (1) Two bacterial strains were found having excellent metabolic activity with potential for oil recovery under Northern German reservoir conditions. (2) These bacteria can be injected into and transported in the pores of the sandstone. (3) The metabolic activity of these bacteria leads to substantial incremental oil recovery in repeated injection - shut in - production cycles. (4) Incremental oil recovery is attributed to wettability change and biomass production by the metabolites of the bacteria. (orig.) [Deutsch] Das Ziel dieser Arbeit ist die Untersuchung der Anwendbarkeit der mikrobiell verbesserten Erdoelgewinnung in norddeutschen Lagerstaetten. Zunaechst waren hierfuer einsetzbare Bakterienstaemme zu identifizieren. Diese waren dann auf ihr Entoelungsvermoegen zu ueberpruefen. Schliesslich sollten die Entoelungsmechanismen ermittelt werden. Die Vorauswahl potentiell geeigneter Bakterienstaemme erfolgte durch verschiedene mikrobiologische Forschungsinstitute. Zur Minimierung des experimentellen Aufwands wurden diese Staemme dann im Institut fuer Erdoel- und Erdgasforschung in statischen Autoklavenversuchen unter Lagerstaettenbedingungen, jedoch noch ohne Lagerstaettengestein, auf ihre Stoffwechselaktivitaet sowie Art und Eigenschaften ihrer Stoffwechselprodukte

  18. TELEGRAPHS TO INCANDESCENT LAMPS: A SEQUENTIAL PROCESS OF INNOVATION

    Directory of Open Access Journals (Sweden)

    Laurence J. Malone

    2000-01-01

    Full Text Available This paper outlines a sequential process of technological innovation in the emergence of the electrical industry in the United States from 1830 to 1880. Successive inventions that realize the commercial possibilities of electricity provided the foundation for an industry where technical knowledge, invention and diffusion were ultimately consolidated within the managerial structure of new firms. The genesis of the industry is traced, sequentially, through the development of the telegraph, arc light and incandescent lamp. Exploring the origins of the telegraph and incandescent lamp reveals a process where a series of inventions and firms result from successful efforts touse scientific principles to create new commodities and markets.

  19. City Labs as Vehicles for Innovation in Urban Planning Processes

    Directory of Open Access Journals (Sweden)

    Christian Scholl

    2016-12-01

    Full Text Available This paper assesses the role of urban experiments for local planning processes through a case-based analysis of the city lab of Maastricht. In conjunction with this, the article offers three contributions, as additional elements. Firstly, the paper develops a set of defining characteristics of city labs as an analytical concept which is relevant for discussions about (collaborative planning. Secondly, it refines the literature on collaborative planning by drawing attention to experimentation and innovation. Thirdly, the paper assesses the potential of city labs to contribute to the innovation of urban governance. The work draws from the literature on experimentation and learning as well as the literature on collaborative urban planning. In the conclusions, we discuss the potential of city labs as vehicles for learning about new urban planning approaches and their limitations as spaces for small-scale experimentation. The paper is based on research for the URB@Exp research project funded by JPI Urban Europe.

  20. Product creativity assessment of innovations: considering the creative process

    DEFF Research Database (Denmark)

    Valgeirsdóttir, Dagný; Onarheim, Balder; Gabrielsen, Gorm

    2015-01-01

    in creativity research, while the role of consumer’s knowledge of the creative process behind the product is fairly unexplored. In this paper, we present an empirical study investigating whether providing information about a complex development process could amplify consumer’s perception of product creativity......Creativity is a critical component that feeds into all stages of innovation and design processes by promoting inspiration, ideation, and implementation of ideas, revealing the need for thorough research to support design creativity. Assessment of product creativity is a reoccurring topic....... Does storytelling about the process contribute to amplifying creativity ratings? What form of storytelling is needed to make an impact? Results from 134 respondents showed a small but not significant amplifying effect from the additional process information; however, an important learning can be drawn...

  1. Democratizing Process Innovation? On Citizen Involvement in Public Sector BPM

    Science.gov (United States)

    Niehaves, Björn; Malsch, Robert

    ‘Open Innovation’ has been heavily discussed for product innovations; however, an information systems (IS) perspective on ‘process innovation’ has not yet been taken. Analyzing the example of the public sector in Germany, the paper seeks to investigate the factors that hinder and support ‘open process innovation’, a concept we define as the involvement of citizens in business process management (BPM) activities. With the help of a quantitative study (n=358), six factors are examined for their impact on citizen involvement in local government BPM initiatives. The results show that citizen involvement in reform processes is not primarily motivated by the aim of cost reduction, but rather related to legitimacy reasons and the intent to increase employee motivation. Based on these findings, implications for (design) theory and practice are discussed: Instead of detailed collaborative business processes modeling, the key of citizen involvement in public sector BPM lies in communication and mutual understanding.

  2. The Interaction between Personality, Social Network Position and Involvement in Innovation Process

    NARCIS (Netherlands)

    E. Dolgova (Evgenia); W. van Olffen (Woody); F.A.J. van den Bosch (Frans); H.W. Volberda (Henk)

    2010-01-01

    textabstractAbstract This dissertation proposal investigates how personality and individuals’ social network position affect individuals’ involvement into the innovation process. It posits that people would feel inclined to become involved into the different phases of the innovation process

  3. DEVELOPMENT OF INNOVATIVE PROCESSES IN THE COMPANIES OF SPACE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Katrina B. Dobrova

    2016-01-01

    Full Text Available In this article, the proposals to improve the theoretical and methodological base for the development of innovative technologies aerospace industry are made based on an analysis of its current state and the study of the factors influencing this process at every stage, as well as the goals and objectives of the modernization of the Russian economy. The relevance of the study due to the fact that the rocket and space industry is regarded as an important component of sustainable socio-economic development and a guarantee of national security. Having our own space rocket means significantly promotes sound public policy in accordance with the doctrines, strategies, concepts and programs in the political, economic, social, military, environmental, scientific, technological, information and other fields. It was noted that the study of features of the commercialization of innovative technologies of the Russian Federation, the space industry is crucial to determine the factors and conditions for successful implementation of the development industry, the search of promising directions of development of the space industry and the economy as a whole. Emphasis is placed on the formation of the basic elements of innovation infrastructure and the creation of effective mechanisms of commercialization, creation of actual operating business on their basis, investment in the development of the aerospace industry, including using the tools of public-private partnerships and venture financing.

  4. The impacts of market liberalization on innovation processes in the electricity sector

    International Nuclear Information System (INIS)

    Markard, J.; Truffer, B.; Imboden, D.M.

    2004-01-01

    Market liberalization has triggered fundamental changes in the electricity sector with far-reaching economic, technical, organizational and ecological consequences. The paper examines how electricity market liberalization has influenced innovation processes at the level of electric utilities and in the electricity sector as a whole. The results are based on an empirical survey including two case studies, green power and fuel cells, in which utility innovation strategies were analysed. From the similarities in both cases and the aggregated effects of innovation strategies, we identify several indications for a general change of innovation processes in the sector: the innovation activity has increased, there is a greater variety of innovation projects, product innovations and organizational innovations have gained importance, innovation networks have become smaller and more specific, and the professionalism of innovation management is improving. (author)

  5. Embedding accountability throughout innovation process in the green economy: the need for an innovative approach

    NARCIS (Netherlands)

    Setiawan, A.D.; Singh, R.; Romijn, H.A.; Taufik, T.; Prabasari, I.; Rineksane, I.A.; Yaya, R.; Widowati, R.; Putra, R.; Riyadi, S.; Harsanto, P.

    Innovation in the green economy entails transformative change in society. Vital infrastructure technologies in the fields of energy, water, communication, waste handling, and so on have many interdependencies with other economic sectors. Hence, introducing green innovation in such sectors has

  6. Realizing innovative public waterworks: Aligning administrative capacities in collaborative innovation processes

    NARCIS (Netherlands)

    S. Grotenbreg (Sanne); M.W. van Buuren (Arwin)

    2016-01-01

    textabstractThe importance of government support for innovation is widely acknowledged, but the way governments support innovation is changing. We discern three trends: local innovation policies are gaining importance; governments increasingly choose a bottom-up, tailor-made approach to support

  7. Organizational Dimensions of Innovative Practice: A Qualitative Investigation of the Processes Supporting Innovation Adoption in Outpatient Physical Therapy Practice.

    Science.gov (United States)

    Sabus, Carla; Spake, Ellen

    2018-01-01

    The ability to innovate and adapt practice is a requirement of the progressive healthcare provider. Innovative practice by rehabilitation providers has largely been approached as personal professional development; this study extends that perspective by examining innovation uptake from the organizational level. The varied professions can be expected to have distinct qualities of innovation adoption that reflect professional norms, values, and expectations. The purpose of this qualitative study was to describe the organizational processes of innovation uptake in outpatient physical therapy practice. Through nomination, two outpatient, privately owned physical therapy clinics were identified as innovation practices. Eighteen physical therapists, three owners, and a manager participated in the study. The two clinics served as case studies within a grounded theory approach. Data were collected through observation, unstructured questioning, work flow analysis, focus group sessions, and artifact analysis. Data were analyzed and coded among the investigators. A theoretical model of the innovation adoption process in outpatient physical therapy practice was developed. Elements of the model included (1) change grounded in relationship-centered care, (2) clinic readiness to accept change, and (3) clinic adaptability and resilience. A social paradigm of innovation adoption informed through this research complements the concentration on personal professional development.

  8. Process Innovation with Blockchain in Banking - A case study of how Blockchain can change the KYC process in banks.

    OpenAIRE

    Thavanathan, Jenitha

    2017-01-01

    Innovation is the key to prosperity in competitive markets, as almost every significant business venture can trace its roots to an original spark of innovation, and on occasion, ground breaking innovation would foster a new way of thinking. Enter Blockchain, an emerging factor contributing to the industry's forced transition into a digital-first age. This thesis aims to uncover how process innovation with Blockchain technology can reinvent KYC processes in the banking industry today. This is ...

  9. Analysis of an innovative process for landfill gas quality improvement

    International Nuclear Information System (INIS)

    Lombardi, L.; Carnevale, E.A.

    2016-01-01

    Low methane content landfill gas is not suitable for feeding engines and is generally flared. This type of landfill gas may be enriched by removing the inert carbon dioxide. An innovative process, based on the carbon dioxide captured by means of accelerated carbonation of bottom ash was proposed and studied for the above purpose. The process was investigated at a laboratory scale, simulating different landfill gas compositions. The enrichment process is able to decrease the carbon dioxide concentration from 70 to 80% in volume to 60% in volume, requiring about 36 kg of bottom ash per Nm"3 of landfill gas. Using this result it was estimated that an industrial scale plant, processing 100–1000 Nm"3/h of low methane content landfill gas requires about 28,760–2,87,600 t of bottom ash for a one year operation. The specific cost of the studied enrichment process was evaluated as well and ranges from 0.052 to 0.241 Euro per Nm"3 of entering landfill gas. The energy balance showed that about 4–6% of the energy entered with the landfill gas is required for carrying out the enrichment, while the use of the enriched landfill gas in the engine producing electricity allows for negative carbon dioxide emission. - Highlights: • The process uses a waste stream as material to capture CO_2. • The process uses a simple gas/solid fixed bed contact reactor at ambient conditions. • The process captures the CO_2 to enrich low-CH4 landfill gas. • The specific cost ranges from 0.052 to 0.241 Euro per Nm"3 of entering landfill gas. • The process consumes about 4–6% of the entering energy and acts as CO_2 sink.

  10. Innovators.

    Science.gov (United States)

    NEA Today, 2001

    2001-01-01

    Describes various innovations that have been developed to enhance education. These innovations include: helping educators help at-risk students succeed; promoting high school journalism; ensuring quality online learning experiences; developing a student performing group that uses theater to address social issues; and having students design their…

  11. Innovative SANEX process for trivalent actinides separation from PUREX raffinate

    International Nuclear Information System (INIS)

    Sypula, Michal

    2013-01-01

    Recycling of nuclear spent fuel and reduction of its radiotoxicity by separation of long-lived radionuclides would definitely help to close the nuclear fuel cycle ensuring sustainability of the nuclear energy. Partitioning of the main radiotoxicity contributors followed by their conversion into short-lived radioisotopes is known as partitioning and transmutation strategy. To ensure efficient transmutation of the separated elements (minor actinides) the content of lanthanides in the irradiation targets has to be minimised. This objective can be attained by solvent extraction using highly selective ligands that are able to separate these two groups of elements from each other. The objective of this study was to develop a novel process allowing co-separation of minor actinides and lanthanides from a high active acidic feed solution with subsequent actinide recovery using just one cycle, so-called innovative SANEX process. The conditions of each step of the process were optimised to ensure high actinide separation efficiency. Additionally, screening tests of several novel lipophilic and hydrophilic ligands provided by University of Twente were performed. These tests were aiming in better understanding the influence of the extractant structural modifications onto An(III)/Ln(III) selectivity and complexation properties. Optimal conditions for minor actinides separation were found and a flow-sheet of a new innovative SANEX process was proposed. Tests using a single centrifugal contactor confirmed high Eu(III)/Am(III) separation factor of 15 while the lowest SF Ln/Am obtained was 6,5 (for neodymium). In addition, a new masking agent for zirconium was found as a substitution for oxalic acid. This new masking agent (CDTA) was also able to mask palladium without any negative influence on An(III)/Ln(III). Additional tests showed no influence of CDTA on plutonium present in the feed solution unlike oxalic acid which causes Pu precipitation. Therefore, CDTA was proposed as a Zr

  12. Innovative SANEX process for trivalent actinides separation from PUREX raffinate

    Energy Technology Data Exchange (ETDEWEB)

    Sypula, Michal

    2013-07-01

    Recycling of nuclear spent fuel and reduction of its radiotoxicity by separation of long-lived radionuclides would definitely help to close the nuclear fuel cycle ensuring sustainability of the nuclear energy. Partitioning of the main radiotoxicity contributors followed by their conversion into short-lived radioisotopes is known as partitioning and transmutation strategy. To ensure efficient transmutation of the separated elements (minor actinides) the content of lanthanides in the irradiation targets has to be minimised. This objective can be attained by solvent extraction using highly selective ligands that are able to separate these two groups of elements from each other. The objective of this study was to develop a novel process allowing co-separation of minor actinides and lanthanides from a high active acidic feed solution with subsequent actinide recovery using just one cycle, so-called innovative SANEX process. The conditions of each step of the process were optimised to ensure high actinide separation efficiency. Additionally, screening tests of several novel lipophilic and hydrophilic ligands provided by University of Twente were performed. These tests were aiming in better understanding the influence of the extractant structural modifications onto An(III)/Ln(III) selectivity and complexation properties. Optimal conditions for minor actinides separation were found and a flow-sheet of a new innovative SANEX process was proposed. Tests using a single centrifugal contactor confirmed high Eu(III)/Am(III) separation factor of 15 while the lowest SF{sub Ln/Am} obtained was 6,5 (for neodymium). In addition, a new masking agent for zirconium was found as a substitution for oxalic acid. This new masking agent (CDTA) was also able to mask palladium without any negative influence on An(III)/Ln(III). Additional tests showed no influence of CDTA on plutonium present in the feed solution unlike oxalic acid which causes Pu precipitation. Therefore, CDTA was proposed as

  13. Process innovations to minimize waste volumes at Savannah River

    International Nuclear Information System (INIS)

    Doherty, J.P.

    1986-01-01

    In 1983 approximately 1.6 x 10 3 m 3 (427,000 gallons) of radioactive salt solution were decontaminated in a full-scale demonstration. The cesium decontamination factor (DF) was in excess of 4 x 10 4 vs. a goal of 1 x 10 4 . Data from this test were combined with pilot data and used to design the permanent facilities currently under construction. Startup of the Salt Decontamination Process is scheduled for 1987 and will decontaminate 2 x 10 4 m 3 (5.2 million gallons) of radioactive salt solution and generate 2 x 10 3 m 3 (520,000 gallons) of concentrated and washed precipitate per year. The Defense Waste Processing Facility (DWPF) will begin processing this concentrate in the Precipitate Hydrolysis Process starting in 1989. Laboratory data using simulated salt solution and nonradioactive cesium are being used to design this process. A 1/5-scale pilot plant is under construction and will be used to gain large-scale operating experience using nonradioactive simulants. This pilot plant is scheduled to startup in early 1987. The incentives to reduce the volume of waste that must be treated are self-evident. At Savannah River process development innovations to minimize the DWPF feed volumes have directly improved the economics of the process. The integrity of the final borosilicate glass water form has not been compromised by these developments. Many of the unit operations are familiar to chemical engineers and were put to use in a unique environment. As a result, tax dollars have been saved, and the objective of safely disposing of the nation's high-level defense waste has moved forward

  14. DETERMINANTS OF QUALITY MANAGEMENT PRACTICES IN STIMULATING PRODUCT AND PROCESS INNOVATIONS

    Directory of Open Access Journals (Sweden)

    Boris Urban

    2017-12-01

    Full Text Available Research highlights Quality Management System (QMS has now become a recognizable guarantee of trust in certified business systems. A critical review of the literature reveals that empirical studies conducted to date have yielded conflicting findings on the relationship between quality management practices and innovation. This study empirically investigates how quality management principles may act as determinants of product and process innovations. The results show that customer focus and leadership explain a significant amount of product innovation, but not process innovation. Empirical support also finds that people management explains a significant amount of variance in both product innovation and process innovation. The findings highlight the importance of developing formal organisational mechanisms to measure levels of such quality determinants as they are easily overlooked or taken for granted. Moreover, firms need to recognise that innovation is a multi-faceted concept that can be controlled from a process or a product perspective, a distinction which is sometimes blurred.

  15. TASKS OF INNOVATION PROCESSES PROGRAM-TARGET MANAGEMENT AT REGIONAL LEVEL

    Directory of Open Access Journals (Sweden)

    Mikhail Shchepakin

    2015-09-01

    Full Text Available The article analyzes the regional system of innovation management, discussed the existing problems of program-oriented management of innovative processes at the regional level, as well as possible solutions to improve the efficiency of the regional innovation system.

  16. Innovation

    African Journals Online (AJOL)

    In recent years ULA has emphasized advocacy, and contributed to progress towards new legislation (freedom of information, copyright, the ... East African Community e-government strategy) of importance to the library and ... Innovation Vol.

  17. Risk management for companies focused on innovation processes

    Directory of Open Access Journals (Sweden)

    Ana Paula Beck da Silva Etges

    Full Text Available Abstract Risk is inherent to the activities of technology and innovation companies and to manage them represent an opportunity to improve the company capability to achieve its goals. The use of ERM models has been studied since the Committee of Sponsoring Organizations of the Treadway Commission guides. This article adapted the MIGGRI model for the context of an innovation company from a TSP in Brazil. Using a case study and a review from previous ERM literature, the article show that is possible to measure the risks that an innovation company faces, and that they may be managed with a view to supporting a company’s strategy. Were applied an economic analysis based on a MCS and an indicator of CFaR were applied to measure innovation risks. A strategic performance model for innovation companies are proposed and the benefit to implement Risk Management practices in innovation organizations was validated.

  18. Managerial capacity in the innovation process and firm profitability

    OpenAIRE

    Giovanni Cerulli; Bianca Potì

    2013-01-01

    This paper studies at firm level the relation between managerial capacity in doing innovation and profitability. Moving along the intersection between the evolutionary/neo-Schumpeterian theory and the Resource-Based-View of the firm, we prove econometrically that managerial efficiency in mastering the production of innovation is an important determinant of firm innovative performance and market success, and that it complements traditional Schumpeterian drivers. By using a Stochastic Frontier ...

  19. Modelling of innovative SANEX process mal-operations

    International Nuclear Information System (INIS)

    McLachlan, F.; Taylor, R.; Whittaker, D.; Woodhead, D.; Geist, A.

    2016-01-01

    The innovative (i-) SANEX process for the separation of minor actinides from PUREX highly active raffinate is expected to employ a solvent phase comprising 0.2 M TODGA with 5 v/v% 1-octanol in an inert diluent. An initial extract / scrub section would be used to extract trivalent actinides and lanthanides from the feed whilst leaving other fission products in the aqueous phase, before the loaded solvent is contacted with a low acidity aqueous phase containing a sulphonated bis-triazinyl pyridine ligand (BTP) to effect a selective strip of the actinides, so yielding separate actinide (An) and lanthanide (Ln) product streams. This process has been demonstrated in lab scale trials at Juelich (FZJ). The SACSESS (Safety of Actinide Separation processes) project is focused on the evaluation and improvement of the safety of such future systems. A key element of this is the development of an understanding of the response of a process to upsets (mal-operations). It is only practical to study a small subset of possible mal-operations experimentally and consideration of the majority of mal-operations entails the use of a validated dynamic model of the process. Distribution algorithms for HNO_3, Am, Cm and the lanthanides have been developed and incorporated into a dynamic flowsheet model that has, so far, been configured to correspond to the extract-scrub section of the i-SANEX flowsheet trial undertaken at FZJ in 2013. Comparison is made between the steady state model results and experimental results. Results from modelling of low acidity and high temperature mal-operations are presented. (authors)

  20. Innovation process in industrialized countries of Western Europe. Vol. 3. Innovations in the power industry. Der Innovationsprozess in westeuropaeischen Industrielaendern. Bd. 3. Innovation in der Energiewirtschaft

    Energy Technology Data Exchange (ETDEWEB)

    Ray, G F [National Institute of Economic and Social Research, London (UK)

    1979-01-01

    A group of European economic research institutes as well as a group of sociologists working in the Social Sciences Department of the University of Hamburg examined the industrial innovation process in companies situated in the Federal Republic of Germany, Great Britain, and Sweden. The following institutes were members of the group of economic research institutes: The Ifo-Institute for Economic Research at Munich, which also assumed coordinating responsibilities, the National Institute of Economic and Social Research, London, as well as the Industriens Utredningsinstitut, Stockholm. The purpose of this multinational project was to examine the process of research work in development and application of technologies using cases of innovation found in the energy industry. The study was intended to lead innovation research out of its methodical and scientific isolation to bridge certain gaps found in the existing innovation research work and thus to provide politicians and innovators in the major industrialized countries of the Western World with useful tools for decision making. Volume 3 contains the general development of the world energy situation and of problems of energy policy to be found in the three countries. Furthermore, it contains detailed studies of the innovation process of the latest major individual technologies to be found in this field.

  1. Electronic Ticketing System As a Process of Innovation

    Directory of Open Access Journals (Sweden)

    Rafael Mendes Lübeck

    2012-02-01

    Full Text Available Considering the increased complexity in the competitive landscape, innovation is the keyword of the post-industrial era, and in order to be attained by the enterprises, it requires new strategies, capabilities and competencies. Considering this scenario this study included analysis of improvements achieved with the implementation of the e-ticketing system in a case of public transport in major cities of southern Brazil categorized as cases β and γ. Furthermore, it aimed to ascertain whether the improvements in information management provided by electronic ticketing qualify it as an innovation. The research was based on the theoretical model of innovation described in Tables 1, 2, 3, 4 in order to guide the research activities described. Qualitative data was collected through interviews and document analysis. The collected information was analyzed using content analysis and the amount of vehicles and passengers in the cities covered by the survey were used as secondary data. The characteristic effects of innovation were found to be in line with the results of e-ticketing in the cases analyzed, making this system a way to attain innovation. In accordance with the guidelines set for this study, it is worth emphasizing that the impacts of the e-ticketing system were considered innovative, not the system itself, because electronic billing was a means to achieve innovation and not an innovation per se.

  2. Towards an understanding of business model innovation processes

    DEFF Research Database (Denmark)

    Taran, Yariv; Boer, Harry; Lindgren, Peter

    2009-01-01

    Companies today, in some industries more than others, invest more capital and resources just to stay competitive, develop more diverse solutions, and increasingly start to think more radically, when considering to innovate their business model. However, the development and innovation of business...

  3. Development Directions of Innovative Processes in Publishing and Printing Industry

    Directory of Open Access Journals (Sweden)

    Kotlyarevsky, Ya.V.

    2015-03-01

    Full Text Available Provision of innovative development of publishing and printing industry in the context of global trends is investigated. Generalized characteristic of organizational and economic relations arising due to development of publishing and printing spheres on the basis of innovation is presented; an attempt to evaluate their impact and the prospects for the national economy is made.

  4. INVESTIGATION OF MARKETING TECHNOLOGIES IN THE INNOVATION PROCESS OF ROCKET AND SPACE INDUSTRY

    Directory of Open Access Journals (Sweden)

    K. B. Dobrova

    2016-01-01

    Full Text Available In this article we have studied the use of marketing technologies in the innovation process of enterprises of rocket and space industry. The present study specifies the relevance of chosen research topic, as well as the essence of marketing innovations at the enterprises of rocket and space industry, the structuring of marketing and management processes in the innovation process. There are provided the most common analytical instruments in the marketing and there is marked the importance of use of a global strategy for the enterprises of rocket and space industry. The article also specifies a clear example of application of marketing technologies in the innovation process of the Federal State Unitary Enterprise "State Space Research and Production Center named after Khrunichev M.V'.'. At the beginning the role and place of innovation management and innovation process in the strategic management of the FSUE "SSRPC named after Khrunichev M.V." are shown. Then there are described the basic marketing methods of program-oriented management of the innovation process in the FSUE "SSRPC named after Khrunichev M.V"" and there is highlighted the innovation marketing strategy of the FSUE "SSRPC named after Khrunichev M.V.". There are presented the distinctive features of the competitive strategy of the company of the rocket and space industry and the features of formation (development of the innovative enterprise development strategy based on marketing innovation in the FSUE "SSRPC named after Khrunichev M.V.". The conclusion includes the main findings of the study conducted.

  5. The effectiveness of innovative processes implemented by the SME companies. Results of the empirical research

    Directory of Open Access Journals (Sweden)

    Tomasz Norek

    2013-01-01

    Full Text Available The essence and the importance of innovation in the process of building the competitiveness of enterprises is widely described in the economic literature. But the analysis of innovative activity of companies very often indicates that the innovations introduced to the market do not bring the expected benefits. This leads to the conclusion that very often innovation activities of enterprises are inefficient. And detailed analysis of such cases can identify the key barriers to implementing effective innovation.The modern model for the innovative activity indicates that one of the key factors for success of innovative activity of enterprises is properly implemented the introduction of new solutions to market. The problem of diffusion of innovation involves a number of issues related to the process of spreading and promoting innovation in the market. It is widely recognized that the powers of innovation diffusion is an important determinant of the capacity of firms.Author posed the following research hypothese: Innovative activities carried out by the surveyed companies is inefficient.The purpose of this paper is to present the problems associated with effective diffusion of innovation in the SME sector business activity in Poland, with particular emphasis on the barriers in this area. Commonly available statistical data, the author’s empirical research results from the period 2009–2012 and results of other studies conducted by the University of Szczecin were used to prepare this publication.

  6. Innovative Elution Processes for Recovering Uranium from Seawater

    International Nuclear Information System (INIS)

    Wai, Chien; Tian, Guoxin; Janke, Christopher

    2014-01-01

    Utilizing amidoxime-based polymer sorbents for extraction of uranium from seawater has attracted considerable interest in recent years. Uranium collected in the sorbent is recovered typically by elution with an acid. One drawback of acid elution is deterioration of the sorbent which is a significant factor that limits the economic competitiveness of the amidoxime-based sorbent systems for sequestering uranium from seawater. Developing innovative elution processes to improve efficiency and to minimize loss of sorbent capacity become essential in order to make this technology economically feasible for large-scale industrial applications. This project has evaluated several elution processes including acid elution, carbonate elution, and supercritical fluid elution for recovering uranium from amidoxime-based polymer sorbents. The elution efficiency, durability and sorbent regeneration for repeated uranium adsorption- desorption cycles in simulated seawater have been studied. Spectroscopic techniques are used to evaluate chemical nature of the sorbent before and after elution. A sodium carbonate-hydrogen peroxide elution process for effective removal of uranium from amidoxime-based sorbent is developed. The cause of this sodium carbonate and hydrogen peroxide synergistic leaching of uranium from amidoxime-based sorbent is attributed to the formation of an extremely stable uranyl peroxo-carbonato complex. The efficiency of uranium elution by the carbonate-hydrogen peroxide method is comparable to that of the hydrochloric acid elution but damage to the sorbent material is much less for the former. The carbonate- hydrogen peroxide elution also does not need any elaborate step to regenerate the sorbent as those required for hydrochloric acid leaching. Several CO2-soluble ligands have been tested for extraction of uranium from the sorbent in supercritical fluid carbon dioxide. A mixture of hexafluoroacetylacetone and tri-n-butylphosphate shows the best result but uranium

  7. Innovative Elution Processes for Recovering Uranium from Seawater

    Energy Technology Data Exchange (ETDEWEB)

    Wai, Chien [Univ. of Idaho, Moscow, ID (United States); Tian, Guoxin [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Janke, Christopher [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2014-05-29

    Utilizing amidoxime-based polymer sorbents for extraction of uranium from seawater has attracted considerable interest in recent years. Uranium collected in the sorbent is recovered typically by elution with an acid. One drawback of acid elution is deterioration of the sorbent which is a significant factor that limits the economic competitiveness of the amidoxime-based sorbent systems for sequestering uranium from seawater. Developing innovative elution processes to improve efficiency and to minimize loss of sorbent capacity become essential in order to make this technology economically feasible for large-scale industrial applications. This project has evaluated several elution processes including acid elution, carbonate elution, and supercritical fluid elution for recovering uranium from amidoxime-based polymer sorbents. The elution efficiency, durability and sorbent regeneration for repeated uranium adsorption- desorption cycles in simulated seawater have been studied. Spectroscopic techniques are used to evaluate chemical nature of the sorbent before and after elution. A sodium carbonate-hydrogen peroxide elution process for effective removal of uranium from amidoxime-based sorbent is developed. The cause of this sodium carbonate and hydrogen peroxide synergistic leaching of uranium from amidoxime-based sorbent is attributed to the formation of an extremely stable uranyl peroxo-carbonato complex. The efficiency of uranium elution by the carbonate-hydrogen peroxide method is comparable to that of the hydrochloric acid elution but damage to the sorbent material is much less for the former. The carbonate- hydrogen peroxide elution also does not need any elaborate step to regenerate the sorbent as those required for hydrochloric acid leaching. Several CO2-soluble ligands have been tested for extraction of uranium from the sorbent in supercritical fluid carbon dioxide. A mixture of hexafluoroacetylacetone and tri-n-butylphosphate shows the best result but uranium

  8. Peculiarities of state regulation of the Russian industrial corporations in the process of innovation development

    Directory of Open Access Journals (Sweden)

    K. Dobrova

    2015-01-01

    Full Text Available In this article the features of innovative development corporations in Russia and abroad. The article describes the main factors hampering the process of innovative development of Russian corporations. Defines the role of government programs as an important form of direct government financial support for innovation activities by corporations. Innovative development in the world is caused by the necessity of the continuous increase and retain the competitiveness of enterprises. This innovation enables businesses to compete effectively in the market, attract new customers, improve financial results. The degree of competitiveness of the enterprise is most significant depends on the technological level of the enterprise. In addition, you must take into account the depth of innovation processes in the enterprise, since the competitiveness of lead is not all innovations, but only those that are focused on new markets and accompanied by original.

  9. Management of the Technological Innovation Process in Software Companies from Sinaloa, Mexico

    Directory of Open Access Journals (Sweden)

    Alejandra MIRANDA FELIX

    2016-06-01

    Full Text Available The objective of this paper is to explain the management process of technological innovation within certified software companies from Sinaloa, considering their strategic technology plan, innovative processes, and intellectual capital. This work is based on the study of 9 software companies located in Sinaloa and certified through the CMMI (Capability Maturity Model for Integration process. Their problems are grouped into three areas: 1 strategic technology plan, 2 innovation and 3 intellectual capital. We propose a model of innovation management to explain and evaluate the integration of those three areas applying a mixed methodology, theoretical foundations, and the analysis of the results. The overall results reveal that the certified software companies from Sinaloa manage innovation informally, through an internal, costly and independent innovation process without considering alliances with other companies, educational institutions, government agencies, technology parks or research and development centers.

  10. Innovation

    African Journals Online (AJOL)

    The purpose of Innovation journal of appropriate librarianship and information work in Southern Africa is to publish material on libraries, information supply and other related matters in South and Southern Africa. Vol 45 (2012). DOWNLOAD FULL TEXT Open Access DOWNLOAD FULL TEXT Subscription or Fee Access ...

  11. Innovation

    DEFF Research Database (Denmark)

    Torfing, Jacob; Ricard, Lykke Margot

    2017-01-01

    Innovation i krydsfeltet mellem forskellige styringsparadigmer i offentlige organisationer. New Public Governance gør det muligt at skabe offentlig værdi på nye måder. Men NPG er ingen trylledrik, der fra den ene dag til den anden skaber balance mellem borgernes store forventninger og en trængt ø...

  12. Innovation in the process of education and training of the professionals nuclear

    International Nuclear Information System (INIS)

    Lambistos Agustin, A.; Ruiz Martinez, F. J.

    2014-01-01

    It is a common idea to consider innovation as a strategic function of organizations is shown as a key element of competitiveness. In 1990, Porter said the company gets competitive advantage through innovation, and more recent authors argue that the primary objective should be to create innovation and increase the real wealth, which is the net cash flow long-term undertakings develop, apply and integrate innovations in products and services (Roger More) Therefore, innovation is certainly one of the processes more complex and difficult to manage strategic decision since it is the competitive strategic factor more critical. (Author)

  13. Market-based process and product innovation in the food sector: A Danish research programme

    DEFF Research Database (Denmark)

    Grunert, Klaus G.; Baadsgaard, Allan

    1992-01-01

    This note informs about the Danish MAPP research programme, a collection of 15 research projects aimed at making product and process innovation in the food sector more market-based. The programme, which has an interdisciplinary base, but is geared towards marketing applications, is concerned...... with the organization of the innovation process, the interaction of consumer and producer criteria in product development, the assessment of long-term developments in the market environment and the role distribution system in product innovation. Innovation in both primary production and processing are considered....

  14. Knowledge Management Innovation of the USCG Counternarcotics Deployment Process

    National Research Council Canada - National Science Library

    Espino, James

    2000-01-01

    ...) Pacific Area Tactical Law Enforcement Team (PACAREA TACLET). The focus was on applying knowledge management innovation using the above mentioned methodology to the Law Enforcement Detachment (LEDET) Counternarcotic (CN...

  15. [Socio-psychological factors in managing innovation processes].

    Science.gov (United States)

    Kanep, V V; Popov, G S; Paegle, M S

    1989-01-01

    The main principles of sociopsychologic aspects of the strategy of innovation introduction into health care have been analyzed. Highlighted is the problem of correlation of economic and sociopsychologic management aspects at the modern stage.

  16. Cloud Computing and the Innovation Process of Technology Consulting

    OpenAIRE

    Isse, Jordi

    2010-01-01

    Cloud Computing is heralded as the next big thing in enterprise IT. It will likely have a growing impact on IT and business activities in many organizations. It is changing the way IT departments used to work in order to get competitive advantages and meet the needs of the global economy. Accenture consulting currently has an advantage because they are developing innovation inside and also bringing innovation from outside to its current offer. However, what is of particular interest in this r...

  17. Innovation

    OpenAIRE

    2012-01-01

    Présenté par FutuRIS, plate-forme prospective sur la recherche, l’innovation et la société animée par l’Association Nationale de la Recherche et de la Technologie, ce volume livre un panorama du système français de recherche et d’innovation dans son environnement européen. Sont abordés dans une première partie les champs décisionnels concernés, les politiques nationales menées en matière de R&D, les relations entre enseignement supérieur et recherche et l’Espace européen de la recherche à l’h...

  18. INNOVATION

    DEFF Research Database (Denmark)

    Helms, Niels Henrik

    2012-01-01

    Kravet om innovation og kreativitet er på flere måder en stor og en ny udfordring for voksenuddannelserne. Det udfordrer det didaktiske dilemma, det at vi skal gøres til kompetente og frie mennesker gennem pædagogiske handlinger, som netop pålægger os en ufrihed. – Men hvor denne ufrihed tidligere...... kunne begrundes med, at skolen eller uddannelsen vidste bedre, så er det ikke længere tilfældet. Skolen skal sørge for, at vi lærer noget – og ikke noget andet. Men det kan ikke længere med bestemthed afgøres, hvad det er vi skal lære i skolen, fordi det nye, det kreative og ikke mindst innovative...

  19. Process antecedents of challenging, under-cover and readily-adopted innovations.

    Science.gov (United States)

    Adams, Richard; Tranfield, David; Denyer, David

    2013-01-01

    The purpose of the study is to test the utility of a taxonomy of innovation based on perceived characteristics in the context of healthcare by exploring the extent to which discrete innovation types could be distinguished from each other in terms of process antecedents. A qualitative approach was adopted to explore the process antecedents of nine exemplar cases of "challenging", "under-cover" and "readily-adopted" healthcare innovations. Data were collected by semi-structured interview and from secondary sources, and content analysed according to a theoretically informed framework of innovation process. Cluster analysis was applied to determine whether innovation types could be distinguished on the basis of process characteristics. The findings provide moderate support for the proposition that innovations differentiated on the basis of the way they are perceived by potential users exhibit different process characteristics. Innovations exhibiting characteristics previously believed negatively to impact adoption may be successfully adopted but by a different configuration of processes than by innovations exhibiting a different set of characteristics. The findings must be treated with caution because the sample consists of self-selected cases of successful innovation and is limited by sample size. Nevertheless, the study sheds new light on important process differences in healthcare innovation. The paper offers a heuristic device to aid clinicians and managers to better understand the relatively novel task of promoting and managing innovation in healthcare. The paper advances the argument that there is under-exploited opportunity for cross-disciplinary organisational learning for innovation management in the NHS. If efficiency and quality improvement targets are to be met through a strategy of encouraging innovation, it may be advantageous for clinicians and managers to reflect on what this study found mostly to be absent from the processes of the innovations studied

  20. Proposal of a Modelling of the Innovation Process in an International Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Pauline Lacom

    2017-07-01

    Full Text Available Nowadays, to cope with the competition, and to ensure the durability of their activities, companies have to be able to innovate. Manufacturing companies operating in a B2B market often perceive innovation as a technological result. However, innovation is often more characterized as a process. The needs of the users, and not only the technology, can achieve innovation. In this context, our paper intends to determine how to involve better the users in the innovation process of an international manufacturing company, which is, according to us, representative of the current manufacturing companies. The aim of our research paper is to help manufacturing companies to manage innovation led by users, and to implement their innovation process so that they will be able to set up specific tools for each action of the process. The study proposes a diagram-based language Structured Analysis and Design Technique (SADT that is based on the normative guide FD X50-271 of the French national organization for standardization (AFNOR. The SADT model we propose usefully complements this guide, to make the innovation process more understandable, practical and operational, for manufacturing companies, which are often helpless when faced with the subject. A critical analysis of the model we propose completed in a manufacturing company through semi-structured interviews of the innovation team and questionnaire for all the employees shows the application of the model in the company.

  1. From Process to Practice: Towards a Practice-Based Model of Digital Innovation

    DEFF Research Database (Denmark)

    Ciriello, Raffaele; Richter, Alexander; Schwabe, Gerhard

    2017-01-01

    companies and an extensive set of empirical data, this paper conceptualizes four interrelated digital innovation practices, namely making sense of an idea, aligning mental models, negotiating solution paths, and crafting an idea. We suggest a practice-based model of digital innovation, specify a set......The ongoing digitalization of many corporate functions, including the innovation process, brings about fundamental changes that urge us to rethink established theories. Facilitating digital innovation requires a deep understanding of the actual practices that are carried out by innovating people...... with the help of artifacts. In this paper, we study the use of artifacts and illustrate their different roles in the underlying innovation practices to provide rich insights into digital innovation from a practice perspective. Grounded in a nearly three year-long, qualitative case study at two Swiss software...

  2. Processing of data from innovative parabolic strip telescope.

    Science.gov (United States)

    Kosejk, Vladislav; Novy, J.; Chadzitaskos, Goce

    2015-12-01

    This paper presents an innovative telescope design based on the usage of a parabolic strip fulfilling the function of an objective. Isaac Newton was the first to solve the problem of chromatic aberration, which is caused by a difference in the refractive index of lenses. This problem was solved by a new kind of telescope with a mirror used as an objective. There are many different kinds of telescopes. The most basic one is the lens telescope. This type of a telescope uses a set of lenses. Another type is the mirror telescope, which employs the concave mirror, spherical parabolic mirror or hyperbolically shaped mirror as its objective. The lens speed depends directly on the surface of a mirror. Both types can be combined to form a telescope composed of at least two mirrors and a set of lenses. The light is reflected from the primary mirror to the secondary one and then to the lens system. This type is smaller-sized, with a respectively reduced lens speed. The telescope design presented in this paper uses a parabolic strip fulfilling the function of an objective. Observed objects are projected as lines in a picture plane. Each of the lines of a size equal to the size of the strip corresponds to the sum of intensities of the light coming perpendicular to the objective from an observed object. A series of pictures taken with a different rotation and processed by a special reconstruction algorithm is needed to get 2D pictures. The telescope can also be used for fast detection of objects. In this mode, the rotation and multiple pictures are not needed, just one picture in the focus of a mirror is required to be taken.

  3. Managing Distributed Innovation Processes in Virtual Organizations by Applying the Collaborative Network Relationship Analysis

    Science.gov (United States)

    Eschenbächer, Jens; Seifert, Marcus; Thoben, Klaus-Dieter

    Distributed innovation processes are considered as a new option to handle both the complexity and the speed in which new products and services need to be prepared. Indeed most research on innovation processes was focused on multinational companies with an intra-organisational perspective. The phenomena of innovation processes in networks - with an inter-organisational perspective - have been almost neglected. Collaborative networks present a perfect playground for such distributed innovation processes whereas the authors highlight in specific Virtual Organisation because of their dynamic behaviour. Research activities supporting distributed innovation processes in VO are rather new so that little knowledge about the management of such research is available. With the presentation of the collaborative network relationship analysis this gap will be addressed. It will be shown that a qualitative planning of collaboration intensities can support real business cases by proving knowledge and planning data.

  4. Innovation in Retail Process: From Consumers’ Experience to Immersive Store Design

    Directory of Open Access Journals (Sweden)

    Eleonora Pantano

    2012-09-01

    Full Text Available Due to the current advances in Information and Communication Technologies and consumers’ increasing interest in entertaining and interactive retail environments, the sector of retailing is forced to pursuit innovation to maintain existing consumers and attract new ones. Especially the use of virtual reality techniques offers tools for supporting the design of innovative systems capable of enhancing this process. The aim of this paper is to integrate the consumers’ experience in the development of innovation process for retailing. In particular, our findings highlight how the immersive technologies can be an efficient tool for pushing innovation in retailing. Therefore, the paper provides important issues for scholars and practitioners.

  5. Reassembling the Information Technology Innovation Process: An Actor Network Theory Method for Managing the Initiation, Production, and Diffusion of Innovations

    Science.gov (United States)

    Zendejas, Gerardo; Chiasson, Mike

    This paper will propose and explore a method to enhance focal actors' abilities to enroll and control the many social and technical components interacting during the initiation, production, and diffusion of innovations. The reassembling and stabilizing of such components is the challenging goal of the focal actors involved in these processes. To address this possibility, a healthcare project involving the initiation, production, and diffusion of an IT-based innovation will be influenced by the researcher, using concepts from actor network theory (ANT), within an action research methodology (ARM). The experiences using this method, and the nature of enrolment and translation during its use, will highlight if and how ANT can provide a problem-solving method to help assemble the social and technical actants involved in the diffusion of an innovation. Finally, the paper will discuss the challenges and benefits of implementing such methods to attain widespread diffusion.

  6. Molecular Probes: An Innovative Technology for Monitoring Membrane Processes

    Science.gov (United States)

    Santoro, Sergio

    The ultimate objective of this study is to use molecular probes as an innovative and alternative technology contributing to the advance of membrane science by monitoring membrane processes in-situ, on-line and at sub-micron scale. An optical sensor for oxygen sensing was developed by the immobilization of tris (1,10-phenanthroline) ruthenium (II) (Ru(phen)3) in a dense polymeric membrane made of polystyrene (PS) or Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV). The emission of the probe was quenched by both the temperature and by the oxygen. Moreover, the oxygen sensitivity was affected by the oxygen permeability of the membrane. The evaluation of the oxygen concentration is prone to errors since the emission of a single probe depends on several parameters (i.e. optical path, source intensity). The correction of these artefacts was obtained by the immobilization of a second luminescent molecule non-sensitive to the oxygen, Coumarin. The potential of the luminescent ratiometric sensor for the non-invasive monitoring of oxygen in food packaging using polymeric films with different oxygen permeability was evaluated. Emphasis was given to the efficiency of the optical sensor for the on-line, in-situ and non invasive monitoring of the oxygen by comparing the experimental data with a model which takes into account the oxygen permeability of the packaging materials evaluated independently. A nano-thermometer based on silica nano-particles doped with Ru(phen)3 was developed. A systematic study shows how it is possible to control the properties of the nano-particles as well as their temperature sensitivity. The nano-thermometer was immobilized on a membrane surface by dip-coating providing information about the temperature on the membrane surface. Hydrophobic porous membrane made of Poly(vinylidene fluoride) was prepared via electrospinning and employed in a direct contact membrane distillation process. Using a designed membrane module and a membrane doped with Ru

  7. Leadership styles and managerial culture at industrial enterprises with different modernization and innovation processes

    Directory of Open Access Journals (Sweden)

    Glukhov Sergei

    2017-01-01

    Full Text Available The article presents the results of an empirical research into the transformational leadership and managerial culture at industrial enterprises with different modernization and innovation processes. The authors suggest the criteria for differentiation of options of making changes at the industrial companies: the attitude to their own research base, the focus on introduction of innovations, the investment potential for the introduction of innovations, contacts with research and educational agencies, presence of institutional innovation structures in the structure. It was found out that the managerial profile of an industrial enterprise, focused on innovation activities, involves the index of transformational leadership and the managerial culture with a subject-oriented management, i.e. democratic, which is manifested in the commitment to the group decision making process; humanizing, which is manifested in the attitude towards the employees as being independently valuable regardless the context of achieving organizational results; and innovative, which is manifested in the constant quest for changes.

  8. Mastering the political Process of Building Innovation Networks - A Case from the Danish Construction Industry

    DEFF Research Database (Denmark)

    Stissing Jensen, Jens; Koch, Christian; Thomassen, Mikkel

    2008-01-01

    Drawing on network of innovation and organizational politics perspectives this paper analyzes the role of an innovation broker organization in developing and supporting an inter-organizational innovation process in the Danish construction industry. The aim is to implement an ICT-based product...... configuration tool to support the production, sale, and installation of balconies. It is suggested that the innovation broker was successful in stabilizing the innovation process by supplying minimal structures which provided a template which facilitated a combination of individual flexibility and overall...... the network. The innovation thus grew strong enough to replace existing practices and identities and to embed new ones into new organizational structures and a new business-concept...

  9. An Integrated Open Approach to Capturing Systematic Knowledge for Manufacturing Process Innovation Based on Collective Intelligence

    Directory of Open Access Journals (Sweden)

    Gangfeng Wang

    2018-02-01

    Full Text Available Process innovation plays a vital role in the manufacture realization of increasingly complex new products, especially in the context of sustainable development and cleaner production. Knowledge-based innovation design can inspire designers’ creative thinking; however, the existing scattered knowledge has not yet been properly captured and organized according to Computer-Aided Process Innovation (CAPI. Therefore, this paper proposes an integrated approach to tackle this non-trivial issue. By analyzing the design process of CAPI and technical features of open innovation, a novel holistic paradigm of process innovation knowledge capture based on collective intelligence (PIKC-CI is constructed from the perspective of the knowledge life cycle. Then, a multi-source innovation knowledge fusion algorithm based on semantic elements reconfiguration is applied to form new public knowledge. To ensure the credibility and orderliness of innovation knowledge refinement, a collaborative editing strategy based on knowledge lock and knowledge–social trust degree is explored. Finally, a knowledge management system MPI-OKCS integrating the proposed techniques is implemented into the pre-built CAPI general platform, and a welding process innovation example is provided to illustrate the feasibility of the proposed approach. It is expected that our work would lay the foundation for the future knowledge-inspired CAPI and smart process planning.

  10. Agricultural knowledge transfer and innovation processes in Vietnam's northwestern uplands

    DEFF Research Database (Denmark)

    Thai, Thi Minh; Neef, Andreas; Hoffmann, Volker

    2011-01-01

    and income generation in the uplands are adopted by a high number of farmers, but tend to be less environmentally sound. Innovations driven by political and ecological interests, i.e. of the type “adoption for political and social rewards” and “adoption for a sustainable environment,” are accepted by only...... a period of rapid growth in the recent past. Examples of this include intensive rice cultivation for household food needs and hybrid maize cultivation for market demand. This study further identified three main mechanisms of innovation diffusion, namely the trickle-down mechanism, the ripple mechanism...

  11. Applying circular economy innovation theory in business process modeling and analysis

    Science.gov (United States)

    Popa, V.; Popa, L.

    2017-08-01

    The overall aim of this paper is to develop a new conceptual framework for business process modeling and analysis using circular economy innovative theory as a source for business knowledge management. The last part of the paper presents an author’s proposed basic structure for a new business models applying circular economy innovation theories. For people working on new innovative business models in the field of the circular economy this paper provides new ideas for clustering their concepts.

  12. Process of value co-creation and its impact on innovation strategy in service companies

    Directory of Open Access Journals (Sweden)

    Antonia Ruiz-Moreno

    2014-04-01

    Full Text Available Purpose: This article analyzes the factors that influence on the capacity of service firms companies to adapt to changing environment. It analyzes how the critical dimensions of the innovation process influence the gap generated by the difference between the current level of innovation of the company and the level developed by competitors. Design/methodology/approach: Companies were selected from the database Duns and Bradstreet 2000. A sample of companies in Spain in a relatively homogeneous geographic, cultural, legal and political space was chosen. The questionnaire was sent to a total of 200 companies, most of them being large and medium enterprises. Findings and Originality/value: The results show that customer involvement in the innovation process is greater in service firms that have greater innovation gap and are more proactive. Formalization and decentralization present low innovation gap. Limitations: This study is focused on Spanish companies. This work presents the characteristics of a cross-sectional study. Practical implications: In order to better adapt to the environment, firms need to present a greater fit between results on innovation and customer expectations. Therefore, it is very important to accurately detect user needs throughout the innovation process. Originality/value: Our results provide guidance in decisions that are deliberate and which may affect the degree of proactivity of innovation in services. We have advanced in the implications of customer participation in business results. Keywords: Innovation gap, customer participation, decentralization, formalization, service firms.

  13. Characterization of Brazilian Industrial Companies’ Processes and Challenges as to Innovation Management

    Directory of Open Access Journals (Sweden)

    Marcelo Seido Nagano

    2014-09-01

    Full Text Available The goal of this study is to investigate the use of product innovation management practices and the challenges faced by organizations when increasing their innovative performance. To this end, we analyzed the relationships between internal organizational elements, as well as the influence of contextual factors (size, field and source of capital in the characterization of innovation management systems and of barriers to innovation faced by each company. We chose this topic due to the fact that management processes that leverage innovative performance are not yet fully understood, and because of the lack of empirical studies that analyze the reality of the practices proposed in the organizational world, especially in Brazil. As a conceptual basis, we presented modern approaches to innovation, which recognize that this should not be seen as an isolated event but as a process. Exploratory qualitative research was carried out by means of a multiple case study. In it, we studied the innovation management systems of four companies which present relevant product development activities in Brazil. As well as a detailed study of the elements of innovation management, this article includes contributions referring to the characterization of organizational challenges faced by organizations when managing their innovation process.

  14. The Process of Curriculum Innovations in the Army

    Science.gov (United States)

    2016-08-01

    just tell them they were wrong. The hands-on exercises were viewed as one way of developing the technical competence needed, as instructors...PowerPoint) __Soldier competencies per the Army Learning Model __Learner-centered and/or problem solving activities/ exercises /scenarios __Principles...Diffusion of Innovations, Program of Instruction, Instructional Techniques, Curriculum Development, Soldier Competencies , Army Training and Education 16

  15. Innovation-Centric Teaching and Learning Processes in Technical Education

    Science.gov (United States)

    Vikas, Om

    2012-01-01

    Globalization has put countries in competitive and collaborative mode. Underdeveloped nations are in catch-up phase, developing nations are in competitive phase and the advanced nations are in commanding phase with respect to certain technologies. Innovation--Technological, Business and Education--is imperative for sustainable socio-economic…

  16. A Complexity Perspective on Innovation Processes for Subsea Technology Development

    Science.gov (United States)

    Aasen, Tone Merethe Berg

    2009-01-01

    In today's business thinking, innovation is commonly equated with progress, indicating an underlying assumption that company management have the power to choose a specific future and control the way into it. Drawing on examples from a longitudinal research initiative in the Norwegian petroleum company StatoilHydro, this article raises some of the…

  17. Assesment of Innovation Process Capability-Based on Innovation Value Chain Model in East Java Footwear Industry

    Directory of Open Access Journals (Sweden)

    Benny Lianto

    2015-12-01

    Full Text Available This study attempts to assess the innovation process based on  innovation value chain model in footwear industry in East Java, Indonesia. A strength and weakness mapping analysis was performed and it included three factors related to company characteristics: operation scale based on number of employees, operational priod, and market orientation. The samples were 62 footwear industries, members of East Java  Indonesian Footwear Association (Aprisindo. The questionnaire was sent via email. Thirty industries (48.38% sent the questionnaire back. A focus group discussion (FGD was conducted with several representatives from footwear industry before the questionnaire was sent.  The study found that companies are relatively good at idea conversion (42,30%  but the companies have  a little difficulties at diffusion (50,80% and  at idea generation (55,80%. From the result respose show (see table.2 that the weakest links (the innovation process bottleneck is cross-pollination activity [in which the people typically don't collaborate on projects across units, businesses, or subsidiaries (88,6%],  while the strongest links is selection activity [the companies have a risk- averse attitude toward  investing in novel ideas (39,3%]. Based on p-value, the study found that company characteristics influencing a certain phase of innovation value chain significantly were company period (age of company and market orientation. Specifically, both of them influenced idea generation phase.

  18. Innovative Additive for Bitumen Based on Processed Fats

    Science.gov (United States)

    Babiak, Michał; Kosno, Jacek; Ratajczak, Maria; Zieliński, Krzysztof

    2017-10-01

    Various additives, admixtures and modifiers are used to improve technical properties and strength characteristics of building materials. Manufacturers of waterproofing materials, concrete, ceramics and bitumen have to use innovative, increasingly complex and costly additives, admixtures or modifiers. As a result, simple and inexpensive substances have been replaced by complex, long chain polymers, multi component resins or plastics. For economic and ecological reasons waste materials are more frequently used as additives, admixtures and modifiers. Nowadays the most commonly used physical modifiers of bitumen belong to the group of polymers - large molecular organic compounds of natural origin or being the result of planned chemical synthesis. Polymers are substances that do not chemically react with bitumen, they act as fillers or create a spatial network within bitumen (the so called physical cross-linking). The development of organic chemistry has allowed the synthesis of a number of substances chemically modifying bitumen. The most promising are heterocyclic organic compounds belonging to the group of imidazolines. The aim of the study presented in this paper was to demonstrate the suitability of processed natural and post-refining fat waste (diamidoamine dehydrate) as bitumen modifier. This paper discusses the impact of adding technical imidazoline on selected bitumen characteristics. Samples of bitumen 160/220, which is most commonly used for the production of waterproofing products, were analysed. For base bitumen and bitumen modified with technical imidazoline the following measurements were taken: measurement of the softening point by Ball and Ring method, determination of the breaking point by Fraass method and needle penetration measurement at 25°C. Later the samples were aged using TFOT laboratory method and the basic characteristics were determined again. The results showed that a small amount of imidazoline improved bitumen thermoplastic parameters at

  19. The sources of process innovation in user firms: an exploration of the antecedents and impact of non-R&D innovation and learning-by-doing

    OpenAIRE

    Bogers, Marcel; Foray, Dominique

    2009-01-01

    Previous research has shown that innovation can have various sources and different forms. Innovation can thus be developed by different types of organizations or individuals for several reasons, and it can be related to product or process technologies. One particular stream of research has explored the role of users as a source of innovation. Examples of user innovations can be found in a variety of fields and settings such as mountain biking, snowboarding, open source software, scientific in...

  20. Innovacionnyj process v regione Baltijskogo morja [The innovative process in the Baltic Sea region

    Directory of Open Access Journals (Sweden)

    Mäkinen Hanna

    2012-01-01

    Full Text Available In order to maintain its global competitiveness in the future, the Baltic Sea region (BSR needs to preserve and improve its technological capability and innovativeness. This article focuses on innovations in the Baltic Sea region, particularly on external innovation drivers and innovation environments in the BSR and individual countries within the region. Firstly, some definitions of innovations, innovation drivers, and characteristics of a favourable innovation environment are presented. Secondly, the current condition of innovation environments in the BSR is described and the innovation performances of Baltic countries are compared. Finally, the research aims to conclude, as well as to analyse, the future innovation development of the BSR. The research material for this desk study is collected from various sources, including journal articles, statistics, media, research reports, and other publications.

  1. The collaboration between and contribution of a digital open innovation platform to a local design process

    DEFF Research Database (Denmark)

    del Castillo, Jacqueline; Bhatti, Yasser; Hossain, Mokter

    2017-01-01

    We examine the potential of an open innovation digital platform to expose a local innovation process to a greater number of ideas and a more inclusive set of stakeholders. To do so we studied an online innovation challenge on the OpenIDEO to reimagine the end-of-life experience sponsored by Sutte...... it leads to a greater number of ideas from a wider and more inclusive set of stakeholders. We offer insights for the literatures on open innovation and design thinking in a healthcare context....

  2. Integrating Process and Factor Understanding of Environmental Innovation by Water Utilities

    NARCIS (Netherlands)

    Spiller, Marc; McIntosh, Brian S.; Seaton, Roger A.F.; Jeffrey, Paul J.

    2015-01-01

    Innovations in technology and organisations are central to enabling the water sector to adapt to major environmental changes such as climate change, land degradation or drinking water pollution. While there are literatures on innovation as a process and on the factors that influence it, there is

  3. Is the demand-pull driver equally crucial for product vs process innovation?

    NARCIS (Netherlands)

    Dawid, Herbert; Pellegrino, Gabriele; Vivarelli, Marco

    2017-01-01

    While the extant innovation literature has provided extensive evidence of the so-called "demand-pull" effect, the possible diverse impact of demand evolution on product vs process innovation activities has not been yet investigated. This paper develops a formal model predicting a larger inducing

  4. Creating a market-oriented product innovation process : A contingency approach

    NARCIS (Netherlands)

    Kok, R.A.W.; Biemans, W.G.

    This study analyzes how and why a firm's change program to create a market-oriented innovation process depends on its environmental, innovational and organizational context. Based on an organizational-learning capabilities framework, the results from a multiple case study indicate how a firm's

  5. Innovation processes in technologies for the processing of refractory mineral raw materials

    Science.gov (United States)

    Chanturiya, V. A.

    2008-12-01

    Analysis of the grade of mineral resources of Russia and other countries shows that end products that are competitive in terms of both technological and environmental criteria in the world market can only be obtained by the development and implementation of progressive technologies based on the up-to-date achievements of fundamental sciences. The essence of modern innovation processes in technologies developed in Russia for the complex and comprehensive processing of refractory raw materials with a complex composition is ascertained. These processes include (i) radiometric methods of concentration of valuable components, (ii) high-energy methods of disintegration of highly dispersed mineral components, and (iii) electrochemical methods of water conditioning to obtain target products for solving specific technological problems.

  6. Summary of innovative concepts for industrial process improvement: An experimental technology exchange

    Energy Technology Data Exchange (ETDEWEB)

    Conger, R.L. [Pacific Northwest Lab., Richland, WA (United States); Lee, V.E.; Buel, L.M. [eds.] [Pacific Northwest Lab., Richland, WA (United States)

    1995-08-01

    This document is a compilation of one-page technical briefs that summarize the highlights of thirty-eight innovations that were presented at the seventh Innovative Concepts Fair, held in Denver, Colorado on April 20--21, 1995. Sixteen of the innovations were funded through the Innovative Concepts Program, and twenty-two innovations represent other state or federally funded programs. The concepts in this year`s fair addressed innovations that can substantially improve industrial processes. Each tech brief describes the need for the proposed concept; the concept being proposed; and the concept`s economics and market potential, key experimental results, and future development needs. A contact block is also included with each flier.

  7. THE PROBLEMS IN THE EVALUATION THE RISKS ON INVESTMENTS OF INNOVATION PROCESS OF REPUBLIC OF MOLDOVA

    Directory of Open Access Journals (Sweden)

    Anatol Rotaru

    2012-12-01

    Full Text Available An innovative activity in the economy is the most important element of economic growth. This article is dedicated to research of the role of investment risk and implements innovations. It is well known that the interdependence between risk and profit, but there is a strong interrelationship between the risk of investment and innovative development of the country. In this article, the most important features of innovation for economic growth, as well as the direction of its investment, both from the government and from foreign investors and the private individuals are discussed. Based on this purpose have been characterized elements of investment risk has been made an investment risk analysis, innovation process and performance indicators. In that article presents a vision of innovation and investment activity in Moldova.

  8. Addressing the paradox of the team innovation process: A review and practical considerations.

    Science.gov (United States)

    Thayer, Amanda L; Petruzzelli, Alexandra; McClurg, Caitlin E

    2018-01-01

    Facilitating team innovation is paramount to promoting progress in the science, technology, engineering, and math fields, as well as advancing national health, safety, prosperity, and welfare. However, innovation teams face a unique set of challenges due to the novelty and uncertainty that is core to the definition of innovation, as well as the paradoxical nature of idea generation and idea implementation processes. These and other challenges must be overcome for innovation teams to realize their full potential for producing change. The purpose of this review is, thus, to provide insight into the unique context that these teams function within and provide an integrative, evidence-based, and practically useful, organizing heuristic that focuses on the most important considerations for facilitating team innovation. Finally, we provide practical guidance for psychologists, organizations, practitioners, scientists, educators, policymakers, and others who employ teams to produce novel, innovative solutions to today's problems. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  9. Strategy, Corporate Culture, Structure and Operational Processes as the Context for the Innovativeness of an Organization

    Directory of Open Access Journals (Sweden)

    Szczepańska-Woszczyna Katarzyna

    2018-03-01

    Full Text Available The paper refers to relationships between the innovativeness of an organization and its selected determinants such as strategy, corporate culture, structure and operational processes. Research was conducted among 200 managers at the top, middle and operational levels of management (200 companies operating in Poland implementing innovations - innovative companies. Conditions leading to innovations are described as the combination of processes, which result from the internal and external dynamics of a given entity. The analysis assumed that the assessment of company innovativeness would be based on an assessment of whether the company is a leader in the industry in terms of new products (the higher the rating, the more innovative the company is considered to be. The relationship between the dimensions of the company's functioning and the degree of its innovativeness was rated on the basis of two measures: the Spearman's rank correlation coefficient and the chi-square coefficient. It was assumed that the most innovative companies have structures similar to organic ones, with a weak influence of the elements of mechanistic structures. This assumption was proven in relation to features of organizations considered important for innovativeness.

  10. Organizational innovation in health care - as a process

    Directory of Open Access Journals (Sweden)

    Tatjana Mlakar

    2008-02-01

    Full Text Available Slovenia, like most countries of the modern world, spends toomuch on its public health care and supplies too little public healthcare services for the government, economists, politicians, and citizensto be happy. The many reforms of the public health care, e.g.in Slovenia, seem to be inefficient, one after the other, in solvingthis problem. Reforms have been conceived with a too poor considerationof the law of the requisite holism in decision preparation,decisions making and decision implementation. The articletackles procedure of implementation of reforms as inventions aresupposed to become innovations in the public health care organizationand management, rather than reforms’ content. Combinationof the absorption capacity, innovation promotion and diffusion issuggested for the requisite holism of implementation.

  11. PROCESS OF INNOVATION IN PRODUCT LIFECYCLE MANAGEMENT BUSINESS STRATEGY

    OpenAIRE

    VALENTINA GECEVSKA; FRANC CUS; RADMIL POLENAKOVIC; PAOLO CHABERT

    2011-01-01

    This article proposes a scenario of Product Lifecycle Management (PLM), as a innovative business strategy based on the analysis of business drivers, industry requirements, limit of current solution, and recent state-of-the-art review in the domain related to PLM. Potential industrial impact of the developed PLM technology solutions is analyzed. It is hoped that the proposed PLM technology solutions will form the frontier basis for further research, development, and application of PLM systems ...

  12. PROCESS INNOVATION: HOLISTIC SCENARIOS TO REDUCE TOTAL LEAD TIME

    Directory of Open Access Journals (Sweden)

    Alin POSTEUCĂ

    2015-11-01

    Full Text Available The globalization of markets requires continuous development of business holistic scenarios to ensure acceptable flexibility to satisfy customers. Continuous improvement of supply chain supposes continuous improvement of materials and products lead time and flow, material stocks and finished products stocks and increasing the number of suppliers close by as possible. The contribution of our study is to present holistic scenarios of total lead time improvement and innovation by implementing supply chain policy.

  13. The Future: Innovative Technologies for Radioactive Waste Processing and Disposal

    International Nuclear Information System (INIS)

    Bychkov, Alexander V.

    2014-01-01

    Safe, proliferation resistant and economically efficient nuclear fuel cycles that minimize waste generation and environmental impacts are key to sustainable nuclear energy. Innovative approaches and technologies could significantly reduce the radiotoxicity, or the hazard posed by radioactive substances to humans, as well as the waste generated. Decreasing the waste volume, the heat load and the duration that the waste needs to be isolated from the biosphere will greatly simplify waste disposal concepts

  14. Ba, Japanese-Style Knowledge Creation Concept: A Building Brick of Innovation Process inside Organization

    Directory of Open Access Journals (Sweden)

    Henry Pribadi

    2010-01-01

    Full Text Available Survival of a firm in industry will be primarily determined by how efficient it can harness competitive advantage from innovation process. Innovation process itself has strong correlation with knowledge creation, and to understand about innovation, people must understand about knowledge creation process. By successfully harnessing knowledge, people can use those resources to create some innovation product or service that in the end will provide competitive edge into the company. Unfortunately, not much research can be sought to provide more insight on the creation of knowledge inside a company. This paper explores about interesting concept of knowledge creation in Japanese term, which is called as “ba”. Ba concept can be used to describe how tacit knowledge and casual knowledge can be harnessed into a useful knowledge which in turn will be transformed into innovation process. This paper will briefly give some introduction about ba concept and how it is related to innovation process. A brief study of one multinational company will be used to describe how concept of ba is applied in understanding the success story of innovation from knowledge creation.

  15. Innovation in Enterprises in Process of Merge: a study of services and industry companies

    Directory of Open Access Journals (Sweden)

    Patricia Gonçalves Vidal

    2014-08-01

    Full Text Available The current article presents the innovation process in companies which have adopted as strategy the value creation and synergies through merger with other companies. From a theoretical foundation it aims to shed light on the theme by presenting basis to this research and the ensuing result analysis. Thus were analyzed companies from two diverse sectors of the Economy with the endeavor to prove “how” and “why” such innovation before the merger process happened and which the possible results from this analysis are. By using secondary sources, with the goal to present real and instant results of the innovation announcements of the studied enterprises, through cases and event studies, it is concluded that innovation in products and in partnerships create higher value than other sorts of innovation in short term and in the post-merger.

  16. Conceptualizing playfulness for reflection processes in responsible research and innovation contexts: a narrative literature review

    NARCIS (Netherlands)

    van der Meij, Marjoleine G.; Broerse, Jacqueline E. W.; Kupper, Frank

    2017-01-01

    Playfulness supports people in learning. This study synthesizes a framework for playfulness for one particular type of learning: responsible research and innovation (RRI) reflection processes. Playfulness design elements were extracted from literature about playfulness in various learning and

  17. IN SITU STEAM ENHANCED RECOVERY PROCESS - HUGHES ENVIRONMENTAL SYSTEMS, INC. - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    This Innovative Technology Evaluation report summarizes the findings of an evaluation of the in situ Steam Enhanced Recovery Process (SERP) operated by Hughes Environmental Systems, Inc. at the Rainbow Disposal facility in Huntington Beach, California. he technology demonstration...

  18. Sequential method for the assessment of innovations in computer assisted industrial processes

    International Nuclear Information System (INIS)

    Suarez Antola R.

    1995-01-01

    A sequential method for the assessment of innovations in industrial processes is proposed, using suitable combinations of mathematical modelling and numerical simulation of dynamics. Some advantages and limitations of the proposed method are discussed. tabs

  19. Technology Transfer and the Innovative Process in Biomedical ...

    African Journals Online (AJOL)

    ... de recherche, de même que les réunions et les conférences. Les scientifiques des pays en voie de développement sont, à différents niveaux, impliqués dans le processus de transfert de technologies. Au cours de l'exécution des activités dessus mentionnés, il peut y avoir l'un ou l'autre élément d'innovation qui intervient ...

  20. Using of dynamic strategy model in innovation process

    Directory of Open Access Journals (Sweden)

    Monika Chobotová

    2013-01-01

    Full Text Available This paper incorporates a new scenario method which can use for formulate innovation strategy. The purpose of scenario is not to identify the most likely future, but to create a map of uncertainty — to acknowledge and examine the visible and hidden forces that directed toward the unknown future of a firm. Scenarios are used for capture a range of possibilities, good and bad, expected and surprising. They are designed to stretch our thinking about emerging changes and the opportunities and threats that may occur in the future. Scenario allows us to weigh our choices more carefully when making short-term and long-term strategic decisions.

  1. Innovation, Management and Sustainability - change processes in the food service sector

    DEFF Research Database (Denmark)

    Kristensen, Niels Heine; Dahl, Astrid; Mikkelsen, Bent Egberg

    2005-01-01

    Kristensen NH, Thorsen AV, Dahl A, Engelund EH, Mikkelsen BE (2005): Innovation, Management and Sustainability - change processes in the food service sector. Chapter in "Culinary Arts and Sciences V - Global and National Perspectives". Bournemouth University. ISBN 1-85899-179-X......Kristensen NH, Thorsen AV, Dahl A, Engelund EH, Mikkelsen BE (2005): Innovation, Management and Sustainability - change processes in the food service sector. Chapter in "Culinary Arts and Sciences V - Global and National Perspectives". Bournemouth University. ISBN 1-85899-179-X...

  2. PROCESSORS’ PERCEPTION OF THE EFFECTIVENESS OF SOME CASSAVA PROCESSING INNOVATIONS IN OGUN STATE, NIGERIA

    OpenAIRE

    Adebayo, K.; Sangosina, M.A.

    2005-01-01

    The current drive towards higher levels of commercialisation of cassava processing under the Presidential Initiative on Cassava requires that the scale of cassava processing be increased in Nigeria. Primary data obtained from 112 respondents selected from the 4 extension zones of Ogun State was used to examine the perception of effectiveness of innovations by cassava processors and the factors responsible for adoption of these innovations. The processors’ perception of effectiveness of cassav...

  3. Understanding Managers Decision Making Process for Tools Selection in the Core Front End of Innovation

    DEFF Research Database (Denmark)

    Appio, Francesco P.; Achiche, Sofiane; McAloone, Tim C.

    2011-01-01

    New product development (NPD) describes the process of bringing a new product or service to the market. The Fuzzy Front End (FFE) of Innovation is the term describing the activities happening before the product development phase of NPD. In the FFE of innovation, several tools are used to facilita...... hypotheses are tested. A preliminary version of a theoretical model depicting the decision process of managers during tools selection in the FFE is proposed. The theoretical model is built from the constructed hypotheses....

  4. The Knowledge Management for Innovation Processes for SME Sector Companies

    Directory of Open Access Journals (Sweden)

    Tomasz Norek

    2013-01-01

    Full Text Available The complexity and variability of the modern economy means that the informationbecomes a key resource, essential for the proper functioning of anyenterprise and in the broader sense of the country and the national economy.Currently, practically all areas of modern economics are grappling withthe problem of information management, both in theory and practice. It isespecially visible in the attempts to support knowledge management in theareas, which are considered core from the viewpoint of increasing marketcompetitiveness of the company. Knowledge management in the field of company’sinnovative potential or in the area of intellectual capital may serve asan example. This situation forces the search for new solutions of knowledgemanagement in the field of research and evaluation of the innovative potentialof companies. The main purpose of this article is to present an Internetplatform for innovation audit, as a tool which supports knowledge management.An additional goal of this article is to present the preliminary results ofa research carried out by means of the described tools.

  5. Innovation patterns in sustainable tourism

    DEFF Research Database (Denmark)

    Hjalager, Anne Mette

    1997-01-01

    to the environment. The following types of innovation can be distinguished: product innovations, classical process innovations, process innovations in information handling, management innovations and institutional innovations. The article concludes that innovations are predominantly launched as part of defensive...

  6. Innovation

    African Journals Online (AJOL)

    Natal, South Africa are presented in this article. Of particular interest is how the combination of adult and early literacy activities has encouraged reading in families. The evaluative process involved individual qualitative interviews, material review ...

  7. Strategic orientations and cooperation of external agents in the innovation process of rural enterprises

    Directory of Open Access Journals (Sweden)

    José Francisco dos Reis Neto

    Full Text Available ABSTRACT: This article provides empirical evidence for the relationship between the market orientation, entrepreneurial orientation, and collaboration of external actors in the processes of incremental and radical innovations in rural enterprises. The research tested two sets of assumptions: first, the relation between contributions of strategic orientation and innovation processes; and second, collaborations of external stakeholders in the implementation of innovation processes. Data were collected from 208 rural enterprises and analyzed with the use of techniques of partial least squares structural equation modeling. Results showed that the market orientation contributes to the development of incremental innovation, and that the entrepreneurial orientation contributes to the implementation of the incremental and radical innovations. Specific agents (buyers, suppliers of goods and services, consultants, and others producers, collaborate positively in implementing incremental innovation; however, generic agents do not. The generic agents (universities and specialized public organizations are the ones that most intervene in radical innovations. The use of consistent theory in the areas of strategy, marketing and management in identifying that some of their causal relationships are confirmed for rural businesses unlike others, due to the structure of the market and the products produced by them.

  8. Process Approach to Formation of the Strategy of Innovation Development of Enterprises

    Directory of Open Access Journals (Sweden)

    Yukhymenko Vita V.

    2013-12-01

    Full Text Available The article considers the process of formation of the strategy of innovation development on the basis of the process approach. The author studies and identifies the most significant cause-effect interrelations between the factors that influence efficiency of the process of formation of the strategy of innovation development of enterprises and their consequences. The article offers a process approach to building the K. Ishikawa diagram based on empirical assessment of management of business processes at railway engineering enterprises. The author’s approach would help solving multiple problems of railway engineering and also could be used in other sectors of economy.

  9. The role of knowledge in the processes of creating and implementing innovations

    Directory of Open Access Journals (Sweden)

    Baruk Jerzy

    2016-09-01

    Full Text Available The dynamics of changes taking place in the environment of organizations encourages them to design and implement internal changes allowing to sustain the balance between the organizations and their environment. These changes concern the formulation of the main goal of an organization, process and structural solutions, management concept, relations with clients, a different look at resources, using knowledge as a source of innovation etc. One of the conditions for the functioning and development of contemporary organizations is systemic utilization of knowledge for solving the emerging problems, including the creation of innovations. Satisfying this condition requires using knowledge in management. The purpose of this work is to show that knowledge plays a fundamental role in the processes of generating and implementing innovation, that’s why the process of creating innovation has to be manager in a rational way, according to the proposed models.

  10. The relationship between innovation and price variation process innovations and product; La Relacion entre innovacion y variacion de los precios innovaciones de proceso y de producto

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez, X.; Miles-Touya, D.; Pazo, C.

    2012-07-01

    The aim of this study is to analyze the relationship between innovation and price changes, distinguishing between process and product innovations. The former directly affects production costs, the changes of which could be transferred to prices. The latter enables companies to differentiate their products vertically or horizontally and increases the consumers willingness to pay, which may lead companies to raise prices. The results show that firms that introduce product innovations are more likely to raise prices and firms that introduce process innovations are more likely to reduce them. The magnitudes of the effects are different. (Author)

  11. An Analysis of the Credit Card Program Using Process Innovation

    National Research Council Canada - National Science Library

    Braney, Ronald

    1999-01-01

    .... This goes a long way toward improving and streamlining the contracting process. One of the key reform initiatives in streamlining the process is the implementation of the Government-wide credit card program...

  12. Methods of assessing functioning of organizational and economic mechanism during innovation process implementation

    Directory of Open Access Journals (Sweden)

    Blinkov Maksim

    2017-01-01

    Full Text Available This paper proposes methods of assessing the efficiency of organizational and economic mechanism of an industrial enterprise when implementing innovation processes. These methods allow continuous monitoring at all stages of innovation process implementation, lead to reduction in costs of innovation activity and enable maximum use of the creative potential of enterprise personnel. The significance and attractiveness of this method is ensured by the fact that it can be applied by industrial companies in any market fields regardless of the lifecycle stage applicable to the studied goods, company and/or innovative process because the composition and the number of specific indicators can be adjusted by the work group both before the study and in the course of the company’s innovative activities (at any stage of their implementation. The multi-sided approach proposed for assessing the efficiency of organizational and economic mechanism of the industrial enterprise when implementing innovation processes ensures full and accurate assessment of the impact of certain factors on the final result.

  13. User roles and contributions during the new product development process in collaborative innovation communities.

    Science.gov (United States)

    Guo, Wei; Zheng, Qing; An, Weijin; Peng, Wei

    2017-09-01

    Collaborative innovation (co-innovation) community emerges as a new product design platform where companies involve users in the new product development (NPD) process. Large numbers of users participate and contribute to the process voluntarily. This exploratory study investigates the heterogeneous roles of users based on a global co-innovation project in online community. Content analysis, social network analysis and cluster method are employed to measure user behaviors, distinguish user roles, and analyze user contributions. The study identifies six user roles that emerge during the NPD process in co-innovation community: project leader, active designer, generalist, communicator, passive designer, and observer. The six user roles differ in their contribution forms and quality. This paper contributes to research on co-innovation in online communities, including design team structure, user roles and their contribution to design task and solution, as well as user value along the process. In addition, the study provides practices guidance on implementing project, attracting users, and designing platform for co-innovation community practitioners. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. IPP (Innovation in Products and Processes) For the sector of mineral raw materials and energy

    International Nuclear Information System (INIS)

    Correa E, Alexander; Alvarez, Carlos; Rodriguez, Andres

    2009-01-01

    This article presents the results of the research project IPP (process and product innovation) which is a systemic and thorough analysis of production chains, based on the study - productivity and processes. This project is working in 4 phases: Intelligence, experimentation, innovation, and technological appropriation, These steps are aimed at continuous improvement of processes, Products of the organization and the interactions between actors in the production of mineral raw materials and energy. In the intelligence phase, we studied the characteristics, needs, market, and environment of the production chain that are the result of the use of natural resources and environment. In the second phase, characterized the development, design and implementation of prototype products and processes that emulate the behavior of the process in a real system and are environmentally friendly. Taking into account the first two phases in the third, saw the formulation and design new processes and products that improve efficiency and productivity. In the last phase of the project is the service that seeks to appropriate technological innovation and knowledge transfer from one end to the chain. Finally the result of the proposed IPP is a center of innovation and development of logistic practices within the National University of Colombia to ensure the ownership and suitability of the solutions to the production chains is an innovation for the mining sector, materials and energy with the early-friendly products and processes with the environment.

  15. Innovation in the processes of formation and training of nuclear professionals

    International Nuclear Information System (INIS)

    Ruiz Martinez, F. J.; Lambistos Agustin, A.

    2015-01-01

    Innovation is the intoduction of new products and services, new processes, new sources of supply and changes in industrial organization, and continuous customer, consumer or user oriented (J. A. Schumpeter). According to this idea, three mental restrictions usually apply to the innovative break: not only are new products, not only are technological developments, not only are revolutionary ideas so also. From the innovative tradition of Tecnatom Formacion Nuclear materailized in examples like the SGI or Human Factors simulators, in recent years has made considerable progress in the function with innovative solutions to improve the results of nuclear power plants, made available to our customers, as significant as the Training Programs for Shift Supervisors, the OJT/TPE processes, seminars Diagnostic Techniques, EDMG Simulator or ROI and ROIF projects. (Author)

  16. Managing innovation as communicative processes: a case of subsea technology R&D

    Directory of Open Access Journals (Sweden)

    Johannessen, S.

    2009-01-01

    Full Text Available Exploration of the communicative nature of innovation processes and the impact of this on innovation management has largely been ignored in innovation research. This paper suggests that the adoption of a complex responsive processes perspective opens up for insight and implications that depart from the prevailing view of what it means to manage joint efforts for innovation in business organizations. A key contribution is the suggestion that a change of perspective on organizations from conceptions of 'whole' to notions of joint human interaction implies a need to increase management attention to the detail of local interaction between people striving to construct meaning out of new and ongoing themes, for the company and for them. We base our claims on an empirical example, drawn on a longitudinal research initiative conducted in cooperation with the Norwegian petroleum company Statoil.

  17. Innovation processes in the field of energy technology; Innovationsprozesse bei Energietechnologien

    Energy Technology Data Exchange (ETDEWEB)

    Berwert, A.; Zehnder, M. [Ruetter und Partner, Rueschlikon (Switzerland); Markard, J.; Wirth, S. [Circus, EAWAG, Duebendorf (Switzerland)

    2008-06-15

    This comprehensive report for the Swiss Federal Office of Energy (SFOE) examines the innovation process as described in a number of case studies. The case studies include three projects in the photovoltaics area - Flexcell, Oerlikon Solar and SolarMax - a combined heat and power project - SwissMotor - two heat-pump tumblers from Schulthess and V-Zug, two inverter projects - Drivetek and Vivatek and two projects in the wood gasification area - 'Pyroforce/CTU' and 'dasagren'. For each case study a short description, technological and organisational milestones and the environment in which the innovation work took place are noted, along with factors that helped or hindered innovation. Also, the basic aspects of each case are discussed. On the basis of this work, suggestions on how the innovation process can be enhanced are discussed.

  18. Towards improved policy processes for promoting innovation in renewable electricity technologies in the UK

    International Nuclear Information System (INIS)

    Foxon, T.J.; Pearson, P.J.G.

    2007-01-01

    This paper analyses recent, current and potential future relations between policy processes and substantive outcomes in UK low carbon innovation policy, focussing on policies relating to renewable electricity generation technologies. It examines the development of policy processes relating to the adoption and implementation of the Renewables Obligation and how these may affect the current and likely future success of the Obligation in promoting low carbon innovation. It examines the new policy and institutional processes put in place in the 2003 Energy White Paper and argues that these are unlikely to provide the strategic long-term framework needed to realise the ambitious goals for UK energy policy set out in the White Paper. Finally, it outlines some suggestions for further development of policy processes to facilitate improved delivery of these goals, based on guiding principles for sustainable innovation policy processes, developed by the authors and their colleagues

  19. Method for innovative synthesis-design of chemical process flowsheets

    DEFF Research Database (Denmark)

    Kumar Tula, Anjan; Gani, Rafiqul

    Chemical process synthesis-design involve the identification of the processing route to reach a desired product from a specified set of raw materials, design of the operations involved in the processing route, the calculations of utility requirements, the calculations of waste and emission...... to the surrounding and many more. Different methods (knowledge-based [1], mathematical programming [2], hybrid, etc.) have been proposed and are also currently employed to solve these synthesis-design problems. D’ Anterroches [3] proposed a group contribution based approach to solve the synthesis-design problem...... of chemical processes, where, chemical process flowsheets could be synthesized in the same way as atoms or groups of atoms are synthesized to form molecules in computer aided molecular design (CAMD) techniques [4]. That, from a library of building blocks (functional process-groups) and a set of rules to join...

  20. MANAGEMENT OF A COMPANY’S ECONOMIC SUSTAINABILITY IN THE PROCESS OF INNOVATIVE PROJECTS IMPLEMENTATION

    Directory of Open Access Journals (Sweden)

    Juliana M. Sulejmanova

    2013-01-01

    Full Text Available The article is devoted to management of a company’s sustainability in the process of innovative projects implementation. The author suggests using dynamic index named aggregated index of a company’s economic stability. Criteria of choosing innovative projects to be implemented are worked out. These criteria add traditional estimation and take into account changing company’s economic stability at every stage of project lifecycle.

  1. Fostering Organizational Innovation based on modeling the Marketing Research Process through Event-driven Process Chain (EPC

    Directory of Open Access Journals (Sweden)

    Elena Fleacă

    2016-11-01

    Full Text Available Enterprises competing in an actual business framework are required to win and maintain their competitiveness by flexibility, fast reaction and conformation to the changing customers' needs based on innovation of work related to products, services, and internal processes. The paper addresses these challenges which gain more complex bonds in a case of high pressure for innovation. The methodology commences with a literature review of the current knowledge on innovation through business processes management. Secondly, it has been applied the Event-driven Process Chain tool from the scientific literature to model the variables of marketing research process. The findings highlight benefits of marketing research workflow that enhances the value of market information while reducing costs of obtaining it, in a coherent way.

  2. Impacts of Interactive and Diagnostic Control System Use on the Innovation Process

    Directory of Open Access Journals (Sweden)

    Fábio Frezatti

    2017-10-01

    Full Text Available This research explores the innovation process in organizations based on the Management Control System (MCS. We examined the link between the diagnostic and interactive uses of management control systems and their association with the intensity of the innovation process. Motivations for the research are: (a enhance the potentiality of the model by including variables that are external to the organization, and (b offer an empirical emergent country perspective on innovation. The study is quantitative and the data were collected by means of a survey questionnaire involving a sample of 121 Brazilian companies. The analysis was supported by structural equation modeling. The contributions are: (a enhancement of the model by including the influences exerted by external stimuli on the intensity of innovation, (b confirmation of the utility of the model in an emergent country, and (c despite the controversial literature, highlighting the importance of the interactive use of the Management Control Systems process, by offering an empirical perspective on innovation control. A positive implication of the findings relates to the use of a broader and not exclusively internal model to increase its potentiality, reflecting the organizational reality by including the dynamism of external stimuli and the innovation control perspective.

  3. Sustaining Innovation: Developing an Instructional Technology Assessment Process

    Science.gov (United States)

    Carmo, Monica Cristina

    2013-01-01

    This case study developed an instructional technology assessment process for the Gevirtz Graduate School of Education (GGSE). The theoretical framework of Adelman and Taylor (2001) guided the development of this instructional technology assessment process and the tools to aid in its facilitation. GGSE faculty, staff, and graduate students…

  4. Pharmacy Dashboard: An Innovative Process for Pharmacy Workload and Productivity.

    Science.gov (United States)

    Kinney, Ashley; Bui, Quyen; Hodding, Jane; Le, Jennifer

    2017-03-01

    Background: Innovative approaches, including LEAN systems and dashboards, to enhance pharmacy production continue to evolve in a cost and safety conscious health care environment. Furthermore, implementing and evaluating the effectiveness of these novel methods continues to be challenging for pharmacies. Objective: To describe a comprehensive, real-time pharmacy dashboard that incorporated LEAN methodologies and evaluate its utilization in an inpatient Central Intravenous Additives Services (CIVAS) pharmacy. Methods: Long Beach Memorial Hospital (462 adult beds) and Miller Children's and Women's Hospital of Long Beach (combined 324 beds) are tertiary not-for-profit, community-based hospitals that are served by one CIVAS pharmacy. Metrics to evaluate the effectiveness of CIVAS were developed and implemented on a dashboard in real-time from March 2013 to March 2014. Results: The metrics that were designed and implemented to evaluate the effectiveness of CIVAS were quality and value, financial resilience, and the department's people and culture. Using a dashboard that integrated these metrics, the accuracy of manufacturing defect-free products was ≥99.9%, indicating excellent quality and value of CIVAS. The metric for financial resilience demonstrated a cost savings of $78,000 annually within pharmacy by eliminating the outsourcing of products. People and value metrics on the dashboard focused on standard work, with an overall 94.6% compliance to the workflow. Conclusion: A unique dashboard that incorporated metrics to monitor 3 important areas was successfully implemented to improve the effectiveness of CIVAS pharmacy. These metrics helped pharmacy to monitor progress in real-time, allowing attainment of production goals and fostering continuous quality improvement through LEAN work.

  5. Pharmacy Dashboard: An Innovative Process for Pharmacy Workload and Productivity

    Science.gov (United States)

    Bui, Quyen; Hodding, Jane; Le, Jennifer

    2017-01-01

    Background: Innovative approaches, including LEAN systems and dashboards, to enhance pharmacy production continue to evolve in a cost and safety conscious health care environment. Furthermore, implementing and evaluating the effectiveness of these novel methods continues to be challenging for pharmacies. Objective: To describe a comprehensive, real-time pharmacy dashboard that incorporated LEAN methodologies and evaluate its utilization in an inpatient Central Intravenous Additives Services (CIVAS) pharmacy. Methods: Long Beach Memorial Hospital (462 adult beds) and Miller Children's and Women's Hospital of Long Beach (combined 324 beds) are tertiary not-for-profit, community-based hospitals that are served by one CIVAS pharmacy. Metrics to evaluate the effectiveness of CIVAS were developed and implemented on a dashboard in real-time from March 2013 to March 2014. Results: The metrics that were designed and implemented to evaluate the effectiveness of CIVAS were quality and value, financial resilience, and the department's people and culture. Using a dashboard that integrated these metrics, the accuracy of manufacturing defect-free products was ≥99.9%, indicating excellent quality and value of CIVAS. The metric for financial resilience demonstrated a cost savings of $78,000 annually within pharmacy by eliminating the outsourcing of products. People and value metrics on the dashboard focused on standard work, with an overall 94.6% compliance to the workflow. Conclusion: A unique dashboard that incorporated metrics to monitor 3 important areas was successfully implemented to improve the effectiveness of CIVAS pharmacy. These metrics helped pharmacy to monitor progress in real-time, allowing attainment of production goals and fostering continuous quality improvement through LEAN work. PMID:28439134

  6. Innovation process and needs of sustainability driven small firms

    NARCIS (Netherlands)

    Molenaar, N.; Keskin, D.; Diehl, J.C.; Lauche, K.

    2010-01-01

    Traditional approaches to sustainable consumption and production emphasized addressing issues related to the natural environment and sustainability through optimizing existing products, processes and businesses. Even though the conventional wisdom suggests that young and new firms have greater

  7. Computer Aided Synthesis of Innovative Processes: Renewable Adipic Acid Production

    DEFF Research Database (Denmark)

    Rosengarta, Alessandro; Bertran, Maria-Ona; Manenti, Flavio

    2017-01-01

    A promising biotechnological route for the production of adipic acid from renewables has been evaluated, applying a systematic methodology for process network synthesis and optimization. The method allows organizing in a structured database the available knowledge from different sources (prelimin...

  8. Learning while (re-)configuring: business model innovation processes in established firms

    NARCIS (Netherlands)

    Berends, J.J.; Smits, A.; Reymen, I.M.M.J.; Podoynitsyna, K.S.

    2016-01-01

    This study addresses the question of how established organizations develop new business models over time, using a process research approach to trace how four business model innovation trajectories unfold. With organizational learning as analytical lens, we discern two process patterns: “drifting”

  9. Interfirm collaboration in the Fuzzy Front-End of the innovation process

    DEFF Research Database (Denmark)

    Jørgensen, Jacob Høj; Goduscheit, René Chester; Bergenholtz, Carsten

    , marketing, sales. The focus of this paper is on collaboration where innovation is the main part of the collaborative effort. Innovation refers to the research and development (R&D) activity devoted to increasing scientific or technical knowledge and the application of that knowledge to the creation of new...... and tendencies in formal R&D partnering relations. This paper, however, focuses on collaboration between independent companies prior to such formal agreements as joint ventures or other contractual agreements. This first phase of the innovation process is often referred to as the Fuzzy Front-End (FFE....... In this article we examine the characteristics of the FFE phase and explore this phase in an inter-firm perspective. Through an in-depth case-study of a single firm and its innovation partners we identify parameters for improved collaboration in the FFE. In conclusion we outline a model for inter...

  10. Design ampersand construction innovations of the defense waste processing facility

    International Nuclear Information System (INIS)

    McKibben, J.M.; Pair, C.R.; Bethmann, H.K.

    1990-01-01

    Construction of the Defense Waste Processing Facility (DWPF) at the Savannah River Site (SRS) is essentially complete. The facility is designed to convert high-level radioactive waste, now contained in large steel tanks as aqueous salts and sludge, into solid borosilicate glass in stainless steel canisters. All processing of the radioactive material and operations in a radioactive environment will be done remotely. The stringent requirements dictated by remote operation and new approaches to the glassification process led to the development of a number of first-of-a-kind pieces of equipment, new construction fabrication and erection techniques, and new applications of old techniques. The design features and construction methods used in the vitrification building and its equipment were to accomplish the objective of providing a state-of-the-art vitrification facility. 3 refs., 10 figs

  11. The aluminum smelting process and innovative alternative technologies.

    Science.gov (United States)

    Kvande, Halvor; Drabløs, Per Arne

    2014-05-01

    The industrial aluminum production process is addressed. The purpose is to give a short but comprehensive description of the electrolysis cell technology, the raw materials used, and the health and safety relevance of the process. This article is based on a study of the extensive chemical and medical literature on primary aluminum production. At present, there are two main technological challenges for the process--to reduce energy consumption and to mitigate greenhouse gas emissions. A future step may be carbon dioxide gas capture and sequestration related to the electric power generation from fossil sources. Workers' health and safety have now become an integrated part of the aluminum business. Work-related injuries and illnesses are preventable, and the ultimate goal to eliminate accidents with lost-time injuries may hopefully be approached in the future.

  12. Innovative processes for the treatment of radioactive liquid wastes

    International Nuclear Information System (INIS)

    Pacary, V.; Barre, Y.; Plasari, E.

    2008-01-01

    Full text of publication follows: Because of the high salinity (0.5 to 2 M) of liquid wastes and the variability of their composition, the method which is the most appropriate and commonly used to remove the contaminants consists in the in situ formation of adsorbent particles in the waste stream. This technique is often called coprecipitation. To increase the efficiency of this treatment, a study is performed to point out the impact of the choice of the process and the influence of operating parameters (mean residence time, stirring speed, etc.) on the formation of crystals and ultimately on their ability to capture radionuclide. Barium sulphate was chosen as a reference because it is a well known precipitate and a material used in the decontamination facilities to remove radiostrontium. Two issues are encountered with the classic treatments which are consequences of the variability of effluents composition. On the one hand when high activity effluents have to be treated, the efficiency of the classic processes can not be sufficient and the liquid must be once again decontaminated. Thus the volume of disposal waste produced by the treatment is doubled. On the other hand when low activity effluents have to be treated, the classic processes produce a low activity waste. Consequently the volume of storage occupied by this waste is disproportionate with regard to its low activity. To return the more flexible process, various configurations were tested. They can be classified in two categories: improvements of the classic treatments and new types of reactors. Because of the good results which are obtained, these processes are patent pending. To support the experimental investigations, a modelling study at the reactor scale is initiated to distinguish the influence of each process parameter. These models assume that the surface of adsorbent particles is continuously renewed by crystal growth. The aim of this work is to determine the decisive parameters which allow the

  13. Sustainable flexible process innovation. Towards a new building design approach

    NARCIS (Netherlands)

    Brand, G.J.W. van den; Quanjel, E.; Zeiler, W.

    2001-01-01

    Developers and investors ofresidential and office buildings are facing large risks. A yearly loss ofcapital of approximately 50 billion EURO can be reduced by improvement of the design process. The need for more sustainable and end user oriented buildings on a background ofthe dynamics ofever

  14. Innovations in Play Therapy: Issues, Process, and Special Populations.

    Science.gov (United States)

    Landreth, Garry L., Ed.

    This book is a compilation of discussions on current issues in play therapy. It is designed to help therapists fill in the gaps about working with special populations, which is often not directly addressed in other play therapy resources. The object of the book is to bring together information related to issues and dynamics of the process of this…

  15. An innovative service process development based on a reference model

    Directory of Open Access Journals (Sweden)

    Lorenzo Sanfelice Frazzon

    2015-06-01

    Full Text Available This article examines the new service development (NSD process, focusing specifically in a case of a financial service, guided by the following research questions: what are the processes and practices used in the development and design of new financial services? How the results of the financial NSD proposal reflects on the NSD are as a whole? Therefore, the study aims to show and describe a financial service development, conducted at Helpinveste. The paper focuses on the Conceptual Design service (activities: definition of specifications and development of alternative solutions for the service and Service Process Design (Service Representation phases. The methodological procedures are based on the process approach, using a reference model for developing new services. In order to operationalize the model, several techniques for the various stages of the project were used, e.g. QFD and Service Blueprint. Lastly, conclusions report contributions from the reference model application, both theoretical and practical contributions, as well the limitations and further research recommendations.

  16. Towards Cross-Organizational Innovative Business Process Interoperability Services

    Science.gov (United States)

    Karacan, Ömer; Del Grosso, Enrico; Carrez, Cyril; Taglino, Francesco

    This paper presents the vision and initial results of the COIN (FP7-IST-216256) European project for the development of open source Collaborative Business Process Interoperability (CBPip) in cross-organisational business collaboration environments following the Software-as-a-Service Utility (SaaS-U) paradigm.

  17. OVERVIEW OF INTERNATIONAL PUBLICATIONS ON THE INNOVATION PROCESS: A BIBLIOMETRIC STUDY

    Directory of Open Access Journals (Sweden)

    Rodrigo Marques de Almeida Guerra

    2015-03-01

    Full Text Available Bibliometric Studies concepts. There were five stages for the configuration of this article: identification of the keyword, Innovation Process, and selection of the search criteria; selection of articles and listing them according to the number of citations under the search criteria; selection of the ten articles with the highest number of citations; analysis of the selected articles; and discussion about the conclusions. The study makes it possible to identify which are the main published articles on Innovation Process based on the number of citations, length of time and date, countries, areas of knowledge, journals, authors and universities of publication. According to the findings, it seems advisable for developing countries’ scholars to foster further research on Innovation Process, as well as more productions on Bibliometric Research as a whole.

  18. When Process Is Getting in the Way of Creativity and Innovation

    DEFF Research Database (Denmark)

    Müller, Sune Dueholm; Ulrich, Frank; Nielsen, Peter Axel

    2014-01-01

    these process models and quality standards influence organizational cultures that enhance creativity and innovation is, however, under-researched within the field. Using a software analysis tool built on the competing values framework, we set out to investigate how commonly used process models and quality...... standards promote cultures of creativity and innovation. Our findings are overwhelmingly negative as the analyzed models and standards clearly promote an organizational culture emphasizing stability and control rather than creativity and innovation. To reconcile our findings with the nature of these models...... and standards, we suggest a new way forward by providing managers with theory-based guidelines to cope with cultural challenges of process improvement and quality management....

  19. Value driven innovation in medical device design: a process for balancing stakeholder voices.

    Science.gov (United States)

    de Ana, F J; Umstead, K A; Phillips, G J; Conner, C P

    2013-09-01

    The innovation process has often been represented as a linear process which funnels customer needs through various business and process filters. This method may be appropriate for some consumer products, but in the medical device industry there are some inherent limitations to the traditional innovation funnel approach. In the medical device industry, there are a number of stakeholders who need to have their voices heard throughout the innovation process. Each stakeholder has diverse and unique needs relating to the medical device, the needs of one may highly affect the needs of another, and the relationships between stakeholders may be tenuous. This paper describes the application of a spiral innovation process to the development of a medical device which considers three distinct stakeholder voices: the Voice of the Customer, the Voice of the Business and the Voice of the Technology. The process is presented as a case study focusing on the front-end redesign of a class III medical device for an orthopedics company. Starting from project initiation and scope alignment, the process describes four phases, Discover, Envision, Create, and Refine, and concludes with value assessment of the final design features.

  20. LCA as a Tool for Assessing Product and Process Oriented Eco-Innovations Undertaken by Enterprises

    Directory of Open Access Journals (Sweden)

    Rybaczewska-Błażejowska Magdalena

    2017-09-01

    Full Text Available This paper examines the application of life cycle assessment (LCA as an approach to foster the product and process oriented eco- innovation of enterprises, using the fruit and vegetable processing plant as an example. LCA, which is traditionally used to assess the impacts of a single product system on the environment, was applied in the enterprise context. This was made possible by forming an indicator describing the environmental profile of an enterprise, which is calculated by the sum of the multiplication of the environmental impact assessment (LCIA results for individual unit processes within a particular impact category and their weights reflecting the structure of production in an enterprise. In order to distinguish and indicate the direction in which an enterprise should undertake its eco-innovative actions (implementing eco-innovations within the product or production process the LCIA results are presented individually for products and production processes. The research was conducted in full compliance with the LCA methodology. LCA proved that the analysed enterprise has the largest negative impacts on the environment in the following impact categories: marine eco-toxicity, freshwater eco-toxicity, freshwater eutrophication, human toxicity and natural land transformation. They result primarily from the consumption of thermal and electric energy in the production processes. Therefore, to improve energy efficiency, the enterprise should take eco-innovative actions in the processes applied.

  1. The Aluminum Smelting Process and Innovative Alternative Technologies

    Science.gov (United States)

    Drabløs, Per Arne

    2014-01-01

    Objective: The industrial aluminum production process is addressed. The purpose is to give a short but comprehensive description of the electrolysis cell technology, the raw materials used, and the health and safety relevance of the process. Methods: This article is based on a study of the extensive chemical and medical literature on primary aluminum production. Results: At present, there are two main technological challenges for the process—to reduce energy consumption and to mitigate greenhouse gas emissions. A future step may be carbon dioxide gas capture and sequestration related to the electric power generation from fossil sources. Conclusions: Workers' health and safety have now become an integrated part of the aluminum business. Work-related injuries and illnesses are preventable, and the ultimate goal to eliminate accidents with lost-time injuries may hopefully be approached in the future. PMID:24806723

  2. Omissions in managing knowledge in innovation processes or how to handle knowledge, humans and tasks : A semio-cognitive approach

    NARCIS (Netherlands)

    Cijsouw, R. S.; Jorna, R. J.; Rakhorst, G.; Verkerke, G. J.; Charrel, PJ; Galarreta, D

    2007-01-01

    In organizations, innovation is a long-lasting process that is difficult to manage. Innovation is characterized by the use of new (combinations of) knowledge. Innovation, as knowledge creation, is also an activity of individuals. However, neither the individual nor knowledge is studied as

  3. THEORETICAL JUSTIFICATION OF THE CONCEPT OF INNOVATION DEVELOPMENT OF BUSINESS PROCESSES IN THE COMPANY

    Directory of Open Access Journals (Sweden)

    Galina G. Garanina

    2014-01-01

    Full Text Available This article contains theoretical and practical justification of the concept of innovative development of business processes based on the information analysis of the company’s infrastructure under the conditions of building a common information space. This study focuses on the supporting business processes update, on the documented information processing based on the state-of-the-art information technology solutions in particularly.The factors preventing an enterprise to build a common information space are highlighted in this study. The functional set of the management areas is examined and the degree of state-of-the-art information technology utilization to support the company’s process areas is analyzed. It is proposed to overcome the identified barriers through the automation of the company’s process areas and innovative development of supporting business processes of documented information processing by using modern information technology resources.

  4. Lean Six Sigma applied to a process innovation in a mexican health institute's imaging department.

    Science.gov (United States)

    Garcia-Porres, J; Ortiz-Posadas, M R; Pimentel-Aguilar, A B

    2008-01-01

    Delivery of services to a patient has to be given with an acceptable measure of quality that can be monitored through the patient's satisfaction. The objective of this work was to innovate processes eliminating waste and non value-added work in processes done at the Imaging Department in the National Institute of Respiratory Diseases (INER for its Spanish acronym) in Mexico City, to decrease the time a patient spends in a study and increase satisfaction. This innovation will be done using Lean Six Sigma tools and applied in a pilot program.

  5. Curriculum reform and evolution: Innovative content and processes at one US medical school.

    Science.gov (United States)

    Fischel, Janet E; Olvet, Doreen M; Iuli, Richard J; Lu, Wei-Hsin; Chandran, Latha

    2018-03-11

    Curriculum reform in medical schools continues to be an ever-present and challenging activity in medical education. This paper describes one school's experiences with specific curricular innovations that were developed or adapted and targeted to meet a clear set of curricular goals during the curriculum reform process. Those goals included: (a) promoting active learning and learner engagement; (b) establishing early professional identity; and (c) developing physician competencies in an integrated and contextual manner while allowing for individualized learning experiences for the millennial student. Six specific innovations championed by the school are described in detail. These included Themes in Medical Education, Translational Pillars, Stony Brook Teaching Families, Transition Courses, Educational Continuous Quality Improvement Processes, and our Career Advising Program. Development of the ideas and design of the innovations were done by faculty and student teams. We discuss successes and ongoing challenges with these innovations which are currently in the fourth year of implementation. Our curriculum reform has emphasized the iterative process of curriculum building. Based on our experience, we discuss general and practical guidelines for curriculum innovation in its three phases: setting the stage, implementation, and monitoring for the achievement of intended goals.

  6. A whole-process progressive training mode to foster optoelectronic students' innovative practical ability

    Science.gov (United States)

    Zhong, Hairong; Xu, Wei; Hu, Haojun; Duan, Chengfang

    2017-08-01

    This article analyzes the features of fostering optoelectronic students' innovative practical ability based on the knowledge structure of optoelectronic disciplines, which not only reveals the common law of cultivating students' innovative practical ability, but also considers the characteristics of the major: (1) The basic theory is difficult, and the close combination of science and technology is obvious; (2)With the integration of optics, mechanics, electronics and computer, the system technology is comprehensive; (3) It has both leading-edge theory and practical applications, so the benefit of cultivating optoelectronic students is high ; (4) The equipment is precise and the practice is costly. Considering the concept and structural characteristics of innovative and practical ability, and adhering to the idea of running practice through the whole process, we put forward the construction of three-dimensional innovation and practice platform which consists of "Synthetically Teaching Laboratory + Innovation Practice Base + Scientific Research Laboratory + Major Practice Base + Joint Teaching and Training Base", and meanwhile build a whole-process progressive training mode to foster optoelectronic students' innovative practical ability, following the process of "basic experimental skills training - professional experimental skills training - system design - innovative practice - scientific research project training - expanded training - graduation project": (1) To create an in - class practical ability cultivation environment that has distinctive characteristics of the major, with the teaching laboratory as the basic platform; (2) To create an extra-curricular innovation practice activities cultivation environment that is closely linked to the practical application, with the innovation practice base as a platform for improvement; (3) To create an innovation practice training cultivation environment that leads the development of cutting-edge, with the scientific

  7. Innovative process routes for a high-quality concrete recycling.

    Science.gov (United States)

    Menard, Y; Bru, K; Touze, S; Lemoign, A; Poirier, J E; Ruffie, G; Bonnaudin, F; Von Der Weid, F

    2013-06-01

    This study presents alternative methods for the processing of concrete waste. The mechanical stresses needed for the embrittlement of the mortar matrix and further selective crushing of concrete were generated by either electric impulses or microwaves heating. Tests were carried out on lab-made concrete samples representative of concrete waste from concrete mixer trucks and on concrete waste collected on a French demolition site. The results obtained so far show that both techniques can be used to weaken concrete samples and to enhance aggregate selective liberation (that is the production of cement paste-free aggregates) during crushing and grinding. Electric pulses treatment seems to appear more efficient, more robust and less energy consuming (1-3 kWh t(-1)) than microwave treatment (10-40 kWh t(-1)) but it can only be applied on samples in water leading to a major drawback for recycling aggregates or cement paste in the cement production process. Copyright © 2013 Elsevier Ltd. All rights reserved.

  8. Formulation of basic principles for innovative combustion and work processes; Projekt Erarbeitung von Grundlagen fuer innovative Brennverfahren und motorische Arbeitsprozesse

    Energy Technology Data Exchange (ETDEWEB)

    Barroso, G.; Escher, A.; Boulouchos, K. [Eidgenoessische Technische Hochschule (ETH), Labor fuer Aerothermochemie und Verbrennungssysteme IET, ETH-Zentrum, Zuerich (Switzerland)

    2004-07-01

    This yearly report for 2004 presents a review of work being done on behalf of the Swiss Federal Office of Energy (SFOE) at the Laboratory for Aero-thermochemistry and Combustion Systems at the Federal Institute of Technology ETH in Zurich, Switzerland, on the development of basic principles for innovative combustion and work processes. A successfully-used approach involving reaction-path analysis, heat-release analysis and the optimisation of bio-inspired algorithms is discussed. Experimental investigations made using the high-pressure, high-temperature cell at the ETH are described and initial results are discussed. The commissioning of a one-stroke Rapid Compression Machine EHT and the results of initial experiments are presented.

  9. Advisory Functions of Selected Polish Business Institutions in the Innovation Process in Enterprises – Research Conclusions

    Directory of Open Access Journals (Sweden)

    Joanna KUROWSKA-PYSZ

    2014-03-01

    Full Text Available This paper contains an analysis of innovation processes in enterprises, from the perspective of demand for knowledge, which companies increasingly obtain from business environment. This requires a discernment of valuable partners in the environment, who will provide professional transfer of knowledge to the company. Therefore, knowledge has become a product, and Polish universities and specialized, commercial knowledge providers are competing for the customer on the knowledge market. While knowledge transfer to companies is a secondary activity for Polish universities, specialized, commercial knowledge suppliers are making an effort of acquiring as much orders as possible. Therefore a natural competition between these two types of entities arises. In this paper the Author examines possibilities of supporting innovation-oriented enterprises by Polish universities and commercial providers of knowledge and formulates terms and conditions which will make cooperation between these two groups of entities possible, so as to transform the competition into cooperation, beneficial for both sides, and support innovative processes in enterprises.

  10. Psycho-social processes in dealing with legal innovation in the community: insights from biodiversity conservation.

    Science.gov (United States)

    Castro, Paula; Mouro, Carla

    2011-06-01

    Mitigation measures for tackling the consequences of a changing climate will involve efforts of various types including the conservation of affected ecosystems. For this, communities throughout the world will be called on to change habits of land and water use. Many of these changes will emerge from the multilevel governance tools now commonly used for environmental protection. In this article, some tenets of a social psychology of legal innovation are proposed for approaching the psycho-social processes involved in how individuals, groups and communities respond to multilevel governance. Next, how this approach can improve our understanding of community-based conservation driven by legal innovation is highlighted. For this, the macro and micro level processes involved in the implementation of the European Natura 2000 Network of Protected Sites are examined. Finally, some insights gained from this example of multilevel governance through legal innovation will be enumerated as a contribution for future policy making aimed at dealing with climate change consequences.

  11. Measurement of Design Process Front-End – Radical Innovation Approach

    DEFF Research Database (Denmark)

    Berg, Pekka; Pihlajamaa, Jussi; Hansen, Poul H. Kyvsgård

    2014-01-01

    The overall structure and the main characteristics of the future product are all decided in the front-end phase, which then strongly affects subsequent new product development activities. Recent studies indicate that these early front-end activities represent the most troublesome phase...... of the innovation process, and at the same time one of the greatest opportunities to improve the overall innovation capability of a company. In this paper dealing with the criteria we concentrate only for the objectives viewpoint and leave the attributes discussion to the future research. Two most crucial questions...... the innovation activities front end contains five assessment viewpoints as follows; input, process, output (including impacts), social environment and structural environment. Based on the results from our first managerial implications in three Finnish manufacturing companies we argue, that the developed model...

  12. [Innovation in healthcare processes and patient safety using clinical simulation].

    Science.gov (United States)

    Rojo, E; Maestre, J M; Díaz-Mendi, A R; Ansorena, L; Del Moral, I

    2016-01-01

    Many excellent ideas are never implemented or generalised by healthcare organisations. There are two related paradigms: thinking that individuals primarily change through accumulating knowledge, and believing that the dissemination of that knowledge within the organisation is the key element to facilitate change. As an alternative, a description and evaluation of a simulation-based inter-professional team training program conducted in a Regional Health Service to promote and facilitate change is presented. The Department of Continuing Education completed the needs assessment using the proposals presented by clinical units and management. Skills and behaviors that could be learned using simulation were selected, and all personnel from the units participating were included. Experiential learning principles based on clinical simulation and debriefing, were used for the instructional design. The Kirkpatrick model was used to evaluate the program. Objectives included: a) decision-making and teamwork skills training in high prevalence diseases with a high rate of preventable complications; b) care processes reorganisation to improve efficiency, while maintaining patient safety; and, c) implementation of new complex techniques with a long learning curve, and high preventable complications rate. Thirty clinical units organised 39 training programs in the 3 public hospitals, and primary care of the Regional Health Service during 2013-2014. Over 1,559 healthcare professionals participated, including nursing assistants, nurses and physicians. Simulation in healthcare to train inter-professional teams can promote and facilitate change in patient care, and organisational re-engineering. Copyright © 2016 SECA. Publicado por Elsevier España, S.L.U. All rights reserved.

  13. Prospects of competitive process innovation business in Brazil: critical factors for competitiveness, productivity and growth

    Directory of Open Access Journals (Sweden)

    Kátia Keiko Kitaguti

    2017-09-01

    Full Text Available The economic conditions of recent times require a structural changing and, mainly, behavioral ones of Brazilian business. The scenario created by big economic powers shows the difference between Brazilian industries and service sectors when it is compared business issues, for example, competitiveness, productivity and innovation, with others countries. The technological innovation consists in a critical factor for competitiveness and for the global economic development; moreover, it can be found in industrial sectors (responsible for materialization and organization of operational system of production process and in service sectors (which make planning of the contracted activity. Innovation should not be included only in these two economic sectors; however, it has to be included in the economic thought of countries. It has to be highlighted the fact that innovation is not the unique factor of competitiveness, but, productivity and knowledge make the same impact in competitiveness as innovation does. Besides, external and internal demands predict trends in terms of searching products, process an strategies, which can promote a better interaction between market and productivity control. In a global context, Brazil, specially, has a lot of techniques to learn in terms of how to use its resources in a adequate way, independently if they are natural or not. That is why studies about critical factors for competitiveness are determined for the Brazil's sustainable growth.

  14. Where innovation processes make a difference in products' short- and long-term market success

    NARCIS (Netherlands)

    Enzing, C.; Batterink, M.H.; Janszen, F.H.A.; Omta, S.W.F.

    2011-01-01

    Purpose – This paper seeks to investigate with reference to which factors the innovation processes of new and improved products differ and how these factors relate to the products' success on the market, with a specific focus on technology- and market-related factors. Design/methodology approach –

  15. The INNOHYP-CA Project: producing Hydrogen by innovative high-temperature processes

    International Nuclear Information System (INIS)

    Giaconia, A.; Giorgiantoni, G.; Liberatore, R.; Tarquini, P.; Vignolini, M.

    2008-01-01

    The Project, financed under the 6. Framework Programme, has selected a member of innovative high-temperature processes that seem promising for large-scale production of Hydrogen. ENEA has contributed to the analysis of the status of national and regional projects in the European countries and to the definition of guidelines for the future development of these technologies [it

  16. The role of networks in business model innovation : three shaping processes supporting cognitive shifts

    NARCIS (Netherlands)

    Oskam, Inge; de Man, Ard-Pieter; Bossink, Bart

    2017-01-01

    Stakeholders and in particular customers are an important source for business model innovation. Especially for sustainable business models, stakeholder integration may radically change the business logic and help to revise the business model. In this process cognition plays a central role,

  17. Implementing Pollution Source Control—Learning from the Innovation Process in English and Welsh Water Companies

    NARCIS (Netherlands)

    Spiller, M.; McIntosh, B.S.; Seaton, R.A.F.; Jeffrey, P.

    2013-01-01

    Improving the stimulation and management of innovation by water utilities is a key mechanism through which the challenges of securing sustainable water and wastewater services will be achieved. This paper describes the process of adopting source control interventions (SCIs) by water and sewerage

  18. An innovative approach to solid Low Level Radioactive Waste processing and disposal

    International Nuclear Information System (INIS)

    Pancake, D.C. Jr.; Sodaro, M.A.

    1994-01-01

    This paper will focus on a new system of Low Level Radioactive Waste (LLW) accumulation, processing and packaging, as-well as the implementation of a Laboratory-wide training program used to introduce new waste accumulation containers to all of the on-site radioactive waste generators, and to train them on the requirements of this innovative waste characterization and documentation program

  19. The Process of Innovation in Education. The Educational Technology Reviews Series. Number Two.

    Science.gov (United States)

    Educational Technology Publications, Englewood Cliffs, NJ.

    Composed of articles published in recent issues of "Educational Technology" magazine, this volume focuses on the process of innovation in education. Included are articles on needs and criteria for change, accountability, modes for adaptation, educational management, teacher roles and attitudes, educational planning, and strategies of…

  20. [Development and innovation of traditional Chinese medicine processing discipline and Chinese herbal pieces industry].

    Science.gov (United States)

    Xiao, Yong-Qing; Li, Li; Liu, Ying; Ma, Yin-Lian; Yu, Ding-Rong

    2016-01-01

    To elucidate the key issues in the development and innovation of traditional Chinese medicine processing discipline and Chinese herbal pieces industry Chinese herbal pieces industry. According to the author's accumulated experience over years and demand of the development of the Chinese herbal pieces industry, the key issues in the development and innovation on the Chinese herbal pieces industry were summarized. According to the author, the traditional Chinese medicine processing discipline shall focus on a application basis research. The development of this discipline should be closely related to the development of Chinese herbal pieces. The traditional Chinese medicine processing discipline can be improved and its results can be transformed only if this discipline were correlated with the Chinese herbal pieces industry, matched with the development of the Chinese herbal pieces industry, and solved the problems in the development on the Chinese herbal pieces industry. The development of traditional Chinese medicine processing discipline and the Chinese herbal pieces industry also requires scientific researchers to make constant innovations, realize the specialty of the researches, and innovate based on inheritance. Copyright© by the Chinese Pharmaceutical Association.

  1. Coaching Teamwork in the Classroom Using an Innovative Team-Coaching Process.

    Science.gov (United States)

    Petty, Gayle M; Lingham, Tony

    2018-04-19

    The importance of health professionals working in teams was first acknowledged by the Institute of Medicine more than 15 years ago. Since then, teaching students to function in teams continues to present challenges in nursing education. This article presents an innovative process, using faculty as coaches in the classroom, to enhance student learning through experiential teamwork.

  2. An innovative process for treatment of municipal wastewater with superior charcteristics compared to traditional techologies

    DEFF Research Database (Denmark)

    Schmidt, Jens Ejbye; Fitsios, E.; Angelidaki, Irini

    2002-01-01

    An innovative treatment process for municipal sewage, which results in low sludge production, low energy consumption, high COD removal and high energy and nutrients recovery, is described. The organic matter will primarly be removed through anaerobic degradation using high-flow reactors. For nitr...

  3. Innovation in the district heating. Process study in February 2012; Innovasjon i fjernvarme. Prossesstudie februar 201

    Energy Technology Data Exchange (ETDEWEB)

    Hoey, Mads Bruun

    2012-07-01

    This process study shows that, in order to create more innovation for growth in the district heating sector, it requires a new initiative, carried out by the district heating companies themselves, in the areas described in the study. This is regarded as the opportunities that the program should look for and will be more complete by the descriptions of the workshop results. (eb)

  4. School Processes That Can Drive Scaling-Up of an Innovation or Contribute to Its Abandonment

    Science.gov (United States)

    Newman, Denis; Zacamy, Jenna; Lazarev, Valeriy; Lin, Li

    2017-01-01

    This five-year study focused on school processes that promoted the scaling-up of a high school academic literacy framework, Reading Apprenticeship, developed by WestEd's Strategic Literacy Initiative (SLI). Implementing an innovative strategy for scaling-up involving school-based cross-disciplinary teacher teams, SLI brought the framework to 274…

  5. Fast covariance estimation for innovations computed from a spatial Gibbs point process

    DEFF Research Database (Denmark)

    Coeurjolly, Jean-Francois; Rubak, Ege

    In this paper, we derive an exact formula for the covariance of two innovations computed from a spatial Gibbs point process and suggest a fast method for estimating this covariance. We show how this methodology can be used to estimate the asymptotic covariance matrix of the maximum pseudo...

  6. Localised automation and robotics solutions, using a lean and agile R&D innovation process

    CSIR Research Space (South Africa)

    Bosscha, P

    2015-10-01

    Full Text Available too often, we develop excellent strategies, but fail on the implementation of these strategies. This paper will focus on the lean and agile research and development methodology and innovation process developed at the CSIR. It will use market areas...

  7. How Innovation Theory Can Contribute to the Military Operations Planning Process

    DEFF Research Database (Denmark)

    Heltberg, Anna Therese; Dahl, Kåre

    The research study considers how the application of innovation theory might contribute to military staff work planning processes and bring new perspectives to operational models of analysis such as NATO’s Comprehensive Operations Planning Directive (COPD) and the Danish Field Manual III....

  8. Multi-Stakeholder Process Strengthens Agricultural Innovations and Sustainable Livelihoods of Farmers in Southern Nigeria

    Science.gov (United States)

    Bisseleua, D. H. B.; Idrissou, L.; Olurotimi, P.; Ogunniyi, A.; Mignouna, D.; Bamire, S. A.

    2018-01-01

    Purpose: In this paper, we explore the strategic role of Multi-stakeholder processes (MSP) in agricultural innovations and how it has impacted livelihood assets' (LAs) capital dynamics of stakeholders in platforms in West Africa. Design/Methodology/Approach: We demonstrate how LA capitals and socio-economic dynamics induced by MSP can enhance…

  9. Managing innovation processes through value co-creation: a process case from business-to-business service practise

    DEFF Research Database (Denmark)

    Nardelli, Giulia; Broumels, Marcel

    2018-01-01

    Value co-creation is a specific type of collaboration that is considered to be an innovative and interactive process between end users and organisations; it aims to increase the value of a product or service. This study investigates how a network of stakeholders collaborating to manage innovation...... openly co-creates value over time; it contributes to the existing literature on value co-creation by taking the perspective of the network as a whole. The study follows a case in which value co-creation unfolds over time across a network of stakeholders within the business-to-business facility service...... context. The in-depth longitudinal investigation of a network composed of a corporate customer and its external facility service providers revealed that a network of stakeholders co-creates value over time by 1) offering an adaptable structure for the network to organise innovation activities...

  10. “Extremely stimulating and exciting”: The influence of the designer as enthusiast on innovation processes

    DEFF Research Database (Denmark)

    Minder, Bettina; Lassen, Astrid Heidemann

    2017-01-01

    Design thinking has been widely applied as interdisciplinary innovation approach. Simultaneously inclusion of external designers for collaborative learning cycles across different departments have significantly gained importance. However in the context of these debates around design as approach...... and designers as external support, research has paid little attention as to what really happens when designers meet non-designers in innovation processes. We clarify and extend on this literature through drawing on the concept of enthusiasm. We use this concept as foil to analyse collaboration between non...

  11. EDUCATIVE INNOVATION PROCESS IN UNIVERSITY FORMATION, NEW PRODUCTIVE BESTS PRACTICES IN EDUCATIVE TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Bartolomé Rubia-Avi

    2010-02-01

    Full Text Available The influence of educational innovation in the transformation of Spanish Universities to achieved the goals posed by the European Higher Education Area is a crucial aspect for this reform. This process of deep impact within the European countries is promoting the revision of traditional teaching methods. Small groups of teachers and communities of practice are leading this revision by reflecting upon the main issues affecting the higher education system at the same time that they propose horizontal innovations to overcome them. Information and Communication Technologies are becoming of special relevance with regard to the aforementioned innovations. This paper describes a experience conducted within the GSIC-EMIC research team that illustrates the efforts done by a community of teachers at the University of Valladolid (Spain to analyze and improve their own teaching practices.

  12. The Methodology of the Process of Formation of Innovation Management of Enterprises’ Development

    Directory of Open Access Journals (Sweden)

    Prokhorova Viktoriia V.

    2017-12-01

    Full Text Available The article is aimed at forming the methodology of process of innovation management of enterprises’ development in modern conditions. A study on formation of the essence of methodology was carried out, the stages of development of methods and means of scientific cognition were analyzed. The basic components of formation of methodology of innovation management of development of enterprises have been defined, i.e.: methods, types, principles, components, systematized aggregate. The relations of empirical and theoretical methods of scientific cognition were considered and defined. It has been determined that the increase of the volume and scope of scientific views, as well as the deepening of scientific knowledge in the disclosure of laws and regularities of functioning of real natural and social world, lead to the objective fact that is the desire of scientists to analyze methods and means by which modern innovative knowledge and views in the enterprise management system can be acquired and formed.

  13. Life Cycle Assessment of Process Eco-Innovations in an SME Automotive Supply Network

    Directory of Open Access Journals (Sweden)

    Alberto Simboli

    2015-10-01

    Full Text Available The aim of the study presented in this article is to assess, from an environmental standpoint, a set of eco-innovations applied to the production process of an automotive component. The eco-innovations were developed by a supply network of small- and medium-sized enterprises (SMEs in the framework of a project named “Hi-reach”. The component considered is a motorcycle rear wheel spindle. The conventional version is obtained by machining a single forged steel part. The Hi-reach version is indeed manufactured by joining a shaft to a flange; in addition, conventional surface treatments are replaced by a plasma-enhanced chemical vapour deposition (PECVD treatment and other machining steps are improved. This process was conceived with the aim of maintaining (or enhancing the technical performance of the spindle and reducing production costs. A Life Cycle Assessment (LCA was carried out to compare the two scenarios described. Those eco-innovations resulted in significant improvements of the environmental performance of the analysed component, ranging, on average, between 50% and 70% for the impact indicators considered. Our results also highlight the role of SMEs in promoting process eco-innovations and the increasing relevance of LCA as a tool to support decision making in manufacturing.

  14. Analyze of Predictive Model of Innovation Management in Processing and Complementary Industries of Livestock Products

    OpenAIRE

    Ahmad Reza Ommani

    2015-01-01

    The purpose of this study was designing predictive model for innovation management in processing and complementary industries of livestock products. The method of research was correlative descriptive. The population of this research was managers in processing and complementary industries of livestock products of Khouzestan Province (N=486). By stratified random sampling, a random sample (n=125) was selected for participation in the study. A questionnaire was developed to ...

  15. Organizing the Financial and Economic Security of Business Processes of Innovation Development of Enterprise

    OpenAIRE

    Otenko Iryna P.; Komarkov Dmytriy V.; Shkreben Roman P.

    2017-01-01

    The article is aimed at analyzing ways and means of organizing the financial and economic security of business processes of innovation development of enterprise. The business processes of enterprise, which act as objects of managerial decision-making, are considered. It has been determined that the time for decision-making by directors is ensured as result not only of reactive but also proactive management, that is, one that involves modeling the problematic situations, related to business pr...

  16. Influences of Government Championship on the Technology Innovation Process at the Project-level

    Science.gov (United States)

    Yue, Xin

    Government support is a popular instrument to foster technology innovation. It can take various forms such as financial aid, tax credits, and technological assistance. Along with the firm characteristics, strategic behavior of the project team, characteristics of the technology and the market, and the regulatory environment, government support influences firms' research and development (R&D) motivations, decision making process, and hence technology development performance. How government support influences the performance in different industries is an important policy and research question. There are many studies on the effectiveness and impacts of government support, mostly at program-level or industry-level. Government Championship is a form of government support distinct from direct financial or technological assistance. Championship includes expressing confidence in the innovation, encouraging others to support the innovation, and persisting under adversity. Championship has been studied as a critical inside factor for innovation success, particularly at project-level. Usually a champion emerged within the organization responsible for the innovation project. However, with the intention to encourage technology development, governments can also play a championship role. Government championship, besides government financial and technological assistance (hereafter "government F&T"), could be one major category of government support to facilitate high-technology innovation. However, there are few studies focusing on the effectiveness of government championship, and how it influences the innovation process. This thesis addresses this question through two studies on high-technology development projects. The first study has tested the effectiveness of government championship on the performance of 431 government sponsored technology innovation projects. Government championship and government F&T, as well as project team strategic behavior, are hypothesized to influence

  17. Science, technology and environmental demands: innovations in oil refining process; Ciencia, tecnologia e demandas ambientais: inovacoes nos processos de refino

    Energy Technology Data Exchange (ETDEWEB)

    Azevedo, Adalberto Mantovani Martiniano de [Universidade Estadual de Campinas, SP (Brazil). Inst. de Geociencias. Programa de Pos-graduacao do Departamento de Politica Cientifica e Tecnologica

    2003-07-01

    This paper consists in a survey about changes in oil refining technologies caused by an increase of external environmental restrictions, that create demands for innovations related to the reduction of environmental impacts in refining processes and products. The environmental restrictions considered in this paper include state regulation, like the control over solid and gas wastes and the control over levels of air pollutants on refined products. Another group of restrictions include market restrictions, mainly the restrictions for obtaining 'green' quality labels, like ISO 14000. The paper will show the main environmental restrictions for the Paulinia Refinery (REPLAN), and its reaction in introducing innovations in refining processes. Some aspects of the innovations observed will be described, like the kind of innovation (process or product), the institutions that created innovations and their resources, the knowledge fields applied, and another characteristics for the evaluation of environmental influence over the development on oil refining innovations. (author)

  18. Results of innovative communication processes on productivity gains in a high technology environment

    Science.gov (United States)

    Kelly, B. J.

    1985-01-01

    The technology which resulted in performance breakthroughs at engineering and management services is discussed. As a result of the innovative approaches of communicating productivity concepts to the employees, specific outcomes can now be pinpointed at all levels of the organization such as: (1) employee-headed program; (2) performance feedback processes; and (3) an investigative approach to creating leadership. The Lockheed Corporation began the innovative trend in 1974 when they became the first company to introduce quality circles in America. Although some of Lockheed-EMSCO's processes may sound different from traditional improvement processes, the context out of which those to be presented evolved has sustained more than 10 years of positive results through employee involvement activities.

  19. Entrepreneurial Interest in Product Innovation-based Organic Processed Food in SMEs in Malang, Indonesia

    OpenAIRE

    Sri Muljaningsih

    2015-01-01

    The underlying reason for conducting the study is need for organic processed food. Producing innovative organic processed food is not an easy task since it requires creativity. The statement of the problem is how to create entrepreneurial interest to produce organic processed food. The study is a qualitative study of which purpose is to describe organic processed food SMEs behavior. There are 7 (seven) informants involved in the study. The setting of the study is SMEs in “Lily go to organic G...

  20. Spatial knowledge dynamics of innovation processes: local and non-local aspects of buzz and collective learning

    DEFF Research Database (Denmark)

    Tanner, Anne Nygaard

    2014-01-01

    learning processes and require face-to-face contact. In sum, the innovation biography method contributes in uncovering innovation processes and how these rely on many different configurations of spatial knowledge dynamics, including buzz, local ties and global pipelines. The findings imply that policy...

  1. Use of the innovation-decision process teaching strategy to promote evidence-based practice.

    Science.gov (United States)

    Schmidt, Nola A; Brown, Janet M

    2007-01-01

    The purpose of this article is to describe the innovation-decision process teaching strategy (I-DPTS) based on the model of diffusion of innovations [Rogers, E. M. (2003). Diffusion of innovations (5th ed.). New York: Free Press]. A goal of baccalaureate nursing education is to develop competencies required for evidence-based practice. Such practice merges clinician expertise, patient preferences, and critical evaluation of the literature to improve patient outcomes and reduce health care costs [Melnyk, B. M. (2005). A primer on evidence-based practice. Paper presented at the Purdue School of Nursing Seventh Annual Helen R. Johnson Leadership Conference, West Lafayette, IN]. Several strategies to promote evidence-based practice have appeared in the literature. However, when they are examined in light of the innovation-decision process (Rogers, 2003), they do not address all the essential steps for adoption to occur. The I-DPTS allows students to achieve competencies necessary to overcome barriers associated with implementing best practices. This strategy was successfully implemented in a senior-level introductory nursing research class. Community representatives identified practice issues that could be addressed by student groups. After conducting a search of the literature, students analyzed the evidence, determined best practice based on the evidence, and developed a policy for implementation in clinical settings. At course end, representatives were invited to attend oral and poster presentations. Use of the I-DPTS better prepares students to implement best practice as they embark on their professional careers.

  2. Learning while (re)configuring: Business model innovation processes in established firms

    Science.gov (United States)

    Berends, Hans; Smits, Armand; Reymen, Isabelle; Podoynitsyna, Ksenia

    2016-01-01

    This study addresses the question of how established organizations develop new business models over time, using a process research approach to trace how four business model innovation trajectories unfold. With organizational learning as analytical lens, we discern two process patterns: “drifting” starts with an emphasis on experiential learning and shifts later to cognitive search; “leaping,” in contrast, starts with an emphasis on cognitive search and shifts later to experiential learning. Both drifting and leaping can result in radical business model innovations, while their occurrence depends on whether a new business model takes off from an existing model and when it goes into operation. We discuss the implications of these findings for theory on business models and organizational learning. PMID:28596704

  3. Innovative technologies on fuel assemblies cleaning for sodium fast reactors: First considerations on cleaning process

    International Nuclear Information System (INIS)

    Simon, N.; Lorcet, H.; Beauchamp, F.; Guigues, E.; Lovera, P.; Fleche, J. L.; Lacroix, M.; Carra, O.; Dechelette, F.; Prele, G.; Rodriguez, G.

    2012-01-01

    Within the framework of Sodium Fast Reactor development, innovative fuel assembly cleaning operations are investigated to meet the GEN IV goals of safety and of process development. One of the challenges is to mitigate the Sodium Water Reaction currently used in these processes. The potential applications of aqueous solutions of mineral salts (including the possibility of using redox chemical reactions) to mitigate the Sodium Water Reaction are considered in a first part and a new experimental bench, dedicated to this study, is described. Anhydrous alternative options based on Na/CO 2 interaction are also presented. Then, in a second part, a functional study conducted on the cleaning pit is proposed. Based on experimental feedback, some calculations are carried out to estimate the sodium inventory on the fuel elements, and physical methods like hot inert gas sweeping to reduce this inventory are also presented. Finally, the implementation of these innovative solutions in cleaning pits is studied in regard to the expected performances. (authors)

  4. Learning while (re)configuring: Business model innovation processes in established firms.

    Science.gov (United States)

    Berends, Hans; Smits, Armand; Reymen, Isabelle; Podoynitsyna, Ksenia

    2016-08-01

    This study addresses the question of how established organizations develop new business models over time, using a process research approach to trace how four business model innovation trajectories unfold. With organizational learning as analytical lens, we discern two process patterns: "drifting" starts with an emphasis on experiential learning and shifts later to cognitive search; "leaping," in contrast, starts with an emphasis on cognitive search and shifts later to experiential learning. Both drifting and leaping can result in radical business model innovations, while their occurrence depends on whether a new business model takes off from an existing model and when it goes into operation. We discuss the implications of these findings for theory on business models and organizational learning.

  5. Transcending Organizational Boundaries:Exploring intra- and inter-organizational processes of business model innovation in a port authority

    OpenAIRE

    Kringelum, Louise Tina Brøns

    2017-01-01

    This thesis explores how processes of business model innovation can unfoldin a port authority by transcending organizational boundaries throughinter-organizational collaboration. The findings contribute to two fields ofacademic inquiry: the study of business model innovation and the study ofhow the roles of port authorities evolve. This contribution is made by combiningthe two fields, where the study of business model innovation is usedas an analytical concept for understanding the evolution ...

  6. IMITATION STRATEGIES FOR SME’S LEARNING PROCESS TOWARDS INNOVATION STRATEGIES

    Directory of Open Access Journals (Sweden)

    Rina Sulistiyani

    2013-01-01

    The research results are as follow: the learning experience to use imitation strategy which covers stages of imitation, research, development and  creation. This learning process is the result of interaction between personal and behavior factors, as well as the enabler and barriers. The owners of leather small industries which leave the imitation strategy and switch to innovation strategy are craftsmen who have an entrepreneurial spirit. they are able to balance entrepreneurial and business aspects.

  7. Food Processing Innovation: A Case Study with Pressurized Passion Fruit Juice

    OpenAIRE

    Lúcia Helena Laboissière; Rosires Deliza; Aline Mota Barros-Marcellini; Amauri Rosenthal; Lourdes Maria Camargo; Roberto Junqueira

    2007-01-01

    Tropical fruit juice production shows an annual increase in volume of 15 to 20% in Brazil. Growing demand for processed fruit pulp arouses juice industry interest to search for novel technologies. High Hydrostatic Pressure (HHP) is an innovative technology which allows juice production with improved sensory characteristics compared to pasteurization, meeting consumer demands for fresh-like foods. Despite recognized advantages of pressurized products described in the literature, a positive con...

  8. The Analysis of Product Traits and Innovation Process of Multi Level Marketing Business at Talk Fusion

    OpenAIRE

    Suwarno, Sutrisno

    2013-01-01

    Multi Level Marketing Business nowadays is rapidly growing. In recent years, there have been so many new Multi Level Marketing Business coming out with their own specific offers and products. One of the advantages of MLM Business is the contribution it makes to economic growth. It makes it possible for the national income to continuously grow. The objectives can be achieved from this research are to examine product traits and innovation process of Talk Fusion. Theories supporting research are...

  9. Investigation of innovative thermochemical energy storage processes and materials for building applications

    OpenAIRE

    Aydin, Devrim

    2016-01-01

    In this study, it is aimed to develop an innovative thermochemical energy storage system through material, reactor and process based investigations for building space heating applications. The developed system could be integrated with solar thermal collectors, photovoltaic panels or heat pumps to store any excess energy in the form of heat for later use. Thereby, it is proposed to address the problem of high operational costs and CO2 emissions released by currently used fossil fuel based heat...

  10. Refining the learning process in Newfoundland : E-learning innovation at North Atlantic

    Energy Technology Data Exchange (ETDEWEB)

    Murray, D.

    2001-11-01

    The Learning Technologies in the Workplace Awards were launched by the Conference Board of Canada in April 2001 with funding from Human Resources Development Canada's Office of Learning Technologies. This paper described the innovative and outstanding efforts made by the winner, North Atlantic. The North Atlantic refinery is located on an inlet on the Avalon Peninsula approximately 135 kilometres west of St. John's, Newfoundland. Each day, 105,000 barrels of oil are processed for export to 25 countries. In 1998, the company recognized that better training was required in the areas of improved safety, performance, and employee innovation and capacity. The isolation faced by the employees was a key driver behind the decision to implement the TRAQS training program in 1999 for e-learning developed by Illuminatus. This on-line training program also features testing through CHALLENGE, a software package compatible with TRAQS learning management system. Process emergency simulation exercises were developed by North Atlantic which are now being used externally. Job-specific technical information is delivered through the local area network (LAN). The keys to success were identified as being: innovative organizational culture; vision and action; executive management support, commitment to learning and employee development; positive work life balance; union cooperation; technology intensive workplace; linking learning with work process and performance management; and, tracking and certification.

  11. DEMONSTRATION OF THE STRATEGY FORMATION PROCESS: A CASE STUDY IN A INNOVATIVE ORGANIZATION

    Directory of Open Access Journals (Sweden)

    Daniel Teodoro Gomes

    2012-05-01

    Full Text Available This paper presents a study of strategy formation process with the following starting question: "How the strategy is shaped in an innovative company and how the factors manifesting in the process?". The research builds on a case study of a company considered innovative leader in its industry and a pioneer in providing various services in the area of mobile phone in Brazil. Data collection was through interviews semi-structured with directors and managers involved in strategy formation, supplemented by documents and direct observation. Data analysis is based on the techniques of discourse analysis, from the persuasion strategies suggested by Linhares and Faria (1993. The company's strategy studied can be defined as an entrepreneurial vision, focused on growth supported by a process of diversification of product lines from a new direction composed of three elements: (i componentization; (ii segmentation by products chain and; (iii external to finance leverage in order to resumption of innovative projects. It was concluded that the company's strategy focused on these three factors, supported by a deliberate vision of the future, conditions its historical trajectory type standard cultural, its core values, which acts as a motivator and guide for members of the organization decisions and actions.

  12. Academic research – a catalyst for the innovation process within companies in Romania

    Directory of Open Access Journals (Sweden)

    Rodica Pamfilie

    2014-08-01

    Full Text Available Current economic developments make the use of scientific resources, especially academic research, to be no longer just an option for companies wanting to remain competitive, but a necessity. This statement is based on the research conducted by the authors during the last three years on the companies` performance in Romania regarding the results of the innovation process and capitalization on scientific resources in order to improve this vital process. To achieve this, a mechanism should be created, through which key players in the market - companies, universities, research institutes and government - could work together towards the common goal of economic growth. This mechanism would help companies move beyond incremental innovation by using knowledge generated by universities or research institutes. This can be achieved with the support of the governmental environment, by adopting policies and creating a general favourable climate for research and by fostering its integration among companies. This paper presents an analysis of the degree to which companies in Romania use the results of academic research when developing new products or services. Among the identified issues we include the Romanian companies’ tendency to perform individual research and development projects, though their frequency is quite low given the difficulties in successfully delivering them to the market. The research shows the importance of using academic research when moving beyond incremental improvements and developing the innovation processes within the company. The prospect of a future model of the university as a knowledge and innovation hub of can significantly contribute to the capitalization of academic research by companies in order to develop sustainable businesses.

  13. Innovative biological systems for anaerobic treatment of grain and food processing wastewaters

    Energy Technology Data Exchange (ETDEWEB)

    Sutton, P M

    1986-09-01

    The application of two innovative fixed film and suspended growth anaerobic biological systems to the treatment of grain and food processing wastewaters is discussed. A fluidized bed fixed film system and a suspended growth membrane system are described. The technical and economic factors dictating which system is selected for treatment of a specific industrial wastewater are discussed. Case history results from successful operation of full-scale, demonstration, and pilot-scale systems treating respectively, soy whey, cheese whey, and wheat flour processing wastewaters are presented.

  14. Innovative reactive distillation process for the production of the MTBE substitute isooctane from isobutene

    Energy Technology Data Exchange (ETDEWEB)

    Chalakova, M. [Magdeburg Univ. (Germany). Process Systems Engineering; Kaur, R.; Mahajani, S. [Indian Inst. of Technology, Mumbai (India); Freund, H. [Max-Planck-Institute for Dynamics of Complex Technical Systems, Magdeburg (Germany); Sundmacher, K. [Magdeburg Univ. (Germany). Process Systems Engineering]|[Max-Planck-Institute for Dynamics of Complex Technical Systems, Magdeburg (Germany)

    2007-07-01

    Isooctane is a promising candidate to replace MTBE as gasoline additive if it can be produced in economically and environmentally efficient processes. A promising reaction way at mild conditions is the so called indirect alkylation of isobutene (IB). In the present work two innovative reactive distillation (RD) concepts where the reactions are carried out either simultaneously (fully integrated) or sequentially (partially integrated) are designed. Suitable operation conditions are identified and a comparison with the conventional process scheme under performance and economic aspects is carried out. (orig.)

  15. A call for the need to incorporate enterprise risk management as part of the overall business model innovation process

    DEFF Research Database (Denmark)

    Taran, Yariv; Boer, Harry; Lindgren, Peter

    2009-01-01

    Relative to, for example, radical product innovation process, little isknown about business model innovation, let alone the process of managingthe risks involved in that process. Using the emerging Enterprise RiskManagement (ERM) literature, an approach is proposed through whichrisk management can...... be embedded in the business model innovationprocess. The integrated risk management/business model innovationprocess model has been tested through an action research study in aDanish company. The results are promising and warrant continuation ofthe development of that model....

  16. The effect of innovation competence on the choice of information elements in a simulated NPD process

    DEFF Research Database (Denmark)

    Søndergaard, Helle Alsted; Juhl, Hans Jørn

    to prompt different managerial behaviour. This study uses a role-play approach to investigating the relationship between innovation competence (exploitation or exploration competences) and the acquisition of information elements in a simulated new product development (NPD) process. Results show that two......This paper presents a study of the relationship between innovation competence and managerial behaviour. Within the resource-based view of the firm the development of new products is often related to the attainment of dynamic capabilities. Different levels of dynamic capabilities are expected...... distinct clusters can be identified among respondents, one cluster with both exploitation and exploration competence experience and a second cluster only with exploitation competence experience. Contrary to expectations analysis of variance and Chi-square tests for independence show that there are no clear...

  17. Facilitating Teacher Students’ Innovation Competence through Problem-Based Game Design Processes

    DEFF Research Database (Denmark)

    Hanghøj, Thorkild; Hovmand Sørensen, Sia

    2013-01-01

    and the interplay of different knowledge domains “inside” and “outside” of teacher education. By taking a mixed methods approach, we combine qualitative and quantitative methodologies for studying our case. This involved observations and interviews with selected groups as well as a post-camp survey with all......The aim of this paper is to describe how new teacher students develop innovation competence through problem-based game design processes by participating in an intro camp. The intro camp was held for 350 new teacher students at a Danish university college in 2011, which were asked to solve the real......-life problems of local schools by designing game solutions to be presented for and assessed by participating school directors and pupils. Based upon a pragmatist theoretical framework, we conceptualize the students’ development of innovation competence in relation to creative problem-solving, game frames...

  18. INNOVATIVE TENDENCIES OF FUTURE MUSIC TEACHERS’ SINGING TRAINING IN THE PROCESS OF PROFESSIONAL TRAINING

    Directory of Open Access Journals (Sweden)

    Si Daofen

    2017-04-01

    Full Text Available In the article the innovative tendencies of singing training of Art institutes students at pedagogical universities is presented. The issue introduced in the article is relevant as processes of modernization of higher art and pedagogical education require implementing new scientific approaches and innovative technologies into future music teachers’ training to ensure the comprehensive development of a young generation in modern conditions. So the aim of the article is to disclose the main features of implementing innovative technologies into future music teachers’ training. The analysis of pedagogical and psychological literature shows that the main features of methodological training to work with schoolchildren are the following: mastering professional knowledge, taking into account characteristics of adults’ and children’s phonation; considering aesthetical and value qualities of vocal sound according to modern standards of singers’ training; comprehensive development of vocal, melodic and harmonic hearing; an ability to get schoolchildren’s correct vocal sound; developing skills of methodological analysis of singing process. Due to analysis of scientific works by V. Antoniuk, N. Hrebeniuk, V. Morozov it is reported that efficiency of students and singers’ performance depends on their readiness to make independent decisions in practical creative and performing process, that is a general tendency in the singing training. That’s why one of the main objectives of future music teacher training to performing activities during the years of study is thought to be developing singers’ independence. Among the most effective innovative technologies of future music teachers’ singing training the author proposes technologies of vocal and choral performance by V. Yemelianova, V. Morozova, H. Struve. It is proved that none of innovative concepts, discussed in the article, cannot be mechanically implemented in current national conditions

  19. CASE STUDY: THE IMPACT OF INNOVATION PROCESS ON TURNOVER OF GEO – TOPO COMPANY

    Directory of Open Access Journals (Sweden)

    Drienovski Kristina – Jana

    2014-07-01

    Full Text Available This paper presents a case study of the impact of innovation process on the turnover of the GEO - TOPO company in order to highlight the existence of less convenient situations where innovation costs are not included in income madeby the company. Thru this study the paperwork highlights the importance of company’s turnover despite the fact that this indicator is one that presents past performances. Most of the existing literature presents positive aspects of the innovation process, and for the future decisions recommends economic forecast. There are studies showing the risks of the innovation process, including the possibility of bankruptcy of the company due to the failure of the innovation process, but this work represents a practical reality, a point of arrival for the past research and a starting point for the future theories. Bibliographic documentation and research of the enterprises documents were the basis of confirmation for theories regarding the risks of innovation process and an anchor for issuing statements about the negative impact of innovation process on turnover. The results obtained in this study show the importance of turnover in future decisions of the enterprise in order to support an possible and immediate failure. This study has its limitation, because it refers to the result of a service provider SME that has introduced a process of organizational innovation. The results are accurate, this work is part of a broader research regarding the impact of innovation process on companies economic and financial performance. This research supports the entrepreneur in decisions making, comes as a backup plan to avoid bankruptcy, and proposes a closer connection between the marketing department and the accounting in an enterprise. In businesses that have outsourced accounting services, this study provides contractor necessary information for a correct decision without the need for a detailed explanation of the accounts and positions

  20. Imitation and Innovation in Fashion: Mapping the Creative Process in "Modinha" Segment on a Regional Fair

    Directory of Open Access Journals (Sweden)

    Thalita Silva Calíope

    2016-06-01

    Full Text Available Fashion is recognized by transience, resulting in its short life cycle, since the constant changes make what was previously considered "fashionable" obsolete (Emidio & Sabione, 2010. In this market, innovate and act before competitors, accelerate the launch of products, reduce design time and the placement of new items on the market is a survival condition (Lipovetsky, 2007. A central factor in the fashion spread is imitation, as this promotes both innovation and obsolescence, forcing producers to set up periodically (Caulkins et al., 2007, Pesendorfer, 1995. The research object is the "modinha", women's clothing that follows media trends, is the copying, with or without changes, to the mass market (Avelar, 2009; Victor, 2007, in this study, "José Avelino Street Fair". This fair meets weekly hundreds of manufacturers in a metropolis of northeastern Brazil that has been established as a fashion hub. Thus, it was proposed to identify the process of innovation in companies that make “modinha” in this Fair. The research was conducted through a survey and data were obtained from a questionnaire administered with 78 stallholders. One descriptive and exploratory data analysis was performed. It was found that, contrary to expectation, a considerable formality, with 49 of the 78 respondents with CNPJ; its customers are small retailers; and their competitors are the stallholders. Regarding the creation of clothes models, the stallholders research in various sources and said imitating models from these sources, but they try to make changes.

  1. Conventional and Innovative Processing of Milk for Yogurt Manufacture; Development of Texture and Flavor: A Review

    Directory of Open Access Journals (Sweden)

    Panagiotis Sfakianakis

    2014-03-01

    Full Text Available Milk and yogurt are important elements of the human diet, due to their high nutritional value and their appealing sensory properties. During milk processing (homogenization, pasteurization and further yogurt manufacture (fermentation physicochemical changes occur that affect the flavor and texture of these products while the development of standardized processes contributes to the development of desirable textural and flavor characteristics. The processes that take place during milk processing and yogurt manufacture with conventional industrial methods, as well as with innovative methods currently proposed (ultra-high pressure, ultrasound, microfluidization, pulsed electric fields, and their effect on the texture and flavor of the final conventional or probiotic/prebiotic products will be presented in this review.

  2. Conventional and Innovative Processing of Milk for Yogurt Manufacture; Development of Texture and Flavor: A Review

    Science.gov (United States)

    Sfakianakis, Panagiotis; Tzia, Constatnina

    2014-01-01

    Milk and yogurt are important elements of the human diet, due to their high nutritional value and their appealing sensory properties. During milk processing (homogenization, pasteurization) and further yogurt manufacture (fermentation) physicochemical changes occur that affect the flavor and texture of these products while the development of standardized processes contributes to the development of desirable textural and flavor characteristics. The processes that take place during milk processing and yogurt manufacture with conventional industrial methods, as well as with innovative methods currently proposed (ultra-high pressure, ultrasound, microfluidization, pulsed electric fields), and their effect on the texture and flavor of the final conventional or probiotic/prebiotic products will be presented in this review. PMID:28234312

  3. Political innovations

    DEFF Research Database (Denmark)

    Sørensen, Eva

    2017-01-01

    are mainly interested in assessing and promoting innovations in public service delivery, but have paid little or no attention to the need for innovations in polity, politics and policy. This article develops a research agenda for studying innovations in political institutions, in the political process...... and in policy outputs. It proposes a number of research themes related to political innovations that call for scholarly attention, and identifies push and pull factors influencing the likelihood that these themes will be addressed in future research....

  4. Interfirm collaboration in the fuzzy front-end of the innovation process - Exploring new forms of collaboration

    DEFF Research Database (Denmark)

    Bergenholtz, Carsten; Jørgensen, Jacob Høj; Goduscheit, Rene Chester

    The objective of this paper is to elaborate on the differentiating characteristics between intra-firm and inter-firm innovation projects in the Fuzzy Front-End (FFE) of the innovation process. Focus is on management methods of the collaboration and the CEO-commitment to the project. The main point...... is the balance between to types of structure, namely: Structure of Content and structure of Process.  The right balance of these two kinds of structure will ensure that the focal company benefits from the creative input from the inter-organisational innovation partners and that they stay committed...

  5. Innovation and decision-making process in reverse logistics: a bibliometric analysis

    Directory of Open Access Journals (Sweden)

    Fernando Antonio Guimarães Tenório

    2014-05-01

    Full Text Available This work aimed to make a bibliometric analysis on empirical studies that focus on the reverse logistics process. Papers published in two major events of management and a production engineering were collected during the years 2007-2012. To perform the analysis assumptions were adopted as the concepts of innovation and decision-making. 43 articles were analyzed and it was found that, in most cases, organizations choose to deploy reverse logistics as a means to solving problems related to environmental laws and regulations and after its implementation, the decision-making process related to the network of companies that perform reverse logistics remains restricted to the adopter company, thus becoming a centralized decision-making process. It was also found that reverse logistics is, in most cases, an innovation in the supply chain, it provides a new way to manage and operate the return and recycling of waste products and generating competitive advantages in the form of increased net income and better picture of the organization to its partners and customers.

  6. Service Process Innovation and the Role of Added Value in Buyer-Seller Relationships

    DEFF Research Database (Denmark)

    Holzweber, Markus

    2011-01-01

    data that have been collected through 12 interviews with managers and employees at a wholesaler of electronic consumer equipment and a leading FM service provider. Findings – The results indicate that significant benefits due to process innovation, here PDF-invoicing, has been the more intensive...... of relationships, and in establishing a strategic partnership. This is mainly due to the fact that it can be costly to include users when changing service processes without a deep understanding of technology and customer needs. Originality/value – The paper provide issues to help organizations manage the value...... creation process. The study shows that a sales company is not restricted to making value propositions when outsourcing non core business tasks to a service provider, but can actively influence and direct customers in their fulfillment of value creation....

  7. Disinfection by-products/precursor control using an innovative treatment process -- high energy electron beam irradiation

    International Nuclear Information System (INIS)

    Sawal, K.; Millington, B.; Slifker, R.A.; Cooper, W.J.; Nickelsen, M.G.; Kurucz, C.N.; Waite, T.D.

    1993-01-01

    When waters containing naturally occurring humic substances, precursors, are chlorinated, reaction (disinfection) by-products (DBPs) that may compromise the chemical water quality of the drinking water are formed. Two options exist for the treatment of THMs and other DBPs, removal of precursor material prior to chlorination, or destruction of the by-products once they are formed. The authors have initiated a study using an innovative process, high energy electron beam irradiation, as an alternative treatment for the destruction of toxic organic compounds. Preliminary studies indicated that the process would also be effective in the removal of precursors. An added advantage of this process is that is would serve as a primary disinfectant, destroying any toxic compounds in the source water and may assist in the removal of algae and cyanobacteria toxins. This paper discusses studies in precursor removal and control of THMs

  8. Managing the Process of Development of the Region’s Infrastructure through the Attraction of Investment in Innovation

    Directory of Open Access Journals (Sweden)

    Zabarna Eleonora M.

    2017-06-01

    Full Text Available The purpose and tasks of the study are determining the main directions for activating the investment process of innovation orientation in the system of infrastructure development of the regions of Ukraine. The article carries out an analysis and identifies negative trends in the regional investment sphere. It has been displayed that structural changes in order to achieve a stable rate of economic growth requires the search for effective instruments to mobilize investment resources for innovative production. The need for allocation of the innovation vector as a priority to attract investment to regions has been proven. To this end, conceptual approaches to improving the infrastructure of region have been proposed: establishment of regional innovation centers for new technologies, which will, among other things, facilitate development of the regional market for securities and special insurance funds. In this regard, the main directions of the regional innovation-investment policy have been outlined.

  9. Entrepreneurial Interest in Product Innovation-based Organic Processed Food in SMEs in Malang, Indonesia

    Directory of Open Access Journals (Sweden)

    Sri Muljaningsih

    2015-12-01

    Full Text Available The underlying reason for conducting the study is need for organic processed food. Producing innovative organic processed food is not an easy task since it requires creativity. The statement of the problem is how to create entrepreneurial interest to produce organic processed food. The study is a qualitative study of which purpose is to describe organic processed food SMEs behavior. There are 7 (seven informants involved in the study. The setting of the study is SMEs in “Lily go to organic Group” community in Malang, Indonesia. Variables of entrepreneurial interest in organic processed food involve attitude, subjective norms and perceived behavioral control. The findings show that creativity influences entrepreneurial interest in organic processed food and it results in creativity. Creativity is also the result of spiritual entrepreneurship that takes understanding towards organic processed food material into consideration. In addition, Lily Group members also take time, capital, raw materials and marketing into account. Another finding reveals that sincerity and strong determination facilitates organic processed food entrepreneurs to work their best. Such determination needs reinforcement from other related party so that the product is accepted by customers.

  10. Innovation Across the Supply Chain

    DEFF Research Database (Denmark)

    Druehl, Cheryl; Carrillo, Janice; Hsuan, Juliana

    Innovation is an integral part of every firm’s ongoing operations. Beyond product innovation, supply chain innovations offer a unique source of competitive advantage. We synthesize recent research on innovation in the supply chain, specifically, innovative supply chain processes...

  11. The Defense Waste Processing Facility: an innovative process for high-level waste immobilization

    International Nuclear Information System (INIS)

    Cowan, S.P.

    1985-01-01

    The Defense Waste Processing Facility (DWPF), under construction at the Department of Energy's Savannah River Plant (SRP), will process defense high-level radioactive waste so that it can be disposed of safely. The DWPF will immobilize the high activity fraction of the waste in borosilicate glass cast in stainless steel canisters which can be handled, stored, transported and disposed of in a geologic repository. The low-activity fraction of the waste, which represents about 90% of the high-level waste HLW volume, will be decontaminated and disposed of on the SRP site. After decontamination the canister will be welded shut by an upset resistance welding technique. In this process a slightly oversized plug is pressed into the canister opening. At the same time a large current is passed through the canister and plug. The higher resistance of the canister/plug interface causes the heat which welds the plug in place. This process provides a high quality, reliable weld by a process easily operated remotely

  12. Dynamics of the Economic Effect in the Process of Managing the Life Cycle of Innovations in Terms of Their Commercialization

    Directory of Open Access Journals (Sweden)

    Tymofeyev Dmytro V.

    2017-01-01

    Full Text Available The article is aimed at studying the theoretical aspects of changes in the dynamics of economic effect in the processes of management of life cycle of the industrial innovations at the stage of their commercialization. On the basis of an analysis of the scientific papers by the domestic and the foreign authors on methods of commercialization of the innovative products, the current status and essence of the definitions of «innovation», «commercialization», and «economic effect» was researched. Possibilities of managing the duration of the stage of commercialization of innovations were researched. It has been proposed to implement extension of the maturity stage of the life cycle of innovation by reducing the phase of designing and creating the innovative product and, as a consequence, change of value of the cumulative economic effect. Further researches should focus on the interdependence of development costs, creating an innovation and time period for the implementing, as well as determine the mechanism for calculating the quantitative indicators of commercialization of innovations.

  13. The innovative process of Brazilian and US orange juice processors: a comparison using patent analysis

    Directory of Open Access Journals (Sweden)

    Fabiana Ribeiro Rossi

    2015-09-01

    Full Text Available Since the 1980s, Brazil is the world´s leading producer of orange juice, and since that time has been followed by the United States (US. Over 90% of all orange juice produced in Brazil is exported, while US production is basically dedicated to internal consumption. The objective of this study was to compare the patenting dynamics of the orange juice processing industries in both Brazil and the US between 1978 and 2012. This was done by conducting a search in the Derwent Innovations Index (DII and analyzing the patent applications exclusively related to orange juice processing. For this period, a total of 45 patent applications were found, 43 filed by US processors and two by Brazilian processors. It was seen that brand ownership on the part of US processors may have led to a greater need for more innovation in their end products, compared to Brazilian processors that mainly produce and export commodities while acquiring foreign technology in the form of machinery and inputs.

  14. Using innovative instructional technology to meet training needs in public health: a design process.

    Science.gov (United States)

    Millery, Mari; Hall, Michelle; Eisman, Joanna; Murrman, Marita

    2014-03-01

    Technology and distance learning can potentially enhance the efficient and effective delivery of continuing education to the public health workforce. Public Health Training Centers collaborate with instructional technology designers to develop innovative, competency-based online learning experiences that meet pressing training needs and promote best practices. We describe one Public Health Training Center's online learning module design process, which consists of five steps: (1) identify training needs and priority competencies; (2) define learning objectives and identify educational challenges; (3) pose hypotheses and explore innovative, technology-based solutions; (4) develop and deploy the educational experience; and (5) evaluate feedback and outcomes to inform continued cycles of revision and improvement. Examples illustrate the model's application. These steps are discussed within the context of design practices in the fields of education, engineering, and public health. They incorporate key strategies from across these fields, including principles of programmatic design familiar to public health professionals, such as backward design. The instructional technology design process we describe provides a structure for the creativity, collaboration, and systematic strategies needed to develop online learning products that address critical training needs for the public health workforce.

  15. Innovative technologies on fuel assemblies cleaning for sodium fast reactors: First considerations on cleaning process

    Energy Technology Data Exchange (ETDEWEB)

    Simon, N.; Lorcet, H.; Beauchamp, F.; Guigues, E. [CEA, DEN, DTN Cadarache, F-13108 Saint-Paul-lez-Durance (France); Lovera, P.; Fleche, J. L. [CEA, DEN, DPC Saclay, F-91191 Gif-sur-Yvette (France); Lacroix, M. [CEA, DEN, DTN Cadarache, F-13108 Saint-Paul-lez-Durance (France); Carra, O. [AREVA / NP, 10 Rue Juliette Recamier, 69003 Lyon (France); Dechelette, F. [CEA, DEN, DTN Cadarache, F-13108 Saint-Paul-lez-Durance (France); Prele, G. [EDF/SEPTEN, 12-14 avenue Dutrievoz, 69628 Villeurbane Cedex (France); Rodriguez, G. [CEA, DEN, DTN Cadarache, F-13108 Saint-Paul-lez-Durance (France)

    2012-07-01

    Within the framework of Sodium Fast Reactor development, innovative fuel assembly cleaning operations are investigated to meet the GEN IV goals of safety and of process development. One of the challenges is to mitigate the Sodium Water Reaction currently used in these processes. The potential applications of aqueous solutions of mineral salts (including the possibility of using redox chemical reactions) to mitigate the Sodium Water Reaction are considered in a first part and a new experimental bench, dedicated to this study, is described. Anhydrous alternative options based on Na/CO{sub 2} interaction are also presented. Then, in a second part, a functional study conducted on the cleaning pit is proposed. Based on experimental feedback, some calculations are carried out to estimate the sodium inventory on the fuel elements, and physical methods like hot inert gas sweeping to reduce this inventory are also presented. Finally, the implementation of these innovative solutions in cleaning pits is studied in regard to the expected performances. (authors)

  16. Factors associated with staff development processes and the creation of innovative science courses in higher education

    Science.gov (United States)

    Hodges, Jeanelle Bland

    1999-11-01

    The purpose of the study was to determine factors associated with staff development processes and the creation of innovative science courses by higher education faculty who have participated in a model staff development project. The staff development program was designed for college faculty interested in creating interdisciplinary, constructivist-based science, mathematics, or engineering courses designed for non-majors. The program includes workshops on incorporating constructivist pedagogy, alternative assessment, and technology into interdisciplinary courses. Staff development interventions used in the program include grant opportunities, distribution of resource materials, and peer mentoring. University teams attending the workshops are comprised of faculty from the sciences, mathematics, or engineering, as well as education, and administration. A purposeful and convenient sample of three university teams were subjects for this qualitative study. Each team had attended a NASA Opportunities for Visionary Academics (NOVA) workshop, received funding for course development, and offered innovative courses. Five questions were addressed in this study: (a) What methods were used by faculty teams in planning the courses? (b) What changes occurred in existing science courses? (c) What factors affected the team collaboration process? (d) What personal characteristics of faculty members were important in successful course development? and (e) What barriers existed for faculty in the course development process? Data was collected at each site through individual faculty interviews (N = 11), student focus group interviews (N = 15), and classroom observations. Secondary data included original funding proposals. The NOVA staff development model incorporated effective K--12 interventions with higher education interventions. Analysis of data revealed that there were four factors of staff development processes that were most beneficial. First, the team collaborative processes

  17. Innovative food processing technology using ohmic heating and aseptic packaging for meat.

    Science.gov (United States)

    Ito, Ruri; Fukuoka, Mika; Hamada-Sato, Naoko

    2014-02-01

    Since the Tohoku earthquake, there is much interest in processed foods, which can be stored for long periods at room temperature. Retort heating is one of the main technologies employed for producing it. We developed the innovative food processing technology, which supersede retort, using ohmic heating and aseptic packaging. Electrical heating involves the application of alternating voltage to food. Compared with retort heating, which uses a heat transfer medium, ohmic heating allows for high heating efficiency and rapid heating. In this paper we ohmically heated chicken breast samples and conducted various tests on the heated samples. The measurement results of water content, IMP, and glutamic acid suggest that the quality of the ohmically heated samples was similar or superior to that of the retort-heated samples. Furthermore, based on the monitoring of these samples, it was observed that sample quality did not deteriorate during storage. © 2013. Published by Elsevier Ltd on behalf of The American Meat Science Association. All rights reserved.

  18. The effects of innovative changes influence on social and economic processes of the region development

    Directory of Open Access Journals (Sweden)

    T. O. Tolstykh

    2017-01-01

    Full Text Available Development of strategy of social and economic development of the Voronezh region till 2035 requires the careful analysis of a condition of all activities of the region, their interaction and interference. The special role in this process belongs to the higher school as the engine of knowledge, information and innovations. In case of all conservatism of an education system its task not only to give estimates and forecasts of the future, but also to serve as a leader of changes in all industries. The models realizing these tasks are a possibility of receipt of the effective instrument of increase in innovation of potential of economy of the region, forming of the environment which is adequately reflecting scientific and technical and economic challenges of modern realities and also developments of processes and technologies of transition of economy of the region to the principles of digital economy. Direct task of the higher school are increase in the amount of knowledge which is saved up by society, handling and transformation of information to knowledge, generation of new information and new knowledge, forming of the competitive specialist. In article approaches to an impact assessment of changes in the higher school on processes of social and economic development of the region, to classification of straight lines and side effects (spillover-effects in the conditions of development of programs of a strategic development of the region are considered, the model of development of the higher school taking into account spillover-effect based on the principles of digital economy is offered. For the purpose of an impact assessment of changes in the higher school on processes of social and economic development in the region the task is set to analyse influence of various factors at each other, and also on basic factors of economic growth of the region.

  19. IMPLEMENTING INNOVATIVE TECHNOLOGIES OF FUTURE SPECIALISTS’ PERSONAL AND PROFESSIONAL DEVELOPMENT IN THE TRAINING PROCESS

    Directory of Open Access Journals (Sweden)

    Halyna Kovalchuk

    2017-04-01

    Full Text Available The article deals with the problem of implementing innovative technologies of future specialists’ personal and professional development in the training process. The necessity of developing professional and personality-centered education is disclosed in National Doctrine of Education Development. The analysis of studied issue proves that it has various components and manifests that are revealed in the scientists’ works (I. Bekh, A. Heilyk, H. Zborovskyi, T. Parson, V. Bezpalko, V. Bykov, S, Ziazun and others. The aim of the article is to highlight the methodological and methodical approaches to future specialists’ personal and professional development by means of innovative teaching technologies. The article discloses some aspects of implementing technologies of profession-oriented, competence and personality-oriented training of future specialists in higher educational establishments. The special attention is paid to their personal and professional development by means of innovative teaching technologies. The personal dimension is considered to be a leading factor of achieving the main aim of humanistic school – personal self-realization. The role of autonomic learning for achieving didactic goals and future specialists’ self-designing at universities is identified. The methodological approaches (anthropocentric and sociocentric, action-praxeological, axiological, acmeological, productive, integrative, interactive, narrative, which promote implementing professional-oriented, competence and personality-centered technologies of future specialists’ training, are characterized. The conclusion is drawn that educational technologies are the main tools for supporting training quality of future specialists in the field of economics and business; forming their professional competences and professionally significant personal qualities that are the components of humanitarian principles of community development; providing quality of life at the

  20. Collaboration with Customers in Network-Based Innovation Processes - Network and relations in the Fuzzy Front-End

    DEFF Research Database (Denmark)

    Jørgensen, Jacob Høj

    Abstract There is a general tendency that product life cycles get shortened and there is an increased customer demand for individualized products. These trends put pressure on companies to continuously bring new products to the market (Cooper & Kleinschmidt 1987a)   Further it is a tendency...... that users of products are becoming more able to innovate by them selves rather than wait for the manufacturer to make the desired changes to products. This regards both fims and individual consumers (von Hippel 2005). Often these customers develop important product- and process innovations (Harhoff, Henkel......, & von Hippel 2003).   A possible response to the above described challenges of customization and faster innovation processes could be a closer collaboration with customers through strong and early linkages (Rothwell 1994).   This article extends the different concepts of "user-innovation" originated...

  1. Technological Innovation of Agricultural Products Processing Enterprises from the Perspective of Modern Marketing——A Case of Agricultural Products Processing Enterprises in Hubei Province,China

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    The science and technology development of agricultural products processing enterprises in Hubei Province is analyzed.From the perspective of modern marketing,problems in the research and development work of agricultural products processing enterprises are analyzed from the aspects of market,personal training and technology radiation,which are mainly the lack of close connection with market.Countermeasures for the technological innovation of agricultural products processing enterprises are put forward,such as establishing modern enterprise culture with innovative features,strengthening the market benefits of brand,constructing a comprehensive customer orientation information platform,scientifically predicting and developing the market,doing well in market positioning of enterprise,selecting corresponding technology innovation strategy,taking technological innovation strategy as the basis,realizing the transformation from "4P" marketing combination to "4C",cultivating technical personnel,and realizing the integration of professional skill and marketing ability.

  2. Supplier Innovation

    DEFF Research Database (Denmark)

    Søberg, Peder Veng; Notman, Dorian Mark; Wæhrens, Brian Vejrum

    2017-01-01

    The prevailing research in supplier innovation has been conceptual or based on small data sets. The analysis of a large data set gives a clearer perspective on the actual type and degree of involvement of suppliers in the customer’s innovation process. The supplier perspective of the research...... counterbalances the customer bias that exists in the prevailing literature in this area. Similarly, the issue of the benefit of supplier involvement in the innovation/NPD process can be better understood. Manufacturing suppliers benefit financially from their involvement in the innovation/NPD process of their key...

  3. Aerosol processing: a wind of innovation in the field of advanced heterogeneous catalysts.

    Science.gov (United States)

    Debecker, Damien P; Le Bras, Solène; Boissière, Cédric; Chaumonnot, Alexandra; Sanchez, Clément

    2018-04-16

    Aerosol processing is long known and implemented industrially to obtain various types of divided materials and nanomaterials. The atomisation of a liquid solution or suspension produces a mist of aerosol droplets which can then be transformed via a diversity of processes including spray-drying, spray pyrolysis, flame spray pyrolysis, thermal decomposition, micronisation, gas atomisation, etc. The attractive technical features of these aerosol processes make them highly interesting for the continuous, large scale, and tailored production of heterogeneous catalysts. Indeed, during aerosol processing, each liquid droplet undergoes well-controlled physical and chemical transformations, allowing for example to dry and aggregate pre-existing solid particles or to synthesise new micro- or nanoparticles from mixtures of molecular or colloidal precursors. In the last two decades, more advanced reactive aerosol processes have emerged as innovative means to synthesise tailored-made nanomaterials with tunable surface properties, textures, compositions, etc. In particular, the "aerosol-assisted sol-gel" process (AASG) has demonstrated tremendous potential for the preparation of high-performance heterogeneous catalysts. The method is mainly based on the low-cost, scalable, and environmentally benign sol-gel chemistry process, often coupled with the evaporation-induced self-assembly (EISA) concept. It allows producing micronic or submicronic, inorganic or hybrid organic-inorganic particles bearing tuneable and calibrated porous structures at different scales. In addition, pre-formed nanoparticles can be easily incorporated or formed in a "one-pot" bottom-up approach within the porous inorganic or hybrid spheres produced by such spray drying method. Thus, multifunctional catalysts with tailored catalytic activities can be prepared in a relatively simple way. This account is an overview of aerosol processed heterogeneous catalysts which demonstrated interesting performance in

  4. Building Process Organisation Model fit for Innovative Housing Concepts? Case Study of the Netherlands

    Energy Technology Data Exchange (ETDEWEB)

    Kondratenko, I.; Jablonska, B. [ECN , Petten (Netherlands)

    2009-11-15

    There is growing justification and political commitment in Europe to tackle energy efficiency in new and existing buildings, both residential and non-residential. It requires shifting the construction sector towards large scale successful implementation of innovative energy efficient and sustainable building concepts. Nowadays, a number of innovative building concepts exist, to name a few: Very Low Energy, Passive House, Zero-Energy, Zero-Emission, Energy Producing, etc. However, the experience in the Netherlands has shown inflexibility in the behaviour within the traditional building process to allow the necessary changes for large scale introduction of innovative integral building concepts. This has led to examining the question: 'How well does the building process organisation model in the Netherlands allow the implementation of innovative housing building concepts?' Answering this question requires specific knowledge of the behaviour of the traditional building process, its characteristics, advantages and disadvantages, phases and actors involved. It also demanded to focus on the nature of barriers within, and on possibilities to overcome identified bottlenecks. Also, examined was the suitability of several selected novel concepts in their opportunities for adapting the building process organisation model and the behaviour of actors within, such as: The Life Cycle Analysis, (including the Whole Building Life Cycle Costing and the Least Life Cycle Costing), The Cradle to Cradle (C2C) Concept, The Living Building Concept and Private Initiatives. This also included recent experiences with building projects implementing these concepts in the Netherlands. In summary, there are a number of challenges. The traditional building process in the Netherlands is fragmented in nature into successive phases with a strict way of cooperation and division of tasks and responsibilities between actors. There is also a cost / risk approach preventing enabling long

  5. Integration of treatment innovation planning and implementation: strategic process models and organizational challenges.

    Science.gov (United States)

    Lehman, Wayne E K; Simpson, D Dwayne; Knight, Danica K; Flynn, Patrick M

    2011-06-01

    Sustained and effective use of evidence-based practices in substance abuse treatment services faces both clinical and contextual challenges. Implementation approaches are reviewed that rely on variations of plan-do-study-act (PDSA) cycles, but most emphasize conceptual identification of core components for system change strategies. A two-phase procedural approach is therefore presented based on the integration of Texas Christian University (TCU) models and related resources for improving treatment process and program change. Phase 1 focuses on the dynamics of clinical services, including stages of client recovery (cross-linked with targeted assessments and interventions), as the foundations for identifying and planning appropriate innovations to improve efficiency and effectiveness. Phase 2 shifts to the operational and organizational dynamics involved in implementing and sustaining innovations (including the stages of training, adoption, implementation, and practice). A comprehensive system of TCU assessments and interventions for client and program-level needs and functioning are summarized as well, with descriptions and guidelines for applications in practical settings. (PsycINFO Database Record (c) 2011 APA, all rights reserved).

  6. 77 FR 11700 - Application, Review, and Reporting Process for Waivers for State Innovation

    Science.gov (United States)

    2012-02-27

    ... State Innovation AGENCY: Centers for Medicare & Medicaid Services (CMS), HHS; Department of the Treasury... of initial applications for a Waiver for State Innovation described in section 1332 of the Patient... Treasury (the Secretaries) to issue regulations regarding procedures for Waivers for State Innovation under...

  7. 76 FR 13553 - Application, Review, and Reporting Process for Waivers for State Innovation

    Science.gov (United States)

    2011-03-14

    ... State Innovation AGENCY: Centers for Medicare & Medicaid Services (CMS), HHS; Department of the Treasury... review of initial applications for a Waiver for State Innovation described in section 1332 of the Patient... State Innovation, Room 3050, Department of the Treasury, 1500 Pennsylvania Avenue, NW., Washington, DC...

  8. Paving the way forward: A case study in innovation and process control

    NARCIS (Netherlands)

    Miller, Seirgei Rosario; Doree, Andries G.; ter Huerne, Henderikus L.; Sluer, B.; Beuving, E.

    2008-01-01

    Co-operation between clients and the private sector provides significant opportunities to promote innovation in the road construction industry. This paper describes such an innovation project. In 2006, the Dutch ministry of Transport organised an innovation competition, challenging contractors to

  9. Sensitive innovation

    DEFF Research Database (Denmark)

    Søndergaard, Katia Dupret

    Present paper discusses sources of innovation as heterogenic and at times intangible processes. Arguing for heterogeneity and intangibility as sources of innovation originates from a theoretical reading in STS and ANT studies (e.g. Callon 1986, Latour 1996, Mol 2002, Pols 2005) and from field work...... in the area of mental health (Dupret Søndergaard 2009, 2010). The concept of sensitive innovation is developed to capture and conceptualise exactly those heterogenic and intangible processes. Sensitive innovation is therefore primarily a way to understand innovative sources that can be......, but are not necessarily, recognized and acknowledged as such in the outer organisational culture or by management. The added value that qualifies these processes to be defined as “innovative” are thus argued for along different lines than in more traditional innovation studies (e.g. studies that build on the classic...

  10. Framing Innovation

    DEFF Research Database (Denmark)

    Haase, Louise Møller; Laursen, Linda Nhu

    2017-01-01

    Designing a remarkable product innovation is a difficult challenge, which businesses today continuously are striving to tackle. This challenge is particularly present in the early phase of innovation, where the main product concept and frames of the innovation is determined. As a main challenge...... in the early phase is the reasoning process; innovation team are faced with open- ended ill-defines problems, where they need to make decisions about an unknown future having only incomplete, ambiguous and contradicting insights available. We study the reasoning of experts, how they frame to make sense of all...... the insights and create a basis for decision making in relation to a new project. Based on case studies of five innovative products from various industries, we suggest a Product Reasoning Model for understanding reasoning and envisioning of new product innovations in the early phases of innovation....

  11. US and Russian innovative technologies to process low-level liquid radioactive wastes: The Murmansk initiative

    International Nuclear Information System (INIS)

    Dyer, R.S.; Duffey, R.B.; Penzin, R.; Sorlie, A.

    1996-01-01

    This paper documents the status of the technical design for the upgrade and expansion to the existing Low-level Liquid Radioactive Waste (LLLRW) treatment facility in Murmansk, the Russian Federation. This facility, owned by the Ministry of Transportation and operated by the Russian company RTP Atomflot in Murmansk, Russia, has been used by the Murmansk Shipping Company (MSCo) to process low-level liquid radioactive waste generated by the operation of its civilian icebreaker fleet. The purpose of the new design is to enable Russia to permanently cease the disposal at sea of LLLRW in the Arctic, and to treat liquid waste and high saline solutions from both the Civil and North Navy Fleet operations and decommissioning activities. Innovative treatments are to be used in the plant which are discussed in this paper

  12. On-line process analysis innovation: DiComp (tm) shunting dielectric sensor technology

    Science.gov (United States)

    Davis, Craig R.; Waldman, Frank A.

    1993-01-01

    The DiComp Shunting Dielectric Sensor (SDS) is a new patent-pending technology developed under the Small Business Innovation Research Program (SBIR) for NASA's Kennedy Space Center. The incorporation of a shunt electrode into a conventional fringing field dielectric sensor makes the SDS uniquely sensitive to changes in material dielectric properties in the KHz to MHz range which were previously detectable only at GHz measurement frequencies. The initial NASA application of the SDS for Nutrient Delivery Control has demonstrated SDS capabilities for thickness and concentration measurement of Hoagland nutrient solutions. The commercial introduction of DiComp SDS technology for concentration and percent solids measurements in dispersions, emulsions and solutions represents a new technology for process measurements for liquids in a variety of industries.

  13. Interorganizational Diffusion and Transformation of Knowledge in the Process of Product Innovation

    DEFF Research Database (Denmark)

    Vinding, Anker Lund

    In the knowledge-based economy interorganizational interaction is regarded as crucial in the process of product innovation. Contributions from Lundvall, Von Hippel and the resource based view of the firm all argue that absorptive capacity is of importance for an efficient use of external knowledge...... knowledge the firm also needs to invest in the establishment of channels and codes of communication to external parties. By emphasizing the relative aspect of absorptive capacity as investment in social capital we argue that absolute absorptive capacity and social capital are complementary. This calls...... with respect to the complementarity between the absolute and the relative aspects of absorptive capacity the dissertation concludes that complementarity exists. The implications for firms and policy makers are that in order to give effective access to absorption investment in both the internal knowledge base...

  14. Toward a Process Framework of Business Model Innovation in the Global Context

    DEFF Research Database (Denmark)

    Cao, Yangfeng; Li, Peter Ping; Skat-Rørdam, Peter

    2014-01-01

    Primarily due to the large gaps in economic and institutional contexts between the developed and emerging economies, effective business models in the two distinctive contexts tend to differ. In particular, the business model innovation (BMI) at the subsidiary level plays an important role...... in the success of multinational enterprises (MNE) from the developed economies operating in the emerging economies as top-down ventures. While some studies claim that direct involvement of headquarters (HQ) in the operations of subsidiaries is critical, surprisingly little is known about how HQ specifically...... enable BMI at the subsidiary level, especially for medium-sized MNE. Adopting the method of comparative and longitudinal case study, we tracked the BMI processes of six Danish medium-sized MNE operating in China. The emergent framework indicates that entrepreneurial aspiration and flexibility at the HQ...

  15. Demonstration of innovative partitioning processes for minor actinide recycling from high active waste solutions

    International Nuclear Information System (INIS)

    Modolo, G.; Wilden, A.; Geist, A.; Malmbeck, R.; Taylor, R.

    2014-01-01

    The recycling of the minor actinides (MA) using the Partitioning and Transmutation strategy (P and T) could contribute significantly to reducing the volume of high level waste in a geological repository and to decreasing the waste's longterm hazards originating from the long half-life of the actinides. Several extraction processes have been developed worldwide for the separation and recovery of MA from highly active raffinates (HAR, e.g. the PUREX raffinate). A multi-cycle separation strategy has been developed within the framework of European collaborative projects. The multi-cycle processes, on the one hand, make use of different extractants for every single process. Within the recent FP7 European research project ACSEPT (Actinide reCycling by SEParation and Transmutation), the development of new innovative separation processes with a reduced number of cycles was envisaged. In the so-called 'innovative SANEX' concept, the trivalent actinides and lanthanides are co-extracted from the PUREX raffinate by a DIAMEX like process (e.g. TODGA). Then, the loaded solvent is subjected to several stripping steps. The first one concerns selectively stripping the actinides(III) with selective water-soluble ligands (SO3-Ph-BTB), followed by the subsequent stripping of trivalent lanthanides. A more challenging route studied also within our laboratories is the direct actinide(III) separation from a PUREX-type raffinate using a mixture of CyMe 4 BTBP and TODGA as extractants, the so-called One cycle SANEX process. A new approach, which was also studied within the ACSEPT project, is the GANEX (Grouped ActiNide EXtraction) concept addressing the simultaneous partitioning of all transuranium (TRU) elements for their homogeneous recycling in advanced generation IV reactor systems. Bulk uranium is removed in the GANEX 1st cycle, e.g. using a monoamide extractant and the GANEX 2nd cycle then separates the TRU. A solvent composed of TODGA + DMDOHEMA in kerosene has been shown to

  16. An innovative process for the impregnation of magnet coils and other structures

    International Nuclear Information System (INIS)

    Evans, D.; Morgan, J.T.

    1992-01-01

    The need to bond and encapsulate the conductor in many types of superconductive magnet is well understood. The choice of materials for bonding may influence the performance of the coil and the technique used for its application. This paper considers the merits of three types of close-quote bonding close-quote procedure and presents details of an innovative method for the vacuum impregnation of coils. The process has been developed and evaluated in an attempt to remove some of the uncertainties of the vacuum impregnation process that traditionally may be eliminated only with the use of sealed mould tools and high quality vacuum chambers. For large magnets or for mass production, this process may lead to a reduction in tooling and plant costs, together with reduced resin consumption and improved health and safety factors. The process has been developed in conjunction with a resin system that has been designed to exhibit excellent thermal shock characteristics and to minimise preparation time and post impregnation cleaning requirements

  17. Speeding Up Innovation

    DEFF Research Database (Denmark)

    Sørensen, Flemming; Mattsson, Jan

    2016-01-01

    Minimisation of time-to-market strategies can provide companies with a competitive advantage in dynamic and competitive environments. Using parallel innovation processes has been emphasised as one strategy to speed up innovation processes and consequently minimise the time-to-market of innovations....... Much innovation today takes place in open structures in which networks play an important role. However, little is known about how innovation networks can facilitate parallel innovation processes. This paper discusses how innovation network structures develop and support exploration and exploitation...... of the network facilitate the parallel innovation process but also how such processes place new requirements on such networks and their management....

  18. Responsive Innovation

    DEFF Research Database (Denmark)

    Pedersen, Carsten

    Although the importance of stakeholder networks has been recognized in recent years, a non-teleological model that incorporates their collective sensing into innovation processes has so far not been developed. Hence, this paper argues that traditional linear and sequential innovation models...... are insufficient in hypercompetitive environments. Instead, it is proposed that companies should ground their innovation processes in the collective sensing of frontline-employees and customers that operate around the organizational periphery. This frames the concept of responsive innovation, where key...... stakeholders engaged in the organization’s ongoing business activities collectively identify issues that central managers subsequently can resolve....

  19. LINEAR ACCELERATOR FOR USE IN RADIOTHERAPY TREATMENT: STUDY OF PROCESS INNOVATION IN A SUS HOSPITAL OF SERRA GAÚCHA

    Directory of Open Access Journals (Sweden)

    Andréa Cristina Fermiano Fidelis

    2017-03-01

    Full Text Available The growth of health structures and their complexity have led Clinical Engineering professionals to carry out studies to develop and implement health technology management programs. In this way, employees of this area, integrated with the health system teams, have contributed to make feasible the use of technologies that offer greater security, functionality and reliability. The radiotherapy area, with the increase in the incidence of new cases of cancer, together with the contingency of the financial resources for health, high cost and complexity of the equipment, motivate studies for its adequate management. This research aimed to identify the technologies applied in the radiotherapy treatment, in particular the linear accelerator, as well as the concept of innovation, innovation in services, innovation in processes and the competitiveness acquired with the aid of innovation. The method used in the research has a qualitative approach, with an exploratory and descriptive objective, with semistructured and open questions and involved bibliographic research on the topic of Innovation and on Linear Accelerator, document analysis, Unit of High Complexity in Oncology visit and interviews at the General Hospital of Caxias do Sul South, presenting, finally, the impacts suffered in the hospital and in the community after the arrival of the Line Accelerator. The results showed that there was process and product innovation, incrementally, in the services offered by the hospital.

  20. Inter-firm collaboration in the Fuzzy Front-End of the innovation process - Exploring New Forms of Collaboration

    DEFF Research Database (Denmark)

    Jørgensen, Jacob Høj; Goduscheit, René Chester; Bergenholz, Carsten

    2007-01-01

    , marketing, sales. The focus of this paper is on collaboration where innovation is the main part of the collaborative effort. Innovation refers to the research and development (R&D) activity devoted to increasing scientific or technical knowledge and the application of that knowledge to the creation of new...... and tendencies in formal R&D partnering relations. This paper, however, focuses on collaboration between independent companies prior to such formal agreements as joint ventures or other contractual agreements. This first phase of the innovation process is often referred to as the Fuzzy Front-End (FFE....... In this article we examine the characteristics of the FFE phase and explore this phase in an inter-firm perspective. Through an in-depth case-study of a single firm and its innovation partners we identify parameters for improved collaboration in the FFE. In conclusion we outline a model for inter...

  1. An innovative carbonate coprecipitation process for the removal of zinc and manganese from mining impacted waters

    Science.gov (United States)

    Sibrell, P.L.; Chambers, M.A.; Deaguero, A.L.; Wildeman, T.R.; Reisman, D.J.

    2007-01-01

    Although mine drainage is usually thought of as acidic, there are many cases where the water is of neutral pH, but still contains metal species that can be harmful to human or aquatic animal health, such as manganese (Mn) and zinc (Zn). Typical treatment of mine drainage waters involves pH adjustment, but this often results in excessive sludge formation and removal of nontoxic species such as magnesium and calcium. Theoretical consideration of the stability of metal carbonate species suggests that the target metals could be removed from solution by coprecipitation with calcium carbonate. The U.S. Geological Survey has developed a limestone-based process for remediation of acid mine drainage that increases calcium carbonate saturation. This treatment could then be coupled with carbonate coprecipitation as an innovative method for removal of toxic metals from circumneutral mine drainage waters. The new process was termed the carbonate coprecipitation (CCP) process. The CCP process was tested at the laboratory scale using a synthetic mine water containing 50 mg/L each of Mn and Zn. Best results showed over 95% removal of both Mn and Zn in less than 2 h of contact in a limestone channel. The process was then tested on a sample of water from the Palmerton zinc superfund site, near Palmerton, Pennsylvania, containing over 300 mg/L Zn and 60 mg/L Mn. Treatment of this water resulted in removal of over 95% of the Zn and 40% of the Mn in the limestone channel configuration. Because of the potential economic advantages of the CCP process, further research is recommended for refinement of the process for the Palmerton water and for application to other mining impacted waters as well. ?? Mary Ann Liebert, Inc.

  2. The Influence of the Actor Network on the Innovative Process of Transgenic Soybean in Rio Grande Do Sul, Brazil

    Directory of Open Access Journals (Sweden)

    Doriana Daroit

    2009-12-01

    Full Text Available Rio Grande do Sul was the first Brazilian state to plant genetically modified soybean. The sowing occurred in 1998 with Roundup Ready soybean seeds from Monsanto smuggled from Argentina. The aim of this study is to investigate how this innovative process of planting transgenic soybean came about in Rio Grande do Sul based on the actor network involved in the period 1998 to 2003. Although the innovative process has been discussed in the literature on innovation management since the work of Schumpeter, there is still no clear understanding of the issues of interests and power that involve the innovative process. Given this, from within the literature we have sought a perspective that would understand the innovative process as being political. We adopted Actor Network Theory as a base for the discussion of the primary and secondary data obtained regarding the controversy surrounding transgenic soybean in RS. The results point to the existence of two translation chains that contribute towards the formation of actor networks.

  3. Online Innovation

    DEFF Research Database (Denmark)

    Vujovic, Sladjana; Ulhøi, John Parm

    2008-01-01

      Purpose - The aim of this paper is to investigate the role of online networking during the innovation process, including its role(s) in communication, cooperation and coordination. The paper neither implicitly assumes that online computer-based networking is a prerequisite for the innovation...... process nor denies the possibility that innovation can emerge and successfully survive without it. It merely presupposes that, in cases of innovation where information and communication technologies play a substantial role, non-proprietarity may offer an interesting alternative to innovations based...... on proprietary knowledge. Design/methodology/approach - The paper borrows from the theory of communities-of-practice, which takes into account social relations, contacts, and the transfer and incorporation of knowledge. Open source innovation is not the exclusive preserve of computer nerds, but also has...

  4. Innovation in managing the referral process at a Canadian pediatric hospital.

    Science.gov (United States)

    MacGregor, Daune; Parker, Sandra; MacMillan, Sharon; Blais, Irene; Wong, Eugene; Robertson, Chris J; Bruce-Barrett, Cindy

    2009-01-01

    The provision of timely and optimal patient care is a priority in pediatric academic health science centres. Timely access to care is optimized when there is an efficient and consistent referral system in place. In order to improve the patient referral process and, therefore, access to care, an innovative web-based system was developed and implemented. The Ambulatory Referral Management System enables the electronic routing for submission, review, triage and management of all outpatient referrals. The implementation of this system has provided significant metrics that have informed how processes can be improved to increase access to care. Use of the system has improved efficiency in the referral process and has reduced the work associated with the previous paper-based referral system. It has also enhanced communication between the healthcare provider and the patient and family and has improved the security and confidentiality of patient information management. Referral guidelines embedded within the system have helped to ensure that referrals are more complete and that the patient being referred meets the criteria for assessment and treatment in an ambulatory setting. The system calculates and reports on wait times, as well as other measures.

  5. Bio-mechanical assessment toward throwing and lifting process of i-LOCA (Innovative Lobster Catcher)

    Science.gov (United States)

    Sudiarno, A.; Dewi, D. S.; Putri, M. A.

    2018-04-01

    Indonesia is the country rich in marine resource, one of which is lobster. East java, one of Indonesian province, especially in Region of Gresik and Lamogan, has very huge potential of lobster. Current condition shown that lobster catch by the fisherman mostly depend on lucky factor, which the lobster unintentionally trapped in fisherman’s fish net. By using this mechanism, the number of lobster catch cannot be optimum. Previous researches have produced two versions of i-LOCA, Innovative Lobster Catcher, a special tool for catching the lobster. Although produce more lobster catch, second version of i-LOCA still needs to be scrutinized, one of that is bio-mechanical assessment. The second version of i-LOCA still has no tool to ease throwing and lifting it into the sea. This condition cause Musculoskeletal Disorder (MSD) toward the fisherman. This research perform bio-mechanical assessment toward throwing and lifting process in order to suggest improvement for i-LOCA as the third version. Based on body moment calculation, we found that throwing and lifting process of third version of i-LOCA, each was 3 times and 2 times better than second version of i-LOCA. Meanwhile, Rapid Entire Body Assessment (REBA) score of throwing and lifting process for third version of i-LOCA can be reduced by 5 points compared to second version of i-LOCA.

  6. Innovation Chinese rice wine brewing technology by bi-acidification to exclude rice soaking process.

    Science.gov (United States)

    Wei, Xiao Lu; Liu, Shuang Ping; Yu, Jian Shen; Yu, Yong Jian; Zhu, Sheng Hu; Zhou, Zhi Lei; Hu, Jian; Mao, Jian

    2017-04-01

    As a traditional fermented alcoholic beverage of China, Chinese rice wine (CRW) had a long history of more than 5000 years. Rice soaking process was the most crucial step during CRW brewing process, because rice soaking quality directly determined the quality of CRW. However, rice soaking water would cause the eutrophication of water bodies and waste of water. The longer time of rice soaking, the higher the content of biogenic amine, and it would have a huge impact on human health. An innovation brewing technology was carried out to exclude the rice soaking process and the Lactobacillus was added to make up for the total acid. Compared to the traditional brewing technology, the new technology saved water resources and reduced environmental pollution. The concentration of biogenic amine was also decreased by 27.16%, which improving the security of the CRW. The esters increased led to more soft-tasted CRW and less aging time; the quality of CRW would be improved with less alcohol. Copyright © 2016 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

  7. Accidental Innovation

    DEFF Research Database (Denmark)

    Austin, Robert D.; Devin, Lee; Sullivan, Erin E.

    2012-01-01

    Historical accounts of human achievement suggest that accidents can play an important role in innovation. In this paper, we seek to contribute to an understanding of how digital systems might support valuable unpredictability in innovation processes by examining how innovators who obtain value from...... they incorporate accidents into their deliberate processes and arranged surroundings. By comparing makers working in varied conditions, we identify specific factors (e.g., technologies, characteristics of technologies) that appear to support accidental innovation. We show that makers in certain specified...... conditions not only remain open to accident but also intentionally design their processes and surroundings to invite and exploit valuable accidents. Based on these findings, we offer advice for the design of digital systems to support innovation processes that can access valuable unpredictability....

  8. Approaching Service Innovation Patterns

    OpenAIRE

    Andrea NAGY

    2013-01-01

    The present paper aims at analyzing the types of innovation in the field of services. First, the concept of innovation is defined and second, field literature is reviewed from the perspective of service innovation. The main types of innovation are identified based on several attempts at defining innovation, the most notable being Schumpeter’s. Thus, it is possible to approach concepts such as product and process innovation, incremental and radical innovation. Another aim has been to regard se...

  9. Innovative process for biogas upgrading with CO2 storage: Results from pilot plant operation

    International Nuclear Information System (INIS)

    Baciocchi, Renato; Carnevale, Ennio; Corti, Andrea; Costa, Giulia; Lombardi, Lidia; Olivieri, Tommaso; Zanchi, Laura; Zingaretti, Daniela

    2013-01-01

    An innovative biogas upgrading method that, differs from the currently employed commercial techniques, allows also to capture and store the separated CO 2 is investigated. This process, named Alkali absorption with Regeneration (AwR), consists in a first step in which CO 2 is separated from the biogas by chemical absorption with an alkali aqueous solution followed by a second step in which the spent absorption solution is regenerated for reuse in the first step of the upgrading process and the captured CO 2 is stored in a solid and thermodynamically stable form. The latter process is carried out contacting the spent absorption solution, rich in carbonate and bicarbonate ions, with a waste material – air pollution control (APC) residues from Waste-to-Energy plants – characterized by a high content of calcium hydroxide and leads to the precipitation of calcium carbonate and to the regeneration of the alkali hydroxide content of the solution. The process was tested in a specifically designed pilot plant fed with 20 m 3 h −1 (gas at standard conditions of 273 K and 1001 kPa) of landfill gas. Results showed that a high CH 4 content in the outlet gas can be obtained using a 3.8 mol L −1 NaOH aqueous solution with a solution/landfill gas ratio of about 9 L m −3 (gas at standard conditions of 273 K and 1001 kPa). The regeneration process proved to be feasible, but its efficiency was limited by several factors to maximum values in the range of 50–60 %, showing to decrease with higher NaOH concentrations in the absorption solution. Absorption tests with regenerated load solutions after appropriate NaOH makeup, did not show appreciable differences with respect to raw solutions

  10. Applying Idea Management System (IMS Approach to Design and Implement a collaborative Environment in Public Service related open Innovation Processes

    Directory of Open Access Journals (Sweden)

    Marco Alessi

    2015-12-01

    Full Text Available Novel ideas are the key ingredients for innovation processes, and Idea Management System (IMS plays a prominent role in managing captured ideas from external stakeholders and internal actors within an Open Innovation process. By considering a specific case study, Lecce-Italy, we have designed and implemented a collaborative environment, which provides an ideal platform for government, citizens, etc. to share ideas and co-create the value of innovative public services in Lecce. In this study the application of IMS with six main steps, including: idea generation, idea improvement, idea selection, refinement, idea implementation, and monitoring, shows that this, remarkably, helps service providers to exploit the intellectual capital and initiatives of the regional stakeholders and citizens and assist service providers to stay in line with the needs of society. Moreover, we have developed two support tools to foster collaboration and transparency: sentiment analysis tool and gamification application.

  11. User-led innovations and participation processes: lessons from sustainable energy technologies

    International Nuclear Information System (INIS)

    Ornetzeder, Michael; Rohracher, Harald

    2006-01-01

    In this paper we will pose the question whether a higher level of user participation could be used as a strategy to improve the development and dissemination of sustainable energy technologies. We will especially focus on user-led innovation processes with a high involvement of individual end-users. In our argument we will draw on several case studies in the field of renewable energy technologies-in particular solar collectors and biomass heating systems-and sustainable building technologies. Users in these case studies were involved in the design or planning processes, sometimes in a very selective way and with limited influence, sometimes very active and for quite a long period of time. Especially in the case of renewable energy technologies self-building groups were highly successful and resulted in improved and widely disseminated technologies. Based on the empirical results of our case studies we will critically discuss the potential of user involvement (especially in self-building groups) for the development and promotion of sustainable energy technologies and outline technological and social pre-conditions for the success of such approaches

  12. User-led innovations and participation processes: lessons from sustainable energy technologies

    Energy Technology Data Exchange (ETDEWEB)

    Ornetzeder, Michael [ZSI - Centre for Social Innovation, Linke Wienzeile 246, A-1150 Vienna (Austria); Rohracher, Harald [IFF/IFZ - Inter-University Research Centre for Technology, Work and Culture, Schloegelgasse 2, A-8010 Graz (Austria)

    2006-01-01

    In this paper we will pose the question whether a higher level of user participation could be used as a strategy to improve the development and dissemination of sustainable energy technologies. We will especially focus on user-led innovation processes with a high involvement of individual end-users. In our argument we will draw on several case studies in the field of renewable energy technologies-in particular solar collectors and biomass heating systems-and sustainable building technologies. Users in these case studies were involved in the design or planning processes, sometimes in a very selective way and with limited influence, sometimes very active and for quite a long period of time. Especially in the case of renewable energy technologies self-building groups were highly successful and resulted in improved and widely disseminated technologies. Based on the empirical results of our case studies we will critically discuss the potential of user involvement (especially in self-building groups) for the development and promotion of sustainable energy technologies and outline technological and social pre-conditions for the success of such approaches. (author)

  13. User-led innovations, participation processes and the use of energy technologies

    Energy Technology Data Exchange (ETDEWEB)

    Ornetzeder, Michael [Centre for Social Innovation, Vienna (Austria); Rohracher, Harald [Inter-Univ. Research Centre for Technology, Work and Culture, Graz (Austria)

    2003-07-01

    In this paper we will pose the question whether a higher level of user participation may improve the development and dissemination of energy-efficient technologies. We will especially focus on user-led innovation processes with a high involvement of individual end-users. In our argument we will draw on several case studies in the field of renewable energy technologies - in particular solar collectors and biomass heating systems - and sustainable building technologies. Users in these case studies were involved in the design or planning processes, sometimes in a very selective way and with limited influence, sometimes very active and for quite a long period of time. Especially in the case of renewable energy technologies self-building groups were highly successful and resulted in improved and widely disseminated technologies. Based on the empirical results of our case studies we will critically discuss the potential of user involvement for energy efficiency, and various forms of user participation and involvement as a strategy to change consumption patterns of end-users in general. Special emphasis will be put on technological and social pre-conditions which might allow the transfer of our examples from renewable energies to potentially energy efficient technologies.

  14. Definition and preparation of glassy matrices by innovating processes to confine radioactive wastes and industrial toxic materials

    International Nuclear Information System (INIS)

    Moncouyoux, J.P.

    1995-01-01

    The confinement by vitrification of high-level radioactive wastes is studied in the CEA for fifteen years. These studies have lead to the preparation of glassy matrices by innovating processes. These processes can be applied to non-radioactive toxic materials treatment too. In this work are more particularly described the glassy matrix long-dated behaviour and the different vitrification processes used (by direct induction in cold crucible, by transferred arc plasma). (O.L.). 1 tab

  15. Technological innovation and convergent journalism. Case study on the transformation process of Bavaria’s public broadcasting service

    Directory of Open Access Journals (Sweden)

    Klaus MEIER

    2017-01-01

    Full Text Available As a consequence of technological innovations and their social utilisation, media organisations and newsrooms are undergoing a fundamental transformation process. This article analyses the interrelations between technological innovations and the challenges of convergent journalism. Studies conducted on newsroom convergence to date set out from one-sided influences: They investigated the extent to which technical innovations determine the newsrooms, or whether journalistic structures and long-range trends are so strong as to largely obstruct the adoption of new technologies in journalism. Therefore technology — especially in studies carried out on newsroom convergence — is considered as an influencing factor on somehow resisting or non-resisting newsrooms. We broaden the scope of this investigation by considering that any such influence might not come exclusively from technology, but that impulses can come also from innovative newsrooms: technological gaps, wishes and obstacles are identified from the journalist's viewpoint and brought to the attention of the developers of newsroom technologies — on the basis of empirical research findings from a case study of Bavaria’s public broadcasting service, Bayerischer Rundfunk (BR. With its 5.000 employees, BR is one of Germany's largest media organisations. It is undergoing a fundamental and long-term convergence process. A variety of gaps, problems and wishes came to light from 25 in-depth interviews with journalists working on innovative projects. For example, criticism is expressed of complicated, partly unknown or non-existent networking of cross-media production systems. There is a desire for the increased use of consumer devices like smartphones in professional news production. There exists a creative potential for innovative solutions, but these are not comprehensively evaluated. To date, there has been no systematic implementation of the findings of innovative media projects in everyday

  16. Innovating Technological Process for Expanding the Service Life of Underground Power Cables

    Directory of Open Access Journals (Sweden)

    Tabacaru V.

    2016-08-01

    Full Text Available As a public power distribution operator on low voltage (023/0.4 kV, medium voltage (6 and 20 kV, and high voltage (110 kV in the territory of Galati County, SDEE Galati serves approximately 240,000 consumers (captive and eligible, domestic and non-domestic For this purpose, in the field of medium voltage underground distribution lines, SDEE Galati manages and operates a volume of approx. 500 km UDL/6kV circuit and approximately 630 km UDL/20 kV circuit. Many of these cables which are still in operation, were manufactured with materials and on the technological level of the ’60s,’70s and ‘80s decades and have reached the end of their service life. Evidence does and incident statistics from these networks in which, every year, one of the "tips" is the medium voltage cables damaged "technical wear" normal operating conditions. The current paper will present the main features of an innovating technological process called SPR (Sustained Pressure Rejuvenation, designed for on-site refurbishing of underground power cable insulation medium and high voltage. The process offers a viable alternative that has proven, over the 25 years of application initially on the American content and now on the worldwide, substantially more cost effective than replacing cables. The paper does not propose detailed presentation of the technological process, but to inform the family of energetics NPS about the existence and the benefits of applying this new technological process to the old cable medium and high voltage.

  17. The Role of University Partners in the Innovation Adoption Process to Rice Seed Farmers in Aceh Province

    Directory of Open Access Journals (Sweden)

    Setia Budi

    2018-04-01

    Full Text Available The role of university partners in the innovation adoption process in the implementation of agricultural extension is very necessary to get attention to realize the success of empowering rice seed farmers. The purpose of this research is (1 to know the role of universities in the process of adopting innovation in IPB 3S seedling in Aceh Province, (2 to know the perception of farmers toward the characteristics of the innovation of IPB 3S varieties, and (3 to know the role of universities in the implementation process of extension agriculture to rice seed farmers. This research uses qualitative descriptive approach with data measurement using Likert scale. The results showed that in general the universities play significant role in innovation adoption process to rice seed farmers. The role is arranged by sequence; (1 implementing cultivation skill (2 strengthening farmer institution, (3 liaison with the government (4 guidance of transfer of technology, and (5 liaison with production market. Farmers perception on the characteristics of innovation optimum production technology package (IPB-Prima IPB 3S (1 has a relative profitability, (2 easy to try, (3 conformity, (4 observable, and (5 innovation subtly level. The role of partners in the implementation of agricultural extension in sequence (1 conformity of extension materials, (2 intensity of extension, (3 appropriateness of extension method and (4 accuracy of media usage. The university should pay attention on the mechanism of facilitating technology transfer with the use of media and appropriate extension methods to rice seed farmers. The university also should build good communication with private organizations to help farmers in terms of seed price certainty produced by rice seed farmers in Aceh Province, Indonesia.

  18. Linking Innovation and Entrepreneurship – Literature Overview and the Introduction of a process-oriented Framework

    DEFF Research Database (Denmark)

    Brem, Alexander

    2011-01-01

    The terms innovation and entrepreneurship are commonly used – but not always with the same understanding. There is an obvious strong relationship of both areas, however, barely articulated. Moreover, so far there is few consensus among researchers regarding innovative and entrepreneurial activiti...... for future considerations is introduced....

  19. The VET System and Industrial SMEs: The Role of Employees with VET Qualifications in Innovation Processes

    Science.gov (United States)

    Brunet Icart, Ignasi; Rodríguez-Soler, Joan

    2017-01-01

    Reforms of the vocational education and training (VET) system in Spain are committed to a closer relationship between the VET system and companies' needs. One of these needs is for a greater contribution of the VET system to innovation in companies, especially SMEs, which have limited resources to innovate. This contribution could materialise…

  20. Comparing private label and manufacturer brand innovation projects in a Dutch food processing company

    NARCIS (Netherlands)

    Omta, S.W.F.; Fortuin, F.T.J.M.

    2014-01-01

    The time when private labels consisted only of low-priced, low-quality products has long gone. A new type of cooperative innovation project has emerged in which food processors and retailers work closely together to target consumers with new and innovative products. These so-called high-end private

  1. Investigating the Influence of Technology Inflows on Technology Outflows in Open Innovation Processes : A Longitudinal Analysis

    NARCIS (Netherlands)

    Sikimic, U.; Chiesa, V.; Frattini, F.; Scalera, V.G.

    2016-01-01

    The open innovation (OI) paradigm emphasizes the importance of integrating inbound and outbound flows of technology to increase a firm's innovation performance. While the synergies between technology inflows and outflows have been discussed in conceptual OI articles, the majority of empirical

  2. Framing Innovation

    DEFF Research Database (Denmark)

    Haase, Louise Møller; Laursen, Linda Nhu

    2017-01-01

    Designing a remarkable product innovation is a difficult challenge, which businesses today continuously are striving to tackle. This challenge is particularly present in the early phase of innovation, where the main product concept and frames of the innovation is determined. As a main challenge...... in the early phase is the reasoning process; innovation team are faced with open-ended ill-defines problems, where they need to make decisions about an unknown future having only incomplete, ambiguous and contradicting insights available. We study the reasoning of experts, how they frame to make sense of all...... the insights and create a basis for decision making in relation to a new project. Based on case studies of five innovative products from various industries, we suggest a Product Reasoning Model for understanding reasoning and envisioning of new product innovations in the early phases...

  3. Musical-Pedagogical Conditions of Preparation of Teachers for the Implementation of Innovative Process at Modern School

    Science.gov (United States)

    Kovalev, Dmitry A.; Khussainova, Gulzada A.; Balagazova, Svetlana T.; Tamarasar, Zhankul

    2016-01-01

    This article considers improvement of public morale, raising the emotional and aesthetic culture of young people, their patriotic feelings by providing the musical-pedagogical conditions of training future teachers for the implementation of innovative processes in modern school. The world science would benefit from using the Kazakh musical…

  4. Decision-Making Processes of SME in Cloud Computing Adoption to Create Disruptive Innovation: Mediating Effect of Collaboration

    Science.gov (United States)

    Sonthiprasat, Rattanawadee

    2014-01-01

    THE PROBLEM. The purpose of this quantitative correlation study was to assess the relationship between different Cloud service levels of effective business innovation for SMEs. In addition, the new knowledge gained from the benefits of Cloud adoption with knowledge sharing would enhance the decision making process for businesses to consider the…

  5. Unpacking policy processes for addressing systemic problems in technological innovation systems : The case of offshore wind in Germany

    NARCIS (Netherlands)

    Reichardt, Kristin; Rogge, Karoline S.; Negro, Simona O.

    2017-01-01

    While empirical studies on technological innovation systems (TIS) usually focus on policy instruments and their suitability for curing identified weaknesses of such emerging systems, the underlying policy processes and their effects have been largely disregarded. We address this gap by exploring the

  6. Meat Processing Company Staff as Innovation Intermediaries: Developing a Framework from New Zealand's Red Meat Sector

    Science.gov (United States)

    Westbrooke, Victoria; Guenther, Meike; Bewsell, Denise; Greer, Glen

    2018-01-01

    Purpose: Meat processing companies have the potential to raise farm and sector productivity by directly working with farmers. This study assesses how commercial companies can undertake the roles of innovation intermediaries to increase productivity in New Zealand's sheep and beef sector. Design/methodology/approach: This study uses a case study…

  7. Mapping Visual Negotiations in Innovation Driven Teams: A Peek into the Design Process Culture of Graduate Engineering Students

    Science.gov (United States)

    Miranda Mendoza, Constanza Sofia

    2013-01-01

    Today, the boundaries of disciplines are in a state of flux. The borders are blurred and innovations occur due to the joining of different disciplinary tribes and interaction of teams with diverse epistemological backgrounds. It is not news that this increased diversity in using the design process can bring friction and clashes due to disparate…

  8. Role of University-Industry-Government Linkages in the Innovation Processes of a Small Catching-Up Economy

    Science.gov (United States)

    Varblane, Urmas; Mets, Tonis; Ukrainski, Kadri

    2008-01-01

    During the transformation process from a command economy, the extraordinary statist university-industry-government (UIG) linkages model was replaced by an extreme version of laissez-faire relationships. A more modern interaction-based UIG model could be implemented only by changing the whole national innovation system of catching-up economies. The…

  9. Exotic Optical Fibers and Glasses: Innovative Material Processing Opportunities in Earth's Orbit.

    Science.gov (United States)

    Cozmuta, Ioana; Rasky, Daniel J

    2017-09-01

    Exotic optical fibers and glasses are the platform material for photonics applications, primarily due to their superior signal transmission (speed, low attenuation), with extending bandwidth deep into the infrared, exceeding that of silica fibers. Gravitational effects (convection sedimentation) have a direct impact on the phase diagram of these materials and influence melting properties, crystallization temperatures, and viscosity of the elemental mix during the manufacturing process. Such factors constitute limits to the yield, transmission quality, and strength and value of these fibers; they also constrain the range of applications. Manufacturing in a gravity-free environment such as the Earth's Orbit also helps with other aspects of the fabrication process (i.e., improved form factor of the manufacturing unit, sustainability). In this article, revolutionary developments in the field of photonics over the past decade merge with the paradigm shift in the privatization of government-owned capabilities supporting a more diverse infrastructure (parabolic, suborbital, orbital), reduced price, and increased frequency to access space and the microgravity environment. With the increased dependence on data (demand, bandwidth, efficiency), space and the microgravity environment provide opportunities for optimized performance of these exotic optical fibers and glasses underlying the development of enabling technologies to meet future data demand. Existing terrestrial markets (Internet, telecommunications, market transactions) and emerging space markets (on-orbit satellite servicing, space manufacturing, space resources, space communications, etc.) seem to converge, and this innovative material processing opportunity of exotic optical fibers and glasses might just be that "killer app": technologically competitive, economically viable, and with the ability to close the business case.

  10. An inquiry on managers use of decision-making tools in the core front end of the innovation process

    DEFF Research Database (Denmark)

    Appio, Francesco P.; Achiche, Sofiane; McAloone, Tim C.

    2013-01-01

    This paper focuses on the Core Front End (CFE) activities of the innovation process to say, Opportunity Identification and Opportunity Analysis. In the CFE of innovation, several tools are used to facilitate and optimise decisions. To select them, managers of the product development team have...... is chosen and how those tools impact specific performance metrics. From the analyses and hypotheses testing performed, it clearly emerges that there is no link between being aware of basic requirements (inputs/outputs) to appropriately use a certain tool and dimensions such as tools’ effectiveness...

  11. AVARIS. An innovative process to repair seal seat surfaces in gate and check valves

    International Nuclear Information System (INIS)

    Herzing, Karl-Heinz; Breitenberger, Ulf; Grieser, Armin

    2011-01-01

    AREVA Valve Repair in situ - AVARIS in short - is an innovative process for valve repair developed by AREVA. Its main benefit is that valves no longer need to be cut out but can be machined in situ, i.e. within the piping system. AVARIS saves the plant operators time and money, as complete exchanges of valves and the ensuing complex measures become dispensable. AVARIS is of high interest in the worldwide maintenance market, as it can be applied in both nuclear and conventional power plants. Moreover, AVARIS retrofits valves in the secondary and primary circuit which even saves complex nuclear transports. AVARIS fulfills the quality requirements of 3. party authorities in national and international markets. Valves repaired with AVARIS correspond to their original condition with regard to the sealing function. The successful first application on 2 gate valves in a German nuclear power plant proves that this repair technology is very reliable and flexible. Follow-up orders for AVARIS will be realized in several nuclear power plants in 2011. (orig.)

  12. GOODBYE TO PAPER, HIGHLIGHTERS, SCISSORS AND GLUE: INNOVATING THE CONTENT ANALYSIS PROCESS THROUGH ATLAS.TI

    Directory of Open Access Journals (Sweden)

    Silvana Anita Walter

    2015-06-01

    Full Text Available Atlas.ti software comprises a tool for the analysis of qualitative data that can facilitate its management and interpretation. However, the use of this software has been much less frequent in strategy, despite the increasing use of content analysis in this area.This study aimed to demonstrate, through an example, the applicability of Atlas.ti software in conducting thematic content analysis in the strategy area. The example used was a survey conducted on two accounting firms in Curitiba, Paraná (PR, and applied to the firm’s directors, as a data collection instrument, through semi-structured interviews. With the help of Atlas.ti 5.0 software, thematic content analysis was undertaken and brought to light that the two offices have a similar trajectory; they are characterized as family members; they hold or held centralization of power; made innovations; do not have formalized plans; and, most of their strategies are emerging. The example used allowed for the demonstration of: the encoding process; the writing of research notes and comments; the establishment of relationships between the elements analyzed; and, the grouping and management of such elements. It is hoped that this study contributes to stimulating the use of Atlas.ti software and assists in improving the consistency and betterment of qualitative research through the ease of empirical verification.

  13. Designing collaborative policy innovation

    DEFF Research Database (Denmark)

    Agger, Annika; Sørensen, Eva

    2014-01-01

    Recent approaches to enhancing public innovation suffer from two shortcomings: They overemphasize competition as a driver of innovation and overlook the fact that public sector innovation involves policy innovation as well as service innovation. Drawing on governance research and innovation theory......, the chapter investigates the extent to which and how collaboration between politicians and relevant stakeholders can spur the formulation, implementation and diffusion of new innovative policies. A case study of a process of collaborative policy innovation in a Danish municipality shows that collaborative...... policy arenas do contribute to policy innovation but also that the degree to which they do so depends on the institutional design of these arenas....

  14. Virtual reality, telemedicine, web and data processing innovations in medical and psychiatric education and clinical care.

    Science.gov (United States)

    Hilty, Donald M; Alverson, Dale C; Alpert, Jonathan E; Tong, Lowell; Sagduyu, Kemal; Boland, Robert J; Mostaghimi, Arash; Leamon, Martin L; Fidler, Don; Yellowlees, Peter M

    2006-01-01

    This article highlights technology innovations in psychiatric and medical education, including applications from other fields. The authors review the literature and poll educators and informatics faculty for novel programs relevant to psychiatric education. The introduction of new technologies requires skill at implementation and evaluation to assess the pros and cons. There is a significant body of literature regarding virtual reality and simulation, including assessment of outcomes, but other innovations are not well studied. Innovations, like other uses of technology, require collaboration between parties and integration within the educational framework of an institution.

  15. Innovative CO{sub 2} separation process for biogas upgrading using polymeric resins; Innovatives CO{sub 2}-Abscheideverfahren zur Biogasaufbereitung mit Hilfe von Polymerharzen

    Energy Technology Data Exchange (ETDEWEB)

    Harrivelle, Carole; Safai, Daniel; Raab, Katharina; Klein, Barbara [Stuttgart Univ. (Germany). Abt. Brennstoffe und Rauchgasreinigung; Scheffknecht, Guenter

    2016-08-01

    Upgraded biogas can be injected into the natural gas grid. The Institute of Combustion and Power Plant Technology (IFK) is investigating several innovative biogas upgrading processes with the aim to develop treatment methods adapted for small biogas plants. This paper presents a process to separate CO{sub 2} from CH{sub 4} by concentration swig adsorption using an amine functionalized polymer resin. The experiments were carried out at a continuous laboratory scale plant. The results are compared with previous experiments from earlier work at the IFK. The new resin shows a significant increase of working capacity and CH{sub 4} purity as well as a decrease of CH{sub 4} loss.

  16. Energy and Resource Saving of Steelmaking Process: Utilization of Innovative Multi-phase Flux During Dephosphorization Process

    Science.gov (United States)

    Matsuura, Hiroyuki; Hamano, Tasuku; Zhong, Ming; Gao, Xu; Yang, Xiao; Tsukihashi, Fumitaka

    2014-09-01

    An increase in the utilization efficiency of CaO, one of the major fluxing agents used in various steelmaking processes, is required to reduce the amount of discharged slag and energy consumption of the process. The authors have intensively focused on the development of innovative dephosphorization process by using so called "multi-phase flux" composed of solid and liquid phases. This article summarizes the research on the above topic done by the authors, in which the formation mechanisms of P2O5-containing phase during CaO or 2CaO·SiO2 dissolution into molten slag, the phase relationship between solid and liquid phases at equilibrium, and thermodynamic properties of P2O5-containing phase have been clarified. The reactions between solid CaO or 2CaO·SiO2 and molten CaO-FeO x -SiO2-P2O5 slag were observed by dipping solid specimen in the synthesized slag at 1573 K or 1673 K. The formation of the CaO-FeO layer and dual-phase layer of solid 2CaO·SiO2 and FeO x -rich liquid phase was observed around the interface from the solid CaO side toward the bulk slag phase side. Condensation of P2O5 into 2CaO·SiO2 phase as 2CaO·SiO2-3CaO·P2O5 solid solution was observed in both cases of CaO and 2CaO·SiO2 as solid specimens. Measurement of the phase relationship for the CaO-FeO x -SiO2-P2O5 system confirmed the condensation of P2O5 in solid phase at low oxygen partial pressure. The thermodynamics of 2CaO·SiO2-3CaO·P2O5 solid solution are to be clarified to quantitatively simulate the dephosphorization process, and the current results are also introduced. Based on the above results, the reduction of CaO consumption, the discharged slag curtailment, and energy-saving effects have been discussed.

  17. The Structure of Artefacts of Management Control in the Innovation Process: Does Exist Association with the Strategic Profile?

    Directory of Open Access Journals (Sweden)

    Fábio Frezatti

    2015-01-01

    Full Text Available This study investigates what is the role of strateg ic profiles and management control instruments in organisations’ innovation process. B ased in a survey using structural equation modelling (121 companies, we confirm that analyser , defender e prospector profiles are associated with strategic planning, balanced scorec ard (BSC and rolling forecast. The reactor type is associated with lower use of artefacts. Our results confirm the linkage between incremental innovation and strategic planning and b etween radical innovation and BSC. These findings reflect the alignment between strate gic types, the availability of instruments and intensity of innovation, which is useful inform ation with which to understand organisations and their market activities. This pap er bring information about specific management control instruments existence and the im pact for the intensity of the innovation that is relevant for management and must stimulate organizations to be consistent in the cases that the strategic profile is a clear long term def inition or see the possibility of change when it is not the desired one.

  18. The Positions of Virtual Knowledge Brokers in the Core Process of Open Innovation

    NARCIS (Netherlands)

    Hacievliyagil, N.K.; Maisonneuve, Y.E.; Auger, J.F.; Hartmann, L.

    2007-01-01

    Several companies are implementing the strategy of open innovation in their research and development operations. They become more dependent, therefore, on their capabilities to exchange knowledge and technology with external parties. To facilitate these exchanges, virtual knowledge brokers use

  19. Approaches to Innovation Process Assessment: Complex Results from an Exploratory Investigation

    Directory of Open Access Journals (Sweden)

    Ondrej Zizlavsky

    2015-12-01

    companies is noted. Therefore, this paper is supposed to motivate researchers to conduct more large-scale studies in the area of innovative performance measurement systems and their implementation in different business sectors and areas.

  20. BAYESIAN APPROACH TO THE PROCESS OF IDENTIFICATION OF THE DETERMINANTS OF INNOVATIVENESS

    Directory of Open Access Journals (Sweden)

    Marta Czyżewska

    2014-08-01

    Full Text Available Bayesian belief networks are applied in determining the most important factors of the innovativeness level of national economies. The paper is divided into two parts. The first presentsthe basic theory of Bayesian networks whereas in the second, the belief networks have been generated by an inhouse developed computer system called BeliefSEEKER which was implemented to generate the determinants influencing the innovativeness level of national economies.Qualitative analysis of the generated belief networks provided a way to define a set of the most important dimensions influencing the innovativeness level of economies and then the indicators that form these dimensions. It has been proven that Bayesian networks are very effective methods for multidimensional analysis and forming conclusions and recommendations regarding the strength of each innovative determinant influencing the overall performance of a country’s economy.

  1. Innovative processes impact on the factors optimal number formation of the enterprise location

    OpenAIRE

    Franiv Ihor Andriiovych

    2014-01-01

    The aim of the article. Determination of the factors to locate enterprises for searching optimal location place, therefore grounding enterprise location place with one or several factors one should consider innovative development nowadays. The results of the analysis. The branches referring to this or that production group will always have relative character and will concern time period, because – various factors value can be changed under influence of innovation introduction. Technologica...

  2. Crosscutting Issues in International Transformation: Interactions and Innovations among People, Organizations, Processes, and Technology

    Science.gov (United States)

    2009-12-01

    launching torpedoes. This innovation is portrayed in the movement from point C1 to C2 along the dotted green line in figure 4. Eventually...dotted green line in figure 4. The innovation involved in the development of the tactical architecture for carrier warfare is portrayed in figures 8...closely to the stages of development identified by other development psychologists, including Kegan (1994; Torbert, 1991), Alexander (Alexander

  3. Proceedings of waste stream minimization and utilization innovative concepts: An experimental technology exchange. Volume 1, Industrial solid waste processing municipal waste reduction/recycling

    Energy Technology Data Exchange (ETDEWEB)

    Lee, V.E. [ed.; Watts, R.L.

    1993-04-01

    This two-volume proceedings summarizes the results of fifteen innovations that were funded through the US Department of Energy`s Innovative Concept Program. The fifteen innovations were presented at the sixth Innovative Concepts Fair, held in Austin, Texas, on April 22--23, 1993. The concepts in this year`s fair address innovations that can substantially reduce or use waste streams. Each paper describes the need for the proposed concept, the concept being proposed, and the concept`s economics and market potential, key experimental results, and future development needs. The papers are divided into two volumes: Volume 1 addresses innovations for industrial solid waste processing and municipal waste reduction/recycling, and Volume 2 addresses industrial liquid waste processing and industrial gaseous waste processing. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  4. Evaluation of the professional process portfolio: an innovative tool to help develop and demonstrate leadership competency.

    Science.gov (United States)

    Hastings, Elisabeth S; Chacko, Mariam R; Acosta, Amy B; Hergenroeder, Albert C; Wiemann, Constance M

    2015-02-01

    The professional process portfolio (PPP) was adopted by the Maternal Child and Health Bureau (MCHB) as an 'innovation' in best practice for all Leadership in Education and Adolescent Health (LEAH) Training Programs; however it had not been formally evaluated. Thus the objective was to evaluate the utility of the PPP for graduates of the LEAH training program in terms of (1) how alumni have used, adapted, and applied it since completing fellowship, (2) what fellows learned or gained through completing it, and (3) how it can be improved for continued use in training programs. Graduates from six disciplines were asked via telephone or email to participate in a survey regarding their experience with the PPP. Descriptive statistics were generated for demographic characteristics and closed-choice questions. Responses to open-ended questions were analyzed by a team of faculty using framework analysis. Sixty-one graduates completed surveys. The majority (85%) found the PPP useful and utilized it post-graduation for multiple purposes in professional development: interviewing, training, and referencing previous work. Graduates recommended that the PPP be improved by making it electronic, discipline-specific, and providing earlier and more frequent instruction from faculty on expectations of creating it. Four themes emerged from the qualitative data analysis: accomplishment, experiential learning, skills and accountability, and a best practice of learning. The PPP was an effective personal learning tool for the majority of graduates and enhanced graduates' experiences. We highlight the ways that the PPP may facilitate the development of learning experiences associated with MCH leadership competence.

  5. Open innovations, innovation communities and firm's innovative activities

    Directory of Open Access Journals (Sweden)

    Getejanc Vesna

    2016-01-01

    Full Text Available The open innovation paradigm emphasizes the fact that firms can improve their performance by opening their business models and reduce their R&D costs by effective incorporation of external knowledge. In other words, companies are able to capture value through knowledge that exists outside the boundaries of their organization. The shift from closed to open model of innovation has imposed the necessity to adopt more open approach to innovation within traditional academic view of business strategy. The adoption of this innovative approach is emphasized even more, by the necessity for stronger connection and cooperation among the participants of the innovation process. Free will and collaboration are the main characteristics of open source software, which is recognized in literature as the role model of open innovation and is a rapidly growing method of technology development. Furthermore, innovative communities represent a great opportunity for improvement of the companies' innovation activities, since they have become an important source for identifying the needs and problems of the users. Their development has been fostered by information technologies and recent social changes in user behavior. Recognizing and better understanding the motivation of the members of the innovation communities that guide them to participate in the process of idea generation, can have significant influence on their incorporation within the innovation process. Equally important is to define the incentives that are suited for stimulating and fostering innovative user activities. Taking this topic in consideration, the purpose of this article is to address the following questions: In what way does the collaboration in open source software projects have positive effect on companies' innovation performance? What are the innovation communities and how can companies establish successful interaction with them? Why does the interaction with innovation communities lead to

  6. Innovative E/E developments with enhanced quality requirements along the process chain; Innovative E/E Entwicklungen mit hohen Qualitaetsanforderungen entlang der Prozesskette

    Energy Technology Data Exchange (ETDEWEB)

    Tappe, Robert [Audi AG, Ingolstadt (Germany)

    2010-07-01

    The proportion of electronics in motor vehicles is still steadily increasing and is constantly creating new challenges for the Technical Development departments. They must generate innovative products while the product cycles are getting shorter and shorter. The new developments, in turn, are also making great demands on the production - the construction process must be efficient, the cycle times are getting shorter and shorter and the quality standards are rising. In addition, our after-sales service staff must increasingly face the challenges of servicing vehicles from very different generations of electronics quickly and reliably while at the same time keeping the costs low for our customers. And above all this, we are all facing the challenge that we must inspire customer confidence in our products for many years and all over the world - by offering reliability, functionality and top-level design. (orig.)

  7. THE IMPORTANCE OF INNOVATION IN THE PERFORMANCE OF IPO PROCESSES THAT OCCURRED IN BRAZIL DURING THE LAST DECADE

    Directory of Open Access Journals (Sweden)

    Murilo Sampaio

    2012-01-01

    Full Text Available Innovation is a challenge sought by all economically developed societies. National systems articulate public and private resources so as to shape a more innovative society, capable of ideating and promoting processes, products and services with increasing levels of differentiation before those existing. The search for innovation and the creation of competitive advantages is even greater in the corporate environment, a microeconomic locus where innovation can be measured by efforts and results obtained. Likewise, the number of companies that seek to open themselves to the capital market with views to accumulating resources so as to sustain their strategic growth plans, increases. During the last decade, 245 companies opened their capital in Brazil but only 40% of these went to São Paulo´s Stock Exchange Market (Bovespa negotiate their shares. Upon making its Initial Public Offering (IPO the company has to expose to the stock exchange market its true situation in several areas which are ruled by the Securities and Exchange Commission (CVM. They produce extensive documentation in the form of a robust prospect that is made available to any potential investor. The prospect is known at the capital market as the source that portrays the largest amount of information concerning the company that announced their IPO. It is a legal document but, at the same time, one that in highlight contains, all the attributes and differentials that the company expects the market to evaluate. Thus, by means of secondary sources, all ground on the prospects of IPOs that took place, research was conducted to acknowledge the level of innovation each company presented at the time of their IPO and, at the same time, to measure the performance of the value of stocks that the respective IPO obtained. Subsequently a set of structured qualitative interviews posing to evaluate the results of the quantitative research, was conducted. The quantitative analysis of data collected

  8. An Analysis of the Impact of Total Quality Management on Employee Performance with mediating role of Process Innovation

    Science.gov (United States)

    Nadia Dedy, Aimie; Zakuan, Norhayati; Zaleha Omain, Siti; Rahim, Kamaruzzaman Abdul; Ariff, Mohd Shoki Md; Sulaiman, Zuraidah; Zameri Mat Saman, Muhamad

    2016-05-01

    TQM practices are important to provide customer satisfaction by improved product performance and sustained towards the organizational goal. The objective of this study was to analyse the relationship between TQM practices, process innovation and employee performance. In this study, six critical success factors of TQM have been identified namely customer focus, leadership, training, teamwork, communication, and top management. Based on thorough literature review, employee performances have been measured by two constructs which are job satisfaction and workplace environment. The study used methodology of quantitative approach. The questionnaires for this study were randomly distributed to 102 employees in the selected car manufacturer companies. The respondents were choosing from management team, supervisor, technician and others worker. Results of the study support the proposed hypotheses that there are significant relationship between TQM practices, process innovation and employee performance.

  9. Participatory Innovation

    DEFF Research Database (Denmark)

    Buur, Jacob; Matthews, Ben

    2008-01-01

    An increasing number of corporations engage with users in co-innovation of products and services. But there are a number of competing perspectives on how best to integrate these understandings into existing corporate innovation development processes. This paper maps out three of the dominant appr...... the challenges such an approach sets to innovation management, and discuss research directions we see as fundamental to the development of the field of user-driven innovation. Udgivelsesdato: September......An increasing number of corporations engage with users in co-innovation of products and services. But there are a number of competing perspectives on how best to integrate these understandings into existing corporate innovation development processes. This paper maps out three of the dominant...... approaches, compares them in terms of goals, methods and basic philosophy, and shows how they may beneficially enrich one another. We will present an industrial innovation case that has been instrumental to the development of what we have termed ‘Participatory Innovation’. Based on this we will list...

  10. A review of the demonstration of innovative solvent extraction processes for the recovery of trivalent minor actinides from PUREX raffinate

    International Nuclear Information System (INIS)

    Modolo, G.; Wilden, A.; Geist, A.; Magnusson, D.; Malmbeck, R.

    2012-01-01

    The selective partitioning (P) of long-lived minor actinides from highly active waste solutions and their transmutation (T) to short-lived or stable isotopes by nuclear reactions will reduce the long-term hazard of the high-level waste and significantly shorten the time needed to ensure their safe confinement in a repository. The present paper summarizes the on-going research activities at Forschungszentrum Juelich (FZJ), Karlsruher Institut fuer Technologie (KIT) and Institute for Transuranium Elements (ITU) in the field of actinide partitioning using innovative solvent extraction processes. European research over the last few decades, i.e. in the NEWPART, PARTNEW and EUROPART programmes, has resulted in the development of multi-cycle processes for minor actinide partitioning. These multi-cycle processes are based on the co-separation of trivalent actinides and lanthanides (e.g. by the DIAMEX process), followed by the subsequent actinide(III)/lanthanide(III) group separation in the SANEX process. The current direction of research for the development of innovative processes within the recent European ACSEPT project is discussed additionally. This paper is focused on the development of flow-sheets for recovery of americium and curium from highly active waste solutions. The flow-sheets are verified by demonstration processes, in centrifugal contactors, using synthetic or genuine fuel solutions. The feasibility of the processes is also discussed. (orig.)

  11. Analysis of E-Commerce Communication Strategy in Diffusion of Innovations Process (Case Study in Community SME Belimbing Depok)

    OpenAIRE

    Wahyuni, Feni; Sujono, Firman Kurniawan

    2017-01-01

    E-commerce business in Indonesia has developed quite rapidly by prioritizing their respective advantages. E-commerce platforms can also be categorized into online-based innovation products that can be utilized by the sellers to expand their business online. E-commerce offers a variety of convenience in the process of selling transactions. Distance is no longer a significant obstacle because all can be connected through the internet. Groups of Small Medium Enterprises (SME) should also be able...

  12. Participatory Innovation

    DEFF Research Database (Denmark)

    Buur, Jacob; Matthews, Ben

    In this paper we discuss the potential for Participatory Design (PD) to make a fundamental contribution to the business-oriented field of user-driven innovation, taking note of where we find PD can best benefit from interaction with this other field. We examine some of the challenges that must...... be addressed if PD is to contribute to innovation processes in companies. We conclude by presenting a research agenda comprising of six promising topics to shape a new discipline of Participatory Innovation....

  13. Fracture Dissolution of Carbonate Rock: An Innovative Process for Gas Storage

    Energy Technology Data Exchange (ETDEWEB)

    James W. Castle; Ronald W. Falta; David Bruce; Larry Murdoch; Scott E. Brame; Donald Brooks

    2006-10-31

    The goal of the project is to develop and assess the feasibility and economic viability of an innovative concept that may lead to commercialization of new gas-storage capacity near major markets. The investigation involves a new approach to developing underground gas storage in carbonate rock, which is present near major markets in many areas of the United States. Because of the lack of conventional gas storage and the projected growth in demand for storage capacity, many of these areas are likely to experience shortfalls in gas deliverability. Since depleted gas reservoirs and salt formations are nearly non-existent in many areas, alternatives to conventional methods of gas storage are required. The need for improved methods of gas storage, particularly for ways to meet peak demand, is increasing. Gas-market conditions are driving the need for higher deliverability and more flexibility in injection/withdrawal cycling. In order to meet these needs, the project involves an innovative approach to developing underground storage capacity by creating caverns in carbonate rock formations by acid dissolution. The basic concept of the acid-dissolution method is to drill to depth, fracture the carbonate rock layer as needed, and then create a cavern using an aqueous acid to dissolve the carbonate rock. Assessing feasibility of the acid-dissolution method included a regional geologic investigation. Data were compiled and analyzed from carbonate formations in six states: Indiana, Ohio, Kentucky, West Virginia, Pennsylvania, and New York. To analyze the requirements for creating storage volume, the following aspects of the dissolution process were examined: weight and volume of rock to be dissolved; gas storage pressure, temperature, and volume at depth; rock solubility; and acid costs. Hydrochloric acid was determined to be the best acid to use because of low cost, high acid solubility, fast reaction rates with carbonate rock, and highly soluble products (calcium chloride

  14. Product Innovation in Sustainability-Oriented New Ventures : A Process Perspective

    NARCIS (Netherlands)

    Keskin, D.

    2015-01-01

    Despite the recognition that new ventures are potential candidates of creating innovations necessary for sustainability, little is know on how they actually engage in this journey. Sustainability-oriented new ventures are confronted with high levels of uncertainty that stem from the liabilities of

  15. University Interdisciplinary Research Organizations in the Process of Collaborative Innovation: Advantages, Difficulties and Strategies

    Science.gov (United States)

    Bi Ying; Yang, Liansheng

    2015-01-01

    Under the background of collaborative innovation, interdisciplinary research organizations due to its structural advantages should actively target frontier science and the great needs of national development, key research and strategic issues of solving the country's need, prospective issues in the frontier of science and technology and major…

  16. Decision Making and Behavioral Strategy: The role of regulatory focus in corporate innovation processes

    NARCIS (Netherlands)

    I.A. Tunçdoğan (Aybars)

    2014-01-01

    markdownabstract__Abstract__ This dissertation makes use of the behavioral strategy perspective in order to examine a number of constructs pertaining to innovation in corporate settings. In particular, the dissertation consists of four studies; one conceptual and three empirical. The conceptual

  17. Reciprocal Engagement: The Process of Pedagogical Innovation among Faculty at Research Universities

    Science.gov (United States)

    Boden, Karen E.

    2012-01-01

    Research Universities: very high research activity (RU/VH) faculty often emphasize research compared with teaching or service in their work. However, some faculty still intentionally endeavor to be excellent teachers by innovating pedagogy to enhance student learning. This qualitative study focused on developing a theory to describe the process…

  18. The Public Health Innovation Model: Merging Private Sector Processes with Public Health Strengths.

    Science.gov (United States)

    Lister, Cameron; Payne, Hannah; Hanson, Carl L; Barnes, Michael D; Davis, Siena F; Manwaring, Todd

    2017-01-01

    Public health enjoyed a number of successes over the twentieth century. However, public health agencies have arguably been ill equipped to sustain these successes and address the complex threats we face today, including morbidity and mortality associated with persistent chronic diseases and emerging infectious diseases, in the context of flat funding and new and changing health care legislation. Transformational leaders, who are not afraid of taking risks to develop innovative approaches to combat present-day threats, are needed within public health agencies. We propose the Public Health Innovation Model (PHIM) as a tool for public health leaders who wish to integrate innovation into public health practice. This model merges traditional public health program planning models with innovation principles adapted from the private sector, including design thinking, seeking funding from private sector entities, and more strongly emphasizing program outcomes. We also discuss principles that leaders should consider adopting when transitioning to the PHIM, including cross-collaboration, community buy-in, human-centered assessment, autonomy and creativity, rapid experimentation and prototyping, and accountability to outcomes.

  19. Learning in product innovation processes. Managerial action on improving learning behaviour

    NARCIS (Netherlands)

    Gieskes, J.F.B.

    2001-01-01

    Learning in and by organisations has been of great interest to practitioners and academics for a number of years now. However, publications on empirical research are few, especially in the context of product innovation.This thesis reports on research which was aimed at (a) effective managerial

  20. Advancing Management Innovation: Synthesizing Processes, Levels of Analysis, and Change Agents

    NARCIS (Netherlands)

    Volberda, H.W.; van den Bosch, F.; Mihalache, R.O.

    2014-01-01

    Despite the mounting evidence that innovation in management can fuel competitive advantage, we still know relatively little about how firms introduce new ways of managing. The goal of this introductory essay—and the Themed Section it introduces—is to advance this knowledge. To this end, we first

  1. Virtual Reality, Telemedicine, Web and Data Processing Innovations in Medical and Psychiatric Education and Clinical Care

    Science.gov (United States)

    Hilty, Donald M.; Alverson, Dale C.; Alpert, Jonathan E.; Tong, Lowell; Sagduyu, Kemal; Boland, Robert J.; Mostaghimi, Arash; Leamon, Martin L.; Fidler, Don; Yellowlees, Peter M.

    2006-01-01

    Objective: This article highlights technology innovations in psychiatric and medical education, including applications from other fields. Method: The authors review the literature and poll educators and informatics faculty for novel programs relevant to psychiatric education. Results: The introduction of new technologies requires skill at…

  2. Framing and interorganizational knowledge transfer: A process study of collaborative innovation in the aircraft industry

    NARCIS (Netherlands)

    van Burg, J.C.; Berends, J.J.; van Raaij, E.

    2014-01-01

    This article explains how and why organizational actors' decisions about interorganizational knowledge transfer might change over time. We find that organizational actors' framing of future innovation developments, as either an opportunity or a threat, motivates them to engage or disengage in

  3. Developmental Evaluation Framework for Innovation and Learning Networks: Integration of the Structure, Process and Outcomes

    Science.gov (United States)

    Ramstad, Elise

    2009-01-01

    Purpose: During the past decade new types of broader networks that aim to achieve widespread effects in the working life have emerged. These are typically based on an interactive innovation approach, where knowledge is created jointly together with diverse players. At the moment, the challenge is how to evaluate these complex networks and learning…

  4. The Public Health Innovation Model: Merging Private Sector Processes with Public Health Strengths

    Directory of Open Access Journals (Sweden)

    Cameron Lister

    2017-08-01

    Full Text Available Public health enjoyed a number of successes over the twentieth century. However, public health agencies have arguably been ill equipped to sustain these successes and address the complex threats we face today, including morbidity and mortality associated with persistent chronic diseases and emerging infectious diseases, in the context of flat funding and new and changing health care legislation. Transformational leaders, who are not afraid of taking risks to develop innovative approaches to combat present-day threats, are needed within public health agencies. We propose the Public Health Innovation Model (PHIM as a tool for public health leaders who wish to integrate innovation into public health practice. This model merges traditional public health program planning models with innovation principles adapted from the private sector, including design thinking, seeking funding from private sector entities, and more strongly emphasizing program outcomes. We also discuss principles that leaders should consider adopting when transitioning to the PHIM, including cross-collaboration, community buy-in, human-centered assessment, autonomy and creativity, rapid experimentation and prototyping, and accountability to outcomes.

  5. The decision-making process concerning workplace innovation : KLPD Case Study

    NARCIS (Netherlands)

    van der Voordt, Theo; Guiza, Bibiana

    2003-01-01

    This case study is one in a series on workplace innovation. This issue is alive in many companies and not for profit organizations. Since 1990 the subject has been studied by many professionals. Yet a consistent knowledge base is not in place. For that reason the Center for People and Buildings

  6. Learning to Match: User-Producer Integration and Blending in the Probiotic Gefilus Innovation Process

    Science.gov (United States)

    Janasik, Nina

    2011-01-01

    The notions of user involvement and user orientation have become popular catchphrases in innovation research and practice. Central in this research are the ideas that knowledge about users leads to better design, and that the interests of users and producers need to be aligned. In another field of research, scholars have long recognised the…

  7. How do collaboration and investments in knowledge management affect process innovation in services?

    NARCIS (Netherlands)

    Ashok, M.; Narula, R.; Martinez-Noya, A.

    2016-01-01

    Purpose: Despite the keen interest in radical and incremental innovation, few studies have tested the varying impact of firm-level factors in service sectors. This paper analyses how collaboration with existing and prospective users, and investments in knowledge management (KM) practices can be

  8. Shared communication processes within healthcare teams for rare diseases and their influence on healthcare professionals' innovative behavior and patient satisfaction

    Directory of Open Access Journals (Sweden)

    Budych Karolina

    2011-04-01

    Full Text Available Abstract Background A rare disease is a pattern of symptoms that afflicts less than five in 10,000 patients. However, as about 6,000 different rare disease patterns exist, they still have significant epidemiological relevance. We focus on rare diseases that affect multiple organs and thus demand that multidisciplinary healthcare professionals (HCPs work together. In this context, standardized healthcare processes and concepts are mainly lacking, and a deficit of knowledge induces uncertainty and ambiguity. As such, individualized solutions for each patient are needed. This necessitates an intensive level of innovative individual behavior and thus, adequate idea generation. The final implementation of new healthcare concepts requires the integration of the expertise of all healthcare team members, including that of the patients. Therefore, knowledge sharing between HCPs and shared decision making between HCPs and patients are important. The objective of this study is to assess the contribution of shared communication and decision-making processes in patient-centered healthcare teams to the generation of innovative concepts and consequently to improvements in patient satisfaction. Methods A theoretical framework covering interaction processes and explorative outcomes, and using patient satisfaction as a measure for operational performance, was developed based on healthcare management, innovation, and social science literature. This theoretical framework forms the basis for a three-phase, mixed-method study. Exploratory phase I will first involve collecting qualitative data to detect central interaction barriers within healthcare teams. The results are related back to theory, and testable hypotheses will be derived. Phase II then comprises the testing of hypotheses through a quantitative survey of patients and their HCPs in six different rare disease patterns. For each of the six diseases, the sample should comprise an average of 30 patients with

  9. Energy, economic, and environmental impacts of advanced industrial process innovations, 1976--1996

    International Nuclear Information System (INIS)

    Quinn, J.E.; Reed, J.E.

    1997-01-01

    The mission of the Office of Industrial Technologies (OIT), within the Office of Energy Efficiency and Renewable Energy, is to develop and deploy advanced energy efficiency, renewable energy, and pollution-prevention technologies, through partnerships with industry, government, and non-governmental organizations. OIT's objectives have evolved and broadened over nearly two decades, continually responding to a changing energy situation and shifting national priorities. Today, the key focus of the OIT programs is the Industries of the Future approach. This strategy of close collaboration with industry catalyzes and facilitates technology development and transfer efforts in seven manufacturing industries that together account for over 80% of the energy used and over 80% of the wastes produced by the manufacturing sector. In this approach senior level industry groups develop a future vision of their industry and a technology roadmap to attain the vision. DOE helps facilitate this process and partners with industry to identify and pursue an advanced technology R and D portfolio. The seven industries are aluminum, chemicals, forest products, glass, metalcasting, petroleum refining, and steel. In managing all its activities, OIT draws upon program support provided primarily by national Laboratories, universities, and private-sector research organizations throughout the country that have the diverse and specialized expertise needed to develop advanced industrial technologies. Approximately 78 industrial technologies developed with Office of Industrial Technology (OIT) support have successfully entered commercial markets. These technologies have saved a cumulative total of almost 900 trillion Btu, representing a new production cost savings of over $1.8 billion. These dollar savings represent the net total value of all energy saved by technologies developed with OIT support minus the net cost to industry of using the technologies (including capital costs, operating and

  10. Innovation and collective entrepreneurship

    DEFF Research Database (Denmark)

    Spear, Roger

    2012-01-01

    different perspectives on innovation and social innovation and the dynamic interaction through collective entrepreneurship in the the social and solidarity economy; bringing out process and outcome dimensions of innovation. And it will develop an understanding of the drivers and barriers to innovation...

  11. Innovating for sustainability

    DEFF Research Database (Denmark)

    The theme of the articles is innovating for sustainability. Empirically the articles shows how enterprises makes environmental innovations related to their processes and products within the organic dairy industry, the fish processing industry and the car industry.......The theme of the articles is innovating for sustainability. Empirically the articles shows how enterprises makes environmental innovations related to their processes and products within the organic dairy industry, the fish processing industry and the car industry....

  12. Development and demonstration of innovative partitioning processes (i-SANEX and 1-cycle SANEX) for actinide partitioning

    International Nuclear Information System (INIS)

    Wilden, Andreas; Modolo, Giuseppe; Geist, Andreas

    2015-01-01

    For the recovery of the trivalent actinides Am(III) and Cm(III) from PUREX raffinate, two innovative partitioning processes were developed within the European project ACSEPT. In the 'innovative-SANEX' concept, trivalent actinides (An(III)) and lanthanides (Ln(III)) are co-extracted by a TODGA-based solvent, which is then subjected to several stripping steps: selective stripping of An(III) with the hydrophilic ligand SO 3 -Ph-BTP, followed by subsequent stripping of Ln(III). A more challenging route studied also within our laboratories is the direct An(III) separation using a mixture of CyMe 4 BTBP and TODGA, the so-called '1-cycle SANEX' process. Both processes have been successfully demonstrated using spiked simulate solutions in laboratory-scale miniature annular centrifugal contactors using 32-stages flowsheets. The process development and results of the demonstration tests will be presented and discussed. Both processes showed a high recovery of An(III) with high fission-product decontamination factors. The safety of these processes is studied within the current European project SACSESS. (authors)

  13. Preliminary phase in the process of social innovation with agricultural and milk producers of Viracachá - Boyacá

    Directory of Open Access Journals (Sweden)

    Yineth Ochoa Rodríguez

    2015-06-01

    Full Text Available This project addresses the development of the preliminary stage in a process of social innovation was to build a socio-cultural and economic profile of the community involved with agricultural production and milk in the town of Viracachá, and accordingly is developing a process support, assistance and advice to those producers to build social capital that has allowed them to make an organizational strategy and a business model that articulates this local productive activity with national value chains. This paper identifies existing leadership in the group of experienced producers and associative experiences. Needs are in terms of training for partnership working and the management of rural organizations.

  14. From an Analytical Framework for Understanding the Innovation Process in Higher Education to an Emerging Research Field of Innovations in Higher Education

    Science.gov (United States)

    Cai, Yuzhuo

    2017-01-01

    While studies dealing with issues related to innovations in higher education proliferate, there has been little consensus on key concepts and central issues for research. To respond to the challenges, this paper calls for developing a new research field--studies on innovations in higher education, by integrating two disciplines, namely innovation…

  15. New Technologies and Innovation Capacity - Boosting Economic Transition Processes in the Less Favoured Regions

    OpenAIRE

    Kati-Jasmin Kosonen

    2003-01-01

    In the era of knowledge society many regions and local communities/ towns are trying to compete with larger, growing cities over the knowledge and intellectual capital resources. Regional or local knowledge environment has become more important. Building innovation capacity and the institutional capacity as one part of it could be a development tool to some lagging behind-regions, (which are called as less-favoured regions) and quite often do not have universities of their own or successful i...

  16. The Roles and Identification of Innovators and Linkers in the Technology Transfer Process.

    Science.gov (United States)

    1977-09-01

    major source from which the question was derived: ( I ) Earlier adopters are more cosmopolite than later adopters (Rogers & Shoemaker . p. 189). ~2...Earlier knowers of an innovation are more cosmopolit e than later knowers (Rogers & Shoemaker, p. 108). (3) Opinion leaders are more cosmopolite ...final conclusion is based on 13 studies. 77 percent of which favor the general statement Rogers & Shoemaker. p. 3 S . Cosmopoliteness is defined as

  17. The risk analysis during production process of an innovative baby carriage with a bike function

    Directory of Open Access Journals (Sweden)

    Nowiński Emil

    2015-12-01

    Full Text Available The article presents the risk assesment of damages occurance in production stage of a babycarriage with a bike function. The analysis of risk is done by using the FMEA – Failure Made and Effect Analysis that is used in aviation and automotive industry. This way of innovative product assessment allows to evaluate the risk of defects and indicate the priorities of quality for key parts as well as the device.

  18. From passive to active about solar electricity: innovation decision process and photovoltaic interest generation

    International Nuclear Information System (INIS)

    Kaplan, A.W.

    1999-01-01

    Electric utility managers are accustomed to technology choices, both in day-to-day load dispatching decisions and in the selection of new innovation to support utility operations. Conventional innovation management decision models may no longer apply in a confusing world of resource scarcity and industry deregulation. This research addresses the implications of a likely scenario: utilities will inevitably shift to a renewable base for electricity generation. How will managers become interested in solar energy? Does the conventional adoption decision model provide a solid foundation for understanding the factors that influence their interest? This study suggests not. Building on a national survey of utility managers in the US, a path analysis demonstrates the inadequacy of technical knowledge as a sufficient precursor to adoption interest. Three additional variables - motivation, experience, and familiarity - are offered as critical influences of interest in photovoltaics, the most ready innovation in the spectrum of renewable technologies. These findings have significant implications for commercialization efforts, as well as for management of utility operations. Through small wins, experimentation, and groping along, solar power can be diffused far more effectively and with far greater ultimate success than is expected through the conventional wisdom of large-scale research and development. (author)

  19. Diffusion process of innovation learning system the rice wheat production system of the punjab

    International Nuclear Information System (INIS)

    Taj, S.; Akmal, N.; Sharif, M.; Mahmood, A.

    2009-01-01

    A number of technological packages are introduced overtime to achieve sustainable productivity but their adoption is very low. The reason behind this is that majority of farmers still using conventional methods result in low productivity of crops. There are many ways of innovation spread including including formal and informal mechanisms by which specific community (i.e. farmers) accesses knowledge. Therefore there is a need to continuously assess the existing dissemination mechanism for new new agricultural techniques to get the optimum benefit of the new innovations in knowledge for enhancing agricultural productivity through utilization of latest knowledge generated by the national research system. The present study is an effort to identify the prevailing agricultural innovations learning system in the Rice-Wheat area of the Punjab. A rigorous survey and analytical procedures were used to identify how the end users are learning knowledge about new agricultural technologies. It was found that irrespective of gender type, the friends and relatives, fellow/progressive farmers and radio/television are three major sources of obtaining information. The farmers' visits/contact with fellow farmers and input dealers was found relatively stronger than other information sources. (author)

  20. Sequential method for the assessment of innovations in computer assisted industrial processes; Metodo secuencial para evaluacion de innovaciones en procesos industriales asistido por computadora

    Energy Technology Data Exchange (ETDEWEB)

    Suarez Antola, R [Universidad Catolica del Uruguay, Montevideo (Uruguay); Artucio, G [Ministerio de Industria Energia y Mineria. Direccion Nacional de Tecnologia Nuclear, Montevideo (Uruguay)

    1995-08-01

    A sequential method for the assessment of innovations in industrial processes is proposed, using suitable combinations of mathematical modelling and numerical simulation of dynamics. Some advantages and limitations of the proposed method are discussed. tabs.

  1. Participatory innovation process for testing new practices for soil fertility management in Chókwè Irrigation Scheme (Mozambique)

    Science.gov (United States)

    Sánchez Reparaz, Maite; de Vente, Joris; Famba, Sebastiao; Rougier, Jean-Emmanuel; Ángel Sánchez-Monedero, Miguel; Barberá, Gonzalo G.

    2015-04-01

    Integrated water and nutrient management are key factors to increase productivity and to reduce the yield gap in irrigated systems in Sub-Saharan Africa. These two elements are affected by an ensemble of abiotic, biotic, management and socio-economic factors that need to be taken into account to reduce the yield gap, as well as farmers' perceptions and knowledge. In the framework of the project European Union and African Union cooperative research to increase Food production in irrigated farming systems in Africa (EAU4Food project) we are carrying out a participatory innovation process in Chókwè irrigation scheme (Mozambique) based on stakeholders engagement, to test new practices for soil fertility management that can increase yields reducing costs. Through a method combining interviews with three farmers' associations and other relevant stakeholders and soil sampling from the interviewed farmers' plots with the organization of Communities of Practices, we tried to capture how soil fertility is managed by farmers, the constraints they find as well as their perceptions about soil resources. This information was the basis to design and conduct a participatory innovation process where compost made with rice straw and manure is being tested by a farmers' association. Most important limitations of the method are also evaluated. Our results show that socio-economic characteristics of farmers condition how they manage soil fertility and their perceptions. The difficulties they face to adopt new practices for soil fertility management, mainly related to economic resources limitations, labour availability, knowledge time or farm structure, require a systemic understanding that takes into account abiotic, biotic, management and socio-economic factors and their implication as active stakeholders in all phases of the innovation process.

  2. An ISM Based Approach for Product Innovation Using a Synthesized Process

    Directory of Open Access Journals (Sweden)

    Ming-Tang Wang

    2014-01-01

    Full Text Available Internet shopping has become a global business activity; it also increases the workload of delivery services. The Transnet logistics can easily deliver and collect cargos from everywhere, with difficulty of having the greatest efficiency. This study is composed of four parts; the first step of identifies opportunities in which proposing an auxiliary vehicle for Transnet truck to support service in narrow or crowded road. A weight calculation system determined the relative value of different items and applied the interpretive structural model (ISM to modularize SET for constructing innovation from integrated new product development (iNPD. From finding GAPs in opportunities of search results are explored an innovative light electric carrier as an auxiliary vehicle is determined. The second part consists of quantifying 21 items based upon 7 specific attributes for user orientation. The third part describes a new kind of light electric vehicle which is developed and mounted on the rear side of transport trucks; it can be used to deliver goods along narrow roads. Finally, more specific details of a collapsible electric motor carrier with a battery that is recharged using truck’s power system after using it are presented. The results of this study establish a research and product design to help Transnet drivers by improving carrying efficiency in narrow and crowded roads.

  3. Playing a 3-Stringed Violin: Innovation via the Joint Evolution of People, Process, and Knowledge Management System

    Science.gov (United States)

    Cooper, Lynne P.

    2010-01-01

    Users continuously evaluate the value and performance of their Knowledge Management Systems (KMS). As suggested by a punctuated socio-technical system process model, today's success can quickly become tomorrow's failure should the KMS fail to meet evolving needs and expectations. The more deeply a tool is embedded in the actual work process, the more vulnerable it is to emergent changes and perturbations. This paper uses the metaphor of a "3-stringed violin" to explore how differing levels of user knowledge about tools and processes can lead to system perturbations and how the active involvement of other actors can dampen the impact of perturbations, i.e., help the system survive the operational equivalent of a broken string. Recommendations suggest ways to increase system resiliency and contribute to incremental innovation.

  4. Detecting Social Innovation agency

    DEFF Research Database (Denmark)

    Pel, Bonno; Dorland, Jens; Wittmayer, Julia

    2017-01-01

    Considering that it is important for the social innovation research field to confront its methodological challenges, this contribution addresses the challenge of choosing appropriate units of analysis. In processes of transformative social innovation, the agency is distributed and therefore...

  5. Management Innovation Capabilities

    DEFF Research Database (Denmark)

    Harder, Mie

    Management innovation is the implementation of a new management practice, process, technique or structure that significantly alters the way the work of management is performed. This paper presents a typology categorizing management innovation along two dimensions; radicalness and complexity. Then...

  6. The Methodical Bases of Assessment of Innovation Processes in the Sphere of Power Generation with Use of Opportunities of Cognitive Modeling

    Directory of Open Access Journals (Sweden)

    Vikhlyaeva Nataliya V.

    2017-10-01

    Full Text Available The article presents the methodical bases of assessing the innovation processes of power generating companies with use of opportunities of cognitive modeling. It is specified that the method of cognitive modeling allows to remove contradictions concerning the interrelationship of the factors determining the innovation processes of the energy generating companies that usually arise when the results of research on the elements of the innovation system are being coordinated. Based on the arguments and practical examples, provided in the article, it was concluded that application of the method of cognitive modeling in the process of assessing the innovative capabilities of energy-generating companies is a sufficiently flexible and effective tool for supporting decision-making on strategic directions of their development.

  7. Strategy of technical innovation

    International Nuclear Information System (INIS)

    Lee, Ga Jong

    1990-12-01

    This book deals with policy of scientific technique and technical innovation such as research for development and types of technical innovation, historical development and process of technical innovation, economic growth, technology change and investment for research and development, structure and form of technical transfer with the meaning process, from, structure and theory, economic growth and investment of research and development with experiential analysis and case study on strategy of technical innovation in electron and fine chemical industry.

  8. The process of construction of evidence: An analysis of the use of indicators in two decisions of innovation policy

    Energy Technology Data Exchange (ETDEWEB)

    Boavida, N.; Moniz, A.; Laranja, M.

    2016-07-01

    Despite increasing calls for evidence-based policies, knowledge about the practical use of evidences remains limited. This paper studies the process of construction of evidences in decisions of innovation policy to understand how evidences were used. It analysis the use of indicators and other evidences through interviews conducted to inquire about the two decisions: an electric mobility policy and a nanotechnology laboratory. Results show indicators and other evidences were brought to decision processes according to their availability and capacity to support the different interests of the actors and the stakeholders. Their role was influenced by the particular situation of the decision makers. More importantly, the use of persuasive analytical evidences appears to be related with the adversity of the policy context. In addition, research suggests that indicators are one tool among others to foster innovation decisions. In fact, the relatively minor instrumental role of indicators suggests that indicators are mostly a complementary instrument of decision. When used relevantly, indicators can offer support to a decision. But there are other significant influences that need to be taken into account to understand the specific role indicators and other evidences play, such as the social relations of the decision makers and their emotional-intuitive decisions. (Author)

  9. Co-Innovation : motivators and inhibitors for customers to participate in online co-creation processes

    NARCIS (Netherlands)

    Constantinides, Efthymios; Wittenberg, Katharina; Lorenzo Romero, Carlota

    2014-01-01

    This study is concerned with identifying the motivators and deterrents of consumers to participate in co-creation processes. Co-creation processes are activities by firms to include consumers in the product development process in order to achieve a higher value through a better fit between need and

  10. Innovation in the processes of formation and training of nuclear professionals; La innovacion en los procesos de formacion y entranamiento de los profesionales nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Ruiz Martinez, F. J.; Lambistos Agustin, A.

    2015-07-01

    Innovation is the intoduction of new products and services, new processes, new sources of supply and changes in industrial organization, and continuous customer, consumer or user oriented (J. A. Schumpeter). According to this idea, three mental restrictions usually apply to the innovative break: not only are new products, not only are technological developments, not only are revolutionary ideas so also. From the innovative tradition of Tecnatom Formacion Nuclear materailized in examples like the SGI or Human Factors simulators, in recent years has made considerable progress in the function with innovative solutions to improve the results of nuclear power plants, made available to our customers, as significant as the Training Programs for Shift Supervisors, the OJT/TPE processes, seminars Diagnostic Techniques, EDMG Simulator or ROI and ROIF projects. (Author)

  11. An innovative scintillation process for correcting, cooling, and reducing the randomness of waveforms

    International Nuclear Information System (INIS)

    Shen, J.

    1991-01-01

    Research activities were concentrated on an innovative scintillation technique for high-energy collider detection. Heretofore, scintillation waveform data of high- energy physics events have been problematically random. This paper represents a bottleneck of data flow for the next generation of detectors for proton colliders like SSC or LHC. Prevailing problems to resolve were: additional time walk and jitter resulting from the random hitting positions of particles, increased walk and jitter caused by scintillation photon propagation dispersions, and quantum fluctuations of luminescence. However, these were manageable when the different aspects of randomness had been clarified in increased detail. For this purpose, these three were defined as pseudorandomness, quasi-randomness, and real randomness, respectively. A unique scintillation counter incorporating long scintillators with light guides, a drift chamber, and fast discriminators plus integrators was employed to resolve problems of correcting time walk and reducing the additional jitter by establishing an analytical waveform description of V(t,z) for a measured (z). Resolving problem was accomplished by reducing jitter by compressing V(t,z) with a nonlinear medium, called cooling scintillation. Resolving problem was proposed by orienting molecular and polarizing scintillation through the use of intense magnetic technology, called stabilizing the waveform

  12. Demonstrating the process of community innovation: the Indian Country Methamphetamine Initiative.

    Science.gov (United States)

    Walker, R Dale; Bigelow, Douglas A; LePak, Jessica Hope; Singer, Michelle J

    2011-01-01

    In 2007 the federal Department of Health and Human Services, Office for Minority Health, collaborating with other federal agencies, sponsored the Indian Country Methamphetamine Initiative (ICMI). ICMI was undertaken to create community-driven, culture-based best practices in methamphetamine prevention and treatment which could then be disseminated throughout Indian Country. The ICMI ultimately involved ten tribes and five national organizations. Each tribe established a coalition of community government, nongovernment agencies, and elements of civic society to develop a comprehensive assessment, plan, and then to implement the plan. Each tribal coalition planned a complex array of activities including treatment programs, public education and mobilization, law enforcement strategies, and other intervention strategies, each intervention described within a logic model. These interventions focused on logic modeling; coalitions; capacity development and service system optimization; law enforcement and justice; individual and family treatment; public information, awareness, and education; community mobilization; and a very popular ICMI strategy, cultural renaissance. It was concluded that worthwhile activities were conducted under ICMI sponsorship, but that the specific aim of demonstrating community-driven, culture-based innovations in a manner suitable for dissemination was achieved only to a limited extent. Based on this outcome together with similar experiences, recommendations for future initiatives are suggested.

  13. Convergent Validity of Four Innovativeness Scales.

    Science.gov (United States)

    Goldsmith, Ronald E.

    1986-01-01

    Four scales of innovativeness were administered to two samples of undergraduate students: the Open Processing Scale, Innovativeness Scale, innovation subscale of the Jackson Personality Inventory, and Kirton Adaption-Innovation Inventory. Intercorrelations indicated the scales generally exhibited convergent validity. (GDC)

  14. Drying of water based foundry coatings: Innovative test, process design and optimization methods

    DEFF Research Database (Denmark)

    Di Muoio, Giovanni Luca; Johansen, Bjørn Budolph

    on real industrial cases. These tools have been developed in order to simulate and optimize the drying process and reduce drying time and power consumption as well as production process design time and cost of expensive drying equipment. Results show that test methods from other industries can be used...... capacity goals there is a need to understand how to design, control and optimize drying processes. The main focus of this project was on the critical parameters and properties to be controlled in production in order to achieve a stable and predictable drying process. We propose for each of these parameters...... of Denmark with the overall aim to optimize the drying process of water based foundry coatings. Drying of foundry coatings is a relatively new process in the foundry industry that followed the introduction of water as a solvent. In order to avoid moisture related quality problems and reach production...

  15. The innovation process in a company supplying inputs for steel marketmetallurgical world market: a case study at Alpha S/A

    Directory of Open Access Journals (Sweden)

    Gleiciane Ferreira Botta

    2015-06-01

    Full Text Available This research investigates and analyzes the innovation process in a mining company supplying inputs for the global steel-metallurgical market. The analysis model was structured into four categories originated in the innovation process as the assumptions by Davila et al. (2007, to know: (i strategic and innovation models, (ii factors that can influence the implementation of the innovation, (iii management systems and/or tools, (iv indicators, metrics and results. A qualitative research strategy was based on a study of a single case and three criteria were used to judge the quality of research: construct validity, external validity and reliability. Multiple sources of evidence were used (interviews, documents and observation and data analysis observed three stages namely: (a data reduction, (b display, or exposition of data, (c checking/ conclusions based on interferences from evidences or premise. The results confirmed the existence of an unstructured and informal innovation process meticulously described from four elements of the analysis model. The findings point to a strategy and innovation model still in early stages of maturity, as well as execution influenced by structural and socio-behavioral issues.

  16. INTERDISCURSIVE PROCESSES IN LINGUISTICS AND LITERARY STUDIES: LANGUAGES AND MEDIA IN THE INNOVATION PROCESS OF THE FIELD

    Directory of Open Access Journals (Sweden)

    Rogério Barbosa da Silva

    2013-12-01

    Full Text Available We propose a brief reflection on the interaction between languages ??and media, resulting in a close dialogue between language and technological processes that underlie the historical, and temporal dimensions, but also discursive and audiovisual, especially in poetic interart. Such elements have formed the basis of the discussion held in the discipline Language, Media and Discourse Processes within the Postgraduate in Studies of Languages of CEFET MG

  17. DEPLOYMENT OF INNOVATIVE CHARACTERIZATION TECHNOLOGIES AND IMPLEMENTATION OF THE MARSSIM PROCESS AT RADIOLOGICALLY CONTAMINATED SITES.

    Energy Technology Data Exchange (ETDEWEB)

    KALB,P.D.; MILIAN,L.; LUCKETT,L.; WATTERS,D.; MILLER,K.M.; GOGOLAK,C.

    2001-05-01

    The success of this Accelerated Site Technology Deployment (ASTD) project is measured on several levels. First, the deployment of this innovative approach using in situ characterization, portable field laboratory measurements, and implementation of MARSSIM was successfully established for all three phases of D and D characterization, i.e., pre-job scoping, on-going disposition of waste, and final status surveys upon completion of the activity. Unlike traditional D and D projects, since the Brookhaven Graphite Research Reactor Decommissioning Project (BGRR-DP) is operating on an accelerated schedule, much of the work is being carried out simultaneously. Rather than complete a full characterization of the facility before D and D work begins, specific removal actions require characterization as the activity progresses. Thus, the need for rapid and cost-effective techniques for characterization is heightened. Secondly, since the approach used for this ASTD project was not thoroughly proven prior to deployment, a large effort was devoted to demonstrating technical comparability to project managers, regulators and stakeholders. During the initial phases, large numbers of replicate samples were taken and analyzed by conventional baseline techniques to ensure that BGRR-DP quality assurance standards were met. ASTD project staff prepared comparisons of data gathered using ISOCS and BetaScint with traditional laboratory methods and presented this information to BGRR-DP staff and regulators from EPA Region II, NYS Department of Environmental Conservation, and the Suffolk County Board of Health. As the results of comparability evaluations became available, approval for these methods was received and the techniques associated with in situ characterization, portable field laboratory measurements, and implementation of MARSSIM were gradually integrated into BGRR-DP procedures.

  18. DEPLOYMENT OF INNOVATIVE CHARACTERIZATION TECHNOLOGIES AND IMPLEMENTATION OF THE MARSSIM PROCESS AT RADIOLOGICALLY CONTAMINATED SITES

    International Nuclear Information System (INIS)

    KALB, P.D.; MILIAN, L.; LUCKETT, L.; WATTERS, D.; MILLER, K.M.; GOGOLAK, C.

    2001-01-01

    The success of this Accelerated Site Technology Deployment (ASTD) project is measured on several levels. First, the deployment of this innovative approach using in situ characterization, portable field laboratory measurements, and implementation of MARSSIM was successfully established for all three phases of D and D characterization, i.e., pre-job scoping, on-going disposition of waste, and final status surveys upon completion of the activity. Unlike traditional D and D projects, since the Brookhaven Graphite Research Reactor Decommissioning Project (BGRR-DP) is operating on an accelerated schedule, much of the work is being carried out simultaneously. Rather than complete a full characterization of the facility before D and D work begins, specific removal actions require characterization as the activity progresses. Thus, the need for rapid and cost-effective techniques for characterization is heightened. Secondly, since the approach used for this ASTD project was not thoroughly proven prior to deployment, a large effort was devoted to demonstrating technical comparability to project managers, regulators and stakeholders. During the initial phases, large numbers of replicate samples were taken and analyzed by conventional baseline techniques to ensure that BGRR-DP quality assurance standards were met. ASTD project staff prepared comparisons of data gathered using ISOCS and BetaScint with traditional laboratory methods and presented this information to BGRR-DP staff and regulators from EPA Region II, NYS Department of Environmental Conservation, and the Suffolk County Board of Health. As the results of comparability evaluations became available, approval for these methods was received and the techniques associated with in situ characterization, portable field laboratory measurements, and implementation of MARSSIM were gradually integrated into BGRR-DP procedures

  19. Innovative learning for innovation

    NARCIS (Netherlands)

    Dr.Ir. Hay Geraedts

    2010-01-01

    Introduction Innovation is crucial for companies who have to react to constantly changing markets. Several national and European research institutes stress the importance of developing innovation for small and medium size enterprises (SMEs). This was a trigger to design a minor on strategic

  20. Business Model Innovation Leadership

    DEFF Research Database (Denmark)

    Lindgren, Peter

    2012-01-01

    When SME´s practice business model (BM) innovation (BMI), leading strategically BMs through the innovation process can be the difference between success and failure to a BM. Business Model Innovation Leadership (BMIL) is however extremely complex to carry out especially to small and medium size...

  1. Improving the Services at the Outlets of McDonald’s Malaysia through Process Innovation

    OpenAIRE

    Chummar George, Pudussery

    2014-01-01

    In 2010, the food processing industry contributed about 10% of the Malaysian manufacturing output attracted a total of RM1.972 billion in 69 projects. Employment in the processed food and beverages industry decreased in 2009 by 5.1% to 43,080 compared with 45,418 in 2008. Small and medium sized enterprises represent more than 80% of the total number of establishments in the processed food segment. In Malaysia, McDonald’s is leading the food franchisor at second place to KFC, and is planning o...

  2. Purifying, concentrating and anhydriding bio-ethanol: Alternative process schemes and innovative separation methods

    International Nuclear Information System (INIS)

    Guerreri, G.; Lovati, A.

    1992-01-01

    Starting with the conventional process scheme for bio-ethanol production, this paper illustrates how the anhydriding section, which incorporates an azeotropic distillation process, can be conveniently substituted with a plate and frame pervaporation process which makes use of optimum heat exchange with the stripping section. This technical feasibility study, which proves the superior energy efficiency of the pervaporation scheme as compared with the conventional scheme, is followed by a cost benefit analysis which evidences the economic benefits also to be had with pervaporation

  3. Innovative process scheme for removal of organic matter, phosphorus and nitrogen from pig manure

    DEFF Research Database (Denmark)

    Karakashev, Dimitar Borisov; Schmidt, Jens Ejbye; Angelidaki, Irini

    2008-01-01

    blanket (UASB) reactor, partial oxidation), nitrogen (oxygen-limited autotrophic nitrification-denitrification, OLAND) and phosphorus (phosphorus removal by precipitation as struvite, PRS) from pig manure were tested. Results obtained showed that microfiltration was unsuitable for pig manure treatment....... PRS treated effluent was negatively affecting the further processing of the pig manure in UASB, and was therefore not included in the final process flow scheme. In a final scheme (PIGMAN concept) combination of the following successive process steps was used: thermophilic anaerobic digestion...... with sequential separation by decanter centrifuge, post-digestion in UASB reactor, partial oxidation and finally OLAND process. This combination resulted in reduction of the total organic, nitrogen and phosphorus contents by 96%, 88%, and 81%, respectively....

  4. Educational Process Reengineering and Diffusion of Innovation in Formal Learning Environment

    DEFF Research Database (Denmark)

    Khalid, Md. Saifuddin; Hossain, Mohammad Shahadat; Rongbutsri, Nikorn

    2011-01-01

    administration and evaluation and assessment. Educational environments are flexible and not governed by standard operating procedures, making technology use lithe. Theory of diffusion of innovations‟ is recommended to be integrated to reason and measure acceptance or rejection of EPR selected technology......In technology mediated learning while relative advantages of technologies is proven, lack of contextualization and process centric change, and lack of user driven change has kept intervention and adoption of educational technologies among individuals and organizations as challenges. Reviewing...... the formal, informal and non-formal learning environments, this study focuses on the formal part. This paper coins the term 'Educational Process Reengineering (EPR) based on the established concept of 'Business Process Reengineering (BPR) for process improvement of teaching learning activities, academic...

  5. Innovative Techniques for Large-Scale Collection, Processing, and Storage of Eelgrass (Zostera marina) Seeds

    National Research Council Canada - National Science Library

    Orth, Robert J; Marion, Scott R

    2007-01-01

    .... Although methods for hand-collecting, processing and storing eelgrass seeds have advanced to match the scale of collections, the number of seeds collected has limited the scale of restoration efforts...

  6. Optimization of a pharmaceutical freeze-dried product and its process using an experimental design approach and innovative process analyzers.

    Science.gov (United States)

    De Beer, T R M; Wiggenhorn, M; Hawe, A; Kasper, J C; Almeida, A; Quinten, T; Friess, W; Winter, G; Vervaet, C; Remon, J P

    2011-02-15

    The aim of the present study was to examine the possibilities/advantages of using recently introduced in-line spectroscopic process analyzers (Raman, NIR and plasma emission spectroscopy), within well-designed experiments, for the optimization of a pharmaceutical formulation and its freeze-drying process. The formulation under investigation was a mannitol (crystalline bulking agent)-sucrose (lyo- and cryoprotector) excipient system. The effects of two formulation variables (mannitol/sucrose ratio and amount of NaCl) and three process variables (freezing rate, annealing temperature and secondary drying temperature) upon several critical process and product responses (onset and duration of ice crystallization, onset and duration of mannitol crystallization, duration of primary drying, residual moisture content and amount of mannitol hemi-hydrate in end product) were examined using a design of experiments (DOE) methodology. A 2-level fractional factorial design (2(5-1)=16 experiments+3 center points=19 experiments) was employed. All experiments were monitored in-line using Raman, NIR and plasma emission spectroscopy, which supply continuous process and product information during freeze-drying. Off-line X-ray powder diffraction analysis and Karl-Fisher titration were performed to determine the morphology and residual moisture content of the end product, respectively. In first instance, the results showed that - besides the previous described findings in De Beer et al., Anal. Chem. 81 (2009) 7639-7649 - Raman and NIR spectroscopy are able to monitor the product behavior throughout the complete annealing step during freeze-drying. The DOE approach allowed predicting the optimum combination of process and formulation parameters leading to the desired responses. Applying a mannitol/sucrose ratio of 4, without adding NaCl and processing the formulation without an annealing step, using a freezing rate of 0.9°C/min and a secondary drying temperature of 40°C resulted in

  7. Innovative application of the moisture analyzer for determination of dry mass content of processed cheese

    Science.gov (United States)

    Kowalska, Małgorzata; Janas, Sławomir; Woźniak, Magdalena

    2018-04-01

    The aim of this work was the presentation of an alternative method of determination of the total dry mass content in processed cheese. The authors claim that the presented method can be used in industry's quality control laboratories for routine testing and for quick in-process control. For the test purposes both reference method of determination of dry mass in processed cheese and moisture analyzer method were used. The tests were carried out for three different kinds of processed cheese. In accordance with the reference method, the sample was placed on a layer of silica sand and dried at the temperature of 102 °C for about 4 h. The moisture analyzer test required method validation, with regard to drying temperature range and mass of the analyzed sample. Optimum drying temperature of 110 °C was determined experimentally. For Hochland cream processed cheese sample, the total dry mass content, obtained using the reference method, was 38.92%, whereas using the moisture analyzer method, it was 38.74%. An average analysis time in case of the moisture analyzer method was 9 min. For the sample of processed cheese with tomatoes, the reference method result was 40.37%, and the alternative method result was 40.67%. For the sample of cream processed cheese with garlic the reference method gave value of 36.88%, and the alternative method, of 37.02%. An average time of those determinations was 16 min. Obtained results confirmed that use of moisture analyzer is effective. Compliant values of dry mass content were obtained for both of the used methods. According to the authors, the fact that the measurement took incomparably less time for moisture analyzer method, is a key criterion of in-process control and final quality control method selection.

  8. Removal of disinfection by-product precursors by coagulation and an innovative suspended ion exchange process.

    Science.gov (United States)

    Metcalfe, David; Rockey, Chris; Jefferson, Bruce; Judd, Simon; Jarvis, Peter

    2015-12-15

    This investigation aimed to compare the disinfection by-product formation potentials (DBPFPs) of three UK surface waters (1 upland reservoir and 2 lowland rivers) with differing characteristics treated by (a) a full scale conventional process and (b) pilot scale processes using a novel suspended ion exchange (SIX) process and inline coagulation (ILCA) followed by ceramic membrane filtration (CMF). Liquid chromatography-organic carbon detection analysis highlighted clear differences between the organic fractions removed by coagulation and suspended ion exchange. Pretreatments which combined SIX and coagulation resulted in significant reductions in dissolved organic carbon (DOC), UV absorbance (UVA), trihalomethane and haloacetic acid formation potential (THMFP, HAAFP), in comparison with the SIX or coagulation process alone. Further experiments showed that in addition to greater overall DOC removal, the processes also reduced the concentration of brominated DBPs and selectively removed organic compounds with high DBPFP. The SIX/ILCA/CMF process resulted in additional removals of DOC, UVA, THMFP, HAAFP and brominated DBPs of 50, 62, 62, 62% and 47% respectively compared with conventional treatment. Copyright © 2015. Published by Elsevier Ltd.

  9. Bureaucracy and Innovation Revisited

    DEFF Research Database (Denmark)

    Hartmann, Mia Koss; Koss Hartmann, Rasmus

    , but by problematizing the relationship directly. Inspired by prior ethnographic studies of coercive bureaucracies and theories of secrecy and hiding behavior, we propose that coercive bureaucracies do not necessarily impede innovation, but rather create the appearance of doing so. Coercive bureaucracies create......, supplemented by innovation histories, surveys and expert evaluations. This argument implies that future research examines more deeply the organizational processes and practices by which innovation might occur even in coercive bureaucracies. Further, it encourages innovation research methods that rely less...

  10. Making Collaborative Innovation Accountable

    DEFF Research Database (Denmark)

    Sørensen, Eva

    The public sector is increasingly expected to be innovative, but the prize for a more innovative public sector might be that it becomes difficult to hold public authorities to account for their actions. The article explores the tensions between innovative and accountable governance, describes...... the foundation for these tensions in different accountability models, and suggest directions to take in analyzing the accountability of collaborative innovation processes....

  11. Innovation without Design?

    DEFF Research Database (Denmark)

    Pinheiro-Croisel, Rebecca; Hernes, Tor

    2012-01-01

    This paper explores innovation and social behaviourist theory in relation to sustainable urban projects in the highly institutionalized public sector (towns). Using empirical data from France, we examine the dynamics of a design process in which unexpected practices generated innovative urban...... into a movement of collective action, which presupposed the acquisition of a new identity. Ultimately, our objective is to combine social behaviourist theory and innovation theory and to facilitate innovative design in urban projects....

  12. Strategy for design NIR calibration sets based on process spectrum and model space: An innovative approach for process analytical technology.

    Science.gov (United States)

    Cárdenas, V; Cordobés, M; Blanco, M; Alcalà, M

    2015-10-10

    The pharmaceutical industry is under stringent regulations on quality control of their products because is critical for both, productive process and consumer safety. According to the framework of "process analytical technology" (PAT), a complete understanding of the process and a stepwise monitoring of manufacturing are required. Near infrared spectroscopy (NIRS) combined with chemometrics have lately performed efficient, useful and robust for pharmaceutical analysis. One crucial step in developing effective NIRS-based methodologies is selecting an appropriate calibration set to construct models affording accurate predictions. In this work, we developed calibration models for a pharmaceutical formulation during its three manufacturing stages: blending, compaction and coating. A novel methodology is proposed for selecting the calibration set -"process spectrum"-, into which physical changes in the samples at each stage are algebraically incorporated. Also, we established a "model space" defined by Hotelling's T(2) and Q-residuals statistics for outlier identification - inside/outside the defined space - in order to select objectively the factors to be used in calibration set construction. The results obtained confirm the efficacy of the proposed methodology for stepwise pharmaceutical quality control, and the relevance of the study as a guideline for the implementation of this easy and fast methodology in the pharma industry. Copyright © 2015 Elsevier B.V. All rights reserved.

  13. Linguistic & Rhetorical Paradigm as Innovative Theoretical Methodological Platform of Studying Discursive Processes of East Slavic and Western Cultures

    Directory of Open Access Journals (Sweden)

    Аlexandra A. Vorozhbitova

    2013-01-01

    Full Text Available The paper suggests studying conceptual models and mechanisms of linguistic consciousness of East Slavic and Western cultures with the application of the theoretical methodological approach of Linguistic & Rhetorical (L&R Paradigm as an integrative philological trend of an innovative type. The L&R Paradigm rests on the intersection of three categorical dimensions: ideological aspects of a speech event (ethos, logos, pathos; stages of universal cycle of idea-into-speech transformation (invention, disposition, elocution as a technology of discursive processes; levels of the structure of a linguistic personality as a discourse producer and ideology bearer (associative verbal network, thesaurus, pragmatic field. Hence, the article proposes three groups of L&R parameters of studying speech and thinking phenomena: ethos-motivational-dispositional; logos-thesaurus-inventional; pathos-verbal-elocutionary.

  14. Energy Saving Melting and Revert Reduction Technology: Innovative Semi-Solid Metal (SSM) Processing

    Energy Technology Data Exchange (ETDEWEB)

    Diran Apelian

    2012-08-15

    Semi-solid metal (SSM) processing has emerged as an attractive method for near-net-shape manufacturing due to the distinct advantages it holds over conventional near-net-shape forming technologies. These advantages include lower cycle time, increased die life, reduced porosity, reduced solidification shrinkage, improved mechanical properties, etc. SSM processing techniques can not only produce the complex dimensional details (e.g. thin-walled sections) associated with conventional high-pressure die castings, but also can produce high integrity castings currently attainable only with squeeze and low-pressure permanent mold casting processes. There are two primary semi-solid processing routes, (a) thixocasting and (b) rheocasting. In the thixocasting route, one starts from a non-dendritic solid precursor material that is specially prepared by a primary aluminum manufacturer, using continuous casting methods. Upon reheating this material into the mushy (a.k.a. "two-phase") zone, a thixotropic slurry is formed, which becomes the feed for the casting operation. In the rheocasting route (a.k.a. "slurry-on-demand" or "SoD"), one starts from the liquid state, and the thixotropic slurry is formed directly from the melt via careful thermal management of the system; the slurry is subsequently fed into the die cavity. Of these two routes, rheocasting is favored in that there is no premium added to the billet cost, and the scrap recycling issues are alleviated. The CRP (Trade Marked) is a process where the molten metal flows through a reactor prior to casting. The role of the reactor is to ensure that copious nucleation takes place and that the nuclei are well distributed throughout the system prior to entering the casting cavity. The CRP (Trade Marked) has been successfully applied in hyper-eutectic Al-Si alloys (i.e., 390 alloy) where two liquids of equal or different compositions and temperatures are mixed in the reactor and creating a SSM slurry. The process has been mostly

  15. An Innovative VHTR Waste Heat Integration with Forward Osmosis Desalination Process

    Energy Technology Data Exchange (ETDEWEB)

    Park, Min Young; Kim, Eung Soo [Seoul National Univ., Seoul (Korea, Republic of)

    2013-10-15

    The integration concept implies the coupling of the waste heat from VHTR with the draw solute recovery system of FO process. By integrating these two novel technologies, advantages, such as improvement of total energy utilization, and production of fresh water using waste heat, can be achieved. In order to thermodynamically analyze the integrated system, the FO process and power conversion system of VHTR are simulated using chemical process software UNISIM together with OLI property package. In this study, the thermodynamic analysis on the VHTR and FO integrated system has been carried out to assess the feasibility of the concept. The FO process including draw solute recovery system is calculated to have a higher GOR compared to the MSF and MED when reasonable FO performance can be promised. Furthermore, when FO process is integrated with the VHTR to produce potable water from waste heat, it still shows a comparable GOR to typical GOR values of MSF and MED. And the waste heat utilization is significantly higher in FO than in MED and MSF. This results in much higher water production when integrated to the same VHTR plant. Therefore, it can be concluded that the suggested integrated system of VHTR and FO is a very promising and strong system concept which has a number of advantages over conventional technologies.

  16. It's what you do and the way that you do it : team task, team size and innovation-relation group processes

    NARCIS (Netherlands)

    Curral, L.A.; Forrester, R.H.; Dawson, J.F.; West, M.A.

    2001-01-01

    This article describes a study of the relationships between team inputs (task type and team size) and team processes in 87 cross industry Portuguese teams, some of which had high and some low requirements to innovate. Team processes were measured using the Team Climate Inventory (TCI), which focuses

  17. From Innovation Community to Community Innovation User-initiated Innovation in Wireless Leiden

    NARCIS (Netherlands)

    van Oost, Elizabeth C.J.; Verhaegh, Stefan; Oudshoorn, Nelly E.J.

    2009-01-01

    The role of users in innovation processes has gained increasing attention in innovation studies, technology studies, and media studies. Scholars have identified users and use practices as a source of innovation. So far, however, little insight has been generated in innovation processes in which

  18. Advanced Practice Nursing Committee on Process Improvement in Trauma: An Innovative Application of the Strong Model.

    Science.gov (United States)

    West, Sarah Katherine

    2016-01-01

    This article aims to summarize the successes and future implications for a nurse practitioner-driven committee on process improvement in trauma. The trauma nurse practitioner is uniquely positioned to recognize the need for clinical process improvement and enact change within the clinical setting. Application of the Strong Model of Advanced Practice proves to actively engage the trauma nurse practitioner in process improvement initiatives. Through enhancing nurse practitioner professional engagement, the committee aims to improve health care delivery to the traumatically injured patient. A retrospective review of the committee's first year reveals trauma nurse practitioner success in the domains of direct comprehensive care, support of systems, education, and leadership. The need for increased trauma nurse practitioner involvement has been identified for the domains of research and publication.

  19. New strategies in actinide separation - water-soluble complexing agents for the innovative SANEX process

    International Nuclear Information System (INIS)

    Ruff, Christian M.; Muelllich, Udo; Geist, Andreas; Panak, Petra J.

    2012-01-01

    Reduction of the radiotoxicity and thermal output of radioactive wastes prior to their permanent disposal is a topic of extreme interest for the issue of final nuclear waste disposal. One possibility to this end is a process referred to as actinide separation. This process can be optimised by means of a newly developed water-soluble molecule, as has been shown in studies on the molecule's complex chemistry using ultra-modern laser-based spectroscopy methods under process-relevant reaction conditions. Through the use of curium (III) and europium (III), which as members of the trivalent actinides and lanthanides family have excellent spectroscopic properties, it has been possible to generate spectroscopic and thermodynamic data which will facilitate our understanding of the complex chemistry and extraction chemistry of this molecule family.

  20. The Role of Fe and Ni for S-process Nucleosynthesis and Innovative Nuclear Technologies

    CERN Document Server

    Giubrone, G; Perkowski, J; Andriamonje, S; Carrapico, C; Wallner, A; Vannini, G; Quesada, J M; Lederer, C; Tarrio, D; Berthier, B; Lozano, M; Krticka, M; Domingo-Pardo, C; Chiaveri, E; Jericha, E; Ferrari, A; Massimi, C; Avrigeanu, V; Martinez, T; Guerrero, C; Andrzejewski, J; Karadimos, D; Mendoza, E; Ganesan, S; Vlachoudis, V; Milazzo, P M; Cortes, G; Becares, V; Tain, J L; Variale, V; Quinones, J; Calvino, F; Kappeler, F; Gunsing, F; Gramegna, F; Colonna, N; Marrone, S; Lebbos, E; Paradela, C; Mastinu, P F; Vaz, P; Tassan-Got, L; Kadi, Y; Dillman, I; Cano-Ott, D; Brugger, M; Audouin, L; Fernandez-Ordonez, M; Sarmento, R; Becvar, F; Goncalves, I F; Martin-Fuertes, F; Cerutti, F; Pina, G; Mosconi, M; Tagliente, G; Duran, I; Berthoumieux, E; Praena, J; Ioannides, K; Weiss, C; Mirea, M; Gomez-Hornillos, M B; Vlastou, R; Calviani, M; Nolte, R; Mengoni, A; Gonzalez-Romero, E; Marganiec, J; Leeb, H; Heil, M; Meaze, M H; Pavlik, A; Belloni, F; Harrispopulos S

    2011-01-01

    The accurate measurement of neutron capture cross sections of all Fe and Ni isotopes is important for disentangling the contribution of the s-process and the r-process to the stellar nucleosynthesis of elements in the mass range 60 < A < 120. At the same time, Fe and Ni are important components of structural materials and improved neutron cross section data is relevant in the design of new nuclear systems. With the aim of obtaining improved capture data on all stable iron and nickel isotopes, a program of measurements has been launched at the CERN Neutron Time of Flight Facility n_TOF.

  1. Innovative fabrication processing of advanced composite materials concepts for primary aircraft structures

    Science.gov (United States)

    Kassapoglou, Christos; Dinicola, Al J.; Chou, Jack C.

    1992-01-01

    The autoclave based THERM-X(sub R) process was evaluated by cocuring complex curved panels with frames and stiffeners. The process was shown to result in composite parts of high quality with good compaction at sharp radius regions and corners of intersecting parts. The structural properties of the postbuckled panels fabricated were found to be equivalent to those of conventionally tooled hand laid-up parts. Significant savings in bagging time over conventional tooling were documented. Structural details such as cocured shear ties and embedded stiffener flanges in the skin were found to suppress failure modes such as failure at corners of intersecting members and skin stiffeners separation.

  2. Les innovations financières s’inscrivent-elles dans un processus schumpeterien de destruction créatrice ? Do financial innovations fit into the scheme of the Schumpeterian creative destruction process?

    Directory of Open Access Journals (Sweden)

    Faruk Ülgen

    2012-11-01

    Full Text Available Le présent article pose la question de savoir si les innovations financières peuvent être pensées dans le cadre du processus de destruction créatrice. Dans cet objectif, la dynamique schumpeterienne de l’économie capitaliste est interprétée en termes d’une économie monétaire dans laquelle les innovations bancaires et financières affectent structurellement les activités entrepreneuriales et jouent un rôle crucial sur la stabilité macroéconomique. À l’opposé des effets, souvent jugés positifs, des innovations des entrepreneurs schumpeteriens sur la croissance, les marchés financiers libéralisés génèrent des déséquilibres cumulés à travers le développement d’une financiarisation spéculative qui peut être étudiée en termes de la deuxième vague des cycles schumpeteriens. Le processus de destruction créatrice des innovations peut se transformer en une création destructrice. Par conséquent, la redéfinition des mécanismes de régulation dans une optique minskienne s’avère nécessaire pour faire face aux déséquilibres macroéconomiques.This paper asks the question to know if financial innovations can be thought within the framework of a creative destruction process. In this aim, the Schumpeterian dynamics of the capitalist economy is studied in terms of a monetary economy where banking and financial innovations affect structurally entrepreneurs’ activities and play a crucial role on the macroeconomic stability. Contrary to the effects, usually assumed to be positive, of innovations of the Schumpeterian entrepreneurs on the growth, liberalized financial markets generate accumulated imbalances through the development of a speculative financialization which can be studied in terms of the second wave of Schumpeterian business cycles. The process of creative destruction of innovations may turn to be a destructive creation. Then, redefining of regulatory mechanisms in a Minskian perspective seems to be

  3. A case in support of implementing innovative bio-processes in the metal mining industry

    NARCIS (Netherlands)

    Sanchez Andrea, I.; Stams, A.J.M.; Weijma, J.; Gonzalez Contreras, P.A.; Dijkman, H.; Rozendal, R.A.; Johnson, D.B.

    2016-01-01

    The metal mining industry faces many large challenges in future years, among which is the increasing need to process low-grade ores as accessible higher grade ores become depleted. This is against a backdrop of increasing global demands for base and precious metals, and rare earth elements.

  4. Multi-Stakeholder Processes and Innovation Systems towards Science for impact

    NARCIS (Netherlands)

    Vugt, van S.M.; Geene, van J.

    2008-01-01

    Multi_stakeholder processes (MSPs) have become an important phenomena in the work of many of the Science Groups and knowledge units of Wageningen UR. To realise ‘science for impact’ it is increasingly recognized that stakeholder engagement is a critical element. Much remains to be understood about

  5. The Acimet{reg_sign} Process: An innovative approach to biogasification of municipal sludge

    Energy Technology Data Exchange (ETDEWEB)

    Ghosh, S. [Univ. of Utah, Salt Lake City, UT (United States); Buoy, K. [DuPage County Dept. of Public Works, Wheaton, IL (United States)

    1993-12-31

    This paper reports the results of successful completion of an advanced anaerobic-digestion-process commercialization program supported by the County of DuPage, IL and the State of Illinois Department of Energy and Natural Resources, Springfield, IL. The project entailed anaerobic digestion of municipal sludge by pilot- and full-scale Acimet Process, which replaced an existing high-rate digestion system. The project was conducted at the Woodridge-Greenevalley wastewater treatment plant of DuPage County, IL. The Acimet Process relies on the application of two-phase anaerobic digestion for enhanced methane production and stabilization of municipal sludges, the disposal of which poses intractable problems in many municipal wastewater treatment plants. Unlike conventional anaerobic digestion processes, the Acimet System optimizes the liquefaction- acidification and acetogenic-methanogenic fermentations in separate acid- and methane-phase digesters operated at different hydraulic residence times (HRTs) to maximize feed hydrolysis and acidification, as well as biomethanation of the acidic intermediates. The Acimet System installed at the Woodridge Plant utilizes two mesophilic upflow digesters of novel design exhibiting unusually high product-formation efficiencies achieved without any mechanical mixing of the reactor contents.

  6. Sulfide ore looping oxidation : an innovative process that is energy efficient and environmentally friendly

    Energy Technology Data Exchange (ETDEWEB)

    McHugh, L.F.; Balliett, R.; Mozolic, J.A. [Orchard Material Technology, North Andover, MA (United States)

    2008-07-01

    Many sulphide ore processing methods use different types of roasting technologies. These technologies are generally quite effective, however, they represent significant energy use and environmental cost. This paper discussed and validated the use of a two-step looping oxidation process that effectively removes sulphur while producing materials of adequate purity in an energy efficient and environmentally sound manner. This paper described the process in detail and compared it to existing technologies in the area of energy efficiency, and off-gas treatment energy requirements. Validation of the looping oxidation concept was described and the starting chemistries of each chemical were listed. Thermodynamic modeling was used to determine the temperature at which the reaction should begin and to predict the temperature at which the reaction should be complete. The test apparatus and run conditions were also described. It was concluded that there are several critical stages in the looping process where energy recovery is economically attractive and could easily be directed or converted for other plant operations. All reactions were fast and efficient, allowing for reduced equipment size as well as higher throughput rates. 11 refs., 3 tabs., 2 figs.

  7. Comminution of the U-10Mo by hydriding cycles innovative process

    Energy Technology Data Exchange (ETDEWEB)

    Faeda, Kelly C.M.; Santos, Ana Maria M. dos; Paula, Joao B. de; Pereira, Edilson M.; Pedrosa, Tercio A.; Lameiras, Fernando S.; Ferraz, Wilmar B., E-mail: ferrazw@cdtn.br, E-mail: kelly.faeda@prof.una.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2013-07-01

    The research, test and producing radioisotopes compact reactors were developed with the use of high levels of enriched fuel of approximately 90% of the fissile isotope U-235. Since the 80s', a policy under the context of international program RERTR (Reduced Enrichment for Research and Test Reactors) encourages the fuel replacement of the high enriched fuel by the low one of about 20 % U-235. One way to compensate the substitution for the low enrichment fuel is to employ high density metal uranium alloys. The fabrication of compact reactor fuel uses the metal matrix dispersion and, for this, uranium alloys are used in the form of powders. Despite the high densities, the metallic uranium based alloys are ductile and therefore difficult to be comminuted. Among the different comminution processes, the hydriding-dehydriding process has proved most advantageous, primarily due to their relative simplicity of processing and low manufacturing cost. In this paper, we present the results of the development of the U-10Mo alloy comminution process by the hydriding-dehydriding method on a laboratory scale. Samples of the alloy were subjected to different hydriding cycle numbers in order to verify its influence in relation to the particle size distribution of powders. Powders of different particle sizes were obtained and characterized by the physical and morphological characteristics by optical microscopy, scanning electron microscopy and X ray diffraction. The obtained results are evaluated and discussed. (author)

  8. Rheology as a tool for evaluation of melt processability of innovative dosage forms

    DEFF Research Database (Denmark)

    Aho, Johanna Maaria; Boetker, Johan P; Baldursdottir, Stefania

    2015-01-01

    ) printing, will have an increasingly important role when designing products for flexible dosing, since dosage forms based on compacting of a given powder mixture do not enable manufacturing of optimal pharmaceutical products for personalized treatments. The melt processability of polymers and API...

  9. Innovative wastewater treatment process with reduced energy consumption and regeneration of nutrients

    DEFF Research Database (Denmark)

    Schmidt, Jens Ejbye; Fitsios, E.; Angelidaki, Irini

    Treatment of municipal wastewater by anaerobic digestion was investigated. A new process is described here, where anaerobic digestion of municipal wastewater is the main step for removal of organic matter, resulting in much lower sludge production. Steps for removal nutrients are also included. T...

  10. Design for end of life : A design methodology for the early stages of an innovation process

    NARCIS (Netherlands)

    Peeters, J.R.; Dewulf, K.R.

    2012-01-01

    The first phases of the engineering design process, such as the problem definition, the information gathering and the idea generation phase, are commonly considered as important steps in product development, since the cost of a product is assumed to be largely determined within these design steps.

  11. INCREASING YIELDS AND BROADENING MARKETS: PROCESS INNOVATIONS IN THE MANUFACTURING OF ENERGY-SAVING WINDOW GLAZINGS

    Energy Technology Data Exchange (ETDEWEB)

    Mark Burdis; Neil Sbar

    2005-04-01

    The goal of this project was to develop and implement advanced thin film process technology which would significantly improve the manufacturability of both static and dynamic high performance energy saving coatings for windows. The work done has been aimed at improvements to the process that will result in increases in yield, and this was divided into four main areas, dealing with improvements in substrate preparation methods, reductions in the incidence of problems caused by particulate contamination, use of in-situ optical monitoring to improve process control, and overall system integration to enable simplified, and therefore lower cost operation. Significant progress has been made in each of the areas. In the area of substrate preparation, the enhanced washing techniques which have been developed, in combination with a new inspection technique, have resulted in significant reductions in the number of EC devices which are rejected because of substrate problems. Microscopic inspection of different defects in electrochromic devices showed that many were centered on particles. As a result, process improvements aimed at reducing the incidence of particles throughout the entire process have been implemented. As a result, the average number of defects occurring per unit area has been significantly reduced over the period of this project. The in-situ monitoring techniques developed during this project have become an indispensable part of the processing for EC devices. The deposition of several key layers is controlled as a result of in-situ monitoring, and this has facilitated significant improvements in uniformity and repeatability. Overall system integration has progressed to the stage where the goal of a closed-loop monitoring and control system in within reach, and it is anticipated that this will be achieved during the scale-up phase. There has been a clear increase in the yield occurring over the period of this project (Sept 1999 to September 2003), which is

  12. Review of pretreatment processes for lignocellulosic ethanol production, and development of an innovative method

    International Nuclear Information System (INIS)

    Chiaramonti, David; Prussi, Matteo; Ferrero, Simone; Oriani, Luis; Ottonello, Piero; Torre, Paolo; Cherchi, Francesco

    2012-01-01

    Biomass pretreatment aims at separating and providing easier access to the main biomass components (cellulose, hemicellulose and lignin), eventually removing lignin, preserving the hemicellulose, reducing the cellulose crystallinity and increasing the porosity of the material. Pretreatment is an essential step towards the development and industrialization of efficient 2nd generation lignocellulosic ethanol processes. The present work reviewed the main options available in pretreatment. Autohydrolysis and steam explosion were then selected for further investigation. Experimental work was carried out on batch scale reactors, using Miscanthus as biomass feedstock: the effects on sugar solubilization and degradation products generation have been examined for each of these two pretreatment systems. A new process using only water and steam as reacting media was then developed, experimentally tested, and results compared to those achieved by the autohydrolysis and steam explosion processes. Products obtained with the new pretreatment contained a lower amount of usual fermentation inhibitor compounds compared to that typically obtained in steam explosion. This result was achieved under operating conditions that at the same time allowed a good xylan yield, preventing degradation of hemicelluloses. The new pretreatment process was also able to act as an equalization step, as the solid material from the pretreatment phase had a similar composition even under different operating conditions. As regards the effect of pretreatment on enzymatic hydrolysis, the new process achieved yields similar to steam explosion on glucans: however, this was obtained reducing the formation of degradation products from sugars, mainly from C5 sugars. These results made the proposed pretreatment system suitable for further development and industrialization on pilot and industrial scale.

  13. Upgrading of automobile shredder residue via innovative granulation process 'ReGran'.

    Science.gov (United States)

    Holthaus, Philip; Kappes, Moritz; Krumm, Wolfgang

    2017-01-01

    Stricter regulatory requirements concerning end-of-life vehicles and rising disposal costs necessitate new ways for automobile shredder residue utilisation. The shredder granulate and fibres, produced by the VW-SICON-Process, have a high energy content of more than 20 MJ kg -1 , which makes energy recovery an interesting possibility. Shredder fibres have a low bulk density of 60 kg m -3 , which prevents efficient storing and utilisation as a refuse-derived fuel. By mixing fibres with plastic-rich shredder granulate and heating the mixture, defined granules can be produced. With this 'ReGran' process, the bulk density can be enhanced by a factor of seven by embedding shredder fibres in the partially melted plastic mass. A minimum of 26-33 wt% granulate is necessary to create enough melted plastic. The process temperature should be between 240 °C and 250 °C to assure fast melting while preventing extensive outgassing. A rotational frequency of the mixing tool of 1000 r min -1 during heating and mixing ensures a homogenous composition of the granules. During cooling, lower rotational frequencies generate bigger granules with particles sizes of up to 60 mm at 300 r min -1 . To keep outgassing to a minimum, it is suggested to melt shredder granulate first and then add shredder fibres. Adding coal, wood or tyre fluff as a third component reduces chlorine levels to less than 1 wt%. The best results can be achieved with tyre fluff. In combination with the VW-SICON-Process, ReGran produces a solid recovered fuel or 'design fuel' tailored to the requirements of specific thermal processes.

  14. Regional innovative and investment processes analysis and their impact on food-industry wine-producing enterprises development in Odessa region

    Directory of Open Access Journals (Sweden)

    Bondarenko Svitlana Аnatoliyivna

    2016-02-01

    Full Text Available The article deals with the study of state of winemaking sector, trends of innovative development of industrial enterprises of Ukraine and Odessa region are analyzed and based on this the characteristic patterns and main shortcomings are identified. The regional innovation and investment processes are anylyzed, the nature of its influence on development of wineries in food industry of Odessa region is identified. It is proved that the regulatory impact on development of viticulture and wine-making should focus on conditions and behavior of industry enterprises and directly or indirectly affect the efficiency of its business processes. One of management tools of socio-economic development of regions is regulation of innovation and investment processes, strict control over the use of targeted funds for program solving of region develoment priorities.

  15. Concrete decontamination: two innovative processes in response to surface or deep contamination

    International Nuclear Information System (INIS)

    CUER, F.; Nadai, A. de; Faure, S.

    2008-01-01

    To meet the future needs in the nuclear industry as regards dismantling and decommissioning, the LPAD (Laboratoire des Procedes Avances de Decontamination) develops new specific techniques to decontaminate concretes: the drying gel process adapted to surface contamination and the electrokinetics process to treat deep contamination. Indeed, because the concrete constitute a porous medium, two types of contamination can be met according to the environment to which is subjected the material. In the case of an accidental or dry contamination, radio elements do not penetrate beyond the first millimeters of the material. The contamination is then considered as surface. On the contrary, the contamination is considered as 'deep' when radioactive ions have diffused deeply under the effects of the natural diffusion. This is the case in fuel storage pond or other many nuclear infrastructures. (authors)

  16. INNOVATIVE TECHNOLOGY FOR THE PRODUCTION OF FOOD ADDITIVES FROM PUMPKIN PROCESSING SECONDARY RESOURCES

    OpenAIRE

    Kupin G. A.; Kornen N. N.; Matvienko A. N.; Shahray T. A.; Pershakova T. V.

    2016-01-01

    The article presents data characterizing the composition of macro and micronutrients from secondary resources of pumpkin processing – pumpkin pomace. We have found that extracts of pumpkin are valuable raw materials for the production of food additives, as they contain proteins, dietary fiber, including pectin and protopectin, minerals, as well as such biologically active substances as vitamin C, β- carotene and P-active substances using nuclear magnetic relaxation, it is shown that pretreatm...

  17. The innovation process : suggestions for improvement in a research and development environment / Friedrich Wilhelm Hein Kruger

    OpenAIRE

    Kruger, Friedrich Wilhelm Hein

    1998-01-01

    Sasol Ltd is regarded as the world leader in Fischer-Tropsch technology and endeavours to reinforce this, not necessarily sustainable, competitive advantage by globalisation. This globalisation strategy reflects the company's commitment to sustainable growth through the development, production, and marketing of new products and processes. Sasol Technology (Pty) Ltd is clearly an important role player in the realisation of this vision, and strives to add optimum value to the tre...

  18. Strategic entrepreneurship: an integrated innovative entrepreneurial process for CRM implementation at Indian SMEs

    OpenAIRE

    Mehta, Arpita

    2011-01-01

    The purpose of this theoretical framework is, to provide a better understanding of the prospects, process, problems, usage and issues related to Customer Relationship Management (CRM) in Indian SMEs so that it may help to implement, adopt and use CRM as an interactive entrepreneurial tool for strategic and successful customer relationship management at Indian SMEs. To reach this understanding this research can starts with three dimensions or group of respondents like CRM Vendor (CRM professio...

  19. Innovative process routes for a high-quality concrete recycling in the aggregates and cement industries

    OpenAIRE

    Bru , Kathy; Menard , Yannick; Touzé , Solène; Le Moign , Alain; Poirier , Jean Eric; Ruffié , Gilles; Bonnaudin , Fabrice; Von Der Weid , Frédéric

    2011-01-01

    International audience; Hardened concrete is a composite material that contains two main phases: the matrix (hardened cement paste, 20 %) and aggregates (gravels and sand, 80 %). The liberation and the recycling of these constituents can provide an answer to i) the exploration of new aggregates supply sources imposed by the depletion of natural deposit and the faced difficulties when trying to open new quarries and ii) the reduction of CO2 emissions in the clinker manufacturing process throug...

  20. Building Information Modeling (BIM) Primer. Report 1: Facility Life-Cycle Process and Technology Innovation

    Science.gov (United States)

    2012-08-01

    design. Negatives of the software, Melendez said, was that it was too time consuming and demanding at the initial design phase. Also, her learning...manage the building using BIM as part of the WO process. ii. Today it is preferred that installations prepare for delivery of BIM and have inplace...offices, a theater, exhibition hall, and cafe Project Team Urban Design Group, Hathaway Dinwiddie, TBD Consultants, IBE Consulting Engineers, KPFF