Heat recovery with heat pumps in non-energy intensive industry: A detailed bottom-up model analysis in the French food and drink industry

International Nuclear Information System (INIS)

Seck, Gondia Sokhna; Guerassimoff, Gilles; Maïzi, Nadia

2013-01-01

Highlights: • First bottom-up energy model for NEI at 4-digit level of NACE for energy analysis. • Energy end-use modelling due to the unsuitability of end-product/process approach. • Analysis of heat recovery with HP on industrial processes up to 2020 in French F and D. • Energy consumption and emissions drop respectively by 10% compared to 2001 and 9% to 1990. • Results only achieved at heat temperature below 100 °C, concentrated in 1/3 of F and D sectors. - Abstract: Rising energy prices and environmental impacts inevitably encourage industrials to get involved in promoting energy efficiency and emissions reductions. To achieve this goal, we have developed the first detailed bottom-up energy model for Non-Energy Intensive industry (NEI) to study its global energy efficiency and the potential for CO 2 emissions reduction at a 4-digit level of NACE classification. The latter, which is generally neglected in energy analyses, is expected to play an important role in reducing industry energy intensity in the long term due to its economic and energy significance and relatively high growth rate. In this paper, the modelling of NEI is done by energy end-use owing to the unsuitability of the end-product/process approach used in the Energy Intensive industry modelling. As an example, we analysed the impact of heat recovery with heat pumps (HP) on industrial processes up to 2020 on energy savings and CO 2 emissions reductions in the French food and drink industry (F and D), the biggest NEI sector. The results showed HP could be an excellent and very promising energy recovery technology. For further detailed analysis, the depiction of HP investment cost payments is given per temperature range for each F and D subsector. This model constitutes a useful decision-making tool for assessing potential energy savings from investing in efficient technologies at the highest level of disaggregation, as well as a better subsectoral screening

Consequences of Market Liberalization for the Operators of the Dairy Subsector in Morocco

Directory of Open Access Journals (Sweden)

M. T. Sraïri

2007-01-01

Full Text Available The Moroccan dairy subsector has gone through an eventful recent history. The initial situation, in the early 1970s, was characterized by a high level of State regulation. At that time, there was an increasing domestic demand associated to a low availability of milk products; therefore State authorities encouraged local production and processing. But at the beginning of the 1980s, a series of structural adjustment measures were implemented and all subsidies were progressively suppressed. These sudden successive changes seriously impacted on the organization of the dairy subsector, particularly at the level of dairy cattle farms, by markedly modifying production practices. Currently, another significant stage for the Moroccan dairy subsector is the ongoing negotiation of free trade agreement with the European Union. This will lead to the end of protection for domestic dairy products and to increased competition between local and imported dairy products. In a context of market liberalization associated with the price of agricultural inputs rising on international markets, it will be essential to upgrade productive tools and policies of the subsector, which will have consequences on all operators along the commodity chain. This will be vital for the upholding of milk production, collection and transformation activities in Morocco, under conditions favorable to their sustainable development: pursuit of optimal milk yield and quality, efficient irrigation water productivity, and fair distribution of incomes generated by the subsector to all operators, with an aim to adjust the price to the purchase power of consumers.

Consumption of agro-industrial supplies by the baker subsector of Palmira, Valle, Colombia. Consumo de insumos agroindustriales por el subsector panificador de Palmira, Valle del Cauca.

Directory of Open Access Journals (Sweden)

Adarme J Wilson

2007-06-01

Full Text Available The indicators of agroindustrial consumption in the bakers subsector Pymes play a primary role for designing sustainable strategies for the small craftsman of bread. The administrative, operative and human talent subsystems were evaluated, in 30 of 178 organizations that conformed the bakers subsystems of Palmira on 2005. The estimated annual consumption of wheat flour on 2004 was 2016 t; 348 t of sugar; 240 t of cheese; 54 t of salt; 492 t of margarine; 99 t of yeast; 151200 panels of eggs. With regarding to raw materials it consumes 384000 m3 of natural gas; 1.2 million kw of electric power and 156000 m3 of water. The sector generates 681 direct employments. Map is presented with the location of 86% of the bakeries registered in the Trade Chamber. There is not a unique bakery that had implemented a program of Good Manufacture Practices BPM in an integral way, that meets the National Institute of Medications and Foods Surveillance INVIMA Standars, that has of a system of Hazard Analysis and Critical Control Point (HACCP or have been is to be certified with Quality Assuring Standars (ISO 9000, and/or Environmental Administration (ISO 14000, with occupational health programs (OHSAS 18000 and permanent improvement programs relative to administrative and commercial aspects.Los indicadores de consumo agroindustrial en las Pymes del subsector panificador resultan apremiantes para el diseño de estrategias de sostenibilidad para los pequeños artesanos del pan. Se evaluaron los subsistemas administrativos, talento humano y operativo en 30 de las 178 organizaciones que conformaron el subsistema panificador de Palmira en el 2005. El consumo estimado anual para el 2004 de harina de trigo fue 2.016 t; 348 t de azúcar; 240 t de queso; 54 t de sal; 492 t de margarina; 99 t de levadura; 151.200 paneles de huevos. En materias primas auxiliares consume 384.000 m3 de gas natural; 1.2 millones de kw de energía eléctrica y 156.000 m3 de agua. El sector genera

Integrated pollution prevention and control for heavy ceramic industry in Galicia (NW Spain).

Science.gov (United States)

Barros, M C; Bello, P; Roca, E; Casares, J J

2007-03-22

The heavy ceramic industry (building materials and refractory products manufacture) is an important source of pollutants to the environment. For this reason these industrial sub-sectors are included in prevention and control pollution policies, specifically those of the European Union. The IPPC Directive pays particular attention to the mineral industries, not least to the ceramic industry (epigraph 3.5, Annex I). In this paper, a methodology which is being applied to support IPPC installations and the competent administrative authority in Galicia (NW Spain) is presented. For that, the Galician heavy ceramic industry is analysed, as also are the ways to study the Best Available Techniques (BAT) with a view to establishing the emission limit values (ELV) for each specific case. Hence, a technological state of the art has been carried out for both sub-sectors, from the point of view of implementation of the IPPC in Galicia. Following this, the processes are described briefly and an analysis of the consumption and emission levels of the main pollutants is made. An inventory that includes the best environmental practices and the preventive and abatement candidate techniques as BAT was elaborated for both considered sub-sectors. An information data sheet for each candidate BAT is presented as a method to help both the industries and the competent authority to identify a candidate technique of the inventory as BAT. Three illustrative examples of the application of this procedure are presented for different emissions to environmental media for Galician installations.

Market Report for the Industrial Sector, 2009

Energy Technology Data Exchange (ETDEWEB)

Sastri, Bhima [Office of Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States); Brueske, Sabine [Energetics Inc., Columbia, MD (United States); de los Reyes, Pamela [Energetics Inc., Columbia, MD (United States); Jamison, Keith [Energetics Inc., Columbia, MD (United States); Justiniano, Mauricio [Energetics Inc., Columbia, MD (United States); Margolis, Nancy [Energetics Inc., Columbia, MD (United States); Monfort, Joe [Energetics Inc., Columbia, MD (United States); Raghunathan, Anand [Energetics Inc., Columbia, MD (United States); Sabouni, Ridah [Energetics Inc., Columbia, MD (United States)

2009-07-01

This report provides an overview of trends in industrial-sector energy use. It focuses on some of the largest and most energy-intensive industrial subsectors and several emerging technologies that could transform key segments of industry.

Appraisal of agricultural subsectors growth in various policy regimes ...

African Journals Online (AJOL)

% in 2010. This is as a result of abysmally poor performance of its subsectors. With the exception of crop sub sector, livestock share of agricultural GDP declined from 24% in 1980 to 6% in 2010; forestry from 4% to 1% and fishery from 11% to ...

IDENTIFY: opportunities for improving industrial energy efficiency and mitigating global climate change

Energy Technology Data Exchange (ETDEWEB)

Cornland, Deborah Wilson; Lazarus, Michael; Heaps, Charles; Hippel, David von; Hill, David [Stockholm Environment Inst., Stockholm (Sweden); Williams, Robert [United Nations Industrial Development Organization (UNIDO), Vienna (Austria)

1998-09-01

In response to a formal request by the Group of 77 and China, the United Nations Industrial Development Organization (UNIDO) initiated a study to identify opportunities to reduce the emissions of greenhouse gases from energy-intensive industries in developing countries. The study resulted in the development of the IDENTIFY software tool which can be useful for evaluating projects under consideration for investment through Activities Implemented Jointly (AIJ). IDENTIFY consists of an Analysis tool which enables the user to evaluate and compare the costs, energy requirements, and greenhouse-gas emissions associated with scenarios of specific technology, and process options and a Technology Inventory which provides information describing energy-efficient, best-available technologies and processes that can be used to abate greenhouse-gas emissions in the most energy-intensive industrial sub-sectors as well as cross-cutting measures applicable in a range of sub-sectors. (author)

Forecasting value added of agricultural sub-sectors during fourth five-year development plan in iran

International Nuclear Information System (INIS)

Nassabian, S.

2009-01-01

This article focuses on forecasting the values added of agricultural sub-sectors, including agronomy, fishing, forestry, animal husbandry and agricultural services, using the Artificial Neural Networks (ANN) model. It compares the resulting figures with the target estimates throughout the plan within the years 1384-1388 (2005-2009). It turns out that the forecasted values added in the sub-sectors of agronomy and agricultural services are higher and slower than the estimated values added required due to the plan, respectively. Also the high conformity of the estimated and forecasted value added on the horizon of the fourth five-year plan, while the other sub-sectors both the values are close to each other. The results indicate that the capability of ANN method for forecasting variables is more suitable than the other methods. (author)

The Life Science Exchange: a case study of a sectoral and sub-sectoral knowledge exchange programme.

Science.gov (United States)

Perkins, Brian Lee; Garlick, Rob; Wren, Jodie; Smart, Jon; Kennedy, Julie; Stephens, Phil; Tudor, Gwyn; Bisson, Jonathan; Ford, David V

2016-04-27

Local and national governments have implemented sector-specific policies to support economic development through innovation, entrepreneurship and knowledge exchange. Supported by the Welsh Government through the European Regional Development Fund, The Life Science Exchange® project was created with the aim to increase interaction between stakeholders, to develop more effective knowledge exchange mechanisms, and to stimulate the formation and maintenance of long-term collaborative relationships within the Welsh life sciences ecosystem. The Life Science Exchange allowed participants to interact with other stakeholder communities (clinical, academic, business, governmental), exchange perspectives and discover new opportunities. Six sub-sector focus groups comprising over 200 senior stakeholders from academia, industry, the Welsh Government and National Health Service were established. Over 18 months, each focus group provided input to inform healthcare innovation policy and knowledge mapping exercises of their respective sub-sectors. Collaborative projects identified during the focus groups and stakeholder engagement were further developed through sandpit events and bespoke support. Each sub-sector focus group produced a report outlining the significant strengths and opportunities in their respective areas of focus, made recommendations to overcome any 'system failures', and identified the stakeholder groups which needed to take action. A second outcome was a stakeholder-driven knowledge mapping exercise for each area of focus. Finally, the sandpit events and bespoke support resulted in participants generating more than £1.66 million in grant funding and inward investment. This article outlines four separate outcomes from the Life Science Exchange programme. The Life Science Exchange process has resulted in a multitude of collaborations, projects, inward investment opportunities and special interest group formations, in addition to securing over ten times its own

Decomposing the Decoupling of Water Consumption and Economic Growth in China’s Textile Industry

Directory of Open Access Journals (Sweden)

Yi Li

2017-03-01

Full Text Available Unprecedented economic achievement in China’s textile industry (TI has occurred along with rising water consumption. The goal of industrial sustainable development requires the decoupling of economic growth from resource consumption. This paper examines the relationship between water consumption and economic growth, and the internal influence mechanism of China’s TI and its three sub-sectors: the manufacture of textiles (MT sector, the Manufacture of Textile Wearing Apparel, Footwear, and Caps (MTWA sector, and the manufacture of chemical fibers (MCF sector. A decoupling analysis was performed and the Laspeyres decomposition method was applied to the period from 2001 to 2014. We showed that six of the fourteen years analyzed (2003, 2006, 2008, 2009, 2011, and 2013 exhibited a strong decoupling effect and three of the fourteen years (2005, 2007, and 2010 exhibited a weak decoupling effect. Overall, China’s TI experienced a good decoupling between economic growth and water consumption from 2002 to 2014. For the three sub-sectors, the MTWA sector experienced a more significant positive decoupling than the MT and MCF sectors. The decomposition results confirm that the industrial scale factor is the most important driving force of China’s TI water consumption increase, while the water efficiency factor is the most important inhibiting force. The industrial structure adjustment does not significantly affect water consumption. The industrial scale and water use efficiency factors are also the main determinants of change in water consumption for the three sub-sectors.

The management perspective on the performance of the irrigation subsector

NARCIS (Netherlands)

Nijman, C.

1993-01-01

INVESTMENT IN IRRIGATION has been immense in the past. Estimated average annual investments of US$ 15 billion makes irrigation the largest subsector of the agricultural sector, that is itself by far the largest sector of development investment. Since the mid-1960s the awareness spread that the

Role of Manufacturing Sector and Trade, Hotel, Restaurant Sector In East Java’s Economy: Input Output Analysis

Directory of Open Access Journals (Sweden)

Anggari Marya Kresnowati

2016-11-01

Full Text Available This study aimed to (1 analyze the relationship the manufacturing sector and the trade, hotel, and restaurant sector with other sectors in East Java, (2 to analyze the economic impact caused the two sectors based on the multiplier effect, (3 and analyze the economic impact caused by these two sectors if there additional investment funds. This study uses data analysis input output 2010 East Java 19x19 aggregation sector.The results indicate that base metals subsector has the highest linkages to other sectors. Based on household income multiplier effect, trade subsector has the greatest multiplier. Employment multiplier in trade and industrial sectors are in medium rank. This is indicates that the labor has been absorbed well in both sectors. The output multiplier effect, subsector non-metal goods, except petroleum and coal has the highest multiplier. The last, according to the analysis of investment injection simulations Input-Output East Java in 2010, subsector other processing industries has a best value added. Overall, the manufacturing sector has a better influence to East Java's economy than trade, hotel, and restaurant sector.

Manufacturing capability as a technological development indicator in the pharmaceutical industry

Directory of Open Access Journals (Sweden)

John Jairo Gallo Castro

2010-01-01

Full Text Available The pharmaceutical industrial has five subsectors: medicines, cosmetics, phytotherapeutics, cleaning products and medical devices. The medicine subsector consists of organisations producing, importing and selling these products. Most studies about this industry have been guided by economic interests without assessing technological aspects of production. This article was aimed at proposing a methodology for assessing and describing the medicine sector according to its technological development by using the manufacturing capability concept. The main information was taken from the Colombian Medicaments and Food Surveillance Institute’s (Instituto Nacional de Vigilancia de Medicamentos y Alimentos - INVIMA databases related to pharmaceutical plant production in Bogotá, including material transformation facilities. This study led to three characteristics being identified for defining the pharmaceutical industry’s manufacturing capability: that related to the pharmacological group to which active pharmaceutical ingredients belong, that linked to specifications regarding medicines’ sterility and that related to the technology required for manufacturing each pharmaceutical product. An analysis of these features has thus been presented and some technologies have been identified which have not been transferred or assimilated by the organisations being studied. It was found that manufacturing capability should be considered as being an indicator of the degree of technological development in these subsectors in Colombia.

Analysis of labour risks in the Spanish industrial aerospace sector

Directory of Open Access Journals (Sweden)

JUAN LAGUARDIA

Full Text Available ABSTRACT Labour risk prevention is an activity integrated within Safety and Hygiene at Work in Spain. In 2003, the Electronic Declaration for Accidents at Work, Delt@ (DELTA was introduced. The industrial aerospace sector is subject to various risks. Our objective is to analyse the Spanish Industrial Aerospace Sector (SIAS using the ACSOM methodology to assess its labour risks and to prioritise preventive actions. The SIAS and the Services Subsector (SS were created and the relevant accident rate data were obtained. The ACSOM method was applied through double contrast (deviation and translocation of the SIAS or SS risk polygon with the considered pattern, accidents from all sectors (ACSOM G or the SIAS. A list of risks was obtained, ordered by action phases. In the SIAS vs. ACSOM G analysis, radiation risks were the worst, followed by overstrains. Accidents caused by living beings were also significant in the SS vs. SIAE, which will be able to be used to improve Risk Prevention. Radiation is the most significant risk in the SIAS and the SS. Preventive actions will be primary and secondary. ACSOM has shown itself to be a valid tool for the analysis of labour risks.

Analysis of labour risks in the Spanish industrial aerospace sector.

Science.gov (United States)

Laguardia, Juan; Rubio, Emilio; Garcia, Ana; Garcia-Foncillas, Rafael

2016-01-01

Labour risk prevention is an activity integrated within Safety and Hygiene at Work in Spain. In 2003, the Electronic Declaration for Accidents at Work, Delt@ (DELTA) was introduced. The industrial aerospace sector is subject to various risks. Our objective is to analyse the Spanish Industrial Aerospace Sector (SIAS) using the ACSOM methodology to assess its labour risks and to prioritise preventive actions. The SIAS and the Services Subsector (SS) were created and the relevant accident rate data were obtained. The ACSOM method was applied through double contrast (deviation and translocation) of the SIAS or SS risk polygon with the considered pattern, accidents from all sectors (ACSOM G) or the SIAS. A list of risks was obtained, ordered by action phases. In the SIAS vs. ACSOM G analysis, radiation risks were the worst, followed by overstrains. Accidents caused by living beings were also significant in the SS vs. SIAE, which will be able to be used to improve Risk Prevention. Radiation is the most significant risk in the SIAS and the SS. Preventive actions will be primary and secondary. ACSOM has shown itself to be a valid tool for the analysis of labour risks.

Energy use in the Greek manufacturing sector: A methodological framework based on physical indicators with aggregation and decomposition analysis

International Nuclear Information System (INIS)

Salta, Myrsine; Polatidis, Heracles; Haralambopoulos, Dias

2009-01-01

A bottom-up methodological framework was developed and applied for the period 1985-2002, to selected manufacturing sub-sectors in Greece namely, food, beverages and tobacco, iron and steel, non-ferrous metals, non-metallic minerals and paper. Disaggregate physical data were aggregated according to their specific energy consumption (SEC) values and physical energy efficiency indicators were estimated. The Logarithmic Mean Divisia index method was also used and the effects of the production, structure and energy efficiency to changes in sub-sectoral manufacturing energy use were further assessed. Primary physical energy efficiency improved by 28% for the iron and steel and by 9% for the non-metallic minerals industries, compared to the base year 1990. For the food, beverages and tobacco and the paper sub-sectors, primary efficiency deteriorated by 20% and by 15%, respectively; finally electricity efficiency deteriorated by 7% for the non-ferrous metals. Sub-sectoral energy use is mainly driven by production output and energy efficiency changes. Sensitivity analysis showed that alternative SEC values do not influence the results whereas the selected base year is more critical for this analysis. Significant efficiency improvements refer to 'heavy' industry; 'light' industry needs further attention by energy policy to modernize its production plants and improve its efficiency

Energy use in the Greek manufacturing sector: A methodological framework based on physical indicators with aggregation and decomposition analysis

Energy Technology Data Exchange (ETDEWEB)

Salta, Myrsine; Polatidis, Heracles; Haralambopoulos, Dias [Energy Management Laboratory, Department of Environment, University of the Aegean, University Hill, Mytilene 81100 (Greece)

2009-01-15

A bottom-up methodological framework was developed and applied for the period 1985-2002, to selected manufacturing sub-sectors in Greece namely, food, beverages and tobacco, iron and steel, non-ferrous metals, non-metallic minerals and paper. Disaggregate physical data were aggregated according to their specific energy consumption (SEC) values and physical energy efficiency indicators were estimated. The Logarithmic Mean Divisia index method was also used and the effects of the production, structure and energy efficiency to changes in sub-sectoral manufacturing energy use were further assessed. Primary physical energy efficiency improved by 28% for the iron and steel and by 9% for the non-metallic minerals industries, compared to the base year 1990. For the food, beverages and tobacco and the paper sub-sectors, primary efficiency deteriorated by 20% and by 15%, respectively; finally electricity efficiency deteriorated by 7% for the non-ferrous metals. Sub-sectoral energy use is mainly driven by production output and energy efficiency changes. Sensitivity analysis showed that alternative SEC values do not influence the results whereas the selected base year is more critical for this analysis. Significant efficiency improvements refer to ''heavy'' industry; ''light'' industry needs further attention by energy policy to modernize its production plants and improve its efficiency. (author)

Energy and exergy analyses of energy consumptions in the industrial sector in South Africa

International Nuclear Information System (INIS)

Oladiran, M.T.; Meyer, J.P.

2007-01-01

The energy-utilization over a 10-year period (1994-2003) has been analysed for the South African industrial sector, which consumes more primary energy than any other sector of the economy. Four principal sub-sectors, namely iron and steel, chemical and petrochemical, mining and quarrying, and non-ferrous metals/non-metallic minerals were considered in this study. Primary-energy utilization data were used to calculate the weighted mean energy and exergy efficiencies for the sub-sectors and then overall values for the industrial sector were obtained. The results indicate that exergy efficiency is considerably lower than energy efficiency in all the sub-sectors, particularly in mining and quarrying processes, for which the values were approximately 83% and 16%, respectively. The performance of exergy utilization in the industrial sector can be improved by introducing various conservation strategies. Results from this study were compared with those for other countries

Caracterización del subsector calzado de la provincia de Tungurahua período 2010 - 2012

OpenAIRE

González Garcés, Liliana Elizabeth

2015-01-01

1.Aspectos introductorios.-- 2.Marco Teórico.-- 3.Metodología.-- 4.Caracterización del subsector calzado de la provincia de Tungurahua período 2010 -2012.-- 5.--Propuesta La actividad manufacturera del calzado se ha convertido en uno de los subsectores que más aporta a la economía del país, además es considerada por el Ministerio de Coordinación de la Producción, Empleo y Competitividad y el Gobierno Provincial de Tungurahua como actividad priorizada en la agenda de transformación de la ma...

The Energy Footprint of China’s Textile Industry: Perspectives from Decoupling and Decomposition Analysis

Directory of Open Access Journals (Sweden)

Laili Wang

2017-09-01

Full Text Available Energy is the essential input for operations along the industrial manufacturing chain of textiles. China’s textile industry is facing great pressure on energy consumption reduction. This paper presents an analysis of the energy footprint (EFP of China’s textile industry from 1991 to 2015. The relationship between EFP and economic growth in the textile industry was investigated with a decoupling index approach. The logarithmic mean Divisia index approach was applied for decomposition analysis on how changes in key factors influenced the EFP of China’s textile industry. Results showed that the EFP of China’s textile industry increased from 41.1 Mt in 1991 to 99.6 Mt in 2015. EFP increased fastest in the period of 1996–2007, with an average annual increasing rate of 7.7 percent, especially from 2001 to 2007 (8.5 percent. Manufacture of textile sector consumed most (from 58 percent to 76 percent of the energy among the three sub-sectors, as it has lots of energy-intensive procedures. EFP and economic growth were in a relative decoupling state for most years of the researched period. Their relationship showed a clear tendency toward decoupling. Industrial scale was the most important factor that led to the increase of EFP, while decreasing energy intensity contributed significantly to reducing the EFP. The promoting effect of the factors was larger than the inhibiting effect on EFP in most years from 1991 to 2015.

Value-at-Risk analysis using ARMAX GARCHX approach for estimating risk of banking subsector stock return’s

Science.gov (United States)

Dewi Ratih, Iis; Sutijo Supri Ulama, Brodjol; Prastuti, Mike

2018-03-01

Value at Risk (VaR) is one of the statistical methods used to measure market risk by estimating the worst losses in a given time period and level of confidence. The accuracy of this measuring tool is very important in determining the amount of capital that must be provided by the company to cope with possible losses. Because there is a greater losses to be faced with a certain degree of probability by the greater risk. Based on this, VaR calculation analysis is of particular concern to researchers and practitioners of the stock market to be developed, thus getting more accurate measurement estimates. In this research, risk analysis of stocks in four banking sub-sector, Bank Rakyat Indonesia, Bank Mandiri, Bank Central Asia and Bank Negara Indonesia will be done. Stock returns are expected to be influenced by exogenous variables, namely ICI and exchange rate. Therefore, in this research, stock risk estimation are done by using VaR ARMAX-GARCHX method. Calculating the VaR value with the ARMAX-GARCHX approach using window 500 gives more accurate results. Overall, Bank Central Asia is the only bank had the estimated maximum loss in the 5% quantile.

Competitive market and sources of its advantages in the electric energy subsector

Directory of Open Access Journals (Sweden)

Kazimierz Pająk

2017-07-01

Full Text Available The electric energy subsector varies considerably in terms of competitiveness depending on the area under analysis. Power generation, transmission and distribution have quite different characteristics of competitiveness than areas such as electricity trading. In the area of power generation, competitive advantage is developed by factors such as: skilful operation in the fuel market and targeted investments affecting the efficiency and effectiveness of equipment. In the area of energy distribution, despite the natural monopoly, some distribution system operators dynamically take over the market share of newly constructed networks. The area of energy trading can be successfully compared to other competitive market segments where mass sales of services and products occur.

A multi-sectoral decomposition analysis of city-level greenhouse gas emissions: Case study of Tianjin, China

International Nuclear Information System (INIS)

Kang, Jidong; Zhao, Tao; Liu, Nan; Zhang, Xin; Xu, Xianshuo; Lin, Tao

2014-01-01

To better understand how city-level greenhouse gas (GHG) emissions have evolved, we performed a multi-sectoral decomposition analysis to disentangle the GHG emissions in Tianjin from 2001 to 2009. Five sectors were considered, including the agricultural, industrial, transportation, commercial and other sectors. An industrial sub-sector decomposition analysis was further performed in the six high-emission industrial branches. The results show that, for all five sectors in Tianjin, economic growth was the most important factor driving the increase in emissions, while energy efficiency improvements were primarily responsible for the decrease in emissions. In comparison, the influences from energy mix shift and emission coefficient changes were relatively marginal. The disaggregated decomposition in the industry further revealed that energy efficiency improvement has been widely achieved in the industrial branches, which was especially true for the Smelting and Pressing of Ferrous Metals and Chemical Raw Materials and Chemical Products sub-sectors. However, the energy efficiency declined in a few branches, e.g., Petroleum Processing and Coking Products. Moreover, the increased emissions related to industrial structure shift were primarily due to the expansion of Smelting and Pressing of Ferrous Metals; its share in the total industry output increased from 5.62% to 16.1% during the examined period. - Highlights: • We perform the LMDI analysis on the emissions in five sectors of Tianjin. • Economic growth was the most important factor for the emissions increase. • Energy efficiency improvements mainly contributed to the emission decrease. • Negative energy intensity effect was observed in most of the industrial sub-sectors. • Industrial structure change largely resulted in emission increase

Modelo de evaluación de gestión de empresas industriales del subsector de empaques y envases plásticos.

Directory of Open Access Journals (Sweden)

Omar de Jesús Montilla Galvis

2005-01-01

Full Text Available El presente artículo muestra una propuesta de modelo de evaluación de gestión aplicable a las empresas industriales del subsector de empaques y envases plásticos, producto de investigación teórica y de campo, como avance del proyecto de investigación titulado Modelos de evaluación de gestión, que se realiza dentro del Grupo de Investigación en Contabilidad, Finanzas y Gestión Pública.Este avance de investigación corresponde al estudio efectuado en empresas del subsector, en el Valle del Cauca, subsector que fue seleccionado ya que representa más del 52% de la producción nacional.

The management perspective on the performance of the irrigation subsector

OpenAIRE

Nijman, C.

1993-01-01

INVESTMENT IN IRRIGATION has been immense in the past. Estimated average annual investments of US$ 15 billion makes irrigation the largest subsector of the agricultural sector, that is itself by far the largest sector of development investment. Since the mid-1960s the awareness spread that the performance of irrigation investments was far below its potential. The size of this underperformance is well represented by Seckler's alarming conclusion that the average irrigation investment costs twi...

Analisis Daya Saing Produk Agroindustri Subsektor Perkebunan dalam Perekonomian Wilayah Provinsi Jambi

Directory of Open Access Journals (Sweden)

Zulgani Zulgani

2014-11-01

Full Text Available This study aims to identify the potential competitiveness of the agro-industry sub-sector leading commodity plantations in Jambi Province. The long term goal of this research is obtained by a concrete formulation of the strategy of development of agro-industry sub-sector competitiveness leading commodity plantations integrated with the strategy of revitalizing the agricultural sector. The research method used was a secondary data analysis methods. This study was conducted over a period of two years. In the first year will be to identify potential agro industry leading commodity subsector mapping plantations and agro-industry plantation subsector superior product that has a high economic value, while the second year will be pursued to design the strategy and policy development of agro-industry commodity or superior products that possess the plantation sub-sector competitiveness and related to the realize the quality of economic growth and sustainable region. Keywords: agro-industry, the quality of economic growth, sustainable

DAMPAK SUB-SEKTOR UNGGULAN TERHADAP PEREKONOMIAN KOTA SAMARINDA: PENDEKATAN INPUT-OUTPUT

Directory of Open Access Journals (Sweden)

Jerry Pahlevy Mahakam

2015-01-01

Full Text Available In this paper, the writer would like to investigate the sub-sectors of the economy categorized as superior, potential, and non-superior, determine the magnitude of multiplier income arising from these sub-sector on household income and job opportunities, and identify the sub-sector of the economy which can be placed as a superior in Samarinda. This study employed Input-Output approach which later discovered several factors which were considered as superior, namely food and beverage industry; Paper and printing industry; electricity; construction / building; land transportation; and other services, while the sub-sectors which were included in non-superior categories were rice, cassava, vegetables, fruits, other staple food crops, plantation crops, timber and forest products, fisheries, mining, timber industry, chemical industry, hotels, telecommunications, insurance, government, education services. In addition, the results of forward and backward linkages analysis and multiplier income calculating of household income and job opportunities found that those sub-sectors of food and beverage industry, building/ construction, other services, and land transportation were categorized into major sub-sectors.

A Test for Relative Efficiency in the Smallholder Tea Sub-sector in ...

African Journals Online (AJOL)

Despite availability of tea growing technologies to all Kenya tea farmers, green leaf production in smallholder sub-sector remains low. Tea in Kenya is grown in the East of the Rift Valley and the West of the Rift Valley regions. It is assumed that tea farms behave according to a certain decision rule termed as profit ...

Manufacturing processes in the textile industry. Expert Systems for fabrics production

Directory of Open Access Journals (Sweden)

Juan BULLON

2017-03-01

Full Text Available The textile industry is characterized by the economic activity whose objective is the production of fibres, yarns, fabrics, clothing and textile goods for home and decoration,as well as technical and industrial purposes. Within manufacturing, the Textile is one of the oldest and most complex sectors which includes a large number of sub-sectors covering the entire production cycle, from raw materials and intermediate products, to the production of final products. Textile industry activities present different subdivisions, each with its own traits. The length of the textile process and the variety of its technical processes lead to the coexistence of different sub-sectors in regards to their business structure and integration. The textile industry is developing expert systems applications to increase production, improve quality and reduce costs. The analysis of textile designs or structures includes the use of mathematical models to simulate the behavior of the textile structures (yarns, fabrics and knitting. The Finite Element Method (FEM has largely facilitated the prediction of the behavior of that textile structure under mechanical loads. For classification problems Artificial Neural Networks (ANNs haveproved to be a very effective tool as a quick and accurate solution. The Case-Based Reasoning (CBR method proposed in this study complements the results of the finite element simulation, mathematical modeling and neural networks methods.

Modelo para evaluación de gestión de empresas industriales del subsector cosméticos

Directory of Open Access Journals (Sweden)

Omar de Jesús Montilla Galvis

2004-01-01

Full Text Available El presente artículo muestra una propuesta de modelo de evaluación de gestión aplicable a las empresas industriales del subsector de cosméticos, producto de investigación teórica y de campo, como avance del proyecto de investigación titulado Modelos de evaluación de gestión, que se realiza dentro del Grupo de Investigación en Contabilidad, Finanzas y Gestión Pública. Este primer avance de investigación corresponde al estudio realizado en empresas industriales del subsector de cosméticos en el Valle del Cauca.

Industrial companies' demand for electricity. Evidence from a micropanel

International Nuclear Information System (INIS)

Bjoerner, T.B.; Togeby, M.; Jensen, H.H.

2001-01-01

The paper presents a micro-econometric analysis of industrial companies' demand for electricity. Previous studies on electricity consumption in the industrial sector have relied on aggregate data or cross-section observations. Here we present an econometric study on electricity demand based on a panel of 2949 Danish companies followed from 1983 to 1996. It is found that estimators of electricity demand that take account of the panel structure (fixed effect models) yield considerably lower price and production elasticities compared to estimators that do not (like cross-section models). It is also investigated how various company characteristics like size, type of industrial sub-sector and electricity intensity in production influence price and production elasticities. It appears that companies with a high electricity intensity also have a high own-price elasticity

Energy consumption in the industrial sector. Evolution and perspectives; Consumo energetico en el sector industrial. Evolucion y perspectivas

Energy Technology Data Exchange (ETDEWEB)

Vieyra Fernandez, Arturo; Cortes Mendez, Carlos

1993-12-31

This article has the purpose of analyzing the main determinants of energy use in the industrial sector, standing out the economical, social and technological implications that determine a specific consumption pattern, departing from which, -as first hand indicators- the efficiency conditions under which this consumption is effected, are evaluated. Likewise, a break-up by branch for the analysis is proposed, taking as a reference point the importance of each one of these in the sector global consumption as well as the available information for each one of them. Finally, the execution of a prospective with an horizon to the year 2005, taking into consideration a macroeconomic scenario, in general, and the potential saving for each sub-sector, in particular, is proposed. [Espanol] El articulo tiene como finalidad analizar los determinantes principales del consumo energetico del sector industrial, destacando las implicaciones de caracter economico, social y tecnologico que conlleva a un patron especifico de consumo, a partir del cual se evaluan - con indicadores de primera mano - las condiciones de eficiencia bajo las cuales se realiza dicho consumo. Asimismo, se propone una desagregacion por rama para el analisis, tomando como punto de referencia la importancia de cada una de estas en el consumo global del sector, asi como la informacion disponible para cada una. Finalmente, se propone un ejercicio de prospectiva con un horizonte hasta el ano 2005 tomando en consideracion un escenario macroeconomico en general y el potencial de ahorro para cada subsector en particular.

Energy consumption in the industrial sector. Evolution and perspectives; Consumo energetico en el sector industrial. Evolucion y perspectivas

Energy Technology Data Exchange (ETDEWEB)

Vieyra Fernandez, Arturo; Cortes Mendez, Carlos

1992-12-31

This article has the purpose of analyzing the main determinants of energy use in the industrial sector, standing out the economical, social and technological implications that determine a specific consumption pattern, departing from which, -as first hand indicators- the efficiency conditions under which this consumption is effected, are evaluated. Likewise, a break-up by branch for the analysis is proposed, taking as a reference point the importance of each one of these in the sector global consumption as well as the available information for each one of them. Finally, the execution of a prospective with an horizon to the year 2005, taking into consideration a macroeconomic scenario, in general, and the potential saving for each sub-sector, in particular, is proposed. [Espanol] El articulo tiene como finalidad analizar los determinantes principales del consumo energetico del sector industrial, destacando las implicaciones de caracter economico, social y tecnologico que conlleva a un patron especifico de consumo, a partir del cual se evaluan - con indicadores de primera mano - las condiciones de eficiencia bajo las cuales se realiza dicho consumo. Asimismo, se propone una desagregacion por rama para el analisis, tomando como punto de referencia la importancia de cada una de estas en el consumo global del sector, asi como la informacion disponible para cada una. Finalmente, se propone un ejercicio de prospectiva con un horizonte hasta el ano 2005 tomando en consideracion un escenario macroeconomico en general y el potencial de ahorro para cada subsector en particular.

Energy efficiency in the industrial sector. Model based analysis of the efficient use of energy in the EU-27 with focus on the industrial sector

International Nuclear Information System (INIS)

Kuder, Ralf

2014-01-01

of the industry could be split up into energy intensive subsectors where single production processes dominate the energy consumption, and non-energy intensive subsectors. Ways to reduce the energy consumption in the industrial sector are the use of alternative or improved production or cross cutting technologies and the use of energy saving measures to reduce the demand for useable energy. Based on the analysis within this study, 21 % of the current energy consumption of the industrial sector of the EU and 17 % in Germany could be reduced. Based on the extended understanding of energy efficiency, the model based scenario analysis of the European energy system with the further developed energy system model TIMES PanEU shows that the efficient use of energy at an emission reduction level of 75 % is a slightly increasing primary energy consumption. The primary energy consumption is characterised by a diversified energy carrier and technology mix. Renewable energy sources, nuclear energy and CCS play a key role in the long term. In addition the electricity demand in combination with a strong decarbonisation of the electricity generation is increasing constantly. In the industrial sector the emission reduction is driven by the extended use of electricity, CCS and renewables as well as by the use of improved or alternative process and supply technologies with lower specific energy consumption. Thereby the final energy consumption stays almost on a constant level with increasing importance of electricity and biomass. Both regulatory interventions in the electricity sector and energy saving targets on the primary energy demand lead to higher energy system costs and therewith to a decrease of efficiency based on the extended understanding. The energy demand is reduced stronger than it is efficient and the saving targets lead to the extended use of other resources resulting in totally higher costs. The integrated system analysis in this study points out the interactions

Energy shocks and detecting influential industries

International Nuclear Information System (INIS)

Kang, Dongsuk; Lee, Duk Hee

2017-01-01

An industry's relationship of supply and demand with the energy sector can be a critical factor in the stability of its economic performance. Furthermore, the patterns of industry dependence on energy industries can be a major characteristic of entire industrial structure. This research evaluates industries' impact scores for their overall influence on other industries and vulnerability to supply and demand shocks from the energy sector. The study utilizes a sample of Korea's industrial input–output tables from 2010 to 2012. Using a chain of complementary methodologies, this study finds that among four clusters, energy, services, and raw materials are key members that can spread energy shocks to other industries. Therefore, governments need to prepare effective energy efficiency policies for these target industries. - Highlights: • We analyze an industry's impact score of its vulnerability to energy shock and inter-industrial effects. • We utilize the sample of input-output tables in Korea from 2010 to 2012. • We implement simulation, PCA, TOPSIS, cluster analysis about energy shock and industrial trades. • Subsectors of energy, services, raw material are subject to energy shock and influential to others. • These bridge industries can be targets that require policies for effective energy efficiency.

Manufacturing processes in the textile industry. Expert Systems for fabrics production

OpenAIRE

Bullon, Juan; González Arrieta, Angélica; Hernández Encinas, Ascensión; Queiruga Dios, Araceli

2017-01-01

The textile industry is characterized by the economic activity whose objective is the production of fibres, yarns, fabrics, clothing and textile goods for home and decoration,as well as technical and industrial purposes. Within manufacturing, the Textile is one of the oldest and most complex sectors which includes a large number of sub-sectors covering the entire production cycle, from raw materials and intermediate products, to the production of final products. Textile industry activities pr...

Public funding and private investment for R&D: a survey in China's pharmaceutical industry.

Science.gov (United States)

Qiu, Lan; Chen, Zi-Ya; Lu, Deng-Yu; Hu, Hao; Wang, Yi-Tao

2014-06-13

In recent years, China has experienced tremendous growth in its pharmaceutical industry. Both the Chinese government and private investors are motivated to invest into pharmaceutical research and development (R&D). However, studies regarding the different behaviors of public and private investment in pharmaceutical R&D are scarce. Therefore, this paper aims to investigate the current situation of public funding and private investment into Chinese pharmaceutical R&D. The primary data used in the research were obtained from the China High-tech Industry Statistics Yearbook (2002-2012) and China Statistical Yearbook of Science and Technology (2002-2012). We analyzed public funding and private investment in five aspects: total investment in the industry, funding sources of the whole industry, differences between provinces, difference in subsectors, and private equity/venture capital investment. The vast majority of R&D investment was from private sources. There is a significantly positive correlation between public funding and private investment in different provinces of China. However, public funding was likely to be invested into less developed provinces with abundant natural herbal resources. Compared with the chemical medicine subsector, traditional Chinese medicine and biopharmaceutical subsectors obtained more public funding. Further, the effect of the government was focused on private equity and venture capital investment although private fund is the mainstream of this type of investment. Public funding and private investment play different but complementary roles in pharmaceutical R&D in China. While being less than private investment, public funding shows its significance in R&D investment. With rapid growth of the industry, the pharmaceutical R&D investment in China is expected to increase steadily from both public and private sources.

Stock return, seasonality and asymmetric conditional volatility in steel & iron subsector

Directory of Open Access Journals (Sweden)

V. Chirila

2015-01-01

Full Text Available This paper presents the results obtained following the testing of five hypotheses regarding conditional return and volatility of the most listed European stocks in the steel & iron subsector. The following elements of the stocks are analysed: time variation of volatility, seasonality of return and volatility, relationship between return and volatility and volatility asymmetry. The results obtained confirm for all the analyzed stocks the existence of volatility variation in time, the lack of correlation between return and volatility, the existence of asymmetry phenomenon of volatility and the presence in some stocks of the seasonality effect both for return and volatility.

Workers' compensation claims for musculoskeletal disorders among wholesale and retail trade industry workers--Ohio, 2005-2009.

Science.gov (United States)

2013-06-07

Work-related musculoskeletal disorders (WMSDs) resulting from ergonomic hazards are common in the United States. Recent data from the Bureau of Labor Statistics (BLS) indicate that in 2011, one third of occupational injuries and illnesses resulting in lost time from work were WMSDs. Based on data from the 2010 BLS Survey of Occupational Injuries and Illnesses, a higher rate of WMSDs resulting in lost time from work occurred in the Wholesale and Retail Trade (WRT) industry compared with most other industries. To assess trends and identify WRT subsectors and subgroups associated with high rates of WMSD workers' compensation claims, the Ohio Bureau of Workers' Compensation (OBWC) and CDC analyzed OBWC claims data for single-location WRT employers in Ohio for the period 2005-2009. From 2005 to 2009, the rate of WMSD claims declined from 86.3 to 52.8 per 10,000 employees. The three WRT industry subsectors with the highest rates of WMSD claims were Merchant Wholesalers, Nondurable Goods; Furniture and Home Furnishings Stores; and Merchant Wholesalers, Durable Goods. Within those three WRT subsectors, the highest rates of WMSD claims were noted in five subgroups: furniture stores and wholesalers of alcoholic beverages, groceries and related products, metal and minerals, and motor vehicle parts. Providing recommendations for WMSD prevention is particularly important for these WRT subgroups.

Public funding and private investment for R&D: a survey in China’s pharmaceutical industry

Science.gov (United States)

2014-01-01

Background In recent years, China has experienced tremendous growth in its pharmaceutical industry. Both the Chinese government and private investors are motivated to invest into pharmaceutical research and development (R&D). However, studies regarding the different behaviors of public and private investment in pharmaceutical R&D are scarce. Therefore, this paper aims to investigate the current situation of public funding and private investment into Chinese pharmaceutical R&D. Methods The primary data used in the research were obtained from the China High-tech Industry Statistics Yearbook (2002–2012) and China Statistical Yearbook of Science and Technology (2002–2012). We analyzed public funding and private investment in five aspects: total investment in the industry, funding sources of the whole industry, differences between provinces, difference in subsectors, and private equity/venture capital investment. Results The vast majority of R&D investment was from private sources. There is a significantly positive correlation between public funding and private investment in different provinces of China. However, public funding was likely to be invested into less developed provinces with abundant natural herbal resources. Compared with the chemical medicine subsector, traditional Chinese medicine and biopharmaceutical subsectors obtained more public funding. Further, the effect of the government was focused on private equity and venture capital investment although private fund is the mainstream of this type of investment. Conclusions Public funding and private investment play different but complementary roles in pharmaceutical R&D in China. While being less than private investment, public funding shows its significance in R&D investment. With rapid growth of the industry, the pharmaceutical R&D investment in China is expected to increase steadily from both public and private sources. PMID:24925505

CO2 emissions and reduction potential in China's chemical industry

International Nuclear Information System (INIS)

Zhu, Bing; Zhou, Wenji; Hu, Shanying; Li, Qiang; Griffy-Brown, Charla; Jin, Yong

2010-01-01

GHG (Increasing greenhouse gas) emissions in China imposes enormous pressure on China's government and society. The increasing GHG trend is primarily driven by the fast expansion of high energy-intensive sectors including the chemical industry. This study investigates energy consumption and CO 2 emissions in the processes of chemical production in China through calculating the amounts of CO 2 emissions and estimating the reduction potential in the near future. The research is based on a two-level perspective which treats the entire industry as Level one and six key sub-sectors as Level two, including coal-based ammonia, calcium carbide, caustic soda, coal-based methanol, sodium carbonate, and yellow phosphorus. These two levels are used in order to address the complexity caused by the fact that there are more than 40 thousand chemical products in this industry and the performance levels of the technologies employed are extremely uneven. Three scenarios with different technological improvements are defined to estimate the emissions of the six sub-sectors and analyze the implied reduction potential in the near future. The results highlight the pivotal role that regulation and policy administration could play in controlling the CO 2 emissions by promoting average technology performances in this industry.

Construcción y arquitectura industrial para el siglo XXI: un análisis preliminar

Directory of Open Access Journals (Sweden)

del Caño Gochí, A.

2001-06-01

Full Text Available This paper presents a preliminary analysis, performed by the authors. on the past, present and possible future of the main issues related to the design and construction of industrial complexes. Among others. those issues include the industrial development; structural analysis and design methods; design tools; construction materials; structural types; types of non-structural systems (façade, Roof, building services; technology of construction processes; precast and industrialized systems; construction project management; construction labour; energy-related features of the industrial complexes; methodologies, technology and labour for manufacturing; environmental issues; aesthetics; planning of industrial areas (industrial parks. technology parks; industrial plants location. Some conclusions are specific to the design and construction of industrial complexes, whereas other are common to the other construction subsectors.El presente artículo expone un análisis preliminar realizado por los autores sobre la evolución histórica de los principales aspectos de la construcción y arquitectura industrial, así como de las posibles líneas que podría seguir la evolución a futuro de cada uno de dichos aspectos. Los aspectos analizados son: el desarrollo industrial; los métodos de cálculo y dimensionamiento estructural; las herramientas de diseño; los materiales de construcción; las tipologías estructurales; los sistemas constructivos no estructurales; la tecnología de los procesos constructivos; la prefabricación e industrialización; la organización y dirección del proyecto; la mano de obra para la construcción; los aspectos energéticos; las tecnologías y filosofías de fabricación y su mano de obra; el respeto al medio ambiente; la estética; el urbanismo industrial; y otros aspectos como la seguridad, la recuperación de construcciones industriales históricas, o la localización y emplazamiento, entre otros. Algunas de las

An energy efficiency plan for the Iranian building sub-sector

International Nuclear Information System (INIS)

Sadegh Zadeh, S.M.

2007-01-01

The objective of this paper is to develop a 25-year least cost plan for energy management in the Iranian building sub-sector. For this purpose, an energy flow optimization from the point where the final energy is delivered to consumers, until the useful energy and energy services point is investigated. This will help to select the most economically feasible technologies as well as energy carriers considering all technical and social constraints. Based on the optimization results, absorption cooling for the regions where natural gas network is available, grades A and B evaporative coolers and air conditioners for those areas where there is no gas service, gas fired heating systems, wall insulation, double-glazed windows, equipments and appliances with highest energy labelling grade and compact and non-compact fluorescent lamps are among the selections. The results of the sensitivity analysis indicates that if the cost of natural gas network development to the regions where there is no gas will result in the tripling rate of the actual cost of the natural gas, in those areas, the priority should be still given to the consumption of gas. The proposed energy efficiency plan results in 27%, 54% and 10% saving in energy consumption, energy cost and investment cost, respectively

Energy use and CO2 emissions of China's industrial sector from a global perspective

International Nuclear Information System (INIS)

Zhou, Sheng; Kyle, G. Page; Yu, Sha; Clarke, Leon E.; Eom, Jiyong; Luckow, Patrick; Chaturvedi, Vaibhav; Zhang, Xiliang; Edmonds, James A.

2013-01-01

The industrial sector has accounted for more than 50% of China's final energy consumption in the past 30 years. Understanding the future emissions and emissions mitigation opportunities depends on proper characterization of the present-day industrial energy use, as well as industrial demand drivers and technological opportunities in the future. Traditionally, however, integrated assessment research has handled the industrial sector of China in a highly aggregate form. In this study, we develop a technologically detailed, service-oriented representation of 11 industrial subsectors in China, and analyze a suite of scenarios of future industrial demand growth. We find that, due to anticipated saturation of China's per-capita demands of basic industrial goods, industrial energy demand and CO 2 emissions approach a plateau between 2030 and 2040, then decrease gradually. Still, without emissions mitigation policies, the industrial sector remains heavily reliant on coal, and therefore emissions-intensive. With carbon prices, we observe some degree of industrial sector electrification, deployment of CCS at large industrial point sources of CO 2 emissions at low carbon prices, an increase in the share of CHP systems at industrial facilities. These technological responses amount to reductions of industrial emissions (including indirect emission from electricity) are of 24% in 2050 and 66% in 2095. - Highlights: • Eleven industrial subsectors in China are detail analyzed from a global perspective. • Industrial energy use and CO 2 emissions will approach a plateau between 2030 and 2040. • Industrial CHP and CCS are truly encouraged by carbon tax. • Some degree of industrial sector electrification are observed by carbon tax

Multi-perspective comparisons and mitigation implications of SO2 and NO x discharges from the industrial sector of China: a decomposition analysis.

Science.gov (United States)

Jia, Junsong; Gong, Zhihai; Gu, Zhongyu; Chen, Chundi; Xie, Dongming

2018-04-01

This study is the first attempt to investigate the drivers of Chinese industrial SO 2 and NO x emissions from both periodic and structural perspectives through a decomposition analysis using the logarithmic mean Divisia index (LMDI). The two pollutants' emissions were decomposed into output effects, structural effects, clean production effects, and pollution abatement effects. The results showed that China's industrial SO 2 discharge increased by 1.14 Mt during 2003-2014, and the contributions from the four effects were 23.17, - 1.88, - 3.80, and - 16.36 Mt, respectively. Likewise, NO x discharge changed by - 3.44 Mt over 2011-2014, and the corresponding contributions from the four effects were 2.97, - 0.62, - 1.84, and - 3.95 Mt. Thus, the output effect was mainly responsible for the growth of the two discharges. The average annual contribution rates of SO 2 and NO x from output were 14.33 and 5.97%, respectively, but pollution abatement technology presented the most obvious mitigating effects (- 10.11 and - 7.92%), followed by the mitigating effects of clean production technology (- 2.35 and - 3.7%), and the mitigation from the structural effect was the weakest (- 1.16 and - 1.25%, respectively), which meant pollutant reduction policies related to industrial structure adjustment should be a long-term measure for the two discharges. In addition, the sub-sectors of I20 (manufacture of raw chemical materials and chemical products), I24 (manufacture of non-metallic mineral products), and I26 (smelting and pressing of non-ferrous metals) were the major contributors to both discharges. Thus, these sub-sectors should be given priority consideration when designing mitigation-related measures. Last, some particular policy implications were recommended for reducing the two discharges, including that the government should seek a technological discharge reduction route.

50 CFR 600.1105 - Longline catcher processor subsector of the Bering Sea and Aleutian Islands (BSAI) non-pollock...

Science.gov (United States)

2010-10-01

.... (b) Definitions. Unless otherwise defined in this section, the terms defined in § 600.1000 of subpart... will examine applications for completeness and inconsistencies, whether on the face of the documents or... Subsector Member shall not affect the validity of the Reduction Agreement with respect to any other...

Energy efficiency in the industrial sector. Model based analysis of the efficient use of energy in the EU-27 with focus on the industrial sector; Energieeffizienz in der Industrie. Modellgestuetzte Analyse des effizienten Energieeinsatzes in der EU-27 mit Fokus auf den Industriesektor

Energy Technology Data Exchange (ETDEWEB)

Kuder, Ralf

2014-01-09

subsectors of the industry could be split up into energy intensive subsectors where single production processes dominate the energy consumption, and non-energy intensive subsectors. Ways to reduce the energy consumption in the industrial sector are the use of alternative or improved production or cross cutting technologies and the use of energy saving measures to reduce the demand for useable energy. Based on the analysis within this study, 21 % of the current energy consumption of the industrial sector of the EU and 17 % in Germany could be reduced. Based on the extended understanding of energy efficiency, the model based scenario analysis of the European energy system with the further developed energy system model TIMES PanEU shows that the efficient use of energy at an emission reduction level of 75 % is a slightly increasing primary energy consumption. The primary energy consumption is characterised by a diversified energy carrier and technology mix. Renewable energy sources, nuclear energy and CCS play a key role in the long term. In addition the electricity demand in combination with a strong decarbonisation of the electricity generation is increasing constantly. In the industrial sector the emission reduction is driven by the extended use of electricity, CCS and renewables as well as by the use of improved or alternative process and supply technologies with lower specific energy consumption. Thereby the final energy consumption stays almost on a constant level with increasing importance of electricity and biomass. Both regulatory interventions in the electricity sector and energy saving targets on the primary energy demand lead to higher energy system costs and therewith to a decrease of efficiency based on the extended understanding. The energy demand is reduced stronger than it is efficient and the saving targets lead to the extended use of other resources resulting in totally higher costs. The integrated system analysis in this study points out the interactions

Future Skills Requirements of the International Digital Media Industry: Implications for Ireland, July 2006

OpenAIRE

2006-01-01

This report profiles the skill requirements of some of the world’s leading Digital Media firms. It details the skills required in key occupational roles across seven sub-sectors of the industry. These findings will help education and training providers in Ireland keep their curricula and programmes up-to-date with developments in the industry and thereby maximise employment opportunities for their graduates. This report will also serve as a resource for Irish firms in the industry. By identif...

Medición de la eficiencia relativa en tres subsectores de la economía colombiana desde 1993 a 1999 utilizando Data Envelopment Analysis (D.E.A.

Directory of Open Access Journals (Sweden)

Gloria Isabel Rodríguez Lozano

2003-06-01

Full Text Available Mediante la metodología del Data Envelopment Analysis (D.E.A, la cual permite determinar el desempeño relativo de distintas unidades organizacionales ante la presencia de múltiples entradas y salidas, el presente artículo desarrolla el estudio de tres subsectores de la economía Colombiana entre 1993 y 1999, estableciendo el desempeño comparativo entre diferentes empresas de un mismo sector, determinando de esta manera cuáles de ellas hacen el mejor uso de sus recursos. Así mismo, se identifican características de la eficiencia que no serían consideradas bajo el esquema del cálculo de razones financieras, demostrando que las empresas con mejores márgenes operacionales y/o netos, no son necesariamente las más eficientes.

2008 Industrial Technologies Market Report, May 2009

Energy Technology Data Exchange (ETDEWEB)

Energetics; DOE

2009-07-01

The industrial sector is a critical component of the U.S. economy, providing an array of consumer, transportation, and national defense-related goods we rely on every day. Unlike many other economic sectors, however, the industrial sector must compete globally for raw materials, production, and sales. Though our homes, stores, hospitals, and vehicles are located within our borders, elements of our goods-producing industries could potentially be moved offshore. Keeping U.S. industry competitive is essential to maintaining and growing the U.S. economy. This report begins with an overview of trends in industrial sector energy use. The next section of the report focuses on some of the largest and most energy-intensive industrial subsectors. The report also highlights several emerging technologies that could transform key segments of industry. Finally, the report presents policies, incentives, and drivers that can influence the competitiveness of U.S. industrial firms.

Consumo de insumos agroindustriales por el subsector panificador de Palmira, Valle del Cauca. Indicadores de subsistemas Administrativo, Talento Humano y Operativo Consumption of agro-industrial supplies by the baker subsector of Palmira, Valle, Colombia . Indicators of administrative, operative and human talent subsystems

Directory of Open Access Journals (Sweden)

Wilson Adarme J

2007-06-01

Full Text Available Los indicadores de consumo agroindustrial en las Pymes del subsector panificador resultan apremiantes para el diseño de estrategias de sostenibilidad para los pequeños artesanos del pan. Se evaluaron los subsistemas administrativos, talento humano y operativo en 30 de las 178 organizaciones que conformaron el subsistema panificador de Palmira en el 2005. El consumo estimado anual para el 2004 de harina de trigo fue 2.016 t; 348 t de azúcar; 240 t de queso; 54 t de sal; 492 t de margarina; 99 t de levadura; 151.200 paneles de huevos. En materias primas auxiliares consume 384.000 m3 de gas natural; 1.2 millones de kw de energía eléctrica y 156.000 m3 de agua. El sector genera 681 empleos directos. Se presenta mapa con la ubicación del 86% de las panaderías registradas en la Cámara de Comercio. No existe una sola panadería que en forma integral haya implementado un programa de Buenas Prácticas de Manufactura-BPM, que cumpla con las normas del (INVIMA, que disponga de un sistema de Análisis de Peligros y Puntos Críticos de Control (HACCP, que esté certificada con normas sobre aseguramiento de calidad (ISO 9000, y/o Gestión Ambiental (ISO 14000, con programas de salud ocupacional (OHSAS 18000 y programas de mejora permanente en aspectos administrativos y comerciales.The indicators of agroindustrial consumption in the bakers subsector Pymes play a primary role for designing sustainable strategies for the small craftsman of bread. The administrative, operative and human talent subsystems were evaluated, in 30 of 178 organizations that conformed the bakers subsystems of Palmira on 2005. The estimated annual consumption of wheat flour on 2004 was 2016 t; 348 t of sugar; 240 t of cheese; 54 t of salt; 492 t of margarine; 99 t of yeast; 151200 panels of eggs. With regarding to raw materials it consumes 384000 m3 of natural gas; 1.2 million kw of electric power and 156000 m3 of water. The sector generates 681 direct employments. Map is

Efficiency and Import Penetrationon the Productivity of Textile Industry and Textile Products

Directory of Open Access Journals (Sweden)

Catur Basuki Rakhmawan

2012-12-01

Full Text Available Although textile industry and textile products belong to the strategic sub-sector of manufacturing industry in Indonesia, they are facing problems on the availability of energy, old production machines, and the flooding of imported products into the domestic market. This study is aimed to analyze the efficiency and productivity as performance indicators and how the efficiency and import penetration affect the productivity of textile industry and textile products. The methods of data analysis used in this research are divided in two phases. The first phase, the non-metric approach of Data Envelopment Analysis (DEA is applied to measure the efficiency and productivity. Secondly, the fixed effect model of econometric regression approach is used to find out the effects of efficiency and import penetration on the productivity of textile industry and textile products. The result shows that the ave-rage level of efficiency of textile industry and textile products during the period of 2004 – 2008 is about 40 percent with a growth rate of average productivity increases 2.4 percent. Whereas, the econometric estimation results indicate that the increase of efficiency will positively and significantly affect the productivity of textile industry and textile products. On the other hand, the increase of import penetration will negatively affect the productivity of this industry.

Análisis retrospectivo de los proyectos de ciencia, tecnología e innovación del subsector pecuario financiados por Colciencias, 1991-2010

Directory of Open Access Journals (Sweden)

Mónica María Baquero Parra

2012-12-01

Full Text Available Entre las herramientas que ofrece Colciencias para lograr sus objetivos como entidad rectora del Sistema Nacional de Ciencia, Tecnología e Innovación, se encuentran las convocatorias públicas. El objetivo del presente trabajo es identificar y analizar los proyectos financiados por Colciencias durante el periodo 1991-2010 en temáticas correspondientes al subsector pecuario. Para esto se empleó la base de datos de registro de proyectos de Colciencias, a fin de identificar los proyectos del subsector pecuario financiados desde 1991 hasta el 2010. De cada proyecto se identificó el área temática, la especie animal objeto del proyecto, el tipo de entidad ejecutora, el departamento de ejecución y el programa nacional responsable del seguimiento. Durante el periodo de interés, Colciencias financió 4839 proyectos, de los cuales 218 corresponden al subsector pecuario, siendo el 2009 el año con un mayor número de proyectos financiados (23 en este subsector. El área temática con un mayor número de proyectos financiados es acuicultura y pesca seguida de sanidad animal y sistemas de producción, con 86, 39 y 24 proyectos financiados, respectivamente. Las especies objeto del mayor número de proyectos financiados fueron las acuáticas (86 proyectos y los bovinos (80 proyectos. Las entidades ejecutoras fueron en su mayoría universidades públicas, seguidas por institutos de investigación y CENI; los departamentos de ejecución fueron Bogotá, Antioquia y Cundinamarca con 29,55, 13,64 y 13,64 %, respectivamente. Finalmente, los programas nacionales que hicieron seguimiento a un mayor número de proyectos son agropecuario, mar y recursos hidrobiológicos y biotecnología.

Assessment of the energy requirements and selected options facing major consumers within the Egyptian industrial and agricultural sectors. Final report

Energy Technology Data Exchange (ETDEWEB)

1978-05-31

The objectives of the energy assessment study of Egypt are to develop an understanding of the current status of the principal energy users in Egypt's industrial and agricultural sectors; to estimate the energy demand and efficiency for each selected subsector within these major sectors; to identify opportunities for fuel type changes, technology switches, or production pattern changes which might increase the efficiency with which Egypt's energy is used both now and in the future: and based on options identified, to forecast energy efficiencies for selected Egyptian subsectors for the years 1985 and 2000. Study results are presented for the iron and steel, aluminium, fertilizer, chemical, petrochemical, cement, and textile industries and automotive manufacturers. Study results for drainage, irrigation, and mechanization procedures in the agricultural sector and food processing sector are also presented. (MCW)

Analysis of energy use in building services of the industrial sector in California: A literature review and a preliminary characterization

Energy Technology Data Exchange (ETDEWEB)

Akbari, H.; Borgers, T.; Gadgil, A.; Sezgen, O.

1991-04-01

Energy use patterns in many of California's fastest-growing industries are not typical of those in the mix of industries elsewhere in the US. Many California firms operate small and medium-sized facilities, often in buildings used simultaneously or interchangeably for commercial (office, retail, warehouse) and industrial activities. In these industrial subsectors, the energy required for building services'' to provide occupant comfort and necessities (lighting, HVAC, office equipment, computers, etc.) may be at least as important as the more familiar process energy requirements -- especially for electricity and on-peak demand. In this report, published or unpublished information on energy use for building services in the industrial sector have been compiled and analyzed. Seven different sources of information and data relevant to California have been identified. Most of these are studies and/or projects sponsored by the Department of Energy, the California Energy Commission, and local utilities. The objectives of these studies were diverse: most focused on industrial energy use in general, and, in one case, the objective was to analyze energy use in commercial buildings. Only one of these studies focused directly on non-process energy use in industrial buildings. Our analysis of Northern California data for five selected industries shows that the contribution of total electricity consumption for lighting ranges from 9.5% in frozen fruits to 29.1% in instruments; for air-conditioning, it ranges from nonexistent in frozen fruits to 35% in instrument manufacturing. None of the five industries selected had significant electrical space heating. Gas space heating ranges from 5% in motor vehicles facilities to more than 58% in the instrument manufacturing industry. 15 refs., 15 figs., 9 tabs.

Efficiency and Import Penetration on the Productivity of Textile Industry and Textile Products

Directory of Open Access Journals (Sweden)

Catur Basuki Rakhmawan

2012-12-01

Full Text Available Although textile industry and textile products belong to the strategic sub-sector of manufacturing industry in Indonesia, they are facing problems on the availability of energy, old production machines, and the flooding of imported products into the domestic market. This study is aimed to analyze the efficiency and productivity as performance indicators and how the efficiency and import penetration affect the productivity of textile industry and textile products. The methods of data analysis used in this research are divided in two phases. The first phase, the non-metric approach of Data Envelopment Analysis (DEA is applied to measure the efficiency and productivity. Secondly, the fixed effect model of econometric regression approach is used to find out the effects of efficiency and import penetration on the productivity of textile industry and textile products. The result shows that the average level of efficiency of textile industry and textile products during the period of 2004 – 2008 is about 40 percent with a growth rate of average productivity increases 2.4 percent. Whereas, the econometric estimation results indicate that the increase of efficiency will positively and significantly affect the productivity of textile industry and textile products. On the other hand, the increase of import penetration will negatively affect the productivity of this industry.

An AHP decision making model for optimal allocation of energy subsidy among socio-economic subsectors in Iran

International Nuclear Information System (INIS)

Sadeghi, Mehdi; Ameli, Ahmad

2012-01-01

This paper presents an analytical hierarchy process (AHP) decision model for sectoral allocation of energy subsidy based on several criteria. With determination of priorities for these criteria through questionnaire and AHP method, the overall rank of these criteria that have the most influence on distribution of energy subsidy among socio-economic sub-sectors, are as the following: inflation, economic growth, labor intensity, distribution of energy subsidy among socio-economic levels, energy intensity and social cost of air pollution. According to the model, the first priority for allocation of energy subsidy is commercial sector and the last priority is related to transportation sector. Investigating the impact of changing priority of the criteria on overall results indicates that the socio-economic sub sectors’ ranking in receiving subsidy have little sensitivity for changing priority of the subsidy criteria. - Highlights: ► Commerce subsector is the best sub sector with an overall priority score of 0.331. ► The first priority for allocation of energy subsidy is commercial sector. ► When we increase the priority of each criterion first time, then overall rank of the outcome has little changing. ► The socio-economic sub sectors' ranking in receiving subsidy have little sensitivity for changing priority of the subsidy criteria.

Occupational injuries and diseases in Alberta : lost-time claims, disabling injury claims and claim rates in the upstream oil and gas industries, 2002 to 2006

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-07-01

Alberta Employment, Immigration and Industry (EII) prepares an annual report of the occupational injuries and diseases in the upstream oil and gas industries operating in the province. The purpose is to determine if the industries meet the demand from industry and safety association, labour organizations, employers and workers to improve workplace health and safety. This report described programs and initiatives undertaken by EII in pursuit of these goals. It analyzed provincial occupational injury and disease information against national statistics and estimated the risk of injury or disease at the provincial, industry sector and sub-sector level. The report also presented an analysis of aggregate injury claim data to allow for the tracking of workplace health and safety performance over time. For comparative purposes, 2006 data was presented beside 2005 data. Additional historical data was presented in some cases. It was noted that approximately 80 per cent of employed persons in Alberta are covered by the Workman's Compensation Board (WCB). Therefore, this report focused on all industry activity in Alberta covered by the WCB and by the provincial legislation of occupational health and safety. General descriptions about the incidents and injured workers were presented along with fatality rates for the major industry sectors as well as the occupational fatalities that the Workers Compensation Board (WCB) accepted for compensation. The number of employers that earned a certificate of recognition was also identified. Injury and disease analysis was discussed in terms of injured worker characteristics; nature of injury or disease; source of injury or disease; type of event or exposure; and, duration of disability. It was shown that the lost-time claim rate for the upstream oil and gas industries in Alberta decreased by 10 per cent in 2006, due to fewer injury claims. The disabling injury rate decreased by 4.9 per cent. The tar sand subsector had the lowest lost

Current and future industrial energy service characterizations

Energy Technology Data Exchange (ETDEWEB)

Krawiec, F.; Thomas, T.; Jackson, F.; Limaye, D.R.; Isser, S.; Karnofsky, K.; Davis, T.D.

1980-10-01

Current and future energy demands, end uses, and cost used to characterize typical applications and resultant services in the industrial sector of the United States and 15 selected states are examined. A review and evaluation of existing industrial energy data bases was undertaken to assess their potential for supporting SERI research on: (1) market suitability analysis, (2) market development, (3) end-use matching, (3) industrial applications case studies, and (4) identification of cost and performance goals for solar systems and typical information requirements for industrial energy end use. In reviewing existing industrial energy data bases, the level of detail, disaggregation, and primary sources of information were examined. The focus was on fuels and electric energy used for heat and power purchased by the manufacturing subsector and listed by 2-, 3-, and 4-digit SIC, primary fuel, and end use. Projections of state level energy prices to 1990 are developed using the energy intensity approach. The effects of federal and state industrial energy conservation programs on future industrial sector demands were assessed. Future end-use energy requirements were developed for each 4-digit SIC industry and were grouped as follows: (1) hot water, (2) steam (212 to 300/sup 0/F, each 100/sup 0/F interval from 300 to 1000/sup 0/F, and greater than 1000/sup 0/F), and (3) hot air (100/sup 0/F intervals). Volume I details the activities performed in this effort.

PENGARUH KINERJA BERBASIS PENCIPTAAN NILAI DAN VARIABEL MAKROEKONOMI TERHADAP RETURN SAHAM INDUSTRI PAKAN TERNAK

Directory of Open Access Journals (Sweden)

Evi Karmilah

2016-07-01

Full Text Available The creation of value-based performance measurement can be an alternative in measuring the company's financial performance. Results can be used as indicators of assessments by investors, and these indicators can influence the stock returns. Besides, macroeconomic variables also affect stock returns. This study aimed to analyze the financial performance of companies in the process of creation of value-added with EVA, MVA, and Tobin's Q approach. Impacts of these performance measurements and macroeconomic variables (exchange rates, interest rates, and inflation on stock returns of the subsector animal feed industry were studied. Descriptive analysis was applied in analyzing the company's financial performance. The impacts of the company financial performance and macroeconomic variables were assessed by using panel data regression analysis. The results related to the company's performance showed that 1 EVA performance dominantly obtained a positive EVA value; 2 MVA performance predominantly produced a positive MVA value in 3 companies and a negative MVA value in the other company; 3 Tobin’s Q performance predominantly generated a value of Q>1 in 2 companies and a value of Q<1 in the other 2 companies. The results of the panel data regression analysis concluded the independent variables influencing the stock return were the performance variables while the macroeconomic variables had no effects on stock return.Keywords: macroeconomic variables, panel data regression, stock return, subsector of animal feed, value-based performance

Characterization and Conditions of the Internationalization Process of Companies in the Plastic Products Manufacturing Subsector in Bogota

Directory of Open Access Journals (Sweden)

Jackson Paul Pereira Silva

2016-04-01

Full Text Available This paper proposes a qualitative research by conducting surveys in 30 companies from the plastic products manufacturing subsector, based on theories of internationalization. It aims to find the main determinants of internationalization of these companies, while characterizing and analyzing evidence by contrasting practice and theory, in order to explain how the dynamics in the sector and its current state are and to propose recommendations for greater competitiveness and efficiency in foreign trade.

Solid waste management in Khartoum industrial area

International Nuclear Information System (INIS)

Elsidig, N. O. A.

2004-05-01

This study was conducted in Khartoum industrial area (KIA). The study discusses solid waste generation issues in KIA as well as solid waste collection, storage, transport and final disposal methods. A focus on environmental impact resulting from the accumulation of solid waste was presented by reviewing solid waste management in developed as well as developing countries starting from generation to final disposal. Environmental health legislation in Sudan was investigated. The study covers all the (eight) industrial sub-sectors presented in KIA. The main objective of the study is to assess the situation of solid waste in KIA. To fulfill the objectives of the study the researcher deemed it necessary to explore problems related to solid waste generation and solid waste arrangement with special emphasis on final disposal methods. Practically, 31 (thirty-one) factories representing the different industrial sub-sectors in KIA were studied. This represents 25% of the total number of factories located in KIA. Data were obtained by, questionnaires, interviews and observations mainly directed to concerned officials, solid waste workers, pickers and brokers. Obtained data were stored, coded, tabulated and analyzed using the computer systems (excel and SPSS programmes). The obtained results should clear deficiency in the management of solid waste which led to great environmental deterioration in KIA and neighboring residential areas. The environment in studied area is continuously polluted due to high pollution loads and unproved solid waste management. In order to maintain health environment operating factories have to pretreated their solid waste according to the recognized standards and waste minimization techniques such as recycling and re use should be widely applied, moreover, running crash programme for environmental sanitation in Khartoum state should be expanded and improved to include special characteristics of solid waste from industries. Finally, increase awareness

LAS PYMES EN EL DESARROLLO DE LA ECONOMÍA SOCIAL. FACTORES DE ÉXITO1 SUBSECTOR CONTRATISTA DEL MUNICIPIO LAGUNILLAS DEL ESTADO ZULIA

Directory of Open Access Journals (Sweden)

Ivonne Acosta Campos

2009-04-01

Full Text Available El objetivo de esta investigación es identificar los factores endógenos que han influido en el desarrollo sustentable de las Pymes del subsector contratista adscritas a la Cámara de Comercio e Industrial del municipio Lagunillas del estado Zulia. La investigación se ubica en el nivel descriptivo. Se utilizó como fuente de recolección de datos la documental y la encuesta. Para el procesamiento de la información se utilizó el análisis de contenido a través de matrices de categorías. Los hallazgos encontrados revelan que los factores endógenos se ubican en las siguientes categorías: (a económicos (b financieros, (c técnicos, (d talento humano, (e gerenciales. Se concluye que los factores internos incidentes en el desarrollo sustentable de las Pymes se ubican en las diferentes áreas de funcionamiento de las empresas.

Retrospective and Prospective Decomposition Analysis of Chinese Manufacturing Energy Use, 1995-2020

Energy Technology Data Exchange (ETDEWEB)

Hasanbeigi, Ali [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division, Environmental Impacts Dept., China Energy Group; Price, Lynn [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division, Environmental Impacts Dept., China Energy Group; Fino-Chen, Cecilia [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division, Environmental Impacts Dept., China Energy Group; Lu, Hongyou [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division, Environmental Impacts Dept., China Energy Group; Ke, Jing [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division, Environmental Impacts Dept., China Energy Group

2013-01-15

In 2010, China was responsible for nearly 20 percent of global energy use and 25 percent of energy-related carbon dioxide (CO₂) emissions. Unlike most countries, China’s energy consumption pattern is unique because the industrial sector dominates the country’s total energy consumption, accounting for about 70 percent of energy use and 72 percent of CO₂ emissions in 2010. For this reason, the development path of China’s industrial sector will greatly affect future energy demand and dynamics of not only China, but the entire world. A number of analyses of historical trends have been conducted, but careful projections of the key factors affecting China’s industry sector energy use over the next decade are scarce. This study analyzes industrial energy use and the economic structure of the Chinese manufacturing sector in detail. First, the study analyzes the energy use of and output from 18 industry sub-sectors. Then, retrospective (1995-2010) and prospective (2010-2020) decomposition analyses are conducted for these industrial sectors in order to show how different factors (production growth, structural change, and energy intensity change) influenced industrial energy use trends in China over the last 15 years and how they will do so over the next 10 years. The results of this study will allow policy makers to quantitatively compare the level of structural change in the past and in the years to come and adjust their policies if needed to move towards the target of less energy-intensive industries. The scenario analysis shows the structural change achieved through different paths and helps to understand the consequences of supporting or limiting the growth of certain manufacturing subsectors from the point of view of energy use and structural change. The results point out the industries that have the largest influence in such structural change

Institutional Interplay in Natural Resources Governance: Toward a Sub-Sectoral Approach for Medicinal Plants Management in Bangladesh

Directory of Open Access Journals (Sweden)

A. K. M. Shahidullah

2015-03-01

Full Text Available Recognizing the significance of medicinal plants for rural livelihoods and primary healthcare, this paper attempted to analyze institutional interplays in medicinal plants management in Bangladesh. It assessed the governing process of natural resources by identifying cross-scale linkages of the institutions involved with managing medicinal plants. The study intended to delineate the interactional patterns and dynamics between existing formal and informal organizations toward exploring prospects of new medicinal plants governance institutions. Employing case study and participatory approaches to empirical field investigation, two intervention cases of the Livelihood and Agro-Forestry (LEAF and Sustainable Environmental Management Program (SEMP were assessed in two different social-ecological settings of the country. Involving 45 respondents in each site, Focus Group Discussions were carried out, and a total of 26 Key Informants were interviewed. The findings have revealed that undefined roles and responsibilities, inadequate coordination, and weak linkages among the cross-scale institutions resulted in ineffective management and relatively poor performance. Institutions with direct or indirect involvement in the process of managing medicinal plants interacted haphazardly, without much focus on the subsector and its local producers. Addressing the weaknesses, this study calls for formulating a national sub-sectoral approach focusing on strengthening and sustaining local producers and value addition to producer levels. Finally, this research offers a framework for developing a multi-stakeholder forum to govern medicinal plant resources coherently and effectively in Bangladesh.

The internationalisation of the Spanish food industry: the home market effect and European market integration

Energy Technology Data Exchange (ETDEWEB)

Serrano, R.; García-Casarejos, N.; Gil-Pareja, S.; Llorca-Vivero, R.; Pinilla, V.

2015-07-01

The objective of this study was to analyse, from a long-term perspective, the factors determining the process of the internationalisation of the Spanish agrifood industry. The paper concentrates on the empirical verification of the existence of a home market effect in the food and drink industries in Spain and on the effects on trade flows of integration into the European Union. With this aim in mind, we took into account the latest contributions to the estimation of the gravity equation for a sample of export flows from 13 agrifood subsectors between 1970 and 2012, with a destination of 175 markets. From the results of the study the existence of the “home market effect” stands out as the determining factor of the increasing process of internationalisation in the majority of the subsectors of the food industry. On this point, the presence of this effect is remarkable in the most dynamic industries, where the process of restructuring caused by the development of the internal market was more intense. Furthermore, the influence of the process of European integration has been shown by the literature to be a very important factor. Our results qualify in part the results of previous studies, since the positive effect appeared later than expected. The positive effects did not appear until the completion of the process of transition by the dismantling of the barriers established in the treaty of accession to the European Union. (Author)

ANALISIS POTENSI EKONOMI DAERAH DALAM PENGEMBANGAN KOMODITI UNGGULAN KABUPATEN AGAM

Directory of Open Access Journals (Sweden)

Yolamalinda

2014-10-01

Full Text Available Globalization requires areas within the national territory to compete in the free trade competitively with products from countries all over the world. Regional economic development is expected to produce superior quality products that can compete in competition, both domestically and abroad. Agam as areas that have the potential of tourism and culture has the potential to perform on the world market with superior commodity sub-sectors of the manufacturing industry. This article analyzes the election of regional commodity Agam using LQ analysis, specialization index, Shift share and SWOT analysis. The analysis finds that subsekctor processing industry has a competitive advantage and thus likely to be developed to increase the region's economy. Commodity embroidery as a creative industry is a commodity that is mapped able to compete on the sub-sectors of the processing industry because the rich local cultural values and Islamic values. A variety of programs and government policies are needed to support these commodities to appear on the international market.

Empirical Studies Development Of Creative Industry Its Contribution To Make-Up Of Product Orientation Exporting In Denpasar-Bali

Science.gov (United States)

Suryathi, W.; Gede, I. G. K.

2018-01-01

The puIDRose of this study are : 1) to study the model of development of creative industries which export-oriented in Denpasar 2) to examine the main problems and constraints faced by creative industries 3) to know the increasing of product export in Denpasar.The number of samples are 15 creatives industries such as sub-sector of handicraft, fashion and culinary. Sampling technique used cluster and puIDRosive sampling. Data collection by interview, observation, literature study and questioner. Data analysis using qualitative and quantitative description. The results of this study explain: The model development of creative industry in Denpasar City basically consist of three phases that is : development input, development process and development output. The problems and business constraints in creative industries about skill and salary of human resources, capital of financial, promotion of marketing, raw material of resources, technology and modern administration of production. From the product export showed that woods were hight one of crafting sub sector, textiles were hight one of fashion sub sector, tuna fish were hight one of culinary sub sector.

Public Interest Energy Research (PIER) Program. Final Project Report. California Energy Balance Update and Decomposition Analysis for the Industry and Building Sectors

Energy Technology Data Exchange (ETDEWEB)

de la Rue du Can, Stephane [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Hasanbeigi, Ali [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Sathaye, Jayant [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2010-12-01

This report on the California Energy Balance version 2 (CALEB v2) database documents the latest update and improvements to CALEB version 1 (CALEB v1) and provides a complete picture of how energy is supplied and consumed in the State of California. The CALEB research team at Lawrence Berkeley National Laboratory (LBNL) performed the research and analysis described in this report. CALEB manages highly disaggregated data on energy supply, transformation, and end-use consumption for about 40 different energy commodities, from 1990 to 2008. This report describes in detail California's energy use from supply through end-use consumption as well as the data sources used. The report also analyzes trends in energy demand for the "Manufacturing" and "Building" sectors. Decomposition analysis of energy consumption combined with measures of the activity driving that consumption quantifies the effects of factors that shape energy consumption trends. The study finds that a decrease in energy intensity has had a very significant impact on reducing energy demand over the past 20 years. The largest impact can be observed in the industry sector where energy demand would have had increased by 358 trillion British thermal units (TBtu) if subsectoral energy intensities had remained at 1997 levels. Instead, energy demand actually decreased by 70 TBtu. In the "Building" sector, combined results from the "Service" and "Residential" subsectors suggest that energy demand would have increased by 264 TBtu (121 TBtu in the "Services" sector and 143 TBtu in the "Residential" sector) during the same period, 1997 to 2008. However, energy demand increased at a lesser rate, by only 162 TBtu (92 TBtu in the "Services" sector and 70 TBtu in the "Residential" sector). These energy intensity reductions can be indicative of energyefficiency improvements during the past 10 years. The research presented in this report provides a basis for developing an energy-efficiency performance index to measure

The Sources of Efficiency of the Nigerian Banking Industry: A Two- Stage Approach

Directory of Open Access Journals (Sweden)

Frances Obafemi

2013-11-01

Full Text Available The paper employed a two-stage Data Envelopment Analysis (DEA approach to examine the sources oftechnical efficiency in the Nigerian banking sub-sector. Using a cross sectionof commercial and merchant banks, the study showed that the Nigerian bankingindustry was not efficient both in the pre-and-post-liberalization era. Thestudy further revealed that market share was the strongest determinant oftechnical efficiency in the Nigerian banking Industry. Thus, appropriatemacroeconomic policy, institutional development and structural reforms mustaccompany financial liberalization to create the stable environment requiredfor it to succeed. Hence, the present bank consolidation and reforms by theCentral Bank of Nigeria, which started with Soludo and continued with Sanusi,are considered necessary, especially in the areas of e banking and reorganizingthe management of banks.

Impact of improved technology on industrial greenhouse-gas emissions in developing countries. Phase 1

International Nuclear Information System (INIS)

1997-06-01

In response to a formal request by the Group of 77 and China, the United Nations Industrial Development Organization (UNIDO) initiated a study to identify opportunities to reduce the emissions of greenhouse gases from energy-intensive industries in developing countries. These sectors currently include iron and steel, petroleum refining, cement, paper and pulp and nitrogen fertilizers. The aim of this first phase was to describe: how energy is used in the energy-intensive industries in developing countries today; what current trends indicate for the future; the potential contribution of improved technologies and practices to moving toward more sustainable industrial production in developing countries, and to provide developing countries with an analytical tool for evaluating opportunities to limit industrial greenhouse-gas (GHG) emissions in their industrial sectors through the transfer of improved technologies and processes. The immediate objectives of Phase 1 were twofold: to provide information to developing countries in the form of an inventory of energy-efficient, best-available technologies and processes that can be used to abate greenhouse-gas emissions in the most energy-intensive industrial sub-sectors as well as cross-cutting measures applicable in a range of sub-sectors, and; to provide an analytical methodology in the form of a software tool that enables the user to evaluate and compare the costs, energy requirements, and greenhouse-gas emissions associated with scenarios of specific technology and process options. To meet these objectives, the first phase of the study comprised: a Report entitled Industrial Greenhouse-gas Emissions from Developing Countries; a Software Package containing, an Industrial Technology Inventory, and an Analysis Tool, and; Industry/country-specific Case Studies. The Report describes current energy use and greenhouse-gas emissions in energy-intensive industries in developing countries, and similar industries exemplifying good

STRATEGI PENINGKATAN DAYA SAING PT ‘ABCD’ TBK. DI INDUSTRI MAKANAN OLAHAN PADA TAHUN 2015

Directory of Open Access Journals (Sweden)

Kanya Lakshmi Sidarta

2016-01-01

Full Text Available The distribution of market share of Indonesia's processed food industry is dominated by only a few companies, i.e. one company representing 20% of market share, three companies representing 10% of market share, and 124 companies representing 35% of shares (2013, LEK insights. This condition is also shown by there are only 15 companies which are listed in Indonesian Stock Exchange (BEI as sub-sectors of food and beverages. CV 'ABCD', known as the 'ABCD', is one of the companies listed on the BEI on the sub-sectors of food and beverages. Thus, the purposes of this study were to examine the factors influencing the competition in the processed food industry in Indonesia, to analyze the competitiveness of 'ABCD' among other competing companies listed on BEI, and to propose alternative strategies to improve the competitiveness of 'ABCD' within the developing and challenging market. The analytical tools used in the study were Porter's Diamond Model, Firm Value Creation and AHP. The results showed that the factors affecting the competitiveness of the processed food industry in Indonesia, in reference to Porter's Diamond Model, is the availability of products (good quality & innovative, the number of requests, the decision-making process with a clear purpose, value creation, and good internal and external relations. The alternative strategy proposed in enhancing the competitiveness of 'ABCD' is improving quality standards in an integrated system by the CEO (owner and Director of Marketing as the main actors in the clear decision process.Keywords: AHP, competitiveness, diamond porter, processed food industry, BEI

How Can China Lighten Up? Urbanization, Industrialization and Energy Demand Scenarios

Energy Technology Data Exchange (ETDEWEB)

Aden, Nathaniel T.; Zheng, Nina; Fridley, David G.

2009-07-01

Urbanization has re-shaped China's economy, society, and energy system. Between 1990 and 2007 China added 290 million new urban residents, bringing the total urbanization rate to 45%. This population adjustment spurred energy demand for construction of new buildings and infrastructure, as well as additional residential use as rural biomass was replaced with urban commercial energy services. Primary energy demand grew at an average annual rate of 10% between 2000 and 2007. Urbanization's effect on energy demand was compounded by the boom in domestic infrastructure investment, and in the export trade following World Trade Organization (WTO) accession in 2001. Industry energy consumption was most directly affected by this acceleration. Whereas industry comprised 32% of 2007 U.S. energy use, it accounted for 75% of China's 2007 energy consumption. Five sub-sectors accounted for 78% of China's industry energy use in 2007: iron and steel, energy extraction and processing, chemicals, cement, and non-ferrous metals. Ferrous metals alone accounted for 25% of industry and 18% of total primary energy use. The rapid growth of heavy industry has led China to become by far the world's largest producer of steel, cement, aluminum, and other energy-intensive commodities. However, the energy efficiency of heavy industrial production continues to lag world best practice levels. This study uses scenario analysis to quantify the impact of urbanization and trade on industrial and residential energy consumption from 2000 to 2025. The BAU scenario assumed 67% urbanization, frozen export amounts of heavy industrial products, and achievement of world best practices by 2025. The China Lightens Up (CLU) scenario assumed 55% urbanization, zero net exports of heavy industrial products, and more aggressive efficiency improvements by 2025. The five dominant industry sub-sectors were modeled in both scenarios using a LEAP energy end-use accounting model. The results of

Proceso de Evaluación de desempeño: análisis desde la teoría de la burocracia y de la agencia: estudios de caso del subsector hotelero en Medellín

OpenAIRE

Castaño Serna, Diana Marcela

2014-01-01

Resumen: Esta investigación tiene como objetivo principal estudiar el proceso de Evaluación de Desempeño y como se encuentra influenciado por la teoría de la burocracia y la teoría de la Agencia en el subsector hotelero de la ciudad de Medellín. El proceso de Evaluación de desempeño se considera de gran importancia para este subsector dado que el servicio que estos otorgan depende directamente del desempeño de los trabajadores y es lo que determina la satisfacción de los clientes, a partir de...

Energy-Efficiency Improvement Opportunities for the Textile Industry

Energy Technology Data Exchange (ETDEWEB)

China Energy Group; Hasanbeigi, Ali

2010-09-29

The textile industry is one of the most complicated manufacturing industries because it is a fragmented and heterogeneous sector dominated by small and medium enterprises (SMEs). Energy is one of the main cost factors in the textile industry. Especially in times of high energy price volatility, improving energy efficiency should be a primary concern for textile plants. There are various energy-efficiency opportunities that exist in every textile plant, many of which are cost-effective. However, even cost-effective options often are not implemented in textile plants mostly because of limited information on how to implement energy-efficiency measures, especially given the fact that a majority of textile plants are categorized as SMEs and hence they have limited resources to acquire this information. Know-how on energy-efficiency technologies and practices should, therefore, be prepared and disseminated to textile plants. This guidebook provides information on energy-efficiency technologies and measures applicable to the textile industry. The guidebook includes case studies from textile plants around the world and includes energy savings and cost information when available. First, the guidebook gives a brief overview of the textile industry around the world, with an explanation of major textile processes. An analysis of the type and the share of energy used in different textile processes is also included in the guidebook. Subsequently, energy-efficiency improvement opportunities available within some of the major textile sub-sectors are given with a brief explanation of each measure. The conclusion includes a short section dedicated to highlighting a few emerging technologies in the textile industry as well as the potential for the use of renewable energy in the textile industry.

The topological B-model on fattened complex manifolds and subsectors of N=4 self-dual Yang-Mills theory

International Nuclear Information System (INIS)

Saemann, Christian

2005-01-01

In this paper, we propose so-called fattened complex manifolds as target spaces for the topological B-model. We naturally obtain these manifolds by restricting the structure sheaf of the N=4 supertwistor space, a process, which can be understood as a fermionic dimensional reduction. Using the twistorial description of these fattened complex manifolds, we construct Penrose-Ward transforms between solutions to the holomorphic Chern-Simons equations on these spaces and bosonic subsectors of solutions to the N=4 self-dual Yang-Mills equations on C 4 or R 4 . Furthermore, we comment on Yau's theorem for these spaces. (author)

Decomposition Analysis of the Factors that Influence Energy Related Air Pollutant Emission Changes in China Using the SDA Method

Directory of Open Access Journals (Sweden)

Shichun Xu

2017-09-01

Full Text Available We decompose factors affecting China’s energy-related air pollutant (NOx, PM2.5, and SO2 emission changes into different effects using structural decomposition analysis (SDA. We find that, from 2005 to 2012, investment increased NOx, PM2.5, and SO2 emissions by 14.04, 7.82 and 15.59 Mt respectively, and consumption increased these emissions by 11.09, 7.98, and 12.09 Mt respectively. Export and import slightly increased the emissions on the whole, but the rate of the increase has slowed down, possibly reflecting the shift in China’s foreign trade structure. Energy intensity largely reduced NOx, PM2.5, and SO2 emissions by 12.49, 14.33 and 23.06 Mt respectively, followed by emission efficiency that reduces these emissions by 4.57, 9.08, and 17.25 Mt respectively. Input-output efficiency slightly reduces the emissions. At sectoral and sub-sectoral levels, consumption is a great driving factor in agriculture and commerce, whereas investment is a great driving factor in transport, construction, and some industrial subsectors such as iron and steel, nonferrous metals, building materials, coking, and power and heating supply. Energy intensity increases emissions in transport, chemical products and manufacturing, but decreases emissions in all other sectors and subsectors. Some policies arising from our study results are discussed.

Network structure detection and analysis of Shanghai stock market

Directory of Open Access Journals (Sweden)

Sen Wu

2015-04-01

Full Text Available Purpose: In order to investigate community structure of the component stocks of SSE (Shanghai Stock Exchange 180-index, a stock correlation network is built to find the intra-community and inter-community relationship. Design/methodology/approach: The stock correlation network is built taking the vertices as stocks and edges as correlation coefficients of logarithm returns of stock price. It is built as undirected weighted at first. GN algorithm is selected to detect community structure after transferring the network into un-weighted with different thresholds. Findings: The result of the network community structure analysis shows that the stock market has obvious industrial characteristics. Most of the stocks in the same industry or in the same supply chain are assigned to the same community. The correlation of the internal stock prices’ fluctuation is closer than in different communities. The result of community structure detection also reflects correlations among different industries. Originality/value: Based on the analysis of the community structure in Shanghai stock market, the result reflects some industrial characteristics, which has reference value to relationship among industries or sub-sectors of listed companies.

The Determinants of Capital Structure: an Empirical Study of Omani Listed Industrial Companies

Directory of Open Access Journals (Sweden)

Mawih Al Ani

2015-06-01

Full Text Available This study investigates five determinants of capital structure (leverage in three subsectors of the Omani Industrial companies (food, construction and chemical listed on Muscat Securities Market for the period 2008–2012. According to available information and literature review, the determinants are profitability measured by return on assets (ROA, risk measured by the standard deviation of return on assets, the size of the company measured by the natural logarithm of total assets, rate of growth measured by the market-book value ratio (P/E and assets tangibility measured by fixed assets to total assets ratio. The capital structure or leverage is measured by total debt ratio. In the industrial sector as whole; the findings of the study indicate that there is a statistically positive association between risk and tangibility and leverage. Also, there is a statistically negative association between growth rate and profitability and leverage, while there is no association with size. Regression analysis indicates that size, tangibility and risk have a statistically significant effect on leverage.

Análisis estratégico del sector envasador de aceite de oliva en España. Recomendaciones para el subsector cooperativo

Directory of Open Access Journals (Sweden)

Yolanda Pelayo Díaz

2003-01-01

Full Text Available Se propone, a partir de un análisis dafo en el sector envasador de aceite de oliva en España, un posicionamiento producto-mercado para el subsector productor cooperativo, con el objeto de encontrar estrategias para que éste participe en el sistema agroalimentario no sólo en la fase de producción, sino también en las actividades comercializadoras orientadas al consumidor final.

Spatial GHG Inventory: Analysis of Uncertainty Sources. A Case Study for Ukraine

International Nuclear Information System (INIS)

Bun, R.; Gusti, M.; Kujii, L.; Tokar, O.; Tsybrivskyy, Y.; Bun, A.

2007-01-01

A geoinformation technology for creating spatially distributed greenhouse gas inventories based on a methodology provided by the Intergovernmental Panel on Climate Change and special software linking input data, inventory models, and a means for visualization are proposed. This technology opens up new possibilities for qualitative and quantitative spatially distributed presentations of inventory uncertainty at the regional level. Problems concerning uncertainty and verification of the distributed inventory are discussed. A Monte Carlo analysis of uncertainties in the energy sector at the regional level is performed, and a number of simulations concerning the effectiveness of uncertainty reduction in some regions are carried out. Uncertainties in activity data have a considerable influence on overall inventory uncertainty, for example, the inventory uncertainty in the energy sector declines from 3.2 to 2.0% when the uncertainty of energy-related statistical data on fuels combusted in the energy industries declines from 10 to 5%. Within the energy sector, the 'energy industries' subsector has the greatest impact on inventory uncertainty. The relative uncertainty in the energy sector inventory can be reduced from 2.19 to 1.47% if the uncertainty of specific statistical data on fuel consumption decreases from 10 to 5%. The 'energy industries' subsector has the greatest influence in the Donetsk oblast. Reducing the uncertainty of statistical data on electricity generation in just three regions - the Donetsk, Dnipropetrovsk, and Luhansk oblasts - from 7.5 to 4.0% results in a decline from 2.6 to 1.6% in the uncertainty in the national energy sector inventory

Energy and exergy analysis at the utility and commercial sectors of Malaysia

International Nuclear Information System (INIS)

Saidur, R.; Sattar, M.A.; Masjuki, H.H.; Abdessalam, H.; Shahruan, B.S.

2007-01-01

In this paper, sectoral energy and exergy analysis model is applied to the utility and commercial sectors of Malaysia by considering the energy and exergy flows from 1990 to 2003. The energy and exergy efficiencies are determined for the sub-sectors and devices used in these two sectors. It has been found the hydroelectric power plant sub-sector is more energy and exergy efficient compared to the thermal power plant sub-sector. The energy and exergy efficiencies of utility and commercial sectors of Malaysia are compared with a few other countries around the world as well. The utility and commercial sectors of Malaysia are found to be more efficient than that of Thailand, Brunei, China, and Vietnam in 1999

Understanding industrial energy use: Physical energy intensity changes in Indian manufacturing sector

International Nuclear Information System (INIS)

Sudhakara Reddy, B.; Kumar Ray, Binay

2011-01-01

This study develops and examines physical energy intensity indicators in five industrial sub-sectors-iron and steel, aluminum, textiles, paper, and cement-and investigates mitigation options for energy related CO 2 emissions (during 1991-2005). Decomposition analysis has been employed to separate the structural effect (share of different products in the sector) from pure intensity effect (efficiency increase through technical improvement) for each industry. The results show that the combined effect (considering both structural and intensity effects together) on both iron and steel and paper and pulp industries is negative while it is positive for aluminum and textiles. The intensity effect for all the industries, barring textiles, is negative showing improvement in energy efficiency; iron and steel in particular, has seen a decrease of 134 PJ in energy consumption owing to improvements in efficiency. However, energy intensity in textiles has risen by 47 PJ due to increased mechanization. Structural effect is positive in aluminum and iron and steel industries indicating a movement towards higher energy-intensive products. In the case of aluminum, positive structural effect dominates over negative intensive effect whereas negative intensive effect dominates iron and steel industry. The paper helps in designing policies for improving productivity and reduce energy consumption in India's manufacturing sector. - Highlights: → The study develops physical energy intensity indicators in industrial sub-sectors of India. → It identifies technological and other options for reduction in energy consumption. → The study quantifies savings in energy as well as CO 2 emissions. → The indicators are useful in examining structural changes.

Prevalence of Hearing Loss Among Noise-Exposed Workers Within the Health Care and Social Assistance Sector, 2003 to 2012.

Science.gov (United States)

Masterson, Elizabeth A; Themann, Christa L; Calvert, Geoffrey M

2018-04-01

The purpose was to estimate the prevalence of hearing loss for noise-exposed U.S. workers within the Health Care and Social Assistance (HSA) sector. Audiograms for 1.4 million workers (8702 within HSA) from 2003 to 2012 were examined. Prevalences and adjusted risks for hearing loss as compared with a reference industry were estimated for the HSA sector and all industries combined. While the overall HSA sector prevalence for hearing loss was 19%, the prevalences in the Medical Laboratories subsector and the Offices of All Other Miscellaneous Health Practitioners subsector were 31% and 24%, respectively. The Child Day Care Services subsector had a 52% higher risk than the reference industry. High-risk industries for hearing loss exist within the HSA sector. Further work is needed to identify the sources of noise exposure and protect worker hearing.

Consumer and food industries education on food irradiation

International Nuclear Information System (INIS)

Othman, Z.

2001-01-01

A survey was conducted on Malaysian food industries to determine the interest and potential applications of food irradiation as an alternative or to complement existing food preservation treatments. A total of 37 food processors representing 5 subsectors of the food industry participated in the survey. Information collected showed that majority of respondents were aware of food irradiation but the level of knowledge was low. Half of respondents perceived food irradiation as safe and 23% will consider using it for commercial purposes. Main concerns of the food processors were safety of the process, safety of irradiated food, efficacy of the process and consumer acceptance. Food irradiation applications considered to have the most potential for use by the food industry, were those which would improve the hygienic quality of food products. Despite the limited knowledge, respondents strongly supported the need to promote food irradiation technology in Malaysia. In view of this finding. various promotional activities have been continuously carried out to increase public awareness and understanding of the technology so as to facilitate acceptance of food irradiation in Malaysia. (author)

Prevalence of hearing loss among noise-exposed workers within the agriculture, forestry, fishing, and hunting sector, 2003-2012.

Science.gov (United States)

Masterson, Elizabeth A; Themann, Christa L; Calvert, Geoffrey M

2018-01-01

The purpose of this study was to estimate the prevalence of hearing loss among noise-exposed US workers within the Agriculture, Forestry, Fishing, and Hunting (AFFH) sector. Audiograms for 1.4 million workers (17 299 within AFFH) from 2003 to 2012 were examined. Prevalence, and the adjusted risk for hearing loss as compared with the reference industry (Couriers and Messengers), were estimated. The overall AFFH sector prevalence was 15% compared to 19% for all industries combined, but many of the AFFH sub-sectors exceeded the overall prevalence. Forestry sub-sector prevalences were highest with Forest Nurseries and Gathering of Forest Products at 36% and Timber Tract Operations at 22%. The Aquaculture sub-sector had the highest adjusted risk of all AFFH sub-sectors (PR = 1.70; CI = 1.42-2.04). High risk industries within the AFFH sector need continued hearing conservation efforts. Barriers to hearing loss prevention and early detection of hearing loss need to be recognized and addressed. © 2017 Wiley Periodicals, Inc.

The Role of State-business Relations in the Performance of Zambia’s Food Processing Sub-sector

DEFF Research Database (Denmark)

Hampwaye, Godfrey; Jeppesen, Søren

2014-01-01

. The paper attempts to examine how and why SBRs matter to and influence the growth and performance of local owned firms in the food processing sub-sector in Zambia. In particular, the paper analyses the roles and influence of government regulations and policies compared to those of business associations......In ensuring growth and development collaborative State-Business relations (SBRs) matters, and with economic growth comes increasing levels of employment, options for poverty reduction and hence more equitable development. Whereas it is known that SBR matters at a macro-economic level, the concept...... of SBR has also been employed in a more or less all-encompassing way in the literature. Accordingly, while it is clear that SBRs work, there is lack knowledge about which dimensions of SBRs are the most important. Due to the continued importance of agriculture in many developing countries, processing...

Systematic risk assessment methodology for critical infrastructure elements - Oil and Gas subsectors

Science.gov (United States)

Gheorghiu, A.-D.; Ozunu, A.

2012-04-01

. The criterial evaluation is used as a ranking system in order to establish the priorities for the detailed risk assessment. This criterial analysis stage is necessary because the total number of installations and sections on a site can be quite large. As not all installations and sections on a site contribute significantly to the risk of a major accident occurring, it is not efficient to include all installations and sections in the detailed risk assessment, which can be time and resource consuming. The selected installations are then taken into consideration in the detailed risk assessment, which is the third step of the systematic risk assessment methodology. Following this step, conclusions can be drawn related to the overall risk characteristics of the site. The proposed methodology can as such be successfully applied to the assessment of risk related to critical infrastructure elements falling under the energy sector of Critical Infrastructure, mainly the sub-sectors oil and gas. Key words: Systematic risk assessment, criterial analysis, energy sector critical infrastructure elements

Lessons for Co-Innovation in Agricultural Innovation Systems: A Multiple Case Study Analysis and a Conceptual Model

Science.gov (United States)

Fielke, Simon J.; Botha, Neels; Reid, Janet; Gray, David; Blackett, Paula; Park, Nicola; Williams, Tracy

2018-01-01

Purpose: This paper highlights important lessons for co-innovation drawn from three ex-post case study innovation projects implemented within three sub-sectors of the primary industry sector in New Zealand. Design/methodology/approach: The characteristics that fostered co-innovation in each innovation project case study were identified from…

Competitiveness of the Garment Industry on the Basis of the Industrial Cluster Establishment

Directory of Open Access Journals (Sweden)

Tatiana Dmitrievna Sinyavets

2016-03-01

Full Text Available The issue of the development prospects of the Russian economy and the economy of its individual branches in the regions is highly relevant in terms of the increasing crises and economic development challenges. The scope of the study is a garment industry of the Siberian Federal District, which includes 12 subjects, and only six of them develop the garment industry actively. There are the regions of Kemerovo, Novosibirsk, Omsk, Tomsk, Krasnoyarsk Krai and the Republic of Khakassia. The subject matter of the research is the state and prospects of the garment industry of the Siberian Federal District. It also includes the assessment of the garment industry as one of the sub-sectors of the light industry in terms of its competitiveness in the domestic market. The purpose of the comprehensive study is to determine the conditions and factors affecting the development of the industry, as well as to identify its development reserves and competitiveness on the basis of industrial cluster’s generation. The hypothesis of this study is that in the Siberian Federal District, there are a need and reserves to create a cluster of the garment industry. The main methods of the study are the comparative analysis, the expert assessment of the sector in certain regions of the Siberian Federal District, as well as the assessment of possible formation of the industrial cluster in the region. The results of the study are the evaluation of the competitiveness and prospects of the garment industry in Russia and the Siberian Federal District (a low level of development and competitiveness; the evaluation of the development level of the garment industry in the Federal District, which have showed the demand for apparel products from the population and enterprises, as well as the conditions for the provision of clothing manufacture with natural fabrics and synthetic materials, labor resources and research and development achievements; also the justification of the existing

Gerencia sin futuro. Caso, subsector de confecciones para ropa de bebé en Cali

Directory of Open Access Journals (Sweden)

Álvaro Camacho Caicedo

2005-01-01

Full Text Available El nivel de desarrollo de las habilidades conceptuales, sociales y técnicas de un gerente determinan indiscutiblemente el grado de desarrollo y crecimiento que muestra la empresa que él está dirigiendo. Esta relación se hace más evidente en el campo de las pequeñas empresas. La competitividad de éstas en términos de su velocidad de cambio en cuanto a innovación tecnológica, incursión en nuevos mercados y desarrollo de su personal directivo está en función directa de los valores, visión y diseño de estrategias de sus gerentes. El artículo muestra la relación y contraste existente entre el campo teórico de la denominada gerencia competitiva y la evaluación del desempeño de 20 gerentes caleños ¿ 87% del universo - de pequeñas empresas del subsector de las confecciones para ropa de bebé.

How to learn from other Industries: the Information Technology a case in point

Energy Technology Data Exchange (ETDEWEB)

Lewiner, Colette [Energy, Utilities and Chemicals, Capgemini (France)

2008-07-01

The presentation will start with a snapshot on the different sub-sectors and functions in the Information Technology (IT) industry that is, worldwide, one of the largest employers of engineering and technical skills. A view of the presence of women in these different functions will be presented. The similarities with the nuclear industries will be underlined as both sectors employ technical and scientific competencies. An analysis of the historic role of women in science reveals some root causes of the relatively small presence of women in these sectors. The IT industry is a young and service oriented sector. At the beginning it has been embraced by many women and raised a lot of hope that it would not be 'sexist' biased. However, it is becoming over time more and more male dominated. The reasons of this shift will be analysed. Contrary to the nuclear industry, IT projects are increasingly managed in a distributed delivery mode with a growing share of Indian or other location offshore competencies. This brings more opportunities for professional women development. Will certain parts of the nuclear industry follow the same path? The barriers to female carriers' development, similar to those encountered in other sectors, have to be overcome as an increased female presence in the IT industry is a key factor to overcome the forecasted shortage of technical skills. This is true as well for the nuclear industry. The conclusion will focus on positive actions taken by in some IT firms either towards the education system or directed to their female employees. Some suggestions will be given on how to adapt these best practices to the nuclear industry. (author)

Profile of the chemicals industry in California: Californiaindustries of the future program

Energy Technology Data Exchange (ETDEWEB)

Galitsky, Christina; Worrell, Ernst

2004-06-01

-specific energy-efficiency. An important element of the SIOF-program is the preparation of R&D roadmaps for each of the selected industries. The roadmap will help to identify priority needs for the participating industries to meet their energy challenges. The roadmap effort builds on the roadmaps developed by DOE, and on the conditions specific for the industry in California. Key to the successful preparation of a roadmap in the selected industries is the development of a profile of the industries. The profile provides a basis for the participants in the roadmap-effort, especially as the structure of the industries in California can be different than in the nation. The sector profiles describe the current economic and energy situation of these industries in California, the processes and energy uses, and the potential future developments in each industry. The profiles are an integral part of the roadmap, to help working group partners to evaluate the industry's R&D needs for their industry in California. In this report, we focus on the chemicals industry. The industry is an important economic factor in the state, providing over 82,300 jobs directly, and more in indirect employment. Value of shipments in 2001 was just under $25.7 Billion, or 6% of all manufacturing in California. There are over 1,500 chemical plants in California, of which 52% are pharmaceutical companies. Many companies operate chemical plants in California. The industry consumes 8% of the electricity and 5% of the natural gas in California. In this report, we start with a description of the chemical industry in the United States and California. This is followed by a discussion of the energy consumption and energy intensity of the Californian chemical industry. Chapter 3 focuses on the main sub-sectors. For each of the sub-sectors a general process description is provided in Chapter 4. Based on this analysis, in Chapter 5, we discuss potential technology developments that can contribute to further improving

Regional Economic Development Strategy Based Agro-Industries in Key Region Kandangan South of Kalimantan

Directory of Open Access Journals (Sweden)

Dewi Siska

2016-06-01

Full Text Available Agroindustry has become the main pillar in South Kalimantan development, it can be found in RPJPD 2005-2025. Kandangan mainstay region as one of three leading regions in South Kalimantan which potentially improved to push economy growth through agriculture based industry activity (agroindustry. The concept of agroindustry a side is expected to drive economic growth as well as to realize the equitable distribution of income. This research aims to: (1 identify to economic development of the region in Kandangan mainstay regions, (2 identify the main commodity, (3 identify means of supporting agroindustry, and (4 formulating development strategies based agroindustry region. Entropy analysis shows the development of the economy sufficiently developed in Kandangan mainstay region dominated by the agricultural sector, namely food crops subsector. LQ an SSA analysis shows corn and rice crops become competitive commodities. There are only few of supporting infrastructure agroindustry activities. Strategy formulation in the research is the improvement of infrastructure or infrastructure that can facilitate inter regional connectivity in the region mainstay Kandangan and the government as the leading actor agroindustry development.

Análisis retrospectivo de los proyectos de ciencia, tecnología e innovación del subsector pecuario financiados por Colciencias, 1991-2010

OpenAIRE

Mónica María Baquero Parra; Edison Hernán Suárez Ortiz

2012-01-01

Entre las herramientas que ofrece Colciencias para lograr sus objetivos como entidad rectora del Sistema Nacional de Ciencia, Tecnología e Innovación, se encuentran las convocatorias públicas. El objetivo del presente trabajo es identificar y analizar los proyectos financiados por Colciencias durante el periodo 1991-2010 en temáticas correspondientes al subsector pecuario. Para esto se empleó la base de datos de registro de proyectos de Colciencias, a fin de identificar los proyectos del subs...

Investigation on the Relationship owth of Agricultural Sector’s Growth with Growth of Industrial and Service Sectors (Commerce, Transportation, Telecommunication in Iran

Directory of Open Access Journals (Sweden)

yaghoob zeraatkish

2014-03-01

Full Text Available Agriculture has always been considerd as one of the important sectors in domestic and international economy .Based on the Central Bank Statistics; agriculture’s share in the Iranian GDP at the constant price of the year 1998 was 13 percent of the GDP in the year 2007. Therefore, studies on the role of agriculture in an economy and its interactions with other economic sectors should be considered with a special attention. This paper aimed at surveying the effects of growth of value-added in agriculture on the value-added of different sectors of industry, services as well as subordinate sectors of transportation, communication and commerce. In this regard, the status of the period between 1967 to 2009 is used. To determine the relationship among the study variables, some econometric techniques such as VAR were used. The results of VAR technique proves that there is a positive relation among the growth of value-added in the agricultural sector with the growth of industrial sector and the growth of sub-sectors of communication, transportation and commerce. Among the mentioned sectors and sub-sectors, the growth of commerce has maximum effect on the agricultural growth. Furthermore, in the short term, the growth variant of trading sector presented the largest share in explaining the variants of the agriculture sector . The growth variant of communication sector is trivial

La planificación tributaria como instrumento idóneo para maximizar los beneficios económicos: caso del subsector comercializadoras de la rana especie "catesbiana”

OpenAIRE

Torres Gallardo, Ana Lucía

2016-01-01

La presente investigación tiene como propósito aplicar la planificación tributaria como instrumento idóneo para maximizar el aprovechamiento de los beneficios e incentivos existentes en nuestro sistema tributario, aplicado al subsector ranicultor. El objetivo principal es proporcionar a los empresarios (principalmente pequeños y medianos) directrices para aprovechar los beneficios e incentivos que la ley establece, e incentivar de esta forma el emprendimiento y la asociación entre empresarios...

Blue and grey water footprint of textile industry in China.

Science.gov (United States)

Wang, Laili; Ding, Xuemei; Wu, Xiongying

2013-01-01

Water footprint (WF) is a newly developed idea that indicates impacts of freshwater appropriation and wastewater discharge. The textile industry is one of the oldest, longest and most complicated industrial chains in the world's manufacturing industries. However, the textile industry is also water intensive. In this paper, we applied a bottom-up approach to estimate the direct blue water footprint (WFdir,blue) and direct grey water footprint (WFdir,grey) of China's textile industry at sector level based on WF methodology. The results showed that WFdir,blue of China's textile industry had an increasing trend from 2001 to 2010. The annual WFdir,blue surpassed 0.92 Gm(3)/yr (giga cubic meter a year) since 2004 and rose to peak value of 1.09 Gm(3)/yr in 2007. The original and residuary WFdir,grey (both were calculated based on the concentration of chemical oxygen demand (CODCr)) of China's textile industry had a similar variation trend with that of WFdir,blue. Among the three sub-sectors of China's textile industry, the manufacture of textiles sector's annual WFdir,blue and WFdir,grey were much larger than those of the manufacture of textile wearing apparel, footware and caps sector and the manufacture of chemical fibers sector. The intensities of WFdir,blue and WF(res)dir,grey of China's textile industry were year by year decreasing through the efforts of issuing restriction policies on freshwater use and wastewater generation and discharge, and popularization of water saving and wastewater treatment technologies.

Profiles of five promising industries and apartment dwellings for solar systems trials planning

Energy Technology Data Exchange (ETDEWEB)

1891-12-01

The objective of this study was to identify suitable types of large-scale applications for solar water-heating systems. The factors considered in industrial applications were the amount, type, and cost of energy used for heating water to temperatures <50/sup 0/C. It was found that five industries account for almost one-half of the industrial low-temperautre water-heating requirements. Since oil is the primary source of this energy in Eastern Canada and is soon to be the most costly conventional energy source, large businesses located in Quebec and the Atlantic Provinces were found to be the most promising establishments for solar applications. The report recommends contacting owners in all five industrial sectors to determine their attitudes to solar systems trials and to gather site-specific data. At the same time, the report indicates that apartments, especially those in Eastern Canada, may be more suitable than businesses for large-scale solar water heating. Low-rise apartments use approximately 17 PJ of oil energy for domestic hot water compared to the 11 PJ used by all five industrial subsectors for low-temperature water heating. 4 refs., 5 figs., 100 tabs.

Characterization of new international business of traditional manufacturing industries

Directory of Open Access Journals (Sweden)

Santiago Cantarero Sanz

2013-07-01

Full Text Available The main objective of this study was to study the characteristics of the New International Business (NIS or Born-Global in a sample of 81 SMEs belonging to the Spanish textile sector. This is descriptive analysis regarding the location, the subsector of activity, size, economic performance and internationalization strategy implemented by the NEI (2005-2009.The results identified three groups of NIS: export, import and export-import. The group of companies that makeup the largest importers and are associated with smaller companies. The exporters appear to be related more to low techsub-sectors while more internationally committed are those with a higher dimension. Regarding the location not detected any evidence of territorial pattern. Finally, among firms internationalized in the time period analyzed, it is also noteworthy that the economic performance of these is higher among importers. This study provides information on why the same country and same industry some companies decide shortly be created to assume certain levels of risk, engaging in operations engaged in foreign markets while others do not. It also participates in the debate on the competitiveness of manufacturing companies.

Energy and exergy utilization in transportation sector of Saudi Arabia

International Nuclear Information System (INIS)

Dincer, I.; Hussain, M.M.; Al-Zaharnah, I.

2004-01-01

In this paper we present an analysis of energy and exergy utilization in the transportation sector of Saudi Arabia by considering the sectoral energy and exergy flows for the years of 1990-2001. Energy and exergy analyses are conducted for its three subsectors, namely road, air and marine, and hence the energy and exergy efficiencies are obtained for comparison. Road subsector appears to be the most efficient one compared to air and marine subsectors. It is found that the energy efficiencies in air and marine subsectors are found to be equal to the corresponding exergy efficiencies due to the values of exergy grade function. A comparison of the overall energy and exergy efficiencies of Saudi Arabian transportation sector with the Turkish transportation sector is also presented for the year 1993 based on the data available. Although the sectoral coverage is not same for both countries, it is still useful to illustrate the situation on how subsectoral energy and exergy efficiencies vary over the years. Turkish transportation sector appears to be a bit more efficient for that particular year. It is believed that the present technique is practical and useful for analyzing sectoral energy and exergy utilization to determine how efficient energy and exergy are used in transportation sector. It is also be helpful to establish standards, based on exergy, to facilitate applications in industry and in other planning processes such as energy planning

Relationship between Corporate Social Responsibility and Financial Performance in the Mineral Industry: Evidence from Chinese Mineral Firms

Directory of Open Access Journals (Sweden)

Xiping Pan

2014-06-01

Full Text Available This paper examines the relationship between Corporate Social Responsibility (CSR and Corporate Financial Performance (CFP using panel data for 228 Chinese mineral listed firms from 2010 to 2013 with Pooled Least Squares regression analysis. Our study considers five different sublevel CSR issues—shareholder responsibility, employee responsibility, environmental responsibility, public responsibility, and supplier, customer and consumer responsibility—in capturing the effects of CSR elements on CFP. The estimation results show the different effects of each sublevel CSR issue on CFP. Overall, shareholder, employee responsibility, environmental responsibility, supplier, customer and consumer responsibility have significant relationships with CFP, which are the stakeholders who have the closest linkage with firm operations. Meanwhile, public responsibility outside the firm does not show significant interaction with CFP, which is why many mineral firms ignore the public interest and this leads to conflicts. Shareholder responsibility has the most significant positive effect on CFP. Supplier, customer and consumer responsibility and environmental responsibility usually have negative effects on CFP as costs increase. Moreover, all 228 listed mineral firms that were selected in this paper have been classified into five sub-sectors: the extractive industry, metal fabrication industry, oil and gas industry, gas and water-related industry, and oil-producing equipment industry, based on the Industry Classification Benchmark (ICB. Our study shows that the differences in the relationship between CSR and CFP for five sublevel industries are due to industry characteristics. If the government wants to solve these conflicts and positively encourage firms to adopt CSR, it is necessary to create a mining development environment whereby firm profits are closely tied to CSR.

Industrial applications of neutron activation analysis

International Nuclear Information System (INIS)

Hossain, T.Z.

2001-01-01

Neutron activation analysis has been widely used in the industry and over the years played a key role in the development of manufacturing process as well as monitoring of the process flow. In this context NAA has been utilized both in R and D, and in the factory as a flexible analytical tool. It has been used successfully in numerous industries including broad categories such as Chemical, Pharmaceutical, Mining, Photographic, Oil and Gas, Automobile, Defense, Semiconductor and Electronic industries. Dow Chemical owns and operates a research reactor for analytical measurements of samples generated in both R and D, and manufacturing area in its plant in Midland, Michigan. Although most industries do not have reactors on their campus but use an off site reactor regularly, and often have in-house neutron sources such as a 252 Cf used primarily for NAA. In most industrial materials analysis laboratory NAA is part of a number of analytical techniques such as ICP-MS, AA, SIMS, FTIR, XRF, TXRF etc. Analysis of complex industrial samples may require data from each of these methods to provide a clear picture of the materials issues involved. With the improvement of classical analytical techniques, and the introduction of new techniques, e.g. TXRF, the role of NAA continues to be a key bench mark technique that provides accurate and reliable data. The strength of the NAA in bulk analysis is balanced by its weakness in providing surface sensitive or spatially resolved analysis as is required by many applications. (author)

Industrial numerical analysis

International Nuclear Information System (INIS)

McKee, S.; Elliott, C.M.

1986-01-01

The applications of mathematics to industrial problems involves the formulation of problems which are amenable to mathematical investigation, mathematical modelling, the solution of the mathematical problem and the inter-pretation of the results. There are 12 chapters describing industrial problems where mathematics and numerical analysis can be applied. These range from the numerical assessment of the flatness of engineering surfaces and plates, the design of chain links, control problems in tidal power generation and low thrust satellite trajectory optimization to mathematical models in welding. One chapter, on the ageing of stainless steels, is indexed separately. (UK)

Low carbon society scenario 2050 in Thai industrial sector

International Nuclear Information System (INIS)

Selvakkumaran, Sujeetha; Limmeechokchai, Bundit; Masui, Toshihiko; Hanaoka, Tatsuya; Matsuoka, Yuzuru

2014-01-01

Highlights: • Thai industrial sector has been modelled using AIM/Enduse model. • Potential mitigation of CO 2 for 2050 is approximately 20% from Baseline scenario. • Abatement cost curves show that varied counter measures are practical in the industrial sector. • Energy security is enhanced due to CO 2 mitigation in the LCS scenario. - Abstract: Energy plays a dominant role in determining the individual competitiveness of a country and this is more relevant to emerging economies. That being said, energy also plays an important and ever expanding role in carbon emissions and sustainability of the country. As a developing country Thailand’s industrial sector is vibrant and robust and consumes majority of the energy. In addition, it also has the highest CO 2 emissions, provided the emissions of power generation are taken into account. Industry also accounts for the highest consumption of electricity in Thailand. The objective of this study is to model the Thai industrial energy sector and estimate the mitigation potential for the timeframe of 2010–2050 using the principles of Low Carbon Society (LCS). In addition, the paper would also evaluate emission tax as a key driver of Greenhouse Gas (GHG) mitigation along with Marginal Abatement Cost (MAC) analysis. Another secondary objective is to analyse the impact of mitigation on energy security of the industrial sector. The Thai industrial sector was modelled using AIM/Enduse model, which is a recursive dynamic optimisation model belonging to the Asia–Pacific Integrated Model (AIM) family. Thai industrial sector was divided into nine sub-sectors based on national economic reporting procedures. Results suggest that the mitigation potential in 2050, compared to the Baseline scenario, is around 20% with positive impacts on energy security. The Baseline emission will approximately be 377 Mt-CO 2 in the industrial sector. All four indicators of energy security, Primary Energy Intensity, Carbon Intensity, Oil

Environmental Tax Reforms and Mitigation for Energy-intensive Industries: Some Lessons from European Experience

DEFF Research Database (Denmark)

Andersen, Mikael Skou

2009-01-01

The purpose of this paper is to analyse in more detail the international experiences in applying carbon-energy taxation in two important energy-intensive sectors; iron and steel, as well as non-metallic mineral products (where cement is the most significant subsector).......The purpose of this paper is to analyse in more detail the international experiences in applying carbon-energy taxation in two important energy-intensive sectors; iron and steel, as well as non-metallic mineral products (where cement is the most significant subsector)....

FDI spillovers at different levels of industrial and spatial aggregation: Evidence from the electricity sector

International Nuclear Information System (INIS)

Del Bo, Chiara F.

2013-01-01

The European electricity sector has undergone significant reforms in recent years, in the direction of market opening, integration and privatization. National and regional markets are now characterized by the presence of domestic and foreign firms, both privately and publicly owned. Did foreign entry induce positive productivity spillovers to domestic firms in the electricity sector, both at the aggregate and disaggregated level, while also controlling for domestic firms' ownership? This paper examines this issue by focusing on regional foreign direct investment (FDI) spillovers in the aggregated electricity sector and in the disaggregated sub-sectors of generation and distribution. The results show the importance of industry aggregation in determining the existence and sign of regional FDI spillovers for domestic firms. FDI spillovers are then calculated based on a purely geographic scale, by considering the distance between each firm's city of location and firms in neighboring cities. The importance and sign of FDI spillovers is different with respect to the analysis based on regional administrative boundaries, suggesting that spatial aggregation, along with industrial aggregation, is relevant in accounting for productivity spillover effects of foreign presence in the EU electricity sector. - Highlights: • Has the post-reform entry of foreign firms in the EU electricity sector induced spillover effects? • Spatial and industrial disaggregation are important when evaluating foreign direct investment (FDI) spillovers. • Positive horizontal spillovers are found only in the distribution segment of the industry. • Vertical spillovers in generation are negative; positive in distribution. • Spillover intensity in distribution decreasing with distance; regional dimension relevant in generation

Bölgesel Kalkınmada Geleneksel Gıda Ürünlerinin Rolü ve Geleneksel Gıdalarda İnovasyon Belirleyicileri Üzerine Bir Çalışma: Afyon Örneği(A Study Based On “The Role Of Traditional Food Products On Regional Development” and “Innovation Characteristics of Traditional Food Products”: Example of Afyon

Directory of Open Access Journals (Sweden)

Nurdan KUŞAT

2012-01-01

Full Text Available Alteration emerged with competition that has increased with globalisation in the world economies, especially after 1980s., has brought into question differentiation and innovation in brief. Sustainability of both firms and countries has come to a state related to innovation in that new economical system. Turkey stands out with its production potential in industrial products based on agriculture. That research will be carried in a food sub-sector which has get famous with its traditional structure in today’s progressive and changing food sector, not in a food sub-sector which produces by using advanced technology in modern context, in Turkey. That sub-sector which has get famous with its traditional structure is a “Confectionary, Cacao, and Chocolate Sub-sector”. General aim is to evaluate competitive capacity of that sub-sector, which emphasises traditional products, by revealing innovation characteristic.

Exports of Palm Oil from Ghana: A Demand Analysis

OpenAIRE

Kuwornu, John K.M.; Darko, Francis A.; Osei-Asare, Yaw B.; Egyir, Irene S.

2009-01-01

Studies have shown that the economy of Ghana cannot afford to rely solely on cocoa exports. It is imperative to diversify the export base of the Ghanaian economy. In this respect, the palm oil sub-sector of the agricultural sector, which until the early part of the 20th century was the major agricultural export commodity of Ghana, needs to be considered for promotion. Currently the palm oil industry faces the challenge of bleak export potential. This study examines trends in the quantity expo...

Valor económico agregado en las empresas del sector industrial manufacturero de Cúcuta periodo 2008-2012

Directory of Open Access Journals (Sweden)

Jhon Antuny Pabón-León

2015-07-01

Full Text Available Background: The manufacturing industry in Cúcuta is considered important because of the relevance of this sector of the economy either due to demand for products and services, employment generation and economic impact on different other economic activities on the city. Objective: This paper makes part of a research on value creation in the manufacturing sector of Cúcuta Colombia Norte de Santander Department in 2008-2012. It is intended to describe the behavior of this indicator in the sector. Methods: The study was developed with a quantitative approach; the scope of the research was descriptive with a non- experimental design. For this, a trend analysis of financial indicators related to value creation based on accounting information was made. Results: This research found that no value is created in the sector or in any of the subsectors studied during five years; this is due to the decrease in operating income and rising inventories coupled with the fact that cost of capital is high compared to the performance of equity. Conclusions: There is low industrial vocation in the city, less contribution of the sector on the GDP year after year, hence regional economy has been affected in both social and economic indicators.

Exergetic assessment for resources input and environmental emissions by Chinese industry during 1997-2006.

Science.gov (United States)

Zhang, Bo; Peng, Beihua; Liu, Mingchu

2012-01-01

This paper presents an overview of the resources use and environmental impact of the Chinese industry during 1997-2006. For the purpose of this analysis the thermodynamic concept of exergy has been employed both to quantify and aggregate the resources input and the environmental emissions arising from the sector. The resources input and environmental emissions show an increasing trend in this period. Compared with 47568.7 PJ in 1997, resources input in 2006 increased by 75.4% and reached 83437.9 PJ, of which 82.5% came from nonrenewable resources, mainly from coal and other energy minerals. Furthermore, the total exergy of environmental emissions was estimated to be 3499.3 PJ in 2006, 1.7 times of that in 1997, of which 93.4% was from GHG emissions and only 6.6% from "three wastes" emissions. A rapid increment of the nonrenewable resources input and GHG emissions over 2002-2006 can be found, owing to the excessive expansion of resource- and energy-intensive subsectors. Exergy intensities in terms of resource input intensity and environmental emission intensity time-series are also calculated, and the trends are influenced by the macroeconomic situation evidently, particularly by the investment-derived economic development in recent years. Corresponding policy implications to guide a more sustainable industry system are addressed.

Empirical analysis of industrial operations in Montenegro

Directory of Open Access Journals (Sweden)

Galić Jelena

2012-12-01

Full Text Available Since the starting process of transition, industrial production in Montenegro has been faced with serious problems and its share in GDP is constantly decreasing. Global financial crises had in large extent negatively influenced industry. Analysis of financial indicators showed that industry had significant losses, problem of undercapitalisation and liquidity problems. If we look by industry sectors, than situation is more favourable in the production of electricity, gas and water compared to extracting industry and mining. In paper is proposed measures of economic policy in order to improve situation in industry.

A national inventory of greenhouse gas (GHG), criteria air contaminants (CAC) and hydrogen sulphide (H2S) emissions by the upstream oil and gas industry : volume 1, overview of the GHG emissions inventory : technical report

International Nuclear Information System (INIS)

2004-09-01

A detailed inventory of greenhouse gas (GHG) emissions from the upstream oil and gas sector in Canada was presented along with explanations of the methodologies and data sources used. This report is based on previous work done on methane and volatile organic compound emissions from the upstream oil and gas sector for the period of 1990 to 1995, but it includes key improvements in identifying primary types of emissions sources such as emissions from fuel combustion, flaring, venting, fugitive equipment leaks and accidental releases. It also includes criteria air contaminants and hydrogen sulfide emissions, an analysis of GHG emission intensities and a change in the definition of volatile organic compounds from comprising all non-methane hydrocarbons to comprising all non-methane and non-ethane hydrocarbons. The report covers portions of the upstream oil and gas industry in Canada plus the natural gas transmission and natural gas distribution industries with reference to well drilling, oil production, and natural gas production, processing, transmission and distribution. Accidents and equipment failures are also included. The report reveals the total GHG emissions by source type, sub-sector, facility type and sub-type for the year 2000 at the national level. In 2000, the total carbon dioxide equivalent GHG emissions from the entire oil and gas sector were 101,211 kilo tonnes. For the upstream oil and gas sector alone, total GHG emissions were 84,355 kilo tonnes, representing 12 per cent of Canada's total national emissions of GHGs in 2000. This is an increase of about 25 per cent from 1995 levels. The biggest primary source of these emissions is fuel combustion, which accounts for 40.8 per cent of the total. This report also includes a provincial breakdown of GHG emissions for the natural gas transmission, storage and distribution sub-sectors in Canada for the year 2000. refs., tabs., figs

Exergetic Assessment for Resources Input and Environmental Emissions by Chinese Industry during 1997–2006

Directory of Open Access Journals (Sweden)

Bo Zhang

2012-01-01

Full Text Available This paper presents an overview of the resources use and environmental impact of the Chinese industry during 1997–2006. For the purpose of this analysis the thermodynamic concept of exergy has been employed both to quantify and aggregate the resources input and the environmental emissions arising from the sector. The resources input and environmental emissions show an increasing trend in this period. Compared with 47568.7 PJ in 1997, resources input in 2006 increased by 75.4% and reached 83437.9 PJ, of which 82.5% came from nonrenewable resources, mainly from coal and other energy minerals. Furthermore, the total exergy of environmental emissions was estimated to be 3499.3 PJ in 2006, 1.7 times of that in 1997, of which 93.4% was from GHG emissions and only 6.6% from “three wastes” emissions. A rapid increment of the nonrenewable resources input and GHG emissions over 2002–2006 can be found, owing to the excessive expansion of resource- and energy-intensive subsectors. Exergy intensities in terms of resource input intensity and environmental emission intensity time-series are also calculated, and the trends are influenced by the macroeconomic situation evidently, particularly by the investment-derived economic development in recent years. Corresponding policy implications to guide a more sustainable industry system are addressed.

Comparing public and private sector employees' innovative behaviour

DEFF Research Database (Denmark)

Bysted, Rune; Hansen, Jesper Rosenberg

2015-01-01

Innovation is argued to be of key importance in the public sector. Little is known about possible sector differences in innovative behaviour. The stereotype in literature is that public employees are less innovative. We analyse whether sector is associated with innovative behaviour...... and the influence of job/organizational characteristics. We test this by using a three-country representative survey in Scandinavia with 8,310 respondents. We control for subsectors/industries and job functions. We do not find that public employees are less innovative. Furthermore, the study emphasizes...... the importance of understanding the major differences in innovative behaviour between different subsectors/industries and job types....

Critical analysis of industrial electron accelerators

Energy Technology Data Exchange (ETDEWEB)

Korenev, S. E-mail: sergey_korenev@steris.com

2004-10-01

The critical analysis of electron linacs for industrial applications (degradation of PTFE, curing of composites, modification of materials, sterilization and others) is considered in this report. Main physical requirements for industrial electron accelerators consist in the variations of beam parameters, such as kinetic energy and beam power. Questions for regulation of these beam parameters are considered. The level of absorbed dose in the irradiated product and throughput determines the main parameters of electron accelerator. The type of ideal electron linac for industrial applications is discussed.

Critical analysis of industrial electron accelerators

Science.gov (United States)

Korenev, S.

2004-09-01

The critical analysis of electron linacs for industrial applications (degradation of PTFE, curing of composites, modification of materials, sterlization and others) is considered in this report. Main physical requirements for industrial electron accelerators consist in the variations of beam parameters, such as kinetic energy and beam power. Questions for regulation of these beam parameters are considered. The level of absorbed dose in the irradiated product and throughput determines the main parameters of electron accelerator. The type of ideal electron linac for industrial applications is discussed.

Critical analysis of industrial electron accelerators

International Nuclear Information System (INIS)

Korenev, S.

2004-01-01

The critical analysis of electron linacs for industrial applications (degradation of PTFE, curing of composites, modification of materials, sterilization and others) is considered in this report. Main physical requirements for industrial electron accelerators consist in the variations of beam parameters, such as kinetic energy and beam power. Questions for regulation of these beam parameters are considered. The level of absorbed dose in the irradiated product and throughput determines the main parameters of electron accelerator. The type of ideal electron linac for industrial applications is discussed

Occupational injuries and diseases in Alberta : lost-time claims and claim rates in the upstream oil and gas industries, 2001 to 2005

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-07-15

In order to provide a detailed review of workplace health and safety, the Alberta Ministry of Human Resources and Employment prepares an annual report on the occupational injuries and diseases in the upstream oil and gas industries. The purpose of the report is to provide government, employers, workers, and health and safety professionals with information about key health and safety issues. This report presented estimations of the risk of injury or disease at the provincial, industry sector and subsector level as well as general descriptions about the incidents and injured workers. It also revealed the fatality rates for the major industry sectors as well as the occupational fatalities that the Workers Compensation Board (WCB) accepted for compensation. The number of employers that earned a certificate of recognition was also identified. The injury and disease analysis was discussed in terms of injured worker characteristics; nature of injury or disease; part of body injured; source of injury or disease; type of event or exposure; and duration of disability. The report also provided terms, definitions and formulas and upstream oil and gas WCB industry codes. It was found that in 2005, the WCB accepted 1,481 lost-time claims from upstream oil and gas workers, representing 4.2 per cent of all lost-time claims in the province. In addition, employers with 20 to 39 person-years had the highest lost-time claim rate of 2.4 per 100 person-years. tabs., figs., 2 appendices.

Decomposition Analysis of Wastewater Pollutant Discharges in Industrial Sectors of China (2001–2009 Using the LMDI I Method

Directory of Open Access Journals (Sweden)

Beidou Xi

2012-06-01

Full Text Available China’s industry accounts for 46.8% of the national Gross Domestic Product (GDP and plays an important strategic role in its economic growth. On the other hand, industrial wastewater is also the major source of water pollution. In order to examine the relationship between the underlying driving forces and various environmental indicators, values of two critical industrial wastewater pollutant discharge parameters (Chemical Oxygen Demand (COD and ammonia nitrogen (NH₄-N, between 2001 and 2009, were decomposed into three factors: i.e., production effects (caused by change in the scale of economic activity, structure effects (caused by change in economic structure and intensity effects (caused by change in technological level of each sector, using additive version of the Logarithmic Mean Divisia Index (LMDI I decomposition method. Results showed that: (1 the average annual effect of COD discharges in China was −2.99%, whereas the production effect, the structure effect, and the intensity effect were 14.64%, −1.39%, and −16.24%, respectively. Similarly, the average effect of NH₄-N discharges was −4.03%, while the production effect, the structure effect, and the intensity effect were 16.18%, −2.88%, and −17.33%, respectively; (2 the production effect was the major factor responsible for the increase in COD and NH₄-N discharges, accounting for 45% and 44% of the total contribution, respectively; (3 the intensity effect, which accounted for 50% and 48% of the total contribution, respectively, exerted a dominant decremental effect on COD and NH₄-N discharges; intensity effect was further decomposed into cleaner production effect and pollution abatement effect with the cleaner production effect accounting for 60% and 55% of the reduction of COD and NH₄-N, respectively; (4 the major contributors to incremental COD and NH₄-N discharges were divided among industrial sub-sectors

The approach to risk analysis in three industries

International Nuclear Information System (INIS)

Garrick, B.J.

1991-01-01

It is the purpose of this paper to review how risk and safety analysis is performed in the three major industries of nuclear power, space flight, and chemical and petroleum processes. The underlying reason for such a review is the belief that efficiencies and safety enhancements may result from a greater exchange of risk assessment technology between these industries. The thrust of this discussion related to the engineered systems involved in the three industries. The industries are very different. The chemical industry epitomizes the highly competitive private sector and its bottom-line emphasis; the nuclear power industry is unique by the degree to which it is regulated; and the space industry is essentially a government business just beginning to have commercial implications. Institutional differences are extreme; however, from a societal needs, and their safety implications have a far reaching impact on public opinion and support. In reviewing the risk and safety analysis activities, particular attention is given to the use of such quantitative approaches as probabilistic risk assessment (PRA) as it has evolved in the nuclear power industry

Inpo/industry job and task analysis efforts

International Nuclear Information System (INIS)

Wigley, W.W.

1985-01-01

One of the goals of INPO is to develop and coordinate industrywide programs to improve the education, training and qualification of nuclear utility personnel. To accomplish this goal, INPO's Training and Education Division: conducts periodic evaluations of industry training programs; provides assistance to the industry in developing training programs; manages the accreditation of utility training programs. These efforts are aimed at satisfying the need for training programs for nuclear utility personnel to be performance-based. Performance-based means that training programs provide an incumbent with the skills and knowledge required to safely perform the job. One of the ways that INPO has provided assistance to the industry is through the industrywide job and task analysis effort. I will discuss the job analysis and task analysis processes, the current status of JTA efforts, JTA products and JTA lessons learned

Methodology сomparative statistical analysis of Russian industry based on cluster analysis

Directory of Open Access Journals (Sweden)

Sergey S. Shishulin

2017-01-01

Full Text Available The article is devoted to researching of the possibilities of applying multidimensional statistical analysis in the study of industrial production on the basis of comparing its growth rates and structure with other developed and developing countries of the world. The purpose of this article is to determine the optimal set of statistical methods and the results of their application to industrial production data, which would give the best access to the analysis of the result.Data includes such indicators as output, output, gross value added, the number of employed and other indicators of the system of national accounts and operational business statistics. The objects of observation are the industry of the countrys of the Customs Union, the United States, Japan and Erope in 2005-2015. As the research tool used as the simplest methods of transformation, graphical and tabular visualization of data, and methods of statistical analysis. In particular, based on a specialized software package (SPSS, the main components method, discriminant analysis, hierarchical methods of cluster analysis, Ward’s method and k-means were applied.The application of the method of principal components to the initial data makes it possible to substantially and effectively reduce the initial space of industrial production data. Thus, for example, in analyzing the structure of industrial production, the reduction was from fifteen industries to three basic, well-interpreted factors: the relatively extractive industries (with a low degree of processing, high-tech industries and consumer goods (medium-technology sectors. At the same time, as a result of comparison of the results of application of cluster analysis to the initial data and data obtained on the basis of the principal components method, it was established that clustering industrial production data on the basis of new factors significantly improves the results of clustering.As a result of analyzing the parameters of

Quantitative phase analysis in industrial research

International Nuclear Information System (INIS)

Ahmad Monshi

1996-01-01

X-Ray Diffraction (XRD) is the only technique able to identify phase and all the other analytical techniques give information about the elements. Quantitative phase analysis of minerals and industrial products is logically the next step after a qualitative examination and is of great importance in industrial research. Since the application of XRD in industry, early in this century, workers were trying to develop quantitative XRD methods. In this paper some of the important methods are briefly discussed and partly compared. These methods are Internal Standard, Known Additions, Double Dilution, External Standard, Direct Comparison, Diffraction Absorption and Ratio of Slopes

Steel Industry Marginal Opportunity Analysis

Energy Technology Data Exchange (ETDEWEB)

none,

2005-09-01

The Steel Industry Marginal Opportunity Analysis (PDF 347 KB) identifies opportunities for developing advanced technologies and estimates both the necessary funding and the potential payoff. This analysis determines what portion of the energy bandwidth can be captured through the adoption of state-of-the-art technology and practices. R&D opportunities for addressing the remainder of the bandwidth are characterized and plotted on a marginal opportunity curve.

Energy and Exergy Analysis of the Danish Industry Sector

DEFF Research Database (Denmark)

Bühler, Fabian; Nguyen, Tuong-Van; Elmegaard, Brian

2015-01-01

% to 56% in 2012. Industries with high-temperature processes, such as the cement and metal production sectors, present the highest exergy efficiencies but the lowest energy ones. The opposite conclusion is drawn for the food, paper and chemical industries. The exergy losses, which indicate the potential......A detailed analysis of the Danish industry is presented in this paper using the energy, exergy and embodied exergy methods. The 22 most energy-intensive process industries, which represent about 80% of the total primary energy use of the industry, were modelled and analysed in details for the years...... is not seen with the embodied exergy efficiency, which remains at around 29% for the Danish industry. This analysis shows that there are still large potentials to recover waste heat in most Danish industrial sectors and thus to increase their efficiencies....

Decoupling Economic Growth and Energy Use. An Empirical Cross-Country Analysis for 10 Manufacturing Sectors

Energy Technology Data Exchange (ETDEWEB)

Mulder, P. [International Institute for Applied Systems Analysis, Laxenburg (Austria); De Groot, H.L.F. [Faculty of Economics and Business Administration, Vrije Universiteit, Amsterdam (Netherlands)

2004-07-01

This paper provides an empirical analysis of decoupling economic growth and energy use and its various determinants by exploring trends in energy- and labour productivity across 10 manufacturing sectors and 14 OECD countries for the period 1970-1997. We explicitly aim to trace back aggregate developments in the manufacturing sector to developments at the level of individual subsectors. A cross-country decomposition analysis reveals that in some countries structural changes contributed considerably to aggregate manufacturing energy-productivity growth and, hence, to decoupling, while in other countries they partly offset energy-efficiency improvements. In contrast, structural changes only play a minor role in explaining aggregate manufacturing labour-productivity developments. Furthermore, we find labour-productivity growth to be higher on average than energy-productivity growth. Over time, this bias towards labour-productivity growth is increasing in the aggregate manufacturing sector, while it is decreasing in most manufacturing subsectors.

Achieving the economic potential for industrial cogeneration in Ontario: A financial perspective on electric utility policy

International Nuclear Information System (INIS)

Diemer, S.G.; Cain, S.R.

1993-01-01

The impact of private vs public ownership regimes on the magnitude of achievable industrial cogeneration capacity in Ontario is assessed. Estimates of technical and economic potential are presented for several industrial subsectors and heat demand categories, showing that nearly all of the technically feasible 7,600 MW is also economically efficient given a value of power of at least 4 cents/kWh in 1991 dollars. Using financial data and investment criteria specific to the two forms of ownership, the project evaluation model points to a significantly larger quantum of financial (achievable) potential with public rather than private development of industrial cogeneration. At avoided costs and associated buyback rates of 4 and 5 cents/kWh, the achievable cogeneration capacities are ca 2,400 and 7,600 MW under public ownership and 132 and 3,000 MW under private ownership. Ratepayer savings are significant: the full economic potential can be achieved through public ownership at a buyback rate of 5 cents/kWh; under private ownership, a comparable capacity requires a 6 cents buyback rate, reflecting additional ratepayer costs of nearly $600 million annually. 1 fig., 4 tabs

Joint Egypt/United States report on Egypt/United States cooperative energy assessment. Volume 3 of 5 Vols. Annexes 2--5

Energy Technology Data Exchange (ETDEWEB)

1979-04-01

The principal objectives of the energy assessment project for Egypt are to develop understanding of the current status of the principal energy users in Egypt's industrial and agricultural sectors; to estimate the energy demand and efficiency for each selected subsector within these major sectors; to identify opportunities for fuel type changes, technology switches, or production pattern changes which might increase the efficiency with which Egypt's energy is used both now and in the future; and based on options identified, to forecast energy efficiencies for selected Egyptian subsectors for the years 1985 and 2000. The areas studied in the industrial sector are the iron and steel, aluminum, fertilizer, chemical, petrochemical, cement, textile, and automotive manufacturing industries. Those studied in the agricultural sector concern drainage and irrigation, mechanization, and food processing. Additional information in 4 annexes include industrial/agricultural sector options; residential/commercial, transportation, and fossil fuels supply options.

Structural analysis of engineering consulting and design industry

OpenAIRE

Gabriel Sorin STROE

2013-01-01

Strategic management models have been evolving in the business domain on a continuous basis but the overwhelming majority of works in this field gives the impression that it is only the manufacturing industry that needs strategy and strategic models, or that the strategy in the professional services industry is the same as in the manufacturing industry despite their distinctive characteristics and managerial implications. By using the Porter’s Five Forces framework for industry analysis, whic...

Large-scale educational telecommunications systems for the US: An analysis of educational needs and technological opportunities

Science.gov (United States)

Morgan, R. P.; Singh, J. P.; Rothenberg, D.; Robinson, B. E.

1975-01-01

The needs to be served, the subsectors in which the system might be used, the technology employed, and the prospects for future utilization of an educational telecommunications delivery system are described and analyzed. Educational subsectors are analyzed with emphasis on the current status and trends within each subsector. Issues which affect future development, and prospects for future use of media, technology, and large-scale electronic delivery within each subsector are included. Information on technology utilization is presented. Educational telecommunications services are identified and grouped into categories: public television and radio, instructional television, computer aided instruction, computer resource sharing, and information resource sharing. Technology based services, their current utilization, and factors which affect future development are stressed. The role of communications satellites in providing these services is discussed. Efforts to analyze and estimate future utilization of large-scale educational telecommunications are summarized. Factors which affect future utilization are identified. Conclusions are presented.

77 FR 51465 - Federal Housing Administration: Strengthening Risk Management Through Responsible FHA-Approved...

Science.gov (United States)

2012-08-24

... equal to ``the size standard for its industry classification established by the Small Business Administration at 13 CFR 121.201 Sector 52 (Finance and Insurance), Subsector 522 (Credit Intermediation and... approved lender or mortgagee that exceeds the size standard for its industry classification established by...

Multi-sectoral decomposition in decoupling industrial growth from carbon emissions in the developed Jiangsu Province, China

International Nuclear Information System (INIS)

Lu, Qinli; Yang, Hong; Huang, Xianjin; Chuai, Xiaowei; Wu, Changyan

2015-01-01

ICE (Industrial carbon emission) is one of most important sources of anthropogenic carbon emissions. To reduce the carbon emissions, many countries, particularly China, have adjusted their industrial structures and improved energy efficiency. The complete decomposition technique and decoupling method were used to investigate and quantitatively analyze the main factors influencing the energy-related ICE in Jiangsu, the Chinese province with the largest energy consumption and carbon emissions. The importance of the sectoral dimension was taken into account by dividing the industry into three main departments consisting of 38 sub-sectors. The results indicated that the industry of Jiangsu was in a weak decoupling state from 2005 to 2012. The industrial output growth was the biggest driver of the increase in ICE, while energy efficiency advancement was the main cause for the reduction, in a weakening trend. The year of 2008 was an important breaking point when the optimization of industry structure came into play and global financial crisis took place. The biggest dilemma in Jiangsu is heavy industry is still dominant, especially the five sectors of them made the biggest contribution (88.2%) to ICE. Thankfully, there were five manufacturing industries had achieved low carbon economy at various degrees. - Highlights: • Multi-sectoral decomposition and decoupling were conducted to evaluate the ICE. • The industry of Jiangsu was in a weak decoupling state with an increasing trend. • The industrial output growth was the biggest driver for ICE from 2005 to 2012. • The optimization of industry structure came into play for the reduction since 2008. • Five backward and advanced industries were identified

Energy and exergy use in public and private sector of Saudi Arabia

Energy Technology Data Exchange (ETDEWEB)

Dincer, I. E-mail: idincer@kfupm.edu.sa; Hussain, M.M.; Al-Zaharnah, I

2004-09-01

In this paper, we deal with the analysis of energy and exergy utilization in the public and private sector of Saudi Arabia by considering the energy and exergy flows for the years between 1990 and 2001. Energy and exergy analyses for the public and private sector are undertaken to study the energy and exergy efficiencies. These sectoral efficiencies are then compared, and energy and exergy flow diagrams for the public and private sector over the years are presented, respectively. Energy and exergy efficiencies of the public and private sector are compared for its six sub-sectors, namely commercial, governmental, streets, Mosques, hospitals and charity associations, particularly illustrated for the year 2000. Hospital sub-sector appears to be the most energy efficient sector and government sub-sector the most exergy efficient one. The results presented here provide insights into the sectoral energy use that may assist energy policy makers for the country. It is believed that the present techniques are useful for analyzing sectoral energy and exergy utilization, and that they provide Saudi Arabia with energy savings through energy efficiency and/or energy conservation measures. It is also be helpful to establish standards to facilitate application in industry and in other planning processes such as energy planning.

Energy and exergy use in public and private sector of Saudi Arabia

International Nuclear Information System (INIS)

Dincer, I.; Hussain, M.M.; Al-Zaharnah, I.

2004-01-01

In this paper, we deal with the analysis of energy and exergy utilization in the public and private sector of Saudi Arabia by considering the energy and exergy flows for the years between 1990 and 2001. Energy and exergy analyses for the public and private sector are undertaken to study the energy and exergy efficiencies. These sectoral efficiencies are then compared, and energy and exergy flow diagrams for the public and private sector over the years are presented, respectively. Energy and exergy efficiencies of the public and private sector are compared for its six sub-sectors, namely commercial, governmental, streets, Mosques, hospitals and charity associations, particularly illustrated for the year 2000. Hospital sub-sector appears to be the most energy efficient sector and government sub-sector the most exergy efficient one. The results presented here provide insights into the sectoral energy use that may assist energy policy makers for the country. It is believed that the present techniques are useful for analyzing sectoral energy and exergy utilization, and that they provide Saudi Arabia with energy savings through energy efficiency and/or energy conservation measures. It is also be helpful to establish standards to facilitate application in industry and in other planning processes such as energy planning

Kinematics Control and Analysis of Industrial Robot

Science.gov (United States)

Zhu, Tongbo; Cai, Fan; Li, Yongmei; Liu, Wei

2018-03-01

The robot’s development present situation, basic principle and control system are introduced briefly. Research is mainly focused on the study of the robot’s kinematics and motion control. The structural analysis of a planar articulated robot (SCARA) robot is presented,the coordinate system is established to obtain the position and orientation matrix of the end effector,a method of robot kinematics analysis based on homogeneous transformation method is proposed, and the kinematics solution of the robot is obtained.Establishment of industrial robot’s kinematics equation and formula for positive kinematics by example. Finally,the kinematic analysis of this robot was verified by examples.It provides a basis for structural design and motion control.It has active significance to promote the motion control of industrial robot.

SOVT analysis of the nuclear industry in Mexico

International Nuclear Information System (INIS)

Fernandez R, E.; Hernandez B, M. C.

2011-11-01

In this work the analysis of strengths, opportunities, vulnerabilities and threats (SOVT) of the nuclear industry in Mexico is presented. This industry presents among its strengths that Mexico is a highly electrified country and has a good established normative mark of nuclear security. Although the Secretaria de Energia in Mexico, with base to the exposed in the Programa Sectorial de Energia 2007-2012, is analyzing the convenience of the generation starting from this source, considering the strong technological dependence of the exterior and the limited federal budget dedicated to this field. As a result of the analysis of the SOVT matrix, were found a great number of strengths that threats, although the vulnerabilities list is major to the strengths, the opportunities list is the bigger. Therefore, the nuclear industry can be a sustainable industry, taking the necessary decisions and taking advantage of the detected opportunities. (Author)

Business investment in research and development (R-D: business strategy for the 21st century in Puerto Rico?

Directory of Open Access Journals (Sweden)

Manuel Lobato Vico

2013-10-01

Full Text Available Two thirds (67% of total investment in Research and Development (R-D activities in Puerto Rico is made by the business sector. This paper analyzes the data from the Pilot Survey on Research and Development and finds that a group of startups or new enterprises focused on R-D activities has been developed, but the total amount of R-D investment is not enough to consider this as a generalized strategy or one of deep impact on the economy. Corporate investment in R-D in Puerto Rico is strongly associated with subsidiaries of multinational corporations from the United States, as well as with specific industrial subsectors, in particular with the chemical industry (pharmaceutical and the subsector of research and development services.

Inventory and Policy Reduction Potential of Greenhouse Gas and Pollutant Emissions of Road Transportation Industry in China

Directory of Open Access Journals (Sweden)

Ye Li

2016-11-01

Full Text Available In recent years, emissions from the road transportation industry in China have been increasing rapidly. To evaluate the reduction potential of greenhouse gas and pollutant emissions of the industry in China, its emission inventory was calculated and scenario analysis was created for the period between 2012 and 2030 in this paper. Based on the Long-range Energy Alternatives Planning System (LEAP model, the development of China’s road transportation industry in two scenarios (the business-as-usual (BAU scenario and the comprehensive-mitigation (CM scenario was simulated. In the Comprehensive Mitigation scenario, there are nine various measures which include Fuel Economy Standards, Auto Emission Standards, Energy-saving Technology, Tax Policy, Eco-driving, Logistics Informatization, Vehicle Liquidation, Electric Vehicles, and Alternative Fuels. The cumulative energy and emission reductions of these specific measures were evaluated. Our results demonstrate that China’s road transportation produced 881 million metric tons of CO2 and emitted 1420 thousand tons of CO, 2150 thousand tons of NOx, 148 thousand tons of PM10, and 745 thousand tons of HC in 2012. The reduction potential is quite large, and road freight transportation is the key mitigation subsector, accounting for 85%–92% of the total emission. For energy conservation and carbon emission mitigation, logistics informatization is the most effective method, potentially reducing 1.80 billion tons of coal equivalent and 3.83 billion tons of CO2 from 2012 to 2030. In terms of air pollutant emission mitigation, the auto emission standards measure performs best with respect to NOx, PM10, and HC emission mitigation, and logistic informatization measure is the best in CO emission reduction. In order to maximize the mitigation potential of China’s road transportation industry, the government needs to implement various measures in a timely and strict fashion.

Complexity Analysis of Industrial Organizations Based on a Perspective of Systems Engineering Analysts

Directory of Open Access Journals (Sweden)

I. H. Garbie

2011-12-01

Full Text Available Complexity in industrial organizations became more difficult and complex to be solved and it needs more attention from academicians and technicians. For these reasons, complexity in industrial organizations represents a new challenge in the next decades. Until now, analysis of industrial organizations complexity is still remaining a research topic of immense international interest and they require reduction in their complexity. In this paper, analysis of complexity in industrial organizations is shown based on the perspective of systems engineering analyst. In this perspective, analysis of complexity was divided into different levels and these levels were defined as complexity levels. A framework of analyzing these levels was proposed and suggested based on the complexity in industrial organizations. This analysis was divided into four main issues: industrial system vision, industrial system structure, industrial system operating, and industrial system evaluating. This analysis shows that the complexity of industrial organizations is still an ill-structured and a multi-dimensional problem.

The Quantitative Analysis of Chennai Automotive Industry Cluster

Science.gov (United States)

Bhaskaran, Ethirajan

2016-07-01

Chennai, also called as Detroit of India due to presence of Automotive Industry producing over 40 % of the India's vehicle and components. During 2001-2002, the Automotive Component Industries (ACI) in Ambattur, Thirumalizai and Thirumudivakkam Industrial Estate, Chennai has faced problems on infrastructure, technology, procurement, production and marketing. The objective is to study the Quantitative Performance of Chennai Automotive Industry Cluster before (2001-2002) and after the CDA (2008-2009). The methodology adopted is collection of primary data from 100 ACI using quantitative questionnaire and analyzing using Correlation Analysis (CA), Regression Analysis (RA), Friedman Test (FMT), and Kruskall Wallis Test (KWT).The CA computed for the different set of variables reveals that there is high degree of relationship between the variables studied. The RA models constructed establish the strong relationship between the dependent variable and a host of independent variables. The models proposed here reveal the approximate relationship in a closer form. KWT proves, there is no significant difference between three locations clusters with respect to: Net Profit, Production Cost, Marketing Costs, Procurement Costs and Gross Output. This supports that each location has contributed for development of automobile component cluster uniformly. The FMT proves, there is no significant difference between industrial units in respect of cost like Production, Infrastructure, Technology, Marketing and Net Profit. To conclude, the Automotive Industries have fully utilized the Physical Infrastructure and Centralised Facilities by adopting CDA and now exporting their products to North America, South America, Europe, Australia, Africa and Asia. The value chain analysis models have been implemented in all the cluster units. This Cluster Development Approach (CDA) model can be implemented in industries of under developed and developing countries for cost reduction and productivity

Achieving deep reductions in US transport greenhouse gas emissions: Scenario analysis and policy implications

International Nuclear Information System (INIS)

McCollum, David; Yang, Christopher

2009-01-01

This paper investigates the potential for making deep cuts in US transportation greenhouse gas (GHG) emissions in the long-term (50-80% below 1990 levels by 2050). Scenarios are used to envision how such a significant decarbonization might be achieved through the application of advanced vehicle technologies and fuels, and various options for behavioral change. A Kaya framework that decomposes GHG emissions into the product of four major drivers is used to analyze emissions and mitigation options. In contrast to most previous studies, a relatively simple, easily adaptable modeling methodology is used which can incorporate insights from other modeling studies and organize them in a way that is easy for policymakers to understand. Also, a wider range of transportation subsectors is considered here-light- and heavy-duty vehicles, aviation, rail, marine, agriculture, off-road, and construction. This analysis investigates scenarios with multiple options (increased efficiency, lower-carbon fuels, and travel demand management) across the various subsectors and confirms the notion that there are no 'silver bullet' strategies for making deep cuts in transport GHGs. If substantial emission reductions are to be made, considerable action is needed on all fronts, and no subsectors can be ignored. Light-duty vehicles offer the greatest potential for emission reductions; however, while deep reductions in other subsectors are also possible, there are more limitations in the types of fuels and propulsion systems that can be used. In all cases travel demand management strategies are critical; deep emission cuts will not likely be possible without slowing growth in travel demand across all modes. Even though these scenarios represent only a small subset of the potential futures in which deep reductions might be achieved, they provide a sense of the magnitude of changes required in our transportation system and the need for early and aggressive action if long-term targets are to be met.

Emission intensity in New Zealand manufacturing and the short-run impacts of emissions pricing

International Nuclear Information System (INIS)

Bartleet, Matthew; Iyer, Kris; Numan-Parsons, Elisabeth

2010-01-01

This paper reports the greenhouse gas (GHG) emission intensity of the New Zealand (NZ) manufacturing sector at a combination of industry group and class levels (sub-sectors). The short-run impacts of a price on emissions are investigated with a focus on exporting activities. Sub-sectors that could be materially impacted by an expected range of emissions prices accounted for slightly over 9% of national gross domestic product. It is found that there is much variability of emission intensity within manufacturing and even within sub-sectors. An assessment of trade intensities further indicates that several emissions-intensive activities are also export-intensive. These activities are at most risk of losing competitiveness in the short-run if they are subjected to a price on GHG emissions that their competitors in other countries are not. Emissions reduction policies must take account of trade competitiveness imperatives if NZ is to meet its international GHG emissions target while maintaining manufacturing sector competitiveness. - Research Highlights: →Estimates initial short-term competitiveness impacts of ETS on NZ manufacturing. →Materiality of impacts determined based on firm level emissions and export intensity. →Results suggest that food processing sub-sectors are likely to be most impacted. →Iron and steel processing, and paper and pulp manufacture are impacted as well. →Cumulative GDP share of materially affected sub-sectors slightly over 9%.

External analysis of the smartphone industry in Spain

OpenAIRE

Nájera Aragón, Fernando

2014-01-01

The main purpose of this end-of-grade project will be the external analysis of an industrial sector, in this case the Smartphone industry. The analysis will be based on Porter’s competitive force model, which allows us to study the competition among the sector and what companies are now leading the market and why. Although it is a market in continuous growth worldwide, this project will focus on how the smartphone market works in Spain. The project will be divided in four main parts, intro...

Trends in innovation activities in manufacturing industries across development echelons

Directory of Open Access Journals (Sweden)

Abdullah M. Khan

2017-07-01

Full Text Available This empirical paper explores trends in innovation activities measured by a countries’ total patent application submission intensity relative to its population, and by analyzing U.S. granted patents data for cohorts of developed countries and developing countries. In addition to tabular and graphical analyses, I use a baseline regression model and a variant model thereof to assess the relative influence of a set of aggregate variables on innovation activities in eight manufacturing industries across two cohorts of countries (developed and developing where each cohort contains eight individual countries. Eight industries included in this study are: Chemical, Petroleum, electrical and electronics equipment, machinery, pharmaceutical, plastic, computer, and textile. The cohort of developed countries includes Australia, Canada, Czech Republic, France, Italy, Poland, Switzerland, and the United States. The cohort of developing countries includes Brazil, China, India, Malaysia, Mexico, Russia, South Africa, and Turkey. Per regression results, ethnic diversity is a statistically significant positive determinant of innovation for all industry aggregate patent count for both high income and developing countries. Also, per capita electricity usage, R&D expenditure as percent of GDP, and percent of population with internet access are three positive factors of innovation irrespective of industrial subsectors and position of a country in the development echelon. Interestingly, impact of ICT-services export is statistically significant and innovation boosting in developing countries in the cohort relative to countries in the cohort of developed countries. It also appears that trade openness served as a stronger stimulant of innovation activities for developing countries’ but not as much for the cohort of developed or high-income countries. This paper attempts to extend the literature on cross-country comparison of innovation activities by using two

X-ray analysis in the steel industry

International Nuclear Information System (INIS)

Bourke, T.; Turner, K.

1999-01-01

Full text: The steel industry makes extensive use of X-ray analysis at all stages of the steelmaking process. XRF and XRD techniques, together with the associated techniques of electron probe microanalysis and electron microscopy are key tools for exploration and mine site and process development where detailed grade and mineralogical data is required. In production X-ray analysis is used to monitor and control: mine product grade (eg iron ore, coal and other raw materials), steel making production processes (eg iron ore sinter, incoming raw materials), waste products (eg coal watery refuse, slags) and final products (eg paint coatings, customer complaints). The demands put on X-ray analysis by the Steel Industry are severe. Iron ore mining and steelmaking is a continuous process, hence instrumentation has to be robust and reliable. In addition, with ever tightening environmental controls there is an increasing demand for trace heavy element analysis in both raw and waste materials. Copyright (1999) Australian X-ray Analytical Association Inc

Impact of Employment Agglomeration on Patented Innovation in U.S. Manufacturing Industries from 1986 to 2008

Directory of Open Access Journals (Sweden)

Abdullah M. Khan

2014-10-01

Full Text Available This paper examines impact of employment agglomeration in fifteen U.S. manufacturing industries on their innovation activities measured by patent count. A count data model is employed in regressing patent count on employment agglomeration measures, measure of scale, and some control variables. Measures of employment agglomeration and market concentration are found to have negative impacts on innovation in U.S. manufacturing industries. Two agglomeration proxies -Gini index and Ellison-Glaeser index have a negative influence on U.S. patented innovation for the study period. This result implies that the external benefit of spatial agglomeration of similar firms has waned down. The impact of market concentration is also found to be a negative factor for innovation. This result implies that firms with larger plant size are less innovative than those with smaller plant size. Impact of ‘share of workers with post graduate degrees’ on innovation was found to be a positive but statistically not significant factor for innovation. The ‘goods pooling’ determinant displayed negative influence on innovation. These results are mostly consistent across fifteen manufacturing subsectors. Rising energy cost is found to be one of the most significant deterrents of innovation whereas, ethnic diversity is found to be a significant facilitator of it. Results of this research lend support in favor of regional economic development policies that promote coagglomeration of various interdependent and complementary industries and small scale industries, and supports ethnic diversity to spur innovation in U.S. manufacturing industries.

The spanish nuclear choice

International Nuclear Information System (INIS)

Martin Blazquez, C.

1983-12-01

The aim of this thesis was to examine the present state and projections of the nuclear energy development in Spain, the limits and conditions of this development, as also the industrial and politic-economical stakes resulting. The analysis is considered through the evolution of the energetic balance up to 1990, taking into account the exceptional role of the nuclear energy: description of the various economic and social development plans since 1964, history of the energy consumption in Spain, structures of the nuclear sector (mining, production, and the private industry), importance of the electric energy in the spanish industry, structures of the electric sector in Spain, roles and interventions of the government in the nuclear electric subsector

Activation analysis in gold industry

International Nuclear Information System (INIS)

Kist, A. A.

2003-01-01

Nuclear techniques and methods were, are, and will be very important for many fields of science, agriculture, industry, etc. Among other examples one can remember role of the nuclear medicine (radiotherapy and radiodiagnostic methods) or semiconductors (communication, computing, information, etc.) which industrial production has been on initial stage based on activation analysis. One of very illustrative examples is application of nuclear methods in gold industry. This is given by favorable nuclear properties of gold. Uzbekistan is one of the main producers of gold. Open-cast mining and hydro metallurgic extraction (using leaching by cyanide and sorption by ion-exchange resin) is the mostly used technology. The typical gold ores are sulfide and contain elevated concentration of As and Sb. That needs special technology of gold extraction. Importance of gold for Uzbekistan economy is a reason why for many years there are carried out studies concerning to gold production. These studies include also nuclear methods and their results are successfully used in gold industry. The present paper gives a brief overview for period of 25 years. For many reasons most of these studies were not published before completely. Despite some results are obtained decades ago we decided to present the overview as an example how nuclear methods can cover requirements of the whole process. We are trying to sort these studies according to methods and applications

Industry progress to market a healthful diet to American children and adolescents.

Science.gov (United States)

Kraak, Vivica I; Story, Mary; Wartella, Ellen A; Ginter, Jaya

2011-09-01

The IOM released an expert committee report in 2005 that assessed the nature, extent, and influence of food and beverage marketing practices on the diets and health of American children and adolescents. The report concluded that prevailing marketing practices did not support a healthful diet and offered recommendations for diverse stakeholders to promote a healthful diet. The investigators evaluated progress made by food, beverage, and restaurant companies; trade associations; entertainment companies; and the media to achieve the IOM report recommendations over 5 years. A literature review was conducted of electronic databases and relevant government, industry, and media websites between December 1, 2005, and January 31, 2011. Evidence selection was guided by the IOM LEAD principles (i.e., locate, evaluate, and assemble evidence to inform decisions) and five qualitative-research criteria, and it was validated by data and investigator triangulation. The investigators selected and categorized 117 data sources into two evidence tables used to evaluate industry progress (i.e., no, limited, moderate, and extensive). Food and beverage companies made moderate progress; however, limited progress was made by other industry subsectors. Industry stakeholders used integrated marketing communications (IMC) to promote primarily unhealthy products, which threaten children's and adolescents' health and miss opportunities to promote a healthy eating environment. Diverse industry stakeholders have several untapped opportunities to advance progress by promoting IMC to support a healthful diet; substantially strengthening self-regulatory programs; supporting truthful and non-misleading product labeling and health claims; engaging in partnerships; and funding independent evaluations of collective efforts. Copyright © 2011 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Multi - party Game Analysis of Coal Industry and Industry Regulation Policy Optimization

Science.gov (United States)

Jiang, Tianqi

2018-01-01

In the face of the frequent occurrence of coal mine safety accidents, this paper analyses the relationship between central and local governments, coal mining enterprises and miners from the perspective of multi - group game. In the actual production, the decision of one of the three groups can affect the game strategy of the other of the three, so we should assume the corresponding game order. In this order, the game analysis of the income and decision of the three is carried out, and the game decision of the government, the enterprise and the workers is obtained through the establishment of the benefit matrix and so on. And then on the existing system to optimize the coal industry regulation proposed practical recommendations to reduce the frequency of industry safety accidents, optimize the industry production environment.

The analysis of pricing principles at domestic industrial enterprises

OpenAIRE

I.M. Rjabchenko; V.V. Bozhkova

2013-01-01

The analysis of pricing principles at domestic industrial enterprisesTheoretical and methodological aspects of marketing pricing formation are investigated in the article. The aim of this research is systematization of marketing pricing principles and formation of corresponding offers concerning perfection of a domestic industrial enterprises pricing policy.The results of the analysis. The authors note that pricing principles are important element of pricing methodology which form basic posit...

The proprietary hospital industry: a financial analysis 1972-1982.

Science.gov (United States)

Michel, A; Shaked, I; Daley, J

1985-01-01

This paper evaluates the performance of both specific firms within the American for-profit hospital industry and the industry as a whole. First, traditional financial analysis is used to evaluate individual publicly traded for-profit chains. Then, industry performance from 1973 to 1982 is evaluated using a set of measures based on Modern Portfolio Theory. The traditional financial analysis indicates that the industry seems increasingly profitable as well as increasingly healthy from the perspective of utilizing its assets and reducing its collection period. However, the industry's rapid growth rate has strained its ability to use additional debt funding and has created a potentially dangerous liquidity position. Measures based on Modern Portfolio Theory indicate that the average return of the industry has improved over the past 5 years. However, its risk has also increased. Nevertheless, the increase in risk is more than offset by the increased average return. In addition, recent legislation designed 'to reward the efficient' has introduced a significant degree of uncertainty into the industry's performance for the coming years. Thus, hospitals' ability to maintain the substantial profitability and rate of growth they have experienced over the past decade will depend on how well they will adapt to the changing environment.

ANALISIS IDENTIFIKASI DAN PERANAN SEKTOR PERTANIAN DALAM PEMBANGUNAN WILAYAH DI KABUPATEN CILACAP

Directory of Open Access Journals (Sweden)

Ropingi Ropingi

2009-12-01

Full Text Available This study aimed to identify agriculture sector and sub-sector for region developing; to know of role of agriculture sector and sub-sector for region developing in Cilacap Regency. The used descriptive method, then the data analyze were Location Quotient (LQ Approach, Income Multiplier effect, and Labour Multiplier effect. The research used secondary data, it was Gross Domestic Regional Product of Central Java and Gross Domestic Regional Product of Cilacap Regency based on 2000 constant price along the year of 1999 to 2003 and the labor of Cilacap Regency. The result of the research shows: the basic sectors of Cilacap Regency are manufacture industry, trading, hotel and restaurant sector. The contribution of agriculture sector in Cilacap Regency can be known from the Income Multiplier Effect along the year of analysis. In the labor side shows that the capacity of agriculture employment field more increase and so does the contribution of agriculture sector for the employment in Cilacap Regency.

MODEL OF ANALYSIS IN THE ROMANIAN FOOTWEAR INDUSTRY

OpenAIRE

Dimi OFILEANU

2014-01-01

The aim of this work is to determine the influence that exports of footwear industry have on the turnover of the sector. In the work, a period of 9 years is taken into consideration: from 2004 to 2012, establishing an econometric model of analysis of the connection between the turnover and direct exports of footwear industry in Romania. Based on the analyzed empirical data, the work answers to the following question: what is the influence that exports of footwear industry have on sector’s tur...

Applications of neutrons for laboratory and industrial activation analysis problems

International Nuclear Information System (INIS)

Szabo, Elek; Bakos, Laszlo

1986-01-01

This chapter presents some particular applications and case studies of neutrons in activation analysis for research and industrial development purposes. The reactor neutrons have been applied in Hungarian laboratories for semiconductor research, for analysis of geological (lunar) samples, and for a special comparator measurement of samples. Some industrial applications of neutron generator and sealed sources for analytical problems are presented. Finally, prompt neutron activation analysis is outlined briefly. (R.P.)

Marketing; La comercializacion

Energy Technology Data Exchange (ETDEWEB)

Ortega Cardenas, Jose Luis [Luz y Fuerza del Centro, Mexico, D. F. (Mexico)

1997-12-31

This document covers the subject of marketing in the electric subsector in Mexico, where the population demands greater and better services to satisfy the needs that are of the domestic, commercial, agricultural and industrial type in an environment each time more complex and global. For this reason the electric subsector must respond and collaborate for the attainment of the big strategic national objectives, established in the National Development Plan (1995-2000), respecting the specific objectives pointed out by the Program of the Electric Sector 1995-2000. The perspectives of the demand of the electric service are mentioned, as well as the contribution to the technology to improve the marketing function in the electric subsector, being this one the one that has permitted to make more efficient the marketing function. Therefore, the electric enterprises have before them the challenge and the opportunity of being able to satisfy the population demands in an effective and efficient way and with a spirit of service. A table of users by state and sails of the electric sector in GWh is portrayed [Espanol] El presente documento aborda el tema de la comercializacion en el subsector electrico en Mexico, en donde la poblacion demanda mayores y mejores servicios para satisfacer las necesidades que son de tipo domestico, comercial, agricola e industrial, en un entorno cada vez mas complejo y globalizado. Es por eso que el subsector electrico debe responder y coadyuvar en la consecucion de los grandes objetivos estrategicos nacionales, que se establecieron en el Plan Nacional de Desarrollo 1995-2000, debiendo acatar los objetivos especificos que se senalan en el Programa del Sector de la Energia 1995-2000. Se mencionan las perspectivas de la demanda del servicio de energia electrica, asi como la contribucion de la tecnologia para mejorar la funcion de comercializacion en el subsector electrico, siendo esta la que ha permitido eficientar la funcion de comercializacion. Por

System analysis of industrial waste management: A case study of industrial plants located between Tehran and Karaj

OpenAIRE

Mohammad Amin Karami; Mohsen Sadani; Mehdi Farzadkia; Nezam Mirzaei; Anvar Asadi

2015-01-01

Aims: In this study, management of industrial waste in industries located between Tehran and Karaj in 2009-2010 was examined. Materials and Methods: This is a cross-sectional study which was done by site survey (Iranian environmental protection organization) questionnaire usage and results analysis. This questionnaire was consisted of 45 questions about industrial waste, quantity, quality, and management. A total number of industries with over 50 employees was 283, and Stratified sampling...

Reflections of the Capitalization on Operational Leasing in Transport Subsector Companie's Structure Indicators Listed on Bovespa

Directory of Open Access Journals (Sweden)

Vinícius Gomes Martins

2013-12-01

Full Text Available Leasing is an alternative to financing the acquisition of assets for entities, and it has like modalities the operating procedures and financial leasing. This type of operation has caused several theoretical obstacles, among them the issue of off-balance sheet transactions. To reduce these accounting inconsistencies, the IASB and FASB have been working together to standardize the subject, this result was the publication of Exposure Draft 2010/09 (ED, which promises significant changes in the treatment of such transactions. Given this, this study aimed to analyze the impacts of the proposed changes contained in the ED, as the capitalization of operating leases, in the structure indicators at transportation subsector companies listed on the Bovespa. For this, we used the simulation methodology of the proposals in ED, confirming previous research. After the simulation accomplished, we proceeded with the Student's t test for paired samples, in order to check if the expected changes may cause significant differences in the indicators tested. The evidence points in the year of 2011, an amount of $ 3.8 billion, related to operating leases, not moved by the balance sheet (off-balance sheet of their respective companies. It was also observed that, on average, sample firms have operating leases to pay equivalent to 18.46% equity and 16.14% of debt. Finally, by simulating the proposals in the ED, it was found that the indicators of debt, equity and immobilization of the detention of non-current resources show significant variation from the statistical point of view, due to the capitalization of operating lease balances.

Sanitary Quality of Raw Milk within the Commodity Subsector in Mbarara District and Kampala City in Uganda

Directory of Open Access Journals (Sweden)

N. Grillet

2005-04-01

Full Text Available The sanitary quality of raw milk is an important issue in Uganda for social, economical and health reasons. The present study carried out on the informal raw milk subsector of Uganda highlighted two main issues: (i poor hygiene conditions from the production location all the way to the consumer; (ii lack of an efficient preservation system to limit bacteria development during transportation to Kampala. The bacteria population reached very high levels close to 2 x 106 colony forming units per milliliter on the farm milk of Mbarara District in the southwestern region of the country, and these levels increased 150-fold during transportation to Kampala. The sector also includes rudimentary pasteurization units, where the overheated milk comes out bacteria-free. However, conservation over several days of the overheated milk makes this process potentially more dangerous than beneficial. Thus, the need for all the players of the sector to implement a strategy to improve milk quality can be two ways: (i by changing common practices to ensure better hygiene conditions; (ii by improving milk preserving through new methods such as cooling, small-scale pasteurization, or the use of the lactoperoxidase system. This study can help develop a technical and scientific basis to generate quality improvement actions in Uganda. But, whatever the strategy adopted by decision makers, it can only be implemented if all the stakeholders of the sector are involved.

Possibilities of radioisotopic fluorescence analysis application in copper industry

International Nuclear Information System (INIS)

Parus, J.; Kierzek, J.

1983-01-01

The main applications of X-ray fluorescence analysis in copper industry such as: copper ores and other materials from flotation analysis, lead and silver determination in blister copper, analysis of metallurgic dusts and copper base alloys analysis are presented. (A.S.)

The deregulation of network industries: is the electricity sector an exception?

International Nuclear Information System (INIS)

Coppens, F.; Vivet, D.

2006-01-01

In view of their special characteristics, network industries have for quite a long time been considered as (natural) monopolies. Network externalities and economies of scale in particular justified this (natural) monopoly thesis. Since the last decade of the past century, however, a trend towards deregulation of such industries has been observed worldwide. This trend started with the successful introduction of competition in the telecommunications sector. The success in that sector is often used as an argument for opening up other network industries to competition as well. The study analyses whether this reasoning can be applied to the electricity sector. At first glance, the sectors electricity and telecommunications seem very similar, as both are network industries having been characterised for a long time by economies of scale, but for which technological progress may have put an end to this scale effect. However, the study points out that there are important differences. In the telecommunications sector, technological progress on the supply side has been accompanied by a strong growth in demand. There is no such demand side effect in the electricity branch. Moreover, due to physical characteristics, the electricity sector seems to be more complicated. In order to introduce competition, the sector has to be split up into sub-sectors (production, transmission, distribution and supply). Only two segments, production and supply, are considered as open markets; transmission and distribution, on the other hand, remain monopolies. This splitting up, however, entails a new kind of costs, the so-called transaction costs. As such the gains from the liberalization in certain segments might (partly) offset increase in the transaction costs resulting from vertical disintegration. (authors)

Cost-benefit analysis of the industrial evaluations employing radioactive tracer techniques in the sugar-cane industry

International Nuclear Information System (INIS)

Aguila, D.; Jerez, P.F.

1998-01-01

A practice with radioactivity is justifiable if the benefit that she brings is greater than the detriment to the health that provokes. This is achieved with an optimization of the radiological protection on the base of the principle ALARA (the dose must be at botommost level that reasonably could be reached). The cost-benefit analysis helps to take a decision of practice optimized to use. Based on the cost-benefit criterion in the framework of the industrial radioprotection, was accomplished an industrial evaluations study employing 99mT c and 1 31 I in industry Cuban sugar-bowl. The results of the analysis demonstrated that the use of the 99mT c as radiotracer is the better option to take

The Productivity Analysis of Chennai Automotive Industry Cluster

Science.gov (United States)

Bhaskaran, E.

2014-07-01

Chennai, also called the Detroit of India, is India's second fastest growing auto market and exports auto components and vehicles to US, Germany, Japan and Brazil. For inclusive growth and sustainable development, 250 auto component industries in Ambattur, Thirumalisai and Thirumudivakkam Industrial Estates located in Chennai have adopted the Cluster Development Approach called Automotive Component Cluster. The objective is to study the Value Chain, Correlation and Data Envelopment Analysis by determining technical efficiency, peer weights, input and output slacks of 100 auto component industries in three estates. The methodology adopted is using Data Envelopment Analysis of Output Oriented Banker Charnes Cooper model by taking net worth, fixed assets, employment as inputs and gross output as outputs. The non-zero represents the weights for efficient clusters. The higher slack obtained reveals the excess net worth, fixed assets, employment and shortage in gross output. To conclude, the variables are highly correlated and the inefficient industries should increase their gross output or decrease the fixed assets or employment. Moreover for sustainable development, the cluster should strengthen infrastructure, technology, procurement, production and marketing interrelationships to decrease costs and to increase productivity and efficiency to compete in the indigenous and export market.

Construction and Operation Costs of Wastewater Treatment and Implications for the Paper Industry in China.

Science.gov (United States)

Niu, Kunyu; Wu, Jian; Yu, Fang; Guo, Jingli

2016-11-15

This paper aims to develop a construction and operation cost model of wastewater treatment for the paper industry in China and explores the main factors that determine these costs. Previous models mainly involved factors relating to the treatment scale and efficiency of treatment facilities for deriving the cost function. We considered the factors more comprehensively by adding a regional variable to represent the economic development level, a corporate ownership factor to represent the plant characteristics, a subsector variable to capture pollutant characteristics, and a detailed-classification technology variable. We applied a unique data set from a national pollution source census for the model simulation. The major findings include the following: (1) Wastewater treatment costs in the paper industry are determined by scale, technology, degree of treatment, ownership, and regional factors; (2) Wastewater treatment costs show a large decreasing scale effect; (3) The current level of pollutant discharge fees is far lower than the marginal treatment costs for meeting the wastewater discharge standard. Key implications are as follows: (1) Cost characteristics and impact factors should be fully recognized when planning or making policies relating to wastewater treatment projects or technology development; (2) There is potential to reduce treatment costs by centralizing wastewater treatment via industrial parks; (3) Wastewater discharge fee rates should be increased; (4) Energy efficient technology should become the future focus of wastewater treatment.

The energy demand in the British and German industrial sectors. Heterogeneity and common factors

International Nuclear Information System (INIS)

Agnolucci, Paolo

2009-01-01

This paper estimates energy demands for the German and British industrial sectors over the 1978-2004 and the 1991-2004 samples. From time series models we can conclude that there is a considerable variation in the value of the coefficients across sectors, even though energy demands with sensible parameters can rarely be estimated. When using a panel approach, the ability of some estimators to allow for diversity across subsectors was an important factor in explaining the estimates for price elasticity. On the other hand, correlation across panel members or common factors did not markedly influence our results. With regard to the estimated parameters, our preferred choice for elasticity of economic activity and price in the longer sample is 0.52 and - 0.64. Similar values are found in the case of the shorter samples. Bearing in mind the high price elasticity, energy taxes can be considered an effective strategy for reducing energy consumption. (author)

ANALISIS SISTEM PENGEMBANGAN KAWASAN INDUSTRI TERPADU BERWAWASAN LINGKUNGAN: STUDI KASUS DI PT. KAWASAN INDUSTRI MEDAN (Analysis System of Integrated Industrial Estate Ecodevelopment Case Study: At PT. Medan Industrial Estate

Directory of Open Access Journals (Sweden)

Kimberly Febrina Kodrat

2011-07-01

: economic, ecological, and social aspects. Data are collected through survey method that represents observation, in depth interview, and expert judgment. The research are using hard system methodology (dynamic system as well as soft system methodology (participatory prospective analysis. The result of chi square statistic test (α = 0,01 showed that community group working in Medan Industrial Estate (Kawasan Industri Medan is very significant compared to those working outside of Kawasan Industri Medan, including income, education, and age levels. The results of quality analysis of waste water observed that 5 parameters higher than the standard of waste water, namely: biological oxygen demand, chemical oxygen demand, total suspended solid, chloride and ammonia. The efficiency level of Medan Industrial Estate waste water treatment unit is about 53,07% on average. The result of the interdependency analysis of the influenced factors using participatory prospective analysis generates 5 future strategic factors affecting the integrated industrial estate development, namely: amount of industries, land demand, government policy, development funds, and conducive invesment atmosphere. Environmental purposes for integrated industrial estate development would be using moderat strategy with the following policies: supporting government policy, land vailability in line with its demand, increasing land demand and controlled procedures to implement government regulations

Situational analysis of the Canadian renewable energy sector with a focus on human resource issues : 2007 final report

International Nuclear Information System (INIS)

2007-01-01

Several factors are steering world energy supplies away from traditional fossil fuel sources and toward renewable energy technologies. As a result, renewable energy markets are experiencing significant growth, and experts predict this trend will continue. As of 2004, 2 per cent of Canada's total electricity generation capacity was provided from emerging renewable technologies, excluding large scale hydro which represents 56 per cent of Canada's electricity generation capacity. The development of renewable energy sources in Canada is expected to contribute to Canada's economic prosperity by providing diversified energy supply to industrial buyers, generating direct economic advantages and employment to local communities, as well as direct benefits such as improved air quality and lower greenhouse gas emissions. Human Resources and Social Development Canada contracted the Delphi Group to provide information on the labour market for the renewable energy sector in Canada in order to identify the steps needed to help the sector in developing a human resource strategy. This report provided an overview of key characteristics defining the renewable energy subsectors in Canada along with anticipated changes in the near term. The study focused on the following technologies: wind turbines; photovoltaics; active solar thermal; geoexchange/earth energy; small scale hydropower; bioenergy; and, ocean energy. A reliable estimate of the labour demands in the subsectors over the next 5 to 10 year was presented along with a review of the human resource issues affecting the sector. This project was guided by an advisory committee of members from 4 sector councils; 3 government agencies including Environment Canada, Industry Canada and Natural Resources Canada; 4 industry associations representing bioenergy, geothermal energy, solar energy and wind energy; and other organizations including the Association of Canadian Community Colleges, the Canadian Council of Technicians and

A model for Long-term Industrial Energy Forecasting (LIEF)

Energy Technology Data Exchange (ETDEWEB)

Ross, M. [Lawrence Berkeley Lab., CA (United States)]|[Michigan Univ., Ann Arbor, MI (United States). Dept. of Physics]|[Argonne National Lab., IL (United States). Environmental Assessment and Information Sciences Div.; Hwang, R. [Lawrence Berkeley Lab., CA (United States)

1992-02-01

The purpose of this report is to establish the content and structural validity of the Long-term Industrial Energy Forecasting (LIEF) model, and to provide estimates for the model`s parameters. The model is intended to provide decision makers with a relatively simple, yet credible tool to forecast the impacts of policies which affect long-term energy demand in the manufacturing sector. Particular strengths of this model are its relative simplicity which facilitates both ease of use and understanding of results, and the inclusion of relevant causal relationships which provide useful policy handles. The modeling approach of LIEF is intermediate between top-down econometric modeling and bottom-up technology models. It relies on the following simple concept, that trends in aggregate energy demand are dependent upon the factors: (1) trends in total production; (2) sectoral or structural shift, that is, changes in the mix of industrial output from energy-intensive to energy non-intensive sectors; and (3) changes in real energy intensity due to technical change and energy-price effects as measured by the amount of energy used per unit of manufacturing output (KBtu per constant $ of output). The manufacturing sector is first disaggregated according to their historic output growth rates, energy intensities and recycling opportunities. Exogenous, macroeconomic forecasts of individual subsector growth rates and energy prices can then be combined with endogenous forecasts of real energy intensity trends to yield forecasts of overall energy demand. 75 refs.

A model for Long-term Industrial Energy Forecasting (LIEF)

Energy Technology Data Exchange (ETDEWEB)

Ross, M. (Lawrence Berkeley Lab., CA (United States) Michigan Univ., Ann Arbor, MI (United States). Dept. of Physics Argonne National Lab., IL (United States). Environmental Assessment and Information Sciences Div.); Hwang, R. (Lawrence Berkeley Lab., CA (United States))

1992-02-01

The purpose of this report is to establish the content and structural validity of the Long-term Industrial Energy Forecasting (LIEF) model, and to provide estimates for the model's parameters. The model is intended to provide decision makers with a relatively simple, yet credible tool to forecast the impacts of policies which affect long-term energy demand in the manufacturing sector. Particular strengths of this model are its relative simplicity which facilitates both ease of use and understanding of results, and the inclusion of relevant causal relationships which provide useful policy handles. The modeling approach of LIEF is intermediate between top-down econometric modeling and bottom-up technology models. It relies on the following simple concept, that trends in aggregate energy demand are dependent upon the factors: (1) trends in total production; (2) sectoral or structural shift, that is, changes in the mix of industrial output from energy-intensive to energy non-intensive sectors; and (3) changes in real energy intensity due to technical change and energy-price effects as measured by the amount of energy used per unit of manufacturing output (KBtu per constant $ of output). The manufacturing sector is first disaggregated according to their historic output growth rates, energy intensities and recycling opportunities. Exogenous, macroeconomic forecasts of individual subsector growth rates and energy prices can then be combined with endogenous forecasts of real energy intensity trends to yield forecasts of overall energy demand. 75 refs.

Sustainable Manufacturing Practices in Malaysian Automotive Industry: Confirmatory Factor Analysis

OpenAIRE

Habidin, Nurul Fadly; Zubir, Anis Fadzlin Mohd; Fuz, Nursyazwani Mohd; Latip, Nor Azrin Md; Azman, Mohamed Nor Azhari

2015-01-01

Sustainable manufacturing practices (SMPs) have received enormous attention in current years as an effective solution to support the continuous growth and expansion of the automotive manufacturing industry. This reported study was conducted to examine confirmatory factor analysis for SMP such as manufacturing process, supply chain management, social responsibility, and environmental management based on automotive manufacturing industry. The results of confirmatory factor analysis show that fo...

Idaho–Eastern Oregon Onion Industry Analysis

OpenAIRE

Bolotova, Yuliya; Jemmett, Brian

2010-01-01

The Idaho–Eastern Oregon onion industry operates in a market environment characterized by a high level of onion price and supply volatility. Years of relatively high onion prices are often followed by years of very low prices which do not allow onion growers to recover their onion production costs. This feature of the industry adversely affects the profi tability of onion growers and the economic performance of their industry. This study conducts an analysis of alternative market scenarios ...

Aspects of the risk analysis in the process engineering industry

International Nuclear Information System (INIS)

Hennings, W.; Madjar, M.; Mock, R.; Reer, B.

1996-01-01

This document is the result of a multi-discipline working group of a portion of a project called Risk analysis for chemical plants. Within the framework of the project, only selected methods and tools of risk analysis, thus, aspects of method, were able to be discussed and developed further. Case examples from the chemical industry are dealt with in order to discuss the application of a computer assisted quantitative error analysis in this industrial sector. Included is also a comprehensive documentation of the data and results utilised in the examples. figs., tabs., refs

Measuring the potential of GHG emissions reductions on the food and beverage processing sector in Ontario

International Nuclear Information System (INIS)

Singleton, M.; Ciccone, A.D.

2000-07-01

Seven per cent of the greenhouse gas emissions from the industrial sector in Ontario relate to the food and beverage processing sector. This report provides the Ontario Ministry of Agriculture, Food and Rural Affairs with the ability to identify the effects of reducing greenhouse gas emissions on Ontario's food and beverage processing sector. The study was undertaken in response to Ontario's efforts to address the challenges set by the Kyoto Protocol and the proposed release of Canada's National Implementation Strategy on Climate Change. The objective of the report is to help Ontario decide if it should support a national strategy and/or ratify the Kyoto Protocol. Potential ways to meet the Kyoto commitments were also identified in the report. The study was based on an analysis of large amounts of data and information regarding the economic and technological aspects that affect the food and beverage processing industry in Ontario, including the seven major sub-sectors, located mostly in southern Ontario. The types of plants and their associated processes and fuel use were assessed to determine the size and nature of fuel use and greenhouse gas emissions for each sub-sector. The study examined end uses and base technologies for each sub-sector and compared them with energy efficient technologies and opportunities within the industry. Barriers, and how to overcome them, were also described. Ontario's results were then compared with results from Canada's Foundation Paper and Options Analysis prepared for the Agriculture and Agri-Food Table on Climate Change. It was determined that the primary source of greenhouse gases for the industry comes from the use of energy directly from the combustion of fossil fuels and indirectly from the use of electricity. The contributions to greenhouse gases through chlorofluorocarbons or through waste stream is small and shrinking. It was concluded that mitigation strategies should concentrate on energy conservation through energy

Missouri Industrial Wastewater System Characterization and Analysis, Whiteman Air Force Base

National Research Council Canada - National Science Library

Morgan, James

1998-01-01

.... The IWSCS analysis indicated industrial wastewater treatment plant unit operations were performing significantly below design expectations and the overall volume and character of industrial waste...

Analysis of Alcohol Industry Submissions against Marketing Regulation

Science.gov (United States)

Martino, Florentine Petronella; Miller, Peter Graeme; Coomber, Kerri; Hancock, Linda; Kypri, Kypros

2017-01-01

A growing body of literature points to the role of vested interests as a barrier to the implementation of effective public health policies. Corporate political activity by the alcohol industry is commonly used to influence policy and regulation. It is important for policy makers to be able to critique alcohol industry claims opposed to improved alcohol marketing regulation. The Australian National Preventive Health Agency reviewed alcohol marketing regulations in 2012 and stakeholders were invited to comment on them. In this study we used thematic analysis to examine submissions from the Australian alcohol industry, based on a system previously developed in relation to tobacco industry corporate political activity. The results show that submissions were a direct lobbying tactic, making claims to government that were contrary to the evidence-base. Five main frames were identified, in which the alcohol industry claimed that increased regulation: (1) is unnecessary; (2) is not backed up by sufficient evidence; (3) will lead to unintended negative consequences; and (4) faces legal barriers to implementation; underpinned by the view (5) that the industry consists of socially responsible companies working toward reducing harmful drinking. In contrast with tobacco industry submissions on public policy, which often focused on legal and economic barriers, the Australian alcohol industry placed a heavier emphasis on notions of regulatory redundancy and insufficient evidence. This may reflect differences in where these industries sit on the ‘regulatory pyramid’, alcohol being less regulated than tobacco. PMID:28118411

Analysis of Alcohol Industry Submissions against Marketing Regulation.

Directory of Open Access Journals (Sweden)

Florentine Petronella Martino

Full Text Available A growing body of literature points to the role of vested interests as a barrier to the implementation of effective public health policies. Corporate political activity by the alcohol industry is commonly used to influence policy and regulation. It is important for policy makers to be able to critique alcohol industry claims opposed to improved alcohol marketing regulation. The Australian National Preventive Health Agency reviewed alcohol marketing regulations in 2012 and stakeholders were invited to comment on them. In this study we used thematic analysis to examine submissions from the Australian alcohol industry, based on a system previously developed in relation to tobacco industry corporate political activity. The results show that submissions were a direct lobbying tactic, making claims to government that were contrary to the evidence-base. Five main frames were identified, in which the alcohol industry claimed that increased regulation: (1 is unnecessary; (2 is not backed up by sufficient evidence; (3 will lead to unintended negative consequences; and (4 faces legal barriers to implementation; underpinned by the view (5 that the industry consists of socially responsible companies working toward reducing harmful drinking. In contrast with tobacco industry submissions on public policy, which often focused on legal and economic barriers, the Australian alcohol industry placed a heavier emphasis on notions of regulatory redundancy and insufficient evidence. This may reflect differences in where these industries sit on the 'regulatory pyramid', alcohol being less regulated than tobacco.

Analysis of Alcohol Industry Submissions against Marketing Regulation.

Science.gov (United States)

Martino, Florentine Petronella; Miller, Peter Graeme; Coomber, Kerri; Hancock, Linda; Kypri, Kypros

2017-01-01

A growing body of literature points to the role of vested interests as a barrier to the implementation of effective public health policies. Corporate political activity by the alcohol industry is commonly used to influence policy and regulation. It is important for policy makers to be able to critique alcohol industry claims opposed to improved alcohol marketing regulation. The Australian National Preventive Health Agency reviewed alcohol marketing regulations in 2012 and stakeholders were invited to comment on them. In this study we used thematic analysis to examine submissions from the Australian alcohol industry, based on a system previously developed in relation to tobacco industry corporate political activity. The results show that submissions were a direct lobbying tactic, making claims to government that were contrary to the evidence-base. Five main frames were identified, in which the alcohol industry claimed that increased regulation: (1) is unnecessary; (2) is not backed up by sufficient evidence; (3) will lead to unintended negative consequences; and (4) faces legal barriers to implementation; underpinned by the view (5) that the industry consists of socially responsible companies working toward reducing harmful drinking. In contrast with tobacco industry submissions on public policy, which often focused on legal and economic barriers, the Australian alcohol industry placed a heavier emphasis on notions of regulatory redundancy and insufficient evidence. This may reflect differences in where these industries sit on the 'regulatory pyramid', alcohol being less regulated than tobacco.

Systematic Analysis and Innovation for Development Policies of Beijing Seed Industry at Transformation Stage

Institute of Scientific and Technical Information of China (English)

Qing LIU; Fengjun LU; Guozhi ZHANG; Lijiao XIE

2015-01-01

At transformation stage,seed Industry is not only a fundamental and strategic industry during the construction of World City,but also part of urban and modern agriculture in Beijing. Based on the analysis of the theory of industrial economics and system theory,the article constructs the seed industry policy analysis model,systematically analyzes the support points of national level and the city of Beijing seed industry policy,and studies policy input,mechanism,output and effects by way of systematic analysis,as well as proposes polices and suggestions on promotion of development for Beijing seed industry and on construction of new seed industry from talent incentive,platform construction,seed trading and enterprise cultivation.

Balancing regional industrial development: analysis on regional disparity of China's industrial emissions and policy implications

DEFF Research Database (Denmark)

Liang, Hanwei; Dong, Liang; Luo, Xiao

2016-01-01

Efficient industrial emissions mitigation strategy is critical for China's national action on climate change and sustainable development, considering its rapid industrialization. Regional disparity brings difficulties and uncertainties to policy implementation in China. Therefore, an investigation...... development, and highlight not only disparity, but also inequity exists. It is concluded that, there is a larger unequal distribution of GDP per unit of air pollutants and CO2 emission between eastern and western regions, reveals that less developed western and central regions suffer from the emission leakage...... on the regional features of industrial emissions is critical to better decision makings. While to date, related studies have been rather few. This paper applies a spatial analysis on regional features of China's industrial emissions (SO2, NOx and PM2.5 and CO2 emission) in 31 provinces. Spatial autocorrelation...

Fatal accidents analysis in Peruvian mining industry

International Nuclear Information System (INIS)

Candia, R. C.; Hennies, W. T.; Azevedo, R. c.; Almeida, I.G.; Soto, J. F.

2010-01-01

Although reductions in the tax of injuries and accidents have been observed in recent years, Mining is still one of the highest risks industries. The basic causes for occurrence of fatalities can be attributed to unsafe conditions and unsafe acts. In this scene is necessary to identify safety problems and to aim the effective solutions. On the other hand, the developing countries dependence on primary industries as mining is evident. In the Peruvian economy, approximately 16% of the GNP and more than 50% of the exportations are due to the mining sector, detaching its competitive position in the worldwide mining. This paper presents fatal accidents analysis in the Peruvian mining industry, having as basis the register of occurred fatal accidents since year 2000 until 2007, identifying the main types of accidents occurred. The source of primary information is the General Mining Direction (DGM) of the Peruvian Mining and Energy Ministry (MEM). The majority of victims belongs to tertiary contractor companies that render services for mine companies. The results of the analysis show also that the majority of accidents happened in the underground mines, and that it is necessary to propose effective solutions to manage risks, aiming at reducing the fatal accidents taxes. (Author)

Romania needs a strategy for thermal energy

Directory of Open Access Journals (Sweden)

Leca Aureliu

2015-06-01

Full Text Available The energy sector in Romania consists of three sub-sectors: electricity, natural gas and heat. Among these, the sub-sector of thermal energy is in the most precarious situation because it has been neglected for a long time. This sub-sector is particularly important both due to the amount of final heat consumption (of over 50% of final energy consumption, and to the fact that it has a direct negative effect on the population, industry and services. This paper presents the main directions for developing a modern strategy of the thermal energy sub-sector, which would fit into Romania’s Energy Strategy that is still in preparation This is based on the author’s 50 years of experience in this field that includes knowledge about the processes and the equipment of thermal energy, expertise in the management and restructuring of energy companies and also knowledge of the specific legislation. It is therefore recommended, following the European regulations and practices, the promotion and upgrading of district heating systems using efficient cogeneration, using trigeneration in Romania, modernizing buildings in terms of energy use, using of renewable energy sources for heating, especially biomass, and modernizing the energy consumption of rural settlements.

Anthropotechnological analysis of industrial accidents in Brazil.

Science.gov (United States)

Binder, M. C.; de Almeida, I. M.; Monteau, M.

1999-01-01

The Brazilian Ministry of Labour has been attempting to modify the norms used to analyse industrial accidents in the country. For this purpose, in 1994 it tried to make compulsory use of the causal tree approach to accident analysis, an approach developed in France during the 1970s, without having previously determined whether it is suitable for use under the industrial safety conditions that prevail in most Brazilian firms. In addition, opposition from Brazilian employers has blocked the proposed changes to the norms. The present study employed anthropotechnology to analyse experimental application of the causal tree method to work-related accidents in industrial firms in the region of Botucatu, São Paulo. Three work-related accidents were examined in three industrial firms representative of local, national and multinational companies. On the basis of the accidents analysed in this study, the rationale for the use of the causal tree method in Brazil can be summarized for each type of firm as follows: the method is redundant if there is a predominance of the type of risk whose elimination or neutralization requires adoption of conventional industrial safety measures (firm representative of local enterprises); the method is worth while if the company's specific technical risks have already largely been eliminated (firm representative of national enterprises); and the method is particularly appropriate if the firm has a good safety record and the causes of accidents are primarily related to industrial organization and management (multinational enterprise). PMID:10680249

Determinants of job stress in chemical process industry: A factor analysis approach.

Science.gov (United States)

Menon, Balagopal G; Praveensal, C J; Madhu, G

2015-01-01

Job stress is one of the active research domains in industrial safety research. The job stress can result in accidents and health related issues in workers in chemical process industries. Hence it is important to measure the level of job stress in workers so as to mitigate the same to avoid the worker's safety related problems in the industries. The objective of this study is to determine the job stress factors in the chemical process industry in Kerala state, India. This study also aims to propose a comprehensive model and an instrument framework for measuring job stress levels in the chemical process industries in Kerala, India. The data is collected through a questionnaire survey conducted in chemical process industries in Kerala. The collected data out of 1197 surveys is subjected to principal component and confirmatory factor analysis to develop the job stress factor structure. The factor analysis revealed 8 factors that influence the job stress in process industries. It is also found that the job stress in employees is most influenced by role ambiguity and the least by work environment. The study has developed an instrument framework towards measuring job stress utilizing exploratory factor analysis and structural equation modeling.

Failure Analysis Of Industrial Boiler Pipe

International Nuclear Information System (INIS)

Natsir, Muhammad; Soedardjo, B.; Arhatari, Dewi; Andryansyah; Haryanto, Mudi; Triyadi, Ari

2000-01-01

Failure analysis of industrial boiler pipe has been done. The tested pipe material is carbon steel SA 178 Grade A refer to specification data which taken from Fertilizer Company. Steps in analysis were ; collection of background operation and material specification, visual inspection, dye penetrant test, radiography test, chemical composition test, hardness test, metallography test. From the test and analysis result, it is shown that the pipe failure caused by erosion and welding was shown porosity and incomplete penetration. The main cause of failure pipe is erosion due to cavitation, which decreases the pipe thickness. Break in pipe thickness can be done due to decreasing in pipe thickness. To anticipate this problem, the ppe will be replaced with new pipe

Reactivity-based industrial volatile organic compounds emission inventory and its implications for ozone control strategies in China

Science.gov (United States)

Liang, Xiaoming; Chen, Xiaofang; Zhang, Jiani; Shi, Tianli; Sun, Xibo; Fan, Liya; Wang, Liming; Ye, Daiqi

2017-08-01

Increasingly serious ozone (O3) pollution, along with decreasing NOx emission, is creating a big challenge in the control of volatile organic compounds (VOCs) in China. More efficient and effective measures are assuredly needed for controlling VOCs. In this study, a reactivity-based industrial VOCs emission inventory was established in China based on the concept of ozone formation potential (OFP). Key VOCs species, major VOCs sources, and dominant regions with high reactivity were identified. Our results show that the top 15 OFP-based species, including m/p-xylene, toluene, propene, o-xylene, and ethyl benzene, contribute 69% of the total OFP but only 30% of the total emission. The architectural decoration industry, oil refinery industry, storage and transport, and seven other sources constituted the top 10 OFP subsectors, together contributing a total of 85%. The provincial and spatial characteristics of OFP are generally consistent with those of mass-based inventory. The implications for O3 control strategies in China are discussed. We propose a reactivity-based national definition of VOCs and low-reactive substitution strategies, combined with evaluations of health risks. Priority should be given to the top 15 or more species with high reactivity through their major emission sources. Reactivity-based policies should be flexibly applied for O3 mitigation based on the sensitivity of O3 formation conditions.

Physio-Chemical Analysis of Industrial Effluents in parts of Edo ...

African Journals Online (AJOL)

Physio-Chemical Analysis of Industrial Effluents in parts of Edo States Nigeria. ... Journal of Applied Sciences and Environmental Management ... particularly, surface water results from all activities of man involving indiscriminate waste disposal from industry such as effluents into waterways, waste, agricultural waste, and all ...

SWOT Analysis of Industrial Development of Double-low Rapeseed in Hubei Province

OpenAIRE

Xiong, Qiu-fang; Sun, Xiu-li

2011-01-01

Based on SWOT analysis method, this paper conducts analysis on the industrial development environment of double-low rapeseed in Hubei Province from the following four aspects, in order to crystallize its resources advantage and disadvantage and make it how the opportunities and challenges that it is faced by. First, advantage analysis: excellent geographic conditions, vigorous government support, powerful scientific research force, sound industrial system support; second, disadvantage analysi...

Profitability analysis in the hospital industry.

Science.gov (United States)

Cleverley, W O

1978-01-01

Measures of marginal profit are derived for the two payment classes--cost payers and charge payers--that the hospital industry must consider in profitability analysis, i.e., prediction of the excess of revenue over expenses. Two indexes of profitability, use when payment mix is constant and when it is nonconstant, respectively, are derived from the two marginal profit measures, and one of them is shown to be a modification of the contribution margin, the conventional measure of profitability used in general industry. All three measures--the contribution margin and the two new indexes of profitability--are used to estimate changes in net income resulting from changes in patient volume with and without accompanying changes in payment mix. The conventional measure yields large overestimates of expected excess revenue. PMID:632101

Research on Technology Innovation of China's NEV Industry Based on Patent Analysis

DEFF Research Database (Denmark)

Wang, Jingyu; Liu, Yingqi; Kokko, Ari

2016-01-01

Purpose/Significance: The development of Chinas new energy vehicle(NEV) industry is concerned by both the government and enterprises. Method/Process: Based on the patent data, this paper conducts a deep analysis on the technology innovation of Chinas NEV industry from three perspectives- the year...... distribution of the patent, the distribution of the patent applicants and the distribution of patent technology area. Then, the paper makes further correlation analysis on the NEV industry chain and the patent data. Result/Conclusion: In general,the paper comprehensively reflects the whole picture of Chinas...... NEV industry technology innovation and gives some ideas for its further development....

Impact of the Smart City Industry on the Korean National Economy: Input-Output Analysis

Directory of Open Access Journals (Sweden)

Kyunam Kim

2016-07-01

Full Text Available The characteristics of the smart city industry and its effects on the national economy of Korea are investigated using input-output analysis. The definition and industrial classification of a smart city are established using the Delphi technique for experts in various fields, from information and communication technologies (ICT to governmental policies for urban matters. The results of the analysis, including the production, value added and employment induction effects, show that the smart city industry has intermediate characteristics between ICT and urban construction industries, indicating that acquisition of the competitive edge of both the ICT and construction industries is the key to the success of the smart city industry. The crucial industries related to the smart city industry are identified based on an analysis of the forward and backward linkage effects, the results of which suggest the importance of the relevant service industries. The economic effects on the national economy induced by the governmental program for smart city demonstration are estimated using input-output analysis results. Overall, the results of this study indicate that facilitation of the smart city industry plays a key role not only in the sustainable city, but also in the growth of the national economy.

Energy demand futures by global models : Projections of a complex system

NARCIS (Netherlands)

Edelenbosch, O.Y.

2018-01-01

The energy demand sectors industry, transport and buildings are together directly responsible for around 51 % of the global energy-related CO2 emissions and indirectly drive the emissions in the energy supply sectors. The demand sectors are characterized by many subsectors, technologies,

Risk evaluation on leading companies in property and real estate subsector at IDX: A Value-at-Risk with ARMAX-GARCHX approach and duration test

Science.gov (United States)

Dwi Prastyo, Dedy; Handayani, Dwi; Fam, Soo-Fen; Puteri Rahayu, Santi; Suhartono; Luh Putu Satyaning Pradnya Paramita, Ni

2018-03-01

Risk assessment and evaluation becomes essential for financial institution to measure the potential risk of their counterparties. In middle of 2016 until first quarter of 2017, there is national program from Indonesian government so-called Tax Amnesty. One subsector that has potential to receive positive impact from the Tax Amnesty program is property and real estate. This work evaluates the risk of top five companies in term of capital share listed in Indonesia stock exchange (IDX). To do this, the Value-at-Risk (VaR) with ARMAX-GARCHX approach is employed. The ARMAX-GARCHX simultaneously models the adaptive mean and variance of stock return of each company considering exogenous variables, i.e. IDR/USD exchange rate and Jakarta Composite Index (JCI). The risk is evaluated in scheme of time moving window. The risk evaluation using 5% quantile with window size 500 transaction days perform better result compare to other scenarios. In addition, duration test is used to test the dependency between shortfalls. It informs that series of shortfall are independent.

Manufacturing sector carbon dioxide emissions in nine OECD countries 1973--87: A Divisia index decomposition to changes in fuel mix, emission coefficients, industry structure, energy intensities, and international structure

International Nuclear Information System (INIS)

Torvanger, A.

1990-11-01

In this paper the reduction in energy-related manufacturing carbon dioxide emissions for nine OECD countries in the period 1973 to 1987 is analyzed. Carbon dioxide emissions are estimated from energy use data. The emphasis is on carbon dioxide intensities, defined as emissions divided by value added. The overall manufacturing carbon dioxide intensity for the nine OECD countries was reduced by 42% in the period 1973--1987. Five fuels are specified together with six subsectors of manufacturing. Carbon dioxide emissions are estimated from fossil fuel consumption, employing emissions coefficients for gas, oil and solids. In addition, electricity consumption is specified. For electricity use an emission coefficient index is calculated from the shares of fossil fuels, nuclear power and hydro power used to generate electricity, and the efficiency in electricity generation from these energy sources. A Divisia index approach is used to sort out the contribution to reduced carbon dioxide intensity from different components. The major finding is that the main contribution to reduced carbon dioxide intensity is from the general reduction in manufacturing energy intensity, most likely driven by economic growth and increased energy prices, giving incentives to invest in new technology and new industrial processes. There is also a significant contribution from reduced production in the most carbon dioxide intensive subsectors, and a contribution from higher efficiency in electricity generation together with a larger nuclear power share at the expense of oil. 19 refs., 5 figs., 11 tabs

MODEL OF ANALYSIS IN THE ROMANIAN FOOTWEAR INDUSTRY

Directory of Open Access Journals (Sweden)

Dimi OFILEANU

2014-06-01

Full Text Available The aim of this work is to determine the influence that exports of footwear industry have on the turnover of the sector. In the work, a period of 9 years is taken into consideration: from 2004 to 2012, establishing an econometric model of analysis of the connection between the turnover and direct exports of footwear industry in Romania. Based on the analyzed empirical data, the work answers to the following question: what is the influence that exports of footwear industry have on sector’s turnover? In addition to specifying the econometric model which describes the connection between the two variables, we also test the validity of the model and the intensity of the connection between the two variables.

System analysis of industrial waste management: A case study of industrial plants located between Tehran and Karaj

Directory of Open Access Journals (Sweden)

Mohammad Amin Karami

2015-01-01

Full Text Available Aims: In this study, management of industrial waste in industries located between Tehran and Karaj in 2009-2010 was examined. Materials and Methods: This is a cross-sectional study which was done by site survey (Iranian environmental protection organization questionnaire usage and results analysis. This questionnaire was consisted of 45 questions about industrial waste, quantity, quality, and management. A total number of industries with over 50 employees was 283, and Stratified sampling method was used. Sample of size 50 was selected from 283cases. Results: The major hazardous waste-generating industries include chemical and plastic. Private sectors disposed 45% of generated waste. Majority of wastes were buried (62%, and only 17% of industrial waste was recycled. Conclusion: For hazardous waste reduction in this zone and health and economic attractions, the opportunity for reuse and recovery for these wastes must maximize in short-term and burial of industrial waste must be minimized. Industries such as chemical-plastic and electronics which have higher hazardous waste, in long-term, must be replaced with other industries such as wood cellulose and paper that have lower hazardous waste production rate.

On-line and bulk analysis for the resource industries

International Nuclear Information System (INIS)

Lim, C.S.; Sowerby, B.D.; Tickner, J.R.; Madsen, I.C.

2001-01-01

Nuclear techniques are the basis of many CSIRO on-line and bulk analysis systems that are now widely used in the mineral and energy industries. The continuous analysis and rapid response of these systems have led to improved control of mining, processing and blending operations. This paper reviews recent developments in neutron, gamma-ray and X-ray techniques for on-line and bulk analysis by CSIRO Minerals including neutron techniques for the on-conveyor belt determination of the composition of cement raw meal, the on-line analysis of composition in pyrometallurgical applications, the on-conveyor belt determination of ash in coal, and the rapid and accurate determination of gold in bulk laboratory samples. The paper also discusses a new gamma-ray technique for the on-line determination of ash in coal and the application of X-ray diffraction techniques for the on-line determination of mineralogy in the cement industry

Management of Industrial Performance Indicators: Regression Analysis and Simulation

Directory of Open Access Journals (Sweden)

Walter Roberto Hernandez Vergara

2017-11-01

Full Text Available Stochastic methods can be used in problem solving and explanation of natural phenomena through the application of statistical procedures. The article aims to associate the regression analysis and systems simulation, in order to facilitate the practical understanding of data analysis. The algorithms were developed in Microsoft Office Excel software, using statistical techniques such as regression theory, ANOVA and Cholesky Factorization, which made it possible to create models of single and multiple systems with up to five independent variables. For the analysis of these models, the Monte Carlo simulation and analysis of industrial performance indicators were used, resulting in numerical indices that aim to improve the goals’ management for compliance indicators, by identifying systems’ instability, correlation and anomalies. The analytical models presented in the survey indicated satisfactory results with numerous possibilities for industrial and academic applications, as well as the potential for deployment in new analytical techniques.

Economic potentials of CHP connected to district heat systems in Germany. Implementation of the EU Efficiency Directive; Wirtschaftliche Potenziale der waermeleitungsgebundenen Siedlungs-KWK in Deutschland. Umsetzung der EU-Energieeffizienzrichtlinie

Energy Technology Data Exchange (ETDEWEB)

Eikmeier, Bernd [Fraunhofer-Institut fuer Fertigungstechnik und Angewandte Materialforschung IFAM, Bremen (Germany). Organisationseinheit Systemanalyse; Bremen Univ. (Germany)

2015-07-01

The EU Efficiency Directive (2012/27/EU) is requiring all member states to carry out an evaluation of the potential for highly efficient CHP and the efficient use of district heating and cooling by December 2015. The German Federal Ministry of Economic Affairs and Energy appointed this task to the Fraunhofer Institute for Manufacturing and Advanced Materials, division for Energy Systems Analysis (formerly Bremer Energie Institut) in conjunction with other partners. The results for the sector district- and communal heating with CHP, sub-sectors private households, trade and services industry, are presented in this article.

Economic potentials of CHP connected to district heat systems in Germany. Implementation of the EU Efficiency Directive

International Nuclear Information System (INIS)

Eikmeier, Bernd

2015-01-01

The EU Efficiency Directive (2012/27/EU) is requiring all member states to carry out an evaluation of the potential for highly efficient CHP and the efficient use of district heating and cooling by December 2015. The German Federal Ministry of Economic Affairs and Energy appointed this task to the Fraunhofer Institute for Manufacturing and Advanced Materials, division for Energy Systems Analysis (formerly Bremer Energie Institut) in conjunction with other partners. The results for the sector district- and communal heating with CHP, sub-sectors private households, trade and services industry, are presented in this article.

Total quality management analysis in printing industry | Ching ...

African Journals Online (AJOL)

Total quality management analysis in printing industry. ... Journal of Fundamental and Applied Sciences ... The organization is suggested to implement Total Quality Management (TQM) in order to improve the quality of the products and hence ...

An Industry Analysis of the MBA Market and the Competitive Positioning of the GSBPP

National Research Council Canada - National Science Library

Hager, Garrett W; King, Thomas T

2007-01-01

The purpose of this Master of Eusiness Administration (MBA) project is to perform an industry analysis of the MBA market utilizing the principles of industry analysis noted in Michael Porter's "Five Forces Analysis" model...

Gap analysis of industrial energy management systems in Slovenia

International Nuclear Information System (INIS)

Pusnik, Matevz; Al-Mansour, Fouad; Sucic, Boris; Gubina, A.F.

2016-01-01

Industrial energy management systems, which comprise software solutions, upfront services, and ongoing monitoring and management, enable industrial companies to actively manage their energy consumption and energy procurement activities. Energy management systems are usually tailored to the specific industrial needs but may offer limited functionalities, mostly as a result of different identified gaps (process simplifications, improper measurement points, a lack of motivation, etc.). A survey was conducted in order to analyse the gaps and use of energy management systems in Slovenian industry. The results of the survey presented in this paper demonstrate that the use of energy management systems in industry is recognised as a potential competitive advantage by most of the addressed companies. Furthermore, motivation was highlighted as an important prerequisite for process and structural improvements and reported to be thus far insufficiently addressed. Furthermore, the importance of strong cooperation with actors at different levels of industry, namely the executive and shop floor levels, is addressed. In the conclusion, possibilities for new opportunities in the exploitation of energy efficiency through the use of industrial energy management systems are discussed. - Highlights: • Investigating gaps and evaluation of EMS use in Slovenian industry. • Analysis based on the developed self-assessment tool 3EMT. • Existing EMS do not include all the requirements for the industrial operations. • Constructive cooperation between all stakeholders is of crucial importance.

INMETRO products analysis program: impact on quality of the brazilian industry

Directory of Open Access Journals (Sweden)

Marcos André Borges

2008-07-01

Full Text Available The main objective is to proceed a detailed analysis of the Products Analysis Program of Inmetro, evaluating its contribution to the suppliers of products and services. The relevance of this program - a governmental initiative financed with public resources that relates several sectors of the society – as a factor of incentive to the competitiveness of the national industry, can be evidenced by the research of the impact generated by this activity, translated in improvement actions to the analyzed products and services that aim at the correction of eventual non-conformity to the criteria set in standards and technical regulations related to health and safety. Several sectors in industry have been benefited with the creation or revision of standards, implementation of industry quality programs, voluntary or mandatory conformity assessment programs, and others. The consequences include, beyond the protection of the consumers, the increase of national industry competitiveness and domestic market strength, and the warranty of loyal competition between the suppliers. Key-words: Product Analysis, Quality, Inmetro.

Social cost benefit analysis of sustainable industrial areas

International Nuclear Information System (INIS)

Blom, M.J.; Schroten, A.

2010-05-01

In restructuring a industrial park many different interests are involved, such as space, business climate, environmental quality or landscape. The social cost-benefit analysis (SCBA) is a tool for mapping all current and future pros and cons (expressed in Euros) of a restructuring project for society as a whole as objective as possible. The SCBA manual for sustainable industrial parks describes how an SCBA can be performed and how the results could accommodate decisions made. SCBA pilots have been carried out for restructuring projects in four Dutch municipalities: Katwijk, Rijnwoude, Hardinxveld-Giessendam and Westland. [nl

On the singlet projector and the monodromy relation for psu(2,2|4) spin chains and reduction to subsectors

International Nuclear Information System (INIS)

Kazama, Yoichi; Komatsu, Shota; Nishimura, Takuya

2015-01-01

As a step toward uncovering the relation between the weak and the strong coupling regimes of the N=4 super Yang-Mills theory beyond the spectral level, we have developed in a previous paper [arXiv:1410.8533] a novel group theoretic interpretation of the Wick contraction of the fields, which allowed us to compute a much more general class of three-point functions in the SU(2) sector, as in the case of strong coupling [arXiv:1312.3727], directly in terms of the determinant representation of the partial domain wall partition function. Furthermore, we derived a non-trivial identity for the three point functions with monodromy operators inserted, being the discrete counterpart of the global monodromy condition which played such a crucial role in the computation at strong coupling. In this companion paper, we shall extend our study to the entire psu(2,2|4) sector and obtain several important generalizations. They include in particular (i) the manifestly conformally covariant construction, from the basic principle, of the singlet-projection operator for performing the Wick contraction and (ii) the derivation of the monodromy relation for the case of the so-called “harmonic R-matrix”, as well as for the usual fundamental R-matrtix. The former case, which is new and has features rather different from the latter, is expected to have important applications. We also describe how the form of the monodromy relation is modified as psu(2,2|4) is reduced to its subsectors.

Applications of neutron activation analysis in industry

International Nuclear Information System (INIS)

Zaini Hamzah.

1985-01-01

Neutron activation analysis technique is discussed in brief. This technique is used for quality control of raw materials, process materials and finished products, as well as activities in research and development for the improvement of the products and new products. The uses of this technique in several experienced industries are mentioned (author)

Analysis of Petroleum Downstream Industry Potential in Riau Province

Directory of Open Access Journals (Sweden)

Tomi Erfando

2017-06-01

Full Text Available Petroleum downstream industry in Riau Province is still not optimal. The data shows that from 98,892,755 barrels lifting oil each year only 62,050,000 barrels could be processed in refinery unit II Dumai operated by PT Pertamina. There is a potential of 35-40% of downstream industry. Indonesian Government through The Ministry of Energy and Mineral Resources declared the construction of a mini refinery to boost oil processing output in the downstream sector. A feasibility study of development plan mini refinery is needed. The study includes production capacity analysis, product analysis, development & operational refinery  analysis and economic analysis. The results obtained by the mini refinery capacity is planned to process crude oil 6000 BOPD with the products produced are gasoline, kerosene, diesel and oil. Investment cost consist of is capital cost US $ 104419784 and operating cost US $ 13766734 each year with net profit earned US $ 12330063/year and rate of return from investment 11.63%

Statistical, ecosystems and competitiveness analysis of the media and content industries : The Music Industry

NARCIS (Netherlands)

Simon, J.P.; Leurdijk, A.G.D.; Nieuwenhuis, O.A.

2012-01-01

This report offers an in-depth analysis of the major economic developments in the music industry. It looks at music companies, and covers the production and distribution of recorded music, including online distribution, and the competition which these companies face from other online music

An analysis of the Dutch service sector. Energy consumption and trends

International Nuclear Information System (INIS)

Ramirez, A.; Patel, M.; Blok, K.

2002-09-01

Energy efficiency and its implications for a decrease in carbon dioxide emissions have been a main force behind the current debate on energy issues. Until now, the attention of policy-makers and scientists has been mainly focused on the industrial and residential sectors, although the transport sector has gained relevance in the fast few years. The service sector, on the other hand, has remained at the bottom of the priority list. The main goal of this paper is to explore patterns of energy consumption and energy intensity in the Dutch service sector in the last 15 years. This paper is divided into two parts. The first part deals with developments for the whole sector, including a decomposition analysis, and the second part analyses sectoral developments for five sub-sectors: Wholesale and retail trade, hotels and restaurants; Financial institutes; Real estate renting and business activities; Education and Hospitals. At the aggregate level we have found a strong increase in energy consumption, especially in electricity. Furthermore, we found no evidence of significant decrease in energy intensity in the last decade. Furthermore, the decomposition analysis showed that (a) the activity effect (value added) has been the main driving force behind the increase of energy consumption of the service sector, (b) an increase in labour intensity has also boosted energy consumption and (c) energy intensity (in terms of energy per employee) did not have a significant role on decreasing energy use. At the subsectoral level the picture is blurred, especially due to the lack of good quality data. With exception of the sector Real estate renting and business activities which showed a decrease in energy intensity of about 20% between 1993 and 1999, the decrease in energy intensity is quite low. Hence, the results point towards a failure of actual energy policies to address the service sector. This is in contrast to the fact that, due to the high share of electricity consumption and

Greenhouse gas options, policy and measures for the Canadian Transportation Equipment Manufacturing Industry - Final report

International Nuclear Information System (INIS)

2000-02-01

This report summarizes and analyses the work that have been carried out by the Transportation Equipment Manufacturing Sector (TEMS) Working Group of the National Climate Change Industry Table over the last 14 months, and presents the Group's view of appropriate policies for greenhouse gas emission reduction in Canada. To develop its approach, the Working Group conducted five separate studies which are included in this report as annexes. Annex A is a Foundation Paper, which provides an overview of the sector's performance vis-a-vis energy use and greenhouse gas production. Annex B analyzes the competitive position of the industry by reviewing growth trends in each of the industry sub-sectors and the key factors in maintaining and enhancing the sector's international competitive position. Annex C is a technology assessment. It provides an overview of the uptake of energy saving technology in the sector. Annex D provides a facility level analysis focusing on energy use in the automotive parts manufacturing sector. Annex E is a review of American policies on climate change, summarizing the approach currently being taken towards greenhouse gas emission reduction in the United States. Some of the key findings of this report are: (1) business-as-usual emissions will greatly exceed the implicit Kyoto target of six per cent reduction from 1990 levels, (2) relatively few opportunities exist for major emissions reductions through the use of existing technology, (3) sector-specific policies appear to be ill-advised, but cross-cutting policies provide good opportunities for the transportation equipment manufacturing sector to do its part in helping Canada meeting its Kyoto commitment. The report recommends investigation of barriers to adoption of new technologies and examination of market imperfections, promotion of cogeneration where it makes economic sense, and consideration of the use of flexible instruments such as carbon taxes and tradable emission permits. Overall, the

Cerveza tropical: de pequeño negocio familiar a empresa multinacional 1924-1993

Directory of Open Access Journals (Sweden)

Santiago de Luxán Meléndez

2013-11-01

Full Text Available En este artículo se enuncia, a grandes rasgos, la evolución de una empresa industrial del subsector bebidas, en Canarias (7924-1993, primando los aspectos relacionados con las estrategias comerciales.This article discurses, from a general point of view, the evolution of an industrial brewing firm in the Canary Islands, making special considerations on its commercial srategic plans.

VHTR Construction Ripple Effect using Inter-Industry Analysis

International Nuclear Information System (INIS)

Lee, T. H.; Lee, K. Y.; Shin, Y. J.

2015-01-01

As a part of a VHTR economic analysis, we have studied the VHTR construction cost and operation and maintenance cost. However, it is somewhat difficult to expect the exact cost due to insufficient reference data and experience. As a result, we propose quantitative analysis techniques for ripple effects such as the production inducement effect, added value inducement effect, and employment inducement effect for VHTR 600MWt x 4 module construction and operation ripple effect based on NOAK. This paper presents a new method for the ripple effect and preliminary ripple effect consequence. We proposed a ripple effect analysis method using a time series and inter-industry table. As a result, we can predict that a 600MWth x 4 module VHTR reactor construction will bring about a 43771 employment effect, 24160 billion KRW production effect, and 4472 billion added value effect for 22 years. It is necessary to use the sub-account values of an inter-industry table to obtain a more precise effect result. However, the methodology can be applied with minor modification to another reactor type.

VHTR Construction Ripple Effect using Inter-Industry Analysis

Energy Technology Data Exchange (ETDEWEB)

Lee, T. H.; Lee, K. Y.; Shin, Y. J. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2015-10-15

As a part of a VHTR economic analysis, we have studied the VHTR construction cost and operation and maintenance cost. However, it is somewhat difficult to expect the exact cost due to insufficient reference data and experience. As a result, we propose quantitative analysis techniques for ripple effects such as the production inducement effect, added value inducement effect, and employment inducement effect for VHTR 600MWt x 4 module construction and operation ripple effect based on NOAK. This paper presents a new method for the ripple effect and preliminary ripple effect consequence. We proposed a ripple effect analysis method using a time series and inter-industry table. As a result, we can predict that a 600MWth x 4 module VHTR reactor construction will bring about a 43771 employment effect, 24160 billion KRW production effect, and 4472 billion added value effect for 22 years. It is necessary to use the sub-account values of an inter-industry table to obtain a more precise effect result. However, the methodology can be applied with minor modification to another reactor type.

Managing Security Risks in an Industrial Investment – Analysis Directions

Directory of Open Access Journals (Sweden)

Stefan Dragomir

2016-05-01

Full Text Available This paper achieved an analysis of some important management strategies for an investment, in correlation with index of global pollution. Environmental security assessment shall be determined taking into account the workplace security and effects on health, safety of workers in an industry investment. It is necessary to observe and collect a larger number of data generated by the development of an industrial process, so as to make a deep analysis on global pollution index and how it is affected industrial investment environment. This research shows how can the substances that infest the environment to produce much damage and influence the environmental factors (air, water, soil, landscape, fauna and flora. When we know the risks that characterize the plant equipment, we can protect the life and we can protect the environment for a sustainable development in the future.

Selected industrial and environmental applications of neutron activation analysis

International Nuclear Information System (INIS)

Kucera, J.

1999-01-01

A review of the applications of Instrumental Neutron Activation Analysis (INAA) in the industrial and environmental fields is given. Detection limits for different applications are also given. (author)

The Italian Footwear Industry: an Empirical Analysis

OpenAIRE

Pirolo, Luca; Giustiniano, Luca; Nenni, Maria Elena

2013-01-01

This paper aims to provide readers with a deep empirical analysis on the Italian footwear industry in order to investigate the evolution of its structure (trends in sales and production, number of firms and employees, main markets, etc.), together with the identification of the main drivers of competitiveness in order to explain the strategies implemented by local actors.

The European Insurance Industry: A PEST Analysis

Directory of Open Access Journals (Sweden)

Charmaine Barbara

2017-05-01

Full Text Available The insurance industry plays an important role for European economic stability and the threats and opportunities it faces should be carefully determined. In this paper we highlight the main challenges by using a Political, Economic, Social and Technological (PEST analysis. This work applies conventional actuarial thought on this area by focusing strictly on the European sector.

Policies and Measures to Realise Industrial Energy Efficiency and Mitigate Climate Change

International Nuclear Information System (INIS)

Price, L.K.; McKane, A.T.; Ploutakhina, M.; Monga, P.; Gielen, D.; Bazilian, M.; Nussbaumer, P.; Howells, M.; Rogner, H.-H.

2009-01-01

The industrial sector is responsible for a significant share of global energy use and carbon dioxide (CO 2 ) emissions. Energy efficiency is commonly seen as the most cost-effective, least-polluting, and most readily-accessible industrial energy saving option available in the industrial sector worldwide. Capturing the full extent of these potential end-use energy efficiency improvements rapidly is essential if the world is to be on a path to stabilise greenhouse gas (GHG) concentrations to a level that would prevent dangerous anthropogenic interference with the climate system. In the International Energy Agency (IEA) 450 parts per million stabilisation scenario, over a quarter of all energy efficiency gains need to come from the industrial sector by 2050, largely by changing the pattern of industrial energy use. The reduction potential estimated by IEA and the Intergovernmental Panel on Climate Change (IPCC) for five energy-intensive industrial sub-sectors ranges from about 10 to 40 per cent, depending upon the sector. There is significant potential to reduce, at low or no cost, the amount of energy used to manufacture most commodities. Many policies and programmes - at a national level - have already demonstrated significant improvements in industrial energy efficiency. The associate reduction in energy needs often also improves economic competitiveness as well as mitigates GHG emissions. However, at an international level, approaches such as the Clean Development Mechanism (CDM) are not yet delivering the expected energy efficiency improvements. Existing and effective industrial energy efficiency policies and measures could be replicated at a global level. Key elements of those policies and measures include increasing facility management attention to the issue of energy efficiency; promoting the dissemination of information, practice, and tools; increasing the auditing and implementation capacity; and developing the market for industrial energy efficiency

Influencing Factors of Catering and Food Service Industry Based on Principal Component Analysis

OpenAIRE

Zi Tang

2014-01-01

Scientific analysis of influencing factors is of great importance for the healthy development of catering and food service industry. This study attempts to present a set of critical indicators for evaluating the contribution of influencing factors to catering and food service industry in the particular context of Harbin City, Northeast China. Ten indicators that correlate closely with catering and food service industry were identified and performed by the principal component analysis method u...

Analysis of Risk Optimization on the Industrial Area Around

International Nuclear Information System (INIS)

Sony, DT; Demon-Handoyo

2000-01-01

Indonesia as an industrial country, there are large industrial area whichis directly or indirectly have an effect to human health by routine dischargeof waste from industrial installations. So, the criteria limit must bedetermined to regulate industrial area. The PRA method (Probabilistic RiskAssessment) is used in the nuclear technology especially reactor safetytechnology could be applied to accommodate those problems. The principles ofPRA method is to determine probability and consequences for accident ofindustrial plant or transportation of product. The analysis procedureincludes classification of industry activity type and inventories, estimationof external consequences, estimation of probability for installation andtransportation accident, determination of social risk and prioritization ofrisks. Calculation of consequence is based on the lost of life which isaffected by fire, toxic and explosive. The calculation for one industrialarea simple model as case study was done. From the calculation result, theconsequences value of 0 - 25 persons/event; 26 - 50 persons/event; 51 - 75persons/event, 625 - 650 persons/event and the event probability value of1.10 -2 to 3.10 -8 are obtained. The optimization value of industrial areaaround can be determined by using combination of probability value andconsequences value. (author)

Efficiency analysis of wood processing industry in China during 2006-2015

Science.gov (United States)

Zhang, Kun; Yuan, Baolong; Li, Yanxuan

2018-03-01

The wood processing industry is an important industry which affects the national economy and social development. The data envelopment analysis model (DEA) is a quantitative evaluation method for studying industrial efficiency. In this paper, the wood processing industry of 8 provinces in southern China is taken as the study object, and the efficiency of each province in 2006 to 2015 was measured and calculated with the DEA method, and the efficiency changes, technological changes and Malmquist index were analyzed dynamically. The empirical results show that there is a widening gap in the efficiency of wood processing industry of the 8 provinces, and the technological progress has shown a lag in the promotion of wood processing industry. According to the research conclusion, along with the situation of domestic and foreign wood processing industry development, the government must introduce relevant policies to strengthen the construction of the wood processing industry technology innovation policy system and the industrial coordinated development system.

The approach to risk analysis in three industries: nuclear power, space systems, and chemical process

International Nuclear Information System (INIS)

Garrick, B.J.

1988-01-01

The aerospace, nuclear power, and chemical processing industries are providing much of the incentive for the development and application of advanced risk analysis techniques to engineered systems. Risk analysis must answer three basic questions: What can go wrong? How likely is it? and What are the consequences? The result of such analyses is not only a quantitative answer to the question of 'What is the risk', but, more importantly, a framework for intelligent and visible risk management. Because of the societal importance of the subject industries and the amount of risk analysis activity involved in each, it is interesting to look for commonalities, differences, and, hopefully, a basis for some standardization. Each industry has its strengths: the solid experience base of the chemical industry, the extensive qualification and testing procedures of the space industry, and the integrative and quantitative risk and reliability methodologies developed for the nuclear power industry. In particular, most advances in data handling, systems interaction modeling, and uncertainty analysis have come from the probabilistic risk assessment work in the nuclear safety field. In the final analysis, all three industries would greatly benefit from a more deliberate technology exchange program in the rapidly evolving discipline of quantitative risk analysis. (author)

Multi criteria analysis in the renewable energy industry

CERN Document Server

San Cristóbal Mateo, José Ramón

2012-01-01

Decision makers in the Renewable Energy sector face an increasingly complex social, economic, technological, and environmental scenario in their decision process. Different groups of decision-makers become involved in the process, each group bringing along different criteria therefore, policy formulation for fossil fuel substitution by Renewable Energies must be addressed in a multi-criteria context. Multi Criteria Analysis in the Renewable Energy Industry is a direct response to the increasing interest in the Renewable Energy industry which can be seen as an important remedy to many environmental problems that the world faces today. The multiplicity of criteria and the increasingly complex social, economic, technological, and environmental scenario makes multi-criteria analysis a valuable tool in the decision-making process for fossil fuel substitution. The detailed chapters explore the use of the Multi-criteria decision-making methods and how they provide valuable assistance in reaching equitable and accept...

Kinerja Portofolio Saham pada Perusahaan Makanan, Property dan Pertambangan di Bursa Efek Indonesia

Directory of Open Access Journals (Sweden)

Nasri Zarman

2017-06-01

Full Text Available The Stock Portfolios' Performance of Food, Property, and Mining IndustryThis research aimed to analyze the Portfolio's performance of food industry, property, and mining. There are three parameters, namely: Sharpe Performance, Traynor Performance, and Jensen Performance. The three performance measurements assume that there is a linear connection between the return portfolios with the return of some market index. During the period, 2009 to 2013, and the mining and gas sub-sector are more productive than the other sub-sectors. The mining sector is better than the Property Sector and the Food Sector. Then based on the method of Jensen ALPHA it showed the highest performance group of mining stocks, in proportion to the risk which is also very high. The study suggests that the existing has to be maintained and further improved so that the mission to develop sources of potential energy into a profitable investment portfolio can sustain.DOI: 10.15408/ess.v7i2.5354

Economic analysis of waste-to-energy industry in China.

Science.gov (United States)

Zhao, Xin-Gang; Jiang, Gui-Wu; Li, Ang; Wang, Ling

2016-02-01

The generation of municipal solid waste is further increasing in China with urbanization and improvement of living standards. The "12th five-year plan" period (2011-2015) promotes waste-to-energy technologies for the harmless disposal and recycling of municipal solid waste. Waste-to-energy plant plays an important role for reaching China's energy conservation and emission reduction targets. Industrial policies and market prospect of waste-to-energy industry are described. Technology, cost and benefit of waste-to-energy plant are also discussed. Based on an economic analysis of a waste-to-energy project in China (Return on Investment, Net Present Value, Internal Rate of Return, and Sensitivity Analysis) the paper makes the conclusions. Copyright © 2015 Elsevier Ltd. All rights reserved.

Developing engineering design core competences through analysis of industrial products

DEFF Research Database (Denmark)

Hansen, Claus Thorp; Lenau, Torben Anker

2011-01-01

Most product development work carried out in industrial practice is characterised by being incremental, i.e. the industrial company has had a product in production and on the market for some time, and now time has come to design a new and upgraded variant. This type of redesign project requires...... that the engineering designers have core design competences to carry through an analysis of the existing product encompassing both a user-oriented side and a technical side, as well as to synthesise solution proposals for the new and upgraded product. The authors of this paper see an educational challenge in staging...... a course module, in which students develop knowledge, understanding and skills, which will prepare them for being able to participate in and contribute to redesign projects in industrial practice. In the course module Product Analysis and Redesign that has run for 8 years we have developed and refined...

A model for improving energy efficiency in industrial motor system using multicriteria analysis

International Nuclear Information System (INIS)

Herrero Sola, Antonio Vanderley; Mota, Caroline Maria de Miranda; Kovaleski, Joao Luiz

2011-01-01

In the last years, several policies have been proposed by governments and global institutions in order to improve the efficient use of energy in industries worldwide. However, projects in industrial motor systems require new approach, mainly in decision making area, considering the organizational barriers for energy efficiency. Despite the wide application, multicriteria methods remain unexplored in industrial motor systems until now. This paper proposes a multicriteria model using the PROMETHEE II method, with the aim of ranking alternatives for induction motors replacement. A comparative analysis of the model, applied to a Brazilian industry, has shown that multicriteria analysis presents better performance on energy saving as well as return on investments than single criterion. The paper strongly recommends the dissemination of multicriteria decision aiding as a policy to support the decision makers in industries and to improve energy efficiency in electric motor systems. - Highlights: → Lack of decision model in industrial motor system is the main motivation of the research. → A multicriteria model based on PROMETHEE method is proposed with the aim of supporting the decision makers in industries. → The model can contribute to transpose some barriers within the industries, improving the energy efficiency in industrial motor system.

A model for improving energy efficiency in industrial motor system using multicriteria analysis

Energy Technology Data Exchange (ETDEWEB)

Herrero Sola, Antonio Vanderley, E-mail: sola@utfpr.edu.br [Federal University of Technology, Parana, Brazil (UTFPR)-Campus Ponta Grossa, Av. Monteiro Lobato, Km 4, CEP: 84016-210 (Brazil); Mota, Caroline Maria de Miranda, E-mail: carolmm@ufpe.br [Federal University of Pernambuco, Cx. Postal 7462, CEP 50630-970, Recife (Brazil); Kovaleski, Joao Luiz [Federal University of Technology, Parana, Brazil (UTFPR)-Campus Ponta Grossa, Av. Monteiro Lobato, Km 4, CEP: 84016-210 (Brazil)

2011-06-15

In the last years, several policies have been proposed by governments and global institutions in order to improve the efficient use of energy in industries worldwide. However, projects in industrial motor systems require new approach, mainly in decision making area, considering the organizational barriers for energy efficiency. Despite the wide application, multicriteria methods remain unexplored in industrial motor systems until now. This paper proposes a multicriteria model using the PROMETHEE II method, with the aim of ranking alternatives for induction motors replacement. A comparative analysis of the model, applied to a Brazilian industry, has shown that multicriteria analysis presents better performance on energy saving as well as return on investments than single criterion. The paper strongly recommends the dissemination of multicriteria decision aiding as a policy to support the decision makers in industries and to improve energy efficiency in electric motor systems. - Highlights: > Lack of decision model in industrial motor system is the main motivation of the research. > A multicriteria model based on PROMETHEE method is proposed with the aim of supporting the decision makers in industries. > The model can contribute to transpose some barriers within the industries, improving the energy efficiency in industrial motor system.

Integrable subsectors from holography

Science.gov (United States)

de Mello Koch, Robert; Kim, Minkyoo; Van Zyl, Hendrik J. R.

2018-05-01

We consider operators in N=4 super Yang-Mills theory dual to closed string states propagating on a class of LLM geometries. The LLM geometries we consider are specified by a boundary condition that is a set of black rings on the LLM plane. When projected to the LLM plane, the closed strings are polygons with all corners lying on the outer edge of a single ring. The large N limit of correlators of these operators receives contributions from non-planar diagrams even for the leading large N dynamics. Our interest in these fluctuations is because a previous weak coupling analysis argues that the net effect of summing the huge set of non-planar diagrams, is a simple rescaling of the 't Hooft coupling. We carry out some nontrivial checks of this proposal. Using the su(2|2)2 symmetry we determine the two magnon S-matrix and demonstrate that it agrees, up to two loops, with a weak coupling computation performed in the CFT. We also compute the first finite size corrections to both the magnon and the dyonic magnon by constructing solutions to the Nambu-Goto action that carry finite angular momentum. These finite size computations constitute a strong coupling confirmation of the proposal.

Exergy analysis on industrial boiler energy conservation and emission evaluation applications

Science.gov (United States)

Li, Henan

2017-06-01

Industrial boiler is one of the most energy-consuming equipments in china, the annual consumption of energy accounts for about one-third of the national energy consumption. Industrial boilers in service at present have several severe problems such as small capacity, low efficiency, high energy consumption and causing severe pollution on environment. In recent years, our country in the big scope, long time serious fog weather, with coal-fired industrial boilers is closely related to the regional characteristics of high strength and low emissions [1]. The energy-efficient and emission-reducing of industry boiler is of great significance to improve China’s energy usage efficiency and environmental protection. Difference in thermal equilibrium theory is widely used in boiler design, exergy analysis method is established on the basis of the first law and second law of thermodynamics, by studying the cycle of the effect of energy conversion and utilization, to analyze its influencing factors, to reveal the exergy loss of location, distribution and size, find out the weak links, and a method of mining system of the boiler energy saving potential. Exergy analysis method is used for layer combustion boiler efficiency and pollutant emission characteristics analysis and evaluation, and can more objectively and accurately the energy conserving potential of the mining system of the boiler, find out the weak link of energy consumption, and improve equipment performance to improve the industrial boiler environmental friendliness.

Download this PDF file

African Journals Online (AJOL)

crop sub-sector of the economy with focus on oil palm industry. Data used for this study were generated ... recommended (Agboola 1979, Papadakis 1966, NIFOR 1980). But the optimum yield of tenera is ... the z-score statistic was used. Other simple statistical techniques used include means, percentages, frequencies.

Statistical, ecosystems and competitiveness analysis of the media and content industries : The Newspaper Publishing Industry

NARCIS (Netherlands)

Simon, J.P.; Leurdijk, A.G.D.; Slot, M.; Nieuwenhuis, O.A.

2012-01-01

This report offers an in-depth analysis of the major economic developments in the music industry. It looks at music companies, and covers the production and distribution of recorded music, including online distribution, and the competition which these companies face from other online music

Two Essays in Financial Economics

Science.gov (United States)

Putnam, Kyle J.

The following dissertation contains two distinct empirical essays which contribute to the overall field of Financial Economics. Chapter 1, entitled "The Determinants of Dynamic Dependence: An Analysis of Commodity Futures and Equity Markets," examines the determinants of the dynamic equity-commodity return correlations between five commodity futures sub-sectors (energy, foods and fibers, grains and oilseeds, livestock, and precious metals) and a value-weighted equity market index (S&P 500). The study utilizes the traditional DCC model, as well as three time-varying copulas: (i) the normal copula, (ii) the student's t copula, and (iii) the rotated-gumbel copula as dependence measures. Subsequently, the determinants of these various dependence measures are explored by analyzing several macroeconomic, financial, and speculation variables over different sample periods. Results indicate that the dynamic equity-commodity correlations for the energy, grains and oilseeds, precious metals, and to a lesser extent the foods and fibers, sub-sectors have become increasingly explainable by broad macroeconomic and financial market indicators, particularly after May 2003. Furthermore, these variables exhibit heterogeneous effects in terms of both magnitude and sign on each sub-sectors' equity-commodity correlation structure. Interestingly, the effects of increased financial market speculation are found to be extremely varied among the five sub-sectors. These results have important implications for portfolio selection, price formation, and risk management. Chapter 2, entitled, "US Community Bank Failure: An Empirical Investigation," examines the declining, but still pivotal role, of the US community banking industry. The study utilizes survival analysis to determine which accounting and macroeconomic variables help to predict community bank failure. Federal Deposit Insurance Corporation and Federal Reserve Bank data are utilized to compare 452 community banks which failed between

A methodology for radiological accidents analysis in industrial gamma radiography

International Nuclear Information System (INIS)

Silva, F.C.A. da.

1990-01-01

A critical review of 34 published severe radiological accidents in industrial gamma radiography, that happened in 15 countries, from 1960 to 1988, was performed. The most frequent causes, consequences and dose estimation methods were analysed, aiming to stablish better procedures of radiation safety and accidents analysis. The objective of this work is to elaborate a radiological accidents analysis methodology in industrial gamma radiography. The suggested methodology will enable professionals to determine the true causes of the event and to estimate the dose with a good certainty. The technical analytical tree, recommended by International Atomic Energy Agency to perform radiation protection and nuclear safety programs, was adopted in the elaboration of the suggested methodology. The viability of the use of the Electron Gamma Shower 4 Computer Code System to calculate the absorbed dose in radiological accidents in industrial gamma radiography, mainly at sup(192)Ir radioactive source handling situations was also studied. (author)

ANALYSIS OF DEVELOPING BATIK INDUSTRY CLUSTER IN BAKARAN VILLAGE CENTRAL JAVA PROVINCE

Directory of Open Access Journals (Sweden)

Hermanto Hermanto

2017-06-01

Full Text Available SMEs grow in a cluster in a certain geographical area. The entrepreneurs grow and thrive through the business cluster. Central Java Province has a lot of business clusters in improving the regional economy, one of which is batik industry cluster. Pati Regency is one of regencies / city in Central Java that has the lowest turnover. Batik industy cluster in Pati develops quite well, which can be seen from the increasing number of batik industry incorporated in the cluster. This research examines the strategy of developing the batik industry cluster in Pati Regency. The purpose of this research is to determine the proper strategy for developing the batik industry clusters in Pati. The method of research is quantitative. The analysis tool of this research is the Strengths, Weakness, Opportunity, Threats (SWOT analysis. The result of SWOT analysis in this research shows that the proper strategy for developing the batik industry cluster in Pati is optimizing the management of batik business cluster in Bakaran Village; the local government provides information of the facility of business capital loans; the utilization of labors from Bakaran Village while improving the quality of labors by training, and marketing the Bakaran batik to the broader markets while maintaining the quality of batik. Advice that can be given from this research is that the parties who have a role in batik industry cluster development in Bakaran Village, Pati Regency, such as the Local Government.

GAMBARAN UMUM SEKTOR UNGGULAN DAN KONTRIBUSI SEKTOR PERTANIAN DI PROVINSI JAWA TIMUR (OLAH DATA TABEL INPUT-OUTPUT PROVINSI JAWA TIMUR TAHUN 2010

Directory of Open Access Journals (Sweden)

Azizatun Nurhayati

2015-10-01

Full Text Available Pembangunan daerah dilakukan dengan memaksimalkan potensi sumber daya yang ada di suatu daerah. Karena sebagian besar penduduk Indonesia adalah petani, maka penting untuk mengetahui kontribusi sektor pertanian terhadap perekonomian suatu daerah. Makalah ini bertujuan untuk mengetahui kontribusi sektor pertanian terhadap multiplier output, pengganda pendapatan, dan pengganda tenaga kerja. Metode yang digunakan dalam penelitian ini adalah Analisis Input Output yang diperoleh dari Badan Pusat Statistik Provinsi Jawa Timur Tahun 2010. Hasil penelitian menunjukkan bahwa komoditas tebu berada pada kuadran II, Dari keseluruhan data di atas maka dapat disimpulkan bahwa (1 Komoditas tebu dapat mendorong berkembangnya industri gula di Jawa Timur, (2 di sektor peternakan, subsektor yang dapat dikembangkan adalah pakan ternak, pemotongan hewan, sapi, kambing dan domba, serta ayam (3 di sektor pengolahan subsektor pengolahan es krim, beras, dan penggilingan padi serta rokok. ABSTRACTLocal development is held by maximizing potential resources in a particular region. In addition, most of Indonesian people are farmers so it’s important to identify the agriculural contribution in local economic. The aim of this study are to study the contribution of agriculture  in ouput multiplier, income multiplier, and employment multiplier. The method which was used in this research was input-output analysis based on Badan Pusat Statistik East Java Province’s data in 2010. From the analysis, we can conclude that the sugarcane was formed in the second quadrant, in which (1sugarcane comodity promoted the sugar industry in East Java Province (2 in livestock subsector, the woof of livestock industry, animals truncation, sheeps, goats, and chicken husbandry (poultry were potentially to be developed (3 in processing subsector which was based on agriculture product, ice cream and processing, rice milling and cigarette were potentially to be developed. 

Market niche analysis in the casino gaming industry.

Science.gov (United States)

Dandurand, L

1990-03-01

This article discusses the nature of market niche analysis in the casino gaming industry. It presents four approaches for conducting market niche analysis. An an example of one approach, the Las Vegas Visitor Profile Study is used to identify a premium niche in the Las Vegas Slot Target Market. A detailed examination of the premium niche profile provides a description of the typical premium slot player. The description of the typical premium player leads to hypotheses regarding needs (the unique preference set) of the premium player. An analysis of the unique preference set suggests an appropriate enhanced marketing program.

Loss of coolant accident analysis (thermal hydraulic analysis) - Japanese industries experience

International Nuclear Information System (INIS)

Okabe, K.

1995-01-01

An overview of LOCA analysis in Japanese industry is presented. The BASH-M code, developed for large scale LOCA reflooding analysis, is given as an example of verification and improvement of US computer programs are given. The code's application to the operational safety analysis concerns the following main areas: 1D drift flux model base computer program CANAC; CANAC-based advanced training simulator; emergency operating procedures. The author considers also the code application to the following new PWR safety design concepts: use of steam generators for decay heat removal at LOCA conditions; use of horizontal type steam generator for maintaining two-phase natural circulation under the reactor coolant system submerged. 9 figs

When policy is not enough: prospects and challenges of artisanal ...

African Journals Online (AJOL)

ASM was identified as an important platform where disadvantaged South Africans can participate and benefit from the mining industry. This is because of the potential benefits that government has sought to support the sub-sector. In the past two decades, several programmes and initiatives have been introduced to promote ...

Exergy analysis of industrial ammonia synthesis

International Nuclear Information System (INIS)

Kirova-Yordanova, Zornitza

2004-01-01

Exergy consumption of ammonia production plants depends strongly on the ammonia synthesis loop design. Due to the thermodynamically limited low degree of conversion of hydrogen-nitrogen mixture to ammonia, industrial ammonia synthesis is implemented as recycle process (so-called 'ammonia synthesis loop'). Significant quantities of reactants are recycled back to reactor, after the removal of ammonia at low temperatures. Modern ammonia synthesis plants use well-developed heat- and cold recovery to improve the reaction heat utilisation and to reduce the refrigeration costs. In this work, the exergy method is applied to estimate the effect of the most important process parameters on the exergy efficiency of industrial ammonia synthesis. A specific approach, including suitable definitions of the system boundaries and process parameters, is proposed. Exergy efficiency indexes are discussed in order to make the results applicable to ammonia synthesis loops of various designs. The dependence of the exergy losses on properly selected independent process parameters is studied. Some results from detailed exergy analysis of the most commonly used ammonia synthesis loop design configurations at a wide range of selected parameters values are shown

Emergy-based comparative analysis of energy intensity in different industrial systems.

Science.gov (United States)

Liu, Zhe; Geng, Yong; Wang, Hui; Sun, Lu; Ma, Zhixiao; Tian, Xu; Yu, Xiaoman

2015-12-01

With the rapid economic development, energy consumption of China has been the second place in the world next to the USA. Usually, measuring energy consumption intensity or efficiency applies heat unit which is joule per gross domestic production (GDP) or coal equivalent per GDP. However, this measuring approach is only oriented by the conversion coefficient of heat combustion which does not match the real value of the materials during their formation in the ecological system. This study applied emergy analysis to evaluate the energy consumption intensity to fill this gap. Emergy analysis is considered as a bridge between ecological system and economic system, which can evaluate the contribution of ecological products and services as well as the load placed on environmental systems. In this study, emergy indicator for performing energy consumption intensity of primary energy was proposed. Industrial production is assumed as the main contributor of energy consumption compared to primary and tertiary industries. Therefore, this study validated this method by investigating the two industrial case studies which were Dalian Economic Development Area (DEDA) and Fuzhou economic and technological area (FETA), to comparatively study on their energy consumption intensity between the different kinds of industrial systems and investigate the reasons behind the differences. The results show that primary energy consumption (PEC) of DEDA was much higher than that of FETA during 2006 to 2010 and its primary energy consumption ratio (PECR) to total emergy involvement had a dramatically decline from year 2006 to 2010. In the same time, nonrenewable energy of PEC in DEDA was also much higher than that in FETA. The reason was that industrial structure of DEDA was mainly formed by heavy industries like petro-chemistry industry, manufacturing industries, and high energy-intensive industries. However, FETA was formed by electronic business, food industry, and light industries. Although

Measuring service quality and a comparative analysis in airline industry

Directory of Open Access Journals (Sweden)

Mohammad Mehdi Izadi

2013-01-01

Full Text Available Quality of services in airline industry plays an important role in market penetration and customer retention. In this paper, we present a factor analysis to find important factors in Iranian Airline industry. The study designs a questionnaire consist of 35 questions and distribute it among 200 customers who regularly use services from 16 different airlines and they are investigated based on the implementation of factor analysis. The results of our survey determines seven important factors including physical features of the environment, Kettering, Pre-flight passenger services, Ability to respond, Reliability, Passenger service flight and Virtual Passenger Services. The paper discusses that improving these seven factors can significantly improve service quality in this sector.

Analysis of Intra-Industry Trade in Turkish Automotive Sector

Directory of Open Access Journals (Sweden)

Füsun YENİLMEZ

2018-01-01

Full Text Available The automotive sector is one of the important sectors affecting the economy of a country. Considering the export and import size of the sector, any kind of work to be done for the sector is important. The analysis of Turkey's situation in the sector will contribute to R&D studies to develop the sector, strategic planning and determination of short, medium and long term targets. The aim of the paper is to determine the location of the Turkish automotive industry in world trade. For this purpose, firstly products in the automotive sector foreign trade were reduced to three sub-digit and included in the evaluation. Grubel-Lloyd index is used in the analysis. As a result of the analyzes, Turkey has been determined separately according to the product groups of the countries that have the most intensive trade in industry.

Analysis of causes of radiation overexposures for radiation workers in industrial radiography

International Nuclear Information System (INIS)

Mahajan, J.M.; Massand, O.P.

2001-01-01

About 5500 radiation workers are monitored from industrial institutions in our country out of which 3600 radiation workers are working in industrial radiography institutions. These workers have a higher potential of receiving overexposure (equivalent dose 3 10 mSv) due to their nature of work. This paper presents analysis of overexposures and their causes for radiation workers working in industrial radiography institutions during the last seven years. (author)

FEASIBILITY ANALYSIS ON INDUSTRIAL SYMBIOSIS BETWEEN CEMENT INDUSTRY AND TEA INDUSTRY

Directory of Open Access Journals (Sweden)

Shailendra Kumar Yadav

2015-08-01

Full Text Available The project aims at analyzing the feasibility of utilizing cement kiln dust (CKD in treating wastewater from tea industry with the concept of industrial symbiosis. CKD is the dust collected at the air pollution control device(s associated with a kiln system from cement industry. A very less percent of CKD is recycled and the rest is land filled /stockpiled; disrupts groundwater through leaching of minerals. Cement Kiln Dust (CKD, rich in CaO, SiO2, behaves as a neutralizing as well as stabilizing agent for tea effluent treatment. The ability of CKD to reduce the BOD, COD, TSS, and phosphates in tea effluent was analyzed and the optimum dosage is determined. The effect of different dosages of Cement Kiln Dust ranging from (1-3 gm/l has been discussed on the bench scale tests. The results show that, for different CKD concentrations, high removal efficiencies of 94.4 and 99.0, 58.9 for BOD, TSS, phosphates and a lower efficiency for COD with 9.09 are achieved for 2.5gm/l. The persistent presence of color providing proteins theaflavins (TF and the arubigins (TR from the leftover tea leaves in the effluent imparts the low removal efficiencies of COD. However, the COD value is within the dischargeable limits (CPCB standards. Moreover, a considerable removal efficiency and high SVI of 0.181 makes CKD a feasible coagulant in treating tea effluent with optimum dosage of 2.5g/l. The objective of developing industrial symbiosis network was thus achieved using the CKD to treat wastewater from tea industries.   International Journal of EnvironmentVolume-4, Issue-3, June-August 2015Page: 20-34

Process analysis and data driven optimization in the salmon industry

DEFF Research Database (Denmark)

Johansson, Gine Ørnholt

Aquaculture supplies around 70% of the salmon in the World and the industry is thus an important player in meeting the increasing demand for salmon products. Such mass production calls for systems that can handle thousands of tonnes of salmon without compromising the welfare of the fish...... and the following product quality. Moreover, the requirement of increased profit performance for the industry should be met with sustainable production solutions. Optimization during the production of salmon fillets could be one feasible approach to increase the outcome from the same level of incoming raw material...... and analysis of data from the salmon industry could be utilized to extract information that will support the industry in their decision-making processes. Mapping of quality parameters, their fluctuations and influences on yield and texture has been investigated. Additionally, the ability to predict the texture...

THE PROGNOSIS OF RUSSIAN DEFENSE INDUSTRY DEVELOPMENT IMPLEMENTED THROUGH REGRESSION ANALYSIS

Directory of Open Access Journals (Sweden)

L.M. Kapustina

2007-03-01

Full Text Available The article illustrates the results of investigation the major internal and external factors which influence the development of the defense industry, as well as the results of regression analysis which quantitatively displays the factorial contribution in the growth rate of Russian defense industry. On the basis of calculated regression dependences the authors fulfilled the medium-term prognosis of defense industry. Optimistic and inertial versions of defense product growth rate for the period up to 2009 are based on scenario conditions in Russian economy worked out by the Ministry of economy and development. In conclusion authors point out which factors and conditions have the largest impact on successful and stable operation of Russian defense industry.

Reactor neutron activation analysis of industrial materials

International Nuclear Information System (INIS)

Niese, S.

1983-01-01

The specific application of neutron activation analysis (n.a.a.) for industrial materials is demonstrated by the determination of impurities in BeO, Al, Si, Cu, Ge, GaP, GaAs, steel, and irradiated uranium. A group scheme gives an orientation about the possibilities of n.a.a. The use of different standards, methods for the measurement of low radioactivities and errors caused by recoil reaction and radiation stimulated diffusion are discussed. (author)

Analysis of Expectations of Forest Products Industry from Forest Industry Engineering Education

OpenAIRE

GEDİK, Tarık; ÇİL, Muhammet; SEVİM KORKUT, Derya; CEMİL AKYÜZ, Kadri; KOŞAR, Gökşen; BEKAR, İlter

2016-01-01

Forest industry engineers, representing the qualified labor within the forest products industry, choose their field of study either deliberately or by chance. This study explores the main skill sets of forest industry engineers required by forest products industry. As representatives of forest industry owner of forest products companies were surveyed about their views on the qualifications a forest industry engineer must have.This study covered total 7111 companies registered to TOBB as a for...

Empirical evidence from an inter-industry descriptive analysis of overall materiality measures

OpenAIRE

N. Pecchiari; C. Emby; G. Pogliani

2013-01-01

This study presents an empirical cross-industry descriptive analysis of overall quantitative materiality measures. We examine the behaviour of four commonly used quantitative materiality measures within and across industries with respect to their size, relative size and stability, over ten years. The sample consists of large- and medium-sized European companies, representing 24 different industry categories for the years 1998 through 2007 (a total sample of over 36,000 data points). Our resul...

Furniture Industry in Kenya : Situational Analysis and Strategy

OpenAIRE

Creapo Oy; World Bank Group

2015-01-01

The Government of Kenya recognizes that the performance of the furniture sector is crucial both to employment and growth in the country. The Ministry of Industrialization and Enterprise Development (MOIED) therefore requested an analysis of both the furniture and timber sectors, in order to understand their current state of development, their main constraints, and the interventions necessa...

The Book Publishing and Manufacturing Industry in Canada; A Statistical and Economic Analysis.

Science.gov (United States)

Ernst and Ernst, Montreal (Quebec).

The fundamental objective of the study is to obtain a detailed analysis of the book publishing industry and the book printing industry in Canada, in order to determine what steps the Federal Government might take to assist the industry in improving its viability and in promoting its stability and growth. This objective implies that the study will…

Analysis of Defense Industry Consolidation Effects on Program Acquisition Costs

National Research Council Canada - National Science Library

Hoff, Russell V

2007-01-01

.... This thesis examines whether cost changes are evident following consolidation within the defense industry by conducting a regression analysis of Major Defense Acquisition Programs across 13 broad defense market sectors...

Applicability of BEE requirements for tour operating enterprises in ...

African Journals Online (AJOL)

This article focuses on tour operating, one of the key sub-sectors of the tourism industry. The research highlights the profile of tour operating enterprises in South Africa, and evaluates their ability to comply with BEE requirements, as well as the utilization of tourism incentives. Data were collected by questionnaire through a ...

Analysis of low-carbon industrial symbiosis technology for carbon mitigation in a Chinese iron/steel industrial park: A case study with carbon flow analysis

International Nuclear Information System (INIS)

Zhang, Hui; Dong, Liang; Li, Huiquan; Fujita, Tsuyoshi; Ohnishi, Satoshi; Tang, Qing

2013-01-01

CO 2 mitigation strategies in industrial parks are a significant component of the Chinese climate change mitigation policy, and industrial symbiosis can provide specific CO 2 mitigation opportunity. Technology is important to support symbiosis, but few studies in China have focused on this topic at the industrial park level. This research presented a case study in a national iron and steel industrial park in China. Focus was given onto carbon mitigation through industrial symbiosis technology using substance flow analysis (SFA). Three typical iron and steel industry technologies, including coke dry quenching (CDQ), combined cycle power plant (CCPP), and CO 2 capture by slag carbonization (CCSC) were evaluated with SFA. Technology assessment was further conducted in terms of carbon mitigation potential and unit reduction cost. Compared with the Business as usual (BAU) scenario, application with CDQ, CCPP, and CCSC reduced the net carbon emissions by 56.18, 134.43, and 222.89 kg CO 2 per ton crude steel inside the industrial parks, respectively, including both direct and indirect emissions. Economic assessment revealed that the unit costs for the three technologies were also high, thereby necessitating national financial support. Finally, relevant policy suggestions and future concerns were proposed and discussed. - Highlights: • A typical carbon mitigation case study on China iron/steel industrial park. • Using carbon SFA to investigate mitigation effects of industrial symbiosis technology. • CCPP greatly reduced the indirect carbon emission embodied in power purchase. • CCSC reduced the carbon emission by distributing fixed carbon into by-product. • Specific low carbon-tech promotion policies fit to China was discussed and proposed

Analysis of Market Opportunities for Chinese Private Express Delivery Industry

Science.gov (United States)

Jiang, Changbing; Bai, Lijun; Tong, Xiaoqing

China's express delivery market has become the arena in which each express enterprise struggles to chase due to the huge potential demand and high profitable prospects. So certain qualitative and quantitative forecast for the future changes of China's express delivery market will help enterprises understand various types of market conditions and social changes in demand and adjust business activities to enhance their competitiveness timely. The development of China's express delivery industry is first introduced in this chapter. Then the theoretical basis of the regression model is overviewed. We also predict the demand trends of China's express delivery market by using Pearson correlation analysis and regression analysis from qualitative and quantitative aspects, respectively. Finally, we draw some conclusions and recommendations for China's express delivery industry.

Analysis of costs structure of the industrial enterprise

Directory of Open Access Journals (Sweden)

Yuriy V. Kovtunenko

2014-12-01

Full Text Available Costs are an important factor that affects the economic activities of an industrial enterprise, because they affect the profits of the enterprise on production efficiency and competitiveness. The article aims to summarize approaches of the definition of “costs”, classification costs of the enterprise according to different characteristics and cost structure of industrial enterprises. Each scientist has his own opinion on the choice of the structure and classification of costs, which is based on his own experience and experience of other scientists. Economically justified classification of costs is an important factor for analysis and costs accounting. This paper examines the concept of “costs” in the interpretation of various authors based on research of scientists that highlight the main features of the classification of costs, give the cost structure of industrial enterprises. Based on the study it can be concluded that the standard classification of costs is not for all companies. Therefore, it is necessary to develop a classification of costs according to the main features of the company.

A Strategic Analysis of Import of the WTO Accession on China's Telecommunications Industry

OpenAIRE

Lei, Zhang

2007-01-01

The dissertation is divided into two parts, namely, an overview of China's telecommunications industry and the strategic analysis of the influence of China's telecom industry accession to the WTO. Based on the several strategic management classical frameworks, the main aim of this piece of research is to analyze the external and internal environment of China's telecommunication industry and the impact of China's entry into WTO on this industry. Specifically, this aim is decomposed into the fo...

INDUSTRIAL/MILITARY ACTIVITY-INITIATED ACCIDENT SCREENING ANALYSIS

Energy Technology Data Exchange (ETDEWEB)

D.A. Kalinich

1999-09-27

Impacts due to nearby installations and operations were determined in the Preliminary MGDS Hazards Analysis (CRWMS M&O 1996) to be potentially applicable to the proposed repository at Yucca Mountain. This determination was conservatively based on limited knowledge of the potential activities ongoing on or off the Nevada Test Site (NTS). It is intended that the Industrial/Military Activity-Initiated Accident Screening Analysis provided herein will meet the requirements of the ''Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants'' (NRC 1987) in establishing whether this external event can be screened from further consideration or must be included as a design basis event (DBE) in the development of accident scenarios for the Monitored Geologic Repository (MGR). This analysis only considers issues related to preclosure radiological safety. Issues important to waste isolation as related to impact from nearby installations will be covered in the MGR performance assessment.

Analysis of Usefulness of a Fuzzy Transform for Industrial Data Compression

International Nuclear Information System (INIS)

Sztyber, Anna

2014-01-01

This paper presents the first part of an ongoing work on detailed analysis of compression algorithms and development of an algorithm for implementation in a real industrial data processing system. Fuzzy transforms give promising results in an image compression. The main aim of this paper is to test the possibility of an application of the fuzzy transforms to the industrial data compression. Test are carried out on the data from DAMADICS benchmark. Comparison is provided with a piecewise linear compression, which is nowadays the standard in the industry. The last section contains discussion of the obtained results and plans for the future work

Impact of Deficient Electricity Supply on the Operations of Small Scale Businesses in North East Nigeria

Directory of Open Access Journals (Sweden)

Ahmed Ado

2015-03-01

Full Text Available Electricity supply in Nigeria is often erratic. Consumers of electricity (residential, commercial and industrial consumers suffer untold hardships as the State Owned Enterprise; the Power Holding Company of Nigeria (PHCN has been unable to supply reliable power. This is despite massive injections of funds by the Federal Government into the operations of the company over recent years. The failure has significantly impacted negatively on the operations of the business sector especially the small scale subsector that operates with little capital and are thus in most cases unable to afford a back-up facility to ensure un-interrupted power supply for their operations. The study examined the impact of deficient electric power supply on the operations of small scale businesses operating in north east of Nigeria. From the population of small scale businesses, a sample was selected through the use of stratified random sampling to ensure the effective representation of the population of small scale businesses in north east Nigeria. Results from data analysis indicates the severity of electricity supply outages and the costs imposed by power supply outages on the operation of this class of businesses in the region. The paper therefore recommends the need for policy attention towards revitalizing the electricity sector of Nigeria for enhanced supply of electricity to the national economy. When this is achieved, the small business sub-sector will be in a position to effectively lead in the drive towards industrializing the Nigerian economy.

Reliability Analysis Of Fire System On The Industry Facility By Use Fameca Method

International Nuclear Information System (INIS)

Sony T, D.T.; Situmorang, Johnny; Ismu W, Puradwi; Demon H; Mulyanto, Dwijo; Kusmono, Slamet; Santa, Sigit Asmara

2000-01-01

FAMECA is one of the analysis method to determine system reliability on the industry facility. Analysis is done by some procedure that is identification of component function, determination of failure mode, severity level and effect of their failure. Reliability value is determined by three combinations that is severity level, component failure value and critical component. Reliability of analysis has been done for fire system on the industry by FAMECA method. Critical component which identified is pump, air release valve, check valve, manual test valve, isolation valve, control system etc

Energy efficiency of China's industry sector: An adjusted network DEA (data envelopment analysis)-based decomposition analysis

International Nuclear Information System (INIS)

Liu, Yingnan; Wang, Ke

2015-01-01

The process of energy conservation and emission reduction in China requires the specific and accurate evaluation of the energy efficiency of the industry sector because this sector accounts for 70 percent of China's total energy consumption. Previous studies have used a “black box” DEA (data envelopment analysis) model to obtain the energy efficiency without considering the inner structure of the industry sector. However, differences in the properties of energy utilization (final consumption or intermediate conversion) in different industry departments may lead to bias in energy efficiency measures under such “black box” evaluation structures. Using the network DEA model and efficiency decomposition technique, this study proposes an adjusted energy efficiency evaluation model that can characterize the inner structure and associated energy utilization properties of the industry sector so as to avoid evaluation bias. By separating the energy-producing department and energy-consuming department, this adjusted evaluation model was then applied to evaluate the energy efficiency of China's provincial industry sector. - Highlights: • An adjusted network DEA (data envelopment analysis) model for energy efficiency evaluation is proposed. • The inner structure of industry sector is taken into account for energy efficiency evaluation. • Energy final consumption and energy intermediate conversion processes are separately modeled. • China's provincial industry energy efficiency is measured through the adjusted model.

Urban Integrated Industrial Cogeneration Systems Analysis. Phase II final report

Energy Technology Data Exchange (ETDEWEB)

1984-01-01

Through the Urban Integrated Industrial Cogeneration Systems Analysis (UIICSA), the City of Chicago embarked upon an ambitious effort to identify the measure the overall industrial cogeneration market in the city and to evaluate in detail the most promising market opportunities. This report discusses the background of the work completed during Phase II of the UIICSA and presents the results of economic feasibility studies conducted for three potential cogeneration sites in Chicago. Phase II focused on the feasibility of cogeneration at the three most promising sites: the Stockyards and Calumet industrial areas, and the Ford City commercial/industrial complex. Each feasibility case study considered the energy load requirements of the existing facilities at the site and the potential for attracting and serving new growth in the area. Alternative fuels and technologies, and ownership and financing options were also incorporated into the case studies. Finally, site specific considerations such as development incentives, zoning and building code restrictions and environmental requirements were investigated.

The analysis and investigation on basic data for development status study on the radioisotope industry

International Nuclear Information System (INIS)

Kim, In Hwan; Shim, H. S.; Chun, I. Y.; Jang, J. H.

2005-12-01

This study is intended to investigate and analysis the use degree of the radioisotope in domestic industry by the data of indirect information in focus of industry using the radioisotope per year basis. The contents and scope of this study is as follows: - Review of the industry sorting methods and application of the UNIDO(United Nation Industry Development organization). - Investigation of RI permitted companies and notified companies by 2003. 12. 31. - The Analysis and investigation of the basic data for the number of workers, wages and salaries of employees, product costs and the value added etc. of RI permitted companies from 1980

An Analysis of Solar Panel Assembly as a Prison Industry

Science.gov (United States)

Lizak, R. M.

1980-01-01

An analysis of the effect of manufacturing solar collectors by California prison inmates is presented. It was concluded that the concept is feasible and would have little adverse effect on the private sector's solar industry.

A Thematic Analysis of Advertisement in the Telecommunication Industry

OpenAIRE

Esther Amah; Olaleke Oluseye Ogunnaike; Adebanji William Ayeni; Mercy Ojo

2017-01-01

The main objective of this research was to determine the types of appeals used in telecommunication advertisement, explain how the themes and appeals used in the advertisement were presented, and see how it could attract subscribers despite the challenges in the industry. Qualitative content analysis method was used to provide a thematic analysis of the messages contained in numbers of selected advertisements shown on YouTube, social media, and television stations in Nigeria. The findings sho...

Empirical Analysis of Green Supply Chain Management Practices in Indian Automobile Industry

Science.gov (United States)

Luthra, S.; Garg, D.; Haleem, A.

2014-04-01

Environmental sustainability and green environmental issues have an increasing popularity among researchers and supply chain practitioners. An attempt has been made to identify and empirically analyze green supply chain management (GSCM) practices in Indian automobile industry. Six main GSCM practices (having 37 sub practices) and four expected performance outcomes (having 16 performances) have been identified by implementing GSCM practices from literature review. Questionnaire based survey has been made to validate these practices and performance outcomes. 123 complete questionnaires were collected from Indian automobile organizations and used for empirical analysis of GSCM practices in Indian automobile industry. Descriptive statistics have been used to know current implementation status of GSCM practices in Indian automobile industry and multiple regression analysis has been carried out to know the impact on expected organizational performance outcomes by current GSCM practices adopted by Indian automobile industry. The results of study suggested that environmental, economic, social and operational performances improve with the implementation of GSCM practices. This paper may play an important role to understand various GSCM implementation issues and help practicing managers to improve their performances in the supply chain.

Theoretical and methodological construction of ecological economic and analysis of operations industrial enterprises

Directory of Open Access Journals (Sweden)

D.O. Gritsishen

2015-09-01

Full Text Available To form an effective analytical maintenance of economic and environmental security of industrial enterprises were justified assumptions of ecological and economic analysis. In particular, the goal (the formation of the effect of business enterprises, based on established causal link that allows you to get a comprehensive assessment to management decisions to change the parameters of governance in general and individual management subsystems aimed at ensuring the environmental and economic safety of industrial enterprise and task object (causal relationships that characterize the state of the relationship of economic activity to the environment and determine the level of environmental and economic security of industrial enterprise and object (economic activity in partial relationship with the environment that determine the level of environmental and economic security of industrial enterprises. It is possible to expand understanding of economic analysis in general and its importance in ensuring effective interaction with the enterprise environment.

Regulation and efficiency: an empirical analysis of the United Kingdom continental shelf petroleum industry

International Nuclear Information System (INIS)

Kashani, H.A.

2005-01-01

The petroleum industry of the United Kingdom Continental Shelf (UKCS) has been subject to various degrees of regulation. Self-sufficiency, security of supply and developing offshore supply industry triggered government regulations that were seen as interventionary and protectionist. This paper tests the extent to which regulations targeting involvement of British offshore supply industry in the UKCS activity created inefficiencies. Data envelopment analysis (DEA), stochastic frontier analysis (SFA), Malmquist Indices, and standard regression analysis are used to measure the amount and address the source of inefficiencies. We will show that such inefficiencies could not be ruled out. The results provide an important insight into the UKCS production techniques and, more generally, into governments' abilities to influence private sector behaviour through contracts and tendering

DMAIC Application and Fault Analysis of Metal Packaging in the Canning Industry

Directory of Open Access Journals (Sweden)

Rafael Santos de Souza

2017-11-01

Full Text Available In the food industry, quality assurance is strongly associated with consumer safety and the risk of compromising the purity of products. Specifically, in the canning industries, rusty, dented or bulging cans may contain bacteria and cause foodborne illness. This article discusses the application of DMAIC and failure analysis to reduce the number of crushed cans in a canning industry. The methodology was of an applied nature, with an exploratory objective, a qualitative and quantitative approach and a case study method used. Through statistical analysis, it was found that the amount of dented packaging in the production process, which comprises the steps of filling, seaming and basketing, was high. The step with the highest number of crushed cans between three stages was seaming. This was followed by the application of FMEA failure analysis related to the use of an automated seaming machine. Finally, an action plan was roposed to solve the problem of cans crushed in the seaming step and the results demonstrate the improvements obtained before the target after 4 months (August-November 2015.

Coastal flooding as a parameter in multi-criteria analysis for industrial site selection

Science.gov (United States)

Christina, C.; Memos, C.; Diakoulaki, D.

2014-12-01

Natural hazards can trigger major industrial accidents, which apart from affecting industrial installations may cause a series of accidents with serious impacts on human health and the environment far beyond the site boundary. Such accidents, also called Na-Tech (natural - technical) accidents, deserve particular attention since they can cause release of hazardous substances possibly resulting in severe environmental pollution, explosions and/or fires. There are different kinds of natural events or, in general terms, of natural causes of industrial accidents, such as landslides, hurricanes, high winds, tsunamis, lightning, cold/hot temperature, floods, heavy rains etc that have caused accidents. The scope of this paper is to examine the coastal flooding as a parameter in causing an industrial accident, such as the nuclear disaster in Fukushima, Japan, and the critical role of this parameter in industrial site selection. Land use planning is a complex procedure that requires multi-criteria decision analysis involving economic, environmental and social parameters. In this context the parameter of a natural hazard occurrence, such as coastal flooding, for industrial site selection should be set by the decision makers. In this paper it is evaluated the influence that has in the outcome of a multi-criteria decision analysis for industrial spatial planning the parameter of an accident risk triggered by coastal flooding. The latter is analyzed in the context of both sea-and-inland induced flooding.

Analysis of harmonic current interaction in an industrial plant

NARCIS (Netherlands)

Cuk, V.; Cobben, J.F.G.; Kling, W.L.; Timens, R.B.

2011-01-01

An analysis of current transients caused by the operation of a nearby device in an industrial plant is presented in the paper. The source of current transients in the factory lighting system was traced to the operation of the nearby six-pulse AC/DC converter. To determine the nature of the

Energy analysis of 108 industrial processes. Phase 1, industrial applications study

Energy Technology Data Exchange (ETDEWEB)

Hamel, B. B.; Brown, H. L.

1979-06-01

Extensive data are compiled for energy balances in 108 industrial processes. Specific information on unit operation, material, temperature, unrecoverable losses, along with the process flow diagram is given for each of the industries. The following industries are included: meak packing; milk; canned fruits and vegetables; baked goods; sugar refining; soybean; textiles; wood products; building materials; alkalies and chlorine; inorganic gases; pigments, chemicals; plastic materials and resins; synthetic rubbers; organic fibers; pharmaceutical preparations; organic chemicals; petroleum products; fertilizers; rubber products; glass; blast furnaces and steel mills; metals; farm machinery; motor vehicles; and photographic materials. The SIC's for each industry are identified.

The Pharmaceutical Industry Beamline of Pharmaceutical Consortium for Protein Structure Analysis

International Nuclear Information System (INIS)

Nishijima, Kazumi; Katsuya, Yoshio

2002-01-01

The Pharmaceutical Industry Beamline was constructed by the Pharmaceutical Consortium for Protein Structure Analysis which was established in April 2001. The consortium is composed of 22 pharmaceutical companies affiliating with the Japan Pharmaceutical Manufacturers Association. The beamline is the first exclusive on that is owned by pharmaceutical enterprises at SPring-8. The specification and equipments of the Pharmaceutical Industry Beamline is almost same as that of RIKEN Structural Genomics Beamline I and II. (author)

Analysis of federal options to support photovoltaic industry growth

Energy Technology Data Exchange (ETDEWEB)

Bennington, G.; Cherdak, A.; Williams, F.

1979-05-01

This report presents the methodology and results of an analysis to determine the impact and leverage of federal options for supporting the growth of the photovoltaic industry. Results were projected for combinations of the following: an aggressive federal research and development program, achievement of a technological breakthrough, and immediate or breakthrough-dependent incentives including direct price reductions, keyed-to-breakeven subsidies, and federal puchases. The modeling methodology and market assumptions were also tested to determine their effect on analysis results.

Publications | Page 257 | IDRC - International Development ...

International Development Research Centre (IDRC) Digital Library (Canada)

A public talk with Globe and Mail journalist Doug Saunders. A third of humanity is on the move—usually from farms ... This study looks at backward linkages to the manufacturing sector in the oil and gas value chain in Angola as a potential driver of industrial development. The study employs a sub-sectoral approach rather ...

Pahoa geothermal industrial park. Engineering and economic analysis for direct applications of geothermal energy in an industrial park at Pahoa, Hawaii

Energy Technology Data Exchange (ETDEWEB)

Moreau, J.W.

1980-12-01

This engineering and economic study evaluated the potential for developing a geothermal industrial park in the Puna District near Pahoa on the Island of Hawaii. Direct heat industrial applications were analyzed from a marketing, engineering, economic, environmental, and sociological standpoint to determine the most viable industries for the park. An extensive literature search produced 31 existing processes currently using geothermal heat. An additional list was compiled indicating industrial processes that require heat that could be provided by geothermal energy. From this information, 17 possible processes were selected for consideration. Careful scrutiny and analysis of these 17 processes revealed three that justified detailed economic workups. The three processes chosen for detailed analysis were: an ethanol plant using bagasse and wood as feedstock; a cattle feed mill using sugar cane leaf trash as feedstock; and a papaya processing facility providing both fresh and processed fruit. In addition, a research facility to assess and develop other processes was treated as a concept. Consideration was given to the impediments to development, the engineering process requirements and the governmental support for each process. The study describes the geothermal well site chosen, the pipeline to transmit the hydrothermal fluid, and the infrastructure required for the industrial park. A conceptual development plan for the ethanol plant, the feedmill and the papaya processing facility was prepared. The study concluded that a direct heat industrial park in Pahoa, Hawaii, involves considerable risks.

Greenhouse Gas Emissions Trading for the Transport Sector

International Nuclear Information System (INIS)

Holmgren, Kristina; Belhaj, Mohammed; Gode, Jenny; Saernholm, Erik; Zetterberg, Lars; Aahman, Markus

2006-12-01

In this study we have analysed different options to apply emissions trading for greenhouse gas emissions to the transport sector. The main focus has been on the EU transport sector and the possibility to include it in the current EU ETS in the trading period beginning in 2013. The purpose was to study how different alternatives will affect different actors. Focus has been on three sub-sectors; road transport, aviation and shipping. The railway sector has only been treated on a general level. The study includes the following three parts: 1. An economic analysis of the consequences of greenhouse gas emissions trading for the transport sector including an analysis of how the total cost for reaching an emission target will be affected by an integrated emissions trading system for the transport sector and the industry (currently included sectors) compared to separate systems for the sectors, 2. An analysis of design possibilities for the different sub-sectors. Discussion of positive and negative aspects with different choices of design parameters, such as trading entity, covered greenhouse gases, allocation of emission allowances and monitoring systems, 3. Examination of the acceptance among different actors for different options of using greenhouse gas emissions trading in the transport sector. When setting up an emissions trading scheme there are a number of design parameters that have to be analysed in order to find an appropriate system, with limited administrative and transaction costs and as small distortions as possible to competitiveness

Regulatory reforms and productivity: An empirical analysis of the Japanese electricity industry

International Nuclear Information System (INIS)

Nakano, Makiko; Managi, Shunsuke

2008-01-01

The Japanese electricity industry has experienced regulatory reforms since the mid-1990s. This article measures productivity in Japan's steam power-generation sector and examines the effect of reforms on the productivity of this industry over the period 1978-2003. We estimate the Luenberger productivity indicator, which is a generalization of the commonly used Malmquist productivity index, using a data envelopment analysis approach. Factors associated with productivity change are investigated through dynamic generalized method of moments (GMM) estimation of panel data. Our empirical analysis shows that the regulatory reforms have contributed to productivity growth in the steam power-generation sector in Japan

Technical change in US industry: A cross-industry analysis

Science.gov (United States)

Nelson, R. R. (Editor)

1981-01-01

The nature of the public policies which have influenced the pace and pattern of technical progress in a number of American industries is studied with the view of assessing the broad effects of these policies. The industries studied are agriculture, pharmaceuticals, semiconductors, computers, civil aircraft, automobiles and residential construction. The policies considered include research and development funding as well as government procurement, education, information dissemination, patent protection, licensing, regulations, and anti-trust policies.

Identification of hand-made and industrial explosives by neutron activation analysis

International Nuclear Information System (INIS)

Kanda, Yukio; Oikawa, Tomomasa; Tokunaga, Osamu; Nakamura, Jun; Kumooka, Yoshio

1979-01-01

A preliminary study was made to evaluate the use of neutron activation analysis for the characterization of hand-made and industrial explosives for forensic purpose. A total of 26 samples of Chinese firecracker, toy fireworks, sulfur and industrial explosives was analysed non-destructively. Chinese firecracker and toy fireworks showed high degree of homogenity within an individual sample and/or within the samples of the same lot. Antimony was found to be a key element in distinguishing between Chinese firecracker samples. The significant differences in ten element contents (K, Ba, Sr, Na, Br, As, Sb, Sc, La, Sm) were found among toy fireworks samples. The sulfur samples of natural origin and of by-product in refining process of oil were analysed, and the elements such as Se, As and Sb were found to be characteristic of the samples of natural origin. In analysis of industrial explosives, K, Ba and Na were detected as a characteristic element in black powder, smokeless powder of single base and Shiraume dynamite samples, respectively. (author)

Waterpipe industry products and marketing strategies: analysis of an industry trade exhibition.

Science.gov (United States)

Jawad, Mohammed; Nakkash, Rima T; Hawkins, Ben; Akl, Elie A

2015-12-01

Understanding product development and marketing strategies of transnational tobacco companies (TTCs) has been of vital importance in developing an effective tobacco control policy. However, comparatively little is known of the waterpipe tobacco industry, which TTCs have recently entered. This study aimed to gain an understanding of waterpipe tobacco products and marketing strategies by visiting a waterpipe trade exhibition. In April 2014, the first author attended an international waterpipe trade exhibition, recording descriptions of products and collecting all available marketing items. We described the purpose and function of all products, and performed a thematic analysis of messages in marketing material. We classified waterpipe products into four categories and noted product variation within categories. Electronic waterpipe products (which mimic electronic cigarettes) rarely appeared on waterpipe tobacco marketing material, but were displayed just as widely. Claims of reduced harm, safety and quality were paramount on marketing materials, regardless of whether they were promoting consumption products (tobacco, tobacco substitutes), electronic waterpipes or accessories. Waterpipe products are diverse in nature and are marketed as healthy and safe products. Furthermore, the development of electronic waterpipe products appears to be closely connected with the electronic cigarette industry, rather than the waterpipe tobacco manufacturers. Tobacco control policy must evolve to take account of the vast and expanding array of waterpipe products, and potentially also charcoal products developed for waterpipe smokers. We recommend that tobacco substitutes be classified as tobacco products. Continued surveillance of the waterpipe industry is warranted. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

A Thematic Analysis of Advertisement in the Telecommunication Industry

Directory of Open Access Journals (Sweden)

Esther Amah

2017-11-01

Full Text Available The main objective of this research was to determine the types of appeals used in telecommunication advertisement, explain how the themes and appeals used in the advertisement were presented, and see how it could attract subscribers despite the challenges in the industry. Qualitative content analysis method was used to provide a thematic analysis of the messages contained in numbers of selected advertisements shown on YouTube, social media, and television stations in Nigeria. The findings show that the advertisements adopt emotional (love, celebrity appearance, music, comedy, humor, drama and rational appeal to persuade the subscribers. Moreover, the themes of the advertisements focus on accomplishment and improve service regarding call charges, network coverage, network quality, and customer service. It further shows that these strategies employed by the telecommunication industry are capable of influencing the choice of the subscribers in the Nigerian market. The research recommends and concludes that companies should consistently engage the appeals used with more emphasis on the emotional appeal to retain their size of the market.

Propuesta metodológica interdisciplinaria para el análisis de las relaciones comerciales presentes en el sector agrícola costarricense: el caso del subsector frijolero

Directory of Open Access Journals (Sweden)

Ileana Ávalos

2011-01-01

Full Text Available El complejo entramado de relaciones de poder genera influencia directa en la construcción de políticas públicas agrícolas y en los procesos de intercambio comercial. En un sector tan sensible como el agrícola, cobra mayor relevancia el reconocimiento, identificación y análisis de las relaciones que se estructuran tanto a nivel sectorial como sub-sectorial. Esta disección es la que podría permitir el planteamiento de renovadas políticas públicas y de estrategias asertivas para el sector agrícola. El presente artículo es producto de una investigación científica denominada ?Dinámica de poder en la agrocadena costarricense de frijol: un estudio a partir del Sello de Apoyo al productor nacional de frijol?, la cual describe las relaciones existentes entre grupos económicos, comerciales y sociales dentro de la agrocadena del frijol. Particularmente este artículo realiza una propuesta metodológica para analizar las relaciones de poder en el sector agrícola, tomando como referencia la experiencia adquirida analizando el subsector frijolero costarricense.

Impact of Six Sigma in a developing economy: analysis on benefits drawn by Indian industries

Directory of Open Access Journals (Sweden)

Darshak A. Desai

2009-12-01

Full Text Available  Overall operational excellence is the key requirement of any business to have global competence and sustained growth. Indian industries are not the exception to this. Six Sigma has emerged as one of the most effective business improvement strategies world wide.  Nothing much has been published so far illustrating an overall experience of Indian industries with Six Sigma. This paper presents an analysis of the impact of Six Sigma on developing economy like India.  The paper provides an insight into what kind of benefits Indian industries are gaining from Six Sigma as a whole. The study further highlights similarity and differences of benefit gained by different scales and sectors of Indian industries through Six Sigma. This exhaustive analysis of the benefits drawn by Indian industries through Six Sigma can assist other industries in India as well as those in other developing countries, who have yet not experimented with Six Sigma, to become more focused regarding their expectations from this improvement drive. 

INDUSTRI KREATIF INDONESIA: PENDEKATAN ANALISIS KINERJA INDUSTRI

Directory of Open Access Journals (Sweden)

Ahmad Kamil

2015-10-01

Full Text Available In 2008, the Department of Commerce of the Republic of Indonesia has launched a creative economic development documents interpreted the 2025 Indonesia became the starting point and guide the development of the creative economy in Indonesia. With the existence of this document, the industry and its stakeholders or other stakeholders can readily develop the creative economy in Indonesia. Economic development in the direction of the creative industries is one manifestation of optimism aspiration to support the Master Plan for the Acceleration and Expansion of Indonesia's Economic Development in realizing the vision of Indonesia are being developed nation. The main objective of this study is the first to analyze the role of the creative industries in Indonesia for labor, value added and productivity, secondly, to analyze the performance trend of the creative industries sector, and third, to analyze the factors affecting the performance of the creative industries sector in Indonesia. Under Indonesia Standard Industrial Classification (ISIC and codes 151-372 (manufacturing industries category identified 18 industry groups belonging to the creative industries, showed that the performance of the national creative industries has been relatively high (in terms of trend analysis of the performance of the industrial creative. Furthermore, regression analysis of panel data (econometrics indicates that company size (SIZE, wages for workers (WAGE and the content of local inputs (LOCAL has a significant impact on the performance of Indonesia's creative industry. Meanwhile, the concentration ratio (CR4 no consequences but have koresi significantly positive effect on the performance of Indonesia’s creative industry.

Market basket analysis in insurance industry

Directory of Open Access Journals (Sweden)

Marzieh Vahidi Roodpishi

2015-04-01

Full Text Available Nowadays, many organizations focus on discovering their customers’ hidden patterns to maintain their competitive position through customer analysis. In fact, more and more organizations are realizing that customers are their most valuable resources. This paper performs a research using data associated with 300 clients of an insurance company in city of Anzali, Iran and they are analyzed using K-Means clustering method. Using demographic variables including gender, age, occupation, education level, marital status, place of residence and clients’ incomes, the study determines the optimal numbers of clusters in order to achieve necessary data for grouping customers. Next, the study uses the method of association rules to find hidden patterns for the insurance industry.

Risk analysis of industrial plants operation

International Nuclear Information System (INIS)

Hubert, Philippe

1989-12-01

This study examines the possibilities of systematic technology risk analysis in view of territorial management (city, urban community, region), including chronic and accidental risks. The objective was to relate this evaluation with those done for permanent water and air pollution. Risk management for pollution are done for a long time. A number of studies were done in urban communities and regions both for air and water pollution. The second objective is related to management of industrial risks: nuclear, petrochemical, transport of hazardous material, pipelines, etc. At the beginning, three possibilities of effects are taken into account: human health, economic aspect and water, and possibilities of evaluation are identified. Elements of risk identification are presented for quantification of results [fr

A SWOT Analysis of Collaborative Strategies between Engineering Universities and Industry in Pakistan

Directory of Open Access Journals (Sweden)

Zaki Rashidi

2014-10-01

Full Text Available Collaboration among academia and industry is a long aspiring vision of every country to promote innovation and commercialization. A deeper analysis of collaborative efforts among this triad may reveal significant aspects to look for well informed decision making. The purpose of this research is to conduct the SWOT (Strengths, Weaknesses, Opportunities, and Threats analysis of collaboration in engineering education, research and practices in Pakistan. The study attempts to identify strengths and weaknesses of the current collaborative strategies; opportunities for establishing strong and rewarding relationships, and threats that may hinder development of this association. It further provides practical schema to establish productive association between the two partners through creative leadership, effective strategic partnership, and systematic modus operandi to way forward with implications for academics, researchers, and industry. The research is qualitative in nature, based on interpretivist approach. The data is collected by using focus group and semi-structured interviews of experts in industry and academia; primary data obtained by these tools is analyzed by using thematic analysis through open and axial coding. The study identifies the barriers in collaborative efforts, and delineates the roles of industry and academia to overcome these barriers along with SWOT matrix in the context of Pakistan

Analysis of the corporate political activity of major food industry actors in Fiji.

Science.gov (United States)

Mialon, Melissa; Swinburn, Boyd; Wate, Jillian; Tukana, Isimeli; Sacks, Gary

2016-05-10

Non-communicable diseases (NCDs) are the leading cause of mortality in Fiji, a middle-income country in the Pacific. Some food products processed sold and marketed by the food industry are major contributors to the NCD epidemic, and the food industry is widely identified as having strong economic and political power. However, little research has been undertaken on the attempts by the food industry to influence public health-related policies and programs in its favour. The "corporate political activity" (CPA) of the food industry includes six strategies (information and messaging; financial incentives; constituency building; legal strategies; policy substitution; opposition fragmentation and destabilisation). For this study, we aimed to gain a detailed understanding of the CPA strategies and practices of major food industry actors in Fiji, interpreted through a public health lens. We implemented a systematic approach to monitor the CPA of the food industry in Fiji for three months. It consisted of document analysis of relevant publicly available information. In parallel, we conducted semi-structured interviews with 10 stakeholders involved in diet- and/or public health-related issues in Fiji. Both components of the study were thematically analysed. We found evidence that the food industry adopted a diverse range of strategies in an attempt to influence public policy in Fiji, with all six CPA strategies identified. Participants identified that there is a substantial risk that the widespread CPA of the food industry could undermine efforts to address NCDs in Fiji. Despite limited public disclosure of information, such as data related to food industry donations to political parties and lobbying, we were able to identify many CPA practices used by the food industry in Fiji. Greater transparency from the food industry and the government would help strengthen efforts to increase their accountability and support NCD prevention. In other low- and middle-income countries, it

Spatiotemporal and economic analysis of industrial excess heat as a resource for district heating

DEFF Research Database (Denmark)

Bühler, Fabian; Petrović, Stefan; Holm, Fridolin Müller

2018-01-01

detailed analysis of the most suitable types of industries and the costs is required, allowing a targeted exploitation of this resource. This work extends the spatial and thermodynamic analysis, to account for the temporal match between industrial excess heat and district heating demands, as well...... as the costs for implementation and operation of the systems. This allows the determination of cost-effective district heating potentials, as well as the analysis of different industries and technological requirements. The results show that the temporal mismatch between excess heat and district heating demand...... and lack of demand, reduces the theoretical substitution potential by almost 30%. If heat storages are introduced, the total potential is reduced by only 10%. A majority of the excess heat can be utilised at socio-economic heating costs lower than the average Danish district heating price and the cost...

Developing business strategies using SWOT analysis in a color crackers industry

Science.gov (United States)

Budiman, I.; Tarigan, U. P. P.; Mardhatillah, A.; Sembiring, A. C.; Teddy, W.

2018-04-01

This research was conducted in color crackers industry in Indonesia. Color crackers are snacks colored in red and white, found as additional in many Indonesian traditional foods. The used traditional business strategies are not appropriate for the market condition in the industrial 4.0 era. The aim of this study is to develop business strategies in this market condition. This research was conducted in several steps using SWOT Analysis, weighting assessment for SWOT questions, Internal Factor Analysis Summary, External Factor Analysis Summary, and Creating SWOT Matrix. Data were collected through interviews and questionnaires with internal and external stakeholders. The result of this research is the business positioned in the first quadrant. This gives the explanation that the traditional strategies used already inappropriate with the current condition. They need to use mixed SO (Strength – Opportunity) strategies or called as the aggressive strategy to win the market competition. The developed SO strategies are: creating distribution network with the customers and utilizing renewable technology.

Does donor proliferation in development aid for health affect health service delivery and population health? Cross-country regression analysis from 1995 to 2010.

Science.gov (United States)

Pallas, Sarah Wood; Ruger, Jennifer Prah

2017-05-01

Previous literature suggests that increasing numbers of development aid donors can reduce aid effectiveness but this has not been tested in the health sector, which has experienced substantial recent growth in aid volume and number of donors. Based on annual data for 1995-2010 on 139 low- and middle-income countries that received health sector aid from donors reporting to the OECD's Creditor Reporting System, the study used two-step system generalized method of moments regression models to test whether the number of health aid donors and an index of health aid donor fragmentation affect health services (measured by DTP3 immunization rate) or health outcomes (measured by infant mortality rate) for three subsectors of health aid. For total health aid and for the general and basic health aid subsector, controlling for economic and political conditions, increases in the number of donors were associated with increases in DTP3 immunization rate and reductions in infant mortality while increases in the donor fragmentation index were associated with decreases in DTP3 immunization rate and increases in infant mortality, though none of these relationships were statistically significant. For the population and reproductive health aid subsector, a one percent increase in the number of donors was associated with a 0.23 percent decrease in DTP3 immunization ( P <  0.01) while a one percent increase in donor fragmentation was associated with a 0.54 percent increase in DTP3 immunization rate ( P <  0.01); associations with infant mortality rates for this subsector were similar to those for total health aid. The results do not provide clear evidence in support of the hypothesis that donor proliferation negatively impacts development results in the health sector. Aid effectiveness policy prescriptions should distinguish responses to donor proliferation versus donor fragmentation and be adapted to specific subsectors of health aid. © The Author 2016. Published by Oxford

What does the alcohol industry mean by 'Responsible drinking'? A comparative analysis.

Science.gov (United States)

Maani Hessari, N; Petticrew, M

2018-03-01

The alcohol industry uses responsible drinking messaging as a central element of its corporate social responsibility (CSR) activities. It has been argued that such messaging is vague, and potentially part of broader CSR activities to protect industry interests at the expense of public health. This study aimed to identify how industry defines responsible drinking, and in what contexts it is used. This was a qualitative documentary analysis of publicly available documents and web pages, including company web pages, press releases, reports and blogs from a representative selection of alcohol producers, and industry social aspect/public relations organizations; these were compared to health NGOs and Public Health England. All materials were coded iteratively using NVivo, and results were analysed using the hermeneutic approach. The term 'responsible drinking' was used almost exclusively by industry or industry-funded organizations. 'Responsible drinking' was not clearly defined with relation to any particular level of alcohol consumption, and government alcohol guidelines were rarely referenced. Responsible drinking is a strategically ambiguous, industry-affiliated term that allows for multiple interpretations. Industry sources rarely reference government drinking guidelines in the context of responsible drinking, stressing individual responsibility and risk management. Public health practitioners should be aware of these distinctions, and use clear language regarding lower risk drinking.

Tailoring a Human Reliability Analysis to Your Industry Needs

Science.gov (United States)

DeMott, D. L.

2016-01-01

Companies at risk of accidents caused by human error that result in catastrophic consequences include: airline industry mishaps, medical malpractice, medication mistakes, aerospace failures, major oil spills, transportation mishaps, power production failures and manufacturing facility incidents. Human Reliability Assessment (HRA) is used to analyze the inherent risk of human behavior or actions introducing errors into the operation of a system or process. These assessments can be used to identify where errors are most likely to arise and the potential risks involved if they do occur. Using the basic concepts of HRA, an evolving group of methodologies are used to meet various industry needs. Determining which methodology or combination of techniques will provide a quality human reliability assessment is a key element to developing effective strategies for understanding and dealing with risks caused by human errors. There are a number of concerns and difficulties in "tailoring" a Human Reliability Assessment (HRA) for different industries. Although a variety of HRA methodologies are available to analyze human error events, determining the most appropriate tools to provide the most useful results can depend on industry specific cultures and requirements. Methodology selection may be based on a variety of factors that include: 1) how people act and react in different industries, 2) expectations based on industry standards, 3) factors that influence how the human errors could occur such as tasks, tools, environment, workplace, support, training and procedure, 4) type and availability of data, 5) how the industry views risk & reliability, and 6) types of emergencies, contingencies and routine tasks. Other considerations for methodology selection should be based on what information is needed from the assessment. If the principal concern is determination of the primary risk factors contributing to the potential human error, a more detailed analysis method may be employed

Analysis of Wastewater Treatment Efficiency in a Soft Drinks Industry

Science.gov (United States)

Boguniewicz-Zabłocka, Joanna; Capodaglio, Andrea G.; Vogel, Daniel

2017-10-01

During manufacturing processes, most industrial plants generate wastewater which could become harmful to the environment. Discharge of untreated or improperly treated industrial wastewaters into surface water could, in fact, lead to deterioration of the receiving water body's quality. This paper concerns wastewater treatment solutions used in the soft drink production industry: wastewater treatment plant effectiveness analysis was determined in terms of basic pollution indicators, such as BOD, COD, TSS and variable pH. Initially, the performance of mechanic-biological systems for the treatment of wastewater from a specific beverages production process was studied in different periods, due to wastewater flow fluctuation. The study then showed the positive effects on treatment of wastewater augmentation by methanol, nitrogen and phosphorus salts dosed into it during the treatment process. Results confirm that after implemented modification (methanol, nitrogen and phosphorus additions) pollution removal occurs mostly with higher efficiency.

Ultrasonic field analysis program for transducer design in the nuclear industry

International Nuclear Information System (INIS)

Singh, G.P.; Rose, J.L.

1980-02-01

An ultrasonic field analysis program is presented that can be used for transducer design in the nuclear industry. Calculation routines that make use of Huygen's principle in a field analysis model are introduced that enable such field characteristics as axial and lateral resolution, beam symmetry, and gain variation throughout the ultrasonic field to be optimized. Mathematical details are presented along with several sample problems that show comparisons with classical results reported in the literature and with experimental data. Several sample problems that are of interest to the nuclear industry are also included, along with some that satisfy both academical and practical curiosity. These include transducer shape effects, pulse shape effects, crystal vibration variation, and an introduction to such novel transducer designs as annular arrays and dual element angle beam transducers

Joint Peru/United States report on Peru/United States cooperative energy assessment. Volume 3. Annexes 2-7

Energy Technology Data Exchange (ETDEWEB)

1979-08-01

This report presents the results of a brief study of industral, mining, and agricultural sector energy demands in Peru. The study establishes current energy demands and sectoral activities, and projects future energy needs through the year 2000. With respect to energy demands, the subsectors covered are: mining and non-ferrous metals, iron and steel, cement, oil refining, petrochemicals, fertilizers, and agriculture (major crops). Total energy demands for these subsectors are developed for 1976, 1985, and 2000, assuming full-capacity operation for the majority of the plants. Potential options developed for reducing energy use in these sectors are: increased coal use, improved energy efficiency in the manufacturing sector, use of agricultural wastes as fuel, possible displacement of oil by hydroelectricity, use of geothermal energy, increased use of water materials for the cement and construction industries, and possible promotion of cogeneration systems (electricity/steam). (MCW)

El financiamiento de las pymes del sector de software y servicios informáticos en Argentina

Directory of Open Access Journals (Sweden)

M. Belen Guercio

2016-09-01

Full Text Available Este artículo estudia la estructura de financiamiento de pymes del subsector de software y servicios informáticos (SSI de la Argentina y compara estas últimas con pymes sector industrial, para los años 2006 y 2010. Los resultados muestran la preponderancia del autofinanciamiento para todas las empresas analizadas, en la que se observa una mayor dependencia de esta fuente de financiamiento para las del subsector SSI. Con respecto a las fuentes externas de financiamiento, en particular para los activos fijos, existe una diferencia entre ambos sectores analizados: las firmas SSI emplean como primera fuente de pasivos corrientes, mientras que las firmas industriales recurren a las instituciones financieras. Estos resultados se alinean con las predicciones de la hipótesis de jerarquía financiera y con el ciclo financiero de crecimiento.

Chemical analysis for waste management in paint industries

International Nuclear Information System (INIS)

Nawaz, Z.; Naveed, S.; Shiekh, N.A.; Sagheer, K.

2005-01-01

The chemical analysis of paint industries waste has been carried out; the main emission sources are the heating of raw materials and lacquer. Also the waste from other applications and production contains high concentration of heavy metals, VOC's, COD, TDS with notable acidity and alkalinity. Based on the analysis it was observed that the major losses of production could be minimized. Further toxic effects of the waste material can be minimized. In this reference measures to minimize production losses should be adopted along with the proper management. These laboratory results also lead to the areas of emissions and waste production during manufacturing process. Solutions have been proposed for process development and integrated waste minimization. (author)

The Public-Private Sector Pay Gap in Ireland: What Lies Beneath?

OpenAIRE

Kelly, Elish; McGuinness, Seamus; O'Connell, Philip J.

2009-01-01

This paper provides a sub-sectoral analysis of changes in the public-private sector pay gap in Ireland between 2003 and 2006. We find that between March 2003 and October 2006 the public sector pay premium increased from 14 to 26 per cent and that there was substantial variation between subsectors of the public service. Within the public service the premium in 2006 was highest in Education and Security Services and lowest in the Civil Service and Local Authorities. In the private sector the pa...

Statistical analysis of incidents reported in the Greek Petrochemical Industry for the period 1997-2003

International Nuclear Information System (INIS)

Konstandinidou, Myrto; Nivolianitou, Zoe; Markatos, Nikolaos; Kiranoudis, Chris

2006-01-01

This paper makes an analysis of all reported accidents and incidents in the Greek Petrochemical Industry for the period spanning from 1997 to 2003. The work performed is related to the analysis of important parameters of the incidents, their inclusion in a database adequately designed for the purposes of this analysis and an importance assessment of this reporting scheme. Indeed, various stakeholders have highlighted the importance of a reporting system for industrial accidents and incidents. The European Union has established for this purpose the Major Accident Reporting System (MARS) for the reporting of major accidents in the Member States. However, major accidents are not the only measure that can characterize the safety status of an establishment; neither are the former the only events from which important lessons can be learned. Near misses, industrial incidents without major consequences, as well as occupational accidents could equally supply with important findings the interested analyst, while statistical analysis of these incidents could give significant insight in the understanding and the prevention of similar incidents or major accidents in the future. This analysis could be more significant, if each industrial sector was separately analyzed, as the authors do for the petrochemical sector in the present article

An innovative application of extended exergy analysis into an industrial park.

Science.gov (United States)

Fan, Yupeng; Qiao, Qi; Fang, Lin

2017-04-01

Exergy is a thermodynamic term used to account all possible useful work theoretically throughout one process when it is brought into equilibrium with its environment. It however cannot directly incorporate non-physical flows, which can be accounted by extensions of the exergy consumption method. Extended exergy, which builds a bridge between thermal and anthropic dimensions, can both measure resource consumption and economic system. In this study, we applied extended exergy analysis to analyze an industrial park, including material consumption, social investment, and environmental influence. The total extended exergy consumption in the study park amounts to 2.52 EJ. The material-based exergy occupies the largest exergy consumption, followed by capital exergy, environmental remediation exergy, and labor exergy in decreasing order. The exergy capacity was proposed to depict the conversion ability from exergy consumption into economic benefits. In the study area, electronic information industry has the largest exergy capacity with a value of 70 RMB/GJ, indicating a high conversion power from exergy to money. New energy vehicles and parts manufacturing occupies bottom rung in terms of exergy capacity. From the view of material consumption, other industry consumed a lot more exergy compared to electronic information industry; for the environmental remediation, other industry has the lowest exergy capacity, indicating it discharged more pollutants than other clusters to output the same amount of money. Therefore, other industry needs to be urgently transformed and upgraded. The study could help to optimize industrial structure and environmental management in industrial parks.

Analysis advanced methods of data bases of industrial experience return

International Nuclear Information System (INIS)

Lannoy, A.; Procaccia, H.

1994-05-01

This is a presentation, through different conceptions of data bases on industrial experience return, of the principal methods for treatments and analyses of the collected data, going from the frequency statistic and factorial analysis, to the the Bayesian statistical decision theory, which is a real decision assistance tool for responsibles, conceivers and operators. Examples in various fields are given (OREDA: Offshore REliability DAta bank for marine drilling platforms, CEDB: Component Event Data Bank for european electric power industry, RDF 93: reliability of electronic components of ''France Telecom'', EVT: failure EVenTs data bank in the french nuclear power plants by ''EDF''). (A.B.). refs., figs., tabs

Industry Study, Environment Industry, Spring 2009

Science.gov (United States)

2009-01-01

practices. For example, the cruising sector of the tourism industry has widely- acknowledged negative environmental impacts (carbon emissions and ocean...Services: An Industry Analysis ,” (2009): 4. http://www.berr.gov.uk/files/file50253.pdf 18 Ibid., 5. 19 EBI, 21 20 Department for Business...Ibid., 26. 50 DataMonitor Country Analysis Report, “Korea: In-Depth PESTLE Insights,” (June 2008): 4. 51 EBI, “3000,” 1-22. 52 Ibid., 5-130, 5

VALUE STREAM COST ANALYSIS IN THE ROMANIAN FOOTWEAR INDUSTRY

Directory of Open Access Journals (Sweden)

Dimi OFILEANU

2015-06-01

Full Text Available Once the Lean philosophy is developed and implemented to all levels in a company, a new accounting system appears: Lean accounting. Value Stream Cost Analysis is the main and the most powerful instrument of Lean accounting. Because of the fact that VSCA allows us to identify the company’s performance at the proper time, we can rapidly intervene to make the adjustments needed. The Romanian footwear industry is competitive worldwide (14th place in the top of exporters, but in order to improve, it has to rapidly react to clients’ expectations. In the case where the companies have a production system based on Lean philosophy, the implementation of VSCA does nothing but improve the obtained results. This article presents a case study of VSCA application in footwear industry.

Human performance analysis of industrial radiography radiation exposure events

International Nuclear Information System (INIS)

Reece, W.J.; Hill, S.G.

1995-01-01

A set of radiation overexposure event reports were reviewed as part of a program to examine human performance in industrial radiography for the US Nuclear Regulatory Commission. Incident records for a seven year period were retrieved from an event database. Ninety-five exposure events were initially categorized and sorted for further analysis. Descriptive models were applied to a subset of severe overexposure events. Modeling included: (1) operational sequence tables to outline the key human actions and interactions with equipment, (2) human reliability event trees, (3) an application of an information processing failures model, and (4) an extrapolated use of the error influences and effects diagram. Results of the modeling analyses provided insights into the industrial radiography task and suggested areas for further action and study to decrease overexposures

[Analysis on oil fume particles in catering industry cooking emission].

Science.gov (United States)

Tan, De-Sheng; Kuang, Yuan-Cheng; Liu, Xin; Dai, Fei-Hong

2012-06-01

By measuring the particulate matter of oil fume which is over 10 microm or below 10 microm separately and using microradiography and Electrical Low Pressure Impactor (ELPI), it is found out the distributing characteristic of oil fume particles in catering industry cooking emission. The result shows that the diameter of the oil fume particles which was sedimentated in the kitchen is between 10-400 microm, the concentration peak value is between 10-100 microm. The diameter of oil fume aerosol is mostly smaller than 1 microm, while the concentration peak value is between 0.063-0.109 microm. In addition, the mass concentration peak value is between 6.560-9.990 microm. Through the analysis to the physical characteristics of oil fume from catering industry cooking emissions, the eigenvalue of the oil fume has been found and the feature matter for monitoring the oil fume has been discovered to provide a reasonable standard for controlling and monitoring the catering industry cooking emission.

Ecological network analysis for a low-carbon and high-tech industrial park.

Science.gov (United States)

Lu, Yi; Su, Meirong; Liu, Gengyuan; Chen, Bin; Zhou, Shiyi; Jiang, Meiming

2012-01-01

Industrial sector is one of the indispensable contributors in global warming. Even if the occurrence of ecoindustrial parks (EIPs) seems to be a good improvement in saving ecological crises, there is still a lack of definitional clarity and in-depth researches on low-carbon industrial parks. In order to reveal the processes of carbon metabolism in a low-carbon high-tech industrial park, we selected Beijing Development Area (BDA) International Business Park in Beijing, China as case study, establishing a seven-compartment- model low-carbon metabolic network based on the methodology of Ecological Network Analysis (ENA). Integrating the Network Utility Analysis (NUA), Network Control Analysis (NCA), and system-wide indicators, we compartmentalized system sectors into ecological structure and analyzed dependence and control degree based on carbon metabolism. The results suggest that indirect flows reveal more mutuality and exploitation relation between system compartments and they are prone to positive sides for the stability of the whole system. The ecological structure develops well as an approximate pyramidal structure, and the carbon metabolism of BDA proves self-mutualistic and sustainable. Construction and waste management were found to be two active sectors impacting carbon metabolism, which was mainly regulated by internal and external environment.

The Element Analysis on The Development of Cattle Industry in Jambi

Directory of Open Access Journals (Sweden)

Sumarsono Sumarsono

2016-06-01

Full Text Available The aim of this study is to formulate the structure of the key elements and determine the development of beef cattle livestock industry system that must be done. The method used is ISM and Fuzzy ME-MCDM.. Results of the ISM data analysis can know that the key element to the needs of the program is the production technology, quality standardization Ranch Cattle, capital, and competent employees. The constraint of program : capital, facilities, infrastructure, quality, human resources, technology, and institutional. For the purpose of the program is to improve the mastery of technology, increase the added value Ranch Cattle, improving competent human resources, and economic development of Ranch Beef Cattle Industry. The results is alternative activities that must be done is the development of systems Industrial raw materials and production process.

Energy analysis for the textile and clothing industry branch; Brancheenergianalyse for textil- og beklaedningsindustrien

Energy Technology Data Exchange (ETDEWEB)

Hansen, J.; Hart, M.; Moeller, J. [DTI, Beklaedning og Tekstil, Herning (Denmark)

1995-09-01

Energy analysis and energy saving measures are proposed for the textile branch. Spinning, weaving, knitting and dye mills are analyzed as well as carpet production industry and clothing industry. Mechanical equipment, drying equipment, processing lines are investigated with regard to the possible energy savings. (EG) 19 refs.

Analysis of Energy Industry Upgrading in Northeast China

Science.gov (United States)

Liu, Xiao-jing; Ji, Yu-liang; Guan, Bai-feng; Jing, Xin

2018-02-01

Promoting regional economic growth and realizing the transformation of the mode of economic growth are in industrial upgrading essence The product is a carrier that represents a series of links of production, management and marketing behind the enterprise, and is a comprehensive reflection of the knowledge and ability of a country or region. Based on the industrial spatial structure, this paper visualizes the industrial space in Northeast China from 2005 to 2015, analyzes the comparative advantages of the energy industry in Northeast China, and examines the status quo of the upgrade of the energy industry according to the industrial upgrading status. Based on the industrial spatial structure, Industry intensity in the industrial space, put forward the future direction of the energy industry upgrade and upgrade path.

An empirical analysis of lumpy investment. The case of US petroleum refining industry

International Nuclear Information System (INIS)

Asano, Hirokatsu

2002-01-01

This paper employs five econometric models to examine lumpy investment and investigates the investment behavior of the US petroleum refining industry. Firms in the industry are classified into three groups by their size. All three groups show zero investment, disinvestment and investment in accordance with economic conditions. The analysis finds the minimum amount of investment and disinvestment for each group, which suggests that the size of fixed costs of investment is substantial, regardless of firm size. However, small firms adjust capital stock more slowly than medium or large firms. The analysis also suggests the existence of a convex adjustment cost

STRUCTURAL ANALYSIS OF MERGERS AND ACQUISITIONS IN THE FOOD INDUSTRY

OpenAIRE

Adams, Wendi L.; Love, H. Alan; Capps, Oral, Jr.

1997-01-01

Determinants of merger and acquisition activity in the food industry are analyzed using logit regression analysis. Factors affecting the food processing, food retailing and food service sectors are considered. Results indicate merger and acquisition activity in all three sectors are significantly influenced by antitrust activity, profitability and real gross domestic product.

Ocean zoning for conservation, fisheries and marine renewable energy: assessing trade-offs and co-location opportunities.

Science.gov (United States)

Yates, Katherine L; Schoeman, David S; Klein, Carissa J

2015-04-01

Oceans, particularly coastal areas, are getting busier and within this increasingly human-dominated seascape, marine biodiversity continues to decline. Attempts to maintain and restore marine biodiversity are becoming more spatial, principally through the designation of marine protected areas (MPAs). MPAs compete for space with other uses, and the emergence of new industries, such as marine renewable energy generation, will increase competition for space. Decision makers require guidance on how to zone the ocean to conserve biodiversity, mitigate conflict and accommodate multiple uses. Here we used empirical data and freely available planning software to identified priority areas for multiple ocean zones, which incorporate goals for biodiversity conservation, two types of renewable energy, and three types of fishing. We developed an approached to evaluate trade-offs between industries and we investigated the impacts of co-locating some fishing activities within renewable energy sites. We observed non-linear trade-offs between industries. We also found that different subsectors within those industries experienced very different trade-off curves. Incorporating co-location resulted in significant reductions in cost to the fishing industry, including fisheries that were not co-located. Co-location also altered the optimal location of renewable energy zones with planning solutions. Our findings have broad implications for ocean zoning and marine spatial planning. In particular, they highlight the need to include industry subsectors when assessing trade-offs and they stress the importance of considering co-location opportunities from the outset. Our research reinforces the need for multi-industry ocean-zoning and demonstrates how it can be undertaken within the framework of strategic conservation planning. Copyright © 2015 Elsevier Ltd. All rights reserved.

Analysis of the European Food Industry

OpenAIRE

Banse, Martin; McDonald, Scott; Joint Research Centre; Institute for Prospective Technological Studies; Kaditi, Eleni

2008-01-01

This report is based on a study assigned to the Centre for European Policy Studies (CEPS) by the European Commission¿s Joint Research Centre, Institute for Prospective Technological Studies (JRC-IPTS) to investigate recent developments in the European food industry and the impact of foreign direct investment (FDI) and trade flows on the food industry in the EU-25. The report illustrates trends in and the structure of the European food industry. Past and possible future developments are ana...

Evaluating efficiency levels comparatively: Data envelopment analysis application for Turkish textile and apparel industry

Directory of Open Access Journals (Sweden)

Canan Saricam

2012-12-01

Full Text Available Purpose: The purpose of this study is to show the usage of DEA in efficiency measurement.Design/methodology/approach: The efficiencies of textile and apparel companies were analyzed by input-oriented DEA model under variable return to scale assumption. The textile and apparel companies quoted in Istanbul Stock Exchange for the period 2003 and 2008 were evaluated in terms of efficiency level providing a framework for the calculation of input excesses and output shortages.Findings: The analysis revealed that the average efficiency scores of the apparel industry was higher than the textile industry and two industries together. The companies in the apparel industry should overcome the lack of insufficient level of exports whereas the textile industry needs to increase gross value added in order to be more efficient.Research limitations/implications: Because of missing data, four companies from textile industry and one company from apparel industry were ignored although they took place in the records of Istanbul Stock Exchange.Practical implications: This study provided a framework for DEA application in determination and comparison of efficiency performance in an industry level.Originality/value: Selecting the groups compared as textile industry, apparel industry and the two industries in general allowed discussing the comparative efficiencies of two industries eliminating the industry specific pitfalls.

A Comparative Quantitative Analysis of Contemporary Big Data Clustering Algorithms for Market Segmentation in Hospitality Industry

OpenAIRE

Bose, Avishek; Munir, Arslan; Shabani, Neda

2017-01-01

The hospitality industry is one of the data-rich industries that receives huge Volumes of data streaming at high Velocity with considerably Variety, Veracity, and Variability. These properties make the data analysis in the hospitality industry a big data problem. Meeting the customers' expectations is a key factor in the hospitality industry to grasp the customers' loyalty. To achieve this goal, marketing professionals in this industry actively look for ways to utilize their data in the best ...

Ratio analysis and Piotroski scoring system in the automobile industry in Croatia

Directory of Open Access Journals (Sweden)

Morana Mesarić

2014-10-01

Full Text Available To gain insight into operational efficiency, sustainable profitability, the ability to fulfil commitments, use of funds borrowed or investment risk or operational self-sufficiency, it is necessary to conduct analyses of financial statements usually known as ratio analysis. The paper provides analyses of five Croatian general distributors of the automobile industry. Ratios used in the analyses are those used in the Piotroski f-scoring analyses, which are famous for assessing financial capacities of enterprises on the stock exchange market. Based on ratios used in Piotroski scoring systems the assessment of five enterprises, as well as the sector as a whole was carried out. The analysis covers the period 2007-2012. That is the period of the rise, falling and recovery of the automotive industry throughout the world as well as the rise, falling and recession of the whole economy including the automobile market. In general, the sector itself is financially unstable and consequently risk exposed. Results are used for preliminary analyses and prediction of the future financial strength of the auto industry in Croatia.

Auditing and analysis of energy consumption of an industrial site in Morocco

International Nuclear Information System (INIS)

Boharb, A.; Allouhi, A.; Saidur, R.; Kousksou, T.; Jamil, A.; Mourad, Y.; Benbassou, A.

2016-01-01

Presently, the industrial sector is responsible for 21% of energy consumption in Morocco. Fully aware about the challenge of reducing energy consumption and related CO_2 emissions by industries, Moroccan authorities have legislated under the new law (n° 47-09 related to energy efficiency) the obligation of energy audit in Moroccan industries. In such a context, this paper is a Level II energy audit (conforming to ASHRAE classification) performed for an industrial site based in Fez (Morocco) specialized in producing and commercializing cattle feed. A detailed analysis of the characteristics of the energy use has identified a mismanagement of the electrical energy. Through the improvement of the DPF (displacement power factor) to a value of 0.98, it was shown that the factory can save about 52758.74 US$ annually. An improvement of energy efficiency of the interior lighting was also performed. The proposed action concerned the voltage regulation and has the potential of reducing 13.6% of the lighting energy consumption with the mitigation of approximately 27 533 of CO_2/year. Furthermore, harmonic treatment by installing passive filters for VSD (variable speed drives) was carried out. The energy savings related to the harmonic treatment were evaluated to be 26 760 kWh/year. - Highlights: • Detailed analysis of energy use in an industrial site in Morocco. • New method of improving energy efficiency for the interior lighting. • Harmonic treatment using a simulation program. • Economic and environmental evaluation of proposed actions.

Hydrogen fluoride (HF) substance flow analysis for safe and sustainable chemical industry.

Science.gov (United States)

Kim, Junbeum; Hwang, Yongwoo; Yoo, Mijin; Chen, Sha; Lee, Ik-Mo

2017-11-01

In this study, the chemical substance flow of hydrogen fluoride (hydrofluoric acid, HF) in domestic chemical industries in 2014 was analyzed in order to provide a basic material and information for the establishment of organized management system to ensure safety during HF applications. A total of 44,751 tons of HF was made by four domestic companies (in 2014); import amount was 95,984 tons in 2014 while 21,579 tons of HF was imported in 2005. The export amount of HF was 2180 tons, of which 2074 ton (China, 1422 tons, U.S. 524 tons, and Malaysia, 128 tons) was exported for the manufacturing of semiconductors. Based on the export and import amounts, it can be inferred that HF was used for manufacturing semiconductors. The industries applications of 161,123 tons of HF were as follows: manufacturing of basic inorganic chemical substance (27,937 tons), manufacturing of other chemical products such as detergents (28,208 tons), manufacturing of flat display (24,896 tons), and manufacturing of glass container package (22,002 tons). In this study, an analysis of the chemical substance flow showed that HF was mainly used in the semiconductor industry as well as glass container manufacturing. Combined with other risk management tools and approaches in the chemical industry, the chemical substance flow analysis (CSFA) can be a useful tool and method for assessment and management. The current CSFA results provide useful information for policy making in the chemical industry and national systems. Graphical abstract Hydrogen fluoride chemical substance flows in 2014 in South Korea.

Automatic Condition Monitoring of Industrial Rolling-Element Bearings Using Motor’s Vibration and Current Analysis

DEFF Research Database (Denmark)

Yang, Zhenyu

2015-01-01

An automatic condition monitoring for a class of industrial rolling-element bearings is developed based on the vibration as well as stator current analysis. The considered fault scenarios include a single-point defect, multiple-point defects, and a type of distributed defect. Motivated by the pot...... characteristic frequencies, sideband effects, time-average of spectra, and selection of fault index and thresholds, are also discussed. The experimental work shows a huge potential to use some simple methods for successful diagnosis of industrial bearing systems.......An automatic condition monitoring for a class of industrial rolling-element bearings is developed based on the vibration as well as stator current analysis. The considered fault scenarios include a single-point defect, multiple-point defects, and a type of distributed defect. Motivated...... is extensively studied under diverse operating conditions: different sensor locations, motor speeds, loading conditions, and data samples from different time segments. The experimental results showed the powerful capability of vibration analysis in the bearing point defect fault diagnosis. The current analysis...

What induced China's energy intensity to fluctuate: 1997-2006?

International Nuclear Information System (INIS)

Liao, Hua; Fan, Ying; Wei, Yi-Ming

2007-01-01

China is the second largest energy consumer in the world. During 1997-2002, China's energy intensity declined by 33%. However, it rose by 10.7% over 2003-2005, and declined by 1.2% in 2006. What induced China's energy intensity to fluctuate so drastically? Industry accounts for approximately 70% of the total energy consumption in China. In this paper, we decompose China's industrial energy intensity changes between 1997 and 2002 into sectoral structural effects and efficiency effects (measured by sectoral energy intensities at two-digit level and including the shifts of product mix in the sub-sector or firm level), using Toernqvist and Sato-Vartia Index methods. The results show that in this period, efficiency effects possibly contributed to a majority of the decline, while the contribution from structural effects was less. During 2003-2005, the excessive expansion of high-energy consuming sub-sectors and the high investment ratio were foremost sources of the increasing energy intensity. Attributed to the government efforts, the energy intensity has started to decline slightly since July 2006. In future, to save more energy, in addition to technical progress, China should attach more importance to optimizing its sectoral structure, and lowering its investment ratio

Declaration of energetic policy

International Nuclear Information System (INIS)

2004-07-01

This statement shows the interest that the Government of Niger covers the energy sector. This area has potential both varied valuable, is developing efficient. Indeed, the energy sector is primarily organized into four (4) sub-sectors, namely electricity sub-sector where more than half the energy consumption is imported. Regarding the hydrocarbon subsector, surveys have shown that Niger has significant reserves. As the sub-sector renewable energy sources are exploited biomass, solar and wind energy. Finally, the sub-sector domestic energy is characterized by the predominance of traditional energy.To ensure the development and implementation of strategies and energy policies the Government has developed institutional and regulatory framework, for the energy sector participates in the economic and social development [fr

Spatial analysis of cattle and shoat population in Ethiopia: growth trend, distribution and market access.

Science.gov (United States)

Leta, Samson; Mesele, Frehiwot

2014-01-01

The livestock subsector has an enormous contribution to Ethiopia's national economy and livelihoods of many Ethiopians. The subsector contributes about 16.5% of the national Gross Domestic Product (GDP) and 35.6% of the agricultural GDP. It also contributes 15% of export earnings and 30% of agricultural employment. The livestock subsector currently support and sustain livelihoods for 80% of all rural population. The GDP of livestock related activities valued at 59 billion birr. Ethiopian livestock population trends, distribution and marketing vary considerably across space and time due to a variety of reasons. This study was aimed to assess cattle and shoat population growth trend, distribution and their access to market. Regression analysis was used to assess the cattle and shoat population growth trend and Geographic Information Systems (GIS) techniques were used to determine the spatial distribution of cattle and shoats, and their relative access to market. The data sets used are agricultural census (2001/02) and annual CSA agricultural sample survey (1995/96 to 2012/13). In the past eighteen years, the livestock population namely cattle, sheep and goat grew from 54.5 million to over 103.5 million with average annual increment of 3.4 million. The current average national cattle, sheep and goat population per km(2) are estimated to be 71, 33 and 29 respectively (excluding Addis Ababa, Afar and Somali regions). From the total livestock population the country owns about 46% cattle, 43% sheep and 40% goats are reared within 10 km radius from major livestock market centres and all-weather roads. On the other hand, three fourth of the country's land mass which comprises 15% of the cattle, 20% of the sheep and 21% of goat population is not accessible to market (greater than 30 km from major livestock market centres). It is found that the central highland regions account for the largest share of livestock population and also more accessible to market. Defining the

Nuclear techniques for on-line analysis in the mineral and energy industries

International Nuclear Information System (INIS)

Sowerby, B.D.; Watt, J.S.

1994-01-01

Nuclear techniques are the basis of many on-line analysis systems which are now widely used in the mineral and energy industries. Some of the systems developed by the CSIRO depend entirely on nuclear techniques; others use a combination of nuclear techniques and microwave, capacitance, or ultrasonic techniques. The continuous analysis and rapid response of these CSIRO systems has led to improved control of mining, processing and blending operations, with increased productivity valued at A$50 million per year to Australia, and $90 million per year world wide. This paper reviews developments in nuclear on-line analysis systems by the On-Line Analysis Group in CSIRO at Lucas Heights. Commercialised systems based on this work analyse mineral and coal slurries and determine the ash and moisture contents of coal and coke on conveyors. This paper also reviews two on-line nuclear analysis systems recently developed and licensed to industry, firstly for the determination of the mass flow rates of oil/water/gas mixtures in pipelines, and secondly for determination of the moisture, specific energy, ash and fouling index in low rank coals. 8 refs., 3 tabs., 4 figs

The Analysis on Leading industries in Central Java Province

Directory of Open Access Journals (Sweden)

Setyani Irmawati

2016-06-01

Full Text Available The purpose of this research is for identifying the types of industriesthat become leading industries in Central Java Province. The methods, used are LQ (SLQ and DLQ and Shift Share. The result of this research shows that the the leading industries in Central Java Province are beverage industry, tobacco processing industry, textile industry, apparel industry, wood industry, printing industry, furniture industry and other processing industries.In the future, the development of the industry should not only focus on the leading industries  but also onnon-leading industries, so that the non leading industries will not be left behind.

Opportunity Analysis for Recovering Energy from Industrial Waste Heat and Emissions

Energy Technology Data Exchange (ETDEWEB)

Viswanathan, Vish V.; Davies, Richard W.; Holbery, Jim D.

2006-04-01

United States industry consumed 32.5 Quads (34,300 PJ) of energy during 2003, which was 33.1% of total U.S. energy consumption (EIA 2003 Annual Energy Review). The U.S. industrial complex yields valuable goods and products. Through its manufacturing processes as well as its abundant energy consumption, it supports a multi-trillion dollar contribution to the gross domestic product and provides millions of jobs in the U.S. each year. Industry also yields waste products directly through its manufacturing processes and indirectly through its energy consumption. These waste products come in two forms, chemical and thermal. Both forms of waste have residual energy values that are not routinely recovered. Recovering and reusing these waste products may represent a significant opportunity to improve the energy efficiency of the U.S. industrial complex. This report was prepared for the U.S. Department of Energy Industrial Technologies Program (DOE-ITP). It analyzes the opportunity to recover chemical emissions and thermal emissions from U.S. industry. It also analyzes the barriers and pathways to more effectively capitalize on these opportunities. A primary part of this analysis was to characterize the quantity and energy value of the emissions. For example, in 2001, the industrial sector emitted 19% of the U.S. greenhouse gases (GHG) through its industrial processes and emitted 11% of GHG through electricity purchased from off-site utilities. Therefore, industry (not including agriculture) was directly and indirectly responsible for emitting 30% of the U.S. GHG. These emissions were mainly comprised of carbon dioxide (CO2), but also contained a wide-variety of CH4 (methane), CO (carbon monoxide), H2 (hydrogen), NMVOC (non-methane volatile organic compound), and other chemicals. As part of this study, we conducted a survey of publicly available literature to determine the amount of energy embedded in the emissions and to identify technology opportunities to capture and

Climate change and the macroeconomic structure in pre-industrial europe: new evidence from wavelet analysis.

Science.gov (United States)

Pei, Qing; Zhang, David D; Li, Guodong; Lee, Harry F

2015-01-01

The relationship between climate change and the macroeconomy in pre-industrial Europe has attracted considerable attention in recent years. This study follows the combined paradigms of evolutionary economics and ecological economics, in which wavelet analysis (spectrum analysis and coherence analysis) is applied as the first attempt to examine the relationship between climate change and the macroeconomic structure in pre-industrial Europe in the frequency domain. Aside from confirming previous results, this study aims to further substantiate the association between climate change and macroeconomy by presenting new evidence obtained from the wavelet analysis. Our spectrum analysis shows a consistent and continuous frequency band of 60-80 years in the temperature, grain yield ratio, grain price, consumer price index, and real wage throughout the study period. Besides, coherence analysis shows that the macroeconomic structure is shaped more by climate change than population change. In addition, temperature is proven as a key climatic factor that influences the macroeconomic structure. The analysis reveals a unique frequency band of about 20 years (15-35 years) in the temperature in AD1600-1700, which could have contributed to the widespread economic crisis in pre-industrial Europe. Our findings may have indications in re-examining the Malthusian theory.

Exploring sustainable manufacturing principles and practices

OpenAIRE

Alayón, Claudia

2016-01-01

The manufacturing industry remains a critical force in the quest for global sustainability. An increasing number of companies are modifying their operations in favor of more sustainable practices. It is hugely important that manufacturers, irrespective of the subsector they belong to, or their organizational size, implement practices that reduce or eliminate negative environmental, social and economic impacts generated by their manufacturing operations. Consequently, scholars have called for ...

Re-Industrialisation and Low-Carbon Economy—Can They Go Together? Results from Stakeholder-Based Scenarios for Energy-Intensive Industries in the German State of North Rhine Westphalia

Directory of Open Access Journals (Sweden)

Stefan Lechtenböhmer

2015-10-01

Full Text Available The German federal state of North Rhine-Westphalia (NRW is home to one of the most important industrial regions in Europe, and is the first German state to have adopted its own Climate Protection Law (CPL. This paper describes the long-term (up to 2050 mitigation scenarios for NRW’s main energy-intensive industrial sub-sectors which served to support the implementation of the CPL. It also describes the process of scenario development, as these scenarios were developed through stakeholder participation. The scenarios considered three different pathways (best-available technologies, break-through technologies, and CO2 capture and storage. All pathways had optimistic assumptions on the rate of industrial growth and availability of low-carbon electricity. We find that a policy of “re-industrialisation” for NRW based on the current industrial structures (assumed here to represent an average growth of NRWs industrial gross value added (GVA of 1.6% per year until 2030 and 0.6% per year from 2030 to 2050, would pose a significant challenge for the achievement of overall energy demand and German greenhouse gas (GHG emission targets, in particular as remaining efficiency potentials in NRW are limited. In the best-available technology (BAT scenario CO2 emission reductions of only 16% are achieved, whereas the low carbon (LC and the carbon capture and storage (CCS scenario achieve 50% and 79% reduction respectively. Our results indicate the importance of successful development and implementation of a decarbonised electricity supply and breakthrough technologies in industry—such as electrification, hydrogen-based processes for steel, alternative cements or CCS—if significant growth is to be achieved in combination with climate mitigation. They, however, also show that technological solutions alone, together with unmitigated growth in consumption of material goods, could be insufficient to meet GHG reduction targets in industry.

An estimation of the energy and exergy efficiencies for the energy resources consumption in the transportation sector in Malaysia

International Nuclear Information System (INIS)

Saidur, R.; Sattar, M.A.; Masjuki, H.H.; Ahmed, S.; Hashim, U.

2007-01-01

The purpose of this work is to apply the useful energy and exergy analysis models for different modes of transport in Malaysia and to compare the result with a few countries. In this paper, energy and exergy efficiencies of the various sub-sectors are presented by considering the energy and exergy flows from 1995 to 2003. Respective flow diagrams to find the overall energy and exergy efficiencies of Malaysian transportation sector are also presented. The estimated overall energy efficiency ranges from 22.74% (1999) to 22.98% (1998) with a mean of 22.82+/-0.06% and that of overall exergy efficiency ranges from 22.44% (2000) to 22.82% (1998) with a mean of 22.55+/-0.12%. The results are compared with respect to present energy and exergy efficiencies in each sub-sector. The transportation sector used about 40% of the total energy consumed in 2002. Therefore, it is important to identify the energy and exergy flows and the pertinent losses. The road sub-sector has appeared to be the most efficient one compared to the air and marine sub-sectors. Also found that the energy and exergy efficiencies of Malaysian transportation sector are lower than that of Turkey but higher than Norway

Tool Efficiency Analysis model research in SEMI industry

Directory of Open Access Journals (Sweden)

Lei Ma

2018-01-01

Full Text Available One of the key goals in SEMI industry is to improve equipment through put and ensure equipment production efficiency maximization. This paper is based on SEMI standards in semiconductor equipment control, defines the transaction rules between different tool states，and presents a TEA system model which is to analysis tool performance automatically based on finite state machine. The system was applied to fab tools and verified its effectiveness successfully, and obtained the parameter values used to measure the equipment performance, also including the advices of improvement.

Chemical and Microbiological Analysis of Certain Water Sources and Industrial Wastewater Samples in Dakahlia Governorate

International Nuclear Information System (INIS)

El-Fadaly, H.; El-Defrawy, M.M.; El-Zawawy, F.; Makia, D.

1999-01-01

The chemical analysis included quantitative measurement of electrical conductivity, alkalinity , hardness sulphate, ph, total dissolved solids, chloride, as well as dissolved oxygen was carried out. The microbiological examination for different water sources and industrial wastewater samples was also conducted. some of heavy metals, Co 2+ Cu 2+ Fe 3+ and Mn 2+ were determined in fresh water, while other metals, such as Cr 6+ , Co 2+ , Zn 2+ and Ni 2+ were measured in industrial wastewater. Results of the chemical analysis showed that all measured parameters were found within the limitation either national or international law, except some samples which showed higher values than the permissible limits for some measured parameters. The microbiological analysis exhibited presence of yeasts, fungi and bacteria. Most bacterial isolates were short rod, spore formers as well as coccoid shaped bacteria. The efficiency of water treatment process on the reduction of microbial load was also calculated. Regarding the pathogenic bacteria, data showed that neither water samples nor industrial wastewater contain pathogens when using specific cultivation media for the examination. Furthermore, data proved the possibility of recycling of the tested industrial wastewater on which some microorganisms can grow. Data showed that the percent of heavy metals removal can reach to more than 70% in some cases as a result to bacterial treatment of industrial wastewater

Industrial energy efficiency with CO2 emissions in China: A nonparametric analysis

International Nuclear Information System (INIS)

Wu, F.; Fan, L.W.; Zhou, P.; Zhou, D.Q.

2012-01-01

Global awareness on energy security and climate change has created much interest in assessing economy-wide energy efficiency performance. A number of previous studies have contributed to evaluate energy efficiency performance using different analytical techniques among which data envelopment analysis (DEA) has recently received increasing attention. Most of DEA-related energy efficiency studies do not consider undesirable outputs such as CO 2 emissions in their modeling framework, which may lead to biased energy efficiency values. Within a joint production framework of desirable and undesirable outputs, in this paper we construct both static and dynamic energy efficiency performance indexes for measuring industrial energy efficiency performance by using several environmental DEA models with CO 2 emissions. The dynamic energy efficiency performance indexes have further been decomposed into two contributing components. We finally apply the indexes proposed to assess the industrial energy efficiency performance of different provinces in China over time. Our empirical study shows that the energy efficiency improvement in China's industrial sector was mainly driven by technological improvement. - Highlights: ► China's industrial energy efficiency is evaluated by DEA models with CO 2 emissions. ► China's industrial energy efficiency improved by 5.6% annually since 1997. ► Industrial energy efficiency improvement in China was mainly driven by technological improvement.

Significance of material analysis in industry

International Nuclear Information System (INIS)

Bourke, T.M.

1999-01-01

Full text: Most industries need to have laboratories to meet production, customer and statutory requirements. Failure to have such a service would result in production losses, material failures and customer complaints leading to expensive claims for damages. Laboratory functions are to monitor production processes, certify the end product and assist in trouble shooting production problems and material failures. This means that laboratories are an essential part of industry and need to have access to a wide range of instrumentation (XRF, XRD, AES, ICP, SEM, etc). Monitoring and reporting on the industries environmental licences for effluent and emissions is also the responsibility of the laboratory. Licence exceedance leads to heavy fines and continual exceedance would result in plant closure. The mining industry relies heavily on laboratories to certify that the material meets the customer specification. The large tonnages involved means that small errors in composition can result in losses amounting to many thousands of dollars. Copyright (1999) Australian X-ray Analytical Association Inc

Industry evolution in developing countries : the Indonesian pulp and paper industry

NARCIS (Netherlands)

Dijk, van M.

2003-01-01

Almost all empirical research on industry evolution has been conducted on high or medium technology industries in industrialised countries. In this paper, a detailed analysis of the life cycle of Indonesia's pulp and paper industry is presented as case study to investigate industry evolution in

Electrophoresis in the analysis of natural and industrial ob ects

International Nuclear Information System (INIS)

Stepanov, A.V.; Korchemnaya, E.K.

1979-01-01

Given is a brief review on practical application of electrophoresis in the analysis of natural and industrial objects. Suggested are expressiVe methods of thorium, uranium and rare earth elements separation in minerals by electrophoresis. The possibility of quantitative determination of rare earth elements in meteorites by the method of electromigration is shown. By means of electrophoresis identified are forms of radioruthenium in a sea water. Shown is the electrophoresis application for reactor loop water analysis, for environment contamination study, for determination of some rare earth yield in reactions of uranium fission by heavy ions

Ecological network analysis for carbon metabolism of eco-industrial parks: a case study of a typical eco-industrial park in Beijing.

Science.gov (United States)

Lu, Yi; Chen, Bin; Feng, Kuishuang; Hubacek, Klaus

2015-06-16

Energy production and industrial processes are crucial economic sectors accounting for about 62% of greenhouse gas (GHG) emissions globally in 2012. Eco-industrial parks are practical attempts to mitigate GHG emissions through cooperation among businesses and the local community in order to reduce waste and pollution, efficiently share resources, and help with the pursuit of sustainable development. This work developed a framework based on ecological network analysis to trace carbon metabolic processes in eco-industrial parks and applied it to a typical eco-industrial park in Beijing. Our findings show that the entire metabolic system is dominated by supply of primary goods from the external environment and final demand. The more carbon flows through a sector, the more influence it would exert upon the whole system. External environment and energy providers are the most active and dominating part of the carbon metabolic system, which should be the first target to mitigate emissions by increasing efficiencies. The carbon metabolism of the eco-industrial park can be seen as an evolutionary system with high levels of efficiency, but this may come at the expense of larger levels of resilience. This work may provide a useful modeling framework for low-carbon design and management of industrial parks.

The case study of energy flow analysis and strategy in pulp and paper industry

International Nuclear Information System (INIS)

Chen, Hua-Wei; Hsu, Chung-Hsuan; Hong, Gui-Bing

2012-01-01

The pulp and paper industry is a significant consumer of fossil energy in the Taiwanese manufacturing sector. The concentration of greenhouse gases (GHG) from manufacturing factory activities and vehicle emissions has increased remarkably. Notable energy savings can be achieved in the pulp and paper industry through energy flow analysis. The aim of this paper is to analyze the energy flow for three major energy consuming mills of the pulp and paper industry in Taiwan to make energy savings. In addition, potential technology options are examined for the capture of some of the energy that is currently lost in the processes and to identify the areas of energy saving potential that could have a large impact across more than one industry. The results of this study can serve as a benchmark for developing a quantified list in terms of energy savings potential and opportunities for improving the efficiency of the pulp and paper industry. - Highlights: ► The aim of this paper was to analyze the energy flow for three pulps and paper firms in Taiwan. ► The results were used as the basis for developing a quantified list in terms of energy savings potential. ► Energy flow analysis results can serve as benchmarks for the current pulp and paper making operations.

Changes in energy intensities of Thai industry between 1981 and 2000: a decomposition analysis

International Nuclear Information System (INIS)

Bhattacharyya, S.C.; Ussanarassamee, Arjaree

2005-01-01

Industrial demand accounts for about 30% of total final energy demand in Thailand, which experienced rapid increases in energy demand. This paper analyzes the changes in industrial energy intensities over a period of 20 years (1981-2000) and identifies the factors affecting the energy consumption using logarithmic mean Divisia decomposition technique. It is found that Thai industry has passed through four different phases of growth and energy consumption has closely followed the industrial growth pattern. Energy intensity of Thai industry decreased from 17.6 toe/million baht (constant 1988 prices) in 1981 to 15.8 toe/million baht (1988 prices) in 2000. Non-metallic mineral industry is the most intensive industry followed by basic metal, food and beverage, chemical and paper industries. The factor analysis indicates that both the structural effect and intensity effect contributed to a decline of aggregate intensity by 8% during 1981-1986 but in the rest of the periods, the two effects acted in opposite directions and thereby reducing the overall effect on aggregate intensity. Food and beverages, non-metallic mineral and chemical industries had significantly influenced the changes in aggregate intensity at sectoral level

The Implementation of Corporate Sustainability in the European Automotive Industry: An Analysis of Sustainability Reports

Directory of Open Access Journals (Sweden)

Martina Sukitsch

2015-08-01

Full Text Available The acceptance of corporate sustainability implementation and sustainability reporting has continued to grow steadily in recent years. This is particularly true for companies in the automotive industry. Increasing regulatory demands, for example, with respect to CO2 emissions, are one clear reason for this. In this paper the sustainability reports of 14 manufacturers in the European automotive industry are analyzed with respect to issues of corporate sustainability implementation. This entails content analysis of sustainability reports from 2012, and of their earliest available equivalents. The analysis of corporate sustainability implementation in the selected companies is provided with the purpose to help understand how manufacturers in the European automotive industry implement corporate sustainability. Results confirm the importance of specific policy instruments in implementation, such as the use of environmental management systems and standards, and of related changes in organizational structures. The latter include suitable adaptation of corporate strategy, philosophy, objectives, measures, and activities, as well as the need to integrate stakeholders in the adjustment process. The analysis shows that while companies are well-aware of the significance of sustainability for their industry, some tend to be leaders, and others laggards, as far as implementation is concerned.

The long-term memory analysis of industrial indices of the Chinese stock market

International Nuclear Information System (INIS)

Yong, L

2008-01-01

The main work of this paper is to apply the fractional market theory and time series analysis for analyzing various industrial indices of the Chinese stock market by rescaling range analysis. Hurst index and the long-term memory of price change in Chinese stock market are studied

Establishing strategic energy assessment indicators for Zimbabwe: A key to improving electrical energy efficiency

Science.gov (United States)

Goto, Felix

In Zimbabwe, there is still very little realization of the potential of demand side management (DSM) to increase industrial energy efficiency. Without clear guidelines that indicate the most economic energy efficiency strategies to implement, it is difficult for industry to easily evaluate the benefits of energy assessments. This research focused on establishing and evaluating indicators that guide correct implementation of energy assessments into Zimbabwean industry. This quantitative and qualitative study used a theoretic approach to develop indicators that identified industrial subsectors that should be targeted for DSM interventions. This may bring about reduction in energy demand in high power consuming Zimbabwean industrial companies, which were compared with energy utility performances of similar industrial companies in countries located in other parts of the world. This research used pattern-matching, categorical aggregation, and stochastic frontier regression analysis for data analysis. In maximizing electrical efficiency, the implications of this study may be used by individual companies in Zimbabwe to perform energy efficiency self-diagnoses, operational efficiency evaluations, and capital resource justifications. From a societal perspective, this study may benefit Zimbabwe because it provides opportunities for the alleviation of both shortages in power supply and the capital constraints of building new generating capacity. This study will also benefit ordinary Zimbabweans by lowering energy costs and providing reliable power. This promotes sustainable economic growth and lowers the need for foreign currency to import power.

Export and Economic Growth in the Case of the Manufacturing Industry: Panel Data Analysis of Developing Countries

Directory of Open Access Journals (Sweden)

Emine Kılavuz

2012-01-01

Full Text Available The correlation between growth in export and economic growth, which is called “Export-led Growth Hypothesis” in the literature, is still a current issue in both the theoretical and empirical literature. In the present study, the effect of different classifications of export and import on economic growth in 22 developing countries in the 1998–2006 period was tested based on two models, via panel data analysis. According to the results of the first model, the analysis of which included variables such as high and low-tech manufacturing industry exports, investment and population, it was found that only two variables, high-tech manufacturing industry export and investment, have a positive and significant effect on growth. In addition to the first model which included the analysis of all variables, the second model investigated the effect of high and low-tech manufacturing industry imports on growth. The findings revealed that only high-tech manufacturing industry export, investment and low-tech manufacturing industry import have a positive and significant effect on growth.

Applications of inorganic mass spectrometry in metal analysis of high-tech industry

International Nuclear Information System (INIS)

Ling Yongjian; Wang Shimin; Li Peiling; Chen Lizhen

2007-01-01

The metals in the nature are closely related to the progress of human culture and economic activities. Various kinds of metals are continuously being applied to new processes and products. During the effect by biogeochemical cycle, metals were released to environmental compartments, such as air, water, soil, and living organisms. The deficiency in knowledge, poor management, greedy, and bad intention usually leads to serious environmental pollution, eco-environment damage, and human poisoning. Effective analysis of metal concentrations and species during economic activities and eco-environment is an important research and survey subject. Internationally, the establishment of high-tech industrial park has become the major means to simultaneously improve living quality and broaden economic activity. High-tech industry uses metals. It is mandatory to control the distribution of metals in feed, process, product, waste, environment, and the life-cycle. This report is based on our experience with inorganic mass spectrometry focusing on the use of secondary ion mass spectrometry (SIMS) and inductively-coupled mass spectrometry (ICP-MS) in metal analysis of high-tech industrial parts. The report includes (1) The use of SIMS for analyzing impurity in depth and on surface demonstrates the importance of integrating trace metal, depth profile, micro-area, and surface analyses. (2) Survey ambient heavy metals (As, Be, Cd, Dr, Hg, Mn, Ni and Pb) around industrial parks and compare the findings to stack heavy metals. The results demonstrate that ICP-MS is indispensable to help reveal heavy metal distribution in industrial park ambient air and clarify suspected polluting sources. (3) Research and develop analytical method to determine metal impurities (Na, K, Mg, Ca, Cu, Fe, Mn, Li and Al) in photoresist. The method uses a novel nitric acid digestion technique to convert photoresist into carbon dioxide and water, followed by ICP-MS analysis of high-purity nitric acid recovery

Spatial econometric analysis of China’s province-level industrial carbon productivity and its influencing factors

International Nuclear Information System (INIS)

Long, Ruyin; Shao, Tianxiang; Chen, Hong

2016-01-01

Highlights: • We evaluate the industrial carbon productivity of China’s provinces. • The regional disparity and clustering features exist simultaneously. • There is evident spatial dependence in regional industrial carbon productivity. • We employ spatial panel data models to examine the impact factors. • Spatial effects are found to be important in understanding industrial CO_2 emissions. - Abstract: This study measured the industrial carbon productivity of 30 provinces in China from 2005 to 2012 and examined the space–time characteristics and the main factors of China’s industrial carbon productivity using Moran’s I index and spatial panel data models. The empirical results indicate that there is significant positive spatial dependence and clustering characteristics in China’s province-level industrial carbon productivity. The spatial dependence may create biased estimated parameters in an ordinary least squares framework; according to the analysis of our spatial panel models, industrial energy efficiency, the opening degree, technological progress, and the industrial scale structure have significantly positive effects on industrial carbon productivity whereas per-capita GDP, the industrial energy consumption structure, and the industrial ownership structure exert a negative effect on industrial carbon productivity.

Opening of material analysis beamline (BL-5) at NewSUBARU for industrial enterprises

International Nuclear Information System (INIS)

Hasegawa, Takayuki; Uemura, Masaharu; Tsurui, Takafumi; Shimizu, Masayoshi; Amemiya, Kenta; Fukushima, Sei; Ohta, Toshiaki; Motoyama, Muneyuki; Kanda, Kazuhiro

2010-01-01

A material analysis beamline for the industrial enterprises' use was completed at BL-5 of NewSUBARU synchrotron radiation facility in University of Hyogo in March 2008. BL-5 consists of two branch lines, one is a double crystal monochromator beamline (BL-5A) for the use in the higher-energy region (1300-4000 eV) and the other is a varied line spacing plane grating (VLSPG) monochromator beamline (BL-5B) for the use in the lower-energy region (50-1300 eV). These two branch lines can be operated simultaneously. BL-5 covers the soft X-ray region from 50 to 4000 eV and X-ray absorption spectrum can be measured with a high-energy resolution. The XAFS measurements in the total electron yield (TEY) and fluorescence yield (FLY) can be performed at BL-5A and BL-5B. In addition, the XPS spectra can be measured at BL-5B. BL-5 will be managed and maintained by the Synchrotron Analysis L.L.C. (SALLC), which is composed of the industrial companies, in cooperation with the staffs of the Laboratory of Advanced Science and Technology for Industry in University of Hyogo. Industrial users can be assisted by staffs of SALLC in the measurement at BL-5. (author)

Analysis of curricular aspects of economics' teaching in industrial engineering courses

Directory of Open Access Journals (Sweden)

Antonio Marcos Rodrigues e Silva

2012-06-01

Full Text Available Industrial Engineering is a field that has attracted the attention, especially because of its synergy with other areas of knowledge. In order to think about education in Industrial Engineering it is necessary to consider its relationship and interdependence with other areas. In this way, the relationship with Economics is considered. Although the objectives of both areas and their methods are distinct, they are related in many points. So, the contribution of study economy is directly related to the ways these topics will be studied in the Industrial Engineering courses. It is also implied how these topics will be chosen to be presented. The present paper’s objective is to analyze the teaching of Economics in the Industrial Engineering courses inBrazil. In order to achieve this objective, a documental research has been conducted, using the Content Analysis technique applied to the Teaching Plans of the disciplines covering the Economics contents in 15 Institutions. It has been concluded that the topics covered in the courses are of a broad nature, with emphasis in theoretic content of Economics. Furthermore, the strategies used in classroom, as well as the assessment methods are still of traditional nature.

WHERE IS THE VALUE IN GREENING YOUR BRAND? AN ANALYSIS OF THE CANADIAN HOTEL INDUSTRY

OpenAIRE

Bedlington, Emma

2009-01-01

This paper assesses the potential for a green hotel brand in the Canadian market, given the current industry trend towards environmentally friendly operations. To begin, an industry analysis of the competitive landscape is performed with a focus on the luxury hotel segment. A discussion of the key players in the Canadian market provides further context. The paper continues by analyzing the consumer decision process within the hotel industry, in conjunction with green consumer behaviour. Final...

A review of the evolution of human reliability analysis methods at nuclear industry

International Nuclear Information System (INIS)

Oliveira, Lécio N. de; Santos, Isaac José A. Luquetti dos; Carvalho, Paulo V.R.

2017-01-01

This paper reviews the status of researches on the application of human reliability analysis methods at nuclear industry and its evolution along the years. Human reliability analysis (HRA) is one of the elements used in Probabilistic Safety Analysis (PSA) and is performed as part of PSAs to quantify the likelihood that people will fail to take action, such as errors of omission and errors of commission. Although HRA may be used at lots of areas, the focus of this paper is to review the applicability of HRA methods along the years at nuclear industry, especially in Nuclear Power Plants (NPP). An electronic search on CAPES Portal of Journals (A bibliographic database) was performed. This literature review covers original papers published since the first generation of HRA methods until the ones published on March 2017. A total of 94 papers were retrieved by the initial search and 13 were selected to be fully reviewed and for data extraction after the application of inclusion and exclusion criteria, quality and suitability evaluation according to applicability at nuclear industry. Results point out that the methods from first generation are more used in practice than methods from second generation. This occurs because it is more concentrated towards quantification, in terms of success or failure of human action what make them useful for quantitative risk assessment to PSA. Although the second generation considers context and error of commission in human error prediction, they are not wider used in practice at nuclear industry to PSA. (author)

A review of the evolution of human reliability analysis methods at nuclear industry

Energy Technology Data Exchange (ETDEWEB)

Oliveira, Lécio N. de; Santos, Isaac José A. Luquetti dos; Carvalho, Paulo V.R., E-mail: lecionoliveira@gmail.com, E-mail: luquetti@ien.gov.br, E-mail: paulov@ien.gov.br [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

2017-11-01

This paper reviews the status of researches on the application of human reliability analysis methods at nuclear industry and its evolution along the years. Human reliability analysis (HRA) is one of the elements used in Probabilistic Safety Analysis (PSA) and is performed as part of PSAs to quantify the likelihood that people will fail to take action, such as errors of omission and errors of commission. Although HRA may be used at lots of areas, the focus of this paper is to review the applicability of HRA methods along the years at nuclear industry, especially in Nuclear Power Plants (NPP). An electronic search on CAPES Portal of Journals (A bibliographic database) was performed. This literature review covers original papers published since the first generation of HRA methods until the ones published on March 2017. A total of 94 papers were retrieved by the initial search and 13 were selected to be fully reviewed and for data extraction after the application of inclusion and exclusion criteria, quality and suitability evaluation according to applicability at nuclear industry. Results point out that the methods from first generation are more used in practice than methods from second generation. This occurs because it is more concentrated towards quantification, in terms of success or failure of human action what make them useful for quantitative risk assessment to PSA. Although the second generation considers context and error of commission in human error prediction, they are not wider used in practice at nuclear industry to PSA. (author)

Methodology for national risk analysis and prioritization of toxic industrial chemicals.

Science.gov (United States)

Taxell, Piia; Engström, Kerstin; Tuovila, Juha; Söderström, Martin; Kiljunen, Harri; Vanninen, Paula; Santonen, Tiina

2013-01-01

The identification of chemicals that pose the greatest threat to human health from incidental releases is a cornerstone in public health preparedness for chemical threats. The present study developed and applied a methodology for the risk analysis and prioritization of industrial chemicals to identify the most significant chemicals that pose a threat to public health in Finland. The prioritization criteria included acute and chronic health hazards, physicochemical and environmental hazards, national production and use quantities, the physicochemical properties of the substances, and the history of substance-related incidents. The presented methodology enabled a systematic review and prioritization of industrial chemicals for the purpose of national public health preparedness for chemical incidents.

Ergonomic Analysis of Garment Industry using Posture Evaluation Index (PEI in Virtual Environment

Directory of Open Access Journals (Sweden)

Erlinda Muslim

2011-09-01

Full Text Available This research tried to study, in a virtual environment, the ergonomics of four divisions in garment industry: cutting division, sewing division, button division, and finishing division. Variables that influence the working conditions in each division are different; depend on the real situations that happened. The purpose is to assess the real working conditions based on ergonomics  study  using Posture Evaluation Index (PEI. PEI integrates  the scores of  low back analysis (LBA, ovako working  posture  (OWAS,  and  rapid  upper  limb assessment  (RULA.  Analysis  phase  was  done  using  digital  human model  in  virtual  environment  that  available  on  Jack  6.0.  The  results show  that  the  working  conditions  in  garment industry had enough amount of risk that can injured the musculoskeletal system of the workers. This research enriches the  body  of  ergonomics  knowledge  in Indonesia  because  it  is  the  first  research  in  Indonesia that  applied  virtual environment approach to ergonomics analysis in industry.

Experience gained upon industrial application of on-line activation analysis in flotation

International Nuclear Information System (INIS)

Braun, H.; Riffel, F.

1979-01-01

At the Karlsruhe Nuclear Research Center an anlyzer was developed which allows continuous evaluation of the valuable minerals content in process streams. Experience is reported which has been gathered in several weeks of industrial application in a fluorspar flotation plant, the first industrial scale application of on-line activation analysis in Europe. The use has shown that with the equipment presented on-line monitoring with the desired accuracy is possible of all the strategically important points. This is of considerable importance for the economy of the process. (orig.) [de

Spanish mining in the 2008-09; La mineria espanola 2008-09

Energy Technology Data Exchange (ETDEWEB)

Espi, J. A.; Sanz Contreras, J. L.

2009-07-01

The year 2008 and early 2009 has been for the Spanish mining a period of enormous significance. The world in crisis has an impact, however, differently in sub-sectors where the mineral industry is divided. Thus, those most directly linked to the construction industry (aggregates, dimension stone and industrial minerals) have collapsed the demand for their products. However, despite moments of uncertainty ending last year, solid fossil fuels and metal ores in general are between hope and lack of knowledge in the coming months. In this way, now we should be pleased to have four metal mines, at least some of them with real interest. (Author)

Spanish mining in the 2008-09

International Nuclear Information System (INIS)

Espi, J. A.; Sanz Contreras, J. L.

2009-01-01

The year 2008 and early 2009 has been for the Spanish mining a period of enormous significance. The world in crisis has an impact, however, differently in sub-sectors where the mineral industry is divided. Thus, those most directly linked to the construction industry (aggregates, dimension stone and industrial minerals) have collapsed the demand for their products. However, despite moments of uncertainty ending last year, solid fossil fuels and metal ores in general are between hope and lack of knowledge in the coming months. In this way, now we should be pleased to have four metal mines, at least some of them with real interest. (Author)

Process Integration Analysis of an Industrial Hydrogen Production Process

OpenAIRE

Stolten, Detlef; Grube, Thomas; Tock, Laurence; Maréchal, François; Metzger, Christian; Arpentinier, Philippe

2010-01-01

The energy efficiency of an industrial hydrogen production process using steam methane reforming (SMR) combined with the water gas shift reaction (WGS) is analyzed using process integration techniques based on heat cascade calculation and pinch analysis with the aim of identifying potential measures to enhance the process performance. The challenge is to satisfy the high temperature heat demand of the SMR reaction by minimizing the consumption of natural gas to feed the combustion and to expl...

The Analysis Of Factors Affect The Quality Of Competitive Strategy In Industry SME For Embroidery At Padang City

Directory of Open Access Journals (Sweden)

dahliana kamener dahlia

2016-10-01

Full Text Available The study aimed to analyze the quality factors of competitive strategy on SME for Industrial embroidery in Padang city. With this research is expected to provide benefits to the industry, especially SMEs Industrial embroidery to be able to improve and consider the factors that can affect the quality of competitive strategy in this industry, which the factors influenced such as Quality Strategic Asset, Environment Adabtability and price strategic to the Quality Strategic Competition. The populations of this study were SME industry for the embroidery product in the city of Padang and used census sampling. Data retrieved from the primary data by spreading questionnaires and the measurement by using a Likert scale. Methods of analysis by using descriptive analysis, multiple regression analysis to test the hyphotheses. The result showed that the quality of asset strategik was postively significant effect the Quality Strategic Competition, and enviromental adaptability and price strategy have positively not significant effect on the Quality Strategic Competition.

Biogas production supported by excess heat – A systems analysis within the food industry

International Nuclear Information System (INIS)

Broberg Viklund, Sarah; Lindkvist, Emma

2015-01-01

Highlights: • A systems analysis when moving from external to internal production and use of biogas at an industry. • The aim is to study the impacts on greenhouse gas emissions and economics from this switch. • The study compares the choice of using biogas or industrial excess heat to heat the digester. • Internal biogas production supported by excess heat has environmental and economic benefits. - Abstract: The aim of this paper was to study the effects on greenhouse gases and economics when a change is made in the use of industrial organic waste from external production and use of biogas (A) to internal production and use (B). The two different system solutions are studied through a systems analysis based on an industrial case. The baseline system (A) and a modified system (B) were compared and analysed. Studies show that industrial processes considered as integrated systems, including the exchange of resources between industries, can result in competitive advantages. This study focuses on the integration of internally produced biogas from food industry waste produced by a food company and the use of excess heat. Two alternative scenarios were studied: (1) the use of available excess heat to heat the biogas digester and (2) the use of a part of the biogas produced to heat the biogas digester. This study showed that the system solution, whereby excess heat rather than biogas is used to heat the biogas digester, was both environmentally and economically advantageous. However, the valuation of biomass affects the magnitude of the emissions reduction. Implementing this synergistic concept will contribute to the reaching of European Union climate targets

Viability analysis of heat recovery solution for industrial process of roasting coffee

Directory of Open Access Journals (Sweden)

Kljajić Miroslav V.

2016-01-01

Full Text Available Every industrial heat recovery solution is specific engineering challenge but not because predicted energy rationalization or achieved energy savings but potential unavoidable technological deviations and consequences on related processes and for sure, high investment because of delicate design and construction. Often, the energy savings in a particular segment of the industrial process is a main goal. However, in the food industry, especially roasting coffee, additional criteria has to be strictly observed and fulfilled. Such criteria may include prescribed and uniform product quality, compliance with food safety standards, stability of the processes etc., and all in the presence of key process parameters variability, inconsistency of raw material composition and quality, complexity of measurement and analytical methods etc. The paper respects all circumstances and checks viability of proposed recovery solution. The paper analyzes the possibility of using waste heat from the roasting process to ensure shortening of roasting cycle, reduction of fuel consumption and increasing capacity of roasting lines on daily basis. Analysis concludes that effects are valuable and substantial, although the complete solution is on the threshold of economic sustainability with numerous opportunities to improve of both technical and economic indicators. The analysis combines measuring and analytical methods with standard cost-benefit analysis. Conclusions are derived from measurements and calculations of key parameters in the operating conditions and checked by experimental methods. Test results deviate from 10 to 15%, in relation with parameters in main production line.

Analysis on Japanese nuclear industrial technologies and their military implications

Energy Technology Data Exchange (ETDEWEB)

Kim, H S; Yang, M H; Kim, H J. and others

2000-10-01

This study covered the following scopes : analysis of Japan's policy trend on the development and utilization of nuclear energy, international and domestic viewpoint of Japan's nuclear weapon capability, Japan's foreign affairs and international cooperation, status of Japan's nuclear technology development and its level, status and level of nuclear core technologies such as nuclear reactor and related fuel cycle technologies. Japan secures the whole spectrum of nuclear technologies including core technologies through the active implementation of nuclear policy for the peaceful uses of nuclear energy during the past five decades. Futhermore, as the result of the active cultivation of nuclear industry, Japan has most nuclear-related facilities and highly advanced nuclear industrial technologies. Therefore, it is reasonable that Japan might be recognized as one of countries having capability to get nuclear capability in several months.

Analysis on Japanese nuclear industrial technologies and their military implications

International Nuclear Information System (INIS)

Kim, H. S.; Yang, M. H.; Kim, H. J. and others

2000-10-01

This study covered the following scopes : analysis of Japan's policy trend on the development and utilization of nuclear energy, international and domestic viewpoint of Japan's nuclear weapon capability, Japan's foreign affairs and international cooperation, status of Japan's nuclear technology development and its level, status and level of nuclear core technologies such as nuclear reactor and related fuel cycle technologies. Japan secures the whole spectrum of nuclear technologies including core technologies through the active implementation of nuclear policy for the peaceful uses of nuclear energy during the past five decades. Futhermore, as the result of the active cultivation of nuclear industry, Japan has most nuclear-related facilities and highly advanced nuclear industrial technologies. Therefore, it is reasonable that Japan might be recognized as one of countries having capability to get nuclear capability in several months

Dynamic analysis of an industrial structure with fluid-structure interaction

International Nuclear Information System (INIS)

Sigrist, J.F.

2006-01-01

The present paper deals with the dynamic analysis of a nuclear reactor subjected to a shock loading with fluid-structure interaction modeling. The general framework of the study is that of linear vibrations, which are investigated for coupled fluid-structure problems. From a methodological point of view, energy deformation and modal mass calculation are exposed for elasto-acoustic systems. From an industrial point of view, the influence of elasto-acoustic coupling effects are highlighted for the studied structure. The dynamic analysis of the coupled system is carried out with various procedures (static, spectral and temporal methods), which are exposed and compared. As a general result, the spectral method is proved to be the most effective for the industrial problem. From the numerical point of view, the discretization procedure is based on a finite element method for the coupled problem, using a displacement and pressure-displacement potential coupled formulation with axi-symmetric representation of the problem unknowns. A finite element code is developed within MATLAB for the specific study, the numerical calculations presented in the paper are used as reference test cases for integration of the (u,p,φ) formulation in the commercial finite element code Ansys. (author)

Study on eco-efficiency of industrial parks in China based on data envelopment analysis.

Science.gov (United States)

Fan, Yupeng; Bai, Bingyang; Qiao, Qi; Kang, Peng; Zhang, Yue; Guo, Jing

2017-05-01

China's industrial parks have been playing a crucial role on driving regional economy development, but also been posing threats to local environment due to intensive resource consumption and waste emission. Chinese government facilitated eco-industrial development of industrial park, aiming to output more with less environmental burden. In our study, the eco-efficiency levels of 40 Chinese industrial parks in 2012 were assessed and ranked by Data Envelopment Analysis (DEA). This paper applied indicators relevant to resource, economy, and environment from industrial parks which can well reflect the characteristics of eco-efficiency conforming to the concept of sustainability. This paper introduced how to adjust less sustainable parks to be more sustainable according to the DEA results. The roles of industrial added value per capita, industrial structure, environmental policy and development scale as influence factors of eco-efficiency were discussed. The results show that large differences exist in the eco-efficiency of different industrial parks. It is shown that 20% of the parks are relatively efficient. 47% of the study parks being inefficient in terms of scale efficiency show decreasing returns to scale. Policy implementations for the management of industrial parks were also discussed based on the results. Copyright © 2017 Elsevier Ltd. All rights reserved.

A Systematic Analysis of Functional Safety Certification Practices in Industrial Robot Software Development

Directory of Open Access Journals (Sweden)

Tong Xie

2017-01-01

Full Text Available For decades, industry robotics have delivered on the promise of speed, efficiency and productivity. The last several years have seen a sharp resurgence in the orders of industrial robots in China, and the areas addressed within industrial robotics has extended into safety-critical domains. However, safety standards have not yet been implemented widely in academia and engineering applications, particularly in robot software development. This paper presents a systematic analysis of functional safety certification practices in software development for the safety-critical software of industrial robots, to identify the safety certification practices used for the development of industrial robots in China and how these practices comply with the safety standard requirements. Reviewing from Chinese academic papers, our research shows that safety standards are barely used in software development of industrial robot. The majority of the papers propose various solutions to achieve safety, but only about two thirds of the papers refer to non-standardized approaches that mainly address the systematic level rather than the software development level. In addition, our research shows that with the development of artificial intelligent, an emerging field is still on the quest for standardized and suitable approaches to develop safety-critical software.

Flow cytometric analysis of microbial contamination in food industry technological lines--initial study.

Science.gov (United States)

Józwa, Wojciech; Czaczyk, Katarzyna

2012-04-02

Flow cytometry constitutes an alternative for traditional methods of microorganisms identification and analysis, including methods requiring cultivation step. It enables the detection of pathogens and other microorganisms contaminants without the need to culture microbial cells meaning that the sample (water, waste or food e.g. milk, wine, beer) may be analysed directly. This leads to a significant reduction of time required for analysis allowing monitoring of production processes and immediate reaction in case of contamination or any disruption occurs. Apart from the analysis of raw materials or products on different stages of manufacturing process, the flow cytometry seems to constitute an ideal tool for the assessment of microbial contamination on the surface of technological lines. In the present work samples comprising smears from 3 different surfaces of technological lines from fruit and vegetable processing company from Greater Poland were analysed directly with flow cytometer. The measured parameters were forward and side scatter of laser light signals allowing the estimation of microbial cell contents in each sample. Flow cytometric analysis of the surface of food industry production lines enable the preliminary evaluation of microbial contamination within few minutes from the moment of sample arrival without the need of sample pretreatment. The presented method of fl ow cytometric initial evaluation of microbial state of food industry technological lines demonstrated its potential for developing a robust, routine method for the rapid and labor-saving detection of microbial contamination in food industry.

Risk analysis in the chemical industry; Analisis de riesgos en la industria quimica

Energy Technology Data Exchange (ETDEWEB)

Rea Soto, Rogelio; Sandoval Valenzuela, Salvador [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

2000-07-01

The Instituto de Investigaciones Electricas has a group of risk analysis (GAR), specialized in the most advanced methodologies to apply them in diverse industries of the productive sector, such as the nuclear, the oil and the chemical industries. In this work the integrated methodology that the GAR uses to make risk analysis in the chemical and oil industries is described. These analyses have as an objective to make a meticulous evaluation of the system design, the operation practices, the maintenance and inspection policies and the emergency plans. [Spanish] El Instituto de Investigaciones Electricas cuenta con un grupo de analisis de riesgo (GAR), especializado en las metodologias mas avanzadas para aplicarlas en diversas industrias del sector productivo, como lo son la nuclear, la petrolera y la quimica. En este trabajo se describe la metodologia integrada que el GAR utiliza para realizar analisis de riesgos en las industrias quimica y petrolera. Estos analisis tienen como objetivo realizar una minuciosa evaluacion del diseno del sistema, las practicas de operacion, las politicas de mantenimiento e inspeccion y los planes de emergencia.

Project for the completion of a probabilistic safety analysis of an industrial irradiation

International Nuclear Information System (INIS)

Ferro, R.; Troncoso, M.

1995-01-01

The probabilistic safety analysis is a very valuable instrument in safety studies of facilities with potential risk for the personnel, population and environment. One of the possible field of use of PSA techniques in the safety studies for industrial irradiation where serious accidents have occurred. For this reason a project has been undertaken to carry out the PSA in the Irradiation Plant of Research Institute of the Food Industry, which complements the safety studies of this facility

Fuel demand and fuel efficiency in the US commercial-airline industry and the trucking industry: an analysis of trends and implications. Final report

Energy Technology Data Exchange (ETDEWEB)

1982-03-31

A study of trends in fuel use and efficiency in the US commercial airlines industry is extended back to 1967 in order to compare the relative contributions of the factors influencing efficiency during a period of stable fuel prices (1967 to 1972) versus a period of fuel price growth (1973 to 1980). A similar analysis disaggregates the components of truck efficiency and evaluates their relative impact on fuel consumption in the trucking industry. (LEW)

Cost Benefit Analysis of Khaddar Industry: a Study on Comilla District

OpenAIRE

Shamimul Islam; Rafia Islam Lina

2015-01-01

The study tries to findout the Cost Benefit Analysis (CBA) of Khaddar industry. Comilla district is considered as the study area. Sample is selected purposively based on the stablishment available within the district. The collected data is analysed by using Microsoft Office Excel 2007 to calculate different statistical values used in this paper. All the possible techniques of Cost Benefit analysis are employed. The findings suggest that, in both the cases i.e., in case of Hand Loom as well as...

Nanotechnology patents in the automotive industry (a quantitative & qualitative analysis).

Science.gov (United States)

Prasad, Raghavendra; Bandyopadhyay, Tapas K

2014-01-01

The aim of the article is to present a trend in patent filings for application of nanotechnology to the automobile sector across the world, using the keyword-based patent search. Overviews of the patents related to nano technology in the automobile industry have been provided. The current work has started from the worldwide patent search to find the patents on nanotechnology in the automobile industry and classify the patents according to the various parts of an automobile to which they are related and the solutions which they are providing. In the next step various graphs have been produced to get an insight into various trends. In next step, analysis of patents in various classifications, have been performed. The trends shown in graphs provide the quantitative analysis whereas; the qualitative analysis has been done in another section. The classifications of patents based on the solution they provide have been performed by reading the claims, titles, abstract and full texts separately. Patentability of nano technology inventions have been discussed in a view to give an idea of requirements and statutory bars to the patentability of nanotechnology inventions. Another objective of the current work is to suggest appropriate framework for the companies regarding use of nano technology in the automobile industry and a suggestive strategy for patenting of the inventions related to the same. For example, US Patent, with patent number US2008-019426A1 discusses the invention related to Lubricant composition. This patent has been studied and classified to fall under classification of automobile parts. After studying this patent, it is deduced that, the problem of friction in engine is being solved by this patent. One classification is the "automobile part" based while other is the basis of "problem being solved". Hence, two classifications, namely reduction in friction and engine were created. Similarly, after studying all the patents, a similar matrix has been created.

VALUE STREAM COST ANALYSIS IN THE ROMANIAN FOOTWEAR INDUSTRY

OpenAIRE

Dimi OFILEANU

2015-01-01

Once the Lean philosophy is developed and implemented to all levels in a company, a new accounting system appears: Lean accounting. Value Stream Cost Analysis is the main and the most powerful instrument of Lean accounting. Because of the fact that VSCA allows us to identify the company’s performance at the proper time, we can rapidly intervene to make the adjustments needed. The Romanian footwear industry is competitive worldwide (14th place in the top of exporters), but in order to improve,...

Accident consequence analysis models applied to licensing process of nuclear installations, radioactive and conventional industries

International Nuclear Information System (INIS)

Senne Junior, Murillo; Vasconcelos, Vanderley de; Jordao, Elizabete

2002-01-01

The industrial accidents happened in the last years, particularly in the eighty's decade, had contributed in a significant way to call the attention to government authorities, industry and society as a whole, demanding mechanisms for preventing episodes that could affect people's safety and environment quality. Techniques and methods already thoroughly used in the nuclear, aeronautic and war industries were then adapted for performing analysis and evaluation of the risks associated to other industrial activities, especially in the petroleum, chemistry and petrochemical areas. Some models for analyzing the consequences of accidents involving fire and explosion, used in the licensing processes of nuclear and radioactive facilities, are presented in this paper. These models have also application in the licensing of conventional industrial facilities. (author)

Area Handbook Series: Iraq: A Country Study

Science.gov (United States)

1988-05-01

also was killed after attempting to escape disguised as a veiled woman . In the ensuing mob demonstrations against the old order, angry crowds severely...the Mid- dle Ages. 86 The Society and Its Environment The Ottoman Empire organized society around the concept of the millet , or autonomous religious...major industry subsectors, such as spinning and weaving, chemicals, and engineering. Factory managers were given some autonomy, and an effort was made

Sustainability Assessment of the Natural Gas Industry in China Using Principal Component Analysis

Directory of Open Access Journals (Sweden)

Xiucheng Dong

2015-05-01

Full Text Available Under pressure toward carbon emission reduction and air protection, China has accelerated energy restructuring by greatly improving the supply and consumption of natural gas in recent years. However, several issues with the sustainable development of the natural gas industry in China still need in-depth discussion. Therefore, based on the fundamental ideas of sustainable development, industrial development theories and features of the natural gas industry, a sustainable development theory is proposed in this thesis. The theory consists of five parts: resource, market, enterprise, technology and policy. The five parts, which unite for mutual connection and promotion, push the gas industry’s development forward together. Furthermore, based on the theoretical structure, the Natural Gas Industry Sustainability Index in China is established and evaluated via the Principal Component Analysis (PCA method. Finally, a conclusion is reached: that the sustainability of the natural gas industry in China kept rising from 2008 to 2013, mainly benefiting from increasing supply and demand, the enhancement of enterprise profits, technological innovation, policy support and the optimization and reformation of the gas market.

ANALYSIS OF LABOR MARKET IN THE SECONDARY SECTOR ON ROMANIAN DEVELOPMENT REGIONS

Directory of Open Access Journals (Sweden)

Cristina\tALPOPI

2015-12-01

Full Text Available In this paper we analyze and highlight the evolution of workforce engaged in the secondary sector. We determined too the unemployment rate distribution, which is coupled with the decline of industry and constructions and there are identified zones and cities affected by major rising unemployment. The increase of unemployed number in the secondary sector was primarily due to the decline of manufacturing industry and mining. At Bucharest and growth poles level, it shows that between the secondary sector branches: industry and construction, the most employees are engaged in the industrial sector, especially in manufacturing industries, although this sector ranks on the second place in order of preference. Most of the employees choose jobs into the tertiary sector. Regarding the distribution of the number of employees per industrial subsectors, it appears that most of them work in manufacturing, followed water supply and waste, then energy supply and a very small percentage in the mining. The activity sectors reveal that most employees are engaged in secondary and tertiary sectors, and then, in a very small proportion, in the primary sector. At regional poles level, the largest number of employees are engaged in industrial sector. In the construction sector, the number of employees is small. Counties associated of Bucharest metropolitan area recorded the greatest number of employees in construction. All analyzed territories recorded positive evolutions in the number of employees in 2011 compared to 2002. Counties associated of some metropolitan areas, including Bucharest, showed a positive trend, superior to other types of areas in 2011 compared to 2002. Compared to the situation in construction sector, the industry is characterized by a decrease of the number of employees in 2011 compared to 2002. Even in a general context characterized by instability in the industry, some types of analyzed areas showed a rising trend. In 2011, compared to 2006

Risk cognition as a new communication tool for high-tech industries. Comparative analysis between nuclear industry and biotechnology

International Nuclear Information System (INIS)

Steinhaeusler, F.; Wieland, P.

2000-01-01

Concerns of political decision makers, the media, and members of the public with regard to high-tech industries focus upon two main issues: safety and socio-economic impact. In this regard the nuclear industry and biotechnology, commonly associated as 'high risk and low trust situation', face the problems of the assessment of potentially dangerous or negative socio-economic consequences of very improbable risks and the communication with the various audiences. It is common for the national authorities in this case to conduct the process of quantified risk analysis (QRA). Unfortunately, hitherto the communication of the results obtained by QRA to the different non-scientific/non-technical target groups listed above is generally dissatisfactory, resulting in the frequent rejection of nuclear- and biotechnology. The main reason is that it has generally not been recognized that QRA is but the final step in the cognition of risk from both real as well as perceived hazards, preceded by risk estimation (RES) and risk evaluation (REV). RES is largely the scientific identification of hazards leading formally to the assessment of mechanisms of harmful consequences, and latterly to the assessment of the probability of its occurrence. Contrary to that, REV deals with the subjective judgment of the significance of assessed individual and societal risks. As such, REV involves individual cognitions of hazards and risks, such as perceptions, knowledge and understanding. In this paper the role of risk cognition in communicating issues associated with high-tech industrial activities, such as nuclear industry and biotechnology, is discussed. Common factors influencing risk perception are dealt with in a comparative manner in order to draw practically applicable lessons from it. This comparative analysis revealed the following results: (1)QRA-derived risk estimation measures used to quantify the risk from potential hazard associated with high-tech industries per se are not suitable

Study of the Utah uranium-milling industry. Volume I. A policy analysis

International Nuclear Information System (INIS)

Turley, R.E.

1980-05-01

This is the first volume of a two volume study of the Utah Uranium Milling Industry. The study was precipitated by a 1977 report issued by the Western Interstate Nuclear Board entitled Policy Recommendations on Financing Stabilization. Perpetual Surveillance and Maintenance of Uranium Mill Tailings. Volume I of this study is a policy analysis or technology assessment of the uranium milling industry in the state of Utah; specifically, the study addresses issues that deal with the perpetual surveillance, monitoring, and maintenance of uranium tailings piles at the end of uranium milling operations, i.e., following shutdown and decommissioning. Volume II of this report serves somewhat as an appendix. It represents a full description of the uranium industry in the state of Utah, including its history and statements regarding its future. The topics covered in volume I are as follows: today's uranium industry in Utah; management of the industry's characteristic nuclear radiation; uranium mill licensing and regulation; state licensing and regulation of uranium mills; forecast of future milling operations; policy needs relative to perpetual surveillance, monitoring, and maintenance of tailings; policy needs relative to perpetual oversight; economic aspects; state revenue from uranium; and summary with conclusions and recommendations. Appendices, figures and tables are also presented

SOVT analysis of the nuclear industry in Mexico; Analisis FODA de la industria nuclear en Mexico

Energy Technology Data Exchange (ETDEWEB)

Fernandez R, E.; Hernandez B, M. C., E-mail: edelmiraf@yahoo.com [Instituto Tecnologico de Toluca, Division de Estudios de Posgrado, Av. Instituto Tecnologico s/n, Ex-rancho La Virgen, 52140 Metepec, Estado de Mexico (Mexico)

2011-11-15

In this work the analysis of strengths, opportunities, vulnerabilities and threats (SOVT) of the nuclear industry in Mexico is presented. This industry presents among its strengths that Mexico is a highly electrified country and has a good established normative mark of nuclear security. Although the Secretaria de Energia in Mexico, with base to the exposed in the Programa Sectorial de Energia 2007-2012, is analyzing the convenience of the generation starting from this source, considering the strong technological dependence of the exterior and the limited federal budget dedicated to this field. As a result of the analysis of the SOVT matrix, were found a great number of strengths that threats, although the vulnerabilities list is major to the strengths, the opportunities list is the bigger. Therefore, the nuclear industry can be a sustainable industry, taking the necessary decisions and taking advantage of the detected opportunities. (Author)

Forecasting global developments in the basic chemical industry for environmental policy analysis

NARCIS (Netherlands)

Broeren, M.L.M.|info:eu-repo/dai/nl/371687438; Saygin, D.; Patel, M.K.

The chemical sector is the largest industrial energy user, but detailed analysis of its energy use developments lags behind other energy-intensive sectors. A cost-driven forecasting model for basic chemicals production is developed, accounting for regional production costs, demand growth and stock

Relative risk analysis of several manufactured nanomaterials: an insurance industry context.

Science.gov (United States)

Robichaud, Christine Ogilvie; Tanzil, Dicksen; Weilenmann, Ulrich; Wiesner, Mark R

2005-11-15

A relative risk assessment is presented for the industrial fabrication of several nanomaterials. The production processes for five nanomaterials were selected for this analysis, based on their current or near-term potential for large-scale production and commercialization: single-walled carbon nanotubes, bucky balls (C60), one variety of quantum dots, alumoxane nanoparticles, and nano-titanium dioxide. The assessment focused on the activities surrounding the fabrication of nanomaterials, exclusive of any impacts or risks with the nanomaterials themselves. A representative synthesis method was selected for each nanomaterial based on its potential for scaleup. A list of input materials, output materials, and waste streams for each step of fabrication was developed and entered into a database that included key process characteristics such as temperature and pressure. The physical-chemical properties and quantities of the inventoried materials were used to assess relative risk based on factors such as volatility, carcinogenicity, flammability, toxicity, and persistence. These factors were first used to qualitatively rank risk, then combined using an actuarial protocol developed by the insurance industry for the purpose of calculating insurance premiums for chemical manufacturers. This protocol ranks three categories of risk relative to a 100 point scale (where 100 represents maximum risk): incident risk, normal operations risk, and latent contamination risk. Results from this analysis determined that relative environmental risk from manufacturing each of these five materials was comparatively low in relation to other common industrial manufacturing processes.

REGIONALIZATION AND INTRA-INDUSTRY TRADE. AN ANALYSIS OF AUTOMOBILE INDUSTRY TRADE IN NAFTA

OpenAIRE

Sylvie MONTOUT; Jean-Louis MUCCHIELLI; Soledad ZIGNAGO

2002-01-01

As was shown in some previous studies, the creation of the North American Free Trade American (NAFTA) has significantly increased trade and investment flows between member countries. Consequently, it seems appropriate to analyze the incidences of the free trade agreement on the nature of trade. In this paper, we study the intra-industry trade in the automobile industry within the NAFTA area. Our results highlight an increase in intra-industry trade since the beginning of the 1990s. The import...

Analysis on Japanese nuclear industrial technologies and their military implications

Energy Technology Data Exchange (ETDEWEB)

Kim, H. S.; Yang, M. H.; Kim, H. J. and others

2000-10-01

This study covered the following scopes : analysis of Japan's policy trend on the development and utilization of nuclear energy, international and domestic viewpoint of Japan's nuclear weapon capability, Japan's foreign affairs and international cooperation, status of Japan's nuclear technology development and its level, status and level of nuclear core technologies such as nuclear reactor and related fuel cycle technologies. Japan secures the whole spectrum of nuclear technologies including core technologies through the active implementation of nuclear policy for the peaceful uses of nuclear energy during the past five decades. Futhermore, as the result of the active cultivation of nuclear industry, Japan has most nuclear-related facilities and highly advanced nuclear industrial technologies. Therefore, it is reasonable that Japan might be recognized as one of countries having capability to get nuclear capability in several months.

The analysis of aspects of food industry competitiveness in Serbia

Directory of Open Access Journals (Sweden)

Bešić Cariša

2014-01-01

Full Text Available Competitive ability of the company in modern business conditions is difficult to achieve and easy to lose. The reason for this attitude is the fact that the rapid technological improvement enabled the technology with becoming available to everyone in the world under reasonable terms. Competitiveness of domestic companies is very low. Insufficient application of knowledge, low technological level of enterprises, unproductiveness and inefficiency are just part of the problem. Food industry in Serbia shares the fate of domestic economy - non-competitiveness is one of the main factors which affect the crisis in agricultural sector. The authors of this paper, based on the available national and international statistical data, have done analysis and display of competitive opportunities of domestic economy in general and in particular sectors of food industry. The authors also indicate the possibility of improving competitiveness.

Cost Benefit Analysis of Khaddar Industry: a Study on Comilla District

Directory of Open Access Journals (Sweden)

Shamimul Islam

2015-01-01

Full Text Available The study tries to findout the Cost Benefit Analysis (CBA of Khaddar industry. Comilla district is considered as the study area. Sample is selected purposively based on the stablishment available within the district. The collected data is analysed by using Microsoft Office Excel 2007 to calculate different statistical values used in this paper. All the possible techniques of Cost Benefit analysis are employed. The findings suggest that, in both the cases i.e., in case of Hand Loom as well as in case of Power Loom the expected return is very high. The value of Net Present Value (NPV, Benefit Cost Ratio (BCR and Internal Rate of Return (IRR suggest that, there is a very higher profitability in this sector. The IRR of the projects is 183 and 157 for Hand Loom and Power Loom respectively which is exceptionally very high. The higher value may due to low establishment costs and low maintenance costs for hand loom alternatively high productivity and comparatively lower operating costs for power loom industries.

Factor analysis of processes of corporate culture formation at industrial enterprises of Ukraine

Directory of Open Access Journals (Sweden)

Illiashenko Sergii

2016-06-01

Full Text Available Authors have analyzed and synthesized the features of formation and development of the corporate culture at industrial enterprises of Ukraine and on this basis developed recommendations for application in the management of strategic development. During the research authors used the following general scientific methods: at research of patterns of interaction national culture, corporate culture and the culture of the individual authors used logical generalization method; for determining factors influencing corporate culture formation with the level of occurrence authors used factor analysis; for trend analysis of the corporate culture development at appropriate levels authors used comparative method. Results of the analysis showed that macro- and microfactors are external and mezofaktors (adaptability of business and corporate governance, corporate ethics, corporate social responsibility and personnel policies, corporate finance are internal for an enterprise. Authors have identified areas for each of the factors, itemized obstacles to the establishment and development of corporate culture at Ukrainian industrial enterprises and proposed recommendations for these processes management.

Trace analysis in the food and beverage industry by capillary gas chromatography: system performance and maintenance.

Science.gov (United States)

Hayes, M A

1988-04-01

Gas chromatography (GC) is the most widely used analytical technique in the food and beverage industry. This paper addresses the problems of sample preparation and system maintenance to ensure the most sensitive, durable, and efficient results for trace analysis by GC in this industry.

Studies of world carbon fiber industry from a perspective of patent analysis

Institute of Scientific and Technical Information of China (English)

郑佳

2016-01-01

Patents are the manifestation of the industry R&D endeavor;therefore, World carbon fiber in-dustry from the perspective of patent analysis is studied .Findings from the analysis show a continual increase of carbon fibers patents since 1969 , and the growth rate began even faster after the year of 2005.Five countries (Japan, China, US, Germany and Korea) took dominant positions in global carbon fibers R&D , and the sum of patents applied in these five countries accounted for 80%of the total patents in the world .Corporations do play an active role in global carbon fibers R&D , and over 60%of patents were applied by corporations .Among them , the top 3 corporations were all from Ja-pan, which had much more patents than the other patent assignees .Furthermore, most corporations were not active in cooperation with others , except Toyota Motor Corp .Global carbon fibers R&D fo-cused on sheet manufacture cloth , core wire layer , heat connect provide and filter activated draw . And there is big difference between Japan and China in the R&D focus .China ’ s corporations have exhibited rapid growth in the number of patent applications in recent years , but there is still a large gap between China and foreign countries in view of global patent layout and influence .By providing the insight into the evolution of global carbon fibers industrial and technological development through the perspective of patent analysis , this study hopes to provide an objective statistic reference for fu-ture policy directions and academic researches .

Review of US ESCO industry market trends: an empirical analysis of project data

International Nuclear Information System (INIS)

Goldman, Charles A.; Hopper, Nicole C.; Osborn, Julie G.

2005-01-01

This comprehensive empirical analysis of US energy service company (ESCO) industry trends and performance employs two parallel analytical approaches: a survey of firms to estimate total industry size, and a database of ∼1500 ESCO projects, from which we report target markets and typical project characteristics, energy savings and customer economics. We estimate that industry investment for energy-efficiency related services reached US$2 billion in 2000 following a decade of strong growth. ESCO activity is concentrated in states with high economic activity and strong policy support. Typical projects save 150-200 MJ/m 2 /year and are cost-effective with median benefit/cost ratios of 1.6 and 2.1 for institutional and private sector projects. The median simple payback time (SPT) is 7 years among institutional customers; 3 years is typical in the private sector. Reliance on DSM incentives has decreased since 1995. Preliminary evidence suggests that state enabling policies have boosted the industry in medium-sized states. ESCOs have proven resilient in the face of restructuring and will probably shift toward selling 'energy solutions', with energy efficiency part of a package. We conclude that appropriate policy support - both financial and non-financial - can 'jump-start' a viable private-sector energy-efficiency services industry that targets large institutional and commercial/industrial customers

Review of US ESCO industry market trends: an empirical analysis of project data

International Nuclear Information System (INIS)

Goldman, C.A.; Hopper, N.C.; Osborn, J.G.

2005-01-01

This comprehensive empirical analysis of US energy service company (ESCO) industry trends and performance employs two parallel analytical approaches: a survey of firms to estimate total industry size, and a database of ∼1500 ESCO projects, from which we report target markets and typical project characteristics, energy savings and customer economics. We estimate that industry investment for energy-efficiency related services reached US$2 billion in 2000 following a decade of strong growth. ESCO activity is concentrated in states with high economic activity and strong policy support. Typical projects save 150-200 MJ/m 2 /year and are cost-effective with median benefit/cost ratios of 1.6 and 2.1 for institutional and private sector projects. The median simple payback time (SPT) is 7 years among institutional customers; 3 years is typical in the private sector. Reliance on DSM incentives has decreased since 1995. Preliminary evidence suggests that state enabling policies have boosted the industry in medium-sized states. ECSOs have proven resilient in the face of restructuring and will probably shift toward selling 'energy solutions', with energy efficiency part of a package. We conclude that appropriate policy support - both financial and non-financial - can 'jump-start' a viable private-sector energy-efficiency services industry that targets large institutional and commercial/industrial customers. (author)

An analysis of the organizational linkages in the cotton industry in Benin

NARCIS (Netherlands)

Sinzogan, A.A.C.; Jiggins, J.; Vodouhè, S.; Kossou, D.; Totin, G.G.E.; Huis, van A.

2007-01-01

A study of the institutional context of the cotton industry in Benin was conducted in 2004, based on an analysis of stakeholders' interests and influence. The impacts on innovation processes and production systems are analysed with respect to farmers' organizations, the research and extension system

Exploring the quality of life (QOL) in the Indian software industry: a public health viewpoint.

Science.gov (United States)

Jha, Ayan; Sadhukhan, Sanjoy Kumar; Velusamy, Saravanan; Banerjee, Gargi; Banerjee, Arpita; Saha, Amitava; Talukdar, Sumit

2012-04-01

Our objectives were to describe the QOL and its determinants among software professionals of Kolkata, and to compare the same according to information technology (IT) and IT-enabled services (ITeS) sub-sectors. An institution-based cross-sectional study was conducted among software professionals of Kolkata applying a two-stage stratified random sampling technique. The WHO QOL BREF questionnaire was administered along with a list of pertinent variables. Overall, the analysis for 338 software professionals (177 IT and 161 ITeS) clearly demonstrated significant differences between mean scores of these two sectors for each of the six outcome domains of WHO QOL BREF. Multilevel multivariate analysis outlined 13 significant predictors of QOL-four positive (age, regular fitness regimes, foreign placements and changing companies frequently) and the rest of the nine, negative (multiple sex partners, multiple addictions, extended working hours, night-shift duties, income, expenditure, carrying office work home, current illness and ITeS company type). Our study helps in obtaining a clear understanding of the multifaceted risk factors prevailing in this sector, the majority of which can be effectively addressed by specific health promotional interventions. A dedicated health policy is mandated at both government and company levels.

Industrial entrepreneurial network: Structural and functional analysis

Science.gov (United States)

Medvedeva, M. A.; Davletbaev, R. H.; Berg, D. B.; Nazarova, J. J.; Parusheva, S. S.

2016-12-01

Structure and functioning of two model industrial entrepreneurial networks are investigated in the present paper. One of these networks is forming when implementing an integrated project and consists of eight agents, which interact with each other and external environment. The other one is obtained from the municipal economy and is based on the set of the 12 real business entities. Analysis of the networks is carried out on the basis of the matrix of mutual payments aggregated over the certain time period. The matrix is created by the methods of experimental economics. Social Network Analysis (SNA) methods and instruments were used in the present research. The set of basic structural characteristics was investigated: set of quantitative parameters such as density, diameter, clustering coefficient, different kinds of centrality, and etc. They were compared with the random Bernoulli graphs of the corresponding size and density. Discovered variations of random and entrepreneurial networks structure are explained by the peculiarities of agents functioning in production network. Separately, were identified the closed exchange circuits (cyclically closed contours of graph) forming an autopoietic (self-replicating) network pattern. The purpose of the functional analysis was to identify the contribution of the autopoietic network pattern in its gross product. It was found that the magnitude of this contribution is more than 20%. Such value allows using of the complementary currency in order to stimulate economic activity of network agents.

Demand-driven water withdrawals by Chinese industry: a multi-regional input-output analysis

Science.gov (United States)

Zhang, Bo; Chen, Z. M.; Zeng, L.; Qiao, H.; Chen, B.

2016-03-01

With ever increasing water demands and the continuous intensification of water scarcity arising from China's industrialization, the country is struggling to harmonize its industrial development and water supply. This paper presents a systems analysis of water withdrawals by Chinese industry and investigates demand-driven industrial water uses embodied in final demand and interregional trade based on a multi-regional input-output model. In 2007, the Electric Power, Steam, and Hot Water Production and Supply sector ranks first in direct industrial water withdrawal (DWW), and Construction has the largest embodied industrial water use (EWU). Investment, consumption, and exports contribute to 34.6%, 33.3%, and 30.6% of the national total EWU, respectively. Specifically, 58.0%, 51.1%, 48.6%, 43.3%, and 37.5% of the regional EWUs respectively in Guangdong, Shanghai, Zhejiang, Jiangsu, and Fujian are attributed to international exports. The total interregional import/export of embodied water is equivalent to about 40% of the national total DWW, of which 55.5% is associated with the DWWs of Electric Power, Steam, and Hot Water Production and Supply. Jiangsu is the biggest interregional exporter and deficit receiver of embodied water, in contrast to Guangdong as the biggest interregional importer and surplus receiver. Without implementing effective water-saving measures and adjusting industrial structures, the regional imbalance between water availability and water demand tends to intensify considering the water impact of domestic trade of industrial products. Steps taken to improve water use efficiency in production, and to enhance embodied water saving in consumption are both of great significance for supporting China's water policies.

The Flemish frozen-vegetable industry as an example of cluster analysis : Flanders Vegetable Valley

NARCIS (Netherlands)

Vanhaverbeke, W.P.M.; Larosse, J.; Winnen, W.; Hulsink, W.; Dons, J.J.M.

2008-01-01

In this contribution we present a strategic analysis of the cluster dynamics in the frozen-vegetable industry in Flanders (Belgium)1. The main purpose of this case is twofold. First, we determine the added value of using data about customer and supplier relationships in cluster analysis. Second, we

Business analysis methodology in telecommunication industry – the research based on the grounded theory

Directory of Open Access Journals (Sweden)

Hana Nenickova

2013-10-01

Full Text Available The objective of this article is to present the grounded theory using in the qualitative research as a basis to build a business analysis methodology for the implementation of information systems in telecommunication enterprises in Czech Republic. In the preparation of the methodology I have used the current needs of telecommunications companies, which are characterized mainly by high dependence on information systems. Besides that, this industry is characterized by high flexibility and competition and compressing of the corporate strategy timeline. The grounded theory of business analysis defines the specifics of the telecommunications industry, focusing on the very specific description of the procedure for collecting the business requirements and following the business strategy.

Analysis and systematization of experience of state administration of Russian Federation military-industrial complex

OpenAIRE

O. F. Salnikova; H. P. Sytnik

2014-01-01

The analysis of the systems of development of the military-industrial complex of the Russian Federation is conducted in the article. Control system of the military-industrial complex of the Russian Federation is schematically represented in the article. Russia is one of the largest exporters of armaments. The most popular types of armaments are airplanes, systems of air defense, helicopters, fighting machines of infantry and small-arms. For today Russia actively masters new on ...

Industry specific financial distress modeling

Directory of Open Access Journals (Sweden)

Naz Sayari

2017-01-01

Full Text Available This study investigates uncertainty levels of various industries and tries to determine financial ratios having the greatest information content in determining the set of industry characteristics. It then uses these ratios to develop industry specific financial distress models. First, we employ factor analysis to determine the set of ratios that are most informative in specified industries. Second, we use a method based on the concept of entropy to measure the level of uncertainty in industries and also to single out the ratios that best reflect the uncertainty levels in specific industries. Finally, we conduct a logistic regression analysis and derive industry specific financial distress models which can be used to judge the predictive ability of selected financial ratios for each industry. The results show that financial ratios do indeed echo industry characteristics and that information content of specific ratios varies among different industries. Our findings show diverging impact of industry characteristics on companies; and thus the necessity of constructing industry specific financial distress models.

Analysis of the Industry Potential in Republic of Moldova

Directory of Open Access Journals (Sweden)

Larisa BUGAIAN

2010-12-01

Full Text Available This article identifies several competitive sectors of the economy that have potential to lead to sustainable economic growth for Republic of Moldova. Sectors were chosen for analysis combining quantitative and qualitative methods. A pool of sectors was selected based on export and sales performance over the last eight years. The final decision of the top sectors was based on the qualitative factors such as prevalence of the SMEs in the sector, gender makeup of the workforce and the regional presence, as well as employment levels and sales growth. The results of analysis showed that following industrial sectors: wine; textiles and apparel; information and communication technology; footwear; construction materials and furniture have the most potential for contributing to transformational growth in the Republic of Moldova economy.

In-depth analysis of the causal factors of incidents reported in the Greek petrochemical industry

Energy Technology Data Exchange (ETDEWEB)

Konstandinidou, Myrto [Institute of Nuclear Technology-Radiation Protection, National Center for Scientific Research ' Demokritos' , Aghia Paraskevi 15310 (Greece); Nivolianitou, Zoe, E-mail: zoe@ipta.demokritos.gr [Institute of Nuclear Technology-Radiation Protection, National Center for Scientific Research ' Demokritos' , Aghia Paraskevi 15310 (Greece); Kefalogianni, Eirini; Caroni, Chrys [School of Applied Mathematical and Physical Sciences, National Technical University of Athens, 9 Iroon Polytexneiou Str., Zografou Campus, 157 80 Athens (Greece)

2011-11-15

This paper presents a statistical analysis of all reported incidents in the Greek petrochemical industry from 1997 to 2003. A comprehensive database has been developed to include industrial accidents (fires, explosions and substance releases), occupational accidents, incidents without significant consequences and near misses. The study concentrates on identifying and analyzing the causal factors related to different consequences of incidents, in particular, injury, absence from work and material damage. Methods of analysis include logistic regression with one of these consequences as dependent variable. The causal factors that are considered cover four major categories related to organizational issues, equipment malfunctions, human errors (of commission or omission) and external causes. Further analyses aim to confirm the value of recording near misses by comparing their causal factors with those of more serious incidents. The statistical analysis highlights the connection between the human factor and the underlying causes of accidents or incidents. - Highlights: > The research work is original, based on field data collected directly from the petrochemical industry. > It deals with the in-depth statistical analysis of accident data on human-organizational causes. > It researches underlying causes of accidents and the parameters affecting them. > The causal factors that are considered cover four big taxonomies. > Near misses are worth recording for comparing their causal factors with more serious incidents.

Analysis of Pelletizing of Granulometric Separation Powder from Cork Industries

Directory of Open Access Journals (Sweden)

Irene Montero

2014-09-01

Full Text Available Cork industries generate a considerable amount of solid waste during their processing. Its management implies a problem for companies that should reconsider its reuse for other purposes. In this work, an analysis of pelletizing of granulometric separation powder, which is one of the major wastes in cork industries and which presents suitable properties (as an raw material for its thermal use, is studied. However, its characteristic heterogeneity, along with its low bulk density (which makes its storage and transportation difficult are restrictive factors for its energy use. Therefore, its densified form is a real alternative in order to make the product uniform and guarantee its proper use in boiler systems. Thus, the cork pellets (from granulometric separation powder in the study met, except for ash content specification, the specifications in standard European Norm EN-Plus (B for its application as fuel for domestic use.

Analysis of Pelletizing of Granulometric Separation Powder from Cork Industries.

Science.gov (United States)

Montero, Irene; Miranda, Teresa; Sepúlveda, Francisco José; Arranz, José Ignacio; Nogales, Sergio

2014-09-18

Cork industries generate a considerable amount of solid waste during their processing. Its management implies a problem for companies that should reconsider its reuse for other purposes. In this work, an analysis of pelletizing of granulometric separation powder, which is one of the major wastes in cork industries and which presents suitable properties (as an raw material) for its thermal use, is studied. However, its characteristic heterogeneity, along with its low bulk density (which makes its storage and transportation difficult) are restrictive factors for its energy use. Therefore, its densified form is a real alternative in order to make the product uniform and guarantee its proper use in boiler systems. Thus, the cork pellets (from granulometric separation powder) in the study met, except for ash content specification, the specifications in standard European Norm EN-Plus (B) for its application as fuel for domestic use.

Profitability primer: a guide to profitability analysis in the electric power industry

International Nuclear Information System (INIS)

Woo, C.K.; Lloyd-Zannetti, D.; Martin, J.; Price, S.

1996-06-01

As the electric power industry is opened to forces of competition, increased attention must be focused to develop products and services that deliver good value to customers and to identify customer segments that are profitable to serve. This primer introduces the concept of profitability analysis and its application to the electric power industry. The primer recognizes that some segments of the business will remain monopolistic and subject to regulations, while other segments will become competitive. The primer also recognizes that customer profitability is critically dependent on a host of related issues such as how internal costs are allocated to various functions and how revenues are collected and allocated

77 FR 9946 - Draft Guidance for Industry on Drug Interaction Studies-Study Design, Data Analysis, Implications...

Science.gov (United States)

2012-02-21

... industry entitled ``Drug Interaction Studies--Study Design, Data Analysis, Implications for Dosing, and... data analysis in the context of identifying potential drug interactions. The guidance also addresses... Studies--Study Design, Data Analysis, and Implications for Dosing and Labeling.'' Comments were received...

The consumption of electric power on the tertiary sector - an instrument for economical and social analysis and market studies

International Nuclear Information System (INIS)

Villela, L.E.

1991-04-01

The main subjective of this thesis is to analyse the effects of the growth of the tertiary sector on the electric power demand. In order to accomplish this goal an economical and social, analysis of the tertiary sector is made to identify its dynamic, its relations with the other sectors of the economy and to describe the methodologies for measuring the overall tertiary production. Afterwards it is made an analysis of the electric power consumption evolution in the tertiary sector, in order to identify the consumption per region of the country, per consumers and tertiary subsectors. It is also analysed the product power intensify and, finally its described the present tariff system. (author)

Analisis Industri Ritel Di Indonesia

OpenAIRE

Soliha, Euis

2008-01-01

This article presents an overview the analisys of retail industry in Indonesia.Retail industry in Indonesia grow rapidly. Industrial presence of modern retailbasically exploits public shopping pattern especially middle-weight and to which donot want to mill around in traditional market. Analysis Five Forces is used toanalysis retail industry. Analysis five force is bargaining power of buyers,bargaining power of suppliers, threat of new entrants, threat of new substituteproducts, and rivalry a...

More Sustainability in Industry through Industrial Internet of Things?

Directory of Open Access Journals (Sweden)

Grischa Beier

2018-01-01

Full Text Available Industrial production plays an important role for achieving a green economy and the sustainable development goals. Therefore, the nascent transformation of industrial production due to digitalization into a so-called Industrial Internet of Things (IIoT is of great interest from a sustainable development point of view. This paper discusses how the environmental dimension of a sustainable development can potentially benefit from the IIoT—focusing especially on three topics: resource efficiency, sustainable energy and transparency. It presents a state of the art literature analysis of IIoT-enabled approaches addressing the three environmental topics. This analysis is compared with the findings of a survey among Chinese industrial companies, investigating the sustainability-related expectations of participants coming along with the implementation of IIoT solutions. China has been chosen as a case study because it brings together a strong industrial sector, ambitious plans regarding industrial digitalization and a high relevance and need for more sustainability. The survey was conducted with the means of a questionnaire which was distributed via email and used for direct on-site interviews. It focused on large and medium sized companies mainly from Liaoning Province and had a sample size of 109 participants.

A atenção pré-natal na ótica de um grupo de mulheres usuárias do subsetor suplementar La atención prenatal en la óptica de un grupo de mujeres usuarias del subsector suplementar Prenatal care attention in the view of a group of women who use the supplementary subsector

Directory of Open Access Journals (Sweden)

Micheli Regina Etges

2011-03-01

Full Text Available Este estudo, de abordagem qualitativa, objetivou conhecer a percepção de mulheres que vivenciaram a Atenção Pré-Natal (APN no contexto do Subsetor Suplementar (SS sobre a qualidade desta atenção. Os dados foram coletados através de entrevistas semi-estruturadas e analisados por categorização descritiva. Para as entrevistadas, a APN foi de qualidade, suprindo suas necessidades e expectativas. Acolhimento, vínculo com o profissional, a consequente segurança transmitida e a duração das consultas foram critérios destacados nesta avaliação. Suas experiências sugerem que a APN realizada no SS segue, em parte, as recomendações do Ministério da Saúde (MS e da Organização Mundial da Saúde (OMS. A freqüência das consultas e as orientações fornecidas são aspectos condizentes ao que se recomenda. Os dados sugerem, contudo, que a APN não segue a orientação do MS e da OMS para que seja evitado o uso excessivo de tecnologias duras, como é o caso das ecografias obstétricas.Este estudio, de abordaje cualitativo, objetivó conocer la percepción de mujeres que vivenciaron la Atención Prenatal (APN en el contexto del Subsector Suplementar (SS sobre la calidad de esta atención. Los datos fueron recolectados a través de entrevistas semiestructuradas y analizados por categorización descriptiva. Para las entrevistadas, la APN fue de calidad, supliendo sus necesidades y expectativas. Acogida, vínculo con el profesional, la consecuente seguridad trasmitida y la duración de las consultas fueron criterios destacados en esta evaluación. Sus experiencias sugestionan que la APN realizada en el SS sigue, en parte, las recomendaciones del Ministerio de la Salud (MS y Organización Mundial de la Salud (OMS. La frecuencia de las consultas y las orientaciones fornecidas son aspectos coherentes a lo que se recomienda. Los datos sugestionan, con todo, que la APN no sigue la orientación del MS y de la OMS para que sea evitado el uso

Análisis de recursividad estructural con trabajo especializado en la teoría de la inexistencia del mercado de trabajo

Directory of Open Access Journals (Sweden)

Juan Roberto Vargas Sánchez

2015-01-01

Full Text Available Se desarrolla un an lisis de recursividad estructural tomando como base la teor a de la inexistencia del mercado de trabajo ( . Para lo cual, se incorpora trabajo es - pecializado en el modelo b sico de la , en particular en la organizaci n interna de las empresas, de ah que la producci n sea posible mediante dos especialidades del trabajo indispensables para producir la gesti n y la manufactura. Se demuestra que si el diferencial salarial que resulta de las distintas remuneraciones a las diferentes espe - cialidades no se modifica, el desempleo en el subsector de los trabajadores-gesti n lo genera en el subsector de los trabajadores-manufactura; para restaurar el pleno empleo en el ltimo subsector mencionado, se requiere que el diferencial salarial se incremente. Adem s, se muestra que la existencia de desempleo en el subsector de los trabajadores- manufactura, la ocasiona en el subsector de los trabajadores-gesti n.

75 FR 24718 - Guidance for Industry on Documenting Statistical Analysis Programs and Data Files; Availability

Science.gov (United States)

2010-05-05

...] Guidance for Industry on Documenting Statistical Analysis Programs and Data Files; Availability AGENCY... documenting statistical analyses and data files submitted to the Center for Veterinary Medicine (CVM) for the... on Documenting Statistical Analysis Programs and Data Files; Availability'' giving interested persons...

Marketing Analysis and Strategy for a Small Business in the Beekeeping Industry.

Science.gov (United States)

1980-08-18

segment has opportunities associated with it that may be profitably 2Philip Kotler , " Marketing Management: Analysis, Planning, and Control," Prentice...I I I162 I I BIBLIOGRAPHY IB Abel, Derek and John Hammond. Strategic Market Planning. Englewood Cliffs, N.J.: Prentice- Hall, Inc., 1979. Kotler ...11I’ISTATIOY I I I I MARKETING ANALYSIS AND STRATEGY FOR A SMALL IBUSINESS IN THE BEEKEEPING INDUSTRY I III APPROVED: Acoession For DDC TABUn mounced or

The need for revaluation of the model structure for electricity liberalization

OpenAIRE

Szablewski, Andrzej T.

2011-01-01

The question about an appropriate structure for the electricity industry has been extensively discussed in scientific literature and experts studies. Since the beginning of electricity liberalization, it was apparent for its promoters that such a structure (in this paper referred to as the model structure or ideal structural model) for the electricity sector should involve a separation of its four sub-sectors, i.e., generation, transmission, distribution, and supply. With the e...

Review of US ESCO industry market trends: an empirical analysis of project data

Energy Technology Data Exchange (ETDEWEB)

Goldman, C.A.; Hopper, N.C.; Osborn, J.G. [Lawrence Berkeley National Laboratory, Berkeley, CA (United States). Energy Analysis

2005-02-01

This comprehensive empirical analysis of US energy service company (ESCO) industry trends and performance employs two parallel analytical approaches: a survey of firms to estimate total industry size, and a database of {approx}1500 ESCO projects, from which we report target markets and typical project characteristics, energy savings and customer economics. We estimate that industry investment for energy-efficiency related services reached US$2 billion in 2000 following a decade of strong growth. ESCO activity is concentrated in states with high economic activity and strong policy support. Typical projects save 150-200 MJ/m{sup 2}/year and are cost-effective with median benefit/cost ratios of 1.6 and 2.1 for institutional and private sector projects. The median simple payback time (SPT) is 7 years among institutional customers; 3 years is typical in the private sector. Reliance on DSM incentives has decreased since 1995. Preliminary evidence suggests that state enabling policies have boosted the industry in medium-sized states. ECSOs have proven resilient in the face of restructuring and will probably shift toward selling 'energy solutions', with energy efficiency part of a package. We conclude that appropriate policy support - both financial and non-financial - can 'jump-start' a viable private-sector energy-efficiency services industry that targets large institutional and commercial/industrial customers. (author)

[Application of Fourier transform attenuated total reflection infrared spectroscopy in analysis of pulp and paper industry].

Science.gov (United States)

Zhang, Yong; Cao, Chun-yu; Feng, Wen-ying; Xu, Ming; Su, Zhen-hua; Liu, Xiao-meng; Lü, Wei-jun

2011-03-01

As one of the most powerful tools to investigate the compositions of raw materials and the property of pulp and paper, infrared spectroscopy has played an important role in pulp and paper industry. However, the traditional transmission infrared spectroscopy has not met the requirements of the producing processes because of its disadvantages of time consuming and sample destruction. New technique would be needed to be found. Fourier transform attenuated total reflection infrared spectroscopy (ATR-FTIR) is an advanced spectroscopic tool for nondestructive evaluation and could rapidly, accurately estimate the production properties of each process in pulp and paper industry. The present review describes the application of ATR-FTIR in analysis of pulp and paper industry. The analysis processes will include: pulping, papermaking, environmental protecting, special processing and paper identifying.

Simulation and analysis of hot forging process for industrial locking gear elevators

Science.gov (United States)

Maarefdoust, M.; Kadkhodayan, M.

2010-06-01

In this paper hot forging process for industrial locking gear elevators is simulated and analyzed. An increase in demand of industrial locking gear elevators with better quality and lower price caused the machining process to be replaced by hot forging process. Production of industrial locking gear elevators by means of hot forging process is affected by many parameters such as billet temperature, geometry of die and geometry of pre-formatted billet. In this study the influences of billet temperature on effective plastic strain, radius of die corners on internal stress of billet and thickness of flash on required force of press are investigated by means of computer simulation. Three-dimensional modeling of initial material and die are performed by Solid Edge, while simulation and analysis of forging are performed by Super Forge. Based on the computer simulation the required dies are designed and the workpieces are formed. Comparison of simulation results with experimental data demonstrates great compatibility.

La evolución tecnológica del distrito cerámico de Castellón: la contribución de la industria de fritas, colores y esmaltes

Directory of Open Access Journals (Sweden)

Tortajada Esparza, E.

2008-04-01

Full Text Available The industrial district of Castellon is characterized by a great dynamism based on technological innovation, both product and process, the origins of which are to be found on its providers (1, the machinery industry and the frit, glaze and colours industry. In this paper the current situation of the frit, glaze and colour industry is analyzed, accounting also for the situation of its main European competitor in Italy. The formation and development of the industry is also described in relation to the industrial district and the innovation system where it belongs, together with the R&D activity, the innovation activity, and the main technological milestones that have made it become the world leader. The analysis shows the challenges to which this subsector, and more generally, the tile innovation system need to react to, by means of cooperation, in order to maintain the tile district leadership. Globalization implies new behaviours and one of the most relevant is the increase of cooperation among the different actors in the innovation system.

El distrito industrial de Castellón se caracteriza por un gran dinamismo fundamentado en la innovación tecnológica, tanto de proceso como de producto, cuyo origen está básicamente en sus proveedores (1, la industria de equipamiento mecánico y la industria de fritas, esmaltes y colores cerámicos. En este artículo se analiza la situación actual de la industria de fritas, esmaltes y colores cerámicos española, atendiendo además a la situación de su mayor competidor europeo, Italia. Se describe también la formación y desarrollo de la industria en el entorno del distrito cerámico de Castellón y de su sistema de innovación, se analizan, asimismo la actividad en I+D e innovación así como los hitos tecnológicos que le han llevado a ocupar un liderazgo mundial. El análisis realizado identifica los retos frente a los que el subsector y, en general, el sistema de innovación cer

Control Systems Security Center Comparison Study of Industrial Control System Standards against the Control Systems Protection Framework Cyber-Security Requirements

Energy Technology Data Exchange (ETDEWEB)

Robert P. Evans

2005-09-01

Cyber security standards, guidelines, and best practices for control systems are critical requirements that have been delineated and formally recognized by industry and government entities. Cyber security standards provide a common language within the industrial control system community, both national and international, to facilitate understanding of security awareness issues but, ultimately, they are intended to strengthen cyber security for control systems. This study and the preliminary findings outlined in this report are an initial attempt by the Control Systems Security Center (CSSC) Standard Awareness Team to better understand how existing and emerging industry standards, guidelines, and best practices address cyber security for industrial control systems. The Standard Awareness Team comprised subject matter experts in control systems and cyber security technologies and standards from several Department of Energy (DOE) National Laboratories, including Argonne National Laboratory, Idaho National Laboratory, Pacific Northwest National Laboratory, and Sandia National Laboratories. This study was conducted in two parts: a standard identification effort and a comparison analysis effort. During the standard identification effort, the Standard Awareness Team conducted a comprehensive open-source survey of existing control systems security standards, regulations, and guidelines in several of the critical infrastructure (CI) sectors, including the telecommunication, water, chemical, energy (electric power, petroleum and oil, natural gas), and transportation--rail sectors and sub-sectors. During the comparison analysis effort, the team compared the requirements contained in selected, identified, industry standards with the cyber security requirements in ''Cyber Security Protection Framework'', Version 0.9 (hereafter referred to as the ''Framework''). For each of the seven sector/sub-sectors listed above, one standard was