Annual report of the Osaka Laboratory for Radiation Chemistry, Japan Atomic Energy Research Institute, (no. 11)

International Nuclear Information System (INIS)

1978-10-01

This report describes research activities of Osaka Laboratory for Radiation Chemistry, JAERI during one year period from April 1, 1977 through March 31, 1978. The latest report, for 1977, is JAERI-M 7355. Detailed descriptions of the activities are presented in the following subjects: studies on reactions of carbon monoxide and hydrogen; polymerization under the irradiation of high dose rate electron beams; modification of polymers, degradation, cross-linking, and grafting. (author)

Annual report of the Osaka Laboratory for Radiation Chemistry Japan Atomic Energy Research Institute, No. 10

International Nuclear Information System (INIS)

1977-10-01

This report describes research activities of Osaka Laboratory for Radiation Chemistry, JAERI during one year period from April 1, 1976 through March 31, 1977. The latest report, for 1976, is JAERI-M 6702. Detailed descriptions of the activities are presented in the following subjects: studies on reactions of carbon monoxide and hydrogen; polymerization under the irradiation of high dose rate electron beams; modification of polymers, degradation, cross-linking, and grafting. (auth.)

Annual report of the Osaka Laboratory for Radiation Chemistry Japan Atomic Energy Research Institute, (No. 26)

International Nuclear Information System (INIS)

1994-03-01

The annual research activities of Osaka Laboratory for Radiation Chemistry, JAERI during the fiscal year of 1992 (April 1, 1992 - March 31, 1993) are described. The research activities were conducted under the two research programs: the study on laser-induced organic chemical reactions and the study on basic radiation technology for functional materials. Detailed descriptions of the activities are presented in the following subjects: laser-induced organic synthesis, modification of polymer surface by laser irradiation, radiation-induced polymerization, preparation of fine particles by gamma ray irradiation, and electron beam dosimetry. The operation report of the irradiation facilities is also included. (author)

Annual report of the Osaka Laboratory for Radiation Chemistry, Japan Atomic Energy Research Institute, No. 12

International Nuclear Information System (INIS)

1979-11-01

This report describes research activities of Osaka Laboratory for Radiation Chemistry, JAERI during one year period from April 1, 1978 through March 31, 1979. The latest report, for 1978, is JAERI-M 7949. Detailed descriptions of the activities are presented in the following subjects: studies on reactions of carbon monoxide, hydrogen and methane; polymerization under the irradiation of high dose rate electron beams; modification of polymers, degradation, cross-linking, and grafting. (author)

Annual report of the Osaka Laboratory for Radiation Chemistry Japan Atomic Energy Research Institute (no. 16)

International Nuclear Information System (INIS)

1983-11-01

This report describes research activities of Osaka Laboratory for Radiation Chemistry, JAERI during one year period from April 1, 1982 through March 31, 1983. The latest report, for 1982, is JAERI-M 82-192. Detailed descriptions of the activities are presented in the following subjects: studies on reactions of carbon monoxide, water and methane; polymerization under the irradiation of high dose rate electron beams; modification of polymers, degradation, cross-linking, and grafting. (author)

Travel-related illness at a tertiary care hospital in Osaka, Japan

OpenAIRE

Hadano,Yoshiro; Shirano,Michinori; Goto,Tetsushi

2016-01-01

Yoshiro Hadano, Michinori Shirano, Tetsushi Goto Center for Infectious Diseases, Osaka City General Hospital, Osaka, Japan Abstract: We analyzed the travel-related health problems in persons returning to Japan from overseas. Data were extracted retrospectively for all patients visiting the infectious diseases department of Osaka City General Hospital, Osaka, Japan, between July 2012 and September 2013. There were 209 sick returning travelers during the period of the study. ...

Annual reports of the Osaka Laboratory for Radiation Chemistry Japan Atomic Energy Research Institute, (No. 23, 24, 25)

International Nuclear Information System (INIS)

1992-09-01

Research activities of Osaka Laboratory for Radiation Chemistry, JAERI during three year period from April 1, 1989 through March 31, 1992 are described. The latest report. for 1988, is JAERI-M 91-054. Detailed descriptions of the activities are presented in the following subjects: laser-induced organic synthesis, modification of polymer surface by laser irradiation, polymerization and modification of polymers by electron beam, and electron beam dosimetry. (author) 77 refs

Annual report of Laboratory of Nuclear Studies, Osaka University, for fiscal 1995

International Nuclear Information System (INIS)

1996-01-01

This publication is the progress report of the research activities carried out by the members of the Osaka University Laboratory of Nuclear Studies (OULNS) in fiscal year 1995. Some groups carried out their experimental researches using the major research facilities at the OULNS, that include 4.75 MV Van de Graaff, a mass spectrograph, and an M360 Computer. Other groups intensively carried out all or part of their researches outside Osaka University including the facilities in foreign countries. In short the reader will enjoy a whole spectrum of research fields studied by nuclear and particle techniques. To expand and enrich the studies in the interdisciplinary region between nuclear physics and solid state physics investigated by use of nuclear technologies, especially by use of unstable nuclear beams, OULNS is now planning a small Radioactive-Nuclear-Beam Facility which consists of an AVF cyclotron of K = 30 with high intensity beams of light ions and a post accelerator, a radio-frequency-quadrupole accelerator (RFQ). (J.P.N.)

[Explicit and implicit attitudes toward standard-Japanese and Osaka-dialect language use].

Science.gov (United States)

Watanabe, Takumi; Karasawa, Kaori

2013-04-01

This article examines the effects of language use on explicit and implicit attitudes. We employed the matched-guise technique to measure participants' impressions of standard-Japanese and Osaka-dialect speakers. Implicit attitudes were assessed by the Implicit Association Test (IAT). The Osaka-dialect speaker was evaluated as warmer than the standard-Japanese speaker, suggesting that explicit attitudes toward the Osaka dialect have changed positively. On the other hand, the results for the impression of intelligence were consistent with the previous literature that the standard-Japanese speaker was seen as more intelligent than the Osaka-dialect speaker. Compared with explicit attitudes, the analyses of implicit attitudes revealed that participants showed a consistent implicit bias favoring standard-Japanese language use. The changing processes and relationships of explicit and implicit attitudes were discussed.

Annual report of the Osaka Laboratory for Radiation Chemistry Japan Atomic Energy Research Institute, 22. April 1, 1988 - March 31, 1989

International Nuclear Information System (INIS)

1991-03-01

This report describes research activities of Osaka Laboratory for Radiation Chemistry, JAERI during one year period from April 1, 1988 through March 31, 1989. The latest report, for 1987, is JAERI-M 90-054. Detailed descriptions of the activities are presented in the following subjects : (i) studies on laser-induced organic chemical reactions and (ii) studies on radiation chemistry of high polymers and radiation dosimetry. (J.P.N.)

Distributions of polycyclic aromatic hydrocarbons and alkylated polycyclic aromatic hydrocarbons in Osaka Bay, Japan.

Science.gov (United States)

Miki, Shizuho; Uno, Seiichi; Ito, Kazuki; Koyama, Jiro; Tanaka, Hiroyuki

2014-08-30

Contaminations in sediments by polycyclic aromatic hydrocarbons (PAHs) and alkylated PAHs were investigated at 44 sites in Osaka Bay, Japan. Concentrations of total PAHs and alkylated PAHs were in the range 6.40-7800 ng/g dry weights and 13.7-1700 ng/g dry weights, respectively. The PAH concentrations tended to be higher along the shoreline in the vicinities of big ports, industrialized areas, and densely populated regions such as the cities of Osaka and Kobe. The major sources appeared to be pyrogenic or both pyrogenic and petrogenic at most of the sites. PAH concentrations were remarkably high at a site near Kobe, where the concentrations of dibenzo(a,h)anthracene and benzo(g,h,i)perylene exceeded the effects-range-medium concentration and eight PAHs were above the corresponding effects-range-low concentrations. Those PAHs may have been derived from the great fire associated with the large earthquake in 1995. Copyright © 2014 Elsevier Ltd. All rights reserved.

Study on quantum beam science by using ultra short electron pulse, FEL, and slow positron beam at ISIR (Institute of Science and Industrial Research), Osaka University

International Nuclear Information System (INIS)

Yoshida, Y.; Tagawa, S.; Okuda, S.; Honda, Y.; Kimura, N.; Yamamoto, T.; Isoyama, G.

1995-01-01

Three projects for quantum beam science, an ultra fast electron pulse, a free electron laser, and a slow positron beam, has been started by using 38 MeV L-band and 150 MeV S-band linacs at ISIR in Osaka University. Both study on the production of three beams and study on quantum material science by using three beams will play an important role in the beam science. (author)

Construction of transmission pipeline across Osaka bay area -pipeline construction by shield tunnel under seabed-; Construction d'un gazoduc dans la zone de la baie d'Osaka - tunnel de protection sous-marin

Energy Technology Data Exchange (ETDEWEB)

Takashi, AIhara [Osaka Gas Co., Ltd (Japan)

2000-07-01

Osaka Gas has been constructing a transmission gas pipeline across Osaka Bay Area with Osaka Port that has busy traffic. The company met several technical problems on the construction-design with measures against the subsidence of reclaimed land, anti-seismic measures, for example, in designing the pipeline construction by shield tunnel under seabed. This paper introduces the solutions to the technical problems. (authors)

Prevalence and Risk Factors for Self-Reported Violence of Osaka and Seattle Male Youths

Science.gov (United States)

Bui, Laura; Farrington, David P.; Ueda, Mitsuaki; Hill, Karl G.

2013-01-01

Traditionally, Japan has been regarded as a country with low crime. Comparative research has given insights into the extent of similarities and differences in crime between America and Japan. The importance of these studies is the examination of whether Western-established criminological knowledge is applicable to non- Western societies like Japan. Unfortunately, comparative self-report studies involving Japan and investigating youth offending are scarce. The current study investigates risk factors and self-reports of violence from Osaka and Seattle male youths. The findings reveal that Japanese male youths self-report a higher prevalence of violence than Seattle male youths. Risk factors for violence, issues of comparability, and prevalence versus strength of relationships of risk factors are examined. It is concluded that the higher prevalence of violence in Osaka is primarily a function of the higher prevalence of troubled peers and risk taking. The findings call for replication of this type of comparative research. PMID:24013769

Annual report of the Osaka Laboratory for Radiation Chemistry Japan Atomic Energy Research Institute, (No. 28). April 1, 1994 - March 31, 1995

International Nuclear Information System (INIS)

1995-10-01

The annual research activities of Osaka Laboratory for Radiation Chemistry, JAERI during the fiscal year of 1994 (April 1, 1994 - March 31, 1995) are described. The research activities were conducted under two research programs: the study on laser-induced organic chemical reactions and the study on basic radiation technology for functional materials. Detailed descriptions of the activities are presented as reviews on the following subjects: laser-induced chemical transformation, laser-induced reaction of polymer surface, microprocessing by radiation-induced polymerization, preparation of fine metal particles by gamma ray irradiation, and electron beam dosimetry. The operation report of the irradiation facilities is also included. (author)

Annual report of the Osaka Laboratory for Radiation Chemistry Japan Atomic Energy Research Institute, (No. 28). April 1, 1994 - March 31, 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-10-01

The annual research activities of Osaka Laboratory for Radiation Chemistry, JAERI during the fiscal year of 1994 (April 1, 1994 - March 31, 1995) are described. The research activities were conducted under two research programs: the study on laser-induced organic chemical reactions and the study on basic radiation technology for functional materials. Detailed descriptions of the activities are presented as reviews on the following subjects: laser-induced chemical transformation, laser-induced reaction of polymer surface, microprocessing by radiation-induced polymerization, preparation of fine metal particles by gamma ray irradiation, and electron beam dosimetry. The operation report of the irradiation facilities is also included. (author).

Scientific Grid activities and PKI deployment in the Cybermedia Center, Osaka University.

Science.gov (United States)

Akiyama, Toyokazu; Teranishi, Yuuichi; Nozaki, Kazunori; Kato, Seiichi; Shimojo, Shinji; Peltier, Steven T; Lin, Abel; Molina, Tomas; Yang, George; Lee, David; Ellisman, Mark; Naito, Sei; Koike, Atsushi; Matsumoto, Shuichi; Yoshida, Kiyokazu; Mori, Hirotaro

2005-10-01

The Cybermedia Center (CMC), Osaka University, is a research institution that offers knowledge and technology resources obtained from advanced researches in the areas of large-scale computation, information and communication, multimedia content and education. Currently, CMC is involved in Japanese national Grid projects such as JGN II (Japan Gigabit Network), NAREGI and BioGrid. Not limited to Japan, CMC also actively takes part in international activities such as PRAGMA. In these projects and international collaborations, CMC has developed a Grid system that allows scientists to perform their analysis by remote-controlling the world's largest ultra-high voltage electron microscope located in Osaka University. In another undertaking, CMC has assumed a leadership role in BioGrid by sharing its experiences and knowledge on the system development for the area of biology. In this paper, we will give an overview of the BioGrid project and introduce the progress of the Telescience unit, which collaborates with the Telescience Project led by the National Center for Microscopy and Imaging Research (NCMIR). Furthermore, CMC collaborates with seven Computing Centers in Japan, NAREGI and National Institute of Informatics to deploy PKI base authentication infrastructure. The current status of this project and future collaboration with Grid Projects will be delineated in this paper.

Spatial and Temporal Variations of Atmospheric Aerosol in Osaka

Directory of Open Access Journals (Sweden)

Sonoyo Mukai

2013-05-01

Full Text Available It is well known that the aerosol distribution in Asia is complex due to both the increasing emissions of the anthropogenic aerosols associated with economic growth and the behavior of natural dusts. Therefore, detailed observations of atmospheric particles in Asian urban cities are important. In this work, we focus on the spatial and temporal variations of atmospheric particles around Higashi-Osaka in Japan. Higashi-Osaka is located in the eastern part of Osaka, the second-largest city in Japan, and is famous for small- and medium-sized manufacturing enterprises. For this study, we placed various ground measurement devices around the Higashi-Osaka campus of Kinki University including a Cimel sunphotometer supported by NASA/AERONET (Aerosol robotics network, suspended particulate matter (SPM sampler and LIDAR (light detection and ranging. Individual particle analyses with a SEM (scanning electron microscope/EDX (energy-dispersive X-ray analyzer show the temporal variations of particle properties, such as size, shape and components, during a dust event on 21 March 2010. The simultaneous measurement using a portable sun photometer with AERONET was conducted from April to November 2011. A comparison of the data at each site and the combination of the observed LIDAR data and model simulations indicate the difference in the transportation processes between dust and anthropogenic particles. We suppose this difference is attributed to the differences in the vertical aerosol profiles, where one aerosol is transported over Mount Ikoma and the other is blocked by it.

Long-period Ground Motion Simulation in the Osaka Basin during the 2011 Great Tohoku Earthquake

Science.gov (United States)

Iwata, T.; Kubo, H.; Asano, K.; Sato, K.; Aoi, S.

2014-12-01

Large amplitude long-period ground motions (1-10s) with long duration were observed in the Osaka sedimentary basin during the 2011 Tohoku earthquake (Mw9.0) and its aftershock (Ibaraki-Oki, Mw7.7), which is about 600 km away from the source regions. Sato et al. (2013) analyzed strong ground motion records from the source region to the Osaka basin and showed the following characteristics. (1) In the period range of 1 to 10s, the amplitude of horizontal components of the ground motion at the site-specific period is amplified in the Osaka basin sites. The predominant period is about 7s in the bay area where the largest pSv were observed. (2) The velocity Fourier amplitude spectra with their predominant period of around 7s are observed at the bedrock sites surrounding the Osaka basin. Those characteristics were observed during both of the mainshock and the largest aftershock. Therefore, large long-period ground motions in the Osaka basin are generated by the combination of propagation-path and basin effects. They simulated ground motions due to the largest aftershock as a simple point source model using three-dimensional FDM (GMS; Aoi and Fujiwara, 1999). They used a three-dimensional velocity structure based on the Japan Integrated Velocity Structure Model (JIVSM, Koketsu et al., 2012), with the minimum effective period of the computation of 3s. Their simulation result reproduced the observation characteristics well and it validates the applicability of the JIVSM for the long period ground motion simulation. In this study, we try to simulate long-period ground motions during the mainshock. The source model we used for the simulation is based on the SMGA model obtained by Asano and Iwata (2012). We succeed to simulate long-period ground motion propagation from Kanto area to the Osaka basin fairly well. The long-period ground motion simulations with the several Osaka basin velocity structure models are done for improving the model applicability. We used strong motion

Fission-track ages of Neogene and Quaternary volcanic ashes in south of Osaka, Japan

International Nuclear Information System (INIS)

Yokoyama, Takuo; Nakagawa, Yonosuke; Danhara, Tohru.

1984-01-01

A calculation method is proposed for the fission-track ages of zircon crystals in volcanic material. In this method, it is checked whether the spontaneous fission-track number of respective zircon crystals follows the Poisson distribution. If it does, the age is calculated by population method with all crystals, and if not, only with those crystals following the Poisson distribution, eliminating abnormal crystals. Extraneous zircon crystals are thus excluded and crystals with spontaneous fission-track number zero are not ignored. The following ages were obtained: Tamateyama volcanic ash in the Nijo group, 14.0 +- 0.6 Ma; pink volcanic ash in the Osaka group, 1.0 +- 0.2 Ma; Matsuo volcanic ash in the Ko-Osaka group, 1.5 +- 0.4 Ma; pumice volcanic ash in the Ko-Osaka group, 2.3 +- 0.4 Ma; Asashiro volcanic ash in the Ko-Osaka group, 2.9 +- 0.6 Ma. (Mori, K.)

Distribution of perfluoroalkyl compounds in Osaka Bay and coastal waters of Western Japan.

Science.gov (United States)

Beškoski, Vladimir P; Yamamoto, Katsuya; Yamamoto, Atsushi; Okamura, Hideo; Hayashi, Mitsuru; Nakano, Takeshi; Matsumura, Chisato; Fukushi, Keiichi; Wada, Shinpei; Inui, Hideyuki

2017-03-01

Perfluoroalkyl acids (PFAAs) including perfluoroalkyl sulfonates (PFSAs) and perfluoroalkyl carboxylates (PFCAs) were analyzed in sediment samples taken from Ajifu Waterway in Osaka city, from Osaka Bay, and from Kagoshima Bay, as well as in fifteen seawater samples collected from Osaka Bay and coastal waters of Western Japan. In all sediment samples, only PFCAs were detected, and the highest concentration was determined in Ajifu Waterway, where ΣPFAA was 58990 ng kg -1 dry weight. The total concentrations of PFAAs in sea water samples ranged between the limit of quantification and 53.4 ng L -1 , and perfluorohexanoic acid was the most prevalent and had the highest concentration of 37 ng L -1 . The changes in the patterns and concentrations of PFAAs in Osaka Bay and coastal waters of Western Japan indicate that the PFAAs in surface waters are influenced by sources from Keihanshin Metropolitan Area, mainly the Yodo River basin, and the dilution effect which naturally occurs during their transport to the Pacific Ocean. Copyright © 2016 Elsevier Ltd. All rights reserved.

[Beginnings of the study of Western sciences, "Rangaku," in Kyoto and Osaka in close relations with the Edo school].

Science.gov (United States)

Murata, T

2001-01-01

Beginnings of the study of Western sciences, "Rangaku," in Kyoto and Osaka in the late 18th century are reviewed. Profiles and achievements of several active learners are briefly described; they include Koishi Genzui (Osaka-Kyoto), Tsuji Ranshitsu (Kyoto), Kimura Kenkadō (Osaka), and Hashimoto Sōkichi (Osaka). Genzui, after having successfully made good relations with Sugita Genpaku and Ohtsuki Gentaku, leading masters of the Edo school, played a role of an advocator for promoting "Rangaku" in Osaka and Kyoto. As a result, Kenkadō attained the publication of his book "Ikkaku Sankō," a monograph of the Western crude drug unicorn, with the help of Gentaku, who had translated a Dutch reference into Japanese for him. Ranshitsu and Sōkichi were taught the Dutch language by Gentaku; Sōkichi is known as the founder of "Rangaku" in Osaka.

Summary of discussions on the next project at RCNP, Osaka University

International Nuclear Information System (INIS)

1985-01-01

A meeting was held in May 1985 to discuss what should be the next project of RCNP (Research Center for Nuclear Physics), Osaka University, in relation with other similar projects in Japanese Universities or institutes. About 70 researchers from various universities and institutes in Japan gathered and discussed new nuclear physics projects including a 300 MeV cyclotron. Before entering discussions some short reports conserning selection of machine, requirement from physical studies or political problems were presented. And some selected commentators gave short comments for active discussions. All these reports and comments are included in this collective report. (Aoki, K.)

Present status of direct drive inertial confinement fusion research at ILE Osaka University

International Nuclear Information System (INIS)

Yamanaka, Tatsuhiko; Nakai, Sadao

1993-01-01

The activities of direct drive implosion experiments at ILE of Osaka Univ. are focused on the planar- and spherical-target experiments relating to Rayleigh-Taylor instability and the implosion experiments of cryogenic targets with low density plastic foam shell overcoated by a solid plastic layer. In the spherical shell target implosions a very early x-ray emission (refer as pre-emission hereafter) has been observed at the center of the target. The appearance of the pre-emission is related to the illumination nonuniformity. The appearance time of the pre-emission, the electron temperature of the source plasma of the pre-emission and the possibility of Rayleigh-Taylor instability have been studied experimentally to understand the mechanism of the pre-emission. Shell break up by Rayleigh-Taylor instability has been concluded to be the most probable mechanism of the pre-emission

Seismic reflection survey of the Uemachi fault in Osaka Prefecture; Osaka Uemachi danso no hanshaho danseiha tansa

Energy Technology Data Exchange (ETDEWEB)

Sugiyama, Y [Geological Survey of Japan, Tsukuba (Japan); Yoshizawa, M; Hirooka, S [Nikko Exploration and Development Co. Ltd., Tokyo (Japan); Yokota, H; Ito, S [Hanshin Consultant Co., Osaka (Japan); Hayashi, K; Aizawa, H

1997-05-27

Reflection survey is conducted using three traverse lines in Sakai City for confirming the presence of a southward stretch of the Uemachi fault underground along the western periphery of the Uemachi terrace, Osaka, and for elucidating its connection to the Sakamoto fault distributed near Izumi. Another reflection survey is conducted in the bed of Kanzaki river, Osaka, for the confirmation of its connection to the Nembutsuji-zan fault in Senri hillock. It is estimated on the basis of boring data that there exists another flexural structure approximately 3km south of the flexural structure whose presence is confirmed by the Sakai second traverse line. Accordingly, possibilities are high that the southward stretch of the Uemachi fault connects to the Sakamoto fault. The confirmation by the Kanzaki river traverse line of the flexural structure again confirms the continuity between the Uemachi fault and Nembutsuji-zan fault. The above-said findings enable an inference that the three faults of Nembutsuji-zan, Uemachi, and Sakamoto constitute a chain of active faults. Furthermore, there exists an active fault to the south of the Sakamoto fault, which zigzags to the south on the right-hand side as far as the south of the Kumeda pond. Accordingly, the Uemachi fault system as a whole spans approximately 43km from the northern end of the Nembutsuji-zan fault as far as the south of the Kumeda pond. 5 refs., 6 figs.

Volatile organic compounds in urban rivers and their estuaries in Osaka, Japan.

Science.gov (United States)

Yamamoto, K; Fukushima, M; Kakutani, N; Kuroda, K

1997-01-01

The levels and distribution of 55 volatile organic compounds (VOCs) were determined by purge and trap GC-MS on water samples from 30 sites within the urban rivers and estuaries of Osaka, a populated industrialized city of Japan. Forty of 55 target VOCs listed in the US EPA Method 524.2 were detected. Dichloromethane (DCM) was found at higher levels at all of the sampling sites. The distribution of dominant VOCs followed four different patterns. First, the most common VOCs (DCM, toluene, trichloroethene and tetrachloroethene) showed concentration maxima in the river segments, and the sites of maximum concentration fluctuated due to irregular large spills and/or loadings. Second, one VOC (cis-1,2-dichloroethene) was evenly distributed in particular rivers due to fixed loadings. Both of these patterns were found in the upper and middle reaches. Third, some of VOCs (1,2,3-trichloropropane and benzene) were specific to a single industrial site and truceable to those sources. Finally, some VOCs showed no concentration maxima along the rivers and entered from multiple sources (chloroform and bromodichloromethane). Diurnal variations of VOCs at the border of the city area, receiving domestic and industrial discharges, provided information to interpret their observed downstream distribution and possible sources.

Influence of ship emission on atmospheric pollutant concentration around Osaka Bay, Japan

International Nuclear Information System (INIS)

Kondo, A.; Yamaguchi, K.; Nishikawa, E.

1999-01-01

Marine traffic in Osaka Bay is very intensified and much atmosphere pollutant (SO x and NO x ) from ships is released but there is no regulation about the ship emission. In this paper, we investigated the emission amounts of SO x NO x and HC from car, factory and ships in Osaka bay area and estimated the influence of the ship emission on the atmospheric pollutant concentration, using both the meteorological prediction model and the atmospheric pollutant concentration prediction model including the dry deposition and the chemical reaction. In Osaka bay area, the emission amounts of SO x and NO x from ships were about 30% of the total emission amounts, respectively. Using these emission data, the atmospheric pollutant concentration was simulated on a summer fine day when high oxidant concentration was measured at several observatories and was compared with the observed data. Though some differences were seen between the simulated results and the observed data, the diurnal variation agreed reasonably. The second simulation was carried out except for the ship emission and we estimated the influence of the ship emission on the atmospheric pollutant concentration. It was found that the ship emission raised SO 2 , NO 2 and NO concentration not only in shore area but also in 40km inland. (Author)

Prevalence of insomnia among residents of Tokyo and osaka after the great East Japan earthquake: a prospective study.

Science.gov (United States)

Sugiura, Hiroaki; Akahane, Manabu; Ohkusa, Yasushi; Okabe, Nobuhiko; Sano, Tomomi; Jojima, Noriko; Bando, Harumi; Imamura, Tomoaki

2013-01-18

The Great East Japan Earthquake occurred on March 11, 2011. Tokyo and Osaka, which are located 375 km and 750 km, respectively, from the epicenter, experienced tremors of 5.0 lower and 3.0 seismic intensity on the Japan Meteorological Agency scale. The Great East Japan Earthquake was the fourth largest earthquake in the world and was accompanied by a radioactive leak at a nuclear power plant and a tsunami. In the aftermath of a disaster, some affected individuals presented to mental health facilities with acute stress disorder (ASD) and/or post-traumatic stress disorder (PTSD). However, few studies have addressed mental stress problems other than ASD or PTSD among the general public immediately after a disaster. Further, the effects of such a disaster on residents living at considerable distances from the most severely affected area have not been examined. This study aimed to prospectively analyze the effect of a major earthquake on the prevalence of insomnia among residents of Tokyo and Osaka. A prospective online questionnaire study was conducted in Tokyo and Osaka from January 20 to April 30, 2011. An Internet-based questionnaire, intended to be completed daily for a period of 101 days, was used to collect the data. All of the study participants lived in Tokyo or Osaka and were Consumers' Co-operative Union (CO-OP) members who used an Internet-based food-ordering system. The presence or absence of insomnia was determined before and after the earthquake. These data were compared after stratification for the region and participants' age. Multivariate analyses were conducted using logistic regression and a generalized estimating equation. This study was conducted with the assistance of the Japanese CO-OP. The prevalence of insomnia among adults and minors in Tokyo and adults in Osaka increased significantly after the earthquake. No such increase was observed among minors in Osaka. The overall adjusted odds ratios for the risk of insomnia post-earthquake versus pre

The sixteenth period report on the cooperative utilization of the AVF cyclotron at Osaka University RCNP (May 1983 - Oct 1983)

International Nuclear Information System (INIS)

1984-01-01

The AVF cyclotron at the RCNP (Research Center for Nuclear Physics) of Osaka University has been cooperatively used by various researchers of Japanese universities or colleges. This collective report covers papers concerning various studies performed on the AVF during May 1983 to Oct 1983. About 30 individual papers are presented (some in English and the others in Japanese). (Aoki, K.)

Collection of outlines of achievement reports for fiscal 1976 on Sunshine Program. Hydrogen energy; 1976 nendo sunshine keikakaku seika hokokusho gaiyoshu. Suiso energy

Energy Technology Data Exchange (ETDEWEB)

NONE

1977-04-01

Twenty studies are outlined, which are: Hydrogen production technology using electrolysis (Osaka National Research Institute); Hydrogen production technology using high-temperature/high-pressure electrolysis (Showa Denko K.K., and 1 other); Hydrogen production technologies using thermochemical method (4 articles - Osaka National Research Institute; Tokyo National Research Institute; Hitachi, Ltd.; Mitsubishi Heavy Industries, Ltd.); Water decomposition by thermochemical and photochemical hybrid cycle (Yokohama National University); Hydrogen production technology using direct thermolysis (Electrotechnical Laboratory); Hydrogen solidification technology (2 articles - Osaka National Research Institute; Tokyo National Research Institute); Combustion technology (Osaka National Research Institute); Materials for fuel cells (Osaka National Research Institute); Manufacture of fuel cells (Electrotechnical Laboratory); Systematization of fuel cells (Electrotechnical Laboratory); Hydrogen-fueled engine (Mechanical Engineering Laboratory); Disaster prevention technologies for gaseous and liquid hydrogen, etc. (Tokyo National Research Institute); Prevention of embrittlement of materials used with hydrogen (Chugoku National Research Institute); Refining, transportation, and storage systems, and safety techniques for hydrogen (Industrial Research Institute); Hydrogen energy total system (Electrotechnical Laboratory); Comprehensive examination of hydrogen-using subsystems and peripheral technologies (Electrochemical Society of Japan, and 6 others). (NEDO)

Annual report of Research Center for Nuclear Physics, Osaka University. April 1, 1993 - March 31, 1994

International Nuclear Information System (INIS)

Matsuoka, Nobuyuki; Miura, Iwao; Takahisa, Keiji

1994-01-01

This volume of the RCNP annual report gives briefly research activities of the RCNP (Research Center for Nuclear Physics), Osaka University, in the academic year of 1993 (April 1993 - March 1994). RCNP is a national nuclear physics laboratory with the AVF cyclotron and the ring cyclotron. This annual report includes major research activities at RCNP as follows. 1) Low-energy nuclear physics by means of the K=140 MeV AVF cyclotron. Nuclear reactions and nuclear structures were studied. 2) Medium-energy nuclear physics by means of the 0.4 GeV ring cyclotron. The new ring cyclotron is in full operation, and several new progresses in the medium energy nuclear physics have been made. In particular, spin-isospin responses for discrete states, giant resonances and for quasi-free scattering processes have been studied by means of charge exchange reactions. 3) Heavy-ion physics with the secondary radio-active nuclear beams. It includes production of radioactive nuclei with large spin-polarization and studies of snow-balls. 4) Non-accelerator physics programs have started in collaboration with the Dept. Phys. group. Neutrino studies by means of double beta decays and dark matter searches by means of scintillators are under progress at the Kamioka underground laboratory. 5) Theoretical works on nuclear structures and nuclear reactions. The RCNP computers are widely used for theoretical studies all over Japan. 6) Developments of accelerators and detector systems. The new external ion-source and the new axial injection line are build in order to increase beam currents. (J.P.N.)

The Fourth International Network of Twin Registries: Overview from Osaka/Research Reviews: Familial Fraternal Twinning; Twin Study of Masculine Faces; Physical Aggression and Epigenetics; Prenatal Education for Parents of Twins/Current Events: 2016 Guinness Book of World Records; Oldest Living Male Twins; Twins Reunited at Sixty-Nine; Panda Twins; Twins.com.

Science.gov (United States)

Segal, Nancy L

2015-12-01

The 4th International Network of Twin Registries (INTR) Consortium Meeting took place in Osaka, Japan, September 28-29, 2015. The venue was the Osaka Medical Center for Medical Innovation and Translational Research. An overview of presentations and other activities is provided. Next, 1930s research on familial fraternal twinning, preference for masculine faces, physical aggression and epigenetics, and a prenatal education program for parents of multiples are described. Current twin-related events include the 2016 Guinness Book of World Records (GWR), the oldest living male twins, newly reunited twins, the birth of panda twins and a controversial twin-based website.

Anthropogenic effects on the subsurface thermal and groundwater environments in Osaka, Japan and Bangkok, Thailand.

Science.gov (United States)

Taniguchi, Makoto; Shimada, Jun; Fukuda, Yoichi; Yamano, Makoto; Onodera, Shin-ichi; Kaneko, Shinji; Yoshikoshi, Akihisa

2009-04-15

Anthropogenic effects in both Osaka and Bangkok were evaluated to compare the relationships between subsurface environment and the development stage of both cities. Subsurface thermal anomalies due to heat island effects were found in both cities. The Surface Warming Index (SWI), the departure depth from the steady geothermal gradient, was used as an indicator of the heat island effect. SWI increases (deeper) with the magnitude of heat island effect and the elapsed time starting from the surface warming. Distributions of subsurface thermal anomalies due to the heat island effect agreed well with the distribution of changes in air temperature due to the same process, which is described by the distribution of population density in both Osaka and Bangkok. Different time lags between groundwater depression and subsidence in the two cities was found. This is attributed to differences in hydrogeologic characters, such as porosity and hydraulic conductivity. We find that differences in subsurface degradations in Osaka and Bangkok, including subsurface thermal anomalies, groundwater depression, and land subsidence, depends on the difference of the development stage of urbanization and hydrogeological characters.

Atmospheric alcohols and aldehydes concentrations measured in Osaka, Japan and in Sao Paulo, Brazil

International Nuclear Information System (INIS)

Nguyen, Ha Thi-Hoang; Takenaka, Norimichi; Bandow, Hiroshi; Maeda, Yasuaki; Oliva, S.T. de; Botelho, M.M.; Tavares, T.M.

2001-01-01

The use of alcohol fuel has received much attention since the 1980s. In Brazil, ethanol-fuelled vehicles have been currently used on a large scale. This paper reports the atmospheric methanol and isoproponal concentrations which were measured from May to December 1997, in Osaka, Japan, where alcohol fuel was not used and from 3 to 9 February 1998 in Sao Paulo, Brazil, where ethanol was used. The alcohols were determined by the alkyl nitrite formation reaction using gas chromatography (GC-ECD) analysis. The concentration of atmospheric alcohols, especially ethanol, measured in Sao Paulo were significantly higher than those in Osaka. In Osaka, the average concentrations of atmospheric methanol, ethanol, and isopropanol were 5.8 ± 3.8, 8.2 ± 4.6, and 7.2 ± 5.9ppbv, respectively. The average ambient levels of methanol, ethanol, and isopropanol measured in Sao Paulo were 34.1± 9.2, 176.3 ± 38.1, and 44.2 ± 13.7ppbv, respectively. The ambient levels of aldehydes, which were expected to be high due to the use of alcohol fuel, were also measured at these sampling sites. The atmospheric formaldehyde average measured in Osaka was 1.9± 0.9ppbv, and the average acetaldehyde concentration was 1.5 ± 0.8ppbv. The atmospheric formaldehyde and acetaldehyde average concentrations measured in Sao Paulo were 5.0 ± 2.8 and 5.4 ± 2.8ppbv, respectively. The C 2 H 5 OH/CH 3 OH and CH 3 CHO/HCHO were compared between the two measurement sites and elsewhere in the world, which have already been reported in the literature. Due to the use of ethanol-fuelled vehicles, these ratios, especially C-2H 5 OH/CH 3 OH, are much higher in Brazil than those measured elsewhere in the world. (Author)

Centro comercial Daiei Nakamozu Sakal Osaka – Japón

Directory of Open Access Journals (Sweden)

Takenaka Komuten Co., Ltd., Arquitectos e ingenieros

1974-11-01

Full Text Available This article gives a brief description of the lay out and essential characteristics of this Shopping Centre in Nakamozu-cho, Sakai, Osaka. It consists of two storeys and basement for the part to be used as a supermarket, shops and swimmingpool and of three storeys and basement in the bank section. The basement is used as a parking lot which together with the space above ground accommodates 1,200 units. A great contrasting effect is achieved by using reinforced concrete for the structure and glass for the roofs and the large vertical surfaces.Se describen brevemente en este artículo la distribución y características esenciales de este Centro Comercial, situado en Nakamozu-cho, Sakai, Osaka. Está constituido por dos plantas y sótano en la parte de supermercado, tiendas y piscina, y por tres plantas y sótano en la zona destinada a banco. El sótano está ocupado por un aparcamiento que, con las plazas de superficie, alcanza las 1.200 unidades. La construcción se ha realizado con estructuras de hormigón armado, contrastando con cubiertas y grandes superficies verticales acristaladas.

Hydrodynamic instability experiments on the HIPER laser facility at the Institute of Laser Engineering, Osaka University

International Nuclear Information System (INIS)

Shigemori, K.; Azechi, H.; Fujioka, S.

2003-01-01

We present recent results on the hydrodynamic instability experiments on the HIPER (High Intensity Plasma Experimental Research) laser facility at ILE, Osaka University. We measured the Rayleigh-Taylor growth rate on the HIPER laser. Also measured were all parameters that determine the RT growth rate. We focused on the measurements of the ablation density of laser-irradiated targets, which had not been experimentally measured. The experimental results were compared with calculations with one dimensional simulation coupled with Fokker-Planck equation for electron transport. (author)

Expo 70 - Osaka, Japón

Directory of Open Access Journals (Sweden)

Editorial, Equipo

1970-06-01

Full Text Available The following pavillions at the Expo-70 in Osaka are outstanding. The West German Exhibit, with a structure reminiscent of an astronomical observatory. The U.R.R.S. Pavillion, which is 109 m high, and has a tubular support. The Motor Car Industry Display, which involves two units and a tent like roof. The Festival Palace, within the representative zone of the Exhibition, and houses the official ceremonies in honour of the participating nations. The Tashida IHI Pavillion, whose structure includes the use of 1,338 interconnected tetrapods. The Takara Group Display, which is an abstract concept, consisting of a large number of cube space forms. The firm Takenaka Komuten Co. Ltd. has taken a very active part in the construction of 28 buildings, both Japanese and foreign.Destacan en la EXPO-70 los siguientes pabellones: el pabellón de la Alemania Occidental, con su estructura en forma de cúpula para observaciones astronómicas; el de la U.R.S.S., de 109 m de altura y estructura tubular; el de la Industria Automovilística, que consta de dos unidades y presenta una cubierta en forma de tienda de campaña; el palacio de Festivales, que forma parte de la zona representativa de la exposición; en él se desarrollan los actos dedicados a las naciones participantes; el pabellón Toshiba IHI, en cuya estructura se emplearon un total de 1.338 tetrápodos ensamblados; el pabellón del grupo Takara, diseñado con una concepción abstracta —a base de cubos—. La empresa «Takenaka Komuten, Co. Ltd.», ha intervenido eficazmente en la construcción de 28 pabellones, japoneses y extranjeros.

Effect of ferrous/ferric ions molar ratio on reaction mechanism for ...

Indian Academy of Sciences (India)

Wintec

Institute of Scientific and Industrial Research, Osaka University, 8-1 Mihogaoka, Ibaraki, Osaka 567-0047, Japan. MS received 25 ... methods, a mixed aqueous solution of Fe. 2+ ... (Quantum Design model MPMS) at a magnetic field of. 100 Oe ...

Radon concentration, absorbed dose rate in air and concentration of natural radionuclides in soil in the Osaka district of Japan

International Nuclear Information System (INIS)

Megumi, K.; Matsunami, T.; Ishiyama, T.; Abe, M.; Kimura, S.; Yamazaki, K.; Tsujimoto, T.

1992-01-01

Radon concentrations in outdoor air at 18 sites in the Osaka district, in the central part of Japan's main island, were measured with electrostatic integrating radon monitors which were developed by Y Ikebe et al of the Osaka survey centre as part of a nationwide survey of radon indoors and outdoors in Japan conducted by the National Institute of Radiological Science. The mean radon concentration in outdoor air during 2-month periods was measured over a period of a year and a half. In addition, the absorbed dose rate in air and the concentration of natural radionuclides in soil were measured at 40 sites in Osaka Prefecture which is located in the central part of the Osaka district using thermoluminescence dosemeters and with gamma ray spectrometry, respectively. Radon concentration in outdoor air showed a seasonal pattern, reaching its maximum during the winter and its minimum during the summer, but this variation was not significant at the coastal sites. It was concluded that this variation is correlated with a seasonal wind which blows from the continental interior to the ocean in winter and in the opposite direction in summer, as well as with geographical factors. Radon concentration in outdoor air in the Osaka district ranged from 0.6 to 17.9 Bq.m -3 and mean annual radon concentration in outdoor air at the 18 sites ranged from 2.7 to 6.9 Bq.m -3 . It was discovered that radon concentration in outdoor air decreased with wind speed in both winter and summer. The absorbed dose rate in air ranged from 66 to 114 nGy.h -1 , and the concentration of 226 Ra in soil ranged from 20 to 60 Bq.kg -1 respectively. (author)

Fast ignition studies at Osaka University

International Nuclear Information System (INIS)

Tanaka, K. A.

2007-01-01

After the invention of the chirped pulse amplification technique [1], the extreme conditions of matters have become available in laboratory spaces and can be studied with the use of ultra intense laser pulse (UILP) with a high energy. One such example is the fast ignition [2] where UILP is used to heat a highly compressed fusion fuel core within 1-10 pico-seconds before the core disassembles. It is predicted possible with use of 50-100 kJ lasers for both imploding the fuel and heating [2] to attain a large fusion gain. Fast ignition was shown to be a promising new scheme for laser fusion [3] with a PW (= 10 1 5 W) UILP and GEKKO XII laser systems at Osaka. Many new physics have been found with use of UILP in a relativistic parameter regime during the process of the fast ignition studies. UILP can penetrate into over-dense plasma for a couple hundred microns distance with a self-focusing and relativistic transparency effects. Hot electrons of 1-100 MeV can be easily created and are under studies for its spectral and emission angle controls. Strong magnetic fields of 10's of MGauss are created to guide these hot electrons along the target surface [4]. Based on these results, a new and largest UILP laser machine of 10 kJ energy at PW UILP peak power is under construction to test if we can achieve the sub-ignition fusion condition at Osaka University. The machine requires challenging optical technologies such as large size (0.9 m) gratings, tiling these gratings for UILP compression; segmenting four large UILP beams to obtain diffraction limited focal spot. We would like to over-view all of these activities. References [1]D. STRICKLAND and G. MOUROU, Opt. Commun., 56, 219 (1985) [2] S. ATZENI et al., Phys Plasmas, 6, 3316 (1999) [3] R. KODAMA, K.A. TANAKA et al., Nature, 418, 933 (2002) [4] A.L. LEI, K.A. TANAKA et al., Phys. Rev. Lett., 96, 255006(2006) ; H. HABARA, K.A. TANAKA et al., Phys. Rev. Lett., 97, 095004 (2006)

The revision of the master's curiculm at Osaka Kyoiku University

OpenAIRE

赤松, 喜久; 伊藤, 敏雄

2007-01-01

The background covering the revision of the master's curriculum and a point concerning this revision in a teacher-training program at Osaka Kyoiku University are explained in this paper. Furthermore, future problems are organized and evaluated. The paper will help us to consider the revision of the curriculum expected as part of the master's course in a teacher's program. The number of required subjects is minimal so that a student may take more optional subjects to meet various needs. New su...

Fiscal 1974-1975 Sunshine Project research report. Hydrogen energy research results (National laboratories and institutes); 1974, 1975 nendo suiso energy kenkyu seika hokokushu. Kokuritsu shiken kenkyusho kankei

Energy Technology Data Exchange (ETDEWEB)

NONE

1976-10-01

This report summarizes the 21 research results on hydrogen energy promoted by 3 national laboratories and 2 national institutes. (1) Tokyo National Industrial Research Institute (TNIRI): Ca-I system, Mn system, S system and hybrid cycles, and water decomposition reaction by CO as thermochemical hydrogen production technique. (2) Osaka National Industrial Research Institute (ONIRI): Fe system, Cu system and ammonia system cycles, and high-temperature high-pressure water electrolysis. (3) Electrotechnical Laboratory: high- temperature direct thermolysis hydrogen production technique. (4) TNIRI: Mg-base and transition metal-base hydrogen solidification technique. (5) ONIRI: Ti-base and rare metal- base hydrogen solidification technique. (6) Mechanical Engineering Laboratory: hydrogen-fuel engines. (7) Electrotechnical Laboratory and ONIRI: fuel cell. (8) TNIRI: disaster preventive technology for gaseous and liquid hydrogen. (9) Chugoku National Industrial Research Institute: preventing materials from embrittlement due to hydrogen. (10) Electrotechnical Laboratory: hydrogen energy system. (NEDO)

Time series modelling of the Kobe-Osaka earthquake recordings

Directory of Open Access Journals (Sweden)

N. Singh

2002-01-01

generated by an earthquake. With a view of comparing these two types of waveforms, Singh (1992 developed a technique for identifying a model in time domain. Fortunately this technique has been found useful in modelling the recordings of the killer earthquake occurred in the Kobe-Osaka region of Japan at 5.46 am on 17 January, 1995. The aim of the present study is to show how well the method for identifying a model (developed by Singh (1992 can be used for describing the vibrations of the above mentioned earthquake recorded at Charters Towers in Queensland, Australia.

Annual report of Laboratory of Nuclear Studies, Osaka University, 1980

International Nuclear Information System (INIS)

1981-01-01

This is the progress report of the research activities in the Laboratory of Nuclear Studies during the period from April, 1980, to March, 1981. The activities were carried out by the OULNS staffs and also by outsiders at the OULNS. In this period, the X-ray astrophysics group, the radiation physics group and the high energy physics group joined the OULNS. The main accelerators in the OULNS are a 110 cm variable energy cyclotron and a 4.7 MeV Van de Graaff machine. The detailed experimental studies on inbeam e-gamma spectroscopy and beta-decay were carried out at two accelerator laboratories. The radiochemistry facility and a mass spectrometer were fully used. The research activities extended to high energy physics by utilizing national facilities, such as a 230 cm cyclotron in the Research Center for Nuclear Physics and a proton synchrotron in the National Laboratory for High Energy Physics. The theoretical studies on elementary particles and nuclear physics were carried out also. It is important that the facilities in the OULNS were used by the outsiders in Osaka University, such as solid state physics group and particle-induced X-ray group. The activities of the divisions of cyclotron, Van de Graaff, high energy physics, accelerator development and nuclear instrumentation, mass spectroscopy, radioisotope, solid state and theoretical physics are reported. (Kako, I.)

Prevalence of bile duct cancer among printing industry workers in comparison with other industries.

Science.gov (United States)

Okamoto, Etsuji; Kikuchi, Kiyotaka; Endo, Ginji

2013-01-01

The aim of this study was to assess the risk of developing bile duct cancer among workers in the other printing industry in comparison with workers in all industries in general. Prevalence of bile duct cancer was compared between workers in the printing industry and age-standardized controls in all other industries using the claims database of the Japan Health Insurance Association, which insures workers of small-medium sized employers of all industries. Young (aged 30-49) male workers in the printing industry showed an elevated but insignificant standardized prevalence rate ratio (SPRR) for bile duct cancer in comparison with workers in all other industries (SPRR: 1.78; 95%CI: 0.63-5.00). The risk was higher for intrahepatic bile duct cancer but remained insignificant (SPRR: 3.03; 95%CI: 0.52-17.56). The sharply elevated risk of bile duct cancer observed among proof-printing workers of a printing factory in Osaka may not be generalizable to workers in the printing industry nationwide.

Verification and Improvement of the Three-Dimensional Basin Velocity Structure Model in the Osaka Sedimentary Basin, Japan Using Interstation Green's Functions and H/V Spectral Ratios of Microtremors

Science.gov (United States)

Asano, K.; Iwata, T.; Sekiguchi, H.; Somei, K.; Nishimura, T.; Miyakoshi, K.; Aoi, S.; Kunugi, T.

2012-12-01

The Osaka sedimentary basin is filled by the Plio-Pleistocene Osaka group, terrace deposits, and alluvium deposits with thickness of 1 to 2 km over the bedrock, and it is surrounded by active fault systems. The Uemachi active fault system underlies the Osaka urban area. In order to predict the strong ground motions for future events of the Uemachi fault and others, the precise basin velocity structure model is indispensable as well as the detailed source fault model. The velocity structure of the Osaka basin has been extensively investigated by using various techniques such as gravity anomaly measurements, reflection surveys, boring explorations, and microtremor measurements. Based on these surveys and ground motion simulations for observed events, the three-dimensional velocity structure models of the Osaka basin have been developed and improved for decades (e.g., Kagawa et al., 1993; Horikawa et al., 2003; Iwata et al., 2008; Iwaki and Iwata, 2011). Now we are trying to verify the velocity structure model of the Osaka basin and to improve it incorporating new data sets. We have conducted two kinds of observations in the Osaka basin. The first observation is continuous microtremor observation. We have temporarily installed three-component velocity sensors at 15 sites covering the Osaka basin to record microtremors continuously for more than one year. The seismic interferometry technique (e.g. Shapiro and Campillo, 2004) is applied to retrieve interstation Green's function for analyzing the wave propagation characteristics inside the sedimentary basin. Both Rayleigh- and Love-wave type signals are identified in 0.1-0.5 Hz from observed interstation Green's functions. The group velocities of Rayleigh and Love waves propagating between two stations are estimated from them using the multiple filter analysis method, and they are compared with the theoretical group-velocities of the model. For example, estimated Love-wave group velocity along a line inside the basin is

Development of Osaka gas type planar SOFC

Energy Technology Data Exchange (ETDEWEB)

Iha, M.; Shiratori, A.; Chikagawa, O. [Murata Mfg. Co., Ltd., Shiga (Japan)] [and others

1996-12-31

Osaka Gas Co. has been developing a planar type SOFC (OG type SOFC) which has a suitable structure for stacking. Murata Mfg. Co. has begun to develop the OG type SOFC stack through joint program since 1993. Figure 1 shows OG type cell structure. Because each cell is sustained by cell holders acting air manifold, the load of upper cell is not put on the lower cells. Single cell is composed of 3-layered membrane and LaCrO{sub 3} separator. 5 single cells are mounted on the cell holder, connected with Ni felt electrically, and bonded by glassy material sealant. We call the 5-cell stack a unit. Stacking 13 units, we succeeded 870 W generation in 1993. But the power density was low, 0.11 Wcm{sup -2} because of crack in the electrolyte and gas leakage at some cells.

Design research and industrial applicability

DEFF Research Database (Denmark)

Andreasen, Mogens Myrup

1997-01-01

Imprinted paper (copies of overheads in English) on the nature of design research, the transformation process for industrial utilization and the challenges of ENDREA from industry.......Imprinted paper (copies of overheads in English) on the nature of design research, the transformation process for industrial utilization and the challenges of ENDREA from industry....

[TUBERCULOSIS SCREENING BY CHEST RADIOGRAPHY AMONG INTERNATIONAL STUDENTS AT JAPANESE LANGUAGE SCHOOLS IN OSAKA CITY].

Science.gov (United States)

Tsuda, Yuko; Matsumoto, Kenji; Komukai, Jun; Furukawa, Kanae; Saito, Kazumi; Shimouchi, Akira

2015-10-01

With a broader aim of controlling pulmonary tuberculosis (TB) among foreigners, here, we have reported the findings of chest radiography screening for TB among international students at Japanese language schools in Osaka city. Between April 2011 and December 2013, 4,529 international students from 19 Japanese language schools in Osaka city underwent chest radiography for TB screening. The chest radiographs were studied in reference to the student's sex, age, nationality, and date of entry to Japan as well as any health conditions present at the time of screening. We further analyzed the bacterial information and pulmonary TB classification based on chest radiography findings of students who were identified to be positive for TB. Information on the implementation of health education was also gathered. The results revealed that 52.5% of the students who underwent chest radiography came from China, 20.3 % from South Korea, and 16.3% from Vietnam. Of the students, 52.9% were male and 47.1% were female. The median age of students was 23 years (range: 14-70 years). The median number of days from the first date of entry to Japan up until the radiography screening was 63 days. Based on the chest radiography findings, 71 students (1.6%) were suspected to have TB; however, further detailed examination confirmed that 19 students (0.4%) had active TB. This percentage is significantly higher than the 0.1% TB identification rate among residents in Osaka city of the same time period (Pschools (for a total of 12 times) in the 3-year period. A total of 257 language school staff and students attended the health education seminars. The identification rate of TB positive students in Japanese language schools was higher than that of the general residents in Osaka city. In addition, most of these students came to Japan within 1 year. It is also important to note that the majority of TB positive students had sputum smear negative results. This study proves that medical examination after

Muon Beamline Commissioning and Feasibility Study for μSR at a New DC Muon Beamline, MuSIC-RCNP, Osaka University

Science.gov (United States)

Tomono, Dai; Fukuda, Mitsuhiro; Hatanaka, Kichiji; Higemoto, Wataru; Kawashima, Yoshitaka; Kojima, Kenji M.; Kuno, Yoshitaka; Matsuda, Yugo; Matsuzaki, Teiichiro; Miyake, Yasuhiro; Miyamoto, Koichiro; Morita, Yasuyuki; Motoishi, Takahiro; Nakazawa, Yu; Ninomiya, Kazuhiko; Nishikawa, Ryo; Ohta, Saki; Sato, Akira; Shimomura, Koichiro; Takahisa, Keiji; Weichao, Yao; Wong, Ming L.

At the new DC muon beamline MuSIC at Research Center for Nuclear Physics (RCNP), Osaka University, the beamline construction from the solenoid system of the muon production to the experimental port was completed. A beamline commissioning and a feasibility study for μSR are now in progress. With newly refurbished spectrometer installed at the experimental port, we succeeded in observing μSR spectra and μ-e decay asymmetry in a simple setup down to 4 K. We are still under development of other μSR appratuses.

Long-period Ground Motion Characteristics Inside and Outside of the Osaka Basin during the 2011 Great Tohoku Earthquake and Its Largest Aftershock

Science.gov (United States)

Sato, K.; Iwata, T.; Asano, K.; Kubo, H.; Aoi, S.

2013-12-01

The 2011 great Tohoku earthquake (Mw 9.0) occurred on March 11, 2011, and the largest aftershock (Mw 7.7) at the region adjacent to south boundary of the mainshock's source region. Long-period ground motions (1-10s) of large amplitude were observed in the Osaka sedimentary basin about 550-800km away from the source regions during both events. We studied propagation and site characteristics of these ground motions, and found some common features between these two events in the Osaka basin. (1) The amplitude of horizontal components of the ground motion at the site-specific period is amplified at each sedimentary station. The predominant period is around 7s in the bayside area where the largest pSv were observed. (2) The velocity Fourier spectra have their peak values around 7s at the bedrock sites surrounding the Osaka basin. (3) Two remarkable wave packets separated by 30s propagating from stations around the Nobi plain to the bedrock sites near the Osaka basin were seen in the pasted-up velocity waveforms from the source regions to the Osaka basin for both events (Sato et al., 2012). Therefore, large long-period ground motions in the Osaka basin are generated by the combination of propagation-path and basin effects. Firstly, we simulate ground motions due to the largest aftershock using three-dimensional FDM (GMS; Aoi and Fujiwara, 1999). The reason we focus on the largest aftershock is that this event has a relatively small rupture area and simple rupture process compared to the mainshock. The source model is based on the model estimated by Kubo et al. (2013). The velocity structure model is a three-dimensional velocity structure based on the Japan Integrated Velocity Structure Model (Koketsu et al., 2012) and the layer of Vs 350m/s in this model is replaced with one of Vs 500m/s. The minimum effective period in this computation is 3s. Then, we compare synthetic waveforms with observed ones. At CHBH14, the nearest station to the source and 60km away from the

Strengthening industry-research linkage for small scale industrial ...

African Journals Online (AJOL)

Strengthening industry-research linkage for small scale industrial development in Ghana - the relevance of scientific and technological information. ... Journal of Applied Science and Technology. Journal Home · ABOUT · Advanced Search ...

Research and development and industrial informatization

International Nuclear Information System (INIS)

1995-08-01

This book deals with research and development and industrial informatization with development of technology international trend, the present conditions of scientific technology in the major nations, politics of technical development and trend, process of national research and development, research for industrial research and development, strengthen cooperation for scientific technology among nations, current situation and development of technology by field such as energy, software and system, and technology for industrial informatization.

Standardization of an irradiation field using 60Co and 137Cs sources (at Radioisotope Research Centre of Osaka University)

International Nuclear Information System (INIS)

Yamaguchi, Y.; Yamashito, J.; Yamamoto, T.; Yamamoto, J.; Nomura, T.

1996-01-01

On the occasion of installing the γ-ray irradiation system for animal experiments at the Radioisotope Research Center of Osaka University both lead collimators and shield screen have been supplemented to the system in order to satisfy the Japanese legal regulation that the dose equivalent rate outside the controlled area should be less than 300 μSv/w because the experimental room has not been so designed as to install such an apparatus. The original use of the system is to study the internal β-ray exposure of a small animal on a dosage of tritium water, which will be eliminated from a body with a biological half-life. Accordingly, the dose rate of internal exposure due to β-ray will change with time, and hence such a situation could be simulated with an external exposure due to γ-rays by changing the dose rate spatially, that is, the distance between the γ-ray source and a sample. It is, however, anticipated that improvement of the system would bring increase in the scattered γ-rays at an irradiation point and hence it becomes the purpose of the present paper to obtain precise exposures including scattered γ-rays at each irradiation point for animal experiments and also to find an optimum point for standard calibration where no scattered γ-rays are observed. For that purpose the effect of them will be evaluated with both calculations due to the Monte Carlo code for neutron photon transport (MCNP) and experiments due to the ionization chamber calibrated at the National Bureau of Standard in Japan. (author)

Sex differences in lung cancer survival: long-term trends using population-based cancer registry data in Osaka, Japan.

Science.gov (United States)

Kinoshita, Fukuaki Lee; Ito, Yuri; Morishima, Toshitaka; Miyashiro, Isao; Nakayama, Tomio

2017-09-01

Several studies of sex differences in lung cancer survival have been reported. However, large-size population-based studies based on long-term observation are scarce. We investigated long-term trends in sex differences in lung cancer survival using population-based cancer registry data from Osaka, Japan. We analyzed 79 330 cases from the Osaka Cancer Registry (OCR) diagnosed between 1975 and 2007. We calculated 5-year relative survival in the six periods (1975-1980, 1981-1986, 1987-1992, 1993-1997, 1998-2002 and 2003-2007). To estimate the trends in sex differences in lung cancer survival throughout the study period, we applied a multivariate excess hazard model to control for confounders. The proportion of adenocarcinoma (ADC) and 5-year relative relative survival have increased for both sexes. Sex differences in lung cancer survival have widened over the period, especially in ADC and since the late 1990s. The excess hazard ratio of death within 5 years for males was 1.19 (95% CI: 1.16-1.21), adjusting for period at diagnosis, histologic type, stage, age group and treatment. We reported that females have better prognosis in lung cancer than males and the sex differences in lung cancer survival have become wider in Osaka, Japan. This can be partly explained by the sex differences in the proportions of histologic type and stage. Further studies considering other factors that influence sex differences in lung cancer survival are needed. © The Author 2017. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

Mock-up experiment at Birmingham University for BNCT project of Osaka University – Neutron flux measurement with gold foil

International Nuclear Information System (INIS)

Tamaki, S.; Sakai, M.; Yoshihashi, S.; Manabe, M.; Zushi, N.; Murata, I.; Hoashi, E.; Kato, I.; Kuri, S.; Oshiro, S.; Nagasaki, M.; Horiike, H.

2015-01-01

Mock-up experiment for development of accelerator based neutron source for Osaka University BNCT project was carried out at Birmingham University, UK. In this paper, spatial distribution of neutron flux intensity was evaluated by foil activation method. Validity of the design code system was confirmed by comparing measured gold foil activities with calculations. As a result, it was found that the epi-thermal neutron beam was well collimated by our neutron moderator assembly. Also, the design accuracy was evaluated to have less than 20% error. - Highlights: • Accelerator based neutron source for BNCT is being developed in Osaka University. • Mock-up experiment was carried out at Birmingham University, UK. • Neutronics performance of our assembly was evaluated from gold foil activation. • Gold foil activation was determined by using HPGe detectors. • Validity of the neutronics design code system was confirmed.

Research partnerships between business researchers and industry

NARCIS (Netherlands)

Zalewska-Kurek, Katarzyna; Janßen, Björn; Harms, Rainer

2016-01-01

We study the strategic behaviour of management researchers when establishing research partnerships with industry. To this end we developed a framework distinguishing ‘strategic planned’ and ‘opportunity-driven’ behaviour in the process of establishing and managing research partnerships. We also

Radioactive caesium contamination due to Fukushima Daiichi Nuclear Power Plants accident in Osaka city. Evaluation of accumulation and decontamination of radioactive materials via reverse logistics function of a city

International Nuclear Information System (INIS)

Nishio, Takayuki; Kitano, Masaaki; Sakai, Mamoru; Takakura, Akito; Katahira, Kenshi; Nishitani, Takashi

2015-01-01

We surveyed background level of radioactive contamination in city area of Osaka before combusting the wide area disposal of disastrous debris at a municipal waste incineration plant of Osaka city. The debris was caused by Tohoku district great earthquake disaster and suspected to be contaminated with radionuclides released from the Fukushima Daiichi Nuclear Power Plants. We also investigated radioactivity in incineration ash of municipal waste incineration plants and of sewage treatment plants, as well as in water clarifier sludge of potable water treatment plants, and evaluated the accumulation and cleansing of radioactive materials via the reverse logistic function of the city. Radioactive caesium deposited in Osaka city area was estimated to be approximately 4.3 GBq from the concentrations observed in the monthly fallout, whereas that collected as municipal wastes and sewage was estimated to be approximately 0.9 GBq a year in 2011. Even two years after the accident, "1"3"4Cs, which is the evidence of the Fukushima Daiichi Nuclear Power Plant accident, had been detected in the municipal wastes at a level comparable to the activities found just after the accident, however, the radioactive caesium concentration in fallout measured in the Osaka city area had decreased below a detection limit after May 2012. Introduction of materials contaminated with radioactive caesium from outside the city area was suspected because the observed contamination level was inexplicable by that of observed in the environmental wastes such as pruned branches which are contaminated by with the fallout in city area of Osaka. (author)

Measurement of Rn-222 concentration in underground water in Osaka stratum group in Sennan area

International Nuclear Information System (INIS)

Fukui, Masami; Katsurayama, Kosuke

1977-01-01

The Rn-222 concentration in underground water is reported as follows, which is the result obtained when the ground inspection was carried out in the Research Reactor Institute of Kyoto University located at Kumatori area in Osaka stratum group. Underground water, at different depth, well water and rain water were taken, and the contained Rn-222 was extracted with toluene to measure by liquid scintillation technique. Rn-222 concentration in rain water was 3.5 - 8.0 pCi/l, while the concentration in well water was 130 - 250 pCi/l, and that in underground water was 240 - 313 pCi/l. The seasonal change, geographical difference and variation according to depth of Rn-222 concentration were examined. Rn-222 behavior in soil should be investigated more in detail in reference to Rn-222 dispersion, transport and equilibrium problems in soil-water system in the future. (Kobatake, H.)

Industry sponsorship and research outcome

DEFF Research Database (Denmark)

Lundh, Andreas; Lexchin, Joel; Mintzes, Barbara

2017-01-01

BACKGROUND: Clinical research affecting how doctors practice medicine is increasingly sponsored by companies that make drugs and medical devices. Previous systematic reviews have found that pharmaceutical-industry sponsored studies are more often favorable to the sponsor's product compared...... on the association between sponsorship and research outcome. OBJECTIVES: To investigate whether industry sponsored drug and device studies have more favorable outcomes and differ in risk of bias, compared with studies having other sources of sponsorship. SEARCH METHODS: In this update we searched MEDLINE (2010......, systematic reviews and meta-analyses that quantitatively compared primary research studies of drugs or medical devices sponsored by industry with studies with other sources of sponsorship. We had no language restrictions. DATA COLLECTION AND ANALYSIS: Two assessors screened abstracts and identified...

'Radiation Fair' for 15 years in Osaka, Japan, and survey of the participants attitude toward radiation

International Nuclear Information System (INIS)

Furuta, Masakazu; Asano, Takeyoshi; Hayashi, Toshio; Hosokawa, Yasushi; Kakefu, Tomohisa; Nishihara, Hideaki

1999-01-01

We have been successfully operating 'Radiation Fair--The relationship between daily life and radiation--' during summer vacation season in August every year for 15 years in Osaka, the largest city of western Japan. The purpose of this event is radiation education of public including school kids through efficient information transfer of radiation and radiation-related technology. Currently we set up the space of it on a floor of Kintetsu Department Store, one of the major department stores in downtown Osaka and display various irradiated products available in our daily life together with explanatory panels. We have been devising various attractions as efficient information transfer media so that even elementary-school kids understand the basic knowledge of radiation and irradiation technologies. The number of participants has increased year by year until more than 20,000 in recent years. We distributed questionnaires to the visitors for recent 3 years to inquire their status toward radiation and irradiated products as well as impression toward the displays. The survey results suggest that school education may contribute to establish the public image toward 'radiation' as well as mass media. (author)

Industrial Technologies Program Research Plan for Energy-Intensive Process Industries

Energy Technology Data Exchange (ETDEWEB)

Chapas, Richard B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Colwell, Jeffery A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2007-10-01

In this plan, the Industrial Technologies Program (ITP) identifies the objectives of its cross-cutting strategy for conducting research in collaboration with industry and U.S. Department of Energy national laboratories to develop technologies that improve the efficiencies of energy-intensive process industries.

Orthopaedic research and education foundation and industry.

Science.gov (United States)

Wurth, Gene R; Sherr, Judy H; Coffman, Thomas M

2003-07-01

Members of orthopaedic industry commit a significant amount of funds each year to support research and education programs that are directly related to their product(s). In addition, industry supports organizations such as the Orthopaedic Research and Education Foundation. The relationship between the Orthopaedic Research and Education Foundation and industry began in the early 1980s. The support to the Orthopaedic Research and Education Foundation from industry primarily has come in the form of unrestricted grants. These grants best can be looked at as an investment rather than a contribution. This form of giving, once called corporate philanthropy is more accurately referred to as strategic philanthropy. Members of industry make these investments to enhance their reputations, build brand awareness, market their products and services, improve employee morale, increase customer loyalty, and establish strategic alliances. The specialty of orthopaedics is among the leaders in medicine in the amount of funding raised within the specialty for research and education programs. This is because of the amount of support from members of industry and the surgeons. During the past 15 years, 40% of the annual support to the Orthopaedic Research and Education Foundation has come from industry and the balance has come from surgeons and members of lay public. Future industry support of the Orthopaedic Research and Education Foundation and other organizations within the specialty of orthopaedics will be dependent on the continued demonstration of tangible returns in areas described.

Modeling of Wave Propagation in the Osaka Sedimentary Basin during the 2013 Awaji Island Earthquake (Mw5.8)

Science.gov (United States)

Asano, K.; Sekiguchi, H.; Iwata, T.; Yoshimi, M.; Hayashida, T.; Saomoto, H.; Horikawa, H.

2013-12-01

The three-dimensional velocity structure model for the Osaka sedimentary basin, southwest Japan is developed and improved based on many kinds of geophysical explorations for decades (e.g., Kagawa et al., 1993; Horikawa et al., 2003; Iwata et al., 2008). Recently, our project (Sekiguchi et al., 2013) developed a new three-dimensional velocity model for strong motion prediction of the Uemachi fault earthquake in the Osaka basin considering both geophysical and geological information by adding newly obtained exploration data such as reflection surveys, microtremor surveys, and receiver function analysis (hereafter we call UMC2013 model) . On April 13, 2013, an inland earthquake of Mw5.8 occurred in Awaji Island, which is close to the southwestern boundary of the aftershock area of the 1995 Kobe earthquake. The strong ground motions are densely observed at more than 100 stations in the basin. The ground motion lasted longer than four minutes in the Osaka urban area where its bedrock depth is about 1-2 km. This long-duration ground motions are mainly due to the surface waves excited in this sedimentary basin whereas the magnitude of this earthquake is moderate and the rupture duration is expected to be less than 5 s. In this study, we modeled long-period (more than 2s) ground motions during this earthquake to check the performance of the present UMC2013 model and to obtain a better constraint on the attenuation factor of sedimentary part of the basin. The seismic wave propagation in the region including the source and the Osaka basin is modeled by the finite difference method using the staggered grid solving the elasto-dynamic equations. The domain of 90km×85km×25.5km is modeled and discretized with a grid spacing of 50 m. Since the minimum S-wave velocity of the UMC2013 model is about 250 m/s, this calculation is valid up to the period of about 1 s. The effect of attenuation is included in the form of Q(f)=Q0(T0/T) proposed by Graves (1996). A PML is implemented in

Daily variation of I-131, Cs-134 and Cs-137 activity concentrations in the atmosphere in Osaka during the early phase after the FDNPP accident

International Nuclear Information System (INIS)

Zijian Zhang; Kazuhiko Ninomiya; Naruto Takahashi; Atsushi Shinohara

2015-01-01

To investigate the time variations of radionuclides discharged from the Fukushima Daiichi nuclear power plants accident, we started collecting aerosol samples in Osaka, Japan, using a high-volume sampler from March 15 to May 1, 2011. Atmospheric radioactivity concentrations of I-131, Cs-134 and Cs-137 were measured with germanium semi-conductor detectors. Only I-131 was detected in the early phase and two Cs-134.137 peaks were found in Osaka in April. Using the HYSPLIT model, we concluded that direct transportation of the air mass from the Fukushima area was responsible for such events. (author)

Industry-university collaboration for research and education

International Nuclear Information System (INIS)

Shalaby, B.A.; Snell, V.G.; Rouben, B.

2015-01-01

University Network for Excellence in Nuclear Engineering also known as UNENE is a joint partnership between the nuclear industry and thirteen universities. UNENE has been legally registered as of 2002 as a not for profit organization. The establishment of this network was prompted by industry to address anticipated retirement of a large number of professionals from industry starting in early 2000 onwards and thus the loss of nuclear knowledge and experience within industry. UNENE was created to provide a sustainable supply of highly qualified personnel to industry, support nuclear research within various universities and provide a course based Master's Degree in nuclear engineering to enhance the knowledge of young professionals within the industry in the science and technology of the CANDU nuclear power system. The paper describes the current UNENE, its research objectives, key outcomes of research programs to date and its contribution to industry needs in maintaining an economic and safe power plant performance of its nuclear fleet. The paper addresses achievements within the education program and the new 4-course diploma program recently introduced to enhance core expertise of young industry professionals. Also publications and national and international collaborations in various aspects of research have significantly contributed to Canada's position in nuclear science and research worldwide. Such collaborations are also addressed. (author)

Addressing Responsible Research and Innovation to Industry

DEFF Research Database (Denmark)

Yaghmaei, Emad

2015-01-01

Responsible research and innovation (RRI) is taking a role to assist all types of stakeholders including industry to move research and innovation initiatives to responsible manner for tackling grand challenges. The literature on RRI focuses little on how industry can implement RRI principles...... models of corporate social responsibility (CSR) literature. Drawing on these models, this study develops stages and dimensions of RRI for discussing why industry should become engaged in RRI, how industry can embed RRI principles into research and innovation processes, how companies progress from one RRI....... In solving such gap in the literature, this article constructs a solid framework that provides a conceptual starting point for future research on levels of RRI. It draws a fundamental path to align industrial activities with environmental and societal needs. The framework develops a normatively grounded...

Survey report for fiscal 1998. Joint research project with researchers related to petroleum substituting energies in the EU countries; 1998 nendo EU shokoku no sekiyu daitai energy kanren kenkyusha tono kyodo kenkyu jigyo chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

It was intended to invite researchers related to petroleum substituting energies from the EU countries to perform joint researches at research organizations under the auspices of the Agency of Industrial Science and Technology having deep relations with research themes of the invited researchers, to deepen the mutual understanding, and to form efficient cooperative relationship. The intention is also to contribute to research and development of petroleum substituting energies to be used in Japan in the future. The research themes, researchers, their research organizations, and the receiving research organizations are as follows: (1) evaluation of reservoir impedance in high-temperature rock experimental fields by Mr. Ralph Weidler (Germany) at Ruhr University received by the Resource and Environmental Technology Research Institute; (2) changing the particle boundary structure of ceramics by using the alkoxide process by Dr. Ramon Torrecillas (Spain) at Institute Nacional del Carbon received by the Nagoya Industrial Technology Research Institute; (3) research on corrosion in metallic materials for molten carbonate type fuel cells by Dr. Giuseppe Calogero (Italy) at Institute for Transformation and Storage of Energy received by the Osaka Industrial Technology Research Institute; and (4) estimation of behavior of deep geothermal reservoirs with high enthalpy by Dr. Enrico Maranini at Universita' Di Ferrara received by the Geology Survey Center. (NEDO)

Industry-university collaboration for research and education

Energy Technology Data Exchange (ETDEWEB)

Shalaby, B.A.; Snell, V.G.; Rouben, B. [Univ. Network of Excellence in Nuclear Energy (UNENE), Ontario (Canada)

2015-09-15

University Network for Excellence in Nuclear Engineering also known as UNENE is a joint partnership between the nuclear industry and thirteen universities. UNENE has been legally registered as of 2002 as a not for profit organization. The establishment of this network was prompted by industry to address anticipated retirement of a large number of professionals from industry starting in early 2000 onwards and thus the loss of nuclear knowledge and experience within industry. UNENE was created to provide a sustainable supply of highly qualified personnel to industry, support nuclear research within various universities and provide a course based Master's Degree in nuclear engineering to enhance the knowledge of young professionals within the industry in the science and technology of the CANDU nuclear power system. The paper describes the current UNENE, its research objectives, key outcomes of research programs to date and its contribution to industry needs in maintaining an economic and safe power plant performance of its nuclear fleet. The paper addresses achievements within the education program and the new 4-course diploma program recently introduced to enhance core expertise of young industry professionals. Also publications and national and international collaborations in various aspects of research have significantly contributed to Canada's position in nuclear science and research worldwide. Such collaborations are also addressed. (author)

Industry-university collaboration for research and education

Energy Technology Data Exchange (ETDEWEB)

Shalaby, B.A.; Snell, V.G.; Rouben, B., E-mail: basma.shalaby@rogers.com [University Network of Excellence in Nuclear Energy, Hamilton, ON (Canada)

2015-07-01

University Network for Excellence in Nuclear Engineering also known as UNENE is a joint partnership between the nuclear industry and thirteen universities. UNENE has been legally registered as of 2002 as a not for profit organization. The establishment of this network was prompted by industry to address anticipated retirement of a large number of professionals from industry starting in early 2000 onwards and thus the loss of nuclear knowledge and experience within industry. UNENE was created to provide a sustainable supply of highly qualified personnel to industry, support nuclear research within various universities and provide a course based Master's Degree in nuclear engineering to enhance the knowledge of young professionals within the industry in the science and technology of the CANDU nuclear power system. The paper describes the current UNENE, its research objectives, key outcomes of research programs to date and its contribution to industry needs in maintaining an economic and safe power plant performance of its nuclear fleet. The paper addresses achievements within the education program and the new 4-course diploma program recently introduced to enhance core expertise of young industry professionals. Also publications and national and international collaborations in various aspects of research have significantly contributed to Canada's position in nuclear science and research worldwide. Such collaborations are also addressed. (author)

Research and Exploration for Operational Research Education in Industry and Engineering Subject

Science.gov (United States)

Wu, Yu-hua; Wang, Feng-ming; Du, Gang

2007-01-01

On the basic of exploring the relationship of industry engineering and operational research technique, the thesis analyzes the location and utility of the operational research education in the whole industry engineering subject education. It brings forward the system design about operational research and relative class among industry engineering…

Performance management of nuclear medical apparatuses in Osaka University Hospital

International Nuclear Information System (INIS)

Ikehara, Katsuhiro; Kusumi, Yoshimi; Hayashi, Makoto; Miharu, Tomoyoshi; Masuda, Kazutaka

1975-01-01

Nuclear medical out side-body measuring equipments in Osaka University Hospital consist of scinticamera, scintiscanner and movement-measuring equipment as measuring equipments, and central processing equipment, CRT attached with Polaroid camera, data typewriter, X-Y recorder, and high speed tape reader as data processing equipments. Daily and monthly management items are set up to maintain the best function of these equipments. The data processing room is air-conditioned to keep temperature at 25 0 C and humidity at 60% constantly, and they are confirmed with a temperature and humidity self-recorder. Computer system is used for the homogeneity control and the correction to counting failure of the scinticamera. As the repair of nuclear medical apparatuses needs long period and because of the special circumstances of radioactive drugs, very close cooperation among technicians, doctors and equipment makers is required. (Kobatake, H.)

Research advances in industrial engineering

CERN Document Server

2015-01-01

This book provides discussions and the exchange of information on principles, strategies, models, techniques, methodologies and applications of industrial engineering. It communicates the latest developments and research activity on industrial engineering and is useful for all those interested in the technological challenges in the field.

Advances of energy drivers at Osaka

International Nuclear Information System (INIS)

Kato, Yoshiaki; Nakai, Sadao; Yamanaka, Chiyoe.

1979-01-01

The energy driver development at the Institute of Laser Engineering (ILE), Osaka University, comprises three fields; glass, laser, carbon dioxide laser, and relativistic electron beam. The development of reliable glass lasers has been the main program at ILE. The GEKKO 12 module program was carried out in the fiscal years from 1977 to 1979 in order to develop various laser components and subsystems which are necessary to construct a 20 kJ GEKKO 12 glass laser. The measured gain coefficient of the 200 mm disk amplifier was 0.10/cm corresponding to the αD product of 4.0. The expected peak output power of the system was 2 TW at 0.1 ns and 0.9 kJ at 1 ns. The recent advances in coating techniques will enable to operate this system over 1.3 kJ per beam at 3 ns. Carbon dioxide lasers have been developed as efficient high energy lasers to study the wave length scaling of implosion process. The design and construction of the 10 kJ LEKKO 8 laser system are in progress. Relativistic electron beam machines, being the most cost-effective driver, have been studied to control pulsed power and to investigate electron beam plasma interaction. As the future plans of ILE, the construction of a 100 kJ energy driver from 1958 to 1987 for scientific break-even experiments is considered. (Kato, T.)

Between science and industry-applied yeast research.

Science.gov (United States)

Korhola, Matti

2018-03-01

I was fortunate to enter yeast research at the Alko Research Laboratories with a strong tradition in yeast biochemistry and physiology studies. At the same time in the 1980s there was a fundamental or paradigm change in molecular biology research with discoveries in DNA sequencing and other analytical and physical techniques for studying macromolecules and cells. Since that time biotechnological research has expanded the traditional fermentation industries to efficient production of industrial and other enzymes and specialty chemicals. Our efforts were directed towards improving the industrial production organisms: minerals enriched yeasts (Se, Cr, Zn) and high glutathione content yeast, baker´s, distiller´s, sour dough and wine yeasts, and the fungal Trichoderma reesei platform for enzyme production. I am grateful for the trust of my colleagues in several leadership positions at the Alko Research Laboratories, Yeast Industry Platform and at the international yeast community.

Exchange of researchers of oil substituting energies in EU countries; EU shokoku no sekiyu daitai energy kenkyusha koryu jigyo

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

In order to further promote smoother introduction of oil substituting energies and development of new energies and energy saving technologies, it was intended to exchange and acquire items of information effective to learn the current state and policy trends on research and development of new energies and energy conservation in the EU countries who are the industrialized countries like Japan and enthusiastic in developing oil substituting energies. Therefore, exchange of researchers was carried out with an objective to contribute to research and development of oil substituting energies by deepening mutual understanding on the development efforts and forming efficient cooperative relationship. The researchers who visited Japan are Dr. Robert Durand (France) and Prof. and Dr. Bruno Scrosati (Italy). Dr. Durand has a great knowledge about fuel cells and storage batteries, and Dr. Scrosati about electrolytes and lithium batteries. Both gentlemen have visited the Agency of Industrial Science and Technology and the Agency of Natural Resources and Energy of the Ministry of International Trade and Industry, NEDO, Toshiba, Sony, Sanyo Electric, Japan Storage Battery, Matsushita Battery Industry, the Industrial Technology Research Institute of Osaka, and Kansai Electric Power Company. Views and information were exchanged and a number of good results were rewarded.

Industry-identified combustion research needs: Special study

Energy Technology Data Exchange (ETDEWEB)

Keller, J.G.; Soelberg, N.R.; Kessinger, G.F.

1995-11-01

This report discusses the development and demonstration of innovative combustion technologies that improve energy conservation and environmental practices in the US industrial sector. The report includes recommendations by industry on R&D needed to resolve current combustion-related problems. Both fundamental and applied R&D needs are presented. The report assesses combustion needs and suggests research ideas for seven major industries, which consume about 78% of all energy used by industry. Included are the glass, pulp and paper, refinery, steel, metal casting, chemicals, and aluminum industries. Information has been collected from manufacturers, industrial operators, trade organizations, and various funding organizations and has been supplemented with expertise at the Idaho National Engineering Laboratory to develop a list of suggested research and development needed for each of the seven industries.

Office of Industrial Technologies research in progress

Energy Technology Data Exchange (ETDEWEB)

1993-05-01

The US Department of Energy (DOE) Office of Industrial Technologies (OIT) conducts research and development activities which focus on improving energy efficiency and providing for fuel flexibility within US industry in the area of industrial conservation. The mission of OIT is to increase the utilization of existing energy-efficient equipment and to find and promote new, cost-effective ways for industrial facilities to improve their energy efficiency and minimize waste products. To ensure advancement of the technological leadership of the United States and to improve the competitiveness of American industrial products in world markets, OIT works closely with industrial partners, the staffs of the national laboratories, and universities to identify research and development needs and to solve technological challenges. This report contains summaries of the currently active projects supported by the Office of Industrial Technologies.

2nd Industry-Academia Research Exchange Conference. Research report for fiscal 1992; Dai 2 kai sangaku kenkyu koryukai. 1992 nendo kenkyu hokoku

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-06-24

The above-named conference was convened on June 24, 1993, hosted by the Photovoltaic Power Generation Technology Research Association. The research achievement reports made at the event were 'Thermodynamic evaluation of boron in silicon' by Professor Sano of Tokyo University, 'Solar cell system payback time' by Professor Komiyama of Tokyo University, 'Delta-doped amorphous silicon solar cell' by Professor Konagai of Tokyo Institute of Technology, 'Interaction of silicon thin film and atom-state hydrogen' by Professor Shimizu of Tokyo Institute of Technology, 'Simulation of solar module characteristics' by Professor Saito of Tokyo University of Agriculture and Technology, 'Manufacture of CuInSe{sub 2} thin film for solar cell' by Professor Kunioka of Aoyama Gakuin University, 'Solar cell material/process characterization by use of photoluminescence surface state spectroscopy' by Professor Hasegawa of Hokkaido University, 'Research on tandem solar cell using compound-on-silicon semiconductor crystal' by Professor Umeno of Nagoya University, and 'Efficiency improvement in amorphous Si/polycrystalline Si tandem solar cell' by Professor Hamakawa of Osaka University. (NEDO)

'Radiation Fair' for 15 years in Osaka, Japan, and survey of the participants attitude toward radiation

Energy Technology Data Exchange (ETDEWEB)

Furuta, Masakazu; Asano, Takeyoshi; Hayashi, Toshio; Hosokawa, Yasushi [Research Institute for Advanced Science and Technology, Osaka Prefecture Univ., Sakai, Osaka (Japan); Kakefu, Tomohisa; Nishihara, Hideaki

1999-09-01

We have been successfully operating 'Radiation Fair--The relationship between daily life and radiation--' during summer vacation season in August every year for 15 years in Osaka, the largest city of western Japan. The purpose of this event is radiation education of public including school kids through efficient information transfer of radiation and radiation-related technology. Currently we set up the space of it on a floor of Kintetsu Department Store, one of the major department stores in downtown Osaka and display various irradiated products available in our daily life together with explanatory panels. We have been devising various attractions as efficient information transfer media so that even elementary-school kids understand the basic knowledge of radiation and irradiation technologies. The number of participants has increased year by year until more than 20,000 in recent years. We distributed questionnaires to the visitors for recent 3 years to inquire their status toward radiation and irradiated products as well as impression toward the displays. The survey results suggest that school education may contribute to establish the public image toward 'radiation' as well as mass media. (author)

Industrial research enhancement program at the National Synchrotron Light Source

International Nuclear Information System (INIS)

Wang Jun; Nasta, Kathleen; Kao, Chi-Chang

2011-01-01

Industrial research has attracted more and more attention recently at synchrotron facilities. Bringing the state-of-the-art research capabilities provided by these facilities to the industrial user community will help this community to improve their products and processing methods, to foster competition and build the economy. The National Synchrotron Light Source (NSLS) has a long and celebrated history in research partnerships with industry since its inception more than 25 years ago, and both industry and the facility have benefited tremendously from these partnerships. Over the years, the ways in which industrial research is conducted at synchrotron facilities have evolved significantly, and a new paradigm of collaboration between industry and facilities is clearly needed to address this changing situation. In this presentation, the discussion will focus on an enhancement plan recently implemented at the NSLS to address industrial users' concerns and needs. The goal of NSLS Industrial Program Enhancement plan is to encourage greater use of synchrotron tools by industry researchers, improve access to NSLS beamlines by industrial researchers and facilitate research collaborations between industrial researchers and NSLS staff as well as researchers from university and government laboratories. Examples of recent developments in these areas will be presented.

University-Industry Collaboration in IS Research

DEFF Research Database (Denmark)

Schubert, Petra; Bjørn-Andersen, Niels

2012-01-01

of successful modes of collaboration. In this paper, we present the findings of the first qualitative in‐depth phase, in which we inter‐ viewed nine experienced researchers in order to understand the phenomenon of university‐ industry collaboration in the context of different research backgrounds. The findings...... from the preliminary interviews show that researchers have very differing individual preferences regarding the ideal setup of such collaborative research projects. They also show that design research and case study are the most common research methods in such projects. While peer‐ reviewed conference...... papers and journal articles are the most popular forms of academic output, reports and sessions with managers are the prevalent output for industry partners. This work is a precursor to a larger survey, which will allow us to study correlations between characteristics of researcher/project type...

Geological structure of Osaka basin and characteristic distributions of structural damage caused by earthquake; Osaka bonchi kozo to shingai tokusei

Energy Technology Data Exchange (ETDEWEB)

Nakagawa, K; Shiono, K; Inoue, N; Senda, S [Osaka City University, Osaka (JP. Faculty of Science); Ryoki, K [Osaka Polytechnic Collage, Osaka (Japan); Shichi, R [Nagoya University, Nagoya (Japan). Faculty of Science

1996-05-01

The paper investigates relations between the damage caused by the Hyogo-ken Nanbu earthquake and the deep underground structures. A characteristic of the earthquake damage distribution is that the damage concentrated near faults. Most of the damages were seen on the side of faults` relatively falling rather than right above the faults and of their slightly slanting to the seaside. Distribution like this seems to be closely related to underground structures. Therefore, a distribution map of the depth of basement granite in Osaka sedimentary basin was drawn, referring to the data on basement rock depth obtained from the distribution map of gravity anomaly and the result of the survey using the air gun reflection method. Moreover, cubic underground structures were determined by 3-D gravity analysis. The result was concluded as follows: when observing the M7 zone of the low land, in particular, where the damage was great from an aspect of gravity anomaly, the basement rock below the zone declined near the cliff toward the sea, which indicates a great possibility of its being a fault. There is a high possibility that the zone suffered mostly from the damage caused by focusing by refraction and total reflection of seismic wave rays. 3 refs., 8 figs.

Categories And Utilization Of Industrial Research And Development ...

African Journals Online (AJOL)

Research and Development outputs from scientific institutes and utilization of such outputs have been examin-ed. The data and information were drawn from 3 industry-based research Institutes of the Council for Scientific and Industrial Research (CSIR-Ghana), and also from users of the research outputs (such as ...

Research study of conjugate materials; Conjugate material no chosa kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The paper reported an introductory research on possibilities of new glass `conjugate materials.` The report took up the structure and synthetic process of conjugate materials to be researched/developed, classified them according to structural elements on molecular, nanometer and cluster levels, and introduced the structures and functions. Further, as glasses with new functions to be proposed, the paper introduced transparent and high-strength glass used for houses and vehicles, light modulation glass which realizes energy saving and optical data processing, and environmentally functional glass which realizes environmental cleaning or high performance biosensor. An initial survey was also conducted on rights of intellectual property to be taken notice of in Japan and abroad in the present situation. Reports were summed up and introduced of Osaka National Research Institute, Electrotechnical Laboratory, and National Industrial Research Institute of Nagoya which are all carrying out leading studies of conjugate materials. 235 refs., 135 figs., 6 tabs.

Energy efficient industrialized housing research program

Energy Technology Data Exchange (ETDEWEB)

Berg, R.; Brown, G.Z.; Finrow, J.; Kellett, R.; McDonald, M.; McGinn, B.; Ryan, P.; Sekiguchi, Tomoko (Oregon Univ., Eugene, OR (USA). Center for Housing Innovation); Chandra, S.; Elshennawy, A.K.; Fairey, P.; Harrison, J.; Mazwell, L.; Roland, J.; Swart, W. (Florida Solar Energy Center, Cape Canaveral, FL (USA))

1989-12-01

This document describes the research work completed in five areas in fiscal year 1989. (1) The analysis of the US industrialized housing industry includes statistics, definitions, a case study, and a code analysis. (2) The assessment of foreign technology reviews the current status of design, manufacturing, marketing, and installation of industrialized housing primarily in Sweden and Japan. (3) Assessment of industrialization applications reviews housing production by climate zone, has a cost and energy comparison of Swedish and US housing, and discusses future manufacturing processes and emerging components. (4) The state of computer use in the industry is described and a prototype design tool is discussed. (5) Side by side testing of industrialized housing systems is discussed.

An assessment of PKI and networked electronic patient record system: lessons learned from real patient data exchange at the platform of OCHIS (Osaka Community Healthcare Information System).

Science.gov (United States)

Takeda, Hiroshi; Matsumura, Yasushi; Kuwata, Shigeki; Nakano, Hirohiko; Shanmai, Ji; Qiyan, Zhang; Yufen, Chen; Kusuoka, Hideo; Matsuoka, Masaki

2004-03-31

To enhance medical cooperation between the hospitals and clinics around Osaka local area, the healthcare network system, named Osaka Community Healthcare Information System (OCHIS), was established with support of a supplementary budget from the Japanese government in fiscal year 2002. Although the system has been based on healthcare public key infrastructure (PKI), there remain security issues to be solved technically and operationally. An experimental study was conducted to elucidate the central and the local function in terms of a registration authority and a time stamp authority in contract with the Japanese Medical Information Systems Organization (MEDIS) in 2003. This paper describes the experimental design and the results of the study concerning message security.

Superconducting analogue electronics for research and industry

International Nuclear Information System (INIS)

Winkler, D

2003-01-01

This paper gives a brief review of superconducting electronics in research and industry. Examples will show how science benefits from the development and how superconducting devices have found their way into industry and to some commercial products. Impact in terms of enabling new research in other fields (e.g. radio astronomy, medicine), in industry (certification, safety, metrology, etc) and in terms of market will be addressed. From the examples, two fields will be emphasized: superconducting detectors for astronomy and the superconducting quantum interference devices (SQUIDs) employed for different applications

Sea bottom gravity survey of Osaka bay and its study; Osakawan kaitei juryoku chosa to sono kosatsu

Energy Technology Data Exchange (ETDEWEB)

Komazawa, M [Geological Survey of Japan, Tsukuba (Japan); Ota, Y; Shibuya, S; Kumai, M; Murakami, M [Japex Geoscience Institute, Inc., Tokyo (Japan)

1996-05-01

This paper reports a sea bottom gravity survey conducted with an objective to identify deep underground structure in the vicinity of the epicenter of the Hyogoken-Nanbu Earthquake. The surveyed areas are the whole Osaka Bay area north of the north latitude of 34 degrees and 20 minutes, and the eastern part of the Sea of Harima east of the east longitude of 134 degrees and 40 minutes, excluding the areas difficult of performing measurements. A square lattice with sides each about 2 km was arranged with 408 measurement points. The measurement was carried out by using an observation vessel mounted with a sea bottom gravimeter made by LaCoste and Romberg Corporation, which was lowered down to the sea bottom at the measurement points. Errors in positions and water depths at the gravity measuring points were suppressed to less than 0.002 minutes and 0.1 m, respectively. The measurement data were given necessary corrections by using a unified method applicable also to land areas, and a Bouguer anomaly chart was prepared. Based on the chart, this paper summarizes features in the Bouguer anomaly in the surveyed areas (such as the low-gravity anomaly band extending the central part of the Osaka bay from north-east to south-west, and the gradient structure existing on the Awaji island side). 6 refs., 1 fig.

Theoretical-methodical Fundamentals of industrial marketing research

OpenAIRE

Butenko, N.

2009-01-01

The article proves the necessity to research theoretical and methodical fundamentals of industrial marketing and defines main key aspects of relationship management with the customers on industrial market.

Lunar Industry & Research Base Concept

Science.gov (United States)

Lysenko, J.; Kaliapin, M.; Osinovyy, G.

2017-09-01

Currently, all main space industry players, such as Europe, USA, Russia, China, etc., are looking back again at the idea of Moon exploration building there a manned lunar base. Alongside with other world spacefaring nations, Yuzhnoye State Design Office with its long-time development experience, technological and intellectual potential, organized its own conceptual work on development of the Lunar Industry & Research Base. In the frames of conceptual project "Lunar Industrial & Research Base" were formed its appearance, preliminary configuration and infrastructure at different stages of operation, trajectory and flight scheme to the Moon, as well as terms of the project's realization, and main technical characteristics of the systems under development, such as space transportation system for crew and cargo delivery to lunar surface and return to Earth, standardized designs of lunar modules, lunar surface vehicles, etc. The "Lunar Industrial & Research Base" project's preliminary risk assessment has shown a high value of its overall risk due to the lack of reliable information about the Moon, technical risks, long-term development of its elements, very high financial costs and dependence on state support. This points to the fact that it is reasonable to create such a global project in cooperation with other countries. International cooperation will expand the capabilities of any nation, reduce risks and increase the success probability of automated or manned space missions. It is necessary to create and bring into operation practical mechanisms for long-term space exploration on a global scale. One of the ways to do this is to create a multinational agency which would include both state enterprises and private companies.

CREATIV: Research-based innovation for industry energy efficiency

International Nuclear Information System (INIS)

Tangen, Grethe; Hemmingsen, Anne Karin T.; Neksa, Petter

2011-01-01

Improved energy efficiency is imperative to minimise the greenhouse gas emissions and to ensure future energy security. It is also a key to continued profitability in energy consuming industry. The project CREATIV is a research initiative for industry energy efficiency focusing on utilisation of surplus heat and efficient heating and cooling. In CREATIV, international research groups work together with key vendors of energy efficiency equipment and an industry consortium including the areas metallurgy, pulp and paper, food and fishery, and commercial refrigeration supermarkets. The ambition of CREATIV is to bring forward technology and solutions enabling Norway to reduce both energy consumption and greenhouse gas emissions by 25% within 2020. The main research topics are electricity production from low temperature heat sources in supercritical CO 2 cycles, energy efficient end-user technology for heating and cooling based on natural working fluids and system optimisation, and efficient utilisation of low temperature heat by developing new sorption systems and compact compressor-expander units. A defined innovation strategy in the project will ensure exploitation of research results and promote implementation in industry processes. CREATIV will contribute to the recruitment of competent personnel to industry and academia by educating PhD and post doc candidates and several MSc students. The paper presents the CREATIV project, discusses its scientific achievements so far, and outlines how the project results can contribute to reducing industry energy consumption. - Highlights: → New technology for improved energy efficiency relevant across several industries. → Surplus heat exploitation and efficient heating and cooling are important means. → Focus on power production from low temperature heat and heat pumping technologies. → Education and competence building are given priority. → The project consortium includes 20 international industry companies and

Directory of French photovoltaic research and industry 2011

International Nuclear Information System (INIS)

Poubeau, Romain; Simmonet, Raphael; Canals, Jonathan

2011-05-01

After an overview of what is at stake in terms of industrial employment in the photovoltaic sector, a presentation of competitiveness clusters, a description of the value chain (cell manufacturers, arrays manufacturers, power inverter manufacturers, electric equipment manufacturers, structure component manufacturers, fabrication steps, etc.) in the photovoltaic sector, this document proposes a directory (addresses, activity descriptions) of research and industrial actors of the photovoltaic sector in France: research centres, manufacturers, industrial projects

Strategic research field no.4, industrial innovations

International Nuclear Information System (INIS)

Kato, Chisachi

2011-01-01

'Kei'-supercomputer is planned to start its full-scale operation in about one year and a half. With this, High Performance Computing (HPC) is most likely to contribute not only to further progress in basic and applied sciences, but also to bringing about innovations in various fields of industries. It is expected to substantially shorten design time, drastically improve performance and/or liability of various industrial products, and greatly enhance safety of large-scale power plants. In this particle, six research themes, which are currently being prepared in this strategic research field, 'industrial innovations' so as to use 'Kei'-supercomputer as soon as it starts operations, will be briefly described regarding their specific goals and break-through that they are expected to bring about in industries. It is also explained how we have determined these themes. We are also planning several measures in order to promote widespread use of HPC including 'Kei'-supercomputer in industries, which will also be elaborated in this article. (author)

First experiment on liquid hydrogen transportation by ship inside Osaka bay

Science.gov (United States)

Maekawa, K.; Takeda, M.; Hamaura, T.; Suzuki, K.; Miyake, Y.; Matsuno, Y.; Fujikawa, S.; Kumakura, H.

2017-12-01

A project to import a large amount of liquid hydrogen (LH2) from Australia by a cargo carrier, which is equipped with two 1250 m3 tanks, is underway in Japan. It is important to understand sloshing and boil-off characteristics inside the LH2 tank during marine transportation. However, the LH2 sloshing and boil-off characteristics on the sea have not yet been clarified. First experiment on the LH2 transportation of 20 liter with magnesium diboride (MgB2) level sensors by the training ship “Fukae-maru”, which has 50 m long and 449 ton gross weight, was carried out successfully inside Osaka bay on February 2, 2017. In the experiment, synchronous measurements of liquid level, temperature, pressure, ship motions, and accelerations as well as the rapid depressurization test were done. The increase rate of the temperature and the pressure inside the LH2 tank were discussed under the rolling and the pitching conditions.

Measurement of indoor radon Concentrations in Osaka, Nara, Wakayama and Hyogo with passive dosemeters

International Nuclear Information System (INIS)

Mori, Toshiaki; Hori, Yasuharu; Takeda, Atsuhiko; Iwasaki, Tamiko; Uchiyama, Masahumi; Fujimoto, Kenzo; Kankura, Takako; Kobayashi, Sadayosi.

1989-01-01

Indoor radon concentrations of 792 houses in Osaka, Nara, Wakayama and Hyogo were measured by the passive dosemeter which was developed in Karlsruhe Nuclear Research Center in West Germany. Each house was measured at two places for successive two periods of six months to obtain annual average exposure due to radon daughters. The arithmetic mean concentration of all houses was 45.2 Bq/m 3 with a standard deviation of 27.2; the geometric mean, 40.7 Bq/m 3 and the median, 39 Bq/m 3 . The distribution of the radon levels was approximately log-normal with 80% of houses having radon concentrations less than 60 Bq/m 3 . The seasonal variation of the mean radon concentration was evident between the former period including winter value of 45 Bq/m 3 and the latter including summer value of 32 Bq/m 3 . The indoor radon concentrations of wooden houses were found to have the widest distribution with the highest value of 371 Bq/m 3 . The highest value obtained in the ferro-concrete house was 118 Bq/m 3 . Twelve houses having indoor radon concentrations higher than 120 Bq/m 3 were all Japanese traditional wooden houses with walls made of soil. (author)

Government-University-Industry-Research Roundtable

Energy Technology Data Exchange (ETDEWEB)

1995-02-01

Roundtable projects active during 1993 are described in this section. Projects completed in prior years are not included here, but publications resulting from them are included in the list of publications which are attached. Such prior projects include nurturing science and engineering talent, research facility financing, multidisciplinary research and education, university-industry-federal laboratory partnerships, and federal-state cooperation in science and technology.

Scenario research: The food industry in 2010

DEFF Research Database (Denmark)

Stacey, Julia; Sonne, Anne-Mette; Jensen, Birger Boutrup

2001-01-01

What kind of foods will the consumers choose to buy in 2010? Will they be buying organic foods, functional foods or go for the cheapest products? Nobody can predict the future. However, by using scenario techniques qualified indications on future developments can be put together. Researchers...... at MAPP and the Department of Manufacturing Engineering and Management, The Technical University of Denmark have constructed three scenarios about the Danish food industry in 2010. The aim has been to identify the demands the food industry can expect to meet in the future plus which research areas...... the public research should prioritise in order to support the development of competences within the food industry. The scenarios are isolated developments. In practise, the future is likely to be a combination of the different tendencies within the scenarios. The first scenario 'Naturalness' has focus...

Developing and Managing University-Industry Research Collaborations through a Process Methodology/Industrial Sector Approach

Science.gov (United States)

Philbin, Simon P.

2010-01-01

A management framework has been successfully utilized at Imperial College London in the United Kingdom to improve the process for developing and managing university-industry research collaborations. The framework has been part of a systematic approach to increase the level of research contracts from industrial sources, to strengthen the…

Industrial structure at research reactor suppliers

International Nuclear Information System (INIS)

Roegler, H.-J.; Bogusch, E.; Friebe, T.

2001-01-01

Due to the recent joining of the forces of Framatome S. A. from France and the Nuclear Division of Siemens AG Power Generation (KWU) from Germany to a Joint Venture named Framatome Advanced Nuclear Power S.A.S., the issue of the necessary and of the optimal industrial structure for nuclear projects as a research reactor is, was discussed internally often and intensively. That discussion took place also in the other technical fields such as Services for NPPs but also in the field of interest here, i. e. Research Reactors. In summarizing the statements of this presentation one can about state that: Research Reactors are easier to build than NPPs, but not standardised; Research Reactors need a wide spectrum of skills and experiences; to design and build Research Reactors needs an experienced team especially in terms of management and interfaces; Research Reactors need background from built reference plants more than from operating plants; Research Reactors need knowledge of suitable experienced subsuppliers. Two more essential conclusions as industry involved in constructing and upgrading research reactors are: Research Reactors by far are more than a suitable core that generates a high neutron flux; every institution that designs and builds a Research Reactor lacks quality or causes safety problems, damages the reputation of the entire community

Industry sponsorship and research outcome

DEFF Research Database (Denmark)

Lundh, Andreas; Sismondo, Sergio; Lexchin, Joel

2012-01-01

Clinical research affecting how doctors practice medicine is increasingly sponsored by companies that make drugs and medical devices. Previous systematic reviews have found that pharmaceutical industry sponsored studies are more often favorable to the sponsor's product compared with studies...

Research and chemical industry in 90's

International Nuclear Information System (INIS)

Trapasso, I.

1992-01-01

This paper examines the importance of research with respect to changes taking place within the chemical industry. Specific areas having a significant impact on the future evolution of the industry are identified. The chemical industry is highly R ampersand D intensive with respect to its overall sales volume, as well as, to R ampersand D levels in other industries; and R ampersand D has been a dominant factor influencing the restructuring, on a global scale, of this industry. In the 90's, the industry is expected to have a supply model which is based on the production of marketable high-technology products and integrated systems, developed through coordinated research in multi-disciplinary scientific fields. The optimum strategic and organizational strategies which are to be adopted by the industry during this decade are discussed with reference to the directions being taken by a large multi-national firm in developing strategies in various areas, e.g., new prime materials, environmental protection, pharmacology, and biotechnology. A look is given at recent developments in the sector of advanced polymers, with attention given to processes involving polymer genetics, new products with a wide range of applications and those offering a high level of environmental compatibility. A review of new materials development includes an assessment of prospects for biodegradable plastics based on natural carbohydrates

Quantitative phase analysis in industrial research

International Nuclear Information System (INIS)

Ahmad Monshi

1996-01-01

X-Ray Diffraction (XRD) is the only technique able to identify phase and all the other analytical techniques give information about the elements. Quantitative phase analysis of minerals and industrial products is logically the next step after a qualitative examination and is of great importance in industrial research. Since the application of XRD in industry, early in this century, workers were trying to develop quantitative XRD methods. In this paper some of the important methods are briefly discussed and partly compared. These methods are Internal Standard, Known Additions, Double Dilution, External Standard, Direct Comparison, Diffraction Absorption and Ratio of Slopes

Emerging trends in contract research industry in India.

Science.gov (United States)

Drabu, Sushma; Gupta, Alka; Bhadauria, Anupama

2010-09-01

A Contract Research Organization (CRO) is a service organization that provides support to the pharmaceutical industry and offers a wide range of "outsourced" pharmaceutical research services to aid in R&D process and is thus an essential tool for undertaking clinical trials in the present scenario when high stakes are involved in the drug discovery process. This industry also offers a safe option of investment as the industry is largely recession-proof, with a significant upscale growth. Presently India occupies a very small pie of the global market share in the Clinical Trials Industry but it is estimated to conduct nearly 5% of global clinical trials by 2012. The global CRO industry valued $18 bn in 2008 and the market is expected to grow at an annual rate of 14% between 2009 and 13. Top multinational pharmaceuticals companies are venturing into the Indian business, in collaboration with the Indian Drug Companies. According to a recent study by Mckinsey & Company, the Indian Clinical Research Industry can attract $1.5 bn of revenue from US and EU by 2010. Such an increase in outsourcing from the western countries has led the global pharma companies and Indian entrepreneurs to set up Contract Research Organizations (CROs) in India. To bring this into realization and fulfil the market demand, while simultaneously aiding in improving the country's economical standards and market position, joint and well-coordinated efforts on part of the government, industry, and working professionals are needed in terms of regulatory affairs, audits, transparency in work affairs, garnering patient confidence, and pharmacovigilance. Copyright 2010 Elsevier Inc. All rights reserved.

Knowledge sharing in industrial research

NARCIS (Netherlands)

Berends, J.J.

2003-01-01

Over the past decade, the field of organization studies has increasingly focused on knowledge and knowledge processes in organizations. This thesis describes a study of one of those processes, knowledge sharing, in the context of industrial research. Though the attention for knowledge in

[Food industry funding and epidemiologic research in public health nutrition].

Science.gov (United States)

Navarrete-Muñoz, Eva María; Tardón, Adonina; Romaguera, Dora; Martínez-González, Miguel Ángel; Vioque, Jesús

The interests of the food industry to fund nutrition and health research are not limited to promoting scientific advances. Recently, several systematic reviews conducted about the effect of sugar-sweetened beverages and health outcomes have shown some biased conclusions in studies that acknowledge industry sponsorship. In this context, the Nutrition Working Group of the Spanish Epidemiology Society presented a scientific session entitled Food industry and epidemiologic research at its annual meeting. In a round table, four experts in nutrition research presented their points of view about whether the food industry should fund nutrition-related research and the related potential conflicts of interest of the food industry. All the experts agreed not only on defending independence in nutritional epidemiology regarding the design, interpretation and conclusion of their studies but also on the crucial need for guaranteed scientific rigor, scientific quality of the results and measures to protect studies against potential biases related to the conflicts of interest of funding by the food industry. Drs Pérez-Farinós and Romaguera believe that the most effective way to prevent conflicts of interest would be not to allow the food industry to fund nutrition research; Drs Marcos and Martínez-González suggested the need to establish mechanisms and strategies to prevent the potential influences of the food industry in selecting researchers or institutional sponsorship and in the analysis and results of the studies, to ensure maximum independence for researchers, as well as their professional ethics. Copyright © 2017 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

Overview of Gas Research Institute's industrial utilization research and development program

Energy Technology Data Exchange (ETDEWEB)

Tabb, E S

1982-05-01

A combination of technical, economic, political, and environmental constraints hamper industry's ability to use natural gas efficiently. Although the industrial sector has the best potential to absorb the current surplus of natural gas, many industrial users are disenchanged with the high cost, low efficiency, and environmental problems associated with the existing inventory of gas-fired process systems. Consequently, it is essential for an organization like Gas Research Institute (GRI), which has a national scope and a mandate to generate energy end-use benefits for the industrial gas consumer, to assume a leadership role in the development program aimed, not only at upgrading the energy efficiency of industrial process equipment, but at increasing its production capability while meeting environmental standards.

Industry's demand for the BESSY synchrotron radiation (SR): approaches towards interlinking basic scientific research activities and industry

International Nuclear Information System (INIS)

Bierhals, R.; Schmoch, U.; Nick, D.; Pilorget, L.; Ritschel, C.; Walter, G.H.

1994-08-01

In Germany, industry's demand for synchrotron radiation (SR) is very limited, due to the current macroeconomic situation and the corporate strategy of potential SR users in industry. This is in contrast to the conditions in the USA (and Japan), where industrial enterprises more readily invest in and run their own long-term basic research projects for exploration of potential commercial applications according to their demands, with research goals pursued there and in Germany overlapping to a large extent. It cannot be expected that demand for SR from industry in Germany will ever come up to the level seen in the USA. In Germany, non-university research institutes are most likely to become an important group of potential users of SR. Substantially boosting the demand for SR from industry will need a change of macroeconomic framework conditions affecting the corporate strategy to the effect that industry will more strongly commit itself to and take up responsibility for application-oriented fundamental research and the corresponding technology transfer. This can be achieved by a policy providing both for institutional means and financial incentives. As to near-market, strategic technological developments, establishment of structures allowing direct cooperation of science and technology, for instance in the form of joint ventures, or underwriting agreements and corresponding supervisory boards, seem to be promising. As to basic-research-oriented promotion of research, a technology screening might lead to the selection of technology-relevant research goals, and corresponding financial support from a special fund. Such incentives for cooperative action by technology, science and the government will create novel types of research-industry interfaces in Germany between ''historical'' spheres of autonomy of research of industry and the scientific community. (orig.) [de

Improving industrial designers work process by involving user research

DEFF Research Database (Denmark)

Dai, Zheng; Ómarsson, Ólafur

2011-01-01

With changing times, new technologies and more opinionated consumers, the modern industrial designer has found himself in need of fresher and more up to date approaches in his daily work. In a fast moving industry, the designer needs to keep a thinking process of dynamic and subjective attitude...... will give the grounding for believing that the industrial designer needs to adopt user research methods to a level where he can still continue to work under the very nature of industrial design that has made it a successful practice for the last century. The combing of the approaches and attitude will help....... User research is part of user centered design (UCD). UCD has a reputation for subjective and reflective practice. In this paper there are two example cases. One is conducted by a classical industrial design process, and another is costing half of energy and time in user research. These examples...

Industrial workshop on LASL semiconductor radiation-detector research and development

International Nuclear Information System (INIS)

Endebrock, M.

1978-11-01

An Industrial Workshop on LASL Semiconductor Radiation Detector Research and Development was held at the Los Alamos Scientific Laboratory (LASL) in the spring of 1977. The purpose was to initiate communication between our detector research and development program and industry. LASL research programs were discussed with special emphasis on detector problems. Industrial needs and capabilities in detector research and development were also presented. Questions of technology transfer were addressed. The notes presented here are meant to be informal, as were the presentations

Technology Roadmap Research Program for the Steel Industry

Energy Technology Data Exchange (ETDEWEB)

Joseph R. Vehec

2010-12-30

The steel industry's Technology Roadmap Program (TRP) is a collaborative R&D effort jointly sponsored by the steel industry and the United States Department of Energy. The TRP program was designed to develop new technologies to save energy , increase competitiveness, and improve the environment. TRP ran from July, 1997 to December, 2008, with a total program budget of $38 million dollars. During that period 47 R&D projects were performed by 28 unique research organizations; co-funding was provided by DOE and 60 industry partners. The projects benefited all areas of steelmaking and much know-how was developed and transferred to industry. The American Iron and Steel Institute is the owner of all intellectual property developed under TRP and licenses it at commercial rates to all steelmakers. TRP technologies are in widespread use in the steel industry as participants received royalty-free use of intellectual property in return for taking the risk of funding this research.

The fifteenth period report on the cooperative utilization of the AVF cyclotron at Osaka University RCNP (Dec 1982 - Apr 1983)

International Nuclear Information System (INIS)

1984-01-01

The AVF cyclotron at the RCNP (Research Center for Nuclear Physics) of Osaka University has been cooperatively used by various researchers of Japanese universities or colleges. This collective report covers papers concerning various studies performed at the AVF during Dec 1982 to Apr 1983. Some of the titles of these papers are as follows : Elastic scattering of 56 MeV polarized deuterons from 12 C and 40 Ca ; Pionic three-nucleon capture reactions ; Measurement on branching ratios of short-lived beta emitter 23 Mg and its hyperfine interactions ; Half-life and branching ratios of short-lived beta emitter 13 O ; 7 Li excitation of the giant resonances in 208 Pb ; Measurements of spin polarization of residual nuclei after light particle emission in heavy ion reactions ; Target dependence of the sequential alpha decay through the narrow resonances of 20 Ne ; Analyzing power of neutron continuum spectra for the 93 Nb (p,nx) reaction and a simple one step OWBA analysis ; Energy dependence of the reaction mechanism for the 3 He and alpha induced reactions ; Medium energy gamma rays following radiative capture of polarized protons on light nuclei. (Aoki, K.)

Research on Risks and Forecasting Countermeasures of Hainan Banana Industry

OpenAIRE

Liu, Yan-qun; Zeng, Xiao-hong; Fang, Jia

2011-01-01

Based on the overviews of the current conditions of Hainan banana industry, the research makes an analysis of the risks faced by Hainan banana industry. They are respectively marketing risks, natural risks, information risks and production risks. In order to promote a sustainable and rapid development of Hainan banana industry, Countermeasures are proposed in the research. The first is to strengthen the leading organization of forecasting mechanisms on banana industry. The second is to establ...

Industrie 4.0 - from the perspective of applied research

OpenAIRE

Neugebauer, R.; Hippmann, S.; Leis, M.; Landherr, M.

2016-01-01

Industrie 4.0 is the German description for the 4th industrial revolution. While in Germany "Industrie 4.0" aims at putting the strong German manufacturing industry in a position of future readiness through integrated digitization, for the ICT-dominant USA, "Smart Manufacturing" is ought to revive the country's re-industrialization. Fraunhofer, a major European Research and Technology Organization (RTO), has a strong focus on Industrie 4.0 technologies throughout the whole production value ch...

Estimated dietary intake of radionuclides and health risks for the citizens of Fukushima City, Tokyo, and Osaka after the 2011 nuclear accident.

Directory of Open Access Journals (Sweden)

Michio Murakami

Full Text Available The radionuclides released from the Fukushima Daiichi nuclear power plant in 2011 pose a health risk. In this study, we estimated the 1st-year average doses resulting from the intake of iodine 131 (131I and cesium 134 and 137 (134Cs and 137Cs in drinking water and food ingested by citizens of Fukushima City (∼50 km from the nuclear power plant; outside the evacuation zone, Tokyo (∼230 km, and Osaka (∼580 km after the accident. For citizens in Fukushima City, we considered two scenarios: Case 1, citizens consumed vegetables bought from markets; Case 2, citizens consumed vegetables grown locally (conservative scenario. The estimated effective doses of 134Cs and 137Cs agreed well with those estimated through market basket and food-duplicate surveys. The average thyroid equivalent doses due to ingestion of 131I for adults were 840 µSv (Case 1 and 2700 µSv (Case 2 in Fukushima City, 370 µSv in Tokyo, and 16 µSv in Osaka. The average effective doses due to 134Cs and 137Cs were 19, 120, 6.1, and 1.9 µSv, respectively. The doses estimated in this study were much lower than values reported by the World Health Organization and the United Nations Scientific Committee on the Effects of Atomic Radiation, whose assessments lacked validation and full consideration of regional trade in foods, highlighting the importance of including regional trade. The 95th percentile effective doses were 2-3 times the average values. Lifetime attributable risks (LARs of thyroid cancers due to ingestion were 1.7-37×10-6 (Case 1 and5.6-79×10-6 (Case 2 in Fukushima City, 0.73-13×10-6 in Tokyo, and 0.04-0.49×10- 6 in Osaka. The contributions of LARs of thyroid cancers due to ingestion were 5.4%-11% of all exposure (Case 1 and 11%-25% (Case 2 in Fukushima City [corrected].

Heavy Metal Contamination in Urban Soils II Comparison of Urban Park Soils Between Two Cities with Different City and Industrial Activities

OpenAIRE

KOMAI, Yutaka

1981-01-01

A comparative investigation on the state of heavy metal contamination in park soils of two cities with different city and industrial activities was carried out. Sakai and Kishiwada, both situated in southern Osaka Prefecture, were chosen as the investigated cities which had similar natural conditions but different human activities. Park soils were regarded as suitable sites for the investigation of heavy metal problem in urban environments. Samples were taken at 34 parks distributed widely in...

Jobs and Skills in Industry 4.0: An Exploratory Research

OpenAIRE

Pinzone , Marta; Fantini , Paola; Perini , Stefano; Garavaglia , Stefano; Taisch , Marco; Miragliotta , Giovanni

2017-01-01

Part 5: Sustainable Human Integration in Cyber-Physical Systems: The Operator 4.0; International audience; Industry 4.0 is at the center of the current debate among manufacturing leaders, industrial practitioners, policy makers and researchers. Despite the increasing attention paid to changes in jobs and skills generated by Industry 4.0, research in this domain is still scarce. Our study focuses on the evolution of technical skills in the context of Industry 4.0 and it provides qualitative in...

Research of Talent Development Policy of Online Game Industry

Directory of Open Access Journals (Sweden)

Yun-Che Yang

2003-12-01

Full Text Available Due to the progress of information technology and the development of Internet, the digital content industry has become one of the most promising industries in the 21st century. The rapid growth of the online gaming industry at the turn of the century does not only catch the eyes of the whole world, but also reshape the entire information-related industry. The purpose of this study is to explore issue of the talent development policy of the domestic online game industry. The method of in-depth interview is used in this study, and the research target is chosen to be qualified of speaking for the government, the education institutes, and the private sectors in the industry. The findings of this research suggest that Taiwan's government should take up a more vigorous responsibility. Following the government's leadership, both education institutes and industry private sectors must actively participate in the collaboration and feed back the up-dated information, such as the market trend and most wanted human resources, to the policy makers.[Article content in Chinese

Differing Perceptions Concerning Research Integrity Between Universities and Industry: A Qualitative Study.

Science.gov (United States)

Godecharle, Simon; Nemery, Benoit; Dierickx, Kris

2017-09-14

Despite the ever increasing collaboration between industry and universities, the previous empirical studies on research integrity and misconduct excluded participants of biomedical industry. Hence, there is a lack of empirical data on how research managers and biomedical researchers active in industry perceive the issues of research integrity and misconduct, and whether or not their perspectives differ from those of researchers and research managers active in universities. If various standards concerning research integrity and misconduct are upheld between industry and universities, this might undermine research collaborations. Therefore we performed a qualitative study by conducting 22 semi-structured interviews in order to investigate and compare the perspectives and attitudes concerning the issues of research integrity and misconduct of research managers and biomedical researchers active in industry and universities. Our study showed clear discrepancies between both groups. Diverse strategies in order to manage research misconduct and to stimulate research integrity were observed. Different definitions of research misconduct were given, indicating that similar actions are judged heterogeneously. There were also differences at an individual level, whether the interviewees were active in industry or universities. Overall, the management of research integrity proves to be a difficult exercise, due to many diverse perspectives on several essential elements connected to research integrity and misconduct. A management policy that is not in line with the vision of the biomedical researchers and research managers is at risk of being inefficient.

Comparison of survival of adolescents and young adults with hematologic malignancies in Osaka, Japan.

Science.gov (United States)

Nakata-Yamada, Kayo; Inoue, Masami; Ioka, Akiko; Ito, Yuri; Tabuchi, Takahiro; Miyashiro, Isao; Masaie, Hiroaki; Ishikawa, Jun; Hino, Masayuki; Tsukuma, Hideaki

2016-01-01

The survival gap between adolescents and young adults (AYAs) with hematological malignancies persists in many countries. To determine to what extent it does in Japan, we investigated survival and treatment regimens in 211 Japanese AYAs (15-29 years) in the Osaka Cancer Registry diagnosed during 2001-2005 with hematological malignancies, and compared adolescents (15-19 years) with young adults (20-29 years). AYAs with acute lymphoblastic leukemia (ALL) had a poor 5-year survival (44%), particularly young adults (29% vs. 64% in adolescents, p = 0.01). Additional investigation for patients with ALL revealed that only 19% of young adults were treated with pediatric treatment regimens compared with 45% of adolescents (p = 0.05). Our data indicate that we need to focus on young adults with ALL and to consider establishing appropriate cancer care system and guidelines for them in Japan.

Industry Participation in Defence Research and Development,

Science.gov (United States)

1983-12-01

Research and Development: Proposals for Additional Incentives. ASTEC , 1990. K . Interaction between Industry, Higher Education and Government Laboratories...Incentives for Innovation in Australian Industry. ASTEC , 1983. P. Bibliography. Distribution Document Control Data Sheet AWA I A& I 14l2 p/O)OIP (02... ASTEC and the Senate Committee on Science and the Environment. My Department is already preparing advice for me in this regard and I shall ask them to

How Researchers Use Social Media to Promote their Research and Network with Industry

Directory of Open Access Journals (Sweden)

Päivi Jaring

2017-08-01

Full Text Available Social media is now an essential information and interaction channel. Companies advertise and sell their products and services through social media, but this channel has not been so commonly applied to the task of selling knowledge and research work. This article studies the use of social media by researchers to promote their research and network with product developers in industry, and it presents a model of the use of social media by researchers. The data for this research was obtained by interviewing individual researchers of a research organization and surveying product developers from industry. The findings show that social media is seen as a good source of new information and contacts, and it is suitable for promoting awareness of research services and results. The results show that the speed and intensity of social media present challenges for researchers, but by being active in posting content and participating in discussions, researchers can derive benefits and enhance their personal reputations.

Joint research achievement report on field test project for photovoltaic power generation of industrial use in fiscal 2000 (5/5); 2000 nendo sangyo tou you taiyokohatsuden field test jigyo kyodo kenkyu seika hokokusho 5/5

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-05-01

This paper summarizes the achievements in fiscal 2000 on the field tests for photovoltaic power generation of industrial use. This report describes the details of the achievements on the following organizations: the Hiroshima Riverside Hotel; the Saraya Corporation; the Nanshin Subaru Corporation; the Ricoh Uni-techno Corporation; Toyota Motors Kyushu Corporation (Eco-center); Hitachi Electric Wires; Yuasa Corporation, Furukawa City in Ibaraki Prefecture; the Takasaki Branch Office of East Japan Passenger Railways; the World Trade Center Building, the Minami Trading Company, Onga Township in Fukuoka Prefecture; the Keio Electric Railways (Wakabadai Station); the Business Enterprise Bureau of Kyoto Prefectural Government; Okinawa Electric Power (Kita-Daito Island), Kawagoe Township in Mie Prefecture, the Keio Electric Railways (Meidai-mae Station); Kitakata Township in Gifu Prefecture; the Yamaguchi Prefectural Government; the MSK Corporation; the Fuji Pream Corporation; Kumano Township in Hiroshima Prefecture; Fukuroi City in Shizuoka Prefecture; the Water Supply Bureau of Yokohama Municipality in Kanagawa Prefecture; Ashiya City in Hyogo Prefecture; Shinoyama City in Hyogo Prefecture; the Gantan Beauty Industry; the Toyokuni Industry; and Minoo City in Osaka Prefecture. (NEDO)

Impact of design research on industrial practice tools, technology, and training

CERN Document Server

Lindemann, Udo

2016-01-01

Showcasing exemplars of how various aspects of design research were successfully transitioned into and influenced, design practice, this book features chapters written by eminent international researchers and practitioners from industry on the Impact of Design Research on Industrial Practice. Chapters written by internationally acclaimed researchers of design analyse the findings (guidelines, methods and tools), technologies/products and educational approaches that have been transferred as tools, technologies and people to transform industrial practice of engineering design, whilst the chapters that are written by industrial practitioners describe their experience of how various tools, technologies and training impacted design practice. The main benefit of this book, for educators, researchers and practitioners in (engineering) design, will be access to a comprehensive coverage of case studies of successful transfer of outcomes of design research into practice; as well as guidelines and platforms for successf...

Federal agencies active in chemical industry-related research and development

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-09-29

The Energy Policy Act of 1992 calls for a program to further the commercialization of renewable energy and energy efficient technologies for the industrial sector.. The primary objective of the Office of Industrial Technologies Chemical Industry Team is to work in partnership with the US chemical industry to maximize economic, energy, and environmental benefits through research and development of innovative technologies. This document was developed to inventory organizations within the federal government on current chemical industry-related research and development. While an amount of funding or number of projects specifically relating to chemical industry research and development was not defined in all organizations, identified were about 60 distinct organizations representing 7 cabinet-level departments and 4 independent agencies, with research efforts exceeding $3.5 billion in fiscal year 1995. Effort were found to range from less than $500 thousand per year at the Departments of Agriculture and the Interior to over $100 million per year at the Departments of Commerce, Defense, Energy, and Health and Human Services and the National Aeronautics and Space Administration. The total number of projects in these programs exceeded 10,000. This document is complete to the extent that agencies volunteered information. Additions, corrections, and changes are encouraged and will be incorporated in future revisions.

Postnatal growth of children in relation to noise from Osaka International Airport

Science.gov (United States)

Schell, L. M.; Ando, Y.

1991-12-01

This paper examines the effects of different levels of exposure to airport noise on the physical growth of children. Heights and weights of 6686 three-year-old boys and girls were measured between April 1972 and March 1974. These children are grouped into one of five exposure levels according to their exposure to noise from nearby Osaka International Airport in Japan. The frequency of growth inhibition is examined in each noise group and compared across groups. The frequency of very short boys and girls (less than 87 cm) increases significantly ( p short stature (10th percentile of local standards), the presence of moderate growth inhibition also is related to the level of airport noise, more so in males than females. With a third and less restrictive definition (less than 91 cm), the association is still present. Parallel analyses with weight did not find significant effects of noise exposure. We conclude that airport noise exposure may be related to a greater frequency of children of very small stature. We interpret this as evidence for a long-term physical effect of airport noise on children.

75 FR 45130 - Guidance for Industry and Researchers on the Radioactive Drug Research Committee: Human Research...

Science.gov (United States)

2010-08-02

... and Research, Food and Drug Administration, 10903 New Hampshire Ave., Bldg. 51, rm. 2201, Silver... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2009-D-0125] Guidance for Industry and Researchers on the Radioactive Drug Research Committee: Human Research Without an...

Research proposal: Industry convergence - Driving forces, factors and consequences

OpenAIRE

Weaver, Benjamin

2007-01-01

Industry convergence – the merger of hitherto separate industries – is a phenomenon that has had a profound effect on several industries and received considerable interest among practitioners and business press over the past decades. Despite this, industry con- vergence has only received limited attention from the academic management field, al- though an emergent discussion on convergence can be identified. Prior research is limited by a lack of coherent theoretical definitions of convergence...

Three-dimensional Subsurface Geological Modeling of the Western Osaka Plane based on Borehole Data

Science.gov (United States)

Nonogaki, S.; Masumoto, S.; Nemoto, T.

2012-12-01

Three-dimensional (3D) geological model of subsurface structure plays an important role in developing infrastructures. In particular, the 3D geological model in urban area is quite helpful to solve social problems such as underground utilization, environmental preservation, and disaster assessment. Over the past few years, many studies have been made on algorithms for 3D geological modeling. However, most of them have given little attention to objectivity of the model and traceability of modeling procedures. The purpose of this study is to develop an algorithm for constructing a 3D geological model objectively and for maintaining high-traceability of modeling procedures. For the purpose of our work, we proposed a new algorithm for 3D geological modeling using gridded geological boundary surfaces and the "logical model of geologic structure". The geological boundary surface is given by a form of Digital Elevation Model (DEM). The DEM is generated based on geological information such as elevation, strike and dip by using a unique spline-fitting method. The logical model of geological structure is a mathematical model that defines a positional relation between geological boundary surfaces and geological units. The model is objectively given by recurrence formula derived from a sequence of geological events arranged in chronological order. We applied the proposed algorithm into constructing a 3D subsurface geological model of the western Osaka Plane, southwest Japan. The data used for 3D geological modeling is a set of borehole data provided by Osaka City and Kansai Geoinformatics Agency. As a result, we constructed a 3D model consistent with the subjective model reported in other studies. In addition, all information necessary for modeling, such as the used geological information, the parameters of surface fitting, and the logical model, was stored in text files. In conclusion, we can not only construct 3D geological model objectively but also maintain high

The Japanese mind in disaster 3.11. Web survey in Tohoku, Tokyo, Osaka, and Kyushu (1)

International Nuclear Information System (INIS)

Tsuchida, Shoji; Tsujikawa, Norifumi; Shiotani, Takamasa; Nakagawa, Yuri

2011-01-01

The Tohoku Disaster 3.11 with earthquake M9.0, tsunami, and the Fukushima accident brought the inhabitants horrible damages. Tohoku area people [N=1,000], Tokyo people [N=500], Osaka people [N=500], and Kyushu people [N=500] (Total N=2,500) were targeted at Online survey which was designed to figure out the people's responses to the disaster and their psychological factors. The results showed that the Tohoku area people were in relatively solid local communities and bonded intimately each other. They thought it proper to cope with the disaster through community. They had more negative attitudes to Nuclear Power, and their trust toward the TEPCO and the government was more negative in dealing with the Fukushima accident. (author)

University-Industry Research Collaboration: A Model to Assess University Capability

Science.gov (United States)

Abramo, Giovanni; D'Angelo, Ciriaco Andrea; Di Costa, Flavia

2011-01-01

Scholars and policy makers recognize that collaboration between industry and the public research institutions is a necessity for innovation and national economic development. This work presents an econometric model which expresses the university capability for collaboration with industry as a function of size, location and research quality. The…

Industry-funded dermatologic research within academia in the United States: fiscal and ethical considerations.

Science.gov (United States)

Blank, I H

1992-03-01

Private-sector funding of biomedical research within academia may come from industry, foundations, the dermatologists themselves, and the public at large. Industry-funding is of benefit to both academia and industry. Industry may fund clinical and basic research and product testing. Industry is more willing to fund product testing and clinical research than basic research. Funds for dermatologic research may be obtained from manufacturers of drugs, medical devices, cosmetics, soaps, and detergents. Questions of academic freedom arise when research is funded by industry. The results of academic research are in the public domain; the results of intramural industry research are often proprietary, i.e., "trade secrets." When there is industry funding within academia, any restraints on publication should be held to a minimum and be temporary. Publication should occur in a timely fashion, although recognizing the need for delayed publication if the results concern patentable material. When there is a consultantship, pre-arranged terms of agreement may restrict communication. Patents usually are held by the investigator's institution. The funding company may be granted world-wide, royalty-bearing licenses. Conflicts of interest may arise during any research endeavor; this warrants close attention when the research is industry funded. Stock ownership, speaker fees, blind contracts, etc., should be avoided. In any communication, funding agreements should be stated. Indirect costs are a "necessary evil." There are non-research expenditures associated with all research projects for which the institution is justified in requesting compensation. Indirect costs must have definite connections to a project. As industrial funding of research within academia increases, various facets of the academia-industry relationship are receiving increasing attention. Several aspects of conflicts of interest and indirect costs must yet be resolved. When faced openly and directly, all of these

Creative Research: The Theory and Practice of Research for the Creative Industries

NARCIS (Netherlands)

Kathryn Best

2011-01-01

When conducting research in and for the creative industries, there are a wealth of different possible research approaches that can be taken - reflecting the diverse nature of the disciplines (design, arts and crafts, advertising, architecture, fashion, film, music, TV, radio performing arts,

From research to industry - the establishment of a radiation processing industry in South Africa

International Nuclear Information System (INIS)

Du Plessis, T.A.; Stevens, R.C.B.

1983-01-01

In the late sixties the South African Atomic Energy Board in pursuing its objectives to promote the peaceful application of nuclear energy in general, established a research group with the specific purpose of investigating and developing radiation processing as a new technique. During the early years it was realised that the economic and technological facets of establishing a new industry were equally important and, in addition to fundamental research, strong emphasis was placed on the necessity of marketing this new technology. Although the initial emphasis was put on gamma sterilization, and today still forms the backbone of the radiation processing industry, the promising fields of polymer modification and food irradiation hold a lot of promise in the radiation processing industry. Following ten years of successfully introducing and providing a radiation service, the South African Atomic Energy Board in 1980 decided to transfer its service to the private sector. These developments in South Africa are a good sample of how a small country, through initial government involvement, can acquire a sophisticated new private industry. (author)

Research and photovoltaic industry at the United States

International Nuclear Information System (INIS)

Lerouge, Ch.; Herino, R.; Delville, R.; Allegre, R.

2006-06-01

For a big country as the United States, the solar energy can be a solution for the air quality improvement, the greenhouse gases fight and the reduction of the dependence to the imported petroleum and also for the economic growth by the increase of the employment in the solar industry sector. This document takes stock on the photovoltaic in the United States in the industrial and research domains. The american photovoltaic industry is the third behind the Japan and the Germany. (A.L.B.)

Research and Development Financing in the Renewable Energy Industry in Brazil

Directory of Open Access Journals (Sweden)

Muriel de Oliveira Gavira

2014-09-01

Full Text Available In the last decades, the Brazilian government has put many public policies in place in order to create a favourable environment to promote energy efficiency and clean energy. In this paper we discuss the use of research and development financing support by the clean energy industry in Brazil. To do so, we carried out an empirical research analysing secondary data from legislation, literature case studies, and public and industry reports in order to determine if the companies of the clean energy industry have public financial support to research and development. Our ongoing research shows that, despite incentives to stimulate the dissemination of clean energy, the participation of some of the clean energy is very small (especially solar. We believe that the contributions of this study will assist policy makers, and the whole industry, to improve clean energy research and development investments in Brazil.

Progress of laser fusion research

International Nuclear Information System (INIS)

Yamanaka, Chiyoe

1988-01-01

The history of the research on nuclear fusion utilizing laser is described. It started in USSR in 1968, but the full scale start of laser implosion nuclear fusion was in 1972. In Osaka University, nuclear fusion neutrons were detected with a solid deuterium target and the phenomenon of parametric abnormal absorption in laser plasma was found in 1971. The new type target for implosion nuclear fusion ''Canon ball'' was devised in 1975. The phenomenon of the abnormal transmission of laser beam through a thin metal film in a multiple film target was found in 1976, and named ''Osaka effect''. Also the development of lasers has been advanced, and in 1983, a largest glass laser in the world, Gekko 12, with 12 beams, 30 kJ output, 55 TW, was completed. The new target LHART was devised, which enabled the generation of 10 trillion D-T reaction neutrons. Due to the development of high power laser technology, the realization of the new design of fuel pellets, the evaluation of the data by computer simulation, and the realization of new plasma diagnostic method, the research on laser nuclear fusion has developed rapidly, and the attainment of break-even is expected in 1990s. The features of inertial nuclear fusion are enumerated. (Kako, I.)

PREFACE: International Conference on Advanced Structural and Functional Materials Design 2008

Science.gov (United States)

Kakeshita, Tomoyuki

2009-07-01

The Ministry of Education, Culture, Sports, Science and Technology of Japan started the Priority Assistance for the Formation of Worldwide Renowned Centers of Research - Global COE Program. This program is based on the competitive principle where a third party evaluation decides which program to support and to give priority support to the formation of world-class centers of research. Our program Center of Excellence for Advanced Structural and Functional Materials Design was selected as one of 13 programs in the field of Chemistry and Materials Science. This center is composed of two materials-related Departments in the Graduate School of Engineering: Materials and Manufacturing Science and Adaptive Machine Systems, and 4 Research Institutes: Center for Atomic and Molecular Technologies, Welding and Joining Research Institute, Institute of Scientific and Industrial Research and Research Center for Ultra-High Voltage Electron Microscopy. Recently, materials research, particularly that of metallic materials, has specialized only in individual elemental characteristics and narrow specialty fields, and there is a feeling that the original role of materials research has been forgotten. The 6 educational and research organizations which make up the COE program cooperatively try to develop new advanced structural and functional materials and achieve technological breakthrough for their fabrication processes from electronic, atomic, microstructural and morphological standpoints, focusing on their design and application: development of high performance structural materials such as space plane and turbine blades operating under a severe environment, new fabrication and assembling methods for electronic devices, development of evaluation technique for materials reliability, and development of new biomaterials for regeneration of biological hard tissues. The aim of this international conference was to report the scientific progress in our Global COE program and also to discuss

CONFERENCE CHEVREUL Nutrition research: the industrial approach

Directory of Open Access Journals (Sweden)

Korver Onno

2000-01-01

Full Text Available The goal of nutrition research in an industrial setting is the marketing of products. Since consumers cannot see from the product whether it is healthy, communication to the consumer about the nutritional and health values of the products is essential. Industrial nutrition research therefore has to provide the scientific dossier to underpin the claims and other communication on and around the product as well as the scientific basis for the communication. These two lines are illustrated in figure 1. For scientific audiences the steps to collect the scientific evidence are obvious: first screening for new ideas on the basis of scientific developments and business options, then identifying ingredients that can deliver the health benefit, followed by mechanistic and bioavailability studies and finally human intervention trials. The communication line is less obvious for most scientifically oriented audiences. Experience has shown that an information cascade has to be followed: during the execution of the research work close contact with academic experts (a true dialogue is essential, when the research data are available information of a wide selection of health professionals (e.g. physicians, dieticians, science journalists is taking place and only after this step communication to the consumer starts. The communication with the scientific experts (the first step of the cascade obviously has to be in the hands of the nutrition research group of the industry involved. In Unilever this is the Unilever Nutrition Centre based in Vlaardingen in the Netherlands. Their role in the scientific dialogue is outlined in figure 2. The fact that the “Medaille Chevreul” has been awarded twice to members of the Unilever Nutrition Centre in the last two decades, illustrates that the UNC is considered to be a group with a truly scientific tradition.

Japanese fusion research

International Nuclear Information System (INIS)

Uchida, T.

1987-01-01

The Japan experience during thirty years in nuclear fusion research is reported, after attending the 1st Geneva Conference in 1955, Osaka University, immedeately began linear pinch study using capacitor bank discharge. Subsequently to his trial several groups were organized to ward fusion R and D at universities in Tokyo, Nagoya, Kyoto, Sendai and son on. Based upon the recommendation of Japan Science Council, Institut of Plasma Physics (IPP) was established at Nagoya University in 1961 When the 1st International Conference on Plasma Physics and Controlled Nuclear Fusion Research was held in Saltzburg. The gloomy Bohm barrier had stood in front of many of experiments at that time. (author) [pt

Sugar Industry and Coronary Heart Disease Research: A Historical Analysis of Internal Industry Documents.

Science.gov (United States)

Kearns, Cristin E; Schmidt, Laura A; Glantz, Stanton A

2016-11-01

Early warning signals of the coronary heart disease (CHD) risk of sugar (sucrose) emerged in the 1950s. We examined Sugar Research Foundation (SRF) internal documents, historical reports, and statements relevant to early debates about the dietary causes of CHD and assembled findings chronologically into a narrative case study. The SRF sponsored its first CHD research project in 1965, a literature review published in the New England Journal of Medicine, which singled out fat and cholesterol as the dietary causes of CHD and downplayed evidence that sucrose consumption was also a risk factor. The SRF set the review's objective, contributed articles for inclusion, and received drafts. The SRF's funding and role was not disclosed. Together with other recent analyses of sugar industry documents, our findings suggest the industry sponsored a research program in the 1960s and 1970s that successfully cast doubt about the hazards of sucrose while promoting fat as the dietary culprit in CHD. Policymaking committees should consider giving less weight to food industry-funded studies and include mechanistic and animal studies as well as studies appraising the effect of added sugars on multiple CHD biomarkers and disease development.

Canberra semiconductor, an industrial partner for physics research

International Nuclear Information System (INIS)

Verplancke, J.; Burger, P.; Schoenmaekers, W.

1990-01-01

Canberra semiconductor produces germanium and silicon solid state detectors for nuclear radiation. Its business domain covers the production of standard detectors on an industrial basis, for industrial and applied physics applications, as well as the development of special detectors and electronics, tailored to the needs of a particular application, in science and research. There exists an important and beneficial interaction between these two activities. (orig.)

ONR (Office of Naval Research) Far East Scientific Bulletin. Volume 9, Number 4, October-December 1984,

Science.gov (United States)

1984-12-01

Faculty of Engineering Science Toyonaka, Osaka 560 . Professor Susumu Namba Associate Professor Kenji Gamo Dr. Mikio Takai Research Activities...hydrographic measurements. K. Sato , M. Ooe, International Latitude Observatory of Mizusawa, and T. Teramoto, University of Tokyo, Japan, provided ye

Consumer attitudes to radiation and irradiated potatoes at ``Radiation Fair'' in Osaka, Japan

Science.gov (United States)

Furuta, Masakazu; Hayashi, Toshio; Hosokawa, Yasushi; Kakefu, Tomohisa; Nishihara, Hideaki

1998-06-01

"Radiation Fair" has been held in summer vacation season in August for more than 10 years in Osaka, the largest city of western Japan, for the purpose of public education and information transfer of radiation and radiation-related technology. We distributed questionnaires to the visitors for recent 3 years to inquire their status toward radiation and irradiated products including irradiated potatoes as well as impression toward the displays. According to the survey results, more than 60% of the kids visitors were satisfied with this exhibition as informative, more than half of the older visitors (16 years old and upward) indicated that they recognized the word of "radiation" when they were at elementary school and the most significant sources of this information were school lessons and the mass media. Consumer's image toward radiation seems to shift to more "positive" when correct knowledge about radiation is given. More than half of consumers did not know "irradiated potatoes" but the percentage indicating that irradiated potatoes was definitely hazardous was less than 10%.

Consumer attitudes to radiation and irradiated potatoes at 'Radiation Fair' in Osaka, Japan

International Nuclear Information System (INIS)

Furuta, Masakazu; Hayashi, Toshio; Hosokawa, Yasushi; Kakefu, Tomohisa; Nishihara, Hideaki

1998-01-01

'Radiation Fair' has been held in summer vacation season in August for more than 10 years in Osaka, the largest city of western Japan, for the purpose of public education and information transfer of radiation and radiation-related technology. We distributed questionnaires to the visitors for recent 3 years to inquire their status toward radiation and irradiated products including irradiated potatoes as well as impression toward the displays. According to the survey results, more than 60% of the kids visitors were satisfied with this exhibition as informative, more than half of the older visitors (16 years old and upward) indicated that they recognized the word of 'radiation' when they were at elementary school and the most significant sources of this information were school lessons and the mass media. Consumer's image toward radiation seems to shift to more 'positive' when correct knowledge about radiation is given. More than half of consumers did not know 'irradiated potatoes' but the percentage indicating that irradiated potatoes was definitely hazardous was less than 10%

2008-2010 Research Summary: Analysis of Demand Response Opportunities in California Industry

Energy Technology Data Exchange (ETDEWEB)

Goli, Sasank [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Olsen, Daniel [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); McKane, Aimee [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Piette, Mary Ann [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2011-08-01

This report describes the work of the Industrial Demand Response (DR) Team of Lawrence Berkeley National Laboratory’s Demand Response Research Center (DRRC) from 2008-2010, in the context of its mandate to conduct and disseminate research that broadens the knowledge base of DR strategies, with a focus on the Industrial-Agricultural-Water (IAW) sector. Through research and case studies of industrial sectors and entities, the DRRC-IAW Team continued to assimilate knowledge on the feasibility of industrial DR strategies with an emphasis on technical and economic evaluation and worked to encourage implementation of these strategies.

Industry and forest wetlands: Cooperative research initiatives

International Nuclear Information System (INIS)

Shepard, J.P.; Lucier, A.A.; Haines, L.W.

1993-01-01

In 1989 the forest products industry responded to a challenge of the National Wetlands Policy Forum to initiate a cooperative research program on forest wetlands management organized through the National Council of the Paper Industry for Air and Stream Improvement (NCASI). The objective is to determine how forest landowners can manage wetlands for timber production while protecting other wetland functions such as flood storage, water purification, and food chain/wildlife habitat support. Studies supported by the NCASI in 9 states are summarized. Technical support on wetland regulatory issues to member companies is part of the research program. Since guidelines for recognizing wetlands for regulatory proposed have changed frequently, the NCASI has recommend an explicit link between wetland delineation and a classification system that considers difference among wetland types in vegetation, soils, hydrology, appearance, landscape position, and other factors. 16 refs

Industry 4.0 implies lean manufacturing: Research activities in industry 4.0 function as enablers for lean manufacturing

Directory of Open Access Journals (Sweden)

Adam Sanders

2016-09-01

Full Text Available Purpose: Lean Manufacturing is widely regarded as a potential methodology to improve productivity and decrease costs in manufacturing organisations. The success of lean manufacturing demands consistent and conscious efforts from the organisation, and has to overcome several hindrances. Industry 4.0 makes a factory smart by applying advanced information and communication systems and future-oriented technologies. This paper analyses the incompletely perceived link between Industry 4.0 and lean manufacturing, and investigates whether Industry 4.0 is capable of implementing lean. Executing Industry 4.0 is a cost-intensive operation, and is met with reluctance from several manufacturers. This research also provides an important insight into manufacturers’ dilemma as to whether they can commit into Industry 4.0, considering the investment required and unperceived benefits. Design/methodology/approach: Lean manufacturing is first defined and different dimensions of lean are presented. Then Industry 4.0 is defined followed by representing its current status in Germany. The barriers for implementation of lean are analysed from the perspective of integration of resources. Literatures associated with Industry 4.0 are studied and suitable solution principles are identified to solve the abovementioned barriers of implementing lean. Findings: It is identified that researches and publications in the field of Industry 4.0 held answers to overcome the barriers of implementation of lean manufacturing. These potential solution principles prove the hypothesis that Industry 4.0 is indeed capable of implementing lean. It uncovers the fact that committing into Industry 4.0 makes a factory lean besides being smart. Originality/value: Individual researches have been done in various technologies allied with Industry 4.0, but the potential to execute lean manufacturing was not completely perceived. This paper bridges the gap between these two realms, and identifies

An agenda for research on the relationships between industrial design and performance

NARCIS (Netherlands)

Candi, M.; Gemser, G.

2010-01-01

This article proposes a research agenda for studying the relationships between industrial design and performance in the context of new product/service development. A review of existing research on relationships between industrial design and performance is used as a basis for identifying research

West African Journal of Industrial and Academic Research ...

African Journals Online (AJOL)

Computer networks, Satellite & communications Engineering Research • Industrial Computer applications ... Information Assurance & Network Security: The African Dilemma ... E-Waste Management Environmental Protection • Management ...

Positioning and Priorities of Growth Management in Construction Industrialization: Chinese Firm-Level Empirical Research

Directory of Open Access Journals (Sweden)

Jingxiao Zhang

2017-06-01

Full Text Available The purpose of this research is to quantitatively evaluate the growth phase, position, and priorities of the industrialization policy management of the construction industry at firm level. The goal is to integrate quantitative dynamics into the policy-making process for sustainable policy development in future China. This research proposes an integrated framework, including growth management model and industrial policy evaluation method, to identify the challenges of construction industrialization and policy management. The research applies the mixed system method, which includes entropy method and average score method, to analyze the growth stage and major impact indexes targeting 327 survey samples. The empirical results show that the proposed conceptual framework and policy evaluation method could effectively determine the growth position and directions of the construction industrialization. For verification purpose, the study uses the local industry data from Shaanxi Province, China. The calculation results substantiate that the construction industry is in the middle section of the third growth phase. The comparison of the results from statistical methods shows that the local construction industry still needs substantial effort in policy management to improve its sustainable industrialization level. As countermeasures, the policy priorities should concentrate on: (1 enhancing effective cooperation among universities, research institutions and enterprises; (2 improving actions towards technology transfer into productivity; and (3 encouraging market acceptance of construction industrialization. This research complements the existing literature of policy evaluation of construction industrialization. Moreover, it provides theoretical and operational steps on industry policy evaluation and growth management framework, with accurate and ample data analysis on firm-level survey. Researchers and policy makers can use this research for further

Research into industrial technology policy trends in Australia. Role of government in promoting industry

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The paper reported the investigation into strategies of industrial technology, results of the R and D support plans, management of support fund plans, etc. by the Australian government. The present government introduced policies on industrial innovation and industrial technology, research and higher education, etc. from the end of 1997 to the end of 1999. Especially, recently the R and D preferential taxation system was introduced. As to organizations pertaining to science, technology, engineering and innovation, PMSEIC (prime minister's science, engineering and innovation council) under the direct control of prime minister is a top self-supporting organization, in which minister from each ministry join. Further, the assembly committee, which is not the bureaucratic organization, was separately established. In February 2000, the innovation summit was held, in which a lot of organizations from the industrial circle, government and research institutes participated. The conclusion was as follows: Australia is now at the crossroads of the resource dependent economy. The solution adopted in the past cannot meet the age of new knowledge. The rapidly advancing globalization makes the society more competitive. Enterprises that avoid the innovative investment are to expose themselves to danger. Australia is requested to make continued efforts for more innovative creation. (NEDO)

Research into industrial technology policy trends in Australia. Role of government in promoting industry

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The paper reported the investigation into strategies of industrial technology, results of the R and D support plans, management of support fund plans, etc. by the Australian government. The present government introduced policies on industrial innovation and industrial technology, research and higher education, etc. from the end of 1997 to the end of 1999. Especially, recently the R and D preferential taxation system was introduced. As to organizations pertaining to science, technology, engineering and innovation, PMSEIC (prime minister's science, engineering and innovation council) under the direct control of prime minister is a top self-supporting organization, in which minister from each ministry join. Further, the assembly committee, which is not the bureaucratic organization, was separately established. In February 2000, the innovation summit was held, in which a lot of organizations from the industrial circle, government and research institutes participated. The conclusion was as follows: Australia is now at the crossroads of the resource dependent economy. The solution adopted in the past cannot meet the age of new knowledge. The rapidly advancing globalization makes the society more competitive. Enterprises that avoid the innovative investment are to expose themselves to danger. Australia is requested to make continued efforts for more innovative creation. (NEDO)

Research and technology management in the electricity industry methods, tools and case studies

CERN Document Server

Daim, Tugrul; Kim, Jisun

2013-01-01

Technologies such as renewable energy alternatives including wind, solar and biomass, storage technologies and electric engines are creating a different landscape for the  electricity industry. Using sources and ideas from technologies such as renewable energy alternatives, Research and Technology Management in the Electricity Industry explores a different landscape for this industry and applies it to the electric industry supported by real industry cases. Divided into three sections, Research and Technology Management in the Electricity Industry introduces a range of  methods and tools includ

MATWIN: bridging the gap between academic research and industry.

Science.gov (United States)

Reiffers, Josy; Robert, Lucia

2015-09-16

MATWIN (Maturation and Accelerating Translation With INdustry) is part of the nationwide effort to support cancer innovation. This unique program is willing to support innovative research projects providing tools, resources, and staff dedicated to project leaders wishing to optimize the industrial attractiveness of their project. The overall objective is clear: fight cancer always more effectively.

Academic Centers and/as Industrial Consortia: US Microelectronics Research 1976-2016

NARCIS (Netherlands)

Mody, Cyrus C.M.

2017-01-01

In the U.S., in the late 1970s and early 1980s, academic research centers that were tightly linked to the semiconductor industry began to proliferate – at exactly the same time as the first academic start-up companies in biotech, and slightly before the first U.S. industrial semiconductor research

Industry, university and government partnership to address research, education and human resource challenges for nuclear industry in Canada

International Nuclear Information System (INIS)

Mathur, R.M.

2004-01-01

Full text: This paper describes the outcome of an important recent initiative of Canadian nuclear industry to reinvigorate interest in education and collaborative research in prominent Canadian universities. This initiative has led to the formation of the University Network of Excellence in Nuclear Engineering (UNENE), incorporated in 2002. During the recent past, the slowdown in nuclear power development in Canada has curtailed the demand for new nuclear professionals down to a trickle. Without exciting job opportunities in sight the interest of prospective students in nuclear education and research has plunged. Consequently, with declining enrolment in nuclear studies and higher demand from competing disciplines, most universities have found it difficult to sustain nuclear programs. As such the available pool of graduating students is small and insufficient to meet emerging industry demand. With nuclear industry employees' average age hovering around mid-forties and practically no younger cohort to back up, nuclear industry faces the risk of knowledge loss and significant difficulty in recruiting new employees to replenish its depleting workforce. It is, therefore, justifiably concerned. Also, since nuclear generation is now the purview of smaller companies, their in-house capability for mid- to longer-term research is becoming inadequate. Recognizing the above challenges, Ontario Power Generation, Bruce Power and Atomic Energy of Canada Limited have formed an alliance with prominent Canadian universities and undertaken to invest money and offer in-kind support to accomplish three main objectives: Reinvigorate university-based nuclear engineering research by augmenting university resources by creating new industry supported research professorships and supporting research of other professors; Promote enrolment in graduate programs by supporting students and making use of a course-based Master of Engineering (M.Eng.) Program that is taught collectively by

Ties that bind: multiple relationships between clinical researchers and the pharmaceutical industry.

Science.gov (United States)

Henry, David; Doran, Evan; Kerridge, Ian; Hill, Suzanne; McNeill, Paul M; Day, Richard

2005-11-28

It is believed that pharmaceutical industry sponsorship of clinical research leads to the development of multiple ties between clinicians and the pharmaceutical industry. To quantify this relationship we conducted a survey of medical specialists listed in the Medical Directory of Australia in 2002 and 2003. A questionnaire was mailed that elicited information about all aspects of research relationships between clinicians and pharmaceutical companies. The odds of reporting multiple additional ties (financial and professional) with pharmaceutical companies by clinicians who had an active research relationship were compared with those who did not. All clinicians who returned a completed questionnaire about their research activities were included in the study. A questionnaire was mailed to 2120 medical specialists; 823 (39%) responded. Of these, 338 (41%) reported involvement in industry-sponsored research in the previous year. They were more likely than others to have been offered industry-sponsored items or activities valued at more than 500 AU dollars (>382 US dollars; odds ratio [OR], 3.5; 95% confidence interval [CI], 2.6-4.7) and support for attending international conferences (OR, 5.4; 95% CI, 3.9-7.4). The strongest associations were seen for acting as a paid consultant to industry (OR, 9.0; 95% CI, 3.9-20.4) and for membership on advisory boards (OR, 6.9; 95% CI, 5.1-9.6). There was a strong relationship between research collaboration and accumulation of industry ties. For 1 additional tie the OR was 2.2 (95% CI, 1.2-3.8) and rose to 6.3 (95% CI, 3.5-11.1) with 3 ties and 41.8 (95% CI, 14.5-143.4) with 6 or more ties. Medical specialists who have research relationships with the pharmaceutical industry are much more likely to have multiple additional ties than those who do not have research relationships. Institutional review should discourage clinical researchers from developing multiple ties.

Research by industry at the National Synchrotron Light Source

International Nuclear Information System (INIS)

1995-05-01

The world's foremost facility for research using x-rays and ultraviolet and infrared radiation, is operated by the National Synchrotron Light Source dept. This pamphlet described the participating research teams that built most of the beam lines, various techniques for studying materials, treatment of materials, and various industrial research (catalysis, pharmaceuticals, etc.)

Alcohol research and the alcoholic beverage industry: issues, concerns and conflicts of interest.

Science.gov (United States)

Babor, Thomas F

2009-02-01

Using terms of justification such as 'corporate social responsibility' and 'partnerships with the public health community', the alcoholic beverage industry (mainly large producers, trade associations and 'social aspects' organizations) funds a variety of scientific activities that involve or overlap with the work of independent scientists. The aim of this paper is to evaluate the ethical, professional and scientific challenges that have emerged from industry involvement in alcohol science. Source material came from an extensive review of organizational websites, newspaper articles, journal papers, letters to the editor, editorials, books, book chapters and unpublished documents. Industry involvement in alcohol science was identified in seven areas: (i) sponsorship of research funding organizations; (ii) direct financing of university-based scientists and centers; (iii) studies conducted through contract research organizations; (iv) research conducted by trade organizations and social aspects/public relations organizations; (v) efforts to influence public perceptions of research, research findings and alcohol policies; (vi) publication of scientific documents and support of scientific journals; and (vii) sponsorship of scientific conferences and presentations at conferences. While industry involvement in research activities is increasing, it constitutes currently a rather small direct investment in scientific research, one that is unlikely to contribute to alcohol science, lead to scientific breakthroughs or reduce the burden of alcohol-related illness. At best, the scientific activities funded by the alcoholic beverage industry provide financial support and small consulting fees for basic and behavioral scientists engaged in alcohol research; at worst, the industry's scientific activities confuse public discussion of health issues and policy options, raise questions about the objectivity of industry-supported alcohol scientists and provide industry with a

Fiscal 1999 achievement report on the venture business assisting type regional consortium - Minor business creation base type. Development of environmentally friendly chromium-free plating technology and research on its practical application; 1999 nendo chiiki consortium kenkyu kaihatsu jigyo seika hokokusho. Kankyo ni yasashii kuromu daitai mekki gijutsu kaihatsu to sono jitsuyoka kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

In this research, the seeds provided by Technology Research Institute of Osaka Prefecture and Nomura Plating Co., Ltd., relative to their plating processes using ion exchange membranes and metal anodes are utilized. Efforts are made to prolong the bathing life of the Ni-W alloy plating solution, to put the plating bath in an enclosure, to develop a chromium-free plating technology wherewith bating life is longer, environmental impact is smaller, and resistance to corrosion is higher, and experiments and tests are conducted for industrialization and for the practical application of the developed technologies. At Technology Research Institute of Osaka Prefecture, electrolytic Ni-W alloy plating was taken up. An insoluble anode separated from the plating solution by a cation exchange membrane and plural metal anodes were brought into a new process and, into the same, novel technologies were further introduced, which were a metal ion supply method in which the distribution of current to 3 anodes was regulated and the employment of a sacrificial anode decomposition agent. The new process was investigated for its validity and difficulties. Furthermore, Ni-W-P alloy plating was studied and a mirror-like Ni-W-P alloy plate was developed in a phosphorous acid added bath without detriment to the non-waste solution plating process, and the plate exhibited high corrosion resistance in a CASS (copper-accelerated acetic acid salt spray) test. (NEDO)

A new context for the nuclear research and industry

International Nuclear Information System (INIS)

2000-01-01

Pascal Colombani, general administrator of the CEA, develops in this presentation the situation of the nuclear industry to introduce the new orientations of the CEA group. The energy context, the deregulation impacts, the energy dependence and the greenhouse effect project are discussed before the presentation of the research programs and the necessary reorganizing of the nuclear industry. (A.L.B.)

Estimation of underground structures in the Osaka-Kobe area by array-network observations of microtremors; Bido no array kansoku ni yoru Osaka-Hyogo chiiki no chika kozo no suitei

Energy Technology Data Exchange (ETDEWEB)

Okada, H; Ishikawa, K; Ling, S [Hokkaido University, Sapporo (Japan); Sasabe, K [Ministry of Construction, Tokyo (Japan)

1997-05-27

Microtremor observations have been carried out with an objective to estimate underground structures including the foundation depth in the Osaka-Kobe area which has been greatly damaged by the Hyogoken-nanbu earthquake in 1995. Different organizations have made seismic surveys and boring investigations in this area, by which elucidation has been made on the underground structures. The present observations are intended to identify S-wave velocity distribution in a wide area from the ground surface to the foundation, which is difficult to be verified by using conventional surveys and investigations. Methods to detect surface waves which are contained in microtremors include the frequency-wave number method (the F-K method) and the spatial autocorrelation method (the SPAC method). The SPAC method can estimate phase velocities of longer waves for the size of an array than with the F-K method, and is more advantageous in estimating ground structures at greater depths. S-wave velocity structure was estimated down to the foundation rocks existing in depths of about 0.5 to 2.0 km. For estimating the phase velocities in Raleigh waves, the SPAC method and the expanded spatial autocorrelation method were used. The underground structures thus derived showed a good agreement with the results of explorations using other methods. 8 figs., 1 tab.

Assessment of industry needs for oil shale research and development

Energy Technology Data Exchange (ETDEWEB)

Hackworth, J.H.

1987-05-01

Thirty-one industry people were contacted to provide input on oil shale in three subject areas. The first area of discussion dealt with industry's view of the shape of the future oil shale industry; the technology, the costs, the participants, the resources used, etc. It assessed the types and scale of the technologies that will form the industry, and how the US resource will be used. The second subject examined oil shale R D needs and priorities and potential new areas of research. The third area of discussion sought industry comments on what they felt should be the role of the DOE (and in a larger sense the US government) in fostering activities that will lead to a future commercial US oil shale shale industry.

Research and photovoltaic industry at the United States; Recherche et industrie photovoltaique (PV) aux Etats-Unis

Energy Technology Data Exchange (ETDEWEB)

Lerouge, Ch; Herino, R; Delville, R; Allegre, R

2006-06-15

For a big country as the United States, the solar energy can be a solution for the air quality improvement, the greenhouse gases fight and the reduction of the dependence to the imported petroleum and also for the economic growth by the increase of the employment in the solar industry sector. This document takes stock on the photovoltaic in the United States in the industrial and research domains. The american photovoltaic industry is the third behind the Japan and the Germany. (A.L.B.)

Visual Narrative Research Methods as Performance in Industrial Design Education

Science.gov (United States)

Campbell, Laurel H.; McDonagh, Deana

2009-01-01

This article discusses teaching empathic research methodology as performance. The authors describe their collaboration in an activity to help undergraduate industrial design students learn empathy for others when designing products for use by diverse or underrepresented people. The authors propose that an industrial design curriculum would benefit…

Responsible Research and Innovation in industry-challenges, insights and perspectives

NARCIS (Netherlands)

Martinuzzi, André; Blok, Vincent; Brem, Alexander; Stahl, Bernd; Schönherr, Norma

2018-01-01

The responsibility of industry towards society and the environment is a much discussed topic, both in academia and in business. Responsible Research and Innovation (RRI) has recently emerged as a new concept with the potential to advance this discourse in light of two major challenges industry is

Research and industrial application of x-ray photoelectron spectroscopy (XPS) in Malaysia

International Nuclear Information System (INIS)

Mohd Ambar Yarmo; Abd Razak Daud; Abdul Kariem Arof

2000-01-01

As a developing country, Malaysia is fully committed to research and development especially for industrial development. One of priority fields is advanced materials and surface analysis of such materials is an important aspect in research. Among the tools for surface science analysis is x-ray photoelectron spectroscopy (XPS) which can be considered new to this country. The industrial sector is also keen to solve their problems and developing their products using XPS. The microelectronic and electrical industries are interested in solving problems related to metal-metal joining , gold silica peeling, surface corrosion and surface coating. The glove industry uses XPS to solve problems due to staining and color fading of their products. Research conducted in universities and research institutes that mainly deal with catalysis, membranes for fuel cells, sensors, batteries, corrosion phenomena and interface interaction in coating finds XPS a useful technique for surface studies. Specific examples from various sectors will be presented in this paper. (Author)

West African Journal of Industrial and Academic Research ...

African Journals Online (AJOL)

Prof. Osuagwwu

West African Journal of Industrial and Academic Research December 2016 v0l. ... 1Civil Engineering Department, Collage of Science and Engineering .... P.K. Guha (2009) maintenance and Repairs of Buildings published by new central Book ...

Tobacco industry consumer research on socially acceptable cigarettes.

Science.gov (United States)

Ling, P M; Glantz, S A

2005-10-01

To describe tobacco industry consumer research to inform the development of more "socially acceptable" cigarette products since the 1970s. Analysis of previously secret tobacco industry documents. 28 projects to develop more socially acceptable cigarettes were identified from Philip Morris, RJ Reynolds, British American Tobacco, and Lorillard tobacco companies. Consumer research and concept testing consistently demonstrated that many smokers feel strong social pressure not to smoke, and this pressure increased with exposure to smoking restrictions. Tobacco companies attempted to develop more socially acceptable cigarettes with less visible sidestream smoke or less odour. When presented in theory, these product concepts were very attractive to important segments of the smoking population. However, almost every product developed was unacceptable in actual product tests or test markets. Smokers reported the complete elimination of secondhand smoke was necessary to satisfy non-smokers. Smokers have also been generally unwilling to sacrifice their own smoking satisfaction for the benefit of others. Many smokers prefer smoke-free environments to cigarettes that produce less secondhand smoke. Concerns about secondhand smoke and clean indoor air policies have a powerful effect on the social acceptability of smoking. Historically, the tobacco industry has been unable to counter these effects by developing more socially acceptable cigarettes. These data suggest that educating smokers about the health dangers of secondhand smoke and promoting clean indoor air policies has been difficult for the tobacco industry to counter with new products, and that every effort should be made to pursue these strategies.

Wind power - research and development. The wind turbine industry's view of the promotion of state-supported research and development

International Nuclear Information System (INIS)

Kroh, S.

1995-10-01

The windmill industry in Denmark is currently confronted with making a choice between competing technologies so that the role of the stimulus of state subsidies for research has lately increased in importance. The Ministry of Energy, it is claimed, must be aware of this as possibilities for making use of research results are dictated by the market and competition. The industry is not sympathetic to the idea of state research contracts with specified goals for which manufacturers must produce a technical solution. Consultancy firms should work towards solving general problems which could help the industry as a whole. Wind turbines which are cheap to produce and operate are of more interest to industry than those which are technologically advanced or of a lighter construction. It is not thought to be advantageous to concentrate the allocation of subsidies on one key project chosen by the Ministry itself, such as the current intense interest in turbine blades. Aerodynamics, noise pollution and materials are considered as more vital areas for research. A special interest in smaller windmills is not currently relevant. Evaluations of the quality of research projects demanding subsidies should be more critical. A detailed list of subjects within this field which are considered as being relevant for research is given. The Danish windmill industry advises a centralized wind power research institution and a gradual shift of the test station at Risoe National Laboratory to Jutland as wind conditions at Risoe are not considered satisfactory. A better communication between Risoe test station and the wind power industry is recommended. (AB)

Creative Research: The Theory and Practice of Research for the Creative Industries

OpenAIRE

Best, Kathryn

2011-01-01

When conducting research in and for the creative industries, there are a wealth of different possible research approaches that can be taken - reflecting the diverse nature of the disciplines (design, arts and crafts, advertising, architecture, fashion, film, music, TV, radio performing arts, publishing and interactive software) and academic contexts (art schools, business schools and universities) involved. The result is that there are variations in the emphasis and approach taken to how stud...

Forest industries energy research

Energy Technology Data Exchange (ETDEWEB)

Scott, G. C.

1977-10-15

Data on energy use in the manufacturing process of the wood products industry in 1974 are tabulated. The forest industries contributed 10% of New Zealand's factory production and consumed 25% of all industrial energy (including that produced from self-generated sources such as waste heat liquors and wood wastes) in that year. An evaluation of the potential for savings in process heat systems in existing production levels is shown to be 3% in the short, medium, and long-term time periods. The industry has a high potential for fuel substitution in all sectors. The payback periods for the implementation of the conservation measures are indicated.

The South African National Accelerator Centre and its research programme

Energy Technology Data Exchange (ETDEWEB)

Watanabe, Y. [Kyushu Univ., Fukuoka (Japan)

1997-03-01

An overview of the South African National Accelerator Centre and its research activities is given with emphasis on medium energy nuclear physics and nuclear data measurements for medical use. Also presented is a preliminary result of {sup 40}Ca(p,p`x) spectrum measurement for 392 MeV which has been carried out at RCNP, Osaka University, under the South Africa-Japan collaborative programme. (author)

Industry interests in gambling research: Lessons learned from other forms of hazardous consumption.

Science.gov (United States)

Cowlishaw, S; Thomas, S L

2018-03-01

Research indicates that the evidential bases for many harm reduction policies targeting hazardous consumptions (including tobacco, alcohol and gambling) have been distorted by commercial industries that derive revenue from such commodities. These distortions are best illustrated by research on tobacco and alcohol, which indicates similar tactics used by industries to determine favourable policy environments through engineering of evidence, among other approaches. Although there is concern that gambling research is similarly vulnerable to commercial interests, the relevant literature lags far behind other fields and the aim of this paper is to increase familiarity with tactics used by industries for influencing research. It summarises the conceptual and empirical bases for expecting conflicts between goals of public health and companies that profit from hazardous consumptions. It also summarises evidence describing practices deployed by tobacco corporations, which include third-party techniques and the selective funding of research to manufacture doubt and deflect attention away from the consequences of smoking. It then reviews both early and emerging evidence indicating similar strategies used by alcohol industry, and uses this literature to view practices of the gambling industry. It argues that parallels regarding selective funding of research and third-party techniques provide grounds for strong concern about commercial influences on gambling research, and implementation of precautionary approaches to management of vested interests. Copyright © 2017 Elsevier Ltd. All rights reserved.

Logistics research report : Framework in the healthcare industry

NARCIS (Netherlands)

Willems, A.; Hajdasinski, A.K.; Willems, J.

2009-01-01

The research report takes the perspective of Information Logistics and investigates relating concepts like Knowledge Management, Information Systems and Context Awareness in the context of the healthcare industry. The aim of Information Logistics is to deliver the right information product, in the

7 CFR 1220.230 - Promotion, research, consumer information, and industry information.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Promotion, research, consumer information, and...), DEPARTMENT OF AGRICULTURE SOYBEAN PROMOTION, RESEARCH, AND CONSUMER INFORMATION Soybean Promotion and Research Order Expenses and Assessments § 1220.230 Promotion, research, consumer information, and industry...

Design for energy efficiency: Energy efficient industrialized housing research program. Progress report

Energy Technology Data Exchange (ETDEWEB)

Kellett, R.; Berg, R.; Paz, A.; Brown, G.Z.

1991-03-01

Since 1989, the U.S. Department of Energy has sponsored the Energy Efficient Industrialized Housing research program (EEIH) to improve the energy efficiency of industrialized housing. Two research centers share responsibility for this program: The Center for Housing Innovation at the University of Oregon and the Florida Solar Energy Center, a research institute of the University of Central Florida. Additional funding is provided through the participation of private industry, state governments and utilities. The program is guided by a steering committee comprised of industry and government representatives. This report summarizes Fiscal Year (FY) 1990 activities and progress, and proposed activities for FY 1991 in Task 2.1 Design for Energy Efficiency. This task establishes a vision of energy conservation opportunities in critical regions, market segments, climate zones and manufacturing strategies significant to industrialized housing in the 21st Century. In early FY 1990, four problem statements were developed to define future housing demand scenarios inclusive of issues of energy efficiency, housing design and manufacturing. Literature surveys were completed to assess seven areas of influence for industrialized housing and energy conservation in the future. Fifty-five future trends were identified in computing and design process; manufacturing process; construction materials, components and systems; energy and environment; demographic context; economic context; and planning policy and regulatory context.

[A critical assessment of the relation between the food industry and health research].

Science.gov (United States)

León Mengíbar, Josep; Pastor-Valero, María; Hernández Aguado, Ildefonso

To describe the influence of the food industry in health research, observing how funding influences health outcomes and the quality of the studies. We performed a systematic review in MEDLINE, Cochrane Library Plus and Scopus using the MESH "Food Industry", "Food-Processing Industry", "Biomedical Research", "Research Support as Topic", and the keywords "Industry Sponsorship" and "Funding Source". The quality was assessed using the PRISMA guidelines. We revised 1,506 articles and 10 were included; two reviewed the relationship between funding-outcomes and quality-outcomes; six focused on the funding-outcomes relationship; and the other two focused on methodological quality. Six showed that funding from the food industry resulted in more favourable outcomes for their products. No differences in quality were found in relation to the funding source, but those which did not declare their funding had a worse quality. Studies funded by the food industry showed favourable results for their products. However, this fact did not affect the quality of the studies. Copyright © 2017 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

CUEPRA-Clemson University electric power research association: An industry/university partnership for excellence in power engineering education and research

International Nuclear Information System (INIS)

Girgis, A.A.; Makram, E.B.; Cline, M.L.; Fortson, H.S.

1993-01-01

A unique structure for the Clemson University Electric Power Research Association (CUEPRA) has been established to promote electric power system research and to meet the need for a working communication link between the power industry and the academic community. This paper presents the power industries involvement in the power program at Clemson University and the strategic improvements that have been accomplished in research and education

STUDY OF TRENDS AND PERSPECTIVES OF INDUSTRIAL ENGINEERING RESEARCH

Directory of Open Access Journals (Sweden)

H. Dastkhan

2012-01-01

Full Text Available

ENGLISH ABSTRACT: Industrial engineering is an engineering discipline which, because of its multi-disciplinary nature, has played an important role in the development and optimization of different systems at macro and micro levels. In this paper, the results of a research to study the position and trend of Industrial Engineering research in recent years are described. The data from a sample of 7 114 IE-related articles from international journals during the last 27 years were used for the analysis. The results showed that the development of IE in many countries has a strong correlation with their industrial and economic development. However, IE research topics are spreading in other management and engineering departments and so there is a need to redefine the discipline and its specific areas of interest. According to the prediction made using time series analysis, the most favorite fields of IE research in future will be on subjects related to information technology, intelligent systems, optimization, quality, and supply chain management.

AFRIKAANSE OPSOMMING: Bedryfsingenieurswese is 'n ingenieursdissipline wat vanweë die multi-dissiplinêre aard daarvan 'n belangrike rol gespeel het in die optimisering van verskillende sisteme op makroen mikrovlak. Hierdie artikel hou die resultate voor van 'n navorsingsprojek wat onderneem is om die posisie en rigting van Bedryfsingenieursnavorsing in onlangse jare te bepaal. Die data van 'n monster van 7 114 Bedryfsingenieursverwante artikels wat verskyn het in internasionale joernale oor die afgelope 27 jaar is gebruik vir die ontleding. Die resultate toon dat die groei van Bedryfsingenieurswese in verskeie lande sterk korreleer met industriële en ekonomiese ontwikkeling. Tog blyk dit dat die navorsingsonderwerpe van Bedryfsingenieurswese sprei na ander bestuurs- en ingenieursdepartemente en dus bestaan daar ‘n nodigheid om die dissipline en die spesifieke belangstellingsvelde te herdefinieer

Determination of effective university-industry joint research for photovoltaic technology transfer (UIJRPTT) in Thailand

International Nuclear Information System (INIS)

Sugandhavanija, Pornpimol; Sukchai, Sukruedee; Ketjoy, Nipon; Klongboonjit, Sakol

2011-01-01

Most of the literatures related to university-industry (U-I) and technology transfer assume that the collaboration particularly the U-I joint research is beneficial to both university and industry which as a result underpins the sustainable development of economics and living standards of developed and developing countries. The U-I joint research for photovoltaic technology transfer in a developing country like Thailand should have been increased considering the fact that (i) the government implemented various strategies to support the renewable energy research and market development, (ii) the university aimed to be ''research-based university and (iii) the Thai photovoltaic industry struggle for competitiveness and survival in the global market. However, evidence revealed that the university and industry conducted little number of U-I joint projects. In this paper, we investigate the factors influencing the effective U-I joint research for photovoltaic technology transfer (UIJRPTT). In an attempt to better understand the influence of the factors, the path model with factors related to characteristics and perspectives of the university and the industry as well as joint research mechanism and their linkages to higher growth and improved economic and quality performance of the U-I joint research is developed and validated. The developed model empirically explains interaction between the factors and the outcome factors and can assist the government, the university and the industry to devise target strategies to improve the growth and performance of UIJRPTT. (author)

A review of present research, research needs, and research capabilities related to the uranium mining and milling industry in Canada

International Nuclear Information System (INIS)

Woods, R.J.

1981-01-01

This report surveys the views of those associated with uranium mining in northern Saskatchewan on the research needs of the industry. Research resources, both human and material, available in the province are outlined. The author makes recommendations that would lead to a viable uranium research program. Appendices list information on current uranium-related research in Saskatchewan and available research resources

Major Change in the Predominant Type of “Norwalk-Like Viruses” in Outbreaks of Acute Nonbacterial Gastroenteritis in Osaka City, Japan, between April 1996 and March 1999

Science.gov (United States)

Iritani, Nobuhiro; Seto, Yoshiyuki; Haruki, Kosuke; Kimura, Masatsugu; Ayata, Minoru; Ogura, Hisashi

2000-01-01

In Osaka City, Japan, between April 1996 and March 1999, a total of 350 fecal specimens from 64 outbreaks of acute nonbacterial gastroenteritis were examined to investigate infection by “Norwalk-like viruses” (NLVs). By reverse transcription (RT)-PCR, 182 samples (52.0%) from 47 outbreaks (73.4%) were NLV positive. During those three years, the incidence of NLV-associated outbreaks showed seasonality, being higher during January to March (winter to early spring). The ingestion of contaminated oysters was the most common transmission mode (42.6%). The amplicons of the 47 outbreak strains that were NLV positive by RT-PCR were tested using Southern hybridization with four probe sets (Ando et al., J. Clin. Microbiol. 33:64–71, 1995). Forty of the outbreak strains were classified as 4 probe 1-A (P1-A) strains, 6 P1-B strains, 10 P2-A strains, 17 P2-B strains, and 3 untypeable strains, and the other 7 outbreaks were determined to be mixed-probe-type strains. Probe typing and partial sequence analysis of the outbreak strains indicated that a predominant probe type of NLVs in Osaka City had drastically changed; P2-B strains (77.8%) with multiple genetic clusters were observed during the 1996–97 season, the P2-A common strain (81.3%) related to the Toronto virus cluster was observed during the 1997–98 season, and P1-B strains (75.0%) with a genetic similarity were observed during the 1998–99 season. For the three untypeable outbreak strains (96065, 97024, and 98026), the 98026 outbreak strain had Southampton virus (SOV)-like sequences, and each of the other outbreak strains had a unique 81-nucleotide sequence. Newly designed probes (SOV probe for the 98026 outbreak strain and the 96065 probe for the 96065 and 97024 outbreak strains) were hybridized with relative strains and without other probe type strains. The prevalent NLV probe types in Osaka City during those three years were classified in six phylogenetic groups: P1-A, P1-B, P2-A, P2-B, SOV, and 96065 probe

Industry Research and Recommendations for New Commercial Buildings

Energy Technology Data Exchange (ETDEWEB)

Hendron, B.; Leach, M.; Gregory, N.; Pless, S.; Selkowitz, S.; Matthew, P.

2014-05-01

Researchers evaluated industry needs and developed logic models to support possible future commercial new construction research and deployment efforts that could be led or supported by DOE's Commercial Building Integration program or other national initiatives. The authors believe that these recommendations support a proposed course of action from the current state of commercial building energy efficiency to a possible long-term goal of achieving significant market penetration of cost-effective NZE buildings in all building sectors and climates by 2030.

Research on Dongguan Mobile Phone Industry Development Status from the Patent Perspective

OpenAIRE

Qiu Yu

2017-01-01

[Purpose/significance] Through the analysis of the patent of five Dongguan mobile phone industries, this paper aims at providing information references for the development of Dongguan mobile phone industry. [Method/process] This paper first introduced the basic information of the mobile phone industry in our country, selected Dongguan mobile phone industry patents as the research object, and analyzed overall development trend--the general situation and the trend of applicants, inventors and I...

Geographical Research Model of the Relation Between Tourism and Industry on the Framework of Pula

Directory of Open Access Journals (Sweden)

Nikola Vojnović

2002-01-01

Full Text Available The research gives a proposal of a theoretical research model, and can be the basis of geographical research of the relation between tourism and industry as two opposite human activities and branches of economy. The accent is set on the consideration of their relation in major urban areas, which show a parallel development of tourism and industry of the Second Industrial Revolution, typical for Croatian coastline region. The proposal of the research scheme, from the analysis of the present structure and the quantity, harmony and disharmony of both branches, to the possibility of creating an industrial-tourism region are analyzed in the first part of the work, whereas the results of the initial research are presented in the second part.

75 FR 79024 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-ODVA, Inc.

Science.gov (United States)

2010-12-17

... Production Act of 1993--ODVA, Inc. Notice is hereby given that, on November 15, 2010, pursuant to Section 6(a) of the National Cooperative Research and Production Act of 1993, 15 U.S.C. 4301 et seq. (``the Act..., Ontario, Canada; Hokuyo Automatic Co., Ltd., Osaka, Japan; Omron Scientific Technologies, Inc. (formerly...

The Aeronautics Education, Research, and Industry Alliance (AERIAL) 2002 Report

Science.gov (United States)

Bowen, Brent D.; Fink, Mary M.; Nickerson, Jocelyn S.

2002-01-01

This report presents and overview of the Aeronautics Education, Research, and Industry Alliance (AERIAL). It covers the University of Nebraska's areas of research, and its outreach to students at Native American schools as part of AERIAL. The report contains three papers: "Airborne Remote Sensing (ARS) for Agricultural Research and Commercialization Application" (White Paper), "Validated Numerical Models for the Convective Extinction of Fuel Droplets (CEFD)", and "The Small Aircraft Transportation System (SATS): Research Collaborations with the NASA Langley Research Center".

"Do non-R&D intensive industries benefit of spillovers from public research? The case of the Agro-food industry

OpenAIRE

Vincent Mangematin; Nadine Mandran

2001-01-01

The agro-food industry is a sector in which the percentage of firms which have done innovation in the past three years is high, whereas they have a low research capacity. According to an innovation survey (1986-90) in France, 70% of agro-food firms which responded in the Community Innovation Survey (CIS), reported innovations while less than 5% of them had internal research capacities. Our paper models estimates of determinants of innovation in the agro-food industry. Based on the comparison ...

Experience Exchange Group (EEG) Approach as a Means for Research to be rooted in Industry

DEFF Research Database (Denmark)

Bruun, Peter

1997-01-01

of preliminary studies found interesting to set up an EEG composed of representatives from industry and a researcher. In the paper some general research methods pertinent to the area industrial management are discussed. The EEG concept is introduced and characterised in comparison with the other methods. EEG...... activities are described and a tentative coupling to the phases in a research process is proposed. Following this is a discussion of methodological and quality requirements. It is considered how EEG activities could possibly contribute to an industrial rooted research. The paper ends up looking at future......The intention of this paper is to clarify if and how an Experience Exchange Group(EEG) can be involved in a research process in the area of industrial management. For exemplification of the topic an ongoing research in global manufacturing is referred to. In this research it was after a series...

Dietary intake estimations of polybrominated diphenyl ethers (PBDEs) based on a total diet study in Osaka, Japan.

Science.gov (United States)

Akutsu, K; Takatori, S; Nakazawa, H; Hayakawa, K; Izumi, S; Makino, T

2008-01-01

This study presents the results of a total diet study performed for estimating the dietary intake of polybrominated diphenyl ethers (PBDEs) in Osaka, Japan. The concentrations of 36 PBDEs were measured in samples from 14 food groups (Groups I-XIV). PBDEs were detected only in Groups IV (oils and fats), V (legumes and their products), X (fish, shellfish, and their products), and XI (meat and eggs) at concentrations of 1.8, 0.03, 0.48, and 0.01 ng g⁻¹, respectively. For an average person, the lower bound dietary intakes of penta- and deca-formulations were estimated to be 46 and 21 ng day⁻¹, respectively. A high proportion of the decabrominated congener (DeBDE-209) was observed in Group IV. To confirm the presence of DeBDE-209 in vegetable oils, an additional analysis was performed using 18 vegetable oil samples. Of these, seven contained ng g⁻¹ levels of DeBDE-209.

Annual report of Research Center for Nuclear Physics, Osaka University. 1982 ed.

International Nuclear Information System (INIS)

Itahashi, T.; Morinobu, S.; Sakai, H.

1983-01-01

The major activity at RCNP in the fiscal year 1982 is the nuclear physics research based on use of the AVF cyclotron. Other fields of research include a study for the new accelerator project, developments of the existing facilities and applied researches. The cyclotron and the experimental facilities have operated satisfactorily in the fiscal year 1982. A total of about five thousand hours of machine time was allocated to about fifty experiments and various machine developments approved by the research program committee. The main subjects of the nuclear research carried out in the fiscal year 1982 are as follows: (1) Few nucleon problems. (2) Scattering of polarized protons and deuterons and optical model analyses. (3) Study of elastic and inelastic scatterings of protons, deuterons and alpha particles related to nuclear deformations. (4) Radiative capture reactions of polarized protons. (5) Breakup of deuterons, 3 He and heavy ions. (6) Ml states investigated by proton inelastic scattering. (7) Giant multipole resonances. (8) Highly excited states. (9) Direct, preequilibrium and equilibrium deexcitation processes. (10) Heavy ion reactions. (11) Beta decay. The recently developed technique of an acceleration of horizontally polarized beam is progressing. It has been successfully applied to the measurements of A sub(XZ) in d vector-p and d vector-nucleus scatterings. Accelerations of heavy ions, such as 6 Li 3+ and 7 Li 3+ are also successful using solid elements as source materials. Great progress is made this year in the construction of the two big experimental facilities which are an important addition to the laboratory facilities. The spin-transfer spectrograph named DUMAS is almost completed. Focussing properties and counter systems of the spectrograph is being tested successfully using the proton beam from the cyclotron

Research activities of Samsung Heavy Industries in the conservation of the environment

International Nuclear Information System (INIS)

Han, B.; Kim, D.K.; Pikaev, A.K.

1998-01-01

Research activities for accelerator fields at Samsung Heavy Industries could be categorized into the accelerator development and its industrial applications. As the initial step of the efforts, high voltage industrial electron accelerators are developed, and development of synchrotron light source and other accelerators are also investigated. The research activities for the applications of accelerator include wastewater treatment, combustion flue gas purification, semiconductor treatment, and other radio-chemical processing. For wastewater treatment, an electron beam pilot plant for treating 1,000m 3 /day of wastewater from 60,000m 3 /day of total dyeing wastewater is under construction in Taegu Dyeing Industrial Complex. A commercial plant for re-circulation of wastewater from papermill company is also under construction in S-paper Co. in Cheongwon city, and after the successful installation, up to 80% of wastewater could be re-used in paper producing process

Supplementing Resident Research Funding Through a Partnership With Local Industry.

Science.gov (United States)

Skube, Steven J; Arsoniadis, Elliot G; Jahansouz, Cyrus; Novitsky, Sherri; Chipman, Jeffrey G

2018-01-17

To develop a model for the supplementation of resident research funding through a resident-hosted clinical immersion with local industry. Designated research residents hosted multiple groups of engineers and business professionals from local industry in general surgery-focused clinical immersion weeks. The participants in these week-long programs are educated about general surgery and brought to the operating room to observe a variety of surgeries. This study was performed at the University of Minnesota, in Minneapolis, Minnesota, at a tertiary medical center. Ten designated research residents hosted general surgery immersion programs. Fifty-seven engineers and business professionals from 5 different local biomedical firms have participated in this program. General surgery research residents (in collaboration with the University of Minnesota's Institute for Engineering in Medicine) have hosted 9 clinical immersion programs since starting the collaborative in 2015. Immersion participant response to the experiences was very positive. Two full-time resident research positions can be funded annually through participation in this program. With decreasing funding available for surgical research, particularly resident research, innovative ways to fund resident research are needed. The general surgery clinical immersion program at the University of Minnesota has proven its value as a supplement for resident research funding and may be a sustainable model for the future. Copyright © 2018 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Assessment of industry needs for oil shale research and development. Final report

Energy Technology Data Exchange (ETDEWEB)

Hackworth, J.H.

1987-05-01

Thirty-one industry people were contacted to provide input on oil shale in three subject areas. The first area of discussion dealt with industry`s view of the shape of the future oil shale industry; the technology, the costs, the participants, the resources used, etc. It assessed the types and scale of the technologies that will form the industry, and how the US resource will be used. The second subject examined oil shale R&D needs and priorities and potential new areas of research. The third area of discussion sought industry comments on what they felt should be the role of the DOE (and in a larger sense the US government) in fostering activities that will lead to a future commercial US oil shale shale industry.

Utility of radiotracer methodology in scientific research of industrial relevancy

International Nuclear Information System (INIS)

Kolar, Z.I.

1990-01-01

Utilization of radiotracer methodology in industrial research provides substantial scientific rather than directly demonstrable economic benefits. These benefits include better understanding of industrial processes and subsequently the development of new ones. Examples are given of the use of radiotracers in technological studies and the significance of the obtained results is put down. Creative application of radiotracer methodology may contribute to the economic development and technological advancement of all countries including the developing ones. (orig.) [de

Dominant incidence of multidrug and extensively drug-resistant specific Mycobacterium tuberculosis clones in Osaka Prefecture, Japan.

Directory of Open Access Journals (Sweden)

Aki Tamaru

Full Text Available Infection and transmission of multidrug-resistant Mycobacterium tuberculosis (MDR-Mtb and extensively drug-resistant M. tuberculosis (XDR-Mtb is a serious health problem. We analyzed a total of 1,110 Mtb isolates in Osaka Prefecture and neighboring areas from April 2000 to March 2009. A total of 89 MDR-Mtb were identified, 36 (48.5% of which were determined to be XDR-Mtb. Among the 89 MDR-Mtb isolates, 24 (27.0% phylogenetically distributed into six clusters based on mycobacterial interspersed repetitive units-various number of tandem repeats (MIRU-VNTR typing. Among these six clusters, the MIRU-VNTR patterns of four (OM-V02, OM-V03, OM-V04, and OM-V06 were only found for MDR-Mtb. Further analysis revealed that all isolates belonging to OM-V02 and OM-V03, and two isolates from OM-V04 were clonal. Importantly such genotypes were not observed for drug-sensitive isolates. These suggest that few but transmissible clones can transmit after acquiring multidrug resistance and colonize even in a country with a developed, well-organized healthcare system.

Achievement report for 1st phase (fiscal 1974-80) Sunshine Program research and development - Hydrogen energy. Research on hydrogen production technology using thermochemical process (Research on cycles of Fe systems etc.); 1974-1980 nendo suiso energy seika hokokusho. Netsu kagakuho ni yoru suiso seizo gijutsu no kenkyu (tetsukei cycle nado no kenkyu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1981-03-01

Collected in this report are the results of efforts of the Government Industrial Research Institute, Osaka, in the 7-year period that began in fiscal 1974. The Institute, after looking for basic reactions in thermochemical cycles which are promising, has come to propose a new cycle in which iron and bromine are the reactants. In the research, the Fe-Br reaction is divided into a hydrogen generating loop and an oxygen generating loop, both to be developed into devices. Problems in developing them into a cycle are isolated, and solved. In the hydrogen generating loop, the use of a molten salt is contrived for the prevention of reduction in the reactivity of the Fe{sub 3}O{sub 4} to be generated, and now it is expected that the problem will be solved. No problem is detected in the oxygen generating loop. The process is now accepted as a superb one. As for the materials for the Fe-Br-based cycle apparatus, important tasks have to be undertaken since existing materials cannot be used as is. Besides, thermal efficiency etc. are estimated for a new As-Br-based hybrid cycle and the Fe-Br-based cycle. (NEDO)

PREFACE: Nanospintronics design and realization

Science.gov (United States)

Akai, Hisazumi; Katayama-Yoshida, Hiroshi; Kasai, Hideaki

2004-12-01

This special issue of Journal of Physics: Condensed Matter contains selected papers from the 1st International Conference on Nanospintronics Design and Realization (ICNDR 2004), which was held in Kyoto, Japan, 24--28 May 2004. This conference was organized by the Nanospintronics Design and Realization project members: Hideaki Kasai, Osaka (Chair of the Conference) Hisazumi Akai, Osaka Hajime Asahi, Osaka Wilson Agerico Diño, Osaka Hiroshi Harima, Kyoto Tomoyuki Kakeshita, Osaka Junjiro Kanamori, Kyoto Hiroshi Katayama-Yoshida, Osaka Koichi Kusakabe, Osaka Hiroshi Nakanishi, Osaka (Secretary) Tamio Oguchi, Hiroshima Teruo Ono, Osaka Naoshi Suzuki, Osaka Hitoshi Tabata, Osaka under the auspices of the Japan Ministry of Education, Culture, Sports, Science and Technology (MEXT) Special Coordination Funds for Promoting Science and Technology, and the sponsorship of Osaka University and the International Institute for Advanced Studies (IIAS). The conference is intended to provide an international forum for experimental and theoretical researchers, in the rapidly developing field of nanospintronics. It aims to: provide an overview of our current understanding of the physics of spin transport in (magnetic) semiconductors and hybrid magnetic/semiconductor structures; provide a venue to present and discuss the latest developments in using spin-dependent phenomena in nano-(opto-) electronics and computing applications; provide a venue for discussion and assessment of other possible means of exploiting the spin-dependent phenomena in future nano-(opto-) electronic and computing applications; address current (and foreseeable future) problems, of fundamental and applied nature, in an effort to bridge the physics and technology gap between semiconducting and magnetic materials. All of these being geared towards bringing about the realization of a functioning nanospintronics. A total of 127 delegates from 15 countries took part in ICNDR 2004, which was comprised of 62 invited

Scenario research: The food industry in 2010

OpenAIRE

Stacey, Julia; Sonne, Anne-Mette; Jensen, Birger Boutrup

2001-01-01

What kind of foods will the consumers choose to buy in 2010? Will they be buying organic foods, functional foods or go for the cheapest products? Nobody can predict the future. However, by using scenario techniques qualified indications on future developments can be put together. Researchers at MAPP and the Department of Manufacturing Engineering and Management, The Technical University of Denmark have constructed three scenarios about the Danish food industry in 2010. The aim has been to ide...

Is performance related to marketing research in the health care industry?

Science.gov (United States)

Naidu, G M; Kleimenhagen, A; Pillari, G D

1994-01-01

Marketing research has grown to become indispensable for superior performance in packaged goods industries. While health care institutions are spending large amounts on marketing research, few studies focus upon the relationship of marketing research to health care organizational performance. Utilizing a national sample of U.S. hospitals, this article points out that marketing research and superior performance are positively associated.

Responsible Research and Innovation in industry-challenges, insights and perspectives

DEFF Research Database (Denmark)

Martinuzzi, André; Blok, Vincent; Brem, Alexander

2018-01-01

empirical and conceptual contributions that explore corporate motivations to adopt RRI, the state of implementation of concrete RRI practices, the role of stakeholders in responsible innovation processes, as well as drivers and barriers to the further diffusion of RRI in industry. Overall......The responsibility of industry towards society and the environment is a much discussed topic, both in academia and in business. Responsible Research and Innovation (RRI) has recently emerged as a new concept with the potential to advance this discourse in light of two major challenges industry...... is facing today. The first relates to the accelerating race to innovate in order to stay competitive in a rapidly changing world. The second concerns the need to maintain public trust in industry through innovations that generate social value in addition to economic returns. This Special Issue provides...

Student involvement and research for the nuclear industry

International Nuclear Information System (INIS)

Ginniff, M.E.

1980-01-01

Nuclear engineering is one of the modern and rapidly advancing technologies. Those already involved in it are continually updating their knowledge to keep abreast of the developments. Of course the sound basic principles of engineering still apply but the scene of application can be transformed in a few years. In fact, because of this, many engineers from more traditional industries often express the view that presently the total range of nuclear engineering is research and development. How can students be trained for such a rapidly advancing technology. Is not the answer early involvement. Effective early involvement for students can only come about by the close co-operation and involvement of the staff of universities and industry. The theme is developed. (author)

Nosocomial Serratia marcescens outbreak in Osaka, Japan, from 1999 to 2000.

Science.gov (United States)

Takahashi, Hiroshi; Kramer, Michael H; Yasui, Yoshinori; Fujii, Hayato; Nakase, Katsumi; Ikeda, Kazunori; Imai, Tatsuya; Okazawa, Akiko; Tanaka, Tomoyuki; Ohyama, Takaaki; Okabe, Nobuhiko

2004-02-01

To investigate and control an outbreak of bloodstream infections (BSIs) caused by Serratia marcescens and to identify risk factors for respiratory colonization or infection with S. marcescens. Epidemiologic investigation, including review of medical and laboratory records, procedural investigations, pulsed-field gel electrophoresis (PFGE) typing of environmental and patient isolates, statistical study, and recommendation of control measures. All patients admitted to a 380-bed, secondary-care hospital in Osaka Prefecture, Japan, from July 1999 through June 2000 (study period). Seventy-one patients were colonized or infected with S. marcescens; 3 patients who developed primary BSIs on the same ward within 5 days in June 2000 had isolates with indistinguishable PFGE patterns and indwelling intravenous catheters for more than 5 days. On multivariate analysis, among 36 case-patients with positive sputum specimens and 95 control-patients, being bedridden (odds ratio [OR], 15.91; 95% confidence interval [CI95], 4.17-60.77), receiving mechanical ventilation (OR, 7.86; CI95, 2.27-27.16), being older than 80 years (OR, 3.12; CI95, 1.05-9.27), and receiving oral cleaning care (OR, 3.10; CI95, 1-9.58) were significant risk factors. S. marcescens was isolated from the fluid tanks of three nebulizers and a liquid soap dispenser. The hospital did not have written infection control standards, and many infection control practices were found to be inadequate (eg, respiratory equipment was used without disinfection between patients). Poor hospital hygiene and the lack of standard infection control measures contributed to infections hospital-wide. Recommendations to the hospital included adoption of written infection control policies.

Synergy between research activity and management procedures in an industrial waste treatment

International Nuclear Information System (INIS)

Bertanza, G.; Collivignarelli, M.C.; Zanaboni, S.

2006-01-01

The optimization of operation criteria for centralized industrial waste treatment plants is a difficult task. Experimental research can be a useful tool for understanding how to carry out this optimization process; however, in order to obtain proper solution, a very close connection must been observed activity and the field (e.g. practical application at the full scale). In this paper a three years successful experience is described: the research was carried out in an industrial waste treatment facility located in Northern Italy. Thanks to a close interaction between management and research activities, a significant synergy was achieved: in fact, interesting and original suggestions for the research arose from plant monitoring, and the first findings of the research have already led to important improvements in the full scale plant management [it

Non clinical research at CENTIS supporting biotechnological and pharmaceutical industry

International Nuclear Information System (INIS)

Hernandez Gonzalez, Ignacio

2012-01-01

Drugs production is a highly demanding industry because the rigor of legislations and guidelines. Standards are applied to manufacturing facilities and also to research and development stage. Our national biotechnological industry is developing and producing important medications for diseases like cancer, some of them in the national and international market. Isotopes Centre is an institution supporting such development by means of a work platform to carry out researches in the field of pharmacokinetic and biodistribution in experimental models. Accumulated experience allows us to contribute to research and development of different kind of molecules as pharmaceuticals, specially the biotechnological ones. We are evolving in direction to new technologies and methodologies more suitable to current standards. Radiolabeling is still a convenient choice considering present and new imaging technologies to investigate distribution and kinetic in living subjects. With the techniques we have and the ones to incorporate in a near future, new and more demanding investigations will be affordable. (author)

Multi-Disciplinary Research Experiences Integrated with Industry –Field Experiences

Directory of Open Access Journals (Sweden)

Suzanne Lunsford

2015-10-01

Full Text Available The purpose of this environmentally inquiry-based lab was to allow the students to engage into real-world concepts that integrate industry setting (Ohio Aggregate Industrial Mineral Association with the academia setting. Our students are engaged into a field trip where mining occurs to start the problem based learning of how the heavy metals leak in the mining process. These heavy metals such as lead and indium in the groundwater are a serious concern for the environment (Environmental Protection Agency from the mining process. The field experiences at the mining process assist in building our students interest in developing sensors to detect heavy metals of concern such as lead and indium simultaneously by a unique electrochemistry technique called Square Wave Anodic Stripping Voltammetry (SWASV. The field experience assists building the students interest in real –world application and what qualities do they want the electrochemical sensor to possess to be successful for real world usage. During the field trip the students are engaged into learning novel instrumentation such as an SEM (Scanning Electron Microscope to study the working electrode sensor developed to understand the sensor surface morphology properties better as well. The integration of industry setting with academia has been a positive experience for our students that has allowed their understanding of real-world science research needs to succeed in an industrial setting of research.

Impacts of teachers’ competency on job performance in research universities with industry characteristics: Taking academic atmosphere as moderator

Directory of Open Access Journals (Sweden)

Anguo Xu

2014-10-01

Full Text Available Purpose: Research universities with industry characteristics play an irreplaceable role in national economic development and social development. With the rapid development of research universities with industry characteristics in China, these universities face new challenges in managing teachers and promoting their quality. This paper aims to examine the impact of teachers’ competency on job performance in research university with industry characteristics Design/methodology/approach: Based on the behavioral event interview and questionnaire methods, a four-dimension (i.e. basic quality, teaching ability, industry awareness and research capacity competency model was proposed, the influence mechanism of competency on job performance was examined using empirical research. Findings: We found that there is a significant positive correlation between the teachers’ competency level, four dimensions and job performance in research universities with industry characteristics, especially between research capacity, teaching ability, industry awareness and job performance. And academic atmosphere plays a regulatory role in the interaction between the competency and job performance. Practical implications: Our findings can help to improve the management level of teachers in research universities with industry characteristics.Originality/value: The paper introduces the competency theory to the teacher management in research universities with industry characteristics, and gives some interesting findings.

[Health-related scientific and technological capabilities and university-industry research collaboration].

Science.gov (United States)

Britto, Jorge; Vargas, Marco Antônio; Gadelha, Carlos Augusto Grabois; Costa, Laís Silveira

2012-12-01

To examine recent developments in health-related scientific capabilities, the impact of lines of incentives on reducing regional scientific imbalances, and university-industry research collaboration in Brazil. Data were obtained from the Conselho Nacional de Desenvolvimento Científico e Tecnológico (Brazilian National Council for Scientific and Technological Development) databases for the years 2000 to 2010. There were assessed indicators of resource mobilization, research network structuring, and knowledge transfer between science and industry initiatives. Based on the regional distribution map of health-related scientific and technological capabilities there were identified patterns of scientific capabilities and science-industry collaboration. There was relative spatial deconcentration of health research groups and more than 6% of them worked in six areas of knowledge areas: medicine, collective health, dentistry, veterinary medicine, ecology and physical education. Lines of incentives that were adopted from 2000 to 2009 contributed to reducing regional scientific imbalances and improving preexisting capabilities or, alternatively, encouraging spatial decentralization of these capabilities. Health-related scientific and technological capabilities remain highly spatially concentrated in Brazil and incentive policies have contributed to reduce to some extent these imbalances.

Past, Present, and Future Business-to-Business and Industrial Marketing Research

DEFF Research Database (Denmark)

Lindgreen, Adam; Di Benedetto, C. Anthony; Geersbro, Jens

2018-01-01

This editorial summarizes both the development and impact of Peter LaPlaca, in terms of his work with and for the industrial and marketing purchasing research community, using several different perspectives. It also offers an overview of what (former) editors of other business-to-business marketing...... management journals think of Peter LaPlaca. Following that, this editorial briefly reviews dominant topics in Industrial Marketing Management....

Defense, basic, and industrial research at the Los Alamos Neutron Science Center: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Longshore, A.; Salgado, K. [comps.

1995-10-01

The Workshop on Defense, Basic, and Industrial Research at the Los Alamos Neutron Science Center gathered scientists from Department of Energy national laboratories, other federal institutions, universities, and industry to discuss the use of neutrons in science-based stockpile stewardship, The workshop began with presentations by government officials, senior representatives from the three weapons laboratories, and scientific opinion leaders. Workshop participants then met in breakout sessions on the following topics: materials science and engineering; polymers, complex fluids, and biomaterials; fundamental neutron physics; applied nuclear physics; condensed matter physics and chemistry; and nuclear weapons research. They concluded that neutrons can play an essential role in science-based stockpile stewardship and that there is overlap and synergy between defense and other uses of neutrons in basic, applied, and industrial research from which defense and civilian research can benefit. This proceedings is a collection of talks and papers from the plenary, technical, and breakout session presentations. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

[Brief Report on the 69th Annual Meeting of the Japanese Cancer Association - Conquering Cancer with Collective Wisdom].

Science.gov (United States)

Tsukagoshi, Shigeru

2010-11-01

The 69th Annual Meeting was held from September 22nd through 24th, at Osaka International Convention Center and RIHGA ROYAL HOTEL Osaka. The president of this meeting was professor Morito Monden, Osaka University Medical School. In this meeting, there were many scientific meetings including Special Remarks, symposiums, workshops, international sessions, oral and poster sessions and others, English workshops, morning lectures. Especially, as a special session, Now, what are the elements expected to cancer research ? - Special proposals for cancer research, was one of the most impressive session among many.

The rise and fall of rabies in Japan: A quantitative history of rabies epidemics in Osaka Prefecture, 1914-1933.

Directory of Open Access Journals (Sweden)

Aiko Kurosawa

2017-03-01

Full Text Available Japan has been free from rabies since the 1950s. However, during the early 1900s several large-scale epidemics spread throughout the country. Here we investigate the dynamics of these epidemics between 1914 and 1933 in Osaka Prefecture, using archival data including newspapers. The association between dog rabies cases and human population density was investigated using Mixed-effects models and epidemiological parameters such as the basic reproduction number (R0, the incubation and infectious period and the serial interval were estimated. A total of 4,632 animal rabies cases were reported, mainly in dogs (99.0%, 4,584 cases during two epidemics from 1914 to 1921, and 1922 to 1933 respectively. The second epidemic was larger (3,705 cases than the first (879 cases, but had a lower R0 (1.50 versus 2.42. The first epidemic was controlled through capture of stray dogs and tethering of pet dogs. Dog mass vaccination began in 1923, with campaigns to capture stray dogs. Rabies in Osaka Prefecture was finally eliminated in 1933. A total of 3,805 rabid dog-bite injuries, and 75 human deaths were reported. The relatively low incidence of human rabies, high ratio of post-exposure vaccines (PEP and bite injuries by rabid dogs (minimum 6.2 to maximum 73.6, between 1924 and 1928, and a decline in the proportion of bite victims that developed hydrophobia over time (slope = -0.29, se = 3, p < 0.001, indicated that increased awareness and use of PEP might have prevented disease. Although significantly more dog rabies cases were detected at higher human population densities (slope = 0.66, se = 0.03, p < 0.01, there were fewer dog rabies cases detected per capita (slope = -0.34, se = 0.03, p < 0.01. We suggest that the combination of mass vaccination and restriction of dog movement enabled by strong legislation was key to eliminate rabies. Moreover, the prominent role of the media in both reporting rabies cases and efforts to control the disease likely contributed

Research on the development for emerging industries in Nantong under the national strategy

Science.gov (United States)

Li, Zhongnian; Qin, Yan; Zhang, Lijuan; Li, Tianying; Wang, Qing

2017-08-01

In this paper, according to the relevant national strategic emerging industry planning and policy, conducted in-depth research on the development of emerging industries in Nantong, and believes that current economic social development in Nantong has been entered into a new normal period, in the new period to “innovation” as the core characteristics, strategic emerging industry opportunities and challenges facing the industry. Therefore, Nantong should persist in innovation driven, focus on the cultivation and development of new industries, to provide new impetus to Nantong’s economic vitality and development. According to the development and upgrading of traditional industries, and expand the advantages of industry, cultivate new industries, for each kind of industry to come up with specific development strategies and suggestions: Nantong municipal government will be the seven emerging industries four in the industry (i.e., new material industry, new energy industry, new information technology industry, high-end equipment manufacturing industry) as the development object, further “bigger and stronger”, and strive to enhance the industrial scale and the formation of local characteristics as soon as possible.

Sensitivity of surface resistance measurement of HTS thin films by ...

Indian Academy of Sciences (India)

2Research Center for Superconductor Photonics, Osaka University, Osaka 565 0871, Japan ... rical constants of the resonator obtained from the mathematical model ... from the knowledge of the electromagnetic field distribution in a resonator.

West African Journal of Industrial and Academic Research - Vol 4 ...

African Journals Online (AJOL)

West African Journal of Industrial and Academic Research - Vol 4, No 1 (2012) ... Open Access DOWNLOAD FULL TEXT Subscription or Fee Access ... on Gas Turbine Engine Data · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

RESEARCH ON INVESTMENT APPEAL AND COMPETITIVE CAPACITY OF INDUSTRIAL ENTERPRISES OF UKRAINE

Directory of Open Access Journals (Sweden)

Olena Khadzhynova

2017-12-01

Full Text Available The purpose of the research is an elaboration of theoretical, methodological, and methodical approaches to forming and developing competitive capacity and investment appeal of steel industry enterprises. The achievement of the given purpose has led to the necessity of formulating such scientific research concept, which bottom line is in the relevance of using modern management methods implemented in foreign manufacturing practices. These are innovative economic, technical, organizational, and corporate methods of managing enterprises with the help of developed systems of managing strategic changes in enterprise activities, the steel industry in particular, which will contribute to achieving the high level of effectiveness and competitiveness of domestic business units. The research methodology is based on the combination of theories of managing economic systems in the globalized market economy. The empirical base for the research consists of the works by domestic and foreign scientists on problems of formation and development of strategic change management systems at industrial enterprises, statistical records, companies’ public records in the Internet, data of international information agencies, Ukrainian legislation on regulating economic activity of enterprises. In carrying out the research, such methods were used as: general academic analysis and synthesis, systemic generalization, statistic and correlation analysis (when justifying the directions of development before carrying out the economic analysis of activities of metallurgical enterprises. There is a conclusion that the industry is concentrated and, consequently, long-term trends are quite predictable, but they require additional clarifications, taking into consideration the uncertainty in the modern state of world economy. It is determined that metallurgy development depends on GBP. The analysis shows that the countries with the high GDP level have quite developed metallurgy. One

West African Journal of Industrial and Academic Research - Vol 17 ...

African Journals Online (AJOL)

West African Journal of Industrial and Academic Research - Vol 17, No 1 (2017) ... Open Access DOWNLOAD FULL TEXT Subscription or Fee Access ... The effect of electricity and gas losses on Nigeria`s Gross Domestic Product · EMAIL ...

Aeronautics Education, Research, and Industry Alliance (AERIAL) Year 2 Report and Year 3 Proposal

Science.gov (United States)

Bowen, Brent D.; Box, Richard C.; Fink, Mary M.; Gogos, Geroge; Lehrer, Henry R.; Narayanan, Ram M.; Nickerson, Jocelyn S.; Tarry, Scott E.; Vlasek, Karisa D.

2003-01-01

The Aeronautics Education, Research, and Industry Alliance (AERIAL): a comprehensive, multi-faceted NASA EPSCoR 2000 initiative, contributes to the strategic research and technology priorities of NASA while intensifying Nebraska s rapidly growing aeronautics research and development endeavors. AERIAL enables Nebraska researchers to: (a) continue strengthening their collaborative relationships with NASA Field Centers, Codes, and Enterprises; (b) increase the capacity of higher education throughout Nebraska to invigorate and expand aeronautics research; and (c) expedite the development of aeronautics-related research infrastructure and industry in the state. This report contains a summary of AERIAL's activities and accomplishments during the second year of implementation. The AERIAL Year 3 proposal is also included.

Energy research in the mechanical forest industry 1980-1982. Summary

Energy Technology Data Exchange (ETDEWEB)

Usenius, A.

1982-12-01

The energy research project of the mechanical forest industry studied the energy consumption in 1979 and the possibilities to save energy in the sawmill, plywood, particleboard, fibreboard, joinery, wooden houses, gluelam and impregnation industries. The energy consumption per product unit is on the minimum level in sawmilling, 1.38 GJ/m/sup 3/, and on the maximum level in fibreboard manufacturing, 9.98 GJ/t. In plywood production, 6.95 GJ/m/sup 3/, the energy consumption is about double compared with the consumption in particleboard production, 3.40 GJ/m/sup 3/. The main part of the energy is heat. In the drying process about 70-85% of the total energy is used in individual processes. Over a half, 53.9%, of the total energy consumption, 23 169 TJ, is used in sawmill industry. The proportion of plywood industry is 19.2%, of particleboard industry 12.2% and of fibreboard industry 7.2%. The proportion of the processing industry is 7.5%; the main part is used in joinery industry. The fuel consumption in transportation of wooden raw materials was 2 260 TJ and in transportation of products 4 800 TJ. In fibreboard industry it is possible to save energy by leading the waste steam from defibratory into chip silos for preheating of the chips. In veneer and chip drying it is possible to save energy by using higher moisture content of the drying air and by utilizing the drying capacity as well as possible. In kiln drying of timber the changing of drying circumstances can in some cases save 50-150 FIM per 1 cbm of dried timber.

Science for Energy Technology: Strengthening the Link Between Basic Research and Industry

Energy Technology Data Exchange (ETDEWEB)

None

2010-04-01

The nation faces two severe challenges that will determine our prosperity for decades to come: assuring clean, secure, and sustainable energy to power our world, and establishing a new foundation for enduring economic and jobs growth. These challenges are linked: the global demand for clean sustainable energy is an unprecedented economic opportunity for creating jobs and exporting energy technology to the developing and developed world. But achieving the tremendous potential of clean energy technology is not easy. In contrast to traditional fossil fuel-based technologies, clean energy technologies are in their infancy, operating far below their potential, with many scientific and technological challenges to overcome. Industry is ultimately the agent for commercializing clean energy technology and for reestablishing the foundation for our economic and jobs growth. For industry to succeed in these challenges, it must overcome many roadblocks and continuously innovate new generations of renewable, sustainable, and low-carbon energy technologies such as solar energy, carbon sequestration, nuclear energy, electricity delivery and efficiency, solid state lighting, batteries and biofuels. The roadblocks to higher performing clean energy technology are not just challenges of engineering design but are also limited by scientific understanding.Innovation relies on contributions from basic research to bridge major gaps in our understanding of the phenomena that limit efficiency, performance, or lifetime of the materials or chemistries of these sustainable energy technologies. Thus, efforts aimed at understanding the scientific issues behind performance limitations can have a real and immediate impact on cost, reliability, and performance of technology, and ultimately a transformative impact on our economy. With its broad research base and unique scientific user facilities, the DOE Office of Basic Energy Sciences (BES) is ideally positioned to address these needs. BES has laid

Size and Distribution of Research Benefits in the Australian Dairy Industry

OpenAIRE

Liu, Esther; Tarrant, Katherine A.; Ho, Christie K.M.; Malcolm, Bill; Griffith, Garry R.

2012-01-01

An equilibrium displacement model of the Australian dairy industry is being developed for estimating the net benefits from dairy research undertaken by DPI Victoria. In this initial version, the dairy industry is represented by a system of aggregate demand and supply relationships for two input sectors, raw milk and milk processing inputs, and three output sectors, export and domestic manufactured milk and domestic fluid milk. Quantities and prices are calibrated in terms of milk equivalents....

Undergraduates' Perceptions of Conflict of Interest in Industry-Sponsored Research

Science.gov (United States)

Perry, Heather Brodie

2018-01-01

The prevalence of industry-sponsored research has led to significant concerns about financial conflicts of interest and the impact on research findings. This case study sought to examine how students considered conflict of interest when establishing the cognitive authority of a journal article. The case study used a mixed methods pretest and…

On recent progress using QCLs for molecular trace gas detection - from basic research to industrial applicaitons

NARCIS (Netherlands)

Röpcke, J.; Davies, P.; Hempel, F.; Hübner, M.; Glitsch, S.; Lang, N.; Nägele, M.; Rousseau, A.; Wege, S.; Welzel, S.

2010-01-01

Quantum Cascade Lasers offer attractive options for applications of MIR absorption spectroscopy for basic research and industrial process control. The contribution reviews applications for plasma diagnostics and trace gas monitoring in research and industry.

An overview of industrial and organisational psychology research in South Africa: A preliminary study

Directory of Open Access Journals (Sweden)

Dries Schreuder

2010-10-01

Research purpose: The purpose of this study was to explore general research trends in the field of industrial and organisational psychology in South Africa from 1950 to 2008. Motivation for study: Research in the field tends to be influenced by either the changing needs of business or the occupational or personal fields of interest of academics, which often lead to an overemphasis on specific subdisciplines at the expense of others. This research aims to critically review dominant trends in the research focus areas in the field, in the light of present challenges in the changing work context. Recommendations are also made for possible future research. Research design, approach and method: A broad systematic review was carried out to analyse documented published and accredited South African research in the field (n = 2501. Main findings: Although there has been a proportional decline in personnel psychology research since 1990, there has been a proportional increase in both organisational psychology and employee wellness research since 1980 and 1990, respectively. Some areas of the industrial and organisational psychology field appear to be consistently under-researched. Practical implications: The insights derived from the findings can be used by academia and researchers in the field to plan future research initiatives. Contribution/value-add: The findings provide preliminary insights that contribute to the body of knowledge concerned with the industrial and organisational psychology field in the South African context.

Effect of highly reflective roofing sheet on building thermal loads for a school in Osaka

Directory of Open Access Journals (Sweden)

Yuan Jihui

2017-01-01

Full Text Available Currently, urban heat island (UHI phenomenon and building energy consumptions are becoming serious. Strategies to mitigate UHI and reduce building energy consumptions are implemented worldwide. In Japan, as an effective means of mitigating UHI and saving energy of buildings, highly reflective (HR and green roofs are increasingly used. In order to evaluate the effect of roofs with high reflection and thermal insulation on the energy conservation of buildings, we investigated the roof solar reflectivity of the subject school in Osaka, in which the HR roofing sheet was installed on the roof from 2010. Thermal loads, including cooling and heating loads of the top floor of school, were calculated using the thermal load calculation software, New HASP/ACLD-β. Comparing the thermal loads after HR roofing sheet installation to previous, the annual thermal load decreased about 25 MJ/m2-year and the cooling load decreased about 112 MJ/m2-year. However, the heating load increased about 87 MJ/m2-year in winter. To minimize the annual thermal load, thermal insulation of the roof was also considered be used together with HR roofing sheet in this study. The results showed that the combination of HR roofing sheet and high thermal insulation is more effective to reduce the annual thermal load.

48 CFR 206.302-3 - Industrial mobilization; or engineering, development, or research capability.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Industrial mobilization; or engineering, development, or research capability. 206.302-3 Section 206.302-3 Federal Acquisition... COMPETITION REQUIREMENTS Other Than Full and Open Competition 206.302-3 Industrial mobilization; or...

Research of mountain rocks of Georgia for using in glass materials industry

International Nuclear Information System (INIS)

Gabunia, L.; Gabunia, N.; Jakhva, N.; Napetvaridze, Ts.; Alibegashvili, M.

2009-01-01

The article presents the results of the research of mountain rocks of Georgia in various peaces of basalts, andesite, andesite-basalt porphyry and trachite deposits in order to be used in the industry of fiber, glass-crystal materials and fasade decorative tiles. The prospects of basalt and andesite-basalt porphyry use in the industry of fiber materials in the form of monocomponents has been stated. The technology of obtaining of wear resistant, chemically stable and colored glass-crystal on the basis of andesit and trachyte, has been worked out and approved in industry. (author)

WAMAS: an event to develop synergies between research and industry

CERN Multimedia

Rosaria Marraffino

2013-01-01

On 19-20 November, CERN hosted the first Workshop on Advanced Materials and Surfaces (WAMAS) in the framework of EIROforum, a network of Europe’s largest inter-governmental research organisations.     “The intent of the workshop was to promote the importance of materials and surfaces technology in the research programmes of European organisations,” explains Enrico Chesta, CERN’s Technology Transfer Section Leader and chairman of the EIROforum Working Group on Innovation Management. “Events like WAMAS help support the involvement of industry with scientific institutions because they facilitate the translation of the available expertise into commercial applications.” The event was organised with the support of EuCARD-2 and Enterprise Europe Network (EEN) through the Rhône-Alpes Chamber of Commerce and Industry. “More than 160 participants came together at the workshop; there was a good balance between ind...

Review of Researches on Agricultural Industry Chain at Home and Abroad

Institute of Scientific and Technical Information of China (English)

Ge; SONG; Taiyan; YANG; Jianhui; LIU

2014-01-01

Management of agricultural industry chain is the main form of modern agricultural industrialization. Integration and optimization of agricultural chain have great significance in deepening the reform in the countryside,quickening the development of agricultural modernization and establishing new system of agricultural management. Based on the theory sources and contents of agricultural chain as well as the current researches at home and abroad,this paper hackles and concludes information technology,logistics management and food safety and quality in foreign agricultural chain as well as the organization model,operation mechanism,integration and optimization,promotion and extension,financing and risk prevention,influencing factors as well as performance evaluation in domestic agricultural chain and offers relevant review in order to provide further reference for future researches.

The Effects of University-Industry Relationships and Academic Research on Scientific Performance: Synergy or Substitution?

Science.gov (United States)

Manjarres-Henriquez, Liney; Gutierrez-Gracia, Antonio; Carrion-Garcia, Andres; Vega-Jurado, Jaider

2009-01-01

This paper evaluates whether university-industry relationships (UIR) and academic research activities have complementary effects on the scientific production of university lecturers. The analysis is based on a case study of two Spanish universities. We find that the effects of R&D contracts with industry, and academic research activity on…

The role of leadership in bridging the cultural divide within university-industry cooperative research centres

DEFF Research Database (Denmark)

Mahdad, Maral; Bogers, Marcel; Piccaluga, Andrea

The purpose of this study is to understand the role of leadership in bridging the cultural gap within university-industry cooperative research centres. Many different aspects of university-industry collaborations have been researched, but the role of leadership in such organizations has not been...... and employees representatives from both the company and the university within eight joint laboratories of Telecom Italia. We find that leadership theories help to shed light on the performance of university-industry collaboration. We specifically identify charismatic leadership at the individual level followed...... provide specific insights that advance the literature in management of university-industry collaborations as well as leadership theories....

Specific features of occupational medicine in nuclear research and industry

International Nuclear Information System (INIS)

Giraud, J.M.; Quesne, B.

2003-01-01

Measures to prevent the exposure of personnel to ionising radiation were taken as soon as the first nuclear laboratories were set up. This branch of occupational preventive medicine has since kept pace with advances in research and in the industrial applications of nuclear energy. (authors)

Research and Application of Autodesk Fusion360 in Industrial Design

Science.gov (United States)

Song, P. P.; Qi, Y. M.; Cai, D. C.

2018-05-01

In 2016, Fusion 360, a productintroduced byAutodesk and integrating industrial design, structural design, mechanical simulation, and CAM, turns out a design platform supportingcollaboration and sharing both cross-platform and via the cloud. In previous products, design and manufacturing use to be isolated. In the course of design, research and development, the communication between designers and engineers used to go on through different software products, tool commands, and even industry terms. Moreover, difficulty also lies with the communication between design thoughts and machining strategies. Naturally, a difficult product design and R & D process would trigger a noticeable gap between the design model and the actual product. A complete product development process tends to cover several major areas, such as industrial design, mechanical design, rendering and animation, computer aided emulation (CAE), and computer aided manufacturing (CAM). Fusion 360, a perfect design solving the technical problems of cross-platform data exchange, realizes the effective control of cross-regional collaboration and presents an overview of collaboration and breaks the barriers between art and manufacturing, andblocks between design and processing. The “Eco-development of Fusion360 Industrial Chain” is both a significant means to and an inevitable trend forthe manufacturers and industrial designers to carry out innovation in China.

Advancing Understanding on Industrial Relations in Multinational Companies: Key Research Challenges and the INTREPID Contribution

DEFF Research Database (Denmark)

Gunnigle, Patrick; Valeria, Pulignano; Edwards, Tony

2015-01-01

companies using INTREPID (Investigation of Transnationals’ Employment Practices: an International Database) data. Finally, the paper identifies some of the main industrial relations issues that remain to be addressed, in effect charting a form of research agenda for future work using the INTREPID data......This paper has three principal aims. It firstly provides some theoretical background on the key current research issues and challenges in regard to industrial relations in multinational companies. It then presents a concise review of scholarship to date on industrial relations in multinational...

Process industry properties in nuclear industry

International Nuclear Information System (INIS)

Zheng Hualing

2005-01-01

In this article the writer has described the definition of process industry, expounded the fact classifying nuclear industry as process industry, compared the differences between process industry and discrete industry, analysed process industry properties in nuclear industry and their important impact, and proposed enhancing research work on regularity of process industry in nuclear industry. (authors)

AN EXPLORATORY RESEARCH REGARDING CUSTOMER ORIENTATION AND PERFORMANCE IN HOSPITALITY INDUSTRY

Directory of Open Access Journals (Sweden)

FLAVIA DANA OLTEAN

2013-08-01

Full Text Available The main objective of this research is to present the importance of the customer orientation from themanagerial perspective and to analyze the influence of customer orientation over the performance indicators in thehotels from Mures county (Romania . For achieving this objective, the data have been collected by means of 42surveys addressed to managers and owners who are active in the industry of hospitability, and the results indicated apartial confirmation of the tested hypotheses and the results from previous international research. The conclusions ofthe study present importance for the decisional authorities associated with hotel units which desire to achieve thesatisfaction of the customers, gaining the brand loyalty and implicitly the desired economic efficiency and add to theinternational literature aspects referring to the industry of hospitality from Romania.

The Research Paper as an Object of Communication in Industrial Design Educations

DEFF Research Database (Denmark)

Thomsen, Bente Dahl; Botin, Lars

2014-01-01

The preparation of papers provides students at industrial design education´s an opportunity to gain experience with design research and papers as an object of communication. Design research is an interdisciplinary field that is both relatively new and with a blurred borderline to the professional...

Measuring macro-level effects of the global economic recession on university-industry research cooperation

Energy Technology Data Exchange (ETDEWEB)

Azagra-Caro, J.M.; Tijssen, R.J.W.; Yegros-Yegros, A.

2016-07-01

The 2007/2008 financial crisis, and ensuing economic recession, had a direct negative effect on university-industry research cooperation in the OECD countries and other economies – it diminished the number of university-industry co-authored research publications (UICs) during the period 2008-13 by 7%. It also changed the relationship between national business expenditure on R&D and UIC output levels. Before the recession the relationship was negative, but became positive during the years 2008-2013. The few countries where business expenditure on R&D increased during recession saw UIC numbers rise. This moderating effect of the recession applies only to ‘domestic UICs’, where universities cooperated with business companies located in the same country. Micro-level research is needed to assess the contributing effects on large university-industry R&D consortia on both domestic and international collaboration patterns. (Author)

Industrial Internet of Things-Based Collaborative Sensing Intelligence: Framework and Research Challenges

Science.gov (United States)

Chen, Yuanfang; Lee, Gyu Myoung; Shu, Lei; Crespi, Noel

2016-01-01

The development of an efficient and cost-effective solution to solve a complex problem (e.g., dynamic detection of toxic gases) is an important research issue in the industrial applications of the Internet of Things (IoT). An industrial intelligent ecosystem enables the collection of massive data from the various devices (e.g., sensor-embedded wireless devices) dynamically collaborating with humans. Effectively collaborative analytics based on the collected massive data from humans and devices is quite essential to improve the efficiency of industrial production/service. In this study, we propose a collaborative sensing intelligence (CSI) framework, combining collaborative intelligence and industrial sensing intelligence. The proposed CSI facilitates the cooperativity of analytics with integrating massive spatio-temporal data from different sources and time points. To deploy the CSI for achieving intelligent and efficient industrial production/service, the key challenges and open issues are discussed, as well. PMID:26861345

Industrial Internet of Things-Based Collaborative Sensing Intelligence: Framework and Research Challenges.

Science.gov (United States)

Chen, Yuanfang; Lee, Gyu Myoung; Shu, Lei; Crespi, Noel

2016-02-06

The development of an efficient and cost-effective solution to solve a complex problem (e.g., dynamic detection of toxic gases) is an important research issue in the industrial applications of the Internet of Things (IoT). An industrial intelligent ecosystem enables the collection of massive data from the various devices (e.g., sensor-embedded wireless devices) dynamically collaborating with humans. Effectively collaborative analytics based on the collected massive data from humans and devices is quite essential to improve the efficiency of industrial production/service. In this study, we propose a collaborative sensing intelligence (CSI) framework, combining collaborative intelligence and industrial sensing intelligence. The proposed CSI facilitates the cooperativity of analytics with integrating massive spatio-temporal data from different sources and time points. To deploy the CSI for achieving intelligent and efficient industrial production/service, the key challenges and open issues are discussed, as well.

Industrial Internet of Things-Based Collaborative Sensing Intelligence: Framework and Research Challenges

Directory of Open Access Journals (Sweden)

Yuanfang Chen

2016-02-01

Full Text Available The development of an efficient and cost-effective solution to solve a complex problem (e.g., dynamic detection of toxic gases is an important research issue in the industrial applications of the Internet of Things (IoT. An industrial intelligent ecosystem enables the collection of massive data from the various devices (e.g., sensor-embedded wireless devices dynamically collaborating with humans. Effectively collaborative analytics based on the collected massive data from humans and devices is quite essential to improve the efficiency of industrial production/service. In this study, we propose a collaborative sensing intelligence (CSI framework, combining collaborative intelligence and industrial sensing intelligence. The proposed CSI facilitates the cooperativity of analytics with integrating massive spatio-temporal data from different sources and time points. To deploy the CSI for achieving intelligent and efficient industrial production/service, the key challenges and open issues are discussed, as well.

Energy efficient industrialized housing research program

Energy Technology Data Exchange (ETDEWEB)

Berg, R.; Brown, G.Z.; Finrow, J.; Kellett, R.; Mc Donald, M.; McGinn, B.; Ryan, P.; Sekiguchi, T. (Oregon Univ., Eugene, OR (USA). Center for Housing Innovation); Chandra, S.; Elshennawy, A.K.; Fairey, P.; Harrison, J.; Maxwell, L.; Roland, J.; Swart, W. (Florida Solar Energy Center, Cape Canaveral, FL (USA))

1989-01-01

This is the second volume of a two volume report on energy efficient industrialized housing. Volume II contains support documentation for Volume I. The following items are included: individual trip reports; software bibliography; industry contacts in the US, Denmark, and Japan; Cost comparison of industrialized housing in the US and Denmark; draft of the final report on the systems analysis for Fleetwood Mobile Home Manufacturers. (SM)

Applications of synchrotron X-rays in microelectronics industry research

International Nuclear Information System (INIS)

Jordan-Sweet, Jean L.; Detavernier, Christophe; Lavoie, Christian; Mooney, Patricia M.; Toney, Michael F.

2005-01-01

The high flux and density of X-rays produced at synchrotrons provide the microelectronics industry with a powerful probe of the structure and behavior of a wide array of solid materials that are being developed for use in devices of the future. They also are of great use in determining why currently-used materials and processes sometimes fail. This paper describes the X20 X-ray beamline facility operated by IBM at the National Synchrotron Light Source, and presents a series of three industry challenges and results that illustrate the variety of techniques used and problems addressed. The value of this research ranges from solving short-term, technically specific problems to increasing our academic understanding of materials in general. Techniques discussed include high-resolution diffraction, time-resolved diffraction, texture measurements, and grazing-incidence diffraction

Sports Nutrition Food Industry Chain Development Research

OpenAIRE

Jie Yin

2015-01-01

Through the study of Henan sports nutrition food industry chain optimization, the study analyses development advantage and competitive advantage of Henan in sports nutrition food industry chain and existing problems and challenges in Henan sports nutrition food industry chain and at the same time introduces the theory of supply chain management to the development of sports nutrition food industry chain, clearly optimizes countermeasures of sports nutrition food industry chain. Pointing out sp...

Nutrition labelling: a review of research on consumer and industry response in the global South

Directory of Open Access Journals (Sweden)

Jessie Mandle

2015-01-01

Full Text Available Background: To identify peer-reviewed research on consumers’ usage and attitudes towards the nutrition label and the food industry's response to labelling regulations outside Europe, North America, and Australia and to determine knowledge gaps for future research. Design: Narrative review. Results: This review identified nutrition labelling research from 20 countries in Asia, Africa, the Middle East, and Latin America. Consumers prefer that pre-packaged food include nutrition information, although there is a disparity between rates of use and comprehension. Consumer preference is for front-of-pack labelling and for information that shows per serving or portion as a reference unit, and label formats with graphics or symbols. Research on the food and beverage industry's response is more limited but shows that industry plays an active role in influencing legislation and regulation. Conclusions: Consumers around the world share preferences with consumers in higher income countries with respect to labelling. However, this may reflect the research study populations, who are often better educated than the general population. Investigation is required into how nutrition labels are received in emerging economies especially among the urban and rural poor, in order to assess the effectiveness of labelling policies. Further research into the outlook of the food and beverage industry, and also on expanded labelling regulations is a priority. Sharing context-specific research regarding labelling between countries in the global South could be mutually beneficial in evaluating obesity prevention policies and strategies.

Nutrition labelling: a review of research on consumer and industry response in the global South.

Science.gov (United States)

Mandle, Jessie; Tugendhaft, Aviva; Michalow, Julia; Hofman, Karen

2015-01-01

To identify peer-reviewed research on consumers' usage and attitudes towards the nutrition label and the food industry's response to labelling regulations outside Europe, North America, and Australia and to determine knowledge gaps for future research. Narrative review. This review identified nutrition labelling research from 20 countries in Asia, Africa, the Middle East, and Latin America. Consumers prefer that pre-packaged food include nutrition information, although there is a disparity between rates of use and comprehension. Consumer preference is for front-of-pack labelling and for information that shows per serving or portion as a reference unit, and label formats with graphics or symbols. Research on the food and beverage industry's response is more limited but shows that industry plays an active role in influencing legislation and regulation. Consumers around the world share preferences with consumers in higher income countries with respect to labelling. However, this may reflect the research study populations, who are often better educated than the general population. Investigation is required into how nutrition labels are received in emerging economies especially among the urban and rural poor, in order to assess the effectiveness of labelling policies. Further research into the outlook of the food and beverage industry, and also on expanded labelling regulations is a priority. Sharing context-specific research regarding labelling between countries in the global South could be mutually beneficial in evaluating obesity prevention policies and strategies.

Nutrition labelling: a review of research on consumer and industry response in the global South

Science.gov (United States)

Mandle, Jessie; Tugendhaft, Aviva; Michalow, Julia; Hofman, Karen

2015-01-01

Background To identify peer-reviewed research on consumers’ usage and attitudes towards the nutrition label and the food industry's response to labelling regulations outside Europe, North America, and Australia and to determine knowledge gaps for future research. Design Narrative review. Results This review identified nutrition labelling research from 20 countries in Asia, Africa, the Middle East, and Latin America. Consumers prefer that pre-packaged food include nutrition information, although there is a disparity between rates of use and comprehension. Consumer preference is for front-of-pack labelling and for information that shows per serving or portion as a reference unit, and label formats with graphics or symbols. Research on the food and beverage industry's response is more limited but shows that industry plays an active role in influencing legislation and regulation. Conclusions Consumers around the world share preferences with consumers in higher income countries with respect to labelling. However, this may reflect the research study populations, who are often better educated than the general population. Investigation is required into how nutrition labels are received in emerging economies especially among the urban and rural poor, in order to assess the effectiveness of labelling policies. Further research into the outlook of the food and beverage industry, and also on expanded labelling regulations is a priority. Sharing context-specific research regarding labelling between countries in the global South could be mutually beneficial in evaluating obesity prevention policies and strategies. PMID:25623608

Designing of Success Criteria-based Evaluation Model for Assessing the Research Collaboration between University and Industry

OpenAIRE

Abeda Muhammad Iqbal; Adnan Shahid Khan; Saima Iqbal; Aslan Amat Senin

2011-01-01

Innovations and inventions are not outcomes of single activity of any organization. This is a resultof collaboration of different partners. Collaborated research of university and industry canenhance the ability of scientist to make significant advances in their fields. The evaluation ofcollaborated research between university and industry has created the greatest interest amongstthe collaborational researchers as it can determine the feasibility and value of thecollaboration. This paper inte...

Evaluation method of economic efficiency of industrial scale research based on an example of coking blend pre-drying technology

Directory of Open Access Journals (Sweden)

Żarczyński Piotr

2017-01-01

Full Text Available The research on new and innovative solutions, technologies and products carried out on an industrial scale is the most reliable method of verifying the validity of their implementation. The results obtained in this research method give almost one hundred percent certainty although, at the same time, the research on an industrial scale requires the expenditure of the highest amount of money. Therefore, this method is not commonly applied in the industrial practices. In the case of the decision to implement new and innovative technologies, it is reasonable to carry out industrial research, both because of the cognitive values and its economic efficiency. Research on an industrial scale may prevent investment failure as well as lead to an improvement of technologies, which is the source of economic efficiency. In this paper, an evaluation model of economic efficiency of the industrial scale research has been presented. This model is based on the discount method and the decision tree model. A practical application of this proposed evaluation model has been presented based on an example of the coal charge pre-drying technology before coke making in a coke oven battery, which may be preceded by industrial scale research on a new type of coal charge dryer.

The research on visual industrial robot which adopts fuzzy PID control algorithm

Science.gov (United States)

Feng, Yifei; Lu, Guoping; Yue, Lulin; Jiang, Weifeng; Zhang, Ye

2017-03-01

The control system of six degrees of freedom visual industrial robot based on the control mode of multi-axis motion control cards and PC was researched. For the variable, non-linear characteristics of industrial robot`s servo system, adaptive fuzzy PID controller was adopted. It achieved better control effort. In the vision system, a CCD camera was used to acquire signals and send them to video processing card. After processing, PC controls the six joints` motion by motion control cards. By experiment, manipulator can operate with machine tool and vision system to realize the function of grasp, process and verify. It has influence on the manufacturing of the industrial robot.

Associations between subjective happiness and dry eye disease: a new perspective from the Osaka study.

Science.gov (United States)

Kawashima, Motoko; Uchino, Miki; Yokoi, Norihiko; Uchino, Yuichi; Dogru, Murat; Komuro, Aoi; Sonomura, Yukiko; Kato, Hiroaki; Kinoshita, Shigeru; Mimura, Masaru; Tsubota, Kazuo

2015-01-01

Dry eye disease has become an important health problem. A lack of concordance between self-reported symptoms and the outcome of dry eye examinations has raised questions about dry eye disease. To explore the association between subjective happiness and objective and subjective symptoms of dry eye disease. The study adopted a cross-sectional design. All the employees of a company in Osaka, Japan. 672 Japanese office workers using Visual Display Terminals (age range: 26-64 years). The dry eye measurement tools included the Schirmer test, conjunctivocorneal staining, the tear film break-up time, as well as the administration of a dry eye symptoms questionnaire. Happiness was measured by the Subjective Happiness Scale. Dry eye examination parameters, dry eye symptoms questionnaires, and the Subjective Happiness Scale score. Of the 672 workers, 561 (83.5%) completed the questionnaires and examinations. The mean Subjective Happiness Scale score was 4.91 (SD = 1.01). This score was inversely correlated with the dry eye symptom score (r = -0.188, p happiness was the lowest in the group without objective results, but reported subjective symptoms of dry eyes (p happiness and self-reported symptoms of dry eyes. Findings of this study revealed a new perspective on dry eye disease, including the potential for innovative treatments of a specific population with dry eye disease.

Public status toward radiation and irradiated potatoes at 'Youngster's Science Festival' in several cities including Tokyo, Osaka, and Hiroshima, Japan

International Nuclear Information System (INIS)

Furuta, Masakazu; Hayashi, Toshio; Kakefu, Tomohisa; Nishihara, Hideaki

2000-01-01

'Youngster's Science Festival' has been held in several big cities in various districts in Japan for the purpose of induction of young students' interests in science and scientific experiments. On the basis of the survey results from the participants of the 'Radiation Fair' in Osaka, Japan, which was presented at the last IMRP, we expanded the area of survey and distributed questionnaires to the visitors of the above event to inquire their status toward radiation and irradiated products including irradiated potatoes. The survey results indicated the same trends as that of the 'Radiation Fair' survey. That is, more than half of the older visitors (16 years old and upward) indicated that they recognized the word of 'radiation' when they were at elementary school and the most significant sources of this information were school lessons and the mass media. We will discuss the relationship between consumer's image toward radiation and the description of radiation related topic in school textbooks. (author)

INNOVATIVE AND INDUSTRIAL-PERFORMANCE IN PHARMACEUTICAL RESEARCH-AND-DEVELOPMENT, A MANAGEMENT CONTROL PERSPECTIVE

NARCIS (Netherlands)

OMTA, SWF; BOUTER, LM; VANENGELEN, JML

In this paper management control is related to innovative and industrial performance in 14 non-biotech pharmaceutical companies. The study consisted of questionnaires, sent to the heads of the different research departments of European research laboratories of leading pharmaceutical companies,

Research of Innovation Diffusion on Industrial Networks

Directory of Open Access Journals (Sweden)

Yongtai Chen

2014-01-01

Full Text Available The real value of innovation consists in its diffusion on industrial network. The factors which affect the diffusion of innovation on industrial network are the topology of industrial network and rules of diffusion. Industrial network is a complex network which has scale-free and small-world characters; its structure has some affection on threshold, length of path, enterprise’s status, and information share of innovation diffusion. Based on the cost and attitude to risk of technical innovation, we present the “avalanche” diffusing model of technical innovation on industrial network.

PLM in the Food Industry: An Explorative Empirical Research in the Italian Market

OpenAIRE

Pinna , Claudia; Taisch , Marco; Terzi , Sergio

2016-01-01

Part 5: PLM and Innovation; International audience; The Food and Beverage (F&B) industry has a unique role in all countries’ economies because it is essential to people lives. In this paper, the focus will be on the Italian food industry, one of the main food producer. This study will present the first results of a wider research that has as main aim to understand how PLM is adopted in the food industry, its limits and its challenges. Indeed, the first results show the level of knowledge of P...

Proceedings of the Conference on Industry and Day Care (Urban Research Corporation, Chicago, 1970).

Science.gov (United States)

Urban Research Corp., Chicago, IL.

This booklet of conference proceedings reflects the efforts of the Urban Research Corporation to continue conversation between industry and day care specialists. A group of 175 industry representatives, early childhood specialists, community agency representatives, and day care operators and franchisers convened to discuss their mutual concerns.…

Competitive Research Grants and Industry Collaboration: A Challenge for Universities in the 1990s.

Science.gov (United States)

Johnson, Peter

1993-01-01

The reasons for increased collaboration between Australian universities and industry are examined, focusing on competitive research grant programs developed by the government in the last decade. University and industry response to these opportunities and to issues such as intellectual property rights and publication rights are discussed. (MSE)

Energy Efficient Industrialized Housing Research Program, Center for Housing Innovation, University of Oregon and the Florida Solar Energy Center

Energy Technology Data Exchange (ETDEWEB)

Brown, G.Z.

1990-01-01

This research program addresses the need to increase the energy efficiency of industrialized housing. Two research centers have responsibility for the program: the Center for Housing Innovation at the University of Oregon and the Florida Solar Energy Center, a research institute of the University of Central Florida. The two organizations provide complementary architectural, systems engineering, and industrial engineering capabilities. In 1989 we worked on these tasks: (1) the formation of a steering committee, (2) the development of a multiyear research plan, (3) analysis of the US industrialized housing industry, (4) assessment of foreign technology, (5) assessment of industrial applications, (6) analysis of computerized design and evaluation tools, and (7) assessment of energy performance of baseline and advanced industrialized housing concepts. The current research program, under the guidance of a steering committee composed of industry and government representatives, focuses on three interdependent concerns -- (1) energy, (2) industrial process, and (3) housing design. Building homes in a factory offers the opportunity to increase energy efficiency through the use of new materials and processes, and to increase the value of these homes by improving the quality of their construction. Housing design strives to ensure that these technically advanced homes are marketable and will meet the needs of the people who will live in them.

The EC Maritime Industries Forum 1992: Marine resources and research and development

International Nuclear Information System (INIS)

Jenisch, U.K.

1993-01-01

The Maritime Industries Forum (MIF) of the European Community has prepared a comprehensive report covering all the EC maritime industries. The report, published on October 29, 1992, addresses maritime activities such as shipbuilding, shipping, fishing, energy, marine resources and environmental protection. Focal points are research and development measures and strategies. A major objective is to strengthen the competitiveness of the maritime industries via a global and horizontal approach. This paper briefly analyses the M.I.F. Report and concentrates on the EC interests in the field of marine resources such as oil and gas, potable water, aquaculture and fishing, minerals, OTEC/DOWA as well as the environmentally sound technology that is required to allow for a future oriented and sustainable exploitation. Export opportunities for such new technologies and cooperation with third states are an important objective. The proposals of the M.I.F. Report are of a positive, future-oriented nature, appropriate to replace many of the hitherto defensive policies in the maritime area. The industries recognize the responsibility for the revitalization of their industrial sectors. The method of this broad sectoral approach for a new industrial policy in Europe is innovative and a model in itself. With the installation of three specialized new industrial panels in January 1993 the work continues

FY2000 survey report research and development internationalization in industrial sector among APEC economies

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

A survey is conducted and a database is constructed on internationalization of research and development activities in the industrial sectors of APEC (Asia-Pacific Economic Cooperation Conference) countries, namely, on research and development support systems, research and development appropriations, research and development personnel, research VISA granting procedures and control over foreign funds, trends of research and development among private sector businesses, main research and development organizations, evaluation by private sector businesses of the research and development environments of their countries, and the like. Incorporated into the database are Australia, Brunei, Canada, Chile, China, Hong Kong, Indonesia, Japan, Korea, Malaysia, Mexico, New Zealand, Papua New Guinea, Peru, Philippines, Russia, Singapore, Chinese Taipei, Thailand, United States, and Vietnam. The database, compiled for Internet web pages, CD-ROMs, and publications, covers the industrial technology related policies of all the countries and helps understand the research and development systems, and enables access to main research organizations. The database comprises a general section dealing with the background, system constitution, and internationalization trend and a countries section collecting information on the respective countries. (NEDO)

Research on industrialization of electric vehicles with its demand forecast using exponential smoothing method

Directory of Open Access Journals (Sweden)

Zhanglin Peng

2015-04-01

Full Text Available Purpose: Electric vehicles industry has gotten a rapid development in the world, especially in the developed countries, but still has a gap among different countries or regions. The advanced industrialization experiences of the EVs in the developed countries will have a great helpful for the development of EVs industrialization in the developing countries. This paper seeks to research the industrialization path & prospect of American EVs by forecasting electric vehicles demand and its proportion to the whole car sales based on the historical 37 EVs monthly sales and Cars monthly sales spanning from Dec. 2010 to Dec. 2013, and find out the key measurements to help Chinese government and automobile enterprises to promote Chinese EVs industrialization. Design/methodology: Compared with Single Exponential Smoothing method and Double Exponential Smoothing method, Triple exponential smoothing method is improved and applied in this study. Findings: The research results show that:  American EVs industry will keep a sustained growth in the next 3 months.  Price of the EVs, price of fossil oil, number of charging station, EVs technology and the government market & taxation polices have a different influence to EVs sales. So EVs manufacturers and policy-makers can adjust or reformulate some technology tactics and market measurements according to the forecast results. China can learn from American EVs polices and measurements to develop Chinese EVs industry. Originality/value: The main contribution of this paper is to use the triple exponential smoothing method to forecast the electric vehicles demand and its proportion to the whole automobile sales, and analyze the industrial development of Chinese electric vehicles by American EVs industry.

Biocatalytic pre-treatment processes of cotton : Industrial application of academic research

NARCIS (Netherlands)

Bouwhuis, G.H. (Gerrit); Bouwhuis, G.H. (Gerrit); Brinks, G.J. (Ger); Brinks, G.J. (Ger); Warmoeskerken, van M.M.C.G. (Marijn); Warmoeskerken, van M.M.C.G. (Marijn)

2011-01-01

Much research effort is invested in developing enzymatic treatments of textiles by focusing on the performance of enzymes at the laboratory scale. Despite all of this work, upgrading these developments from the laboratory scale to an industrial scale has not been very successful.Nowadays,companies

Education Program for Doctoral Researchers by Industrial-Government-Academic Cooperation and Interaction between Different Research Fields

Science.gov (United States)

Oki, Kazuya; Sawaragi, Tetsuo; Hasebe, Shinji; Morisawa, Shinsuke

New education program to train graduate students and postdoctoral researchers who can be good leaders in a variety of social fields by cooperation of graduate school of engineering and pharmaceutical sciences is conducted as an advanced activity in Kyoto University. This program consists of four sub-programs and the educational effect by the collaboration of industry-government-academic and the interaction between dissimilar research fields is described in this paper. Trainees in this program acquire the ability to understand objectively one’ s research from comprehensive point of view and to debate with researchers in different fields. This program supports them to become ‘Global Leaders’ who play an important role internationally in advanced technology.

Industry, university and government partnership to address research, education and human resource challenges for nuclear industry in Canada

International Nuclear Information System (INIS)

Mathur, R.M.

2004-01-01

This paper describes the outcome of an important recent initiative of the Canadian nuclear industry to reinvigorate interest in education and collaborative research in prominent Canadian universities. This initiative has led to the formation of the University Network of Excellence in Nuclear Engineering (UNENE), incorporated in 2002. (author)

FY 1999 report on the results of the joint study - project on the industry use photovoltaic power generation field test. 1/3; 1999 nendo sangyonadoyo taiyoko hatsuden field test jigyo kyodo kenkyu seika hokokusho. 1/3

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-07-01

In the field test, solar cell panels were installed on rooftop, and inverters were installed indoors. The electric power generated was connected at high pressure with electric installation of facilities and was also supplied to power equipment, lighting, air conditioning, etc. in facilities. The FY 1999 results were summarized. The installation of photovoltaic power generation facilities at 88 places and the results of the study were summarized in this report including Social Welfare Corporation Seishoen, Maruto Co., Saga Sanyo Industries Co., Koyama Cranial Nerve Surgery/Internal Medicine Hospital, Tsuchiura Urban Development Co., Osaka Alloy Works, Suntory Limited, etc. (NEDO)

The metalcasting industry and future research on the International Space Station

International Nuclear Information System (INIS)

Santner, Joe; Overfelt, Tony

2000-01-01

Fourteen million tons of castings are used annually in ninety percent of all manufactured goods and in all manufacturing machinery making metalcasting the manufacturing backbone of America. There are approximately 3,000 foundries located in 49 states directly providing employment to 200,000 people and indirectly supporting transportation, petrochemical, construction, and other end-user industries. The Solidification Design Center (SDC) began a pioneering effort to address metalcasting industry technical needs to maintain US global leadership in quality, price, and delivery. While individual companies have interacted in the past with the Auburn University SDC, eighty-percent of the foundries employ less than 100 individuals while only six-percent of the foundries employ more than 250 persons. The American Foundrymen's Society (AFS) formed the Solidification Design and Control Consortium to reach the small businesses in the U.S. metalcasting industry. Over a century of operation has proved the AFS committee structure to be a robust management tool. The recognized metalcasting industry technical needs and the unique opportunities that low earth orbit offers foundry process research are described in the present paper. In addition, the metalcasting approach to prioritize proposals, transfer technology developed within the small business community, and the metalcasting industry concerns regarding working with a government aerospace program are also discussed

A novel approach to enhance food safety: industry-academia-government partnership for applied research.

Science.gov (United States)

Osterholm, Michael T; Ostrowsky, Julie; Farrar, Jeff A; Gravani, Robert B; Tauxe, Robert V; Buchanan, Robert L; Hedberg, Craig W

2009-07-01

An independent collaborative approach was developed for stimulating research on high-priority food safety issues. The Fresh Express Produce Safety Research Initiative was launched in 2007 with $2 million in unrestricted funds from industry and independent direction and oversight from a scientific advisory panel consisting of nationally recognized food safety experts from academia and government agencies. The program had two main objectives: (i) to fund rigorous, innovative, and multidisciplinary research addressing the safety of lettuce, spinach, and other leafy greens and (ii) to share research findings as widely and quickly as possible to support the development of advanced safeguards within the fresh-cut produce industry. Sixty-five proposals were submitted in response to a publicly announced request for proposals and were competitively evaluated. Nine research projects were funded to examine underlying factors involved in Escherichia coli O157:H7 contamination of lettuce, spinach, and other leafy greens and potential strategies for preventing the spread of foodborne pathogens. Results of the studies, published in the Journal of Food Protection, help to identify promising directions for future research into potential sources and entry points of contamination and specific factors associated with harvesting, processing, transporting, and storing produce that allow contaminants to persist and proliferate. The program provides a model for leveraging the strengths of industry, academia, and government to address high-priority issues quickly and directly through applied research. This model can be productively extended to other pathogens and other leafy and nonleafy produce.

Water pollution control technology in Japan

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-11-01

This work is a compilation by members of the Committee for Studying Transfer of Environmental Technology on the expertise and technology developed by the members for controlling water pollution in Japan, together with consideration of issues concerning the transfer of environmental technologies to developing countries. The committee is composed of representatives for the Environment Agency, Japan, Osaka Prefectural Government, Osaka Municipal Government, and 25 companies such as manufacturers of environmental equipment. The document contains a total of 93 short papers grouped into sections on: industrial wastewater treatment; sewage treatment; right soil treatment; sludge treatment; and miscellaneous. One paper by the Kausai Electric Power Co., Inc., discusses waste water treatment systems in oil-fired thermal power plants; another describes an internally circulating fluidized bed boiler for cocombusting coal with industrial wastes.

Research on the Mode of Technology Innovation Alliance of the New Material Industry in Hunan Province

Science.gov (United States)

Wang, Fan

2018-03-01

One of the main directions of technology development in the 21st century is the development and application of new materials, and the key to the development of the new material industry lies in the industrial technology innovation. The gross scale of the new material industry in Hunan Province ranks the first array in China. Based on the present situation of Hunan’s new material industry, three modes of technology innovation alliance are put forward in this paper, namely the government-driven mode, the research-driven and the market-oriented mode. The government-driven mode is applicable to the major technology innovation fields with uncertain market prospect, high risk of innovation and government’s direct or indirect intervention;the research-driven mode is applicable to the key technology innovation fields with a high technology content; and the market-oriented mode is applicable to the general innovation fields in which enterprises have demands for technology innovation but such innovation must be achieved via cooperative research and development.

THE ROLE OF RESEARCH IN RESHAPING TEXTILE INDUSTRY

Directory of Open Access Journals (Sweden)

Adriana UNGUREANU

2017-06-01

Full Text Available Apparently, the international competition seems to be moved to the area of investments in new technologies waiting for results in the near future. Nanotechnology is by far the most wanted by investors. The last twenty years the investments in nanotechnology became the priority for all the developed states and this trend was followed by the less developed countries. At the opposite side, there are countries as Romania that seem to lose the start in front of those very active in this field. This paper tries to present the role of the Romanian Research and Development activity to reshape the textile industry through new technologies and nanotechnologies especially. To gather the proper information, the in-depth interview method was used. The conclusions reveal that state keeps the key for a good research activity by offering stable and consistent support. At the same time, a lot of measures or recommendations could be a pragmatic solution to take seriously the role of the research activity to bring its contribution for this big challenge.

Coordination among industry, academic society and regulatory body in the research on aging management

International Nuclear Information System (INIS)

Ishigaki, Hiroki; Osaki, Toru; Kanno, Masanori; Miyano, Hiroshi

2010-01-01

Many activities for the coordinated research on aging management are reviewed, and examples of fruitful results are introduced according to the technical strategy map. Industry-Academia-Government exchanging system of the information each other on aging management was established for autonomy, diversity, collaboration. To clarify the concept of the role of industry, government and academia to address aging management without duplication algorithm is for the overall coordination of industrial and academic information and response issues, technological strategy map for aging management formulated. (author)

The development of laser fusion research

Energy Technology Data Exchange (ETDEWEB)

Mima, Kunioki [Osaka Univ., Suita (Japan). Inst. of Laser Engineering

1998-11-01

Laser fusion research started soon after the invention of laser. In 1972, the research was declassified and nuclear fusion by laser inplosion was proposed by J. Nuckolls. Since then, 26 years has passed and laser implosion experiments demonstrated 1000 times solid density compression. By the demonstration of 1000 times solid density, the mission of the laser fusion research shifted from `implosion physics` to `ignition and high gain`, namely demonstration of fusion output of 100 times input laser energy. By the recent developments of laser technology, ultra intense laser became available and opened up a new ignition scheme which is called `Fast Ignition`. The technology for the diode pumped solid state laser (DPSSL) is developed toward a laser driver for reactor. U.S. and France are constructing MJ lasers for demonstrating ignition and burn and Osaka University is investigating the fast ignition and the equivalent plasma of confinement (EPOC) toward high gain. (author)

The development of laser fusion research

International Nuclear Information System (INIS)

Mima, Kunioki

1998-01-01

Laser fusion research started soon after the invention of laser. In 1972, the research was declassified and nuclear fusion by laser inplosion was proposed by J. Nuckolls. Since then, 26 years has passed and laser implosion experiments demonstrated 1000 times solid density compression. By the demonstration of 1000 times solid density, the mission of the laser fusion research shifted from 'implosion physics' to 'ignition and high gain', namely demonstration of fusion output of 100 times input laser energy. By the recent developments of laser technology, ultra intense laser became available and opened up a new ignition scheme which is called 'Fast Ignition'. The technology for the diode pumped solid state laser (DPSSL) is developed toward a laser driver for reactor. U.S. and France are constructing MJ lasers for demonstrating ignition and burn and Osaka University is investigating the fast ignition and the equivalent plasma of confinement (EPOC) toward high gain. (author)

The Teaching-Research-Industry-Learning Nexus in Information and Communications Technology

Science.gov (United States)

McGill, Tanya; Armarego, Jocelyn; Koppi, Tony

2012-01-01

The teaching-research nexus concept has been extensively examined in the higher education literature, and the importance of industry linkages in information and communications technology (ICT) education has also been widely discussed. However, to date there has been little recognition of the full extent of relationships between aspects of…

Funding of Parkinson research from industry and US federal and foundation sources.

Science.gov (United States)

Dorsey, E Ray; Thompson, Joel P; Frasier, Mark; Sherer, Todd; Fiske, Brian; Nicholson, Sean; Johnston, S Claiborne; Holloway, Robert G; Moses, Hamilton

2009-04-15

Funding for biomedical and neuroscience research has increased over the last decade but without a concomitant increase in new therapies. This study's objectives were to determine the level and principal sources of recent funding for Parkinson disease (PD) research and to determine the current state of PD drug development. We determined the level and principal sources of recent funding for PD research from the following sources: US federal agencies, large PD foundations based in the United States, and global industry. We assessed the status of PD drug development through the use of a proprietary drug pipeline database. Funding for PD research from the sources examined was approximately $1.1 billion in 2003 and $1.2 billion in 2005. Industry accounted for 77% of support from 2003 to 2005. The number of drugs in development for PD increased from 67 in 2003 to 97 in 2007. Of the companies with at least one compound in development for PD in 2007, most were small (62% had annual revenue of less than $100 million), and most (53%) were based outside the United States. These companies will likely require partnerships to drive successful development of new PD therapies.

A research on industrial development of radiation sterilization in Sichuan

International Nuclear Information System (INIS)

Chen Xun; Zhu Rong; Chen Jigang

2010-01-01

Radiation sterilization is widely applied in food processing, Pharmaceutical Manufacturing and medical instrumentation producing. As this industry offers service to related corporations, its development depends largely on the market scale of the relevant industries. This article mainly discusses the balance point between the capacity of radiation sterilization and the requirement of its market. There are less than 1% of the companies in Sichuan which using radiation sterilization for its products, broad prospects has shown in this field. The output value of radiation sterilization industry reached 0.1% of the GDP in some advanced countries (America and Japan...), under this standard, its output value in Sichuan province would be RMB1.2 hundred million, but now our capacity and scale of this industry is less than RMB40million.Research shows: there are 3 key points to make its output value reach 0.1% of the GDP in Sichuan: 1. Breaking the 'bottleneck' restrictions of capacity and Inappropriate resources distribution. 2. Promoting the technique of radiation sterilization, guiding corporation to reduce their dependence on food additive from the perspective of food safety, make effective implantation of radiation sterilization into their manufacture processes. 3. Increasing publicity for radiation sterilization, eliminating scared mentality among customer on nuclear technology, helping manufacturing corporations to establish green environmental protection brand, directing our customer to a more healthy awareness. (authors)

Teaching and Learning of Knot Theory in School Mathematics

CERN Document Server

Kawauchi, Akio

2012-01-01

This book is the result of a joint venture between Professor Akio Kawauchi, Osaka City University, well-known for his research in knot theory, and the Osaka study group of mathematics education, founded by Professor Hirokazu Okamori and now chaired by his successor Professor Tomoko Yanagimoto, Osaka Kyoiku University. The seven chapters address the teaching and learning of knot theory from several perspectives. Readers will find an extremely clear and concise introduction to the fundamentals of knot theory, an overview of curricular developments in Japan, and in particular a series of teaching

Undue industry influences that distort healthcare research, strategy, expenditure and practice: a review.

Science.gov (United States)

Stamatakis, Emmanuel; Weiler, Richard; Ioannidis, John P A

2013-05-01

Expenditure on industry products (mostly drugs and devices) has spiraled over the last 15 years and accounts for substantial part of healthcare expenditure. The enormous financial interests involved in the development and marketing of drugs and devices may have given excessive power to these industries to influence medical research, policy, and practice. Review of the literature and analysis of the multiple pathways through which the industry has directly or indirectly infiltrated the broader healthcare systems. We present the analysis of the industry influences at the following levels: (i) evidence base production, (ii) evidence synthesis, (iii) understanding of safety and harms issues, (iv) cost-effectiveness evaluation, (v) clinical practice guidelines formation, (vi) healthcare professional education, (vii) healthcare practice, (viii) healthcare consumer's decisions. We located abundance of consistent evidence demonstrating that the industry has created means to intervene in all steps of the processes that determine healthcare research, strategy, expenditure, practice and education. As a result of these interferences, the benefits of drugs and other products are often exaggerated and their potential harms are downplayed, and clinical guidelines, medical practice, and healthcare expenditure decisions are biased. To serve its interests, the industry masterfully influences evidence base production, evidence synthesis, understanding of harms issues, cost-effectiveness evaluations, clinical practice guidelines and healthcare professional education and also exerts direct influences on professional decisions and health consumers. There is an urgent need for regulation and other action towards redefining the mission of medicine towards a more objective and patient-, population- and society-benefit direction that is free from conflict of interests. © 2013 Stichting European Society for Clinical Investigation Journal Foundation. Published by Blackwell Publishing Ltd.

The Information System on Occupational Exposure in Medicine, Industry and Research (ISEMIR): Industrial Radiography

Energy Technology Data Exchange (ETDEWEB)

NONE

2014-08-15

for radiation protection and safety provided by the IAEA to its Member States. This publication was developed under the IAEA’s statutory responsibility to provide for the worldwide application of safety standards for the protection of people against exposure to ionizing radiation. It details the results of the Information System on Occupational Exposure in Medicine, Industry and Research (ISEMIR) project during 2009–2012 and, in particular, the activities of the Working Group on Industrial Radiography (WGIR). The ISEMIR project arose from the Occupational Radiation Protection International Action Plan (approved by the IAEA Board of Governors in September 2003), which identified in Action 7 the need to establish networks for the exchange of information on experience and lessons learned between interested parties.

The Information System on Occupational Exposure in Medicine, Industry and Research (ISEMIR): Industrial Radiography

International Nuclear Information System (INIS)

2014-08-01

for radiation protection and safety provided by the IAEA to its Member States. This publication was developed under the IAEA’s statutory responsibility to provide for the worldwide application of safety standards for the protection of people against exposure to ionizing radiation. It details the results of the Information System on Occupational Exposure in Medicine, Industry and Research (ISEMIR) project during 2009–2012 and, in particular, the activities of the Working Group on Industrial Radiography (WGIR). The ISEMIR project arose from the Occupational Radiation Protection International Action Plan (approved by the IAEA Board of Governors in September 2003), which identified in Action 7 the need to establish networks for the exchange of information on experience and lessons learned between interested parties

Aeronautics Education, Research, and Industry Alliance (AERIAL) Progress Report and Proposal for Funding Continuation NASA Nebraska EPSCoR

Science.gov (United States)

Bowen, Brent; Fink, Mary; Gogos, George; Moussavi, Massoum; Nickerson, Jocelyn; Rundquist, Donald; Russell, Valerie; Tarry, Scott

2004-01-01

The Aeronautics Education, Research, and Industry Alliance (AERIAL), which began as a comprehensive, multi-faceted NASA EPSCoR 2000 initiative, has contributed substantially to the strategic research and technology priorities of NASA, while intensifying Nebraska's rapidly growing aeronautics research and development endeavors. AERIAL has enabled Nebraska researchers to: (a) continue strengthening their collaborative relationships with NASA Field Centers, Codes, and Enterprises; (b) increase the capacity of higher education throughout Nebraska to invigorate and expand aeronautics research; and (c) expedite the development of aeronautics-related research infrastructure and industry in the state. Nebraska has placed emphasis on successfully securing additional funds from non-EPSCoR and non-NASA sources. AERIAL researchers have aggressively pursued additional funding opportunities offered by NASA, industry, and other agencies. This report contains a summary of AERIAL's activities and accomplishments during its first three years of implementation.

Research on the competitiveness and development strategy of china's modern coal chemical industry

Science.gov (United States)

Wang, Q.; Han, Y. J.; Yu, Z. F.

2016-08-01

China's modern coal chemical industry has grown into a certain scale after over a decade of development, and remarkable progress has been made in key technologies. But as oil price collapsed since 2015, the economic benefit of the industry also slumped, with loud controversies in China over the necessity of modern coal chemical industry. The research believes that the modern coal chemical industry plays a positive role in the clean and sustainable exploitation of coal in China. It makes profit when oil price is no lower than 60/bbl, and outperforms petrochemical in terms of cost effectiveness when the price is between 60/bbl and 80/bbl. Given the low oil price and challenges posed by environmental protection and water restraints, we suggest that the state announce a guideline quickly, with adjusted tax policies and an encouragement to technological innovation, so that the modern coal chemical industry in China can grow sound and stable.

Environmental research programme. Ecological research. Annual report 1994. Urban-industrial landscapes, forests, agricultural landscapes, river and lake landscapes, terrestrial ecosystem research, environmental pollution and health

International Nuclear Information System (INIS)

1995-01-01

In the annual report 1994 of the Federal Ministry of Research and Technology, the points of emphasis of the ecological research programme and their financing are discussed. The individual projects in the following subject areas are described in detail: urban-industrial landscapes, forests, agricultural landscapes, river and lake landscapes, other ecosystems and landscapes, terrestrial ecosystem research, environmental pollution and human health and cross-sectional activities in ecological research. (vhe) [de

Implementation of Responsible Research and Innovation (RRI Practices in Industry: Providing the Right Incentives

Directory of Open Access Journals (Sweden)

Agata Gurzawska

2017-09-01

Full Text Available Abstract: Responsible Research and Innovation (RRI is a term used by policy-makers and academics to refer to research and innovation that is ethically acceptable and socially desirable. Despite the fact that the vast majority of research and innovation (R&I is funded and produced by industry, companies tend to have no awareness or recognition of this concept. This is unfortunate, as the RRI paradigm could be mutually beneficial for both business and society: it could help businesses realise competitive opportunities while also leading to positive economic, societal and environmental impacts. This paper investigates how industry can be incentivised to engage in research and innovation following the approach of RRI. We propose a matrix of incentives for stimulating the adoption of RRI. We categorise incentives according to three dichotomies: external and internal, instrumental and non-instrumental, direct and indirect. The incentives are formalised in a causal loop diagram, which can be used to demonstrate the sound character of investing in RRI from a business perspective. We discuss examples of incentives, including corporate reputation and critical consumerism, certification, employee engagement, and governance. Lastly, to ensure effective implementation of RRI, we outline factors for the realisation of successful incentives for RRI in industry.

Laser fusion research with GEKKO XII and PW laser system at Osaka

International Nuclear Information System (INIS)

Izawa, Y.; Mima, K.; Azechi, H.; Fujioka, S.; Fujita, H.; Fujimoto, Y.; Jitsuno, T.; Johzaki, Y.; Kitagawa, Y.; Kodama, R.; Kondo, K.; Miyanaga, N.; Nagai, K.; Nagatomo, H.; Nakai, M.; Nishihara, K.; Nishimura, H.; Norimatsu, T.; Shiraga, H.; Shigemori, K.; Sunahara, A.; Tanaka, K.A.; Tsubakimoto, K.; Nakao, Y.; Norreys, P.; Sakagami, H.

2005-01-01

Fast heating of the compressed core plasma up to 500eV has been successfully demonstrated by injecting a 400J/0.6ps PW laser into a compressed CD shell through a hollow gold cone. According to this result, we started the FIREX (Fast Ignition Realization Experiment) project toward demonstrating the ignition of the highly compressed DT fuel by the high energy PW laser heating. A new heating laser LFEX (Laser for Fast Ignition Experiment) is under construction. In this paper the progresses in the experimental studies on scientific issues related to fast ignition and the integrated code development toward the FIREX will be reported. Research results on implosion hydrodynamics, Rayleigh-Taylor instability growth and a new stabilization mechanism are also reported. (author)

Assessment of annual whole-body occupational radiation exposure in education, research and industrial sectors in Ghana (2000-09)

International Nuclear Information System (INIS)

Hasford, F.; Owusu-banahene, J.; Otoo, F.; Adu, S.; Sosu, E. K.; Amoako, J. K.; Darko, E. O.; Emi-reynolds, G.; Nani, E. K.; Boadu, M.; Arwui, C. C.; Yeboah, J.

2008-01-01

Institutions in the education, research and industrial sectors in Ghana are quite few in comparison to the medical sector. Occupational exposure to radiation in the education, research and industrial sectors in Ghana have been analysed for a 10 y period between 2000 and 2009, by extracting dose data from the database of the Radiation Protection Inst. (Ghana)) Atomic Energy Commission. Thirty-four institutions belonging to the three sectors were monitored out of which ∼65 % were in the industrial sector. During the 10 y study period, monitored institutions ranged from 18 to 23 while the exposed workers ranged from 246 to 156 between 2000 and 2009. Annual collective doses received by all the exposed workers reduced by a factor of 2 between 2000 and 2009. This is seen as a reduction in annual collective doses in education/research and industrial sectors by ∼39 and ∼62 %, respectively, for the 10 y period. Highest and least annual collective doses of 182.0 man mSv and 68.5 man mSv were all recorded in the industrial sector in 2000 and 2009, respectively. Annual average values for dose per institution and dose per exposed worker decreased by 49 and 42.9 %, respectively, between 2000 and 2009. Average dose per exposed worker for the 10 y period was least in the industrial sector and highest in the education/research sector with values 0.6 and 3.7 mSv, respectively. The mean of the ratio of annual occupationally exposed worker (OEW) doses for the industrial sector to the annual OEW doses for the education/research sector was 0.67, a suggestion that radiation protection practices are better in the industrial sector than they are in the education/research sector. Range of institutional average effective doses within the education/research and industrial sectors were 0.059-6.029, and 0.110-2.945 mSv, respectively. An average dose per all three sectors of 11.87 mSv and an average dose per exposed worker of 1.12 mSv were realised for the entire study period. The entire

Benchmarking the scientific output of industrial wastewater research in Arab world by utilizing bibliometric techniques.

Science.gov (United States)

Zyoud, Shaher H; Al-Rawajfeh, Aiman E; Shaheen, Hafez Q; Fuchs-Hanusch, Daniela

2016-05-01

Rapid population growth, worsening of the climate, and severity of freshwater scarcity are global challenges. In Arab world countries, where water resources are becoming increasingly scarce, the recycling of industrial wastewater could improve the efficiency of freshwater use. The benchmarking of scientific output of industrial wastewater research in the Arab world is an initiative that could support in shaping up and improving future research activities. This study assesses the scientific output of industrial wastewater research in the Arab world. A total of 2032 documents related to industrial wastewater were retrieved from 152 journals indexed in the Scopus databases; this represents 3.6 % of the global research output. The h-index of the retrieved documents was 70. The total number of citations, at the time of data analysis, was 34,296 with an average citation of 16.88 per document. Egypt, with a total publications of 655 (32.2 %), was ranked the first among the Arab countries followed by Saudi Arabia 300 (14.7 %) and Tunisia 297 (14.6 %). Egypt also had the highest h-index, assumed with Saudi Arabia, the first place in collaboration with other countries. Seven hundred fifteen (35.2 %) documents with 66 countries in Arab/non-Arab country collaborations were identified. Arab researchers collaborated mostly with researchers from France 239 (11.7 %), followed by the USA 127 (6.2 %). The top active journal was Desalination 126 (6.2 %), and the most productive institution was the National Research Center, Egypt 169 (8.3 %), followed by the King Abdul-Aziz University, Saudi Arabia 75 (3.7 %). Environmental Science was the most prevalent field of interest 930 (45.8 %). Despite the promising indicators, there is a need to close the gap in research between the Arab world and the other nations. Optimizing the investments and developing regional experiences are key factors to promote the scientific research.

Assessing consumer responses to potential reduced-exposure tobacco products: a review of tobacco industry and independent research methods.

Science.gov (United States)

Rees, Vaughan W; Kreslake, Jennifer M; Cummings, K Michael; O'Connor, Richard J; Hatsukami, Dorothy K; Parascandola, Mark; Shields, Peter G; Connolly, Gregory N

2009-12-01

Internal tobacco industry documents and the mainstream literature are reviewed to identify methods and measures for evaluating tobacco consumer response. The review aims to outline areas in which established methods exist, identify gaps in current methods for assessing consumer response, and consider how these methods might be applied to evaluate potentially reduced exposure tobacco products and new products. Internal industry research reviewed included published articles, manuscript drafts, presentations, protocols, and instruments relating to consumer response measures were identified and analyzed. Peer-reviewed research was identified using PubMed and Scopus. Industry research on consumer response focuses on product development and marketing. To develop and refine new products, the tobacco industry has developed notable strategies for assessing consumers' sensory and subjective responses to product design characteristics. Independent research is often conducted to gauge the likelihood of future product adoption by measuring consumers' risk perceptions, responses to product, and product acceptability. A model that conceptualizes consumer response as comprising the separate, but interacting, domains of product perceptions and response to product is outlined. Industry and independent research supports the dual domain model and provides a wide range of methods for assessment of the construct components of consumer response. Further research is needed to validate consumer response constructs, determine the relationship between consumer response and tobacco user behavior, and improve reliability of consumer response measures. Scientifically rigorous consumer response assessment methods will provide a needed empirical basis for future regulation of potentially reduced-exposure tobacco products and new products, to counteract tobacco industry influence on consumers, and enhance the public health.

Isotopes in research and industry

Energy Technology Data Exchange (ETDEWEB)

NONE

1961-01-15

A comprehensive review of the present state of the use of radioisotopes in the physical sciences and industry was made at a major international conference in Copenhagen from 6 to 16 September 1960. The conference covers the use of radioisotopes in geophysics, metallurgy, solid state physics and nuclear physics, industrial applications of radioisotopes, which were divided into two groups, namely applications based on the tracer function of isotopes and those based on the penetration, absorption or scattering of radiation, use of isotopes in various branches of chemistry - from analysis to determine extremely small amounts of material to a study of the mechanism of various chemical reactions.

[Research in the pharmaceutical industry cannot be objective].

Science.gov (United States)

Becker-Brüser, Wolfgang

2010-01-01

In the face of tight public budgets more and more studies are being funded by the pharmaceutical industry. At the same time responsibility for conducting company-funded trials is increasingly being shifted to contract research organisations. Pharmaceutical manufacturers sponsor trials that primarily pursue company interests. The dominance of company-funded research does not only have a bearing on the choice of study priorities, though. Company sponsorship also has an influence on the results of trials. Company-funded trials are four times more likely to find evidence in favour of the trial drug than studies funded by other sponsors. There are several contributory factors, from study design (design bias) to data manipulation. And non-publication (publication bias) can distort knowledge. As a result, it is largely impossible to reliably assess the benefit and harm of medical drugs on the basis of published trials. This will have repercussions for the reliability of meta-analyses, guidelines and patient information leaflets. One consequence may be treatment errors.

Research on the Renewable Energy Industry Financing Efficiency Assessment and Mode Selection

Directory of Open Access Journals (Sweden)

Xiaohuan Lyu

2018-01-01

Full Text Available In recent years, environmental issues are attracting widespread attention by various countries around the world. In this context, the renewable energy industry has become a stimulus point for economic development and has great potential for development. Renewable energy industry financing is difficult due to its characteristics of high risk and long-term investment returns, and relying on existing financing channels make it present a glut of excess capacity. It is key to realize resource optimal allocation, solve overcapacity phenomenon and select the valid financing mode. This paper used Bloomberg New Energy Finance (BNEF data and the data envelopment analysis (DEA method to analyze the financing efficiency different parts of the global renewable energy industry and different ways of financing. It could be found that although the financing efficiency showed a trend of increasing year by year, the financing efficiency of each industry presented generally weak DEA efficiency, the comprehensive financing efficiency of wind power industry was higher. The article also found that the financing efficiency of project financing and Research and Development (R&D were relatively high, and the equity market and venture capital and private equity were less efficient. The results of this paper play an important role in the overall financing status cognizance of the renewable energy industry and give suggestions about valid financing mode choice.

Big Data: Challenge and Opportunity for Translational and Industrial Research in Healthcare

Directory of Open Access Journals (Sweden)

Riccardo L. Rossi

2018-05-01

Full Text Available Research and innovation are constant imperatives for the healthcare sector: medicine, biology and biotechnology support it, and more recently computational and data-driven disciplines gained relevance to handle the massive amount of data this sector is and will be generating. To be effective in translational and healthcare industrial research, big data in the life science domain need to be organized, well annotated, catalogued, correlated and integrated: the biggest the data silos at hand, the stronger the need for organization and tidiness. The degree of such organization marks the transition from data to knowledge for strategic decision making. Medicine is supported by observations and data and for certain aspects medicine is becoming a data science supported by clinicians. While medicine defines itself as personalized, quantified (precision med or in high-definition, clinicians should be prepared to deal with a world in which Internet of People paraphrases the Internet of Things paradigm. Integrated use of electronic health records (EHRs and quantitative data (both clinical and molecular is a key process to develop precision medicine. Health records collection was originally designed for patient care and billing and/or insurance purposes. The digitization of health records facilitates and opens up new possibilities for science and research and they should be now collected and managed with this aim in mind. More data and the ability to efficiently handle them is a significant advantage not only for clinicians and life science researchers, but for drugs producers too. In an industrial sector spending increasing efforts on drug repurposing, attention to efficient methods to unwind the intricacies of the hugely complex reality of human physiology, such as network based methods and physical chemistry computational methods, became of paramount importance. Finally, the main pillars of industrial R&D processes for vaccines, include initial discovery

—Research Perspectives at the Interface of Marketing and Operations: Applications to the Motion Picture Industry

OpenAIRE

Sanjeev Swami

2006-01-01

In this comment, I discuss some research issues at the interface of marketing and operations particularly relevant to the motion picture industry. The major focus of my comments will be on the exhibition component of the motion picture value chain. Based on research findings and available data, I discuss the following issues: dynamic and interesting characteristics of the motion picture industry, the applicability of management science tools to artistic products, the practitioners' viewpoint,...

University of Tennessee - Industry collaborative research and development in preventive maintenance technology

International Nuclear Information System (INIS)

Upadhyaya, B.R.

1992-01-01

The Preventive Maintenance Engineering Laboratory (PMEL) was inaugurated at the University of Tennessee Nuclear Engineering Department in September 1989. The startup funding was provided by Gilbert/Commonwealth, Inc. The purpose of PMEL is to identify maintenance-related problems in the power and process industries and to find their solutions through the development and application of emerging technologies. These include advanced digital signal processing, applied artificial intelligence (AI), artificial neural networks, and reliability based methods. The Laboratory activities are being expanded by the formation of an industrial consortium within the Measurement and Control Engineering Center at the University of Tennessee. Several research and development projects in preventive maintenance are being carried out. These include condition monitoring of air operated valves, automated diagnostics of motor operated valves, instrument calibration, verification, and estimation of expected residual life of electric motors using applied AI technology and reliability-based methods. The new methodology will be applied to other industrial subsystems. A long-term research and development project is being sponsored by the T.V.A. Nuclear Maintenance Department. The overall objective of the research program is to develop and apply advanced artificial intelligence and information processing methods to the problems of plant performance monitoring and preventive maintenance. The program includes the development of a workstation/PC-based, networking of plant information for easy access to operational and management personnel, implementation of a sensor verification system, monitoring of feedwater flow venturi fouling and heat rate balance, and integration of signal validation, command validation, and fault-tolerant control strategies

Using tobacco-industry marketing research to design more effective tobacco-control campaigns.

Science.gov (United States)

Ling, Pamela M; Glantz, Stanton A

2002-06-12

To improve tobacco-control efforts by applying tobacco-industry marketing research and strategies to clinical and public health smoking interventions, we analyzed previously secret tobacco-industry marketing documents. In contrast to public health, the tobacco industry divides markets and defines targets according to consumer attitudes, aspirations, activities, and lifestyles. Tobacco marketing targets smokers of all ages; young adults are particularly important. During the 1980s, cost affected increasing numbers of young and older smokers. During the 1990s, eroding social acceptability of smoking emerged as a major threat, largely from increasing awareness of the dangers of secondhand smoke among nonsmokers and smokers. Physicians and public health professionals should use tobacco-industry psychographic approaches to design more relevant tobacco-control interventions. Efforts to counter tobacco marketing campaigns should include people of all ages, particularly young adults, rather than concentrating on teens and young children. Many young smokers are cost sensitive. Tobacco-control messages emphasizing the dangers of secondhand smoke to smokers and nonsmokers undermine the social acceptability of smoking.

COURSE : a new industry led consortium to focus and accelerate energy resources research at Alberta University

Energy Technology Data Exchange (ETDEWEB)

Rodgers, R.J. [Imperial Oil Resources Ltd., Calgary, AB (Canada); Bailey, R. [Alberta Oil Sands Technology and Research Authority, Edmonton, AB (Canada); Kirk, M. [Calgary Univ., AB (Canada); Luhning, R.W. [Petroleum Recovery Inst., Calgary, AB (Canada); Kratochvil, R. [Alberta Univ., Edmonton, AB (Canada)

2000-06-01

This paper described a new initiative entitled COURSE (Coordination of University Research for Synergy and Effectiveness) which has been created through the collaboration of the energy industry, universities and the Alberta government to promote research in the field of energy resources. Calls for research proposals went out in June 1999 and January 2000. The selected projects will be funded by the Alberta Ministry of Innovation and Science through the Alberta Oil Sands Technology and Research Authority (AOSTRA). The major objectives of COURSE are to increase and align fundamental breakthrough university research with the industry needs, and to provide results that exceed what would be achieved by one university alone. An agreement has been reached whereby the universities own the technology and are the exclusive license agents of the research.

Research report of innovation of industrial technology in FY 1996; 1996 nendo sangyo gijutsu no innovation chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

Remarkable innovations of the Japanese industry in various fields have been extracted and evaluated during the 50 post-war years. In this report, a method of capturing the innovations of industrial technology is examined. It is essential to clarify the social role of industrial technology, and the original views of this research are indicated by focusing on the innovation process in order to clarify the connections between those of mutual industry, technical management, man-power, and unique Japanese technology. The innovations achieved by the Japanese industry during post-war 50 years are classified into eight categories, i.e., automobiles, iron, aero-space/railways, machines, national land/energy, chemicals/fine ceramics, electronics/information/communication, and life, to clarify the technological progress in each field. In Japan, the industrial technology has been developed with learning from fundamental researches in Europe and the USA. In the future, it is necessary to independently develop industrial frontier. 4 figs., 47 tabs.

Preservation of nuclear talented experts in Japan by co-operation of industries, research institutes and universities

International Nuclear Information System (INIS)

Mori, H.

2004-01-01

Full text: Nuclear power accounts for about 35% electric power generation in Japan, playing an important role of energy supply. In addition, a commercial scale reprocessing plant is under construction. A real nuclear fuel cycle is imminently close at hand in Japan. COP3 in Kyoto in 1997 called for every country's fight against global warming. Nuclear power in Japan is expected to take another important role from this viewpoint, too. In order to play these expected roles, it is absolutely needed to preserve nuclear talented experts, by maintaining, succeeding and newly developing nuclear technologies. The Atomic Energy Commission of Japan also points out in its report on 'Long-Term Program for Research, Development and Utilization of Nuclear Energy' that research-and development activities are very important to motivate young researchers and engineers who might choose to take nuclear careers. However, young generation capable students seem to avoid majoring nuclear engineering in view of nuclear industry uncertainties in future caused by stagnated Japanese economy since 1990, liberalization of electricity markets, future electricity demand modest forecasts, matured light water reactor technologies, and repeated nuclear accidents inside and outside the country, etc. Aging research facilities at universities are another de-motivating element of causing the reduction of qualifiable students. Consequently, preservation of knowledge and expertise is becoming a big concern for future. According to the survey conducted by the Japan Atomic Industrial Forum (JAIF) over two years since 2002, participated by the members from nuclear industries, universities, research organizations, electricity industries, nuclear plant suppliers and construction contractors, as well as the questionnaire sent to students, there are various issues for preservation of nuclear talented experts in Japan. Although the number of graduates on nuclear engineering is actually about 350 every year, and

Neutron radiography at the HFR Petten

International Nuclear Information System (INIS)

Markgraf, J.F.W.

1990-03-01

This report contains the five papers on neutron radiography activities at the Petten High Flux Reactor (HFR) presented at the Third World Conference on Neutron Radiography which was held in May 1989 in Osaka, Japan. In addition, a survey on neutron radiography in Europe for industry and research as presented at the SITEF NDT symposium 1989 on European Advances in Non-Destructive Testing, held in Toulouse/France in October 1989 is included. The papers compiled here are concerned with: the neutron radiography services available in Petten; the experience with and applications of neutron radiography at Petten; image evaluation and analysis techniques at Petten; the practical utilization of nitrocellulose film in neutron radiography in Europe; an introduction into the basic principles of neutron radiography; an overview of the neutron radiography facilities in Europe for industry and research; and a survey of typical applications of neutron radiography in industry, research and sciences. It is the intention of this compilation to provide a comprehensive overview of the present Petten activities and European facilities in this young and promising field of non-destructive testing of materials and components from the nuclear and the non-nuclear industries and research organizations, and from the sciences

An Industry/Academe Consortium for Achieving 20% wind by 2030 through Cutting-Edge Research and Workforce Training

Energy Technology Data Exchange (ETDEWEB)

Sotiropoulos, Fotis [Univ. of Minnesota, Minneapolis, MN (United States); Marr, Jeffrey D.G. [Univ. of Minnesota, Minneapolis, MN (United States); Milliren, Christopher [Univ. of Minnesota, Minneapolis, MN (United States); Kaveh, Mos [Univ. of Minnesota, Minneapolis, MN (United States); Mohan, Ned [Univ. of Minnesota, Minneapolis, MN (United States); Stolarski, Henryk [Univ. of Minnesota, Minneapolis, MN (United States); Glauser, Mark [Univ. of Minnesota, Minneapolis, MN (United States); Arndt, Roger [Univ. of Minnesota, Minneapolis, MN (United States)

2013-12-01

In January 2010, the University of Minnesota, along with academic and industry project partners, began work on a four year project to establish new facilities and research in strategic areas of wind energy necessary to move the nation towards a goal of 20% wind energy by 2030. The project was funded by the U.S. Department of Energy with funds made available through the American Recovery and Reinvestment Act of 2009. $7.9M of funds were provided by DOE and $3.1M was provided through matching funds. The project was organized into three Project Areas. Project Area 1 focused on design and development of a utility scale wind energy research facility to support research and innovation. The project commissioned the Eolos Wind Research Field Station in November of 2011. The site, located 20 miles from St. Paul, MN operates a 2.5MW Clipper Liberty C-96 wind turbine, a 130-ft tall sensored meteorological tower and a robust sensor and data acquisition network. The site is operational and will continue to serve as a site for innovation in wind energy for the next 15 years. Project Areas 2 involved research on six distinct research projects critical to the 20% Wind Energy by 2030 goals. The research collaborations involved faculty from two universities, over nine industry partners and two national laboratories. Research outcomes include new knowledge, patents, journal articles, technology advancements, new computational models and establishment of new collaborative relationships between university and industry. Project Area 3 focused on developing educational opportunities in wind energy for engineering and science students. The primary outcome is establishment of a new graduate level course at the University of Minnesota called Wind Engineering Essentials. The seminar style course provides a comprehensive analysis of wind energy technology, economics, and operation. The course is highly successful and will continue to be offered at the University. The vision of U.S. DOE to

Government-industry-uUniversity and rResearch lLaboratories cCoordination for new product development: Session 2. Government research laboratory perspective

International Nuclear Information System (INIS)

Kuzay, T.M.

1997-01-01

This talk is the second in an expanded series of presentations on the Government-Industry-University and Research Laboratories Coordination for new product development, which is a timely and important public policy issue. Such interactions have become particularly timely in light of the present decline in funding for research and development (R ampersand D) in the nation''s budget and in the private sector. These interactions, at least in principle, provide a means to maximize benefits for the greater good of the nation by pooling the diminishing resources. National laboratories, which traditionally interacted closely with the universities in educational training, now are able to also participate closely with industry in joint R ampersand D thanks to a number of public laws legislated since the early 80s. A review of the experiences with such interactions at Argonne National Laboratory, which exemplifies the national laboratories, shows that, despite differences in their traditions and the missions, the national laboratory-industry-university triangle can work together

In-plane optical response in underdoped YBCO

Science.gov (United States)

Kakeshita, Teruhisa; Masui, Takahiko; Tajima, Setsuko

2005-03-01

The recent STM experiments demonstrated that the electronic state in CuO2 plane is inhomogeneous [1], which becomes conspicuous in the underdoped regime. In such an inhomogeneous state, it is not obvious whether a superfluid density is correctly estimated by a conventional way. We investigated the in-plane optical response for underdoped YBCO crystal to discuss the relation between inhomogeneity and superfluid density in the pseudo-gapped state. The a-axis optical spectrum shows a larger residual conductivity than that for the optimum doping. The superfluid density estimated from our optical spectrum at the lowest temperature is substantially smaller than that determined by μSR. We discuss this strongly suppressed superfluid density and the large residual conductivity in terms of the inhomogeneity in real- and k-space. This work was supported by the New Energy and Industrial Technology Development Organization(NEDO) through ISTEC as the Collaborative Research and Development of Fundamental Technologies for Superconductivity Applications. [1]K.M.Lang et al., Nature 415, 412 (2002). *present address: Dept. of Physics, Osaka University, Machikaneyama 1-1, Toyonaka, Osaka 560-0043, Japan

Research report for fiscal 1998. Researches on the history and inheritance of industrial technologies (Researches of domestic industrial technologies that greatly contributed to the development of industry); 1998 nendo chosa hokokusho. Sangyo gijutsu rekishi keisho chosa (sangyo no hatten ni okiku kiyoshita kokunai sangyo gijutsu no chosa hen)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

As the contribution increases of Japan's industrial technologies to the development of scientific and economic activities in Japan and abroad, it is of paramount importance to clarify the significance as seen from the historical point of view and to utilize the achievement for the development of Japan's industrial technologies in the future. Researches are conducted into some processes of Japanese origin now enjoying high evaluation as global achievements are reviewed, which involve the separation and purification of butadiene, production of concentrated nitric acid, disproportionation of toluene, polymerization of vinyl chloride in a large reactor, development and practical application of lithium ion secondary batteries, and the enzymatic production of the D-amino acid. As examples of development of chemical technologies, furthermore, researches are undertaken into the ammonia synthesizing technology, production of resorcinol, and coal liquefaction. Also reviewed are data on the history of industries accommodated in museums, and numerous articles of scientific literature written in the period of Shogunate-end through Meiji-beginning to constitute the foundation on which Japan's scientific technologies would make rapid progress. The result gives suggestions for opening a new way toward creative and unique technologies. (NEDO)

Implications of Tobacco Industry Research on Packaging Colors for Designing Health Warning Labels.

Science.gov (United States)

Lempert, Lauren K; Glantz, Stanton A

2016-09-01

Health warning labels (HWLs) are an important way to educate the public about the dangers of tobacco products. Tobacco companies conducted research to understand how pack colors affect consumers' perceptions of the products and make packages and their labeling more visually prominent. We analyzed previously secret tobacco industry documents concerning the tobacco industry's internal research on how cigarette package colors and design influence the visual prominence of packages and consumers' perceptions of the harmfulness of the products. The companies found that black is visually prominent, placing dark pack elements on a contrasting light background makes them stand out more, and black text on a white background is more prominent than white text on a black background. Yellow most quickly and effectively seizes and holds consumers' attention and signals warning or danger, while white connotes health and safety. Using black text on a bright contrasting background color, particularly yellow, attracts consumers' attention to the message. Tobacco industry research on pack color choices that make pack elements more prominent, attract and keep consumers' attention, and convey danger instead of health should guide governments in specifying requirements for HWLs. These factors suggest that HWLs printed on a yellow background with black lettering and borders would most effectively seize and keep consumers' attention and signal the danger of cigarettes and other tobacco products. Tobacco companies' internal research on improving the prominence of pack elements suggests that HWLs using black lettering on a contrasting yellow background would most effectively seize and hold consumers' attention and signal the danger of cigarettes and other tobacco products. © The Author 2016. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Solar diurnal anisotropy measured using muons in GRAPES-3 ...

Indian Academy of Sciences (India)

... A Jain1 S Kawakami2 S D Morris1 P K Nayak1 A Oshima2 B S Rao1. HECR Group, Tata Institute of Fundamental Research, Homi Bhabha Road, Mumbai 400 005, India and GRAPES-3 Experiment, Cosmic Ray Laboratory, Ooty 643 001, India; Graduate School of Science, Osaka City University, Osaka 558-8585, Japan ...

Plunkett's E-Commerce & Internet Business Almanac 2012 E-Commerce & Internet Business Industry Market Research, Statistics, Trends & Leading Companies

CERN Document Server

Plunkett, Jack W

2012-01-01

Market research guide to the e-commerce and Internet business-a tool for strategic planning, competitive intelligence, employment searches or financial research. Contains trends analysis, globalization, trade, statistical tables and an industry glossary. Includes our profiles of nearly 450 top e-commerce and internet industry firms, featuring addresses, phone numbers and executive names.

North Dakota Senior High Industrial Arts Program of Studies--Level II. Research Series No. 80.

Science.gov (United States)

North Dakota State Board for Vocational Education, Bismarck. Research Coordinating Unit.

This industrial arts program of a studies guide is the product of a research project designed to (1) ascertain programs and curricula trends of senior high school industrial arts in the fifty states, (2) develop a philosophical rationale for senior high schools in North Dakota secondary schools, and (3) develop a master plan and program of study…

GAS INDUSTRY GROUNDWATER RESEARCH PROGRAM

Energy Technology Data Exchange (ETDEWEB)

James A. Sorensen; John R. Gallagher; Steven B. Hawthorne; Ted R. Aulich

2000-10-01

The objective of the research described in this report was to provide data and insights that will enable the natural gas industry to (1) significantly improve the assessment of subsurface glycol-related contamination at sites where it is known or suspected to have occurred and (2) make scientifically valid decisions concerning the management and/or remediation of that contamination. The described research was focused on subsurface transport and fate issues related to triethylene glycol (TEG), diethylene glycol (DEG), and ethylene glycol (EG). TEG and DEG were selected for examination because they are used in a vast majority of gas dehydration units, and EG was chosen because it is currently under regulatory scrutiny as a drinking water pollutant. Because benzene, toluene, ethylbenzene, and xylenes (collectively referred to as BTEX) compounds are often very closely associated with glycols used in dehydration processes, the research necessarily included assessing cocontaminant effects on waste mobility and biodegradation. BTEX hydrocarbons are relatively water-soluble and, because of their toxicity, are of regulatory concern. Although numerous studies have investigated the fate of BTEX, and significant evidence exists to indicate the potential biodegradability of BTEX in both aerobic and anaerobic environments (Kazumi and others, 1997; Krumholz and others, 1996; Lovely and others, 1995; Gibson and Subramanian, 1984), relatively few investigations have convincingly demonstrated in situ biodegradation of these hydrocarbons (Gieg and others, 1999), and less work has been done on investigating the fate of BTEX species in combination with miscible glycols. To achieve the research objectives, laboratory studies were conducted to (1) characterize glycol related dehydration wastes, with emphasis on identification and quantitation of coconstituent organics associated with TEG and EG wastes obtained from dehydration units located in the United States and Canada, (2) evaluate

Effects of Recent Climate Change on Hourly Weather Data for HVAC Design: A Case Study of Osaka

Directory of Open Access Journals (Sweden)

Jihui Yuan

2018-03-01

Full Text Available The current design weather data used for heating, ventilation, and air conditioning (HVAC design in Japan was created using an old data period. New design weather data should be created to reflect recent local climate change. Based on our previous proposal of creating design weather data with two weather indices (dry-bulb temperature and enthalpy for HVAC design, design weather data for Osaka was created using more recently-measured weather data (period: 2001~2015 from the Japan Meteorological Agency (JMA in this study. The effect of recent climate change on the design weather data created with eight proposed methods was found. It showed the change in weather elements for cooling design clearly trends to warmer and drier weather, with more solar radiation and lower enthalpy, while the trends in heating design are less clear, mainly showing higher enthalpy. Furthermore, the difference in the peak load for the heating and cooling designs using the new and old design weather data was compared. The comparison showed that the minimum difference in peak load for the heating design was found using the mean daily dry-bulb temperature as the first and second indices; for the cooling design, the minimum difference in peak load was found using mean daily enthalpy as both the first and second indices.

Secret science: tobacco industry research on smoking behaviour and cigarette toxicity.

Science.gov (United States)

Hammond, David; Collishaw, Neil E; Callard, Cynthia

2006-03-04

A lack of scientific data remains the principal obstacle to regulating cigarette toxicity. In particular, there is an immediate need to improve our understanding of the interaction between smoking behaviour and product design, and its influence on cigarette deliveries. This article reviews internal tobacco industry documents on smoking behaviour research undertaken by Imperial Tobacco Limited (ITL) and British-American Tobacco (BAT). BAT documents indicate that smokers vary their puffing behaviour to regulate nicotine levels and compensate for low-yield cigarettes by smoking them more intensely. BAT research also shows that the tar and nicotine delivered to smokers is substantially greater than the machine-smoked yields reported to consumers and regulators. Internal documents describe a strategy to maximise this discrepancy through product design. In particular, BAT developed elastic cigarettes that produced low yields under standard testing protocols, whereas in consumers' hands they elicited more intensive smoking and provided higher concentrations of tar and nicotine to smokers. Documents also show that BAT pursued this product strategy despite the health risks to consumers and ethical concerns raised by senior scientists, and paired it with an equally successful marketing campaign that promoted these cigarettes as low-tar alternatives for health-concerned smokers. Overall, the documents seem to reveal a product strategy intended to exploit the limitations of the testing protocols and to intentionally conceal from consumers and regulators the potential toxicity of BAT products revealed by BAT's own research. Tobacco industry research underscores the serious limitations of the current cigarette testing protocols and the documents describe deceptive business practices that remain in place.

Fundamental Research in Engineering Education. Student Learning in Industrially Situated Virtual Laboratories

Science.gov (United States)

Koretsky, Milo D.; Kelly, Christine; Gummer, Edith

2011-01-01

The instructional design and the corresponding research on student learning of two virtual laboratories that provide an engineering task situated in an industrial context are described. In this problem-based learning environment, data are generated dynamically based on each student team's distinct choices of reactor parameters and measurements.…

NSERC's research and industrial community: a growing force of discovery, people and innovation shaping tomorrow's hydrogen economy

International Nuclear Information System (INIS)

Therrien, R.

2009-01-01

'Full text': As Canada's largest university research-funding agency, the Natural Sciences and Engineering Research Council of Canada (NSERC) supports the training of some 26,500 university students and postdoctoral fellows, funds the research efforts of more than 11,800 university and college professors and stimulates academic-industry research and development (R and D) partnerships involving over 1,400 companies each year. In the hydrogen and fuel cell arena, NSERC has sponsored cutting edge research for over two decades. During that time, the level of activity has intensified significantly - from a mere handful of projects in the early 1980s and 1990s, to more than 150 grants and scholarships in 2008. Since 2002, NSERC's annual support has tripled from about $2.9 million to over $9 million. More than half of that investment is earmarked for university-industry projects involving over 40 fuel cell and hydrogen business interests. NSERC supports hydrogen advances through its Discovery Grants for basic research, Research Partnerships Programs' grants for research and knowledge transfer involving companies, and scholarships and fellowships for skills development. All of these initiatives provide advanced training for students at the post-graduate level, resulting in job-ready professionals who will help shape tomorrow's hydrogen economy. In 2007, NSERC doubled its funding for strategic research partnerships in the area of sustainable energy systems, including hydrogen-related R and D. These public-private partnerships permit companies to capitalize, at minimal cost, on university innovations and training. In addition to supporting project-specific partnerships, the new funds enabled the creation of several national networks that unite industrial and research interests engaged in fuel cell advancement on the one hand, and in hydrogen technologies on the other. The partnership opportunities that exist at NSERC will be briefly described and examples of successful

Radiotracer technology as applied to industry. Final report of a co-ordinated research project 1997-2000

International Nuclear Information System (INIS)

2001-12-01

The Co-ordinated Research Project (CRP) on Radiotracer Technology for Engineering Unit Operation Studies and Unit Process Optimization was carried out by the International Atomic Energy Agency (IAEA) from December 1997 until December 2000. The project developed and validated procedures and protocols for investigation of major industrial processes, including fluidized beds, sugar crystallizers, trickle bed reactors, cement rotary kilns, flotation cells, grinding mills, incinerators, wastewater treatment units and interwell communications in oil fields. This publication is the output of the above mentioned CRP. It provides the principles and state of the art of radiotracer methodology and technology as applied to industry and environment. It is expected to provide wider interest for further development of skills and confidence prior to carrying out field work. It facilitates transfer of technology from developed to developing countries and from nuclear research institutions to industrial end users. The publication could be a suitable guide for radiotracer applications in almost all types of process investigations. The case studies described in this publication deal with typical problems in industry and environment common to all countries. It is intended for radiotracer groups as well as for end engineers and managers from chemical and petrochemical industries, mineral ore and raw material processing, wastewater treatment plants, and other industrial sectors

Research of factors of marketing pricing at domestic industrial enterprises

OpenAIRE

V.V. Bozhkova; I.M. Ryabchenko

2013-01-01

The aim of the article. The purpose of the article is research and systematization of factors of marketing pricing, which affect on realization of products of industrial enterprises.Works of domestic and foreign scientists on this issue were analysed. Traditionally pricing factors are classified into two groups: internal (controlled) and external (uncontrolled). Such division of factors is the first stage of pricing system analysis. On the second stage of analysis each of these groups is divi...

Applications of Novel Scintillators for Research and Industry 2016 (ANSRI 2016)

International Nuclear Information System (INIS)

2016-01-01

In this volume of the Journal of Physics: Conference Series, we present the published proceedings from the '2 nd Workshop on the Applications of Novel Scintillators for Research and Industry (ANSRI).” This workshop was held from the 11-13 th of May, 2016, at University College Dublin, Ireland. The 12 proceedings from this meeting were all presented in oral or poster sessions. More details about this meeting, and the one before it, can be found on the workshop website at http://spacescience.ie/ansri2016/. The scientific program of the 2 nd ANSRI Workshop consisted of 7 invited seminars by world-renowned experts, 23 oral presentations and 6 poster presentations. The workshop was well attended by graduate and post-graduate students, post-docs and professors from academia, and junior staff scientists and researchers from industry. Participants from 14 countries attended the workshop, which covered a wide range of topics that characterise modern advances in the field of scintillator technology. The aim of this meeting was to establish a transfer of knowledge between researchers and industry experts from a wide range of application areas, in the dynamic field of scintillator technology. Moreover, the workshop also sought to help identify new pathways for future research, expanding upon existing networks and building upon current developments. This set of proceedings covers areas including the growth, production and characterisation of scintillators, along with their applications in various fields, which include: Gamma-ray Astronomy, Security and Defence, Beam monitoring, Nuclear Spectroscopy and Nuclear Astrophysics. On behalf of the Local and the Scientific Organising Committees of the 2 nd ANSRI Workshop, we are extremely grateful to all of the authors for providing us with details of their current research in these proceedings, and to the reviewers for their support. We would like to thank Professor Mark McConnell for giving a stimulating public talk during the

Research and innovation to overcome the 'barriers'. The technological and industrial challenges of carbon-free energy

International Nuclear Information System (INIS)

Therme, Jean

2011-01-01

The world energy scene has undergone a thoroughgoing change in less than twenty years. It is ready for a new revolution based on the massive introduction of renewable energy sources along with the associated technology and, also, on ever smarter energy networks for managing supply and demand. As industrial and economic competition intensifies, innovation will be a key factor for winning this battle. Given its worldwide industries and topnotch research centers, France has a few aces up its sleeve. The country has to focus on industrial chains of production, research and innovation; and choose to back those of excellent quality that will help make it a world leader. The examples of photovoltaic conversion and batteries are cited, two fields that France must continue supporting and developing

Presentation of a Novel Model for Evaluation of Commercialization of Research and Development: Case Study of the Pharmaceutical Biotechnology Industry.

Science.gov (United States)

Emami, Hassan; Radfar, Reza

2017-01-01

The current situation in Iran suggests an appropriate basis for developing biotechnology industries, because the patents for the majority of hi-tech medicines registered in developed countries are ending. Biosimilar and technology-oriented companies which do not have patents will have the opportunity to enter the biosimilar market and move toward innovative initiatives. The present research proposed a model by which one can evaluate commercialization of achievements obtained from research with a focus on the pharmaceutical biotechnology industry. This is a descriptive-analytic study where mixed methodology is followed by a heuristic approach. The statistical population was pharmaceutical biotechnology experts at universities and research centers in Iran. Structural equations were employed in this research. The results indicate that there are three effective layers within commercialization in the proposed model. These are a general layer (factors associated with management, human capital, legal infrastructure, communication infrastructure, a technical and executive infrastructures, and financial factors), industrial layer (internal industrial factors and pharmaceutical industry factors), and a third layer that included national and international aspects. These layers comprise 6 domains, 21 indices, 41 dimensions, and 126 components. Compilation of these layers (general layer, industrial layer, and national and international aspects) can serve commercialization of research and development as an effective evaluation package.

Structural fire resistance experimental research priority needs of U.S. industry

CERN Document Server

Almand, Kathleen H

2012-01-01

Structural Fire Resistance Experimental Research – Priority Needs of U.S. Industry provides a synthesis of stakeholder input to a prioritized agenda for research at the National Fire Research Laboratory (NFRL) at the National Institute of Standards and Technology (NIST) designed to accelerate the implementation of performance-based fire engineering for structures. The NFRL presents a broad range of unanswered questions regarding the performance of real structures in fire conditions, and informs performance-based design methods and standards in this field. The authors conducted a comprehensive literature review of large-scale structural fire testing and compiled research needs from a variety of sources. The book addresses major issues of broad concern in the fire community, such as real fire exposure and structural response, composite floor system performance, enhancing modeling performance, and understanding the embedded safety features in design methods. It concludes with a prioritized set of research reco...

The California Central Coast Research Partnership: Building Relationships, Partnerships and Paradigms for University-Industry Research Collaboration

Science.gov (United States)

2007-04-26

thin films. Immobilized MgO nanoparticles in polyelectrolyte thin films of polyethyleneimine and polyacrylic acid have been made and characterized by...and limiting the amount of students in the lab. Potassium Hydroxide (KOH) was studied and characterized for the application of SiO 2 diaphragms due to...Partnerships and Paradigms for University-Industry Research Collaboration. FINAL REPORT ON ONR GRANT NO. N00014-05-1-0855 PERIOD OF PERFORMANCE: June 15

Decommissioning of Medical, Industrial and Research Facilities. Safety Guide

International Nuclear Information System (INIS)

2010-01-01

Radioactive waste is produced in the generation of nuclear power and the use of radioactive materials in industry, research and medicine. The importance of the safe management of radioactive waste for the protection of human health and the environment has long been recognized, and considerable experience has been gained in this field. The IAEA's Radioactive Waste Safety Standards Programme aimed at establishing a coherent and comprehensive set of principles and requirements for the safe management of waste and formulating the guidelines necessary for their application. This is accomplished within the IAEA Safety Standards Series in an internally consistent set of publications that reflect an international consensus. The publications will provide Member States with a comprehensive series of internationally agreed publications to assist in the derivation of, and to complement, national criteria, standards and practices. The Safety Standards Series consists of three categories of publications: Safety Fundamentals, Safety Requirements and Safety Guides. With respect to the Radioactive Waste Safety Standards Programme, the set of publications is currently undergoing review to ensure a harmonized approach throughout the Safety Standards Series. This Safety Guide addresses the subject of decommissioning of medical, industrial and research facilities where radioactive materials and sources are produced, received, used and stored. It is intended to provide guidance to national authorities and operating organizations, particularly to those in developing countries (as such facilities are predominant in these countries), for the planning and safe management of the decommissioning of such facilities. The Safety Guide has been prepared through a series of Consultants meetings and a Technical Committee meeting

Decommissioning of medical, industrial and research facilities. Safety guide

International Nuclear Information System (INIS)

2005-01-01

Radioactive waste is produced in the generation of nuclear power and the use of radioactive materials in industry, research and medicine. The importance of the safe management of radioactive waste for the protection of human health and the environment has long been recognized, and considerable experience has been gained in this field. The IAEA's Radioactive Waste Safety Standards Programme aimed at establishing a coherent and comprehensive set of principles and requirements for the safe management of waste and formulating the guidelines necessary for their application. This is accomplished within the IAEA Safety Standards Series in an internally consistent set of publications that reflect an international consensus. The publications will provide Member States with a comprehensive series of internationally agreed publications to assist in the derivation of, and to complement, national criteria, standards and practices. The Safety Standards Series consists of three categories of publications: Safety Fundamentals, Safety Requirements and Safety Guides. With respect to the Radioactive Waste Safety Standards Programme, the set of publications is currently undergoing review to ensure a harmonized approach throughout the Safety Standards Series. This Safety Guide addresses the subject of decommissioning of medical, industrial and research facilities where radioactive materials and sources are produced, received, used and stored. It is intended to provide guidance to national authorities and operating organizations, particularly to those in developing countries (as such facilities are predominant in these countries), for the planning and safe management of the decommissioning of such facilities. The Safety Guide has been prepared through a series of Consultants meetings and a Technical Committee meeting

Monoclonal antibodies in rheumatoid arthritis: comparative effectiveness of tocilizumab with tumor necrosis factor inhibitors

Directory of Open Access Journals (Sweden)

Tanaka T

2014-04-01

Full Text Available Toshio Tanaka,1,2 Yoshihiro Hishitani,3 Atsushi Ogata2,3 1Department of Clinical Application of Biologics, Osaka University Graduate School of Medicine, Osaka University, Osaka, Japan; 2Department of Immunopathology, WPI Immunology Frontier Research Center, Osaka University, Osaka, Japan; 3Department of Respiratory Medicine, Allergy and Rheumatic Diseases, Osaka University Graduate School of Medicine, Osaka University, Osaka, Japan Abstract: Rheumatoid arthritis (RA is a chronic inflammatory disease characterized by persistent joint inflammation, systemic inflammation, and immunological abnormalities. Because cytokines such as tumor necrosis factor (TNF-α and interleukin (IL-6 play a major role in the development of RA, their targeting could constitute a reasonable novel therapeutic strategy for treating RA. Indeed, worldwide clinical trials of TNF inhibiting biologic disease modifying antirheumatic drugs (bDMARDs including infliximab, adalimumab, golimumab, certolizumab pegol, and etanercept as well as the humanized anti-human IL-6 receptor antibody, tocilizumab, have demonstrated outstanding clinical efficacy and tolerable safety profiles, resulting in worldwide approval for using these bDMARDs to treat moderate to severe active RA in patients with an inadequate response to synthetic disease modifying antirheumatic drugs (sDMARDs. Although bDMARDs have elicited to a paradigm shift in the treatment of RA due to the prominent efficacy that had not been previously achieved by sDMARDs, a substantial percentage of patients failed primary or secondary responses to bDMARD therapy. Because RA is a heterogeneous disease in which TNF-α and IL-6 play overlapping but distinct pathological roles, further studies are required to determine the best use of TNF inhibitors and tocilizumab in individual RA patients. Keywords: interleukin-6, rheumatoid arthritis, adalimumab, biologic

Selected Aspects of Assessment/Improvement of Academic Research Quality, Also of Industrial Management

Directory of Open Access Journals (Sweden)

Jemala Marek

2016-06-01

Full Text Available In terms of publishing and commercialisation of academic research results, there may be more preferred qualitative research in the long term. But, not every research can be focused only on the quality of its outputs, but each output of the research, however, should have an adequate quality and added value. The main research question of this article may be determined as follows – How can the quality of academic research be better evaluated and thus improved, also in the area of Industrial management? It is not the intention of this article to perform statistical research in the field yet, but this study is based on empirical data and results.

Industrial Economics in Scandinavia

DEFF Research Database (Denmark)

Foss, Nicolai Juul; Møllgaard, Peter

2004-01-01

Based on diverse research methods, we trace and map industrial economics research in Denmark, Norway and Sweden in the periode of 1880 to 1908. After describing this research in terms of key contributors, we argue that industrial economics developed rather unevenly in the Scandinavian countries....... Danish research was mainly theoretical and strongly oriented towards the international context, whereas Norwegian research was largely industry analysis with a strong leaning towards managerial economics. Swedish research in industrial economics is very scant until the end of the 1960s.JEL Code: B1, B2...

Regulator and industry Co-operation on safety research: challenges and opportunities. Final report and answers to questionnaire

International Nuclear Information System (INIS)

2003-02-01

A Group has been set up by the CSNI to identify and review the issues which hinder closer co-operation on research between regulators and industry, and to propose possible ways for resolving such issues while maintaining regulatory independence in decision-making. The Group has analyzed the potential advantages and disadvantages of regulator-industry collaboration in safety research and has also provided indications on how to overcome possible difficulties that can arise from such collaboration. The Group focused in particular on the issue of regulator independence, on means to preserve it and ways to demonstrate it to the public while undertaking collaboration with industry

Research of grasping algorithm based on scara industrial robot

Science.gov (United States)

Peng, Tao; Zuo, Ping; Yang, Hai

2018-04-01

As the tobacco industry grows, facing the challenge of the international tobacco giant, efficient logistics service is one of the key factors. How to complete the tobacco sorting task of efficient economy is the goal of tobacco sorting and optimization research. Now the cigarette distribution system uses a single line to carry out the single brand sorting task, this article adopts a single line to realize the cigarette sorting task of different brands. Using scara robot special algorithm for sorting and packaging, the optimization scheme significantly enhances the indicators of smoke sorting system. Saving labor productivity, obviously improve production efficiency.

The use of participant-observation protocol in an industrial engineering research.

Science.gov (United States)

Silveira e Silva, Renato da; Sznelwar, Laerte Idal; D'Afonseca e Silva, Victor

2012-01-01

Based on literature, this article aims to present the "participant-observation' research protocol, and its practical application in the industrial engineering field, more specifically within the area of design development, and in the case shown by this article, of interiors' design. The main target is to identify the concept of the method, i.e., from its characteristics to structure a general sense about the subject, so that the protocol can be used in different areas of knowledge, especially those ones which are committed with the scientific research involving the expertise from researchers, and subjective feelings and opinions of the users of an engineering product, and how this knowledge can be benefic for product design, contributing since the earliest stage of design.

Evaluation of factors associated with the difficulty in finding receiving hospitals for traffic accident patients at the scene treated by emergency medical services: a population-based study in Osaka City, Japan.

Science.gov (United States)

Katayama, Yusuke; Kitamura, Tetsuhisa; Kiyohara, Kosuke; Iwami, Taku; Kawamura, Takashi; Hayashida, Sumito; Ogura, Hiroshi; Shimazu, Takeshi

2017-10-01

Although the prolongation of the time between injury and hospital arrival of traffic accident patients can influence their prognosis, factors associated with the difficulty in hospital acceptance of these patients have not been sufficiently evaluated in Japan. We retrospectively analyzed the population-based ambulance records of all traffic accident patients for whom the Osaka Municipal Fire Department (Osaka City, Japan) dispatched an ambulance in 2013. We defined "cases with difficulty in hospital acceptance" as cases that required ≥4 calls by emergency medical service personnel at the scene before receiving hospital acceptance. We included patient characteristics (age, sex, coma status, and trauma severity judged by emergency medical service personnel), time factors (day/night or weekday/holiday and weekends), and accident location for multivariable logistic regression analysis to assess factors associated with the difficulty in hospital acceptance. Among 13,427 traffic accident patients, 2,033 (15.1%) were cases with difficulty in hospital acceptance. Pediatric patients (adjusted odds ratio [OR], 1.265; 95% confidence interval [CI], 1.060-1.509), male sex (adjusted OR, 1.260; 95% CI, 1.135-1.398), moderate-grade trauma (adjusted OR, 2.241; 95% CI, 1.972-2.547), severe-grade trauma (adjusted OR, 2.057; 95% CI, 1.249-3.388), holidays and weekends (adjusted OR, 1.702; 95% CI, 1.539-1.882), and night-time (adjusted OR, 2.720; 95% CI, 2.443-3.027) were positively associated with difficulty in hospital acceptance. Using population-based ambulance records from a large urban community in Japan, we showed that the difficulty in hospital acceptance of patients at the scene of traffic accidents was positively associated with several prehospital factors.

Federal laboratory nondestructive testing research and development applicable to industry

Energy Technology Data Exchange (ETDEWEB)

Smith, S.A.; Moore, N.L.

1987-02-01

This document presents the results of a survey of nondestructive testing (NDT) and related sensor technology research and development (R and D) at selected federal laboratories. Objective was to identify and characterize NDT activities that could be applied to improving energy efficiency and overall productivity in US manufacturing. Numerous federally supported R and D programs were identified in areas such as acoustic emissions, eddy current, radiography, computer tomography and ultrasonics. A Preliminary Findings Report was sent to industry representatives, which generated considerable interest.

Inattentional blindness: present knowledge, recent research and implications for the nuclear industry

International Nuclear Information System (INIS)

Budau, J.

2011-01-01

Inattentional blindness can occur when our attention has been assigned to a primary task and not enough attentional resources are left to detect what can be a very important unexpected event. This unexpected event is often something that would be detected under normal conditions. Recent research has shown that perceptual load, and qualities of the unexpected stimulus can impact the occurrence of inattentional blindness. As the nuclear industry has situations of high perceptual load, consideration should be given to the implications of this research. (author)

Inattentional blindness: present knowledge, recent research and implications for the nuclear industry

Energy Technology Data Exchange (ETDEWEB)

Budau, J. [Bruce Power, Tiverton, Ontario (Canada)

2011-09-15

Inattentional blindness can occur when our attention has been assigned to a primary task and not enough attentional resources are left to detect what can be a very important unexpected event. This unexpected event is often something that would be detected under normal conditions. Recent research has shown that perceptual load, and qualities of the unexpected stimulus can impact the occurrence of inattentional blindness. As the nuclear industry has situations of high perceptual load, consideration should be given to the implications of this research. (author)

Inattentional blindness: present knowledge, recent research and implications for the nuclear industry

Energy Technology Data Exchange (ETDEWEB)

Budau, J. [Bruce Power, Tiverton, Ontario (Canada)

2011-07-01

Inattentional blindness can occur when our attention has been assigned to a primary task and not enough attentional resources are left to detect what can be a very important unexpected event. This unexpected event is often something that would be detected under normal conditions. Recent research has shown that perceptual load, and qualities of the unexpected stimulus can impact the occurrence of inattentional blindness. As the nuclear industry has situations of high perceptual load, consideration should be given to the implications of this research. (author)

Post-industrial landscape - its identification and classification as contemporary challenges faced by geographic research

Czech Academy of Sciences Publication Activity Database

Kolejka, Jaromír

2010-01-01

Roč. 14, č. 2 (2010), s. 67-78 ISSN 1842-5135 Institutional research plan: CEZ:AV0Z30860518 Keywords : classification * geographical research * identification method * landscape structure Subject RIV: DE - Earth Magnetism, Geodesy, Geography http://studiacrescent.com/images/02_2010/09_jaromir_kolejka_post_industrial_landscape_its_identification_and_classification_as_contemporary_challenges_faced_by_geographic_.pdf

Decommissioning of small medical, industrial and research facilities

International Nuclear Information System (INIS)

2003-01-01

Most of the technical literature on decommissioning addresses the regulatory, organizational, technical and other aspects for large facilities such as nuclear power plants, reprocessing plants and relatively large prototype, research and test reactors. There are, however, a much larger number of licensed users of radioactive material in the fields of medicine, research and industry. Most of these nuclear facilities are smaller in size and complexity and may present a lower radiological risk during their decommissioning. Such facilities are located at research establishments, biological and medical laboratories, universities, medical centres, and industrial and manufacturing premises. They are often operated by users who have not been trained or are unfamiliar with the decommissioning, waste management and associated safety aspects of these types of facility at the end of their operating lives. Also, for many small users of radioactive material such as radiation sources, nuclear applications are a small part of the overall business or process and, although the operating safety requirements may be adhered to, concern or responsibility may not go much beyond this. There is concern that even the minimum requirements of decommissioning may be disregarded, resulting in avoidable delays, risks and safety implications (e.g. a loss of radioactive material and a loss of all records). Incidents have occurred in which persons have been injured or put at risk. It is recognized that the strategies and specific requirements for small facilities may be much less onerous than for large ones such as nuclear power plants or fuel processing facilities, but many of the same principles apply. There has been considerable attention given to nuclear facilities and many IAEA publications are complementary to this report. This report, however, attempts to give specific guidance for small facilities. 'Small' in this report does not necessarily mean small in size but generally modest in terms

Present status of inertial confinement fusion in Japan

International Nuclear Information System (INIS)

Yamanaka, Chiyoe

1984-01-01

The Japanese inertial fusion program has made important progress towards implosion fusion process and the technical development required for realizing the breakeven of inertial fusion energy. The key issues for the ICF research are the development of a high power driver, the pertinent pellet design for implosion by a super computer code, and the diagnostics of implosion process with high space and time resolution. The Institute of Laser Engineering (ILE), Osaka University, is the central laboratory for ICF research in Japan. The ILE Osaka has advanced the Kongo Project aiming at the breakeven of inertial fusion since 1980, and as the first phase, the Gekko 12 Nd glass laser of 20 kJ having 12 beams was constructed. The ILE has also the Lekko 8 CO 2 laser and the Reiden 4 light ion beam machine. In the second phase, a 100 kJ class driver will be provided. At the ILE, rare gas halide lasers such as KrF and ArF have been investigated. Laser plasma coupling, the scaling law for implosion pressure, the invention of a new type target ''Cannonball'', and the development of computer codes are described. Also the activities in universities, government laboratories and industrial companies are reported. (Kako, I.)

The conceptual design of waste repository for radioactive waste from medical, industrial and research facilities containing comparatively high radioactivity

International Nuclear Information System (INIS)

Yamamoto, Masayuki; Hashimoto, Naro

2002-02-01

Advisory Committee on Nuclear Fuel Cycle Backend Policy reported the basic approach to the RI and Institute etc. wastes on March 2002. According to it, radioactive waste form medical, industrial and research facilities should be classified by their radioactivity properties and physical and chemical properties, and should be disposed in the appropriate types of repository with that classification. For the radioactive waste containing comparatively high radioactivity generated from reactors, NSC has established the Concentration limit for disposal. NSC is now discussing about the limit for the radioactive waste from medical, industrial and research facilities containing comparatively high radioactivity. Japan Nuclear Cycle Development Institute (JNC) preliminary studied about the repository for radioactive waste from medical, industrial and research facilities and discussed about the problems for design on H12. This study was started to consider those problems, and to develop the conceptual design of the repository for radioactive waste from medical, industrial and research facilities. Safety assessment for that repository is also performed. The result of this study showed that radioactive waste from medical, industrial and research facilities of high activity should be disposed in the repository that has higher performance of barrier system comparing with the vault type near surface facility. If the conditions of the natural barrier and the engineering barrier are clearer, optimization of the design will be possible. (author)

Research utilization in the building industry: decision model and preliminary assessment

Energy Technology Data Exchange (ETDEWEB)

Watts, R.L.; Johnson, D.R.; Smith, S.A.; Westergard, E.J.

1985-10-01

The Research Utilization Program was conceived as a far-reaching means for managing the interactions of the private sector and the federal research sector as they deal with energy conservation in buildings. The program emphasizes a private-public partnership in planning a research agenda and in applying the results of ongoing and completed research. The results of this task support the hypothesis that the transfer of R and D results to the buildings industry can be accomplished more efficiently and quickly by a systematic approach to technology transfer. This systematic approach involves targeting decision makers, assessing research and information needs, properly formating information, and then transmitting the information through trusted channels. The purpose of this report is to introduce elements of a market-oriented knowledge base, which would be useful to the Building Systems Division, the Office of Buildings and Community Systems and their associated laboratories in managing a private-public research partnership on a rational systematic basis. This report presents conceptual models and data bases that can be used in formulating a technology transfer strategy and in planning technology transfer programs.

The Aeronautics Education, Research, and Industry Alliance (AERIAL) 2002 Report. UNO Aviation Monograph Series. UNOAI Report.

Science.gov (United States)

Bowen, Brent D.; Box, Richard C.; Fink, Mary M.; Gogos, George; Lehrer, Henry R.; Narayanan, Ram M.; Nickerson, Jocelyn S.; O'Neil, Patrick D.; Tarry, Scott E.; Vlasek, Karisa D.

This document contains four papers on aeronautics education, research, and partnerships that partly supported through the Aeronautics Education, Research, and Industry Alliance (AERIAL). The paper "2002 AERIAL Monograph" (Brent D. Bowen, Jocelyn S. Nickerson, Mary M. Fink, et al.) presents an overview of research and development in the…

Radioactive waste management of nuclear materials used in medicine, industry and research

International Nuclear Information System (INIS)

Suarez, A.A.; Miyamoto, H.

1990-01-01

Appropriate radioactive waste management applied to wastes resulting from the use of radionuclides for medical, research, or industrial purposes is to important as those from the nuclear fuel cycle, even considering their lower volumes. The strategy permitting reach the safety standards use procedures and administrative practices based in accumulated experience of various countries during many years. (author) [pt

Tobacco industry globalization and global health governance: towards an interdisciplinary research agenda

Science.gov (United States)

Lee, Kelley; Eckhardt, Jappe; Holden, Chris

2016-01-01

Shifting patterns of tobacco production and consumption, and the resultant disease burden worldwide since the late twentieth century, prompted efforts to strengthen global health governance through adoption of the Framework Convention on Tobacco Control. While the treaty is rightfully considered an important achievement, to address a neglected public health issue through collective action, evidence suggests that tobacco industry globalization continues apace. In this article, we provide a systematic review of the public health literature and reveal definitional and measurement imprecision, ahistorical timeframes, transnational tobacco companies and the state as the primary units and levels of analysis, and a strong emphasis on agency as opposed to structural power. Drawing on the study of globalization in international political economy and business studies, we identify opportunities to expand analysis along each of these dimensions. We conclude that this expanded and interdisciplinary research agenda provides the potential for fuller understanding of the dual and dynamic relationship between the tobacco industry and globalization. Deeper analysis of how the industry has adapted to globalization over time, as well as how the industry has influenced the nature and trajectory of globalization, is essential for building effective global governance responses. This article is published as part of a thematic collection dedicated to global governance. PMID:28458910

Tobacco industry globalization and global health governance: towards an interdisciplinary research agenda.

Science.gov (United States)

Lee, Kelley; Eckhardt, Jappe; Holden, Chris

2016-01-01

Shifting patterns of tobacco production and consumption, and the resultant disease burden worldwide since the late twentieth century, prompted efforts to strengthen global health governance through adoption of the Framework Convention on Tobacco Control. While the treaty is rightfully considered an important achievement, to address a neglected public health issue through collective action, evidence suggests that tobacco industry globalization continues apace. In this article, we provide a systematic review of the public health literature and reveal definitional and measurement imprecision, ahistorical timeframes, transnational tobacco companies and the state as the primary units and levels of analysis, and a strong emphasis on agency as opposed to structural power. Drawing on the study of globalization in international political economy and business studies, we identify opportunities to expand analysis along each of these dimensions. We conclude that this expanded and interdisciplinary research agenda provides the potential for fuller understanding of the dual and dynamic relationship between the tobacco industry and globalization. Deeper analysis of how the industry has adapted to globalization over time, as well as how the industry has influenced the nature and trajectory of globalization, is essential for building effective global governance responses. This article is published as part of a thematic collection dedicated to global governance.

Health technology assessment and comparative effectiveness research: a pharmaceutical industry perspective.

Science.gov (United States)

Hao, Yanni; Thomas, Adrian

2013-08-01

We briefly review the characteristics of several established health technology assessment (HTA) programs in industrialized societies including Germany, the UK and France. Special attention is paid on two issues: the position of HTA in coverage decision making and the role of economic assessment in evaluation processes. Although law makers in the USA have barred the use of NICE's cost/quality-adjusted life year or similar health economics approaches by public payers for coverage decision making, there are suggestions of prioritizing relative efficacy evaluation over economic assessment under a comparative effectiveness research (CER) framework to inform payment rates of public payers (an approach similar to German and French HTA processes). However, such an approach is unlikely to prove viable. It should also be noted that, if cost considerations are made explicit in US CER policy decisions, CER may become an unsustainable approach undermined by a conflicting emphasis on both cost containment and a demand for costly comparative evidence. On the other hand, properly designed CER initiatives can serve as a facilitator of more efficient research activities and drug development models. With these points in mind, the likely pathway of US CER is explored and the plausible impact on industry innovation is discussed.

Research on the development strategy of Pingdingshan iron and steel industry cluster with Wugang Company as the core

Directory of Open Access Journals (Sweden)

Wang Shuai

2017-01-01

Full Text Available Arouse the great potential of the industrial clusters will play a significant role in promoting the development of local WuGang company. The article takes the Pingdingshan City as the research object, who is a typical resource-based city and develops on the basis of the local resources of coal and iron ore, the core enterprise WuGang Company is a large state-owned enterprise based on the wide and thick steel plate production. Many problems also exit in the cluster innovation, company network construction, company cooperation. The article is from the perspective of steel industry cluster and cluster innovation. Firstly, the article introduces the correlation theory about the steel industry cluster and the basic development information of Pingdingshan steel industry cluster, and promotes the research purpose and meaning.The article will give the analysis to the problems from the Pingdingshan steel industry cluster and develop the reform proposals and development strategy according to the actual situation.

Fossil Fuel Industry Funding of Climate-Relevant Research at U.S. Universities

Science.gov (United States)

Franta, B.; Supran, G.

2017-12-01

Commercial producers of lead, tobacco, petroleum, and other products have funded extensive scholarly research in ways designed to confuse the public about the dangers of those products and thwart regulation [1-3]. For example, strategy documentation of the U.S. oil and gas industry from the late 1990s describes using selective support for scientists as a strategy for creating an atmosphere of debate and uncertainty, with the ultimate goal of delaying and defeating climate policies [4]. In this context, we systematically examine current funding from commercial fossil fuel interests of climate-relevant research - such as energy technology and climate policy research - in U.S. universities. We quantify such funding using charitable giving databases, university websites, and other publicly available records. We find that, especially among the most influential universities, climate-related research programs are frequently dominated by funding from fossil fuel interests. Moreover, these relationships sometimes afford funders privileges including formal control over research directions. This work represents an advance in mapping the presence of commercial fossil fuel interests in academia and may contribute to discussions of appropriate funding systems for climate-relevant research. 1. Markowitz, G. and D. Rosner, Lead Wars: The Politics of Science and the Fate of America's Children. 1st ed. 2013: University of California Press. 2. Brandt, A.M., Inventing Conflicts of Interest: A History of Tobacco Industry Tactics. American Journal of Public Health, 2012. 102(1): p. 63-71. 3. Oreskes, N. and E.M. Conway, Merchants of Doubt: How a Handful of Scientists Obscured the Truth on Issues from Tobacco Smoke to Global Warming. 2011: Bloomsbury Press. 4. Walker, J., Global Climate Science Communications Action Plan. 1998. Workshop held at the headquarters of the American Petroleum Institute.

Research on the path of synergetic development between logistics industry and the leading industry in Fujian province

Directory of Open Access Journals (Sweden)

Mei Qiaoping

2017-01-01

Full Text Available Logistics industry is closely related to other industry, the synergetic development between logistics industry and leading industry is benefit for leading industry to reduce costs, improve efficiency and promote industrial upgrading. This book analyzes the association of logistics industry and leading industry on the basis of the input-output tables of Fujian and proposes advises to promote their synergetic development based on the calculation.

Uncertainty in the Sphere of the Industry 4.0 – Potential Areas to Research

Directory of Open Access Journals (Sweden)

Andrzej Magruk

2016-12-01

Full Text Available The world stands on the threshold of a new age of technology, which will launch a fourth industrial revolution (Industry 4.0. According to this idea, web-based network will support smart factories at every stage of the work on the product, from design through to servicing and recycling. It is a vision of a world in which the real environment connects to the digital one using follows driving forces: Internet of things, cloud computing, big data, cyber-physical systems, and others. The Industry 4.0 concept is based on developing smart chains preparation based on communicating with each other means of production, products, components, plants, humans. Established in Germany, the concept of Industry 4.0, is the brainchild – its beginning reaches 2011. It is therefore fraught with high level of uncertainty in many aspects (economic, social, technological, legal, etc.. The main aim of this article is to analyze different dimensions of uncertainty regarding the Industry 4.0, both in terms of opportunities and threats. Due to the freshness of the topic and the great complexity of the Industry 4.0 phenomenon, the main aim of the article is to identify potential areas requiring the necessary research in order minimizing negative – today uncertain – effects occurring in both the design concept Industry 4.0 as well as during its functioning.

AICD -- Advanced Industrial Concepts Division Biological and Chemical Technologies Research Program. 1993 Annual summary report

Energy Technology Data Exchange (ETDEWEB)

Petersen, G.; Bair, K.; Ross, J. [eds.

1994-03-01

The annual summary report presents the fiscal year (FY) 1993 research activities and accomplishments for the United States Department of Energy (DOE) Biological and Chemical Technologies Research (BCTR) Program of the Advanced Industrial Concepts Division (AICD). This AICD program resides within the Office of Industrial Technologies (OIT) of the Office of Energy Efficiency and Renewable Energy (EE). The annual summary report for 1993 (ASR 93) contains the following: A program description (including BCTR program mission statement, historical background, relevance, goals and objectives), program structure and organization, selected technical and programmatic highlights for 1993, detailed descriptions of individual projects, a listing of program output, including a bibliography of published work, patents, and awards arising from work supported by BCTR.

Fiscal 2000 survey report on the survey and research on green technology industry; 2000 nendo green technology industry ni kansuru chosa kenkyu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The approaches of the Government and local autonomies to green technologies are surveyed toward the construction of a green technology industry. The present activities and future outlook of environmental industries interested in green technologies are surveyed and examined, the green technologies here including (1) energy conservation measures and development of non-fossil fuels, (2) energy-related and environmental measures for countering global warming, (3) waste treatment measures for countering dioxins and endocrine disrupters. A survey is conducted of the outlines and future trends of green technology related important studies now under way at laboratories and research institutes of universities, the Government, and private-sector corporations. Based on the results of the surveys, important subjects of technical development in green technologies are extracted and studied for the possibility and outlook of their practical application. Tasks to discharge and problems to occur before they are introduced to the market are also evaluated and confirmed. Based on the results of the research and development of green technologies, actualities of environmental industries are taken up, and the problems and tasks to be settled before environmental technologies are introduced to the market are investigated and studied. (NEDO)

TELEMAN - an European community research and development programme on robotics in the nuclear industry

International Nuclear Information System (INIS)

Tolley, B.; Robertson, B.

1991-01-01

The TELEMAN Programme is a five year cost-shared research programme covering remote handling in hazardous and disordered nuclear environments. It is supported within the current research and development of the European Communities. TELEMAN's strategic objective is to develop advanced teleoperators that respond to the needs of the nuclear industry. Its technical objective is to strengthen the scientific and engineering bases upon which the design of teleoperators for use throughout the nuclear industry rests. This will be done by providing new solutions to problems of manipulation, material transport and mobile surveillance in nuclear environments and by demonstrating their feasibility. Motivation for such a programme lies in the potential teleoperators have to improve the separation of workers from radioactive equipment. This technology will also enable plant operators and public authorities to deal more effectively with nuclear abnormal incidents and increase gains in productivity, mainly in the repair and maintenance area. Community support is justified by the cost of the reliability and autonomy required for the nuclear teleoperator, the need to rationalise R and D investment in an area of increasing industrial potential and a common interest in coherent responses to emergencies. (author)

The competent person in radiation protection: practical radiation protection for industry and research - unsealed sources

International Nuclear Information System (INIS)

Bruchet, H.

2009-01-01

The mission of the competent person in radiation protection has been broadly developed these last years to take an essential function in firm:study of working place, delimitation of regulated areas, monitoring of exposure, relations with authorities. The competent person in radiation protection must follow a training, defined by decree and shared in two parts: a theoretical part used as compulsory subjects and a practical part specific to the different sectors of activity (research, industry, medical centers, nuclear facilities) as well as the radiation use type. This volume corresponds to the practical module devoted to the industrial and research facilities concerned by the possession of management of sealed or unsealed sources. In accordance with the regulations stipulating that this module must allow to apply the theoretical knowledge to concrete situations in work. It includes eight chapters as following: radiation protection in industrial and research facilities, use of sources and associated risks, fitting out professional premises, evaluation of exposure, control of radiation protection; use of detection equipment and radioactive contamination and exposure measurement equipment, associated to methods and calculation tools; radioactive waste management; accidental or damaged situations management; methodology of working place analysis completed by the application to practical cases found in laboratories. (N.C.)

Alcohol industry influence on UK alcohol policy: A new research agenda for public health.

Science.gov (United States)

Hawkins, Benjamin; Holden, Chris; McCambridge, Jim

2012-09-01

The British government has been criticised for according industry interests too much weight in alcohol policy-making. Consequently, it has been argued that alcohol strategy in the UK is built around policies for which the evidence base is weak. This has clear implications for public health. The purpose of this commentary is to map recent developments in UK alcohol policy and related debates within the alcohol policy literature, thus laying the foundations for a systematic examination of the influence of the alcohol industry on alcohol policy. It highlights the changing structure of the industry and summarises what is known about the positions and strategies of industry actors towards alcohol policy. In so doing, it aims to contribute not just to debates about alcohol policy, but to a broader understanding of health policy processes and the relationships between government and other stakeholders. It advances a new research agenda focused on the role of corporate actors in the field of alcohol policy and public health more broadly.

77 FR 36606 - Pipeline Safety: Government/Industry Pipeline Research and Development Forum, Public Meeting

Science.gov (United States)

2012-06-19

...: Threat Prevention --Working Group 2: Leak Detection/Mitigation & Storage --Working Group 3: Anomaly... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket ID PHMSA-2012-0146] Pipeline Safety: Government/Industry Pipeline Research and Development Forum, Public...

Research Investments and Market Structure in the Food Processing, Agricultural Input, and Biofuel Industries Worldwide

OpenAIRE

Fuglie, Keith O.; Heisey, Paul W.; King, John L.; Day-Rubenstein, Kelly A.; Schimmelpfennig, David E.; Wang, Sun Ling

2011-01-01

Meeting growing global demand for food, fiber, and biofuel requires robust investment in agricultural research and development (R&D) from both public and private sectors. This study examines global R&D spending by private industry in seven agricultural input sectors, food manufacturing, and biofuel and describes the changing structure of these industries. In 2007 (the latest year for which comprehensive estimates are available), the private sector spent $19.7 billion on food and agricultural ...

Industry Software Trustworthiness Criterion Research Based on Business Trustworthiness

Science.gov (United States)

Zhang, Jin; Liu, Jun-fei; Jiao, Hai-xing; Shen, Yi; Liu, Shu-yuan

To industry software Trustworthiness problem, an idea aiming to business to construct industry software trustworthiness criterion is proposed. Based on the triangle model of "trustworthy grade definition-trustworthy evidence model-trustworthy evaluating", the idea of business trustworthiness is incarnated from different aspects of trustworthy triangle model for special industry software, power producing management system (PPMS). Business trustworthiness is the center in the constructed industry trustworthy software criterion. Fusing the international standard and industry rules, the constructed trustworthy criterion strengthens the maneuverability and reliability. Quantitive evaluating method makes the evaluating results be intuitionistic and comparable.

Exotic plant species around Jeongeup Research Complex and RFT industrial complex

International Nuclear Information System (INIS)

Kim, Jin Kyu; Cha, Min Kyoung; Ryu, Tae Ho; Lee, Yun Jong; Kim, Jin Hong

2015-01-01

In Shinjeong-dong of Jeongeup, there are three government-supported research institutes and an RFT industrial complex which is currently being established. Increased human activities can affect flora and fauna as a man-made pressure onto the region. As a baseline study, status of exotic plants was investigated prior to a full operation of the RFT industrial complex. A total of 54 species and 1 variety of naturalized or introduced plants were found in the study area. Among them, three species (Ambrosia artemisifolia var. elatior, Rumex acetocella and Aster pilosus) belong to 'nuisance species', and four species (Phytolacca americana, Iopomoea hederacea, Ereechtites hieracifolia and Rudbeckia laciniata) to ‘monitor species’ designated by the ministry of Environment. Some of naturalized trees and plants were intentionally introduced in this area, while others naturally immigrated. Physalis angulata seems to immigrate in the study area in the form of mixture with animal feeds as its distribution coincided with the transportation route of the animal feeds. Liquidambar styraciflua is amenable to the ecological investigation on the possible expansion of the species to the nearby Naejang National Park as its leave shape and autumn color are very similar to those of maple trees. The number of naturalized plants around the RFT industrial complex will increase with an increase in floating population, in human activities in association with constructions of factories and operations of the complex. The result of this study provides baseline data for assessing the ecological change of the region according to the operation of the RFT industrial complex

Exotic plant species around Jeongeup Research Complex and RFT industrial complex

Energy Technology Data Exchange (ETDEWEB)

Kim, Jin Kyu; Cha, Min Kyoung; Ryu, Tae Ho; Lee, Yun Jong; Kim, Jin Hong [Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, Jeongeup(Korea, Republic of)

2015-08-15

In Shinjeong-dong of Jeongeup, there are three government-supported research institutes and an RFT industrial complex which is currently being established. Increased human activities can affect flora and fauna as a man-made pressure onto the region. As a baseline study, status of exotic plants was investigated prior to a full operation of the RFT industrial complex. A total of 54 species and 1 variety of naturalized or introduced plants were found in the study area. Among them, three species (Ambrosia artemisifolia var. elatior, Rumex acetocella and Aster pilosus) belong to 'nuisance species', and four species (Phytolacca americana, Iopomoea hederacea, Ereechtites hieracifolia and Rudbeckia laciniata) to ‘monitor species’ designated by the ministry of Environment. Some of naturalized trees and plants were intentionally introduced in this area, while others naturally immigrated. Physalis angulata seems to immigrate in the study area in the form of mixture with animal feeds as its distribution coincided with the transportation route of the animal feeds. Liquidambar styraciflua is amenable to the ecological investigation on the possible expansion of the species to the nearby Naejang National Park as its leave shape and autumn color are very similar to those of maple trees. The number of naturalized plants around the RFT industrial complex will increase with an increase in floating population, in human activities in association with constructions of factories and operations of the complex. The result of this study provides baseline data for assessing the ecological change of the region according to the operation of the RFT industrial complex.

The Research of Scrapped Automobiles Recycling and Disassembling Industry Development Based on Auto Industry Chain

Directory of Open Access Journals (Sweden)

linhua Pang

2015-01-01

Full Text Available The number of China’s scrapped car is on an explosively growing trend, and the development of scrapped car recycling industry has a golden prospect. The current scrapped car recycling system is not perfect in our country, because related industries driven by market develop slowly, and there are some outstanding problems such as potential safety risks, environmental pollution and resource waste. The paper analyzes and studies the existing problems and countermeasures to investigate the development strategy of scrapped car recycling industry according to the whole automobile industry chain construction, technology and equipment conditions, policy guidance, etc. and at last explore the new industrial development pattern of serving automobile reverse design.

R&D Characteristics and Organizational Structure: Case Studies of University-Industry Research Centers

Science.gov (United States)

Hart, Maureen McArthur

2013-01-01

Within the past few decades, university-industry research centers have been developed in large numbers and emphasized as a valuable policy tool for innovation. Yet little is known about the heterogeneity of organizational structure within these centers, which has implications regarding policy for and management of these centers. This dissertation…

Marketing alcohol to young people: implications for industry regulation and research policy.

Science.gov (United States)

Jackson, M C; Hastings, G; Wheeler, C; Eadie, D; Mackintosh, A M

2000-12-01

This paper focuses on the marketing of alcohol to young people in the United Kingdom, but the lessons that emerge have international significance. Alcohol is a global enterprise and recent consolidation means that it is controlled by a decreasing number of expanding multi-nationals. Alcohol companies are able to allocate significant resources to researching consumer preferences, developing new products and promoting them on an international level. Recent years have seen a growth in the value that youth culture attaches to brand labels and symbols and a move away from the healthy-living ethos. The alcohol industry's response to these trends has been to design alcoholic beverages that appeal to young people, using well-informed and precisely targeted marketing strategies. This has led to growing concerns about the implications for public health and a demand for tighter controls to regulate alcohol marketing practices. In the United Kingdom, controls on alcohol are piecemeal and reactive and the current system of voluntary regulation appears ineffective. This paper argues for more research to establish current industry practice and inform the development of a comprehensive regulatory structure and system of monitoring.

Winning together: research cooperation with China's solar industry; Gemeinsam gewinnen. Forschungskooperation mit Chinas Solarbranche

Energy Technology Data Exchange (ETDEWEB)

Kiefer, Thomas

2012-03-15

The German solar industry is grappling with existential problems, while in China the branch is bounding ahead with vast growth rates. This shows that it is time for a change of perspective and the abandonment of old prejudices. Chinese corporations are investing large sums in research and have an interest of their own in patent protection. In the long term price dumping would put profits at risk, which are above the global industry average among Chinese producers. Especially for German component manufacturers this is not so much a threat than it is an opportunity given the ongoing market growth. After all, research cooperation is one way of securing future business.

ECUT: Energy Conversion and Utilization Technologies program. Industry, university and research interest in the US Department of Energy ECUT biocatalysis research activity

Science.gov (United States)

Wilcox, R. E.

1983-01-01

The results of a Research Opportunity Notice (RON) disseminated by the Jet Propulsion Laboratory for the U.S. Department of Energy Conversion and Utilization Technologies (ECUT) Program's Biocatalysis Research Activity are presented. The RON was issued in late April of 1983 and solicited expressions of interest from petrochemical and chemical companies, bioengineering firms, biochemical engineering consultants, private research laboratories, and universities for participating in a federal research program to investigate potential applications of biotechnology in producing chemicals. The RON results indicate that broad interest exists within the nation's industry, universities, and research institutes for the Activity and its planned research and development program.

Nanotechnology research and development for military and industrial applications

Science.gov (United States)

Ruffin, Paul B.; Brantley, Christina L.; Edwards, Eugene; Roberts, J. Keith; Chew, William; Warren, Larry C.; Ashley, Paul R.; Everitt, Henry O.; Webster, Eric; Foreman, John V.; Sanghadasa, Mohan; Crutcher, Sihon H.; Temmen, Mark G.; Varadan, Vijay; Hayduke, Devlin; Wu, Pae C.; Khoury, Christopher G.; Yang, Yang; Kim, Tong-Ho; Vo-Dinh, Tuan; Brown, April S.; Callahan, John

2011-04-01

Researchers at the Army Aviation and Missile Research, Development, and Engineering Center (AMRDEC) have initiated multidiscipline efforts to develop nano-based structures and components for insertion into advanced missile, aviation, and autonomous air and ground systems. The objective of the research is to exploit unique phenomena for the development of novel technology to enhance warfighter capabilities and produce precision weapons. The key technology areas that the authors are exploring include nano-based microsensors, nano-energetics, nano-batteries, nano-composites, and nano-plasmonics. By integrating nano-based devices, structures, and materials into weaponry, the Army can revolutionize existing (and future) missile systems by significantly reducing the size, weight and cost. The major research thrust areas include the development of chemical sensors to detect rocket motor off-gassing and toxic industrial chemicals; the development of highly sensitive/selective, self-powered miniaturized acoustic sensors for battlefield surveillance and reconnaissance; the development of a minimum signature solid propellant with increased ballistic and physical properties that meet insensitive munitions requirements; the development of nano-structured material for higher voltage thermal batteries and higher energy density storage; the development of advanced composite materials that provide high frequency damping for inertial measurement units' packaging; and the development of metallic nanostructures for ultraviolet surface enhanced Raman spectroscopy. The current status of the overall AMRDEC Nanotechnology research efforts is disclosed in this paper. Critical technical challenges, for the various technologies, are presented. The authors' approach for overcoming technical barriers and achieving required performance is also discussed. Finally, the roadmap for each technology, as well as the overall program, is presented.

Hard X-ray synchrotron light source for industrial and materials research applications

International Nuclear Information System (INIS)

Lehr, H.; Ehrfeld, W.; Moser, H.O.; Schmidt, M.; Herminghaus, H.

1992-01-01

The requirements for industrial production or for an industry-related analytical environment is demonstrated for the case of the proposed hard X-ray synchrotron light source. The source is intended to provide radiation mainly for deep X-ray lithography as part of the LIGA-process in microfabrication, and for analytical and diagnostic purposes in materials research and microtechnology. It offers up to 48 bending magnet beamlines with a characteristic wavelength of 2 A. An electron energy of 2.5 GeV and normal conducting magnets will be used. A FODO lattice with a beam emittance of 3x10 -7 m rad and four dispersion-free straight sections to accommodate insertion devices, injection elements and RF structures has been designed. (R.P.) 5 refs.; 4 figs.; 1 tab

West African Journal of Industrial and Academic Research

African Journals Online (AJOL)

... communications, state-of-the-art developments in Information and communications technology, ... physics, industrial electronics, management sciences and engineering, industry chemistry, general technology rocketry, space and ... application of communications and information technology to these fields of importance.

Industrialized Innovation: The Connection of Science & Technology Innovation with Industrial Innovation

Institute of Scientific and Technical Information of China (English)

Yinxing Hong; Yao Lu; Jianghuai Zheng

2017-01-01

In light of the relationship and the current disconnection between science & technology (S&T) innovation and industrial innovation in China,it is necessary to put forward and emphasize the concept of industrialized innovation.Industrialized innovation is the bridge and intermediation between S&T innovation and industrial innovation,which is not only a concept,but also a mechanism and combination force.There are two ways to achieve industrialized innovation:through industry-university-research coordination and through technology entrepreneurship.The meaning of industry-university-research coordination is not about coordination among industry,university and research sectors in an institutional sense;rather it is about the coordination of the functions of cultivation and development in new industries,new technologies,and new talents of industrialized innovation.The incentive mechanism for industrialized innovation should motivate not only innovation but also coordination.Technology entrepreneurship is the industrialization of new technology through business start-ups,which occurs beyond the stage of incubation and development of new technology.The capital of technology entrepreneurship is the set consisting of knowledge capital manifested through technological innovation,human capital manifested through entrepreneurs,and physical capital in the form of venture capital.While physical capital is indispensable,knowledge capital and human capital play the decisive role in technology entrepreneurship.The industrialization of technological innovation involves two requirements:one is to enable the new technology industry to achieve a large scale rapidly,and the other is to fully realize the potential value of the new technology.Both requirements are reliant on effective innovation in business models.

Structural dynamics of the ΔE22 (Osaka) familial Alzheimer's disease-linked amyloid β-protein.

Science.gov (United States)

Inayathullah, Mohammed; Teplow, David B

2011-09-01

A familial form of Alzheimer disease recently was described in a kindred in Osaka, Japan. This kindred possesses an amyloid β-protein (Aβ) precursor mutation within the Aβ coding region that results in the deletion of Glu22 (ΔE22). We report here results of studies of [ΔE22]Aβ40 and [ΔE22]Aβ42 that sought to elucidate the conformational dynamics, oligomerization behavior, fibril formation kinetics, fibril morphology, and fibril stability of these mutant peptides. Both [ΔE22]Aβ peptides had extraordinary β-sheet formation propensities. The [ΔE22]Aβ40 mutant formed β-sheet secondary structure elements ≈400-fold faster. Studies of β-sheet stability in the presence of fluorinated alcohol cosolvents or high pH revealed that the ΔE22 mutation substantially increased stability, producing a rank order of [ΔE22]Aβ42 >Aβ42 > [ΔE22]Aβ40 > Aβ40. The mutation facilitated formation of oligomers by [ΔE22]Aβ42 (dodecamers and octadecamers) that were not observed with Aβ42. Both Aβ40 and Aβ42 peptides formed nebulous globular and small string-like structures immediately upon solvation from lyophilizates, whereas short protofibrillar and fibrillar structures were evident immediately in the ΔE22 samples. Determination of the critical concentration for fibril formation for the [ΔE22]Aβ peptides showed it to be ≈1/2 that of the wild type homologues, demonstrating that the mutations causes a modest increase in fibril stability. The magnitude of this increase, when considered in the context of the extraordinary increase in β-sheet propensity for the ΔE22 peptides, suggests that the primary biophysical effect of the mutation is to accelerate conformational changes in the peptide monomer that facilitate oligomerization and higher-order assembly.

76 FR 6497 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Industrial...

Science.gov (United States)

2011-02-04

..., 15 U.S.C. 4301 et seq. (``the Act''), Industrial Nacromolecular Crystallography Association (``INCA... activity of the group research project. Membership in this group research project remains open, and INCA..., INCA filed its original notification pursuant to Section 6(a) of the Act. The Department of Justice...

Micro factors bringing the pharmaceutical industry to a seismic shaking a qualitative research.

Science.gov (United States)

Dierks, Raphaela Marie Louisa; Bruyère, Olivier; Reginster, Jean-Yves

2017-06-01

Due to changing macro and micro factors, expiring patents and falling net income, pharmaceutical companies need to rethink their vertical business model. The trend shows cross-sectorial partnerships and consolidation to remain and compete on the market. Areas covered: Quantitative research interviewing a target group of 25 key executives from small, mid and large global pharmaceutical companies rounded with qualitative literature research completing the analysis. Expert commentary: Uncertainty in the industry due to changing external factors i.e. pricing pressures, regulations or an economic slowdown, slowing down innovations and new drug outcomes. Pharmaceutical companies understand the existing hurdles, and are critically optimistic implementing new business models. Also, various stakeholders are included in the value chain due to their growing importance. During the next years, the industry will be restructured from volume towards value, and only pharmaceutical companies' clairaudient and reciprocate to the changes with an out-off the box thinking will be able to resist on the market. Small biotech companies should focus on research, and big pharmaceutical companies entering at development focusing on the process until the distribution. This execution business recommendation would enable the best know-how at the right point, mitigating the risk and enhancing the patient outcomes.

An analysis of the impact of the thermonuclear pilot project ITER on industry and research in Austria

International Nuclear Information System (INIS)

Hangel, G.

2007-03-01

An analysis of the influence of the thermonuclear pilot project ITER on Austrian research and industrial activities is presented in terms of the following subjects: fusion research history, ITER technique, security, nuclear fusion, ITER (reactor, project specifications for quotations), possibilities for Austrian companies and fusion research in Austria. (nevyjel)

KEUNGGULAN KOMPETITIF INDUSTRI KECIL DI KLASTER INDUSTRI KECIL TRADISIONAL DENGAN PENDEKATAN BERBASIS SUMBER DAYA: STUDI KASUS PENGUSAHA INDUSTRI KECIL LOGAM KIARA CONDONG, BANDUNG

Directory of Open Access Journals (Sweden)

Widjajani Widjajani

2008-01-01

Full Text Available Small-scale industries play an important role in the betterment of society. Industrial cluster approach has been used by government as an alternative government policy to increase competitiveness of small-scale industries in Indonesia. An industry cluster consists of core enterprise(s and related enterprises in which the core acts as a pulling agent for the other counterparts. Therefore, developing the core enterprises is expected to increase competitiveness of the whole cluster. This research is a strategy process research, aiming at identifying and modeling strategic behavior of a successful entrepreneur in a metal-making cluster industry at Kiara Condong Bandung, West Java. Based on the literature review, qualitative research methodology is used in this research by combining soft systems methodology (SSM and grounded theory. The major findings of this research indicate four kinds of strategic behavior models, namely behavior model of strategy setting, behavior model of production operations, behavior model of research and development and innovation and behavior model of marketing operations. Abstract in Bahasa Indonesia: Industri kecil mempunyai peranan penting dalam meningkatkan kesejahteraan masyarakat. Pendekatan klaster industri dicanangkan oleh pemerintah sebagai alternatif kebijakan pemerintah untuk membangun keunggulan kompetitif di industri kecil. Di suatu klaster industri kecil yang terdiri dari unit usaha inti dan unit usaha penunjang, unit usaha inti merupakan gerbong penghela klaster. Oleh karena itu mengembangkan usaha inti sehingga mempunyai keunggulan kompetitif diharapkan dapat mengembangkan klaster secara keseluruhan. Penelitian ini merupakan penelitian proses strategi (strategy process research yang meneliti perilaku strategis manajer pemilik industri kecil dalam mengelola usahanya untuk membangun keunggulan kompetitif dengan pendekatan berbasis sumber daya (Resource-Based View atau RBV dan mengambil studi kasus pengusaha

Determinant factors of industrial symbiosis: greening Pasir Gudang industrial park

Science.gov (United States)

Teh, B. T.; Ho, C. S.; Matsuoka, Y.; Chau, L. W.; Gomi, K.

2014-02-01

Green industry has been identified as an important element in attaining greater sustainability. It calls for harmonizing robust economic growth with environment protection. Industries, particularly in developing and transitional nations such as Malaysia, are in need of a reform. Many experts and international organizations suggest the concept of industrial symbiosis. Mainly, there are successful cases of industrial symbiosis practices around the world. However, there are numerous cases of failure too. As industrial symbiosis is an emerging new approach, with a short history of two decades, a lot of researches are generally focused on narrow context and technical details. There is a lack of concerted efforts to look into the drivers and barriers of industrial symbiosis across different cases. This paper aims to examine the factors influencing the development of industrial symbiosis from various countries to supports such networks to evolve in Pasir Gudang. The findings show institution, law and regulation, finance, awareness and capacity building, technology, research and development, information, collaboration, market, geography proximity, environmental issues and industry structure affect the formation of industrial symbiosis.

Determinant factors of industrial symbiosis: greening Pasir Gudang industrial park

International Nuclear Information System (INIS)

Teh, B T; Ho, C S; Chau, L W; Matsuoka, Y; Gomi, K

2014-01-01

Green industry has been identified as an important element in attaining greater sustainability. It calls for harmonizing robust economic growth with environment protection. Industries, particularly in developing and transitional nations such as Malaysia, are in need of a reform. Many experts and international organizations suggest the concept of industrial symbiosis. Mainly, there are successful cases of industrial symbiosis practices around the world. However, there are numerous cases of failure too. As industrial symbiosis is an emerging new approach, with a short history of two decades, a lot of researches are generally focused on narrow context and technical details. There is a lack of concerted efforts to look into the drivers and barriers of industrial symbiosis across different cases. This paper aims to examine the factors influencing the development of industrial symbiosis from various countries to supports such networks to evolve in Pasir Gudang. The findings show institution, law and regulation, finance, awareness and capacity building, technology, research and development, information, collaboration, market, geography proximity, environmental issues and industry structure affect the formation of industrial symbiosis

Selected finelings on current research into applications of ionizing radiation in food industry

International Nuclear Information System (INIS)

Salkova, Z.

1979-01-01

A review is presented of research of the application of ionizing radiation in the food industry, mainly for the inhibition of potato and onion germination and for radappertization of soft fruits. Current laws governing the irradiation of food are described and the current knowledge of the practical application of the new technology is indicated. (author)

University-Industry Interaction: Reserach and Career Opportunities - Good for Industry, Faculty and Students

Science.gov (United States)

Schneider, John

1997-03-01

Industry sponsorship of research at universities is growing and becoming more important as funding resources change. In addition, re-engineering at industries has forced them to review how and what they sponsor at universities. Well thought out and understood "partnerships" between companies and universities can be good for everyone. Students receive scholarships, research opportunities, exposure to industry life and career/job opportunities. Faculty receive funds for their research, exposure to real-world problems, equipment, consulting opportunities and more. . Universities receive funds for research, scholarships, etc. In addition, there are opportunities for royalties and donations that help everyone. . The public gains trained students, research advances that lead to better and lower cost products, and economic growth. A concern faculty often express is that they would have to do "applied" and not leading edge research. It is true that industry will not fund "any" research; they want to support research that solves their current needs or could lead to break-throughs in products they can commercialize. Many industrial scientists counter academic concerns by stating that doing practical research can and usually is fundamental and discovery oriented. University-Industry collaboration research has been good for all and can continue to be so. Leading organizations such as the National Science Foundation and the Council on Competitiveness are stressing the need for collaborative partnerships. Universities are creating education programs that bring the basic sciences in contact with the applied world.

Patient Outcomes as Transformative Mechanisms to Bring Health Information Technology Industry and Research Informatics Closer Together.

Science.gov (United States)

Krive, Jacob

2015-01-01

Despite the fast pace of recent innovation within the health information technology and research informatics domains, there remains a large gap between research and academia, while interest in translating research innovations into implementations in the patient care settings is lacking. This is due to absence of common outcomes and performance measurement targets, with health information technology industry employing financial and operational measures and academia focusing on patient outcome concerns. The paper introduces methodology for and roadmap to introduction of common objectives as a way to encourage better collaboration between industry and academia using patient outcomes as a composite measure of demonstrated success from health information systems investments. Along the way, the concept of economics of health informatics, or "infonomics," is introduced to define a new way of mapping future technology investments in accordance with projected clinical impact.

INDUSTRY-UNIVERSITY COLLABORATION FROM THE POINT OF VIEW OF COMPANIES AS RESEARCH CUSTOMERS

DEFF Research Database (Denmark)

Gerstlberger, Wolfgang; Kesting, Tobias

With regard to the increasing competitive situation in many industries due to continuous globalisation, companies more and more have to take into account external research support in order to maintain or even improve their competitiveness. In order to gain new and more detailed insights...... provide the core for a proposed segmentation framework concept for universities as suppliers on research markets. Following this idea, combined with the theoretical framework of market segmentation and transferring the customer segmentation approach to research markets, our paper gives concrete managerial...... into the actual experiences and perceived benefits of companies cooperating with universities and other external research institutions concerning particularly innovation-related support like product or prototype development, we conducted a transnational empirical survey in 2009. It addressed companies from...

Industrial process gamma tomography. Final report of a coordinated research project 2003-2007

International Nuclear Information System (INIS)

2008-05-01

Gamma computed tomography (CT) is complementary to radiotracer and gamma sealed source techniques largely used for analyzing industrial process units. Relevant target areas for gamma CT applications are generally known. Although the methodology is generic and applicable across broad industrial specimen and facilities, a number of specific items have been identified as the most appropriate target beneficiaries of these applications: distillation columns; packed beds; risers; fluidized beds and other multiphase processing units. These industrial process units present significant technical challenges to CT investigations in terms of the complexity of the multiphase flows that occur in them. In order to address these needs, the IAEA implemented a Coordinated Research Project (CRP) on Industrial Process Gamma Tomography with the overall objective of testing and validating CT techniques for diagnosing industrial multiphase processes. CT laboratories from Argentina, Brazil, Czech Republic, France, Republic of Korea, Malaysia, Norway, Poland, United Kingdom and the United States of America have participated. The specific objectives of the CRP were assessment of the tomographic methods, evaluation of them for investigation of multiphase engineering processes, and design of prototypes of simple CT systems for industrial processing, which can be transferred to other developing countries. The CRP has generated an active network, which also included other groups engaged in the CT field. The round robin test has played an important role in validation of techniques and software. This TECDOC is prepared based on the findings and achievements of the CRP. It is a comprehensive technical report containing valuable information, not readily available in any single publication elsewhere. The participants' reports and software developed by them are compiled in a CD-ROM and attached to the back cover. The guidelines and software packages described in this report can be used as an

Mathematical experimental modeling for muffle furnace drying process of municipal sewage sludge in Beijing and Osaka

International Nuclear Information System (INIS)

Li, Xinyi; Takaoka, Masaki; Zhu, Fenfen; Oshita, Kazuyuki; Mizuno, Tadao; Morisawa, Shinsuke

2010-01-01

Over the past two decades, China has experienced rapid urbanization, which also leads to a lot of environmental problems including those of sewage sludge. As the amount of sewage sludge increases, conventional methods of treatment, such as compost and landfill, are facing the problems of limitations in demands or land. Considering that the demand of constructive materials in China keeps increasing, reusing municipal sewage sludge (MSS) in cement manufactory plant as fuels and raw materials is another practicable way to deal with it. The aim of this study is to describe the process of the heating of sewage sludge under different atmospheres of nitrogen and oxygen, and to find out some relation between the moisture of MSS and the heating time under different surrounding temperature by means of a mathematical model. In this study, we compared 4 kinds of MSS sampled in Beijing and Osaka. First of all, we defined the differences in those fundamental physical properties, such as concentration of various elements, calorific values and so on. Then the macroscopical thermal properties of the sludges were observed by means of thermogravimetric (TG) analysis. Both pyrolysis and combustion of 4 samples of MSS were studied by TG dynamic runs carried out at 10K/m. Visual observation of the heating profiles shows three stages in the heating process, which have been characterized. At last, we focused on batch processing drying tests using muffle furnace under temperature of 200, 250 and 300 degrees Celsius. The volatile matters loss besides moisture during heating process was evaluated and the experimental drying curves were matched with a mathematical model. (author)

Eco-friendly Development Of Industry

International Nuclear Information System (INIS)

An, Gi Cheol; Park, Hun; Lee, Dong Jin; Ryu, Sang Hui

1998-02-01

This book reports eco-friendly development of industry, which has summary on bring up the issue and research way and system of research. It deals with current state of affairs on eco-friendly development of industry and the case of developed countries such as necessity and meaning of eco-friendly development industry, prospect and change of the tendency, environmental issue by field in Korea like the steel industry, nonferrous metal industry, auto industry, and cement industry and general policy for eco-friendly development of industry.

Research and design of the moving system for the cobalt-60 industrial irradiator

International Nuclear Information System (INIS)

Le Minh Tuan; Tran Khac An; Cao Van Chung; Phan Phuoc Thang

2016-01-01

On the way of localization of Cobalt-60 industrial irradiators, Research and Development Center for Radiation Technology (VINAGAMMA) has successfully designed and manufactured the first version of Co-60 industrial irradiator, VINAGA1. The second version of Co-60 industrial irradiator has been studied and designed by VINAGAMMA in the frame of the scientific project No. DTCB.02/15/TTNCTK. The nucleus of a Co-60 industrial irradiator is a mechanical system inside an irradiation room namely a tote box moving system. This report presents the tote box moving system designed by VINAGAMMA. The tote box moving system contains 52 tote boxes with the dimensions of 50 cm (w) × 70 cm (l) × 150 cm (h) that are moving around the source racks in the manner of 4 passes and 2 levels. The irradiator with this tote box moving system has good specifications: The minimum time of an irradiation cycle is 1h 20 min and the dose uniformity ratio (DUR) at the product densities of 0.1 g/cm 3 and 0.5 g/cm 3 is 1.4 and 1.8, respectively. Radiation energy utilization efficiency at the product densities of 0.1 g/cm 3 and 0.5 g/cm 3 is 19.7% and 48.8%, respectively. These specifications meet the requirements for a multi-purpose Co-60 industrial irradiator and the present irradiation requirements in Vietnam. (author)

Neoadjuvant and adjuvant chemotherapy for locally advanced bladder carcinoma. Development of novel bladder preservation approach, Osaka Medical College regimen

International Nuclear Information System (INIS)

Azuma, Haruhito; Inamoto, Teruo; Takahara, Kiyoshi; Ibuki, Naokazu; Nomi, Hayahito; Yamamoto, Kazuhiro; Narumi, Yoshihumi; Ubai, Takanobu

2012-01-01

Cisplatin-based chemotherapy has been widely used in a neoadjuvant as well as adjuvant setting. Furthermore, trimodal approaches including complete transurethral resection of the bladder tumor followed by combined chemotherapy and radiation have generally been performed as bladder preservation therapy. However, none of the protocols have achieved a 5-year survival rate of more than 70%. Additionally, the toxicity of chemotherapy and/or a decreased quality of life due to urinary diversion cannot be ignored, as most patients with bladder cancer are elderly. We therefore newly developed the novel trimodal approach of ''combined therapy using balloon-occluded arterial infusion of anticancer agent and hemodialysis with concurrent radiation, which delivers an extremely high concentration of anticancer agent to the site of a tumor without systemic adverse effects (''Osaka Medical College regimen'' referred to as the OMC regimen). We initially applied the OMC regimen as neoadjuvant chemotherapy for locally advanced bladder cancer. However, since more than 85% of patients with histologically-proven urothelial cancer achieved complete response with no evidence of recurrence after a mean follow-up of 170 (range 21-814) weeks, we have been applying the OMC-regimen as a new approach for bladder sparing therapy. We summarize the advantage and/or disadvantage of chemotherapy in neoadjuvant as well as adjuvant settings, and show the details of our newly developed bladder sparing approach OMC regimen in this review. (author)

Recommendations for the safe use and regulation of radiation sources in industry, medicine, research and teaching

International Nuclear Information System (INIS)

1990-01-01

The use of radiation sources of various types and activities is widespread in industry, medicine, research and teaching, and is increasing yearly. The safety record has been admirable, although incidents have occurred where loss of control of radiation sources has given rise to unplanned exposures to workers, medical patients and members of the public, sometimes with fatal results, while in other situations exposure may not have been as low as reasonably achievable. This publication is intended as a practical aid for all concerned with operational radiation protection connected with the use of radiation sources in industry, medicine, research and teaching, from the point of view of both the user of such sources and the regulatory bodies. Refs, figs

Collaborative research between academia and industry using a large clinical trial database: a case study in Alzheimer's disease

DEFF Research Database (Denmark)

Jones, Roy; Wilkinson, David; Lopez, Oscar L

2011-01-01

Large clinical trials databases, developed over the course of a comprehensive clinical trial programme, represent an invaluable resource for clinical researchers. Data mining projects sponsored by industry that use these databases, however, are often not viewed favourably in the academic medical...... community because of concerns that commercial, rather than scientific, goals are the primary purpose of such endeavours. Thus, there are few examples of sustained collaboration between leading academic clinical researchers and industry professionals in a large-scale data mining project. We present here...

Industry evolution in developing countries : the Indonesian pulp and paper industry

NARCIS (Netherlands)

Dijk, van M.

2003-01-01

Almost all empirical research on industry evolution has been conducted on high or medium technology industries in industrialised countries. In this paper, a detailed analysis of the life cycle of Indonesia's pulp and paper industry is presented as case study to investigate industry evolution in

Beyond knowledge transfer: The social construction of autonomous academic science in university-industry agricultural biotechnology research collaborations

Science.gov (United States)

Biscotti, Dina Louise

Autonomy is a social product. Although some might view autonomy as the absence of social interference in individual action, it is in fact produced through social institutions. It enables social actors to act; it is the justification for the allocation of enormous public resources into institutions classified as "public" or "nonprofit;" it can lead to innovation; and, significantly, it is key to the public acceptance of new technologies. In this dissertation, I analyze the social construction of autonomy for academic science in U.S. university-industry agricultural biotechnology research collaborations. University-industry relationships (UIRs) are a site of concern about the influence of commercial interests on academic science. Agricultural biotechnology is a contentious technology that has prompted questions about the ecological and public health implications of genetically-modified plants and animals. It has also spurred awareness of the industrialization of agriculture and accelerating corporate control of the global food system. Through analysis of in-depth interviews with over 200 scientists and administrators from nine U.S. research universities and thirty agricultural biotechnology companies, I find that both the academy and industry have a vested interest in the social construction of the academy as an autonomous space from which claims to objective, disinterested scientific knowledge can be made. These claims influence government regulation, as well as grower and public acceptance of agricultural biotechnology products. I argue that the social production of autonomy for academic science can be observed in narratives and practices related to: (1) the framing of when, how and why academic scientists collaborate with industry, (2) the meanings ascribed to and the uses deemed appropriate for industry monies in academic research, and (3) the dissemination of research results into the public domain through publications and patents. These narratives and practices

Developing Research Skills for Undergraduate Business Students: Experiential Learning on Introduction to Personnel Administration and Industrial Relations Course

Science.gov (United States)

Figueroa, Carmen I.; González, Cándida

2014-01-01

This paper reports on research into developing research skills in human resources management of apprentices through experiential learning. The target groups were undergraduate business students registered in the Introduction to Personnel and Industrial Relations course. The research identified the appreciation level of importance and satisfaction…

Industrial initiatives in the wind industry

International Nuclear Information System (INIS)

Edworthy, J.

1992-01-01

Industrial initiatives are methods of lobbying and marketing to increase the activity, revenues, profits, and commercial viability of an industry. They may be undertaken by industry individuals or firms, industry groups, government agencies, or combinations of all these. In Canada, one example of an industrial initiative is the Canadian Wind Energy Association. Other initiatives relevant to the wind power industry include Technology Inflow Programs sponsored by External Affairs Canada, used for visiting foreign firms with the view to licensing foreign technology, and Industrial Research Assistance Programs to develop or adapt new technologies in partnership with government. The Conservation/Renewable Energy Council, Small Power Producers of Alberta, and Independent Power Producers Society of Ontario are also active in supporting wind energy initiatives. In other countries, notable initiatives for wind energy include the Danish wind turbine warranty guarantee program. The Western Wind Industry Network of Canada conducts regional lobbying. It is suggested that in Canada, more such networks are needed, as well as joint ventures with utilities and governments, and more work with the regulatory agencies, to promote wind energy

Industrial research on the quality of brake shoes meant for rolling stock

Science.gov (United States)

Popa, E.; Pascu, L.; Socalici, A.; Lascufoni, A.

2016-02-01

Brake shoes wear appears as a normal exploitation process and depends both on the braking force and on the material the shoe is made of. Brake shoes are made of molded sulfurous cast iron. The industrial research and experiments aim at determining the specific characteristics of the phosphorous cast iron (chemical and structural homogeneity, hardness) and their optimization in view of improving the quality of the brake shoes meant for the rolling stock

Association between Local Illumination and Visual Fatigue among the Research and Development Staffs of Industry

Directory of Open Access Journals (Sweden)

A.R. Mashkoori

2016-12-01

Full Text Available Abstract Aims: Work proper lighting means a safe, healthy and comfort conditions for work under a lighting system that includes qualitative and quantitative features. This study aimed to evaluate the surface local lighting of works and eye fatigue among research and development staffs of an automotive industry. Instrument & Methods: In this descriptive study in Research and Development Department of an automotive industry in 2015, 126 official staffs were selected randomly. A demographic questionnaire and the Visual Fatigue Questionnaire (Persian Version were used for data gathering. Hagner EC1 Luxmeter was used to measure the local lighting. Data were analyzed by SPSS 20 software, through descriptive statistics. Findings: The lighting in 382 stations (75.8% was improper and less than standard. The minimum and maximum intensity of light was between 22.4lux in station 2 (inventory department and 581lux in station 4 (systems and methods department. The overall intensity in more than 50% units, except the Systems and Methods Department, were less than the standard (300lux. 40.4% of the participants had severe eye fatigue, 28.6% had moderate visual fatigue, 28.6% had low visual fatigue and only 2.4% had no visual fatigue. The average of visual fatigue was 3.50±1.97. Conclusion: The workplace lighting and the eye fatigue of computer users in the Research and Development Department of the studied automotive industry are not in an acceptable condition.

Organization of industrial application of academic research on biocatalytic pre-treatment processes of cotton

NARCIS (Netherlands)

Bouwhuis, G.H. (Gerrit); Brinks, G.J. (Ger); Warmoeskerken, M.M.C.G. (Marijn)

2011-01-01

A lot of research effort is put in developing enzymatic treatment of textiles by focusing on the performance of enzymes on lab-scale. Despite all this work upgrading of these developments from lab-scale to industrial scale has not been really successful. Companies are nowadays confronted with rapid

PM-HIP research for structural and pressuring retaining applications within the electric power industry

International Nuclear Information System (INIS)

Gandy, David W.

2015-01-01

For more than 60 years now, the nuclear power industry has relied on structural and pressure retaining materials generated via established manufacturing practices such as casting, plate rolling-and-welding, forging, drawing, and/or extrusion. During the past three years, EPRI has been leading the development and introduction of another established process, powder metallurgy and hot Isostatic pressing (PM/HIP), for pressure retaining applications in electric power industry. The research includes assessment of two primary alloys: 316L stainless steel and Grade 91 creep-strength enhanced ferritic steels, for introduction into the ASME Boiler and Pressure Vessel Code. Continuing DOE and EPRI research on other structural/pressure retaining alloys such as Alloy 690, SA 508 Class 1, Alloy 625, hard-facing materials, and others are also underway. This research will have a tremendous impact as we move forward over the next few decades on the selection of new alloys and components for advanced light water reactors and small modular reactors. Furthermore, fabrication of high alloy materials/components may require the use of new manufacturing processes to achieve acceptable properties for higher temperature applications such as those in Generation IV applications. Current research by EPRI and DOE will be reviewed and emphasis will be targeted at advanced applications where PM/HIP may be applied in the future. (authors)

[Example of product development by industry and research solidarity].

Science.gov (United States)

Seki, Masayoshi

2014-01-01

When the industrial firms develop the product, the research result from research institutions is used or to reflect the ideas from users on the developed product would be significant in order to improve the product. To state the software product which developed jointly as an example to describe the adopted development technique and its result, and to consider the modality of the industry solidarity seen from the company side and joint development. The software development methods have the merit and demerit and necessary to choose the optimal development technique by the system which develops. We have been jointly developed the dose distribution browsing software. As the software development method, we adopted the prototype model. In order to display the dose distribution information, it is necessary to load four objects which are CT-Image, Structure Set, RT-Plan, and RT-Dose, are displayed in a composite manner. The prototype model which is the development technique was adopted by this joint development was optimal especially to develop the dose distribution browsing software. In a prototype model, since the detail design was created based on the program source code after the program was finally completed, there was merit on the period shortening of document written and consist in design and implementation. This software eventually opened to the public as an open source. Based on this developed prototype software, the release version of the dose distribution browsing software was developed. Developing this type of novelty software, it normally takes two to three years, but since the joint development was adopted, it shortens the development period to one year. Shortening the development period was able to hold down to the minimum development cost for a company and thus, this will be reflected to the product price. The specialists make requests on the product from user's point of view are important, but increase in specialists as professionals for product

Identifying research advancements in supply chain risk management for Agri-food Industries: Literature review

Science.gov (United States)

Septiani, W.; Astuti, P.

2017-12-01

Agri-food supply chain has different characteristics related to the raw materials it uses. Food supply chain has a high risk of damage, thus drawing a lot of attention from researchers in supply chain management. This research aimed to investigate the development of supply chain risk management research on agri-food industries. These reviews were arranged in steps systematically, ranging from searching related to the review of SCRM paper, reviewing the general framework of SCRM and the framework of agri-food SCRM. Selection of literature review papers in the period 2005-2017, and obtained 45 papers. The results of the identification research were illustrated in a supply chain risk management framework model. This provided insight toward future research directions and needs.

[Introduction of a Clinical Research Experience Program in Hospital Practical Training for Pharmacy Students and Its Evaluation].

Science.gov (United States)

Takahashi, Katsuyuki; Suda, Yasuki; Kawaguchi, Hiroshi; Nakamura, Yasutaka; Kawabata, Shiho; Kawakami, Noriko; Nishikawa, Takeshi; Nagayama, Katsuya

2015-01-01

Long-term clinical training based on a model core curriculum was conducted to nurture highly competent pharmacists in the clinical field. Pharmacists' responsibilities are expanding, and a system has been developed to help pharmacists gain accreditation, identify specialties, and improve their training. However, this system requires research competency. Therefore clinical research should be considered a part of clinical training to encourage high competency among pharmacists. Because the model core curriculum does not include a section on clinical research. Osaka City University Hospital introduced a hands-on clinical research experience program and evaluated its usefulness. A significant improvement in the level of knowledge and awareness of clinical research was seen among students who underwent the clinical research experience program. In addition, the level of student satisfaction was higher. These findings suggest that a clinical research experience program may be useful to nurture a greater awareness of clinical research and knowledge acquisition among pharmacists.

AMTEX: A university, government, industry, partnership

Energy Technology Data Exchange (ETDEWEB)

Anderson, L.J. [Auburn Univ., AL (United States); Cheatham, R.L. [Pacific Northwest Lab., Richland, WA (United States); Peskin, A.M. [Brookhaven National Lab., Upton, NY (United States)

1993-12-01

The AMTEX Partnership is a research and development collaboration between the US Department of Energy (DOE), the DOE`s multiprogram laboratories, universities, and the integrated textile industry. The integrated industry includes fibers, textiles, apparel, and other fabricated products. The goal of AMTEX is to strengthen the competitiveness of this vital industry and thereby preserve and create new jobs. AMTEX is a role model for government, industry and universities working together to achieve a specified goal. Under the oversight of the Laboratory Technology Transfer Program in DOE`s Office of Energy Research, the multiprogram laboratories, universities and industry are pursuing a broad, industry-driven research agenda. It combines the research and development capabilities of industry and universities with the unique expertise and facilities of the DOE laboratory system.

First Tuesday@CERN: Industrial partnership and innovation management at European research laboratories

CERN Multimedia

2003-01-01

On Wednesday 19 March, CERN will host for the second time the 'First Tuesday Geneva' events for entrepreneurs, investors and all those interested in new technologies. The event is organised by the non-profit group Rezonance. The theme of this "First Tuesday@CERN" is familiar to CERN, as it concerns new trends of industrial partnership and innovation management at European research laboratories. As major sources of innovative technologies, large laboratories such as CERN, ESA, EMBL or ESRF have adopted over the past few years new strategies in the areas of industrial partnership and technological spin-offs. Speakers include: - Pierre Brisson, Head of Technology Transfer and Promotion Office, ESA : "The European Space Incubator at ESA" - Gabor Lamm, Managing Director EMBL Enterprise Management Technology Transfer : "EMBL Enterprise Management: Innovation Works" - Edward Mitchell, Coordinator of the PSB, ESRF : "The Partnership for Structural Biology" - Wolfgang von Rüden, Leader of Information Tech...

Awareness and enforcement of guidelines for publishing industry-sponsored medical research among publication professionals: the Global Publication Survey.

Science.gov (United States)

Wager, Elizabeth; Woolley, Karen; Adshead, Viv; Cairns, Angela; Fullam, Josh; Gonzalez, John; Grant, Tom; Tortell, Stephanie

2014-04-19

To gather information about current practices and implementation of publication guidelines among publication professionals working in or for the pharmaceutical industry. Web-based survey publicised via email and social media to members of the International Society for Medical Publication Professionals (ISMPP) and other organisations from November 2012 to February 2013. 469 individuals involved in publishing industry-sponsored research in peer-reviewed journals, mainly working in pharmaceutical or device companies ('industry', n=144), communication agencies ('agency', n=238), contract research organisations (CRO, n=15) or as freelancers (n=34). Most respondents (78%) had worked on medical publications for ≥5 years and 62% had a PhD/MD. Over 90% of industry, agency and CRO respondents routinely refer to Good Publication Practice (GPP2) and the International Committee of Medical Journal Editors' Uniform Requirements. Most respondents (78% industry, 79% agency) received mandatory training on ethical publication practices. Over 90% of respondents' companies had publication guidelines or policies and required medical writing support to be acknowledged in publications (96% industry, 99% agency). Many industry respondents used publication management tools to monitor compliance with company guidelines and about half (46%) stated that their company had formal publication audits. Fewer agencies audited adherence to guidelines but 20% of agency respondents reported audits of employees and 6% audits of freelancers. Of concern, 37% of agency respondents reported requests from authors or sponsors that they believed were unethical, although 93% of these requests were withdrawn after respondents explained the need for compliance with guidelines. Most respondents' departments (63% industry, 58% agency, 60% CRO) had been involved in publishing studies with negative or inconclusive results. Within this sample, most publication professionals working in or for industry were aware of

Internationalization as a strategy to overcome industry barriers-An assessment of the marine energy industry

International Nuclear Information System (INIS)

Lovdal, Nicolai; Neumann, Frank

2011-01-01

Research on conditions to develop new innovations within emerging renewable energy industries is often done with a national focus. However, recent research on international entrepreneurship has revealed that firms operate on international levels very early in their life time. Thus, based on former research on international entrepreneurship and case examples, we build the propositions that firms in the marine energy industry use internationalization as a strategy to overcome industry barriers. Our primary source of data is a unique dataset from a global survey of all the companies in the marine energy industry who are aiming to commercialize a wave or tidal energy device. This paper is organized in two steps: first we identified the most challenging industry barriers perceived by companies. Second we use these to form propositions which we assess through empirical data. The two most challenging barriers perceived by the companies are need for capital and need for supportive political schemes. Our findings reveal that internationalization certainly is a common strategy to access capital and attractive support schemes in foreign countries. The early internationalization has implications for researchers, managers and policy makers. - Research highlights: → Industry barriers identified as access to capital and supportive political schemes. → International entrepreneurship is used to overcome industry barriers. → Start-ups in emerging energy industries 'shop' national support schemes. → Future research to provide policy advice should adapt to the international reality. → Research based on a worldwide survey of wave and tidal energy device developers.

Internationalization as a strategy to overcome industry barriers-An assessment of the marine energy industry

Energy Technology Data Exchange (ETDEWEB)

Lovdal, Nicolai, E-mail: nicolai.lovdal@iot.ntnu.n [Industrial Economics and Technology Management, Norwegian University of Science and Technology, 7491 Trondheim (Norway); Neumann, Frank, E-mail: frank@wave-energy-centre.or [Wave Energy Centre, Av. Manuel Maia, 36, r/c Dto., 1000-201 Lisboa (Portugal)

2011-03-15

Research on conditions to develop new innovations within emerging renewable energy industries is often done with a national focus. However, recent research on international entrepreneurship has revealed that firms operate on international levels very early in their life time. Thus, based on former research on international entrepreneurship and case examples, we build the propositions that firms in the marine energy industry use internationalization as a strategy to overcome industry barriers. Our primary source of data is a unique dataset from a global survey of all the companies in the marine energy industry who are aiming to commercialize a wave or tidal energy device. This paper is organized in two steps: first we identified the most challenging industry barriers perceived by companies. Second we use these to form propositions which we assess through empirical data. The two most challenging barriers perceived by the companies are need for capital and need for supportive political schemes. Our findings reveal that internationalization certainly is a common strategy to access capital and attractive support schemes in foreign countries. The early internationalization has implications for researchers, managers and policy makers. - Research highlights: {yields} Industry barriers identified as access to capital and supportive political schemes. {yields} International entrepreneurship is used to overcome industry barriers. {yields} Start-ups in emerging energy industries 'shop' national support schemes. {yields} Future research to provide policy advice should adapt to the international reality. {yields} Research based on a worldwide survey of wave and tidal energy device developers.

Neutralizing activities of human immunoglobulin derived from donors in Japan against mosquito-borne flaviviruses, Japanese encephalitis virus, West Nile virus, and dengue virus

Directory of Open Access Journals (Sweden)

Yunoki M

2016-07-01

Full Text Available Mikihiro Yunoki,1-3 Takeshi Kurosu,2 Ritsuko Kubota Koketsu,2,4 Kazuo Takahashi,5 Yoshinobu Okuno,4 Kazuyoshi Ikuta2,4 1Research and Development Division, Japan Blood Products Organization, Tokyo, 2Department of Virology, Research Institute for Microbial Diseases, Osaka University, Osaka, 3Pathogenic Risk Evaluation, Graduate School of Veterinary Medicine, Rakuno Gakuen University, Hokkaido, 4Research and Development Division, The Research Foundation for Microbial Diseases of Osaka University, Kagawa, 5Osaka Prefectural Institute of Public Health, Osaka, Japan Abstract: Japanese encephalitis virus (JEV, West Nile virus (WNV, and dengue virus (DenV are causal agents of Japanese encephalitis, West Nile fever, and dengue fever, respectively. JEV is considered to be indigenized and widespread in Japan, whereas WNV and DenV are not indigenized in Japan. Globulin products seem to reflect the status of the donor population according to antivirus neutralization activity. However, the anti-JEV, -WNV, and -DenV neutralization activities of globulin products derived from donors in Japan have not been clarified. Furthermore, potential candidates for the development of an effective immunotherapeutic drug for encephalitis caused by JEV, WNV, or DenV have also not been identified. Therefore, the aim of this study was to determine the overall status of the donor population in Japan based on globulin products by evaluating anti-JEV, -WNV, and -DenV neutralizing activities of intravenous immunoglobulin. Overall, intravenous immunoglobulin products showed stable neutralizing activity against JEV but showed no or only weak activity against WNV or DenV. These results suggest that the epidemiological level against WNV and DenV in the donor population of Japan is still low, suggesting that these viruses are not yet indigenized. In addition, JEV vaccinations and/or infections in the donor population do not induce a cross-reactive antibody against WNV. Keywords

Research and development of the system for group examination of lung cancer by helical CT

International Nuclear Information System (INIS)

2003-03-01

For the ultimate purpose of heavy particle therapy of lung cancer at an early stage, the system in the title with low dose radiation has been investigated by cooperation of NIRS (as a leading part) and medical/industrial facilities all over the country. The project started essentially in 1984 and has been continuing at 2003. This book described Results hitherto and Materials for application to medical care at disaster (Hanshin-Awaji Earthquake Disaster in 1995) together with reference materials. Results contain all fields of nuclear medicine and of imaging involved in examination/diagnosis of lung cancer, achieved by NIRS, by Health management center and Faculty of Medicine, Chiba University and Japan Anti-Tuberculosis Association in Chiba, by the 3rd Department of Internal Medicine, Fac. Med., Chiba Univ., by Osaka Medical Center for Cancer and Cardiovascular Diseases, by Nippon Med. School, Arakawa-ku cancer protection center and Tokyo Metropolitan Univ. of Health Sciences, by Hitachi health management center, by Fukui Med. College, by Hitachi Medical Corp., by NTT research laboratories, and by Toyohashi Univ. of Technology. The Materials involve Process and summary of conducting the medical care activities, Improvement of the examination automobile, Supplementary equipments and measures for legal problems, System for the medical care activities, Record of the examination automobile activities, Problems in future, and Completion of the medical activities. Reference materials are related with the Materials above. (N.I.)

Industry Research and Recommendations for Small Buildings and Small Portfolios

Energy Technology Data Exchange (ETDEWEB)

Langner, Rois [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hendron, Bob [National Renewable Energy Lab. (NREL), Golden, CO (United States); Pless, Shanti [National Renewable Energy Lab. (NREL), Golden, CO (United States); Huppert, Mark [National Trust for Historic Preservation, Washington, DC (United States); Cochrane, Ric [National Trust for Historic Preservation, Washington, DC (United States)

2013-12-01

Small buildings have been left behind in the energy efficiency marketplace because financial and technical resources have flowed to larger commercial buildings. DOE's Building Technologies Office works with the commercial building industry to accelerate the uptake of energy efficiency technologies and techniques in existing and new commercial buildings (DOE 2013). BTO recognizes the SBSP sector'spotential for significant energy savings and the need for investments in resources that are tailored to this sector's unique needs. The industry research and recommendations described in this report identify potential approaches and strategic priorities that BTO could explore over the next 3-5 years that will support the implementation of high-potential energy efficiency opportunities for thisimportant sector. DOE is uniquely positioned to provide national leadership, objective information, and innovative tools, technologies, and services to support cost-effective energy savings in the fragmented and complex SBSP sector. Properly deployed, the DOE effort could enhance and complement current energy efficiency approaches. Small portfolios are loosely and qualitatively defined asportfolios of buildings that include only a small number of small buildings. This distinction is important because the report targets portfolio owners and managers who generally do not have staff and other resources to track energy use and pursue energy efficiency solutions.

The National Nanotechnology Initiative: Research and Development Leading to a Revolution in Technology and Industry

Science.gov (United States)

2010-02-01

dual-use deliveries to entice commercial interest at the earliest stages. NRO transition goals aim to create commercial “ pull ” to enable rapid... GOALI ), Partnerships for Innovation (PFI) , and Industry-University Cooperative Research Centers (IUCRC) • Partnership with small businesses and large

NC-6301, a polymeric micelle rationally optimized for effective release of docetaxel, is potent but is less toxic than native docetaxel in vivo

OpenAIRE

Kano, Mitsunobu; Harada,; Iwata,; Saito,; Ishii,; Hayashi,; Yashiro,; Hirakawa,; Miyazono,Kohei; Kato,Yasuki; Kano,Mitsunobu

2012-01-01

Mitsunori Harada,1 Caname Iwata,2 Hiroyuki Saito,1 Kenta Ishii,1 Tatsuyuki Hayashi,1 Masakazu Yashiro,3 Kosei Hirakawa,3 Kohei Miyazono,2 Yasuki Kato,1 Mitsunobu R Kano21Research Division, NanoCarrier Co, Ltd, Chiba, Japan; 2Department of Molecular Pathology, Graduate School of Medicine, University of Tokyo, Tokyo, Japan; 3Department of Surgical Oncology, Osaka City University, Osaka, JapanAbstract: Drug release rate is an important factor in determining efficacy and toxicity of nanoscale dru...

Industrial Engineering : Innovative Networks - 5th International Conference on Industrial Engineering and Industrial Management

CERN Document Server

Bogataj, Marija; Ros-McDonnell, Lorenzo

2012-01-01

The Spanish Conference of Industrial Engineering /Ingeniería de Organización Industrial (CIO) is an annual meeting promoted by Asociación para el Desarrollo de la Ingeniería de Organización/ Industrial Engineers Association (ADINGOR). The aim of CIO is to establish a forum for the open and free exchange of ideas, opinions and academic experiences about research, technology transfer or successful business experiences in the field of Industrial Engineering. The Scientific Committee is composed by 68 international referees and we foresee the attendance of some 200 people from more than 15 countries and following the rotation of venue and organization between various Spanish universities, the 2011 Conference will be the fifteenth National Conference and the fifth International Conference in Cartagena.   During three days the 2011 Conference will include the participation of European and other foreign countries researchers and practitioners that will presenting communications, reproduced in this volume, on ...

Research on networked manufacturing system for reciprocating pump industry

Science.gov (United States)

Wu, Yangdong; Qi, Guoning; Xie, Qingsheng; Lu, Yujun

2005-12-01

Networked manufacturing is a trend of reciprocating pump industry. According to the enterprises' requirement, the architecture of networked manufacturing system for reciprocating pump industry was proposed, which composed of infrastructure layer, system management layer, application service layer and user layer. Its main functions included product data management, ASP service, business management, and customer relationship management, its physics framework was a multi-tier internet-based model; the concept of ASP service integration was put forward and its process model was also established. As a result, a networked manufacturing system aimed at the characteristics of reciprocating pump industry was built. By implementing this system, reciprocating pump industry can obtain a new way to fully utilize their own resources and enhance the capabilities to respond to the global market quickly.

Mapping the Use of Engineered NM in Quebec's Industries and Research Laboratories

International Nuclear Information System (INIS)

Ostiguy, Claude; Emond, Claude; Dossa, Inès; Plavski, Anton; Malki, Yasmina; Boily, Chantale; Roughley, David; Endo, Charles-Anica

2013-01-01

Engineered NanoMaterials (NM) offer an opportunity to develop a wide variety of new products with unique properties but many studies have shown potential OHS risks specific to NM. Addressing these risks requires knowledge about release of NM into the workplaces. This research aimed to map the state of nanotechnology OHS practices in Quebec through a questionnaire following a first contact by telephone when possible and by compiling the type and volumes of NM used as well as gathering information related to the working conditions and OHS aspects. This survey was conducted among 1310 Quebec industries and 653 researchers working in different specialties potentially involved in the development/production/distribution/integration of NM and use of NM containing products. Overall, 90 questionnaires, including 51 from the industries, were completed. These showed that NM are mainly used into the powder form, in many different sectors and deserve a wide range of markets. The prevention measures implemented vary widely from a workplace to another but about one third of the participants report that they have implemented NP adapted prevention measures but they remain worried on some specific operations. More than 50% of the participants request more information about the safe laboratory/plant design, toxicity, regulation, good work practices and prevention measures, efficiency of personal protective equipment and environmental impacts.

Mapping the Use of Engineered NM in Quebec's Industries and Research Laboratories

Science.gov (United States)

Ostiguy, Claude; Emond, Claude; Dossa, Inès; Malki, Yasmina; Boily, Chantale; Roughley, David; Plavski, Anton; Endo, Charles-Anica

2013-04-01

Engineered NanoMaterials (NM) offer an opportunity to develop a wide variety of new products with unique properties but many studies have shown potential OHS risks specific to NM. Addressing these risks requires knowledge about release of NM into the workplaces. This research aimed to map the state of nanotechnology OHS practices in Quebec through a questionnaire following a first contact by telephone when possible and by compiling the type and volumes of NM used as well as gathering information related to the working conditions and OHS aspects. This survey was conducted among 1310 Quebec industries and 653 researchers working in different specialties potentially involved in the development/production/distribution/integration of NM and use of NM containing products. Overall, 90 questionnaires, including 51 from the industries, were completed. These showed that NM are mainly used into the powder form, in many different sectors and deserve a wide range of markets. The prevention measures implemented vary widely from a workplace to another but about one third of the participants report that they have implemented NP adapted prevention measures but they remain worried on some specific operations. More than 50% of the participants request more information about the safe laboratory/plant design, toxicity, regulation, good work practices and prevention measures, efficiency of personal protective equipment and environmental impacts.

Empirical research on financial capability evaluation of A-share listed companies in the securities industry based on principal component analysis

Directory of Open Access Journals (Sweden)

Xiuping Wang

2017-11-01

Full Text Available Based on the relevant financial data indicators of A-share markets of Shanghai and Shenzhen in 2009, with all of 29 listed companies in the securities industry as the research objects, this paper selects 10variables that can fully reflect the financial capability indicators and uses the principal component analysis to carry out the empirical research on the financial capability. The research results show that the comprehensive financial capability of listed companies in A-share securities industry must be focused on the following four capabilities, investment and income, profit, capital composition and debt repayment and cash flow indicators. In addition, the principal component analysis can effectively evaluate the financial capability of listed companies in A-share securities industry, and solve the problems in the previous analysis methods, such as excessive indicators, information overlapping and so on.

Factors associated with the difficulty in hospital acceptance among elderly emergency patients: A population-based study in Osaka City, Japan.

Science.gov (United States)

Matsuyama, Tasuku; Kitamura, Tetsuhisa; Katayama, Yusuke; Kiyohara, Kosuke; Hayashida, Sumito; Kawamura, Takashi; Iwami, Taku; Ohta, Bon

2017-12-01

We aimed to investigate prehospital factors associated with difficulty in hospital acceptance among elderly emergency patients. We reviewed ambulance records in Osaka City from January 2013 through December 2014, and enrolled all elderly emergency patients aged ≥65 years who were transported by on-scene emergency medical service personnel to a hospital that the personnel had selected. The definition of difficulty in hospital acceptance was to the requirement for ≥4 phone calls to hospitals by emergency medical service personnel before receiving a decision from the destination hospitals. Prehospital factors associated with difficulty in hospital acceptance were examined through logistic regression analysis. During the study period, 72 105 elderly patients were included, and 13 332 patients (18.5%) experienced difficulty in hospital acceptance. In the simple linear regression model, hospital selection time increased significantly with an increasing number of phone calls (R 2  = 0.774). In the multivariable analysis, older age (P for trend emergency-related symptoms and difficulty in hospital acceptance among elderly patients with symptoms of internal disease (AOR 1.71, 95% CI 1.53-1.91). In Japan, which has a rapidly aging population, a comprehensive strategy for elderly emergency patients, especially for advanced age groups or nursing home residents, is required. Geriatr Gerontol Int 2017; 17: 2441-2448. © 2017 Japan Geriatrics Society.

Planning research on the next strategical project through the trend analysis on radiation fusion technology, industry and policy

International Nuclear Information System (INIS)

Kim, Dong Sub; Choi, Jae Hak; Kim, Tak Hyun

2013-01-01

Ο The planning research for establish a detailed implementation strategy to serve as small, but a strong institution leading national radiation research and resolving the pending issues related to using radiation - Now is a time when it needs a implementation strategy to achieve it's unique mission as the sole radiation-specialized research institute leading to promote the radiation industry. Ο The main background of this study is to build the planning of a new paradigm for research and development to cope with the changing domestic and international environment for sustainable growth - As the domestic regional radiation field is getting more competitive and the cooperative group expands, it needs to adapt to the global trend such as technology convergence and acceleration etc.. - The need for establish basic database to make a new strategy in order to narrow the technology gap in the radiation fusion technology comparing to the developed country and cope with emerging country's advancement in technology Ο The use to build basic database to spearhead the project and set aside a budget effectively - It's to be used as a reference to set aside a budget through planning strategy industry field to forecast the industrial demand and variation of the future policy and create blue ocean and niche markets

Business analysis methodology in telecommunication industry – the research based on the grounded theory

Directory of Open Access Journals (Sweden)

Hana Nenickova

2013-10-01

Full Text Available The objective of this article is to present the grounded theory using in the qualitative research as a basis to build a business analysis methodology for the implementation of information systems in telecommunication enterprises in Czech Republic. In the preparation of the methodology I have used the current needs of telecommunications companies, which are characterized mainly by high dependence on information systems. Besides that, this industry is characterized by high flexibility and competition and compressing of the corporate strategy timeline. The grounded theory of business analysis defines the specifics of the telecommunications industry, focusing on the very specific description of the procedure for collecting the business requirements and following the business strategy.

TRENDS IN A SOUTH AFRICAN INDUSTRIAL ENGINEERING RESEARCH JOURNAL: A TEXTUAL INFORMATION ANALYSIS PERSPECTIVE

Directory of Open Access Journals (Sweden)

J.W. Uys

2012-01-01

Full Text Available

ENGLISH ABSTRACT: Industrial engineering (IE is a multi-disciplinary field, with its research borders broadening into a wide range of sub-disciplines. The South African Journal of Industrial Engineering (SAJIE has been the official voice of IE research in South Africa for the past 22 years. In the interests of evaluating research scope, it is worth determining how IE fields have been covered by this journal. What are the current topics in IE, and how do they align with IE publication trends in other countries? This article attempts to investigate these issues in an objective way by using a text analytical technique to analyse the SAJIE publication collection. Due to the growth in the quantity of accessible textual information, and the growing importance of this type of information to business people and industrial engineers alike, the relevant text analytical method is also outlined.

AFRIKAANSE OPSOMMING: Bedryfsingenieurswese is ’n multidissiplinêre veld, met navorsingsgrense wat strek oor ’n wye reeks sub-dissiplines. Die Suid-Afrikaanse Tydskrif vir Bedryfsingenieurswese (SAJIE was oor die afgelope 22 jaar die amptelike mondstuk vir bedryfsingenieurswese-gerigte navorsing in Suid-Afrika. Dit is betekenisvol om te bepaal in watter hoedanigheid bedryfsingenieurswesevelde deur die SAJIE gedek word, ten einde die bestek van navorsing te evalueer. Wat is die huidige temas van bedryfsingenieurswese, en hoe vergelyk dit met bedryfsingenieurswese-publikasieneigings in ander lande? Hierdie artikel poog om die vraagstuk op ’n objektiewe wyse na te vors deur die toepassing van ’n teksanalitiese tegniek om die SAJIE publikasie versameling te ontleed. Weens die toename in die hoeveelheid beskikbare tekstuele inligting, asook die toenemende belang van hierdie tipe inligting vir besigheidspersone asook bedryfsingenieurs, word die betrokke teksanalitiese metode ook bespreek.

Report on the actual state of the basic, applied research and industrial applications of the radiation in Mexico

International Nuclear Information System (INIS)

Lopez V, H.

1991-07-01

In this report the main works of basic, applied research and industrial applications that are carried out in Mexico, about radiations (radiation chemistry, technology, applications, use and isotope production, etc.): infrastructure, radiation sources, groups and research programs are presented. (Author)