WorldWideScience

Sample records for industrial grits em

  1. Uso do resíduo industrial grits em pavimentos de estradas florestais: influência do período de cura na resistência mecânica e expansão de misturas solo-grits compactadas Use of industrial grits in forest road pavements: influence of curing times on the mechanical strength and swelling of compacted soil-grits mixtures

    Directory of Open Access Journals (Sweden)

    Reginaldo Sérgio Pereira

    2006-10-01

    Full Text Available Analisou-se a influência do teor de estabilizante, da energia de compactação e do período de cura na resistência mecânica e expansão de dois solos da Zona da Mata Norte de Minas Gerais. As amostras de solos residuais de gnaisse coletadas na cidade de Viçosa, MG, Brasil, respectivamente, de texturas argilo-areno-siltosa e areno-argilo-siltosa, foram denominadas solos 1 e 2. Empregou-se como estabilizante químico o resíduo "grits" fornecido pela empresa de Celulose Nipo Brasileira (CENIBRA; os teores, em massa, de 4, 8, 12, 16, 20, 24 e 28% desse resíduo foram utilizados nas misturas solo-"grits". Corpos-de-prova das misturas solo-"grits" foram compactados nos teores ótimos de umidade relativos às energias de compactação dos ensaios Proctor intermediário e modificado e curados por 0, 7, 28 e 90 dias. Avaliou-se a resistência mecânica dos solos e misturas através dos seguintes parâmetros: (a índice de suporte Califórnia (ISC ou CBR, resistência à compressão não confinada (RCNC e resistência à tração em compressão diametral (Rt. Os resultados permitiram concluir que todos os parâmetros considerados na análise influenciaram, significativamente, a resistência mecânica das misturas solo-"grits", sendo o comportamento das misturas solo 1-"grits" influenciado, também, pelo teor de sódio presente na constituição química do "grits".This paper addresses the influence of stabilizer content, compaction effort and curing time on the mechanical strength and swelling of two soils from the "Zona da Mata Norte" region, State of Minas Gerais, Brazil. Two residual gneiss soils from the municipality of Viçosa, Brazil, silt-sand-clay and silt-clay-sandy soils named soils 1 and 2, respectively, were used in this study. Industrial grits provided by Celulose Nipo Brasileira - CENIBRA was used as stabilizer, with contents ranging from 4 to 28 % regarding soil dry mass. Specimens of soil-grits mixtures were compacted at the

  2. Aplicações de misturas solo-"grits" em estradas florestais: resistência mecânica via CBR Application of soil-grits mixtures in forest roads: mechanical strength via CBR test

    Directory of Open Access Journals (Sweden)

    Reginaldo Sérgio Pereira

    2006-08-01

    Full Text Available Analisaram-se as potencialidades de emprego do resíduo sólido industrial "grits", oriundo da indústria de celulose, como agente estabilizante de dois solos da Zona da Mata Norte de Minas Gerais, Brasil, para fins de emprego em estradas florestais. Os solos estudados englobaram um residual maduro, de textura argilo-areno-siltosa, e um residual jovem, de textura areno-silto-argilosa. Para tanto, prepararam-se misturas envolvendo solos e o resíduo nos quantitativos de 4, 8, 12, 16, 20, 24 e 28% em relação às massas de solo seco. Fez-se uso do ensaio CBR para avaliar as características de resistência e expansão das misturas. A avaliação dos resultados do estudo permite concluir que o resíduo "grits" apresentou potencial significativo como estabilizante dos solos, observando-se que: (i a adição de "grits" aos solos foi responsável por ganhos nas suas resistências mecânicas, obtendo-se melhores resultados com o solo de textura areno-silto-argilosa; (ii com relação à expansão medida no ensaio CBR, observaram-se pequenos acréscimos para o solo de textura argilo-areno-siltosa e decréscimos para o solo de textura areno-silto-argilosa, com aumentos no teor de "grits"; e (iii as misturas solo-"grits" não responderam bem ao aumento da energia de compactação, quanto aos parâmetros CBR e expansãoCBR.This paper is directed to forest road engineering applications, and address the potentialities of using an industrial solid waste from the cellulose industry, named grits, in the stabilization process of two soils from Zona da Mata Norte of Minas Gerais States, Brazil. Soil types tested comprised a mature residual silty-sandy-clay and a young residual clayey-silty-sand. Soil-grits mixtures were prepared at 4, 8, 12, 16, 20, 24 and 28 % stabilizer contents referred to soil dry masses. Mechanical strength and swelling parameters were determined by CBR (California Bearing Ratio tests. The laboratory testing program data supported that

  3. Influência do tratamento térmico do resíduo sólido industrial (Grits na resistência mecânica de um latossolo para pavimentos de estradas florestais Influence of the thermal treatment of industrial solid residue (Grits on the mechanical resistance of a latosol for forest engineering roads

    Directory of Open Access Journals (Sweden)

    Carlos Cardoso Machado

    2003-08-01

    Full Text Available Em estudos que envolvem o tratamento de solos com aditivos químicos com fins rodoviários, merecem especial importância aquelas pesquisas orientadas no sentido de descobrir novos meios de torná-los mais econômicos e, ao mesmo tempo, mais resistentes. No presente trabalho, o resíduo sólido industrial Grits, oriundo do processo de fabricação de papel e celulose, foi aplicado a um latossolo denominado ETA, característico da microrregião de Viçosa, Minas Gerais, Brasil, com o intuito de melhorar suas características mecânicas para sua aplicação em pavimentos de estradas florestais. O Grits, após receber tratamento térmico a 200, 300, 400, 500 e 600 ºC, em mufla, foi misturado no teor de 10%, em peso, ao solo anteriormente citado. Parâmetros geotécnicos, característicos dos ensaios de compactação e resistência à compressão simples, foram utilizados para avaliar o efeito do tratamento térmico nas misturas solo+10% Grits. Os resultados indicaram que o Grits tem potencial para estabilização de solos de pavimentos de estradas florestais, sendo o melhor resultado alcançado para o Grits tratado a 600 ºC, pois houve ganhos de resistência mecânica.Road engineering studies involving chemical stabilization of soils deserve special recognition mainly those directed to lowering the costs of forest engineering roads. This work focuses on soil stabilization of a characteristic Latosol from Viçosa, Minas Gerais, Brazil, herein named ETA, using a residue from paper and cellulose industry production, herein called Grits. Grits content of 10% related to soil dry weight was used throughout the study after residue thermal treatment using a furnace at 200, 300, 400, 500 and 600 ºC. Geotechnical standard parameters from compaction and unconfined compression tests were used to evaluate the effect of thermal treatment on the mechanical response of soil-Grits mixtures. Unconfined compression testing data show that Grits is a promising soil

  4. Characterization and evaluation of residue 'grits' of the cellulose industry

    International Nuclear Information System (INIS)

    Destefani, A.Z.; Santos, M.M.; Holanda, J.N.F.

    2010-01-01

    The cellulose industry generates huge amounts of solid waste residue called 'grits'. These wastes have been willing over time in landfills near the mills. However, this type of disposal is not environmentally friendly and can cause degradation and environmental pollution. In addition, environmental legislation increasingly severe and the high costs of landfill have led the search for new alternatives for final disposition of this abundant waste. In this context, this study is to characterize waste grits, generated by the cellulose industry in the region of Aracruz-ES. The residue samples were characterized in terms of chemical composition, X-ray diffraction, particle size distribution and thermal analysis (DTA and TGA). The characterization of the residual 'grits' demonstrated its potential as a feedstock for production of soil-cement bricks. (author)

  5. Caracterização tecnológica de misturas solo-grits para pavimentos de estradas florestais: influência do tratamento térmico do grits na resistência mecânica das misturas Technological characterization of soil-grits mixtures for forest road pavements: influence of grits thermal treatment on the mechanical strength of mixtures

    Directory of Open Access Journals (Sweden)

    Carlos Cardoso Machado

    2007-01-01

    Full Text Available Analisou-se a influência do tratamento térmico do resíduo grits na resistência mecânica de misturas solo-grits para aplicações em pavimentos de estradas florestais. O programa de ensaios de laboratório englobou: (i dois solos residuais de gnaisse da Zona da Mata Norte de Minas Gerais; (ii um resíduo da indústria da celulose denominado grits, que é composto de cal não-hidratada e areia, entre outros produtos; (iii amostras de grits submetidas ao tratamento térmico em mufla sob temperaturas de 600, 700, 800 e 900 ºC antes da moldagem dos corpos-de-prova das misturas solo-grits; (iv corpos-de-prova das misturas preparadas com o grits tratado termicamente, com 24% de grits em relação ao peso seco dos solos, compactados nas energias dos ensaios Proctor intermediário e modificado e curados por 7 e 28 dias em câmara úmida, sob condições de aproximadamente 22 ºC de temperatura e 100% de umidade relativa do ar; e (v imersão completa dos corpos-de-prova das misturas solo-grits em água, pelo período de quatro horas, antes da determinação de suas resistências em ensaios de compressão não-confinada. Os resultados do programa de ensaios de laboratório indicaram que o tratamento térmico produziu amostras de grits mais reativas, podendo-se associar melhor desempenho mecânico às temperaturas de 800 e 900 ºC para o solo 1 e 800 ºC para o solo 2.The objective of this paper was to analyze the influence of grits thermal treatment on the mechanical strength of soil-grits mixtures. The laboratory testing program included: (i two residual gneiss soils from the Zona da Mata, Northern Minas Gerais; (ii waste from the cellulose industry, namely grits, composed by non-hydrated lime and sand, among others by-products; (iii grits samples submitted to thermal treatment in a muffle at the temperatures of 600, 700, 800 and 900 ºC before soils-grits specimens preparation; (iv soils-grits specimens containing 24% of treated grits in relation

  6. MONITORAMENTO DE FUNGOS EM MILHO EM GRÃO, GRITS E FUBÁ

    Directory of Open Access Journals (Sweden)

    MÁRCIA B.A.

    1998-01-01

    Full Text Available O conhecimento de como a qualidade sanitária da matéria-prima afeta a qualidade dos seus subprodutos é muito importante para a indústria e para o consumidor. Para tanto foram analisadas 81 amostras de milho em grão, 81 de grits (canjica e 81 de fubá coletadas semanalmente antes e após o processamento, durante aproximadamente 4 meses, para determinar a contaminação interna dos grãos por fungos. Os grãos destas amostras foram lavados externamente com uma solução de hipoclorito de sódio à 2% e semeados em dois meios de cultura, Ágar Batata Dextrose e Ágar Suco de Tomate. O fubá não sofreu lavagem sendo colocado pequenas porções diretamente sobre os meios de cultura. Após a incubação à 25° C durante 4 a 7 dias, os fungos foram contados e identificados. Os fungos encontrados pertenciam aos gêneros Aspergillus, Fusarium, Penicillium, Mucor e Rhizopus. Amostras de fubá apresentaram a maior porcentagem de infecção fúngica, provavelmente originada da matéria prima e/ou das condições de processamento e/ou armazenamento do mesmo. Os fungos isolados das amostras de milho em grão, grits e fubá estão normalmente presentes em produtos e subprodutos armazenados, e alguns deles podem ser toxigênicos e vir a causar sérios problemas à saúde humana.

  7. Influência da imersão em água na resistência mecânica de misturas solo-grits compactadas e curadas com vistas a aplicações em estradas florestais Influence of water submersion on the mechanical strength of compacted and cured soil-grits mixtures for forest roads applications

    Directory of Open Access Journals (Sweden)

    Reginaldo Sérgio Pereira

    2007-01-01

    Full Text Available Avaliou-se o efeito da imersão em água dos corpos-de-prova sobre a resistência mecânica de misturas solo-grits. Trabalhou-se com dois solos da cidade de Viçosa, localizada na Zona da Mata Norte de Minas Gerais, Brasil, respectivamente de texturas predominantemente argilosa e arenosa e com o resíduo sólido industrial grits, um subproduto da indústria de celulose. Determinaram-se os parâmetros de resistência mecânica California Bearing Ratio (CBR e Resistência à Compressão Não-Confinada (RCNC de corpos-de-prova compactados nas energias de compactação referentes aos ensaios Proctor intermediário e Proctor modificado, com teores de grits na faixa de 4 a 28% e períodos de cura de 0, 7 e 28 dias. Com relação ao parâmetro CBR, os ensaios foram realizados segundo a metodologia tradicional (imersão em água dos corpos-de-prova por 96 horas e sem a imersão em água, visando determinar possíveis perdas na capacidade-suporte das misturas. No que tange ao parâmetro compressão não-confinada, os ensaios foram realizados em obediência à norma brasileira para misturas solo-cimento (imersão em água durante quatro horas antes da ruptura dos corpos-de-prova e sem a fase de imersão em água. Os resultados indicaram que a imersão em água dos corpos-de-prova influenciou significativamente a resistência mecânica das misturas solo-grits, que foram dependentes do tipo de ensaio empregado, tipo de solo, teor de grits, energia de compactação e período de cura.This paper address the influence of water submersion on mechanical strength parameters of soil-grits specimens. Two residual soils, predominantly clayey and sandy soils from the city of Viçosa, located in the State of Minas Gerais, "Zona da Mata Norte", Brazil, and waste from cellulose industry were used in the study. The laboratory testing program consisted of CBR (California Bearing Ratio and UCS (Unconfined Compression Strength of specimens prepared with waste contents

  8. Characterization and evaluation of residue 'grits' of the cellulose industry; Caracterizacao e avaliacao do resisduo 'grits' da industria de celulose

    Energy Technology Data Exchange (ETDEWEB)

    Destefani, A.Z.; Santos, M.M.; Holanda, J.N.F. [Universidade Estadual do Norte Fluminense Darcy Ribeiro (LAMAV/CCT/UENF), Campos dos Goytacazes, RJ (Brazil). Lab. de Materiais Avancados

    2010-07-01

    The cellulose industry generates huge amounts of solid waste residue called 'grits'. These wastes have been willing over time in landfills near the mills. However, this type of disposal is not environmentally friendly and can cause degradation and environmental pollution. In addition, environmental legislation increasingly severe and the high costs of landfill have led the search for new alternatives for final disposition of this abundant waste. In this context, this study is to characterize waste grits, generated by the cellulose industry in the region of Aracruz-ES. The residue samples were characterized in terms of chemical composition, X-ray diffraction, particle size distribution and thermal analysis (DTA and TGA). The characterization of the residual 'grits' demonstrated its potential as a feedstock for production of soil-cement bricks. (author)

  9. MONITORAMENTO DE FUNGOS EM MILHO EM GRÃO, GRITS E FUBÁ

    OpenAIRE

    MÁRCIA, B.A.; LÁZZARI, F.A.

    1998-01-01

    O conhecimento de como a qualidade sanitária da matéria-prima afeta a qualidade dos seus subprodutos é muito importante para a indústria e para o consumidor. Para tanto foram analisadas 81 amostras de milho em grão, 81 de grits (canjica) e 81 de fubá coletadas semanalmente antes e após o processamento, durante aproximadamente 4 meses, para determinar a contaminação interna dos grãos por fungos. Os grãos destas amostras foram lavados externamente com uma solução de hipoclorito de sódio à 2% e ...

  10. Uso de resíduos em pavimentos de estradas florestais: caracterização de solos e misturas solo-grits Application of waste in forest road pavements: characterization of soils and soil-grits mixtures

    Directory of Open Access Journals (Sweden)

    Reginaldo Sérgio Pereira

    2006-08-01

    Full Text Available Este artigo aborda uma etapa preliminar de um estudo direcionado às propriedades de engenharia de misturas de solos e aditivos químicos, para fins de aplicação em estradas florestais. Trabalhou-se com amostras de dois solos da Zona da Mata Norte de Minas Gerais, Brasil, de texturas arenosa e argilosa, estabilizadas com o resíduo industrial denominado "grits" proveniente de indústria de celulose. Foram realizados ensaios geotécnicos nos solos e nas misturas solo-aditivo químico, como se segue: análise granulométrica, peso específico dos sólidos, limites de Atterberg e compactação. Os resultados encontrados dos ensaios de laboratório revelaram que o resíduo apresentou bom desempenho como agente estabilizante, alterando significativamente a plasticidade e os parâmetros de compactação dos solos analisados.This paper addresses data from a research program in development on engineering properties of soil-chemical stabilizer mixtures for forest road application. Soil samples from sandy and clayey soils from the Zona da Mata Norte of Minas Gerais, Brazil, stabilized with grits (waste from cellulose industries were used throughout the study. The laboratory-testing program comprised the following geotechnical tests: sieve analysis, density of solid particles, Atterberg limits and compaction. Data supported the good behavior of waste as stabilizer agent changing significantly soil plasticity and compaction parameters.

  11. Comportamento geotécnico de misturas granulométricas de solo-grits Mechanical behavior of the differents soil-grits granulometrics mixtures

    Directory of Open Access Journals (Sweden)

    Carlos Cardoso Machado

    2009-06-01

    Full Text Available Neste artigo, analisa-se a influência das diversas frações granulométricas do resíduo grits nos parâmetros ótimos de compactação, resistência mecânica e expansão, quando em misturas com dois solos típicos da Zona da Mata Norte de Minas Gerais, Brasil, com fins de aplicação em estradas florestais. Os teores de resíduo empregados nas misturas foram de 4, 8, 12, 16, 20, 24 e 28%, em relação à massa seca de solos, trabalhando-se com as energias de compactação dos ensaios Proctor intermediário e modificado. As frações de resíduo estudadas foram as equivalentes à argila e silte (d This paper addresses the influence of size distribution of the industrial waste named grits on the optimum compaction parameters, mechanical strength and swelling of two typical soils from the North Forest Zone of Minas Gerais State, Brazil, for forest road applications. Specimens compacted at the intermediate and modified Proctor compaction effort and waste contents of 4, 8, 12, 16, 20, 24 and 28 % regarding soil dry unit weights were used throughout the study. Waste sizes analyzed in the laboratory testing program were those equivalent to clay (d 2 mm and gravel (2 mm < d < 76 mm sizes in accordance to the DNIT technical standard (DNIT, 1996. Soils and mixtures bearing capacity and swelling were evaluated by the CBR test. Data from the laboratory testing program support that the waste's clay and gravel size portions were responsible, respectively, for higher and lower increases in soils bearing capacity.

  12. Rendimento e composição química de cultivares de milho em moagem a seco e produção de grits Yield and chemical composition of corn cultivate in dry-milling and grits production

    Directory of Open Access Journals (Sweden)

    Rogério Amaro Gonçalves

    2003-06-01

    Full Text Available O milho é uma das principais matérias-primas para a indústria de alimentos. Desse cereal, é possível obter óleo, fubá, canjica, grits, farelo, amido e zeína. Conduziu-se este trabalho com o objetivo de avaliar o rendimento de moagem a seco, produção de grits e composição química de 16 cultivares de milho. Os grãos de milho das 16 cultivares avaliadas tiveram a sua umidade padronizada para 12% e foram submetidos a um processo de limpeza em uma mesa gravimétrica. Encerrada a etapa de limpeza, foram colocados 10 kg de grãos de cada cultivar em degerminador de facas com rotação de 600 rpm por um período de 10 minutos. Após a degerminação, o endosperma foi passado por moinho de rolos corrugados com distância entre rolos de 30 mm. O material moído foi submetido à tamisação em peneiras de 14, 20, 25 e 30 mesh por um período de 10 minutos. Para a degerminação, o delineamento experimental utilizado foi o inteiramente casualizado, com um fator de 16 cultivares e 2 repetições. Na tamisação, o delineamento usado foi com dois fatores: 16 cultivares, 5 peneiras e 2 repetições. A cultivar BR-106, o híbrido duplo BRS-2114 e o híbrido triplo BR-3123 registraram maiores rendimentos (PMaize is one of the major source of energetic an nutritious ingredient for the food industry. From the maize grain it is possible to get oil, meal, grits, bran, starch, zein. The objectives of this research was to evaluate the dry-miling yield and chemical composition of different experimental maize genotypes. Fourteen genotypes came from the breeding program of Embrapa Corn and Sorghum Researcher Center and two came from commercial companies. The grain moisture content of all cultivars were equilibrated at 12% and dust was removed in a gravimetric board, before processing. Grain samples of each type was placed in a blade degermer at 600 rpm rotation speed for 10 minutes. The endosperm portion, after degermination, was transferred to a mill roll

  13. Reduction of fumonisin B₁ in corn grits by twin-screw extrusion.

    Science.gov (United States)

    Jackson, Lauren S; Jablonski, Joseph; Bullerman, Lloyd B; Bianchini, Andreia; Hanna, Milford A; Voss, Kenneth A; Hollub, April D; Ryu, Dojin

    2011-08-01

    This study was designed to investigate the fate of fumonisins in flaking corn grits during twin-screw extrusion by measuring fumonisin B₁ (FB₁) and its analogs with a mass balance approach. Food grade corn grits and 2 batches of grits contaminated with FB₁ at 10 and 50 μg/g by Fusarium verticillioides M-2552 were processed with or without glucose supplementation (10%, w/w) with a twin-screw extruder. Extrusion reduced FB₁ in contaminated grits by 64% to 72% without glucose and 89% to 94% with added glucose. In addition, extrusion alone resulted in 26% to 73% reduction in the levels of fumonisin B₂ and fumonisin B₃, while levels of both mycotoxins were reduced by >89% in extruded corn grits containing 10% glucose. Mass balance analysis showed that 38% to 46% of the FB₁ species detected in corn extruded with glucose was N-(deoxy-D-fructos-1-yl)-FB₁, while 23% to 37% of FB₁ species detected in extruded corn grits with and without added glucose was bound to the matrix. It was also found that the hydrolyzed form of FB₁ was a minor species in extruded corn grits with or without added glucose, representing fumonisin analogues measured in this study. Research is needed to identify the reaction products resulting from extrusion processing of fumonisin-contaminated corn products. Twin-screw extrusion is widely used in food industry for its versatility. This technology may reduce the level of fumonisins in corn particularly with added glucose. Journal of Food Science © 2011 Institute of Food Technologists® No claim to original US government works.

  14. Colour characteristics of winter wheat grits of different grain size

    Directory of Open Access Journals (Sweden)

    Horváth Zs. H.

    2015-01-01

    Full Text Available Nowadays, wheat has spread all over the world due to its extensive usability. The colour of wheat grits is very important for the milling and baking industry because it determines the colour of the products made from it. The instrumental colour measuring is used, first of all, for durum wheat. We investigated the relationship between colour characteristics and grain size in the case of different hard aestivum wheats. We determined the colour using the CIE (Commission Internationale de l’Eclairage 1976 L*, a*, b* colour system measured by MINOLTA CR-300 tristimulus colorimeter. After screening the colour of the wheat fractions of different grain size, grits was measured wet and dry. We determined the L*, a*, b* colour co-ordinates and the whiteness index, too. To evaluate the values we had obtained, we used analysis of variance and regression analysis. We pointed out that the colour of wheat grits of different grain size is dependent on the hardness index of wheat. The lightness co-ordinate (L* of grits of the harder wheat is smaller, while a* and b* co-ordinates are higher. We also found that while grain size rises, the L* co-ordinate decreases and a*, b* values increase in the case of every type of wheat. The colour of grits is determined by the colour of fractions of 250-400 μm in size, independently from the average grain size. The whiteness index and the L* colour co-ordinate have a linear relation (R2 = 0.9151; so, the determination of whiteness index is not necessary. The L* value right characterizes the whiteness of grits.

  15. Grit: An important characteristic in learners.

    Science.gov (United States)

    Hammond, Drayton A

    Grit, or the perseverance and passion for long-term goals, has been associated with successful pursuits in academics, competitions, and professions outside of pharmacy. The fortitude needed to withstand tremendous physical, mental, and emotional stressors may be better predicted by grit than other factors. In those who demonstrate grit, a combination of factors may reflect academic achievement. It appears that achievement results when talent and effort are combined, with particular attention being paid to effort, as it is a function of the direction, duration, and intensity of a person's actions toward a goal. It appears that grit may be a good discriminating factor when evaluating individuals in other professions. The objective of this short commentary is to provide an introduction to the non-pharmacy literature surrounding grit and to suggest its applications in pharmacy. Copyright © 2016 Elsevier Inc. All rights reserved.

  16. Durabilidade de solos estabilizados quimicamente com vistas á aplicação em estradas florestais Durability of chemically stabilized soils for forest road applications

    Directory of Open Access Journals (Sweden)

    Carlos Cardoso Machado

    2006-12-01

    Full Text Available Este artigo é direcionado à caracterização do parâmetro durabilidade de dois solos típicos da microrregião de Viçosa, Minas Gerais, para fins de aplicação em estradas florestais, considerando-se, para tanto, as seguintes condições: (a solos estabilizados com o resíduo industrial "grits"; (b solos melhorados com cal ou cimento; e (c solos estabilizados com grits e melhorados com cal ou cimento, a partir de resultados de ensaios de durabilidade por molhagem e secagem. Trabalhou-se com um solo residual maduro (solo 1 e um solo residual jovem de gnaisse (solo 2 da Zona da Mata Norte de Minas Gerais, Brasil. O programa de ensaios de laboratório envolveu: (a teor de grits: 24% calculado em relação ao peso de solo seco; (b teor de cal ou cimento: 10 e 20%, calculados em relação ao peso de grits seco; (c energias de compactação: referentes aos ensaios Proctor normal e modificado; e (d período de cura: sete dias em câmara úmida. Os resultados do programa de ensaios indicaram que: (a as misturas solo-cal, solo-cimento, solo-grits-cal e solo-grits-cimento, em ambas as energias empregadas, resistiram a todos os ciclos do ensaio de durabilidade por molhagem e secagem; (b a mistura solo 1 + grits + cal apresentou o melhor resultado, quando compactada na energia modificada, com perdas da ordem de 7%; com relação ao solo 2, o melhor resultado foi obtido quando se trabalhou com grits mais cimento, na energia modificada, com perdas da ordem de 9%; e (c sob o aspecto durabilidade, as misturas solo-grits só apresentam potencial para emprego como material de construção rodoviária quando melhoradas com cal ou cimento.This paper addresses the assessment of the durability properties of mixtures of two soils using laboratory wetting and drying durability tests for forest road applications, as follows: (a soils stabilization with the industrial waste grits; (b soil improvement using lime or cement; (c soil stabilization using grits, and soil

  17. Liquid abrasive grit blasting literature search and decontamination scoping tests report

    International Nuclear Information System (INIS)

    Ferguson, R.L.

    1993-10-01

    Past decontamination and solvent recovery activities at the Idaho Chemical Processing Plant (ICPP) have resulted in the accumulation of 1.5 million gallons of radioactively contaminated sodium-bearing liquid waste. Future decontamination activities at the ICPP could result in the production of 5 million gallons or more of sodium-bearing waste using the current decontamination techniques of chemical/water flushes and steam jet cleaning. With the curtailment of reprocessing at the ICPP, the focus of decontamination is shifting from maintenance for continued operation of the facilities to decommissioning. As decommissioning plans are developed, new decontamination methods must be used which result in higher decontamination factors and generate lower amounts of sodium-bearing secondary waste. The primary initiative of the WINCO Decontamination Development Program is the development of methods to eliminate/minimize the use of sodium-bearing decontamination chemicals. One method that was chosen for cold scoping studies during FY-93 was abrasive grit blasting. Abrasive grit blasting has been used in many industries and a vast amount of research and development has already been conducted. However, new grits, process improvements and ICPP applicability was investigated. This evaluation report is a summary of the research efforts and scoping tests using the liquid abrasive grit blasting decontamination technique. The purpose of these scoping tests was to determine the effectiveness of three different abrasive grits: plastic beads, glass beads and alumina oxide

  18. Grit and the brain: spontaneous activity of the dorsomedial prefrontal cortex mediates the relationship between the trait grit and academic performance

    Science.gov (United States)

    Zhou, Ming; Chen, Taolin; Yang, Xun; Chen, Guangxiang; Wang, Meiyun; Gong, Qiyong

    2017-01-01

    Abstract As a personality trait, grit involves the tendency to strive to achieve long-term goals with continual passion and perseverance and plays an extremely crucial role in personal achievement. However, the neural mechanisms of grit remain largely unknown. In this study, we aimed to explore the association between grit and the fractional amplitude of low-frequency fluctuations (fALFF) in 217 healthy adolescent students using resting-state functional magnetic resonance imaging (RS-fMRI). We found that an individual’s grit was negatively related to the regional fALFF in the right dorsomedial prefrontal cortex (DMPFC), which is involved in self-regulation, planning, goal setting and maintenance, and counterfactual thinking for reflecting on past failures. The results persisted even after the effects of general intelligence and the ‘big five’ personality traits were adjusted for. More importantly, the fALFF of the right DMPFC played a mediating role in the association between grit and academic performance. Overall, these findings reveal regional fALFF as a neural basis of grit and highlight the right DMPFC as a neural link between grit and academic performance. PMID:27672175

  19. Avaliação experimental de blocos prensados de solo-cimento com adição de grits

    Directory of Open Access Journals (Sweden)

    Márcia Lana Pinheiro

    Full Text Available A produção de resíduos pelas indústrias de papel e celulose vem crescendo continuamente, gerando custos com estocagem e aumentando os impactos ambientais. O presente trabalho teve como objetivo estudar a viabilidade de incorporação do resíduo grits, oriundo dessas indústrias, na fabricação de blocos prensados de encaixe de solo-cimento, como um novo material de construção. Foi verificada a maior quantidade de resíduo possível de ser utilizada, respeitando-se as exigências normativas. Para tanto, realizou-se caracterização física e mecânica de diversas proporções de solo-grits e foram fabricados blocos com as proporções investigadas. Após a cura, foram realizados, além de outros, os ensaios de resistência à compressão e absorção de água. Em relação à caracterização física, constatou-se que todos os teores de solo-grits atenderam às exigências normativas. Com relação à resistência à compressão e absorção de água, tem-se que as percentagens com plasticidade suficiente para fabricar os blocos também atenderam às exigências normativas. A porcentagem em massa de 37,5-62,5 de solo-grits pode ser definida como o teor que utiliza a maior quantidade de resíduo e tem plasticidade mínima necessária para a fabricação de blocos. Portanto, o uso do grits na produção de blocos de solo-cimento surge como uma tecnologia viável, além de minimizar a degradação ambiental.

  20. Glycaemic Response to Quality Protein Maize Grits

    Directory of Open Access Journals (Sweden)

    Leonora N. Panlasigui

    2010-01-01

    Full Text Available Background. Carbohydrates have varied rates of digestion and absorption that induces different hormonal and metabolic responses in the body. Given the abundance of carbohydrate sources in the Philippines, the determination of the glycaemic index (GI of local foods may prove beneficial in promoting health and decreasing the risk of diabetes in the country. Methods. The GI of Quality Protein Maize (QPM grits, milled rice, and the mixture of these two food items were determined in ten female subjects. Using a randomized crossover design, the control bread and three test foods were given on separate occasions after an overnight fast. Blood samples were collected through finger prick at time intervals of 0, 15, 30, 45, 60, 90, and 120 min and analyzed for glucose concentrations. Results. The computed incremental area under the glucose response curve (IAUC varies significantly across test foods (P<.0379 with the pure QPM grits yielding the lowest IAUC relative to the control by 46.38. Resulting GI values of the test foods (bootstrapped were 80.36 (SEM 14.24, 119.78 (SEM 18.81, and 93.17 (SEM 27.27 for pure QPM grits, milled rice, and rice-QPM grits mixture, respectively. Conclusion. Pure QPM corn grits has a lower glycaemic response compared to milled rice and the rice-corn grits mixture, which may be related in part to differences in their dietary fibre composition and physicochemical characteristics. Pure QPM corn grits may be a more health beneficial food for diabetic and hyperlipidemic individuals.

  1. Economic Analysis of the Greenland Inland Traverse (GrIT)

    Science.gov (United States)

    2016-06-01

    fuel and cargo based on data from the 2012 and 2014 seasons. DISCLAIMER: The contents of this report are not to be used for advertising ...GrIT compared with airlift ....................................................................... 24 13 Fuel consumed by GrIT12 and GrIT14 compared...objective was to identify and quantify, insofar as possible, the component costs of the GrIT and airlift resupply modes. In effect , we sought to link

  2. PRODUCTION OF THE STEEL CAST THERMO-TREATED GRIT IN CONDITIONS OF MINSK AUTOMOBILE PLANT

    Directory of Open Access Journals (Sweden)

    P. S. Gurchenko

    2004-01-01

    Full Text Available The technical and economic characteristic of the created and developed technological processes of the industrial production of the steel casting grit heat-treatable by induction heat is given.

  3. Grit Trumps Talent? An experimental approach

    DEFF Research Database (Denmark)

    Gerhards, Leonie; Gravert, Christina Annette

    Perseverance to accomplish long-term goals, also know as grit, is a crucial determinant for success in life. In the present study we introduce an innovative laboratory design to elicit grit in an incentivized and controlled way. Subjects work on a computerized task to solve anagrams. By observing...

  4. Diallel analysis of corn for special use as corn grits: determining the main genetic effects for corn gritting ability.

    Science.gov (United States)

    Conrado, T V; Scapim, C A; Bignotto, L S; Pinto, R J B; Freitas, I L J; Amaral, A T; Pinheiro, A C

    2014-08-26

    Corn grits are used for various purposes such as flakes, snacks, livestock feed, hominy, extruded products, beer, etc. The grit size proportion varies according to the hybrid, and thus, once the use of the grits is linked to the particle size, determining the genetic effects is essential to develop hybrids for any specific use. For this purpose a complete diallel series of crosses, involving eight parents, was performed near Maringá, PR, Brazil. The objective of this study was to evaluate the general (GCA) and specific (SCA) combining abilities of 28 progeny for selection of hybrids for breeding programs and extraction of inbred lines for hybrid development. The response variables, such as plant height, ear insertion height, crop stand, grain yield, and grits, small grits and bran production, were gauged and appraised for each of the 28 progeny. The trait effects and GCA were significant for all response variables, while for SCA, only grain yield and crop stand showed significance (P < 0.05), according to Griffing (1955) analysis. A significant weak negative partial correlation was found between grain yield and grits conversion. In relation to the hybrid selection for breeding programs, the parent IAC Nelore was highly recommended for recurrent selection and the hybrids IPR 119 x HT 392 and IAC Nelore x HD 332 for the extraction of pure lines for hybrid development.

  5. Review of Grit and Resilience Literature within Health Professions Education

    Science.gov (United States)

    Cain, Jeff

    2018-01-01

    Objective. To review literature pertaining to grit and resilience in health professions education. Findings. There is significant interest in grit and resilience throughout the health professions, but little has been published with regard to pharmacy. Although there are methodological issues with defining and measuring grit and resilience, several studies have shown relationships between the constructs and personal and academic well-being. Educational interventions aimed at increasing grit and resilience have produced mixed results. Developing protective factors appears to be the most common approach in helping students become more resilient. Summary. Literature pertaining to grit and resilience reveals that the terms are nuanced, complex, and difficult to measure and understand. Regardless, the general characteristics associated with grit and resilience are of interest to educators and warrant further study. PMID:29606705

  6. Recycling of paint-contaminated grit.

    Science.gov (United States)

    Taha, R; al-Alawi, D; al-Nabhani, M; Pillay, A E; al-Hamdi, A

    2001-08-01

    The impact on the environment of using paint-contaminated grit (PCG) as a partial or full replacement for sand in Portland cement mortar and asphalt concrete mixtures was investigated. The grit waste material originated from abrasive blasting of offshore steel structures. There is a major environmental concern regarding the safe disposal of the spent blasting abrasives that contain paint chips or paint particles and other debris removed from the surface of the steel structures. This work investigated the potential reuse of PCG in Portland cement concrete (PCC) and hot mix asphalt concrete. Several studies were conducted to establish the integrity of the materials containing the recycled grit. These included the chemical and physical characterization of natural sand and PCG, the assay of leaches associated with the grit material for hazardous metal contaminants, such as Cr, Cd and Pb, and the assessment of the mechanical properties of the PCG-substituted mortars by applying special tests (such as Marshall stability and determination of the flow properties) to the PCG-substituted asphalt concrete mixtures. The overall results demonstrated that the potential reuse of PCG in PCC and asphalt concrete mixtures would not pose any environmental threat and could produce several benefits, such as reduced disposal costs, protection of water sources from improper disposal practices and reduced costs in the production of natural aggregates and asphalt cement.

  7. Earth Construction and Landfill Disposal Options for Slaker Grits

    OpenAIRE

    Risto Pöykiö; G. Watkins; H. Nurmesniemi and O. Dahl

    2010-01-01

    Slaker grits, an industrial residue originating from the chemical recovery process at sulfate (kraft) pulp mills, are typically disposed of to landfill in Finland. However, due to the relatively low total heavy metal and low leachable heavy metal, chloride, fluoride, sulfate, Dissolved O rganic Carbon (DOC) and Total Dissolved Solids (TDS) concentrations, the residue is a potential earth construction material. This paper gives an overview of the relevant Finnish legislation on the use of indu...

  8. Personality and Family Context in Explaining Grit of Taiwanese High School Students

    Science.gov (United States)

    Lin, Che-Li; Chang, Chun-Yen

    2017-01-01

    Grit, one of the newly developed non-cognitive traits, encompasses the characteristics of perseverance and consistency of interest. Grit is associated with good academic performance, resilience, and well-being. To understand the nature of Grit in detail, this study probed the relationship between Grit and the widely-applied and well-established…

  9. A Genealogy of Grit: Education in the New Gilded Age

    Science.gov (United States)

    Stokas, Ariana Gonzalez

    2015-01-01

    Recently, due in part to the research of Angela Duckworth, the cultivation of dispositions in education, grit in particular, has gained the attention of educational policymakers and the educational research community. While much of the research has focused on how to detect grit, there has been little discussion regarding how grit came to be valued…

  10. Grit, anxiety, and stress in emergency physicians.

    Science.gov (United States)

    Wong, Matthew L; Anderson, Jared; Knorr, Thomas; Joseph, Joshua W; Sanchez, Leon D

    2018-02-26

    The personality traits of emergency physicians are infrequently studied, though interest in physician wellness is increasing. The objective of this study is to acquire pilot data about the amount of grit, anxiety, and stress in emergency physicians using established psychological survey instruments, and to examine their associations of each of these traits with each other. Thirty-six emergency medicine resident and attending physicians from an urban academic medical center consented for enrollment. Participants were administered the Duckworth 12-point Grit Scale, the State-Trait Anxiety Inventory (STAI), and the Perceived Stress Scale (PSS), which measure grit, anxiousness, and perceived stress, respectively. These are the gold standard psychological instruments for each of their areas. We analyzed the results with descriptive statistics, Spearman correlations, and linear regression. Nineteen residents and 17 attending physicians completed the surveys during the first quarter of a new academic year. The mean grit score was 3.7 (95% CI 3.5-3.8, SD: 0.56), the mean trait-anxiety score was 32.61 (95% CI 30.15-35.07, SD: 7.26), and the mean PSS score was 12.28 (95% CI 10.58-13.97, SD: 4.99). Only trait-anxiety and perceived stress were significantly correlated (Spearman's rho: 0.70, panxious reported more stress. Levels of grit were not associated with trait-anxiety. These psychological concepts should be studied further as they relate to the function and health of emergency medicine providers. Copyright © 2018. Published by Elsevier Inc.

  11. The Gritty: Grit and Non-traditional Doctoral Student Success

    Directory of Open Access Journals (Sweden)

    Ted M. Cross

    2014-07-01

    Full Text Available As higher education is changing to reach larger numbers of students via online modalities, the issue of student attrition and other measures of student success become increasingly important. While research has focused largely on undergraduate online students, less has been done in the area of online non-traditional doctoral student success, particularly from the student trait perspective. The concept of grit, passion and persistence for long-term goals, has been identified as an important element of the successful attainment of long-term goals. As doctoral education is a long-term goal the purpose of this study was to examine the impact of doctoral student grit scores on student success. Success was measured by examining current student GPA and other factors. Significant relationships were found between grit and current student GPA, grit and the average number of hours students spent on their program of study weekly, and grit and age. The results of this research maybe important for informing how doctoral education is structured and how students might be better prepared for doctoral work.

  12. Physical Fitness, Grit, School Attendance, and Academic Performance among Adolescents.

    Science.gov (United States)

    Cosgrove, Jonathan M; Chen, Yen T; Castelli, Darla M

    2018-01-01

    The purpose of this study was to examine the relationship of grit as a construct representing perseverance to overcoming barriers and the total number of school absences to academic performance (AP) while controlling for sociodemographics, fitness (i.e., PACER), and Body Mass Index (BMI). Adolescents ( N = 397, SD = 1.85; 80.9% females; 77.1% Hispanic) from an urban, minority-majority city in the Southern United States completed the FitnessGram® assessment of physical fitness (e.g., aerobic capacity and Body Mass Index (BMI)) and the valid and reliable short grit survey. The schools provided sociodemographics, attendance, and AP data for the adolescents. Adolescents with higher grit scores ( r s = 0.21, P < 0.001) and less total absences ( r s = -0.35, P < 0.001) performed better on AP. Hierarchical multiple regression indicated that grit and absences were associated with AP ( β = 0.13, P < 0.01 and β = -0.35, P < 0.001, resp.). Grit and a total number of absences are significant contributors to academic success, particularly among Hispanic adolescents. Further, grit and school attendance may serve as a better measure of protective factors over proximal health measures of cardiovascular health and BMI.

  13. Got Grit? Maybe…

    Science.gov (United States)

    Duckor, Brent

    2017-01-01

    The constructs that currently animate today's dispositions movement are grit and growth mindset. However, the evidence for the reliability and instructional uses of such noncognitive factors in K-12 schools--and of the surveys and tools that attempt to measure them--is thin. After a look at the "logic of assessment" with its focus on…

  14. Properties of extruded snacks supplemented with amaranth grain grits

    Directory of Open Access Journals (Sweden)

    Hadnađev Miroslav S.

    2009-01-01

    Full Text Available Extruded amaranth grain products have specific aroma and can be used as snack food, supplement in breakfast cereals, or as raw material for further processing. Extruded products of corn-amaranth grits blends, containing 20% or 50% amaranth grain grits, were produced by extrusion-cooking using a laboratory Brabender single screw extruder 20 DN. Extrudates with various texture were obtained. During extrusion process starch granules are partially degraded, hence rheological properties were examined. All samples exhibited thixotropic flow behavior. Those samples in which part of the corn grits was replaced with amaranth one had lower viscosity and exhibited lower level of structuration during storage.

  15. Army Grit: Field Marshal Viscount Slims Key to Victory

    Science.gov (United States)

    2017-05-25

    24 Part Two: The Education of a Grit Paragon...Damon is a professor of psychology at Stanford Graduate School of Education ; and Duckworth, Grit: The Power of Passion and Perseverance, 91. . 8 The...visitors from the fighting troops, especially those who interfered with the pleasant tenor of staff life, were not really welcome.”84 Later in his career

  16. Rumination's effect on suicide ideation through grit and gratitude: A path analysis study.

    Science.gov (United States)

    White, Evan J; Kraines, Morganne A; Tucker, Raymond P; Wingate, LaRicka R; Wells, Tony T; Grant, DeMond M

    2017-05-01

    The current study documents the relationship between suicide ideation, grit and gratitude, and rumination subtypes of brooding and reflection. The relationship between rumination and suicide ideation has been well documented and previous research has demonstrated that grit and gratitude are protective factors against suicide. We hypothesized that both subtypes of rumination would have an indirect effect on suicide ideation through levels of grit and gratitude. Results of a conditional indirect effects path analysis indicated that brooding was indirectly related to suicide ideation through gratitude. Brooding interacted with grit such that it only predicted suicide ideation at low levels of grit. Reflection interacted with gratitude to predict levels of grit. Results suggest that brooding may impact suicide risk and resilience through its effect on gratitude, indicating important cognitive-behavioral targets for suicide prevention strategies. These results extend the literature about the relationship between well known risk factors for suicide and protective factors. Copyright © 2017 Elsevier Ireland Ltd. All rights reserved.

  17. Optimization of processing parameters of amaranth grits before grinding into flour

    Science.gov (United States)

    Zharkova, I. M.; Safonova, Yu A.; Slepokurova, Yu I.

    2018-05-01

    There are the results of experimental studies about the influence of infrared treatment (IR processing) parameters of the amaranth grits before their grinding into flour on the composition and properties of the received product. Using the method called as regressionfactor analysis, the optimal conditions of the thermal processing to the amaranth grits were obtained: the belt speed of the conveyor – 0.049 m/s; temperature of amaranth grits in the tempering silo – 65.4 °C the thickness of the layer of amaranth grits on the belt is 3 - 5 mm and the lamp power is 69.2 kW/m2. The conducted researches confirmed that thermal effect to the amaranth grains in the IR setting allows getting flour with a smaller size of starch grains, with the increased water-holding ability, and with a changed value of its glycemic index. Mathematical processing of experimental data allowed establishing the dependence of the structural and technological characteristics of the amaranth flour on the IR processing parameters of amaranth grits. The obtained results are quite consistent with the experimental ones that proves the effectiveness of optimization based on mathematical planning of the experiment to determine the influence of heat treatment optimal parameters of the amaranth grits on the functional and technological properties of the flour received from it.

  18. Grit: A Potential Protective Factor Against Substance Use and Other Risk Behaviors Among Latino Adolescents.

    Science.gov (United States)

    Guerrero, Lourdes R; Dudovitz, Rebecca; Chung, Paul J; Dosanjh, Kulwant K; Wong, Mitchell D

    2016-04-01

    Grit, defined as "working strenuously toward challenges, maintaining effort and interest over years despite failure, adversity, and plateaus in progress," is strongly associated with academic achievement and life success and may also be associated with health outcomes and behaviors. We examined predictors of grit, and the association between grit and health behaviors among at-risk Latino adolescents. We analyzed baseline survey data collected in 2013-2014 from a sample of 1270 9th graders in low-income neighborhoods of Los Angeles. We examined factors associated with grit and whether grit is associated with substance use and delinquent behaviors, controlling for adolescent and parent sociodemographic factors. In a sample of mostly Latino adolescents (89.5%), compared to those with low grit, those with high grit had significantly lower odds of alcohol use in the last 30 days (odds ratio 0.30, P authoritative parenting style, parental employment, and high self-efficacy scores. Grit may be an important candidate protective factor against substance use and other risk behaviors among Latino adolescents. Copyright © 2016 Academic Pediatric Association. Published by Elsevier Inc. All rights reserved.

  19. Experimental study on manufacturing of grits-spiral- distribution electroplated wire saw

    Directory of Open Access Journals (Sweden)

    Yufei GAO

    2016-12-01

    Full Text Available In order to obtain high performance electroplating diamond wire saw, experimental studies are conducted for development of grits-spiral-distribution electroplated diamond wire saw using sand-suspend electroplating method. The influences of pre-plating cathode current density, grits electro-embedding cathode current density and time on composite deposite coating appearance and grits distribution of wire saw are analyzed, and the sawing experiment is carried out by using the trial wire saw. The results show that good bonding strength between the coating and the steel wire can be obtained when the adopted cathode current density is 5.0 A/dm2 at pre-plating stage; good coating and girts distribution can be obtained when the adopted cathode current density is 5.0 A/dm2 and the electroplating time is 7~8 min at grits electro-embedding stage. By winding insulation wire on the surface of steel wire and reasonably selecting technological parameters before pre-plating can make the diamond wire saw with grits-spiral-distribution on surface, and the new type of wire saw has a better crumbs-clearing effect in wire sawing process.

  20. Characterization of gizzards and grits of wild cranes found dead at Izumi Plain in Japan.

    Science.gov (United States)

    Uegomori, Mima; Haraguchi, Yuko; Obi, Takeshi; Takase, Kozo

    2018-04-18

    We analyzed the gizzards, and grits retained in the gizzards of 41 cranes that migrated to the Izumi Plain during the winter of 2015/2016 and died there, either due to accident or disease. These included 31 Hooded Cranes (Grus monacha) and 10 White-naped Cranes (G. vipio). We determined body weight, gizzard weight, total grit weight and number per gizzard, and size, shape, and surface roundness of the grits. Average gizzard weights were 92.4 g for Hooded Cranes and 97.1 g for White-naped Cranes, and gizzard weight positively correlated with body weight in both species. Average total grit weights per gizzard were 19.7 g in Hooded Cranes and 25.7 g in White-naped Cranes, and were significantly higher in the latter. Average percentages of body weight to grit weight were 0.8% in Hooded Cranes and 0.5% in White-naped Cranes. Average grit number per gizzard was 693.5 in Hooded Cranes and 924.2 in White-naped Cranes, and were significantly higher in the latter. The average grit size was 2.8 mm in both species. No differences were found in the shape and surface roundness of grits between the two species. To the best of our knowledge, this is the first study on the grits retained in the gizzards of Hooded and White-naped Cranes.

  1. Effect of boiling, frying, and baking on recovery of aflatoxin from naturally contaminated corn grits or cornmeal.

    Science.gov (United States)

    Stoloff, L; Trucksess, M W

    1981-05-01

    Corn grits naturally contaminated with aflatoxins were used for making boiled grits, and portions of the boiled grits were used for making pan-fried grits; cornmeal naturally contaminated with aflatoxins was used for making corn muffins. Procedures and recipes were derived from cookbook and market package recommendations. From analyses of the products for aflatoxins before and after preparation of the table-ready products, it was determined that 72 +/- 9% (n = 15) of the aflatoxin found in the original grits could be recovered after the grits were boiled. The recovery of aflatoxin B1 after the grits were fried was either 66 +/- 10% (n = 6) or 47 +/- 8% (n = 9), depending on whether 3 cups of water or 4 cups of water per cup of grits, respectively, were used for preparing the boiled grits before frying. Similarly, it was determined that 87 +/- 4% (n = 9) of the aflatoxin B1 found in the original cornmeal could be recovered from the baked muffins. No detectable aflatoxin B2 a was present in the extracts from any of the table-ready products.

  2. Acid etching and plasma sterilization fail to improve osseointegration of grit blasted titanium implants

    DEFF Research Database (Denmark)

    Mortensen, Mikkel Saksø; Jakobsen, Stig Storgaard; Saksø, Henrik

    2012-01-01

    Interaction between implant surface and surrounding bone influences implant fixation. We attempted to improve the bone-implant interaction by 1) adding surface micro scale topography by acid etching, and 2) removing surface-adherent pro-inflammatory agents by plasma cleaning. Implant fixation...... was evaluated by implant osseointegration and biomechanical fixation.The study consisted of two paired animal sub-studies where 10 skeletally mature Labrador dogs were used. Grit blasted titanium alloy implants were inserted press fit in each proximal tibia. In the first study grit blasted implants were...... compared with acid etched grit blasted implants. In the second study grit blasted implants were compared with acid etched grit blasted implants that were further treated with plasma sterilization. Implant performance was evaluated by histomorphometrical investigation (tissue-to-implant contact, peri-implant...

  3. Grit and burnout in UK doctors: a cross-sectional study across specialties and stages of training.

    Science.gov (United States)

    Halliday, Laura; Walker, Abigail; Vig, Stella; Hines, John; Brecknell, John

    2017-07-01

    Grit is characterised by the ability to persevere during difficulties and maintain a sustained effort over an extended period of time. Throughout their careers, doctors will experience many periods of stress and difficulty. This may result in burnout, defined by the presence of exhaustion and disengagement from work. This study aims to characterise the relationship between grit and burnout in doctors and to establish whether there are differences between specialties and levels of training. A multicentre cross-sectional survey by questionnaire was used. Participants were recruited from training days and an online medical forum. The survey consisted of the Short Grit Scale and the Oldenburg Burnout Inventory, which examine levels of grit and burnout, respectively. 548 responses were collected. We found a weak negative correlation between grit and burnout in UK doctors (r=-0.243, p<0.001). Hospital consultants had significantly higher grit scores than trainees. The highest level of burnout was found among general practitioners (GPs). When GPs were analysed separately, the correlation between grit and resilience was not seen. An understanding of an individual's level of grit may be used to identify doctors at a greater risk of burnout. As a high level of grit is associated with less burnout, interventions to improve grit through resilience training should be examined. Further research is needed to understand how grit levels change during a doctor's career and why GPs experience higher levels of burnout. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  4. Size and mass of grit in gizzards of sandhill cranes, tundra swans, and mute swans

    Science.gov (United States)

    Franson, J. Christian; Hansen, Scott P.; Duerr, Adam E.; DeStefano, Stephen

    2001-01-01

    Because it has been suggested that waterbirds may ingest lost or discarded lead fishing weights as grit, we examined grit in the gizzards of Sandhill Cranes (Grus canadensis), Tundra Swans (Cygnus columbianus), and Mute Swans (Cygnus olor), three species where individuals have been poisoned by the ingestion of lead fishing weights. The greatest proportion (by mass) of grit in gizzards of Sandhill Cranes consisted of particles with a minimum dimension of 2.36-4.75 mm. Grit particles in swans were much smaller, with the most prevalent (by mass) being 0.6-1.18 mm. The greatest dimension of the largest grit particle found in cranes and swans was 17.4 mm and 14.0 mm, respectively. The U.S. Environmental Protection Agency has proposed a ban on lead fishing weights of ≤25.4 mm in any dimension. Based on the size of grit particles that we found in gizzards of Sandhill Cranes, Mute Swans, and Tundra Swans, we believe it is unlikely that individuals of those species would ingest, as grit, lead fishing weights larger than 25.4 mm in any dimension.

  5. Stability amidst turmoil: Grit buffers the effects of negative life events on suicidal ideation.

    Science.gov (United States)

    Blalock, Dan V; Young, Kevin C; Kleiman, Evan M

    2015-08-30

    The goal of the current study is to examine the role of grit as a resilience factor that reduces the risk for suicidal ideation conferred by negative life events. Participants (N=209) completed measures of negative life events and grit at baseline and a measure of suicidal ideation at follow-up four weeks later. Poisson regression analyses found that higher levels of grit buffered the relationship between negative life events and suicidal ideation such that negative life events only predicted suicidal ideation if grit was low. These results suggest that high grit can abate the increased suicidal ideation associated with negative life events. Aside from absolute levels of suicidal ideation, being able to predict or buffer dramatic shifts in suicidal ideation can be a useful diagnostic tool during interventions. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  6. Suplementasi Tepung Putih Telur untuk Memperbaiki Nilai Nutrisi Snack Ekstrusi Berbahan Grits Jagung

    OpenAIRE

    Budiman, C; Wulandari, Z; Suryati, T

    2009-01-01

    Snack is popular for children and adult. It could be made by extrusion process. Snack is low in protein content because it is made up of cereal such as rice and corn. On the basis of nutritional and functional properties, egg was used in food industries. The objectives of the research were to analyze the nutrient content and in vitro digestibility of extruded snack from corn grits which was supplemented by egg white powder as a protein source. Randomized complete block design was used in this...

  7. Insoluble granite-grit allows broiler chicks to have better growth performance and gut health

    Directory of Open Access Journals (Sweden)

    Güray Erener

    Full Text Available ABSTRACT The objective of this study was to investigate the effects of insoluble granite-grit on growth performance and gut health status of broiler chicks. One hundred and sixty 14-day-old broiler chicks were allocated to experimental groups control and grit feeding. Each group included 80 birds divided by four replicates, each consisting of 20 birds, 10 males and 10 females. Feed intake, body weight gain, feed conversion ratio, carcass weight, dressing percentage, gut length, abdominal fat pad, and liver, heart, and gizzard weights were determined. Starter diet included 230 g crude protein (CP kg−1 and 3.15 Mcal metabolizable energy (ME kg−1 during the days 14 to 21; grower diet included 212 g CP kg−1 and 3.20 Mcal ME kg−1; and finisher diet included 190 g CP kg−1 and 3.20 Mcal ME kg-1. Control birds were fed broiler diets, while grit-fed birds were allowed to consume broiler diets, including 3% insoluble granite-grit. Grit feeding improved the final body weight (2268 vs. 2336 g with better feed efficiency (2.03 vs. 1.95 and less feed intake (3780 vs. 3764 g. Grit feeding increased gizzard weight (31.63 vs. 48.00 g without affecting carcass weight (1643 vs. 1708 g, dressing percentage (73.50 vs. 73.60%, liver weight (42.69 vs. 40.69 g, heart weight (12.00 vs. 11.63 g, abdominal fat pad (34.50 vs. 35.38 g, and gut length (229.3 vs. 220.7 cm of broilers. Grit feeding affects daily gain, feed intake, and feed conversion ratio positively by increasing gizzard development and health.

  8. L'intégrité au CERN

    CERN Document Server

    HR, Department

    2015-01-01

    Pour mener à bien sa mission, le CERN compte sur la confiance et le soutien matériel de ses États membres et de ses partenaires, et se doit de gérer de manière exemplaire les ressources qui lui sont confiées. Dès lors, le CERN attend la plus haute intégrité de la part de tous ses collaborateurs (membres du personnel, consultants, contractants travaillant sur le domaine ou personne engagée à tout autre titre au CERN ou pour le compte de celui-ci). L’intégrité est l’une des valeurs essentielles du CERN. Elle est définie dans le Code de conduite comme le fait d’« agir avec éthique, en toute honnêteté intellectuelle et en étant responsable de ses actes ».

  9. Positive Psychology Factors as Predictors of Latina/o College Students' Psychological Grit

    Science.gov (United States)

    Vela, Javier Cavazos; Smith, Wayne D.; Whittenberg, James F.; Guardiola, Rebekah; Savage, Miranda

    2018-01-01

    Latina/o college students (N = 130) provided perceptions of psychological grit, presence of meaning in life, search for meaning in life, hope, life satisfaction, and mindfulness. Hope and mindfulness were significant predictors of psychological grit. A discussion regarding the importance of these findings and implications for counselors are…

  10. Grit-mediated frictional ignition of a polymer-bonded explosive during oblique impacts: Probability calculations for safety engineering

    International Nuclear Information System (INIS)

    Heatwole, Eric; Parker, Gary; Holmes, Matt; Dickson, Peter

    2015-01-01

    Frictional heating of high-melting-point grit particles during oblique impacts of consolidated explosives is considered to be the major source of ignition in accidents involving dropped explosives. It has been shown in other work that the lower temperature melting point of two frictionally interacting surfaces will cap the maximum temperature reached, which provides a simple way to mitigate the danger in facilities by implementing surfaces with melting points below the ignition temperature of the explosive. However, a recent series of skid testing experiments has shown that ignition can occur on low-melting-point surfaces with a high concentration of grit particles, most likely due to a grit–grit collision mechanism. For risk-based safety engineering purposes, the authors present a method to estimate the probability of grit contact and/or grit–grit collision during an oblique impact. These expressions are applied to potentially high-consequence oblique impact scenarios in order to give the probability of striking one or more grit particles (for high-melting-point surfaces), or the probability of one or more grit–grit collisions occurring (for low-melting-point surfaces). The probability is dependent on a variety of factors, many of which can be controlled for mitigation to achieve acceptable risk levels for safe explosives handling operations. - Highlights: • Unexpectedly, grit-mediated ignition of a PBX occurred on low-melting point surfaces. • On high-melting surfaces frictional heating is due to a grit–surface interaction. • For low-melting point surfaces the heating mechanism is grit–grit collisions. • A method for estimating the probability of ignition is presented for both surfaces

  11. The Role of Grit in College Student Health Care Management Skills and Health-Related Quality of Life.

    Science.gov (United States)

    Sharkey, Christina M; Bakula, Dana M; Gamwell, Kaitlyn L; Mullins, Alexandria J; Chaney, John M; Mullins, Larry L

    2017-10-01

    To examine the relationship of grit, an intrapersonal characteristic defined by perseverance and passion for long-term goals, to health care management skills and adolescent and young adult (AYA) health-related quality of life (HRQoL). Higher levels of grit were expected to relate to greater health care management skills and HRQoL, and skills were predicted to mediate the relationship between grit and HRQoL. Four hundred seventy undergraduates (Mdnage=19, interquartile range = 2) completed online questionnaires, including the short Grit Scale, Transition Readiness Assessment Questionnaire, and 36-Item Short Form Survey (SF-36) (HRQoL). Higher grit related to greater health care management skills (R2=0.15 p.05). This preliminary investigation illustrates the role of grit in AYA health, suggesting that it may be a target for interventions aimed at improving skills and HRQoL outcomes. © The Author 2017. Published by Oxford University Press on behalf of the Society of Pediatric Psychology. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

  12. The effects of different sizes of insoluble grit on growth performance and carcass traits in broiler chickens

    Directory of Open Access Journals (Sweden)

    Abbas Ali Rajabiyan Moghaddam

    2016-04-01

    Full Text Available The present study was conducted to investigate the effects of different sizes of insoluble grit on growth performance and carcass traits in broiler chickens. A total of 200 broilers (Ross 308, 10 days old, were randomly allotted to five experimental equal groups with four replicates of 10 chickens (five male and five female and fed with basal diet + ground wheat (without grit; basal diet + whole wheat (without grit and basal diet contain 1.5% grit of diet with sizes of 2, 3 and 4 mm. Growth performance (evaluated through weight gain, feed intake and feed conversion ratio was determined on day 24 and 42. Also, carcass traits (relative weights of carcass, breast, thigh, liver, heart, gizzard and intestine and intestine length were assessed on day 42. Weight gains and feed conversion ratio were significantly improved in broilers added with grit 2 mm compared to the control group (p<0.05, whereas; carcass traits were not significantly altered. These data suggest that grit with size of 2 mm improve growth performance in broiler chickens.

  13. Investigating Grit and Its Relations with College Students' Self-Regulated Learning and Academic Achievement

    Science.gov (United States)

    Wolters, Christopher A.; Hussain, Maryam

    2015-01-01

    We investigated grit and its relations with students' self-regulated learning (SRL) and academic achievement. An ethnically diverse sample of 213 college students completed an online self-report survey that included the Grit Short scale (Duckworth and Quinn "Journal of Personality Assessment, 91(2)," 166-174, 2009), seven indicators of…

  14. Air-propelled abrasive grit can damage the perennial weed, quackgrass, Elytrigia repens (L.) Nevski

    Science.gov (United States)

    New techniques are needed to control quackgrass in organic crops. With greater than or equal to 2 applications of abrasive air-propelled (800 kPa) corncob grit to 15 cm tall quackgrass tillers, regrowth was minimal at 5 weeks after treatment. Abrasive grits may be effective tools to help manage pere...

  15. Effect of the bur grit size on the flexural strength of a glass-ceramic

    Directory of Open Access Journals (Sweden)

    P. P. Kist

    Full Text Available Abstract The purpose of the present study was to determine the biaxial flexural strength (BFS of a CAD/CAM leucite reinforced glass-ceramic ground by diamond burs of different grit sizes and the influence of surface roughness on the BFS. For this, 104 plates were obtained from CAD/CAM ceramic blocks and divided into 4 groups (n = 26, according to bur grit size: extra-fine, fine, medium and coarse. Roughness parameters (Ra, RyMax were measured, and plates were kept dry for 7 days. The flexural test was carried out and BFS was calculated. Ra, RyMax and BFS data were subjected to analysis of variance and post-hoc test. Weibull analysis was used to compare characteristic strength and Weibull modulus. Regression analysis was performed for BFS vs. Ra and RyMax. When burs with coarse grit were used, higher surface roughness values were found, causing a negative effect on the ceramic BFS (117 MPa for extra-fine, and 83 MPa for coarse. Correlation (r between surface roughness and BFS was 0.78 for RyMax and 0.73 for Ra. Increases in diamond grit size have a significant negative effect on the BFS of leucite-reinforced glass-ceramics, suggesting that grinding of sintered glass-ceramic should be performed using burs with the finest grit possible in order to minimize internal surface flaws and maximize flexural strength.

  16. The grit effect: predicting retention in the military, the workplace, school and marriage

    OpenAIRE

    Eskreis-Winkler, Lauren; Shulman, Elizabeth P.; Beal, Scott A.; Duckworth, Angela L.

    2014-01-01

    Remaining committed to goals is necessary (albeit not sufficient) to attaining them, but very little is known about domain-general individual differences that contribute to sustained goal commitment. The current investigation examines the association between grit, defined as passion and perseverance for long-term goals, other individual difference variables, and retention in four different contexts: the military, workplace sales, high school, and marriage. Grit predicted retention over and ...

  17. Investigating Grit Variables and Their Relations with Practice and Skill Groups in Developing Sport Experts

    Science.gov (United States)

    Tedesqui, Rafael A. B.; Young, Bradley W.

    2017-01-01

    Grit, the tendency to work hard toward long-term goals, maintaining effort and interest over years despite failure and adversity, has predicted several achievement outcomes. However, minimal work has examined grit within a sport expertise development framework, and specifically its association with deliberate practice (DP) in sport. Participants,…

  18. Impact of industrial dry-milling on fumonisin redistribution in non-transgenic corn in Brazil.

    Science.gov (United States)

    Bordini, Jaqueline Gozzi; Ono, Mario Augusto; Garcia, Glauco Tironi; Fazani, Victor Hugo Meconi; Vizoni, Édio; Rodrigues, Karem Caroline Bonacin; Hirooka, Elisa Yoko; Ono, Elisabete Yurie Sataque

    2017-04-01

    The aim of this study was to evaluate the fate of fumonisins B 1 (FB 1 ) and B 2 (FB 2 ) during industrial dry-milling in two lots from 2014 (n=120) and 2015 (n=120) of non-transgenic corn and their fractions (germ, pericarp, endosperm, cornmeal and grits), collected from one of the major Brazilian milling industries. Fumonisins were concentrated in the germ and pericarp at a rate of 322% and 188% (lot 1) and 311% and 263% (lot 2), respectively. In the endosperm, cornmeal and grits fumonisin levels decreased from 60 to 95%. Fumonisin levels in cornmeal and grits were below the maximum limit tolerated by the European Commission. Therefore, corn industrial dry-milling can contribute to reducing fumonisin levels in corn products intended for human consumption. Copyright © 2016 Elsevier Ltd. All rights reserved.

  19. Distribution of MCA-coated grits in maize fields after high wheel tractor application for disrupting orientation of Diabrotica virgifera virgifera LeConte.

    Science.gov (United States)

    Wennemann, Ludger; Hummel, Hans E

    2002-01-01

    High wheel tractor applications of 4-methoxycinnamaldehyde (MCA)-coated corn granules ('grits') were conducted in Ruski Krstur (Serbia) in summer 2001 in a 5 ha corn field. Grits are a by-product after corn is harvested and separated from the cob and used as a carrier medium to disseminate MCA into the corn field. MCA is a kairomone mimic derived form Cucurbita maxima (Duchesne) used to disrupt orientation of Diabrotica virgifera virgifera LeConte towards different MCA and pheromone baited traps. The ultimate goal is to investigate the use of MCA as a mating disruptant. MCA was dissolved in an organic solvent and mixed in a cement machine with the grits. Grits were applied at rates of 17.39, 17.1 and 12.45 kg/ha on July 4th, July 19th and August 3rd. Before the impact of MCA as a disruptant can be addressed, the distribution patterns of MCA coated grits have to be thoroughly investigated. They were evaluated by counting girts deposited in 16 or 20 plastic dishes of 30-cm diameter positioned along 2 rows through the field directly after the grit application by tractor. Additionally, grits deposited on corn plant surface such as leaves, leaf axils and corn cobs were counted. Total number of grits collected in plastic dishes revealed even application rates at the first and second application but not on the third application date. Number of grits collected on plant surfaces were significantly different from each other regarding each application date. Altogether, grit distribution in the dishes as well as on the plant surface was variable. However, distribution patterns achieved so far hold promise to disseminate MCA coated grits into corn fields for orientation disruption or mating disruption of D. virgifera virgifera.

  20. Research on the Single Grit Scratching Process of Oxygen-Free Copper (OFC

    Directory of Open Access Journals (Sweden)

    Libin Zhang

    2018-04-01

    Full Text Available Single grit scratching is a basic form of material removal for many processes, such as grinding single point diamond turning and coating bonding performance tests. It has been widely used in the study of micro-scale and nano-scale material removal mechanisms. In this study, single grit linearly loading scratching tests were carried out on a scratching tester. A Rockwell indenter made of natural diamond was selected as the tool used, and the material of the workpiece was oxygen-free copper. Scratch topography was measured using a super-depth microscope to analyze the material deformation of the scratching process. A single grit scratching simulation has been developed by AdvantEdge™ to comprehensively study the material deformation of scratching processes. A material constitutive model and friction model were acquired using a quasi-static uniaxial compression experiment and a reciprocating friction test, respectively. These two models were used as the input models in the finite simulations. The simulated scratching forces aligned well with the experimental scratching forces, which verified the precision of the simulation model. Since only the scratching force could be obtained in the scratching experiment, the plastic strain, material flow, and residual stress of the scratching were further analyzed using simulations. The results showed that the plastic strain of the workpiece increased with the increase in scratching depth, and further analysis showed that the workpiece surface was distributed with residual compressive stress and the sub-surface was distributed with residual tensile stress in single grit scratching.

  1. Capturing the Dual Pillars of Grit: The Synergistic Benefits of Perseverance and Passion for Performance

    OpenAIRE

    Wihler, Andreas; Jachimowicz, Jon; Galinsky, Adam

    2018-01-01

    Previous research has found mixed evidence regarding the relationship between grit-defined as perseverance and passion for long-term goals-and performance. We propose that this inconsistency has occurred because prior research has emphasized perseverance, both theoretically and empirically, while insufficiently incorporating passion. We suggest that a combination of the original grit measure-which emphasizes perseverance-with a measure that assesses whether individuals attain desired levels o...

  2. The grit effect: predicting retention in the military, the workplace, school and marriage.

    Science.gov (United States)

    Eskreis-Winkler, Lauren; Shulman, Elizabeth P; Beal, Scott A; Duckworth, Angela L

    2014-01-01

    Remaining committed to goals is necessary (albeit not sufficient) to attaining them, but very little is known about domain-general individual differences that contribute to sustained goal commitment. The current investigation examines the association between grit, defined as passion and perseverance for long-term goals, other individual difference variables, and retention in four different contexts: the military, workplace sales, high school, and marriage. Grit predicted retention over and beyond established context-specific predictors of retention (e.g., intelligence, physical aptitude, Big Five personality traits, job tenure) and demographic variables in each setting. Grittier soldiers were more likely to complete an Army Special Operations Forces (ARSOF) selection course, grittier sales employees were more likely to keep their jobs, grittier students were more likely to graduate from high school, and grittier men were more likely to stay married. The relative predictive validity of grit compared to other traditional predictors of retention is examined in each of the four studies. These findings suggest that in addition to domain-specific influences, there may be domain-general individual differences which influence commitment to diverse life goals over time.

  3. The Role of Self-control and Grit in Domains of School Success in Students of Primary and Secondary School.

    Science.gov (United States)

    Oriol, Xavier; Miranda, Rafael; Oyanedel, Juan C; Torres, Javier

    2017-01-01

    Objective: Self-control and grit have become two of the most important variables that explain success in different aspects of people's daily life (Duckworth and Gross, 2014). Self-control promotes delayed gratification and directly influences thoughts, emotions, and impulses. On the other hand, grit enhances the achievement of goals through perseverance even before extreme external circumstances. Since both constructs are related, examining them together is compelling, as long as the different nuances that characterize each are taken into account. Two structural equation models (SEM) were conducted to observe the effect of self-control and grit on a more specific indicator of academic success (academic self-efficacy) and a more general indicator of school experience (satisfaction with school). Methods: The first model comprises 5,681 primary students ( M = 9.05; SD = 0.79), and the second 10,017 secondary students ( M = 14.20; SD = 1.04) from Lima, Peru. In both models, the influence of grit and self-control on school satisfaction was observed when taking self-efficacy as a mediator variable. Results: The results show that grit and self-control have strong associations in both primary and secondary students. When estimating the covariance of both constructs, grit is related with academic-self efficacy at both educational stages, but only to satisfaction with school in secondary students. On the contrary, self-control shows a significant relationship with school satisfaction only in primary education. In turn, self-efficacy shows a mediating effect between grit and school satisfaction. After calculating the invariance of the models, differences are observed by gender in the relationships between variables. Conclusion: The results indicate that both constructs are strongly interrelated. Regarding the associations with the indicators of academic success, a need for timely interventions specific to each educational stage is observed.

  4. Effect of the bur grit size on the flexural strength of a glass-ceramic

    OpenAIRE

    Kist, P. P.; Aurélio, I. L.; Amaral, M.; May, L. G.

    2016-01-01

    Abstract The purpose of the present study was to determine the biaxial flexural strength (BFS) of a CAD/CAM leucite reinforced glass-ceramic ground by diamond burs of different grit sizes and the influence of surface roughness on the BFS. For this, 104 plates were obtained from CAD/CAM ceramic blocks and divided into 4 groups (n = 26), according to bur grit size: extra-fine, fine, medium and coarse. Roughness parameters (Ra, RyMax) were measured, and plates were kept dry for 7 days. The flexu...

  5. Bioceramic inlays do not improve mechanical incorporation of grit-blasted titanium stems in the proximal sheep femur.

    Science.gov (United States)

    Keränen, Pauli; Koort, Jyri; Itälä, Ari; Ylänen, Heimo; Dalstra, Michel; Hupa, Mikko; Kommonen, Bertel; Aro, Hannu T

    2010-03-15

    The aim of the present study was to determine, if bioactive glass (BG) surface inlays improve osseointegration of titanium implants in the proximal femur of adult sheep. In simulation of uncemented primary stems (nine animals), only the proximal part of the implants was grit-blasted and three surface slots of the grit-blasted region were filled with sintered BG microspheres. Primary stems were implanted using press-fit technique. In revision stem simulation (eight animals), grit-blasting was extended over the whole implant and seven perforating holes of the stem were filled by sintered BG granules. Revision stems were implanted with a mixture of autogenous bone graft and BG granules. Comparison with solid partially or fully grit-blasted control stems implanted in the contralateral femurs was performed in the primary and revision stem experiments at 12 and 25 weeks, respectively. Implant incorporation was evaluated by torsional failure testing and histomorphometry. Only one-third of the primary stems anchored mechanically to bone. The revision stems incorporated better and the BG inlays of the revision stems showed ingrowth of new bone. However, there were no significant differences in the torsional failure loads between the stems with BG inlays and the control stems. In conclusion, surface BG inlays gave no measurable advantage in mechanical incorporation of grit-blasted titanium implants. Overall, the proximal sheep femur, characterized by minimal amount of cancellous bone and the presence of adipocytic bone marrow, seemed to present compromised bone healing conditions. (c) 2009 Wiley Periodicals, Inc.

  6. The age of the Takatika Grit, Chatham Islands, New Zealand

    NARCIS (Netherlands)

    Hollis, Christopher J.; Stickley, Catherine E.; Bijl, Peter K.; Schiøler, Poul; Clowes, Christopher D.; Li, Xun; Campbell, Hamish

    2017-01-01

    The oldest Paleogene strata on Chatham Islands, east of New Zealand, are the phosphatized conglomerates and sandstones of the Takatika Grit that crops out on the northeastern coast at Tioriori and unconformably overlies the Chatham Schist. An intact Cretaceous–Paleogene boundary transition is not

  7. Diffuse reflectance FTIR of stains on grit blasted metals

    Energy Technology Data Exchange (ETDEWEB)

    Powell, G.L.; Hallman, R.L. Jr.; Cox, R.L. [Oak Ridge Centers for Manufacturing Technologies, TN (United States)

    1997-08-09

    Diffuse reflectance mid-infrared Fourier transform (DRIFT) spectroscopy has been applied to the detection of oil contamination on grit-blasted metals. The object of this application is to detect and discriminate between silicone and hydrocarbon oil contamination at levels approaching 10 mg/m{sup 2}. A portable FTIR spectrometer with dedicated diffuse reflectance optics was developed for this purpose. Using translation devices positioned by instructions from the spectrometer operating system, images of macroscopic substrates were produced with millimeter spatial resolution. The pixels that comprise an image are each a full mid-infrared spectrum with excellent signal-to-noise, each determined as individual files and uniquely saved to disc. Reduced spectra amplitudes, based on peak height, area, or other chemometric techniques, mapped as a function of the spatial coordinates of the pixel are used to display the image. This paper demonstrates the application of the technique to the analysis of stains on grit-blasted metals, including the calibration of the method, the inspection of substrates, and the migration of oil contamination.

  8. The grit effect: predicting retention in the military, the workplace, school and marriage

    Directory of Open Access Journals (Sweden)

    Lauren eEskreis-Winkler

    2014-02-01

    Full Text Available Remaining committed to goals is necessary (albeit not sufficient to attaining them, but very little is known about domain-general individual differences that contribute to sustained goal commitment. The current investigation examines the association between grit, defined as passion and perseverance for long-term goals, other individual difference variables, and retention in four different contexts: the military, workplace sales, high school, and marriage. Grit predicted retention over and beyond established context-specific predictors of retention (e.g. intelligence, physical aptitude, Big Five personality traits, job tenure and demographic variables in each setting. Grittier soldiers were more likely to complete an Army Special Operations Forces (ARSOF selection course, grittier sales employees were more likely to keep their jobs, grittier students were more likely to graduate from high school, and grittier men were more likely to stay married. The relative predictive validity of grit compared to other traditional predictors of retention is examined in each of the four studies. These findings suggest that in addition to domain-specific influences, there may be domain-general individual differences which influence commitment to diverse life goals over time.

  9. Effects of small-grit grinding and glazing on mechanical behaviors and ageing resistance of a super-translucent dental zirconia.

    Science.gov (United States)

    Lai, Xuan; Si, Wenjie; Jiang, Danyu; Sun, Ting; Shao, Longquan; Deng, Bin

    2017-11-01

    The purpose of this study is to elucidate the effects of small-grit grinding on the mechanical behaviors and ageing resistance of a super-translucent dental zirconia and to investigate the necessity of glazing for the small-grit ground zirconia. Small-grit grinding was performed using two kinds of silicon carbide abrasive papers. The control group received no grinding. The unground surfaces and the ground surfaces were glazed by an experienced dental technician. Finally, the zirconia materials were thermally aged in water at 134°C for 5h. After aforementioned treatments, we observed the surface topography and the microstructures, and measured the extent of monoclinic phase, the nano-hardness and nano-modulus of the possible transformed zone and the flexural strength. Small-grit grinding changed the surface topography. The zirconia microstructure did not change obviously after surface treatments and thermal ageing; however, the glaze in contact with zirconia showed cracks after thermal ageing. Small-grit grinding did not induce a phase transformation but improved the flexural strength and ageing resistance. Glazing prevented zirconia from thermal ageing but severely diminished the flexural strength. The nano-hardness and nano-modulus of the surface layer were increased by ultrafine grinding. The results suggest that small-grit grinding is beneficial to the strength and ageing resistance of the super-translucent dental zirconia; however, glazing is not necessary and even impairs the strength for the super-translucent dental zirconia. This study is helpful to the researches about dental grinding tools and maybe useful for dentists to choose reasonable zirconia surface treatments. Copyright © 2017 Elsevier Ltd. All rights reserved.

  10. Gender, Math Confidence, and Grit: Relationships with Quantitative Skills and Performance in an Undergraduate Biology Course.

    Science.gov (United States)

    Flanagan, K M; Einarson, J

    2017-01-01

    In a world filled with big data, mathematical models, and statistics, the development of strong quantitative skills is becoming increasingly critical for modern biologists. Teachers in this field must understand how students acquire quantitative skills and explore barriers experienced by students when developing these skills. In this study, we examine the interrelationships among gender, grit, and math confidence for student performance on a pre-post quantitative skills assessment and overall performance in an undergraduate biology course. Here, we show that females significantly underperformed relative to males on a quantitative skills assessment at the start of term. However, females showed significantly higher gains over the semester, such that the gender gap in performance was nearly eliminated by the end of the semester. Math confidence plays an important role in the performance on both the pre and post quantitative skills assessments and overall performance in the course. The effect of grit on student performance, however, is mediated by a student's math confidence; as math confidence increases, the positive effect of grit decreases. Consequently, the positive impact of a student's grittiness is observed most strongly for those students with low math confidence. We also found grit to be positively associated with the midterm score and the final grade in the course. Given the relationships established in this study among gender, grit, and math confidence, we provide "instructor actions" from the literature that can be applied in the classroom to promote the development of quantitative skills in light of our findings. © 2017 K. M. Flanagan and J. Einarson. CBE—Life Sciences Education © 2017 The American Society for Cell Biology. This article is distributed by The American Society for Cell Biology under license from the author(s). It is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http

  11. Spent coffee grounds as air-propelled abrasive grit for weed control

    Science.gov (United States)

    Spent coffee grounds (SCG) represent a significant food waste residue. Value-added uses for this material would be beneficial. Gritty agricultural residues, such as corncob grit, can be employed as abrasive air-propelled agents for organically-compatible postemergence shredding of weed seedlings sel...

  12. Gritty people try harder: grit and effort-related cardiac autonomic activity during an active coping challenge.

    Science.gov (United States)

    Silvia, Paul J; Eddington, Kari M; Beaty, Roger E; Nusbaum, Emily C; Kwapil, Thomas R

    2013-05-01

    Grit, a recently proposed personality trait associated with persistence for long-range goals, predicts achievement in a wide range of important life outcomes. Using motivational intensity theory, the present research examined the physiological underpinnings of grit during an active coping task. Forty young adults completed the Short Grit Scale and worked on a self-paced mental effort task. Effort-related autonomic nervous system (ANS) activity was assessed using impedance cardiography, which yielded measures of sympathetic activity (pre-ejection period; PEP) and parasympathetic activity (respiratory sinus arrhythmia; RSA). Multilevel models revealed that people high on the Perseverance of Effort subscale showed autonomic coactivation: both PEP and RSA became stronger during the task, reflecting higher activity of both ANS divisions. The Consistency of Interest subscale, in contrast, predicted only weaker sympathetic activity (slower PEP). Taken together, the findings illuminate autonomic processes associated with how "gritty" people pursue goals, and they suggest that more attention should be paid to the facets' distinct effects. Copyright © 2013 Elsevier B.V. All rights reserved.

  13. Turkana Grits - a Cretaceous braided alluvial system in northern Kenya

    Energy Technology Data Exchange (ETDEWEB)

    Handford, C.R.

    1987-05-01

    Rather spotty but excellent exposures of the Cretaceous-age Turkana Grits occur near the western shore of Lake Turkana, northern Kenya. These very coarse to pebbly arkosic sandstones and sandy conglomerates were derived from and rest unconformably upon Precambrian metamorphic basement; they are overlain by late Tertiary basaltic flows that comprise much of the volcanics in the East African Rift Zone. The formation ranges up to 2000 ft thick in the Laburr Range. Several outcrops contain sauropod, crocodile, and tortoise remains as well as abundant trunks of petrified wood (Dryoxylon). Five major facies make up the Turkana Grits and record a major episode of continental fluvial deposition in basins flanked by Precambrian basement. Facies 1 is crudely stratified, cobble and boulder conglomerate (clast-supported); Facies 2 is crudely stratified pebble-cobble conglomerate and pebbly sandstone; Facies 3 is trough cross-bedded, very coarse sandstones containing fossils wood and vertebrate remains; Facies 4 is crudely stratified to massive sandstones with ironstone nodules; and Facies 5 is red, purple, and gray mudstone and mud shale with carbonate nodules. Facies 1 through 3 record deposition in proximal to medial braided-stream channel, longitudinal bar and dune complexes. Facies 4 is a lowland, hydromorphic paleosol, and Facies 5 represents overbank and abandoned channel-fill sedimentation in an alluvial plain.

  14. Students' Achievement in Math and Science: How Grit and Attitudes Influence?

    Science.gov (United States)

    Al-Mutawah, Masooma Ali; Fateel, Moosa Jaafar

    2018-01-01

    Many recent studies in the field of mathematics and science education have been studying the effect of non-cognitive factors in students' achievement such as emotions, attitudes, values, beliefs, motivation, anxiety and grit. For example, attitude has been an important area in science education, and there have been many attempts to measure…

  15. Establishment of a permeability/porosity equation for salt grit and damming materials

    International Nuclear Information System (INIS)

    Fein, E.; Mueller-Lyda, I.; Storck, R.

    1996-09-01

    The flow resistance of stowing and sealing materials hinder the transport of brines in an ultimate storage site in salt rock strata. This effect can be seen when brines flow into the storage areas and when contaminated brines are pressed out of the underground structure. The main variable determining flow resistance is permeability. The convergence process induced by rock pressure reduces the size of the available residual cavern and also the permeability of the stowing and sealing materials. In the long-term safety analyses carried out so far, the interdependence between porosity and permeability in the case of salt grit was commonly described by a power function. The present investigation uses the data available until the end of 1994 to derive an improved relation between permeability and porosity for salt grit stowing material. The results obtained show that the power function used until now is still applicable with only a slight modification of parameters. In addition, the statistical distribution functions of the correlated parameters of the permeability/porosity relation were determined for the first time for a probabilistic safety analysis. (orig./DG) [de

  16. Suplementasi Tepung Putih Telur untuk Memperbaiki Nilai Nutrisi Snack Ekstrusi Berbahan Grits Jagung

    Directory of Open Access Journals (Sweden)

    Budiman

    2009-12-01

    Full Text Available Snack is popular for children and adult. It could be made by extrusion process. Snack is low in protein content because it is made up of cereal such as rice and corn. On the basis of nutritional and functional properties, egg was used in food industries. The objectives of the research were to analyze the nutrient content and in vitro digestibility of extruded snack from corn grits which was supplemented by egg white powder as a protein source. Randomized complete block design was used in this experiment with production periods as block. Water content was not significantly different between treatments. Supplementation with 10% egg white powder significantly increased the fat content of extrusion snack. Protein content and digestible protein increased significantly as increasing of egg white powder added. Protein digestibility of products with 10%, 15%, and 20% of egg white addition was significantly lower than those added with 0% and 5% egg white. Protein, fat, and carbohydrate linkage had formed porous product. This linkage affects product nutritive content and digestibility.

  17. Positive Psychology and Familial Factors as Predictors of Latina/o Students' Psychological Grit

    Science.gov (United States)

    Vela, Javier C.; Lu, Ming-Tsan P.; Lenz, A. Stephen; Hinojosa, Karina

    2015-01-01

    Positive psychology is a useful framework to understand Latina/o students' experiences. In the current study, we examined how presence of meaning in life, search for meaning in life, hope, and family importance influenced 128 Latina/o college students' psychological grit. We used the Meaning in Life Questionnaire (MLQ), Subjective Happiness Scale,…

  18. Esterilização de farinha de subprodutos animais em esterilizador industrial Industrial sterilization of animal meal

    Directory of Open Access Journals (Sweden)

    Marcio Antônio Mazutti

    2010-03-01

    Full Text Available As farinhas de subprodutos animais se apresentam como uma fonte praticamente completa da maioria dos aminoácidos requeridos para uma alimentação equilibrada. Estas farinhas são amplamente usadas para corrigir as deficiências nutricionais, que ocorrem em outras matérias-primas para rações, como os farelos de origem vegetal. No entanto, constituem um ambiente favorável à proliferação de microrganismos, tanto durante o processamento quanto na estocagem. A Portaria SARC 002 de 13/02/2003 no Anexo I da Instrução Normativa Número 15 do Ministério da Agricultura, Pecuária e Abastecimento propõe que a etapa de esterilização das farinhas poderá ser realizada antes do processo de cocção dos subprodutos ou na própria farinha, contanto que seja empregado vapor saturado direto a uma temperatura mínima de 133 °C por um tempo mínimo de 20 minutos. Industrialmente, o que se deseja é obter um produto final com padrões higiênicos sanitários aceitáveis, com teor proteico o mais alto possível. Nesse sentido, o objetivo deste trabalho foi investigar diferentes estratégias de processamento da farinha de subprodutos de indústria de aves, observando aquela mais eficiente para a esterilização: se no subproduto antes da digestão ou se na própria farinha. Foram realizados testes em escala piloto com capacidade para 150 kg e em escala industrial com capacidade de 3.000 kg. O processo de esterilização em escala industrial apresentou um melhor desempenho comparado com o processo piloto. O teor de proteína aumentou em todos os testes e a digestibilidade final da farinha foi de aproximadamente 92%, o que eleva seu valor de mercado. Com relação à eliminação de microrganismos, o processo industrial foi eficiente, uma vez que não foi verificada contagem em nenhum dos três testes realizados.Animal meal obtained from animal offal offers a fairly complete source of most of the aminoacids required for a balanced animal diet. These

  19. Relationships among grit, academic performance, perceived academic failure, and stress in associate degree students.

    Science.gov (United States)

    Lee, Wincy Wing Sze

    2017-10-01

    The present study examined the relationships among grit, academic performance, perceived academic failure, and stress levels of Hong Kong associate degree students using path analysis. Three hundred and forty-five students from a community college in Hong Kong voluntarily participated in the study. They completed a questionnaire that measured their grit (operationalized as interest and perseverance) and stress levels. The students also provided their actual academic performance and evaluated their perception of their academic performance as a success or a failure. The results of the path analysis showed that interest and perseverance were negatively associated with stress, and only perceived academic failure was positively associated with stress. These findings suggest that psychological appraisal and resources are more important antecedents of stress than objective negative events. Therefore, fostering students' psychological resilience may alleviate the stress experienced by associate degree students or college students in general. Copyright © 2017 The Foundation for Professionals in Services for Adolescents. Published by Elsevier Ltd. All rights reserved.

  20. Organic geochemistry of petroleum seepages within the Jurassic Bencliff Grit, Osmington Mills, Dorset, UK

    Energy Technology Data Exchange (ETDEWEB)

    Watson, D.F.; Farrimond, P. [University of Newcastle upon Tyne (United Kingdom). Fossil Fuels and Environmental Geochemistry; Hindle, A.D. [Egdon Resources (UK) Ltd., Odiham (United Kingdom)

    2000-11-01

    Occurrences of oil within the Bencliff Grit at Osmington Mills were studied through an integration of organic geochemistry and a consideration of the geological setting. Oil-stained sandstones dominate the cliff outcrop with localized regions of particularly concentrated oil impregnation. A second 'live' seep of oil occurs where the Bencliff Grit beds pass below high tide level at Bran Point. Organic geochemical analyses showed both oils to be at least moderately biodegraded, with the oils in the cliff outcrop showing enrichment in polar constituents compared with the active seep. Multivariate statistical analysis of the molecular composition identified an enrichment in diasterane biomarkers in the oils of the live seep; this difference is ascribed to source and/or maturity differences. The oil within the outcrop is considered to represent the residual staining of an unroofed oil field, whilst the live seepage at Bran Point represents a migration pathway towards the eroded anticline. (Author)

  1. Effects of irrigation frequency and grit color on the germination of lodgepole pine seeds

    Science.gov (United States)

    Jeremy R. Pinto; R. Kasten Dumroese; Douglas R. Cobos

    2009-01-01

    Nursery cultural practices during germination can be highly variable between existing production facilities. Although nursery guidebooks suggest keeping seeds moist, there are no known scientific answers indicating what sufficient moisture levels are. This study objective was to characterize differing irrigation regimes and grit color choices on different germination...

  2. Individual versus Peer Grit: Influence on Later Individual Literacy Achievement of Dual Language Learners

    Science.gov (United States)

    O'Neal, Colleen R.

    2018-01-01

    The objective of this short-term longitudinal study was to examine individual versus classroom peer effects of grit on later individual literacy achievement in elementary school. The dual language learner, largely Latina/o sample included students from the 3rd through the 5th grades. Participants completed a literacy achievement performance task…

  3. The Relationships between Positive Thinking Skills, Academic Locus of Control and Grit in Adolescents

    Science.gov (United States)

    Çelik, Ismail; Sariçam, Hakan

    2018-01-01

    The main purpose of this study is to examine the possible relationships between academic locus of control, positive thinking skills and grit in high school students. The participants of the research are composed of 288 adolescents continuing their high school education from 4 different schools in Agri, Turkey, which were selected with convenient…

  4. Effect of grit blasting on the thermal cycling behavior of diffusion aluminide/YSZ TBCs

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Zhenhua, E-mail: zhxuciac@163.com; Huang, Guanghong; He, Limin; Mu, Rende; Wang, Kai; Dai, Jianwei

    2014-02-15

    Highlights: • TBCs including of CVD NiAl bond coat and EB-PVD YSZ ceramic coating with and without grit blasting process. • Grain boundary ridges are the sites for spallation damage initiation in aluminide/YSZ TBCs. • Ridges are removed, and no cavity formation and this damage initiation mode are suppressed. • Damage initiation and progression occurs at the bond coat to TGO interface leading to a buckling failure behavior. -- Abstract: Thermal barrier coating system (TBCs) including of chemical vapor deposited NiAl bond coat and electron beam physical vapor deposited Y{sub 2}O{sub 3}–stabilized-ZrO{sub 2} (YSZ) ceramic coating with and without grit blasting process were investigated. The phase structures, surface and cross-sectional morphologies, cyclic oxidation behaviors of these coatings were studied in detail. Grain boundary ridges form on the surface of aluminide bond coat prior to the deposition of the ceramic coating by EB-PVD, which are shown to be the sites for spallation damage initiation in aluminide/YSZ TBCs. When these ridges are removed, there is no cavity formation and this damage initiation mode is suppressed. Damage initiation and progression occurs at the bond coat to TGO interface leading to a buckling failure behavior. A buckle failure once started may be arrested when it runs into a region of high bond coat to TGO interface toughness. Thus, complete failure requires further loss in toughness of the bond coat to TGO interface with additional cycling. From the result of thermal cycling, an averaged four folds lifetime improvement can be achieved with samples after grit blasting of bond coat surface as compared with those samples existence in ridges on the bond coats’ surface.

  5. Interfacial microstructure and performance of brazed diamond grits with Ni-Cr-P alloy

    Energy Technology Data Exchange (ETDEWEB)

    Wang, C.Y. [Faculty of Mechanical and Electronic Engineering, Guangdong University of Technology, Guangzhou 510006 (China)], E-mail: cywang@gdut.edu.cn; Zhou, Y.M.; Zhang, F.L.; Xu, Z.C. [Faculty of Mechanical and Electronic Engineering, Guangdong University of Technology, Guangzhou 510006 (China)

    2009-05-12

    The reaction mechanism of the interface among diamond, commercial Ni-Cr-P alloy and steel substrate has been studied by optical microscopy, scanning electron microscope, X-ray diffraction and Raman spectroscopy. The reaction layers formed among diamond, brazing alloy and steel substrate produced good wettability of diamond grits for achieving better quality tools. The reaction layer between diamond and brazing alloy comprised a reaction layer of brazing alloy and a reaction layer of diamond. Cr{sub 7}C{sub 3} and Cr{sub 3}C{sub 2} formed in the reaction layer of brazing alloy was the main reason for improving the bonding strength of Ni-Cr alloy to the diamond grits. A reaction layer of diamond may be a graphitization layer formed on the surface of diamond under high temperature brazing. The reaction layer of brazing alloy and steel substrate was the co-diffusion of Ni, Cr and Fe between the brazing alloy and the steel substrate. The life and sharpness of brazed diamond boring drill bits fabricated in this study were superior to the electroplated one in the market owing to its high protrusion and bonding strength.

  6. Surface impurity removal from DIII-D graphite tiles by boron carbide grit blasting

    International Nuclear Information System (INIS)

    Lee, R.L.; Hollerbach, M.A.; Holtrop, K.L.; Kellman, A.G.; Taylor, P.L.; West, W.P.

    1993-11-01

    During the latter half of 1992, the DIII-D tokamak at General Atomics (GA) underwent several modifications of its interior. One of the major tasks involved the removal of accumulated metallic impurities from the surface of the graphite tiles used to line the plasma facing surfaces inside of the tokamak. Approximately 1500 graphite tiles and 100 boron nitride tiles from the tokamak were cleaned to remove the metallic impurities. The cleaning process consisted of several steps: the removed graphite tiles were permanently marked, surface blasted using boron carbide (B 4 C) grit media (approximately 37 μm. diam.), ultrasonically cleaned in ethanol to remove loose dust, and outgassed at 1000 degrees C. Tests were done using, graphite samples and different grit blaster settings to determine the optimum propellant and abrasive media pressures to remove a graphite layer approximately 40-50 μm deep and yet produce a reasonably smooth finish. EDX measurements revealed that the blasting technique reduced the surface Ni, Cr, and Fe impurity levels to those of virgin graphite. In addition to the surface impurity removal, tritium monitoring was performed throughout the cleaning process. A bubbler system was set up to monitor the tritium level in the exhaust gas from the grit blaster unit. Surface wipes were also performed on over 10% of the tiles. Typical surface tritium concentrations of the tiles were reduced from about 500 dpm/100 cm 2 to less than 80 dpm/100 cm 2 following the cleaning. This tile conditioning, and the installation of additional graphite tiles to cover a high fraction of the metallic plasma facing surfaces, has substantially reduced metallic impurities in the plasma discharges which has allowed rapid recovery from a seven-month machine opening and regimes of enhanced plasma energy confinement to be more readily obtained. Safety issues concerning blaster operator exposure to carcinogenic metals and radioactive tritium will also be addressed

  7. Chemical and Toxicological Fate of Fumonisin B1 during Extrusion Processing of Corn Grits

    Science.gov (United States)

    Two batches of flaking corn grits were prepared by growing Fusarium verticillioides to contain low and high levels of fumonisin B1 (FB1), Batch-1 at 9.7 ppm and Batch-2 at 50 ppm FB1 as determined by HPLC. These two batches were extruded (Batch-1E; Batch-2E) or extruded with 10% w/w glucose supplem...

  8. Flow and Grit by Design: Exploring Gamification in Facilitating Adherence to Swallowing Therapy.

    Science.gov (United States)

    Constantinescu, Gabriela; Rieger, Jana; Mummery, Kerry; Hodgetts, William

    2017-11-08

    Delivery of swallowing therapy is faced with challenges regarding access to in-clinic services and adherence to prescribed home programs. Mobile health (mHealth) technologies are being developed at a rapid pace to address these difficulties. Whereas some benefits to using these modern tools for therapy are obvious (e.g., electronic reminders), other advantages are not as well understood. One example is the potential for mHealth devices and apps to enhance adherence to treatment regimens. This article introduces a number of psychological concepts that relate to adherence and that can be leveraged by mHealth. Elements that contribute to flow (optimal experience) during an activity and those that reinforce grit (perseverance to achieve a long-term goal) can be used to engage patients in their own rehabilitation. The experience of flow can be targeted by presenting the rehabilitation exercise as an optimally challenging game, one that offers a match between challenge and ability. Grit can be supported by reinforcing routine and by varying the therapy experience using different games. A combination of hardware and software design approaches have the potential to transform uninteresting and repetitive activities, such as those that make up swallowing therapy regimens, into engaging ones. The field of gamification, however, is still developing, and gamified mHealth apps will need to withstand scientific testing of their claims and demonstrate effectiveness in all phases of outcome research.

  9. Torta de filtro como biofertilizante para produção de mudas de tomate industrial em diferentes substratos

    Directory of Open Access Journals (Sweden)

    Patrícia Coelho de Souza Barros

    2014-06-01

    Full Text Available A torta de filtro é uma alternativa promissora como matéria prima na complementação dos nutrientes essenciais para o desenvolvimento de mudas de hortaliças. Este trabalho objetivou avaliar o desenvolvimento de mudas de tomate industrial cultivadas em ambiente protegido, aplicando-se diferentes doses de torta de filtro, como biofertilizante, em substrato comercial e solo. Delineamento experimental foi de blocos casualizados com seis tratamentos e sete repetições totalizando 42 parcelas, para cada substrato. Cada unidade experimental consistia de copos com capacidade para 200 mL, nos quais foi incorporada a torta de filtro nas seguintes doses: 0, 2, 4, 6, 8 e 10 Mg ha-1. As variáveis respostas observadas foram: altura de plantas (cm; massa da matéria verde da parte aérea (g; massa seca da parte aérea (g. A utilização da torta de filtro tem efeitos positivos na produção de mudas de tomate industrial. A dose de torta de filtro adicionada ao substrato comercial que proporcionou o melhor desenvolvimento de mudas de tomate industrial é de 6,5 Mg ha-1. Com este ensaio, não foi possível atingir a dose ótima de torta de filtro, a qual representa o melhor desenvolvimento de mudas de tomate industrial, quando cultivado em solo, sugerindo o uso de doses maiores em experimentos posteriores.

  10. Grit or Honesty-Humility? New Insights into the Moderating Role of Personality between the Health Impairment Process and Counterproductive Work Behavior.

    Science.gov (United States)

    Ceschi, Andrea; Sartori, Riccardo; Dickert, Stephan; Costantini, Arianna

    2016-01-01

    It is acknowledged that chronic job demands may be depleting workers' stamina resulting in burnout conditions and ultimately causing further health problems. This relation, known as health impairment process, has recently been considered as a possible explanation for the emergence of counterproductive work behavior (CWB). The present work aims to examine the role of two personality traits (i.e., Grit and Honesty-Humility) in this process. The results, based on a sample of 208 private service sector employees, confirm the presence of a fully mediated process and show how Honesty-Humility positively moderates the relationship between job demands and exhaustion, whereas Grit has a negative effect on the relation between exhaustion and CWB. Implications for assessment procedure and hiring decisions are discussed.

  11. Grit or Honesty-Humility? New insights into the moderating role of personality between the health impairment process and counterproductive work behavior

    Directory of Open Access Journals (Sweden)

    Andrea Ceschi

    2016-12-01

    Full Text Available It is acknowledged that chronic job demands may be depleting workers’ stamina resulting in burnout conditions and ultimately causing further health problems. This relation, known as health impairment process, has recently been considered as a possible explanation for the emergence of counterproductive work behavior (CWB. The present work aims to examine the role of two personality traits (i.e., Grit and Honesty–Humility in this process. The results, based on a sample of 208 private service sector employees, confirm the presence of a fully mediated process and show how Honesty–Humility positively moderates the relationship between job demands and exhaustion, whereas Grit has a negative effect on the relation between exhaustion and CWB. Implications for assessment procedure and hiring decisions are discussed.

  12. Friction and Wear of Metals With a Single-Crystal Abrasive Grit of Silicon Carbide - Effect of Shear Strength of Metal

    National Research Council Canada - National Science Library

    Miyoshi, Kazuhisa

    1978-01-01

    An investigation was conducted to examine the removal and plastic deformation of metal as a function of the metal properties when the metal is in sliding contact with a single-crystal abrasive grit of silicon carbide...

  13. True Grit: Trait-level Perseverance and Passion for Long-term Goals Predicts Effectiveness and Retention among Novice Teachers.

    Science.gov (United States)

    Robertson-Kraft, Claire; Duckworth, Angela Lee

    2014-01-01

    Surprisingly little progress has been made in linking teacher effectiveness and retention to factors observable at the time of hire. The rigors of teaching, particularly in low-income school districts, suggest the importance of personal qualities that have so far been difficult to measure objectively. In this study, we examine the predictive validity of personal qualities not typically collected by school districts during the hiring process. Specifically, we use a psychological framework to explore how biographical data on grit, a disposition toward perseverance and passion for long-term goals, explains variance in novice teachers' effectiveness and retention. In two prospective, longitudinal samples of novice teachers assigned to schools in low-income districts (N = 154 and N = 307, respectively), raters blind to outcomes followed a 7-point rubric to rate grit from information on college activities and work experience extracted from teachers' résumés. We used independent-samples t-tests and binary logistic regression models to predict teacher effectiveness and retention from these grit ratings as well as from other information (e.g., SAT scores, college GPA, interview ratings of leadership potential) available at the time of hire. Grittier teachers outperformed their less gritty colleagues and were less likely to leave their classrooms mid-year. Notably, no other variables in our analysis predicted either effectiveness or retention. These findings contribute to a better understanding of what leads some novice teachers to outperform others and remain committed to the profession. In addition to informing policy decisions surrounding teacher recruitment and development, this investigation highlights the potential of a psychological framework to explain why some individuals are more successful than others in meeting the rigorous demands of teaching.

  14. Possibilities of structure stabilisation in saliniferous formations using salt grit as a filling material; Moeglichkeiten der Gefuegestabilisierung von Salzgrusversatz

    Energy Technology Data Exchange (ETDEWEB)

    Becker, Sebastian; Gruner, Matthias; Mischo, Helmut [TU Bergakademie Freiberg (Germany). Inst. fuer Bergbau und Spezialtiefbau

    2014-09-15

    The final disposal of high-active wastes in deep geological formations is an issue of great national and international import. On account of its good thermal conductivity and creep capability much research is currently focussed on sand as a host rock material. After the emplacement of wastes in abandoned mining cavities these must be sealed up to prevent fluids from coming into contact with the wastes. This must be done using materials that are either native or similar to the materials of the host formation. A particularly suitable material in the case of saliniferous formations is salt grit. Up to this point investigations have primarily been focused on preparing a suitable salt grit material and the rheological properties of the binding agent. This article presents and interprets the results of preliminary experiments on the miscibility of salt grit and binding agent suspensions. The MgO and CaSO{sub 4}-based binding agent systems analysed proved to be suitable. Among the MgO binding agents a composition of 3:1:8 was found to be more suitable than one of 5:1:8 on account of its lower initial viscosity. This reduces the amount of mixing required for wetting the material across all grain sizes, improving the chances of success. In the case of the two semihydrates of CaSO{sub 4} both the α and the β semihydrate proved suitable. This is due to a low fluid content which still also allows for a sufficiently low viscosity of the binding agent suspensions.

  15. Estudo comparativo da resistência do fio de algodão obtido em fiação piloto e em fiação industrial Correlation between laboratory and industrial cotton yarn strength

    Directory of Open Access Journals (Sweden)

    José Fernando Lazzarini

    1972-01-01

    Full Text Available O estudo de 81 pares de valores de resistência do fio de algodão 22/1 produzido em fiação piloto (X e em fiação industrial (Y mostrou que entre os dois processos existe uma correlação r= 0,563**. A equação de regressão é da forma Y= 611,631 + 0,486 X. Ficou demonstrado que equações calculadas para nove linhagens em cada localidade fornecem estimativas mais precisas da resistência do fio do que a equação geral. O coeficiente de correlação mais alto (r=0,924** foi encontrado para a localidade de Campinas.A yarn strength correlation analysis for the 22/1 yarn spun through a Miniature Spinning Plant (X and the yarn of same count spun through an industrial equipment (Y was carried out for 81 pairs of observations. The correlation coeficient between the two processes showed to be r = 0.563 **. The regression equation is of the form: Y = 611.631 + 0.486X. It was showed that the equations to predicted yarn strength, calculated for 9 pairs of values in each location, give better estimations than the general equation calculated for 81 pairs in 9 locations. The highest correlation coefficient (r = 0.944 ** was found for the locality of Campinas.

  16. The Effect of Moisture Content of Maize Grits on Physicochemical Properties of Its Puffed Food Products Properties of Its Puffed Food Products

    Directory of Open Access Journals (Sweden)

    S. Sharifi

    2016-02-01

    Full Text Available In this study the effect of different levels of moisture content of maize grits (10, 13, 16 and 19% as an attribute of physicochemical properties of extruder-derived puffed products, was investigated. The results showed that with increasing maize grits' moisture content, water absorption index (WAI and water solubility index (WSI were decreased. Moreover, with changing in feed moisture content from 10 to 16%, the volume and sectional expansion index (SEI increased but further increase of moisture content to 19% caused a reduction in these parameters. The textural tests also revealed that with increase in moisture content, the compression energy (Nmm, maximum force (N and time to achieve the first major peak (s were increased but the number of peaks was decreased. With increase in the moisture content, specific mechanical energy (SME was decreased, due probably to the reduction in the viscosity of melt. With increase in the moisture content the L and b values were increased but the value of the samples were decreased due to the reduction of Maillard reaction rate. Our data confirms that the moisture content of maize grits may play an important role in the quality of produced extruded snacks and a high quality product can be achieved by optimizing this parameter. In this research, the maximum volume of the extruder product was obtained in 16% of moisture level.

  17. Grit and the Information Systems Student: A Discipline-Specific Examination of Perseverance and Passion for Long Term Goals

    Science.gov (United States)

    Brooks, Nita G.; Seipel, Scott J.

    2018-01-01

    Grit has been highlighted in recent research as a distinct trait believed to be associated with performance and success factors above and beyond those explained by cognitive ability. It focuses on the dedication required to meet long-term goals and is represented by two subscales: consistency of interest and perseverance of effort. The overall…

  18. Sogenbits: Industry 4.0 on muutunud ülioluliseks / Emöke Sogenbits ; [üles kirjutanud] Harro Puusild

    Index Scriptorium Estoniae

    Sogenbits, Emöke, 1962-

    2017-01-01

    "Industry 4.0 on minu jaoks muutunud ülioluliseks,” rääkis Hanza Mechanics Tartu tegevjuht Emöke Sogenbits Tehnoloogia Arenduskeskuse IMECC korraldatud seminaril “Robotid ja automatiseerimine”

  19. Avaliação tecnológica de painéis MDF de madeira de Eucalyptus grandis confeccionados em laboratório e em linha de produção industrial

    Directory of Open Access Journals (Sweden)

    Ugo Leandro Belini

    2010-09-01

    Full Text Available Chapas MDF de fibras da madeira de Eucalyptus grandis foram confeccionadas em laboratório e em linha de produção industrial e determinadas suas propriedades anatômicas, físicas e mecânicas. O desfibramento da madeira provocou o rompimento transversal da parede das fibras. Os painéis MDF obtidos em linha de produção apresentaram menores valores de inchamento e de absorção e melhores propriedades mecânicas para módulo de ruptura, módulo de elasticidade e resistência à tração superficial. Para os painéis MDF confeccionados em laboratório, verificou-se correlação estatisticamente significativa entre módulo de ruptura e de elasticidade, densidade média e resistência à tração perpendicular e inchamento e absorção. Para os painéis MDF confeccionados em linha de produção industrial, verificaram-se as mesmas tendências, sem significância estatística. A avaliação dos parâmetros de qualidade de painéis MDF de eucalipto confeccionados em laboratório e em linha de produção visa a calibrar as variáveis para a obtenção de chapas MDF em pequena escala e melhorar a precisão das análises de rotina de controle de qualidade bem como nas informações apresentadas em publicações científicas.

  20. Energized CO{sub 2} dry ice blast cleaning firmly grounded in the Canadian electrical industry

    Energy Technology Data Exchange (ETDEWEB)

    Lindsay, K.

    1999-02-01

    Development and use of energized carbon dioxide dry ice blast technology for cleaning electrical distribution system components by Oakville Hydro and Milton Hydro (both in Ontario) is discussed. The technology was developed by Alpheus Cleaning Technologies of California and Puget Sound Power and Light Company after a two-year study that commenced in 1991, and has been supplied in Canada by Wickens Industrial Ltd., since 1993 for cleaning various industrial and non-energized electrical applications in the automotive, printing , food processing and other manufacturing industries and hydro generating facilities. The unique cleaning dynamics of this technology allow for the removal of contaminants that are much more stubborn than those encountered in pad-mounted switchgear and other electrical apparatus. Dry ice pellets, by expanding to 400 times their solid state on impact, create a flushing action that helps to remove contaminants. No grit or solvents are required and the process is non-toxic. In using the process workers wear fire retardant clothing, 40 kV-Class 4 rubber gloves and full face shields. Dielectric tests are performed routinely to confirm the dielectric integrity of the spray wand components. A two stage inspection/trouble report is completed on every job. Use of this technology eliminates power interruptions to customers, improves system reliability and safety, reduces cleaning time to a minimum, and eliminated the need for reclamation of grit or solvent containment.

  1. Net Energy, CO2 Emission and Land-Based Cost-Benefit Analyses of <em>Jatropha> em>Biodiesel: A Case Study of the Panzhihua Region of Sichuan Province in China

    Directory of Open Access Journals (Sweden)

    Xiangzheng Deng

    2012-06-01

    Full Text Available Bioenergy is currently regarded as a renewable energy source with a high growth potential. Forest-based biodiesel, with the significant advantage of not competing with grain production on cultivated land, has been considered as a promising substitute for diesel fuel by many countries, including China. Consequently, extracting biodiesel from <em>Jatropha> curcasem> has become a growing industry. However, many key issues related to the development of this industry are still not fully resolved and the prospects for this industry are complicated. The aim of this paper is to evaluate the net energy, CO2 emission, and cost efficiency of <em>Jatropha> biodiesel as a substitute fuel in China to help resolve some of the key issues by studying data from this region of China that is well suited to growing <em>Jatropha>. Our results show that: (1 <em>Jatropha> biodiesel is preferable for global warming mitigation over diesel fuel in terms of the carbon sink during <em>Jatropha> tree growth. (2 The net energy yield of <em>Jatropha> biodiesel is much lower than that of fossil fuel, induced by the high energy consumption during <em>Jatropha> plantation establishment and the conversion from seed oil to diesel fuel step. Therefore, the energy efficiencies of the production of <em>Jatropha> and its conversion to biodiesel need to be improved. (3 Due to current low profit and high risk in the study area, farmers have little incentive to continue or increase <em>Jatropha> production. (4 It is necessary to provide more subsidies and preferential policies for <em>Jatropha> plantations if this industry is to grow. It is also necessary for local government to set realistic objectives and make rational plans to choose proper sites for <em>Jatropha> biodiesel development and the work reported here should assist that effort. Future research focused on breading high-yield varieties, development of efficient field

  2. Real time EM waves monitoring system for oil industry three phase flow measurement

    International Nuclear Information System (INIS)

    Al-Hajeri, S; Wylie, S R; Shaw, A; Al-Shamma'a, A I

    2009-01-01

    Monitoring fluid flow in a dynamic pipeline is a significant problem in the oil industry. In order to manage oil field wells efficiently, the oil industry requires accurate on line sensors to monitor the oil, gas, and water flow in the production pipelines. This paper describes a non-intrusive sensor that is based on an EM Waves cavity resonator. It determines and monitors the percentage volumes of each phase of three phase (oil, gas, and water) in the pipeline, using the resonant frequencies shifts that occur within an electromagnetic cavity resonator. A laboratory prototype version of the sensor system was constructed, and the experimental results were compared to the simulation results which were obtained by the use of High Frequency Structure Simulation (HFSS) software package.

  3. Wood-derived-biochar combined with compost or iron grit for in situ stabilization of Cd, Pb, and Zn in a contaminated soil.

    Science.gov (United States)

    Oustriere, Nadège; Marchand, Lilian; Rosette, Gabriel; Friesl-Hanl, Wolfgang; Mench, Michel

    2017-03-01

    In situ stabilization of Cd, Pb, and Zn in an Austrian agricultural soil contaminated by atmospheric depositions from a smelter plant was assessed with a pine bark chip-derived biochar, alone and in combination with either compost or iron grit. Biochar amendment was also trialed in an uncontaminated soil to detect any detrimental effect. The pot experiment consisted in ten soil treatments (% w/w): untreated contaminated soil (Unt); Unt soil amended with biochar alone (1%: B1; 2.5%: B2.5) and in combination: B1 and B2.5 + 5% compost (B1C and B2.5C), B1 and B2.5 + 1% iron grit (B1Z and B2.5Z); uncontaminated soil (Ctrl); Ctrl soil amended with 1 or 2.5% biochar (CtrlB1, CtrlB2.5). After a 3-month reaction period, the soil pore water (SPW) was sampled in potted soils and dwarf beans were grown for a 2-week period. The SPW Cd, Pb, and Zn concentrations decreased in all amended-contaminated soils. The biochar effects increased with its addition rate and its combination with either compost or iron grit. Shoot Cd and Zn removals by beans were reduced and shoot Cd, Pb, and Zn concentrations decreased to common values in all amended soils except the B1 soil. Decreases in the SPW Cd/Pb/Zn concentrations did not improve the root and shoot yields of plants as compared to the Ctrl soil.

  4. DOMINAÇÃO E REPRESSÃO DA SOCIEDADE INDUSTRIAL AVANÇADA EM HOMEM UNIDIMENSIONAL DE HERBERT MARCUSE

    Directory of Open Access Journals (Sweden)

    Ramom Gomes da Silva

    2017-08-01

    Full Text Available Este trabalho apresenta uma reflexão acerca dos instrumentos de dominação e repressão da sociedade industrial avançada. A partir da leitura da primeira parte do livro Ideologia da sociedade industrial: O homem unidimensional, Herbert Marcuse analisa a sociedade industrial avançada e as tendências do capitalismo tardio expondo as novas formas de controle e dominação dos indivíduos na contemporaneidade. Os meios de dominação do capitalismo avançado têm-se mostrado mais eficientes e eficazes do que antigos regimes baseados na violência explícita, isto é, sem uso de um terror aberto, tem o domínio das esferas da existência humana, sejam elas públicas ou privadas. Esses mecanismos de controles proporcionaram a integração entre o pensamento e o comportamento dos indivíduos, de tal modo que o sujeito sente-se livre em situação de não liberdade, situação em que  necessidades impostas são aceitas e ainda repassadas às gerações seguintes sem o menor questionamento.

  5. Diamond growth on an array of seeds: The revolution of diamond production

    Energy Technology Data Exchange (ETDEWEB)

    Sung, James C. [KINIK Company, 64, Chung-San Rd., Ying-Kuo, Taipei Hsien 239, Taiwan (China) and National Taiwan University, Taipei 106, Taiwan (China) and National Taipei University of Technology, Taipei 106, Taiwan (China)]. E-mail: sung@kinik.com.tw; Sung, Michael [Massachusetts Institute of Technology, Cambridge, MA (United States); Sung, Emily [Johnson and Johnson, Freemont, CA (United States)

    2006-03-01

    The consumption of saw diamond grits is a measure of a nation's constructional activities. The per capita consumption for the world is about 0.7 carats in 2004, and in China, about 3 carats. The manufacture of large saw diamond grits requires stringent control of pressure and temperature that only a few companies can master. However, with the implementation of a novel diamond seeding technology, large saw diamond grits of extreme quality can be mass produced. With this breakthrough, the prices of saw grit will plummet in the near future that should benefit the constructional industry worldwide. Moreover, electronic or thermal grade of large diamond crystals may be produced for applications in semiconductor, electronic or optical industry.

  6. Diamond growth on an array of seeds: The revolution of diamond production

    International Nuclear Information System (INIS)

    Sung, James C.; Sung, Michael; Sung, Emily

    2006-01-01

    The consumption of saw diamond grits is a measure of a nation's constructional activities. The per capita consumption for the world is about 0.7 carats in 2004, and in China, about 3 carats. The manufacture of large saw diamond grits requires stringent control of pressure and temperature that only a few companies can master. However, with the implementation of a novel diamond seeding technology, large saw diamond grits of extreme quality can be mass produced. With this breakthrough, the prices of saw grit will plummet in the near future that should benefit the constructional industry worldwide. Moreover, electronic or thermal grade of large diamond crystals may be produced for applications in semiconductor, electronic or optical industry

  7. The Development of Expanded Snack Product Made from Pumpkin Flour-Corn Grits: Effect of Extrusion Conditions and Formulations on Physical Characteristics and Microstructure.

    Science.gov (United States)

    Nor, Norfezah Md; Carr, Alistair; Hardacre, Allan; Brennan, Charles S

    2013-05-14

    Pumpkin products confer natural sweetness, desirable flavours and β-carotene, a vitamin A precursor when added as ingredients to extruded snacks. Therefore, a potential use for dried pumpkin flour is as an ingredient in ready-to-eat (RTE) snack foods. Growth in this market has driven food manufacturers to produce a variety of new high value snack foods incorporating diverse ingredients to enhance the appearance and nutritional properties of these foods. Ready-to-eat snacks were made by extruding corn grits with 5%, 10%, 15% and 20% of pumpkin flour. Snacks made from 100% corn grits were used as control products for this work. The effect of formulation and screw speeds of 250 rpm and 350 rpm on torque and specific mechanical energy (SME, kWh/kg), physical characteristics (expansion ratio, bulk density, true density and hardness) and the microstructure of the snacks were studied. Increasing the screw speed resulted in a decrease of torque for all formulations. When pumpkin flour was added the specific mechanical energy (SME) decreased by approximately 45%. Increasing the percentage of pumpkin flour at the higher screw speed resulted in a harder texture for the extruded products. X-ray tomography of pumpkin flour-corn grit snacks showed that increased levels of pumpkin flour decreased both the bubble area and bubble size. However, no significant differences ( p > 0.05) in bubble wall thickness were measured. By understanding the conditions during extrusion, desirable nutritional characteristics can be incorporated while maximizing expansion to make a product with low bulk density, a fine bubble structure and acceptable organoleptic properties.

  8. The Development of Expanded Snack Product Made from Pumpkin Flour-Corn Grits: Effect of Extrusion Conditions and Formulations on Physical Characteristics and Microstructure

    Directory of Open Access Journals (Sweden)

    Norfezah Md Nor

    2013-05-01

    Full Text Available Pumpkin products confer natural sweetness, desirable flavours and β-carotene, a vitamin A precursor when added as ingredients to extruded snacks. Therefore, a potential use for dried pumpkin flour is as an ingredient in ready-to-eat (RTE snack foods. Growth in this market has driven food manufacturers to produce a variety of new high value snack foods incorporating diverse ingredients to enhance the appearance and nutritional properties of these foods. Ready-to-eat snacks were made by extruding corn grits with 5%, 10%, 15% and 20% of pumpkin flour. Snacks made from 100% corn grits were used as control products for this work. The effect of formulation and screw speeds of 250 rpm and 350 rpm on torque and specific mechanical energy (SME, kWh/kg, physical characteristics (expansion ratio, bulk density, true density and hardness and the microstructure of the snacks were studied. Increasing the screw speed resulted in a decrease of torque for all formulations. When pumpkin flour was added the specific mechanical energy (SME decreased by approximately 45%. Increasing the percentage of pumpkin flour at the higher screw speed resulted in a harder texture for the extruded products. X-ray tomography of pumpkin flour-corn grit snacks showed that increased levels of pumpkin flour decreased both the bubble area and bubble size. However, no significant differences (p > 0.05 in bubble wall thickness were measured. By understanding the conditions during extrusion, desirable nutritional characteristics can be incorporated while maximizing expansion to make a product with low bulk density, a fine bubble structure and acceptable organoleptic properties.

  9. Poverty and the Ideological Imperative: A Call to Unhook from Deficit and Grit Ideology and to Strive for Structural Ideology in Teacher Education

    Science.gov (United States)

    Gorski, Paul C.

    2016-01-01

    In this article I explore the educational equity implications of three popular ideological positions that drive teachers' and teacher educators' understandings of, and responses to, poverty and economic injustice in schools: deficit ideology, grit ideology, and structural ideology. The educator's ideological position, I illustrate, determines…

  10. Reestruturação industrial, sindicato e território – Alternativas políticas em momentos de crise na região do ABC em São Paulo – Brasil

    Directory of Open Access Journals (Sweden)

    José Ricardo Ramalho

    2012-12-01

    Full Text Available Este texto propõe-se discutir os efeitos sociais e políticos de crises e transformações econômicas sobre a história de distritos industriais, constituídos a partir da concentração de empresas de grande porte e de seus desdobramentos em termos de redes de pequenas e médias empresas. Tomando como exemplo a trajetória do principal distrito industrial brasileiro, consolidado a partir de meados do século xx em uma região que ficou conhecida como ABC, e no contexto de um país em busca de uma vocação manufatureira, pretendemos contribuir para o debate sobre o papel dos territórios e seus atores sociais, em especial os trabalhadores e seus sindicatos, em situações de crise da produção e do emprego, relacionadas à dinâmica das cadeias produtivas em uma economia mundializada.

  11. Characterization of steel grit recovered from ornamental rocks waste by magnetic separation

    International Nuclear Information System (INIS)

    Junca, E.; Telles, V.B.; Rodrigues, G.F.; Oliveira, J.R. de; Tenorio, J.A.S.

    2010-01-01

    The aim of this work is characterization of steel grit recovered from ornamental rock waste by magnetic separation. The magnetic separation was realized in three steps: first, using a high intensity wet magnetic separator, which used only the remaining magnetic field of equipment. In the second step, the magnetic material obtained in the first phase was subjected to a new manual magnetic separation using rare earth magnets. In a third step, magnetic material obtained with rare earth magnets was subjected to manual magnetic separation using ferrite magnets. After the magnetic separation, the material was sent to characterization which was obtained by chemical analysis, scanning electron microscopy, X-ray diffraction and size analysis. The size analysis showed that the concentrate range from 0,5 to 563,67 μm with 4 wt.% over 100 μm and content metallic iron of 93 wt%. (author)

  12. Utilização de efluente tratado em complexo industrial automotivo

    Directory of Open Access Journals (Sweden)

    Sandro Carlos Pohl

    Full Text Available RESUMO Neste trabalho, realizaram-se modificações nos sistemas produtivo e de tratamento de efluentes em um complexo industrial automotivo a fim de possibilitar a utilização do efluente tratado no sistema de torres de resfriamento. Inicialmente, realizou-se um balanço hídrico nos processos industriais para determinar o consumo de água e analisou-se a qualidade do efluente tratado quanto aos parâmetros físico-químicos em dois pontos do sistema de tratamento de efluentes: no decantador secundário (P1 do tratamento físico-químico e na saída da lagoa de polimento (P2. Essas análises mostraram que o efluente tratado no decantador secundário não tem capacidade de atender às especificações da água de circulação das torres de resfriamento sem a realização de muitas alterações em seu tratamento, optando-se pela utilização do efluente tratado na saída da lagoa de polimento após modificações, como: alteração na concentração de ácido fosfórico e de ácido nítrico da solução de limpeza dos tanques de fosfatização, elevação em 50% da capacidade de aeração da lagoa aerada e troca do coagulante sulfato de alumínio pelo cloreto férrico no tratamento físico-químico. Assim, os parâmetros do efluente tratado na lagoa de polimento aproximaram-se aos parâmetros especificados para água de torres de resfriamento. A introdução desse efluente na proporção de 40% do volume da água de circulação na torre de resfriamento resultou em elevação do ciclo de dureza e redução no ciclo de sílica. A utilização de um filtro abrandador na saída da lagoa de polimento proporcionou a redução dos parâmetros de qualidade da água para valores similares aos da água de recirculação nas torres de resfriamento.

  13. Development of 101 Gene-based Single Nucleotide Polymorphism Markers in Sea Cucumber, <em>Apostichopus japonicusem>>

    Directory of Open Access Journals (Sweden)

    Wei Lu

    2012-06-01

    Full Text Available Single nucleotide polymorphisms (SNPs are currently the marker of choice in a variety of genetic studies. Using the high resolution melting (HRM genotyping approach, 101 gene-based SNP markers were developed for <em>Apostichopus japonicusem>, a sea cucumber species with economic significance for the aquaculture industry in East Asian countries. HRM analysis revealed that all the loci showed polymorphisms when evaluated using 40 <em>A. japonicusem> individuals collected from a natural population. The minor allele frequency ranged from 0.035 to 0.489. The observed and expected heterozygosities ranged from 0.050 to 0.833 and 0.073 to 0.907, respectively. Thirteen loci were found to depart significantly from Hardy–Weinberg equilibrium (HWE after Bonferroni corrections. Significant linkage disequilibrium (LD was detected in one pair of markers. These SNP markers are expected to be useful for future quantitative trait loci (QTL analysis, and to facilitate marker-assisted selection (MAS in <em>A. japonicusem>.

  14. Sensibilidade a cobre, estreptomicina e oxitetraciclina em Xanthomonas spp. associadas à mancha-bacteriana do tomate para processamento industrial

    Directory of Open Access Journals (Sweden)

    Quezado-Duval Alice Maria

    2003-01-01

    Full Text Available Apesar de amplamente empregados em lavouras de tomate para processamento industrial no Brasil, fungicidas cúpricos e antibióticos registrados para uso agrícola nem sempre resultam em controle eficiente das bacterioses que afetam a cultura. O aparecimento de estirpes resistentes é uma das causas dessa baixa eficiência. Avaliou-se, in vitro, a sensibilidade a cobre, estreptomicina e oxitetraciclina de 389 isolados de Xanthomonas spp. associadas à mancha-bacteriana do tomateiro, sendo 92 de X. axonopodis pv. vesicatoria (60 do grupo "A"/raça T1 e 32 do "C"/raça T3, 93 de X. vesicatoria (grupo "B"/raça T2 e 204 de X. gardneri (grupo "D"/raça T2. Os isolados foram obtidos de plantas doentes em campos comerciais de tomate para processamento industrial nos estados de Goiás, Minas Gerais, Pernambuco e Bahia, nos anos de 1995 a 1998 e em 2000. Alíquotas de 5 ml de suspensões bacterianas foram depositadas em meio Nutriente-Ágar suplementado com sulfato de cobre, nas concentrações de 50 e 200 µg/ml; sulfato de estreptomicina, a 25 e 200 µg/ml e cloridrato de oxitetraciclina, a 25 µg/ml. Nenhum isolado foi resistente a oxitetraciclina, como também nenhum foi resistente ao cobre na concentração de 200 µg/ml do sulfato de cobre. No entanto, houve diferença entre isolados quanto à sensibilidade ao sulfato de cobre na concentração de 50 µg/ml e ao sulfato de estreptomicina nas duas concentrações empregadas. As freqüências de isolados de X. gardneri, X. axonopodis pv. vesicatoria (grupos "A" e "C" e X. vesicatoria resistentes à estreptomicina (25 µg/ml do produto usado foram, respectivamente, 98%, 38% e 2%, ao passo que, ao cobre, foram, respectivamente, 48%, 4% e 74%. Todos os isolados do grupo "C" foram sensíveis à estreptomicina e 97% sensíveis ao cobre.

  15. Influência da granulometria da matéria-prima na expansão de extrusados de milho

    OpenAIRE

    Mikalouski,Flavianny Brencis da Silva; Monteiro,Antonio Roberto Giriboni; Marques,Diego Rodrigues; Monteiro,Claudia Cirineo Ferreira; Benossi,Livia

    2014-01-01

    Na produção de extrusados de milho, a indústria usualmente emprega o grits, que consiste no milho limpo, degerminado e moído em granulometria média. Entretanto, visando à redução dos custos de produção, fabricantes de snacks extrusados de milho vêm utilizando o fubá em substituição ao grits, devido ao menor custo apresentado por este. O objetivo deste trabalho foi verificar a influência da granulometria do milho sobre o índice de expansão dos snacks, sua textura e aceitação sensorial. Para is...

  16. Modelo para a gestão da cultura de segurança do trabalho em organizações industriais Model for safety culture management in industrial organizations

    Directory of Open Access Journals (Sweden)

    Anastácio Pinto Gonçalves Filho

    2012-01-01

    Full Text Available A pesquisa apresentada neste artigo teve o objetivo de desenvolver e validar um modelo para identificar o estágio de maturidade da cultura de segurança do trabalho em organizações industriais. Com a finalidade de validá-lo, o modelo desenvolvido foi aplicado em 23 empresas químicas e petroquímicas do Polo Industrial de Camaçari, Bahia, Brasil. Foram utilizados os seguintes métodos para validação do modelo desenvolvido: 1 entrevistas individuais, 2 evidências documentais, 3 entrevistas com grupo de gerentes e 4 aplicação do modelo em outro ramo de atividade diferente do ramo químico e petroquímico. O principal resultado obtido foi que o modelo desenvolvido foi validado e pode ser utilizado para identificar o estágio de maturidade da cultura de segurança em organizações industriais.The research presented in this article had the objective to develop and validate a model to identify safety culture maturity in industrial organizations. In order to validate it, the developed model was applied in 23 chemical and petrochemical companies in Camaçari, Bahia, Brazil. The following methods were used: 1. individual interviews; 2. interview with groups of safety managers; 3. documental evidence and 4. application of the model in another industrial activity. Results demonstrated that the developed model was validated and it is suitable to identify safety culture maturity in industrial organizations.

  17. A study of the strategic alliance for EMS industry: the application of a hybrid DEA and GM (1, 1) approach.

    Science.gov (United States)

    Wang, Chia Nan; Nguyen, Nhu Ty; Tran, Thanh Tuyen; Huong, Bui Bich

    2015-01-01

    Choosing a partner is a critical factor for success in international strategic alliances, although criteria for partner selection vary between developed and transitional markets. This study aims to develop effective methods to assist enterprise to measure the firms' operation efficiency, find out the candidate priority under several different inputs and outputs, and forecast the values of those variables in the future. The methodologies are constructed by the concepts of Data Envelopment Analysis (DEA) and grey model (GM). Realistic data in four consecutive years (2009-2012) a total of 20 companies of the Electronic Manufacturing Service (EMS) industry that went public are completely collected. This paper tries to help target company-DMU1-to find the right alliance partners. By our proposed approach, the results show the priority in the recent years. The research study is hopefully of interest to managers who are in manufacturing industry in general and EMS enterprises in particular.

  18. Chemical Composition of Essential Oils of <em>Litsea cubebaem> Harvested from Its Distribution Areas in China

    Directory of Open Access Journals (Sweden)

    Qinqin Cui

    2012-06-01

    Full Text Available <em>Litsea cubebaem> (Lour. Pers. is a promising industrial crop with fruits rich in essential oils. The chemical composition of essential oils of <em>L. cubebaem> (EOLC were determined for fruits harvested from eight regions in China. The overall essential oil content, obtained by hydrodistillation and analyzed by gas chromatography–mass spectrometry (GC-MS, ranged from 3.04% to 4.56%. In total, 59 compounds were identified, the dominant components being monoterpenes (94.4–98.4%, represented mainly by neral and geranial (78.7–87.4%. D-Limonene was unexpectedly a lesser constituent (0.7–5.3% in fruits, which differed from previous reports (6.0–14.6%. Several components were only detected in certain regions and compounds such as <em>o>-cymene and eremophilene have never before been reported in EOLC. These results demonstrate significant regional variation in the chemical composition of EOLC. This investigation provides important information with regard to the bioactivity, breeding work and industrial applications of <em>L. cubebaem>.

  19. Qualidade do palmito da palmeira real em conserva Industrial adaptability of the heart of palm from Archontophoenix alexandrae and A. cunninghamiana

    Directory of Open Access Journals (Sweden)

    Shirley Aparecida Garcia Berbari

    2008-12-01

    Full Text Available A pesquisa teve como objetivo avaliar o aproveitamento industrial e a qualidade do palmito da palmeira Real Australiana (Archontophoenix alexandrae e A. cunninghamiana em comparação aos palmitos das palmeiras Açaí (Euterpe oleracea e Pupunha (Bactris gasipaes. O palmito foi processado como conserva acidificada e pasteurizada e submetido às análises de comprimento e diâmetro dos toletes, peso bruto, líquido e drenado, espaço livre, vácuo, pH, avaliação microbiológica, cor e textura objetivas e avaliação sensorial quanto à cor, aparência, textura, sabor e preferência geral. Os resultados da pesquisa mostraram que o palmito da palmeira Real é adequado para processamento em forma de conserva acidificada e pasteurizada, apresentando características sensoriais semelhantes às das outras variedades. Do ponto de vista da estabilidade ao armazenamento, as análises físico-químicas e microbiológicas mostraram que o palmito da palmeira Real em conserva se apresentou estável durante o período de doze meses de armazenamento. Pode-se afirmar então, que a palmeira Real Australiana apresenta boa qualidade em termos de industrialização na forma de palmito em conserva acidificada e pasteurizada.The objective of this research was to evaluate the industrial adaptability of the heart of palm from Archontophoenix alexandrae e A. cunninghamiana in comparison with "Açaí" (Euterpe oleracea and "Pupunha" (Bactris gasipaes hearts. The heart of palm was canned acidified and pasteurized and analyzed in terms of stems length and diameter, the gross, net and drained weight, headspace; pH; vacuum; microbiological evaluation, objective color and texture and sensorial evaluation of color, appearance, texture, taste and general preference. The results showed that Australian royal palm is adequate for the process of acidified canning and pasteurization since it presented sensorial characteristics similar to other varieties. During 12 months of storage

  20. Influência da granulometria da matéria-prima na expansão de extrusados de milho

    Directory of Open Access Journals (Sweden)

    Flavianny Brencis da Silva Mikalouski

    2014-03-01

    Full Text Available Na produção de extrusados de milho, a indústria usualmente emprega o grits, que consiste no milho limpo, degerminado e moído em granulometria média. Entretanto, visando à redução dos custos de produção, fabricantes de snacks extrusados de milho vêm utilizando o fubá em substituição ao grits, devido ao menor custo apresentado por este. O objetivo deste trabalho foi verificar a influência da granulometria do milho sobre o índice de expansão dos snacks, sua textura e aceitação sensorial. Para isso, foram utilizadas três diferentes granulometrias do milho moído, sendo: grits, fubá mimoso e fubá mimoso fino. O índice de expansão radial foi analisado pela razão entre o diâmetro médio do snack e o diâmetro da matriz utilizada, a textura foi analisada em texturômetro, modelo Texture Analyser TA-XT Plus (Stable Micro Systens. A partir dos resultados obtidos, houve a confirmação da influência da granulometria nos parâmetros físicos, entretanto, não ocorreu alteração na aceitação do produto, indicando, desta forma, ser viável a substituição do grits pelo fubá na produção de snacks sob o ponto de vista do produto final.

  1. Utilização da Areia Industrial em Argamassas de Revestimento

    Directory of Open Access Journals (Sweden)

    Luana Cechin

    2016-06-01

    Full Text Available Este trabalho tem como objetivo a caracterização da Areia Industrial identificando suas propriedades físicas e mecânicas, através de ensaios de laboratório. Esse trabalho compara essas propriedades com os resultados obtidos utilizando a areia natural, na confecção de argamassas. Para fazer estas análises foram realizados ensaios nas areias conforme as Normas Técnicas da ABNT (Associação Brasileira de Normas Técnicas, bem como nas argamassas moldadas em corpos de prova prismáticos. Foram realizados ensaios de compressão, e de tração na flexão. Para a comparação da ação dessas areias, foram usados (cinco traços diferentes na composição da argamassa, ou seja: 100% areia natural; 75% areia natural e 25% areia artificial; 50% areia natural e 50% areia artificial; 25% areia natural e 75% areia artificial; e 100% areia artificial. Como resultado observou-se que a areia industrial possui características que possibilitam o seu uso como componente de pastas de argamassas de revestimento. Observou-se ainda que para um mesmo fator água/cimento, ocorre a redução da trabalhabilidade, quando se compara com a argamasse feita com a areia natural.

  2. Productive Liquid Fertilizer from Liquid Waste Tempe Industry as Revealed by Various EM4 Concentration

    Science.gov (United States)

    Hartini, S.; Letsoin, F.; Kristijanto, A. I.

    2018-04-01

    Recently, using of productive liquid fertilizer assumed as a proper and practical fertilizer for plant productivity purposes. Various ways of enrichment of liquid fertilizer were done to achieve certain quality. The purpose of this research was to determine the proper additional formulation in the process of making productive liquid fertilizer based on the various concentration of EM4 as well as comparated the result with SNI. Liquid tempe waste were collected from some tempe industries at Sidorejo Kidul village, Tingkir district, Salatiga. The concentration of EM4 which were added to the tempe wastewater are 0%; 0.20%; 0.40%; 0.60%; 0.80%; 1.00% respectively. The pH, temperature, C total, N total, C/N ratio, and PO4 3- were measured. Data was analyzed by using Randomize Completely Block Design (RCBD) with 6 treatments and 4 replications. Comparison between the average, the Honestly Significance Deference (HSD) 5% was used. The results showed that the addition of EM4 indicated there were a significant progress. Moreover, the most effective formula to increase the quality of productive liquid fertilizer from liquid waste tempe was found in addition of 1.00% EM4 with the gained analysis value for the C total, N total, C/N ratio, and degree of PO4 3- as follows : 4.395 ± 1.034%; 1.470 ± 0.081%; 3.01 ± 0.756; 685.28 ± 70.44 ppm . Associated with the need fulfillment of SNI hence can be concluded that result of Productive Liquid Fertilizer (PLF) from liquid waste tempe successfully fulfill SNI of liquid fertilizer for pH parameter and total N, only.

  3. A Study of the Strategic Alliance for EMS Industry: The Application of a Hybrid DEA and GM (1, 1 Approach

    Directory of Open Access Journals (Sweden)

    Chia Nan Wang

    2015-01-01

    Full Text Available Choosing a partner is a critical factor for success in international strategic alliances, although criteria for partner selection vary between developed and transitional markets. This study aims to develop effective methods to assist enterprise to measure the firms’ operation efficiency, find out the candidate priority under several different inputs and outputs, and forecast the values of those variables in the future. The methodologies are constructed by the concepts of Data Envelopment Analysis (DEA and grey model (GM. Realistic data in four consecutive years (2009–2012 a total of 20 companies of the Electronic Manufacturing Service (EMS industry that went public are completely collected. This paper tries to help target company—DMU1—to find the right alliance partners. By our proposed approach, the results show the priority in the recent years. The research study is hopefully of interest to managers who are in manufacturing industry in general and EMS enterprises in particular.

  4. A Study of the Strategic Alliance for EMS Industry: The Application of a Hybrid DEA and GM (1, 1) Approach

    Science.gov (United States)

    Wang, Chia Nan; Tran, Thanh Tuyen; Huong, Bui Bich

    2015-01-01

    Choosing a partner is a critical factor for success in international strategic alliances, although criteria for partner selection vary between developed and transitional markets. This study aims to develop effective methods to assist enterprise to measure the firms' operation efficiency, find out the candidate priority under several different inputs and outputs, and forecast the values of those variables in the future. The methodologies are constructed by the concepts of Data Envelopment Analysis (DEA) and grey model (GM). Realistic data in four consecutive years (2009–2012) a total of 20 companies of the Electronic Manufacturing Service (EMS) industry that went public are completely collected. This paper tries to help target company—DMU1—to find the right alliance partners. By our proposed approach, the results show the priority in the recent years. The research study is hopefully of interest to managers who are in manufacturing industry in general and EMS enterprises in particular. PMID:25821859

  5. Considerações sobre a terceira revolução industrial e a força de trabalho em saúde em Natal Considerations on the third industrial revolution and the health work force in Natal

    Directory of Open Access Journals (Sweden)

    Soraya Maria de Medeiros

    2004-06-01

    Full Text Available A articulação entre modo de produção, políticas sociais e práticas de saúde constitui-se o fio condutor desta investigação: trabalho e trabalhadores em saúde. A Terceira Revolução Industrial desencadeou novas articulações de processos econômicos, políticos e sociais, projetos de sociedade, formas de organização de poder e de atores sociais em proporções mundiais. A conformação definida pela nova divisão mundial do trabalho mantém uma relação de força desigual entre o grupo dos países desenvolvidos e em desenvolvimento. O Brasil também vivencia esse processo de transformação e vem implantando políticas sociais com características do modelo neoliberal. Tais políticas têm causado dificuldades, injustiças e instabilidade social, constituindo desafios aos direitos sociais e desencadeando processos que envolvem os âmbitos público e o privado, em termos organizativos e de subjetividade. Este estudo trata de um recorte de periferia do capitalismo tardio, tendo o Brasil como exemplo, e mais especificamente a região Nordeste.The articulation among production mode, social politics and health practices is established as conducting wire of our inquiry press cutting: the work and the workers in health. The Third Industrial Revolution unchained new articulations with the economical, political and social processes in world-wide ratios, the society projects, forms of organization, power and the social actors. This conformation defined by the new world-wide work division keeps a relation of unequal force between developed countries group and developing countries. Brazil lives this transformation process and has been implanting social politics with the neoliberal model characteristics. Such politcs have been motivating difficulties, injustices and social instability, constituting challenges to the question of the social rights and unchaining processes that involve the public and the private of the Brazilian citizens, in their

  6. Automação industrial e sistemas informatizados de gestão da produção em fundições de mercado Industrial automation and computerized production management systems in make-to-order foundries

    Directory of Open Access Journals (Sweden)

    Flavio Cesar F. Fernandes

    2002-12-01

    Full Text Available Fundição é um processo de fabricação que vem crescendo em importância. O principal objetivo deste artigo é analisar, em termos de automação e sistemas informatizados de gestão da produção (SIGP, as fundições de mercado (fundições que produzem sob encomenda um grande número de pedidos vindos, em geral, de um grande número de clientes no interior do Estado de São Paulo pertencentes aos 5 principais pólos (Piracicaba, Indaiatuba, Limeira, São Carlos e Itu com 10 a 250 trabalhadores. Das 61 empresas do interior de São Paulo, 35 situam-se nesses 5 pólos (ou em suas imediações; entrevistamos pessoalmente os diretores industriais e visitamos o chão de fábrica de 30 fundições dentre essas 35. Analisamos quase 200 tabelas de freqüência e de contingência e extraímos várias conclusões, por exemplo: (i entre os três principais problemas e necessidades relativos à produção, dois deles estão diretamente relacionados com a automação industrial e com os SIGP; (ii são coincidentes os interesses em automação e SIGP.Foundry is a manufacturing process with a growing importance. The main objective of this paper is to analyze, in terms of automation and of computerized production management systems (CPMS, the make-to-order foundry in the interior of the state of São Paulo belonging to 5 main foundry industrial districts (Piracicaba, Indaiatuba, Limeira, São Carlos and Itu with 10 to 250 workers. From the 61 enterprises in the interior of São Paulo State, 35 are situated in these 5 industrial districts (or in their neighborhood; we interviewed personally the industrial executive officer and visited the shop-floor of 30 among this 35 foundries. We have analyzed almost 200 frequency and contingency tables and draw several conclusions, for example: (i among the three main problems and necessities related with production, two of them are directly related with automation and CPMS; (ii automation and CPMS generate coincident

  7. Effect of Surface Contaminants Remained on the Blasted Surface on Epoxy Coating Performance and Corrosion Resistance

    International Nuclear Information System (INIS)

    Baek, Kwang Ki; Park, Chung Seo; Kim, Ki Hong; Chung, Mong Kyu; Park, Jin Hwan

    2006-01-01

    One of the critical issues in the coating specification is the allowable limit of surface contaminant(s) - such as soluble salt(s), grit dust, and rust - after grit blasting. Yet, there is no universally accepted data supporting the relationship between the long-term coating performance and the amount of various surface contaminants allowed after grit blasting. In this study, it was attempted to prepare epoxy coatings applied on grit-blasted steel substrate dosed with controlled amount of surface contaminants - such as soluble salt(s), grit dust, and rust. Then, coating samples were subjected to 4,200 hours of cyclic test(NORSOK M-501), which were then evaluated in terms of resistance to rust creepage, blistering, chalking, rusting, cracking and adhesion strength. Additional investigations on the possible damage at the paint/steel interface were carried out using an Electrochemical Impedance Spectroscopy(EIS) and observations of under-film-corrosion. Test results suggested that the current industrial specifications were well matched with the allowable degree of rust, whereas the allowable amount of soluble salt and grit dust after grit blasting showed a certain deviation from the specifications currently employed for fabrication of marine vessels and offshore facilities

  8. Reestruturação urbano-Regional em São Paulo: falácias e fantasias do apocalipse industrial metropolitano

    Directory of Open Access Journals (Sweden)

    Rogério dos Santos Acca

    2003-01-01

    Full Text Available Este artigo busca discutir com a literatura recentemente produzida para dar conta dos padrões de reestruturação urbano-industrial em São Paulo. Entendendo as metrópoles como espaços de produção pós-industrial, a literatura sobre as cidades globais observa uma tendência de crescimento vertiginoso do setor de serviços na esteira da intensificação do papel do capital financeiro como elemento dinâmico basilar de uma nova economia. Assim, as cidades globais centralizariam os grandes conglomerados do setor financeiro que se tornam extremamente dependentes da infra-estrutura, da mão-de-obra altamente especializada e da disponibilidade de informações presentes nos grandes centros urbanos. Nesse sentido, o setor de serviços - dinamizado pelo setor financeiro, basicamente - tenderia a superar a indústria em termos de geração de dinamismo econômico e social nos conglomerados urbanos. Contudo, os padrões recentes da produção metropolitana paulista indicam que a indústria continua sendo o elemento central na dinâmica territorial da RMSP, evidenciando que estamos distantes de um apocalipse da indústria, possibilitado pelo deslocamento dos setores-chave da economia.

  9. A ressaca pós-industrial e o laddism em Trainspotting

    Directory of Open Access Journals (Sweden)

    Fabiane Lazzaris

    2016-04-01

    Full Text Available O artigo discute o impacto do cenário político e social das últimas décadas do século XX na produção literária escocesa, tendo como objeto de análise o romance Trainspotting (1993, de Irvine Welsh. Argumenta-se que o vácuo existencial potencializado pelo abuso de drogas não constitui o tema central da obra e que, na verdade, o livro problematiza o sentimento de letargia de uma geração desiludida com o modelo econômico da sociedade pós-industrial do fim do século XX. As drogas e a consequente inércia dos personagens de Trainspotting são representadas por Welsh como elementos de subversão em oposição ao modelo de sociedade profundamente consumista. Ademais, o desemprego massivo acaba criando novas relações sociais entre os homens e as mulheres, o que gera uma forte onda de afirmação que perpassa o machismo, o laddism.

  10. Characterization of solid wastes from kraft pulp industry for ceramic materials development purposes

    International Nuclear Information System (INIS)

    Rodrigues, L.R.; Francisco, M.A.C.O.; Sagrillo, V.P.D.; Louzada, D.M.; Entringer, J.M.S.

    2016-01-01

    The Kraft pulp industry generates a large amount of solid wastes. Due this large quantity, the target of this study is characterize inorganic solid wastes, dregs, grits and lime mud, from the step of reagents recovery of Kraft process, aiming evaluate the potentiality of their use as alternative raw material on development of ceramic materials. Initially, the wastes were dried and ground, then they were subjected to the following characterization techniques: pH analysis, particle size analysis, X ray fluorescence, X ray diffraction, differential thermal analysis and thermogravimetric analysis and scanning electron microscopy. According to the results, it may be concluded that these wastes could be used as raw material in production of red ceramic and luting materials. (author)

  11. Influence of biochars, compost and iron grit, alone and in combination, on copper solubility and phytotoxicity in a Cu-contaminated soil from a wood preservation site.

    Science.gov (United States)

    Oustriere, Nadège; Marchand, Lilian; Galland, William; Gabbon, Lunel; Lottier, Nathalie; Motelica, Mikael; Mench, Michel

    2016-10-01

    Two biochars, a green waste compost and iron grit were used, alone and in combination, as amendment to improve soil properties and in situ stabilize Cu in a contaminated soil (964mgCukg(-1)) from a wood preservation site. The pot experiment consisted in 9 soil treatments (% w/w): untreated Cu-contaminated soil (Unt); Unt soil amended respectively with compost (5%, C), iron grit (1%, Z), pine bark-derived biochar (1%, PB), poultry-manure-derived biochar (1%, AB), PB or AB+C (5%, PBC and ABC), and PB or AB+Z (1%, PBZ and ABZ). After a 3-month reaction period, the soil pore water (SPW) was sampled in potted soils and dwarf beans were grown for a 2-week period. In the SPW, all amendments decreased the Cu(2+) concentration, but total Cu concentration increased in all AB-amended soils due to high dissolved organic matter (DOM) concentration. No treatment improved root and shoot DW yields, which even decreased in the ABC and ABZ treatments. The PBZ treatment decreased total Cu concentration in the SPW while reducing the gap with common values for root and shoot yields of dwarf bean plants. A field trial is underway before any recommendation for the PB-based treatments. Copyright © 2016 Elsevier B.V. All rights reserved.

  12. Industrial emerging chemicals in the environment

    Directory of Open Access Journals (Sweden)

    Vojinović-Miloradov Mirjana B.

    2014-01-01

    Full Text Available In the recent time, considerable interest has grown concerning the presence of the emerging industrial chemicals, EmIC. They are contaminants that have possible pathway to enter to the environment and they are dominantly released by industrial and anthropogenic activities. EmIC are applied in different fields using as industrial chemicals (new and recently recognized, global organic contaminants (flame retardant chemicals, pharmaceuticals (for both human and animal uses, endocrine-modulating compounds, biological metabolites, personal care products, household chemicals, nanomaterial (energy storage products, lubricants, anticorrosive and agriculture chemicals and others that are applied to a wide variety of everyday items such as clothing, upholstery, electronics and automobile interiors. NORMAN (Network of reference laboratories for monitoring of emerging environmental pollutants has established an open, dynamic, list of emerging substances and pollutants. EmIC have been recently detected in the environment due to their long-term presence, pseudo-persistence and increased use. Improvements in sophisticated analytical methods and time integrative passive sampling have enabled the identification and quantification of EmIC, in very low concentrations (ppb, ppt and lower, which likely have been present in all environmental mediums for decades. Passive technology is an innovative technique for the time-integrated measurement of emerging contaminants in water, sediment, soil and air. Passive samplers are simple handling cost-effective tool that could be used in environmental monitoring programmes. These devices are now being considered as a part of an emerging strategy for monitoring a range of emerging industrial chemicals and priority pollutants in the aquatic environment. EmIC are substances that are not included in the routine monitoring programmes and whose fate, behaviour and (ecotoxicological effects are still not well understood. Emerging

  13. Controle químico da mancha-bacteriana do tomate para processamento industrial em campo Field chemical control of bacterial spot on tomato for industrial processing

    Directory of Open Access Journals (Sweden)

    Abadia dos R Nascimento

    2013-03-01

    Full Text Available Com o objetivo de avaliar produtos químicos no controle da mancha-bacteriana em tomate para processamento industrial, foram conduzidos dois ensaios na área experimental da Unilever Bestfoods, em Goiânia-GO. No primeiro, o híbrido Heinz 9992 foi inoculado com Xanthomonas perforans em blocos casualizados, com 15 tratamentos e três repetições. O segundo ensaio foi em blocos ao acaso com parcelas subdivididas com três repetições. A parcela principal foi "tratamento químico" (10 tratamentos e a subparcela "híbrido" (Hypeel 108 e U2006. Inoculou-se X. perforans e X. gardneri. Em ambos os ensaios os produtos testados, em diferentes números de aplicações e regimes, foram: acibenzolar-S-metil (ASM; famoxadona + mancozebe; metiram + piraclostrobina; fosfito PK; cloretos de benzalcônio; óxido cuproso e hidróxido de cobre (SC, WP e WG. Em ambos os ensaios, foram avaliados severidade da doença nas folhas, número de frutos com sintomas e produtividade. No segundo ensaio avaliou-se também o número de frutos com escaldadura. No primeiro ensaio foram detectadas diferenças significativas (p>0,05 entre os tratamentos somente nas duas primeiras avaliações de severidade, mas nenhum dos tratamentos diferiu da testemunha. No segundo ensaio, para severidade foliar, foi detectada diferença significativa apenas para os híbridos na primeira avaliação. Para número de frutos com sintomas e escaldadura a interação entre os fatores "tratamento químico" e "híbrido" foi também significativa. Nas folhas, 'U2006' foi mais resistente do que 'Hypeel 108', que apresentou maior incidência de escaldadura, mas nos frutos ocorreu o inverso. Para produtividade, os dois fatores foram significativos. 'U2006' foi mais produtivo do que 'Hypeel 108'. Entre os 10 tratamentos químicos, apesar de nenhum ter diferido da testemunha, famoxadona + mancozebe, que resultou em maior produtividade, diferiu de hidróxido de cobre (WG, ASM - famoxadona + mancozebe e

  14. Processing agricultural and industrial waste materials to fodder

    Energy Technology Data Exchange (ETDEWEB)

    Varga, J; Baintner, F; Schmidt, J

    1977-11-28

    Unstable agricultural and industrial waste materials containing proteins and less than or equal to 80% H/sub 2/O, e.g. feathers, entrails, blood, malt, malt husks, whey, skim milk, cheese wastes, starch, malt residues, marc, broken and bloody eggs, lucerne liquor, etc. were homogenized with fodder containing carbohydrates or inert materials, as well as additives, e.g., AcOH, ascorbic acid, cysteine, NaNO/sub 2/, etc. to give a products containing less than or equal to 60% H/sub 2/O, pH 4.6 to 4.8, storable for shorter periods and useful for further processing. Thus, a homogenized mixture of 60 parts lard cake and 40 parts corn grits was homogenized with a 2:1 mixture of EtCO/sub 2/H and HCO/sub 2/H 1.5, NaNO/sub 2/ 0.05, and vitamin C 0.2% by weight to give a product with 32% protein content, useful for further processing.

  15. Reúso de água em indústria de reciclagem de plástico tipo PEAD Water reuse on HDPE plastics recycling pack industry

    Directory of Open Access Journals (Sweden)

    Angela Cristina Orsi Bordonalli

    2009-06-01

    Full Text Available A discussão acerca da viabilidade técnica, econômica e ambiental do reúso da água em processos industriais tem sido uma preocupação constante. Neste trabalho propõe-se uma alternativa simplificada para o tratamento de efluentes com vistas ao seu reúso em uma indústria de reciclagem de plásticos. A água, no presente caso, é componente fundamental para o processo, já que participa como elemento de remoção de detritos e impurezas que contaminam a matriz da matéria-prima utilizada, proveniente, principalmente, de aterros sanitários e lixões. As embalagens plásticas recicladas pela indústria em questão são, em sua grande maioria, de uso doméstico e, em menor escala, frascos contaminados com óleos lubrificantes. Os resultados demonstraram a viabilidade do tratamento através de processo físico-químico por coagulação, floculação, decantação e filtração em manta geotêxtil, com o uso do hidroxicloreto de alumínio (PAC como coagulante, soda cáustica (50% como alcalinizante e polieletrólito como auxiliar de floculação e desidratação do lodo, bem como a exequibilidade do reúso dos efluentes em circuito fechado.The discussion about technical, economical and environmental feasibility of water reuse in industrial process has been a constant concern. This paper purposes a simplified choice for waste water treatment seeking reuse in a plastic recycle industry. The water, in this case, is a prime component because it is the main element for the debris and impurities removal that contaminates the matrix of plastic raw material, which comes, mostly, from landfill and waste disposals. The recycled plastic packages, from the company that had been used for this research, come mostly from domestic use and, in a minor scale, the plastic package contaminated by lubricant oil. The final results show feasible for the treatment through physical-chemical process by coagulation, flocculation, decantation and filtration on geotextile

  16. Fate of Fusarium mycotoxins in maize flour and grits during extrusion cooking.

    Science.gov (United States)

    Scudamore, Keith A; Guy, Robin C E; Kelleher, Brian; MacDonald, Susan J

    2008-11-01

    Extrusion technology is used widely in the manufacture of a range of breakfast cereals and snacks for human consumption and animal feeds. To minimise consumer exposure to mycotoxins, the levels of deoxynivalenol (DON) and zearalenone (ZON) in cereals/cereal products and fumonisins B(1) and B(2) (FB(1) and FB(2)) in maize are controlled by European Union legislation. Relatively few studies, however, have examined the loss of Fusarium mycotoxins during processing. The behaviour of FB(1), FB(2) and fumonisin B(3) (FB(3)), DON and ZON during extrusion of naturally contaminated maize flour and maize grits is examined using pilot-scale equipment. DON and ZON are relatively stable during extrusion cooking but the fumonisins are lost to varying degrees. There is some loss of ZON when present in low concentrations and extruded at higher moisture contents. The presence of additives, such as reducing sugars and sodium chloride, can also affect mycotoxin levels. Moisture content of the cereal feed during extrusion is important and has a greater effect than temperature, particularly on the loss of fumonisins at the lower moistures. The effects are complex and not easy to explain, although more energy input to the extruder is required for drier materials. However, on the basis of these studies, the relationship between the concentration of Fusarium toxins in the raw and finished product is toxin- and process-dependent.

  17. Estágios evolutivos da contabilidade gerencial que preponderam em um polo industrial moveleiro = Evolutionary stages of IFAC managerial accounting that prevail in a furniture industrial pole

    Directory of Open Access Journals (Sweden)

    Edson Roberto Macohon

    2016-07-01

    Full Text Available O International Federations of Accountants (IFAC identificou quatro estágios evolutivos da contabilidade gerencial. Este estudo objetiva investigar os estágios evolutivos da contabilidade gerencial que preponderam em um polo industrial moveleiro. Para tal realizou-se pesquisa descritiva a partir de uma survey, tendo como população as 73 indústrias associadas ao Sindicato das Indústrias da Construção e do Mobiliário de São Bento do Sul, SC, Brasil, e uma amostra não-probabilística de 15 indústrias. Os resultados da pesquisa mostram que os artefatos da contabilidade gerencial com mais de 60% de indicações como projeto implantado são: simulações de rentabilidade dos produtos; custo dos produtos pelo custeio por absorção; acompanhamento da evolução dos indicadores não financeiros; índices econômico-financeiros como Return of Investment (ROI; Retorno sobre o Patrimônio Líquido (RSPL e índices de liquidez; redução do custo na fase de projeto de novo produto; planilhas de custos logísticos. Os artefatos que tiveram percentuais acima de 60% de indicações como projetos não implantados são: Custeio Baseado em Atividades (ABC; geração de relatórios por Business Inteligence (BI; Balanced Scorecard (BSC; Economic Value Added (EVA; preço de transferência e Just-in-time (JIT. The International Federations of Accountants (IFAC has identified four stages of progressive managerial accounting. This study aims at investigating the evolutionary stages of managerial accounting that prevail in a furniture industrial pole. For this, a descriptive research was carried out from a survey, having as population 73 industries associated with the Union of Industries and Construction of Furniture of São Bento do Sul, SC, Brazil, and a non-probability sample of 15 industries. The survey results have shown that the artifacts of managerial accounting that got more than 60% of indications, such as project implemented are: simulations of

  18. Percepção de saúde e fatores associados em industriários de Santa Catarina, Brasil Self-perceived health and associated factors in industrial workers from Santa Catarina State, Brazil

    Directory of Open Access Journals (Sweden)

    Silvio Aparecido Fonseca

    2008-03-01

    Full Text Available O objetivo foi identificar a prevalência e os fatores associados à percepção negativa de saúde em trabalhadores da indústria no Estado de Santa Catarina, Brasil. Para tanto, foi realizado estudo transversal em amostra representativa de 2.574 sujeitos (62,5% - homens. A percepção negativa de saúde foi o desfecho investigado em relação a variáveis demográficas, sócio-econômicas, perceptivas (estresse e sono e de saúde. Análise de regressão logística multivariável não condicional baseada em modelo hierárquico foi utilizada para explorar associações. A percepção negativa de saúde foi baixa (11,8% e positivamente associada com a faixa etária, atividade física de lazer, percepção da qualidade do sono, percepção do estresse e sexo. Em contrapartida, a renda familiar bruta e o nível de escolaridade associaram-se inversamente ao desfecho. Industriários que exerciam trabalhos de maior demanda física e aqueles classificados nos extremos das categorias do índice de massa corporal (30kg/m² apresentaram maiores prevalências de percepção negativa de saúde. Diferenças significativas de acordo com o estado civil, consumo de bebidas alcoólicas (binge drinking e tabagismo não foram verificadas. Poucas associações foram reveladas para o sexo feminino.The purpose of this study was to determine the prevalence of negative self-perceived health and associated factors among industrial workers in Santa Catarina State, in southern Brazil. A cross-sectional investigation was conducted with a representative sample of 2,574 subjects (62.5% men. Negative self-perceived health (fair or poor was the outcome investigated in association with demographic, socioeconomic, and other health indicators. Multivariate analysis was performed through logistic regression based on a hierarchical model. Negative self-perceived health was exceptional (11.8%, but positively associated with age, leisure physical activity, perceived quality of

  19. Mineral phases of green liquor dregs, slaker grits, lime mud and wood ash of a Kraft pulp and paper mill

    Energy Technology Data Exchange (ETDEWEB)

    Martins, Fernanda Machado [Laboratorio de Quimica Mineral Aplicada, Departamento de Quimica-UFPR, Universidade Federal do Parana (UFPR), CP 19081, CEP 81531990, Curitiba-PR (Brazil); Munhoz Martins, Joaniel [Laboratorio de Analise de Minerais e Rochas (LAMIR-UFPR) (Brazil); Ferracin, Luiz Carlos [Laboratorio Quimico da Votorantin Cimentos (Brazil); Cunha, Carlos Jorge da [Laboratorio de Quimica Mineral Aplicada, Departamento de Quimica-UFPR, Universidade Federal do Parana (UFPR), CP 19081, CEP 81531990, Curitiba-PR (Brazil)]. E-mail: cjdcunha@quimica.ufpr.br

    2007-08-17

    Four residues generated in a Kraft, pulp and paper plant, were characterized by X-ray fluorescence spectroscopy (XFA), powder X-ray diffraction (XRD), thermogravimmetric analysis (TG) and Fourier transform infrared spectroscopy (FTIR). A quantitative phase composition model, that accounts for the observed data and for the physico-chemical conditions of formation, was postulated for each material. Emphasis was given on the identification of the mineral components of each material. The green liquor dregs and the lime mud contain Calcite and Gipsite. The slaker grits contains Calcite, Portlandite, Pirssonite, Larnite and Brucite. The Calcite phase, present in the dregs and in the lime mud, has small amounts of magnesium replacing calcium. The wood ash contains Quartz as the major crystalline mineral phase.

  20. Mineral phases of green liquor dregs, slaker grits, lime mud and wood ash of a Kraft pulp and paper mill

    International Nuclear Information System (INIS)

    Martins, Fernanda Machado; Munhoz Martins, Joaniel; Ferracin, Luiz Carlos; Cunha, Carlos Jorge da

    2007-01-01

    Four residues generated in a Kraft, pulp and paper plant, were characterized by X-ray fluorescence spectroscopy (XFA), powder X-ray diffraction (XRD), thermogravimmetric analysis (TG) and Fourier transform infrared spectroscopy (FTIR). A quantitative phase composition model, that accounts for the observed data and for the physico-chemical conditions of formation, was postulated for each material. Emphasis was given on the identification of the mineral components of each material. The green liquor dregs and the lime mud contain Calcite and Gipsite. The slaker grits contains Calcite, Portlandite, Pirssonite, Larnite and Brucite. The Calcite phase, present in the dregs and in the lime mud, has small amounts of magnesium replacing calcium. The wood ash contains Quartz as the major crystalline mineral phase

  1. North Kalimantan is Free From EMS (Early Mortality Syndrome) in the Shrimps

    OpenAIRE

    Lestiawan, Sab; Jati, Nugroho Sasongko; Wiro, Hermas

    2014-01-01

    The acute hepatopancreatic necrosis syndrome (AHPNS) or also known worldwide as early mortility syndrome (EMS) is very dangerous for the shrimps industry since it really strikes the shrimps by larvae size. The EMS attacks shrimps at 20 to 30 days of age and at 40 days of age as well. All the shrimps that are being infected will be dead righ away. The EMS has caused the significant economic losses in the shrimps industry due to the mass mortality of the shrimps in Vietnam (in the years of 2010...

  2. Goal-Directed Resilience in Training (GRIT: A Biopsychosocial Model of Self-Regulation, Executive Functions, and Personal Growth (Eudaimonia in Evocative Contexts of PTSD, Obesity, and Chronic Pain

    Directory of Open Access Journals (Sweden)

    Martha Kent

    2015-06-01

    Full Text Available This paper presents a biopsychosocial model of self-regulation, executive functions, and personal growth that we have applied to Goal-Directed Resilience in Training (GRIT interventions for posttraumatic stress disorder (PTSD, obesity, and chronic pain. Implications of the training for the prevention of maladaptation, including psychological distress and health declines, and for promoting healthy development are addressed. Existing models of attention, cognition, and physiology were sourced in combination with qualitative study findings in developing this resilience skills intervention. We used qualitative methods to uncover life skills that are most salient in cases of extreme adversity, finding that goal-directed actions that reflected an individual’s values and common humanity with others created a context-independent domain that could compensate for the effects of adversity. The efficacy of the resilience skills intervention for promoting positive emotion, enhancing neurocognitive capacities, and reducing symptoms was investigated in a randomized controlled trial with a veteran population diagnosed with PTSD. The intervention had low attrition (8% and demonstrated improvement on symptom and wellbeing outcomes, indicating that the intervention may be efficacious for PTSD and that it taps into those mechanisms which the intervention was designed to address. Feasibility studies for groups with comorbid diagnoses, such as chronic pain and PTSD, also showed positive results, leading to the application of the GRIT intervention to other evocative contexts such as obesity and chronic pain.

  3. The Furniture Industry In Londrina A Indústria de Móveis em Londrina

    Directory of Open Access Journals (Sweden)

    Marcia Regina Gabardo da Câmara

    2004-11-01

    Full Text Available The Brazilian furniture industry is organized in clusters. Cluster is an agglomerate of located companies in a certain area that you/they develop their activities in an articulate way and with a logic in common and whose dynamics depends on the fact that those companies accomplish similar activities, use specific labor and raw materials, etc. inducing interaction and synergy, due to articulated performance, they provide to the group of companies competitive advantages that are reflected in an differentiated performance. The companies agglomerated geographically, mainly SMEs - small and medium enterprises - present success - greater competitiveness, generation of jobs, technological innovations, etc. In the area of Londrina - PR, there is a geographical agglomerate of companies producing of pieces of furniture, with prominence for the residential pieces of furniture and of office. The study tried to identify if the geographical gathering of furniture companies in the area corresponds or not to a cluster. A great potential was verified for the development of the same, due to the proximity with customers and suppliers and in relation to the available infrastructure of services. However, any form of cooperative action was not verified among companies or enter companies to develop complementary activities, it was not also verified any institution or support association for the companies. It is concluded that in the area of Londrina, the cluster is incipient because in spite of the gathering of companies, due to the low vertical links and absence of horizontal and multilateral links that characterize more advanced clusters, the synergetic effects of the gathering are not verified.A indústria moveleira brasileira está organizada em clusters. Cluster é um aglomerado de empresas localizadas em uma determinada região que desenvolvem suas atividades de forma articulada e com uma lógica em comum e cuja dinâmica pode ser determinada pelo fato dessas

  4. Remoção de sulfato de águas residuárias industriais em reator anaeróbio de leito fixo operado em bateladas sequenciais Sulfate removal from industrial wastewaters in fixed film anaerobic sequential batch reactor

    Directory of Open Access Journals (Sweden)

    Arnaldo Sarti

    2008-03-01

    Full Text Available Avaliou-se o potencial de uso reator anaeróbio operado em bateladas seqüenciais com biomassa imobilizada (ASBBR, em escala piloto, no tratamento de água residuária industrial contendo elevadas concentrações de sulfato. O ASBBR, com volume total de 1.2 m³, foi preenchido com carvão mineral como meio suporte para imobilização da biomassa (leito fixo. Foram aplicadas cargas de 0,15; 0,30; 0,65; 1,30 e 1,90 kg SO4-2/ciclo (ou batelada com duração de 48 h, correspondendo, respectivamente, às concentrações de sulfato no afluente de 0,25; 0,50; 1,0; 2,0 e 3,0 gSO4-2.l-1. Utilizou-se etanol como doador de elétrons para a redução do sulfato. O reator foi operado à temperatura ambiente (29±8ºC, tendo sido obtidas eficiências médias na redução de sulfato entre 88 e 92% em 92 ciclos (275 dias. Os resultados obtidos permitem concluir que o uso de reatores ASBBR constitui-se em alternativa eficiente para a remoção de sulfatos de águas residuárias com características semelhantes às utilizadas neste trabalho.The potential use of an anaerobic sequencing batch biofilm reactor (ASBBR in pilot-scale for the treatment of a sulfate-rich industrial wastewater was evaluated. The pilot 1.2 m³ ASBBR reactor was filled with mineral coal for biomass immobilization (fixed film. The sulfate loading rates applied were 0.15; 0.30; 0.65; 1.30 and 1.90 kg SO4-2/cycle (or batch. Each cycle lasted 48 h. The influent concentrations were, respectively, 0.25; 0.50; 1.0; 2.0 and 3.0 gSO4-2.l-1. Ethanol was used as electron donor for sulfate reduction. The reactor operated at ambient temperature (29±8ºC, and the mean efficiencies of sulfate removal were in the range 88 to 92% in the 92 run cycles. The total operating period comprised 275 days. Based on the results obtained in this research, it could be concluded that the ASBBR can be an efficient alternative for the removal of sulfate from other industrial wastewaters with similar characteristics.

  5. Archivage électronique : spécifications relatives à la conception et à l'exploitation de systèmes informatiques en vue d'assurer la conservation et l'intégrité des documents stockés dans ces systèmes

    CERN Document Server

    Association Française de Normalisation. Paris

    2007-01-01

    Archivage électronique : spécifications relatives à la conception et à l'exploitation de systèmes informatiques en vue d'assurer la conservation et l'intégrité des documents stockés dans ces systèmes

  6. Substituição de areia de quartzo por finos de gnaisse em massa cerâmica para telhas: teste industrial Replacing quartz sand for gnaisse fines waste into roofing tile body: industrial test

    Directory of Open Access Journals (Sweden)

    C. M. F. Vieira

    2008-12-01

    Full Text Available Foi avaliado o efeito da substituição de areia por um resíduo de beneficiamento de rocha ornamental, finos de gnaisse, em uma massa de cerâmica vermelha utilizada para fabricação de telhas. Foram preparadas telhas prensadas, do tipo "portuguesa", para queima a 900 ºC em forno industrial. As seguintes propriedades foram determinadas: retração linear, absorção de água e carga de ruptura na flexão. Além disso, avaliaram-se as características das matérias-primas e a plasticidade das composições por meio dos limites de Atterberg. Os resultados indicaram que a utilização de finos de gnaisse em substituição à areia possibilitou uma melhoria na trabalhabilidade/plasticidade da massa cerâmica e acarretou uma pequena redução na absorção de água das telhas. A resistência mecânica não se alterou, dentro da precisão estatística das medidas.The effect of replacing sand for gnaisse sawing waste into a red ceramic body used for roofing tile fabrication was evaluated. Pressed roofing tiles, "portuguese" style, were prepared before firing at 900 ºC in an industrial furnace. The following properties were evaluated: linear shrinkage, water absorption and load rupture strength. The plasticity of the elaborated compositions was determined by the Atterberg limits. The results show that the use of gnaisse fines replacing the sand, improved the workability of the ceramic body and promoted a slight decrease on the water absorption of the roofing tiles. The mechanical strength was not changed within the statistical error.

  7. ISO 14001 ENVIRONMENTL MANAGEMENT SYSTEMS IN GOVERNMENT AND INDUSTRY

    Science.gov (United States)

    Two new USEPA documents address environmental management systems (EMS) from the perspectives of government and industry and are offered as tools for understanding the process of the ISO 14000 Standards development and usefulness of an EMS approach. The first document, ISO 14001 -...

  8. Evaluation of <em>HER2em> Gene Amplification in Breast Cancer Using Nuclei Microarray <em>in em>S>itu em>Hybridization

    Directory of Open Access Journals (Sweden)

    Xuefeng Zhang

    2012-05-01

    Full Text Available Fluorescence<em> em>>in situ em>hybridization (FISH assay is considered the “gold standard” in evaluating <em>HER2/neu (HER2em> gene status. However, FISH detection is costly and time consuming. Thus, we established nuclei microarray with extracted intact nuclei from paraffin embedded breast cancer tissues for FISH detection. The nuclei microarray FISH (NMFISH technology serves as a useful platform for analyzing <em>HER2em> gene/chromosome 17 centromere ratio. We examined <em>HER2em> gene status in 152 cases of invasive ductal carcinomas of the breast that were resected surgically with FISH and NMFISH. <em>HER2em> gene amplification status was classified according to the guidelines of the American Society of Clinical Oncology and College of American Pathologists (ASCO/CAP. Comparison of the cut-off values for <em>HER2em>/chromosome 17 centromere copy number ratio obtained by NMFISH and FISH showed that there was almost perfect agreement between the two methods (κ coefficient 0.920. The results of the two methods were almost consistent for the evaluation of <em>HER2em> gene counts. The present study proved that NMFISH is comparable with FISH for evaluating <em>HER2em> gene status. The use of nuclei microarray technology is highly efficient, time and reagent conserving and inexpensive.

  9. Neonatal Phosphate Nutrition Alters <em>in em>Vivo> and <em>in em>Vitro> Satellite Cell Activity in Pigs

    Directory of Open Access Journals (Sweden)

    Chad H. Stahl

    2012-05-01

    Full Text Available Satellite cell activity is necessary for postnatal skeletal muscle growth. Severe phosphate (PO4 deficiency can alter satellite cell activity, however the role of neonatal PO4 nutrition on satellite cell biology remains obscure. Twenty-one piglets (1 day of age, 1.8 ± 0.2 kg BW were pair-fed liquid diets that were either PO4 adequate (0.9% total P, supra-adequate (1.2% total P in PO4 requirement or deficient (0.7% total P in PO4 content for 12 days. Body weight was recorded daily and blood samples collected every 6 days. At day 12, pigs were orally dosed with BrdU and 12 h later, satellite cells were isolated. Satellite cells were also cultured <em>in vitroem> for 7 days to determine if PO4 nutrition alters their ability to proceed through their myogenic lineage. Dietary PO4 deficiency resulted in reduced (<em>P> < 0.05 sera PO4 and parathyroid hormone (PTH concentrations, while supra-adequate dietary PO4 improved (<em>P> < 0.05 feed conversion efficiency as compared to the PO4 adequate group. <em>In vivoem> satellite cell proliferation was reduced (<em>P> < 0.05 among the PO4 deficient pigs, and these cells had altered <em>in vitroem> expression of markers of myogenic progression. Further work to better understand early nutritional programming of satellite cells and the potential benefits of emphasizing early PO4 nutrition for future lean growth potential is warranted.

  10. Análisis de programas de mejora continua. Un estudio longitudinal en una empresa industrial Estudo longitudinal dos resultados da melhora continua em uma empresa industrial

    Directory of Open Access Journals (Sweden)

    Juan A. Marin-Garcia

    2008-12-01

    Full Text Available Las empresas han utilizado diversas herramientas que permiten que los operarios contribuyan al proceso de mejora continua. Entre las herramientas más usadas podemos destacar los sistemas de sugerencias tanto individuales como en grupo. En esta comunicación haremos un repaso de las principales características de ambos sistemas y los modos habituales de implantación. Nuestra ponencia pretende intentar responder a estas preguntas de investigación. ¿Qué resultados se derivan de la implantación de sistemas de sugerencias individuales o en grupo? ¿Cuál de los dos sistemas es más beneficioso para la empresa? ¿Qué problemas surgen durante el funcionamiento de estos programas? Para ello, analizaremos los datos de un caso de empresa industrial donde hemos recogido los datos históricos de 5 años de aplicación de un programa de mejora continua. Ambos programas han demostrado ser provechosos para la empresa, aunque las posibilidades de los sistemas de grupo parecen ser significativamente mayores.As empresas tem utilizado diversas ferramentas que permitem que os operarios comtribuam ao processo de melhora continua. Entre as ferramentas mas usadas podemos destacar os sistemas de sugestoes tanto individual como em grupo. Nesta comunicação faremos um repaso das principais caracteristicas de ambos sistemas e os modos habituais de implantação. Nossa comunicação pretende responder a estas perguntas de pesquisa. Que resultados derivam da implantaçao de sistemas de sugestoes individuais ou em grupo? Qual dos dois sistemas beneficia mais a empresa? Que problemas surgem durante o funcionamento destes programas? Para isso analisaremos os dados de um caso de empresa industrial, onde tiramos os dados historicos de 5 anos de aplicação de um programa melhora continua. Ambos programas demonstraram ser aproveitados para a empresa, ainda que as possibilidades dos sistemas de grupo se mostram significativamente maiores.

  11. Effects of grit roughness and pitch oscillations on the S809 airfoil

    Energy Technology Data Exchange (ETDEWEB)

    Ramsay, R.F.; Hoffman, M.J.; Gregorek, G.M. [Ohio State Univ., Columbus, OH (United States)

    1995-12-01

    An S809 airfoil model was tested in The Ohio State University Aeronautical and Astronautical Research Laboratory (OSU/AARL) 3{times}5 subsonic wind tunnel (3{times}5) under steady flow and stationary model conditions, and also with the model undergoing pitch oscillations. To study the possible extent of performance loss due to surface roughness, a standard grit pattern (LEGR) was developed to simulate leading edge contamination. After baseline cases were completed, the LEGR was applied for both steady state and model pitch oscillation cases. The Reynolds numbers for steady state conditions were 0.75, 1, 1.25, and 1.5 million, while the angle of attack ranged from {minus}20, to +40 {degrees}. With the model undergoing pitch oscillations, data were acquired at Reynolds numbers of 0.75, 1, 1.25, and 1.4 million, at frequencies of 0.6, 1.2, and 1.8 Hz. Two sine wave forcing functions were used; {plus_minus} 5.5{degrees} and {plus_minus} 10{degrees}, at mean angles of attack of 8{degrees}, 14{degrees}, and 20{degrees}. For purposes herein, any reference to unsteady conditions means the model was in pitch oscillation about the quarter chord. In general, the unsteady maximum lift coefficient was from 4% to 86% higher than the steady state maximum lift coefficient, and variation in the quarter chord pitching moment coefficient magnitude was from {minus}83% to 195% relative to steady state values at high angles of attack. These findings indicate the importance of considering the unsteady flow behavior occurring in wind turbine operation to obtain accurate load estimates.

  12. Vertical Integration: Corporate Strategy in the Information Industry.

    Science.gov (United States)

    Davenport, Lizzie; Cronin, Blaise

    1986-01-01

    Profiles the corporate strategies of three sectors of the information industry and the trend toward consolidation in electronic publishing. Three companies' acquisitions are examined in detail using qualitative data from information industry columns and interpreting it on the basis of game theory. (EM)

  13. Environmental Management Systems (EMS ISO 14001 Implementation in Construction Industry: A Malaysian Case Study

    Directory of Open Access Journals (Sweden)

    Sumiani Yusoff

    2015-03-01

    Full Text Available This study seeks to explore the crucial part in EMS implementation; i.e. environmental aspects and impacts, Good Environmental Practice to be developed in construction site, as well as the level of awareness or understanding amongst site staffs on ISO 14001 EMS implementation in their organizations. Data were collected via interviews, surveys and site visits. A number of environmental aspects and impacts, and Good Environmental Practices based on ISO 14001:2004 have been identified. The level of understanding of the site staffs on ISO 14001 EMS requirements has been found to be good except for matters concerning Schedule Waste Management. In conclusion, the successful implementation of ISO 14001 EMS mainly depends on staffs‘ understanding.

  14. Estudo do resfriamento de carcaças de frango em chiller de imersão em água

    OpenAIRE

    Carciofi, Bruno Augusto Mattar

    2005-01-01

    Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro Tecnológico. Programa de Pós-Graduação em Engenharia de Alimentos O resfriamento industrial de carcaças de frango é normalmente efetuado em tanques de imersão em água (chillers). Nesta etapa, além da redução da temperatura, ocorre absorção de água pelas carcaças. Neste trabalho foram estudados diversos aspectos relacionados com a redução da temperatura e com a absorção de água por carcaças resfriadas por imersão, além ...

  15. Implementação de um programa de responsabilidade social empresarial: um estudo de caso em uma pequena empresa industrial/ Implementation of a program of corporate social responsibility: a case study in a small industrial company

    Directory of Open Access Journals (Sweden)

    Tássia Bastos Sobreira

    2015-02-01

    Full Text Available Este trabalho teve como o objetivo verificar se os indicadores do Instituto Ethos contribuem para analisar práticas sociais e desenvolver programas de responsabilidade social empresarial em empresas de pequeno porte. A estratégia de pesquisa escolhida foi o método de estudo de caso único em uma empresa do setor de tratamento térmico. Na coleta de dados utilizou-se um questionário de acordo com os parâmetros dos Indicadores do Instituto Ethos. Os resultados do programa mostrou que a utilização desses indicadores na avaliação das ações sociais serviu de parâmetro para uma empresa industrial de pequeno porte implementar um programa de responsabilidade social corporativa. Palavras-chave: Responsabilidade social empresarial; Indicadores socioambientais; Gestão socioambiental.

  16. Toxicidade de flúor em cultivares de milho em área próxima a uma indústria cerâmica, Araras (SP Fluorine toxicity in corn plants nearby a ceramic industry, Araras, State of São Paulo, Brazil

    Directory of Open Access Journals (Sweden)

    Caio Fortes

    2003-01-01

    Full Text Available Indústrias que submetem material terroso a altas temperaturas como a de cerâmicas, emitem fluoretos para a atmosfera na forma de gás, particulado ou ácido fluorídrico. Em experimentos de milho (Zea mays L., do Centro de Ciências Agrárias da Universidade Federal de São Carlos, Araras (SP, as plantas apresentaram sintomas que evoluíam de uma descoloração do limbo foliar até o secamento marginal das folhas. O objetivo deste trabalho foi avaliar os teores foliares de flúor (F na cultura do milho com sintomas de toxicidade causados por fluoretos atmosféricos emitidos por uma indústria cerâmica vizinha, e possíveis diferenças entre as cultivares de milho quanto à severidade desses sintomas. Em um experimento atribuíram-se notas relativas ao grau de injúria das folhas de 22 cultivares e, em outro, foi feita determinação de F em três cultivares de milho semeadas a 350 e 1.000 metros de distância daquela indústria. Os teores foliares de F nas folhas de milho estavam altos nas duas distâncias. Para o milho "safrinha" os teores chegaram até quatro vezes acima do teor crítico, variando entre 126 e 160 mg.kg-1. Constataram-se diferenças entre as cultivares de milho quanto à severidade de sintomas, mas não foi possível estabelecer correlação com danos na produtividade.The emission of fluoride gases, particles or fluoridric acid is commonly observed in industries that submit terrigenous materials to high temperatures, such as in the ceramic industry. Unusual abnormalities in leaves of adult plants that have been suspected to be fluorine toxicity have been observed in corn experiments carried out in the Center of Agricultural Sciences of the Federal University of São Carlos, Araras, SP, Brazil. The symptoms in the corn leaves started as discolouring of internerval cells of completed developed leaves followed by marginal burning of its tips. The objectives of this work was to evaluate the amount of fluorine (F in corn leaves

  17. Debates sobre o tecnobrega e indústria cultural em tempos de pós-fordismo * Debates on tecnobrega: culture industry in times of post-fordism

    Directory of Open Access Journals (Sweden)

    RAQUEL SANT'ANA

    2013-12-01

    Full Text Available Resumo: As últimas décadas do século XX foram marcadas por uma profunda reestruturação produtiva que afetou também a chamada “indústria cultural”. No campo da música, a alegação de que haveria uma crise causada pela circulação de cópias ilegais marcou a reorganização do setor. Neste artigo, analiso o debate em torno do tecnobrega, circuito de música popular que foi transformado em modelo para a indústria fonográfica nacional. Essa construção discursiva contou com participação de imprensa, programas televisivos e análises acadêmicas, que construíram, aos poucos, uma imagem de que o gênero seria a superação da dicotomia centro versus periferia. Esse caso permite pensar algumas das novas configurações da indústria cultural no mundo pós-fordista.Palavras-chave: Tecnobrega – Indústria Fonográfica – Circuitos Musicais. Abstract: The last decades of the Twentieth Century were marked by a profound restructuring process that has also affected the so-called "culture industry". In the music field , the claim that there would be a crisis caused by the circulation of illegal copies marked the sector reorganization. This article analyses the debate on the tecnobrega circuit of popular music which has been transformed into a model for the Brazilian music industry. This discursive construction had debates in the press, television shows and academic analysis, which gradually built an image that such genre would be the breakthrough of the center versus periphery dichotomy. This case allows us to consider some of the new settings of the culture industry in the post-Fordist world.Keywords: Tecnobrega – Phonographic Industry – Music Circuits.

  18. Role of development banks in promoting industrial energy efficiency: India case studies

    International Nuclear Information System (INIS)

    Sathaye, J.; Gadgil, A.; Mukhopadhyay, M.

    1999-01-01

    The Industrial Development Bank of India (IDBI) is the premier institution in India purveying financial assistance to the industrial-sector projects. Its annual lending amounts to $6 billion. Recognizing the need to increase lending for energy efficiency and environmental management (ee/em) projects, the Asian Development Bank (ADB) provided a $150 million line of credit to IDBI. These funds were lent to cement, steel, paper, sugar and other industries. Accompanying the line of credit, ADB also provided funds for technical assistance to strengthen IDBI's capability for the assessment of projects related to energy efficiency and environmental management (ee/em). The technical assistance (TA) focused on IDBI's institutional capability, the procedures it follows for lending in this area, studies of ten energy-intensive sectors, and training and data needs to improve its lending. The findings of the TA reveal a need to (1) use ee/em indicators during IDBI's appraisal, approval, and monitoring of projects, (2) increase the ee/em information resource base - in-house and out-house ee/em experts, handbooks, computerized data bases - that IDBI staff can access, and (3) increase awareness of ee/em components among industrial borrowers. The sector studies show that there is at least a 20% lag compared to best practice for energy use, and that a significant potential, $1.0 billion, exists for investment in ee/em activities. These activities include (a) housekeeping measures such as improved lighting, variable-speed motors/drives, improving power factor, etc., (b) installing co-generation and captive power generation units, and (c) changing manufacturing processes to more efficient and less polluting ones. Training and data needs were also identified which would improve IDBI's lending for energy efficiency and environmental management

  19. Reference Gene Selection in the Desert Plant <em>Eremosparton songoricuem>m>

    Directory of Open Access Journals (Sweden)

    Dao-Yuan Zhang

    2012-06-01

    Full Text Available <em>Eremosparton songoricum em>(Litv. Vass. (<em>E. songoricumem> is a rare and extremely drought-tolerant desert plant that holds promise as a model organism for the identification of genes associated with water deficit stress. Here, we cloned and evaluated the expression of eight candidate reference genes using quantitative real-time reverse transcriptase polymerase chain reactions. The expression of these candidate reference genes was analyzed in a diverse set of 20 samples including various <em>E. songoricumem> plant tissues exposed to multiple environmental stresses. GeNorm analysis indicated that expression stability varied between the reference genes in the different experimental conditions, but the two most stable reference genes were sufficient for normalization in most conditions.<em> EsEFem> and <em>Esα-TUB> were sufficient for various stress conditions, <em>EsEF> and <em>EsACT> were suitable for samples of differing germination stages, and <em>EsGAPDH>and <em>Es>UBQ em>were most stable across multiple adult tissue samples. The <em>Es18Sem> gene was unsuitable as a reference gene in our analysis. In addition, the expression level of the drought-stress related transcription factor <em>EsDREB2em>> em>verified the utility of<em> E. songoricumem> reference genes and indicated that no single gene was adequate for normalization on its own. This is the first systematic report on the selection of reference genes in <em>E. songoricumem>, and these data will facilitate future work on gene expression in this species.

  20. Green Biosynthesis of Silver Nanoparticles Using <em>Callicarpa maingayiem> Stem Bark Extraction

    Directory of Open Access Journals (Sweden)

    Mohammed Zidan

    2012-07-01

    Full Text Available Different biological methods are gaining recognition for the production of silver nanoparticles (Ag-NPs due to their multiple applications. The use of plants in the green synthesis of nanoparticles emerges as a cost effective and eco-friendly approach. In this study the green biosynthesis of silver nanoparticles using <em>Callicarpa maingayi em>stem bark extract has been reported. Characterizations of nanoparticles were done using different methods, which include; ultraviolet-visible spectroscopy (UV-Vis, powder X-ray diffraction (XRD, transmission electron microscopy (TEM, scanning electron microscopy (SEM, energy dispersive X-ray fluorescence (EDXF spectrometry, zeta potential measurements and Fourier transform infrared (FT-IR spectroscopy. UV-visible spectrum of the aqueous medium containing silver nanoparticles showed absorption peak at around 456 nm. The TEM study showed that mean diameter and standard deviation for the formation of silver nanoparticles were 12.40 ± 3.27 nm. The XRD study showed that the particles are crystalline in nature, with a face centered cubic (fcc structure. The most needed outcome of this work will be the development of value added products from <em>Callicarpa maingayi em>for biomedical and nanotechnology based industries.

  1. Ambiente e competitividade industrial em Portugal

    OpenAIRE

    Caetano, Gonçalo

    2000-01-01

    O principal desafio que se coloca ao desenvolvimento industrial português, num enquadramento competitivo marcado, sobretudo, pela globalização e aprofundamento e alargamento da integração europeia, é, sem dúvida, o da promoção sustentada da competitividade, entendida como variável global, relativa e pluridimensional, resultante de processos económicos, tecnológicos, sociais, institucionais e políticos complexos, e caracterizadora da performance das empresas industriais.

  2. A pedagogia industrial da FIEMG: um estudo sobre o pensamento empresarial a partir da Revista Vida Industrial (1961-1974

    Directory of Open Access Journals (Sweden)

    Jane Maria dos Santos Reis

    2014-03-01

    Full Text Available A presente pesquisa resulta dos estudos e debates, inerentes ao processo de doutoramento em Educação pelo Programa de Pós Graduação em Educação da Universidade Federal de Uberlândia, pertencente à Linha de Pesquisa “Políticas e Saberes em Educação”. Esta tese objetiva problematizar o sentido contraditório da educação enquanto formação humana histórica, especificamente sob a lógica educacional representativa do empresariado industrial associado à FIEMG (Federação das Indústrias do Estado de Minas Gerais no contexto de 1961 a 1974. Esta delimitação histórica se justifica pelo fato de se tratar de um período, marcado pelas crises cíclicas do capital e seus respectivos impactos na fase final do processo de industrialização no Brasil: inicia-se com um dos ápices do crescimento econômico no país, impulsionado pelo nacional desenvolvimentismo, prossegue com uma severa crise política em 1966, impactando também na esfera econômica e por fim, com a constante busca pela estabilidade econômica que mesmo sob altos preços, eclodem os fatores que conduziram a economia brasileira para o contexto do “Milagre Econômico”. Para isso, fez-se necessária a articulação do debate entre educação e trabalho sob a perspectiva do materialismo histórico dialético e seus respectivos subsídios teórico-metodológicos e epistemológicos. No primeiro capítulo, foi elaborado um “estado da arte” da categoria “formação humana”, pensada enquanto processo educacional e histórico, a partir dos pressupostos marxistas, visando a reconstrução de conceitos e significados do que consiste a formação de trabalhadores na lógica contraditória, pelo viés da formação integral e pela perspectiva da acumulação de capital. Em seguida, no segundo capítulo, foi elaborada uma análise acerca da industrialização, do empresariado industrial e sua perspectiva de desenvolvimento de 1961 a 1974. No terceiro capítulo, foi

  3. Gap analysis of industrial energy management systems in Slovenia

    International Nuclear Information System (INIS)

    Pusnik, Matevz; Al-Mansour, Fouad; Sucic, Boris; Gubina, A.F.

    2016-01-01

    Industrial energy management systems, which comprise software solutions, upfront services, and ongoing monitoring and management, enable industrial companies to actively manage their energy consumption and energy procurement activities. Energy management systems are usually tailored to the specific industrial needs but may offer limited functionalities, mostly as a result of different identified gaps (process simplifications, improper measurement points, a lack of motivation, etc.). A survey was conducted in order to analyse the gaps and use of energy management systems in Slovenian industry. The results of the survey presented in this paper demonstrate that the use of energy management systems in industry is recognised as a potential competitive advantage by most of the addressed companies. Furthermore, motivation was highlighted as an important prerequisite for process and structural improvements and reported to be thus far insufficiently addressed. Furthermore, the importance of strong cooperation with actors at different levels of industry, namely the executive and shop floor levels, is addressed. In the conclusion, possibilities for new opportunities in the exploitation of energy efficiency through the use of industrial energy management systems are discussed. - Highlights: • Investigating gaps and evaluation of EMS use in Slovenian industry. • Analysis based on the developed self-assessment tool 3EMT. • Existing EMS do not include all the requirements for the industrial operations. • Constructive cooperation between all stakeholders is of crucial importance.

  4. A specimen of <em>Sorex> cfr. <em>samniticus> in Barn Owl's pellets from Murge plateau (Apulia, Italy / Su di un <em>Sorex> cfr. <em>samniticus> (Insectivora, Soricidae rinvenuto in borre di <em>Tyto albaem> delle Murge (Puglia, Italia

    Directory of Open Access Journals (Sweden)

    Giovanni Ferrara

    1992-07-01

    Full Text Available Abstract In a lot of Barn Owl's pellets from the Murge plateau a specimen of <em>Sorex> sp. was detected. Thank to some morphological and morphometrical features, the cranial bones can be tentatively attributed to <em>Sorex samniticusem> Altobello, 1926. The genus <em>Sorex> was not yet included in the Apulia's fauna southwards of the Gargano district; the origin and significance of the above record is briefly discussed, the actual presence of a natural population of <em>Sorex> in the Murge being not yet proved. Riassunto Viene segnalato il rinvenimento di un esemplare di <em>Sorex> cfr. <em>samniticus> da borre di <em>Tyto albaem> delle Murge. Poiché il genere non era stato ancora segnalato nella Puglia a sud del Gargano, viene discusso il significato faunistico del reperto.

  5. Efecto de extractos vegetales de <em>Polygonum hydropiperoidesem>, <em>Solanum nigrumem> y <em>Calliandra pittieriem> sobre el gusano cogollero (<em>Spodoptera frugiperdaem>

    Directory of Open Access Journals (Sweden)

    Lizarazo H. Karol

    2008-12-01

    Full Text Available

    El gusano cogollero <em>Spodoptera frugiperdaem> es una de las plagas que más afectan los cultivos en la región de Sumapaz (Cundinamarca, Colombia. En la actualidad se controla principalmente aplicando productos de síntesis química, sin embargo la aplicación de extractos vegetales surge como una alternativa de menor impacto sobre el ambiente. Este control se emplea debido a que las plantas contienen metabolitos secundarios que pueden inhibir el desarrollo de los insectos. Por tal motivo, la presente investigación evaluó el efecto insecticida y antialimentario de extractos vegetales de barbasco <em>Polygonum hydropiperoidesem> (Polygonaceae, carbonero <em>Calliandra pittieriem> (Mimosaceae y hierba mora <em>Solanum nigrumem> (Solanaceae sobre larvas de <em>S. frugiperdaem> biotipo maíz. Se estableció una cría masiva del insecto en el laboratorio utilizando una dieta natural con hojas de maíz. Posteriormente se obtuvieron extractos vegetales utilizando solventes de alta polaridad (agua y etanol y media polaridad (diclorometano los cuales se aplicaron sobre las larvas de segundo instar. Los resultados más destacados se presentaron con extractos de <em>P. hydropiperoidesem>, obtenidos con diclorometano en sus diferentes dosis, con los cuales se alcanzó una mortalidad de 100% 12 días después de la aplicación y un efecto antialimentario representado por un consumo de follaje de maíz inferior al 4%, efectos similares a los del testigo comercial (Clorpiriphos.

  6. Rapid Development of Microsatellite Markers with 454 Pyrosequencing in a Vulnerable Fish<em>,> the Mottled Skate<em>, Raja em>pulchra>

    Directory of Open Access Journals (Sweden)

    Jung-Ha Kang

    2012-06-01

    Full Text Available The mottled skate, <em>Raja pulchraem>, is an economically valuable fish. However, due to a severe population decline, it is listed as a vulnerable species by the International Union for Conservation of Nature. To analyze its genetic structure and diversity, microsatellite markers were developed using 454 pyrosequencing. A total of 17,033 reads containing dinucleotide microsatellite repeat units (mean, 487 base pairs were identified from 453,549 reads. Among 32 loci containing more than nine repeat units, 20 primer sets (62% produced strong PCR products, of which 14 were polymorphic. In an analysis of 60 individuals from two <em>R. pulchra em>populations, the number of alleles per locus ranged from 1–10, and the mean allelic richness was 4.7. No linkage disequilibrium was found between any pair of loci, indicating that the markers were independent. The Hardy–Weinberg equilibrium test showed significant deviation in two of the 28 single-loci after sequential Bonferroni’s correction. Using 11 primer sets, cross-species amplification was demonstrated in nine related species from four families within two classes. Among the 11 loci amplified from three other <em>Rajidae> family species; three loci were polymorphic. A monomorphic locus was amplified in all three <em>Rajidae> family species and the <em>Dasyatidae> family. Two <em>Rajidae> polymorphic loci amplified monomorphic target DNAs in four species belonging to the Carcharhiniformes class, and another was polymorphic in two Carcharhiniformes species.

  7. Effects of grit roughness and pitch oscillations on the S814 airfoil

    Energy Technology Data Exchange (ETDEWEB)

    Janiszewska, J.M.; Ramsay, R.R.; Hoffmann, M.J.; Gregorek, G.M. [Ohio State Univ., Columbus, OH (United States)

    1996-07-01

    Horizontal-axis wind turbine rotors experience unsteady aerodynamics when the rotor is yawed, when rotor blades pass through the support tower wake, and when the wind is gusting. An understanding of this unsteady behavior is necessary to assist in the design of new rotor airfoils. The rotors also experience performance degradation due to surface roughness. These surface irregularities are due to the accumulation of insect debris, ice, and/or the aging process. Wind tunnel studies that examine both the steady and unsteady behavior of airfoils can help define pertinent flow phenomena, and the resultant data can also be used to validate analytical computer codes. An S814 airfoil model was tested in The Ohio State University Aeronautical and Astronautical Research Laboratory (OSU/AARL) 3 X 5 subsonic wind tunnel (3 X 5) under steady flow with both stationary model conditions and pitch oscillations. To study the extent of performance loss due to surface roughness, a leading edge grit roughness pattern (LEGR) was used to simulate leading edge contamination. After baseline cases were completed, the LEGR was applied for both steady state and model pitch oscillation cases. The Reynolds numbers for steady state conditions were 0.75, 1, 1.25 and 1.5 million, while the angle of attack ranged from -20{degrees} to +40{degrees}. While the model underwent pitch oscillations, data were acquired at Reynolds numbers of 0.75, 1, 1.25, and 1.5 million, at frequencies of 0.6, 1.2, and 1.8 Hz. Two sine wave forcing functions {+-}5.5{degrees} and {+-}10{degrees}, were used; at mean angles of attack of 8{degrees}, 14{degrees}, and 20{degrees}. For purposes herein, any reference to unsteady conditions means the model was in pitch oscillation.

  8. Effects of grit roughness and pitch oscillations on the S801 airfoil

    Energy Technology Data Exchange (ETDEWEB)

    Ramsay, R.R.; Hoffman, M.J.; Gregorek, G.M. [Ohio State Univ., Columbus, OH (United States)

    1996-01-01

    Horizontal axis wind turbine rotors experience unsteady aerodynamics due to wind shear when the rotor is yawed, when rotor blades pass through the support tower wake, and when the wind is gusting. An understanding of this unsteady behavior is necessary to assist in the calculation of rotor performance and loads. The rotors also experience performance degradation due to surface roughness. These surface irregularities are due to the accumulation of insect debris, ice, and the aging process. Wind tunnel studies that examine both the steady and unsteady behavior of airfoils can help define pertinent flow phenomena, and the resultant data can be used to validate analytical computer codes. A S801 airfoil model was tested in The Ohio State University Aeronautical and Astronautical Research Laboratory (OSU/AARL) 3x5 subsonic wind tunnel (3x5) under steady flow and stationary model conditions, as well as with the model undergoing pitch oscillations. To study the possible extent of performance loss due to surface roughness, a standard grit pattern (LEGR) was used to simulate leading edge contamination. After baseline cases were completed, the LEGR was applied for both steady state and model pitch oscillation cases. The Reynolds numbers used for steady state conditions were 0.75, 1, 1.25, and 1.5 million, while the angle of attack ranged from -20{degrees} to +40{degrees}. With the model undergoing pitch oscillations, data were acquired at Reynolds numbers of 0.75, 1, 1.25, and 1.4 million, at frequencies of 0.6, 1.2, and 1.8 Hz. Two sine wave forcing functions were used, {plus_minus} 5.5 {degrees}and {plus_minus} 10{degrees}, at mean angles of attack of 8{degrees} 14{degrees} and 20{degrees} For purposes herein, any reference to unsteady conditions means that the airfoil model was in pitch oscillation about the quarter chord.

  9. Effects of grit roughness and pitch oscillations on the S815 airfoil

    Energy Technology Data Exchange (ETDEWEB)

    Reuss Ramsay, R.; Hoffman, M.J.; Gregorek, G.M. [Ohio State Univ., Columbus, OH (United States)

    1996-07-01

    Horizontal axis wind turbine rotors experience unsteady aerodynamics due to wind shear when the rotor is yawed, when rotor blades pass through the support tower wake, and when the wind is gusting. An understanding of this unsteady behavior is necessary to assist in the calculation of rotor performance and loads. The rotors also experience performance degradation due to surface roughness. These surface irregularities are cause by the accumulation of insect debris, ice, and the aging process. Wind tunnel studies that examine both the steady and unsteady behavior of airfoils can help define pertinent flow phenomena, and the resultant data can be used to validate analytical computer codes. A S815 airfoil model was tested in The Ohio State University Aeronautical and Astronautical Research Laboratory (OSU/AARL) 3 x 5 subsonic wind tunnel (3 x 5) under steady flow and stationary model conditions, as well as with the model undergoing pitch oscillations. To study the possible extent of performance loss due to surface roughness, a standard grit pattern (LEGR) was used to simulate leading edge contamination. After baseline cases were completed, the LEGR was applied for both steady state and model pitch oscillation cases. The Reynolds numbers used for steady state conditions were 0.75, 1, 1.25, and 1.4 million, while the angle of attack ranged from {minus}20{degree} to +40{degree}. With the model undergoing pitch oscillations, data were acquired at Reynolds numbers of 0.75, 1, 1.25, and 1.4 million, at frequencies of 0.6, 1.2, and 1.8 Hz. Two sine wave forcing functions were used; {+-}5.5{degree} and {+-}10{degree}, at mean angles of attack of 8{degree}, 14{degree}, and 20{degree}. For purposes herein, any reference to unsteady conditions means that the model was in pitch oscillation about the quarter chord.

  10. EM International, July 1994, Volume 2

    International Nuclear Information System (INIS)

    1994-01-01

    The Office of Environmental Management (EM) at the Department of Energy (DOE) is seeking out and leveraging foreign technology, data, and resources in keeping with EM's mandate to protect public health and the environment through the safe and cost-effective remediation of the Department's nuclear weapons sites. EM works closely with foreign governments, industry, and universities to obtain innovative environmental technologies, scientific and engineering expertise, and operations experience that will support EM's objectives. Where appropriate, these international resources are used to manage the more urgent risks at our sites, secure a safe workplace, help build consensus on critical issues, and strengthen our technology development program. Through international agreements EM engages in cooperative exchange of information, technology, and individuals. Currently, we are managing agreements with a dozen countries in Europe, Latin America, and Asia. These agreements focus on environmental restoration, waste management, transportation of radioactive wastes, and decontamination and decommissioning. This publication contains the following articles: in situ remediation integrated program; in-situ characterization and inspection of tanks; multimedia environmental pollutant assessment system (MEPAS); LLNL wet oxidation -- AEA technology. Besides these articles, this publication covers: EU activities with Russia; technology transfer activities; and international organization activities

  11. A New Natural Lactone from <em>Dimocarpus> <em>longan> Lour. Seeds

    Directory of Open Access Journals (Sweden)

    Zhongjun Li

    2012-08-01

    Full Text Available A new natural product named longanlactone was isolated from <em>Dimocarpus> <em>longan> Lour. seeds. Its structure was determined as 3-(2-acetyl-1<em>H>-pyrrol-1-yl-5-(prop-2-yn-1-yldihydrofuran-2(3H-one by spectroscopic methods and HRESIMS.

  12. Purification, Characterization and Antioxidant Activities <em>in Vitroem>> em>and <em>in Vivoem> of the Polysaccharides from <em>Boletus edulisem> Bull

    Directory of Open Access Journals (Sweden)

    Yijun Fan

    2012-07-01

    Full Text Available A water-soluble polysaccharide (BEBP was extracted from <em>Boletus edulis em>Bull using hot water extraction followed by ethanol precipitation. The polysaccharide BEBP was further purified by chromatography on a DEAE-cellulose column, giving three major polysaccharide fractions termed BEBP-1, BEBP-2 and BEBP-3. In the next experiment, the average molecular weight (Mw, IR and monosaccharide compositional analysis of the three polysaccharide fractions were determined. The evaluation of antioxidant activities both <em>in vitroem> and <em>in vivo em>suggested that BEBP-3 had good potential antioxidant activity, and should be explored as a novel potential antioxidant.

  13. OCORRÊNCIA DE ENTEROPARASITAS EM COLORÍFICO COMERCIALIZADO EM VITÓRIA DA CONQUISTA – BAHIA

    Directory of Open Access Journals (Sweden)

    REGINA MáRCIA AMORIM DE SOUZA

    2009-12-01

    Full Text Available

    Os métodos caseiros de produção do colorífico e sua comercialização sem condições higiênico-sanitária podem representar importante fonte de contaminação e disseminação de enteroparasitas. Dessa forma a identifi cação laboratorial de protozoários e helmintos em colorífi co é de grande importância para a saúde pública, pois analisa as condições higiênicas envolvidas na sua produção, armazenamento, transporte, manipulação e comercialização. O presente trabalho objetivou identifi car a ocorrência de estruturas parasitárias em colorífi co caseiro e industrial comercializados em feiras livres e em supermercados de Vitória da Conquista-Bahia. Para tanto foram coletadas no período de junho e julho 105 amostras de colorífi co em estabelecimentos comerciais localizados na cidade. As amostras do pigmento em estudo foram submetidas a análises para pesquisa de enteroparasitas no Laboratório de Parasitologia da UESB, através dos métodos de Sedimentação Espontânea e de Carvalho et al.3 Resultados negativos para enteroparasitas foram obtidos em todas as amostras. De acordo com a Resolução da ANVISA RDC n°276,2 de 22 de setembro de 2005, as amostras de colorífi co artesanal e industrial apresentam condições sanitárias satisfatórias de acordo a legislação vigente para parasitos e larvas.

  14. <em>Angiostrongylus vasorumem> in red foxes (<em>Vulpes vulpesem> and badgers (<em>Meles melesem> from Central and Northern Italy

    Directory of Open Access Journals (Sweden)

    Marta Magi

    2010-06-01

    Full Text Available Abstract During 2004-2005 and 2007-2008, 189 foxes (<em>Vulpes vulpesem> and 6 badgers (<em>Meles melesem> were collected in different areas of Central Northern Italy (Piedmont, Liguria and Tuscany and examined for <em>Angiostrongylus vasorumem> infection. The prevalence of the infection was significantly different in the areas considered, with the highest values in the district of Imperia (80%, Liguria and in Montezemolo (70%, southern Piedmont; the prevalence in Tuscany was 7%. One badger collected in the area of Imperia turned out to be infected, representing the first report of the parasite in this species in Italy. Further studies are needed to evaluate the role played by fox populations as reservoirs of infection and the probability of its spreading to domestic dogs.
    Riassunto <em>Angiostrongylus vasorumem> nella volpe (<em>Vulpes vulpesem> e nel tasso (<em>Meles melesem> in Italia centro-settentrionale. Nel 2004-2005 e 2007-2008, 189 volpi (<em>Vulpes vulpesem> e 6 tassi (<em>Meles melesem> provenienti da differenti aree dell'Italia settentrionale e centrale (Piemonte, Liguria Toscana, sono stati esaminati per la ricerca di <em>Angiostrongylus vasorumem>. La prevalenza del nematode è risultata significativamente diversa nelle varie zone, con valori elevati nelle zone di Imperia (80% e di Montezemolo (70%, provincia di Cuneo; la prevalenza in Toscana è risultata del 7%. Un tasso proveniente dall'area di Imperia è risultato positivo per A. vasorum; questa è la prima segnalazione del parassita in tale specie in Italia. Ulteriori studi sono necessari per valutare il potenziale della volpe come serbatoio e la possibilità di diffusione della parassitosi ai cani domestici.

    doi:10.4404/hystrix-20.2-4442

  15. Assessment of Genetic Fidelity in <em>Rauvolfia em>s>erpentina em>Plantlets Grown from Synthetic (Encapsulated Seeds Following <em>in Vitroem> Storage at 4 °C

    Directory of Open Access Journals (Sweden)

    Mohammad Anis

    2012-05-01

    Full Text Available An efficient method was developed for plant regeneration and establishment from alginate encapsulated synthetic seeds of <em>Rauvolfia serpentinaem>. Synthetic seeds were produced using <em>in vitroem> proliferated microshoots upon complexation of 3% sodium alginate prepared in Llyod and McCown woody plant medium (WPM and 100 mM calcium chloride. Re-growth ability of encapsulated nodal segments was evaluated after storage at 4 °C for 0, 1, 2, 4, 6 and 8 weeks and compared with non-encapsulated buds. Effects of different media <em>viz>; Murashige and Skoog medium; Lloyd and McCown woody Plant medium, Gamborg’s B5 medium and Schenk and Hildebrandt medium was also investigated for conversion into plantlets. The maximum frequency of conversion into plantlets from encapsulated nodal segments stored at 4 °C for 4 weeks was achieved on woody plant medium supplement with 5.0 μM BA and 1.0 μM NAA. Rooting in plantlets was achieved in half-strength Murashige and Skoog liquid medium containing 0.5 μM indole-3-acetic acid (IAA on filter paper bridges. Plantlets obtained from stored synseeds were hardened, established successfully <em>ex vitroem> and were morphologically similar to each other as well as their mother plant. The genetic fidelity of <em>Rauvolfia em>clones raised from synthetic seeds following four weeks of storage at 4 °C were assessed by using random amplified polymorphic<em> em>DNA (RAPD and inter-simple sequence repeat<em> em>(ISSR markers. All the RAPD and ISSR profiles from generated plantlets were monomorphic and comparable<em> em>to the mother plant, which confirms the genetic<em> em>stability among the clones. This synseed protocol could be useful for establishing a particular system for conservation, short-term storage and production of genetically identical and stable plants before it is released for commercial purposes.

  16. Sulla presenza di <em>Sorex antinoriiem>, <em>Neomys anomalusem> (Insectivora, Soricidae e <em>Talpa caecaem> (Insectivora, Talpidae in Umbria

    Directory of Open Access Journals (Sweden)

    A.M. Paci

    2003-10-01

    Full Text Available Lo scopo del contributo è di fornire un aggiornamento sulla presenza del Toporagno del Vallese <em>Sorex antinoriiem>, del Toporagno acquatico di Miller <em>Neomys anomalusem> e della Talpa cieca <em>Talpa caecaem> in Umbria, dove le specie risultano accertate ormai da qualche anno. A tal fine sono stati rivisitati i reperti collezionati e la bibliografia conosciuta. Toporagno del Vallese: elevato di recente a livello di specie da Brünner et al. (2002, altrimenti considerato sottospecie del Toporagno comune (<em>S. araneus antinoriiem>. È conservato uno di tre crani incompleti (mancano mandibole ed incisivi superiori al momento prudenzialmente riferiti a <em>Sorex> cfr. <em>antinorii>, provenienti dall?Appennino umbro-marchigiano settentrionale (dintorni di Scalocchio - PG, 590 m. s.l.m. e determinati sulla base della pigmentazione rossa degli ipoconi del M1 e M2; Toporagno acquatico di Miller: tre crani (Breda in Paci e Romano op. cit. e un esemplare intero (Paci, ined. sono stati trovati a pochi chilometri di distanza gli uni dall?altro tra i comuni di Assisi e Valfabbrica, in ambienti mediocollinari limitrofi al Parco Regionale del M.te Subasio (Perugia. In provincia di Terni la specie viene segnalata da Isotti (op. cit. per i dintorni di Orvieto. Talpa cieca: sono noti una femmina e un maschio raccolti nel comune di Pietralunga (PG, rispettivamente in una conifereta a <em>Pinus nigraem> (m. 630 s.l.m. e nelle vicinanze di un bosco misto collinare a prevalenza di <em>Quercus cerrisem> (m. 640 s.l.m.. Recentemente un terzo individuo è stato rinvenuto nel comune di Sigillo (PG, all?interno del Parco Regionale di M.te Cucco, sul margine di una faggeta a 1100 m s.l.m. In entrambi i casi l?areale della specie è risultato parapatrico con quello di <em>Talpa europaeaem>.

  17. Four Novel Cellulose Synthase (CESA Genes from <em>Birch> (<em>Betula platyphylla em>Suk. Involved in Primary and Secondary Cell Wall Biosynthesis

    Directory of Open Access Journals (Sweden)

    Xuemei Liu

    2012-09-01

    Full Text Available Cellulose synthase (CESA, which is an essential catalyst for the generation of plant cell wall biomass, is mainly encoded by the <em>CesA> gene family that contains ten or more members. In this study; four full-length cDNAs encoding CESA were isolated from<em> Betula platyphyllaem> Suk., which is an important timber species, using RT-PCR combined with the RACE method and were named as <em>BplCesA3em>, <em>−4em>,> −7 em>and> −8em>. These deduced CESAs contained the same typical domains and regions as their <em>Arabidopsis> homologs. The cDNA lengths differed among these four genes, as did the locations of the various protein domains inferred from the deduced amino acid sequences, which shared amino acid sequence identities ranging from only 63.8% to 70.5%. Real-time RT-PCR showed that all four <em>BplCesAs> were expressed at different levels in diverse tissues. Results indicated that BplCESA8 might be involved in secondary cell wall biosynthesis and floral development. BplCESA3 appeared in a unique expression pattern and was possibly involved in primary cell wall biosynthesis and seed development; it might also be related to the homogalacturonan synthesis. BplCESA7 and BplCESA4 may be related to the formation of a cellulose synthase complex and participate mainly in secondary cell wall biosynthesis. The extremely low expression abundance of the four BplCESAs in mature pollen suggested very little involvement of them in mature pollen formation in <em>Betula>. The distinct expression pattern of the four <em>BplCesAs> suggested they might participate in developments of various tissues and that they are possibly controlled by distinct mechanisms in <em>Betula.>

  18. Microsatellite Loci in the Gypsophyte <em>Lepidium subulatum em>(Brassicaceae, and Transferability to Other <em>Lepidieae>

    Directory of Open Access Journals (Sweden)

    José Gabriel Segarra-Moragues

    2012-09-01

    Full Text Available Polymorphic microsatellite markers were developed for the Ibero-North African, strict gypsophyte <em>Lepidium subulatumem> to unravel the effects of habitat fragmentation in levels of genetic diversity, genetic structure and gene flow among its populations. Using 454 pyrosequencing 12 microsatellite loci including di- and tri-nucleotide repeats were characterized in <em>L. subulatumem>. They amplified a total of 80 alleles (2–12 alleles per locus in a sample of 35 individuals of <em>L. subulatumem>, showing relatively high levels of genetic diversity, <em>H>O = 0.645, <em>H>E = 0.627. Cross-species transferability of all 12 loci was successful for the Iberian endemics <em>Lepidium cardaminesem>, <em>Lepidium stylatumem>, and the widespread, <em>Lepidium graminifoliumem> and one species each of two related genera, <em>Cardaria drabaem> and <em>Coronopus didymusem>. These microsatellite primers will be useful to investigate genetic diversity, population structure and to address conservation genetics in species of <em>Lepidium>.

  19. A study of the sensitivity of an imaging telescope (GRITS) for high energy gamma-ray astronomy. Final report

    International Nuclear Information System (INIS)

    Yearian, M.R.

    1990-08-01

    When a gamma-ray telescope is placed in Earth orbit, it is bombarded by a flux of cosmic protons much greater than the flux of interesting gammas. These protons can interact in the telescope's thermal shielding to produce detectable gamma rays, most of which are vetoed. Since the proton flux is so high, the unvetoed gamma rays constitute a significant background relative to some weak sources. This background increases the observing time required to pinpoint some sources and entirely obscures other sources. Although recent telescopes have been designed to minimize this background, its strength and spectral characteristics were not previously calculated in detail. Monte Carlo calculations are presented which characterize the strength, spectrum and other features of the cosmic proton background using FLUKA, a hadronic cascade program. Several gamma-ray telescopes, including SAS-2, EGRET and the Gamma Ray Imaging Telescope System (GRITS), are analyzed, and their proton-induced backgrounds are characterized. In all cases, the backgrounds are either shown to be low relative to interesting signals or suggestions are made which would reduce the background sufficiently to leave the telescope unimpaired. In addition, several limiting cases are examined for comparison to previous estimates and calibration measurements

  20. Effects of grit roughness and pitch oscillations on the LS(1)-0421MOD airfoil

    Energy Technology Data Exchange (ETDEWEB)

    Reuss, R.L.; HOffman, M.J.; Gregorek, G.M. [Ohio State Univ., Columbus, OH (United States)

    1995-12-01

    An LS(1)-0421 MOD airfoil model was tested in The Ohio State University Aeronautical and Astronautical Research Laboratory (OSU/AARL) 3{times}5 subsonic wind tunnel (3{times}5) under steady flow and stationary model conditions, and also with the model undergoing pitch oscillations. In order to study the possible extent of performance loss due to surface roughness, a leading edge grit roughness (LEGR) pattern was developed to simulate leading edge contamination. After baseline cases were completed, the LEGR was applied for both steady state and model pitch oscillation cases. The Reynolds numbers for steady state conditions were 0.75, 1, and 1.25 million, while the angle of attack ranged from {minus}10{degrees} to +40{degrees}. With the model undergoing pitch oscillations, data was acquired at Reynolds numbers of 0.75, 1, 1.25, and 1.5 million, at frequencies of 0.6, 1.2, and 1.8 Hz. Two sine wave forcing functions were used; {plus_minus} 5.5{degrees} and {plus_minus} 10{degrees}, at mean angles of attack of 8{degrees}, 14{degrees}, and 20{degrees}. For this report, unsteady conditions refer to the model in pitch oscillation. In general, the maximum unsteady lift coefficient was from 10% to 50% higher than the steady state maximum lift coefficient. Variation in the quarter chord pitching moment coefficient was nearly two times greater than steady state values at high angles of attack. These findings indicate the importance of considering the unsteady flow behavior occurring in wind turbine operation for accurate load estimates.

  1. Constituents from <em>Vigna em>vexillata> and Their Anti-Inflammatory Activity

    Directory of Open Access Journals (Sweden)

    Guo-Feng Chen

    2012-08-01

    Full Text Available The seeds of <em>Vigna em>genus are important food resources and there have already been many reports regarding their bioactivities. In our preliminary bioassay, the chloroform layer of methanol extracts of<em> V. vexillata em>demonstrated significant anti-inflammatory bioactivity. Therefore, the present research is aimed to purify and identify the anti-inflammatory principles of <em>V. vexillataem>. One new sterol (1 and two new isoflavones (2,3 were reported from the natural sources for the first time and their chemical structures were determined by the spectroscopic and mass spectrometric analyses. In addition, 37 known compounds were identified by comparison of their physical and spectroscopic data with those reported in the literature. Among the isolates, daidzein (23, abscisic acid (25, and quercetin (40 displayed the most significant inhibition of superoxide anion generation and elastase release.

  2. Synthesis, Crystal Structure and Luminescent Property of Cd (II Complex with <em>N-Benzenesulphonyl-L>-leucine

    Directory of Open Access Journals (Sweden)

    Xishi Tai

    2012-09-01

    Full Text Available A new trinuclear Cd (II complex [Cd3(L6(2,2-bipyridine3] [L =<em> Nem>-phenylsulfonyl-L>-leucinato] has been synthesized and characterized by elemental analysis, IR and X-ray single crystal diffraction analysis. The results show that the complex belongs to the orthorhombic, space group<em> Pem>212121 with<em> aem> = 16.877(3 Å, <em>b> em>= 22.875(5 Å, <em>c em>= 29.495(6 Å, <em>α> em>= <emem>= <emem>= 90°, <em>V> em>= 11387(4 Å3, <em>Z> em>= 4, <em>Dc>= 1.416 μg·m−3, <emem>= 0.737 mm−1, <em>F> em>(000 = 4992, and final <em>R>1 = 0.0390, <em>ωR>2 = 0.0989. The complex comprises two seven-coordinated Cd (II atoms, with a N2O5 distorted pengonal bipyramidal coordination environment and a six-coordinated Cd (II atom, with a N2O4 distorted octahedral coordination environment. The molecules form one dimensional chain structure by the interaction of bridged carboxylato groups, hydrogen bonds and p-p interaction of 2,2-bipyridine. The luminescent properties of the Cd (II complex and <em>N-Benzenesulphonyl-L>-leucine in solid and in CH3OH solution also have been investigated.

  3. Influence of surface roughness of stainless steel on microbial adhesion and corrosion resistance

    DEFF Research Database (Denmark)

    Hilbert, Lisbeth Rischel; Bagge-Ravn, Dorthe; Kold, John

    2003-01-01

    Abstract The aim of this study was to evaluate if hygienic characteristics of stainless steel used in the food industry could be improved by smoothing surface roughness from an Ra of 0.9 to 0.01 ƒÝm. The adherence of Pseudomonas sp., Listeria monocytogenes and Candida lipolytica to stainless steel...... was not affected by surface roughness (Ra) ranging from grit 4000 polished stainless steel (Ra steel (Ra 0.9). Neither adhesion of Ps. aeruginosa nor its removal by an alkaline commercial cleaner in a flow system was affected by surface roughness. Pitting corrosion resistance...... was evaluated in a commercial disinfectant and in 1 M NaCl. Electropolished and grit 4000 polished steel proved more corrosion resistant as opposed to grit 80 and 120 polished surfaces. In conclusion, the surface finish did not influence bacterial attachment, colonisation, or removal, but is an important...

  4. <em>N>-Substituted 5-Chloro-6-phenylpyridazin-3(2<em>H>-ones: Synthesis, Insecticidal Activity Against <em>Plutella xylostella em>(L. and SAR Study

    Directory of Open Access Journals (Sweden)

    Song Yang

    2012-08-01

    Full Text Available A series of <em>N>-substituted 5-chloro-6-phenylpyridazin-3(2<em>H>-one derivatives were synthesized based on our previous work; all compounds were characterized by spectral data and tested for <em>in vitroem> insecticidal activity against <em>Plutella xylostellaem>. The results showed that the synthesized pyridazin-3(2<em>H>-one compounds possessed good insecticidal activities, especially the compounds 4b, 4d, and 4h which showed > 90% activity at 100 mg/L. The structure-activity relationships (SAR for these compounds were also discussed.

  5. Investigating ethnic minorities' perceptions of safety climate in the construction industry.

    Science.gov (United States)

    Chan, Albert P C; Wong, Francis K W; Hon, Carol K H; Lyu, Sainan; Javed, Arshad Ali

    2017-12-01

    An increasing number of ethnic minorities (EMs) have been employed in the construction industry to alleviate severe labor shortages in many countries. Unfortunately, statistics show that EMs have higher fatal and non-fatal occupational injury rates than their local counterparts. However, EMs are often underrepresented in safety climate (SC) research as they are difficult to reach and gauge their perception. A positive relationship has been widely found between SC and safety performance. Understanding the safety perceptions of EMs helps to reduce injuries and improve their safety performance. Based on a sample of 320 EMs from 20 companies in the construction industry, exploratory factor analysis (EFA) and confirmatory factor analysis (CFA) were used to identify the SC factors of EMs, and validate the extracted factors, respectively. Multivariate analysis of variance was undertaken to examine mean differences in perceptions of SC by personal characteristics. Three SC factors for EMs encapsulating 16 variables were identified through EFA. The hypothesized CFA model for a three-factor structure derived from EFA showed a satisfactory goodness-of-fit, composite reliability, and construct validity. Three SC factors were identified, namely: (a) safety management commitment, safety resources, and safety communication; (b) employee's involvement and workmate's influence; and (c) perception of safety rules, procedures and risks. The perceptions of SC differed significantly by nationality, marital status, the number of family members supported, and drinking habit. This study reveals the perception of EMs toward SC. The findings highlight the areas for safety improvement and provide leading indicators for safety performance of EMs. The findings are also enlightening for countries with a number of EMs, such as the United Sates, the United Kingdom, Australia, Singapore, and the Middle East. Copyright © 2017. Published by Elsevier Ltd.

  6. DOE EM industry programs robotics development

    International Nuclear Information System (INIS)

    Staubly, R.; Kothari, V.

    1998-01-01

    The Office of Science and Technology (OST) manages an aggressive program for RD and D, as well as testing and evaluation for the Department of Energy's (DOE's) Environmental Management (EM) organization. The goal is to develop new and improved environmental restoration and waste management technologies to clean up the inventory of the DOE weapons complex faster, safer, and cheaper than is possible with currently available technologies. Robotic systems reduce worker exposure to the absolute minimum, while providing proven, cost-effective, and, for some applications, the only acceptable technique for addressing challenging problems. Development of robotic systems for remote operations occurs in three main categories: tank waste characterization and retrieval; decontamination and dismantlement; and characterization, mapping, and inspection systems. In addition, the Federal Energy Technology Center (FETC) has some other projects which fall under the heading of supporting R and D. The central objective of all FETC robotic projects is to make robotic systems more attractive by reducing costs and health risks associated with the deployment of robotic technologies in the cleanup of the nuclear weapons complex. This will be accomplished through development of robots that are cheaper, faster, safer, and more reliable, as well as more straightforward to modify/adapt and more intuitive to operate with autonomous capabilities and intelligent controls that prevent accidents and optimize task execution

  7. A multidimensional conspiracy around the software industry: arguments for intervention in high technology sectors

    Directory of Open Access Journals (Sweden)

    Emerson Wilian Araújo

    2010-12-01

    Full Text Available This paper analyses the current debate about governmental intervention in high tech industries. On one hand, there are arguments against such interventions that consider the high tech industries as a capital intensive sector; instead of technological intensity, the capital intensity determines the value added. On the other hand, we could prove that there is at least one high tech industry, which is job intensive and non capital intensive, with high value added, that generates several positive externalities (the software industry. Such externalities are important arguments to support governmental intervention in high tech industries and cast doubts on the capital’s value added argument.Este artigo analisa o debate atual relacionado à intervenção estatal nas indústrias de alta intensidade tecnológica. Por um lado, existem argumentos contra tais intervenções que consideram essas indústrias setores também intensivos em capital. Ao contrário do que se pensa, para esta corrente, a intensidade de capital – e não a tecnológica – seria o fator determinante da adição de valor. Por ouro lado, foi possível provar, neste trabalho, que existe ao menos uma indústria de alta intensidade tecnológica, intensiva em trabalho e não em capital, com alto valor adicionado, que gera diversas externalidades positivas em âmbitos social e econômico: a indústria de software. Tais externalidades servem como importantes argumentos para justificar a intervenção estatal em setores de alta intensidade tecnológica e lança dúvidas sobre o argumento da exclusividade do capital como determinante de adição de valor.

  8. Mudanças em regimes industriais e acumulação de capacidades tecnológicas: evidências de empresas de celulose e papel no Brasil Changes in industrial regimes and accumulation of technological capabilities: evidence from pulp and paper firms in Brazil

    Directory of Open Access Journals (Sweden)

    Claudia Teresa Carvajal García

    2009-12-01

    Full Text Available A despeito da profusão de estudos sobre capacidade tecnológica em nível de empresas ao longo dos últimos 30 anos, há escassez de estudos sobre similaridades e diferenças entre empresas do mesmo setor industrial, em termos de acumulação de capacidades tecnológicas e suas implicações para o aprimoramento de indicadores de performance técnico-econômica ao longo de diferentes regimes industriais, especialmente no contexto de países de industrialização recente, como é o caso do Brasil. Baseando-se em evidências de primeira mão colhidas à base de extensivos trabalhos de campo, este artigo examina essas questões em três grandes empresas de celulose e papel no Brasil (1970-2004. O estudo encontrou: (1 Diferenças inter e intraempresariais em termos da maneira e velocidade de acumulação de capacidades para funções tecnológicas específicas ao longo dos diferentes períodos; (2 Tais diferenças refletiram-se, com diferentes graus de intensidade, no aprimoramento dos indicadores de performance técnico-econômica; (3 As empresas responderam positivamente às mudanças para uma economia aberta partir dos anos 1990; (4 Porém, os aprimoramentos em seus indicadores de performance técnico-econômica não derivaram das mudanças do regime industrial per se, mas, principalmente, dos seus esforços internos para acumulação tecnológica.Despite the profusion of studies of firm-level technological capabilities studies, over the past 30 years, there is a scarcity of analyses on similarities and differences across firms, of the same industrial sector, in terms of types and levels, direction and rate of accumulation of technological capabilities and their implications for the improvement of techno-economic performance across different industrial regimes, especially in the context of late-industrializing countries, as it is the case of Brazil. Based on first-hand qualitative and quantitative empirical evidence, collected on the basis of

  9. Pequena empresa e ambiente organizacional externo pela ótica das teorias da organização industrial e da visão baseada em recursos

    OpenAIRE

    Fábio Ângelo Bonassi

    2014-01-01

    Este estudo tem por objetivos analisar as variáveis do Ambiente Organizacional Externo, à luz das Teorias da Organização Industrial e da Visão Baseada em Recursos, reconhecidas pelo dirigente como adequadas à administração estratégica da pequena empresa. As relações das Pequenas Empresas com o Ambiente Organizacional Externo (EOE) é menos investigada proporcionalmente do que os aspectos do dirigente e da estrutura dessas empresas. Não são encontrados portanto estudos sobre pequenas empresas i...

  10. Mortalidade por câncer em trabalhadores da indústria da borracha de São Paulo Cancer mortality among rubber industry workers in São Paulo, Brazil

    Directory of Open Access Journals (Sweden)

    Hélio Neves

    2006-04-01

    Full Text Available OBJETIVO: Avaliar as mortes por câncer em trabalhadores da indústria da borracha de acordo com o tamanho da empresa. MÉTODOS: Coorte histórica com 9.188 trabalhadores masculinos, matriculados em sindicato de trabalhadores da indústria de borracha do Estado de São Paulo entre 1975 e 1985, sobreviventes em janeiro de 1990 e acompanhados até o final de 2000. As mortes por câncer foram comparadas internamente à coorte, cujos membros foram subdivididos em estratos por porte e sub-ramo da empresa, setor de trabalho e qualificação profissional. A abordagem por conjuntos de risco e regressão logística condicional foi utilizada para o cálculo dos riscos relativos, ajustados por idade, tempo desde o primeiro emprego e tempo de trabalho na indústria da borracha. RESULTADOS: Quando comparados aos empregados de grandes empresas, trabalhadores de pequenas empresas mostraram excesso de mortes por todos tipos de câncer (RR=2,33; IC 95%: 0,90-6,03; tumores de estômago (RR=3,47; IC 95%: 2,57-4,67 e do trato aero-digestivo superior (RR=2,49; IC 95%: 1,78-3,48. Identificou-se excesso de mortes por câncer nos trabalhadores dos setores de manutenção (RR=2,23; IC 95%: 0,73-6,76; expedição, armazenamento e transporte (RR=2,97; IC 95%: 0,77-11,38; e produção (RR=3,51; IC 95%: 1,07-11,57, comparados aos trabalhadores dos setores administrativos. CONCLUSÕES: Os resultados mostram evidências de aumento do risco de tumores de estômago e do trato aero-digestivo superior e, possivelmente, por câncer em geral em trabalhadores de empresas de pequeno porte da indústria da borracha quando comparados aos trabalhadores das grandes empresas.OBJECTIVE: To investigate cancer deaths among rubber industry workers according to company size. METHODS: This historical cohort study included 9,188 male workers, engaged as members of a workers' union in São Paulo, Southeastern Brazil, between 1975 and 1985, alive in January 1990 and followed until the end of 2000

  11. INFLUÊNCIA ESTOICA NA CONCEPÇÃO DE <em>STATUS> E <em>DICTUM> COMO <em> QUASI RES EM> (ὡσανεì τινά EM ABERLARDO STOIC INFLUENCE IN ABELARD'S CONCEPTION OF <em>STATUS> AND <em>DICTUM> AS <em>QUASI RESem> (ὡσανεì τινά.

    Directory of Open Access Journals (Sweden)

    Guy Hamelin

    2011-09-01

    Full Text Available Na sua obra, Pedro Abelardo (1079-1142 destaca duas noções metafísicas que fundamentam sua teoria lógica: o <em style="mso-bidi-font-style: normal;">statusem> e o <em style="mso-bidi-font-style: normal;">dictum propositionisem>, ao causar, respectivamente, a imposição (<em style="mso-bidi-font-style: normal;">impositioem> dos termos universais e o valor de verdade das proposições. Trata-se de expressões que se referem a naturezas ontológicas peculiares, na medida em que não são consideradas coisas (<em style="mso-bidi-font-style: normal;">resem>, mesmo que constituem causas. Todavia, também não são nada. Abelardo as chama de ‘quase coisas’ (<em style="mso-bidi-font-style: normal;">quasi resem>. No presente artigo, explicamos, primeiro, essas duas noções essenciais da lógica abelardiana, antes de tentar, em seguida, encontrar a fonte dessa metafísica particular. Em oposição a comentadores importantes da lógica de Abelardo, que estimam que haja uma forte influência platônica sobre essa concepção específica, defendemos antes, com apoio de textos significativos e de acordo com o nominalismo abelardiano, que a maior ascendência sobre a metafísica do nosso autor é a do estoicismo, sobretudo, antigo.In his work, Peter Abelard (1079-1142 highlights two metaphysical notions, which sustain his logical theory: the <em>status> and the <em>dictum propositionisem>, causing respectively both the imposition (<em>impositio> of universal terms and the thuth-value of propositions. Both expressions refer to peculiar ontological natures, in so far as they are not considered things (<em>res>, even if they constitute causes. Nevertheless, neither are they ‘nothing’. Abelard calls them ‘quasi-things’ (<em>quasi resem>. In the present article, we expound first these two essential notions of Abelardian logic before then trying to find the source of this particular metaphysics. Contrary to some important

  12. Videovigilância inteligente em ambientes aquáticos : detecção precoce de afogamento em piscinas domésticas

    OpenAIRE

    Peixoto, Nuno Pedro Rodrigues

    2010-01-01

    Tese de doutoramento (área de Informática Industrial) Neste documento, apresenta-se um conjunto de trabalhos relativos à utilização de videovigilância inteligente para a análise de comportamentos humanos em ambientes aquáticos, orientado à detecção precoce de afogamento em piscinas domésticas. Recorrendo a imagens de vídeo capturadas com uma câmara comum de videovigilância e um computador pessoal para efectuar todas as análises necessárias ao reconhecimento de pessoas e à infer...

  13. Industrial democracy in South Africa's transition

    African Journals Online (AJOL)

    In comparison with traditional work practices, thus, increased flexibility in production .... the quality of working life but also the product, and productivity, of labour. The ways in which ... of change. There are other advantages also; for example, drawing on em- ...... INDUSTRIAL DEMOCRACY: A BALANCE SHEET. The most ...

  14. Modelo Hackefors para obtenção de certificado ambiental ISO-14.001 em pequenas e médias empresas: uma discussão sobre sua aplicação em empresas brasileiras

    Directory of Open Access Journals (Sweden)

    José Jorge Abdalla

    Full Text Available Baseado em estudo feito no Distrito Industrial Fazenda Botafogo, no município do Rio de Janeiro, este artigo analisa a possibilidade de aplicação conjunta em distritos industriais brasileiros de um modelo de sistema de gestão ambiental (SGA, o modelo Hackefors, criado para facilitar a obtenção da certificação ambiental ISO 14.001 por empresas de pequeno e médio porte de distritos industriais na Suécia. O modelo Hackefors, surgido em 1997 no distrito sueco que lhe deu o nome, foi adotado por 450 empresas de 24 distritos industriais daquele país, basicamente, por ter possibilitado a certificação ambiental a cada empresa que a ele aderiu, com ganhos individuais e coletivos para as mesmas. Para a elaboração deste artigo, foi analisada a literatura sobre distritos industriais e sistemas de gestão ambiental e, também, consultados documentos relativos ao modelo Hackefors e ao Distrito Industrial Fazenda Botafogo. Além disso, foram entrevistados consultores que trabalharam na implantação do referido modelo, representantes das empresas do distrito industrial carioca e especialistas em certificação ISO 14.001. Esse esforço permitiu comparar as duas situações e fazer algumas considerações sobre a aplicação do modelo sueco em Fazenda Botafogo. O resultado mostra que as diferenças entre as situações iniciais de atuação ambiental nos dois distritos não são um empecilho à construção de redes. Revela ainda que as semelhanças existentes sugerem que a aplicação do modelo Hackefors no distrito industrial do Rio de Janeiro poderia ser bem-sucedida. Por outro lado, em Fazenda Botafogo não foi identificado nenhum fator que transformasse a busca individual por um sistema de gestão ambiental nos moldes da ISO 14.001 numa busca coletiva, como ocorreu nos distritos industriais suecos.

  15. Growth kinetics of boride layers formed on 99.0% purity nickel

    Indian Academy of Sciences (India)

    abrasion wear, corrosion and high oxidation resistance com- pared with other ... Ni and Ni-base alloys are used in various industrial plants and equipment for their high ... with 1000-grit emery paper before the boronizing process. The boriding ...

  16. Effects of grit roughness and pitch oscillations on the NACA 4415 airfoil

    Energy Technology Data Exchange (ETDEWEB)

    Hoffmann, M.J.; Reuss Ramsay, R.; Gregorek, G.M. [Ohio State Univ., Columbus, OH (United States)

    1996-07-01

    A NACA 4415 airfoil model was tested in The Ohio State University Aeronautical and Astronautical Research Laboratory 3 x 5 subsonic wind tunnel under steady state and unsteady conditions. The test defined baseline conditions for steady state angles of attack from {minus}10{degree} to +40{degree} and examined unsteady behavior by oscillating the model about its pitch axis for three mean angles, three frequencies, and two amplitudes. For all cases, Reynolds numbers of 0.75, 1, 1.25, and 1.5 million were used. In addition, these were repeated after the application of leading edge grit roughness (LEGR) to determine contamination effects on the airfoil performance. Steady state results of the NACA 4415 testing at Reynolds number of 1.25 million showed a baseline maximum lift coefficient of 1.30 at 12.3{degree} angle of attack. The application of LEGR reduced the maximum lift coefficient by 20% and increased the 0.0090 minimum drag coefficient value by 62%. The zero lift pitching moment of {minus}0.0967 showed a 13% reduction in magnitude to {minus}0.0842 with LEGR applied. Data were also obtained for two pitch oscillation amplitudes: {+-}5.5{degree} and {+-}10{degree}. The larger amplitude consistently gave a higher maximum lift coefficient than the smaller amplitude, and both unsteady maximum lift coefficients were greater than the steady state values. Stall is delayed on the airfoil while the angle of attack is increasing, thereby causing an increase in maximum lift coefficient. A hysteresis behavior was exhibited for all the unsteady test cases. The hysteresis loops were larger for the higher reduced frequencies and for the larger amplitude oscillations. As in the steady case, the effect of LEGR in the unsteady case was to reduce the lift coefficient at high angles of attack. In addition, with LEGR, the hysteresis behavior persisted into lower angles of attack than for the clean case.

  17. Effects of grit roughness and pitch oscillations on the S810 airfoil

    Energy Technology Data Exchange (ETDEWEB)

    Ramsay, R.R.; Hoffman, M.J.; Gregorek, G.M. [Ohio State Univ., Columbus, OH (United States)

    1996-01-01

    An S810 airfoil model was tested in The Ohio State University Aeronautical and Astronautical Research Laboratory 3 x 5 subsonic wind tunnel under steady state and unsteady conditions. The test defined baseline conditions for steady state angles of attack from -20{degrees} to +40{degrees} and examined unsteady behavior by oscillating the model about its pitch axis for three mean angles, three frequencies, and two amplitudes. For all cases, Reynolds numbers of 0.75, 1, 1.25, and 1.5 million were used. In addition, the above conditions were repeated after the application of leading edge grit roughness (LEGR) to determine contamination effects on the airfoil performance. Baseline steady state results of the S810 testing showed a maximum lift coefficient of 1.15 at 15.2{degrees}angle of attack. The application of LEGR reduced the maximum lift coefficient by 12% and increased the 0.0085 minimum drag coefficient value by 88%. The zero lift pitching moment of -0.0286 showed a 16% reduction in magnitude to -0.0241 with LEGR applied. Data were also obtained for two pitch oscillation amplitudes: {plus_minus}5.5{degrees} and {plus_minus}10{degrees}. The larger amplitude consistently gave a higher maximum lift coefficient than the smaller amplitude and both sets of unsteady maximum lift coefficients were greater than the steady state values. Stall was delayed on the airfoil while the angle of attack was increasing, thereby causing an increase in maximum lift coefficient. A hysteresis behavior was exhibited for all the unsteady test cases. The hysteresis loops were larger for the higher reduced frequencies and for the larger amplitude oscillations. In addition to the hysteresis behavior, an unusual feature of these data were a sudden increase in the lift coefficient where the onset of stall was expected. As in the steady case, the effect of LEGR in the unsteady case was to reduce the lift coefficient at high angles of attack.

  18. Natural Products from Antarctic Colonial Ascidians of the Genera <em>Aplidium> and <em>Synoicum>: Variability and Defensive Role

    Directory of Open Access Journals (Sweden)

    Conxita Avila

    2012-08-01

    Full Text Available Ascidians have developed multiple defensive strategies mostly related to physical, nutritional or chemical properties of the tunic. One of such is chemical defense based on secondary metabolites. We analyzed a series of colonial Antarctic ascidians from deep-water collections belonging to the genera <em>Aplidium> and <em>Synoicum> to evaluate the incidence of organic deterrents and their variability. The ether fractions from 15 samples including specimens of the species <em>A.> <em>falklandicum>, <em>A.> <em>fuegiense>, <em>A.> <em>meridianum>, <em>A.> <em>millari> and <em>S.> <em>adareanum> were subjected to feeding assays towards two relevant sympatric predators: the starfish <em>Odontaster> <em>validus>, and the amphipod <em>Cheirimedon> <em>femoratus>. All samples revealed repellency. Nonetheless, some colonies concentrated defensive chemicals in internal body-regions rather than in the tunic. Four ascidian-derived meroterpenoids, rossinones B and the three derivatives 2,3-epoxy-rossinone B, 3-epi-rossinone B, 5,6-epoxy-rossinone B, and the indole alkaloids meridianins A–G, along with other minoritary meridianin compounds were isolated from several samples. Some purified metabolites were tested in feeding assays exhibiting potent unpalatabilities, thus revealing their role in predation avoidance. Ascidian extracts and purified compound-fractions were further assessed in antibacterial tests against a marine Antarctic bacterium. Only the meridianins showed inhibition activity, demonstrating a multifunctional defensive role. According to their occurrence in nature and within our colonial specimens, the possible origin of both types of metabolites is discussed.

  19. Characterization of solid wastes from kraft pulp industry for ceramic materials development purposes; Caracterizacao de residuos solidos da industria de celulose tipo kraft visando sua aplicacao no desenvolvimento de materiais ceramicos

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigues, L.R.; Francisco, M.A.C.O.; Sagrillo, V.P.D.; Louzada, D.M.; Entringer, J.M.S. [Instituto Federal do Espirito Santo (IFES), Vitoria, ES (Brazil)

    2016-07-01

    The Kraft pulp industry generates a large amount of solid wastes. Due this large quantity, the target of this study is characterize inorganic solid wastes, dregs, grits and lime mud, from the step of reagents recovery of Kraft process, aiming evaluate the potentiality of their use as alternative raw material on development of ceramic materials. Initially, the wastes were dried and ground, then they were subjected to the following characterization techniques: pH analysis, particle size analysis, X ray fluorescence, X ray diffraction, differential thermal analysis and thermogravimetric analysis and scanning electron microscopy. According to the results, it may be concluded that these wastes could be used as raw material in production of red ceramic and luting materials. (author)

  20. Alinhamento e maturidade na gerência de TI em segmento tradicional da indústria: o setor sucroalcooleiro / Alignment and maturity in IT management in industry traditional segment: the sugarcane industry

    Directory of Open Access Journals (Sweden)

    João Paulo de Medeiros Neto

    2013-05-01

    Full Text Available O objetivo do estudo foi analisar o setor sucroalcooleiro da Região Nordeste com a intenção de identificar variáveis que descrevam o processo de alinhamento, se houver, entre estratégias de negócio e estratégias de TI. Buscou-se suprir uma lacuna existente na Literatura, onde a maioria das investigações sobre alinhamento no país tem privilegiado ramos mais dinâmicos, com especial ênfase ao segmento bancário, onde a relação entre investimentos em TI e produtividade é mais evidente. A pesquisa está fundamentada em trabalhos recentes sobre avaliação dos benefícios do desenvolvimento tecnológico, como os recursos aplicados em TIC, que proporcionam suporte às empresas conferindo-lhes (ou não competitividade (paradoxo da produtividade. Para isso, foi aplicado um questionário, além de realizadas entrevistas, para aprofundamento de alguns pontos, junto aos gerentes de áreas estratégicas em 14 usinas do setor sucroalcooleiro em Pernambuco (total de 19, referenciadas pelo modelo de alinhamento de Henderson e Venkatraman (1993, referendado por Albertin (2009 e, também, pela análise da maturidade desse alinhamento, definida por Luftman (2000. O alinhamento estratégico ficou caracterizado com um grupo identificado como moderno, que pratica a utilização da TI com maior intensidade, e um grupo mais tradicional, que se preocupa com a TI, porém de maneira menos ativa. No processo de alinhamento, ficou evidenciada a importância de uma equipe de gerentes proficiente que seesmera em dialogar, buscando soluções de TI em sintonia com as estratégias de negócio da firma. Como extensão do estudo, é sugerida uma pesquisa que inclua o mercado sucroalcooleiro nacional ao universo de investigação.The aim of this study was to analyze the sugarcane industry of the northeast with the intention of identifying variables that describe the alignment process, if any, between business strategies and IT strategies. It sought to fill a gap in

  1. The use of coal mining wastes for manufacturing paving materials; Los esteriles del carbon como materia prima para la fabricacion de materiales para pavimentacion

    Energy Technology Data Exchange (ETDEWEB)

    1999-09-01

    This project was aimed at proving the technical feasibility of the use of coal mining wastes in the manufacturing of paving materials; floor-tiles, flags, paving-stones, grit stones, etc.. With that aim, four types of coal mining wastes were selected out of an inventory and several tests were conducted and following the results, the most appropriate coal mining wastes, the acceptance limits and the quality control tests to be applied to the materials obtained from coal mining wastes as starting materials for the manufacturing of paving materials were established. Different laboratory test were conducted on the manufacturing of flags, floor-tiles and paving-stones. In addition, semi-industrial scale tests were carried out on the manufacturing of grit stones. Preliminary manufactory designs were elaborated for both material types. The study proved that coal mining wastes in a mixture with other raw materials can be used in the manufacturing of paving materials: floor-tiles, flags, paving-stones, grit stones. (Author)

  2. Fumigant Antifungal Activity of Myrtaceae Essential Oils and Constituents from <em>Leptospermum petersoniiem> against Three <em>Aspergillus> Species

    Directory of Open Access Journals (Sweden)

    Il-Kwon Park

    2012-09-01

    Full Text Available Commercial plant essential oils obtained from 11 Myrtaceae plant species were tested for their fumigant antifungal activity against <em>Aspergillus ochraceusem>, <em>A. flavusem>, and <em>A. nigerem>. Essential oils extracted from<em> em>Leptospermum> <em>petersonii> at air concentrations of 56 × 10−3 mg/mL and 28 × 10−3 mg/mL completely inhibited the growth of the three <em>Aspergillus> species. However, at an air concentration of 14 × 10−3 mg/mL, inhibition rates of <em>L. petersoniiem> essential oils were reduced to 20.2% and 18.8% in the case of <em>A. flavusem> and <em>A. nigerem>, respectively. The other Myrtaceae essential oils (56 × 10−3 mg/mL only weakly inhibited the fungi or had no detectable affect. Gas chromatography-mass spectrometry analysis identified 16 compounds in <em>L. petersoniiem>> em>essential> em>oil.> em>The antifungal activity of the identified compounds was tested individually by using standard or synthesized compounds. Of these, neral and geranial inhibited growth by 100%, at an air concentration of 56 × 10−3 mg/mL, whereas the activity of citronellol was somewhat lover (80%. The other compounds exhibited only moderate or weak antifungal activity. The antifungal activities of blends of constituents identified in <em>L. petersoniiem> oil indicated that neral and geranial were the major contributors to the fumigant and antifungal activities.

  3. Fatores determinantes no processo de decisão de investimentos em robotização na indústria Brasileira de autopeças Main factors on robotics investments decision in the Brazilian autoparts industry

    Directory of Open Access Journals (Sweden)

    Rene Meira Medina

    2010-01-01

    Full Text Available A desverticalização do processo produtivo na indústria automobilística implicou na migração de parte da produção de sistemas e subsistemas dos veículos para a indústria de autopeças. Essa migração trouxe inovações no desenvolvimento de produtos e processos e novos padrões de qualidade. Dentre as inovações de processo destaca-se a robotização industrial, que conquista espaço crescente nas linhas de produção sob o argumento corrente relacionado aos ganhos de qualidade, além de vantagens ergonômicas, mas que demanda investimentos relativamente altos. Sendo esse um setor com baixa atratividade sob a ótica da rentabilidade e do retorno do capital, as decisões de investimentos em robotização revestem-se de importância relativamente elevada porque, além de impactarem significativamente os resultados financeiros, são decisões de natureza estratégica que influenciam a competitividade das empresas. Dado este contexto, esta pesquisa foi realizada com o objetivo de analisar quais são os fatores mais importantes no processo de decisão de investimento em robotização industrial nas empresas de autopeças brasileiras. Com base em entrevistas com especialistas dos fabricantes de robôs e de autopeças e em uma análise fatorial exploratória realizada com empresas de autopeças, concluiu-se que os aspectos financeiros relacionados a custos e retorno a longo prazo são os fatores de maior importância. Aspectos como tecnologia, qualidade e produtividade associadas à robotização têm uma importância secundária e, neste sentido e em relação a esta decisão, a estratégia de manufatura nas empresas de autopeças amostradas pode ser considerada subordinada à estratégia financeira, devendo a ela estar alinhada.The deverticalization of the production process in the automotive industry has resulted in a migration of part of the production of vehicles systems and subsystems to the autoparts industry. Such migration has

  4. Situação das indústrias madeireiras do Estado do Amazonas em 2000 Lumber industries situation in 2000 in Amazonas State

    Directory of Open Access Journals (Sweden)

    José Ricardo Araújo Lima

    2005-06-01

    Full Text Available Apesar da baixa atividade de usos do solo no Estado, a produção de madeira não é sustentável. Isso é causado, principalmente, pela falta de infra-estrutura dos órgãos responsáveis para monitorar os planos de manejo florestal e de corte raso para agricultura e pecuária. Este estudo apresenta análise de alguns fatores de produção, industrialização e comercialização da indústria madeireira do Estado do Amazonas, visando viabilizar diagnóstico do setor florestal. Essas informações possibilitam o estabelecimento de políticas florestais para a região. Fez-se a definição das zonas de produção, onde os principais municípios produtores de serrados foram Manaus, Itacoatiara, Manacapuru e Parintins; e de compensados e laminados foram Manaus e Itacoatiara. Após essa definição os dados foram coletados diretamente nas indústrias, através de questionários e entrevistas para coletar as seguintes informações: principais espécies consumidas, produtividade das indústrias, origem da matéria-prima, transporte, qualificação de pessoal e treinamento, principais problemas tecnológicos e exportação. Em 2000, a produção estadual foi de 323.400m³ de madeira em toras. Mais de 50 espécies diferentes são usadas nas serrarias, das quais 16 representaram 80% do volume total, sendo as 5 espécies (louro inhamui,angelim pedra,amapá,assacu e maçaranduba contribuíram com 49,34% do consumo total; quanto as indústrias de compensado e laminado estas usaram, 17 espécies onde as 5 principais (muiratinga, sumaúma, copaíba, assacu e amapá representaram 62,71% do consumo total.Também foram coletados dados complementares junto ao IBAMA, SUFRAMA, SEFAZ e IBGE.Despite low land activities, hardwood production is not sustainable. This is caused mainly by the lack of infrastructure on the part of the responsible organs that monitor forest management plans and clear cutting for pasture and agriculture. This study dealt with forest

  5. Clinical Relevance of <em>CDH1em> and <em>CDH13em> DNA-Methylation in Serum of Cervical Cancer Patients

    Directory of Open Access Journals (Sweden)

    Günther K. Bonn

    2012-07-01

    Full Text Available This study was designed to investigate the DNA-methylation status of <em>E>-cadherin (<em>CDH1em> and <em>H>-cadherin (<em>CDH13em> in serum samples of cervical cancer patients and control patients with no malignant diseases and to evaluate the clinical utility of these markers. DNA-methylation status of <em>CDH1em> and <em>CDH13em> was analyzed by means of MethyLight-technology in serum samples from 49 cervical cancer patients and 40 patients with diseases other than cancer. To compare this methylation analysis with another technique, we analyzed the samples with a denaturing high performance liquid chromatography (DHPLC PCR-method. The specificity and sensitivity of <em>CDH1em> DNA-methylation measured by MethyLight was 75% and 55%, and for <em>CDH13em> DNA-methylation 95% and 10%. We identified a specificity of 92.5% and a sensitivity of only 27% for the <em>CDH1em> DHPLC-PCR analysis. Multivariate analysis showed that serum <em>CDH1em> methylation-positive patients had a 7.8-fold risk for death (95% CI: 2.2–27.7; <em>p> = 0.001 and a 92.8-fold risk for relapse (95% CI: 3.9–2207.1; <em>p> = 0.005. We concluded that the serological detection of <em>CDH1em> and <em>CDH13em> DNA-hypermethylation is not an ideal diagnostic tool due to low diagnostic specificity and sensitivity. However, it was validated that <em>CDH1em> methylation analysis in serum samples may be of potential use as a prognostic marker for cervical cancer patients.

  6. Environmental Management Systems (EMS Adoption in Sarawak (Malaysia: Implementation Motivations

    Directory of Open Access Journals (Sweden)

    Lee Lee Ho

    2017-09-01

    Full Text Available Environmental management has been in the process of evolution since Industrial Revolutions of 18th and 19th centuries. And the more recent is the development of international environmental management standards and guidelines to facilitate global trade. These environmental management standards and guidelines are usually known as Environmental Management Systems (EMS. This research investigates the implementation motivations in relation to EMS adoption in Sarawak, Malaysia organizations. Empirical findings of a survey on the above in Sarawak organizations are presented. About 112 survey questionnaires invitations were forwarded to various organizations in Sarawak and a total of 47 responses were received. The results of this research show that among the Sarawak organizations, the top three implementation motivations or benefits from implementing EMS according to their importance by the Sarawak EMS user’s organizations are 1 Legal compliance as the top benefit of EMS implementation; 2 Improvement in operational environmental protection; and 3 Corporate image advantages.

  7. Extraction of Dihydroquercetin<em> em>from <em>Larix gmeliniem>i> em>with Ultrasound-Assisted and Microwave-Assisted Alternant Digestion

    Directory of Open Access Journals (Sweden)

    Yuangang Zu

    2012-07-01

    Full Text Available An ultrasound and microwave assisted alternant extraction method (UMAE was applied for extracting dihydroquercetin (DHQ from <em>Larix gmeliniem>i> wood. This investigation was conducted using 60% ethanol as solvent, 1:12 solid to liquid ratio, and 3 h soaking time. The optimum treatment time was ultrasound 40 min, microwave 20 min, respectively, and the extraction was performed once. Under the optimized conditions, satisfactory extraction yield of the target analyte was obtained. Relative to ultrasound-assisted or microwave-assisted method, the proposed approach provides higher extraction yield. The effect of DHQ of different concentrations and synthetic antioxidants on oxidative stability in soy bean oil stored for 20 days at different temperatures (25 °C and 60 °C was compared. DHQ was more effective in restraining soy bean oil oxidation, and a dose-response relationship was observed. The antioxidant activity of DHQ was a little stronger than that of BHA and BHT. Soy bean oil supplemented with 0.08 mg/g DHQ exhibited favorable antioxidant effects and is preferable for effectively avoiding oxidation. The <em>L. gmeliniiem> wood samples before and after extraction were characterized by scanning electron microscopy. The results showed that the UMAE method is a simple and efficient technique for sample preparation.

  8. Inteligência Artificial: uma aplicação em uma indústria de processo contínuo Artificial Intelligence: an application in a continuous process industry

    Directory of Open Access Journals (Sweden)

    Miguel Afonso Sellitto

    2002-12-01

    Full Text Available Este trabalho descreve uma aplicação da lógica fuzzy de controle e do CBR (Raciocínio Baseado em Casos na indústria de processo contínuo. Essas técnicas são discutidas dentro do campo de conhecimentos da Inteligência Artificial, associadas ao processo de tomada de decisões empresariais. A Inteligência Artificial é apontada como um campo de conhecimentos que pode apoiar a tomada de decisões de um modo mais simples e mais preciso do que outros métodos, tais como a modelagem e a gestão por indicadores. As etapas para a construção de um sistema especialista, construído principalmente a partir de experiências empíricas humanas, também são discutidas. O trabalho se encerra apresentando uma rotina de tomada de decisão em um processo termoquímico na indústria cimenteira conduzida por um sistema especialista baseado em CBR e lógica fuzzy, e uma discussão sobre resultados comparados com operadores humanos nas mesmas condições.This paper describes an application of the fuzzy logic control and CBR in the continuous process industry. The techniques are discussed inside the larger branch of knowledge called Artificial Intelligence (AI, which can be related with the decision-making process in companies. Artificial Intelligence is pinpointed as a science that can support decisions in an easier and more precisely way than others methods as models and process indicators management. The steps for the erection of an Expert System, built mainly from human empirical experiences, are also discussed. The paper comes to an end by presenting a decision-making routine in a thermochemical process, in the cement industry, as performed by an Expert System decision-maker, based in CBR and fuzzy logic, and leading to a discussion about results and performance gains, in comparison with human-guided action in the same process.

  9. Uma abordagem baseada em procura directa direccional a problemas com ruído

    OpenAIRE

    Marcos, Samuel Pacheco Marques Vaz

    2016-01-01

    Em aplicações a nível industrial, principalmente em engenharia, é frequente ser-se confrontado com problemas de optimização desafiadores onde, em particular, a avaliação da função objectivo pode estar contaminada com ruído numérico. A presença deste ruído inviabiliza a utilização de métodos de optimização baseados em derivadas. A procura directa direccional (PDD) é um dos métodos que não recorre a derivadas. Nesta dissertação procurou-se avaliar o seu desempenho numérico na opt...

  10. How <em>Varroa> Parasitism Affects the Immunological and Nutritional Status of the Honey Bee, <em>Apis melliferaem>

    Directory of Open Access Journals (Sweden)

    Katherine A. Aronstein

    2012-06-01

    Full Text Available We investigated the effect of the parasitic mite <em>Varroa destructorem> on the immunological and nutritional condition of honey bees, <em>Apis melliferaem>, from the perspective of the individual bee and the colony. Pupae, newly-emerged adults and foraging adults were sampled from honey bee colonies at one site in S. Texas, USA. <em>Varroa>‑infested bees displayed elevated titer of Deformed Wing Virus (DWV, suggestive of depressed capacity to limit viral replication. Expression of genes coding three anti-microbial peptides (<em>defensin1, abaecin, hymenoptaecinem> was either not significantly different between <em>Varroa>-infested and uninfested bees or was significantly elevated in <em>Varroa>-infested bees, varying with sampling date and bee developmental age. The effect of <em>Varroa> on nutritional indices of the bees was complex, with protein, triglyceride, glycogen and sugar levels strongly influenced by life-stage of the bee and individual colony. Protein content was depressed and free amino acid content elevated in <em>Varroa>-infested pupae, suggesting that protein synthesis, and consequently growth, may be limited in these insects. No simple relationship between the values of nutritional and immune-related indices was observed, and colony-scale effects were indicated by the reduced weight of pupae in colonies with high <em>Varroa> abundance, irrespective of whether the individual pupa bore <em>Varroa>.

  11. Implementação de um sistema de custos baseado em atividades em um ambiente industrial

    OpenAIRE

    Gino Berninzon Di Domenico

    1994-01-01

    Resumo: Este trabalho descreve inicialmente, as principais características, a estrutura e as limitações dos sistemas de custeio tradicionais. Nesta etapa detalha-se os Sistemas de Custeio Total, apresentando os modelos dos Sistemas de Custeio por Taxa e do Sistema de Custeio por Absorção. Posteriormente, são introduzi das e detalhadas as características básicas e a estrutura de uma nova abordagem para a área de custos, a do Custeio -Baseado em Atividades (Activity Based Costing). É desenvolv...

  12. Physical and sensory characteristics of pellets elaborated with different levels of corn grits and whey protein concentrate

    Directory of Open Access Journals (Sweden)

    Anderson Felicori Fernandes

    2016-04-01

    Full Text Available ABSTRACT Whey has proteins of high biological value, which has been used as an ingredient in the elaboration of yogurt, milk beverages and as protein concentrates. Food extrusion stands out as one of the most efficient cooking techniques, allowing a number of product types, from soluble flour to convenience products, such as snacks, which have high acceptability by the consumers. Products processed by extrusion, such as those expanded by frying (pellets, have high carbohydrate content, and its enrichment with protein can favor its nutritional aspect. This study aimed to use the whey protein concentrate (WPC in combination with corn grits in the preparation of pellets. Absolute density, density of expanded pellets, color, crispness index, and pellet sensory acceptance were determined. For the absolute density, contents from 5% to 17% produced denser non-expanded pellets. The higher the WPC content and the temperature of the extruder, the higher the density of the expanded pellets. The crispness index was not altered by the protein content and by the extruder temperature. In the sensory analysis, the preferred samples were the ones with lower WPC levels (5%. We concluded that higher WPC values in the pellets formulation increased their density, but did not alter color and texture, as well as small WPC levels did not affect the acceptance of snacks.

  13. Trophic systems and chorology: data from shrews, moles and voles of Italy preyed by the barn owl / Sistemi trofici e corologia: dati su <em>Soricidae>, <em>Talpidae> ed <em>Arvicolidae> d'Italia predati da <em>Tyto albaem> (Scopoli 1769

    Directory of Open Access Journals (Sweden)

    Longino Contoli

    1986-12-01

    Full Text Available Abstract In small Mammals biogeography, available data are up to now by far too scanty for elucidate the distribution of a lot of taxa, especially with regard to the absence from a given area. In this respect, standardized quantitative sampling techniques, like Owl pellets analysis can enable not only to enhance faunistic knowledges, but also to estimate the actual absence probability of a given taxon "m", lacking from the diet of an individual raptor. For the last purpose, the relevant frequencies of "m" in the other ecologically similar sites of the same raptor species diets are averaged ($f_m$ : the relevant standard error (multiplicated by a coefficient, according to the desired degree of accuracy, in relation of the integral of probabilities subtracted ($overline{F}_m - a E$: then, the probability that a single specimen is not pertaining to "m" is obtained ($P_0 = 1 - F_m + a E$; lastly, the desiderate accuracy probability ($P_d$ is chosen. Now, "$N_d$" (the number of individuals of all prey species in a single site needed for obtain, with the desired probability, a specimen at least of "m" is obtained through $$N = frac{ln P_d}{ln P_0}$$ Obviously, every site-diet with more than "N" preyed individuals and without any "i" specimen is considered to be lacking of such taxon. A "usefulness index" for the above purposes is outlined and checked about three raptors. Some exanples about usefulness of the Owl pellet analysis method in biogeography are given, concerning <em>Tyto albaem> diets in peninsular Italy about: - <em>Sorex minutusem>, lacking in some quite insulated areas; - <em>Sorex araneusem> (sensu stricto, after GRAF et al., 1979, present also in lowland areas in Emilia-Romagna; - <em>Crocidura suaveolensem> and - <em>Suncus etruscusem>, present also in the southermost part of Calabria (Reggio province; - <em>Talpa caecaem>, present also in the Antiapennines of Latium (Cimini mounts; - <em>Talpa romanaem

  14. Caracterização e tratabilidade biológica dos efluentes líquidos gerados em cabines de pintura de uma indústria moveleira Characterization and treatability of wastewater from a dying hood of a furniture industry

    Directory of Open Access Journals (Sweden)

    Anselmo R. Lage Santos

    2010-12-01

    Full Text Available O objetivo deste trabalho foi caracterizar os efluentes gerados em cabines de pintura de uma indústria moveleira e avaliar a eficiência de sistemas biológicos (anaeróbio e aeróbio para o seu tratamento. O efluente industrial apresentou elevado teor de matéria orgânica (DQO total de 634 a 2.790 mg.L-1; DBO5 total de 360 a 972 mg.L-1 e baixos teores de macronutrientes (NTK de 1,9 mg.L-1 e Ptotal de 0,5 mg.L- e metais tóxicos. Os ensaios de tratabilidade em reator UASB (~25ºC e tempo de detenção hidráulica - TDH = 10 horas, indicaram uma eficiência máxima de remoção de matéria orgânica de 90% na composição volumétrica 70:30 (efluente industrial:esgoto sanitário. A alimentação do reator UASB só com efluente industrial resultou em acúmulo de ácidos graxos voláteis e inibição microbiana, mas o uso de pós-tratamento aeróbio (TDH = 96h garantiu elevada eficiência global (~88% de remoção de matéria orgânica.The main objective of this work was to characterize the wastewater from the dying hood of a woven furniture industry, and to assess the efficiency of biological processes (anaerobic and aerobic for its treatment. The physical-chemical characterization of the industrial wastewater showed a high organic matter content (total COD from 634 to 2,790 mg.L-1; total BOD5 from 360 to 972 mg.L-1, low content of macronutrients (NTK of 1.9 mg.L-1 and P of 0.5 mg.L-1 and toxic metals. The anaerobic degradation tests in a bench-scale UASB reactor (25ºC and hydraulic retention time - HRT = 10 hours showed that a maximum removal efficiency of 90% was obtained when the reactor was fed with 30% raw sewage and 70% industrial wastewater. The feeding of UASB reactor with only industrial wastewater resulted in volatile fatty acids accumulation and microbial inhibition; however, the use of aerobic post-treatment (HRT = 96 hours granted a high (~88% organic matter removal efficiency.

  15. Industry and the environment - voluntary initiatives

    International Nuclear Information System (INIS)

    Olsen, K.; Guldborg, S.

    1997-01-01

    For some time industry in general has sought to take visible initiatives which demonstrate its sense of responsibility in respect of the environment. A main motivation is to ensure a business based approach, to establish a partnership with policy makers, which will reduce the necessity of command and control measures. In 1989 the European Commission invited Eurogas and other energy industries to develop Codes of Conduct in relation to the environment, based on specific guiding principles. The natural gas industry continues to seek ways to build on the advantages of its product and to aim for all-round improvement with regard to environmental policies. The potential and importance of the Environmental Management Systems (EMSs) is increasingly developed by companies within Europe and internationally. The key elements of the proposed EMS system for the gas industry are presented in detail. (R.P.)

  16. Prevalência de fatores de risco cardiovascular em trabalhadores de uma indústria brasileira Prevalencia de factores de riesgo cardiovascular en trabajadores de una industria brasileña Prevalence of cardiovascular risk factors in a population of Brazilian industry workers

    Directory of Open Access Journals (Sweden)

    Roberta Soares Lara Cassani

    2009-01-01

    Full Text Available FUNDAMENTO: Determinar os fatores de risco cardiovascular é essencial para a prevenção primária e secundária das doenças do aparelho circulatório. OBJETIVO: Obter a prevalência de fatores de risco cardiovascular em uma população de industriários no Brasil. MÉTODOS: Estudo transversal em uma coorte com entrevista sociodemográfica para identificação de fatores de risco cardiovascular, medidas antropométricas e de pressão arterial e coleta de sangue capilar para dosagem de glicose, colesterol e triglicérides em funcionários de ambos os sexos de indústria alimentícia. RESULTADOS: Avaliaram-se 1.047 funcionários, sendo 913 (87% do sexo masculino, com idade média de 36 ± 8 anos. A freqüência de sedentarismo foi de 83% e de sobrepeso de 63%. Hipertensão arterial foi identificada em 28% dos indivíduos e 45% estavam na faixa de pré-hipertensão. Alteração de glicose capilar foi detectada em 49% dos participantes, colesterol elevado em 7% e triglicérides em 11% da população. Os valores de índice de massa corpórea não se associaram à renda, mas houve relação inversa com nível de escolaridade. CONCLUSÃO: Sobrepeso e sedentarismo são os principais fatores de risco cardiovascular em população de industriários.FUNDAMENTO: Determinar los factores de riesgo cardiovascular es esencial para la prevención primaria y secundaria de las enfermedades del aparato circulatorio. OBJETIVO: Obtener la prevalencia de factores de riesgo cardiovascular en una población del sector industrial en Brasil. MÉTODOS: Estudio transversal en una cohorte con entrevista sociodemográfica para identificación de factores de riesgo cardiovascular, medidas antropométricas y de presión arterial y colecta de sangre capilar para dosificación de glucosa, colesterol y triglicéridos en funcionarios de ambos sexos de una industria alimenticia. RESULTADOS: Se evaluaron a 1.047 funcionarios, 913 (87% del sexo masculino, con edad promedio de 36

  17. Proximate Composition, Nutritional Attributes and Mineral Composition of <em>Peperomia> <em>pellucida> L. (Ketumpangan Air Grown in Malaysia

    Directory of Open Access Journals (Sweden)

    Maznah Ismail

    2012-09-01

    Full Text Available This study presents the proximate and mineral composition of <em>Peperomia> <em>pellucida> L., an underexploited weed plant in Malaysia. Proximate analysis was performed using standard AOAC methods and mineral contents were determined using atomic absorption spectrometry. The results indicated <em>Peperomia> <em>pellucida> to be rich in crude protein, carbohydrate and total ash contents. The high amount of total ash (31.22% suggests a high-value mineral composition comprising potassium, calcium and iron as the main elements. The present study inferred that <em>Peperomia> <em>pellucida> would serve as a good source of protein and energy as well as micronutrients in the form of a leafy vegetable for human consumption.

  18. Effects of grit roughness and pitch oscillations on the LS(1)-0417MOD airfoil

    Energy Technology Data Exchange (ETDEWEB)

    Janiszewska, J.M.; Ramsay, R.R.; Hoffman, M.J.; Gregorek, G.M. [Ohio State Univ., Columbus, OH (United States)

    1996-01-01

    Horizontal axis wind turbine rotors experience unsteady aerodynamics due to wind shear when the rotor is yawed, when rotor blades pass through the support tower wake, and when the wind is gusting. An understanding of this unsteady behavior is necessary to assist in the calculations of rotor performance and loads. The rotors also experience performance degradation caused by surface roughness. These surface irregularities are due to the accumulation of insect debris, ice, and/or the aging process. Wind tunnel studies that examine both the steady and unsteady behavior of airfoils can help define pertinent flow phenomena, and the resultant data can be used to validate analytical computer codes. An LS(l)-0417MOD airfoil model was tested in The Ohio State University Aeronautical and Astronautical Research Laboratory (OSU/AARL) 3{times}5 subsonic wind tunnel (3{times}5) under steady flow and stationary model conditions, as well as with the model undergoing pitch oscillations. To study the possible extent of performance loss due to surface roughness, a standard grit pattern (LEGR) was used to simulate leading edge contamination. After baseline cases were completed, the LEGR was applied for both steady state and model pitch oscillation cases. The Reynolds numbers for steady state conditions were 0.75, 1, 1.25, and 1.5 million, while the angle of attack ranged from {minus}20{degrees} to +40{degrees}. With the model undergoing pitch oscillations, data were acquired at Reynolds numbers of 0.75, 1, 1.25, and 1.5 million, at frequencies of 0.6, 1.2, and 1.8 Hz. Two sine wave forcing functions were used, {plus_minus} 5.5%{degrees} and {plus_minus} 10{degrees}, at mean angles of attack of 8{degrees}, 14{degrees}, and 20{degrees}. For purposes herein, any reference to unsteady conditions foil model was in pitch oscillation about the quarter chord.

  19. Estratégia em negócios internacionais: evidência em uma trading company que atua entre economias emergentes International business strategy: evidence from a trading company that operates in emerging economies

    Directory of Open Access Journals (Sweden)

    Karim Marini Thomé

    2013-04-01

    Full Text Available No presente estudo retomam-se os questionamentos de Peng (2004; 2003 a respeito do que direciona a estratégia da firma e do que determina o sucesso ou o fracasso em negócios internacionais. Mais especificamente, investiga-se o que direcionou a estratégia de uma trading company e o que determinou o seu sucesso em negócios internacionais. O referencial teórico é dividido em duas partes. A primeira diz respeito ao negócio da trading company, pautada na atuação triangular de relacionamento entre trading company, clientes e fornecedores. Na segunda parte versa-se sobre as distintas abordagens ou bases da estratégia em negócios internacionais: competição industrial, recursos e capacidades da firma e condições e transições institucionais. O estudo é de natureza descritiva e qualitativa. Na coleta dos dados primários foram utilizados roteiro de entrevistas em profundidade, observação direta não participativa e análise documental, ao longo dos meses de julho de 2010 a janeiro de 2011. O caso selecionado para estudo é uma trading company que apresenta elevado volume transacionado entre economias emergentes. Os resultados evidenciaram que não há direcionador único na estratégia da trading company estudada. O que se observou foi uma variedade de estratégias baseadas ora em competitividade industrial, ora em recursos e capacidades da firma, ora em condições institucionais. Cada direcionador correspondeu, assim, a um determinado momento na trajetória da trading company estudada. Da mesma maneira, não foi observada uma ordem cronológica linear entre os direcionadores, tampouco a obsolescência dos direcionadores. Ao contrario, as evidências apontam que os direcionadores são cumulativos e cíclicos, e necessitam ser revisados e, até mesmo, repensados, em função de atributos organizacionais e de contexto ambiental que se modificam. O determinante de sucesso da trading company estudada em negócios internacionais entre

  20. Evaluation of Antioxidant Activities of Aqueous Extracts and Fractionation of Different Parts of <em>Elsholtzia em>ciliata>

    Directory of Open Access Journals (Sweden)

    Yuangang Zu

    2012-05-01

    Full Text Available The aim of this study was to investigate the antioxidant and free-radical scavenging activity of extract and fractions from various parts of <em>Elsholtzia ciliataem>. The inflorescences, leaves, stems and roots of <em>E. ciliataem> were extracted separately and two phenolic component enrichment methods: ethyl acetate-water liquid-liquid extraction and macroporous resin adsorption-desorption, were adopted in this study. The antioxidant activities of water extracts and fractions of <em>E. ciliataem> were examined using different assay model systems <em>in vitroem>. The fraction root E (purified by HPD300 macroporous resin exhibited the highest total phenolics content (497.2 ± 24.9 mg GAE/g, accompanied with the highest antioxidant activity against various antioxidant systems <em>in vitroem> compared to other fractions. On the basis of the results obtained, <em>E. ciliataem> extracts can be used potentially as a ready accessible and valuable bioactive source of natural antioxidants.

  1. Incorporação de lodo de lavanderia industrial na fabricação de tijolos cerâmicos Incorporation of industrial laundry mud in the production of ceramic bricks

    Directory of Open Access Journals (Sweden)

    L. C. S. Herek

    2009-09-01

    Full Text Available O lodo gerado em ETEs de lavanderias industriais é um material não inerte de Classe IIA, devido �� sua solubilidade em água. Este resíduo tem recebido atenção especial devido à grande quantidade produzida e, consequentemente, ao custo demandado para destino em aterros industriais. O objetivo deste trabalho é avaliar a qualidade dos tijolos cerâmicos de vedação, fabricados com lodo de lavanderia industrial incorporado em massa cerâmica vermelha, pelo processo de extrusão, em escala de laboratório (73 x 35 x 55 mm, com os seguintes percentuais de lodo de lavanderia: 0 (modelo, 5, 10, 15 e 20% em peso. Após a queima, em indústria cerâmica, a qualidade dos tijolos foi analisada por meio de ensaios de resistência à compressão, absorção de água, lixiviação e solubilização. Nos resultados obtidos observou-se que a resistência à compressão é inversamente proporcional à quantidade de lodo adicionada, enquanto a absorção de água é diretamente proporcional à mesma quantidade de lodo adicionada na fabricação dos tijolos. No ensaio de lixiviação nenhum dos metais pesados analisados foi lixiviado; para o ensaio de solubilização nenhum dos metais analisados foi detectado, comprovando que o produto é inerte. De acordo com os resultados obtidos, é possível a fabricação de tijolos de vedação com até 20% de resíduo de lavanderias industriais incorporados em argila.The sludge from wastewater treatment in industrial laundries is a II-A class non-inert material, due to its solubility in water. This waste has been paid special attention, due to the large quantities that are produced and therefore the high cost of the final destination in landfills. This way, the objective of this work was to evaluate the quality of sealing ceramic bricks manufactured with sludge from industrial laundry incorporated in red ceramic mass, by the extrusion process, in laboratory scale (73 x 35 x 55 mm, with the following weight

  2. Allometric and Isometric variations in the Italian <em>Apodemus sylvaticusem> and <em>Apodemus flavicollisem> with respect to the conditions of allopatry and sympatry / Variazioni allometriche e isometriche in <em>Apodemus sylvaticusem> e <em>Apodemus flavicollisem> italiani, rispetto alle condizioni di allopatria e simpatria

    Directory of Open Access Journals (Sweden)

    Giovanni Amori

    1986-12-01

    Full Text Available Abstract In Italy there are two species of <em>Apodemus> (<em>Sylvaemus>: <em>Apodemus sylvaticusem> on the mainland and the main island, and <em>Apodemus flavicollisem> only on the mainland. The trend of some morphometric characters of the skull (incisive foramen length - FI; interorbital breadth = IO; length of palatal bridge = PP; upper alveolar length = $M^1M^3$ was analized and some theoretical models verified for <em>A. sylvaticusem>. If one considers the sympatric population of <em>A. sylvaticusem> and <em>A. flavicollisem> simultaneously the characters PP, IO and $M^1M^3$ appear significantly isometric being directly correlated ($P leq O.O1$, while FI character results allometric with respect to the previous ones, as expected. If one considers the sympatric populations of each of the species separately, the scenario is different. For <em>A. sylvaticusem> only PP and $M^1M^3$ are isometric ($P leq 0.05$. For <em>A. flavicollisem> only $M^1M^3$ and FI appear to be correlated, although not as significantly as for <em>A. sylvaticusem> ($P le 0.05$; one tail. The insular populations of <em>A. sylvaticusem> do not show significant correlations, except for FI and $M^1M^3$ ($P le 0.05$. On the contrary, considering all populations, sympatric and allopatric, of <em>A. sylvaticusem> at the same time are significant correlations ($P le 0.05$ in all combinations of characters, except for those involving the IO. We suggest that the isometric relations in sympatric assemblages are confined within a morphological range available to the genus <em>Apodemus>. In such a space, the two species are split in two different and innerly homogeneous distributions. We found no evidence to confirm the niche variation hypothesis. On the contrary, the variability expressed as SO or CV's appears higher in the sympatric populations than in the allopatric ones, for three of the four characters, confirming previous results

  3. A Novel Apoptosis Correlated Molecule: Expression and Characterization of Protein Latcripin-1 from <em>Lentinula em>edodes> C91–3

    Directory of Open Access Journals (Sweden)

    Min Huang

    2012-05-01

    Full Text Available An apoptosis correlated molecule—protein Latcripin-1 of <em>Lentinula> edodesem> C91-3—was expressed and characterized in <em>Pichia pastorisem> GS115. The total RNA was obtained from <em>Lentinula edodesem> C91–3. According to the transcriptome, the full-length gene of Latcripin-1 was isolated with 3'-Full Rapid Amplification of cDNA Ends (RACE and 5'-Full RACE methods. The full-length gene was inserted into the secretory expression vector pPIC9K. The protein Latcripin-1 was expressed in <em>Pichia pastorisem> GS115 and analyzed by Sodium Dodecylsulfonate Polyacrylate Gel Electrophoresis (SDS-PAGE and Western blot. The Western blot showed that the protein was expressed successfully. The biological function of protein Latcripin-1 on A549 cells was studied with flow cytometry and the 3-(4,5-Dimethylthiazol-2-yl-2,5-Diphenyl-tetrazolium Bromide (MTT method. The toxic effect of protein Latcripin-1 was detected with the MTT method by co-culturing the characterized protein with chick embryo fibroblasts. The MTT assay results showed that there was a great difference between protein Latcripin-1 groups and the control group (<em>p em>< 0.05. There was no toxic effect of the characterized protein on chick embryo fibroblasts. The flow cytometry showed that there was a significant difference between the protein groups of interest and the control group according to apoptosis function (<em>p em>< 0.05. At the same time, cell ultrastructure observed by transmission electron microscopy supported the results of flow cytometry. The work demonstrates that protein Latcripin-1 can induce apoptosis of human lung cancer cells A549 and brings new insights into and advantages to finding anti-tumor proteins.

  4. Characterization of steel grit recovered from ornamental rocks waste by magnetic separation; Caracterizacao da granalha de aco recuperada do residuo de rochas ornamentais por separacao magnetica

    Energy Technology Data Exchange (ETDEWEB)

    Junca, E.; Telles, V.B.; Rodrigues, G.F.; Oliveira, J.R. de; Tenorio, J.A.S., E-mail: eduardojunca@gmail.co [Universidade de Sao Paulo (USP), SP (Brazil). Dept. de Engenharia Metalurgica e de Materiais; Instituto Federal de Ciencia e Tecnologia do Espirito Santo (IFES), Vitoria, ES (Brazil)

    2010-07-01

    The aim of this work is characterization of steel grit recovered from ornamental rock waste by magnetic separation. The magnetic separation was realized in three steps: first, using a high intensity wet magnetic separator, which used only the remaining magnetic field of equipment. In the second step, the magnetic material obtained in the first phase was subjected to a new manual magnetic separation using rare earth magnets. In a third step, magnetic material obtained with rare earth magnets was subjected to manual magnetic separation using ferrite magnets. After the magnetic separation, the material was sent to characterization which was obtained by chemical analysis, scanning electron microscopy, X-ray diffraction and size analysis. The size analysis showed that the concentrate range from 0,5 to 563,67 {mu}m with 4 wt.% over 100 {mu}m and content metallic iron of 93 wt%. (author)

  5. Staphylococcus aureus e Salmonella sp. em queijos de coalho artesanais produzidos em São Rafael, Rio Grande do Norte

    Directory of Open Access Journals (Sweden)

    Tarciara Magley da Fonseca Pereira

    2017-06-01

    Full Text Available O queijo de coalho artesanal é produto de origem animal muito consumido principalmente na região Nordeste do Brasil. É comumente fabricado com leite cru, não pasteurizado, como matéria prima, sem a utilização de boas práticas higiênicas, podendo veicular micro-organismos patogênicos ao consumidor. Assim, objetivou-se avaliar a presença de Salmonella sp. e quantificar Staphyloccocus aureus em queijos de coalho produzidos artesanalmente no município de São Rafael Rio Grande do Norte.Foram realizadas coletas em triplicata em sete queijarias artesanais do município, e, em seguida, os queijos foram transportados imediatamente em caixas isotérmicas, ao Laborátório de Biotecnologia Industrial da Universidade Federal Rural do Semi-Árido, onde foram submetidos à análise microbiológica de forma asséptica, conforme metodologia recomendada pela Instrução Normativa nº 62, de 26 de agosto de 2003, do Ministério da Agricultura, Pecuária e Abastecimento. Todas as amostras apresentaram elevadas contagens de Staphylococcus aureus, estando em desconformidade com o padrão exigido pela legislação brasileira para este grupo microbiano. Foi constatado ausência de Salmonella sp. nas amostras avaliadas. As análises microbiológicas evidenciaram péssimas condições de higiene de todos os queijos estudados, já que os mesmos apresentaram grande contaminação por Staphylococcus aureus, o que pode representar riscos à saúde pública.

  6. Momentos em freios e em embraiagens

    OpenAIRE

    Mimoso, Rui Miguel Pereira

    2011-01-01

    Dissertação para obtenção do Grau de Mestre em Mestrado Integrado em Engenharia Mecânica Nesta dissertação reúnem-se os modelos de cálculo utilizados na determinação dos momentos em freios e em embraiagens. Neste trabalho consideram-se os casos de freios e embraiagens de atrito seco e atrito viscoso. Nos freios de atrito viscoso são considerados casos em que as características dos fluidos não são induzidas, e outros em que são induzidas modificações a essas mesmas características. São a...

  7. The Study of the Impact of Surface Preparation Methods of Inconel 625 and 718 Nickel-Base Alloys on Wettability by BNi-2 and BNi-3 Brazing Filler Metals

    Directory of Open Access Journals (Sweden)

    Lankiewicz K.

    2015-04-01

    Full Text Available The article discusses the impact of surface preparation method of Inconel 625 and 718 nickel-base alloys in the form of sheets on wettability of the surface. The results of the investigations of surface preparation method (such as nicro-blasting, nickel plating, etching, degreasing, abrasive blasting with grit 120 and 220 and manually grinding with grit 120 and 240 on spreading of BNi-2 and BNi-3 brazing filler metals, widely used in the aerospace industry in high temperature vacuum brazing processes, are presented. Technological parameters of vacuum brazing process are shown. The macro- and microscopic analysis have shown that nicro-blasting does not bring any benefits of wettability of the alloys investigated.

  8. The Study Of The Impact Of Surface Preparation Methods Of Inconel 625 And 718 Nickel-Base Alloys On Wettability By BNi-2 And BNi-3 Brazing Filler Metals

    Directory of Open Access Journals (Sweden)

    Lankiewicz K.

    2015-06-01

    Full Text Available The article discusses the impact of surface preparation method of Inconel 625 and 718 nickel-base alloys in the form of sheets on wettability of the surface. The results of the investigations of surface preparation method (such as nicro-blasting, nickel plating, etching, degreasing, abrasive blasting with grit 120 and 220 and manually grinding with grit 120 and 240 on spreading of BNi-2 and BNi-3 brazing filler metals, widely used in the aerospace industry in high temperature vacuum brazing processes, are presented. Technological parameters of vacuum brazing process are shown. The macro- and microscopic analysis have shown that nicro-blasting does not bring any benefits of wettability of the alloys investigated.

  9. Parasitic zoonoses: survey in foxes (<em>Vulpes vulpesem> in the northern Apennines / Zoonosi parassitarie: indagini in volpi (<em>Vulpes vulpesem> dell'Appennino settentrionale

    Directory of Open Access Journals (Sweden)

    Vittorio Guberti

    1991-07-01

    Full Text Available Abstract A parasitological survey on 153 foxes was carried out in the northern Apennines, during the period 1984-1987. The following parasites were identified: <em>Toxocara canisem> (46.4%, <em>Taenia> sp. (17%, <em>Uncinaria stenocephalaem> (11.8%, <em>Mesocestoides lineatusem> (11.1%, <em>Ancylostoma caninumem> (3.9%, <em>Taenia hydatigenaem> (3.3%, <em>Trichuris vulpisem> (3.3%, <em>Dipylidium caninumem> (2.6%, <em>Taenia crassicepsem> (2%. All foxes were negative for <em>Trichinella> sp. A statistical analysis was performed to evaluate differences in the parasitic fauna according to the sex and age classes of the hosts. The role that the fox could have as a reservoir of helminthic zoonoses is discussed. The results are compared with those of similar studies carried out in Italy. Riassunto Nel periodo 1984-1987 è stata condotta un'indagine parassitologica su 153 volpi abbattute nell'Appennino romagnolo. Sono stati reperiti i seguenti parassiti: <em>Toxocara canisem> (46,4%, <em>Taenia> sp. (17%, <em>Uncinaria stenocephalaem> (11,8%, <em>Mesocestoides lineatusem> (11,1%, <em>Ancylostoma caninumem> (3,9%, <em>Taenia hydatigenaem> (3,3%, <em>Trichuris vulpisem> (3,3%, <em>Dipylidium caninumem> (2,6%, <em>Taenia crassicepsem> (2%. Tutte le volpi esaminate sono risultate negative per <em>Trichinella> sp. È stata effettuata l'analisi statistica dei dati per evidenziare eventuali differenze della fauna parassitaria in relazione al sesso e all'età delle volpi. Sulla base dei dati ottenuti viene discussa l'importanza che la Volpe può assumere come serbatoio di zoonosi elmintiche. I risultati acquisiti sono inoltre comparati con quelli ottenuti in analoghe ricerche condotte in Italia.

  10. Fixed-bed gasification for industrial appliances; Gaseificacao em leito fixo para aplicacoes industriais

    Energy Technology Data Exchange (ETDEWEB)

    Makray, Zsolt [Termoquip Energia Alternativa, Campinas, SP (Brazil)

    1988-12-31

    Wood gasification for industrial thermal processes as an alternative to fuel oil has economic, strategic and air pollution advantages. Since 1981, a Brazilian industry developed a line of down-draft gasifiers for industrial heating in the capacity of 0,3 to 3,0 MW thermal. (author) 3 figs.

  11. <em>In Vivoem> Histamine Optical Nanosensors

    Directory of Open Access Journals (Sweden)

    Heather A. Clark

    2012-08-01

    Full Text Available In this communication we discuss the development of ionophore based nanosensors for the detection and monitoring of histamine levels <em>in vivoem>. This approach is based on the use of an amine-reactive, broad spectrum ionophore which is capable of recognizing and binding to histamine. We pair this ionophore with our already established nanosensor platform, and demonstrate <em>in vitroem> and <em>in vivoem> monitoring of histamine levels. This approach enables capturing rapid kinetics of histamine after injection, which are more difficult to measure with standard approaches such as blood sampling, especially on small research models. The coupling together of <em>in vivoem> nanosensors with ionophores such as nonactin provide a way to generate nanosensors for novel targets without the difficult process of designing and synthesizing novel ionophores.

  12. Variabilità morfologica ed ecologica in <em>Neomys fodiensem> e <em>Neomys anomalusem> nell'Appennino settentrionale

    Directory of Open Access Journals (Sweden)

    Dino Scaravelli

    2003-10-01

    Full Text Available I due <em>Neomys> italiani sono ancora da chiarire dal punto di vista della loro caratterizzazione morfologica e ecologica. Il lavoro prende in considerazione un campione di entrambe le specie proveniente da habitat forestali dell?Appennino settentrionale per i quali sono stati identificati i principali parametri ambientali. Vengono quindi descritte la variabilità dei tratti morfologici delle due specie in aree localizzate nel Parco Nazionale Foreste Casentinesi, Monte Falterona e Campigna nell?Appennino tosco-romagnolo. Risultano di sicuro effetto discriminatorio la maschera facciale, il rapporto piede posteriore/coda e i caratteri cranici. Sulla base dei criteri identificativi si sono realizzate rilevazioni di misure corporee per le due specie e una comparazione degli habitat utilizzati. <em>N. fodiensem> appare unica specie nelle faggete-abetine e dominante nei castagneti, mentre nell?Ontaneta e nelle zone aperte e termofile si registra la sola presenza di <em>N. anomalusem>. Mancano entrambi nei prati cespugliati, nella pecceta e nella cerreta. I gradienti presenti sono quindi illustrati. Non appare una differenza altitudinale nel campione esaminato, posto in stazioni tra i 400 e i 1300 m, ma per entrambe vi sono maggiori riscontri nella fascia tra 700 e 850 m. Nell?analisi multivariata rispetto alle altre specie e alle variabili ambientali si riscontra sempre una discreta correlazione con la presenza di acqua di una certa ampiezza, che comunque è significativa solo per <em>N. fodiensem>, mentre risulta di interesse la positiva correlazione di <em>N. anomalusem> con <em>Apodemus sylvaticusem>.

  13. Echolocation calls and morphology in the Mehelyi’s (<em>Rhinolophus mehelyiem> and mediterranean (<em>R. euryaleem> horseshoe bats: implications for resource partitioning

    Directory of Open Access Journals (Sweden)

    Egoitz Salsamendi

    2006-03-01

    Full Text Available Abstract <em>Rhinolophus euryaleem> and <em>R. mehelyiem> are morphologically very similar species and their distributions overlap extensively in the Mediterranean basin. We modelled their foraging behaviour using echolocation calls and wing morphology and, assuming niche segregation occurs between the two species, we explored how it is shaped by these factors. Resting frequency of echolocation calls was recorded and weight, forearm length, wing loading, aspect ratio and wing tip shape index were measured. <em>R. mehelyiem> showed a significantly higher resting frequency than <em>R. euryaleem>, but differences are deemed insufficient for dietary niche segregation. Weight and forearm length were significantly larger in <em>R. mehelyiem>. The higher values of aspect ratio and wing loading and a lower value of wing tip shape index in <em>R. melehyiem> restrict its flight manoeuvrability and agility. Therefore, the flight ability of <em>R. mehelyiem> may decrease as habitat complexity increases. Thus, the principal mechanism for resource partitioning seems to be based on differing habitat use arising from differences in wing morphology. Riassunto Ecolocalizzazione e morfologia nei rinolofi di Mehely (<em>Rhinolophus mehelyiem> e euriale (<em>R. euryaleem>: implicazioni nella segregazione delle risorse trofiche. <em>Rhinolophus euryaleem> e <em>R. mehelyiem> sono specie morfologicamente molto simili, la cui distribuzione risulta largamente coincidente in area mediterranea. Il comportamento di foraggiamento delle due specie è stato analizzato in funzione delle caratteristiche dei segnali di ecolocalizzazione e della morfologia alare, ed è stata valutata l’incidenza di questi fattori nell’ipotesi di una segregazione delle nicchie. È stata rilevata la frequenza a riposo dei segnali ultrasonori, così come il peso, la lunghezza dell’avambraccio, il carico alare, e due

  14. The US DOE EM international program

    Energy Technology Data Exchange (ETDEWEB)

    Elmetti, Rosa R.; Han, Ana M. [U.S. Department of Energy, Washington, D.C. (United States); Roach, Jay A. [Nexergy Technical, LLC., Falls Church, Virginia (United States)

    2013-07-01

    The U.S. Department of Energy (DOE) Office of Environmental Management (EM) conducts international collaboration activities in support of U.S. policies and objectives regarding the accelerated risk reduction and remediation of environmental legacy of the nations' nuclear weapons program and government sponsored nuclear energy research. The EM International Program supported out of the EM Office of the Associate Principal Deputy Assistant Secretary pursues collaborations with foreign government organizations, educational institutions and private industry to assist in identifying technologies and promote international collaborations that leverage resources and link international experience and expertise. In fiscal year (FY) 2012, the International Program awarded eight international collaborative projects for work scope spanning waste processing, groundwater and soil remediation, deactivation and decommissioning (D and D) and nuclear materials disposition initiatives to seven foreign organizations. Additionally, the International Program's scope and collaboration opportunities were expanded to include technical as well as non-technical areas. This paper will present an overview of the on-going tasks awarded in FY 2012 and an update of upcoming international activities and opportunities for expansion into the remainder of FY 2013 and beyond. (authors)

  15. Phytochemical Composition, Antioxidant and Xanthine Oxidase Inhibitory Activities of <em>Amaranthus cruentusem> L. and <em>Amaranthus hybridusem> L. Extracts

    Directory of Open Access Journals (Sweden)

    Jeanne F. Millogo

    2012-06-01

    Full Text Available This paper describes a preliminary assessment of the nutraceutical value of <em>Amaranthus cruentus (A. cruentusem> and <em>Amaranthus hybridus (A. hybridusem>, two food plant species found in Burkina Faso. Hydroacetonic (HAE, methanolic (ME, and aqueous extracts (AE from the aerial parts were screened for <em>in vitroem> antioxidant and xanthine oxidase inhibitory activities. Phytochemical analyses revealed the presence of polyphenols, tannins, flavonoids, steroids, terpenoids, saponins and betalains. Hydroacetonic extracts have shown the most diversity for secondary metabolites. The TLC analyses of flavonoids from HAE extracts showed the presence of rutin and other unidentified compounds. The phenolic compound contents of the HAE, ME and AE extracts were determined using the Folin–Ciocalteu method and ranged from 7.55 to 10.18 mg Gallic acid equivalent GAE/100 mg. Tannins, flavonoids, and flavonols ranged from 2.83 to 10.17 mg tannic acid equivalent (TAE/100 mg, 0.37 to 7.06 mg quercetin equivalent (QE /100 mg, and 0.09 to 1.31 mg QE/100 mg, respectively. The betacyanin contents were 40.42 and 6.35 mg Amaranthin Equivalent/100 g aerial parts (dry weight in <em>A. cruentusem> and <em>A. hybridusem>, respectively. Free-radical scavenging activity expressed as IC50 (DPPH method and iron reducing power (FRAP method ranged from 56 to 423 µg/mL and from 2.26 to 2.56 mmol AAE/g, respectively. Xanthine oxidase inhibitory activities of extracts of <em>A. cruentus em>and <em>A. hybridusem> were 3.18% and 38.22%, respectively.<em> em>The> A. hybridusem> extract showed the best antioxidant and xanthine oxidase inhibition activities. The results indicated that the phytochemical contents of the two species justify their traditional uses as nutraceutical food plants.

  16. Are EM surveys effective in finding drilling sumps in northern Alberta?

    International Nuclear Information System (INIS)

    Muloin, T.; Finlayson, N.

    2005-01-01

    Many non-intrusive environmental and geotechnical problems can be solved by using geophysical electromagnetic (EM) surveys. The oil and gas industry produces large volumes of brines containing hydrocarbons, which if spilled, cause soils to have elevated conductivities resulting from increases in pore water ionic strength. EM surveys are used to guide and reduce clean up costs by delineating and mapping salt impacted areas through the detection of faint changes in ground conductivity. Recent changes to Alberta Environment's well site reclamation certification process requires the delineation of all drilling sumps that do not have adequate drilling mud disposal information. As a result, EM surveys are used more frequently to find suspected saline drilling mud sumps as part of the second phase of a site assessment process. Data from several recent phase 2 site assessments were reviewed to determine if EM surveys are useful in locating drilling sumps. The sites included abandoned oil and gas leases throughout northern Alberta. Information from EM surveys was correlated with empirical lab data and on-site observations

  17. Dermatoses em renais cronicos em terapia dialitica

    Directory of Open Access Journals (Sweden)

    Luis Alberto Batista Peres

    2014-03-01

    Full Text Available Objetivo: As desordens cutâneas e das mucosas são comuns em pacientes em hemodiálise a longo prazo. A diálise prolonga a expectativa de vida, dando tempo para a manifestação destas anormalidades. Os objetivos deste estudo foram avaliar a prevalência de problemas dermatológicos em pacientes com doença renal crônica (DRC em hemodiálise. Métodos: Cento e quarenta e cinco pacientes com doença renal crônica em hemodiálise foram estudados. Todos os pacientes foram completamente analisados para as alterações cutâneas, de cabelos, mucosas e unhas por um único examinador e foram coletados dados de exames laboratoriais. Os dados foram armazenados em um banco de dados do Microsolft Excel e analisados por estatística descritiva. As variáveis contínuas foram comparadas pelo teste t de Student e as variáveis categóricas utilizando o teste do qui-quadrado ou o teste Exato de Fischer, conforme adequado. Resultados: O estudo incluiu 145 pacientes, com idade média de 53,6 ± 14,7 anos, predominantemente do sexo masculino (64,1% e caucasianos (90,0%. O tempo médio de diálise foi de 43,3 ± 42,3 meses. As principais doenças subjacentes foram: hipertensão arterial em 33,8%, diabetes mellitus em 29,6% e glomerulonefrite crônica em 13,1%. As principais manifestações dermatológicas observadas foram: xerose em 109 (75,2%, equimose em 87 (60,0%, prurido em 78 (53,8% e lentigo em 33 (22,8% pacientes. Conclusão: O nosso estudo mostrou a presença de mais do que uma dermatose por paciente. As alterações cutâneas são frequentes em pacientes em diálise. Mais estudos são necessários para melhor caracterização e manejo destas dermatoses.

  18. Cytotoxicity and Glycan-Binding Properties of an 18 kDa Lectin Isolated from the Marine Sponge <em>Halichondria em>okadai>

    Directory of Open Access Journals (Sweden)

    Yasuhiro Ozeki

    2012-04-01

    Full Text Available A divalent cation-independent lectin—HOL-18, with cytotoxic activity against leukemia cells, was purified from a demosponge, <em>Halichondria okadaiem>. HOL-18 is a 72 kDa tetrameric lectin that consists of four non-covalently bonded 18 kDa subunits. Hemagglutination activity of the lectin was strongly inhibited by chitotriose (GlcNAcβ1-4GlcNAcβ1-4GlcNAc, fetuin and mucins from porcine stomach and bovine submaxillary gland. Lectin activity was stable at pH 4–12 and temperatures lower than 60 °C. Frontal affinity chromatography with 16 types of pyridylaminated oligosaccharides indicated that the lectin had an affinity for <em>N>-linked complex-type and sphingolipid-type oligosaccharides with <em>N>-acetylated hexosamines and neuramic acid at the non-reducing termini. The lectin killed Jurkat leukemia T cells and K562 erythroleukemia cells in a dose- and carbohydrate-dependent manner.

  19. Importance of foreign investors for Russian power industry in prospect of energy revolution

    OpenAIRE

    Yaroslava N. Zubkova

    2017-01-01

    The article discusses current state of Russian electric power industry and the main problems of its development in the future of global energy revolution, which will lead to a significant increase in share of renewable energy in global production and consumption of energy and use of industrial energy storage, and will make it possible to change the structure of the industry and significantly reduce electricity prices. Traditional energy generation displacement by renewables associated with em...

  20. Over-Expression of CYP2E1 mRNA and Protein: Implications of Xenobiotic Induced Damage in Patients with <em>De Novoem> Acute Myeloid Leukemia with inv(16(p13.1q22; <em>CBFβ>-MYH11em>

    Directory of Open Access Journals (Sweden)

    Carlos E. Bueso-Ramos

    2012-08-01

    Full Text Available Environmental exposure to benzene occurs through cigarette smoke, unleaded gasoline and certain types of plastic. Benzene is converted to hematotoxic metabolites by the hepatic phase-I enzyme CYP2E1, and these metabolites are detoxified by the phase-II enzyme NQO1. The genes encoding these enzymes are highly polymorphic and studies of these polymorphisms have shown different pathogenic and prognostic features in various hematological malignancies. The potential role of different cytochrome p450 metabolizing enzymes in the pathogenesis of acute myeloid leukemia (AML in an area of active interest. In this study, we demonstrate aberrant CYP2E1 mRNA over-expression by quantitative real-time polymerase chain reaction in 11 cases of <em>de novoem> AML with inv(16; CBFβ-MYH11. CYP2E1 mRNA levels correlated with <em>CBFβ>-MYH11 em>transcript levels and with bone marrow blast counts in all cases. CYP2E1 over-expression correlated positively with NQO1 mRNA levels (R2 = 0.934, n = 7. By immunohistochemistry, CYP2E1 protein was more frequently expressed in AML with inv(16 compared with other types of AML (<em>p> < 0.001. We obtained serial bone marrow samples from two patients with AML with inv(16 before and after treatment. CYP2E1 mRNA expression levels decreased in parallel with <em>CBFβ>-MYH11 em>transcript levels and blast counts following chemotherapy. In contrast, CYP1A2 transcript levels did not change in either patient. This is the first study to demonstrate concurrent over-expression of CYP2E1 and NQO1 mRNA in AML with inv(16. These findings also suggest that a balance between CYP2E1 and NQO1 may be important in the pathogenesis of AML with inv(16.

  1. Análise da Indústria Brasileira de Software com Base em uma Taxonomia das Empresas: Subsídios para a Política Industrial

    Directory of Open Access Journals (Sweden)

    José Eduardo Roselino

    2006-01-01

    Full Text Available As atividades de software foram eleitas como opção estratégica da Política Industrial, Tecnológica e de Comércio Exterior – PITCE a partir da identificação de seu papel crescentemente crucial para o desenvolvimento das mais diversas atividades. A política setorial vem sendo desenhada com o objetivo de alcançar duas metas principais: elevar as exportações brasileiras de software e ampliar a participação das empresas nacionais no mercado doméstico. O artigo apresenta um panorama da indústria brasileira de software que permite discutir a adequação dos objetivos traçados para a política industrial. A abordagem desenvolvida identifica a expressiva presença das empresas de capital nacional em todos os segmentos considerados, ainda que exibindo grandes assimetrias com relação às empresas de capital estrangeiro. O quadro apresentado sugere que o enfoque da política deveria centrar-se no reforço aos aspectos virtuosos já existentes na indústria brasileira de software, concentrando a ação das políticas na consolidação das empresas nacionais para o enfrentamento de um mercado crescentemente competitivo.The software activities have been elected as a strategic option for the Brazilian Technology, Trade and Industrial Policy – PITCE following the recognition of their increasingly crucial role in the development of other activities. The policy for the software industry has been shaped by two main goals: to raise the Brazilian software exports and to increase the market-share of national firms in the domestic market. This paper offers an overview of the Brazilian software industry that helps questioning the adequacy of the policy goals for that industry. The approach developed in the paper identifies an expressive number of Brazilian firms in all segments of the software industry, despite the existence of important asymmetries between national and foreign companies. It suggests that policy-making should focus on the

  2. Avaliação da capacidade de regeneração in vitro em tomateiro industrial Evaluation of the in vitro regeneration capacity in Brazilian industrial tomato

    Directory of Open Access Journals (Sweden)

    MIKLÓS FÁRI

    2000-08-01

    Full Text Available Este trabalho teve por objetivo avaliar a capacidade de regeneração das cultivares de tomateiro industrial (Lycopersicon esculentum Mill IPA-5 e IPA-6, utilizando quatro composições de meio de cultura descritos na literatura e cinco variações de inoculação. Foi testada uma nova variação de inoculação, denominada cotilédone fendido. A maior freqüência de formação de gemas vegetativas foi 100% no caso de IPA-5, e 65% no caso de IPA-6. Para induzir o alongamento de brotos, foram necessários três subcultivos dos explantes apresentando gemas. No caso de IPA-5, o número de brotos obtidos foi maior quando a indução de gemas foi realizada em meio contendo BAP (2,5 mg L-1 e AIA (0,2 mg L-1 seguido de três subcultivos, em meio como zeatina (0,5 mg L-1. Usando esse protocolo, a cultivar IPA-5 produziu uma média de 5,45 brotos alongados a partir do cotilédone fendido. Essa capacidade excedeu significativamente o cotilédone aparado, que produziu 4,4 brotos alongados por explante. No caso de IPA-6, a melhor combinação de meios e método de inoculação produziu 0,87 broto alongado por explante. Os brotos alongados foram enraizados e transferidos para casa de vegetação.The objective of this work was to evaluate the regeneration capacity of the IPA-5 and IPA-6 Brazilian industrial tomato (Lycopersicon esculentum Mill cultivars using four compositions of culture media described in the literature and five inoculation methods. A new variation of inoculation, the split cotyledon method, was also tested. The largest frequency of shoot bud formation was 100% in the case of IPA-5 and 65% in the case of IPA-6. To induce shoot elongation, it was necessary to accomplish three subcultures of the explants presenting shoot buds. In the case of IPA-5, the number of the obtained shoots was higher when the induction of shoot buds was accomplished in culture medium containing BAP (2.5 mg L-1 and IAA (0.2 mg L-1 followed by three subcultures on

  3. Compatibilidade entre exigências do mercado industrial e desempenho dos alunos de administração = Compatibility with industrial requirements and the performance of administration students

    Directory of Open Access Journals (Sweden)

    Leonardo Stephanin

    2017-07-01

    Full Text Available Este estudo teve como objetivo analisar divergências e convergências entre a aprendizagem dos alunos concluintes do curso superior de Administração de uma faculdade privada localizada em Capivari, São Paulo, e as exigências do mercado industrial da cidade. A pesquisa foi desenvolvida em duas etapas, sendo a primeira, uma pesquisa de campo de natureza quantitativa por meio de questionário estruturado com 27 perguntas fechadas e três perguntas abertas, respondido por 13 indústrias, com o intuito de entender as exigências voltadas ao administrador. Posteriormente, foi elaborado um questionário semiestruturado com 35 perguntas fechadas e uma pergunta aberta, respondido por 24 alunos do último ano de Administração a fim de diagnosticar o desempenho em relação aos conteúdos ministrados em sala e indagados às empresas. Na segunda etapa, por meio de entrevista com o diretor da faculdade estudada, foi diagnosticado o posicionamento da instituição diante do curso e do mercado. Os resultados revelaram que há significativa divergência entre os dois âmbitos, porém temas como as estratégias do mix de marketing e a ferramenta “Customer Relationship Management” [CRM] se destacaram positivamente tanto nas exigências das indústrias quanto no desempenho dos alunos. Do mesmo modo, a ferramenta “Material Requirement Planning” [MRP] e os métodos da localização industrial se sobressaíram em aspecto negativo e também se repetindo nas duas visões. = This study aimed to analyze divergences and convergences between the learning of undergraduate students of a private Administration course in a college located in Capivari, São Paulo and the industrial market demands of the city. The research was classified as case study and developed in quantitative and qualitative stages. The first stage was conducted through a structured questionnaire with 27 closed and three open questions answered by 13 industries in order to understand the

  4. Avaliação de um sistema industrial de resfriamento de água.

    OpenAIRE

    Eduardo Hiroshi Oikawa

    2012-01-01

    Neste trabalho, foi estudado o desempenho de um sistema constituído de torres de resfriamento e a sua integração em uma planta industrial de hidrogenação de butadieno. Caracterizou-se o desempenho das torres de resfriamento com base em um modelo fenomenológico, cujos parâmetros foram obtidos a partir da medição de variáveis operacionais reais. O processo de hidrogenação foi configurado em um simulador de processos, sendo o caso base estabelecido nas condições de projeto. Elaborou-se um módulo...

  5. A Norma de Qualidade e os desafios que se colocam ao turismo industrial

    Directory of Open Access Journals (Sweden)

    Cordeiro, José Manuel Lopes

    2017-06-01

    Full Text Available Nas últimas décadas tem-se registado uma cada vez maior diversificação da oferta turística, com o surgimento de novos segmentos, entre os quais o do turismo industrial, ou seja, o aproveitamento turístico do património industrial, contemplando também visitas a fábricas em atividade. A constituição em 2013, pelo Turismo de Portugal, de um Grupo de Trabalho para a elaboração de uma Norma de Qualidade para o Turismo Industrial constituiu um acontecimento relevante nesta área e contribuirá, seguramente, para uma considerável melhoria da qualidade da sua oferta turística. Neste artigo, o autor efetuará uma análise desta Norma e debaterá os desafios que a mesma coloca para garantir boas práticas no domínio deste tipo de oferta turística.

  6. Thermal Studies of Zn(II, Cd(II and Hg(II Complexes of Some <em>N-Alkyl-N>-Phenyl-Dithiocarbamates

    Directory of Open Access Journals (Sweden)

    Peter A. Ajibade

    2012-07-01

    Full Text Available The thermal decomposition of Zn(II, Cd(II and Hg(II complexes of <em>N-ethyl-N>-phenyl and <em>N-butyl-N>-phenyl dithiocarbamates have been studied using thermogravimetric analysis (TGA and differential scanning calorimetry (DSC. The products of the decomposition, at two different temperatures, were further characterized by scanning electron microscopy (SEM and energy-dispersive X-ray spectroscopy (EDX. The results show that while the zinc and cadmium complexes undergo decomposition to form metal sulphides, and further undergo oxidation forming metal oxides as final products, the mercury complexes gave unstable volatiles as the final product.

  7. Efeito da densidade e proporção de plantas de tomate industrial e de maria-pretinha em competição Density and proportion effects of industrial tomato and nightshade plants under competition

    Directory of Open Access Journals (Sweden)

    D.D. Hernandez

    2002-08-01

    Full Text Available O presente trabalho foi realizado com o objetivo de quantificar as interações competitivas e os índices de competitividade entre plantas de tomate industrial (Lycopersicon esculentum cv. Heinz 9553 e maria-pretinha (Solanum americanum. Usou-se como método um experimento substitutivo, com densidade total de 40 plantas m-2 e 11 proporções, além das monoculturas em densidades, que variaram de 20 a 100 plantas m-2, em intervalos de 20 plantas, conduzidos no delineamento de blocos casualizados com três repetições. Os resultados obtidos foram analisados pelo método convencional de análise de experimentos substitutivos e pela produção recíproca total. A maria-pretinha mostrou ser um competidor mais agressivo que o tomate, sendo mais importante a competição interespecífica para a planta cultivada. Para a biomassa seca total, as duas espécies não competiram pelos mesmos fatores de crescimento. Já para a área foliar, as duas espécies se mostraram competidoras pelos mesmos fatores de crescimento, mostrando ser essa a característica mais sensível à interferência.This work aimed to quantify the competitive interactions and the competitiveness indexes among plants of industrial tomato (Lycopersicon esculentum cv. Heinz 9553 and nightshade (Solanum americanum. The methodology used was a replacement series experiment with a total density of 40 plants m-2 and 11 proportions, besides the monocultures in densities varying from 20 to 100 plants m-2, in intervals of 20 plants, conducted in a randomized complete block design with three replications. The results were analyzed by the conventional method of analysis of replacement series experiment and for total reciprocal production. The nightshade plant was shown to be a more aggressive competitor than the tomato, with inter-specific competition being more important for the cultivated plant. For the dry aboveground biomasses, the two species did not compete for the same natural resources

  8. Conservazione e gestione della Lepre italica (<em>Lepus corsicanusem>

    Directory of Open Access Journals (Sweden)

    Francesco Riga

    2003-10-01

    Full Text Available Il recente riconoscimento dello <em>status> specifico della Lepre italica (<em>Lepus corsicanusem> e l?accertamento dell?areale distributivo rappresentano le azioni più importanti per la conservazione di un <em>taxon endemicoem> che si era creduto estinto. Nella penisola la specie presenta un areale discontinuo, il cui limite settentrionale è dato dal comune di Manciano (GR, sul versante tirrenico e da una linea che dalla provincia de L'Aquila arriva al Gargano. In Sicilia la distribuzione è relativamente continua anche in aree non protette. Dati genetici hanno permesso di confermare la presenza in Corsica. Al contrario, nell?Isola d'Elba, a seguito di estese ricerche, sono stati identificati solo esemplari di <em>L. europaeusem>. Nell?Italia peninsulare <em>L. corsicanusem> è spesso presente in simpatria con popolazioni di <em>L. europaeusem>, mentre in Sicilia la lepre europea non ha originato popolazioni stabili, nonostante l?immissione di molte migliaia di individui. La distribuzione ecologica di <em>L. corsicanusem> ed analisi ambientali specifiche, suggeriscono l?adattamento prevalente agli ambienti a clima mediterraneo, benché essa sia presente anche a quote elevate (> 1.500 m s.l.m.. Dati preliminari di abbondanza relativa hanno evidenziato una situazione diversificata tra la penisola e la Sicilia e tra aree a diverso regime di gestione; un confronto tra le aree protette ha evidenziato rispettivamente valori di 5,54 e 11,73 ind./km². La riduzione quali-quantitativa e la frammentazione dell?<em>habitat> delle lepri è un fenomeno potenzialmente pericoloso per la sopravvivenza delle popolazioni, determinando fenomeni di estinzione locale dovuti alle basse densità di popolazione, inducendo fenomeni di erosione della variabilità genetica e di riduzione della <em>fitness> degli individui. L?introduzione di <em>L. europaeusem> può costituire un importante fattore limitante sia per la possibile competizione

  9. Methyl 2-Benzamido-2-(1<em>H>-benzimidazol-1-ylmethoxyacetate

    Directory of Open Access Journals (Sweden)

    Alami Anouar

    2012-09-01

    Full Text Available The heterocyclic carboxylic α-aminoester methyl 2-benzamido-2-(1<em>H>-benzimidazol-1-ylmethoxyacetate is obtained by <em>O>-alkylation of methyl α-azido glycinate <em>N>-benzoylated with 1<em>H>-benzimidazol-1-ylmethanol.

  10. Arquitetura Industrial em Recife: uma face da modernidade

    OpenAIRE

    Maria Vieira Caldas, Renata

    2010-01-01

    Construções ligadas aos processos produtivos (produção, estocagem, distribuição e comercialização) são constituintes de um abrangente grupo denominado edifícios industriais. De um modo geral, estas construções se desenvolveram como parte de dois fenômenos cruciais da modernidade: a mecanização e a industrialização; o que fez delas uma de suas faces ou expressão. Num movimento de redução de suas formas ao estritamente necessário, o edifício industrial passou, ele próprio, a s...

  11. Nordeste industrial: a fragmentação territorial de uma região periférica

    OpenAIRE

    da Silva Filho, Luís Abel; da Silva, Fábio José Ferreira; de Queiroz, Silvana Nunes

    2015-01-01

    A concentração industrial no Brasil condicionou uma série de investigações acerca de suas causas e consequências em âmbito regional e local. Diante disso, este artigo tem como objetivo analisar a concentração industrial no Nordeste brasileiro, a partir da distribuição espacial da mão de obra formal, adotado como indicador de desempenho das atividades industriais na região. Para tanto, recorre-se a revisão de literatura e, em seguida, utilizam-se métodos de análise regional. Os dados são da Re...

  12. Consumidor de moda: estudo da segmentação psicográfica dos consumidores femininos em Portugal

    OpenAIRE

    Moreira, Bárbara Sofia Salgado

    2016-01-01

    Dissertação de mestrado em Economia Industrial e da Empresa Este estudo tem como objetivo principal a segmentação psicográfica dos consumidores femininos no setor da moda em Portugal, pretendo dar resposta à seguinte questão de investigação: Quais as variáveis que podem influenciar os segmentos de mercado baseados em critérios psicográficos, estilos de compra e atitudes perante as marcas dos consumidores? Pretende contribuir para uma melhor compreensão do consumidor de moda fem...

  13. Aplicação da análise custo/volume/lucro em pequena indústria de laticínios = Application of a cost/volume/profit analysis in a small industry of dairy products

    Directory of Open Access Journals (Sweden)

    Rodney Wernke

    2008-11-01

    Full Text Available Relata estudo de caso em que foi aplicada a Análise Custo/Volume/Lucro como instrumento de avaliação do desempenho de uma pequena indústria. Inicialmente foi efetuada uma revisão bibliográfica sobre os conceitos utilizados, especialmente margem de contribuição, ponto de equilíbrio e margem de segurança. Em seguida, descreveu-se o contexto da empresa pesquisada, mostrando suas principais características. Posteriormente foram apresentadas as etapas seguidas para aplicação da Análise Custo/Volume/Lucro. Foram demonstrados os cálculos efetuados e comentados os resultados oriundos mais relevantes para a administração da organização enfocada pelo estudo. Por último, foram elencadas as informações gerenciais obtidas, ressaltadas as limitações inerentes à ferramenta utilizada e sugerido tema para trabalhos futuros.This article reports a study case in which a Cost/Volume/Profit Analysis was applied asa tool to evaluate the performance of a small industry of dairy products. At first, abibliographic revision of the concepts was made, especially contribution margin, balancedpoint and security margin. After, the context of the industry was described, showing itsmain characteristics. After that, the steps which were followed so that the Cost/Volume/Profit Analysis was applied were presented, the calculi made were demonstrated andthe most relevant results from this study were commented for the industry management.Finally, the managerial information obtained was listed; emphasizing the limitations ofthe tool which was used and a theme for further research was suggested.

  14. Produção de mudas de goiabeira (Psidium guajava L., inoculadas com o fungo micorrízico arbuscular Glomus clarum, em substrato agro-industrial Production of guava ( Psidium guajava L. plants inoculated with arbuscular mycorrhizal fungi Glomus clarum, in agro-industrial substrate

    Directory of Open Access Journals (Sweden)

    JOLIMAR ANTONIO SCHIAVO

    2002-08-01

    Full Text Available Conduziu-se um experimento em casa de vegetação, com o objetivo de avaliar o crescimento de mudas de goiabeira (Psidium guajava L., produzidas em blocos prensados, confeccionados com resíduos agro-industriais, e inoculadas com o fungo micorrízico arbuscular (FMA Glomus clarum Nicolson & Schenck. O delineamento experimental utilizado foi o inteiramente casualizado, em esquema fatorial 2 x 2, sendo 2 tratamentos microbiológicos: controle e FMA; e 2 sistemas de produção de mudas: blocos prensados (nova metodologia e tubetes plásticos (tradicional, com 5 repetições. O substrato utilizado para a confecção dos blocos prensados e enchimento dos tubetes foi constituído por uma mistura de bagaço de cana-de-açúcar e torta de filtro (3:1 v/v. O FMA proporcionou aumentos significativos na produção de matéria seca, conteúdo de N e P da parte aérea da goiabeira, apenas no sistema de produção das mudas em blocos prensados. Mudas produzidas e inoculadas em blocos prensados mostraram um aumento de 88% na matéria seca da parte aérea, 82% e 89% para os conteúdos de nitrogênio e fósforo da parte aérea, respectivamente, em relação ao tratamento-controle.A greenhouse experiment was carried out to evaluate the growth of guava plant seedlings, inoculated with arbuscular mycorrhizal fungi (AMF, Glomus clarum Nicolson & Schenck, produced in pressed blocks made with agro-industrial residues. The experimental design utilized was a completely randomized in factorial 2x2, having two microbiological treatments: control and inoculated; two systems of production: pressed blocks (new methodology and plastic tubes (traditional, with 5 repetitions. The substrate utilized to make the pressed blocks and to fill the plastic tubes was constituted by a mixture of sugarcane bagasse and filter cake (3:1 v/v. The AMF inoculation led to a significant increase in dry matter yield and nutrients content of shoot plants, only in pressed blocks. Plants produced in

  15. Trabalho industrial e câncer de pulmão Industrial work and lung cancer

    Directory of Open Access Journals (Sweden)

    Victor Wünsch Filho

    1995-06-01

    Full Text Available Com base em populações hospitalares, foram entrevistados 316 casos e 536 controles para obtenção de informações sobre histórias de trabalho, tabagismo, tabagismo passivo, ocorrência de outros cânceres na família, migração e situação socioeconômica. Os entrevistadores utilizaram um questionário padronizado. Casos e controles foram emparelhados por hospital, sexo e idade. O estudo foi desenvolvido entre 1º de julho de 1990 e 31 de janeiro de 1991 em 14 hospitais da Região Metropolitana de São Paulo, SP (Brasil. Foi elaborada uma classificação por escores como forma de ordenar os indivíduos estudados segundo suas histórias de exposições ocupacionais a cancerígenos, conhecidos para o pulmão, acumulando informações sobre a exposição nos locais de trabalho durante a vida, considerando o tipo de atividade, setor de trabalho e tempo em cada emprego. A análise de regressão logística não-condicional mostrou odds ratio: 1,97 (95% IC: 1,52 a 2,55 para os trabalhadores com maiores escores de exposição. Os resultados permitiram inferir que trabalhadores ligados aos setores de produção de diferentes ramos industriais têm duas vezes o risco de desenvolverem neoplasia pulmonar quando comparados aos trabalhadores envolvidos em atividades não-industriais.In a hospital-based case-control study, 316 lung cancer cases and 536 controls were interviewed for their occupational, smoking, passive smoking, cancer in the family and residential histories as well as social economic status, by trained interviewers, using a standardized questionnaire. Cases and controls were matched by hospital, sex and age. The study was carried out between 1st July 1990 and 31st January 1991 in 14 hospitals in the Metropolitan Region of S. Paulo, the most highly industrialized and urbanized region in Brazil. Score criteria were developed for the ordering of the individuals of the study by occupational exposure to know carcinogens to the lung, in order

  16. Nervous system cancer mortality in an industrialized area of Brazil 1980 - 1993 Mortalidade por câncer do sistema nervoso em uma área industrializada do Brasil 1980-1993

    Directory of Open Access Journals (Sweden)

    MARCILIA DE A. MEDRADO-FARIA

    2000-06-01

    Full Text Available OBJECTIVES: The industrialization process and nervous system cancer (NSC mortality in a urban region of Brazil. METHOD: From registries of the State System of Data Analysis Foundation (SEADE, 103 males deaths by NSC (ICD-9 in Baixada Santista (BS, from 1980 to 1993 were selected. Mortality ratios were calculated comparing the standardized mortality rate for ages over 10 years old (G1 and for the age group from 35 to 64 years old, in the industrialized and non-industrialized areas in three periods: 1980-1993, 1980-86, 1987-93. RESULTS: A statiscally significant high mortality was observed in the industrialized area, for ages over 10 in all periods and only from 1980 to 1993 for ages from 34 to 64. The highest mortality ratio occurred from 1980-86 for ages over 10 - 4.12 (CI 1.79-9.42. CONCLUSION: High mortality was probably related to the environmental and occupational exposure to many organic and inorganic chemical substances, considered carcinogenics, such as aliphatic and aromatic hydrocarbons, organochlorinated, formaldehyde, nitrogenated compounds and heavy metals, found in the port and industrial complex. We discuss the importance of case-control studies in characterizing the association of these and other risk factors in the determination of NSC.OBJETIVO: Estudar o processo de industrialização e a mortalidade por câncer do sistema nervoso (CSN em uma região urbana do Brasil. MÉTODO: Foram selecionados dos registros das Fundação Sistema Estadual de Análise de Dados Estatísticos (SEADE, 103 óbitos por CSN (ICD-9 ocorridos na Baixada Santista, no sexo masculino acima dos 10 anos, de 1980 a 1993. Calcularam-se as razões de mortalidade, padronizadas por idade, comparando as áreas industrializada e não industrializada, nos períodos de 1980-93, 1980-96 e 1987-93. RESULTADOS: Observou-se excesso significante de mortalidade na área industrializada para a população acima de 10 anos, em todos os períodos - 3.11 (CI 1.84-5.32, 4

  17. Activity-Guided Isolation of Antioxidant Compounds from <em>Rhizophora apiculataem>

    Directory of Open Access Journals (Sweden)

    Hongbin Xiao

    2012-09-01

    Full Text Available <em>Rhizophora apiculataem> (<em>R. apiculataem> contains an abundance of biologically active compounds due its special salt-tolerant living surroundings. In this study, the total phenolic content and antioxidant activities of various extract and fractions of stem of <em>R. apiculataem> were investigated. Results indicated that butanol fraction possesses the highest total phenolic content (181.84 mg/g GAE/g dry extract with strongest antioxidant abilities. Following <em>in vitroem> antioxidant activity-guided phytochemical separation procedures, lyoniresinol-3α-<em>O>-β-arabinopyranoside (1, lyoniresinol-3α-<em>O>-β-rhamnoside (2, and afzelechin-3-<em>O>-L-rhamno-pyranoside (3 were separated from the butanol fraction. These compounds showed more noticeable antioxidant activity than a BHT standard in the DPPH, ABTS and hydroxyl radical scavenging assays. HPLC analysis results showed that among different plant parts, the highest content of 13 was located in the bark (0.068%, 0.066% and 0.011%, respectively. The results imply that the <em>R. apiculataem> might be a potential source of natural antioxidants and 13 are antioxidant ingredients in <em>R. apiculataem>.

  18. Synthesis and Spectroscopic Analysis of Novel 1<em>H-Benzo[d>]imidazoles Phenyl Sulfonylpiperazines

    Directory of Open Access Journals (Sweden)

    Amjad M. Qandil

    2012-05-01

    Full Text Available A group of benzimidazole analogs of sildenafil, 3-benzimidazolyl-4-methoxy-phenylsulfonylpiperazines 2–4 and 3-benzimidazolyl-4-methoxy-<em>N,N>-dimethyl- benzenesulfonamide (5, were efficiently synthesized. Compounds 2–5 were characterized by NMR and MS and contrary to the reported mass spectra of sildenafil, the spectra of the piperazine-containing compounds 2–4 showed a novel fragmentation pattern leading to an <em>m/z> = 316. A mechanism for the formation of this fragment was proposed.

  19. ELID

    Indian Academy of Sciences (India)

    \\R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    study to understand the fundamental characteristics of ELID grinding and their influence on surface .... Small hole machining of hard and brittle materials is highly demanded in most of the industrial fields. ..... In the case of the ELID grinding technique, the active sharp grits per unit ... Int. J. Machine Tools Manuf. 39: 839–853.

  20. Osservazioni in cattività sul ciclo stagionale del peso corporeo e sull'efficienza digestiva di <em>Pipistrellus kuhliiem> e <em>Hypsugo saviiem> (Chiroptera: Verspertilionidae

    Directory of Open Access Journals (Sweden)

    Gianna Dondini

    2004-06-01

    Full Text Available Abstract Captivity observation on body weight cycle and digestive efficiency in <em>Pipistrellus kuhliiem> and <em>Hypsugo saviiem> (Chiroptera: Vespertilionidae Many bat species of cold-temperate climate are subject to seasonal variation of temperature and food availability. Fat reserve during summer-autumn is therefore a physiological adaptation to spend the winter months by hibernating or to sustain migration. During a research on bats in urban areas, two juveniles of Kuhl's bat (<em>Pipistrellus kuhliiem>, 2 females and two juveniles of Savi's bat (<em>Hypsugo saviiem>, 1 male and 1 female were collected in 1997 in the urban area of Florence (central Italy. Bats were kept in a cage of 50x40x30 cm with a temperature between 17° and 22° C. Every day they were weighted with an electronic balance before eating mealworms (<em>Tenebrio molitorem>. Digestive efficiency, calculated on dry material, was about 90% for both species. In about six months <em>P. kuhliiem> and <em>H. saviiem> increased on the average of 450% and 280% in weight respectively. Deposition of fat reserve seemed to be faster in <em>P. kuhliiem> than in <em>H. saviiem>. Both species showed a circannual cycle in the variation of weight. Riassunto Molte specie di pipistrelli dei climi temperato-freddi sono soggette a marcate variazioni stagionali di temperatura e disponibilità di cibo. L'accumulo di grasso in tarda estate-autunno è quindi un adattamento fisiologico per trascorrere in ibernazione i mesi invernali o per intraprendere la migrazione. Nell'ambito di una ricerca pluriennale sui pipistrelli in ambienti urbani, 4 esemplari giovani, di cui 2 di Pipistrello albolimbato (<em>Pipistrellus kuhliiem>, 2 femmine e due di Pipistrello di Savi (<em>Hypsugo saviiem>, 1 maschio e 1 femmina, sono stati raccolti nella pianura di Firenze durante l'estate del 1997 e mantenuti in un contenitore di 50x40x30 cm ad

  1. Influência da embalagem e estocagem no conteúdo de betacaroteno e ácido ascórbico em suco de manga “Ubá” industrializado = Influence of package and storage on the content of beta-carotene and ascorbic acid in industrialized “Ubá” mango juice

    Directory of Open Access Journals (Sweden)

    Daniela da Silva Oliveira

    2010-07-01

    Full Text Available Este trabalho investigou o conteudo e avaliou a estabilidade de doisantioxidantes naturais - β-caroteno e acido ascorbico (AA - em suco de manga "Uba" industrializado e armazenado em diferentes tempos de estocagem e correlacionou as recomendacoes de vitaminas A e C com o teor encontrado nos sucos. O β-caroteno e o AA foram analisados nos sucos comercializados em embalagem tetra pak, em cinco tempos de estocagem (1 a 5 meses e em embalagem de vidro, em tres tempos de estocagem (apos 3, 4 e 5 meses de armazenamento. A analise foi realizada por Cromatografia Liquida de Alta Eficiencia (CLAE. Nao foram detectadas diferencas estatisticamente significativas (α = 5% entre os diferentes tempos de estocagem, para ambos os componentes analisados, tanto em embalagens tetra pak quanto em embalagens de vidro. Alem disso, nao foram observadas diferencas significativas entre o conteudo de β-caroteno dos sucos comercializados nas duas embalagens. No entanto, houve diferenca significativa no teor de AA entre as diferentes embalagens, e a embalagem de vidro apresentou maior teor em relacao a embalagem tetrapak. Assim, as perdas ocasionadas especialmente pela permeabilidade da embalagem ao oxigenio deveriam ser alvo de atencao das industrias de alimentos.This work investigated the content and stability of two natural antioxidants . β-carotene and ascorbic acid (AA - in mango juice industrialized and stored during different storage times, correlating the recommendations of vitamins A and C with the content found in the juice. β-carotene and AA were analyzed in juice sold in tetra pak packaging, during five storage times (1 to 5months and in glass containers, during three storage times (after 3, 4 and 5 months of storage. The analysis was carried out using High Performance Liquid Chromatography (HPLC. No statically differences (α = 5 % were found between the different times of storage for both compounds analyzed, both in tetra pak package and glass container

  2. Windows of opportunities and technological innovation in the Brazilian pharmaceutical industry.

    Science.gov (United States)

    Tigre, Paulo Bastos; Nascimento, Caio Victor Machado França do; Costa, Laís Silveira

    2016-11-03

    The Brazilian pharmaceutical industry is heavily dependent on external sources of inputs, capital, and technology. However, the emergence of technological opportunities and the development of biotechnology and the decline of the patent boom and resulting advances by generic drugs have opened windows of opportunities for the local industry. The article examines the Brazilian industry's innovative behavior vis-à-vis these opportunities, showing that although the industry as a whole invests little in innovation, a few large Brazilian companies have expanded their market share and stepped up their investments in research and development, supported by public policies for innovation. Resumo: A indústria farmacêutica brasileira caracteriza-se pela grande dependência de fontes externas de insumos, capital e tecnologia. O surgimento de oportunidades tecnológicas, associadas ao desenvolvimento da biotecnologia e ao fim do boom das patentes com o consequente avanço dos medicamentos genéricos, entretanto, vem abrindo janelas de oportunidades para a indústria local. Este artigo examina o comportamento inovador da indústria brasileira à luz dessas oportunidades, revelando que, embora o conjunto da indústria mantenha baixos níveis de investimentos em inovação, um pequeno grupo de grandes empresas nacionais vem ampliando sua participação no mercado e intensificando seus investimentos em pesquisa e desenvolvimento, apoiados por políticas públicas de inovação.

  3. Maximização da lucratividade em produção conjunta: um caso na indústria frigorífica Maximizing the profitability in joint-production: a case in the poultry industry

    Directory of Open Access Journals (Sweden)

    Ricardo Augusto Cassel

    2006-08-01

    Full Text Available O presente artigo parte do problema do cálculo de custos em indústrias de produção conjunta. Observa-se que a abordagem tradicional adotada para tratar o tema, o método do custo conjunto, apresenta limitações no que tange ao modelo adotado e aos resultados obtidos em termos da análise da lucratividade dos diferentes produtos finais. Como forma de tratar o problema apresenta-se uma abordagem alternativa baseada na Teoria das Restrições suportada por técnicas de Pesquisa Operacional. Visando mostrar as diferenças dos resultados na utilização dos dois métodos, é realizado um estudo de caso em uma unidade de abate e industrialização de aves. Os resultados obtidos, em termos da lucratividade global da operação, apresentam diferenças significativas. A abordagem da Teoria das Restrições aplicada com base na utilização de técnicas de Pesquisa Operacional demonstra-se mais eficaz do prisma da tomada de decisão.This paper discusses the problem related to the costing in joint product industries. Traditional approaches to this subject present limitations regarding the analysis of the individual profitability of each final product. This problem is discussed and an alternative approach based on the Theory of Constraints, and supported by the Operational Research, is proposed. To demonstrate the differences between this new approach and the traditional one, a case study in a poultry company is presented, and the results are discussed.

  4. Performance evaluation of the conventional Brazilian industries radiation protection in the small industrial gauges and industrial radiography areas; Sistema de avaliacao de desempenho em radioprotecao das industrias convencionais brasileiras nas areas de medidores nucleares e radiografia industrial

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Joyra Amaral dos

    1999-08-01

    This works evaluates by punctuation the performance in conventional Brazilian industries radiation protection area which make use of small industrial gauges and industrial radiography. It proposes, procedures for industry self-evaluation, besides a new radiation protection plans pattern for the small industrial gauges area. The data source where inspection reports of Dosimetry Radiation Protection Institute/Nuclear Energy Commission conventional Brazilian industries' radiation protection plans, beyond visitation to the inspection place. The performance evaluation has been realized both in the administrative and operational aspects of the industries. About of 60% of the industries have a satisfactory register control which does not happen to the operational control. The performance evaluation advantage is that industries may self-evaluate, foreseeing Dosimetry Radiation Protection Institute's regulation inspections, correcting its irregularities, automatically improving its services. The number of industries which have obtained satisfactory performance in both areas is below 70%, both in administrative and operational aspects. Such number can be considered a low one as it is radiation protection. The procedures propose in this work aim to improve such a situation. (author)

  5. Faltas ao trabalho por problemas de saúde na indústria Work days lost due to health problems in industry

    Directory of Open Access Journals (Sweden)

    Sylvia Regina Trindade Yano

    2012-05-01

    Full Text Available Neste estudo transversal, estima-se a prevalência de episódios de faltas ao trabalho por motivo de saúde (FTS, e fatores associados, focalizando o trabalho na indústria. A população do estudo foi uma amostra aleatória por conglomerado de 3.403 trabalhadores de 16 a 65 anos residentes em Salvador, Bahia, Brasil. Dados foram obtidos em entrevistas domiciliares. Entre os trabalhadores da indústria, a prevalência em um ano de FTS em geral, foi 12,5%, 5,5% para FTS relacionados ao trabalho, e 4,1% para FTS agravados pelo trabalho. Não houve diferenças estatisticamente significantes em relação aos demais trabalhadores. Fatores associados à FTS foram percepção de perigo no trabalho, história de acidente de trabalho, e saúde autopercebida como ruim. Os resultados indicam que a ocorrência de faltas ao trabalho é comum, tanto na indústria como nos demais ramos de atividade, podem afetar a produtividade, o que requer programas de prevenção de agentes de risco em locais de trabalho.This cross-sectional study estimated the prevalence of work days lost due to health problems and associated factors among industrial workers. The study population was a simple random cluster sample of 3,403 workers from 16 to 65 years of age in the city of Salvador, Bahia State, Brazil. Data were collected with individual home interviews. Among industrial workers, one-year prevalence of work days lost to health problems was 12.5%, of which 5.5% were directly work-related and 4.1% aggravated by work. There were no statistically significant differences when compared to other worker categories. Self-perceived workplace hazards, history of work-related injury, and poor self-rated health were associated with work days lost due to work-related injuries/diseases. The findings showed that work days lost are common among both industrial and non-industrial workers, thereby affecting productivity and requiring prevention programs.

  6. Experimental investigation of surface quality in ultrasonic machining of WC-Co composites through Taguchi method

    Directory of Open Access Journals (Sweden)

    B. S. Pabla

    2016-08-01

    Full Text Available In manufacturing industries, the demand of WC-Co composite is flourishing because of the distinctive characteristics it offers such as: toughness (with hardness, good dimensional stability, higher mechanical strength etc. However, the difficulties in its machining restrict the application and competitiveness of this material. The current article has been targeted at evaluation of the effect of process conditions (varying power rating, cobalt content, tool material, part thickness, tool geometry, and size of abrasive particle on surface roughness in ultrasonic drilling of WC-Co composite. Results showed that abrasive grit size is most influential factor. From the microstructure analysis, the mode of material deformation has been observed and the parameters, i.e. work material properties, grit size, and power rating was revealed as the most crucial for the deformation mode.

  7. Glycosylation of Vanillin and 8-Nordihydrocapsaicin by Cultured <em>Eucalyptus perrinianaem> Cells

    Directory of Open Access Journals (Sweden)

    Naoji Kubota

    2012-05-01

    Full Text Available Glycosylation of vanilloids such as vanillin and 8-nordihydrocapsaicin by cultured plant cells of <em>Eucalyptus perrinianaem> was studied. Vanillin was converted into vanillin 4-<em>O>-b-D-glucopyranoside, vanillyl alcohol, and 4-<em>O>-b-D-glucopyranosylvanillyl alcohol by <em>E. perriniana em>cells. Incubation of cultured <em>E. perrinianaem> cells with 8-nor- dihydrocapsaicin gave 8-nordihydrocapsaicin 4-<em>O>-b-D-glucopyranoside and 8-nordihydro- capsaicin 4-<em>O>-b-D-gentiobioside.

  8. Explorando práticas do desenvolvimento de produtos em pequenas e médias empresas do setor de equipamentos médico-hospitalares Exploring new product development practices in small and medium enterprises in the medical device industry

    Directory of Open Access Journals (Sweden)

    Glauco Henrique de Sousa Mendes

    2012-01-01

    Full Text Available Fatores de sucesso no processo de desenvolvimento de produtos (PDP em empresas de pequeno e médio porte (PMEs do setor de equipamentos médico-hospitalares, do Estado de São Paulo, são identificados e analisados. Um modelo conceitual para explicar o relacionamento entre práticas de gestão do PDP e o desempenho dos novos produtos foi elaborado e testado. O modelo considera oito fatores: vantagem (ou diferenciação do produto, habilidades de marketing, fontes de tecnologia, habilidades da empresa, habilidades do líder de projeto, integração funcional, organização da equipe de projeto e qualidade de execução do PDP. Uma pesquisa de levantamento (survey foi realizada em 30 empresas desse setor, obtendo-se dados de 49 projetos de novos produtos. Os resultados apontam que a gestão do PDP, nessas empresas, deve atentar para ações que promovam as habilidades de marketing e a integração funcional durante o PDP e a qualidade na execução das atividades de pré-desenvolvimento, pois esses fatores, em relação aos demais, têm um impacto positivo relativamente maior no sucesso do novo produto.Critical success factors in new product development (NPD in small and medium enterprises (SMEs in the medical device industry are identified and analyzed. A conceptual model to explain the relationship between management practices and NPD performance was developed and tested. The model considers eight factors: product advantage, marketing skills, sources of technology, company skills, project leader skills, cross-functional integration, project teams' organization, and NPD proficiency. A survey was carried out in 30 companies in this industry collecting data from 49 new product projects. The results highlight the importance for this industry to emphasize activities related to marketing skills, cross-functional integration, and NPD proficiency since these factors have a positive influence on the new product success. Theoretical and managerial

  9. Impossibilidade da renúncia do uso público da razão em Hannah Arendt – “Eichmann em Jerusalém, a banalidade do mal”

    Directory of Open Access Journals (Sweden)

    Edimar Inocencio Brígido

    2017-10-01

    Full Text Available O artigo pretende revisitar a definição de uso público da razão e a impossibilidade da sua renúncia segundo Hannah Arendt com base em elementos que ela identificou na obra: “Eichmann em Jerusalém, um relato sobre a banalidade do mal”. Para tanto, apresenta uma breve evolução do conceito ético-político de razão e seu uso de Sócrates até o Iluminismo e aponta a ligação do pensamento de Arendt ao de Kant, para identificar a ampliação que ela faz da análise do uso da faculdade de julgar desenvolvida por ele. Isso porque a visão oitocentista da faculdade de julgar se mostrou insuficiente para explicar os efeitos históricos que a renúncia ao uso público da razão acarreta para a civilização a partir do fim do século XIX até os dias de hoje. Isso por força da escalada dos genocídios e massacres do período. Para isso, colheu-se dados históricos, literários e de reflexões de autores, cujo pensamento é próximo ao de Arendt e recorreu-se a outras obras da autora, tudo para ilustrar e explicar que a escalada genocida e dos massacres se dá em consonância com o crescimento das sociedades de massa industrial e pós-industrial. A conclusão a que se chega é de que a renúncia à faculdade de julgar derivada do modelo econômico e social atual e leva a uma aporia: uma contraditória ameaça à vida em nome da vida.

  10. Improving reservoir history matching of EM heated heavy oil reservoirs via cross-well seismic tomography

    KAUST Repository

    Katterbauer, Klemens

    2014-01-01

    Enhanced recovery methods have become significant in the industry\\'s drive to increase recovery rates from oil and gas reservoirs. For heavy oil reservoirs, the immobility of the oil at reservoir temperatures, caused by its high viscosity, limits the recovery rates and strains the economic viability of these fields. While thermal recovery methods, such as steam injection or THAI, have extensively been applied in the field, their success has so far been limited due to prohibitive heat losses and the difficulty in controlling the combustion process. Electromagnetic (EM) heating via high-frequency EM radiation has attracted attention due to its wide applicability in different environments, its efficiency, and the improved controllability of the heating process. While becoming a promising technology for heavy oil recovery, its effect on overall reservoir production and fluid displacements are poorly understood. Reservoir history matching has become a vital tool for the oil & gas industry to increase recovery rates. Limited research has been undertaken so far to capture the nonlinear reservoir dynamics and significantly varying flow rates for thermally heated heavy oil reservoir that may notably change production rates and render conventional history matching frameworks more challenging. We present a new history matching framework for EM heated heavy oil reservoirs incorporating cross-well seismic imaging. Interfacing an EM heating solver to a reservoir simulator via Andrade’s equation, we couple the system to an ensemble Kalman filter based history matching framework incorporating a cross-well seismic survey module. With increasing power levels and heating applied to the heavy oil reservoirs, reservoir dynamics change considerably and may lead to widely differing production forecasts and increased uncertainty. We have shown that the incorporation of seismic observations into the EnKF framework can significantly enhance reservoir simulations, decrease forecasting

  11. Yield and fruit quality of industrial tomato under saline irrigation Rendimento e qualidade de fruto do tomate tipo industrial sob irrigação salina

    Directory of Open Access Journals (Sweden)

    Carlos Alberto Brasiliano Campos

    2006-04-01

    Full Text Available Industrial tomato is the most important vegetable crop of the Brazilian agribusiness. Few researches have evaluated the tolerance of this crop to saline stress. In this study, the effects of five levels of salinity of the irrigation water (1, 2, 3, 4, and 5 dS m-1 and two equivalent proportions of Na:Ca:Mg (1:1:0.5 and 7:1:0.5 were tested on yield and quality of fruits of industrial tomato, cultivar IPA 6. Seedlings were transplanted in rhizotrons and grown under plastic covering until fruit ripening. Volume of water for daily irrigations was determined by the difference between the applied and drained volume in the previous irrigation. Unitary increase of water salinity above 1 dS m-1 reduced the commercial and total yield by 11.9 and 11.0%, respectively, and increased the concentration of soluble solids and the titratable acidity of the fruits by 13.9 and 9.4%, respectively. The increase of the proportion of sodium reduced the total and marketable yield, the number of marketable fruits and pulp yield. Water of moderate salinity, with low concentration of sodium, can be used in the irrigation of the industrial tomato, without significant yield losses.O tomate para processamento industrial é a hortaliça mais importante da agroindústria brasileira. Poucas pesquisas têm sido desenvolvidas para avaliar a tolerância da cultura ao estresse salino. Neste estudo, foram testados os efeitos de cinco níveis de salinidade da água de irrigação (1, 2, 3, 4 e 5 dS m-1 e duas proporções equivalentes de Na:Ca:Mg (1:1:0,5 e 7:1:0,5 sobre a produção e a qualidade dos frutos de tomateiro tipo industrial, cultivar IPA 6. As mudas foram transplantadas em rhizotrons e o cultivo foi conduzido sob cobertura plástica até a maturação dos frutos. O volume de água necessário para irrigações diárias foi determinado pela diferença entre o volume aplicado e o drenado na irrigação anterior. O aumento unitário da salinidade da água acima de 1 dS m-1

  12. Direcionadores da adoção de estratégias de postponement: estudo multicaso em empresas da indústria de alimentos Drivers in the adoption of postponement strategy: a multicase study in the food industry

    Directory of Open Access Journals (Sweden)

    Karine Araújo Ferreira

    2012-01-01

    Full Text Available O propósito deste artigo foi investigar a aplicação prática do postponement em empresas alimentícias brasileiras e identificar os direcionadores que motivam/facilitam a adoção do postponement nessas empresas. Seis estudos de caso foram realizados em empresas do segmento de fabricação de conservas de frutas e vegetais, como empresas processadoras de suco laranja e de derivados de tomate. Além de maior discussão sobre o tema e a verificação de sua aplicação em empresas alimentícias, este trabalho traz duas contribuições principais: a primeira é apresentar um quadro teórico com os principais direcionadores para a adoção do postponement identificados na literatura; a segunda é confrontar os direcionadores da pesquisa empírica e teórica, gerando um quadro teórico com os principais direcionadores adaptado para indústria de alimentos.The purpose of this article is to investigate the practice of the postponement strategy in Brazilian food industry companies and identify which drivers that promote/facilitate the adoption of postponement in these companies. Six case studies were realized in processing and canning fruits and/or vegetables companies, such as orange juice and tomatoes processing companies. In addition to further discuss on the issue and verification of its application in food companies, this works presents two main contributions. The first is to present a theoretical framework with the main drivers for postponement strategy adoption based on the literature. The second is confronts the drivers obtained from empirical research and theory, generating the theoretical framework with the main drivers, adapted to the food industry.

  13. Scientific and technological capabilities in health-related areas: opportunities, challenges, and interactions with the industrial sector.

    Science.gov (United States)

    Vargas, Marco Antonio; Britto, Jorge

    2016-11-03

    Characterization of the scientific and technological infrastructure in health and its interactions with the industrial sector provides key elements for understanding the dynamics of innovation in health. This study conducts an exploratory analysis of the potentialities and limitations associated with scientific and technological capabilities in the health area in Brazil and the different links between the scientific and industrial sectors in health. The analysis points to important growth in internationally indexed research output, especially in certain areas such as pharmaceutics, public health, genetics, morphology, physiology, and microbiology. There has also been important growth in research groups that interact with the industrial sector in selected areas of health. The study highlights the importance of building more solid and permanent bridges between companies, research institutions, and the health system, linking the knowledge developed in research institutions to the dynamics of the industrial sector in health. Resumo: A caracterização da infraestrutura científica e tecnológica na área da saúde e das suas formas de articulação com a base produtiva representam elementos centrais na compreensão da dinâmica de inovação em saúde. Este estudo faz uma análise exploratória sobre as potencialidades e limitações associadas às capacitações científicas e tecnológicas na área da saúde no Brasil e as formas de articulação entre a base científica e a base produtiva em saúde. A análise aponta para o crescimento expressivo da produção bibliográfica com circulação internacional no campo da saúde, particularmente em determinadas áreas como farmácia, saúde coletiva, genética, morfologia, fisiologia e microbiologia. Além disso, observa-se um crescimento expressivo dos grupos de pesquisa com relacionamentos com o setor produtivo em áreas selecionadas da saúde. Destaca-se a importância da construção de pontes mais sólidas e

  14. Preferencia alimenticia del ácaro depredador <em>Balaustium> sp. en condiciones controladas

    Directory of Open Access Journals (Sweden)

    Muñoz Karen

    2009-04-01

    Full Text Available

    Se evaluó la preferencia de presas de <em>Balaustium> sp., enemigo natural de diferentes artrópodos plaga, y el cual es nativo de la Sabana de Bogotá. En unidades experimentales construidas con foliolos de plantas de rosa se colocaron independientemente individuos de <em>Balaustium> sp. y se registró el número de presas consumidas. De esta manera se determinó la preferencia de los tres estados móviles del ácaro depredador <em>Balaustium> sp. por diferentes edades de tres presas. Las especies y edades de las presas estudiadas fueron: huevos, ninfas y adultos de <em>Trialeurodes vaporariorumem>, huevos, ninfas y adultos de <em>Tetranychus urticaeem>, y larvas de primer y segundo instar y adultos de <em>Frankliniella occidentalisem>. Los estados menos desarrollados fueron preferidos, aunque se observó que los adultos del depredador tienen gran habilidad para consumir adultos de <em>T. vaporariorumem>. La presa preferida por las larvas de <em>Balaustium> sp. fue los huevos de <em>T. urticaeem> con una proporción de consumo de 0,54 de los huevos que se ofrecieron de esta presa; las deutoninfas del depredador eligieron huevos de <em>T. vaporariorumem> (0,537 o de <em>T. urticaeem> (0,497 y los adultos de <em>Balaustium> sp. prefrieron los huevos de <em>T. vaporariorumem> (0,588.

  15. Ultrasound-Assisted Extraction of Carnosic Acid and Rosmarinic Acid Using Ionic Liquid Solution from <em>Rosmarinus officinalisem>>

    Directory of Open Access Journals (Sweden)

    Chunjian Zhao

    2012-09-01

    Full Text Available Ionic liquid based, ultrasound-assisted extraction was successfully applied to the extraction of phenolcarboxylic acids, carnosic acid and rosmarinic acid, from <em>Rosmarinus officinalisem>. Eight ionic liquids, with different cations and anions, were investigated in this work and [C8mim]Br was selected as the optimal solvent. Ultrasound extraction parameters, including soaking time, solid–liquid ratio, ultrasound power and time, and the number of extraction cycles, were discussed by single factor experiments and the main influence factors were optimized by response surface methodology. The proposed approach was demonstrated as having higher efficiency, shorter extraction time and as a new alternative for the extraction of carnosic acid and rosmarinic acid from <em>R. officinalisem>> em>compared with traditional reference extraction methods. Ionic liquids are considered to be green solvents, in the ultrasound-assisted extraction of key chemicals from medicinal plants, and show great potential.

  16. ANÁLISE DE AÇÕES DE RESPONSABILIDADE SÓCIO AMBIENTAL REALIZADAS POR ORGANIZAÇÕES LOCALIZADAS EM REGIÃO CONSIDERADA PÓLO INDUSTRIAL

    Directory of Open Access Journals (Sweden)

    Andresa Cordeiro Ribeiro

    2013-12-01

    Full Text Available RESUMO:Este artigo aborda a Responsabilidades Social das Empresas (RSE na região sudeste do país. Este analisa quais as ações socioambientais que duas metalúrgicas localizada na região de polo industrial têm praticado e como estas têm refletido em sua comunidade local, bem como os benefícios que a organização têm adquirido com tal prática. Ações que nos dias de hoje são essenciais para oferecer um desenvolvimento sustentável a região, uma vez que a comunidade tem valorizado mais os serviços e produtos que estão em acordo com o meio ambiente. Desta forma, questões como ética, respeito e parcerias são discutidas ao longo do trabalho. Para fazer esta análise foram feitos revisão de literatura e estudos descritivos onde pôde-se constatar que as organizações têm se preocupado com os impactos que suas ações podem causar ao meio ambiente levando-as a darem um destino a seus resíduos de forma mais consciente.PALAVRAS-CHAVE: Responsabilidade Social, Comunidade, Ética.ABSTRACT: This article discusses the Social Responsibilities (CSR in the southeastern region of the country .This examines what environmental actions that two metals located in the industrial region have been practicing and how these are reflected in his local community as well as the benefits that the organization has gained from such practice.Shares that today are essential to deliver sustainable development in the region, since the community has reclaimed more services and products that are in accord with the environment.Therefore, issues such as ethics, respect and partnerships are discussed throughout the paper.To do this analysis, we made a literature review and descriptive studies where one may observe that organizations have been concerned with the impacts that their actions can cause to the environment causing them to give their waste to a destination in a more conscious. KEYWORDS: Social Responsibility, Community, EthicsRecebido: 21/06/2013

  17. Antioxidant Profile of <em>Trifolium pratenseem> L.

    Directory of Open Access Journals (Sweden)

    Heidy Schwartsova

    2012-09-01

    Full Text Available In order to examine the antioxidant properties of five different extracts of <em>Trifolium pratenseem> L. (Leguminosae leaves, various assays which measure free radical scavenging ability were carried out: 1,1-diphenyl-2-picrylhydrazyl, hydroxyl, superoxide anion and nitric oxide radical scavenger capacity tests and lipid peroxidation assay. In all of the tests, only the H2O and (to some extent the EtOAc extracts showed a potent antioxidant effect compared with BHT and BHA, well-known synthetic antioxidants. In addition, <em>in vivo em>experiments were conducted with antioxidant systems (activities of GSHPx, GSHR, Px, CAT, XOD, GSH content and intensity of LPx in liver homogenate and blood of mice after their treatment with extracts of <em>T. pratenseem> leaves, or in combination with CCl4. Besides, in the extracts examined the total phenolic and flavonoid amounts were also determined, together with presence of the selected flavonoids: quercetin, luteolin, apigenin, naringenin and kaempferol, which were studied using a HPLC-DAD technique. HPLC-DAD analysis showed a noticeable content of natural products according to which the examined <em>Trifolium pratenseem> species could well be regarded as a promising new source of bioactive natural compounds, which can be used both as a food supplement and a remedy.

  18. Bioassay-Guided Antidiabetic Study of <em>Phaleria macrocarpaem> Fruit Extract

    Directory of Open Access Journals (Sweden)

    Mohd Z. Asmawi

    2012-04-01

    Full Text Available An earlier anti-hyperglycemic study with serial crude extracts of <em>Phaleria macrocarpaem> (PM fruit indicated methanol extract (ME as the most effective. In the present investigation, the methanol extract was further fractionated to obtain chloroform (CF, ethyl acetate (EAF, <em>n>-butanol (NBF and aqueous (AF fractions, which were tested for antidiabetic activity. The NBF reduced blood glucose (<em>p> < 0.05 15 min after administration, in an intraperitoneal glucose tolerance test (IPGTT similar to metformin. Moreover, it lowered blood glucose in diabetic rats by 66.67% (<em>p> em>< 0.05, similar to metformin (51.11%, glibenclamide (66.67% and insulin (71.43% after a 12-day treatment, hence considered to be the most active fraction. Further fractionation of NBF yielded sub-fractions I (SFI and II (SFII, and only SFI lowered blood glucose (<em>p em>< 0.05, in IPGTT similar to glibenclamide. The ME, NBF, and SFI correspondingly lowered plasma insulin (<em>p em>< 0.05 and dose-dependently inhibited glucose transport across isolated rat jejunum implying an extra-pancreatic mechanism. Phytochemical screening showed the presence of flavonoids, terpenes and tannins, in ME, NBF and SFI, and LC-MS analyses revealed 9.52%, 33.30% and 22.50% mangiferin respectively. PM fruit possesses anti-hyperglycemic effect, exerted probably through extra-pancreatic action. Magniferin, contained therein may be responsible for this reported activity.

  19. Gastric and colorectal cancer mortality in an urban and industrialized area of Brazil Mortalidade por cânceres gástrico e colorretal em uma área urbana-industrial do Brasil

    Directory of Open Access Journals (Sweden)

    Marcilia de Araujo Medrado-Faria

    2001-04-01

    and genetic susceptibility.OBJETIVO: Estudar a mortalidade por cânceres gástrico e colorretal na Baixada Santista, região Sudeste do Brasil, onde situa-se importante complexo urbano-industrial. MÉTODO: Dos registros da Fundação Sistema Estadual de Análise de Dados (SEADE, obteve-se 1105 óbitos por câncer gástrico (CID 153-154 e 690 por câncer colorretal (CID 151, ocorridos em homens acima dos dez anos, residentes na Baixada Santista no período de 1980 a 1993, que encontram-se distribuídos entre os quatro municípios vinculados ao complexo industrial-portuário (área industrializada e os quatro municípios situados fora dele (área não industrializada. Para cada câncer e para as áreas foram calculadas as taxas de mortalidade, padronizadas pela população mundial de 1960. Calculou-se então as razões entre essas taxas nos períodos de 1980-93, 1980-86 e 1987-93. RESULTADOS: As taxas de mortalidade para o câncer colorretal foram significantemente mais altas na área industrializada com razões de 1,6 [IC 1,22 -- 2,29], 1,6 [IC 1,2 -- 2,0] e 1,6 [IC 1,3 -- 2,0], respectivamente nos períodos de 1980-86, 1987-93 e 1980-93. O câncer gástrico não apresentou diferença entre as áreas industrializadas e não industrializadas, mas decresceu significantemente na Baixada Santista entre os períodos de 1980-86 e 1987-93. CONCLUSÕES: O excesso de mortalidade por câncer colorretal na área industrializada pode estar relacionado com a exposição a numerosos carcinogênicos orgânicos (hidrocarbonetos aromáticos e alifáticos clorados e metais (cádmio, cromo e níquel presentes na região. A diferença não significante para o câncer gástrico entre as duas áreas e o decréscimo nos últimos anos estaria refletindo predominantemente os avanços na qualidade de vida nas áreas urbanas. Esses resultados demandam a realização de estudos caso-controle para analisar as associações entre esses cânceres e os fatores ambientais (ocupacionais, urbano

  20. Variabilidade genética em trigos brasileiros a partir de caracteres componentes da qualidade industrial e produção de grãos Genetic variability for bread making quality and grain yield among Brazilian wheat genotypes

    Directory of Open Access Journals (Sweden)

    Douglas André Mallmann Schmidt

    2009-01-01

    Full Text Available O melhoramento genético para a qualidade industrial do trigo pode representar uma oportunidade de agregar valor de mercado aos produtos agrícolas, sendo o trigo um dos cereais com maior associação entre a qualidade intrínseca e a remuneração ao agricultor. O objetivo do trabalho foi o de determinar a variabilidade genética a partir de caracteres indicativos da qualidade industrial e o rendimento de grãos, e estimar o grau de associação entre estes caracteres em 22 genótipos de trigo. O experimento foi desenvolvido em área experimental pertencente à Universidade Federal de Pelotas, Capão do Leão (RS. Os resultados indicaram a provável existência de variabilidade genética para os caracteres em estudo, a qual pode auxiliar pesquisadores na escolha de genitores. Cruzamentos artificiais envolvendo os genótipos BRS 208, Rubi e Safira podem ser os mais promissores no intuito de incrementar o ganho genético, tanto para a qualidade industrial quanto para a produtividade de grãos. O rendimento de grãos manifestou correlação negativa com o conteúdo de proteína da farinha revelando que a superioridade genotípica para o rendimento de grãos pode afetar negativamente a proporção protéica. Entretanto, o conteúdo de proteína não evidenciou associação significativa com a força de glúten (indicador da qualidade industrial, revelando que a concentração de proteína da farinha não foi eficiente para predizer a qualidade industrial. Este resultado sugere a possibilidade de obtenção de genótipos superiores para o rendimento de grãos sem comprometer a qualidade industrial.The breeding for wheat bread making quality represents a great opportunity to incorporate commercial value to agricultural products. Wheat has one of the best relationship between end product quality and farmer earnings. Genetic variability among 22 different genotypes based on bread making quality traits and grain yield and the degree of their association

  1. Alimentazione di <em>Marmota marmotaem> in praterie altimontane delle dolomiti bellunesi

    Directory of Open Access Journals (Sweden)

    Alessandro Rudatis

    2006-03-01

    Full Text Available Abstract The diet of <em>Marmota marmotaem> in the mountain prairie of south-eastern Italian Alps. Diet composition of two family groups of alpine marmots was investigated in two areas of the Agordino’s Dolomites (Italian Alps in June-September 2001, by means of microscopic analysis of faeces and of direct observation of feeding activity. During the whole period of activity, a high consume of Angiosperms was confirmed, especially plants in flower; among them the “graminoids” seemed to play an important role only during the initial part of the active period. Generally vegetative parts predominated over flowers. The ingestion of animal preys was not confirmed by the analysis of droppings. Comparing diet composition of the two groups, Graminaceae (<em>Poa>, <em>Phleum>, Compositae (<em>Achillea>, Cyperaceae/Juncaceae, Leguminosae (<em>Anthyllis>, Rosaceae, and Labiatae (<em>Prunella>, <em>Stachys> formed the bulk of marmot diet in the study areas. Diet showed low diversity considering the abundance of plant species in the surrounding environment. Food resources were probably used in relation to their easy digestibility, with a high content in proteins, sugar and water. The knowledge of vegetation features in relation to marmot trophic habits can represent a useful tool for the management of this species. Riassunto Il regime alimentare di due gruppi di Marmotta alpina è stato studiato in giugno-settembre 2001 in due aree delle Dolomiti agordine (SE Italia, attraverso l’analisi microscopica delle feci e l’osservazione diretta dell’attività alimentare. Durante tutto il periodo di attività si è notato un forte consumo di Angiosperme, specialmente piante a fiore, mentre le ”graminoidi” sembra giochino un ruolo importante all’inizio della stagione. In generale le parti vegetali predominano sui fiori. L’ingestione di prede animali non è stata

  2. MAICAPI - metodologia para avaliação de impactos e custos ambientais em processos industriais: estudo de caso Methodology for assessment of environmental impacts and costs in industrial processes: a case study

    Directory of Open Access Journals (Sweden)

    Paulo Ricardo Santos da Silva

    2006-09-01

    Full Text Available A preservação do meio ambiente, o uso racional de recursos naturais e a mudança de postura da sociedade frente às questões ambientais têm levado as indústrias a buscar um melhor desempenho nessa área. Aliado a esses fatores, está a constatação de que a geração de rejeitos é sinônimo de perdas econômicas. Desta forma, um melhor desempenho ambiental representa ganhos financeiros para a organização. Em vista disso, este artigo apresenta a Metodologia MAICAPI, desenvolvida para avaliar os impactos e os custos ambientais de processos industriais. Sua aplicação em uma indústria metal-mecânica, fabricante de incineradores industriais, permitiu identificar quais as etapas do processo produtivo apresentam impactos ambientais críticos, revelando as operações que mais contribuem para os custos ambientais dessa empresa.Nowadays, industries are searching a better environmental performance stimulated by changes in society behavior concerning to environmental issues and reasonable use for natural resources. In addition, companies realized that they have economic losses producing wastes. So, a better environmental perfomance means financial benefits to the organization. This work presents MAICAPI Methodology developed to evaluate environmental impacts and costs in industrial processes. This methodology was applied on an incinerator machine factory and it allowed to identify process phases whose environmental impacts were critics. Besides, the methodology application also identified operations with higher environmental costs in this company.

  3. Consumer protection through a legislative ban on industrially produced <em>trans> fatty acids in foods in Denmark

    DEFF Research Database (Denmark)

    Stender, Steen; Dyerberg, Jørn; Astrup, Arne

    2006-01-01

    or quality of foods previously containing high amounts of IP-TFA. Various public health organizations, including the World Health Organization, have recommended reducing the consumption of IP-TFA, and efforts have been made in several countries to comply, through the mandatory TFA labelling of prepackaged......Legislation has, within a few years, virtually eliminated the intake of industrially produced trans fatty acids (IP-TFA) in Denmark, by banning any food with an IP-TFA content greater than 2% of total fat. This accomplishment has been obtained without noticeable effects on the availability, price...... food, societal pressure and industrial initiatives to lower the content of IP-TFA in foods. Yet still, high concentrations of IP-TFA are found in popular foods in several countries including Norway and Sweden. This indicates that millions of people currently have intakes of IP-TFA that increase...

  4. Radiologic accidents in industrial gamma radiography - Brazilian cases; Acidentes radiologicos em gamagrafia industrial - casos brasileiros

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Francisco Cesar Augusto da [Instituto de Radioprotecao e Dosimetria (IRD), Rio de Janeiro, RJ (Brazil)

    1997-12-31

    Three severe radiological accidents in industrial gamma radiography happened in Brazil during the period of 1985 to 1988. Five operators and nineteen public people were involved. These accidents caused some injuries in parts of the body, mainly hands and fingers. The main causes were faults in source monitoring, inadequate routine procedures and unknowing of radiation warning symbol by public people. The present paper shows the Brazilian cases of radiological accidents and makes some analysis of them. (author) 1 ref., 1 tab.; e-mail: dasilva at ird.gov.br

  5. <em>Ipomoea aquaticaem> Extract Shows Protective Action Against Thioacetamide-Induced Hepatotoxicity

    Directory of Open Access Journals (Sweden)

    A. Hamid A. Hadi

    2012-05-01

    Full Text Available In the Indian system of traditional medicine (Ayurveda it is recommended to consume <em>Ipomoea em>aquatica> to mitigate disorders like jaundice. In this study, the protective effects of ethanol extract of <em>I. aquaticaem> against liver damage were evaluated in thioacetamide (TAA-induced chronic hepatotoxicity in rats. There was no sign of toxicity in the acute toxicity study, in which Sprague-Dawley (SD rats were orally fed with <em>I. aquaticaem> (250 and 500 mg/kg for two months along with administration of TAA (i.p injection 200 mg/kg three times a week for two months. The results showed that the treatment of <em>I. aquaticaem> significantly lowered the TAA-induced serum levels of hepatic enzyme markers (ALP, ALT, AST, protein, albumin, bilirubin and prothrombin time. The hepatic content of activities and expressions SOD and CAT that were reduced by TAA were brought back to control levels by the plant extract supplement. Meanwhile, the rise in MDA level in the TAA receiving groups also were significantly reduced by <em>I. aquaticaem> treatment. Histopathology of hepatic tissues by H&E and Masson trichrome stains displayed that <em>I. aquaticaem> has reduced the incidence of liver lesions, including hepatic cells cloudy swelling, infiltration, hepatic necrosis, and fibrous connective tissue proliferation induced by TAA in rats. Therefore, the results of this study show that the protective effect of <em>I. aquaticaem> in TAA-induced liver damage might be contributed to its modulation on detoxification enzymes and its antioxidant and free radical scavenger effects. Moreover, it confirms a scientific basis for the traditional use of <em>I. aquaticaem> for the treatment of liver disorders.

  6. Classe social: conceitos e esquemas operacionais em pesquisa em saude

    Directory of Open Access Journals (Sweden)

    Rita Barradas Barata

    2013-08-01

    Full Text Available Discute-se a utilização do conceito de classe em pesquisas em saúde, as diferentes abordagens sociológicas de estratificação social e de estrutura de classes, o potencial explicativo do conceito em estudos de determinação social e desigualdades em saúde, os modelos de operacionalização elaborados para uso em pesquisas sociológicas, demográficas ou de saúde e os limites e possibilidades desses modelos. Foram destacados quatro modelos de operacionalização: de Singer para estudo da distribuição de renda no Brasil, adaptado por Barros para uso em pesquisas epidemiológicas; de Bronfman & Tuirán para o censo demográfico mexicano, adaptado por Lombardi et al para pesquisas epidemiológicas; de Goldthorpe para estudos socioeconômicos ingleses, adaptado pela Sociedade Espanhola de Epidemiologia; e o modelo de Wright para pesquisa em sociologia e ciência política, também usado em inquéritos populacionais em saúde. Em conclusão, conceitualmente cada um dos modelos apresentados é coerente com a concepção teórica que os embasam, mas não há como optar por qualquer deles, descartando os demais.

  7. Francisco Ferreira Saturnino Braga: negócios e fortuna em Campos dos Goytacazes

    Directory of Open Access Journals (Sweden)

    Walter Luiz Carneiro de Mattos Pereira

    2012-12-01

    Full Text Available O artigo pretende investir no estudo da dinâmica da economia em Campos dos Goytacazes, Rio de Janeiro, nas duas décadas que antecedem a abolição da escravatura no Brasil, a partir dos negócios e da fortuna de Francisco Ferreira Saturnino Braga, proprietário de terras, escravos, usineiro, industrial, concessionário de ferrovias e banqueiro, figura-chave para se perceberem as transformações ocorridas em uma área de produção açucareira voltada para o mercado interno. As singularidades e particularidades obtidas pela observação em escala reduzida podem revelar a possibilidade de perceber uma articulação mais ampla com as estruturas de uma economia de mercado.The article intends to invest in the study of the dynamics of the economy in Campos dos Goytacazes, Rio de Janeiro, in the two decades preceding the abolition of slavery in Brazil, from the business and fortune of Francisco Ferreira Saturnino Braga, owner of land, slaves, mill owner, industrial, railroad dealer and banker, a key figure to understand the changes occurred in an area of the sugar production directs to the domestic market. The singularities and particularities obtained by observation in small scale may reveal the possibility of perceiving a broader articulation with the structures of a market economy.

  8. Análise comparativa da concentração industrial e de turnover da indústria farmacêutica no Brasil para os segmentos de medicamentos de marca e genéricos Comparative analysis of the Industrial Concentration and Turnover of the pharmaceutical industry in Brazil for the segments of mark and generic drugs

    Directory of Open Access Journals (Sweden)

    Gerson Rosenberg

    2010-04-01

    Full Text Available Este artigo analisa a evolução da estrutura do segmento de medicamentos de marca e genéricos no Brasil a partir de 1997. Após a entrada dos medicamentos genéricos, constatou-se que não houve diminuição significativa da concentração na indústria farmacêutica brasileira, porém, o mesmo não ocorreu em nível mundial, verificando-se um aumento da concentração a partir de 2001, impulsionado pelo expressivo processo de fusões e aquisições nos últimos anos da década de 1990. Em relação ao turnover, notou-se que este foi muito baixo para o grupo das maiores empresas em ambos os segmentos de medicamentos. Entretanto, observa-se um elevado turnover com a entrada dos genéricos, mostrando o fortalecimento da indústria nacional. Verifica-se que o processo de fusões e aquisições entre empresas nacionais é pouco significativo, o que pode ser uma alternativa para as pequenas empresas farmacêuticas aumentarem a sua participação no mercado brasileiro.This paper analyzes the evolution of brand-name and generic drugs structure in Brazil since 1997. After the introduction of generic drugs it was not verified a significant decrease in the concentration of Brazilian pharmaceutical industry. The process of mergers and acquisitions in the 90's enhanced the process of concentration in the international market. However, a non-expressive turnover can be demonstrated in both pharmaceutical and generic markets. At the same time, the entrance of the generic industry in Brazil explains the invigoration of the national industry. The mergers and acquisitions process in the pharmaceutical industry is quite intense in Europe and in the USA, although in Brazil it is still not significant.

  9. IMPLEMENTAÇÃO DO PLANEJAMENTO ESTRÁTEGICO FUNCIONAL: ESTUDO DE CASO EM UMA INDÚSTRIA DE BEBIDAS

    OpenAIRE

    Breno Antonio Jacobi

    2006-01-01

    Este trabalho visa, através de um estudo de caso, em uma indústria de bebidas de Santa Maria-RS, analisar e integrar o Planejamento Estratégico Corporativo ao nível tático e operacional. A empresa, objeto deste estudo, CVI Refrigerantes Ltda, fabricante do sistema Coca-Cola Brasil, fabrica bebidas carbonatadas e revende bebidas não carbonatadas e alcoólicas. Apresenta, em seu organograma, seis departamentos distintos: Sistemas, Marketing, Administrativo-Financeiro, Comercial, Industrial...

  10. The diet of the fox (<em>Vulpes vulpesem> in woodlands of Orobie Alps (Lombardy region, Northern Italy / Alimentazione della Volpe (<em>Vulpes vulpesem> in aree boscate delle Alpi Orobie

    Directory of Open Access Journals (Sweden)

    Marco Cantini

    1991-07-01

    Full Text Available Abstract The diet of the fox was investigated by analysis of 273 scats, collected along standard trails from April to November 1987 and 1988. Food habits of foxes were described for three altitudinal ranges. Mammals, mainly <em>Clethrionomys glareolusem> and <em>Microtus multiplexem>, were the staple food (percentage of frequency 42.8%, followed by fruits and other vegetables (26.7% and 37.3% respectively. Birds, Invertebrates (mainly Insects and garbage were little eaten. The game species (ungulates, hares, pheasants occurred with a low frequency (8.4% in the diet. The trophic niche breadth varied little through the altitudinal ranges and the seasons. The trophic niche overlap between the fox and the genus <em>Martes> (190 scats of <em>M. martesem> and <em>M. foinaem> were examined is relatively wide (O=0.868. Riassunto La dieta della Volpe (<em>Vulpes vulpesem> in aree boscate delle Alpi Orobie (Val Lesina è stata indagata nel periodo aprile-novembre 1987 e 1988 mediante l'analisi di 273 feci, raccolte lungo percorsi-campione ricadenti in tre piani vegetazionali. I Mammiferi, in particolare <em>Clethrionomys glareolusem> e <em>Microtus multiplexem>, sono la componente principale della dieta (frequenza percentuale 42,8%. Rilevante è anche il consumo di frutti (soprattutto in estate e autunno e di altri vegetali (26,7% e 37,3% rispettivamente, mentre poco frequente è quello di Uccelli, Invertebrati e rifiuti. Complessivamente ridotta è l'azione predatoria della Volpe nei confronti delle specie di interesse venatorio (Ungulati, lepri, Galliformi. L'ampiezza della nicchia trofica mostra modeste variazioni stagionali e altitudinali. I1 grado di sovrapposizione tra la nicchia trofica della Volpe e quella del genere <em>Martes>, quest'ultima ricavata dall'analisi di 190 feci di Martora (<em>M. martesem> e Faina (<em>M. foinaem>, è elevato (O=0,868. Tuttavia, poiché in condizioni di

  11. Desenvolvimento e caracterização de salgadinho produzido a partir de gritz de milho nixtamalizado

    Directory of Open Access Journals (Sweden)

    L. A. M. Pinto

    2015-10-01

    Full Text Available Neste trabalho, buscou-se o enriquecimento nutricional de salgadinhos produzidos a partir da extrusão do gritz de milho, para tanto, duas diferentes formulações foram testadas. A primeira formulação consistiu em utilizar o gritz de milho aplicando-se o processo de nixtamalização; processo este conhecido pelo tratamento do gritz alcalinamente, utilizando o hidróxido de cálcio como agente de tratamento, enquanto que a segunda formulação, foi desenvolvida com gritz sem tratamento. Para a caracterização dos salgadinhos foram realizadas análises da composição centesimal e mineral, cor, textura e índice de expansão. Em relação à composição centesimal e concentração de cálcio, a amostra nixtamalizada apresentou diferença significativa para os parâmetros de cinzas, fibras e cálcio. Os valores obtidos para cinzas, foram de 0,44%±0,02 para os salgadinhos tratados e de 0,24%±0,08 para os não tratados. Para o teor de fibra os valores alcançados foram de 0,83%±0,16 e 0,40%±0,03, para os salgadinhos produzidos com tratamento e sem tratamento, respectivamente. Para o teor de cálcio, constatou-se um aumento superior a 6 vezes entre as formulações, em que 3,02±0,01 (gCa/Kgsnack foram obtidos para o salgadinho nixtamalizado e 0,49±0,003 (gCa/Kgsnack para os salgadinhos produzidos pelo gritz sem aplicação do tratamento. Os teores de umidade, proteínas e lipídeos, não apresentaram diferença significativa entre as formulações. A análise de cor mostrou que o salgadinho não sofreu influência do tratamento alcalino, porém a amostra tratada apresentou croma mais intensa. Já para a textura, a nixtamalização exerceu influência significativa para este parâmetro, em que os valores obtidos variaram de 1,95±0,49 N a 0,74±0,16 N para a amostra tratada e para a amostra sem tratamento, respectivamente. O índice de expansão (IE está diretamente relacionado com a crocância dos salgadinhos, dessa maneira, o (IE

  12. Osservazioni in cattività sul ciclo stagionale del peso corporeo e sull'efficienza digestiva di <em>Pipistrellus kuhliiem> e <em>Hypsugo saviiem> (Chiroptera: Vespertilionidae

    Directory of Open Access Journals (Sweden)

    Gianna Dondini

    2003-10-01

    Full Text Available Molte specie di pipistrelli delle fasce climatiche temperato-fredde sono soggette a marcate variazioni stagionali di temperatura e disponibilità di cibo. L'accumulo di grasso in autunno è quindi un adattamento per trascorrere, in uno stato di profondo torpore definibile ibernazione, i mesi invernali, aumentando così la probabilità di sopravvivenza durante tale periodo. Nell?ambito di una attività pluriennale relativa alla raccolta, studio e, quando possibile, riabilitazione di pipistrelli in ambienti urbani, due esemplari di <em>Pipistrellus kuhliiem> (2 femmine e due di <em>Hypsugo saviiem> (1 maschio e 1 femmina, in entrambi casi giovani che ancora non avevano acquisito una sufficiente capacità nel volo e quindi non liberabili, sono stati raccolti nella pianura di Firenze durante l?estate del 1998 e mantenuti in condizioni di temperatura ambientale oscillante tra i 17 e i 22°C, in un contenitore di 150x40x30 cm. Ogni sera sono stati pesati, prima della somministrazione di cibo e acqua, con una bilancia elettronica con precisione di 0.1 g (modello Tanita 1479. L'alimentazione è stata a base di vermi della farina (<em>Tenebrio molitorem>. L?efficienza digestiva è calcolata nel seguente modo, su materiale disidratato: (quantità ingerita ? quantità escrementi/quantità ingerita*100. Per il calcolo di tale indice gli esemplari delle due specie sono stati separati e mantenuti per 24 ore a partire dalla successiva sera dell?ultima somministrazione, favorendo così lo svuotamento dell?intestino. Successivamente, per due giorni è stato fornito del cibo <em>ad libitumem>, pesando i singoli esemplari una volta terminata la fase di alimentazione, per determinare la quantità ingerita. Al termine abbiamo mantenuto gli esemplari a digiuno per 24 ore successive all?ultima somministrazione per permettere lo svuotamento dell?intestino. Gli escrementi raccolti sono stati posti in forno elettrico a 90 °C per 24 ore e successivamente pesati

  13. Mycobacteria in water used for personal hygiene in heavy industry and collieries: a potential risk for employees.

    Science.gov (United States)

    Ulmann, Vit; Kracalikova, Anna; Dziedzinska, Radka

    2015-03-04

    Environmental mycobacteria (EM) constitute a health risk, particularly for immunocompromised people. Workers in heavy industry and in collieries represent an at-risk group of people as their immunity is often weakened by long-term employment in dusty environments, frequent smoking and an increased occurrence of pulmonary diseases. This study was concerned with the presence of EM in non-drinking water used for the hygiene of employees in six large industrial companies and collieries. Over a period of ten years, 1096 samples of surface water treated for hygiene purposes (treated surface water) and treated surface water diluted with mining water were examined. EM were detected in 63.4 and 41.5% samples of treated surface water and treated surface water diluted with mining water, respectively. Mycobacterium gordonae, M. avium-intracellulare and M. kansasii were the most frequently detected species. Adoption of suitable precautions should be enforced to reduce the incidence of mycobacteria in shower water and to decrease the infectious pressure on employees belonging to an at-risk group of people.

  14. Mycobacteria in Water Used for Personal Hygiene in Heavy Industry and Collieries: A Potential Risk for Employees

    Directory of Open Access Journals (Sweden)

    Vit Ulmann

    2015-03-01

    Full Text Available Environmental mycobacteria (EM constitute a health risk, particularly for immunocompromised people. Workers in heavy industry and in collieries represent an at-risk group of people as their immunity is often weakened by long-term employment in dusty environments, frequent smoking and an increased occurrence of pulmonary diseases. This study was concerned with the presence of EM in non-drinking water used for the hygiene of employees in six large industrial companies and collieries. Over a period of ten years, 1096 samples of surface water treated for hygiene purposes (treated surface water and treated surface water diluted with mining water were examined. EM were detected in 63.4 and 41.5% samples of treated surface water and treated surface water diluted with mining water, respectively. Mycobacterium gordonae, M. avium-intracellulare and M. kansasii were the most frequently detected species. Adoption of suitable precautions should be enforced to reduce the incidence of mycobacteria in shower water and to decrease the infectious pressure on employees belonging to an at-risk group of people.

  15. Análise comparativa e avaliação de prioridades de competição em três cadeias de suprimentos do setor petroquímico Comparative analysis and competitive priorities assessment in three supply chains from the petrochemical industry

    Directory of Open Access Journals (Sweden)

    Brian Silva

    2012-04-01

    Full Text Available Este artigo analisa comparativamente e avalia qualitativamente prioridades de competição em três cadeias de suprimentos da indústria petroquímica, A, B e C. A pesquisa foi feita no segundo semestre de 2006. O artigo revisa definições sobre cadeias de suprimentos, destacando principalmente a forma de rede que estas podem assumir. A seguir, apresenta os três casos estudados. A pesquisa identificou sete prioridades de competição em petroquímica: qualidade, entrega, flexibilidade, custo, inovação, comunicação e segurança, que foram desdobradas em dimensões. As prioridades foram ponderadas por gestores, com apoio do método multicriterial AHP, chegando-se a uma estrutura de competitividade, que apoiou a avaliação, baseada em julgamento. Ao fim, as diferenças entre as prioridades e os desempenhos julgados formaram uma estrutura de objetivos para as cadeias. A deve priorizar qualidade, B flexibilidade e C redução de custo.The purpose of this article is to comparatively analyze and quantitatively assess the competitive priorities in three supply chains from the petrochemical industry: A, B, and C. The research was carried out in the second half of 2006. The article revises definitions on supply chains with emphasis on network shapes. Then, it presents the three case studies: A, B, and C. The research identifies seven competitive priorities in the petrochemical industry: quality, lead-time, flexibility, cost, innovation, communication and safety, which were unfolded in dimensions. The priorities were analyzed by managers with the support of the AHP multi-criteria method, reaching a competitiveness structure that supported the assessment based on judgment. Finally, the differences betweenthe priorities and the assessed performances formed a structure of objectives for the chains. Results showed that Ashould prioritize quality,B should prioritize flexibility, while C should prioritize cost reduction.

  16. Aprendizagem Tecnológica e Inovação Industrial em Economias Emergentes: uma Breve Contribuição para o Desenho e Implementação de Estudos Empíricos e Estratégias no Brasil

    Directory of Open Access Journals (Sweden)

    Paulo N. Figueiredo

    2004-01-01

    Full Text Available The theme of industrial innovation strategies was formally brought into the government agenda in Brazil during the late-1960s. Since then, there has been a profusion of studies based on descriptions and analysis relative to the design and implementation of industrial innovation strategies. Despite the merit of the existing works in this field in Brazil, there still is a scarcity of both conceptual and, in particular, management approaches to contribute to improving innovation strategies in Brazil. Thus, the focus of this article is centred on two tasks. The first is to clarify some definitions underlying the design and implementation of empirical studies and industrial innovation strategies from the perspective on technological learning in emerging economies. The second is to present some metrics associated with the design and implementation of such strategies and empirical studies, particularly in Brazil. The article seeks to clarify and enlarge the understanding of the intricate process of technological development in the context of emerging economies and, thus, assist researchers and managers involved with industrial innovation management in Brazil.O tema estratégia de inovação industrial entrou formalmente na agenda de discussão e ação governamental no Brasil no final dos anos 1960. Desde então, tem havido uma profusão de estudos baseados em descrições, análises e propostas relativas a estratégias de inovação industrial no País. A despeito do grande mérito dos vários trabalhos neste campo no Brasil, ainda há uma escassez de contribuições conceituais e, principalmente, gerenciais voltadas para o aprimoramento do desenho e da implementação de estudos empíricos e de tais estratégias. Por isso, este artigo tem seu foco em duas tarefas: a primeira é clarificar certas definições relativas ao desenho e implementação de estudos empíricos e de estratégias de inovação industrial a partir da perspectiva de aprendizagem

  17. Threatening “the Good Order”: West Meets East in Cecil B. DeMille’s <em>The Cheatem> and John Updike’s <em>Terrorist>

    Directory of Open Access Journals (Sweden)

    Bradley M. Freeman

    2011-12-01

    Full Text Available

    Despite almost a hundred years of separation, both Cecil B. DeMille’s film <em>The Cheatem> (1915 and John Updike’s novel <em>Terrorist> (2006 deploy a clear-cut territorial divide between Western and Eastern spaces in order to envision a unified American space. These narratives superimpose a “natural” division on these historically opposed spaces and thereby suggest that any contact between these spaces will have dangerous consequences. These consequences include the potential dissolution and eventual destruction of American productivity, surveillance, and territorial integrity. DeMille’s film and Updike’s novel represent America as a nation-state that must be protected from the East. In 1915, <em>The Cheatem> warned against an interracial America and the upsurge in immigration that characterized the turn of the century. Nearly a century later, <em>Terrorist> presupposes an interracial America but still constructs an East that threatens the security of America. While registering the particular concerns of two distinct historical moments, these narratives represent a larger attempt in American aesthetics to imagine an East that jeopardizes the utopian possibilities of an overly idealized American space.

  18. <em>In Vitro em>Phytotoxicity and Antioxidant Activity of Selected Flavonoids

    Directory of Open Access Journals (Sweden)

    Rita Patrizia Aquino

    2012-05-01

    Full Text Available The knowledge of flavonoids involved in plant-plant interactions and their mechanisms of action are poor and, moreover, the structural characteristics required for these biological activities are scarcely known. The objective of this work was to study the possible <em>in vitro em>phytotoxic effects of 27 flavonoids on the germination and early radical growth of <em>Raphanus sativus em>L.> and <em>Lepidium sativumem> L., with the aim to evaluate the possible structure/activity relationship. Moreover, the antioxidant activity of the same compounds was also evaluated. Generally, in response to various tested flavonoids, germination was only slightly affected, whereas significant differences were observed in the activity of the various tested flavonoids against radical elongation. DPPH test confirms the antioxidant activity of luteolin, quercetin, catechol, morin, and catechin. The biological activity recorded is discussed in relation to the structure of compounds and their capability to interact with cell structures and physiology. No correlation was found between phytotoxic and antioxidant activities.

  19. Fungos emboloradores e manchadores de madeira em toras estocadas em indústrias madeireiras no município de Manaus, Amazonas, Brasil Mould and stain fungi in logs stored in wood industries of Manaus, Amazonas, Brazil

    Directory of Open Access Journals (Sweden)

    Rogério Eiji Hanada

    2003-01-01

    Full Text Available Visando conhecer a diversidade e a incidência de fungos emboloradores e manchadores de madeira da região Amazônica, foi realizado um levantamento em 12 espécies florestais, estocadas em quatro indústrias madeireiras de Manaus. De cada espécie florestal selecionaram-se cinco toras, das quais retiraram-se amostras de onde procedeu-se isolamento dos fungos. Foram isolados 106 fungos associados às essências florestais, representados por nove gêneros e por dezesseis espécies. Paecilomyces variotii e Lasiodiplodia theobromae foram as espécies fúngicas mais freqüentemente associadas às espécies florestais. Ceiba pentandra e Hura crepitans foram as essências florestais que apresentaram maior diversidade de fungos, com sete espécies cada uma. Hymeneae courbaril foi a que apresentou menor diversidade de fungo, com apenas uma espécie.In order to know a diversity and incidence of wood mould and wood stain fungi from Amazonian wood, the survey and identification of these kinds of fungi were carried out in twelve wood species from four wood industries of Manaus, Amazonas. Five logs were randomly selected. Wood samples were prepared and transported to the Wood Pathology Laboratory at the Forest Product Research Center of the National Institute for Amazonian Research, where the isolation and identification of the fungi were conducted. One hundred and six fungi associated to the wood species were isolated, represented by nine genera and sixteen fungi species. Paecilomyces variotti and Lasiodiplodia theobromae were the more representative fungi, associated with ten and seven wood species respectively. Ceiba pentandra e Hura crepitans were the wood species with highest diversity of fungi, with seven species each. Hymenae courbaril was the wood that presented the lowest diversity of fungi, with only one fungus.

  20. Repetibilidade de características agroindustriais em cana-de-açúcar Repeatability of agro-industrial characteristics in sugar cane

    Directory of Open Access Journals (Sweden)

    Maria Silvia Monteiro dos Santos

    2004-04-01

    Full Text Available Os objetivos deste trabalho foram estabelecer estimativas de repetibilidade de características agroindustriais em 20 genótipos de cana-de-açúcar, determinar a previsibilidade de cada caráter e indicar a predição do valor verdadeiro de cada clone. O delineamento utilizado foi blocos casualizados, com cinco repetições. Utilizaram-se a análise de variância com dois fatores de variação (cortes e genótipos e a análise dos componentes principais para estimar o coeficiente de repetibilidade , a partir de três cortes. Foram obtidas estimativas de repetibilidade acima de 0,5 para fibra e toneladas de cana por hectare, em ambos os métodos, com confiabilidade maior que 84% pelo método dos componentes principais. As características que ficaram abaixo de 0,5, com previsibilidade inferior a 74%, necessitam de um maior número de avaliações. Os métodos dos componentes principais e análise de variância indicaram, em cinco cortes, uma previsibilidade maior que 80% para fibra, porcentagem de pol (sacarose no caldo da cana, toneladas de cana por hectare e toneladas de pol no caldo da cana por hectare, embora o primeiro tenha sido mais eficiente. Considerando toneladas de cana por hectare e toneladas de pol no caldo da cana por hectare, os clones RB9371, RB9350 e RB9364 são os melhores.The objectives of this work were to establish repeatability estimates for agro-industrial characteristics for twenty genotypes of sugar cane, to indicate the determination coefficient of each character and the prediction of truthful value of each clone. The design consisted of randomized blocks, with five replications. The analysis of variance with two factors of variation (cuts and genotypes and the analysis of the main components were used to estimate the repeatability coefficient , initiating with three cuts. Estimates of repeatability were obtained over 0.5 for fiber and ton of cane per hectare, in both methods, with confidence over 84% by the method of

  1. Desenvolvimento, complexo industrial da saúde e política industrial

    Directory of Open Access Journals (Sweden)

    Gadelha Carlos Augusto Grabois

    2006-01-01

    Full Text Available O artigo situa a questão da saúde no contexto do desenvolvimento nacional e da política industrial. Tomou-se a idéia de corte estruturalista, marxista e schumpeteriano, onde a indústria e as inovações constituem os elementos determinantes do dinamismo das economias capitalistas e de sua posição relativa na economia mundial. Todos os países que se desenvolveram e passaram a competir em melhores condições com os países avançados associaram uma indústria forte com uma base endógena de conhecimento, de aprendizado e de inovação. Todavia, na área da saúde essa visão é problemática, uma vez que os interesses empresariais se movem pela lógica econômica do lucro e não para o atendimento das necessidades da saúde. A noção de complexo industrial da saúde constitui uma tentativa e fornecer um referencial teórico que permita articular duas lógicas distintas: a sanitária e a do desenvolvimento econômico. O trabalho procurou mostrar, com base em dados de comércio exterior, como a desconsideração da lógica do desenvolvimento nas políticas de saúde levou a uma situação de vulnerabilidade econômica do setor que pode limitar os objetivos de universalidade, eqüidade e integralidade. Nesse contexto, propõe-se uma ruptura cognitiva e política com as visões antagônicas que colocam, de um lado, as necessidades da saúde e, de outro, da indústria. Um país que pretende chegar a uma condição de desenvolvimento e de independência requer, ao mesmo tempo, indústrias fortes e inovadoras, e um sistema de saúde inclusivo e universal.

  2. Desenvolvimento, complexo industrial da saúde e política industrial

    Directory of Open Access Journals (Sweden)

    Carlos Augusto Grabois Gadelha

    2006-08-01

    Full Text Available O artigo situa a questão da saúde no contexto do desenvolvimento nacional e da política industrial. Tomou-se a idéia de corte estruturalista, marxista e schumpeteriano, onde a indústria e as inovações constituem os elementos determinantes do dinamismo das economias capitalistas e de sua posição relativa na economia mundial. Todos os países que se desenvolveram e passaram a competir em melhores condições com os países avançados associaram uma indústria forte com uma base endógena de conhecimento, de aprendizado e de inovação. Todavia, na área da saúde essa visão é problemática, uma vez que os interesses empresariais se movem pela lógica econômica do lucro e não para o atendimento das necessidades da saúde. A noção de complexo industrial da saúde constitui uma tentativa e fornecer um referencial teórico que permita articular duas lógicas distintas: a sanitária e a do desenvolvimento econômico. O trabalho procurou mostrar, com base em dados de comércio exterior, como a desconsideração da lógica do desenvolvimento nas políticas de saúde levou a uma situação de vulnerabilidade econômica do setor que pode limitar os objetivos de universalidade, eqüidade e integralidade. Nesse contexto, propõe-se uma ruptura cognitiva e política com as visões antagônicas que colocam, de um lado, as necessidades da saúde e, de outro, da indústria. Um país que pretende chegar a uma condição de desenvolvimento e de independência requer, ao mesmo tempo, indústrias fortes e inovadoras, e um sistema de saúde inclusivo e universal.

  3. Waste Water Disposal Design And Management I

    International Nuclear Information System (INIS)

    Yang, Sang Hyeon; Lee, Jung Su

    2004-04-01

    This book gives descriptions of waste water disposal, design and management, which includes design of waterworks and sewerage facility such as preparatory work and building plan, used waste water disposal facilities, waste water disposal plant and industrial waste water disposal facilities, water use of waste water disposal plant and design of pump and pump facilities such as type and characteristic, selection and plan, screening and grit.

  4. Considerações sobre estudos de ambientes industriais e não industriais no Brasil: uma abordagem comparativa Comments on studies of industrial and non-industrial environments in Brazil: a comparative approach

    Directory of Open Access Journals (Sweden)

    Adriana Gioda

    2003-10-01

    Full Text Available A qualidade do ar em ambientes industriais tem sido palco de estudos desde a segunda metade do século XX. Resultados bem documentados apontaram que a exposição prolongada a poluentes químicos, proveniente do consumo, produção, armazenamento etc., pode causar danos à saúde do trabalhador. Recentemente, estudos direcionados a ambientes não industriais mostraram correlações surpreendentes entre a qualidade do ar e os efeitos causados à saúde. O sistema de ventilação artificial tem sido a principal causa de reclamações e de um alto índice de absenteísmo. Os sintomas relacionados com a qualidade do ar em ambientes não industriais são reconhecidos pela Organização Mundial da Saúde que os identifica como "Síndrome dos Edifícios Doentes". No Brasil, há poucos estudos relacionando qualidade do ar em ambientes fechados e saúde. O presente trabalho pretende mapear as pesquisas já realizadas no País, visando, com isso, incentivar novos estudos nessa área, em virtude de sua importância para a saúde da população.Air quality in industrial environments has been studied since the second half of the 20th century. Well-documented results show that exposure to chemical pollutants through their consumption, production, and storage can damage workers' health. New research focusing on non-industrial environments has shown unexpected correlations between air quality and health effects. Artificial ventilation systems have been related to health-related complaints and a high rate of absenteeism. Symptoms related to air quality in non-industrial environments are recognized by the World Health Organization and encompassed under the so-called sick building syndrome (SBS. In Brazil there are few studies comparing indoor air quality and health. The present study is intended to map the studies already conducted in Brazil in order to encourage further research in this area, due to its importance for public health.

  5. Automóveis autónomos em Portugal: a perspetiva do consumidor numa indústria em mudança

    OpenAIRE

    Júlio, Carlos Filipe Salazar Teixeira

    2017-01-01

    Dissertação de mestrado em Economia Industrial e da Empresa A indústria automóvel encontra-se numa era disruptiva, marcada pela massificação do automóvel e o desenvolvimento de novos produtos para o mercado, nomeadamente o conceito de automóveis autónomos. Estes veículos têm como objetivo automatizar algumas das tarefas dos condutores para que, numa fase final do desenvolvimento da tecnologia, operem sem necessidade de intervenção humana. A introdução desta inovação, torna essencial conhec...

  6. Busca de estruturas em grandes escalas em altos redshifts

    Science.gov (United States)

    Boris, N. V.; Sodré, L., Jr.; Cypriano, E.

    2003-08-01

    A busca por estruturas em grandes escalas (aglomerados de galáxias, por exemplo) é um ativo tópico de pesquisas hoje em dia, pois a detecção de um único aglomerado em altos redshifts pode por vínculos fortes sobre os modelos cosmológicos. Neste projeto estamos fazendo uma busca de estruturas distantes em campos contendo pares de quasares próximos entre si em z Â3 0.9. Os pares de quasares foram extraídos do catálogo de Véron-Cetty & Véron (2001) e estão sendo observados com os telescópios: 2,2m da University of Hawaii (UH), 2,5m do Observatório de Las Campanas e com o GEMINI. Apresentamos aqui a análise preliminar de um par de quasares observado nos filtros i'(7800 Å) e z'(9500 Å) com o GEMINI. A cor (i'-z') mostrou-se útil para detectar objetos "early-type" em redshifts menores que 1.1. No estudo do par 131046+0006/J131055+0008, com redshift ~ 0.9, o uso deste método possibilitou a detecção de sete objetos candidatos a galáxias "early-type". Num mapa da distribuição projetada dos objetos para 22 escala. Um outro argumento em favor dessa hipótese é que eles obedecem uma relação do tipo Kormendy (raio equivalente X brilho superficial dentro desse raio), como a apresentada pelas galáxias elípticas em z = 0.

  7. Encapsulation-Induced Stress Helps <em>Saccharomyces cerevisiae em>Resist Convertible Lignocellulose Derived Inhibitors

    Directory of Open Access Journals (Sweden)

    Johan O. Westman

    2012-09-01

    Full Text Available The ability of macroencapsulated <em>Saccharomyces cerevisiae em>CBS8066<em> em>to withstand readily and not readily <em>in situem> convertible lignocellulose-derived inhibitors was investigated in anaerobic batch cultivations. It was shown that encapsulation increased the tolerance against readily convertible furan aldehyde inhibitors and to dilute acid spruce hydrolysate, but not to organic acid inhibitors that cannot be metabolized anaerobically. Gene expression analysis showed that the protective effect arising from the encapsulation is evident also on the transcriptome level, as the expression of the stress-related genes <em>YAP1em>, <em>ATR1em> and <em>FLR1em> was induced upon encapsulation. The transcript levels were increased due to encapsulation already in the medium without added inhibitors, indicating that the cells sensed low stress level arising from the encapsulation itself. We present a model, where the stress response is induced by nutrient limitation, that this helps the cells to cope with the increased stress added by a toxic medium, and that superficial cells in the capsules degrade convertible inhibitors, alleviating the inhibition for the cells deeper in the capsule.

  8. Fiber Bragg grating sensors in harsh environments: considerations and industrial monitoring applications

    Science.gov (United States)

    Méndez, Alexis

    2017-06-01

    Over the last few years, fiber optic sensors (FOS) have seen an increased acceptance and widespread use in industrial sensing and in structural monitoring in civil, aerospace, marine, oil & gas, composites and other applications. One of the most prevalent types in use today are fiber Bragg grating (FBG) sensors. Historically, FOS have been an attractive solution because of their EM immunity and suitability for use in harsh environments and rugged applications with extreme temperatures, radiation exposure, EM fields, high voltages, water contact, flammable atmospheres, or other hazards. FBG sensors have demonstrated that can operate reliably in many different harsh environment applications but proper type and fabrication process are needed, along with suitable packaging and installation procedure. In this paper, we review the impact that external factors and environmental conditions play on FBG's performance and reliability, and describe the appropriate sensor types and protection requirements suitable for a variety of harsh environment applications in industrial furnaces, cryogenic coolers, nuclear plants, maritime vessels, oil & gas wells, aerospace crafts, automobiles, and others.

  9. Morphological identification of the Soprano Pipistrelle (<em>Pipistrellus pygmaeusem> Leach, 1825 in Croatia.

    Directory of Open Access Journals (Sweden)

    Igor Pavlinić

    2008-07-01

    Full Text Available Abstract After the discovery of two different phonic types within the common pipistrelle (<em>Pipistrellus pipistrellusem>, mtDNA analysis confirmed the existence of two separate species named as common pipistrelle (<em>P. pipistrellusem> and soprano pipistrelle (<em>P. pygmaeusem>. The discrimination of these two cryptic species using external characters and measures has proved to be somewhat problematic. We examined two colonies of soprano pipistrelle from Donji Miholjac, Croatia. As a result, only two characters proved to be of help for field identification: wing venation (89% of cases and penis morphology and colour for males. The difference in length between the 2nd and 3rd phalanxes of the 3rd finger should be discarded as diagnostic trait between <em>P. pipistrellusem> and <em>P. pygmaeusem> in Croatia. Riassunto Identificazione su basi morfologiche del pipistrello pigmeo (<em>Pipistrellus pygmeausem>, Leach, 1825 in Croazia. A seguito della descrizione di due differenti "tipi fonici" nel pipistrello nano (<em>Pipistrellus pipistrellusem> e della successiva conferma su basi genetiche dell'esistenza di due specie distinte, designate come pipistrello nano (<em>P. pipistrellusem> e pipistrello pigmeo (<em>P. pygmaeusem>, la distinzione delle due specie in base a caratteristiche morfologiche esterne si è dimostrata un problema di difficile soluzione. Sulla base delle caratteristiche distintive e delle differenze biometriche proposte da altri Autori, sono state esaminate due colonie di pipistrello pigmeo a Donji Miholjac, in Croazia. I risultati ottenuti evidenziano che, tra tutti i potenziali caratteri sinora proposti, solo due risultano utili per un'identificazione diretta sul campo: la venatura delle ali, risultata utile alla discriminazione nell'89% degli esemplari analizzati, e la colorazione e morfologia del pene nei maschi. La

  10. Utilização agrícola de lodo industrial como fonte de zinco na cultura do crisântemo Agricultural use of industrial sludge as a source of Zn for chrysanthemum cultivation

    Directory of Open Access Journals (Sweden)

    Luciano F. Lopes

    2004-09-01

    Full Text Available A utilização de lodo industrial inorgânico em substratos comerciais ou como fonte de nutrientes, é prática bem recente. O lodo produzido pela indústria de galvanoplastia-zincagem apresenta elevados teores de nutrientes como Zn, Fe, e Ca que, dependendo das doses utilizadas em solos e substratos, podem causar toxidez às plantas. No presente experimento foi utilizado um substrato comercial onde foram adicionadas doses crescentes do lodo industrial de galvanoplastia-zincagem para o cultivo de crisântemo, variedade Rage, em cultivo protegido. As doses do lodo industrial utilizadas foram de 0,0; 0,38; 0,75; 1,50; 3,0; 6,0; 9,0 e 12,0 g L-1 de substrato. Após 12 semanas de cultivo foram avaliadas as seguintes variáveis: pH e condutividade elétrica do substrato, teor de Zn na parte aérea da planta e no substrato, altura da planta (ALT, massa seca da parte aérea (MSPA, massa seca das inflorescências (MSF e massa seca do sistema radicular (MSR. A adição do lodo industrial no substrato, na dose de 0,38 g L-1, promoveu um pequeno incremento de ALT, MSPA e MSR. Este comportamento indica que o lodo industrial pode fornecer nutrientes à cultura. Nas doses superiores a 3 g L-1 ocorreu acentuada queda da produção devido ao desbalanço nutricional associado à fitotoxidez de Zn e elevada condutividade elétrica do substrato.The use of inorganic industrial sludge as a source of nutrients in growing media is a recent practice. The sludge produced by the zinc-galvanic industry has a high concentration of plant nutrients such as Zn, Fe and Ca that, depending on the doses used in soils and growing media, could be toxic to the plants. In the present experiment a commercial organic substrate was used by adding increasing doses of an industrial sludge produced by a zinc-galvanic industry. Doses of industrial sludge (0.0; 0.38; 0.75; 1.50; 3.0; 6.0; 9.0 and 12.0 g L-1 of the growing media were applied to the chrysanthemum cv. Rage, cultivated in a

  11. Altitudinal distribution of the common longeared bat <em>Plecotus auritusem> (Linnaeus, 1758 and grey long-eared bat <em>Plecotus austriacusem> (J. B. Fischer, 1829 (Chiroptera, Vespertilionidae in the Tatra mountains (southern Poland

    Directory of Open Access Journals (Sweden)

    Krzysztof Piksa

    2006-03-01

    Full Text Available Riassunto Distribuzione altitudinale di Orecchione bruno (<em>Plecotus auritusem> e Orecchione meridionale (<em>Plecotus austriacusem> nei Monti Tatra (Polonia meridionale. Vengono riportati nuovi dati relativi alla distribuzione altitudinale nei Monti Tatra (Polonia meridionale di <em>Plecotus auritusem> e <em>P. austriacusem>. Tali segnalazioni incrementano le conoscenze relative alla presenza di questi chirotteri a quote elevate, in particolare per la Polonia. In inverno <em>P. auritusem> è stato rinvenuto a 1921 m s.l.m. mentre in estate è stato rinvenuto a 2250 m s.l.m.; in aggiunta, sono stati ritrovati resti ossei a 1929 m s.l.m. <em>P. austriacusem> è stato segnalato in ibernazione a 1294 m s.l.m.

  12. Action of Chitosan Against <em>Xanthomonas> Pathogenic Bacteria Isolated from <em>Euphorbia pulcherrimaem>

    Directory of Open Access Journals (Sweden)

    Yanli Wang

    2012-06-01

    Full Text Available The antibacterial activity and mechanism of two kinds of chitosan were investigated against twelve <em>Xanthomonas> strains recovered from <em>Euphorbia pulcherrimaem>. Results indicated that both chitosans markedly inhibited bacterial growth based on OD loss. Furthermore, the release of DNA and RNA from three selected strains was increased by both chitosans. However, the release of intracellular proteins was inhibited by both chitosans at different concentration and incubation times, except chitosan A at 0.1 mg/mL for 0.5 h incubation and 0.2 mg/mL for 2.0 h incubation increased the release of proteins, indicating the complexity of the interaction and cell membranes, which was affected by incubation time, bacterial species, chitosan type and concentration. Transmission electron microscopic observations revealed that chitosan caused changes in protoplast concentration and surface morphology. In some cells, the membranes and walls were badly distorted and disrupted, while other cells were enveloped by a thick and compact ribbon-like layer. The contrary influence on cell morphology may explain the differential effect in the release of material. In addition, scanning electron microscope and biofilm formation test revealed that both chitosans removed biofilm biomass. Overall, this study showed that membrane and biofilm play an important role in the antibacterial mechanism of chitosan.

  13. Study of the <em>in Vitroem> Antiplasmodial, Antileishmanial and Antitrypanosomal Activities of Medicinal Plants from Saudi Arabia

    Directory of Open Access Journals (Sweden)

    Nawal M. Al-Musayeib

    2012-09-01

    Full Text Available The present study investigated the <em>in vitroem> antiprotozoal activity of sixteen selected medicinal plants. Plant materials were extracted with methanol and screened <em>in vitroem> against erythrocytic schizonts of <em>Plasmodium falciparumem>, intracellular amastigotes of <em>Leishmania infantum em>and <em>Trypanosoma cruzi em>and free trypomastigotes of<em> T. bruceiem>. Cytotoxic activity was determined against MRC-5 cells to assess selectivity<em>. em>The criterion for activity was an IC50 < 10 µg/mL (4. Antiplasmodial activity was found in the<em> em>extracts of<em> em>>Prosopis julifloraem> and <em>Punica granatumem>. Antileishmanial activity<em> em>against <em>L. infantumem> was demonstrated in <em>Caralluma sinaicaem> and <em>Periploca aphylla.em> Amastigotes of<em> T. cruzi em>were affected by the methanol extract of<em> em>>Albizia lebbeckem>> em>pericarp, <em>Caralluma sinaicaem>,> Periploca aphylla em>and <em>Prosopius julifloraem>. Activity against<em> T. brucei em>was obtained in<em> em>>Prosopis julifloraem>. Cytotoxicity (MRC-5 IC50 < 10 µg/mL and hence non-specific activities were observed for<em> em>>Conocarpus lancifoliusem>.>

  14. Práticas de gestão no desenvolvimento de produtos em empresas de autopeças Management practices in product development in autoparts industry

    Directory of Open Access Journals (Sweden)

    José Carlos de Toledo

    2008-01-01

    , além de técnicas de simulação do produto em desenvolvimento; e é esperado que as unidades locais consigam mais autonomia em relação às matrizes, particularmente para condução das atividades que possuem competência para participar mais efetivamente de desenvolvimentos conjuntos com as montadoras e/ou sistemistas, seja para fornecimento local ou mais global.This paper presents the empirical findings of survey on practices and management trends of product development process management in the Brazilian auto-parts industry. Thirty two companies, from 120 companies which carry out product development activities, answered the questionnaire, each of theses 32 companies was visited and the interviews were conduced with the managers of PDP, by members of the group of researchers. The final sample consisted of 23 responses since 9 questionnaires were incomplete. Some of the main findings on the practices are: widespread dissemination and use of reference models for PDP partially implemented; methods and techniques for PDP Management are applied with weak inter functional integration; development team carries out the PDP activities; functional structure is still widely used; the follow-source projects are the most common type, while platform projects were also identified (average of 25% of carry out projects; and the first tier suppliers are the ones that more use practices of international pattern of PDP management. Regarding the trends, the reduction of the innovation cycle will require more resources to increase product development speed, and local units expect to reach more autonomy in product development activities which they are capable in order to take part effectively of co-development with the automakers.

  15. <em>Trichoderma harzianumem> como promotor del crecimiento vegetal del maracuyá (<em>Passiflora edulisem> var. <em>flavicarpa> Degener

    Directory of Open Access Journals (Sweden)

    Cubillos-Hinojosa Juan

    2009-04-01

    Full Text Available

    Se realizó un experimento en condiciones de laboratorio e invernadero, con el propósito de evaluar el efecto de la cepa nativa TCN-014 y la cepa comercial TCC-005 de <em>Trichoderma harzianumem> sobre la germinación y el crecimiento temprano del maracuyá. Se adecuaron inóculos de 104, 106 y 108 conidias/mL para cada cepa y se aplicaron a semillas de maracuyá; se evaluó el número de semillas germinadas durante 15 días; se calculó el porcentaje de germinación, el índice de velocidad de germinación y el tiempo medio de germinación. Posteriormente las semillas germinadas se llevaron a condiciones de invernadero y transcurridos dos meses se midió la altura de las plántulas, el grosor del tallo, el número de hojas, la longitud de la raíz y el peso seco total. Todos los tratamientos estimularon la germinación de las semillas y el desarrollo de las plántulas; sin embargo la cepa nativa en concentraciones 106 y 108 conidias/mL mostró resultados superiores frente a la cepa comercial. Los resultados sugieren una acción efectiva de <em>T. harzianumem> como promotor de crecimiento vegetal, mostrando que tiene potencial para la elaboración de un bioproducto útil para el manejo ecológico del cultivo de maracuyá.

  16. Formulação estratégica da manutenção industrial com base na confiabilidade dos equipamentos Strategic formulation of industrial maintenance supported by equipment's reliability

    Directory of Open Access Journals (Sweden)

    Miguel Afonso Sellitto

    2005-04-01

    Full Text Available Este trabalho relata o uso da confiabilidade e da manutenibilidade na formulação de estratégias de manutenção industrial. O método utilizado foi o estudo de dois casos. Inicia-se revisando conceitos ligados a variáveis e processos aleatórios como base para definir conceitos e características de estudos de confiabilidade e de modelagem aplicados na gestão da manutenção industrial. A seguir se descrevem os casos estudados, em que se aplicam técnicas de modelagem de tempos até a falha e até o reparo no estabelecimento de estratégias de manutenção em fábricas do setor metal-mecânico. Com base nos resultados, discute-se o caso, estabelecendo condições para o uso da confiabilidade na formulação estratégica da manutenção, principalmente quanto ao sistema de informações necessárias.This paper reports the use of reliability and maintainability assessments in the strategic formulation of industrial maintenance. The method was a double case study. The paper begins by a theoretical review of related concepts of stochastic variables and processes as a basis to address concepts and features from reliability studies and modeling, suited to use in managing the industrial maintenance. One then describes the two studied cases, in which the reliability techniques were applied, in modeling the times to failure and times to the repair for the sake of settling the strategic formulation of industrial maintenance in metal-mechanic plants. Supported by results, this paper discusses the cases, arising requirements to the use of the reliability, mainly related to the information system.

  17. O perfil Brasileiro de propriedade intelectual em radiologia e diagnóstico por imagem em um contexto internacional, nos anos 2000-2009

    Directory of Open Access Journals (Sweden)

    Paulo Roberto Barbosa Serapião

    2011-08-01

    Full Text Available OBJETIVO: Analisar a inovação tecnológica brasileira na área de radiologia e diagnóstico por imagem, em termos de indicadores de patentes. MATERIAIS E MÉTODOS: Este é um estudo analítico-exploratório de informações recuperadas por meio de consultas cruzadas nas bases de dados dos escritórios de propriedade intelectual do Brasil (Instituto Nacional da Propriedade Industrial - INPI, dos Estados Unidos (United States Patent and Trademark Office - USPTO e da Europa (European Patent Office - EPO. RESULTADOS: Foram encontradas 277.057 patentes. Desse total, 7.800 foram registradas no INPI (3%, 65.428 (24% registradas no EPO e 203.829 (73% emitidas no USPTO. O Brasil é o país signatário em 1.732 patentes publicadas no INPI, 80 no EPO e 26 no escritório USPTO. Globalmente, 219.993 (79% patentes referiam-se a dispositivos eletrônicos ligados a informática em saúde, ultrassonografia, ressonância magnética, tomografia computadorizada e procedimentos de geração, comunicação e arquivamento de imagens, e 57.064 (21% das patentes tratavam das tecnologias relacionadas a radioproteção e dosimetria, física nuclear, eletroterapia, terapia magnética e radioterapia. CONCLUSÃO: Os resultados obtidos apontam para a fragilidade da produção nacional de inovação tecnológica registrada em patentes, no campo de radiologia e diagnóstico por Imagem.

  18. MODELAGEM SISTÊMICA DE PROJETOS DE AEC EM UML

    Directory of Open Access Journals (Sweden)

    Rita Cristina Ferreira

    2007-11-01

    Full Text Available O uso intensivo de Sistemas de Informação é uma possível solução para a integração das atividades de projeto em AEC, permitindo que decisões sejam tomadas ainda na fase de projeto e, conseqüentemente, evitando-se retrabalhos em obra. Neste sentido, esforços têm sido realizados para padronizar conceitos e terminologias de AEC, permitindo a troca e armazenagem de informações, como a norma ISO 12006-2 e os padrões estabelecidos pelo IFC. Ambas são baseadas na linguagem EXPRESS, assim como é o padrão industrial STEP. Entretanto, as representações de informação usadas na indústria de produtos não são as mais adequadas para a Engenharia de Software, responsável pelo desenvolvimento de Sistemas de Informação, onde as representações semânticas envolvem não somente a representação estrutural da informação, mas também a representação comportamental. Este artigo contribui com uma visão de implementação em UML da informação de um projeto de AEC e tornam explícitas, sob a ótica do desenvolvimento de software, as relações semânticas existentes. Os resultados desta pesquisa foram obtidos através da realização de um estudo de caso de projeto de produção em CAD 3D dos subsistemas alvenaria e revestimento para um edifício residencial. A partir das observações do estudo de caso foi feita a modelagem em UML dos objetos pertinentes. O principal resultado obtido foi a representação explícita das interfaces entre objetos AEC.

  19. Effect of β,β-Dimethylacrylshikonin on Inhibition of Human Colorectal Cancer Cell Growth <em>in Vitro em>and <em>in Vivoem>

    Directory of Open Access Journals (Sweden)

    Ting Feng

    2012-07-01

    Full Text Available In traditional Chinese medicine, shikonin and its derivatives, has been used in East Asia for several years for the prevention and treatment of several diseases, including cancer. We previously identified that β,β-dimethylacrylshikonin (DA could inhibit hepatocellular carcinoma growth. In the present study, we investigated the inhibitory effects of DA on human colorectal cancer (CRC cell line HCT-116 <em>in vitroem> and <em>in vivoem>. A viability assay showed that DA could inhibit tumor cell growth in a time- and dose-dependent manner. Flow cytometry showed that DA blocks the cell cycle at G0/G1 phase. Western blotting results demonstrated that the induction of apoptosis by DA correlated with the induction of pro-apoptotic proteins Bax, and Bid, and a decrease in the expression of anti-apoptotic proteins Bcl-2 and Bcl-xl. Furthermore, treatment of HCT-116 bearing nude mice with DA significantly retarded the growth of xenografts. Consistent with the results <em>in vitroem>, the DA-mediated suppression of HCT-116 xenografts correlated with Bax and Bcl-2. Taken together, these results suggest that DA could be a novel and promising approach to the treatment of CRC.

  20. Enrichment and Purification of Syringin, Eleutheroside E and Isofraxidin from <em>Acanthopanax> <em>senticosus> by Macroporous Resin

    Directory of Open Access Journals (Sweden)

    Yuangang Zu

    2012-07-01

    Full Text Available In order to screen a suitable resin for the preparative simultaneous separation and purification of syringin, eleutheroside E and isofraxidin from <em>Acanthopanax> <em>senticosus>, the adsorption and desorption properties of 17 widely used commercial macroporous resins were evaluated. According to our results, HPD100C, which adsorbs by the molecular tiers model, was the best macroporous resin, offering higher adsorption and desorption capacities and higher adsorption speed for syringin, eleutheroside E and isofraxidin than other resins. Dynamic adsorption and desorption tests were carried out to optimize the process parameters. The optimal conditions were as follows: for adsorption, processing volume: 24 BV, flow rate: 2 BV/h; for desorption, ethanol–water solution: 60:40 (v/v, eluent volume: 4 BV, flow rate: 3 BV/h. Under the above conditions, the contents of syringin, eleutheroside E and isofraxidin increased 174-fold, 20-fold and 5-fold and their recoveries were 80.93%, 93.97% and 93.79%, respectively.

  1. O problema de corte de estoque em indústrias de móveis de pequeno e médio portes

    Directory of Open Access Journals (Sweden)

    Socorro Rangel

    2008-12-01

    Full Text Available A geração de padrões de corte para cortar painéis retangulares de madeira em itens retangulares menores é uma tarefa rotineira em indústrias de móveis. Além do objetivo usual de minimizar perdas, as indústrias procuram gerar padrões de corte que facilitem o processo de corte. Neste trabalho analisamos os padrões de corte adotados por uma fábrica característica do Pólo Moveleiro de Votuporanga-SP. Propomos uma heurística para a geração de um conjunto de padrões de corte baseados em padrões n-grupos e usamos na solução do problema de corte de estoque. Comparamos a solução do método heurístico com a solução obtida através do método em 2-estágios de Gilmore e Gomory e a prática da fábrica. Os resultados obtidos indicam que a heurística proposta é capaz de gerar padrões de corte similares aos utilizados pela fábrica, com índices de perda iguais ou melhores.Defining cutting patterns to cut rectangular plates to produce smaller rectangular pieces with specified sizes and demands is an every day task in the furniture industry. Besides the usual interest in cutting patterns that minimizes waste, there is also interest in developing cutting patterns that allows a rapid manipulation of the plates. In this work we analyze the cutting patterns used in a furniture industry situated at the state of São Paulo-Brazil and present a heuristic procedure to generate cutting patterns based on n-group guillotine pattern. We compare the heuristic solution with the solution given by the traditional 2-stage Gilmore-Gomory method and the industry practice. The results indicate that the proposed heuristic can generate cutting patterns similar to the ones used in the industry with waste index that are equal or better.

  2. Training for Defense? From Stochastic Traits to Synchrony in Giant Honey Bees (<em>Apis dorsataem>

    Directory of Open Access Journals (Sweden)

    Gerald Kastberger

    2012-08-01

    Full Text Available In Giant Honey Bees, abdomen flipping happens in a variety of contexts. It can be either synchronous or cascaded, such as in the collective defense traits of shimmering and rearing-up, or it can happen as single-agent behavior. Abdomen flipping is also involved in flickering behavior, which occurs regularly under quiescent colony state displaying singular or collective traits, with stochastic, and (semi- synchronized properties. It presumably acts via visual, mechanoceptive, and pheromonal pathways and its goals are still unknown. This study questions whether flickering is preliminary to shimmering which is subject of the <em>fs em>(flickering-shimmering-transition> hypothesis? We tested the respective prediction that trigger sites (<em>ts> at the nest surface (where shimmering waves had been generated show higher flickering activity than the alternative non-trigger sites (<em>nts>. We measured the flickering activity of <em>ts>- and <em>nts>-surface bees from two experimental nests, before and after the colony had been aroused by a dummy wasp. Arousal increased rate and intensity of the flickering activity of both <em>ts>- and <em>nts> cohorts (P < 0.05, whereby the flickering intensity of <em>ts>-bees were higher than that of <em>nts>-bees (P < 0.05. Under arousal, the colonies also increased the number of flickering-active <em>ts>- and <em>nts>-cohorts (P < 0.05. This provides evidence that cohorts which are specialist at launching shimmering waves are found across the quiescent nest zone. It also proves that arousal may reinforce the responsiveness of quiescent curtain bees for participating in shimmering, practically by recruiting additional trigger site bees for expanding repetition of rate and intensity of shimmering waves. This finding confirms the <em>fs-transition> hypothesis and constitutes evidence that flickering is part of a basal colony-intrinsic information system

  3. Silicone líquido industrial para transformar o corpo: prevalência e fatores associados ao seu uso entre travestis e mulheres transexuais em São Paulo, Brasil

    Directory of Open Access Journals (Sweden)

    Thiago Pestana Pinto

    Full Text Available O objetivo deste trabalho foi estimar a prevalência do uso de silicone líquido industrial (SLI entre pessoas travestis e mulheres transexuais e identificar os fatores relacionados a esta prática. Trata-se de estudo transversal realizado em sete municípios do Estado de São Paulo, Brasil, com dados coletados entre 2014 e 2015, em uma amostra de 576 pessoas. Na análise dos fatores associados, utilizamos o modelo de Poisson com variância robusta para estimar as razões de prevalências bruta e ajustada. A prevalência do uso de SLI foi de 49%, a média de idade para a primeira colocação de SLI foi de 22 (± 5,3 anos e aproximadamente 43% informaram a ocorrência de problemas de saúde decorrente do uso. No modelo múltiplo ter escolaridade menor que o nível superior, estar em faixa etária a partir dos 20 anos, identificar-se como travesti e exercer a prostituição foram associados positivamente com a utilização de SLI. Houve uma elevada prevalência do uso de SLI e de problemas decorrentes desta prática, indicando um desafio acerca da prevenção do uso e da redução dos danos à saúde provocados pelo SLI. Dessa forma, torna-se fundamental assegurar o acesso aos recursos necessários para a realização das modificações corporais ao longo do percurso de transição por meio de uma atenção integral à saúde das pessoas travestis e transexuais no Sistema Único de Saúde. Finalmente, incluir nas políticas de saúde as demandas por modificações corporais como parte da construção da identidade de gênero, respeitando as necessidades singulares de cada pessoa neste processo de transição.

  4. Complete BWR--EM LOCA analysis using the WRAP--EM system

    International Nuclear Information System (INIS)

    Beckmeyer, R.R.; Gregory, M.V.; Buckner, M.R.

    1979-01-01

    The Water Reactor Analysis Package, Evaluation Model (WRAP--EM), provides a complete analysis of postulated loss-of-coolant accidents (LOCA's) in light--water nuclear power reactors. The system is being developed at the Savannah River Laboratory (SRL) for use by the Nuclear Regulatory Commission (NRC) to interpret and evaluate reactor vendor, evaluation model (EM) analyses. The initial version of the WRAP--EM system for analysis of boiling water reactors (BWR's) is operational. To demonstrate the complete capability of the WRAP--BWR--EM system, a LOCA analysis has been performed for the Hope Creek Plant

  5. The Ssr protein (T1E_1405) from Pseudomonas putida DOT-T1E enables oligonucleotide-based recombineering in platform strain P. putida EM42

    DEFF Research Database (Denmark)

    Aparicio, Tomás; Ingemann Jensen, Sheila; Nielsen, Alex Toftgaard

    2016-01-01

    Some strains of the soil bacterium Pseudomonas putida have become in recent years platforms of choice for hosting biotransformations of industrial interest. Despite availability of many genetic tools for this microorganism, genomic editing of the cell factory P. putida EM42 (a derivative of refer......Some strains of the soil bacterium Pseudomonas putida have become in recent years platforms of choice for hosting biotransformations of industrial interest. Despite availability of many genetic tools for this microorganism, genomic editing of the cell factory P. putida EM42 (a derivative...

  6. Barriers to green supply chain management in Indian mining industries

    DEFF Research Database (Denmark)

    Muduli, K.; Govindan, Kannan; Barve, A.

    2013-01-01

    industries are increasingly implementing environmental management systems (EMS), cleaner production (CP), and adopting green supply chain management (GSCM) practices. GSCM focuses on a reduction of the adverse impacts of supply chain activities as well as a minimization of energy and material usage......A country's mining industry, despite its significant contributions to the country's economic growth, generally has a very poor public image because it is considered as a major environmental polluter. To acquire an improved social image, as well as to comply with government regulations, mining...... strength of the barriers will help decision makers rank them and decide a course of action that will make an optimum utilization of available resources during times of resource scarcity....

  7. Supercritical Fluid Extraction of <em>Eucalyptus globulusem> Bark—A Promising Approach for Triterpenoid Production<em>>

    Directory of Open Access Journals (Sweden)

    Carlos M. Silva

    2012-06-01

    Full Text Available Eucalyptus bark contains significant amounts of triterpenoids with demonstrated bioactivity, namely triterpenic acids and their acetyl derivatives (ursolic, betulinic, oleanolic, betulonic, 3-acetylursolic, and 3-acetyloleanolic acids. In this work, the supercritical fluid extraction (SFE of <em>Eucalyptus> <em>globulus> deciduous bark was carried out with pure and modified carbon dioxide to recover this fraction, and the results were compared with those obtained by Soxhlet extraction with dichloromethane. The effects of pressure (100–200 bar, co-solvent (ethanol content (0, 5 and 8% wt, and multistep operation were studied in order to evaluate the applicability of SFE for their selective and efficient production. The individual extraction curves of the main families of compounds were measured, and the extracts analyzed by GC-MS. Results pointed out the influence of pressure and the important role played by the co-solvent. Ethanol can be used with advantage, since its effect is more important than increasing pressure by several tens of bar. At 160 bar and 40 °C, the introduction of 8% (wt of ethanol greatly improves the yield of triterpenoids more than threefold.

  8. <em>Helicobacter pyloriem> Disrupts Host Cell Membranes, Initiating a Repair Response and Cell Proliferation

    Directory of Open Access Journals (Sweden)

    Hsueh-Fen Juan

    2012-08-01

    Full Text Available <em>Helicobacter pyloriem> (<em>H. pyloriem>, the human stomach pathogen, lives on the inner surface of the stomach and causes chronic gastritis, peptic ulcer, and gastric cancer. Plasma membrane repair response is a matter of life and death for human cells against physical and biological damage. We here test the hypothesis that <em>H. pyloriem> also causes plasma membrane disruption injury, and that not only a membrane repair response but also a cell proliferation response are thereby activated. Vacuolating cytotoxin A (VacA and cytotoxin-associated gene A (CagA have been considered to be major <em>H. pyloriem> virulence factors. Gastric cancer cells were infected with <em>H. pyloriem> wild type (vacA+/cagA+, single mutant (ΔvacA or ΔcagA or double mutant (ΔvacA/ΔcagA strains and plasma membrane disruption events and consequent activation of membrane repair components monitored. <em>H. pyloriem> disrupts the host cell plasma membrane, allowing localized dye and extracellular Ca2+ influx. Ca2+-triggered members of the annexin family, A1 and A4, translocate, in response to injury, to the plasma membrane, and cell surface expression of an exocytotic maker of repair, LAMP-2, increases. Additional forms of plasma membrane disruption, unrelated to <em>H.> pylori em>exposure, also promote host cell proliferation. We propose that <em>H. pyloriem> activation of a plasma membrane repair is pro-proliferative. This study might therefore provide new insight into potential mechanisms of <em>H. pyloriem>-induced gastric carcinogenesis.

  9. Perspiration and Inspiration

    DEFF Research Database (Denmark)

    Mooradian, Todd; Matzler, Kurt; Uzelac, Borislav

    2016-01-01

    as a predictor of success in areas such as education, military training, and income. We report a study with a sample of Austrian entrepreneurs relating Grit as well as firm-level Innovativeness to entrepreneurial success. We show that both Grit and Innovativeness predict success; Grit affects success directly...

  10. Projeto e desenvolvimento de uma interface de rede local para aplicações em automação industrial

    OpenAIRE

    Leonardo Appezato

    1990-01-01

    Resumo: Esta dissertação apresenta o projeto de uma interface de rede local, desenvolvida no Instituto de Automação do Centro Tecnológico para Informática. Este projeto tem uma proposta de implementação de hardware e software objetivando sua utilização em aplicações industriais. O projeto constitue-se em uma placa inteligente onde se localizam as duas camadas inferiores do Modelo de Referência OSI da ISO, implementadas de uma forma similar à especificação Mini-MAP. A subcamada MAC é do tipo "...

  11. Are EMS environmentally effective? The link between environmental management systems and environmental performance in European companies

    NARCIS (Netherlands)

    Hertin, J.; Berkhout, F.G.H.; Wagner, M.; Tyteca, D.

    2008-01-01

    Based on the analysis of a large dataset on the environmental performance of European companies in five industrial sectors, this paper examines the question of whether the presence of an environmental management system (EMS) has a positive impact on the eco-efficiency of companies. It begins with a

  12. NATURE AND LAW IN THE <em>INSTITUTAS> OF GAIO NATUREZA E DIREITO NAS <em>INSTITUTAS> DE GAIO

    Directory of Open Access Journals (Sweden)

    Alfredo Carlos Storck

    2011-09-01

    Full Text Available

    In a very famous passage of his <em>Institutes>, the ancient jurist Gaius had divided the Roman Private Law in two parts: the Civil Law and the Law of People. The former is the Law created by the Roman people, whereas the latter is the Law followed by every nation.

    Despite its classical origin, there is some disagreement among specialists about the right way to interpret this distinction. By the beginning of the 20th century, historians like Michel Villey had seen in this distinction the influence of Greek philosophy (Stoic but even Aristotelian among the Roman jurists. But Levy and more recently Kelly have challenged this view and proposed that, in the roman period, philosophers and jurists had completely distinct notions of nature and natural law. The aim of this paper is not to prove the exact influence of Greek philosophy among jurists, but only to suggest that it is not possible to give an interpretation of the classical texts without ascribing to them a theoretical notion of the natural law.

    Em uma famosa passagem de suas <em>Institutas>, o jurista romano Gaio dividiu o direito privado em duas partes: o direito civil e o direito dos povos. O primeiro é o direito criado pelo povo romano enquanto o segundo é o direito seguido por todas as nações. A despeito de sua origem clássica, os especialistas discordam acerca do modo de interpretar essa tese. No início do século XX, historiadores como Michel Villey viram na distinção sinais da influência da filosofia grega (estóica e mesmo aristotélica entre os juristas romanos. Posteriormente Levy e mais recentemente Kelly contestaram essa afirmação e defenderam que filósofos e juristas possuíam, no período clássico, noções de natureza e direito natural completamente distintas. O objetivo desse artigo não está em provar a exata influência da filosofia grega entre os juristas, mas apenas em sugerir que não é possível fornecer uma interpretação dos

  13. Descontinuidades produtivas e tecnológicas na estrutura industrial da economia brasileira

    Directory of Open Access Journals (Sweden)

    Rosembergue Valverde

    Full Text Available Resumo O objetivo deste artigo é avaliar a capacidade da economia brasileira de sustentar taxas de crescimento em longo prazo, considerando as complementaridades técnicas intersetoriais como vetor de absorção e difusão tecnológicas na estrutura industrial. Para realizar essa tarefa, recorre-se às teorias neo-schumpeteriana, que descrevem os processos de absorção e difusão tecnológicas e à construção de um modelo de crescimento multissetorial de inspiração neorricardiana do tipo Sraffa-Von Neumann. Em acordo com os procedimentos metodológicos adotados, identificam-se descontinuidades produtivas, características de estrangulamentos da produção, que comprometem as condições de crescimento de longo prazo e os processos de absorção e difusão tecnológicas da economia brasileira. Em conclusão, destaca-se a existência de pontos de estrangulamentos de produção em setores com elevado grau de basicidade, fundamentais para a reprodução da estrutura produtiva da economia brasileira.

  14. Local feeding specialization of the red fox (<em>Vulpes vulpesem> in response to eastern cottontail (<em>Sylvilagus floridanusem> introduction (NW Italy

    Directory of Open Access Journals (Sweden)

    Alessandro Balestrieri

    2006-03-01

    Full Text Available Abstract To appreciate the influence of the introduction of the Eastern cottontail (<em>Sylvilagus floridanusem> on the food habits of the red fox (Vulpes vulpes, between June 1998 and February 2000 fox diet was investigated by means of scat analysis (N=115 in a 250 ha wide Natural Reserve of NW Italy, and compared with data collected in the same area prior to cottontail colonization (1988-1989. Comparison included also the diet of badgers (<em>Meles melesem>, considered as potential competitors for food resources. Alien lagomorphs (mean percent volume, Vm% = 68% represented by far the most exploited resource, only three other food items reaching values of mean percent volume barely higher than 5%. Cottontails frequency of occurrence did not vary according either to season or to their reproductive cycle (II-IX vs. X-I, whilst diet niche breadth varied inversely proportional to the use of this key-resource. Overall fox trophic niche breadth varied from 0.64 in 1988-89 to 0.31 in 1998-00 (B, Levin’s index. These findings led us to consider the feeding habits of the fox in the study area as a result of local specialization of a typical generalist carnivore, according to the predictions of optimal foraging theory. No variation occurred in the badger niche breadth since cottontail introduction, whilst niche overlap between foxes and badgers decreased from 0.59 to 0.13 (O, Pianka’s index, possibly reducing competition for food in summer. Riassunto Specializzazione alimentare a livello locale della Volpe <em>Vulpes vulpesem> in risposta all’introduzione del Silvilago <em>Sylvilagus floridanusem> (Italia nord occidentale. Per valutare gli effetti dell’introduzione del Silvilago (<em>Sylvilagus floridanusem> sul comportamento alimentare della volpe (<em>Vulpes vulpesem>, nel periodo giugno 1998-febbraio 2000, la dieta del carnivoro è stata definita tramite l’analisi di 115

  15. A pesquisa em saúde e os objetivos do milênio: desafios e oportunidades globais, soluções e políticas nacionais

    Directory of Open Access Journals (Sweden)

    Morel Carlos M.

    2004-01-01

    Full Text Available Saúde, ciência e tecnologia são requisitos para o desenvolvimento econômico e social. Os Objetivos de Desenvolvimento do Milênio da ONU para 2015 representam um imenso desafio para os países em desenvolvimento. Esses países terão de organizar sistemas de pesquisa em saúde baseados em prioridades sanitárias e assegurar a incorporação dos resultados às políticas e ações de saúde. Avanços na área biomédica, em particular em genômica, abrem novas oportunidades, mas impõem desafios adicionais. O Brasil, possuidor de um forte parque industrial e uma vigorosa comunidade científica, tem capacidade para desenvolver um sistema de pesquisas em saúde capaz de contribuir efetivamente para o cumprimento das metas da ONU.

  16. Metabolic Profiling of <em>Lactococcus lactisem> Under Different Culture Conditions

    Directory of Open Access Journals (Sweden)

    Normah Mohd Noor

    2012-07-01

    Full Text Available Gas chromatography mass spectrometry (GC-MS and headspace gas chromatography mass spectrometry (HS/GC-MS were used to study metabolites produced by <em>Lactococcus lactisem> subsp. <em>cremoris> MG1363 grown at a temperature of 30 °C with and without agitation at 150 rpm, and at 37 °C without agitation. It was observed that <em>L. lactisem> produced more organic acids under agitation. Primary alcohols, aldehydes, ketones and polyols were identified as the corresponding trimethylsilyl (TMS derivatives, whereas amino acids and organic acids, including fatty acids, were detected through methyl chloroformate derivatization. HS analysis indicated that branched-chain methyl aldehydes, including 2-methylbutanal, 3-methylbutanal, and 2-methylpropanal are degdradation products of isoleucine, leucine or valine. Multivariate analysis (MVA using partial least squares discriminant analysis (PLS-DA revealed the major differences between treatments were due to changes of amino acids and fermentation products.

  17. The Frequency and Antibiotic Resistance of Chromate Tolerating Microorganisms in Qom Industrial wastewater

    Directory of Open Access Journals (Sweden)

    MR Zolfaghary

    2012-07-01

    Full Text Available

    <em>Background and Objectives:em> Chromium is one of the major sources of environmental pollution and a potent occupational carcinogen. The hexavalent chromium compounds are more toxic than those of trivalent. Recent studies have suggested that reduction of Cr(VI to its lower oxidation states and related free radical reactions play an important role in carcinogenic, genotoxic and immunotoxic effects in human and animals.

     This paper reports occurrence of chromium tolerant and antibiotic resistant organism of four industrial wastewaters including electroplating, textile, galvanization, and dye manufacturing in Qom.

     

    <em>Methods:> In this study 241 isolates including 23 gram positive coccus, 3 gram negative bacilli and 215 gram positive bacilli were obtained by using of LB Agar plus determined concentration of potassium chromate.

     

    <em>Results:> A gram positive coccus, chromate reducing bacteria strain isolated from effluent of chromo plaiting could tolerate up to 760mM concentration in 34°c and pH=7 within 24h and showed resistance to some antibiotics. Biochemical, physiological, morphological and 16SrRNA tests showed this bacteria belongs to staphylococcus arlettae strain R1-7A.

     

    <em>Conclusion:> the result indicates that the indigenous microbial isolates can be useful for hexavalent chromium detoxification of chromium contamination environment and reduction of its pathogenicity and carcinogenicity, on the other hand the control of these bacteria is important from the medical view.

     

  18. Matérias estranhas em canela em pó e páprica em pó, comercializadas no estado de São Paulo

    Directory of Open Access Journals (Sweden)

    CORREIA Marlene

    2000-01-01

    Full Text Available Com objetivos de padronizar metodologias para matérias estranhas em canela em pó e páprica em pó e de avaliar as condições higiênicas desses condimentos, foram adquiridas, no período de agosto a novembro de 1998, 78 amostras de canela em pó e 56 de páprica em pó, em estabelecimentos comerciais de seis cidades do Estado de São Paulo. Foram utilizados métodos da Association of Official Analytical Chemists International (AOAC - 1995, 16.14.12/968.38b para canela em pó e 16.14.22/977.25B para páprica em pó. Os métodos mostraram-se adequados, sem resíduos interferentes no papel de filtro que dificultasse o diagnóstico da análise e viáveis de serem utilizados nos laboratórios de Microscopia de Alimentos. Os resultados obtidos indicaram 100% das amostras contendo fragmentos de insetos; pêlos de roedor foram isolados em 73,1% de amostras de canela em pó e 34,0% de páprica em pó, enquanto ácaros mortos apareceram, respectivamente, em 37,2% e 12,5% de amostras. É necessário revisão da legislação de alimentos em vigor, com o estabelecimento de níveis de tolerância para fragmentos de insetos.

  19. Factors affecting Brown Hare (<em>Lepus europaeusem> hunting bags in Tuscany region (central Italy

    Directory of Open Access Journals (Sweden)

    Francesco Santilli

    2006-09-01

    Full Text Available Abstract We carried out an exploratory analysis of hare <em>Lepus europaeusem> hunting bags (number of brown hares shot in the nineteen Hunting Districts of Tuscany (central Italy from 2001 to 2004, in order to identify which variables (land use and characteristics, climate and management could affect hare harvest. Vineyards and grass in rotation with winter cereals were positively associated with the number of hares shot, whereas industrial crops (mainly sunflowers seemed to have a negative effect,as did the density of grazing sheep. Mean annual rainfall was negatively related to the harvest but with a borderline significance. We found a positive relationship between the number of hares harvested and the percentage of protected areas managed to conserve and produce small game species, whereas private hunting estates showed a negative association. Restocking both with wild hares captured in protected areas and with farm-reared animals did not show any effect on hunting bags of hares. Riassunto Fattori influenzanti il carniere di lepri (<em>Lepus europaeusem> in Toscana (Italia centrale E’ stata condotta una ricerca preliminare sui carnieri di lepre (dal 2001 al 2004 dei diciannove Ambiti Territoriali di Caccia della Toscana, al fine di identificare quali variabili (di tipo ambientale, climatico e gestionale possano influire sulla resa venatoria di questa specie. Il numero di lepri abbattute dai cacciatori è risultato influenzato positivamente dalla percentuale di vigneti e di foraggiere in avvicendamento, mentre le colture industriali (principalmente rappresentate dal girasole e la densità del bestiame ovicaprino hanno evidenziato un effetto negativo. Anche le precipitazioni medie annuali sono risultate associate negativamente al numero di lepri abbattute, tuttavia in questo caso la variabile non ha raggiunto il livello di significatività statistica. L’abbondanza del carniere di

  20. Selling America: How Post-Recession Ads Told Americans the Story of Themselves

    Directory of Open Access Journals (Sweden)

    Adriana Mariella

    2017-09-01

    Full Text Available This work argues that after the recession in 2007, a kaleidoscope of similar themes about industrial Americana and the beauty of work came to dominate representations of “Americanness” in advertising and pop culture. Brands like Levi’s, Walmart, and Chrysler depended on the careful overlaying of collective imagination with existent myths about work, class, and grit, to create a distinct picture of America’s industrial past and establish themselves as part of its heritage. In doing so, they helped populate American culture with a hegemonic sense of national identity. They depicted an America built from greasy hands on Rust Belt factory floors, “summed up” (as Jameson or Barthes might put it in whiskey, grit, and the frontier, in skyscrapers and pick up trucks. In turn, this reconstructed past helped inform an understanding of what made America, America and the things that would keep it that way: labor, hard work, “making.” In a post-industrial economy where widespread anxiety about industrial decline helped wage a Presidential campaign on promises to restore America to its former industrial glory, the stakes for remembering our past in this way are particularly high. To better understand how our past came to be remembered in this way, I look to modern culture’s blurred lines between entertainment and advertising, memory and fact, identity and myth, a phenomenon that has allowed advertising to disguise itself as historical fact and embed itself in collective memory. In capitalizing (quite literally on anxieties of the modern moment to appeal to traditional American notions, it is able to reinforce and re-invent them in the process.

  1. Identification of <em>Colletotrichum> species causing anthracnose on Tahiti lime, tree tomato and mango

    Directory of Open Access Journals (Sweden)

    Martínez Erika P.

    2009-08-01

    Full Text Available

    In Colombia, citrus, tree tomato and mango crops are likely to suffer considerable losses from anthracnose caused by several <em>Colletotrichum> species, which were identified by the present study on infected organs of the three fruit crops, sampled in different regions of the country. Identification was based on their morphological and molecular characteristics, as well as on fungicide (benomyl and copper hydroxide sensitivity and pathogenicity tests. The latter assessed infectivity on both the original hosting crop and the other two crops (crossed infection, by putting the fungi in contact with organs taken from the three fruit crops. Molecular identification of the <em>Colletotrichum> species was carried out through amplification of rDNA ITS regions by means of <em>C. gloeosporioidesem> (CgInt and <em>C. acutatumem> (CaInt2 specific primer PCR combining the use of ITS4 universal primer. The results indicate that <em>C. acutatumem> is the infectious agent in Tahiti lime and tree tomato, and so is <em>C. gloeosporioidesem> in mango. Although <em>C. acutatumem> is the infectious agent in two diferent fruit species, the strains proved to be specific of their original hosts.

  2. Tendências em séries anuais de precipitação e temperaturas no Brasil

    Directory of Open Access Journals (Sweden)

    Júlio César Penereiro

    Full Text Available RESUMO Nas últimas décadas, pesquisadores científicos e acadêmicos em todo o mundo têm se preocupado com a avaliação das tendências dos climas regional e global. A avaliação das alterações no clima é uma ferramenta para o planejamento da sociedade, pois permite considerar as possíveis consequências do aumento das temperaturas do ar e de mudanças no regime de precipitação que foram observadas ao redor do mundo. Sob a hipótese da presença de alterações climáticas no Brasil, o objetivo do presente estudo foi identificar a existência de tendências climáticas em 243 séries anuais de temperaturas máxima, mínima e média do ar (T-Máx., T-Mín. e T-Méd. e precipitação pluviométrica (Prec. em cidades do Brasil. Foram empregados os testes estatísticos de Mann-Kendall (M-K. e Pettitt (Pett. para avaliação de tendências significativas. Para a visualização espacial das tendências observadas, foram elaborados mapas. Os resultados estatísticos mostram que, de todas as cidades estudadas, foram observadas tendências positivas na T-máx. em 35% das séries, negativas em 1% e ausência de tendência em 64%. Para a T-Mín., foram observadas tendências positivas em 30% dos casos, negativas em 8% e ausência de tendência em 63%. Na T-Méd., tendência positiva foi detectada em 35% das cidades analisadas, negativa em 3% e ausência de tendência em 62%. Por fim, na Prec., tendência positiva em 6% dos casos, negativa em 4% e ausência de tendência em 91%. As tendências observadas no presente estudo estão possivelmente relacionadas às atividades antrópicas em cada localidade, como o expansionismo urbano, o desenvolvimento industrial e o adensamento populacional.

  3. Isolamento de micobactérias em Felis concolor em cativeiro

    Directory of Open Access Journals (Sweden)

    María Julia Traversa

    2009-02-01

    Full Text Available Este trabalho foi realizado em uma reserva natural da Argentina com antecedentes de tuberculose em uma suçuarana adulta. O objetivo foi identificar por meio de técnicas bacteriológicas e de biologia molecular as espécies isoladas da orofaringe de cinco suçuaranas que apresentavam sinais clínicos inespecíficos. As amostras foram colhidas das suçuaranas após sedação. Posteriormente foram processadas para obtenção do isolamento e identificação por meio de provas bioquímicas do gênero Mycobacterium pela técnica de PCR. Investigou-se a presença das seqüências de inserção IS6110 e IS1081 e hsp65. Obtiveram-se resultados positivos à coloração de Ziehl-Neelsen de quatro amostras, isolando cinco cepas de crescimento lento. As cepas foram classificadas como M. gordonae em dois casos e M. simiae, M scrofulaceum e M. avium/intracellulare em um. Por PRA, identificou-se o padrão de M. gordonae em três cepas e M. avium III ou M. simiae em dois.

  4. Marketing em moda

    OpenAIRE

    Leães, Sabrina Durgante

    2008-01-01

    Dissertação de mestrado em Design e Marketing O actual estado do Marketing em Moda é uma das questões ainda complexa com que se debate a sociedade global. As questões do Marketing em Moda percorrem alguns aspectos fundamentais tais como as constantes mutações do meio envolvente, a forma de como é percebida e comunicada a identidade das marcas de moda, em busca da melhor forma de segmentar o mercado e definir o seu posicionamento, bem como a reacção ao produto de moda do consumidor final. ...

  5. Synthesis and Antibacterial Evaluation of New <em>N>-acylhydrazone Derivatives from Dehydroabietic Acid

    Directory of Open Access Journals (Sweden)

    Wen Gu

    2012-04-01

    Full Text Available A series of new <em>N>-acylhydrazone derivatives were synthesized in good yields through the reactions of dehydroabietic acid hydrazide with a variety of substituted arylaldehydes. The structures of the synthesized compounds were confirmed by IR, 1H- and 13C-NMR, ESI-MS, elemental analysis and single crystal X-ray diffraction. From the crystal structure of compound 4l, the C=N double bonds of these <em>N>-acylhydrazones showed (<em>E>-configuration, while the NMR data of compounds 4aq indicated the existence of two rotamers for each compound in solution. The target compounds were evaluated for their antibacterial activities against four microbial strains. The result suggested that several compounds exhibited pronounced antibacterial activities. Particularly, compound 4p exhibited good antibacterial activity against <em>Staphylococcus aureusem> and <em>Bacillus subtilisem> comparable to positive control. The possible antibacterial metabolism and the strategy for further optimization of this compound were also discussed.

  6. Mortalidade por leucemias relacionada à industrialização Mortality by industrialization-related leukemias

    Directory of Open Access Journals (Sweden)

    Carmen Helena Seoane Leal

    2002-08-01

    Full Text Available OBJETIVO: Analisar a distribuição espacial da mortalidade por leucemia na população, buscando identificar agregados e estabelecer sua relação com os níveis de industrialização. MÉTODOS: O estudo foi realizado nas 43 regiões de governo do Estado de São Paulo, no qüinqüênio 1991-1995. Foi construído um "índice de industrialização relativo à leucemia" (IIRL baseado no número de indústrias e empregos industriais por 100.000 habitantes, valor adicionado fiscal, variedade de ramos industriais e indústrias com potenciais exposições de risco para a leucemia. O IIRL foi distribuído em cinco categorias. Verificaram-se os coeficientes padronizados de mortalidade por leucemia em cada uma das regiões, também distribuídos em cinco categorias e comparados ao mapa IIRL. RESULTADOS: As regiões mais industrializadas em ordem decrescente foram Campinas, Piracicaba, Jundiaí, Sorocaba e São Paulo. Não foi encontrada associação entre mortalidade, por nenhum tipo de leucemia, e industrialização. A região de Jales foi a que apresentou o mais alto coeficiente padronizado de mortalidade por leucemia. CONCLUSÕES: A distribuição da mortalidade por leucemia ocorreu de forma homogênea no Estado de São Paulo, não apresentando correlação com o nível de industrialização. Entretanto, aspectos relacionados ao método epidemiológico adotado -- estudo ecológico -- e ao uso do parâmetro "mortalidade por leucemia", doença cujo prognóstico tem mudado muito nas últimas décadas, limitaram a interpretação dos resultados.OBJECTIVE: To analyze the spatial distribution of mortality by leukemia in the population, looking for clusters, and to establish an association with the level of industrialization. METHOD: The study was carried out in 43 state regions of the state of São Paulo, Brazil, in the period between 1991 and 1995. It was created an Index of Industrialization-Related Leukemia (IIRL based on number of manufactures and

  7. Edible mushroom Pleurotus sajor-caju production on washed and supplemented sugarcane bagasse Produção do cogumelo comestível Pleurotus sajor-caju em bagaço de cana-de-açúcar lavado e suplementado

    Directory of Open Access Journals (Sweden)

    Evelise Moncaio Moda

    2005-04-01

    Full Text Available Traditionally, the cultivation of Pleurotus sajor-caju is performed on different composted and pasteurized agricultural residues. The objective of this study was to investigate whether traditional composting and pasteurization processes could be replaced by washed and supplemented (mineral or organic sugarcane bagasse. In one experiment, fresh sugarcane bagasse was immersed in hot water at 80°C for two hours (control or washed in fresh water for one hour using an adapted machine for residue treatment. In another experiment, fresh sugarcane bagasse was washed in fresh water (control, and supplemented with corn grits (organic supplementation, or supplemented with nutrient solution (mineral supplementation. In the first experiment, the washed bagasse presented a average biological efficiency (ABE of 19.16% with 44% contamination, and the pasteurized bagasse presented a ABE of 13.86% with 70% contamination. In the second experiment, corn grits presented the poorest performance, with a ABE of 15.66% and 60% contamination, while supplementation with the nutrient solution presented a ABE of 30.03%, whereas the control of 26.62%. Washing fresh sugarcane bagasse could suppress the pasteurized substrate in Pleurotus sajor-caju production, compensating a reduced ABE with a faster process.Tradicionalmente, o cultivo do Pleurotus sajor-caju é realizado utilizando-se diversos resíduos agrícolas, precedido dos processos de compostagem e pasteurização. O presente trabalho teve por objetivo comparar o processo de pasteurização com a lavagem do bagaço de cana-de-açúcar e avaliar formas de suplementação do bagaço, visando aumento na produtividade. No primeiro experimento, os colmos da cana-de-açúcar passaram por moenda para a extração do caldo, sendo em seguida desfibrados. No tratamento controle, o bagaço fresco foi pasteurizado em água a 80°C durante 2 horas e o outro tratamento consistiu na lavagem do bagaço fresco em centrífuga com

  8. Estudo da ocorrência de salmonelas em ingredientes, rações e suabes de pó colhidos em uma fábrica industrial de ração

    Directory of Open Access Journals (Sweden)

    Ricardo Albuquerque

    1999-01-01

    Full Text Available Durante um ano de colheita em uma fábrica comercial de ração, foram examinadas para a presença de Salmonella spp. 136 amostras de ingredientes de rações, 43 amostras de rações prontas e 110 amostras de suabes de pó. Apenas com o uso dos suabes é que não se conseguiu o isolamento. Entre os ingredientes examinados, encontrou-se salmonela em 19,85% das amostras, sendo que os subprodutos de origem animal foram mais fortemente contaminados, tendo propiciado 50% de percentual de isolamento; para os derivados lácteos, obtiveram-se 7,5%; e para outras matérias-primas, 12,5%. Foi obtido 4,65% de positividade para as rações examinadas.

  9. The production of chemicals from food processing wastes using a novel fermenter separator. Annual progress report, January 1993--March 1994

    Energy Technology Data Exchange (ETDEWEB)

    Dale, M.C.; Venkatesh, K.V.; Choi, H.; Salicetti-Piazza, L.; Borgos-Rubio, N.; Okos, M.R.; Wankat, P.C.

    1994-03-15

    The basic objective of this project is to convert waste streams from the food processing industry to usable fuels and chemicals using novel bioreactors. These bioreactors should allow economical utilization of waste (whey, waste sugars, waste starch, bottling wastes, candy wastes, molasses, and cellulosic wastes) by the production of ethanol, acetone/butanol, organic acids (acetic, lactic, and gluconic), yeast diacetyl flavor, and antifungal compounds. Continuous processes incorporating various processing improvements such as simultaneous product separation and immobilized cells are being developed to allow commercial scale utilization of waste stream. The production of ethanol by a continuous reactor-separator is the process closest to commercialization with a 7,500 liter pilot plant presently sited at an Iowa site to convert whey lactose to ethanol. Accomplishments during 1993 include installation and start-up of a 7,500 liter ICRS for ethanol production at an industry site in Iowa; Donation and installation of a 200 liter yeast pilot Plant to the project from Kenyon Enterprises; Modeling and testing of a low energy system for recovery of ethanol from vapor is using a solvent absorption/extractive distillation system; Simultaneous saccharification/fermentation of raw corn grits and starch in a stirred reactor/separator; Testing of the ability of `koji` process to ferment raw corn grits in a `no-cook` process.

  10. Marine EM: The Past, The Present, and The Future

    Science.gov (United States)

    Constable, S.

    2016-12-01

    The high cost of deepwater exploration motivated the development of commercial marine magnetotelluric (MT) exploration in 1995, but it wasn't until marine controlled-source electromagnetic (CSEM) methods burst upon the industry scene with the formation of three new contractors in 2002 that things got really exciting. Now the bubble has burst and the excitement has diminished, but marine EM remains an important tool for offshore exploration. Early mistakes were made as a result of poor instrumentation and a lack of good interpretation tools - unlike seismics, EM relies heavily on inversion to produce useful results - but both equipment and inversion codes have improved significantly. Still, there are mistakes that can be made. Rock anisotropy and seawater conductivity have to be handled appropriately. A strong galvanic response means that there is a resistivity/thickness ambiguity when imaging reservoirs, but the inductive nature of the data means that multi-frequency inversions are very much better than using single frequencies. Resolution will never be as good as for seismic methods, but is much better than for potential field methods and conductivity may often be a more diagnostic property than acoustic impedance. EM images resistivity, not hydrocarbon content, and false positives occasionally occur, but false negatives are rare. That is, without a CSEM signature there is little chance of discovering economical hydrocarbons. This should bode well for the future of the method.

  11. The 10 recommendations for prevention of radiation accidents in industrial gamma radiography; As 10 recomendacoes mais importantes para prevencao de acidentes radiologicos em gamagrafia industrial

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Luana Silva de

    2015-07-01

    The Industrial Gamma Radiography, as part of Industrial Radiography, stands out as the most widespread and plays an important role in the quality control of different materials and devices. However, IAEA classifies industrial gamma radiography in the Category 2 as very dangerous due to the radiological risk caused by the use of high activity radioactive sources. In March, 2012, a Brazilian Workshop on Prevention of Industrial Gamma Radiography Accident was performed by DIAPI/CNEN with the objective of disseminating knowledge about radiological accidents with radioactive sources in this application. During this Workshop, IRD/CNEN conducted a survey with 75 participants using a form with 22 recommendations to prevent radiological accidents, aiming to select the most voted. This present work aims to perform a detailed statistical study to define the Top 10 Recommendations for industrial gamma radiography operator avoids radiological accidents and to prepare a brochure with these top 10 recommendations to be distributed to all industrial gamma radiography radiation workers. Data analysis was performed using the statistical method 'Frequency Distribution', among the 75 participants categorized as General, RPO, and Other Workers of the area. The results were obtained for each category, accounting for the total of 22 recommendations in its percentage and number of votes, and the top 10 recommendations were defined to prevent radiological accidents. The first place and most important recommendation is 'Always use a personal alarm monitor throughout the work'. One of the conclusions is that the brochure with the Top 10 Recommendations shows to be understandable and useful for dissemination and training of radiation workers to avoid radiological accidents in industrial gamma radiography. (author)

  12. Infracommunities of intestinal helminths of the Red Fox <em>Vulpes vulpesem> (Linnaeus, 1758 from Italian Alps

    Directory of Open Access Journals (Sweden)

    Anna Rita Di Cerbo

    2003-10-01

    Full Text Available <em>Vulpes vulpesem> (Linnaeus, 1758 is one of the most common carnivore in Italy and its spread includes almost the whole national territory. The species shows an high ecological plasticity and a variable diet composition connected in part to human sources. This high adaptability permits the red foxes to colonize different habitats like the suburbs of large cities as well as the small villages located in mountain areas. On the other hand, the tourism pressure seems to assume a great importance in the Alps, also in those areas where the foxes live. So, indirect interactions could take place between these animals and the humans. The role of <em>V. vulpesem> in the zoonoses has not to be understated since this carnivore could transmit parasitic diseases that are able to cause serious pathologies in humans. This study aims just to investigate on intestinal communities of helmiths of <em>V. vulpesem> in order to make progress in current knowledge on epidemiological situation in Italian Alps. During 1998-2003, we have examined 450 foxes from Trentino Alto Adige, Veneto, Lombardia and Valle d'Aosta. The specimens collected were found dead or have been hunted (according to national law n. 157/92 in localities situated between 170 and 2200 m a.s.l. The carcasses were carried to the provincial sections of Zooprofilattici Institutes, where the intestine was drawn by each sample and all the material was sent to the Faculty of Veterinary Medicine of Milan. Parasitological examination of the small intestines was performed by the analysis of the whole sediment and counting technique (SCT. Parasites were preserved in alcohol 70° before to be clarified or stained and identified by microscope (Zeiss Axioscop. Mean abundance, mean intensity and prevalence were calculated for each taxon of helminth. Dates of sampling were grouped within the four seasons. Statistic tests were performed with software package SPSS rel. 11.5 and spatial analysis with the

  13. Enzymatic Properties and Mutational Studies of Chalcone Synthase from <em>Physcomitrella patensem>

    Directory of Open Access Journals (Sweden)

    Mahiran Basri

    2012-08-01

    Full Text Available <em>Pp>CHS is a member of the type III polyketide synthase family and catalyses the synthesis of the flavonoid precursor naringenin chalcone from <em>p>-coumaroyl-CoA. Recent research reports the production of pyrone derivatives using either hexanoyl-CoA or butyryl-CoA as starter molecule. The Cys-His-Asn catalytic triad found in other plant chalcone synthase predicted polypeptides is conserved in <em>Pp>CHS. Site directed mutagenesis involving these amino acids residing in the active-site cavity revealed that the cavity volume of the active-site plays a significant role in the selection of starter molecules as well as product formation. Substitutions of Cys 170 with Arg and Ser amino acids decreased the ability of the <em>Pp>CHS to utilize hexanoyl-CoA as a starter molecule, which directly effected the production of pyrone derivatives (products. These substitutions are believed to have a restricted number of elongations of the growing polypeptide chain due to the smaller cavity volume of the mutant’s active site.

  14. How Well Do Trait Measures of Achievement Predict Students' Perceptions of the Link between Personal Effort and Academic Performance?

    Science.gov (United States)

    Gray, Jennifer P.; Mannahan, Kimberly Kinsey

    2017-01-01

    The concept of Grit has gained momentum in the last several years as a better predictor of achievement than traditional measures, such as IQ. Duckworth, et al. (2007) found grit to be positively correlated to the Big Five personality dimension of conscientiousness, but not to IQ, causing the authors to hypothesize that grit is a good noncognitive…

  15. Accumulation, Biotransformation, Histopathology and Paralysis in the Pacific Calico Scallop <em>Argopecten ventricosusem> by the Paralyzing Toxins of the Dinoflagellate <em>Gymnodinium catenatumem>

    Directory of Open Access Journals (Sweden)

    Rosalba Alonso-Rodriguez

    2012-05-01

    Full Text Available The dinoflagellate <em>Gymnodinium catenatumem> produces paralyzing shellfish poisons that are consumed and accumulated by bivalves. We performed short-term feeding experiments to examine ingestion, accumulation, biotransformation, histopathology, and paralysis in the juvenile Pacific calico scallop <em>Argopecten ventricosusem> that consume this dinoflagellate. Depletion of algal cells was measured in closed systems. Histopathological preparations were microscopically analyzed. Paralysis was observed and the time of recovery recorded. Accumulation and possible biotransformation of toxins were measured by HPLC analysis. Feeding activity in treated scallops showed that scallops produced pseudofeces, ingestion rates decreased at 8 h; approximately 60% of the scallops were paralyzed and melanin production and hemocyte aggregation were observed in several tissues at 15 h. HPLC analysis showed that the only toxins present in the dinoflagellates and scallops were the <em>N>-sulfo-carbamoyl toxins (C1, C2; after hydrolysis, the carbamate toxins (epimers GTX2/3 were present. C1 and C2 toxins were most common in the mantle, followed by the digestive gland and stomach-complex, adductor muscle, kidney and rectum group, and finally, gills. Toxin profiles in scallop tissue were similar to the dinoflagellate; biotransformations were not present in the scallops in this short-term feeding experiment.

  16. Identification of Volatile Components of Liverwort (<em>Porella cordaeanaem> Extracts Using GC/MS-SPME and Their Antimicrobial Activity

    Directory of Open Access Journals (Sweden)

    Maria Elisabetta Guerzoni

    2012-06-01

    Full Text Available Chemical constituents of liverwort (<em>Porella cordaeanaem> extracts have been identified using solid-phase microextraction-gas chromatography mass spectrometry (SPME-GC/MS. The methanol, ethanol and ethyl acetate extracts were rich in terpenoids such as sesquiterpene hydrocarbons (53.12%, 51.68%, 23.16%, and monoterpene hydrocarbons (22.83%, 18.90%, 23.36%, respectively. The dominant compounds in the extracts were β-phellandrene (15.54%, 13.66%, 12.10% and β-caryophyllene (10.72%, 8.29%, 7.79%, respectively. The antimicrobial activity of the extracts was evaluated against eleven food microorganisms using the microdilution and disc diffusion methods. The minimum inhibitory concentration (MIC varied from 0.50 to 2.00 mg/mL for yeast strains (<em>Saccharomyces cerevisiae 635em>, <em>Zygosacharomyces bailii 45em>, <em>Aerobasidium pullulans L6Fem>, <em>Pichia membranaefaciens OC 71em>, <em>Pichia membranaefaciens OC 70em>, <em>Pichia anomalaem> <em>CBS 5759em>, <em>Pichia anomala DBVPG 3003em> and<em> em>>Yarrowia lipolytica RO13em>, and from 1.00 to 3.00 mg/mL for bacterial strains<em> em>(Salmonella> <em>enteritidis 155em>, <em>Escherichia coli 555em> and <em>Listeria monocytogenes 56Lyem>. Methanol extract showed better activity in comparison with ethanol and ethyl acetate extracts. High percentages of monoterpene and sesquiterpene hydrocarbons could be responsible for the better antimicrobial activity.

  17. Consumo de alcohol en trabajadores de una industria en Monterrey, México Consumo de álcool em trabalhadores de uma indústria em Monterrey, México Alcohol consumption among industrial workers in Monterrey , Mexico

    Directory of Open Access Journals (Sweden)

    Teresita de Jesús Campa Magallón

    2005-10-01

    Full Text Available El objectivo fue describir el consumo de alcohol en 129 trabajadores de una industria. La recolección de datos se realizó a través de los cuestionarios AUDIT y CECA. El mayor consumo fue en operarios masculinos con 31 años de edad, 9,8 años de escolaridad, 5 años de antigüedad laboral, casados, con consumo de 3 a 4 bebidas por ocasión (38,5%. Un consumo de 6 copas o más al mês se presentó en 32,7% de los operarios. La frecuencia de consumo mensual fue de 2 o 4 veces. 46,5% fueron considerados dependientes. Ocurrieron daños en 55% de los operarios y empleados. Los empleados refirieron consumo de alcohol en reuniones sociales con compañeros (63,6%. Los consecuencies del consumo fueron: cansancio físico (44,2%, problemas físicos (29,5%, disminución de rendimiento laboral (29,5% y la disminución de reflejos (21,7%. Delante del mayor consumo de alcohol, los trabajdores perciben menores consecuencias respecto a este consumo. Los que refirieron el no consumo se encontraban en la etapa de precontemplación.O objetivo foi descrever o consumo de álcool entre 129 trabalhadores de uma indústria. A coleta de dados foi realizada a través dos instrumentos AUDIT e CECA. A maior porcentagem de consumo foi em operários masculinos de 31 anos, escolaridade de 9,8 anos, tempo de trabalho 5 anos, casados. Identificou-se um consumo de 3 a 4 bebidas por ocasião (38,5%. Obteve-se o consumo de 6 copos ou mais por mês em 32,7% dos operários. A freqüência de consumo mensal foi de 2 ou 4 vezes, a dependência correspondeu a 46,5% e a ocorrência de danos a 55% dos operários e empregados. Os trabalhadores informaram consumo de álcool em encontros sociais com amigos (63,6%. As conseqüências desse consumo foram: cansaço físico (44,2%, problemas físicos (29,5%, diminuição do rendimento de trabalho (29,5% e diminuição de reflexos (21,7%. Diante de um maior consumo de álcool, os trabalhadores percebem menores conseqüências em relação a

  18. EM International. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    1993-07-01

    It is the intent of EM International to describe the Office of Environmental Restoration and Waste Management`s (EM`s) various roles and responsibilities within the international community. Cooperative agreements and programs, descriptions of projects and technologies, and synopses of visits to international sites are all highlighted in this semiannual journal. Focus on EM programs in this issue is on international collaboration in vitrification projects. Technology highlights covers: in situ sealing for contaminated sites; and remote sensors for toxic pollutants. Section on profiles of countries includes: Arctic contamination by the former Soviet Union, and EM activities with Germany--cooperative arrangements.

  19. Fornecimento de cálcio para plantas de eucalyptus saligna por meio de aplicação de resíduo industrial lama de cal

    OpenAIRE

    Simonete,Marcia Aparecida; Chaves,Djalma Miler; Teixeira,Claudia Fernanda Almeida; Moro,Leticia; Neves,Cíntia Urbano

    2013-01-01

    O resíduo industrial lama de cal, originado da produção de papel kraft branqueada de eucalipto, apresenta em sua composição quantidade considerável de cálcio (Ca), o que pode contribuir para reduzir o consumo de fertilizantes em plantios florestais. Com o objetivo de avaliar o efeito da lama de cal como fonte de Ca e seus efeitos sobre a disponibilidade de nutrientes e produção de matéria seca da parte aérea de plantas de eucalipto, foram conduzidos dois ensaios em vasos, em casa de vegetação...

  20. ENERGIA SOLAR TÉRMICA: INOVAÇÃO EM AQUECIMENTO DE ÁGUA PARA PROCESSOS INDUSTRIAIS / SOLAR THERMAL ENERGY: WATER HEATING INNOVATION FOR INDUSTRIAL PROCESSES

    Directory of Open Access Journals (Sweden)

    E. F. Carreira Junior

    2014-12-01

    Full Text Available O aumento do consumo mundial de energia tem gerado a busca de fontes alternativas, inclusive a solar, de fácil utilização, não exigindo equipamentos muito sofisticados nem complexos. Muitos processos industriais utilizam água em temperaturas até 100°C. O uso de energia solar na indústria ainda é baixo se comparado ao consumo energético total. O objetivo deste artigo é investigar possibilidades de usos de aquecimento solar de água em processos industriais, para o que foi utilizada pesquisa bibliográfica em artigos internacionais visando identificar o estágio atual dessas aplicações no mundo. Pesquisa exploratória de dados secundários do mercado brasileiro de sistemas de aquecimento solar no Departamento Nacional de Aquecimento Solar (DASOL, e no Plano Nacional de Eficiência Energética 2010-2030 (PNEf-2010 do Ministério de Minas e Energia, buscou caracterizar o estágio atual desse setor no Brasil. O estudo permite concluir que o uso de aquecimento solar de água em indústrias no Brasil é possível e representa uma alternativa que pode contribuir para a redução do custo e do consumo de energia em 30% a 40% dos processos de aquecimento em baixas temperaturas, especialmente nos setores de alimentos, bebidas, têxtil e químico.

  1. Qualidade industrial e maturação de frutos de laranjeira "valência" sobre seis porta-enxertos Industrial quality and maturation of fruits of 'valência' sweet orange trees on six rootstocks

    Directory of Open Access Journals (Sweden)

    Pedro Antonio Martins Auler

    2009-12-01

    Full Text Available Com o objetivo de avaliar a influência de seis porta-enxertos sobre a maturação e as características físico-químicas de frutos de laranjeira 'Valência', instalou-se um experimento em janeiro de 1994, no município de Nova Esperança-PR. O delineamento experimental foi de blocos ao acaso, com quatro repetições, três plantas úteis por parcela e seis tratamentos, constituídos pelos porta-enxertos: limoeiro 'Cravo' (Citrus limonia, tangerineiras 'Cleópatra' (C. reshni e 'Sunki' (C. sunki, citrangeiro 'Troyer' (Poncirus trifoliata x C. sinensis, tangeleiro 'orlando' (C. tangerina x C. paradisi e laranjeira 'Caipira'(C. sinensis. Avaliou-se a qualidade dos frutos em sete safras e a curva de maturação foi estimada para os anos de 1999 e 2000. Todos os porta-enxertos proporcionaram qualidade aceitável aos frutos da laranjeira 'Valência', com destaque para o citrangeiro 'Troyer' que superou o limoeiro 'Cravo' em rendimento industrial. Em um ano considerado com padrão climático normal, a evolução do índice tecnológico ajustou-se a uma equação de regressão quadrática, proporcionando melhor rendimento industrial quando os frutos foram colhidos no início de novembro, independentemente do porta-enxerto utilizado.In order to evaluate the influence of six rootstocks on the maturation and the physical characteristics and chemical composition of 'Valência' fruits, a research was conducted in a field established in 1994, in Nova Esperança city, state of Paraná, Brazil. A complete randomized block design was used, with four replications, three evaluated trees per plot and six treatments, constituted by the rootstocks: 'Rangpur' lime (Citrus limonia, 'Cleopatra' (C. reshni and 'Sunki' (C. sunki mandarins, 'Troyer' citrange (Poncirus trifoliata x C. sinensis, 'orlando' tangelo (C. tangerina x C. paradisi and 'Caipira' sweet orange (C. sinensis. Fruit quality was evaluated along seven harvesting seasons and the maturation curve was

  2. Desempenho de um reator Fenton em escala industrial aplicado à remoção de fenóis em uma planta de recuperação de resíduos da indústria de papel e celulose

    Directory of Open Access Journals (Sweden)

    Everton Skoronski

    2015-11-01

    Full Text Available Este trabalho descreve o desempenho de um reator Fenton em grande escala usado para remoção de fenol em uma planta de valorização dos resíduos da indústria de papel e celulose. O efluente consiste em óleo vegetal e fenol. A estação de tratamento objetiva tratar 4 m3 h-1 e é constituída por um pré-tratamento para remoção de óleo, reator Fenton, Flotador de Ar Dissolvido - FAD e uma lagoa de aeração. Para a avaliação da estação de tratamento foram comparadas análises próprias do efluente com análises feitas em laboratório certificado. A eficiência global de remoção de fenol é maior do que 99,7%. Foi demonstrado que a combinação do processo de oxidação avançada com o biológico constitui-se em um sistema de tratamentos interessante a fim de remover contaminantes recalcitrantes.

  3. Desempenho de clones elite de batata para caracteres agronômicos e de qualidade industrial

    Directory of Open Access Journals (Sweden)

    Giovani Olegario da Silva

    2015-02-01

    Full Text Available O objetivo deste trabalho foi verificar o desempenho de clones elite de batata, em relação a caracteres agronômicos e de qualidade industrial. Os experimentos foram realizados em Pelotas, RS, Canoinhas, SC, e Londrina, PR. Foi avaliado um conjunto de clones elite, pertencentes ao Programa de Melhoramento Genético de Batata, da Embrapa. O delineamento experimental foi o de blocos casualizados, com três repetições para Pelotas e Londrina e quatro para Canoinhas. Foram avaliados os caracteres massa total de tubérculos, massa comercial de tubérculos, número de tubérculos comerciais, percentagem de massa de tubérculos comerciais, massa média de tubérculos comerciais, peso específico, cor de fritura e ciclo vegetativo. A partir dos dados obtidos foram realizadas as análises de variância para cada local e teste de agrupamento de médias para cada caráter. Para identificação de clones apropriados ao mercado 'in natura', em que é fundamental o elevado potencial produtivo e precocidade, os clones mais promissores foram F80-03-06 e CL02-05, quando comparados à cultivar testemunha Ágata. Para o processamento industrial, em que o peso específico, a cor de fritura e o rendimento de tubérculo são caracteres importantes, destacou-se o clone F81-01-06, que apesar de não apresentar os maiores rendimentos totais, apresentou tubérculos grandes, ciclo vegetativo intermediário e boa aptidão para fritura, quando comparando-se ao cultivar testemunha Asterix.

  4. Condição ocular entre trabalhadores de uma indústria metalúrgica brasileira Ocular condition in a brazilian ironmaster industry

    Directory of Open Access Journals (Sweden)

    Thais Zamudio Igami

    2008-10-01

    Full Text Available OBJETIVO: Avaliar a condição ocular em população de trabalhadores de uma indústria metalúrgica paulista. MÉTODOS: Amostra de 2516 funcionários de uma fábrica na cidade de São Paulo foi submetida a uma avaliação oftalmológica como exame ocupacional periódico. Foi aplicado um questionário e realizado o exame de acuidade visual (Snellen e teste de Ishihara. Os funcionários com acuidade visual menor que 0,7 ou com diferenças maior que duas linhas ou que apresentassem alguma queixa ocular, passaram por avaliação complementar (biomicroscopia, refração, tonometria e fundo de olho. Prescreveu-se óculos conforme indicação. RESULTADOS: Houve predomínio do sexo masculino (62,5% e faixa etária de 20 a 29 anos (41%. A maioria não apresentava antecedentes oculares (97,6% ou sistêmicos (96,6%.A acuidade visual estava acima de 0,7 em 95,5% dos olhos e 84% não utilizavam correção. O diagnóstico final foi exame normal em 55% dos casos, presbiopia em 13.6%, astigmatismo miópico em 10% e hipermetrópico em 7,7% dos indivíduos. Baixa visão foi encontrada em 2,4%, cegueira unilateral em 0,4%, não havendo casos de cegueira ou de deficiência visual entre os trabalhadores. As principais causas de baixa visão foram erros refrativos e ambliopia. CONCLUSÃO: A maioria dos funcionários da indústria pesquisada apresentava exame oftalmológico normal e nenhum deles apresentava cegueira bilateral.PURPOSE: To evaluate the ocular condition in a brazilian ironmaster industry. METHOD: A prospective study was conducted in 2516 employees from an ironmaster brazilian industry in São Paulo city, Brazil. A questionnaire was applied and visual acuity and Ishihara test were performed in every individual. A complete ophthalmic evaluation (slit lamp examination, fundoscopy, tonometry and refractometry was done when the visual acuity was worse than 0.7 or when the worker had a greater diference between the eyes (more than two lines or when there were

  5. Reestruturação industrial, desemprego e autogestão: as cooperativas do Vale do Sinos Industrial restructuring, unemployment and self-management: the cooperatives in the Sinos Valley

    Directory of Open Access Journals (Sweden)

    Jacob Carlos Lima

    2008-06-01

    Full Text Available Este artigo objetiva analisar uma situação típica do quadro de multiplicação de cooperativas de trabalho que atuam como empresas terceirizadas: a organização de cooperativas por sindicatos de trabalhadores como forma de reação ao desemprego decorrente da reestruturação industrial do setor calçadista. Foram pesquisadas cinco cooperativas de um total de nove, nos municípios de Novo Hamburgo e Parobé no Vale do Rio dos Sinos, no Rio Grande do Sul, que trabalham para grandes indústrias sediadas na região. Procurou-se analisar o processo de reestruturação do setor, suas conseqüências em termos de desemprego, o papel dos sindicatos na organização e suporte das cooperativas e a percepção dos trabalhadores acerca da autogestão, da sua situação de proprietário-gestor-trabalhador em face de a experiências anteriores de trabalho assalariado.This article intends to analyze a situation typical of the increasing structure of work cooperatives that act as outsourcing companies: the organization of cooperatives by workers' unions as a reaction to the unemployment that followed the industrial restructuring of the footwear sector. This research examines five of nine cooperatives that work for large local industries in the municipalities of Novo Hamburgo and Parobé, in the Sinos Valley, Rio Grande do Sul, Brazil. The aim is to analyze the industry's restructuring process, its consequences in terms of unemployment, the unions' role in the organization and support of cooperatives, and the workers' perception of the self-management, their situation as owners-managers-workers, as opposed to their previous experiences as employees.

  6. Home range dynamics of mountain hare (<em>Lepus timidusem> in the Swiss Alps

    Directory of Open Access Journals (Sweden)

    Anne-Sophie Genini-Gamboni

    2009-02-01

    Full Text Available Abstract Little is known on the ecology and behaviour of alpine mountain hare (<em>Lepus timidusem>. Between 1996 and 1997 we analysed by radiotracking the pattern of space use of 8 mountain hares from the Swiss Alps. We estimated home range size using both the kernel density estimator and the minimum convex polygon. We found smaller ranges (38 ha compared to those reported for the species in boreal or arctic habitats, but similar to ranges in Scotland. Hares did not use a centre of major activity (core area and showed high home range overlap, confirming their non-territorial behaviour. Smaller ranges were used during winter compared to the other seasons, whilst no difference in size was found between sexes. Riassunto Dinamica dell'uso dello spazio della lepre bianca (<em>Lepus timidusem> nelle Alpi Svizzere Le informazioni relative all'ecologia e al comportamento della lepre alpina (<em>Lepus timidusem> sono ad oggi scarse. In questo studio abbiamo analizzato l'utilizzo dello spazio di una popolazione di lepre bianca sulle Alpi Svizzere. Tra il 1996 e il 1997 sono stati marcati con redio collare 8 individui di lepre alpina. L'<em>home rangeem> è stato calcolato utilizzando lo stimatore di densità kernel (KDE ed il metodo del minimo poligono convesso (MCP. L'ampiezza degli <em>home rangeem> (38 ha è risultata inferiore a quella riportata per la specie in habitat boreali ed artici. ma simile a quella riscontrata in Scozia. All'interno dell <em>home rangeem> non è stato rilevato alcun centro di maggiore attività (<em>core areaem> ed è stata evidenziata una notevole sovrapposizione tra gli stessi, confermando la non territorialità della specie. Le aree frequentate in inverno sono risultate più piccole rispetto alle altre stagioni e non sono state riscontrate differenze tra i sessi.

  7. Os objetos epistêmicos das toxoplasmoses e suas reapresentações em um congresso científico internacional

    OpenAIRE

    Silva,Vera Lucia Marques da; Camargo Júnior,Kenneth Rochel de

    2012-01-01

    O artigo investiga os objetos epistêmicos do Toxoplasma gondii e a correlação de forças de grupos de pesquisa empenhados em reconfigurar a toxoplasmose. A pesquisa de dados e a análise foram conduzidas à luz dos conceitos de 'manipulação' e 'reeencenação', com base na ideia de 'dramatização' proposta por Mol em estudo de filosofia empírica. Constatou-se que os objetos foram reapresentados a partir de matizes diversificados e com forte vinculação ao complexo industrial. Por sua projeção nos ru...

  8. <em>Botulinum Neurotoxinem> A Injections Influence Stretching of the Gastrocnemius Muscle-Tendon Unit in an Animal Model

    Directory of Open Access Journals (Sweden)

    Christopher J. Tuohy

    2012-08-01

    Full Text Available <em>Botulinum Neurotoxinem> A (BoNT-A injections have been used for the treatment of muscle contractures and spasticity. This study assessed the influence of (BoNT-A injections on passive biomechanical properties of the muscle-tendon unit. Mouse gastrocnemius muscle (GC was injected with BoNT-A (<em>n> = 18 or normal saline (<em>n> = 18 and passive, non-destructive, <em>in vivoem> load relaxation experimentation was performed to examine how the muscle-tendon unit behaves after chemical denervation with BoNT-A. Injection of BoNT-A impaired passive muscle recovery (15% <em>vs.> 35% recovery to pre-stretching baseline, <em>p> < 0.05 and decreased GC stiffness (0.531 ± 0.061 N/mm <em>vs.> 0.780 ± 0.037 N/mm, <em>p> < 0.05 compared to saline controls. The successful use of BoNT-A injections as an adjunct to physical therapy may be in part attributed to the disruption of the stretch reflex; thereby modulating <em>in vivoem> passive muscle properties. However, it is also possible that BoNT-A injection may alter the structure of skeletal muscle; thus modulating the <em>in vivoem> passive biomechanical properties of the muscle-tendon unit.

  9. Seasonal changes of trophic niche overlap in the stone marten (<em>Martes foinaem> and the red fox (<em>Vulpes vulpesem> in a mountainous area of the Northern Apennines (N-Italy

    Directory of Open Access Journals (Sweden)

    Anna Brangi

    1995-12-01

    Full Text Available Abstract Between 1989 and 1991, 284 scats of stone marten (<em>Martes foinaem> and 642 scats of red fox (<em>Vulpes vulpesem> were collected in a 280 km² mountainous area in the northern Apennines. The scats were analyzed to identify differences between the two species' diets. The prey were grouped in 6 food categories: Fruits, Other Vegetables, Small Mammals, Other Vertebrates, Invertebrates and Garbage. Annual trophic niche was wider in the Red fox (0.62 than in the stone marten (0.53. We also found a large overlap between the two species with some small differences: Other Vertebrates, Small Mammals and Other Vegetables were more used by the Red fox, while Fruits were more used by the stone marten. Riassunto Variazioni stagionali della sovrapposizione di nicchia trofica della faina (<em>Martes foinaem> e della volpe (<em>Vulpes vulpesem> in un'area montana degli Appennini settentrionali - Tra il 1989 e il 1991 sono state raccolte 284 feci di faina (<em>Martes foinaem> e 642 feci di volpe (<em>Vulpes vulpesem> in un'area montuosa di 280 km² situata nell'Appennino settentrionale. Le feci sono state analizzate per evidenziare le eventuali differenze nella dieta delle due specie. Le singole prede sono state raggruppate in 6 categorie alimentari: Frutta, Altri Vegetali, Micromammiferi, Altri Vertebrati, Invertebrati, Rifiuti. L'ampiezza annuale della dieta è risultata maggiore nella Volpe (0,62 che non nella Faina (0,53. È stata trovata inoltre una larga sovrapposizione tra le due specie con alcune differenze nell'uso degli Altri Vertebrati, dei Micromammiferi e degli Altri Vegetali che è maggiore nella Volpe e della Frutta, maggiore nella Faina.

  10. Biología y ciclo reproductivo de <em>Apanteles gelechiidivorisem> (Hymenoptera: Braconidae, parasitoide de <em>Tuta absolutaem> (Lepidoptera: Gelechiidae

    Directory of Open Access Journals (Sweden)

    Bajonero Johanna

    2008-12-01

    Full Text Available

    <em>Apanteles gelechiidivorisem> es un parasitoide de larvas de <em>Tuta absolutaem> (Lepidoptera: Gelechiidae, una plaga importante de cultivos como el tomate y la papa. El uso de este insecto para el control biológico no se ha implementado eficientemente debido a la falta de conocimiento de la biología, específicamente del ciclo de vida y el efecto de factores externos, como la temperatura, en su capacidad parasítica. Se evaluó el desarrollo y la capacidad reproductiva de <em>A. gelechiidivorisem> en cuatro condiciones térmicas: 14, 20, 26 y 32 °C. En la evaluación del desarrollo se realizó una descripción del ciclo, se determinó la duración total de este, se estimaron los umbrales térmicos para cada estadio utilizando el modelo de Lactin y se hallaron los grados día. En la evaluación de la capacidad reproductiva se variaron las densidades del hospedero ofrecidas a una pareja recién emergida de la avispa de 5 hasta 160 y se contó el número de adultos emergidos con los cuales se evaluó longevidad y fecundidad. Adicionalmente se ajustó un modelo de respuesta funcional. La duración del ciclo de vida para las temperaturas evaluadas fue de 39 días en 14 °C, 34 en 20 °C, 19 en 26 °C y 17 en 32 °C. La longevidad fue de 7,5 (14 °C, 7 (20 °C, 5 (26 °C y 2,4 (32 °C días. La temperatura a la cual se pueden optimizar los parámetros reproductivos de esta avispa se encuentra entre 20 y 26 °C.

  11. Feeding habits of the genet <em>Genetta genettaem> in an Iberian continental wetland

    Directory of Open Access Journals (Sweden)

    Maite Sánchez

    2009-02-01

    Full Text Available Abstract This study quantified the diet of the genet <em>Genetta genettaem> in an Iberian continental wetland, the Galachos Nature Reserve, northern Spain, based on the frequency with which items appeared in five monthly-surveyed latrines during 2004-2005. Prey types were identified <em>de visuem> using identification keys and expert advice. the genet was confirmed as an opportunistic and generalist predator, its diet including mammals (95.0%, plants (68.3% and arthropods (60.0% as main prey. With the exception of a newly available prey species, the alien crayfish <em>Procambarus clarkiiem>, the genet probably consumed arthropods because of chance encounters rather than active search. The consumption of fruits and small mammals varied seasonally. Riassunto Alimentazione della genetta <em>Genetta genettaem> in un'area umida continentale della penisola iberica La dieta della genetta è stata investigata in un'area umida interna della Spagna settentrionale, la riserva Naturale dei Galachos. La frequenza di ciascuna categoria alimentare è stata espressa come numero di occorrenze mansili in cinque latrine monitorate per il periodo 2004-2005. Le categorie sono state identificate <em>de visuem> tramite chiavi per il riconoscimento o l'intervento di singoli esperti. I risultati confermano il comportamento alimentare generalista e opportunista della genetta. La dieta ha incluso principalmente mammiferi (95%, vegetali (68.3% e artropodi (60%. Questi ultimi, con l'eccezione del gambero <em>Procambarus clarkiiem>, introdotto e di recente presenza, sono probabilmente utilizzati in modo opportunistico, piuttosto che in seguito a ricerca attiva. L'uso dei frutti e dei micromammiferi varia stagionalmente.

  12. Environmental Management System Adoption and the Operational Performance of Firm in the Textile and Apparel Industry of China

    Directory of Open Access Journals (Sweden)

    Biao Li

    2017-06-01

    Full Text Available In China, more firms in the textile and apparel industry adopt environmental management systems compared to firms that manufacture other products. It is important to know how the firms’ financial and real performances are affected. We study the changes of firms’ performance in profitability, sales, and operational efficiency after environmental management system (EMS adoption using an event study. Based on 22 events of EMS adoption, we found a significant decrease in firms’ profitability, sales, and inventory productivity. We explore the reasons which led to the decrease in firm performances. We found that the increase in sample firms’ total assets is the major reason. The loss in operational efficiency and flexibility are due to the requirements of the EMS.

  13. Shallow Water UXO Technology Demonstration Site Scoring Record No. 5 (NAEVA/XTECH, EM61 MKII)

    Science.gov (United States)

    2008-04-01

    been fired or degaussed. Clutter items fit into one of three categories: ferrous, nonferrous , and mixed metals . The ferrous and nonferrous ...electromagnetic (EM) metal detectors . The system was relatively lightweight, requiring a small aluminum boat for towing. This configuration should...composed of ordnance components; however, industrial scrap metal and cultural items are present as well. The mixed- metals clutter is composed of

  14. Roost selection by barbastelle bats (<em>Barbastella barbastellusem>, Chiroptera: Vespertilionidae in beech woodlands of central Italy

    Directory of Open Access Journals (Sweden)

    Danilo Russo

    2003-10-01

    Full Text Available The barbastelle bat, <em>Barbastella barbastellusem> (Schreber, 1774 is a medium-sized, tree-dwelling vespertilionid classified as ?Endangered? in Italy; in western Europe it may be one of the rarest bat species. <em>B. barbastellusem> shows roosting preferences that should be regarded as a key point in conservation protocols. We examined roost selection in a breeding population of <em>B. barbastellusem> from the Abruzzo Lazio and Molise National Park (central Italy at three levels: woodland structure and management type; tree characteristics; and cavity characteristics. In 2001-2002, we fitted 31 adult <em>B. barbastellusem> (29 lactating females, one pregnant female and one male with 0.48g radio-tags and tracked them to their roost-trees. The bats were tracked for 4.5 ± 3.7 days (range: 0-12 days. We located 33 roosts used by 25 subjects (1.8±1.2 roosts/bat, range 1-5. The bats switched roosts frequently: 13 bats used more than one tree over the study period. A chi-square analysis showed that the roosts were not distributed at random across woodland categories: unmanaged woodland was positively selected, whereas shelterwood-harvested woodland was used in proportion to its availability, and ?pastures+scattered trees? was avoided. Twenty out of 33 roost trees were dead <em>Fagus sylvaticaem> trees; conversely, living <em>F. sylvaticaem> dominated in a tree sample obtained at random; dead trees were used more than expected (Χ² test, <em>P> <0.001. Overall, roost trees were significantly taller and had a larger diameter at breast?s height and more cavities than random trees; they also had a lower percent canopy closure than random trees. To highlight which variables were actually associated with selection, we devised a logistic regression model. The full model was significant (<em>P> <0.001; removal of tree type and tree height affected the model significantly, but the other variables did not produce detectable effects. The

  15. Nucleo multiprocessado para aplicações em tempo-real

    OpenAIRE

    Roberto Andre Hexsel

    1988-01-01

    Resumo: Esta Dissertação descreve o nucleo de tempo-real do Multiprocessador para Sistemas de Controle (MSC). O MSC foi desenvolvido no Instituto de Automação do Centro Tecnológico para Informática e possui características que o tornam adequado a aplicações em controle de processos e automação industrial. Estas aplicações exigem respostas rápidas a eventos externos e grande capacidade de processamento. O MSC pode ser configurado para satisfazer as mais diversas aplicações e diferentes níveis ...

  16. Synthesis and Sensory Evaluation of <em>ent>-Kaurane Diterpene Glycosides

    Directory of Open Access Journals (Sweden)

    Venkata Sai Prakash Chaturvedula

    2012-07-01

    Full Text Available Catalytic hydrogenation of the three <em>ent>-kaurane diterpene glycosides isolated from <em>Stevia rebaudianaem>, namely rubusoside, stevioside, and rebaudioside-A has been carried out using Pd(OH2 and their corresponding dihydro derivatives have been isolated as the products. Synthesis of reduced steviol glycosides was performed using straightforward chemistry and their structures were characterized on the basis of 1D and 2D NMR spectral data and chemical studies. Also, we report herewith the sensory evaluation of all the reduced compounds against their corresponding original steviol glycosides and sucrose for the sweetness property of these molecules.

  17. Solubilidade de micronutrientes contidos em formulações de fertilizantes, em extratores químicos Micronutrient solubility in fertilizer mixtures by chemical extractors

    Directory of Open Access Journals (Sweden)

    J. C. Alcarde

    2003-04-01

    Full Text Available A legislação brasileira adota o teor total para a garantia dos micronutrientes em fertilizantes. Isso permite a utilização de subprodutos de várias origens, baratos, mas que nem sempre apresentam os micronutrientes em formas disponíveis às plantas. Estudou-se a solubilidade dos micronutrientes em formulações de fertilizantes, utilizando os extratores água e soluções de ácido cítrico 20 g L-1 e citrato neutro de amônio (1 + 9, já usados na avaliação de matérias-primas. Os resultados foram semelhantes, tanto na avaliação das formulações como de matérias-primas, isto é, a solução de ácido cítrico a 20 g L-1 possibilita avaliar, com mais segurança, o conteúdo de micronutrientes em formulações de fertilizantes, representando uma alternativa para o teor total, que não é um critério adequado, do ponto de vista agronômico, para avaliar os micronutrientes contidos em fertilizantes.In Brazilian legislation, the control for micronutrient concentrations in mineral fertilizers considers the total content. As a consequence, low-cost by-products and even industrial residues are generally used as a source for micronutrients, despite their low availability to plants. To evaluate fertilizer solubilities, water, citric acid 20 g L-1, and neutral ammonium citrate (1 + 9 extracting solutions were applied to mixtures containing micronutrients. The same study was realized for micronutrient sources. Results were similar for both sources and mixtures. Citric acid solution 20 g L-1 was the most promising option to evaluate micronutrient contents in fertilizer mixtures. From the agronomic point of view, the total content is an inadequate criterion for the determination of micronutrient contents in chemical fertilizers.

  18. Ploidia de DNA em astrocitomas: estudo em 66 pacientes brasileiros

    Directory of Open Access Journals (Sweden)

    KRUTMAN-ZVEIBIL DEBORAH

    1999-01-01

    Full Text Available A determinação do conteúdo de DNA nuclear (fração de fase S e ploidia de DNA foi realizada por meio de análise de imagem em 66 astrocitomas, a partir de material fixado em formalina e seccionado em cortes de 5 micrômetros corados pela técnica de Feulgen. Nossos resultados mostraram forte relação entre a idade do paciente, grau histológico e sobrevida , com a ploidia de DNA e o percentual de células em fase de síntese. A análise da atividade proliferativa de astrocitomas intracranianos é a nosso ver muito útil no entendimento do comportamento biológico , do prognóstico e para o planejamento terapêutico dessas lesões.

  19. Bolhas imobiliárias em destinos turísticos: uma exploração preliminar

    Directory of Open Access Journals (Sweden)

    Maria do Livramento Miranda Clementino

    2012-08-01

    Full Text Available Resumo

    O artigo analisa as condições de emergência de bolhas imobiliárias em destinos turísticos que fazem parte dos circuitos de comercialização das grandes operadoras internacionais de turismo. Inicialmente aborda a literatura que trata das temáticas especulação e bolhas de ativos e sua consideração no setor imobiliário, definindo os indicadores a partir dos quais é possível identificar a emergência de uma bolha imobiliária em um dado espaço.  Examina os fatores associados às condições de demanda e oferta do setor em uma destinação turística e adota a hipótese de ser o turismo internacional um mecanismo propagador das bolhas de imóveis que estejam ou tenham ocorrido nos grandes centros emissores desses visitantes. Conclui que o movimento especulativo nos mercados imobiliários desses destinos deve ser reforçado por determinantes internos, como a demanda interna, que tende a ser fortemente impulsionada pelo movimento especulativo, assim como pela expansão do crédito no interior desses territórios, decorrente da política monetária em vigor.

    Palavras-chaves: bolhas imobiliárias; turismo; crédito.

     <em>Abstractem><em>The article analyzes the emergence conditions for real estate bubbles in tourist destinations that are part of the marketing channels of large international tour operators. Initially it discusses the literature dealing with speculation and asset bubbles themes in the real estate industry

  20. Chapter 19: HVAC Controls (DDC/EMS/BAS) Evaluation Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

    Energy Technology Data Exchange (ETDEWEB)

    Kurnik, Charles W. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Romberger, Jeff [SBW Consulting, Inc., Bellevue, WA (United States)

    2017-10-09

    The HVAC Controls Evaluation Protocol is designed to address evaluation issues for direct digital controls/energy management systems/building automation systems (DDC/EMS/BAS) that are installed to control heating, ventilation, and air-conditioning (HVAC) equipment in commercial and institutional buildings. (This chapter refers to the DDC/EMS/BAS measure as HVAC controls.) This protocol may also be applicable to industrial facilities such as clean rooms and labs, which have either significant HVAC equipment or spaces requiring special environmental conditions.

  1. Monitores de diagnóstico em Mamografia : (Os 5MP em Portugal)

    OpenAIRE

    Timóteo, Maria Teresa

    2012-01-01

    O carcinoma da mama é o mais comum nas mulheres, em Portugal morrem cerca de 1500 mulheres por ano devido a esta patologia. Serviu o presente estudo para investigar se os Hospitais da Região de Lisboa e Vale do Tejo estão equipados, com monitores de diagnóstico em mamografia, que correspondam com as guidelines europeias. O serviço de Mamografia, em Portugal rege-se por estas guidelines, em que é referenciado que para um correcto diagnóstico, com toda a sensibilidade e especific...

  2. Are EM's communication tools effective? Evaluation research of two EM publications

    International Nuclear Information System (INIS)

    Wight, Evelyn; Gardner, Gene; Harvey, Tony

    1992-01-01

    As a reflection of its growing culture of openness, and in response to the public's need for accurate information about its activities, the U.S. Department of Energy (DOE) Office of the Assistant Secretary for Environmental Restoration and Waste Management (EM) has increased the amount of information available to the public through communication tools such as brochures, fact sheets, and a travelling exhibit with an interactive computer display. Our involvement with this effort has been to design, develop, and critique booklets, brochures, fact sheets and other communication tools for EM. This paper presents an evaluation of the effectiveness of two communication tools we developed: the EM Booklet and the EM Fact Sheets. We measured effectiveness using non-parametric testing. This paper describes DOE's culture change, EM's communication tools and their context within DOE'S new open culture, our research, test methods and results, the significance of our research, and our plans for future research. (author)

  3. Qualidade industrial do trigo em resposta à adubação verde e doses de nitrogênio Baking quality of wheat in response to green manure and nitrogen rates

    Directory of Open Access Journals (Sweden)

    Cilas Pinnow

    2013-01-01

    Full Text Available O objetivo deste estudo foi avaliar os efeitos de adubos verdes cultivados entre a cultura do milho e a do trigo e da adubação nitrogenada sobre a qualidade industrial do trigo. Os tratamentos consistiram de quatro níveis de adubação nitrogenada: sem adição de nitrogênio, 40, 80 e 120 kg ha-1 e seis manejos outonais: quatro com o cultivo de espécies de cobertura (ervilha forrageira, ervilhaca comum, nabo forrageiro e tremoço, um cultivo de feijoeiro com fins comerciais e outro com a permanência em pousio no período compreendido entre a colheita do milho e a semeadura do trigo. O delineamento experimental foi o de blocos ao acaso em esquema fatorial, com três repetições. O rendimento de proteína aumentou linearmente com a aplicação de nitrogênio mineral. As doses de 80 e 120 kg ha-1 de nitrogênio afetaram positivamente o desempenho dos parâmetros indicativos da qualidade industrial. A ervilha forrageira, o nabo forrageiro e a ervilhaca comum permitem combinar indíces de qualidade tecnológica ideais para panificação e satisfatórios patamares de produtividade de grãos, reduzindo a demanda de adubação nitrogenada mineral.The objective this study was to investigate the effects of green manures cultivated between the maize and wheat crop and nitrogen rates on baking quality of spring wheat. Treatments consisted of four nitrogen fertilization rates: without N addition, 40, 80 and 120 kg ha-1 using the amidic form, and six managements before wheat crop: four green manures forage pea, common pea, oilseed radish and lupine, common bean grown for commercial purposes, and the fallow between the corn harvest and wheat cropping. The experimental design was in randomized blocks and factorial scheme, with three replicates. The protein yield increased linearly with the application of mineral N rates. The nitrogen rates of 80 and 120 kg ha-1 improved the baking wheat quality. The forage pea, oilseed radish and common pea allowed ideal

  4. Qualidade industrial do trigo em resposta à adubação verde e doses de nitrogênio Baking quality of wheat in response to green manure and nitrogen rates

    Directory of Open Access Journals (Sweden)

    Cilas Pinnow

    2013-03-01

    Full Text Available O objetivo deste estudo foi avaliar os efeitos de adubos verdes cultivados entre a cultura do milho e a do trigo e da adubação nitrogenada sobre a qualidade industrial do trigo. Os tratamentos consistiram de quatro níveis de adubação nitrogenada: sem adição de nitrogênio, 40, 80 e 120 kg ha-1 e seis manejos outonais: quatro com o cultivo de espécies de cobertura (ervilha forrageira, ervilhaca comum, nabo forrageiro e tremoço, um cultivo de feijoeiro com fins comerciais e outro com a permanência em pousio no período compreendido entre a colheita do milho e a semeadura do trigo. O delineamento experimental foi o de blocos ao acaso em esquema fatorial, com três repetições. O rendimento de proteína aumentou linearmente com a aplicação de nitrogênio mineral. As doses de 80 e 120 kg ha-1 de nitrogênio afetaram positivamente o desempenho dos parâmetros indicativos da qualidade industrial. A ervilha forrageira, o nabo forrageiro e a ervilhaca comum permitem combinar indíces de qualidade tecnológica ideais para panificação e satisfatórios patamares de produtividade de grãos, reduzindo a demanda de adubação nitrogenada mineral.The objective this study was to investigate the effects of green manures cultivated between the maize and wheat crop and nitrogen rates on baking quality of spring wheat. Treatments consisted of four nitrogen fertilization rates: without N addition, 40, 80 and 120 kg ha-1 using the amidic form, and six managements before wheat crop: four green manures forage pea, common pea, oilseed radish and lupine, common bean grown for commercial purposes, and the fallow between the corn harvest and wheat cropping. The experimental design was in randomized blocks and factorial scheme, with three replicates. The protein yield increased linearly with the application of mineral N rates. The nitrogen rates of 80 and 120 kg ha-1 improved the baking wheat quality. The forage pea, oilseed radish and common pea allowed ideal

  5. ESTABILIDADE DO ÁCIDO ASCÓRBICO EM SUCO DE LARANJA (Citrus sinensis) IN NATURA, EM SUCO REFRIGERADO E EM PREPARADOS QUENTES

    OpenAIRE

    Alves, Ana Paula de Faria; Santos, Janine V.; Neves, Laudelina B.; Sereia, Maria Josiane

    2008-01-01

    Foi realizada avaliação comparativa da retenção da vitamina C (ácido Ascórbico – AA) em suco fresco de laranjas íntegras, suco de laranja estocada sob refrigeração e em bolo contendo suco de laranja após a cocção em forno culinário convencional. O teor de AA em suco de laranjas armazenadas sob refrigeração por oito semanas variou entre 74,94 e 51,55 mg% com taxa de redução de 0,92% ao dia. Em suco fresco de laranja armazenado sob refrigeração durante sete dias, o teor médio de AA foi de 49,62...

  6. Synthesis and Cytotoxicity Evaluation of 13-<em>n>-Alkyl Berberine and Palmatine Analogues as Anticancer Agents

    Directory of Open Access Journals (Sweden)

    Lei Zhang

    2012-09-01

    Full Text Available By introducing long carbon-chain alkyl groups at the C-13 position of berberine and palmatine, 13-<em>n>-hexyl/13-<em>n>-octyl berberine and palmatine chloride analogues 4ad were synthesized and examined by MTT assays for cytotoxic activity in seven human cancer cell lines (7701QGY, SMMC7721, HepG2, CEM, CEM/VCR, KIII, Lewis, yielding IC50 values of 0.02 ± 0.01–13.58 ± 2.84 μM. 13-<em>n>-Octyl palmatine (compound 4d gave the most potent inhibitor activity, with an IC50 of 0.02 ± 0.01 μM for SMMC7721. In all cases, the 13-<em>n>-alkyl berberine and palmatine analogues 4ad were more cytotoxic than berberine and palmatine. In addition, compounds 4ad also exhibited more potent cytotoxicity than berberine and palmatine in mice with S180 sarcoma xenografted<em> in vivoem>. The primary screening results indicated that the 13-<em>n>-hexyl/13-<em>n>-octyl berberine and palmatine analogues might be valuable source for new potent anticancer drug candidates.

  7. ALTERAÇÃO DE UM LAYOUT FUNCIONAL PARA LAYOUT CELULAR MOTIVADO PELOS FUNDAMENTOS DA MANUFATURA ENXUTA: ESTUDO DE CASO EM UMA INDÚSTRIA DE TRANSFORMADORES

    Directory of Open Access Journals (Sweden)

    Felipe Crisóstomo Gadelha

    2015-12-01

    Full Text Available O presente trabalho apresenta o estudo de uma alteração de layout, de funcional para celular, motivado pelos fundamentos da manufatura enxuta. Tendo como objetivo verificar os benefícios de se utilizar a manufatura celular com fluxo enxuto (contínuo, apresenta como metodologia um estudo de caso, pós-fato, em uma indústria de transformadores, onde a mudança foi realizada. Para fundamentar o estudo, apresenta revisão dos temas: Sistema de Manufatura Enxuta e layout industrial, para, em seguida, trazer os dados apresentados por esta indústria, ainda em um arranjo físico funcional, antes da alteração, e, em seguida, nas células de manufatura com um fluxo enxuto, após a alteração, e realizar uma comparação entre ambos. Os resultados obtidos desta comparação apresentam ganhos como aumento de produção, em 20%, e produtividade, em 56%, redução de lead time, em 67%, mão de obra direta, em 30%, tempo de processamento, em 20%, e área fabril, em 24%, dentre outros, evidenciando os benefícios que a utilização de um layout celular e Manufatura Enxuta proporcionam.

  8. Brazilian industrial growth financing: are the sources adequate to the sectoral technological regimes?

    Directory of Open Access Journals (Sweden)

    Flávio de Oliveira Gonçalves

    2010-07-01

    Full Text Available This work aims to analyzing the relationship between the type of financing resources and growth of the manufacturing sectors, grouped according to technological regimes, and to relate this relationship to its degree of adequacy of the sources to the sectoral technological opportunities. Thus, panel data analysis was performed in order to asses the relationship between financial deepening and innovation. We gathered detailed data for each industrial sector, grouped according to its technological regimes, and ran a Granger causality test in panels. Results found report that more innovation-intense sectors, which boosted aggregated economic growth rather steeply, present inadequate financing dynamic to its own growth. Therefore, considering sectors with high technological opportunities and strong innovation persistence, it was observed a bank-based type of financing, whilst the ideal for its growth would be the market-based one. On the other hand, less innovative sectors are found in better situation of financing and better growth conditions. These (non-satisfactory requirements present themselves in (higher lower growth rates and industrial production share.O objetivo do trabalho é analisar a relação entre o tipo de financiamento e o crescimento dos diversos setores da indústria de transformação e ligá-la ao maior ou menor grau de adequação das fontes às oportunidades tecnológicas setoriais. Para tanto, faz-se uma avaliação em painel de dados da relação entre aprofundamento financeiro e inovação, utilizando dados desagregados para os setores industriais, agrupados de acordo com regimes tecnológicos, fazendo um exercício de Granger-causalidade em painéis. Os resultados encontrados mostram que os setores mais inovativos, que impulsionariam o crescimento da economia agregada de forma mais acentuada, apresentam dinâmicas de financiamento inadequadas ao seu crescimento. Assim, para setores com altas oportunidades tecnológicas e

  9. Isojacareubin from the Chinese Herb <em>Hypericum japonicumem>: Potent Antibacterial and Synergistic Effects on Clinical Methicillin-Resistant <em>Staphylococcus aureusem> (MRSA

    Directory of Open Access Journals (Sweden)

    Gen-Chun Wang

    2012-07-01

    Full Text Available Through bioassay-guided fractionation of the extracts from the aerial parts of the Chinese herb <em>Hypericum japonicumem> Thunb. Murray, Isojacareubin (ISJ was characterized as a potent antibacterial compound against the clinical methicillin-resistant S<em>taphylococcus aureusem> (MRSA. The broth microdilution assay was used to determine the minimal inhibitory concentrations (MICs and minimal bactericidal concentrations (MBCs of ISJ alone. The results showed that its MICs/MBCs ranged from 4/16 to 16/64 μg/mL, with the concentrations required to inhibit or kill 50% of the strains (MIC50/MBC50 at 8/16 μg/mL. Synergistic evaluations of this compound with four conventional antibacterial agents representing different types were performed by the chequerboard and time-kill tests. The chequerboard method showed significant synergy effects when ISJ was combined with Ceftazidime (CAZ, Levofloxacin (LEV and Ampicillin (AMP, with the values of 50% of the fractional inhibitory concentration indices (FICI50 at 0.25, 0.37 and 0.37, respectively. Combined bactericidal activities were also observed in the time-kill dynamic assay. The results showed the ability of ISJ to reduce MRSA viable counts by log10CFU/mL at 24 h of incubation at a concentration of 1 × MIC were 1.5 (LEV, additivity, 0.92 (CAZ, indifference and 0.82 (AMP, indifference, respectively. These <em>in vitroem> anti-MRSA activities of ISJ alone and its synergy with conventional antibacterial agents demonstrated that ISJ enhanced their efficacy, which is of potential use for single and combinatory therapy of patients infected with MRSA.

  10. MARKETING VERDE NAS OPERAÇÕES DE AGENTES DE LOGÍSTICA DE DISTRIBUIÇÃO: ESTUDO DE CASO EM EMPRESA DE BASE TECNOLÓGICA

    OpenAIRE

    Tiago Hennemann Hilario da Silva; Alessio Bessa Sarquis; Vilmar Antonio Gonçalves Tondolo

    2013-01-01

    Este estudo tem por objetivo explorar a utilização do marketing verde nas operações de agentes da logística do processo de distribuição. O referencial teórico utilizado foi baseado em duas subáreas de conhecimento: marketing verde em serviços e cadeia de suprimentos verde. O objeto de estudo foi uma organização de médio porte do ramo de tecnologia e fornecedora de soluções em automação industrial. A coleta de dados empíricos envolveu um estudo de caso único, a pesquisa do tipo exploratória qu...

  11. Prevalência e fatores associados à obesidade abdominal em pacientes em hemodiálise em Goiânia - GO

    Directory of Open Access Journals (Sweden)

    Ana Tereza Vaz de Souza Freitas

    2013-12-01

    Full Text Available INTRODUÇÃO: A presença de excesso de peso, especialmente obesidade visceral, contribui para o maior risco de complicações metabólicas e cardiovasculares em pacientes com doença renal crônica. OBJETIVO: Determinar a prevalência e os fatores associados à obesidade abdominal em pacientes em hemodiálise (HD. MÉTODOS: Estudo transversal com 344 pacientes maiores de 18 anos. A obesidade abdominal foi definida pela circunferência da cintura > 94 cm nos homens e > 80 cm nas mulheres. As variáveis independentes envolveram aspectos socioeconômicos, demográficos, hábitos de vida, tempo em HD, consumo alimentar e índice de massa corporal (IMC. A análise dos fatores associados foi realizada por regressão de Poisson múltipla, permanecendo no modelo final as variáveis com p 25 kg/m². Nos homens, a classe econômica D/E também permaneceu associada à obesidade abdominal, p < 0,05. CONCLUSÃO: Observou-se alta prevalência de obesidade abdominal em pacientes em hemodiálise. Idade superior a 40 anos, classes econômicas mais baixas, ingestão proteica inferior ao recomendado e excesso de peso foram associados à obesidade abdominal.

  12. Resfriamento de carcaças de frango por imersão em água e ar forçado

    OpenAIRE

    Rodrigues, Luiz Gustavo Gonçalves

    2013-01-01

    Tese (doutorado) - Universidade Federal de Santa Catarina, Centro Tecnológico, Programa de Pós-Graduação em Engenharia de Alimentos, Florianópolis, 2013. O Brasil e principalmente o estado de Santa Catarina ocupam uma posição de destaque no mercado internacional com respeito à produção e a exportação de carne de frango. Em uma linha de processamento industrial, a etapa de resfriamento de carcaças de frango até a temperatura central do músculo peitoral atingir 4 °C, é de suma importância pa...

  13. Lipase catalyzed ester synthesis for food processing industries

    Directory of Open Access Journals (Sweden)

    Aravindan Rajendran

    2009-02-01

    Full Text Available Lipases are one of the most important industrial biocatalyst which catalyzes the hydrolysis of lipids. It can also reverse the reaction at minimum water activity. Because of this pliable nature, it is widely exploited to catalyze the diverse bioconversion reactions, such as hydrolysis, esterification, interesterification, alcoholysis, acidolysis and aminolysis. The property to synthesize the esters from the fatty acids and glycerol promotes its use in various ester synthesis. The esters synthesized by lipase finds applications in numerous fields such as biodiesel production, resolution of the recemic drugs, fat and lipid modification, flavour synthesis, synthesis of enantiopure pharmaceuticals and nutraceuticals. It plays a crucial role in the food processing industries since the process is unaffected by the unwanted side products. Lipase modifications such as the surfactant coating, molecular imprinting to suit for the non-aqueous ester synthesis have also been reported. This review deals with lipase catalyzed ester synthesis, esterification strategies, optimum conditions and their applications in food processing industries.Lipases são catalizadores industriais dos mais importantes, os quais catalizam a hidrólise de lipídeos. Também podem reverter a reação a um mínimo de atividade de água. Devido sua natureza flexível, é amplamente explorada para catalizar uma diversidade de reações de bioconversão como hidrólise, esterificação, interesterificação, alcoólise, acidólise e aminólise. A propriedade de síntese de esteres a partir de ácidos graxos e glicerol promoveu seu uso em várias sínteses de esteres. Os esteres sintetizados por lipases encontram aplicação em numerosos campos como a produção de biodiesel, resolução de drogas racêmicas, modificação de gorduras e lipídios, sintese de aromas, síntese de produtos farmacêuticos enantiopuro e nutracêuticos. As lipases possuem um papel crucial nas indústrias de

  14. Variabilità microsatellitare in popolazioni italiane di martora, <em>Martes martesem>

    Directory of Open Access Journals (Sweden)

    Licia Colli

    2003-10-01

    Full Text Available La martora, <em>Martes martesem>, è un mustelide storicamente presente su gran parte del territorio italiano, soprattutto dove siano presenti foreste mature altamente strutturate e ricche di risorse. Nel corso dei decenni passati, cause quali la deforestazione con conseguente frammentazione dell'habitat, la caccia e la persecuzione da parte dell'uomo hanno portato ad un sensibile declino sia nel numero d'individui sia di popolazioni in tutta l'Europa. Frammentazione degli areali e diminuzione del numero di soggetti costituiscono le cause principali di un limitato flusso genico con conseguente formazione di popolazioni isolate di martora e perdita di variabilità genetica (Kyle <em>et al.em>, 2003. Per queste ragioni la martora risulta attualmente tutelata secondo quanto previsto dalla Convenzione di Berna (appendice III e dalla Direttiva europea 92/43/CEE "Habitats & Species". Di fronte a prospettive di tipo conservazionistico, diventa necessario disporre di metodologie per la valutazione della variabilità residua nella specie a livello d'individui e di popolazioni. Secondo numerosi Autori, i microsatelliti costituiscono marcatori molto efficaci nella descrizione della struttura genetica e della storia demografica di specie (Beaumont & Bruford, 1999; Linares, 1999. Il presente lavoro propone i risultati ottenuti attraverso il confronto di due campioni costituiti da individui di <em>Martes martesem> provenienti dalla Sardegna (25 esemplari e dal territorio italiano (6 esemplari. L'analisi è stata condotta a livello di 7 loci microsatellitari dinucleotidici polimorfici. Il valore di FST calcolato dal confronto dei due gruppi è risultato pari a 0,102 e ricade nel <em>range> di variazione identificato di recente in popolazioni nord-europee di martora (Kyle <em>et al.em>, 2003. L'analisi della varianza molecolare (AMOVA, condotta a due livelli gerarchici, ha permesso in particolare di ripartire la varianza del campione

  15. Retratos em movimento.

    Directory of Open Access Journals (Sweden)

    Luiz Carlos Oliveira Junior

    Full Text Available resumo O artigo aborda aspectos da relação do cinema com a arte do retrato. Buscamos, em primeiro lugar, uma definição estética do que seria um retrato cinematográfico, sempre em tensão com os critérios formais e padrões estilísticos que historicamente constituíram o retrato pictórico. Em seguida, relacionamos essa questão com a importância que se deu à representação do close-up de rosto nas primeiras décadas do cinema, quando foi atribuído aos filmes um papel inédito no estudo da fisionomia e da expressão facial. Por fim, apresentamos exemplos de autorretratos na pintura e no cinema para expor a forma como a autorrepresentação põe em crise as noções de subjetividade e identidade em que a definição clássica do retrato se apoiava.

  16. Modelo de autoavaliação para suporte à gestão organizacional: experimentação em indústria do segmento de malharia Model of self-evaluation to support organizational performance: experiment performed in knitted fabric textile industry

    Directory of Open Access Journals (Sweden)

    Gisele Alvim de Rezende Vilas Boas

    2013-06-01

    Full Text Available Este trabalho apresenta um modelo para suporte à gestão organizacional com foco em autoavaliação fundamentado nos critérios dos principais prêmios de excelência em gestão internacionais e do Brasil. Esta proposta teve por finalidade permitir avaliações personalizadas de desempenho do sistema de gestão e da importância para a organização das práticas de excelência em gestão preconizadas por tais prêmios. O método de pesquisa constituiu-se em fundamentação teórica, análise comparativa de três dos principais prêmios de excelência em gestão internacionais e do Brasil e experimentação do modelo proposto em uma indústria do segmento de malharia. A aplicação do modelo proposto possibilitou uma avaliação personalizada do desempenho do sistema de gestão da organização objeto de estudo e, também, da importância atribuída às práticas de excelência em gestão abordadas nos critérios. O contraste entre desempenho e importância permitiu a identificação de pontos organizacionais prioritários de melhoria da organização.This project aims to present a sample to support organizational management focusing on self-evaluation based on the criteria of the most important international and national excellence awards in management. The objective of the sample was to allow for customized evaluations of performance regarding the management system as well as evaluations of the importance of management excellence practices to the company preconized by those awards. The research methodology was based on a theoretical foundation, comparative analysis of the three main Excellence Awards in Management in Brazil, and on the experiment of the sample proposed in a knitted fabric textile industry. The sample proposed has allowed for a customized performance evaluation of the management system of the company used as the object of study, and the importance of the management excellence practices involved in the criteria. The contrast

  17. Modelo de autoavaliação para suporte à gestão organizacional: experimentação em indústria do segmento de malharia Model of self-evaluation to support organizational performance: experiment performed in knitted fabric textile industry

    Directory of Open Access Journals (Sweden)

    Gisele Alvim de Rezende Vilas Boas

    2012-01-01

    Full Text Available Este trabalho apresenta um modelo para suporte à gestão organizacional com foco em autoavaliação fundamentado nos critérios dos principais prêmios de excelência em gestão internacionais e do Brasil. Esta proposta teve por finalidade permitir avaliações personalizadas de desempenho do sistema de gestão e da importância para a organização das práticas de excelência em gestão preconizadas por tais prêmios. O método de pesquisa constituiu-se em fundamentação teórica, análise comparativa de três dos principais prêmios de excelência em gestão internacionais e do Brasil e experimentação do modelo proposto em uma indústria do segmento de malharia. A aplicação do modelo proposto possibilitou uma avaliação personalizada do desempenho do sistema de gestão da organização objeto de estudo e, também, da importância atribuída às práticas de excelência em gestão abordadas nos critérios. O contraste entre desempenho e importância permitiu a identificação de pontos organizacionais prioritários de melhoria da organização.This project aims to present a sample to support organizational management focusing on self-evaluation based on the criteria of the most important international and national excellence awards in management. The objective of the sample was to allow for customized evaluations of performance regarding the management system as well as evaluations of the importance of management excellence practices to the company preconized by those awards. The research methodology was based on a theoretical foundation, comparative analysis of the three main Excellence Awards in Management in Brazil, and on the experiment of the sample proposed in a knitted fabric textile industry. The sample proposed has allowed for a customized performance evaluation of the management system of the company used as the object of study, and the importance of the management excellence practices involved in the criteria. The contrast

  18. Failure time series prediction in industrial maintenance using neural networks; Previsao de series temporais de falhas em manutencao industrial usando redes neurais

    Energy Technology Data Exchange (ETDEWEB)

    Torres Junior, Rubiao G.; Machado, Maria Augusta S. [Instituto Brasileiro de Mercado de Capitais (IBMEC), Rio de Janeiro, RJ (Brazil); Souza, Reinaldo C. [Pontificia Univ. Catolica do Rio de Janeiro, RJ (Brazil)

    2005-07-01

    The objective of this work is the application of two failure prediction models in industrial maintenance with the use of Artificial Neural Networks (ANN). A characteristic of the modern industrial environment is a strong competition which leads companies to search for costs minimization methods. Thus, dada gathering and maintenance dada treatment becomes extremely important in this scenario for it aims the equipment and plant systems real repair necessity. Therefore, the objective becomes the widening of the system's full activity in a continuous manner, in the required period, without problems in their integrating parts. A daily time series is modeled based on maintenance interventions pauses dada from a five years period derived form many productive systems in the finalization areas of PETROFLEX Ind. and Com. S.A. Thus, the purpose is to introduce models based on neural networks and verify its system's pauses prediction capacity, so as to intervene with adequate timing before the system fails, extend the operational period and consequently increase its availability. The results obtained in this work demonstrate the employment of Neural Networks in the prediction of pauses in PETROFLEX industrial area maintenance. The ANN's prediction capacity in a group of dada with strong non-linear component where other statistical techniques have shown little efficient has also been confirmed. Discover neural models to predict failure systems time series has enable a breakthrough in the research field, especially due to the market demand. It's no doubt a technique that will evolve in the industrial maintenance area financing important managing decision. Prediction techniques, such as the ones illustrated in this study, work side by side maintenance planning and if carefully implemented and followed up can in the medium run supply a substantial increase in the available operational hours. (author)

  19. Winter food of the fox <em>Vulpes vulpesem> in the Province of Cuneo (North-Western Italy / Alimentazione invernale della Volpe <em>Vulpes vulpesem> nell'Albese (Provincia di Cuneo

    Directory of Open Access Journals (Sweden)

    Paolo Debernardi

    1991-07-01

    Full Text Available Abstract The diet of the Fox <em>Vulpes vulpesem> was studied by the analysis of 157 gastric contents coming from hilly areas of the Province of Cuneo. Samples were gathered during January-March of the years '86 (N. 41, '87 (N. 72 and '88 (N. 44. The mean percentage of frequency was determined for the following feeding categories: Fruits (26.1%, Other vegetable components (19.7%, Insects (2.5%, Wild birds (11.5%, Insectivores and Rodents (42.7%, <em>Lepus capensisem> (13.4%, Indeterminate Lagomorphs (17.2%, Domestic animals (59.2% and Other (2.5%. The diet is analysed in relation to some available trophic resources (dumps, restoking of hares and of pheasants. Riassunto Vengono presentati i dati dell'analisi di 157 contenuti gastrici di <em>Vulpes vulpesem>, provenienti da aree collinari della provincia di Cuneo; i campioni si riferiscono ai primi tre mesi delle annate '86 (N. 41, '87 (N. 72 e '88 (N. 44. Sono state determinate le frequenze percentuali delle seguenti categorie alimentari: Frutti (26,1%, Altre componenti vegetali (19,7%, Insetti (2,5%, Uccelli selvatici (11,5%, Insettivori e Roditori (42,7%, <em>Lepus capensisem> (13,4%, Lagomorfi indeterminati (17,2%, Animali domestici (59,2% e Altro (2,5%. La dieta viene esaminata in relazione ad alcuni aspetti legati alle disponibilità trofiche del territorio (presenza di discariche, ripopolamenti di selvaggina.

  20. Abordagens para aplicação da estratégia de postponement: estudo multicaso em empresas da indústria de alimentos Approaches for implementation of the postponement strategy: a multicase study in the food industry

    Directory of Open Access Journals (Sweden)

    Karine Araújo Ferreira

    2013-06-01

    Full Text Available O propósito deste artigo foi investigar a aplicação prática do postponement em empresas alimentícias brasileiras e identificar as abordagens (passos para aplicação desta estratégia nestas empresas. Além da maior discussão sobre o tema, a principal motivação para este trabalho é o estudo desta estratégia em um setor em que o tema é ainda pouco explorado. Foram apresentados seis estudos de caso em empresas alimentícias do segmento de fabricação de conservas de frutas, tais como processadoras de tomate e laranja. Este trabalho traz duas contribuições principais. A primeira é a apresentação de uma estrutura conceitual, com as principais abordagens para a implementação do postponement obtidas da literatura, que pode e deve ser adequada para diferentes setores da indústria. A segunda é uma primeira adequação desse quadro para empresas da indústria alimentícia, especificamente empresas processadoras de tomates e produtoras de suco de laranja. Dentre as principais conclusões deste trabalho, pode-se destacar que a aplicação do postponement é uma prática cada vez mais frequente no segmento investigado e tem transformado as relações entre empresas. Adicionalmente, foi verificado, que nenhuma das empresas estudadas apresentava uma estrutura formalizada para aplicação da estratégia de postponement, sendo sua implantação baseada apenas na experiência dos seus gestores.The purpose of this article was to investigate the implementation of the postponement strategy of in Brazilian companies in the food industry and to identify approaches (steps for implementing this strategy in these companies. In addition to the broader discussion on this topic, the main motivation for conducting this research is the study of this strategy in a sector where this topic has still been under-addressed. Six case studies were conducted in and fruit and vegetable canning companies, such as tomato and orange processing companies. This study

  1. Efeito de práticas de manejo sobre o rendimento de grãos e a qualidade industrial dos grãos em arroz irrigado Effects of management practices on rice tield grain and hillquality

    Directory of Open Access Journals (Sweden)

    Luciano Pasqualoto Canellas

    1997-08-01

    Full Text Available Foi desenvolvido um experimento a campo num gleissolo em Casemiro de Abreu, RJ, de outubro de 1993 a fevereiro de 1994, com o objetivo de verificar o efeito do uso de calcário em linha de semeadura, de cultivares, densidades de semeadura e épocas de colheita sobre a produção e a qualidade industrial do arroz. Foram utilizadas duas cultivares de arroz (BR-IRGA 412 e BR-IRGA 409, duas doses de calcário aplicadas na linha de semeadura (0 e 200kg ha-1 e três densidades de semeadura (100, 200 e 300kg de sementes ha-1, colhidas aos 140, 147 e 154 dias após a semeadura. O uso do calcário proporcionou aumento de 25% no rendimento de grãos da cultivar BR-IRGA 409. A qualidade industrial do arroz foi influenciada pela época de colheita, sendo a mais indicada quando o teor de umidade do grão se encontra entre 17,5 - 22%.The purpose of the research was to study the use of liming, seeding density of two paddy rice cultivars and harvest time with rice yield and mill quality. The experiment was carried out during 1993/94 growing season in Casemiro de Abreu (RJ, Brazil. The two rice cultivars used were BR-IRGA 409 and BR-IRGA 412, two of limestone doses (0 and 200kg ha-1 and three seeding densities (100, 200 and 300kg ha-1 were distributed in a completely randomized block design. The use of liming and variation of seeding density did not affect rice quality. The moisture content of the rice grains that resulted in highest quality at harvest was between 17,5-22%.

  2. Caracterização química de sucos produzidos em escala industrial com novas variedades brasileiras de uva cultivadas no nordeste do Brasil

    OpenAIRE

    Lima, Marcos dos Santos

    2014-01-01

    Tese (doutorado) - Universidade Federal de Santa Catarina, Centro Tecnológico, Programa de Pós-Graduação em Engenharia de Alimentos, Florianópolis, 2014. A produção de suco de uva no Brasil tem aumentado a cada ano, pois apenas no Rio Grande do Sul, maior estado produtor de uvas e derivados, a produção de suco passou de 126,9 milhões de litros em 2008 para 220 milhões de litros em 2012.Esses números são bastante relevantes, pois a produção mundial de sucos de uva está estimada entre 11 e 1...

  3. Imobilização de lipases produzidas por fermentação em estado sólido utilizando Penicillium verrucosum em suportes hidrofóbicos Immobilization of lipases produced by solid state fermentation from Penicillium verrucosum on hydrophobic supports

    Directory of Open Access Journals (Sweden)

    Silvana Menoncin

    2009-06-01

    Full Text Available O principal interesse em imobilizar uma enzima é obter um biocatalisador com atividade e estabilidade que não sejam afetadas durante o processo, em comparação à sua forma livre. Aliado ao potencial biotecnológico que as lipases apresentam, a aplicação destas em nível industrial requer a investigação de técnicas viáveis para reutilização e aumento da estabilidade, conferindo relevância aos processos de imobilização. Neste trabalho investigou-se a imobilização da lipase produzida por fermentação em estado sólido utilizando Penicillium verrucosum em dois suportes hidrofóbicos; Accurel EP 1000 e Carvão Ativo. Para a imobilização das lipases foi adicionado 1 g de suporte a 50 mL de uma solução enzimática, estes permaneceram em contato por 2 horas em banho de gelo. Depois de decorrido este tempo, a solução foi filtrada e a enzima imobilizada colocada em dessecador por 48 horas e então feita a medida da atividade lipásica, proteína e cálculo da atividade específica. Através dos resultados obtidos, verificou-se que lipase imobilizada em carvão ativo apresentou valores de atividade específica superiores aos obtidos quando da utilização de Accurel EP 1000 como suporte. Utilizando carvão ativo como suporte, a atividade específica foi de 1533422,5 U/mg de proteína, rendimento de 30,4% e retenção de 382,5%.The major interest in the immobilization of enzymes is obtaining a biocatalyst with activity and stability that are not affected during the process when compared to the free enzyme. The application of lipases in industries requires the study of techniques suitable for reuse and stability increase such as immobilization strategies. This work studied the immobilization of lipases produced by solid state fermentation from Penicillium verrucosum using two hydrophobic supports: Accurel EP 1000 and activated carbon. For the lipase immobilization, 1 g of support was added to 50 mL of an enzyme solution and kept for 2

  4. Caratterizzazione genetica di alcune popolazioni di cinghiale (<em>Sus scrofaem> dell'Italia meridionale

    Directory of Open Access Journals (Sweden)

    M.F. Caliendo

    2003-10-01

    Full Text Available In Italia il Cinghiale ha subito varie oscillazioni numeriche per immissioni d?esemplari provenienti soprattutto dall'est europeo o da paesi vicini (Massei & Toso, 1993 e incrocio con esemplari di maiale domestico, allevato allo stato brado o semi brado in molte zone d'Italia (Apollonio <em>et al.em>, 1988. Questi fattori sono stati responsabili anche di un impoverimento genetico della forma autoctona italiana <em>Sus scrofa meridionalisem> e <em>majori> che sembrano persistere solo in Sardegna e Maremma (Apollonio <em>et al.em>, 1988. Tra le riserve in cui si ritiene possano trovarsi popolazioni ancora integre, figura la tenuta presidenziale di Castelporziano (Roma. Prendendo spunto da questo lavoro, con il nostro contributo riportiamo i risultati, a livello genetico, della ibridazione con il maiale da parte di cinghiali della Campania, basato sul DNA microsatellite di 4 loci polimorfi. Sono state studiate 9 popolazioni (allevate e libere, usando per riferimenti maiali allo stato brado e cinghiali di Castelporziano. Dall?analisi delle frequenze alleliche è stato eseguito il <em>test di assignmentem> (implementato in una sub routine del software Arlequin 2.0 che individua la possibile origine di un individuo, rispetto ad una rosa di probabili popolazioni di riferimento (Paetkau <em>et al.em>, 1998. Con i risultati del test di assignment si è costruito il grafico <em>log-log genotypeem>, rappresentato da un piano individuato dalle due variabili di riferimento (cinghiale e maiale brado. Le popolazioni esaminate evidenziano una generalizzata distribuzione a cavallo tra i due riferimenti con individui geneticamente simili al cinghiale ed altri al maiale. Questa ripartizione simmetrica è molto evidente nel caso dei cinghiali catturati a Punta Licosa e in quelli dell?allevamento di Polla. La distribuzione dei genotipi sul piano è spesso dispersa, ad eccezione dei cinghiali della Valle del Vento e quelli di Monteverde (individui

  5. Pré-resfriamento em água de lichia 'B3' mantida em armazenamento refrigerado

    OpenAIRE

    del Aguila,Juan Saavedra; Hofman,Peter; Campbell,Terrence; Marques,José Roberto; Heiffig-del Aguila,Lília Sichmann; Kluge,Ricardo Alfredo

    2009-01-01

    Este experimento visou a estudar o efeito de diferentes temperaturas e tempos de pré-resfriamento em água sobre a qualidade de lichias 'B3', após a frigoconservação. Os tratamentos foram: T1 = controle (sem pré-resfriamento); T2 = imersão por cinco minutos em água a 2,5°C; T3 = imersão por 10 minutos em água a 2,5°C; T4 = imersão por 20 minutos em água a 2,5°C; T5 = imersão por sete minutos em água a 6°C; T6 = imersão por 20 minutos em água a 8°C e T7 = imersão por 10 minu...

  6. Implementação de um processo industrial de coloração de granito

    OpenAIRE

    Gonçalves, Nadine Isabel da Silva

    2014-01-01

    O presente estágio foi desenvolvido na Britafiel. Um dos projectos em que a Empresa se encontra envolvida é o STOCO, pretendendo implementar à escala industrial um processo de coloração de pedra granítica natural para fins decorativos. Foi neste projecto que se enquadrou o estágio. O tema do estágio centra-se no processo de coloração de granito tendo como principal foco a implementação de um processo industrial de produção de granito colorido. O projecto STOCO nasce da necessidade de compl...

  7. Antioxidative Characteristics of <em>Anisomeles indicaem> Extract and Inhibitory Effect of Ovatodiolide on Melanogenesis

    Directory of Open Access Journals (Sweden)

    Li-Ling Chang

    2012-05-01

    Full Text Available The purpose of the study was to investigate the antioxidant characteristics of <em>Anisomeles indicaem> methanol extract and the inhibitory effect of ovatodiolide on melanogenesis. In the study, the antioxidant capacities of <em>A. indicaem> methanol extract such as DPPH assay, ABTS radical scavenging assay, reducing capacity and metal ion chelating capacity as well as total phenolic content of the extract were investigated. In addition, the inhibitory effects of ovatodiolide on mushroom tyrosinase, B16F10 intracellular tyrosinase and melanin content were determined spectrophotometrically. Our results revealed that the antioxidant capacities of <em>A. indicaem> methanol extract increased in a dose-dependent pattern. The purified ovatodiolide inhibited mushroom tyrosinase activity (IC50 = 0.253 mM, the compound also effectively suppressed intracellular tyrosinase activity (IC50 = 0.469 mM and decreased the amount of melanin (IC50 = 0.435 mM in a dose-dependent manner in B16F10 cells. Our results concluded that <em>A. indicaem> methanol extract displays antioxidant capacities and ovatodiolide purified from the extract inhibited melanogenesis in B16F10 cells. Hence, <em>A. indicaem> methanol extract and ovatodiolide could be applied as a type of dermatological whitening agent in skin care products.

  8. International EMS Systems

    DEFF Research Database (Denmark)

    Langhelle, Audun; Lossius, Hans Morten; Silfvast, Tom

    2004-01-01

    exist, however, especially within the ground and air ambulance service, and the EMS systems face several challenges. Main problems and challenges emphasized by the authors are: (1) Denmark: the dispatch centres are presently not under medical control and are without a national criteria based system......Emergency medicine service (EMS) systems in the five Nordic countries have more similarities than differences. One similarity is the involvement of anaesthesiologists as pre-hospital physicians and their strong participation for all critically ill and injured patients in-hospital. Discrepancies do....... Access to on-line medical advice of a physician is not available; (2) Finland: the autonomy of the individual municipalities and their responsibility to cover for primary and specialised health care, as well as the EMS, and the lack of supporting or demanding legislation regarding the EMS; (3) Iceland...

  9. Locas al Rescate: The Transnational Hauntings of Queer <em>Cubanidad>

    Directory of Open Access Journals (Sweden)

    Lázaro Lima

    2011-12-01

    Full Text Available

    “Locas al Rescate: The Transnational Hauntings of Queer <em>Cubanidad>” (originally published in <em>Cuba Transnationalem> offers a significant contribution both to transnational American Studies and to gender studies. In telling the insider story of the alternative identity formation, practices, and forms of “rescue” initiated by the affective activism of the Cuban American society in drag in 1990s Miami/South Beach, Lima resuscitates the liberatory gestures of a subculture defined by its pursuit of its own acceptance, value, and freedom. With their aesthetic and political life on a raft, the gay micro-communities inside Cuban America asserted their own islandic space, Lima observes, performing “takeovers” in and of parks and bars and beaches—creating a post-Habermasian sphere of public activism focused on private parts, saving themselves from AIDS, from the disaffection and disaffiliation of the right-wing Cuban immigrant community, and from the failure of their own yearning to belong, to be wanted, to be embodied as the figure of their compelling <em>Cubanidad>. Against the hegemony of the invented collective politics of the sacrificing immigrants whose recognition of the queer side of being (of a being constituted by identity loss is yet to come, Lima suggests a spectral return—a personal and transnational reckoning of those whose lives the dream of freedom drowned.

  10. Estudo da precipitação com etanol de xilanases de complexos enzimáticos produzidos por Aspergillus niger em fermentação no estado sólido e fermentação submersa

    OpenAIRE

    Max Adilson Lima Costa

    2016-01-01

    Resumo: Estudos de precipitação de xilanases produzidas por diferentes microrganismos em fermentação em estado sólido ou fermentação submersa revelaram diferenças quantitativas e qualitativas entre os produtos obtidos. No caso da precipitação de xilanase com etanol, alta recuperação de atividade obtida apenas em concentrações elevadas de solvente. Devido à relevância das xilanases no cenário industrial, especialmente em um contexto biorefinaria, é importante caracterizar melhor a produção e a...

  11. Incidência de fumonisina B1, aflatoxinas B1, B2, G1 e G2, ocratoxina A e zearalenona em produtos de milho Occurrence of fumonisin B1, aflatoxins B1, B2, G1, and G2, ochratoxin A and zearalenone in corn products

    Directory of Open Access Journals (Sweden)

    Luciane Mie Kawashima

    2006-09-01

    Full Text Available Levantamentos de ocorrência de micotoxinas em alimentos foram realizados nas últimas duas décadas nas regiões Sudeste e Sul do Brasil. Levantamentos em alimentos comercializados em outras regiões têm-se limitado a aflatoxinas em amendoim e castanhas do Brasil. O presente trabalho pesquisou a presença de fumonisina B1, aflatoxinas B1, B2, G1 e G2, ocratoxina A e zearalenona em 74 amostras de produtos a base de milho adquiridas no comércio da cidade de Recife, PE, durante o período de 1999 a 2001. Fumonisina B1 foi determinada por cromatografia líquida de alta eficiência com detecção por fluorescência e as demais toxinas foram determinadas por cromatografia em camada delgada. Fumonisina B1 foi encontrada em 94,6% das amostras em concentrações variando de 20 a 8600 µg/kg. Apenas 5 amostras continham aflatoxina B1 e o teor máximo encontrado foi 20 µg/kg. Duas amostras ultrapassaram o limite de 20 µg/kg para a somatória das aflatoxinas B1, B2, G1 e G2 (farinha de milho pré-cozida com 21,5 µg/kg e quirera (xerém com 23,3 µg/kg. As aflatoxinas G1 e G2, ocratoxina A e zearalenona não foram detectadas em nenhuma das amostras. Todas as amostras contaminadas com aflatoxinas também apresentaram fumonisina B1.Research concerning the presence of mycotoxin in food has been conducted in the Southwest and South regions of Brazil over the last two decades. Research in other regions has been limited to aflatoxin in peanuts and Brazil nuts. The aim of this work is to study the presence of fumonisin B1, aflatoxins B1, B2, G1, and G2, ochratoxin A and zearalenone in 74 samples of corn products acquired in shops and food markets in the city of Recife (PE from 1999 to 2001. Fumonisin B1 was determined by high performance liquid chromatography and fluorescence was detected. The other toxins were determined by thin layer chromatography. Fumonisin B1 was found in 94.6% of the samples in levels from 20 to 8600 µg/kg. Only 5 samples contained

  12. SD118-Xanthocillin X (1, a Novel Marine Agent Extracted from <em>Penicillium> communeem>, Induces Autophagy through the Inhibition of the MEK/ERK Pathway

    Directory of Open Access Journals (Sweden)

    Caiguo Huang

    2012-06-01

    Full Text Available A compound named SD118-xanthocillin X (1 (C18H12N2O2, isolated from <em>Penicillium> <em>commune> in a deep-sea sediment sample, has been shown to inhibit the growth of several cancer cell lines <em>in vitroem>. In the present study, we employed a growth inhibition assay and apoptotic analysis to identify the biological effect and detailed mechanism of SD118-xanthocillin X (1 in human hepatocellular carcinoma (HepG2 cells. SD118-xanthocillin X (1 demonstrated a concentration-dependent inhibitory effect on the growth of HepG2 cells and caused slight cellular apoptosis and significantly induced autophagy. Autophagy was detected as early as 12 h by the conversion of microtubule-associated protein 1 light chain 3 (LC3-I to LC3-II, following cleavage and lipid addition to LC3-I. The pharmacological autophagy inhibitor 3-methyladenine largely attenuates the growth inhibition and autophagic effect of SD118-xanthocillin X (1 in HepG2 cells. Our data also indicated that the autophagic effect of SD118-xanthocillin X (1 occurs via the down-regulation of the MEK/ERK signaling pathway and the up-regulated class III PI3K/Beclin 1 signaling pathway.

  13. Waste Stream Analysis of Two United States Army Dining Facilities

    Science.gov (United States)

    1993-01-01

    BUTTER HOMINY GRITS 30 12 0 3 004700 HOME FRIED POTATOES 40 ti a 0 004700 HOME FRIED POTATOES 40 50 0 4 C00590 COFFEE (AUTOMATIC URN) 150 50 0 • S00100...tw 60 0 0 EM500 STEAMED RICE 10 4fb 0 0 06760 LYONNAISE GREEN BEANS (FR 50 ti 35 0 060700 LYONNAIS- GREEN BEANS (FR 25 20 0 0 G02702 MEXICAN CORN 25 50...0 0 002702 MEXICAN CORN 50 2b 0 � COrTAGE CHEESE SALAD 2%5 50 0 6 M62600 JELLIED FRUIT COCKTAIL SA 2, 25 0 a M60466 POTATO SALAD 25 35 0 10

  14. Evaluating the Management System Approach for Industrial Energy Efficiency Improvements

    Directory of Open Access Journals (Sweden)

    Thomas Zobel

    2016-09-01

    Full Text Available Voluntary environmental management systems (EMS based on the international standard ISO 14001 have become widespread globally in recent years. The purpose of this study is to assess the impact of voluntary management systems on energy efficiency in the Swedish manufacturing industry by means of objective industrial energy data derived from mandatory annual environmental reports. The study focuses on changes in energy efficiency over a period of 12 years and includes both ISO 14001-certified companies and non-certified companies. Consideration is given to energy improvement efforts in the companies before the adoption of ISO 14001. The analysis has been carried out using statistical methods for two different industrial energy parameters: electricity and fossil fuel consumption. The results indicate that ISO 14001 adoption and certification has increased energy efficiency regarding the use of fossil fuel. In contrast, no effect of the management systems has been found concerning the use of electricity. The mixed results of this study are only partly in line with the results of previous studies based on perceptions of company representatives.

  15. Sorteio de domicílios em favelas em inquéritos por amostragem

    Directory of Open Access Journals (Sweden)

    Maria Cecilia Goi Porto Alves

    2011-12-01

    Full Text Available OBJETIVO: Identificar vantagens e desvantagens do uso de segmentos em relação ao sorteio feito a partir da lista completa de endereços, para o sorteio de domicílios em amostragem por conglomerados em múltiplos estágios em favelas. PROCEDIMENTOS METODOLÓGICOS: Estudo qualitativo realizado em quatro favelas sorteadas no Inquérito de Saúde do Município de São Paulo, SP, 2008, nas quais foram aplicadas as duas técnicas. Foram realizados grupos focais com pesquisadores de campo - "arroladores" e entrevistadores do inquérito. Os conteúdos das conversações foram analisados, agrupados em categorias e organizados em núcleos temáticos. ANÁLISE DOS RESULTADOS: A utilização de segmentos de domicílios foi associada a numerosas vantagens e poucas desvantagens. Entre as vantagens, constaram a rapidez e facilidade na elaboração do cadastro de endereços e na localização e identificação de domicílios na etapa de realização das entrevistas, maior segurança dos entrevistadores e da população, maior acesso aos entrevistados, maior estabilidade e maior cobertura do cadastro produzido, e menor ocorrência de erros na identificação dos domicílios sorteados. CONCLUSÕES: A construção de cadastro de domicílios por meio da criação de segmentos é vantajosa em relação à listagem completa de endereços, quando feita em favelas. Por ter se mostrado uma opção econômica e fácil de ser aplicada, constitui alternativa para a simplificação do processo de amostragem em áreas com as suas características de desorganização e adensamento de domicílios.

  16. Anti-Tumour Promoting Activity and Antioxidant Properties of Girinimbine Isolated from the Stem Bark of<em> Murraya koenigii em>S.

    Directory of Open Access Journals (Sweden)

    Yih Yih Kok

    2012-04-01

    Full Text Available Girinimbine, a carbazole alkaloid isolated from the stem bark of <em>Murraya koenigii em>was tested for the<em> in vitroem> anti-tumour promoting and antioxidant activities. Anti-tumour promoting activity was determined by assaying the capability of this compound to inhibit the expression of early antigen of Epstein-Barr virus (EA-EBV in Raji cells that was induced by the tumour promoter, phorbol 12-myristate 13-acetate. The concentration of this compound that gave an inhibition rate at fifty percent was 6.0 µg/mL and was not cytotoxic to the cells. Immunoblotting analysis of the expression of EA-EBV showed that girinimbine was able to suppress restricted early antigen (EA-R. However, diffused early antigen (EA-D was partially suppressed when used at 32.0 µg/mL. Girinimbine exhibited a very strong antioxidant activity as compared to a-tocopherol and was able to inhibit superoxide generation in the 12-<em>O>-tetradecanoylphorbol-13-acetate (TPA-induced differentiated premyelocytic HL-60 cells more than 95%, when treated with the compound at 5.3 and 26.3 µg/mL, respectively. However girinimbine failed to scavenge the stable diphenyl picryl hydrazyl (DPPH-free radical.

  17. Solution NMR Structure of Hypothetical Protein CV_2116 Encoded by a Viral Prophage Element in <em>Chromobacterium violaceumem>

    Directory of Open Access Journals (Sweden)

    Yunhuang Yang

    2012-06-01

    Full Text Available CV_2116 is a small hypothetical protein of 82 amino acids from the Gram-negative coccobacillus <em>Chromobacterium violaceumem>. A PSI-BLAST search using the CV_2116 sequence as a query identified only one hit (E = 2e−07 corresponding to a hypothetical protein OR16_04617 from <em>Cupriavidus basilensisem> OR16, which failed to provide insight into the function of CV_2116. The <em>CV_2116em> gene was cloned into the p15TvLic expression plasmid, transformed into <em>E. coliem>, and 13C- and 15N-labeled NMR samples of CV_2116 were overexpressed in <em>E. coliem> and purified for structure determination using NMR spectroscopy. The resulting high-quality solution NMR structure of CV_2116 revealed a novel α + β fold containing two anti-parallel β -sheets in the <em>N>-terminal two-thirds of the protein and one α-helix in the <em>C>-terminal third of the protein. CV_2116 does not belong to any known protein sequence family and a Dali search indicated that no similar structures exist in the protein data bank. Although no function of CV_2116 could be derived from either sequence or structural similarity searches, the neighboring genes of <em>CV_2116em> encode various proteins annotated as similar to bacteriophage tail assembly proteins. Interestingly, <em>C. violaceumem> exhibits an extensive network of bacteriophage tail-like structures that likely result from lateral gene transfer by incorporation of viral DNA into its genome (prophages due to bacteriophage infection. Indeed, <em>C. violaceumem> has been shown to contain four prophage elements and <em>CV_2116em> resides in the fourth of these elements. Analysis of the putative operon in which CV_2116 resides indicates that CV_2116 might be a component of the bacteriophage tail-like assembly that occurs in <em>C. violaceumem>.

  18. Risk-Association of <em>CYP11A1em> Polymorphisms and Breast Cancer Among Han Chinese Women in Southern China

    Directory of Open Access Journals (Sweden)

    Minying Sun

    2012-04-01

    Full Text Available Exposure to endogenous sex hormones has been reported as a risk factor for breast cancer. The <em>CYP11A1em> gene encodes the key enzyme that catalyzes the initial and rate-limiting step in steroid hormone synthesis. In this study, the associations between single nucleotide polymorphisms (SNPs in <em>CYP11A1em> and breast cancer susceptibility were examined. Six SNPs in <em>CYP11A1 em>were genotyped using the MassARRAY IPLEX platform in 530 breast cancer patients and 546 healthy controls. Association analyses based on a χ2 test and binary logistic regression were performed to determine the odds ratio (<em>OR> and 95% confidence interval (95% <em>CI> for each SNP. Two loci (rs2959008 and rs2279357 showed evidence of associations with breast cancer risk. The variant genotype C/T-C/C of rs2959008 was significantly associated with a decreased risk (age-adjusted<em> ORem>, 0.75; 95% <em>CI>, 0.58–0.96; <em>P em>= 0.023 compared with the wild-type TT. However, the homozygous TT variant of rs2279357 exhibited increased susceptibility to breast cancer (age-adjusted<em> ORem>, 1.44; 95% <em>CI>, 1.05–1.98; <em>P em>= 0.022. The locus rs2959003 also showed an appreciable effect, but no associations were observed for three other SNPs. Our results suggest that polymorphisms of <em>CYP11A1em> are related to breast cancer susceptibility in Han Chinese women of South China.

  19. APLICAÇÃO DO DMAIC PARA SOLUÇÃO DE LATAS AMASSADAS EM PROCESSOS DE UMA FABRICA DE LEITE EM PÓ / DMAIC METHODS FOR CANS CRUSHED PROBLEM SOLLUTION IN A MILK POWDER INDUSTRY

    Directory of Open Access Journals (Sweden)

    S. da S. Rêgo

    2015-06-01

    Full Text Available Problemas com latas enferrujadas, amassadas ou estufadas, podem levar a doenças como o botulismo por conterem bactérias que causam infecções alimentares. Na empresa estudada, localizada no interior de São Paulo, como em todas do segmento, o leite em pó é embalado, majoritariamente por latas de alumínio que são revestidas internamente com vernizes e outros materiais visando proteger o leite de metais provenientes do alumínio. Por conseguinte, o objetivo do estudo era a resolução do problema das latas amassadas que para tanto foi utilizado como metodologia um estudo de caso com abordagem quantitativa através do método DMAIC desenvolvida pelo Seis Sigma. Foi realizado um levantamento sobre o descarte de latas na empresa verificando-se uma perda média e, a partir desse histórico, calculada uma meta de perda. Com a meta definida calculou-se o saving anual do projeto. Durante a aplicação do DMAIC, ficou constatado que a maior taxa de perda ocorria no transporte entre a fábrica de latas e a fábrica que envasa o leite. Foram realizadas diversas ações para solucionar problemas que resultavam em latas amassadas e, nos dois primeiros meses da fase control, constatou-se perdas menores que a meta calculada, resultando em uma economia. Observou-se que o transporte entre as duas fábricas ainda é impactante no descarte de latas.

  20. Acetylcholinesterase-Inhibiting Activity of Salicylanilide <em>N>-Alkylcarbamates and Their Molecular Docking

    Directory of Open Access Journals (Sweden)

    Josef Jampilek

    2012-08-01

    Full Text Available A series of twenty-five novel salicylanilide <em>N>-alkylcarbamates were investigated as potential acetylcholinesterase inhibitors. The compounds were tested for their ability to inhibit acetylcholinesterase (AChE from electric eel (<em>Electrophorus electricusem> L.. Experimental lipophilicity was determined, and the structure-activity relationships are discussed. The mode of binding in the active site of AChE was investigated by molecular docking. All the discussed compounds expressed significantly higher AChE inhibitory activity than rivastigmine and slightly lower than galanthamine. Disubstitution by chlorine in C'(3,4 of the aniline ring and the optimal length of hexyl-undecyl alkyl chains in the carbamate moiety provided the most active AChE inhibitors. Monochlorination in C'(4 exhibited slightly more effective AChE inhibitors than in C'(3. Generally it can be stated that compounds with higher lipophilicity showed higher inhibition, and the activity of the compounds is strongly dependent on the length of the <em>N>-alkyl chain.

  1. Assessment of risk of potential exposures on facilities industries; Estimativa do risco de exposicao potencial em instalacoes industriais

    Energy Technology Data Exchange (ETDEWEB)

    Leocadio, Joao Carlos

    2007-03-15

    This work develops a model to evaluate potential exposures on open facilities of industrial radiography in Brazil. This model will decisively contribute to optimize operational, radiological protection and safety procedures, to prevent radiation accidents and to reduce human errors in industrial radiography. The probabilistic safety assessment (PSA) methodology was very useful to assess potential exposures. The open facilities of industrial radiography were identified as the scenario to be analyzed in what concerns the evaluation of potential exposures, due to their high accidents indices. The results of the assessment of potential exposures confirm that the industrial radiography in Brazil is a high-risk practice as classified by the IAEA. The risk of potential exposure was estimated to be 40,5 x 10{sup -2} per year in Brazil, having as main consequences injuries to the workers' hands and arms. In the world scene, the consequences are worst, leading to fatalities of people, thus emphasizing the high risk of industrial radiography. (author)

  2. Assessment of risk of potential exposures on facilities industries; Estimativa do risco de exposicao potencial em instalacoes industriais

    Energy Technology Data Exchange (ETDEWEB)

    Leocadio, Joao Carlos

    2007-03-15

    This work develops a model to evaluate potential exposures on open facilities of industrial radiography in Brazil. This model will decisively contribute to optimize operational, radiological protection and safety procedures, to prevent radiation accidents and to reduce human errors in industrial radiography. The probabilistic safety assessment (PSA) methodology was very useful to assess potential exposures. The open facilities of industrial radiography were identified as the scenario to be analyzed in what concerns the evaluation of potential exposures, due to their high accidents indices. The results of the assessment of potential exposures confirm that the industrial radiography in Brazil is a high-risk practice as classified by the IAEA. The risk of potential exposure was estimated to be 40,5 x 10{sup -2} per year in Brazil, having as main consequences injuries to the workers' hands and arms. In the world scene, the consequences are worst, leading to fatalities of people, thus emphasizing the high risk of industrial radiography. (author)

  3. Molecular Identification of Chronic Bee Paralysis Virus Infection in <em>Apis melliferaem> Colonies in Japan

    Directory of Open Access Journals (Sweden)

    Tomomi Morimoto

    2012-06-01

    Full Text Available Chronic bee paralysis virus (CBPV infection causes chronic paralysis and loss of workers in honey bee colonies around the world. Although CBPV shows a worldwide distribution, it had not been molecularly detected in Japan. Our investigation of <em>Apis melliferaem> and <em>Apis cerana japonicaem> colonies with RT-PCR has revealed CBPV infection in <em>A. melliferaem> but not <em>A. c. japonicaem> colonies in Japan. The prevalence of CBPV is low compared with that of other viruses: deformed wing virus (DWV, black queen cell virus (BQCV, Israel acute paralysis virus (IAPV, and sac brood virus (SBV, previously reported in Japan. Because of its low prevalence (5.6% in <em>A. melliferaem> colonies, the incidence of colony losses by CBPV infection must be sporadic in Japan. The presence of the (− strand RNA in dying workers suggests that CBPV infection and replication may contribute to their symptoms. Phylogenetic analysis demonstrates a geographic separation of Japanese isolates from European, Uruguayan, and mainland US isolates. The lack of major exchange of honey bees between Europe/mainland US and Japan for the recent 26 years (1985–2010 may have resulted in the geographic separation of Japanese CBPV isolates.

  4. Emergency Medical Service (EMS) Stations

    Data.gov (United States)

    Kansas Data Access and Support Center — EMS Locations in Kansas The EMS stations dataset consists of any location where emergency medical services (EMS) personnel are stationed or based out of, or where...

  5. Consumo de energia em escalonadores de transações em sistemas de memória transacional em software

    OpenAIRE

    Marques Junior, Ademir [UNESP

    2016-01-01

    O conceito de Memória Transacional foi criado para simplificar a sincronização de dados em memória, necessária para evitar a computação de dados inconsistentes por processadores multinúcleos, que se tornaram padrão devido às limitações encontradas em processadores de um núcleo. Em evolução constante pela busca de desempenho, os escalonadores de transação foram criados como alternativa aos gerenciadores de contenção presentes nos Sistemas de Memória Transacional. O consumo de energia é preocup...

  6. Studies on synthesis of diamond at high pressure and temperature

    Science.gov (United States)

    Kailath, Ansu J.

    Diamond is an essential material of modern industry and probably the most versatile abrasive available today. It also has many other industrial applications attributable to its unique mechanical, optical, thermal and electrical properties. Its usage has grown to the extent that there is hardly a production process in modern industry in which industrial diamond does not play a part. Bulk diamond production today is a major industry. Diamonds can be produced in its thermodynamically stable regions either by direct static conversion, or shock-wave conversion. The pressures and temperatures required for direct static conversion are very high. In the catalyst-solvent method, the material used establishes a reaction path with lower activation energy than for direct transformation. This helps in a quicker transformation under more benign conditions. Hence, catalyst-solvent synthesis is readily accomplished and is now a viable and successful industrial process. Diamonds produced by shock wave are very small (approximately 60mu). Therefore this diamond is limited to applications such as polishing compounds only. The quality, quantity, size and morphology of the crystals synthesized by catalyst-solvent process depend on different conditions employed for synthesis. These details, because of commercial reasons are not disclosed in published literature. Hence, systematic studies have been planned to investigate the effect of various growth parameters on the synthesized crystals. During the growth of synthetic diamond crystals, some catalyst-solvent is retained into the crystals in some form and behaves like an impurity. Several physico-mechanical properties of the crystals are found to depend on the total quantity and distribution of these inclusions. Thus, detailed investigation of the crystallization medium and inclusions in synthesized diamonds was also undertaken in the present work. The work incorporated in this thesis has been divided into seven chapters. The first

  7. Estratégia e estrutura: em busca do alinhamento organizacional em um clube social esportivo

    OpenAIRE

    Cruz Junior,Augusto de Toledo; Carvalho,Marly Monteiro de; Laurindo,Fernando José Barbin

    2005-01-01

    A literatura descreve tipologias de formas organizações, que podem ser divididas em organização baseada em trabalho e organização baseada em conhecimento. A forma de representação mais utilizada é o organograma. Contudo, esta forma de representação não consegue ilustrar adequadamente a dinâmica de funcionamento da organização, sobretudo em organizações em que o conhecimento e a experiência são os ativos-chave. Com o objetivo de investigar o processo de alinhamento entre estratégia e estrutura...

  8. Demanda de informação pelo setor industrial: dois estudos no intervalo de 25 anos

    OpenAIRE

    Araujo, Vania M. R. Hermes de; Freire, Isa Maria; Mendes, Teresa Cristina M.

    1997-01-01

    Os estudos sobre a demanda de informação dos usuários do setor produtivo industrial tornam-se cada vez mais necessários, à medida que a informação se estabelece como fator/insumo de produção. Neste trabalho, são analisados, comparativamente, dois estudos em nível nacional, separados por um intervalo de tempo de 25 anos. Neles, pode-se observar semelhanças e diferenças, sendo possível distinguir quais os tipos de informação mais relevantes para o setor industrial, nas respectivas etapas histór...

  9. The Complete Mitochondrial Genome of the Pink Stem Borer, <em>Sesamia inferensem>, in Comparison with Four Other Noctuid Moths

    Directory of Open Access Journals (Sweden)

    Yu-Zhou Du

    2012-08-01

    Full Text Available The complete 15,413-bp mitochondrial genome (mitogenome of <em>Sesamia inferensem> (Walker (Lepidoptera: Noctuidae was sequenced and compared with those of four other noctuid moths. All of the mitogenomes analyzed displayed similar characteristics with respect to gene content, genome organization, nucleotide comparison, and codon usages. Twelve-one protein-coding genes (PCGs utilized the standard ATN, but the <em>cox1 em>gene used CGA as the initiation codon; <em>cox1em>, <em>cox2em>, and <em>nad4em> genes had the truncated termination codon T in the <em>S. inferens em>mitogenome. All of the tRNA genes had typical cloverleaf secondary structures except for <em>trnS1(AGNem>, in which the dihydrouridine (DHU arm did not form a stable stem-loop structure. Both the secondary structures of <em>rrnL> and <em>rrnS> genes inferred from the <em>S. inferens em>mitogenome closely resembled those of other noctuid moths. In the A+T-rich region, the conserved motif “ATAGA” followed by a long T-stretch was observed in all noctuid moths, but other specific tandem-repeat elements were more variable. Additionally, the <em>S. inferens em>mitogenome contained a potential stem-loop structure, a duplicated 17-bp repeat element, a decuplicated segment, and a microsatellite “(AT7”, without a poly-A element upstream of the<em> trnM em>in the A+T-rich region. Finally, the phylogenetic relationships were reconstructed based on amino acid sequences of mitochondrial 13 PCGs, which support the traditional morphologically based view of relationships within the Noctuidae.

  10. Screening Commercially Available Entomopathogenic Biocontrol Agents for the Control of <em>Aethina tumidaem> (Coleoptera: Nitidulidae in the UK

    Directory of Open Access Journals (Sweden)

    Giles E. Budge

    2012-08-01

    Full Text Available The Small hive beetle, <em>Aethina tumidaem>, is an invasive pest of honey bees. Indigenous to sub-Saharan Africa, it has now become established in North America and Australia. It represents a serious threat to European honey bees. Commercially available entomopathogenic agents were screened for their potential to control beetle larvae. Entomopathogenic fungi investigated had minimal impact. The nematodes <em>Steinernema> krausseiem> and <em>S. carpocapsaeem> provided excellent control with 100% mortality of larvae being obtained. Sequential applications of the nematodes following larvae entering sand to pupate also provided excellent control for up to 3 weeks. The information gained supports the development of contingency plans to deal with <em>A. tumidaem> should it occur in the UK, and is relevant to the management of Small hive beetle where it is already present.

  11. Co-Autoria em Ensino e Pesquisa em Administração e Contabilidade no Brasil: Uma Década em Análise

    Directory of Open Access Journals (Sweden)

    Lélis Balestrin Espartel

    2011-12-01

    Full Text Available Uma das principais tendências verificadas nos últimos anos é o aumento da colaboração científica, caracterizada pela co-autoria. Muitos autores destacam a importância do tema e indicam o crescimento da co-autoria na produção acadêmica. Entretanto, em âmbito nacional, nenhum trabalho considerou a análise de co-autoria no campo da Administração. Com base nisso, este estudo, de caráter bibliométrico, analisou os artigos publicados em co-autoria nos anais dos congressos promovidos pela ANPAD no período entre 2001 e 2010, perfazendo 12 eventos: 10 Encontros da ANPAD (EnANPAD e 2 Encontros de Ensino e Pesquisa em Administração e Contabilidade (EnEPQ. Ao total foram investigados 778 trabalhos. De uma forma geral, nota-se que grande parte dos trabalhos conduzidos em Administração no Brasil, na última década, utiliza a co-autoria. Quanto ao formato dos artigos, observa-se que a co-autoria prevalece nos estudos empíricos, enquanto os estudos teóricos são desenvolvidos, em sua maioria, por um único autor. No caso dos trabalhos teóricos, elaborados em co-autoria, nota-se, em média, um número menor de autores do que em trabalhos empíricos. Dentre os empíricos realizados em co-autoria, também há diferenças significativas, sendo que os trabalhos quantitativos apresentaram uma média de autores superior a dos artigos qualitativos. Também foi realizada uma análise da rede formada pelas 197 IES identificadas, fazendo considerações sobre a sua densidade, distância geodésica média, centralização e proximidade entre os elos. Acrescido a estas análises, discussões e considerações a respeito da co-autoria em Administração também são apresentadas no artigo. Sugestões de pesquisas futuras são propostas.

  12. Impacto das políticas de fomento à inovação no Brasil sobre o gasto em atividades inovativas e em atividades de P&D das empresas

    Directory of Open Access Journals (Sweden)

    Ana Paula Avellar

    2009-09-01

    Full Text Available A política tecnológica representa, na atualidade, parte central da agenda econômica nos países desenvolvidos e nos países emergentes. O trabalho pretende realizar um exercício empírico de avaliação de impacto de programas de incentivos fiscais e incentivos financeiros do Brasil, na realização de atividades inovativas e de atividades de P&D das empresas, quais sejam: um programa de incentivo fiscal, o Programa de Desenvolvimento Tecnológico Industrial (PDTI; um programa de incentivo financeiro reembolsável, o Programa de Apoio ao Desenvolvimento Tecnológico da Empresa Nacional (ADTEN e um programa de incentivo financeiro não reembolsável, o Fundo Nacional de Desenvolvimento Científico e Tecnológico (FNDCT Cooperativo. Para capturar os efeitos no comportamento das empresas beneficiárias em relação às não beneficiárias será aplicado o método Propensity Score Matching. O estudo conclui que os programas estimularam os gastos em atividades inovativas e em atividades de P&D das empresas beneficiárias.Technology policies have been part of economical agenda in the developed countries as well as in the periphery. The generalized use of these incentives has culminated in a large international discussion questioning its effective capacity to stimulate (or not the benefited companies. This work intends to develop an evaluating empirical exercise of three Brazilian programs of tax incentives and financial incentives to technological activities: Industrial Technological Developing Program (PDTI, National Fund for Scientific and Technological Development (FNDCT and the Support Program for Technological Development of National Companies (ADTEN. In order to capture the effects of these programs on the behavior of benefited companies in relation to those which were not benefited, concerning the decision of expenses in technological activities and to innovative effort, an econometric method will be applied the Propensity Score Matching

  13. Estabilidade oxidativa de óleo de peixe encapsulado em diferentes tipos de embalagem em condição ambiente Encapsulated fish oil oxidative stability stored in different types of packing under ambient conditions

    Directory of Open Access Journals (Sweden)

    Selma Guidorizzi Antonio Pacheco

    2009-12-01

    Full Text Available Os óleos de peixes de clima frio têm atraído a atenção do consumidor graças à presença de ácidos graxos ômega três de cadeia longa. São uma rica fonte de ácidos graxos poli-insaturados, EPA e DHA, de ação hipocolesterolêmica reconhecida, que reduz sua estabilidade oxidativa, podendo comprometer a qualidade e funcionalidade. Essa pesquisa teve como objetivo estudar a estabilidade de óleo de peixe em cápsulas de gelatina moles acondicionadas em diferentes tipos de embalagens: metade das cápsulas em blísters e metade em frascos. A emblistagem foi realizada com os filmes de policlorotrifluoroetileno (PCTFE, comercializado sob o nome Aclar Rx 160 (15 μm, cloreto de polivinilideno (PVDC-60 gsm² e policloreto de vinila (PVC-250 μm, perfazendo três tratamentos. A outra metade das cápsulas foi acondicionada em frascos de polietileno de alta densidade (PEAD com e sem sachês de sílica e de vidro de cor âmbar. Cada embalagem continha 60 cápsulas que foram armazenadas em triplicata à temperatura ambiente por 12 meses. O óleo foi analisado a cada 28 dias quanto ao índice de acidez, de peróxido e absortividade em 232 e 270 nm. A composição em ácidos graxos, especialmente quanto aos teores de EPA e DHA, foi determinada. A embalagem que apresentou as maiores alterações na qualidade do óleo foi o filme de PVC. Os melhores resultados foram obtidos com os frascos de PEAD com dessecante de sílica. Os teores de DHA e EPA mantiveram-se estáveis em todas as amostras.Due to the presence of long chained omega three fatty acids, fish oils have gathered much interest recently. Fish oils such as eicosapentaenoic acid (EPA and docosahexaenoic acid (DHA are a rich source of polyunsaturated fatty acids (PUFA like eicosapentaenoic acid (EPA and docosahexaenoic acid (DHA, which reduce blood triacylglycerol and cholesterol levels. However, the higher the unsaturation level, the less stable is the oil which may haveits functionality reduced

  14. Cloning, Phylogenetic Analysis and 3D Modeling of a Putative Lysosomal Acid Lipase from the Camel, <em>Camelus dromedariusem>

    Directory of Open Access Journals (Sweden)

    Farid Shokry Ataya

    2012-08-01

    Full Text Available Acid lipase belongs to a family of enzymes that is mainly present in lysosomes of different organs and the stomach. It is characterized by its capacity to withstand acidic conditions while maintaining high lipolytic activity. We cloned for the first time the full coding sequence of camel’s lysosomal acid lipase, <em>cLIPA em>using RT-PCR technique (Genbank accession numbers JF803951 and AEG75815, for the nucleotide and aminoacid sequences respectively. The cDNA sequencing revealed an open reading frame of 1,197 nucleotides that encodes a protein of 399 aminoacids which was similar to that from<em> em>other related mammalian species. Bioinformatic analysis was used to determine the aminoacid sequence, 3D structure and phylogeny of cLIPA. Bioinformatics analysis suggested the molecular weight of the translated protein to be 45.57 kDa, which could be decreased to 43.16 kDa after the removal of a signal peptide comprising the first 21 aminoacids. The deduced <em>cLIPA em>sequences exhibited high identity with <em>Equus caballus em>(86%, <em>Numascus leucogenysem> (85%, <em>Homo sapiensem> (84%,<em> Sus scrofaem> (84%, <em>Bos taurus em>(82% and <em>Ovis aries em>(81%. cLIPA shows high aminoacid sequence identity with human and dog-gastric lipases (58%, and 59% respectively which makes it relevant to build a 3D structure model for cLIPA. The comparison confirms the presence of the catalytic triad and the oxyanion hole in cLIPA. Phylogenetic analysis revealed that camel <em>cLIPA em>is grouped with monkey, human, pig, cow and goat. The level of expression of <em>cLIPA em>in five camel tissues was examined using Real Time-PCR. The highest level of <em>cLIPA em>transcript was found in the camel testis (162%, followed by spleen (129%, liver (100%, kidney (20.5% and lung (17.4%.

  15. Life cycle and sustainability of abrasive tools

    CERN Document Server

    Linke, Barbara

    2016-01-01

    This monograph focuses on abrasive tools for grinding, polishing, honing, and lapping operations. The book describes the life cycle of abrasive tools from raw material processing of abrasive grits and bonding, manufacturing of monolithic or multi-layered tools, tool use to tool end-of-life. Moreover, this work highlights sustainability challenges including economic, environmental, social and technological aspects. The target audience primarily comprises research and industry experts in the field of manufacturing, but the book may also be beneficial for graduate students.

  16. Production and partial characterization of lipase from Penicillium verrucosum obtained by submerged fermentation of conventional and industrial media Produção e caracterização parcial de lipase obtida por fermentação submersa de Penicillium verrucosum utilizando meio convencional e industrial

    Directory of Open Access Journals (Sweden)

    Thaís da Luz Fontoura Pinheiro

    2008-06-01

    Full Text Available The growing interest in lipase production is related to the potential biotechnological applications that these enzymes present. Current studies on lipase production by submerged fermentation involve the use of agro-industrial residues aiming at increasing economic attractiveness. Based on these aspects, the objective of this work was to investigate lipase production by Penicillium verrucosum in submerged fermentation using a conventional medium based on peptone, yeast extract, NaCl and olive oil, and an industrial medium based on corn steep liquor, Prodex Lac (yeast hydrolysate, NaCl and olive oil, as well as to characterize the crude enzymatic extracts obtained. Kinetics of lipase production was evaluated and the highest enzymatic activities, of 3.15 and 2.22 U.mL-1, were observed when conventional and industrial media were used, respectively. The enzymatic extract showed optimal activity in the range from 30 to 40 °C and at pH 7.0. Although the industrial medium presents economical advantages over the conventional medium, the presence of agro-industrial residues rich in nitrogen and other important nutrients seemed to contribute to a reduction in lipase activity.O grande interesse atual na produção de lipases está relacionado às potenciais aplicações biotecnológicas que estas enzimas apresentam. Estudos relevantes referentes à produção de lipases por fermentação submersa envolvem o uso de resíduos agroindustriais objetivando diminuir o custo de produção do biocatalisador. Com base nestes aspectos, o objetivo deste trabalho foi investigar a produção de lipases por Penicillium verrucosum em fermentação submersa utilizando meio convencional (peptona, extrato de levedura, NaCl e óleo de oliva e industrial (água de maceração de milho, Prodex Lac (hidrolisado de levedura, NaCl e óleo de oliva, bem como caracterizar parcialmente o extrato enzimático bruto obtido. A cinética de produção de lipases foi avaliada e as

  17. Hygienic-sanitary working practices and implementation of a Hazard Analysis and Critical Control Point (HACCP plan in lobster processing industries Condições higiênico-sanitárias e implementação do plano de Análise de Perigos e Pontos Críticos de Controle (APPCC em indústrias processadoras de lagosta

    Directory of Open Access Journals (Sweden)

    Cristina Farias da Fonseca

    2013-03-01

    Full Text Available This study aimed to verify the hygienic-sanitary working practices and to create and implement a Hazard Analysis Critical Control Point (HACCP) in two lobster processing industries in Pernambuco State, Brazil. The industries studied process frozen whole lobsters, frozen whole cooked lobsters, and frozen lobster tails for exportation. The application of the hygienic-sanitary checklist in the industries analyzed achieved conformity rates over 96% to the aspects evaluated. The use of the Hazard Analysis Critical Control Point (HACCP) plan resulted in the detection of two critical control points (CCPs) including the receiving and classification steps in the processing of frozen lobster and frozen lobster tails, and an additional critical control point (CCP) was detected during the cooking step of processing of the whole frozen cooked lobster. The proper implementation of the Hazard Analysis Critical Control Point (HACCP) plan in the lobster processing industries studied proved to be the safest and most cost-effective method to monitor each critical control point (CCP) hazards.Objetivou-se com este estudo verificar as condições higiênico-sanitárias e criar um plano de Análise de Perigos e Pontos Críticos de Controle (APPCC) para implantação em duas indústrias de processamento de lagosta no Estado de Pernambuco, Brasil. As indústrias estudadas processam lagosta inteira congelada, lagostas inteiras cozidas congeladas e caudas de lagosta congelada para exportação. A aplicação de um checklist de controle higiênico-sanitário nas indústrias visitadas resultou em uma classificação global de conformidades maior que 96% dos aspectos analisados. O desenvolvimento do plano APPCC resultou na detecção de dois pontos críticos de controle (PCC), incluindo o recebimento e etapas de classificação, no processamento de lagosta congelada e caudas de lagosta congelada, e um PCC adicional foi detectado no processamento de lagosta inteira cozida

  18. Paracoccidioidomicose em crianças em Belém do Pará

    Directory of Open Access Journals (Sweden)

    Fonseca Eliane R.S.

    1999-01-01

    Full Text Available No período janeiro de 1985 e julho de 1996 foram observados 102 casos de paracoccidioidomicose em hospital de Belém, PA. Treze pacientes eram crianças entre 3 e 13 anos de idade, com predomínio do sexo feminino (8:5. Todos apresentavam a forma disseminada subaguda da micose. É comentada a alta prevalência da micose em crianças em áreas endêmicas da Região Amazônica.

  19. APLICACIÓN DEL APRENDIZAJE BASADO EN PROBLEMAS EN INGENIERÍA APLICAÇÃO DA APRENDIZAGEM BASEADA EM PROBLEMAS EM ENGENHARIA PROBLEM-BASED LEARNING APPLICATION IN ENGINEERING

    Directory of Open Access Journals (Sweden)

    Maria Victoria Echavarria

    2010-12-01

    Full Text Available El aprendizaje basado en problemas es una estrategia pedagógica ampliamente utilizada en el mundo con el propósito de mejorar el aprendizaje de los estudiantes, quienes se convierten en el centro del proceso. Este artículo presenta el reporte de un caso que ilustra la aplicación, el proceso y sus resultados de aprendizaje basado en problemas (ABP durante cinco semestres consecutivos en el curso de Gestión y Control de Procesos perteneciente a las carreras de Ingeniería Industrial e Ingeniería Administrativa en Colombia. El papel del profesor y los resultados de los alumnos son elementos críticos en la evaluación del proceso de implementación de ABP.A aprendizagem baseada em problemas é uma estratégia pedagógica amplamente utilizada no mundo, com o objetivo de melhorar a aprendizagem dos alunos, que se tornam o centro do processo. Este artigo apresenta um relatório de um caso que ilustra a aplicação, o processo e os resultados da aprendizagem baseada em problemas (ABP durante cinco semestres consecutivos no curso de Gestão e Controle de Processos pertencente às carreiras de Engenharia Industrial e Engenharia Administrativa na Colômbia. O papel do professor e os resultados dos alunos são elementos críticos na avaliação do processo de implementação da PBL.Problem-based learning is a pedagogical strategy widely applied in many universities worldwide with the purpose of improving the learning out come of the students who become the center of the process. This paper presents a case report illustrating an experience, its evolving process and subsequent results of a problem-based learning (PBL application during five semesters in a Process Management and Control course for under graduate programs of Industrial Engineering and Management Engineering in Colombia. The teacher's role and student assessments are critical elements for the evaluation of the PBL implementation process.

  20. Development of Microsatellite Markers for the Korean Mussel, <em>Mytilus coruscusem> (Mytilidae Using Next-Generation Sequencing

    Directory of Open Access Journals (Sweden)

    Hye Suck An

    2012-08-01

    Full Text Available <em>Mytilus coruscusem> (family Mytilidae is one of the most important marine shellfish species in Korea. During the past few decades, this species has become endangered due to the loss of habitats and overfishing. Despite this species’ importance, information on its genetic background is scarce. In this study, we developed microsatellite markers for <em>M.> coruscusem> using next-generation sequencing. A total of 263,900 raw reads were obtained from a quarter-plate run on the 454 GS-FLX titanium platform, and 176,327 unique sequences were generated with an average length of 381 bp; 2569 (1.45% sequences contained a minimum of five di- to tetra-nucleotide repeat motifs. Of the 51 loci screened, 46 were amplified successfully, and 22 were polymorphic among 30 individuals, with seven of trinucleotide repeats and three of tetranucleotide repeats. All loci exhibited high genetic variability, with an average of 17.32 alleles per locus, and the mean observed and expected heterozygosities were 0.67 and 0.90, respectively. In addition, cross-amplification was tested for all 22 loci in another congener species, <em>M.> <em>galloprovincialis.> None of the primer pairs resulted in effective amplification, which might be due to their high mutation rates. Our work demonstrated the utility of next-generation 454 sequencing as a method for the rapid and cost-effective identification of microsatellites. The high degree of polymorphism exhibited by the 22 newly developed microsatellites will be useful in future conservation genetic studies of this species.

  1. Design of Higher-<em>k> and More Stable Rare Earth Oxides as Gate Dielectrics for Advanced CMOS Devices

    Directory of Open Access Journals (Sweden)

    Yi Zhao

    2012-08-01

    Full Text Available High permittivity (<em>k> gate dielectric films are widely studied to substitute SiO2 as gate oxides to suppress the unacceptable gate leakage current when the traditional SiO2 gate oxide becomes ultrathin. For high-<em>k> gate oxides, several material properties are dominantly important. The first one, undoubtedly, is permittivity. It has been well studied by many groups in terms of how to obtain a higher permittivity for popular high-<em>k> oxides, like HfO2 and La2O3. The second one is crystallization behavior. Although it’s still under the debate whether an amorphous film is definitely better than ploy-crystallized oxide film as a gate oxide upon considering the crystal boundaries induced leakage current, the crystallization behavior should be well understood for a high-<em>k> gate oxide because it could also, to some degree, determine the permittivity of the high-<em>k> oxide. Finally, some high-<em>k> gate oxides, especially rare earth oxides (like La2O3, are not stable in air and very hygroscopic, forming hydroxide. This topic has been well investigated in over the years and significant progresses have been achieved. In this paper, I will intensively review the most recent progresses of the experimental and theoretical studies for preparing higher-<em>k> and more stable, in terms of hygroscopic tolerance and crystallization behavior, Hf- and La-based ternary high-<em>k> gate oxides.

  2. Syntheses of Enantiopure Aliphatic Secondary Alcohols and Acetates by Bioresolution with Lipase B from <em>Candida antarcticaem>

    Directory of Open Access Journals (Sweden)

    Richele P. Severino

    2012-07-01

    Full Text Available The lipase B from <em>Candida antarcticaem> (Novozym 435®, CALB efficiently catalyzed the kinetic resolution of some aliphatic secondary alcohols: (±-4-methylpentan-2-ol (1, (±-5-methylhexan-2-ol (3, (±-octan-2-ol (4, (±-heptan-3-ol (5 and (±-oct-1-en-3-ol (6. The lipase showed excellent enantioselectivities in the transesterifications of racemic aliphatic secondary alcohols producing the enantiopure alcohols (>99% <em>ee> and acetates (>99% <em>ee> with good yields. Kinetic resolution of <em>rac>-alcohols was successfully achieved with CALB lipase using simple conditions, vinyl acetate as acylating agent, and hexane as non-polar solvent.

  3. A poliomielite em Sergipe

    Directory of Open Access Journals (Sweden)

    Hélio A. Oliveira

    1994-06-01

    Full Text Available Os autores apresentam estudo retrospectivo da poliomielite em Sergipe. Dividem o estudo em três períodos levando em consideração a taxa de notificação de casos positivos e enfatizam o período que vai de 1979 a 1989, pelo estudo de 159 casos consecutivos. As seguintes informações foram levantadas para cada caso: sexo, idade, procedência, estado vacinai anterior e evolução clínica. São também avaliadas a incidência anual, relação incidência/cobertura vacinai e distribuição geográfica. Tecem comentários sobre os surtos epidêmicos ocorridos em 1984 e 1986, sobre as alterações na circulação do poliovírus selvagem (P1 para P3 e sobre problemas relacionados à não aquisição de imunidade em crianças com esquema vacinal completo. Consideram a poliomielite controlada no Estado, mas enfatizam a necessidade de manutenção de Vigilância epidemiológica efetiva para todos os casos de paralisia aguda e flácida em menores de 14 anos de idade.

  4. DE PAISAGENS PASTORAIS PARA ESCURIDÃO ATERRORIZANTE: ESPAÇO E SUBJETIVIDADE EM THE MYSTERIES OF UDOLPHO

    Directory of Open Access Journals (Sweden)

    Natália Prado (UFSM

    2013-11-01

    Full Text Available

    O final do século XVIII na Inglaterra foi marcado pelo início da consolidação de um novo gênero literário, o romance. Este gênero já se destacava na época pela participação significativa das mulheres, tanto como leitoras como escritoras. Este fato foi provavelmente encorajado, entre outros aspectos, pela Revolução Industrial que reorganizou e mudou inúmeros aspectos da vida doméstica e conjugal. Neste contexto, o Romance Gótico foi um dos tipos de romance mais populares e Ann Radcliffe, a romancista mais renomada. Esse artigo discute <em>The Mysteries of Udolphoem> (1794, quarto livro escrito por Radcliffe, com foco na análise do espaço. O espaço é apresentado e descrito em detalhe ao longo da narrativa, o que evidencia sua importância neste romance. Os dois tipos de espaço, doméstico e externo, são analisados a fim de compreendermos a sua função neste romance.

  5. Compostos bioativos em polpas de mangas 'rosa' e 'espada' submetidas ao branqueamento e congelamento

    Directory of Open Access Journals (Sweden)

    Lucimara Piauí Soares

    2013-06-01

    Full Text Available A manga (Mangifera indica L. constitui uma importante fonte de compostos bioativos, dentre os quais se destacam os carotenoides e a vitamina C, que contribuem para a promoção da saúde. Vários métodos podem ser utilizados para conservação de alimentos a fim de aproveitar melhor os frutos durante a safra e permitir seu armazenamento fora de época de produção. No entanto, podem alterar a qualidade nutricional do alimento. Dessa forma, sendo o branqueamento e o congelamento métodos que são utilizados no processamento industrial para conservação de polpas de frutas, objetivou-se, neste trabalho, analisar a influência do branqueamento e do congelamento sobre os teores de carotenoides totais e ácido ascórbico em mangas 'Rosa' e 'Espada' em relação ao tempo de armazenamento. As mangas no estádio maduro, após serem colhidas, lavadas, cortadas e despolpadas, foram submetidas ao congelamento (-18ºC ou branqueamento por imersão em água (75ºC, por 3 minutos ou branqueamento por vapor em água fervente, por 3 minutos. Em seguida, foram realizadas as determinações bioquímicas dos teores de carotenoides totais e ácido ascórbico no tempo zero e após 20; 40 e 60 dias de armazenamento sob congelamento. Após análise dos resultados obtidos, conclui-se que, na forma in natura (tempo zero, as variedades Rosa e Espada apresentam os máximos teores de ácido ascórbico, porém o uso do branqueamento com vapor e o congelamento após 60 dias de armazenamento provocam perdas de, respectivamente, 53% ('Rosa' e 35% ('Espada'; 72% ('Rosa' e 60% ('Espada' destes compostos. No branqueamento por imersão em água, há perda completa do ácido ascórbico nas polpas das variedades Rosa e Espada. Em relação aos carotenoides totais, os valores foram semelhantes em polpas branqueadas a vapor e sem branqueamento no tempo zero,com tendência de redução durante o longo da armazenagem.

  6. Technical and Regulatory Considerations in Using Freight Containers as Industrial Packages

    Energy Technology Data Exchange (ETDEWEB)

    Hawk, Mark B [ORNL; Opperman, Erich [Washington Savannah River Company; Natali, Ronald [R. B. Natali Consulting, Inc.

    2008-01-01

    The US Department of Energy (DOE), Office of Environmental Management (EM), is actively pursuing activities to reduce the radiological risk and clean up the environmental legacy of the nation's nuclear weapons programmes. The EM has made significant progress in recent years in the clean-up and closure of sites and is also focusing on longer term activities necessary for the completion of the clean-up programme. The packaging and transportation of contaminated demolition debris and low level waste materials in a safe and cost effective manner are essential in completing this mission. Toward this end, the US Department of Transportation's Final Rule on Hazardous Materials Regulation issued on 26 January 2004, included a new provision authorising the use of freight containers (e.g. 20 and 40 ft ISO containers) as industrial packages type 2 or 3. This paper will discuss the technical and regulatory considerations in using these newly authorised and large packages for the packaging and transportation of low level waste materials.

  7. Determinação de hemogregarina em Boa constrictor constrictor mantidos em cativeiro

    Directory of Open Access Journals (Sweden)

    Monique A. Luz

    2012-08-01

    Full Text Available O presente estudo teve como objetivo determinar a presença de hemogregarina em boídeos mantidos em cativeiro no Estado do Pará, bem como, relacionar a hemoparasitose com pre-disposição sexual, alterações clínicas e hematológicas e a presença de ectoparasitos. Esta pesquisa teve autorização do Sistema de Autorização e Informação em Biodiversidade do Instituto Brasileiro do Meio Ambiente e dos Recursos Naturais Renováveis para ser realizado. Utilizaram-se 19 serpentes da família Boidae mantidas em cativeiro, pertencentes ao "Museu Paraense Emilio Goeldi" (Belém/PA e "Sítio Xerimbabo" (Santo Antônio do Tauá/PA. A pesquisa de hemogregarina foi realizada em esfregaços sanguíneos examinados no aumento de 400x, enquanto que a parasitemia foi determinada contando- se 550 hemácias em aumento de 1000x. Do total de animais estudados (n=19, nove encontraram-se parasitados (47,36%, não havendo correlação entre presença de hemogregarina, pré-disposição sexual, alterações clínicas e hematológicas nas serpentes hospedeiras. A correlação da hemoparasitose foi detectada apenas quanto à presença de ectoparasitas nas serpentes, no entanto, estudos adicionais são necessários para verificar a prevalência de hemogregarinas em animais mantidos em cativeiro no Estado do Pará, visto que, existe grande lacuna de dados na literatura veterinária especializada no que diz respeito à fauna da região amazônica.

  8. RENDENÇÃO E CONFORMISMO EM UMA LINDA MULHER Redenção e conformismo em Uma Linda Mulher

    Directory of Open Access Journals (Sweden)

    Alexander Martins Vianna

    2011-07-01

    Full Text Available

    Este artigo pretende demonstrar a forma como os temas da rendenção individual e do conformismo social são acionados no desenvolvimento da trama nostálgica e na caracterização dos personagens principais do filme “<em style="mso-bidi-font-style: normal;">Uma Linda Mulherem>”, assim como, visa a demonstrar o quanto que tais temas estão referidos a um <em style="mso-bidi-font-style: normal;">habitusem> <em style="mso-bidi-font-style: normal;">culturalem> que determina escolhas conjunturais de estereótipos raciais/morais e de formas estéticas que configuram um tipo de emoção para o enredo que leva à aceitação da <em style="mso-bidi-font-style: normal;">solução caridosa burguesa em>‘ style="mso-bidi-font-style: normal;">Middle Classem>’, em chave protestante, de resgate moral e mobilidade social.

    Este artigo pretende demonstrar a forma como os temas da rendenção individual e do conformismo social são acionados no desenvolvimento da trama nostálgica e na caracterização dos personagens principais do filme “<em style="mso-bidi-font-style: normal;">Uma Linda Mulherem>”, assim como, visa a demonstrar o quanto que tais temas estão referidos a um <em style="mso-bidi-font-style: normal;">habitusem> <em style="mso-bidi-font-style: normal;">culturalem> que determina escolhas conjunturais de estereótipos raciais/morais e de formas estéticas que configuram um tipo de emoção para o enredo que leva à aceitação da <em style

  9. Introgression Between Cultivars and Wild Populations of<em> Momordica charantiaem> L. (Cucurbitaceae in Taiwan

    Directory of Open Access Journals (Sweden)

    Yu-Chung Chiang

    2012-05-01

    Full Text Available The landrace strains of <em>Momordica charantia em>are widely cultivated vegetables throughout the tropics and subtropics, but not in Taiwan, a continental island in Southeast Asia, until a few hundred years ago. In contrast, the related wild populations with smaller fruit sizes are native to Taiwan. Because of the introduction of cultivars for agricultural purposes, these two accessions currently exhibit a sympatric or parapatric distribution in Taiwan. In this study, the cultivars<em> em>and wild samples from Taiwan, India, and Korea<em> em>were collected for testing of their hybridization and evolutionary patterns. The cpDNA marker showed a clear distinction between accessions of cultivars and wild populations of Taiwan and a long divergence time. In contrast, an analysis of eight selectively neutral nuclear microsatellite loci did not reveal a difference between the genetic structures of these two accessions. A relatively short divergence time and frequent but asymmetric gene flows were estimated based on the isolation-with-migration model. Historical and current introgression from cultivars to wild populations of Taiwan was also inferred using MIGRATE-n and BayesAss analyses. Our results showed that these two accessions shared abundant common ancestral polymorphisms, and the timing of the divergence and colonization of the Taiwanese wild populations is consistent with the geohistory of the Taiwan Strait land bridge of the Last Glacial Maximum (LGM. Long-term and recurrent introgression between accessions indicated the asymmetric capacity to receive foreign genes from other accessions. The modern introduction of cultivars of <em>M>. <em>charantia> during the colonization of Taiwan by the Han Chinese ethnic group enhanced the rate of gene replacement in the native populations and resulted in the loss of native genes.

  10. Humoral and cell-mediated immune responses to influenza vaccination in equine metabolic syndrome (EMS) horses.

    Science.gov (United States)

    Elzinga, Sarah; Reedy, Stephanie; Barker, Virginia D; Chambers, Thomas M; Adams, Amanda A

    2018-05-01

    Obesity is an increasing problem in the equine population with recent reports indicating that the percentage of overweight horses may range anywhere from 20.6-51%. Obesity in horses has been linked to more serious health concerns such as equine metabolic syndrome (EMS). EMS is a serious problem in the equine industry given its defining characteristics of insulin dysregualtion and obesity, as well as the involvement of laminitis. Little research however has been conducted to determine the effects of EMS on routine healthcare of these horses, in particular how they respond to vaccination. It has been shown that obese humans and mice have decreased immune responses to vaccination. EMS may have similar effects on vaccine responses in horses. If this is the case, these animals may be more susceptible to disease, acting as unknown disease reservoirs. Therefore, we investigated the effects of EMS on immune responses to routine influenza vaccination. Twenty-five adult horses of mixed-sex and mixed-breed (8-21 years old) horses; 13 EMS and 12 non-EMS were selected. Within each group, 4 horses served as non-vaccinate saline controls and the remaining horses were vaccinated with a commercially available equine influenza vaccine. Vaccination (influenza or saline) was administered on weeks 0 and 3, and peripheral blood samples taken on week 0 prior to vaccination and on weeks 1, 2, 3, 4, and 5 post vaccination. Blood samples were used to measure hemagglutination inhibition (HI) titers and equine influenza specific IgGa, IgGb, and IgGT levels. Blood samples were also used to isolate peripheral blood mononuclear cells (PBMCs) for analysis of cell mediated immune (CMI) responses via real-time polymerase chain reaction (RT-PCR). All horses receiving influenza vaccination responded with significant increases (P equine influenza specific antibodies following vaccination compared to saline controls. EMS did not significantly affect (P > 0.05) humoral immune responses as measured

  11. Microbial assisted phyto extraction of metals and growth of soybean (glycine max l. merrill) on industrial waste water contaminated soil

    International Nuclear Information System (INIS)

    Ali, I.; Bano, A.

    2012-01-01

    Pots experiments were made to investigate the role of effective microorganisms (EM) in improving phyto extraction of metals (Cd/sup +2/ and Mn/sup +2/) and growth of soybean plant in industrial waste water polluted soil. Waste water applications to soil were made in four different dilutions (i.e. 25%, 50%, 75% and 100%). Effective microorganisms were added into waste water prior to application. Effect of treatments on growth parameters was studied. The Cd/sup +2/ and Mn/sup +2/ concentrations in different parts of plant were measured by Atomic Absorption Spectrophotometer. Plant height significantly increased at all treatments except at 25% waste water treatment. Plant dry biomass and oil contents in seed significantly increased with all treatments compared to control but were higher at low concentration of waste water. Waste water treatments significantly increased the Cd and Mn accumulation in plant while inoculation of EM further enhanced the metals accumulation. The maximum accumulation of Cd and Mn found in plant treated with 100% waste water in combination with effective microorganisms. At harvest, the Cd/sup +2/ concentration decreased in leaves but increased in roots followed by stem > seeds, while, Mn/sup +2/ accumulation increased in leaves followed by roots > stem > seeds. Conclusively, EM enhanced the phyto extraction of Cd and Mn and also increased the oil contents in soybean on polluted soil. These findings suggest further investigation to find out a suitable concentration of industrial waste water in combination with EM for better growth of soybean and improving phyto extraction of metals. (author)

  12. Extraction Optimization of Water-Extracted Mycelial Polysaccharide from Endophytic Fungus <em>Fusarium oxysporumem> Dzf17 by Response Surface Methodology

    Directory of Open Access Journals (Sweden)

    Ligang Zhou

    2012-05-01

    Full Text Available Water-extracted mycelial polysaccharide (WPS from the endophytic fungus <em>Fusarium oxysporumem> Dzf17 isolated from <em>Dioscorea zingiberensisem> was found to be an efficient elicitor to enhance diosgenin accumulation in<em> D. zingigerensisem> cultures, and also demonstrated antioxidant activity. In this study, response surface methodology (RSM was employed to optimize the extraction process of WPS from <em>F>. oxysporumem> Dzf17 using Box-Behnken design (BBD. The ranges of the factors investigated were 1–3 h for extraction time (<em>X>1, 80–100 °C for extraction temperature (<em>X>2, and 20–40 (v/w for ratio of water volume (mL to raw material weight (g (<em>X>3. The experimental data obtained were fitted to a second-order polynomial equation using multiple regression analysis. Statistical analysis showed that the polynomial regression model was in good agreement with the experimental results with the determination coefficient (<em>R>2 of 0.9978. By solving the regression equation and analyzing the response surface contour plots, the extraction parameters were optimized as 1.7 h for extraction time, 95 °C for extraction temperature, 39 (v/w for ratio of water volume (mL to raw material weight (g, and with 2 extractions. The maximum value (10.862% of WPS yield was obtained when the WPS extraction process was conducted under the optimal conditions.

  13. Terapia pulpar em dentes decíduos: possibilidades terapêuticas baseadas em evidências

    Directory of Open Access Journals (Sweden)

    Natalino Lourenço Neto

    Full Text Available INTRODUÇÃO: A pulpotomia em dentes decíduos é uma técnica conservadora de terapia pulpar amplamente utilizada em Odontopediatria, sendo de fundamental importância para evitar a perda prematura desses dentes, quer seja por alterações provocadas pela cárie dentária ou traumatismo dentário. Apesar de ser uma técnica estudada há muitos anos, causa muitas controvérsias e discussões, principalmente em termos de biocompatibilidade dos medicamentos empregados e pelas dificuldades e falhas no diagnóstico da condição pulpar. OBJETIVO: Por meio de uma revisão sistemática da literatura, no período compreendido entre 2000 e 2011, e co